A new class of hybrid anticancer agents inspired by the synergistic effects of curcumin and genistein: Design, synthesis, and anti-proliferative evaluation.

PubMed

Chen, Qiao-Hong; Yu, Kevin; Zhang, Xiaojie; Chen, Guanglin; Hoover, Andrew; Leon, Francisco; Wang, Rubing; Subrahmanyam, Nithya; Addo Mekuria, Ermias; Harinantenaina Rakotondraibe, Liva

2015-10-15

Inspired by the synergistic effects of dietary natural products with different scaffolds on the inhibition of cancer cell proliferation, incorporation of central (1E,4E)-1,4-penta-dien-3-one linker (an optimal substitute for the central metabolically unstable diketone linker of curcumin), 1-alkyl-1H-imidazol-2-yl (a promising bioisostere of terminal aryl group in curcumin), and chromone (the common pharmacophore in genistein and quercetin) into one chemical entity resulted in ten new hybrid molecules, 3-((1E,4E)-5-(1-alkyl-1H-imidazol-2-yl)-3-oxopenta-1,4-dien-1-yl)-4H-chromen-4-ones. They were synthesized through a three-step transformation using acid-catalyzed aldol condensation as key step. The WST-1 cell proliferation assay showed that they have greater anti-proliferative potency than curcumin, quercetin, and genistein on both androgen-dependent and androgen-independent human prostate cancer cells. Published by Elsevier Ltd.

Cooking enhances curcumin anti-cancerogenic activity through pyrolytic formation of "deketene curcumin".

PubMed

Dahmke, Indra N; Boettcher, Stefan P; Groh, Matthias; Mahlknecht, Ulrich

2014-05-15

Curcumin is widely used in traditional Asian kitchen as a cooking ingredient. Despite its low bioavailability, epidemiological data, on low cancer incidence in Asia, suggest beneficial health effects of this compound. Therefore, the question arose whether cooking modifies the anti-cancerogenic effects of curcumin. To evaluate this, we pyrolysed curcumin with and without coconut fat or olive oil, and analysed the products by high-performance liquid chromatography (HPLC). A number of more hydrophilic curcumin isoforms and decomposition products, including a compound later identified by nuclear magnetic resonance spectroscopy (NMR) as "deketene curcumin" (1,5-bis(4-hydroxy-3-methoxyphenyl)-1,4-pentadiene-3-one), formerly described as a synthetic curcumin derivative, were detected. Additionally, we proved that deketene curcumin, compared to curcumin, exhibits higher toxicity on B78H1 melanoma cells resulting in G2 arrest. In conclusion, deketene curcumin is formed as a consequence of pyrolysis during common household cooking, showing stronger anti-cancer effects than curcumin. Moreover, we propose a chemical reaction-pathway for this process. Copyright © 2013 Elsevier Ltd. All rights reserved.

Part I. Synthesis and characterization of donor-pi-acceptor compounds with pentadienyl-bridged indoline and tetrahydroquinoline donors and aldehyde and thiobarbituric acid acceptors Part II. Longitudinal study comparing online versus face-to-face course delivery in introductory chemistry

NASA Astrophysics Data System (ADS)

Greco, Patrick F.

Part I. The design and development of organic second-order nonlinear optical (NLO) materials have attracted much interest due to their applications in optoelectronic devices and modern communications technology. Donor-pi-acceptor compounds, D-(CH=CH)n-A, often exhibit hyperpolarizability that results in laser frequency doubling (second harmonic generation) and spectroscopic solvatochromism. To study the effect of donor amine geometry upon properties associated with second-order NLO behavior in simple donor-pi-acceptor compounds, equilibrium geometries and hyperpolarizabilities (beta) for donor-acceptor polyenes with amine donors were calculated at several levels of computational theory. Two new molecules with donors that only differ by one methylene group were chosen for comparison. Thus, 5-(N-methylindolin-5-yl)-2, 4-pentadienal (1a) and 5-(N-methyl-2, 3, 4-trihydroquinolin-6-yl)-2, 4-pentadienal (2a) were synthesized in two steps from starting materials described in the literature. These aldehydes were converted into stronger acceptors in one step to give diethylthiobarbituric acid derivatives 1c and 2c, as well as tricyanofuran derivatives 1d and 2d. Positive UV solvatochromism was observed in all three derivatives. NMR solvatochromism was most pronounced in 1c, and 2c vs. 1a and 2a as measured by changes in chemical shifts. Additionally, coupling constants showed more conjugation in 1c and 2c, where 1a and 2a showed less conjugation. Finally, differential scanning calorimetry and thermal gravimetric analysis were used to compare decomposition and melting temperatures of these compounds to determine their stability. Aldehydes, 1a and 2a had distinct melting points, while the 1c, 2c, 1d, and 2d derivatives decomposed at temperatures above 150 °C. Part II. This longitudinal study focused on an introductory chemistry course taught using two different modes of delivery: online and face-to-face (FtF). The sections of the course using the different delivery modes covered the same material at the same level, used the same textbook, and were taught by the same instructor. Student success was tracked over a period of nine consecutive years along with other important dependent variables including the number of developmental courses taken, student age, math and reading placement scores, overall GPA and full time status. Surprisingly, student success correlated negatively to their placement scores. The students who chose the online course had higher overall GPA's and better placement test scores than the FtF students. Despite these advantages, online students were less successful than their FtF counterparts. This result suggests that FtF instruction was more effective, even with better students. These findings have important implications for institutions evaluating the role online instruction will play at their institutions.

Dual emission of chalcone-analogue dyes emitting in the red region

NASA Astrophysics Data System (ADS)

Fayed, Tarek A.; Awad, Mohamed K.

2004-08-01

The photophysical properties of new synthesized chalcones namely; 1-(4 '-R-phenyl)-5-(4 '-dimethylaminophenyl)-2,4- pentadien-1-one, [R=H ( 1), Cl ( 2) and OCH 3 ( 3)] were studied in different solvents by using steady-state absorption and emission spectroscopy. The fluorescence spectra of these chalcones exhibit dual emission in medium and polar solvents. The dual emission was attributed to population of a polar locally excited (LE) state and a highly dipolar intramolecular charge transfer (ICT) state. The changes in dipole moments upon excitation were calculated from the solvatochromic plots. The total fluorescence quantum yields ( φf) were also determined, and their values are strongly dependent on the nature of substitutent and the solvent polarity. Semiempirical molecular orbital calculations using the atom superposition and electron delocalization molecular orbital (ASED-MO) method were also performed to investigate the molecular and electronic structures of these chalcones in both the ground and excited state. The change of the dipole moment upon excitation was explained on the basis of changes in the charge redistribution over the whole skeleton of the molecules, which agree well with the experimental results. Also, the nature and energy of the electronic transitions were elucidated and discussed in relation to the experimental data.

TALEN-Based Mutagenesis of Lipoxygenase LOX3 Enhances the Storage Tolerance of Rice (Oryza sativa) Seeds.

PubMed

Ma, Lei; Zhu, Fugui; Li, Zhenwei; Zhang, Jianfu; Li, Xin; Dong, Jiangli; Wang, Tao

2015-01-01

The deterioration of rice grain reduces the quality of rice, resulting in serious economic losses for farmers. Lipoxygenases (LOXs) catalyze the dioxygenation of polyunsaturated fatty acids with at least one cis,cis-1,4-pentadiene to form hydroperoxide, which is a major factor influencing seed longevity and viability. Recently, genome editing, an essential tool employed in reverse genetics, has been used experimentally to investigate basic plant biology or to modify crop plants for the improvement of important agricultural traits. In this study, we performed targeted mutagenesis in rice using transcription activator-like effector nucleases (TALENs) to improve seed storability. A modified ligation-independent cloning method (LIC) was employed to allow for the quick and efficient directional insertion of TALEN monomer modules into destination vectors used in plants. We demonstrated the feasibility and flexibility of the technology by developing a set of modular vectors for genome editing. After construction and validation, the TALEN pairs were used to create stable transgenic rice lines via Agrobacterium-mediated transformation. One heterozygous mutant (4%) was recovered from 25 transgenic NPTII-resistant lines, and the mutation was transmitted to the next generation. Further molecular and protein level experiments verified LOX3 deficiency and demonstrated the improvement of seed storability. Our work provides a flexible genome editing tool for improving important agronomic traits, as well as direct evidence that Lox3 has only a limited impact on seed longevity.

TALEN-Based Mutagenesis of Lipoxygenase LOX3 Enhances the Storage Tolerance of Rice (Oryza sativa) Seeds

PubMed Central

Li, Zhenwei; Zhang, Jianfu; Li, Xin; Dong, Jiangli; Wang, Tao

2015-01-01

The deterioration of rice grain reduces the quality of rice, resulting in serious economic losses for farmers. Lipoxygenases (LOXs) catalyze the dioxygenation of polyunsaturated fatty acids with at least one cis,cis-1,4-pentadiene to form hydroperoxide, which is a major factor influencing seed longevity and viability. Recently, genome editing, an essential tool employed in reverse genetics, has been used experimentally to investigate basic plant biology or to modify crop plants for the improvement of important agricultural traits. In this study, we performed targeted mutagenesis in rice using transcription activator-like effector nucleases (TALENs) to improve seed storability. A modified ligation-independent cloning method (LIC) was employed to allow for the quick and efficient directional insertion of TALEN monomer modules into destination vectors used in plants. We demonstrated the feasibility and flexibility of the technology by developing a set of modular vectors for genome editing. After construction and validation, the TALEN pairs were used to create stable transgenic rice lines via Agrobacterium-mediated transformation. One heterozygous mutant (4%) was recovered from 25 transgenic NPTII-resistant lines, and the mutation was transmitted to the next generation. Further molecular and protein level experiments verified LOX3 deficiency and demonstrated the improvement of seed storability. Our work provides a flexible genome editing tool for improving important agronomic traits, as well as direct evidence that Lox3 has only a limited impact on seed longevity. PMID:26641666

Analysis of the Rotational Structure in the High-Resolution Infrared Spectrum of TRANS-HEXATRIENE-1-13C1

NASA Astrophysics Data System (ADS)

Craig, Norman C.; Tian, Hengfeng; Blake, Thomas A.

2011-06-01

Hexatriene-1-13C1 was synthesized by reaction of 2,4-pentadienal and (methyl-13C)-triphenylphosphonium iodide (Wittig reagent). The trans isomer was isolated by preparative gas chromatography, and the high-resolution (0.0015 Cm-1) infrared spectrum was recorded on a Bruker IFS 125HR instrument. The rotational structure in two C-type bands was analyzed. For this species the bands at 1010.7 and 893.740 Cm-1 yielded composite ground state rotational constants of A0 = 0.872820(1), B0 = 0.0435868(4), and C0 = 0.0415314(2) Cm-1. The ground state rotational constants for the 1-13C species were also predicted with Gaussian 03 software and the B3LYP/cc-pVTZ model. After scaling by the ratio of the observed and predicted ground state rotational constants for the normal species, the predicted ground state rotational constants for the 1-13C species agreed within 0.005 % with the observed values. Similar good agreement between observed and calculated values (0.016 %) was found for the three 13C species of the cis isomer. We conclude that ground state rotational constants for single heavy atom substitution can be calculated with adequate accuracy for use in determining semi-experimental equilibrium structures of small molecules. It will be unnecessary to synthesize the other two 13C species of trans-hexatriene. R. D. Suenram, B. H. Pate, A. Lesarri, J. L. Neill, S. Shipman, R. A. Holmes, M. C. Leyden, N. C. Craig J. Phys. Chem. A 113, 1864-1868 (2009).

Omega-3 fatty acids are oxygenated at the n-7 carbon by the lipoxygenase domain of a fusion protein in the cyanobacterium Acaryochloris marina

PubMed Central

Gao, Benlian; Boeglin, William E.; Brash, Alan R.

2009-01-01

Lipoxygenases (LOX) are found in most organisms that contain polyunsaturated fatty acids, usually existing as individual genes although occasionally encoded as a fusion protein with a catalase-related hemoprotein. Such a fusion protein occurs in the cyanobacterium Acaryochloris marina and herein we report the novel catalytic activity of its LOX domain. The full-length protein and the C-terminal LOX domain were expressed in Escherichia coli, and the catalytic activities characterized by UV, HPLC, GC-MS, and CD. All omega-3 polyunsaturates were oxygenated by the LOX domain at the n-7 position and with R stereospecificity: α-linolenic and the most abundant fatty acid in A. marina, stearidonic acid (C18.4ω3), are converted to the corresponding 12R-hydroperoxides, eicosapentaenoic acid to its 14R-hydroperoxide, and docosahexaenoic acid to its 16R-hydroperoxide. Omega-6 polyunsaturates were oxygenated at the n-10 position, forming 9R-hydroperoxy-octadecadienoic acid from linoleic acid and 11R-hydroperoxy-eicosatetraenoic acid from arachidonic acid. The metabolic transformation of stearidonic acid by the full-length fusion protein entails its 12R oxygenation with subsequent conversion by the catalase-related domain to a novel allene epoxide, a likely precursor of cyclopentenone fatty acids or other signaling molecules (Gao et al, J. Biol. Chem. 284:22087-98, 2009). Although omega-3 fatty acids and lipoxygenases are of widespread occurrence, this appears to be the first description of a LOX-catalyzed oxygenation that specifically utilizes the terminal pentadiene of omega-3 fatty acids. PMID:19786119

Aqueous catalysis: Methylrhenium trioxide (MTO) as a homogeneous catalyst for the Diels-Alder reaction

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhu, Z.; Espenson, J.H.

1997-04-16

The title compound proves to be an effective and efficient catalyst for the Diels-Alder reaction when the dienophile is an {alpha},{beta}-unsaturated ketone or aldehyde. It is especially effective in water. Equal amounts of any such dienophile and any of six representative dienes (isoprene, 2-methyl-1,3-pentadiene, 2,3-dimethyl-1,3-butadiene, cyclopentadiene, 1,2,3,4,5,-pentamethylcyclopentadiene, and 1,3-cyclohexadiene) were used, along with 1% MTO. The reactions gave usually > 90% isolated yield of the cycloaddition product except for the larger dienophiles. Nearly exclusively, there was formed one product isomer, the same one that usually predominates. The reactions were often run in chloroform (mostly) and in other organic solvents. Amore » select number were carried out in water, where the reactions gave a greater product yield in a considerably shorter time. Water, itself, is known to enhance the rates of Diels-Alder reactions, but MTO exerts an additional accelerating effect. Kinetics studies were carried out to show that the rate is proportional to the catalyst concentration. The products do not inhibit the reaction. The desirability of MTO as a Diels-Alder catalyst stems from a combination of favorable properties: the inertness to air/oxygen, the tolerance for many substrates, the use of an aqueous medium, and the absence of product inhibition. The initial step appears to be the (weak) coordination of the carbonyl oxygen to the electropositive rhenium center. Steric crowding around rhenium inhibits reactions of the larger dienophiles. 26 refs., 3 figs., 4 tabs.« less

Decomposition and reactivity of tellurium alkyls in the liquid and gas phases; dihex-5-enyltellurium and dipent-4-enyltellurium as mechanistic probes

NASA Astrophysics Data System (ADS)

Bell, William; McQueen, A. Ewan D.; Walton, John C.; Foster, Douglas F.; Cole-Hamilton, David J.; Hails, Janet E.

1992-02-01

The new tellurium alkyls, dihex-5-enyltellurium and dipent-4-enyltellurium have been prepared and pyrolysed in the gas and liquid phases. in the liquid phase, at 200°C some decomposition occurs but the main isolated products are the tellurium alkyls, bis(cyclopentylmethyl)tellurium and 2-methyltelluracyclopentane respectively. A further product, cyclopentylmethylhex-5-enyltellurium is observed as an intermediate in the rearrangement of dihex-5-enyltellurium, whilst (2-telluracyclopentylmethyl)pent-4-enyltellurium together with pent-1-ene and 1,4-pentadiene is obtained from dipent-4-enyltellurium. These products are interpreted as providing direct evidence for initial homolytic cleavage of the Te-C bonds followed by cyclisation of some of the formed radicals and radical chain reactions. In the gas phase, at 500°C similar products to those obtained in the liquid phase are formed from dipent-4-enyltellurium, although not compounds containing more than one Te atom. Dihex-5-enyltellurium, however, decomposes completely in the gas phase at 700°C to give a mixture of hydrocarbons. Substantial quantities of methylcyclopentane and methylenecyclopentane again confirm that a free radical pathway makes a major contribution to the mechanism. The origin of the other products, especially cyclohexene (the major C 6 product) and cyclohexane is also interpreted in terms of a free radical mechanism leading to the 6-tellurahex-1-enyl radical which cyclises to give the 3-telluracycloheptylradical. This radical rearranges to cyclohexyl Te· which in turn acts as the source of cyclohexene and cyclohexane by H· abstraction or addition. There is little evidence that mechanisms other than free radical operate for decomposition of these metal alkyls.

Crystal Structure of Manganese Lipoxygenase of the Rice Blast Fungus Magnaporthe oryzae*

PubMed Central

Wennman, Anneli; Oliw, Ernst H.; Karkehabadi, Saeid; Chen, Yang

2016-01-01

Lipoxygenases (LOX) are non-heme metal enzymes, which oxidize polyunsaturated fatty acids to hydroperoxides. All LOX belong to the same gene family, and they are widely distributed. LOX of animals, plants, and prokaryotes contain iron as the catalytic metal, whereas fungi express LOX with iron or with manganese. Little is known about metal selection by LOX and the adjustment of the redox potentials of their protein-bound catalytic metals. Thirteen three-dimensional structures of animal, plant, and prokaryotic FeLOX are available, but none of MnLOX. The MnLOX of the most important plant pathogen, the rice blast fungus Magnaporthe oryzae (Mo), was expressed in Pichia pastoris. Mo-MnLOX was deglycosylated, purified to homogeneity, and subjected to crystal screening and x-ray diffraction. The structure was solved by sulfur and manganese single wavelength anomalous dispersion to a resolution of 2.0 Å. The manganese coordinating sphere is similar to iron ligands of coral 8R-LOX and soybean LOX-1 but is not overlapping. The Asn-473 is positioned on a short loop (Asn-Gln-Gly-Glu-Pro) instead of an α-helix and forms hydrogen bonds with Gln-281. Comparison with FeLOX suggests that Phe-332 and Phe-525 might contribute to the unique suprafacial hydrogen abstraction and oxygenation mechanism of Mo-MnLOX by controlling oxygen access to the pentadiene radical. Modeling suggests that Arg-525 is positioned close to Arg-182 of 8R-LOX, and both residues likely tether the carboxylate group of the substrate. An oxygen channel could not be identified. We conclude that Mo-MnLOX illustrates a partly unique variation of the structural theme of FeLOX. PMID:26783260

Chemical structures of low-pressure premixed methylcyclohexane flames as benchmarks for the development of a predictive combustion chemistry model

DOE PAGES

Skeen, Scott A.; Yang, Bin; Jasper, Ahren W.; ...

2011-11-14

The chemical compositions of three low-pressure premixed flames of methylcyclohexane (MCH) are investigated with the emphasis on the chemistry of MCH decomposition and the formation of aromatic species, including benzene and toluene. The flames are stabilized on a flat-flame (McKenna type) burner at equivalence ratios of φ = 1.0, 1.75, and 1.9 and at low pressures between 15 Torr (= 20 mbar) and 30 Torr (= 40 mbar). The complex chemistry of MCH consumption is illustrated in the experimental identification of several C 7H 12, C 7H 10, C 6H 12, and C 6H 10 isomers sampled from the flamesmore » as a function of distance from the burner. Three initiation steps for MCH consumption are discussed: ring-opening to heptenes and methyl-hexenes (isomerization), methyl radical loss yielding the cyclohexyl radical (dissociation), and H abstraction from MCH. Mole fraction profiles as a function of distance from the burner for the C 7 species supplemented by theoretical calculations are presented, indicating that flame structures resulting in steeper temperature gradients and/or greater peak temperatures can lead to a relative increase in MCH consumption through the dissociation and isomerization channels. Trends observed among the stable C 6 species as well as 1,3-pentadiene and isoprene also support this conclusion. Relatively large amounts of toluene and benzene are observed in the experiments, illustrating the importance of sequential H-abstraction steps from MCH to toluene and from cyclohexyl to benzene. Furthermore, modeled results using the detailed chemical model of Pitz et al. (Proc. Combust. Inst.2007, 31, 267–275) are also provided to illustrate the use of these data as a benchmark for the improvement or future development of a MCH mechanism.« less

Controlling factors of oligomerization at the water surface: why is isoprene such a unique VOC?

PubMed

Ishizuka, Shinnosuke; Fujii, Tomihide; Matsugi, Akira; Sakamoto, Yosuke; Hama, Tetsuya; Enami, Shinichi

2018-06-06

Recent studies have shown that atmospheric particles are sufficiently acidic to enhance the uptake of unsaturated volatile organic compounds (VOCs) by triggering acid-catalyzed oligomerization. Controlling factors of oligomerization at the aqueous surfaces, however, remain to be elucidated. Herein, isoprene (2-methyl-1,3-butadiene, ISO), 1,3-butadiene (1,3-b), 1,4-pentadiene (1,4-p), 1-pentene (1-p), and 2-pentene (2-p) vapors are exposed to an acidic water microjet (1 ≤ pH ≤ 5), where cationic products are generated on its surface within ∼10 μs and directly detected using surface-sensitive mass spectrometry. We found that carbocations form at the air-water interface in all the cases, whereas the extent of oligomerization largely depends on the structure in the following order: ISO ≫ 1,3-b > 1,4-p ≫ 1-p ≈ 2-p. Importantly, the cationic oligomerization of ISO yields a protonated decamer ((ISO)10H+, a C50 species of m/z 681.6), while the pentenes 1-p/2-p remain as protonated monomers. We suggest that ISO oligomerization is uniquely facilitated by (1) the resonance stabilization of (ISO)H+ through the formation of a tertiary carbocation with a conjugated C[double bond, length as m-dash]C bond pair, and (2) π-electron enrichment induced by the neighboring methyl group. Experiments in D2O and D2O : H2O mixtures revealed that ISO oligomerization on the acidic water surface proceeds via two competitive mechanisms: chain-propagation and proton-exchange reactions. Furthermore, we found that ISO carbocations undergo addition to relatively inert 1-p, generating hitherto uncharacterized co-oligomers.

Antifungal effect of volatile organic compounds produced by Bacillus amyloliquefaciens CPA-8 against fruit pathogen decays of cherry.

PubMed

Gotor-Vila, A; Teixidó, N; Di Francesco, A; Usall, J; Ugolini, L; Torres, R; Mari, M

2017-06-01

The present work focuses on the antifungal effect of volatile organic compounds (VOCs) produced by Bacillus amyloliquefaciens CPA-8 against Monilinia laxa, M. fructicola and Botrytis cinera, three postharvest fruit pathogens of sweet cherry fruit. VOCs were evaluated with a double petri dish assay against mycelial and colony growth of target pathogens. For this purpose, CPA-8 was grown on different media and cultured for 24 and 48 h at 30 °C before assays. Data showed that mycelial growth inhibition was higher when CPA-8 was grown on Tryptone Soya Agar (TSA) while no differences were generally observed when CPA-8 was cultured for either, 24 and 48 h. Moreover, no effects were observed on colony growth. The main volatile compounds emitted by CPA-8 were identified by solid-phase microextraction (SPME)-gas chromatography as 1,3 pentadiene, acetoin (3-hydroxy-2-butanone) and thiophene. Pure compounds were also tested in vitro on mycelial growth inhibition and their EC 50 values against the three pathogens were estimated. Thiophene was the most effective VOC, showing more than 82% suppression of mycelial growth at the highest concentration (1.35 μL/mL headspace) and EC 50 values ranging from 0.06 to 6.67 μL/mL headspace. Finally, the effectiveness of thiophene and CPA-8 VOCs was evaluated against artificially inoculated cherry fruits. Among the target pathogens, M. fructicola was clearly controlled by CPA-8 with less than 25% of rotten fruits compared to the control (65% disease incidence) and for all pathogens, less than 37.5% of CPA-8 treated decayed fruits produced spores (disease sporulation). Otherwise, pure thiophene showed no effect against any pathogen on disease incidence and disease sporulation. The results indicated that VOCs produced by B. amyloliquefaciens CPA-8 could develop an additive antifungal effect against postharvest fruit pathogens on stone fruit. Copyright © 2017 Elsevier Ltd. All rights reserved.

Mechanical characterization and structural analysis of recycled fiber-reinforced-polymer resin-transfer-molded beams

NASA Astrophysics Data System (ADS)

Tan, Eugene Wie Loon

1999-09-01

The present investigation was focussed on the mechanical characterization and structural analysis of resin-transfer-molded beams containing recycled fiber-reinforced polymers. The beams were structurally reinforced with continuous unidirectional glass fibers. The reinforcing filler materials consisted entirely of recycled fiber-reinforced polymer wastes (trim and overspray). The principal resin was a 100-percent dicyclo-pentadiene unsaturated polyester specially formulated with very low viscosity for resin transfer molding. Variations of the resin transfer molding technique were employed to produce specimens for material characterization. The basic materials that constituted the structural beams, continuous-glass-fiber-reinforced, recycled-trim-filled and recycled-overspray-filled unsaturated polyesters, were fully characterized in axial and transverse compression and tension, and inplane and interlaminar shear, to ascertain their strengths, ultimate strains, elastic moduli and Poisson's ratios. Experimentally determined mechanical properties of the recycled-trim-filled and recycled-overspray-filled materials from the present investigation were superior to those of unsaturated polyester polymer concretes and Portland cement concretes. Mechanical testing and finite element analyses of flexure (1 x 1 x 20 in) and beam (2 x 4 x 40 in) specimens were conducted. These structurally-reinforced specimens were tested and analyzed in four-point, third-point flexure to determine their ultimate loads, maximum fiber stresses and mid-span deflections. The experimentally determined load capacities of these specimens were compared to those of equivalent steel-reinforced Portland cement concrete beams computed using reinforced concrete theory. Mechanics of materials beam theory was utilized to predict the ultimate loads and mid-span deflections of the flexure and beam specimens. However, these predictions proved to be severely inadequate. Finite element (fracture propagation) analyses of the flexure and beam specimens were also performed. These progressive failure analyses more closely approximated flexural behavior under actual testing conditions by reducing the elastic moduli of elements that were considered to have partially or totally failed. Individual element failures were predicted using the maximum stress, Tsai-Hill and Tsai-Wu failure criteria. Excellent predictions of flexural behavior were attributed to the progressive failure analyses combined with an appropriate failure criterion, and the reliable input material properties that were generated.

In situ measurements and modeling of reactive trace gases in a small biomass burning plume

NASA Astrophysics Data System (ADS)

Müller, Markus; Anderson, Bruce E.; Beyersdorf, Andreas J.; Crawford, James H.; Diskin, Glenn S.; Eichler, Philipp; Fried, Alan; Keutsch, Frank N.; Mikoviny, Tomas; Thornhill, Kenneth L.; Walega, James G.; Weinheimer, Andrew J.; Yang, Melissa; Yokelson, Robert J.; Wisthaler, Armin

2016-03-01

An instrumented NASA P-3B aircraft was used for airborne sampling of trace gases in a plume that had emanated from a small forest understory fire in Georgia, USA. The plume was sampled at its origin to derive emission factors and followed ˜ 13.6 km downwind to observe chemical changes during the first hour of atmospheric aging. The P-3B payload included a proton-transfer-reaction time-of-flight mass spectrometer (PTR-ToF-MS), which measured non-methane organic gases (NMOGs) at unprecedented spatiotemporal resolution (10 m spatial/0.1 s temporal). Quantitative emission data are reported for CO2, CO, NO, NO2, HONO, NH3, and 16 NMOGs (formaldehyde, methanol, acetonitrile, propene, acetaldehyde, formic acid, acetone plus its isomer propanal, acetic acid plus its isomer glycolaldehyde, furan, isoprene plus isomeric pentadienes and cyclopentene, methyl vinyl ketone plus its isomers crotonaldehyde and methacrolein, methylglyoxal, hydroxy acetone plus its isomers methyl acetate and propionic acid, benzene, 2,3-butanedione, and 2-furfural) with molar emission ratios relative to CO larger than 1 ppbV ppmV-1. Formaldehyde, acetaldehyde, 2-furfural, and methanol dominated NMOG emissions. No NMOGs with more than 10 carbon atoms were observed at mixing ratios larger than 50 pptV ppmV-1 CO. Downwind plume chemistry was investigated using the observations and a 0-D photochemical box model simulation. The model was run on a nearly explicit chemical mechanism (MCM v3.3) and initialized with measured emission data. Ozone formation during the first hour of atmospheric aging was well captured by the model, with carbonyls (formaldehyde, acetaldehyde, 2,3-butanedione, methylglyoxal, 2-furfural) in addition to CO and CH4 being the main drivers of peroxy radical chemistry. The model also accurately reproduced the sequestration of NOx into peroxyacetyl nitrate (PAN) and the OH-initiated degradation of furan and 2-furfural at an average OH concentration of 7.45 ± 1.07 × 106 cm-3 in the plume. Formaldehyde, acetone/propanal, acetic acid/glycolaldehyde, and maleic acid/maleic anhydride (tentatively identified) were found to be the main NMOGs to increase during 1 h of atmospheric plume processing, with the model being unable to capture the observed increase. A mass balance analysis suggests that about 50 % of the aerosol mass formed in the downwind plume is organic in nature.

In situ measurements and modeling of reactive trace gases in a small biomass burning plume

NASA Astrophysics Data System (ADS)

Müller, M.; Anderson, B.; Beyersdorf, A.; Crawford, J. H.; Diskin, G.; Eichler, P.; Fried, A.; Keutsch, F. N.; Mikoviny, T.; Thornhill, K. L.; Walega, J. G.; Weinheimer, A. J.; Yang, M.; Yokelson, R.; Wisthaler, A.

2015-11-01

An instrumented NASA P-3B aircraft was used for airborne sampling of trace gases in a plume that had emanated from a small forest understory fire in Georgia, USA. The plume was sampled at its origin for deriving emission factors and followed ~ 13.6 km downwind for observing chemical changes during the first hour of atmospheric aging. The P-3B payload included a proton-transfer-reaction time-of-flight mass spectrometer (PTR-ToF-MS), which measured non-methane organic gases (NMOGs) at unprecedented spatio-temporal resolution (10 m/0.1 s). Quantitative emission data are reported for CO2, CO, NO, NO2, HONO, NH3 and 16 NMOGs (formaldehyde, methanol, acetonitrile, propene, acetaldehyde, formic acid, acetone plus its isomer propanal, acetic acid plus its isomer glycolaldehyde, furan, isoprene plus isomeric pentadienes and cyclopentene, methyl vinyl ketone plus its isomers crotonaldehyde and methacrolein, methylglyoxal, hydroxy acetone plus its isomers methyl acetate and propionic acid, benzene, 2,3-butandione and 2-furfural) with molar emission ratios relative to CO larger than 1 ppbV ppmV-1. Formaldehyde, acetaldehyde, 2-furfural and methanol dominated NMOG emissions. No NMOGs with more than 10 carbon atoms were observed at mixing ratios larger than 50 ppbV ppmV-1 CO emitted. Downwind plume chemistry was investigated using the observations and a 0-D photochemical box model simulation. The model was run on a near-explicit chemical mechanism (MCM v3.3) and initialized with measured emission data. Ozone formation during the first hour of atmospheric aging was well captured by the model, with carbonyls (formaldehyde, acetaldehyde, 2,3-butanedione, methylglyoxal, 2-furfural) in addition to CO and CH4 being the main drivers of peroxy radical chemistry. The model also accurately reproduced the sequestration of NOx into PAN and the OH-initiated degradation of furan and 2-furfural at an average OH concentration of 7.45 ± 1.07 × 106 cm-3 in the plume. Formaldehyde, acetone/propanal, acetic acid/glycolaldehyde and maleic acid/maleic anhydride (tentatively identified) were found to be the main NMOGs to increase during one hour of atmospheric plume processing, with the model being unable to capture the observed increase. A mass balance analysis suggests that about 50 % of the aerosol mass formed in the downwind plume is organic in nature.

Chemical Kinetics of Hydrogen Atom Abstraction from Allylic Sites by 3O2; Implications for Combustion Modeling and Simulation.

PubMed

Zhou, Chong-Wen; Simmie, John M; Somers, Kieran P; Goldsmith, C Franklin; Curran, Henry J

2017-03-09

Hydrogen atom abstraction from allylic C-H bonds by molecular oxygen plays a very important role in determining the reactivity of fuel molecules having allylic hydrogen atoms. Rate constants for hydrogen atom abstraction by molecular oxygen from molecules with allylic sites have been calculated. A series of molecules with primary, secondary, tertiary, and super secondary allylic hydrogen atoms of alkene, furan, and alkylbenzene families are taken into consideration. Those molecules include propene, 2-butene, isobutene, 2-methylfuran, and toluene containing the primary allylic hydrogen atom; 1-butene, 1-pentene, 2-ethylfuran, ethylbenzene, and n-propylbenzene containing the secondary allylic hydrogen atom; 3-methyl-1-butene, 2-isopropylfuran, and isopropylbenzene containing tertiary allylic hydrogen atom; and 1-4-pentadiene containing super allylic secondary hydrogen atoms. The M06-2X/6-311++G(d,p) level of theory was used to optimize the geometries of all of the reactants, transition states, products and also the hinder rotation treatments for lower frequency modes. The G4 level of theory was used to calculate the electronic single point energies for those species to determine the 0 K barriers to reaction. Conventional transition state theory with Eckart tunnelling corrections was used to calculate the rate constants. The comparison between our calculated rate constants with the available experimental results from the literature shows good agreement for the reactions of propene and isobutene with molecular oxygen. The rate constant for toluene with O 2 is about an order magnitude slower than that experimentally derived from a comprehensive model proposed by Oehlschlaeger and coauthors. The results clearly indicate the need for a more detailed investigation of the combustion kinetics of toluene oxidation and its key pyrolysis and oxidation intermediates. Despite this, our computed barriers and rate constants retain an important internal consistency. Rate constants calculated in this work have also been used in predicting the reactivity of the target fuels of 1-butene, 2-butene, isobutene, 2-methylfuran, 2,5-dimethylfuran, and toluene, and the results show that the ignition delay times for those fuels have been increased by a factor of 1.5-3. This work provides a first systematic study of one of the key initiation reaction for compounds containing allylic hydrogen atoms.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Boyles, Kelly R.; Chajkowski, Sarah M.; Disselkamp, Robert S.

An H/D isotope effect study of the (H2 versus D2) hydrogenation of the aqueous substrates 3-buten-2-ol (3B2OL) and 1,4-pentadien-3-ol (14PD3OL) was performed using Pd-black catalyst. Either H2O or D2O solvents were employed (for alcohol H/D isotope substitution). Two experimental processing conditions of cavitating ultrasound (CUS) and stirred/silent (SS) methods were used. Products formed include 2-butanol and 2-butanone for the former, and 3-pentanol and 3-pentanone for the latter. The observed selectivity and pseudo-first order reaction rate coefficients (e.g., activity) to these products enabled a mechanistic interpretation of the various reaction conditions to be proposed. Experiments utilized a 50 mL batch reactormore » maintained at 298 K, employed 5.4 atm of H2 or D2 gas, while seven aliquots were collected during the course of the reaction. We have utilized 1-propanol as an inert dopant in all experiments to enable the rapid onset of cavitation in the CUS systems as described earlier [R.S. Disselkamp et al., J. Catal., 227, 552 (2004)]. The following conclusions were noted. First, the activity of the CUS compared to SS processing were ~100-fold larger. Second, variable catalyst loading experiments for stirred/silent D2 hydrogenation processing indicated that mass transfer of hydrogen gas to the Pd-surface played a role such that higher catalyst loading reduced surface D-atom concentrations and reduced saturated alcohol formation (e.g., via reduced H-addition to surface alkyl radicals). Third, for CUS processing the ketone selectivities for experiments employing water compared to D2O indicated that 3B2OL were twice as large, whereas for 14PD3OL they were comparable. This suggests, somewhat surprisingly, that for 3B2OL enol tautomerization to ketone is a slow, and possibly rate-controlling, process. Finally, again for CUS processing, the similarity in ketone selectivities (all ~17%) for H2 compared to D2 hydrogenation for both 3B2OL and 14PD3OL suggest that both H/D isotopes have rapid surface diffusion and hence give rise to nearly equal selectivies. Restated, the thermal or cavitating ultrasound activation is much greater than the surface H/D diffusion barrier.« less

I. Direct observation of zirconocene-catalyzed alkene polymerization via NMR and the role of an aluminum alkyl during polymerization. II. Design and evaluation of an online nanoscience course for teachers

NASA Astrophysics Data System (ADS)

Tomasik, Janice Hall

The plastics industry has been revolutionalized by development of group 4 metallocene polymerization catalysts. These catalysts have higher activities and stereoselectivities than traditional heterogeneous Ziegler-Natta polymerization catalysts, and produce polymers with narrower molecular weight distributions and with better control of the polymer stereochemistry. The reaction kinetics of catalytic alkene polymerizations are complicated and difficult to resolve macroscopically. To overcome these difficulties, research has used NMR spectroscopy to directly observe catalytic reaction intermediates; many advances in our understanding of the complex mechanisms behind these polymerization reactions have resulted. In this work, the direct observation of alkene insertion into zirconocene-polymeryls via NMR spectroscopy is presented. Alkenes studied are 3-methylpentene, styrene, and 1,4-pentadiene. Kinetic measurements are reported for the polymerization of 3-methylpentene by rac-(EBI)Zr(Me)(MeB(C6F 5)3) (EBI = C2H4(1-indenyl)2) and rac-(EBI)Zr(polyhexenyl)(MeB(C6F5) 3). Also presented are NMR spectroscopic characterizations of rac-(EBI)Zr(styrenyl)(MeB(C6F5)3) and rac-(EBI)Zr(1,4-pentadienyl)(MeB(C6F 5)3). In addition, NMR spectroscopy is used to directly monitor the behavior of an aluminum alkyl during the polymerization of 1-hexene by rac -(EBI)2Zr(Me)(MeB(C6F5)3). The rates of polymerization are not inhibited by Al(iBu) 2(BHT), Al(Me)(BHT)2, or Al(iBu)3 (BHT = 2,6-di- tert-butyl-4-methylphenyl). Detailed measurement of polymerization rate and catalyst speciation demonstrate that BHT modified aluminum alkyls protect active sites from decomposition in the presence of protic impurities such as methanol. Also presented in this work is the design and evaluation of an online course for teachers about nanoscience. Nanotechnology is an important emerging field that is estimated to need about 2 million workers worldwide by 2015. Therefore the educational system is being encouraged to incorporate major nanoscience concepts into curricula. In order to facilitate the integration of nanoscience, an online professional development course for teachers has been developed and offered at the University of Wisconsin-Madison. Evaluation results from the first three versions of the course indicate the online learning environment was very close to ideal. Comparisons of pre-instruction to post-instruction quiz responses indicate significant learning gains by participants. Importantly, survey results show the online course helped teachers to successfully incorporate nanoscience into their curricula.

Electrophilic Cleavage and Functionalization of Polyisobutylenes Bearing Unsaturations in the Backbone and Synthesis of Polymers for this Process

NASA Astrophysics Data System (ADS)

Campbell, Christopher Garrett

Polyisobutylene is a polymer of high commercial and academic interest due to its low cost of synthesis, high gas barrier properties, and high chemical and oxidative stability. Polyisobutylene (PIB) can only be synthesized by the cationic polymerization of isobutylene (IB). Commercial processes are currently only capable of producing monofunctional PIB or copolymers thereof. The living cationic polymerization of isobutylene is capable of producing difunctional telechelic PIB, but at the expense of difficultly or expensively synthesized initiators. Thus there exists a need for new synthetic routes for multifunctional PIBs, which can be adopted on a commercial scale. In the first project, we demonstrated a new reaction, which is a subset of the Friedel Crafts alkylation reaction, in which the alkylating carbocation undergoes a cleavage reaction prior to reaction with the aromatic substrate. This reaction was discovered by the observation that when a PIB containing a large amount of coupled fraction was subjected to a mixture of protic and Lewis acids (HCl/TiCl4) in the presence of an alkoxybenzene compound, the coupled fraction was quantitatively converted to its constituent monofunctional chains, which became functionalized by the alkoxybenzene. In the second project, a commercial polymer, poly(isobutylene- co-isoprene) (butyl rubber) was used as a substrate upon which the aforementioned electrophilic cleavage and functionalization reaction was performed. The goal of this project was to degrade a high molecular weight, main-chain olefin-containing copolymer of isobutylene into low molecular weight difunctional telechelic polyisobutylenes. This general process, though not necessarily proceeding by the aforementioned novel chemical reaction, has been described in the literature as "constructive degradation." Though we were unable to synthesize truly telechelic polyisobutylenes by this method, we were able to demonstrate this method as a viable route to low molecular weight multifunctional PIBs. In the third project, we attempted to synthesize a random copolymer, previously reported by Kennedy et al., of isobutylene and 2,4-dimethyl-1,3-pentadiene (DMPD). The interest in this copolymer was based on its structural similarity to the coupled PIB mentioned in the first project. However, we found that these two monomers are not well suited to the creation of random copolymers due to a large difference in reactivity ratios. The project presented in this chapter was then redirected toward the structural characterization of the products of attempted copolymerization and of the homo-polymerization of DMPD. In the fourth project, we investigated the copolymer of isobutylene and beta-pinene as a substrate for the aforementioned cleavage/functionalization reaction. We were able to synthesize high molecular weight copolymers of these two monomers via slurry polymerization catalyzed by either TiCl4 or ethylaluminum dichloride (EADC), and though the degradation and functionalization kinetics were much slower than for butyl rubber, we did observe a drastic decrease in molecular weight accompanied by functionalization of the polymer, thus proving this chemistry is applicable to copolymers of isobutylene other than butyl rubber.

Calculational and Experimental Investigations of the Pressure Effects on Radical - Radical Cross Combinations Reactions: C2H5 + C2H3

NASA Technical Reports Server (NTRS)

Fahr, Askar; Halpern, Joshua B.; Tardy, Dwight C.

2007-01-01

Pressure-dependent product yields have been experimentally determined for the cross-radical reaction C2H5 + C2H3. These results have been extended by calculations. It is shown that the chemically activated combination adduct, 1-C4H8*, is either stabilized by bimolecular collisions or subject to a variety of unimolecular reactions including cyclizations and decompositions. Therefore the "apparent" combination/disproportionation ratio exhibits a complex pressure dependence. The experimental studies were performed at 298 K and at selected pressures between about 4 Torr (0.5 kPa) and 760 Torr (101 kPa). Ethyl and vinyl radicals were simultaneously produced by 193 nm excimer laser photolysis of C2H5COC2H3 or photolysis of C2H3Br and C2H5COC2H5. Gas chromatograph/mass spectrometry/flame ionization detection (GC/MS/FID) were used to identify and quantify the final reaction products. The major combination reactions at pressures between 500 (66.5 kPa) and 760 Torr are (1c) C2H5 + C2H3 yields 1-butene, (2c) C2H5 + C2H5 yields n-butane, and (3c) C2H3 + C2H3 yields 1,3-butadiene. The major products of the disproportionation reactions are ethane, ethylene, and acetylene. At moderate and lower pressures, secondary products, including propene, propane, isobutene, 2-butene (cis and trans), 1-pentene, 1,4-pentadiene, and 1,5-hexadiene are also observed. Two isomers of C4H6, cyclobutene and/or 1,2-butadiene, were also among the likely products. The pressure-dependent yield of the cross-combination product, 1-butene, was compared to the yield of n-butane, the combination product of reaction (2c), which was found to be independent of pressure over the range of this study. The [ 1-C4H8]/[C4H10] ratio was reduced from approx.1.2 at 760 Torr (101 kPa) to approx.0.5 at 100 Torr (13.3 kPa) and approx.0.1 at pressures lower than about 5 Torr (approx.0.7 kPa). Electronic structure and RRKM calculations were used to simulate both unimolecular and bimolecular processes. The relative importance of C-C and C-H bond ruptures, cyclization, decyclization, and complex decompositions are discussed in terms of energetics and structural properties. The pressure dependence of the product yields were computed and dominant reaction paths in this chemically activated system were determined. Both modeling and experiment suggest that the observed pressure dependence of [1-C4H8]/[C4H10] is due to decomposition of the chemically activated combination adduct 1-C4H8* in which the weaker allylic C-C bond is broken: H2C=CHCH2CH3 yields C3H5 + CH3. This reaction occurs even at moderate pressures of approx.200 Torr (26 kPa) and becomes more significant at lower pressures. The additional products detected at lower pressures are formed from secondary radical-radical reactions involving allyl, methyl, ethyl, and vinyl radicals. The modeling studies have extended the predictions of product distributions to different temperatures (200-700 K) and a wider range of pressures (10(exp -3) - 10(exp 5) Torr). These calculations indicate that the high-pressure [1-C4H8]/[C4H10] yield ratio is 1.3 +/- 0.1.

Synthesis, Characterization, and Crystallization of Syndiotactic Alternating Ethylene-Propylene Crystalline Copolymer and its Blends.

NASA Astrophysics Data System (ADS)

Chien, Haoyang

A syndiotactic alternating ethylene-propylene (SYN-ALT-EP) crystalline copolymer was synthesized by complete hydrogenation, using a diimide reduction, of syndiotactic cis-1,4-poly(pentadiene-1,3) (CIS-PPD). The microstructure was studied by both high resolution nuclear magnetic resonance (NMR) spectroscopy and also fourier transform infra-red (FTIR) spectroscopy. The number average length of syndiotactic sequences is about 69 which indicates a high degree of syndiotacticity (97%) in the microstructure of this copolymer. The single FTIR absorbance at 733 cm^{ -1} without any splitting suggests an alternating arrangement of ethylene and propylene units. The solution state characterization of SYN-ALT -EP was studied by gel permeation chromatography using on -line measurements of multi-angle laser light scattering (MALLS), single capillary viscosities (VISC), and concentrations by differential refractive index (DRI) detectors. The Mark-Houwink-Sakurada parameters of "K" and "a" in THF at 30^circC are determined to be 8.99 times 10^ {-5} and 0.8, respectively. The universal GPC calibration curve can be applied to this copolymer in THF at 30^circC. Two different molecular relaxation processes ( alpha and beta relaxations) were found via dynamic mechanical (DM) analysis below room temperature: an alpha relaxation (around -60^ circC) and a beta relaxation (around -125^circ C). The apparent activation energy of the alpha relaxation is 285 kJ/mol, and the activation energy of the beta relaxation is 43 kJ/mol based on the Arrhenius equation. Molecular motion in SYN-ALT-EP copolymer was probed by solid state ^{13}C NMR experiments. At temperatures above T_{rm g} there are two major molecular motions in this copolymer: a backbone motion (the rotational motion about single bonds) and a methyl side group rotation. The backbone motion is frozen below T_{rm g}, but the methyl rotation still occurs. As the temperature is further decreased to about -175 ^circC, well below the beta -transition observed in DM analysis, the methyl side group rotation slows down, suggesting that the methyl rotation may be associated with the observed beta relaxation process. The equilibrium melting temperature is 55 +/- 1^circC; the equilibrium heat of fusion is 8.8 +/- 0.3 kJ/mol. The overall crystallization kinetics show an Avrami exponent (n) that qualitatively increases with crystallization temperature during primary crystallization. The transition from Regime II to Regime III is observed near T_{rm c} = 26 ^circC based on linear crystal growth rate experiments. The fold surface free energy ( sigma_{rm e}) is determined to be 33 erg/cm^2. A monoclinic crystal unit cell was determined (a = 11.19A b = 11.82A c = 9.00A gamma = 67.03^circ) from the fiber pattern via wide angle x-ray diffraction experiments (WAXD). A banded spherulitic morphology was observed by polarized light microscopy (PLM) and transmission electron microscopy (TEM). Such texture is characteristic of the co-twisting of growing lamellae. The morphology changes from regularly banded spherulites to non-regularly banded spherulites and may be correlated with the Regime III to Regime II transition. A plate-like single crystal morphology was also observed by polarized light microscopy after a melt crystallization at small supercooling conditions. Blends of SYN-ALT-EP/IPP, SYN-ALT-EP/HDPE, and SYN-ALT-EP/LDPE were made and examined. Neither T _{rm g} shifting nor co-crystallization using different blending compositions were observed. Therefore, only limited, if any, miscibility exists in these blends.

NTP toxicology and carcinogensis Studies of 2,4-hexadienal (89% trans,trans isomer, CAS No. 142-83-6; 11% cis,trans isomer) (Gavage Studies).

PubMed

2003-10-01

2,4-Hexadienal, a colorless to yellow liquid with a pungent "green" or citrus odor, is used as a food additive for flavor enhancement, as a fragrance agent, as a starting material or intermediate in synthetic reactions in the chemical and pharmaceutical industries, as a fumigant, and as a corrosion inhibitor for steel. 2,4-Hexadienal was nominated for study by the National Cancer Institute because of the potential for carcinogenicity based on its alpha,beta-unsaturated aldehyde structure and the potential link between exposure to lipid peroxidation products in the diet and human malignancies. The commercial product is a mixture containing chiefly trans,trans-2,4-hexadienal in equilibrium with cis,trans-2,4-hexadienal. Male and female F344/N rats and B6C3F1 mice received 2,4-hexadienal (89% trans,trans; 11% cis,trans) in corn oil by gavage for 16 days, 14 weeks, or 2 years. Tissues and plasma from dosed rats were examined for malondialdehyde and glutathione concentrations, and DNA adducts were characterized in liver and forestomach samples from dosed rats and mice. Genetic toxicology studies were conducted in Salmonella typhimurium, rat and mouse bone marrow cells, and mouse peripheral blood erythrocytes. 16-DAY STUDY IN RATS: Groups of five male and five female rats were administered 0, 3, 9, 27, 80, or 240 mg 2,4-hexadienal/kg body weight in corn oil by gavage, 5 days per week, for 16 days. Three male and three female 240 mg/kg rats died before the end of the study. Mean body weight gains of 240 mg/kg rats were significantly less than those of the vehicle controls. Clinical findings included diarrhea, ataxia, lethargy, and nasal/eye discharge in males, and lethargy, paleness, and abnormal breathing in females in the 240 mg/kg groups. Liver weights of 240 mg/kg females were significantly greater than those of the vehicle controls. Gross and microscopic lesions indicative of forestomach necrosis and ulceration were present in most 240 mg/kg rats, and forestomach epithelial hyperplasia was microscopically evident in most 80 mg/kg rats. 16-DAY STUDY IN MICE: Groups of five male and five female mice were administered 2,4-hexadienal in corn oil by gavage at doses of 0, 3, 9, 27, 80, or 240 mg/kg, 5 days per week, for 16 days. Chemical-related deaths occurred in one male and one female in the 240 mg/kg groups. Female mice in the 240 mg/kg group lost weight during the study. Gross and microscopic lesions indicative of forestomach necrosis and ulceration were present in all 240 mg/kg mice, and forestomach epithelial hyperplasia and hyperkeratosis were microscopically evident in 80 mg/kg mice. 14-WEEK STUDY IN RATS: Groups of 10 male and 10 female rats were administered 2,4-hexadienal in corn oil by gavage at doses of 0, 7.5, 15, 30, 60, or 120 mg/kg, 5 days per week, for 14 weeks. All rats survived to the end of the study. Mean body weights of 30, 60, and 120 mg/kg males were significantly less than those of the vehicle controls. The only clinical finding attributed to 2,4-hexadienal administration was hypersalivation in 30 and 120 mg/kg males and females. The incidences of forestomach hyperplasia and nasal olfactory atrophy or necrosis were significantly increased in 120 mg/kg rats. Nasal lesions occurred in most 120 mg/kg male rats. 14-WEEK STUDY IN MICE: Groups of 10 male and 10 female mice were administered 2,4-hexadienal in corn oil by gavage at doses of 0, 7.5, 15, 30, 60, or 120 mg/kg, 5 days per week, for 14 weeks. No deaths were attributed to administration of 2,4-hexadienal. Mean body weights of males and females were similar to those of the vehicle controls throughout the study. Clinical findings included salivation and anal wetness in males and females. Kidney weights of 60 and 120 mg/kg males and liver weights of 60 mg/kg males and females were significantly greater than those of the vehicle controls. The incidences of forestomach hyperplasia and/or nasal olfactory atrophy or necrosis were significantly increased in 120 mg/kg mice. 2-YEAR STUDY IN RATS: Groups of 50 male and 50 female rats were administered 2,4-hexministered 2,4-hexadienal in corn oil by gavage at doses of 0, 22.5, 45, or 90 mg/kg, 5 days per week, for up to 105 weeks. Survival of all dosed groups of rats was similar to that of the vehicle control groups. The mean body weights of 90 mg/kg males were generally less than those of the vehicle controls throughout the study. The incidences of squamous cell papilloma of the forestomach occurred with positive trends in male and female rats. This neoplasm was found in 58% of males and 34% of females in the 90 mg/kg groups. In the forestomach of male rats, papilloma multiplicity was increased in the 90 mg/kg group, and squamous cell carcinomas were found in one 45 mg/kg male and two 90 mg/kg males. Epithelial hyperplasia of the forestomach occurred in most 45 and 90 mg/kg rats. 2-YEAR STUDY IN MICE: Groups of 50 male and 50 female mice were administered 2,4-hexadienal in corn oil by gavage at doses of 0, 30, 60, or 120 mg/kg, 5 days per week, for up to 105 weeks. Survival of dosed mice was similar to that of the vehicle controls. The mean body weights of all dosed groups were generally similar to those of the vehicle controls throughout the study. The incidences of squamous cell papilloma of the forestomach occurred with positive trends in male and female mice; squamous cell carcinomas were present in 120 mg/kg males and females. Epithelial hyperplasia of the forestomach occurred in many 120 mg/kg mice. Two 120 mg/kg males had uncommon squamous cell carcinoma of the oral cavity (tongue). 2,4-Hexadienal was mutagenic in S. typhimurium strain TA100 with and without induced hamster or rat liver enzymes; no mutagenic activity was detected with strains TA1535 or TA98, with or without S9. Results of bone marrow tests in male rats and male mice given intraperitoneal injections of 2,4-hexadienal showed a small increase in the induction of micronucleated erythrocytes. However, neither test was repeated, and the test results were judged to be inconclusive. Results of peripheral blood micronucleus tests in male and female mice treated with 2,4-hexadienal by gavage for 14 weeks were negative. Under the conditions of these 2-year gavage studies, there was clear evidence of carcinogenic activity* of 2,4-hexadienal in male and female F344/N rats and male and female B6C3F1 mice based on increased incidences of squamous cell neoplasms of the forestomach. The occurrence of squamous cell carcinoma of the oral cavity (tongue) in male B6C3F1 mice may have been related to the administration of 2,4-hexadienal. Hyperplasia of the forestomach in male and female rats and mice was associated with administration of 2,4-hexadienal. Synonyms: Hexa-2,4-dienal; 2,4-hexadienal; 2,4-hexadien-1-al; 2,4-Hx; 1,3-pentadiene-1-carboxaldehyde; 2-propylene acrolein; sorbaldehyde; sorbic aldehyde