The 30-centimeter ion thrust subsystem design manual

NASA Technical Reports Server (NTRS)

1979-01-01

The principal characteristics of the 30-centimeter ion propulsion thrust subsystem technology that was developed to satisfy the propulsion needs of future planetary and early orbital missions are described. Functional requirements and descriptions, interface and performance requirements, and physical characteristics of the hardware are described at the thrust subsystem, BIMOD engine system, and component level.

Meeting the Needs of Students with Coexisting Visual Impairments and Learning Disabilities

ERIC Educational Resources Information Center

Jones, Beth A.; Hensley-Maloney, Lauren

2015-01-01

The coexistence of visual impairments and learning disabilities presents unique challenges. It is imperative that teachers be apprised of the characteristics of this population as well as instructional strategies targeted at meeting their unique needs. The authors highlight typical patterns of performance and provide suggestions for effective…

Work schedule manager gap analysis : assessing the future training needs of work schedule managers using a strategic job analysis approach.

DOT National Transportation Integrated Search

2010-05-01

This report documents the results of a strategic job analysis that examined the job tasks and knowledge, skills, abilities, and other characteristics (KSAOs) needed to perform the job of a work schedule manager. The strategic job analysis compared in...

Work schedule manager gap analysis : assessing the future training needs of work schedule managers using a strategic job analysis approach

DOT National Transportation Integrated Search

2010-05-01

This report documents the results of a strategic job analysis that examined the job tasks and knowledge, skills, abilities, and other characteristics (KSAOs) needed to perform the job of a work schedule manager. The strategic job analysis compared in...

Pacing and Self-regulation: Important Skills for Talent Development in Endurance Sports.

PubMed

Elferink-Gemser, Marije T; Hettinga, Florentina J

2017-07-01

Pacing has been characterized as a multifaceted goal-directed process of decision making in which athletes need to decide how and when to invest their energy during the race, a process essential for optimal performance. Both physiological and psychological characteristics associated with adequate pacing and performance are known to develop with age. Consequently, the multifaceted skill of pacing might be under construction throughout adolescence, as well. Therefore, the authors propose that the complex skill of pacing is a potential important performance characteristic for talented youth athletes that needs to be developed throughout adolescence. To explore whether pacing is a marker for talent and how talented athletes develop this skill in middle-distance and endurance sports, they aim to bring together literature on pacing and literature on talent development and self-regulation of learning. Subsequently, by applying the cyclical process of self-regulation to pacing, they propose a practical model for the development of performance in endurance sports in youth athletes. Not only is self-regulation essential throughout the process of reaching the long-term goal of athletic excellence, but it also seems crucial for the development of pacing skills within a race and the development of a refined performance template based on previous experiences. Coaches and trainers are advised to incorporate pacing as a performance characteristic in their talent-development programs by stimulating their athletes to reflect, plan, monitor, and evaluate their races on a regular basis to build performance templates and, as such, improve their performance.

Correlation of water vapor adsorption behavior of wood with surface thermodynamic properties

Treesearch

Mandla A. Tshabalala; Agnes R. Denes; R. Sam Williams

1999-01-01

To improve the overall performance of wood-plastic composites, appropriate technologies are needed to control moisture sorption and to improve the interaction of wood fiber with selected hydrophobic matrices. The objective of this study was to determine the surface thermodynamic characteristics of a wood fiber and to correlate those characteristics with the fiberas...

Performance Characteristic Mems-Based IMUs for UAVs Navigation

NASA Astrophysics Data System (ADS)

Mohamed, H. A.; Hansen, J. M.; Elhabiby, M. M.; El-Sheimy, N.; Sesay, A. B.

2015-08-01

Accurate 3D reconstruction has become essential for non-traditional mapping applications such as urban planning, mining industry, environmental monitoring, navigation, surveillance, pipeline inspection, infrastructure monitoring, landslide hazard analysis, indoor localization, and military simulation. The needs of these applications cannot be satisfied by traditional mapping, which is based on dedicated data acquisition systems designed for mapping purposes. Recent advances in hardware and software development have made it possible to conduct accurate 3D mapping without using costly and high-end data acquisition systems. Low-cost digital cameras, laser scanners, and navigation systems can provide accurate mapping if they are properly integrated at the hardware and software levels. Unmanned Aerial Vehicles (UAVs) are emerging as a mobile mapping platform that can provide additional economical and practical advantages. However, such economical and practical requirements need navigation systems that can provide uninterrupted navigation solution. Hence, testing the performance characteristics of Micro-Electro-Mechanical Systems (MEMS) or low cost navigation sensors for various UAV applications is important research. This work focuses on studying the performance characteristics under different manoeuvres using inertial measurements integrated with single point positioning, Real-Time-Kinematic (RTK), and additional navigational aiding sensors. Furthermore, the performance of the inertial sensors is tested during Global Positioning System (GPS) signal outage.

Strategic Planning for Employee Happiness: A Business Goal for Human Service Organizations.

ERIC Educational Resources Information Center

Howard, Beth; Gould, Karen E.

2000-01-01

This paper reviews evidence that employee happiness can substantially affect an organization's performance by influencing employee retention, absenteeism, and work performance. It reviews the workforce and environmental characteristics involved in planning for employee happiness and the steps needed to create an organizational culture in which…

Force control compensation method with variable load stiffness and damping of the hydraulic drive unit force control system

NASA Astrophysics Data System (ADS)

Kong, Xiangdong; Ba, Kaixian; Yu, Bin; Cao, Yuan; Zhu, Qixin; Zhao, Hualong

2016-05-01

Each joint of hydraulic drive quadruped robot is driven by the hydraulic drive unit (HDU), and the contacting between the robot foot end and the ground is complex and variable, which increases the difficulty of force control inevitably. In the recent years, although many scholars researched some control methods such as disturbance rejection control, parameter self-adaptive control, impedance control and so on, to improve the force control performance of HDU, the robustness of the force control still needs improving. Therefore, how to simulate the complex and variable load characteristics of the environment structure and how to ensure HDU having excellent force control performance with the complex and variable load characteristics are key issues to be solved in this paper. The force control system mathematic model of HDU is established by the mechanism modeling method, and the theoretical models of a novel force control compensation method and a load characteristics simulation method under different environment structures are derived, considering the dynamic characteristics of the load stiffness and the load damping under different environment structures. Then, simulation effects of the variable load stiffness and load damping under the step and sinusoidal load force are analyzed experimentally on the HDU force control performance test platform, which provides the foundation for the force control compensation experiment research. In addition, the optimized PID control parameters are designed to make the HDU have better force control performance with suitable load stiffness and load damping, under which the force control compensation method is introduced, and the robustness of the force control system with several constant load characteristics and the variable load characteristics respectively are comparatively analyzed by experiment. The research results indicate that if the load characteristics are known, the force control compensation method presented in this paper has positive compensation effects on the load characteristics variation, i.e., this method decreases the effects of the load characteristics variation on the force control performance and enhances the force control system robustness with the constant PID parameters, thereby, the online PID parameters tuning control method which is complex needs not be adopted. All the above research provides theoretical and experimental foundation for the force control method of the quadruped robot joints with high robustness.

On Choosing a Rational Flight Trajectory to the Moon

NASA Astrophysics Data System (ADS)

Gordienko, E. S.; Khudorozhkov, P. A.

2017-12-01

The algorithm for choosing a trajectory of spacecraft flight to the Moon is discussed. The characteristic velocity values needed for correcting the flight trajectory and a braking maneuver are estimated using the Monte Carlo method. The profile of insertion and flight to a near-circular polar orbit with an altitude of 100 km of an artificial lunar satellite (ALS) is given. The case of two corrections applied during the flight and braking phases is considered. The flight to an ALS orbit is modeled in the geocentric geoequatorial nonrotating coordinate system with the influence of perturbations from the Earth, the Sun, and the Moon factored in. The characteristic correction costs corresponding to corrections performed at different time points are examined. Insertion phase errors, the errors of performing the needed corrections, and the errors of determining the flight trajectory parameters are taken into account.

Aerodynamic Performance of Hand Launch Glider

NASA Astrophysics Data System (ADS)

Koike, Masaru; Ishii, Mitsuru

In recent years Micro Air Vehicles (MAV) for disaster aerial video are developed vigorously. In order to improve aerodynamic performance of MAV wing performance in low Reynolds numbers (Re) need to be improved, but research on the theme are very rare. In category of Hand Launch Glider, a kind of model aircraft, glide performance are competed, as a result high performance airfoils in Re is around 20,000 are developed. Therefore for MAV's aerodynamic performance improvement airfoils of Hand Launch Gliders should be referred and aerodynamic characteristics of the airfoils desired to be studied. So in this research, aerodynamic characteristics of the gliders are measured in wind tunnel. And also consistency between wind tunnel test and glide test in calm air is examined to confirm reliability of wind tunnel test. Comparison of different airfoils and flow visualization are also performed.

The Assistant for Specifying the Quality Software (ASQS) Operational Concept Document. Volume 1

DTIC Science & Technology

1990-09-01

Assistant in which the manager supplies system-specific characteristics and needs and the Assistant fills in the software quality concepts and methods. The...member(s) of the Computer Resources Working Group (CRWG) to aid in performing a software quality engineering study. Figure 3.4-1 outlines the...need to recovery from faults more likely than need _o provide alternative functions or interfaces), and more on Autcncmy - 27 - that Modularity

Covariance of engineering management characteristics with engineering employee performance

NASA Astrophysics Data System (ADS)

Hesketh, Andrew Arthur

1998-12-01

As business in the 1990's grapples with the impact of continuous improvement and quality to meet market demands, there is an increased need to improve the leadership capabilities of our managers. Engineers have indicated desire for certain managerial characteristics in their leadership but there have been no studies completed that approached the problem of determining what managerial characteristics were best at improving employee performance. This study addressed the idea of identifying certain managerial characteristics that enhance employee performance. In the early 1990's, McDonnell Douglas Aerospace in St. Louis used a forced distribution system and allocated 35% of its employees into a "exceeds expectations" category and 60% into a "meets expectations" category. A twenty-question 5 point Likert scale survey on managerial capabilities was administered to a sample engineering population that also obtained their "expectations" category. A single factor ANOVA on the survey results determined a statistical difference between the "exceeds" and "meets" employees with four of the managerial capability questions. The "exceeds expectations" employee indicated that supervision did a better job of supporting subordinate development, clearly communicating performance expectations, and providing timely performance feedback when compared to the "meets expectations" employee. The "meets expectations" employee felt that their opinions, when different from their supervisor's, were more often ignored when compared to the "exceeds expectations" employee. These four questions relate to two specific managerial characteristics, "gaining (informal) authority and support" or "control" characteristic and "providing assistance and guidance" or "command" characteristic, that can be emphasized in managerial training programs.

Altered spatiotemporal characteristics of gait in older adults with chronic low back pain.

PubMed

Hicks, Gregory E; Sions, J Megan; Coyle, Peter C; Pohlig, Ryan T

2017-06-01

Previous studies in older adults have identified that chronic low back pain (CLBP) is associated with slower gait speed. Given that slower gait speed is a predictor of greater morbidity and mortality among older adults, it is important to understand the underlying spatiotemporal characteristics of gait among older adults with CLBP. The purposes of this study were to determine (1) if there are differences in spatiotemporal parameters of gait between older adults with and without CLBP during self-selected and fast walking and (2) whether any of these gait characteristics are correlated with performance of a challenging walking task, e.g. stair negotiation. Spatiotemporal characteristics of gait were evaluated using a computerized walkway in 54 community-dwelling older adults with CLBP and 54 age- and sex-matched healthy controls. Older adults with CLBP walked slower than their pain-free peers during self-selected and fast walking. After controlling for body mass index and gait speed, step width was significantly greater in the CLBP group during the fast walking condition. Within the CLBP group, step width and double limb support time are significantly correlated with stair ascent/descent times. From a clinical perspective, these gait characteristics, which may be indicative of balance performance, may need to be addressed to improve overall gait speed, as well as stair-climbing performance. Future longitudinal studies confirming our findings are needed, as well as investigations focused on developing interventions to improve gait speed and decrease subsequent risk of mobility decline. Copyright © 2017 Elsevier B.V. All rights reserved.

What predicts performance in ultra-triathlon races? – a comparison between Ironman distance triathlon and ultra-triathlon

PubMed Central

Knechtle, Beat; Zingg, Matthias Alexander; Rosemann, Thomas; Stiefel, Michael; Rüst, Christoph Alexander

2015-01-01

Objective This narrative review summarizes recent intentions to find potential predictor variables for ultra-triathlon race performance (ie, triathlon races longer than the Ironman distance covering 3.8 km swimming, 180 km cycling, and 42.195 km running). Results from studies on ultra-triathletes were compared to results on studies on Ironman triathletes. Methods A literature search was performed in PubMed using the terms “ultra”, “triathlon”, and “performance” for the aspects of “ultra-triathlon”, and “Ironman”, “triathlon”, and “performance” for the aspects of “Ironman triathlon”. All resulting papers were searched for related citations. Results for ultra-triathlons were compared to results for Ironman-distance triathlons to find potential differences. Results Athletes competing in Ironman and ultra-triathlon differed in anthropometric and training characteristics, where both Ironmen and ultra-triathletes profited from low body fat, but ultra-triathletes relied more on training volume, whereas speed during training was related to Ironman race time. The most important predictive variables for a fast race time in an ultra-triathlon from Double Iron (ie, 7.6 km swimming, 360 km cycling, and 84.4 km running) and longer were male sex, low body fat, age of 35–40 years, extensive previous experience, a fast time in cycling and running but not in swimming, and origins in Central Europe. Conclusion Any athlete intending to compete in an ultra-triathlon should be aware that low body fat and high training volumes are highly predictive for overall race time. Little is known about the physiological characteristics of these athletes and about female ultra-triathletes. Future studies need to investigate anthropometric and training characteristics of female ultra-triathletes and what motivates women to compete in these races. Future studies need to correlate physiological characteristics such as maximum oxygen uptake (VO2max) with ultra-triathlon race performance in order to investigate whether these characteristics are also predictive for ultra-triathlon race performance. PMID:26056498

Improving stability and curving passing performance for railway vehicles with a variable stiffness MRF rubber joint

NASA Astrophysics Data System (ADS)

Harris, B. J.; Sun, S. S.; Li, W. H.

2017-03-01

With the growing need for effective intercity transport, the need for more advanced rail vehicle technology has never been greater. The conflicting primary longitudinal suspension requirements of high speed stability and curving performance limit the development of rail vehicle technology. This paper presents a novel magnetorheological fluid based joint with variable stiffness characteristics for the purpose of overcoming this parameter conflict. Firstly, the joint design and working principle is developed. Following this, a prototype is tested by MTS to characterize its variable stiffness properties under a range of conditions. Lastly, the performance of the proposed MRF rubber joint with regard to improving train stability and curving performance is numerically evaluated.

Effects of ruminally degradable N in diets containing wet corn distiller's grains and steam-flaked corn on feedlot cattle performance and carcass characteristics

USDA-ARS?s Scientific Manuscript database

Assessment of degradable nitrogen (N) needs in diets containing wet corn distiller's grains with solubles (WCDGS) is needed to aid the cattle feeding industry in managing feed costs and potential environmental issues. Yearling steers (n = 525; initial weight = 822 +/- 28 lb) were housed in 56 pens (...

Investigation of High-alpha Lateral-directional Control Power Requirements for High-performance Aircraft

NASA Technical Reports Server (NTRS)

Foster, John V.; Ross, Holly M.; Ashley, Patrick A.

1993-01-01

Designers of the next-generation fighter and attack airplanes are faced with the requirements of good high-angle-of-attack maneuverability as well as efficient high speed cruise capability with low radar cross section (RCS) characteristics. As a result, they are challenged with the task of making critical design trades to achieve the desired levels of maneuverability and performance. This task has highlighted the need for comprehensive, flight-validated lateral-directional control power design guidelines for high angles of attack. A joint NASA/U.S. Navy study has been initiated to address this need and to investigate the complex flight dynamics characteristics and controls requirements for high-angle-of-attack lateral-directional maneuvering. A multi-year research program is underway which includes ground-based piloted simulation and flight validation. This paper will give a status update of this program that will include a program overview, description of test methodology and preliminary results.

Investigation of high-alpha lateral-directional control power requirements for high-performance aircraft

NASA Technical Reports Server (NTRS)

Foster, John V.; Ross, Holly M.; Ashley, Patrick A.

1993-01-01

Designers of the next-generation fighter and attack airplanes are faced with the requirements of good high angle-of-attack maneuverability as well as efficient high speed cruise capability with low radar cross section (RCS) characteristics. As a result, they are challenged with the task of making critical design trades to achieve the desired levels of maneuverability and performance. This task has highlighted the need for comprehensive, flight-validated lateral-directional control power design guidelines for high angles of attack. A joint NASA/U.S. Navy study has been initiated to address this need and to investigate the complex flight dynamics characteristics and controls requirements for high angle-of-attack lateral-directional maneuvering. A multi-year research program is underway which includes groundbased piloted simulation and flight validation. This paper will give a status update of this program that will include a program overview, description of test methodology and preliminary results.

LANDING QUALITY IN ARTISTIC GYMNASTICS IS RELATED TO LANDING SYMMETRY

PubMed Central

Marinšek, M.

2013-01-01

In gymnastics every exercise finishes with a landing. The quality of landing depends on subjective (e.g. biomechanical) and objective (e.g. mechanical characteristics of landing area) factors. The aim of our research was to determine which biomechanical (temporal, kinematic and dynamic) characteristics of landing best predict the quality of landing. Twelve male gymnasts performed a stretched forward and backward salto; also with 1/2, 1/1 and 3/2 turns. Stepwise multiple regression extracted five predictors which explained 51.5% of landing quality variance. All predictors were defining asymmetries between legs (velocities, angles). To avoid asymmetric landings, gymnasts need to develop enough height; they need higher angular momentum around the transverse and longitudinal axis and they need to better control angular velocity in the longitudinal axis. PMID:24744462

Factors related to performance effectiveness of dental nurse in primary care unit in the northeastern part of Thailand.

PubMed

Wijaranaphiti, Saowaluk; Krugkrunjit, Peera; Intaraprasong, Bhusita

2009-12-01

To investigate the relationships between job characteristics, motivation, role stress and performance effectiveness of dental nurses in primary care units in the northeastern part of Thailand. A explanatory cross-sectional study was conducted in 326 dental nurses who were working in 310 PCUs of 19 provinces, 220 amphurs in the northeastern part of Thailand were taken as the study samples. Data were collected by using questionnaires. Pearson's Product Moment Correlation was applied to test between job characteristic model, motivation, role stress and performance effectiveness. The analysis showed that there was no relationship between job characteristics model and performance effectiveness as performing dental task needed 'dealing with others' and 'task significance'. There was a positive relationship between motivation and performance effectiveness at a low level. Role stress was not related to performance effectiveness; however, when the dental nurse had more stress caused by role conflict internal standard, several roles and their performance effectiveness was reduced. From the research result, it is necessary to help construct networks of dental tasks and other public health tasks in obvious forms, for some feedback from agents. Work allocation should be precisely arranged and professional skill should be determined responsibility. Lastly, recruiting dental nurses with proper characteristics in primary care units in the northeastern part of Thailand is crucial as well.

Shuttle derived vehicle analysis solid booster unmanned launch vehicle concept definition study, volume 2

NASA Technical Reports Server (NTRS)

1983-01-01

The technical effort associated with the selection and definition of the recommended SRB-X concept is documented. Included are discussions concerning the trades leading to the selected concept, the analysis that established the concept's basic subsystem characteristics, selected configuration description and performance capabilities, launch site operations and facility needs, development schedule, cost characteristics, risk assessment, and a cursory comparison with other launch systems.

5 CFR 575.102 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Administrative Personnel OFFICE OF PERSONNEL MANAGEMENT CIVIL SERVICE REGULATIONS RECRUITMENT, RELOCATION, AND... knowledge, skills, abilities, behaviors, and other characteristics an individual needs to perform the duties... following: (i) A time-limited appointment in the competitive or excepted service; (ii) A non-permanent...

Does Contraceptive Use in the United States Meet Global Goals?

PubMed

Frederiksen, Brittni N; Ahrens, Katherine A; Moskosky, Susan; Gavin, Loretta

2017-12-01

The United Nations Sustainable Development Goals (SDGs) seek to achieve health equity, and they apply to all countries. SDG contraceptive use estimates for the United States are needed to contextualize U.S. performance in relation to that of other countries. Data from the 2011-2013 and 2013-2015 waves of the National Survey of Family Growth were used to calculate three SDG indicators of contraceptive use for U.S. women aged 15-44: contraceptive prevalence, unmet need for family planning and demand for family planning satisfied by modern methods. These measures were calculated separately for married or cohabiting women and for unmarried, sexually active women; differences by sociodemographic characteristics were assessed using t tests from logistic regression analysis. Estimates for married women were compared with 2010-2015 estimates from 94 other countries, most of which were low- or middle-income. For married or cohabiting women, U.S. estimates for contraceptive prevalence, unmet need and demand satisfied by modern methods were 74%, 9% and 80%, respectively; for unmarried, sexually active women, they were 85%, 11% and 82%, respectively. Estimates varied by sociodemographic characteristics, particularly among married or cohabiting women. Five countries performed better than the United States on contraceptive prevalence, 12 on unmet need and four on both measures; seven performed better on demand satisfied by modern methods. There is a need to continue efforts to expand access to contraceptive care in the United States, and to monitor the SDG indicators so that improvement can be tracked over time. Copyright © 2017 by the Guttmacher Institute.

SELECTION OF ENDOCRINOLOGY SUBSPECIALTY TRAINEES: WHICH APPLICANT CHARACTERISTICS ARE ASSOCIATED WITH PERFORMANCE DURING FELLOWSHIP TRAINING?

PubMed

Natt, Neena; Chang, Alice Y; Berbari, Elie F; Kennel, Kurt A; Kearns, Ann E

2016-01-01

To determine which residency characteristics are associated with performance during endocrinology fellowship training as measured by competency-based faculty evaluation scores and faculty global ratings of trainee performance. We performed a retrospective review of interview applications from endocrinology fellows who graduated from a single academic institution between 2006 and 2013. Performance measures included competency-based faculty evaluation scores and faculty global ratings. The association between applicant characteristics and measures of performance during fellowship was examined by linear regression. The presence of a laudatory comparative statement in the residency program director's letter of recommendation (LoR) or experience as a chief resident was significantly associated with competency-based faculty evaluation scores (β = 0.22, P = .001; and β = 0.24, P = .009, respectively) and faculty global ratings (β = 0.85, P = .006; and β = 0.96, P = .015, respectively). The presence of a laudatory comparative statement in the residency program director's LoR or experience as a chief resident were significantly associated with overall performance during subspecialty fellowship training. Future studies are needed in other cohorts to determine the broader implications of these findings in the application and selection process.

Impact of pozzolanic binder addition on stabilization of polluted dredged sediments on its potential reuse as a new material resource for road construction in Basse Normandie, France

NASA Astrophysics Data System (ADS)

Silitonga, E.

2018-02-01

Due to the increase of the amount of marine dredged sediments (MDS) and the cost of managing the disposal site is very high, a reutilization of dredged sediment is urgently needed in France. The primary goal of this research is to find a domain for reuse of MDS materials as a new material regarding the environmental issues, and other requirement needed. In this study, the MDS was used as replacement material in road construction. Hence, various tests need to be realized to identify if MDS could achieve the requirement needed in this domain. The secondary objective is to enhance the geotechnical characteristic and to reduce the pollution content of the MDS, by incorporating binders and sediments, and revealed the geotechnical characteristic. The geotechnical test result shows that the stabilization by hydraulics binders improve the geotechnical characteristic and could fulfil the requirement needed. The present of Fly Ash and Silica Fume in this study is aimed to reduce the pollution level, especially the heavy metal content. After the geotechnical study in laboratory results shows as expected then the study to identify the chemical characteristic was realized. In order to evaluate the environmental impacts, leaching test was performed. The Leaching test result shows that with 7% of Silica Fume and 10% of Fly Ash capable to fulfil the criteria needed, hence, the use of MDS is consider safe in term of geotechnical and environmental impact, as a new material in road construction

Computer-aided detection (CAD) of breast cancer on full field digital and screening film mammograms

NASA Astrophysics Data System (ADS)

Sun, Xuejun; Qian, Wei; Song, Xiaoshan; Qian, Yuyan; Song, Dansheng; Clark, Robert A.

2003-05-01

Full-field digital mammography (FFDM) as a new breast imaging modality has potential to detect more breast cancers or to detect them at smaller sizes and earlier stages compared with screening film mammography (SFM). However, its performance needs verification, and it would pose new problems for the development of CAD methods for breast cancer detection and diagnosis. Performance evaluation of CAD systems on FFDM and SFM has been conducted in this study, respectively. First, an adaptive CAD system employing a series of advanced modules has been developed on FFDM. Second, a standardization approach has been developed to make the CAD system independent of characteristics of digitizer or imaging modalities for mammography. CAD systems developed previously for SFM and developed in this study for FFDM have been evaluated on FFDM and SFM images without and with standardization, respectively, to examine the performance improvement of the CAD system developed in this study. Computerized free-response receiver operating characteristic (FROC) analysis has been adopted as performance evaluation method. Compared with previous one, the CAD system developed in this study demonstrated significantly performance improvements. However, the comparison results have shown that the performances of final CAD system in this study are not significantly different on FFDM and on SFM after standardization. It needs further study on the assessment of CAD system performance on FFDM and SFM modalities.

Characterizing Density and Complexity of Imported Cargos

DOE Office of Scientific and Technical Information (OSTI.GOV)

Birrer, Nathaniel; Divin, Charles; Glenn, Steven

X-ray inspection systems are used to detect radiological and nuclear threats in imported cargo. In order to better understand performance of these systems, system imaging capabilities and the characteristics of imported cargo need to be determined. This project involved calculation of the modulation transfer function as a metric of system imaging performance and a study of the density and inhomogeneity of imported cargos, which have been shown to correlate with human analysts, threat detection performance.

No food for thought: Food insecurity is related to poor mental health and lower academic performance among students in California's public university system.

PubMed

Martinez, Suzanna M; Frongillo, Edward A; Leung, Cindy; Ritchie, Lorrene

2018-06-01

This study examined the relationships between food insecurity, mental health, and academic performance among college students in a California public university system ( N = 8705). Structural equation modeling was performed to examine a direct path from food insecurity to student grade point average and an indirect path through mental health, controlling for demographic characteristics. Food insecurity was related to lower student grade point average directly and indirectly through poor mental health. These findings support the need for future interventions and policy on the importance of providing students with the basic needs to succeed both academically and in the future.

Networks to Strengthen Health Systems for Chronic Disease Prevention

PubMed Central

Riley, Barbara L.; Herbert, Carol P.; Best, Allan

2013-01-01

Interorganizational networks that harness the priorities, capacities, and skills of various agencies and individuals have emerged as useful approaches for strengthening preventive services in public health systems. We use examples from the Canadian Heart Health Initiative and Alberta’s Primary Care Networks to illustrate characteristics of networks, describe the limitations of existing frameworks for assessing the performance of prevention-oriented networks, and propose a research agenda for guiding future efforts to improve the performance of these initiatives. Prevention-specific assessment strategies that capture relevant aspects of network performance need to be identified, and feedback mechanisms are needed that make better use of these data to drive change in network activities. PMID:24028225

DOE Office of Scientific and Technical Information (OSTI.GOV)

Friese, Ryan; Khemka, Bhavesh; Maciejewski, Anthony A

Rising costs of energy consumption and an ongoing effort for increases in computing performance are leading to a significant need for energy-efficient computing. Before systems such as supercomputers, servers, and datacenters can begin operating in an energy-efficient manner, the energy consumption and performance characteristics of the system must be analyzed. In this paper, we provide an analysis framework that will allow a system administrator to investigate the tradeoffs between system energy consumption and utility earned by a system (as a measure of system performance). We model these trade-offs as a bi-objective resource allocation problem. We use a popular multi-objective geneticmore » algorithm to construct Pareto fronts to illustrate how different resource allocations can cause a system to consume significantly different amounts of energy and earn different amounts of utility. We demonstrate our analysis framework using real data collected from online benchmarks, and further provide a method to create larger data sets that exhibit similar heterogeneity characteristics to real data sets. This analysis framework can provide system administrators with insight to make intelligent scheduling decisions based on the energy and utility needs of their systems.« less

Evaluation and Analysis of the ANSI X3T9.5 (FDDI) PMD and Proposed SMF-PMD as Influenced by Various Fiber Link Characteristics

NASA Technical Reports Server (NTRS)

Wernicki, M. Chris

1991-01-01

The purpose of this project is to evaluate the operational parameters of the Kennedy Space Center (KSC) fiber optic cable plant. The evaluation is based on the Fiber Distributed Data Interface (FDDI) Physical Medium Dependent (PMD) and Single Mode Fiber (SMF) PMD standards. From the KSC fiber profile, it would be necessary to develop the modifications needed in existing FDDI PMD and proposed SMF-PMD standards to provide for FDDI implementation and operation at KSC. This analysis should examine the major factors that influence the operating conditions of the KSC fiber plant. These factors would include, but are not limited to the number and type of connectors, attenuation and dispersion characteristics of the fiber, non-standard fiber sizes, modal bandwidth, and many other relevant or significant fiber plant characteristics that effect FDDI characteristics. This analysis is needed to gain a better understanding of overall impact that each of these factors have on FDDI performance at KSC.

Performance characteristics of long-track speed skaters: a literature review.

PubMed

Konings, Marco J; Elferink-Gemser, Marije T; Stoter, Inge K; van der Meer, Dirk; Otten, Egbert; Hettinga, Florentina J

2015-04-01

Speed skating is an intriguing sport to study from different perspectives due to the peculiar way of motion and the multiple determinants for performance. This review aimed to identify what is known on (long-track) speed skating, and which individual characteristics determine speed skating performance. A total of 49 studies were included. Based on a multidimensional performance model, person-related performance characteristics were categorized in anthropometrical, technical, physiological, tactical, and psychological characteristics. Literature was found on anthropometry, technique, physiology, and tactics. However, psychological studies were clearly under-represented. In particular, the role of self-regulation might deserve more attention to further understand mechanisms relevant for optimal performance and for instance pacing. Another remarkable finding was that the technically/biomechanically favourable crouched skating technique (i.e. small knee and trunk angle) leads to a physiological disadvantage: a smaller knee angle may increase the deoxygenation of the working muscles. This is an important underlying aspect for the pacing tactics in speed skating. Elite speed skaters need to find the optimal balance between obtaining a fast start and preventing negative technical adaptations later on in the race by distributing their available energy over the race in an optimal way. More research is required to gain more insight into how this impacts on the processes of fatigue and coordination during speed skating races. This can lead to a better understanding on how elite speed skaters can maintain the optimal technical characteristics throughout the entire race, and how they can adapt their pacing to optimize all identified aspects that determine performance.

Development of Career Opportunities for Technicians in the Nuclear Medicine Field, Phase I. Interim Report Number 1: Survey of Job Characteristics, Manpower Needs and Training Resources, July 1969.

ERIC Educational Resources Information Center

Technical Education Research Center, Cambridge, MA.

Phase I of a multiphase research program in progress at the Technical Education Research Center, Inc., was conducted to analyze needs and resources in terms of job performance tasks, career opportunities, and training requirements for nuclear medical technicians. Data were gathered through personal interviews with 203 persons, mostly physicians,…

Impacts on work absence and performance: what really matters?

PubMed

Wynne-Jones, Gwenllian; Buck, Rhiannon; Varnava, Alice; Phillips, Ceri; Main, Chris J

2009-12-01

A number of factors influence an individual's decision to take sickness absence or to remain at work while ill. The relationship between health, work characteristics, individual perceptions of work and sickness absence and performance is complex and further clarification of the interactions between these factors is necessary. To assess the relative impact of health, work characteristics and perceptions of work on absence and performance. Cross-sectional survey of two public sector organizations (n = 505). Data were analysed using multivariate linear regression to assess the individual and combined influence of each class of independent variables on the following: days sickness absence, spells of sickness absence, VAS performance and presenteeism. Characteristics of work were weakly associated with days absence and performance. Perceptions of work were more strongly associated with performance than absence. Measures of mental health, rather than physical health, had the greatest influence on ability to work. Poor health had a greater impact on work performance than work absence. When considered together, health variables accounted for the largest proportion of explained variance in both absence and performance when compared with characteristics of work and work perceptions. Using absence as a marker of health-associated compromise at work may lead to an underestimation of the impact of health on work. This study demonstrates the need to manage the impact of health problems on the workforce not only from a bio-medical perspective but also in terms of the psychological pressures and the social context in which employees work.

Characteristics and Needs for Overhead Guide Sign Illumination from Vehicular Headlamps

DOT National Transportation Integrated Search

1999-09-01

The Federal Highway Administration (FHWA) is concerned about changes in headlamp performance of the present fleet of vehicles in the US relative to its ability to properly illuminate traffic signs, especially overhead guide signs. If this is true, ov...

Resident and facility characteristics associated with care-need level deterioration in long-term care welfare facilities in Japan.

PubMed

Jin, Xueying; Tamiya, Nanako; Jeon, Boyoung; Kawamura, Akira; Takahashi, Hideto; Noguchi, Haruko

2018-05-01

To determine the resident and facility characteristics associated with residents' care-need level deterioration in long-term care welfare facilities in Japan. A nationally representative sample of 358 886 residents who lived in 3774 long-term care welfare facilities for at least 1 year from October 2012 was obtained from long-term care insurance claims data. Facility characteristics were linked with a survey of institutions and establishments for long-term care in 2012. We used a multilevel logistic regression according to the inclusion and exclusion of lost to follow-up to define the resident and facility characteristics associated with resident care-need level deteriorations (lost to follow-up: the majority were hospitalized residents or had died; were treated as deterioration in the including loss to follow-up model). Adjusting for the covariates, at the resident level, older age and lower care-need level at baseline were more likely to show deterioration in the care-need level. At the facility level, metropolitan facilities, unit model (all private room settings) and mixed-model facilities (partly private room settings) were less likely to experience care-need level deterioration. A higher proportion of registered nurses among all nurses was negatively related to care-need level deterioration only in the model including lost to follow-up. A higher proportion of registered dietitians among all dietitians and the facilities in business for fewer years were negatively associated with care-need level deterioration only in the model excluding lost to follow-up. The present study could help identify residents who are at risk of care-need level deterioration, and could contribute to improvements in provider quality performance and enhance competence in the market. Geriatr Gerontol Int 2018; 18: 758-766. © 2018 The Authors Geriatrics & Gerontology International published by John Wiley & Sons Australia, Ltd on behalf of Japan Geriatrics Society.

[Characteristics of Nutrition in Competitive Sports, Ranging from Leisure Activities to High-Performance Athletics].

PubMed

Braun, H

2016-08-01

Nutrition has a crucial influence on physical and mental performance ability and is an important measure along sidetraining in high-performance athletes. However, this form of nutritionis not applicable for every athlete and in every situation. The question of optimal nutrition requires involvement with the particular type of sports, an athlete's current training stage, and athletes' individual requirements and objectives. Implementation takes time and individual motivation on the part of athletes and the specialist staff who engage intensively with the nutritional needs of athletes. In addition to adequate energy provision, it is important to divide the energy sensibly among the energy sources carbohydrates, fats, and protein. Performance athletes' higher need for protein can usually be covered in their regular diet; supplements are needed only in exceptional cases. Studies have shown that small amounts of 15 - 25 g protein are sensible after weight training, in order to stimulate muscle protein synthesis. The need for carbohydrates increases dynamically with the intensity and duration of physical exertion. A sufficient supply is crucial for achieving maximum performance. Low carb diets are unsuitable for performance athletes. So called low-glycogen training, however, can lead to better adjustment/adaptation processes in selected training stages and can increase performance ability. © Georg Thieme Verlag KG Stuttgart · New York.

Preclinical testing for aortic endovascular grafts: results of a Food and Drug Administration workshop.

PubMed

Abel, Dorothy B; Beebe, Hugh G; Dedashtian, Mark M; Morton, Michael C; Moynahan, Megan; Smith, Loius J; Weinberg, Steven L

2002-05-01

Since their introduction into clinical trials in the United States, endovascular aortic grafts have shown various types of problems. Although details of design and construction vary between different endovascular grafts and failure modes have had a variety of causes and clinical effects, the inability of preclinical testing to predict these failures remains common to all endovascular grafts. The need to improve preclinical testing in an attempt to reduce clinical device failures resulted in a Food and Drug Administration-sponsored workshop on endovascular graft preclinical testing held in Rockville, Md, from July 31 to August 1, 2001. FORMAT: The workshop was not designed as a consensus conference. Instead, it provided a forum for bringing stakeholders together to define problems and identify areas of agreement and disagreement. The workshop had 34 invited participants who represented device manufacturers, the medical community, the Food and Drug Administration, and testing facilities, and international attendance was more than 120 people. Discussion centered on: 1, defining the physiologic, anatomic, and morphologic characteristics of abdominal aortic aneurysms before and after endovascular graft treatment; 2, identifying the types of failures that have been observed clinically; and 3, determining which characteristics should be considered during preclinical modeling to better predict clinical performance. Attendees agreed to the need to better define and address anatomic characteristics and changes in the aneurysm after endograft treatment to optimize preclinical testing. Much discussion and little agreement occurred on the importance of flow-related forces on graft performance or the need or ability to define and model physiologic compliance during durability testing. The discussion and conclusions are summarized in this paper and are provided in detail at: http://www.fda.gov/cdrh/meetings/073101workshop.html. The workshop raised awareness of significant performance issues and the challenges of modeling the extremely variable and relatively undefined environment of abdominal aortic aneurysms. Through the interactive format of the workshop, participants identified areas of preclinical testing, device design, and aspects of the simulated environment that need further consideration.

Performance in quasi-firms: an example from the Community Clinical Oncology Program.

PubMed

Lacey, L M; Hynes, D M; Kaluzny, A D

1992-01-01

In this analysis, the authors examined the effects of different sets of process, structure, and environmental variables on the performance of the CCOP as a quasi-firm. Specifically, they distinguished between internal organizational processes, structural, and size characteristics of the CCOP and the organizational environment created by prior NCI program experience and the relationship within the quasi-firm. The analysis revealed that these sets of organizational and environmental characteristics have differential effects on treatment accrual. The strongest predictors are those associated with the quasi-firm relationship between the CCOP and its chosen research bases. Any definitive policy implications for the design of organizational network relationships--especially the CCOPs--will require further analysis. Particular attention needs to be given to the longitudinal nature of the relationships and the ability of these organizational and environmental factors to affect other aspects of performance. Several points have been made within this initial assessment. First, the structural character of the CCOP and its relationship to its organizational environment are important factors affecting accrual performance. The subtleties of this multivariate model are not as important as simply demonstrating that the various internal and external characteristics of these organizations as quasi-firms simultaneously affect their ability to accrue patients to clinical trials. Secondly, the importance of research base relations, and particularly the significant role of nurses, needs to be emphasized. While CCOPs were originally designed as a network of physicians and hospitals, it appears that an infrastructure of professionally active nurses working within a larger organizational environment is critical to success--at least as defined by accrual to treatment protocols. Finally, the failure of prior experience with other NCI community programs to affect CCOP accrual performance suggests that such experience does not assure "organizational learning" that may enhance performance. This suggests that CCOPs can be designated de novo to maximize performance without necessarily having to undergo a developmental or experiential phase involving community cancer programs to be effective. However, the authors suspect that another method of characterizing experience may produce different results. Further analyses of these data will test these results against other measures of CCOP performance. Specifically, attention will be given to whether this same set of characteristics is predictive of accrual to cancer control research protocols. Similarly, these same organizational characteristics may or may not be associated with other dimensions of CCOP performance such as changes in physician practice patterns and/or levels of institutionalization of the CCOP within its local community.(ABSTRACT TRUNCATED AT 400 WORDS)

Limits of intravascular contrast extravasation on computed tomography scan to define the need for pelvic angioembolization in pelvic blunt trauma: a specific assessment on the risk of false-positives.

PubMed

Ramin, Séverin; Hermida, Margaux; Millet, Ingrid; Murez, Thibault; Monnin, Valérie; Hamoui, Mazen; Capdevila, Xavier; Charbit, Jonathan

2018-06-12

The objective was to assess the predictive performance of different intravascular contrast extravasation (ICE) characteristics for need for pelvic transarterial embolization (TAE) to determine the risk factors of false-positives. A retrospective study was performed in our trauma center between 2010 and 2015. All severe trauma patients with pelvic fracture were included. Pelvic ICE characteristics on computed tomography (CT) scan were studied: arterial (aSICE), portal surface (pSICE), and extension (exSICE) anatomic relationships. The overall predictive performance of ICE surfaces for pelvic TAE was analyzed using receiver operating characteristic curves. The analysis focused on risk factors for false-positives. Among 311 severe trauma patients with pelvic ring fracture (mean age, 42 ± 19 years, mean Injury Severity Score, 27 ± 19), 94 (30%) had at least one pelvic ICE on the initial CT scan. Patients requiring pelvic TAE had significantly larger aSICE and pSICE than others (P=0.001 and P=0.035, respectively). The overall ability of ICE surfaces to predict pelvic TAE was modest (aSICE AUC, 0.76 [95% CI, 0.64-0.90]; P=0.011) or non-significant (pSICE and exSICE). The high-sensitivity threshold was defined as aSICE ≥20 mm. Using this threshold, 76% of patients were false-positives. Risk factors for false-positives were: admission systolic blood pressure ≥90 mmHg (63% versus 20%; P=0.03) and low transfusion needs (63% versus 10%; P=0.009), extravasation in contact with complex bone fracture (78% versus 30%; P=0.008) or the absence of a direct relationship between extravasation and a large retroperitoneal hematoma (100% versus 38%; P<0.001). A significant pelvic ICE during the arterial phase does not guarantee the need for pelvic TAE. Three-quarter of patients with aSICE ≥20 mm did not need pelvic TAE. Several complementary CT scan criteria will help to identify this risk of false-positives to determine adequate hemostatic pelvic procedures.This work is an original article, retrospective study Level II of evidence, Therapeutic/Critical Care management.

Appliques for the maintenance of lead-based painted bridges : a laboratory assessment of field-performance characteristics.

DOT National Transportation Integrated Search

2004-01-01

Approximately 3,500 bridges in Virginia having steel superstructures are coated with lead-based paints. Many of these bridges are in need of paint maintenance. This research evaluated applique technology, an alternative to the conventional paradigm...

Non-Intrusive, Time-Resolved Hall Thruster Near-Field Electron Temperature Measurements

DTIC Science & Technology

2011-08-01

With the growing interest in Hall thruster technology, comes the need to fully characterize the plasma dynamics that determine performance. Of...instabilities characteristic of Hall thruster behavior, time resolved techniques must be developed. This study presents a non-intrusive method of

MASH TL-3 Testing and Evaluation of a Steel Bridge Rail with Pickets

DOT National Transportation Integrated Search

2012-09-01

TxDOT has a need for a steel bridge rail that anchors to a concrete curb with an aesthetic appearance using steel pickets. Bridge railings that use pickets (concrete and steel) have exhibited undesirable safety performance characteristics. The purpos...

Preliminary noise tradeoff study of a Mach 2.7 cruise aircraft

NASA Technical Reports Server (NTRS)

Mascitti, V. R.; Maglieri, D. J. (Editor); Raney, J. P. (Editor)

1979-01-01

NASA computer codes in the areas of preliminary sizing and enroute performance, takeoff and landing performance, aircraft noise prediction, and economics were used in a preliminary noise tradeoff study for a Mach 2.7 design supersonic cruise concept. Aerodynamic configuration data were based on wind-tunnel model tests and related analyses. Aircraft structural characteristics and weight were based on advanced structural design methodologies, assuming conventional titanium technology. The most advanced noise prediction techniques available were used, and aircraft operating costs were estimated using accepted industry methods. The 4-engines cycles included in the study were based on assumed 1985 technology levels. Propulsion data was provided by aircraft manufacturers. Additional empirical data is needed to define both noise reduction features and other operating characteristics of all engine cycles under study. Data on VCE design parameters, coannular nozzle inverted flow noise reduction and advanced mechanical suppressors are urgently needed to reduce the present uncertainties in studies of this type.

SELECTION OF ENDOCRINOLOGY SUBSPECIALTY TRAINEES: WHICH APPLICANT CHARACTERISTICS ARE ASSOCIATED WITH PERFORMANCE DURING FELLOWSHIP TRAINING?

PubMed Central

Natt, Neena; Chang, Alice Y.; Berbari, Elie F.; Kennel, Kurt A.; Kearns, Ann E.

2016-01-01

Objective To determine which residency characteristics are associated with performance during endocrinology fellowship training as measured by competency-based faculty evaluation scores and faculty global ratings of trainee performance. Method We performed a retrospective review of interview applications from endocrinology fellows who graduated from a single academic institution between 2006 and 2013. Performance measures included competency-based faculty evaluation scores and faculty global ratings. The association between applicant characteristics and measures of performance during fellowship was examined by linear regression. Results The presence of a laudatory comparative statement in the residency program director’s letter of recommendation (LoR) or experience as a chief resident was significantly associated with competency-based faculty evaluation scores (β = 0.22, P = 0.001; and β = 0.24, P = 0.009, respectively) and faculty global ratings (β = 0.85, P = 0.006; and β = 0.96, P = 0.015, respectively). Conclusion The presence of a laudatory comparative statement in the residency program director’s LoR or experience as a chief resident were significantly associated with overall performance during subspecialty fellowship training. Future studies are needed in other cohorts to determine the broader implications of these findings in the application and selection process. PMID:26437219

Characteristics of the group of radiologists that benefits the most using Breast Screen Reader Assessment Strategy (BREAST)

NASA Astrophysics Data System (ADS)

Ganesan, A.; Alakhras, M.; Brennan, P. C.; Lee, W.; Tapia, K.; Mello-Thoms, C.

2018-03-01

Purpose: To determine the impact of Breast Screen Reader Assessment Strategy (BREAST) over time in improving radiologists' breast cancer detection performance, and to identify the group of radiologists that benefit the most by using BREAST as a training tool. Materials and Methods: Thirty-six radiologists who completed three case-sets offered by BREAST were included in this study. The case-sets were arranged in radiologists' chronological order of completion and five performance measures (sensitivity, specificity, location sensitivity, receiver operating characteristics area under the curve (ROC AUC) and jackknife alternative free-response receiver operating characteristic (JAFROC) figure-of-merit (FOM)), available from BREAST, were compared between case-sets to determine the level of improvement achieved. The radiologists were then grouped based on their characteristics and the above performance measures between the case-sets were compared. Paired t-tests or Wilcoxon signed-rank tests with statistical significance set at p < 0.05 were used to compare the performance measures. Results: Significant improvement was demonstrated in radiologists' case-set performance in terms of location sensitivity and JAFROC FOM over the years, and radiologists' location sensitivity and JAFROC FOM showed significant improvement irrespective of their characteristics. In terms of ROC AUC, significant improvement was shown for radiologists who were reading screen mammograms for more than 7 years and spent more than 9 hours per week reading mammograms. Conclusion: Engaging with case-sets appears to enhance radiologists' performance suggesting the important value of initiatives such as BREAST. However, such performance enhancement was not shown for everyone, highlighting the need to tailor the BREAST platform to benefit all radiologists.

Performance assessment of the antenna setup for the ITER plasma position reflectometry in-vessel systems.

PubMed

Varela, P; Belo, J H; Quental, P B

2016-11-01

The design of the in-vessel antennas for the ITER plasma position reflectometry diagnostic is very challenging due to the need to cope both with the space restrictions inside the vacuum vessel and with the high mechanical and thermal loads during ITER operation. Here, we present the work carried out to assess and optimise the design of the antenna. We show that the blanket modules surrounding the antenna strongly modify its characteristics and need to be considered from the early phases of the design. We also show that it is possible to optimise the antenna performance, within the design restrictions.

Experimental evaluation of thermal energy storage

NASA Technical Reports Server (NTRS)

Asbury, J. G.; Hersh, H. N.

1980-01-01

The technical performance of commercially available thermal energy storage (TES) residential heating units under severe weather conditions is discussed. The benefits and costs of TES to the user and utility companies were assessed. The TES issues, research and development needs, and barriers to commercialization were identified. The field tests which determined the performance characteristics for the TES are described and the TES systems, which included both ceramic and hydronic systems, are compared.

Space station trace contaminant control

NASA Technical Reports Server (NTRS)

Olcutt, T.

1985-01-01

Different systems for the control of space station trace contaminants are outlined. The issues discussed include: spacecabin contaminant sources, technology base, contaminant control system elements and configuration, approach to contaminant control, contaminant load model definition, spacecraft maximum allowable concentrations, charcoal bed sizing and performance characteristics, catalytic oxidizer sizing and performance characteristics, special sorbent bed sizing, animal and plant research payload problems, and emergency upset contaminant removal. It is concluded that the trace contaminant control technology base is firm, the necessary hardware tools are available, and the previous design philosophy is still applicable. Some concerns are the need as opposed to danger of the catalytic oxidizer, contaminants with very low allowable concentrations, and the impact of relaxing materials requirements.

Evaluation of thresholding techniques for segmenting scaffold images in tissue engineering

NASA Astrophysics Data System (ADS)

Rajagopalan, Srinivasan; Yaszemski, Michael J.; Robb, Richard A.

2004-05-01

Tissue engineering attempts to address the ever widening gap between the demand and supply of organ and tissue transplants using natural and biomimetic scaffolds. The regeneration of specific tissues aided by synthetic materials is dependent on the structural and morphometric properties of the scaffold. These properties can be derived non-destructively using quantitative analysis of high resolution microCT scans of scaffolds. Thresholding of the scanned images into polymeric and porous phase is central to the outcome of the subsequent structural and morphometric analysis. Visual thresholding of scaffolds produced using stochastic processes is inaccurate. Depending on the algorithmic assumptions made, automatic thresholding might also be inaccurate. Hence there is a need to analyze the performance of different techniques and propose alternate ones, if needed. This paper provides a quantitative comparison of different thresholding techniques for segmenting scaffold images. The thresholding algorithms examined include those that exploit spatial information, locally adaptive characteristics, histogram entropy information, histogram shape information, and clustering of gray-level information. The performance of different techniques was evaluated using established criteria, including misclassification error, edge mismatch, relative foreground error, and region non-uniformity. Algorithms that exploit local image characteristics seem to perform much better than those using global information.

The Conceptual Design for a Fuel Assembly of a New Research Reactor

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ryu, J-S.; Cho, Y-G.; Yoon, D-B.

2004-10-06

A new Research Reactor (ARR) has been under design by KAERI since 2002. In this work, as a first step for the design of the fuel assembly of the ARR, the conceptual design has been carried out. The vibration characteristics of the tubular fuel model and the locking performance of the preliminary designed locking devices were investigated. In order to investigate the effects of the stiffener on the vibration characteristics of the tubular fuel, a modal analysis was performed for the finite element models of the tubular fuels with stiffeners and without stiffeners. The analysis results show that the vibrationmore » characteristics of the tubular fuel with stiffeners are better than those of the tubular fuel without stiffeners. To investigate the locking performance of the preliminary designed locking devices for the fuel assembly of the ARR, the elements of the locking devices were fabricated. Then the torsional resistance, fixing status and vibration characteristics of the locking devices were tested. The test results show that using the locking device with fins on the bottom guide can prevent the torsional motion of the fuel assembly, and that additional springs or guides on the top of the fuel assembly are needed to suppress the lateral motion of the fuel assembly. Based on the modal analysis and experimental results, the fuel assembly and locking devices of the ARR were designed and its prototype was fabricated. The locking performance, pressure drop characteristics and vibration characteristics of the newly designed fuel assembly will be tested in the near future.« less

Control of Industrial Safety Based on Dynamic Characteristics of a Safety Budget-Industrial Accident Rate Model in Republic of Korea.

PubMed

Choi, Gi Heung; Loh, Byoung Gook

2017-06-01

Despite the recent efforts to prevent industrial accidents in the Republic of Korea, the industrial accident rate has not improved much. Industrial safety policies and safety management are also known to be inefficient. This study focused on dynamic characteristics of industrial safety systems and their effects on safety performance in the Republic of Korea. Such dynamic characteristics are particularly important for restructuring of the industrial safety system. The effects of damping and elastic characteristics of the industrial safety system model on safety performance were examined and feedback control performance was explained in view of cost and benefit. The implications on safety policies of restructuring the industrial safety system were also explored. A strong correlation between the safety budget and the industrial accident rate enabled modeling of an industrial safety system with these variables as the input and the output, respectively. A more effective and efficient industrial safety system could be realized by having weaker elastic characteristics and stronger damping characteristics in it. A substantial decrease in total social cost is expected as the industrial safety system is restructured accordingly. A simple feedback control with proportional-integral action is effective in prevention of industrial accidents. Securing a lower level of elastic industrial accident-driving energy appears to have dominant effects on the control performance compared with the damping effort to dissipate such energy. More attention needs to be directed towards physical and social feedbacks that have prolonged cumulative effects. Suggestions for further improvement of the safety system including physical and social feedbacks are also made.

Introduction to a New Approach to Experiential Learning.

ERIC Educational Resources Information Center

Jackson, Lewis; MacIsaac, Doug

1994-01-01

A process model for experiential learning (EL) in adult education begins with the characteristics and needs of adult learners and conceptual foundations of EL. It includes methods and techniques for in-class and field-based experiences, building a folio (point-in-time performance assessment), and portfolio construction (assessing transitional…

The APU and Assessment in the Middle Years.

ERIC Educational Resources Information Center

Marjoram, D. T. E.

1978-01-01

Because of student characteristics in the middle years, several types of assessment are needed. The national monitoring system being developed by the Assessment of Performance Unit (APU) may prove a useful assessment framework for individual schools, providing developmental data for program comparisons and student movement between schools. (SJL)

The Implementation of Graduate Education to Professional Performance: Teachers' Perspectives

ERIC Educational Resources Information Center

Berkant, Hasan Güner; Baysal, Seda

2017-01-01

One of the core figures of education system is undoubtfully the teacher who is expected to contribute dramatically to the qualified learning environment both with professional skills and with personal characteristics. Therefore, the need for graduate education and its significance to specialize in maintaining education after Bachelor's degree has…

The 3P Learning Model

ERIC Educational Resources Information Center

Chatti, Mohamed Amine; Jarke, Matthias; Specht, Marcus

2010-01-01

Recognizing the failures of traditional Technology Enhanced Learning (TEL) initiatives to achieve performance improvement, we need to rethink how we design new TEL models that can respond to the learning requirements of the 21st century and mirror the characteristics of knowledge and learning which are fundamentally personal, social, distributed,…

Evidence Based Education Request Desk. EBE #845

ERIC Educational Resources Information Center

Regional Educational Laboratory Southeast, 2011

2011-01-01

Gifted students have unique educational needs. Although gifted students are as varied as other students in terms of their learning styles and preferences, all gifted learners have exhibited unusual performance or potential and they have distinctive characteristics, shared by most of these students, which require effective responses from educators.…

Usefulness of cardiovascular magnetic resonance imaging to predict the need for intervention in patients with coarctation of the aorta.

PubMed

Muzzarelli, Stefano; Meadows, Alison Knauth; Ordovas, Karen Gomes; Higgins, Charles Bernard; Meadows, Jeffery Joshua

2012-03-15

Cardiovascular magnetic resonance (CMR) imaging can predict hemodynamically significant coarctation of the aorta (CoA) with a high degree of discrimination. However, the ability of CMR to predict important clinical outcomes in this patient population is unknown. Therefore, we sought to define the ability of CMR to predict the need for surgical or transcatheter intervention in patients with CoA. We retrospectively reviewed the data from 133 consecutive patients who had undergone CMR for the evaluation of known or suspected CoA. The characteristics of the CMR-derived variables predicting the need for surgical or transcatheter intervention for CoA within 1 year were determined through logistic regression analysis. Therapeutic aortic intervention was performed in 41 (31%) of the 133 patients during the study period. The indexed minimum aortic cross-sectional area was the strongest predictor of subsequent intervention (area under the receiver operating characteristic curve 0.975) followed by heart rate-corrected deceleration time in the descending aorta (area under the receiver operating characteristic curve 0.951), and the percentage of flow increase (area under the receiver operating characteristic curve 0.867). The combination of the indexed minimum aortic cross-sectional area and rate-corrected deceleration time in the descending aorta provided the best predictive model (area under the receiver operating characteristic curve 0.986). In conclusion, CMR findings can predict the need for subsequent intervention in CoA. These findings reinforce the "gate-keeper role" of CMR to cardiac catheterization by providing valuable diagnostic and powerful prognostic information and could guide additional treatment of patients with CoA with the final intent of reducing the number of diagnostic catheterizations in such patients. Copyright © 2012 Elsevier Inc. All rights reserved.

A suite of phantom-based test methods for assessing image quality of photoacoustic tomography systems

NASA Astrophysics Data System (ADS)

Vogt, William C.; Jia, Congxian; Wear, Keith A.; Garra, Brian S.; Pfefer, T. Joshua

2017-03-01

As Photoacoustic Tomography (PAT) matures and undergoes clinical translation, objective performance test methods are needed to facilitate device development, regulatory clearance and clinical quality assurance. For mature medical imaging modalities such as CT, MRI, and ultrasound, tissue-mimicking phantoms are frequently incorporated into consensus standards for performance testing. A well-validated set of phantom-based test methods is needed for evaluating performance characteristics of PAT systems. To this end, we have constructed phantoms using a custom tissue-mimicking material based on PVC plastisol with tunable, biologically-relevant optical and acoustic properties. Each phantom is designed to enable quantitative assessment of one or more image quality characteristics including 3D spatial resolution, spatial measurement accuracy, ultrasound/PAT co-registration, uniformity, penetration depth, geometric distortion, sensitivity, and linearity. Phantoms contained targets including high-intensity point source targets and dye-filled tubes. This suite of phantoms was used to measure the dependence of performance of a custom PAT system (equipped with four interchangeable linear array transducers of varying design) on design parameters (e.g., center frequency, bandwidth, element geometry). Phantoms also allowed comparison of image artifacts, including surface-generated clutter and bandlimited sensing artifacts. Results showed that transducer design parameters create strong variations in performance including a trade-off between resolution and penetration depth, which could be quantified with our method. This study demonstrates the utility of phantom-based image quality testing in device performance assessment, which may guide development of consensus standards for PAT systems.

Integration and the performance of healthcare networks:do integration strategies enhance efficiency, profitability, and image?

PubMed Central

Wan, Thomas T.H.; Ma, Allen; Y.J.Lin, Blossom

2001-01-01

Abstract Purpose This study examines the integration effects on efficiency and financial viability of the top 100 integrated healthcare networks (IHNs) in the United States. Theory A contingency- strategic theory is used to identify the relationship of IHNs' performance to their structural and operational characteristics and integration strategies. Methods The lists of the top 100 IHNs ranked in two years, 1998 and 1999, by the SMG Marketing Group were merged to create a database for the study. Multiple indicators were used to examine the relationship between IHNs' characteristics and their performance in efficiency and financial viability. A path analytical model was developed and validated by the Mplus statistical program. Factors influencing the top 100 IHNs' images, represented by attaining ranking among the top 100 in two consecutive years, were analysed. Results and conclusion No positive associations were found between integration and network performance in efficiency or profits. Longitudinal data are needed to investigate the effect of integration on healthcare networks' financial performance. PMID:16896405

Association of tic disorders with poor academic performance in central Spain: a population-based study.

PubMed

Cubo, Esther; Trejo, José; Ausín, Vanesa; Sáez, Sara; Delgado, Vanesa; Macarrón, Jesus; Cordero, José; Louis, Elan D; Kompoliti, Katie; Benito-León, Julián

2013-07-01

To analyze the association between tic disorders and poor academic performance in school-aged children. This was a cross-sectional, observational study conducted in a randomly selected sample of mainstream school-aged children (aged 6-16 years). The sampling frame included different types of schools and educational levels. Children with poor academic performance (eg, repeating a grade, special needs), and tic disorders (defined based on Diagnostic and Statistical Manual of Mental Disorders, 4th Edition, Text Revision criteria) were identified. Children with and without tics and children with and without poor academic performance were compared in terms of clinical features (ie, medical history and neurologic and psychiatric comorbidities), school, and environmental characteristics. Logistic regression analyses were performed using school performance (dependent variable) and tic disorders (independent variable), after adjusting for confounding variables. The study cohort comprised 1867 children (mean age, 10.9 + 2.9 years; 1007 males [53.9%]). Tics were present in 162 children (8.6%), and poor academic performance was noted in 223 (11.9%). Overall poor academic performance was associated with age (OR, 1.71; P < .0001), television viewing (OR, 5.33; P = .04), attention deficit hyperactivity disorder (OR, 1.38; P < .0001), and family history of school dysfunction (OR, 2.43; P = .02) and was negatively associated with higher IQ score (OR, 0.90; P < .0001) and tic disorders (OR, 0.29; P = .01). After adjusting for other covariates, the presence of tic disorders was not associated with poor academic performance in our cohort. Early academic support and modification of environmental characteristics are needed for children at higher risk for school dysfunction, to enhance academic performance. Copyright © 2013 Mosby, Inc. All rights reserved.

Infectious Disease Transmission during Organ and Tissue Transplantation

PubMed Central

Kuehnert, Matthew J.; Fishman, Jay A.

2012-01-01

Infectious disease transmission through organ and tissue transplantation has been associated with severe complications in recipients. Determination of donor-derived infectious risk associated with organ and tissue transplantation is challenging and limited by availability and performance characteristics of current donor epidemiologic screening (e.g., questionnaire) and laboratory testing tools. Common methods and standards for evaluating potential donors of organs and tissues are needed to facilitate effective data collection for assessing the risk for infectious disease transmission. Research programs can use advanced microbiological technologies to define infectious risks posed by pathogens that are known to be transplant transmissible and provide insights into transmission potential of emerging infectious diseases for which transmission characteristics are unknown. Key research needs are explored. Stakeholder collaboration for surveillance and research infrastructure is required to enhance transplant safety. PMID:22840823

Payload software technology

NASA Technical Reports Server (NTRS)

1976-01-01

A software analysis was performed of known STS sortie payload elements and their associated experiments. This provided basic data for STS payload software characteristics and sizes. A set of technology drivers was identified based on a survey of future technology needs and an assessment of current software technology. The results will be used to evolve a planned approach to software technology development. The purpose of this plan is to ensure that software technology is advanced at a pace and a depth sufficient to fulfill the identified future needs.

Flight Test of GL-1 Glider Half Scale Prototype

NASA Astrophysics Data System (ADS)

Fikri Zulkarnain, Muhammad; Fazlur Rahman, Muhammad; Luthfi Imam Nurhakim, Muhammad; Arifianto, Ony; Mulyanto, Taufiq

2018-04-01

GL-1 is a single-seat mid-performance glider, designed to be Indonesian National Glider. The Glider have been developing since 2014. The development produced a half scale prototype called BL-1, which had accomplished static test in 2016, then followed by first flight test at April 20th 2017, and second flight test at May 21st 2017. The purpose of the flight test was to obtain familiarization of the aircraft, aerodynamics characteristics and flow visualization, with data from flight recorded in FDR. The flight test resulted in two flights with total length of 21 minutes. The data from FDR and flight test documents extracted to analyze the characteristics and behavior of the aircraft during flight test. The aerodynamics characteristic was close to analytical results. The control was good; however, the effectiveness of control surface may need to be further analyzed. The result of the flight test will be used as a reference for further improvements and may need further testing.

A Case Study on Neural Inspired Dynamic Memory Management Strategies for High Performance Computing.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vineyard, Craig Michael; Verzi, Stephen Joseph

As high performance computing architectures pursue more computational power there is a need for increased memory capacity and bandwidth as well. A multi-level memory (MLM) architecture addresses this need by combining multiple memory types with different characteristics as varying levels of the same architecture. How to efficiently utilize this memory infrastructure is an unknown challenge, and in this research we sought to investigate whether neural inspired approaches can meaningfully help with memory management. In particular we explored neurogenesis inspired re- source allocation, and were able to show a neural inspired mixed controller policy can beneficially impact how MLM architectures utilizemore » memory.« less

System Characterization of MAHI EXO-II: A Robotic Exoskeleton for Upper Extremity Rehabilitation

PubMed Central

French, James A.; Rose, Chad G.; O'Malley, Marcia K.

2015-01-01

This paper presents the performance characterization of the MAHI Exo-II, an upper extremity exoskeleton for stroke and spinal cord injury (SCI) rehabilitation, as a means to validate its clinical implementation and to provide depth to the literature on the performance characteristics of upper extremity exoskeletons. Individuals with disabilities arising from stroke and SCI need rehabilitation of the elbow, forearm, and wrist to restore the ability to independently perform activities of daily living (ADL). Robotic rehabilitation has been proposed to address the need for high intensity, long duration therapy and has shown promising results for upper limb proximal joints. However, upper limb distal joints have historically not benefitted from the same focus. The MAHI Exo-II, designed to address this shortcoming, has undergone a static and dynamic performance characterization, which shows that it exhibits the requisite qualities for a rehabilitation robot and is comparable to other state-of-the-art designs. PMID:25984380

Power Electronic Semiconductor Materials for Automotive and Energy Saving Applications - SiC, GaN, Ga2O3, and Diamond.

PubMed

Wellmann, Peter J

2017-11-17

Power electronics belongs to the future key technologies in order to increase system efficiency as well as performance in automotive and energy saving applications. Silicon is the major material for electronic switches since decades. Advanced fabrication processes and sophisticated electronic device designs have optimized the silicon electronic device performance almost to their theoretical limit. Therefore, to increase the system performance, new materials that exhibit physical and chemical properties beyond silicon need to be explored. A number of wide bandgap semiconductors like silicon carbide, gallium nitride, gallium oxide, and diamond exhibit outstanding characteristics that may pave the way to new performance levels. The review will introduce these materials by (i) highlighting their properties, (ii) introducing the challenges in materials growth, and (iii) outlining limits that need innovation steps in materials processing to outperform current technologies.

Power Electronic Semiconductor Materials for Automotive and Energy Saving Applications – SiC, GaN, Ga2O3, and Diamond

PubMed Central

2017-01-01

Power electronics belongs to the future key technologies in order to increase system efficiency as well as performance in automotive and energy saving applications. Silicon is the major material for electronic switches since decades. Advanced fabrication processes and sophisticated electronic device designs have optimized the silicon electronic device performance almost to their theoretical limit. Therefore, to increase the system performance, new materials that exhibit physical and chemical properties beyond silicon need to be explored. A number of wide bandgap semiconductors like silicon carbide, gallium nitride, gallium oxide, and diamond exhibit outstanding characteristics that may pave the way to new performance levels. The review will introduce these materials by (i) highlighting their properties, (ii) introducing the challenges in materials growth, and (iii) outlining limits that need innovation steps in materials processing to outperform current technologies. PMID:29200530

System Characterization of MAHI EXO-II: A Robotic Exoskeleton for Upper Extremity Rehabilitation.

PubMed

French, James A; Rose, Chad G; O'Malley, Marcia K

2014-10-01

This paper presents the performance characterization of the MAHI Exo-II, an upper extremity exoskeleton for stroke and spinal cord injury (SCI) rehabilitation, as a means to validate its clinical implementation and to provide depth to the literature on the performance characteristics of upper extremity exoskeletons. Individuals with disabilities arising from stroke and SCI need rehabilitation of the elbow, forearm, and wrist to restore the ability to independently perform activities of daily living (ADL). Robotic rehabilitation has been proposed to address the need for high intensity, long duration therapy and has shown promising results for upper limb proximal joints. However, upper limb distal joints have historically not benefitted from the same focus. The MAHI Exo-II, designed to address this shortcoming, has undergone a static and dynamic performance characterization, which shows that it exhibits the requisite qualities for a rehabilitation robot and is comparable to other state-of-the-art designs.

Requirements and Techniques for Developing and Measuring Simulant Materials

NASA Technical Reports Server (NTRS)

Rickman, Doug; Owens, Charles; Howard, Rick

2006-01-01

The 1989 workshop report entitled Workshop on Production and Uses of Simulated Lunar Materials and the Lunar Regolith Simulant Materials: Recommendations for Standardization, Production, and Usage, NASA Technical Publication identify and reinforced a need for a set of standards and requirements for the production and usage of the lunar simulant materials. As NASA need prepares to return to the moon, a set of requirements have been developed for simulant materials and methods to produce and measure those simulants have been defined. Addressed in the requirements document are: 1) a method for evaluating the quality of any simulant of a regolith, 2) the minimum Characteristics for simulants of lunar regolith, and 3) a method to produce lunar regolith simulants needed for NASA's exploration mission. A method to evaluate new and current simulants has also been rigorously defined through the mathematics of Figures of Merit (FoM), a concept new to simulant development. A single FoM is conceptually an algorithm defining a single characteristic of a simulant and provides a clear comparison of that characteristic for both the simulant and a reference material. Included as an intrinsic part of the algorithm is a minimum acceptable performance for the characteristic of interest. The algorithms for the FoM for Standard Lunar Regolith Simulants are also explicitly keyed to a recommended method to make lunar simulants.

Distributed utility technology cost, performance, and environmental characteristics

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wan, Y; Adelman, S

1995-06-01

Distributed Utility (DU) is an emerging concept in which modular generation and storage technologies sited near customer loads in distribution systems and specifically targeted demand-side management programs are used to supplement conventional central station generation plants to meet customer energy service needs. Research has shown that implementation of the DU concept could provide substantial benefits to utilities. This report summarizes the cost, performance, and environmental and siting characteristics of existing and emerging modular generation and storage technologies that are applicable under the DU concept. It is intended to be a practical reference guide for utility planners and engineers seeking informationmore » on DU technology options. This work was funded by the Office of Utility Technologies of the US Department of Energy.« less

Relationship between quality of care and choice of clinical computing system: retrospective analysis of family practice performance under the UK's quality and outcomes framework.

PubMed

Kontopantelis, Evangelos; Buchan, Iain; Reeves, David; Checkland, Kath; Doran, Tim

2013-08-02

To investigate the relationship between performance on the UK Quality and Outcomes Framework pay-for-performance scheme and choice of clinical computer system. Retrospective longitudinal study. Data for 2007-2008 to 2010-2011, extracted from the clinical computer systems of general practices in England. All English practices participating in the pay-for-performance scheme: average 8257 each year, covering over 99% of the English population registered with a general practice. Levels of achievement on 62 quality-of-care indicators, measured as: reported achievement (levels of care after excluding inappropriate patients); population achievement (levels of care for all patients with the relevant condition) and percentage of available quality points attained. Multilevel mixed effects multiple linear regression models were used to identify population, practice and clinical computing system predictors of achievement. Seven clinical computer systems were consistently active in the study period, collectively holding approximately 99% of the market share. Of all population and practice characteristics assessed, choice of clinical computing system was the strongest predictor of performance across all three outcome measures. Differences between systems were greatest for intermediate outcomes indicators (eg, control of cholesterol levels). Under the UK's pay-for-performance scheme, differences in practice performance were associated with the choice of clinical computing system. This raises the question of whether particular system characteristics facilitate higher quality of care, better data recording or both. Inconsistencies across systems need to be understood and addressed, and researchers need to be cautious when generalising findings from samples of providers using a single computing system.

From Stats to Stage-Translational Research in Performing Arts Medicine.

PubMed

Ackermann, Bronwen J

2016-12-01

Medical Problems of Performing Artists, since its inception under the legendary Alice Brandfonbrener's guidance and vision, has always recognized the need for voices to be heard from the clinic, stage, and experimental research. This has been important in a relatively young field like performing arts medicine, where there is not yet a robust base of evidence to draw from for the complex range of physical, psychological, and institutional challenges that can affect performer health. Evidence-based medicine has long been described as using the best available research in conjunction with clinical expertise, while considering patient beliefs, characteristics, and circumstances.

An Observational Study of Service Dogs for Veterans With Posttraumatic Stress Disorder.

PubMed

Yarborough, Bobbi Jo H; Owen-Smith, Ashli A; Stumbo, Scott P; Yarborough, Micah T; Perrin, Nancy A; Green, Carla A

2017-07-01

This study examined needs related to posttraumatic stress disorder (PTSD), assistance by service dogs, and feasibility of data collection among veterans receiving service dogs. Questionnaires assessed PTSD-related needs and services performed or expected to be performed by service dogs among 78 veterans who had or were on a wait list for a service dog (average age, 42; women, 31%). Analyses compared pre-post characteristics among 22 veterans who received a service dog as part of the study (91% follow-up; average follow-up=3.37±2.57 months). Veterans reported that the most important services performed were licking or nudging veterans to help them "stay present," preventing panic, and putting space between veterans and strangers. High follow-up rates and improvements in outcomes with moderate to large effect sizes among recipients of study-provided dogs suggest further study is warranted. Service dogs may be feasible supports for veterans with PTSD; randomized clinical trials are needed to assess effectiveness.

Entrepreneurial Librarianship: The Key to Effective Information Services Management. Information Services Management Series.

ERIC Educational Resources Information Center

St. Clair, Guy

The need to approach library management from an entrepreneurial business perspective is vital, whether the information facility is in a corporate, academic, public or school setting. Although librarianship is not a business, library management must be driven by the same characteristics-- responsibility, performance, and control--as any other…

Data-Acquisition System With Remotely Adjustable Amplifiers

NASA Technical Reports Server (NTRS)

Nurge, Mark A.; Larson, William E.; Hallberg, Carl G.; Thayer, Steven W.; Ake, Jeffrey C.; Gleman, Stuart M.; Thompson, David L.; Medelius, Pedro J.; Crawford, Wayne A.; Vangilder, Richard M.;

Sensing Site-Specific Variability in Soil and Plant Phosphorus and Other Mineral Nutrients by X-Ray Fluorescence Spectrometry

USDA-ARS?s Scientific Manuscript database

Detection and rapid response to in-season changes of soil nutrient availability and plant needs with weather conditions and site-specific characteristics are essential to the optimal performance of an agronomic crop production system. With recent advances in material science, detector design and se...

Habitat and host associations of Craterellus tubaeformis in northwestern Oregon.

Treesearch

M.J. Trappe

2004-01-01

Knowledge of the habitat and host associations of Craterellus tubaeformis (winter chanterelle) is the key to understanding the ecological characteristics needed for its conservation. In this study, a survey of forest types in northwestern Oregon for mycorrhizal associates is performed and the hypotheses that stand age and the volume of well-decayed...

Using Goal Analysis to Drive Improvements in Performance and Outcomes

ERIC Educational Resources Information Center

Lawlor, David; Spitz, Romy; York, Michaela; Harvey, Brenda

2013-01-01

Economic pressures for public health and human services systems to control budgets are increasing the need for demonstrating value of support services provided to persons with intellectual disabilities. In this article, we build from earlier work that presented a method for assessing goal attainment to expand the study of goal characteristics as a…

Predicting Stereotype Threat, Test Anxiety, and Cognitive Ability Test Performance: An Examination of Three Models

ERIC Educational Resources Information Center

Sawyer, Jr., Thomas P.; Hollis-Sawyer, Lisa A.

2005-01-01

As the classroom and workplace, among other contexts, become more diverse in their population characteristics, the need to be aware of specific factors impacting testing outcome issues correspondingly increases. The focus in this study, among other purposes, was to identify possible interactions between examinee's individual-difference…

A comment on the dependence of LED’s efficiency on the junction ideality factor

NASA Astrophysics Data System (ADS)

Sethi, Anubhav; Gupta, Yashika; Arun, P.

2018-05-01

P–n junctions form the basic building blocks for any semiconductor device. Therefore, the complete understanding of the junction characteristics is very important. Although being a widely discussed topic in electronics, there are still some gaps such as finding the value and significance of the junction ideality factor, that needs to be addressed. In this article we have discussed the problems faced while extracting the ideality factor from the I–V characteristics of a p–n LED and its significance in device performance.

[Liability for medical malpractice: an economic approach].

PubMed

Carles, M

2003-01-01

In recent years, changes in the organization of healthcare institutions and the increased number of medical malpractice claims have revealed the need to study the concept of medical responsibility and the repercussion of these changes on healthcare provision. To date, discussion has focussed on legal aspects and economic implications have been largely ignored.The present article reviews studies that have performed an economic analysis the subject. Firstly, we examine studies that gradually introduce the concepts of uncertainty, risk aversion and moral hazard. Secondly, in the healthcare environment, we pay particular attention to models that include new arguments on professionals' objective duties or to bargaining models when there is asymmetric information. Finally, we consider the medical malpractice insurance market and investigate how reputation and the possibilities of exercising defensive medicine influence healthcare provision. Our analysis suggests that, due to the characteristics of the healthcare market, the models proposed by the economy of information are very useful for performing economic analyses of liability in medical malpractice. However, alternative hypotheses also need to be formulated so that these models can be adapted to the specific characteristics of different health systems.

WFIRST Observatory Performance

NASA Technical Reports Server (NTRS)

Kruk, Jeffrey W.

2012-01-01

The WFIRST observatory will be a powerful and flexible wide-field near-infrared facility. The planned surveys will provide data applicable to an enormous variety of astrophysical science. This presentation will provide a description of the observatory and its performance characteristics. This will include a discussion of the point spread function, signal-to-noise budgets for representative observing scenarios and the corresponding limiting sensitivity. Emphasis will be given to providing prospective Guest Observers with information needed to begin thinking about new observing programs.

Low-Load Space Conditioning Needs Assessment

DOE Office of Scientific and Technical Information (OSTI.GOV)

Puttagunta, Srikanth

Heating, ventilating, and air-conditioning (HVAC) equipment must be right-sized to ensure energy performance and comfort. With limited low-load options in the HVAC market, many new-construction housing units are being fitted with oversized equipment that creates system efficiency, comfort, and cost penalties. To bridge the gap between currently available HVAC equipment that is oversized or inefficient and the rising demand for low-load HVAC equipment in the marketplace, HVAC equipment manufacturers need to be fully aware of the needs of the multifamily building and attached single-family (duplex and townhouse) home market. Over the past decade, Steven Winter Associates, Inc. (SWA) has providedmore » certification and consulting services for hundreds of housing projects and has accrued a large pool of data that describe multifamily and attached single-family home characteristics. The U.S. Department of Energy’s Building America research team Consortium for Advanced Residential Buildings (CARB) compiled and analyzed these data to outline the characteristics of low-load dwellings such as the heating and cooling design loads.« less

Frequency Characteristics of the MAGLEV Double-layered Propulsion Coil

NASA Astrophysics Data System (ADS)

Ema, Satoshi

The MAGLEV (magnetically levitated vehicle) is now well along in development testing at Yamanashi Test Line. The MAGLEV power source needs to supply a variable voltage and variable frequency to propulsion coils, which installed on outdoor guideway. The output voltage of the electric power converter contains many higher harmonics, which causes many troubles such as inductive interference. Accordingly, it is necessary to clarify the frequency characteristics of the propulsion coils and the power feeding circuit. In view of this situation, experiments and the theoretical analysis concerning the frequency characteristics of the propulsion coils with single-layer arrangement and the power feeding circuit at Miyazaki Test Line had been performed by the author. But the arrangement of the propulsion coils had been changed in Yamanashi Test Line from the single-layered coils to the double-layered coils for the stability of the super-conducting magnet on board. Thus, experiments and investigations concerning the frequency characteristics(resonance characteristics)of the propulsion coils with double-layer arrangement at Yamanashi Test Line have been performed but a theoretical analysis had not been done enough. A theoretical analysis was therefore done in this paper by applying the inverted L equivalent circuit with mutual inductance and capacitance to the propulsion coil, from which the positive and zero phase characteristics of the double-layered propulsion coils were analyzed.

Properties and Performance Attributes of Novel Co-extruded Polyolefin Battery Separator Materials. Part 2; Electrical Properties

NASA Technical Reports Server (NTRS)

Baldwin, Richard S.

2013-01-01

As NASA prepares for its next era of manned spaceflight missions, advanced energy storage technologies are being developed and evaluated to address and enhance future mission needs and technical requirements. Cell-level components for advanced lithium-ion batteries possessing higher energy, more reliable performance and enhanced, inherent safety characteristics have been under development within the NASA infrastructure. A key component for safe and reliable cell performance is the cell separator, which separates the two energetic electrodes and functions to inhibit the occurrence of an internal short circuit but preserves an ionic current. Recently, a new generation of co-extruded separator films has been developed by ExxonMobil Chemical and introduced into their battery separator product portfolio. Several grades of this new separator material were evaluated with respect to dynamic mechanical properties and safety-related performance attributes, and the results of these evaluations were previously reported in "Part 1: Mechanical Properties" of this publication. This current paper presents safety-related performance results for these novel materials obtained by employing a complementary experimental methodology, which involved the analysis of separator impedance characteristics as a function of temperature. The experimental results from this study are discussed with respect to potential cell safety enhancement for future aerospace as well as for terrestrial energy storage needs, and they are compared with pertinent mechanical properties of these materials, as well as with current state-of-the practice separator materials.

Core competencies for scientific editors of biomedical journals: consensus statement.

PubMed

Moher, David; Galipeau, James; Alam, Sabina; Barbour, Virginia; Bartolomeos, Kidist; Baskin, Patricia; Bell-Syer, Sally; Cobey, Kelly D; Chan, Leighton; Clark, Jocalyn; Deeks, Jonathan; Flanagin, Annette; Garner, Paul; Glenny, Anne-Marie; Groves, Trish; Gurusamy, Kurinchi; Habibzadeh, Farrokh; Jewell-Thomas, Stefanie; Kelsall, Diane; Lapeña, José Florencio; MacLehose, Harriet; Marusic, Ana; McKenzie, Joanne E; Shah, Jay; Shamseer, Larissa; Straus, Sharon; Tugwell, Peter; Wager, Elizabeth; Winker, Margaret; Zhaori, Getu

2017-09-11

Scientific editors are responsible for deciding which articles to publish in their journals. However, we have not found documentation of their required knowledge, skills, and characteristics, or the existence of any formal core competencies for this role. We describe the development of a minimum set of core competencies for scientific editors of biomedical journals. The 14 key core competencies are divided into three major areas, and each competency has a list of associated elements or descriptions of more specific knowledge, skills, and characteristics that contribute to its fulfillment. We believe that these core competencies are a baseline of the knowledge, skills, and characteristics needed to perform competently the duties of a scientific editor at a biomedical journal.

Aerodynamic Characteristics and Glide-Back Performance of Langley Glide-Back Booster

NASA Technical Reports Server (NTRS)

Pamadi, Bandu N.; Covell, Peter F.; Tartabini, Paul V.; Murphy, Kelly J.

2004-01-01

NASA-Langley Research Center is conducting system level studies on an-house concept of a small launch vehicle to address NASA's needs for rapid deployment of small payloads to Low Earth Orbit. The vehicle concept is a three-stage system with a reusable first stage and expendable upper stages. The reusable first stage booster, which glides back to launch site after staging around Mach 3 is named the Langley Glide-Back Booster (LGBB). This paper discusses the aerodynamic characteristics of the LGBB from subsonic to supersonic speeds, development of the aerodynamic database and application of this database to evaluate the glide back performance of the LGBB. The aerodynamic database was assembled using a combination of wind tunnel test data and engineering level analysis. The glide back performance of the LGBB was evaluated using a trajectory optimization code and subject to constraints on angle of attack, dynamic pressure and normal acceleration.

Prediction of multi performance characteristics of wire EDM process using grey ANFIS

NASA Astrophysics Data System (ADS)

Kumanan, Somasundaram; Nair, Anish

2017-09-01

Super alloys are used to fabricate components in ultra-supercritical power plants. These hard to machine materials are processed using non-traditional machining methods like Wire cut electrical discharge machining and needs attention. This paper details about multi performance optimization of wire EDM process using Grey ANFIS. Experiments are designed to establish the performance characteristics of wire EDM such as surface roughness, material removal rate, wire wear rate and geometric tolerances. The control parameters are pulse on time, pulse off time, current, voltage, flushing pressure, wire tension, table feed and wire speed. Grey relational analysis is employed to optimise the multi objectives. Analysis of variance of the grey grades is used to identify the critical parameters. A regression model is developed and used to generate datasets for the training of proposed adaptive neuro fuzzy inference system. The developed prediction model is tested for its prediction ability.

The role of the Technical Review Panel of the Global Fund to Fight HIV/AIDS, Tuberculosis and Malaria: an analysis of grant recommendations.

PubMed

Schmidt-Traub, Guido

2018-04-01

The independent Technical Review Panel (TRP) of the Global Fund to Fight HIV/AIDS, Tuberculosis and Malaria is a unique mechanism to review funding proposals and to provide recommendations on their funding. Its functioning and performance have received little attention in the scientific literature. We aimed to identify predictors for TRP recommendations, whether these were in line with the Global Fund's ambition to give priority to countries most in need, and whether they correlated with grant performance. We combined data on proposals and applications under the Rolling Continuation Channel, TRP recommendations and grant implementation during the rounds-based mechanism (2002-2010) with country characteristics. Ordered logistic and OLS regressions were used to identify predictors for per-capita funding requests, TRP recommendations, Global Fund funding and grant performance ratings. We tested for financial suppression of large funding proposals and whether fragile or English-speaking countries performed differently from other countries. We found that funding requests and TRP recommendations were consistent with disease burden, but independent of other country characteristics. Countries with larger populations requested less funding per capita, but there is no evidence of financial suppression by the TRP. Proposals from fragile countries were as likely to be recommended as proposals from other countries, and resulting grants performed equally well except for lower performance of HIV/AIDS grants. English-speaking countries obtained more funding for TB and malaria than other countries. In conclusion, the independent TRP acted in line with the guiding principles of the Global Fund to direct funding to countries most in need without ex ante country allocation. The Global Fund appears to have promoted learning on how to design and implement large-scale programs in fragile and non-fragile countries. Other pooled financing mechanisms may consider TRP operating principles to generate high-quality demand, to promote learning and to direct resources to countries most in need.

Characteristics and Performance of Existing Load Disaggregation Technologies

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mayhorn, Ebony T.; Sullivan, Greg P.; Butner, Ryan S.

2015-04-10

Non-intrusive load monitoring (NILM) or non-intrusive appliance load monitoring (NIALM) is an analytic approach to disaggregate building loads based on a single metering point. This advanced load monitoring and disaggregation technique has the potential to provide an alternative solution to high-priced traditional sub-metering and enable innovative approaches for energy conservation, energy efficiency, and demand response. However, since the inception of the concept in the 1980’s, evaluations of these technologies have focused on reporting performance accuracy without investigating sources of inaccuracies or fully understanding and articulating the meaning of the metrics used to quantify performance. As a result, the market for,more » as well as, advances in these technologies have been slowly maturing.To improve the market for these NILM technologies, there has to be confidence that the deployment will lead to benefits. In reality, every end-user and application that this technology may enable does not require the highest levels of performance accuracy to produce benefits. Also, there are other important characteristics that need to be considered, which may affect the appeal of NILM products to certain market targets (i.e. residential and commercial building consumers) and the suitability for particular applications. These characteristics include the following: 1) ease of use, the level of expertise/bandwidth required to properly use the product; 2) ease of installation, the level of expertise required to install along with hardware needs that impact product cost; and 3) ability to inform decisions and actions, whether the energy outputs received by end-users (e.g. third party applications, residential users, building operators, etc.) empower decisions and actions to be taken at time frames required for certain applications. Therefore, stakeholders, researchers, and other interested parties should be kept abreast of the evolving capabilities, uses, and characteristics of NILM that make them attractive for certain building environments and different classes of end-users. The intent of this report is to raise awareness of trending NILM approaches. Additionally, three existing technologies were acquired and evaluated using the Residential Building Stock Assessment (RBSA) owner-occupied test bed operated by the Northwest Energy Efficiency Alliance (NEEA) to understand performance accuracy of current NILM products under realistic conditions. Based on this field study experience, the characteristics exhibited by the NILM products included in the assessment are also discussed in this report in terms of ease of use, ease of installation, ability to inform decisions and actions. Results of the analysis performed to investigate the accuracy of the participating NILM products in estimating energy use of individual appliances are also presented.« less

Dynamics of career choice among students in undergraduate medical courses. A BEME systematic review: BEME Guide No. 33.

PubMed

Querido, Sophie J; Vergouw, David; Wigersma, Lode; Batenburg, Ronald S; De Rond, Marlies E J; Ten Cate, Olle T J

2016-01-01

Due to the lack of a theoretically embedded overview of the recent literature on medical career decision-making, this study provides an outline of these dynamics. Since differences in educational routes to the medical degree likely affect career choice dynamics, this study focuses on medical career decision-making in educational systems with a Western European curriculum structure. A systematic search of electronic databases (Medline, Embase) was conducted from January 2008 to November 2014. A panel of seven independent reviewers performed the data extraction, quality assessment and data synthesis using the Bland-Meurer model of medical specialty choice as a reference. Fifty-seven studies met the inclusion criteria for the review. Factors associated with specialty preference or career choice can be classified in five main categories: (1) medical school characteristics (e.g., curriculum structure), (2) student characteristics (e.g., age, personality), (3) student values (e.g., personal preference), (4) career needs to be satisfied (e.g., expected income, status, and work-life balance), and (5) perception of specialty characteristics (e.g., extracurricular or curricular experiences). Especially career needs and perceptions of specialty characteristics are often associated with medical career decision-making. Our results support that medical career decisions are formed by a matching of perceptions of specialty characteristics with personal needs. However, the process of medical career decision-making is not yet fully understood. Besides identifying possible predictors, future research should focus on detecting interrelations between hypothesized predictors and identify the determinants and interrelations at the various stages of the medical career decision-making process.

Characteristics and Challenges of Open-Water Swimming Performance: A Review.

PubMed

Baldassarre, Roberto; Bonifazi, Marco; Zamparo, Paola; Piacentini, Maria Francesca

2017-11-01

Although the popularity of open-water swimming (OWS) events has significantly increased in the last decades, specific studies regarding performance of elite or age-group athletes in these events are scarce. To analyze the existing literature on OWS. Relevant literature was located via computer-generated citations. During August 2016, online computer searches on PubMed and Scopus databases were conducted to locate published research. The number of participants in ultraendurance swimming events has substantially increased in the last 10 y. In elite athletes there is a higher overall competitive level of women than of men. The body composition of female athletes (different percentage and distribution of fat tissue) shows several advantages (more buoyancy and less drag) in aquatic conditions that determine the small difference between males and females. The main physiological characteristics of open-water swimmers (OW swimmers) are the ability to swim at high percentage of [Formula: see text] (80-90%) for many hours. Furthermore, to sustain high velocity for many hours, endurance swimmers need a high propelling efficiency and a low energy cost. Open-water races may be characterized by extreme environmental conditions (water temperature, tides, currents, and waves) that have an overall impact on performance, influencing tactics and pacing. Future studies are needed to study OWS in both training and competition.

Characteristics of Effective Mentorship for Academic Surgeons: A Grounded Theory Model.

PubMed

Cochran, Amalia; Elder, William B; Neumayer, Leigh A

2017-08-23

The authors sought to describe characteristics of effective mentoring relationships in academic surgery based upon lived experiences of mid-career and senior female academic surgeons. Prior qualitative work describes characteristics of successful mentoring relationships. However, no model exists of effective mentorship that is specific to academic surgery. The authors conducted in-depth interviews with mid-career and senior female US academic surgeons about the impact of mentoring on professional development during 2014 and 2015. Purposive selection aimed to maximize institutional, specialty, years in career, and racial diversity. Grounded theory method was used to generate a conceptual model of effective mentoring relationships. Data saturation occurred following 15 interviews. Interviewees described the need for multiple mentors over time with each mentor addressing a unique domain. Interviewees suggested that mentees should seek mentors who will serve as strategic advisors, who will be unselfish, and who engage with diverse mentees. This study identified a need for multiple mentors across time and disciplines, and identified 3 key characteristics of effective mentoring relationships in academic surgery. Future work in this area should generate an operational definition of mentorship that supports quantitative evaluation of mentor and mentoring panel performance.

Influence of feedback characteristics on perceived learning value of feedback in clerkships: does culture matter?

PubMed

Suhoyo, Yoyo; Van Hell, Elisabeth A; Kerdijk, Wouter; Emilia, Ova; Schönrock-Adema, Johanna; Kuks, Jan B M; Cohen-Schotanus, Janke

2017-04-05

Various feedback characteristics have been suggested to positively influence student learning. It is not clear how these feedback characteristics contribute to students' perceived learning value of feedback in cultures classified low on the cultural dimension of individualism and high on power distance. This study was conducted to validate the influence of five feedback characteristics on students' perceived learning value of feedback in an Indonesian clerkship context. We asked clerks in Neurology (n = 169) and Internal Medicine (n = 132) to assess on a 5-point Likert scale the learning value of the feedback they received. We asked them to record whether the feedback provider (1) informed the student what went well, (2) mentioned which aspects of performance needed improvement, (3) compared the student's performance to a standard, (4) further explained or demonstrated the correct performance, and (5) prepared an action plan with the student to improve performance. Data were analyzed using multilevel regression. A total of 250 students participated in this study, 131 from Internal Medicine (response rate 99%) and 119 from Neurology (response rate 70%). Of these participants, 225 respondents (44% males, 56% females) completed the form and reported 889 feedback moments. Students perceived feedback as more valuable when the feedback provider mentioned their weaknesses (β = 0.153, p < 0.01), compared their performance to a standard (β = 0.159, p < 0.01), explained or demonstrated the correct performance (β = 0.324, p < 0.001) and prepared an action plan with the student (β =0.496, p < 0.001). Appraisal of good performance did not influence the perceived learning value of feedback. No gender differences were found for perceived learning value. In Indonesia, we could validate four out of the five characteristics for effective feedback. We argue that our findings relate to culture, in particular to the levels of individualism and power distance. The recognized characteristics of what constitutes effective feedback should be validated across cultures.

CEOs and CFOs express concern about materials management.

PubMed

Kowalski, J C

1998-05-01

In a recent survey, CEOs and CFOs expressed concern regarding the effectiveness of their materials management departments. Both groups of executives would like to see more improvement in their materials managers' supply expense reduction efforts and leadership skills. More than a third of CFOs are even considering outsourcing the materials management function. Both CEOs and CFOs did admit, however, they needed to learn more about materials management, and both groups of executives could lend their authority to materials management programs to ensure their success. CEOs and CFOs need to reach consensus regard materials management priorities, performance levels, and professional characteristics and desired skills. They also should hold materials managers accountable for operations they can and should be managing by using performance-based compensation.

Sensor Systems for Prognostics and Health Management

PubMed Central

Cheng, Shunfeng; Azarian, Michael H.; Pecht, Michael G.

2010-01-01

Prognostics and health management (PHM) is an enabling discipline consisting of technologies and methods to assess the reliability of a product in its actual life cycle conditions to determine the advent of failure and mitigate system risk. Sensor systems are needed for PHM to monitor environmental, operational, and performance-related characteristics. The gathered data can be analyzed to assess product health and predict remaining life. In this paper, the considerations for sensor system selection for PHM applications, including the parameters to be measured, the performance needs, the electrical and physical attributes, reliability, and cost of the sensor system, are discussed. The state-of-the-art sensor systems for PHM and the emerging trends in technologies of sensor systems for PHM are presented. PMID:22219686

Sensor systems for prognostics and health management.

PubMed

Cheng, Shunfeng; Azarian, Michael H; Pecht, Michael G

2010-01-01

Prognostics and health management (PHM) is an enabling discipline consisting of technologies and methods to assess the reliability of a product in its actual life cycle conditions to determine the advent of failure and mitigate system risk. Sensor systems are needed for PHM to monitor environmental, operational, and performance-related characteristics. The gathered data can be analyzed to assess product health and predict remaining life. In this paper, the considerations for sensor system selection for PHM applications, including the parameters to be measured, the performance needs, the electrical and physical attributes, reliability, and cost of the sensor system, are discussed. The state-of-the-art sensor systems for PHM and the emerging trends in technologies of sensor systems for PHM are presented.

Historical overview of V/STOL aircraft technology

NASA Technical Reports Server (NTRS)

Anderson, S. B.

1981-01-01

The requirements for satisfactory characteristics in several key technology areas are discussed and a review is made of various V/STOL aircraft for the purpose of assessing the success or failure of each design in meeting design requirements. Special operating techniques were developed to help circumvent deficiencies. For the most part performance and handling qualities limitations restricted operational evaluations. Flight operations emphasized the need for good STOL performance, good handling qualities, and stability and control augmentation. The majority of aircraft suffered adverse ground effects.

Quiet short-haul research aircraft familiarization document, revision 1

NASA Technical Reports Server (NTRS)

Eppel, J. C.

1981-01-01

The design features and general characteristics of the Quiet Short Haul Research Aircraft are described. Aerodynamic characteristics and performance are discussed based on predictions and early flight test data. Principle airplane systems, including the airborne data acquisition system, are also described. The aircraft was designed and built to fulfill the need for a national research facility to explore the use of upper surface blowing, propulsive lift technology in providing short takeoff and landing capability, and perform advanced experiments in various technical disciplines such as aerodynamics, propulsion, stability and control, handling qualities, avionics and flight control systems, trailing vortex phenomena, acoustics, structure and loads, operating systems, human factors, and airworthiness/certification criteria. An unusually austere approach using experimental shop practices resulted in a low cost and high research capability.

Quiet short-haul research aircraft familiarization document. [STOL

NASA Technical Reports Server (NTRS)

Mccracken, R. C.

1979-01-01

The design features and general characteristics of the NASA Quiet Short-Haul Research Aircraft are described. Aerodynamic characteristics and performance are discussed based on predictions and early flight-test data. Principle airplane systems, including the airborne data-acquisition system, are also described. The aircraft was designed and built to fulfill the need for a national research facility to explore the use of upper surface-blowing propulsive-lift technology in providing short takeoff and landing capability, and perform advanced experiments in various technical disciplines such as aerodynamics, propulsion, stability and control, handling qualities, avionics and flight-control systems, trailing-vortex phenomena, acoustics, structure and loads, operating systems, human factors, and airworthiness/certification criteria. An unusually austere approach using experimental shop practices resulted in a low cost and high research capability.

The "Freaky" Kid Who Needs Help: His Characteristics, His Alternatives.

ERIC Educational Resources Information Center

Liston, Walter

This paper discusses the role of the free clinic in helping youth. It examines the activities of the Health Emergency Aid Dispensary (HEAD) in New Orleans, a free clinic that: (1) performs pregnancy tests; syphillis and gonorrhea tests, urinalysis for kidney ailments, PAP smears; (2) prescribes birth control; and provides rapid consultation of a…

Students' Ability in Science: Results from a Test Development Study

ERIC Educational Resources Information Center

Akkanat, Cigdem; Gokdere, Murat

2017-01-01

Student's ability to use and manipulate scientific concepts has been widely explored; however there is still a need to define the characteristics and nature of science ability. Also, the tests and performance scales that require minimal conceptual knowledge to measure this ability are relatively less common. The aim of this study was to develop an…

Design and fabrication of a four-man capacity urine wick evaporator system

NASA Technical Reports Server (NTRS)

1979-01-01

The integrated system was tested to determine the performance characteristics and limitations of the dual catalyst concept. The primary objective of the dual catalyst concept is to remove ammonia and other noxious substances in the gas phase and thereby eliminate the need for and current practice of chemically or electrochemically pretreating urine prior to distillation.

Adult English as a Second Language Students in the United States: Learner Characteristics, Goals, and Academic Writing Performance

ERIC Educational Resources Information Center

Lambert, Olga Demin

2009-01-01

Adult English as a second language (ESL) students learning English outside of traditional academic settings are an understudied population of second language learners. The purpose of the research reported here is to contribute to meeting the instructional needs of these students more effectively by investigating the relationships between their…

Transformational leadership and safety performance among nurses: the mediating role of knowledge-related job characteristics.

PubMed

Lievens, Ilse; Vlerick, Peter

2014-03-01

To report the impact of transformational leadership on two dimensions of nurses' safety performance (i.e. safety compliance and safety participation) and to study the mediating role of knowledge-related job characteristics in this relationship. Safety performance refers to the behaviours that employees exhibit to adhere to safety guidelines and to promote health and safety at their workplace. Nurses' safety performance is a major challenge for healthcare settings, urging the need to identify the key determinants and psychological mechanisms that influence it. A cross-sectional survey study. The study was carried out in September 2010 in a large Belgian hospital. We used self-administered questionnaires; 152 nurses participated. The hypotheses were tested using hierarchical regression analyses. In line with our first hypothesis, the results show that transformational leadership exerted a significant positive impact on both dimensions of nurses' safety performance. This positive relation was mediated by knowledge-related job characteristics, supporting our second hypothesis. Head nurses' transformational leadership can enhance nurses' compliance with and participation in safety. Furthermore, transformational head nurses are able to influence the perception that their nurses have about the kind and amount of knowledge in their job, which can also lead to increases in both dimensions of nurses' safety performance. This study therefore demonstrates the key impact that transformational head nurses have, both directly and indirectly, on the safety performance of their nurses. © 2013 John Wiley & Sons Ltd.

Consumers' perception of organic product characteristics. A review.

PubMed

Schleenbecker, Rosa; Hamm, Ulrich

2013-12-01

Consumer interest in organic products is growing alongside a diversification of the supply. In order to serve consumers actual needs and wants regarding organic products, those involved in the market need to be informed about consumers' perception of organic products. Therefore, the state of research as regards consumers' perception of organic product characteristics, including basic and additional characteristics, product labelling, product innovations and the range of products on the market is displayed in this contribution. A comprehensive literature analysis was performed uncovering not only the state of the art in the field including employed methodology, but also research needs. Most studies are published on consumers' perception of organic products' design and labelling. A trend towards the so called 'organic-plus' positioning can be perceived, with many consumers expecting an extensive orientation towards sustainability. The diversity of product labels features prominently in related studies. The demand for reliable information, as well as the low degree of awareness of many labels amongst consumers becomes clear in these studies. To date, few results are available on consumers' perception of packaging and design of organic products, and even fewer for consumers' perception of range design. Both consumers' perception of organic product innovation and valued added services are untouched so far. Copyright © 2013 Elsevier Ltd. All rights reserved.

Relationship between quality of care and choice of clinical computing system: retrospective analysis of family practice performance under the UK's quality and outcomes framework

PubMed Central

Kontopantelis, Evangelos; Buchan, Iain; Reeves, David; Checkland, Kath; Doran, Tim

2013-01-01

Objectives To investigate the relationship between performance on the UK Quality and Outcomes Framework pay-for-performance scheme and choice of clinical computer system. Design Retrospective longitudinal study. Setting Data for 2007–2008 to 2010–2011, extracted from the clinical computer systems of general practices in England. Participants All English practices participating in the pay-for-performance scheme: average 8257 each year, covering over 99% of the English population registered with a general practice. Main outcome measures Levels of achievement on 62 quality-of-care indicators, measured as: reported achievement (levels of care after excluding inappropriate patients); population achievement (levels of care for all patients with the relevant condition) and percentage of available quality points attained. Multilevel mixed effects multiple linear regression models were used to identify population, practice and clinical computing system predictors of achievement. Results Seven clinical computer systems were consistently active in the study period, collectively holding approximately 99% of the market share. Of all population and practice characteristics assessed, choice of clinical computing system was the strongest predictor of performance across all three outcome measures. Differences between systems were greatest for intermediate outcomes indicators (eg, control of cholesterol levels). Conclusions Under the UK's pay-for-performance scheme, differences in practice performance were associated with the choice of clinical computing system. This raises the question of whether particular system characteristics facilitate higher quality of care, better data recording or both. Inconsistencies across systems need to be understood and addressed, and researchers need to be cautious when generalising findings from samples of providers using a single computing system. PMID:23913774

STGSTK- PREDICTING MULTISTAGE AXIAL-FLOW COMPRESSOR PERFORMANCE BY A MEANLINE STAGE-STACKING METHOD

NASA Technical Reports Server (NTRS)

Steinke, R. J.

1994-01-01

The STGSTK computer program was developed for predicting the off-design performance of multistage axial-flow compressors. The axial-flow compressor is widely used in aircraft engines. In addition to its inherent advantage of high mass flow per frontal area, it can exhibit very good aerodynamic performance. However, good aerodynamic performance over an acceptable range of operating conditions is not easily attained. STGSTK provides an analytical tool for the development of new compressor designs. The simplicity of a one-dimensional compressible flow model enables the stage-stacking method used in STGSTK to have excellent convergence properties and short computer run times. Also, the simplicity of the model makes STGSTK a manageable code that eases the incorporation, or modification, of empirical correlations directly linked to test data. Thus, the user can adapt the code to meet varying design needs. STGSTK uses a meanline stage-stacking method to predict off-design performance. Stage and cumulative compressor performance is calculated from representative meanline velocity diagrams located at rotor inlet and outlet meanline radii. STGSTK includes options for the following: 1) non-dimensional stage characteristics may be input directly or calculated from stage design performance input, 2) stage characteristics may be modified for off-design speed and blade reset, and 3) rotor design deviation angle may be modified for off-design flow, speed, and blade setting angle. Many of the code's options use correlations that are normally obtained from experimental data. The STGSTK user may modify these correlations as needed. This program is written in FORTRAN IV for batch execution and has been implemented on an IBM 370 series computer with a central memory requirement of approximately 85K of 8 bit bytes. STGSTK was developed in 1982.

Comparing Performance of Combinations of Shear Wave Elastography and B-Mode Ultrasound in Diagnosing Breast Masses: Is It Influenced by Mass Size?

PubMed

Cong, Rui; Li, Jing; Wang, Xuejiao

2017-10-01

We determined the diagnostic performance of combinations of shear wave elastography (SWE) and B-mode ultrasound (US) in differentiating malignant from benign breast masses, and we investigated whether performance is affected by mass size. In this prospective study of 315 consecutive patients with 326 breast masses, US and SWE were performed before biopsy. Masses were categorized into two subgroups on the basis of mass size (≤15 mm and >15 mm), and the optimal thresholds for the SWE parameters were determined for each subgroup using receiver operating characteristic curves. The combination proposed here achieved an area under the receiver operating characteristic curve of 0.943, 95.00% sensitivity and 81.18% specificity, which approximated the diagnostic performance of US alone. The performance of the combinations using the subgroups' thresholds did not differ significantly from those based on the entire study group's thresholds, but the optimal thresholds were higher in the subgroup of larger masses. Further research is needed to determine whether mass size affects the performance of combinations of SWE and US. Copyright © 2017 World Federation for Ultrasound in Medicine & Biology. Published by Elsevier Inc. All rights reserved.

Non-cognitive Characteristics of Gifted Students With Learning Disabilities: An In-depth Systematic Review

PubMed Central

Beckmann, Else; Minnaert, Alexander

2018-01-01

Gifted students who also have learning disabilities (G/LD) are often overlooked when students are assessed either for giftedness or specific learning disabilities. The cognitive and non-cognitive characteristics of these G/LD students are habitually discussed only briefly alongside identification and intervention issues and, beyond that, the relevance of non-cognitive characteristics is often left unconsidered. Accordingly, this study aims to conduct an in-depth review of the non-cognitive characteristics of these students for identification and intervention purposes. Detailed analysis was performed on 23 publications. High levels of negative emotions, low self-perception, and adverse interpersonal relationships, as well as high levels of motivation, coping skills and perseverance were found among these students. A common characteristic was a high degree of frustration with the academic situation. The study reveals that these students show considerably duality in their non-cognitive characteristics which requires tailored counseling skills to provide effective support for their learning needs. PMID:29731728

Non-cognitive Characteristics of Gifted Students With Learning Disabilities: An In-depth Systematic Review.

PubMed

Beckmann, Else; Minnaert, Alexander

2018-01-01

Gifted students who also have learning disabilities (G/LD) are often overlooked when students are assessed either for giftedness or specific learning disabilities. The cognitive and non-cognitive characteristics of these G/LD students are habitually discussed only briefly alongside identification and intervention issues and, beyond that, the relevance of non-cognitive characteristics is often left unconsidered. Accordingly, this study aims to conduct an in-depth review of the non-cognitive characteristics of these students for identification and intervention purposes. Detailed analysis was performed on 23 publications. High levels of negative emotions, low self-perception, and adverse interpersonal relationships, as well as high levels of motivation, coping skills and perseverance were found among these students. A common characteristic was a high degree of frustration with the academic situation. The study reveals that these students show considerably duality in their non-cognitive characteristics which requires tailored counseling skills to provide effective support for their learning needs.

An initial study of voice characteristics of children using two different sound coding strategies in comparison to normal hearing children.

PubMed

Coelho, Ana Cristina; Brasolotto, Alcione Ghedini; Bevilacqua, Maria Cecília

2015-06-01

To compare some perceptual and acoustic characteristics of the voices of children who use the advanced combination encoder (ACE) or fine structure processing (FSP) speech coding strategies, and to investigate whether these characteristics differ from children with normal hearing. Acoustic analysis of the sustained vowel /a/ was performed using the multi-dimensional voice program (MDVP). Analyses of sequential and spontaneous speech were performed using the real time pitch. Perceptual analyses of these samples were performed using visual-analogic scales of pre-selected parameters. Seventy-six children from three years to five years and 11 months of age participated. Twenty-eight were users of ACE, 23 were users of FSP, and 25 were children with normal hearing. Although both groups with CI presented with some deviated vocal features, the users of ACE presented with voice quality more like children with normal hearing than the users of FSP. Sound processing of ACE appeared to provide better conditions for auditory monitoring of the voice, and consequently, for better control of the voice production. However, these findings need to be further investigated due to the lack of comparative studies published to understand exactly which attributes of sound processing are responsible for differences in performance.

Cognitive and physical functions related to the level of supervision and dependence in the toileting of stroke patients.

PubMed

Sato, Atsushi; Okuda, Yutaka; Fujita, Takaaki; Kimura, Norihiko; Hoshina, Noriyuki; Kato, Sayaka; Tanaka, Shigenari

2016-01-01

This study aimed to clarify which cognitive and physical factors are associated with the need for toileting assistance in stroke patients and to calculate cut-off values for discriminating between independent supervision and dependent toileting ability. This cross-sectional study included 163 first-stroke patients in nine convalescent rehabilitation wards. Based on their FIM Ⓡ instrument score for toileting, the patients were divided into an independent-supervision group and a dependent group. Multiple logistic regression analysis and receiver operating characteristic analysis were performed to identify factors related to toileting performance. The Minimental State Examination (MMSE); the Stroke Impairment Assessment Set (SIAS) score for the affected lower limb, speech, and visuospatial functions; and the Functional Assessment for Control of Trunk (FACT) were analyzed as independent variables. The multiple logistic regression analysis showed that the FIM Ⓡ instrument score for toileting was associated with the SIAS score for the affected lower limb function, MMSE, and FACT. On receiver operating characteristic analysis, the SIAS score for the affected lower limb function cut-off value was 8/7 points, the MMSE cut-off value was 25/24 points, and the FACT cut-off value was 14/13 points. Affected lower limb function, cognitive function, and trunk function were related with the need for toileting assistance. These cut-off values may be useful for judging whether toileting assistance is needed in stroke patients.

Relaxation approximations to second-order traffic flow models by high-resolution schemes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nikolos, I.K.; Delis, A.I.; Papageorgiou, M.

2015-03-10

A relaxation-type approximation of second-order non-equilibrium traffic models, written in conservation or balance law form, is considered. Using the relaxation approximation, the nonlinear equations are transformed to a semi-linear diagonilizable problem with linear characteristic variables and stiff source terms with the attractive feature that neither Riemann solvers nor characteristic decompositions are in need. In particular, it is only necessary to provide the flux and source term functions and an estimate of the characteristic speeds. To discretize the resulting relaxation system, high-resolution reconstructions in space are considered. Emphasis is given on a fifth-order WENO scheme and its performance. The computations reportedmore » demonstrate the simplicity and versatility of relaxation schemes as numerical solvers.« less

An Examination of School Choice and Fifth Grade Science Achievement in Florida

NASA Astrophysics Data System (ADS)

McLarnon, Tara Lynn

Over the past 20 years, a movement to offer greater access and choice in public education has begun to challenge the traditional attendance boundary school system. Public school choice provides an opportunity for parents who do not have the resources to change attendance boundaries but who want additional public school options. Proponents argue that increased competition incentivizes all schools to improve performance. The purpose of this study was to determine whether there were any potential relationships among school choice options and other inputs such as student characteristics when looking at student science achievement. Based on an education production function model, the study focused on the specific output of performance. A conceptual model looking at common inputs related to the outcome of student performance, identified five groups of inputs: school type, student characteristics, learning needs, school characteristics, and teacher quality. Rather than look across states, where policies affecting student performance differ, this study looked exclusively at one large state population. Subjects of the study were fifth grade students in the state of Florida. Utilizing three years of state science assessment data, the roles of school type, selected student demographics, and ELL status were examined using logistic regression and ordinary least squares analysis. Results indicated that, while some subpopulations of students performed better in different school types, school type alone was not a strong predictor of student science achievement.

Performance modeling for large database systems

NASA Astrophysics Data System (ADS)

Schaar, Stephen; Hum, Frank; Romano, Joe

1997-02-01

One of the unique approaches Science Applications International Corporation took to meet performance requirements was to start the modeling effort during the proposal phase of the Interstate Identification Index/Federal Bureau of Investigations (III/FBI) project. The III/FBI Performance Model uses analytical modeling techniques to represent the III/FBI system. Inputs to the model include workloads for each transaction type, record size for each record type, number of records for each file, hardware envelope characteristics, engineering margins and estimates for software instructions, memory, and I/O for each transaction type. The model uses queuing theory to calculate the average transaction queue length. The model calculates a response time and the resources needed for each transaction type. Outputs of the model include the total resources needed for the system, a hardware configuration, and projected inherent and operational availability. The III/FBI Performance Model is used to evaluate what-if scenarios and allows a rapid response to engineering change proposals and technical enhancements.

Integrating Reconfigurable Hardware-Based Grid for High Performance Computing

PubMed Central

Dondo Gazzano, Julio; Sanchez Molina, Francisco; Rincon, Fernando; López, Juan Carlos

2015-01-01

FPGAs have shown several characteristics that make them very attractive for high performance computing (HPC). The impressive speed-up factors that they are able to achieve, the reduced power consumption, and the easiness and flexibility of the design process with fast iterations between consecutive versions are examples of benefits obtained with their use. However, there are still some difficulties when using reconfigurable platforms as accelerator that need to be addressed: the need of an in-depth application study to identify potential acceleration, the lack of tools for the deployment of computational problems in distributed hardware platforms, and the low portability of components, among others. This work proposes a complete grid infrastructure for distributed high performance computing based on dynamically reconfigurable FPGAs. Besides, a set of services designed to facilitate the application deployment is described. An example application and a comparison with other hardware and software implementations are shown. Experimental results show that the proposed architecture offers encouraging advantages for deployment of high performance distributed applications simplifying development process. PMID:25874241

Management and leadership competence in hospitals: a systematic literature review.

PubMed

Pihlainen, Vuokko; Kivinen, Tuula; Lammintakanen, Johanna

2016-01-01

Purpose - The purpose of this study is to describe the characteristics of management and leadership competence of health-care leaders and managers, especially in the hospital environment. Health-care leaders and managers in this study were both nursing and physician managers. Competence was assessed by evaluating the knowledge, skills, attitudes and abilities that enable management and leadership tasks. Design/methodology/approach - A systematic literature review was performed to find articles that identify and describe the characteristics of management and leadership competence. Searches of electronic databases were conducted using set criteria for article selection. Altogether, 13 papers underwent an inductive content analysis. Findings - The characteristics of management and leadership competence were categorized into the following groups: health-care-context-related, operational and general. Research limitations/implications - One limitation of the study is that only 13 articles were found in the literature regarding the characteristics of management and leadership competence. However, the search terms were relevant, and the search process was endorsed by an information specialist. The study findings imply the need to shift away from the individual approach to leadership and management competence. Management and leadership need to be assessed more frequently from a holistic perspective, and not merely on the basis of position in the organizational hierarchy or of profession in health care. Originality/value - The authors' evaluation of the characteristics of management and leadership competence without a concentrated profession-based approach is original.

Development and Application of an Integrated Approach toward NASA Airspace Systems Research

NASA Technical Reports Server (NTRS)

Barhydt, Richard; Fong, Robert K.; Abramson, Paul D.; Koenke, Ed

2008-01-01

The National Aeronautics and Space Administration's (NASA) Airspace Systems Program is contributing air traffic management research in support of the 2025 Next Generation Air Transportation System (NextGen). Contributions support research and development needs provided by the interagency Joint Planning and Development Office (JPDO). These needs generally call for integrated technical solutions that improve system-level performance and work effectively across multiple domains and planning time horizons. In response, the Airspace Systems Program is pursuing an integrated research approach and has adapted systems engineering best practices for application in a research environment. Systems engineering methods aim to enable researchers to methodically compare different technical approaches, consider system-level performance, and develop compatible solutions. Systems engineering activities are performed iteratively as the research matures. Products of this approach include a demand and needs analysis, system-level descriptions focusing on NASA research contributions, system assessment and design studies, and common systemlevel metrics, scenarios, and assumptions. Results from the first systems engineering iteration include a preliminary demand and needs analysis; a functional modeling tool; and initial system-level metrics, scenario characteristics, and assumptions. Demand and needs analysis results suggest that several advanced concepts can mitigate demand/capacity imbalances for NextGen, but fall short of enabling three-times current-day capacity at the nation s busiest airports and airspace. Current activities are focusing on standardizing metrics, scenarios, and assumptions, conducting system-level performance assessments of integrated research solutions, and exploring key system design interfaces.

Design Characteristics Influence Performance of Clinical Prediction Rules in Validation: A Meta-Epidemiological Study

PubMed Central

Ban, Jong-Wook; Emparanza, José Ignacio; Urreta, Iratxe; Burls, Amanda

2016-01-01

Background Many new clinical prediction rules are derived and validated. But the design and reporting quality of clinical prediction research has been less than optimal. We aimed to assess whether design characteristics of validation studies were associated with the overestimation of clinical prediction rules’ performance. We also aimed to evaluate whether validation studies clearly reported important methodological characteristics. Methods Electronic databases were searched for systematic reviews of clinical prediction rule studies published between 2006 and 2010. Data were extracted from the eligible validation studies included in the systematic reviews. A meta-analytic meta-epidemiological approach was used to assess the influence of design characteristics on predictive performance. From each validation study, it was assessed whether 7 design and 7 reporting characteristics were properly described. Results A total of 287 validation studies of clinical prediction rule were collected from 15 systematic reviews (31 meta-analyses). Validation studies using case-control design produced a summary diagnostic odds ratio (DOR) 2.2 times (95% CI: 1.2–4.3) larger than validation studies using cohort design and unclear design. When differential verification was used, the summary DOR was overestimated by twofold (95% CI: 1.2 -3.1) compared to complete, partial and unclear verification. The summary RDOR of validation studies with inadequate sample size was 1.9 (95% CI: 1.2 -3.1) compared to studies with adequate sample size. Study site, reliability, and clinical prediction rule was adequately described in 10.1%, 9.4%, and 7.0% of validation studies respectively. Conclusion Validation studies with design shortcomings may overestimate the performance of clinical prediction rules. The quality of reporting among studies validating clinical prediction rules needs to be improved. PMID:26730980

Design Characteristics Influence Performance of Clinical Prediction Rules in Validation: A Meta-Epidemiological Study.

PubMed

Ban, Jong-Wook; Emparanza, José Ignacio; Urreta, Iratxe; Burls, Amanda

2016-01-01

Many new clinical prediction rules are derived and validated. But the design and reporting quality of clinical prediction research has been less than optimal. We aimed to assess whether design characteristics of validation studies were associated with the overestimation of clinical prediction rules' performance. We also aimed to evaluate whether validation studies clearly reported important methodological characteristics. Electronic databases were searched for systematic reviews of clinical prediction rule studies published between 2006 and 2010. Data were extracted from the eligible validation studies included in the systematic reviews. A meta-analytic meta-epidemiological approach was used to assess the influence of design characteristics on predictive performance. From each validation study, it was assessed whether 7 design and 7 reporting characteristics were properly described. A total of 287 validation studies of clinical prediction rule were collected from 15 systematic reviews (31 meta-analyses). Validation studies using case-control design produced a summary diagnostic odds ratio (DOR) 2.2 times (95% CI: 1.2-4.3) larger than validation studies using cohort design and unclear design. When differential verification was used, the summary DOR was overestimated by twofold (95% CI: 1.2 -3.1) compared to complete, partial and unclear verification. The summary RDOR of validation studies with inadequate sample size was 1.9 (95% CI: 1.2 -3.1) compared to studies with adequate sample size. Study site, reliability, and clinical prediction rule was adequately described in 10.1%, 9.4%, and 7.0% of validation studies respectively. Validation studies with design shortcomings may overestimate the performance of clinical prediction rules. The quality of reporting among studies validating clinical prediction rules needs to be improved.

Performance of Senior High School Indians and Adult Indian Groups in New Mexico on the General Aptitude Test Battery, 1968-1969.

ERIC Educational Resources Information Center

Wallace, Gilbert A.; Thomas, Susan L.

Purposes of the research were (1) to gather data to provide occupational and employment counselors with statistical data on employment and occupational-aptitudinal information on New Mexico Indians and (2) to collect data concerning workers' aptitudinal characteristics frequently needed by private industry as criteria for determining plant…

Aetiological Relationship between Language Performance and Autistic-Like Traits in Childhood: A Twin Study

ERIC Educational Resources Information Center

Dworzynski, Katharina; Ronald, Angelica; Hayiou-Thomas, Marianna; Rijsdijk, Fruhling; Happe, Francesca; Bolton, Patrick F.; Plomin, Robert

2007-01-01

Background: Impairments in language and communication are core features of autism spectrum disorders (ASDs). The basis for this association is poorly understood. How early language is related to each of the triad of impairments characteristic of ASDs is also in need of clarification. Aims: This is the first study that aims to determine the extent…

International Space Station Alpha (ISSA) Integrated Traffic Model

NASA Technical Reports Server (NTRS)

Gates, R. E.

1995-01-01

The paper discusses the development process of the International Space Station Alpha (ISSA) Integrated Traffic Model which is a subsystem analyses tool utilized in the ISSA design analysis cycles. Fast-track prototyping of the detailed relationships between daily crew and station consumables, propellant needs, maintenance requirements and crew rotation via spread sheets provide adequate benchmarks to assess cargo vehicle design and performance characteristics.

All Students Are Not Equal: A Case Study of Geometry Teachers' Instructional Strategies When Trained in Multiple-Intelligence-Based Practices in Secondary Classrooms

ERIC Educational Resources Information Center

Davis, Cassandre Y.

2017-01-01

Over 50% of secondary students failed the geometry end-of-course test in a Florida school district, indicating a need to improve academic performance. Secondary school students' learning characteristics and the effectiveness of teachers' instructional strategies are imperative to educational success. In this qualitative case study, geometry…

Brief Report: Is Cognitive Rehabilitation Needed in Verbal Adults with Autism? Insights from Initial Enrollment in a Trial of Cognitive Enhancement Therapy

ERIC Educational Resources Information Center

Eack, Shaun M.; Bahorik, Amber L.; Hogarty, Susan S.; Greenwald, Deborah P.; Litschge, Maralee Y.; Mazefsky, Carla A.; Minshew, Nancy J.

2013-01-01

Cognitive rehabilitation is an emerging set of potentially effective interventions for the treatment of autism spectrum disorder, yet the applicability of these approaches for "high functioning" adults who have normative levels of intelligence remains unexplored. This study examined the initial cognitive performance characteristics of 40…

A brief review of machine vision in the context of automated wood identification systems

Treesearch

John C. Hermanson; Alex C. Wiedenhoeft

2011-01-01

The need for accurate and rapid field identification of wood to combat illegal logging around the world is outpacing the ability to train personnel to perform this task. Despite increased interest in non-anatomical (DNA, spectroscopic, chemical) methods for wood identification, anatomical characteristics are the least labile data that can be extracted from solid wood...

Inputs requested from earth resources remote sensing data users regarding LANDSAT-C mission requirements and data needs

NASA Technical Reports Server (NTRS)

1976-01-01

Inputs from prospective LANDSAT-C data users are requested to aid NASA in defining LANDSAT-C mission and data requirements and in making decisions regarding the scheduling of satellite operations and ground data processing operations. Design specifications, multispectral band scanner performance characteristics, satellite schedule operations, and types of available data products are briefly described.

The Barefoot Hours: Out-of-School Programs Offer To Make the Most of Kids' Free Time, Turning Potentially Risky Afternoons into Golden Hours of Opportunity.

ERIC Educational Resources Information Center

Boss, Suzie

2002-01-01

Research suggests that after-school programs reduce juvenile crime and risky behavior; increase confidence, academic performance, and social skills; and build positive adult-child and home-school relationships. The need for supervised after-school activities, especially in poor neighborhoods; the characteristics of successful programs; and the…

CHARACTERISTICS OF FARM WORKERS AS RELATED TO STABILIZATION OF THE WORK FORCE.

ERIC Educational Resources Information Center

METZLER, WILLIAM H.

PROBLEMS OF THE MIGRANTS INCLUDE THEIR LACK OF DESIRE TO LEARN NEW SKILLS AND TO ADJUST TO NEW SITUATIONS, THEIR NEED TO MIGRATE TO FIND EMPLOYMENT DURING CERTAIN OFF-SEASONS, THEIR LACK OF TRAINING FOR MANY KINDS OF JOBS, THEIR PREJUDICED ATTITUDE TOWARD JOBS MAINLY PERFORMED BY FOREIGN OR COLORED WORKERS, THEIR TENDENCY TO LEAVE A JOB WHEN…

A study of space station needs, attributes, and architectural options, volume 2, technical. Book 2: Mission implementation concepts

NASA Technical Reports Server (NTRS)

1983-01-01

Space station systems characteristics and architecture are described. A manned space station operational analysis is performed to determine crew size, crew task complexity and time tables, and crew equipment to support the definition of systems and subsystems concepts. This analysis is used to select and evaluate the architectural options for development.

Variations in Oncologist Recommendations for Chemotherapy for Stage IV Lung Cancer: What Is the Role of Performance Status?

PubMed

Tisnado, Diana; Malin, Jennifer; Kahn, Katherine; Landrum, Mary Beth; Fletcher, Robert; Klabunde, Carrie; Clauser, Steven; Rogers, Selwyn O; Keating, Nancy L

2016-07-01

Chemotherapy prolongs survival in patients with advanced non-small-cell lung cancer. However, few studies have included patients with poor performance status. This study examined rates of oncologists' recommendations for chemotherapy by patient performance status and symptoms and how physician characteristics influence chemotherapy recommendations. We surveyed medical oncologists involved in the care of a population-based cohort of patients with lung cancer from the CanCORS (Cancer Care Outcomes Research and Surveillance) study. Physicians were queried about their likelihood to recommend chemotherapy to patients with stage IV lung cancer with varying performance status (Eastern Cooperative Oncology Group performance status 0 [good] v 3 [poor]) and presence or absence of tumor-related pain. Repeated measures logistic regression was used to estimate the independent associations of patients' performance status and symptoms and physicians' demographic and practice characteristics with chemotherapy recommendations. Nearly all physicians (adjusted rate, 97% to 99%) recommended chemotherapy for patients with good performance status, and approximately half (adjusted rate, 38% to 53%) recommended chemotherapy for patients with poor performance status (P < .001). Compared with patient factors, physician and practice characteristics were less strongly associated with chemotherapy recommendations in adjusted analyses. Strong consensus among oncologists exists for chemotherapy in patients with advanced non-small-cell lung cancer and good performance status. However, the relatively high rate of chemotherapy recommendations for patients with poor performance status despite the unfavorable risk-benefit profile highlights the need for ongoing work to define high-value care in oncology and to implement and evaluate strategies to align incentives for such care. Copyright © 2016 by American Society of Clinical Oncology.

A feasibility study on age-related factors of wrist pulse using principal component analysis.

PubMed

Jang-Han Bae; Young Ju Jeon; Sanghun Lee; Jaeuk U Kim

2016-08-01

Various analysis methods for examining wrist pulse characteristics are needed for accurate pulse diagnosis. In this feasibility study, principal component analysis (PCA) was performed to observe age-related factors of wrist pulse from various analysis parameters. Forty subjects in the age group of 20s and 40s were participated, and their wrist pulse signal and respiration signal were acquired with the pulse tonometric device. After pre-processing of the signals, twenty analysis parameters which have been regarded as values reflecting pulse characteristics were calculated and PCA was performed. As a results, we could reduce complex parameters to lower dimension and age-related factors of wrist pulse were observed by combining-new analysis parameter derived from PCA. These results demonstrate that PCA can be useful tool for analyzing wrist pulse signal.

CASPer, an online pre-interview screen for personal/professional characteristics: prediction of national licensure scores.

PubMed

Dore, Kelly L; Reiter, Harold I; Kreuger, Sharyn; Norman, Geoffrey R

2017-05-01

Typically, only a minority of applicants to health professional training are invited to interview. However, pre-interview measures of cognitive skills predict for national licensure scores (Gauer et al. in Med Educ Online 21 2016) and subsequently licensure scores predict for performance in practice (Tamblyn et al. in JAMA 288(23): 3019-3026, 2002; Tamblyn et al. in JAMA 298(9):993-1001, 2007). Assessment of personal and professional characteristics, with the same psychometric rigour of measures of cognitive abilities, are needed upstream in the selection to health profession training programs. To fill that need, Computer-based Assessment for Sampling Personal characteristics (CASPer)-an on-line, video-based screening test-was created. In this paper, we examine the correlation between CASPer and Canadian national licensure examination outcomes in 109 doctors who took CASPer at the time of selection to medical school. Specifically, CASPer scores were correlated against performance on cognitive and 'non-cognitive' subsections of both the Medical Council of Canada Qualifying Examination (MCCQE) Parts I (end of medical school) and Part II (18 months into specialty training). Unlike most national licensure exams, MCCQE has specific subcomponents examining personal/professional qualities, providing a unique opportunity for comparison. The results demonstrated moderate predictive validity of CASPer to national licensure outcomes of personal/professional characteristics three to six years after admission to medical school. These types of disattenuated correlations (r = 0.3-0.5) are not otherwise predicted by traditional screening measures. These data support the ability of a computer-based strategy to screen applicants in a feasible, reliable test, which has now demonstrated predictive validity, lending evidence of its validation for medical school applicant selection.

Frequency and rates of outdoor activities, and perceptions of places to perform these activities by Native Americans and Caucasians interviewed in Tennessee

PubMed Central

Gochfeld, Michael; Jeitner, Christian; Pittfield, Taryn

2015-01-01

Activity patterns and perceptions play a key role in human health risk, management, and planning. A survey of 233 people attending a Native American festival in Cookeville Tennessee were interviewed to determine the types, percent participation, and outdoor activities rates, and their perceptions of the importance of characteristics of sites. The indicate that: 1) a high percentage of respondents used outdoor environments, 2) they used them for consumptive (hunting, fishing), non-consumptive (hiking, walking, bird-watching), and religious/sacred activities, 3) a higher percentage of respondents engaged in non-consumptive than consumptive activities, 4) praying or meditating, communing with nature, and bird-watching had the highest uses rates 5) the environmental characteristics rated the highest were lack of radionuclides that presented a health risk, no visible smog, clean air, and unpolluted water, 6) presence of people, buildings and roads were rated the lowest and 7) Native Americans had higher participation rates, participated more frequently, and evaluated environmental characteristics higher than did Caucasians. This information can be used by managers to create and maintain outdoor habitats that fit the needs of local people. Planning and management require information on public policy, human needs and requirements, and human perceptions and evaluations of environmental characteristics. PMID:23229153

Near-infrared fluorescence image quality test methods for standardized performance evaluation

NASA Astrophysics Data System (ADS)

Kanniyappan, Udayakumar; Wang, Bohan; Yang, Charles; Ghassemi, Pejhman; Wang, Quanzeng; Chen, Yu; Pfefer, Joshua

2017-03-01

Near-infrared fluorescence (NIRF) imaging has gained much attention as a clinical method for enhancing visualization of cancers, perfusion and biological structures in surgical applications where a fluorescent dye is monitored by an imaging system. In order to address the emerging need for standardization of this innovative technology, it is necessary to develop and validate test methods suitable for objective, quantitative assessment of device performance. Towards this goal, we develop target-based test methods and investigate best practices for key NIRF imaging system performance characteristics including spatial resolution, depth of field and sensitivity. Characterization of fluorescence properties was performed by generating excitation-emission matrix properties of indocyanine green and quantum dots in biological solutions and matrix materials. A turbid, fluorophore-doped target was used, along with a resolution target for assessing image sharpness. Multi-well plates filled with either liquid or solid targets were generated to explore best practices for evaluating detection sensitivity. Overall, our results demonstrate the utility of objective, quantitative, target-based testing approaches as well as the need to consider a wide range of factors in establishing standardized approaches for NIRF imaging system performance.

Effects of classrooms' architecture on academic performance in view of telic versus paratelic motivation: a review.

PubMed

Lewinski, Peter

2015-01-01

This mini literature review analyzes research papers from many countries that directly or indirectly test how classrooms' architecture influences academic performance. These papers evaluate and explain specific characteristics of classrooms, with an emphasis on how they affect learning processes and learning outcomes. Factors such as acoustics, light, color, temperature, and seat arrangement are scrutinized to determine whether and by how much they improve or hinder students' academic performance in classrooms. Apter's (1982, 1984, 2014) reversal theory of telic versus paratelic motivation is presented and used to explain these findings. The results show preference for a learning environment that cues a telic motivation state in the students. Therefore, classroom features should not be distracting or arousing. Moreover, it appears the most influential factors affecting the learning process are noise, temperature and seat arrangement. In addition, there is no current agreement on how some particular physical characteristics of classrooms affect learning outcomes. More research is needed to establish stronger conclusions and recommendations.

Integrated Aero-Propulsion CFD Methodology for the Hyper-X Flight Experiment

NASA Technical Reports Server (NTRS)

Cockrell, Charles E., Jr.; Engelund, Walter C.; Bittner, Robert D.; Dilley, Arthur D.; Jentink, Tom N.; Frendi, Abdelkader

2000-01-01

Computational fluid dynamics (CFD) tools have been used extensively in the analysis and development of the X-43A Hyper-X Research Vehicle (HXRV). A significant element of this analysis is the prediction of integrated vehicle aero-propulsive performance, which includes an integration of aerodynamic and propulsion flow fields. This paper describes analysis tools used and the methodology for obtaining pre-flight predictions of longitudinal performance increments. The use of higher-fidelity methods to examine flow-field characteristics and scramjet flowpath component performance is also discussed. Limited comparisons with available ground test data are shown to illustrate the approach used to calibrate methods and assess solution accuracy. Inviscid calculations to evaluate lateral-directional stability characteristics are discussed. The methodology behind 3D tip-to-tail calculations is described and the impact of 3D exhaust plume expansion in the afterbody region is illustrated. Finally, future technology development needs in the area of hypersonic propulsion-airframe integration analysis are discussed.

Heat transfer with hockey-stick steam generator. [LMFBR

DOE Office of Scientific and Technical Information (OSTI.GOV)

Moody, E; Gabler, M J

1977-11-01

The hockey-stick modular design concept is a good answer to future needs for reliable, economic LMFBR steam generators. The concept was successfully demonstrated in the 30 Mwt MSG test unit; scaled up versions are currently in fabrication for CRBRP usage, and further scaling has been accomplished for PLBR applications. Design and performance characteristics are presented for the three generations of hockey-stick steam generators. The key features of the design are presented based on extensive analytical effort backed up by extensive ancillary test data. The bases for and actual performance evaluations are presented with emphasis on the CRBRP design. The designmore » effort on these units has resulted in the development of analytical techniques that are directly applicable to steam generators for any LMFBR application. In conclusion, the hockey-stick steam generator concept has been proven to perform both thermally and hydraulically as predicted. The heat transfer characteristics are well defined, and proven analytical techniques are available as are personnel experienced in their use.« less

The "surprise question" for predicting death in seriously ill patients: a systematic review and meta-analysis.

PubMed

Downar, James; Goldman, Russell; Pinto, Ruxandra; Englesakis, Marina; Adhikari, Neill K J

2017-04-03

The surprise question - "Would I be surprised if this patient died in the next 12 months?" - has been used to identify patients at high risk of death who might benefit from palliative care services. Our objective was to systematically review the performance characteristics of the surprise question in predicting death. We searched multiple electronic databases from inception to 2016 to identify studies that prospectively screened patients with the surprise question and reported on death at 6 to 18 months. We constructed models of hierarchical summary receiver operating characteristics (sROCs) to determine prognostic performance. Sixteen studies (17 cohorts, 11 621 patients) met the selection criteria. For the outcome of death at 6 to 18 months, the pooled prognostic characteristics were sensitivity 67.0% (95% confidence interval [CI] 55.7%-76.7%), specificity 80.2% (73.3%-85.6%), positive likelihood ratio 3.4 (95% CI 2.8-4.1), negative likelihood ratio 0.41 (95% CI 0.32-0.54), positive predictive value 37.1% (95% CI 30.2%-44.6%) and negative predictive value 93.1% (95% CI 91.0%-94.8%). The surprise question had worse discrimination in patients with noncancer illness (area under sROC curve 0.77 [95% CI 0.73-0.81]) than in patients with cancer (area under sROC curve 0.83 [95% CI 0.79-0.87; p = 0.02 for difference]). Most studies had a moderate to high risk of bias, often because they had a low or unknown participation rate or had missing data. The surprise question performs poorly to modestly as a predictive tool for death, with worse performance in noncancer illness. Further studies are needed to develop accurate tools to identify patients with palliative care needs and to assess the surprise question for this purpose. © 2017 Canadian Medical Association or its licensors.

Woven TPS Mechanical Property Evaluation

NASA Technical Reports Server (NTRS)

Gonzales, Gregory Lewis; Kao, David Jan-Woei; Stackpoole, Margaret M.

2013-01-01

Woven Thermal Protection Systems (WTPS) is a relatively new program funded by the Office of the Chief Technologist (OCT). The WTPS approach to producing TPS architectures uses precisely engineered 3-D weaving techniques that allow tailoring material characteristics needed to meet specific mission requirements. A series of mechanical tests were performed to evaluate performance of different weave types, and get a better understanding of failure modes expected in these three-dimensional architectures. These properties will aid in material down selection and guide selection of the appropriate WTPS for a potential mission.

Properties and Performance Attributes of Novel Co-Extruded Polyolefin Battery Separator Materials. Part 1; Mechanical Properties

NASA Technical Reports Server (NTRS)

Baldwin, Richard S.; Guzik, Monica; Skierski, Michael

2011-01-01

As NASA prepares for its next era of manned spaceflight missions, advanced energy storage technologies are being developed and evaluated to address future mission needs and technical requirements and to provide new mission-enabling technologies. Cell-level components for advanced lithium-ion batteries possessing higher energy, more reliable performance and enhanced, inherent safety characteristics are actively under development within the NASA infrastructure. A key component for safe and reliable cell performance is the cell separator, which separates the two energetic electrodes and functions to prevent the occurrence of an internal short-circuit while enabling ionic transport. Recently, a new generation of co-extruded separator films has been developed by ExxonMobil Chemical and introduced into their battery separator product portfolio. Several grades of this new separator material have been evaluated with respect to dynamic mechanical properties and safety-related performance attributes. This paper presents the results of these evaluations in comparison to a current state-ofthe-practice separator material. The results are discussed with respect to potential opportunities to enhance the inherent safety characteristics and reliability of future, advanced lithium-ion cell chemistries.

WOMBAT: A Scalable and High-performance Astrophysical Magnetohydrodynamics Code

NASA Astrophysics Data System (ADS)

Mendygral, P. J.; Radcliffe, N.; Kandalla, K.; Porter, D.; O'Neill, B. J.; Nolting, C.; Edmon, P.; Donnert, J. M. F.; Jones, T. W.

2017-02-01

We present a new code for astrophysical magnetohydrodynamics specifically designed and optimized for high performance and scaling on modern and future supercomputers. We describe a novel hybrid OpenMP/MPI programming model that emerged from a collaboration between Cray, Inc. and the University of Minnesota. This design utilizes MPI-RMA optimized for thread scaling, which allows the code to run extremely efficiently at very high thread counts ideal for the latest generation of multi-core and many-core architectures. Such performance characteristics are needed in the era of “exascale” computing. We describe and demonstrate our high-performance design in detail with the intent that it may be used as a model for other, future astrophysical codes intended for applications demanding exceptional performance.

Anthropometric and physical performance characteristics of top-elite, elite and non-elite youth female team handball players.

PubMed

Moss, Samantha Louise; McWhannell, Nicola; Michalsik, Lars Bojsen; Twist, Craig

2015-01-01

In order to maximise the potential for success, developing nations need to produce superior systems to identify and develop talent, which requires comprehensive and up-to-date values on elite players. This study examined the anthropometric and physical characteristics of youth female team handball players (16.07 ± 1.30 years) in non-elite (n = 47), elite (n = 37) and top-elite players (n = 29). Anthropometric profiling included sum of eight skinfolds, body mass, stature, girths, breadths and somatotype. Performance tests included 20 m sprint, counter-movement jump, throwing velocity, repeated shuttle sprint and jump ability test, and Yo-Yo Intermittent Recovery Test Level 1. Youth top-elite players had greater body mass, lean mass, stature, limb girths and breadths than elite and non-elite players, while only stature and flexed arm were higher in elite compared to non-elite players (all P < 0.05). Sum of skinfolds and waist-to-hip ratio were similar between groups (P > 0.05). Top-elite performed better in most performance tests compared to both elite and non-elite players (P < 0.05), although maximal and repeated 10 m sprints were similar between playing standards (P > 0.05). Elite outperformed non-elite players only in throwing velocity. The findings reveal that non-elite players compare unfavourably to top-elite international European players in many anthropometric and performance characteristics, and differ in a few characteristics compared to elite European club team players. This study is useful for emerging team handball nations in improving talent identification processes.

Challenges and potential solutions for big data implementations in developing countries.

PubMed

Luna, D; Mayan, J C; García, M J; Almerares, A A; Househ, M

2014-08-15

The volume of data, the velocity with which they are generated, and their variety and lack of structure hinder their use. This creates the need to change the way information is captured, stored, processed, and analyzed, leading to the paradigm shift called Big Data. To describe the challenges and possible solutions for developing countries when implementing Big Data projects in the health sector. A non-systematic review of the literature was performed in PubMed and Google Scholar. The following keywords were used: "big data", "developing countries", "data mining", "health information systems", and "computing methodologies". A thematic review of selected articles was performed. There are challenges when implementing any Big Data program including exponential growth of data, special infrastructure needs, need for a trained workforce, need to agree on interoperability standards, privacy and security issues, and the need to include people, processes, and policies to ensure their adoption. Developing countries have particular characteristics that hinder further development of these projects. The advent of Big Data promises great opportunities for the healthcare field. In this article, we attempt to describe the challenges developing countries would face and enumerate the options to be used to achieve successful implementations of Big Data programs.

Individual class evaluation and effective teaching characteristics in integrated curricula.

PubMed

Hwang, Jung Eun; Kim, Na Jin; Song, Meiying; Cui, Yinji; Kim, Eun Ju; Park, In Ae; Lee, Hye In; Gong, Hye Jin; Kim, Su Young

2017-12-12

In an integrated curriculum, multiple instructors take part in a course in the form of team teaching. Accordingly, medical schools strive to manage each course run by numerous instructors. As part of the curriculum management, course evaluation is conducted, but a single, retrospective course evaluation does not comprehensively capture student perception of classes by different instructors. This study aimed to demonstrate the need for individual class evaluation, and further to identify teaching characteristics that instructors need to keep in mind when preparing classes. From 2014 to 2015, students at one medical school left comments on evaluation forms after each class. Courses were also assessed after each course. Their comments were categorized by connotation (positive or negative) and by subject. Within each subject category, test scores were compared between positively and negatively mentioned classes. The Mann-Whitney U test was performed to test group differences in scores. The same method was applied to the course evaluation data. Test results for course evaluation showed group difference only in the practice/participation category. However, test results for individual class evaluation showed group differences in six categories: difficulty, main points, attitude, media/contents, interest, and materials. That is, the test scores of classes positively mentioned in six domains were significantly higher than those of negatively mentioned classes. It was proved that individual class evaluation is needed to manage multi-instructor courses in integrated curricula of medical schools. Based on the students' extensive feedback, we identified teaching characteristics statistically related to academic achievement. School authorities can utilize these findings to encourage instructors to develop effective teaching characteristics in class preparation.

Identifying local characteristic lengths governing sound wave properties in solid foams

NASA Astrophysics Data System (ADS)

Tan Hoang, Minh; Perrot, Camille

2013-02-01

Identifying microscopic geometric properties and fluid flow through opened-cell and partially closed-cell solid structures is a challenge for material science, in particular, for the design of porous media used as sound absorbers in building and transportation industries. We revisit recent literature data to identify the local characteristic lengths dominating the transport properties and sound absorbing behavior of polyurethane foam samples by performing numerical homogenization simulations. To determine the characteristic sizes of the model, we need porosity and permeability measurements in conjunction with ligament lengths estimates from available scanning electron microscope images. We demonstrate that this description of the porous material, consistent with the critical path picture following from the percolation arguments, is widely applicable. This is an important step towards tuning sound proofing properties of complex materials.

Optimized Li-Ion Electrolytes Containing Fluorinated Ester Co-Solvents

NASA Technical Reports Server (NTRS)

Prakash, G. K. Surya; Smart, Marshall; Smith, Kiah; Bugga, Ratnakumar

2010-01-01

A number of experimental lithium-ion cells, consisting of MCMB (meso-carbon microbeads) carbon anodes and LiNi(0.8)Co(0.2)O2 cathodes, have been fabricated with increased safety and expanded capability. These cells serve to verify and demonstrate the reversibility, low-temperature performance, and electrochemical aspects of each electrode as determined from a number of electrochemical characterization techniques. A number of Li-ion electrolytes possessing fluorinated ester co-solvents, namely trifluoroethyl butyrate (TFEB) and trifluoroethyl propionate (TFEP), were demonstrated to deliver good performance over a wide temperature range in experimental lithium-ion cells. The general approach taken in the development of these electrolyte formulations is to optimize the type and composition of the co-solvents in ternary and quaternary solutions, focusing upon adequate stability [i.e., EC (ethylene carbonate) content needed for anode passivation, and EMC (ethyl methyl carbonate) content needed for lowering the viscosity and widening the temperature range, while still providing good stability], enhancing the inherent safety characteristics (incorporation of fluorinated esters), and widening the temperature range of operation (the use of both fluorinated and non-fluorinated esters). Further - more, the use of electrolyte additives, such as VC (vinylene carbonate) [solid electrolyte interface (SEI) promoter] and DMAc (thermal stabilizing additive), provide enhanced high-temperature life characteristics. Multi-component electrolyte formulations enhance performance over a temperature range of -60 to +60 C. With the need for more safety with the use of these batteries, flammability was a consideration. One of the solvents investigated, TFEB, had the best performance with improved low-temperature capability and high-temperature resilience. This work optimized the use of TFEB as a co-solvent by developing the multi-component electrolytes, which also contain non-halogenated esters, film forming additives, thermal stabilizing additives, and flame retardant additives. Further optimization of these electrolyte formulations is anticipated to yield improved performance. It is also anticipated that much improved performance will be demonstrated once these electrolyte solutions are incorporated into hermetically sealed, large capacity prototype cells, especially if effort is devoted to ensure that all electrolyte components are highly pure.

Performance Evaluation of Bluetooth Low Energy: A Systematic Review.

PubMed

Tosi, Jacopo; Taffoni, Fabrizio; Santacatterina, Marco; Sannino, Roberto; Formica, Domenico

2017-12-13

Small, compact and embedded sensors are a pervasive technology in everyday life for a wide number of applications (e.g., wearable devices, domotics, e-health systems, etc.). In this context, wireless transmission plays a key role, and among available solutions, Bluetooth Low Energy (BLE) is gaining more and more popularity. BLE merges together good performance, low-energy consumption and widespread diffusion. The aim of this work is to review the main methodologies adopted to investigate BLE performance. The first part of this review is an in-depth description of the protocol, highlighting the main characteristics and implementation details. The second part reviews the state of the art on BLE characteristics and performance. In particular, we analyze throughput, maximum number of connectable sensors, power consumption, latency and maximum reachable range, with the aim to identify what are the current limits of BLE technology. The main results can be resumed as follows: throughput may theoretically reach the limit of ~230 kbps, but actual applications analyzed in this review show throughputs limited to ~100 kbps; the maximum reachable range is strictly dependent on the radio power, and it goes up to a few tens of meters; the maximum number of nodes in the network depends on connection parameters, on the network architecture and specific device characteristics, but it is usually lower than 10; power consumption and latency are largely modeled and analyzed and are strictly dependent on a huge number of parameters. Most of these characteristics are based on analytical models, but there is a need for rigorous experimental evaluations to understand the actual limits.

Performance Evaluation of Bluetooth Low Energy: A Systematic Review

PubMed Central

Taffoni, Fabrizio; Santacatterina, Marco; Sannino, Roberto

2017-01-01

Small, compact and embedded sensors are a pervasive technology in everyday life for a wide number of applications (e.g., wearable devices, domotics, e-health systems, etc.). In this context, wireless transmission plays a key role, and among available solutions, Bluetooth Low Energy (BLE) is gaining more and more popularity. BLE merges together good performance, low-energy consumption and widespread diffusion. The aim of this work is to review the main methodologies adopted to investigate BLE performance. The first part of this review is an in-depth description of the protocol, highlighting the main characteristics and implementation details. The second part reviews the state of the art on BLE characteristics and performance. In particular, we analyze throughput, maximum number of connectable sensors, power consumption, latency and maximum reachable range, with the aim to identify what are the current limits of BLE technology. The main results can be resumed as follows: throughput may theoretically reach the limit of ~230 kbps, but actual applications analyzed in this review show throughputs limited to ~100 kbps; the maximum reachable range is strictly dependent on the radio power, and it goes up to a few tens of meters; the maximum number of nodes in the network depends on connection parameters, on the network architecture and specific device characteristics, but it is usually lower than 10; power consumption and latency are largely modeled and analyzed and are strictly dependent on a huge number of parameters. Most of these characteristics are based on analytical models, but there is a need for rigorous experimental evaluations to understand the actual limits. PMID:29236085

International Space Station Alpha (ISSA) Integrated Traffic Model

NASA Technical Reports Server (NTRS)

Gates, Robert E.

1994-01-01

The paper discusses the development process of the International Space Station Alpha (ISSA) Integrated Traffic Model which is a subsystem analyses tool utilized in the ISSA design analysis cycles. Fast-track prototyping of the detailed relationships between daily crew and station consumables, propellant needs, maintenance requirements, and crew rotation via spread sheets provides adequate bench marks to assess cargo vehicle design and performance characteristics.

IDENTIFICATION AND EVALUATION OF CHARACTERISTICS OF KINDERGARTEN CHILDREN THAT FORETELL EARLY LEARNING PROBLEMS. FINAL REPORT.

ERIC Educational Resources Information Center

REECE, WILLIAM K.

TO EVALUATE THE EFFECTIVENESS OF A KINDERGARTEN PROGRAM OF SPECIFIC TRAINING RELATED TO MOTOR, SENSORY, AND PERCEPTUAL (M-S-P) PERFORMANCE, AN INSTRUMENT WAS DEVISED TO MEASURE THE M-S-P NEEDS AND STRENGTHS OF INDIVIDUAL PUPILS. RESEARCH WAS CONDUCTED TO TEST THE DIAGNOSTIC AND PREDICTIVE POTENTIALS OF THE M-S-P INSTRUMENT AND TO ASCERTAIN THE…

System verification and validation: a fundamental systems engineering task

NASA Astrophysics Data System (ADS)

Ansorge, Wolfgang R.

2004-09-01

Systems Engineering (SE) is the discipline in a project management team, which transfers the user's operational needs and justifications for an Extremely Large Telescope (ELT) -or any other telescope-- into a set of validated required system performance characteristics. Subsequently transferring these validated required system performance characteris-tics into a validated system configuration, and eventually into the assembled, integrated telescope system with verified performance characteristics and provided it with "objective evidence that the particular requirements for the specified intended use are fulfilled". The latter is the ISO Standard 8402 definition for "Validation". This presentation describes the verification and validation processes of an ELT Project and outlines the key role System Engineering plays in these processes throughout all project phases. If these processes are implemented correctly into the project execution and are started at the proper time, namely at the very beginning of the project, and if all capabilities of experienced system engineers are used, the project costs and the life-cycle costs of the telescope system can be reduced between 25 and 50 %. The intention of this article is, to motivate and encourage project managers of astronomical telescopes and scientific instruments to involve the entire spectrum of Systems Engineering capabilities performed by trained and experienced SYSTEM engineers for the benefit of the project by explaining them the importance of Systems Engineering in the AIV and validation processes.

Variables that influence Ironman triathlon performance – what changed in the last 35 years?

PubMed Central

Knechtle, Beat; Knechtle, Raphael; Stiefel, Michael; Zingg, Matthias Alexander; Rosemann, Thomas; Rüst, Christoph Alexander

2015-01-01

Objective This narrative review summarizes findings for Ironman triathlon performance and intends to determine potential predictor variables for Ironman race performance in female and male triathletes. Methods A literature search was performed in PubMed using the terms “Ironman”, “triathlon”, and “performance”. All resulting articles were searched for related citations. Results Age, previous experience, sex, training, origin, anthropometric and physiological characteristics, pacing, and performance in split disciplines were predictive. Differences exist between the sexes for anthropometric characteristics. The most important predictive variables for a fast Ironman race time were age of 30–35 years (women and men), a fast personal best time in Olympic distance triathlon (women and men), a fast personal best time in marathon (women and men), high volume and high speed in training where high volume was more important than high speed (women and men), low body fat, low skin-fold thicknesses and low circumference of upper arm (only men), and origin from the United States of America (women and men). Conclusion These findings may help athletes and coaches to plan an Ironman triathlon career. Age and previous experience are important to find the right point in the life of a triathlete to switch from the shorter triathlon distances to the Ironman distance. Future studies need to correlate physiological characteristics such as maximum oxygen uptake with Ironman race time to investigate their potential predictive value and to investigate socio-economic aspects in Ironman triathlon. PMID:26346992

An Assessment of CFD Effectiveness for Vortex Flow Simulation to Meet Preliminary Design Needs

NASA Technical Reports Server (NTRS)

Raj, P.; Ghaffari, F.; Finley, D. B.

2003-01-01

The low-speed flight and transonic maneuvering characteristics of combat air vehicles designed for efficient supersonic flight are significantly affected by the presence of free vortices. At moderate-to-high angles of attack, the flow invariably separates from the leading edges of the swept slender wings, as well as from the forebodies of the air vehicles, and rolls up to form free vortices. The design of military vehicles is heavily driven by the need to simultaneously improve performance and affordability.1 In order to meet this need, increasing emphasis is being placed on using Modeling & Simulation environments employing the Integrated Product & Process Development (IPPD) concept. The primary focus is on expeditiously providing design teams with high-fidelity data needed to make more informed decisions in the preliminary design stage. Extensive aerodynamic data are needed to support combat air vehicle design. Force and moment data are used to evaluate performance and handling qualities; surface pressures provide inputs for structural design; and flow-field data facilitate system integration. Continuing advances in computational fluid dynamics (CFD) provide an attractive means of generating the desired data in a manner that is responsive to the needs of the preliminary design efforts. The responsiveness is readily characterized as timely delivery of quality data at low cost.

CLINICAL DEMOGRAPHIC CHARACTERISTICS OF TOTAL KNEE ARTHROPLASTY IN A UNIVERSITY HOSPITAL

PubMed Central

Souza, José Miguel Francisco da Silva; Ferreira, Ricardo dos Santos; de Lima, Alexandre José Pereira; de Sá, Airton César Pereira; de Albuquerque, Paulo Cezar Vidal Carneiro

2016-01-01

ABSTRACT Objective: To assess socio-demographic characteristics of patients undergoing total knee arthroplasty (TKA) in a public university hospital, evaluating the outcome infection and associated factors. Method: A retrospective study was carried out with 78 patients undergoing TKA, from 2013 to 2014. The socio-demographic and clinical characteristics of the patients were collected. Comparison between infected and non-infected patients was performed to find out which variables were possibly associated to this complication. Result: Of 81 arthroplasties performed, patients were older (mean age 64 years), women (79%), with primary osteoarthritis as main etiology (87.6%) and most had comorbidities (82.7%). Infection occurred in 16% of patients, and this outcome associated with age older than 65 years (p=0.023) and the occurrence of deep vein thrombosis (p=0.027). Conclusion: Patients undergoing TKA are mostly elderly women with primary osteoarthritis in the knee and comorbidities who developed infection in 16% of cases. More studies need to be conducted aimed at creating specific protocols in order to improve the quality of clinical practice. Level of Evidence III, Retrospective Comparative Study. PMID:28924354

On the interpolation of light-scattering responses from irregularly shaped particles

NASA Astrophysics Data System (ADS)

Videen, Gorden; Zubko, Evgenij; Arnold, Jessica A.; MacCall, Benjamin; Weinberger, Alycia J.; Shkuratov, Yuriy; Muñoz, Olga

2018-05-01

Common particle characteristics needed for many applications may include size, eccentricity, porosity and refractive index. Determining such characteristics from scattered light is a primary goal of remote sensing. For other applications, like differentiating a hazardous particle from the natural background, information about higher fidelity particle characteristics may be required, including specific shape or chemical composition. While a complete characterization of a particle system from its scattered light through the inversion process remains unachievable, great strides have been made in providing information in the form of constraints on particle characteristics. Recent advances have been made in quantifying the characteristics of polydispersions of irregularly shaped particles by making comparisons of the light-scattering signals from model simulant particles. We show that when the refractive index is changed, the light-scattering characteristics from polydispersions of such particles behave monotonically over relatively large parameter ranges compared with those of monodisperse distributions of particles having regular shapes, like spheres, spheroids, etc. This allows for their properties to be interpolated, which results in a significant reduction of the computational load when performing inversions.

[Analysis of the factors related to the needs of patients with cancer].

PubMed

Lee, Jung A; Lee, Sun Hee; Park, Jong Hyock; Park, Jae Hyun; Kim, Sung Gyeong; Seo, Ju Hyun

2010-05-01

Limited research has investigated the specific needs of patients with cancer. This study was performed to explore patients needs and the related factors. The data were collected by 1 National Cancer Center and 9 regional cancer centers in Korea. An interview survey was performed with using a structured questionnaire for the subjects (2,661 patients who gave written informed consent to participate) survey 4 months after diagnosis and review of medical records. Data were analyzed using t-test, ANOVA and multiple regression analysis. When comparing the relating factors related with patient needs to the sociodemographic characteristics, the female group showed a higher level of recognition for physical symptoms, social support needs. The younger group showed a significantly higher level of recognition for health care staff, psychological problems, information and education, social support, hospital services needs. In addition, the higher educated group showed a higher level of recognition for health care staff, physical symptoms, social support needs. The higher income and office workers group showed a higher level of recognition for hospital services needs. When comparing the relating factors related with patient needs to the cancer, the breast cancer group showed a higher level of recognition for all needs excluding physical symptoms, accessibility and financial support needs. The combined radiotherapy with surgery and chemotherapy group showed a higher level of recognition for psychological problems, information and education, social support needs. This study showed that needs on patient with cancer was significantly influenced by female, higher education, lower income, having religion, office worker, liver cancer, breast cancer, colon cancer, chemotherapy, and combined therapy.

An exploratory investigation of the translation of Pacific Northwest Laboratory's print manuals system to an on-line manuals system

DOE Office of Scientific and Technical Information (OSTI.GOV)

Heubach, J.G.; Hunt, S.T.; Pond, L.R.

1992-06-01

Information management technology has proliferated in the past decade in response to the information explosion. As documentation accumulates, the need to access information residing in manuals, handbooks and regulations conveniently, accurately, and quickly has increased. However, studies show that only fractions of the available information is read (Martin, 1978). Consequently, one of the biggest challenges in linking information and electronic management of information is to use the power of communication technology to meet the information needs of the audience. Pacific Northwest Laboratories' (PNL) investigation of translating its print manual system to an on-line system fits this challenge precisely. PNL's manualsmore » contain a tremendous amount of information for which manual holders are responsible. To perform their tasks in compliance with policy and procedure guidelines, users need to access information accurately, conveniently, and quickly. In order to select and use information management tools wisely, answers must be sought to a few basic questions. Communication experts cite four key questions: What do users want What do users need What characteristics of an on-line information system affect its usefulness Who are the users whose wants and needs are to be met Once these questions are answered, attention can be focused on finding the best match between user requirements and technology characteristics and weighing the costs and benefits of proposed options.« less

An exploratory investigation of the translation of Pacific Northwest Laboratory`s print manuals system to an on-line manuals system

DOE Office of Scientific and Technical Information (OSTI.GOV)

Heubach, J.G.; Hunt, S.T.; Pond, L.R.

1992-06-01

Information management technology has proliferated in the past decade in response to the information explosion. As documentation accumulates, the need to access information residing in manuals, handbooks and regulations conveniently, accurately, and quickly has increased. However, studies show that only fractions of the available information is read (Martin, 1978). Consequently, one of the biggest challenges in linking information and electronic management of information is to use the power of communication technology to meet the information needs of the audience. Pacific Northwest Laboratories` (PNL) investigation of translating its print manual system to an on-line system fits this challenge precisely. PNL`s manualsmore » contain a tremendous amount of information for which manual holders are responsible. To perform their tasks in compliance with policy and procedure guidelines, users need to access information accurately, conveniently, and quickly. In order to select and use information management tools wisely, answers must be sought to a few basic questions. Communication experts cite four key questions: What do users want? What do users need? What characteristics of an on-line information system affect its usefulness? Who are the users whose wants and needs are to be met? Once these questions are answered, attention can be focused on finding the best match between user requirements and technology characteristics and weighing the costs and benefits of proposed options.« less

Patients' need for information provision and perceived participation in decision making in doctor-patient consultation: Micro-cultural differences between French- and Italian-speaking Switzerland.

PubMed

Camerini, Anne-Linda; Schulz, Peter J

2016-03-01

To explore micro-cultural differences in patients' need for information provision, perceived participation in decision making, and related concepts during the doctor-patient consultation between French- and Italian-speaking patients in Switzerland. In 2012, 153 French- and 120 Italian-speaking patients with chronic low back pain (cLBP) were surveyed on their need for information provision, perceived participation in decision making, cLBP knowledge, psychological empowerment, and trust in their doctor. T-tests and regression analyses with interaction terms were performed. Results show that French- and Italian-speaking patients significantly differed in their participation in decision making, with French-speaking patients reporting higher involvement. Need for information provision was related to empowerment among French- and to trust among Italian-speaking patients. For participation in decision making, trust was the only related concept among French-, and cLBP knowledge among Italian-speaking patients. Significant interaction terms indicate a moderation of micro-cultural background. Findings point towards differences in the relationships between individual patient characteristics (i.e. knowledge, empowerment) and relational doctor-patient characteristics (i.e. trust) and patients' need for information provision and participation in decision making between French- and Italian-speaking patients in Switzerland. Doctors should be aware of these differences when dealing with patients of different micro-cultural backgrounds. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

Perspectives to performance of environment and health assessments and models--from outputs to outcomes?

PubMed

Pohjola, Mikko V; Pohjola, Pasi; Tainio, Marko; Tuomisto, Jouni T

2013-06-26

The calls for knowledge-based policy and policy-relevant research invoke a need to evaluate and manage environment and health assessments and models according to their societal outcomes. This review explores how well the existing approaches to assessment and model performance serve this need. The perspectives to assessment and model performance in the scientific literature can be called: (1) quality assurance/control, (2) uncertainty analysis, (3) technical assessment of models, (4) effectiveness and (5) other perspectives, according to what is primarily seen to constitute the goodness of assessments and models. The categorization is not strict and methods, tools and frameworks in different perspectives may overlap. However, altogether it seems that most approaches to assessment and model performance are relatively narrow in their scope. The focus in most approaches is on the outputs and making of assessments and models. Practical application of the outputs and the consequential outcomes are often left unaddressed. It appears that more comprehensive approaches that combine the essential characteristics of different perspectives are needed. This necessitates a better account of the mechanisms of collective knowledge creation and the relations between knowledge and practical action. Some new approaches to assessment, modeling and their evaluation and management span the chain from knowledge creation to societal outcomes, but the complexity of evaluating societal outcomes remains a challenge.

Psychosocial functioning in Dutch foster children: The relationship with child, family, and placement characteristics.

PubMed

Goemans, Anouk; van Geel, Mitch; Vedder, Paul

2016-06-01

Foster care is the preferred alternative for out-of-home care, but not necessarily beneficial for foster children's psychosocial functioning. This dilemma leaves researchers with a challenge to find out more about the factors related to foster children's social and emotional functioning. In a sample of 446 Dutch foster children we examined the extent to which three clusters of characteristics, those akin to the foster child, the foster family, or foster placement, were related to foster children's functioning at the time of research. Multivariate three-step hierarchical regression analyses were performed for three outcome variables: externalizing problems, internalizing problems, and prosocial behavior. We found that all three clusters of foster care characteristics were significantly related to foster children's functioning. Foster placement characteristics, in particular interventions aimed at foster children, explained the largest amount of variance in behavior problems. Children receiving interventions had more externalizing and internalizing problems. A possible explanation is that interventions are indicated for those foster children who are in the highest need of additional support. Prosocial behavior was particularly related to foster family characteristics. The results were mostly in line with international research. Careful screening and monitoring of the social and emotional functioning of foster children may help to identify problems at an early stage. In addition (preventive) support should be offered to those foster children and families who are in need of it. Copyright © 2016 Elsevier Ltd. All rights reserved.

Real Gas Computation Using an Energy Relaxation Method and High-Order WENO Schemes

NASA Technical Reports Server (NTRS)

Montarnal, Philippe; Shu, Chi-Wang

1998-01-01

In this paper, we use a recently developed energy relaxation theory by Coquel and Perthame and high order weighted essentially non-oscillatory (WENO) schemes to simulate the Euler equations of real gas. The main idea is an energy decomposition into two parts: one part is associated with a simpler pressure law and the other part (the nonlinear deviation) is convected with the flow. A relaxation process is performed for each time step to ensure that the original pressure law is satisfied. The necessary characteristic decomposition for the high order WENO schemes is performed on the characteristic fields based on the first part. The algorithm only calls for the original pressure law once per grid point per time step, without the need to compute its derivatives or any Riemann solvers. Both one and two dimensional numerical examples are shown to illustrate the effectiveness of this approach.

Patient's need for choice and information across the interface between primary and secondary care: a survey.

PubMed

Berendsen, Annette J; de Jong, G Majella; Schuling, Jan; Bosveld, Henk E P; de Waal, Margot W M; Mitchell, Geoffrey K; van der Meer, Klaas; Meyboom-de Jong, Betty

2010-04-01

Hospitals in The Netherlands have recently made certain performance data public, allowing patients to choose the location of their care. The objective of this study is to assess (a) patient preferences and experiences concerning the transition between primary and secondary health care, (b) patients' needs for choice and information and how these are influenced by personal and morbidity factors. Two different types of questionnaires were used. The first questionnaire concerns the importance that patients attach to the care provided. The second questionnaire concerns the actual experiences of the patient with the care provided. For the selection of patients, we used the databases of the registration networks of the Departments of General Practice of the Universities of Groningen and Leiden. The questionnaires were returned by 513 patients (Importance 69%) and 1404 patients (Experience 65%). Many patients prefer the GP advising them regarding which hospital or specialist they should be referred to: a quarter of the patients preferred that the GP decided for them. Patients with a curable condition and patients aged between 25 and 65, highly educated and with stable personal characteristics as measured by a purposive scale, more often wished to use information from internet or newspapers to make a decision. The amount of information that was needed on illness or treatment varied greatly. Young people, older people, and those with less stable personal characteristics more often desired only practical information. In spite of making performance data of different health care institutions public, only a limited number of patients want to use this information on a limited number of health problems. Care providers should take differences into account concerning patients' need for information on their illness. 2009 Elsevier Ireland Ltd. All rights reserved.

Looking Under the Streetlight? A Framework for Differentiating Performance Measures by Level of Care in a Value-Based Payment Environment

PubMed Central

Van Such, Monica B.; Nesse, Robert E.; Dilling, James A.; Swensen, Stephen J.; Thompson, Kristine M.; Orlowski, Janis M.; Santrach, Paula J.

2017-01-01

The majority of quality measures used to assess providers and hospitals are based on easily obtained data, focused on a few dimensions of quality, and developed mainly for primary/community care and population health. While this approach supports efforts focused on addressing the triple aim of health care, many current quality report cards and assessments do not reflect the breadth or complexity of many referral center practices. In this article, the authors highlight the differences between population health efforts and referral care and address issues related to value measurement and performance assessment. They discuss why measures may need to differ across the three levels of care (primary/community care, secondary care, complex care) and illustrate the need for further risk adjustment to eliminate referral bias. With continued movement toward value-based purchasing, performance measures and reimbursement schemes need to reflect the increased level of intensity required to provide complex care. The authors propose a framework to operationalize value measurement and payment for specialty care, and they make specific recommendations to improve performance measurement for complex patients. Implementing such a framework to differentiate performance measures by level of care involves coordinated efforts to change both policy and operational platforms. An essential component of this framework is a new model that defines the characteristics of patients who require complex care and standardizes metrics that incorporate those definitions. PMID:28353502

Looking Under the Streetlight? A Framework for Differentiating Performance Measures by Level of Care in a Value-Based Payment Environment.

PubMed

Naessens, James M; Van Such, Monica B; Nesse, Robert E; Dilling, James A; Swensen, Stephen J; Thompson, Kristine M; Orlowski, Janis M; Santrach, Paula J

2017-07-01

The majority of quality measures used to assess providers and hospitals are based on easily obtained data, focused on a few dimensions of quality, and developed mainly for primary/community care and population health. While this approach supports efforts focused on addressing the triple aim of health care, many current quality report cards and assessments do not reflect the breadth or complexity of many referral center practices.In this article, the authors highlight the differences between population health efforts and referral care and address issues related to value measurement and performance assessment. They discuss why measures may need to differ across the three levels of care (primary/community care, secondary care, complex care) and illustrate the need for further risk adjustment to eliminate referral bias.With continued movement toward value-based purchasing, performance measures and reimbursement schemes need to reflect the increased level of intensity required to provide complex care. The authors propose a framework to operationalize value measurement and payment for specialty care, and they make specific recommendations to improve performance measurement for complex patients. Implementing such a framework to differentiate performance measures by level of care involves coordinated efforts to change both policy and operational platforms. An essential component of this framework is a new model that defines the characteristics of patients who require complex care and standardizes metrics that incorporate those definitions.

Perception of spokespersons' performance and characteristics in crisis communication: experience of the 2003 severe acute respiratory syndrome outbreak in Taiwan.

PubMed

Lyu, Shu-Yu; Chen, Ruey-Yu; Wang, Shih-fan Steve; Weng, Ya-Ling; Peng, Eugene Yu-Chang; Lee, Ming-Been

2013-10-01

To explore perception of spokespersons' performance and characteristics in response to the 2003 severe acute respiratory syndrome (SARS) outbreak. This study was conducted from March to July, 2005, using semi-structured in-depth interviews to collect data. All interviews were audio-recorded and transcribed verbatim. A qualitative content analysis was employed to analyze the transcribed data. Interviewees included media reporters, media supervisors, health and medical institution executives or spokespersons, and social observers. Altogether, 35 interviewees were recruited for in-depth interviews, and the duration of the interview ranged from 1 hour to 2 hours. Results revealed that the most important characteristics of health/medical institutions spokespersons are professional competence and good interaction with the media. In contrast, the most important behaviors they should avoid are concealing the truth and misreporting the truth. Three major flaws of spokespersons' performance were identified: they included poor understanding of media needs and landscape; blaming the media to cover up a mistake they made in an announcement; and lack of sufficient participation in decision-making or of authorization from the head of organization. Spokespersons of health and medical institutions play an important role in media relations during the crisis of a newly emerging infectious disease. Copyright © 2013. Published by Elsevier B.V.

An Airborne Communications Roadmap for the U.S. Federal Air Marshal Service: Overview and Status

NASA Technical Reports Server (NTRS)

Martzaklis, Konstantinos S.

2007-01-01

Following the events of September 11, 2001, the responsibilities, operations and numbers of the U.S. Federal Air Marshal Service (FAMS) wer e greatly expanded. With this expansion, new critical research and te chnology needs were identified, including the need for air to ground telecommunications capabilities. To address this need, the FAMS has cr eated a working group to develop, deploy and enhance aviation communi cations with respect to security and law enforcement. This paper presents the working group's progress to date in generating a FAMS air-gro und communications roadmap identifying expected communications servic es, technology maturity, and technology gaps over a timeline. The paper includes a communications preliminary requirements summary and syst em performance characteristics needed to meet identified operational needs. The system engineering process utilized is presented beginning with the identification of users, their operational needs and relevant constraints. The operational needs are translated to desired airbor ne communications services. System technical performance requirements associated with the identified services are summarized. In addition, notional communications architectures addressing the requirements are presented. Finally, future plans to identify and assess potential ca ndidate systems and their associated technical architectures, gaps and barriers to implementation are discussed. The paper addresses the cu rrent, near term (within 5 years) and far term (10 years) timeframes for such an airborne communications system.

The Association of Eating Performance and Environmental Stimulation among Older Adults with Dementia in Nursing Homes: A Secondary Analysis

PubMed Central

Liu, Wen; Jao, Ying-Ling; Williams, Kristine

2017-01-01

Background Nursing home residents with dementia experience increased risk for compromised eating performance due to intrapersonal, interpersonal, and environmental factors. Environmental stimulation is physical, social, and/or sensory stimulation present in the environment that can potentially trigger individuals’ emotion or motivate physical reactions. Beyond the personal factors, there is a lack of evidence on how environmental stimulation influences individuals’ eating performance at mealtimes. Objectives This study examined the association between environmental stimulation and eating performance among nursing home residents with dementia. Design This study was a secondary analysis using baseline videos selected from a communication intervention study, where videos were recorded to capture staff-resident interactions during care activities for nursing home residents with dementia. Videos were included in this study only if residents demonstrated eating activities at mealtimes. Sample and Setting A total of 36 videos were selected (mean length = 4 minutes). The sample included 15 residents with dementia (mean age = 86), and 19 certified nursing assistants (mean age = 36) in 8 nursing homes. Methods The dependent variable was eating performance as measured by the Level of Eating Independence scale (range: 15–36, with higher scores indicating better eating performance). The independent variables were characteristics of environmental stimulation measured by the Person-Environment Apathy Rating-Environment subscale (stimulation clarity, stimulation strength, stimulation specificity, interaction involvement, physical accessibility, and environmental feedback). Each characteristic was rated on a 1–4 scale with higher scores indicating more desirable environmental stimulation. Multilevel models were used to examine the association between eating performance and environmental stimulation, adjusting for resident characteristics (i.e., age, gender, dementia stage, function, comorbidity, psychoactive medication use) and nesting effects of residents and staff. Results Resident participants demonstrated moderate levels of eating performance (M=27.08, SD = 5.16). Eating performance was significantly lower among older residents, those with more advanced dementia, and higher comorbidity. After controlling for resident characteristics, eating performance was significantly associated with stimulation specificity (how the stimulation is delivered and tailored to the resident), and was not associated with other environmental stimulation characteristics. For each 1 point increase in stimulation specificity, eating performance increased by 8.78 points (95% CI=.59, 16.97). Conclusions Environmental stimulation that is personally tailored to a resident’ needs and preferences and directly offered to a resident contributed to better eating performance among residents with dementia. The findings will direct future development and implementation of person-directed mealtime care programs and dining environment arrangements for residents with dementia in nursing homes. PMID:28340390

The association of eating performance and environmental stimulation among older adults with dementia in nursing homes: A secondary analysis.

PubMed

Liu, Wen; Jao, Ying-Ling; Williams, Kristine

2017-06-01

Nursing home residents with dementia experience increased risk for compromised eating performance due to intrapersonal, interpersonal, and environmental factors. Environmental stimulation is physical, social, and/or sensory stimulation present in the environment that can potentially trigger individuals' emotion or motivate physical reactions. Beyond the personal factors, there is a lack of evidence on how environmental stimulation influences individuals' eating performance at mealtimes. This study examined the association between environmental stimulation and eating performance among nursing home residents with dementia. This study was a secondary analysis using baseline videos selected from a communication intervention study, where videos were recorded to capture staff-resident interactions during care activities for nursing home residents with dementia. Videos were included in this study only if residents demonstrated eating activities at mealtimes. A total of 36 videos were selected (mean length=4min). The sample included 15 residents with dementia (mean age=86), and 19 certified nursing assistants (mean age=36) in 8 nursing homes. The dependent variable was eating performance as measured by the Level of Eating Independence scale (range: 15-36, with higher scores indicating better eating performance). The independent variables were characteristics of environmental stimulation measured by the Person-Environment Apathy Rating-Environment subscale (stimulation clarity, stimulation strength, stimulation specificity, interaction involvement, physical accessibility, and environmental feedback). Each characteristic was rated on a 1-4 scale with higher scores indicating more desirable environmental stimulation. Multilevel models were used to examine the association between eating performance and environmental stimulation, adjusting for resident characteristics (i.e., age, gender, dementia stage, function, comorbidity, psychoactive medication use) and nesting effects of residents and staff. Resident participants demonstrated moderate levels of eating performance (M=27.08, SD=5.16). Eating performance was significantly lower among older residents, those with more advanced dementia, and higher comorbidity. After controlling for resident characteristics, eating performance was significantly associated with stimulation specificity (how the stimulation is delivered and tailored to the resident), and was not associated with other environmental stimulation characteristics. For each 1 point increase in stimulation specificity, eating performance increased by 8.78 points (95% CI=0.59, 16.97). Environmental stimulation that is personally tailored to a resident' needs and preferences and directly offered to a resident contributed to better eating performance among residents with dementia. The findings will direct future development and implementation of person-directed mealtime care programs and dining environment arrangements for residents with dementia in nursing homes. Copyright © 2017 Elsevier Ltd. All rights reserved.

Storage requirement definition study

NASA Technical Reports Server (NTRS)

Stacy, L. E.; Wesling, G. C.; Zimmerman, W. F.

1980-01-01

A dish Stirling solar receiver (DSSR) and a heat pipe solar receiver with TES (HPSR) for a 25 kWe dish Stirling solar power system are described. The thermal performance and cost effectiveness of each are analyzed minute by minute over the equivalent of one year of solar insolation. Existing designs of these two systems were used as a basis for the study; TES concepts for the DSSR and alternative TES concepts for the HPSR are presented. Parametric performance and cost studies were performed to determine the operating and cost characteristics of these systems. Data are reported for systems (1) without TES and with varying amounts of TES, (2) with and without a fossil fuel combustor, (3) with varying solar to fossil power input, and (4) with different system control assumptions. The principal effects of TES duration, collector area, engine efficiency, and fuel cost sensitivity are indicated. Development needs for each of the systems are discussed and the need and nature of possible future TES solar modular experiments are presented and discussed.

Gas Turbine Characteristics for a Large Civil Tilt-Rotor (LCTR)

NASA Technical Reports Server (NTRS)

Snyder, Christopher A.; Thurman, Douglas R.

2010-01-01

In support of the Fundamental Aeronautics Program, Subsonic Rotary Wing Project; an engine system study has been undertaken to help define and understand some of the major gas turbine engine parameters required to meet performance and weight requirements as defined by earlier vehicle system studies. These previous vehicle studies will be reviewed to help define gas turbine performance goals. Assumptions and analysis methods used will be described. Performance and weight estimates for a few conceptual gas turbine engines meeting these requirements will be given and discussed. Estimated performance for these conceptual engines over a wide speed variation (down to 50 percent power turbine rpm at high torque) will be presented. Finally, areas needing further effort will be suggested and discussed.

Simulating the Use of Alternative Fuels in a Turbofan Engine

NASA Technical Reports Server (NTRS)

Litt, Jonathan S.; Chin, Jeffrey Chevoor; Liu, Yuan

2013-01-01

The interest in alternative fuels for aviation has created a need to evaluate their effect on engine performance. The use of dynamic turbofan engine simulations enables the comparative modeling of the performance of these fuels on a realistic test bed in terms of dynamic response and control compared to traditional fuels. The analysis of overall engine performance and response characteristics can lead to a determination of the practicality of using specific alternative fuels in commercial aircraft. This paper describes a procedure to model the use of alternative fuels in a large commercial turbofan engine, and quantifies their effects on engine and vehicle performance. In addition, the modeling effort notionally demonstrates that engine performance may be maintained by modifying engine control system software parameters to account for the alternative fuel.

WOMBAT: A Scalable and High-performance Astrophysical Magnetohydrodynamics Code

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mendygral, P. J.; Radcliffe, N.; Kandalla, K.

2017-02-01

We present a new code for astrophysical magnetohydrodynamics specifically designed and optimized for high performance and scaling on modern and future supercomputers. We describe a novel hybrid OpenMP/MPI programming model that emerged from a collaboration between Cray, Inc. and the University of Minnesota. This design utilizes MPI-RMA optimized for thread scaling, which allows the code to run extremely efficiently at very high thread counts ideal for the latest generation of multi-core and many-core architectures. Such performance characteristics are needed in the era of “exascale” computing. We describe and demonstrate our high-performance design in detail with the intent that it maymore » be used as a model for other, future astrophysical codes intended for applications demanding exceptional performance.« less

The impact of oral health on the academic performance of disadvantaged children.

PubMed

Seirawan, Hazem; Faust, Sharon; Mulligan, Roseann

2012-09-01

We measured the impact of dental diseases on the academic performance of disadvantaged children by sociodemographic characteristics and access to care determinants We performed clinical dental examinations on 1495 disadvantaged elementary and high school students from Los Angeles County public schools. We matched data with academic achievement and attendance data provided by the school district and linked these to the child's social determinants of oral health and the impact of oral health on the child's school and the parents' school or work absences. Students with toothaches were almost 4 times more likely to have a low grade point average. About 11% of students with inaccessible needed dental care missed school compared with 4% of those with access. Per 100 elementary and high school-aged children, 58 and 80 school hours, respectively, are missed annually. Parents averaged 2.5 absent days from work or school per year because of their children's dental problems. Oral health affects students' academic performance. Studies are needed that unbundle the clinical, socioeconomic, and cultural challenges associated with this epidemic of dental disease in children.

The effect of information technology on hospital performance.

PubMed

Williams, Cynthia; Asi, Yara; Raffenaud, Amanda; Bagwell, Matt; Zeini, Ibrahim

2016-12-01

While healthcare entities have integrated various forms of health information technology (HIT) into their systems due to claims of increased quality and decreased costs, as well as various incentives, there is little available information about which applications of HIT are actually the most beneficial and efficient. In this study, we aim to assist administrators in understanding the characteristics of top performing hospitals. We utilized data from the Health Information and Management Systems Society and the Center for Medicare and Medicaid to assess 1039 hospitals. Inputs considered were full time equivalents, hospital size, and technology inputs. Technology inputs included personal health records (PHR), electronic medical records (EMRs), computerized physician order entry systems (CPOEs), and electronic access to diagnostic results. Output variables were measures of quality, hospital readmission and mortality rate. The analysis was conducted in a two-stage methodology: Data Envelopment Analysis (DEA) and Automatic Interaction Detector Analysis (AID), decision tree regression (DTreg). Overall, we found that electronic access to diagnostic results systems was the most influential technological characteristics; however organizational characteristics were more important than technological inputs. Hospitals that had the highest levels of quality indicated no excess in the use of technology input, averaging one use of a technology component. This study indicates that prudent consideration of organizational characteristics and technology is needed before investing in innovative programs.

Dynamics and cultural specifics of information needs under conditions of long-term space flight

NASA Astrophysics Data System (ADS)

Feichtinger, Elena; Shved, Dmitry; Gushin, Vadim

Life in conditions of space flight or chamber study with prolonged isolation is associated with lack of familiar stimuli (sensory deprivation), monotony, significant limitation of communication, and deficit of information and media content (Myasnikov V.I., Stepanova S.I. et al., 2000). Fulfillment of a simulation experiment or flight schedule implies necessity of performance of sophisticated tasks and decision making with limited means of external support. On the other hand, the “stream” of information from the Mission Control (MC) and PI’s (reminders about different procedures to be performed, requests of reports, etc.) is often inadequate to communication needs of crewmembers. According to the theory of “information stress” (Khananashvili M.M., 1984), a distress condition could be formed if: a) it’s necessary to process large amounts of information and make decisions under time pressure; b) there is a prolonged deficit of necessary (e.g. for decision making) information. Thus, we suppose that one of the important goals of psychological support of space or space simulation crews should be forming of favorable conditions of information environment. For that purpose, means of crew-MC information exchange (quantitative characteristics and, if possible, content of radiograms, text and video messages, etc.) should be studied, as well as peculiarities of the crewmembers’ needs in different information and media content, and their reactions to incoming information. In the space simulation experiment with 520-day isolation, communication of international crew with external parties had been studied. Dynamics of quantitative and content characteristics of the crew’s messages was related to the experiment’s stage, presence of “key” events in the schedule (periods of high autonomy, simulated “planetary landing”, etc.), as well as to events not related to the experiment (holidays, news, etc.). It was shown that characteristics of information exchange are related not only to individual traits of the subjects, but to their nationality and cultural background as well. Cultural differences in information and communication needs of Russian and European crewmembers led to necessity of adaptation of psychological support to the specifics of each group. The results of the study suggest that the problem of information, communication and media-related needs should be studied thoroughly, with consequent development of recommendations for psychological support of international crews.

A Hypermedia Representation of a Taxonomy of Usability Characteristics in Virtual Environments

DTIC Science & Technology

2003-03-01

user, organization, and social workflow; needs analysis; and user modeling. A user task analysis generates critical information used throughout all...exist specific to VE user interaction [Gabbard and others, 1999]. Typically more than one person performs guidelines-based evaluations, since it’s...unlikely that any one person could identify all if not most of an interaction design’s usability problems. Nielsen [1994] recommends three to five

Effects of Two Physical Training Paradigms on Biological and Cognitive Characteristics of Airmen: Lessons Learned

DTIC Science & Technology

2017-06-07

a 9- week physical training program, tests of physical endurance and strength , body composition analyses, biomarker collections, and cognitive tests...BDNF results to improving training , a new laboratory capability within RHCP was needed, coupled with an initial operational pilot test of that...traditional AF fitness training and that the improvements in cognitive performance would be correlated with changes in BDNF levels. Specifically, the

Child Protection and Case Management Team Performance Evaluation Tool (CPCMT P.E.T.).

DTIC Science & Technology

1982-05-01

audit): ( 1 ) Structural measures - the environment, physical facilities, personnel capability, and organizational characteristics of the program (e.g...Need objective criteria for the measurement - define terms . Examples: Under organization, what is ( 1 ) "complete interdisciplinary composition" and (5...VATALOG NUMBER Health Care Studies Div Rpt #82-00 1 4. TITLE (and SubtUo) S. TYPE OF REPORT & PERIOD COVERED Child Protection and Case Management Team

Estimation of power lithium-ion battery SOC based on fuzzy optimal decision

NASA Astrophysics Data System (ADS)

He, Dongmei; Hou, Enguang; Qiao, Xin; Liu, Guangmin

2018-06-01

In order to improve vehicle performance and safety, need to accurately estimate the power lithium battery state of charge (SOC), analyzing the common SOC estimation methods, according to the characteristics open circuit voltage and Kalman filter algorithm, using T - S fuzzy model, established a lithium battery SOC estimation method based on the fuzzy optimal decision. Simulation results show that the battery model accuracy can be improved.

Logistic Regression Analyses for Predicting Clinically Important Differences in Motor Capacity, Motor Performance, and Functional Independence after Constraint-Induced Therapy in Children with Cerebral Palsy

ERIC Educational Resources Information Center

Wang, Tien-ni; Wu, Ching-yi; Chen, Chia-ling; Shieh, Jeng-yi; Lu, Lu; Lin, Keh-chung

2013-01-01

Given the growing evidence for the effects of constraint-induced therapy (CIT) in children with cerebral palsy (CP), there is a need for investigating the characteristics of potential participants who may benefit most from this intervention. This study aimed to establish predictive models for the effects of pediatric CIT on motor and functional…

Mediate gamma radiation effects on some packaged food items

NASA Astrophysics Data System (ADS)

Inamura, Patricia Y.; Uehara, Vanessa B.; Teixeira, Christian A. H. M.; del Mastro, Nelida L.

2012-08-01

For most of prepackaged foods a 10 kGy radiation dose is considered the maximum dose needed; however, the commercially available and practically accepted packaging materials must be suitable for such application. This work describes the application of ionizing radiation on several packaged food items, using 5 dehydrated food items, 5 ready-to-eat meals and 5 ready-to-eat food items irradiated in a 60Co gamma source with a 3 kGy dose. The quality evaluation of the irradiated samples was performed 2 and 8 months after irradiation. Microbiological analysis (bacteria, fungus and yeast load) was performed. The sensory characteristics were established for appearance, aroma, texture and flavor attributes were also established. From these data, the acceptability of all irradiated items was obtained. All ready-to-eat food items assayed like manioc flour, some pâtés and blocks of raw brown sugar and most of ready-to-eat meals like sausages and chicken with legumes were considered acceptable for microbial and sensory characteristics. On the other hand, the dehydrated food items chosen for this study, such as dehydrated bacon potatoes or pea soups were not accepted by the sensory analysis. A careful dose choice and special irradiation conditions must be used in order to achieve sensory acceptability needed for the commercialization of specific irradiated food items.

NIH Career Development Awards in Clinical and Translational Science Award Institutions: Distinguishing Characteristics of Top Performing Sites

PubMed Central

Nakazono, Terry; Davidson, Pamela L.

2014-01-01

ABSTRACT Purpose To identify and disseminate the organizational characteristics of “top performing” National Institute of Health (NIH) Clinical and Translational Science Awards (CTSA) institutions in regards to career development, using the number of new K awards received per year to rank institutions and comparing these with non‐CTSA institutions. Methods The authors analyzed the organizational characteristics of all 61 CTSA institutions from 2006 to 2013 using the American Association of Medical Colleges Organizational Characteristics Database and K Award funding details using NIH RePORT. Results Five of the “top 10 performing” institutions are in the western region, and six out of the ten are public schools. Three of the “top 10 performing” institutions receive most of their K awards through two funding mechanisms—the K08 (mentored clinical scientist research award) and K23 (mentored patient‐oriented research career development awards). Notably, these three institutions lack a KL2 program. Conclusion The CTSA network of institutions is committed to developing the next generation of physician scientists in order to meet the pressing health needs of society. Educators and evaluators within this network may need to provide training to junior investigators beyond the traditional KL2 programs in order to advance their career development as physician scientists and clinical translational researchers. PMID:25044058

Disability and chronic fatigue syndrome: a focus on function.

PubMed

Ross, Susan D; Estok, Rhonda P; Frame, Diana; Stone, Linda R; Ludensky, Veronica; Levine, Cindy B

2004-05-24

Evidence was sought in the published literature on how best to measure, monitor, and treat disability in patients with chronic fatigue syndrome (CFS). A systematic review was performed of English-language literature published between January 1, 1988, and November 15, 2001. Interventional and observational studies of adults with CFS were eligible if they reported measures of disability and employment. A qualitative synthesis of results relating impairment measures to employment was performed. Of 3840 studies identified, 37 reported employment status and some measure of mental or physical impairment associated with disability. Most patients with CFS in these studies were unemployed. In 22 studies, the employment status of control subjects was also available. Only depression seemed to be associated with unemployment in patients with CFS. No other measurable impairment seemed to be consistently associated with disability or work outcomes. Only cognitive behavior therapy, rehabilitation, and exercise therapy interventions were associated with restoring the ability to work. No specific patient characteristics were identified as best predictors of positive employment outcomes. No quantitative syntheses of results were performed. For questions of disability and employment in CFS, the limitations inherent in the current literature are extensive. Methodologically rigorous, longitudinal, and interventional studies are needed to determine baseline characteristics that are associated with the inability to work and interventions that are effective in restoring the ability to work in the CFS population. Simple and consistent evaluations of functional capacity in patients with CFS are needed.

Improving The Performance of Customer Loyalty of Online Ticketing in Indonesia's Showbiz Industry

NASA Astrophysics Data System (ADS)

Dachyar, M.; Athory, E. S.

2015-06-01

Currently the entertainment industry is adopting online ticketing for supporting business from main products to profitability improvement. E-loyalty needs to be examined because are deals with less loyal customer characteristic. The sample are 249 customers whom have purchased for tickets online at least once. Data was gathered by questionnaires and analyzed by Path Analysis and Importance - Performance Analysis. The findings of the research indicate that satisfaction has the strongest relationship to e-loyalty. This study provides four improvement alternatives as a form of new business development strategy for showbiz industry in Indonesia.

Prediction and characterization of application power use in a high-performance computing environment

DOE PAGES

Bugbee, Bruce; Phillips, Caleb; Egan, Hilary; ...

2017-02-27

Power use in data centers and high-performance computing (HPC) facilities has grown in tandem with increases in the size and number of these facilities. Substantial innovation is needed to enable meaningful reduction in energy footprints in leadership-class HPC systems. In this paper, we focus on characterizing and investigating application-level power usage. We demonstrate potential methods for predicting power usage based on a priori and in situ characteristics. Lastly, we highlight a potential use case of this method through a simulated power-aware scheduler using historical jobs from a real scientific HPC system.

Detailed investigation of causes of avionics field failures

NASA Astrophysics Data System (ADS)

Kallis, J. M.; Buechler, D. W.; Richardson, Z. C.; Backes, P. G.; Lopez, S. B.; Erickson, J. J.; van Westerhuyzen, D. H.

A detailed analysis of digital and analog modules from the F-15 AN/APG-63 Radar was performed to identify the kinds, types, and number of life models based on observed failure modes, mechanisms, locations, and characteristics needed to perform a Failure Free Operating Period prediction for these items. It is found that a significant fraction of the failures of the analog module and a small fraction of those of the digital module resulted from the exacerbation of latent defects by environmental stresses. It is also found that the fraction of failures resulting from thermal cycling and vibration is small.

Heat transfer characteristics of coconut oil as phase change material to room cooling application

NASA Astrophysics Data System (ADS)

Irsyad, M.; Harmen

2017-03-01

Thermal comfort in a room is one of human needs in the workplace and dwellings, so that the use of air conditioning system in tropical countries is inevitable. This equipment has an impact on the increase of energy consumption. One method of minimizing the energy use is by using the phase change material (PCM) as thermal energy storage. This material utilizes the temperature difference between day and night for the storage and release of thermal energy. PCM development on application as a material for air cooling inlet, partitioning and interior needs to be supported by the study of heat transfer characteristics when PCM absorbs heat from ambient temperature. This study was conducted to determine the heat transfer characteristics on coconut oil as a phase change material. There are three models of experiments performed in this research. Firstly, an experiment was conducted to analyze the time that was needed by material to phase change by varying the temperature. The second experiment analyzed the heat transfer characteristics of air to PCM naturally convection. The third experiment analyzed the forced convection heat transfer on the surface of the PCM container by varying the air velocity. The data of experimental showed that, increasing ambient air temperature resulted in shorter time for phase change. At temperatures of 30°C, the time for phase change of PCM with the thickness of 8 cm was 1700 min, and it was stable at temperatures of 27°C. Increasing air temperature accelerated the phase change in the material. While for the forced convection heat transfer, PCM could reduce the air temperature in the range of 30 to 35°C at about 1 to 2°C, with a velocity of 1-3 m/s.

Investigation of the Impedance Characteristic of Human Arm for Development of Robots to Cooperate with Humans

NASA Astrophysics Data System (ADS)

Rahman, Md. Mozasser; Ikeura, Ryojun; Mizutani, Kazuki

In the near future many aspects of our lives will be encompassed by tasks performed in cooperation with robots. The application of robots in home automation, agricultural production and medical operations etc. will be indispensable. As a result robots need to be made human-friendly and to execute tasks in cooperation with humans. Control systems for such robots should be designed to work imitating human characteristics. In this study, we have tried to achieve these goals by means of controlling a simple one degree-of-freedom cooperative robot. Firstly, the impedance characteristic of the human arm in a cooperative task is investigated. Then, this characteristic is implemented to control a robot in order to perform cooperative task with humans. A human followed the motion of an object, which is moved through desired trajectories. The motion is actuated by the linear motor of the one degree-of-freedom robot system. Trajectories used in the experiments of this method were minimum jerk (the rate of change of acceleration) trajectory, which was found during human and human cooperative task and optimum for muscle movement. As the muscle is mechanically analogous to a spring-damper system, a simple second-order equation is used as models for the arm dynamics. In the model, we considered mass, stiffness and damping factor. Impedance parameter is calculated from the position and force data obtained from the experiments and based on the “Estimation of Parametric Model”. Investigated impedance characteristic of human arm is then implemented to control a robot, which performed cooperative task with human. It is observed that the proposed control methodology has given human like movements to the robot for cooperating with human.

System Life Cycle Evaluation(SM) (SLiCE): harmonizing water treatment systems with implementers' needs.

PubMed

Goodman, Joseph; Caravati, Kevin; Foote, Andrew; Nelson, Molly; Woods, Emily

2013-06-01

One of the methods proposed to improve access to clean drinking water is the mobile packaged water treatment system (MPWTS). The lack of published system performance comparisons combined with the diversity of technology available and intended operating conditions make it difficult for stakeholders to choose the system best suited for their application. MPWTS are often deployed in emergency situations, making selection of the appropriate system crucial to avoiding wasted resources and loss of life. Measurable critical-to-quality characteristics (CTQs) and a system selection tool for MPWTS were developed by utilizing relevant literature, including field studies, and implementing and comparing seven different MPWTS. The proposed System Life Cycle Evaluation (SLiCE) method uses these CTQs to evaluate the diversity in system performance and harmonize relevant performance with stakeholder preference via a selection tool. Agencies and field workers can use SLiCE results to inform and drive decision-making. The evaluation and selection tool also serves as a catalyst for communicating system performance, common design flaws, and stakeholder needs to system manufacturers. The SLiCE framework can be adopted into other emerging system technologies to communicate system performance over the life cycle of use.

Characteristics Orientation, Needs and Expectations. Symposium.

ERIC Educational Resources Information Center

2002

This document contains three papers from a symposium on characteristics orientation, needs, and expectations. "Characteristics Orientation of Emerging Professions: Implications for Research, Policy, and Practice of Continuing Professional Education" (William H. Young, Margot B. Weinstein) reports on a qualitative study that examined…

Challenges and Potential Solutions for Big Data Implementations in Developing Countries

PubMed Central

Mayan, J.C; García, M.J.; Almerares, A.A.; Househ, M.

2014-01-01

Summary Background The volume of data, the velocity with which they are generated, and their variety and lack of structure hinder their use. This creates the need to change the way information is captured, stored, processed, and analyzed, leading to the paradigm shift called Big Data. Objectives To describe the challenges and possible solutions for developing countries when implementing Big Data projects in the health sector. Methods A non-systematic review of the literature was performed in PubMed and Google Scholar. The following keywords were used: “big data”, “developing countries”, “data mining”, “health information systems”, and “computing methodologies”. A thematic review of selected articles was performed. Results There are challenges when implementing any Big Data program including exponential growth of data, special infrastructure needs, need for a trained workforce, need to agree on interoperability standards, privacy and security issues, and the need to include people, processes, and policies to ensure their adoption. Developing countries have particular characteristics that hinder further development of these projects. Conclusions The advent of Big Data promises great opportunities for the healthcare field. In this article, we attempt to describe the challenges developing countries would face and enumerate the options to be used to achieve successful implementations of Big Data programs. PMID:25123719

Diagnoses Treated in Ambulatory Care Among Homeless-Experienced Veterans

PubMed Central

Gabrielian, Sonya; Yuan, Anita H.; Andersen, Ronald M.; Gelberg, Lillian

2016-01-01

Purpose: Little is known about how permanent supported housing influences ambulatory care received by homeless persons. To fill this gap, we compared diagnoses treated in VA Greater Los Angeles (VAGLA) ambulatory care between Veterans who are formerly homeless—now housed/case managed through VA Supported Housing (“VASH Veterans”)—and currently homeless. Methods: We performed secondary database analyses of homeless-experienced Veterans (n = 3631) with VAGLA ambulatory care use from October 1, 2010 to September 30, 2011. We compared diagnoses treated—adjusting for demographics and need characteristics in regression analyses—between VASH Veterans (n = 1904) and currently homeless Veterans (n = 1727). Results: On average, considering 26 studied diagnoses, VASH (vs currently homeless) Veterans received care for more (P < .05) diagnoses (mean = 2.9/1.7). Adjusting for demographics and need characteristics, VASH Veterans were more likely (P < .05) than currently homeless Veterans to receive treatment for diagnoses across categories: chronic physical illness, acute physical illness, mental illness, and substance use disorders. Specifically, VASH Veterans had 2.5, 1.7, 2.1, and 1.8 times greater odds of receiving treatment for at least 2 condition in these categories, respectively. Among participants treated for chronic illnesses, adjusting for predisposing and need characteristics, VASH (vs currently homeless) Veterans were 9%, 8%, and 11% more likely to have 2 or more visits for chronic physical illnesses, mental illnesses, and substance use disorder, respectively. Conclusion: Among homeless-experienced Veterans, permanent supported housing may reduce disparities in the treatment of diagnoses commonly seen in ambulatory care. PMID:27343544

Projected Changes to Streamflow Characteristics in Quebec Basins as Simulated by the Canadian Regional Climate Model (CRCM4)

NASA Astrophysics Data System (ADS)

Huziy, O.; Sushama, L.; Khaliq, M.; Lehner, B.; Laprise, R.; Roy, R.

2011-12-01

According to the Intergovernmental Panel on Climate Change (IPCC, 2007), an intensification of the global hydrological cycle and increase in precipitation for some regions around the world, including the northern mid- to high-latitudes, is expected in future climate. This will have an impact on mean and extreme flow characteristics, which need to be assessed for better development of adaptation strategies. Analysis of the mean and extreme streamflow characteristics for Quebec (North-eastern Canada) basins in current climate and their projected changes in future climate are assessed using a 10 member ensemble of current (1970 - 1999) and future (2041 - 2070) Canadian RCM (CRCM4) simulations. Validation of streamflow characteristics, performed by comparing modeled values with those observed, available from the Centre d'expertise hydrique du Quebec (CEHQ) shows that the model captures reasonably well the high flows. Results suggest increase in mean and 10 year return levels of 1 day high flows, which appear significant for most of the northern basins.

Producer or purchaser: different expectations may lead to equine wastage and welfare concerns.

PubMed

Hennessy, Karen D; Quinn, Katherine M; Murphy, Jack

2008-01-01

Horses are individual, each having differential characteristics such as height, color, breeding, conformation, and temperament. These bio-characteristics often influence potential purchasers when buying horses. This study sought to investigate if producers and potential purchasers placed similar emphasis on equine bio-characteristics. Sport-horse stakeholders--n = 1377 (792 producers and 585 potential purchasers)--rated various equine bio-characteristics on a Likert psychometric response scale during a questionnaire-based survey. The study analyzed responses, using the Wilcoxan test for statistical significance. The findings indicated consensus between producers and potential purchasers for equine soundness, conformation, and movement. Producers attached significantly greater importance to gender, color, pedigree details, and performance records of the horse and the horse's siblings. In contrast, potential purchasers rated equine temperament and presence (aesthetic appeal) as significantly more important attributes. Shortcomings in suitability for purpose of the horse (such as temperament) could lead to unnecessary wastage and welfare concerns. Producers need to understand consumer expectations/demands to maximize profitability and to avoid wastage and the production of unsuitable horses.

Understanding I/O workload characteristics of a Peta-scale storage system

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kim, Youngjae; Gunasekaran, Raghul

2015-01-01

Understanding workload characteristics is critical for optimizing and improving the performance of current systems and software, and architecting new storage systems based on observed workload patterns. In this paper, we characterize the I/O workloads of scientific applications of one of the world s fastest high performance computing (HPC) storage cluster, Spider, at the Oak Ridge Leadership Computing Facility (OLCF). OLCF flagship petascale simulation platform, Titan, and other large HPC clusters, in total over 250 thousands compute cores, depend on Spider for their I/O needs. We characterize the system utilization, the demands of reads and writes, idle time, storage space utilization,more » and the distribution of read requests to write requests for the Peta-scale Storage Systems. From this study, we develop synthesized workloads, and we show that the read and write I/O bandwidth usage as well as the inter-arrival time of requests can be modeled as a Pareto distribution. We also study the I/O load imbalance problems using I/O performance data collected from the Spider storage system.« less

Study on Conversion of Municipal Plastic Wastes into Liquid Fuel Compounds, Analysis of Crdi Engine Performance and Emission Characteristics

NASA Astrophysics Data System (ADS)

Divakar Shetty, A. S.; Kumar, R. Ravi; Kumarappa, S.; Antony, A. J.

2016-09-01

The rate of economic evolution is untenable unless we save or stops misusing the fossil fuels like coal, crude oil or fossil fuels. So we are in need of start count on the alternate or renewable energy sources. In this experimental analysis an attempt has been made to investigate the conversion of municipal plastic wastes like milk covers and water bottles are selected as feed stocks to get oil using pyrolysis method, the performance analysis on CRDI diesel engine and to assess emission characteristics like HC, CO, NOX and smoke by using blends of Diesel-Plastic liquid fuels. The plastic fuel is done with the pH test using pH meter after the purification process and brought to the normal by adding KOH and NaOH. Blends of 0 to 100% plastic liquid fuel-diesel mixture have been tested for performance and emission aspect as well. The experimental results shows the efficiently convert weight of municipal waste plastics into 65% of useful liquid hydrocarbon fuels without emitting much pollutants.

A general theory of DC electromagnetic launchers

NASA Astrophysics Data System (ADS)

Engel, Thomas G.; Timpson, Erik J.

2015-08-01

The non-linear, transient operation of DC electromagnetic launchers (EMLs) complicates their theoretical understanding and prevents scaling studies and performance comparisons without the aid of detailed numerical models. This paper presents a general theory for DC electromagnetic launchers that has simplified these tasks by identifying critical EML parameters and relationships affecting the EML's voltage, current, and power scaling, as well as its performance and energy conversion efficiency. EML parameters and relationships discussed in this paper include the specific force, the operating mode, the launcher constant, the launcher characteristic velocity, the contact characteristic velocity, the energy conversion efficiency, and the kinetic power and voltage-current scaling relationship. The concepts of the ideal EML, same-scale comparisons, and EML impedance are discussed. This paper defines conditions needed for the EML to operate in the steady-state. A comparison of the general theory with experimental results of several different types of DC (i.e., non-induction) electromagnetic launchers ranging from medium velocity (100's m/s) to high velocity (1000's m/s) is performed. There is good agreement between the general theory and the experimental results.

Evaluation of an urban land surface scheme over a tropical suburban neighborhood

NASA Astrophysics Data System (ADS)

Harshan, Suraj; Roth, Matthias; Velasco, Erik; Demuzere, Matthias

2017-07-01

The present study evaluates the performance of the SURFEX (TEB/ISBA) urban land surface parametrization scheme in offline mode over a suburban area of Singapore. Model performance (diurnal and seasonal characteristics) is investigated using measurements of energy balance fluxes, surface temperatures of individual urban facets, and canyon air temperature collected during an 11-month period. Model performance is best for predicting net radiation and sensible heat fluxes (both are slightly overpredicted during daytime), but weaker for latent heat (underpredicted during daytime) and storage heat fluxes (significantly underpredicted daytime peaks and nighttime storage). Daytime surface temperatures are generally overpredicted, particularly those containing horizontal surfaces such as roofs and roads. This result, together with those for the storage heat flux, point to the need for a better characterization of the thermal and radiative characteristics of individual urban surface facets in the model. Significant variation exists in model behavior between dry and wet seasons, the latter generally being better predicted. The simple vegetation parametrization used is inadequate to represent seasonal moisture dynamics, sometimes producing unrealistically dry conditions.

Is Cognitive Rehabilitation Needed in Verbal Adults with Autism? Insights From Initial Enrollment in a Trial of Cognitive Enhancement Therapy

PubMed Central

Eack, Shaun M.; Bahorik, Amber L.; Hogarty, Susan S.; Greenwald, Deborah P.; Litschge, Maralee Y.; Mazefsky, Carla A.; Minshew, Nancy J.

2013-01-01

Cognitive rehabilitation is an emerging set of potentially effective interventions for the treatment of autism spectrum disorder, yet the applicability of these approaches for “high functioning” adults who have normative levels of intelligence remains unexplored. This study examined the initial cognitive performance characteristics of 40 verbal adults with autism enrolled in a pilot trial of Cognitive Enhancement Therapy to investigate the need for cognitive rehabilitation in this population. Results revealed marked and broad deficits across neurocognitive and social-cognitive domains, despite above-average IQ. Areas of greatest impairment included processing speed, cognitive flexibility, and emotion perception and management. These findings indicate the need for comprehensive interventions designed to enhance cognition among verbal adults with autism who have intact intellectual functioning. PMID:23381484

Trauma center staffing, infrastructure, and patient characteristics that influence trauma center need.

PubMed

Faul, Mark; Sasser, Scott M; Lairet, Julio; Mould-Millman, Nee-Kofi; Sugerman, David

2015-01-01

The most effective use of trauma center resources helps reduce morbidity and mortality, while saving costs. Identifying critical infrastructure characteristics, patient characteristics and staffing components of a trauma center associated with the proportion of patients needing major trauma care will help planners create better systems for patient care. We used the 2009 National Trauma Data Bank-Research Dataset to determine the proportion of critically injured patients requiring the resources of a trauma center within each Level I-IV trauma center (n=443). The outcome variable was defined as the portion of treated patients who were critically injured. We defined the need for critical trauma resources and interventions ("trauma center need") as death prior to hospital discharge, admission to the intensive care unit, or admission to the operating room from the emergency department as a result of acute traumatic injury. Generalized Linear Modeling (GLM) was used to determine how hospital infrastructure, staffing Levels, and patient characteristics contributed to trauma center need. Nonprofit Level I and II trauma centers were significantly associated with higher levels of trauma center need. Trauma centers that had a higher percentage of transferred patients or a lower percentage of insured patients were associated with a higher proportion of trauma center need. Hospital infrastructure characteristics, such as bed capacity and intensive care unit capacity, were not associated with trauma center need. A GLM for Level III and IV trauma centers showed that the number of trauma surgeons on staff was associated with trauma center need. Because the proportion of trauma center need is predominantly influenced by hospital type, transfer frequency, and insurance status, it is important for administrators to consider patient population characteristics of the catchment area when planning the construction of new trauma centers or when coordinating care within state or regional trauma systems.

1987 overview of free-piston Stirling technology for space power application

NASA Technical Reports Server (NTRS)

Slaby, Jack G.; Alger, Donald L.

1987-01-01

The Lewis Research Center program concerned with the development of a free-piston Stirling engine for space-power applications is examined. The system mass of a Stirling system is compared to that of a Brayton system for the same peak temperature and output power; the advantages of the Stirling system are discussed. The predicted and experimental performances of the 25 kWe opposed-piston space power demonstrator engine are evaluated. It is determined that in order to enhance performance the regenerator needs to be modified, and the gas bearing flow between the displacer and power piston needs to be isolated in order to increase the operating stroke. Identification and correction of the energy losses, the design and operation of the linear alternator, and heat exchange concepts are considered. The design parameters and conceptual design characteristics for a 25 kWe single-cylinder free-piston Stirling space-power converter are described.

Evaluation matters: lessons learned on the evaluation of surgical teaching.

PubMed

Woods, Nicole N

2011-01-01

The traditional system of academic promotion and tenure can make it difficult to reward those who excel at surgical teaching. A successful faculty evaluation process can provide the objective measures of teaching performance needed for performance appraisals and promotion decisions. Over the course of two decades, an extensive faculty evaluation process has been developed in the Department of Surgery at the University of Toronto. This paper presents some of the non-psychometric characteristics of that system. Faculty awareness of the evaluation process, the consistency of its application, trainee anonymity and the materiality of the results are described key factors of a faculty evaluation system that meets the assessment needs of individual teachers and raises the profile of teaching in surgical departments. Copyright © 2010 Royal College of Surgeons of Edinburgh (Scottish charity number SC005317) and Royal College of Surgeons in Ireland. Published by Elsevier Ltd. All rights reserved.

Linear and nonlinear schemes applied to pitch control of wind turbines.

PubMed

Geng, Hua; Yang, Geng

2014-01-01

Linear controllers have been employed in industrial applications for many years, but sometimes they are noneffective on the system with nonlinear characteristics. This paper discusses the structure, performance, implementation cost, advantages, and disadvantages of different linear and nonlinear schemes applied to the pitch control of the wind energy conversion systems (WECSs). The linear controller has the simplest structure and is easily understood by the engineers and thus is widely accepted by the industry. In contrast, nonlinear schemes are more complicated, but they can provide better performance. Although nonlinear algorithms can be implemented in a powerful digital processor nowadays, they need time to be accepted by the industry and their reliability needs to be verified in the commercial products. More information about the system nonlinear feature is helpful to simplify the controller design. However, nonlinear schemes independent of the system model are more robust to the uncertainties or deviations of the system parameters.

Wire and Cable Cold Bending Test

NASA Technical Reports Server (NTRS)

Colozza, Anthony

2010-01-01

One of the factors in assessing the applicability of wire or cable on the lunar surface is its flexibility under extreme cold conditions. Existing wire specifications did not address their mechanical behavior under cold, cryogenic temperature conditions. Therefore tests were performed to provide this information. To assess this characteristic 35 different insulated wire and cable pieces were cold soaked in liquid nitrogen. The segments were then subjected to bending and the force was recorded. Any failure of the insulation or jacketing was also documented for each sample tested. The bending force tests were performed at room temperature to provide a comparison to the change in force needed to bend the samples due to the low temperature conditions. The results from the bending tests were plotted and showed how various types of insulated wire and cable responded to bending under cold conditions. These results were then used to estimate the torque needed to unroll the wire under these low temperature conditions.

Demographics Affecting Parental Expectations from Early Deaf Intervention

ERIC Educational Resources Information Center

Ingber, Sara; Dromi, Esther

2009-01-01

Parent participation in rehabilitation programs for children with special needs requires program designers to accommodate each family's particular needs and characteristics. This study investigated maternal reports on various characteristics of 50 Israeli deaf preschoolers, their parents, and families, and examined these characteristics' links…

Characterizing X-ray Attenuation of Containerized Cargo

DOE Office of Scientific and Technical Information (OSTI.GOV)

Birrer, N.; Divin, C.; Glenn, S.

X-ray inspection systems can be used to detect radiological and nuclear threats in imported cargo. In order to better understand performance of these systems, the attenuation characteristics of imported cargo need to be determined. This project focused on developing image processing algorithms for segmenting cargo and using x-ray attenuation to quantify equivalent steel thickness to determine cargo density. These algorithms were applied to over 450 cargo radiographs. The results are summarized in this report.

High-resolution MRI in detecting subareolar breast abscess.

PubMed

Fu, Peifen; Kurihara, Yasuyuki; Kanemaki, Yoshihide; Okamoto, Kyoko; Nakajima, Yasuo; Fukuda, Mamoru; Maeda, Ichiro

2007-06-01

Because subareolar breast abscess has a high recurrence rate, a more effective imaging technique is needed to comprehensively visualize the lesions and guide surgery. We performed a high-resolution MRI technique using a microscopy coil to reveal the characteristics and extent of subareolar breast abscess. High-resolution MRI has potential diagnostic value in subareolar breast abscess. This technique can be used to guide surgery with the aim of reducing the recurrence rate.

Latest Trends of Vacuum Circuit Breaker and Related Technologies

NASA Astrophysics Data System (ADS)

Kozono, Hideaki; Tanimizu, Toru

Vacuum Circuit Breakers (VCBs) have been widely used for medium voltage level, because of their performance: compact size, light weight, maintenance free operations and environment-friendly characteristics. They become most comfortable breakers for our needs from other breakers: oil, air, magnetic blast and gas. In this paper the history of vacuum, and latest trends of circuit breakers and related technologies are described, as well as merits or demerits of using vacuum technologies.

Network survivability performance (computer diskette)

NASA Astrophysics Data System (ADS)

1993-11-01

File characteristics: Data file; 1 file. Physical description: 1 computer diskette; 3 1/2 in.; high density; 2.0MB. System requirements: Mac; Word. This technical report has been developed to address the survivability of telecommunications networks including services. It responds to the need for a common understanding of, and assessment techniques for network survivability, availability, integrity, and reliability. It provides a basis for designing and operating telecommunication networks to user expectations for network survivability.

[Nutrition in the sport practice: adaptation of the food guide pyramid to the characteristics of athletes diet].

PubMed

González-Gross, M; Gutiérrez, A; Mesa, J L; Ruiz-Ruiz, J; Castillo, M J

2001-12-01

In spite of all the advances in sport nutrition and the importance of an adequate food intake in order to improve sport performance, both recreational and professional athletes forget frequently to include planning an optimum diet and fluid intake in their global strategy for performance. Physiological and metabolic adaptations produced as a consequence of physical exercise lead to the necessity of increasing caloric (in accordance to energy output) and protein (based on the trophic needs of the organism) intake. Likewise, paying major attention to vitamin and mineral intake, specifically B vitamins and zinc and chromium, is required, in order to optimize carbohydrate metabolism, the ultimate limiting factor for sport performance. During the training phase, 60% of calories should come from carbohydrates, protein intake should be 1.2-2 g/kg/day and athletes should follow the recommendations of the food guide pyramid. During the pre-, per- and post-competition phase the healthy aspect of the diet passes to a second level, in order to obtain good sport performance and to guarantee a fast and effective recovery. Again, carbohydrates with a high or medium glycaemic index and water are the nutrients which have to be calculated more thoroughly. In conclusion, athletes have to follow a diet that is adequate to their higher energy output and to their higher metabolic turnover. The food guide pyramid is a graphic expression which facilitates the comprehension and following of a healthy diet. In the present article, the authors introduce the pyramid adapted to the characteristics of sports nutrition, with easy-to-follow practical recommendations regarding the kind and amounts of foodstuffs that should be consumed in order to cover nutrient needs of people who exercise regularly.

Assessment of Lithium-based Battery Electrolytes Developed under the NASA PERS Program

NASA Technical Reports Server (NTRS)

Bennett, William R.; Baldwin, Richard S.

2006-01-01

Recently, NASA formally completed the Polymer Energy Rechargeable System (PERS) Program, which was established in 2000 in collaboration with the Air Force Research Laboratory (AFRL) to support the development of polymer-based, lithium-based cell chemistries and battery technologies to address the next generation of aerospace applications and mission needs. The goal of this program was to ultimately develop an advanced, space-qualified battery technology, which embodied a solid polymer electrolyte (SPE) and complementary components, with improved performance characteristics that would address future aerospace battery requirements. Programmatically, the PERS initiative exploited both interagency collaborations to address common technology and engineering issues and the active participation of academia and private industry. The initial program phases focused on R&D activities to address the critical technical issues and challenges at the cell level. A variety of cell and polymeric electrolyte concepts were pursued as part of the development efforts undertaken at numerous governmental, industrial and academic laboratories. Numerous candidate electrolyte materials were developed, synthesized and optimized for evaluation. Utilizing the component screening facility and the "standardized" test procedures developed at the NASA Glenn Research Center, electrochemical screening and performance evaluations of promising candidate materials were completed. This overview summarizes test results for a variety of candidate electrolyte materials that were developed under the PERS Program. Electrolyte properties are contrasted and compared to the original project goals, and the strengths and weaknesses of the electrolyte chemistries are discussed. Limited cycling data for full-cells using lithium metal and vanadium oxide electrodes are also presented. Based on measured electrolyte properties, the projected performance characteristics and temperature limitations of batteries utilizing the advanced electrolytes and components have been estimated. Limitations for the achievement of practical performance levels are also discussed, as well as needs for future research and development.

Quality of Care Improves for Patients with Diabetes in Medicare Shared Savings Accountable Care Organizations: Organizational Characteristics Associated with Performance.

PubMed

Fraze, Taressa K; Lewis, Valerie A; Tierney, Emily; Colla, Carrie H

2017-12-06

Accountable care organizations (ACOs), a primary care-centric delivery and payment model, aim to promote integrated population health, which may improve care for those with chronic conditions such as diabetes. Research has shown that, overall, the ACO model is effective at reducing costs, but there is substantial variation in how effective different types of ACOs are at impacting costs and improving care delivery. This study examines how ACO organizational characteristics - such as composition, staffing, care management, and experiences with health reform - were associated with quality of care delivered to patients with diabetes. Secondary data were analyzed retrospectively to examine Medicare Shared Savings Program (MSSP) ACOs' performance on diabetes metrics in the first 2 years of ACO contracts. Ordinary least squares was used to analyze 162 MSSP ACOs with publicly available performance data and the National Survey of ACOs. ACOs improved performance significantly for patients with diabetes between contract years 1 and 2. In year 1, also having a private payer contract and an increased number of services within the ACO were positively associated with performance, while having a community health center or a hospital were negatively associated with performance. Better performance in year 1 was negatively associated with improved performance in year 2. This study found that ACOs substantively improved diabetes management within initial contract years. ACOs may need different types of support throughout their contracts to ensure continued improvements in performance.

Perspectives to Performance of Environment and Health Assessments and Models—From Outputs to Outcomes?

PubMed Central

Pohjola, Mikko V.; Pohjola, Pasi; Tainio, Marko; Tuomisto, Jouni T.

2013-01-01

The calls for knowledge-based policy and policy-relevant research invoke a need to evaluate and manage environment and health assessments and models according to their societal outcomes. This review explores how well the existing approaches to assessment and model performance serve this need. The perspectives to assessment and model performance in the scientific literature can be called: (1) quality assurance/control, (2) uncertainty analysis, (3) technical assessment of models, (4) effectiveness and (5) other perspectives, according to what is primarily seen to constitute the goodness of assessments and models. The categorization is not strict and methods, tools and frameworks in different perspectives may overlap. However, altogether it seems that most approaches to assessment and model performance are relatively narrow in their scope. The focus in most approaches is on the outputs and making of assessments and models. Practical application of the outputs and the consequential outcomes are often left unaddressed. It appears that more comprehensive approaches that combine the essential characteristics of different perspectives are needed. This necessitates a better account of the mechanisms of collective knowledge creation and the relations between knowledge and practical action. Some new approaches to assessment, modeling and their evaluation and management span the chain from knowledge creation to societal outcomes, but the complexity of evaluating societal outcomes remains a challenge. PMID:23803642

Performance Evaluation and Parameter Identification on DROID III

NASA Technical Reports Server (NTRS)

Plumb, Julianna J.

2011-01-01

The DROID III project consisted of two main parts. The former, performance evaluation, focused on the performance characteristics of the aircraft such as lift to drag ratio, thrust required for level flight, and rate of climb. The latter, parameter identification, focused on finding the aerodynamic coefficients for the aircraft using a system that creates a mathematical model to match the flight data of doublet maneuvers and the aircraft s response. Both portions of the project called for flight testing and that data is now available on account of this project. The conclusion of the project is that the performance evaluation data is well-within desired standards but could be improved with a thrust model, and that parameter identification is still in need of more data processing but seems to produce reasonable results thus far.

Segment and fit thresholding: a new method for image analysis applied to microarray and immunofluorescence data.

PubMed

Ensink, Elliot; Sinha, Jessica; Sinha, Arkadeep; Tang, Huiyuan; Calderone, Heather M; Hostetter, Galen; Winter, Jordan; Cherba, David; Brand, Randall E; Allen, Peter J; Sempere, Lorenzo F; Haab, Brian B

2015-10-06

Experiments involving the high-throughput quantification of image data require algorithms for automation. A challenge in the development of such algorithms is to properly interpret signals over a broad range of image characteristics, without the need for manual adjustment of parameters. Here we present a new approach for locating signals in image data, called Segment and Fit Thresholding (SFT). The method assesses statistical characteristics of small segments of the image and determines the best-fit trends between the statistics. Based on the relationships, SFT identifies segments belonging to background regions; analyzes the background to determine optimal thresholds; and analyzes all segments to identify signal pixels. We optimized the initial settings for locating background and signal in antibody microarray and immunofluorescence data and found that SFT performed well over multiple, diverse image characteristics without readjustment of settings. When used for the automated analysis of multicolor, tissue-microarray images, SFT correctly found the overlap of markers with known subcellular localization, and it performed better than a fixed threshold and Otsu's method for selected images. SFT promises to advance the goal of full automation in image analysis.

Segment and Fit Thresholding: A New Method for Image Analysis Applied to Microarray and Immunofluorescence Data

PubMed Central

Ensink, Elliot; Sinha, Jessica; Sinha, Arkadeep; Tang, Huiyuan; Calderone, Heather M.; Hostetter, Galen; Winter, Jordan; Cherba, David; Brand, Randall E.; Allen, Peter J.; Sempere, Lorenzo F.; Haab, Brian B.

2016-01-01

Certain experiments involve the high-throughput quantification of image data, thus requiring algorithms for automation. A challenge in the development of such algorithms is to properly interpret signals over a broad range of image characteristics, without the need for manual adjustment of parameters. Here we present a new approach for locating signals in image data, called Segment and Fit Thresholding (SFT). The method assesses statistical characteristics of small segments of the image and determines the best-fit trends between the statistics. Based on the relationships, SFT identifies segments belonging to background regions; analyzes the background to determine optimal thresholds; and analyzes all segments to identify signal pixels. We optimized the initial settings for locating background and signal in antibody microarray and immunofluorescence data and found that SFT performed well over multiple, diverse image characteristics without readjustment of settings. When used for the automated analysis of multi-color, tissue-microarray images, SFT correctly found the overlap of markers with known subcellular localization, and it performed better than a fixed threshold and Otsu’s method for selected images. SFT promises to advance the goal of full automation in image analysis. PMID:26339978

Effects of simulator motion and visual characteristics on rotorcraft handling qualities evaluations

NASA Technical Reports Server (NTRS)

Mitchell, David G.; Hart, Daniel C.

1993-01-01

The pilot's perceptions of aircraft handling qualities are influenced by a combination of the aircraft dynamics, the task, and the environment under which the evaluation is performed. When the evaluation is performed in a groundbased simulator, the characteristics of the simulation facility also come into play. Two studies were conducted on NASA Ames Research Center's Vertical Motion Simulator to determine the effects of simulator characteristics on perceived handling qualities. Most evaluations were conducted with a baseline set of rotorcraft dynamics, using a simple transfer-function model of an uncoupled helicopter, under different conditions of visual time delays and motion command washout filters. Differences in pilot opinion were found as the visual and motion parameters were changed, reflecting a change in the pilots' perceptions of handling qualities, rather than changes in the aircraft model itself. The results indicate a need for tailoring the motion washout dynamics to suit the task. Visual-delay data are inconclusive but suggest that it may be better to allow some time delay in the visual path to minimize the mismatch between visual and motion, rather than eliminate the visual delay entirely through lead compensation.

Three-dimensional laser radar modeling

NASA Astrophysics Data System (ADS)

Steinvall, Ove K.; Carlsson, Tomas

2001-09-01

Laser radars have the unique capability to give intensity and full 3-D images of an object. Doppler lidars can give velocity and vibration characteristics of an objects. These systems have many civilian and military applications such as terrain modelling, depth sounding, object detection and classification as well as object positioning. In order to derive the signal waveform from the object one has to account for the laser pulse time characteristics, media effects such as the atmospheric attenuation and turbulence effects or scattering properties, the target shape and reflection (BRDF), speckle noise together with the receiver and background noise. Finally the type of waveform processing (peak detection, leading edge etc.) is needed to model the sensor output to be compared with observations. We have developed a computer model which models performance of a 3-D laser radar. We will give examples of signal waveforms generated from model different targets calculated by integrating the laser beam profile in space and time over the target including reflection characteristics during different speckle and turbulence conditions. The result will be of help when designing and using new laser radar systems. The importance of different type of signal processing of the waveform in order to fulfil performance goals will be shown.

Absorbent products for incontinence: 'treatment effects' and impact on quality of life.

PubMed

Getliffe, Kathryn; Fader, Mandy; Cottenden, Alan; Jamieson, Katharine; Green, Nicholas

2007-10-01

This study aimed to determine how the use and characteristics of absorbent products for incontinence impact on women's quality of life, and to examine the concept of 'treatment effects' in the context of pad use. Key pad performance characteristics were identified from the literature and focus group work. Semi-structured interviews with 99 women with light incontinence were used to investigate the impact of pad use on women's quality of life, including both positive and negative 'treatment effects', and to rank pad characteristics by their importance. Achieving effective and discrete containment of urine was the dominant factor impacting on women's lives. Sub-themes embraced physical effects, psychological impact and social functioning. The five pad characteristics ranked most important for day time use were: 'to hold urine, to contain smell, to stay in place, discreteness, and comfort when wet. For night use discreteness was replaced by to keep skin dry'. High levels of reported anxiety were associated with perceived risk of poor pad performance, lack of discreteness and need for complex regimes for pad management. Insufficient attention has been paid to the balance between the beneficial and negative treatment effects of absorbent pads to date. Existing continence-related quality of life measures are not designed for conditions where change in symptoms is not an outcome measure. The study findings provide the basis for developing a more sensitive, patient-oriented, quality of life measure for pad-users which can aid product selection, new product development and inform future evaluative comparisons between products/products and treatments. This paper illustrates the complex influence on quality of life caused by using absorbent pads to contain incontinence. It raises awareness of the importance of careful selection of the most appropriate pad for each individual to minimize unfavourable side effects, and the need for a new quality of life measure designed for pad-users.

Acoustic, Flow Related, and Performance Related Experimental Results for Generation 1.5 High Speed Civil Transport (HSCT) 2-Dimensional Exhaust Nozzles

NASA Technical Reports Server (NTRS)

Salikuddin, M.; Wisler, S.; Majjigi, R.

2004-01-01

The principle objectives of the current program were to experimentally investigate the repeatability of acoustic and aerodynamic characteristics of 2D-CD mixer-ejector nozzles and the effects on the acoustic and aerodynamic characteristics of 2D mixer-ejectors due to (1) the configurational variations, which include mixers with aligned CD chutes, aligned convergent chutes, and staggered CD chutes and aerodynamic cycle variables, (2) treatment variations by using different treatment materials, treating the ejector with varying area, location, and treatment thickness for a mixer-ejector configuration, and (3) secondary inlet shape (i.e., a more realistic inlet) and the blockage across the inlet (a possible fin-like structure needed for installation purpose) by modifying one of the inlet of a mixer-ejector configuration. The objectives also included the measurement dynamic pressures internal to the ejector for a few selected configuration to examine the internal noise characteristics.

High‐throughput automated scoring of Ki67 in breast cancer tissue microarrays from the Breast Cancer Association Consortium

PubMed Central

Howat, William J; Daley, Frances; Zabaglo, Lila; McDuffus, Leigh‐Anne; Blows, Fiona; Coulson, Penny; Raza Ali, H; Benitez, Javier; Milne, Roger; Brenner, Herman; Stegmaier, Christa; Mannermaa, Arto; Chang‐Claude, Jenny; Rudolph, Anja; Sinn, Peter; Couch, Fergus J; Tollenaar, Rob A.E.M.; Devilee, Peter; Figueroa, Jonine; Sherman, Mark E; Lissowska, Jolanta; Hewitt, Stephen; Eccles, Diana; Hooning, Maartje J; Hollestelle, Antoinette; WM Martens, John; HM van Deurzen, Carolien; Investigators, kConFab; Bolla, Manjeet K; Wang, Qin; Jones, Michael; Schoemaker, Minouk; Broeks, Annegien; van Leeuwen, Flora E; Van't Veer, Laura; Swerdlow, Anthony J; Orr, Nick; Dowsett, Mitch; Easton, Douglas; Schmidt, Marjanka K; Pharoah, Paul D; Garcia‐Closas, Montserrat

2016-01-01

Abstract Automated methods are needed to facilitate high‐throughput and reproducible scoring of Ki67 and other markers in breast cancer tissue microarrays (TMAs) in large‐scale studies. To address this need, we developed an automated protocol for Ki67 scoring and evaluated its performance in studies from the Breast Cancer Association Consortium. We utilized 166 TMAs containing 16,953 tumour cores representing 9,059 breast cancer cases, from 13 studies, with information on other clinical and pathological characteristics. TMAs were stained for Ki67 using standard immunohistochemical procedures, and scanned and digitized using the Ariol system. An automated algorithm was developed for the scoring of Ki67, and scores were compared to computer assisted visual (CAV) scores in a subset of 15 TMAs in a training set. We also assessed the correlation between automated Ki67 scores and other clinical and pathological characteristics. Overall, we observed good discriminatory accuracy (AUC = 85%) and good agreement (kappa = 0.64) between the automated and CAV scoring methods in the training set. The performance of the automated method varied by TMA (kappa range= 0.37–0.87) and study (kappa range = 0.39–0.69). The automated method performed better in satisfactory cores (kappa = 0.68) than suboptimal (kappa = 0.51) cores (p‐value for comparison = 0.005); and among cores with higher total nuclei counted by the machine (4,000–4,500 cells: kappa = 0.78) than those with lower counts (50–500 cells: kappa = 0.41; p‐value = 0.010). Among the 9,059 cases in this study, the correlations between automated Ki67 and clinical and pathological characteristics were found to be in the expected directions. Our findings indicate that automated scoring of Ki67 can be an efficient method to obtain good quality data across large numbers of TMAs from multicentre studies. However, robust algorithm development and rigorous pre‐ and post‐analytical quality control procedures are necessary in order to ensure satisfactory performance. PMID:27499923

Measuring corporate culture to ensure mission fulfillment.

PubMed

Hulsebus-Fong, C

1988-11-01

Ancilla Systems, Inc., Elk Grove Village, Il, developed a mission-based performance evaluation program to provide tangible evidence of mission fulfillment and ensure the provision of high-quality healthcare. the program--Characteristics of Service--translates the language of healthcare action and evaluates corporate culture to ensure that it fulfills the expectations of its sponsor. The nine Characteristics of Service are: Respect for the dignity of all persons. Orientation toward the family unit. Quality and personalized services. Local health systems with a spectrum of services responsive to the unique needs of the community. Formal and informal partnerships with physicians. Active participation and collaboration with related community service agencies and other healthcare providers. Faithfulness to Catholic identity through close relationships with Church and religious institute resources. Effective political advocacy through education. Research and development of innovative approaches to healthcare. In establishing the behavior standards that would exemplify the characteristics, program developers used terms that correspond to specific, observable, measurable performance. All healthcare facilities are evaluated on how well they meet the behavior standards. The evaluation process includes data collection, analysis, and a final report. Data collection begins with a review of regular hospital-conducted surveys, which provide quantifiable information to measure performance against key expected behaviors. Additional data are derived from medical staff development plans and the monthly quality assurance audit. On-site surveys fill information gaps that remain after all written reports are collected.

Prevalence and Correlates of Functional Status in an Older Community-Representative Sample in Brazil

PubMed Central

Blay, Sergio L; Andreoli, Sergio B; Gastal, Fábio L

2013-01-01

Objective Information on dependency level of elderly in rapidly aging developing countries is limited, but is needed to ascertain extent of need for help with activities of daily living (ADLs). Methods In-person information was obtained in 1995 from a statewide survey of representative community residents ≥60 years of age in the state of Rio Grande do Sul, Brazil (N=7040), on demographic characteristics, health conditions, social ties, health behaviors, and ADL performance. Results Nearly 40% needed help with one or more ADLs. In controlled analyses, need for help approximately doubled with each succeeding decade. Increased education and income and regular physical activity reduced risk. Selected health conditions (stroke, depression, poor self-rated health) were consistently associated with need for help, Discussion A large proportion of noninstitutionalized elderly have ADL problems. In addition to health care, interventions promoting equity of access to education and economic opportunity could reduce ADL dependency in coming generations. PMID:20147651

Characteristics of Teacher-Identified Students with Special Educational Needs in Dutch Mainstream Primary Education

ERIC Educational Resources Information Center

Bruggink, M.; Goei, S. L.; Koot, H. M.

2013-01-01

Background: Traditionally, special educational needs (SEN) were often defined in terms of child deficits. Recently, there has been a tendency to define SEN in terms of (additional) support needed in the classroom. However, little is known about how teachers define students with special educational needs. To close this gap, characteristics of…

Bio-Optics of the Chesapeake Bay from Measurements and Radiative Transfer Calculations

NASA Technical Reports Server (NTRS)

Tzortziou, Maria; Herman, Jay R.; Gallegos, Charles L.; Neale, Patrick J.; Subramaniam, Ajit; Harding, Lawrence W., Jr.; Ahmad, Ziauddin

2005-01-01

We combined detailed bio-optical measurements and radiative transfer (RT) modeling to perform an optical closure experiment for optically complex and biologically productive Chesapeake Bay waters. We used this experiment to evaluate certain assumptions commonly used when modeling bio-optical processes, and to investigate the relative importance of several optical characteristics needed to accurately model and interpret remote sensing ocean-color observations in these Case 2 waters. Direct measurements were made of the magnitude, variability, and spectral characteristics of backscattering and absorption that are critical for accurate parameterizations in satellite bio-optical algorithms and underwater RT simulations. We found that the ratio of backscattering to total scattering in the mid-mesohaline Chesapeake Bay varied considerably depending on particulate loading, distance from land, and mixing processes, and had an average value of 0.0128 at 530 nm. Incorporating information on the magnitude, variability, and spectral characteristics of particulate backscattering into the RT model, rather than using a volume scattering function commonly assumed for turbid waters, was critical to obtaining agreement between RT calculations and measured radiometric quantities. In situ measurements of absorption coefficients need to be corrected for systematic overestimation due to scattering errors, and this correction commonly employs the assumption that absorption by particulate matter at near infrared wavelengths is zero.

Performance characteristics of aerodynamically optimum turbines for wind energy generators

NASA Technical Reports Server (NTRS)

Rohrbach, C.; Worobel, R.

1975-01-01

This paper presents a brief discussion of the aerodynamic methodology for wind energy generator turbines, an approach to the design of aerodynamically optimum wind turbines covering a broad range of design parameters, some insight on the effect on performance of nonoptimum blade shapes which may represent lower fabrication costs, the annual wind turbine energy for a family of optimum wind turbines, and areas of needed research. On the basis of the investigation, it is concluded that optimum wind turbines show high performance over a wide range of design velocity ratios; that structural requirements impose constraints on blade geometry; that variable pitch wind turbines provide excellent power regulation and that annual energy output is insensitive to design rpm and solidity of optimum wind turbines.

Principal Component Analysis for pulse-shape discrimination of scintillation radiation detectors

NASA Astrophysics Data System (ADS)

Alharbi, T.

2016-01-01

In this paper, we report on the application of Principal Component analysis (PCA) for pulse-shape discrimination (PSD) of scintillation radiation detectors. The details of the method are described and the performance of the method is experimentally examined by discriminating between neutrons and gamma-rays with a liquid scintillation detector in a mixed radiation field. The performance of the method is also compared against that of the conventional charge-comparison method, demonstrating the superior performance of the method particularly at low light output range. PCA analysis has the important advantage of automatic extraction of the pulse-shape characteristics which makes the PSD method directly applicable to various scintillation detectors without the need for the adjustment of a PSD parameter.

Fronto-Parietal gray matter and white matter efficiency differentially predict intelligence in males and females.

PubMed

Ryman, Sephira G; Yeo, Ronald A; Witkiewitz, Katie; Vakhtin, Andrei A; van den Heuvel, Martijn; de Reus, Marcel; Flores, Ranee A; Wertz, Christopher R; Jung, Rex E

2016-11-01

While there are minimal sex differences in overall intelligence, males, on average, have larger total brain volume and corresponding regional brain volumes compared to females, measures that are consistently related to intelligence. Limited research has examined which other brain characteristics may differentially contribute to intelligence in females to facilitate equal performance on intelligence measures. Recent reports of sex differences in the neural characteristics of the brain further highlight the need to differentiate how the structural neural characteristics relate to intellectual ability in males and females. The current study utilized a graph network approach in conjunction with structural equation modeling to examine potential sex differences in the relationship between white matter efficiency, fronto-parietal gray matter volume, and general cognitive ability (GCA). Participants were healthy adults (n = 244) who completed a battery of cognitive testing and underwent structural neuroimaging. Results indicated that in males, a latent factor of fronto-parietal gray matter was significantly related to GCA when controlling for total gray matter volume. In females, white matter efficiency and total gray matter volume were significantly related to GCA, with no specificity of the fronto-parietal gray matter factor over and above total gray matter volume. This work highlights that different neural characteristics across males and females may contribute to performance on intelligence measures. Hum Brain Mapp 37:4006-4016, 2016. © 2016 Wiley Periodicals, Inc. © 2016 Wiley Periodicals, Inc.

Can soft biometric traits assist user recognition?

NASA Astrophysics Data System (ADS)

Jain, Anil K.; Dass, Sarat C.; Nandakumar, Karthik

2004-08-01

Biometrics is rapidly gaining acceptance as the technology that can meet the ever increasing need for security in critical applications. Biometric systems automatically recognize individuals based on their physiological and behavioral characteristics. Hence, the fundamental requirement of any biometric recognition system is a human trait having several desirable properties like universality, distinctiveness, permanence, collectability, acceptability, and resistance to circumvention. However, a human characteristic that possesses all these properties has not yet been identified. As a result, none of the existing biometric systems provide perfect recognition and there is a scope for improving the performance of these systems. Although characteristics like gender, ethnicity, age, height, weight and eye color are not unique and reliable, they provide some information about the user. We refer to these characteristics as "soft" biometric traits and argue that these traits can complement the identity information provided by the primary biometric identifiers like fingerprint and face. This paper presents the motivation for utilizing soft biometric information and analyzes how the soft biometric traits can be automatically extracted and incorporated in the decision making process of the primary biometric system. Preliminary experiments were conducted on a fingerprint database of 160 users by synthetically generating soft biometric traits like gender, ethnicity, and height based on known statistics. The results show that the use of additional soft biometric user information significantly improves (approximately 6%) the recognition performance of the fingerprint biometric system.

Treatment bed microbiological control

NASA Technical Reports Server (NTRS)

Janauer, Gilbert E.; Fitzpatrick, Timothy W.; Kril, Michael B.; Wilber, Georgia A.; Sauer, Richard L.

1987-01-01

The effects of microbial fouling on treatment bed (TB) performance are being studied. Fouling of activated carbon (AC) and ion exchange resins (IEX) by live and devitalized bacteria can cause decreased capacity for selected sorbates with AC and IEX TB. More data are needed on organic species removal in the trace region of solute sorption isotherms. TB colonization was prevented by nonclassical chemical disinfectant compositions (quaternary ammonium resins) applied in suitable configurations. Recently, the protection of carbon beds via direct disinfectant impregnation has shown promise. Effects (of impregnation) upon bed sorption/removal characteristics are to be studied with representative contaminants. The potential need to remove solutes added or produced during water disinfection and/or TB microbiological control must be investigated.

The Physical Characteristics by Sex and Age for Custody Assistants from a Law Enforcement Agency.

PubMed

Lockie, Robert G; Orr, Robin M; Stierli, Michael; Cesario, Karly A; Moreno, Matthew R; Bloodgood, Ashley M; Dulla, Joseph M; Dawes, J Jay

2018-01-17

Custody assistants (CAs) are a position within a law enforcement agency who are responsible for assisting officers with maintaining security in correctional facilities. Unlike other positions, CAs may not be required to complete physical testing prior to being hired. This lack of testing could influence the characteristics of CAs who attend academy training. Therefore, retrospective analysis of performance test data for 108 officers (69 males, 39 females) was conducted. The tests included: grip strength for both hands; number of push-ups and sit-ups in 60 seconds; 201 m (220 yard) and 2.4 km runs; and maximal aerobic capacity (V˙O2max) estimated from the 2.4 km run. Data were stratified by sex and age (≤24 years, 25-29 years, 30-34 years, ≥35 years). Independent samples t-tests (p < 0.05) calculated differences between males and females. To compare age groups, a one-way ANOVA with Bonferroni post hoc was utilized (p < 0.05). Males scored significantly higher than females in hand grip, push-ups, and sit-ups, were faster over the 201 m and 2.4 km runs, and had a higher V˙O2max (p ≤ 0.001-0.024). There were no significant differences in performance tests across the age groups for either males or females. To better tolerate the rigors of physical training, female CAs should attempt to improve their fitness prior to academy as they often need to complete the same tasks as the males. Age did not appear to influence the physical characteristics of CAs, although all CAs should attempt to develop the fitness qualities needed for their occupation.

Specialized Laboratory Information Systems.

PubMed

Dangott, Bryan

2015-06-01

Some laboratories or laboratory sections have unique needs that traditional anatomic and clinical pathology systems may not address. A specialized laboratory information system (LIS), which is designed to perform a limited number of functions, may perform well in areas where a traditional LIS falls short. Opportunities for specialized LISs continue to evolve with the introduction of new testing methodologies. These systems may take many forms, including stand-alone architecture, a module integrated with an existing LIS, a separate vendor-supplied module, and customized software. This article addresses the concepts underlying specialized LISs, their characteristics, and in what settings they are found. Copyright © 2015 Elsevier Inc. All rights reserved.

Specialized Laboratory Information Systems.

PubMed

Dangott, Bryan

2016-03-01

Some laboratories or laboratory sections have unique needs that traditional anatomic and clinical pathology systems may not address. A specialized laboratory information system (LIS), which is designed to perform a limited number of functions, may perform well in areas where a traditional LIS falls short. Opportunities for specialized LISs continue to evolve with the introduction of new testing methodologies. These systems may take many forms, including stand-alone architecture, a module integrated with an existing LIS, a separate vendor-supplied module, and customized software. This article addresses the concepts underlying specialized LISs, their characteristics, and in what settings they are found. Copyright © 2016 Elsevier Inc. All rights reserved.

Grindability measurements on low-rank fuels. [Prediction of large pulverizer performance from small scale test equipment

DOE Office of Scientific and Technical Information (OSTI.GOV)

Peipho, R.R.; Dougan, D.R.

1981-01-01

Experience has shown that the grinding characteristics of low rank coals are best determined by testing them in a pulverizer. Test results from a small MPS-32 Babcock and Wilcox pulverizer to predict large, full-scale pulverizer performance are presented. The MPS-32 apparatus, test procedure and evaluation of test results is described. The test data show that the Hardgrove apparatus and the ASTM test method must be used with great caution when considering low-rank fuels. The MPS-32 meets the needs for real-machine simulation but with some disadvantages. A smaller pulverizer is desirable. 1 ref.

A configuration development strategy for the NASP

NASA Astrophysics Data System (ADS)

Snyder, Curtis D.; Pinckney, S. Z.

Characteristics of airframe-integrated scramjet (AIS) aerospacecraft are studied using elementary and a recently developed AIS analysis code. Of principal interest is the definition of the AIS and what concepts offer the most potential. One of the concepts is selected for a limited optimization study aimed at defining the relationship of exhaust area to performance potential. The study shows that, if the AIS vehicle is to be fully constrained within the 'optimum' flowpath envelope, large values of exhaust-area-to-capture-area ratio are desired. A benefit of this choice is that performance at the very highest airbreather speeds is improved and, thus, may delay the need to switch to rocket power.

Exercise physiology and nutritional perspectives of elite soccer refereeing.

PubMed

Schenk, K; Bizzini, M; Gatterer, H

2018-03-01

Referees are an integral part of soccer, and their performance is fundamental for regular match flow, irrespective of the competition level or age classes. So far, scientific interest was mainly limited to aspects of exercise physiology and match performance of soccer referees, whereas recommendations for nutrition were adopted from active professional soccer. In contrast to elite soccer players, most referees are non-professional and engaged in different occupations. Furthermore, elite referees and soccer players differ in regard to age, body composition, aerobic capacity, and training load. Thus, referees' caloric needs and recommended daily carbohydrate intake may generally be lower compared to active soccer players, with higher intakes limited to periods of increased training load and match days or for referees engaged in physical demanding occupations. With respect to fluid intake, pre-match and in-match hydration strategies generally valid in sports are recommended also for referees to avoid cognitive and physical performance loss, especially when officiating in extreme climates and altitude. In contrast to elite soccer, professional assistance concerning nutrition and training is rarely available for national elite referees of most countries. Therefore, special attention on education about adequate nutrition and fluid intake, about the dietary prevention of deficiencies (iron in female referees, vitamin D irrespective of sex and age), and basic precautions for travels abroad is warranted. In conclusion, the simple adoption of nutritional considerations from active soccer for referees may not be appropriate. Recommendations should respect gender differences, population-specific physical characteristics, and demands just as well as individual characteristics and special needs. © 2017 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Agribusiness and Natural Resources Education in Michigan: Manpower Needs, Competencies Needed, School Program Characteristics. A Final Report.

ERIC Educational Resources Information Center

Thuemmel, William L.; And Others

A study was conducted to assess the agricultural manpower needs in Michigan in terms of present jobs available and jobs projected over the next five years, to identify and validate competencies needed for agricultural entry upon graduation from high school, and to determine the degree of congruency and discrepancy between the characteristics of…

U. S. research safety vehicle (RSV) phase I program. Volume III. RSV characteristics and performance specifications. Final report, Jan 1974--Apr 1975

DOE Office of Scientific and Technical Information (OSTI.GOV)

Andon, J.; Dodson, E.; Khadilkar, A.

1975-06-01

Current passenger car usage patterns and factors influencing usage are analyzed and projections of usage patterns in the mid-1980's are made. Current available data on six categories of vehicle accidents are analyzed and projections made of national accident patterns in the mid-80's; the effect of potential reductions in these projections as a result of safety programs and other factors related to driving safety are estimated. Based on the usage and accident projections, the characteristics of an RSV (weighing under 3,000 lbs C.W.) for operation in the mid-1980 traffic environment are described. A recommended set of specifications for the RSV aremore » developed considering the potential safety payoff accruing to an increased level of safety performance, the need for energy conservation, availability of material resources, and changes in vehicle mix. (An executive summary of this report is presented in Volume I).« less

Speech and pause characteristics in multiple sclerosis: A preliminary study of speakers with high and low neuropsychological test performance

PubMed Central

FEENAUGHTY, LYNDA; TJADEN, KRIS; BENEDICT, RALPH H.B.; WEINSTOCK-GUTTMAN, BIANCA

2017-01-01

This preliminary study investigated how cognitive-linguistic status in multiple sclerosis (MS) is reflected in two speech tasks (i.e. oral reading, narrative) that differ in cognitive-linguistic demand. Twenty individuals with MS were selected to comprise High and Low performance groups based on clinical tests of executive function and information processing speed and efficiency. Ten healthy controls were included for comparison. Speech samples were audio-recorded and measures of global speech timing were obtained. Results indicated predicted differences in global speech timing (i.e. speech rate and pause characteristics) for speech tasks differing in cognitive-linguistic demand, but the magnitude of these task-related differences was similar for all speaker groups. Findings suggest that assumptions concerning the cognitive-linguistic demands of reading aloud as compared to spontaneous speech may need to be re-considered for individuals with cognitive impairment. Qualitative trends suggest that additional studies investigating the association between cognitive-linguistic and speech motor variables in MS are warranted. PMID:23294227

The Parametric Study and Fine-Tuning of Bow-Tie Slot Antenna with Loaded Stub

PubMed Central

2017-01-01

A printed Bow-Tie slot antenna with loaded stub is proposed and the effects of changing the dimensions of the slot area, the stub and load sizes are considered in this paper. These parameters have a considerable effect on the antenna characteristics as well as its performance. An in-depth parametric study of these dimensions is presented. This paper proposes the necessary conditions for initial approximation of dimensions needed to design this antenna. In order to achieve the desired performance of the antenna fine tuning of all sizes of these parameters is required. The parametric studies used in this paper provide proper trends for initiation and tuning the design. A prototype of the antenna for 1.7GHz to 2.6GHz band is fabricated. Measurements conducted verify that the designed antenna has wideband characteristics with 50% bandwidth around the center frequency of 2.1GHz. Conducted measurements for reflection coefficient (S11) and radiation pattern also validate our simulation results. PMID:28114354

The Parametric Study and Fine-Tuning of Bow-Tie Slot Antenna with Loaded Stub.

PubMed

Shafiei, M M; Moghavvemi, Mahmoud; Wan Mahadi, Wan Nor Liza

2017-01-01

A printed Bow-Tie slot antenna with loaded stub is proposed and the effects of changing the dimensions of the slot area, the stub and load sizes are considered in this paper. These parameters have a considerable effect on the antenna characteristics as well as its performance. An in-depth parametric study of these dimensions is presented. This paper proposes the necessary conditions for initial approximation of dimensions needed to design this antenna. In order to achieve the desired performance of the antenna fine tuning of all sizes of these parameters is required. The parametric studies used in this paper provide proper trends for initiation and tuning the design. A prototype of the antenna for 1.7GHz to 2.6GHz band is fabricated. Measurements conducted verify that the designed antenna has wideband characteristics with 50% bandwidth around the center frequency of 2.1GHz. Conducted measurements for reflection coefficient (S11) and radiation pattern also validate our simulation results.

Introduction and Highlights of the Workshop

NASA Technical Reports Server (NTRS)

Noor, Ahmed K.; Venneri, Samuel L.

1997-01-01

Four generations of CAD/CAM systems can be identified, corresponding to changes in both modeling functionality and software architecture. The systems evolved from 2D and wireframes to solid modeling, to parametric/variational modelers to the current simulation-embedded systems. Recent developments have enabled design engineers to perform many of the complex analysis tasks, typically performed by analysis experts. Some of the characteristics of the current and emerging CAD/CAM/CAE systems are described in subsequent presentations. The focus of the workshop is on the potential of CAD/CAM/CAE systems for use in simulating the entire mission and life-cycle of future aerospace systems, and the needed development to realize this potential. First, the major features of the emerging computing, communication and networking environment are outlined; second, the characteristics and design drivers of future aerospace systems are identified; third, the concept of intelligent synthesis environment being planned by NASA, the UVA ACT Center and JPL is presented; and fourth, the objectives and format of the workshop are outlined.

Flow speed has little impact on propulsive characteristics of oscillating foils

NASA Astrophysics Data System (ADS)

Van Buren, T.; Floryan, D.; Wei, N.; Smits, A. J.

2018-01-01

Experiments are reported on the performance of a pitching and heaving two-dimensional foil in a water channel in either continuous or intermittent motion. We find that the thrust and power are independent of the mean free-stream velocity for twofold changes in the mean velocity (fourfold in the dynamic pressure) and for oscillations in the velocity up to 38% of the mean, where the oscillations are intended to mimic those of freely swimming motions where the thrust varies during the flapping cycle. We demonstrate that the correct velocity scale is not the flow velocity but the mean velocity of the trailing edge. We also find little or no impact of streamwise velocity change on the wake characteristics such as vortex organization, vortex strength, and time-averaged velocity profile development—the wake is both qualitatively and quantitatively unchanged. Our results suggest that constant velocity studies can be used to make robust conclusions about swimming performance without a need to explore the free-swimming condition.

Assessment of Institutional Capacities of Flood Management Institution in Pakistan

NASA Astrophysics Data System (ADS)

Khan, Noor M.

2009-03-01

Pakistan is frequently devastated by floods. The flood impacts can be reduced if the flood management institutional capacities are improved. This paper reviews and assesses the capacities of flood management institution in Pakistan. Citing a number of case studies about the flood management practices in Pakistan, the study estimates the weaknesses and strengths of the institution with respect to various phases of flood management, namely, mitigation, preparedness, response, and rehabilitation and also with respect to various characteristics of institutions, namely, deliberation, coordination, implementation, and evaluation, using an improved capacity assessment framework. It has been found that the performance of the mitigation and rehabilitation phases is not satisfactory and that of preparedness and response is satisfactory. It is concluded that the functions of deliberation need to be improved while the other three characteristics of institution namely, coordination, implementation, and evaluation are performing well. The study will help the policy makers to concentrate on the identified weak capacities.

Small launchers (current and future projects in the world)

NASA Astrophysics Data System (ADS)

Naumann, W. G.

1993-01-01

Small satellites need launching services using small launchers capable of injecting 100 to 1000 kg into a polar orbit at an altitude of 1000 km. Operational small launchers are reviewed as well as developing and planned ones. Launcher characteristics, constraints, performance, and status are detailed. Few technical problems are encountered, as most launcher projects call for existing components and well known technologies. Most of the difficulties have come from launch site availability and from financial considerations.

Small craft ID criteria (N50/V50) for short wave infrared sensors in maritime security

NASA Astrophysics Data System (ADS)

Krapels, Keith; Driggers, Ronald G.; Larson, Paul; Garcia, Jose; Walden, Barry; Agheera, Sameer; Deaver, Dawne; Hixson, Jonathan; Boettcher, Evelyn

2008-04-01

The need for Anti-Terrorism and Force Protection (AT/FP), for both shore and sea platform protection, has resulted in a need for imager design and evaluation tools which can predict field performance against maritime asymmetric threats. In the design of tactical imaging systems for target acquisition, a discrimination criterion is required for successful sensor realization. It characterizes the difficulty of the task being performed by the observer and varies for different target sets. This criterion is used in both assessment of existing infrared sensor and in the design of new conceptual sensors. In this experiment, we collected 8 small craft signatures (military and civilian) in the short wave infrared (SWIR) band during the day. These signatures were processed to determine the targets' characteristic dimension and contrast. They were also processed to bandlimit the signature's spatial information content (simulating longer range) and a perception experiment was performed to determine the task difficulty (N50 and V50). The results are presented in this paper and can be used for maritime security imaging sensor design and evaluation.

The Typical General Aviation Aircraft

NASA Technical Reports Server (NTRS)

Turnbull, Andrew

1999-01-01

The reliability of General Aviation aircraft is unknown. In order to "assist the development of future GA reliability and safety requirements", a reliability study needs to be performed. Before any studies on General Aviation aircraft reliability begins, a definition of a typical aircraft that encompasses most of the general aviation characteristics needs to be defined. In this report, not only is the typical general aviation aircraft defined for the purpose of the follow-on reliability study, but it is also separated, or "sifted" into several different categories where individual analysis can be performed on the reasonably independent systems. In this study, the typical General Aviation aircraft is a four-place, single engine piston, all aluminum fixed-wing certified aircraft with a fixed tricycle landing gear and a cable operated flight control system. The system breakdown of a GA aircraft "sifts" the aircraft systems and components into five categories: Powerplant, Airframe, Aircraft Control Systems, Cockpit Instrumentation Systems, and the Electrical Systems. This breakdown was performed along the lines of a failure of the system. Any component that caused a system to fail was considered a part of that system.

The Needs of Families: Results of a Statewide Survey in Massachusetts.

ERIC Educational Resources Information Center

Agosta, John M.; And Others

The report presents findings from a survey of 243 caregiving families in Massachusetts which explored family needs and characteristics, as well as those of their developmentally disabled family members. Survey questions focused on family information, characteristics of the disabled family member, information on family needs, care-related costs…

The Effects of Needs, Organizational Factors and Teacher's Characteristics on Job Satisfaction in Kindergarten Teachers.

ERIC Educational Resources Information Center

Avi-Itzhak, Tamara E.

The purpose of this study is to: (1) identify and assess perceived professional needs of kindergarten teachers; (2) identify perceived professional needs, organizational factors and teachers' characteristics which significantly discriminate between "satisfied teachers" vs. "dissatisfied teachers"; and (3) assess their relative…

Developing a Teacher Characteristics Scale

ERIC Educational Resources Information Center

Yaratan, Hüseyin; Muezzin, Emre

2016-01-01

It is a known fact that every profession needs to be developed during its practice. To be able to acquire this we need to know the characteristics of teachers related to their professional development. For this purpose this study tries to develop a scale to measure teacher characteristics which would help in designing in-service training programs…

Predisposing characteristics, enabling resources and need as predictors of utilization and clinical outcomes for veterans receiving mental health services.

PubMed

Fasoli, DiJon R; Glickman, Mark E; Eisen, Susan V

2010-04-01

Though demand for mental health services (MHS) among US veterans is increasing, MHS utilization per veteran is decreasing. With health and social service needs competing for limited resources, it is important to understand the association between patient factors, MHS utilization, and clinical outcomes. We use a framework based on Andersen's behavioral model of health service utilization to examine predisposing characteristics, enabling resources, and clinical need as predictors of MHS utilization and clinical outcomes. This was a prospective observational study of veterans receiving inpatient or outpatient MHS through Veterans Administration programs. Clinician ratings (Global Assessment of Functioning [GAF]) and self-report assessments (Behavior and Symptom Identification Scale-24) were completed for 421 veterans at enrollment and 3 months later. Linear and logistic regression analyses were conducted to examine: (1) predisposing characteristics, enabling resources, and need as predictors of MHS inpatient, residential, and outpatient utilization and (2) the association between individual characteristics, utilization, and clinical outcomes. Being older, female, having greater clinical need, lack of enabling resources (employment, stable housing, and social support), and easy access to treatment significantly predicted greater MHS utilization at 3-month follow-up. Less clinical need and no inpatient psychiatric hospitalization predicted better GAF and Behavior and Symptom Identification Scale-24 scores. White race and residential treatment also predicted better GAF scores. Neither enabling resources, nor number of outpatient mental health visits predicted clinical outcomes. This application of Andersen's behavioral model of health service utilization confirmed associations between some predisposing characteristics, need, and enabling resources on MHS utilization but only predisposing characteristics, need, and utilization were associated with clinical outcomes.

Diagnoses Treated in Ambulatory Care Among Homeless-Experienced Veterans: Does Supported Housing Matter?

PubMed

Gabrielian, Sonya; Yuan, Anita H; Andersen, Ronald M; Gelberg, Lillian

2016-10-01

Little is known about how permanent supported housing influences ambulatory care received by homeless persons. To fill this gap, we compared diagnoses treated in VA Greater Los Angeles (VAGLA) ambulatory care between Veterans who are formerly homeless-now housed/case managed through VA Supported Housing ("VASH Veterans")-and currently homeless. We performed secondary database analyses of homeless-experienced Veterans (n = 3631) with VAGLA ambulatory care use from October 1, 2010 to September 30, 2011. We compared diagnoses treated-adjusting for demographics and need characteristics in regression analyses-between VASH Veterans (n = 1904) and currently homeless Veterans (n = 1727). On average, considering 26 studied diagnoses, VASH (vs currently homeless) Veterans received care for more (P < .05) diagnoses (mean = 2.9/1.7). Adjusting for demographics and need characteristics, VASH Veterans were more likely (P < .05) than currently homeless Veterans to receive treatment for diagnoses across categories: chronic physical illness, acute physical illness, mental illness, and substance use disorders. Specifically, VASH Veterans had 2.5, 1.7, 2.1, and 1.8 times greater odds of receiving treatment for at least 2 condition in these categories, respectively. Among participants treated for chronic illnesses, adjusting for predisposing and need characteristics, VASH (vs currently homeless) Veterans were 9%, 8%, and 11% more likely to have 2 or more visits for chronic physical illnesses, mental illnesses, and substance use disorder, respectively. Among homeless-experienced Veterans, permanent supported housing may reduce disparities in the treatment of diagnoses commonly seen in ambulatory care. © The Author(s) 2016.

[Mothers' difficulty in childrearing classified in terms of their children's behavioral characteristics].

PubMed

Sakata, Sachi; Naruse, Takashi; Taguchi, Atsuko; Murashima, Sachiyo

2014-01-01

Mothers who experience difficulty in childrearing are becoming increasingly more prevalent in Japan. This study described and classified mothers' childrearing difficulty in terms of their children's behavioral characteristics and related factors. Self-administered questionnaires were distributed to 818 mothers at their children's 3-year-old health checkup in eight suburban cities in Japan. The questionnaire consisted of items assessing the mother's experience of difficulty in childrearing for the child undergoing the checkup. The subjects were classified into four groups according to their children's behavioral characteristics: "low needs," "internalizing behavior," "externalizing behavior," and "comorbid internalizing-externalizing behavior." Multiple regression analysis was performed to examine the relationships between mothers' difficulty in childrearing and related factors. A total of 775 respondents were divided as follows: 332 mothers had children with low needs, 104 had those with internalizing behavior, 230 had those with externalizing behavior, and 109 had those with comorbid internalizing-externalizing behavior. Mothers in the low needs group showed less childrearing difficulty than did mothers in the other groups. Childrearing difficulty increased by group in the following order: internalizing, externalizing, and comorbid internalizing-externalizing. In all four groups, mothers with low self-efficacy and less appraisal support from their family encountered greater childrearing difficulty. In the low needs group, experiencing childrearing difficulty with another child was related experiencing childrearing difficulty with the child undergoing the checkup. In the internalizing behavior group, mothers who had experienced greater difficulty in childrearing were more likely to be housewives and of younger age, and were more likely to have had boys as the child undergoing the checkup. In the externalizing behavior group, mothers with more difficulty in childrearing were more likely to be younger and less healthy, have less appraisal support from their friends, and live in apartments. In the comorbid internalizing-externalizing group, if the mothers were housewives, they were more likely to have difficulty in caring for their other children, receive less appraisal support from their friends, and experience more difficulty in childrearing. The results showed that mothers' difficulty in childrearing and the factors related to this difficulty differed according to their children's behavioral characteristics. Public health nurses could provide more effective care and support to mothers by considering children's behavioral characteristics.

A meta-analytic examination of the goal orientation nomological net.

PubMed

Payne, Stephanie C; Youngcourt, Satoris S; Beaubien, J Matthew

2007-01-01

The authors present an empirical review of the literature concerning trait and state goal orientation (GO). Three dimensions of GO were examined: learning, prove performance, and avoid performance along with presumed antecedents and proximal and distal consequences of these dimensions. Antecedent variables included cognitive ability, implicit theory of intelligence, need for achievement, self-esteem, general self-efficacy, and the Big Five personality characteristics. Proximal consequences included state GO, task-specific self-efficacy, self-set goal level, learning strategies, feedback seeking, and state anxiety. Distal consequences included learning, academic performance, task performance, and job performance. Generally speaking, learning GO was positively correlated, avoid performance GO was negatively correlated, and prove performance GO was uncorrelated with these variables. Consistent with theory, state GO tended to have stronger relationships with the distal consequences than did trait GO. Finally, using a meta-correlation matrix, the authors found that trait GO predicted job performance above and beyond cognitive ability and personality. These results demonstrate the value of GO to organizational researchers. 2007 APA, all rights reserved

Strategic planning processes and hospital financial performance.

PubMed

Kaissi, Amer A; Begun, James W

2008-01-01

Many common management practices in healthcare organizations, including the practice of strategic planning, have not been subject to widespread assessment through empirical research. If management practice is to be evidence-based, evaluations of such common practices need to be undertaken. The purpose of this research is to provide evidence on the extent of strategic planning practices and the association between hospital strategic planning processes and financial performance. In 2006, we surveyed a sample of 138 chief executive officers (CEOs) of hospitals in the state of Texas about strategic planning in their organizations and collected financial information on the hospitals for 2003. Among the sample hospitals, 87 percent reported having a strategic plan, and most reported that they followed a variety of common practices recommended for strategic planning-having a comprehensive plan, involving physicians, involving the board, and implementing the plan. About one-half of the hospitals assigned responsibility for the plan to the CEO. We tested the association between these planning characteristics in 2006 and two measures of financial performance for 2003. Three dimensions of the strategic planning process--having a strategic plan, assigning the CEO responsibility for the plan, and involving the board--are positively associated with earlier financial performance. Further longitudinal studies are needed to evaluate the cause-and-effect relationship between planning and performance.

Studies of pointing, acquisition, and tracking of agile optical wireless transceivers for free-space optical communication networks

NASA Astrophysics Data System (ADS)

Ho, Tzung-Hsien; Trisno, Sugianto; Smolyaninov, Igor I.; Milner, Stuart D.; Davis, Christopher C.

2004-02-01

Free space, dynamic, optical wireless communications will require topology control for optimization of network performance. Such networks may need to be configured for bi- or multiple-connectedness, reliability and quality-of-service. Topology control involves the introduction of new links and/or nodes into the network to achieve such performance objectives through autonomous reconfiguration as well as precise pointing, acquisition, tracking, and steering of laser beams. Reconfiguration may be required because of link degradation resulting from obscuration or node loss. As a result, the optical transceivers may need to be re-directed to new or existing nodes within the network and tracked on moving nodes. The redirection of transceivers may require operation over a whole sphere, so that small-angle beam steering techniques cannot be applied. In this context, we are studying the performance of optical wireless links using lightweight, bi-static transceivers mounted on high-performance stepping motor driven stages. These motors provide an angular resolution of 0.00072 degree at up to 80,000 steps per second. This paper focuses on the performance characteristics of these agile transceivers for pointing, acquisition, and tracking (PAT), including the influence of acceleration/deceleration time, motor angular speed, and angular re-adjustment, on latency and packet loss in small free space optical (FSO) wireless test networks.

Multi-threaded Sparse Matrix Sparse Matrix Multiplication for Many-Core and GPU Architectures.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Deveci, Mehmet; Trott, Christian Robert; Rajamanickam, Sivasankaran

Sparse Matrix-Matrix multiplication is a key kernel that has applications in several domains such as scientific computing and graph analysis. Several algorithms have been studied in the past for this foundational kernel. In this paper, we develop parallel algorithms for sparse matrix- matrix multiplication with a focus on performance portability across different high performance computing architectures. The performance of these algorithms depend on the data structures used in them. We compare different types of accumulators in these algorithms and demonstrate the performance difference between these data structures. Furthermore, we develop a meta-algorithm, kkSpGEMM, to choose the right algorithm and datamore » structure based on the characteristics of the problem. We show performance comparisons on three architectures and demonstrate the need for the community to develop two phase sparse matrix-matrix multiplication implementations for efficient reuse of the data structures involved.« less

Multi-threaded Sparse Matrix-Matrix Multiplication for Many-Core and GPU Architectures.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Deveci, Mehmet; Rajamanickam, Sivasankaran; Trott, Christian Robert

Sparse Matrix-Matrix multiplication is a key kernel that has applications in several domains such as scienti c computing and graph analysis. Several algorithms have been studied in the past for this foundational kernel. In this paper, we develop parallel algorithms for sparse matrix-matrix multiplication with a focus on performance portability across different high performance computing architectures. The performance of these algorithms depend on the data structures used in them. We compare different types of accumulators in these algorithms and demonstrate the performance difference between these data structures. Furthermore, we develop a meta-algorithm, kkSpGEMM, to choose the right algorithm and datamore » structure based on the characteristics of the problem. We show performance comparisons on three architectures and demonstrate the need for the community to develop two phase sparse matrix-matrix multiplication implementations for efficient reuse of the data structures involved.« less

The development and testing of a skin tear risk assessment tool.

PubMed

Newall, Nelly; Lewin, Gill F; Bulsara, Max K; Carville, Keryln J; Leslie, Gavin D; Roberts, Pam A

2017-02-01

The aim of the present study is to develop a reliable and valid skin tear risk assessment tool. The six characteristics identified in a previous case control study as constituting the best risk model for skin tear development were used to construct a risk assessment tool. The ability of the tool to predict skin tear development was then tested in a prospective study. Between August 2012 and September 2013, 1466 tertiary hospital patients were assessed at admission and followed up for 10 days to see if they developed a skin tear. The predictive validity of the tool was assessed using receiver operating characteristic (ROC) analysis. When the tool was found not to have performed as well as hoped, secondary analyses were performed to determine whether a potentially better performing risk model could be identified. The tool was found to have high sensitivity but low specificity and therefore have inadequate predictive validity. Secondary analysis of the combined data from this and the previous case control study identified an alternative better performing risk model. The tool developed and tested in this study was found to have inadequate predictive validity. The predictive validity of an alternative, more parsimonious model now needs to be tested. © 2015 Medicalhelplines.com Inc and John Wiley & Sons Ltd.

Development and evaluation of a new alcohol-based surgical hand scrub formulation with persistent antimicrobial characteristics and brushless application.

PubMed

Hobson, D W; Woller, W; Anderson, L; Guthery, E

1998-10-01

Since the introduction in the 1970s of surgical hand scrub formulations that contain 4% chlorhexidine gluconate (CHG), new surgical scrub formulations that have improved efficacy, persistence, or significantly improved use characteristics have not been forthcoming. In addition, the manufacturer's labeling for popular hand scrub products generally requires scrub times in excess of 6 minutes, whereas current practical needs call for products with substantially shorter scrub times. A new alcohol-based surgical scrub formulation, which has ingredients that provide emollient, surfactant, and antimicrobial persistence characteristics to complement the rapid and broad-spectrum antiseptic qualities of alcohol, has been developed in an effort to address these current practical needs. The relative efficacy of a new alcohol-based surgical scrub formulation that contains ingredients that provide surfactant and antimicrobial persistence characteristics was compared with that of commercial 4% CHG and 7.5% povidone iodine (PVPI) formulations with use of human subjects. Hand antimicrobial count sampling was performed by using standardized "glove juice" methodology. The efficacy and persistence results of the new formulation showed statistically significant improvement over both CHG and PVPI at a substantially lessened scrub time (3 minutes). In addition, use of the new formulation without a scrub brush produced results statistically similar to 3-minute applications with either a brush or a sponge. The new alcohol-based formulation demonstrates promise as a new surgical hand scrub formulation with antimicrobial and use characteristics that are significantly improved over current CHG and PVPI formulations. These studies demonstrate the suitability of this formulation for use as a surgical hand scrub and for brushless application.

Improving Health Care Management in Primary Care for Homeless People: A Literature Review.

PubMed

Jego, Maeva; Abcaya, Julien; Ștefan, Diana-Elena; Calvet-Montredon, Céline; Gentile, Stéphanie

2018-02-10

Homeless people have poorer health status than the general population. They need complex care management, because of associated medical troubles (somatic and psychiatric) and social difficulties. We aimed to describe the main characteristics of the primary care programs that take care of homeless people, and to identify which could be most relevant. We performed a literature review that included articles which described and evaluated primary care programs for homeless people. Most of the programs presented a team-based approach, multidisciplinary and/or integrated care. They often proposed co-located services between somatic health services, mental health services and social support services. They also tried to answer to the specific needs of homeless people. Some characteristics of these programs were associated with significant positive outcomes: tailored primary care organizations, clinic orientation, multidisciplinary team-based models which included primary care physicians and clinic nurses, integration of social support, and engagement in the community's health. Primary health care programs that aimed at taking care of the homeless people should emphasize a multidisciplinary approach and should consider an integrated (mental, somatic and social) care model.

The Challenges Facing Science Data Archiving on Current Mass Storage Systems

NASA Technical Reports Server (NTRS)

Peavey, Bernard; Behnke, Jeanne (Editor)

1996-01-01

This paper discusses the desired characteristics of a tape-based petabyte science data archive and retrieval system required to store and distribute several terabytes (TB) of data per day over an extended period of time, probably more than 115 years, in support of programs such as the Earth Observing System Data and Information System (EOSDIS). These characteristics take into consideration not only cost effective and affordable storage capacity, but also rapid access to selected files, and reading rates that are needed to satisfy thousands of retrieval transactions per day. It seems that where rapid random access to files is not crucial, the tape medium, magnetic or optical, continues to offer cost effective data storage and retrieval solutions, and is likely to do so for many years to come. However, in environments like EOS these tape based archive solutions provide less than full user satisfaction. Therefore, the objective of this paper is to describe the performance and operational enhancements that need to be made to the current tape based archival systems in order to achieve greater acceptance by the EOS and similar user communities.

Prevalence, incidence and associated factors of pressure ulcers in home palliative care patients: A retrospective chart review.

PubMed

Artico, Marco; Dante, Angelo; D'Angelo, Daniela; Lamarca, Luciano; Mastroianni, Chiara; Petitti, Tommasangelo; Piredda, Michela; De Marinis, Maria Grazia

2018-01-01

Terminally ill patients are at high risk of pressure ulcers, which have a negative impact on quality of life. Data about pressure ulcers' prevalence, incidence and associated factors are largely insufficient. To document the point prevalence at admission and the cumulative incidence of pressure ulcers in terminally ill patients admitted to an Italian home palliative care unit, and to analyse the patients' and caregivers' characteristics associated with their occurrence. Retrospective chart review. Patients ( n = 574) with a life expectancy ⩽6 months admitted to a palliative home care service were included in this study. The prevalence and incidence rates were 13.1% and 13.0%, respectively. The logistic regression models showed body mass index ( p < 0.001), Braden score at risk ( p < 0.001), Karnofsky Performance Scale index <30 ( p < 0.001), patients' female gender, patients' age >70 and >1 caregiver at home as the dichotomous variables predictors of presenting with a pressure ulcer at time of admission and during home palliative care. The notable pressure ulcers' incidence and prevalence rates suggest the need to include this issue among the main outcomes to pursue during home palliative care. The accuracy of body mass index, Braden Scale and Karnofsky Performance Scale in predicting the pressure ulcers risk is confirmed. Therefore, they appear as essential tools, in combination with nurses' clinical judgment, for a structured approach to pressure ulcers prevention. Further research is needed to explore the home caregivers' characteristics and attitudes associated with the occurrence of pressure ulcers and the relations between their strategies for pressure ulcer prevention and gender-related patient's needs.

Removal of Phenolic Compounds from Water Using Sewage Sludge-Based Activated Carbon Adsorption: A Review.

PubMed

Mu'azu, Nuhu Dalhat; Jarrah, Nabeel; Zubair, Mukarram; Alagha, Omar

2017-09-21

Due to their industrial relevance, phenolic compounds (PC) are amongst the most common organic pollutants found in many industrial wastewater effluents. The potential detrimental health and environmental impacts of PC necessitate their removal from wastewater to meet regulatory discharge standards to ensure meeting sustainable development goals. In recent decades, one of the promising, cost-effective and environmentally benign techniques for removal of PC from water streams has been adsorption onto sewage sludge (SS)-based activated carbon (SBAC). This is attributed to the excellent adsorptive characteristics of SBAC and also because the approach serves as a strategy for sustainable management of huge quantities of different types of SS that are in continual production globally. This paper reviews conversion of SS into activated carbons and their utilization for the removal of PC from water streams. Wide ranges of topics which include SBAC production processes, physicochemical characteristics of SBAC, factors affecting PC adsorption onto SBAC and their uptake mechanisms as well as the regeneration potential of spent SBAC are covered. Although chemical activation techniques produce better SBAC, yet more research work is needed to harness advances in material science to improve the functional groups and textural properties of SBAC as well as the low performance of physical activation methods. Studies focusing on PC adsorptive performance on SBAC using continuous mode (that are more relevant for industrial applications) in both single and multi-pollutant aqueous systems to cover wide range of PC are needed. Also, the potentials of different techniques for regeneration of spent SBAC used for adsorption of PC need to be assessed in relation to overall economic evaluation within realm of environmental sustainability using life cycle assessment.

Removal of Phenolic Compounds from Water Using Sewage Sludge-Based Activated Carbon Adsorption: A Review

PubMed Central

Jarrah, Nabeel; Zubair, Mukarram; Alagha, Omar

2017-01-01

Due to their industrial relevance, phenolic compounds (PC) are amongst the most common organic pollutants found in many industrial wastewater effluents. The potential detrimental health and environmental impacts of PC necessitate their removal from wastewater to meet regulatory discharge standards to ensure meeting sustainable development goals. In recent decades, one of the promising, cost-effective and environmentally benign techniques for removal of PC from water streams has been adsorption onto sewage sludge (SS)-based activated carbon (SBAC). This is attributed to the excellent adsorptive characteristics of SBAC and also because the approach serves as a strategy for sustainable management of huge quantities of different types of SS that are in continual production globally. This paper reviews conversion of SS into activated carbons and their utilization for the removal of PC from water streams. Wide ranges of topics which include SBAC production processes, physicochemical characteristics of SBAC, factors affecting PC adsorption onto SBAC and their uptake mechanisms as well as the regeneration potential of spent SBAC are covered. Although chemical activation techniques produce better SBAC, yet more research work is needed to harness advances in material science to improve the functional groups and textural properties of SBAC as well as the low performance of physical activation methods. Studies focusing on PC adsorptive performance on SBAC using continuous mode (that are more relevant for industrial applications) in both single and multi-pollutant aqueous systems to cover wide range of PC are needed. Also, the potentials of different techniques for regeneration of spent SBAC used for adsorption of PC need to be assessed in relation to overall economic evaluation within realm of environmental sustainability using life cycle assessment. PMID:28934127

How do nurse consultant job characteristics impact on job satisfaction? An Australian quantitative study.

PubMed

Giles, Michelle; Parker, Vicki; Mitchell, Rebecca; Conway, Jane

2017-01-01

There is a direct link between job satisfaction, nurses' job performance and improved patient outcomes. Understanding what job characteristics influence job satisfaction is vital if health organizations are to optimize individual employee satisfaction and performance. This is particularly necessary in the Nurse Consultant role, which is a multifaceted role that has evolved to meet the dynamic and changing needs of health services. This study aims to examine how job characteristics influence Nurse Consultant job satisfaction and identify differences across metropolitan and rural contexts. This paper presents quantitative findings that are part of a larger prospective cross sectional mixed method study. An online survey consisting of a variety of job characteristic factors was administered to all NCs working in a large Local Health District in New South Wales, Australia over an 8-week period in 2010. Descriptive analysis identified NC's perceptions of job satisfaction and job characteristics in their current role and factor and regression analysis identified relationships between these factors. Job satisfaction was identified as high (mean 4.3) and is strongly correlated with job autonomy, role clarity, role conflict and job support. A high level of role clarity has a moderating effect on the relationship between job autonomy and job satisfaction. Study findings inform how we prepare nurses for the NC role and how managers engage with and support NCs in their role taking into account context. Understanding the factors that influence job satisfaction and role effectiveness gives managers valuable information to assist in positioning and supporting these roles to maximize effectiveness across integrated and contemporary models of health care delivery.

Palliative sedation for terminally ill cancer patients in a tertiary cancer center in Shanghai, China.

PubMed

Gu, Xiaoli; Cheng, Wenwu; Chen, Menglei; Liu, Minghui; Zhang, Zhe

2015-01-01

There are a number of studies dedicated to characteristics of sedation, but these studies are mostly bound to western country practices. The aim of this study is to describe the characteristics of patients who suffered from cancer and who had been sedated until their death in Shanghai, China. Retrospective medical data of 244 terminally ill cancer patients including 82 sedated patients were collected. Data collected included demographic characteristics, disease-related characteristics and details of the sedation. In sedated cases, patients and/or caregivers gave the consent to start palliative sedation due to unmanageable symptoms. On average, sedation was performed 24.65(±1.78)hours before death. Agitated delirium and dyspnea were the most frequent indications for palliative sedation. There was no significant difference in survival time from admission till death between sedated and non-sedated patients (p > 0.05). Palliative sedation is effective for reducing terminally ill cancer patients' suffering without hastening death. Prospective research is needed to determine the optimal conditions for Chinese patients including indications, decision making process, informed consent, cultural and ethical issues, type of sedation and drugs.

[Predictors of fighting spirit or helplessness/hopelessness in people with cancer].

PubMed

Oh, Pok-Ja; Lee, Yeon-Joo

2008-04-01

This study was done to identify predictors of the fighting spirit or helplessness/hopelessness in the patients' mental adjustment to cancer. Cancer patients' characteristics like performance status, metastasis and duration of diagnosis with demographic factors, spiritual support and social support were used as predictors of a fighting spirit or helplessness/hopelessness. A total of 124 ambulatory cancer patients completed the Mental Adjustment to Cancer (MAC) scale and responded in a structured instrument about their characteristics, spiritual and social support. The results of multiple regression analysis revealed that confidence in the supporter (R(2)=.114, p=.000), duration of cancer diagnosis (R(2)=.041, p=.000) and faith (R(2)=.030, p=.000) were predictive of a fighting spirit (R(2)=.185, p=.000); whereas, education (R(2)=.074, p=.001), performance status (R(2)=.055, p=.000), satisfaction with social support (R(2)=.046, p=.000), and metastasis (R(2)=.037, p=.000) were predictive of helplessness/hopelessness (R(2)=.202, p=.000). Social support, spiritual support and disease related factors like metastasis, performance status, and duration of cancer diagnosis need to be considered in a psychosocial nursing intervention for a fighting spirit or helplessness/hopelessness.

Unmet needs and health-related quality of life in young-onset dementia.

PubMed

Bakker, Christian; de Vugt, Marjolein E; van Vliet, Deliane; Verhey, Frans; Pijnenburg, Yolande A; Vernooij-Dassen, Myrra J F J; Koopmans, Raymond T C M

2014-11-01

Young-onset dementia (YOD) causes specific challenges and issues that are likely to affect health-related quality of life (HRQOL). This study explored patient and caregiver HRQOL and its association with unmet needs in YOD. A cross-sectional design was used to study 215 community-dwelling YOD patients and their primary caregivers. Multiple linear regression analyses were performed to determine the relationship between unmet needs assessed with the Camberwell Assessment of Need for the Elderly scale and patient and caregiver HRQOL, controlling for other variables such as demographic characteristics, patient functional status, neuropsychiatric symptoms, and caregiver sense of competence. Patient HRQOL was not associated with unmet needs. However, we found that the unmet needs of both patient and caregiver were related to several domains of caregiver HRQOL. This study shows that patient and caregiver unmet needs are related to caregiver HRQOL in YOD. However, the relationship between HRQOL and unmet needs is complex. The assessment of unmet needs within the context of HRQOL seems to be an important prerequisite for personalizing care in YOD. Adjusting supportive services to match the individual needs and preferences of these young patients and their caregivers is likely to enhance their quality of life. Copyright © 2014 American Association for Geriatric Psychiatry. Published by Elsevier Inc. All rights reserved.

Epidemiological characteristics and methodological quality of meta-analyses on diabetes mellitus treatment: a systematic review.

PubMed

Wu, Xin Yin; Lam, Victor C K; Yu, Yue Feng; Ho, Robin S T; Feng, Ye; Wong, Charlene H L; Yip, Benjamin H K; Tsoi, Kelvin K F; Wong, Samuel Y S; Chung, Vincent C H

2016-11-01

Well-conducted meta-analyses (MAs) are considered as one of the best sources of clinical evidence for treatment decision. MA with methodological flaws may introduce bias and mislead evidence users. The aim of this study is to investigate the characteristics and methodological quality of MAs on diabetes mellitus (DM) treatments. Systematic review. Cochrane Database of Systematic Review and Database of Abstract of Reviews of Effects were searched for relevant MAs. Assessing methodological quality of systematic reviews (AMSTAR) tool was used to evaluate the methodological quality of included MAs. Logistic regression analysis was used to identify association between characteristics of MA and AMSTAR results. A total of 252 MAs including 4999 primary studies and 13,577,025 patients were included. Over half of the MAs (65.1%) only included type 2 DM patients and 160 MAs (63.5%) focused on pharmacological treatments. About 89.7% MAs performed comprehensive literature search and 89.3% provided characteristics of included studies. Included MAs generally had poor performance on the remaining AMSTAR items, especially in assessing publication bias (39.3%), providing lists of studies (19.0%) and declaring source of support comprehensively (7.5%). Only 62.7% MAs mentioned about harm of interventions. MAs with corresponding author from Asia performed less well in providing MA protocol than those from Europe. Methodological quality of MA on DM treatments was unsatisfactory. There is considerable room for improvement, especially in assessing publication bias, providing lists of studies and declaring source of support comprehensively. Also, there is an urgent need for MA authors to report treatment harm comprehensively. © 2016 European Society of Endocrinology.

The Classroom Environment Questionnaire (CEQ): Development and preliminary structural validity.

PubMed

Lyons, Carissa; Brown, Ted; Bourke-Taylor, Helen

2018-04-16

Occupational therapists offer a unique perspective regarding the contribution of the environment to occupational performance. Therefore, a scale that measures the unique characteristics of the primary school classroom environment where children complete their daily schoolwork occupations is needed. The aim of this study was to develop and psychometrically evaluate a new teacher-report questionnaire that measures a number of environmental characteristics of primary school classrooms. Participants (N = 117) completed the Classroom Environment Questionnaire (CEQ), which utilises a 4-point Likert scale where teachers rate 51 environmental characteristics of their classroom. Teachers also rate the extent to which they believe the physical, social, temporal, institutional and cultural classroom environmental domains contribute to students' schoolwork performance using a 10-point scale. The structural validity of the CEQ was examined using principal component analysis (PCA). Inter-item correlations were examined using Pearson r correlations, while the internal consistency of the CEQ was assessed using Cronbach's alpha. PCA revealed the CEQ to be multidimensional, with 31 items loading onto nine viable factors, representing the unique nature of classroom environments. Based on the PCA results, 20 items were removed from the CEQ. Cronbach's alpha and correlation analysis indicated that most CEQ subsections had acceptable internal consistency (alpha range 0.70-0.82), with four subsections demonstrating a lower level of internal consistency (alpha range 0.55-0.69). Preliminary structural validity and internal consistency analysis findings confirm that the CEQ has potential to be a useful scale for professionals wishing to examine the unique characteristics of primary school classrooms that influence the occupational performance of students. Ongoing analyses will be undertaken to further explore the CEQ's validity and reliability. © 2018 Occupational Therapy Australia.

Numerical solution for the interaction of shock wave with laminar boundary layer in two-dimensional flow on a flat plate. Ph.D. Thesis

NASA Technical Reports Server (NTRS)

Landau, U.

1984-01-01

The finite difference computation method was investigated for solving problems of interaction between a shock wave and a laminar boundary layer, through solution of the complete Navier-Stokes equations. This method provided excellent solutions, was simple to perform and needed a relatively short solution time. A large number of runs for various flow conditions could be carried out from which the interaction characteristics and principal factors that influence interaction could be studied.

Comparison of Two Railgun Power Supply Architectures to Quantify the Energy Dissipated After the Projectile Leaves the Railgun

DTIC Science & Technology

2016-06-01

inch gun on impact [1]. The potential of the EM railgun renders the need to store dangerous explosives associated with the conventional warheads...leaves the gun . The simulation will outline some critical performance characteristics of a buck-boost power supply as compared to a thyristor-based...between the rails and from the projectile position along the length of the gun x [5]: 3 1 2 𔃻 2 2 w o

Current and future technology in radial and axial gas turbines

NASA Technical Reports Server (NTRS)

Rohlik, H. E.

1983-01-01

Design approaches and flow analysis techniques currently employed by aircraft engine manufacturers are assessed. Studies were performed to define the characteristics of aircraft and engines for civil missions of the 1990's and beyond. These studies, coupled with experience in recent years, identified the critical technologies needed to meet long range goals in fuel economy and other operating costs. Study results, recent and current research and development programs, and an estimate of future design and analytic capabilities are discussed.

Analysis of the Characteristics of a Rotary Stepper Micromotor

NASA Astrophysics Data System (ADS)

Sone, Junji; Mizuma, Toshinari; Masunaga, Masakazu; Mochizuki, Shunsuke; Sarajic, Edin; Yamahata, Christophe; Fujita, Hiroyuki

A 3-phase electrostatic stepper micromotor was developed. To improve its performance for actual use, we have conducted numerical simulation to optimize the design. An improved simulation method is needed for calculation of various cases. To conduct circuit simulation of this micromotor, its structure is simplified, and a function for computing the force excited by the electrostatic field is added to the circuit simulator. We achieved a reasonably accurate simulation. We also considered an optimal drive waveform to achieve low-voltage operation.

Evaluation of an innovative color sensor for space application

NASA Astrophysics Data System (ADS)

Cessa, Virginie; Beauvivre, Stéphane; Pittet, Jacques; Dougnac, Virgile; Fasano, M.

2017-11-01

We present in this paper an evaluation of an innovative image sensor that provides color information without the need of organic filters. The sensor is a CMOS array with more than 4 millions pixels which filters the incident photons into R, G, and B channels, delivering the full resolution in color. Such a sensor, combining high performance with low power consumption, is of high interest for future space missions. The paper presents the characteristics of the detector as well as the first results of environmental testing.

Overview and major characteristics of future aeronautical and space systems

NASA Technical Reports Server (NTRS)

Venneri, Samuel L.; Noor, Ahmed K.

1992-01-01

A systematic projection is made of prospective materials and structural systems' performance requirements in light of emerging applications. The applications encompass high-speed/long-range rotorcraft, advanced subsonic commercial aircraft, high speed (supersonic) commercial transports, hypersonic aircraft and missiles, extremely high-altitude cruise aircraft and missiles, and aerospace craft and launch vehicles. A tabulation is presented of the materials/structures/dynamics requirements associated with future aerospace systems, as well as the further development needs foreseen in each such case.

Study of thermal management for space platform applications

NASA Technical Reports Server (NTRS)

Oren, J. A.

1980-01-01

Techniques for the management of the thermal energy of large space platforms using many hundreds of kilowatts over a 10 year life span were evaluated. Concepts for heat rejection, heat transport within the vehicle, and interfacing were analyzed and compared. The heat rejection systems were parametrically weight optimized over conditions for heat pipe and pumped fluid approaches. Two approaches to achieve reliability were compared for: performance, weight, volume, projected area, reliability, cost, and operational characteristics. Technology needs are assessed and technology advancement recommendations are made.

Rock mechanics issues in completion and stimulation operations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Warpinski, N.R.

Rock mechanisms parameters such as the in situ stresses, elastic properties, failure characteristics, and poro-elastic response are important to most completion and stimulation operations. Perforating, hydraulic fracturing, wellbore stability, and sand production are examples of technology that are largely controlled by the rock mechanics of the process. While much research has been performed in these areas, there has been insufficient application that research by industry. In addition, there are new research needs that must be addressed for technology advancement.

A helicopter handling-qualities study of the effects of engine response characteristics, height-control dynamics, and excess power on nap-of-the-Earth operations

NASA Technical Reports Server (NTRS)

Corliss, L. D.

1982-01-01

The helicopter configuration with an rpm-governed gas-turbine engine was examined. A wide range of engine response time, vehicle damping and sensitivity, and excess power levels was studied. The data are compared with the existing handling-qualities specifications, MIL-F-83300 and AGARD 577, and in general show a need for higher minimums when performing such NOE maneuvers as a dolphin and bob-up task.

Performance of biometric quality measures.

PubMed

Grother, Patrick; Tabassi, Elham

2007-04-01

We document methods for the quantitative evaluation of systems that produce a scalar summary of a biometric sample's quality. We are motivated by a need to test claims that quality measures are predictive of matching performance. We regard a quality measurement algorithm as a black box that converts an input sample to an output scalar. We evaluate it by quantifying the association between those values and observed matching results. We advance detection error trade-off and error versus reject characteristics as metrics for the comparative evaluation of sample quality measurement algorithms. We proceed this with a definition of sample quality, a description of the operational use of quality measures. We emphasize the performance goal by including a procedure for annotating the samples of a reference corpus with quality values derived from empirical recognition scores.

Testing the performance of dosimetry measurement standards for calibrating area and personnel dosimeters

NASA Astrophysics Data System (ADS)

Walwyn-Salas, G.; Czap, L.; Gomola, I.; Tamayo-García, J. A.

2016-07-01

The cylindrical NE2575 and spherical PTW32002 chamber types were tested in this paper to determine their performance at different source-chamber distances, field sizes and two radiation qualities. To ensure an accurate measurement, there is a need to apply a correction factor to NE2575 measurements at different distances because of differences found between the reference point defined by the manufacturer and the effective point of measurements. This correction factor for NE2575 secondary standard from the Center for Radiation Protection and Hygiene of Cuba was assessed with a 0.3% uncertainty using the results of three methods. Those laboratories that use the NE2575 chambers should take into consideration the performance characteristics tested in this paper to obtain accurate measurements.

The characteristics of medical students' personality types and interpersonal needs.

PubMed

Hur, Yera; Cho, A-Ra; Kim, Sun

2013-12-01

Medical students' personality types and interpersonal needs must be considered. The purpose of this study was to examine the characteristics of personality types and interpersonal needs. A total of 171 students in Konyang University College of Medicine were examined using the Myers-Briggs Type Indicator (MBTI) and Fundamental Interpersonal Relations Orientation-Behavior (FIRO-B). The data were analyzed by frequency analysis, t-test, and one-sample proportion test. The proportion of the 4 pairs of MBTI dimensions were Extroversion (E)-Introversion (I) (53.2% vs. 46.8%), Sensing (S)-Intuition (N) (63.2% vs. 36.8%), Thinking (T)-Feeling (F) (59.7% vs. 40.4%), and Judging (J)-Perceiving (P) (56.1% vs. 43.9%). The predominant personality types were ISTJ (16.4%), ESTJ (14.0%), and ESFJ (10.5%). The level of interpersonal needs were medium rage that was inclusion (mean=8.1), control (mean=8.8), affection (mean=8.1), expressed behavior (mean=12.1), wanted behavior (mean=12.9), and overall interpersonal needs (mean=25.0). Of the basic social needs, males and females differed significantly with regard to control needs (p=0.028). Educational programs that take into account personality types and characteristics of interpersonal needs are crucial in providing effective medical education. Our results suggest that the characteristics of personality types and interpersonal needs should be considered in developing an interpersonal relations improvement program for medical students.

Evaluation of the performance of statistical tests used in making cleanup decisions at Superfund sites. Part 1: Choosing an appropriate statistical test

DOE Office of Scientific and Technical Information (OSTI.GOV)

Berman, D.W.; Allen, B.C.; Van Landingham, C.B.

1998-12-31

The decision rules commonly employed to determine the need for cleanup are evaluated both to identify conditions under which they lead to erroneous conclusions and to quantify the rate that such errors occur. Their performance is also compared with that of other applicable decision rules. The authors based the evaluation of decision rules on simulations. Results are presented as power curves. These curves demonstrate that the degree of statistical control achieved is independent of the form of the null hypothesis. The loss of statistical control that occurs when a decision rule is applied to a data set that does notmore » satisfy the rule`s validity criteria is also clearly demonstrated. Some of the rules evaluated do not offer the formal statistical control that is an inherent design feature of other rules. Nevertheless, results indicate that such informal decision rules may provide superior overall control of error rates, when their application is restricted to data exhibiting particular characteristics. The results reported here are limited to decision rules applied to uncensored and lognormally distributed data. To optimize decision rules, it is necessary to evaluate their behavior when applied to data exhibiting a range of characteristics that bracket those common to field data. The performance of decision rules applied to data sets exhibiting a broader range of characteristics is reported in the second paper of this study.« less

Comparison of the ANSI, RSD, KKH, and BRMD thyroid-neck phantoms for 125I thyroid monitoring.

PubMed

Kramer, G H; Olender, G; Vlahovich, S; Hauck, B M; Meyerhof, D P

1996-03-01

The Human Monitoring Laboratory, which acts as the Canadian National Calibration Reference Centre for In Vivo Monitoring, has determined the performance characteristics of four thyroid phantoms for 125I thyroid monitoring. The phantoms were a phantom built to the specifications of the American National Standards Institute Standard N44.3; the phantom available from Radiology Support Devices; the phantom available from Kyoto Kagaku Hyohon; the phantom manufactured by the Human Monitoring Laboratory and known as the BRMD phantom. The counting efficiencies of the phantoms for 125I were measured at different phantom-to-detector distances. The anthropomorphic characteristics of the phantoms have been compared with the average man parameters. It was concluded that the BRMD, American National Standards Institute, and Radiology Support Devices phantoms have the same performance characteristics when the neck-to-detector distances are greater than 12 cm and all phantoms are essentially equivalent at 30 cm or more. The Kyoto Kagaku Hyohon phantom showed lower counting efficiencies at phantom-to-detector distances less than 30 cm. This was attributed to the design of the phantom. This study has also shown that the phantom need not be highly anthropomorphic provided the calibration is not performed at short neck-detector distances. Indeed, it might be possible to use t simple point source of 125I placed behind a 1.5 cm block of lucite at neck detector distances of 12 cm or more.

Practice Guidelines for Operative Performance Assessments.

PubMed

Williams, Reed G; Kim, Michael J; Dunnington, Gary L

2016-12-01

To provide recommended practice guidelines for assessing single operative performances and for combining results of operative performance assessments into estimates of overall operative performance ability. Operative performance is one defining characteristic of surgeons. Assessment of operative performance is needed to provide feedback with learning benefits to surgical residents in training and to assist in making progress decisions for residents. Operative performance assessment has been a focus of investigation over the past 20 years. This review is designed to integrate findings of this research into a set of recommended operative performance practices. Literature from surgery and from other pertinent research areas (psychology, education, business) was reviewed looking for evidence to inform practice guideline development. Guidelines were created along with a conceptual and scientific foundation for each guideline. Ten guidelines are provided for assessing individual operative performances and 10 are provided for combing data from individual operative performances into overall judgments of operative performance ability. The practice guidelines organize available information to be immediately useful to program directors, to support surgical training, and to provide a conceptual framework upon which to build as the base of pertinent knowledge expands through future research and development efforts.

Improvement of the environmental and operational characteristics of vehicles through decreasing the motor fuel density.

PubMed

Magaril, Elena

2016-04-01

The environmental and operational characteristics of motor transport, one of the main consumers of motor fuel and source of toxic emissions, soot, and greenhouse gases, are determined to a large extent by the fuel quality which is characterized by many parameters. Fuel density is one of these parameters and it can serve as an indicator of fuel quality. It has been theoretically substantiated that an increased density of motor fuel has a negative impact both on the environmental and operational characteristics of motor transport. The use of fuels with a high density leads to an increase in carbonization within the engine, adversely affecting the vehicle performance and increasing environmental pollution. A program of technological measures targeted at reducing the density of the fuel used was offered. It includes a solution to the problem posed by changes in the refining capacities ratio and the temperature range of gasoline and diesel fuel boiling, by introducing fuel additives and adding butanes to the gasoline. An environmental tax has been developed which allows oil refineries to have a direct impact on the production of fuels with improved environmental performance, taking into account the need to minimize the density of the fuel within a given category of quality.

Assessing sorbent injection mercury control effectiveness in flue gas streams

USGS Publications Warehouse

Carey, T.R.; Richardson, C.F.; Chang, R.; Meserole, F.B.; Rostam-Abadi, M.; Chen, S.

2000-01-01

One promising approach for removing mercury from coal-fired, utility flue gas involves the direct injection of mercury sorbents. Although this method has been effective at removing mercury in municipal waste incinerators, tests conducted to date on utility coal-fired boilers show that mercury removal is much more difficult in utility flue gas. EPRI is conducting research to investigate mercury removal using sorbents in this application. Bench-scale, pilot-scale, and field tests have been conducted to determine the ability of different sorbents to remove mercury in simulated and actual flue gas streams. This paper focuses on recent bench-scale and field test results evaluating the adsorption characteristics of activated carbon and fly ash and the use of these results to develop a predictive mercury removal model. Field tests with activated carbon show that adsorption characteristics measured in the lab agree reasonably well with characteristics measured in the field. However, more laboratory and field data will be needed to identify other gas phase components which may impact performance. This will allow laboratory tests to better simulate field conditions and provide improved estimates of sorbent performance for specific sites. In addition to activated carbon results, bench-scale and modeling results using fly ash are presented which suggest that certain fly ashes are capable of adsorbing mercury.

Real-time seismic monitoring needs of a building owner - And the solution: A cooperative effort

USGS Publications Warehouse

Celebi, M.; Sanli, A.; Sinclair, M.; Gallant, S.; Radulescu, D.

2004-01-01

A recently implemented advanced seismic monitoring system for a 24-story building facilitates recording of accelerations and computing displacements and drift ratios in near-real time to measure the earthquake performance of the building. The drift ratio is related to the damage condition of the specific building. This system meets the owner's needs for rapid quantitative input to assessments and decisions on post-earthquake occupancy. The system is now successfully working and, in absence of strong shaking to date, is producing low-amplitude data in real time for routine analyses and assessment. Studies of such data to date indicate that the configured monitoring system with its building specific software can be a useful tool in rapid assessment of buildings and other structures following an earthquake. Such systems can be used for health monitoring of a building, for assessing performance-based design and analyses procedures, for long-term assessment of structural characteristics, and for long-term damage detection.

Novel localized heating technique on centrifugal microfluidic disc with wireless temperature monitoring system.

PubMed

Joseph, Karunan; Ibrahim, Fatimah; Cho, Jongman

2015-01-01

Recent advances in the field of centrifugal microfluidic disc suggest the need for electrical interface in the disc to perform active biomedical assays. In this paper, we have demonstrated an active application powered by the energy harvested from the rotation of the centrifugal microfluidic disc. A novel integration of power harvester disc onto centrifugal microfluidic disc to perform localized heating technique is the main idea of our paper. The power harvester disc utilizing electromagnetic induction mechanism generates electrical energy from the rotation of the disc. This contributes to the heat generation by the embedded heater on the localized heating disc. The main characteristic observed in our experiment is the heating pattern in relative to the rotation of the disc. The heating pattern is monitored wirelessly with a digital temperature sensing system also embedded on the disc. Maximum temperature achieved is 82 °C at rotational speed of 2000 RPM. The technique proves to be effective for continuous heating without the need to stop the centrifugal motion of the disc.

Predictors of unmet dental need in children with autism spectrum disorder: Results from a national sample

PubMed Central

McKinney, Christy M.; Nelson, Travis; Scott, JoAnna M.; Heaton, Lisa J.; Vaughn, Matthew G.; Lewis, Charlotte W.

2014-01-01

Objective Unmet dental need in children with autism spectrum disorder (ASD) is common. We tested hypotheses that lacking a medical home or having characteristics of more severe ASD is positively associated with having unmet dental need among children with ASD. Methods Using data from the 2009–2010 National Survey of Children with Special Health Care Needs, we analyzed 2,772 children 5–17 years old with ASD. We theorized unmet dental need would be positively associated with not having a medical home and having characteristics of more severe ASD (e.g. parent reported severe ASD, an intellectual disability, communication or behavior difficulties). Prevalence of unmet dental need was estimated, and unadjusted and adjusted odds ratios (ORs), 95% confidence intervals (CIs), and p-values were computed using survey methods for logistic regression. Results Nationally, 15.1% of children with ASD had unmet dental need. Among children with ASD, those without a medical home were more apt to have unmet dental need than those with a medical home (adjusted OR 4.46, 95% CI: 2.59, 7.69). Children with ASD with intellectual disability or greater communication or behavioral difficulties had greater odds of unmet dental need than those with ASD without these characteristics. Parent reported ASD severity was not associated with unmet dental need. Conclusions Children with ASD without a medical home and with characteristics suggestive of increased ASD-related difficulties are more apt to have unmet dental need. Pediatricians may use these findings to aid in identifying children with ASD who may not receive all needed dental care. PMID:25439161

78 FR 18988 - Establishing the Performance Characteristics of In Vitro Diagnostic Devices for the Detection of...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-28

...] Establishing the Performance Characteristics of In Vitro Diagnostic Devices for the Detection of Antibodies to... announcing the availability of the guidance entitled ``Establishing the Performance Characteristics of In... document entitled ``Establishing the Performance Characteristics of In Vitro Diagnostic Devices for the...

The Progress of US Hospitals in Addressing Community Health Needs.

PubMed

Cramer, Geri Rosen; Singh, Simone R; Flaherty, Stephen; Young, Gary J

2017-02-01

To identify how US tax-exempt hospitals are progressing in regard to community health needs assessment (CHNA) implementation following the Patient Protection and Affordable Care Act. We analyzed data on more than 1500 tax-exempt hospitals in 2013 to assess patterns in CHNA implementation and to determine whether a hospital's institutional and community characteristics are associated with greater progress. Our findings show wide variation among hospitals in CHNA implementation. Hospitals operating as part of a health system as well as hospitals participating in a Medicare accountable care organization showed greater progress in CHNA implementation whereas hospitals serving a greater proportion of uninsured showed less progress. We also found that hospitals reporting the highest level of CHNA implementation progress spent more on community health improvement. Hospitals widely embraced the regulations to perform a CHNA. Less is known about how hospitals are moving forward to improve population health through the implementation of programs to meet identified community needs.

Health/functioning characteristics, gambling behaviors and gambling-related motivations in adolescents stratified by gambling problem severity: Findings from a high-school survey

PubMed Central

Yip, Sarah W.; Desai, Rani A.; Steinberg, Marvin A.; Rugle, Loreen; Cavallo, Dana A.; Krishnan-Sarin, Suchitra; Potenza, Marc N.

2013-01-01

In adults, different levels of gambling problem severity are differentially associated with measures of health and general functioning, gambling behaviors and gambling-related motivations. Here we present data from a survey of 2,484 Connecticut high school students, and investigate the data stratifying by gambling problem severity based on DSM-IV criteria for pathological gambling. Problem/pathological gambling was associated with a range of negative functions; e.g., poor academic performance, substance use, dysphoria/depression, and aggression. These findings suggest a need for improved interventions related to adolescent gambling and a need for additional research into the relationship (e.g., mediating factors) between gambling and risk and protective behaviors. PMID:21999494

FRamework Assessing Notorious Contributing Influences for Error (FRANCIE): Perspective on Taxonomy Development to Support Error Reporting and Analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lon N. Haney; David I. Gertman

2003-04-01

Beginning in the 1980s a primary focus of human reliability analysis was estimation of human error probabilities. However, detailed qualitative modeling with comprehensive representation of contextual variables often was lacking. This was likely due to the lack of comprehensive error and performance shaping factor taxonomies, and the limited data available on observed error rates and their relationship to specific contextual variables. In the mid 90s Boeing, America West Airlines, NASA Ames Research Center and INEEL partnered in a NASA sponsored Advanced Concepts grant to: assess the state of the art in human error analysis, identify future needs for human errormore » analysis, and develop an approach addressing these needs. Identified needs included the need for a method to identify and prioritize task and contextual characteristics affecting human reliability. Other needs identified included developing comprehensive taxonomies to support detailed qualitative modeling and to structure meaningful data collection efforts across domains. A result was the development of the FRamework Assessing Notorious Contributing Influences for Error (FRANCIE) with a taxonomy for airline maintenance tasks. The assignment of performance shaping factors to generic errors by experts proved to be valuable to qualitative modeling. Performance shaping factors and error types from such detailed approaches can be used to structure error reporting schemes. In a recent NASA Advanced Human Support Technology grant FRANCIE was refined, and two new taxonomies for use on space missions were developed. The development, sharing, and use of error taxonomies, and the refinement of approaches for increased fidelity of qualitative modeling is offered as a means to help direct useful data collection strategies.« less

External fuel vaporization study, phase 1

NASA Technical Reports Server (NTRS)

Szetela, E. J.; Chiappetta, L.

1980-01-01

A conceptual design study was conducted to devise and evaluate techniques for the external vaporization of fuel for use in an aircraft gas turbine with characteristics similar to the Energy Efficient Engine (E(3)). Three vaporizer concepts were selected and they were analyzed from the standpoint of fuel thermal stability, integration of the vaporizer system into the aircraft engine, engine and vaporizer dynamic response, startup and altitude restart, engine performance, control requirements, safety, and maintenance. One of the concepts was found to improve the performance of the baseline E(3) engine without seriously compromising engine startup and power change response. Increased maintenance is required because of the need for frequent pyrolytic cleaning of the surfaces in contact with hot fuel.

Competition between Methanogens and Acetogens in Biocathodes: A Comparison between Potentiostatic and Galvanostatic Control

PubMed Central

Molenaar, Sam D.; Saha, Pradip; Mol, Annemerel R.; Sleutels, Tom H. J. A.; ter Heijne, Annemiek; Buisman, Cees J. N.

2017-01-01

Microbial electrosynthesis is a useful form of technology for the renewable production of organic commodities from biologically catalyzed reduction of CO2. However, for the technology to become applicable, process selectivity, stability and efficiency need strong improvement. Here we report on the effect of different electrochemical control modes (potentiostatic/galvanostatic) on both the start-up characteristics and steady-state performance of biocathodes using a non-enriched mixed-culture inoculum. Based on our results, it seems that kinetic differences exist between the two dominant functional microbial groups (i.e., homoacetogens and methanogens) and that by applying different current densities, these differences may be exploited to steer product selectivity and reactor performance. PMID:28106846

Competition between Methanogens and Acetogens in Biocathodes: A Comparison between Potentiostatic and Galvanostatic Control.

PubMed

Molenaar, Sam D; Saha, Pradip; Mol, Annemerel R; Sleutels, Tom H J A; Ter Heijne, Annemiek; Buisman, Cees J N

2017-01-19

Microbial electrosynthesis is a useful form of technology for the renewable production of organic commodities from biologically catalyzed reduction of CO₂. However, for the technology to become applicable, process selectivity, stability and efficiency need strong improvement. Here we report on the effect of different electrochemical control modes (potentiostatic/galvanostatic) on both the start-up characteristics and steady-state performance of biocathodes using a non-enriched mixed-culture inoculum. Based on our results, it seems that kinetic differences exist between the two dominant functional microbial groups (i.e., homoacetogens and methanogens) and that by applying different current densities, these differences may be exploited to steer product selectivity and reactor performance.

Electromagnetic Physics Models for Parallel Computing Architectures

NASA Astrophysics Data System (ADS)

Amadio, G.; Ananya, A.; Apostolakis, J.; Aurora, A.; Bandieramonte, M.; Bhattacharyya, A.; Bianchini, C.; Brun, R.; Canal, P.; Carminati, F.; Duhem, L.; Elvira, D.; Gheata, A.; Gheata, M.; Goulas, I.; Iope, R.; Jun, S. Y.; Lima, G.; Mohanty, A.; Nikitina, T.; Novak, M.; Pokorski, W.; Ribon, A.; Seghal, R.; Shadura, O.; Vallecorsa, S.; Wenzel, S.; Zhang, Y.

2016-10-01

The recent emergence of hardware architectures characterized by many-core or accelerated processors has opened new opportunities for concurrent programming models taking advantage of both SIMD and SIMT architectures. GeantV, a next generation detector simulation, has been designed to exploit both the vector capability of mainstream CPUs and multi-threading capabilities of coprocessors including NVidia GPUs and Intel Xeon Phi. The characteristics of these architectures are very different in terms of the vectorization depth and type of parallelization needed to achieve optimal performance. In this paper we describe implementation of electromagnetic physics models developed for parallel computing architectures as a part of the GeantV project. Results of preliminary performance evaluation and physics validation are presented as well.

High-Performance WSe2 Complementary Metal Oxide Semiconductor Technology and Integrated Circuits.

PubMed

Yu, Lili; Zubair, Ahmad; Santos, Elton J G; Zhang, Xu; Lin, Yuxuan; Zhang, Yuhao; Palacios, Tomás

2015-08-12

Because of their extraordinary structural and electrical properties, two-dimensional materials are currently being pursued for applications such as thin-film transistors and integrated circuit. One of the main challenges that still needs to be overcome for these applications is the fabrication of air-stable transistors with industry-compatible complementary metal oxide semiconductor (CMOS) technology. In this work, we experimentally demonstrate a novel high performance air-stable WSe2 CMOS technology with almost ideal voltage transfer characteristic, full logic swing and high noise margin with different supply voltages. More importantly, the inverter shows large voltage gain (∼38) and small static power (picowatts), paving the way for low power electronic system in 2D materials.

Advances in aluminum powder usage as an energetic material and applications for rocket propellant

NASA Astrophysics Data System (ADS)

Sadeghipour, S.; Ghaderian, J.; Wahid, M. A.

2012-06-01

Energetic materials have been widely used for military purposes. Continuous research programs are performing in the world for the development of the new materials with higher and improved performance comparing with the available ones in order to fulfill the needs of the military in future. Different sizes of aluminum powders are employed to produce composite rocket propellants with the bases of Ammonium Perchlorate (AP) and Hydroxyl-Terminated-Polybutadiene (HTPB) as oxidizer and binder respectively. This paper concentrates on recent advances in using aluminum as an energetic material and the properties and characteristics pertaining to its combustion. Nano-sized aluminum as one of the most attractable particles in propellants is discussed particularly.

Indium-gallium-zinc-oxide thin-film transistor with a planar split dual-gate structure

NASA Astrophysics Data System (ADS)

Liu, Yu-Rong; Liu, Jie; Song, Jia-Qi; Lai, Pui-To; Yao, Ruo-He

2017-12-01

An amorphous indium-gallium-zinc-oxide (a-IGZO) thin-film transistor (TFT) with a planar split dual gate (PSDG) structure has been proposed, fabricated and characterized. Experimental results indicate that the two independent gates can provide dynamical control of device characteristics such as threshold voltage, sub-threshold swing, off-state current and saturation current. The transconductance extracted from the output characteristics of the device increases from 4.0 × 10-6S to 1.6 × 10-5S for a change of control gate voltage from -2 V to 2 V, and thus the device could be used in a variable-gain amplifier. A significant advantage of the PSDG structure is its flexibility in controlling the device performance according to the need of practical applications.

Person-like intelligent systems architectures for robotic shared control and automated operations

NASA Technical Reports Server (NTRS)

Erickson, Jon D.; Aucoin, Paschal J., Jr.; Ossorio, Peter G.

1992-01-01

An approach to rendering robotic systems as 'personlike' as possible to achieve needed capabilities is outlined. Human characteristics such as knowledge, motivation, know-how, performance, achievement and individual differences corresponding to propensities and abilities can be supplied, within limits, with computing software and hardware to robotic systems provided with sufficiently rich sensory configurations. Pushing these limits is the developmental path for more and more personlike robotic systems. The portions of the Person Concept that appear to be most directly relevant to this effort are described in the following topics: reality concepts (the state-of-affairs system and descriptive formats, behavior as intentional action, individual persons (person characteristics), social patterns of behavior (social practices), and boundary conditions (status maxims). Personlike robotic themes and considerations for a technical development plan are also discussed.

Transient Characteristics of Free Piston Vuilleurnier Cycle Heat Pumps

NASA Astrophysics Data System (ADS)

Matsue, Junji; Fujimoto, Norioki; Shirai, Hiroyuki

A dynamic analysis of a free piston Vuilleumier cycle heat pump was performed using a time-stepping integration method to investigate transient characteristics under power controlling. The nonlinear relationship between displacement and force for pistons was taken into account for the motion of reciprocating components. The force for pistons is mainly caused by the pressure change of working gas varying with piston displacements; moreover nonlinear viscous dissipative force due to the oscillating flow of working gas in heat exchangers and discontinuous damping force caused by solid friction at piston seals and rod seals are included. The displacements of pistons and pressure changes in the Vuilleumier cycle heat pump were integrated by an ideal isothermal thermodynamic relationship. It was assumed that the flow friction was proportional to the kinematic pressure of working gas, and that the solid friction at the seals was due to the functions of the working gas pressure and the tension of seal springs. In order to investigate the transient characteristics of a proposed free piston Vuilleumier cycle heat pump machine when hot-side working gas temperatures and alternate force were changed, some calculations were performed and discussed. These calculation results make clear transient characteristics at starting and power controlling. It was further found that only a small amount of starter power is required in particular conditions. During controlling, the machine becomes unstable when there is ar elatively large reduction in cooling or heating power. Therefore, an auxiliary device is additionally needed to obtain stable operation, such as al inear motor.

Bereaved relatives' decision about deceased organ donation: An integrated psycho-social study conducted in Spain.

PubMed

López, Jorge S; Martínez, José M; Soria-Oliver, María; Aramayona, Begoña; García-Sánchez, Rubén; Martín, María J; Almendros, Carmen

2018-05-01

Family refusal to organ donation of a deceased relative represents one of the most important barriers to organ transplantation. Although a large literature about family decisions has amassed, the existing evidence needs further integration and structuring. This study seeks to analyse relationships between bereaved relatives' decisions and a wide range of factors that converge in the family decision process, including interactions and complex relationship patterns, and taking psychosocial theoretical frameworks as reference to conceptualize empirical findings. This observational study examined 16 Spanish hospitals during a 36-month period. Transplant coordination teams collected data of 421 cases of family decision processes about donation (338 donations/83 refusals) through a previously validated instrument. Indicators of the following factors were collected: deceased's characteristics; circumstances of death; bereaved relatives' characteristics, beliefs, and expressions; behaviour of health and coordination staff; and family's emotional responses. Three global hypotheses related to bivariate and multivariate relations of factors with family decisions and relationships/interactions among factors were tested. Relatives' beliefs about the deceased's wishes concerning donation are the strongest predictor of family decisions. However, family decisions are also related to the deceased's characteristics, relatives' characteristics, satisfaction with medical attention, satisfaction with personal treatment and relatives' emotional responses, and other factors. Relatives' emotional reactions are related to satisfaction with health-staff interventions and condition family decision, even if deceased's will concerning donation is known and positive. Relatives' beliefs about deceased's wishes concerning donation vary as a function of deceased's characteristics and according to relatives' characteristics. Understanding of family decisions underlying organ donation may greatly benefit from a more complex, integrated, and theoretically based approach. Educational efforts should stress the need to register or simply communicate own willingness to donate organs. However, an adequate training and performance of the health-staff involved in the organ donation process may generate substantive differences in consent rates. Copyright © 2018 Elsevier Ltd. All rights reserved.

Storage Characteristics of Lithium Ion Cells

NASA Technical Reports Server (NTRS)

Ratnakumar, B. V.; Smart, M. C.; Blosiu, J. O.; Surampudi, S.

2000-01-01

Lithium ion cells are being developed under the NASA/Air Force Consortium for the upcoming aerospace missions. First among these missions are the Mars 2001 Lander and Mars 2003 Lander and Rover missions. Apart from the usual needs of high specific energy, energy density and long cycle life, a critical performance characteristic for the Mars missions is low temperature performance. The batteries need to perform well at -20 C, with at least 70% of the rated capacity realizable at moderate discharge rates (C/5). Several modifications have been made to the lithium ion chemistry, mainly with respect to the electrolyte, both at JPL' and elsewhere to achieve this. Another key requirement for the battery is its storageability during pre-cruise and cruise periods. For the Mars programs, the cruise period is relatively short, about 12 months, compared to the Outer Planets missions (3-8 years). Yet, the initial results of our storage studies reveal that the cells do sustain noticeable permanent degradation under certain storage conditions, typically of 10% over two months duration at ambient temperatures, attributed to impedance buildup. The build up of the cell impedance or the decay in the cell capacity is affected by various storage parameters, i.e., storage temperature, storage duration, storage mode (open circuit, on buss or cycling at low rates) and state of charge. Our preliminary studies indicate that low storage temperatures and states of charge are preferable. In some cases, we have observed permanent capacity losses of approx. 10% over eight-week storage at 40 C, compared to approx. 0-2% at O C. Also, we are attempting to determine the impact of cell chemistry and design upon the storageability of Li ion cells.

Leisure time physical activity among older adults with long-term spinal cord injury.

PubMed

Jörgensen, S; Martin Ginis, K A; Lexell, J

2017-09-01

Cross-sectional. To describe participation in leisure time physical activity (LTPA) (amount, intensity and type) among older adults with long-term spinal cord injury (SCI), and to investigate the associations with sociodemographics, injury characteristics and secondary health conditions (SHCs). Home settings in southern Sweden. Data from the Swedish Aging with Spinal Cord Injury Study (SASCIS). The physical activity recall assessment for people with SCI was used to assess LTPA among 84 men and 35 women (mean age 63.5 years, mean time since injury 24 years, injury levels C1-L5, American Spinal Injury Association Impairment Scale A-D). Associations were analyzed statistically using hierarchical multivariable regression. Twenty-nine percent reported no LTPA, whereas 53% performed moderate-to-heavy intensity LTPA. The mean minutes per day of total LTPA was 34.7 (±41.5, median 15, range 0-171.7) and of moderate-to-heavy LTPA 22.5 (±35.1, median 5.0, range 0-140.0). The most frequently performed activities were walking and wheeling. Sociodemographics, injury characteristics and SHCs (bowel-related and bladder-related problems, spasticity and pain) explained 10.6% and 13.4%, respectively, of the variance in total and moderate-to-heavy LTPA. Age and wheelchair use were significantly, negatively associated with total LTPA. Women, wheelchair users and employed participants performed significantly less moderate-to-heavy LTPA than men, those using walking devices/no mobility device and unemployed participants. Many older adults with long-term SCI do not reach the amount or intensity of LTPA needed to achieve fitness benefits. Research is needed on how to increase LTPA and to identify modifiable factors that could enhance their participation.

Comparison of scoring systems for nonvariceal upper gastrointestinal bleeding: a multicenter prospective cohort study.

PubMed

Yang, Hae Min; Jeon, Seong Woo; Jung, Jin Tae; Lee, Dong Wook; Ha, Chang Yoon; Park, Kyung Sik; Lee, Si Hyung; Yang, Chang Heon; Park, Jun Hyung; Park, Youn Sun

2016-01-01

The Glasgow-Blatchford score (GBS) and Rockall score (RS) are widely used to assess risk in patients with upper gastrointestinal bleeding (UGIB). We compared both scoring systems and evaluated their clinical usefulness. Between February 2011 and December 2013, 1584 patients with nonvariceal UGIB were included in the study. A prospective study was conducted to compare the performance of the GBS, pre-RS, and full RS. We compared the performance of these scores using receiver operating characteristic curves. For prediction of the need for hospital-based intervention, the GBS was similar to the full RS (area under the receiver operating characteristic curves [AUROC] 0.705 vs 0.727; P = 0.282) and superior to the pre-RS (AUROC 0.705 vs 0.601; P < 0.0001). In predicting death, the full RS was superior to the GBS (AUROC 0.758 vs 0.644; P = 0.0006) and similar to the pre-RS (AUROC 0.758 vs 0.754; P = 0.869). In predicting rebleeding, the full RS was superior to both GBS (AUROC 0.642 vs 0.585; P = 0.031) and pre-RS (AUROC 0.642 vs 0.593; P = 0.0003). Of 1584 patients, 13 (0.8%) scored 0 on the GBS. Therapeutic intervention was not performed in any of these patients. The GBS is more useful than the pre-RS for predicting the need for hospital-based intervention. A cutoff value of 0 for low-risk patients who might be suitable for outpatient management is useful. The full RS is helpful in predicting death. None of the systems accurately predict rebleeding with a low AUROC. ( cris.nih.go.kr/KCT0000514). © 2015 Journal of Gastroenterology and Hepatology Foundation and Wiley Publishing Asia Pty Ltd.

Too big or too narrow? Disturbance characteristics determine the functional resilience in virtual microbial ecosystems

NASA Astrophysics Data System (ADS)

König, Sara; Firle, Anouk-Letizia; Koehnke, Merlin; Banitz, Thomas; Frank, Karin

2017-04-01

In general ecology, there is an ongoing debate about the influence of fragmentation on extinction thresholds. Whether this influence is positive or negative depends on the considered type of fragmentation: whereas habitat fragmentation often has a negative influence on population extinction thresholds, spatially fragmented disturbances are observed to have mostly positive effects on the extinction probability. Besides preventing population extinction, in soil systems ecology we are interested in analyzing how ecosystem functions are maintained despite disturbance events. Here, we analyzed the influence of disturbance size and fragmentation on the functional resilience of a microbial soil ecosystem. As soil is a highly heterogeneous environment exposed to disturbances of different spatial configurations, the identification of critical disturbance characteristics for maintaining its functions is crucial. We used the numerical simulation model eColony considering bacterial growth, degradation and dispersal for analyzing the dynamic response of biodegradation examplary for an important microbial ecosystem service to disturbance events of different spatial configurations. We systematically varied the size and the degree of fragmentation of the affected area (disturbance pattern). We found that the influence of the disturbance size on functional recovery and biodegradation performance highly depends on the spatial fragmentation of the disturbance. Generally, biodegradation performance decreases with increasing clumpedness and increasing size of the affected area. After spatially correlated disturbance events, biodegradation performance decreases linear with increasing disturbance size. After spatially fragmented disturbance events, on the other hand, an increase in disturbance size has no influence on the biodegradation performance until a critical disturbance size is reached. Is the affected area bigger than this critical size, the functional performance decreases dramatically. Under recurrent disturbance events, this threshold is shifted to lower disturbance sizes. The more frequent disturbances are recurring, the lower is the critical disturbance size. Our simulation results indicate the importance of spatial characteristics of disturbance events for the functional resilience of microbial ecosystems. Critical values for disturbance size and fragmentation emerge from an interplay between both characteristics. In consequence, a precise definition of the specific disturbance regime is necessary for analysing functional resilience. With this study, we show that we need to consider the influence of fragmentation in terrestrial environments not only on population extincions but also on the resilience of ecosystem functions. Moreover, spatial disturbance characteristics - which are widely discussed on landscape scale - are an important factor on smaller scales, too.

Determination of Functional Capabilities, the Level of Physical Performance and the State of Main Physiological Body Systems in the First Hours after the Accomplishment of Long-term Space Flights ("Field Test")

NASA Technical Reports Server (NTRS)

Kozlovskaya, Inesa; Tomilovskaya, Elena; Rukavishnikov, Ilya; Kitov, Vladimir; Reschke, Millard; Kofman, Igor

2014-01-01

Long-term stay in weightlessness is accompanied by alterations in the activity of main physiological body systems including sensory-motor, skeletal-muscular disturbances and cardiovascular deconditioning. However, up to now, there are no data on the state and level of functional performance of cosmonauts/astronauts directly after flight, nor are there data to help define the dynamic recovery of functional characteristics and work efficiency which are greatly needed to provide the safety and planning of their activity once they reach space objects. The Russian and American scientists are currently engaged in a joint experiment known as the "Field Test" with the goal of studying the functional performance and the state of main physiological body systems directly after landing and their temporal recovery dynamics. The functional performance is identified during the test by temporal characteristics of the movements of spatial translation, the stability of the vertical stance for 3.5 min, and the kinematic characteristics of walking - non-complicated and complicated. The following characteristics are identified as physiological characteristics of the test: a) orthostatic tolerance during stand test, b) back muscle tone; c) vertical stability - by characteristics of the correction responses to unexpected perturbations of the vertical stance, and d) support reactions during the performance of the full battery of tests. To date, a pilot version of the "Field Test" has been conducted with participation from four Russian cosmonauts. The results of studies have shown that in 1 - 5 hours after landing the functional abilities of the cosmonauts are considerably reduced. All the test movements at this time are considerably slower than preflight and the more complicated the task is, the greater significant reduction in orthostatic tolerance: during the first test that occurs 1 - 5 hours after landing. two of four cosmonauts declined to continue the task after the orthostatic test (one of them did not wear the anti-G suit "Centaurus" during testing). Blood pressure during moving out of prone posture to vertical stance in one of the cosmonauts and of sitting to standing position in the other dropped to the precollapse level. The results of the studies have confirmed the feasibility, the usefulness and the safety of conducting tests as close as possible to the landing. The program of "Field Test" experiment will be continued and extended.

Comparison Between Elite and Subelite Swimmers on Dry Land and Tumble Turn Leg Extensor Force-Time Characteristics.

PubMed

Jones, Julian V; Pyne, David B; Haff, G Greg; Newton, Robert U

2018-06-01

Jones, JV, Pyne, DB, Haff, GG, and Newton, RU. Comparison between elite and subelite swimmers on dry land and tumble turn leg extensor force-time characteristics. J Strength Cond Res 32(6): 1762-1769, 2018-Elite swimmers demonstrate faster swimming turn times that are potentially a result of having better strength-power characteristics than subelite swimmers. We quantified differences between dry-land and swimming turn force-time characteristics in elite swimmers and subelite swimmers. Subelite (11 males: 17.4 ± 0.6 years; 10 females: 17.1 ± 0.6 years) and elite swimmers (15 male: 23.2 ± 2.3 years; 7 female: 21.6 ± 2.5 years) were tested in a cross-sectional design. All swimmers performed a body weight and loaded (20 kg females, 30 kg males) squat jump (SJ) on a portable force platform. On the same day, all swimmers completed swimming turn analyses using a force platform fixed within the pool wall. The magnitude of difference between groups was estimated using a standardized mean difference (effect size statistic). Elite male and female swimmers had superior swimming turn and dry-land force-time characteristics to subelite swimmers in all tests. The standardized mean differences between groups ranged from small to very large. The largest differences were SJ peak velocity unloaded (3.07 ± 1.0 m·s males, 3.49 ± 2.29 m·s females; standardized mean difference ± 90% confidence limits) and SJ peak power unloaded (2.59 ± 0.79 w male, 2.80 ± 1.64 w female) with elite male and female swimmers having a ∼25-50% higher performance than the subelites in both characteristics. Elite swimmers exhibit superior strength and power characteristics for the swimming turn compared with younger and less experienced swimmers. A well-planned and executed strength and conditioning program is needed for emerging swimmers to develop these qualities, as they transition to senior levels.

Socio-demographic, Behavioral and Health Characteristics of Underage Female Sex Workers in Mozambique: The Need to Protect a Generation from HIV Risk.

PubMed

Inguane, Celso; Horth, Roberta Z; Miranda, Angélica E; Young, Peter W; Sathane, Isabel; Cummings, Beverley E; Augusto, Ângelo; Raymond, Henry F; Mcfarland, Willi

2015-12-01

Characteristics, HIV risk, and program coverage for underage female sex workers (FSW) are rarely systematically described worldwide. We compared characteristics of underage (15-17 years old) and adult (≥18 years old) FSW in three main urban areas of Mozambique (Maputo, Beira and Nampula) using data from three respondent-driven sampling surveys implemented in 2011-2012. Among survey participants, 9.8 % (39/400) in Maputo, 17.0 % (70/411) in Beira and 25.6 % (110/429) in Nampula were underage. Over half reported performing sex work to afford daily living, and 29.7-50.0 % had unprotected sex with their last client. The proportion of underage FSW having accessed care and prevention services was lower compared to adult FSW. While HIV prevalence among underage FSW was lower than in adults, it increased markedly with age. Our results point to the urgency of expanding prevention and care programs geared towards underage FSW.

Socio-demographic, Behavioral and Health Characteristics of Underage Female Sex Workers in Mozambique: The Need to Protect a Generation from HIV Risk

PubMed Central

Horth, Roberta Z.; Miranda, Angélica E.; Young, Peter W.; Sathane, Isabel; Cummings, Beverley E.; Augusto, Ângelo; Raymond, Henry F.; Mcfarland, Willi

2016-01-01

Characteristics, HIV risk, and program coverage for underage female sex workers (FSW) are rarely systematically described worldwide. We compared characteristics of underage (15–17 years old) and adult (≥18 years old) FSW in three main urban areas of Mozambique (Maputo, Beira and Nampula) using data from three respondent-driven sampling surveys implemented in 2011–2012. Among survey participants, 9.8 % (39/400) in Maputo, 17.0 % (70/411) in Beira and 25.6 % (110/429) in Nampula were underage. Over half reported performing sex work to afford daily living, and 29.7–50.0 % had unprotected sex with their last client. The proportion of underage FSW having accessed care and prevention services was lower compared to adult FSW. While HIV prevalence among underage FSW was lower than in adults, it increased markedly with age. Our results point to the urgency of expanding prevention and care programs geared towards underage FSW. PMID:25931241

Fabrication and characteristics of thin disc piezoelectric transformers based on piezoelectric buzzers with gap circles.

PubMed

Chang, Kuo-Tsai; Lee, Chun-Wei

2008-04-01

This paper investigates design, fabrication and test of thin disc piezoelectric transformers (PTs) based on piezoelectric buzzers with gap circles at different diameters of the gap circles. The performance test is focused on characteristics of voltage gains, including maximum voltage gains and maximum-gain frequencies, for each piezoelectric transformer under different load conditions. Both a piezoelectric buzzer and a gap circle on a silver electrode of the buzzer are needed to build any type of the PTs. Here, the gap circle is used to form a ring-shaped input electrode and a circle-shaped output electrode for each piezoelectric transformer. To do so, both structure and connection of a PT are first expressed. Then, operating principle of a PT and its related vibration mode observed by a carbon-power imaging technique are described. Moreover, an experimental setup for characterizing each piezoelectric transformer is constructed. Finally, effects of diameters of the gap circles on characteristics of voltage gains at different load resistances are discussed.

Experimental Investigations on Effect of Damage on Vibration Characteristics of a Reinforced Concrete Beam

NASA Astrophysics Data System (ADS)

Srinivas, V.; Jeyasehar, C. Antony; Ramanjaneyulu, K.; Sasmal, Saptarshi

2012-02-01

Need for developing efficient non-destructive damage assessment procedures for civil engineering structures is growing rapidly towards structural health assessment and management of existing structures. Damage assessment of structures by monitoring changes in the dynamic properties or response of the structure has received considerable attention in recent years. In the present study, damage assessment studies have been carried out on a reinforced concrete beam by evaluating the changes in vibration characteristics with the changes in damage levels. Structural damage is introduced by static load applied through a hydraulic jack. After each stage of damage, vibration testing is performed and system parameters were evaluated from the measured acceleration and displacement responses. Reduction in fundamental frequencies in first three modes is observed for different levels of damage. It is found that a consistent decrease in fundamental frequency with increase in damage magnitude is noted. The beam is numerically simulated and found that the vibration characteristics obtained from the measured data are in close agreement with the numerical data.

Proton shock acceleration using a high contrast high intensity laser

NASA Astrophysics Data System (ADS)

Gauthier, Maxence; Roedel, Christian; Kim, Jongjin; Aurand, Bastian; Curry, Chandra; Goede, Sebastian; Propp, Adrienne; Goyon, Clement; Pak, Art; Kerr, Shaun; Ramakrishna, Bhuvanesh; Ruby, John; William, Jackson; Glenzer, Siegfried

2015-11-01

Laser-driven proton acceleration is a field of intense research due to the interesting characteristics of this novel particle source including high brightness, high maximum energy, high laminarity, and short duration. Although the ion beam characteristics are promising for many future applications, such as in the medical field or hybrid accelerators, the ion beam generated using TNSA, the acceleration mechanism commonly achieved, still need to be significantly improved. Several new alternative mechanisms have been proposed such as collisionless shock acceleration (CSA) in order to produce a mono-energetic ion beam favorable for those applications. We report the first results of an experiment performed with the TITAN laser system (JLF, LLNL) dedicated to the study of CSA using a high intensity (5x1019W/cm2) high contrast ps laser pulse focused on 55 μm thick CH and CD targets. We show that the proton spectrum generated during the interaction exhibits high-energy mono-energetic features along the laser axis, characteristic of a shock mechanism.

Study on production of biodiesel from Jatropha oil and the performance and emission of a diesel engine

NASA Astrophysics Data System (ADS)

Nor, N. F. M.; Hafidzal, M. H. M.; Shamsuddin, S. A.; Ismail, M. S.; Hashim, A. H.

2015-05-01

The use of nonedible oil as a feedstock is needed to replace edible oil as an alternative fuel for diesel engine. This nonedible oils in diesel engine however leads to low performance and higher emission due to its high viscosity. The characteristics of the fuel can be improved through transesterification process. The yield of biodiesel from Jatropha oil using potassium hydroxide catalyst concentration of 1%, reaction temperature 60°C, reaction time 40 minutes and molar ratio methanol to oil 6:1 was 70.1% from the lab scale. The experimental study on the performances and emissions of a diesel engine is carried out using the Jatropha biodiesel produced from the transesterification process and compared with pure diesel. Results show that B20 has closer performance to diesel and lower emission compared to B5 and diesel in terms of CO2 and HC.

Rising inability to obtain needed health care among homeless persons in Birmingham, Alabama (1995-2005).

PubMed

Kertesz, Stefan G; Hwang, Stephen W; Irwin, Jay; Ritchey, Ferris J; Lagory, Mark E

2009-07-01

Homeless persons depend disproportionately on the health-care safety net for medical services. National reports identify financial strains to this safety net. Whether this has affected homeless persons is unknown. We quantified changes in the proportion of homeless persons reporting unmet need for health care in Birmingham, Alabama, comparing two periods, 1995 and 2005. We assessed whether a period effect was independent of characteristics of persons surveyed. Analysis of two surveys conducted with identical methods among representative samples of homeless persons in 1995 (n = 161) and 2005 (n = 161). Report of unmet need (inability to obtain care when needed) was the dependent variable. Two survey periods (1995 and 2005) were compared, with multivariable adjustment for sociodemographic and health characteristics. Reasons for unmet need were determined among the subset of persons reporting unmet need. Unmet need for health care was more common in 2005 (54%) than in 1995 (32%) (p < 0.0001), especially for non-Blacks (64%) and females (65%). Adjusting for individual characteristics, a survey year of 2005 independently predicted unmet need (odds ratio 2.68, 95% CI 1.49-4.83). Among persons reporting unmet need (87 of 161 in 2005; 52 of 161 in 1995), financial barriers were more commonly cited in 2005 (67% of 87) than in 1995 (42% of 52) (p = 0.01). A rise in unmet health-care needs was reported among Birmingham's homeless from 1995 to 2005. This period effect was independent of population characteristics and may implicate a local safety net inadequacy. Additional data are needed to determine if this represents a national trend.

Identification of the Characteristics and Attributes Needed for Career Success in Entry-Level Management Positions in Selected Retailing Industry.

ERIC Educational Resources Information Center

Ahearn, Anne C. Erikson

A study examined the characteristics and attributes needed by individuals for career success in entry-level management positions in the retailing industry. Included among the specific objectives of the study were the following: identification of the educational level and retailing experience needed by successful entry-level retail managers,…

Factors associated with the impact of quality improvement collaboratives in mental healthcare: An exploratory study

PubMed Central

2012-01-01

Background Quality improvement collaboratives (QICs) bring together groups of healthcare professionals to work in a structured manner to improve the quality of healthcare delivery within particular domains. We explored which characteristics of the composition, participation, functioning, and organization of these collaboratives related to changes in the healthcare for patients with anxiety disorders, dual diagnosis, or schizophrenia. Methods We studied three QICs involving 29 quality improvement (QI) teams representing a number of mental healthcare organizations in the Netherlands. The aims of the three QICs were the implementation of multidisciplinary practice guidelines in the domains of anxiety disorders, dual diagnosis, and schizophrenia, respectively. We used eight performance indicators to assess the impact of the QI teams on self-reported patient outcomes and process of care outcomes for 1,346 patients. The QI team members completed a questionnaire on the characteristics of the composition, participation in a national program, functioning, and organizational context for their teams. It was expected that an association would be found between these team characteristics and the quality of care for patients with anxiety disorders, dual diagnosis, and schizophrenia. Results No consistent patterns of association emerged. Theory-based factors did not perform better than practice-based factors. However, QI teams that received support from their management and both active and inspirational team leadership showed better results. Rather surprisingly, a lower average level of education among the team members was associated with better results, although less consistently than the management and leadership characteristics. Team views with regard to the QI goals of the team and attitudes towards multidisciplinary practice guidelines did not correlate with team success. Conclusions No general conclusions about the impact of the characteristics of QI teams on the quality of healthcare can be drawn, but support of the management and active, inspirational team leadership appear to be important. Not only patient outcomes but also the performance indicators of monitoring and screening/assessment showed improvement in many but not all of the QI teams with such characteristics. More studies are needed to identify factors associated with the impact of multidisciplinary practice guidelines in mental healthcare. PMID:22230594

Reading and spelling skills in German third graders: Examining the role of student and context characteristics.

PubMed

von Suchodoletz, Antje; Larsen, Ross A A; Gunzenhauser, Catherine; Fäsche, Anika

2015-12-01

Educational processes and outcomes are influenced by a multitude of factors, including individual and contextual characteristics. Recently, studies have demonstrated that student and context characteristics may produce unique and cumulative effects on educational outcomes. The study aimed to investigate (1) the relative contribution of student, classroom, and school characteristics to reading fluency and orthographic spelling, (2) the relative contribution of specific predictors to reading fluency and orthographic spelling within the sets of student, classroom, and school characteristics, and (3) whether the contribution of student, classroom, and school characteristics differs for reading fluency and orthographic spelling. Participants were 789 German third-grade students from 56 classrooms in 34 schools. Students completed an intelligence test and a questionnaire assessing self-control. Reading fluency and orthographic spelling performance were assessed using standardized achievement tests. Multilevel structural equation modelling was used to control for the hierarchical structure of educational data. Variances in students' reading and spelling skills were in large part explained by student characteristics (>90%). Classroom and school characteristics yielded little variance. Student-level intelligence and self-control were significantly related to reading fluency. For orthographic spelling, student-level intelligence and self-control, class-average intelligence, and, at the school level, the socio-economic status of the school's neighbourhood were significant predictors. Future research needs to investigate relevant classroom and school factors that may directly and indirectly relate to academic outcomes. © 2015 The British Psychological Society.

Internationally adopted children with cleft lip and/or palate: A retrospective cohort study.

PubMed

Werker, C L; de Wilde, H; Mink van der Molen, A B; Breugem, C C

2017-12-01

The treatment approach for internationally adopted children with cleft lip and/or palate differs from locally born children with cleft lip and/or palate. They are older at initial presentation, may have had treatment abroad of different quality, and are establishing new and still fragile relationships with their adoptive parents. The aim of this study was to describe the characteristics and initial care and treatment of this group. A retrospective cohort study was performed including all internationally adopted children with cleft lip and/or palate presenting to the cleft team outpatient clinic in the Wilhelmina Children's Hospital between January 1994 and December 2014. Medical records of all patients were reviewed; information concerning demographic characteristics, characteristics at initial presentation, and treatment were obtained. A total number of 132 adopted patients were included: 15% had cleft lip, 7% had cleft palate, and 78% had cleft lip and palate. The average age at the time of adoption was 26.5 months. In most cases, China was the country of origin. Seventy-eight percent had surgery in their country of origin, primarily lip repair. Fistulae in need of revision surgery were found in 8% of the patients. Pharyngoplasty was needed in 48% of the patients. No significant differences were found for mean age at adoption, gender, cleft type, and one- or two-stage palatal closure. Internationally adopted children with cleft lip and/or palate are a very diverse group of patients with challenging treatment. These children undergo surgery late and frequently need additional surgery. Copyright © 2017 British Association of Plastic, Reconstructive and Aesthetic Surgeons. Published by Elsevier Ltd. All rights reserved.

Characteristics of coordinated ongoing comprehensive care within a medical home in Maine.

PubMed

Tippy, Kathy; Meyer, Katie; Aronson, Richard; Wall, Toni

2005-06-01

Access to coordinated, ongoing comprehensive care in a medical home (CCMH) is a national health objective and a federal performance measure. The National Survey of Children With Special Health Care Needs (National Survey of CSHCN) provides state level data on this Maternal Child Health Bureau performance measure. In Maine, only 60% of CSHCN received CCMH in 2001. Here we described characteristics of receiving comprehensive care in a medical home for CSHCN, in Maine. Data from the National Survey of CSHCN were used for the analysis. We examined associations between receiving CCMH and demographic factors, severity of a condition or problem, and having adequate insurance coverage for services in univariate and multivariate logistic regression models. The distribution of children who received CCMH did not differ across gender, race, age, or poverty level. Children with adequate insurance were more likely to have received this care than those without adequate insurance and those with a more severe condition or problem were less likely to receive CCMH. We found that receiving CCMH was positively related to adequate insurance, independent of poverty. We also found that CSHCN with more severe conditions have more unmet needs than those with less severe conditions. CSHCN programs, which have a responsibility to assure that CSHCN receive CCMH, must work to maximize insurance coverage. Programs can also work to raise awareness among providers of the complexity of CCMH and the role it plays in maximizing the health of the child and family.

F-5-L Boat Seaplane : performance characteristics

NASA Technical Reports Server (NTRS)

Diehl, W S

1922-01-01

Performance characteristics for the F-5-L Boat Seaplane are given. Characteristic curves for the RAF-6 airfoil and the F-5-L wings, parasite resistance and velocity data, engine and propeller characteristics, effective and maximum horsepower, and cruising performance are discussed.

Dielectric characterization of high-performance spaceflight materials

NASA Astrophysics Data System (ADS)

Kleppe, Nathan Alan

As commercial space travel increases, the need for reliable structural health monitoring to predict possible weaknesses or failures of structural materials also increases. Monitoring of polymer-based materials may be achieved through the use of dielectric spectroscopy by comparing permittivity or conductivity measurements performed on a sample in use to that of a pristine sample. Changes in these measured values or of the relaxation frequencies, if present, can indicate chemical or physical changes occurring within the material and the possible need for maintenance/replacement. In this work, we established indicative trends that occur in the dielectric spectra during accelerated aging of various high-performance polymeric materials (EVOH, PEEK, PPS, and UHMWPE). Uses for these materials range from electrical insulation and protective coatings to windows and air- or space-craft parts that may be subject to environmental damage over long-term operation. Accelerated thermal aging and ultraviolet/water-spray cyclic aging were performed in order to investigate the degradation of the aforementioned material. The Havriliak-Negami model was used in the analysis of the measured dielectric spectra in order to obtain the characteristic fit parameters from which aging-related trends were identified. With reference to the literature and from measured FTIR spectra, observations were connected to the underlying mechanisms causing the dielectric relaxations.

Calculations to support JET neutron yield calibration: Modelling of neutron emission from a compact DT neutron generator

NASA Astrophysics Data System (ADS)

Čufar, Aljaž; Batistoni, Paola; Conroy, Sean; Ghani, Zamir; Lengar, Igor; Milocco, Alberto; Packer, Lee; Pillon, Mario; Popovichev, Sergey; Snoj, Luka; JET Contributors

2017-03-01

At the Joint European Torus (JET) the ex-vessel fission chambers and in-vessel activation detectors are used as the neutron production rate and neutron yield monitors respectively. In order to ensure that these detectors produce accurate measurements they need to be experimentally calibrated. A new calibration of neutron detectors to 14 MeV neutrons, resulting from deuterium-tritium (DT) plasmas, is planned at JET using a compact accelerator based neutron generator (NG) in which a D/T beam impinges on a solid target containing T/D, producing neutrons by DT fusion reactions. This paper presents the analysis that was performed to model the neutron source characteristics in terms of energy spectrum, angle-energy distribution and the effect of the neutron generator geometry. Different codes capable of simulating the accelerator based DT neutron sources are compared and sensitivities to uncertainties in the generator's internal structure analysed. The analysis was performed to support preparation to the experimental measurements performed to characterize the NG as a calibration source. Further extensive neutronics analyses, performed with this model of the NG, will be needed to support the neutron calibration experiments and take into account various differences between the calibration experiment and experiments using the plasma as a source of neutrons.

Macroergonomic analysis and design for improved safety and quality performance.

PubMed

Kleiner, B M

1999-01-01

Macroergonomics, which emerged historically after sociotechnical systems theory, quality management, and ergonomics, is presented as the basis for a needed integrative methodology. A macroergonomics methodology was presented in some detail to demonstrate how aspects of microergonomics, total quality management (TQM), and sociotechnical systems (STS) can be triangulated in a common approach. In the context of this methodology, quality and safety were presented as 2 of several important performance criteria. To demonstrate aspects of the methodology, 2 case studies were summarized with safety and quality performance results where available. The first case manipulated both personnel and technical factors to achieve a "safety culture" at a nuclear site. The concept of safety culture is defined in INSAG-4 (International Atomic Energy Agency, 1991). as "that assembly of characteristics and attitudes in organizations and individuals which establishes that, as an overriding priority, nuclear plant safety issues receive the attention warranted by their significance." The second case described a tire manufacturing intervention to improve quality (as defined by Sink and Tuttle, 1989) through joint consideration of technical and social factors. It was suggested that macroergonomics can yield greater performance than can be achieved through ergonomic intervention alone. Whereas case studies help to make the case, more rigorous formative and summative research is needed to refine and validate the proposed methodology respectively.

Estimating workforce development needs for high-speed rail in California : [research brief].

DOT National Transportation Integrated Search

2012-03-01

It is critical to understand the emergent workforce characteristics for the California High-Speed Rail (HSR) network. Knowledge about the size and characteristics of this workforce, including its training and education needs, is required to guide the...

Sediment delivery modeling in practice: Comparing the effects of watershed characteristics and data resolution across hydroclimatic regions.

PubMed

Hamel, Perrine; Falinski, Kim; Sharp, Richard; Auerbach, Daniel A; Sánchez-Canales, María; Dennedy-Frank, P James

2017-02-15

Geospatial models are commonly used to quantify sediment contributions at the watershed scale. However, the sensitivity of these models to variation in hydrological and geomorphological features, in particular to land use and topography data, remains uncertain. Here, we assessed the performance of one such model, the InVEST sediment delivery model, for six sites comprising a total of 28 watersheds varying in area (6-13,500km 2 ), climate (tropical, subtropical, mediterranean), topography, and land use/land cover. For each site, we compared uncalibrated and calibrated model predictions with observations and alternative models. We then performed correlation analyses between model outputs and watershed characteristics, followed by sensitivity analyses on the digital elevation model (DEM) resolution. Model performance varied across sites (overall r 2 =0.47), but estimates of the magnitude of specific sediment export were as or more accurate than global models. We found significant correlations between metrics of sediment delivery and watershed characteristics, including erosivity, suggesting that empirical relationships may ultimately be developed for ungauged watersheds. Model sensitivity to DEM resolution varied across and within sites, but did not correlate with other observed watershed variables. These results were corroborated by sensitivity analyses performed on synthetic watersheds ranging in mean slope and DEM resolution. Our study provides modelers using InVEST or similar geospatial sediment models with practical insights into model behavior and structural uncertainty: first, comparison of model predictions across regions is possible when environmental conditions differ significantly; second, local knowledge on the sediment budget is needed for calibration; and third, model outputs often show significant sensitivity to DEM resolution. Copyright © 2016 Elsevier B.V. All rights reserved.

Exhaust emissions reduction from diesel engine using combined Annona-Eucalyptus oil blends and antioxidant additive

NASA Astrophysics Data System (ADS)

Senthil, R.; Silambarasan, R.; Pranesh, G.

2017-03-01

The limited resources, rising petroleum prices and depletion of fossil fuel have now become a matter of great concern. Hence, there is an urgent need for researchers to find some alternate fuels which are capable of substituting partly or wholly the higher demanded conventional diesel fuel. Lot of research work has been conducted on diesel engine using biodiesel and its blends with diesel as an alternate fuel. Very few works have been done with combination of biodiesel-Eucalypts oil without neat diesel and this leads to lots of scope in this area. The aim of the present study is to analyze the performance and emission characteristics of a single cylinder, direct injection, compression ignition engine using eucalyptus oil-biodiesel as fuel. The presence of eucalyptus oil in the blend reduces the viscosity and improves the volatility of the blends. The methyl ester of Annona oil is blended with eucalypts oil in 10, 20, 30, 40 and 50 %. The performance and emission characteristics are evaluated by operating the engine at different loads. The performance characteristics such as brake thermal efficiency, brake specific fuel consumption and exhaust gas temperature are evaluated. The emission constituents measured are Carbon monoxide (CO), unburned hydrocarbons (HC), Oxides of nitrogen (NOx) and Smoke. It is found that A50-Eu50 (50 Annona + 50 % Eucalyptus oil) blend showed better performance and reduction in exhaust emissions. But, it showed a very marginal increase in NOx emission when compared to that of diesel. Therefore, in order to reduce the NOx emission, antioxidant additive (A-tocopherol acetate) is mixed with Annona-Eucalyptus oil blends in various proportions by which NOx emission is reduced. Hence, A50-Eu50 blend can be used as an alternate fuel for diesel engine without any modifications.

CFD based draft tube hydraulic design optimization

NASA Astrophysics Data System (ADS)

McNabb, J.; Devals, C.; Kyriacou, S. A.; Murry, N.; Mullins, B. F.

2014-03-01

The draft tube design of a hydraulic turbine, particularly in low to medium head applications, plays an important role in determining the efficiency and power characteristics of the overall machine, since an important proportion of the available energy, being in kinetic form leaving the runner, needs to be recovered by the draft tube into static head. For large units, these efficiency and power characteristics can equate to large sums of money when considering the anticipated selling price of the energy produced over the machine's life-cycle. This same draft tube design is also a key factor in determining the overall civil costs of the powerhouse, primarily in excavation and concreting, which can amount to similar orders of magnitude as the price of the energy produced. Therefore, there is a need to find the optimum compromise between these two conflicting requirements. In this paper, an elaborate approach is described for dealing with this optimization problem. First, the draft tube's detailed geometry is defined as a function of a comprehensive set of design parameters (about 20 of which a subset is allowed to vary during the optimization process) and are then used in a non-uniform rational B-spline based geometric modeller to fully define the wetted surfaces geometry. Since the performance of the draft tube is largely governed by 3D viscous effects, such as boundary layer separation from the walls and swirling flow characteristics, which in turn governs the portion of the available kinetic energy which will be converted into pressure, a full 3D meshing and Navier-Stokes analysis is performed for each design. What makes this even more challenging is the fact that the inlet velocity distribution to the draft tube is governed by the runner at each of the various operating conditions that are of interest for the exploitation of the powerhouse. In order to determine these inlet conditions, a combined steady-state runner and an initial draft tube analysis, using a stage interface between them, must first be performed for each operating condition. Due to the computationally intensive nature of the evaluation process, the efficiency of the optimization algorithm becomes important. Therefore, a state-of-the-art hierarchical-metamodel-assisted evolutionary algorithm is used.

Seedling performance covaries with dormancy thresholds: maintaining cryptic seed heteromorphism in a fire-prone system.

PubMed

Liyanage, Ganesha S; Ayre, David J; Ooi, Mark K J

2016-11-01

The production of morphologically different seeds or fruits by the same individual plant is known as seed heteromorphism. Such variation is expected to be selected for in disturbance-prone environments to allow germination into inherently variable regeneration niches. However, there are few demonstrations that heteromorphic seed characteristics should be favored by selection or how they may be maintained. In fire-prone ecosystems, seed heteromorphism is found in the temperatures needed to break physical dormancy, with seeds responding to high or low temperatures, ensuring emergence under variable fire-regime-related soil heating. Because of the relationship between dormancy-breaking temperature thresholds and fire severity, we hypothesize that different post-fire resource conditions have selected for covarying seedling traits, which contribute to maintenance of such heteromorphism. Seeds with low thresholds emerge into competitive conditions, either after low-severity fire or in vegetation gaps, and are therefore likely to experience selection for seedling characteristics that make them good competitors. On the other hand, high-temperature-threshold seeds would emerge into less competitive environments, indicative of stand-clearing high-severity fires, and would not experience the same selective forces. We identified high and low-threshold seed morphs via dormancy-breaking heat treatments and germination trials for two study species and compared seed mass and other morphological characteristics between morphs. We then grew seedlings from the two different morphs, with and without competition, and measured growth and biomass allocation as indicators of seedling performance. Seedlings from low-threshold seeds of both species performed better than their high-threshold counterparts, growing more quickly under competitive conditions, confirming that different performance can result from this seed characteristic. Seed mass or appearance did not differ between morphs, indicating that dormancy-breaking temperature threshold variation is a form of cryptic heteromorphism. The potential shown for the selective influence of different post-fire environmental conditions on seedling performance provides evidence of a mechanism for the maintenance of heteromorphic variation in dormancy-breaking temperature thresholds. © 2016 The Authors. Ecology, published by Wiley Periodicals, Inc., on behalf of the Ecological Society of America.

Clinical nutrition and foodservice personnel in teaching hospitals have different perceptions of total quality management performance.

PubMed

Chong, Y; Unklesbay, N; Dowdy, R

2000-09-01

To investigate the perceived total quality management (TQM) performance of their department by clinical nutrition managers and dietitians, and foodservice managers and supervisors, in hospital food and nutrition service departments. Using a 2-part questionnaire containing items about 3 constructs of TQM performance and demographic characteristics, participants rated their perceptions of TQM performance. Employees in 7 Council of Teaching Hospitals. Of the 128 possible respondents, 73 (57%) completed the study. Correlation analysis to identify relationships between demographic characteristics and TQM performance. Analysis of variance to investigate statistical differences among hospitals and between subject groups and types of employment positions. Three TQM constructs--organization, information, and quality management--were evaluated. The clinical nutrition manager and dietitian group had mean ratings between 3.1 and 4.7 (5-point Likert scale); the foodservice manager and supervisor group had mean ratings from 2.7 to 4.0. Education level was significantly correlated (r = 0.44) to performance of employee training in the clinical nutrition group. The number of employees directly supervised was negatively correlated (r = -0.21) to the performance of employee training in the foodservice group. As the dynamic roles of dietitians change, many dietitians will occupy management positions in organizations such as restaurants, health food stores, food processing/distribution companies, and schools. This study demonstrates how a TQM survey instrument could be applied to clinical nutrition and foodservice settings. Dietitians will need to assess TQM in their workplace facilities, especially because of the direct links of TQM to productivity and client satisfaction.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hoegg, Edward D.; Barinaga, Charles J.; Hager, George J.

ABSTRACT In order to meet a growing need for fieldable mass spectrometer systems for precise elemental and isotopic analyses, the liquid sampling-atmospheric pressure glow discharge (LS-APGD) has a number of very promising characteristics. One key set of attributes that await validation deals with the performance characteristics relative to isotope ratio precision and accuracy. Due to its availability and prior experience with this research team, the initial evaluation of isotope ratio (IR) performance was performed on a Thermo Scientific Exactive Orbitrap instrument. While the mass accuracy and resolution performance for orbitrap analyzers are very well documented, no detailed evaluations of themore » IR performance have been published. Efforts described here involve two variables: the inherent IR precision and accuracy delivered by the LSAPGD microplasma and the inherent IR measurement qualities of orbitrap analyzers. Important to the IR performance, the various operating parameters of the orbitrap sampling interface, HCD dissociation stage, and ion injection/data acquisition have been evaluated. The IR performance for a range of other elements, including natural, depleted, and enriched uranium isotopes was determined. In all cases the precision and accuracy are degraded when measuring low abundance (<0.1% isotope fractions). In the best case, IR precision on the order of 0.1 %RSD can be achieved, with values of 1-3 %RSD observed for low-abundance species. The results suggest that the LSAPGD is a very good candidate for field deployable MS analysis and that the high resolving powers of the orbitrap may be complemented with a here-to-fore unknown capacity to deliver high-precision isotope ratios.« less

Fabrication, characterization, and irradiation of an austenitic oxide dispersion strengthened steel suited for next generation nuclear applications

NASA Astrophysics Data System (ADS)

Brooks, Adam J.

As nuclear energy systems become more advanced, the materials encompassing them need to perform at higher temperatures for longer periods of time. In this Master's thesis we experiment with an oxide dispersion strengthened (ODS) austenitic steel that has been recently developed. ODS materials have a small concentration of nano oxide particles dispersed in their matrix, and typically have higher strength and better extreme temperature creep resistance characteristics than ordinary steels. However, no ODS materials have ever been installed in a commercial power reactor to date. Being a newer research material, there are many unanswered phenomena that need to be addressed regarding the performance under irradiation. Furthermore, due to the ODS material traditionally needing to follow a powder metallurgy fabrication route, there are many processing parameters that need to be optimized before achieving a nuclear grade material specification. In this Master's thesis we explore the development of a novel ODS processing technology conducted in Beijing, China, to produce solutionized bulk ODS samples with 97% theoretical density. This is done using relatively low temperatures and ultra high pressure (UHP) equipment, to compact the mechanically alloyed (MA) steel powder into bulk samples without any thermal phase change influence or oxide precipitation. By having solutionized bulk ODS samples, transmission electron microscopy (TEM) observation of nano oxide precipitation within the steel material can be studied by applying post heat treatments. These types of samples will be very useful to the science and engineering community, to answer questions regarding material powder compacting, oxide synthesis, and performance. Subsequent analysis performed at Queen's University included X-ray diffraction (XRD) and inductively coupled plasma optical emission spectrometry (ICP-OES). Additional TEM in-situ 1MeV Kr2+ irradiation experiments coupled with energy dispersive X-ray (EDX) techniques, were also performed on large (200nm+) non-stoichiometric oxides embedded within the austenite steel grains, in an attempt to quantify the elemental compositional changes during high temperature (520°C) heavy ion irradiation.

Predictors of unmet dental need in children with autism spectrum disorder: results from a national sample.

PubMed

McKinney, Christy M; Nelson, Travis; Scott, JoAnna M; Heaton, Lisa J; Vaughn, Matthew G; Lewis, Charlotte W

2014-01-01

Unmet dental need in children with autism spectrum disorder (ASD) is common. We tested hypotheses that lacking a medical home or having characteristics of more severe ASD is positively associated with having unmet dental need among children with ASD. Using data from the 2009 to 2010 National Survey of Children with Special Health Care Needs, we analyzed 2772 children 5 to 17 years old with ASD. We theorized that unmet dental need would be positively associated with not having a medical home and having characteristics of more severe ASD (eg, parent reported severe ASD, an intellectual disability, communication, or behavior difficulties). Prevalence of unmet dental need was estimated, and unadjusted and adjusted odds ratios, 95% confidence intervals, and P values were computed using survey methods for logistic regression. Nationally, 15.1% of children with ASD had unmet dental need. Among children with ASD, those without a medical home were more apt to have unmet dental need than those with a medical home (adjusted odds ratio, 4.46; 95% confidence interval, 2.59-7.69). Children with ASD with intellectual disability or greater communication or behavioral difficulties had greater odds of unmet dental need than those with ASD without these characteristics. Parent-reported ASD severity was not associated with unmet dental need. Children with ASD without a medical home and with characteristics suggestive of increased ASD-related difficulties were more apt to have unmet dental need. Pediatricians might use these findings to aid in identifying children with ASD who might not receive all needed dental care. Copyright © 2014 Academic Pediatric Association. Published by Elsevier Inc. All rights reserved.

Behavior and Performance on Long-Duration Spaceflights: Evidence from Analogue Environments

NASA Technical Reports Server (NTRS)

Palinkas, Lawrence A.; Gunderson, E. K. Eric; Johnson, Jeffrey C.; Holland, Albert W.

1999-01-01

Analyses of data collected in Antarctica since 1963 were conducted to identify features of behavior and performance likely to occur during long-duration missions in space.The influence of mission duration and station latitude on POMS mood scores was examined in 450 American men and women who overwintered in Antarctica between 1991 and 1998. The influence of crewmember social characteristics, personality traits, interpersonal needs, and station environments on measures of behavior and performance at the end of the austral winter was examined in 657 American men who overwintered between 1963 and 1974. Both data sets were used to examine the influence of crew social structure on individual performance. Results: Seasonal variations in mood appear to be associated with the altered diurnal cycle and psychological segmentation of the mission. Concurrent measures of personality, interpersonal needs, and coping styles are better predictors of depressed mood and peer-supervisor performance evaluations than baseline measures because of the unique features of the station social and physical environments and the absence of resources typically used to cope with stress elsewhere. Individuals in crews with a clique structure report significantly more depression, anxiety, anger, fatigue and confusion than individuals in crews with a core-periphery structure. Depressed mood is inversely associated with severity of station physical environment, supporting the existence of a positive or "salutogenic" effect for individuals seeking challenging experiences in extreme environments.

Nondestructive Techniques to Evaluate the Characteristics and Development of Engineered Cartilage

PubMed Central

Mansour, Joseph M.; Lee, Zhenghong; Welter, Jean F.

2016-01-01

In this review, methods for evaluating the properties of tissue engineered (TE) cartilage are described. Many of these have been developed for evaluating properties of native and osteoarthritic articular cartilage. However, with the increasing interest in engineering cartilage, specialized methods are needed for nondestructive evaluation of tissue while it is developing and after it is implanted. Such methods are needed, in part, due to the large inter- and intra-donor variability in the performance of the cellular component of the tissue, which remains a barrier to delivering reliable TE cartilage for implantation. Using conventional destructive tests, such variability makes it near-impossible to predict the timing and outcome of the tissue engineering process at the level of a specific piece of engineered tissue and also makes it difficult to assess the impact of changing tissue engineering regimens. While it is clear that the true test of engineered cartilage is its performance after it is implanted, correlation of pre and post implantation properties determined non-destructively in vitro and/or in vivo with performance should lead to predictive methods to improve quality-control and to minimize the chances of implanting inferior tissue. PMID:26817458

Impact of personality characteristics on patient satisfaction after multifocal intraocular lens implantation: results from the "happy patient study".

PubMed

Mester, Ulrich; Vaterrodt, Thomas; Goes, Frank; Huetz, Werner; Neuhann, Irmingard; Schmickler, Stefanie; Szurman, Peter; Gekeler, Katrin

2014-10-01

This prospective multicenter study assessed personality characteristics that may influence patient satisfaction after implantation of multifocal intraocular lenses (MIOLs). One hundred eighty-three patients who underwent bilateral implantation of different MIOLs were enrolled. Uncorrected and corrected distance visual acuity for distance and near (ie, UDVA, UNVA, CDVA, and CNVA) were assessed preoperatively and 3 and 6 months after implantation. Before surgery, personality characteristics were evaluated using a questionnaire based on the NEO Personality Inventory Test and the Compulsiveness Inventory Test. At the 3- and 6-month postoperative visits, patients answered a questionnaire concerning overall satisfaction, need for spectacles at different distances, visual function at different distances and lighting conditions, photic phenomena, and ease of performing daily activities. Three months after surgery (n = 163), mean CDVA was 0.03 ± 0.09 logMAR, UDVA was 0.05 ± 0.09 logMAR, and UNVA was 0.04 ± 0.11 logMAR. At the 6-month visit (n = 131), mean CDVA was 0.02 ± 0.07 logMAR, UDVA was 0.06 ± 0.09 logMAR, and UNVA was 0.05 ± 0.01 logMAR. Most patients (82.2%) would opt for an MIOL again, 3.7% would not, and 14.1% were uncertain. Overall satisfaction with the procedure was correlated to low astigmatism, good visual function, low spectacle dependence, and less halos or glare. The personality characteristics of compulsive checking, orderliness, competence, and dutifulness were statistically significantly correlated to subjective disturbance by glare and halos. Postoperative patient satisfaction after MIOL implantation is correlated to visual performance, spectacle independence, and less photic phenomena. Personality characteristics have an impact on subjective disturbance by photic phenomena and thus are important for patient satisfaction. Copyright 2014, SLACK Incorporated.

Pay for performance of Estonian family doctors and impact of different practice- and patient-related characteristics on a good outcome: A quantitative assessment.

PubMed

Merilind, Eero; Salupere, Rauno; Västra, Katrin; Kalda, Ruth

2016-01-01

Several practice- and patient-related characteristics are reported to have an influence on a good quality outcome. Estonia started the pay-for-performance (P4P) system for family doctors (FDs) in 2006. Every year the number of FDs participating in P4P has increased, but only half of the FDs achieved good outcome. The aim of this study was to find out which practice- and patient-related characteristics could have an impact on a good outcome. The study was conducted using the database from the Estonian Health Insurance Fund. All working FDs were divided into two groups (with "good" and "poor" outcomes) according their achievements in P4P. We chose characteristics which described structure (practice list size, number of doctors, composition of FDs list: age, number of chronically ill patients) during the observation period 2006-2012. During the observation period 2006-2012, the number of FDs with a good outcome in P4P increased from 6% (2006) to 53% (2012). The high number of FDs in primary care teams, longer experience of participation in P4P and the smaller number of patients on FDs' lists all have an impact on a good outcome. The number of chronically ill patients in FDs lists has no significant effect on an outcome, but P4P increases the number of disease-diagnosed patients. Different practice and patient-related characteristics have an impact on a good outcome. As workload increases, smaller lists of FDs patients or increased staff levels are needed in order to maintain a good outcome. Copyright © 2016 The Lithuanian University of Health Sciences. Production and hosting by Elsevier Urban & Partner Sp. z o.o. All rights reserved.

Importance-Performance Matrix Analysis (IPMA) Of Transport Disadvantage Variables on Social Exclusion in a Rural Context

NASA Astrophysics Data System (ADS)

Larasati, Ophilia; Puspita Dirgahayani, Eng., Dr.

2018-05-01

Transport services are essential to support daily life. A lack of transport supply leads to the existence of transport disadvantaged (TDA) groups who are vulnerable to social exclusion, which happens when a particular group or individual is having difficulties to access certain activities that are considered normal in society. To tackle this phenomenon, the understanding of the influence of TDA variables on social exclusion is needed. The aim of this study is to analyze the influences of TDA variables on social exclusion in a rural context, with Cibeureum Village (Bandung Barat Regency) and Bunikasih Village (Subang Regency) as the study case. Both case studies provide different characteristics of accessibility. Partial Least Squares (PLS) Structural Equation Modeling (SEM) is chosen as the method to analyze the influences of TDA variables on social exclusion. The PLS-SEM model is developed according to the social exclusion variable and four TDA variables, i.e., accessibility, individual characteristics, private vehicle existence, and travel behavior. IPMA is done after the PLS-SEM model is evaluated. The study reveals that among four of the TDA variables, accessibility has the most influence on social exclusion, hence interventions related to improving accessibility are needed to tackle social exclusion. More specifically, the provision of alternative modes is needed in both study areas, while in Bunikasih Village the cost of travel is also an important variable to consider.

A core handling device for the Mars Sample Return Mission

NASA Technical Reports Server (NTRS)

Gwynne, Owen

1989-01-01

A core handling device for use on Mars is being designed. To provide a context for the design study, it was assumed that a Mars Rover/Sample Return (MRSR) Mission would have the following characteristics: a year or more in length; visits by the rover to 50 or more sites; 100 or more meter-long cores being drilled by the rover; and the capability of returning about 5 kg of Mars regolith to Earth. These characteristics lead to the belief that in order to bring back a variegated set of samples that can address the range of scientific objetives for a MRSR mission to Mars there needs to be considerable analysis done on board the rover. Furthermore, the discrepancy between the amount of sample gathered and the amount to be returned suggests that there needs to be some method of choosing the optimal set of samples. This type of analysis will require pristine material-unaltered by the drilling process. Since the core drill thermally and mechanically alters the outer diameter (about 10 pct) of the core sample, this outer area cannot be used. The primary function of the core handling device is to extract subsamples from the core and to position these subsamples, and the core itself if needed, with respect to the various analytical instruments that can be used to perform these analyses.

Long-Term Soft Denture Lining Materials

PubMed Central

Chladek, Grzegorz; Żmudzki, Jarosław; Kasperski, Jacek

2014-01-01

Long-term soft denture lining (LTSDL) materials are used to alleviate the trauma associated with wearing complete dentures. Despite their established clinical efficacy, the use of LTSDLs has been limited due to the unfavorable effects of the oral environment on some of their mechanical and performance characteristics. The unresolved issue of LTSDL colonization by Candida albicans is particularly problematic. Silicone-based LTSDL (SLTSDL) materials, which are characterized by more stable hardness, sorption and solubility than acrylic-based LTSDLs (ALTSDLs), are currently the most commonly used LTSDLs. However, SLTSDLs are more prone to debonding from the denture base. Moreover, due to their limitations, the available methods for determining bond strength do not fully reflect the actual stability of these materials under clinical conditions. SLTSDL materials exhibit favorable viscoelastic properties compared with ALTSDLs. Furthermore, all of the lining materials exhibit an aging solution-specific tendency toward discoloration, and the available cleansers are not fully effective and can alter the mechanical properties of LTSDLs. Future studies are needed to improve the microbiological resistance of LTSDLs, as well as some of their performance characteristics. PMID:28788163

Research on digital system design of nuclear power valve

NASA Astrophysics Data System (ADS)

Zhang, Xiaolong; Li, Yuan; Wang, Tao; Dai, Ye

2018-04-01

With the progress of China's nuclear power industry, nuclear power plant valve products is in a period of rapid development, high performance, low cost, short cycle of design requirements for nuclear power valve is proposed, so there is an urgent need for advanced digital design method and integrated design platform to provide technical support. Especially in the background of the nuclear power plant leakage in Japan, it is more practical to improve the design capability and product performance of the nuclear power valve. The finite element numerical analysis is a common and effective method for the development of nuclear power valves. Nuclear power valve has high safety, complexity of valve chamber and nonlinearity of seal joint surface. Therefore, it is urgent to establish accurate prediction models for earthquake prediction and seal failure to meet engineering accuracy and calculation conditions. In this paper, a general method of finite element modeling for nuclear power valve assembly and key components is presented, aiming at revealing the characteristics and rules of finite element modeling of nuclear power valves, and putting forward aprecision control strategy for finite element models for nuclear power valve characteristics analysis.

Development of response models for the Earth Radiation Budget Experiment (ERBE) sensors. Part 1: Dynamic models and computer simulations for the ERBE nonscanner, scanner and solar monitor sensors

NASA Technical Reports Server (NTRS)

Halyo, Nesim; Choi, Sang H.; Chrisman, Dan A., Jr.; Samms, Richard W.

1987-01-01

Dynamic models and computer simulations were developed for the radiometric sensors utilized in the Earth Radiation Budget Experiment (ERBE). The models were developed to understand performance, improve measurement accuracy by updating model parameters and provide the constants needed for the count conversion algorithms. Model simulations were compared with the sensor's actual responses demonstrated in the ground and inflight calibrations. The models consider thermal and radiative exchange effects, surface specularity, spectral dependence of a filter, radiative interactions among an enclosure's nodes, partial specular and diffuse enclosure surface characteristics and steady-state and transient sensor responses. Relatively few sensor nodes were chosen for the models since there is an accuracy tradeoff between increasing the number of nodes and approximating parameters such as the sensor's size, material properties, geometry, and enclosure surface characteristics. Given that the temperature gradients within a node and between nodes are small enough, approximating with only a few nodes does not jeopardize the accuracy required to perform the parameter estimates and error analyses.

Evaluation of Subsequent Heat Treatment Routes for Near-β Forged TA15 Ti-Alloy

PubMed Central

Sun, Zhichao; Wu, Huili; Yang, He

2016-01-01

TA15 Ti-alloy is widely used to form key load-bearing components in the aerospace field, where excellent service performance is needed. Near-β forging technology provides an attractive way to form these complicated Ti-alloy components but subsequent heat treatment has a great impact on the final microstructure and mechanical properties. Therefore evaluation and determination of the heat treatment route is of particular significance. In this paper, for the near-β forged TA15 alloy, the formation and evolution of microstructures under different subsequent heat treatment routes (annealing, solution and aging, toughening and strengthening) were studied and the cooling mode after forging was also considered. Then, the type and characteristics of the obtained microstructures were discussed through quantitative metallographic analysis. The corresponding mechanical properties (tensile, impact toughness, and fracture toughness) and effects of microstructural characteristics were investigated. Finally, for a required microstructure and performance a reasonable heat treatment route was recommended. The work is of importance for the application and development of near-β forging technology. PMID:28773994

A numerical study on the thermal initiation of a confined explosive in 2-D geometry.

PubMed

Aydemir, Erdoğan; Ulas, Abdullah

2011-02-15

Insensitive munitions design against thermal stimuli like slow or fast cook-off has become a significant requirement for today's munitions. In order to achieve insensitive munitions characteristics, the response of the energetic material needs to be predicted against heating stimuli. In this study, a 2D numerical code was developed to simulate the slow and fast cook-off heating conditions of confined munitions and to obtain the response of the energetic materials. Computations were performed in order to predict the transient temperature distribution, the ignition time, and the location of ignition in the munitions. These predictions enable the designers to have an idea of when and at which location the energetic material ignites under certain adverse surrounding conditions. In the paper, the development of the code is explained and the numerical results are compared with available experimental and numerical data in the literature. Additionally, a parametric study was performed showing the effect of dimensional scaling of munitions and the heating rate on the ignition characteristics. Copyright © 2010 Elsevier B.V. All rights reserved.

A Comparative thermophysiological study in sport bras for running

NASA Astrophysics Data System (ADS)

Carneiro, L. P.; Miranda, T. M. R.; Catarino, A.

2017-10-01

Comfort in clothing is essential for user’s performance and is considered as a quality factor when choosing a particular piece of garment. Sportswear’s need include comfort and functionality, meaning that the thermo-physiological properties are of extreme importance. The aim of this work consists in comparing six different models of sports bra used specifically for running, taking into consideration the aspects of the thermo-physiological properties, air permeability, moisture behaviour, and friction. This paper is part of an ongoing research aiming to establish a comprehension about function and comfort characteristics for sport bras and propose a new bra with improved characteristics both in ergonomics design as well as in comfort performance. The thermal characterization of different regions on each bra were tested using Alambeta apparatus, Textest FX 3300 for air permeability and Frictorq for friction. Evaporation tests were also carried out in different regions on each bra at 37ºC corresponding to internal temperature of the human body. The results show that raw material, structures and construction can have influence in the properties studied.

The Antiaircraft Journal. Volume 96, Number 6, November-December 1953

DTIC Science & Technology

1953-12-01

characteristics needed in a guided missile are range, accuracy, and damage potential. To be tacti- cally useful, other requirements are: speed...the characteristics of thrust and size needed. The solid rocket is quite simple in principle. It consists of a chamber in which the propellants burn at...and characteristics of his weapons. Because of the length of front encom- passed by the SP platoon, coordination difficulties are constantly arising

Air Force Training: Further Analysis and Planning Needed to Improve Effectiveness

DTIC Science & Technology

2016-09-01

training, and (3) established virtual training plans that include desirable characteristics of a comprehensive strategy. GAO reviewed Air Force training...requirements may not reflect current and emerging training needs, because the Air Force has not comprehensively reassessed the assumptions underlying them...include all desirable characteristics of a comprehensive strategy, such as a risk-based investment strategy or a time line for addressing training needs

Exploring performance obstacles of intensive care nurses.

PubMed

Gurses, Ayse P; Carayon, Pascale

2009-05-01

High nursing workload, poor patient safety, and poor nursing quality of working life (QWL) are major issues in intensive care units (ICUs). Characteristics of the ICU and performance obstacles may contribute to these issues. The goal of this study was to comprehensively identify the performance obstacles perceived by ICU nurses. We used a qualitative research design and conducted semi-structured interviews with 15 ICU nurses of a medical-surgical ICU. Based on this qualitative study and a previously reported quantitative study, we identified seven main types of performance obstacles experienced by ICU nurses. Obstacles related to the physical environment (e.g., noise, amount of space), family relations (e.g., distractions caused by family, lack of time to spend with family), and equipment (e.g., unavailability, misplacement) were the most frequently experienced performance obstacles. The qualitative interview data provided rich information regarding the factors contributing to the performance obstacles. Overall, ICU nurses experience a variety of performance obstacles in their work on a daily basis. Future research is needed to understand the impact of performance obstacles on nursing workload, nursing QWL, and quality and safety of care.

Novel surgical performance evaluation approximates Standardized Incidence Ratio with high accuracy at simple means.

PubMed

Gabbay, Itay E; Gabbay, Uri

2013-01-01

Excess adverse events may be attributable to poor surgical performance but also to case-mix, which is controlled through the Standardized Incidence Ratio (SIR). SIR calculations can be complicated, resource consuming, and unfeasible in some settings. This article suggests a novel method for SIR approximation. In order to evaluate a potential SIR surrogate measure we predefined acceptance criteria. We developed a new measure - Approximate Risk Index (ARI). "Number Needed for Event" (NNE) is the theoretical number of patients needed "to produce" one adverse event. ARI is defined as the quotient of the group of patients needed for no observed events Ge by total patients treated Ga. Our evaluation compared 2500 surgical units and over 3 million heterogeneous risk surgical patients that were induced through a computerized simulation. Surgical unit's data were computed for SIR and ARI to evaluate compliance with the predefined criteria. Approximation was evaluated by correlation analysis and performance prediction capability by Receiver Operating Characteristics (ROC) analysis. ARI strongly correlates with SIR (r(2) = 0.87, p < 0.05). ARI prediction of excessive risk revealed excellent ROC (Area Under the Curve > 0.9) 87% sensitivity and 91% specificity. ARI provides good approximation of SIR and excellent prediction capability. ARI is simple and cost-effective as it requires thorough risk evaluation of only the adverse events patients. ARI can provide a crucial screening and performance evaluation quality control tool. The ARI method may suit other clinical and epidemiological settings where relatively small fraction of the entire population is affected. Copyright © 2013 Surgical Associates Ltd. Published by Elsevier Ltd. All rights reserved.

The influence of system quality characteristics on health care providers' performance: Empirical evidence from Malaysia.

PubMed

Mohd Salleh, Mohd Idzwan; Zakaria, Nasriah; Abdullah, Rosni

The Ministry of Health Malaysia initiated the total hospital information system (THIS) as the first national electronic health record system for use in selected public hospitals across the country. Since its implementation 15 years ago, there has been the critical requirement for a systematic evaluation to assess its effectiveness in coping with the current system, task complexity, and rapid technological changes. The study aims to assess system quality factors to predict the performance of electronic health in a single public hospital in Malaysia. Non-probability sampling was employed for data collection among selected providers in a single hospital for two months. Data cleaning and bias checking were performed before final analysis in partial least squares-structural equation modeling. Convergent and discriminant validity assessments were satisfied the required criterions in the reflective measurement model. The structural model output revealed that the proposed adequate infrastructure, system interoperability, security control, and system compatibility were the significant predictors, where system compatibility became the most critical characteristic to influence an individual health care provider's performance. The previous DeLone and McLean information system success models should be extended to incorporate these technological factors in the medical system research domain to examine the effectiveness of modern electronic health record systems. In this study, care providers' performance was expected when the system usage fits with patients' needs that eventually increased their productivity. Copyright © 2016 King Saud Bin Abdulaziz University for Health Sciences. Published by Elsevier Ltd. All rights reserved.

Employment Decisions Made by Mothers of Infants.

ERIC Educational Resources Information Center

Hock, Ellen; And Others

1985-01-01

Assessed how individual characteristics and perceptions of infant needs are associated with decisions about employment. Comparisons and findings about decisions to work or stay home are interpreted in light of maternal demographic and personality attributes and maternal perceptions of infant needs and characteristics. (Author/BL)

Office work and complaints of the arms, neck and shoulders: the role of job characteristics, muscular tension and need for recovery.

PubMed

Gawke, Jason C; Gorgievski, Marjan J; van der Linden, Dimitri

2012-01-01

This study investigated physical, psychological and social job characteristics as potential risk factors for complaints of the arms, neck and shoulders (CANS) and mediating effects of muscular tension and need for recovery. Data were collected among 105 computer workers using questionnaires and electromyography (EMG), and were analyzed with linear regression analyses. Task interdependence, information processing and lower social support predicted more CANS. Physical job demands had no predictive power over and above psychological and social Stressors. Both muscular tension and need for recovery partially mediated the job characteristics-CANS relationships. Occupational health professionals should not neglect psychological and social job characteristics as potentially important predictors of CANS in specific occupational groups, such as office workers. Our findings imply that CANS interventions should not be restricted to ergonomic improvements, but should be accompanied by improvement of the job design from a psychological and social perspective and reactive intervention aimed at decreasing short-term physical strain (muscular tension) and mental strain (need for recovery).

Common characteristics of open source software development and applicability for drug discovery: a systematic review.

PubMed

Ardal, Christine; Alstadsæter, Annette; Røttingen, John-Arne

2011-09-28

Innovation through an open source model has proven to be successful for software development. This success has led many to speculate if open source can be applied to other industries with similar success. We attempt to provide an understanding of open source software development characteristics for researchers, business leaders and government officials who may be interested in utilizing open source innovation in other contexts and with an emphasis on drug discovery. A systematic review was performed by searching relevant, multidisciplinary databases to extract empirical research regarding the common characteristics and barriers of initiating and maintaining an open source software development project. Common characteristics to open source software development pertinent to open source drug discovery were extracted. The characteristics were then grouped into the areas of participant attraction, management of volunteers, control mechanisms, legal framework and physical constraints. Lastly, their applicability to drug discovery was examined. We believe that the open source model is viable for drug discovery, although it is unlikely that it will exactly follow the form used in software development. Hybrids will likely develop that suit the unique characteristics of drug discovery. We suggest potential motivations for organizations to join an open source drug discovery project. We also examine specific differences between software and medicines, specifically how the need for laboratories and physical goods will impact the model as well as the effect of patents.

Race, treatment preferences, and hospice enrollment. Eligibility criteria may exclude patients with the greatest needs for care

PubMed Central

Fishman, Jessica; O'Dwyer, Peter; Lu, Hien L.; Henderson, Hope; Asch, David A.; Casarett, David J.

2009-01-01

Background The requirement that patients give up curative treatment makes hospice enrollment unappealing for some patients, and may particularly limit use among African American patients. Objectives To determine whether African-American patients with cancer are more likely than white patients are to have preferences for cancer treatment that exclude them from hospice, and whether they are less likely to want specific hospice services. Methods 283 patients receiving treatment for cancer at six oncology clinics within the University of Pennsylvania Cancer Network completed conjoint interviews measuring their perceived need for five hospice services and their preferences for continuing cancer treatment. Patients were followed for six months or until death. Results African American patients had stronger preferences for continuing their cancer treatments on a 7-point scale even after adjusting for age, sex, finances, education, ECOG performance status, quality of life, and physical and psychological symptom burden (adjusted means 4.75 vs. 3.96; β coefficient 0.82; 95% confidence interval 0.22-1.41; p=0.007). African-American patients also had greater perceived needs for hospice services after adjusting for these characteristics (adjusted means 2.31 vs. 1.83) (β coefficient 0.51; 95% confidence interval 0.11-0.92; p=0.01). However, this effect disappeared after adjusting for household finances. Conclusions Hospice eligibility criteria may exclude African-American patients disproportionately despite greater perceived needs for hospice services in this population. The mechanisms driving this health disparity likely include both cultural differences and economic characteristics, and consideration should be given to redesigning hospice eligibility criteria. PMID:19107761

The role of CT in predicting the need for surgery in patients diagnosed with mesenteric phlebosclerosis.

PubMed

Lin, Wei-Ching; Chen, Jeon-Hor; Westphalen, Antonio Carlos; Liao, Chun-Han; Chen, Cheng-Hong; Chen, Chun-Ming; Lin, Chien-Heng

2016-10-01

To determine if imaging findings on computed tomography (CT) can predict the need of surgery in patients with idiopathic mesenteric phlebosclerosis (IMP).This retrospective study included 28 patients with IMP. Abdominal CT images were reviewed to determine the extent and severity of mesenteric calcifications and the presence of findings related to colitides. We compared the number of colonic segments with mesenteric venous calcification, a total calcification score, and the rate of colonic wall thickening, pericolic fat stranding, and bowel loop dilatation between patients undergoing surgery (surgery group) and patients without surgery (nonsurgery group). Comparisons were made using the Mann-Whitney U test and Fisher exact test. Receiver operating characteristic analysis was also performed. Inter-reader agreement for the calcification scores was analyzed using kappa statistics.The number of colonic segments with mesenteric venous calcification and the total calcification scores were both significantly higher in the surgery group than the nonsurgery group (4.33 vs 2.96, P = 0.003; and 15.00 vs 8.96, P <0.001). The areas under the receiver operating characteristics to identify patients who need surgery were 0.96 and 0.92, respectively. The prevalence of bowel loop dilatation in the surgery group was also significantly higher than that in the nonsurgery group (16% vs 100%, P = 0.011).Evaluation of the severity and extent of IMP based on the total mesenteric venous calcification score, number of involved colonic segments, and the presence bowel loop dilatation on CT may be useful to indicate the outcomes of conservative treatment and need for surgery.

Depressive symptoms and negative life events: What psycho-social factors protect or harm left-behind children in China?

PubMed

Guang, Yu; Feng, Zhengzhi; Yang, Guoyu; Yang, Yaling; Wang, Lifei; Dai, Qin; Hu, Chaobing; Liu, Keyu; Zhang, Rui; Xia, Fan; Zhao, Mengxue

2017-12-15

In China, children under 18 years old who are left at rural residences for at least 6 months by either one or both of their parents migrating to work in cities are called "left-behind children (LBC)". Due to restricted family support, they are at a greater risk of developing depressive symptoms than non-left-behind children (NLBC). The objective of this study is to explore how depressive symptoms and stress induced by negative life events such as interpersonal conflicts, punishment and loss, as well as their relationships vary for LBC with different left-behind-related characteristics. Using data from a large school-based survey conducted in Chongqing between December 2012 and June 2013, we first identified the differences in depressive symptoms and negative-event-induced stress between LBC and NLBC, and then analyzed the variances among LBC with different left-behind-related characteristics. The data was analyzed with Chi-square test, MANCOVA, ANCOVA, ANOVA, T-test and hierarchical multiple regression analyses. We found that LBC were more stressed when experiencing negative events and had more depressive symptoms than NLBC. Children left behind by both parents were most depressed. Negative-event-induced stress and communication on life difficulties with migrant parents were risk factors for depressive symptoms, whereas adequate communication on academic performance or children's feelings was a protective factor against depressive symptoms. Communication duration and frequency, communication by visiting, communication on academic performance, life difficulties and children's feelings moderated the relationship between stress and depressive symptoms, respectively. Duration of separation, communication duration and frequency, communication on academic performance, learning difficulties and children's feelings moderated the relation between the type of parental migration and depressive symptoms, respectively. Our findings suggest that children left behind by both parents should be the focus of public attention for their higher susceptibility to stress-related depression. To help LBC stay mentally healthy, governments need to formulate regulations contributing to LBC's family reunion, communities need to involve more residents to attend LBC as "surrogate parents" and teach migrant parents to communicate with LBC properly, and schools need to teach LBC how to deal with stress and communicate with migrant parents.

SSD Market Overview

NASA Astrophysics Data System (ADS)

Wong, G.

The unparalleled cost and form factor advantages of NAND flash memory has driven 35 mm photographic film, floppy disks and one-inch hard drives to extinction. Due to its compelling price/performance characteristics, NAND Flash memory is now expanding its reach into the once-exclusive domain of hard disk drives and DRAM in the form of Solid State Drives (SSDs). Driven by the proliferation of thin and light mobile devices and the need for near-instantaneous accessing and sharing of content through the cloud, SSDs are expected to become a permanent fixture in the computing infrastructure.

Fast track lunar NTR systems assessment for the First Lunar Outpost and its evolvability to Mars

NASA Technical Reports Server (NTRS)

Borowski, Stanley K.; Alexander, Stephen W.

1992-01-01

The objectives of the 'fast track' lunar Nuclear Thermal Rocket (NTR) analysis are to quantify necessary engine/stage characteristics to perform NASA's 'First Lunar Outpost' scenario and to assess the potential for evolution to Mars mission applications. By developing NTR/stage technologies for use in NASA's 'First Lunar Outpost' scenario, NASA will make a major down payment on the key components needed for the follow-on Mars Space Transportation System. A faster, cheaper approach to overall lunar/Mars exploration is expected.

Characterizing Complexity of Containerized Cargo X-ray Images

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wang, Guangxing; Martz, Harry; Glenn, Steven

X-ray imaging can be used to inspect cargos imported into the United States. In order to better understand the performance of X-ray inspection systems, the X-ray characteristics (density, complexity) of cargo need to be quantified. In this project, an image complexity measure called integrated power spectral density (IPSD) was studied using both DNDO engineered cargos and stream-of-commerce (SOC) cargos. A joint distribution of cargo density and complexity was obtained. A support vector machine was used to classify the SOC cargos into four categories to estimate the relative fractions.

A retrospective analysis of employee turnover in the health care setting.

PubMed

Bednar, B; McMullen, N

1998-02-01

Significant factors implicated in staff turnover include: variables in organizational structure; employee characteristics; needs and values, and the nature of tasks performed. This article will present the causative factors related to turnover and the conceptual models of the motivational theorists Maslow, Herzberg, Adams, and Mobley. No quantitative or qualitative research could be found on the potential causes of turnover in freestanding dialysis clinics. The staff turnover of a for-profit dialysis company for a 12 month period will be reported by job title, tenure, and level of job satisfaction.

Vehicle wheel drag coefficient in relation to travelling velocity - CFD analysis

NASA Astrophysics Data System (ADS)

Leśniewicz, P.; Kulak, M.; Karczewski, M.

2016-10-01

In order to understand the aerodynamic losses associated with a rotating automobile wheel, a detailed characteristics of the drag coefficient in relation to the applied velocity are necessary. Single drag coefficient value is most often reported for the commercially available vehicles, much less is revealed about the influence of particular car components on the energy consumption in various driving cycles. However, detailed flow potential losses determination is desired for performance estimation. To address these needs, the numerical investigation of an isolated wheel is proposed herein.

Tests for predicting complications of pre-eclampsia: A protocol for systematic reviews

PubMed Central

Thangaratinam, Shakila; Coomarasamy, Arri; Sharp, Steve; O'Mahony, Fidelma; O'Brien, Shaughn; Ismail, Khaled MK; Khan, Khalid S

2008-01-01

Background Pre-eclampsia is associated with several complications. Early prediction of complications and timely management is needed for clinical care of these patients to avert fetal and maternal mortality and morbidity. There is a need to identify best testing strategies in pre eclampsia to identify the women at increased risk of complications. We aim to determine the accuracy of various tests to predict complications of pre-eclampsia by systematic quantitative reviews. Method We performed extensive search in MEDLINE (1951–2004), EMBASE (1974–2004) and also will also include manual searches of bibliographies of primary and review articles. An initial search has revealed 19500 citations. Two reviewers will independently select studies and extract data on study characteristics, quality and accuracy. Accuracy data will be used to construct 2 × 2 tables. Data synthesis will involve assessment for heterogeneity and appropriately pooling of results to produce summary Receiver Operating Characteristics (ROC) curve and summary likelihood ratios. Discussion This review will generate predictive information and integrate that with therapeutic effectiveness to determine the absolute benefit and harm of available therapy in reducing complications in women with pre-eclampsia. PMID:18694494

Improving Health Care Management in Primary Care for Homeless People: A Literature Review

PubMed Central

Abcaya, Julien; Ștefan, Diana-Elena; Calvet-Montredon, Céline; Gentile, Stéphanie

2018-01-01

Background: Homeless people have poorer health status than the general population. They need complex care management, because of associated medical troubles (somatic and psychiatric) and social difficulties. We aimed to describe the main characteristics of the primary care programs that take care of homeless people, and to identify which could be most relevant. Methods: We performed a literature review that included articles which described and evaluated primary care programs for homeless people. Results: Most of the programs presented a team-based approach, multidisciplinary and/or integrated care. They often proposed co-located services between somatic health services, mental health services and social support services. They also tried to answer to the specific needs of homeless people. Some characteristics of these programs were associated with significant positive outcomes: tailored primary care organizations, clinic orientation, multidisciplinary team-based models which included primary care physicians and clinic nurses, integration of social support, and engagement in the community’s health. Conclusions: Primary health care programs that aimed at taking care of the homeless people should emphasize a multidisciplinary approach and should consider an integrated (mental, somatic and social) care model. PMID:29439403

The Composition and Characteristics of the Dendroflora in the Transformed Conditions of the Middle Reaches of the River Khoper

NASA Astrophysics Data System (ADS)

Larionov, M. V.; Larionov, N. V.; Siraeva, I. S.; Ermolenko, A. S.

2018-01-01

Green plantings of the cities perform a number of important functions which provide ecological needs of cities population for a healthy surrounding medium, and his needs for communication with wildlife. The comparative analysis of species of wood plants of the towns of the Voronezh region (Borisoglebsk and Novokhopersk) was carried out. 110 types (to Borisoglebsk) and 91 species (to Novokhopersk) species of trees and bushes are registered. The systematic structure which showed a dominance of angiospermous plants that in general is characteristic of the urbanized territories. The range of geographical elements is presented by three types (European-West Asian - 35% and 40%, European - 30% and 26%, North -American - 14% and 21%). The prevailing life forms of the cities are trees, they make 56% and 60% respectively. Researchers showed, in the cities of east part of the Voronezh region many types of various origin can grow that helps to solve problems in gardening, afforestation and an agrarian and forest melioration, in creation of dendrology nurseries for the purpose of maintaining a genetic variety and the subsequent introduction of wood plants and bushes in culture.

[Diamond-Forrester and cardiac CT : Is there a need to redefine the pretest probability of coronary artery disease?].

PubMed

Schuhbäck, A; Kolwelter, J; Achenbach, S

2016-08-01

Apart from the Diamond-Forrester classification, which is widely used particularly in the USA for the pretest probability of coronary artery disease, other scores also exist, such as an updated version of the classification table by Genders et al., the Morise score and the Duke clinical risk score. These scores estimate the probability of coronary artery disease, defined as the presence of at least one high-grade stenosis, based on symptom characteristics, age, gender and other parameters. All of the scores were derived from patient cohorts in which invasive coronary angiography had been performed for clinical reasons. It has subsequently been shown that these scores, especially those developed several decades ago, substantially overestimate the pretest probability of coronary artery disease. When these risk scores are applied to patients for whom a non-invasive work-up of suspected coronary artery disease is planned, for example by coronary computed tomography (CT) angiography, the expected prevalence of significant coronary stenosis will be overestimated. This, in turn, influences the test characteristics and the significance of the non-invasive examination (positive and negative predictive values) and needs to be taken into account when interpreting test results.

Nurse managers describe their practice environments.

PubMed

Warshawsky, Nora E; Lake, Sharon W; Brandford, Arica

2013-01-01

Hospital work environments that support the professional practice of nurses are critical to patient safety. Nurse managers are responsible for creating these professional practice environments for staff nurses, yet little is known about the environments needed to support nurse managers. Domains of nurse managers' practice environment have recently been defined. This is a secondary analysis of 2 cross-sectional studies of organizational characteristics that influence nurse manager practice. Content analysis of the free text comments from 127 nurse managers was used to illustrate the 8 domains of nurse managers' practice environments. Nurse managers valued time spent with their staff; therefore, workloads must permit meaningful interaction. Directors demonstrated trust when they empowered nurse managers to make decisions. Administrative leaders should build patient safety cultures on the basis of shared accountability and mutual respect among the health care team. The expectations of nurse managers have greatly expanded in the volume and complexity of direct reports, patient care areas, and job functions. The nurse managers in this analysis reported characteristics of their practice environments that limit their role effectiveness and may negatively impact organizational performance. Further research is needed to understand the effects of nurse managers' practice environments on staff and patient outcomes.

[Medicine and the sexual distribution of work: an analysis of the scientific discourse on the role of the "human factor" in improving performance at work (Spain, 1922-1936)].

PubMed

Pérez, José Martínez

2008-01-01

During the first third of the twentieth century, and especially after the 1920s, a discourse on occupational hygiene and safety began to develop in Spain. This discourse, without rejecting the value of the work carried out in the factory environment, particularly stressed the need to take into account what was called the "human factor." Promoted mainly by the budding occupational doctors and psychologists, this discourse became part of both the lines of biological thinking of constitutional pathology as well as the economic ideas of the so-called OCT, and it expounded the need to take the somatic and psychic characteristics of people into account in order to carry out "rational" distribution of the same in the workplace. The article aims to highlight the way in which this discourse contained elements that would help to attribute specific roles within the workplace based on the biological and psychological characteristics of men and women, so facilitating the legitimisation of a sexual distribution of work which helped to reinforce the social organization of gender at that time.

Analysis of Generator Oscillation Characteristics Based on Multiple Synchronized Phasor Measurements

NASA Astrophysics Data System (ADS)

Hashiguchi, Takuhei; Yoshimoto, Masamichi; Mitani, Yasunori; Saeki, Osamu; Tsuji, Kiichiro

In recent years, there has been considerable interest in the on-line measurement, such as observation of power system dynamics and evaluation of machine parameters. On-line methods are particularly attractive since the machine’s service need not be interrupted and parameter estimation is performed by processing measurements obtained during the normal operation of the machine. Authors placed PMU (Phasor Measurement Unit) connected to 100V outlets in some Universities in the 60Hz power system and examine oscillation characteristics in power system. PMU is synchronized based on the global positioning system (GPS) and measured data are transmitted via Internet. This paper describes an application of PMU for generator oscillation analysis. The purpose of this paper is to show methods for processing phase difference and to estimate damping coeffcient and natural angular frequency from phase difference at steady state.

Emotional Intelligence and Transformational Leadership in Nurse Managers.

PubMed

Spano-Szekely, Lauraine; Quinn Griffin, Mary T; Clavelle, Joanne; Fitzpatrick, Joyce J

2016-02-01

This study describes the relationship between emotional intelligence (EI) and transformational leadership (TL) in nurse managers (NMs). Effective NM leadership is important as they have direct influence over RN performance and patient outcomes. Research has demonstrated that a TL style generates greater commitment from followers than other leadership styles. EI is 1 potential characteristic of TL. A descriptive exploratory research study was conducted to correlate EI and TL practices of NMs. EI was significantly positively correlated with TL and outcome measures of extra-effort, effectiveness, and satisfaction and significantly negatively correlated with laissez-faire leadership. A positive relationship was found between TL and NMs with advanced education and administrative certification. Nursing administrators should consider EI characteristics when hiring NMs and lead efforts to advance education to align with organization needs for business and strategic essentials necessary for NM effectiveness.

Comprehensive phase diagram of two-dimensional space charge doped Bi2Sr2CaCu2O8+x.

PubMed

Sterpetti, Edoardo; Biscaras, Johan; Erb, Andreas; Shukla, Abhay

2017-12-12

The phase diagram of hole-doped high critical temperature superconductors as a function of doping and temperature has been intensively studied with chemical variation of doping. Chemical doping can provoke structural changes and disorder, masking intrinsic effects. Alternatively, a field-effect transistor geometry with an electrostatically doped, ultra-thin sample can be used. However, to probe the phase diagram, carrier density modulation beyond 10 14  cm -2 and transport measurements performed over a large temperature range are needed. Here we use the space charge doping method to measure transport characteristics from 330 K to low temperature. We extract parameters and characteristic temperatures over a large doping range and establish a comprehensive phase diagram for one-unit-cell-thick BSCCO-2212 as a function of doping, temperature and disorder.

A systematic review of interventions conducted in clinical or community settings to improve dual-task postural control in older adults.

PubMed

Agmon, Maayan; Belza, Basia; Nguyen, Huong Q; Logsdon, Rebecca G; Kelly, Valerie E

2014-01-01

Injury due to falls is a major problem among older adults. Decrements in dual-task postural control performance (simultaneously performing two tasks, at least one of which requires postural control) have been associated with an increased risk of falling. Evidence-based interventions that can be used in clinical or community settings to improve dual-task postural control may help to reduce this risk. THE AIMS OF THIS SYSTEMATIC REVIEW ARE: 1) to identify clinical or community-based interventions that improved dual-task postural control among older adults; and 2) to identify the key elements of those interventions. Studies were obtained from a search conducted through October 2013 of the following electronic databases: PubMed, CINAHL, PsycINFO, and Web of Science. Randomized and nonrandomized controlled studies examining the effects of interventions aimed at improving dual-task postural control among community-dwelling older adults were selected. All studies were evaluated based on methodological quality. Intervention characteristics including study purpose, study design, and sample size were identified, and effects of dual-task interventions on various postural control and cognitive outcomes were noted. Twenty-two studies fulfilled the selection criteria and were summarized in this review to identify characteristics of successful interventions. The ability to synthesize data was limited by the heterogeneity in participant characteristics, study designs, and outcome measures. Dual-task postural control can be modified by specific training. There was little evidence that single-task training transferred to dual-task postural control performance. Further investigation of dual-task training using standardized outcome measurements is needed.

On the practice of ignoring center-patient interactions in evaluating hospital performance.

PubMed

Varewyck, Machteld; Vansteelandt, Stijn; Eriksson, Marie; Goetghebeur, Els

2016-01-30

We evaluate the performance of medical centers based on a continuous or binary patient outcome (e.g., 30-day mortality). Common practice adjusts for differences in patient mix through outcome regression models, which include patient-specific baseline covariates (e.g., age and disease stage) besides center effects. Because a large number of centers may need to be evaluated, the typical model postulates that the effect of a center on outcome is constant over patient characteristics. This may be violated, for example, when some centers are specialized in children or geriatric patients. Including interactions between certain patient characteristics and the many fixed center effects in the model increases the risk for overfitting, however, and could imply a loss of power for detecting centers with deviating mortality. Therefore, we assess how the common practice of ignoring such interactions impacts the bias and precision of directly and indirectly standardized risks. The reassuring conclusion is that the common practice of working with the main effects of a center has minor impact on hospital evaluation, unless some centers actually perform substantially better on a specific group of patients and there is strong confounding through the corresponding patient characteristic. The bias is then driven by an interplay of the relative center size, the overlap between covariate distributions, and the magnitude of the interaction effect. Interestingly, the bias on indirectly standardized risks is smaller than on directly standardized risks. We illustrate our findings by simulation and in an analysis of 30-day mortality on Riksstroke. © 2015 The Authors. Statistics in Medicine published by John Wiley & Sons Ltd.

Bioprosthetic tissue matrices in complex abdominal wall reconstruction.

PubMed

Broyles, Justin M; Abt, Nicholas B; Sacks, Justin M; Butler, Charles E

2013-12-01

Complex abdominal defects are difficult problems encountered by surgeons in multiple specialties. Although current evidence supports the primary repair of these defects with mesh reinforcement, it is unclear which mesh is superior for any given clinical scenario. The purpose of this review was to explore the characteristics of and clinical relevance behind bioprosthetic tissue matrices in an effort to better clarify their role in abdominal wall reconstruction. We reviewed the peer-reviewed literature on the use of bioprosthetic mesh in human subjects. Basic science articles and large retrospective and prospective reviews were included in author's analysis. The clinical performance and characteristics of 13 bioprosthetic tissue matrices were evaluated. The majority of the products evaluated perform well in contaminated fields, where the risk of wound-healing difficulties is high. Clinical outcomes, which included infection, reherniation, and bulge formation, were variable, and the majority of the studies had a mean follow-up of less than 24 months. Although bioprosthetic matrix has a multitude of indications within the growing field of abdominal wall reconstruction, the functionality, regenerative capacity, and long-term fate of these products have yet to be fully established. Furthermore, the clinical performance, indications, and contraindications for each type of matrix need to be fully evaluated in long-term outcome studies.

Bioprosthetic Tissue Matrices in Complex Abdominal Wall Reconstruction

PubMed Central

Broyles, Justin M.; Abt, Nicholas B.; Sacks, Justin M.

2013-01-01

Background: Complex abdominal defects are difficult problems encountered by surgeons in multiple specialties. Although current evidence supports the primary repair of these defects with mesh reinforcement, it is unclear which mesh is superior for any given clinical scenario. The purpose of this review was to explore the characteristics of and clinical relevance behind bioprosthetic tissue matrices in an effort to better clarify their role in abdominal wall reconstruction. Methods: We reviewed the peer-reviewed literature on the use of bioprosthetic mesh in human subjects. Basic science articles and large retrospective and prospective reviews were included in author’s analysis. The clinical performance and characteristics of 13 bioprosthetic tissue matrices were evaluated. Results: The majority of the products evaluated perform well in contaminated fields, where the risk of wound-healing difficulties is high. Clinical outcomes, which included infection, reherniation, and bulge formation, were variable, and the majority of the studies had a mean follow-up of less than 24 months. Conclusions: Although bioprosthetic matrix has a multitude of indications within the growing field of abdominal wall reconstruction, the functionality, regenerative capacity, and long-term fate of these products have yet to be fully established. Furthermore, the clinical performance, indications, and contraindications for each type of matrix need to be fully evaluated in long-term outcome studies. PMID:25289285

Associations between Otolaryngology Applicant Characteristics and Future Performance in Residency or Practice: A Systematic Review.

PubMed

Bowe, Sarah N; Laury, Adrienne M; Gray, Stacey T

2017-06-01

Objective This systematic review aims to evaluate which applicant characteristics available to an otolaryngology selection committee are associated with future performance in residency or practice. Data Sources PubMed, Scopus, ERIC, Health Business, Psychology and Behavioral Sciences Collection, and SocINDEX. Review Methods Study eligibility was performed by 2 independent investigators in accordance with the PRISMA protocol (Preferred Reporting Items for Systematic Reviews and Meta-analyses). Data obtained from each article included research questions, study design, predictors, outcomes, statistical analysis, and results/findings. Study bias was assessed with the Quality in Prognosis Studies tool. Results The initial search identified 439 abstracts. Six articles fulfilled all inclusion and exclusion criteria. All studies were retrospective cohort studies (level 4). Overall, the studies yielded relatively few criteria that correlated with residency success, with generally conflicting results. Most studies were found to have a high risk of bias. Conclusion Previous resident selection research has lacked a theoretical background, thus predisposing this work to inconsistent results and high risk of bias. The included studies provide historical insight into the predictors and criteria (eg, outcomes) previously deemed pertinent by the otolaryngology field. Additional research is needed, possibly integrating aspects of personnel selection, to engage in an evidence-based approach to identify highly qualified candidates who will succeed as future otolaryngologists.

Optical characteristics of waste stabilization ponds: recommendations for monitoring.

PubMed

Davies-Colley, R J; Craggs, R J; Park, J; Nagels, J W

2005-01-01

The optical character of waste stabilization ponds (WSPs) is of concern for several reasons. Algal photosynthesis, which produces oxygen for waste oxidation in WSPs, is influenced by attenuation of sunlight in ponds. Disinfection in WSPs is influenced by optical characteristics because solar UV exposure usually dominates inactivation. The optical nature of WSPs effluent also affects assimilation by receiving waters. Despite the importance of light behaviour in WSPs, few studies have been made of their optical characteristics. We discuss simple optical measures suitable for routine monitoring of WSPs (including at sites remote from laboratories): optical density of filtrates - an index of dissolved coloured organic (humic) matter, visual clarity - to provide an estimate of the beam attenuation coefficient (a fundamental quantity needed for optical modelling) colour (hue) - as an indicator of general WSP 'condition' and irradiance attenuation quantifying depth of light penetration. The value of optical characterisation of WSPs is illustrated with reference to optical data for WSPs in NZ (including high-rate algal ponds) treating dairy cattle wastewater versus domestic sewage. We encourage increased research on optical characteristics of WSPs and the incorporation of optical measures in monitoring and modelling of WSP performance.

Community Junior College Faculty: Needs, Characteristics, and Sources.

ERIC Educational Resources Information Center

Wurster, Stanley R.

The growing need for junior college teachers stimulated this examination of teacher characteristics and potential sources of new teachers. Since junior colleges will receive an increasing share of the nation's college enrollment, junior colleges must attract qualified faculty members. The literature on junior college faculty characteristics…

Post-Adoption Services: Needs of the Family

ERIC Educational Resources Information Center

Anderson, Denise

2005-01-01

This study, conducted in an agency providing post-adoption services, describes the demographic characteristics of parents and children in post-adoptive families and assesses the differences in perceptions between mothers and fathers, as well as other characteristics of families who adopt children with special needs. (Contains 3 tables.)

Strategic planning for employee happiness: a business goal for human service organizations.

PubMed

Howard, B; Gould, K E

2000-09-01

Employee happiness can impact substantially on an organization's performance. It can influence employee retention, absenteeism, and work performance. Because of this importance, such happiness is inseparable from the real business of the organization and should be considered a business goal. Implementation and development of the strategic plan associated with this goal becomes the responsibility of a highly placed project team that has as its mission ensuring employee satisfaction. The strategic plan includes procedures that allow management to listen effectively to employees, assessing and responding to their values and needs. In this paper we discuss the workforce and environmental characteristics that are involved planning for employee happiness and the steps in creating an organizational culture in which this can become a business goal.

Enabling communication concurrency through flexible MPI endpoints

DOE PAGES

Dinan, James; Grant, Ryan E.; Balaji, Pavan; ...

2014-09-23

MPI defines a one-to-one relationship between MPI processes and ranks. This model captures many use cases effectively; however, it also limits communication concurrency and interoperability between MPI and programming models that utilize threads. Our paper describes the MPI endpoints extension, which relaxes the longstanding one-to-one relationship between MPI processes and ranks. Using endpoints, an MPI implementation can map separate communication contexts to threads, allowing them to drive communication independently. Also, endpoints enable threads to be addressable in MPI operations, enhancing interoperability between MPI and other programming models. Furthermore, these characteristics are illustrated through several examples and an empirical study thatmore » contrasts current multithreaded communication performance with the need for high degrees of communication concurrency to achieve peak communication performance.« less

Electromagnetic physics models for parallel computing architectures

DOE PAGES

Amadio, G.; Ananya, A.; Apostolakis, J.; ...

2016-11-21

The recent emergence of hardware architectures characterized by many-core or accelerated processors has opened new opportunities for concurrent programming models taking advantage of both SIMD and SIMT architectures. GeantV, a next generation detector simulation, has been designed to exploit both the vector capability of mainstream CPUs and multi-threading capabilities of coprocessors including NVidia GPUs and Intel Xeon Phi. The characteristics of these architectures are very different in terms of the vectorization depth and type of parallelization needed to achieve optimal performance. In this paper we describe implementation of electromagnetic physics models developed for parallel computing architectures as a part ofmore » the GeantV project. Finally, the results of preliminary performance evaluation and physics validation are presented as well.« less

Enabling communication concurrency through flexible MPI endpoints

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dinan, James; Grant, Ryan E.; Balaji, Pavan

MPI defines a one-to-one relationship between MPI processes and ranks. This model captures many use cases effectively; however, it also limits communication concurrency and interoperability between MPI and programming models that utilize threads. Our paper describes the MPI endpoints extension, which relaxes the longstanding one-to-one relationship between MPI processes and ranks. Using endpoints, an MPI implementation can map separate communication contexts to threads, allowing them to drive communication independently. Also, endpoints enable threads to be addressable in MPI operations, enhancing interoperability between MPI and other programming models. Furthermore, these characteristics are illustrated through several examples and an empirical study thatmore » contrasts current multithreaded communication performance with the need for high degrees of communication concurrency to achieve peak communication performance.« less

Enabling communication concurrency through flexible MPI endpoints

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dinan, James; Grant, Ryan E.; Balaji, Pavan

MPI defines a one-to-one relationship between MPI processes and ranks. This model captures many use cases effectively; however, it also limits communication concurrency and interoperability between MPI and programming models that utilize threads. This paper describes the MPI endpoints extension, which relaxes the longstanding one-to-one relationship between MPI processes and ranks. Using endpoints, an MPI implementation can map separate communication contexts to threads, allowing them to drive communication independently. Endpoints also enable threads to be addressable in MPI operations, enhancing interoperability between MPI and other programming models. These characteristics are illustrated through several examples and an empirical study that contrastsmore » current multithreaded communication performance with the need for high degrees of communication concurrency to achieve peak communication performance.« less

Performance Test on Compression Ignition Engine by Blending Ethanol and Waste Plastic Pyrolysis Oil with Cetane Additive

NASA Astrophysics Data System (ADS)

Padmanabhan, S.; Ganesan, S.; Jeswin Arputhabalan, J.; Chithrala, Varun; Ganesh Bairavan, P.

2017-05-01

The demand for diesel fuel is higher than that of petrol throughout the world hence seeking alternative to mineral diesel is a natural choice. Alternative fuels should be easily available at lower cost, environment friendly and fulfill energy needs without modifying engine’s operational parameters. Waste to energy is the trend in the selection of alternate fuels. In this work, Waste Plastic Pyrolysis oil (WPPO), Ethanol, Diesel blend with Cetane additive has been attempted as an alternative fuel. A Twin cylinder, Direct Injection engine was used to assess the engine performance and emission characteristics of waste plastic pyrolysis oil with cetane additive. Experimental results of blended plastic fuel and diesel fuel were compared.

Toward an Efficient Icing CFD Process Using an Interactive Software Toolkit: Smagglce 2D

NASA Technical Reports Server (NTRS)

Vickerman, Mary B.; Choo, Yung K.; Schilling, Herbert W.; Baez, Marivell; Braun, Donald C.; Cotton, Barbara J.

2001-01-01

Two-dimensional CID analysis for iced airfoils can be a labor-intensive task. The software toolkit SmaggIce 2D is being developed to help streamline the CID process and provide the unique features needed for icing. When complete, it will include a combination of partially automated and fully interactive tools for all aspects of the tasks leading up to the flow analysis: geometry preparation, domain decomposition. block boundary demoralization. gridding, and linking with a flow solver. It also includes tools to perform ice shape characterization, an important aid in determining the relationship between ice characteristics and their effects on aerodynamic performance. Completed tools, work-in-progress, and planned features of the software toolkit are presented here.

The structure and organization of local and state public health agencies in the U.S.: a systematic review.

PubMed

Hyde, Justeen K; Shortell, Stephen M

2012-05-01

This systematic review provides a synthesis of the growing field of public health systems research related to the structure and organization of state and local governmental public health agencies. It includes an overview of research examining the influence of organizational characteristics on public health performance and health status and a summary of the strengths and gaps of the literature to date. Data were retrieved through an iterative process, beginning with key word searches in three publication databases (PubMed, JSTOR, Web of Science). Gray literature was searched through the use of Google Scholar™. Targeted searches on websites and key authors were also performed. Documents underwent an initial and secondary screening; they were retained if they contained information about local or state public health structure, organization, governance, and financing. 77 articles met the study criteria. Public health services are delivered by a mix of local, state, and tribal governmental and nongovernmental agencies and delivered through centralized (28%); decentralized (37%); or combined authority (35%). The majority of studies focused on organizational characteristics that are associated with public health performance based on the 10 Essential Public Health Services framework. Population size of jurisdiction served (>50,000); structure of authority (decentralized and mixed); per capita spending at the local level; some partnerships (academic, health services); and leadership of agency directors have been found to be related to public health performance. Fewer studies examined the relationship between organizational characteristics and health outcomes. Improvements in health outcomes are associated with an increase in local health department expenditures, FTEs per capita, and location of health department within local networks. Public health systems in the U.S. face a number of critical challenges, including limited organizational capacity and financial resources. Evidence on the relationship of public health organization, performance, and health outcomes is limited. Public health systems are difficult to characterize and categorize consistently for cross-jurisdictional studies. Progress has been made toward creating standard terminology. Multi-site studies that include a mix of system types (e.g., centralized, decentralized) and local or state characteristics (e.g., urban, rural) are needed to refine existing categorizations that can be used in examining studies of public health agency performance. Copyright © 2012 American Journal of Preventive Medicine. Published by Elsevier Inc. All rights reserved.

Which intervention design factors influence performance of community health workers in low- and middle-income countries? A systematic review

PubMed Central

Kok, Maryse C; Dieleman, Marjolein; Taegtmeyer, Miriam; Broerse, Jacqueline EW; Kane, Sumit S; Ormel, Hermen; Tijm, Mandy M; de Koning, Korrie AM

2015-01-01

Community health workers (CHWs) are increasingly recognized as an integral component of the health workforce needed to achieve public health goals in low- and middle-income countries (LMICs). Many factors influence CHW performance. A systematic review was conducted to identify intervention design related factors influencing performance of CHWs. We systematically searched six databases for quantitative and qualitative studies that included CHWs working in promotional, preventive or curative primary health services in LMICs. One hundred and forty studies met the inclusion criteria, were quality assessed and double read to extract data relevant to the design of CHW programmes. A preliminary framework containing factors influencing CHW performance and characteristics of CHW performance (such as motivation and competencies) guided the literature search and review. A mix of financial and non-financial incentives, predictable for the CHWs, was found to be an effective strategy to enhance performance, especially of those CHWs with multiple tasks. Performance-based financial incentives sometimes resulted in neglect of unpaid tasks. Intervention designs which involved frequent supervision and continuous training led to better CHW performance in certain settings. Supervision and training were often mentioned as facilitating factors, but few studies tested which approach worked best or how these were best implemented. Embedment of CHWs in community and health systems was found to diminish workload and increase CHW credibility. Clearly defined CHW roles and introduction of clear processes for communication among different levels of the health system could strengthen CHW performance. When designing community-based health programmes, factors that increased CHW performance in comparable settings should be taken into account. Additional intervention research to develop a better evidence base for the most effective training and supervision mechanisms and qualitative research to inform policymakers in development of CHW interventions are needed. PMID:25500559

Understanding InP Nanowire Array Solar Cell Performance by Nanoprobe-Enabled Single Nanowire Measurements.

PubMed

Otnes, Gaute; Barrigón, Enrique; Sundvall, Christian; Svensson, K Erik; Heurlin, Magnus; Siefer, Gerald; Samuelson, Lars; Åberg, Ingvar; Borgström, Magnus T

2018-05-09

III-V solar cells in the nanowire geometry might hold significant synthesis-cost and device-design advantages as compared to thin films and have shown impressive performance improvements in recent years. To continue this development there is a need for characterization techniques giving quick and reliable feedback for growth development. Further, characterization techniques which can improve understanding of the link between nanowire growth conditions, subsequent processing, and solar cell performance are desired. Here, we present the use of a nanoprobe system inside a scanning electron microscope to efficiently contact single nanowires and characterize them in terms of key parameters for solar cell performance. Specifically, we study single as-grown InP nanowires and use electron beam induced current characterization to understand the charge carrier collection properties, and dark current-voltage characteristics to understand the diode recombination characteristics. By correlating the single nanowire measurements to performance of fully processed nanowire array solar cells, we identify how the performance limiting parameters are related to growth and/or processing conditions. We use this understanding to achieve a more than 7-fold improvement in efficiency of our InP nanowire solar cells, grown from a different seed particle pattern than previously reported from our group. The best cell shows a certified efficiency of 15.0%; the highest reported value for a bottom-up synthesized InP nanowire solar cell. We believe the presented approach have significant potential to speed-up the development of nanowire solar cells, as well as other nanowire-based electronic/optoelectronic devices.

Task Characteristics, Structural Characteristics, Organizational Relationships, and Communication Processes: A Contingency Approach to Job Performance. Phase III.

ERIC Educational Resources Information Center

Petelle, John L.; Garthright-Petelle, Kathleen

A study examined the relationships between (1) employee job performance and organizational relationships, (2) employee job performance and communication processes, (3) organizational relationships and communication processes, and (4) task characteristics and structural characteristics. Data were gathered from approximately 200 employees of a state…

Patient characteristics associated with multiple pharmacy use in the U.S. population: Findings from the Medical Expenditure Panel Survey.

PubMed

Look, Kevin A

2015-01-01

Multiple pharmacy use (MPU) is an important safety and quality issue, as it results in fragmented patient care. However, few studies have examined patient characteristics predicting the use of multiple pharmacies, and the findings have been inconsistent. To identify patient characteristics associated with MPU using national data. Data were obtained from the 2011 U.S. Medical Expenditure Panel Survey. The dependent variable was MPU, or the use of more than one pharmacy. The Andersen Behavioral Model of Health Service Use was used to guide the selection of independent variables, which were categorized as predisposing, enabling, and medical need related characteristics. Multivariable logistic regression analysis was conducted to identify the relationships between predisposing, enabling, and need variables and MPU in a hierarchical fashion. Point estimates were weighted to the U.S. non-institutionalized population, and to adjust standard errors to account for the complex survey design. MPU was common, with a national prevalence of 41.3%. Individuals aged 40-64 and adults 65 and older were significantly less likely to use multiple pharmacies as patients aged 18-39 years (40-64 years OR: 0.67, CI: 0.58-0.77; ≥65 years OR: 0.49, CI: 0.41-0.58). Females were significantly more likely to use multiple pharmacies than males (OR: 1.16, CI: 1.05-1.29). Individuals lacking health insurance were more likely to use multiple pharmacies as individuals with private health insurance (OR: 1.42, CI: 1.16-1.73); in contrast, individuals having drug insurance were more likely to use multiple pharmacies (OR: 1.25, CI: 1.06-1.47) relative to those without drug insurance. Any mail order use was the strongest predictor of MPU (OR: 6.94, CI: 5.90-8.18). Pharmacists and other health care providers need to be aware that their patients may be using multiple pharmacies, especially younger patients, those lacking access to health insurance, or those using mail order pharmacies. The findings from this study can be used to identify patients that may need additional monitoring to ensure safe and appropriate drug therapy, and has important implications as health care continues to shift toward performance-based reimbursement and quality ratings. Copyright © 2015 Elsevier Inc. All rights reserved.

Clinical trials in palliative care: a systematic review of their methodological characteristics and of the quality of their reporting.

PubMed

Bouça-Machado, Raquel; Rosário, Madalena; Alarcão, Joana; Correia-Guedes, Leonor; Abreu, Daisy; Ferreira, Joaquim J

2017-01-25

Over the past decades there has been a significant increase in the number of published clinical trials in palliative care. However, empirical evidence suggests that there are methodological problems in the design and conduct of studies, which raises questions about the validity and generalisability of the results and of the strength of the available evidence. We sought to evaluate the methodological characteristics and assess the quality of reporting of clinical trials in palliative care. We performed a systematic review of published clinical trials assessing therapeutic interventions in palliative care. Trials were identified using MEDLINE (from its inception to February 2015). We assessed methodological characteristics and describe the quality of reporting using the Cochrane Risk of Bias tool. We retrieved 107 studies. The most common medical field studied was oncology, and 43.9% of trials evaluated pharmacological interventions. Symptom control and physical dimensions (e.g. intervention on pain, breathlessness, nausea) were the palliative care-specific issues most studied. We found under-reporting of key information in particular on random sequence generation, allocation concealment, and blinding. While the number of clinical trials in palliative care has increased over time, methodological quality remains suboptimal. This compromises the quality of studies. Therefore, a greater effort is needed to enable the appropriate performance of future studies and increase the robustness of evidence-based medicine in this important field.

Representative learning design in springboard diving: Is dry-land training representative of a pool dive?

PubMed

Barris, Sian; Davids, Keith; Farrow, Damian

2013-01-01

Two distinctly separate training facilities (dry-land and aquatic) are routinely used in springboard diving and pose an interesting problem for learning, given the inherent differences in landing (head first vs. feet first) imposed by the different task constraints. Although divers may practise the same preparation phase, take-off and initial aerial rotation in both environments, there is no evidence to suggest that the tasks completed in the dry-land training environment are representative of those performed in the aquatic competition environment. The aim of this study was to compare the kinematics of the preparation phase of reverse dives routinely practised in each environment. Despite their high skill level, it was predicted that individual analyses of elite springboard divers would reveal differences in the joint coordination and board-work between take-offs. The two-dimensional kinematic characteristics were recorded during normal training sessions and used for intra-individual analysis. Kinematic characteristics of the preparatory take-off phase revealed differences in board-work (step lengths, jump height, board depression angles) for all participants at key events. However, the presence of scaled global topological characteristics suggested that all participants adopted similar joint coordination patterns in both environments. These findings suggest that the task constraints of wet and dry training environments are not similar, and highlight the need for coaches to consider representative learning designs in high performance diving programmes.

Semantic extraction and processing of medical records for patient-oriented visual index

NASA Astrophysics Data System (ADS)

Zheng, Weilin; Dong, Wenjie; Chen, Xiangjiao; Zhang, Jianguo

2012-02-01

To have comprehensive and completed understanding healthcare status of a patient, doctors need to search patient medical records from different healthcare information systems, such as PACS, RIS, HIS, USIS, as a reference of diagnosis and treatment decisions for the patient. However, it is time-consuming and tedious to do these procedures. In order to solve this kind of problems, we developed a patient-oriented visual index system (VIS) to use the visual technology to show health status and to retrieve the patients' examination information stored in each system with a 3D human model. In this presentation, we present a new approach about how to extract the semantic and characteristic information from the medical record systems such as RIS/USIS to create the 3D Visual Index. This approach includes following steps: (1) Building a medical characteristic semantic knowledge base; (2) Developing natural language processing (NLP) engine to perform semantic analysis and logical judgment on text-based medical records; (3) Applying the knowledge base and NLP engine on medical records to extract medical characteristics (e.g., the positive focus information), and then mapping extracted information to related organ/parts of 3D human model to create the visual index. We performed the testing procedures on 559 samples of radiological reports which include 853 focuses, and achieved 828 focuses' information. The successful rate of focus extraction is about 97.1%.

Vulnerable Youth: Identifying Their Need for Alternative Educational Settings.

ERIC Educational Resources Information Center

Zweig, Janine M.

This paper examines the extent to which alternative education can meet the needs of disconnected youth who are at risk of economic and social hardship. It summarizes characteristics of disconnected youth, risk factors associated with disconnection, and characteristics of students in selected alternative education settings. The most common factors…

Social-Emotional Characteristics and Special Educational Needs

ERIC Educational Resources Information Center

Meijer, Joost; Fossen, Miriam W. E. B.; van Putten, Cornelis M.; van der Leij, Aryan

2006-01-01

The aim of the research described in this article was the development of an instrument to measure social emotional characteristics and special educational and pedagogical needs of students in the last grade of primary education. Questionnaires were developed for teachers as well as for students. Exploratory factor analyses showed that the factors…

Low cognitive load strengthens distractor interference while high load attenuates when cognitive load and distractor possess similar visual characteristics.

PubMed

Minamoto, Takehiro; Shipstead, Zach; Osaka, Naoyuki; Engle, Randall W

2015-07-01

Studies on visual cognitive load have reported inconsistent effects of distractor interference when distractors have visual characteristic that are similar to the cognitive load. Some studies have shown that the cognitive load enhances distractor interference, while others reported an attenuating effect. We attribute these inconsistencies to the amount of cognitive load that a person is required to maintain. Lower amounts of cognitive load increase distractor interference by orienting attention toward visually similar distractors. Higher amounts of cognitive load attenuate distractor interference by depleting attentional resources needed to process distractors. In the present study, cognitive load consisted of faces (Experiments 1-3) or scenes (Experiment 2). Participants performed a selective attention task in which they ignored face distractors while judging a color of a target dot presented nearby, under differing amounts of load. Across these experiments distractor interference was greater in the low-load condition and smaller in the high-load condition when the content of the cognitive load had similar visual characteristic to the distractors. We also found that when a series of judgments needed to be made, the effect was apparent for the first trial but not for the second. We further tested an involvement of working memory capacity (WMC) in the load effect (Experiment 3). Interestingly, both high and low WMC groups received an equivalent effect of the cognitive load in the first distractor, suggesting these effects are fairly automatic.

County-level poverty is equally associated with unmet health care needs in rural and urban settings.

PubMed

Peterson, Lars E; Litaker, David G

2010-01-01

Regional poverty is associated with reduced access to health care. Whether this relationship is equally strong in both rural and urban settings or is affected by the contextual and individual-level characteristics that distinguish these areas, is unclear. Compare the association between regional poverty with self-reported unmet need, a marker of health care access, by rural/urban setting. Multilevel, cross-sectional analysis of a state-representative sample of 39,953 adults stratified by rural/urban status, linked at the county level to data describing contextual characteristics. Weighted random intercept models examined the independent association of regional poverty with unmet needs, controlling for a range of contextual and individual-level characteristics. The unadjusted association between regional poverty levels and unmet needs was similar in both rural (OR = 1.06 [95% CI, 1.04-1.08]) and urban (OR = 1.03 [1.02-1.05]) settings. Adjusting for other contextual characteristics increased the size of the association in both rural (OR = 1.11 [1.04-1.19]) and urban (OR = 1.11 [1.05-1.18]) settings. Further adjustment for individual characteristics had little additional effect in rural (OR = 1.10 [1.00-1.20]) or urban (OR = 1.11 [1.01-1.22]) settings. To better meet the health care needs of all Americans, health care systems in areas with high regional poverty should acknowledge the relationship between poverty and unmet health care needs. Investments, or other interventions, that reduce regional poverty may be useful strategies for improving health through better access to health care. © 2010 National Rural Health Association.

Implications of privacy needs and interpersonal distancing mechanisms for space station design

NASA Technical Reports Server (NTRS)

Harrison, Albert A.; Sommer, Robert; Struthers, Nancy; Hoyt, Kathleen

1988-01-01

Isolation, confinement, and the characteristics of microgravity will accentuate the need for privacy in the proposed NASA space station, yet limit the mechanism available for achieving it. This study proposes a quantitative model for understanding privacy, interpersonal distancing, and performance, and discusses the practical implications for Space Station design. A review of the relevant literature provided the basis for a database, definitions of physical and psychological distancing, loneliness, and crowding, and a quantitative model of situational privacy. The model defines situational privacy (the match between environment and task), and focuses on interpersonal contact along visual, auditory, olfactory, and tactile dimensions. It involves summing across pairs of crew members, contact dimensions, and time, yet also permits separate analyses of subsets of crew members and contact dimensions. The study concludes that performance will benefit when the type and level of contact afforded by the environment align with that required by the task. The key to achieving this is to design a flexible, definable, and redefinable interior environment that provides occupants with a wide array of options to meet their needs for solitude, limited social interaction, and open group activity. The report presents 49 recommendations in five categories to promote a wide range of privacy options despite the space station's volumetric limitations.

Adaptation of a cubic smoothing spline algortihm for multi-channel data stitching at the National Ignition Facility

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brown, C; Adcock, A; Azevedo, S

2010-12-28

Some diagnostics at the National Ignition Facility (NIF), including the Gamma Reaction History (GRH) diagnostic, require multiple channels of data to achieve the required dynamic range. These channels need to be stitched together into a single time series, and they may have non-uniform and redundant time samples. We chose to apply the popular cubic smoothing spline technique to our stitching problem because we needed a general non-parametric method. We adapted one of the algorithms in the literature, by Hutchinson and deHoog, to our needs. The modified algorithm and the resulting code perform a cubic smoothing spline fit to multiple datamore » channels with redundant time samples and missing data points. The data channels can have different, time-varying, zero-mean white noise characteristics. The method we employ automatically determines an optimal smoothing level by minimizing the Generalized Cross Validation (GCV) score. In order to automatically validate the smoothing level selection, the Weighted Sum-Squared Residual (WSSR) and zero-mean tests are performed on the residuals. Further, confidence intervals, both analytical and Monte Carlo, are also calculated. In this paper, we describe the derivation of our cubic smoothing spline algorithm. We outline the algorithm and test it with simulated and experimental data.« less

A review of methodological factors in performance assessments of time-varying aircraft noise effects. [with annotated bibliography

NASA Technical Reports Server (NTRS)

Coates, G. D.; Alluisi, E. A.; Adkins, C. J., Jr.

1977-01-01

Literature on the effects of general noise on human performance is reviewed in an attempt to identify (1) those characteristics of noise that have been found to affect human performance; (2) those characteristics of performance most likely to be affected by the presence of noise, and (3) those characteristics of the performance situation typically associated with noise effects. Based on the characteristics identified, a theoretical framework is proposed that will permit predictions of possible effects of time-varying aircraft-type noise on complex human performance. An annotated bibliography of 50 articles is included.

Automated Verification of Spatial Resolution in Remotely Sensed Imagery

NASA Technical Reports Server (NTRS)

Davis, Bruce; Ryan, Robert; Holekamp, Kara; Vaughn, Ronald

2011-01-01

Image spatial resolution characteristics can vary widely among sources. In the case of aerial-based imaging systems, the image spatial resolution characteristics can even vary between acquisitions. In these systems, aircraft altitude, speed, and sensor look angle all affect image spatial resolution. Image spatial resolution needs to be verified with estimators that include the ground sample distance (GSD), the modulation transfer function (MTF), and the relative edge response (RER), all of which are key components of image quality, along with signal-to-noise ratio (SNR) and dynamic range. Knowledge of spatial resolution parameters is important to determine if features of interest are distinguishable in imagery or associated products, and to develop image restoration algorithms. An automated Spatial Resolution Verification Tool (SRVT) was developed to rapidly determine the spatial resolution characteristics of remotely sensed aerial and satellite imagery. Most current methods for assessing spatial resolution characteristics of imagery rely on pre-deployed engineered targets and are performed only at selected times within preselected scenes. The SRVT addresses these insufficiencies by finding uniform, high-contrast edges from urban scenes and then using these edges to determine standard estimators of spatial resolution, such as the MTF and the RER. The SRVT was developed using the MATLAB programming language and environment. This automated software algorithm assesses every image in an acquired data set, using edges found within each image, and in many cases eliminating the need for dedicated edge targets. The SRVT automatically identifies high-contrast, uniform edges and calculates the MTF and RER of each image, and when possible, within sections of an image, so that the variation of spatial resolution characteristics across the image can be analyzed. The automated algorithm is capable of quickly verifying the spatial resolution quality of all images within a data set, enabling the appropriate use of those images in a number of applications.

Preliminary Figures of Merit for Isotope Ratio Measurements: The Liquid Sampling-Atmospheric Pressure Glow Discharge Microplasma Ionization Source Coupled to an Orbitrap Mass Analyzer

NASA Astrophysics Data System (ADS)

Hoegg, Edward D.; Barinaga, Charles J.; Hager, George J.; Hart, Garret L.; Koppenaal, David W.; Marcus, R. Kenneth

2016-08-01

In order to meet a growing need for fieldable mass spectrometer systems for precise elemental and isotopic analyses, the liquid sampling-atmospheric pressure glow discharge (LS-APGD) has a number of very promising characteristics. One key set of attributes that await validation deals with the performance characteristics relative to isotope ratio precision and accuracy. Owing to its availability and prior experience with this research team, the initial evaluation of isotope ratio (IR) performance was performed on a Thermo Scientific Exactive Orbitrap instrument. While the mass accuracy and resolution performance for Orbitrap analyzers are well-documented, no detailed evaluations of the IR performance have been published. Efforts described here involve two variables: the inherent IR precision and accuracy delivered by the LS-APGD microplasma and the inherent IR measurement qualities of Orbitrap analyzers. Important to the IR performance, the various operating parameters of the Orbitrap sampling interface, high-energy collisional dissociation (HCD) stage, and ion injection/data acquisition have been evaluated. The IR performance for a range of other elements, including natural, depleted, and enriched uranium isotopes was determined. In all cases, the precision and accuracy are degraded when measuring low abundance (<0.1% isotope fractions). In the best case, IR precision on the order of 0.1% RSD can be achieved, with values of 1%-3% RSD observed for low-abundance species. The results suggest that the LS-APGD is a promising candidate for field deployable MS analysis and that the high resolving powers of the Orbitrap may be complemented with a here-to-fore unknown capacity to deliver high-precision IRs.

Before and after retrofit - response of a building during ambient and strong motions

USGS Publications Warehouse

Celebi, M.; Liu, Huaibao P.; ,

1998-01-01

This paper presents results obtained from ambient vibration and strong-motion responses of a thirteen-story, moment-resisting steel framed Santa Clara County Office Building (SCCOB) before being retrofitted by visco-elastic dampers and from ambient vibration response following the retrofit. Understanding the cumulative structural and site characteristics that affect the response of SCCOB before and after the retrofit is important in assessing earthquake hazards to other similar buildings and decision making in retrofitting them. The results emphasize the need to better evaluate structural and site characteristics in developing earthquake resisting designs that avoid resonating effects. Various studies of the strong-motion response records from the SCCOB during the 24 April 1984 (MHE) Morgan Hill (MS = 6.1), the 31 March 1986 (MLE) Mt. Lewis (MS = 6.1) and the 17 October 1989 (LPE) Loma Prieta (MS = 7.1) earthquakes show that the dynamic characteristics of the building are such that it (a) resonated (b) responded with a beating effect due to close-coupling of its translational and torsional frequencies, and (c) had a long-duration response due to low-damping. During each of these earthquakes, there was considerable contents damage and the occupants felt the rigorous vibration of the building. Ambient tests of SCCOB performed following LPE showed that both translational and torsional periods of the building are smaller than those derived from strong motions. Ambient tests performed following the retrofit of the building with visco-elastic dampers show that the structural fundamental mode frequency of the building has increased. The increased frequency implies a stiffer structure. Strong-motion response of the building during future earthquakes will ultimately validate the effectiveness of the retrofit method.This paper presents results obtained from ambient vibration and strong-motion responses of a thirteen-story, moment-resisting steel framed Santa Clara County Office Building (SCCOB) before being retrofitted by visco-elastic dampers and from ambient vibration response following the retrofit. Understanding the cumulative structural and site characteristics that affect the response of SCCOB before and after the retrofit is important in assessing earthquake hazards to other similar buildings and decision making in retrofitting them. The results emphasize the need to better evaluate structural and site characteristics in developing earthquake resisting designs that avoid resonating effects. Various studies of the strong-motion response records from the SCCOB during the 24 April 1984 (MHE) Morgan Hill (Ms = 6.1), the 31 March 1986 (MLE) Mt. Lewis (Ms = 6.1) and the 17 October 1989(LPE) Loma Prieta (Ms = 7.1) earthquakes show that the dynamic characteristics of the building are such that it (a) resonated (b) responded with a beating effect due to close-coupling of its translational and torsional frequencies, and (c) had a long-duration response due to low-damping. During each of these earthquakes, there was considerable contents damage and the occupants felt the rigorous vibration of the building. Ambient tests of SCCOB performed following LPE showed that both translational and torsional periods of the building are smaller than those derived from strong motions. Ambient tests performed following the retrofit of the building with visco-elastic dampers show that the structural fundamental mode frequency of the building has increased. The increased frequency implies a stiffer structure. Strong-motion response of the building during future earthquakes will ultimately validate the effectiveness of the retrofit method.

Factors associated with enrollment, satisfaction, and sustainability of the New Cooperative Medical Scheme program in six study areas in rural Beijing.

PubMed

Wang, Hongman; Gu, Danan; Dupre, Matthew Egan

2008-01-01

This study examines the factors associated with the enrollment, satisfaction, and sustainability of the New Cooperative Medical Scheme (NCMS) program in six study areas in rural Beijing. Data come from a sample of 890 persons aged 15-88 from 890 households who were randomly interviewed from six rural counties/districts in Beijing. Findings from multi-level models indicate that gender, socioeconomic status, adequate knowledge about the policy, subjective premium contribution, subjective co-payment rates, and need are significantly associated with enrollment. We further find that the sustainability of the NCMS program is only significantly related to knowledge about the policy and satisfaction with the overall performance of the program. The NCMS program should be further promoted through different media avenues. It is also necessary to expand the types of services to include basic medical care and other specialized services to meet the different needs of the rural population. In addition, supervision of the system's performance should be enhanced and characteristics of the local community should be considered in the implementation of the NCMS.

A high-temperature furnace for applications in microgravity

NASA Technical Reports Server (NTRS)

1991-01-01

Technology in the area of material processing and crystal growth has been greatly furthered by research in microgravity environments. The role of efficient, lightweight furnaces with reliable performance is crucial in these experiments. A need exists for the development of a readily duplicated, high-temperature furnace satisfying stringent weight, volume, and power constraints. A furnace was designed and is referred to as the UAH SHIELD. Stringent physical and operating characteristics for the system were specified, including a maximum weight of 20 kg, a maximum power requirement of 60 W, and a volume of the furnace assembly, excluding the batteries, limited to half a Get-Away-Special canister. The UAH SHIELD furnace uses radiation shield and vacuum technology applied in the form of a series of concentric cylinders enclosed on either end with disks. Thermal testing of a furnace prototype was performed in addition to some thermal and structural analysis. Results indicate the need for spacing of the shields to accommodate the thermal expansion during furnace operation. In addition, a power dissipation of approximately 100 W and system weight of approximately 30 kg was found for the current design.

NASA Educational Product Development and Post-Secondary Program Assessment Planning

NASA Technical Reports Server (NTRS)

Salmons, Phyllis A.

1999-01-01

Producing "value-added students" involves proactively addressing how successfully students develop their skills, knowledge, and personal, social, and ethical growth due to their association with a program. NASA programs for higher education can certainly be responsive in aiding the academic community strive for quality in terms of "valueadded" students. By identifying essential characteristics of exemplary assessment practices, the standards developed by accrediting agencies serve as guides for developing quality practices and policies. Such a process is an effective tool for communicating the expectations of the educational components of a program to all concerned with the program and its expected results. When standards are connected to student performance, they provide a very compelling argument for refocusing the definition of quality in higher education. By linking standards and performance, student learning and development becomes the starting point for examining program quality. If the multiple stakeholders - faculty, peers, the professional community, addressed assessment issues, then accreditation can be a link among various constituencies, the parties can better understand the needs of each other and develop the necessary trust needed for understanding and support.

Human-Robot Interaction in High Vulnerability Domains

NASA Technical Reports Server (NTRS)

Gore, Brian F.

2016-01-01

Future NASA missions will require successful integration of the human with highly complex systems. Highly complex systems are likely to involve humans, automation, and some level of robotic assistance. The complex environments will require successful integration of the human with automation, with robots, and with human-automation-robot teams to accomplish mission critical goals. Many challenges exist for the human performing in these types of operational environments with these kinds of systems. Systems must be designed to optimally integrate various levels of inputs and outputs based on the roles and responsibilities of the human, the automation, and the robots; from direct manual control, shared human-robotic control, or no active human control (i.e. human supervisory control). It is assumed that the human will remain involved at some level. Technologies that vary based on contextual demands and on operator characteristics (workload, situation awareness) will be needed when the human integrates into these systems. Predictive models that estimate the impact of the technologies on the system performance and the on the human operator are also needed to meet the challenges associated with such future complex human-automation-robot systems in extreme environments.

[HUMAN RESOURCES MANAGEMENT BASED ON COMPETENCIES].

PubMed

Larumbe Andueza, Ma Carmen; De Mendoza Cánton, Juana Hermoso

2016-05-01

We are living in a time with a lot of changes in which health organizations have more challenges to face. One of them is to recognize, strengthen, develop and retain the talent they have. Competency-based human resources management is emerging as a tool that contributes to achieve that aim. Competencies from the generic or characteristic perspective: personality traits, values and motivations, which are deeply rooted in the person. Through elaborating a competencies map for the organization, and identifying the job competencies profile, above all in key jobs, the employees know what it is going to expect from them. After, detect and cover the learning needs, it is possible to achieve better adjust between worker-job. The nursing unit manager is a key job because it is a link between management team and nursing team. The way that it is performed, it will have impact on the quality of care and its team motivation. So, the most adequate person who covers this job would have a part of knowledge, skills, attitudes and compatible interests with her job. Competency-based management helps identify both the potential and learning needs to performing this job.

Assessing the capacity of social determinants of health data to augment predictive models identifying patients in need of wraparound social services.

PubMed

Kasthurirathne, Suranga N; Vest, Joshua R; Menachemi, Nir; Halverson, Paul K; Grannis, Shaun J

2018-01-01

A growing variety of diverse data sources is emerging to better inform health care delivery and health outcomes. We sought to evaluate the capacity for clinical, socioeconomic, and public health data sources to predict the need for various social service referrals among patients at a safety-net hospital. We integrated patient clinical data and community-level data representing patients' social determinants of health (SDH) obtained from multiple sources to build random forest decision models to predict the need for any, mental health, dietitian, social work, or other SDH service referrals. To assess the impact of SDH on improving performance, we built separate decision models using clinical and SDH determinants and clinical data only. Decision models predicting the need for any, mental health, and dietitian referrals yielded sensitivity, specificity, and accuracy measures ranging between 60% and 75%. Specificity and accuracy scores for social work and other SDH services ranged between 67% and 77%, while sensitivity scores were between 50% and 63%. Area under the receiver operating characteristic curve values for the decision models ranged between 70% and 78%. Models for predicting the need for any services reported positive predictive values between 65% and 73%. Positive predictive values for predicting individual outcomes were below 40%. The need for various social service referrals can be predicted with considerable accuracy using a wide range of readily available clinical and community data that measure socioeconomic and public health conditions. While the use of SDH did not result in significant performance improvements, our approach represents a novel and important application of risk predictive modeling. © The Author 2017. Published by Oxford University Press on behalf of the American Medical Informatics Association. All rights reserved. For Permissions, please email: journals.permissions@oup.com

[Gap between the use of and need for youth care: research in Rotterdam neighbourhoods].

PubMed

Jansen, Wilma; Mieloo, Cathelijne L; Anschutz, Justine; de Zwart, Onno

2015-01-01

To determine the relationship between the need for care and the use of care in the youth care system at neighbourhood level and the relationship with population characteristics, with consideration of the decentralisation of youth care. Descriptive, retrospective study. Data on youth care use, indicators of need for care and population characteristics were gathered from monitors and the records of the municipality, institutions and health insurance companies. Data were grouped on a neighbourhood level (n = 49). For the analyses we used univariate and multivariate regression. We used these to distinguish between neighbourhoods with large and small gaps between youth care use and need for youth care. Differences between these neighbourhoods were analysed with t-tests. A multivariate model showed that the percentage of youths with emotional problems and behavioural problems and the percentage of parents with self-reported need for care were not predictors of youth care use at a neighbourhood level. About two thirds of the variance in youth care use between neighbourhoods could be explained by the population characteristics of a neighbourhood, particularly the percentage of youths originally from non-western countries, the percentage of youths with a low level of education or special training and the percentage of people who received income support. The number of 12-18-year-olds in a neighbourhood was a predictor of youth mental health care, and the percentage of youths in a single-parent family was a predictor of out-patient youth and parenting support. Neighbourhoods with a large gap between the need for and use of youth care were socially more disadvantaged than neighbourhoods with a smaller gap. Population characteristics explain the rate of use of youth care better than the need for youth care in a neighbourhood as measured by municipal monitors. The possible gap between the use of and need for youth care on an individual level in neighbourhoods with many characteristics of disadvantage is an important focus point for future neighbourhood teams.

Clicker Score Trajectories and Concept Inventory Scores as Predictors for Early Warning Systems for Large STEM Classes

NASA Astrophysics Data System (ADS)

Lee, Un Jung; Sbeglia, Gena C.; Ha, Minsu; Finch, Stephen J.; Nehm, Ross H.

2015-12-01

Increasing the retention of STEM (science, technology, engineering, and mathematics) majors has recently emerged as a national priority in undergraduate education. Since poor performance in large introductory science and math courses is one significant factor in STEM dropout, early detection of struggling students is needed. Technology-supported "early warning systems" (EWSs) are being developed to meet these needs. Our study explores the utility of two commonly collected data sources—pre-course concept inventory scores and longitudinal clicker scores—for use in EWS, specifically, in determining the time points at which robust predictions of student success can first be established. The pre-course diagnostic assessments, administered to 287 students, included two concept inventories and one attitude assessment. Clicker question scores were also obtained for each of the 37 class sessions. Additionally, student characteristics (sex, ethnicity, and English facility) were gathered in a survey. Our analyses revealed that all variables were predictive of final grades. The correlation of the first 3 weeks of clicker scores with final grades was 0.53, suggesting that this set of variables could be used in an EWS starting at the third week. We also used group-based trajectory models to assess whether trajectory patterns were homogeneous in the class. The trajectory analysis identified three distinct clicker performance patterns that were also significant predictors of final grade. Trajectory analyses of clicker scores, student characteristics, and pre-course diagnostic assessment appear to be valuable data sources for EWS, although further studies in a diversity of instructional contexts are warranted.

Structural design and performance of a rear support walking frame.

PubMed

Woollam, P J; Miller, K; McLeod, N; Batty, D; Stallard, J

2002-01-01

Rear support walking frames provide predetermined vertical support for patients with dysfunctional lower limbs that have limited active control; the support is provided through a spring-loaded boom hinged on an upright stanchion mounted at the rear of a wheeled frame within which the patient ambulates. The application of these frames for total-body-involved cerebral palsy patients, in combination with a walking orthosis, has highlighted a number of practical problems that need to be addressed for the system to become fully viable. A composite material prototype walking frame has been developed that permits the patient to be transferred by a single carer without the need to use inappropriate manual handling techniques. The frame has improved structural properties, with stiffness in the sagittal and coronal planes increasing by between 50 and 100 per cent. Evaluation with patients showed that the greater structural stiffness permitted the objective of improved continuity of walking to be achieved. The strength of the frame is such that it can accommodate patients of up to 80 kg, more than twice that possible in the earlier system. Since the structural yield point is approximately twice the maximum working load, the device should not be prone to unacceptable fatigue characteristics. Despite the use of carbon composite materials (which have brittle failure characteristics), the mode of failure is of progressive collapse and is therefore inherently safe. The successful outcome of prototype testing has justified production development. Work is now proceeding on a design that incorporates further improvements in structural performance and ease of manufacture.

Computational Intelligence and Game Design for Effective At-Home Stroke Rehabilitation.

PubMed

Borghese, Nunzio Alberto; Pirovano, Michele; Lanzi, Pier Luca; Wüest, Seline; de Bruin, Eling D

2013-04-01

The aim of this article is to describe a game engine that has all the characteristics needed to support rehabilitation at home. The low-cost tracking devices recently introduced in the entertainment market allow measuring reliably at home, in real time, players' motion with a hands-free approach. Such systems have also become a source of inspiration for researchers working in rehabilitation. Computer games appear suited to guide rehabilitation because of their ability to engage the users. However, commercial videogames and game engines lack the peculiar functionalities required in rehabilitation: Games should be adapted to each patient's functional status, and monitoring the patient's motion is mandatory to avoid maladaptation. Feedback on performance and progression of the exercises should be provided. Lastly, several tracking devices should be considered, according to the patient's pathology and rehabilitation aims. We have analyzed the needs of the clinicians and of the patients associated in performing rehabilitation at home, identifying the characteristics that the game engine should have. The result of this analysis has led us to develop the Intelligent Game Engine for Rehabilitation (IGER) system, which combines the principles upon which commercial games are designed with the needs of rehabilitation. IGER is heavily based on computational intelligence: Adaptation of the difficulty level of the exercise is carried out through a Bayesian framework from the observation of the patient's success rate. Monitoring is implemented in fuzzy systems and based on rules defined for the exercises by clinicians. Several devices can be attached to IGER through an input abstraction layer, like the Nintendo ® (Kyoto, Japan) Wii™ Balance Board™, the Microsoft ® (Redmond, WA) Kinect, the Falcon from Novint Technologies (Albuquerque, NM), or the Tyromotion (Graz, Austria) Timo ® plate balance board. IGER is complemented with videogames embedded in a specific taxonomy developed to support rehabilitation progression through time. A few games aimed at postural rehabilitation have been designed and developed to test the functionalities of the IGER system. The preliminary results of tests on normal elderly people and patients with the supervision of clinicians have shown that the IGER system indeed does feature the characteristics required to support rehabilitation at home and that it is ready for clinical pilot testing at patients' homes.

Computational Intelligence and Game Design for Effective At-Home Stroke Rehabilitation

PubMed Central

Pirovano, Michele; Lanzi, Pier Luca; Wüest, Seline; de Bruin, Eling D.

2013-01-01

Abstract Objective The aim of this article is to describe a game engine that has all the characteristics needed to support rehabilitation at home. The low-cost tracking devices recently introduced in the entertainment market allow measuring reliably at home, in real time, players' motion with a hands-free approach. Such systems have also become a source of inspiration for researchers working in rehabilitation. Computer games appear suited to guide rehabilitation because of their ability to engage the users. However, commercial videogames and game engines lack the peculiar functionalities required in rehabilitation: Games should be adapted to each patient's functional status, and monitoring the patient's motion is mandatory to avoid maladaptation. Feedback on performance and progression of the exercises should be provided. Lastly, several tracking devices should be considered, according to the patient's pathology and rehabilitation aims. Subjects and Methods We have analyzed the needs of the clinicians and of the patients associated in performing rehabilitation at home, identifying the characteristics that the game engine should have. Results The result of this analysis has led us to develop the Intelligent Game Engine for Rehabilitation (IGER) system, which combines the principles upon which commercial games are designed with the needs of rehabilitation. IGER is heavily based on computational intelligence: Adaptation of the difficulty level of the exercise is carried out through a Bayesian framework from the observation of the patient's success rate. Monitoring is implemented in fuzzy systems and based on rules defined for the exercises by clinicians. Several devices can be attached to IGER through an input abstraction layer, like the Nintendo® (Kyoto, Japan) Wii™ Balance Board™, the Microsoft® (Redmond, WA) Kinect, the Falcon from Novint Technologies (Albuquerque, NM), or the Tyromotion (Graz, Austria) Timo® plate balance board. IGER is complemented with videogames embedded in a specific taxonomy developed to support rehabilitation progression through time. Conclusions A few games aimed at postural rehabilitation have been designed and developed to test the functionalities of the IGER system. The preliminary results of tests on normal elderly people and patients with the supervision of clinicians have shown that the IGER system indeed does feature the characteristics required to support rehabilitation at home and that it is ready for clinical pilot testing at patients' homes. PMID:24761321

The Statistical Loop Analyzer (SLA)

NASA Technical Reports Server (NTRS)

Lindsey, W. C.

1985-01-01

The statistical loop analyzer (SLA) is designed to automatically measure the acquisition, tracking and frequency stability performance characteristics of symbol synchronizers, code synchronizers, carrier tracking loops, and coherent transponders. Automated phase lock and system level tests can also be made using the SLA. Standard baseband, carrier and spread spectrum modulation techniques can be accomodated. Through the SLA's phase error jitter and cycle slip measurements the acquisition and tracking thresholds of the unit under test are determined; any false phase and frequency lock events are statistically analyzed and reported in the SLA output in probabilistic terms. Automated signal drop out tests can be performed in order to trouble shoot algorithms and evaluate the reacquisition statistics of the unit under test. Cycle slip rates and cycle slip probabilities can be measured using the SLA. These measurements, combined with bit error probability measurements, are all that are needed to fully characterize the acquisition and tracking performance of a digital communication system.

Unobtrusive measures in behavioral assessment

PubMed Central

Kazdin, Alan E.

1979-01-01

A major distinguishing characteristic of behavioral assessment is the direct assessment of overt behavior. Direct assessment is assumed to provide a sample of behavior that reflects client performance in the situation in which behavior is assessed, even if the assessment procedures were not implemented. Yet, in the majority of investigations, behavioral assessment procedures are obtrusive, i.e., subjects are aware that their behavior is being assessed. The potential problem with obtrusive assessment is that it may be reactive, i.e., affect how subjects perform. Recent research has demonstrated that obtrusive observations often are reactive and that behaviors assessed under obtrusive and unobtrusive conditions bear little relation. From methodological and applied perspectives, additional attention needs to be given to unobtrusive measures of behavior change. The present paper illustrates unobtrusive measures in behavior modification including direct observations, archival records, and physical traces of performance. In addition, validation and assessment problems, questions about the obtrusiveness of the measures, and ethical issues are discussed. PMID:16795622

Water-Based Pressure Sensitive Paint

NASA Technical Reports Server (NTRS)

Oglesby, Donald M.; Ingram, JoAnne L.; Jordan, Jeffrey D.; Watkins, A. Neal; Leighty, Bradley D.

2004-01-01

Preparation and performance of a water-based pressure sensitive paint (PSP) is described. A water emulsion of an oxygen permeable polymer and a platinum porphyrin type luminescent compound were dispersed in a water matrix to produce a PSP that performs well without the use of volatile, toxic solvents. The primary advantages of this PSP are reduced contamination of wind tunnels in which it is used, lower health risk to its users, and easier cleanup and disposal. This also represents a cost reduction by eliminating the need for elaborate ventilation and user protection during application. The water-based PSP described has all the characteristics associated with water-based paints (low toxicity, very low volatile organic chemicals, and easy water cleanup) but also has high performance as a global pressure sensor for PSP measurements in wind tunnels. The use of a water-based PSP virtually eliminates the toxic fumes associated with the application of PSPs to a model in wind tunnels.

Solid motor diagnostic instrumentation. [design of self-contained instrumentation

NASA Technical Reports Server (NTRS)

Nakamura, Y.; Arens, W. E.; Wuest, W. S.

1973-01-01

A review of typical surveillance and monitoring practices followed during the flight phases of representative solid-propellant upper stages and apogee motors was conducted to evaluate the need for improved flight diagnostic instrumentation on future spacecraft. The capabilities of the flight instrumentation package were limited to the detection of whether or not the solid motor was the cause of failure and to the identification of probable primary failure modes. Conceptual designs of self-contained flight instrumentation packages capable of meeting these reqirements were generated and their performance, typical cost, and unit characteristics determined. Comparisons of a continuous real time and a thresholded hybrid design were made on the basis of performance, mass, power, cost, and expected life. The results of this analysis substantiated the feasibility of a self-contained independent flight instrumentation module as well as the existence of performance margins by which to exploit growth option applications.

An examination of presenteeism measures: the association of three scoring methods with health, work life, and consumer activation.

PubMed

Terry, Paul E; Xi, Min

2010-12-01

The objective of this study was to assess the validity of 3 scoring techniques for presenteeism measures by exploring their relationship with patient activation, health, job satisfaction, and socioeconomic characteristics. The sample consisted of 631 employees from 2 predominantly white-collar employee groups in the northern Midwest. Employees completed the World Health Organization's Health and Work Performance Questionnaire, a wellness profile, and the Patient Activation Measure. Absolute measures reflect self-rated performance, while relative and stratified measures compare self-rated performance to that of co-workers. Multivariate analyses were used to validate scoring measures. All measures of presenteeism were positively correlated with being nonwhite, income, and smoking. The significance of age, employment, mental health, and patient activation depends on how presenteeism is defined. Practitioners must carefully consider which scoring method best addresses their program goals and objectives. Clearer measurement guidelines are needed.

A flight test of laminar flow control leading-edge systems

NASA Technical Reports Server (NTRS)

Fischer, M. C.; Wright, A. S., Jr.; Wagner, R. D.

1983-01-01

NASA's program for development of a laminar flow technology base for application to commercial transports has made significant progress since its inception in 1976. Current efforts are focused on development of practical reliable systems for the leading-edge region where the most difficult problems in applying laminar flow exist. Practical solutions to these problems will remove many concerns about the ultimate practicality of laminar flow. To address these issues, two contractors performed studies, conducted development tests, and designed and fabricated fully functional leading-edge test articles for installation on the NASA JetStar aircraft. Systems evaluation and performance testing will be conducted to thoroughly evaluate all system capabilities and characteristics. A simulated airline service flight test program will be performed to obtain the operational sensitivity, maintenance, and reliability data needed to establish that practical solutions exist for the difficult leading-edge area of a future commercial transport employing laminar flow control.

Irreversible and endoreversible behaviors of the LD-model for heat devices: the role of the time constraints and symmetries on the performance at maximum χ figure of merit

NASA Astrophysics Data System (ADS)

Gonzalez-Ayala, Julian; Calvo Hernández, A.; Roco, J. M. M.

2016-07-01

The main unified energetic properties of low dissipation heat engines and refrigerator engines allow for both endoreversible or irreversible configurations. This is accomplished by means of the constraints imposed on the characteristic global operation time or the contact times between the working system with the external heat baths and modulated by the dissipation symmetries. A suited unified figure of merit (which becomes power output for heat engines) is analyzed and the influence of the symmetries on the optimum performance discussed. The obtained results, independent on any heat transfer law, are faced with those obtained from Carnot-like heat models where specific heat transfer laws are needed. Thus, it is shown that only the inverse phenomenological law, often used in linear irreversible thermodynamics, correctly reproduces all optimized values for both the efficiency and coefficient of performance values.

Orientation and mobility training for adults with low vision.

PubMed

Virgili, G; Rubin, G

2006-07-19

Orientation and mobility (O&M) training is provided to people who are visually impaired to help them maintain travel independence. It teaches them new orientation and mobility skills to compensate for reduced visual information. The objective of this review was to assess the effects of (O&M) training, with or without associated devices, for adults with low vision. We searched the Cochrane Central Register of Controlled Trials (CENTRAL) (which contains the Cochrane Eyes and Vision Group Trials Register) in The Cochrane Library, MEDLINE, SIGLE, EMBASE, National Research Register, Zetoc, LILACS, and the reference lists of articles. Updated searches were in 2006. We planned to include randomised or quasi-randomised trials comparing (O&M) training with no training in adults with low vision. Two authors independently assessed the search results for eligibility, evaluated study quality and extracted the data. Two small studies satisfied the inclusion criteria. They were consecutive phases of development of the same training curriculum and assessment tool. The intervention was administered by a volunteer on the basis of written and oral instruction. In both studies the randomisation technique was inadequate, being based on alternation, and masking was not achieved. Training had no effect in the first study while it was found to be beneficial in the second. Reasons for this may have been: the high scores obtained in the first study, suggestive of little need for training and small room for further improvement (a ceiling effect), and the refinement of the curriculum allowing better tailoring to patients' specific needs and characteristics, in the second study. The review found two small trials with similar methods, comparing (O&M) training to physical exercise, which were unable to demonstrate a difference. Therefore, there is little evidence on which type of orientation and mobility training is better for people with low vision who have specific characteristics and needs. Orientation and mobility instructors and scientists should plan randomised controlled studies to compare the effectiveness of different types of (O&M) training. A consensus is needed on the adoption of standard measurement instruments of mobility performance which are proved to be reliable and sensitive to the diverse mobility needs of people with low vision. For this purpose, questionnaires and performance-based tests may represent different tools that explore people with low vision's subjective experience or their objective functioning, respectively.

[Development of photothermal microactuator based on spectral analysis of photothermal expansion material].

PubMed

Liu, Chao; Zhang, Dong-Xian; Zhang, Hai-Jun

2009-11-01

The spectral characteristic of materials is the key factor of the photothermal microactuator's performance. The present article introduces the operating principle, and analyzes the relationship between the material spectral characteristic and its expansion. As the photothermal microactuator is an innovative microactuator based on photothermal expansion that absorbs the laser energy and converts it into internal energy to realize the microdrive, the optimal photothermal expansion material with proper absorption spectrum characteristic matching the spectrum of light driving source needs to be found. The reflection and absorption spectra of four types of polymeric material, including PVC, HDPE, LDPE and PET, were obtained by using the single integrating sphere method. The results indicate that the reflection spectrum of the dyed high-density polyethylene (HDPE) is of double-peak structure in visible band, and there is strong absorption within the range of 600-690 nm, which means it would match the light driving source quite well in the broad spectral range. Therefore, HDPE was chosen as the photothermal expansion material. In order to check out the feasibility and performance of the photothermal microactuactor based on HDPE, a prototyping microactuator 1 500 mm in length and 30 mm in thickness was manufactured by using an excimer laser micromachining system. With a laser diode (10 mW/650 nm) as the external power source to activate the microactuator, performance measurement experiments were carried out by using a self-produced video movement measurement system with a CCD-coupled microscope. The experiment results demonstrate that the deflection of the microactuator reaches 18.7 mm at 10 mW of laser power, showing that the characteristics of spectral absorption and light-heat transition are quite well at 650 nm. This novel photothermal microactuator has simple structure, adjustable displacement output, and more mobility, and can be controlled remotely, so it will be quite useful for applications in the fields of micro-optical-electro-mechanical systems (MOEMS).

Residents in difficulty: a mixed methods study on the prevalence, characteristics, and sociocultural challenges from the perspective of residency program directors.

PubMed

Christensen, Mette K; O'Neill, Lotte; Hansen, Dorthe H; Norberg, Karen; Mortensen, Lene S; Charles, Peder

2016-02-22

The majority of studies on prevalence and characteristics of residents in difficulty have been conducted in English-speaking countries and the existing literature may not reflect the prevalence and characteristics of residents in difficulty in other parts of the world such as the Scandinavian countries, where healthcare systems are slightly different. The aim of this study was to examine prevalence and characteristics of residents in difficulty in one out of three postgraduate medical training regions in Denmark, and to produce both a quantifiable overview and in-depth understanding of the topic. We performed a mixed methods study. All regional residency program directors (N = 157) were invited to participate in an e-survey about residents in difficulty. Survey data were combined with database data on demographical characteristics of the background population (N = 2399) of residents, and analyzed statistically (Chi-squared test (Χ (2)) or Fisher's exact test). Secondly, we performed a qualitative interview study involving three focus group interviews with residency program directors. The analysis of the interview data employed qualitative content analysis. 73.2 % of the residency program directors completed the e-survey and 22 participated in the focus group interviews. The prevalence of residents in difficulty was 6.8 %. We found no statistically significant differences in the prevalence of residents in difficulty by gender and type of specialty. The results also showed two important themes related to the workplace culture of the resident in difficulty: 1) belated and inconsistent feedback on the resident's inadequate performance, and 2) the perceived culturally rooted priority of efficient patient care before education in the workplace. These two themes were emphasized by the program directors as the primary underlying causes of the residents' difficulty. More work is needed in order to clarify the link between, on the one hand, observable markers of residents in difficulty and, on the other hand, immanent processes and logics of practice in a healthcare system. From our perspective, further sociological and pedagogical investigations in educational cultures across settings and specialties could inform our understanding of and knowledge about pitfalls in residents' and doctors' socialization into the healthcare system.

The Indochinese Mutual Assistance Associations: Characteristics, Composition, Capacity Building Needs and Future Directions.

ERIC Educational Resources Information Center

Bui, Diana D.; And Others

The results of an informal survey of the characteristics, composition, capacity building needs and future directions of sixty Cambodian, Laotian and Vietnamese Mutual Assistance Associations (MAAs) are documented in this report. Included among the survey findings are the purposes, current achievements, and future goals of the associations,…

Do Preferences for Job Attributes Provide Evidence of "Hierarchy of Needs"?

ERIC Educational Resources Information Center

Baslevent, Cem; Kirmanoglu, Hasan

2013-01-01

We examine whether employees' preferences for various job attributes are associated with their individual characteristics in ways that are in line with "hierarchy of needs" theories. Using data from the fifth round of the European Social Survey, we observe the influence of socio-demographic and dispositional characteristics as well as…

Developmental Characteristics of Middle Schoolers and Middle School Organization.

ERIC Educational Resources Information Center

Thornburg, Hershel D.

The extent to which the middle school becomes a true educational alternative is directly related to the ability of middle school educators and researchers to identify and investigate the developmental needs and learning capacities of students. Three important developmental characteristics of early adolescents are a high need for peer friendships,…

Emotional, physical, and social needs among 0-5-year-old children displaced by the 2010 Chilean earthquake: associated characteristics and exposures.

PubMed

Arbour, MaryCatherine; Murray, Kara A; Yoshikawa, Hirokazu; Arriet, Felipe; Moraga, Cecilia; Vega, Miguel Angel Cordero

2017-04-01

An 8.8-magnitude earthquake occurred off the coast of Chile on 27 February 2010, displacing nearly 2,000 children aged less than five years to emergency housing camps. Nine months later, this study assessed the needs of 140 displaced 0-5-year-old children in six domains: caregiver stability and protection; health; housing; nutrition; psychosocial situation; and stimulation. Multivariate regression was applied to examine the degree to which emotional, physical, and social needs were associated with baseline characteristics and exposure to the earthquake, to stressful events, and to ongoing risks in the proximal post-earthquake context. In each domain, 20 per cent or fewer children had unmet needs. Of all children in the sample, 20 per cent had unmet needs in multiple domains. Children's emotional, physical, and social needs were associated with ongoing exposures amenable to intervention, more than with baseline characteristics or epicentre proximity. Relief efforts should address multiple interrelated domains of child well-being and ongoing risks in post-disaster settings. © 2017 The Author(s). Disasters © Overseas Development Institute, 2017.

GaSb thermophotovoltaic cells grown on GaAs by molecular beam epitaxy using interfacial misfit arrays

DOE Office of Scientific and Technical Information (OSTI.GOV)

Juang, Bor-Chau, E-mail: bcjuang@ucla.edu; Laghumavarapu, Ramesh B.; Foggo, Brandon J.

There exists a long-term need for foreign substrates on which to grow GaSb-based optoelectronic devices. We address this need by using interfacial misfit arrays to grow GaSb-based thermophotovoltaic cells directly on GaAs (001) substrates and demonstrate promising performance. We compare these cells to control devices grown on GaSb substrates to assess device properties and material quality. The room temperature dark current densities show similar characteristics for both cells on GaAs and on GaSb. Under solar simulation the cells on GaAs exhibit an open-circuit voltage of 0.121 V and a short-circuit current density of 15.5 mA/cm{sup 2}. In addition, the cells on GaAsmore » substrates maintain 10% difference in spectral response to those of the control cells over a large range of wavelengths. While the cells on GaSb substrates in general offer better performance than the cells on GaAs substrates, the cost-savings and scalability offered by GaAs substrates could potentially outweigh the reduction in performance. By further optimizing GaSb buffer growth on GaAs substrates, Sb-based compound semiconductors grown on GaAs substrates with similar performance to devices grown directly on GaSb substrates could be realized.« less

Fitness characteristics of a suburban special weapons and tactics team.

PubMed

Pryor, Riana R; Colburn, Deanna; Crill, Matthew T; Hostler, David P; Suyama, J

2012-03-01

Special Weapons and Tactics (SWAT) operators are specialized law enforcement officers who traditionally perform their duties with higher anticipated workloads because of additional body armor, weapons, and equipment used for enhanced operations and protection. This elevated workload increases the need for SWAT operators to improve or maintain their physical fitness to consistently perform routine operations. Typical tasks require trunk rotation, overhead upper extremity use, upper and lower body strength use, and long waiting periods followed by explosive movements while wearing additional equipment. Eleven male SWAT operators from 1 SWAT team performed flexibility, strength, power, and aerobic capacity tests and a variety of job-related tasks. Data were compared with age- and gender-based normative data. Fitness testing revealed that officers ranked high on tests of muscular strength (leg strength, 90th percentile; bench press, 85th percentile); however, body composition (55th percentile), core body strength, and flexibility ranked lower. Furthermore, aerobic capacity and muscular power had a wide range of scores and were also not ideal to support maximal performance during routine operations. These data can assist exercise specialists choose fitness programs specifically for job-related tasks of SWAT operators when creating fitness programs. Fitness programming for law enforcement should focus on improving aerobic fitness, flexibility, core strength, and muscular power while maintaining muscular strength to meet the needs of these specialized officers.

What attributions do Australian high-performing general practices make for their success? Applying the clinical microsystems framework: a qualitative study

PubMed Central

Dunham, Annette H; Dunbar, James A; Johnson, Julie K; Fuller, Jeff; Morgan, Mark; Ford, Dale

2018-01-01

Objectives To identify the success attributions of high-performing Australian general practices and the enablers and barriers they envisage for practices wishing to emulate them. Design Qualitative study using semi-structured interviews and content analysis of the data. Responses were recorded, transcribed verbatim and coded according to success characteristics of high-performing clinical microsystems. Setting Primary healthcare with the participating general practices representing all Australian states and territories, and representing metropolitan and rural locations. Participants Twenty-two general practices identified as high performing via a number of success criteria. The 52 participants were 19 general practitioners, 18 practice managers and 15 practice nurses. Results Participants most frequently attributed success to the interdependence of the team members, patient-focused care and leadership of the practice. They most often signalled practice leadership, team interdependence and staff focus as enablers that other organisations would need to emulate their success. They most frequently identified barriers that might be encountered in the form of potential deficits or limitations in practice leadership, staff focus and mesosystem support. Conclusions Practice leaders need to empower their teams to take action through providing inclusive leadership that facilitates team interdependence. Mesosystem support for quality improvement in general practice should focus on enabling this leadership and team building, thereby ensuring improvement efforts are converted into effective healthcare provision. PMID:29643162

The novel solution for negative impact of out-of-band and outgassing by top coat materials in EUVL

NASA Astrophysics Data System (ADS)

Fujitani, Noriaki; Sakamoto, Rikimaru; Endo, Takafumi; Onishi, Ryuji; Nishita, Tokio; Yaguchi, Hiroaki; Ho, Bang-Ching

2013-03-01

EUV lithography (EUVL) is the most promising candidate of next generation technology for hp20nm node device manufacturing and beyond. However, the power of light source, masks and photo resists are the most critical issues for driving the EUVL. Especially, concerning about deterioration of the patterning performance by Out-of-Band (OoB) light existing in the EUV light, and contamination problem of exposure tool due to the resist outgassing are the key issues which have to be resolved in the material view point toward the high volume manufacturing by EUVL. This paper proposes the solution for these critical issues by applying the top coat material. The key characteristics for top coat material are the protection of the OoB effect, the prevention of the outgassing from resist as a barrier layer and enhancement of photo resist performance, like resist profile and process window. This paper describes the material design and performance. The optical property needs having the high absorbance of DUV light in OoB range and high transmittance for 13.5nm wavelength. Outgassing barrier property needs high broking property against non contamination chemical species from photo resist outgassing. The study of TOF-SIMS analysis indicates how much the polymer chemistry can impact for outgassing barrier property. The dependency of material design and lithography performance is also discussed.

Performance metric comparison study for non-magnetic bi-stable energy harvesters

NASA Astrophysics Data System (ADS)

Udani, Janav P.; Wrigley, Cailin; Arrieta, Andres F.

2017-04-01

Energy harvesting employing non-linear systems offers considerable advantages over linear systems given the broadband resonant response which is favorable for applications involving diverse input vibrations. In this respect, the rich dynamics of bi-stable systems present a promising means for harvesting vibrational energy from ambient sources. Harvesters deriving their bi-stability from thermally induced stresses as opposed to magnetic forces are receiving significant attention as it reduces the need for ancillary components and allows for bio- compatible constructions. However, the design of these bi-stable harvesters still requires further optimization to completely exploit the dynamic behavior of these systems. This study presents a comparison of the harvesting capabilities of non-magnetic, bi-stable composite laminates under variations in the design parameters as evaluated utilizing established power metrics. Energy output characteristics of two bi-stable composite laminate plates with a piezoelectric patch bonded on the top surface are experimentally investigated for variations in the thickness ratio and inertial mass positions for multiple load conditions. A particular design configuration is found to perform better over the entire range of testing conditions which include single and multiple frequency excitation, thus indicating that design optimization over the geometry of the harvester yields robust performance. The experimental analysis further highlights the need for appropriate design guidelines for optimization and holistic performance metrics to account for the range of operational conditions.

Why Is Bigger Not Always Better in Primary Health Care Practices? The Role of Mediating Organizational Factors.

PubMed

Pineault, Raynald; Provost, Sylvie; Borgès Da Silva, Roxane; Breton, Mylaine; Levesque, Jean-Frédéric

2016-01-01

Size of primary health care (PHC) practices is often used as a proxy for various organizational characteristics related to provision of care. The objective of this article is to identify some of these organizational characteristics and to determine the extent to which they mediate the relationship between size of PHC practice and patients' experience of care, preventive services, and unmet needs. In 2010, we conducted population and organization surveys in 2 regions of the province of Quebec. We carried out multilevel linear and logistic regression analyses, adjusting for respondents' individual characteristics. Size of PHC practice was associated with organizational characteristics and resources, patients' experience of care, unmet needs, and preventive services. Overall, the larger the size of a practice, the higher the accessibility, but the lower the continuity. However, these associations faded away when organizational variables were introduced in the analysis model. This result supports the hypothesized mediating effect of organizational characteristics on relationships between practice size and patients' experience of care, preventive services, and unmet needs. Our results indicate that size does not add much information to organizational characteristics. Using size as a proxy for organizational characteristics can even be misleading because its relationships with different outcomes are highly variable. © The Author(s) 2016.

Science as a second language: Analysis of Emergent Bilinguals performance and the impact of English language proficiency and first language characteristics on the Colorado measures of academic success for science

NASA Astrophysics Data System (ADS)

Bruno, Joanna K.

In an age when communication is highly important and states across the nation, including Colorado, have adopted Common Core State Standards, the need for academic language is even more important than ever. The language of science has been compared to a second language in that it uses specific discourse patterns, semantic rules, and a very specific vocabulary. There is a need for educators to better understand how language impacts academic achievement, specifically concerning Emergent Bilinguals (EBs). Research has identified the need to study the role language plays in content assessments and the impact they have on EBs performance (Abedi, 2008b; Abedi, Hofestter & Lord, 2004; Abedi & Lord, 2001). Since language is the means through which content knowledge is assessed, it is important to analyze this aspect of learning. A review of literature identified the need to create more reliable and valid content assessments for EBs (Abedi, 2008b) and to further study the impact of English proficiency on EBs performance on standardized assessments (Solorzano, 2008; Wolf, & Leon, 2009). This study contributes to the literature by analyzing EBs performance on a state-level science content assessment, taking into consideration English language proficiency, receptive versus productive elements of language, and students' home language. This study further contributes by discussing the relationship between language proficiency, and the different strands of science (physical, life, and earth) on the state science assessment. Finally, this study demonstrates that home language, English language proficiency, and receptive and productive elements of language are predictive of EBs' achievement on the CMAS for science, overall and by strand. It is the blending of the social (listening and speaking) with the academic (reading and writing) that is also important and possibly more important.

Who reports high company performance? A quantitative study of Chinese listed companies in the energy industry.

PubMed

Guo, Daoyan; Chen, Hong; Long, Ruyin

2016-01-01

In the increasingly competitive environment, top managers' background characteristics are undoubtedly vital factors for company performance. This study examines whether the performance of Chinese listed companies in the energy industry differs with respect to top managers' background characteristics and explores the exact distribution interval of top managers' background characteristics when company performance reaches the highest level. The initial sample was collected from the CSMAR database (2005-2014) for listed companies in the energy industry. After removing the outlier and missing data, the final number of observations was determined as 780. Descriptive statistics were used to investigate the present distribution of top managers' background characteristics, factor analysis was used to determine the dimensions of company performance, and one-way ANOVA was used to analyze the differences in company performance and its dimensions with respect to top managers' background characteristics. The findings show that both the age and length of service of top managers present an increasing trend over the years of the study period, whereas the educational level shows no significant changes. The performance of listed companies has three dimensions: profit performance, growth performance, and operating performance. Companies behave differently with regard to their top managers' background characteristics; when the top manager is 40-45 years old, with a doctoral degree and above, and in the 2nd-3rd year of his service period, his company will achieve a higher level of performance. This study contributes to the growing literature on company performance in the Chinese energy industry by demonstrating the differences in the performance of Chinese listed companies in the energy industry with regard to top managers' background characteristics, and reaching conclusions on the optimum distribution interval of top managers' background characteristics when company performance reaches the highest level. This study also provides a valuable reference for organizational reform and performance enhancement, which are urgent problems for the Chinese energy industry.

Understanding Surgical Resident and Fellow Perspectives on Their Operative Performance Feedback Needs: A Qualitative Study.

PubMed

Bello, Ricardo J; Sarmiento, Samuel; Meyer, Meredith L; Rosson, Gedge D; Cooney, Damon S; Lifchez, Scott D; Cooney, Carisa M

2018-04-20

Operative performance feedback is essential for surgical training. We aimed to understand surgical trainees' views on their operative performance feedback needs and to characterize feedback to elucidate factors affecting its value from the resident perspective. Using a qualitative research approach, 2 research fellows conducted semistructured, one-on-one interviews with surgical trainees. We analyzed recurring themes generated during interviews related to feedback characteristics, as well as the extent to which performance rating tools can help meet trainees' operative feedback needs. Departments or divisions of general or plastic surgery at 9 US academic institutions. Surgical residents and clinical fellows in general or plastic surgery. We conducted 30 interviews with 9 junior residents, 14 senior residents, and 7 clinical fellows. Eighteen (60%) participants were in plastic and 12 (40%) were in general surgery. Twenty-four participants (80%) reported feedback as very or extremely important during surgical training. All trainees stated that verbal, face-to-face feedback is the most valuable, especially if occurring during (92%) or immediately after (65%) cases. Of those trainees using performance rating tools (74%), most (57%) expressed positive views about them but wanted the tools to complement and not replace verbal feedback in surgical education. Trainees value feedback more if received within 1 week or the case. Verbal, face-to-face feedback is very or extremely important to surgical trainees. Residents and fellows prefer to receive feedback during or immediately after a case and continue to value feedback if received within 1 week of the event. Performance rating tools can be useful for providing formative feedback and documentation but should not replace verbal, face-to-face feedback. Considering trainee views on feedback may help reduce perceived gaps in feedback demand-versus-supply in surgical training, which may be essential to overcoming current challenges in surgical education. Copyright © 2018 Association of Program Directors in Surgery. Published by Elsevier Inc. All rights reserved.

We can be heroes: MLA's leadership journey(s).

PubMed

Tooey, Mary Joan M J

2017-01-01

Are there key attributes of leaders? Extrovert versus introvert? Charismatic? Detail oriented? Visionary? How do past leaders of the Medical Library Association (MLA) stack up? What leadership skills will MLA's leaders need in a complex information future? Leadership attributes of MLA's past and current presidents were studied to determine the common characteristics shared among these leaders. An examination of the leadership literature identified critical leadership characteristics essential to successful future leaders. MLA's past, current, and future leadership development efforts were examined. Finally, all members were encouraged to consider leadership with a small "l" and become leaders based on their own strengths, interests, and environments. A text analysis was performed on past presidential profiles, the past twenty-five years of MLA presidents were surveyed, and conversations with MLA's current presidents were held to determine commonalities among leadership characteristics. These were compared and contrasted with characteristics in the current leadership literature regarding the qualities of future leaders. The text analysis of past presidential profiles was not particularly revelatory regarding leadership qualities of early MLA presidents although several generalized traits emerged including collaborative traits; management traits such as effectiveness and efficiency, innovation, and vision; personal traits such as humor and energy; and finally, a passion for the work were revealed. These aligned with traits identified in the survey of the past twenty-five years of MLA presidents and with the thoughts of the president-elect, president, and past president. Additional qualities identified were communication skills, political acumen, creativity, courage, and respect for the opinions and concerns of all members. MLA's current leadership programs were reviewed in the context of examining traits needed by leaders of the future. A lack of focus on the needs of middle managers and the development of individual leadership skills was identified. As an organization, MLA should focus on leadership development in contrast to management training to prepare members as leaders in careers and work that may be vastly different than current situations. Equipping members with the skills enabling them to lead and thrive in these diverse situations, whether as the heads of programs or middle managers, or exploring and empowering individual leadership development while maintaining a passion for the profession, will be essential.

Demonstration of Multi- and Single-Reader Sample Size Program for Diagnostic Studies software.

PubMed

Hillis, Stephen L; Schartz, Kevin M

2015-02-01

The recently released software Multi- and Single-Reader Sample Size Sample Size Program for Diagnostic Studies , written by Kevin Schartz and Stephen Hillis, performs sample size computations for diagnostic reader-performance studies. The program computes the sample size needed to detect a specified difference in a reader performance measure between two modalities, when using the analysis methods initially proposed by Dorfman, Berbaum, and Metz (DBM) and Obuchowski and Rockette (OR), and later unified and improved by Hillis and colleagues. A commonly used reader performance measure is the area under the receiver-operating-characteristic curve. The program can be used with typical common reader-performance measures which can be estimated parametrically or nonparametrically. The program has an easy-to-use step-by-step intuitive interface that walks the user through the entry of the needed information. Features of the software include the following: (1) choice of several study designs; (2) choice of inputs obtained from either OR or DBM analyses; (3) choice of three different inference situations: both readers and cases random, readers fixed and cases random, and readers random and cases fixed; (4) choice of two types of hypotheses: equivalence or noninferiority; (6) choice of two output formats: power for specified case and reader sample sizes, or a listing of case-reader combinations that provide a specified power; (7) choice of single or multi-reader analyses; and (8) functionality in Windows, Mac OS, and Linux.

Auditory fitness for duty: a review.

PubMed

Tufts, Jennifer B; Vasil, Kristin A; Briggs, Sarah

2009-10-01

Auditory fitness for duty (AFFD) refers to the possession of hearing abilities sufficient for safe and effective job performance. In jobs such as law enforcement and piloting, where the ability to hear is critical to job performance and safety, hearing loss can decrease performance, even to the point of being hazardous to self and others. Tests of AFFD should provide an employer with a valid assessment of an employee's ability to perform the job safely, without discriminating against the employee purely on the basis of hearing loss. The purpose of this review is to provide a basic description of the functional hearing abilities required in hearing-critical occupations, and a summary of current practices in AFFD evaluation. In addition, we suggest directions for research and standardization to ensure best practices in the evaluation of AFFD in the future. We conducted a systematic review of the English-language peer-reviewed literature in AFFD. "Popular" search engines were consulted for governmental regulations and trade journal articles. We also contacted professionals with expertise in AFFD regarding research projects, unpublished material, and current standards. The literature review provided information regarding the functional hearing abilities required to perform hearing-critical tasks, the development of and characteristics of AFFD protocols, and the current implementation of AFFD protocols. This review paper provides evidence of the need to institute job-specific AFFD protocols, move beyond the pure-tone audiogram, and establish the validity of test protocols. These needs are arguably greater now than in times past.

Structural Model for the Effects of Environmental Elements on the Psychological Characteristics and Performance of the Employees of Manufacturing Systems

PubMed Central

Realyvásquez, Arturo; Maldonado-Macías, Aidé Aracely; García-Alcaraz, Jorge; Cortés-Robles, Guillermo; Blanco-Fernández, Julio

2016-01-01

This paper analyzes the effects of environmental elements on the psychological characteristics and performance of employees in manufacturing systems using structural equation modeling. Increasing the comprehension of these effects may help optimize manufacturing systems regarding their employees’ psychological characteristics and performance from a macroergonomic perspective. As the method, a new macroergonomic compatibility questionnaire (MCQ) was developed and statistically validated, and 158 respondents at four manufacture companies were considered. Noise, lighting and temperature, humidity and air quality (THAQ) were used as independent variables and psychological characteristics and employees’ performance as dependent variables. To propose and test the hypothetical causal model of significant relationships among the variables, a data analysis was deployed. Results found that the macroergonomic compatibility of environmental elements presents significant direct effects on employees’ psychological characteristics and either direct or indirect effects on the employees’ performance. THAQ had the highest direct and total effects on psychological characteristics. Regarding the direct and total effects on employees’ performance, the psychological characteristics presented the highest effects, followed by THAQ conditions. These results may help measure and optimize manufacturing systems’ performance by enhancing their macroergonomic compatibility and quality of life at work of the employees. PMID:26742054

Structural Model for the Effects of Environmental Elements on the Psychological Characteristics and Performance of the Employees of Manufacturing Systems.

PubMed

Realyvásquez, Arturo; Maldonado-Macías, Aidé Aracely; García-Alcaraz, Jorge; Cortés-Robles, Guillermo; Blanco-Fernández, Julio

2016-01-05

This paper analyzes the effects of environmental elements on the psychological characteristics and performance of employees in manufacturing systems using structural equation modeling. Increasing the comprehension of these effects may help optimize manufacturing systems regarding their employees' psychological characteristics and performance from a macroergonomic perspective. As the method, a new macroergonomic compatibility questionnaire (MCQ) was developed and statistically validated, and 158 respondents at four manufacture companies were considered. Noise, lighting and temperature, humidity and air quality (THAQ) were used as independent variables and psychological characteristics and employees' performance as dependent variables. To propose and test the hypothetical causal model of significant relationships among the variables, a data analysis was deployed. Results found that the macroergonomic compatibility of environmental elements presents significant direct effects on employees' psychological characteristics and either direct or indirect effects on the employees' performance. THAQ had the highest direct and total effects on psychological characteristics. Regarding the direct and total effects on employees' performance, the psychological characteristics presented the highest effects, followed by THAQ conditions. These results may help measure and optimize manufacturing systems' performance by enhancing their macroergonomic compatibility and quality of life at work of the employees.

A sensorless method for measuring the point mobility of mechanical structures

NASA Astrophysics Data System (ADS)

Boulandet, R.; Michau, M.; Herzog, P.; Micheau, P.; Berry, A.

2016-09-01

This paper presents a convenient and cost-effective experimental tool for measuring the mobility characteristics of a mechanical structure. The objective is to demonstrate that the point mobility measurement can be performed using only an electrodynamic inertial exciter. Unlike previous work based on voice coil actuators, no load cell or accelerometer is needed. Instead, it is theoretically shown that the mobility characteristics of the structure can be estimated from variations in the electrical input impedance of the actuator fixed onto it, provided that the electromechanical parameters of the actuator are known. The proof of concept is made experimentally using a cheap commercially available actuator on a simply supported plate, leading to a good dynamic range from 100 Hz to 1 kHz. The methodology to assess the basic parameters of the actuator is also given. Measured data are compared to a standard shaker testing and the strengths and weaknesses of the sensorless mobility measuring device are discussed. It is believed that this sensorless mobility measuring device can be a convenient experimental tool to determine the dynamic characteristics of a wide range of mechanical structures.

Frequency of data extraction errors and methods to increase data extraction quality: a methodological review.

PubMed

Mathes, Tim; Klaßen, Pauline; Pieper, Dawid

2017-11-28

Our objective was to assess the frequency of data extraction errors and its potential impact on results in systematic reviews. Furthermore, we evaluated the effect of different extraction methods, reviewer characteristics and reviewer training on error rates and results. We performed a systematic review of methodological literature in PubMed, Cochrane methodological registry, and by manual searches (12/2016). Studies were selected by two reviewers independently. Data were extracted in standardized tables by one reviewer and verified by a second. The analysis included six studies; four studies on extraction error frequency, one study comparing different reviewer extraction methods and two studies comparing different reviewer characteristics. We did not find a study on reviewer training. There was a high rate of extraction errors (up to 50%). Errors often had an influence on effect estimates. Different data extraction methods and reviewer characteristics had moderate effect on extraction error rates and effect estimates. The evidence base for established standards of data extraction seems weak despite the high prevalence of extraction errors. More comparative studies are needed to get deeper insights into the influence of different extraction methods.

Eletrobras management program in ergonomics: the pursuit of excellence through maturity levels.

PubMed

Pires, Paulo Roberto de Oliveira Bassil; Rezende, Fagner Fagundes

2012-01-01

Ergonomics for Eletrobras arose from the need in having an environment more suitable to the characteristics and circumstances of employees, in compliance with Regulation Standard no. 17 - Ergonomics (NR17) of the Ministry of Labor and Employment. Being a mixed economy company with regionalized anthropometric characteristics of its employees, the study of ergonomic adjustments and improvement of the concept of Ergonomics were and have been of great importance to the company's production environment. These advances have contributed to the development of specific technical criteria for the purchase of furniture and work tools (accessories), apart from their possible effects on the user. Ergonomics has been perceived as a technical-scientific tool, aimed to study labor interactions, new technologies and specific characteristics of the activities performed. To meet these demands a multidisciplinary Ergonomics Committee was created in Eletrobras, and effectively established the Ergonomics Management Program in the company; This program is marked by well-defined phases with great success in making use of these studies for other types of corporate activities and also facilitating the program control and its maturity levels, even at a business level.

The hidden treasure in nursing leadership: informal leaders.

PubMed

Downey, Marty; Parslow, Susan; Smart, Marcia

2011-05-01

The goal of the present article was to generate awareness of characteristics of informal leaders in healthcare with the emphasis on nurses in acute care settings. There is limited research or literature regarding informal leaders in nursing and how they positively impact nursing management, the organization and, ultimately, patient care. Identification of nurses with leadership characteristics is important so that leadership development and mentoring can occur within the nursing profession. More than ever, nursing needs energetic, committed and dedicated leaders to meet the challenges of the healthcare climate and the nursing shortage. This requires nurse leaders to consider all avenues to ensure the ongoing profitability and viability of their healthcare facility. This paper discusses clinical nurses as informal leaders; characteristics of the informal nurse leader, the role they play, how they impact their unit and how they shape the organization.   Informal nurse leaders are an underutilized asset in health care. If identified early, these nurses can be developed and empowered to impact unit performance, efficiency and environmental culture in a positive manner. © 2011 The Authors. Journal compilation © 2011 Blackwell Publishing Ltd.

Towards an International Classification for Patient Safety: the conceptual framework.

PubMed

Sherman, Heather; Castro, Gerard; Fletcher, Martin; Hatlie, Martin; Hibbert, Peter; Jakob, Robert; Koss, Richard; Lewalle, Pierre; Loeb, Jerod; Perneger, Thomas; Runciman, William; Thomson, Richard; Van Der Schaaf, Tjerk; Virtanen, Martti

2009-02-01

Global advances in patient safety have been hampered by the lack of a uniform classification of patient safety concepts. This is a significant barrier to developing strategies to reduce risk, performing evidence-based research and evaluating existing healthcare policies relevant to patient safety. Since 2005, the World Health Organization's World Alliance for Patient Safety has undertaken the Project to Develop an International Classification for Patient Safety (ICPS) to devise a classification which transforms patient safety information collected from disparate systems into a common format to facilitate aggregation, analysis and learning across disciplines, borders and time. A drafting group, comprised of experts from the fields of patient safety, classification theory, health informatics, consumer/patient advocacy, law and medicine, identified and defined key patient safety concepts and developed an internationally agreed conceptual framework for the ICPS based upon existing patient safety classifications. The conceptual framework was iteratively improved through technical expert meetings and a two-stage web-based modified Delphi survey of over 250 international experts. This work culminated in a conceptual framework consisting of ten high level classes: incident type, patient outcomes, patient characteristics, incident characteristics, contributing factors/hazards, organizational outcomes, detection, mitigating factors, ameliorating actions and actions taken to reduce risk. While the framework for the ICPS is in place, several challenges remain. Concepts need to be defined, guidance for using the classification needs to be provided, and further real-world testing needs to occur to progressively refine the ICPS to ensure it is fit for purpose.

Towards an International Classification for Patient Safety: the conceptual framework

PubMed Central

Sherman, Heather; Castro, Gerard; Fletcher, Martin; Hatlie, Martin; Hibbert, Peter; Jakob, Robert; Koss, Richard; Lewalle, Pierre; Loeb, Jerod; Perneger, Thomas; Runciman, William; Thomson, Richard; Van Der Schaaf, Tjerk; Virtanen, Martti

2009-01-01

Global advances in patient safety have been hampered by the lack of a uniform classification of patient safety concepts. This is a significant barrier to developing strategies to reduce risk, performing evidence-based research and evaluating existing healthcare policies relevant to patient safety. Since 2005, the World Health Organization's World Alliance for Patient Safety has undertaken the Project to Develop an International Classification for Patient Safety (ICPS) to devise a classification which transforms patient safety information collected from disparate systems into a common format to facilitate aggregation, analysis and learning across disciplines, borders and time. A drafting group, comprised of experts from the fields of patient safety, classification theory, health informatics, consumer/patient advocacy, law and medicine, identified and defined key patient safety concepts and developed an internationally agreed conceptual framework for the ICPS based upon existing patient safety classifications. The conceptual framework was iteratively improved through technical expert meetings and a two-stage web-based modified Delphi survey of over 250 international experts. This work culminated in a conceptual framework consisting of ten high level classes: incident type, patient outcomes, patient characteristics, incident characteristics, contributing factors/hazards, organizational outcomes, detection, mitigating factors, ameliorating actions and actions taken to reduce risk. While the framework for the ICPS is in place, several challenges remain. Concepts need to be defined, guidance for using the classification needs to be provided, and further real-world testing needs to occur to progressively refine the ICPS to ensure it is fit for purpose. PMID:19147595

Trail resource impacts and an examination of alternative assessment techniques

USGS Publications Warehouse

Marion, J.L.; Leung, Y.-F.

2001-01-01

Trails are a primary recreation resource facility on which recreation activities are performed. They provide safe access to non-roaded areas, support recreational opportunities such as hiking, biking, and wildlife observation, and protect natural resources by concentrating visitor traffic on resistant treads. However, increasing recreational use, coupled with poorly designed and/or maintained trails, has led to a variety of resource impacts. Trail managers require objective information on trails and their conditions to monitor trends, direct trail maintenance efforts, and evaluate the need for visitor management and resource protection actions. This paper reviews trail impacts and different types of trail assessments, including inventory, maintenance, and condition assessment approaches. Two assessment methods, point sampling and problem assessment, are compared empirically from separate assessments of a 15-mile segment of the Appalachian Trail in Great Smoky Mountains National Park. Results indicate that point sampling and problem assessment methods yield distinctly different types of quantitative information. The point sampling method provides more accurate and precise measures of trail characteristics that are continuous or frequent (e.g., tread width or exposed soil). The problem assessment method is a preferred approach for monitoring trail characteristics that can be easily predefined or are infrequent (e.g., excessive width or secondary treads), particularly when information on the location of specific trail impact problems is needed. The advantages and limitations of these two assessment methods are examined in relation to various management and research information needs. The choice and utility of these assessment methods are also discussed.

Classification of small lesions in dynamic breast MRI: Eliminating the need for precise lesion segmentation through spatio-temporal analysis of contrast enhancement over time.

PubMed

Nagarajan, Mahesh B; Huber, Markus B; Schlossbauer, Thomas; Leinsinger, Gerda; Krol, Andrzej; Wismüller, Axel

2013-10-01

Characterizing the dignity of breast lesions as benign or malignant is specifically difficult for small lesions; they don't exhibit typical characteristics of malignancy and are harder to segment since margins are harder to visualize. Previous attempts at using dynamic or morphologic criteria to classify small lesions (mean lesion diameter of about 1 cm) have not yielded satisfactory results. The goal of this work was to improve the classification performance in such small diagnostically challenging lesions while concurrently eliminating the need for precise lesion segmentation. To this end, we introduce a method for topological characterization of lesion enhancement patterns over time. Three Minkowski Functionals were extracted from all five post-contrast images of sixty annotated lesions on dynamic breast MRI exams. For each Minkowski Functional, topological features extracted from each post-contrast image of the lesions were combined into a high-dimensional texture feature vector. These feature vectors were classified in a machine learning task with support vector regression. For comparison, conventional Haralick texture features derived from gray-level co-occurrence matrices (GLCM) were also used. A new method for extracting thresholded GLCM features was also introduced and investigated here. The best classification performance was observed with Minkowski Functionals area and perimeter , thresholded GLCM features f8 and f9, and conventional GLCM features f4 and f6. However, both Minkowski Functionals and thresholded GLCM achieved such results without lesion segmentation while the performance of GLCM features significantly deteriorated when lesions were not segmented ( p < 0.05). This suggests that such advanced spatio-temporal characterization can improve the classification performance achieved in such small lesions, while simultaneously eliminating the need for precise segmentation.

Enhanced Discharge Performance in a Ring Cusp Plasma Source

NASA Technical Reports Server (NTRS)

Foster, John E.; Patterson, Michael J.

2000-01-01

There is a need for a lightweight, low power ion thruster for space science missions. Such an ion thruster is under development at NASA Glenn Research Center. In an effort to better understand the discharge performance of this thruster, a thruster discharge chamber with an anode containing electrically isolated electrodes at the cusps was fabricated and tested. Characteristics of this ring cusp ion discharge were measured without ion beam extraction. Discharge current was measured at collection electrodes located at the magnetic cusps and at the anode body itself. Discharge performance and plasma properties were measured as a function of power, which was varied between 20 and 50 W. It was found that ion production costs decreased by as much as 20 percent when the two most downstream cusp electrodes were allowed to float. Floating the electrodes did not give rise to a significant increase in discharge power even though the plasma density increased markedly. The improved performance is attributed to enhanced electron containment.

Internal Plasma Properties and Enhanced Performance of an 8 cm Ion Thruster Discharge

NASA Technical Reports Server (NTRS)

Foster, John E.; Patterson, Michael J.

1999-01-01

There is a need for a lightweight, low power ion thruster for space science missions. Such an ion thruster is under development at NASA Glenn Research Center. In an effort to better understand the discharge performance of this thruster. a version of this thruster with an anode containing electrically isolated electrodes at the cusps was fabricated and tested. Discharge characteristics of this ring cusp ion thruster were measured without ion beam extraction. Discharge current was measured at collection electrodes located at the cusps and at the anode body itself. Discharge performance and plasma properties were measured as a function of discharge power, which was varied between 20 and 50 W. It was found that ion production costs decreased by as much as 20 percent when the two most downstream cusp electrodes were allowed to float. Floating the electrodes did not give rise to a significant increase in discharge power even though the plasma density increased markedly. The improved performance is attributed to enhanced electron containment.

Robust Control for Microgravity Vibration Isolation using Fixed Order, Mixed H2/Mu Design

NASA Technical Reports Server (NTRS)

Whorton, Mark

2003-01-01

Many space-science experiments need an active isolation system to provide a sufficiently quiescent microgravity environment. Modern control methods provide the potential for both high-performance and robust stability in the presence of parametric uncertainties that are characteristic of microgravity vibration isolation systems. While H2 and H(infinity) methods are well established, neither provides the levels of attenuation performance and robust stability in a compensator with low order. Mixed H2/H(infinity), controllers provide a means for maximizing robust stability for a given level of mean-square nominal performance while directly optimizing for controller order constraints. This paper demonstrates the benefit of mixed norm design from the perspective of robustness to parametric uncertainties and controller order for microgravity vibration isolation. A nominal performance metric analogous to the mu measure, for robust stability assessment is also introduced in order to define an acceptable trade space from which different control methodologies can be compared.

Induced wettability and surface-volume correlation of composition for bovine bone derived hydroxyapatite particles

NASA Astrophysics Data System (ADS)

Maidaniuc, Andreea; Miculescu, Florin; Voicu, Stefan Ioan; Andronescu, Corina; Miculescu, Marian; Matei, Ecaterina; Mocanu, Aura Catalina; Pencea, Ion; Csaki, Ioana; Machedon-Pisu, Teodor; Ciocan, Lucian Toma

2018-04-01

Hydroxyapatite powders characteristics need to be determined both for quality control purposes and for a proper control of microstructural features of bone reconstruction products. This study combines bulk morphological and compositional analysis methods (XRF, SEM-EDS, FT-IR) with surface-related methods (XPS, contact angle measurements) in order to correlate the characteristics of hydroxyapatite powders derived from bovine bone for its use in medical applications. An experimental approach for correlating the surface and volume composition was designed based on the analysis depth of each spectral method involved in the study. Next, the influences of powder particle size and forming method on the contact angle between water drops and ceramic surface were evaluated for identifying suitable strategies of tuning hydroxyapatite's wettability. The results revealed a preferential arrangement of chemical elements at the surface of hydroxyapatite particles which could induce a favourable material behaviour in terms of sinterability and biological performance.

Osteomyelitis: a descriptive study.

PubMed

Prieto-Pérez, Laura; Pérez-Tanoira, Ramón; Petkova-Saiz, Elizabet; Pérez-Jorge, Concepción; Lopez-Rodriguez, Cristina; Alvarez-Alvarez, Beatriz; Polo-Sabau, Jorge; Esteban, Jaime

2014-03-01

To analyze the incidence and clinical-microbiological characteristics of osteomyelitis (OM) in a tertiary Spanish hospital. All cases diagnosed with OM between January 2007 and December 2010 were retrospectively reviewed. The variables examined include epidemiological characteristics, risk factors, affected bone, radiographic changes, histology, microbiological culture results, antibiotic treatment, and the need for surgery. Sixty-three cases of OM were diagnosed. Twenty-six patients (41.3%) had acute OM whereas 37 patients (58.7%) were classified as chronic OM. OM may result from haematogenous or contiguous microbial seeding. In this group, 49 patients (77.8%) presented with OM secondary to a contiguous source of infection and 14 patients had hematogenous OM (22.2%). Staphylococcus aureus was the most commonly found microorganism. OM mainly affected patients with risk factors related to the presence of vascular diseases. Antibiotic treatment must be guided by susceptibility patterns of individual microorganisms, although it must be performed together with surgery in most of the cases.

DOE LeRC photovoltaic systems test facility

NASA Technical Reports Server (NTRS)

Cull, R. C.; Forestieri, A. F.

1978-01-01

The facility was designed and built and is being operated as a national facility to serve the needs of the entire DOE National Photovoltaic Program. The object of the facility is to provide a place where photovoltaic systems may be assembled and electrically configured, without specific physical configuration, for operation and testing to evaluate their performance and characteristics. The facility as a breadboard system allows investigation of operational characteristics and checkout of components, subsystems and systems before they are mounted in field experiments or demonstrations. The facility as currently configured consist of 10 kW of solar arrays built from modules, two inverter test stations, a battery storage system, interface with local load and the utility grid, and instrumentation and control necessary to make a flexible operating facility. Expansion to 30 kW is planned for 1978. Test results and operating experience are summaried to show the variety of work that can be done with this facility.

Injection Molding and its application to drug delivery.

PubMed

Zema, Lucia; Loreti, Giulia; Melocchi, Alice; Maroni, Alessandra; Gazzaniga, Andrea

2012-05-10

Injection Molding (IM) consists in the injection, under high pressure conditions, of heat-induced softened materials into a mold cavity where they are shaped. The advantages the technique may offer in the development of drug products concern both production costs (no need for water or other solvents, continuous manufacturing, scalability, patentability) and technological/biopharmaceutical characteristics of the molded items (versatility of the design and composition, possibility of obtaining solid molecular dispersions/solutions of the active ingredient). In this article, process steps and formulation aspects relevant to IM are discussed, with emphasis on the issues and advantages connected with the transfer of this technique from the plastics industry to the production of conventional and controlled-release dosage forms. Moreover, its pharmaceutical applications thus far proposed in the primary literature, intended as either alternative manufacturing strategies for existing products or innovative systems with improved design and performance characteristics, are critically reviewed. Copyright © 2012 Elsevier B.V. All rights reserved.

Use of CDMA access technology in mobile satellite systems

NASA Technical Reports Server (NTRS)

Ramasastry, Jay; Wiedeman, Bob

1995-01-01

Use of Code Division Multiple Access (CDMA) technology in terrestrial wireless systems is fairly well understood. Similarly, design and operation of Power Control in a CDMA-based system in a terrestrial environment is also well established. Terrestrial multipath characteristics, and optimum design of the CDMA receiver to deal with multipath and fading conditions are reliably established. But the satellite environment is different. When the CDMA technology is adopted to the satellite environment, other design features need to be incorporated (for example; interleaving, open-loop and closed-loop power control design, diversity characteristics) to achieve comparable level of system performance. In fact, the GLOBALSTAR LEO/MSS system has incorporated all these features. Contrary to some published reports, CDMA retains the advantages in the satellite environment that are similar to those achieved in the terrestrial environment. This document gives a description of the CDMA waveform and other design features adopted for mobile satellite applications.

Integrated feeds for electronically reconfigurable apertures

NASA Astrophysics Data System (ADS)

Nicholls, Jeffrey Grant

With the increasing ubiquity of wireless technology, the need for lower-profile, electronically reconfigurable, highly-directive beam-steering antennas is increasing. This thesis proposes a new electronic beam-steering antenna architecture which combines the full-space beam-steering properties of reflectarrays and transmitarrays with the low-profile feeding characteristics of leaky-wave antennas. Two designs are developed: an integrated feed reflectarray and an integrated feed transmitarray, both of which integrate a leaky-wave feed directly next to the reconfigurable aperture itself. The integrated feed transmitarray proved to be the better architecture due to its simpler design and better performance. A 6-by-6 element array was fabricated and experimentally verified, and full-space (both azimuth and elevation) beam-steering was demonstrated at angles up to 45 degrees off broadside. In addition to the reduction in profile, the integrated feed design enables robust fixed control of the amplitude distribution across the aperture, a characteristic not as easily attained in typical reflectarrays/transmitarrays.

Child Behaviors of Young Children With Autism Spectrum Disorder Across Play Settings.

PubMed

MacDonald, Megan; Hatfield, Bridget; Twardzik, Erica

2017-01-01

The hallmark characteristics of a diagnosis of autism spectrum disorder (ASD) are deficits in social communicative skills and the use of repetitive and/or stereotyped behaviors. In addition, children with ASD experience known motor-skill delays. The purpose of this study was to examine salient child behaviors of young children with and without ASD in 2 distinctly different play settings: a traditional social-play-based setting and a motor-behavior-based play setting. Child behavior (engagement toward parent, negativity, and attention) and dyad characteristics (connectedness) were examined in 2 distinctly different play settings. Results indicated that children with ASD performed more like their peers without ASD in a social-play-based setting and less like their peers in a motor-behavior-based play setting. Aspects of our results shed light on the critical need to develop creative methods of early intervention that combine efforts in all aspects of child development, including motor-skill development.

An analysis of an optimal selection process for characteristics and technical performance of baseball pitchers.

PubMed

Lin, Wen-Bin; Tung, I-Wu; Chen, Mei-Jung; Chen, Mei-Yen

2011-08-01

Selection of a qualified pitcher has relied previously on qualitative indices; here, both quantitative and qualitative indices including pitching statistics, defense, mental skills, experience, and managers' recognition were collected, and an analytic hierarchy process was used to rank baseball pitchers. The participants were 8 experts who ranked characteristics and statistics of 15 baseball pitchers who comprised the first round of potential representatives for the Chinese Taipei National Baseball team. The results indicated a selection rate that was 91% consistent with the official national team roster, as 11 pitchers with the highest scores who were recommended as optimal choices to be official members of the Chinese Tai-pei National Baseball team actually participated in the 2009 Baseball World Cup. An analytic hierarchy can aid in selection of qualified pitchers, depending on situational and practical needs; the method could be extended to other sports and team-selection situations.

Full-scale semispan tests of a business-jet wing with a natural laminar flow airfoil

NASA Technical Reports Server (NTRS)

Hahne, David E.; Jordan, Frank L., Jr.

1991-01-01

A full-scale semispan model was investigated to evaluate and document the low-speed, high-lift characteristics of a business-jet class wing that utilized the HSNLF(1)-0213 airfoil section and a single-slotted flap system. Also, boundary-layer transition effects were examined, a segmented leading-edge droop for improved stall/spin resistance was studied, and two roll-controlled devices were evaluated. The wind-tunnel investigation showed that deployment of single-slotted, trailing-edge flap was effective in providing substantial increments in lift required for takeoff and landing performance. Fixed-transition studies to investigate premature tripping of the boundary layer indicated no adverse effects in lift and pitching-moment characteristics for either the cruise or landing configuration. The full-scale results also suggested the need to further optimize the leading-edge droop design that was developed in the subscale tests.

An instrument for the geometric attributes of metallic appearance.

PubMed

Christie, J S

1969-09-01

With the use of a greater variety of metals and methods of finishing them, an increasing need to measure metallic appearance has developed in the automotive industry. A simple and easy to operate instrument has been designed to measure the geometric characteristics of reflectance related to metallic appearance. These are specular reflectance, distinctness of image, haze, and diffuseness. A series of selected aluminum and stainless steel specimens has been used to test the performance of the new instrument and of older devices with which it has been compared. Functionally, the new instrument combines features of the Distinctness of ReflectedImage (DORI)meter designed by Tingle, and the abridged goniophotometer designed by Tingle and George. The design and operation of the new instrument have been simplified by use of multiple receptor apertures with optical fiber light collectors. The measurement of a wide range of metal appearance characteristic has thus been achieved with mechanical and electrical circuit simplicity.

A high-fidelity weather time series generator using the Markov Chain process on a piecewise level

NASA Astrophysics Data System (ADS)

Hersvik, K.; Endrerud, O.-E. V.

2017-12-01

A method is developed for generating a set of unique weather time-series based on an existing weather series. The method allows statistically valid weather variations to take place within repeated simulations of offshore operations. The numerous generated time series need to share the same statistical qualities as the original time series. Statistical qualities here refer mainly to the distribution of weather windows available for work, including durations and frequencies of such weather windows, and seasonal characteristics. The method is based on the Markov chain process. The core new development lies in how the Markov Process is used, specifically by joining small pieces of random length time series together rather than joining individual weather states, each from a single time step, which is a common solution found in the literature. This new Markov model shows favorable characteristics with respect to the requirements set forth and all aspects of the validation performed.

Sheath oscillation characteristics and effect on near-wall conduction in a krypton Hall thruster

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhang, Fengkui, E-mail: fengkuizhang@163.com; Kong, Lingyi; Li, Chenliang

2014-11-15

Despite its affordability, the krypton Hall-effect thruster in applications always had problems in regard to performance. The reason for this degradation is studied from the perspective of the near-wall conductivity of electrons. Using the particle-in-cell method, the sheath oscillation characteristics and its effect on near-wall conduction are compared in the krypton and xenon Hall-effect thrusters both with wall material composed of BNSiO{sub 2}. Comparing these two thrusters, the sheath in the krypton-plasma thruster will oscillate at low electron temperatures. The near-wall conduction current is only produced by collisions between electrons and wall, thereby causing a deficiency in the channel current.more » The sheath displays spatial oscillations only at high electron temperature; electrons are then reflected to produce the non-oscillation conduction current needed for the krypton-plasma thruster. However, it is accompanied with intensified oscillations.« less

[Sociodemographic and academic profile of nursing students from four Brazilian institutions].

PubMed

Bublitz, Susan; de Azevedo Guido, Laura; Kirchhof, Raquel Soares; Neves, Eliane Tatsch; Lopes, Luis Felipe Dias

2015-03-01

This study aimed to describe the sociodemographic and academic characteristics of nursing students from four Brazilian Educational Institutions. It is a prospective cross-sectional study. The data were collected between April 2011 and March 2012, through a survey form with questions about sociodemographic and academic characteristics of the students. The participants were graduate students enrolled in the nursing course, aged 18 years or older. 705 students participated, and these were mostly women, single, childless, who lived with their families, did not take part in sport activities and performed leisure activities. Also, most students do not participate in research groups, were not granted scholarships, are not employed, are satisfied with the course and do not intend to leave it. This study may become an important tool for the development of strategies that address the needs of students and also improve the quality of the teaching and learning process, reducing dropout rates.

Fabrication of Porous Ceramic-Geopolymer Based Material to Improve Water Absorption and Retention in Construction Materials: A Review

NASA Astrophysics Data System (ADS)

Jamil, N. H.; Ibrahim, W. M. A. W.; Abdullah, M. M. A. B.; Sandu, A. V.; Tahir, M. F. M.

2017-06-01

Porous ceramic nowadays has been investigated for a variety of its application such as filters, lightweight structural component and others due to their specific properties such as high surface area, stability and permeability. Besides, it has the properties of low thermal conductivity. Various formation techniques making these porous ceramic properties can be tailored or further fine-tuned to obtain the optimum characteristic. Porous materials also one of the good candidate for absorption properties. Conventional construction materials are not design to have good water absorption and retention that lead to the poor performance on these criteria. Temperature is a major driving force for moisture movement and influences sorption characteristics of many constructions materials. The effect of elevated temperatures on the water absorption coefficient and retention remain as critical issue that need to be investigated. Therefore, this paper will review the process parameters in fabricating porous ceramic for absorption properties.

Long-term exposure to zero-g and the gastro-intestinal tract function

NASA Technical Reports Server (NTRS)

Mccormack, Percial D.

1989-01-01

The gastrointestinal tract (GIT) function is described with emphasis placed on its important role to smooth, delay, and modify sudden fluid load stress applied to the fluid distribution control system in the body. Two basic components of the GIT are considered: stomach dynamics, which involves storage, mixing, and discharge of food into the intestine after addition of gastric juices; and absorption of water and electrolytes from the small intestine. A dynamic model of these components is described, along with performance characteristics computed consecutively for one g and zero g conditions. The main impact of the zero g condition appears to be through a change in osmotic driven transport across the gut wall. A dramatic change in transport characteristics is predicted with implication for many body systems (the immune system in particular) during long-term exposure to zero g. Experimental measurements in zero g are needed to evaluate these predictions.

Common characteristics of open source software development and applicability for drug discovery: a systematic review

PubMed Central

2011-01-01

Background Innovation through an open source model has proven to be successful for software development. This success has led many to speculate if open source can be applied to other industries with similar success. We attempt to provide an understanding of open source software development characteristics for researchers, business leaders and government officials who may be interested in utilizing open source innovation in other contexts and with an emphasis on drug discovery. Methods A systematic review was performed by searching relevant, multidisciplinary databases to extract empirical research regarding the common characteristics and barriers of initiating and maintaining an open source software development project. Results Common characteristics to open source software development pertinent to open source drug discovery were extracted. The characteristics were then grouped into the areas of participant attraction, management of volunteers, control mechanisms, legal framework and physical constraints. Lastly, their applicability to drug discovery was examined. Conclusions We believe that the open source model is viable for drug discovery, although it is unlikely that it will exactly follow the form used in software development. Hybrids will likely develop that suit the unique characteristics of drug discovery. We suggest potential motivations for organizations to join an open source drug discovery project. We also examine specific differences between software and medicines, specifically how the need for laboratories and physical goods will impact the model as well as the effect of patents. PMID:21955914

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rodriguez, J.R.; Ahrens, J.S.; Lowe, D.L.

Throughout the years, Sandia National Laboratories (SNL) has performed various laboratory evaluations of entry control devices, including biometric identity verifiers. The reports which resulted from this testing have been very well received by the physical security community. This same community now requires equally informative field study data. To meet this need we have conducted a field study in an effort to develop the tools and methods which our customers can use to translate laboratory data into operational field performance. The field testing described in this report was based on the Recognition Systems Inc.`s (RSI) model ID3D HandKey biometric verifier. Thismore » device was selected because it is referenced in DOE documents such as the Guide for Implementation of the DOE Standard Badge and is the de facto biometric standard for the DOE. The ID3D HandKey is currently being used at several DOE sites such as Hanford, Rocky Flats, Pantex, Savannah River, and Idaho Nuclear Engineering Laboratory. The ID3D HandKey was laboratory tested at SNL. It performed very well during this test, exhibiting an equal error point of 0.2 percent. The goals of the field test were to identify operational characteristics and design guidelines to help system engineers translate laboratory data into field performance. A secondary goal was to develop tools which could be used by others to evaluate system effectiveness or improve the performance of their systems. Operational characteristics were determined by installing a working system and studying its operation over a five month period. Throughout this test we developed tools which could be used by others to similarly gauge system effectiveness.« less

Performance Verification of Production-Scalable Energy-Efficient Solutions: Winchester/Camberley Homes Mixed-Humid Climate

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mallay, D.; Wiehagen, J.

2014-07-01

Winchester/Camberley Homes collaborated with the Building America team Partnership for Home Innovation to develop a new set of high performance home designs that could be applicable on a production scale. The new home designs are to be constructed in the mixed humid climate zone and could eventually apply to all of the builder's home designs to meet or exceed future energy codes or performance-based programs. However, the builder recognized that the combination of new wall framing designs and materials, higher levels of insulation in the wall cavity, and more detailed air sealing to achieve lower infiltration rates changes the moisturemore » characteristics of the wall system. In order to ensure long term durability and repeatable successful implementation with few call-backs, the project team demonstrated through measured data that the wall system functions as a dynamic system, responding to changing interior and outdoor environmental conditions within recognized limits of the materials that make up the wall system. A similar investigation was made with respect to the complete redesign of the HVAC systems to significantly improve efficiency while maintaining indoor comfort. Recognizing the need to demonstrate the benefits of these efficiency features, the builder offered a new house model to serve as a test case to develop framing designs, evaluate material selections and installation requirements, changes to work scopes and contractor learning curves, as well as to compare theoretical performance characteristics with measured results.« less

Use of the Interview in Resident Candidate Selection: A Review of the Literature.

PubMed

Stephenson-Famy, Alyssa; Houmard, Brenda S; Oberoi, Sidharth; Manyak, Anton; Chiang, Seine; Kim, Sara

2015-12-01

Although the resident candidate interview is costly and time-consuming for both applicants and programs, it is considered critically important for resident selection. Noncognitive attributes, including communication skills and professionalism, can be assessed by the personal interview. We conducted a review of the literature on the residency interview to identify the interview characteristics used for resident selection and to ascertain to what extent the interview yields information that predicts future performance. We searched PubMed and Scopus using the following search terms: residency, internship, interview, selection, and performance. We extracted information on characteristics of the interview process, including type of interview format, measures taken to minimize bias by interviewers, and testing of other clinical/surgical skills. We identified 104 studies that pertained to the resident selection interview, with highly varied interview formats and assessment tools. A positive correlation was demonstrated between a medical school academic record and the interview, especially for unblinded interview formats. A total of 34 studies attempted to correlate interview score with performance in residency, with mixed results. We also identified a number of studies that included personality testing, clinical skills testing, or surgical skills testing. Our review identified a wide variety of approaches to the selection interview and a range of factors that have been studied to assess its effectiveness. More research needs to be done not only to address and ascertain appropriate interview formats that predict positive performance in residency, but also to determine interview factors that can predict both residents' "success" and program attrition.