Perfluoroalkyl polytriazines containing pendent iododifluoromethyl groups

NASA Technical Reports Server (NTRS)

Rosser, R. W.; Psarras, T. (Inventor)

1980-01-01

New perfluoroalkyl polytriazines containing pendent iododifluoromethyl groups are prepared by the reaction of perfluoroalkyl dinitriles with ammonia to form poly(imidoylamidines), followed by the cyclization of the imidoylamidine groups with, e.g., various mixtures of a perfluoroacyl fluoride with an omega iodoperfluoroacyl fluoride. The polytriazines obtained can be cured by heat which causes crosslinking at the iododifluoromethyl groups by elimination of iodine and formation of carbon-to-carbon bonds.

Thermoplastic composite matrices with improved solvent resistance

NASA Technical Reports Server (NTRS)

Hergenrother, P. M.; Jensen, B. J.; Havens, S. J.

1984-01-01

In order to improve solvent resistance of aromatic thermoplastic polymers, ethynyl-terminated aromatic sulfone polymers (ETS), sulfone/ester polymers (SEPE) containing pendent ethynyl groups, and phenoxy resin containing pendent ethynyl groups are synthesized. Cured polysulfones and phenoxy resins containing ethynyl groups on the ends or pendent on the molecules exhibited systematic behavior in solvent resistance, film flexibility, and toughness as a function of crosslink density. The film and composite properties of a cured solvent-resistant ETS were better than those of a commercially available solvent sensitive polysulfone. The study was part of a NASA program to better understand the trade-offs between solvent resistance, processability and mechanical properties which may be useful in designing composite structures for aerospace vehicles.

The Electronic Structure and Spectra of Triphenylamines Functionalized by Phenylethynyl Groups

NASA Astrophysics Data System (ADS)

Baryshnikov, G. V.; Minaeva, V. A.; Minaev, B. F.; Grigoras, M.

2018-01-01

We study the features of the electronic structure and the IR, UV, and visible spectra of a series of triphenylamines substituted with phenylethynyl groups. The analysis is performed at the level of the density functional theory (DFT) and its nonstationary version in comparison with the experimental data of IR and electron spectroscopy. It is shown that, in the excited state, there is a change in the alternation of single, double, and triple bonds in accordance with the character of bonding and antibonding in the lowest vacant molecular orbital. The gradual introduction of additional phenylethynyl groups does not cause frequency shifts in the IR spectra of the molecules under study, but significantly affects the intensity of the corresponding IR bands. A similar effect is also observed in the electronic-absorption spectra of these compounds. This can be used for optical tuning of triphenylamines as promising materials for organic light-emitting diodes and solar cells.

Synthesis of perfluorinated polyethers. [for sealers

NASA Technical Reports Server (NTRS)

Depasquale, R. J.; Padgett, C. D.; Patton, J. R.; Psarras, T.

1982-01-01

A series of highly fluorinated acetylenes was prepared and their cyclization reactions were studied. A series of perfluoropolytriazines with -CF2I pendent groups were prepared. These materials can be cured thermally or photochemically to an elastomeric gum. Perfluoropolytriazines with -CN pendent groups were prepared. These materials can be crosslinked by reaction with terephthalonitrile oxide.

The 5-(4-Ethynylophenoxy) isophthalic chloride

NASA Technical Reports Server (NTRS)

Hergenrother, P. M.; Jensen, B. J. (Inventor)

1986-01-01

Sulfone-ester polymers containing pendent ethynyl groups and a direct and multistep process for preparing them are disclosed. The multistep process involves the conversion of a pendent bromo group to the ethynyl group while the direct route involves reating hydroxy-terminated sulfone oligomer or polymers with a stoichiometric amount of 5-(4-ethynylphenoxy) isophthaloyl chloride. The 5-(4-ethynylphenoxy) isophthaloyl chloride and the process for preparing it are also disclosed.

Phenylethynyl amine

NASA Technical Reports Server (NTRS)

Hergenrother, Paul M. (Inventor); Bryant, Robert G. (Inventor); Jensen, Brian J. (Inventor); Havens, Stephen J. (Inventor)

1997-01-01

Four phenylethynyl amine compounds--3 and 4-aminophenoxy-4'-phenylethynylbenzophenone, and 3 and 4-amino-4'-phenylethynylbenzophenone--were readily prepared and were used to endcap imide oligomers. Phenylethynyl-terminated amide acid oligomers and phenylethynyl-terminated imide oligomers with various molecular weights and compositions were prepared and characterized. These oligomers were cured at 300.degree. C. to 400.degree. C. to provide crosslinked polyimides with excellent solvent resistance, high strength and modulus and good high temperature properties. Adhesive panels, composites, films and moldings from these phenylethynyl terminated imide oligomers gave excellent mechanical performance.

Phenylethynyl terminated imide oligomers

NASA Technical Reports Server (NTRS)

Hergenrother, Paul M. (Inventor); Bryant, Robert G. (Inventor); Jensen, Brian J. (Inventor); Havens, Stephen J. (Inventor)

1994-01-01

Four phenylethynyl amine compounds - 3 and 4-aminophenoxy-4'-phenylethynylbenzophenone, and 3 and 4-amino-4'-phenylethynylbenzophenone - were readily prepared and were used to endcap imide oligomers. Phenylethynyl-terminated amide acid oligomers and phenylethynyl-terminated imide oligomers with various molecular weights and compositions were prepared and characterized. These oligomers were cured at 300 to 400 C to provide crosslinked polyimides with excellent solvent resistance, high strength and modulus, and good high temperature properties. Adhesive panels, composites, films, and moldings from these phenylethynyl terminated imide oligomers gave excellent mechanical performance.

Phenylethynyl terminated imide oligomers

NASA Technical Reports Server (NTRS)

Hergenrother, Paul M. (Inventor); Bryant, Robert G. (Inventor); Jensen, Brian J. (Inventor); Havens, Stephen J. (Inventor)

1995-01-01

Four phenylethynyl amine compounds - 3 and 4-aminophenoxy-4'-phenylethynylbenzophenone, and 3 and 4-amino-4'-phenylethynylbenzophenone - were readily prepared and were used to endcap imide oligomers. Phenylethynyl-terminated amide acid oligomers and phenylethynyl-terminated imide oligomers with various molecular weights and compositions were prepared and characterized. These oligomers were cured at 300 to 400 C to provide crosslinked polyimides with excellent solvent resistance, high strength and modulus, and good high temperature properties. Adhesive panels, composites, films, and moldings from these phenylethynyl terminated imide oligomers gave excellent mechanical performance.

The synthesis of monomers with pendent ethynyl groups for modified high performance thermoplastics

NASA Technical Reports Server (NTRS)

Nwokogu, Godson C.; Antoine, Miquel D.; Ansong, Omari

1994-01-01

Synthetic schemes were developed and optimized for twelve new monomers possessing unique structural features and one aspartimide. Two synthetic pathways were compared for preparation of the triarylethane monomers with pendent ethynyl groups. The results show that one of these pathways can be generally applied. The alternative pathway was applicable to the preparation of only one of the twelve compounds, the problem being secondary reactions of the initially formed desired product.

The Effect of Molecular Weight on the Composite Properties of Cured Phenylethynyl Terminated Imide Oligomers

NASA Technical Reports Server (NTRS)

Smith, J. G., Jr.; Connell, J. W.; Hergenrother, P. M.

1997-01-01

As part of a program to develop high temperature/high performance structural resins for aeronautical applications, imide oligomers containing terminal phenylethynyl groups with calculated number average molecular weights of 1250, 2500 and 5000 g/mol were prepared, characterized, and evaluated as adhesives and composite matrix resins. The goal of this work was to develop resin systems that are processable using conventional processing equipment into void free composites that exhibit high mechanical properties with long term high temperature durability, and are not affected by exposure to common aircraft fluids. The imide oligomers containing terminal phenylethynyl groups were fabricated into titanium adhesive specimens and IM-7 carbon fiber laminates under 0.1 - 1.4 MPa for 1 hr at 350-371 C. The lower molecular weight oligomers exhibited higher cured Tg, better processability, and better retention of mechanical properties at elevated temperature without significantly sacrificing toughness or damage tolerance than the higher molecular weight oligomer. The neat resin, adhesive and composite properties of the cured polymers will be presented.

Synthesis and Properties of Rigid-Rod Benzobisazole Polymers Containing Benzothiazole Pendent Groups

DTIC Science & Technology

1990-11-16

crystalline phase. Poly-p- benzamides containing bulky methyl, nitro or bromo groups affects intermolecular forces to such a large extent that lyotropic...phosphate/m- cresol . Initial attempts in our laboratory involved pendent phenylation via the synthesis of a series of phenylated terphenyl diacids and...range 2.5-9.3 dL/g and exhibited partial solubility (ə%) in m- cresol /strong acid mixtures. Concentrated solutions (>5-) could not be obtained in any

Phenylethynyl Phthalic Anhydride

NASA Technical Reports Server (NTRS)

Hergenrother, Paul M. (Inventor); Smith, Joseph G., Jr. (Inventor)

1997-01-01

Controlled molecular weight PhenylEthynyl Terminated Imide oligomers (PETIs) have been prepared by the cyclodehydration of precursor phenylethynyl terminated amic acid oligomers. Amino terminated amic acid oligomers are prepared from the reaction of dianhydride(s) with an excess of diamine(s) and subsequently endcapped with PhenylEthynyl Phthalic Anhydride(s) (PEPA). The polymerizations are carried out in polar aprotic solvents such as N-methyl-2pyrrolidinone or N N-dimethylacetamide under nitrogen at room temperature. The amic acid oligomers are subsequently cyclodehydrated either thermally or chemically to the corresponding imide oligomers. Direct preparation of PETIs from the reaction of dianhydride(s) with an excess of diamine(s) and endcapped with phenylethynyl phthalic anhydride(s) has been performed in m-cresol. Phenylethynyl phthalic anhydrides are synthesized by the palladium catalyzed reaction of phenylacetylene with bromo substituted phthalic anhydrides in triethylamine. These new materials exhibit excellent properties and are potentially useful as adhesives, coatings, films, moldings and composite matrices.

Imide oligomers endcapped with phenylethynyl phthalic anhydrides and polymers therefrom

NASA Technical Reports Server (NTRS)

Hergenrother, Paul M. (Inventor); Smith, Jr., Joseph G. (Inventor)

1996-01-01

Controlled molecular weight phenylethynyl terminated imide oligomers (PETIs) have been prepared by the cyclodehydration of precursor phenylethynyl terminated amic acid oligomers. Amino terminated amic acid oligomers are prepared from the reaction of dianhydride(s) with an excess of diamine(s) and subsequently endcapped with phenylethynyl phthalic anhydride(s) (PEPA). The polymerizations are carried out in polar aprotic solvents such as N-methyl-2-pyrrolidinone or N,N-dimethylacetamide under nitrogen at room temperature. The amic acid oligomers are subsequently cyclodehydrated either thermally or chemically to the corresponding imide oligomers. Direct preparation of PETIs from the reaction of dianhydride(s) with an excess of diamine(s) and endcapped with phenylethynyl phthalic anhydride(s) has been performed in m-cresol. Phenylethynyl phthalic anhydrides are synthesized by the palladium catalyzed reaction of phenylacetylene with bromo substituted phthalic anhydrides in triethylamine. These new materials exhibit excellent properties and are potentially useful as adhesives, coatings, films, moldings and composite matrices.

Phenylethynyl-butyltellurium inhibits the sulfhydryl enzyme Na+, K+ -ATPase: an effect dependent on the tellurium atom.

PubMed

Quines, Caroline B; Rosa, Suzan G; Neto, José S S; Zeni, Gilson; Nogueira, Cristina W

2013-11-01

Organotellurium compounds are known for their toxicological effects. These effects may be associated with the chemical structure of these compounds and the oxidation state of the tellurium atom. In this context, 2-phenylethynyl-butyltellurium (PEBT) inhibits the activity of the sulfhydryl enzyme, δ-aminolevulinate dehydratase. The present study investigated on the importance of the tellurium atom in the PEBT ability to oxidize mono- and dithiols of low molecular weight and sulfhydryl enzymes in vitro. PEBT, at high micromolar concentrations, oxidized dithiothreitol (DTT) and inhibited cerebral Na(+), K(+)-ATPase activity, but did not alter the lactate dehydrogenase activity. The inhibition of cerebral Na(+), K(+)-ATPase activity was completely restored by DTT. By contrast, 2-phenylethynyl-butyl, a molecule without the tellurium atom, neither oxidized DTT nor altered the Na(+), K(+)-ATPase activity. In conclusion, the tellurium atom of PEBT is crucial for the catalytic oxidation of sulfhydryl groups from thiols of low molecular weight and from Na(+), K(+)-ATPase.

Physico-Chemical Factors Affecting Hydrothermal Resistance and Bonding of Polymeric Composites to Steel Surfaces

DTIC Science & Technology

1985-11-01

and 1.0% PM-odified zinc phosphate hydrate crystals. -117- temperature of decomposition at -1750C, is associated with the dehydration of the...reactions between divalent Ca ions released from CaO-SIO2 grains and carboxylate anions "(COO) yielded during the hydrolysis of functional pendent carboxyl...deterioration of polymers, caused by the hydrolysis of a pendent carbcxyl group, can be restrained by ionic cross-linking initiated by the strongly

Materials for use as proton conducting membranes for fuel cells

DOEpatents

Einsla, Brian R [Blacksburg, VA; McGrath, James E [Blacksburg, VA

2009-01-06

A family of polymers having pendent sulfonate moieties connected to polymeric main chain phenyl groups are described. These polymers are prepared by the steps of polymerization (using a monomer with a phenyl with an alkoxy substitution), deportation by converting the alkoxy to a hydroxyl, and functionalization of the polymer with a pendant sulfonate group. As an example, sulfonated poly(arylene ether sulfone) copolymers with pendent sulfonic acid groups are synthesized by the direct copolymerization of methoxy-containing poly(arylene ether sulfone)s, then converting the methoxy groups to the reactive hydroxyl form, and finally functionalizing the hydroxyl form with proton-conducting sites through nucleophilic substitution. The family of polymers may have application in proton exchange membranes and in other applications.

Imide Oligomers Endcapped with Phenylethynl Phthalic Anhydrides and Polymers Therefrom

NASA Technical Reports Server (NTRS)

Hergenrother, Paul M. (Inventor); Smith, Joseph G., Jr. (Inventor)

1998-01-01

Controlled molecular weight phenylethynyl terminated imide oligomers (PETIs) have been prepared by the cyclodehydration of precursor phenylethynyl terminated amic acid oligomers. Amino terminated amic acid oligomers are prepared from the reaction of dianhydride(s) with an excess of diamine(s) and subsequently endcapped with phenylethynyl phthalic anhydride(s) (PEPA). The polymerizations are carried out in polar aprotic solvents such as N-methyl-2-pyrrolidinone or N.N-dimethylacetamide under nitrogen at room temperature. The amic acid oligomers are subsequently cyclodehydrated either thermally or cheznicauy to the corresponding imide oligomers. Direct preparation of PETIs from the reaction of dianhydxide(s) with an excess of diamine(s) and endcapped with phenylethynyl phthalic anhydride(s) has been performed in m-cresol. Phenylethynyl phthalic anhydrides are synthesized by the palladium catalyzed reaction of phenylacetylene with bromo substituted phthalic anhydrides in triethylamine. These new materials exhibit excellent properties and are potentially useful as adhesives, coatings, films, moldings and composite matrices.

Phenylethynl-terminated poly(arylene ethers)

NASA Technical Reports Server (NTRS)

Jensen, Brian J. (Inventor); Bryant, Robert G. (Inventor); Hergenrother, Paul M. (Inventor)

1993-01-01

Phenylethynyl-terminated poly(arylene ethers) are prepared in a wide range of molecular weights by adjusting monomer ratio and adding an appropriate amount of 4-fluoro- 4'-phenylethynyl benzophenone during polymer synthesis. The resulting phenylethynyl-terminated poly(arylene ethers) react and crosslink upon curing for one hour at 350 C to provide materials with improved solvent resistance, higher modulus, and better high temperature properties than the linear, uncrosslinked polymers.

Safe battery solvents

DOEpatents

Harrup, Mason K.; Delmastro, Joseph R.; Stewart, Frederick F.; Luther, Thomas A.

2007-10-23

An ion transporting solvent maintains very low vapor pressure, contains flame retarding elements, and is nontoxic. The solvent in combination with common battery electrolyte salts can be used to replace the current carbonate electrolyte solution, creating a safer battery. It can also be used in combination with polymer gels or solid polymer electrolytes to produce polymer batteries with enhanced conductivity characteristics. The solvents may comprise a class of cyclic and acyclic low molecular weight phosphazenes compounds, comprising repeating phosphorus and nitrogen units forming a core backbone and ion-carrying pendent groups bound to the phosphorus. In preferred embodiments, the cyclic phosphazene comprises at least 3 phosphorus and nitrogen units, and the pendent groups are polyethers, polythioethers, polyether/polythioethers or any combination thereof, and/or other groups preferably comprising other atoms from Group 6B of the periodic table of elements.

Antimicrobial activity of chemically modified dextran derivatives.

PubMed

Tuchilus, Cristina G; Nichifor, Marieta; Mocanu, Georgeta; Stanciu, Magdalena C

2017-04-01

Cationic amphiphilic dextran derivatives with a long alkyl group attached to the reductive end of the polysaccharide chain and quaternary ammonium groups attached as pendent groups to the main dextran backbone were synthesized and tested for their antimicrobial properties against several bacteria and fungi strains. Dependence of antimicrobial activity on both polymer chemical composition (dextran molar mass, length of end alkyl group and chemical structure of ammonium groups) and type of microbes was highlighted by disc-diffusion method (diameter of inhibition zone) and broth microdilution method (minimum inhibitory concentrations). Polymers had antimicrobial activity for all strains studied, except for Pseudomonas aeruginosa ATCC 27853. The best activity against Staphylococcus aureus (Minimun Inhibitory Concentration 60μg/mL) was provided by polymers obtained from dextran with lower molecular mass (Mn=4500), C 12 H 25 or C 18 H 37 end groups, and N,N-dimethyl-N-benzylammonium pendent groups. Copyright © 2017 Elsevier Ltd. All rights reserved.

Synthesis and Characterization of Modified Phenylethynyl Terminated Polyimides

NASA Technical Reports Server (NTRS)

Chang, Alice C.

1998-01-01

As an ongoing effort to develop structural adhesives for high performance aerospace applications, recent work has focused on phenylethynyl terminated imide (PETI) oligomers. The work reported herein involves the synthesis and characterization of a series of phenylethynyl containing oligomers designated LARC (TM) MPEI (Modified Phenylethynyl Terminated Polyimide). These oligomers contain mixtures of linear, branched and star-shaped molecules. The fully imidized polymers exhibited minimum melt viscosity as low as 600 poise at 335 C. Ti/Ti lap shear specimens processed at 288 C under 15 psi showed tensile shear strength of approx. 6000 psi and 5200 psi at ambient and 350 F temperatures, respectively. The chemistry and properties of these new MPEIs are presented and compared to an optimized linear PETI, LaRC(Tm) -PETI-5.

Phenylethynyl reactive diluents

NASA Technical Reports Server (NTRS)

Bryant, Robert G. (Inventor); Jensen, Brian J. (Inventor); Hergenrother, Paul M. (Inventor)

1995-01-01

A composition of matter having a specified general structure is employed to terminate a nucleophilic reagent, resulting in the exclusive production of phenylethynyl terminated reactive oligomers which display unique thermal characteristics. A reactive diluent having a specified general structure is employed to decrease the melt viscosity of a phenylethynyl terminated reactive oligomer and to subsequently react with to provide a thermosetting material of enhanced density. These materials have features which make them attractive candidates for use as composite matrices and adhesives.

Modified Phenylethynyl Containing Imides for Secondary Bonding: Non-Autoclave, Low Temperature Processable Adhesives

NASA Technical Reports Server (NTRS)

Dezern, James F. (Technical Monitor); Chang, Alice C.

1999-01-01

As part of a program to develop structural adhesives for high performance aerospace applications, research continued on the development of modified phenylethynyl containing imides, LaRC(trademark)MPEIs. In previous reports, the polymer properties were controlled by varying the molecular weight, the amount of branching, and the phenylethynyl content and by blending with low molecular weight materials. This research involves changing the flexibility in the copolyimide backbone of the branched, phenylethynyl terminated adhesives. These adhesives exhibit excellent processability at pressures as low as 15 psi and temperatures as low as 288 C. The Ti/Ti lap shear specimens are processable in an autoclave or a temperature programmable oven under a vacuum bag at 288-300 C without external pressure. The cured polymers exhibit high mechanical properties and excellent solvent resistance. The chemistry and properties of these adhesives are presented.

Reactive Additives for Phenylethynyl-Containing Resins

NASA Technical Reports Server (NTRS)

Connell, John W.; Smith, Joseph G., Jr.; Hergenrother, Paul M.; Rommel, Monica L.

2005-01-01

Phenylethynyl-containing reactive additive (PERA) compounds and mixtures have been found to be useful for improving the processability of oligomers, polymers, co-oligomers, and copolymers that contain phenylethynyl groups. The additives can be incorporated in different forms: A solution of an amide acid or an imide of a PERA can be added to a solution of phenylethynyl-containing oligomer, polymer, co-oligomer, or copolymer; or An imide powder of a PERA can be mixed with a dry powder of a phenylethynyl-containing oligomer, polymer, co-oligomer, or copolymer. The effect of a given PERA on the processability and other properties of the resin system depends on whether the PERA is used in the amide acid or an imide form. With proper formulation, the PERA reduces the melt viscosity of the resin and thereby reduces the processing pressures needed to form the adhesive bonds, consolidate filled or unfilled moldings, or fabricate fiber-reinforced composite laminates. During thermal cure, a PERA reacts with itself as well as with the phenylethynyl-containing host resin and thereby becomes chemically incorporated into the resin system. The effects of the PERA on mechanical properties, relative to those of the host resin, depend on the amount of PERA used. Typically, the incorporation of the PERA results in (1) increases in the glass-transition temperature (Tg), modulus of elasticity, and parameters that characterize behavior under compression, and (2) greater retention of the aforementioned mechanical properties at elevated temperatures without (3) significant reduction of toughness or damage tolerance. Of the formulations tested thus far, the ones found to yield the best overall results were those for which the host resin was the amide acid form of a phenylethynyl-terminated imide (PETI) co-oligomer having a molecular weight of 5,000 g/mole [hence, designated PETI-5] and a PERA denoted as PERA-1. PETI-5 was made from 3,3',4'4'-biphenyltetracarboxylic dianhydride, 3,4'-oxydianiline (3,4'-ODA), 1,3-bis(3-aminophenoxy) benzene (1,3-APB), and 4-phenylethynylphthalic anhydride (PEPA). PERA-1 was made from 3,5-diamino- 4.-phenylethynylbenzophenon and equimolar amounts of phthalic anhydride and PEPA. To make PERA-1 in the imide form, the aforementioned ingredients were processed by refluxing in glacial acetic acid. To make the amide form of PERA-1, the ingredients were reacted in N-methyl-2-pyrrolidinone (NMP) under nitrogen at a temperature of 23 C (see figure). On the basis of the processability and other properties, a blend comprising 20 weight percent of PERA-1 and 80 weight percent PETI-5 was selected for further evaluation. Relative to neat PETI-5, the blend exhibited an increase in Tg; improved processability; and comparable values of shear strength in adhesion to titanium panels, open-hole compressive properties, compression properties after impact, and resistance to microcracking.

Imide/arylene ether copolymers with pendent trifluoromethyl groups

NASA Technical Reports Server (NTRS)

Jensen, Brian J.; Havens, Stephen J.

1992-01-01

A series of imide/arylene ether block copolymers were prepared using an arylene ether block containing a hexafluoroisopropylidene group and an imide block containing a hexafluoroisopropylidene and a trifluoromethyl group in the polymer backbone. The copolymers were characterized and mechanical properties were determined and compared to the homopolymers.

Phenylethynyl terminated reactive oligomer

NASA Technical Reports Server (NTRS)

Bryant, Robert G. (Inventor); Jensen, Brian J. (Inventor); Hergenrother, Paul M. (Inventor)

1995-01-01

A composition of matter having the general structure: ##STR1## (wherein X is F, Cl, or NO.sub.2, and Y is CO, SO.sub.2 or C(CF.sub.3).sub.2) is employed to terminate a nucleophilic reagent, resulting in the exclusive production of phenylethynyl terminated reactive oligomers which display unique thermal characteristics. A reactive diluent having the general structure: ##STR2## (wherein R is any aliphatic or aromatic moiety) is employed to decrease the melt viscosity of a phenylethynyl terminated reactive oligomer and to subsequently react therewith to provide a thermosetting material of enhanced density. These materials have features which make them attractive candidates for use as composite matrices and adhesives.

Synthesis and cure mechanism characterization of phenylethynyl-terminated imide oligomers

NASA Astrophysics Data System (ADS)

Back, Susanna Branion

Polymer matrix composites (PMC) are being investigated by the Air Force for use in engine applications, which are comprised of an intermediate carbon fiber-reinforced high temperature phenylethynyl-terminated fluorinated polyimide resin. The high-temperature phenylethynyl-terminated fluorinated polyimide resin is prepared from 4-(phenylethynyl)phthalic anhydride (4-PEPA), p-phenylenediamine (p-PDA), and hexafluoroisopropylidene bisphthalic dianhydride (6FDA). In order for these materials to be exploited to their full potential, many fundamental aspects of the polymer system need to be better understood. For this study, the high-temperature cure mechanism, the chemical structures of cure reaction products, and the effect of physical properties of impurities in the 4-PEPA monomer were investigated. A phenylethynyl-terminated imide model compound, N-(3-phenoxybenzene)-4-phenylethynylphthalimide (N-PBPEP), was prepared using both industrial 4-PEPA and recrystallized 4-PEPA. The thermal cure of this low molecular weight compound was studied using a variety of analytical techniques including differential scanning calorimetry, Fourier transform infrared spectroscopy (FTIR), nuclear magnetic resonance spectroscopy (NMR), and mass spectrometry (MS). N-PBPEP made from industrial 4-PEPA begins curing 25°C later than N-PBPEP made from recrystallized 4-PEPA, indicating that thermal cure is affected by the purity of the 4-PEPA starting material. Also, both versions form an 830 g/mol dimer with three possible mechanistic pathways.

High Temperature VARTM of Phenylethynyl Terminated Imides

NASA Technical Reports Server (NTRS)

Ghose, Sayata; Watson, Kent A.; Cano, Roberto J.; Britton, Sean M.; Jensen, Brian J.; Connell, John W.; Herring, Helen M.; Linberry, Quentin J.

2009-01-01

LaRC phenylethynyl terminated imide (PETI) resins were processed into composites using high temperature vacuum assisted resin transfer molding (VARTM). Although initial runs yielded composites with high void content, process modifications reduced voids to <3%. Photomicrographs were taken and void contents and T(sub g)s of the panels were determined.

Catalytic Activity of Thiolate-Bridged Diruthenium Complexes Bearing Pendent Ether Moieties in the Oxidation of Molecular Dihydrogen.

PubMed

Yuki, Masahiro; Sakata, Ken; Kikuchi, Shoma; Kawai, Hiroyuki; Takahashi, Tsuyoshi; Ando, Masaki; Nakajima, Kazunari; Nishibayashi, Yoshiaki

2017-01-23

Thiolate-bridged diruthenium complexes bearing pendent ethers have been found to work as effective catalysts toward the oxidation of molecular dihydrogen into protons and electrons in water. The pendent ether moiety in the complex plays an important role to facilitate the proton transfer between the metal center and the external proton acceptor. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

Cure Chemistry of Phenylethynyl Terminated Oligomers

NASA Technical Reports Server (NTRS)

Wood, Karen H.; Orwoll, Robert A.; Young, Philip R.; Jensen, Brian J.; McNair, Harold M.

1997-01-01

The ability to process high performance polymers into quality, void-free composites has been significantly advanced using oligomers terminated with reactive groups which cure or crosslink at elevated temperature without the evolution of volatile byproducts. Several matrix resin systems of considerable interest to the aerospace community utilize phenylethynyl-terminated imide (PETI) technology to achieve this advantage. The present paper addresses the cure chemistry of PETI oligomers. The thermal cure of a low molecular weight model compound was studied using a variety of analytical techniques including differential scanning calorimetry, Fourier transform infrared spectroscopy, and liquid chromatography-mass spectroscopy. The studies indicate an extremely complex cure process. Many stable products were isolated and this paper reports current work on identification of those products. The intent of this research is to provide fundamental insight into the molecular structure of the cured PETI engineering materials so that performance and durability can be more fully assessed.

Low Melt Viscosity Resins for Resin Transfer Molding

NASA Technical Reports Server (NTRS)

Harris, Frank W.

2002-01-01

In recent years, resin transfer molding (RTM) has become one of the methods of choice for high performance composites. Its cost effectiveness and ease of fabrication are major advantages of RTM. RTM process usually requires resins with very low melt viscosity (less than 10 Poise). The optimum RTM resins also need to display high thennal-oxidative stability, high glass transition temperature (T(sub g)), and good toughness. The traditional PMR-type polyimides (e.g. PMR-15) do not fit this requirement, because the viscosities are too high and the nadic endcap cures too fast. High T(sub g), low-melt viscosity resins are highly desirable for aerospace applications and NASA s Reusable Launch Vehicle (RLV) program. The objective of this work is to prepare low-melt viscosity polyimide resins for RTM or resin film infusion (RFI) processes. The approach involves the synthesis of phenylethynyl-terminated imide oligomers. These materials have been designed to minimize their melt viscosity so that they can be readily processed. During the cure, the oligomers undergo both chain extension and crosslinking via the thermal polymerization of the phenylethynyl groups. The Phenylethynyl endcap is preferred over the nadic group due to its high curing temperature, which provides broader processing windows. This work involved the synthesis and polymerization of oligomers containing zig-zag backbones and twisted biphenyl structures. Some A-B type precursors which possessed both nitro and anhydride functionality, or both nitro and amine functionality, were also synthesized in order to obtain the well defined oligomers. The resulting zig-zag structured oligomers were then end-capped with 4-phenylethynylphthalic anhydride (PEPA) for further cure. The properties of these novel imide oligomers are evaluated.

Effect of pendent chains on the interfacial properties of thin polydimethylsiloxane (PDMS) networks.

PubMed

Landherr, Lucas J T; Cohen, Claude; Archer, Lynden A

2011-05-17

The interfacial properties of end-linked polydimethylsiloxane (PDMS) films on silicon are examined. Thin cross-linked PDMS films (∼10 μm thick) were synthesized over a self-assembled monolayer supported on a silicon wafer. By systematically varying the concentration of monofunctional PDMS in a mixture with telechelic precursor molecules, structures ranging from near-ideal elastic networks to poorly cross-linked networks composed of a preponderance of dangling/pendent chains were synthesized. Lateral force microscopy (LFM) employing bead probes was used to quantify the effect of network structure on the interfacial friction coefficient and residual force. Indentation measurements employing an AFM in force mode were used to characterize the elastic modulus and the pull-off force for the films as a function of pendent chain content. These measurements were complemented with conventional mechanical rheometry measurements on similar thick network films to determine their bulk rheological properties. All networks studied manifested interfacial friction coefficients substantially lower than that of bare silicon. PDMS networks with the lowest pendent chain content displayed friction coefficients close to 1 order of magnitude lower than that of bare silicon, whereas networks with the highest pendent chain content manifested friction coefficients about 3 times lower than that of bare silicon. At intermediate sliding velocities, a crossover in the interfacial friction coefficient was observed, wherein cross-linked PDMS films with the least amount of pendent chains exhibit the highest friction coefficient. These observations are discussed in terms of the structure of the films and relaxation dynamics of elastic strands and dangling chains in tethered network films.

High transparent shape memory gel

NASA Astrophysics Data System (ADS)

Gong, Jin; Arai, Masanori; Kabir, M. H.; Makino, Masato; Furukawa, Hidemitsu

2014-03-01

Gels are a new material having three-dimensional network structures of macromolecules. They possess excellent properties as swellability, high permeability and biocompatibility, and have been applied in various fields of daily life, food, medicine, architecture, and chemistry. In this study, we tried to prepare new multi-functional and high-strength gels by using Meso-Decoration (Meso-Deco), one new method of structure design at intermediate mesoscale. High-performance rigid-rod aromatic polymorphic crystals, and the functional groups of thermoreversible Diels-Alder reaction were introduced into soft gels as crosslinkable pendent chains. The functionalization and strengthening of gels can be realized by meso-decorating the gels' structure using high-performance polymorphic crystals and thermoreversible pendent chains. New gels with good mechanical properties, novel optical properties and thermal properties are expected to be developed.

Meso-decorated self-healing gels: network structure and properties

NASA Astrophysics Data System (ADS)

Gong, Jin; Sawamura, Kensuke; Igarashi, Susumu; Furukawa, Hidemitsu

2013-04-01

Gels are a new material having three-dimensional network structures of macromolecules. They possess excellent properties as swellability, high permeability and biocompatibility, and have been applied in various fields of daily life, food, medicine, architecture, and chemistry. In this study, we tried to prepare new multi-functional and high-strength gels by using Meso-Decoration (Meso-Deco), one new method of structure design at intermediate mesoscale. High-performance rigid-rod aromatic polymorphic crystals, and the functional groups of thermoreversible Diels-Alder reaction were introduced into soft gels as crosslinkable pendent chains. The functionalization and strengthening of gels can be realized by meso-decorating the gels' structure using high-performance polymorphic crystals and thermoreversible pendent chains. New gels with good mechanical properties, novel optical properties and thermal properties are expected to be developed.

Highly sensitive and selective dopamine biosensor based on a phenylethynyl ferrocene/graphene nanocomposite modified electrode.

PubMed

Liu, Meiling; Wang, Linping; Deng, Jianhui; Chen, Qiong; Li, Yuzhen; Zhang, Youyu; Li, Haitao; Yao, Shouzhuo

2012-10-07

A new ferrocene derivative (1-[(4-amino) phenylethynyl]ferrocene, Fc-NH(2)) was synthesized for the first time. The ferrocene derivative molecule contained the phenylethynyl skeleton, ferrocene and amino groups with excellent electrochemical properties. The graphene/Fc-NH(2) nanocomposite was prepared by mixing graphene solution and Fc-NH(2) solution in one pot and the nanocomposite was utilized to construct a Nafion/graphene/Fc-NH(2) modified glassy carbon electrode (GCE). The ferrocene derivative immobilized on the graphene can enhance the charge-transport ability of the nanocomposite, stabilize the graphene and prevent the leakage of ferrocene. The detection signal of dopamine (DA) was significantly amplified on the Nafion/graphene/Fc-NH(2)/GCE. It was experimentally demonstrated that the signal enhancement results from the synergy amplification effect of graphene and the Fc-NH(2). The oxidation peak currents of DA were linearly related to the concentrations in the range of 5 × 10(-8) to 2 × 10(-4) M with the detection limit of 20 nM in the absence of uric acid (UA) and ascorbic acid (AA). In the presence of 10(-3) M AA and 10(-4) M UA, the linear response range was 1 × 10(-7) to 4 × 10(-4) M, and the detection limit was 50 nM at S/N = 3. Using the proposed Nafion/Fc-NH(2)/graphene/GCE, DA was successfully determined in real samples with the standard addition method.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ertem, Mehmed Zahid; Suna, Yuki; Himeda, Yuichiro

Pentamethylcyclopentadienyl iridium (Cp*Ir) complexes with bidentate ligands consisting of a pyridine ring and an electron-rich diazole ring were prepared. Their catalytic activity towards CO 2 hydrogenation in 2.0 M KHCO 3 aqueous solutions (pH 8.5) at 50 °C, under 1.0 MPa CO 2/H 2 (1:1) have been reported as an alternative to photo- and electrochemical CO 2 reduction. Bidentate ligands incorporating an electron-rich diazole ring improved the catalytic performance of the Ir complexes compared to the bipyridine ligand. Complexes 2, 4 and 6, possessing both a hydroxy group and an uncoordinated NH group, which are proton-responsive and capable of generatingmore » pendent-bases in basic media, recorded high initial TOF values of 1300 h -1, 1550 h -1 and 2000 h -1, respectively. Here, spectroscopic and computational investigations revealed that the reversible deprotonation changes the electronic properties of the complexes and causes interactions between pendent base and substrate and/or solvent water molecules, resulting in the high catalytic performance in basic media.« less

Phenylethynyl Silsesquioxanes: Monomer Synthesis, Characterization,Thermolysis and Thermal Properties

DTIC Science & Technology

2016-12-14

thermal, mechanical and surface properties of many polymeric systems. A useful analogy is that a POSS is nano-sized particle of silica solubilzed...with organic modifiers (RSiO1.5)n; the organic periphery determines how well the POSS can interact with any host polymer , while the siliceous core adds...various materials affects polymer properties. Herein is reported a synthesis strategy to produce POSS-containing, thermosetting phenylethynyls to yield

Surface Treatment

NASA Technical Reports Server (NTRS)

Park, Cheol (Inventor); Lowther, Sharon E. (Inventor); St.Clair, Terry L. (Inventor)

2003-01-01

A simple surface treatment process is provided which offers a high performance surface for a variety of applications at low cost. This novel surface treatment, which is particularly useful for Ti-6Al-4V alloys, is achieved by forming oxides on the surface with a two-step chemical process and without mechanical abrasion. First, after solvent degreasing, sulfuric acid is used to generate a fresh titanium surface. Next, an alkaline perborate solution is used to form an oxide on the surface. This acid-followed-by-base treatment is cost effective and relatively safe to use in commercial applications. In addition, it is chromium-free, and has been successfully used with a sol-gel coating to afford a strong adhesive bond that exhibits excellent durability after the bonded specimens have been subjected to a harsh 72 hour water boil immersion. Phenylethynyl containing adhesives were used to evaluate this surface treatment with a novel coupling agent containing both trialkoxysilane and phenylethynyl groups. 8 Claims, 16 Drawing Sheets

Iridium Complexes with Proton-Responsive Azole-Type Ligands as Effective Catalysts for CO 2 Hydrogenation

DOE PAGES

Ertem, Mehmed Zahid; Suna, Yuki; Himeda, Yuichiro; ...

2017-10-06

Pentamethylcyclopentadienyl iridium (Cp*Ir) complexes with bidentate ligands consisting of a pyridine ring and an electron-rich diazole ring were prepared. Their catalytic activity towards CO 2 hydrogenation in 2.0 M KHCO 3 aqueous solutions (pH 8.5) at 50 °C, under 1.0 MPa CO 2/H 2 (1:1) have been reported as an alternative to photo- and electrochemical CO 2 reduction. Bidentate ligands incorporating an electron-rich diazole ring improved the catalytic performance of the Ir complexes compared to the bipyridine ligand. Complexes 2, 4 and 6, possessing both a hydroxy group and an uncoordinated NH group, which are proton-responsive and capable of generatingmore » pendent-bases in basic media, recorded high initial TOF values of 1300 h -1, 1550 h -1 and 2000 h -1, respectively. Here, spectroscopic and computational investigations revealed that the reversible deprotonation changes the electronic properties of the complexes and causes interactions between pendent base and substrate and/or solvent water molecules, resulting in the high catalytic performance in basic media.« less

Iridium Complexes with Proton-Responsive Azole-Type Ligands as Effective Catalysts for CO2 Hydrogenation.

PubMed

Suna, Yuki; Himeda, Yuichiro; Fujita, Etsuko; Muckerman, James T; Ertem, Mehmed Z

2017-11-23

Pentamethylcyclopentadienyl iridium (Cp*Ir) complexes with bidentate ligands consisting of a pyridine ring and an electron-rich diazole ring were prepared. Their catalytic activity toward CO 2 hydrogenation in 2.0 m KHCO 3 aqueous solutions (pH 8.5) at 50 °C, under 1.0 MPa CO 2 /H 2 (1:1) have been reported as an alternative to photo- and electrochemical CO 2 reduction. Bidentate ligands incorporating an electron-rich diazole ring improved the catalytic performance of the Ir complexes compared to the bipyridine ligand. Complexes 2, 4, and 6, possessing both a hydroxy group and an uncoordinated NH group, which are proton-responsive and capable of generating pendent bases in basic media, recorded high initial turnover frequency values of 1300, 1550, and 2000 h -1 , respectively. Spectroscopic and computational investigations revealed that the reversible deprotonation changes the electronic properties of the complexes and causes interactions between pendent base and substrate and/or solvent water molecules, resulting in high catalytic performance in basic media. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

Polyimides with pendent ethynyl groups

NASA Technical Reports Server (NTRS)

Jensen, Brian J.; Hergenrother, Paul M.; Nwokogu, Godson

1992-01-01

Several new polyimides containing pendent ethynyl groups were prepared and characterized. The new polyimides were prepared from the following novel ethynyl containing diamines; 1,1-bis(p aminophenyl)-1-(p ethynylphenyl) 2,2,2-trifluoroethane, and 1,1-bis(p aminophenyl)-1-(p phenylethynylphenyl)-2,2,2 trifluoroethane, and 1,1-bis(p aminophenyl)-1-(p hexynylphenyl)-2,2,2 trifluoroethane by reacting with either 3,3',4,4' benzophenone tetracarboxylic dianhydride or 2,2-bis(3,4 dicarboxyphenyl) hexafluoropropane dianhydride (6FDA). Inherent viscosities for the polymers ranged from 0.26 to 0.94 dL/g. Three copolymers prepared by reacting 10 mole pct. of one of the ethynyl containing diamines and 90 mole pct. of 2,2-bis-(4-(4 aminophenoxy)phenyl) hexafluoropropane with 6FDA were also prepared and characterized. Inherent viscosities for these copolymers ranged from 1.08 to 1.54 dL/g. Original polyimide glass transition temperatures were approx. 265 C while curing at 300 to 350 C for 1 hr in air increased the Tgs by approx. 10 C. Film properties and thermal stability were also measured for these copolyimides.

Diastereoselective cyclization of an aminobenzoic acid derivative and chiroptical properties of triple-stranded helical bis(phenylethynyl)benzene.

PubMed

Yamakado, Ryohei; Matsuoka, Shin-ichi; Suzuki, Masato; Takeuchi, Daisuke; Masu, Hyuma; Azumaya, Isao; Takagi, Koji

2015-04-04

The diastereoselective cyclization of 2,5-dibromo-4-hexylaminobenzoic acid was achieved by the microwave-assisted condensation using SiCl4. Moreover, the triple-stranded helical structure of bis(phenylethynyl)benzene units embedded in the cyclic tri(benzamide) scaffold was obtained by a Sonogashira-Hagihara coupling reaction. Two optically active enantiomers that do not racemize even at the elevated temperature were separated by chiral HPLC. The chiral helical topology was revealed by the spectroscopic data and theoretical calculation.

New Polyisoimides: An Approach to In Situ Rigid-Rod Polyimide Formation

DTIC Science & Technology

1987-10-01

substitution, hut because of the highly activated chloro leaving groups ( ortho to a nitro group) it was determined that only a stoichiometric equivalent was...dianhydride (0.5985 g, 2.740 mmol), 24 ml of freshly distilled m- cresol , and six drops of isoquinoline. After the diamine dissolved, 15 ml of toluene were...0 Um cyv W C4 0 LL z 0 20 AFIUAL-TR-87-4071 derivative. Tt was suggested, with good cause, that a pendent group located in the three position ( ortho

Droplet-based magnetically activated cell separation: analysis of separation efficiency based on the variation of flow-induced circulation in a pendent drop.

PubMed

Kim, Youngho; Lee, Sang Ho; Kim, Byungkyu

2009-12-01

Under the assumption that separation efficiencies are mainly affected by the velocity of flow-induced circulation due to buffer injection in a pendent drop, this paper describes an analysis of the separation efficiency of a droplet-based magnetically activated cell separation (DMACS) system. To investigate the velocity of the flow-induced circulation, we supposed that numerous flows in a pendent drop could be considered as a "theoretically normalized" flow (or conceptually normalized flow, CNF) based on the Cauchy-Goursat theorem. With the morphological characteristics (length and duration time) of a pendent drop depending on the initial volume, we obtained the velocities of the CNF. By measuring the separation efficiencies for different initial volumes and by analyzing the separation efficiency in terms of the velocity of the CNF, we found that the separation efficiencies (in the case of a low rate of buffer injection; 5 and 15 microl x min(-1)) are mainly affected by the velocity of the CNF. Moreover, we confirmed that the phenomenological features of a pendent drop cause a fluctuation of its separation efficiencies over a range of specific volumes (initial volumes ranging from 40 to 80 microl), because of the "sweeping-off" phenomenon, that is, positive cells gathered into the positive fraction are forced to move away from the magnetic side by flow-induced circulation due to buffer injection. In addition, from the variation of the duration time, that is, the interval between the beginning of injection of the buffer solution and the time at which a pendent drop detaches, it could also be confirmed that a shorter duration time leads to decrease of the number of positive cells in negative fraction regardless of the rate of buffer injection (5, 15, and 50 microl x min(-1)). Therefore, if a DMACS system is operated with a 15 microl x min(-1) buffer injection flow rate and an initial volume of 80 microl or more, we would have the best efficiency of separation in the negative fraction.

Synthesis of Perfluorinated Polymers

NASA Technical Reports Server (NTRS)

Rosser, R. W.; Psarras, T.

1982-01-01

Long-chain perfluoropolyethers containing functional pendent groups were investigated as possible candidates for new sealants and elastomers that function in extreme environments. Of specific interest was development of materials exhibiting high thermal and oxidative stability at temperatures around 400 degrees C, low-temperature flexibility with glass transition at about 50 degrees C, and hydrolytic stability as well as compatibility with metals and resistance to fuels.

Volatility of the catalytic hydrogenation products of 1,4 bis(phenylethynyl)benzene [The effects of hydrogenation on the volatility of organic hydrogen getters

DOE PAGES

Sharma, Hom N.; Sangalang, Elizabeth A.; Saw, Cheng K.; ...

2017-11-15

Measurements of equilibrium vapor pressures by effusion thermogravimetry and melting points by differential scanning calorimetry reveal that the melting temperature and equilibrium vapor pressures of 1,4-bis(phenylethynyl)benzene (DEB) do not vary monotonically with the hydrogenation extent. Contrary to intuition which suggests increasing volatility with hydrogenation, results indicate decreasing volatility for the first two hydrogenation steps before a non-monotonic upward trend, in which trans-isomers are less volatile. Insights on structural packing and functional groups were obtained from x-ray diffraction and infrared studies to shed light on the observed variation in the volatility of DEB with hydrogenation. Density functional theory calculations were performedmore » to obtain molecular level information and to establish the thermodynamics of DEB hydrogenation reactions. A major factor influencing the observed melting points and volatility of the hydrogenated intermediate species is identified as the local attractive or repulsive carbon-hydrogen (CH) dipole interactions among the getter molecules in their respective crystal structures. As a result, such collective CH dipole interactions can be used to predict the trends in the volatilities of catalytic hydrogenation processes.« less

Volatility of the catalytic hydrogenation products of 1,4 bis(phenylethynyl)benzene [The effects of hydrogenation on the volatility of organic hydrogen getters

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sharma, Hom N.; Sangalang, Elizabeth A.; Saw, Cheng K.

Measurements of equilibrium vapor pressures by effusion thermogravimetry and melting points by differential scanning calorimetry reveal that the melting temperature and equilibrium vapor pressures of 1,4-bis(phenylethynyl)benzene (DEB) do not vary monotonically with the hydrogenation extent. Contrary to intuition which suggests increasing volatility with hydrogenation, results indicate decreasing volatility for the first two hydrogenation steps before a non-monotonic upward trend, in which trans-isomers are less volatile. Insights on structural packing and functional groups were obtained from x-ray diffraction and infrared studies to shed light on the observed variation in the volatility of DEB with hydrogenation. Density functional theory calculations were performedmore » to obtain molecular level information and to establish the thermodynamics of DEB hydrogenation reactions. A major factor influencing the observed melting points and volatility of the hydrogenated intermediate species is identified as the local attractive or repulsive carbon-hydrogen (CH) dipole interactions among the getter molecules in their respective crystal structures. As a result, such collective CH dipole interactions can be used to predict the trends in the volatilities of catalytic hydrogenation processes.« less

Preparation, Fabrication, and Evaluation of Advanced Polymeric and Composite Materials

NASA Technical Reports Server (NTRS)

Orwoll, Robert A.

1997-01-01

The thesis titles are given below: physical and mechanical behavior of amorphous poly(arylene ether-co-imidasole)s and poly(arylene ether-co-imidasole) modification epoxies; the requirements of patentability as applied to the chemical arts; fabrication of thermoplastic polymer composite ribbon; blend of reactive diluents with phenylethynyl-terminated arylene ether oligomers; the synthesis, characterization, and application of ether-containing polyimides; the synthesis of reflective and electrically conductive polyimide films via an in-situ self-metalization procedure using silver (I) complexes; the thermal cure of phenylethynyl terminated polyimides and selected model compounds; and the synthesis, characterization, and molecular modeling of cyclic arylene ether oligomers.

Adhesive Properties of Cured Phenylethynyl containing Imides

NASA Technical Reports Server (NTRS)

Chang, Alice C.

1997-01-01

As part of a program to develop structural adhesives for high performance aerospace applications, several phenylethynyl containing oligomer blends of Larc(TM) MPEI and a reactive plasticizer designated LaRC LV-1 21 were prepared and evaluated. The fully imidized blends exhibited minimum melt viscosity as low as 1000 poise at 371 C. Ti/Ti lap shear specimens fabricated at 316 C under 15 psi gave RT strength of approx. 4300 psi and no change in strength was observed at 177 C. The chemistry and properties of this new MPEI as well as some blends of MPEI with LV-121 are presented and compared to the linear version, LARC(TM)-PETI-5.

Polyimides containing pendent trifluoromethyl groups

NASA Technical Reports Server (NTRS)

Havens, S. J.; Hergenrother, P. M.

1993-01-01

Several new polyimides containing trifluoromethyl groups were prepared from the reaction of various aromatic dianhydrides and two new diamines containing trifluoromethyl groups, 4,4'-bis(3-amino-5-trifluoromethylphenoxy)biphenyl and l,4-bis(3-amino-5-trifluoromethylphenoxy)benzene. The diamines were prepared from the aromatic nucleophilic displacement of the disodium salts of 4,4'-biphenol or hydroquinone with 3,5-dinitrobenzotrifluoride followed by hydrogenation of the resultant dinitro compounds. The thermally cured polyimides exhibited glass transition temperatures between 186 and 262 C. By thermogravimetric analysis, the polyimides exhibited 5 percent weight losses at 484-527 C in nitrogen and 452-506 C in air.

A heat flux modulator from carbon nanotubes.

PubMed

Jiang, Shaohui; Zhang, Guang; Xia, Dan; Liu, Changhong; Fan, Shoushan

2015-08-28

For a heat flux modulator, the most difficult problem is that the main carriers named 'phonons' have little response to external fields. Of the existing studies on heat flux modulators, most were theoretical work and the materials systems for the theoretical calculations were artificial lattices. In this paper, we made a heat modulator with ultrathin buckypaper which was made of multi-layer carbon nanotube sheets overlapped together, and achieved an on/off ratio whose value was 1.41 using an pendent block in experiments without special optimizations. When the temperatures of the two sides were of appropriate values, we could even see a negative heat flux. Intuitively, the heat flux was tuned by the gap between the buckypaper and the pendent gate, and we observed that there was heat transferred to the pendent block. The structure of the modulator is similar to a CNT transistor with a contactless gate, hence this type of micromodulator will be easy to manufacture in the future.

Monte Carlo Simulation of Endlinking Oligomers

NASA Technical Reports Server (NTRS)

Hinkley, Jeffrey A.; Young, Jennifer A.

1998-01-01

This report describes initial efforts to model the endlinking reaction of phenylethynyl-terminated oligomers. Several different molecular weights were simulated using the Bond Fluctuation Monte Carlo technique on a 20 x 20 x 20 unit lattice with periodic boundary conditions. After a monodisperse "melt" was equilibrated, chain ends were linked whenever they came within the allowed bond distance. Ends remained reactive throughout, so that multiple links were permitted. Even under these very liberal crosslinking assumptions, geometrical factors limited the degree of crosslinking. Average crosslink functionalities were 2.3 to 2.6; surprisingly, they did not depend strongly on the chain length. These results agreed well with the degrees of crosslinking inferred from experiment in a cured phenylethynyl-terminated polyimide oligomer.

Processable Polyimides Containing APB and Reactive End Caps

NASA Technical Reports Server (NTRS)

Jensen, Brian J.

2003-01-01

Imide copolymers that contain 1,3- bis(3-aminophenoxy)benzene (APB) and other diamines and dianhydrides and that are terminated with appropriate amounts of reactive end caps have been invented. The reactive end caps investigated thus far include 4-phenylethynyl phthalic anhydride (PEPA), 3- aminophenoxy-4-phenylethynylbenzop henone (3-APEB), maleic anhydride (MA), and 5-norbornene-2,3-dicarboxylic anhydride [also known as nadic anhydride (NA)]. The advantage of these copolyimides terminated with reactive groups, relative to other polyimides terminated with reactive groups, is a combination of (1) higher values of desired mechanical-property parameters and (2) greater ease of processing into useful parts.

New Acetylene-Terminated Quinoxaline Oligomers

DTIC Science & Technology

1982-03-01

3󈧭 Br, 20.97 Found: C, 62.88; *H, 3.50; Br, 20.83. ( 2 ) (4-Phenylethynyl- 3 ’- bromo )diphenyl ether (6.98 g, 0.02 mol) was dissolved in 150 ml of...I 2 . Govt Accession No. 3 . Recipient’s Catalog Number AFWAL-TR-82-4006 4. Title (and Subtitle) 5. Type of Report & Period Coverec NEW ACETYLENE...displacement of the nitro group of p-nitrobenzil by treatment with the sodium 3 -ethynylphenolate. 1O-CO-Ar-CO-CO-1 + 2 NH2 ) -- H2 > SNHQ2f \\NH2 NH2

The exaptive excellence of spandrels as a term and prototype

PubMed Central

Gould, Stephen Jay

1997-01-01

In 1979, Lewontin and I borrowed the architectural term “spandrel” (using the pendentives of San Marco in Venice as an example) to designate the class of forms and spaces that arise as necessary byproducts of another decision in design, and not as adaptations for direct utility in themselves. This proposal has generated a large literature featuring two critiques: (i) the terminological claim that the spandrels of San Marco are not true spandrels at all and (ii) the conceptual claim that they are adaptations and not byproducts. The features of the San Marco pendentives that we explicitly defined as spandrel-properties—their necessary number (four) and shape (roughly triangular)—are inevitable architectural byproducts, whatever the structural attributes of the pendentives themselves. The term spandrel may be extended from its particular architectural use for two-dimensional byproducts to the generality of “spaces left over,” a definition that properly includes the San Marco pendentives. Evolutionary biology needs such an explicit term for features arising as byproducts, rather than adaptations, whatever their subsequent exaptive utility. The concept of biological spandrels—including the examples here given of masculinized genitalia in female hyenas, exaptive use of an umbilicus as a brooding chamber by snails, the shoulder hump of the giant Irish deer, and several key features of human mentality—anchors the critique of overreliance upon adaptive scenarios in evolutionary explanation. Causes of historical origin must always be separated from current utilities; their conflation has seriously hampered the evolutionary analysis of form in the history of life. PMID:11038582

Recognition of thymine in DNA bulges by a Zn(II) macrocyclic complex.

PubMed

del Mundo, Imee Marie A; Fountain, Matthew A; Morrow, Janet R

2011-08-14

A Zn(II) macrocyclic complex with appended quinoline is a bifunctional recognition agent that uses both the Zn(II) center and the pendent aromatic group to bind to thymine in bulges with good selectivity over DNA containing G, C or A bulges. Spectroscopic studies show that the stem containing the bulge stays largely intact in a DNA hairpin with the Zn(II) complex bound to the thymine bulge. This journal is © The Royal Society of Chemistry 2011

Adhesive and Composite Properties of a New Phenylethynyl Terminated Imide

NASA Technical Reports Server (NTRS)

Thompson, C. M.; Connell, J. W.; Hergenrother, P. M.

2002-01-01

A relatively new phenylethynyl terminated imide oligomer (PETI) from the reaction of 2,3,',4'- biphenyltetracarboxylic dianhydride, 4,4'-oxydianiline and endcapped with 4- phenylethynylphthalic anhydride at a calculated number average molecular weight of 5000 g/mole was evaluated as an adhesive and composite matrix. The asymmetric dianhydride imparts a low melt viscosity to the oligomer and a high glass transition temperature to the cured resin. Preliminary adhesive work with titanium (6Al-4V) adherend gave good room temperature (RT) tensile shear strengths and excellent retention of RT strength at 260 C. Preliminary composite work using unsized IM7 carbon fiber provided moderate to high mechanical properties. The chemistry, mechanical, and physical properties of the new PETI in neat resin, adhesive and composite form are presented.

Carbazole-based BODIPYs with ethynyl substituents at the boron center: solid-state excimer fluorescence in the VIS/NIR region.

PubMed

Maeda, Chihiro; Nagahata, Keiji; Ema, Tadashi

2017-09-26

Carbazole-based BODIPYs 1-6 with several different substituents at the boron atom site were synthesized. These dyes fluoresced in the solid state, and 3a with phenylethynyl groups exhibited a red-shifted and broad fluorescence spectrum, which suggested an excimer emission. Its derivatives 3b-n were synthesized, and the relationship between the solid-state emission and crystal packing was investigated. The X-ray crystal structures revealed cofacial dimers that might form excimers. From the structural optimization results, we found that the introduction of mesityl groups hindered intermolecular access and led to reduced interactions between the dimers. In addition, the red-shifted excimer fluorescence suppressed self-absorption, and dyes with ethynyl groups showed solid-state fluorescence in the vis/NIR region.

The use of the 2-aminobenzoic acid tag for oligosaccharide gel electrophoresis.

PubMed

Huang, Z; Prickett, T; Potts, M; Helm, R F

2000-08-18

Gel electrophoresis of fluorophore labeled saccharides provides a rapid and reliable method to screen enzymatic and/or chemical treatments of polysaccharides and glycoconjugates, as well as a sensitive and efficient microscale method to separate and purify oligosaccharides for further analysis. A simple and inexpensive method of derivatization and analysis using 2-aminobenzoic acid (anthranilic acid, AA) is described and applied to the extracellular polysaccharide released by the desiccation tolerant cyanobacterium Nostoc commune DRH-1. The results of these analyses suggest a possible protective functionality of two pendent groups, as well as a potential relationship between these groups and the desiccation tolerance of the organism.

The Coast Artillery Journal. Volume 92, Number 2, March-April 1949

DTIC Science & Technology

1949-04-01

population. There were four in ,the vicinity of Ros- tock with fields of fire over the Baltic, one near Fecamp on the Channel, and one near Antwerp...34’~AGA>~, Brig. Gen., SeNG . f f f Lerter to the Editor \\~7e"have a very active reserve organization here-t~ 656th Composite Group, which is shortly going... Hospitals To Care For Army Dependents Naval actIvities having facilities for medical care of de- pendents have been authorized to provide such care for

High Temperature Transfer Molding Resins Based on 2,3,3',4'-Biphenyltetracarboxylic Dianhydride

NASA Technical Reports Server (NTRS)

Smith, J. G., Jr.; Connell, J. W.; Hergenrother, P. M.; Yokota, R.; Criss, J. M.

2002-01-01

As part of an ongoing effort to develop materials for resin transfer molding (RTM) processes to fabricate high performance/high temperature composite structures, phenylethynyl containing imides have been under investigation. New phenylethynyl containing imide compositions were prepared using 2,3,3',4'-biphenyltetracarboxylic dianhydride (a-BPDA) and evaluated for cured glass transition temperature (Tg), melt flow behavior, and for processability into flat composite panels via RTM. The a-BPDA imparts a unique combination of properties that are desirable for high temperature transfer molding resins. In comparison to its symmetrical counterpart (i.e. 3,3',4,4'-biphenyltetracarboxylic dianhydride), a-BPDA affords oligomers with lower melt viscosities and when cured, higher Tgs. Several candidates exhibited the appropriate combination of properties such as a low and stable melt viscosity required for RTM processes, high cured Tg, and moderate toughness. The chemistry, physical, and composite properties of select resins will be discussed.

High Temperature VARTM of Phenylethynyl Terminated Imides

NASA Technical Reports Server (NTRS)

Cano, Roberto J.; Britton, Sean M.; Jensen, Brian J.; Connell, John W.; Herring, Helen M.; Linberry, Quentin J.; Ghose, Sayata; Watson, Kent A.

2009-01-01

Fabrication of composite structures using vacuum assisted resin transfer molding (VARTM) is generally more affordable than conventional autoclave techniques. Recent efforts have focused on adapting VARTM for the fabrication of high temperature composites. Due to their low melt viscosity and long melt stability, certain phenylethynyl terminated imides (PETI) can be processed into composites using high temperature VARTM (HT-VARTM). However, one of the disadvantages of the current HT-VARTM resin systems has been the high porosity of the resultant composites. For aerospace applications, the desired void fraction of less than 2% has not yet been achieved. In the current study, two PETI resins, LaRC PETI-330 and LaRC PETI-8 have been used to make test specimens using HT-VARTM. The resins were infused into ten layers of IM7-6K carbon fiber 5-harness satin fabric at 260 C or 280 C and cured at 371 C. Initial runs yielded composites with high void content, typically greater than 7% by weight. A thermogravimetric-mass spectroscopic study was conducted to determine the source of volatiles leading to high porosity. It was determined that under the thermal cycle used for laminate fabrication, the phenylethynyl endcap was undergoing degradation leading to volatile evolution. By modifying the thermal cycle used in laminate fabrication, the void content was reduced significantly (typically approximately 3%). Densities of the composites were determined using a density gradient column and the glass transition temperatures of the cured composites were measured by dynamic mechanical analysis. Photomicrographs of the panels were taken and void contents were determined by acid digestion. The results of this work are presented herein.

High Temperature VARTM of Phenylethynyl Terminated Imides

NASA Technical Reports Server (NTRS)

Ghose, Sayata; Cano, Roberto J.; Watson, Kent A.; Britton, Sean M.; Jensen, Brian J.; Connell, John W.; Herring, Helen M.; Linberry, Quentin J.

2009-01-01

Depending on the part type and quantity, fabrication of composite structures using vacuum assisted resin transfer molding (VARTM) can be more affordable than conventional autoclave techniques. Recent efforts have focused on adapting VARTM for the fabrication of high temperature composites. Due to their low melt viscosity and long melt stability, certain phenylethynyl terminated imides (PETI) can be processed into composites using high temperature VARTM (HT-VARTM). However, one of the disadvantages of the current HT-VARTM resin systems has been the high porosity of the resultant composites. For aerospace applications, the desired void fraction of less than 2% has not yet been achieved. In the current study, two PETI resins, LaRC PETI-330 and LaRC PETI-8 have been used to make test specimens using HT-VARTM. The resins were infused into ten layers of IM7-6K carbon fiber 5-harness satin fabric at 260 C or 280 C and cured at temperature up to 371 C. Initial runs yielded composites with high void content, typically greater than 7% by weight. A thermogravimetric-mass spectroscopic study was conducted to determine the source of volatiles leading to high porosity. It was determined that under the thermal cycle used for laminate fabrication, the phenylethynyl endcap was undergoing degradation leading to volatile evolution. This finding was unexpected as high quality composite laminates have been fabricated under higher pressures using these resin systems. The amount of weight loss experienced during the thermal cycle was only about 1% by weight, but this leads to a significant amount of volatiles in a closed system. By modifying the thermal cycle used in laminate fabrication, the void content was significantly reduced (typically 3% or less). The results of this work are presented herein.

Conjugation of bioactive groups to poly(lactic acid) and poly[(lactic acid)-co-(glycolic acid)] films.

PubMed

Prime, Emma L; Cooper-White, Justin J; Qiao, Greg G

2007-12-06

A novel PLA-based polymer containing reactive pendent ketone or hydroxyl groups was synthesized by the copolymerization of L-lactide with epsilon-caprolactone-based monomers. The polymer was activated with NPC, resulting in an amine-reactive polymer which was then cast into thin polymeric films, either alone or as part of a blend with PLGA, before immersion into a solution of the cell adhesion peptide GRGDS in PBS buffer allowed for conjugation of GRGDS to the film surfaces. Subsequent 3T3 fibroblast cell adhesion studies demonstrated an increase in cellular adhesion and spreading over films cast from unmodified PLGA. Hence the new polymer can be used to obtain covalent linkage of amine-containing molecules to polymer surfaces.

Regiochemistry in cobalt-mediated intermolecular Pauson-Khand reactions of unsymmetrical internal heteroaromatic alkynes with norbornene.

PubMed

Moulton, Benjamin E; Whitwood, Adrian C; Duhme-Klair, Anne K; Lynam, Jason M; Fairlamb, Ian J S

2011-07-01

The intermolecular Pauson-Khand (PK) reactions of sterically comparable (2-phenylethynyl)heteroaromatic compounds with norbornene, mediated by Co(2)(CO)(8) to give cyclopentenone products, were examined in this study. A synthetic protocol utilizing focused-microwave dielectric heating proved indispensable in the efficient synthesis of the PK cyclopentenone products. "π-Deficient" heteroaromatic substrates, e.g., 2-pyrones, and some "π-excessive" heteroaromatics such as 2- and 3-thiophene and 2-furan favor the β-position in the newly formed cyclopentenone ring. Other π-excessive heteroaromatics such as 2-pyrrole or 2-indole favor the α-position. A π-excessive 3-indole derivative gave a nearly equal mixture of regioisomers. The position of the nitrogen in pyridyl-containing alkyne substrates also affects the regiochemical outcome of the PK reaction. A 2-pyridyl alkyne, possessing a proximal nitrogen, influences the regioselectivity relative to a 4-pyridyl variant quite dramatically, favoring the β-position in the newly formed cyclopentenone ring. A 2-pyrimidylalkyne exhibits similar behavior to the 2-pyridylalkyne. Compounds that do not participate in PK reactions with norbornene include (2-phenylethynyl)imidazoles and the related benzimidazoles, which promote rapid decomposition of the in situ generated (μ(2)-alkyne)Co(2)(CO)(6) complexes. This stands in contrast with other nitrogen-containing heteroaromatics, e.g., pyrrole-, indole-, and pyrimidine-derived compounds, which effectively undergo PK reactions. Overall, the type of heteroaromatic group dramatically influences PK regioselectivity, which can in part be explained by rationalization of the current reaction mechanism, but not fully.

Magnetic hydrogels from alkyne/cobalt carbonyl-functionalized ABA triblock copolymers

DOE PAGES

Jiang, Bingyin; Hom, Wendy L.; Chen, Xianyin; ...

2016-03-09

A series of alkyne-functionalized poly(4-(phenylethynyl)styrene)- block-poly(ethylene oxide)- block-poly(4-(phenylethynyl)styrene) (PPES-b-PEO-b-PPES) ABA triblock copolymers was synthesized by reversible addition–fragmentation chain transfer (RAFT) polymerization. PES n[Co 2(CO) 6] x-EO 800-PES n[Co 2(CO) 6] x ABA triblock copolymer/cobalt adducts (10–67 wt % PEO) were subsequently prepared by reaction of the alkyne-functionalized PPES block with Co 2(CO) 8 and their phase behavior was studied by TEM. Heating triblock copolymer/cobalt carbonyl adducts at 120 °C led to cross-linking of the PPES/Co domains and the formation of magnetic cobalt nanoparticles within the PPES/Co domains. Magnetic hydrogels could be prepared by swelling the PEO domains of the cross-linkedmore » materials with water. Furthermore, swelling tests, rheological studies and actuation tests demonstrated that the water capacity and modulus of the hydrogels were dependent upon the composition of the block copolymer precursors.« less

Properties of amphoteric polyurethane waterborne dispersions. II. Macromolecular self-assembly behavior.

PubMed

Dong, Anjie; Hou, Guoling; Sun, Duoxian

2003-10-15

Amphoteric polyurethane (APU) samples used in this paper were composed of hydrophobic soft segments and pendent -COOH and -CH(2)N(CH(3))(2) groups on the hard segments, which present the properties of both amphoteric polyelectrolytes and amphiphilic block copolymers. APU macromolecules can self-assemble into micelles in acidic and basic aqueous media by hydrophobic/hydrophilic interaction. The self-assembly behavior of APU in acidic and basic media was studied by transmission electron microscopy and light scattering methods. The spherical and hollow micelles of APU were observed respectively in acidic and basic aqueous media. The results indicate that the size and size distribution of APU self-assembly micelles largely depend on the ratio of -COOH to -CH(2)N(CH(3))(2) groups, density of ionizable groups, concentration of APU, and types of acid and base in the media.

Polyimides Containing Pendent Phosphine Oxide Groups for Space Applications

NASA Technical Reports Server (NTRS)

Thompson, C. M.; Smith, J. G., Jr.; Watson, K. A.; Connell, J. W.

2002-01-01

As part of an ongoing materials development activity to produce high performance polymers that are durable to the space environment, phosphine oxide containing polyimides have been under investigation. A novel dianhydride was prepared from 2,5-dihydroxyphenyldiphenylphosphine oxide in good yield. The dianhydride was reacted with commercially available diamines, and a previously reported diamine was reacted with commercially available dianhydrides to prepare isomeric polyimides. The physical and mechanical properties, particularly thermal and optical properties, of the polymers were determined. One material exhibited a high glass transition temperature, high tensile properties, and low solar absorptivity. The chemistry, physical, and mechanical properties of these resins will be discussed.

152. Historic American Buildings Survey, Donald W. Dickensheets, Photographer. March ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

152. Historic American Buildings Survey, Donald W. Dickensheets, Photographer. March 28, 1940. PENDENTIVE MURAL - CHOIR LOFT - ST. MARK WITH LION. (NORTHEAST ELEVATION) - San Xavier del Bac Mission, Mission Road, Tucson, Pima County, AZ

Fuel cell performance of pendent methylphenyl sulfonated poly(ether ether ketone ketone)s

NASA Astrophysics Data System (ADS)

Zhang, Hanyu; Stanis, Ronald J.; Song, Yang; Hu, Wei; Cornelius, Chris J.; Shi, Qiang; Liu, Baijun; Guiver, Michael D.

2017-11-01

Meta- and para-linked homopolymers bearing 3-methylphenyl (Me) pendent groups were postsulfonated to create sulfonated poly(ether ether ketone ketone) (SPEEKK) backbone isomers, which are referred to as Me-p-SPEEKK and Me-m-SPEEKK. Their thermal and oxidative stability, mechanical properties, dimensional stability, methanol permeability, and proton conductivity are characterized. Me-p-SPEEKK and Me-m-SPEEKK proton conductivities at 100 °C are 116 and 173 mS cm-1, respectively. Their methanol permeabilities are 3.3-3.9 × 10-7 cm2 s-1, and dimensional swelling at 100 °C is 16.4-17.5%. Me-p-SPEEKK and Me-m-SPEEKK were fabricated into membrane electrode assemblies (MEAs), and electrochemical properties were evaluated within a direct methanol fuel cell (DMFC) and proton-exchange membrane fuel cell (PEMFC). When O2 is used as the oxidant at 80 °C and 100% RH, the maximum power density of Me-m-SPEEKK reaches 657 mW cm-2, which is higher than those of Nafion 115 (552 mW cm-2). DMFC performance is 85 mW cm-2 at 80 °C with 2.0 M methanol using Me-p-SPEEKK due to its low MeOH crossover. In general, these electrochemical results are comparable to Nafion. These ionomer properties, combined with a potentially less expensive and scalable polymer manufacturing process, may broaden their potential for many practical applications.

Polyethers with pendent phenylvinyl substituted carbazole rings as polymers for hole transporting layers of OLEDs

NASA Astrophysics Data System (ADS)

Griniene, R.; Liu, L.; Tavgeniene, D.; Sipaviciute, D.; Volyniuk, D.; Grazulevicius, J. V.; Xie, Z.; Zhang, B.; Leduskrasts, K.; Grigalevicius, S.

2016-01-01

Polyethers containing pendent 3-(2-phenylvinyl)carbazole moieties have been synthesized by the multi-step synthetic routes. Full characterization of their structures is presented. The polymers represent materials of high thermal stability with initial thermal degradation temperatures exceeding 370 °C. The glass transition temperatures of the amorphous materials were in the range of 56-658 °C. The electron photoemission spectra of thin layers of the polymers showed ionization potentials of about 5.6 eV. Hole-transporting properties of the polymeric materials were tested in the structures of organic light emitting diodes with Alq3 as the green emitter and electron transporting layer. The device containing hole-transporting layers of poly{9-[6-(3-methyloxetan-3-ylmethoxy)hexyl]-3-(2-phenylvinyl)carbazole} exhibited the best overall performance with a maximum photometric efficiency of about 4.0 cd/A and maximum brightness exceeding 6430 cd/m2.

Interconversion of CO2 and formic acid by bio-inspired Ir complexes with pendent bases.

PubMed

Fujita, Etsuko; Muckerman, James T; Himeda, Yuichiro

2013-01-01

Recent investigations of the interconversion of CO2 and formic acid using Ru, Ir and Fe complexes are summarized in this review. During the past several years, both the reaction rates and catalyst stabilities have been significantly improved. Remarkably, the interconversion (i.e., reversibility) has also been achieved under mild conditions in environmentally benign water solvent by slightly changing the pH of the aqueous solution. Only a few catalysts seem to reflect a bio-inspired design such as the use of proton responsive ligands, ligands with pendent bases or acids for a second-coordination-sphere interaction, electroresponsive ligands, and/or ligands having a hydrogen bonding function with a solvent molecule or an added reagent. The most successful of these is an iridium dinuclear complex catalyst that at least has the first three of these characteristics associated with its bridging ligand. By utilizing an acid/base equilibrium for proton removal, the ligand becomes a strong electron donor, resulting in Ir(I) character with a vacant coordination site at each metal center in slightly basic solution. Complemented by DFT calculations, kinetic studies of the rates of formate production using a related family of Ir complexes with and without such functions on the ligand reveal that the rate-determining step for the CO2 hydrogenation is likely to be H2 addition through heterolytic cleavage involving a "proton relay" through the pendent base. The dehydrogenation of formic acid, owing to the proton responsive ligands changing character under slightly acidic pH conditions, is likely to occur by a mechanism with a different rate-determining step. This article is part of a Special Issue entitled: Metals in Bioenergetics and Biomimetics Systems. Copyright © 2012 Elsevier B.V. All rights reserved.

Coalescence of a Drop inside another Drop

NASA Astrophysics Data System (ADS)

Mugundhan, Vivek; Jian, Zhen; Yang, Fan; Li, Erqiang; Thoroddsen, Sigurdur

2016-11-01

Coalescence dynamics of a pendent drop sitting inside another drop, has been studied experimentally and in numerical simulations. Using an in-house fabricated composite micro-nozzle, a smaller salt-water drop is introduced inside a larger oil drop which is pendent in a tank containing the same liquid as the inner drop. On touching the surface of outer drop, the inner drop coalesces with the surrounding liquid forming a vortex ring, which grows in time to form a mushroom-like structure. The initial dynamics at the first bridge opening up is quantified using Particle Image Velocimetry (PIV), while matching the refractive index of the two liquids. The phenomenon is also numerically simulated using the open-source code Gerris. The problem is fully governed by two non-dimensional parameters: the Ohnesorge number and the diameter ratios of the two drops. The validated numerical model is used to better understand the dynamics of the phenomenon. In some cases a coalescence cascade is observed with liquid draining intermittently and the inner drop reducing in size.

2-Methyl-6-(phenylethynyl) pyridine (MPEP) reverses maze learning and PSD-95 deficits in Fmr1 knock-out mice.

PubMed

Gandhi, Réno M; Kogan, Cary S; Messier, Claude

2014-01-01

Fragile X Syndrome (FXS) is caused by the lack of expression of the fragile X mental retardation protein (FMRP), which results in intellectual disability and other debilitating symptoms including impairment of visual-spatial functioning. FXS is the only single-gene disorder that is highly co-morbid with autism spectrum disorder and can therefore provide insight into its pathophysiology. Lack of FMRP results in altered group I metabotropic glutamate receptor (mGluR) signaling, which is a target for putative treatments. The Hebb-Williams (H-W) mazes are a set of increasingly complex spatial navigation problems that depend on intact hippocampal and thus mGluR-5 functioning. In the present investigation, we examined whether an antagonist of mGluR-5 would reverse previously described behavioral deficits in fragile X mental retardation 1 knock-out (Fmr1 KO) mice. Mice were trained on a subset of the H-W mazes and then treated with either 20 mg/kg of an mGluR-5 antagonist, 2-Methyl-6-(phenylethynyl) pyridine (MPEP; n = 11) or an equivalent dose of saline (n = 11) prior to running test mazes. Latency and errors were dependent variables recorded during the test phase. Immediately after completing each test, marble-burying behavior was assessed, which confirmed that the drug treatment was pharmacologically active during maze learning. Although latency was not statistically different between the groups, MPEP treated Fmr1 KO mice made significantly fewer errors on mazes deemed more difficult suggesting a reversal of the behavioral deficit. MPEP treated mice were also less perseverative and impulsive when navigating mazes. Furthermore, MPEP treatment reversed post-synaptic density-95 (PSD-95) protein deficits in Fmr1 KO treated mice, whereas levels of a control protein (β-tubulin) remained unchanged. These data further validate MPEP as a potentially beneficial treatment for FXS. Our findings also suggest that adapted H-W mazes may be a useful tool to document alterations in behavioral functioning following pharmacological intervention in FXS.

Method to Prepare Processable Polymides with Reactive Endgroups using 1,3-Bis (3-Aminophenoxy) Benzene

NASA Technical Reports Server (NTRS)

Jensen, Brian J. (Inventor)

2000-01-01

Polyimide copolymers were obtained containing 1,3-bis(3-aminophenoxy)benzene (APB) and other diamines and dianhydrides and terminating with the appropriate amount of reactive endcapper. The reactive endcappers studied include but should not be limited to 4-phenylethynyl phthalic anhydride (PEPA ), 3-aminophenoxy- 4'-phenylethynylbenzophenone (3-APEB), maleic anhydride (MA) and nadic anhydride (5-norbomene-2,3-dicarboxylic anhydride, NA). Homopolymers containing only other diamines and dianhydrides which are not processable under conditions described previously can be made processable by incorporating various amounts of APB, depending on the chemical structures of the diamines and dianhydrides used. By simply changing the ratio of APB to the other diamine in the polyimide backbone, a material with a unique combination of solubility, Tg, Tm, melt viscosity, toughness and elevated temperature mechanical properties can be prepared. The copolymers that result from using APB to enhance processability have a unique combination of properties that include low pressure processing (200 psi and below), long term melt stability (several hours at 300 C. for the phenylethynyl terminated polymers), high toughness, improved solvent resistance, improved adhesive properties, and improved composite mechanical properties. These copolyimides are eminently suitable as adhesives, composite matrices, moldings, films and coatings.

Near-IR Two-Photon Fluorescent Sensor for K(+) Imaging in Live Cells.

PubMed

Sui, Binglin; Yue, Xiling; Kim, Bosung; Belfield, Kevin D

2015-08-19

A new two-photon excited fluorescent K(+) sensor is reported. The sensor comprises three moieties, a highly selective K(+) chelator as the K(+) recognition unit, a boron-dipyrromethene (BODIPY) derivative modified with phenylethynyl groups as the fluorophore, and two polyethylene glycol chains to afford water solubility. The sensor displays very high selectivity (>52-fold) in detecting K(+) over other physiological metal cations. Upon binding K(+), the sensor switches from nonfluorescent to highly fluorescent, emitting red to near-IR (NIR) fluorescence. The sensor exhibited a good two-photon absorption cross section, 500 GM at 940 nm. Moreover, it is not sensitive to pH in the physiological pH range. Time-dependent cell imaging studies via both one- and two-photon fluorescence microscopy demonstrate that the sensor is suitable for dynamic K(+) sensing in living cells.

Construction of Experimental Polyvinyl Chloride (PVC) Roofing.

DTIC Science & Technology

1984-04-01

in. War II vintage; squash and handball courts were (13-mm) fiberboard, to comply with Sarnafil re- added in 1966. The entire structure is of wood con...squash and handball courts had a gravel surface. pendently, avoiding difficulties of trying to handle Figure 23 shows the building arrangements. two

New thiol-responsive mono-cleavable block copolymer micelles labeled with single disulfides.

PubMed

Sourkohi, Behnoush Khorsand; Schmidt, Rolf; Oh, Jung Kwon

2011-10-18

Thiol-responsive symmetric triblock copolymers having single disulfide linkages in the middle blocks (called mono-cleavable block copolymers, ss-ABP(2)) were synthesized by atom transfer radical polymerization in the presence of a disulfide-labeled difunctional Br-initiator. These brush-like triblock copolymers consist of a hydrophobic polyacrylate block having pendent oligo(propylene oxide) and a hydrophilic polymethacrylate block having pendent oligo(ethylene oxide). Gel permeation chromatography and (1)H NMR results confirmed the synthesis of well-defined mono-cleavable block copolymers and revealed that polymerizations were well controlled. Because of amphiphilic nature, these copolymers self-assembled to form colloidally stable micelles above critical micellar concentration of 0.032 mg · mL(-1). In response to reductive reactions, disulfides in thiol-responsive micelles were cleaved. Atomic force microscopy and dynamic light scattering analysis suggested that the cleavage of disulfides caused dissociation of micelles to smaller-sized assembled structures in water. Moreover, in a biomedical perspective, the mono-cleavable block copolymer micelles are not cytotoxic and thus biocompatible. Copyright © 2011 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Processing and Properties of Vacuum Assisted Resin Transfer Molded Phenylethynyl Terminated Imide Composites

NASA Technical Reports Server (NTRS)

Cano, Roberto J.; Ghose, Sayata; Watson, Kent A.; Chunchu, Prasad B.; Jensen, Brian J.; Connell, John W.

2012-01-01

Polyimide composites are very attractive for applications that require a high strength to weight ratio and thermal stability. Recent work at NASA Langley Research Center (LaRC) has concentrated on developing new polyimide resin systems that can be processed without the use of an autoclave for advanced aerospace applications. Due to their low melt viscosities and long melt stability, certain phenylethynyl terminated imides (PETI) can be processed into composites using high temperature vacuum assisted resin transfer molding (HT-VARTM). VARTM has shown the potential to reduce the manufacturing cost of composite structures. In the current study, two PETI resins, LARC(Trademark) PETI-330 and LARC(Trademark) PETI-9, were infused into carbon fiber preforms at 260 C and cured at temperatures up to 371 C. Photomicrographs of polished cross sections were taken and void contents, determined by acid digestion, were below 4.5%. Mechanical properties including short block compression (SBC), compression after impact (CAI), and open hole compression (OHC) were determined at room temperature, 177 C, and 288 C. Both PETI-9 and PETI-330 composites demonstrated very good retention of mechanical properties at elevated temperatures. SBC and OHC properties after aging for 1000 hours at temperatures up to 288 C were also determined.

Photoinduced electron transfer (PET) versus excimer formation in supramolecular p/n-heterojunctions of perylene bisimide dyes and implications for organic photovoltaics.

PubMed

Nowak-Król, Agnieszka; Fimmel, Benjamin; Son, Minjung; Kim, Dongho; Würthner, Frank

2015-01-01

Foldamer systems comprised of two perylene bisimide (PBI) dyes attached to the conjugated backbones of 1,2-bis(phenylethynyl)benzene and phenylethynyl-bis(phenylene)indane, respectively, were synthesized and investigated with regard to their solvent-dependent properties. UV/Vis absorption and steady-state fluorescence spectra show that both foldamers exist predominantly in a folded H-aggregated state consisting of π-π-stacked PBIs in THF and in more random conformations with weaker excitonic coupling between the PBIs in chloroform. Time-resolved fluorescence spectroscopy and transient absorption spectroscopy reveal entirely different relaxation pathways for the photoexcited molecules in the given solvents, i.e. photoinduced electron transfer leading to charge separated states for the open conformations (in chloroform) and relaxation into excimer states with red-shifted emission for the stacked conformations (in THF). Supported by redox data from cyclic voltammetry and Rehm-Weller analysis we could relate the processes occurring in these solution-phase model systems to the elementary processes in organic solar cells. Accordingly, only if relaxation pathways such as excimer formation are strictly avoided in molecular semiconductor materials, excitons may diffuse over larger distances to the heterojunction interface and produce photocurrent via the formation of electron/hole pairs by photoinduced electron transfer.

Chitosan microsphere scaffold tethered with RGD-conjugated poly(methacrylic acid) brushes as effective carriers for the endothelial cells.

PubMed

Yang, Zhenyi; Yuan, Shaojun; Liang, Bin; Liu, Yang; Choong, Cleo; Pehkonen, Simo O

2014-09-01

Endothelial cell-matrix interactions play a vital role in promoting vascularization of engineered tissues. The current study reports a facile and controllable method to develop a RGD peptide-functionalized chitosan microsphere scaffolds for rapid cell expansion of human umbilical vein endothelial cells (HUVECs). Functional poly(methacrylic acid) (PMAA) brushes are grafted from the chitosan microsphere surfaces via surface-initiated ATRP. Subsequent conjugation of RGD peptides on the pendent carboxyl groups of PMAA side chain is accomplished by carbodiimide chemistry to facilitate biocompatibility of the 3D CS scaffolding system. In vitro cell-loading assay of HUVECs exhibits a significant improvment of cell adhesion, spreading, and proliferation on the RGD peptide-immobilized CS microsphere surfaces. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Rhenium and technetium tricarbonyl complexes of 1,4-Substituted pyridyl-1,2,3-triazole bidentate 'click' ligands conjugated to a targeting RGD peptide.

PubMed

Connell, Timothy U; Hayne, David J; Ackermann, Uwe; Tochon-Danguy, Henri J; White, Jonathan M; Donnelly, Paul S

2014-04-01

New 1,4-substituted pyridyl-1,2,3-triazole ligands with pendent phenyl isothiocyanate functional groups linked to the heterocycle through a short methylene or longer polyethylene glycol spacers were prepared and conjugated to a peptide containing the arginine-glycine-aspartic acid peptide motif. Rhenium and technetium carbonyl complexes, [M(CO)3 L(x) (py)](+) (where M = Re(I) or (99m) Tc(I) ; L(x)  = 1,4-substituted pyridyl-1,2,3-triazole ligands and py = pyridine) were prepared. One rhenium complex has been characterized by X-ray crystallography, and the luminescent properties of [M(CO)3 L(x) (py)](+) are reported. Copyright © 2013 John Wiley & Sons, Ltd.

Challenges in Laser Sintering of Melt-Processable Thermoset Imide Resin

NASA Technical Reports Server (NTRS)

Chuang, Kathy C.; Gornet, Timothy; Koerner, Hilmar

2016-01-01

Polymer Laser Sintering (LS) is an additive manufacturing technique that builds 3D models layer by layer using a laser to selectively melt cross sections in powdered polymeric materials, following sequential slices of the CAD model. LS generally uses thermoplastic polymeric powders, such as polyamides (i.e. Nylon), and the resultant 3D objects are often weaker in their strength compared to traditionally processed materials, due to the lack of polymer inter-chain connection in the z-direction. The objective of this project is to investigate the possibility of printing a melt-processable RTM370 imide resin powder terminated with reactive phenylethynyl groups by LS, followed by a postcure in order to promote additional crosslinking to achieve higher temperature (250-300 C) capability. A preliminary study to build tensile specimens by LS and the corresponding DSC and rheology study of RTM370 during LS process is presented.

Challenges in Laser Sintering of Thermoset Imide Resin

NASA Technical Reports Server (NTRS)

Chuang, Kathy C.; Gornet, Timothy; Koerner, Hilmar

2016-01-01

Polymer Laser Sintering (LS) is an additive manufacturing technique that builds 3D models layer by layer using a laser to selectively melt cross sections in powdered polymeric materials, following sequential slices of the CAD model. LS generally uses thermoplastic polymeric powders, such as polyamides (i.e. Nylon), and the resultant 3D objects are often weaker in their strength compared to traditionally processed materials, due to the lack of polymer inter-chain connection in the z-direction. The objective of this project is to investigate the possibility of printing a melt-processable RTM370 imide resin powder terminated with reactive phenylethynyl groups by LS, followed by a postcure in order to promote additional crosslinking to achieve higher temperature (250-300 C) capability. A preliminary study to build tensile specimens by LS and the corresponding DSC and rheology study of RTM370 during LS process is presented.

An Experimental Investigation of the Performance of a New Wideband, Directional Receiver/Transmitter Sonar System

DTIC Science & Technology

2009-08-01

caractéristiques directionnelles dépendent beaucoup de la fréquence. Les mesures des courbes de réponse en tension d’émission du projecteur et des diagrammes ...Development Knowledge and Information Management FFT Fast fourier transform HF MMPP High frequency multi-mode pipe projector kHz kilohertz MMPP

Deepening the Topology of the Translocator Protein Binding Site by Novel N,N-Dialkyl-2-arylindol-3-ylglyoxylamides.

PubMed

Barresi, Elisabetta; Bruno, Agostino; Taliani, Sabrina; Cosconati, Sandro; Da Pozzo, Eleonora; Salerno, Silvia; Simorini, Francesca; Daniele, Simona; Giacomelli, Chiara; Marini, Anna Maria; La Motta, Concettina; Marinelli, Luciana; Cosimelli, Barbara; Novellino, Ettore; Greco, Giovanni; Da Settimo, Federico; Martini, Claudia

2015-08-13

As a continuation of our studies on 2-phenylindol-3-ylglyoxylamides as potent and selective translocator protein (TSPO) ligands, two subsets of novel derivatives, featuring hydrophilic group (OH, NH2, COOH) at the para-position of the pendent 2-phenyl ring (8-16) or different 2-aryl moieties, namely, 3-thienyl, p-biphenyl, 2-naphthyl (23-35), were synthesized and biologically evaluated, some of them showing Ki values in the subnanomolar range and the 2-naphthyl group performance being the best. The resulting SARs confirmed the key role played by interactions taking place between ligands and the lipophilic L1 pocket of the TSPO binding site. Docking simulations were performed on the most potent compound of the present series (29) exploiting the recently available 3D structures of TSPO bound to its standard ligand (PK11195). Our theoretical model was fully consistent with SARs of the newly investigated as well of the previously reported 2-phenylindol-3-ylglyoxylamide derivatives.

Highly Emissive Whole Rainbow Fluorophores Consisting of 1,4-Bis(2-phenylethynyl)benzene Core Skeleton: Design, Synthesis, and Light-Emitting Characteristics.

PubMed

Yamaguchi, Yoshihiro; Ochi, Takanori; Matsubara, Yoshio; Yoshida, Zen-ichi

2015-08-13

To create the whole-rainbow-fluorophores (WRF) having the small Δλem (the difference of λem between a given fluorophore and nearest neighboring fluorophore having the same core skeleton) values (<20 nm) in full visible region (λem: 400-650 nm), the high log ε (>4.5), and the high Φf (>0.6), we investigated molecular design, synthesis, and light-emitting characteristics of the π-conjugated molecules (D/A-BPBs) consisting of 1,4-bis(phenylethynyl)benzene (BPB) modified by donor groups (OMe, SMe, NMe2, and NPh2) and an acceptor group (CN). As a result, synthesized 20 D/A-BPBs (1a-5d) were found to be the desired WRF. To get the intense red fluorophore (Φf > 0.7, λem > 610 nm), we synthesized new compounds (5e-5i) and elucidated their photophysical properties in CHCl3 solution. As a result, 5h, in which a 4-cyanophenyl group is introduced to the para-position of two benzene rings in the terminal NPh2 group of 5d, was found to be the desired intense red fluorophore (log ε = 4.56, Φf = 0.76, λem = 611 nm). The intramolecular charge-transfer nature of the S1 state of WRF (1a-5d) was elucidated by the positive linear relationship between optical transition energy (νem) from the S1 state to the S0 state and HOMO(D)-LUMO(A) difference, and the molecular orbitals calculated with the DFT method. It is demonstrated that our concept (Φf = 1/(exp(-Aπ) + 1)) connected with the relationship between Φf and magnitude (Aπ) of π conjugation length in the S1 state can be applied to WRF (1a-5d). It is suggested that the prediction of Φf from a structural model can be achieved by the equation Φf = 1/(exp(-((ν̃a - ν̃f)(1/2) × a(3/2)) + 1), where ν̃a and ν̃f are the wavenumber (cm(-1)) of absorption and fluorescence peaks, respectively, and a is the calculated molecular radius. From the viewpoint of application of WRF to various functional materials, the light-emitting characteristics of 1a-5i in doped polymer films were examined. It was demonstrated that 1a-5i dispersed in two kinds of polymer film (PST and PMMA) emit light at the whole visible region and have the small Δλem values (<20 nm) and the high Φf values (>0.6). Therefore, the present D/A-BPBs can be said to be the desired WRF even in the doped polymer film.

Alteration of Motor Network Function Following Injury

DTIC Science & Technology

2012-10-01

mechanisms from neuromodulator- dependent corre- lations of mRNA and conductance levels. Ion channel conductances are correlated across channel types...de- pendent on intracellular calcium signaling mechanisms that depend on the release of intracellular calcium stores. Because relatively rapid changes...changes in K current mag- nitudes are independently regulated by distinct mechanisms . Compensatory increases in IKCa are calcium- dependent and due, at

An Investigation of Alternate Synthesis for 2,2’ -BIS(Phenylethynyl)-5, 5’ -Diaminobenzidine

DTIC Science & Technology

1985-05-01

essentially complete reaction of starting material to give cleanly the biphenyl tetraacetamide compound VIla. After work-up, the product melting point ...of compound llh in ethanolic potassium hydroxide with and without diethanolamine catalysis iReference 34) gave a product with a high melting point ...After cooling, aqueous work-up gave a precipitate, which after drying, displayed a low melting point (110-130 0 C). The crude compound was purified by

Phenylethynyl Terminated Imide (PETI) Composites Made by High Temperature VARTM

NASA Technical Reports Server (NTRS)

Chose, Sayata; Cano, Roberto J.; Britton, Sean M.; Watson, Kent A.; Jensen, Brian J.; Connell, John W.

2010-01-01

Fabrication of composite structures using vacuum assisted resin transfer molding (VARTM) is generally more affordable than conventional autoclave techniques. Recent efforts have focused on adapting VARTM for the fabrication of high temperature composites. Due to their low melt viscosity and long melt stability, certain phenylethynyl terminated imides (PETI) can be processed into composites using high temperature VARTM (HT-VARTM). However, one of the disadvantages of the current HT-VARTM resin systems has been the high porosity of the resultant composites. For aerospace applications, a void fraction of <2% is desired. In the current study, two PETI resins, LARC. PETI-330 and LARC. PETI-8 have been used to fabricate test specimens using HT-VARTM. The resins were infused into carbon fiber preforms at 260 C and cured between 316 and 371 C. Photomicrographs of the panels were taken and void contents were determined by acid digestion. Modifications to the thermal cycle used in the laminate fabrication have reduced the void content significantly; typically .3% for carbon fiber biaxially woven fabric and less than 2% for carbon fiber uniaxial fabric. Mechanical properties (short beam shear and flexure) of the panels were determined at both room and elevated temperatures. The results of this work are presented herein. This paper is declared a work of the U.S. Government and is not subject to copyright protection in the United States.

PETIs as High-Temperature Resin-Transfer-Molding Materials

NASA Technical Reports Server (NTRS)

Connell, John N.; Smith, Joseph G., Jr.; Hergenrother, Paul M.

2005-01-01

Compositions of, and processes for fabricating, high-temperature composite materials from phenylethynyl-terminated imide (PETI) oligomers by resin-transfer molding (RTM) and resin infusion have been developed. Composites having a combination of excellent mechanical properties and long-term high-temperature stability have been readily fabricated. These materials are particularly useful for the fabrication of high-temperature structures for jet-engine components, structural components on highspeed aircraft, spacecraft, and missiles. Phenylethynyl-terminated amide acid oligomers that are precursors of PETI oligomers are easily made through the reaction of a mixture of aromatic diamines with aromatic dianhydrides at high stoichiometric offsets and 4-phenylethynylphthalic anhydride (PEPA) as an end-capper in a polar solvent such as N-methylpyrrolidinone (NMP). These oligomers are subsequently cyclodehydrated -- for example, by heating the solution in the presence of toluene to remove the water by azeotropic distillation to form low-molecular-weight imide oligomers. More precisely, what is obtained is a mixture of PETI oligomeric species, spanning a range of molecular weights, that exhibits a stable melt viscosity of less than approximately 60 poise (and generally less than 10 poise) at a temperature below 300 deg C. After curing of the oligomers at a temperature of 371 deg C, the resulting polymer can have a glass-transition temperature (Tg) as high as 375 C, the exact value depending on the compositions.

High Temperature VARTM of Phenylethynyl Terminated Imides (PETI) Resins

NASA Technical Reports Server (NTRS)

Ghose, Sayata; Cano, Roberto J.; Britton, Sean M.; Watson, Kent A.; Jensen, Brian J.; Connell, John W.

2010-01-01

Fabrication of composite structures using vacuum assisted resin transfer molding (VARTM) is generally more affordable than conventional autoclave techniques. Recent efforts have focused on adapting VARTM for the fabrication of high temperature composites. Due to their low melt viscosity and long melt stability, certain phenylethynyl terminated imides (PETI) can be processed into composites using high temperature VARTM (HT-VARTM). However, one of the disadvantages of the current HT-VARTM resin systems has been the high porosity of the resultant composites. For aerospace applications a void fraction of less than 2% is desired. In the current study, two PETI resins, LARCTM PETI-330 and LARCTM PETI-8 have been used to fabricate test specimens using HT-VARTM. The resins were infused into carbon fiber preforms at 260 C and cured between 316 C and 371 C. Modifications to the thermal cycle used in the laminate fabrication have reduced the void content significantly (typically < 3%) for carbon fiber biaxially woven fabric. Photomicrographs of the panels were taken and void contents were determined by acid digestion. For carbon fiber uniaxial fabric, void contents of less than 2% have been obtained using both PETI-8 and PETI-330. Mechanical properties of the panels were determined at both room and elevated temperatures. These include short beam shear and flexure tests. The results of this work are presented herein.

Complex formation of beta-cyclodextrin in aqueous media with poly(N,N-dimethylacrylamide)containing pendent perfluorooctanesulfonamido groups. Final Report, September 15, 1998 - September 14, 1999

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dr. Thieo Hogen-Esch

1999-11-01

The effect of time on the viscosity of solutions of 0.50--1.0 weight % polyacrylamide copolymers containing 2-(N-ethylperfluorooctanesulfonamido)ethyl acrylate (FOSA) comonomer units was monitored at constant shear rates varying from 0.60 to 3.0 sec{sup {minus}1}. The viscosities decreased to a plateau over a period of about thirty minutes. The copolymer solutions sheared at much higher shear rates of 24 sec{sup {minus}1} showed pronounced shear thinning but regained most of their original viscosities after standing for 20 minutes. Heating the solutions less than one hour caused an increase in the low shear viscosity whereas longer heating times decreased solution viscosities presumably duemore » to hydrolysis of the acrylate groups. Addition of beta-cyclodextrin to solutions of the hydrophobically modified polyacrylamide resulted in sharply decreased copolymer viscosities at cyclodextrin concentrations on the order of about 10{sup {minus}3} M. The above is consistent with competitive hydrophobic association of the perfluorocarbon groups of the copolymer with the cyclodextrin disrupting the mutual association of the perfluorocarbon groups.« less

Chemistry, Adhesive and Composite Properties of Low Molecular Weight Phenylethynyl Terminated Oligomers

NASA Technical Reports Server (NTRS)

Connell, John W.

2004-01-01

PETI-5 (1250 and 2500 g/mole) were prepared and characterized. Neat resin, adhesive and composite properties were determined and compared with those of PETI-5 (5000 g/mole). Relative to PETI-5 (5000 g/mole), PETI-5 (2500 g/mole) exhibited improved processability and equivalency in the adhesive and composite properties measured thus far. This resin, in both adhesive film and prepreg form, has the potential to offer significant improvements in the processing of complex structural composite parts.

Architectural Survey of Pence Elementary School, Fort Leonard Wood, Missouri

DTIC Science & Technology

2011-09-01

classroom floors , replacement acoustical tile drop ceilings, both original pendent ceiling light fixtures and replacement light fixtures, replacement wood...fixed pane transoms above, original door hardware, acoustical tile drop-ceiling, asbestos tile floor , and a metal radiator cover (photos 38-40...119). The corridors have acoustical tile drop-ceilings, concrete block walls, and asbestos tile floors (photo 44). There are several push-pin cork

Molecular Mechanisms of Metastatic Progression in Breast Cancer

DTIC Science & Technology

2005-07-31

preliminary, this data indicated a possible protective effect of clusterin on the SUM-159PT cells following TNF-alpha treatment. 5 Dr . Flanagan’s...hormone independence and invasion are linked genotypically, or whether they involve inde- pendent genetic or epigenetics processes, remains to be...Foundation for Breast Cancer Research. The authors would like to acknowledge Ken Jones for his excellent technical assistance, and Jeffrey Dawson

JPRS Report, Science & Technology Europe

DTIC Science & Technology

1988-07-27

materials research under microgravity conditions, such as ELLI, AMF of MHF ( Mirror Heating Facility) the Zone Melt- ing Furnace is a resistance-heated...pendently controlled zones. This is another advantage of a resistance-heated furnace over a mirror heating facil- ity. When the experiment requires a...zone, the subdivision into several heating zones will be preferable to the single light focus of a mirror heating facility. In 1987/88, following

The Shock and Vibration Digest, Volume 17, Number 9

DTIC Science & Technology

1985-09-01

Hannover, Fed. Rep. Germany , pendent vehicle- bridge interaction forces Vol. II, pp 379-398, 6 figs, 17 refs (In has been developed in the present The...79 STRUCTURAL SYSTEMS............. 44 Ducts......................... 80 Bridges ........................ 44 Building Components........... 81...Werkzeugmaschinen, Stuttgart T. Shimura, K. Kamijo Univ., Fed. Rep. Germany National Aerospace Lab., Tokyo, Japan Rept. No. BMFT-FB-HA-183-21, 100 pp Rept. No

Image Understanding Research

DTIC Science & Technology

1983-10-19

knowledge -based symbolic reasoning, it nonetheless remains de- pendent on the lower levels of iconic processing for its raw information . Both sorts of...priori knowledge of where any particular line might go, and therefore no information regarding the extent of memory access required for the local...IC FILE COPY ,. c 4/t/7 ISG Report 104 IMAGE UNDERSTANDING RESEARCH Final Technical Report Covering Research Activity During the Period October 1

Oberholzeria (Fabaceae subfam. Faboideae), a New Monotypic Legume Genus from Namibia

PubMed Central

Swanepoel, Wessel; le Roux, M. Marianne; Wojciechowski, Martin F.; van Wyk, Abraham E.

2015-01-01

Oberholzeria etendekaensis, a succulent biennial or short-lived perennial shrublet is described as a new species, and a new monotypic genus. Discovered in 2012, it is a rare species known only from a single locality in the Kaokoveld Centre of Plant Endemism, north-western Namibia. Phylogenetic analyses of molecular sequence data from the plastid matK gene resolves Oberholzeria as the sister group to the Genisteae clade while data from the nuclear rDNA ITS region showed that it is sister to a clade comprising both the Crotalarieae and Genisteae clades. Morphological characters diagnostic of the new genus include: 1) succulent stems with woody remains; 2) pinnately trifoliolate, fleshy leaves; 3) monadelphous stamens in a sheath that is fused above; 4) dimorphic anthers with five long, basifixed anthers alternating with five short, dorsifixed anthers, and 5) pendent, membranous, one-seeded, laterally flattened, slightly inflated but indehiscent fruits. PMID:25816251

Oberholzeria (Fabaceae subfam. Faboideae), a new monotypic legume genus from Namibia.

PubMed

Swanepoel, Wessel; le Roux, M Marianne; Wojciechowski, Martin F; van Wyk, Abraham E

2015-01-01

Oberholzeria etendekaensis, a succulent biennial or short-lived perennial shrublet is described as a new species, and a new monotypic genus. Discovered in 2012, it is a rare species known only from a single locality in the Kaokoveld Centre of Plant Endemism, north-western Namibia. Phylogenetic analyses of molecular sequence data from the plastid matK gene resolves Oberholzeria as the sister group to the Genisteae clade while data from the nuclear rDNA ITS region showed that it is sister to a clade comprising both the Crotalarieae and Genisteae clades. Morphological characters diagnostic of the new genus include: 1) succulent stems with woody remains; 2) pinnately trifoliolate, fleshy leaves; 3) monadelphous stamens in a sheath that is fused above; 4) dimorphic anthers with five long, basifixed anthers alternating with five short, dorsifixed anthers, and 5) pendent, membranous, one-seeded, laterally flattened, slightly inflated but indehiscent fruits.

Postpolymerization Modifications of Alkene-Functional Polycarbonates for the Development of Advanced Materials Biomaterials.

PubMed

Thomas, Anthony W; Dove, Andrew P

2016-12-01

Functional aliphatic polycarbonates have attracted significant attention as materials for use as biomedical polymers in recent years. The incorporation of pendent functionality offers a facile method of modifying materials postpolymerization, thus enabling functionalities not compatible with ring-opening polymerization (ROP) to be introduced into the polymer. In particular, polycarbonates bearing alkene-terminated functional groups have generated considerable interest as a result of their ease of synthesis, and the wide range of materials that can be obtained by performing simple postpolymerization modifications on this functionality, for example, through radical thiol-ene addition, Michael addition, and epoxidation reactions. This review presents an in-depth appraisal of the methods used to modify alkene-functional polycarbonates postpolymerization, and the diversity of practical applications for which these materials and their derivatives have been used. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Processing Robustness for A Phenylethynyl Terminated Polyimide Composite

NASA Technical Reports Server (NTRS)

Hou, Tan-Hung

2004-01-01

The processability of a phenylethynyl terminated imide resin matrix (designated as PETI-5) composite is investigated. Unidirectional prepregs are made by coating an N-methylpyrrolidone solution of the amide acid oligomer (designated as PETAA-5/NMP) onto unsized IM7 fibers. Two batches of prepregs are used: one is made by NASA in-house, and the other is from an industrial source. The composite processing robustness is investigated with respect to the prepreg shelf life, the effect of B-staging conditions, and the optimal processing window. Prepreg rheology and open hole compression (OHC) strengths are found not to be affected by prolonged (i.e., up to 60 days) ambient storage. Rheological measurements indicate that the PETAA-5/NMP processability is only slightly affected over a wide range of B-stage temperatures from 250 deg C to 300 deg C. The OHC strength values are statistically indistinguishable among laminates consolidated using various B-staging conditions. An optimal processing window is established by means of the response surface methodology. IM7/PETAA-5/NMP prepreg is more sensitive to consolidation temperature than to pressure. A good consolidation is achievable at 371 deg C (700 deg F)/100 Psi, which yields an RT OHC strength of 62 Ksi. However, processability declines dramatically at temperatures below 350 deg C (662 deg F), as evidenced by the OHC strength values. The processability of the IM7/LARC(TM) PETI-5 prepreg was found to be robust.

Seamless Integration of Detection and Therapy for Breast Cancer using Targeted Engineered Nanoparticles

DTIC Science & Technology

2007-06-01

and exhibit strong scattering and ab- sorption effects due to the strong plasmon resonance of the metallic-dielectric concentric spherical...neglecting its ab- sorption properties. Thus, the studies will be further separated into two sets, one considering only the scattering properties of the... sorption from the gold nanoshells, the reflectance is more de- pendent on the volume-normalized absorption cross section than the combination of

Crowd Behavior Algorithm Development for COMBAT XXI

DTIC Science & Technology

2017-05-30

This study cost the Department of Defense approximately $176,000 expended by TRAC in Fiscal Years 15-17. Prepared on 30 May 2017 TRAC Project Code...modeling to study impacts of military operations in urban terrain. Impacts of crowds on military operations can include those lethality, mobility...de- pendent on the particular socio-economic, political, and cultural environment of the region being studied in the scenario. Our research has found

Effect of Interface Structure on the Microstructural Evolution of Ceramics

DTIC Science & Technology

2007-11-06

because almost all the material properties are de - pendent upon their internal microstructures. Therefore, the microstructural evolution during the...growing interface de - pends upon the density of kinks on that interface. It fol- lows that the atomically smooth interface, which is char- acterized by...grain, and its de - tailed coarsening process has been treated elsewhere.139 During liquid-phase sintering, the formation of grain boundaries between

Optical Data Processing.

DTIC Science & Technology

1985-10-01

importance of this topic and the growing number of OPR papers in these references signifies the importance of this topic..’-’ In this present review...Research (grant 79-0091), and inde- random numbers is used at each TB. To simulate de- pendent contractors of Unicorn Systems Incorporated tector noise...ACKNOWLEDGMENTS. The support of Unicorn Systems Inc. contractors and various CMU grants from AFOSR and NASA Lewis are gratefully acknowledged as is the technical

Synthesis and Characterization of Fatty Acid/Amino Acid Self-Assemblies

PubMed Central

Gajowy, Joanna; Bolikal, Durgadas; Kohn, Joachim; El Fray, Miroslawa

2014-01-01

In this paper, we discuss the synthesis and self-assembling behavior of new copolymers derived from fatty acid/amino acid components, namely dimers of linoleic acid (DLA) and tyrosine derived diphenols containing alkyl ester pendent chains, designated as “R” (DTR). Specific pendent chains were ethyl (E) and hexyl (H). These poly(aliphatic/aromatic-ester-amide)s were further reacted with poly(ethylene glycol) (PEG) and poly(ethylene glycol methyl ether) of different molecular masses, thus resulting in ABA type (hydrophilic-hydrophobic-hydrophilic) triblock copolymers. We used Fourier transform infrared (FTIR) and nuclear magnetic resonance (NMR) spectroscopies to evaluate the chemical structure of the final materials. The molecular masses were estimated by gel permeation chromatography (GPC) measurements. The self-organization of these new polymeric systems into micellar/nanospheric structures in aqueous environment was evaluated using ultraviolet/visible (UV-VIS) spectroscopy, dynamic light scattering (DLS) and transmission electron microscopy (TEM). The polymers were found to spontaneously self-assemble into nanoparticles with sizes in the range 196–239 nm and critical micelle concentration (CMC) of 0.125–0.250 mg/mL. The results are quite promising and these materials are capable of self-organizing into well-defined micelles/nanospheres encapsulating bioactive molecules, e.g., vitamins or antibacterial peptides for antibacterial coatings on medical devices. PMID:25347356

Highly conductive side chain block copolymer anion exchange membranes.

PubMed

Wang, Lizhu; Hickner, Michael A

2016-06-28

Block copolymers based on poly(styrene) having pendent trimethyl styrenylbutyl ammonium (with four carbon ring-ionic group alkyl linkers) or benzyltrimethyl ammonium groups with a methylene bridge between the ring and ionic group were synthesized by reversible addition-fragmentation radical (RAFT) polymerization as anion exchange membranes (AEMs). The C4 side chain polymer showed a 17% increase in Cl(-) conductivity of 33.7 mS cm(-1) compared to the benzyltrimethyl ammonium sample (28.9 mS cm(-1)) under the same conditions (IEC = 3.20 meq. g(-1), hydration number, λ = ∼7.0, cast from DMF/1-propanol (v/v = 3 : 1), relative humidity = 95%). As confirmed by small angle X-ray scattering (SAXS), the side chain block copolymers with tethered ammonium cations showed well-defined lamellar morphologies and a significant reduction in interdomain spacing compared to benzyltrimethyl ammonium containing block copolymers. The chemical stabilities of the block copolymers were evaluated under severe, accelerated conditions, and degradation was observed by (1)H NMR. The block copolymer with C4 side chain trimethyl styrenylbutyl ammonium motifs displayed slightly improved stability compared to that of a benzyltrimethyl ammonium-based AEM at 80 °C in 1 M NaOD aqueous solution for 30 days.

Triazole inhibitors of Cryptosporidium parvum inosine 5′-monophosphate dehydrogenase

PubMed Central

Maurya, Sushil K.; Gollapalli, Deviprasad R.; Kirubakaran, Sivapriya; Zhang, Minjia; Johnson, Corey R.; Benjamin, Nicole N.; Hedstrom, Lizbeth; Cuny, Gregory D.

2010-01-01

Cryptosporidium parvum is an important human pathogen and potential bioterrorism agent. This protozoan parasite cannot salvage guanine or guanosine and therefore relies on inosine 5′-monophosphate dehydrogenase (IMPDH) for biosynthesis of guanine nucleotides and hence for survival. Since C. parvum IMPDH is highly divergent from the host counterpart, selective inhibitors could potentially be used to treat cryptosporidiosis with minimal effects on its mammalian host. A series of 1,2,3-triazole containing ether CpIMPDH inhibitors are described. A structure-activity relationship study revealed that a small alkyl group on the alpha-position of the ether was required with the (R)-enantiomer significantly more active than the (S)-enantiomer. Electron-withdrawing groups in the 3- and/or 4-positions of the pendent phenyl ring were best and conversion of the quinoline containing inhibitors to quinoline-N-oxides retained inhibitory activity both in the presence and absence of bovine serum albumin. The 1,2,3-triazole CpIMPDH inhibitors provide new tools for elucidating the role of IMPDH in C. parvum and may serve as potential therapeutics for treating cryptosporidiosis. PMID:19624136

Removal of the commercial pesticides Novadim Progress, Bordeaux mixture and Karate Zeon by pullulan derivatives based flocculants.

PubMed

Ghimici, Luminita; Constantin, Marieta

2018-04-14

Cationic pullulan derivatives have been synthesized and evaluated, for the first time, as flocculants for the separation of the commercial pesticides, Novadim Progress (organophosphoric type), Bordeax mixture and Karate Zeon (pyrethroid type) from synthetic wastewater. The investigated polymer samples contained either pendent tertiary amine or quaternary ammonium salts groups. The separation efficiency was followed by UV-Vis spectroscopy, while the information regarding the mechanism involved in the separation of pesticide particles have been obtained by zeta potential. UV-Vis spectroscopy data showed strong pesticide particles/polycation interactions in case of Novadim Progress and Bordeaux mixture (maximum pesticide removal between 90% and 98%). Good separation efficiency (around 80%) of Karate Zeon emulsion was also noticed. The zeta potential measurements indicated that the charge neutralization was the common flocculation mechanism for the removal of these pesticides. In addition, the hydrogen bondings and chelation of copper ions by amide and/or tertiary amino groups of the polycations had a noteworthy contribution to the pesticide removal. Copyright © 2018 Elsevier Ltd. All rights reserved.

Structural basis for bifunctional zinc(II) macrocyclic complex recognition of thymine bulges in DNA.

PubMed

del Mundo, Imee Marie A; Siters, Kevin E; Fountain, Matthew A; Morrow, Janet R

2012-05-07

The zinc(II) complex of 1-(4-quinoylyl)methyl-1,4,7,10-tetraazacyclododecane (cy4q) binds selectively to thymine bulges in DNA and to a uracil bulge in RNA. Binding constants are in the low-micromolar range for thymine bulges in the stems of hairpins, for a thymine bulge in a DNA duplex, and for a uracil bulge in an RNA hairpin. Binding studies of Zn(cy4q) to a series of hairpins containing thymine bulges with different flanking bases showed that the complex had a moderate selectivity for thymine bulges with neighboring purines. The dissociation constants of the most strongly bound Zn(cy4q)-DNA thymine bulge adducts were 100-fold tighter than similar sequences with fully complementary stems or than bulges containing cytosine, guanine, or adenine. In order to probe the role of the pendent group, three additional zinc(II) complexes containing 1,4,7,10-tetraazacyclododecane (cyclen) with aromatic pendent groups were studied for binding to DNA including 1-(2-quinolyl)methyl-1,4,7,10-tetraazacyclododecane (cy2q), 1-(4-biphenyl)methyl-1,4,7,10-tetraazacyclododecane (cybp), and 5-(1,4,7,10-tetraazacyclododecan-1-ylsulfonyl)-N,N-dimethylnaphthalen-1-amine (dsc). The Zn(cybp) complex binds with moderate affinity but little selectivity to DNA hairpins with thymine bulges and to DNA lacking bulges. Similarly, Zn(dsc) binds weakly both to thymine bulges and hairpins with fully complementary stems. The zinc(II) complex of cy2q has the 2-quinolyl moiety bound to the Zn(II) center, as shown by (1)H NMR spectroscopy and pH-potentiometric titrations. As a consequence, only weak (500 μM) binding is observed to DNA with no appreciable selectivity. An NMR structure of a thymine-bulge-containing hairpin shows that the thymine is extrahelical but rotated toward the major groove. NMR data for Zn(cy4q) bound to DNA containing a thymine bulge is consistent with binding of the zinc(II) complex to the thymine N3(-) and stacking of the quinoline on top of the thymine. The thymine-bulge bound zinc(II) complex is pointed into the major groove, and there are interactions with the guanine positioned 5' to the thymine bulge.

Dispersing Zwitterions into Comb Polymers for Nonviral Transfection: Experiments and Molecular Simulation.

PubMed

Ghobadi, Ahmadreza F; Letteri, Rachel; Parelkar, Sangram S; Zhao, Yue; Chan-Seng, Delphine; Emrick, Todd; Jayaraman, Arthi

2016-02-08

Polymer-based gene delivery vehicles benefit from the presence of hydrophilic groups that mitigate the inherent toxicity of polycations and that provide tunable polymer-DNA binding strength and stable complexes (polyplexes). However, hydrophilic groups screen charge, and as such can reduce cell uptake and transfection efficiency. We report the effect of embedding zwitterionic sulfobetaine (SB) groups in cationic comb polymers, using a combination of experiments and molecular simulations. Ring-opening metathesis polymerization (ROMP) produced comb polymers with tetralysine (K4) and SB pendent groups. Dynamic light scattering, zeta potential measurements, and fluorescence-based experiments, together with coarse-grained molecular dynamics simulations, described the effect of SB groups on the size, shape, surface charge, composition, and DNA binding strength of polyplexes formed using these comb polymers. Experiments and simulations showed that increasing SB composition in the comb polymers decreased polymer-DNA binding strength, while simulations indicated that the SB groups distributed throughout the polyplex. This allows polyplexes to maintain a positive surface charge and provide high levels of gene expression in live cells. Notably, comb polymers with nearly 50 mol % SB form polyplexes that exhibit positive surface charge similarly as polyplexes formed from purely cationic comb polymers, indicating the ability to introduce an appreciable amount of SB functionality without screening surface charge. This integrated simulation-experimental study demonstrates the effectiveness of incorporating zwitterions in polyplexes, while guiding the design of new and effective gene delivery vectors.

Spectral luminescent and generation properties of new active media in the blue region of the spectrum

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gruzinskii, V.V.; Degtyarenko, K.M.; Kopylova, T.N.

A series of organic luminophores based on benzene, diphenyl, diphenyl ether, diphenylmethane and diphenylene oxide (4,4'-distyryldiphenyl ether and 3,6-distyryldiphenylene oxide were obtained for the first time) were synthesized by a new method, and new patterns of change in their spectral-luminscent properties, depending on the structure of the molecules, were found. The generation of emission obtained for the new compounds in vapors and in solutions is fairly efficient, especially in the case of 4,4'-di(phenylethynyl)diphenyl.

In Site Analysis of a High Temperature Cure Reaction in Real Time Using Modulated Fiber-Optic FT-Raman Spectroscopy

NASA Technical Reports Server (NTRS)

Cooper, John; Aust, Jeffrey F.; Wise, Kent L.; Jensen, Brian J.

1999-01-01

The vibrational spectrum of a high temperature (330 C) polymerization reaction was successfully monitored in real time using a modulated fiber-optic FT-Raman spectrometer. A phenylethynyl terminated monomer was cured, and spectral evidence for two different reaction products was acquired. The products are a conjugated polyene chain and a cyclized trimer. This is the first report describing the use of FT-Raman spectroscopy to monitor a high temperature (greater than 250 C) reaction in real time.

In Situ Analysis of a High-Temperature Cure Reaction in Real Time Using Modulated Fiber-Optic FT-Raman Spectroscopy

NASA Technical Reports Server (NTRS)

Aust, Jeffrey F.; Cooper, John B.; Wise, Kent L.; Jensen, Brian J.

1999-01-01

The vibrational spectrum of a high-temperature (330 C) polymerization reaction was successfully monitored in real time with the use of a modulated fiber-optic Fourier transform (FT)-Raman spectrometer. A phenylethynyl-terminated monomer was cured, and spectral evidence for two different reaction products was acquired. The products are a conjugated polyene chain and a cyclized trimer. This is the first report describing the use of FT-Raman spectroscopy to monitor a high temperature (greater than 250 C) reaction in real time.

Regulation of IAP (Inhibitor of Apoptosis) Gene Expression by the p53 Tumor Suppressor Protein

DTIC Science & Technology

2005-05-01

adenovirus, gene therapy, polymorphism, 31 16. PRICE CODE 17. SECURITY CLASSIFICATION 18. SECURITY CLASSIFICATION 19. SECURITY CLASSIFICATION 20...averaged results of three inde- pendent experiments, with standard error. Right panel: Level of p53 in infected cells using the antibody Ab-6 (Calbiochem...with highly purified mitochondria as described in (2). The arrow marks oligomerized BAK. The right _ -. panel depicts the purity of BMH CrosIinked Mito

How Near is a Near-Optimal Solution: Confidence Limits for the Global Optimum.

DTIC Science & Technology

1980-05-01

or near-optimal solutions are the only practical solutions available. This paper identifies and compares some procedures which use independent near...approximate or near-optimal solutions are the only practical solutions available. This paper identifies and compares some procedures which use inde- pendent...The objective of this paper is to indicate some relatively new statistical procedures for obtaining an upper confidence limit on G Each of these

Iron piano-stool complexes containing NHC ligands outfitted with pendent arms: synthesis, characterization, and screening for catalytic transfer hydrogenation

Treesearch

Parthapratim Das; Thomas Elder; William W. Brennessel; Stephen C. Chmely

2016-01-01

Catalysis is a fundamental technology that is widely used in the food, petrochemical, pharmaceutical, and agricultural sectors to produce chemical products on an industrial scale. Well-defined molecular organometallic species are a cornerstone of catalytic methodology, and the activity and selectivity of these complexes can be modulated by judicious choice of metal and...

Phenylethynyl Terminated Imide (PETI) Composites Made by High Temperature Vartm

NASA Technical Reports Server (NTRS)

Ghose, Sayata; Watson, Kent A.; Cano, Roberto J.; Britton, Sean M.; Jensen, Brian J.; Connell, John W.; Herring, Helen M.; Lineberry, Quentin J.

2010-01-01

The use of composites as primary structures on aerospace vehicles has increased dramatically over the past decade. As these advanced structures increase in size and complexity, their production costs have grown significantly. A major contributor to these manufacturing costs is the requirement of elevated pressures, during high temperature processing, to create fully consolidated composite parts. Recently, NASA Langley has licensed a series of low viscosity Phenyl Ethynyl Terminated Imide, PETI, oligomers that possess a wide processing window to allow for Resin Transfer Molding, RTM, processing. These resins, PETI-8 and PETI-330, demonstrate void fractions of approx.1% under elevated pressure consolidation. However, when used with a standardized thermal curing cycle in a High Temperature Vacuum Assisted RTM (HT-VARTM) process, they display undesirable void contents in excess of 7%. It was determined previously that under the thermal cycles used for laminate fabrication, the phenylethynyl endcap underwent degradation leading to volatile evolution. Modifications to the processing cycle used in the laminate fabrication have reduced the void content significantly (typically less than 3%) for carbon fiber biaxially woven fabric. For carbon fiber uniaxial fabric, void contents of less than 2% have been obtained using both PETI-8 and PETI-330. The resins were infused into carbon fiber preforms at 260 C and cured between 316 C and 371 C. Photomicrographs of the panels were taken and void contents were determined by acid digestion. Mechanical properties of the panels were determined at both room and elevated temperatures. These include short beam shear and flexure tests. The results of this work are presented herein.

The Role of IQGAP1 in Breast Carcinoma

DTIC Science & Technology

2012-10-01

and"-tubulin expression was measured as described above. Statistical Analysis —All experiments were repeated inde- pendently at least three times...IQGAP1 Binds HER2—In vitro analysis with pure proteins was used to examine a possible interaction between IQGAP1 and HER2. GST alone or GST-HER2 was...incubated with puri- fied IQGAP1, and complexes were isolated with glutathione- Sepharose. Analysis by Western blotting reveals that IQGAP1 bindsHER2

The Republic of Korea: Intercultural Education and the Nevada Air National Guard (Team Spirit 󈨖).

DTIC Science & Technology

1982-07-01

GOVERNMENT STRUCTURE written de-.rep whi, li bans the dissemi- pendents, many of whom had con- nation of false rumors , criticism of tended...medicine. - Hanvak system of treatment -- herbs and acupuncture - Tuberculosis - No. I disease. Also cholera , typhoid and VD. 80% of 119 A population has...ated and the false foisted as truth, especially when reforms because they brought with them American their effect was to fan anti-Americanism and nat

A Case Study of Why Some Postal Rate Commission Decisions Took as Long as They Did.

DTIC Science & Technology

1981-09-08

Congress envi- sioned will most likely not be realized if juris- dictional disputes continue. Under the trial-like procedures for ratemaking and...the system if it desires a more timely and harmonious ratemaking process. ;-_J .. .. . ... . .. .. ~I !QGD, E-96 App’".v- ~SEPTEMBER 8, 1981 Request...Commis- sioners develops, then the whole theory of inde- pendent ratemaking judgments will have failed and the Congress will probably be called upon to

JPRS Report, East Asia, Korea: Kulloja, No. 4, April 1988

DTIC Science & Technology

1989-09-01

revolutionary theory on the higher stage designed to completely realize the inde- pendent stand and attitude of the masses of people, perfecting...means plain sailing. It was a course of struggle that had to overcome trials and barriers every step of the way indeed, such as the bloody war with...under the leadership of the party and the leader barriers and trials beyond description and making innovation. It will not be long before the 40th

Synthesis, characterization, and nonlinear optical (NLO) properties of truxene-cored diphenylamine derivatives

NASA Astrophysics Data System (ADS)

Li, Fusheng; Zhao, Baodong; Chen, Yu; Zhang, Yufei; Wang, Tao; Xue, Song

2017-10-01

Three star-shaped compounds based on a truxene core (FS11, FS12 and FS13) were prepared. The truxene core is incorporating with asymmetric diphenylamines, including one phenyl of diphenylamine substituted by methoxy group and the other phenyl substituted by tolyl, fluorophenyl and phenylethynyl for FS11, FS12 and FS13, respectively. Their one-photon, two-photon absorption, geometric structures, electrochemical behavior and thermal properties were investigated. The absorption maxima of charge transfer band for FS11, FS12 and FS13 are 375 nm, 373 nm and 383 nm, and the corresponding molar extinction coefficients of FS11, FS12 and FS13 is 79,950 M- 1 cm- 1, 67,220 M- 1 cm- 1 and 108,780 M- 1 cm- 1. The ;pull-push; structure promotes charge transfer between asymmetric diphenylamine branches and the truxene core. Their two-photon absorbtion property is measured by two-photon induced fluorescence. The maximum two-photon cross-sections values of FS11, FS12 and FS13 are excited at 750 nm, which are 260 GM, 204GM and 367 GM, respectively.

Continuous structural evolution of calcium carbonate particles: a unifying model of copolymer-mediated crystallization.

PubMed

Kulak, Alex N; Iddon, Peter; Li, Yuting; Armes, Steven P; Cölfen, Helmut; Paris, Oskar; Wilson, Rory M; Meldrum, Fiona C

2007-03-28

Two double-hydrophilic block copolymers, each comprising a nonionic block and an anionic block comprising pendent aromatic sulfonate groups, were used as additives to modify the crystallization of CaCO3. Marked morphological changes in the CaCO3 particles were observed depending on the reaction conditions used. A poly(ethylene oxide)-b-poly(sodium 4-styrenesulfonate) diblock copolymer was particularly versatile in effecting a morphological change in calcite particles, and a continuous structural transition in the product particles from polycrystalline to mesocrystal to single crystal was observed with variation in the calcium concentration. The existence of this structural sequence provides unique insight into the mechanism of polymer-mediated crystallization. We propose that it reflects continuity in the crystallization mechanism itself, spanning the limits from nonoriented aggregation of nanoparticles to classical ion-by-ion growth. The various pathways to polycrystalline, mesocrystal, and single-crystal particles, which had previously been considered to be distinct, therefore all form part of a unifying crystallization framework based on the aggregation of precursor subunits.

Cell internalizable and intracellularly degradable cationic polyurethane micelles as a potential platform for efficient imaging and drug delivery.

PubMed

Ding, Mingming; Zeng, Xin; He, Xueling; Li, Jiehua; Tan, Hong; Fu, Qiang

2014-08-11

A cell internalizable and intracellularly degradable micellar system, assembled from multiblock polyurethanes bearing cell-penetrating gemini quaternary ammonium pendent groups in the side chain and redox-responsive disulfide linkages throughout the backbone, was developed for potential magnetic resonance imaging (MRI) and drug delivery. The nanocarrier is featured as a typical "cleavable core-internalizable shell-protective corona" architecture, which exhibits small size, positive surface charge, high loading capacity, and reduction-triggered destabilization. Furthermore, it can rapidly enter tumor cells and release its cargo in response to an intracellular level of glutathione, resulting in enhanced drug efficacy in vitro. The magnetic micelles loaded with superparamagnetic iron oxide (SPIO) nanoparticles demonstrate excellent MRI contrast enhancement, with T2 relaxivity found to be affected by the morphology of SPIO-clustering inside the micelle core. The multifunctional carrier with good cytocompatibility and nontoxic degradation products can serve as a promising theranostic candidate for efficient intracellular delivery of anticancer drugs and real-time monitoring of therapeutic effect.

7-Chloro-4-[(7-chloro­quinolin-4-yl)sulfan­yl]quinoline dihydrate

PubMed Central

Wardell, James L.; Tiekink, Edward R. T.

2012-01-01

In the title thio­ether dihydrate, C18H10Cl2N2S·2H2O, the S-bound quinolinyl residues are almost orthogonal, forming a dihedral angle of 72.36 (4)°. In the crystal, the four water mol­ecules are connected via an eight-membered {⋯OH}4 synthon with each of the four pendent water H atoms hydrogen bonded to a pyridine N atom to stabilize a three-dimensional architecture. PMID:22589973

A Representational Approach to Knowledge and Multiple Skill Levels for Broad Classes of Computer Generated Forces

DTIC Science & Technology

1997-12-01

that I’ll turn my attention to that computer game we’ve talked so much about... Dave Van Veldhuizen and Scott Brown (soon-to-be Drs. Van Veldhuizen and...Industry Training Systems Conference. 1988. 37. Van Veldhuizen , D. A. and L. J Hutson. "A Design Methodology for Domain Inde- pendent Computer...proposed by Van Veld- huizen and Hutson (37), extends the general architecture to support both a domain- independent approach to implementing CGFs and

Butadiene-Isoprene Block Copolymers and Their Hydrogenated Derivatives.

DTIC Science & Technology

1981-04-01

polyethylene, LDPE. The crystallinity, density and AHf for all of the block copolymers were found to be linearly de - pendent on HB content indicating...etc. It is known for example, that carbanions can exist in "tight", "loose", or even "free" structures as a function of counterion and solvent. (5,6...is then observed for the styrene segment. Thus in these systems , there is an apparent "reversal of reactivity" of styrene and the diene, since for the

U.S. and Soviet Relations with Argentina: Obstacles and Opportunities for the U. S. Army

DTIC Science & Technology

1989-11-01

the tactors that conIstrain tle use of such assistance. The Note was writtcn prior to the Ma I 9S9 Argenti ne presidential elcction, and therefore does...821711 and Development Center for studies and analysis operated by The RAND Corporation . Thw Arroyo Center provides the Army with objective. ind.pendent...Center aork is performed under contract MDA903-86-C-0059. The Arroyo Center is housed in RANDs Arn Research Division. The R:ND Corporation is a private

Tumor Microenvironment Inflammation and Obesity in Advanced Prostate Cancer

DTIC Science & Technology

2015-09-30

predicts metabolic syndrome inde- pendently of individual-level SES [47]. A number of limitations affect the inferences of this study. We were unable to...disparities? Biol Res Nurs 7(1):7–15 45. Clegg L, Reichman M, Miller B, Hankey B, Singh G, Lin Y, Goodman M, Lynch C, Schwartz S, Chen V et al (2009) Impact...incidence of metabolic syndrome : a prospective cohort study. BMC public health 13:681 48. Boardman J (2004) Stress and physical health: the role of

Study to Expand Simulation Cockpit Displays of Advanced Sensors

DTIC Science & Technology

1981-03-01

common source is being used for multiple sensor types). If inde- pendent displays and controls are desired then two independent video sources or sensor...line is inserted in each gap, the result is the familiar 211 in- terlace. If two lines are inserted, the result is 31l interlace, and so on. The total...symbol generators. If these systems are oper- ating at various scan rates and if a common display device, such as a multifunction display (MFD) is to

Attenuation of behavioral effects of cocaine by the Metabotropic Glutamate Receptor 5 Antagonist 2-Methyl-6-(phenylethynyl)-pyridine in squirrel monkeys: comparison with dizocilpine.

PubMed

Lee, Buyean; Platt, Donna M; Rowlett, James K; Adewale, Adepero S; Spealman, Roger D

2005-03-01

Growing evidence suggests a role for metabotropic glutamate receptors (mGluRs) in the behavioral effects of cocaine related to its abuse. The mGluR5 subtype, in particular, has come under scrutiny due to its distribution in brain regions associated with drug addiction. This study investigated interactions between the selective mGluR5 antagonist 2-methyl-6-(phenylethynyl)-pyridine (MPEP) and cocaine in squirrel monkeys whose lever-pressing behavior was 1) maintained under a second-order schedule of cocaine self-administration, 2) extinguished and then reinstated by cocaine priming, and 3) controlled by the discriminative stimulus (DS) effects of cocaine. Additional studies determined the effects of MPEP on unconditioned behaviors, coordination, and muscle resistance. In each experiment, the effects of MPEP were compared with those of the N-methyl-d-aspartate antagonist dizocilpine. MPEP attenuated cocaine self-administration, cocaine-induced reinstatement of drug seeking, and the DS effects of cocaine at doses that did not markedly impair motor function or operant behavior in the context of drug discrimination. Dizocilpine also attenuated cocaine self-administration, but it did not significantly alter cocaine-induced reinstatement of drug seeking, and it enhanced rather than attenuated the DS effects of cocaine. The findings point to a significant contribution of mGluR5 mechanisms in the behavioral effects of cocaine related to its abuse and suggest that MPEP has properties of a functional cocaine antagonist, which are not secondary to antagonism at NMDA receptors. The contrasting interactions of MPEP and dizocilpine with cocaine imply that glutamate acting through different metabotropic and ionotropic receptors may modulate the behavioral effects of cocaine in qualitatively different ways.

The metabotropic glutamate receptor antagonist 2-methyl-6-(phenylethynyl) pyridine decreases striatal VGlut2 expression in association with an attenuation of L-DOPA-induced dyskinesias.

PubMed

Marin, C; Bonastre, M; Aguilar, E; Jiménez, A

2011-10-01

The striatal glutamatergic hyperactivity is considered critical in the development of levodopa-induced dyskinesias (LID) in Parkinson's disease (PD). Pharmacological antagonism of the metabotropic glutamate receptors (mGluRs), in particular, the subtype mGluR5, can inhibit the expression of dyskinesia in both rodent and nonhuman primate models of PD. However, the exact mechanisms underlying the mGluR5 antagonism effects are not completely known. The vesicular glutamate transporters (VGluts) are localized in the synaptic vesicles of the striatal glutamatergic axonal terminals. The effects of mGluR5 antagonism modulating VGlut1 and VGlut2, as selective markers for the corticostriatal and thalamostriatal pathways, respectively, are still unknown. We investigated the effects of the mGluR5 antagonist, 2-methyl-6-(phenylethynyl) pyridine (MPEP) on the striatal expression of VGlut1 and VGlut2 in levodopa-treated hemiparkinsonian rats. Male Sprague-Dawley rats received a unilateral 6-hydroxydopamine (6-OHDA) administration in the nigrostriatal pathway. Rats were treated with: (a) levodopa (12 mg/kg/day with benserazide 15 mg/kg, ip) + vehicle; (b) MPEP (1.5 mg/kg/day, ip) + vehicle; (c) levodopa + MPEP, or (d) saline for 10 days. Levodopa treatment induced dyskinesias and did not modify the striatal expression of either VGlut1 or VGlut2. The administration of MPEP significantly attenuated LID and decreased the levels of VGlut2, but not the VGlut1, in the striatum ipsilateral to the lesion (P < 0.05). Our results suggest that the effects of MPEP on LID might be mediated by a modulating effect on VGlut 2 expression. Copyright © 2011 Wiley-Liss, Inc.

Failure Surface Analysis of Polyimide/Titanium Notched Coating Adhesion Specimens

DOE Office of Scientific and Technical Information (OSTI.GOV)

GIUNTA,RACHEL K.; KANDER,RONALD G.

2000-12-18

Adhesively bonded joints of LaRC{trademark} PETI-5, a phenylethynyl-terminated polyimide, with chromic acid anodized titanium were fabricated and debonded interfacially. The adhesive-substrate failure surfaces were investigated using several surface analysis techniques. From Auger spectroscopy, field emission scanning electron microscopy, and atomic force microscopy studies, polymer appears to be penetrating the pores of the anodized substrate to a depth of approximately 100 nm. From x-ray photoelectron spectroscopy data, the polymer penetrating the pores appears to be in electrical contact with the titanium substrate, leading to differential charging. These analyses confirm that the polymer is becoming mechanically interlocked within the substrate surface.

Military Implications of a Possible World Order Crisis in the 1980s

DTIC Science & Technology

1977-11-01

for "the tardy growth of stable inde- pendent combinations among hired journeymen" in England. They found it "in the prospects of economic...P^^W^WW^: I™T"™ ...»jjiiijiiinwiiiiimnpni —mmumimK 11 ,�ŕ ’ "ll’liH-^B^W^piWI -31- Presldent Ferdinand E. Marcos of the Philippines , who... Philippines (mimeo). 2 Dial Torgerson, "U.N. Economic Talks Close With Most Conference Problems Still Unsolved," The Los Angeles Times, June 1, 1976

Transformer room fire tests

NASA Astrophysics Data System (ADS)

Fustich, C. D.

1980-03-01

A series of transformer room fire tests are reported to demonstate the shock hazard present when automatic sprinklers operate over energized electrical equipment. Fire protection was provided by standard 0.5 inch pendent automatic sprinklers temperature rated at 135 F and installed to give approximately 150 sq ft per head coverage. A 480 v dry transformer was used in the room to provide a three phase, four wire distribution system. It is shown that the induced currents in the test room during the various tests are relatively small and pose no appreciable personnel shock hazard.

Electric-field driven jetting from dielectric liquids

NASA Astrophysics Data System (ADS)

Jayasinghe, S. N.; Edirisinghe, M. J.

2004-11-01

Three dielectric (electrical conductivity ˜10-13Sm-1) Newtonian liquids with viscosity in the range 1-100 mPa s were passed through a needle at a controlled flow rate under the influence of an electric field. At an electric field strength of 1.5kV/mm, the liquid exiting the needle instantaneously transformed from dripping droplets to an elliptically pendent droplet from the apex of which a fine jet evolved. Thus, a jet can be obtained on demand, and in this letter we define this phenomenon and explain a basis for it.

Traumatisme de la main par injection a haute pression

PubMed Central

Mabchoure, K.; Diouri, M.; Bahechar, N.; Chlihi, A.

2016-01-01

Summary Les traumatismes de la main par injection à haute pression sont des accidents relativement rares et souvent mal connus par le praticien. Les lésions qui dépendent du produit injecté et du site d’injection sont pourvoyeuses de séquelles esthétiques et fonctionnelles lourdes. Le traitement repose sur la chirurgie, l’antibiothérapie et la rééducation précoce et spécifique. Nous rapportons notre expérience ainsi qu’une revue de la littérature. PMID:27857654

PTSD and DNA Methylation in Select Immune Function Gene Promoter Regions: A Repeated Measures Case-control Study of U.S. Military Service Members

DTIC Science & Technology

2013-06-24

barrier induced by status epilepticus within the rat piriform cortex in interferon-gamma inde- pendent pathway. Brain Res. 1447, 126–134. doi:10.1016...hippocampus following status epilepticus . Neuroscience 170, 711–721. doi:10.1016/j.neuroscience. 2010.07.048 Sananbenesi, F., and Fischer, A. (2009). The...methylation status of each CpG locus was analyzed individually as a T/C SNP using QCpG software (Qiagen Pyrosequencing). The loci of specific CpGs measured

Learning Data Driven Representations from Large Collections of Multidimensional Patterns with Minimal Supervision

DTIC Science & Technology

2008-08-04

Army Research Office (ARO) grants DAAD 19-02-1-0383 and W911NF-06-1-0076. Stéphane Coulombe , Sharon Core, Amar Mukherjee and David Chester played a...the goodness of the final outcome of the joint alignment is critically de - pendent on the appropriate choice of penalty in the objective function1...C. Dahlke, LB. Davenport, P. Davies, B. de Pablos, A. Delcher, Z. Deng, AD. Mays, I. Dew, SM. Dietz, K. Dodson, LE. Doup, M. Downes, S. Dugan-Rocha

Inertially Stabilized Platforms for SATCOM On-The-Move Applications: A Hybrid Open/Closed-Loop Antenna Pointing Strategy

DTIC Science & Technology

2008-06-01

Photo courtesy of www.mathworks.com. Next, Equation (3.16) translates the aircraft disturbance rates through the de - sired local azimuth and elevation...Hessian matrix of the assumed quadratic cost function [34–36]. Equation (4.11) exactly de - termines the minimum of a quadratic function in a single...according to: Bkpk = −gk (4.21) Bk+1 = Bk +Qk (4.22) where Bk in some way approximates Gk from (4.12), and Qk is an update matrix de - pendent upon xk

Assessing the influence of side-chain and main-chain aromatic benzyltrimethyl ammonium on anion exchange membranes.

PubMed

Li, Xiuhua; Nie, Guanghui; Tao, Jinxiong; Wu, Wenjun; Wang, Liuchan; Liao, Shijun

2014-05-28

3,3'-Di(4″-methyl-phenyl)-4,4'-difluorodiphenyl sulfone (DMPDFPS), a new monomer with two pendent benzyl groups, was easily prepared by Suzuki coupling reaction in high yield. A series of side-chain type ionomers (PAES-Qs) containing pendant side-chain benzyltrimethylammonium groups, which linked to the backbone by alkaline resisting conjugated C-C bonds, were synthesized via polycondensation, bromination, followed by quaternization and alkalization. To assess the influence of side-chain and main-chain aromatic benzyltrimethylammonium on anion exchange membranes (AEMs), the main-chain type ionomers (MPAES-Qs) with the same backbone were synthesized following the similar procedure. GPC and (1)H NMR results indicate that the bromination shows no reaction selectivity of polymer configurations and ionizations of the side-chain type polymers display higher conversions than that of the main-chain type ones do. These two kinds of AEMs were evaluated in terms of ion exchange capacity (IEC), water uptake, swelling ratio, λ, volumetric ion exchange capacity (IECVwet), hydroxide conductivity, mechanical and thermal properties, and chemical stability, respectively. The side-chain type structure endows AEMs with lower water uptake, swelling ratio and λ, higher IECVwet, much higher hydroxide conductivity, more robust dimensional stability, mechanical and thermal properties, and higher stability in hot alkaline solution. The side-chain type cationic groups containing molecular configurations have the distinction of being practical AEMs and membrane electrode assemblies of AEMFCs.

2-((Benzimidazol-2-yl)thio)-1-arylethan-1-ones: Synthesis, crystal study and cancer stem cells CD133 targeting potential.

PubMed

Abdel-Aziz, Hatem A; Ghabbour, Hazem A; Eldehna, Wagdy M; Al-Rashood, Sara T A; Al-Rashood, Khalid A; Fun, Hoong-Kun; Al-Tahhan, Mays; Al-Dhfyan, Abdullah

2015-11-02

In order to develop a potent anti-tumor agent that can target both cancer stem cells and the bulk of tumor cells, a series of 2-((benzimidazol-2-yl)thio)-1-arylethan-1-ones 5a-o was synthesized. All compounds were evaluated for their anti-proliferative activity towards colon HT-29 cancer cell line. In addition, their inhibitory effect against cell surface expression of CD133, a potent cancer stem cells (CSCs) marker, in the same cells was evaluated by flow cytometry at 10 μM. Compound 5l emerged as the most active anti-proliferative analog against HT-29 (IC50 = 18.83 ± 1.37 μM), that almost equipotent as 5-fluorouracil (IC50 = 15.83 ± 1.63 μM) with 50.11 ± 4.05% inhibition effect on CD133 expression, suggested dual targeted effect. Also, compounds 5h, 5j, 5k and 5m-o inhibited the expression of CD133 with more than 50%. The SAR study pointed out the significance of substitution of the pendent phenyl group with lipophilic electron-donating groups or replacing it by 2-thienyl or 2-furyl groups. Copyright © 2015 Elsevier Masson SAS. All rights reserved.

Brushed block copolymer micelles with pH-sensitive pendant groups for controlled drug delivery.

PubMed

Lee, Hyun Jin; Bae, Younsoo

2013-08-01

To investigate the effects of small aliphatic pendent groups conjugated through an acid-sensitive linker to the core of brushed block copolymer micelles on particle properties. The brushed block copolymers were synthesized by conjugating five types of 2-alkanone (2-butanone, 2-hexanone, 2-octanone, 2-decanone, and 2-dodecanone) through an acid-labile hydrazone linker to poly(ethylene glycol)-poly(aspartate hydrazide) block copolymers. Only block copolymers with 2-hexanone and 2-octanone (PEG-HEX and PEG-OCT) formed micelles with a clinically relevant size (< 50 nm in diameter), low critical micelle concentration (CMC, < 20 μM), and drug entrapment yields (approximately 5 wt.%). Both micelles degraded in aqueous solutions in a pH-dependent manner, while the degradation was accelerated in an acidic condition (pH 5.0) in comparison to pH 7.4. Despite these similar properties, PEG-OCT micelles controlled the entrapment and pH-dependent release of a hydrophobic drug most efficiently, without altering particle size, shape, and stability. The molecular weight of PEG (12 kDa vs 5 kDa) induced no change in pH-controlled drug release rates of PEG-OCT micelles. Acid-labile small aliphatic pendant groups are useful to control the entrapment and release of a hydrophobic drug physically entrapped in the core of brushed block copolymer micelles.

CO 2 hydrogenation catalyzed by iridium complexes with a proton-responsive ligand

DOE PAGES

Onishi, Naoya; Xu, Shaoan; Manaka, Yuichi; ...

2015-02-18

In this study, the catalytic cycle for the production of formic acid by CO₂ hydrogenation and the reverse reaction has received renewed attention because they are viewed as offering a viable scheme for hydrogen storage and release. In this Forum Article, CO₂ hydrogenation catalyzed by iridium complexes bearing N^N-bidentate ligands is reported. We describe how a ligand containing hydroxyl groups as proton-responsive substituents enhances catalytic performance by an electronic effect of the oxyanions and a pendent-base effect through secondary coordination sphere interaction. In particular, [(Cp*IrCl)₂(TH2BPM)]Cl₂ (Cp* = pentamethyl cyclopentadienyl, TH2BPM = 4,4',6,6'-tetrahydroxy-2,2'-bipyrimidine) promotes enormously the catalytic hydrogenation of CO₂ bymore » these synergistic effects under atmospheric pressure and at room temperature. Additionally, newly designed complexes with azole-type ligands are applied to CO₂ hydrogenation. The catalytic efficiencies of the azole-type complexes are much higher than that of the unsubstituted bipyridine complex [Cp*Ir(bpy)(OH₂)]SO₄. Furthermore, the introduction of one or more hydroxyl groups into ligands such as 2-pyrazolyl-6-hydroxypyridine, 2-pyrazolyl-4,6-dihydroxyl pyrimidine, and 4-pyrazolyl-2,6-dihydroxyl pyrimidine enhanced catalytic activity. It is clear that the incorporation of electron-donating hydroxyl groups into proton-responsive ligands is effective for promoting the hydrogenation of CO₂.« less

Two-photon fluorescent sensor for K+ imaging in live cells (Conference Presentation)

NASA Astrophysics Data System (ADS)

Sui, Binglin; Yue, Xiling; Kim, Bosung; Belfield, Kevin D.

2016-03-01

It is difficult to overstate the physiological importance of potassium for life as its indispensable roles in a variety of biological processes are widely known. As a result, efficient methods for determining physiological levels of potassium are of paramount importance. Despite this, relatively few K+ fluorescence sensors have been reported, with only one being commercially available. A new two-photon excited fluorescent K+ sensor is reported. The sensor is comprised of three moieties, a highly selective K+ chelator as the K+ recognition unit, a boron-dipyrromethene (BODIPY) derivative modified with phenylethynyl groups as the fluorophore, and two polyethylene glycol chains to afford water solubility. The sensor displays very high selectivity (<52-fold) in detecting K+ over other physiological metal cations. Upon binding K+, the sensor switches from non-fluorescent to highly fluorescent, emitting red to near-IR (NIR) fluorescence. The sensor exhibited a good two-photon absorption cross section, 500 GM at 940 nm. Moreover, it is not sensitive to pH in the physiological pH range. Time-dependent cell imaging studies via both one- and two-photon fluorescence microscopy demonstrate that the sensor is suitable for dynamic K+ sensing in living cells.

Solubilities of selected organic electronic materials in pressurized hot water and estimations of aqueous solubilities at 298.15 K.

PubMed

Karásek, Pavel; Hohnová, Barbora; Planeta, Josef; Št'avíková, Lenka; Roth, Michal

2013-02-01

Increasing production and disposal of organic light-emitting diode (OLED) displays for smartphones and tablets may have impact on the environment depending on the aqueous solubility of the pertinent chemicals. Here, aqueous solubilities are presented for several compounds, mostly aromatic amines, used as hole transport materials in the OLED displays. Solute selection includes 1,4-bis(diphenylamino)benzene, tetra-N-phenylbenzidine, 4,4'-bis(N-carbazolyl)-1,1'-biphenyl, 1,3,5-tris(diphenylamino)benzene, and 9,10-bis(phenylethynyl)anthracene. The solubilities are those in pressurized hot water (PHW), i.e., measured at elevated temperature (up to 260 °C) and pressure. The semi-quantitative estimates of room-temperature solubilities of the solutes have been obtained from extrapolations of the solubilities in PHW. For the compounds studied, the estimated aqueous solubilities at room temperature do not exceed 2×10(-11) g of the solute per 1 kg of water. Aqueous solubilities of triphenylamine have also been measured and used to upgrade a recent group-contribution model of aqueous solubilities of organic nonelectrolytes with the parameters for the nitrogen atom in aromatic amines. Copyright © 2012 Elsevier Ltd. All rights reserved.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Xu, Shaoan; Onishi, Naoya; Tsurusaki, Akihiro

Here, we report newly developed iridium catalysts with electron-donating imidazoline moieties as ligands for the hydrogenation of CO 2 to formate in aqueous solution. Interestingly, these new complexes promote CO 2 hydrogenation much more effectively than their imidazole analogues and exhibit a turnover frequency (TOF) of 1290 h –1 for the bisimidazoline complex compared to that of 20 h –1 for the bisimidazole complex at 1 MPa and 50 °C. Additionally, the hydrogenation proceeds smoothly even under atmospheric pressure at room temperature. The TOF of 43 h –1 for the bisimidazoline complex is comparable to that of a dinuclear complexmore » (70 h –1, highest TOF reported) [Nat. Chem. 2012, 4, 383], which incorporates proton-responsive ligands with pendent-OH groups in the second coordination sphere. The catalytic activity of the complex with an N-methylated imidazoline moiety is much the same as that of the corresponding pyridylimidazoline analogue. Our result and the UV/Vis titrations of the imidazoline complexes indicate that the high activity is not attributable to the deprotonation of NH on the imidazoline under the reaction conditions.« less

Adsorption of Kinetic Hydrate Inhibitors on Growing Surfaces: A Molecular Dynamics Study.

PubMed

Yagasaki, Takuma; Matsumoto, Masakazu; Tanaka, Hideki

2018-04-05

We investigate the mechanism of a typical kinetic hydrate inhibitor (KHI), polyvinylcaprolactam (PVCap), which has been applied to prevent hydrate plugs from forming in gas pipe lines, using molecular dynamics simulations of crystal growth of ethylene oxide hydrate. Water-soluble ethylene oxide is chosen as a guest species to avoid problems associated with the presence of the gas phase in the simulation cell such as slow crystal growth. A PVCap dodecamer adsorbs irreversibly on the hydrate surface which grows at supercooling of 3 K when the hydrophobic part of two pendent groups are trapped in open cages at the surface. The amide hydrogen bonds make no contribution to the adsorption. PVCap can adsorb on various crystallographic planes of sI hydrate. This is in contrast to antifreeze proteins, each of which prefers a specific plane of ice. The trapped PVCap gives rise to necessarily the concave surface of the hydrate. The crystal growth rate decreases with increasing surface curvature, indicating that the inhibition by PVCap is explained by the Gibbs-Thomson effect.

Long-Lasting Impairment of mGluR5-Activated Intracellular Pathways in the Striatum After Withdrawal of Cocaine Self-Administration

PubMed Central

Hoffmann, Hanne Mette; Crouzin, Nadine; Moreno, Estefanía; Raivio, Noora; Fuentes, Silvia; McCormick, Peter J.; Vignes, Michel

2017-01-01

Abstract Background: Cocaine addiction continues to be a major heath concern, and despite public health intervention there is a lack of efficient pharmacological treatment options. A newly identified potential target are the group I metabotropic glutamate receptors, with allosteric modulators showing particular promise. Methods: We evaluated the capacity of group I metabotropic glutamate receptors to induce functional responses in ex vivo striatal slices from rats with (1) acute cocaine self-administration, (2) chronic cocaine self-administration, and (3) 60 days cocaine self-administration withdrawal by Western blot and extracellular recordings of synaptic transmission. Results: We found that striatal group I metabotropic glutamate receptors are the principal mediator of the mGluR1/5 agonist (RS)-3,5-dihydroxyphenylglycine-induced cAMP responsive-element binding protein phosphorylation. Both acute and chronic cocaine self-administration blunted group I metabotropic glutamate receptor effects on cAMP responsive-element binding protein phosphorylation in the striatum, which correlated with the capacity to induce long-term depression, an effect that was maintained 60 days after chronic cocaine self-administration withdrawal. In the nucleus accumbens, the principal brain region mediating the rewarding effects of drugs, chronic cocaine self-administration blunted group I metabotropic glutamate receptor stimulation of extracellular signal-regulated protein kinases 1/2 and cAMP responsive-element binding protein. Interestingly, the group I metabotropic glutamate receptor antagonist/inverse-agonist, 2-methyl-6-(phenylethynyl)pyridine hydrochloride, led to a specific increase in cAMP responsive-element binding protein phosphorylation after chronic cocaine self-administration, specifically in the nucleus accumbens, but not in the striatum. Conclusions: Prolonged cocaine self-administration, through withdrawal, leads to a blunting of group I metabotropic glutamate receptor responses in the striatum. In addition, specifically in the accumbens, group I metabotropic glutamate receptor signaling to cAMP responsive-element binding protein shifts from an agonist-induced to an antagonist-induced cAMP responsive-element binding protein phosphorylation. PMID:27744406

High Catalytic Rates for Hydrogen Production Using Nickel Electrocatalysts with Seven-Membered Diphosphine Ligands Containing One Pendent Amine

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stewart, Michael P.; Ho, Ming-Hsun; Wiese, Stefan

2013-04-24

A series of Ni-based electrocatalysts, [Ni(7PPh2NC6H4X)2](BF4)2, featuring seven-membered cyclic diphosphine ligands incorporating a single amine base, 1-para-X-phenyl-3,6-triphenyl-1-aza-3,6-diphosphacycloheptane (7PPh2NC6H4X where X = OMe, Me, Br, Cl or CF3), have been synthesized and characterized. X-ray diffraction studies have established that the [Ni(7PPh2NC6H4X)2]2+ complexes have a square planar geometry, with bonds to four phosphorus atoms of the two bidentate diphosphine ligands. Coordination of the bidentate phosphine ligands to Ni result in one six-membered ring containing a pendent amine, and one five membered ring. Each of the complexes is an efficient electrocatalyst for hydrogen production at the potential of the Ni(II/I) couple, with turnovermore » frequencies ranging from 2,400 to 27,000 s-1 with [(DMF)H]+ in acetonitrile. Addition of water (up to 1.0 M) accelerates the catalysis, giving turnover frequencies ranging from 4,100 - 96,000 s-1. Computational studies carried out on the [Ni(7PPh2NC6H4X)2]2+ family indicate the catalytic rates reach a maximum when the electron-donating character of X results in the pKa of the pendent amine matching that of the acid used for proton delivery. Additionally, the fast catalytic rates for hydrogen production by the [Ni(7PPh2NC6H4X)2]2+ family relative to the analogous [Ni(PPh2NC6H4X2)2]2+ family are attributed to preferred formation of endo protonated isomers with respect to the metal center in the former, which is essential for the protons to attain suitable proximity to the reduced metal center to generate H2. The results of this work highlight the importance of the necessity for precise pKa matching with the acid for proton delivery to the metal center, and the mechanistic details described herein will be used to guide future catalyst design. This research was supported as part of the Center for Molecular Electrocatalysis, an Energy Frontier Research Center funded by the U.S. Department of Energy, Office of Science, Office of Basic Energy Sciences. A portion of the computing resources were provided at W. R. Wiley Environmental Molecular Science Laboratory (EMSL), a national scientific user facility sponsored by the Department of Energy’s Office of Biological and Environmental Research located at Pacific Northwest National Laboratory.« less

Regulation of Motivation to Self-Administer Ethanol by mGluR5 in Alcohol-Preferring (P) Rats

PubMed Central

Besheer, Joyce; Faccidomo, Sara; Grondin, Julie J. M.; Hodge, Clyde W.

2008-01-01

Background Emerging evidence indicates that Group I metabotropic glutamate receptors (mGluR1 and mGluR5) differentially regulates ethanol self-administration in several rodent behavioral models. The purpose of this work was to further characterize involvement of Group I mGluRs in the reinforcing effects of ethanol using a progressive ratio schedule of reinforcement. Methods Alcohol-preferring (P) rats were trained to self-administer ethanol (15% v/v) versus water on a concurrent schedule of reinforcement, and the effects of the Group I mGluR antagonists were evaluated on progressive ratio performance. The rats were then trained to self-administer sucrose (0.4% w/v) versus water, and the effects of the antagonists were tested on progressive ratio performance. Results The mGluR1 antagonist, 3,4-dihydro-2H-pyrano[2,3]b quinolin-7-yl (cis-4-methoxy-cyclohexyl) methanone (JNJ 16259685; 0 to 1 mg/kg) and the mGluR5 antagonist, 6-methyl-2-(phenylethynyl) pyridine (MPEP; 0 to 10 mg/kg) dose-dependently reduced ethanol break point. In separate locomotor activity assessments, the lowest effective dose of JNJ 16259685 (0.3 mg/kg) produced a motor impairment, whereas the lowest effective dose of MPEP (3 mg/kg) did not. Thus, the reduction in ethanol break point by mGluR1 antagonism was probably a result of a motor impairment. JNJ 16259685 (0.3 mg/kg) and MPEP (10 mg/kg) reduced sucrose break point and produced motor impairments. Thus, the reductions in sucrose break point produced by both Group I antagonists were probably because of nonspecific effects on motor activity. Conclusions Together, these results suggest that glutamate activity at mGluR5 regulates motivation to self-administer ethanol. PMID:18162077

Infusion Processing of Phenylethynyl Terminated Imides by High Temperature RTM and VARTM

NASA Technical Reports Server (NTRS)

Ghose, Sayata; Lewis, Todd M.; Cano, Roberto J.; Watson, Kent A.; Isayev, Avraam I.

2011-01-01

Fabrication of composite structures using infusion processes such as resin transfer molding (RTM) and vacuum assisted resin transfer molding (VARTM) is generally more affordable than conventional autoclave techniques. Recent efforts have focused on adapting both technologies for the fabrication of high temperature (HT) resistant composites. Due to their low melt viscosity and long melt stability, certain phenylethynyl terminated imides (PETI) can be processed into composites using these high temperature out-of-autoclave processes. In the current study, two PETI resins, LARC(TradeMark) PETI-330 and LARC(TradeMark) PETI-8 have been used to make test specimens using both RTM and VARTM. For aerospace applications, a void fraction of less than 2% is desired. Traditionally, RTM has had the advantage over VARTM for generating composites with low void content. However, the process is limited in terms of size. Work at NASA LaRC has incorporated modifications to the thermal cycle used in laminate fabrication that have reduced the void content significantly (typically 1-3%) using the current HT-VARTM process. For composite fabrication by both RTM and VARTM, the resins were infused into three carbon fiber preforms (T650-35-3k 5HS, IM7-6k 5HS, and IM7-6k Uniweave) at 316 C and 260 C respectively and cured up to 371 C. The details of the RTM processing carried out at the University of Akron are discussed in this work along with a brief description of the HT-VARTM processing carried out at NASA-LaRC. Photomicrographs of the panels were taken and void contents were determined by acid digestion. Mechanical properties (short beam shear, SBS) of the panels fabricated by both infusion processes were determined at room temperature as well as at various elevated temperatures. The results of this work are presented herein.

Heterobimetallic N-Heterocyclic Carbene Complexes: A Synthetic, Spectroscopic, and Theoretical Study.

PubMed

Pell, Thomas P; Wilson, David J D; Skelton, Brian W; Dutton, Jason L; Barnard, Peter J

2016-07-18

A new synthetic methodology has been developed for the preparation of heterobimetallic group 11 and group 12 complexes of a symmetrical bis-NHC "pincer" ligand. The synthetic route involved the initial preparation of a mononuclear [Au(NHC)2](+) complex with pendent imidazole moieties on the NHC ligands. Subsequent alkylation of the imidazole groups with Et3OBF4 and metalation with a second metal ion (Ag(I) or Hg(II)) provided two heterobimetallic complexes. Four homobimetallic (Cu(I)2, Ag(I)2, Au(I)2, and Hg(II)2) complexes of the same bis-NHC "pincer" ligand were also prepared. The homobimetallic Cu(I)2, Au(I)2, and Hg(II)2 complexes and heterobimetallic Au(I)-Ag(I) and Au(I)-Hg(II) complexes and the synthetic intermediates for the heterobimetallic complexes were characterized by X-ray crystallography. These X-ray structures show that the bimetallic complexes adopt "twisted" conformations in the solid state, supporting short M···M interactions. Crystalline samples of the homobimetallic Ag(I)2 and Au(I)2 and heterobimetallic Au(I)-Ag(I) and Au(I)-Hg(II) complexes were emissive at room temperature and at 77 K. The geometries of the synthesized complexes were optimized at the M06-L/def2-SVP level of theory, and the electronic nature of the M···M interactions for all synthesized complexes was investigated using natural bond orbital (NBO) calculations.

Modulation of neurological deficits and expression of glutamate receptors during experimental autoimmune encephalomyelitis after treatment with selected antagonists of glutamate receptors.

PubMed

Sulkowski, Grzegorz; Dąbrowska-Bouta, Beata; Strużyńska, Lidia

2013-01-01

The aim of our investigation was to characterize the role of group I mGluRs and NMDA receptors in pathomechanisms of experimental autoimmune encephalomyelitis (EAE), the rodent model of MS. We tested the effects of LY 367385 (S-2-methyl-4-carboxyphenylglycine, a competitive antagonist of mGluR1), MPEP (2-methyl-6-(phenylethynyl)-pyridine, an antagonist of mGluR5), and the uncompetitive NMDA receptor antagonists amantadine and memantine on modulation of neurological deficits observed in rats with EAE. The neurological symptoms of EAE started at 10-11 days post-injection (d.p.i.) and peaked after 12-13 d.p.i. The protein levels of mGluRs and NMDA did not increase in early phases of EAE (4 d.p.i.), but starting from 8 d.p.i. to 25 d.p.i., we observed a significant elevation of mGluR1 and mGluR5 protein expression by about 20% and NMDA protein expression by about 10% over the control at 25 d.p.i. The changes in protein levels were accompanied by changes in mRNA expression of group I mGluRs and NMDARs. During the late disease phase (20-25 d.p.i.), the mRNA expression levels reached 300% of control values. In contrast, treatment with individual receptor antagonists resulted in a reduction of mRNA levels relative to untreated animals.

Atropisomerisation in sterically hindered α,β-disubstituted cyclopentenones derived from an intermolecular cobalt(0)-mediated Pauson-Khand reaction.

PubMed

Moulton, Benjamin E; Lynam, Jason M; Duhme-Klair, Anne-Kathrin; Zheng, Wenxu; Lin, Zhenyang; Fairlamb, Ian J S

2010-12-07

4-(2-Phenylethynyl)-2H-chromen-2-one reacts with norbornene and Co(2)(CO)(8) in an intermolecular Pauson-Khand reaction by focused microwave dielectric heating. Two regioisomeric products are formed; the electron-deficient coumarin moiety preferentially occupies the β-position of the cyclopentenone ring system, whereas the phenyl occupies the α-position. The sterically hindered α,β-(2,3)-disubstituted cyclopentenone regioisomeric products exhibit pronounced atropisomerisation, and the magnitude of the energetic barrier to interconversion between these atropisomers is dependent on the relative position of the coumarin moieties. Interconversion is slow when the coumarin is found in the α-position, whereas interconversion is relatively fast when found in the β-position.

Polymer surface modification using UV treatment for attachment of natamycin and the potential applications for conventional food cling wrap (LDPE)

NASA Astrophysics Data System (ADS)

Shin, Joongmin; Liu, Xiaojing; Chikthimmah, Naveen; Lee, Youn Suk

2016-11-01

The purpose of this study was to develop an active non-migratory antifungal Low Density Polyethylene (LDPE) polymer for use in food packaged applications. The functional acrylic acid monomer was grafted on the LDPE film surface by photo-initiated graft polymerization using Ultra Violet light irradiation (from 0 to 5 min). Natamycin, an antifungal agent, was applied to the treated film to bind with the pendent functional groups and were evaluated its performance against mold and yeast. The grafted amounts were determined by gravimetric measurement and dye absorbance. Attenuated Total Reflectance/Fourier Transfer Infrared Spectroscopy, scanning electron microscopy, mechanical strength test was used to characterize film properties. The antifungal efficacy of the film was evaluated with Saccharomyces cerevisiae and Penicillium chrysogenum on growth media and fresh cut cantaloupe. The amounts of the grafted group were increased with the longer ultraviolet exposure time. The amount of the grafted natamycin on the treated film was up to 49.87 μg/cm2, and the film inhibited mycelium formation of P. chrysogenum spores by over 60%. Due to the thickness of the film (less than 12.25 μm), long time UV exposure decrease the film's mechanical strength. The application of such non-migratory active packaging film represents a promising approach to maintaining food quality with reduced additive.

Structures spatiales localisées dans un oscillateur paramétrique optique (OPO)

NASA Astrophysics Data System (ADS)

Coulibaly, S.; Durniak, C.; Taki, M.

2004-11-01

La prise en compte du caractère non uniforme du pompage optique dans l'étude linéaire et faiblement non linéaire d'un OPO dégénéré (DOPO) a permis de mettre en évidence la discrétisation du seuil et l'existence de structures spatiales localisées de type Hermite-Gauss. L'évolution spatio-temporelle du signal en sortie est quant à elle gouvernée par l'équation de Ginzburg-Landau réelle dont les coefficients dépendent des variables d'espace.

Numerical Study of Primary Blast Injury to Human and Sheep Lung Induced by Simple and Complex Blast Loadings

DTIC Science & Technology

2009-12-01

ont été soumis à des ondes de choc de types simple et complexe. Le but principal de cette étude est de vérifier si les dommages observés dans les...poumons du mouton correspondent à ceux de l’humain. Dans le cas d’ondes de choc simples, neuf courbes qui représentent le niveau de seuil, 1 % et 50...poumons du mouton dépendent plus de la durée et de l’orientation de l’onde de choc . Dans le cas d’ondes de choc complexes, trois courbes ont été

Computational Design of Iron Diphosphine Complexes with Pendant Amines for Hydrogenation of CO2 to Methanol: A Mimic of [NiFe] Hydrogenase.

PubMed

Chen, Xiangyang; Jing, Yuanyuan; Yang, Xinzheng

2016-06-20

Inspired by the active-site structure of the [NiFe] hydrogenase, we have computationally designed the iron complex [P(tBu) 2 N(tBu) 2 )Fe(CN)2 CO] by using an experimentally ready-made diphosphine ligand with pendant amines for the hydrogenation of CO2 to methanol. Density functional theory calculations indicate that the rate-determining step in the whole catalytic reaction is the direct hydride transfer from the Fe center to the carbon atom in the formic acid with a total free energy barrier of 28.4 kcal mol(-1) in aqueous solution. Such a barrier indicates that the designed iron complex is a promising low-cost catalyst for the formation of methanol from CO2 and H2 under mild conditions. The key role of the diphosphine ligand with pendent amine groups in the reaction is the assistance of the cleavage of H2 by forming a Fe-H(δ-) ⋅⋅⋅H(δ+) -N dihydrogen bond in a fashion of frustrated Lewis pairs. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Functional Degradable Polymers by Radical Ring-Opening Copolymerization of MDO and Vinyl Bromobutanoate: Synthesis, Degradability and Post-Polymerization Modification.

PubMed

Hedir, Guillaume G; Bell, Craig A; O'Reilly, Rachel K; Dove, Andrew P

2015-07-13

The synthesis of vinyl bromobutanoate (VBr), a new vinyl acetate monomer derivative obtained by the palladium-catalyzed vinyl exchange reaction between vinyl acetate (VAc) and 4-bromobutyric acid is reported. The homopolymerization of this new monomer using the RAFT/MADIX polymerization technique leads to the formation of novel well-defined and controlled polymers containing pendent bromine functional groups able to be modified via postpolymerization modification. Furthermore, the copolymerization of vinyl bromobutanoate with 2-methylene-1,3-dioxepane (MDO) was also performed to deliver a range of novel functional degradable copolymers, poly(MDO-co-VBr). The copolymer composition was shown to be able to be tuned to vary the amount of ester repeat units in the polymer backbone, and hence determine the degradability, while maintaining a control of the final copolymers' molar masses. The addition of functionalities via simple postpolymerization modifications such as azidation and the 1,3-dipolar cycloaddition of a PEG alkyne to an azide is also reported and proven by (1)H NMR spectroscopy, FTIR spectroscopy, and SEC analyses. These studies enable the formation of a novel class of hydrophilic functional degradable copolymers using versatile radical polymerization methods.

Efficient Cp*Ir Catalysts with Imidazoline Ligands for CO 2 Hydrogenation: Cp*Ir Catalysts with Imidazoline Ligands for CO 2 Hydrogenation

DOE PAGES

Xu, Shaoan; Onishi, Naoya; Tsurusaki, Akihiro; ...

2015-11-09

Here, we report newly developed iridium catalysts with electron-donating imidazoline moieties as ligands for the hydrogenation of CO 2 to formate in aqueous solution. Interestingly, these new complexes promote CO 2 hydrogenation much more effectively than their imidazole analogues and exhibit a turnover frequency (TOF) of 1290 h –1 for the bisimidazoline complex compared to that of 20 h –1 for the bisimidazole complex at 1 MPa and 50 °C. Additionally, the hydrogenation proceeds smoothly even under atmospheric pressure at room temperature. The TOF of 43 h –1 for the bisimidazoline complex is comparable to that of a dinuclear complexmore » (70 h –1, highest TOF reported) [Nat. Chem. 2012, 4, 383], which incorporates proton-responsive ligands with pendent-OH groups in the second coordination sphere. The catalytic activity of the complex with an N-methylated imidazoline moiety is much the same as that of the corresponding pyridylimidazoline analogue. Our result and the UV/Vis titrations of the imidazoline complexes indicate that the high activity is not attributable to the deprotonation of NH on the imidazoline under the reaction conditions.« less

Biological applications of zinc imidazole framework through protein encapsulation

NASA Astrophysics Data System (ADS)

Kumar, Pawan; Bansal, Vasudha; Paul, A. K.; Bharadwaj, Lalit M.; Deep, Akash; Kim, Ki-Hyun

2016-10-01

The robustness of biomolecules is always a significant challenge in the application of biostorage in biotechnology or pharmaceutical research. To learn more about biostorage in porous materials, we investigated the feasibility of using zeolite imidazolate framework (ZIF-8) with respect to protein encapsulation. Here, bovine serum albumin (BSA) was selected as a model protein for encapsulation with the synthesis of ZIF-8 using water as a media. ZIF-8 exhibited excellent protein adsorption capacity through successive adsorption of free BSA with the formation of hollow crystals. The loading of protein in ZIF-8 crystals is affected by the molecular weight due to diffusion-limited permeation inside the crystals and also by the affinity of the protein to the pendent group on the ZIF-8 surface. The polar nature of BSA not only supported adsorption on the solid surface, but also enhanced the affinity of crystal spheres through weak coordination interactions with the ZIF-8 framework. The novel approach tested in this study was therefore successful in achieving protein encapsulation with porous, biocompatible, and decomposable microcrystalline ZIF-8. The presence of both BSA and FITC-BSA in ZIF-8 was confirmed consistently by spectroscopy as well as optical and electron microscopy.

"Yin and Yang" tuned fluorescence sensing behavior of branched 1,4-bis(phenylethynyl)benzene.

PubMed

Sun, Xiaohuan; Qi, Yanyu; Liu, Huijing; Peng, Junxia; Liu, Kaiqiang; Fang, Yu

2014-11-26

Achieving high sensing performance and good photostability of fluorescent films based on adlayer construction represents a significant challenge in the area of functional fluorescent film research. A solution may be offered by "Yin and Yang", a balance idea from Chinese philosophy, for the design of a fluorophore and the relevant assembly. Accordingly, a 1,4-bis(phenylethynyl)benzene (BPEB) derivative (C2) with two cholesteryl residues in the side chains and two glucono units in the head and tail positions was designed and synthesized. As a control, compound C1 was also prepared. The only difference between C1 and C2 is that the hydroxyl groups in the glucono residues of C1 are fully acetylated. Studies of the fluorescence behaviors of the two compounds in solution revealed that both the profile and the intensity of the fluorescence emission of the compounds, in particular C2, are dependent on their concentration and on the nature of solvents employed. Presence of HCl also alters the emission of the compounds in solution. On the basis of the studies, three fluorescent films were prepared, and their sensing performances to HCl in vapor state were studied. Specifically, Film 1 and Film 3 were fabricated via physical coating, separately, of C2 and C1 on glass plate surfaces. As another comparison, Film 2 was also fabricated with C2 as a fluorophore but at a much lower concentration if compared to that for the preparation of Film 1. As revealed by SEM and fluorescent microscopy studies, Film 1 and Film 2 exhibit well-defined microstructures, which are spherical particles and spherical pores, respectively, while Film 3 is characterized by irregular aggregates of C1. Fluorescence measurements demonstrated that Film 1 and Film 3 both display an aggregation emission, of which the emission from Film 1 is supersensitive to the presence of HCl vapor (detection limit: 0.4 ppb, a lowest value reported in the literatures). For Film 3, however, its emission is insensitive to the presence of the vapor. Similarly, the emission from the nonaggregated state of C2, a characteristic emission of Film 2, is also insensitive to the presence of the vapor. Furthermore, the sensing process of Film 1 to the vapor is highly selective and fully reversible, which lays foundation for its real-life uses. As for C2, the results from solution studies and those from film studies demonstrate clearly that introduction of auxiliary structures with opposite properties onto a typical fluorophore is a good strategy to develop fluorescent supramolecular motifs with rich assembly properties and great potential of applications.

High-Temperature Shape Memory Behavior of Semicrystalline Polyamide Thermosets.

PubMed

Li, Ming; Guan, Qingbao; Dingemans, Theo J

2018-05-21

We have explored semicrystalline poly(decamethylene terephthalamide) (PA 10T) based thermosets as single-component high-temperature (>200 °C) shape memory polymers (SMPs). The PA 10T thermosets were prepared from reactive thermoplastic precursors. Reactive phenylethynyl (PE) functionalities were either attached at the chain termini or placed as side groups along the polymer main chain. The shape fixation and recovery performance of the thermoset films were investigated using a rheometer in torsion mode. By controlling the M n of the reactive oligomers, or the PE concentration of the PE side-group functionalized copolyamides, we were able to design dual-shape memory PA 10T thermosets with a broad recovery temperature range of 227-285 °C. The thermosets based on the 1000 g mol -1 reactive PE precursor and the copolyamide with 15 mol % PE side groups show the highest fixation rate (99%) and recovery rate (≥90%). High temperature triple-shape memory behavior can be achieved as well when we use the melt transition ( T m ≥ 200 °C) and the glass transition ( T g = ∼125 °C) as the two switches. The recovery rate of the two recovery steps are highly dependent on the crystallinity of the thermosets and vary within a wide range of 74%-139% and 40-82% for the two steps, respectively. Reversible shape memory events could also be demonstrated when we perform a forward and backward deformation in a triple shape memory cycle. We also studied the angular recovery velocity as a function of temperature, which provides a thermokinematic picture of the shape recovery process and helps to program for desired shape memory behavior.

High-Temperature Shape Memory Behavior of Semicrystalline Polyamide Thermosets

PubMed Central

2018-01-01

We have explored semicrystalline poly(decamethylene terephthalamide) (PA 10T) based thermosets as single-component high-temperature (>200 °C) shape memory polymers (SMPs). The PA 10T thermosets were prepared from reactive thermoplastic precursors. Reactive phenylethynyl (PE) functionalities were either attached at the chain termini or placed as side groups along the polymer main chain. The shape fixation and recovery performance of the thermoset films were investigated using a rheometer in torsion mode. By controlling the Mn of the reactive oligomers, or the PE concentration of the PE side-group functionalized copolyamides, we were able to design dual-shape memory PA 10T thermosets with a broad recovery temperature range of 227–285 °C. The thermosets based on the 1000 g mol–1 reactive PE precursor and the copolyamide with 15 mol % PE side groups show the highest fixation rate (99%) and recovery rate (≥90%). High temperature triple-shape memory behavior can be achieved as well when we use the melt transition (Tm ≥ 200 °C) and the glass transition (Tg = ∼125 °C) as the two switches. The recovery rate of the two recovery steps are highly dependent on the crystallinity of the thermosets and vary within a wide range of 74%–139% and 40–82% for the two steps, respectively. Reversible shape memory events could also be demonstrated when we perform a forward and backward deformation in a triple shape memory cycle. We also studied the angular recovery velocity as a function of temperature, which provides a thermokinematic picture of the shape recovery process and helps to program for desired shape memory behavior. PMID:29742899

Mechanical properties and osteocompatibility of novel biodegradable alanine based polyphosphazenes: Side group effects.

PubMed

Sethuraman, Swaminathan; Nair, Lakshmi S; El-Amin, Saadiq; Nguyen, My-Tien; Singh, Anurima; Krogman, Nick; Greish, Yaser E; Allcock, Harry R; Brown, Paul W; Laurencin, Cato T

2010-06-01

The versatility of polymers for tissue regeneration lies in the feasibility to modulate the physical and biological properties by varying the side groups grafted to the polymers. Biodegradable polyphosphazenes are high-molecular-weight polymers with alternating nitrogen and phosphorus atoms in the backbone. This study is the first of its kind to systematically investigate the effect of side group structure on the compressive strength of novel biodegradable polyphosphazene based polymers as potential materials for tissue regeneration. The alanine polyphosphazene based polymers, poly(bis(ethyl alanato) phosphazene) (PNEA), poly((50% ethyl alanato) (50% methyl phenoxy) phosphazene) (PNEA(50)mPh(50)), poly((50% ethyl alanato) (50% phenyl phenoxy) phosphazene) (PNEA(50)PhPh(50)) were investigated to demonstrate their mechanical properties and osteocompatibility. Results of mechanical testing studies demonstrated that the nature and the ratio of the pendent groups attached to the polymer backbone play a significant role in determining the mechanical properties of the resulting polymer. The compressive strength of PNEA(50)PhPh(50) was significantly higher than poly(lactide-co-glycolide) (85:15 PLAGA) (p<0.05). Additional studies evaluated the cellular response and gene expression of primary rat osteoblast cells on PNEA, PNEA(50)mPh(50) and PNEA(50)PhPh(50) films as candidates for bone tissue engineering applications. Results of the in vitro osteocompatibility evaluation demonstrated that cells adhere, proliferate, and maintain their phenotype when seeded directly on the surface of PNEA, PNEA(50)mPh(50), and PNEA(50)PhPh(50). Moreover, cells on the surface of the polymers expressed type I collagen, alkaline phosphatase, osteocalcin, osteopontin, and bone sialoprotein, which are characteristic genes for osteoblast maturation, differentiation, and mineralization. Copyright 2009 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

Mechanical Properties and Osteocompatibility of Novel Biodegradable Alanine Based Polyphosphazenes: Side Group Effects

PubMed Central

Sethuraman, Swaminathan; Nair, Lakshmi S.; El-Amin, Saadiq; Nguyen, My-Tien; Singh, Anurima; Krogman, Nick; Greish, Yaser E.; Allcock, Harry R.; Brown, Paul W.; Laurencin, Cato T.

2010-01-01

The versatility of polymers for tissue regeneration lies in the feasibility to modulate the physical and biological properties by varying the side groups grafted to the polymers. Biodegradable polyphosphazenes are high molecular weight polymers with alternating nitrogen and phosphorus atoms in the backbone. This study is the first of its kind to systematically investigate the effect of side group structure on the compressive strength of novel biodegradable polyphosphazene based polymers as potential materials for tissue regeneration. The alanine polyphosphazene based polymers, poly[bis(ethyl alanato) phosphazene] (PNEA), poly[(50% ethyl alanato) (50% methyl phenoxy) phosphazene] (PNEA50mPh50), poly[(50% ethyl alanato) (50% phenyl phenoxy) phosphazene] (PNEA50PhPh50) where investigated to demonstrate their mechanical properties and osteocompatibility. Results of mechanical testing studies demonstrated the nature and the ratio of the pendent groups attached to the polymer backbone play a significant role in determining the mechanical properties of the resulting polymer. The compressive strength of PNEA50PhPh50 was significantly higher than poly(lactide-co-glycolide) (85:15 PLAGA) (p<0.05). Additional studies evaluated the cellular response and gene expression of primary rat osteoblast cells on PNEA, PNEA50mPh50 and PNEA50PhPh50 films as candidates for bone tissue engineering applications. Results of the in vitro osteocompatibility evaluation demonstrated that cells adhere, proliferate, and maintain their phenotype when seeded directly on the surface of PNEA, PNEA50mPh50, and PNEA50PhPh50 Moreover cells on the surface of the polymers expressed type I collagen, alkaline phosphatase, osteocalcin, osteopontin, and bone sialoprotein which are characteristic genes for osteoblast maturation, differentiation, and mineralization. PMID:20004751

Novel Phenylethynyl Imide Silanes as Coupling Agents for Titanium Alloy

NASA Technical Reports Server (NTRS)

Park, C.; Lowther, S. E.; Smith, J. G., Jr.; Conell, J. W.; Hergenrother, P. M.; SaintClair, T. L.

2004-01-01

The durability of titanium (Ti) alloys bonded with high temperature adhesives such as polyimides has failed to attain the level of performance required for many applications. The problem to a large part is attributed to the instability of the surface treatment on the Ti substrate. Although Ti alloy adhesive specimens with surface treatments such as chromic acid anodization, Pasa-Jell, Turco, etc. have provided high initial mechanical properties, these properties have decreased as a function of aging at ambient temperature and faster, when aged at elevated temperatures or in a hot-wet environment. As part of the High Speed Civil Transport program where Ti honeycomb sandwich structure must perform for 60,000 hours at 177 C, work was directed to the development of environmentally safe, durable Ti alloy surface treatments.

Development of a Prototype Optical Hydrogen Gas Sensor Using a Getter-Doped Polymer Transducer for Monitoring Cumulative Exposure: Preliminary Results

DOE Office of Scientific and Technical Information (OSTI.GOV)

Small IV, W; Maitland, D J; Wilson, T S

2008-06-05

A novel prototype optical sensor for monitoring cumulative hydrogen gas exposure was fabricated and evaluated. Chemical-to-optical transduction was accomplished by detecting the intensity of 670 nm laser light transmitted through a hydrogen getter-doped polymer film mounted at the end of an optical fiber; the transmittance of the composite film increased with uptake of hydrogen by the embedded getter. The composite film consisted of the hydrogen getter 1,4-bis(phenylethynyl)benzene, also known as DEB, with carbon-supported palladium catalyst embedded in silicone elastomer. Because the change in transmittance was irreversible and occurred continuously as the getter captured hydrogen, the sensor behaved like a dosimeter,more » providing a unique indication of the cumulative gas exposure.« less

Tethered Lubricants

DOE Office of Scientific and Technical Information (OSTI.GOV)

Archer, Lynden

We have performed extensive experimental and theoretical studies of interfacial friction, relaxation dynamics, and thermodynamics of polymer chains tethered to points, planes, and particles. A key result from our tribology studies using lateral force microscopy (LFM) measurements of polydisperse brushes of linear and branched chains densely grafted to planar substrates is that there are exceedingly low friction coefficients for these systems. Specific project achievements include: (1) Synthesis of three-tiered lubricant films containing controlled amounts of free and pendent PDMS chains, and investigated the effect of their molecular weight and volume fraction on interfacial friction. (2.) Detailed studies of a familymore » of hairy particles termed nanoscale organic hybrid materials (NOHMs) and demonstration of their use as lubricants.« less

Structure and physicochemical properties of thin film photosemiconductor cells based on porphine derivatives

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kazak, A. V., E-mail: alexkazak86@gmail.com; Usol’tseva, N. V.; Smirnova, A. I.

2016-05-15

Photosemiconductor thin films based on two organic porphine derivatives have been investigated. These compounds have different pendent groups; the film morphology, along with the specific fabrication technique, is determined to a great extent by these groups. The films have been fabricated by vacuum sputtering and using the Langmuir−Schaefer method. According to the atomic force microscopy (AFM) data, the Langmuir−Schaefer films are more homogeneous than the sputtered ones. It is shown that the sputtered films based on substituted porphine have a looser stacking than the initial analog. A spectroscopy study revealed a bathochromic shift of the Soret band in the Langmuir−Schaefermore » films–sputtered films series. This shift is explained by the increase in the concentration and size of molecular aggregates in sputtered films. It is shown that a polycrystalline C{sub 60} fullerene film deposited onto an amorphous substituted porphine layer improves the photoelectric characteristics of the latter. Both the time stability of the photodiode structure and its ampere‒watt sensitivity increase (by a factor of 10 in the transition regime). The steady-state current does not change. The effect of polarity reversal of the photovoltaic signal is observed in a planar C{sub 60}‒substituted metalloporphine heterostructure, which is similar to the pyroelectric effect. The polarity reversal can be explained by the contribution of the trap charge and discharge current at the interface between the amorphous photosemiconductor and crystalline photosemiconductor to the resulting photoelectric current.« less

Structural study of a novel acetylide-thiourea derivative and its evaluation as a detector of benzene

NASA Astrophysics Data System (ADS)

Khairul, Wan M.; Daud, Adibah Izzati; Mohd Hanifaah, Noor Azura; Arshad, Suhana; Razak, Ibrahim Abdul; Zuki, Hafiza Mohamed; Erben, Mauricio F.

2017-07-01

The new derivative 1-hexanoyl-3-(4-p-tolylethynyl-phenyl)-thiourea (APHX) was synthesised by the addition reaction between 4[4-aminophenyl] ethynyltoluene and hexanoyl isothiocyanate in acetone. The acetylide group was incorporated by using Sonogashira cross-coupling reaction allowing for the preparation of acetylide-thiourea compound. APHX was then elucidated via single crystal X-ray crystallography analysis, spectroscopic and elemental analysis by Fourier Transform Infrared (FT-IR) spectroscopy, 1H and 13C Nuclear Magnetic Resonance (NMR), UV-visible analysis, CHNS-elemental analysis. APHX was also evaluated theoretically via density functional theory (DFT) approach. APHX was fabricated onto glass substrate via drop-cast technique prior to act as optical thin-film and its performance as volatile organic compounds (VOCs) sensor was investigated through the difference in UV-vis profile before and after exposure towards benzene. Preliminary findings revealed that APHX showed interaction towards benzene with about 48% sensitivity. According to thermogravimetric studies, APHX showed good thermal stability, without decomposition up to ca. 190 °C. Whilst, crystal structure of APHX consists in a nearly planar acylthiourea moiety with the Cdbnd O and Cdbnd S bonds utilizing trans position, favoring by an intramolecular Nsbnd H⋯Odbnd C hydrogen bonds. The alkyl chain is oriented 90° with respect to acylthiourea group. The phenyls group in the 1-methyl-4-(phenylethynyl)benzene moieties are mutually planar and slightly twisted with respect to the acylthiourea plane. Centrosymmetric dimers generated by intermolecular Nsbnd H⋯Sdbnd C and Csbnd H⋯Sdbnd C hydrogen bonds forming R22 (8) and R21(6) motifs are present in the crystals. The interaction between APHX with benzene has been modelled and calculated using density functional theory (DFT) via Gaussian 09 software package and the preferred sites of binding are located at the acylthiourea group.

Structure–Activity Relationships Comparing N-(6-Methylpyridin-yl)-Substituted Aryl Amides to 2-Methyl-6-(substituted-arylethynyl)pyridines or 2-Methyl-4-(substituted-arylethynyl)thiazoles as Novel Metabotropic Glutamate Receptor Subtype 5 Antagonists†

PubMed Central

Kulkarni, Santosh S.; Zou, Mu-Fa; Cao, Jianjing; Deschamps, Jeffrey R.; Rodriguez, Alice L.; Conn, P. Jeffrey; Newman, Amy Hauck

2010-01-01

The metabotropic glutamate receptor subtype 5 (mGluR5) has been implicated in anxiety, depression, pain, mental retardation, and addiction. The potent and selective noncompetitive mGluR5 antagonist 2-methyl-6-(phenylethynyl)pyridine (MPEP, 1) has been a critically important tool used to further elucidate the role of mGluR5 in these CNS disorders. In an effort to provide novel and structurally diverse selective mGluR5 antagonists, we previously described a set of analogues with moderate activity wherein the alkyne bond was replaced with an amide group. In the present report, extended series of both amide and alkyne-based ligands were synthesized. MGluR5 binding and functional data were obtained that identified (1) several novel alkynes with comparable affinities to 1 at mGluR5 (e.g., 10 and 20–23), but (2) most structural variations to the amide template were not well tolerated, although a few potent amides were discovered (e.g., 55 and 56). Several of these novel analogues show drug-like physical properties (e.g., cLogP range) 2–5) that support their use for in vivo investigation into the role of mGluR5 in CNS disorders. PMID:19445453

Investigation of 4-amino-5-alkynylpyrimidine-2(1H)-ones as anti-mycobacterial agents.

PubMed

Garg, Gaurav; Pande, Milind; Agrawal, Ambika; Li, Jie; Kumar, Rakesh

2016-04-15

In vitro anti-mycobacterial activities of novel 4-amino-5-alkynylpyrimidine-2(1H)-ones were investigated. 4-Amino-5-heptynylpyrimidine-2(1H)-one (3) and 4-amino-5-(2-phenylethynyl)pyrimidine-2(1H)-one (7) displayed potent in vitro activity against Mycobacterium bovis and Mycobacterium tuberculosis. Compounds 3 and 7 were also assessed for their in vivo activity in BALB/c mice infected with M. tuberculosis (H37Ra). Both compounds showed promising in vivo efficacy at a dose of 25 mg/kg for 2 weeks. Importantly, compounds 3 and 7 interacted synergistically with the front-line anti-tuberculosis drug isoniazid in vitro and in vivo. These results suggest that this class of compounds has strong anti-mycobacterial potential. Copyright © 2016 Elsevier Ltd. All rights reserved.

Synthesis of Structurally Diverse Emissive Molecular Rotors with Four-Component Ugi Stators.

PubMed

García-González, Ma Carmen; Aguilar-Granda, Andrés; Zamudio-Medina, Angel; Miranda, Luis D; Rodríguez-Molina, Braulio

2018-03-02

The use of the multicomponent Ugi reaction to rapidly prepare a library of dumbbell-like molecular rotors is highlighted here. The synthetic strategy consisted of the atom-economic access to 15 bulky and structurally diverse iodinated stators, which were cross-coupled to the 1,4-diethynylphenylene rotator. From those experiments, up to six rotors 1a-c and 1l-n were obtained, with yields ranging from 35 to 69% per coupled C-C bond. In addition to the framework diversity, five of these compounds showed aggregate-enhanced emission properties thanks to their conjugated 1,4-bis(phenylethynyl)benzene cores, a property that rises by increasing the water fraction (f w ) in their THF solutions. The results highlight the significance of the diversity-oriented synthesis of rapid access to new molecular fluorescent rotors.

Thermal stability of poly(ethylene-co-vinyl acetate) based materials

DOE PAGES

Patel, Mogon; Pitts, Simon; Beavis, Peter; ...

2013-03-26

The thermal stability properties of poly (ethylene-co-vinyl acetate) composites have been studied in support of our core programmes in materials qualification and life assessment. The material is used as a binder phase for boron particles in highly filled (70 wt %) composites. Our studies show that the uncured resin readily accumulates acetic acid through hydrolysis of the pendent acetate groups which alters the acidity (pH) of the material. Thermal desorption studies in combination with gas-chromatography-mass spectrometry show that the resin readily evolves acetic acid when thermally aged to temperatures up to 75°C. Gel Permeation Chromatography (GPC) suggests that thermal ageingmore » induces a gradual reduction in resin molecular weight and confirms the susceptibility of the material to chain scission. Heating at elevated temperatures in excess of 300oC is required to induce significant changes in the carbon skeleton through deacetylation and dehydration processes and the production of unsaturated main chain double bonds. Overall, the mechanical response of these filled composites are found to be relatively complex with the extent of polymer-filler interactions possibly playing an important role in determining key engineering properties. Mechanical property studies confirm a small but significant decrease in modulus presumably linked to thermally induced chain scission of the EVA binder.« less

High Temperature Transfer Molding Resins: Preliminary Composite Properties of PETI-375

NASA Technical Reports Server (NTRS)

Connell, J. W.; Smith, J. G., Jr.; Hergenrother, P. M.; Criss, J. M., Jr.

2004-01-01

As part of an ongoing effort to develop materials for resin transfer molding (RTM) of high performance/high temperature composites, a new phenylethynyl containing imide designated as PETI-375 has been under evaluation. PETI-375 was prepared using 2,3,3 ,4 - biphenyltetracarboxylic dianhydride (a-BPDA), 1,3-bis(4-aminophenoxy)benzene and 2,2 - bis(trifluoromethyl)benzidine and endcapped with 4-phenylethynylphthalic anhydride. This material exhibited a stable melt viscosity of 0.1-0.4 Pa sec at 280 C. High quality, void-free laminates were fabricated by high temperature RTM using unsized T-650 carbon fabric and evaluated. After curing for 1 hour at 371 C, the laminates exhibited a glass transition temperature of approx. 375 C by thermomechanical analysis. The laminates were essentially void and microcrack free as evidenced by optical microscopic examination. The chemistry, physical, and composite properties of PETI-375 will be discussed.

In situ immobilization of proteins and RGD peptide on polyurethane surfaces via poly(ethylene oxide) coupling polymers for human endothelial cell growth.

PubMed

Wang, Dong-an; Ji, Jian; Sun, Yong-hong; Shen, Jia-cong; Feng, Lin-xian; Elisseeff, Jennifer H

2002-01-01

A "CBABC"-type pentablock coupling polymer, mesylMPEO, was designed and synthesized to promote human endothelial cell growth on the surfaces of polyurethane biomaterials. The polymer was composed of a central 4,4'-methylenediphenyl diisocyanate (MDI) coupling unit and poly(ethylene oxide) (PEO) spacer arms with methanesulfonyl (mesyl) end groups pendent on both ends. As the presurface modifying additive (pre-SMA), the mesylMPEO was noncovalently introduced onto the poly(ether urethane) (PEU) surfaces by dip coating, upon which the protein/peptide factors (gelatin, albumin, and arginine-glycine-aspartic acid tripeptide [RGD]) were covalently immobilized in situ by cleavage of the original mesyl end groups. The pre-SMA synthesis and PEU surface modification were characterized using nuclear magnetic resonance spectroscopy ((1)H NMR), attenuated total reflection infrared spectroscopy (ATR-FTIR), and X-ray photoelectron spectroscopy (XPS). Human umbilical vein endothelial cells (HUVEC) were harvested manually by collagenase digestion and seeded on the modified PEU surfaces. Cell adhesion ratios (CAR) and cell proliferation ratios (CPR) were measured using flow cytometry, and the individual cell viability (ICV) was determined by MTT assay. The cell morphologies were investigated by optical inverted microscopy (OIM) and scanning electrical microscopy (SEM). The gelatin- and RGD-modified surfaces were HUVEC-compatible and promoted HUVEC growth. The albumin-modified surfaces were compatible but inhibited cell adhesion. The results also indicated that, for HUVEC in vitro cultivation, the cell adhesion stage was of particular importance and had a significant impact on the cell responses to the modified surfaces.

Metabotropic Glutamate Receptor 5 Activity in the Nucleus Accumbens Is Required for the Maintenance of Ethanol Self-Administration in a Rat Genetic Model of High Alcohol Intake

PubMed Central

Besheer, Joyce; Grondin, Julie J.M.; Cannady, Reginald; Sharko, Amanda C.; Faccidomo, Sara; Hodge, Clyde W.

2010-01-01

Background Systemic modulation of Group I and II metabotropic glutamate receptors (mGluRs) regulate ethanol self-administration in a variety of animal models. Although these receptors are expressed in reward-related brain regions, the anatomical specificity of their functional involvement in ethanol self-administration remains to be characterized. This study sought to evaluate the functional role of Group I (mGluR5) and Group II (mGluR2/3) in mesocorticolimbic brain regions in ethanol self-administration. Methods Alcohol-preferring (P) rats, a genetic model of high alcohol drinking, were trained to self-administer ethanol (15% v/v) versus water in operant conditioning chambers. Effects of brain site-specific infusion of the mGluR5 antagonist 2-methyl-6-(phenylethynyl)pyridine hydrochloride (MPEP) and the mGluR2/3 agonist were then assessed on the maintenance of self-administration. Results Microinjection of the mGluR5 antagonist MPEP in the nucleus accumbens reduced ethanol self-administration at a dose that did not alter locomotor activity. By contrast, infusion of the mGluR2/3 agonist LY379268 in the nucleus accumbens reduced self-administration and produced nonspecific reductions in locomotor activity. The mGluR5 involvement showed anatomical specificity as evidenced by lack of effect of MPEP infusion in the dorsomedial caudate or medial prefrontal cortex on ethanol self-administration. To determine reinforcer specificity, P-rats were trained to self-administer sucrose (.4% w/v) versus water, and effects of intra-accumbens MPEP were tested. The MPEP did not alter sucrose self-administration or motor behavior. Conclusions These results suggest that mGluR5 activity specifically in the nucleus accumbens is required for the maintenance of ethanol self-administration in individuals with genetic risk for high alcohol consumption. PMID:19897175

Separate Ionotropic and Metabotropic Glutamate Receptor Functions in Depotentiation vs. LTP: A Distinct Role for Group1 mGluR Subtypes and NMDARs

PubMed Central

Latif-Hernandez, Amira; Faldini, Enrico; Ahmed, Tariq; Balschun, Detlef

2016-01-01

Depotentiation (DP) is a mechanism by which synapses that have recently undergone long-term potentiation (LTP) can reverse their synaptic strengthening within a short time-window after LTP induction. Group 1 metabotropic glutamate receptors (mGluRs) were shown to be involved in different forms of LTP and long-term depression (LTD), but little is known about their roles in DP. Here, we generated DP by applying low-frequency stimulation (LFS) at 5 Hz after LTP had been induced by a single train of theta-burst-stimulation (TBS). While application of LFS for 2 min (DP2′) generated only a short-lasting DP that was independent of the activation of N-methyl-D-aspartate receptors (NMDARs) and group 1 mGluRs, LFS given for 8 min (DP8′) induced a robust DP that was maintained for at least 2 h. This strong form of DP was contingent on NMDAR activation. Interestingly, DP8′ appears to include a metabotropic NMDAR function because it was blocked by the competitive NMDAR antagonist D-AP5 but not by the use-dependent inhibitor MK-801 or high Mg2+. Furthermore, DP8′ was enhanced by application of the mGluR1 antagonist (YM 298198, 1 μM). The mGluR5 antagonist 2-Methyl-6(phenylethynyl) pyridine (MPEP, 40 μM), in contrast, failed to affect it. The induction of LTP, in turn, was NMDAR dependent (as tested with D-AP5), and blocked by MPEP but not by YM 298198. These results indicate a functional dissociation of mGluR1 and mGluR5 in two related and consecutively induced types of NMDAR-dependent synaptic plasticity (LTP → DP) with far-reaching consequences for their role in plasticity and learning under normal and pathological conditions. PMID:27872582

Metabotropic glutamate receptor 5 activity in the nucleus accumbens is required for the maintenance of ethanol self-administration in a rat genetic model of high alcohol intake.

PubMed

Besheer, Joyce; Grondin, Julie J M; Cannady, Reginald; Sharko, Amanda C; Faccidomo, Sara; Hodge, Clyde W

2010-05-01

Systemic modulation of Group I and II metabotropic glutamate receptors (mGluRs) regulate ethanol self-administration in a variety of animal models. Although these receptors are expressed in reward-related brain regions, the anatomical specificity of their functional involvement in ethanol self-administration remains to be characterized. This study sought to evaluate the functional role of Group I (mGluR5) and Group II (mGluR2/3) in mesocorticolimbic brain regions in ethanol self-administration. Alcohol-preferring (P) rats, a genetic model of high alcohol drinking, were trained to self-administer ethanol (15% v/v) versus water in operant conditioning chambers. Effects of brain site-specific infusion of the mGluR5 antagonist 2-methyl-6-(phenylethynyl)pyridine hydrochloride (MPEP) and the mGluR2/3 agonist were then assessed on the maintenance of self-administration. Microinjection of the mGluR5 antagonist MPEP in the nucleus accumbens reduced ethanol self-administration at a dose that did not alter locomotor activity. By contrast, infusion of the mGluR2/3 agonist LY379268 in the nucleus accumbens reduced self-administration and produced nonspecific reductions in locomotor activity. The mGluR5 involvement showed anatomical specificity as evidenced by lack of effect of MPEP infusion in the dorsomedial caudate or medial prefrontal cortex on ethanol self-administration. To determine reinforcer specificity, P-rats were trained to self-administer sucrose (.4% w/v) versus water, and effects of intra-accumbens MPEP were tested. The MPEP did not alter sucrose self-administration or motor behavior. These results suggest that mGluR5 activity specifically in the nucleus accumbens is required for the maintenance of ethanol self-administration in individuals with genetic risk for high alcohol consumption. Copyright 2010 Society of Biological Psychiatry. Published by Elsevier Inc. All rights reserved.

Separate Ionotropic and Metabotropic Glutamate Receptor Functions in Depotentiation vs. LTP: A Distinct Role for Group1 mGluR Subtypes and NMDARs.

PubMed

Latif-Hernandez, Amira; Faldini, Enrico; Ahmed, Tariq; Balschun, Detlef

2016-01-01

Depotentiation (DP) is a mechanism by which synapses that have recently undergone long-term potentiation (LTP) can reverse their synaptic strengthening within a short time-window after LTP induction. Group 1 metabotropic glutamate receptors (mGluRs) were shown to be involved in different forms of LTP and long-term depression (LTD), but little is known about their roles in DP. Here, we generated DP by applying low-frequency stimulation (LFS) at 5 Hz after LTP had been induced by a single train of theta-burst-stimulation (TBS). While application of LFS for 2 min (DP2') generated only a short-lasting DP that was independent of the activation of N -methyl-D-aspartate receptors (NMDARs) and group 1 mGluRs, LFS given for 8 min (DP8') induced a robust DP that was maintained for at least 2 h. This strong form of DP was contingent on NMDAR activation. Interestingly, DP8' appears to include a metabotropic NMDAR function because it was blocked by the competitive NMDAR antagonist D-AP5 but not by the use-dependent inhibitor MK-801 or high Mg 2+ . Furthermore, DP8' was enhanced by application of the mGluR1 antagonist (YM 298198, 1 μM). The mGluR5 antagonist 2-Methyl-6(phenylethynyl) pyridine (MPEP, 40 μM), in contrast, failed to affect it. The induction of LTP, in turn, was NMDAR dependent (as tested with D-AP5), and blocked by MPEP but not by YM 298198. These results indicate a functional dissociation of mGluR1 and mGluR5 in two related and consecutively induced types of NMDAR-dependent synaptic plasticity (LTP → DP) with far-reaching consequences for their role in plasticity and learning under normal and pathological conditions.

Temperature-responsive polymer-brush constructed on a glass substrate by atom transfer radical polymerization.

PubMed

Kitano, Hiromi; Kondo, Takuya; Suzuki, Hisatomo; Ohno, Kohji

2010-05-15

A polymer brush of 2-(2-methoxyethoxy)ethyl methacrylate (MDM) was prepared by atom transfer radical polymerization (ATRP) using a 11-(2-bromoisobutyroyloxy)undecyl moiety-carrying initiator covalently fixed to a glass substrate. An aqueous solution of the MDM polymer (E-PMDM), which had been prepared for comparison, turned to be opaque above certain temperature (26.2 °C for E-PMDM (M(n,GPC)=1.84×10(4))), which was corresponding to the lower critical solution temperature (LCST) of the polymer. The PMDM polymer brush accumulated on the glass surface also indicated temperature-responsive changes in contact angle of air bubble in the air-in-water system. Furthermore, non-specific adsorption of various proteins (bovine serum albumin (BSA), human immunoglobulin G (IgG) and bovine plasma fibrinogen (BPF)) to the surface of polymer brush on the glass plate was examined by the bicinchoninic acid method. The PMDM brush did not adsorb IgG and BPF significantly below the LCST of the polymer chain, whereas adsorbed a larger amount of the proteins above the LCST. A similar but less significant temperature-responsive adsorption was observed in the case of BSA. These results suggest usability of the temperature-responsive polymer-brushes with pendent ω-methoxy oligo(ethylene glycol) groups to coat various materials for bio-medical applications. Copyright © 2010. Published by Elsevier Inc.

Molecular mechanisms of group I metabotropic glutamate receptor mediated LTP and LTD in basolateral amygdala in vitro.

PubMed

Chen, A; Hu, W W; Jiang, X L; Potegal, M; Li, H

2017-02-01

The roles of group I metabotropic glutamate receptors, metabotropic glutamate receptor 1 (mGluR1) and mGluR5, in regulating synaptic plasticity and metaplasticity in the basolateral amygdala (BLA) remain unclear. The present study examined mGluR1- and mGluR5-mediated synaptic plasticity in the BLA and their respective signaling mechanisms. Bath application of the group I mGluR agonist, 3,5-dihydroxyphenylglycine (DHPG) (20 μM), directly suppressed basal fEPSPs (84.5 ± 6.3% of the baseline). The suppressive effect persisted for at least 30 min after washout; it was abolished by the mGluR1 antagonist 7-(hydroxyimino)cyclopropa[b]chromen-1a-carboxylate ethyl ester (CPCCOEt) but was unaffected by the mGluR5 antagonist 2-methyl-6- (phenylethynyl)-pyridine (MPEP). Interestingly, application of DHPG (at both 2 and 20 μM), regardless of the presence of CPCCOEt, could transform single theta burst stimulation (TBS)-induced short-term synaptic potentiation into a long-term potentiation (LTP). Such a facilitating effect could be blocked by the mGluR5 antagonist MPEP. Blockade of phospholipase C (PLC), the downstream enzyme of group I mGluR, with U73122, prevented both mGluR1- and mGluR5-mediated effects on synaptic plasticity. Nevertheless, blockade of protein kinase C (PKC), the downstream enzyme of PLC, with chelerythrine (5 μM) only prevented the transforming effect of DHPG on TBS-induced LTP and did not affect DHPG-induced long-term depression (LTD). These results suggest that mGluR1 activation induced LTD via a PLC-dependent and PKC-independent mechanism, while the priming action of mGluR5 receptor on the BLA LTP is both PLC and PKC dependent. The BLA metaplasticity mediated by mGluR1 and mGluR5 may provide signal switching mechanisms mediating learning and memory with emotional significance.

Group I mGluRs increase excitability of hippocampal CA1 pyramidal neurons by a PLC-independent mechanism.

PubMed

Ireland, David R; Abraham, Wickliffe C

2002-07-01

Previous studies have implicated phospholipase C (PLC)-linked Group I metabotropic glutamate receptors (mGluRs) in regulating the excitability of hippocampal CA1 pyramidal neurons. We used intracellular recordings from rat hippocampal slices and specific antagonists to examine in more detail the mGluR receptor subtypes and signal transduction mechanisms underlying this effect. Application of the Group I mGluR agonist (RS)-3,5-dihydroxyphenylglycine (DHPG) suppressed slow- and medium-duration afterhyperpolarizations (s- and mAHP) and caused a consequent increase in cell excitability as well as a depolarization of the membrane and an increase in input resistance. Interestingly, with the exception of the suppression of the mAHP, these effects were persistent, and in the case of the sAHP lasting for more than 1 h of drug washout. Preincubation with the specific mGluR5 antagonist, 2-methyl-6-(phenylethynyl)-pyridine (MPEP), reduced but did not completely prevent the effects of DHPG. However, preincubation with both MPEP and the mGluR1 antagonist LY367385 completely prevented the DHPG-induced changes. These results demonstrate that the DHPG-induced changes are mediated partly by mGluR5 and partly by mGluR1. Because Group I mGluRs are linked to PLC via G-protein activation, we also investigated pathways downstream of PLC activation, using chelerythrine and cyclopiazonic acid to block protein kinase C (PKC) and inositol 1,4,5-trisphosphate-(IP(3))-activated Ca(2+) stores, respectively. Neither inhibitor affected the DHPG-induced suppression of the sAHP or the increase in excitability nor did an inhibitor of PLC itself, U-73122. Taken together, these results argue that in CA1 pyramidal cells in the adult rat, DHPG activates mGluRs of both the mGluR5 and mGluR1 subtypes, causing a long-lasting suppression of the sAHP and a consequent persistent increase in excitability via a PLC-, PKC-, and IP(3)-independent transduction pathway.

Positional effects of hydroxy groups on catalytic activity of proton-responsive half-sandwich Cp*Iridium(III) complexes

DOE PAGES

Suna, Yuki; Fujita, Etsuko; Ertem, Mehmed Z.; ...

2014-11-12

Proton-responsive half-sandwich Cp*Ir(III) complexes possessing a bipyridine ligand with two hydroxy groups at the 3,3'-, 4,4'-, 5,5'- or 6,6'-positions (3DHBP, 4DHBP, 5DHBP, or 6DHBP) were systematically investigated. UV-vis titration data provided average pK a values of the hydroxy groups on the ligands. Both hydroxy groups were found to deprotonate in the pH 4.6–5.6 range for the 4–6DHBP complexes. One of the hydroxy groups of the 3DHBP complex exhibited the low pK a value of < 0.4 because the deprotonation is facilitated by the strong intramolecular hydrogen bond formed between the generated oxyanion and the remaining hydroxy group, which in turnmore » leads to an elevated pK a value of ~13.6 for the second deprotonation step. The crystal structures of the 4– and 6DHBP complexes obtained from basic aqueous solutions revealed their deprotonated forms. The intramolecular hydrogen bond in the 3DHBP complex was also observed in the crystal structures. The catalytic activities of these complexes in aqueous phase reactions, at appropriate pH, for hydrogenation of carbon dioxide (pH 8.5), dehydrogenation of formic acid (pH 1.8), transfer hydrogenation reactions using formic acid/formate as a hydrogen source (pH 7.2 and 2.6) were investigated to compare the positional effects of the hydroxy groups. The 4– and 6DHBP complexes exhibited remarkably enhanced catalytic activities under basic conditions because of the resonance effect of the strong electrondonating oxyanions, whereas the 5DHBP complex exhibited negligible activity despite the presence of electron-donating groups. The 3DHBP complex exhibited relatively high catalytic activity at low pH owing to the one strong electron-donating oxyanion group stabilized by the intramolecular hydrogen bond. DFT calculations were employed to study the mechanism of CO₂ hydrogenation by the 4DHBP and 6DHBP complexes, and comparison of the activation free energies of the H₂ heterolysis and CO₂ insertion steps indicated that H₂ heterolysis is the rate-determining step for both complexes. The presence of a pendent base in the 6DHBP complex was found to facilitate the rate-determining step, and renders 6DHBP a more effective catalyst for formate production.« less

Extensive metazoan reefs from the Ediacaran Nama Group, Namibia: the rise of benthic suspension feeding.

PubMed

Wood, R; Curtis, A

2015-03-01

We describe new, ecologically complex reef types from the Ediacaran Nama Group, Namibia, dated at ~548 million years ago (Ma), where the earliest known skeletal metazoans, Cloudina riemkeae and Namacalathus, formed extensive reefs up to 20 m in height and width. C. riemkeae formed densely aggregating assemblages associated with microbialite and thrombolite, each from 30 to 100 mm high, which successively colonised former generations to create stacked laminar or columnar reef frameworks. C. riemkeae individuals show budding, multiple, radiating attachment sites and cementation between individuals. Isolated Namacalathus either intergrew with C. riemkeae or formed dense, monospecific aggregations succeeding C. riemkeae frameworks, providing a potential example of environmentally mediated ecological succession. Cloudina and Namacalathus also grow cryptically, either as pendent aggregations from laminar crypt ceilings in microbial framework reefs or as clusters associated with thrombolite attached to neptunian dyke walls. These reefs are notable for their size, exceeding that of the succeeding Lower Cambrian archaeocyath-microbial communities. The repeated colonisation shown by C. riemkeae of former assemblages implies philopatric larval aggregation to colonise limited favourable substrates. As such, not only were skeletal metazoans more important contributors to reef building in the Ediacaran, but there were also more variable reef types with more complex ecologies, than previously thought. Such an abundance of inferred suspension feeders with biomineralised skeletons indicates the efficient exploitation of new resources, more active carbon removal with a strengthened energy flow between planktic and benthic realms, and the rise of biological control over benthic carbonate production. These mark the prelude to the Cambrian Explosion and the modernisation of the global carbon cycle. © 2014 John Wiley & Sons Ltd.

A modular, energy-based approach to the development of nickel containing molecular electrocatalysts for hydrogen production and oxidation.

PubMed

Shaw, Wendy J; Helm, Monte L; DuBois, Daniel L

2013-01-01

This review discusses the development of molecular electrocatalysts for H2 production and oxidation based on nickel. A modular approach is used in which the structure of the catalyst is divided into first, second, and outer coordination spheres. The first coordination sphere consists of the ligands bound directly to the metal center, and this coordination sphere can be used to control such factors as the presence or absence of vacant coordination sites, redox potentials, hydride donor abilities and other important thermodynamic parameters. The second coordination sphere includes functional groups such as pendent acids or bases that can interact with bound substrates such as H2 molecules and hydride ligands, but that do not form strong bonds with the metal center. These functional groups can play diverse roles such as assisting the heterolytic cleavage of H2, controlling intra- and intermolecular proton transfer reactions, and providing a physical pathway for coupling proton and electron transfer reactions. By controlling both the hydride donor ability of the catalysts using the first coordination sphere and the proton donor abilities of the functional groups in the second coordination sphere, catalysts can be designed that are biased toward H2 production, oxidation, or bidirectional (catalyzing both H2 oxidation and production). The outer coordination sphere is defined as that portion of the catalytic system that is beyond the second coordination sphere. This coordination sphere can assist in the delivery of protons and electrons to and from the catalytically active site, thereby adding another important avenue for controlling catalytic activity. Many features of these simple catalytic systems are good models for enzymes, and these simple systems provide insights into enzyme function and reactivity that may be difficult to probe in enzymes. This article is part of a Special Issue entitled: Metals in Bioenergetics and Biomimetics Systems. Copyright © 2013 Elsevier B.V. All rights reserved.

Polyimide Composites Based on Asymmetric Dianhydrides (a-ODPA vs a-BPDA)

NASA Technical Reports Server (NTRS)

Chuang, Kathy C.; Criss, Jim M., Jr.; Mintz, Eric A.

2009-01-01

Two series of low-melt viscosity imide resins (2-15 poise at 260-280 C) were formulated from either asymmetric oxydiphthalic anhydride (a-ODPA) or asymmetric biphenyl dianhydride (a- BPDA) with 4-phenylethynyl endcap (PEPA), along with 3,4'-oxydianiline, 3,4 - methylenedianiline, 3,3 -methylenedianiline or 3,3 -diaminobenzophenone, using a solvent-free melt process. These low-melt viscosity imide resins were fabricated into polyimide/T650-35 carbon fabric composites by resin transfer molding (RTM). Composites from a-ODPA based resins display better open-hole compression strength and short beam shear strength from room temperature to 288 C than that of the corresponding a-BPDA based resins. However, due to the lower Tg s of a-ODPA based resins (265-330 C), their corresponding composites do not possess 315 C use capability while the a-BPDA based composites do. In essence, RTM 370 (T g = 370 C), derived from a-BPDA and 3,4 -ODA and PEPA, exhibits the best overall property performance at 315 C (600 F).

Processing and Characterization of Peti Composites Fabricated by High Temperature Vartm (Section)

NASA Technical Reports Server (NTRS)

Ghose, Sayata; Cano, Roberto J.; Watson, Kent A.; Britton, Sean M.; Jensen, Brian J.; Connell, John W.; Smith, Joseph G., Jr.; Loos, Alfred C.; Heider, Dirk

2011-01-01

The use of composites as primary structures on aerospace vehicles has increased dramatically over the past decade, but so have the production costs associated with their fabrication. For certain composites, high temperature vacuum assisted resin transfer molding (HT-VARTM) can offer reduced fabrication costs compared to conventional autoclave techniques. The process has been successfully used with phenylethynyl terminated imide (PETI) resins developed by NASA Langley Research Center (LaRC). In the current study, three PETI resins have been used to make test specimens using HT-VARTM. Based on previous work at NASA LaRC, larger panels with a quasi-isotropic lay-up were fabricated. The resultant composite specimens exhibited void contents of 3% by volume depending on the type of carbon fabric preform used. Mechanical properties of the panels were determined at both room and elevated temperatures. Fabric permeability characterizations and limited process modeling efforts were carried out to determine infusion times and composite panel size limitations. In addition, new PETI based resins were synthesized specifically for HT-VARTM.

Compensatory molecular and functional mechanisms in nervous system of the Grm1(crv4) mouse lacking the mGlu1 receptor: a model for motor coordination deficits.

PubMed

Rossi, Pia Irene Anna; Musante, Ilaria; Summa, Maria; Pittaluga, Anna; Emionite, Laura; Ikehata, Masami; Rastaldi, Maria Pia; Ravazzolo, Roberto; Puliti, Aldamaria

2013-09-01

The metabotropic glutamate type 1 (mGlu1) and type 5 (mGlu5) receptors, the only members of group I mGlu receptors, are implicated in synaptic plasticity and mechanisms of feedback control of glutamate release. They exhibit nearly complementary distributions throughout the central nervous system, well evident in the cerebellum, where mGlu1 receptor is most intensely expressed while mGlu5 receptor is not. Despite their different distribution, they show a similar subcellular localization and use common transducing pathways. We recently described the Grm1(crv4) mouse with motor coordination deficits and renal anomalies caused by a spontaneous mutation inactivating the mGlu1 receptor. To define the neuropathological mechanisms in these mice, we evaluated expression and function of the mGlu5 receptor in cerebral and cerebellar cortices. Western blot and immunofluorescence analyses showed mGlu5 receptor overexpression. Quantitative reverse transcriptase-polymerase chain reaction results indicated that the up-regulation is already evident at RNA level. Functional studies confirmed an enhanced glutamate release from cortical cerebral and cerebellar synaptosomes when compared with wild-type that is abolished by the mGlu5 receptor-specific inhibitor, 2-methyl-6-(phenylethynyl) pyridine hydrochloride (MPEP). Finally, acute MPEP treatment of Grm1(crv4/crv4) mice induced an evident although incomplete improvement of motor coordination, suggesting that mGlu5 receptors enhanced activity worsens, instead of improving, the motor-coordination defects in the Grm1(crv4/crv4) mice.

Platinum(II) 1,10-phenanthroline complexes of acetylides containing redox-active groups.

PubMed

Siemeling, Ulrich; Bausch, Kirstin; Fink, Heinrich; Bruhn, Clemens; Baldus, Marc; Angerstein, Brigitta; Plessow, Regina; Brockhinke, Andreas

2005-07-21

The new diimine ligand 3,8-di-n-pentyl-4,7-di(phenylethynyl)-1,10-phenanthroline (1) was used for the synthesis of a range of Pt(II) complexes, viz.[Pt(1)Cl2], [Pt(1)(C triple bond C-Ph)2], [Pt(1)(C triple bond C-Fc)2] and [Pt(1)(C triple bond C-p-C6H4-C triple bond C-Fc)2](Fc = ferrocenyl). Crystal structure analyses were performed for [Pt(1)Cl2] and [Pt(1)(C triple bond C-Ph)2] and revealed that the di(acetylide)pi-tweezer of the latter binds a molecule of chloroform through C-H...pi hydrogen bonds. The redox and optical properties of 1 and its complexes were investigated by (spectro-)electrochemistry, UV-Vis and luminescence spectroscopy, and an energy level diagram was derived for [Pt(1)(C triple bond C-Fc)2] and related compounds on the basis of the data collected. The ferrocenyl-substituted Pt(II) complexes are donor-sensitiser assemblies. Intramolecular quenching of the photoexcited Pt(II) diimine unit leads to very short luminescence lifetimes for [Pt(1)(C triple bond C-p-C(6)H(4)-C triple bond C-Fc)2](2 ns) and [Pt(1)(C triple bond C-Fc)2](0.3 ns), as opposed to [Pt(1)(C triple bond C-Ph)2](0.7 micros). Excimer formation has been observed for [Pt(1)(C triple bond C-Ph)(2)] at room temperature in dichloromethane and at low temperatures in frozen glassy dichloromethane and 2-methyltetrahydrofuran solution, but not in the solid state.

Metabotropic glutamate receptor 5 responses dictate differentiation of neural progenitors to NMDA-responsive cells in fragile X syndrome.

PubMed

Achuta, Venkat Swaroop; Grym, Heli; Putkonen, Noora; Louhivuori, Verna; Kärkkäinen, Virve; Koistinaho, Jari; Roybon, Laurent; Castrén, Maija L

2017-04-01

Disrupted metabotropic glutamate receptor 5 (mGluR5) signaling is implicated in many neuropsychiatric disorders, including autism spectrum disorder, found in fragile X syndrome (FXS). Here we report that intracellular calcium responses to the group I mGluR agonist (S)-3,5-dihydroxyphenylglycine (DHPG) are augmented, and calcium-dependent mGluR5-mediated mechanisms alter the differentiation of neural progenitors in neurospheres derived from human induced pluripotent FXS stem cells and the brains of mouse model of FXS. Treatment with the mGluR5 antagonist 2-methyl-6-(phenylethynyl)-pyridine (MPEP) prevents an abnormal clustering of DHPG-responsive cells that are responsive to activation of ionotropic receptors in mouse FXS neurospheres. MPEP also corrects morphological defects of differentiated cells and enhanced migration of neuron-like cells in mouse FXS neurospheres. Unlike in mouse neurospheres, MPEP increases the differentiation of DHPG-responsive radial glial cells as well as the subpopulation of cells responsive to both DHPG and activation of ionotropic receptors in human neurospheres. However, MPEP normalizes the FXS-specific increase in the differentiation of cells responsive only to N-methyl-d-aspartate (NMDA) present in human neurospheres. Exposure to MPEP prevents the accumulation of intermediate basal progenitors in embryonic FXS mouse brain suggesting that rescue effects of GluR5 antagonist are progenitor type-dependent and species-specific differences of basal progenitors may modify effects of MPEP on the cortical development. © 2016 Wiley Periodicals, Inc. Develop Neurobiol 77: 419-437, 2017. © 2016 Wiley Periodicals, Inc.

SKN-1-independent transcriptional activation of glutathione S-transferase 4 (GST-4) by EGF signaling

PubMed Central

Van de Walle, Pieter; Schoofs, Liliane

2016-01-01

ABSTRACT In C. elegans research, transcriptional activation of glutathione S-transferase 4 (gst-4) is often used as a read-out for SKN-1 activity. While many heed an assumed non-exclusivity of the GFP reporter signal driven by the gst-4 promoter to SKN-1, this is also often ignored. We here show that gst-4 can also be transcriptionally activated by EOR-1, a transcription factor mediating effects of the epidermal growth factor (EGF) pathway. Along with enhancing exogenous oxidative stress tolerance, EOR-1 inde-pendently of SKN-1 increases gst-4 transcription in response to augmented EGF signaling. Our findings caution researchers within the C. elegans community to always rely on sufficient experimental controls when assaying SKN-1 transcriptional activity with a gst-4p::gfp reporter, such as SKN-1 loss-of-function mutants and/or additional target genes next to gst-4. PMID:28090393

Growing Embossed Nanostructures of Polymer Brushes on Wet-Etched Silicon Templated via Block Copolymers

PubMed Central

Lu, Xiaobin; Yan, Qin; Ma, Yinzhou; Guo, Xin; Xiao, Shou-Jun

2016-01-01

Block copolymer nanolithography has attracted enormous interest in chip technologies, such as integrated silicon chips and biochips, due to its large-scale and mass production of uniform patterns. We further modified this technology to grow embossed nanodots, nanorods, and nanofingerprints of polymer brushes on silicon from their corresponding wet-etched nanostructures covered with pendent SiHx (X = 1–3) species. Atomic force microscopy (AFM) was used to image the topomorphologies, and multiple transmission-reflection infrared spectroscopy (MTR-IR) was used to monitor the surface molecular films in each step for the sequential stepwise reactions. In addition, two layers of polymethacrylic acid (PMAA) brush nanodots were observed, which were attributed to the circumferential convergence growth and the diffusion-limited growth of the polymer brushes. The pH response of PMAA nanodots in the same region was investigated by AFM from pH 3.0 to 9.0. PMID:26841692

Growing Embossed Nanostructures of Polymer Brushes on Wet-Etched Silicon Templated via Block Copolymers

NASA Astrophysics Data System (ADS)

Lu, Xiaobin; Yan, Qin; Ma, Yinzhou; Guo, Xin; Xiao, Shou-Jun

2016-02-01

Block copolymer nanolithography has attracted enormous interest in chip technologies, such as integrated silicon chips and biochips, due to its large-scale and mass production of uniform patterns. We further modified this technology to grow embossed nanodots, nanorods, and nanofingerprints of polymer brushes on silicon from their corresponding wet-etched nanostructures covered with pendent SiHx (X = 1-3) species. Atomic force microscopy (AFM) was used to image the topomorphologies, and multiple transmission-reflection infrared spectroscopy (MTR-IR) was used to monitor the surface molecular films in each step for the sequential stepwise reactions. In addition, two layers of polymethacrylic acid (PMAA) brush nanodots were observed, which were attributed to the circumferential convergence growth and the diffusion-limited growth of the polymer brushes. The pH response of PMAA nanodots in the same region was investigated by AFM from pH 3.0 to 9.0.

Photo-crosslinkable polymers for fabrication of photonic multilayer sensors

NASA Astrophysics Data System (ADS)

Chiappelli, Maria; Hayward, Ryan C.

2013-03-01

We have used photo-crosslinkable polymers to fabricate photonic multilayer sensors. Benzophenone is utilized as a covalently incorporated pendent photo-crosslinker, providing a convenient means of fabricating multilayer films by sequential spin-coating and crosslinking processes. Colorimetric temperature sensors were designed from thermally-responsive, low-refractive index poly(N-isopropylacrylamide) (PNIPAM) and high-refractive index poly(para-methyl styrene) (P pMS). Copolymer chemistries and layer thicknesses were selected to provide robust multilayer sensors which show color changes across nearly the full visible spectrum due to changes in temperature of the hydrated film stack. We have characterized the uniformity and interfacial broadening within the multilayers, the kinetics of swelling and de-swelling, and the reversibility over multiple hydration/dehydration cycles. We also describe how the approach can be extended to alternative sensor designs through the ability to tailor each layer independently, as well as to additional stimuli by selecting alternative copolymer chemistries.

Polymers containing isolated phenylvinyl substituted carbazole rings as electroactive materials for OLEDs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Griniene, Raimonda; Tavgeniene, Daiva, E-mail: daiva.tavgen@gmail.com; Grigalevičius, Saulius

2016-05-18

Polymers containing pendent 3-(2-phenylvinyl)carbazole moieties have been synthesized by the multi-step synthetic route. The polymers represent materials of high thermal stability with initial thermal degradation temperatures exceeding 370 °C. The glass transition temperatures of the amorphous materials were in the rage of 56–65 °C. The electron photoemission spectra of thin layers of the polymers showed ionization potentials of about 5.6 eV. Hole-transporting properties of the polymeric materials were tested in the structures of organic light emitting diodes with Alq 3 as the green emitter. The device containing hole-transporting layers of poly{9-[6-(3-methyloxetan-3-ylmethoxy)hexyl]-3-(2-phenylvinyl)carbazole} exhibited the best overall performance with a maximum photometricmore » efficiency of about 4.0 cd/A and maximum brightness exceeding 6430 cd/m{sup 2}.« less

Facile preparation of a cationic poly(amino acid) vesicle for potential drug and gene co-delivery

NASA Astrophysics Data System (ADS)

Ding, Jianxun; Xiao, Chunsheng; He, Chaoliang; Li, Mingqiang; Li, Di; Zhuang, Xiuli; Chen, Xuesi

2011-12-01

A novel pH-responsive poly(amino acid) grafted with oligocation was prepared through the combination of ring-opening polymerization (ROP) and subsequent atom transfer radical polymerization (ATRP). Firstly, poly(γ-2-chloroethyl-L-glutamate) (PCELG) with a pendent 2-chloroethyl group was synthesized through ROP of γ-2-chloroethyl-L-glutamate N-carboxyanhydride (CELG NCA) using n-hexylamine as the initiator. Then, PCELG was used to initiate the ARTP of 2-aminoethyl methacrylate hydrochloride (AMA), yielding poly(L-glutamate)-graft-oligo(2-aminoethyl methacrylate hydrochloride) (PLG-g-OAMA). The pKa of PLG-g-OAMA was 7.3 established by the acid-base titration method. The amphiphilic poly(amino acid) could directly self-assemble into a vesicle in PBS. The vesicle was characterized by TEM and DLS. Hydrophilic DOX·HCl was loaded into the hollow core of the vesicle. The in vitro release behavior of DOX·HCl from the vesicle in PBS could be adjusted by the solution pH. In vitro cell experiments revealed that the vesicle could reduce the toxicity of the DOX·HCl. In addition, the preliminary gel retardation assay displayed that PLG-g-OAMA could efficiently bind DNA at a PLG-g-OAMA/DNA weight ratio of 0.3 or above, indicating its potential use as a gene carrier. More in-depth studies of the PLG-g-OAMA vesicle for drug and gene co-delivery in vitro and in vivo are in progress.

Fluorescent metallacycle-cored polymers via covalent linkage and their use as contrast agents for cell imaging.

PubMed

Zhang, Mingming; Li, Shuya; Yan, Xuzhou; Zhou, Zhixuan; Saha, Manik Lal; Wang, Yu-Cai; Stang, Peter J

2016-10-04

The covalent linkage of supramolecular monomers provides a powerful strategy for constructing dynamic polymeric materials whose properties can be readily tuned either by the selection of monomers or the choice of functional linkers. In this strategy, the stabilities of the supramolecular monomers and the reactions used to link the monomers are crucial because such monomers are normally dynamic and can disassemble during the linking process, leading to mixture of products. Therefore, although noncovalent interactions have been widely introduced into metallacycle structures to prepare metallosupramolecular polymers, metallacycle-cored polymers linked by covalent bonds have been rarely reported. Herein, we used the mild, highly efficient amidation reaction between alkylamine and N-hydroxysuccinimide-activated carboxylic acid to link the pendent amino functional groups of a rhomboidal metallacycle 10 to give metallacycle-cored polymers P1 and P2, which further yielded nanoparticles at low concentration and transformed into network structures as the concentration increased. Moreover, these polymers exhibited enhanced emission and showed better quantum yields than metallacycle 10 in methanol and methanol/water (1/9, vol/vol) due to the aggregation-induced emission properties of a tetraphenylethene-based pyridyl donor, which serves as a precursor for metallacycle 10. The fluorescence properties of these polymers were further used in cell imaging, and they showed a significant enrichment in lung cells after i.v. injection. Considering the anticancer activity of rhomboidal Pt(II) metallacycles, this type of fluorescent metallacycle-cored polymers can have potential applications toward lung cancer treatment.

Low dielectric constant and moisture-resistant polyimide aerogels containing trifluoromethyl pendent groups

NASA Astrophysics Data System (ADS)

Wu, Tingting; Dong, Jie; Gan, Feng; Fang, Yuting; Zhao, Xin; Zhang, Qinghua

2018-05-01

Conventional polyimide aerogels made from biphenyl-3,3‧,4,4‧-tetracarboxylic dianydride (BPDA) and 4,4‧-oxidianiline (ODA) exhibit poor resistance to moisture and mechanical properties. In this work, a versatile diamine, 2,2‧-bis-(trifluoromethyl)-4,4‧-diaminobiphenyl (TFMB), is introduced to BPDA/ODA backbone to modify the comprehensive performance of this aerogel. Among all formulations, the resulted polyimide aerogels exhibit the lowest shrinkage and density as well as highest porosity, at the ODA/TFMB molar ratio of 5/5. Dielectric constants and loss tangents of the aerogels fall in the range of 1.29-1.33 and 0.001-0.004, respectively, and more TFMB fractions results in a slightly decrease of dielectric constant and loss tangent. In addition, moisture-resistance of the aerogels are dramatically enhanced as the water absorption decreasing from 415% for BPDA/ODA to 13% for the polyimide aerogel at the ODA/TFMB molar ratio of 7/3, and even to 4% for the homo-BPDA/TFMB polyimide aerogel, showing a superhydrophobic characteristic, which is a great advantage for polyimide aerogels used as low dielectric materials. Meanwhile, all of formulations of aerogels exhibit high absorption capacities for oils and common organic solvents, indicating that these fluorinated polyimide aerogels are good candidates for the separation of oils/organic solvents and water. Mechanical properties and thermal stability of the polyimide aerogels are also raised to varying degrees due to the rigid-rod biphenyl structure introduced by TFMB.

The HIV-1 viral protein Tat increases glutamate and decreases GABA exocytosis from human and mouse neocortical nerve endings.

PubMed

Musante, Veronica; Summa, Maria; Neri, Elisa; Puliti, Aldamaria; Godowicz, Tomasz T; Severi, Paolo; Battaglia, Giuseppe; Raiteri, Maurizio; Pittaluga, Anna

2010-08-01

Human immunodeficiency virus-1 (HIV-1)-encoded transactivator of transcription (Tat) potentiated the depolarization-evoked exocytosis of [(3)H]D-aspartate ([(3)H]D-ASP) from human neocortical terminals. The metabotropic glutamate (mGlu) 1 receptor antagonist 7-(hydroxyimino)cyclopropa[b]chromen-1a-carboxylate ethyl ester (CPCCOEt) prevented this effect, whereas the mGlu5 receptor antagonist 2-methyl-6-(phenylethynyl) pyridine hydrochloride (MPEP) was ineffective. Western blot analysis showed that human neocortex synaptosomes possess mGlu1 and mGlu5 receptors. Tat potentiated the K(+)-evoked release of [(3)H]D-ASP or of endogenous glutamate from mouse neocortical synaptosomes in a CPCCOEt-sensitive and MPEP-insensitive manner. Deletion of mGlu1 receptors (crv4/crv4 mice) or mGlu5 receptors (mGlu5(-/-)mouse) silenced Tat effects. Tat enhanced inositol 1,4,5-trisphosphate production in human and mouse neocortical synaptosomes, consistent with the involvement of group I mGlu receptors. Tat inhibited the K(+)-evoked release of [(3)H]gamma-aminobutyric acid ([(3)H]GABA) from human synaptosomes and that of endogenous GABA or [(3)H]GABA from mouse nerve terminals; the inhibition was insensitive to CPCCOEt or MPEP. Tat-induced effects were retained by Tat(37-72) but not by Tat(48-85). In mouse neocortical slices, Tat facilitated the K(+)- and the veratridine-induced release of [(3)H]D-ASP in a CPCCOEt-sensitive manner and was ineffective in crv4/crv4 mouse slices. These observations are relevant to the comprehension of the pathophysiological effects of Tat in central nervous system and may suggest new potential therapeutic approaches to the cure of HIV-1-associated dementia.

Quick Fabrication of Large-area Organic Semiconductor Single Crystal Arrays with a Rapid Annealing Self-Solution-Shearing Method

PubMed Central

Li, Yunze; Ji, Deyang; Liu, Jie; Yao, Yifan; Fu, Xiaolong; Zhu, Weigang; Xu, Chunhui; Dong, Huanli; Li, Jingze; Hu, Wenping

2015-01-01

In this paper, we developed a new method to produce large-area single crystal arrays by using the organic semiconductor 9, 10-bis (phenylethynyl) anthracene (BPEA). This method involves an easy operation, is efficient, meets the demands of being low-cost and is independent of the substrate for large-area arrays fabrication. Based on these single crystal arrays, the organic field effect transistors exhibit the superior performance with the average mobility extracting from the saturation region of 0.2 cm2 V−1s−1 (the highest 0.47 cm2 V−1s−1) and on/off ratio exceeding 105. In addition, our single crystal arrays also show a very high photoswitch performance with an on/off current ratio up to 4.1 × 105, which is one of the highest values reported for organic materials. It is believed that this method provides a new way to fabricate single crystal arrays and has the potential for application to large area organic electronics. PMID:26282460

High Temperature Resin/Carbon Nanotube Composite Fabrication

NASA Technical Reports Server (NTRS)

Ghose, Sayata; Watson, Kent A.; Sun, Keun J.; Criss, Jim M.; Siochi, Emilie J.; Connell, John W.

2006-01-01

For the purpose of incorporating multifunctionality into advanced composites, blends of phenylethynyl terminated imides-330 (PETI-330) and multi-walled carbon nanotubes (MWCNTs) were prepared, characterized and fabricated into moldings. PETI-330/MWCNT mixtures were prepared at concentrations ranging from 3 to 25 weight percent by dry mixing the components in a ball mill. The resulting powders were characterized for degree of mixing, thermal and rheological properties. Based on the characterization results, PETI-330/MWCNT samples were scaled up to approximately 300 g and used to fabricate moldings by injecting the mixtures at 260-280 deg C into a stainless steel tool followed by curing for 1 h at 371 deg C. The tool was designed to impart a degree of shear during the injection process in an attempt to achieve some alignment of the MWCNTs in the flow direction. Obtained moldings were subsequently characterized for thermal, mechanical, and electrical properties. The degree of dispersion and alignment of MWCNTs were investigated using high-resolution scanning electron microscopy. The preparation and preliminary characterization of PETI-330/MWCNT composites will be discussed.

3D-Printable Silicone Materials with Hydrogen Getter Capability

DOE PAGES

Ortiz-Acosta, Denisse; Moore, Tanya; Safarik, Douglas Joseph; ...

2018-03-01

Organic getters are used to reduce the amount of reactive hydrogen in applications such as nuclear plants and transuranic waste. Here, the present study examines the performance of getter loaded silicone elastomers in reducing reactive hydrogen gas from the gas phase and their capability of being 3D printed using direct ink writing techniques. The samples are placed in closed vessels and exposed to hydrogen atmosphere at pressures of 580 torr and 750 mtorr and at a temperature of 25 °C. The hydrogen consumption is measured as a function of time and normalized to getter concentration in the polymer. The performancemore » of the getter-loaded silicone elastomer containing 1,4-bis[phenylethynyl]benzene (DEB) as the organic getter and Pd/C catalyst (ratio of 3:1 DEB to catalyst) decreases with increasing the resin's curing temperature. Chemical analysis suggests that DEB reacts with the silicone resin at high temperatures. In addition, it is demonstrated that the increased surface area of 3D printed composites results in improved getter performance.« less

Vapor Sensing Using Conjugated Molecule-Linked Au Nanoparticles in a Silica Matrix

DOE PAGES

Dirk, Shawn M.; Howell, Stephen W.; Price, B. Katherine; ...

2009-01-01

Cross-linkedmore » assemblies of nanoparticles are of great value as chemiresistor-type sensors. Herein, we report a simple method to fabricate a chemiresistor-type sensor that minimizes the swelling transduction mechanism while optimizing the change in dielectric response. Sensors prepared with this methodology showed enhanced chemoselectivity for phosphonates which are useful surrogates for chemical weapons. Chemoselective sensors were fabricated using an aqueous solution of gold nanoparticles that were then cross-linked in the presence of the silica precursor, tetraethyl orthosilicate with the α -, ω -dithiolate (which is derived from the in situ deprotection of 1,4-di(Phenylethynyl- 4 ′ , 4 ″ -diacetylthio)-benzene ( 1 ) with wet triethylamine). The cross-linked nanoparticles and silica matrix were drop coated onto interdigitated electrodes having 8  μ m spacing. Samples were exposed to a series of analytes including dimethyl methylphosphonate (DMMP), octane, and toluene. A limit of detection was obtained for each analyte. Sensors assembled in this fashion were more sensitive to dimethyl methylphosphonate than to octane by a factor of 1000.« less

3D-Printable Silicone Materials with Hydrogen Getter Capability

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ortiz-Acosta, Denisse; Moore, Tanya; Safarik, Douglas Joseph

Organic getters are used to reduce the amount of reactive hydrogen in applications such as nuclear plants and transuranic waste. Here, the present study examines the performance of getter loaded silicone elastomers in reducing reactive hydrogen gas from the gas phase and their capability of being 3D printed using direct ink writing techniques. The samples are placed in closed vessels and exposed to hydrogen atmosphere at pressures of 580 torr and 750 mtorr and at a temperature of 25 °C. The hydrogen consumption is measured as a function of time and normalized to getter concentration in the polymer. The performancemore » of the getter-loaded silicone elastomer containing 1,4-bis[phenylethynyl]benzene (DEB) as the organic getter and Pd/C catalyst (ratio of 3:1 DEB to catalyst) decreases with increasing the resin's curing temperature. Chemical analysis suggests that DEB reacts with the silicone resin at high temperatures. In addition, it is demonstrated that the increased surface area of 3D printed composites results in improved getter performance.« less

Alkyne Benzannulation Reactions for the Synthesis of Novel Aromatic Architectures.

PubMed

Hein, Samuel J; Lehnherr, Dan; Arslan, Hasan; J Uribe-Romo, Fernando; Dichtel, William R

2017-11-21

Aromatic compounds and polymers are integrated into organic field effect transistors, light-emitting diodes, photovoltaic devices, and redox-flow batteries. These compounds and materials feature increasingly complex designs, and substituents influence energy levels, bandgaps, solution conformation, and crystal packing, all of which impact performance. However, many polycyclic aromatic hydrocarbons of interest are difficult to prepare because their substitution patterns lie outside the scope of current synthetic methods, as strategies for functionalizing benzene are often unselective when applied to naphthalene or larger systems. For example, cross-coupling and nucleophilic aromatic substitution reactions rely on prefunctionalized arenes, and even directed metalation methods most often modify positions near Lewis basic sites. Similarly, electrophilic aromatic substitutions access single regioisomers under substrate control. Cycloadditions provide a convergent route to densely functionalized aromatic compounds that compliment the above methods. After surveying cycloaddition reactions that might be used to modify the conjugated backbone of poly(phenylene ethynylene)s, we discovered that the Asao-Yamamoto benzannulation reaction is notably efficient. Although this reaction had been reported a decade earlier, its scope and usefulness for synthesizing complex aromatic systems had been under-recognized. This benzannulation reaction combines substituted 2-(phenylethynyl)benzaldehydes and substituted alkynes to form 2,3-substituted naphthalenes. The reaction tolerates a variety of sterically congested alkynes, making it well-suited for accessing poly- and oligo(ortho-arylene)s and contorted hexabenzocoronenes. In many cases in which asymmetric benzaldehyde and alkyne cycloaddition partners are used, the reaction is regiospecific based on the electronic character of the alkyne substrate. Recognizing these desirable features, we broadened the substrate scope to include silyl- and halogen-substituted alkynes. Through a combined experimental and computational approach, we have elucidated mechanistic insight and key principles that govern the regioselectivity outcome of the benzannulation of structurally diverse alkynes. We have applied these methods to prepare sterically hindered, shape-persistent aromatic systems, heterocyclic aromatic compounds, functionalized 2-aryne precursors, polyheterohalogenated naphthalenes, ortho-arylene foldamers, and graphene nanoribbons. As a result of these new synthetic avenues, aromatic structures with interesting properties were uncovered such as ambipolar charge transport in field effect transistors based on our graphene nanoribbons, conformational aspects of ortho-arylene architectures resulting from intramolecular π-stacking, and modulation of frontier molecular orbitals via protonation of heteroatom containing aromatic systems. Given the availability of many substituted 2-(phenylethynyl)benzaldehydes and the regioselectivity of the benzannulation reaction, naphthalenes can be prepared with control of the substitution pattern at seven of the eight substitutable positions. Researchers in a range of fields are likely to benefit directly from newly accessible molecular and polymeric systems derived from polyfunctionalized naphthalenes.

Polyester with Pendent Acetylcholine-Mimicking Functionalities Promotes Neurite Growth.

PubMed

Wang, Shaofei; Jeffries, Eric; Gao, Jin; Sun, Lijie; You, Zhengwei; Wang, Yadong

2016-04-20

Successful regeneration of nerves can benefit from biomaterials that provide a supportive biochemical and mechanical environment while also degrading with controlled inflammation and minimal scar formation. Herein, we report a neuroactive polymer functionalized by covalent attachment of the neurotransmitter acetylcholine (Ach). The polymer was readily synthesized in two steps from poly(sebacoyl diglyceride) (PSeD), which previously demonstrated biocompatibility and biodegradation in vivo. Distinct from prior acetylcholine-biomimetic polymers, PSeD-Ach contains both quaternary ammonium and free acetyl moieties, closely resembling native acetylcholine structure. The polymer structure was confirmed via (1)H nuclear magnetic resonance and Fourier-transform infrared spectroscopy. Hydrophilicity, charge, and thermal properties of PSeD-Ach were determined by tensiometer, zetasizer, differential scanning calorimetry, and thermal gravimetric analysis, respectively. PC12 cells exhibited the greatest proliferation and neurite outgrowth on PSeD-Ach and laminin substrates, with no significant difference between these groups. PSeD-Ach yielded much longer neurite outgrowth than the control polymer containing ammonium but no the acetyl group, confirming the importance of the entire acetylcholine-like moiety. Furthermore, PSeD-Ach supports adhesion of primary rat dorsal root ganglions and subsequent neurite sprouting and extension. The sprouting rate is comparable to the best conditions from previous report. Our findings are significant in that they were obtained with acetylcholine-like functionalities in 100% repeating units, a condition shown to yield significant toxicity in prior publications. Moreover, PSeD-Ach exhibited favorable mechanical and degradation properties for nerve tissue engineering application. Humidified PSeD-Ach had an elastic modulus of 76.9 kPa, close to native neural tissue, and could well recover from cyclic dynamic compression. PSeD-Ach showed a gradual in vitro degradation under physiologic conditions with a mass loss of 60% within 4 weeks. Overall, this simple and versatile synthesis provides a useful tool to produce biomaterials for creating the appropriate stimulatory environment for nerve regeneration.

Four N(7)-benzyl-substituted 4,5,6,7-tetrahydro-1H-pyrazolo[3,4-b]pyridine-5-spiro-1'-cyclohexane-2',6'-diones as ethanol hemisolvates: similar molecular constitutions but different crystal structures.

PubMed

Cruz, Silvia; Trilleras, Jorge; Cobo, Justo; Low, John N; Glidewell, Christopher

2008-12-01

3-tert-Butyl-7-(4-chlorobenzyl)-4',4'-dimethyl-1-phenyl-4,5,6,7-tetrahydro-1H-pyrazolo[3,4-b]pyridine-5-spiro-1'-cyclohexane-2',6'-dione ethanol hemisolvate, C(30)H(34)ClN(3)O(2) x 0.5C(2)H(6)O, (I), its 7-(4-bromobenzyl)- analogue, C(30)H(34)BrN(3)O(2) x 0.5C(2)H(6)O, (II), and its 7-(4-methylbenzyl)- analogue, C(31)H(37)N(3)O(2) x 0.5C(2)H(6)O, (III), are isomorphous, with the ethanol component disordered across a twofold rotation axis in the space group C2/c. In the corresponding 7-[4-(trifluoromethyl)benzyl]- compound, C(31)H(34)F(3)N(3)O(2) x 0.5C(2)H(6)O, (IV), the ethanol component is disordered across a centre of inversion in the space group P\\overline{1}. In each of (I)-(IV), the reduced pyridine ring adopts a half-chair conformation. The heterocyclic components in (I)-(III) are linked into centrosymmetric dimers by a single C-H...pi interaction, with the half-occupancy ethanol component linked to the dimer by a combination of C-H...O and O-H...pi(arene) hydrogen bonds. The heterocyclic molecules in (IV) are linked into chains of centrosymmetric rings by C-H...O and C-H...pi hydrogen bonds, again with the half-occupancy ethanol component pendent from the chain. The significance of this study lies in the isomorphism of the related derivatives (I)-(III), in the stoichiometric hemisolvation by ethanol, where the disordered solvent molecule is linked to the heterocyclic component by a two-point linkage, and in the differences between the crystal structures of (I)-(III) and that of (IV).

Rare and Rare-Earth Metals in Coal Processing Waste

NASA Astrophysics Data System (ADS)

Cherkasova, Tatiana; Cherkasova, Elizaveta; Tikhomirova, Anastasia; Bobrovni-kova, Alyona; Goryunova, Irina

2017-11-01

An urgent issue for power plants operating on solid fuels (coal) is the issue of utilization or use of accumulated production waste - ash and slag materials - in the related production. Ash-slag materials are classified as "waste", usually grade 5; tens of millions of tons of them being pro-duced annually in the Kemerovo region, which threatens the ecology of the region. At the same time, ash and slag is a very promising raw material. The use of this material as a base for the final product allows us to signifi-cantly expand the possibilities of using coal. The most widespread is the system of ash and slag involving in construction or as a replacement for sand in road construction, or as an additive to building mixtures. However, there are both industrially valuable and environmentally dangerous ele-ments in ash-slag materials. Ash-slag materials can be considered as inde-pendent ore deposits located on the surface and requiring the costs of their extraction.

Electro-active polymers containing pendent 2,7-diarylfluorene fragments as materials for OLEDs

NASA Astrophysics Data System (ADS)

Krucaite, G.; Tavgeniene, D.; Peciulyte, L.; Buika, G.; Liu, L.; Zhang, B.; Xie, Z.; Grigalevicius, S.

2016-05-01

Poly[2-phenyl-7-(4-vinylphenyl)-9,9-diethylfluorene)], poly[2-(1-naphtyl)-7-(4-vinylphenyl)-9,9-diethylfluorene)] and poly[2-(4-biphenyl)-7-(4-vinylphenyl)-9,9-diethylfluorene)] were synthesized and characterized by NMR spectroscopy, elemental analysis and gel permeation chromatography. The derivatives represent materials of high thermal stability with initial thermal destruction temperatures from 390°C to 400 °C. The glass transition temperatures of the amorphous materials were 182 °C, 151 °C and 159 °C respectively. Hole-transporting properties of the polymeric materials were tested in the structures of organic light emitting diodes with Alq3 as the green emitter and electron transporting material. The device containing hole-transporting layers of polymer with 2-(4-biphenyl)-7-(4-vinylphenyl)-9,9-diethylfluorene moieties exhibited the best overall performance with turn on voltage of 3.6 V, a maximum photometric efficiency of 3.1 cd/A and maximum brightness of about 5300 cd/m2.

Tunable photonic multilayer sensors from photo-crosslinkable polymers

NASA Astrophysics Data System (ADS)

Chiappelli, Maria; Hayward, Ryan

2014-03-01

The fabrication of tunable photonic multilayer sensors from stimuli-responsive, photo-crosslinkable polymers will be described. Benzophenone is covalently incorporated as a pendent photo-crosslinker, allowing for facile preparation of multilayer films by sequential spin-coating and crosslinking processes. Copolymer chemistries and layer thicknesses are selected to provide robust multilayer sensors which can show color changes across nearly the full visible spectrum due to the specific stimulus-responsive nature of the hydrated film stack. We will describe how this approach is extended to alternative sensor designs by tailoring the thickness and chemistry of each layer independently, allowing for the preparation of sensors which depend not only on the shift in wavelength of a reflectance peak, but also on the transition between Bragg mirrors and filters. Device design is optimized by photo-patterning sensor arrays on a single substrate, providing more efficient fabrication time as well as multi-functional sensors. Finally, radiation-sensitive multilayers, designed by choosing polymers which will preferentially degrade or crosslink under ionizing radiation, will also be described.

The 2014 Philip S. Portoghese Medicinal Chemistry Lectureship: The "Phenylalkylaminome" with a Focus on Selected Drugs of Abuse.

PubMed

Glennon, Richard A

2017-04-13

The phenylalkylamine, particularly the phenylethylamine, moiety is a common structural feature found embedded in many clinically approved agents. Greater still is its occurrence in drugs of abuse. The simplest phenylethylamine, 2-phenylethylamine itself, is without significant central action when administered at moderate doses, but fairly simple structural modifications profoundly impact its pharmacology and result in large numbers of useful pharmacological tools, agents with therapeutic potential, and in drugs of abuse (e.g., hallucinogens, central stimulants, empathogens), the latter of which are the primary focus here. In vivo drug discrimination techniques and in vitro receptor/transporter methods have been applied to understand the actions of these phenylalkylamines and their mechanisms of action. Thus far, depending upon pendent substituents, certain receptors (e.g., serotonin receptors) and monoamine transporters (i.e., serotonin, dopamine, and norepinephrine transporters) have been implicated as playing major roles in the actions of these abused agents in a complex and, at times, interwoven manner.

Tracking Hole Transport in DNA Hairpins Using a Phenylethynylguanine Nucleobase.

PubMed

Brown, Kristen E; Singh, Arunoday P N; Wu, Yi-Lin; Mishra, Ashutosh Kumar; Zhou, Jiawang; Lewis, Frederick D; Young, Ryan M; Wasielewski, Michael R

2017-08-30

The hole transport dynamics of DNA hairpins possessing a stilbene electron acceptor and donor along with a modified guanine (G) nucleobase, specifically 8-(4'-phenylethynyl)deoxyguanosine, or EG, have been investigated. The nearly indistinguishable oxidation potentials of EG and G and unique spectroscopic characteristics of EG +• make it well-suited for directly observing transient hole occupation during charge transport between a stilbene electron donor and acceptor. In contrast to the cation radical G +• , EG +• possesses a strong absorption near 460 nm and has a distinct Raman-active ethynyl stretch. Both spectroscopic characteristics are easily distinguished from those of the stilbene donor/acceptor radical ion chromophores. Employing EG, we observe its role as a shallow hole trap, or as an intermediate hole transport site when a deeper trap state is present. Using a combination of ultrafast absorption and stimulated Raman spectroscopies, the hole-transport dynamics are observed to be similar in systems having EG vs G bases, with small perturbations to the charge transport rates and yields. These results show EG can be deployed at specified locations throughout the sequence to report on hole occupancy, thereby enabling detailed monitoring of the hole transport dynamics with base-site specificity.

Processing and properties of fiber reinforced polymeric matrix composites: I. IM7/LARC(TM)-PETI-7 polyimide composites

NASA Technical Reports Server (NTRS)

Hou, Tan-Hung

1995-01-01

A phenylethynyl terminated imide oligomer formed from the reaction of benzophenone tetracarboxylic acid dianhydride, an 75:25 molar ratio of 4,4'-oxydianiline and meta-phenylenediamine and 4-phenylethynylphthalic anhydride as the endcapper at a theoretical number average molecular weight (Mn) of approximately 3,700 g/mol was evaluated as a composite resin matrix. A glass transition temperature (Tg) of 315 deg C was reached after 250 deg C/1 hr annealing of the matrix resin. Unidirectional prepreg was made by coating an N-methylpyrrolidinone solution of the amide acid oligomer onto unsized IM7 graphite fibers. The thermal and rheological properties and the solvent/volatile depletion rates of the amide acid/NMP system were determined. This information was used to successfully design a molding cycle for composite fabrication. Composites molded under 800 Psi at 371 C consistently yielded good consolidation as measured by C-scan and optical photomicrography. The composite's short beam shear strength (SBS), longitudinal and transverse flexural strengths and moduli were measured at various temperatures. These composites exhibited excellent room temperature (RT) longitudinal flexural strength and modulus and RT SBS strength retention at 177 C.

Preparation and Characterization of PETI-330/Multiwalled Carbon Nanotube

NASA Technical Reports Server (NTRS)

Ghose, Sayata; Watson, Kent A.; Working, Dennis C.; Criss, Jim M.; Siochi, Emilie J.; Connell, John W.

2005-01-01

As part of an ongoing effort to incorporate multifunctionality into advanced composites, blends of PETI-330 and multi-walled carbon nanotubes (MWCNTs) were prepared, characterized and fabricated into moldings. The PETI-330/MWCNT mixtures were prepared at concentrations ranging from 3 to 25 weight percent by dry mixing the components in a ball mill. The resulting powders were characterized for degree of mixing, thermal and rheological properties. Based on the characterization results, PETI-330/MWCNT samples were scaled up to 300 g and used to fabricate moldings 10.2 cm x 15.2 cm x 0.32 cm thick. The moldings were made by injecting the mixtures at 260-280 C into an Invar tool followed by curing for 1 h at 371 C. The tool was designed to impart shear during the injection process in an attempt to achieve some alignment of the MWCNTs in the flow direction. Good quality moldings were obtained that were subsequently characterized for thermal, mechanical and electrical properties. The degree of dispersion and alignment of the MWCNTs were investigated using high-resolution scanning electron microscopy. The preparation and preliminary characterization of PETI-330/MWCNT composites will be discussed. Keywords: phenylethynyl terminated imides, high temperature polymers, nanocomposites, moldings

Preparation and characterization of novel polyimide/functionalized ZnO bionanocomposite for gas separation and study of their antibacterial activity

NASA Astrophysics Data System (ADS)

Esmaielzadeh, Sheida; Ahmadizadegan, Hashem

2018-04-01

In the present investigation novel Polyimide/functionalized ZnO (PI/ZnO) bionanocomposites containing amino acid (Methionine) and benzimidazole pendent groups with different amounts of modified ZnO nanoparticles (ZnO NPs) were successfully prepared through ultrasonic irradiation technique. Due to the high surface energy and tendency for agglomeration, the surface ZnO NPs was modified by a coupling agent as 3- methacryloxypropyl-trimethoxysilane (MPS) to form MPS-ZnO nanoparticles. The ultrasonic irradiation effectively changes the rheology and the glass transition temperature and the crystallinity of the composite polymer. PI/ZnO nanocomposites were characterized by Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscope (TEM). TEM analysis showed that the modified ZnO nanoparticles were homogeneously dispersed in polymer matrix. The TGA results of PI/ZnO nanocomposites showed that the thermal stability is obviously improved the presence of MPS-ZnO NPs in comparison with the pure PI and that this increase is higher when the NP content increases. The permeabilities of pure H2, CH4, O2, and N2 gases through prepared membranes were determined at room temperature (25 °C) and 20 bar feed pressure. The membranes having 20% ZnO showed higher values of H2 permeability, and H2/CH4 and H2/N2 ideal selectivities (the ratio of pair gas permeabilities) compared with other membranes. The antibacterial activity of bionanocomposite films was tested against gram-positive bacteria (Staphylococcus aureus and Bacillus subtilis) and gram-negative bacteria (Escherichia coli and Pseudomonas aeruginosa). Further, it was observed that antibacterial activity of the resulting hybrid biofilms showed somewhat higher for gram-positive bacteria compared to gram-negative bacteria.

Mathematical and computational studies of equilibrium capillary free surfaces

NASA Technical Reports Server (NTRS)

Albright, N.; Chen, N. F.; Concus, P.; Finn, R.

1977-01-01

The results of several independent studies are presented. The general question is considered of whether a wetting liquid always rises higher in a small capillary tube than in a larger one, when both are dipped vertically into an infinite reservoir. An analytical investigation is initiated to determine the qualitative behavior of the family of solutions of the equilibrium capillary free-surface equation that correspond to rotationally symmetric pendent liquid drops and the relationship of these solutions to the singular solution, which corresponds to an infinite spike of liquid extending downward to infinity. The block successive overrelaxation-Newton method and the generalized conjugate gradient method are investigated for solving the capillary equation on a uniform square mesh in a square domain, including the case for which the solution is unbounded at the corners. Capillary surfaces are calculated on the ellipse, on a circle with reentrant notches, and on other irregularly shaped domains using JASON, a general purpose program for solving nonlinear elliptic equations on a nonuniform quadrilaterial mesh. Analytical estimates for the nonexistence of solutions of the equilibrium capillary free-surface equation on the ellipse in zero gravity are evaluated.

A discrete water hexamer with a new planar tetrameric water moiety trapped in the crystal host of [Ag(azelate)(4,4‧-bipyridine)]·(H2O)3

NASA Astrophysics Data System (ADS)

Luo, Geng-Geng; Wu, Dong-Liang; Liu, Li; Xia, Jiu-Xu; Li, Dong-Xu; Dai, Jing-Cao; Xiao, Zi-Jing

2011-11-01

The ultrasonic reaction of Ag 2O, bipy and H 2aze gave rise to a novel Ag(I) mixed-ligand coordination polymer, namely [Ag(aze)(bipy)]·(H 2O) 3 ( 1) (bipy = 4,4'-bipyridine, H 2aze = azelaic acid). In 1, Ag(I) ions are linked by bipy and aze ligands to form a single two-dimensional (2D) undulated net with a (6,3) topology, incorporating Ag 6(bipy) 4(aze) 2 windows of 22.58 × 11.06 Å based on Ag⋯Ag distances. A pair of identical 2D single nets are interconnected via π⋯π stacking and unsupported Ag⋯Ag interactions to generate a 2D double-layered net. A discrete water hexamer composed of a new planar tetrameric water ring and two pendent water molecules is perpendicularly located in each hydrophilic cavity of the 2D bilayer and acts as a 'glue' to assemble adjacent 2D double-layered nets into a three-dimensional (3D) structure.

Energy dynamics, foraging ecology, and behavior of prenesting greater white-fronted geese

USGS Publications Warehouse

Budeau, D.A.; Ratti, John T.; Ely, Craig R.

1991-01-01

We collected greater white-fronted geese (Anser albifrons frontalis) on their nesting grounds on the Yukon-Kuskokwim Delta, Alaska, when they arrived and again before incubation during 1986 and 1987. Body mass, water content, crude fat, and crude protein increased in female geese between arrival and incubation onset in 1986 and 1987 (P = 0.0001, 0.0002, 0.0329, and 0.0003, respectively). Body mass of male geese during prenesting did not change, but total fat content decreased by about 30%. Crude protein of males was different between years (P = 0.0014). Female geese spent more time feeding than did males (P < 0.001). Primary foods during the prenesting period were pendent grass (Arctophila fulva) shoots and arrowgrass (Triglochin palustris) bulbs. Gizzard contents and orifice staining indicated crowberries (Empetrum nigrum) also were consumed. Of the commonly consumed food items, arrowgrass bulbs had the greatest protein content (21%), and crowberries had the greatest lipid content (10%). Unlike other medium-sized, northern-nesting geese, food (energy) acquired on the nesting grounds by white-fronted geese before incubation increased endogenous reserves necessary for reproduction.

Glutamate metabotropic receptors as targets for drug therapy in epilepsy.

PubMed

Moldrich, Randal X; Chapman, Astrid G; De Sarro, Giovambattista; Meldrum, Brian S

2003-08-22

Metabotropic glutamate (mGlu) receptors have multiple actions on neuronal excitability through G-protein-linked modifications of enzymes and ion channels. They act presynaptically to modify glutamatergic and gamma-aminobutyric acid (GABA)-ergic transmission and can contribute to long-term changes in synaptic function. The recent identification of subtype-selective agonists and antagonists has permitted evaluation of mGlu receptors as potential targets in the treatment of epilepsy. Agonists acting on group I mGlu receptors (mGlu1 and mGlu5) are convulsant. Antagonists acting on mGlu1 or mGlu5 receptors are anticonvulsant against 3,5-dihydroxyphenylglycine (DHPG)-induced seizures and in mouse models of generalized motor seizures and absence seizures. The competitive, phenylglycine mGlu1/5 receptor antagonists generally require intracerebroventricular administration for potent anticonvulsant efficacy but noncompetitive antagonists, e.g., (3aS,6aS)-6a-naphthalen-2-ylmethyl-5-methyliden-hexahydrocyclopenta[c]furan-1-on (BAY36-7620), 2-methyl-6-(phenylethynyl)pyridine hydrochloride (MPEP), and 2-methyl-6-(2-phenylethenyl)pyridine (SIB-1893) block generalized seizures with systemic administration. Agonists acting on group II mGlu receptors (mGlu2, mGlu3) to reduce glutamate release are anticonvulsant, e.g., 2R,4R-aminopyrrolidine-2,4-dicarboxylate [(2R,4R)-APDC], (+)-2-aminobicyclo[3.1.0]hexane-2,6-dicarboxylic acid (LY354740), and (-)-2-oxa-4-aminobicyclo[3.1.0]hexane-4,6-dicarboxylate (LY379268). The classical agonists acting on group III mGlu receptors such as L-(+)-2-amino-4-phosphonobutyric acid, and L-serine-O-phosphate are acutely proconvulsant with some anticonvulsant activity. The more recently identified agonists (R,S)-4-phosphonophenylglycine [(R,S)-PPG] and (S)-3,4-dicarboxyphenylglycine [(S)-3,4-DCPG] and (1S,3R,4S)-1-aminocyclopentane-1,2,4-tricarboxylic acid [ACPT-1] are all anticonvulsant without proconvulsant effects. Studies in animal models of kindling reveal some efficacy of mGlu receptor ligands against fully kindled limbic seizures. In genetic mouse models, mGlu1/5 antagonists and mGlu2/3 agonists are effective against absence seizures. Thus, antagonists at group I mGlu receptors and agonists at groups II and III mGlu receptors are potential antiepileptic agents, but their clinical usefulness will depend on their acute and chronic side effects. Potential also exists for combining mGlu receptor ligands with other glutamatergic and non-glutamatergic agents to produce an enhanced anticonvulsant effect. This review also discusses what is known about mGlu receptor expression and function in rodent epilepsy models and human epileptic conditions.

Impact of bulk and surface properties of some biocompatible hydrophobic polymers on the stability of methylene chloride-in-water mini-emulsions used to prepare nanoparticles by emulsification-solvent evaporation.

PubMed

Babak, Valery G; Baros, Francis; Boulanouar, Omar; Boury, Frank; Fromm, Michel; Kildeeva, Nathalie R; Ubrich, Nathalie; Maincent, Philippe

2007-10-01

The emulsifying and stabilizing ability of several hydrophobic (insoluble in water and soluble in volatile organic solvents) polymers, such as Eudragit RL, Eudragit RS, PLGA, PCL, and their mixtures, with regard to the methylene chloride (MC)-in-water mini-emulsions, has been compared to the viscosity of MC solutions and to the properties of adsorption and spread monolayers of these polymers. Eudragits RS and RL contain approximately 2.5 and approximately 5 mol% of pendent cationic trimethylammonium (TMA) groups per approximately 164 g/mol segments, whereas PLGA and PCL contain 1 and 2 polar carbonyl groups per 130 and 114 g/mol, respectively. The electrostatic attraction between the dipoles, formed by TMA groups and the condensed counter ions in the MC solutions, leads to the contraction of macromolecular coils of Eudragits, whereas the PLGA and PCL macromolecules, interacting by low polar carbonyl groups (with dipole moment mu = 2.7 D) retain more extended conformation in MC. This explains why the characteristic viscosities [eta] of MC solutions are much lower for the former polymers ( approximately 0.1 dL/g) with regard to PLGA and PCL solutions whose [eta] is equal to 0.3 and 0.6 dL/g, respectively. The ionization of TMA groups in contact with the water phase leads to the irreversible adsorption of Eudragits at the MC/water interface and to high decrease of the interfacial tension gamma (down to 4 mN/m for the 5% MC solutions). Whereas PLGA and PCL possessing low polar carbonyl groups adsorb poorly at the MC/water interface exhibiting gamma congruent with 28 mN/m. Higher stability of spread monolayers of Eudragits (pi* approximately 40 mN/m) with regard to PLGA and PCL (pi* < 20 mN/m) correlates well with higher interfacial activity of the former with regard to the later. The higher surface potential DeltaV of Eudragits (0.9 V) with regard to PLGA (0.3 V) and PCL (0.4V) is explained by the formation of electric double layer (DL) by the former, whereas the later contribute to the DeltaV only by cumulative dipole moments of carbonyl groups. The experimental values of surface potentials correlate well with the Gouy-Chapman model of the DL and the Helmholtz model of the monolayer. The ensemble of experimental results leads to the conclusion that higher emulsifying and stabilizing ability of Eudragits with regard to PLGA and PCL is due to higher adsorption activity of the former which form the corona of polymeric chains with ionized TMA groups around the droplets. It can be postulated that Eudragit polymers have good surface active properties which may allow manufacturing of biocompatible nanoparticles by emulsification-solvent evaporation method without surfactants.

Antitumor effect of cordycepin (3'-deoxyadenosine) on mouse melanoma and lung carcinoma cells involves adenosine A3 receptor stimulation.

PubMed

Nakamura, Kazuki; Yoshikawa, Noriko; Yamaguchi, Yu; Kagota, Satomi; Shinozuka, Kazumasa; Kunitomo, Masaru

2006-01-01

An attempt was made to elucidate the molecular targetfor the antitumor effects of cordycepin (3'-deoxyadenosine) using non-selective and selective adenosine A1, A2a, A2b and A3 receptor agonists and antagonists. Although adenosine and 2'-deoxyadenosine (up to 100 microM) had no effect, cordycepin showed remarkable inhibitory effects on the growth curves of B16-BL6 mouse melanoma (IC50= 39 microM) and mouse Lewis lung carcinoma (IC50 = 48 microM) cell lines in vitro. Among the adenosine receptor agonists and antagonists used (up to 100 microM), only 2-chloro-N6-(3-iodobenzyl)-adenosine-5'-N-methyluronamide (Cl-IB-MECA), a selective adenosine A3 receptor agonist, notably inhibited the growth of both mouse tumor cell lines (B16-BL6; IC50 = 5 microM, LLC; 14 microM). In addition, the tumor growth inhibitory effect of cordycepin was antagonized by 3-ethyl 5-benzyl 2-methyl-6-phenyl-4-phenylethynyl-1,4-(+/-)-dihydropyridine-3,5-dicarboxylate (MRS1191), a selective adenosine A3 receptor antagonist. These results suggest that cordycepin exerts inhibitory effects on the growth of mouse melanoma and lung carcinoma cells by stimulating adenosine A3 receptors on tumor cells.

Preparation and Characterization of PETI-330/Multiwalled Carbon Nanotube Composites

NASA Technical Reports Server (NTRS)

Ghose, Sayata; Watson, Kent A.; Working, Dennis C.; Delozier, Donavon M.; Criss, Jim M.; Siochi, Emilie J.; Connell, John W.

2005-01-01

As part of an ongoing effort to incorporate multi-functionality into advanced composites, blends of PETI-330 and multi-walled carbon nanotubes (MWCNTs) were prepared, characterized and fabricated into moldings. The PETI-330/MWCNT mixtures were prepared at concentrations ranging from 3 to 25 weight percent by dry mixing the components in a ball mill. The resulting powders were characterized for degree of mixing, thermal and rheological properties. Based on the characterization results, PETI-330/MWCNT samples were scaled up to approx. 300 g and used to fabricate moldings 10.2 cm x 15.2 cm x 0.32 cm thick. The moldings were fabricated by injecting the mixtures at 260-280 C into a stainless steel tool followed by curing for 1 h at 371 C. The tool was designed to impart high shear during the injection process in an attempt to achieve some alignment of the MWCNTs in the flow direction. Good quality moldings were obtained that were subsequently characterized for thermal, mechanical and electrical properties. The degree of dispersion and alignment of the MWCNTs were investigated using high-resolution scanning electron microscopy and Raman spectroscopy. The preparation and preliminary characterization of PETI-330/MWCNT composites will be discussed. Keywords: phenylethynyl terminated imides, high temperature polymers, nanocomposites,

Nanomicrointerface to read molecular potentials into current-voltage based electronics.

PubMed

Rangel, Norma L; Seminario, Jorge M

2008-03-21

Molecular potentials are unreadable and unaddressable by any present technology. It is known that the proper assembly of molecules can implement an entire numerical processing system based on digital or even analogical computation. In turn, the outputs of this molecular processing unit need to be amplified in order to be useful. We have developed a nanomicrointerface to read information encoded in molecular level potentials and to amplify this signal to microelectronic levels. The amplification is performed by making the output molecular potential slightly twist the torsional angle between two rings of a pyridazine, 3,6-bis(phenylethynyl) (aza-OPE) molecule, requiring only fractions of kcal/mol energies. In addition, even if the signal from the molecular potentials is not enough to turn the ring or even if the angles are the same for different combinations of outputs, still the current output yields results that resemble the device as a field effect transistor, providing the possibility to reduce channel lengths to the range of just 1 or 2 nm. The slight change in the torsional angle yields readable changes in the current through the aza-OPE biased by an external applied voltage. Using ab initio methods, we computationally demonstrate the amplification of molecular potential signals into currents that can be read by standard circuits.

PETI-298 Prepared by Microwave Synthesis: Neat Resin and Composite Properties

NASA Technical Reports Server (NTRS)

Smith, Joseph G.; Connell, John W.; Li, Chao-Jun; Wu, Wei; Criss, Jim M., Jr.

2004-01-01

PETI-298 is a high temperature/high performance matrix resin that is processable into composites by resin transfer molding (RTM), resin infusion and vacuum assisted RTM techniques. It is typically synthesized in a polar aprotic solvent from the reaction of an aromatic anhydride and a combination of diamines and endcapped with phenylethynylphthalic anhydride. Microwave synthesis of PETI-298 was investigated as a means to eliminate solvent and decrease reaction time. The monomers were manually mixed and placed in a microwave oven for various times to determine optimum reaction conditions. The synthetic process was subsequently scaled-up to 330g. Three batches were synthesized and combined to give 1 kg of material that was characterized for thermal and rheological properties and compared to PETI-298 prepared by the classic solution based synthetic method. The microwave synthesized PETI-298 was subsequently used to fabricate flat laminates on T650 carbon fabric by RTM. The composite panels were analyzed and mechanical properties determined and compared with those fabricated from PETI-298 prepared by the classic solution method. The microwave synthesis process and characterization of neat resin and carbon fiber reinforced composites fabricated by RTM will be presented. KEY WORDS: Resin Transfer Molding, High Temperature Polymers, Phenylethynyl Terminated Imides, Microwave Synthesis

Processing and Properties of Fiber Reinforced Polymeric Matrix Composites. Part 2; Processing Robustness of IM7/PETI Polyimide Composites

NASA Technical Reports Server (NTRS)

Hou, Tan-Hung

1996-01-01

The processability of a phenylethynyl terminated imide (PETI) resin matrix composite was investigated. Unidirectional prepregs were made by coating an N-methylpyrrolidone solution of the amide acid oligomer onto unsized IM7. Two batches of prepregs were used: one was made by NASA in-house, and the other was from an industrial source. The composite processing robustness was investigated with respect to the effect of B-staging conditions, the prepreg shelf life, and the optimal processing window. Rheological measurements indicated that PETI's processability was only slightly affected over a wide range of B-staging temperatures (from 250 C to 300 C). The open hole compression (OHC) strength values were statistically indistinguishable among specimens consolidated using various B-staging conditions. Prepreg rheology and OHC strengths were also found not to be affected by prolonged (i.e., up to 60 days) ambient storage. An optimal processing window was established using response surface methodology. It was found that IM7/PETI composite is more sensitive to the consolidation temperature than to the consolidation pressure. A good consolidation was achievable at 371 C/100 Psi, which yielded an OHC strength of 62 Ksi at room temperature. However, processability declined dramatically at temperatures below 350 C.

Repeated Impact Method and Devices to Simulate the Impact Fatigue Property of Drillstring

NASA Astrophysics Data System (ADS)

Lin, Y. H.; Li, B.; Pan, J.; Li, Q.; Liu, W. Y.; Pan, Y.

2017-05-01

It is well known that drillstring failures are a pendent problem in drilling engineering, because of the fatigue accumulation caused by the low amplitude-repeated impact. In order to reveal the effect of low amplitude-repeated impact on the failure mechanism of the drillstring, a repeated impact method and instrument have been developed based on the Charpy impact method, by which a series of tests have been performed in the condition of non-corrosive medium and with H2S environment respective. Test results of non-corrosive medium environment indicates that, with the increase of single impact energy, the low amplitude-repeated impact resistance of drillstring decreases significantly; For H2S corrosion environment, the low amplitude-repeated impact resistances with H2S is much lower than that without H2S corrosion, and high strength material such as V-150 drillstring is more sensitive to H2S corrosion media. Furthermore, based on the experiment data, the accumulation fatigue model to predict the service life of the drillstring is developed, which could be used to predict the fatigue life. Research fruits are very vital to select a suitable rotational speed for drilling job and drillstring design.

Impacte des maladies immunitaires sur la grossesse expérience du Service de Gynécologie Obstétrique de l'hôpital Militaire Moulay Ismail

PubMed Central

Laghzaoui, Omar

2016-01-01

L'influence du statut hormonal au cours des maladies auto-immunes est clairement établie, avec une prévalence maximale pendant la période d'activité génitale d'où l'intérêt de notre étude rétrospective de 32 dossiers de patientes enceintes présentant des pathologies auto-immunes. Les rechutes de la maladie au cours de la grossesse sont surtout observées chez les gestantes présentant le Lupus érythémateux disséminé et la maladie de Behçet alors qu'en poste partum les complications sont observées en cas de polyarthrite rhumatoïde, sclérose en plaque et la sclérodermie. Les complications fœtales dépendent du stade et du type de la maladie auto immune ainsi que l'association à d'autres pathologies. La prise en charge multi disciplinaire et l'ajustement du traitement abouti à stabiliser la maladie auto immune et améliore le pronostique fœtale. PMID:27648118

Enhancement of Localized Surface Plasmon Resonance polymer based biosensor chips using well-defined glycopolymers for lectin detection.

PubMed

Jin, Yan; Wong, Kok Hou; Granville, Anthony Michael

2016-01-15

Poly(methyl methacrylate) polymer based Localized Surface Plasmon Resonance biosensor chips were successfully fabricated using glycopolymer brushes carrying glucose moieties for the detection of concanavalin A. Poly(pentafluorostyrene), with pre-determined polymer chain lengths, were synthesized via a reversible addition-fragmentation chain transfer polymerization technique. The synthesized poly(pentafluorostyrene), was subsequently converted into glycopolymers via a para-fluoro-thiol "click" reaction and grafted onto the surface of sensor chips. The "glycocluster effect" induced by pendent carbohydrate moieties enabled a stronger affinity for concanavalin A binding, which resulted in a dramatic expansion of the sensors' response range. It was discovered that the longer polymer brushes did not guarantee additional enhancements for the sensor chips. Instead, they could lead to higher detection limits. In this study, the limit of detection for the sensor chips was discovered to be 1.3nmolL(-1) with a saturated response at 1054.2nmolL(-1). In addition to the superior performance, the capabilities of the reported sensor chips can be easily manipulated to detect a diverse range of analytes by "clicking" various sensing elements onto the polymer brushes. Copyright © 2015 Elsevier Inc. All rights reserved.

Using Dynamic Covalent Chemistry To Drive Morphological Transitions: Controlled Release of Encapsulated Nanoparticles from Block Copolymer Vesicles

PubMed Central

2017-01-01

Dynamic covalent chemistry is exploited to drive morphological order–order transitions to achieve the controlled release of a model payload (e.g., silica nanoparticles) encapsulated within block copolymer vesicles. More specifically, poly(glycerol monomethacrylate)–poly(2-hydroxypropyl methacrylate) (PGMA–PHPMA) diblock copolymer vesicles were prepared via aqueous polymerization-induced self-assembly in either the presence or absence of silica nanoparticles. Addition of 3-aminophenylboronic acid (APBA) to such vesicles results in specific binding of this reagent to some of the pendent cis-diol groups on the hydrophilic PGMA chains to form phenylboronate ester bonds in mildly alkaline aqueous solution (pH ∼ 10). This leads to a subtle increase in the effective volume fraction of this stabilizer block, which in turn causes a reduction in the packing parameter and hence induces a vesicle-to-worm (or vesicle-to-sphere) morphological transition. The evolution in copolymer morphology (and the associated sol–gel transitions) was monitored using dynamic light scattering, transmission electron microscopy, oscillatory rheology, and small-angle X-ray scattering. In contrast to the literature, in situ release of encapsulated silica nanoparticles is achieved via vesicle dissociation at room temperature; moreover, the rate of release can be fine-tuned by varying the solution pH and/or the APBA concentration. Furthermore, this strategy also works (i) for relatively thick-walled vesicles that do not normally exhibit stimulus-responsive behavior and (ii) in the presence of added salt. This novel molecular recognition strategy to trigger morphological transitions via dynamic covalent chemistry offers considerable scope for the design of new stimulus-responsive copolymer vesicles (and hydrogels) for targeted delivery and controlled release of cargoes. In particular, the conditions used in this new approach are relevant to liquid laundry formulations, whereby enzymes require protection to prevent their deactivation by bleach. PMID:28497960

Synthesis and characterization of novel polyacid-stabilized latexes.

PubMed

Yang, Pengcheng; Armes, S P

2012-09-18

A series of novel polyacid macromonomers based on 2-hydroxypropyl methacrylate (HPMA) were prepared by atom transfer radical polymerization (ATRP) via a two-step route. First, a range of well-defined PHPMA homopolymer precursors were synthesized by ATRP using a tertiary amine-functionalized initiator, 2-(dimethylamino)ethyl-2-bromoisobutyrylamide, and a CuCl/2, 2'-bipyridine (bpy) catalyst in alcoholic media at 50 °C. ATRP polymerizations were relatively slow and poorly controlled in pure isopropanol (IPA), especially when targeting higher degrees of polymerization (DP > 30). Improved control was achieved by addition of water: low polydispersity (M(w)/M(n) < 1.25) PHPMA homopolymers of DP = 30, 40, 50, 60, or 70 were successfully prepared using a 9:1 w/w % IPA/water mixture at 50 °C. These PHPMA homopolymer precursors were then derivatized to produce the corresponding poly(2-(succinyloxy)propyl methacrylate) (PSPMA) macromonomers by quaternizing the tertiary amine end-group with excess 4-vinylbenzyl chloride, followed by esterification of the pendent hydroxyl groups using excess succinic anhydride at 20 °C. These polyacid macromonomers were evaluated as reactive steric stabilizers for polystyrene latex synthesis under either aqueous emulsion polymerization or alcoholic dispersion polymerization conditions. Near-monodisperse polystyrene latexes were obtained via aqueous emulsion polymerization using 10 wt % PSPMA macromonomer (with respect to styrene monomer) with various initiators as evidenced by scanning electron microscopy, disk centrifuge photosedimentometry and light scattering studies. PSPMA macromomer concentrations as low as 1.0 wt % also produced near-monodisperse latexes, suggesting that these PSPMA macromonomers are highly effective stabilizers. Alcoholic dispersion polymerization of styrene conducted in various ethanol/water mixtures with 10 wt % PSPMA(50) macromonomer produced relatively large near-monodisperse latexes. Increasing the water content in such formulations led to smaller latexes, as expected. Control experiments conducted with 10 wt % PSPMA(50) homopolymer produced relatively large polydisperse latexes via emulsion polymerization and only macroscopic precipitates via alcoholic dispersion polymerization. Thus the terminal styrene group on the macromonomer chains is essential for the formation of well-defined latexes. FT-IR spectroscopy indicated that these latexes contained PSPMA macromonomer, whereas (1)H NMR spectroscopy studies of dissolved latexes allowed stabilizer contents to be determined. Aqueous electrophoresis and X-ray photoelectron spectroscopy studies confirmed that the PSPMA macromonomer chains were located at the latex surface, as expected. Finally, these polyacid-stabilized polystyrene latexes exhibited excellent freeze-thaw stability and remained colloidally stable in the presence of electrolyte.

Light emitting diode excitation emission matrix fluorescence spectroscopy.

PubMed

Hart, Sean J; JiJi, Renée D

2002-12-01

An excitation emission matrix (EEM) fluorescence instrument has been developed using a linear array of light emitting diodes (LED). The wavelengths covered extend from the upper UV through the visible spectrum: 370-640 nm. Using an LED array to excite fluorescence emission at multiple excitation wavelengths is a low-cost alternative to an expensive high power lamp and imaging spectrograph. The LED-EEM system is a departure from other EEM spectroscopy systems in that LEDs often have broad excitation ranges which may overlap with neighboring channels. The LED array can be considered a hybrid between a spectroscopic and sensor system, as the broad LED excitation range produces a partially selective optical measurement. The instrument has been tested and characterized using fluorescent dyes: limits of detection (LOD) for 9,10-bis(phenylethynyl)-anthracene and rhodamine B were in the mid parts-per-trillion range; detection limits for the other compounds were in the low parts-per-billion range (< 5 ppb). The LED-EEMs were analyzed using parallel factor analysis (PARAFAC), which allowed the mathematical resolution of the individual contributions of the mono- and dianion fluorescein tautomers a priori. Correct identification and quantitation of six fluorescent dyes in two to six component mixtures (concentrations between 12.5 and 500 ppb) has been achieved with root mean squared errors of prediction (RMSEP) of less than 4.0 ppb for all components.

Processing and Characterization of PETI Composites Fabricated by High Temperature VARTM

NASA Technical Reports Server (NTRS)

Ghose, Sayata; Cano, Roberto J.; Watson, Kent A.; Britton, Sean M.; Jensen, Brian J.; Connell, John W.; Smith, Joseph G.; Loos, Alfred C.; Heider, Dirk

2011-01-01

The use of composites as primary structures on aerospace vehicles has increased dramatically over the past decade. As these advanced structures increase in size and complexity, their production costs have grown significantly. A major contributor to these manufacturing costs is the requirement of elevated processing pressures, during the thermal cure, to create fully consolidated composites. For certain composite parts, high temperature vacuum assisted resin transfer molding (HT-VARTM) can offer reduced fabrication costs compared to conventional autoclave techniques. The process has been successfully used with phenylethynyl terminated imide (PETI) resins developed by NASA LaRC. In the current study, two PETI resins, LARC(TradeMark) PETI-330 and LARC(TradeMark) PETI-8 have been used to make test specimens using HT-VARTM. Based on previous work at NASA LaRC, larger panels with a quasi-isotropic lay-up were fabricated. The resultant composite specimens exhibited void contents <3% by volume depending on the type of carbon fabric preform used. Mechanical properties of the panels were determined at both room and elevated temperatures. These included open-hole compressive (OHC) and short beam shear (SBS) properties. Limited process modeling efforts were carried out including infusion times, composite panel size limitations and fabric permeability characterization. Work has also been carried out to develop new PETI based resins specifically geared towards HT-VARTM. The results of this work are presented herein.

NASA Tech Briefs, June 2005

NASA Technical Reports Server (NTRS)

2005-01-01

Topics covered include: Apparatus Characterizes Transient Voltages in Real Time; Measuring Humidity in Sealed Glass Encasements; Adaptable System for Vehicle Health and Usage Monitoring; Miniature Focusing Time-of-Flight Mass Spectrometer; Cryogenic High-Sensitivity Magnetometer; Wheel Electrometer System; Carbon-Nanotube Conductive Layers for Thin-Film Solar Cells; Patch Antenna Fed via Unequal-Crossed-Arm Aperture; LC Circuits for Diagnosing Embedded Piezoelectric Devices; Nanowire Thermoelectric Devices; Code for Analyzing and Designing Spacecraft Power System Radiators; Decision Support for Emergency Operations Centers; NASA Records Database; Real-Time Principal- Component Analysis; Fuzzy/Neural Software Estimates Costs of Rocket- Engine Tests; Multicomponent, Rare-Earth-Doped Thermal-Barrier Coatings; Reactive Additives for Phenylethynyl-Containing Resins; Improved Gear Shapes for Face Worm Gear Drives; Alternative Way of Shifting Mass to Move a Spherical Robot; Parylene C as a Sacrificial Material for Microfabrication; In Situ Electrochemical Deposition of Microscopic Wires; Improved Method of Manufacturing SiC Devices; Microwave Treatment of Prostate Cancer and Hyperplasia; Ferroelectric Devices Emit Charged Particles and Radiation; Dusty-Plasma Particle Accelerator; Frozen-Plug Technique for Liquid-Oxygen Plumbing; Shock Waves in a Bose-Einstein Condensate; Progress on a Multichannel, Dual-Mixer Stability Analyzer; Development of Carbon- Nanotube/Polymer Composites; Thermal Imaging of Earth for Accurate Pointing of Deep-Space Antennas; Modifications of a Composite-Material Combustion Chamber; Modeling and Diagnostic Software for Liquefying- Fuel Rockets; and Spacecraft Antenna Clusters for High EIRP.

Controlled Growth of Large-Area Aligned Single-Crystalline Organic Nanoribbon Arrays for Transistors and Light-Emitting Diodes Driving

NASA Astrophysics Data System (ADS)

Wang, Wei; Wang, Liang; Dai, Gaole; Deng, Wei; Zhang, Xiujuan; Jie, Jiansheng; Zhang, Xiaohong

2017-10-01

Organic field-effect transistors (OFETs) based on organic micro-/nanocrystals have been widely reported with charge carrier mobility exceeding 1.0 cm2 V-1 s-1, demonstrating great potential for high-performance, low-cost organic electronic applications. However, fabrication of large-area organic micro-/nanocrystal arrays with consistent crystal growth direction has posed a significant technical challenge. Here, we describe a solution-processed dip-coating technique to grow large-area, aligned 9,10-bis(phenylethynyl) anthracene (BPEA) and 6,13-bis(triisopropylsilylethynyl) pentacene (TIPS-PEN) single-crystalline nanoribbon arrays. The method is scalable to a 5 × 10 cm2 wafer substrate, with around 60% of the wafer surface covered by aligned crystals. The quality of crystals can be easily controlled by tuning the dip-coating speed. Furthermore, OFETs based on well-aligned BPEA and TIPS-PEN single-crystalline nanoribbons were constructed. By optimizing channel lengths and using appropriate metallic electrodes, the BPEA and TIPS-PEN-based OFETs showed hole mobility exceeding 2.0 cm2 V-1 s-1 (average mobility 1.2 cm2 V-1 s-1) and 3.0 cm2 V-1 s-1 (average mobility 2.0 cm2 V-1 s-1), respectively. They both have a high on/off ratio ( I on/ I off) > 109. The performance can well satisfy the requirements for light-emitting diodes driving.

Synthesis and preliminary biological evaluation of 3-[(18)F]fluoro-5-(2-pyridinylethynyl)benzonitrile as a PET radiotracer for imaging metabotropic glutamate receptor subtype 5.

PubMed

Wang, Ji-Quan; Tueckmantel, Werner; Zhu, Aijun; Pellegrino, Daniela; Brownell, Anna-Liisa

2007-12-01

The metabotropic glutamate receptor subtype 5 (mGluR5) has been reported to be implicated in various neurological disorders in the central nervous system. To investigate physiological and pathological functions of mGluR5, noninvasive imaging in a living body with PET technology and an mGluR5-specific radiotracer is urgently needed. Here, we report the synthesis of 3-[(18)F]fluoro-5-(2-pyridinylethynyl)benzonitrile ([(18)F]FPEB) through a convenient thermal reaction as a highly specific PET radiotracer for mGluR5. The precursor and standard compounds were prepared by a coupling reaction catalyzed by palladium. Radiosynthesis of [(18)F]FPEB was performed using nitro as a leaving group replaced by [(18)F]fluoride under conventional heating condition. Biodistribution, metabolite, and microPET studies were performed using Sprague-Dawley rats. Upto 30 mCi of [(18)F]FPEB was obtained with a radiochemical yield of 5% and a specific activity of 1900 +/- 200 mCi/mumol at the end of syntheses. Biodistribution showed rapid clearance from the blood pool and fast and steady accumulation of radioactivity into the brain. Metabolite studies indicated that only 22% of [(18)F]FPEB remained in the blood system 10 min after administration, and that a metabolite existed which was much more polar than the parent tracer. MicroPET studies demonstrated that [(18)F]FPEB accumulated specifically in mGluR5-rich regions of the brain such as striatum and hippocampus, and that blockade with 2-methyl-6-(2-phenylethynyl)pyridine (MPEP) and 3-[(2-methyl-1,3-thiazol-4-yl)ethynyl]pyridine (MTEP) substantially reduced the activity uptake in these regions. Selectivity was investigated by blockage with 6-amino-N-cyclohexyl-N,3-dimethylthiazolo[3,2-a]benzimidazole-2-caroxamide (YM-298198), a specific antagonist for mGluR1. [(18)F]FPEB was prepared conveniently and showed high specificity and selectivity toward mGluR5. It possesses the potential to be used in human studies to evaluate mGluR5 functions in various neurological disorders. (c) 2007 Wiley-Liss, Inc.

Glutamate spillover modulates GABAergic synaptic transmission in the rat midbrain periaqueductal grey via metabotropic glutamate receptors and endocannabinoid signaling.

PubMed

Drew, Geoffrey M; Mitchell, Vanessa A; Vaughan, Christopher W

2008-01-23

Glutamate spillover regulates GABAergic synaptic transmission at several CNS synapses via presynaptic ionotropic and metabotropic glutamate receptors (mGluRs). We have previously demonstrated that activation of group I-III mGluRs inhibits GABAergic transmission in the midbrain periaqueductal gray (PAG), a region involved in organizing behavioral responses to threat, stress, and pain. Here, we examined the role of glutamate spillover in the modulation of GABAergic transmission in the PAG. Using whole-cell recordings from rat PAG slices, we found that evoked IPSCs were reduced by the nonspecific glutamate transport blockers DL-threo-beta-benzyloxyaspartic acid (TBOA) and L-trans-pyrrolidine-2,4-dicarboxylic acid, but not by the glial GLT1-specific blocker dihydrokainate. In contrast, TBOA had no effect on evoked IPSCs when glutamate uptake into the postsynaptic neuron was selectively impaired. TBOA increased the paired-pulse ratio of evoked IPSCs and reduced the rate but not the amplitude of spontaneous miniature IPSCs. The effect of TBOA on evoked IPSCs was abolished by the broad-spectrum mGluR antagonist (2S)-2-amino-2-[(1S,2S)-2-carboxycycloprop-1-yl]-3-(xanth-9-yl) propanoic acid (100 microM), reduced by the mGluR5-specific antagonist 2-methyl-6-(phenylethynyl)pyridine hydrochloride (MPEP) and mimicked by the mGluR1/5 agonist (RS)-3,5-dihydroxyphenylglycine (DHPG). Furthermore, the effects of both TBOA and DHPG were reduced by the cannabinoid CB1 receptor antagonist 1-(2,4-dichlorophenyl)-5-(4-iodophenyl)-4-methyl-N-1-piperidinyl-1H-pyrazole-3-carboxamide (AM251). Finally, although MPEP and AM251 had no effect on single evoked IPSCs, they increased evoked IPSCs during repetitive stimulation. These results indicate that neuronal glutamate transporters limit mGluR5 activation and endocannabinoid signaling, but may be overwhelmed during conditions of elevated glutamate release. Thus, neuronal glutamate transporters play a key role in regulating endocannabinoid-mediated cross talk between glutamatergic and GABAergic synapses within the PAG.

Hippocampal protein kinase D1 is necessary for DHPG-induced learning and memory impairments in rats

PubMed Central

Groveman, Bradley R.; Carrier, Nicole; Qiao, Haifa; Fang, Xiao-Qian; Wang, Hui; Xin, Wenkuan; Jiang, Xing-Hong; Salter, Michael W.; Ding, Xin-Sheng; Kabbaj, Mohamed

2018-01-01

Background Understanding molecular mechanisms underlying the induction of learning and memory impairments remains a challenge. Recent investigations have shown that the activation of group I mGluRs (mGluR1 and mGluR5) in cultured hippocampal neurons by application of (S)-3,5-Dihydroxyphenylglycine (DHPG) causes the regulated internalization of N-methyl-D-aspartate receptors (NMDARs), which subsequently activates protein kinase D1 (PKD1). Through phosphorylating the C-terminals of the NMDAR GluN2 subunits, PKD1 down-regulates the activity of remaining (non-internalized) surface NMDARs. The knockdown of PKD1 does not affect the DHPG-induced inhibition of AMPA receptor-mediated miniature excitatory post-synaptic currents (mEPSCs) but prevents the DHPG-induced inhibition of NMDAR-mediated mEPSCs in vitro. Thus, we investigated the in vivo effects of bilateral infusions of DHPG into the hippocampal CA1 area of rats in the Morris water maze (MWM) and the novel object discrimination (NOD) tests. Methods A total of 300 adult male Sprague Dawley rats (250–280 g) were used for behavioral tests. One hundred ninety four were used in MWM test and the other 106 rats in the NOD test. Following one week of habituation to the vivarium, rats were bilaterally implanted under deep anesthesia with cannulas aimed at the CA1 area of the hippocampus (CA1 coordinates in mm from Bregma: AP -3.14; lateral +/-2; DV -3.0). Through implanted cannulas artificial cerebrospinal fluid (ACSF), the group1 mGluR antagonist 6-Methyl-2-(phenylethynyl)pyridine (MPEP), the dynamin-dependent internalization inhibitor Dynasore, or the PKD1 inhibitor CID755673 were infused into the bilateral hippocampal CA1 areas (2 μL per side, over 5 min). The effects of these infusions and the effects of PKD1 knockdown were examined in MWM or NOD test. Results DHPG infusion increased the latency to reach the platform in the MWM test and reduced the preference for the novel object in the NOD task. We found that the DHPG effects were dose-dependent and could be maintained for up to 2 days. Notably, these effects could be prevented by pre-infusion of the group1 mGluR antagonist MPEP, the dynamin-dependent internalization inhibitor Dynasore, the PKD1 inhibitor CID755673, or by PKD1 knockdown in the hippocampal CA1 area. Conclusion Altogether, these findings provide direct evidence that PKD1-mediated signaling may play a critical role in the induction of learning and memory impairments by DHPG infusion into the hippocampal CA1 area. PMID:29614089

ZmNST3 and ZmNST4 are master switches for secondary wall deposition in maize (Zea mays L.).

PubMed

Xiao, Wenhan; Yang, Yue; Yu, Jingjuan

2018-01-01

Secondary walls are the most abundant biomass produced by plants, and they consist mainly of lignin, cellulose and hemicellulose. Understanding how secondary wall biosynthesis is regulated could potentially provide genetic tools for engineering biomass components, especially in maize and Sorghum bicolor. Although many works have focused on secondary wall biosynthesis in dicotyledons, little has been reported for these monocotyledons. In this study, we cloned two NAC transcriptional factor genes, ZmNST3 and ZmNST4, and analyzed their functions in maize secondary wall formation process. ZmNST3 and ZmNST4 were expressed specifically in secondary wall-forming cells, expression of ZmNST3/4 can restore the pendent phenotype of Arabidopsis nst1nst3 double mutant. ZmNST3/4-overexpressing Arabidopsis and maize displayed a thickened secondary wall in the stem, and knockdown maize showed defective secondary wall deposition. ZmNST3/4 could regulate the expression of ZmMYB109/128/149. Our results revealed that ZmNST3/4 are master switches of the maize secondary wall biosynthesis process and provides new evidence that the secondary wall regulatory pathway is conserved in different plant species. Copyright © 2017. Published by Elsevier B.V.

Three-Dimensional Polypeptide Architectures Through Tandem Catalysis and Click Chemistry

NASA Astrophysics Data System (ADS)

Rhodes, Allison Jane

Rapid renal clearance, liver accumulation, proteolytic degradation and non-specificity are challenges small molecule drugs, peptides, proteins and nucleic acid therapeutics encounter en route to their intended destination within the body. Nanocarriers (i.e. dendritric polymers, vesicles, and micelles) of approximately 100 nm in diameter, shuttle small molecule drugs to their desired location through passive (EPR effect) and active (ligand-mediated) targeting, maximizing therapeutic efficiency. Polypeptide-based polymers are water-soluble, biocompatible, non-toxic and are therefore excellent candidates for nanocarriers. Dendritic polymers, including dendrimers, cylindrical brushes, and star polymers, are the newest class of nanomedicine drug delivery vehicles. The synthesis and characterization of dendritic polymers is challenging, with tedious and costly procedures. Dendritic polymers possess peripheral pendent functional groups that can potentially be used in ligand-mediated drug delivery vehicles and bioimaging applications. More specifically, cylindrical brushes are dendritic polymers where a single linear polymer (primary chain) has polymer chains (secondary chains) grafted to it. Recently, research groups have shown that cylindrical brush polymers are capable of nanoparticle and supramolecular structure self-assembly. The facile preparation of high-density brush copolypeptides by the "grafting from" approach will be discussed. This approach utilizes a novel, tandem catalytic methodology where alloc-alpha-aminoamide groups are installed within the side-chains of the alpha-amino-N-carboxyanhydride (NCA) monomer serving as masked initiators. These groups are inert during cobalt initiated NCA polymerization, and give alloc-alpha-aminoamide substituted polypeptide main-chains. The alloc-alpha-aminoamide groups are activated in situ using nickel to generate initiators for growth of side-chain brush segments. This method proves to be efficient, yielding well-defined, high-density brushes for applications in drug delivery and imaging. Here, we also report a method for the synthesis of soluble, well-defined, azido functionalized polypeptides in a straightforward, 3-step synthesis. Homo and diblock azidopolypeptides were prepared with controlled segment lengths via living polymerization using Co(PMe3)4 initiator. Through copper azide alkyne click chemistry (CuAAC) in organic solvent, azidopolypeptides were regioselectively and quantitatively modified with carboxylic acid (pH-responsive), amino acid and sugar functional groups. Finally, the advances towards well-defined hyperbranched polypeptides through alpha-amino-acid-N-thiocarboxyanhydrides (NTAs) will be discussed. Within the past 10 years, controlled NCA (alpha-amino acid-N-carboxyanhydride) ring-opening polymerization (ROP) has emerged, expanding the application of copolypeptide polymers in various drug delivery and tissue engineering motifs. Modification of NCA monomers to the corresponding alpha-amino-acid-N-thiocarboxyanhydride (NTA) will diversify ROP reactions, leading to more complex polypeptides (such as hyperbranched polymers), in addition to the possibility of performing these polymerizations under ambient conditions, which would greatly expand their potential utility. The project focuses on the preparation of hyperbranched polypeptides with well-defined architectures and controlled branching density in a one-pot reaction. This will be accomplished by taking advantage of the different selectivities of Co(PMe3)4 and depeNi(COD) polymerization initiators, and by exploiting the reactivity difference between NCA and the more stable NTA monomers.

High Temperature Transfer Molding Resins: Status of PETI-298 and PETI-330

NASA Technical Reports Server (NTRS)

Connell, John W.; Smith, Joseph G., Jr.; Hergenrother, Paul M.; Criss, Jim M.

2003-01-01

Two phenylethynyl terminated oligomers designated PETI-298 and PETI-330 were developed at the NASA Langley Research Center and have emerged as leading candidates for composite applications requiring high temperature performance (i.e. greater than or equal to 288 C for 1000 hours) combined with the ability to be readily processed into composites without the use of an autoclave or complex/lengthy cure or post-cure cycle. These high performance/high temperature composites are potentially useful on advanced aerospace vehicles in structural applications and as aircraft engine components such as inlet frames and compressor vanes. The number designation (i.e. 298, 330) refers to the glass transition temperature in degrees Celsius as determined on neat resin cured for 1 hour at 371 C. The resins are processable by non-autoclave techniques such as resin transfer molding (RTM), vacuum assisted RTM (VARTM) and resin infusion (RI). Both resins exhibit low complex melt viscosities (0.1-10 poise) at 280 C and are stable for greater than or equal to 2 hours at this temperature. Typically, the resins are melted, de-gassed and infused or injected at 280 C and subsequently cured at 371 C for 1-2 hours. Virtually no volatiles are evolved during the cure process. The resin synthesis is straightforward and has been scaled-up to 25 kg batches. The chemistry of PETI-298 and PETI-330 and the RTM AS-4 and T-650 carbon fabric laminate properties, and those of BMI-5270 for comparison, are presented.

Pharmacological modulation of metabotropic glutamate receptor subtype 5 and 7 impairs extinction of social fear in a time-point-dependent manner.

PubMed

Slattery, David A; Neumann, Inga D; Flor, Peter J; Zoicas, Iulia

2017-06-15

Pharmacological modulation of metabotropic glutamate receptor subtype 5 (mGluR5) and 7 (mGluR7) was shown to attenuate the acquisition and to facilitate the extinction of cued and contextual, non-social, fear. Using the allosteric mGluR5 antagonist 2-methyl-6-(phenylethynyl)-pyridine (MPEP) and the allosteric mGluR7 agonist N,N'-dibenzyhydryl-ethane-1,2-diamine dihydrochloride (AMN082), we aimed to study how pharmacological blockade of mGluR5 and activation of mGluR7 influence acquisition and extinction of social fear in mice. We could show that when administered before social fear conditioning, neither MPEP nor AMN082 affected acquisition and extinction of social fear, suggesting that mGluR5 inactivation and mGluR7 activation do not alter social fear. However, when administered before social fear extinction, both MPEP and AMN082 impaired social fear extinction and extinction recall. These findings suggest that mGluR5 inactivation and mGluR7 activation are unlikely to prevent the formation of traumatic social memories. Furthermore, medication strategies aimed at augmenting exposure-based therapies for psychiatric disorders associated with social deficits via modulation of mGluR5 and mGluR7 must be pursued cautiously because of their potential to delay social fear extinction processes. Copyright © 2017 Elsevier B.V. All rights reserved.

A double signal amplification platform for ultrasensitive and simultaneous detection of ascorbic acid, dopamine, uric acid and acetaminophen based on a nanocomposite of ferrocene thiolate stabilized Fe₃O₄@Au nanoparticles with graphene sheet.

PubMed

Liu, Meiling; Chen, Qiong; Lai, Cailang; Zhang, Youyu; Deng, Jianhui; Li, Haitao; Yao, Shouzhuo

2013-10-15

A double signal amplification platform for ultrasensitive and simultaneous detection of ascorbic acid (AA), dopamine (DA), uric acid (UA) and acetaminophen (AC) was fabricated by a nanocomposite of ferrocene thiolate stabilized Fe₃O₄@Au nanoparticles with graphene sheet. The platform was constructed by coating a newly synthesized phenylethynyl ferrocene thiolate (Fc-SAc) modified Fe₃O₄@Au NPs coupling with graphene sheet/chitosan (GS-chitosan) on a glassy carbon electrode (GCE) surface. The Fe₃O₄@Au-S-Fc/GS-chitosan modified GCE exhibits a synergistic catalytic and amplification effect toward AA, DA, UA and AC oxidation. The oxidation peak currents of the four compounds on the electrode were linearly dependent on AA, DA, UA and AC concentrations in the ranges of 4-400 μM, 0.5-50 μM, 1-300 μM and 0.3-250 μM in the individual detection of each component, respectively. By simultaneously changing the concentrations of AA, DA, UA and AC, their electrochemical oxidation peaks appeared at -0.03, 0.15, 0.24 and 0.35 V, and good linear current responses were obtained in the concentration ranges of 6-350, 0.5-50, 1-90 and 0.4-32 μM with the detection limits of 1, 0.1, 0.2 and 0.05 μM (S/N=3), respectively. Copyright © 2013 Elsevier B.V. All rights reserved.

Electronic regioselectivity of diarylalkynes in cobalt-mediated Pauson-Khand reaction: an experimental and computational study with para- and meta-substituted diarylalkynes and norbornene.

PubMed

Fager-Jokela, Erika; Muuronen, Mikko; Patzschke, Michael; Helaja, Juho

2012-10-19

Both steric and electronic factors of substituted alkynes are known to guide α/β-cyclopentenone regioselectivity in the cobalt-mediated Pauson-Khand reaction (PKR). In synthetic applications of the PKR, the steric factors can often override or render possible electronic effects. This study examined alkyne-dependent electronic regioselectivity of cyclopentenone formation in PKR with norbornene and sterically equivalent, but electronically unsymmetrical, meta- and para-substituted diarylethynyls to unveil the role of electronic effects alone. In agreement with the literature reports, EDG para-substituted aryls, to some extent, favored the cyclopentenone α-regioisomer, while the EWG-substituted aryls correspondingly preferred the β-regioisomer. The cooperation of EGW and EDG in diaryl-substituted alkynes did not lead to any increased regioselectivities that could be expected by a "push-pull" effect. Both EWG and EDG meta-substituted aryls preferred the β-regioisomer, which was demonstrated by 3,5-dimethoxy- and 3,5-bis(trifluoromethyl)-1-phenylethynyls that yielded 1/1.6 and 1/2.0 α/β-regioselectivities, respectively. Theoretically, inspection of Hammett values of α-alkyne carbons gave qualitatively satisfactory prediction for para-substituted aryls but correlated only weakly with meta-substituted effects. Computational investigations at the DFT level revealed a correlation between NBO charges and the regioselectivity. Overall, the results suggest that the polarity of an alkyne, also designated by the relative polarization of aryl α-carbons, dictates the regioselectivity in the absence of steric effects.

Study on stimulus-responsive cellulose-based polymeric materials

NASA Astrophysics Data System (ADS)

Luo, Hongsheng

Stimulus-responsive cellulose-based polymeric materials were developed by physical and chemical approaches. The thermal, structural, mechanical and morphological properties of the samples were comprehensively investigated by multiple tools. Shape memory effect (SME), programming-structure-property relationship and underling mechanisms were emphasized in this study. Some new concepts, such as heterogeneous-twin-switch, path-dependent multi-shape, rapidly switchable water-sensitive SME were established. The samples were divided into two categories. For the first category, cellulose nano-whiskers (CNWs) were incorporated into crystalline shape memory polyurethane (SMPU) and thermal plastic polyurethane (TPU). The CNW-SMPU nano-composites had heterogeneous switches. Triple- and multi-shape effects were achieved for the CNW-SMPU nano-composites by applying into appropriate thermal-aqueous-mechanical programming. Furthermore, the thermally triggered shape recovery of the composites was found to be tuneable, depending on the PCN content. Theoretical prediction along with numerical analysis was conducted, providing evidence on the possible microstructure of the CNW-SMPU nano-composites. Rapidly switchable water-sensitive SME of the CNW-TPU nano-composites was unprecedentedly studied, which originated from the reversible regulation of hydrogen bonding by water. The samples in the second category consisted of cellulose-polyurethane (PU) blends, cellulose-poly(acrylic acid) (PAA) composites and modified cellulose with supramolecular switches, featuring the requirement of homogeneous cellulose solution in the synthesis process. The reversible behaviours of the cellulose-PU blends in wet-dry cycles as well as the underlying shape memory mechanism were characterized and disclosed. The micro-patterns of the blends were found to be self-similar in fractal dimensions. Cellulose-PAA semi-interpenetrating networks exhibited mechanical adaptability in wet-dry cycles. A type of thermally reversible quadruple hydrogen bonding units, ureidopyrimidinone (UPy), reacted with the cellulose as pendent side-groups, which may impart the modified cellulose with thermal sensitivity. It is the first attempt to explore the natural cellulose as smart polymeric materials systematically and comprehensively. The concepts originally created in the study provided new viewpoints and routes for the development of novel shape memory polymers. The findings significantly benefits extension of the potential application of the cellulose in smart polymeric materials field.

A Versatile CuII Metal-Organic Framework Exhibiting High Gas Storage Capacity with Selectivity for CO2 : Conversion of CO2 to Cyclic Carbonate and Other Catalytic Abilities.

PubMed

De, Dinesh; Pal, Tapan K; Neogi, Subhadip; Senthilkumar, S; Das, Debasree; Gupta, Sayam Sen; Bharadwaj, Parimal K

2016-03-01

A linear tetracarboxylic acid ligand, H 4 L, with a pendent amine moiety solvothermally forms two isostructural metal-organic frameworks (MOFs) L M (M=Zn II , Cu II ). Framework L Cu can also be obtained from L Zn by post- synthetic metathesis without losing crystallinity. Compared with L Zn , the L Cu framework exhibits high thermal stability and allows removal of guest solvent and metal-bound water molecules to afford the highly porous, L Cu '. At 77 K, L Cu ' absorbs 2.57 wt % of H 2 at 1 bar, which increases significantly to 4.67 wt % at 36 bar. The framework absorbs substantially high amounts of methane (238.38 cm 3  g -1 , 17.03 wt %) at 303 K and 60 bar. The CH 4 absorption at 303 K gives a total volumetric capacity of 166 cm 3  (STP) cm -3 at 35 bar (223.25 cm 3  g -1 , 15.95 wt %). Interestingly, the NH 2 groups in the linker, which decorate the channel surface, allow a remarkable 39.0 wt % of CO 2 to be absorbed at 1 bar and 273 K, which comes within the dominion of the most famous MOFs for CO 2 absorption. Also, L Cu ' shows pronounced selectivity for CO 2 absorption over CH 4 , N 2 , and H 2 at 273 K. The absorbed CO 2 can be converted to value-added cyclic carbonates under relatively mild reaction conditions (20 bar, 120 °C). Finally, L Cu ' is found to be an excellent heterogeneous catalyst in regioselective 1,3-dipolar cycloaddition reactions ("click" reactions) and provides an efficient, economic route for the one-pot synthesis of structurally divergent propargylamines through three-component coupling of alkynes, amines, and aldehydes. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Archaeological Evaluation of The Multi-frequency Electromagnetic Slingram Device Gem 300

NASA Astrophysics Data System (ADS)

Schmidt, A.; Bonsall, J.

Frequency-domain electromagnetic devices offer a great potential in geophysical prospection as they allow the simultaneous measurement of two parameters. Con- ventionally, in-phase and quadrature components of the return-signal are recorded. However the identification of these measurements with ground properties such as con- ductance or magnetic susceptibility are complicated and depend on instrument design, frequency and other parameters, such as magnetic viscosity. While in environmental applications a simple identification of strongly conductive features (e.g. oil drums) can be obtained, archaeological surveys pose much greater challenges due to the smaller contrast in conductivity and magnetic susceptibility. A very detailed analysis of mea- sured data and sophisticated computations are therefore required. The new GEM 300 Slingram device allows to measure in-phase and quadrature data at up to 16 frequencies simultaneously which could be used to calculate three inde- pendent soil parameters: conductivity, magnetic susceptibility and magnetic viscosity. Alternatively, the manufacturer claims that the different frequencies can be used for depth soundings. The instrument was tested on a number of sites for which prior geophysical and ar- chaeological investigations had revealed distinct features (e.g. a brick-built cest pit). The results were disappointing as large drift and undefined offsets made a quantitative analysis of data nearly impossible. It was therefore concluded that further develop- ments of the instrument are required before it can be used successfully for archaeo- logical prospection.

A variational approach to the study of capillary phenomena

NASA Technical Reports Server (NTRS)

Emmer, M.; Gonzalez, E.; Tamanini, I.

1982-01-01

The problem of determining the free surface of a liquid in a capillary tube, and of a liquid drop, sitting first on a horizontal plane and then on more general surfaces is considered. With some modifications, the method applies to the study of pendent drops and of rotating drops as well. The standard capillary problem, i.e. the determination of the free surface of a liquid in a thin tube of general cross section, which resuls from the simultaneous action of surface tension, boundary adhesion and gravity is discussed. It turns out that in this case the existence of the solution surface depends heavily on the validity of a simple geometric condition about the mean curvature of the boundary curve of the cross section of the capillary tube. Some particular examples of physical interest are also be discussed. Liquid drops sitting on or hanging from a fixed horizontal plane are discussed. The symmetry of the solutions (which can actually be proved, as consequence of a general symmetrization argument) now plays the chief role in deriving both the existence and the regularity of energy-minimizing configurations. When symmetry fails (this is the case, for example, when the contact angle between the drop and the plate is not constant, or when the supporting surface is not itself symmetric), then more sophisticated methods must be used. Extensions in this direction are outlined.

Study of polycation effects on erythrocyte agglutination mediated by anti-glycophorins using microscopic image digital analysis

NASA Astrophysics Data System (ADS)

Riquelme, B.; Dumas, D.; Relancio, F.; Fontana, A.; Alessi, A.; Foresto, P.; Grandfils, C.; Stoltz, J.; Valverde, J.

2006-04-01

The aim of this work was to study synthetic polycation effects on erythrocyte agglutination mediated by anti-glycophorin using image digital analysis. Polycations are oligomers or polymers of natural or synthetic origin, which bear a great number of positive charges at pH 7.4. Several of these polycations are nowadays used in clinic for human and veterinary purposes. New applications of polycations to the development of new drug delivery systems are investigated, in order to promote the drug absorption through the gastro-intestinal and blood brain barriers. However, up to now, there are no clear relationships between macromolecular features of polycations (molecular weight, mean charge density, charge repartition, etc.) and their interactions with blood elements (which bear superficial negative charges). The interaction on the red blood cell membrane with synthetic polycations having well-controlled macromolecular features and functionalized with pendent polyethylene glycol segments was investigated. The alterations over stationary and dynamic viscoelastic properties of erythrocyte membranes were analyzed through laser diffractometry. Image digital analysis was used to study erythrocyte agglutination mediated by anti-glycophorin. Results show different reactivities of the polycations on the erythrocyte membrane. These findings could provide more information about the mechanisms of polycation interaction on erythrocyte membranes. We consider that this work could provide useful tools to understand and improve the haemocompatibility of polycations and enlarge their potential in clinic.

The minimal-ABC trees with B1-branches.

PubMed

Dimitrov, Darko; Du, Zhibin; Fonseca, Carlos M da

2018-01-01

The atom-bond connectivity index (or, for short, ABC index) is a molecular structure descriptor bridging chemistry to graph theory. It is probably the most studied topological index among all numerical parameters of a graph that characterize its topology. For a given graph G = (V, E), the ABC index of G is defined as [Formula: see text], where di denotes the degree of the vertex i, and ij is the edge incident to the vertices i and j. A combination of physicochemical and the ABC index properties are commonly used to foresee the bioactivity of different chemical composites. Additionally, the applicability of the ABC index in chemical thermodynamics and other areas of chemistry, such as in dendrimer nanostars, benzenoid systems, fluoranthene congeners, and phenylenes is well studied in the literature. While finding of the graphs with the greatest ABC-value is a straightforward assignment, the characterization of the tree(s) with minimal ABC index is a problem largely open and has recently given rise to numerous studies and conjectures. A B1-branch of a graph is a pendent path of order 2. In this paper, we provide an important step forward to the full characterization of these minimal trees. Namely, we show that a minimal-ABC tree contains neither 4 nor 3 B1-branches. The case when the number of B1-branches is 2 is also considered.

Fluorocarbon-based single-layer resist for 157-nm lithography

NASA Astrophysics Data System (ADS)

Song, Ki-Yong; Yoon, Kwang-Sub; Choi, Sang-Jun; Woo, Sang-Gyun; Han, Woo-Sung; Lee, Jae-Jun; Lee, Sang-Kyun; Noh, Chang-Ho; Honda, Kenji

2002-07-01

We have designed and synthesized a number of unique polymer systems composed of acrylate and styrene even though it had moderate transparency. Our first model of 157nm photoresist was based on a (alpha) trifluoromethylacrylate and styrene bearing a pendent hexafluoroisopropanol with pentafluoroisopropyl t-butyl carbonate (PFITBC) as the transparent enhancer and acid labile compound. PFITBC was obtained from perfluorinated enolate with di-t-butyl carbonate with high yield. All of the absorbance of our system ranged over 3.0~3.4micrometers -1 for base resin, which corresponded to a resist thickness of 110~125 nm at the optical density of 0.4. We have formulated several resists based on these polymers and these formulations have shown high resolution and contrast at 248 nm. We were able to obtain 240nm 1:1 image when exposed at 248 nm by a Nikon stepper with 0.45NA. To overcome the weak etch resistance with thin thickness film, we investigated the vapor phase silylation treatment (SILYAL) in which the treated pattern was more persistent against the O2 plasma and turned to smoother surface. DMSMDA with Bi(DMA)MS of 30-40 wt% showed not only good control resist flow but also the improvement of line-edge roughness. Our results suggested that a facile approach to fluorine incorporated resin with SILYAL process can accelerate the 157nm lithography.

Understanding channel and contact effects on transport in 1-dimensional nanotransistors.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Swartzentruber, Brian S.; Delker, Collin James; Yoo, Jinkyoung

Nanowire transistors are generally formed by metal contacts to a uniformly doped nanowire. The transistor can be modeled as a series combination of resistances from both the channel and the contacts. In this study, a simple model is proposed consisting of a resistive channel in series with two Schottky metal-semiconductor contacts modeled using the WKB approximation. This model captures several phenomena commonly observed in nanowire transistor measurements, including the mobility as a function of gate potential, mobility reduction with respect to bulk mobility, and non-linearities in output characteristics. For example, the maximum measured mobility as a function of gate voltagemore » in a nanowire transistor can be predicted based on the semiconductor bulk mobility in addition to barrier height and other properties of the contact. The model is then extended to nanowires with axial p-n junctions having an inde- pendent gate over each wire segment by splitting the channel resistance into a series component for each doping segment. Finally, the contact-channel model is applied to low-frequency noise analysis in nanowire devices, where the noise can be generated in both the channel and the contacts. Because contacts play a major, yet often neglected, role in nanowire transistor operation, they must be accounted for in order to extract meaningful parameters from I-V and noise measurements.« less

A novel method to determine the elastic modulus of extremely soft materials.

PubMed

Stirling, Tamás; Zrínyi, Miklós

2015-06-07

Determination of the elastic moduli of extremely soft materials that may deform under their own weight is a rather difficult experimental task. A new method has been elaborated by means of which the elastic modulus of such materials can be determined. This method is generally applicable to all soft materials with purely neo-Hookean elastic deformation behaviour with elastic moduli lower than 1 kPa. Our novel method utilises the self-deformation of pendent gel cylinders under gravity. When suspended, the material at the very top bears the weight of the entire gel cylinder, but that at the bottom carries no load at all. Due to the non-uniform stress distribution along the gel sample both the stress and the resulting strain show position dependence. The cross-sectional area of the material is lowest at the top of the sample and gradually increases towards its bottom. The equilibrium geometry of the pendant gel is used to evaluate the elastic modulus. Experimental data obtained by the proposed new method were compared to the results obtained from underwater measurements. The parameters affecting the measurement uncertainty were studied by a Pareto analysis of a series of adaptive Monte Carlo simulations. It has been shown that our method provides an easily achievable method to provide an accurate determination of the elastic modulus of extremely soft matter typically applicable for moduli below 1 kPa.

[Skin grafting in the treatment of hand burns sequelae in relation to 152 cases. Report from Department of Plastic Surgery, University Hospital Ibn Sina].

PubMed

El Mazouz, S; Fejjal, N; Hafidi, J; Cherkab, L; Mejjati, H; Belfqih, R; Gharib, N; Abbassi, A

2010-03-31

La main est fréquemment exposée aux brûlures, entraînant des séquelles esthétiques et fonctionnelles. Le traitement de ces séquelles est surtout chirurgical et consiste en la greffe de peau, dont le type dépend de la localisation de la brûlure et du type des séquelles. Dans ce travail rétrospectif, nous rapportons une série de 152 cas de brûlures des mains colligés au service de chirurgie plastique du Centre Hospitalier Universitaire Ibn-Sina de Rabat sur une période de dix ans, allant de 1998 à 2007. Les indications thérapeutiques dépendent du type de séquelles et de la localisation de la brûlure. En tout, 97 patients ont bénéficié d'une greffe cutanée, dont 76% par greffe de peau totale, 21% par greffe de peau demi-épaisse et 3% par peau fine. Les séquelles des brûlures des mains posent un problème thérapeutique majeur, malgré la diversité des procédés chirurgicaux, d'où l'intérêt de la prévention.

Contrôle cohérent de la dynamique de fragmentation d'agrégats alcalins

NASA Astrophysics Data System (ADS)

Lindinger, A.; Lupulescu, C.; Le Roux, J.; Bartelt, A.; Vajda, Š.; Wöste, L.

2004-11-01

Les agrégats métalliques présentent des propriétés extraordinaires, en particulier chimiques et catalytiques, qui dépendent fortement de leur taille. Ce comportement en fait des candidats idéaux pour l'analyse en temps réel de processus photo-induits ultrarapides, le but ultime étant la conduite de scénarios de contrôle cohérent. Nous avons réalisé des expériences d'ionisation multiphotonique non stationnaire sur de petits agrégats alcalins de différentes tailles et dans différents états électroniques rovibrationnels, y compris leur état fondamental, sondant ainsi leur dynamique ondulatoire, leur orientation structurelle, leur transfert de charge et leur dissociation. Les processus observés dépendent grandement des paramètres du faisceau laser d'excitation, tels que sa phase, son amplitude et sa durée ; cette sensibilité plaide pour l'emploi d'un système de contrôle rétroactif permettant de générer les formes d'impulsion optimales. Les caractéristiques spectrales et temporelles de ces dernières reflètent les propriétés du système étudié ainsi que les processus photochimiques que l'irradiation y induit. Nous présentons d'abord la dynamique vibrationelle d'états électroniques excités, liés, dissociatifs et prédissociatifs, des dimères et trimères alcalins. Suit une description du principe d'observation par pompage optique par effet Raman stimulé de la dynamique d'un paquet d'onde dans l'état électronique fondamental. Puisque les paramètres de l'impulsion d'excitation influencent de façon significative le poids des différentes trajectoires dans l'espace des phases, nous avons mené des expériences sur les canaux de fragmentation concurrents d'une réaction photo-induite, en étudiant les différents embranchements des voies d'ionisation et de fragmentation de Na{2}K excité électroniquement. L'utilisation d'un algorithme évolutif, pour l'optimisation de la phase et de l'amplitude de l'onde électromagnétique appliquée, permit d'influencer significativement la quantité résultante d'ions parents ou fragments. Des propriétés intéressantes sont déduites de la forme des impulsions laser optimales obtenues, qui révèlent la période de vibration moléculaire et qui, combinées aux courbes de potentiel, permettent de proposer les trajectoires que l'optimisation impose aux paquets d'onde. Pour finir, nous avons étudié comment une variété plus grande d'agrégats, en contribuant au canal de fragmentation NaK, influe sur la forme optimale d'impulsion. Là encore, la structure de cette dernière apporte des éclaircissements sur les canaux de fragmentation empruntés durant le processus de contrôle.

Metabotropic glutamate receptors 5 blockade reverses spatial memory deficits in a mouse model of Parkinson's disease.

PubMed

De Leonibus, Elvira; Managò, Francesca; Giordani, Francesco; Petrosino, Francesco; Lopez, Sebastien; Oliverio, Alberto; Amalric, Marianne; Mele, Andrea

2009-02-01

Visuo-spatial deficits are the most consistently reported cognitive abnormalities in Parkinson's disease (PD), and they are frequently associated to motor symptoms in the early stages of the disease when dopamine loss is moderate and still restricted to the caudate-putamen. The metabotropic glutamate receptor 5 (mGluR5) antagonist, 2-methyl-6-(phenylethynyl)-pyridine (MPEP), has beneficial effects on motor symptoms in animal models of PD. However, the effects of MPEP on the cognitive deficits of the disease have never been investigated. Thus, the purpose of this study was to explore its therapeutic potentials by investigating its effects on the visuo-spatial deficits induced by 6-hydroxydopamine (6-OHDA) lesions of dorsal striatum in CD1 mice. The results demonstrated that systemic injections of MPEP (6, 12, and 24 mg/kg, i.p.) impair visuo-spatial discrimination in intact mice at high concentrations, whereas lower doses (1.5 and 3 mg/kg, i.p.) were void of effects. Nevertheless, when an ineffective dose (MPEP 3 mg/kg) was injected, either acutely or subchronically (8 days), it antagonized the visuo-spatial discrimination deficit induced by bilateral dopamine lesion of the striatum. Furthermore, the same treatment increased contralateral turning induced by L-DOPA in mice bearing unilateral 6-OHDA lesion. These results confirm the therapeutic potential of mGluR5 blockade on motor symptoms induced by reduced striatal dopamine function. Further, they demonstrate that mGluR5 blockade may also have beneficial effects on cognitive deficits induced by dopamine depletion.

Functional Comparison of Neuronal Cells Differentiated from Human Induced Pluripotent Stem Cell-Derived Neural Stem Cells under Different Oxygen and Medium Conditions.

PubMed

Yamazaki, Kazuto; Fukushima, Kazuyuki; Sugawara, Michiko; Tabata, Yoshikuni; Imaizumi, Yoichi; Ishihara, Yasuharu; Ito, Masashi; Tsukahara, Kappei; Kohyama, Jun; Okano, Hideyuki

2016-12-01

Because neurons are difficult to obtain from humans, generating functional neurons from human induced pluripotent stem cells (hiPSCs) is important for establishing physiological or disease-relevant screening systems for drug discovery. To examine the culture conditions leading to efficient differentiation of functional neural cells, we investigated the effects of oxygen stress (2% or 20% O 2 ) and differentiation medium (DMEM/F12:Neurobasal-based [DN] or commercial [PhoenixSongs Biologicals; PS]) on the expression of genes related to neural differentiation, glutamate receptor function, and the formation of networks of neurons differentiated from hiPSCs (201B7) via long-term self-renewing neuroepithelial-like stem (lt-NES) cells. Expression of genes related to neural differentiation occurred more quickly in PS and/or 2% O 2 than in DN and/or 20% O 2 , resulting in high responsiveness of neural cells to glutamate, N-methyl-d-aspartate (NMDA), α-amino-3-hydroxy-5-methyl-4-isoxazolepropionate (AMPA), and ( S)-3,5-dihydroxyphenylglycine (an agonist for mGluR 1/5 ), as revealed by calcium imaging assays. NMDA receptors, AMPA receptors, mGluR 1 , and mGluR 5 were functionally validated by using the specific antagonists MK-801, NBQX, JNJ16259685, and 2-methyl-6-(phenylethynyl)-pyridine, respectively. Multielectrode array analysis showed that spontaneous firing occurred earlier in cells cultured in 2% O 2 than in 20% O 2 . Optimization of O 2 tension and culture medium for neural differentiation of hiPSCs can efficiently generate physiologically relevant cells for screening systems.

Intramolecular electron-transfer rates in mixed-valence triarylamines: measurement by variable-temperature ESR spectroscopy and comparison with optical data.

PubMed

Lancaster, Kelly; Odom, Susan A; Jones, Simon C; Thayumanavan, S; Marder, Seth R; Brédas, Jean-Luc; Coropceanu, Veaceslav; Barlow, Stephen

2009-02-11

The electron spin resonance spectra of the radical cations of 4,4'-bis[di(4-methoxyphenyl)amino]tolane, E-4,4'-bis[di(4-methoxyphenyl)amino]stilbene, and E,E-1,4-bis{4-[di(4-methoxyphenyl)amino]styryl}benzene in dichloromethane exhibit five lines over a wide temperature range due to equivalent coupling to two 14N nuclei, indicating either delocalization between both nitrogen atoms or rapid intramolecular electron transfer on the electron spin resonance time scale. In contrast, those of the radical cations of 1,4-bis{4-[di(4-methoxyphenyl)amino]phenylethynyl}benzene and E,E-1,4-bis{4-[di(4-n-butoxyphenyl)amino]styryl}-2,5-dicyanobenzene exhibit line shapes that vary strongly with temperature, displaying five lines at room temperature and only three lines at ca. 190 K, indicative of slow electron transfer on the electron spin resonance time scale at low temperatures. The rates of intramolecular electron transfer in the latter compounds were obtained by simulation of the electron spin resonance spectra and display an Arrhenius temperature dependence. The activation barriers obtained from Arrhenius plots are significantly less than anticipated from Hush analyses of the intervalence bands when the diabatic electron-transfer distance, R, is equated to the N[symbol: see text]N distance. Comparison of optical and electron spin resonance data suggests that R is in fact only ca. 40% of the N[symbol: see text]N distance, while the Arrhenius prefactor indicates that the electron transfer falls in the adiabatic regime.

Differential effects of MPEP and diazepam in tests of conditioned emotional response and Pavlovian-to-instrumental transfer suggests 'anxiolytic' effects are mediated by different mechanisms.

PubMed

George, S A; Hutson, P H; Stephens, D N

2009-06-01

The selective mGluR5 antagonist 2-methyl-6-(phenylethynyl)-pyridine (MPEP) is reported to be anxiolytic in several animal models of anxiety, including the conditioned emotional response (CER) paradigm. Suppression of responding during conditioned stimulus (CS) presentation in CER may reflect behavioural competition between lever pressing and adopting a shock-avoidance posture, or it may alternatively reflect altered value of the food reward following its association with a footshock, thus reducing its ability to motivate responding. If this is the case, then drugs that reduce the CER may interfere with the mechanism by which CSs are able to motivate responding, rather than by reducing anxiety. The standard test of the ability of Pavlovian cues to motivate responding is the Pavlovian-to-instrumental transfer (PIT) paradigm and it has recently been suggested that CER may be 'negative PIT'. We compared the effect of MPEP (0, 3, 10 and 30 mg/kg) and diazepam (0, 1, 3 and 10 mg/kg) in CER and PIT. Both MPEP and diazepam significantly reduced conditioned suppression in the CER paradigm. MPEP, but not diazepam, significantly reduced PIT. The findings support the hypothesis that MPEP may reduce expression of anxiety in the CER paradigm by interfering with the way in which emotionally salient cues are able to affect behaviour, but do not support such an analysis of the effect of diazepam. Diazepam and MPEP may therefore achieve their effects in CER by influencing different psychological processes.

High Temperature VARTM with LaRC Polyimides

NASA Technical Reports Server (NTRS)

Cano, Roberto J.; Grimsley, Brian W.; Jensen, Brian J.; Kellen, Charles B.

2004-01-01

Recent work at NASA Langley Research Center (LaRC) has concentrated on developing new polyimide resin systems for advanced aerospace applications that can be processed without the use of an autoclave. Polyimide composites are very attractive for applications that require a high strength to weight ratio and thermal stability. Vacuum assisted resin transfer molding (VARTM) has shown potential to reduce the manufacturing cost of composite structures. In VARTM, the fibrous preform is infiltrated on a rigid tool surface contained beneath a flexible vacuum bag. Both resin injection and fiber compaction are achieved under pressures of 101.3 KPa or less. Recent studies have demonstrated the feasibility of the VARTM process for fabrication of void free structures utilizing epoxy resin systems with fiber volume fractions approaching 60%. In this work, the VARTM process has been extended to the fabrication of composite panels from polyimide systems developed at the Langley Research Center. This work has focused on processing LARC(trademark) PETI-8 (Langley Research Center Phenylethynyl Terminated Imide- 8), an aromatic polyimide based on 3,3',4,4' -biphenyltetracarboxylic dianhydride, a 50:50 molar ratio of 3,4'-oxydianiline and 1,3-bis(3-aminophenoxy)benzene, with 4-phenylethynylphthalic anhydride as the endcapping agent. Various molecular weight versions were investigated to determine their feasibility of being processed by VARTM at elevated temperatures. An injection temperature of approximately 280 C was required to achieve the necessary viscosity (<5 Poise) for flow at VARTM pressures. Laminate quality and initial mechanical properties are presented for LARC(trademark) PETI-8 and 6k IM7 uniweave fabric.

Cosmological Symbolism in the Decorative Cycles of Mid-Byzantine Churches

NASA Astrophysics Data System (ADS)

Shrimplin, V.

2016-01-01

Fundamental links between theology and astronomy are widely reflected in the Judaeo-Christian tradition. From Genesis to Revelation, the great mysteries of the beginning and end of the universe, and the cycles of birth and death of individuals, are explained in terms of cosmological concepts. These are in turn reflected in art and architecture and nowhere more broadly, perhaps, than in Byzantine architecture and decoration. Following the Iconoclast prohibition of images in the Orthodox church (726-843), the mid-Byzantine period (843-1204) witnessed the primacy of the representation of the heavens in art and architecture. Reinforced by such writers as Cosmas Indicopleustes and Pseudo-Dionysius the Areopagite, not only were individual images reflective of the heavens (nativity and rebirth at the winter solstice, and rebirth/resurrection at the spring equinox) but entire cycles of church decoration were devised so as to reflect the ordering of God's universe. The architecture and decoration of the quintessential mid-Byzantine cross-in-square church was symbolic itself of the universe, as at Hosios Loukas and Daphni (eleventh century). From the location of the Pantocrator in the central celestial dome, to the descending zones of squinches and pendentives and the lowest earthly zones, decorative schemes are used to reflect the view of the sky/heavens above earth. Hierarchical systems depicting the life of Christ and ascending/descending ranks of saints and angels were rigorously adhered to, with Mary in the apse as bridge between heaven and earth.

Phenomenologie et caractérisation des supraconducteurs à haute T_c

NASA Astrophysics Data System (ADS)

Peyral, P.; Lebeau, C.; Rosenblatt, J.; Burin, J. P.; Raboutou, A.; Pena, Q.; Perrin, C.

1991-11-01

Transport properties of high T_c superconductors depend on the microscopic structure of the ideal material and on the mesoscopic characteristics of each sample. From an experimental point of view it is essential to separate their efrects. This can be done by describing quantitatively the resistive transition in zero field as a two-step process : a superconducting intragranular transition and an intergranular coherence transition. Well-known theories of critical fluctuations and Gaussian fluctuations allow us to obtain important characteristic parameters of the intragranular material such as the critical temperature, the normal resistivity and the width of the critical region. Les propriétés de transport des supraconducteurs dépendent à la fois de la structure microscopique du matériau idéal et des caractéristiques mésoscopiques (la granularité) de chaque échantillon. Du point de vue expérimental il est essentiel de pouvoir séparer leurs effet respectifs. Nous parvenons à cette séparation en décrivant quantitativement la transition résistive sous champ nul en deux étapes: supraconductrice intragranulaire et cohérente intergranulaire. Des théories connues des fluctuations critiques et gaussiennes nous permettent alors d'obtenir des paramètres importants pour la caractérisation du matériau intragranulaire, comme sa température critique, sa résistivité normale et la largeur de sa région critique.

Magruder Park Swamp

USGS Publications Warehouse

Hotchkiss, N.; Uhler, F.M.

1967-01-01

The last Tuesday in August, between five-thirty and seven in the evening, we zigzaged through this glorious jungle, attended by a family of Wood Pewees for whom we seemed to be stirring up a feast of flying insects. There was gentle background music by Mole Crickets. A few steps in from the playing field and we were out of sight in ten-foot-high Cattails. All through, we met -- as high as we, or higher--clumped Cinnamon Ferns, deep-rose Joe Pye Weed, and orange, pendent flowers of Jewelweed (first cousins to Balsam and Sultana). Here and there were soft, white spikes of Canadian Burnet, a rare plant hereabouts, and deep purple Ironweed. Dense-foliaged Hempweed climbed over bushes and up small trees, filling the air with its delicate fragrance. Arrowleaf Tear-thumb snatched at us with tiny prongs on its angled stems. Once in a while we tripped over huge sedge tussocks, half-hidden in the tangle. A few times we steered around a small bush of Poison Sumac. The next day We remembered seeing ninety kinds of plants on this hasty trip. Skunk Cabbage leaves recalled April, when a person, from the edge of the lawn, could see huge clumps of them all the way across the swamp. The sky had been washed by last week's downpours; scattered Gums were reddening; and Maples were getting ready for crimson beauty a month from now. There wasn't a mosquito! (Ed. Note.-The Hyattsville City Council is taking pains to preserve this interesting swamp.)

La Greffe de Peau dans le Traitement des Sequelles de la Main Brulee. A Propos de 152 Cas - Experience du Service de Chirurgie Plastique du Centre Hospitalier Universitaire Ibn-Sina, Rabat, Maroc

PubMed Central

El Mazouz, S.; Fejjal, N.; Hafidi, J.; Cherkab, L.; Mejjati, H.; Belfqih, R.; Gharib, N.; Abbassi, A.

2010-01-01

Summary La main est fréquemment exposée aux brûlures, entraînant des séquelles esthétiques et fonctionnelles. Le traitement de ces séquelles est surtout chirurgical et consiste en la greffe de peau, dont le type dépend de la localisation de la brûlure et du type des séquelles. Dans ce travail rétrospectif, nous rapportons une série de 152 cas de brûlures des mains colligés au service de chirurgie plastique du Centre Hospitalier Universitaire Ibn-Sina de Rabat sur une période de dix ans, allant de 1998 à 2007. Les indications thérapeutiques dépendent du type de séquelles et de la localisation de la brûlure. En tout, 97 patients ont bénéficié d'une greffe cutanée, dont 76% par greffe de peau totale, 21% par greffe de peau demi-épaisse et 3% par peau fine. Les séquelles des brûlures des mains posent un problème thérapeutique majeur, malgré la diversité des procédés chirurgicaux, d'où l'intérêt de la prévention. PMID:21991196

The 1:1 inclusion compounds zolmitriptan-benzene and zolmitriptan-phenol.

PubMed

Swamy, G Y S K; Sridhar, B; Ravikumar, K; Krishnan, Harihara

2007-07-01

In the benzene and phenol solvates of (S)-4-{3-[2-(dimethylamino)ethyl]-1H-indol-5-ylmethyl}oxazolidin-2-one, viz. C(16)H(21)N(3)O(2) x C(6)H(6), (I), and C(16)H(21)N(3)O(2) x C(6)H(5)OH, (II), the host molecule has three linked residues, namely a planar indole ring system, an ethylamine side chain and an oxazolidinone system. It has comparable features to that of sumatriptan, although the side-chain orientations of (I) and (II) differ from those of sumatriptan. Both (I) and (II) have host-guest-type structures. The host molecule in (I) and (II) has an L-shaped form, with the oxazolidinone ring occupying the base and the remainder of the molecule forming the upright section. In (I), each benzene guest molecule is surrounded by four host molecules, and these molecules are linked by a combination of N-H...N, N-H...O and C-H...O hydrogen bonds into chains of edge-fused R(4)(4)(33) rings. In (II), two independent molecules are present in the asymmetric unit, with similar conformations. The heterocyclic components are connected through N-H...N, N-H...O and C-H...O interactions to form chains of edge-fused R(6)(4)(38) rings, from which the phenol guest molecules are pendent, linked by O-H...O hydrogen bonds. The structures are further stabilized by extensive C-H...pi interactions.

Nuclear reactor sealing system

DOEpatents

McEdwards, James A.

1983-01-01

A liquid metal-cooled nuclear reactor sealing system. The nuclear reactor includes a vessel sealed at its upper end by a closure head. The closure head comprises at least two components, one of which is rotatable; and the two components define an annulus therebetween. The sealing system includes at least a first and second inflatable seal disposed in series in an upper portion of the annulus. The system further includes a dip seal extending into a body of insulation located adjacent a bottom portion of the closure head. The dip seal comprises a trough formed by a lower portion of one of the components, and a seal blade pendently supported from the other component and extending downwardly into the trough. A body of liquid metal is contained in the trough which submerges a portion of the seal blade. The seal blade is provided with at least one aperture located above the body of liquid metal for providing fluid communication between the annulus intermediate the dip seal and the inflatable seals, and a body of cover gas located inside the vessel. There also is provided means for introducing a purge gas into the annulus intermediate the inflatable seals and the seal blade. The purge gas is introduced in an amount sufficient to substantially reduce diffusion of radioactive cover gas or sodium vapor up to the inflatable seals. The purge gas mixes with the cover gas in the reactor vessel where it can be withdrawn from the vessel for treatment and recycle to the vessel.

Relationship, social support, and personality as psychosocial determinants of the risk for postpartum blues.

PubMed

Maliszewska, Karolina; Świątkowska-Freund, Małgorzata; Bidzan, Mariola; Preis, Krzysztof

2016-01-01

The purpose of the study was to identify factors increasing or decreasing the risk for postpartum blues. A total of 101 women in their first week postpartum were included in the study. The Edinburgh Postnatal Depression Scale, questions concerning their medical and social status, and psychological tests (the Personality Inventory NEO-FFI, The Mieczysław Plopa and Jan Rostowski Marriage Questionnaire, and the Berlin Social Support Scales) were used. The probability of postpartum blues was detected in 16.8% of the respondents. The risk decreased with higher satisfaction with intimacy (OR = 0.81), partner similarity (OR = 0.78), and the overall satisfaction with the relationship (OR = 0.94), while higher disappointment elevated that risk (OR = 1.12). As far as social support is concerned, further inde-pendent factors included perceived available social support (OR = 0.31), perceived instrumental social support (OR = 0.24), need for support (OR = 2.74), and protective buffering support (OR = 3.41). High level of neuroticism as well as fear of childbirth increased the risk for postpartum blues (OR = 2.17 and OR = 1.30, respectively). High level of extraversion and better quality of sleep constituted protective factors (OR = 0.74 and OR = 0.60, respectively). Maternal disappointment with marriage/relationship, neuroticism and introversion, poor quality of sleep, fear of childbirth, and seeking social support are among the factors signaling the need for careful observation for signs of possible postpartum mood disorders both, during hospitalization and the follow-up visits.

Differential effects of diazepam and MPEP on habituation and neuro-behavioural processes in inbred mice.

PubMed

Salomons, Amber R; Pinzon, Nathaly Espitia; Boleij, Hetty; Kirchhoff, Susanne; Arndt, Saskia S; Nordquist, Rebecca E; Lindemann, Lothar; Jaeschke, Georg; Spooren, Will; Ohl, Frauke

2012-06-11

Previous studies have demonstrated a profound lack of habituation in 129P3 mice compared to the habituating, but initially more anxious, BALB/c mice. The present study investigated whether this non-adaptive phenotype of 129P3 mice is primarily based on anxiety-related characteristics. To test this hypothesis and extend our knowledge on the behavioural profile of 129P3 mice, the effects of the anxiolyticdiazepam (1, 3 and 5 mg/kg) and the putative anxiolytic metabotropic glutamate receptor 5 (mGlu5R) antagonist 2-methyl-6-(phenylethynyl)pyridine (MPEP, 3, 10 and 30 mg/kg) treatment on within-trial (intrasession) habituation, object recognition (diazepam: 1 mg/kg; MPEP 10 mg/kg) and on the central-nervous expression of the immediate early gene c-Fos (diazepam: 1 mg/kg; MPEP 10 mg/kg) were investigated. Behavioural findings validated the initially high, but habituating phenotype of BALB/c mice, while 129P3 mice were characterized by impaired intrasession habituation. Diazepam had an anxiolytic effect in BALB/c mice, while in higher doses caused behavioural inactivity in 129P3 mice. MPEP revealed almost no anxiolytic effects on behaviour in both strains, but reduced stress-induced corticosterone responses only in 129P3 mice. These results were complemented by reduced expression of c-Fos after MPEP treatment in brain areas related to emotional processes, and increased c-Fos expression in higher integrating brain areas such as the prelimbic cortex compared to vehicle-treated 129P3 mice. These results suggest that the strain differences observed in (non)adaptive anxiety behaviour are at least in part mediated by differences in gamma-aminobutyric acid- A and mGluR5 mediated transmission.

Negative Allosteric Modulators of Metabotropic Glutamate Receptors Subtype 5 in Addiction: a Therapeutic Window

PubMed Central

2016-01-01

Background: Abundant evidence at the anatomical, electrophysiological, and molecular levels implicates metabotropic glutamate receptor subtype 5 (mGluR5) in addiction. Consistently, the effects of a wide range of doses of different mGluR5 negative allosteric modulators (NAMs) have been tested in various animal models of addiction. Here, these studies were subjected to a systematic review to find out if mGluR5 NAMs have a therapeutic potential that can be translated to the clinic. Methods: Literature on consumption/self-administration and reinstatement of drug seeking as outcomes of interest published up to April 2015 was retrieved via PubMed. The review focused on the effects of systemic (i.p., i.v., s.c.) administration of the mGluR5 NAMs 3-((2-Methyl-4-thiazolyl)ethynyl)pyridine (MTEP) and 2-Methyl-6-(phenylethynyl)pyridine (MPEP) on paradigms with cocaine, ethanol, nicotine, and food in rats. Results: MTEP and MPEP were found to reduce self-administration of cocaine, ethanol, and nicotine at doses ≥1mg/kg and 2.5mg/kg, respectively. Dose-response relationship resembled a sigmoidal curve, with low doses not reaching statistical significance and high doses reliably inhibiting self-administration of drugs of abuse. Importantly, self-administration of cocaine, ethanol, and nicotine, but not food, was reduced by MTEP and MPEP in the dose range of 1 to 2mg/kg and 2.5 to 3.2mg/kg, respectively. This dose range corresponds to approximately 50% to 80% mGluR5 occupancy. Interestingly, the limited data found in mice and monkeys showed a similar therapeutic window. Conclusion: Altogether, this review suggests a therapeutic window for mGluR5 NAMs that can be translated to the treatment of substance-related and addictive disorders. PMID:26802568

The mGluR5 antagonist MPEP elevates accumbal dopamine and glycine levels; interaction with strychnine-sensitive glycine receptors.

PubMed

Chau, PeiPei; Söderpalm, Bo; Ericson, Mia

2011-10-01

Studies have indicated that the metabotropic glutamate receptor 5 (mGluR5) antagonist 6-methyl-2-(phenylethynyl)-pyridine (MPEP) decreases ethanol self-administration, and the same receptor type was also suggested to be involved in the mechanism of action of the anti-craving substance acamprosate. Our previous research suggested that glycine receptors (GlyRs) in the nucleus accumbens (nAc) play a major part in mediating the dopamine-elevating properties of ethanol and are highly involved in the ethanol intake-reducing effect of acamprosate. The aim of this study was to examine if modulation of nAc dopamine via mGluR5 antagonism or GlyR agonism is a linked or separated phenomena. The extracellular levels of dopamine as well as of the GlyR ligands, glycine, taurine and β-alanine were measured in the nAc by means of microdialysis after local perfusion of MPEP (100 or 500 µM) with or without pre-treatment with strychnine. MPEP increased dopamine levels, an effect that was blocked by pre-treatment with strychnine. In addition, the higher MPEP concentration increased glycine output, whereas no alterations of taurine or β-alanine were observed. These results indicate a relationship between the glutamatergic and glycinergic transmitter systems in regulating dopamine output, possibly via alteration of extracellular glycine levels. Taken together with our previous data demonstrating the importance of accumbal GlyRs both in ethanol-induced elevation of nAc dopamine and in ethanol consumption, it is plausible that the effects of MPEP treatment, on dopamine output and on ethanol intake, may be mediated via interaction with the same neuronal circuitry that previously has been demonstrated for ethanol, taurine and acamprosate. © 2011 The Authors, Addiction Biology © 2011 Society for the Study of Addiction.

Endogenous hippocampal LTD that is enabled by spatial object recognition requires activation of NMDA receptors and the metabotropic glutamate receptor, mGlu5.

PubMed

Goh, Jinzhong Jeremy; Manahan-Vaughan, Denise

2013-02-01

Learning-facilitated synaptic plasticity describes the ability of hippocampal synapses to respond with persistent plasticity to afferent stimulation when coupled with a spatial learning event, whereby the afferent stimulation normally produces short-term plasticity or no change in synaptic strength if given in the absence of novel learning. Recently, it was reported that in the mouse hippocampus intrinsic long-term depression (LTD > 24 h) occurs when test-pulse afferent stimulation is coupled with a novel spatial learning. It is not known to what extent this phenomenon shares molecular properties with synaptic plasticity that is typically induced by means of patterned electrical afferent stimulation. In previous work, we showed that a novel spatial object recognition task facilitates LTD at the Schaffer collateral-CA1 synapse of freely behaving adult mice, whereas reexposure to the familiar spatial configuration ∼24 h later elicited no such facilitation. Here we report that treatment with the NMDA receptor antagonist, (±)-3-(2-Carboxypiperazin-4-yl)-propanephosphonic acid (CPP), or antagonism of metabotropic glutamate (mGlu) receptor, mGlu5, using 2-methyl-6-(phenylethynyl) pyridine (MPEP), completely prevented LTD under the novel learning conditions. Behavioral assessment during re-exposure after application of the antagonists revealed that the animals did not remember the object during novel exposure and treated them as if they were novel. Under these circumstances, where the acquisition of novel spatial information was involved, LTD was facilitated. Our data support that the endogenous LTD that is enabled through novel spatial learning in adult mice is critically dependent on the activation of both the NMDA receptors and mGlu5. Copyright © 2012 Wiley Periodicals, Inc.

Blockade of mGluR5 in the nucleus accumbens shell but not core attenuates heroin seeking behavior in rats

PubMed Central

Lou, Zhong-ze; Chen, Ling-hong; Liu, Hui-feng; Ruan, Lie-min; Zhou, Wen-hua

2014-01-01

Aim: Glutamatergic neurotransmission in the nucleus accumbens (NAc) is crucial for the relapse to heroin seeking. The aim of this study was to determine whether mGluR5 in the NAc core or shell involved in heroin seeking behavior in rats. Methods: Male SD rats were self-administered heroin under a fixed-ratio 1 (FR1) reinforcement schedule for 14 d, and subsequently withdrawn for 2 weeks. The selective mGluR5 antagonist 2-methyl-6-phenylethynyl-pyridine (MPEP, 5, 15 and 50 nmol per side) was then microinjected into the NAc core or shell 10 min before a heroin-seeking test induced by context, cues or heroin priming. Results: Microinjection of MPEP into the NAc shell dose-dependently decreased the heroin seeking induced by context, cues or heroin priming. In contrast, microinjection of MPEP into the NAc core did not alter the heroin seeking induced by cues or heroin priming. In addition, microinjection with MPEP (15 nmol per side) in the NAc shell reversed both the percentage of open arms entries (OE%) and the percentage of time spent in open arms (OT%) after heroin withdrawal. Microinjection of MPEP (50 nmol per side) in the striatum as a control location did not affect the heroin seeking behavior. Microinjection of MPEP in the 3 locations did not change the locomotion activities. Conclusion: Blockade of mGluR5 in NAc shell in rats specifically suppresses the relapse to heroin-seeking and anxiety-like behavior, suggesting that mGluR5 antagonists may be a potential candidate for the therapy of heroin addiction. PMID:25399651

A Novel Surface Treatment for Titanium Alloys

NASA Technical Reports Server (NTRS)

Lowther, S. E.; Park, C.; SaintClair, T. L.

2004-01-01

High-speed commercial aircraft require a surface treatment for titanium (Ti) alloy that is both environmentally safe and durable under the conditions of supersonic flight. A number of pretreatment procedures for Ti alloy requiring multi-stages have been developed to produce a stable surface. Among the stages are, degreasing, mechanical abrasion, chemical etching, and electrochemical anodizing. These treatments exhibit significant variations in their long-term stability, and the benefits of each step in these processes still remain unclear. In addition, chromium compounds are often used in many chemical treatments and these materials are detrimental to the environment. Recently, a chromium-free surface treatment for Ti alloy has been reported, though not designed for high temperature applications. In the present study, a simple surface treatment process developed at NASA/LaRC is reported, offering a high performance surface for a variety of applications. This novel surface treatment for Ti alloy is conventionally achieved by forming oxides on the surface with a two-step chemical process without mechanical abrasion. This acid-followed-by-base treatment was designed to be cost effective and relatively safe to use in a commercial application. In addition, it is chromium-free, and has been successfully used with a sol-gel coating to afford a strong adhesive bond after exposure to hot-wet environments. Phenylethynyl containing adhesives were used to evaluate this surface treatment with sol-gel solutions made of novel imide silanes developed at NASA/LaRC. Oxide layers developed by this process were controlled by immersion time and temperature and solution concentration. The morphology and chemical composition of the oxide layers were investigated using scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), and Auger electron spectroscopy (AES). Bond strengths made with this new treatment were evaluated using single lap shear tests.

Different effects of ionotropic and metabotropic glutamate receptor antagonists on attention and the attentional properties of nicotine.

PubMed

Quarta, Davide; Naylor, Christopher G; Morris, Hannah V; Patel, Swital; Genn, Rachel F; Stolerman, Ian P

2007-09-01

Distinct lines of evidence indicate that glutamate plays a primary role in modulating cognitive functions. Notably, competitive glutamate receptor antagonists acting at ionotropic N-methyl-d-aspartate (NMDA) or metabotropic glutamate 5 (mGlu5) receptors impair cognitive performance. Conversely, nicotine and other psychostimulants stimulate glutamatergic mechanisms and can act as cognitive enhancers. Hence we analysed the role of glutamate in performance of an attentional task and in nicotine-induced enhancement of attention by using the rodent five-choice serial reaction time task (5-CSRTT). Rats were trained to criterion performance and were then pre-dosed with either vehicle, the NMDA receptor antagonist (+)3-(2-carboxypiperazin-4-propyl)-1-propenyl-1-phosphonic acid (CPP, 0.3-2.0 mg/kg) or the mGlu5 antagonist 2-methyl-6-phenylethynyl-pyridine (MPEP, 1.0-9.0 mg/kg) and challenged with nicotine (0.2 mg/kg). Nicotine improved attentional performance, an effect that was weakened by doses of CPP that themselves had little impact on performance; importantly, CPP dose-dependently blunted the ability of nicotine to improve response accuracy, the major measure of signal detection in the paradigm. MPEP dose-dependently impaired signal detection under conditions with a high attentional load, an effect that was reversed by nicotine; thus, MPEP did not block nicotine-induced attentional enhancement. Co-administration of either CPP or MPEP with nicotine also produced a general slowing of performance characterised by increases in omission errors and response latencies and reduced anticipatory responding. It is concluded that activation of NMDA receptors may be an important determinant of the effects of nicotine in the 5-CSRTT. Stimulation of nicotinic receptors may also reverse attentional deficits associated with the impaired function of the glutamate network.

Capacities of metabotropic glutamate modulators in counteracting soman-induced seizures in rats.

PubMed

Myhrer, Trond; Mariussen, Espen; Enger, Siri; Aas, Pål

2013-10-15

Current treatment of nerve agent poisoning with ionotropic drugs proves inadequate, and alternative treatment strategies are searched for. Based on positive findings with metabotropic glutamate modulators in microinfusion studies, the present study was initiated to examine anticonvulsant effects of MPEP (2-Methyl-6-(phenylethynyl)pyridine hydrochloride), a metabotropic glutamate receptor 5 antagonist, and DCG-IV ((2S,2'R,3'R)-2-(2',3'-dicarboxycyclopropyl)glycine), a metabotropic glutamate receptor 2/3 agonist, when administered systemically in combinations with HI-6 (1-[([4-(aminocarbonyl)pyridino]methoxy)methyl]-2-[(hydroxyimino)methyl]pyridinium) and procyclidine or HI-6 and levetiracetam relative to the combination of HI-6, procyclidine, and levetiracetam. The results showed that MPEP or DCG-IV combined with HI-6 and procyclidine resulted in substantial antidotal efficacy when administered 20 min after onset of seizures elicited by soman. MPEP or DCG-IV combined with HI-6 and levetiracetam did not terminate seizures and preserve lives. When given 20 min before challenge with soman, DCG-IV in combination with HI-6 and procyclidine provided protection, whereas MPEP combined with HI-6 and procyclidine did not. Combinations with metabotropic glutamate receptor modulators did not achieve the same high level of antidotal efficacy as the combination of HI-6, procyclidine, and levetiracetam. MPEP alone inhibited pseudocholinesterase activity in the brain markedly. A positive correlation was found between latency to seizure onset or full protection and level of pseudocholinesterase activity in brain. MPEP and DCG-IV can serve as effective anticonvulsants against nerve agent poisoning when combined with HI-6 and procyclidine. Metabotropic glutamate receptor modulators may represent an alternative or supplement to treatment with ionotropic drugs. © 2013 Elsevier B.V. All rights reserved.

Changes in sensitivity of reward and motor behavior to dopaminergic, glutamatergic, and cholinergic drugs in a mouse model of fragile X syndrome.

PubMed

Fish, Eric W; Krouse, Michael C; Stringfield, Sierra J; Diberto, Jeffrey F; Robinson, J Elliott; Malanga, C J

2013-01-01

Fragile X syndrome (FXS) is a leading cause of intellectual disability. FXS is caused by loss of function of the FMR1 gene, and mice in which Fmr1 has been inactivated have been used extensively as a preclinical model for FXS. We investigated the behavioral pharmacology of drugs acting through dopaminergic, glutamatergic, and cholinergic systems in fragile X (Fmr1 (-/Y)) mice with intracranial self-stimulation (ICSS) and locomotor activity measurements. We also measured brain expression of tyrosine hydroxylase (TH), the rate-limiting enzyme in dopamine biosynthesis. Fmr1 (-/Y) mice were more sensitive than wild type mice to the rewarding effects of cocaine, but less sensitive to its locomotor stimulating effects. Anhedonic but not motor depressant effects of the atypical neuroleptic, aripiprazole, were reduced in Fmr1 (-/Y) mice. The mGluR5-selective antagonist, 6-methyl-2-(phenylethynyl)pyridine (MPEP), was more rewarding and the preferential M1 antagonist, trihexyphenidyl, was less rewarding in Fmr1 (-/Y) than wild type mice. Motor stimulation by MPEP was unchanged, but stimulation by trihexyphenidyl was markedly increased, in Fmr1 (-/Y) mice. Numbers of midbrain TH+ neurons in the ventral tegmental area were unchanged, but were lower in the substantia nigra of Fmr1 (-/Y) mice, although no changes in TH levels were found in their forebrain targets. The data are discussed in the context of known changes in the synaptic physiology and pharmacology of limbic motor systems in the Fmr1 (-/Y) mouse model. Preclinical findings suggest that drugs acting through multiple neurotransmitter systems may be necessary to fully address abnormal behaviors in individuals with FXS.

mGluR5 antagonist MPEP reduces ethanol-seeking and relapse behavior.

PubMed

Bäckström, Pia; Bachteler, Daniel; Koch, Sabrina; Hyytiä, Petri; Spanagel, Rainer

2004-05-01

The glutamatergic system plays an important role in mediating neurobehavioral effects of ethanol. Metabotropic glutamate receptors subtype 5 (mGluR5) are modulators of glutamatergic neurotransmission and are abundant in brain regions known to be involved in ethanol self-administration. Here, we studied the effects of 2-methyl-6-(phenylethynyl)-pyridine (MPEP), a highly potent, noncompetitive mGlu5 receptor antagonist, on voluntary ethanol consumption and relapse behavior. For this purpose, we used two models for the measurement of relapse behavior: (i) reinstatement of ethanol-seeking behavior by drug-associated cues and (ii) the alcohol deprivation effect in long-term ethanol-consuming rats. In the first set of experiments, rats were trained to lever press for ethanol in the presence of a distinct set of cues. After extinction, the animals were exposed to the respective cues that initiated reinstatement of responding. A response-contingent ethanol prime further enhanced responding compared to the conditioned cues alone. Under these conditions, MPEP (0, 1, 3, and 10 mg/kg) attenuated ethanol seeking significantly and in a dose-related manner. However, at the highest dose, MPEP also decreased the number of inactive lever responses. In the second set of experiments, rats with 1 year of ethanol experience and repeated deprivation phases were used. A subchronic treatment with MPEP (twice daily; 0, 3, and 10 mg/kg) resulted in a significant and dose-dependent reduction of the alcohol deprivation effect (ADE). Although the same MPEP treatment regimen decreased baseline drinking, this effect was not as pronounced as on the ADE. These results show in two commonly used models of relapse to ethanol that pharmacological targeting of mGlu5 receptors may be a promising approach for the treatment of alcoholism.

Parvalbumin Cell Ablation of NMDA-R1 Causes Increased Resting Network Excitability with Associated Social and Self-Care Deficits

PubMed Central

Billingslea, Eddie N; Tatard-Leitman, Valerie M; Anguiano, Jaynie; Jutzeler, Catherine R; Suh, Jimmy; Saunders, John A; Morita, Susumu; Featherstone, Robert E; Ortinski, Pavel I; Gandal, Michael J; Lin, Robert; Liang, Yuling; Gur, Raquel E; Carlson, Gregory C; Hahn, Chang-Gyu; Siegel, Steven J

2014-01-01

NMDA-receptor (NMDAR) hypofunction is strongly implicated in the pathophysiology of schizophrenia. Several convergent lines of evidence suggest that net excitation propagated by impaired NMDAR signaling on GABAergic interneurons may be of particular interest in mediating several aspects of schizophrenia. However, it is unclear which behavioral domains are governed by a net increase of excitation and whether modulating downstream GABAergic signaling can reverse neural and thus behavioral deficits. The current study determines the selective contributions of NMDAR dysfunction on PV-containing interneurons to electrophysiological, cognitive, and negative-symptom-related behavioral phenotypes of schizophrenia using mice with a PVcre-NR1flox-driven ablation of NR1 on PV-containing interneurons. In addition, we assessed the efficacy of one agent that directly modulates GABAergic signaling (baclofen) and one agent that indirectly modifies NMDAR-mediated signaling through antagonism of mGluR5 receptors (2-methyl-6-(phenylethynyl) pyridine (MPEP)). The data indicate that loss of NMDAR function on PV interneurons impairs self-care and sociability while increasing N1 latency and baseline gamma power, and reducing induction and maintenance of long-term potentiation. Baclofen normalized baseline gamma power without corresponding effects on behavior. MPEP further increased N1 latency and reduced social behavior in PVcre/NR1+/+ mice. These two indices were negatively correlated before and following MPEP such that as N1 latency increases, sociability decreases. This finding suggests a predictive role for N1 latency with respect to social function. Although previous data suggest that MPEP may be beneficial for core features of autism spectrum disorders, current data suggest that such effects require intact function of NMDAR on PV interneurons. PMID:24525709

Characterization and reversal of synaptic defects in the amygdala in a mouse model of fragile X syndrome.

PubMed

Suvrathan, Aparna; Hoeffer, Charles A; Wong, Helen; Klann, Eric; Chattarji, Sumantra

2010-06-22

Fragile X syndrome (FXS), a common inherited form of mental impairment and autism, is caused by transcriptional silencing of the fragile X mental retardation 1 (FMR1) gene. Earlier studies have identified a role for aberrant synaptic plasticity mediated by the metabotropic glutamate receptors (mGluRs) in FXS. However, many of these observations are derived primarily from studies in the hippocampus. The strong emotional symptoms of FXS, on the other hand, are likely to involve the amygdala. Unfortunately, little is known about how exactly FXS affects synaptic function in the amygdala. Here, using whole-cell recordings in brain slices from adult Fmr1 knockout mice, we find mGluR-dependent long-term potentiation to be impaired at thalamic inputs to principal neurons in the lateral amygdala. Consistent with this long-term potentiation deficit, surface expression of the AMPA receptor subunit, GluR1, is reduced in the lateral amygdala of knockout mice. In addition to these postsynaptic deficits, lower presynaptic release was manifested by a decrease in the frequency of spontaneous miniature excitatory postsynaptic currents (mEPSCs), increased paired-pulse ratio, and slower use-dependent block of NMDA receptor currents. Strikingly, pharmacological inactivation of mGluR5 with 2-methyl-6-phenylethynyl-pyridine (MPEP) fails to rescue either the deficit in long-term potentiation or surface GluR1. However, the same acute MPEP treatment reverses the decrease in mEPSC frequency, a finding of potential therapeutic relevance. Therefore, our results suggest that synaptic defects in the amygdala of knockout mice are still amenable to pharmacological interventions against mGluR5, albeit in a manner not envisioned in the original hippocampal framework.

Complex effects of mGluR5 antagonism on sociability and stereotypic behaviors in mice: possible implications for the pharmacotherapy of autism spectrum disorders.

PubMed

Burket, Jessica A; Herndon, Amy L; Winebarger, Erin E; Jacome, Luis F; Deutsch, Stephen I

2011-10-10

Balb/c mice display deficits of sociability; for example, they show reduced locomotor activity in the presence of an enclosed or freely-moving social stimulus mouse. Transgenic mice with defective or diminished expression of NMDA receptors manifest impaired sociability, while a partial and full agonist of the obligatory glycine co-agonist binding site on the NMDA receptor improved sociability in the Balb/c mouse strain. Because 2-methyl-6-(phenylethynyl)-pyridine (MPEP), an antagonist of the mGluR5 metabotropic glutamate receptor (mGluR), reduced self-grooming behavior in BTBR T+tfJ (BTBR) mice, another inbred genetic mouse model of autism spectrum disorders (ASDs), and mGluR5 antagonism is emerging as an experimental treatment for the 'fragile X syndrome," which has a high prevalence of co-morbid ASDs, we examined the effects of MPEP on sociability and stereotypic behaviors in Balb/c and Swiss Webster mice in a standard paradigm. MPEP had complex effects on sociability, impairing some measures of sociability in both strains, while it reduced the intensity of some spontaneous measures of stereotypic behaviors emerging during free social interaction in Swiss Webster mice. Conceivably, mGluR5 antagonism exacerbates diminished endogenous tone of NMDA receptor-mediated neurotransmission in neural circuits relevant to at least some measures of sociability in Balb/c mice; the mGluR5 receptor contributes to regulation of the phosphorylation status of the NMDA receptor. In any event, although stereotypies are an important therapeutic target in ASDs, medication strategies to attenuate their severity via antagonism of mGluR5 receptors must be pursued cautiously because of their potential to worsen at least some measures of sociability. Copyright © 2011 Elsevier Inc. All rights reserved.

Photophysical Properties of Pt(II) Polypyridines with Five- versus Six-Membered Chelate Rings: Trade-Offs in Angle Strain.

PubMed

Natoli, Sean N; Hight, Lauren M; Zeller, Matthias; McMillin, David R

2018-06-04

This report describes the synthesis and characterization of a series of eight [Pt(NNN)X] + complexes where the tridentate NNN ligand is (2,2'-bipyrid-6-yl)(pyrid-2-yl)sulfide (btp) or methyl(2,2'-bipyrid-6-yl)(pyrid-2-yl)amine (bmap) and X is OMe, Cl, phenylethynyl (C 2 Ph), or cyclohexylethynyl (C 2 Cy). The expectation was that inserting a heteroatom into the backbone of 2,2':6',2″-terpyridine (trpy) would expand the overall intraligand bite angle, introduce ILCT character into the excited states, and improve the photophysical properties. Crystal structures of [Pt(bmap)C 2 Ph] + and [Pt(btp)Cl] + reveal that atom insertion into the trpy backbone successfully expands the bite angle of the ligand by 8-10°. However, the impact on the photophysics is minimal. Indeed, of the eight systems investigated, only the [Pt(bmap)C 2 Ph] + and [Pt(btp)C 2 Ph] + complexes display appreciable emission in fluid solution, and they exhibit shorter emission lifetimes than [Pt(trpy)C 2 Ph] + . One reason is that the bond angle preferences of platinum and the inserted heteroatom induce the six-membered rings to deviate from planarity and adopt a boat-like conformation, impairing charge delocalization within the ligand. In addition, angle strain induces the donor atoms about platinum to assume a pseudotetrahedral arrangement, which offsets any benefit due to the increase in overall bite angle by promoting deactivation via d-d excited states. The results reveal that, in order to improve the luminescence of a [Pt(NNN)X] + system, one must take care to avoid trading one kind of angle strain for another.

DSR-98776, a novel selective mGlu5 receptor negative allosteric modulator with potent antidepressant and antimanic activity.

PubMed

Kato, Taro; Takata, Makoto; Kitaichi, Maiko; Kassai, Momoe; Inoue, Mitsuhiro; Ishikawa, Chihiro; Hirose, Wataru; Yoshida, Kozo; Shimizu, Isao

2015-06-15

Modulation of monoaminergic systems has been the main stream of treatment for patients with mood disorders. However, recent evidence suggests that the glutamatergic system plays an important role in the pathophysiology of these disorders. This study pharmacologically characterized a structurally novel metabotropic glutamate 5 (mGlu5) receptor negative allosteric modulator, DSR-98776, and evaluated its effect on rodent models of depression and mania. First, DSR-98776 in vitro profile was assessed using intracellular calcium and radioligand binding assays. This compound showed dose-dependent inhibitory activity for mGlu5 receptors by binding to the same allosteric site as 2-methyl-6-(phenylethynyl)-pyridine (MPEP), a known mGlu5 inhibitor. The in vivo therapeutic benefits of DSR-98776 were evaluated in common rodent models of depression and mania. In the rat forced swimming test, DSR-98776 (1-3mg/kg) significantly reduced rats immobility time after treatment for 7 consecutive days, while paroxetine (3 and 10mg/kg) required administration for 2 consecutive weeks to reduce rats immobility time. In the mouse forced swimming test, acute administration of DSR-98776 (10-30 mg/kg) significantly reduced immobility time. This effect was not influenced by 4-chloro-DL-phenylalanine methyl ester hydrochloride-induced 5-HT depletion. Finally, DSR-98776 (30 mg/kg) significantly decreased methamphetamine/chlordiazepoxide-induced hyperactivity in mice, which reflects this compound antimanic-like effect. These results indicate that DSR-98776 acts as an orally potent antidepressant and antimanic in rodent models and can be a promising therapeutic option for the treatment of a broad range of mood disorders with depressive and manic states. Copyright © 2015 Elsevier B.V. All rights reserved.

Repetitive Self-Grooming Behavior in the BTBR Mouse Model of Autism is Blocked by the mGluR5 Antagonist MPEP

PubMed Central

Silverman, Jill L; Tolu, Seda S; Barkan, Charlotte L; Crawley, Jacqueline N

2010-01-01

Autism is a neurodevelopmental disorder characterized by abnormal reciprocal social interactions, communication deficits, and repetitive behaviors with restricted interests. BTBR T+tf/J (BTBR) is an inbred mouse strain that shows robust behavioral phenotypes with analogies to all three of the diagnostic symptoms of autism, including well-replicated deficits in reciprocal social interactions and social approach, unusual patterns of ultrasonic vocalization, and high levels of repetitive self-grooming. These phenotypes offer straightforward behavioral assays for translational investigations of pharmacological compounds. Two suggested treatments for autism were evaluated in the BTBR mouse model. Methyl-6-phenylethynyl-pyridine (MPEP), an antagonist of the mGluR5 metabotropic glutamate receptor, blocks aberrant phenotypes in the Fmr1 mouse model of Fragile X, a comorbid neurodevelopmental disorder with autistic features. Risperidone has been approved by the United States Food and Drug Administration for the treatment of irritability, tantrums, and self-injurious behavior in autistic individuals. We evaluated the actions of MPEP and risperidone on two BTBR phenotypes, low sociability and high repetitive self-grooming. Open field activity served as an independent control for non-social exploratory activity and motor functions. C57BL/6J (B6), an inbred strain with high sociability and low self-grooming, served as the strain control. MPEP significantly reduced repetitive self-grooming in BTBR, at doses that had no sedating effects on open field activity. Risperidone reduced repetitive self-grooming in BTBR, but only at doses that induced sedation in both strains. No overall improvements in sociability were detected in BTBR after treatment with either MPEP or risperidone. Our findings suggest that antagonists of mGluR5 receptors may have selective therapeutic efficacy in treating repetitive behaviors in autism. PMID:20032969

Femtosecond fluorescence dynamics of porphyrin in solution and solid films: the effects of aggregation and interfacial electron transfer between porphyrin and TiO2.

PubMed

Luo, Liyang; Lo, Chen-Fu; Lin, Ching-Yao; Chang, I-Jy; Diau, Eric Wei-Guang

2006-01-12

The excited-state relaxation dynamics of a synthetic porphyrin, ZnCAPEBPP, in solution, coated on a glass substrate as solid films, mixed with PMMA and coated on a glass substrate as solid films, and sensitized on nanocrystalline TiO2 films were investigated by using femtosecond fluorescence up-conversion spectroscopy with excitation in the Soret band, S2. We found that the S2--> S1 electronic relaxation of ZnCAPEBPP in solution and on PMMA films occurs in 910 and 690 fs, respectively, but it becomes extremely rapid, <100 fs, in solid films and TiO2 films due to formation of porphyrin aggregates. When probed in the S1 state of porphyrin, the fluorescence transients of the solid films show a biphasic kinetic feature with the rapid and slow components decaying in 1.9-2.4 and 19-26 ps, respectively. The transients in ZnCAPEBPP/TiO2 films also feature two relaxation processes but they occur on different time scales, 100-300 fs and 0.8-4.1 ps, and contain a small offset. According to the variation of relaxation period as a function of molecular density on a TiO2 surface, we assigned the femtosecond component of the TiO2 films as due to indirect interfacial electron transfer through a phenylethynyl bridge attached to one of four meso positions of the porphyrin ring, and the picosecond component arising from intermolecular energy transfer among porphyrins. The observed variation of aggregate-induced relaxation periods between solid and TiO2 films is due mainly to aggregation of two types: J-type aggregation is dominant in the former case whereas H-type aggregation prevails in the latter case.

The Metabotropic Glutamate Receptor, mGlu5, Is Required for Extinction Learning That Occurs in the Absence of a Context Change

PubMed Central

André, Marion Agnes Emma; Güntürkün, Onur; Manahan-Vaughan, Denise

2015-01-01

The metabotropic glutamate (mGlu) receptors and, in particular, mGlu5 are crucially involved in multiple forms of synaptic plasticity that are believed to underlie explicit memory. MGlu5 is also required for information transfer through neuronal oscillations and for spatial memory. Furthermore, mGlu5 is involved in extinction of implicit forms of learning. This places this receptor in a unique position with regard to information encoding. Here, we explored the role of this receptor in context-dependent extinction learning under constant, or changed, contextual conditions. Animals were trained over 3 days to take a left turn under 25% reward probability in a T-maze with a distinct floor pattern (Context A). On Day 4, they experienced either a floor pattern change (Context B) or the same floor pattern (Context A) in the absence of reward. After acquisition of the task, the animals were returned to the maze once more on Day 5 (Context A, no reward). Treatment with the mGlu5 antagonist, 2-methyl-6-(phenylethynyl) pyridine, before maze exposure on Day 4 completely inhibited extinction learning in the AAA paradigm but had no effect in the ABA paradigm. A subsequent return to the original context (A, on Day 5) revealed successful extinction in the AAA paradigm, but impairment of extinction in the ABA paradigm. These data support that although extinction learning in a new context is unaffected by mGlu5 antagonism, extinction of the consolidated context is impaired. This suggests that mGlu5 is intrinsically involved in enabling learning that once-relevant information is no longer valid. © 2014 The Authors. Hippocampus Published by Wiley Periodicals, Inc. PMID:25160592

The metabotropic glutamate receptor, mGlu5, is required for extinction learning that occurs in the absence of a context change.

PubMed

André, Marion Agnes Emma; Güntürkün, Onur; Manahan-Vaughan, Denise

2015-02-01

The metabotropic glutamate (mGlu) receptors and, in particular, mGlu5 are crucially involved in multiple forms of synaptic plasticity that are believed to underlie explicit memory. MGlu5 is also required for information transfer through neuronal oscillations and for spatial memory. Furthermore, mGlu5 is involved in extinction of implicit forms of learning. This places this receptor in a unique position with regard to information encoding. Here, we explored the role of this receptor in context-dependent extinction learning under constant, or changed, contextual conditions. Animals were trained over 3 days to take a left turn under 25% reward probability in a T-maze with a distinct floor pattern (Context A). On Day 4, they experienced either a floor pattern change (Context B) or the same floor pattern (Context A) in the absence of reward. After acquisition of the task, the animals were returned to the maze once more on Day 5 (Context A, no reward). Treatment with the mGlu5 antagonist, 2-methyl-6-(phenylethynyl) pyridine, before maze exposure on Day 4 completely inhibited extinction learning in the AAA paradigm but had no effect in the ABA paradigm. A subsequent return to the original context (A, on Day 5) revealed successful extinction in the AAA paradigm, but impairment of extinction in the ABA paradigm. These data support that although extinction learning in a new context is unaffected by mGlu5 antagonism, extinction of the consolidated context is impaired. This suggests that mGlu5 is intrinsically involved in enabling learning that once-relevant information is no longer valid. © 2014 The Authors. Hippocampus Published by Wiley Periodicals, Inc.

Neutral polymer micelle carriers with pH-responsive, endosome-releasing activity modulate antigen trafficking to enhance CD8(+) T cell responses.

PubMed

Keller, Salka; Wilson, John T; Patilea, Gabriela I; Kern, Hanna B; Convertine, Anthony J; Stayton, Patrick S

2014-10-10

Synthetic subunit vaccines need to induce CD8(+) cytotoxic T cell (CTL) responses for effective vaccination against intracellular pathogens. Most subunit vaccines primarily generate humoral immune responses, with a weaker than desired CD8(+) cytotoxic T cell response. Here, a neutral, pH-responsive polymer micelle carrier that alters intracellular antigen trafficking was shown to enhance CD8(+) T cell responses with a correlated increase in cytosolic delivery and a decrease in exocytosis. Polymer diblock carriers consisted of a N-(2-hydroxypropyl) methacrylamide corona block with pendent pyridyl disulfide groups for reversible conjugation of thiolated ovalbumin, and a tercopolymer ampholytic core-forming block composed of propylacrylic acid (PAA), dimethylaminoethyl methacrylate (DMAEMA), and butyl methacrylate (BMA). The diblock copolymers self-assembled into 25-30nm diameter micellar nanoparticles. Conjugation of ovalbumin to the micelles significantly enhanced antigen cross-presentation in vitro relative to free ovalbumin, an unconjugated physical mixture of ovalbumin and polymer, and a non-pH-responsive micelle-ovalbumin control. Mechanistic studies in a murine dendritic cell line (DC 2.4) demonstrated micelle-mediated enhancements in intracellular antigen retention and cytosolic antigen accumulation. Approximately 90% of initially internalized ovalbumin-conjugated micelles were retained in cells after 1.5h, compared to only ~40% for controls. Furthermore, cells dosed with conjugates displayed 67-fold higher cytosolic antigen levels relative to soluble ovalbumin 4h post uptake. Subcutaneous immunization of mice with ovalbumin-polymer conjugates significantly enhanced antigen-specific CD8(+) T cell responses (0.4% IFN-γ(+) of CD8(+)) compared to immunization with soluble protein, ovalbumin and polymer mixture, and the control micelle without endosome-releasing activity. Additionally, pH-responsive carrier facilitated antigen delivery to antigen presenting cells in the draining lymph nodes. As early as 90min post injection, ova-micelle conjugates were associated with 28% and 55% of dendritic cells and macrophages, respectively. After 24h, conjugates preferentially associated with dendritic cells, affording 30-, 3-, and 3-fold enhancements in uptake relative to free protein, physical mixture, and the non-pH-responsive conjugate controls, respectively. These results demonstrate the potential of pH-responsive polymeric micelles for use in vaccine applications that rely on CD8(+) T cell activation. Copyright © 2014 Elsevier B.V. All rights reserved.

Eu(III) complexes as Anion-responsive Luminescent Sensors and PARACEST Agents

PubMed Central

Hammell, Jacob; Buttarazzi, Leandro; Huang, Ching-Hui; Morrow, Janet R.

2011-01-01

The Eu(III) complex of (1S,4S,7S,10S)-1,4,7,10-tetrakis(2-hydroxypropyl)-1,4,7,10-tetraazacyclododecane (S-THP) is studied as a sensor for biologically relevant anions. Anion interactions produce changes in the luminescence emission spectrum of the Eu(III) complex, in the 1H NMR spectrum, and correspondingly, in the PARACEST spectrum of the complex (PARACEST = paramagnetic chemical exchange saturation transfer). Direct excitation spectroscopy and luminescence lifetime studies of Eu(S-THP) give information about the speciation and nature of anion interactions including carbonate, acetate, lactate, citrate, phosphate and methylphosphate at pH 7.2. Data is consistent with the formation of both innersphere and outersphere complexes of Eu(S-THP) with acetate, lactate and carbonate. These anions have weak dissociation constants that range from 19–38 mM. Citrate binding to Eu(S-THP) is predominantly innersphere with a dissociation constant of 17 μM. Luminescence emission peak changes upon addition of anion to Eu(S-THP) show that there are two distinct binding events for phosphate and methylphosphate with dissociation constants of 0.3 mM and 3.0 mM for phosphate and 0.6 mM and 9.8 mM for methyl phosphate. Eu(THPC) contains an appended carbostyril derivative as an antenna to sensitize Eu(III) luminescence. Eu(THPC) binds phosphate and citrate with dissociation constants that are 10-fold less than that of the Eu(S-THP) parent, suggesting that functionalization through a pendent group disrupts the anion binding site. Eu(S-THP) functions as an anion responsive PARACEST agent through exchange of the alcohol protons with bulk water. The alcohol proton resonances of Eu(S-THP) shift downfield in the presence of acetate, lactate, citrate and methylphosphate, giving rise to distinct PARACEST peaks. In contrast, phosphate binds to Eu(S-THP) to suppress the PARACEST alcohol OH peak and carbonate does not markedly change the alcohol peak at 5 mM Eu(S-THP), 15 mM carbonate at pH 6.5 or 7.2. This work shows that the Eu(S-THP) complex has unique selectivity toward binding of biologically relevant anions and that anion binding results in changes in both the luminescence and PARACEST spectra of the complex. PMID:21548563

Eu(III) complexes as anion-responsive luminescent sensors and paramagnetic chemical exchange saturation transfer agents.

PubMed

Hammell, Jacob; Buttarazzi, Leandro; Huang, Ching-Hui; Morrow, Janet R

2011-06-06

The Eu(III) complex of (1S,4S,7S,10S)-1,4,7,10-tetrakis(2-hydroxypropyl)-1,4,7,10-tetraazacyclododecane (S-THP) is studied as a sensor for biologically relevant anions. Anion interactions produce changes in the luminescence emission spectrum of the Eu(III) complex, in the (1)H NMR spectrum, and correspondingly, in the PARACEST spectrum of the complex (PARACEST = paramagnetic chemical exchange saturation transfer). Direct excitation spectroscopy and luminescence lifetime studies of Eu(S-THP) give information about the speciation and nature of anion interactions including carbonate, acetate, lactate, citrate, phosphate, and methylphosphate at pH 7.2. Data is consistent with the formation of both innersphere and outersphere complexes of Eu(S-THP) with acetate, lactate, and carbonate. These anions have weak dissociation constants that range from 19 to 38 mM. Citrate binding to Eu(S-THP) is predominantly innersphere with a dissociation constant of 17 μM. Luminescence emission peak changes upon addition of anion to Eu(S-THP) show that there are two distinct binding events for phosphate and methylphosphate with dissociation constants of 0.3 mM and 3.0 mM for phosphate and 0.6 mM and 9.8 mM for methyl phosphate. Eu(THPC) contains an appended carbostyril derivative as an antenna to sensitize Eu(III) luminescence. Eu(THPC) binds phosphate and citrate with dissociation constants that are 10-fold less than that of the Eu(S-THP) parent, suggesting that functionalization through a pendent group disrupts the anion binding site. Eu(S-THP) functions as an anion responsive PARACEST agent through exchange of the alcohol protons with bulk water. The alcohol proton resonances of Eu(S-THP) shift downfield in the presence of acetate, lactate, citrate, and methylphosphate, giving rise to distinct PARACEST peaks. In contrast, phosphate binds to Eu(S-THP) to suppress the PARACEST alcohol OH peak and carbonate does not markedly change the alcohol peak at 5 mM Eu(S-THP), 15 mM carbonate at pH 6.5 or 7.2. This work shows that the Eu(S-THP) complex has unique selectivity toward binding of biologically relevant anions and that anion binding results in changes in both the luminescence and the PARACEST spectra of the complex. © 2011 American Chemical Society

Block copolymers for alkaline fuel cell membrane materials

NASA Astrophysics Data System (ADS)

Li, Yifan

Alkaline fuel cells (AFCs) using anion exchange membranes (AEMs) as electrolyte have recently received considerable attention. AFCs offer some advantages over proton exchange membrane fuel cells, including the potential of non-noble metal (e.g. nickel, silver) catalyst on the cathode, which can dramatically lower the fuel cell cost. The main drawback of traditional AFCs is the use of liquid electrolyte (e.g. aqueous potassium hydroxide), which can result in the formation of carbonate precipitates by reaction with carbon dioxide. AEMs with tethered cations can overcome the precipitates formed in traditional AFCs. Our current research focuses on developing different polymer systems (blend, block, grafted, and crosslinked polymers) in order to understand alkaline fuel cell membrane in many aspects and design optimized anion exchange membranes with better alkaline stability, mechanical integrity and ionic conductivity. A number of distinct materials have been produced and characterized. A polymer blend system comprised of poly(vinylbenzyl chloride)-b-polystyrene (PVBC-b-PS) diblock copolymer, prepared by nitroxide mediated polymerization (NMP), with poly(2,6-dimethyl-1,4-phenylene oxide) (PPO) or brominated PPO was studied for conversion into a blend membrane for AEM. The formation of a miscible blend matrix improved mechanical properties while maintaining high ionic conductivity through formation of phase separated ionic domains. Using anionic polymerization, a polyethylene based block copolymer was designed where the polyethylene-based block copolymer formed bicontinuous morphological structures to enhance the hydroxide conductivity (up to 94 mS/cm at 80 °C) while excellent mechanical properties (strain up to 205%) of the polyethylene block copolymer membrane was observed. A polymer system was designed and characterized with monomethoxy polyethylene glycol (mPEG) as a hydrophilic polymer grafted through substitution of pendent benzyl chloride groups of a PVBC-b-PS. The incorporation of the hydrophilic polymer allows for an investigation of the effect of hydration on ionic conductivity, resulting in the increase in membrane water affinity, enhancement of conductivity and reduced dependence of conductivity on relative humidity. A study of crosslinking of block copolymers was done wherein the crosslinking occurs in the non-matrix phase in order to maintain mechanical properties. The formation of a cationic crosslinked structure improves the mechanical integrity of the membrane in water while showing little deleterious effect on ionic conductivity and mechanical properties.

Are a Healthy Diet and Physical Activity Synergistically Associated with Cognitive Functioning in Older Adults?

PubMed

Nijholt, W; Jager-Wittenaar, H; Visser, M; van der Schans, C P; Hobbelen, J S M

2016-01-01

Previous research has demonstrated that being both physically active and adhering a healthy diet is associated with improved cognitive functioning; however, it remains unclear whether these factors act synergistically. We investigated the synergistic association of a healthy diet and being physically active with cognitive functioning. Cross-sectional study. Data from the Longitudinal Aging Study Amsterdam (LASA) were used. We analyzed data from 2,165 community dwelling adults who were aged 55-85 years, 56% of whom were female. Cognitive functioning was assessed by the Mini-Mental State Examination (MMSE), an MMSE score of >26 indicates good cognitive functioning. Physical activity was assessed by the LASA Physical Activity Questionnaire and was considered sufficient if the person engaged in moderately intense physical activity ≥ 20 min/day. A healthy diet score was based on the intake of fruit, vegetables and fish. Each of the food groups was assigned a score that ranged from 1 (well below the Dutch guideline for a healthy diet) to 4 (well above the Dutch guideline for a healthy diet), and the scores were aggregated to determine a healthy diet (healthy ≥ 9 points). Multiple logistic and linear regression analyses were used to examine the (synergistic) association among physical activity, a healthy diet and cognitive functioning. All analyses were adjusted for potential chronic diseases and lifestyle confounders. Of all of the participants, 25% were diagnosed with a cognitive impairment (MMSE ≤26), 80% were physically active and 41% had a healthy diet. Sixty three percent of the participants both adhered to a healthy diet and were physically active. Sufficient daily physical activity (OR=2.545 p<.001) and adherence to a healthy diet (OR=1.766 p=.002) were associated with good cognitive functioning. After adjusting for confounding factors, sufficient physical activity was not significantly related to cognitive functioning (p=.163); however adherence to a healthy diet remained significantly associated with good cognitive functioning (p=.017). No interaction among sufficient physical activity, healthy diet adherence and good cognitive functioning was observed (crude: p=.401, adjusted: p=.216). The results of this cross-sectional study indicate that adherence to a healthy diet is inde-pendently related to cognitive functioning. Being physically active does not modify this association. Furthermore, these two lifestyle factors do not synergistically relate to cognitive functioning.

Etudes diélectriques de la transition ferroélectrique induite par application d'un champ électrique dans les céramiques PbMg{1/3}Nb{2/3}O3 (PMN)

NASA Astrophysics Data System (ADS)

Chabin, M.; Malki, M.; Husson, E.; Morell, A.

1994-07-01

The evolution of the dielectric permittivity and loss factor under an external applied electric field has been studied in PbMg{1/3}Nb{2/3}O3 ceramics between 80 and 420 K. For a threshold field of 4 kV.cm^{-1}, it is possible to induce a ferroelectric transition from the average cubic phase to a macroscopically polar phase. The poling and depoling temperatures depend on the various combinations of thermal treatments and on the applied field strength. The transition between the nanopolar state and the macropolar state is discussed L'évolution de la permittivité diélectrique et du facteur de pertes diélectriques sous un champ électrique extérieur a été étudiée dans des céramiques de PbMg{1/3}Nb{2/3}O3 enre 80 et 420 K. Pour un champ de seuil de 4 kV.cm^{-1} il est possible d'induire une transition ferroélectrique de la phase cubique moyenne en une phase macroscopiquement polaire. Les températures de polarisation et de dépolarisation dépendent des différentes combinaisons de traitements thermiques et de la valeur du champ appliqué. La transition entre la phase constituée de nanodomaines polaires et la phase constituée de macrodomaines polaires est discutée.

[Descriptive Study of the Activities Performed By the Provincial Medical Deontology Commissions].

PubMed

García-Guerrero, Julio; Tarazona López, Ernesto; Martínez Calduch, Blanca; Vera-Remartínez, Enrique Jesús; Jiménez de Aldasoro, María Antonia; Boix Rajadell, Vicente; Ventura López, Mario

2016-01-01

to describe the expedient's features those settle the medical ethics commissions of the provincial colleges (PMEC). descriptive study, retrospective from the typology of the received claims to the PMEC between 01-06-2013 and 31-05-2014. The colleges were selected by simple stratified random sample. Variables related with the origin of the claim, chapter of the Medical Ethics Code affected, resolution timescales, judgement and others; were gathered. Descriptive analysis of the variables, expressing with medians the quantitative variables and their corresponding interquartile ranges; and with absolute and relative frequencies the qualitative ones. A bivariate analysis, through Kruskal-Wallis and Chi-square tests. 10 provincial colleges participated (47.652 members, 20.2% from the Spanish total) that communicated 120 claims. Overall impact: 2.5 claims %0 members/year. The denouncers are mainly patients (80%). The family medicine is the most affected specialty (19.2% of the claims), the quality of the medical attention the most affected chapter of the CD (60% of the claims). The global resolution timescale was 115.5 days (55-187). The PMEC judged ethical failure in 17 cases (14.2), 10 of them within the private sector. 8 (6.7%) were pending on the date 01-03-2015. 8 cases (6.7%) ended in disciplinary file by the management board, one in verbal amonestation and one was pendent of resolution. the incidence of the medical ethics claims is low, as well as the proportion of disciplinary files. Too many discrepancies exist between the judgements of the PMEC and the college's management boards.

Quality Assurance Specifications for Planetary Protection Assays

NASA Astrophysics Data System (ADS)

Baker, Amy

As the European Space Agency planetary protection (PP) activities move forward to support the ExoMars and other planetary missions, it will become necessary to increase staffing of labo-ratories that provide analyses for these programs. Standardization of procedures, a comprehen-sive quality assurance program, and unilateral training of personnel will be necessary to ensure that the planetary protection goals and schedules are met. The PP Quality Assurance/Quality Control (QAQC) program is designed to regulate and monitor procedures performed by labora-tory personnel to ensure that all work meets data quality objectives through the assembly and launch process. Because personnel time is at a premium and sampling schedules are often de-pendent on engineering schedules, it is necessary to have flexible staffing to support all sampling requirements. The most productive approach to having a competent and flexible work force is to establish well defined laboratory procedures and training programs that clearly address the needs of the program and the work force. The quality assurance specification for planetary protection assays has to ensure that labora-tories and associated personnel can demonstrate the competence to perform assays according to the applicable standard AD4. Detailed subjects included in the presentation are as follows: • field and laboratory control criteria • data reporting • personnel training requirements and certification • laboratory audit criteria. Based upon RD2 for primary and secondary validation and RD3 for data quality objectives, the QAQC will provide traceable quality assurance safeguards by providing structured laboratory requirements for guidelines and oversight including training and technical updates, standardized documentation, standardized QA/QC checks, data review and data archiving.

Blunt trauma of bone structures of the chest--computed tomography vs multidetector computed tomography.

PubMed

Petrović, Kosta; Turkalj, Ivan; Stojanović, Sanja; Vucaj-Cirilović, Viktorija; Nikolić, Olivera; Stojiljković, Dragana

2013-08-01

Computerized tomography (CT), especially multidetector CT (MDCT), has had a revolutionary impact in diagnostic in traumatized patients. The aim of the study was to identify and compare the frequency of injuries to bone structures of the thorax displayed with 5-mm-thick axial CT slices and thin-slice (MDCT) examination with the use of 3D reconstructions, primarily multiplanar reformations (MPR). This prospective study included 61 patients with blunt trauma submitted to CT scan of the thorax as initial assessment. The two experienced radiologists inde pendently and separately described the findings for 5-mm-thick axial CT slices (5 mm CT) as in monoslice CT examination; MPR and other 3D reconstructions along with thin-slice axial sections which were available in modern MDCT technologies. After describing thin-slice examination in case of disagreement in the findings, the examiners redescribed thin-slice examination together which was ultimately considered as a real, true finding. No statistically significant difference in interobserver evaluation of 5 mm CT examination was recorded (p > 0.05). Evaluation of fractures of sternum with 5 mm CT and MDCT showed a statistically significant difference (p < 0.05) in favor of better display of injury by MDCT examination. MDCT is a powerful diagnostic tool that can describe higher number of bone fractures of the chest in traumatized patients compared to 5 mm CT, especially in the region of sternum for which a statistical significance was obtained using MPR. Moreover, the importance of MDCT is also set by easier and more accurate determination of the level of bone injury.

Cp*Co(III) catalysts with proton-responsive ligands for carbon dioxide hydrogenation in aqueous media.

PubMed

Badiei, Yosra M; Wang, Wan-Hui; Hull, Jonathan F; Szalda, David J; Muckerman, James T; Himeda, Yuichiro; Fujita, Etsuko

2013-11-04

New water-soluble pentamethylcyclopentadienyl cobalt(III) complexes with proton-responsive 4,4'- and 6,6'-dihydroxy-2,2'-bipyridine (4DHBP and 6DHBP, respectively) ligands have been prepared and were characterized by X-ray crystallography, UV-vis and NMR spectroscopy, and mass spectrometry. These cobalt(III) complexes with proton-responsive ligands predominantly exist in their deprotonated [Cp*Co(DHBP-2H(+))(OH2)] forms with stronger electron-donating properties in neutral and basic solutions, and are active catalysts for CO2 hydrogenation in aqueous bicarbonate media at moderate temperature under a total 4-5 MPa (CO2:H2 1:1) pressure. The cobalt complexes containing 4DHBP ligands ([1-OH2](2+) and [1-Cl](+), where 1 = Cp*Co(4DHBP)) display better thermal stability and exhibit notable catalytic activity for CO2 hydrogenation to formate in contrast to the catalytically inactive nonsubstituted bpy analogues [3-OH2](2+) (3 = Cp*Co(bpy)). While the catalyst Cp*Ir(6DHBP)(OH2)(2+) in which the pendent oxyanion lowers the barrier for H2 heterolysis via proton transfer through a hydrogen-bonding network involving a water molecule is remarkably effective (ACS Catal. 2013, 3, 856-860), cobalt complexes containing 6DHBP ligands ([2-OH2](2+) and [2-Cl](+), 2 = Cp*Co(6DHBP)) exhibit lower TOF and TON for CO2 hydrogenation than those with 4DHBP. The low activity is attributed to thermal instability during the hydrogenation of CO2 as corroborated by DFT calculations.

Polyethers containing 4-(carbazol-2-yl)-7-arylbenzo[c]-1,2,5-thiadiazole chromophores as solution processed materials for hole transporting layers of OLEDs

NASA Astrophysics Data System (ADS)

Krucaite, G.; Tavgeniene, D.; Xie, Z.; Lin, X.; Zhang, B.; Grigalevicius, S.

2018-02-01

Two polyethers containing electroactive pendent 4-(carbazol-2-yl)-7-arylbenzo[c]-1,2,5-thiadiazole moieties have been synthesized by the multi-step synthetic route. Full characterization of their structures is presented. The polymers represent derivatives of very high thermal stability with initial thermal degradation temperatures of 425 °C and 431 °C. Glass transition temperatures of the amorphous materials were also very high and reached values of 154 °C and 163 °C. The electron photoemission spectra of thin layers of the polymers showed ionization potentials of 5.84 eV and 5.93 eV. Hole-transporting properties of the polymeric materials were tested in the structures of organic light emitting diodes with Alq3 as the green emitter and electron transporting material. An electroluminescent device containing hole-transporting layer (HTL) of the polymer with electroactive 4-carbazolyl-7-phenylbenzo[c]-1,2,5-thiadiazole moieties exhibited turn on voltage of 6.2 V, maximum photometric efficiency of 2.5 cd/A and maximum brightness exceeding 300 cd/m2. The device containing HTL of the polymer with 4-carbazolyl-7-(1-naphtyl)benzo[c]-1,2,5-thiadiazole moieties demonstrated turn on voltage of 5.2 V, maximum photometric efficiency of 1.6 cd/A and maximum brightness exceeding 1500 cd/m2. The efficiencies were about 30-90% higher than that of the device containing widely used hole transporting layers of poly(9-vinylcarbazole).

Novel reef fabrics from the Devonian Canning Basin, Western Australia

NASA Astrophysics Data System (ADS)

Wood, Rachel

1998-11-01

Large cement-filled cavities (0.2 to 1.5 m wide) are well developed in slope-margin sediments of the spectacular Upper Devonian (Frasnian) reefs of the Canning Basin, Western Australia, where they account for up to 50% of the primary porosity. These are here interpreted as primary reef framework cavities that formed beneath a variety of domal, tabular or laminar stromatoporoid sponges. Of particular note are those created by unusual, very thin (2 to 8 mm), laminar stromatoporoids (mainly Stachyodes australe), that formed arching, hollow domes up to 0.3 m in height and 1.5 m in diameter over the sediment surface to enclose flat-based cavities. The free undersurface of these stromatoporoids often supported a hitherto unrecognised cryptic community, dominated by pendent growth of the putative calcified cyanobacterium Renalcis, with rare intergrown lithistid sponges and spiny atrypid brachiopods. The uneven growth surface of the cryptos imparts an irregular, stromatactis-like texture to the upper surface of the remaining cavity, which is filled by early marine, finely banded, fibrous cements (mainly radiaxial calcite) interbedded with often multiple generations of geopetal sediment containing peloids and ostracod debris. This ecology yields the tabular stromatoporoid- Renalcis fabric described ubiquitously from the Canning Basin reef complex. Such unusual reef fabrics are a consequence of the ecology of shallow marine mid-Palaeozoic reefs which were quite unlike that of modern coral reefs. The frequent preservation of relatively delicate, in situ communities was due to (1) rapid and pervasive early cementation, (2) growth under non-energetic conditions, and (3) the relative insignificance of bioeroders associated with reefs at this time.

Fundamentals of sol-gel dip-coating

NASA Astrophysics Data System (ADS)

Brinker, C. Jeffrey; Hurd, Alan J.

1994-07-01

During the process of dip-coating, the substrate is withdrawn from the sol at a constant rate. After several seconds, the process becomes steady. The entrained film thins by evaporation of solvent and gravitational draining. Because the shape of the depositing film remains constant with respect to the reservoir surface, it is possible to use analytical methods such as ellipsometry and fluorescence spectroscopy to characterize the depositing film in situ. The microstructure and properties of the film depend on the size and structure of the inorganic sol species, the magnitude of the capillary pressure exerted during drying, and the relative rates of condensation and drying. By controlling these parameters, it is possible to vary the porosity of the film over a wide range. Pendant l'opération de " dip-coating ", le substrat est retiré du sol à vitesse constante. La couche s'amincit du fait de l'évaporation du solvant et de l'écoulement gravitationnel. Après plusieurs secondes, le processus atteint un régime stationnaire. Le profil du film déposé reste alors constant par rapport à la surface du sol. On peut le caractériser in situ par des méthodes optiques telles que l'ellipsométrie et la spectroscopie de fluorescence. La texture et les propriétés de la couche dépendent de la taille et de la structure (par exemple de la dimension fractale) des espèces en solution, de l'importance de la tension capillaire pendant le séchage, et des cinétiques de condensation. En contrôlant ces paramètres, on peut faire varier la porosité de la couche dans une large gamme.

Engineered polymeric nanoparticles for soil remediation.

PubMed

Tungittiplakorn, Warapong; Lion, Leonard W; Cohen, Claude; Kim, Ju-Young

2004-03-01

Hydrophobic organic groundwater contaminants, such as polynuclear aromatic hydrocarbons (PAHs), sorb strongly to soils and are difficult to remove. We report here on the synthesis of amphiphilic polyurethane (APU) nanoparticles for use in remediation of soil contaminated with PAHs. The particles are made of polyurethane acrylate anionomer (UAA) or poly(ethylene glycol)-modified urethane acrylate (PMUA) precursor chains that can be emulsified and cross-linked in water. The resulting particles are of colloidal size (17-97 nm as measured by dynamic light scattering). APU particles have the ability to enhance PAH desorption and transport in a manner comparable to that of surfactant micelles, but unlike the surface-active components of micelles, the individual cross-linked precursor chains in APU particles are not free to sorb to the soil surface. Thus, the APU particles are stable independent of their concentration in the aqueous phase. In this paper we show that APU particles can be engineered to achieve desired properties. Our experimental results show that the APU particles can be designed to have hydrophobic interior regions that confer a high affinity for phenanthrene (PHEN) and hydrophilic surfaces that promote particle mobility in soil. The affinity of APU particles for contaminants such as PHEN can be controlled by changing the size of the hydrophobic segment used in the chain synthesis. The mobility of colloidal APU suspensions in soil is controlled by the charge density or the size of the pendent water-soluble chains that reside on the particle surface. Exemplary results are provided illustrating the influence of alternative APU particle formulations with respect to their efficacy for contaminant removal. The ability to control particle properties offers the potential to produce different nanoparticles optimized for varying contaminant types and soil conditions.

Crystallinity enhancement of Nafion electrolyte membranes assisted by a molecular gelator.

PubMed

Zhang, Wenjing; Yue, Po-Lock; Gao, Ping

2011-08-02

Nanocrystallites, acting as physical cross-links in Nafion membranes, play a crucial role in building blocks for improving mechanical durability and stopping fuel crossover. However, Nafion membranes suffer from low crystallinity due to the irregular pendent side chains, which hinder self-aggregation of the poly(tetrafluoroethylene) (PTFE) backbones. For the first time, a molecular gelator was introduced in the membrane casting process to enhance the rate of self-assembly of PTFE backbones so as to increase the membrane's crystallinity as well as proton conductivity without sacrificing the purity of Nafion. The molecular gelator used was 3,4-dimethylbenzaldehyde (DMBA). Addition of 0.5 wt % DMBA led to a 42% increase in crystallinity, a 32% increase in yield strength, a 22% increase in tensile modulus and an 18% increase in proton conductivity at 60 °C and 90% relative humidity. Additionally, the membrane electrode assembly (MEA) prepared from the membranes cast from the solution containing 0.5 wt % DMBA also showed an increase of 17% in maximum power density in comparison to the MEA prepared from pure Nafion membrane in a single cell polarization test without any external humidification. Transmission electron microscopy (TEM) and molecular dynamics simulation were used to elucidate the structural changes in Nafion membrane due to the introduction of DMBA. It was observed that the presence of DMBA gives wider crystalline regions under TEM. The molecular dynamics simulation at 500 K shows that the PTFE backbones become elongated in the presence of DMBA due to the enhanced mobility. This is consistent with the observed increase in crystallinity in the membrane as it means reduced entropic change upon crystallization.

Polydiacetylene liposomes with phenylboronic acid tags: a fluorescence turn-on sensor for sialic acid detection and cell-surface glycan imaging.

PubMed

Wang, Dong-En; Yan, Jiahang; Jiang, Jingjing; Liu, Xiang; Tian, Chang; Xu, Juan; Yuan, Mao-Sen; Han, Xiang; Wang, Jinyi

2018-03-01

Sialic acid (SA) located at the terminal end of glycans on cell membranes has been shown to play an important yet distinctive role in various biological and pathological processes. Effective methods for the facile, sensitive and in situ analysis of SA on living cell surfaces are of great significance in terms of clinical diagnostics and therapeutics. Here, a new polydiacetylene (PDA) liposome-based sensor system bearing phenylboronic acid (PBA) and 1,8-naphthalimide derived fluorophore moieties was developed as a fluorescence turn-on sensor for the detection of free SA in aqueous solution and the in situ imaging of SA-terminated glycans on living cell surfaces. In the sensor system, three diacetylene monomers, PCDA-pBA, PCDA-Nap and PCDA-EA, were designed and synthesized to construct the composite PDA liposome sensor. The monomer PCDA-pBA modified with PBA molecules was employed as a receptor for SA recognition, while the monomer PCDA-Nap containing a 1,8-naphthalimide derivative fluorophore was used for fluorescence signaling. When the composite PDA liposomes were formed, the energy transfer between the fluorophore and the conjugated backbone could directly quench the fluorescence of the fluorophore. In the presence of additional SA or SA abundant cells, the strong binding of SA with PBA moieties disturbed the pendent side chain conformation, resulting in the fluorescence restoration of the fluorophore. The proposed methods realized the fluorescence turn-on detection of free SA in aqueous solution and the in situ imaging of SA on living MCF-7 cell surfaces. This work provides a new potential tool for simple and selective analysis of SA on living cell membranes.

Long-wave-instability-induced pattern formation in an evaporating sessile or pendent liquid layer

NASA Astrophysics Data System (ADS)

Wei, Tao; Duan, Fei

2018-03-01

We investigate the nonlinear dynamics and stability of an evaporating liquid layer subject to vapor recoil, capillarity, thermocapillarity, ambient cooling, viscosity, and negative or positive gravity combined with buoyancy effects in the lubrication approximation. Using linear theory, we identify the mechanisms of finite-time rupture, independent of thermocapillarity and direction of gravity, and predict the effective growth rate of an interfacial perturbation which reveals competition among the mechanisms. A stability diagram is predicted for the onset of long-wave (LW) evaporative convection. In the two-dimensional simulation, we observe well-defined capillary ridges on both sides of the valley under positive gravity and main and secondary droplets under negative gravity, while a ridge can be trapped in a large-scale drained region in both cases. Neglecting the other non-Boussinesq effects, buoyancy does not have a significant influence on interfacial evolution and rupture time but makes contributions to the evaporation-driven convection and heat transfer. The average Nusselt number is found to increase with a stronger buoyancy effect. The flow field and interface profile jointly manifest the LW Marangoni-Rayleigh-Bénard convection under positive gravity and the LW Marangoni convection under negative gravity. In the three-dimensional simulation of moderate evaporation with a random perturbation, the rupture patterns are characterized by irregular ridge networks with distinct height scales for positive and negative gravity. A variety of interfacial and internal dynamics are displayed, depending on evaporation conditions, gravity, Marangoni effect, and ambient cooling. Reasonable agreement is found between the present results and the reported experiments and simulations. The concept of dissipative compacton also sheds light on the properties of interfacial fractalization.

Acamprosate {monocalcium bis(3-acetamidopropane-1-sulfonate)} reduces ethanol-drinking behavior in rats and glutamate-induced toxicity in ethanol-exposed primary rat cortical neuronal cultures.

PubMed

Oka, Michiko; Hirouchi, Masaaki; Tamura, Masaru; Sugahara, Seishi; Oyama, Tatsuya

2013-10-15

Acamprosate, the calcium salt of bis(3-acetamidopropane-1-sulfonate), contributes to the maintenance of abstinence in alcohol-dependent patients, but its mechanism of action in the central nervous system is unclear. Here, we report the effect of acamprosate on ethanol-drinking behavior in standard laboratory Wistar rats, including voluntary ethanol consumption and the ethanol-deprivation effect. After forced ethanol consumption arranged by the provision of only one drinking bottle containing 10% ethanol, the rats were given a choice between two drinking bottles, one containing water and the other containing 10% ethanol. In rats selected for high ethanol preference, repeated oral administration of acamprosate diminished voluntary ethanol drinking. After three months of continuous access to two bottles, rats were deprived of ethanol for three days and then presented with two bottles again. After ethanol deprivation, ethanol preference was increased, and the increase was largely abolished by acamprosate. After exposure of primary neuronal cultures of rat cerebral cortex to ethanol for four days, neurotoxicity, as measured by the extracellular leakage of lactate dehydrogenase (LDH), was induced by incubation with glutamate for 1h followed by incubation in the absence of ethanol for 24h. The N-methyl-D-aspartate receptor blocker 5-methyl-10,11-dihydro-5H-dibenzo[a,d]-cyclohepten-5,10-imine, the metabotropic glutamate receptor subtype 5 antagonist 6-methyl-2-(phenylethynyl)pyridine and the voltage-gated calcium-channel blocker nifedipine all inhibited glutamate-induced LDH leakage from ethanol-exposed neurons. Acamprosate inhibited the glutamate-induced LDH leakage from ethanol-exposed neurons more strongly than that from intact neurons. In conclusion, acamprosate showed effective reduction of drinking behavior in rats and protected ethanol-exposed neurons by multiple blocking of glutamate signaling. © 2013 Elsevier B.V. All rights reserved.

Differential Modulation of Ethanol-Induced Sedation and Hypnosis by Metabotropic Glutamate Receptor Antagonists in C57BL/6J Mice

PubMed Central

Sharko, Amanda C.; Hodge, Clyde W.

2008-01-01

Background Emerging evidence implicates metabotropic glutamate receptor (mGluR) function in the neurobiological effects of ethanol. The recent development of subtype specific mGluR antagonists has made it possible to examine the roles of specific mGluRs in biochemical and behavioral responses to ethanol. The purpose of the present study was to determine if mGluRs modulate the acute sedative-hypnotic properties of ethanol in mice. Methods C57BL / 6J mice were tested for locomotor activity (sedation) and duration of loss of the righting reflex (hypnosis) following acute systemic administration of ethanol alone or in combination with the mGluR5-selective antagonist, 2-methyl-6-(phenylethynyl)pyridine (MPEP), the mGluR1-selective antagonist, 7-(hydroxyimino)cyclopropa[b]chromen-1a-carboxylate ethyl ester (CPCCOEt), or the mGluR2 / 3-selective antagonist (2S)-2-Amino-2-[(1S,2S)-2-carboxycycloprop-1-yl]-3-(xanth-9-yl) propanoic acid (LY341495)). Results MPEP (10 and 30 mg / kg) significantly enhanced both the sedative and hypnotic effects of ethanol, while LY341495 (10 and 30 mg / kg) significantly reduced the sedative-hypnotic effects of ethanol. CPCCOEt had no effect at any concentration tested. Further loss of righting reflex experiments revealed that LY341495 (30 mg / kg) significantly reduced hypnosis induced by the gamma-aminobutyric acid type A (GABAA) positive modulators, pentobarbital (50 mg / kg) and midazolam (60 mg / kg), and the N-methyl-D-aspartate (NMDA) receptor antagonist, ketamine (150 mg / kg), while MPEP (30 mg / kg) only significantly enhanced the hypnotic properties of ketamine (150 mg / kg). Conclusions These findings suggest that specific subtypes of the metabotropic glutamate receptor differentially modulate the sedative-hypnotic properties of ethanol through separate mechanisms of action, potentially involving GABAA and NMDA receptors. PMID:18070246

Effects of the mGluR5 antagonist MPEP on ethanol withdrawal induced anxiety-like syndrome in rats.

PubMed

Kumar, Jaya; Hapidin, Hermizi; Bee, Yvonne-Tee Get; Ismail, Zalina

2013-11-26

Abstinence from chronic ethanol consumption leads to the manifestation of a variety of symptoms attributed to central nervous system hyperexcitability, such as increased irritability, anxiety, and restlessness. Recent studies have demonstrated the importance of metabotropic glutamate receptor 5 (mGluR5) in addictive behaviours. This study investigates the effects of the mGluR5 antagonist 2-methyl-6-(phenylethynyl)-pyridine (MPEP) on ethanol withdrawal induced anxiety using two behavioural paradigms. Male Wistar rats were fed a Modified Liquid Diet (MLD) containing low fat cow milk, sucrose, and maltodextrin with a gradual introduction of 2.4%, 4.8% and 7.2% ethanol for 20 days. Six hours into ethanol withdrawal, the rats were intraperitoneally injected with normal saline and MPEP (2.5, 5.0, 10, 20, 30 mg/kg) and were assessed for ethanol withdrawal induced anxiety-like syndrome using an automated elevated plus maze and an open field. MPEP at 10 mg/kg significantly attenuated ethanol withdrawal induced anxiety without any compromising effects on locomotor activities. Despite reversing several indices of ethanol withdrawal induced anxiety in both the elevated plus maze and the open field, low doses of MPEP (2.5, 5 mg/kg) significantly compromised the locomotor activities of ethanol withdrawn rats. High doses of MPEP (20 and 30 mg/kg) significantly attenuated withdrawal anxiety when tested in the elevated plus maze but not in the open field. Administration of MPEP (2.5, 5, 10, 20, 30 mg/kg) has no significant compromising effect on the locomotor activities of ethanol naïve rats. Despite significantly reducing withdrawal anxiety in both behavioural paradigms at 10 mg/kg, the compromising effects of low and high doses of MPEP must be further explored along with the therapeutic efficiency of this drug for relieving withdrawal induced anxiety.

Effects of the mGluR5 antagonist MPEP on ethanol withdrawal induced anxiety-like syndrome in rats

PubMed Central

2013-01-01

Abstinence from chronic ethanol consumption leads to the manifestation of a variety of symptoms attributed to central nervous system hyperexcitability, such as increased irritability, anxiety, and restlessness. Recent studies have demonstrated the importance of metabotropic glutamate receptor 5 (mGluR5) in addictive behaviours. This study investigates the effects of the mGluR5 antagonist 2-methyl-6-(phenylethynyl)-pyridine (MPEP) on ethanol withdrawal induced anxiety using two behavioural paradigms. Male Wistar rats were fed a Modified Liquid Diet (MLD) containing low fat cow milk, sucrose, and maltodextrin with a gradual introduction of 2.4%, 4.8% and 7.2% ethanol for 20 days. Six hours into ethanol withdrawal, the rats were intraperitoneally injected with normal saline and MPEP (2.5, 5.0, 10, 20, 30 mg/kg) and were assessed for ethanol withdrawal induced anxiety-like syndrome using an automated elevated plus maze and an open field. MPEP at 10 mg/kg significantly attenuated ethanol withdrawal induced anxiety without any compromising effects on locomotor activities. Despite reversing several indices of ethanol withdrawal induced anxiety in both the elevated plus maze and the open field, low doses of MPEP (2.5, 5 mg/kg) significantly compromised the locomotor activities of ethanol withdrawn rats. High doses of MPEP (20 and 30 mg/kg) significantly attenuated withdrawal anxiety when tested in the elevated plus maze but not in the open field. Administration of MPEP (2.5, 5, 10, 20, 30 mg/kg) has no significant compromising effect on the locomotor activities of ethanol naïve rats. Despite significantly reducing withdrawal anxiety in both behavioural paradigms at 10 mg/kg, the compromising effects of low and high doses of MPEP must be further explored along with the therapeutic efficiency of this drug for relieving withdrawal induced anxiety. PMID:24279870

Pharmacological interference with metabotropic glutamate receptor subtype 7 but not subtype 5 differentially affects within- and between-session extinction of Pavlovian conditioned fear.

PubMed

Toth, Iulia; Dietz, Monika; Peterlik, Daniel; Huber, Sabine E; Fendt, Markus; Neumann, Inga D; Flor, Peter J; Slattery, David A

2012-03-01

Fear extinction is defined as the attenuation of a conditioned-fear memory by re-exposing animals to the conditioned stimulus without the aversive stimulus. This process is known to be effectively enhanced via administration of D-cycloserine (DCS), a partial NMDA-receptor agonist. However, other glutamatergic mechanisms, such as interference with metabotropic glutamate receptor (mGluR) subtypes 5 and 7 in the extinction of aversive memories are insufficiently understood. Using the allosteric mGluR5 receptor antagonist 2-methyl-6-(phenylethynyl)-pyridine (MPEP), the mGluR7 allosteric agonist N,N'-dibenzyhydryl-ethane-1,2-diamine dihydrochloride (AMN082), and DCS for comparison, we aimed to study how pharmacological blockade of mGluR5 and activation of mGluR7 influenced within- and between-session conditioned-fear extinction training and extinction retention in rats. We show that when injected before extinction training, mGluR7 activation with AMN082 enhanced freezing and thereby attenuated within-session fear extinction, whereas both DCS and the mGluR5 receptor antagonist MPEP had no effect on this process. However, these differential drug effects were not long lasting, as no difference in extinction retention were observed 24 h later. Therefore, we assessed whether the compounds affect 24 h consolidation of extinction training following incomplete extinction training (between-session extinction). Similar to DCS, AMN082- but not MPEP-treated rats showed facilitated extinction retention, as exhibited by decreased freezing. Finally, using fluoxetine, we provide evidence that the effect of AMN082 on between-session extinction retention is most likely not via increasing 5-HT transmission. These findings demonstrate that mGluR7 activation differentially modulates conditioned-fear extinction, in dependence on the protocol employed, and suggests drugs with AMN082-like mechanisms as potential add-on drugs following exposure-based psychotherapy for fear-related human disorders. Copyright © 2011 Elsevier Ltd. All rights reserved.

Assessing the role of metabotropic glutamate receptor 5 in multiple nociceptive modalities.

PubMed

Zhu, Chang Z; Wilson, Sonya G; Mikusa, Joseph P; Wismer, Carol T; Gauvin, Donna M; Lynch, James J; Wade, Carrie L; Decker, Michael W; Honore, Prisca

2004-12-15

Preclinical data, performed in a limited number of pain models, suggest that functional blockade of metabotropic glutamate (mGlu) receptors may be beneficial for pain management. In the present study, effects of 2-methyl-6-(phenylethynyl)-pyridine (MPEP), a potent, selective mGlu5 receptor antagonist, were examined in a wide variety of rodent nociceptive and hypersensitivity models in order to fully characterize the potential analgesic profile of mGlu5 receptor blockade. Effects of 3-[(2-methyl-1,3-thiazol-4-yl)ethynyl]pyridine (MTEP), as potent and selective as MPEP at mGlu5/mGlu1 receptors but more selective than MPEP at N-methyl-aspartate (NMDA) receptors, were also evaluated in selected nociceptive and side effect models. MPEP (3-30 mg/kg, i.p.) produced a dose-dependent reversal of thermal and mechanical hyperalgesia following complete Freund's adjuvant (CFA)-induced inflammatory hypersensitivity. Additionally, MPEP (3-30 mg/kg, i.p.) decreased thermal hyperalgesia observed in carrageenan-induced inflammatory hypersensitivity without affecting paw edema, abolished acetic acid-induced writhing activity in mice, and was shown to reduce mechanical allodynia and thermal hyperalgesia observed in a model of post-operative hypersensitivity and formalin-induced spontaneous pain. Furthermore, at 30 mg/kg, i.p., MPEP significantly attenuated mechanical allodynia observed in three neuropathic pain models, i.e. spinal nerve ligation, sciatic nerve constriction and vincristine-induced neuropathic pain. MTEP (3-30 mg/kg, i.p.) also potently reduced CFA-induced thermal hyperalgesia. However, at 100 mg/kg, i.p., MPEP and MTEP produced central nerve system (CNS) side effects as measured by rotarod performance and exploratory locomotor activity. These results suggest a role for mGlu5 receptors in multiple nociceptive modalities, though CNS side effects may be a limiting factor in developing mGlu5 receptor analgesic compounds.

Anhydrous versus hydrated N4-substituted 1H-pyrazolo[3,4-d]pyrimidine-4,6-diamines: hydrogen bonding in two and three dimensions.

PubMed

Trilleras, Jorge; Quiroga, Jairo; Cobo, Justo; Marchal, Antonio; Nogueras, Manuel; Low, John N; Glidewell, Christopher

2008-10-01

Ten new N(4)-substituted 1H-pyrazolo[3,4-d]pyrimidine-4,6-diamines have been synthesized and the structures of nine of them are reported here, falling into two clear groups, those which are stoichiometric hydrates and those which crystallize in solvent-free forms. In each of N(4)-methyl-N(4)-phenyl-1H-pyrazolo[3,4-d]pyrimidine-4,6-diamine, C(12)H(12)N(6) (I), N(4)-cyclohexyl-N(4)-methyl-1H-pyrazolo[3,4-d]pyrimidine-4,6-diamine, C(12)H(18)N(6) (II), and N(4)-(3-chlorophenyl)-1H-pyrazolo[3,4-d]pyrimidine-4,6-diamine, C(11)H(9)ClN(6) (III), the molecules are linked into hydrogen-bonded sheets. The molecules of 2-{4-(6-amino-1H-pyrazolo[3,4-d]pyrimidin-4-yl)piperazin-1-yl}ethanol, C(11)H(17)N(7)O (IV), are linked into a three-dimensional framework, while the structure of N(4)-methyl-N(4)-(4-methylphenyl)-1H-pyrazolo[3,4-d]pyrimidine-4,6-diamine monohydrate, C(13)H(14)N(6) x H(2)O (V), is only two-dimensional despite the presence of five independent hydrogen bonds. The stoichiometric hemihydrates N(4)-ethyl-N(4)-phenyl-1H-pyrazolo[3,4-d]pyrimidine-4,6-diamine hemihydrate, C(13)H(14)N(6) x 0.5 H(2)O (VI) and N(4)-(4-methoxyphenyl)-N(4)-methyl-1H-pyrazolo[3,4-d]pyrimidine-4,6-diamine hemihydrate, C(13)H(14)N(6)O x 0.5 H(2)O (VII), exhibit remarkably similar sheet structures, despite different space groups and Z' values, Z' = 0.5 in C2/c for (VI) and Z' = 1 in P1 for (VII). N(4)-4-Benzyl-N(4)-phenyl-1H-pyrazolo[3,4-d]pyrimidine-4,6-diamine monohydrate, C(18)H(16)N(6) x H(2)O (VIII), crystallizes with Z' = 2 in P2(1)/n, and the four independent molecular components are linked into sheets by a total of 11 intermolecular hydrogen bonds. The sheet structure in {4-(pyrrolidin-1-yl)-1H-pyrazolo[3,4-d]pyrimidine-6-amine} ethanol hemisolvate hemihydrate, C(9)H(12)N(6).0.5C(2)H(6)O x 0.5 H(2)O (IX), is built from the pyrimidine and water components only; it contains eight independent hydrogen bonds, and it very closely mimics the sheets in (VI) and (VII); the ethanol molecules are pendent from these sheets. The N(4)-alkyl-N(4)-aryl-4-aminopyrazolopyrimidine molecules in (I), (V)-(VIII) all adopt very similar conformations, dominated in each case by an intramolecular C-H...pi(arene) hydrogen bond: this interaction is absent from (III) where the molecular conformation is entirely different and probably dominated by the intermolecular hydrogen bonds.

Possible involvement of AMPK in acute exercise-induced expression of monocarboxylate transporters MCT1 and MCT4 mRNA in fast-twitch skeletal muscle.

PubMed

Takimoto, Masaki; Takeyama, Mirei; Hamada, Taku

2013-11-01

The regulatory mechanisms responsible for acute exercise-induced expression of monocarboxylate transporters MCT1 and MCT4 mRNA in skeletal muscle remain unclear. 5'-adenosine-activated protein kinase (AMPK) is a key signaling molecule that regulates gene expression at the mRNA level. We examined whether AMPK activation is involved in acute exercise-induced expression of MCT1 and MCT4 mRNA in fast-twitch muscle. Male Sprague-Dawley rats were subjected to an acute bout of either 5min high-intensity intermittent swimming (HIS) or 6-h low-intensity prolonged swimming (LIS). The effects of acute exercise on the phosphorylation of AMPK (p-AMPK), calcium/calmodulin pendent kinase II (p-CaMKII), p38 mitogen-activated protein kinase (p-p38MAPK), and MCTs mRNA were analyzed in vivo. To observe the direct effects of AMPK activation on MCTs mRNA, the effects of 5-aminoimidazole-4-carboxamide-1-beta-D-ribofuranoside (AICAR), caffeine, and dantrolene were analyzed in vitro using an isolated muscle incubation model. The p-AMPK increased in response to both HIS and LIS, although the p-CaMKII and p-p38MAPK were increased only following HIS. Irrespective of exercise intensity, MCT1 and MCT4 mRNA was also transiently upregulated by both HIS and LIS. Direct exposure of the epitrochlearis muscle to 0.5mmol/L AICAR or 1mmol/L caffeine, which activated p-AMPK increased both MCT1 and MCT4 mRNA levels. When pAMPK was inhibited by dantrolene, neither MCT1 nor MCT4 mRNA was increased. These results suggest that acute exercise-induced increases in MCT1 and MCT4 mRNA expression may be possibly mediated by AMPK activation, at least in part in fast-twitch muscle. © 2013.

Network-based Modeling of Mesoscale Catchments - The Hydrology Perspective of Glowa-danube

NASA Astrophysics Data System (ADS)

Ludwig, R.; Escher-Vetter, H.; Hennicker, R.; Mauser, W.; Niemeyer, S.; Reichstein, M.; Tenhunen, J.

Within the GLOWA initiative of the German Ministry for Research and Educa- tion (BMBF), the project GLOWA-Danube is funded to establish a transdisciplinary network-based decision support tool for water related issues in the Upper Danube wa- tershed. It aims to develop and validate integration techniques, integrated models and integrated monitoring procedures and to implement them in the network-based De- cision Support System DANUBIA. An accurate description of processes involved in energy, water and matter fluxes and turnovers requires an intense collaboration and exchange of water related expertise of different scientific disciplines. DANUBIA is conceived as a distributed expert network and is developed on the basis of re-useable, refineable, and documented sub-models. In order to synthesize a common understand- ing between the project partners, a standardized notation of parameters and functions and a platform-independent structure of computational methods and interfaces has been established using the Unified Modeling Language UML. DANUBIA is object- oriented, spatially distributed and raster-based at its core. It applies the concept of "proxels" (Process Pixel) as its basic object, which has different dimensions depend- ing on the viewing scale and connects to its environment through fluxes. The presented study excerpts the hydrological view point of GLOWA-Danube, its approach of model coupling and network based communication (using the Remote Method Invocation RMI), the object-oriented technology to simulate physical processes and interactions at the land surface and the methodology to treat the issue of spatial and temporal scal- ing in large, heterogeneous catchments. The mechanisms applied to communicate data and model parameters across the typical discipline borders will be demonstrated from the perspective of a land-surface object, which comprises the capabilities of interde- pendent expert models for snowmelt, soil water movement, runoff formation, plant growth and radiation balance in a distributed JAVA-based modeling environment. The coupling to the adjacent physical objects of atmosphere, groundwater and river net- work will also be addressed.

Measurements of Submicron Particle Adsorption and Particle Film Elasticity at Oil-Water Interfaces.

PubMed

Manga, Mohamed S; Hunter, Timothy N; Cayre, Olivier J; York, David W; Reichert, Matthew D; Anna, Shelly L; Walker, Lynn M; Williams, Richard A; Biggs, Simon R

2016-05-03

The influence of particle adsorption on liquid/liquid interfacial tension is not well understood, and much previous research has suggested conflicting behaviors. In this paper we investigate the surface activity and adsorption kinetics of charge stabilized and pH-responsive polymer stabilized colloids at oil/water interfaces using two tensiometry techniques: (i) pendant drop and (ii) microtensiometer. We found, using both techniques, that charge stabilized particles had little or no influence on the (dynamic) interfacial tension, although dense silica particles affected the "apparent" measured tension in the pendent drop, due to gravity driven elongation of the droplet profile. Nevertheless, this apparent change additionally allowed the study of adsorption kinetics, which was related qualitatively between particle systems by estimated diffusion coefficients. Significant and real interfacial tension responses were measured using ∼53 nm core-shell latex particles with a pH-responsive polymer stabilizer of poly(methyl methacrylate)-b-poly(2-(dimethylamino)ethyl methacrylate) (pMMA-b-pDMAEMA) diblock copolymer. At pH 2, where the polymer is strongly charged, behavior was similar to that of the bare charge-stabilized particles, showing little change in the interfacial tension. At pH 10, where the polymer is discharged and poorly soluble in water, a significant decrease in the measured interfacial tension commensurate with strong adsorption at the oil-water interface was seen, which was similar in magnitude to the surface activity of the free polymer. These results were both confirmed through droplet profile and microtensiometry experiments. Dilational elasticity measurements were also performed by oscillation of the droplet; again, changes in interfacial tension with droplet oscillation were only seen with the responsive particles at pH 10. Frequency sweeps were performed to ascertain the dilational elasticity modulus, with measured values being significantly higher than previously reported for nanoparticle and surfactant systems, and similar in magnitude to protein stabilized droplets.

Postorogenic emplacement of the Santa Marta Batholith, northwestern flank of the Sierra Nevada de Santa Marta (SNSM).

NASA Astrophysics Data System (ADS)

Sanchez Sierra, Johan Miguel Sebastian; Kammer, Andreas

2017-04-01

The Santa Marta Batholith (BSM) belongs to a Paleogene intrusive suite of the Santa Marta massif, an exhumed triangular block at the southern Caribbean margin. Its Paleogene age precludes its association to an active margin, although its emplacement was controlled by the flexure of the down-bent Southamerican plate. Its internal structure is outlined by a mafic border facies and a felsic core, both having a petrologic affinity to a TTG-suite. According to existing age data, the BSM consolidated sequentially from SW to NE, with a first pulse having crystallized at 56 Ma in the southern domain and a final pulse in the northern domain at 52-50 Ma. Pressures varied between 5-7 kb, corresponding to depths of 14-19 km. This study combines structural, thermochronological and geochemical data with an analysis of Anisotropy and Magnetic Susceptibility (AMS) and paleomagnetism. The SNSM had a clockwise rotation of 30 ° and the ASM results help distinguish between two fault-bounded structural domains. The southern domain is characterized by a magnetic foliation concordant to the contact of the host rock that dips toward the hinterland. The northern domain, in contrast, displays a N-S trending magnetic foliation that is oblique to the regional structural northeastern trend. This divergence is supported by the orientation of mineral lineations, enclaves and dikes. In spite of its arc signature, anomalies like enrichment in Ti, depletion of Nb-Ta and Zr-Hf, as well as flat REE patterns can be associated to the accumulation of crystallized mafic minerals from less-fractionated magmas. These data evidence mingling. Asymmetric internal organization, as indicated by a hinterland-dipping roof pendent, the structural setting at the margin of a thickened continental margin and its geochemical signature favor a scenario of a magma generation at a mid-crustal level and its consequent extrusion along a channel, that connected to the crustal bend of the continental plate that was inherited from the Cretaceous subduction cycle.

Phenylethynyl Containing Polyarylene Ethers/Polyimides Resin Infiltration of Composites

NASA Technical Reports Server (NTRS)

Dunn, DeRome O.

1998-01-01

The following tasks were performed at NCA&TSU during the second year in performance of the grant. LaRC-LV-1 13 resin was synthesized at NCA&TSU. In order to perform the synthesis, glassware and needed apparatus were purchased with grant funds along with the appropriate monomers. It was found that the LaRC-LV-1 13 resin was easily synthesized by the NMP solvent/toluene imminization/distilled water precipitation process. However, in use this resin exhibited a bubbling/foaming behavior during cure that was detrimental leading to the production of composite panels having a high void content. Composite panels were fabricated using compression molding and resin transfer molding (RTM) techniques. Initial fiber volume determinations were computed at NCA&TSU along with NASA-Langley measured c-scans on the panels produced. The initial results indicated a unsatisfactory level of approximately 20% by volume of voids. Testing of uniaxial coupons in compression to failure also agreed with these results. The uniaxial coupons delaminated as the major mode of failure indicative of an unacceptably low level of resin and to much void content in the final composites produced. In discussions with Dr. Brian Jensen, it was suggested the void fraction needs to be reduced to at least 2% by volume for a useful composite. The panels produced used both resin synthesized at NASA-Langley and NCA&TSU. In reviewing our progress over the past year, it was noted that the resin as formulated by the current synthesis process bubbled at elevated temperature. This was especially observed in neat resin slugs cured at the recommended one, four and eight hour cure temperatures. Pressurized cures where then performed with pressures up to 200 psi and simultaneously the lowest eight hour cure temperatures. Although this procedure reduced the amount of bubbles to some extent in the neat resin slugs it did not completely eliminate them. The cure reaction appears to be very energetic even at the lowest recommended cure temperature. Currently, the pressurized cure apparatus developed at NCA&TSU is limited to 200 psi.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Storey, Robson, F.; Mauritz, Kenneth, A.; Patton, Derek, L.

The overall objective of this project was the development and evaluation of novel hydrocarbon fuel cell (FC) membranes that possess high temperature performance and long term chemical/mechanical durability in proton exchange membrane (PEM) fuel cells (FC). The major research theme was synthesis of aromatic hydrocarbon polymers of the poly(arylene ether sulfone) (PAES) type containing sulfonic acid groups tethered to the backbone via perfluorinated alkylene linkages and in some cases also directly attached to the phenylene groups along the backbone. Other research themes were the use of nitrogen-based heterocyclics instead of acid groups for proton conduction, which provides high temperature, lowmore » relative humidity membranes with high mechanical/thermal/chemical stability and pendant moieties that exhibit high proton conductivities in the absence of water, and synthesis of block copolymers consisting of a proton conducting block coupled to poly(perfluorinated propylene oxide) (PFPO) blocks. Accomplishments of the project were as follows: 1) establishment of a vertically integrated program of synthesis, characterization, and evaluation of FC membranes, 2) establishment of benchmark membrane performance data based on Nafion for comparison to experimental membrane performance, 3) development of a new perfluoroalkyl sulfonate monomer, N,N-diisopropylethylammonium 2,2-bis(p-hydroxyphenyl) pentafluoropropanesulfonate (HPPS), 4) synthesis of random and block copolymer membranes from HPPS, 5) synthesis of block copolymer membranes containing high-acid-concentration hydrophilic blocks consisting of HPPS and 3,3'-disulfonate-4,4'-dichlorodiphenylsulfone (sDCDPS), 6) development of synthetic routes to aromatic polymer backbones containing pendent 1H-1,2,3-triazole moieties, 7) development of coupling strategies to create phase-separated block copolymers between hydrophilic sulfonated prepolymers and commodity polymers such as PFPO, 8) establishment of basic performance properties of experimental membranes, 9) fabrication and FC performance testing of membrane electrode assemblies (MEA) from experimental membranes, and 10) measurement of ex situ and in situ membrane durability of experimental membranes. Although none of the experimental hydrocarbon membranes that issued from the project displayed proton conductivities that met DOE requirements, the project contributed to our basic understanding of membrane structure-property relationships in a number of key respects. An important finding of the benchmark studies is that physical degradation associated with humidity and temperature variations in the FC tend to open new fuel crossover pathways and act synergistically with chemical degradation to accelerate overall membrane degradation. Thus, for long term membrane survival and efficient fuel utilization, membranes must withstand internal stresses due to humidity and temperature changes. In this respect, rigid aromatic hydrocarbon fuel cell membranes, e.g. PAES, offer an advantage over un-modified Nafion membranes. The benchmark studies also showed that broadband dielectric spectroscopy is a potentially powerful tool in assessing shifts in the fundamental macromolecular dynamics caused by Nafion chemical degradation, and thus, this technique is of relevance in interrogating proton exchange membrane durability in fuel cells and macromolecular dynamics as coupled to proton migration, which is of fundamental relevance in proton exchange membranes in fuel cells. A key finding from the hydrocarbon membrane synthesis effort was that rigid aromatic polymers containing isolated ion exchange groups tethered tightly to the backbone (short tether), such as HPPS, provide excellent mechanical and durability properties but do not provide sufficient conductivity, in either random or block configuration, when used as the sole ion exchange monomer. However, we continue to hypothesize that longer tethers, and tethered groups spaced more closely within the hydrophilic chain elements of the polymer, will yield highly conductive materials with excellent mechanical properties. Another key finding is the superior performance of PAES membranes upon being subjected to open circuit voltage (OCV) testing. Throughout the course of the experiment, OCV for the PAES not only stayed higher but also decayed at a much lower rate, which is attributed to better dimensional stability and improved mechanical and gas barrier properties. The rigid backbone reinforcement of PAES adds gas diffusion tortuosity that restricts membrane degradation and OCV loss due to reduced fuel crossover. The overall results of creep, contractile stress and mechanical tensile tests confirm the conclusion that degraded MEAs of PAES membrane can handle stress and are more likely to be more durable in a fuel cell, even after subjected to 62h of OCV degradation.« less

Phosphazenes for energy production and storage: Applied and exploratory synthesis

NASA Astrophysics Data System (ADS)

Hess, Andrew R.

This dissertation involves progress toward phosphazene-based ion conducting materials with a focus on structure-property relationships to improve these materials. This dissertation also includes some more fundamental exploratory syntheses to probe the limits of phosphazene chemistry and discover structure-property relationships that may be useful in designing compounds to fulfill important technical requirements. Chapter 1 provides a brief introduction to polymers and polyphosphazenes as well as ion-conducting materials and the contribution of polyphosphazene chemistry to that field. Chapter 1 also provides a brief introduction to some analytical techniques. Chapter 2 begins with the use of organophosphates as stand-alone non-volatile and fire-retardant liquid electrolyte media for dye sensitized solar cells (DSSCs) as well as their use as plasticizer in polymer gel electrolytes intended for application in lithium batteries. These organophosphates are the smallest phosphorus containing model molecules investigated in this dissertation. A homologous series of oligoalkyleneoxy substituted phosphates was synthesized and the effect of the substituent chain length on viscosity and conductivity was investigated. Small, test-scale DSSCs were constructed and showed promising results with overall cell efficiencies of up to 3.6% under un-optimized conditions. Conductivity measurements were performed on polymer gel-electrolytes based on poly[bis(2-(2-methoxyethoxy)ethoxy)phosphazene] (MEEP) plasticized with the phosphate with the best combination of properties, using a system loaded with lithium trifluoromethanesulfonate as the charge carrier. In chapter 3 the effect of the cation of the charge carrier species on the anionic conductivity of DSSC type electrolytes is evaluated using hexakis(2-(2-methoxyethoxy)ethoxy)cyclotriphosphazene (MEE-trimer) as a small molecule model for MEEP. The iodides of lithium, sodium, and ammonium as well as the ionic liquid, 1-propyl-3-methylimidazolium iodide (PMII) were tested in various electrolyte concentrations. After identifying PMII as the most efficient salt additive for promoting anion conduction in the MEE-trimer systems, it was tested in MEEP-based DSSC polymer-gel electrolytes plasticized with propylene carbonate (PC). The MEEP/PMII type electrolytes were compared against and outperformed similar formulations based on poly(ethylene oxide). Chapter 4 extends the concept of poly[(oligoethyleneoxy)phosphazene] electrolytes by the synthesis of MEEP-analogues with various ammonium ions covalently bound to the polymer side chains in order to create a single-ion conducting polyelectrolyte. In this case iodide is the only ion that is free to move and carry charge since the cation is bound to the polymer. Two candidates from the series of polyelectrolytes were selected for extensive study, one in which the ammonium ion has a hexyl group, and another in which the ammonium ion has an MEE-group. The polymers were characterized by dielectric spectroscopy, X-ray scattering, and density functional theory calculations. In chapter 5 the concept of polyphosphazene based polyelectrolytes is extended further by quaternization of nitrogen atoms that are a part of the polymer backbone rather than a pendent group. The feasibility of the concept is first explored using cyclic-trimeric phosphazenes as small molecule models and is then extended to high polymeric systems. Chapter 6 begins a new section of exploratory synthesis meant to probe the limits of phosphazene chemistry and discover useful structure-property relationships as well as to improve on the synthetic procedures of the past. Thus, in chapter 6 a series of cyclotriphosphazenes is synthesized for evaluation as compounds with the ability to complex to metal surfaces or to form ceramic materials after pyrolysis. Several known compounds are resynthesized, many with improvements over previously published procedures either in yield or simplicity of reaction conditions. Also, two new cyclotriphosphazenes were synthesized in an attempt to produce a catechol-like side group that could mimic the metal complexation and adhesive abilities of mussel adhesive proteins which take advantage of similar catecholic moieties. Chapter 7 presents the synthesis of fluorine-bearing aryloxy phosphazenes in an attempt to overcome the deficiencies of some of the classical fluorinated organic polymers. Poly(fluoroaryloxy)phosphazenes can offer many of the same advantages without the deficiencies of some of the more classical organic fluorinated polymers. The materials synthesized are excellent candidates for dielectric film materials in capacitors. In chapter 8 new ground is broken in phosphazene chemistry, wherein cycloalkanoxy groups, a type of side-group for phosphazenes that has been neglected in the past, are attached to the phosphazene skeleton. First, a single previous report of the synthesis of hexakis(cyclohexanoxy)cyclotriphosphazene was reproduced as a model system. Then a series of single substituent polyphosphazenes was synthesized in order to determine how large a saturated cyclic ring can be attached to the polymer backbone while still completing the replacement of the chlorine atoms attached to the backbone. Subsequently, a series of mixed substituent polymers containing both cycloalkanoxy groups (from cyclopentoxy to cyclooctanoxy) and the well-studied trifluoroethoxy group was synthesized and characterized in order to study larger saturated cyclic rings as polyphosphazene side-groups. Chapter 9 contains the author's recommendations. (Abstract shortened by UMI.).

Steric modulation of coordination number and reactivity in the synthesis of lanthanoid(III) formamidinates.

PubMed

Cole, Marcus L; Deacon, Glen B; Forsyth, Craig M; Junk, Peter C; Konstas, Kristina; Wang, Jun

2007-01-01

Reactions of a range of the readily prepared and sterically tunable N,N'-bis(aryl)formamidines with lanthanoid metals and bis(pentafluorophenyl)mercury (Hg(C6F5)2) in THF have given an extensive series of tris(formamidinato)lanthanoid(III) complexes, [Ln(Form)3(thf)n], namely [La(o-TolForm)3(thf)2], [Er(o-TolForm)3(thf)], [La(XylForm)3(thf)], [Sm(XylForm)3], [Ln(MesForm)3] (Ln=La, Nd, Sm and Yb), [Ln(EtForm)3] (Ln=La, Nd, Sm, Ho and Yb), and [Ln(o-PhPhForm)3] (Ln=La, Nd, Sm and Er). [For an explanation of the N,N'-bis(aryl)formamidinate abbreviations used see Scheme 1.] Analogous attempts to prepare [Yb(o-TolForm)3] by this method invariably yielded [{Yb(o-TolForm)2(mu-OH)(thf)}2], but [Yb(o-TolForm)3] was isolated from a metathesis synthesis. X-ray crystal structures show exclusively N,N'-chelation of the Form ligands and a gradation in coordination number with Ln3+ size and with Form ligand bulk. The largest ligands, MesForm, EtForm and o-PhPhForm give solely homoleptic complexes, the first two being six-coordinate, the last having an eta1-pi-Ar--Ln interaction. Reaction of lanthanoid elements and Hg(C6F5)2 with the still bulkier DippFormH in THF resulted in C--F activation and formation of [Ln(DippForm)2F(thf)] (Ln=La, Ce, Nd, Sm and Tm) complexes, and o-HC6F4O(CH2)4DippForm in which the formamidine is functionalised by a ring-opened THF that has trapped tetrafluorobenzyne. Analogous reactions between Ln metals, Hg(o-HC6F4)2 and DippFormH yielded [Ln(DippForm)2F(thf)] (Ln=La, Sm and Nd) and 3,4,5-F3C6H2O(CH2)4DippForm. X-ray crystal structures of the heteroleptic fluorides show six-coordinate monomers with two chelating DippForm ligands and cisoid fluoride and THF ligands in a trigonal prismatic array. The organometallic species [Ln(DippForm)2(C[triple chemical bond]CPh)(thf)] (Ln=Nd or Sm) are obtained from reaction of Nd metal, bis(phenylethynyl)mercury (Hg(C[triple chemical bond]CPh)2) and DippFormH, and the oxidation of [Sm(DippForm)2(thf)2] with Hg(C[triple chemical bond]CPh)2, respectively. The monomeric, six-coordinate, cisoid [Ln(DippForm)2(C[triple chemical bond]CPh)(thf)] complexes have trigonal prismatic geometries and rare (for Ln) terminal C[triple chemical bond]CPh groups with contrasting Ln--C[triple chemical bond]C angles (Ln=Nd, 170.9(4) degrees; Ln=Sm, 142.9(7) degrees). Their formation lends support to the view that [Ln(DippForm)2F(thf)] complexes arise from oxidative formation and C--F activation of [Ln(DippForm)2(C6F5)] intermediates.

Médecine des voyages

PubMed Central

Aw, Brian; Boraston, Suni; Botten, David; Cherniwchan, Darin; Fazal, Hyder; Kelton, Timothy; Libman, Michael; Saldanha, Colin; Scappatura, Philip; Stowe, Brian

2014-01-01

Résumé Objectif Définir la pratique de la médecine des voyages, présenter les éléments fondamentaux d’une consultation complète préalable aux voyages à des voyageurs internationaux et aider à identifier les patients qu’il vaudrait mieux envoyer en consultation auprès de professionnels de la médecine des voyages. Sources des données Les lignes directrices et les recommandations sur la médecine des voyages et les maladies liées aux voyages publiées par les autorités sanitaires nationales et internationales ont fait l’objet d’un examen. Une recension des ouvrages connexes dans MEDLINE et EMBASE a aussi été effectuée. Message principal La médecine des voyages est une spécialité très dynamique qui se concentre sur les soins préventifs avant un voyage. Une évaluation exhaustive du risque pour chaque voyageur est essentielle pour mesurer avec exactitude les risques particuliers au voyageur, à son itinéraire et à sa destination et pour offrir des conseils sur les interventions les plus appropriées en gestion du risque afin de promouvoir la santé et prévenir les problèmes médicaux indésirables durant le voyage. Des vaccins peuvent aussi être nécessaires et doivent être personnalisés en fonction des antécédents d’immunisation du voyageur, de son itinéraire et du temps qu’il reste avant son départ. Conclusion La santé et la sécurité d’un voyageur dépendent du degré d’expertise du médecin qui offre le counseling préalable à son voyage et les vaccins, au besoin. On recommande à ceux qui donnent des conseils aux voyageurs d’être conscients de l’ampleur de cette responsabilité et de demander si possible une consultation auprès de professionnels de la médecine des voyages pour tous les voyageurs à risque élevé.

Early-Onset Network Hyperexcitability in Presymptomatic Alzheimer’s Disease Transgenic Mice Is Suppressed by Passive Immunization with Anti-Human APP/Aβ Antibody and by mGluR5 Blockade

PubMed Central

Kazim, Syed F.; Chuang, Shih-Chieh; Zhao, Wangfa; Wong, Robert K. S.; Bianchi, Riccardo; Iqbal, Khalid

2017-01-01

Cortical and hippocampal network hyperexcitability appears to be an early event in Alzheimer’s disease (AD) pathogenesis, and may contribute to memory impairment. It remains unclear if network hyperexcitability precedes memory impairment in mouse models of AD and what are the underlying cellular mechanisms. We thus evaluated seizure susceptibility and hippocampal network hyperexcitability at ~3 weeks of age [prior to amyloid beta (Aβ) plaque deposition, neurofibrillary pathology, and cognitive impairment] in a triple transgenic mouse model of familial AD (3xTg-AD mouse) that harbors mutated human Aβ precursor protein (APP), tau and presenilin 1 (PS1) genes. Audiogenic seizures were elicited in a higher proportion of 3xTg-AD mice compared with wild type (WT) controls. Seizure susceptibility in 3xTg-AD mice was attenuated either by passive immunization with anti-human APP/Aβ antibody (6E10) or by blockade of metabotropic glutamate receptor 5 (mGluR5) with the selective antagonist, 2-methyl-6-(phenylethynyl)pyridine hydrochloride (MPEP). In in vitro hippocampal slices, suppression of synaptic inhibition with the GABAA receptor antagonist, bicuculline, induced prolonged epileptiform (>1.5 s in duration) ictal-like discharges in the CA3 neuronal network in the majority of the slices from 3xTg-AD mice. In contrast, only short epileptiform (<1.5 s in duration) interictal-like discharges were observed following bicuculline application in the CA3 region of WT slices. The ictal-like activity in CA3 region of the hippocampus was significantly reduced in the 6E10-immunized compared to the saline-treated 3xTg-AD mice. MPEP acutely suppressed the ictal-like discharges in 3xTg-AD slices. Remarkably, epileptiform discharge duration positively correlated with intraneuronal human (transgenic) APP/Aβ expression in the CA3 region of the hippocampus. Our data suggest that in a mouse model of familial AD, hypersynchronous network activity underlying seizure susceptibility precedes Aβ plaque pathology and memory impairment. This early-onset network hyperexcitability can be suppressed by passive immunization with an anti-human APP/Aβ antibody and by mGluR5 blockade in 3xTg-AD mice. PMID:28392767

Endogenous purines modulate K+ -evoked ACh secretion at the mouse neuromuscular junction.

PubMed

Guarracino, Juan F; Cinalli, Alejandro R; Veggetti, Mariela I; Losavio, Adriana S

2018-06-01

At the mouse neuromuscular junction, adenosine triphosphate (ATP) is co-released with the neurotransmitter acetylcholine (ACh), and once in the synaptic cleft, it is hydrolyzed to adenosine. Both ATP/adenosine diphosphate (ADP) and adenosine modulate ACh secretion by activating presynaptic P2Y 13 and A 1 , A 2A , and A 3 receptors, respectively. To elucidate the action of endogenous purines on K + -dependent ACh release, we studied the effect of purinergic receptor antagonists on miniature end-plate potential (MEPP) frequency in phrenic diaphragm preparations. At 10 mM K + , the P2Y 13 antagonist N-[2-(methylthio)ethyl]-2-[3,3,3-trifluoropropyl]thio-5'-adenylic acid, monoanhydride with (dichloromethylene)bis[phosphonic acid], tetrasodium salt (AR-C69931MX) increased asynchronous ACh secretion while the A 1 , A 3 , and A 2A antagonists 8-cyclopentyl-1,3-dipropylxanthine (DPCPX), (3-Ethyl-5-benzyl-2-methyl-4-phenylethynyl-6-phenyl-1, 4-(±)-dihydropyridine-3,5-, dicarboxylate (MRS-1191), and 2-(2-Furanyl)-7-(2-phenylethyl)-7H-pyrazolo[4,3-e][1,2,4]triazolo[1,5-c]pyrimidin-5-amine (SCH-58261) did not modify neurosecretion. The inhibition of equilibrative adenosine transporters by S-(p-nitrobenzyl)-6-thioinosine provoked a reduction of 10 mM K + -evoked ACh release, suggesting that the adenosine generated from ATP is being removed from the synaptic space by the transporters. At 15 and 20 mM K + , endogenous ATP/ADP and adenosine bind to inhibitory P2Y 13 and A 1 and A 3 receptors since AR-C69931MX, DPCPX, and MRS-1191 increased MEPP frequency. Similar results were obtained when the generation of adenosine was prevented by using the ecto-5'-nucleotidase inhibitor α,β-methyleneadenosine 5'-diphosphate sodium salt. SCH-58261 only reduced neurosecretion at 20 mM K + , suggesting that more adenosine is needed to activate excitatory A 2A receptors. At high K + concentration, the equilibrative transporters appear to be saturated allowing the accumulation of adenosine in the synaptic cleft. In conclusion, when motor nerve terminals are depolarized by increasing K + concentrations, the ATP/ADP and adenosine endogenously generated are able to modulate ACh secretion by sequential activation of different purinergic receptors. © 2018 Wiley Periodicals, Inc.

Activation of adenosine low-affinity A3 receptors inhibits the enteric short interplexus neural circuit triggered by histamine.

PubMed

Bozarov, Andrey; Wang, Yu-Zhong; Yu, Jun Ge; Wunderlich, Jacqueline; Hassanain, Hamdy H; Alhaj, Mazin; Cooke, Helen J; Grants, Iveta; Ren, Tianhua; Christofi, Fievos L

2009-12-01

We tested the novel hypothesis that endogenous adenosine (eADO) activates low-affinity A3 receptors in a model of neurogenic diarrhea in the guinea pig colon. Dimaprit activation of H2 receptors was used to trigger a cyclic coordinated response of contraction and Cl(-) secretion. Contraction-relaxation was monitored by sonomicrometry (via intracrystal distance) simultaneously with short-circuit current (I(sc), Cl(-) secretion). The short interplexus reflex coordinated response was attenuated or abolished by antagonists at H2 (cimetidine), 5-hydroxytryptamine 4 receptor (RS39604), neurokinin-1 receptor (GR82334), or nicotinic (mecamylamine) receptors. The A1 agonist 2-chloro-N(6)-cyclopentyladenosine (CCPA) abolished coordinated responses, and A1 antagonists could restore normal responses. A1-selective antagonists alone [8-cyclopentyltheophylline (CPT), 1,3-dipropyl-8-(2-amino-4-chlorophenyl)xanthine (PACPX), or 8-cyclopentyl-N(3)-[3-(4-(fluorosulfonyl)benzoyloxy)propyl]-xanthine (FSCPX)] caused a concentration-dependent augmentation of crypt cell secretion or contraction and acted at nanomolar concentrations. The A3 agonist N(6)-(3-iodobenzyl)-adenosine-5'-N-methyluronamide (IB-MECA) abolished coordinated responses and the A3 antagonist 3-ethyl-5-benzyl-2-methyl-4-phenylethynyl-6-phenyl-1,4-(+/-)-dihydropyridine-3,5-dicarboxylate (MRS1191) could restore and further augment responses. The IB-MECA effect was resistant to knockdown of adenosine A1 receptor with the irreversible antagonist FSCPX; the IC(50) for IB-MECA was 0.8 microM. MRS1191 alone could augment or unmask coordinated responses to dimaprit, and IB-MECA suppressed them. MRS1191 augmented distension-evoked reflex I(sc) responses. Adenosine deaminase mimicked actions of adenosine receptor antagonists. A3 receptor immunoreactivity was differentially expressed in enteric neurons of different parts of colon. After tetrodotoxin, IB-MECA caused circular muscle relaxation. The data support the novel concept that eADO acts at low-affinity A3 receptors in addition to high-affinity A1 receptors to suppress coordinated responses triggered by immune-histamine H2 receptor activation. The short interplexus circuit activated by histamine involves adenosine, acetylcholine, substance P, and serotonin. We postulate that A3 receptor modulation may occur in gut inflammatory diseases or allergic responses involving mast cell and histamine release.

Activation of adenosine low-affinity A3 receptors inhibits the enteric short interplexus neural circuit triggered by histamine

PubMed Central

Bozarov, Andrey; Wang, Yu-Zhong; Yu, Jun Ge; Wunderlich, Jacqueline; Hassanain, Hamdy H.; Alhaj, Mazin; Cooke, Helen J.; Grants, Iveta; Ren, Tianhua

2009-01-01

We tested the novel hypothesis that endogenous adenosine (eADO) activates low-affinity A3 receptors in a model of neurogenic diarrhea in the guinea pig colon. Dimaprit activation of H2 receptors was used to trigger a cyclic coordinated response of contraction and Cl− secretion. Contraction-relaxation was monitored by sonomicrometry (via intracrystal distance) simultaneously with short-circuit current (Isc, Cl− secretion). The short interplexus reflex coordinated response was attenuated or abolished by antagonists at H2 (cimetidine), 5-hydroxytryptamine 4 receptor (RS39604), neurokinin-1 receptor (GR82334), or nicotinic (mecamylamine) receptors. The A1 agonist 2-chloro-N6-cyclopentyladenosine (CCPA) abolished coordinated responses, and A1 antagonists could restore normal responses. A1-selective antagonists alone [8-cyclopentyltheophylline (CPT), 1,3-dipropyl-8-(2-amino-4-chlorophenyl)xanthine (PACPX), or 8-cyclopentyl-N3-[3-(4-(fluorosulfonyl)benzoyloxy)propyl]-xanthine (FSCPX)] caused a concentration-dependent augmentation of crypt cell secretion or contraction and acted at nanomolar concentrations. The A3 agonist N6-(3-iodobenzyl)-adenosine-5′-N-methyluronamide (IB-MECA) abolished coordinated responses and the A3 antagonist 3-ethyl-5-benzyl-2-methyl-4-phenylethynyl-6-phenyl-1,4-(±)-dihydropyridine-3,5-dicarboxylate (MRS1191) could restore and further augment responses. The IB-MECA effect was resistant to knockdown of adenosine A1 receptor with the irreversible antagonist FSCPX; the IC50 for IB-MECA was 0.8 μM. MRS1191 alone could augment or unmask coordinated responses to dimaprit, and IB-MECA suppressed them. MRS1191 augmented distension-evoked reflex Isc responses. Adenosine deaminase mimicked actions of adenosine receptor antagonists. A3 receptor immunoreactivity was differentially expressed in enteric neurons of different parts of colon. After tetrodotoxin, IB-MECA caused circular muscle relaxation. The data support the novel concept that eADO acts at low-affinity A3 receptors in addition to high-affinity A1 receptors to suppress coordinated responses triggered by immune-histamine H2 receptor activation. The short interplexus circuit activated by histamine involves adenosine, acetylcholine, substance P, and serotonin. We postulate that A3 receptor modulation may occur in gut inflammatory diseases or allergic responses involving mast cell and histamine release. PMID:19808660

Multifunctional, High-Temperature Nanocomposites

NASA Technical Reports Server (NTRS)

Connell, John W.; Smith, Joseph G.; Siochi, Emilie J.; Working, Dennis C.; Criss, Jim M.; Watson, Kent A.; Delozier, Donavon M.; Ghose, Sayata

2007-01-01

In experiments conducted as part of a continuing effort to incorporate multifunctionality into advanced composite materials, blends of multi-walled carbon nanotubes and a resin denoted gPETI-330 h (wherein gPETI h is an abbreviation for gphenylethynyl-terminated imide h) were prepared, characterized, and fabricated into moldings. PETI-330 was selected as the matrix resin in these experiments because of its low melt viscosity (<10 poise at a temperature of 280 C), excellent melt stability (lifetime >2 hours at 280 C), and high temperature performance (>1,000 hours at 288 C). The multi-walled carbon nanotubes (MWCNTs), obtained from the University of Kentucky, were selected because of their electrical and thermal conductivity and their small diameters. The purpose of these experiments was to determine the combination of thermal, electrical, and mechanical properties achievable while still maintaining melt processability. The PETI-330/MWCNT mixtures were prepared at concentrations ranging from 3 to 25 weight-percent of MWCNTs by dry mixing of the constituents in a ball mill using zirconia beads. The resulting powders were characterized for degree of mixing and thermal and rheological properties. The neat resin was found to have melt viscosity between 5 and 10 poise. At 280 C and a fixed strain rate, the viscosity was found to increase with time. At this temperature, the phenylethynyl groups do not readily react and so no significant curing of the resin occurred. For MWCNT-filled samples, melt viscosity was reasonably steady at 280 C and was greater in samples containing greater proportions of MWCNTs. The melt viscosity for 20 weightpercent of MWCNTs was found to be .28,000 poise, which is lower than the initial estimated allowable maximum value of 60,000 poise for injection molding. Hence, MWCNT loadings of as much as 20 percent were deemed to be suitable compositions for scale-up. High-resolution scanning electron microscopy (HRSEM) showed the MWCNTs to be well dispersed in the polymer matrices, while high-resolution transmission electron microscopy shows splits in the walls of the MWCNTs but no catastrophic breakage of tubes. To further assess processing characteristics prior to scale-up, samples containing 10, 15, and 20 weight-percent of MWCNTs were processed through a laboratory melting extruder. HRSEM of the extruded fibers shows significant alignment of MWCNTs in the flow direction (see figure). For the samples containing 20 weight-percent of MWCNTs, difficulties were encountered during feeding, and the temperature of a rotor in the extruder rose to 245 C because of buildup of frictional heat; this indicates that materials of this type having MWCNT concentrations .20 weight- percent may not be melt-processable. On the basis of the results from the foregoing characterizations, samples containing 10, 15, and 20 weight-percent of MWCNTs were scaled up to masses of .300 g and used to make specimens having dimensions of 10.2 by 15.2 by 0.32 cm. These specimens were molded by (1) injecting the mixtures, at temperatures between 260 and 280 C, into a tool made of the low-thermal-expansion alloy InvarR and then (2) curing for 1 hour at 371 C. The tool was designed to impart shear during the injection process in an attempt to achieve some alignment of the MWCNTs in the flow direction.

Magnetic colloidal superparticles of Co, Mn and Ni ferrite featured with comb-type and/or linear amphiphilic polyelectrolytes; NMR and MRI relaxometry.

PubMed

Menelaou, Melita; Iatridi, Zacharoula; Tsougos, Ioannis; Vasiou, Katerina; Dendrinou-Samara, Catherine; Bokias, Georgios

2015-06-28

The ability to encapsulate hydrophobic ferrites in colloidal superparticle structures of an a-telechelic hexadecyl-functionalized poly(methacrylic acid) (C16H33-PMAA) polymer with a linear architecture was investigated and compared with that of two amphiphilic comb-type water-soluble copolymers, namely, P(ANa-co-DAAm) and P(MANa-co-DMA), which are comprised of a poly(sodium acrylate) or poly(sodium methacrylate) backbone and pendent dodecyl acrylamide or dodecyl methacrylate chains, respectively. In the case of C16H33-PMAA, the pH-sensitive self-assembly behavior, which was studied through Nile Red probing and TEM, was related to its encapsulation properties. Hydrophobic MFe2O4 nanoparticles coated with oleylamine (MFe2O4@OAm MNPs, where M = Co, Mn, Ni) with a similar shape and size (∼9 nm) and magnetization values of 87.4, 63.1 and 55.0 emu g(-1) for CoFe2O4@OAm, MnFe2O4@OAm and NiFe2O4@OAm, respectively, were successfully encapsulated into the hydrophobic cores of spherical micellar structures formed by the copolymers in an aqueous solution through a solvent mixing procedure. The synthesized magnetic colloidal superparticles fell in the static dephasing regime (SDR). NMR relaxivity measurements of MFe2O4@P(ANa-co-DAAm), MFe2O4@P(MANa-co-DMA) and MFe2O4@C16H33-PMAA at pH = 4.5 and pH = 7 (where M = Co, Mn, Ni) at 11.7 T were recorded and the transverse relaxivity (r2) (mM(-1) s(-1)) was determined. Among all, the CoFe2O4@polymers demonstrated the highest r2 relaxivity values, ranging from 61.6 for CoFe2O4@C16H33-PMAA (pH = 7) to 316.0 mM(-1) s(-1) for CoFe2O4@P(ANa-co-DAAm). The relaxation efficiency (r1 and r2) of CoFe2O4@P(ANa-co-DAAm) was investigated further by magnetic resonance imaging (MRI) at 1.5 T and 3 T and the r2/r1 ratios were found to be 16.5 and 18.2, respectively, indicating its potential use as a T2 contrast agent.

New polymeric precursors to SiNCB, BN, and La(3)Ni(2)B(2)N(3) materials

NASA Astrophysics Data System (ADS)

Wideman, Thomas W.

Boron-containing non-oxide ceramics demonstrate a number of important structural, electronic and physical properties. However, the lack of general synthetic routes to generate these materials with controlled composition, under moderate conditions, and in processed forms, has hampered both scientific studies and practical applications. The goal of the work described in this dissertation was to develop efficient new polymeric precursor routes to boron-containing materials including SiNCB ceramics composites, boron nitride fibers, and quaternary metal boro-nitride superconductors. Two types of polyborosilazane precursors to SiNCB ceramics were developed. Borazine-co-silazane copolymers were prepared through the thermal copolymerization of borazine with two silazanes, tris(trimethylsilylamino)silane, and 1,1,3,3,5,5 -hexamethylcyclotrisilazane. Polyborosilazanes with pendent boron-containing species were obtained by the modification of preformed hydridopolysilazane polymers with three monofunctional boranes: pinacolborane, 2,4-diethylborazine and 1,3-dimethyl-1,3-diaza-2-boracyclopentane. Pyrolyses of both types of polyborosilazanes produced SiNCB ceramics with controllable boron contents, enhanced thermal stabilities, and reduced crystallinity. Processible polymeric precursors to BN were also achieved by the chemical modification of polyborazylene, (Bsb3Nsb3Hsb{˜ 4}rbrack sb{x}, with diethylamine, dipentylamine, and hexamethyldisilazane. The modified polymers, unlike the parent polyborazylene, do not crosslink at low temperatures, and therefore proved to be ideal melt-spinnable precursors to BN ceramic fibers. A new polymeric precursor route to the recently discovered Lasb3Nisb2Bsb2Nsb3 superconductor (Tc = 12K) was developed by reacting lanthanum and nickel powders dispersed in the polyborazylene, to produce the intermetallic in excellent yields. The use of the polymer as a "reagent" provided a controllable, solid state source of nitrogen, and allows for the large scale syntheses of Lasb3Nisb2Bsb2Nsb3 and other quaternary metal boro-nitrides. Two new preparations of borazine, Bsb3Nsb3Hsb6, a key molecular unit in many of the polymers described above, have also been developed. Chemical investigations and practical applications of borazine-based preceramic polymers have been limited by the inefficient syntheses and high cost of borazine, which may now be prepared in 55-65% yields by the convenient, inexpensive the reaction of ammonium and borohydride salts, and the decomposition of ammonia borane, in high-boiling ether solutions.

Sport-Specific Motor Fitness Tests in Water Polo: Reliability, Validity and Playing Position Differences

PubMed Central

Uljevic, Ognjen; Spasic, Miodrag; Sekulic, Damir

2013-01-01

Sport-specific motor fitness tests are not often examined in water polo. In this study we examined the reliability, factorial and discriminative validity of 10 water-polo-specific motor-fitness tests, namely: three tests of in-water jumps (thrusts), two characteristic swimming sprints (10 and 20 metres from the water start), three ball-throws (shoots), one test of passing precision (accuracy), and a test of the dynamometric force produced while using the eggbeater kick. The sample of subjects consisted of 54 young male water polo players (15 to 17 years of age; 1.86 ± 0.07 m, and 83.1 ± 9.9 kg). All tests were applied over three testing trials. Reliability analyses included Cronbach Alpha coefficients (CA), inter-item- correlations (IIR) and coefficients of the variation (CV), while an analysis of variance was used to define any systematic bias between the testing trials. All tests except the test of accuracy (precision) were found to be reliable (CA ranged from 0.83 to 0.97; IIR from 0.62 to 0.91; CV from 2% to 21%); with small and irregular biases between the testing trials. Factor analysis revealed that jumping capacities as well as throwing and sprinting capacities should be observed as a relatively independent latent dimensions among young water polo players. Discriminative validity of the applied tests is partially proven since the playing positions significantly (p < 0.05) differed in some of the applied tests, with the points being superior in their fitness capacities in comparison to their teammates. This study included players from one of the world’s best junior National leagues, and reported values could be used as fitness standards for such an age. Further studies are needed to examine the applicability of the proposed test procedures to older subjects and females. Key Points Here presented and validated sport specific water polo motor fitness tests are found to be reliable in the sample of young male water polo players. Factor analysis revealed existence of three inde-pendent latent motor dimensions, namely, in-water jumping capacity, throwing ability, and sprint swimming capacity. Points are found to be most advanced in their fitness capacities which are mainly related to their game duties which allowed them to develop variety of fit-ness components. PMID:24421723

Deciphering the Effect of Polymer-Assisted Doping on the Optoelectronic Properties of Block Copolymer-Anchored Graphene Oxide.

PubMed

Maity, Nabasmita; Kuila, Atanu; Nandi, Arun K

2017-02-14

Doping facilitates the tuning of band gap, providing an opportunity to tailor the optoelectronic properties of graphene in a simple way, and polymer-assisted doping is a new route to combine the optoelectronic properties of graphene with the properties of a polymer. In this endeavor, a linear diblock copolymer, polycaprolactone-block-poly(dimethyl aminoethyl methacrylate) (PCL 13 -b-PDMAEMA 117 ) (GPCLD) is grafted from the graphene oxide (GO) surface via consecutive ring opening and atom transfer radical polymerization. GPCLD is characterized using proton nuclear magnetic resonance ( 1 H NMR), Fourier transform infrared spectroscopy, atomic force microscopy, thermogravimetric analysis, X-ray photoelectron spectroscopy, and Raman spectroscopy. The phase transition behavior of the GPCLD solution with varying temperature and pH is monitored using fluorescence spectroscopy and dynamic light scattering. Temperature-dependent 1 H NMR spectra at pH 9.2 indicate the influence of temperature on the interaction between GPCLD and solvent (water) molecules causing the phase separation. Fluorescence spectra at pH 4 and 9.2 give the evidence of localized p- and n-type doping of graphene assisted by the pendent PDMAEMA chains. In the impedance spectra of GPCLD films, the Nyquist plots vary with pH; at pH 4, they exhibit a semicircle at higher frequencies and a spike at lower frequencies; at pH 7.0, the spike is replaced by an arc; and at pH 9.2, the semicircle at higher frequencies vanishes and only a spike is noticed, all of these suggesting different types of doping of graphene at different pH values. The dc-conductivity also varies with pH and temperature because of the different types of doping. The current (I)-voltage (V) property of GPCLD at different pH values is very unique: at pH 9.2, an interesting feature of negative differential resistance (NDR) is observed; at pH 7, the rectification property is observed; and at pH 4, again the NDR property is observed. The temperature-dependent I-V property at pH 7 and 9.2 clearly indicates a signature of doping, dedoping, and redoping because of the change in the interaction of GO with the grafted polymer arising from coiling and decoiling of polymer chains.

L’évaluation du risque cardiaque avant l’utilisation de stimulants chez les enfants et les adolescents

PubMed Central

Bélanger, SA; Warren, AE; Hamilton, RM; Gray, C; Gow, RM; Sanatani, S; Côté, J-M; Lougheed, J; LeBlanc, J; Martin, S; Miles, B; Mitchell, C; Gorman, DA; Weiss, M; Schachar, R

2009-01-01

Les décisions en matière de réglementation et les documents scientifiques au sujet de la prise en charge du trouble de déficit de l’attention avec hyperactivité (TDAH) soulèvent des questions quant à l’innocuité des médicaments et à l’évaluation convenable à effectuer avant le traitement afin de déterminer la pertinence d’une pharmacothérapie. Ce constat est particulièrement vrai en présence de cardiopathies structurelles ou fonctionnelles. Le présent article contient l’analyse des données disponibles, y compris les publications révisées par des pairs, des données tirées du site Web de la Food and Drug Administration des États-Unis au sujet des réactions indésirables déclarées chez des enfants qui prennent des stimulants, ainsi que des données de Santé Canada sur le même problème. Des lignes directrices consensuelles sur l’évaluation pertinente sont proposées d’après l’apport des membres de la Société canadienne de pédiatrie, de la Société canadienne de cardiologie et de l’Académie canadienne de psychiatrie de l’enfant et de l’adolescent, qui possèdent notamment des compétences et des connaissances précises tant dans le secteur du TDAH que de la cardiologie pédiatrique. Le présent document de principes prône une anamnèse et un examen physique détaillés avant la prescription de stimulants et s’attarde sur le dépistage des facteurs de risque de mort subite, mais il ne contient pas de recommandations systématiques de dépistage électrocardiographique ou de consultations avec un spécialiste en cardiologie, à moins que les antécédents ou que l’examen physique ne le justifient. Le document contient un questionnaire pour repérer les enfants potentiellement vulnérables à une mort subite (quel que soit le type de TDAH ou les médicaments utilisés pour le traiter). Même si les recommandations dépendent des meilleures données probantes disponibles, le comité s’entend pour affirmer que d’autres recherches s’imposent pour optimiser l’approche de ce scénario clinique courant.

La stimulation magnétique transcrânienne (SMT) dans la recherche fondamentale et clinique en neuroscience

PubMed Central

Valero-Cabré, Antoni; Pascual-Leone, Alvaro; Coubard, Olivier A.

2011-01-01

Introduction Les méthodes de stimulation cérébrale non invasives telles que la Stimulation Magnétique Transcrânienne (SMT) sont largement utilisées pour établir des inférences causales sur les relations entre cerveau et comportement. Des applications cliniques basées sur la SMT ont également été développées pour traiter des affections neurologiques ou psychiatriques comme la dépression, la dystonie, la douleur, les acouphènes ou les séquelles d’accident vasculaire cérébral. État des connaissances La SMT fonctionne en induisant de manière non invasive et de manière focale des courants électriques dans des régions corticales, modulant ainsi leur niveau d’activité de façon variable suivant la fréquence, le nombre d’impulsions, les intervalles et la durée de stimulation utilisés. S’agissant du cortex moteur, on sait par exemple que les patterns d’impulsions de SMT à basse fréquence ou ceux délivrées de manière continue tendent à déprimer l’activité locale, tandis que la SMT à haute fréquence et discontinus tend à la potentialiser. Outre ses effets locaux, la SMT peut aussi avoir des effets à distance sur les régions cérébrales, véhiculés par les connections anatomiques et qui dépendent de l’efficacité et du signe de ces connexions. Perspectives Dans le domaine de la recherche fondamentale et des applications thérapeutiques, l’utilisation efficace de la SMT requiert, cependant, la compréhension approfondie de ses principes opérationnels, de ses risques, de ses potentialités et de ses limites. Dans cet article, nous présentons les principes par lesquels opèrent les méthodes de stimulation cérébrale non invasive, et en particulier la SMT. Conclusion À l’issue de sa lecture, le lecteur sera en mesure de discuter de façon critique les études scientifiques et cliniques utilisant la SMT, ainsi que de concevoir des applications SMT suivant une hypothèse a priori dans le domaine de la recherche en neuroscience fondamentale et/ou clinique. PMID:21420698

Development of hydrogen gas getters for TRU waste

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kaszuba, J. P.; Mroz, E. J.; Peterson, E.

2004-01-01

Alpha radiolysis of hydrogenous waste and packaging materials generates hydrogen gas in radioactive storage containers. For this reason, the flammable gas (hydrogen) concentration in waste shipment containers (Transuranic Package Transporter-II or TP-II containers) is limited to the lower explosion limit of hydrogen in air (5 vol%). The use of hydrogen getters is being investigated to prevent the build up of hydrogen during storage and transport of the TP-II containers (up to 60 days). Preferred hydrogen getters are solid materials that scavenge hydrogen from the gas phase and chemically and irreversibly bind it in the solid state. One proven getter, 1,4-bis(phenylethynyl)benzenemore » or DEB, belongs to a class of compounds called alkynes, which are characterized by the presence of carbon-carbon triple bonds. These carbon atoms will, in the presence of suitable catalysts such as palladium, irreversibly react with hydrogen to form the corresponding saturated alkane compounds. Because DEB contains two triple bonds, one mole of DEB reacts with 4 moles of hydrogen. The standard formulation for the 'DEB getter' is a mixture of 75% DEB and 25% carbon catalyst (5% palladium on carbon). Certain chemicals such as volatile organic compounds (VOCs) are known to 'poison' and reduce the activity of the catalyst. Therefore, in addition to the standard formulation, a semi-permeable barrier that encapsulates and protects the getter and its catalyst from poisons was also developed. The uncoated and polymer coated getter formulations were subjected to tests that determined the performance of the getters with regard to capacity, operating temperature range (with hydrogen in nitrogen and in air), hydrogen concentration, poisons, aging, pressure, reversibility, and radiation effects. This testing program was designed to address the following performance requirements: (1) Minimum rate for hydrogen removal of 1.2E-5 moles hydrogen per second for 60 days; (2) Sufficient getter material within the TP-II to ensure that no more than 50% of getter material is consumed during the 60 days; and (3) Adequate hydrogen removal rate from the getter reaction in the absence of the recombination reaction of hydrogen to produce water. This conservative approach provides a measure of safety for waste shipments by ensuring that sufficient getter material is present and by not taking credit for the recombination reaction. The rationale for measuring and reporting the hydrogen removal rate at 50% getter capacity is thus derived. All of the coated getters as well as the uncoated DEB performed well above the performance requirements. Coating the DEB with polymers did not significantly enhance getter performance in the presence of poisons relative to uncoated DEB. The next phase of the project is to evaluate a scaled-up getter package for performance under waste shipping conditions anticipated in the TP-II.« less

Hippocampal neuronal cells that accumulate α-synuclein fragments are more vulnerable to Aβ oligomer toxicity via mGluR5 – implications for dementia with Lewy bodies

PubMed Central

2014-01-01

Background In dementia with Lewy bodies (DLB) abnormal interactions between α-synuclein (α-syn) and beta amyloid (Aβ) result in selective degeneration of neurons in the neocortex, limbic system and striatum. However, factors rendering these neurons selectively vulnerable have not been fully investigated. The metabotropic glutamate receptor 5 (mGluR5) has been shown to be up regulated in DLB and might play a role as a mediator of the neurotoxic effects of Aβ and α-syn in vulnerable neuronal populations. In this context, the main objective of the present study was to investigate the role of mGluR5 as a mediator of the neurotoxic effects of α-syn and Aβ in the hippocampus. Results We generated double transgenic mice over-expressing amyloid precursor protein (APP) and α-syn under the mThy1 cassette and investigated the relationship between α-syn cleavage, Aβ, mGluR5 and neurodegeneration in the hippocampus. We found that compared to the single tg mice, the α-syn/APP tg mice displayed greater accumulation of α-syn and mGluR5 in the CA3 region of the hippocampus compared to the CA1 and other regions. This was accompanied by loss of CA3 (but not CA1) neurons in the single and α-syn/APP tg mice and greater loss of MAP 2 and synaptophysin in the CA3 in the α-syn/APP tg. mGluR5 gene transfer using a lentiviral vector into the hippocampus CA1 region resulted in greater α-syn accumulation and neurodegeneration in the single and α-syn/APP tg mice. In contrast, silencing mGluR5 with a lenti-shRNA protected neurons in the CA3 region of tg mice. In vitro, greater toxicity was observed in primary hippocampal neuronal cultures treated with Aβ oligomers and over-expressing α-syn; this effect was attenuated by down-regulating mGluR5 with an shRNA lentiviral vector. In α-syn-expressing neuronal cells lines, Aβ oligomers promoted increased intracellular calcium levels, calpain activation and α-syn cleavage resulting in caspase-3-dependent cell death. Treatment with pharmacological mGluR5 inhibitors such as 2-Methyl-6-(phenylethynyl)pyridine (MPEP) and 3-((2-Methyl-4-thiazolyl)ethynyl)pyridine (MTEP) attenuated the toxic effects of Aβ in α-syn-expressing neuronal cells. Conclusions Together, these results support the possibility that vulnerability of hippocampal neurons to α-syn and Aβ might be mediated via mGluR5. Moreover, therapeutical interventions targeting mGluR5 might have a role in DLB. PMID:24885390

Carbon nanotube composites prepared by ultrasonically assisted twin screw extrusion

NASA Astrophysics Data System (ADS)

Lewis, Todd

Two ultrasonic twin screw extrusion systems were designed and manufactured for the ultrasonic dispersion of multi-walled carbon nanotubes in viscous polymer matrices at residence times of the order of seconds in the ultrasonic treatment zones. The first design consisted of an ultrasonic slit die attachment in which nanocomposites were treated. A second design incorporated an ultrasonic treatment section into the barrel of the extruder to utilize the shearing of the polymer during extrusion while simultaneously applying treatment. High performance, high temperature thermoset phenylethynyl terminate imide oligomer (PETI-330) and two different polyetherether ketones (PEEK) were evaluated at CNT loadings up to 10 wt%. The effects of CNT loading and ultrasonic amplitude on the processing characteristics and rheological, mechanical, electrical, thermal and morphological properties of nanocomposites were investigated. PETI and PEEK nanocomposites showed a decrease in resistivity, an increase in modulus and strength and a decrease in strain at break and toughness with increased CNT loading. Ultrasonically treated samples showed a decrease in die pressure and extruder torque with increasing ultrasonic treatment and an increase in complex viscosity and storage modulus at certain ultrasonic treatment levels. Optical microscopy showed enhanced dispersion of the CNT bundles in ultrasonically treated samples. However, no significant improvement of mechanical properties was observed with ultrasonic treatment due to lack of adhesion between the CNT and matrix in the solid state. A curing model for PETI-330 was proposed that includes the induction and curing stages to predict the degree of cure of PETI-330 under non-isothermal conditions. Induction time parameters, rate constant and reaction order of the model were obtained based on differential scanning calorimetry (DSC) data. The model correctly predicted experimentally measured degrees of cure of compression molded plaques cured to various degrees. An apparatus for high temperature resin transfer molding (HT-RTM) was designed and built to produce PETI-8 and PETI-330/carbon fabric composite panels. Performance of the panels was tested at various temperatures. The produced panels exhibited low void content in wetted areas and had higher short beam shear properties in comparison with vacuum assisted resin transfer moldings. To investigate the environmental aspects of nanomaterials, a testing apparatus was designed and manufactured to study the effectiveness of particulate respirators at filtering CNTs. Three different grades of respirators were evaluated for their effectiveness to prevent the inhalation of CNTs. Dust masks, commonly used in a processing environment, were found to be highly ineffective at preventing the inhalation of CNTs. However, respirators with a National Institute for Occupational Safety and Health (NIOSH) rating of P95 or greater were shown to prevent the inhalation of CNTs under normal breathing conditions.

Formation des etoiles massives dans les galaxies spirales

NASA Astrophysics Data System (ADS)

Lelievre, Mario

Le but de cette thèse est de décrire la formation des étoiles massives dans les galaxies spirales appartenant à divers types morphologiques. L'imagerie Hα profonde combinée à une robuste méthode d'identification des régions HII ont permis de détecter et de mesurer les propriétés (position, taille, luminosité, taux de formation d'étoiles) de plusieurs régions HII situées dans le disque interne (R < R25) de dix galaxies mais aussi à leur périphérie (R ≥ R 25). De façon générale, la répartition des régions HII ne montre aucune évidence de structure morphologique à R < R25 (bras spiraux, anneau, barre) à moins de limiter l'analyse aux régions HII les plus grosses ou les plus lumineuses. La répartition des régions HII, de même que leur taille et leur luminosité, sont toutefois sujettes à de forts effets de sélection qui dépendent de la distance des galaxies et qu'il faut corriger en ramenant l'échantillon à une résolution spatiale commune. Les fonctions de luminosité montrent que les régions HII les plus brillantes ont tendance à se former dans la portion interne du disque. De plus, l'analyse des pentes révèle une forte corrélation linéaire par rapport au type morphologique. Aucun pic n'est observé dans les fonctions de luminosité à log L-37 qui révèlerait la transition entre les régions HII bornées par l'ionisation et par la densité. Une relation cubique est obtenue entre la taille et la luminosité des régions HII, cette relation variant toutefois de façon significative entre le disque interne et la périphérie d'une même galaxie. La densité et la dynamique du gaz et des étoiles pourraient influencer de façon significative la stabilité des nuages moléculaires face à l'effondrement gravitationnel. D'une part, l'étendue du disque de régions HII pour cinq galaxies de l'échantillon coïncide avec celle de l'hydrogène atomique. D'autre part, en analysant la stabilité des disques galactiques, on conclue qu'en incluant la densité des étoiles vieilles présentes, on arrive à mieux contraindre le rayon à partir duquel aucune formation d'étoiles ne devrait se produire dans les galaxies.

Reproductive ecology of tundra swans on the Arctic National Wildlife Refuge, Alaska

USGS Publications Warehouse

Monda, Matthew J.; Ratti, John T.; McCabe, Thomas R.

1994-01-01

Management of tundra swans (Cygnus columbianus) is hampered by a lack of information on their nesting and brood-rearing ecology. We studied tundra swan nesting and brood-rearing ecology on the Arctic National Wildlife Refuge (ANWR), Alaska, 1988-90. Nest success was 58% (n = 31) in 1988, 83% (n = 36) in 1989, 84% (n = 43) in 1990, and 76% (n = 110) for the 3 years. Nests were located predominately in marshes dominated by sheathed pondweed (Potamogeton vaginatus), mare's tail (Hippuris vulgaris), and Hoppner sedge (Carex subspathacea), or by pendent grass (Arctophila fulva), water sedge (C. aquatilis), and tall cotton grass (Eriophorum angustifolium). Nests were seldom located in upland or partially vegetated habitats and were near coastal lagoons or large coastal lakes. Incubating swans were easily disturbed by ground observers and left their nests when we were 500-2,000 m from the nest. Swans did not cover eggs with nest material prior to departure; thus, eggs were vulnerable to avain predation and thermal stress. Brood-foraging sites on the Kongakut Delta (n = 41) were frequently in aquatic-marsh (59%) and saline graminoid-shrub (29%) habitats, occasionally in graminoid-marsh (7%) and partially vegetated (5%) habitats, and absent from upland, graminoid-shrub-water sedge, and graminoid-shrub-cotton grass habitats. Brood-foraging sites on the Canning Delta (n = 35) were frequently in graminoid-marsh (46%), graminoid-shrub-water sedge (26%), and aquatic-marsh (23%) habitats, occasionally in graminoid-shrub-cotton grass (3%) and upland habitats (3%), and absent from saline graminoid-shrub and partially vegetated habitats. Young cygnets grazed in terrestrial habitats more frequently than older broods on the Kongakut (P = 0.003) and Canning (P = 0.053) deltas. Wetlands with sheathed pondweed were uncommon but preferred by broods (P = 0.001). Using field experiments, we evaluated effects of swan grazing and fertilization from feces on aboveground biomass production and plant-species composition. Fertilization from swan feces did not have an overall effect (P = 0.991) or interact with clipping (simulated grazing with hand shears) (P = 0.881) for any response variable investigated. Clipping increased total vegetational biomass the year of clipping (P = 0.001), decreased biomass the year after clipping (P = 0.001), and increased total shoot densities (P = 0.017). Shoot densities after clipping increased for Hoppner sedge (P = 0.010), did not change for tundra grass (Dupontia fischeri) (P = 0.296), and decreased for chickweed (Dupontia fischeri) (P = 0.006). Traditional use of foraging sites may enhance grazing areas by increasing plant production the year of grazing and densities of plant species that tolerate grazing. Protection of aquatic-marsh, graminoid-marsh, and saline graminoid-shrub habitats, particularly those supporting sheathed pondweed and traditionally used nesting areas, is important for maintaining current swan populations on ANWR.

Modélisation de la dynamique de la chaîne peptidique des protéines en solution par RMN à travers les couplages dipolaires

NASA Astrophysics Data System (ADS)

Bouvignies, G.; Bernadó, P.; Blackledge, M.

2005-11-01

L'activité d'une protéine est liée non seulement à sa structure, mais également à sa dynamique, et il est important de connaître la nature de ses mouvements pour comprendre sa fonction biologique. La résonance magnétique nucléaire est particulièrement utile pour étudier la dynamique d'une molécule en solution sur une gamme de temps de corrélation très large. En particulière, la relaxation des spins 15N ou 13C donne accès aux mouvements moléculaires avec les temps caractéristiques entre les dizaines de picosecondes et le temps de corrélation rotationelle de la molécule (autour de 10ns pour une protéine monomérique de 20 kD à 300 K). Les vitesses de relaxation dépendent de la flexibilité de chaque site, et peuvent être caractérisé en termes d'amplitude et de temps caractéristique locale. La précision de ces paramètres et sa compréhension en termes de fonction exigent que la réorientation globale de la molécule soit correctement prise en compte. Ces méthodes expérimentales, qui seront présentées ici brièvement, font maintenant partie de la panoplie d'expériences appliquées dans l'étude de la relation structure-dynamique d'une protéine et ses partenaires. Néanmoins les mouvements plus lents, entre la nano et la milliseconde, sont plus difficiles à étudier, et il y a très peu d'information disponible sur la nature de la dynamique de la chaîne peptidique dans cette gamme de temps par RMN. Très récemment de nouvelles méthodologies ont été proposées, basées sur l'alignement préférentiel d'une protéine par rapport au champ magnétique, induit par dissolution de la molécule dans un cristal liquide très dilué. Dans ces conditions les changements conformationels sur des temps caractéristique plus lents (jusqu'au millisecondes) peuvent être étudiés. Nous présenterons cette technique, et quelques résultats, comparant la dynamique rapide (ps-ns), et plus lente le long de la chaîne peptidique de quatre protéines.

Inorganic-organic electrolyte materials for energy applications

NASA Astrophysics Data System (ADS)

Fei, Shih-To

This thesis research is devoted to the development of phosphazene-based electrolyte materials for use in various energy applications. Phosphazenes are inorganic-organic materials that provide unusal synthetic advantages and unique process features that make them useful in energy research. This particular thesis consists of six chapters and is focused on four specific aspects: lithium battery, solar cell, and fuel cell electrolytes, and artificial muscles. Chapter 1 is written as an introduction and review of phosphazene electrolytes used in energy applications. In this introduction the basic history and characteristics of the phosphazenes are discussed briefly, followed by examples of current and future applications of phosphazene electrolytes related to energy. Notes are included on how the rest of the chapters relate to previous work. Chapters 2 and 3 discuss the conductivity and fire safety of ethyleneoxy phosphazene gel electrolytes. The current highly flammable configurations for rechargeable lithium batteries generate serious safety concerns. Although commercial fire retardant additives have been investigated, they tend to decrease the overall efficiency of the battery. In these two chapters the discussion is focused on ionically conductive, non-halogenated lithium battery additives based on a methoxyethoxyethoxyphosphazene oligomer and the corresponding high polymer, both of which can increase the fire resistance of a battery while retaining a high energy efficiency. Conductivities in the range of 10 -4 Scm-1 have been obtained for self-extinguishing, ion-conductive methoxyethoxyethoxyphosphazene oligomers. The addition of 25 wt% high polymeric poly[bis(methoxyethoxyethoxy)phosphazene] to propylene carbonate electrolytes lowers the flammability by 90% while maintaining a good ionic conductivity of 2.5x10--3 Scm -1 Chapter 2 is focused more on the electrochemical properties of the electrolytes and how they compare to other similar materials, while Chapter 3 emphasizes the flammability studies. Chapter 4 expands the application of the ethyleneoxy phosphazene system to dye sensitized solar cell systems, and uses this material as a model for the study of electrode-electrolyte interfaces. We report here the results of our study on polymer electrolyte infiltration and its effect on dye-sensitized solar cells. In-depth studies have been made to compare the effects of different cell assembly procedures on the electrochemical properties as well as infiltration of electrolytes into various electrode designs. The first part of the study is based on the use of thermoplastic phosphazene electrolytes and how the overall fabrication procedure affects electrochemical performance, and the second is the use of cross-section microscopy to characterize the degree of electrolyte infiltration into various nanostructured titanium dioxide electrode surfaces. The results of this study should eventually improve the efficiency and longevity of thermally stable polymer dye solar cell systems. In Chapter 5 the effect of pendant polymer design on methanol fuel cell membrane performance was investigated. A synthetic method is described to produce a proton conductive polymer membrane with a polynorbornane backbone and inorganic-organic cyclic phosphazene pendent groups that bear sulfonic acid units. This hybrid polymer combines the inherent hydrophobicity and flexibility of the organic polymer with the tuning advantages of the cyclic phosphazene to produce a membrane with high proton conductivity and low methanol crossover at room temperature. The ion exchange capacity (IEC), the water swelling behavior of the polymer, and the effect of gamma radiation crosslinking were studied, together with the proton conductivity and methanol permeability of these materials. A typical membrane had an IEC of 0.329 mmolg-1 and had water swelling of 50 wt%. The maximum proton conductivity of 1.13x10 -4 Scm-1 at room temperature is less than values reported for some commercially available materials such as Nafion. However the average methanol permeability was around 10-9 cms-1, which is one hundred times smaller than the value for Nafion. Thus, the new polymers are candidates for low-temperature direct methanol fuel cell membranes. Finally, Chapter 6 focuses on the electroactivity of a mixed-substituent phosphazene electrolyte and its viability as an actuator material. We report here an electrochemically responsive polymer hydrogel based on ionic crosslinking. The crosslinking by metal cations and anionic carboxylic acid side groups can be controlled by redox reactions. The crosslinks dissociate when the cation crosslinker is reduced to a lower oxidation state and reform following oxidation, which leads to a reversible and localized swelling--contraction. By choosing biocompatible components and miniaturization designs, the system has potential in microrobotic and biomedical applications.

Conjugated Polymer Zwitterions: Efficient Interlayer Materials in Organic Electronics.

PubMed

Liu, Yao; Duzhko, Volodimyr V; Page, Zachariah A; Emrick, Todd; Russell, Thomas P

2016-11-15

Conjugated polymer zwitterions (CPZs) are neutral, hydrophilic, polymer semiconductors. The pendent zwitterions, viewed as side chain dipoles, impart solubility in polar solvents for solution processing, and open opportunities as interfacial components of optoelectronic devices, for example, between metal electrodes and organic semiconductor active layers. Such interlayers are crucial for defining the performance of organic electronic devices, e.g., field-effect transistors (OFETs), light-emitting diodes (OLEDs), and photovoltaics (OPVs), all of which consist of multilayer structures. The interlayers reduce the Schottky barrier height and thus improve charge injection in OFETs and OLEDs. In OPVs, the interlayers serve to increase the built-in electric potential difference (V bi ) across the active layer, ensuring efficient extraction of photogenerated charge carriers. In general, polar and even charged electronically active polymers have gained recognition for their ability to modify metal/semiconductor interfaces to the benefit of organic electronics. While conjugated polyelectrolytes (CPEs) as interlayer materials are well-documented, open questions remain about the role of mobile counterions in CPE-containing devices. CPZs possess the processing advantages of CPEs, but as neutral molecules lack any potential complications associated with counterions. The electronic implications of CPZs on metal electrodes stem from the orientation of the zwitterion dipole moment in close proximity to the metal surface, and the resultant surface-induced polarization. This generates an interfacial dipole (Δ) at the CPZ/metal interface, altering the work function of the electrode, as confirmed by ultraviolet photoelectron spectroscopy (UPS), and improving device performance. An ideal cathode interlayer would reduce electrode work function, have orthogonal processability to the active layer, exhibit good film forming properties (i.e., wettability/uniformity), prevent exciton quenching, possess optimal electron affinity that neither limits the work function reduction nor impedes the charge extraction, transport electrons selectively, and exhibit long-term stability. Our recent discoveries show that CPZs achieve many of these attributes, and are poised for further expansion and development in the interfacial science of organic electronics. This Account reviews a recent collaboration that began with the synthesis of CPZs and a study of their structural and electronic properties on metals, then extended to their application as interlayer materials for OPVs. We discuss CPZ structure-property relationships based on several material platforms, ranging from homopolymers to copolymers, and from materials with intrinsic p-type conjugated backbones to those with intrinsic n-type conjugated backbones. We discuss key components of such interlayers, including (i) the origin of work function reduction of CPZ interlayers on metals; (ii) the role of the frontier molecular orbital energy levels and their trade-offs in optimizing electronic and device properties; and (iii) the role of polymer conductivity type and the magnitude of charge carrier mobility. Our motivation is to present our prior use and current understanding of CPZs as interlayer materials in organic electronics, and describe outstanding issues and future potential directions.

Sulfur and Oxygen Isotopic Analysis of a Cosmic Symplectite from a Comet Wild 2 Stardust Terminal Particle

NASA Technical Reports Server (NTRS)

Nguyen, A. N.; Berger, E. L.; Nakamura-Messenger, K.; Messenger, S.

2015-01-01

Introduction: Analyses of comet 81P/Wild 2 samples re-turned from the Stardust mission have uncovered surprising simi-larities to meteoritic material, including the identification of inner solar system grains [1-3]. The TEM characterization of terminal particle (TP) 4 from Stardust track #147 revealed an assemblage consisting of symplectically intergrown pentlandite and nanocrys-talline maghemite coexisting with high-Ca pyroxene [4]. Mineral-ogically similar cosmic symplectites (COS) containing pentlandite and magnetite in the primitive Acfer 094 meteorite are highly de-pleted in 16O (?17O, ?18O 180 per mille) [5-7]. This isotopic signature is proposed to record alteration with primordial solar nebula water. Conversely, the normal O isotopic composition of the Stardust COS indicates alteration by a different aqueous reservoir, perhaps on the comet [8]. In this study, we analyzed the Wild 2 COS for S isotopes to further constrain its origin. Experimental: Thin sections of TP4 (12 ?m) were produced and their mineralogy was thoroughly characterized by TEM. Two of the sections were analyzed for O isotopes by isotopic imaging in the JSC NanoSIMS 50L. The sample in one of the slices was completely consumed. The remaining material in the adjacent slice was analyzed simultaneously for 16O, 32S, 33S, 34S, and 56Fe16O in electron multipliers using a Cs+ primary ion beam. Quasi-simulta-neous arrival (QSA) can have a significant effect on S isotopic ra-tios when using electron multipliers, resulting in undercounting of 32S [9]. Canyon Diablo troilite (CDT) was measured numerous times to deduce a correction factor for QSA and ensure measure-ment reproducibility. Isotopic ratios are reported relative to CDT. Results and Discussion: The Wild 2 COS is enriched in the heavy S isotopes relative to CDT (?33S = 6.5 +/- 1.6 per mille; ?34S = 5.1 +/- 0.7 per mille; 1?). The degree of 33S enrichment indicates mass-inde-pendent fractionation (MIF) with ?33S = 3.9 +/- 1.7 per mille. MIF of S has been observed in some chondrules (?33S up to 0.11per mille) [10], but this effect has not been identified in sulfides from carbonaceous chondrites [11] or IDPs [12]. S isotopic analysis of Stardust impact craters also did not reveal MIF or anomalies, save for one potential 32S-rich presolar sulfide [13]. Measurement errors on these impact craters were much larger than those in this study, however. MIF of S has been proposed to result from heterogeneities in the solar neb-ula from nucleosynthetic components [14] or photochemical irra-diation of solar nebula gas [10]. Presolar SiC grains are observed to have 32S enrichments [15, 16] contrary to the S isotopic compo-sition of the cometary COS. The S isotopic composition more likely reflects irradiation of nebular gas.

Catalysis Science Initiative: Catalyst Design by Discovery Informatics

DOE Office of Scientific and Technical Information (OSTI.GOV)

Delgass, William Nicholas; Abu-Omar, Mahdi; Caruthers, James

Catalysts selectively enhance the rates of chemical reactions toward desired products. Such reactions provide great benefit to society in major commercial sectors such as energy production, protecting the environment, and polymer products and thereby contribute heavily to the country’s gross national product. Our premise is that the level of fundamental understanding of catalytic events at the atomic and molecular scale has reached the point that more predictive methods can be developed to shorten the cycle time to new processes. The field of catalysis can be divided into two regimes: heterogeneous and homogeneous. For the heterogeneous catalysis regime, we have usedmore » the water-gas shift (WGS) reaction (CO + H2O + CO2 + H2O) over supported metals as a test bed. Detailed analysis and strong coupling of theory with experiment have led to the following conclusions: • The sequence of elementary steps goes through a COOH intermediate • The CO binding energy is a strong function of coverage of CO adsorbed on the surface in many systems • In the case of Au catalysts, the CO adsorption is generally too weak on surface with close atomic packing, but the enhanced binding at corner atoms (which are missing bonding partners) of cubo-octahedral nanoparticles increases the energy to a near optimal value and produces very active catalysts. • Reaction on the metal alone cannot account for the experimental results. The reaction is dual functional with water activation occurring at the metal-support interface. It is clear from our work that the theory component is essential, not only for prediction of new systems, but also for reconciling data and testing hypotheses regarding potential descriptors. Particularly important is the finding that the interface between nano-sized metal particles and the oxides that are used to support them represent a new state of matter in the sense that the interfacial bonding perturbs the chemical state of both metals atoms and the support atoms in the interfacial region. Some of the first theoretical descriptions of this important chemistry and potential new source of control of catalyst properties are be in preparation for submission. On the homogeneous catalysis side, we have used single site olefin polymerization as the testbed. This system is important because changes in a single ligand bonded to the catalytically active metal site can alter the rates of individual steps in the polymerization sequence and thereby change the properties of the resulting polymer, potentially improving its value in a hundred million pound per year industry. We have made a major advance in understanding such systems by developing a population balance kinetic model that allows us to predict the molecular weight distribution (MWD) of the product. That, in turn, allows use of MWD data to fit kinetic parameters. By combining monomer loss data, MWD, measurement of the number of working active sites, and polymer end group analysis, we have a rich data set that is highly discriminating of kinetic mechanism. Thus, we have a robust tool for producing high quality, detailed kinetic parameters, which we have used to refine mechanisms presented in the literature and discover relationships between steric and electronic properties of group IV catalysts and individual rate constants in a number of systems. Our recent work on six-coordinate Zr, Ti, and Hf amine bis(phenolate) systems, we have shown that: • The sterics (bulkiness) of the ligands specifically affect the chain termination reaction • The electron density on the metal controls misinsertion (flipped orientation) of the olefin into the growing polymer • Steric effects related to the size of the ortho ligand on the catalyst have been shown to strongly affect its the degree of dormancy, i.e. tendency to stop reacting • Changes in the size of the amine pendent group on the catalyst can have such a strong effect on chain termination as to change the catalyst from one that produces only oligomers to one that incorporates oligomers in polymer chains to introduce chain branching. These effects control the length of molecular chains, the number of errors in the regularity of the chains, and the variation of chain lengths in the final product distribution. These characteristics, in turn, determine the properties of the resulting polymer material. Predictive modeling of polymerization process cannot be done without the quantitative rate constant determination that our unique and comprehensive approach has produced. This tool, combined with insights on how catalyst chemistry affects the rate constants, is an important step toward establishing the quantitative relationships between catalyst chemistry and polymer properties that will allow more efficient searches for new catalysts and speed the discovery process. Thus, in both the heterogeneous and homogeneous catalysis areas, this work has brought important new understanding to the field. The technical effectiveness of our approach is demonstrated by its success. For heterogeneous catalysis, experimental work alone showed the important of the metal-support interface, but the integration with theory has allowed deeper understanding of the fundamental source of the effects and shown the path for how to use this understanding for discovery. In the case of homogeneous catalysis, methodology for determination of which reactions are needed to account for the data and the extraction of quantitative values for rate constants for those reactions allows accurate modeling of reaction behavior. This allowed correlation of trends in catalyst properties with alterations of specific rates, thus contributing to a data base that will guide catalyst discovery. While not yet realized, the economic benefits of this approach will come in significantly shortened cycle times for discovery and ability to fill product demand at lower price.« less

Ecoulement et mise en structure de suspensions macroscopiques

NASA Astrophysics Data System (ADS)

Petit, L.

In this review, we report the various experimental studies performed on suspensions of solid particules in liquids, and concerning the rheological behaviour of such systems and the ordering of particules under the applied velocity fields. The number of materials which are flowing suspensions (reagents in chemical engineering, paints while spreading, blood flow, muds in oil reservoir) gave rise to a number of experimental studies, especially in the last twenty years. The results show a wide variety of behaviour, even for systems of intermediate concentration. In addition, even for identical systems, the results depend of the type of flow. Then, it is clear that, in addition of the standard parameters which are to be taken into account, it is necessary to consider the type of flow the suspension is submitted to. The flow influences the spatial distribution of the particules, leading to their ordering or migration. These ordering or motions influence the flow, and then, the rheological behaviour of the whole system. So, there is a feedback mechanism from the ordering to the flow, which explains the experimental observations. Nous reportons dans cette revue les différentes études expérimentales réalisées sur les suspensions de particules solides dans un liquide et qui concernent le comportement rhéologique de ces systèmes ainsi que les mouvements des particules sous l'effet des champs de vitesse imposés. Ces mouvements peuvent conduire soit à des mises en structure, ou encore à des migrations des particules. L'importance du nombre de matériaux qui se présentent sous forme de suspension et qui sont mis en écoulement (réactif en génie chimique, peintures lors de leur mise en place, écoulement sanguin, boues dans les forages pétroliers,...) a motivé un grand nombre de travaux expérimentaux plus fondamentaux sur le sujet, particulièrement dans les vingt dernières années. Les résultats correspondants montrent une très grande diversité des comportements même pour les systèmes moyennement concentrés. Bien plus, pour des systèmes identiques, les résultats dépendent du type d'écoulement imposé. Ceci montre clairement, qu'à côté des facteurs standards qui sont à prendre en compte pour caractériser le comportement de tels systèmes (concentration de la phase solide, taille des particules, interactions entre particules, effets de diffusion,...), il est nécessaire de tenir compte de la nature de l'écoulement auquel est soumise la suspension. Cet écoulement modifie la distribution spatiale des particules, soit directement, soit par l'intermédiaire de différents mécanismes tels que écoulements secondaires, diffusion. Ces effets se traduisent par une mise en ordre des particules, ou bien à des mouvements de migration. Les structures ou les mouvements ainsi créés agissent à leur tour sur les propriétés de l'écoulement, et de là, sur le comportement rhéologique de l'ensemble du système. Il existe ainsi un mécanisme de rétroaction de la structure sur l'écoulement qui permet d'expliquer les comportements observés expérimentalement.

Etude de l’hémogramme dans la drépanocytose homozygote: à propos de 87 patients

PubMed Central

Dahmani, Fatima; Benkirane, Souad; Kouzih, Jaafar; Woumki, Aziz; Mamad, Hassan; Masrar, Azlarab

2016-01-01

La drépanocytose homozygote, fait partie des hémoglobinopathies les plus fréquentes au Maroc. La drépanocytose est caractérisée par une grande variabilité d’expressions clinique et biologique qui dépendent des facteurs génétiques modulateurs et environnementaux. Elle se manifeste par une anémie régénérative de gravité très variable selon les individus. L’évolution spontanée en l’absence de traitement est le décès précoce. La drépanocytose est caractérisée par une grande variabilité d’expression clinique et biologique qui dépend des facteurs génétiques et environnementaux. Un tableau clinique sévère marqué par une fréquence de transfusion élevée et précoce, des complications infectieuses graves et une mortalité précoce. Un état inflammatoire constant caractérisé par des protéines inflammatoires élevées et état nutritionnel compromis. L’objectif est de déterminer le profil des paramètres hématologiques du drépanocytaire homozygote (SS) marocain au cours des stades stationnaires. Nous avons fait une étude descriptive transversale de 87 patients drépanocytaires (SS). Nous avons réalisé une étude biologique comportant: l’hémogramme avec étude morphologique des globules rouges en coloration MGG et numération automatique des réticulocytes. Les électrophorèses de l’hémoglobine à pH alcalin (8.8) sur gel d’agarose avec intégration densitométrique. L’âge moyen est de 13.22 ans ± 16.36 avec un sex- ratio (H/F) de 1.175 et des extrêmes allant de 0.6 à 36 ans. La répercussion de l’anémie sur le plan biologique, est intense chez 88.5% des patients, 67.8% ont une anémie normocytaire contre 29.9% présentant une microcytose, et 2.3% qui présentaient une macrocytose. Le degré d’anisocytose est lié au degré d’anémie, très évocatrice chez les drépanocytaires homozygotes S/S (95,4%). Une réticulocytose était observée chez nos patients (81,6%) et 52.9% présentaient une thrombocytose. Une leucocytose était observée chez 64.4% des patients et 80.5% ont présenté une neutropénie. Les paramètres de l’hémogramme serviront de base de comparaison lors des crises et permettront d’évaluer l’efficacité de la prise en charge par le clinicien. Les valeurs élevées des globules blancs, plaquettes et CCHM semblent déterminants dans l’expression sévère de la drépanocytose au Maroc. Le profil hématologique du drépanocytaire marocain montre des données semblables à celles rapportées en littérature chez ceux de l’Afrique centrale, avec une leucocytose. Les résultats de notre étude suggèrent que, la drépanocytose est un problème de santé le plus fréquent chez les marocains et que nos résultats sont comparables à ceux décrits dans le syndrome drépanocytaire majeur. PMID:28293356

Vortex lines in layered superconductors. II. Pinning and critical currents in high temperature superconductors

NASA Astrophysics Data System (ADS)

Manuel, P.

1994-02-01

In this article, a qualitative survey is given on the various phenomena which influence the critical current of high temperature superconductors. Critical current is defined as a property related to a non-zero electric field criterion, the level of which is fixed by experimental considerations, or efficiency requirements of applications. The presentation is restricted to extrinsic intragranular critical current, which depends in a complex way on the interplay between the characteristics of pinning centres and the properties of the vortex lattice. The discussion is focussed on the configuration {B} / / {c}, which contains the main elements of this problem. Differences of behaviour between Y(123) and BSCCO (Bi(2212) or Bi(2223)) are analysed in the context of their respective anisotropy factors. Possible regimes for pinning and creep are discussed in various temperature domains. From critical current results, a strong pinning regime is found to occur in BSCCO, whereas the pinning strength in Y(123) is still an open question. The thermal decrease of critical current allows a collective creep regime to appear in both materials, but at different temperature ranges. The disappearance of correlation effects near the irreversibility line results in a fall of the effective pinning energy. We show that in BSCCO, the effective pinning energy deduced from experimental results is not in agreement with pinning by randomly dispersed oxygen vacancies. Finally, we shortly describe the microstructures which could allow a more efficient pinning in future materials. On effectue une présentation qualitative des divers phénomènes qui contrôlent la valeur du courant critique dans les supraconducteurs à haute température. La notion de courant critique qui est utilisée est reliée à un critère de champ électrique non nul, fixé par des considérations expérimentales ou des exigences de rendement pour les applications. On se restreint au problème des courants critiques intragranulaires d'origine extrinsèque, qui dépendent de façon complexe des caractéristiques d'ancrage des défauts présents dans le matériau et des propriétés du réseau de vortex. On privilégie la configuration de champ {B} / / {c} qui est la plus révélatrice à cet égard. On analyse les différences de comportement entre les composés Y(123) et BSCCO (Bi(2212) ou Bi(2223)) en liaison avec leurs degrés d'anisotropie respectifs. Les différents régimes d'ancrage et de ll creep gg possibles pour ces composés sont examinés en fonction de la température. Les courants critiques obtenus pour BSCCO semblent correspondre à un régime d'ancrage fort, alors que la question reste ouverte pour Y(l23). La décroissance en température du courant critique expérimental suscite l'apparition d'un régime de ll creep gg collectif pour ces deux composés, avec cependant des différences notables sur la position et l'étendue des domaines correspondants. Au voisinage de la ligne d'irréversibilité, la disparition progressive des corrélations entre vortex provoque une chute de l'énergie d'ancrage effective. Dans BSCCO, celle-ci ne semble pas compatible avec l'hypothèse d'un ancrage par des lacunes d'oxygène réparties de façon aléatoire. On donne en conclusion quelques indications concernant les microstructures susceptibles d'améliorer les propriétés d'ancrage des futurs matériaux.

Monitoring of Volcanogenic CO2-Induced Tree Kills with AVIRIS Image Data at Mammoth Mountain, California

NASA Technical Reports Server (NTRS)

Hausback, Brian P.; Strong, Mel; Farrar, Chris; Pieri, David

1998-01-01

Elevated cold CO2 emissions from the flank of Mammoth Mountain volcano on the southwest rim of the Long Valley Caldera, eastern California, have been the cause of over 100 acres of dead trees in that area since 1990. The source of the CO2 gas is thought to be from one or more magmatic intrusion(s) beneath Mammoth Mountain and is probably related to a period of seismic unrest that began in 1989. The gas rises to the surface probably from depths of a few kilometers, along faults and fracture zones. The gas is at ambient temperature and diffuses from the soil rather than discharging from distinct vents. Typically, soil gas concentrations in tree-kill areas range from 10% to over 90% CO2 by volume, as compared to normal background of < 1% in healthy forest. The gas composition is predominantly CO2 mixed with air (sulfur gases are not elevated), and C and He isotopic ratios are consistent with a magmatic origin for the gas. The total CO2 emission has been estimated at 1200 tons/day, comparable to the emissions at Kilauea. Some of the dead trees are as old as 250 years, suggesting that similar anomalous gas discharge has not occurred over the previous few hundred years. The delta C-13/12 ratio in the Mammoth Mountain CO2 emission averages about -4.5 (PDB standard). This is consistent with a mantle source for the carbon. However, the large volume of the emission suggests that not all of the CO2 is necessarily being generated from the 1989 intrusion. The voluminous gas could be leaking from a vapor-rich zone, capped by an impermeable layer, that was supplied CO2 from degassing of many small magma bodies that intruded beneath the mountain over a period of decades or centuries. Earthquakes in 1989 could have fractured the capping layer and provided pathways for the escape Of CO2 to the surface. Alternatively, some of the CO2 could be derived from contact metamorphism of carbonate rocks intruded by magma. Carbonate-bearing Paleozoic roof pendents crop out in close proximity to Mammoth Mountain. It is possible that similar rocks could occur at depth beneath Mammoth Mountain, and could have contributed CO2 from thermal decomposition caused from recent intrusions. We hope to determine the C-13/12 ratio of a suite of samples to demonstrate if the carbonate rocks could be the source of at least part of the 1990-97 CO2 emission. To better understand the behavior of the CO2 gas, we have used hyperspectral imagery data of Mammoth Mountain acquired from the Airborne Visual/Infrared Imaging Spectrometer (AVIRIS) to map out areas of dead trees. The areas of tree kill have increased in size from about 50 acres in 1994 to about 100 acres in 1997. Tree kill is the major surface manifestation of the carbon dioxide flux at Mammoth Mountain, is widely dispersed, and has been cursorily mapped by regular field mapping techniques in the area. Initial investigations using airborne digital imagery from the Thematic Mapper Simulator (NS001) and AVIRIS instruments have shown extremely encouraging results for complete delineation of the vegetation anomalies. The most successful maps (when compared with ground truth) were developed using AVIRIS data with spectral angle mapper and matched filter algorithms with a data set that was reduced to maximum variance via the minimum noise fraction transformation. The result of this work is a series of maps that show the tree kill areas occurring in an halo-pattern surrounding the base of Mammoth Mountain. We are applying these same techniques to earlier AVIRIS images of Mammoth Mountain to examine the progression of the tree kill areas over time. Temporal maps of the tree kill areas may assist in constructing a picture of the structure beneath Mammoth Mountain.

Etude du comportement et de la modélisation viscoplastique du zircaloy 4recristallisé sous chargements monotones et cycliques uni et multiaxes

NASA Astrophysics Data System (ADS)

Delobelle, P.; Robinet, P.

1994-08-01

The results of experiment performed on a recrystallized zircaloy 4 alloy in the intermediate temperature domain 20 leqslant T leqslant 400 ^{circ}C are presented. To characterize the anisotropy, especially at 350 ^{circ}C, the tests were made under both monotonic and cyclic uni- and bidirectional loadings, i.e. tension-compression, tension-torsion and tension-internal pressure tests. The different anisotropy coefficients and especially R^p = \\varepsilon^p_{θθ} /\\varepsilon^ p _ {{^-_-}{^-_-} } seem to be temperature independent. An important feature of the behavior of this alloy in the neighbourhood of 300 ^{circ}C is attributed to the dislocations-point defects interactions (dynamic strain aging), phenomena often observed in the solid solutions. For the 2D cyclic non proportional loadings it is shown that a weak supplementary hardening appears, which is a function of the degree of the phase lag. We propose to particularize and to apply a unified viscoplastic model with internal variables to the considered alloy, as the model as already been developed and identified elsewhere for other isotropic materials. From a general point of view the introduction of the anisotropy in the model is made by four tensors of rank 4 ; [ M] is assigned to the flow directions, [ N] to the linear parts of the kinematical hardening variables and [ Q] , [ R] respectively to the dynamic and static recoveries of these tensorial variables. This phenomenological formulation leads to a correct representation of the set of the experimental results presented at 350 ^{circ}C, which provides an a posteriori confirmation of the formalism used. On étudie, entre 20 et 400 ^{circ}C, à l'aide d'essais sous chargements multiaxiaux monotones et cycliques (traction, torsion et pression interne) les propriétés viscoplastiques anisotropes de tube de zircaloy 4 recristallisé. A la température de 350 ^{circ}C, l'anisotropie a été quantifiée de façon détaillée. Les quelques résultats obtenus à la température ambiante ainsi que l'indépendance du rapport R^p = \\varepsilon^p_{θθ}/\\varepsilon^ p_{{^-_-}{^-_-} } avec la température laissent supposer que l'ensemble des coefficients d'anisotropie ne dépendent pas de la température. Par contre, la fluidité de cet alliage présente un minimum très marqué au voisinage de 300 ^{circ}C. Ce comportement est imputable au vieillissement dynamique fréquemment observé dans les solutions solides d'insertion. Lors d'un chargement cyclique hors phase (traction-torsion déphasée à 90^{circ}) ce matériau présente un léger durcissement supplémentaire. On propose l'extension au cas du zircaloy 4 de la formulation d'un modèle viscoplastique unifié développé et identifié par ailleurs sur d'autres matériaux initialement isotropes. D'une manière générale, l'introduction de l'anisotropie dans ce modèle s'effectue par l'intermédiaire de quatre tenseurs d'ordre 4 affectant les directions d'écoulement [ M] , les parties linéaires des écrouissages cinématiques [ N] , ainsi que les restaurations dynamiques [ Q] et statiques [ R] de ces mêmes variables d'écrouissage. L'identification de ce modèle est discutée et réalisée à 350 ^{circ}C. On montre l'adéquation du formalisme à appréhender l'ensemble des caractéristiques mécaniques de cet alliage.

Intrinsic mechanical properties and strengthening methods in inorganic crystalline materials

NASA Astrophysics Data System (ADS)

Mecking, H.; Hartig, Ch.; Seeger, J.

1991-06-01

The paper deals with strength and fracture in metals, ceramics and intermetallic compounds. The emphasis is on the interrelation between microstructure and macroscopic behavior and how the concepts for alloy design are mirroring this interrelationship. The three materials classes are distinguished by the physical nature of the atomic bonding forces. In metals metallic bonding predominates which causes high ductility but poor strength. Accordingly material development concentrates on production of microstructures which optimize the yield strength without unacceptable loss in ductility. In ceramics covalent bonding prevails which results in high hardness and high elastic stiffness but at the same time extreme brittleness. Contrary to the metal-ease material development aims at a kind of pseudo ductility in order to rise the fracture toughness to sufficiently high levels. In intermetallic phases the atomic bonds are a mixture of metallic and covalent bonding where depending on the alloying system the balance between the two contributions may be quite different. Accordingly the properties of intermetallics are in the range between metals and ceramics. By a variety of microstructural measures their properties can be changed in direction. either towards metallic or ceramic behavior. General rules for alloy design are not available, rather every system demands very specific experience since properties depend to a considerable part on intrinsic properties of lattice defects such as dislocations, antiphase boundaries, stacking faults and grain boundaries. Cet article traite de la résistance et de la fracture des métaux, des céramiques et des composés intermétalliques. L'accent est mis sur les correspondances entre la microstructure et le comportement macroscopique ainsi que sur la façon dont de tels concepts se reflètent dans la création de nouveaux alliages. C'est la nature des forces de liaisons qui distingue chaque type de matériaux. Dans les métaux, les liaisons métalliques dominent, ce qui entraîne une grande ductilité mais une médiocre résistance. En conséquence, dans le développement de nouveaux matériaux on cherche préférentiellement à produire des microstructures qui optimisent la résistance élastique sans perte inacceptable de ductilité. Dans les céramiques, les liaisons covalentes prédominent; ceci entraîne une dureté élevée, une grande rigidité, mais en même temps une extrême fragilité. Au contraire des métaux, le développement de ces matériaux vise à obtenir une pseudoductilité afin d'amener la tenacité à des niveaux suffisamment élevés. Dans les phases intermétalliques les liaisons atomiques correspondent à un mélange de liaisons métalliques et covalentes. La contribution de chacune d'entre elles varie en fonction du système allié. En conséquence, les propriétés des intermétalliques se situent entre celles des métaux et des céramiques. Par divers changements microstructuraux des propriétés peuvent être déplacées pour se rapprocher d'un comportement de type métallique ou de type céramique. Donner des règles générales pour la création de nouveaux alliages n'est pas possible car chaque système demande à être testé, les propriétés dépendent en effet, pour une part considérable, des propriétés intrinsèques des défauts de réseau comme les dislocations, les parois d'antiphase ou les joints de grains.

John Porter Book Prize Lecture: Bringing the Social Back In-On the Integration of Muslim Immigrants and the Jurisprudence of Muslim Minorities.

PubMed

Kazemipur, Abdolmohammad

2016-11-01

In much of the academic debate on the integration of Muslims into Western liberal democracies, Islam is often treated as one or the sole independent variable in the lives of Muslims. Offering to view Islam-or the understanding of Islam among Muslims-as the dependent variable, The Muslim Question in Canada discusses the influence of socioeconomic forces in shaping the Muslim immigrants' opinions, modes of thinking, and even interpretations of their faith. Drawing on this general approach, which is introduced and developed in the book using a variety of both quantitative and qualitative data, this article focuses on a school of thought within the Islamic jurisprudence known as fiqh al-aqalliyyat al-Muslema (the jurisprudence of Muslim minorities). The premise of the jurisprudence of Muslim minorities is that the lived realities of Muslims who reside in non-Muslim countries are so fundamentally different from those of the Muslim-majority nations that traditional Islamic jurisprudence cannot offer meaningful solutions for their problems. Therefore, there is a need to establish an entirely different jurisprudential approach centered around the lives of the Muslim minorities. The purpose of the bulk of jurisprudential theorization efforts in this line of reasoning is to facilitate the lives of the Muslim minorities; as well, they aim to create a foundation for the moral obligations of Muslims toward non-Muslims in such environments. I argue that a crucial element that triggers such a development is the existence of a positive relationship between Muslims and non-Muslims in immigrant-receiving countries. Souvent au sein des débats sur l'intégration des Musulmans dans des démocraties libérales de l'Ouest, l'Islam est traité comme un ou le seul enjeu dans la vie des fidèles. The Muslim Question in Canada examine l'Islam ou la compréhension de l'Islam chez les Musulmans comme un enjeu dépendent et aborde l'influence des forces socio-économiques sur les opinons des immigrants musulmans ainsi que sur leurs modes de pensée et même sur la manière dont ils interprètent leur foi. Inspiré par cette approche, que l'on présente et développe dans le livre, et qui se sert de données à la fois quantitatives et qualitatives, cet article se concentre sur une école de pensée à l'intérieur de la jurisprudence islamique, connue sous le nom de fiqh al aqalliyyat al-Muslema (la jurisprudence des minorités musulmanes). La prémisse de la jurisprudence des minorités musulmanes est que les réalités vécues par les Musulmans qui vivent dans des pays non-musulmans sont au fond tellement différentes de celles de la majorité musulmane que la jurisprudence traditionnelle ne présente pas de solutions pertinentes pour résoudre leurs problèmes. Ainsi, il faut établir une approche jurisprudentielle totalement différente, axée sur la vie des minorités musulmanes. L'objectif de la plupart des efforts au niveau de la théorisation de la jurisprudence qui adoptent cette vision est de rendre la vie des minorités musulmanes plus facile. Ces efforts tentent aussi de faire en sorte que les Musulmans ressentent une certaine obligation morale envers les non-Musulmans dans ces environnements. J'avance ici que l'aspect qui déclenche un tel développement est le rapport positif entre les Musulmans et les non-Musulmans dans les pays qui reçoivent des immigrants. © 2016 Canadian Sociological Association/La Société canadienne de sociologie.

Global cardiovascular mortality risk in the adult Polish population: prospective assessment of the cohorts studied in multicentre national WOBASZ and WOBASZ Senior studies.

PubMed

Piotrowski, Walerian; Waśkiewicz, Anna; Cicha-Mikołajczyk, Alicja

2016-01-01

To develop a global cardiovascular disease (CVD) mortality risk model for the Polish population and to verify these data in the context of the SCORE risk algorithm. We analysed data obtained in two multicentre national population studies, the WOBASZ study which was conducted in 2003-2005 and included 14,769 subjects aged 20-74 years, and the WOBASZ Senior study which was conducted in 2007 and included 1096 subjects above 74 years of age. All these subjects were followed for survival status until 2012 and the cause of death was determined. The mean duration of follow-up was 8.2 years for WOBASZ study participants and about 5 years for WOBASZ Senior study participants. Overall, 1436 subjects died, including 568 due to CVD. For the purpose of our analysis of overall and CVD mortality, 15 established risk factors were selected. Survival was analysed separately in WOBASZ and WOBASZ Senior study participants. Statistical methods included descriptive statistics, Kaplan-Meier curves, Cox proportional hazard models, and the SCORE risk algorithm. Measure of incompatibility of the SCORE risk model to the Polish population was determined as the difference between mortality rates by the SCORE risk quartiles and the Cox approach. During the 8-year follow-up of the WOBASZ study population, mortality due to CVD was 38% among men and 31% among women. The most common causes of CVD mortality were ischaemic heart disease (IHD, 33%) followed by cerebro-vascular disease (17%) in men, and cerebrovascular disease (31%) followed by IHD (23%) in women. We found significant differences between men and women in regard to survival curves for both overall mortality and CVD mortality (p < 0.0001). For overall mortality among men and women, nearly all selected risk factors were shown to be significant in univariate analyses, except for high density lipoprotein cholesterol (HDL-C) level and the total cholesterol/HDL-C ratio in men, and smoking status in women. In multivariate analysis, independent predictors in men included age, glucose level, systolic blood pressure, and smoking status. In women, independent predictors were age, smoking status, and diabetes. During the 5-year follow-up of the WOBASZ Senior study population, mortality due to CVD was 48% among men and 58% among women. The most common cause of CVD mortality in both men and women was IHD (29% and 24%, respectively), followed by cerebrovascular disease (16% and 21%, respectively). We found significant differences between men and women in regard to survival curves for overall mortality (p < 0.0001) but not for CVD mortality (p = 0.0755). Due to the fact that survival curves for CVD mortality did not differ between men and women, we estimated the cut-off age for no survival difference in the WOBASZ study. By selecting the oldest patients and adding them to the WOBASZ Senior cohort, we obtained the cut-off age of 70 years above which the survival curves were not significantly different between men and women. In univariate analyses, independent predictors in men were age and creatinine level. These factors remained significant in multivariate analysis. In women above 74 years of age, independent predictors in univariate analyses included age, HDL-C level, creatinine level, total cholesterol/HDL-C ratio, and smoking status. Age, HDL-C level, creatinine level, and smoking status remained independent predictors of overall mortality in multivariate analysis. For CVD mortality, significant predictors were the same as for overall mortality. In women, significant predictors in uni- and multivariate analyses were age and smoking status. Overall disagreement between CVD mortality rates by the SCORE risk model and the Cox model was 5.7% in men and 2% in women. 1. Long-term follow-up of WOBASZ and WOBASZ Senior study participants allowed assessment of the inde-pendent association of the evaluated cardiovascular risk factors with CVD mortality in the Polish population. 2. Validation of the SCORE risk algorithm to estimate individual global CVD risk in the Polish population showed a high predictive value of this algorithm.

Etude des interdiffusions en phase solide dans le contact Er/GaAs

NASA Astrophysics Data System (ADS)

Députier, S.; Guivarc'h, A.; Caulet, J.; Minier, M.; Guérin, R.

1994-05-01

Solid state interdiffusions between a thin film of erbium deposited under vacuum conditions and (001) and (111) GaAs substrates were investigated in the temperature range 350-800 ^{circ}C. Complementary analysis methods (RBS, X-ray diffraction) allow us to point out, according to annealing temperatures, successives steps of the interaction corresponding to different mixtures of phases, essentially binaries. These steps are strongly depending on the GaAs substrate orientation, especially the final step of the interdiffusions. On (001) GaAs, only two steps have been observed : no visible interaction is noticed between erbium and GaAs before 600 ^{circ}C ; the interaction begins at 600 ^{circ}C, evolves slightly and leads at 800 ^{circ}C to the nominal composition " Er{10}GaAs " which corresponds to a mixture of several phases Er5Ga3, Er and ErAs. On (111) GaAs, several steps of interaction have been found ; first of all, erbium reacts with the substrate at 400 ^{circ}C (Er5Ga3 + Er mixture), then the reaction is continuing at 600 ^{circ}C (Er5Ga3 + Er + ErAs mixture) before reaching at 800 ^{circ}C the nominal composition " Er{1,5}GaAs ", which is in fact a mixture of the three binaries ErAs + ErGa2 + Er3Ga5. It can be noticed that the 800 ^{circ}C annealing is not sufficient to reach the mixture of the phases ErAs + Ga which, according to the ternary phase diagram, should be the final stage of the interaction Er/GaAs. The analysis of the Er/GaAs interdiffusions shows that ErAs is the " key " compound around which the interaction progresses. This compound appears as an ideal candidate to realize epitaxial ErAs/GaAs heterostructures. Les interdiffusions en phase solide entre une couche mince d'erbium déposée dans des conditions d'ultra-vide et des substrats de GaAs orientés (001) et (111) ont été étudiées après des traitements thermiques d'une heure entre 350 et 800 ^{circ}C. L'utilisation de techniques complémentaires d'analyse (RBS, diffraction X) a permis de mettre en évidence, en fonction de la température de recuit, plusieurs étapes successives d'interaction correspondant à des mélanges de phases, essentiellement des binaires. Elles dépendent fortement de l'orientation du substrat de GaAs, en particulier l'étape finale des interactions. Sur GaAs (001), seules deux étapes ont été observées : avant 600 ^{circ}C, il n'y a pas d'interaction visible de l'erbium avec le substrat ; celle-ci ne s'amorce qu'à 600 ^{circ}C pour n'évoluer ensuite que faiblement et conduire, à 800 ^{circ}C, à une composition nominale " Er{10}GaAs ", mélange des phases Er5Ga3 + Er + ErAs. Sur GaAs (111), plusieurs étapes d'interaction sont observées : l'erbium réagit avec le substrat dès 400 ^{circ}C (mélange des phases Er5Ga3 + Er), puis l'interaction se poursuit à 600 ^{circ}C (mélange Er5Ga3 + Er + ErAs) avant d'atteindre à 800 ^{circ}C la composition nominale " Er{1,5}GaAs ", constituée d'un mélange de grains des trois binaires ErAs + ErGa2 + Er3Ga5. Il faut noter que le recuit à 800 ^{circ}C n'est pas suffisant pour atteindre le mélange de phases Ga + ErAs qui, selon le diagramme ternaire, devrait être le stade ultime de l'interaction Er/GaAs. L'analyse des interdiffusions Er/GaAs montre que ErAs est le composé " clé " autour duquel pivote l'interaction Er/GaAs. Ce composé apparaît comme un candidat idéal pour la réalisation d'hétérostructures épitaxiées ErAs/GaAs.

Water-soluble polymers and compositions thereof

DOEpatents

Smith, B.F.; Robison, T.W.; Gohdes, J.W.

1999-04-06

Water-soluble polymers including functionalization from the group of amino groups, carboxylic acid groups, phosphonic acid groups, phosphonic ester groups, acylpyrazolone groups, hydroxamic acid groups, aza crown ether groups, oxy crown ethers groups, guanidinium groups, amide groups, ester groups, aminodicarboxylic groups, permethylated polyvinylpyridine groups, permethylated amine groups, mercaptosuccinic acid groups, alkyl thiol groups, and N-alkylthiourea groups are disclosed.

Water-soluble polymers and compositions thereof

DOEpatents

Smith, Barbara F.; Robison, Thomas W.; Gohdes, Joel W.

2002-01-01

Water-soluble polymers including functionalization from the group of amino groups, carboxylic acid groups, phosphonic acid groups, phosphonic ester groups, acylpyrazolone groups, hydroxamic acid groups, aza crown ether groups, oxy crown ethers groups, guanidinium groups, amide groups, ester groups, aminodicarboxylic groups, permethylated polvinylpyridine groups, permethylated amine groups, mercaptosuccinic acid groups, alkyl thiol groups, and N-alkylthiourea groups are disclosed.

Water-soluble polymers and compositions thereof

DOEpatents

Smith, Barbara F.; Robison, Thomas W.; Gohdes, Joel W.

1999-01-01

Water-soluble polymers including functionalization from the group of amino groups, carboxylic acid groups, phosphonic acid groups, phosphonic ester groups, acylpyrazolone groups, hydroxamic acid groups, aza crown ether groups, oxy crown ethers groups, guanidinium groups, amide groups, ester groups, aminodicarboxylic groups, permethylated polyvinylpyridine groups, permethylated amine groups, mercaptosuccinic acid groups, alkyl thiol groups, and N-alkylthiourea groups are disclosed.

Aquifer/aquitard interfaces: mixing zones that enhance biogeochemical reactions

NASA Astrophysics Data System (ADS)

McMahon, P. B.

2001-01-01

Several important biogeochemical reactions are known to occur near the interface between aquifer and aquitard sediments. These reactions include O2 reduction; denitrification; and Fe3+, SO42-, and CO2 (methanogenesis) reduction. In some settings, these reactions occur on the aquitard side of the interface as electron acceptors move from the aquifer into the electron-donor-enriched aquitard. In other settings, these reactions occur on the aquifer side of the interface as electron donors move from the aquitard into the electron-acceptor-enriched, or microorganism-enriched, aquifer. Thus, the aquifer/aquitard interface represents a mixing zone capable of supporting greater microbial activity than either hydrogeologic unit alone. The extent to which biogeochemical reactions proceed in the mixing zone and the width of the mixing zone depend on several factors, including the abundance and solubility of electron acceptors and donors on either side of the interface and the rate at which electron acceptors and donors react and move across the interface. Biogeochemical reactions near the aquifer/aquitard interface can have a substantial influence on the chemistry of water in aquifers and on the chemistry of sediments near the interface. Résumé. Il se produit au voisinage de l'interface entre les aquifères et les imperméables plusieurs réactions biogéochimiques importantes. Il s'agit des réactions de réduction de l'oxygène, de la dénitrification et de la réduction de Fe3+, SO42- et CO2 (méthanogenèse). Dans certaines situations, ces réactions se produisent du côté imperméable de l'interface, avec des accepteurs d'électrons qui vont de l'aquifère vers l'imperméable riche en donneurs d'électrons. Dans d'autres situations, ces réactions se produisent du côté aquifère de l'interface, avec des donneurs d'électrons qui se déplacent de l'imperméable vers l'aquifère riche en accepteurs d'électrons ou en microorganismes. Ainsi, l'interface aquifère/imperméable constitue une zone de mélange capable de supporter une plus grande activité microbienne que chacune des deux unités hydrogéologiques seules. L'extension des réactions biogéochimiques dans la zone de mélange et la largeur de cette zone dépendent de plusieurs facteurs, dont l'abondance et la solubilité des accepteurs et des donneurs d'électrons de chaque côté de l'interface, et le taux de réaction et de déplacement des accepteurs et des donneurs d'électrons au travers de cette interface. Les réactions biogéochimiques au voisinage de l'interface aquifère/imperméable peuvent avoir une influence appréciable sur le chimisme de l'eau des aquifères et sur celui des sédiments au niveau de l'interface. Resúmen. Es conocido que varias reacciones biogeoquímicas de importancia pueden tener lugar cerca de la interfaz entre los sedimentos de un acuífero y de un acuitardo. Entre ellas, destaca la reducción del O2, la denitrificación, y la reducción del Fe+3, SO4-2 y CO2 (metanogénesis). En algunos casos, estas reacciones se producen en la región cercana al acuitardo, ya que los dadores de electrones se mueven desde éste hacia el acuífero, el cual está enriquecido en aceptores de electrones o en microorganismos. Así, la interfaz acuífero/acuitardo constituye una zona de mezcla que es capaz de sustentar una actividad microbiana mayor que cualquier unidad hidrogeológica por sí misma. El alcance de las reacciones biogeoquímicas en la zona de mezcla y el ancho de esta zona de mezcla depende de varios factores, como la abundancia y la solubilidad de los aceptores y dadores de electrones en ambas caras de la interfaz y la velocidad a la que los aceptores y dadores de electrones reaccionan y se mueven a través de la interfaz. Las reacciones biogeoquímicas cerca de la interfaz acuífero/acuitardo pueden tener una influencia substancial en la hidroquímica de los acuíferos y en la química de los sedimentos cerca de la superficie.

The significance of microbial processes in hydrogeology and geochemistry

NASA Astrophysics Data System (ADS)

Chapelle, Francis H.

Microbial processes affect the chemical composition of groundwater and the hydraulic properties of aquifers in both contaminated and pristine groundwater systems. The patterns of water-chemistry changes that occur depend upon the relative abundance of electron donors and electron acceptors. In many pristine aquifers, where microbial metabolism is limited by the availability of electron donors (usually organic matter), dissolved inorganic carbon (DIC) accumulates slowly along aquifer flow paths and available electron acceptors are consumed sequentially in the order dissolved oxygen >nitrate>Fe(III)>sulfate>CO2 (methanogenesis). In aquifers contaminated by anthropogenic contaminants, an excess of available organic carbon often exists, and microbial metabolism is limited by the availability of electron acceptors. In addition to changes in groundwater chemistry, the solid matrix of the aquifer is affected by microbial processes. The production of carbon dioxide and organic acids can lead to increased mineral solubility, which can lead to the development of secondary porosity and permeability. Conversely, microbial production of carbonate, ferrous iron, and sulfide can result in the precipitation of secondary calcite or pyrite cements that reduce primary porosity and permeability in groundwater systems. Les processus microbiologiques peuvent affecter la composition chimique de l'eau souterraine et les propriétés hydrauliques des nappes aussi bien dans les systèmes aquifères pollués que dans les systèmes indemnes de pollution. Les changements de chimisme des eaux qui se produisent dépendent de l'abondance relative des donneurs et des accepteurs d'électrons. Dans les aquifères non contaminés, où le métabolisme microbien est limité par la disponibilité des donneurs d'électrons (en général la matière organique), le carbone minéral dissous (CMD) s'accumule lentement le long des axes d'écoulement souterrain et les accepteurs d'électrons disponibles sont consommés de façon séquentielle, dans l'ordre oxygène dissous>nitrate>fer (III)>sulfate>CO2 (méthanogenèse). Dans les aquifères pollués par des contaminants d'origine humaine, il existe un excès de carbone organique disponible et le métabolisme microbien est limité par la disponibilité des accepteurs d'électrons. En plus des modifications du chimisme des eaux souterraines, la matrice encaissante de l'aquifère est affectée par des processus microbiens. La production de dioxyde de carbone et d'acides organiques peut conduire à accroître la solubilité de minéraux, ce qui peut produire un développement de la porosité secondaire et de la perméabilité. Inversement, la production microbienne de carbonate, de fer ferreux et de sulfure peut provoquer la précipitation de ciments de calcite secondaire ou de pyrite qui réduisent la porosité primaire et la perméabilité dans les nappes. Los procesos microbianos afectan la composición química y las propiedades hidráulicas de los acuíferos, independientemente de su grado de contaminación. Los cambios en la química de las aguas dependen de la abundancia relativa entre donantes y receptores de electrones. En muchos acuíferos no contaminados, donde el metabolismo de los microbios está limitado por la disponibilidad de donantes de electrones (normalmente materia orgánica), el carbono inorgánico disuelto (CID) se acumula lentamente a lo largo de las líneas de flujo y los receptores de electrones se consumen sucesivamente en el siguiente orden: oxígeno disuelto>nitrato>Fe (III)>sulfato>CO2 (metanogénesis). En los acuíferos que presentan contaminación antrópica, existe un exceso de carbono orgánico disponible y entonces el metabolismo de los microbios se encuentra limitado por la disponibilidad de receptores de electrones. Además de los cambios en la química de las aguas, los procesos microbianos afectan también a la matriz sólida del acuífero la producción de CO2 y de ácidos orgánicos puede dar lugar a una mayor solubilidad del mineral, lo que supone un aumento en porosidad secundaria y permeabilidad. Por el contrario, los procesos microbianos pueden dar lugar a la producción de carbonato, ión ferroso y sulfuro, precipitando calcita o pirita y reduciendo la porosidad primaria y la permeabilidad.

Effect of clinician-patient communication on compliance with flupentixol-melitracen in functional dyspepsia patients

PubMed Central

Yan, Xiu-Juan; Li, Wen-Ting; Chen, Xin; Wang, Er-Man; Liu, Qing; Qiu, Hong-Yi; Cao, Zhi-Jun; Chen, Sheng-Liang

2015-01-01

AIM: To explore whether clinician-patient communication affects adherence to psychoactive drugs in functional dyspepsia (FD) patients with psychological symptoms. METHODS: A total of 262 FD patients with psychological symptoms were randomly assigned to four groups. The patients in Groups 1-3 were given flupentixol-melitracen (FM) plus omeprazole treatment. Those in Group 1 received explanations of both the psychological and gastrointestinal (GI) mechanisms of the generation of FD symptoms and the effects of FM. In Group 2, only the psychological mechanisms were emphasized. The patients in Group 3 were not given an explanation for the prescription of FM. Those in Group 4 were given omeprazole alone. The primary endpoints of this study were compliance rate and compliance index to FM in Groups 1-3. Survival analyses were also conducted. The secondary end points were dyspepsia and psychological symptom improvement in Groups 1-4. The correlations between the compliance indices and the reductions in dyspepsia and psychological symptom scores were also evaluated in Groups 1-3. RESULTS: After 8 wk of treatment, the compliance rates were 67.7% in Group 1, 42.4% in Group 2 and 47.7% in Group 3 (Group 1 vs Group 2, P = 0.006; Group 1 vs Group 3, P = 0.033). The compliance index (Group 1 vs Group 2, P = 0.002; Group 1 vs Group 3, P = 0.024) with the FM regimen was significantly higher in Group 1 than in Groups 2 and 3. The survival analysis revealed that the patients in Group 1 exhibited a significantly higher compliance rate than Groups 2 and 3 (Group 1 vs Group 2, P = 0.002; Group 1 vs Group 3, P = 0.018). The improvement in dyspepsia (Group 1 vs Group 2, P < 0.05; Group 1 vs Group 3, P < 0.05; Group 1 vs Group 4, P < 0.01) and psychological symptom scores (anxiety: Group 1 vs Group 2, P < 0.01; Group 1 vs Group 3, P < 0.05; Group 1 vs Group 4, P < 0.01; depression: Group 1 vs Group 2, P < 0.01; Group 1 vs Group 3, P < 0.01; Group 1 vs Group 4, P < 0.01) in Group 1 were greater than those in Groups 2-4. The compliance indices were positively correlated with the reduction in symptom scores in Groups 1-3. CONCLUSION: Appropriate clinician-patient communication regarding the reasons for prescribing psychoactive drugs that emphasizes both the psychological and GI mechanisms might improve adherence to FM in patients with FD. PMID:25914475

Effect of clinician-patient communication on compliance with flupentixol-melitracen in functional dyspepsia patients.

PubMed

Yan, Xiu-Juan; Li, Wen-Ting; Chen, Xin; Wang, Er-Man; Liu, Qing; Qiu, Hong-Yi; Cao, Zhi-Jun; Chen, Sheng-Liang

2015-04-21

To explore whether clinician-patient communication affects adherence to psychoactive drugs in functional dyspepsia (FD) patients with psychological symptoms. A total of 262 FD patients with psychological symptoms were randomly assigned to four groups. The patients in Groups 1-3 were given flupentixol-melitracen (FM) plus omeprazole treatment. Those in Group 1 received explanations of both the psychological and gastrointestinal (GI) mechanisms of the generation of FD symptoms and the effects of FM. In Group 2, only the psychological mechanisms were emphasized. The patients in Group 3 were not given an explanation for the prescription of FM. Those in Group 4 were given omeprazole alone. The primary endpoints of this study were compliance rate and compliance index to FM in Groups 1-3. Survival analyses were also conducted. The secondary end points were dyspepsia and psychological symptom improvement in Groups 1-4. The correlations between the compliance indices and the reductions in dyspepsia and psychological symptom scores were also evaluated in Groups 1-3. After 8 wk of treatment, the compliance rates were 67.7% in Group 1, 42.4% in Group 2 and 47.7% in Group 3 (Group 1 vs Group 2, P = 0.006; Group 1 vs Group 3, P = 0.033). The compliance index (Group 1 vs Group 2, P = 0.002; Group 1 vs Group 3, P = 0.024) with the FM regimen was significantly higher in Group 1 than in Groups 2 and 3. The survival analysis revealed that the patients in Group 1 exhibited a significantly higher compliance rate than Groups 2 and 3 (Group 1 vs Group 2, P = 0.002; Group 1 vs Group 3, P = 0.018). The improvement in dyspepsia (Group 1 vs Group 2, P < 0.05; Group 1 vs Group 3, P < 0.05; Group 1 vs Group 4, P < 0.01) and psychological symptom scores (anxiety: Group 1 vs Group 2, P < 0.01; Group 1 vs Group 3, P < 0.05; Group 1 vs Group 4, P < 0.01; depression: Group 1 vs Group 2, P < 0.01; Group 1 vs Group 3, P < 0.01; Group 1 vs Group 4, P < 0.01) in Group 1 were greater than those in Groups 2-4. The compliance indices were positively correlated with the reduction in symptom scores in Groups 1-3. Appropriate clinician-patient communication regarding the reasons for prescribing psychoactive drugs that emphasizes both the psychological and GI mechanisms might improve adherence to FM in patients with FD.

Theoretical Issues in Clinical Social Group Work.

ERIC Educational Resources Information Center

Randall, Elizabeth; Wodarski, John S.

1989-01-01

Reviews relevant issues in clinical social group practice including group versus individual treatment, group work advantages, approach rationale, group conditions for change, worker role in group, group composition, group practice technique and method, time as group work dimension, pretherapy training, group therapy precautions, and group work…

Correlation of ABO and Rh blood groups with transfusion administration and fever onset after hip surgery in children.

PubMed

Brdar, Radivoj; Petronic, Ivana; Nikolic, Dejan; Golubovic, Zoran; Bukva, Bojan; Radlovic, Vladimir; Abramovic, Dusan; Ducic, Sinisa; Colovic, Hristina

2012-01-01

Aim of our study was to evaluate distribution of ABO and Rh blood type groups in children after hip surgery regarding transfusion administration and fever presence. Four types of ABO blood groups (A; B; AB; O) and 2 types of Rh blood groups (Rh+; Rh-) were evaluated in group with administered transfusion (tr+) and without given transfusion (tr-); and in group with fever (fev+) and without fever (fev-), in 146 children after hip surgery. Tr+ and fev+ groups were divided into 3 groups (0-24h; 25-48h; 49-72h): for tr+ group (Group 1, Group 2, Group 3), and for fev+ group (Group A, Group B, Group C). AB blood group significantly decreased in Group 1 (χ2= 6.44; p<0.05) and A blood group in Group 3 in tr+ group (χ2= 7.68; p<0.01). O blood group significantly increased in Group 3 in tr+ group (χ2= 9.96; p<0.01). AB blood group significantly decreased in Groups B (χ2= 12.2; p<0.01) and C (χ2= 4.2; p<0.05) in fev+ versus fevgroup. B blood group significantly increased in Group C (χ2= 34.4; p<0.01) in fev+group. Administration of transfusion and fever onset in pediatric patients undergoing surgical correction of the hip is not influenced by the ABO and Rh blood groups system in humans. There is correlation between distribution of ABO blood groups with the time of transfusion administration and fever onset in children after hip surgery.

ImPressOne: A Pressure Display and Acquisition Program for the Low Speed Wind Tunnel at DSTO

DTIC Science & Technology

2005-11-01

Adjustable group; CZ, CS Group 1 – Pressure group A; A0, A1, A2, A3 Group 2 – Pressure group B; B0, B1, B2, B3 Group 3 – Pressure group C; C0, C1 Group...4 – Pressure group D; D0, D1 Group 5 – Temperature group Q; Q0, Q1 Group 6 – Temperature group R; R0, R1 Group 7 – Temperature group S; S0, S1

Group processing in an undergraduate biology course for preservice teachers: Experiences and attitudes

NASA Astrophysics Data System (ADS)

Schellenberger, Lauren Brownback

Group processing is a key principle of cooperative learning in which small groups discuss their strengths and weaknesses and set group goals or norms. However, group processing has not been well-studied at the post-secondary level or from a qualitative or mixed methods perspective. This mixed methods study uses a phenomenological framework to examine the experience of group processing for students in an undergraduate biology course for preservice teachers. The effect of group processing on students' attitudes toward future group work and group processing is also examined. Additionally, this research investigated preservice teachers' plans for incorporating group processing into future lessons. Students primarily experienced group processing as a time to reflect on past performance. Also, students experienced group processing as a time to increase communication among group members and become motivated for future group assignments. Three factors directly influenced students' experiences with group processing: (1) previous experience with group work, (2) instructor interaction, and (3) gender. Survey data indicated that group processing had a slight positive effect on students' attitudes toward future group work and group processing. Participants who were interviewed felt that group processing was an important part of group work and that it had increased their group's effectiveness as well as their ability to work effectively with other people. Participants held positive views on group work prior to engaging in group processing, and group processing did not alter their atittude toward group work. Preservice teachers who were interviewed planned to use group work and a modified group processing protocol in their future classrooms. They also felt that group processing had prepared them for their future professions by modeling effective collaboration and group skills. Based on this research, a new model for group processing has been created which includes extensive instructor interaction and additional group processing sessions. This study offers a new perspective on the phenomenon of group processing and informs science educators and teacher educators on the effective implementation of this important component of small-group learning.

[Effects of combined natural hirudin and hyperbaric oxygen therapy on survival of transplanted random-pattern skin flap in rats].

PubMed

Cai, Jieyun; Lin, Bojie; Pan, Xinyuan; Cui, Jia; Pradhan, Rohan; Yin, Guoqian

2018-04-01

To investigate the effect of natural hirudin combined with hyperbaric oxygen therapy on the survival of transplanted random-pattern skin flap in rats. A random-pattern skin flap in size of 10.0 cm×2.5 cm was elevated on the dorsum of 72 Sprague Dawley rats. Then the 72 rats were randomly divided into 4 groups ( n =18) according to the therapy method. At immediate and within 4 days after operation, the rats were treated with normal saline injection in control group, normal saline injection combined with hyperbaric oxygen treatment in hyperbaric oxygen group, the natural hirudin injection in natural hirudin group, and the natural hirudin injection combined with hyperbaric oxygen treatment in combined group. The flap survival was observed after operation, and survival rate was evaluated at 6 days after operation. The skin samples were collected for histological analysis, microvessel density (MVD) measurement, and evaluation of tumor necrosis factor α (TNF-α) expression level by the immunohistochemical staining at 2 and 4 days after operation. Partial necrosis occurred in each group after operation, and the flap in combined group had the best survival. The survival rate of flap was significantly higher in hyperbaric oxygen group, natural hirudin group, and combined group than that in control group, and in combined group than in hyperbaric oxygen group and natural hirudin group ( P <0.05). There was no significant difference between hyperbaric oxygen group and natural hirudin group ( P >0.05). At 2 days, more microvascular structure was observed in hyperbaric oxygen group, natural hirudin group, and combined group in comparison with control group; while plenty of inflammatory cells infiltration in all groups. At 4 days, the hyperbaric oxygen group, natural hirudin group, and the combined group still showed more angiogenesis. Meanwhile, there was still infiltration of inflammatory cells in control group, inflammatory cells in the other groups were significantly reduced when compared with at 2 days. At 2 days, the MVD was significantly higher in hyperbaric oxygen group, natural hirudin group, and combined group than that in control group ( P <0.05); the expression of TNF-α was significantly lower in hyperbaric oxygen group, natural hirudin group, and combined group than that in control group ( P <0.05). There was no significant difference in above indexes between hyperbaric oxygen group, natural hirudin group, and combined group ( P >0.05). At 4 days, the MVD was significantly higher in hyperbaric oxygen group, natural hirudin group, and combined group than that in control group, in natural hirudin group and combined group than in hyperbaric oxygen group ( P <0.05). The expression of TNF-α was significantly lower in hyperbaric oxygen group, natural hirudin group, and combined group than that in control group, in combined group than in natural hirudin group and hyperbaric oxygen group ( P <0.05). Hyperbaric oxygen and natural hirudin therapy after random-pattern skin flap transplantation can improve the survival of flaps. Moreover, combined therapy is seen to exhibit significant synergistic effect. This effect maybe related to promotion of angiogenesis and the reduction of inflammation response.

Between-group competition elicits within-group cooperation in children

NASA Astrophysics Data System (ADS)

Majolo, Bonaventura; Maréchal, Laëtitia

2017-02-01

Aggressive interactions between groups are frequent in human societies and can bear significant fitness costs and benefits (e.g. death or access to resources). During between-group competitive interactions, more cohesive groups (i.e. groups formed by individuals who cooperate in group defence) should out-perform less cohesive groups, other factors being equal (e.g. group size). The cost/benefit of between-group competition are thought to have driven correlated evolution of traits that favour between-group aggression and within-group cooperation (e.g. parochial altruism). Our aim was to analyse whether the proximate relationship between between-group competition and within-group cooperation is found in 3-10 years old children and the developmental trajectory of such a relationship. We used a large cohort of children (n = 120) and tested whether simulated between-group competition increased within-group cooperation (i.e. how much of a resource children were giving to their group companions) in two experiments. We found greater within-group cooperation when groups of four children were competing with other groups then in the control condition (no between-group competition). Within-group cooperation increased with age. Our study suggests that parochial altruism and in-group/out-group biases emerge early during the course of human development.

Between-group competition elicits within-group cooperation in children

PubMed Central

Majolo, Bonaventura; Maréchal, Laëtitia

2017-01-01

Aggressive interactions between groups are frequent in human societies and can bear significant fitness costs and benefits (e.g. death or access to resources). During between-group competitive interactions, more cohesive groups (i.e. groups formed by individuals who cooperate in group defence) should out-perform less cohesive groups, other factors being equal (e.g. group size). The cost/benefit of between-group competition are thought to have driven correlated evolution of traits that favour between-group aggression and within-group cooperation (e.g. parochial altruism). Our aim was to analyse whether the proximate relationship between between-group competition and within-group cooperation is found in 3–10 years old children and the developmental trajectory of such a relationship. We used a large cohort of children (n = 120) and tested whether simulated between-group competition increased within-group cooperation (i.e. how much of a resource children were giving to their group companions) in two experiments. We found greater within-group cooperation when groups of four children were competing with other groups then in the control condition (no between-group competition). Within-group cooperation increased with age. Our study suggests that parochial altruism and in-group/out-group biases emerge early during the course of human development. PMID:28233820

[Comparative study of complications among routine method,high speed turbine handpiece and piezosurgery device after extraction of impacted wisdom teeth].

PubMed

Guo, Zhao-zhong; Zhang, Heng; Li, Yan; Li, Xin; Liu, Yin; Wang, Yang; Yuan, Chun-xia; Liu, Xue

2012-04-01

To investigate complications in extraction of complicated impacted wisdom teeth whose root apex near to the inferior alveolar nerve(IAN) by using routine method(chisels),high speed turbine handpiece and piezosurgery device respectively. Three hundred qualified patients with impacted wisdom teeth were divided into three groups randomly,one hundred patients in group A were extracted by routine method, one hundred patients in group B were extracted by high speed turbine handpiece, and one hundred patients in group C were extracted by piezosurgery device. The operation time, postoperative pain duration,dry socket and IAN injury were compared between each two groups. All statistical analysis was performed using SPSS 13.0 software package. Differences between groups were compared using a paired t test (quantitative data) or Chi-square test (qualitative data). The operation time in group A was(14.12±0.12)min, (7.22±0.15)min in group B, (25.23±0.32)min in group C; Significant difference was found between group A and group B(P<0.05), group B and group C(P<0.05),group A and group C(P<0.05).Postoperative pain duration was(62.15±1.51)h in group A, (48.23±1.23)h in group B, (14.34±O.80)h in group C; Significant difference was found between group A and group B(P<0.05), group B and group C(P<0.05),group A and group C(P<0.05).9 patients developed dry socket in group A, 2 in group B, and 1 in group C; Significant difference was found between group A and group B(P<0.05), group A and group C(P<0.05). Six patients had IAN injury in group A, 2 in group B, 0 in group C. Significant difference was found between group A and group C. Compared with routine method, high speed turbine is better in extraction of impacted wisdom teeth, which can shorten operation time, lessen postoperative complications. Although there was longer operation time compared with group A and B, piezosurgery device is more effective in reducing postoperative complications.

[Experimental study on avascular necrosis of femoral head in chickens induced by different glucocorticoides].

PubMed

Xiao, Chun-Sheng; Lin, Na; Lin, Shi-Fu; Wan, Rong; Chen, Wei-Heng

2010-03-01

To study the effects of Methylprednisolone and Dexamethasone on the avascular necrosis of femoral head in chickens. Thirty-six chickens were randomly divided into 6 groups (n = 6): control group (group A), Methylprednisolone low dose group (group B), Methylprednisolone large dose group (group C), small dose Dexamethasone and horse serum group (group D), middle dose Dexamethasone and horse serum group (group E), and Dexamethasone large dose group (group F). On the 6th and 12th weeks, blood samples were obtained to determine the level of total cholesterol triglyeride (TG), high density lipoprotein (HDL) and low density lipoprotein (LDL). On the 12th week, femoral heads were taken off. Paraffin tissue sections were prepared to detect histopathologic change with hematoxylin and eosin staining. On the 6th week, compared with group A, the level of CHO increased significantly in group C and group F (P < 0.05), and TG increased in group B, C and group E, while HDL decreased in group B, C and group E. On the 12th week, the level of TG and CHO increased in group B, C, E and group F, and HDL decreased in group C, D and group E (P < 0.05). LDL was not detected in most chickens. The ratio of empty lacuna was higher in group C and group E compared with those of the control group (P < 0.05). Methylprednisolone is easier to induce osteonecrosis of femoral head than Dexamethasone. The condition of metabolic disorder in blood may be the basic pathomechanism of steroid-induced necrosis of femoral head.

[Asymmetric effect of in-group social values on identity with common-identity and common-bond in-groups].

PubMed

Nakashima, Ken'ichiro; Isobe, Chikae; Toshihiko, Souma; Ura, Mitsuhiro

2013-06-01

Moderating effects of group type on the relationship between in-group social values and group identity were investigated. Previous research has indicated that values attached to the in-group, such as its status, privileges, and power, lead to increased group identity. However, these studies have not investigated the role of the type of in-groups on this effect. We conducted an experiment that manipulated the in-group type. In the common-identity type of in-group condition, formation of in- and out-groups on the basis of social categorization was established. In the common-bond type of in-group condition, interactions between the group members were conducted. Results indicated that in the former condition, the degree of in-group social values affected group identity; however, this effect was not found in the latter condition. These results suggest that social values of the in-group have an asymmetric effect on group identity, depending upon the in-group type as a common-identity or common-bond group.

Effect of Different Starvation Levels on Cognitive Ability in Mice

NASA Astrophysics Data System (ADS)

Li, Xiaobing; Zhi, Guoguo; Yu, Yi; Cai, Lingyu; Li, Peng; Zhang, Danhua; Bao, Shuting; Hu, Wenlong; Shen, Haiyan; Song, Fujuan

2018-01-01

Objective: To study the effect of different starvation levels on cognitive ability in mice. Method: Mice were randomly divided into four groups: normal group, dieting group A, dieting group B, dieting group C. The mice of normal group were given normal feeding amount, the rest of groups were given 3/4 of normal feeding amount, 2/4 of normal feeding amount and 1/4 of normal feeding amount. After feeding mice four days, the weight was observed and T-maze experiment, Morris water maze test, open field test and Serum Catalase activity were detected. Result: Compared with the normal group, the correct rate of the intervention group in the T-maze experiment was decreased and dieting group A> dieting group B> dieting group C. In the Morris water maze test, Compared with the normal group, the correct rate of the intervention group was increased. Among these three intervention groups, dieting group A had the highest correct rate and the difference of dieting group B and dieting group C were similar. In the open field test, Compared with the normal group, the exploration rate of the surrounding environment in the intervention group was increased. In the Serum Catalase test, Compared with the normal group, the activities of serum peroxidase in the intervention groups were decreased and dieting group A> dieting group B> dieting group C. Conclusion: A certain level of starvation could affect the cognitive ability of mice. In a certain range, the level of starvation is inversely proportional to cognitive ability in mice.

Territorial choruses of giant otter groups (Pteronura brasiliensis) encode information on group identity.

PubMed

Mumm, Christina A S; Knörnschild, Mirjam

2017-01-01

Group living animals often engage in corporate territorial defence. Territorial group vocalizations can provide information about group identity, size and composition. Neighbouring groups may use this information to avoid unfavourable direct conflicts. Giant otters are highly social and territorial animals with an elaborate vocal repertoire. They produce long-range screams when they are alert or excited, i.e. in an alarm, isolation or begging context. Long-range screams are not only produced by one individual at a time ('single screams') but also by multiple group members simultaneously, resulting in a highly conspicuous 'group chorus'. Wild giant otters regularly produce group choruses during interactions with predators, when they detect intruders in their territory or before group reunions after separation. Since single screams and especially group choruses probably contribute to the groups' corporate territorial defence, we hypothesized that group identity is encoded in single screams and group choruses. We analysed vocalizations from five wild and three captive giant otter groups and found statistical evidence for a group signature in group choruses. Results for single screams were less conclusive, which might have been caused by the comparatively lower sample size. We suggest that giant otters may gain information on group identity by listening to group choruses. Group identity likely constitutes important social information for giant otters since territory boundaries of neighbouring groups can overlap and direct inter-group conflicts are severe. Therefore, group chorusing may contribute to the mutual avoidance of members from different groups.

Fracture resistance of zirconia-based implant abutments after artificial long-term aging.

PubMed

Alsahhaf, Abdulaziz; Spies, Benedikt Christopher; Vach, Kirstin; Kohal, Ralf-Joachim

2017-02-01

To investigate the survival rate, fracture strength, bending moments, loading to fracture and fracture modes of different designs of zirconia abutments after dynamic loading with thermocycling, and compare these values to titanium abutments. A total of 80 abutment samples were divided into 5 test groups of 16 samples in each group. The study included the following groups, "Group 1" CAD/CAM produced all-zirconia abutments, "Group 2" titanium abutments, "Group 3" zirconia-abutments adhesively luted to a titanium base, "Group 4" prefabricated all-zirconia abutments and "Group 5" zirconia-abutments glass soldered to a titanium base. Half the number of samples in each group was exposed to 1.2 million loading cycles (5-years simulation) in the chewing simulator. The samples that survived the artificial aging were later tested for fracture strength in a universal testing machine. The remaining 8 samples of the group were directly tested for fracture strength. All samples exposed to the 5-years artificial aging survived except of six samples in one group (Group 1). The surviving samples were later fracture tested in the universal testing machine. The bending moments (Ncm) values were as follow: Exposed groups: "Group 1" 94.5Ncm; "Group 2" 599.2Ncm; "Group 3" 477.5Ncm; "Group 4" 314.4Ncm; "Group 5" 509.4Ncm. Non-exposed groups: "Group 1" 269.3Ncm; "Group 2" 474.2Ncm; "Group 3" 377.6Ncm; "Group 4" 265.4Ncm; "Group 5" 372.4Ncm. Except in Group 1, the values were higher in the exposed groups, although, statistically there was no difference (p>0.05). The one-piece ZrO2-abutment group (Group 1 and Group 4) exhibited lower values, while the two-piece ZrO2-abutment groups (Group 3 and Group 5) showed similar values and fracture modes like the titanium abutment group. The titanium abutment group showed the highest values of bending moments among all groups. The implant-abutment connection area appeared to influence the bending moment value and the fracture mode of the tested abutment groups, and it was found to be the weakest part of an internal connection one-piece zirconia abutment. The titanium base in the two-piece zirconia abutment worked as a substitute for the weakest part of the abutment. Therefore, the titanium base can reinforce the fracture strength of a zirconia abutment. Copyright © 2016 Elsevier Ltd. All rights reserved.

T-Group and Therapy Group Communication: An Interaction Analysis of the Group Process.

ERIC Educational Resources Information Center

Fisher, B. Aubrey

1979-01-01

Provides an insight into the group process of therapy and compares and contrasts the T-group process with therapy group process. The here-and-now orientation was present in T-group and therapy-group interaction. Greater relational conflict was present in the T-group. Members of the therapy group were much more defensive than members of the…

[Perinatal complications in patients with chronic renal insufficiency on hemodialysis].

PubMed

Vázquez-Rodríguez, Juan Gustavo; del Angel-García, Guadalupe

2010-09-01

Pregnant patients with chronic renal insufficiency treated with hemodialysis experience adverse perinatal results. To compare perinatal complications of patients with chronic renal insufficiency undergoing hemodialysis who become pregnant vs. the complications of women with chronic renal insufficiency not undergoing dialysis but who then require dialysis during gestation. Transversal and retrospective study that included three patients with chronic renal insufficiency on chronic hemodialysis who became pregnant (group A) and three patients with chronic renal insufficiency without hemodialysis at the time of conception but who required dialysis during gestation (group B). Perinatal results were compared. Statistical analysis was performed with measures of central tendency and dispersion and Student t-test. Group A had 25 sessions vs. group B with 29 hemodialysis sessions (p = 0.88). Maternal complications were anemia 100% (six cases), Cesarean delivery 83.3% (group A 2 cases vs. group B 2 cases), preeclampsia 50% (group A 2 cases vs. group B 1 case), uncontrolled hypertension 50% (group A 2 cases vs. group B 1 case), preterm delivery 50% (group A 2 cases vs. group B 1 case), transfusion 33.3% (group A 2 cases), polyhydramnios 33.3% (group A 1 case vs. group B 1 case) and abortion 16.6% (group A 1 case). Fetal complications included fetal loss 16.6% (group A 1 case), neonatal mortality 33.3% (group A 1 cases vs. group B 1 case), prematurity 50% (group A2 cases vs. group B 1 case), fetal distress 50% (group A 1 case vs. group B 2 cases), respiratory failure 33.3% (group A 2 cases) and fetal growth restriction 16.6% (group A 1 case). Frequency of perinatal complications is elevated in both groups.

In-group defense, out-group aggression, and coordination failures in intergroup conflict.

PubMed

De Dreu, Carsten K W; Gross, Jörg; Méder, Zsombor; Giffin, Michael; Prochazkova, Eliska; Krikeb, Jonathan; Columbus, Simon

2016-09-20

Intergroup conflict persists when and because individuals make costly contributions to their group's fighting capacity, but how groups organize contributions into effective collective action remains poorly understood. Here we distinguish between contributions aimed at subordinating out-groups (out-group aggression) from those aimed at defending the in-group against possible out-group aggression (in-group defense). We conducted two experiments in which three-person aggressor groups confronted three-person defender groups in a multiround contest game (n = 276; 92 aggressor-defender contests). Individuals received an endowment from which they could contribute to their group's fighting capacity. Contributions were always wasted, but when the aggressor group's fighting capacity exceeded that of the defender group, the aggressor group acquired the defender group's remaining resources (otherwise, individuals on both sides were left with the remainders of their endowment). In-group defense appeared stronger and better coordinated than out-group aggression, and defender groups survived roughly 70% of the attacks. This low success rate for aggressor groups mirrored that of group-hunting predators such as wolves and chimpanzees (n = 1,382 cases), hostile takeovers in industry (n = 1,637 cases), and interstate conflicts (n = 2,586). Furthermore, whereas peer punishment increased out-group aggression more than in-group defense without affecting success rates (Exp. 1), sequential (vs. simultaneous) decision-making increased coordination of collective action for out-group aggression, doubling the aggressor's success rate (Exp. 2). The relatively high success rate of in-group defense suggests evolutionary and cultural pressures may have favored capacities for cooperation and coordination when the group goal is to defend, rather than to expand, dominate, and exploit.

Me against we: in-group transgression, collective shame, and in-group-directed hostility.

PubMed

Piff, Paul K; Martinez, Andres G; Keltner, Dacher

2012-01-01

People can experience great distress when a group to which they belong (in-group) is perceived to have committed an immoral act. We hypothesised that people would direct hostility toward a transgressing in-group whose actions threaten their self-image and evoke collective shame. Consistent with this theorising, three studies found that reminders of in-group transgression provoked several expressions of in-group-directed hostility, including in-group-directed hostile emotion (Studies 1 and 2), in-group-directed derogation (Study 2), and in-group-directed punishment (Study 3). Across studies, collective shame-but not the related group-based emotion collective guilt-mediated the relationship between in-group transgression and in-group-directed hostility. Implications for group-based emotion, social identity, and group behaviour are discussed.

[Effect of parecoxib on hippocampal inflammation and memory function in aged rats after splenectomy].

PubMed

Li, Peng; Yang, Mengchang; Yang, Xue; Liu, Ziling

2016-06-28

To explore the effect of parecoxib on hippocampal inflammation and short-term memory function after splenectomy in aged rats.
 A total of 90 aged male SD rats were randomly divided into 9 groups (all n=10): a control group (Group C), an anesthesia day 1 group (A1 group), an operation day 1 group (O1 group), a saline day 1 group (S1 group), a parecoxib day 1 group (P1 group), an anesthesia day 3 group (A3 group), an operation day 3 group (O3 group), a saline day 3 group (S3 group), and a parecoxib day 3 group (P3 group). In the A1 group and A3 group, rats were anesthetized by intraperitoneal injection of pentobarbital sodium. Under anesthesia condition, rats in the O1 group and O3 group underwent splenectomy. One hour before splenectomy, rats in the P1 group and P3 group received parecoxib injection of 10 mg/kg via tail vein. In the S1 group and S3 group, rats received the same dose of saline. The rats were trained for 5 days in shuttle box before anesthesia, surgery and drug treatment. After shuttle box test, the rats were killed at postoperative 1 and 3 d. The hippocampus was isolated to measure the CD11b expression by immunofluorescent staining, and TNF-α, IL-1 and COX-2 mRNA expression by RT-PCR.
 Compared with the Group C, the electric shock time was increased in the O1 and O3 groups, but the active escape time was shortened and the active avoidance reaction (AAR) was decreased (all P<0.01). Compared with the O1 or O3 group, the electric shock time was shortened, the active escape time and AAR was increased in the P1 or P3 group (all P<0.05). There were more CD11b positive cells and TNF-α, IL-1β, COX-2 mRNA expression in hippocampus in the O1, O3, S1 or S3 group compared with the Group C (all P<0.01). Both CD11b positive cells and TNF-α, IL-1β, COX-2 mRNA expression were decreased in the P1 or P3 group compared with that in the O1 or O3 group (all P<0.01). 
 The parecoxib could reduce hippocampal inflammation and improve short-term memory function through the inhibition of COX-2 expression in aged rats after splenectomy.

Molecular symmetry: Why permutation-inversion (PI) groups don't render the point groups obsolete

NASA Astrophysics Data System (ADS)

Groner, Peter

2018-01-01

The analysis of spectra of molecules with internal large-amplitude motions (LAMs) requires molecular symmetry (MS) groups that are larger than and significantly different from the more familiar point groups. MS groups are described often by the permutation-inversion (PI) group method. It is shown that point groups still can and should play a significant role together with the PI groups for a class of molecules with internal rotors. In molecules of this class, several simple internal rotors are attached to a rigid molecular frame. The PI groups for this class are semidirect products like H ^ F, where the invariant subgroup H is a direct product of cyclic groups and F is a point group. This result is used to derive meaningful labels for MS groups, and to derive correlation tables between MS groups and point groups. MS groups of this class have many parallels to space groups of crystalline solids.

Roles of participation and feedback in group potency.

PubMed

Gamero, Nuria; Peiró, José M; Zornoza, Ana; Picazo, Carmen

2009-08-01

The roles of group participation and group performance feedback were examined as antecedents of group potency, i.e., beliefs shared among a work group's members about the general effectiveness of the work group. Also examined were how group participation and the congruence of the feedback received from different sources about performance predicted convergence in members' beliefs about group effectiveness. The sample comprised 61 work groups of professionals involved in Master in Business Administration (MBA) programs (284 participants). Mean group size was 4.6 members (SD = .58). 65% of participants were male, and 51% were between 30 and 40 years of age. Data were gathered at two measurement times. Increases in group participation were positively related to increases in group potency and the convergence in beliefs about group effectiveness among group members over time. Results supported the premise that group performance feedback is an antecedent of changes in group potency over time.

Cooperation during cultural group formation promotes trust towards members of out-groups.

PubMed

Pan, Xiaofei Sophia; Houser, Daniel

2013-07-07

People often cooperate with members of their own group, and discriminate against members of other groups. Previous research establishes that cultural groups can form endogenously, and that these groups demonstrate in-group favouritism. Given the presence of cultural groups, the previous literature argues that cultural evolution selects for groups that exhibit parochial altruism. The source of initial variation in these traits, however, remains uninformed. We show here that a group's economic production environment may substantially influence parochial tendencies, with groups formed around more cooperative production (CP) displaying less parochialism than groups formed around more independent production (IP) processes. Participants randomized into CP and IP production tasks formed cultural groups, and subsequently played hidden-action trust games with in-group and out-group trustees. We found CP to be associated with significantly greater sharing and exchanging behaviours than IP. In trust games, significant parochial altruism (in-group favouritism combined with out-group discrimination) was displayed by members of IP groups. By contrast, members of CP groups did not engage in either in-group favouritism or out-group discrimination. Further, we found the absence of out-group discrimination in CP to persist even following 'betrayal'. Finally, belief data suggest that members of CP are not more intrinsically generous than IP members, but rather more likely to believe that out-group trustees will positively reciprocate. Our results have important implications for anyone interested in building cooperative teams, and shed new light on connections between culture and cooperation.

Assessment of Group Preferences and Group Uncertainty for Decision Making

DTIC Science & Technology

1976-06-01

the individ- uals. decision making , group judgments should be preferred to individual judgments if obtaining group judgments costs more. -26- -YI IV... decision making group . IV. A. 3. Aggregation using conjugate distribution. Arvther procedure for combining indivi(jai probability judgments into a group...statisticized group group decision making group judgment subjective probability Delphi method expected utility nominal group 20. ABSTRACT (Continue on

The Effects of Music and Group Stage on Group Leader and Member Behavior in Psychoeducational Groups for Children of Divorce

ERIC Educational Resources Information Center

Cercone, Kristin; DeLucia-Waack, Janice

2012-01-01

This study examined the effects of music and group stage on group process and group leader and member behavior within 8-week psychoeducational groups for children of divorce. Audiotapes of group sessions were rated using the Interactional Process Analysis and the Group Sessions Ratings Scale. Both treatment groups were very similar in terms of…

The effectiveness of multimedia visual perceptual training groups for the preschool children with developmental delay.

PubMed

Chen, Yi-Nan; Lin, Chin-Kai; Wei, Ta-Sen; Liu, Chi-Hsin; Wuang, Yee-Pay

2013-12-01

This study compared the effectiveness of three approaches to improving visual perception among preschool children 4-6 years old with developmental delays: multimedia visual perceptual group training, multimedia visual perceptual individual training, and paper visual perceptual group training. A control group received no special training. This study employed a pretest-posttest control group of true experimental design. A total of 64 children 4-6 years old with developmental delays were randomized into four groups: (1) multimedia visual perceptual group training (15 subjects); (2) multimedia visual perceptual individual training group (15 subjects); paper visual perceptual group training (19 subjects); and (4) a control group (15 subjects) with no visual perceptual training. Forty minute training sessions were conducted once a week for 14 weeks. The Test of Visual Perception Skills, third edition, was used to evaluate the effectiveness of the intervention. Paired-samples t-test showed significant differences pre- and post-test among the three groups, but no significant difference was found between the pre-test and post-test scores among the control group. ANOVA results showed significant differences in improvement levels among the four study groups. Scheffe post hoc test results showed significant differences between: group 1 and group 2; group 1 and group 3; group 1 and the control group; and group 2 and the control group. No significant differences were reported between group 2 and group 3, and group 3 and the control group. The results showed all three therapeutic programs produced significant differences between pretest and posttest scores. The training effect on the multimedia visual perceptual group program and the individual program was greater than the developmental effect Both the multimedia visual perceptual group training program and the multimedia visual perceptual individual training program produced significant effects on visual perception. The multimedia visual perceptual group training program was more effective for improving visual perception than was multimedia visual perceptual individual training program. The multimedia visual perceptual group training program was more effective than was the paper visual perceptual group training program. Copyright © 2013 Elsevier Ltd. All rights reserved.

Cognitive distance, absorptive capacity and group rationality: a simulation study.

PubMed

Curşeu, Petru Lucian; Krehel, Oleh; Evers, Joep H M; Muntean, Adrian

2014-01-01

We report the results of a simulation study in which we explore the joint effect of group absorptive capacity (as the average individual rationality of the group members) and cognitive distance (as the distance between the most rational group member and the rest of the group) on the emergence of collective rationality in groups. We start from empirical results reported in the literature on group rationality as collective group level competence and use data on real-life groups of four and five to validate a mathematical model. We then use this mathematical model to predict group level scores from a variety of possible group configurations (varying both in cognitive distance and average individual rationality). Our results show that both group competence and cognitive distance are necessary conditions for emergent group rationality. Group configurations, in which the groups become more rational than the most rational group member, are groups scoring low on cognitive distance and scoring high on absorptive capacity.

Cognitive Distance, Absorptive Capacity and Group Rationality: A Simulation Study

PubMed Central

Curşeu, Petru Lucian; Krehel, Oleh; Evers, Joep H. M.; Muntean, Adrian

2014-01-01

We report the results of a simulation study in which we explore the joint effect of group absorptive capacity (as the average individual rationality of the group members) and cognitive distance (as the distance between the most rational group member and the rest of the group) on the emergence of collective rationality in groups. We start from empirical results reported in the literature on group rationality as collective group level competence and use data on real-life groups of four and five to validate a mathematical model. We then use this mathematical model to predict group level scores from a variety of possible group configurations (varying both in cognitive distance and average individual rationality). Our results show that both group competence and cognitive distance are necessary conditions for emergent group rationality. Group configurations, in which the groups become more rational than the most rational group member, are groups scoring low on cognitive distance and scoring high on absorptive capacity. PMID:25314132

Bronchial and bronchovascular sleeve resection for treatment of central lung tumors.

PubMed

Lausberg, H F; Graeter, T P; Wendler, O; Demertzis, S; Ukena, D; Schäfers, H J

2000-08-01

To improve postoperative pulmonary reserve, we have employed parenchyma-sparing resections for central lung tumors irrespective of pulmonary function. The results of lobectomy, pneumonectomy, and sleeve resection were analyzed retrospectively. From October 1995 to June 1999, 422 typical lung resections were performed for lung cancer. Of these, 301 were lobectomies (group I), 81 were sleeve resections (group II), and 40 were pneumonectomies (group III). Operative mortality was 2% in group I, 1.2% in group II, and 7.5% in group III (group I and II vs. group III, p<0.03). Mean time of intubation was 1.0+/-4.1 days in group I, 0.9+/-1.3 days in group II, and 3.6+/-11.2 days in group III (groups I and II vs. group III, p<0.01). The incidence of bronchial complications was 1.3% in group I, none in group II, and 7.5% in group III (group I and II vs group III, p<0.001). After 2 years, survival was 64% in group I, 61.9% in group II, and 56.1% in group III (p = NS). Freedom from local disease recurrence was 92.1% in group I, 95.7% in group II, and 90.9% in group III after 2 years (p = NS). Sleeve resection is a useful surgical option for the treatment of central lung tumors, thus avoiding pneumonectomy with its associated risks. Morbidity, early mortality, long-term survival, and recurrence of disease after sleeve resection are similar to those seen after lobectomy.

Choroidal thickness changes determined by EDI-OCT on acute anterior uveitis in patients with HLA-B27-positive ankylosing spondylitis.

PubMed

Basarir, Berna; Celik, Ugur; Altan, Cigdem; Celik, Nimet Burcu

2018-02-01

To evaluate the choroidal thickness on acute anterior uveitis in patients with HLA-B27-positive ankylosing spondylitis. In this study, 32 eyes of 16 HLA-B27 positive AS patients with anterior uveitis and age-matched 19 eyes for control group were analyzed between January 2014 and April 2015. Assessment criteria were uveitis activity, visual acuity, flare existence, subfoveal choroidal thickness and central macular thickness measurements. The mean subfoveal choroidal thicknesses in affected eye group (Group 1), unaffected eye group (Group 2) and control group (Group 3) were 348.31 ± 72.7, 301.12 ± 49.2 and 318.0 ± 74.3, respectively, in active periods. (p = 0.04 between Group 1 and Group 2, p = 0.234 between Group 1 and Group 3) The mean central macular thicknesses of Group 1, Group 2 and Group 3 were 268.50 ± 16.5, 267.31 ± 16.3 and 249.7 ± 30.5, respectively, in active periods. (p = 0.84 between Group 1 and Group 2, p = 0.029 between Group 1 and Group 3). However, in convalescence period, the mean subfoveal choroidal thicknesses of Group 1, Group 2 and Group 3 were 322.40 ± 48.5, 300.75 ± 47.7 and 318.0 ± 74.3, respectively. (p = 0.22 between Group 1 and Group 2, p = 0.854 between Group 1 and Group 3) The mean central macular thicknesses of Group 1, Group 2 and Group 3 were 269.75 ± 21.9, 256.62 ± 21.5 and 249.7 ± 30.5, respectively. (p = 0.09 between Group 1 and Group 2, p = 0.03 between Group 1 and Group 3). In HLA-B27 positive ankylosing spondylitis patients with anterior uveitis, the choroidal thicknesses of the affected eyes were found as thicker than fellow unaffected one or control eyes in active period. The central macular thicknesses are not affected on both active and convalescent period.

Therapeutic effect of magnesium sulphate on carbon monoxide toxicity-mediated brain lipid peroxidation.

PubMed

Yavuz, Y; Mollaoglu, H; Yürümez, Y; Ucok, K; Duran, L; Tünay, K; Akgün, L

2013-02-01

Carbon monoxide (CO) toxicity primarily results from cellular hypoxia caused by impedance of oxygen delivery. Studies show that CO may cause brain lipid peroxidation and leukocyte-mediated inflammatory changes in the brain. The aim of this study was to investigate whether magnesium sulphate could prevent or diminish brain lipid peroxidation caused by carbon monoxide toxicity in rats. Fourty rats were divided into five groups of 8 rats each. Group l was not received any agent during the experiment. Group 2 was inhaled CO gas followed by intraperitoneally normal saline 30 minutes (min) later. Group 3 was inhaled CO gas followed by 100 mg/kg magnesium sulphate intraperitoneally 30 min later. Group 2 and Group 3 rats was undergone laparotomy and craniotomy while still under anesthesia at 6 hour, and tissue sample was obtained from the cerebrum. Group 4 was inhaled CO gas followed by intraperitoneally normal saline 30 min later. Group 5 was inhaled CO gas followed by 100 mg/kg magnesium sulphate intraperitoneally 30 min later. Group 4 and Group 5 rats was undergone laparotomy and craniotomy while still under anesthesia at 24 hour, and tissue sample was obtained from the cerebrum. Nitric oxide levels were no significantly different between all groups. Malonyldialdehyde levels increased in intoxication group (group 2) and decreased in treatment group (group 3). Activities of superoxide dismutase decreased in intoxication group (group 2) and increased in treatment group (group 3). Activities of catalase increased in intoxication group (group 2) and decreased in treatment group (group 3). Activities of glutathione peroxidase (GSH-Px) decreased in intoxication group (group 4) and increased in treatment group (group 5). CO poisoning caused significant damage, detected within the first 6 hours. Due to antioxidant enzymes, especially GSH-Px activity reaching the top level within 24th hours, significant oxidative damage was not observed. The protective effect against oxidative damage of magnesium sulfate has been identified within the first 6 hours.

[Effects of red ginseng on the congestive heart failure and its mechanism].

PubMed

Ding, D Z; Shen, T K; Cui, Y Z

1995-06-01

Forty-five patients with class IV cardiac function were divided into three groups: group I (digoxin group), group II (Red Ginseng group) and group III (Red Ginseng plus digoxin group). Each group consisted of 15 cases. After treatment, the improvement of the hemodynamical and biochemical indexes of group II and group III were greater than those of group I, and group III was the most significant amongst all. The results suggested that Red Ginseng and digoxin had synergism for treatment of congestive heart failure, and Red Ginseng was an effective and safe adjuvant without any side effects.

Fight tactics in wood ants: individuals in smaller groups fight harder but die faster

PubMed Central

Batchelor, Tim P.; Briffa, Mark

2011-01-01

When social animals engage in inter-group contests, the outcome is determined by group sizes and individual masses, which together determine group resource-holding potential (‘group RHP’). Individuals that perceive themselves as being in a group with high RHP may receive a motivational increase and increase their aggression levels. Alternatively, individuals in lower RHP groups may increase their aggression levels in an attempt to overcome the RHP deficit. We investigate how ‘group RHP’ influences agonistic tactics in red wood ants Formica rufa. Larger groups had higher total agonistic indices, but per capita agonistic indices were highest in the smallest groups, indicating that individuals in smaller groups fought harder. Agonistic indices were influenced by relative mean mass, focal group size, opponent group size and opponent group agonistic index. Focal group attrition rates decreased as focal group relative agonistic indices increased and there was a strong negative influence of relative mean mass. The highest focal attrition rates were received when opponent groups were numerically large and composed of large individuals. Thus, fight tactics in F. rufa seem to vary with both aspects of group RHP, group size and the individual attributes of group members, indicating that information on these are available to fighting ants. PMID:21389029

[Effects of the renal blood flow at different levels by transcutaneous electrical acupoint stimulation combined general anesthesia induced controlled hypotension].

PubMed

Fang, Jian-Qiao; Zhang, Le-Le; Shao, Xiao-Mei

2012-11-01

To observe the intervention of transcutaneous electrical acupoint stimulation (TEAS) on the renal blood flow at different levels of mean arterial pressure (MAP) in controlled hypotension. Forty-two male beagle dogs were randomly divided into seven groups, i. e., the general anesthesia group, the 50% controlled group, the 40% controlled group, the 30% controlled group, the 50% experimental group, the 40% experimental group, and the 30% experimental group, 6 in each group. Beagles in the general anesthesia group were not treated with controlled hypotension, and the target MAP was achieved in those of the rest groups and maintained for 60 min. In the experimental groups, TEAS was applied to bilateral Hegu (LI4), Zusanli (ST36), Sanyinjiao (SP6), and Quchi (LI11) at 2/100 Hz with the stimulation strength of (4 +/- 1) mA starting from the stability of their physiological conditions to 60 min of maintaining the target MAP level. The changes of the renal blood flow were monitored at different time points using laser Doppler. From starting pressure control to the target MAP level, the renal blood flow was significantly lower in the 30% controlled group than in the general anesthesia group and the basic level of the same group (P < 0.05), while there was no obvious change in the 30% experimental group. In maintaining the blood pressure, the renal blood flow was significantly lower in the 50% controlled group, the 40% controlled group, the 30% controlled group, and the 30% experimental group than in the general anesthesia group (P < 0.05), while there was no obvious change in the 50% experimental group or the 40% experimental group. By the end of blood pressure recovery, the renal blood flow restored to the basic level in the 50% controlled group, the 50% experimental group, and the 40% experimental group (P > 0.05), while it was not restored to the basic level in the 40% controlled group, the 30% controlled group, and the 30% experimental group (P < 0.05). TEAS combined general anesthesia in controlled hypotension could effectively improve the renal blood flow, thus protecting the kidney.

[Effects of Gukang on bone-source alkaline phosphatase (BALP) and insulin-like growth factor-1 (IGF-1) in serum of spaying rats].

PubMed

Chen, Yi-fan; Huang, Hong-xing; Li, Ying

2009-02-01

To investigate the effects of Gukang on bone-source alkaline phosphatase (BALP) and insulin-like growth factor 1 (IGF-1) in serum of spaying rats and the mechanism of curative effect of Gukang on osteoporosis. Sixty-eight 6-month-old SD rats were chosen and randomly divided into blank control group (22 rats with sham operation) and operation group (46 rats with spaying operation). Three months after operation, 10 rats were randomly chosen from each group and tested with bone mineral density in order to determine models of osteoporosis made. After modeling, operation group was divided into 3 sub-groups: operation model group, estrogen group and Gukang group, 12 rars in each group. Twelve rats remained in blank control group. Every group were treated through intragastric administration therapy (volume 10 ml/kg). Blank control group and operation model group were irrigated with distilled water,estrogen group with estrogen and Gukang group with Gukang. Three months after treatment, serum of all groups were collected and tested for E2, BALP and IGF-1 with ELISA. The concentration of serum E2, BALP in estrogen group and Gukang group were higher than operation model group, there were significant difference (P < 0.05), but no significant difference in serum E2 between estrogen group and Gukang group (P > 0.05). The concentration of serum IGF-1 in Gukang group was higher than operation model group and blank control group, there were significant difference (P < 0.05). Gukang can increase the level of E2, BALP and IGF-1 in serum of spaying rats. Thus, it can indirectly promote reproduction of osteoblasts, inhibit activity of osteoclasts and promote bone formation.

Effect of zinc supplementation on lipid peroxidation and lactate levels in rats with diabetes induced by streptozotocin and subjected to acute swimming exercise.

PubMed

Bicer, M; Gunay, M; Baltaci, A K; Uney, K; Mogulkoc, R; Akil, M

2012-01-01

The present study aims to explore the effect of zinc supplementation on lipid peroxidation and lactate levels in rats having diabetes induced by streptozotocin and subjected to acute swimming exercise. A total of 80 adult male rats of Sprague-Dawley type were equally allocated to 8 groups: Group 1, general control. Group 2, zinc-supplemented group. Group 3, zinc-supplemented, diabetic group. Group 4, swimming control group. Group 5, zinc-supplemented swimming group. Group 6, zinc-supplemented diabetic swimming group. Group 7, diabetic swimming group. Group 8, diabetic group. At the end of the 4-week study, blood samples were collected to determine MDA, GSH, GPx, SOD, lactate and zinc levels. The highest MDA values were found in group 7 and 8 (p<0.001). GSH values in groups 5 and 6 were higher (p<0.001). The highest GPx values were established in groups 2, 5 and 6 (p<0.001). SOD values were the highest in groups 5 and 6 (p<0.001) and lowest in groups 2, 3 and 8 (p<0.001). The highest plasma lactate levels were found in group 7 (p<0.001). The highest zinc levels were obtained in groups 1, 2 and 5 (p<0.001), and the lowest zinc levels were found in groups 7 and 8 (p<0.001). Results of the study reveal that zinc supplementation prevents the increase of free radical formation, suppression of antioxidant activity and muscle exhaustion, all of which result from diabetes and acute exercise. Zinc supplementation may contribute to health performance in diabetes and acute exercise (Tab. 2, Fig. 1 Ref. 47). Full Text in PDF www.elis.sk.

When high achievers and low achievers work in the same group: the roles of group heterogeneity and processes in project-based learning.

PubMed

Cheng, Rebecca Wing-yi; Lam, Shui-fong; Chan, Joanne Chung-yan

2008-06-01

There has been an ongoing debate about the inconsistent effects of heterogeneous ability grouping on students in small group work such as project-based learning. The present research investigated the roles of group heterogeneity and processes in project-based learning. At the student level, we examined the interaction effect between students' within-group achievement and group processes on their self- and collective efficacy. At the group level, we examined how group heterogeneity was associated with the average self- and collective efficacy reported by the groups. The participants were 1,921 Hong Kong secondary students in 367 project-based learning groups. Student achievement was determined by school examination marks. Group processes, self-efficacy and collective efficacy were measured by a student-report questionnaire. Hierarchical linear modelling was used to analyse the nested data. When individual students in each group were taken as the unit of analysis, results indicated an interaction effect of group processes and students' within-group achievement on the discrepancy between collective- and self-efficacy. When compared with low achievers, high achievers reported lower collective efficacy than self-efficacy when group processes were of low quality. However, both low and high achievers reported higher collective efficacy than self-efficacy when group processes were of high quality. With 367 groups taken as the unit of analysis, the results showed that group heterogeneity, group gender composition and group size were not related to the discrepancy between collective- and self-efficacy reported by the students. Group heterogeneity was not a determinant factor in students' learning efficacy. Instead, the quality of group processes played a pivotal role because both high and low achievers were able to benefit when group processes were of high quality.

The Effects of Saccharomyces boulardii on Bacterial Translocation in Rats with Obstructive Jaundice

PubMed Central

Geyik, Mehmet Faruk; Aldemir, Mustafa; Hosoglu, Salih; Ayaz, Celal; Satilmis, Selda; Buyukbayram, Huseyin; Kokoglu, Omer Faruk

2006-01-01

INTRODUCTION The aim of this study was to investigate the effect of Saccharomyces boulardii treatment on preventing bacterial translocation in an obstructive jaundice animal model. MATERIALS AND METHODS Sixty adult rats were divided into five groups: group 1 – the sham-operated group; group 2 – the common bile duct ligation group; group 3 – the S. boulardii group; group 4 – the ampicillin-sulbaktam group; and group 5 – the S. boulardii plus ampicillin-sulbaktam group. The saline, antibiotics and S. boulardii were given, respectively, for a 7-day period as a single dose per day via temporary orogastric intubation. Seven days following the obstructive jaundice, the animal had laparatomy under sterile conditions. Segments of ileum were removed for histopathological examination. Blood, liver, spleen and mesenteric lymph nodes were taken for microbiological culture. RESULTS Bacterial translocation rates were 0% in the sham-operated group, 83% in group 2, 42% in group 3, 42% in group 4 and 33% in group 5. Bacterial translocation significantly increased in group 2 compared to groups 3, 4 and 5 (P = 0.001). The bacterial counts (CFU/g) of group 2 were significantly higher than those of groups 3, 4 and 5 (P = 0.001). Histopathological examination of ileum specimens revealed a significant decrease in the heights of villi in groups 2–5 compared to the sham-operated group (P = 0.001). The mean villus height in groups 3 and 5 was significantly higher than that of group 4 (P = 0.001). CONCLUSIONS S. boulardii was found to be effective in the successful control of translocation and improvement of intestinal barrier function. PMID:16551414

Application of adult attachment theory to group member transference and the group therapy process.

PubMed

Markin, Rayna D; Marmarosh, Cheri

2010-03-01

Although clinical researchers have applied attachment theory to client conceptualization and treatment in individual therapy, few researchers have applied this theory to group therapy. The purpose of this article is to begin to apply theory and research on adult dyadic and group attachment styles to our understanding of group dynamics and processes in adult therapy groups. In particular, we set forth theoretical propositions on how group members' attachment styles affect relationships within the group. Specifically, this article offers some predictions on how identifying group member dyadic and group attachment styles could help leaders predict member transference within the therapy group. Implications of group member attachment for the selection and composition of a group and the different group stages are discussed. Recommendations for group clinicians and researchers are offered. PsycINFO Database Record (c) 2010 APA, all rights reserved

Human cooperation by lethal group competition.

PubMed

Egas, Martijn; Kats, Ralph; van der Sar, Xander; Reuben, Ernesto; Sabelis, Maurice W

2013-01-01

Why humans are prone to cooperate puzzles biologists, psychologists and economists alike. Between-group conflict has been hypothesized to drive within-group cooperation. However, such conflicts did not have lasting effects in laboratory experiments, because they were about luxury goods, not needed for survival ("looting"). Here, we find within-group cooperation to last when between-group conflict is implemented as "all-out war" (eliminating the weakest groups). Human subjects invested in helping group members to avoid having the lowest collective pay-off, whereas they failed to cooperate in control treatments with random group elimination or with no subdivision in groups. When the game was repeated, experience was found to promote helping. Thus, not within-group interactions alone, not random group elimination, but pay-off-dependent group elimination was found to drive within-group cooperation in our experiment. We suggest that some forms of human cooperation are maintained by multi-level selection: reciprocity within groups and lethal competition among groups acting together.

Group heterogeneity increases the risks of large group size: a longitudinal study of productivity in research groups.

PubMed

Cummings, Jonathon N; Kiesler, Sara; Bosagh Zadeh, Reza; Balakrishnan, Aruna D

2013-06-01

Heterogeneous groups are valuable, but differences among members can weaken group identification. Weak group identification may be especially problematic in larger groups, which, in contrast with smaller groups, require more attention to motivating members and coordinating their tasks. We hypothesized that as groups increase in size, productivity would decrease with greater heterogeneity. We studied the longitudinal productivity of 549 research groups varying in disciplinary heterogeneity, institutional heterogeneity, and size. We examined their publication and citation productivity before their projects started and 5 to 9 years later. Larger groups were more productive than smaller groups, but their marginal productivity declined as their heterogeneity increased, either because their members belonged to more disciplines or to more institutions. These results provide evidence that group heterogeneity moderates the effects of group size, and they suggest that desirable diversity in groups may be better leveraged in smaller, more cohesive units.

Team Attributes, Processes, and Values: A Pedagogical Framework

ERIC Educational Resources Information Center

Keyton, Joann; Beck, Stephenson J.

2008-01-01

This article proposes a pedagogical framework to help students analyze their group and team interactions. Intersecting five fundamental group attributes (group size, group goal, group member interdependence, group structure, and group identity) with three overarching group processes (leadership, decision making, and conflict management) creates an…

When are emotions related to group-based appraisals? A comparison between group-based emotions and general group emotions.

PubMed

Kuppens, Toon; Yzerbyt, Vincent Y

2014-12-01

In the literature on emotions in intergroup relations, it is not always clear how exactly emotions are group-related. Here, we distinguish between emotions that involve appraisals of immediate group concerns (i.e., group-based emotions) and emotions that do not. Recently, general group emotions, measured by asking people how they feel "as a group member" but without specifying an object for these emotions, have been conceptualized as reflecting appraisals of group concerns. In contrast, we propose that general group emotions are best seen as emotions about belonging to a group. In two studies, general group emotions were closely related to emotions that are explicitly measured as belonging emotions. Two further studies showed that general group emotions were not related to appraisals of immediate group concerns, whereas group-based emotions were. We argue for more specificity regarding the group-level aspects of emotion that are tapped by emotion measures. © 2014 by the Society for Personality and Social Psychology, Inc.

Opposites Detract: Middle School Peer Group Antipathies

PubMed Central

Laursen, Brett; Bukowski, William M.; Nurmi, Jari-Eri; Marion, Donna; Salmela-Aro, Katariina; Kiuru, Noona

2010-01-01

This study examines variability in patterns of peer group antipathy. Same-grade adolescent peer groups were identified from sociometric nominations of preferred affiliates in a community sample of 600 Finnish 9th grade middle school students (M = 15.0 years-old). Hierarchical linear modeling determined characteristics of youth in actor groups (nominators) that predicted antipathy for youth in target groups (nominatees) on the basis of target group characteristics. Most antipathies were based on dissimilarity between groups representing the mainstream culture and groups opposed to it. The higher a peer group's school burnout, the more its members disliked students in peer groups with higher school grades and students in peer groups with higher sports participation. Conversely, the higher a peer group's school grades, the more its members disliked students in peer groups with higher school burnout. Students in peer groups with less problem behavior disliked students in peer groups with more problem behavior. There was some evidence of rivalry within the mainstream culture: The higher a group's school grades, the more its members disliked those in groups whose members participated in sports. PMID:20378125

Fear acquisition and liking of out-group and in-group members: Learning bias or attention?

PubMed

Koenig, Stephan; Nauroth, Peter; Lucke, Sara; Lachnit, Harald; Gollwitzer, Mario; Uengoer, Metin

2017-10-01

The present study explores the notion of an out-group fear learning bias that is characterized by facilitated fear acquisition toward harm-doing out-group members. Participants were conditioned with two in-group and two out-group faces as conditioned stimuli. During acquisition, one in-group and one out-group face was paired with an aversive shock whereas the other in-group and out-group face was presented without shock. Psychophysiological measures of fear conditioning (skin conductance and pupil size) and explicit and implicit liking exhibited increased differential responding to out-group faces compared to in-group faces. However, the results did not clearly indicate that harm-doing out-group members were more readily associated with fear than harm-doing in-group members. In contrast, the out-group face not paired with shock decreased conditioned fear and disliking at least to the same extent that the shock-associated out-group face increased these measures. Based on these results, we suggest an account of the out-group fear learning bias that relates to an attentional bias to process in-group information. Copyright © 2017 The Authors. Published by Elsevier B.V. All rights reserved.

Morphotaxonomic revision of species-groups of Simulium (Simulium) (Diptera: Simuliidae) in the Oriental Region.

PubMed

Takaoka, Hiroyuki

2017-11-24

Species of eight species-groups (seven named and one unnamed) of Simulium (Simulium) Latreille are revised chiefly based on the adult female and male genitalia. Four species-groups are each divided into more than two groups. Thus, the S. christophersi species-group is divided into two (S. christophersi and S. nebulicola species-groups), the S. griseifrons species-group into six (S. griseifrons, S. grossifilum, S. chungi, S. crocinum, S. indicum and S. yadongense species-groups), the S. malyschevi species-group into two (S. malyschevi and S. pavlovskii species-groups), and the S. melanopus species-group into three (S. melanopus, S. dumogaense and S. iridescens species-groups). The S. crassifilum species-group is merged with the S. variegatum species-group. Simulium fulvipes (Ono) of the former S. malyschevi species-group and S. dentastylum Yang, Chen & Luo of Simulium s. str. species unplaced to species-group are removed from the subgenus Simulium because their male styles are subequal in length to the coxites. A revised classification of species of the 15 species-groups including eight new species-groups of Simulium (Simulium) is presented. Keys to 20 species-groups of Simulium (Simulium) in the Oriental Region are provided for adult females and males.

[Effects of granisetron/lidocaine combination on propofol injection-induced pain: a double-blind randomized clinical trial].

PubMed

Ma, Yu-shan; Lin, Xue-mei; Zhou, Jun

2009-05-01

To investigate the alleviation effect of vein pretreatment and granisetron/lidocaine combination on propofol injection-induced pain. Two hundreds patients scheduled for gynaecological laparoscopic operations were randomly divided into four groups: control group (group I), lidocaine group (group II), granisetron group (group III) and granisetron/lidocaine combination group (group IV), with 50 patients in each group. The patients in the above four groups received placebo (saline), lidocaine 20 mg, granisetron 2 mg and granisetron 2 mg plus lidocaine intravenously respectively. The patients were injected with one-forth of scheduled propofol via a dorsal hand vein after one minute of venous occlusion. The pain during the injection of propofol was evaluated. Pain occurred in 84% of patients in the control group, 46% in the lidocaine group, 52% in the granisetron group and 24% in the granisetron/lidocaine combination group. There was a significant reduction in pain incidence in the three experimental groups compared with the control group (P<0.05). The incidence of pain, nausea, vomiting and shivering was less in the granisetron/lidocaine combination group than in the control group (P<0.05). Pretreatment with granisetron/lidocaine may be effective not only in attenuating pains during i.v. injection of propofol, but also in preventing postoperative nausea, vomiting and shivering.

[The protective effect of XD in ConA-induced liver injury].

PubMed

Liu, Xiao-Bin; Wang, Jing; Zhang, Qian-Qian; Liu, Tao; Dang, Tong-Mei; Cao, Yi-Ming

2010-12-01

To explore the protective effect and its mechanism of Modified Xiaochaihu decoction(MXD) in the liver injury of mice. METHORDS: Using Reitman methord to examine serum ALT and ATS; Using sandwich enzyme immunoassay ABC-ELISA to examine serum TNF-α and IFN-γ. Serum ALT and ATS of MXD large dose group and Xiaochaihu decoction (XD )group were lower than that of animal models group, there was significant difference among groups (P<0.05). There were not significant difference (P>0.05) between serum ALT and ATS of MXD small dose group and that of animal models group; MXD large dose group, XD group and Biphenyldimethylesterate (DDB) group are similar, no difference (P>0.05). Serum TNF-α and IFN-γ of MXD large dose group and XD group were significant lower than that of animal models group, there was significant difference among groups (P<0.05). Serum TNF-α and IFN-γ of XD group ware higher than that of MXD large dose group, there was significant difference among groups (P<0.05). MXD large dose group, XD group and DDB group were similar, no difference. Xiaocaihu decoction possesses the effect of pro2 tection of hepatic impairment and the protective mechanism might be associated with the inhibition of apoptosis and immunomodulation.

Within-group behavioural consequences of between-group conflict: a prospective review.

PubMed

Radford, Andrew N; Majolo, Bonaventura; Aureli, Filippo

2016-11-30

Conflict is rife in group-living species and exerts a powerful selective force. Group members face a variety of threats from extra-group conspecifics, from individuals looking for reproductive opportunities to rival groups seeking resources. Theory predicts that such between-group conflict should influence within-group behaviour. However, compared with the extensive literature on the consequences of within-group conflict, relatively little research has considered the behavioural impacts of between-group conflict. We give an overview of why between-group conflict is expected to influence subsequent behaviour among group members. We then use what is known about the consequences of within-group conflict to generate testable predictions about how between-group conflict might affect within-group behaviour in the aftermath. We consider the types of behaviour that could change and how the role of different group members in the conflict can exert an influence. Furthermore, we discuss how conflict characteristics and outcome, group size, social structure and within-group relationship quality might modulate post-conflict behavioural changes. Finally, we propose the need for consistent definitions, a broader range of examined behaviours and taxa, individual-focused data collection, complementary observational and experimental approaches, and a consideration of lasting effects if we are to understand fully the significant influence of between-group conflict on social behaviour. © 2016 The Author(s).

Within-group behavioural consequences of between-group conflict: a prospective review

PubMed Central

Aureli, Filippo

2016-01-01

Conflict is rife in group-living species and exerts a powerful selective force. Group members face a variety of threats from extra-group conspecifics, from individuals looking for reproductive opportunities to rival groups seeking resources. Theory predicts that such between-group conflict should influence within-group behaviour. However, compared with the extensive literature on the consequences of within-group conflict, relatively little research has considered the behavioural impacts of between-group conflict. We give an overview of why between-group conflict is expected to influence subsequent behaviour among group members. We then use what is known about the consequences of within-group conflict to generate testable predictions about how between-group conflict might affect within-group behaviour in the aftermath. We consider the types of behaviour that could change and how the role of different group members in the conflict can exert an influence. Furthermore, we discuss how conflict characteristics and outcome, group size, social structure and within-group relationship quality might modulate post-conflict behavioural changes. Finally, we propose the need for consistent definitions, a broader range of examined behaviours and taxa, individual-focused data collection, complementary observational and experimental approaches, and a consideration of lasting effects if we are to understand fully the significant influence of between-group conflict on social behaviour. PMID:27903869

Dietary Blueberry and Bifidobacteria Attenuate Nonalcoholic Fatty Liver Disease in Rats by Affecting SIRT1-Mediated Signaling Pathway

PubMed Central

Ren, Tingting; Huang, Chao; Cheng, Mingliang

2014-01-01

NAFLD model rats were established and divided into NAFLD model (MG group), SIRT1 RNAi (SI group), blueberry juice (BJ group), blueberry juice + bifidobacteria (BJB group), blueberry juice + SIRT1 RNAi (BJSI group), and blueberry juice + bifidobacteria + SIRT1 RNAi groups (BJBSI group). A group with normal rats was a control group (CG). BJB group ameliorated NAFLD, which was better than BJ group (P < 0.05). The lipid accumulation was lower in CG, BJ, and BJB groups than that in MG, SI, BJSI, and BJBSI groups (P < 0.05). The levels of SIRT1 and PPAR-α were higher in CG, BJ, and BJB groups than those in MG, SI, BJSI, and BJBSI groups (P < 0.05). The levels of SREBP-1c were lower in CG, BJ, and BJB groups than those in MG, SI, BJSI, and BJBSI groups (P < 0.05). The biochemical indexes SOD, GSH, and HDL-c were improved from CG to BJB group (P < 0.05). Inversely, the levels of AST and ALT, TG, TC, LDL-c, and MDA were decreased from CG to BJB group (P < 0.05). These changes enhance antioxidative capability and biochemical index of rats. Blueberry juice and bifidobacteria improve NAFLD by activating SIRTI-mediating signaling pathway. PMID:25544867

Three new species of Macrelmis Motschulsky (Coleoptera: Elmidae: Elminae) from Southeastern Brazil with new definition of species groups to the genus.

PubMed

Dos Passos, Maria Inês Silva; De Miranda, Gustavo Silva; Nessimian, Jorge Luiz

2015-12-16

Three new species of Macrelmis Motschulsky, 1859 are described and illustrated based on adult males from Rio de Janeiro, Minas Gerais and São Paulo states (southeastern Brazil). A new species groups definition is proposed for the genus, with a redefinition of the former six (aristeae sp. group, celsa sp. group, isus sp. group, granigera sp. group, milleri sp. group and striata sp. group) and designation of four new groups (alea new sp. group, amazonica new sp. group, grandis new sp. group and jureceki new sp. group). The male genitalia of M. clypeata is illustrated for the first time and distributional maps for all species of the genus are provided.

[Mechanism of protective effects of tumor necrosis factor receptor associated protein 1 on hypoxic cardiomyocytes of rats].

PubMed

Xiang, F; Zhang, D X; Ma, S Y; Huang, Y S

2016-12-20

Objective: To investigate the mechanism of protective effects of tumor necrosis factor receptor associated protein 1 (TRAP1) on hypoxic cardiomyocytes of rats. Methods: Primary cultured cardiomyocytes were obtained from neonatal Sprague-Dawley rats (aged 1 to 3 days) and then used in the following experiments. (1) Cells were divided into group TRAP1 and control group according to the random number table (the same grouping method below), and then the total protein of cells was extracted. Total protein of cells in group TRAP1 was added with mouse anti-rat TRAP1 monoclonal antibody, while that in control group was added with the same type of IgG from mouse. Co-immunoprecipitation and protein mass spectrography analysis were used to determine the possible proteins interacted with TRAP1. (2) Cells were divided into normoxia blank control group (NBC), normoxia+ TRAP1 interference control group (NTIC), normoxia+ TRAP1 interference group (NTI), normoxia+ TRAP1 over-expression control group (NTOC), and normoxia+ TRAP1 over-expression group (NTO), with 1 well in each group. Cells in group NBC were routinely cultured, while cells in the latter four groups were respectively added with TRAP1 RNA interference empty virus vector, TRAP1 RNA interference adenovirus vector, TRAP1 over-expression empty virus vector, and TRAP1 over-expression adenovirus vector. Another batch of cells were divided into group NBC, hypoxic blank control group (HBC), hypoxic+ TRAP1 interference control group (HTIC), hypoxic+ TRAP1 interference group (HTI), hypoxic+ TRAP1 over-expression control group (HTOC), and hypoxic+ TRAP1 over-expression group (HTO), with 1 well in each group. Cells in hypoxic groups were under hypoxic condition for 6 hours after being treated as those in the corresponding normoxia groups, respectively. The mRNA expression of cytochrome c oxidase subunit Ⅱ (COXⅡ) of cells in each group was detected by real time fluorescent quantitive reverse transcription polymerase chain reaction. Experiments were repeated for three times. (3) Cells were divided into group NBC, group HBC, group HTOC, group HTO, hypoxic+ TRAP1 over-expression+ COXⅡinterference control group (HTOCIC), and hypoxic+ TRAP1 over-expression+ COXⅡinterference group (HTOCI), with 3 wells in each group. Cells in the previous 4 groups were treated as those in experiment (2). Cells in group HTOCIC and HTOCI were respectively transfected with COXⅡ RNA interference empty virus vector and COXⅡ RNA interference adenovirus vector, and then both added with TRAP1 over-expression adenovirus vector. The proliferation activity of cells was determined by cell counting kit 8 and microplate reader, and the ratio of death cells was measured by propidium lodide and Hoechst 33342 staining. Another batch of cells were divided into group NBC, group HBC, group HTIC, group HTI, hypoxic+ TRAP1 interference+ COXⅡover-expression control group (HTICOC), and hypoxic+ TRAP1 interference+ COXⅡ over-expression group (HTICO), with 3 wells in each group. Cells in the previous 4 groups were treated as those in experiment (2). Cells in group HTICOC and HTICO were both transfected with TRAP1 RNA interference adenovirus vector, and then respectively added with COXⅡ over-expression empty virus vector and COXⅡ over-expression adenovirus vector. The proliferation activity of cells and the ratio of death cells were detected as before. Experiments were repeated for three times. Data were processed with one-way analysis of variance and LSD test. Results: (1) The expression of TRAP1 was found in cells of group TRAP1, while that was not found in cells of control group. The possible proteins interacted with TRAP1 were keratin, COXⅡ, and an unknown protein with predicted molecular weight 13×10 3 . (2) Compared with that in group NBC, the mRNA expression of COXⅡof cells had no significant change in group NTIC and group NTOC (with P values above 0.05), but significantly decreased in group NTI ( P <0.01), and significantly increased in group NTO ( P <0.01). Compared with that in group NBC, the mRNA expression of COXⅡof cells in group HBC was significantly decreased ( P <0.01). Compared with that in group HBC, the mRNA expression of COXⅡof cells had no significant change in group HTIC and group HTOC (with P values above 0.05), but significantly decreased in group HTI ( P <0.01), and significantly increased in group HTO ( P <0.01). (3) The proliferation activity of cells in group NBC, group HBC, group HTOC, group HTO, group HTOCIC, and group HTOCI was respectively 0.498±0.022, 0.303±0.018, 0.313±0.032, 0.456±0.031, 0.448±0.034, and 0.335±0.026, and the ratios of death cells in above groups were respectively (4.7±1.5)%, (24.7±3.1)%, (26.0±2.7)%, (13.3±2.5)%, (12.7±2.1)%, and (21.0±1.7)%. Compared with those in group NBC, the proliferation activity of cells in HBC was decreased, while the ratio of death cells was increased (with P values below 0.01). Compared with those in group HBC, the proliferation activity of cells and the ratio of death cells in group HTOC had no significant change (with P values above 0.05), while the proliferation activity of cells was increased and the ratio of death cells was decreased in group HTO (with P values below 0.01). Compared with those in group HTO, the proliferation activity of cells and the ratio of death cells in group HTOCIC had no significant change (with P values above 0.05), while the proliferation activity of cells was decreased and the ratio of death cells was increased in group HTOCI (with P values below 0.01). (4) The proliferation activity of cells in group NBC, group HBC, group HTIC, group HTI, group HTICOC, and group HTICO was respectively 0.444±0.025, 0.275±0.016, 0.283±0.021, 0.150±0.009, 0.135±0.011, and 0.237±0.017, and the ratios of death cells in above groups were respectively (3.7±0.6)%, (21.0±2.7)%, (20.3±3.1)%, (31.7±2.5)%, (33.3±3.2)%, and (19.3±1.5)%. Compared with those in group HBC, the proliferation activity of cells and the ratio of death cells in group HTIC had no significant change (with P values above 0.05). Compared with those in group HBC and group HTIC, the proliferation activity of cells was decreased and the ratio of death cells was significantly increased in group HTI (with P values below 0.01). Compared with those in group HTI, the proliferation activity of cells and the ratio of death cells in group HTICOC had no significant change (with P values above 0.05), while the proliferation activity of cells was increased and the ratio of death cells was significantly decreased in group HTICO (with P values below 0.01). Conclusions: TRAP1 can up-regulate the expression of COXⅡ mRNA, and COXⅡ is one of the downstream effector molecules that TRAP1 mediates its protective effects on hypoxic cardiomyocytes.

40 CFR 798.2650 - Oral toxicity.

Code of Federal Regulations, 2012 CFR

2012-07-01

...) Control groups. A concurrent control group is required. This group shall be an untreated or sham-treated control group or, if a vehicle is used in administering the test substance, a vehicle control group. If... vehicle control groups are required. (3) Satellite group. (Rodent) A satellite group of 20 animals (10...

40 CFR 798.2650 - Oral toxicity.

Code of Federal Regulations, 2010 CFR

2010-07-01

...) Control groups. A concurrent control group is required. This group shall be an untreated or sham-treated control group or, if a vehicle is used in administering the test substance, a vehicle control group. If... vehicle control groups are required. (3) Satellite group. (Rodent) A satellite group of 20 animals (10...

40 CFR 798.2650 - Oral toxicity.

Code of Federal Regulations, 2013 CFR

2013-07-01

...) Control groups. A concurrent control group is required. This group shall be an untreated or sham-treated control group or, if a vehicle is used in administering the test substance, a vehicle control group. If... vehicle control groups are required. (3) Satellite group. (Rodent) A satellite group of 20 animals (10...

40 CFR 798.2650 - Oral toxicity.

Code of Federal Regulations, 2014 CFR

2014-07-01

...) Control groups. A concurrent control group is required. This group shall be an untreated or sham-treated control group or, if a vehicle is used in administering the test substance, a vehicle control group. If... vehicle control groups are required. (3) Satellite group. (Rodent) A satellite group of 20 animals (10...

40 CFR 798.2650 - Oral toxicity.

Code of Federal Regulations, 2011 CFR

2011-07-01

...) Control groups. A concurrent control group is required. This group shall be an untreated or sham-treated control group or, if a vehicle is used in administering the test substance, a vehicle control group. If... vehicle control groups are required. (3) Satellite group. (Rodent) A satellite group of 20 animals (10...

Small Group Cooperative Curriculum and Experimental Evaluation; A Study of Cooperation Training. Final Report.

ERIC Educational Resources Information Center

Bloom, Joan R.; And Others

This report describes a project to test the effectiveness of a small-group curriculum designed to teach cooperative group work. The sample of 53 groups of boys and 47 groups of girls was assigned to one of three conditions: (a) established groups, (b) ad hoc groups, and (c) control condition groups. Groups who had training were predicted to choose…

[Total flavones derived from Lagotis brevituba maxim reduce the levels of inflammatory cytokines in cerebral cortex and hippocampus of Alzheimer's disease mice].

PubMed

Yang, Bailing; Hou, Qian; Hu, Feng; Zhang, Fan

2016-07-01

Objective To investigate the mechanism behind the treatment of Alzheimer's disease (AD) with total flavones derived from Lagotis brevituba maxim (TF-LBM). Methods Fifty SAMP8 mice (aged 8 months) were randomly divided into 5 groups, (150, 300, 600) mg/kg TF-LBM groups, 0.65 g/kg donepezil HCl group and AD model group; 10 SAMR1 mice (aged 8 months) were used as a control group of normal aging. The AD model group and the normal aging control group were given the same volume of distilled water as TF-LBM groups. Eight weeks after intragastric administration, Morris water maze experiment was conducted to calculate the latency of place navigation. After the behavioral experiment, the brain cortical tissue and hippocampus (CA1 region) of the mice from various groups were taken to observe the morphological changes of the cortical tissue and hippocampus and test IL-1β, IL-6, TNF-α content. Results Compared with the model group, the escape latency of the normal aging group, the high-dose TF-LBM group and the donepezil HCl group were evidently shortened; compared with the normal aging group, IL-1β, IL-6, TNF-αof the model group increased significantly; compared with the model group, IL-1β content of the low-dose TF-LBM group had no obvious difference, while IL-1β content of the median-dose and high-dose TF-LBM groups and the donepezil HCl group decreased significantly; IL-6 content decreased in all TF-LBM groups and the donepezil HCl group; TNF-α level in the low-dose and median-dose TF-LBM groups had no evident difference, while it was reduced significantly in the high-dose TF-LBM group and the donepezil HCl group. Compared with the normal aging group, IL-1β, IL-6 and TNF-α content of the model group increased significantly; compared with the model group, IL-1β, IL-6 and TNF-α content of all TF-LBM groups and the donepezil HCl group decreased. Conclusion TF-LBM can improve the behavior change of SAMP8 mice with AD. TF-LBM can reduce the content of IL-6, IL-1β and TNF-α in cerebral cortex and hippocampus CA1.

The standardized live patient and mechanical patient models--their roles in trauma teaching.

PubMed

Ali, Jameel; Al Ahmadi, Khalid; Williams, Jack Ivan; Cherry, Robert Allen

2009-01-01

We have previously demonstrated improved medical student performance using standardized live patient models in the Trauma Evaluation and Management (TEAM) program. The trauma manikin has also been offered as an option for teaching trauma skills in this program. In this study, we compare performance using both models. Final year medical students were randomly assigned to three groups: group I (n = 22) with neither model, group II (n = 24) with patient model, and group III (n = 24) with mechanical model using the same clinical scenario. All students completed pre-TEAM and post-TEAM multiple choice question (MCQ) exams and an evaluation questionnaire scoring five items on a scale of 1 to 5 with 5 being the highest. The items were objectives were met, knowledge improved, skills improved, overall satisfaction, and course should be mandatory. Students (groups II and III) then switched models, rating preferences in six categories: more challenging, more interesting, more dynamic, more enjoyable learning, more realistic, and overall better model. Scores were analyzed by ANOVA with p < 0.05 being considered statistically significant. All groups had similar scores (means % +/- SD)in the pretest (group I - 50.8 +/- 7.4, group II - 51.3 +/- 6.4, group III - 51.1 +/- 6.6). All groups improved their post-test scores but groups II and III scored higher than group I with no difference in scores between groups II and III (group I - 77.5 +/- 3.8, group II - 84.8 +/- 3.6, group III - 86.3 +/- 3.2). The percent of students scoring 5 in the questionnaire are as follows: objectives met - 100% for all groups; knowledge improved: group I - 91%, group II - 96%, group III - 92%; skills improved: group I - 9%, group II - 83%, group III - 96%; overall satisfaction: group I - 91%, group II - 92%, group III - 92%; should be mandatory: group I - 32%, group II - 96%, group III - 100%. Student preferences (48 students) are as follows: the mechanical model was more challenging (44 of 48); more interesting (40 of 48); more dynamic (46 of 48); more enjoyable (48 of 48); more realistic (32/48), and better overall model (42 of 48). Using the TEAM program, we have demonstrated that improvement in knowledge and skills are equally enhanced by using mechanical or patient models in trauma teaching. However, students overwhelmingly preferred the mechanical model.

The effect of tourniquet usage on cement penetration in total knee arthroplasty: A prospective randomized study of 3 methods.

PubMed

Ozkunt, Okan; Sariyilmaz, Kerim; Gemalmaz, Halil Can; Dikici, Fatih

2018-01-01

It is a randomized study to compare cement penetration on x-rays after total knee arthroplasty (TKA) among 3 different ways to use tourniquets; application during the surgery, application only with implantation prosthesis and with no tourniquet use. A total 69 knees of 59 patients were included in the study in a quasirandom manner. Each patient had physical exams and standard radiographic evaluations at 6 weeks after the TKA procedure. Outcome evaluations included visual analog scale (VAS) scores, Knee Society Scores (KSS), blood transfusion, and drainage status after surgery for all groups. For radiographic review, the tibial plateau was divided into zones in the anterior-posterior and lateral views, according to the Knee Society Scoring System. The average age of the patients who were eligible for the study was 65.05 (range 46-81) years. All 59 patients included in the study were female patients. Group 1 consisted of 24 patients who had TKA with use of a tourniquet during the entire operation. Group 2 consisted of 20 patients who had TKA with use of tourniquet only at the time of cementing and group 3 consisted of 25 patients with no use tourniquet. There is no significant difference in early cement penetration among the groups (group 1 2.50 mm, group 2 2.28 mm, group 3 2.27 mm; group 1 vs 2 P = .083, group 1 vs 3 P = .091, group 2 vs 3 P = .073). There is no significant difference for postoperative drainage among the 3 groups (group 1 245 mL, group 2 258.76 mL, group 3 175.88 mL; group 1 vs 2 P = .081, group 1 vs 3 P = .072, group 2 vs 3 P = .054). There was no need to transfuse more than 1 unit in any patient. The VAS score was significantly higher (group 1 3.58, group 2 1.55, group 3 1.52; group 1 vs 2 P = .022, group 1 vs 3 P = .018, group 2 vs 3 P = .062) and KSS was significantly lower in the tourniquet group (group 1 63, group 2 79, group 3 82; group 1 vs 2 P = .017, group 1 vs 3 P = .02, group 2 vs 3 P = .082). We do not suggest long-duration tourniquet use, which can lead higher pain scores and reduce functional recovery after total knee arthroplasty.

Individualized nutrition intervention is of major benefit to colorectal cancer patients: long-term follow-up of a randomized controlled trial of nutritional therapy.

PubMed

Ravasco, Paula; Monteiro-Grillo, Isabel; Camilo, Maria

2012-12-01

In our published randomized trial in colorectal cancer, group 1 (n = 37) received individualized nutritional counseling and education about regular foods, group 2 (n = 37) received dietary supplements and consumed their usual diet of regular foods, and group 3 (n = 37) consumed their usual diet of regular foods. Neither group 2 nor group 3 received individualized counseling. Early nutritional counseling during radiotherapy was highly effective at reducing acute radiotherapy toxicity and improving nutritional intake/status and quality of life (QoL). Efficacy persisted for 3 mo after the intervention. The objective was to perform long-term follow-up in survivors of that clinical trial to specifically evaluate survival, late toxicity, QoL, and nutritional variables. Medical data were collected from patients' records, and prescheduled interviews were conducted by dietitians for individualized evaluations. Analyses and comparisons between groups (adjusted for stage) were performed after a median follow-up of 6.5 (range: 4.9-8.1) y. Patients complied with the Radiotherapy Department's follow-up protocol. Nutritional deterioration was higher (P < 0.001) in group 3 (n = 26) and group 2 (n = 29) than in group 1 (n = 34). Adequate nutritional status was maintained in 91% of group 1 patients but not in any of the group 3 patients (P < 0.002). Intakes in group 1 were similar to reference values, and the patients adhered to the prescribed recommendations. Intakes in groups 2 and 3 were lower than recommended intakes: group 3 ≃ group 2 < group 1 (P = 0.001). Median survival in group 3 was 4.9 y (30% died), in group 2 was 6.5 y (22% died), and in group 1 was 7.3 y (only 8% died): group 3 > group 2 > group 1 (P < 0.01). Late radiotherapy toxicity was higher in group 3 (n = 17; 65%) and group 2 (n = 17; 59%) than in group 1 (n = 3; 9%): group 3 ≃ group 2 > group 1 (P < 0.001). QoL was worse in groups 3 and 2 than in group 1: group 3 ≃ group 2 < group 1 (P < 0.002). Worse radiotherapy toxicity, QoL, and mortality were associated with deteriorated nutritional status and intake (P < 0.001). Likewise, depleted intake, nutritional status, and QoL predicted shorter survival and late toxicity (HR: 8.25; 95% CI: 2.74, 1.47; P < 0.001). This study conveys novel information about the effectiveness of nutrition at improving long-term prognosis in colorectal cancer. Overall, the data indicate that early individualized nutritional counseling and education during radiotherapy is valuable for patients.

[Integripetal rhodiola herb attenuates high altitude-induced pulmonary arterial remodeling and expression of vascular endothelial growth factor in rats].

PubMed

Bai, Ma-Kang-Zhuo; Guo, Yan; Bian, Ba-Dun-Zhu; Dong, Hai; Wang, Tao; Luo, Feng; Wen, Fu-Qiang; Cui, Chao-Ying

2011-04-25

The aim of this study was to investigate the effect of integripetal rhodiola herb on pulmonary arterial remodeling and expression of vascular endothelial growth factor (VEGF) in high altitude pulmonary hypertension in rats. Fifty healthy male Wistar rats were divided into five groups randomly: Plain control group (LC group), 10-day plateau group (H(10) group), 30-day plateau group (H(30) group), 10-day rhodiola-treated plateau group (R(10) group), and 30-day rhodiola-treated plateau group (R(30) group). Each group included 10 rats. The rats in LC group were kept in Chengdu (500 meters above sea level), and rats in H and R groups were kept in Lhasa (3 700 meters above sea level). The rats in R group were daily treated with integripetal rhodiola herb extract (24%, 10 mL/kg) intragastrically for 10 d or 30 d, while rats in LC and H groups were treated with the same volume of saline. Mean pulmonary arterial pressure (mPAP) was detected via a catheter in the pulmonary artery by pressure waveform monitoring. The ratio value of right ventricle weight to left ventricle plus septum weight [RV/(LV + S)] was measured. The microstructure of pulmonary arterioles was examined by electron microscopy. The expression of VEGF in the lung was investigated using immunohistochemistry. The results showed that mPAP and [RV/(LV + S)] in H(10) group and H(30) group were higher than those in LC group (P < 0.05); but there was no significant difference between H(10) group and R(10) group (P < 0.05); and mPAP and [RV/(LV + S)] in H(30) group were lower than those in H(30) group (P < 0.05). Electron microscopy showed that compared to LC group, arteriolar endothelial cells were arranged in a columnar or palisading form, protruding into the lumen, accompanied with luminal stenosis, irregular internal elastic membrane, and proliferation of vascular smooth muscle cells in H groups, which was more obvious in H(30) group than in H(10) group; while these pathological changes were attenuated in the R groups compared to H groups. The levels of VEGF protein in H groups were also higher than those in LC group (P < 0.05); while the expression of VEGF in R(30) group was lower than that in H(30) group. In summary, the results show that the integripetal rhodiola herb can attenuate high altitude-induced pulmonary arterial remodeling in rats, and the inhibition of VEGF protein expression by rhodiola may be one of the mechanisms.

[CHANGES OF SEMAPHORIN 3A EXPRESSION IN HEALING OF TIBIA FRACTURE AFTER TRAUMATIC BRAIN INJURY].

PubMed

Li, Zhengzheng; Zhao, Junwei; Yi, Zhigang; Luo, Wei; Li, Kang; Wang, Yuliang; Wang, Jing; An, Liping; Ma, Jinglin

2016-10-08

To investigate the mechanism of Semaphorin 3A (Sema3A) in fracture healing after nerve injury by observing the expression of Sema3A in the tibia fracture healing after traumatic brain injury (TBI). A total of 192 Wistar female rats, 8-10 weeks old and weighing 220-250 g, were randomly divided into tibia fracture group (group A, n =48), TBI group (group B, n =48), TBI with tibia fracture group (group C, n =48), and control group (group D, n =48). The tibia fracture model was established at the right side of group A; TBI model was made in group B by the improved Feeney method; the TBI and tibia fracture model was made in group C; no treatment was given in group D. The tissue samples were respectively collected at 3, 5, 7, 14, 21, and 28 days after operation; HE staining, immunohistochemistry staining, and Western blot method were used for the location and quantitative detection of Sema3A in callus tissue. HE staining showed that no obvious changes were observed at each time point in groups B and D. At 3 and 5 days, there was no obvious callus growth at fracture site with inflammatory cells and fibrous tissue filling in groups A and C. At 7 and 14 days, fibrous tissue grew from periosteum to fracture site in groups A and C; the proliferation of chondrocytes in exterior periosteum gradually formed osteoid callus at fracture site in groups A and C. The chondrocyte had bigger size, looser arrangement, and more osteoid in group C than group A. Group B had disorder periosteum, slight subperiosteal bone hyperplasia, and no obvious change of bone trabecula in group B when compared with group D. At 21 and 28 days, cartilage callus was gradually replaced by new bone trabecula in groups A and C. Group C had loose arrange, disorder structure, and low density of bone trabecula, big callus area and few chondrocyte and osteoid when compared with group A; group B was similar to Group D. Immunohistochemistry staining showed that Sema3A expression in chondrocytes in group C was higher than that in group A, particularly at 7, 14, and 21 day. Sema3A was significantly higher in osteoblasts of new bone trabecula in group A than group C, especially at 14 and 21 days ( P <0.05). Western blot results showed that the Sema3A had the same expression trend during fracture healing in groups A and C. However, the expression of Sema3A protein was significantly higher in group C than group A ( P <0.05) and in group B than group D ( P <0.05) at 7, 14, 21, and 28 days. Abnormal expression of Sema3A may play a role in fracture healing after nerve injury by promoting the chondrocytes proliferation and reducing the distribution of sensory nerve fibers and osteoblast differentiation.

[Effect of jingui shenqi pill and its disassembled recipes on ovarian functions in shen yang deficiency female rats].

PubMed

Long, Yong-Ling; Li, Zheng-Mu

2013-07-01

To observe the effect of Jingui Shenqi Pill (JSP) and its disassembled recipes (supplementing Shen yang, supplementing Shen yin, and supplementing Shen yang and Shen yin) on ovarian functions of female rats of Shen yang deficiency syndrome (SYDS). Totally 55 SD female rats were randomly divided into 5 groups, i.e., the normal control group, the model group, the Shen yang supplementing group, the Shen yin supplementing group, the Shen yang and Shen yin supplementing group, 11 in each group. Except the normal control group, rats in the rest group were injected with hydrocortisone at the daily dose of 25 mg/kg at the muscle of femoribus internus for 12 successive days. From the 13th day after successful modeling, rats were administered by gastrogavage with different recipes at the dose of 1 mL/100 g (2.75 g/kg Shen yang supplementing recipe; 6.25 g/kg Shen yin supplementing recipe; 6.75 g/kg JSP), once daily for 20 successive days. Equal volume of normal saline was given to those in the normal control group and the model group, once daily for 20 successive days. Blood was withdrawn from the orbit on the 2nd day after intervention. The serum estradiol (E2) and progesterone (P) were detected using ELISA. The weight of uterus and ovarian index (VI) were calculated. The pathological changes were observed by HE staining. The general condition of rats in the Shen yang and Shen yin supplementing group were improved. The body weight (g) was added by 35.0 +/- 12.5 in the normal control group, 16.7 +/- 7.4 in the model group, 20.2 +/- 6.9 in the Shen yang supplementing group, 18.3 +/- 3.6 in the Shen yin supplementing group, and 29.4 +/- 12.2 in the Shen yang and Shen yin supplementing group. The uterus VI (mg/100 g) was 183.4 +/- 11.6 in the normal control group,144.0 +/- 6.5 in the model group,158.7 +/- 6.3 in the Shen yang supplementing group,152.1 +/- 6.9 in the Shen yin supplementing group, and 172.8 +/- 8.1 in the Shen yang and Shen yin supplementing group. The ovarian VI (mg/100 g) were 32.9 +/- 2.4 in the normal control group, 22.6 +/- 1.1 in the model group, 25.0 +/- 1.4 in the Shen yang supplementing group, 23.0 +/- 0.4 in the Shen yin supplementing group, and 31.4 +/- 3.3 in the Shen yang and Shen yin supplementing group. Compared with the model group, the body weight and ovarian VI increased in the Shen yang supplementing group and the Shen yang and Shen yin supplementing group (P < 0.05, P < 0.01). The uterus VI increased in each medicated group (P < 0.05, P < 0.01). Compared with the Shen yang supplementing group and the Shen yin supplementing group, all indices increased in the Shen yang and Shen yin supplementing group (P < 0.05, P < 0.01). The E2 and P levels increased in the Shen yang supplementing group and the Shen yang and Shen yin supplementing group (P < 0.05, P < 0.01). The content of E2 (pg/mL) was 22.1 +/- 9.4 in the normal control group, 9.8 +/- 3.0 in the model group, 11.3 +/- 2.2 in the Shen yang supplementing group, 10.5 +/- 0.8 in the Shen yin supplementing group, and 16.0 +/- 5.5 in the Shen yang and Shen yin supplementing group. The content of P (ng/mL) was 14.6 +/- 7.5 in the normal control group, 4.3 +/- 1.8 in the model group, 8.3 +/- 2.8 in the Shen yang supplementing group, 5.9 +/- 2.9 in the Shen yin supplementing group, and 9.5 +/- 3.4 in the Shen yang and Shen yin supplementing group. Compared with the Shen yang supplementing group and the Shen yin supplementing group, the E2 level increased in the Shen yang and Shen yin supplementing group (P < 0.05, P < 0.01). Compared with the Shen yin supplementing group, the P level increased in the Shen yang and Shen yin supplementing group (P < 0.05). Compared with the model group, the ovarian follicle at each stage increased and pathological follicular ovarian follicles decreased in the Shen yang and Shen yin supplementing group (P < 0.01). Less primary follicles, secondary follicles, and mature follicles could be seen in the Shen yang supplementing group and the Shen yin supplementing group. The total numbers of all-level follicles were obviously higher in the Shen yang and Shen yin supplementing group than in the Shen yang supplementing group and the Shen yin supplementing group (P < 0.05). The number of pathological follicles was obviously less in the Shen yang and Shen yin supplementing group than in the Shen yin supplementing group (P < 0.05). As for SYDS, JSP and its dissembled recipes could improve damaged ovarian functions to some degree. But better effect could not be obtained by Shen yang supplementing method or Shen yin supplementing method alone. Shen yang and Shen yin supplementing method could elevate the efficacy.

[Effects of glutamine induced heat shock protein 70 overexpression on atrial fibrosis and connexin 43 remodeling in isoprenaline-treated rats].

PubMed

Bao, Hong-Gang; Zhang, Wei-Ze; Ma, Ling; Li, Tao; Wang, Fei; Chen, Yong-Qing

2013-04-01

To explore the effects of glutamine (Gln) induced heat shock protein 70(Hsp70) overexpression on atrial fibrosis and connexin 43 remodeling in isoprenaline(ISO)treated rats and related mechanisms. Forty male SD rats were randomly divided into five groups (n = 8 each group): control group, DMSO group, ISO 5 mg×kg(-1)×d(-1) group (Fibrosis group), ISO 5 mg×kg(-1)×d(-1) + Ala-Gln 0.75 mg×kg(-1)×d(-1) group (Intervention group) and ISO 5 mg×kg(-1)×d(-1) + QUE 100 mg× kg(-1)×d(-1) + Ala-Gln 0.75 mg×kg(-1)×d(-1) + DMSO group (QUE group).Rats were killed after 7 d. The AngII expression in myocardial tissue was detected by radioimmunoassay; myocardial fibrosis was observed by HE staining.Collagen volume fractions were quantified by Masson staining and as the indicators of atrial fibrosis. The expressions of Hsp70, p-JNK1/2/3, c-Jun and Cx43 were determined with immunohistochemical method. AngII content was similar between the control group [(68.51 ± 10.76) pg/L] and DMSO [(71.47 ± 11.49) pg/L] group (P > 0.05), and significantly increased in fibrosis group [(211.25 ± 49.49) pg/L], intervention group [(185.32 ± 54.85) pg/L] and QUE [(189.90 ± 42.12) pg/L] group (P < 0.01 vs. control group). Atrial fibrosis was significantly higher in the fibrosis group [(29.485 ± 9.966)%] and QUE group [(25.060 ± 8.581)%] but not in the intervention group [(7.861 ± 1.867)%] compared to control group [(6.842 ± 1.674)%] and DMSO group [(7.108 ± 1.343)%]. The expression of Hsp70 was similar among the control group (0.160 ± 0.023), DMSO group (0.163 ± 0.022), fibrosis group (0.166 ± 0.028) and QUE (0.168 ± 0.027) group (P > 0.05) while significantly upregulated in the intervention group (0.215 ± 0.018) (P < 0.01 vs. control group). The expressions of p-JNK1/2/3 and c-Jun were similar between control group (0.151 ± 0.016;0.163 ± 0.022) and DMSO group (0.154 ± 0.021;0.164 ± 0.024)(P > 0.05), while significantly upregulated in fibrosis group (0.202 ± 0.025; 0.254 ± 0.044) and QUE group (0.196 ± 0.024; 0.251 ± 0.027) (P < 0.01 vs. control group) but not in intervention group (0.160 ± 0.025; 0.168 ± 0.024)were not changed obviously (P > 0.05 vs. control group). The content of Cx43 was similar between control group and DMSO group (0.231 ± 0.035 vs. 0.220 ± 0.032, P > 0.05), and was linearly distributed in intercalated disc of the cardiomyocytes, however, the content of Cx43 was significantly reduced (P < 0.01) and the Cx43 distribution was disordered in fibrosis group (0.163 ± 0.013) and QUE group (0.165 ± 0.024), while these changes were not found in intervention group. Glutamine could reduce the atrial fibrosis and Cx43 remodeling in isoprenaline-treated rats by up-regulating Hsp70 and inhibiting JNK signaling pathway activation through down-regulating p-JNK1/2/3 and c-Jun expression.

Human cooperation by lethal group competition

PubMed Central

Egas, Martijn; Kats, Ralph; van der Sar, Xander; Reuben, Ernesto; Sabelis, Maurice W.

2013-01-01

Why humans are prone to cooperate puzzles biologists, psychologists and economists alike. Between-group conflict has been hypothesized to drive within-group cooperation. However, such conflicts did not have lasting effects in laboratory experiments, because they were about luxury goods, not needed for survival (“looting”). Here, we find within-group cooperation to last when between-group conflict is implemented as “all-out war” (eliminating the weakest groups). Human subjects invested in helping group members to avoid having the lowest collective pay-off, whereas they failed to cooperate in control treatments with random group elimination or with no subdivision in groups. When the game was repeated, experience was found to promote helping. Thus, not within-group interactions alone, not random group elimination, but pay-off-dependent group elimination was found to drive within-group cooperation in our experiment. We suggest that some forms of human cooperation are maintained by multi-level selection: reciprocity within groups and lethal competition among groups acting together. PMID:23459158

Ganging up or sticking together? Group processes and children's responses to text-message bullying.

PubMed

Jones, Siân E; Manstead, Antony S R; Livingstone, Andrew G

2011-02-01

Drawing on social identity theory and intergroup emotion theory (IET), we examined group processes underlying bullying behaviour. Children were randomly assigned to one of three groups: a perpetrator's group, a target's group, or a third party group. They then read a gender-consistent scenario in which the norm of the perpetrator's group (to be kind or unkind towards others) was manipulated, and an instance of cyberbullying between the perpetrator's group and a member of the target's group was described. It was found that group membership, group norms, and the proposed antecedents of the group-based emotions of pride, shame, and anger (but not guilt) influenced group-based emotions and action tendencies in ways predicted by social identity and IET. The results underline the importance of understanding group-level emotional reactions when it comes to tackling bullying, and show that being part of a group can be helpful in overcoming the negative effects of bullying. ©2010 The British Psychological Society.

21 CFR 874.3320 - Group hearing aid or group auditory trainer.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 21 Food and Drugs 8 2011-04-01 2011-04-01 false Group hearing aid or group auditory trainer. 874... SERVICES (CONTINUED) MEDICAL DEVICES EAR, NOSE, AND THROAT DEVICES Prosthetic Devices § 874.3320 Group hearing aid or group auditory trainer. (a) Identification. A group hearing aid or group auditory trainer...

21 CFR 874.3320 - Group hearing aid or group auditory trainer.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 21 Food and Drugs 8 2012-04-01 2012-04-01 false Group hearing aid or group auditory trainer. 874... SERVICES (CONTINUED) MEDICAL DEVICES EAR, NOSE, AND THROAT DEVICES Prosthetic Devices § 874.3320 Group hearing aid or group auditory trainer. (a) Identification. A group hearing aid or group auditory trainer...

21 CFR 874.3320 - Group hearing aid or group auditory trainer.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 21 Food and Drugs 8 2014-04-01 2014-04-01 false Group hearing aid or group auditory trainer. 874... SERVICES (CONTINUED) MEDICAL DEVICES EAR, NOSE, AND THROAT DEVICES Prosthetic Devices § 874.3320 Group hearing aid or group auditory trainer. (a) Identification. A group hearing aid or group auditory trainer...

21 CFR 874.3320 - Group hearing aid or group auditory trainer.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Group hearing aid or group auditory trainer. 874... SERVICES (CONTINUED) MEDICAL DEVICES EAR, NOSE, AND THROAT DEVICES Prosthetic Devices § 874.3320 Group hearing aid or group auditory trainer. (a) Identification. A group hearing aid or group auditory trainer...

Some Critical Differences between Self-Help and Therapy Groups.

ERIC Educational Resources Information Center

Riordan, Richard J.; Beggs, Marilyn S.

1988-01-01

Presents a scheme for addressing differences between self-help groups and therapy groups, characterizing a list of group work parameters according to emphasis placed on each in therapy groups in contrast with self-help groups. Distinguishes between support groups, started by professional helping organizations or individuals, and self-help groups,…

Using Telestrations™ to Illustrate Small Group Communication Principles

ERIC Educational Resources Information Center

Fedesco, Heather Noel

2014-01-01

This single class activity described here: (1) illustrates the importance of interdependence in groups; (2) can be used to measure group productivity and performance; (3) can encourage groups to engage in group learning; and (4) can facilitate group cohesion for newly formed groups. Students will be working in groups for the majority of their…

Deviance as adherence to injunctive group norms: the overlooked role of social identification in deviance.

PubMed

Crane, Monique F; Platow, Michael J

2010-12-01

We currently report three studies investigating group members' expressions of dissatisfaction and discontent with the behaviour and attitudes of their in-group members. Our analysis examines the context in which group members will deviate from actual group member behaviour. We argue that highly identifying group members will challenge fellow group member behaviour when that group member behaviour is perceived to violate injunctive group norms. Further, we predicted that high identifiers would still challenge such group member behaviour even if that behaviour were conducted by a majority of group members. Thus, high identifiers were predicted to express descriptively deviant opinions when the behaviour of other members contravenes injunctive group norms. In Studies 1 and 2, group-level self-definition served as a moderator in the relationship between the expression of discontent and perceived injunctive norm violation; in Study 3, group-level self-investment served as this moderator. The findings supported our predictions. This support was particularly strong when a majority of group members violated group norms. Implications for the analysis of the relationship between social identification and deviance are discussed.

Biliopancreatic duct injection of ethanol as an experimental model of acute and chronic pancreatitis in rats

PubMed Central

Unal, Ethem; Atalay, Suleyman; Tolan, Huseyin Kerem; Yuksekdag, Sema; Yucel, Metin; Acar, Aylin; Basak, Fatih; Gunes, Pembegul; Bas, Gurhan

2015-01-01

In the present study, we described an easily reproducable experimental pancreatits model induced by biliopancreatic duct injection of ethyl alcohol. Seventy Wistar albino rats were divided equally into seven groups randomly: the control group (group 1), acute pancreatitis groups; induced by 20% ethanol (group 2), 48% ethanol (group 3), 80% ethanol (group 4), chronic pancreatitis groups; induced by 20% ethanol (group 5), 48% ethanol (group 6) and by 80% ethanol (group 7). Acute pancreatitis groups were sacrified on postoperative day 3, while the control group and chronic pancreatitis groups were killed on postoperative day 7. Histopathologic evaluation was done, and P < 0.05 was accepted as statistically significant. All rats in group 3 developed acute pancreatitis (100%). Inflammatory infiltration of neutrophils and mononuclear cells, interstitial edema, and focal necrotic areas were seen in the pancreatic tissues. Similarly, all rats in group 6 developed chronic pancreatitis (100%). Interstitial fibrosis, lymphotic infiltration, ductal dilatation, acinar cell atrophy, periductal hyperplasia were seen in the pancreatic tissues. Mortality was seen only in group 7. The biliopancreatic ductal injection of 48% ethanol induced acute and chronic pancreatitis has 100% success rate. PMID:25785001

Neuroprotective effects of agmatine in experimental peripheral nerve injury in rats: a prospective randomized and placebo-controlled trial.

PubMed

Sezer, Aykut; Guclu, Bulent; Kazanci, Burak; Cakir, Murteza; Coban, Mustafa Kemal

2014-01-01

The purpose of this study was to demonstrate the activity of agmatine, an inducible nitric oxide synthase (iNOS) inhibitor and selective N-methyl-D-aspartate receptor (NMDAR) antagonist, on reducing tissue damage in distal part of traumatic nerve in an experimental rat peripheral nerve injury model. Sciatic nerves of 30 Sprague Dawley male rats were used. Rats were divided into 5 groups; group 1 (n=6), control group; group 2 (n=6), axonotmesis + placebo group; group 3 (n=6), axonotmesis + 50 mg/kg agmatine treatment group; group 4 (n=6), neurotmesis + placebo group; group 5 (n=6), neurotmesis + 50 mg/kg agmatine treatment group. Axonolysis, axon degeneration, edema, hemorrhage, and inflammation were evaluated in histopathologic examinations of all the groups. When group 2 was compared with group 3 in histopathologic sections, axonolysis was less in group 3 (p=0.007), as was axon degeneration (p=0.022) and edema (p=0.018). When group 4 was compared with group 5, axonolysis was less in group 5 (p=0.009), as was axon degeneration (p=0.006) and edema (p=0.021). This study demonstrated agmatine to have antioxidant and antineurotoxic effects in an experimental rat peripheral nerve injury model.

Src inhibitor reduces permeability without disturbing vascularization and prevents bone destruction in steroid-associated osteonecrotic lesions in rabbits.

PubMed

He, Yi-Xin; Liu, Jin; Guo, Baosheng; Wang, Yi-Xiang; Pan, Xiaohua; Li, Defang; Tang, Tao; Chen, Yang; Peng, Songlin; Bian, Zhaoxiang; Liang, Zicai; Zhang, Bao-Ting; Lu, Aiping; Zhang, Ge

2015-03-09

To examine the therapeutic effect of Src inhibitor on the VEGF mediating vascular hyperpermeability and bone destruction within steroid-associated osteonecrotic lesions in rabbits. Rabbits with high risk for progress to destructive repair in steroid-associated osteonecrosis were selected according to our published protocol. The selected rabbits were systemically administrated with either Anti-VEGF antibody (Anti-VEGF Group) or Src inhibitor (Src-Inhibition Group) or VEGF (VEGF-Supplement Group) or a combination of VEGF and Src inhibitor (Supplement &Inhibition Group) or control vehicle (Control Group) for 4 weeks. At 0, 2 and 4 weeks after administration, in vivo dynamic MRI, micro-CT based-angiography, histomorphometry and immunoblotting were employed to evaluate the vascular and skeletal events in different groups. The incidence of the destructive repair in the Anti-VEGF Group, Src-Inhibition Group and Supplement &Inhibition Group was all significantly lower than that in the Control Group. The angiogenesis was promoted in VEGF-Supplement Group, Src-Inhibition Group and Supplement &Inhibition Group, while the hyperpermeability was inhibited in Anti-VEGF Group, Src-Inhibition Group and Supplement &Inhibition Group. The trabecular structure was improved in Src-Inhibition Group and Supplement &Inhibition Group. Src inhibitor could reduce permeability without disturbing vascularization and prevent destructive repair in steroid-associated osteonecrosis.

Evaluation of the effects of fulvestrant and micronized progesterone on the post-operative adhesion formation and ovarian reserve in rat model with immunohistochemical and biochemical analysis.

PubMed

Oner, Gokalp; Ulug, Pasa; Demirci, Elif; Kumtepe, Yakup; Gündogdu, Cemal

2015-01-01

To evaluate the effects of fulvestrant and micronized progesterone on post-operative adhesion formation and ovarian reserve in a rat uterine horn adhesion. In this prospective randomized controlled trial, 32 female Wistar albino rats were randomly divided into four groups including control group (Group 1), the control adhesion group (Group 2), 1 mg/kg daily intramuscular fulvestrant received group (Group 3) and 1 mg/kg daily oral micronized progesterone received group (Group 4). The extent and severity of adhesions were scored and samples were taken from adhesion areas to investigate the grades of adhesions according to the immunohistochemical scoring system. Ovarian reserves were measured with anti-Müllerian hormone (AMH) and histological ovarian follicles count. The extent, severity and total adhesion scores were reduced in all treatment groups compared to control adhesion group (Group 2). Similarly, immunohistochemical adhesion scores were lower in the treatment groups. AMH and follicle count were significantly found lower in adhesion groups compared with control group. However, treatment groups were found to have higher ovarian reserve compared to control adhesion group (Group 2). Fulvestrant and micronized progesterone were found to reduce post-operative adhesion formations and have decreased detrimental effects of adhesion formation on ovarian reserve.

Student Use of Out-of-Class Study Groups in an Introductory Undergraduate Biology Course

PubMed Central

Rybczynski, Stephen M.; Schussler, Elisabeth E.

2011-01-01

Self-formed out-of-class study groups may benefit student learning; however, few researchers have quantified the relationship between study group use and achievement or described changes in study group usage patterns over a semester. We related study group use to performance on content exams, explored patterns of study group use, and qualitatively described student perceptions of study groups. A pre- and posttest were used to measure student content knowledge. Internet-based surveys were used to collect quantitative data on exam performance and qualitative data on study group usage trends and student perceptions of study groups. No relationship was found between gains in content knowledge and study group use. Students who participated in study groups did, however, believe they were beneficial. Four patterns of study group use were identified: students either always (14%) or never (55%) used study groups, tried but quit using them (22%), or utilized study groups only late in the semester (9%). Thematic analysis revealed preconceptions and in-class experiences influence student decisions to utilize study groups. We conclude that students require guidance in the successful use of study groups. Instructors can help students maximize study group success by making students aware of potential group composition problems, helping students choose group members who are compatible, and providing students materials on which to focus their study efforts. PMID:21364102

Effects of Urtica dioica on hepatic ischemia-reperfusion injury in rats.

PubMed

Kandis, Hayati; Karapolat, Sami; Yildirim, Umran; Saritas, Ayhan; Gezer, Suat; Memisogullari, Ramazan

2010-01-01

To evaluate the effects of Urtica dioica on hepatic ischemia-reperfusion injury. Thirty adult male Wistar albino rats were divided into three groups: sham group (group 1), control group (group 2), and Urtica dioica group (group 3). All the rats were exposed to hepatic ischemia for 60 min, followed by 60 min of reperfusion. In group 2, a total of 2 ml/kg 0.9% saline solution was given intraperitoneally. In group 3, a total of 2 ml/kg Urtica dioica was given intraperitoneally. At the end of the procedure, liver tissue and blood samples were taken from all rats. Serum aspartate aminotransferase, alanine aminotransferase, lactate dehydrogenase, ceruloplasmin, catalase, paraoxonase, arylesterase, and lipid hydroperoxide levels were measured. Liver tissue histopathologies were also evaluated by light microscopy. Serum aspartate aminotransferase, alanine aminotransferase and lactate dehydrogenase levels were significantly higher in group 2 than in group 1, and significantly lower in group 3 than in group 2. Also, group 2 had higher serum lipid hydroperoxides and ceruloplasmin levels but lower catalase, paraoxonase, and arylesterase levels than group 1. In group 3, serum lipid hydroperoxides and ceruloplasmin levels were significantly lower, and catalase, paraoxonase, and arylesterase levels were higher than those in group 2. Histopathological examination showed that liver tissue damage was significantly decreased in group 3 compared with group 2. Urtica dioica has a protective effect on the liver in hepatic ischemia-reperfusion-injured rats.

Effects of flurbiprofen axetil on postoperative serum IL-2 and IL-6 levels in patients with colorectal cancer.

PubMed

Jiang, W W; Wang, Q H; Peng, P; Liao, Y J; Duan, H X; Xu, M; Li, Y; Zhang, P B

2015-12-09

We explored the effects of flurbiprofen axetil on interleukin (IL)-2 and IL-6 levels in postoperative patients with colorectal cancer. A total of 120 patients (American Society of Anesthesiologists I and II) scheduled to undergo colorectal cancer surgery were randomly divided into 3 groups (N = 40 in each group): flurbiprofen axetil group (group F), morphine group (group M), and tramadol group (group T). Group M received 0.1 mg/kg morphine, group T received 1.5 mg/kg tramadol, and group F received 1.5 mg/kg flurbiprofen axetil. Patients in the 3 groups were administered treatments through intravenous injection 10 min before surgery. Serum IL-2 and IL-6 levels were detected. Postoperative adverse reactions were recorded, such as nausea, vomiting, and pruritus. The serum IL-6 level of the 3 groups increased 3 h after surgery. Compared with group M, IL-6 level was higher in group T and group F at 1 day after the surgery, and the differences between group M and the other groups were significant (P < 0.05). Moreover, the incidence of adverse reactions was significantly different among 3 groups (P < 0.05). Flurbiprofen axetil promoted the secretion of IL-2 and inhibited IL-6; additionally, flurbiprofen axetil may have a lower incidence of adverse reactions compared to other treatments.

Study about the effects of different fitness sports on cognitive function and emotion of the aged.

PubMed

Zhang, Xinan; Ni, Xiaomei; Chen, Peijie

2014-12-01

The aim of the study was to explore the effects of different fitness sports on cognitive function and emotion of the aged people. A total of 150 subjects aged between 60 and 70 were recruited from Shenyang Aged University and elderly activity center. All subjects reported no fitness before this study. The aged subjects were divided into five groups, included swimming group (A group), running group (B group), square dancing group (C group), Tai Chi group (D group) and control group (E group) with 30 people in each group. Subjects in each group received exercise intervention continued for 18 months. At baseline, 6, 12 and 18 months after intervention, the P300 test, SECF, HAMD and HAMA scale evaluations were performed. Compared to E group, the P2, N2 and P3 latency and response time in the D group after intervention for 6 months, and in the A-C groups after intervention for 12 months were significantly prolonged. The anxiety symptom and depression levels in the A-D groups after intervention for 12 months were significantly decreased when compared to E group (P < 0. 01), where significantly improved compared with the E group (P < 0. 01). The effect of exercise intervention for Tai Chi group was the most significant. Different fitness sports have marked beneficial effect on cognitive function and emotion of the aged people, especially the Tai Chi exercise.

Protective effects of boron and vitamin E on ethylene glycol-induced renal crystal calcium deposition in rat.

PubMed

Bahadoran, H; Naghii, M R; Mofid, M; Asadi, M H; Ahmadi, K; Sarveazad, A

2016-10-01

Kidney stone disease is a common form of renal disease. Antioxidants, such as vitamin E (Vit E) and boron, are substances that reduce the damage caused by oxidation. Adult male rats were divided into 5 groups (n=6). In group 1, rats received standard food and water for 28 days (control group); in group 2, standard rodent food and water with 0.75% ethylene glycol/d (dissolved in drinking water) (EG Group); in group 3, similar to group 2, with 3 mg of boron/d (dissolved in water) (EG+B Group); in group 4, similar to group 2, with 200 IU of vitamin E injected intraperitoneally on the first day and the 14th day, (EG+Vit E Group); in group 5, mix of groups 3 and 4, respectively (EG+B+Vit E Group). Kidney sections showed that crystals in the EG group increased significantly in comparison with the control group. Crystal calcium deposition score in groups of EG+B (160), EG+Vit E, and EG+B+Vit E showed a significant decrease compared to EG group. Measurement of the renal tubules area and renal tubular epithelial histological score showed the highest significant dilation in the EG group. Tubular dilation in the EG+B+Vit E group decreased compared to the EG+B and EG+Vit E groups. Efficient effect of boron and Vit E supplements, separately and in combination, has a complimentary effect in protection against the formation of kidney stones, probably by decreasing oxidative stress.

Evaluation of nutritional status and support in children with congenital heart disease.

PubMed

Blasquez, A; Clouzeau, H; Fayon, M; Mouton, J-B; Thambo, J-B; Enaud, R; Lamireau, T

2016-04-01

The objective of this disease was to determine the prevalence of malnutrition in children with congenital heart disease (CHD). A total of 125 children with CHD, under 6 months of age, were divided into four groups: no pulmonary hypertension (PH) or cyanosis (group 1, n=47), isolated cyanosis (group 2, n=52), isolated PH (group 3, n=16), and PH and cyanosis (group 4, n=10). Six children died at 6 months (n=4), 12 months (n=1) and 19 months (n=1). The remaining children were followed-up for 24 months. Prevalence of moderate to severe malnutrition (weight/weight for height <80%), caloric intake and medications were compared between the four groups. Moderate or severe malnutrition was more frequent in group 4 (100%) compared with others groups (group 1, 20%; group 2, 16.7% and group 3, 50%; P<0.05). Low oral caloric intake was more frequent in group 3 (71.4%) and group 4 (75%) than in group 1 (28%) and 2 (28.6%) (P<0.05). Food enrichment was practised in half of the children of group 4 and rarely in other groups (group 1, 15.8%; group 2, 8.6% and group 3, 11.1%; P<0.05). Enteral feeding was used more often in groups 3 (33.3%) and 4 (50%) than in groups 1 (15.8%) or 2 (14.3%; P<0.05). Moderate or severe malnutrition is present in 15% of children with CHD, and it is more frequent in case of PH. Half of these children demonstrate low caloric intake, whereas few have proper nutritional support.

Study on perfume stimulating olfaction with volatile oil of Acorus gramineus for treatment of the Alzheimer's disease rat.

PubMed

Liu, Zhi-Bin; Niu, Wen-Min; Yang, Xiao-Hang; Wang, Yuan; Wang, Wei-Gang

2010-12-01

To probe into the therapeutic effect of perfume stimulating olfaction with volatile oil of Acorus Gramineus on the Alzheimer's disease (AD) rat. Totally 50 adult SD rats, male,weighing 300 +/- 10 g, were randomly divided into 5 groups, normal group (group A), olfactory nerve severing model group (group B), AD model group (group C), AD model plus perfume stimulation group (group D), AD model olfactory nerve severing plus perfume stimulation group (group E), 10 rats in each group. After perfume stimulation, Morris maze test was conducted for valuating the learning and memory ability; Malondaldehyde (MDA) content, and superoxide dismutase (SOD) and glutathione peroxidase (GSH-Px) activities in the brain, and the brain weight were detected. Compared with the AD model group, the average escape latency and swimming distance in 6 days were significantly shorter than those in the group A, B, D (P < 0.01), with no significant differences between the group C and the group E (P > 0.05); Compared with the group A, B and D, MDA content in the group C significantly increased (P < 0.01), and SOD and GSH-Px activities significantly decreased (P < 0.01), and brain weight/body weight decreased significantly in the group C (P < 0.01), with no significant differences between the group C and the group E (P > 0.05). Perfume stimultating olfaction with volatile oil of Acorus Gramineus can significantly increase the learning-memory ability, decrease MDA content and increase SOD and GSH-Px activities and weight of brain in AD rats.

Ameliorating effects of tempol on methotrexate-induced liver injury in rats.

PubMed

Pınar, Neslihan; Kaplan, Mahir; Özgür, Tümay; Özcan, Oğuzhan

2018-06-01

Methotrexate (MTX) is used in the treatment of certain types of cancers and chronic inflammatory illnesses, although the clinical use of MTX is limited due to its adverse effects, the most common of which are hepatotoxicity and nephrotoxicity. In the present study, we demonstrate the protecting influence of tempol related to oxidative stress in MTX-induced liver toxicity in rats using histopathological and biochemical parameters. The rats were divided into four groups: control group (group 1), tempol group (group 2), MTX group (group 3) and MTX + tempol group (group 4). The control group (group 1) received physiological saline for 10 days; the tempol group (group 2) received 30 mg/kg i.p. for 10 days, the MTX group (group 3) received a single dose of 20 mg/kg intraperitoneal (i.p.) on the fourth day of the study, and the MTX + tempol group (group 4) received a single dose of 20 mg/kg i.p. on the fourth day, followed by tempol 30 mg/kg i.p. for 10 days. Malondialdehyde (MDA), myeloperoxidase (MPO), aspartate aminotransferase (AST) and alanine aminotransferase (ALT) levels were found to be significantly lower in the MTX + tempol group then in the MTX group; while superoxide dismutase (SOD), catalase (CAT) and glutathione peroxidase (GPx) levels were found to be higher in the MTX + tempol group than in the MTX group. Tempol ameliorates vacuolic degeneration, inflammation and necrosis in MTX-treated rats. Our study demonstrates that tempol treatment after MTX administration ameliorates oxidative damage in liver tissue in rats. Copyright © 2018. Published by Elsevier Masson SAS.

Milligan-Morgan hemorrhoidectomy with anal cushion suspension and partial internal sphincter resection for circumferential mixed hemorrhoids.

PubMed

Lu, Ming; Shi, Guang-Ying; Wang, Guo-Qiang; Wu, Yan; Liu, Yang; Wen, Hao

2013-08-14

To identify a more effective treatment protocol for circumferential mixed hemorrhoids. A total of 192 patients with circumferential mixed hemorrhoids were randomized into the treatment group, where they underwent Milligan-Morgan hemorrhoidectomy with anal cushion suspension and partial internal sphincter resection, or the control group, where traditional external dissection and internal ligation were performed. Postoperative recovery and complications were monitored. The time to wound healing was 12.96 ± 2.25 d in the treatment group shorter than 19.58 ± 2.71 d in the control group. Slight pain rate was 58.3% in the treatment group higher than 22.9% in the control group; moderate pain rate was 33.3% in the treatment group lower than 56.3% in the control group severe pain rate was 8.4% in the treatment group lower than 20.8% in the control group. No edema rate was 70.8% in the treatment group higher than 43.8% in the control group; mild local edema rate was 26% in the treatment group lower than 39.6% in the control group obvious local edema was 3.03% in the treatment group lower than 16.7% in the control group. No stenosis rate was 85.4% in the treatment group higher than 63.5% in the control group; moderate stenosis rate was 14.6% in the treatment group Lower than 27.1% in the control group severe anal stenosis rate was 0% in the treatment group lower than 9.4% in the control group. Milligan-Morgan hemorrhoidectomy with anal cushion suspension and partial internal sphincter resection is the optimal treatment for circumferential mixed hemorrhoids and can be widely applied in clinical settings.

Milligan-Morgan hemorrhoidectomy with anal cushion suspension and partial internal sphincter resection for circumferential mixed hemorrhoids

PubMed Central

Lu, Ming; Shi, Guang-Ying; Wang, Guo-Qiang; Wu, Yan; Liu, Yang; Wen, Hao

2013-01-01

AIM: To identify a more effective treatment protocol for circumferential mixed hemorrhoids. METHODS: A total of 192 patients with circumferential mixed hemorrhoids were randomized into the treatment group, where they underwent Milligan-Morgan hemorrhoidectomy with anal cushion suspension and partial internal sphincter resection, or the control group, where traditional external dissection and internal ligation were performed. Postoperative recovery and complications were monitored. RESULTS: The time to wound healing was 12.96 ± 2.25 d in the treatment group shorter than 19.58 ± 2.71 d in the control group. Slight pain rate was 58.3% in the treatment group higher than 22.9% in the control group; moderate pain rate was 33.3% in the treatment group lower than 56.3% in the control group severe pain rate was 8.4% in the treatment group lower than 20.8% in the control group. No edema rate was 70.8% in the treatment group higher than 43.8% in the control group; mild local edema rate was 26% in the treatment group lower than 39.6% in the control group obvious local edema was 3.03% in the treatment group lower than 16.7% in the control group. No stenosis rate was 85.4% in the treatment group higher than 63.5% in the control group; moderate stenosis rate was 14.6% in the treatment group Lower than 27.1% in the control group severe anal stenosis rate was 0% in the treatment group lower than 9.4% in the control group. CONCLUSION: Milligan-Morgan hemorrhoidectomy with anal cushion suspension and partial internal sphincter resection is the optimal treatment for circumferential mixed hemorrhoids and can be widely applied in clinical settings. PMID:23946609

Evaluation of nanoselenium (Nano-Se) effect on hematological and serum biochemical parameters of rat in experimentally lead poisoning.

PubMed

Dehkordi, A Jafari; Mohebbi, A N; Aslani, M R; Ghoreyshi, S M

2017-04-01

The present study was designed to evaluate the effect of nanoselenium (Nano-Se) on hematological and biochemical parameters of rats experimentally intoxicated with lead (Pb). Thirty male rats were randomly divided into six groups as follows: the control, selenite, Nano-Se, Pb group, Pb + selenite, and Pb + Nano-Se groups. After 35 days, blood was collected from rats and hematology and serum biochemical parameters of oxidative stress were measured. The thiobarbituric acid reactive substances (TBARS) level of Pb group was significantly higher than other groups. Also, TBARS level was significantly lower in the Pb + Nano-Se group than Pb + selenite group. The serum superoxide dismutase activities were significantly lower in Pb group than the control, Pb + selenite, and Pb + Nano-Se groups. The catalase activities in the Pb group showed no significant change when compared to other groups. In the Pb group, packed cell volume was lower than the control group. A significant difference was observed between the control group and the Pb, Pb + selenite, and Pb + Nano-Se groups. In the Pb group, the numbers of white blood cell (WBC) decreased in comparison with the control group. Also, there was significant increase in WBC counts in the Pb + Nano-Se and Pb + selenite groups in comparison with Pb group. The number of lymphocytes in the Pb group decreased in comparison with the control group. By comparing the means of the Pb + Nano-Se and Pb + selenite groups together, it was determined that there were significant differences in the lymphocytes and neutrophil counts. In conclusion, usage of selenium compounds particularly Nano-Se particles inhibits the adverse effects of Pb on antioxidant activity and immune system function in the Pb poisoning.

In-group defense, out-group aggression, and coordination failures in intergroup conflict

PubMed Central

De Dreu, Carsten K. W.; Méder, Zsombor; Giffin, Michael; Prochazkova, Eliska; Krikeb, Jonathan

2016-01-01

Intergroup conflict persists when and because individuals make costly contributions to their group’s fighting capacity, but how groups organize contributions into effective collective action remains poorly understood. Here we distinguish between contributions aimed at subordinating out-groups (out-group aggression) from those aimed at defending the in-group against possible out-group aggression (in-group defense). We conducted two experiments in which three-person aggressor groups confronted three-person defender groups in a multiround contest game (n = 276; 92 aggressor–defender contests). Individuals received an endowment from which they could contribute to their group’s fighting capacity. Contributions were always wasted, but when the aggressor group’s fighting capacity exceeded that of the defender group, the aggressor group acquired the defender group’s remaining resources (otherwise, individuals on both sides were left with the remainders of their endowment). In-group defense appeared stronger and better coordinated than out-group aggression, and defender groups survived roughly 70% of the attacks. This low success rate for aggressor groups mirrored that of group-hunting predators such as wolves and chimpanzees (n = 1,382 cases), hostile takeovers in industry (n = 1,637 cases), and interstate conflicts (n = 2,586). Furthermore, whereas peer punishment increased out-group aggression more than in-group defense without affecting success rates (Exp. 1), sequential (vs. simultaneous) decision-making increased coordination of collective action for out-group aggression, doubling the aggressor’s success rate (Exp. 2). The relatively high success rate of in-group defense suggests evolutionary and cultural pressures may have favored capacities for cooperation and coordination when the group goal is to defend, rather than to expand, dominate, and exploit. PMID:27601640

[Expression of OPG/RANK/RANKL in the rat dental pulp tissue of periodontitis combined with vascular calcification and its clinical significance].

PubMed

Pan, Ke-Qing; Zhang, Peng-Mei; Deng, Jing; Lou, Xiu-Xiu; Meng, Yun; Liu, Gui-Rong

2016-08-01

To study the expression and possible role of OPG/RANK/RANKLin the rat dental pulp of periodontitis combined with vascular calcification. Thirty-six male Wister rats were randomly divided into 4 groups: control group(group C), periodontitis group(group CP), vascular calcification group(group VDN) and compound group(group CP+VDN). Each group underwent corresponding management to establish animal model. When the model was successful, the maxillae including molars were sectioned, pulp tissue was examined by H-E staining; Immunohistochemical staining method was used to evaluate the expression and ratio of OPG and RANKL in pulp tissues. Statistical analysis was carried out using SPSS 19.0 software package. The pulp tissue of group CP, VDN, CP+VDN showed varied degrees of damage, neutrophil infiltration, pulp vascular congestion, odontoblasts vacuolar changes, pulp necrosis by H-E staining, and the changes in CP+VDN group was the most significant, followed by CP group, VDN group. Immunohistochemistry showed OPG in pulp tissues in group CP, VDN, CP+VDN were significantly lower than that in normal group (P<0.05), and the expression in group CP+VDN was the least;Expression of RANKL in pulp tissues in group CP, VDN, CP+VDN were significantly higher than that in normal group(P<0.05)，and the expression in group CP+VDN was the highest. The ratio of OPG/RANKL in normal group was the highest, and the ratio in CP+VDN group was the lowest. Periodontitis and vascular calcification can damage the pulp tissue, periodontitis compound with vascular calcification may aggravate the injury; OPG/RANKL/RANK system may play an important role in pulp tissue injury.

Three-month treatment with triptorelin, letrozole and ulipristal acetate before hysteroscopic resection of uterine myomas: prospective comparative pilot study.

PubMed

Bizzarri, Nicolò; Ghirardi, Valentina; Remorgida, Valentino; Venturini, Pier Luigi; Ferrero, Simone

2015-09-01

To compare the usefulness of preoperative treatment with triptorelin, letrozole or ulipristal acetate or no treatment before hysteroscopic removal of uterine submucosal myomas. Single center prospective non-randomized comparative pilot study. The study included consecutive premenopausal patients undergoing hysteroscopic resection of myomas graded as type 0, type 1 or type 2 according to the FIGO classification with diameter between 20 and 35 mm. Exclusion criteria were: associated polyps, associated non-hysteroscopic surgical procedures, >2 myomas requiring hysteroscopic resection. This study enrolled patients who underwent either direct surgery (group S; n=23) or 3-month preoperative treatment with triptorelin (3.75 mg every 28 days; group T; n=20), letrozole (2.5 mg/day; group L; n=11) or ulipristal acetate (5 mg/day; group U; n=7). Patients underwent hysteroscopic resection of the myomas. All medical treatments caused a significant decrease in the volume of myomas (group T, p<.001; group L, p<.001; group U, p=.006); however, the percentage decrease in myoma volume was lower in group U than in group T (p=.001) and in group L (p=.010). The hysteroscopy time was higher in group S than in group T (p<.001) and in group L (p=.001); there was no significant difference in the hysteroscopy time between group S and group U (p=.206). Fluid absorption was lower in group T than in group S (p=.002) and in group L than in group S (p=.048); fluid absorption was similar in group S and group U (p=.110). Intra- and postoperative complications, postoperative pain, and patient satisfaction were similar in the four study groups. Surgeon's evaluation of operative difficulty was better in group T than in group S (p<.005). Preoperative treatment with triptorelin and letrozole decreases the hysteroscopy time and the volume of fluid absorbed during hysteroscopic resection of uterine submucosal myomas. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

The Study of Different Approaches of Parecoxib Sodium Pretreatment on the Behavior of Rats with Neuropathic Pain.

PubMed

Cui, Wenyao; Yu, Xue; Zhang, Huiqian

2015-05-01

Our objective is to analyze and observe the different administration routes of parecoxib sodium pretreatment on the behavioral improvement of rats with neuropathic pain to provide the preclinical data of parecoxib sodium on neuropathic pain treatment. 30 SD rats were randomly divided into five groups, including model group, sham operation group, intrathecal injection group (IT group), intraperitoneal injection group (IP group), and perineural infiltration group (PI group). The rats in model group and three parecoxib sodium pretreatment groups received spinal nerve ligation (SNL). Heat pain test and 50 % paw mechanical withdrawal threshold test (50 % PMWT) were use to assess the responses after parecoxib sodium pretreatment. 50 % PMWT results of right foot in five groups had no statistical difference (P > 0.05); 50 % PMWT results of left and right feet in three parecoxib sodium pretreatment groups were obviously higher than SNL group at different time points, which was statistically different (P < 0.05); in comparison with three pretreatment groups, the data of left foot in IT group were obviously higher than PI group and IP group, and the comparison among three groups had significant difference (P < 0.05). However, the data of right foot had no significant difference among three groups (P > 0.05). Paw thermal withdrawal latency (PTWL) results of left and right feet in five groups had no significant difference before surgery (P > 0.05); after the establishment of neuropathic model, PTWL results in five groups were significantly decreased; however, PTWL results of left and right feet at 3 days after surgery in IT group were significantly higher than the two other pretreatment groups (P < 0.05); PTWL results of left and right feet at 7 and 14 days after surgery had no significant difference. Parecoxib sodium pretreatment can effectively improve the behaviors caused by neuropathic pain, and intrathecal injection is the most effective route of administration.

[Effects of electroacupuncture at "Jiaji" (EX-B 2) on myocardial apoptosis and the expression of Bcl-2 and Bax in rats with ischemia-reperfusion injury].

PubMed

Kong, Su-Ping; Zhang, Xin; Tan, Qi-Wen

2013-06-01

To explore the protective mechanism of acupuncture on myocardial ischemia-reperfusion injury. Fifty Wistar rats were randomly divided into a sham-operation group, a model group, a Jiaji group , a Neiguan group and a Yanglingquan group, 10 rats in each group. The model of myocardial ischemia-reperfusion injury was duplicated by ligating the left anterior descending coronary artery (LADCA) in the later four groups, and the LADCA was not ligated in the sham-operation group. The rats in the treatment groups were treated with electroacupuncture at "Jiaji" (EX-B 2), "Neiguan" (PC 6) and "Yanglingquan" (GB 34) on both sides, respectively, once a day for 7 days. No interventions were produced in the sham-operation group and model group. Myocardial apoptosis were examined by the TUNEL method. The expressions of Bcl-2 and Bax proteins were measured by immunohistochemical method. Apoptosis index(AI) was significantly lower in the Jiaji group, Neiguan group and sham-operation group compared with model group (P < 0.01). Compared with the sham-operation group, AI were significantly increased in other groups (all P < 0.01). There was no significant difference in AI between Jiaji and Neiguan group (P > 0.05). Compared with the model group, the expression of Bcl-2 was significantly increased and Bax protein was significantly decreased in Jiaji group and Neiguan group (both P < 0.01). The expressions of Bcl-2 and Bax proteins were significantly increased in other groups compared with the sham-operation group (all P < 0.01). There was no significant difference in the expression of Bcl-2 and Bax proteins between Jiaji and Neiguan group (P > 0.05). Electroacupuncture at both Jiaji (EX-B 2) and Neiguan (PC 6) has protective effects on myocardial ischemia-reperfusion injury, and the mechanism is closely related to inhibiting myocardial apoptosis by adjusting the expression of Bcl-2 and Bax.

Non-invasive treatment to grade 1 essential hypertension by percutaneous laser and electric pulse to acupoint with music: A randomized controlled trial.

PubMed

Zhan, Hong-Rui; Hong, Zhong-Si; Chen, Yi-Shen; Hong, Hai-Yu; Weng, Ze-Bin; Yang, Zhang-Bin; Shi, Jing-Li; Chen, Zhong-Ben

2016-09-01

To study a non-drug therapy for hypertension disease by combining percutaneous laser and electric pulse stimulation to acupoint with music, and to test the efficiency of the combining treatment to grade 1 essential hypertension. A total of 174 patients with grade 1 essential hypertension were randomly assigned to 3 groups with a random number table after Chinese medicine (CM) syndrome differentiation: the photoelectric and musical treatment group (Group 1, with a self-developed multi-mode audio frequency pulse photoelectric therapeutic apparatus), acupuncture group (Group 2), and oral placebo group (Group 3), 58 cases per group. The curative effect of each group was evaluated by the changes of blood pressure and CM syndrome integral before and after treatment. Compared with Group 3, there were significant decrease of blood pressure and CM syndrome integral in Group 1 and Group 2 (P<0.01). Compared with Group 2, Group 1 showed the highest decrease in systolic pressure (P<0.017). The total effective rate of anti-hypertension in Group 1 (91.38%, 53/58) was significantly higher than that in Group 2 (74.13%, 43/58) and Group 3 (18.97%, 11/58, P<0.05 or P<0.01); and that in Group 2 was also significantly higher than that in Group 3 (P<0.01). There were significant difference in the total effective rate of CM syndrome integral in both Group 1 (93.10%, 54/58) and Group 2 (84.48%, 49/58) as compared with Group 3 (17.24%, 10/58, P<0.01), while there was no significant difference between Group 1 and Group 2 (P>0.05). The multi-mode audio frequency pulse photoelectric therapeutic apparatus, combining music, laser and electric pulse stimulation, is clinically useful for grade 1 essential hypertension. This "three in one" therapy method is non-invasive, easy and simple to handle. It is expected to be popularized as a new alternative treatment.

Mini-intervention for subacute low back pain: a randomized controlled trial.

PubMed

Karjalainen, Kaija; Malmivaara, Antti; Pohjolainen, Timo; Hurri, Heikki; Mutanen, Pertti; Rissanen, Pekka; Pahkajärvi, Helena; Levon, Heikki; Karpoff, Hanna; Roine, Risto

2003-03-15

Randomized controlled trial. To investigate the effectiveness and costs of a mini-intervention, provided in addition to the usual care, and the incremental effect of a work site visit for patients with subacute disabling low back pain. There is lack of data on cost-effectiveness of brief interventions for patients with prolonged low back pain. A total of 164 patients with subacute low back pain were randomized to a mini-intervention group (A), a work site visit group (B), or a usual care group (C). Groups A (n = 56) and B (n = 51) underwent one assessment by a physician plus a physiotherapist. Group B received a work site visit in addition. Group C served as controls (n = 57) and was treated in municipal primary health care. All patients received a leaflet on back pain. Pain, disability, specific and generic health-related quality of life, satisfaction with care, days on sick leave, and use and costs of health care consumption were measured at 3-, 6-, and 12-month follow-ups. During follow-up, fewer subjects had daily pain in Groups A and B than in Group C (Group A Group C, = 0.002; Group B Group C, = 0.030). In Group A, pain was less bothersome (Group A Group C, = 0.032) and interfered less with daily life (Group A Group C, = 0.040) than among controls. Average days on sick leave were 19 in Group A, 28 in Group B, and 41 in Group C (Group A Group C, = 0.019). Treatment satisfaction was better in the intervention groups than among the controls, and costs were lowest in the mini-intervention group. Mini-intervention reduced daily back pain symptoms and sickness absence, improved adaptation to pain and patient satisfaction among patients with subacute low back pain, without increasing health care costs. A work site visit did not increase effectiveness.

The impact of gout on patient's lives: a study of African-American and Caucasian men and women with gout.

PubMed

Singh, Jasvinder A

2014-06-24

The aim of this study was to examine the impact of gout on quality of life (QOL) and study differences by gender and race. Ten race- and sex-stratified nominal groups were conducted, oversampling for African-Americans and women with gout. Patients presented, discussed, combined and rank-ordered their concerns. A total of 62 patients with mean age 65.1 years, 60% men, 64% African-American, participated in 10 nominal groups: African-American men (n = 23; 3 groups); African-American women (n = 18; 3 groups); Caucasian men (n = 15; 3 groups); and Caucasian women (n = 6; 1 group). The most frequently cited high-ranked concerns among the ten nominal groups were: (1) effect of gout flare on daily activities (n = 10 groups); (2) work disability (n = 8 groups); (3) severe pain (n = 8 groups); (4) joint swelling and tenderness (n = 6 groups); (5) food restrictions (n = 6 groups); (6) medication related issues (n = 6 groups); (7) dependency on family and others (n = 5 groups); (8) emotional Impact (n = 5 groups); (9) interference with sexual function (n = 4 groups); (10) difficulty with shoes (n = 4 groups); and (11) sleep disruption (n = 4 groups). Compared with men, women ranked the following concerns high more often: problems with shoes (n = 4 versus n = 0 groups); dependency (n = 3 versus n = 2 groups); and joint/limb deformity (n = 2 versus n = 0 group). Compared with Caucasians, African-Americans ranked the following concerns high more often: dietary restrictions (n = 6 versus n = 0 groups); severe pain (n = 6 versus n = 2 groups); gout bringing the day to a "halt" (n = 2 versus n = 0 group); effect on emotional health (n = 4 versus n = 1 groups); and the need for canes/crutches during flares (n = 2 versus n = 0 group). Gout has a significant impact on a patient's QOL. Important differences in the impact of gout by gender and race were noted.

Cancer treatment adherence among low-income women with breast or gynecologic cancer: a randomized controlled trial of patient navigation.

PubMed

Ell, Kathleen; Vourlekis, Betsy; Xie, Bin; Nedjat-Haiem, Frances R; Lee, Pey-Jiuan; Muderspach, Laila; Russell, Christy; Palinkas, Lawrence A

2009-10-01

The authors implemented a controlled, randomized trial that compared 2 interventions: the provision of written resource navigation information (enhanced usual care [EUC]) versus written information plus patient navigation (TPN) aimed at improving adjuvant treatment adherence and follow-up among 487 low-income, predominantly Hispanic women with breast cancer or gynecologic cancer. Women were randomized to receive either TPN or EUC; and chemotherapy, radiation therapy, hormone therapy, and follow-up were assessed over 12 months. Patients with breast cancer were analyzed separately from patients with gynecologic cancer. Overall adherence rates ranged from 87% to 94%, and there were no significant differences between the TPN group and the EUC group. Among women with breast cancer, 90% of the EUC group and 88% of the TPN group completed chemotherapy (14% of the EUC group and 26% of the TPN group delayed the completion of chemotherapy), 2% of the EUC group and 4% of the TPN group failed to complete chemotherapy, and 8% of the EUC group and 7% of the TPN group refused chemotherapy. Radiation treatment adherence was similar between the groups: Ninety percent of patients completed radiation (40% of the EUC group and 42% of the TPN group delayed the completion of radiation); in both groups, 2% failed to complete radiation, and 8% refused radiation. Among gynecologic patients, 87% of the EUC group and 94% of the TPN group completed chemotherapy (41% of the EUC group and 31% of the TPN group completed it with delays), 7% of the EUC group and 6% of the TPN group failed to complete chemotherapy, 6% of the EUC refused chemotherapy, 87% of the EUC group and 84% of the TPN group completed radiation (51% of the EUC group and 42% of the TPN with delays), 5% of the EUC group and 8% of the TPN group failed to complete radiation, and 8% of the EUC group and 5% of the TPN group refused radiation. Treatment adherence across randomized groups was notably higher than reported in previous studies, suggesting that active telephone patient navigation or written resource informational materials may facilitate adherence among low-income, predominantly Hispanic women. Adherence also may have be facilitated by federal-state breast and cervical cancer treatment funding. 2009 American Cancer Society.

[MAPK signaling pathways involved in aluminum-induced apoptosis and necroptosis in SH-SY5Y cells].

PubMed

Jia, Xiaofang; Zhang, Qinli; Niu, Qiao

2014-11-01

To explore the role of MAPK signaling pathway in apoptosis and necroptosis induced by aluminum in SH-SY5Y cells. To imitate neural cell death induced by aluminium, AlCl3 x 6H2O (4 mmol/L) was used to treat SH-SY5Y cells. Necrostatin-1 (Nec-1,60 μmol/L), the specific inhibitor for necroptosis, and zVAD-fmk (20 μmol/L), the specific inhibitor for apoptosis, were added into cultures for inhibiting the occurrence of necroptosis and apoptosis. CCK-8 was performed to measure cell viability, flow cytometry was used to test the difference of apoptosis rate and necrosis rate between groups, and western-blot was used to detect the change of MAPK protein. Compared with blank control group, solvent control group, Nec-1 control group and zVAD-fmk control group, cell viabiligy of Al(3+) exposed group, Al(3+) plus Nec-1 group and Al(3+) plus zVAD-fmk group decreaced (P < 0.05). Compared with Al(3+) exposed group, cell viability of Al(3+) plus Nec-1 group and Al(3+) plus zVAD-fmk group increased (P < 0.05). Necrotic rate and apoptotic rate in Al(3+) exposed group, Al(3+) plus Nec-1 group and Al(3+) plus zVAD-fmk group obviously increased compared with blank control group, solvent control group, Nec-1 control group and zVAD-fmk control group (P < 0.05). Compared with Al(3+) exposed group, necrotic and apaptotic rate of Al(3+) plus zVAD-fmk group and Al(3+) plus Nec-1 group were statistically significant decreased (P < 0.05). Compared with blank control group, solvent control group, Nec-1 control group and zVAD-fmk control group, expression of p-p38 in Al(3+) exposed group, Al(3+) plus Nec-1 group and Al(3+) plus zVAD-fmk group increased obviously (P < 0.05), and expression of p-ERK decreased significantly (P < 0.05). Compared with Al(3+) exposed group, expression of p-p38 decreased (P < 0.05), but p-ERK increased in Al(3+) plus Nec-1 group (P < 0.05). The ERK and p38 MAPK signaling pathways are involved in aluminum-induced necroptosis in SH-SY5Y cells, but only ERK signaling pathway is involved in aluminum-induced apoptosis, and JNK signaling pathway is not involved in aluminum-induced cell death.

24 CFR 982.612 - Group home: State approval of group home.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 24 Housing and Urban Development 4 2012-04-01 2012-04-01 false Group home: State approval of group home. 982.612 Section 982.612 Housing and Urban Development REGULATIONS RELATING TO HOUSING AND URBAN... Types Group Home § 982.612 Group home: State approval of group home. A group home must be licensed...

24 CFR 982.612 - Group home: State approval of group home.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 24 Housing and Urban Development 4 2011-04-01 2011-04-01 false Group home: State approval of group home. 982.612 Section 982.612 Housing and Urban Development REGULATIONS RELATING TO HOUSING AND URBAN... Types Group Home § 982.612 Group home: State approval of group home. A group home must be licensed...

24 CFR 982.612 - Group home: State approval of group home.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 24 Housing and Urban Development 4 2010-04-01 2010-04-01 false Group home: State approval of group home. 982.612 Section 982.612 Housing and Urban Development Regulations Relating to Housing and Urban... Types Group Home § 982.612 Group home: State approval of group home. A group home must be licensed...

24 CFR 982.612 - Group home: State approval of group home.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 24 Housing and Urban Development 4 2014-04-01 2014-04-01 false Group home: State approval of group home. 982.612 Section 982.612 Housing and Urban Development REGULATIONS RELATING TO HOUSING AND URBAN... Types Group Home § 982.612 Group home: State approval of group home. A group home must be licensed...

24 CFR 982.612 - Group home: State approval of group home.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 24 Housing and Urban Development 4 2013-04-01 2013-04-01 false Group home: State approval of group home. 982.612 Section 982.612 Housing and Urban Development REGULATIONS RELATING TO HOUSING AND URBAN... Types Group Home § 982.612 Group home: State approval of group home. A group home must be licensed...

Weak-link capacitor

DOEpatents

Dirk, Shawn M [Albuquerque, NM; Johnson, Ross S [Albuquerque, NM; Wheeler, David R [Albuquerque, NM; Bogart, Gregory R [Corrales, NM

2011-06-07

A process for making a dielectric material where a precursor polymer selected from poly(phenylene vinylene) polyacetylene, poly(p-phenylene), poly(thienylene vinylene), poly(1,4-naphthylene vinylene), and poly(p-pyridine vinylene) is energized said by exposure by radiation or increase in temperature to a level sufficient to eliminate said leaving groups contained within the precursor polymer, thereby transforming the dielectric material into a conductive polymer. The leaving group in the precursor polymer can be a chloride, a bromide, an iodide, a fluoride, an ester, an xanthate, a nitrile, an amine, a nitro group, a carbonate, a dithiocarbamate, a sulfonium group, an oxonium group, an iodonium group, a pyridinium group, an ammonium group, a borate group, a borane group, a sulphinyl group, or a sulfonyl group.

Weak-link capacitor

DOEpatents

Dirk, Shawn M.; Johnson, Ross S.; Wheeler, David R.; Bogart, Gregory R.

2013-04-23

A process for making a dielectric material where a precursor polymer selected from poly(phenylene vinylene)polyacetylene, poly(p-phenylene), poly(thienylene vinylene), poly(1,4-naphthylene vinylene), and poly(p-pyridine vinylene) is energized said by exposure by radiation or increase in temperature to a level sufficient to eliminate said leaving groups contained within the precursor polymer, thereby transforming the dielectric material into a conductive polymer. The leaving group in the precursor polymer can be a chloride, a bromide, an iodide, a fluoride, an ester, an xanthate, a nitrile, an amine, a nitro group, a carbonate, a dithiocarbamate, a sulfonium group, an oxonium group, an iodonium group, a pyridinium group, an ammonium group, a borate group, a borane group, a sulphinyl group, or a sulfonyl group.

Psychological need-satisfaction and subjective well-being within social groups.

PubMed

Sheldon, Kennon M; Bettencourt, B Ann

2002-03-01

Five candidate measures of psychological need-satisfaction were evaluated as predictors of high positive and low negative mood within the group, intrinsic motivation for group activities, and high commitment to the group. Consistent with self-determination theory (Deci & Ryan, 1991), personal autonomy and interpersonal relatedness both predicted positive outcomes. Consistent with optimal distinctiveness theory (Brewer, 1991), feeling included within the group, feeling personally distinctive within the group, and feeling that the group is distinctive compared to other groups, also predicted positive outcomes. Simultaneous regression analyses indicated that the five needs were differentially related to the different well-being indicators, and also suggested that group inclusion may be the most important need to satisfy within group contexts. Supplementary analyses showed that members of formal groups felt less personal autonomy, but more group distinctiveness, compared to informal group members.

[Effects of electroacupuncture at "Weizhong" (BL 40) on regeneration and morphology in rats with bupivacaine-induced multifidus muscle injury].

PubMed

Peng, Yuanyuan; Liu, Tong; Chen, Yupei; Zou, Dehui; Zhang, Li

2016-03-01

To observe the intervention effect of electroacupuncture (EA) at "Weizhong" (BL 40) on rats with bupivacaine-induced multifidus muscle injury, so as to explore the action mechanism. A total of 72 rats were randomly divided into a control group, a model group, a Weizhong group and a Shenshu group, 18 rats in each group. Each group was again randomly divided into a 4-day subgroup, a 7-day subgroup and a 14-day subgroup, 6 rats in each subgroup. Rats in the model group, Weizhong group and Shenshu group were treated with intramuscular injection of 0.5% bupivacaine (BPVC) to establish the model of multifidus muscle injury. Rats in the Weizhong group and Shenshu group were treated with EA at "Weizhong" (BL 40) and "Shenshu" (BL 23), 20 min per treatment, once a day. Each subgroup was treated for 4 days, 7 days and 14 days respectively. Rats in the control group and model group were treated with immobilization. The morphology and cross sectional area (CSA) changes of multifidus with HE and Masson staining at different time points were observed; the expression of insulin like growth factor 1 (IGF-1) and myogenic differentiation antigen (MyoD) was measured by immunohistochemical method. After the modeling, there were significant morphology changes of multifidus at different time points, which was not fully recovered after 14 days. The morphological observation in the Weizhong group and Shenshu group was superior to that in the model group. At 7th day, the CSA in the Weizhong group was higher than that in the model group (P < 0.05); at 14th day, the CSA in the Weizhong group and Shenshu group was higher than that in the model group (P < 0.01, P < 0.05). At 4th day and 7th day, the expression of IGF-1 in the model group was higher than that in the control group (both P < 0.01); at 4th day, that in the Weizhong group was higher than that in the model group (P < 0.01), and that in the Weizhong group was higher than that in the Shenshu group (P < 0.05), and that in the Shenshu group was as higher than that in the model group (P < 0.05); at 14th day, that in the Shenshu group was higher than that in the model and Weizhong group (P < 0.01). At 4th day, the expression of MyoD in the Weizhong group and Shenshu group was higher than that in the model group (P < 0.01), which was more significant in the Weizhong group (P < 0.01). Electroacupuncture at "Weizhong" (BL 40) and "Shenshu" (BL 23) can both promote the regeneration of multifidus muscle injury. EA at "Weizhong" (BL 40) has a better effect at early phase, which may be related to the up-regulation of IGF-1 and MyoD and the completion of the proliferation of myoblast in advance.

[The protective effect of bone marrow mesenchymal stem cells carrying antioxidant gene superoxide dismutase on paraquat lung injury in mice].

PubMed

Liu, Hong; Ding, Yingwei; Hou, Yuehui; Zhao, Guangju; Lu, Yang; Chen, Xiao; Cai, Qiqi; Hong, Guangliang; Qiu, Qiaomeng; Lu, Zhongqiu

2016-01-01

To explore the possible mechanism and protective effect of BMSCs (bone mesenchymal stem cells) carrying superoxide dismutase (SOD) gene on mice with paraquat-induced acute lung injury. To establish the cell line of BMSCs bringing SOD gene, lentiviral vector bringing SOD gene was built and co-cultured with BMSCs. A total of 100 BALB/c mice were randomly divided into five groups, namely Control group, poisoning group (PQ group) , BMSCs therapy group (BMSC group) , BMSCs-Cherry therapy group (BMSC-Cherry group) , BMSCs-SOD therapy group (BMSC-SOD group) . PQ poisoning model was produced by stomach lavaged once with 1 ml of 25 mg/kg PQ solution, and the equal volume of normal saline (NS) was given to Control group mice instead of PQ. The corresponding BMSCs therapy cell lines were delivered to mice through the tail vein of mice 4h after PQ treatment.Five mice of each group were sacrificed 3 d, 7 d, 14 d and 21 days after corresponding BMSCs therapy cell lines administration, and lung tissues of mice were taken to make sections for histological analysis. The serum levels of glutathione (GSH) , malondialdehyde (MDA) , SOD, and the levels of transforming growth factor-β (TGF-β) and tumor necrosis factor-α (TNF-α) in lung tissue were determined. The level of SOD was assayed by Westen-blot. Compared with Control group, the early (3 days) levels of SOD protein in lung tissue of PQ group obviously decreased, and the late (21 days) levels of SOD obviously increased, while in therapy groups, that was higher than that in PQ group, and the BMSCs-SOD group showed most obvious (all P<0.05) . Compared with Control group, the levels of plasma GSH and SOD of PQ group and each therapy group wae significantly lower than those in Control group, while in therapy groups, those were higher than those of PQ group, and the BMSCs-SOD group showed most obvious (all P<0.05) .Compared with Control group, the level of plasma MDA, TNF-α and TGF-β in PQ group and therapy groups were significantly higher, while in therapy groups, that was lower than that in PQ group, and the BMSCs-SOD group showed most obvious (all P<0.05) . Lung biopsy showed that, the degree of lung tissue damage in each therapy group obviously reduced. SOD is the key factor of the removal of reactive oxygen species (ROS) in cells, that can obviously inhibit the oxidative stress damage and the apoptosis induced by PQ, thus significantly increasing alveolar epithelial cell ability to fight outside harmful environment.

Immunotherapy with dendritic cells and cytokine-induced killer cells for MDA-MB-231 breast cancer stem cells in nude mice

PubMed Central

Chen, Qiang; Cui, Xiao-Xu; Liang, Pei-Fen; Dou, Jin-Xia; Liu, Zi-Yan; Sun, Wen-Wen

2016-01-01

Objective: To compare the effects and safety of immunotherapy using different methods to load DC-CIK cells for MDA-MB-231 breast cancer stem cells. Methods: A breast cancer model was established in BALB/c nude mice using breast cancer stem cells. All mice were randomly divided into six groups, and each group had three nude mice: the blank control group, the DC-CIK group (group D), the MDA-MB-231 CSC whole-cell lysate DC-CIK group (group L-D), the MDA-MB-231 CSC RNA DC-CIK group (group R-D), the THP DC-CIK group (group T-D) and group THP. Nude mice in groups D, L-D, R-D and T-D were injected with CSCs; 4 days later, the mice were inoculated with 1 × 106 DC-CIK cells via the tail vein. This injection was repeated 2 times a week for three weeks. The mice in groups THP and T-D were injected with a 5 mg/Kg dose of THP chemotherapeutic agents via the tail vein the day before DC-CIK injection, which was repeated one time a week for three weeks. Nude mice in the blank control group were injected with normal saline. The weights and sizes of the tumors were measured after the mice were euthanized. The expression of c-Myc, a key proto-oncogene associated with the Akt signaling pathway, was detected with RT-PCR. Results: The tumor growth rates in each group were as follows: group L-D < group R-D < group D < group T-D < blank control group < group THP. The nude mice in groups L-D, R-D and D were normal, active and had a healthy appetite. The mice in groups T-D and THP were lethargic, less active and showed loss of appetite, and their caudal vein was easy to stimulate. The mice in the blank control group were sacrificed during the third week or when their tumors developed ulceration. Compared with the blank control group, c-Myc gene expression was reduced in the tumors of the five experimental groups. Conclusion: The results showed that DC-CIK cells stimulated by different methods were highly effect against MDA-MB-231 breast cancer stem cells in nude mice in all groups, especially in group L-D. DC-CIK immunotherapy may provide a new strategy for the clinical treatment of breast cancer. PMID:27508015

Immunotherapy with dendritic cells and cytokine-induced killer cells for MDA-MB-231 breast cancer stem cells in nude mice.

PubMed

Chen, Qiang; Cui, Xiao-Xu; Liang, Pei-Fen; Dou, Jin-Xia; Liu, Zi-Yan; Sun, Wen-Wen

2016-01-01

To compare the effects and safety of immunotherapy using different methods to load DC-CIK cells for MDA-MB-231 breast cancer stem cells. A breast cancer model was established in BALB/c nude mice using breast cancer stem cells. All mice were randomly divided into six groups, and each group had three nude mice: the blank control group, the DC-CIK group (group D), the MDA-MB-231 CSC whole-cell lysate DC-CIK group (group L-D), the MDA-MB-231 CSC RNA DC-CIK group (group R-D), the THP DC-CIK group (group T-D) and group THP. Nude mice in groups D, L-D, R-D and T-D were injected with CSCs; 4 days later, the mice were inoculated with 1 × 10(6) DC-CIK cells via the tail vein. This injection was repeated 2 times a week for three weeks. The mice in groups THP and T-D were injected with a 5 mg/Kg dose of THP chemotherapeutic agents via the tail vein the day before DC-CIK injection, which was repeated one time a week for three weeks. Nude mice in the blank control group were injected with normal saline. The weights and sizes of the tumors were measured after the mice were euthanized. The expression of c-Myc, a key proto-oncogene associated with the Akt signaling pathway, was detected with RT-PCR. The tumor growth rates in each group were as follows: group L-D < group R-D < group D < group T-D < blank control group < group THP. The nude mice in groups L-D, R-D and D were normal, active and had a healthy appetite. The mice in groups T-D and THP were lethargic, less active and showed loss of appetite, and their caudal vein was easy to stimulate. The mice in the blank control group were sacrificed during the third week or when their tumors developed ulceration. Compared with the blank control group, c-Myc gene expression was reduced in the tumors of the five experimental groups. The results showed that DC-CIK cells stimulated by different methods were highly effect against MDA-MB-231 breast cancer stem cells in nude mice in all groups, especially in group L-D. DC-CIK immunotherapy may provide a new strategy for the clinical treatment of breast cancer.

Clinical study of double dose of valsartan combined with tacrolimus in treatment of diabetic nephropathy.

PubMed

Jin, H; Zhang, H-N; Hou, X-L; Zhang, B; Wu, J; Zhang, H-B

2016-01-01

To investigate the clinical effect of double dose of valsartan combined with tacrolimus in the treatment of diabetic nephropathy (DN). HA total of 86 cases diagnosed with DN were selected from October 2013 to October 2014 in Zaozhuang Municipal Hospital, China. The study was approved by our hospital Ethics Committee and written consent was obtained from patients and their family members. Patients were randomly divided into three groups according to the sequence of admission, group A (conventional dose of valsartan group, n = 28 cases), group B (double dose of valsartan group, n = 29 cases) and group C (double dose of valsartan combined with tacrolimus group, n = 29). Clinical effects were compared by analyzing the renal function tests after 8 weeks. 24h urine protein, serum creatinine level of patients in group B and group C were significantly lower than that of group A. Those in group C was much lower. The glomerular filtration rates were significantly higher for group B and C than that of group A, and those in group C were much higher. The difference is statistically significant (p < 0.05). High-sensitivity C-reactive protein (hs CRP) and adiponectin levels of patients in group B and C of were significantly lower than that of group A and those in group C were much lower. The difference is statistically significant (p < 0.05). The high mobility group protein 1 (HMGB1) and renal tubular and interstitial damage index (TDI) of patients in B and C groups were significantly lower than those in the A group, and those in C group were significantly lower. The difference was statistically significant p < 0.05). The clinical effective rates of patients in group B and C were significantly higher than that in group A, and those of group C were much higher. The difference is statistically significant (p < 0.05). The recurrence rates of patients in group B and group C were significantly lower than those of group A and those in group C were much lower. The difference is statistically significant (p < 0.05). Patients in three groups showed no obvious drug complications. Double dose of valsartan combined with tacrolimus treatment of DN patients can improve clinical symptoms, reducing inflammation, inhibiting or even reversing the interstitial fibrosis, which will improve the curative effect and reduce the recurrence, as to provide a new theoretical basis for the clinical treatment of the disease.

Effect of intravenous immunoglobulin on the function of Treg cells derived from immunosuppressed mice with Pseudomonas aeruginosa pneumonia.

PubMed

Li, Junlu; Chen, Tingsang; Yuan, Congcong; Zhao, Guoqiang; Xu, Min; Li, Xiaoyan; Cao, Jie; Xing, Lihua

2017-01-01

The present study aimed to investigate the effect of intravenous immunoglobulin (IVIG) on regulatory T (Treg) cells derived from immunosuppressed mice with Pseudomonas aeruginosa (PA) pneumonia. A total of 108 BALB/c mice were randomly divided into the following groups: control group (Control), immunosuppressed group (IS), PA pneumonia group (PA), PA pneumonia in immunosuppressed group (IS + PA), PA pneumonia with IVIG treatment in immunocompetent group (PA + IVIG) and PA pneumonia with IVIG treatment in immunosuppressed group (IS + PA + IVIG). Each group comprised 18 mice. The combined PA pneumonia in immunosuppressed model and the treatment models were established. The mice in each group were sacrificed at 4, 8, and 24 h time points. The general condition and pathological changes in the lung tissues of the mice were monitored. Reverse transcription-polymerase chain reaction was used to detect the forkhead box P3 (FOXP3) mRNA relative expression level in the lung tissues. The enzyme-linked immunosorbent assay was used to detect the serum concentration of active transforming growth factor beta (TGF-β). No inflammatory response were exhibited in the lung tissues of the mice in Control group and IS group, while varying degrees of acute lung injury were revealed in the mice in PA group, IS + PA group, PA + IVIG group and IS + PA + IVIG group. Lung tissue injury was most apparent at the 8 h time point, and it indicated the greatest effect in IS + PA group. Whereas tissue damages were alleviated in PA + IVIG group and IS + PA + IVIG group compared with IS + PA group. In addition, tissue damage lessened in PA + IVIG group compared with PA group and IS + PA + IVIG group. FOXP3 mRNA expression levels in the lung tissues and the serum concentration of TGF-β were lower in IS group, PA group, IS + PA group and IS + PA + IVIG group at the 4, 8 and 24 h time points, respectively compared with Control group. FOXP3 mRNA expression levels decreased in PA + IVIG group at the 4h time point and TGF-β serum concentrations decreased at the 4 and 8h time points compared with Control group, and subsequently increased. In the immunosuppred model with PA pneumonia, the immune system was greatly compromised. IVIG partially restored the immunosuppressed functions of Treg cells, suppressed the overactivated immune system and ameliorated the development of the disease.

Determining an anti-Mullerian hormone cutoff level to predict clinical pregnancy following in vitro fertilization in women with severely diminished ovarian reserve.

PubMed

Merhi, Zaher; Zapantis, Athena; Berger, Dara S; Jindal, Sangita K

2013-10-01

Serum anti-Mullerian hormone (AMH) levels estimate ovarian reserve. The purpose of this study was to identify a minimum serum AMH level that correlates with acceptable clinical pregnancy rate (CPR) in women with severe diminished ovarian reserve (DOR) undergoing in vitro fertilization (IVF). A historical cohort of severe DOR participants (age ≥35) with day 3 FSH of >10 ng/mL were included (n = 120). Participants were categorized into 3 groups: AMH <0.2 (Group 1, n = 38), AMH = 0.2-0.79 (Group 2, n = 57) and AMH ≥ 0.8 (Group 3, n = 25) ng/mL. The main outcome was CPR. The number of retrieved and mature oocytes, transferred embryos, spontaneous abortion (SAB) and live birth (LB) rates were also evaluated. Among the three groups, there was no difference in day 3 FSH and estradiol, total gonadotropins dose used per cycle, or LB. Participants in Group 1 were two years older than those in Group 2 and had significantly higher BMI than those in Groups 2 and 3. The three groups significantly differed in AFC (Group 1< Group 2< Group 3; p = 0.001) and cycle cancellation rate (Group 1> Group 2> Group 3; p = 0.006), and had a trend toward significance in SAB rate (Group 1> Group 2> Group 3; p = 0.06). Group 3 had significantly more retrieved and mature oocytes than Groups 1 or 2. Group 2 and 3 had significantly higher CPR per cycle start compared to Group 1. Although Group 2 had significantly fewer oocytes retrieved and mature oocytes than Group 3, CPR per cycle start for both groups was not different. ROC curve indicated that the point of maximal inflection between lower and higher CPR represents an AMH value of 0.2 ng/mL. AMH of 0.2 ng/mL appears to be a meaningful threshold for predicting CPR in women with severe DOR at our practice. This information can be crucial during the pre-cycle counseling of these women.

Effect of in-home fortification of complementary feeding on intellectual development of Chinese children.

PubMed

Chen, Chun-Ming; Wang, Yu-Ying; Chang, Su-Ying

2010-04-01

To explore the effect of in-home fortification of complementary feeding on intellectual development of Chinese children aged below 24 months. One thousand and four hundred seventy eight children aged 4-12 months were recruited and divided into study groups (formula 1 group and formula 2 group) and control group. In two study groups, in addition to the usual complementary food, children were fed with a sachet of fortified food supplement each day. Protein and micronutrients were provided in formula 1 group. Formula 2 group had the same energy intake as the formula 1 group . In addition to measurement of physical growth and detection of hemoglobin level, Development Quotient (DQ) or Intelligence Quotient (IQ) was assessed. The DQ of children aged below 24 months was 97.2, 95.5, and 93.8 in formula 1 group, formula 2 group and control group, respectively, and the differences were statistically significant (P < 0.05). The DQ of children in formula 1 group, formula 2 group, and control group was 92.7, 90.4, and 88.3 respectively in the first follow up showing statistically significant differences (P < 0.05). And, DQ of children in formula 1 group, formula 2 group and control group were 96.7, 94.5, and 93.7 respectively in the second follow up, showing statistically significant differences (P < 0.05). Full-IQ of children in the formula 1 group was 3.1 and 4.5 points higher than that in formula 2 group and in control group respectively. Verbal IQ of children in the formula 1 group was 2.1 and 5 points higher than that in formula 2 group and control group respectively. Performance IQ was 2.5 and 3.1 points higher than that in formula 2 group and control group respectively. All above mentioned comparisons were statistically significant. Fortification of complementary feeding showed persistent effect on intelligence development of young children which could persist to 6 years of age. The critical time for correction of anemia could be under 18 months.

Learning basic laparoscopic skills: a randomized controlled study comparing box trainer, virtual reality simulator, and mental training.

PubMed

Mulla, Mubashir; Sharma, Davendra; Moghul, Masood; Kailani, Obeda; Dockery, Judith; Ayis, Salma; Grange, Philippe

2012-01-01

The objectives of this study were (1) to compare different methods of learning basic laparoscopic skills using box trainer (BT), virtual reality simulator (VRS) and mental training (MT); and (2) to determine the most effective method of learning laparoscopic skills. Randomized controlled trial. King's College, London. 41 medical students were included in the study. After randomization, they were divided into 5 groups. Group 1 was the control group without training; group 2 was box trained; group 3 was also box trained with an additional practice session; group 4 was VRS trained; and group 5 was solely mentally trained. The task was to cut out a circle marked on a stretchable material. All groups were assessed after 1 week on both BT and VRS. Four main parameters were assessed, namely time, precision, accuracy, and performance. Time: On BT assessment, the box-trained group with additional practice group 3 was the fastest, and the mental-trained group 5 was the slowest. On VRS assessment, the time difference between group 3 and the control group 1 was statistically significant. Precision: On BT assessment, the box-trained groups 2 and 3 scored high, and mental trained were low on precision. On VRS assessment, the VRS-trained group ranked at the top, and the MT group was at the bottom on precision. Accuracy: On BT assessment, the box-trained group 3 was best and the mental-trained group was last. On VRS assessment, the VRS-trained group 4 scored high closely followed by box-trained groups 2 and 3. Performance: On BT assessment, the box-trained group 3 ranked above all the other groups, and the mental-trained group ranked last. On VRS assessment, the VRS group 4 scored best, followed closely by box-trained groups 2 and 3. The skills learned on box training were reproducible on both VRS and BT. However, not all the skills learned on VRS were transferable to BT. Furthermore, VRS was found to be a reliable and the most convenient method of assessment. MT alone cannot replace conventional training. Copyright © 2012 Association of Program Directors in Surgery. Published by Elsevier Inc. All rights reserved.

Frequencies and ethnic distribution of ABO and RhD blood groups in China: a population-based cross-sectional study.

PubMed

Liu, Jue; Zhang, Shikun; Wang, Qiaomei; Shen, Haiping; Zhang, Yiping; Liu, Min

2017-12-03

ABO and RhD blood groups are key factors affecting blood transfusion safety. The distribution of ABO and RhD blood groups varies globally, but limited data exist for ethnic distributions of these blood groups in Asian populations. We aimed to evaluate the distribution of ABO and RhD blood groups among Chinese ethnic groups. A population-based cross-sectional study. Data on ABO groups and ethnicities were obtained from the National Free Preconception Health Examination Project (NFPHEP) with participants from 220 counties of 31 provinces in China PARTICIPANTS: There were 3 832 034 participants aged 21-49 years who took part in the NFPHEP from January 2010 to December 2012 and were included in this study. The proportion of ABO and RhD blood groups among different ethnic groups was calculated. ABO and RhD blood distribution was significantly different among nine ethnic groups (P<0.001). Compared with other ethnic groups, the Yi group had more A phenotypes (34.0%), and the Manchu (33.7%) and Mongolian (33.3%) ethnic groups had more B phenotypes. The Zhuang group had the greatest proportion of O phenotypes (41.8%), followed by the Miao group (37.7%). AB phenotypes were more frequent in the Uygur ethnic group (10.6%) but lower in the Zhuang group (5.5%). Meanwhile, RhD negativity (RhD-) was greater in the Uygur group (3.3%) than in the Mongolian (0.3%) and Manchu ethnic groups (0.4%). O RhD- blood groups were more frequent in the Uygur group (0.8%) than in the other ethnic groups (0.1%-0.4%, P<0.001). ABO and RhD blood phenotypes vary across different ethnic groups in China. The diversity in the distribution of the ABO and RhD blood groups in different ethnic groups should be considered when developing rational and evidence-based strategies for blood collection and management. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Anxiety and depression propensities in patients with acute toxic liver injury

PubMed Central

Suh, Jeong Ill; Sakong, Jeong Kyu; Lee, Kwan; Lee, Yong Kook; Park, Jeong Bae; Kim, Dong Joon; Seo, Yeon Seok; Lee, Jae Dong; Ko, Soon Young; Lee, Byung Seok; Kim, Seok Hyun; Kim, Byung Seok; Kim, Young Seok; Lee, Heon Ju; Kim, In Hee; Sohn, Joo Hyun; Kim, Tae Yeob; Ahn, Byung Min

2013-01-01

AIM: To investigate anxiety and depression propensities in patients with toxic liver injury. METHODS: The subjects were divided into three groups: a healthy control group (Group 1, n = 125), an acute non-toxic liver injury group (Group 2, n = 124), and a group with acute toxic liver injury group caused by non-commercial herbal preparations (Group 3, n = 126). These three groups were compared and evaluated through questionnaire surveys and using the Hospital Anxiety-Depression Scale (HADS), Beck Anxiety Inventory (BAI), Beck Depression Inventory (BDI), and the hypochondriasis scale. RESULTS: The HADS anxiety subscale was 4.9 ± 2.7, 5.0 ± 3.0 and 5.6 ± 3.4, in Groups 1, 2, and 3, respectively. The HADS depression subscale in Group 3 showed the most significant score (5.2 ± 3.2, 6.4 ± 3.4 and 7.2 ± 3.4 in Groups 1, 2, and 3, respectively) (P < 0.01 vs Group 1, P < 0.05 vs Group 2). The BAI and BDI in Group 3 showed the most significant score (7.0 ± 6.3 and 6.9 ± 6.9, 9.5 ± 8.6 and 8.8 ± 7.3, 10.7 ± 7.2 and 11.6 ± 8.5 in Groups 1, 2, and 3, respectively) (BAI: P < 0.01 vs Group 1, P < 0.05 vs Group 2) (BDI: P < 0.01 vs Group 1 and 2). Group 3 showed a significantly higher hypochondriasis score (8.2 ± 6.0, 11.6 ± 7.5 and 13.1 ± 6.5 in Groups 1, 2, and 3, respectively) (P < 0.01 vs Group 1, P < 0.05 vs Group 2). CONCLUSION: Psychological factors that present vulnerability to the temptation to use alternative medicines, such as herbs and plant preparations, are important for understanding toxic liver injury. PMID:24379633

The effects of intravenous, enteral and combined administration of glutamine on malnutrition in sepsis: a randomized clinical trial.

PubMed

Koksal, Guniz Meyancı; Erbabacan, Emre; Tunali, Yusuf; Karaoren, Gulsah; Vehid, Suphi; Oz, Huseyin

2014-01-01

Our aim was to compare the effects of intravenous, enteral, and enteral plus intravenous supplemented glutamine on plasma transferrin, nitrogen balance, and creatinine/height index in septic patients with malnutrition. Blood and urine samples were collected for transferrin, urea and creatinine measurements. Samples, SOFA score and protein-calorie intake values were repeated on days 7 and 15. Patients (n:120) were randomly divided into 4 groups. Group I received 30 g/day IV glutamine, group II received 30 g/day enteral glutamine, group III received 15 g/day IV and 15 g/day enteral glutamine. Group IV received only enteral feeding as a control group. Transferrin levels decreased in group IV (p<0.01 0-7 days, p<0.01 7-15 days, p<0.01 0-15 days). Nitrogen balance levels were highest in group IV when compared with group I (p<0.05, p<0.001), group II (p<0.001), and group III (p<0.05, p<0.001) on days 7-15. Creatinine/height indexes increased in group I (p<0.001), group II (p<0.001), group III (p<0.001), and group IV (p<0.05) on day 15. In group III the creatinine/height index was higher than in groups I and II (p<0.05). In group IV, creatinine/height index was lower than in group I (p<0.01) and group II (p<0.001). Protein-calorie intake in group IV was higher than others on day 7 (p<0.05). SOFA scores of group IV were higher than the other groups on day 15 (p<0.05). This study demonstrated, that combined route of gln supplementation resulted in the most positive outcome to transferrin, creatine/height index and nitrogen balance (on days 7 and 15) during the catabolic phase of septic patients with malnutrition.