48 CFR 1509.170-6 - Filing of forms.

Code of Federal Regulations, 2010 CFR

2010-10-01

... Section 1509.170-6 Federal Acquisition Regulations System ENVIRONMENTAL PROTECTION AGENCY ACQUISITION PLANNING CONTRACTOR QUALIFICATIONS Contractor Performance Evaluations 1509.170-6 Filing of forms. The original copy of completed Contractor Performance Reports (interim and final) shall be filed in each...

Children's perception of their synthetically corrected speech production.

PubMed

Strömbergsson, Sofia; Wengelin, Asa; House, David

2014-06-01

We explore children's perception of their own speech - in its online form, in its recorded form, and in synthetically modified forms. Children with phonological disorder (PD) and children with typical speech and language development (TD) performed tasks of evaluating accuracy of the different types of speech stimuli, either immediately after having produced the utterance or after a delay. In addition, they performed a task designed to assess their ability to detect synthetic modification. Both groups showed high performance in tasks involving evaluation of other children's speech, whereas in tasks of evaluating one's own speech, the children with PD were less accurate than their TD peers. The children with PD were less sensitive to misproductions in immediate conjunction with their production of an utterance, and more accurate after a delay. Within-category modification often passed undetected, indicating a satisfactory quality of the generated speech. Potential clinical benefits of using corrective re-synthesis are discussed.

Effects of task performance, helping, voice, and organizational loyalty on performance appraisal ratings.

PubMed

Whiting, Steven W; Podsakoff, Philip M; Pierce, Jason R

2008-01-01

Despite the fact that several studies have investigated the relationship between organizational citizenship behavior and performance appraisal ratings, the vast majority of these studies have been cross-sectional, correlational investigations conducted in organizational settings that do not allow researchers to establish the causal nature of this relationship. To address this lack of knowledge regarding causality, the authors conducted 2 studies designed to investigate the effects of task performance, helping behavior, voice, and organizational loyalty on performance appraisal evaluations. Findings demonstrated that each of these forms of behavior has significant effects on performance evaluation decisions and suggest that additional attention should be directed at both voice and organizational loyalty as important forms of citizenship behavior aimed at the organization. 2008 APA

Small form factor optical fiber connector evaluation for harsh environments

NASA Astrophysics Data System (ADS)

Ott, Melanie N.; Thomes, W. Joe, Jr.; Chuska, Richard F.; Switzer, Robert; Blair, Diana E.

2011-09-01

For the past decade NASA programs have utilized the Diamond AVIM connector for optical fiber assemblies on space flight instrumentation. These connectors have been used in communications, sensing and LIDAR systems where repeatability and high performance are required. Recently Diamond has released a smaller form factor optical fiber connector called the "Mini-AVIM" which although more compact still includes the tight tolerances and the ratcheting feature of the heritage AVIM. NASA Goddard Space Flight Center Photonics Group in the Parts, Packaging and Assembly Technologies Office has been performing evaluations of this connector to determine how it compares to the performance of the AVIM connector and to assess its feasibility for harsh environmental applications. Vibration and thermal testing were performed on the Mini-AVIM with both multi-mode and single-mode optical fiber using insitu optical transmission monitoring. Random vibration testing was performed using typical launch condition profiles for most NASA missions but extended to 35 Grms, which is much higher than most requirements. Thermal testing was performed incrementally up to a range of -55°C to +125°C. The test results include both unjacketed fiber and cabled assembly evaluations. The data presented here indicate that the Mini-AVIM provides a viable option for small form factor applications that require a high performance optical fiber connector.

A New Tool for Identifying Research Standards and Evaluating Research Performance

ERIC Educational Resources Information Center

Bacon, Donald R.; Paul, Pallab; Stewart, Kim A.; Mukhopadhyay, Kausiki

2012-01-01

Much has been written about the evaluation of faculty research productivity in promotion and tenure decisions, including many articles that seek to determine the rank of various marketing journals. Yet how faculty evaluators combine journal quality, quantity, and author contribution to form judgments of a scholar's performance is unclear. A…

Cast Stone Formulation for Nuclear Waste Immobilization at Higher Sodium Concentrations

DOE PAGES

Fox, Kevin; Cozzi, Alex; Roberts, Kimberly; ...

2014-11-01

Low activity radioactive waste at U.S. Department of Energy sites can be immobilized for permanent disposal using cementitious waste forms. This study evaluated waste forms produced with simulated wastes at concentrations up to twice that of currently operating processes. The simulated materials were evaluated for their fresh properties, which determine processability, and cured properties, which determine waste form performance. The results show potential for greatly reducing the volume of material. Fresh properties were sufficient to allow for processing via current practices. Cured properties such as compressive strength meet disposal requirements. Leachability indices provide an indication of expected long-term performance.

Evaluating the performance of free-formed surface parts using an analytic network process

NASA Astrophysics Data System (ADS)

Qian, Xueming; Ma, Yanqiao; Liang, Dezhi

2018-03-01

To successfully design parts with a free-formed surface, the critical issue of how to evaluate and select a favourable evaluation strategy before design is raised. The evaluation of free-formed surface parts is a multiple criteria decision-making (MCDM) problem that requires the consideration of a large number of interdependent factors. The analytic network process (ANP) is a relatively new MCDM method that can systematically deal with all kinds of dependences. In this paper, the factors, which come from the life-cycle and influence the design of free-formed surface parts, are proposed. After analysing the interdependence among these factors, a Hybrid ANP (HANP) structure for evaluating the part’s curved surface is constructed. Then, a HANP evaluation of an impeller is presented to illustrate the application of the proposed method.

The Effects of Band Labels on Evaluators' Judgments of Musical Performance

ERIC Educational Resources Information Center

Silvey, Brian A.

2009-01-01

This study investigates the effects of band labels on evaluators' judgments of musical performance. High school concert band members (n = 72), wind ensemble members ( n = 77), and band directors (n = 8) were randomly assigned to a band label or no label group. Only the band label group was given evaluation forms that specified the group playing…

An ICU Preanesthesia Evaluation Form Reduces Missing Preoperative Key Information.

PubMed

Chuy, Katherine; Yan, Zhe; Fleisher, Lee; Liu, Renyu

2012-09-28

A comprehensive preoperative evaluation is critical for providing anesthetic care for patients from the intensive care unit (ICU). There has been no preoperative evaluation form specific for ICU patients that allows for a rapid and focused evaluation by anesthesia providers, including junior residents. In this study, a specific preoperative form was designed for ICU patients and evaluated to allow residents to perform the most relevant and important preoperative evaluations efficiently. The following steps were utilized for developing the preoperative evaluation form: 1) designed a new preoperative form specific for ICU patients; 2) had the form reviewed by attending physicians and residents, followed by multiple revisions; 3) conducted test releases and revisions; 4) released the final version and conducted a survey; 5) compared data collection from new ICU form with that from a previously used generic form. Each piece of information on the forms was assigned a score, and the score for the total missing information was determined. The score for each form was presented as mean ± standard deviation (SD), and compared by unpaired t test. A P value < 0.05 was considered statistically significant. Of 52 anesthesiologists (19 attending physicians, 33 residents) responding to the survey, 90% preferred the final new form; and 56% thought the new form would reduce perioperative risk for ICU patients. Forty percent were unsure whether the form would reduce perioperative risk. Over a three month period, we randomly collected 32 generic forms and 25 new forms. The average score for missing data was 23 ± 10 for the generic form and 8 ± 4 for the new form (P = 2.58E-11). A preoperative evaluation form designed specifically for ICU patients is well accepted by anesthesia providers and helped to reduce missing key preoperative information. Such an approach is important for perioperative patient safety.

Development of An Assessment Test for An Anesthetic Machine.

PubMed

Tiviraj, Supinya; Yokubol, Bencharatana; Amornyotin, Somchai

2016-05-01

The study is aimed to develop and assess the quality of an evaluation form used to evaluate the nurse anesthetic trainees' skills in undertaking a pre-use check of an anesthetic machine. An evaluation form comprising 25 items was developed, informed by the guidelines published by national anesthesiologist societies and refined to reflect the anesthetic machine used in our institution. The item-checking included the cylinder supplies and medical gas pipelines, vaporizer back bar, ventilator anesthetic breathing system, scavenging system and emergency back-up equipment. The authors sought the opinions of five experienced anesthetic trainers to judge the validity of the content. The authors measured its inter-rater reliability when used by two achievement scores evaluating the performance of 36 nurse anesthetic trainees undertaking 15-minute anesthetic machine checks and test-retest the reliability correlation scores between the two performances in the seven days interval. The five experienced anesthesiologists agreed that the evaluation form accurately reflected the objectives of anesthetic machine checking, equating to an index of congruency of 1.00. The inter-rater reliability of the independent assessors scoring was 0.977 (p = 0.01) and the test-retest reliability was 0.883 (p = 0.01). An evaluation form proved to be a reliable and effective tool for assessing the anesthetic nurse trainees' checking of an anesthetic machine before the use. This evaluation form was brief clear and practical to use, and should help to improve anesthetic nurse education and the patient safety.

Motivation in vigilance - Effects of self-evaluation and experimenter-controlled feedback.

NASA Technical Reports Server (NTRS)

Warm, J. S.; Kanfer, F. H.; Kuwada, S.; Clark, J. L.

1972-01-01

Vigilance experiments have been performed to study the relative efficiency of feedback operations in enhancing vigilance performance. Two feedback operations were compared - i.e., experimenter-controlled feedback in the form of knowledge of results (KR) regarding response times to signal detections, and subject-controlled feedback in the form of self-evaluation (SE) of response times to signal detections. The subjects responded to the aperiodic offset of a visual signal during a 1-hr vigil. Both feedback operations were found to enhance performance efficiency: subjects in the KR and SE conditions had faster response times than controls receiving no evaluative feedback. Moreover, the data of the KR and SE groups did not differ significantly from each other. The results are discussed in terms of the hypothesis that self-evaluation is a critical factor underlying the incentive value of KR in vigilance tasks.

A commercial application of fire retardants to dry-formed hardboards

Treesearch

Gary C. Meyers; Carlton A. Holmes

1977-01-01

Based on laboratory performance with a number of fire-retardant chemicals, disodium octaborate tetrahydrate-boric acid and dicyandiamide-phosphoric acid-formaldehyde were selected for treating fiber and making 4 foot by 8-foot dry-formed hardboards on a commercial production line. The boards were evaluated for performance under exposure to fire, strength, dimensional...

DOE Office of Scientific and Technical Information (OSTI.GOV)

Salama, A.; Mikhail, M.

Comprehensive software packages have been developed at the Western Research Centre as tools to help coal preparation engineers analyze, evaluate, and control coal cleaning processes. The COal Preparation Software package (COPS) performs three functions: (1) data handling and manipulation, (2) data analysis, including the generation of washability data, performance evaluation and prediction, density and size modeling, evaluation of density and size partition characteristics and attrition curves, and (3) generation of graphics output. The Separation ChARacteristics Estimation software packages (SCARE) are developed to balance raw density or size separation data. The cases of density and size separation data are considered. Themore » generated balanced data can take the balanced or normalized forms. The scaled form is desirable for direct determination of the partition functions (curves). The raw and generated separation data are displayed in tabular and/or graphical forms. The computer softwares described in this paper are valuable tools for coal preparation plant engineers and operators for evaluating process performance, adjusting plant parameters, and balancing raw density or size separation data. These packages have been applied very successfully in many projects carried out by WRC for the Canadian coal preparation industry. The software packages are designed to run on a personal computer (PC).« less

Knee extension isometric torque production differences based on verbal motivation given to introverted and extroverted female children.

PubMed

McWhorter, J Wesley; Landers, Merrill; Young, Daniel; Puentedura, E Louie; Hickman, Robbin A; Brooksby, Candi; Liveratti, Marc; Taylor, Lisa

2011-08-01

To date, little research has been conducted to test the efficacy of different forms of motivation based on a female child's personality type. The purpose of this study was to evaluate the ability of female children to perform a maximal knee extension isometric torque test with varying forms of motivation, based on the child's personality type (introvert vs. extrovert). The subjects were asked to perform a maximal isometric knee extension test under three different conditions: 1) with no verbal motivation, 2) with verbal motivation from the evaluator only, and 3) with verbal motivation from a group of their peers and the evaluator combined. A 2×3 mixed ANOVA was significant for an interaction (F 2,62=17.530; p<0.0005). Post hoc testing for the introverted group showed that scores without verbal motivation were significantly higher than with verbal motivation from the evaluator or the evaluator plus the peers. The extroverted group revealed that scores with verbal motivation from the evaluator or the evaluator plus the peers were significantly higher than without verbal motivation. Results suggest that verbal motivation has a varying effect on isometric knee extension torque production in female children with different personality types. Extroverted girls perform better with motivation, whereas introverted girls perform better without motivation from others.

Closed-Form Evaluation of Mutual Coupling in a Planar Array of Circular Apertures

NASA Technical Reports Server (NTRS)

Bailey, M. C.

1996-01-01

The integral expression for the mutual admittance between circular apertures in a planar array is evaluated in closed form. Very good accuracy is realized when compared with values that were obtained by numerical integration. Utilization of this closed-form expression, for all element pairs that are separated by more than one element spacing, yields extremely accurate results and significantly reduces the computation time that is required to analyze the performance of a large electronically scanning antenna array.

76 FR 33397 - 60-Day Notice of Proposed Information Collection: DS-4131 Advance Notification Form: Tourist and...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-08

... Advance Notification Form: Tourist and Other Non-Governmental Activities in the Antarctic Treaty Area... of Information Collection: Advance Notification Form: Tourist and Other Non-Governmental Activities... proposed information collection is necessary for the proper performance of our functions. Evaluate the...

Building China's municipal healthcare performance evaluation system: a Tuscan perspective.

PubMed

Li, Hao; Barsanti, Sara; Bonini, Anna

2012-08-01

Regional healthcare performance evaluation systems can help optimize healthcare resources on regional basis and improve the performance of healthcare services provided. The Tuscany region in Italy is a good example of an institution which meets these requirements. China has yet to build such a system based on international experience. In this paper, based on comparative studies between Tuscany and China, we propose that the managing institutions in China's experimental cities can select and commission a third-party agency to, respectively, evaluate the performance of their affiliated hospitals and community health service centers. Following some features of the Tuscan experience, the Chinese municipal healthcare performance evaluation system can be built by focusing on the selection of an appropriate performance evaluation agency, the design of an adequate performance evaluation mechanism and the formulation of a complete set of laws, rules and regulations. When a performance evaluation system at city level is formed, the provincial government can extend the successful experience to other cities.

Development of a short-form Learning Organization Survey: the LOS-27.

PubMed

Singer, Sara J; Moore, Scott C; Meterko, Mark; Williams, Sandra

2012-08-01

Despite urgent need for innovation, adaptation, and change in health care, few tools enable researchers or practitioners to assess the extent to which health care facilities perform as learning organizations or the effects of initiatives that require learning. This study's objective was to develop and test a short-form Learning Organization Survey to fill this gap. The authors applied exploratory factor analysis and confirmatory factor analysis to data from Veterans Health Administration personnel to derive a short-form survey and then conducted further confirmatory factor analysis and factor invariance testing on additional Veterans Health Administration data to evaluate the short form. Results suggest that a 27-item, 7-factor survey (2 environmental factors, 1 on leadership, and 4 on concrete learning processes and practices) reliably measures key features of organizational learning, allowing researchers to evaluate theoretical propositions about organizational learning, its antecedents, and outcomes and enabling managers to assess and enhance organizations' learning capabilities and performance.

Broadening the Educational Evaluation Lens with Communicative Evaluation

ERIC Educational Resources Information Center

Brooks-LaRaviere, Margaret; Ryan, Katherine; Miron, Luis; Samuels, Maurice

2009-01-01

Outcomes-based accountability in the form of test scores and performance indicators are a primary lever for improving student achievement in the current educational landscape. The article presents communicative evaluation as a complementary evaluation approach that may be used along with the primary methods of school accountability to provide a…

Evaluation of Physicians' Requests for Autopsies.

ERIC Educational Resources Information Center

Kesler, Richard W.; And Others

1983-01-01

Chaplains and seminary students enrolled in the University of Virginia Medical Center's Clinical Pastoral Program were asked to judge physicians' performances while requesting autopsies by completing a confidential evaluation form. The results of the evaluations were correlated with the physicians' success in obtaining autopsies. (MLW)

The relationship between the managerial skills and results of "performance evaluation "tool among nursing managers in teaching hospitals of Iran University of Medical Science.

PubMed

Isfahani, Haleh Mousavi; Aryankhesal, Aidin; Haghani, Hamid

2014-09-25

Performance of different organizations, such as hospitals is mainly influenced by their managers' performance. Nursing managers have an important role in hospital performance and their managerial skills can improve the quality of the services. Hence, the present study was conducted in order to assess the relationship between the managerial skills and the results of their performance evaluation in Teaching Hospitals of Iran University of Medical Science in 2013. The research used the cross sectional method in 2013. It was done by distributing a managerial skills assessment questionnaire, with close-ended questions in 5 choice Likert scale, among 181 managers and head nurses of hospitals of Iran university of Medical Sciences; among which 131 answered the questions. Another data collection tools was a forms to record evaluation marks from the personnel records. We used Pearson and Spearman correlation tests and SPSS for analysis and description (frequency, mean and standard deviation). Results showed that the managerial skills of the nursing mangers were fair (2.57 out of 5) and the results of the performance evaluation were in a good condition (98.44). The mangers' evaluation results and the managerial skills scores were not in a meaningful correlation (r=0.047 np=0.856). The research showed no correlation between different domains of managerial skills and the performance evaluation marks: decision making skills (r=0.074 and p=0.399), leadership (correlation coefficient 0.028 and p=0.654), motivation (correlation coefficient 0.118 and p=0.163), communication  (correlation coefficient 0.116 and p=0.122), systematic thinking  (correlation coefficient 0.028 and p=0.828), time management (correlation coefficient 0.077 and p=0.401) and strategic thinking  (correlation coefficient 0.041 and p=0.756). Lack of any correlation and relation between managers' managerial skills and their performance evaluation results shows need to a fundamental revision at managers' performance evaluation form.

The Impact of the Perceived Purpose of Electronic Performance Monitoring on an Array of Attitudinal Variables

ERIC Educational Resources Information Center

Wells, Deborah L.; Moorman, Robert H.; Werner, Jon M.

2007-01-01

As a form of performance monitoring, electronic performance monitoring (EPM) offers the opportunity for unobtrusive and continuous performance data gathering. These strengths can also make EPM stressful and threatening. Many features of performance evaluation systems, including the organizational purposes for which they are used, can affect…

Translation and Validation of the Korean Version of the International Knee Documentation Committee Subjective Knee Form

PubMed Central

Kim, Jin Goo; Lee, Joong Yub; Seo, Seung Suk; Choi, Choong Hyeok; Lee, Myung Chul

2013-01-01

Purpose To perform a cross-cultural adaptation and to test the measurement properties of the Korean version of International Knee Documentation Committee (K-IKDC) Subjective Knee Form. Materials and Methods According to the guidelines for cross-cultural adaptation, translation and backward translation of the English version of the IKDC Subjective Knee Form were performed. After translation into the Korean version, 150 patients who had knee-related problems were asked to complete the K-IKDC, Lysholm score, and Short Form-36 (SF-36). Of these patients, 126 were retested 2 weeks later to evaluate test-retest reliability, and 104 were recruited 3 months later to evaluate responsiveness. Construct validity was analyzed by investigating the correlation with Lysholm score and SF-36; content validity was also evaluated. Standardized mean response was calculated for evaluating responsiveness. Results The test-retest reliability proved excellent with a high value for the intraclass correlation coefficient (r=0.94). The internal consistency was strong (Cronbach's α=0.91). Good content validity with absence of floor not ceiling effects and good convergent and divergent validity were observed. Moderate responsiveness was shown (standardized mean response=0.689). Conclusions The K-IKDC demonstrated good measurement properties. We suggest that this instrument is an excellent evaluation instrument that can be used for Korean patients with knee-related injuries. PMID:24032098

A clinical study to evaluate the correlation between maxillary central incisor tooth form and face form in an Indian population.

PubMed

Koralakunte, Pavankumar R; Budihal, Dhanyakumar H

2012-09-01

A study was performed to examine the correlation between maxillary central incisor tooth form and face form in males and females in an Indian population. The selection of prosthetic teeth for edentulous patients is a primary issue in denture esthetics, especially in the case of maxillary central incisors, which are the most prominent teeth in the arch. Two hundred dental students of Indian origin comprising 79 males and 121 females aged 18-28 years studying at Bapuji Dental College and Hospital were randomly selected as the study subjects. A standardized photographic procedure was used to obtain images of the face and the maxillary central incisors. The outline forms of the face and the maxillary right central incisor tooth were determined using a standardized method. The outline forms obtained were used to classify both face form and tooth form on the basis of visual and William's methods. The means were considered after evaluation by five prosthodontists, and the results were tabulated. Statistical analysis was performed using the chi-squared test for association and Z-test for equality of proportions. A correlation greater than 50% was observed between tooth form and face form by the visual method, compared with one of 31.5% by William's method. There was no highly defined correlation between maxillary central incisor tooth form and face form among the male and female Indian subjects studied.

Set covering algorithm, a subprogram of the scheduling algorithm for mission planning and logistic evaluation

NASA Technical Reports Server (NTRS)

Chang, H.

1976-01-01

A computer program using Lemke, Salkin and Spielberg's Set Covering Algorithm (SCA) to optimize a traffic model problem in the Scheduling Algorithm for Mission Planning and Logistics Evaluation (SAMPLE) was documented. SCA forms a submodule of SAMPLE and provides for input and output, subroutines, and an interactive feature for performing the optimization and arranging the results in a readily understandable form for output.

Permeation studies through porcine small intestine of furosemide solutions for personalised paediatric administration.

PubMed

Provenza, N; Calpena, A C; Mallandrich, M; Sánchez, A; Egea, M A; Clares, B

2014-11-20

Personalized medicine is a challenging research area in paediatric drug design since no suitable pharmaceutical forms are currently available. Furosemide is an anthranilic acid derivative used in paediatric practice to treat cardiac and pulmonary disorders in premature infants and neonates. However, it is not commercialized in suitable dosage forms for paediatrics. Elaborating new paediatric formulations when no commercial forms are available is a common practice in pharmacy laboratories; amongst these, oral liquid formulations are the most common. We developed two extemporaneous paediatric oral solutions of furosemide (pure powder). The characterization and stability study were also performed. Parameters such as organoleptic characteristics, rheology, pH, content of active substance, and microbial stability were evaluated at three temperatures for two months. Evaluation of all these parameters showed that both solutions were stable for 60 days at 4 and 25 °C. Moreover, ex vivo studies were performed to evaluate the permeation behaviour of developed solutions through porcine small intestine to evaluate the potential paediatric biological parameters influencing the bioavailability and efficacy. A validated spectrofluorometric method was also used for this purpose. Our results guarantee a correct dosification, administration and potential efficacy of furosemide when is formulated in liquid oral forms for the treatment of cardiac and pulmonary disorders in children. Copyright © 2014 Elsevier B.V. All rights reserved.

Guide to conducting tinnitus retraining therapy initial and follow-up interviews.

PubMed

Henry, James A; Jastreboff, Margaret M; Jastreboff, Pawel J; Schechter, Martin A; Fausti, Stephen A

2003-01-01

Tinnitus Retraining Therapy (TRT) is a structured method of tinnitus treatment that has been performed since 1990. The TRT Initial Interview form was developed to guide clinicians in obtaining essential information from patients that would specify treatment needs. The TRT Follow-up Interview form is similar to the initial interview form and is designed to evaluate outcomes of treatment. The clinician administers these forms verbally. The forms have been used in a highly abbreviated format with the potential for inconsistent interview administration between examiners. This project was to expand the forms to provide specific wording for each question. The expanded forms are presented in this article, and the intent of each question is explained. Standardized administration of these interview forms will facilitate greater uniformity in the initial evaluation and outcomes analyses of patients treated with TRT.

Trends in Teacher Evaluation: What Every Special Education Teacher Should Know

ERIC Educational Resources Information Center

Benedict, Amber E; Thomas, Rachel A.; Kimerling, Jenna; Leko, Christopher

2013-01-01

The article reflects on current methods of teacher evaluation within the context of recent accountability policy, specifically No Child Left Behind. An overview is given of the most common forms of teacher evaluation, including performance evaluations, checklists, peer review, portfolios, the CEC and InTASC standards, the Charlotte Danielson…

The Use of Social Survey Data in the Development of Formative Evaluations.

ERIC Educational Resources Information Center

York, John D.

Evaluators who perform formative evaluations would be well served to apprise themselves of recent survey research in framing formative evaluations. Illustrative examples are used from research into such diverse areas of activity as: the development of identities attached to different forms of modern rock and roll; the rationales that juvenile…

Reliability-Based Stability Analysis of Rock Slopes Using Numerical Analysis and Response Surface Method

NASA Astrophysics Data System (ADS)

Dadashzadeh, N.; Duzgun, H. S. B.; Yesiloglu-Gultekin, N.

2017-08-01

While advanced numerical techniques in slope stability analysis are successfully used in deterministic studies, they have so far found limited use in probabilistic analyses due to their high computation cost. The first-order reliability method (FORM) is one of the most efficient probabilistic techniques to perform probabilistic stability analysis by considering the associated uncertainties in the analysis parameters. However, it is not possible to directly use FORM in numerical slope stability evaluations as it requires definition of a limit state performance function. In this study, an integrated methodology for probabilistic numerical modeling of rock slope stability is proposed. The methodology is based on response surface method, where FORM is used to develop an explicit performance function from the results of numerical simulations. The implementation of the proposed methodology is performed by considering a large potential rock wedge in Sumela Monastery, Turkey. The accuracy of the developed performance function to truly represent the limit state surface is evaluated by monitoring the slope behavior. The calculated probability of failure is compared with Monte Carlo simulation (MCS) method. The proposed methodology is found to be 72% more efficient than MCS, while the accuracy is decreased with an error of 24%.

Impact of facial form on the relationship between conventional or implant-assisted mandibular dentures and masticatory function.

PubMed

Ochiai, Kent T; Hojo, Satoru; Nakamura, Camille; Ikeda, Hideki; Garrett, Neal R

2011-04-01

It is not clear if the interaction of craniofacial form with type of prosthetic restoration (conventional or implant-assisted) is related to masticatory function in complete denture patients. The purpose of this study was to investigate the relationships among facial form, skeletal class, alveolar residual ridge heights and masticatory function in subjects treated with implant-assisted or conventional mandibular dentures with lateral cephalometric evaluation. Data from a previously reported randomized controlled clinical trial were accessed to compare treatment success rates, functional and perceptual outcomes, dietary intake, and craniofacial relationships between mandibular complete dentures and implant overdentures in edentulous diabetic subjects. Evaluation of the digitized post-insertion lateral cephalometric radiographs provided measures of facial form (mesocephalic "medium", brachycephalic "broad and square", dolichocephalic "vertical and long"), skeletal class (Class I, Class II, Class III), and alveolar ridge height (mm), which were compared to results of standardized masticatory tests as evaluated using MANOVA and REGW post-hoc evaluation (α=.05). Masticatory performance on the preferred side was slightly reduced in the dolichocephalic group, compared to brachycephalic and mesocephalic groups (P=.085). Swallowing threshold performance was significantly less in skeletal Class II subjects compared to Class I (P=.034). Maxillary residual alveolar ridge height was significantly less in the brachycephalic group compared to the dolichocephalic group (P<.001). No differences in mandibular ridge height were seen associated with facial form or skeletal class groups. Facial form may be related to masticatory function with conventional and implant-assisted mandibular dentures, but larger controlled studies are needed to confirm this relationship. Alveolar ridge height is reduced in edentulous subjects with a brachycephalic facial form. Copyright © 2011 The Editorial Council of the Journal of Prosthetic Dentistry. Published by Mosby, Inc. All rights reserved.

An analysis of alumni performance: A study of the quality of nursing education.

PubMed

Altuntaş, Serap; Baykal, Ülkü

2017-02-01

The professional performance level of their alumni is one of the quality indicators of educational institutions. Nursing education institutions can use their alumni's performance analysis results to enhance their curricula, eliminate deficiencies, improve the quality of education and graduate more highly qualified nurses. This is a descriptive, cross-sectional and comparative study, which aimed to determine the professional performances of nurses who graduated from the same nursing faculty. The study sample included alumni of Turkey's first nursing faculty, part of the nation's first public university in Istanbul, and their administrative supervisors. The study data were collected using the self-assessment forms of 314 alumni who worked as bedside nurses in 36 Istanbul hospitals, and 314 evaluations by the 195 nurse managers who supervised them. The study's response rate was 82.6%. To collect the study data, the researchers created a performance evaluation form based on the relevant literature. The same form was administered both to the nurse managers and the alumni. The researchers obtained ethical board approval and official permissions from the relevant hospitals to conduct the study. The study data were analyzed by a statistics expert. According to the study results, the alumni's perceptions of themselves as well as the nurse managers' perceptions of the alumni were different from those of the other nurses with undergraduate degrees in terms of professional knowledge, expectations and ideals. The performance evaluation results showed that the alumni evaluated themselves more positively than their managers did. It was determined that there were highly significant differences (p=0.000) between the values provided by the five sub-dimensions of the scale and the total scale. In addition, the performance level was low in the sub-dimension focusing on research, and there was a significant difference in this sub-dimension (p=0.040). The study found that the alumni mainly had better evaluations of their own performances than their nurse managers, and that the research skills of the alumni should be enhanced. Copyright © 2016 Elsevier Ltd. All rights reserved.

How Are You Doing? The Elements of Effective Performance Management

ERIC Educational Resources Information Center

Kelley, Jessica

2012-01-01

Whether an employee is a top performer or at risk of dismissal, clear and consistent feedback plays a key role in his or her professional development. Informal and formal feedback are crucial throughout an employee's tenure. Through the use of formal performance evaluation forms and regular performance discussion meetings, employees and managers…

78 FR 22552 - Agency Forms Undergoing Paperwork Reduction Act Review

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-16

... Evaluation Program (MPEP) for Mycobacterium tuberculosis and Nontuberculous Mycobacteria Drug Susceptibility... tuberculosis (TB), prevention of multi- drug resistance, and surveillance programs, CDC is requesting approval... Performance Evaluation Program for Mycobacterium tuberculosis and Non-tuberculous Mycobacterium Drug...

Validity and reliability of the robotic objective structured assessment of technical skills

PubMed Central

Siddiqui, Nazema Y.; Galloway, Michael L.; Geller, Elizabeth J.; Green, Isabel C.; Hur, Hye-Chun; Langston, Kyle; Pitter, Michael C.; Tarr, Megan E.; Martino, Martin A.

2015-01-01

Objective Objective structured assessments of technical skills (OSATS) have been developed to measure the skill of surgical trainees. Our aim was to develop an OSATS specifically for trainees learning robotic surgery. Study Design This is a multi-institutional study in eight academic training programs. We created an assessment form to evaluate robotic surgical skill through five inanimate exercises. Obstetrics/gynecology, general surgery, and urology residents, fellows, and faculty completed five robotic exercises on a standard training model. Study sessions were recorded and randomly assigned to three blinded judges who scored performance using the assessment form. Construct validity was evaluated by comparing scores between participants with different levels of surgical experience; inter- and intra-rater reliability were also assessed. Results We evaluated 83 residents, 9 fellows, and 13 faculty, totaling 105 participants; 88 (84%) were from obstetrics/gynecology. Our assessment form demonstrated construct validity, with faculty and fellows performing significantly better than residents (mean scores: 89 ± 8 faculty; 74 ± 17 fellows; 59 ± 22 residents, p<0.01). In addition, participants with more robotic console experience scored significantly higher than those with fewer prior console surgeries (p<0.01). R-OSATS demonstrated good inter-rater reliability across all five drills (mean Cronbach's α: 0.79 ± 0.02). Intra-rater reliability was also high (mean Spearman's correlation: 0.91 ± 0.11). Conclusions We developed an assessment form for robotic surgical skill that demonstrates construct validity, inter- and intra-rater reliability. When paired with standardized robotic skill drills this form may be useful to distinguish between levels of trainee performance. PMID:24807319

Transient multivariable sensor evaluation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vilim, Richard B.; Heifetz, Alexander

A method and system for performing transient multivariable sensor evaluation. The method and system includes a computer system for identifying a model form, providing training measurement data, generating a basis vector, monitoring system data from sensor, loading the system data in a non-transient memory, performing an estimation to provide desired data and comparing the system data to the desired data and outputting an alarm for a defective sensor.

Forming Student Online Teams for Maximum Performance

ERIC Educational Resources Information Center

Olson, Joel D.; Ringhand, Darlene G.; Kalinski, Ray C.; Ziegler, James G.

2015-01-01

What is the best way to assign graduate business students to online team-based projects? Team assignments are frequently made on the basis of alphabet, time zones or previous performance. This study reviews personality as an indicator of student online team performance. The personality assessment IDE (Insights Discovery Evaluator) was administered…

Evaluating roadway subsurface drainage practices - phase II : [tech transfer summary].

DOT National Transportation Integrated Search

2015-04-01

The presence of subsurface drainage systems (e.g., granular bases or : outlets) is generally believed to be beneficial to the performance of : various pavement types. Well-performing subsurface drainage systems : form an important aspect of pavement ...

Surgery resident selection and evaluation. A critical incident study.

PubMed

Edwards, J C; Currie, M L; Wade, T P; Kaminski, D L

1993-03-01

This article reports a study of the process of selecting and evaluating general surgery residents. In personnel psychology terms, a job analysis of general surgery was conducted using the Critical Incident Technique (CIT). The researchers collected 235 critical incidents through structured interviews with 10 general surgery faculty members and four senior residents. The researchers then directed the surgeons in a two-step process of sorting the incidents into categories and naming the categories. The final essential categories of behavior to define surgical competence were derived through discussion among the surgeons until a consensus was formed. Those categories are knowledge/self-education, clinical performance, diagnostic skills, surgical skills, communication skills, reliability, integrity, compassion, organization skills, motivation, emotional control, and personal appearance. These categories were then used to develop an interview evaluation form for selection purposes and a performance evaluation form to be used throughout residency training. Thus a continuum of evaluation was established. The categories and critical incidents were also used to structure the interview process, which has demonstrated increased interview validity and reliability in many other studies. A handbook for structuring the interviews faculty members conduct with applicants was written, and an interview training session was held with the faculty. The process of implementation of the structured selection interviews is being documented currently through qualitative research.

Conductor gestures influence evaluations of ensemble performance

PubMed Central

Morrison, Steven J.; Price, Harry E.; Smedley, Eric M.; Meals, Cory D.

2014-01-01

Previous research has found that listener evaluations of ensemble performances vary depending on the expressivity of the conductor’s gestures, even when performances are otherwise identical. It was the purpose of the present study to test whether this effect of visual information was evident in the evaluation of specific aspects of ensemble performance: articulation and dynamics. We constructed a set of 32 music performances that combined auditory and visual information and were designed to feature a high degree of contrast along one of two target characteristics: articulation and dynamics. We paired each of four music excerpts recorded by a chamber ensemble in both a high- and low-contrast condition with video of four conductors demonstrating high- and low-contrast gesture specifically appropriate to either articulation or dynamics. Using one of two equivalent test forms, college music majors and non-majors (N = 285) viewed sixteen 30 s performances and evaluated the quality of the ensemble’s articulation, dynamics, technique, and tempo along with overall expressivity. Results showed significantly higher evaluations for performances featuring high rather than low conducting expressivity regardless of the ensemble’s performance quality. Evaluations for both articulation and dynamics were strongly and positively correlated with evaluations of overall ensemble expressivity. PMID:25104944

Repeated Low Teaching Evaluations: A Form of Habitual Behaviour?

ERIC Educational Resources Information Center

Grayson, J. Paul

2015-01-01

Teaching evaluations have become part of life on Canadian campuses; however, there is no agreement among researchers as to their validity. In this article, comparisons were made between first- and third-year collective evaluations of professors' performance at the University of British Columbia, York University, and McGill University. Overall, it…

Inter-rater Agreement of End-of-shift Evaluations Based on a Single Encounter

PubMed Central

Warrington, Steven; Beeson, Michael; Bradford, Amber

2017-01-01

Introduction End-of-shift evaluation (ESE) forms, also known as daily encounter cards, represent a subset of encounter-based assessment forms. Encounter cards have become prevalent for formative evaluation, with some suggesting a potential for summative evaluation. Our objective was to evaluate the inter-rater agreement of ESE forms using a single scripted encounter at a conference of emergency medicine (EM) educators. Methods Following institutional review board exemption, we created a scripted video simulating an encounter between an intern and a patient with an ankle injury. That video was shown during a lecture at the Council of EM Residency Director’s Academic Assembly with attendees asked to evaluate the “resident” using one of eight possible ESE forms randomly distributed. Descriptive statistics were used to analyze the results with Fleiss’ kappa to evaluate inter-rater agreement. Results Most of the 324 respondents were leadership in residency programs (66%), with a range of 29–47 responses per evaluation form. Few individuals (5%) felt they were experts in assessing residents based on EM milestones. Fleiss’ kappa ranged from 0.157 – 0.308 and did not perform much better in two post-hoc subgroup analyses. Conclusion The kappa ranges found show only slight to fair inter-rater agreement and raise concerns about the use of ESE forms in assessment of EM residents. Despite limitations present in this study, these results and a lack of other studies on inter-rater agreement of encounter cards should prompt further studies of such methods of assessment. Additionally, EM educators should focus research on methods to improve inter-rater agreement of ESE forms or other evaluating other methods of assessment of EM residents. PMID:28435505

Processing of Derived Forms in High-Functioning Dyslexics

ERIC Educational Resources Information Center

Deacon, S. Helene; Parrila, Rauno; Kirby, John R.

2006-01-01

We report on an experiment designed to evaluate processing of derived forms in high-functioning dyslexics, defined as university students with a history of reading difficulties who have age-appropriate reading comprehension skills. We compared high-functioning dyslexics with a group of normal adult readers in their performance on a lexical…

High-performance lighting evaluated by photobiological parameters.

PubMed

Rebec, Katja Malovrh; Gunde, Marta Klanjšek

2014-08-10

The human reception of light includes image-forming and non-image-forming effects which are triggered by spectral distribution and intensity of light. Ideal lighting is similar to daylight, which could be evaluated by spectral or chromaticity match. LED-based and CFL-based lighting were analyzed here, proposed according to spectral and chromaticity match, respectively. The photobiological effects were expressed by effectiveness for blue light hazard, cirtopic activity, and photopic vision. Good spectral match provides light with more similar effects to those obtained by the chromaticity match. The new parameters are useful for better evaluation of complex human responses caused by lighting.

Self tuning system for industrial surveillance

DOEpatents

Stephan, Wegerich W; Jarman, Kristin K.; Gross, Kenneth C.

2000-01-01

A method and system for automatically establishing operational parameters of a statistical surveillance system. The method and system performs a frequency domain transition on time dependent data, a first Fourier composite is formed, serial correlation is removed, a series of Gaussian whiteness tests are performed along with an autocorrelation test, Fourier coefficients are stored and a second Fourier composite is formed. Pseudorandom noise is added, a Monte Carlo simulation is performed to establish SPRT missed alarm probabilities and tested with a synthesized signal. A false alarm test is then emperically evaluated and if less than a desired target value, then SPRT probabilities are used for performing surveillance.

UAS Pilot Evaluations of Suggestive Guidance on Detect-and-Avoid Displays

NASA Technical Reports Server (NTRS)

Monk, Kevin; Roberts, Zachary

2016-01-01

Minimum display requirements for Detect-and-Avoid (DAA) systems are being developed in order to support the expansion of Unmanned Aircraft Systems (UAS) into the National Airspace System (NAS). The present study examines UAS pilots' subjective assessments of four DAA display configurations with varying forms of maneuver guidance. For each configuration, pilots rated the intuitiveness of the display and how well it supported their ability to perform the DAA task. Responses revealed a clear preference for the DAA displays that presented suggestive maneuver guidance in the form of "banding" compared to an Information Only display, which lacked any maneuver guidance. Implications on DAA display requirements, as well as the relation between the subjective evaluations and the objective performance data from previous studies are discussed.

UAS Pilot Evaluations of Suggestive Guidance on Detect-and-Avoid Displays

NASA Technical Reports Server (NTRS)

Monk, Kevin J.; Roberts, Zachary

2016-01-01

Minimum display requirements for Detect-and-Avoid (DAA) systems are being developed in order to support the expansion of Unmanned Aircraft Systems (UAS) into the National Airspace System (NAS). The present study examines UAS pilots subjective assessments of four DAA display configurations with varying forms of maneuver guidance. For each configuration, pilots rated the intuitiveness of the display and how well it supported their ability to perform the DAA task. Responses revealed a clear preference for the DAA displays that presented suggestive maneuver guidance in the form of banding compared to an Information Only display, which lacked any maneuver guidance. Implications on DAA display requirements, as well as the relation between the subjective evaluations and the objective performance data from previous studies are discussed.

A Psychometric Evaluation of the STAI-Y, BDI-II, and PAI Using Single and Multifactorial Models in Young Adults Seeking Psychoeducational Evaluation

ERIC Educational Resources Information Center

Hill, Benjamin D.; Musso, Mandi; Jones, Glenn N.; Pella, Russell D.; Gouvier, Wm. Drew

2013-01-01

A psychometric evaluation on the measurement of self-report anxiety and depression using the Beck Depression Inventory (BDI-II), State Trait Anxiety Inventory, Form-Y (STAI-Y), and the Personality Assessment Inventory (PAI) was performed using a sample of 534 generally young adults seeking psychoeducational evaluation at a university-based clinic.…

Performance-Based Assessment Resource Guide.

ERIC Educational Resources Information Center

Gilbert, Judith C.; Burger, Patricia

This resource guide reviews a variety of performance-based student assessment strategies, and provides examples of, and references for, the strategies. Strategies include anecdotal records, interviews, peer report and group evaluations, and portfolios. Materials in the guide include: (1) a resource guide update form for teachers; (2) department…

Persistent Ratee Contaminants in Performance Appraisal.

ERIC Educational Resources Information Center

Van Fleet, David D.; Chamberlain, Howard

The hypothesis that conventional approaches to evaluating contaminants in performance appraisal overlook important individual ratee effects was examined. A rating form was developed that consisted of the following dimensions and behaviors: warmth; guided discourse or indirect teaching methods; control of subject matter; enthusiasm and reinforcing;…

KSC management training system project

NASA Technical Reports Server (NTRS)

Sepulveda, Jose A.

1993-01-01

The stated objectives for the summer of 1993 were: to review the Individual Development Plan Surveys for 1994 in order to automate the analysis of the Needs Assessment effort; and to develop and implement evaluation methodologies to perform ongoing program-wide course-to-course assessment. This includes the following: to propose a methodology to develop and implement objective, performance-based assessment instruments for each training effort; to mechanize course evaluation forms and develop software to facilitate the data gathering, analysis, and reporting processes; and to implement the methodology, forms, and software in at lease one training course or seminar selected among those normally offered in the summer at KSC. Section two of this report addresses the work done in regard to the Individual Development Plan Surveys for 1994. Section three presents the methodology proposed to develop and implement objective, performance-based assessment instruments for each training course offered at KSC.

Abscisic acid form, concentration, and application timing influence phenology and bud cold hardiness in Merlot grapevines

USDA-ARS?s Scientific Manuscript database

The effects of abscisic acid (ABA) form, concentration and application timing on bud cold hardiness, phenology and fruiting performance on ‘Merlot’ grapevines (Vitis vinifera) were evaluated in a three year field trial with site locations in British Columbia Canada, Ontario Canada, Washington U.S. ...

Childhood Motor Performance Traits on the Short Form Bruininks-Oseretsky Test.

ERIC Educational Resources Information Center

Broadhead, Geoffrey D.; Bruininks, Robert H.

1982-01-01

This paper describes the short form of the Bruininks-Oseretsky Test of Motor Proficiency, 14 items that measure motor skill development. The results of a standardization study of nonhandicapped students (5-14 years old) are presented. Uses of the test for evaluating students in need of special education are discussed. (PP)

75 FR 17151 - Agency Information Collection Activities: Submission for OMB Review; Comment Request, OMB No...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-05

.... 1660--NEW; FEMA Form 089-23, Buffer Zone Plan; FEMA Form 089-23A, Vulnerability Reduction Purchasing...-23A, Vulnerability Reduction Purchasing Plan. Abstract: The information collection activity is the... enables FEMA to evaluate applications and make award decisions, monitor ongoing performance and manage the...

FY16 Annual Accomplishments - Waste Form Development and Performance: Evaluation Of Ceramic Waste Forms - Comparison Of Hot Isostatic Pressed And Melt Processed Fabrication Methods

DOE Office of Scientific and Technical Information (OSTI.GOV)

Amoroso, J.; Dandeneau, C.

FY16 efforts were focused on direct comparison of multi-phase ceramic waste forms produced via melt processing and HIP methods. Based on promising waste form compositions previously devised at SRNL, simulant material was prepared at SRNL and a portion was sent to the Australian Nuclear Science and Technology Organization (ANSTO) for HIP treatments, while the remainder of the material was melt processed at SRNL. The microstructure, phase formation, elemental speciation, and leach behavior, and radiation stability of the fabricated ceramics was performed. In addition, melt-processed ceramics designed with different fractions of hollandite, zirconolite, perovskite, and pyrochlore phases were investigated. for performancemore » and properties.« less

MRI as a tool for evaluation of oral controlled release dosage forms.

PubMed

Dorożyński, Przemysław P; Kulinowski, Piotr; Młynarczyk, Anna; Stanisz, Greg J

2012-02-01

The magnetic resonance imaging (MRI) studies of controlled-release (CR) dosage forms can be roughly divided into two groups. The first comprises studies performed in static conditions (small solvent volumes and ambient temperature). Such studies have provided insight into molecular phenomena in hydrating polymeric matrices. The second group covers research performed in dynamic conditions (medium flow or stirring) related to drug dissolution. An important issue is supplementation of the MRI results with data obtained by complementary techniques, such as X-ray microtomography (μCT). As we discuss here, an understanding of the mechanism underlying the release of the drug from the dosage form will lead to the development of detailed, molecularly defined, CR dosage forms. Copyright © 2011 Elsevier Ltd. All rights reserved.

Evaluation of a biphasic in vitro dissolution test for estimating the bioavailability of carbamazepine polymorphic forms.

PubMed

Deng, Jia; Staufenbiel, Sven; Bodmeier, Roland

2017-07-15

The purpose of this study was to discriminate three crystal forms of carbamazepine (a BCS II drug) by in vitro dissolution testing and to correlate in vitro data with published in vivo data. A biphasic dissolution system (phosphate buffer pH6.8 and octanol) was used to evaluate the dissolution of the three polymorphic forms and to compare it with conventional single phase dissolution tests performed under sink and non-sink conditions. Similar dissolution profiles of three polymorphic forms were observed in the conventional dissolution test under sink conditions. Although a difference in dissolution was seen in the single phase dissolution test under non-sink conditions as well as in the aqueous phase of the biphasic test, little relevance for in vivo data was observed. In contrast, the biphasic dissolution system could discriminate between the different polymorphic forms in the octanol phase with a ranking of form III>form I>dihydrate form. This was in agreement with the in vivo performance. The dissolved drug available for oral absorption, which was dominated by dissolution and solution-mediated phase transformation, could be reflected in the biphasic dissolution test. Moreover, a good correlation was established between in vitro dissolution in the octanol phase of the biphasic test and in vivo pharmacokinetic data (R 2 =0.99). The biphasic dissolution method is a valuable tool to discriminate between different crystal forms in the formulations of poorly soluble drugs. Copyright © 2017. Published by Elsevier B.V.

Increasing Completion Rate of an M4 Emergency Medicine Student End-of-Shift Evaluation Using a Mobile Electronic Platform and Real-Time Completion.

PubMed

Tews, Matthew C; Treat, Robert W; Nanes, Maxwell

2016-07-01

Medical students on an emergency medicine rotation are traditionally evaluated at the end of each shift with paper-based forms, and data are often missing due to forms not being turned in or completed. Because students' grades depend on these evaluations, change was needed to increase form rate of return. We analyzed a new electronic evaluation form and modified completion process to determine if it would increase the completion rate without altering how faculty scored student performance. During fall 2013, 29 faculty completed paper N=339 evaluations consisting of seven competencies for 33 students. In fall 2014, an electronic evaluation form with the same competencies was designed using an electronic platform and completed N=319 times by 27 faculty using 25 students' electronic devices. Feedback checkboxes were added to facilitate collection of common comments. Data was analyzed with IBM® SPSS® 21.0 using multi-factor analysis of variance with the students' global rating (GR) as an outcome. Inter-item reliability was determined with Cronbach alpha. There was a significantly higher completion rate (p=0.001) of 98% electronic vs. 69% paper forms, lower (p=0.001) missed GR rate (1% electronic. vs 12% paper), and higher mean scores (p=0.001) for the GR with the electronic (7.0±1.1) vs. paper (6.8±1.2) form. Feedback checkboxes were completed on every form. The inter-item reliability for electronic and paper forms was each alpha=0.95. The use of a new electronic form and modified completion process for evaluating students at the end of shift demonstrated a higher faculty completion rate, a lower missed data rate, a higher global rating and consistent collection of common feedback. The use of the electronic form and the process for obtaining the information made our end-of-shift evaluation process for students more reliable and provided more accurate, up-to-date information for student feedback and when determining student grades.

Comprehensive Achievement Monitoring for Science. Symposium; National Association of Biology Teachers, San Francisco, California, October 27, 1972.

ERIC Educational Resources Information Center

White, Mona E.; And Others

Comprehensive Achievement Monitoring (CAM) is a system designed to provide a curriculum defined in terms of performance objectives, test items to measure student performance on each objective, a set of comparable test forms to evaluate performance, testing throughout the period of the course, computerized analysis and reporting of results after…

Final waste forms project: Performance criteria for phase I treatability studies

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gilliam, T.M.; Hutchins, D.A.; Chodak, P. III

1994-06-01

This document defines the product performance criteria to be used in Phase I of the Final Waste Forms Project. In Phase I, treatability studies will be performed to provide {open_quotes}proof-of-principle{close_quotes} data to establish the viability of stabilization/solidification (S/S) technologies. This information is required by March 1995. In Phase II, further treatability studies, some at the pilot scale, will be performed to provide sufficient data to allow treatment alternatives identified in Phase I to be more fully developed and evaluated, as well as to reduce performance uncertainties for those methods chosen to treat a specific waste. Three main factors influence themore » development and selection of an optimum waste form formulation and hence affect selection of performance criteria. These factors are regulatory, process-specific, and site-specific waste form standards or requirements. Clearly, the optimum waste form formulation will require consideration of performance criteria constraints from each of the three categories. Phase I will focus only on the regulatory criteria. These criteria may be considered the minimum criteria for an acceptable waste form. In other words, a S/S technology is considered viable only if it meet applicable regulatory criteria. The criteria to be utilized in the Phase I treatability studies were primarily taken from Environmental Protection Agency regulations addressed in 40 CFR 260 through 265 and 268; and Nuclear Regulatory Commission regulations addressed in 10 CFR 61. Thus the majority of the identified criteria are independent of waste form matrix composition (i.e., applicable to cement, glass, organic binders etc.).« less

Optical computation using residue arithmetic.

PubMed

Huang, A; Tsunoda, Y; Goodman, J W; Ishihara, S

1979-01-15

Using residue arithmetic it is possible to perform additions, subtractions, multiplications, and polynomial evaluation without the necessity for carry operations. Calculations can, therefore, be performed in a fully parallel manner. Several different optical methods for performing residue arithmetic operations are described. A possible combination of such methods to form a matrix vector multiplier is considered. The potential advantages of optics in performing these kinds of operations are discussed.

pySecDec: A toolbox for the numerical evaluation of multi-scale integrals

NASA Astrophysics Data System (ADS)

Borowka, S.; Heinrich, G.; Jahn, S.; Jones, S. P.; Kerner, M.; Schlenk, J.; Zirke, T.

2018-01-01

We present pySECDEC, a new version of the program SECDEC, which performs the factorization of dimensionally regulated poles in parametric integrals, and the subsequent numerical evaluation of the finite coefficients. The algebraic part of the program is now written in the form of python modules, which allow a very flexible usage. The optimization of the C++ code, generated using FORM, is improved, leading to a faster numerical convergence. The new version also creates a library of the integrand functions, such that it can be linked to user-specific codes for the evaluation of matrix elements in a way similar to analytic integral libraries.

Faculty Development Manual for the School of Allied Health Sciences, University of Texas Medical Branch at Galveston.

ERIC Educational Resources Information Center

Texas Univ., Galveston. Medical Branch.

The contents of this guide, adopted for a one-year pilot study, include: standard operating procedures for the faculty development/effectiveness document (performance and evaluation contract); instructions and forms for evaluating effectiveness in teaching, administrative duties, and professional activities; and a faculty…

The Interpretation of Student Performance on Evaluative Tests.

ERIC Educational Resources Information Center

Aikenhead, Glen S.

Reported is a study on the use of quantitative data in evaluating a science course for the purpose of introducing an alternative form of information presentation capable of supplying qualitative feedback valuable to students, teachers, and curriculum developers. Fifty-five teachers, randomly selected during the 1967-68 Project Physics (PP)…

Crystal forms of the hydrogen oxalate salt of o-desmethylvenlafaxine.

PubMed

Dichiarante, Elena; Curzi, Marco; Giaffreda, Stefano L; Grepioni, Fabrizia; Maini, Lucia; Braga, Dario

2015-06-01

To prepare new crystalline forms of the antidepressant o-desmethylvenlafaxine salt as potential new commercial forms and evaluate their physicochemical properties, in particular the dissolution rate. A new hydrogen oxalate salt of o-desmethylvenlafaxine hydrogen oxalate (ODV-OX) was synthesized, and a polymorph screening was performed using different solvents and crystallization conditions. Crystalline forms were characterized by a combination of solid-state techniques: X-ray powder diffraction, differential scanning calorimetry, thermogravimetric analysis, FT-IR spectroscopy and single crystal X-ray diffraction. The stability of all crystalline phases was tested under International Conference on Harmonisation (ICH) conditions (40°C and 75% Relative Humidity (RH)) for 1 week. Dissolution tests were performed on the hydrogen oxalate salt ODV-OX Form 1 and compared with dissolution test on the commercial form of the succinate salt of o-desmethylvenlafaxine. Five crystalline forms of ODV-OX were isolated, namely three hydrated forms (Form 1, Form 2, Form 3) and two anhydrous forms (Form 4 and Form 5). Comparative solubility tests on ODV-OX Form 1 and o-desmethylvenlafaxine succinate evidenced a significant increase in solubility for the hydrogen oxalate salt (142 g/l) with respect to the succinate salt (70 g/l). © 2015 Royal Pharmaceutical Society.

Swallowing Tablets and Capsules Increases the Risk of Penetration and Aspiration in Patients with Stroke-Induced Dysphagia.

PubMed

Schiele, Julia T; Penner, Heike; Schneider, Hendrik; Quinzler, Renate; Reich, Gabriele; Wezler, Nikolai; Micol, William; Oster, Peter; Haefeli, Walter E

2015-10-01

We evaluated the prevalence of difficulties swallowing solid dosage forms in patients with stroke-induced dysphagia and whether swallowing tablets/capsules increases their risk of penetration and aspiration. Concurrently, we explored whether routinely performed assessment tests help identify patients at risk. Using video endoscopy, we evaluated how 52 patients swallowed four different placebos (round, oval, and oblong tablets and a capsule) with texture-modified water (TMW, pudding consistency) and milk and rated their swallowing performance according to the Penetration Aspiration Scale (PAS). Additionally, Daniels Test, Bogenhausener Dysphagiescore, Scandinavian Stroke Scale, Barthel Index, and Tinetti's Mobility Test were conducted. A substantial proportion of the patients experienced severe difficulties swallowing solid oral dosage forms (TMW: 40.4 %, milk: 43.5 %). Compared to the administration of TMW/milk alone, the placebos increased the PAS values in the majority of the patients (TMW: median PAS from 1.5 to 2.0; milk: median PAS from 1.5 to 2.5, each p value <0.0001) and residue values were significantly higher (p < 0.05). Whereas video-endoscopic examination reliably identified patients with difficulties swallowing medication, neither patients' self-evaluation nor one of the routinely performed bedside tests did. Therefore, before video-endoscopic evaluation, many drugs were modified unnecessarily and 20.8 % of these were crushed inadequately, although switching to another dosage form or drug would have been possible. Hence, safety and effectiveness of swallowing tablets and capsules should be evaluated routinely in video-endoscopic examinations, tablets/capsules should rather be provided with TMW than with milk, and the appropriateness of "non per os except medication" orders for dysphagic stroke patients should be questioned.

Deductive Evaluation: Formal Code Analysis With Low User Burden

NASA Technical Reports Server (NTRS)

Di Vito, Ben. L

2016-01-01

We describe a framework for symbolically evaluating iterative C code using a deductive approach that automatically discovers and proves program properties. Although verification is not performed, the method can infer detailed program behavior. Software engineering work flows could be enhanced by this type of analysis. Floyd-Hoare verification principles are applied to synthesize loop invariants, using a library of iteration-specific deductive knowledge. When needed, theorem proving is interleaved with evaluation and performed on the fly. Evaluation results take the form of inferred expressions and type constraints for values of program variables. An implementation using PVS (Prototype Verification System) is presented along with results for sample C functions.

SiC Composite for Fuel Structure Applications

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yueh, Ken

Extensive evaluation was performed to determine the suitability of using SiC composite as a boiling water reactor (BWR) fuel channel material. A thin walled SiC composite box, 10 cm in dimension by approximately 1.5 mm wall thickness was fabricated using chemical vapor deposition (CVD) for testing. Mechanical test results and performance evaluations indicate the material could meet BWR channel mechanical design requirement. However, large mass loss of up to 21% was measured in in-pile corrosion test under BWR-like conditions in under 3 months of irradiation. A fresh sister sample irradiated in a follow-up cycle under PWR conditions showed no measureablemore » weight loss and thus supports the hypothesis that the oxidizing condition of the BWR-like coolant chemistry was responsible for the high corrosion rate. A thermodynamic evaluation showed SiC is not stable and the material may oxidize to form SiO 2 and CO 2. Silica has demonstrated stability in high temperature steam environment and form a protective oxide layer under severe accident conditions. However, it does not form a protective layer in water under normal BWR operational conditions due to its high solubility. Corrosion product stabilization by modifying the SiC CVD surface is an approach evaluated in this study to mitigate the high corrosion rate. Titanium and zirconium have been selected as stabilizing elements since both TiSiO 4 and ZrSiO 4 are insoluble in water. Corrosion test results in oxygenated water autoclave indicate TiSiO4 does not form a protective layer. However, zirconium doped test samples appear to form a stable continuous layer of ZrSiO 4 during the corrosion process. Additional process development is needed to produce a good ZrSiC coating to verify functionality of the mitigation concept.« less

Development and evaluation of a silver mordenite composite sorbent for the partitioning of xenon from krypton in gas compositions

DOE PAGES

Garn, Troy G.; Greenhalgh, Mitchell; Law, Jack D.

2015-12-22

A new engineered form composite sorbent for the selective separation of xenon from krypton in simulant composition off-gas streams resulting from the reprocessing of used nuclear fuel has been developed and evaluated. A sodium mordenite powder was incorporated into a macroporous polymer binder, formed into spherical beads and successfully converted to a 9 wt.% silver form composite sorbent. The final engineered form sorbent retained the characteristic surface area indicative of sodium mordenite powder. The sorbent was evaluated for xenon adsorption potential with capacities measured as high as 30 millimoles of xenon per kilogram of sorbent achieved at ambient temperature andmore » 460 millimoles of xenon per kilogram sorbent at 220 K. Xenon/krypton selectivity was calculated to be 22.4 with a 1020 µL/L xenon, 150 µL/L krypton in a balance of air feed gas at 220 K. Furthermore, adsorption/desorption thermal cycling effects were evaluated with results indicating sorbent performance was not significantly impacted while undergoing numerous adsorption/desorption thermal cycles.« less

Effects of overstocking at the feedbunk on the growth performance of replacement holstein dairy heifers

USDA-ARS?s Scientific Manuscript database

Various forms of overcrowding are common in heifer-rearing operations. Our objectives were to evaluate the effects of overstocking at the feedbunk (100, 133, 160, or 200% of capacity) on the voluntary intake, growth performance, feedbunk-sorting behaviors, displacements from the feedbunk, and hygien...

Technical Submission Form: Technical Specification of a Wave Energy Farm.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Roberts, Jesse D.; Nielsen, Kim; Kennedy, Ben

The Wave - SPARC project developed the Technology Performance Level (TPL) assessment procedure based on a rigorous Systems Engineering exercise. The TPL assessment allows a whole system evaluation of Wave Energy Conversion Technology by measuring it against the requirements determined through the Systems Engineering exercise. The TPL assessment is intended to be useful in technology evaluation; in technology innovation; in allocation of public or priva te investment, and; in making equipment purchasing decisions. This Technical Submission Form (TSF) serves the purpose of collecting relevant and complete information, in a technology agnostic way, to allow TPL assessment s to be mademore » by third party assessor s. The intended usage of this document is that the organization or people that are performing the role of developers or promoters of a particular technology will use this form to provide the information necessary for the organization or people who are perf orming the assessor role to use the TPL assessment.« less

Contrasting State-of-the-Art in the Machine Scoring of Short-Form Constructed Responses

ERIC Educational Resources Information Center

Shermis, Mark D.

2015-01-01

This study compared short-form constructed responses evaluated by both human raters and machine scoring algorithms. The context was a public competition on which both public competitors and commercial vendors vied to develop machine scoring algorithms that would match or exceed the performance of operational human raters in a summative high-stakes…

Flight tests for the assessment of task performance and control activity

NASA Technical Reports Server (NTRS)

Pausder, H. J.; Hummes, D.

1982-01-01

The tests were performed with the helicopters BO 105 and UH-1D. Closely connected with tactical demands the six test pilots' task was to minimize the time and the altitude over the obstacles. The data reduction yields statistical evaluation parameters describing the control activity of the pilots and the achieved task performance. The results are shown in form of evaluation diagrams. Additionally dolphin tests with varied control strategy were performed to get more insight into the influence of control techniques. From these test results recommendations can be derived to emphasize the direct force control and to reduce the collective to pitch crosscoupling for the dolphin.

Central Data Processing System (CDPS) user's manual: Solar heating and cooling program

NASA Technical Reports Server (NTRS)

1976-01-01

The software and data base management system required to assess the performance of solar heating and cooling systems installed at multiple sites is presented. The instrumentation data associated with these systems is collected, processed, and presented in a form which supported continuity of performance evaluation across all applications. The CDPS consisted of three major elements: communication interface computer, central data processing computer, and performance evaluation data base. Users of the performance data base were identified, and procedures for operation, and guidelines for software maintenance were outlined. The manual also defined the output capabilities of the CDPS in support of external users of the system.

Axially grooved heat pipe study

NASA Technical Reports Server (NTRS)

1977-01-01

A technology evaluation study on axially grooved heat pipes is presented. The state-of-the-art is reviewed and present and future requirements are identified. Analytical models, the Groove Analysis Program (GAP) and a closed form solution, were developed to facilitate parametric performance evaluations. GAP provides a numerical solution of the differential equations which govern the hydrodynamic flow. The model accounts for liquid recession, liquid/vapor shear interaction, puddle flow as well as laminar and turbulent vapor flow conditions. The closed form solution was developed to reduce computation time and complexity in parametric evaluations. It is applicable to laminar and ideal charge conditions, liquid/vapor shear interaction, and an empirical liquid flow factor which accounts for groove geometry and liquid recession effects. The validity of the closed form solution is verified by comparison with GAP predictions and measured data.

The establishment of the evaluation model for pupil's lunch suppliers

NASA Astrophysics Data System (ADS)

Lo, Chih-Yao; Hou, Cheng-I.; Ma, Rosa

2011-10-01

The aim of this study is the establishment of the evaluation model for the government-controlled private suppliers for school lunches in the public middle and primary schools in Miao-Li County. After finishing the literature search and the integration of the opinions from anonymous experts by Modified Delphi Method, the grade forms from relevant schools in and outside the Miao-Li County will firstly be collected and the delaminated structures for evaluation be constructed. Then, the data analysis will be performed on those retrieved questionnaires designed in accordance with the Analytic Hierarchy Process (AHP). Finally, the evaluation form for the government-controlled private suppliers can be constructed and presented in the hope of benefiting the personnel in charge of school meal purchasing.

Using Comprehensive Achievement Monitoring in the Classroom. Symposium; California Educational Research Association, San Jose, California, November 9, 1972.

ERIC Educational Resources Information Center

Easter, John; And Others

Comprehensive Achievement Monitoring (CAM) is a system designed to provide a curriculum defined in terms of performance objectives, test items to measure student performance on each objective, a set of comparable test forms to evaluate performance, testing throughout the period of the course, computerized analysis and reporting of results after…

Comprehensive Achievement Monitoring in the Sequoia Union High School District. Symposium, California Educational Data Processing Association, December 8, 1972.

ERIC Educational Resources Information Center

Easter, John; And Others

Comprehensive Achievement Monitoring (CAM) is a system designed to provide a curriculum defined in terms of performance objectives, test items to measure student performance on each objective, a set of comparable test forms to evaluate performance, testing throughout the period of course, computerized analysis and reporting of results after test…

Performance measures for transform data coding.

NASA Technical Reports Server (NTRS)

Pearl, J.; Andrews, H. C.; Pratt, W. K.

1972-01-01

This paper develops performance criteria for evaluating transform data coding schemes under computational constraints. Computational constraints that conform with the proposed basis-restricted model give rise to suboptimal coding efficiency characterized by a rate-distortion relation R(D) similar in form to the theoretical rate-distortion function. Numerical examples of this performance measure are presented for Fourier, Walsh, Haar, and Karhunen-Loeve transforms.

The Differential Effects of Elaborate Feedback and Basic Feedback on Student Performance in a Modified, Personalized System of Instruction Course

ERIC Educational Resources Information Center

Chase, Jared A.; Houmanfar, Ramona

2009-01-01

Educators in large-enrollment courses are faced with the challenge of effectively disseminating information to their students to ensure that they learn the content provided. A related issue involves the means by which instructors evaluate student performance. Offering effective forms of performance feedback may be one technique to provide students…

Using Team-Based Learning to Teach Grade 7 Biology: Student Satisfaction and Improved Performance

ERIC Educational Resources Information Center

Jarjoura, Christiane; Tayeh, Paula Abou; Zgheib, Nathalie K.

2015-01-01

Team-based learning (TBL) is an innovative form of collaborative learning. The purpose of this study was to evaluate TBL's effect on the performance and satisfaction of grade 7 students in biology in a private school in Lebanon, as well as teachers' willingness to implement this new methodology. An exploratory study was performed whereby two…

Development and Test Evaluations for Ni-DOBDC Metal Organic Framework (MOF) Engineered Forms

DOE Office of Scientific and Technical Information (OSTI.GOV)

Troy G. Garn; Mitchell Greenhalgh

2013-07-01

A joint effort to prepare engineered forms of a Ni-DOBDC metal organic framework (MOF) was completed with contributions from PNNL, SNL and the INL. Two independent methods were used at INL and SNL to prepare engineered form (EF) sorbents from Ni-DOBDC MOF powder developed and prepared at PNNL. Xe and Kr capacity test evaluations were performed at ambient temperature with the cryostat experimental setup at INL. The initial INL EF MOF test results indicated a Xe capacity of 1.6 mmol/kg sorbent and no Kr capacity. A large loss of surface area also occurred during minimal testing rendering the INL EFmore » MOF unusable. Four capacity tests were completed using the SNL EF MOF at ambient temperature and resulted in Xe capacities of 1.4, 4.2, 5.0 and 3.8 mmol/kg sorbent with no Kr capacity observed in any ambient temperature tests. Two additional capacity tests were performed at 240 K to further evaluate SNL EF MOF performance. Xe capacities of 50.7 and 49.3 mmol/kg of sorbent and Kr capacities of 0.77 and 0.69 mmol/kg of sorbent were obtained, respectively. Following the adsorption evaluations, the SNL EF MOF material had lost about 40 % of the initial mass and 40 % of the initial surface area. In general, the Xe capacity results at ambient temperature for the INL and SNL EF Ni-DOBDC MOF’s were lower than 9.8 mmol Xe/kg sorbent test results reported by INL in FY-12 using PNNL’s inital EF supplied material.« less

Credit Risk Evaluation of Large Power Consumers Considering Power Market Transaction

NASA Astrophysics Data System (ADS)

Fulin, Li; Erfeng, Xu; ke, Sun; Dunnan, Liu; Shuyi, Shen

2018-03-01

Large power users will participate in power market in various forms after power system reform. Meanwhile, great importance has always attached to the construction of the credit system in power industry. Due to the difference between the awareness of performance and the ability to perform, credit risk of power customer will emerge accordingly. Therefore, it is critical to evaluate credit risk of large power customers in the new situation of power market. Firstly, this paper constructs index system of credit risk of large power customers, and establishes evaluation model of interval number and AHP-entropy weight method.

OPPE, FPPE, QPS, and why the alphabet soup of physician assessment is essential for safer patient care.

PubMed

Loftus, Michael L

Creating a successful quality and patient safety program requires a multifaceted approach that systematically reviews overall systems and processes, but also creates a standardized framework for evaluating individual practitioner performance on a routine basis. There are two required elements of competency assessment that are typically tied to the hospital credentialing process: ongoing professional practice evaluation (OPPE) and focused professional practice evaluation (FPPE). Each of these processes are mandated by the Joint Commission, and form an important cornerstone for ensuring adequate physician performance and knowledge base. Copyright © 2017. Published by Elsevier Inc.

49 CFR 192.803 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-10-01

... process, established and documented by the operator, to determine an individual's ability to perform a...) Simulations; (e) Other forms of assessment. Qualified means that an individual has been evaluated and can: (a...

49 CFR 195.503 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-10-01

... persons, property, or the environment. Evaluation means a process, established and documented by the...) performance on the job, (2) on the job training, or (3) simulations; (e) Other forms of assessment. Qualified...

48 CFR 245.603-70 - Contractor performance of plant clearance duties.

Code of Federal Regulations, 2010 CFR

2010-10-01

... Government-furnished property from inventory schedules; (v) Evaluate physical, quantitative, and technical allocability of contractor inventory prior to disposal using Standard Form 1423, Inventory Verification Survey...

Reporter-Interpreter-Manager-Educator (RIME) descriptive ratings as an evaluation tool in an emergency medicine clerkship.

PubMed

Ander, Douglas S; Wallenstein, Joshua; Abramson, Jerome L; Click, Lorie; Shayne, Philip

2012-10-01

Emergency Medicine (EM) clerkships traditionally assess students using numerical ratings of clinical performance. The descriptive ratings of the Reporter, Interpreter, Manager, and Educator (RIME) method have been shown to be valuable in other specialties. We hypothesized that the RIME descriptive ratings would correlate with clinical performance and examination scores in an EM clerkship, indicating that the RIME ratings are a valid measure of performance. This was a prospective cohort study of an evaluation instrument for 4(th)-year medical students completing an EM rotation. This study received exempt Institutional Review Board status. EM faculty and residents completed shift evaluation forms including both numerical and RIME ratings. Students completed a final examination. Mean scores for RIME and clinical evaluations were calculated. Linear regression models were used to determine whether RIME ratings predicted clinical evaluation scores or final examination scores. Four hundred thirty-nine students who completed the EM clerkship were enrolled in the study. After excluding items with missing data, there were 2086 evaluation forms (based on 289 students) available for analysis. There was a clear positive relationship between RIME category and clinical evaluation score (r(2)=0.40, p<0.01). RIME ratings correlated most strongly with patient management skills and least strongly with humanistic qualities. A very weak correlation was seen with RIME and final examination. We found a positive association between RIME and clinical evaluation scores, suggesting that RIME is a valid clinical evaluation instrument. RIME descriptive ratings can be incorporated into EM evaluation instruments and provides useful data related to patient management skills. Copyright © 2012 Elsevier Inc. All rights reserved.

Is there a core neural network in empathy? An fMRI based quantitative meta-analysis.

PubMed

Fan, Yan; Duncan, Niall W; de Greck, Moritz; Northoff, Georg

2011-01-01

Whilst recent neuroimaging studies have identified a series of different brain regions as being involved in empathy, it remains unclear concerning the activation consistence of these brain regions and their specific functional roles. Using MKDA, a whole-brain based quantitative meta-analysis of recent fMRI studies of empathy was performed. This analysis identified the dACC-aMCC-SMA and bilateral anterior insula as being consistently activated in empathy. Hypothesizing that what are here termed affective-perceptual and cognitive-evaluative forms of empathy might be characterized by different activity patterns, the neural activations in these forms of empathy were compared. The dorsal aMCC was demonstrated to be recruited more frequently in the cognitive-evaluative form of empathy, whilst the right anterior insula was found to be involved in the affective-perceptual form of empathy only. The left anterior insula was active in both forms of empathy. It was concluded that the dACC-aMCC-SMA and bilateral insula can be considered as forming a core network in empathy, and that cognitive-evaluative and affective-perceptual empathy can be distinguished at the level of regional activation. Copyright © 2010 Elsevier Ltd. All rights reserved.

Three-dimensional non-destructive optical evaluation of laser-processing performance using optical coherence tomography.

PubMed

Kim, Youngseop; Choi, Eun Seo; Kwak, Wooseop; Shin, Yongjin; Jung, Woonggyu; Ahn, Yeh-Chan; Chen, Zhongping

2008-06-01

We demonstrate the use of optical coherence tomography (OCT) as a non-destructive diagnostic tool for evaluating laser-processing performance by imaging the features of a pit and a rim. A pit formed on a material at different laser-processing conditions is imaged using both a conventional scanning electron microscope (SEM) and OCT. Then using corresponding images, the geometrical characteristics of the pit are analyzed and compared. From the results, we could verify the feasibility and the potential of the application of OCT to the monitoring of the laser-processing performance.

Three-dimensional non-destructive optical evaluation of laser-processing performance using optical coherence tomography

PubMed Central

Kim, Youngseop; Choi, Eun Seo; Kwak, Wooseop; Shin, Yongjin; Jung, Woonggyu; Ahn, Yeh-Chan; Chen, Zhongping

2014-01-01

We demonstrate the use of optical coherence tomography (OCT) as a non-destructive diagnostic tool for evaluating laser-processing performance by imaging the features of a pit and a rim. A pit formed on a material at different laser-processing conditions is imaged using both a conventional scanning electron microscope (SEM) and OCT. Then using corresponding images, the geometrical characteristics of the pit are analyzed and compared. From the results, we could verify the feasibility and the potential of the application of OCT to the monitoring of the laser-processing performance. PMID:24932051

Silicon materials task of the low cost solar array project, part 2

NASA Technical Reports Server (NTRS)

Hopkins, R. H.; Davis, J. R.; Rai-Choudhury, P.; Blais, P. D.; Mccormick, J. R.

1976-01-01

Purity requirements for solar cell grade silicon material was developed and defined by evaluating the effects of specific impurities and impurity levels on the performance of silicon solar cells. Also, data was generated forming the basis for cost-tradeoff analyses of silicon solar cell material. Growth, evaluation, solar cell fabrication and testing was completed for the baseline boron-doped Czochralski material. Measurements indicate Cn and Mn seriously degrade cell performance, while neither Ni nor Cu produce any serious reduction in cell efficiency.

Guidelines for the Evaluation of Dementia and Age-Related Cognitive Change

ERIC Educational Resources Information Center

American Psychologist, 2012

2012-01-01

Dementia in its many forms is a leading cause of functional limitation among older adults worldwide and will continue to ascend in global health importance as populations continue to age and effective cures remain elusive. The following guidelines were developed for psychologists who perform evaluations of dementia and age-related cognitive…

[Evaluation auditing of the quality of health care in accreditation of health facilities].

PubMed

Paim, Chennyfer da Rosa Paino; Zucchi, Paola

2011-01-01

This article shows how many health insurance companies operating in the Greater São Paulo have been performing auditing of the quality of their health care services, professionals, and which criteria are being employed to do so. Because of the legislation decreeing that health insurance companies have legal co-responsibility for the health care services and National Health Agency control the health services National Health Agency, auditing evaluations have been implemented since then. The survey was based on electronic forms e-mailed to all health insurance companies operating in the Greater São Paulo. The sample consisted of 125 health insurance companies; 29 confirmed that had monitoring and evaluation processes; 26 performed auditing of their services regularly; from those, 20 used some type of form or protocol for technical visits; all evaluation physical and administrative structure and 22 included functional structure. Regarding the professionals audited 21 were nurses, 13 administrative assistants; 04 managers and 02 doctors. Regarding criteria for accreditation the following were highlighted: region analysis (96%), localization (88.88%) and cost (36%). We conclude that this type of auditing evaluation is rather innovative and is being gradually implemented by the health insurance companies, but is not a systematic process.

Investigating the Evolution of Progressive Die Wear on Uncoated Dp1180 Steel in Production Environment

NASA Astrophysics Data System (ADS)

Wu, W.; Zhou, D. J.; Adamski, D. J.; Young, D.; Wang, Y. W.

2017-09-01

A study of die wear was performed using an uncoated dual phase, 1,180 MPa ultimate tensile strength steel (DP1180) in a progressive die. The objectives of the current study are to evaluate the die durability of various tooling materials and coatings for forming operations on uncoated DP1180 steel and update OEM’s die standards based on the experimental results in the real production environment. In total, 100,800 hits were performed in manufacturing production conditions, where 33 die inserts with the combination of 10 die materials and 9 coatings were investigated. The die inserts were evaluated for surface wear using scanning electron microscopy and characterized in terms of die material and/or coating defects, failure mode, failure initiation and propagation. Surface roughness of the formed parts was characterized using a WYKO NT110 machine. The analytical analysis of the die inserts and formed parts, combined with the failure mode and service life, provide a basis for die material and coating selection for forming AHSS components. The conclusions of this study will guide the selection of die material and coatings for high-volume production of AHSS components.

Comprehensive evaluation of the long-term performance of rubberized pavement, phase I : laboratory study of rubberized asphalt mix performance.

DOT National Transportation Integrated Search

2012-12-01

Crumb rubber, made from scrap tires, has been introduced into the production of different types of hot : mix asphalt (HMA) in either a wet or dry process. In the wet process, the crumb rubber and binder are : completely mixed to form asphalt rubber (...

ZEOLITE PERFORMANCE AS AN ANION EXCHANGER FOR ARSENIC SEQUESTRATION IN WATER

EPA Science Inventory

Zeolites are well known for their use in ion exchange and acid catalysis reactions. The use of zeolites in anion or ligand exchange reactions is less studied. The NH4+ form of zeolite Y (NY6, Faujasite) has been tested in this work to evaluate its performance for arsenic removal...

Working Memory, Attention, Inhibition, and Their Relation to Adaptive Functioning and Behavioral/Emotional Symptoms in School-Aged Children

ERIC Educational Resources Information Center

Vuontela, Virve; Carlson, Synnove; Troberg, Anna-Maria; Fontell, Tuija; Simola, Petteri; Saarinen, Suvi; Aronen, Eeva T.

2013-01-01

The present study investigated the development of executive functions (EFs) and their associations with performance and behavior at school in 8-12-year-old children. The EFs were measured by computer-based n-back, Continuous Performance and Go/Nogo tasks. School performance was evaluated by Teacher Report Form (TRF) and behavior by TRF and Child…

Diffusion and Leaching Behavior of Radionuclides in Category 3 Waste Encasement Concrete and Soil Fill Material – Summary Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mattigod, Shas V.; Wellman, Dawn M.; Bovaird, Chase C.

2011-08-31

One of the methods being considered for safely disposing of Category 3 low-level radioactive wastes is to encase the waste in concrete. Such concrete encasement would contain and isolate the waste packages from the hydrologic environment and would act as an intrusion barrier. The current plan for waste isolation consists of stacking low-level waste packages on a trench floor, surrounding the stacks with reinforced steel, and encasing these packages in concrete. These concrete-encased waste stacks are expected to vary in size with maximum dimensions of 6.4 m long, 2.7 m wide, and 4 m high. The waste stacks are expectedmore » to have a surrounding minimum thickness of 15 cm of concrete encasement. These concrete-encased waste packages are expected to withstand environmental exposure (solar radiation, temperature variations, and precipitation) until an interim soil cover or permanent closure cover is installed, and to remain largely intact thereafter. Any failure of concrete encasement may result in water intrusion and consequent mobilization of radionuclides from the waste packages. The mobilized radionuclides may escape from the encased concrete by mass flow and/or diffusion and move into the surrounding subsurface environment. Therefore, it is necessary to assess the performance of the concrete encasement structure and the ability of the surrounding soil to retard radionuclide migration. The retardation factors for radionuclides contained in the waste packages can be determined from measurements of diffusion coefficients for these contaminants through concrete and fill material. Some of the mobilization scenarios include (1) potential leaching of waste form before permanent closure cover is installed; (2) after the cover installation, long-term diffusion of radionuclides from concrete waste form into surrounding fill material; (3) diffusion of radionuclides from contaminated soils into adjoining concrete encasement and clean fill material. Additionally, the rate of diffusion of radionuclides may be affected by the formation of structural cracks in concrete, the carbonation of the buried waste form, and any potential effect of metallic iron (in the form of rebars) on the mobility of radionuclides. The radionuclides iodine-129 ({sup 129}I), technetium-99 ({sup 99}Tc), and uranium-238 ({sup 238}U) are identified as long-term dose contributors in Category 3 waste (Mann et al. 2001; Wood et al. 1995). Because of their anionic nature in aqueous solutions, {sup 129}I, {sup 99}Tc, and carbonate-complexed {sup 238}U may readily leach into the subsurface environment (Serne et al. 1989, 1992a, b, 1993, and 1995). The leachability and/or diffusion of radionuclide species must be measured to assess the long-term performance of waste grouts when contacted with vadose-zone pore water or groundwater. Although significant research has been conducted on the design and performance of cementitious waste forms, the current protocol conducted to assess radionuclide stability within these waste forms has been limited to the Toxicity Characteristic Leaching Procedure, Method 1311 Federal Registry (EPA 1992) and ANSI/ANS-16.1 leach test (ANSI 1986). These tests evaluate the performance under water-saturated conditions and do not evaluate the performance of cementitious waste forms within the context of waste repositories which are located within water-deficient vadose zones. Moreover, these tests assess only the diffusion of radionuclides from concrete waste forms and neglect evaluating the mechanisms of retention, stability of the waste form, and formation of secondary phases during weathering, which may serve as long-term secondary hosts for immobilization of radionuclides. The results of recent investigations conducted under arid and semi-arid conditions (Al-Khayat et al. 2002; Garrabrants et al. 2002; Garrabrants and Kosson 2003; Garrabrants et al. 2004; Gervais et al. 2004; Sanchez et al. 2002; Sanchez et al. 2003) provide valuable information suggesting structural and chemical changes to concrete waste forms which may affect contaminant containment and waste form performance. However, continued research is necessitated by the need to understand: the mechanism of contaminant release; the significance of contaminant release pathways; how waste form performance is affected by the full range of environmental conditions within the disposal facility; the process of waste form aging under conditions that are representative of processes occurring in response to changing environmental conditions within the disposal facility; the effect of waste form aging on chemical, physical, and radiological properties, and the associated impact on contaminant release. Recent reviews conducted by the National Academies of Science recognized the efficacy of cementitious materials for waste isolation, but further noted the significant shortcomings in our current understanding and testing protocol for evaluating the performance of various formulations.« less

Evaluation of Early-Age Concrete Compressive Strength with Ultrasonic Sensors.

PubMed

Yoon, Hyejin; Kim, Young Jin; Kim, Hee Seok; Kang, Jun Won; Koh, Hyun-Moo

2017-08-07

Surface wave velocity measurement of concrete using ultrasonic sensors requires testing on only one side of a member. Thus, it is applicable to concrete cast inside a form and is often used to detect flaws and evaluate the compressive strength of hardened concrete. Predicting the in situ concrete strength at a very early stage inside the form helps with determining the appropriate form removal time and reducing construction time and costs. In this paper, the feasibility of using surface wave velocities to predict the strength of in situ concrete inside the form at a very early stage was evaluated. Ultrasonic sensors were used to measure a series of surface waves for concrete inside a form in the first 24 h after placement. A continuous wavelet transform was used to compute the travel time of the propagating surface waves. The cylindrical compressive strength and penetration resistance tests were also performed during the test period. Four mixtures and five curing temperatures were used for the specimens. The surface wave velocity was confirmed to be applicable to estimating the concrete strength at a very early age in wall-like elements. An empirical formula is proposed for evaluating the early-age compressive strength of concrete considering the 95% prediction intervals.

Evaluation of Early-Age Concrete Compressive Strength with Ultrasonic Sensors

PubMed Central

Yoon, Hyejin; Kim, Young Jin; Kim, Hee Seok; Kang, Jun Won; Koh, Hyun-Moo

2017-01-01

Surface wave velocity measurement of concrete using ultrasonic sensors requires testing on only one side of a member. Thus, it is applicable to concrete cast inside a form and is often used to detect flaws and evaluate the compressive strength of hardened concrete. Predicting the in situ concrete strength at a very early stage inside the form helps with determining the appropriate form removal time and reducing construction time and costs. In this paper, the feasibility of using surface wave velocities to predict the strength of in situ concrete inside the form at a very early stage was evaluated. Ultrasonic sensors were used to measure a series of surface waves for concrete inside a form in the first 24 h after placement. A continuous wavelet transform was used to compute the travel time of the propagating surface waves. The cylindrical compressive strength and penetration resistance tests were also performed during the test period. Four mixtures and five curing temperatures were used for the specimens. The surface wave velocity was confirmed to be applicable to estimating the concrete strength at a very early age in wall-like elements. An empirical formula is proposed for evaluating the early-age compressive strength of concrete considering the 95% prediction intervals. PMID:28783128

Female athlete triad screening in National Collegiate Athletic Association Division I athletes: is the preparticipation evaluation form effective?

PubMed

Mencias, Tara; Noon, Megan; Hoch, Anne Z

2012-03-01

To evaluate the screening practices and preparticipation evaluation (PPE) forms used to identify college athletes at risk for the female athlete triad (triad). Phone and/or e-mail survey. National Collegiate Athletic Association (NCAA) Division I universities. All 347 NCAA Division I universities were invited to participate in a survey, with 257 participating in the survey (74%) and 287 forms collected (83%). Information about the nature of the PPE was requested from team physicians and certified athletic trainers during a phone or e-mail survey. In addition, a copy of their PPE form was requested to evaluate for inclusion of the 12 items recommended by the Female Athlete Triad Coalition for primary screening for the triad. All 257 universities (100%) required a PPE for incoming athletes; however, only 83 universities (32%) required an annual PPE for returning athletes. Screening was performed on campus at 218 universities (85%). Eleven universities (4%) were using the recently updated fourth edition PPE. Only 25 universities (9%) had 9 or more of the 12 recommended items included in their forms, whereas 127 universities (44%) included 4 or less items. Relevant items that were omitted from more than 40% of forms included losing weight to meet the image requirements of a sport; using vomiting, diuretics, and/or laxatives to lose weight; and the number of menses experienced in the past 12 months. The current PPE forms used by NCAA Division I universities may not effectively screen for the triad.

Development of RAD-Score: A Tool to Assess the Procedural Competence of Diagnostic Radiology Residents.

PubMed

Isupov, Inga; McInnes, Matthew D F; Hamstra, Stan J; Doherty, Geoffrey; Gupta, Ashish; Peddle, Susan; Jibri, Zaid; Rakhra, Kawan; Hibbert, Rebecca M

2017-04-01

The purpose of this study is to develop a tool to assess the procedural competence of radiology trainees, with sources of evidence gathered from five categories to support the construct validity of tool: content, response process, internal structure, relations to other variables, and consequences. A pilot form for assessing procedural competence among radiology residents, known as the RAD-Score tool, was developed by evaluating published literature and using a modified Delphi procedure involving a group of local content experts. The pilot version of the tool was tested by seven radiology department faculty members who evaluated procedures performed by 25 residents at one institution between October 2014 and June 2015. Residents were evaluated while performing multiple procedures in both clinical and simulation settings. The main outcome measure was the percentage of residents who were considered ready to perform procedures independently, with testing conducted to determine differences between levels of training. A total of 105 forms (for 52 procedures performed in a clinical setting and 53 procedures performed in a simulation setting) were collected for a variety of procedures (eight vascular or interventional, 42 body, 12 musculoskeletal, 23 chest, and 20 breast procedures). A statistically significant difference was noted in the percentage of trainees who were rated as being ready to perform a procedure independently (in postgraduate year [PGY] 2, 12% of residents; in PGY3, 61%; in PGY4, 85%; and in PGY5, 88%; p < 0.05); this difference persisted in the clinical and simulation settings. User feedback and psychometric analysis were used to create a final version of the form. This prospective study describes the successful development of a tool for assessing the procedural competence of radiology trainees with high levels of construct validity in multiple domains. Implementation of the tool in the radiology residency curriculum is planned and can play an instrumental role in the transition to competency-based radiology training.

75 FR 62913 - 30-Day Notice of Proposed Information Collection: Form DS-5504, Application for a U.S. Passport...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-13

... Department to: Evaluate whether the proposed information collection is necessary to properly perform our functions. Evaluate the accuracy of our estimate of the burden of the proposed collection, including the... the issuance of the passport (b) the passport holder needs correction of descriptive information on...

Written informed consent for living liver donor evaluation: compliance with Centers for Medicare and Medicaid Services and Organ Procurement and Transplantation Network Guidelines and alibi offers.

PubMed

Thiessen, Carrie; Kim, Yunsoo A; Yoo, Peter S; Rodriguez-Davalos, Manuel; Mulligan, David; Kulkarni, Sanjay

2014-04-01

We examined written informed consent forms for living liver donor evaluations to determine whether they incorporated elements required by the Centers for Medicare and Medicaid Services (CMS) and suggested by the Organ Procurement and Transplantation Network (OPTN). We contacted each of the 41 US centers that performed at least 1 living donor liver transplant in 2011; 37 centers reported active living donor evaluation programs. Twenty-six centers shared their consent form for living donor evaluation (response rate = 70%). Each document was double-coded for consent element content. We found that 57% of the centers included the 9 mandated CMS elements. Although the OPTN guidelines are non-binding, 78% of the centers used consent forms that addressed at least two-thirds of the elements recommended by OPTN. Only 17% of the centers provided written offers of an alibi to donors who withdrew from the evaluation. On the basis of our findings, we offer suggestions that may be relevant to ongoing revisions to the OPTN living liver donor consent policy and may help centers to improve the clarity of their written consent forms. © 2014 American Association for the Study of Liver Diseases.

The Influence of Visual Experience on the Ability to Form Spatial Mental Models Based on Route and Survey Descriptions

ERIC Educational Resources Information Center

Noordzij, Matthijs L.; Zuidhoek, Sander; Postma, Albert

2006-01-01

The purpose of the present study is twofold: the first objective is to evaluate the importance of visual experience for the ability to form a spatial representation (spatial mental model) of fairly elaborate spatial descriptions. Secondly, we examine whether blind people exhibit the same preferences (i.e. level of performance on spatial tasks) as…

Nickel hydrogen battery cell storage matrix test

NASA Technical Reports Server (NTRS)

Wheeler, James R.; Dodson, Gary W.

1993-01-01

Test were conducted to evaluate post storage performance of nickel hydrogen cells with various design variables, the most significant being nickel precharge versus hydrogen precharge. Test procedures and results are presented in outline and graphic form.

Evaluating roadway subsurface drainage practices - phase II.

DOT National Transportation Integrated Search

2015-04-01

Well-performing subsurface drainage systems form an important aspect of pavement design by the Iowa Department of : Transportation (DOT). The recently completed Iowa Highway Research Board (IHRB) project TR-643 provided extensive : insights into Iowa...

Effects of Training on the Test of Diagnostic Skills. Publication No. 30.

ERIC Educational Resources Information Center

Haley, John V.

This report summarizes research performed on the Test of Diagnostic Skills, used to evaluate the clinical diagnostic skills of medical students. Forms of the test were administered to groups at different levels of medical experience to ascertain the effect of training on performance. A cross-sectional study was conducted with approximately 90…

Effects of feed form and feed particle size with dietary L- threonine supplementation on performance, carcass characteristics and blood biochemical parameters of broiler chickens.

PubMed

Rezaeipour, Vahid; Gazani, Sepideh

2014-01-01

An experiment was conducted to evaluate the effect of form and particle size of feed supplemented with L- threonine on growth performance, carcass characteristic and blood biochemical parameters of broiler chickens. The experimental design was a 2 × 2 × 2 factorial arrangement of treatments evaluating two feed forms (pellet or mash), two feed particle sizes (fine or course), and two inclusion rates of dietary L-threonine (with or without) which adopted from 7 to 42 days of age. In this experiment, 360 a day old chicks in two sexes were assigned in each treatment and each experimental unit was included 15 chicks. Feed consumption and weight gain were measured weekly. At 35 days of age, blood samples were taken to analysis blood biochemical parameters. At the end of the experimental period, two birds were slaughtered in each treatment and carcass analysis was carried out. The results showed that the effect of feed form on body weight gain and feed intake in whole of experimental period was significant (P < 0.05). Broilers fed pelleted diets had more weight gain than the mash group. Growth performance parameters were not affected by feed particle size and dietary L-threonine supplementation in whole of experimental period (P > 0.05). The results of carcass analysis showed that liver and gizzard relative weights were influenced by feed form (P < 0.05). However, pancreas and liver relative weights were affected by feed particle size and dietary L-threonine supplementation, respectively (P < 0.05). Triglyceride and VLDL levels were affected by feed form and dietary L-threonine supplementation (P < 0.05). The effect of feed particle size on blood biochemical parameters was not significant (P > 0.05). In conclusion, the experimental results indicated that feed form increased feed consumption and weight gain in whole of experimental period (1 to 42 days of age) while feed particle size and dietary L-threonine had no effect on broiler performance.

Avoidance temperament and social-evaluative threat in college students' math performance: a mediation model of math and test anxiety.

PubMed

Liew, Jeffrey; Lench, Heather C; Kao, Grace; Yeh, Yu-Chen; Kwok, Oi-man

2014-01-01

Standardized testing has become a common form of student evaluation with high stakes, and limited research exists on understanding the roles of students' personality traits and social-evaluative threat on their academic performance. This study examined the roles of avoidance temperament (i.e., fear and behavioral inhibition) and evaluative threat (i.e., fear of failure and being viewed as unintelligent) in standardized math test and course grades in college students. Undergraduate students (N=184) from a large public university were assessed on temperamental fear and behavioral inhibition. They were then given 15 minutes to complete a standardized math test. After the test, students provided data on evaluative threat and their math performance (scores on standardized college entrance exam and average grades in college math courses). Results indicate that avoidance temperament was linked to social-evaluative threat and low standardized math test scores. Furthermore, evaluative threat mediated the influence of avoidance temperament on both types of math performance. Results have educational and clinical implications, particularly for students at risk for test anxiety and underperformance. Interventions targeting emotion regulation and stress management skills may help individuals reduce their math and test anxieties.

The Use of Animated Videos to Illustrate Oral Solid Dosage Form Manufacturing in a Pharmaceutics Course.

PubMed

Yellepeddi, Venkata Kashyap; Roberson, Charles

2016-10-25

Objective. To evaluate the impact of animated videos of oral solid dosage form manufacturing as visual instructional aids on pharmacy students' perception and learning. Design. Data were obtained using a validated, paper-based survey instrument designed to evaluate the effectiveness, appeal, and efficiency of the animated videos in a pharmaceutics course offered in spring 2014 and 2015. Basic demographic data were also collected and analyzed. Assessment data at the end of pharmaceutics course was collected for 2013 and compared with assessment data from 2014, and 2015. Assessment. Seventy-six percent of the respondents supported the idea of incorporating animated videos as instructional aids for teaching pharmaceutics. Students' performance on the formative assessment in 2014 and 2015 improved significantly compared to the performance of students in 2013 whose lectures did not include animated videos as instructional aids. Conclusions. Implementing animated videos of oral solid dosage form manufacturing as instructional aids resulted in improved student learning and favorable student perceptions about the instructional approach. Therefore, use of animated videos can be incorporated in pharmaceutics teaching to enhance visual learning.

The Use of Animated Videos to Illustrate Oral Solid Dosage Form Manufacturing in a Pharmaceutics Course

PubMed Central

Roberson, Charles

2016-01-01

Objective. To evaluate the impact of animated videos of oral solid dosage form manufacturing as visual instructional aids on pharmacy students’ perception and learning. Design. Data were obtained using a validated, paper-based survey instrument designed to evaluate the effectiveness, appeal, and efficiency of the animated videos in a pharmaceutics course offered in spring 2014 and 2015. Basic demographic data were also collected and analyzed. Assessment data at the end of pharmaceutics course was collected for 2013 and compared with assessment data from 2014, and 2015. Assessment. Seventy-six percent of the respondents supported the idea of incorporating animated videos as instructional aids for teaching pharmaceutics. Students’ performance on the formative assessment in 2014 and 2015 improved significantly compared to the performance of students in 2013 whose lectures did not include animated videos as instructional aids. Conclusions. Implementing animated videos of oral solid dosage form manufacturing as instructional aids resulted in improved student learning and favorable student perceptions about the instructional approach. Therefore, use of animated videos can be incorporated in pharmaceutics teaching to enhance visual learning. PMID:27899837

In-vitro simulation of luminal conditions for evaluation of performance of oral drug products: Choosing the appropriate test media.

PubMed

Markopoulos, Constantinos; Andreas, Cord J; Vertzoni, Maria; Dressman, Jennifer; Reppas, Christos

2015-06-01

Biorelevant media for evaluation of dosage form performance in the gastrointestinal lumen were first introduced in the late 1990s. Since then, a variety of additional media have been proposed, making it now possible to simulate most regions in the gastrointestinal tract in both prandial states. However, recent work suggests that the complexity and degree of biorelevance required to predict in-vivo release varies with the drug, dosage form and dosing conditions. The aim of this commentary was to establish which levels of biorelevant media are appropriate to various combinations of active pharmaceutical ingredient(s), dosage form and dosing conditions. With regard to their application, a decision tree for the selection of the appropriate biorelevant medium/media is proposed and illustrative case scenarios are provided. Additionally, media to represent the distal small intestine in both prandial states are presented. The newly proposed levels of biorelevance and accompanying decision tree may serve as a useful tool during formulation development in order to ensure high quality, predictive performance results without unnecessary complexity of media. In future work, further specific case examples will be evolved, which will additionally address the need to take gastrointestinal passage times and type and intensity of agitation into consideration. Copyright © 2015 Elsevier B.V. All rights reserved.

Orbital transfer vehicle concept definition and system analysis study. Volume 2: OTV concept definition and evaluation. Book 1: Mission and system requirements

NASA Technical Reports Server (NTRS)

Kofal, Allen E.

1987-01-01

The mission and system requirements for the concept definition and system analysis of the Orbital Transfer Vehicle (OTV) are established. The requirements set forth constitute the single authority for the selection, evaluation, and optimization of the technical performance and design of the OTV. This requirements document forms the basis for the Ground and Space Based OTV concept definition analyses and establishes the physical, functional, performance and design relationships to STS, Space Station, Orbital Maneuvering Vehicle (OMV), and payloads.

Analysis and evaluation in the production process and equipment area of the low-cost solar array project

NASA Technical Reports Server (NTRS)

Wolf, M.

1981-01-01

The effect of solar cell metallization pattern design on solar cell performance and the costs and performance effects of different metallization processes are discussed. Definitive design rules for the front metallization pattern for large area solar cells are presented. Chemical and physical deposition processes for metallization are described and compared. An economic evaluation of the 6 principal metallization options is presented. Instructions for preparing Format A cost data for solar cell manufacturing processes from UPPC forms for input into the SAMIC computer program are presented.

Mining protein phosphorylation information from biomedical literature using NLP parsing and Support Vector Machines.

PubMed

Raja, Kalpana; Natarajan, Jeyakumar

2018-07-01

Extraction of protein phosphorylation information from biomedical literature has gained much attention because of the importance in numerous biological processes. In this study, we propose a text mining methodology which consists of two phases, NLP parsing and SVM classification to extract phosphorylation information from literature. First, using NLP parsing we divide the data into three base-forms depending on the biomedical entities related to phosphorylation and further classify into ten sub-forms based on their distribution with phosphorylation keyword. Next, we extract the phosphorylation entity singles/pairs/triplets and apply SVM to classify the extracted singles/pairs/triplets using a set of features applicable to each sub-form. The performance of our methodology was evaluated on three corpora namely PLC, iProLink and hPP corpus. We obtained promising results of >85% F-score on ten sub-forms of training datasets on cross validation test. Our system achieved overall F-score of 93.0% on iProLink and 96.3% on hPP corpus test datasets. Furthermore, our proposed system achieved best performance on cross corpus evaluation and outperformed the existing system with recall of 90.1%. The performance analysis of our unique system on three corpora reveals that it extracts protein phosphorylation information efficiently in both non-organism specific general datasets such as PLC and iProLink, and human specific dataset such as hPP corpus. Copyright © 2018 Elsevier B.V. All rights reserved.

Performance evaluation of traffic sensing and control devices : [technical summary].

DOT National Transportation Integrated Search

2011-01-01

High quality sensing and control systems are essential for providing efficient signalized arterial operations. INDOT operates over 2600 traffic signal controllers, approximately 2000 of which use some form of vehicle detection. The private sector con...

FIRST AUTHOR

EPA Science Inventory

Endospores of aerobic spore-forming bacteria have been shown to be useful microbial surrogates for evaluating water treatment plant performance. A method was developed for analyzing for this microbial surrogate. Results will be presented from a survey of various water sources, al...

Scoring Package

National Institute of Standards and Technology Data Gateway

NIST Scoring Package (PC database for purchase)   The NIST Scoring Package (Special Database 1) is a reference implementation of the draft Standard Method for Evaluating the Performance of Systems Intended to Recognize Hand-printed Characters from Image Data Scanned from Forms.

Waste gasification vs. conventional Waste-to-Energy: a comparative evaluation of two commercial technologies.

PubMed

Consonni, Stefano; Viganò, Federico

2012-04-01

A number of waste gasification technologies are currently proposed as an alternative to conventional Waste-to-Energy (WtE) plants. Assessing their potential is made difficult by the scarce operating experience and the fragmentary data available. After defining a conceptual framework to classify and assess waste gasification technologies, this paper compares two of the proposed technologies with conventional WtE plants. Performances are evaluated by proprietary software developed at Politecnico di Milano and compared on the basis of a coherent set of assumptions. Since the two gasification technologies are configured as "two-step oxidation" processes, their energy performances are very similar to those of conventional plants. The potential benefits that may justify their adoption relate to material recovery and operation/emission control: recovery of metals in non-oxidized form; collection of ashes in inert, vitrified form; combustion control; lower generation of some pollutants. Copyright © 2012 Elsevier Ltd. All rights reserved.

75 FR 35117 - 60-Day Notice of Proposed Information Collection: Form DS-5504, Application for a U.S. Passport...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-21

... permit the Department to: Evaluate whether the proposed information collection is necessary for the proper performance of our functions. Evaluate the accuracy of our estimate of the burden of the proposed... descriptive information on the data page of the passport; or (c) the passport holder wishes to obtain a fully...

The Future of Principal Preparation and Principal Evaluation: Reflections of the Current Policy Context for School Leaders

ERIC Educational Resources Information Center

Williams, Sheneka M.

2015-01-01

As the federal role in education continuously evolves, accountability pressures for performance extend from classrooms to principals' offices. This newer form of accountability is changing the landscape of how school leaders are prepared, and ultimately, how they are evaluated. For some time, the onus of student achievement has been placed on…

Evaluation of the Self-Employment for Gecekondu Women Project, November 1995-June 1998. Working Papers in Early Childhood Development.

ERIC Educational Resources Information Center

Aksoy, Asu; Schilen, Sandra; Ulgen, Tulu

This paper stems from an evaluation of Turkey's first microcredit project aimed specifically at women, which was carried out with data derived through the Foundation for the Support of Women's Work (FFSW)'s Management Information System (which tracks credit users and repayment performance), application forms from women who applied for and received…

Evaluating Online Dictionaries From Faculty Prospective: A Case Study Performed On English Faculty Members At King Saud University--Wadi Aldawaser Branch

ERIC Educational Resources Information Center

Abouserie, Hossam Eldin Mohamed Refaat

2010-01-01

The purpose of this study was to evaluate online dictionaries from faculty prospective. The study tried to obtain in depth information about various forms of dictionaries the faculty used; degree of awareness and accessing online dictionaries; types of online dictionaries accessed; basic features of information provided; major benefits gained…

System design package for the solar heating and cooling central data processing system

NASA Technical Reports Server (NTRS)

1978-01-01

The central data processing system provides the resources required to assess the performance of solar heating and cooling systems installed at remote sites. These sites consist of residential, commercial, government, and educational types of buildings, and the solar heating and cooling systems can be hot-water, space heating, cooling, and combinations of these. The instrumentation data associated with these systems will vary according to the application and must be collected, processed, and presented in a form which supports continuity of performance evaluation across all applications. Overall software system requirements were established for use in the central integration facility which transforms raw data collected at remote sites into performance evaluation information for assessing the performance of solar heating and cooling systems.

The incidence of subclinical forms of urogenital tuberculosis in patients with pulmonary tuberculosis.

PubMed

Zachoval, Roman; Nencka, Petr; Vasakova, Martina; Kopecka, Emilie; Borovička, Vladimir; Wallenfels, Jiri; Cermak, Pavel

The aim of our study was to determine whether patients with pulmonary tuberculosis may have subclinical forms of urogenital tuberculosis. Between 2011 and 2012, a prospective study was conducted. Basic demographic parameters were recorded and the following investigations were performed: direct bacilloscopy of sputum, evaluation of affected lung fields and presence of cavities on chest X-ray, Mantoux tuberculin skin test II, and interferon gamma release assay. Culture and molecular methods for Mycobacterium tuberculosis in urine were performed. In cases with a positive urine test, an ultrasound examination, computed tomography scan of the abdomen, and endoscopy of the urinary tract were performed. A total of 102 patients (75 men and 27 women) were included in the study, with a median age of 46.8 years. Subclinical forms of urogenital TB were detected in 7 patients; 5 by molecular methods, 1 by urine culture, and 1 with both methods The presence of subclinical forms of genitourinary TB was found in 4 patients without and 3 patients with findings on imaging methods corresponding to TB. A significant number of patients with pulmonary tuberculosis may simultaneously have subclinical forms of urogenital TB. Copyright © 2017 The Authors. Published by Elsevier Ltd.. All rights reserved.

A Classification Scheme for Smart Manufacturing Systems’ Performance Metrics

PubMed Central

Lee, Y. Tina; Kumaraguru, Senthilkumaran; Jain, Sanjay; Robinson, Stefanie; Helu, Moneer; Hatim, Qais Y.; Rachuri, Sudarsan; Dornfeld, David; Saldana, Christopher J.; Kumara, Soundar

2017-01-01

This paper proposes a classification scheme for performance metrics for smart manufacturing systems. The discussion focuses on three such metrics: agility, asset utilization, and sustainability. For each of these metrics, we discuss classification themes, which we then use to develop a generalized classification scheme. In addition to the themes, we discuss a conceptual model that may form the basis for the information necessary for performance evaluations. Finally, we present future challenges in developing robust, performance-measurement systems for real-time, data-intensive enterprises. PMID:28785744

Minority Performance on the Naglieri Nonverbal Ability Test, Second Edition, versus the Cognitive Abilities Test, Form 6: One Gifted Program's Experience

ERIC Educational Resources Information Center

Giessman, Jacob A.; Gambrell, James L.; Stebbins, Molly S.

2013-01-01

The Naglieri Nonverbal Ability Test, Second Edition (NNAT2), is used widely to screen students for possible inclusion in talent development programs. The NNAT2 claims to provide a more culturally neutral evaluation of general ability than tests such as Form 6 of the Cognitive Abilities Test (CogAT6), which has Verbal and Quantitative batteries in…

Price vs. Performance: The Value of Next Generation Fighter Aircraft

DTIC Science & Technology

2007-03-01

forms. Both the semi-log and log-log forms were plagued with heteroskedasticity (according to the Breusch - Pagan /Cook-Weisberg test ). The RDT&E models...from 1949-present were used to construct two models – one based on procurement costs and one based on research, design, test , and evaluation (RDT&E...fighter aircraft hedonic models include several different categories of variables. Aircraft procurement costs and research, design, test , and

Evaluation of computing systems using functionals of a Stochastic process

NASA Technical Reports Server (NTRS)

Meyer, J. F.; Wu, L. T.

1980-01-01

An intermediate model was used to represent the probabilistic nature of a total system at a level which is higher than the base model and thus closer to the performance variable. A class of intermediate models, which are generally referred to as functionals of a Markov process, were considered. A closed form solution of performability for the case where performance is identified with the minimum value of a functional was developed.

Task-oriented display design - Concept and example

NASA Technical Reports Server (NTRS)

Abbott, Terence S.

1989-01-01

The general topic was in the area of display design alternatives for improved man-machine performance. The intent was to define and assess a display design concept oriented toward providing this task-oriented information. The major focus of this concept deals with the processing of data into parameters that are more relevant to the task of the human operator. Closely coupled to this concept of relevant information is the form or manner in which this information is actually presented. Conventional forms of presentation are normally a direct representation of the underlying data. By providing information in a form that is more easily assimilated and understood, a reduction in human error and cognitive workload may be obtained. A description of this proposed concept with a design example is provided. The application for the example was an engine display for a generic, twin-engine civil transport aircraft. The product of this concept was evaluated against a functionally similar, traditional display. The results of this evaluation showed that a task-oriented approach to design is a viable concept with regard to reducing user error and cognitive workload. The goal of this design process, providing task-oriented information to the user, both in content and form, appears to be a feasible mechanism for increasing the overall performance of a man-machine system.

Task-oriented display design: Concept and example

NASA Technical Reports Server (NTRS)

Abbott, Terence S.

1989-01-01

The general topic was in the area of display design alternatives for improved man-machine performance. The intent was to define and assess a display design concept oriented toward providing this task-oriented information. The major focus of this concept deals with the processing of data into parameters that are more relevant to the task of the human operator. Closely coupled to this concept of relevant information is the form or manner in which this information is actually presented. Conventional forms of presentation are normally a direct representation of the underlying data. By providing information in a form that is more easily assimilated and understood, a reduction in human error and cognitive workload may be obtained. A description of this proposed concept with a design example is provided. The application for the example was an engine display for a generic, twin-engine civil transport aircraft. The product of this concept was evaluated against a functionally similar, traditional display. The results of this evaluation showed that a task-oriented approach to design is a viable concept with regard to reducing user error and cognitive workload. The goal of this design process, providing task-oriented information to the user, both in content and form, appears to be a feasible mechanism for increasing the overall performance of a man-machine system.

Importance of Applying Condiments in a Commonly Consumed Food System for Understanding the Association Between Familiarity and Sensory Drivers of Liking: A Study Focused on Doenjang.

PubMed

Roh, Soo Hyun; Lee, Soh Min; Kim, Sang Sook; Kim, Kwang-Ok

2018-02-01

Doenjang, a Korean traditional fermented soybean paste, is one of the most essential condiments in Korean cuisine. Condiments are rarely consumed as it is, and are generally applied to other foods. The objective of this study was to understand how sensory drivers of liking of Doenjang would be affected according to food forms in which it is evaluated: the original paste form compared with a normally consumed soup form, and to understand the association of familiarity of evaluated food form. Descriptive analysis and consumer acceptability test was performed in 2 consumption forms: the original paste form and the Doenjang soup from. For consumer liking test, elderly consumers who have more experience to traditional Deonjang were compared to the young in their response to Doenjang paste and soup. The descriptive analysis results showed that the characteristic sensory features of the Deonjang samples were little affected based on the food system in which it was evaluated. However, when the paste was applied in soup, the intensities of the characteristic sensory features were reduced. Acceptability and familiarity of traditional type Doenjang samples for the young and for the elderly consumers were very similar in paste, but it differed when the samples were evaluated in soup. Thus, expectation difference between the young and the elderly was better revealed in soup, a more common food form consumed in practice. The results of this study indicate the importance of understanding sensory drivers of liking for a condiment such as Doenjang in their commonly consumed forms. Compared to the original condiment form, expectation difference between the young and the elderly were better revealed in Deonjang soup, a food form normally consumed in practice. Thus, the results of this study reinforced the importance of investigating sensory drivers of liking for a condiment in a food form that is normally consumed in practice for accurate understanding on consumer preference. © 2018 Institute of Food Technologists®.

40 CFR Table 5 to Subpart Eeee of... - Requirements for Performance Tests and Design Evaluations

Code of Federal Regulations, 2010 CFR

2010-07-01

... 1 through 10 a. A performance test to determine the organic HAP (or, upon approval, TOC) control... appendix A of 40 CFR part 63 for measuring form-aldehyde (A) Total organic HAP (or, upon approval, TOC), or... total organic HAP (or, upon approval, TOC) emissions are reduced by the required weight-percent or, as...

Evaluation of the Performance Driven Budget Initiative of the New York City Board of Education. First Annual Report.

ERIC Educational Resources Information Center

Siegel, Dorothy; Naphtali, Zvia Segal; Fruchter, Norm; Berne, Robert

In 1996 the Chancellor introduced Performance Driven Budgeting (PDB) to the New York City schools. PDB is a form of decentralized budgetary decision making intended to provide local educators with increased control and flexibility over the use of resources. The plan established a framework of goals and principles, outlined a phased-in…

Integrated Analysis of Flow, Form, and Function for River Management and Design Testing

NASA Astrophysics Data System (ADS)

Lane, B. A. A.; Pasternack, G. B.; Sandoval Solis, S.

2017-12-01

Rivers are highly complex, dynamic systems that support numerous ecosystem functions including transporting sediment, modulating biogeochemical processes, and regulating habitat availability for native species. The extent and timing of these functions is largely controlled by the interplay of hydrologic dynamics (i.e. flow) and the shape and composition of the river corridor (i.e. form). This study applies synthetic channel design to the evaluation of river flow-form-function linkages, with the aim of evaluating these interactions across a range of flows and forms to inform process-driven management efforts with limited data and financial requirements. In an application to California's Mediterranean-montane streams, the interacting roles of channel form, water year type, and hydrologic impairment were evaluated across a suite of ecosystem functions related to hydrogeomorphic processes, aquatic habitat, and riparian habitat. Channel form acted as the dominant control on hydrogeomorphic processes considered, while water year type controlled salmonid habitat functions. Streamflow alteration for hydropower increased redd dewatering risk and altered aquatic habitat availability and riparian recruitment dynamics. Study results highlight critical tradeoffs in ecosystem function performance and emphasize the significance of spatiotemporal diversity of flow and form at multiple scales for maintaining river ecosystem integrity. The approach is broadly applicable and extensible to other systems and ecosystem functions, where findings can be used to characterize complex controls on river ecosystems, assess impacts of proposed flow and form alterations, and inform river restoration strategies.

A structure-exploiting numbering algorithm for finite elements on extruded meshes, and its performance evaluation in Firedrake

NASA Astrophysics Data System (ADS)

Bercea, Gheorghe-Teodor; McRae, Andrew T. T.; Ham, David A.; Mitchell, Lawrence; Rathgeber, Florian; Nardi, Luigi; Luporini, Fabio; Kelly, Paul H. J.

2016-10-01

We present a generic algorithm for numbering and then efficiently iterating over the data values attached to an extruded mesh. An extruded mesh is formed by replicating an existing mesh, assumed to be unstructured, to form layers of prismatic cells. Applications of extruded meshes include, but are not limited to, the representation of three-dimensional high aspect ratio domains employed by geophysical finite element simulations. These meshes are structured in the extruded direction. The algorithm presented here exploits this structure to avoid the performance penalty traditionally associated with unstructured meshes. We evaluate the implementation of this algorithm in the Firedrake finite element system on a range of low compute intensity operations which constitute worst cases for data layout performance exploration. The experiments show that having structure along the extruded direction enables the cost of the indirect data accesses to be amortized after 10-20 layers as long as the underlying mesh is well ordered. We characterize the resulting spatial and temporal reuse in a representative set of both continuous-Galerkin and discontinuous-Galerkin discretizations. On meshes with realistic numbers of layers the performance achieved is between 70 and 90 % of a theoretical hardware-specific limit.

Achieving Fairness in Data Fusion Performance Evaluation Development

DTIC Science & Technology

2006-04-30

display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THE ABOVE ADDRESS. 1. REPORT DATE (DD-MM-YYYY) 2.REPORT TYPE 13. DATES...for and evaluation (T&E) organization is how to affordably achieve fairness in the application of its PE systems. Our PE framework provides a ...as a fusion system design balances probability of mission success with complexity/cost). The key issue for and evaluation (T&E) organization is how to

A Computer-Based Instructional Support Network: Design, Development, and Evaluation

DTIC Science & Technology

1990-09-01

mail systems, the ISN would be relatively easy to learn and use. Survey Related Projects A literature review was conducted using the Manpower and... the impact of the ISN upon student attrition, performance, and attitudes . The context of the evaluation was a sequence of NPS Continuing Education (CE...waiLed for the subject to complete the task alone. Process Measures The following forms of process data ( relating to evaluation objectives I and 2) were

Elections: DOD Can Strengthen Evaluation of Its Absentee Voting Assistance Program

DTIC Science & Technology

2010-06-01

Evaluation of Its Absentee Voting Assistance Program June 2010 GAO-10-476 Report Documentation Page Form ApprovedOMB No. 0704-0188 Public...4. TITLE AND SUBTITLE Elections: DOD Can Strengthen Evaluation of Its Absentee Voting Assistance Program 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c...PROGRAM ELEMENT NUMBER 6. AUTHOR(S) 5d. PROJECT NUMBER 5e. TASK NUMBER 5f. WORK UNIT NUMBER 7. PERFORMING ORGANIZATION NAME(S) AND ADDRESS(ES

Evaluation of Tack Coat Bond Strength Tests

DOT National Transportation Integrated Search

2018-05-01

Poor bonding between asphalt pavement overlays and the substrate pavement layer can greatly influence the long term performance of hot mix asphalt (HMA) in the form of premature cracking and fatigue. The primary method to achieve bonding between laye...

75 FR 14164 - Agency Forms Undergoing Paperwork Reduction Act Review

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-24

... Project Model Performance Evaluation Program for Mycobacterium tuberculosis and Non-tuberculous... support both domestic and global public health objectives for treatment of tuberculosis (TB), prevention... Program for Mycobacterium tuberculosis and Non-tuberculous Mycobacterium Drug Susceptibility Testing. This...

APNEA/WIT system nondestructive assay capability evaluation plan for select accessibly stored INEL RWMC waste forms

DOE Office of Scientific and Technical Information (OSTI.GOV)

Becker, G.K.

1997-01-01

Bio-Imaging Research Inc. (BIR) and Lockheed Martin Speciality Components (LMSC) are engaged in a Program Research and Development Agreement and a Rapid Commercialization Initiative with the Department of Energy, EM-50. The agreement required BIR and LMSC to develop a data interpretation method that merges nondestructive assay and nondestructive examination (NDA/NDE) data and information sufficient to establish compliance with applicable National TRU Program (Program) waste characterization requirements and associated quality assurance performance criteria. This effort required an objective demonstration of the BIR and LMSC waste characterization systems in their standalone and integrated configurations. The goal of the test plan is tomore » provide a mechanism from which evidence can be derived to substantiate nondestructive assay capability and utility statement for the BIT and LMSC systems. The plan must provide for the acquisition, compilation, and reporting of performance data thereby allowing external independent agencies a basis for an objective evaluation of the standalone BIR and LMSC measurement systems, WIT and APNEA respectively, as well as an expected performance resulting from appropriate integration of the two systems. The evaluation is to be structured such that a statement regarding select INEL RWMC waste forms can be made in terms of compliance with applicable Program requirements and criteria.« less

Evaluating Mobile Graphics Processing Units (GPUs) for Real-Time Resource Constrained Applications

DOE Office of Scientific and Technical Information (OSTI.GOV)

Meredith, J; Conger, J; Liu, Y

2005-11-11

Modern graphics processing units (GPUs) can provide tremendous performance boosts for some applications beyond what a single CPU can accomplish, and their performance is growing at a rate faster than CPUs as well. Mobile GPUs available for laptops have the small form factor and low power requirements suitable for use in embedded processing. We evaluated several desktop and mobile GPUs and CPUs on traditional and non-traditional graphics tasks, as well as on the most time consuming pieces of a full hyperspectral imaging application. Accuracy remained high despite small differences in arithmetic operations like rounding. Performance improvements are summarized here relativemore » to a desktop Pentium 4 CPU.« less

Hexavalent Chrome Free Coatings for Electronics; Electromagnetic Interference (EMI) Shielding Effectiveness (SE)

NASA Technical Reports Server (NTRS)

Kessel, Kurt R.

2014-01-01

The purpose of this testing is to determine the suitability of trivalent chromium conversion coatings that meet the requirements of MIL-DTL-5541, Type II, for use in applications where high-frequency electrical performance is important. This project will evaluate the ability of coated aluminum to form adequate EMI seals. Testing will assess performance of the trivalent chromium coatings against the known control hexavalent chromium MIL-DTL-5541 Type I Class 3 before and after they have been exposed to a set of environmental conditions. Performance will be assessed by evaluating shielding effectiveness (SE) test data from a variety of test samples comprised of different aluminum types and/or conversion coatings.

An audit of request forms submitted in a multidisciplinary diagnostic center in Lagos.

PubMed

Oyedeji, Olufemi Abiola; Ogbenna, Abiola Ann; Iwuala, Sandra Omozehio

2015-01-01

Request forms are important means of communication between physicians and diagnostic service providers. Pre-analytical errors account for over two thirds of errors encountered in diagnostic service provision. The importance of adequate completion of request forms is usually underestimated by physicians which may result in medical errors or delay in instituting appropriate treatment. The aim of this study was to audit the level of completion of request forms presented at a multidisciplinary diagnostic center. A review of all requests forms for investigations which included radiologic, laboratory and cardiac investigations received between July and December 2011 was performed to assess their level of completeness. The data was entered into a spreadsheet and analyzed. Only 1.3% of the 7,841 request forms reviewed were fully completed. Patient's names, the referring physician's name and gender were the most completed information on the forms evaluated with 99.0%, 99.0% and 90.3% completion respectively. Patient's age was provided in 68.0%, request date in 88.2%, and clinical notes/ diagnosis in 65.9% of the requests. Patient's full address was provided in only 5.6% of requests evaluated. This study shows that investigation request forms are inadequately filled by physicians in our environment. Continuous medical education of physicians on the need for adequate completion of request forms is needed.

Evaluation of virtual reality bronchoscopy as a learning and assessment tool.

PubMed

Moorthy, K; Smith, S; Brown, T; Bann, S; Darzi, A

2003-01-01

Conventional training in bronchoscopy involves a trainee performing on a real patient under supervision. This method of training is not only expensive, but there is also potential for increased patient discomfort. Simulators permit the acquisition of necessary technical skills required for the procedure. Virtual reality (VR) has been an integral part of training in aviation, and the application of this technology in medical training needs to be evaluated. This study was conducted to evaluate the efficacy of a VR bronchoscopy simulator as a learning and assessment tool. The bronchoscopic simulator (HT Medical Systems, Maryland, USA) is a VR computer programme. The simulator has the ability to assess competence by a set of parameters, which formed the data for the study. Nine novices without previous bronchoscopic experience formed the study group (group 1). Nine experienced bronchoscopists having performed between 200 and 1000 bronchoscopies formed the other group (group 2). We assessed the efficacy of the system as a learning tool by studying whether there was a significant difference between the first and subsequent sessions of the subjects from group 1 and by comparing the performance of the two groups. Statistical analysis was done using the Mann-Whitney U test and the Wilcoxon signed ranks test. There was a significant difference in performance between the first attempt of group 1 and the performance of the experts in terms of percentage of segments visualised and number of wall collisions and the economy of performance. Among the subjects from group 1, there was a significant improvement in percentage of segments visualised by the third attempt (p = 0.04), in the economy of performance by the sixth attempt (0.008) and in the number of wall collisions by the sixth attempt (0.024). When each attempt of the novices was compared with the performance of group 2, the significance in the difference of the percentage of segments studied (p = 0.09) and the economy of performance disappeared by the third attempt (0.06), while the difference in the number of wall collisions disappeared by the fifth attempt (p = 0.06). This study has been able to establish the face, construct and content validity of the simulator and the potential for it to be an effective training tool. Copyright 2003 S. Karger AG, Basel

Cooperative learning as applied to resident instruction in radiology reporting.

PubMed

Mueller, Donald; Georges, Alexandra; Vaslow, Dale

2007-12-01

The study is designed to evaluate the effectiveness of an active form of resident instruction, cooperative learning, and the residents' response to that form of instruction. The residents dictated three sets of reports both before and after instruction in radiology reporting using the cooperative learning method. The reports were evaluated for word count, Flesch-Kincaid grade level, advancement on clinical spectrum, clarity, and comparison to prior reports. The reports were evaluated for changes in performance characteristics between the pre- and postinstruction dictations. The residents' response to this form of instruction was evaluated by means of a questionnaire. The instruction was effective in changing the resident dictations. The results became shorter (P<.035), more complex (P<.0126), and demonstrated increased advancement on clinical spectrum (P<.0204). The resident response to this form of instruction was positive. One hundred percent or respondents indicated enjoyment working with their groups. Seventy-five percent stated they would like to participate in more cooperative learning activities. The least positive responses related to the amount of time devoted to the project. Sixty-three percent of respondents stated that the time devoted to the project was appropriate. Cooperative learning can be an effective tool in the setting of the radiology residency. Instructional time requirements must be strongly considered in designing a cooperative learning program.

Energy saving by using asymmetric aftbodies for merchant ships-design methodology, numerical simulation and validation

NASA Astrophysics Data System (ADS)

Dang, Jie; Chen, Hao

2016-12-01

The methodology and procedures are discussed on designing merchant ships to achieve fully-integrated and optimized hull-propulsion systems by using asymmetric aftbodies. Computational fluid dynamics (CFD) has been used to evaluate the powering performance through massive calculations with automatic deformation algorisms for the hull forms and the propeller blades. Comparative model tests of the designs to the optimized symmetric hull forms have been carried out to verify the efficiency gain. More than 6% improvement on the propulsive efficiency of an oil tanker has been measured during the model tests. Dedicated sea-trials show good agreement with the predicted performance from the test results.

Integrating Flow, Form, and Function for Improved Environmental Water Management

NASA Astrophysics Data System (ADS)

Albin Lane, Belize Arela

Rivers are complex, dynamic natural systems. The performance of river ecosystem functions, such as habitat availability and sediment transport, depends on the interplay of hydrologic dynamics (flow) and geomorphic settings (form). However, most river restoration studies evaluate the role of either flow or form without regard for their dynamic interactions. Despite substantial recent interest in quantifying environmental water requirements to support integrated water management efforts, the absence of quantitative, transferable relationships between river flow, form, and ecosystem functions remains a major limitation. This research proposes a novel, process-driven methodology for evaluating river flow-form-function linkages in support of basin-scale environmental water management. This methodology utilizes publically available geospatial and time-series data and targeted field data collection to improve basic understanding of river systems with limited data and resource requirements. First, a hydrologic classification system is developed to characterize natural hydrologic variability across a highly altered, physio-climatically diverse landscape. Next, a statistical analysis is used to characterize reach-scale geomorphic variability and to investigate the utility of topographic variability attributes (TVAs, subreach-scale undulations in channel width and depth), alongside traditional reach-averaged attributes, for distinguishing dominant geomorphic forms and processes across a hydroscape. Finally, the interacting roles of flow (hydrologic regime, water year type, and hydrologic impairment) and form (channel morphology) are quantitatively evaluated with respect to ecosystem functions related to hydrogeomorphic processes, aquatic habitat, and riparian habitat. Synthetic river corridor generation is used to evaluate and isolate the role of distinct geomorphic attributes without the need for intensive topographic surveying. This three-part methodology was successfully applied in the Sacramento Basin of California, USA, a large, heavily altered Mediterranean-montane basin. A spatially-explicit hydrologic classification of California distinguished eight natural hydrologic regimes representing distinct flow sources, hydrologic characteristics, and rainfall-runoff controls. A hydro-geomorphic sub-classification of the Sacramento Basin based on stratified random field surveys of 161 stream reaches distinguished nine channel types consisting of both previously identified and new channel types. Results indicate that TVAs provide a quantitative basis for interpreting non-uniform as well as uniform geomorphic processes to better distinguish linked channel forms and functions of ecological significance. Finally, evaluation of six ecosystem functions across alternative flow-form scenarios in the Yuba River watershed highlights critical tradeoffs in ecosystem performance and emphasizes the significance of spatiotemporal diversity of flow and form for maintaining ecosystem integrity. The methodology developed in this dissertation is broadly applicable and extensible to other river systems and ecosystem functions, where findings can be used to characterize complex controls on river ecosystems, assess impacts of proposed flow and form alterations, and inform river restoration strategies. Overall, this research improves scientific understanding of the linkages between hydrology, geomorphology, and river ecosystems to more efficiently allocate scare water resources for human and environmental objectives across natural and built landscapes.

Study of shape evaluation for mask and silicon using large field of view

NASA Astrophysics Data System (ADS)

Matsuoka, Ryoichi; Mito, Hiroaki; Shinoda, Shinichi; Toyoda, Yasutaka

2010-09-01

We have developed a highly integrated method of mask and silicon metrology. The aim of this integration is evaluating the performance of the silicon corresponding to Hotspot on a mask. It can use the mask shape of a large field, besides. The method adopts a metrology management system based on DBM (Design Based Metrology). This is the high accurate contouring created by an edge detection algorithm used in mask CD-SEM and silicon CD-SEM. Currently, as semiconductor manufacture moves towards even smaller feature size, this necessitates more aggressive optical proximity correction (OPC) to drive the super-resolution technology (RET). In other words, there is a trade-off between highly precise RET and mask manufacture, and this has a big impact on the semiconductor market that centers on the mask business. As an optimal solution to these issues, we provide a DFM solution that extracts 2-dimensional data for a more realistic and error-free simulation by reproducing accurately the contour of the actual mask, in addition to the simulation results from the mask data. On the other hand, there is roughness in the silicon form made from a mass-production line. Moreover, there is variation in the silicon form. For this reason, quantification of silicon form is important, in order to estimate the performance of a pattern. In order to quantify, the same form is equalized in two dimensions. And the method of evaluating based on the form is popular. In this study, we conducted experiments for averaging method of the pattern (Measurement Based Contouring) as two-dimensional mask and silicon evaluation technique. That is, observation of the identical position of a mask and a silicon was considered. The result proved its detection accuracy and reliability of variability on two-dimensional pattern (mask and silicon) and is adaptable to following fields of mask quality management. •Discrimination of nuisance defects for fine pattern. •Determination of two-dimensional variability of pattern. •Verification of the performance of the pattern of various kinds of Hotspots. In this report, we introduce the experimental results and the application. We expect that the mask measurement and the shape control on mask production will make a huge contribution to mask yield-enhancement and that the DFM solution for mask quality control process will become much more important technology than ever. It is very important to observe the form of the same location of Design, Mask, and Silicon in such a viewpoint. And we report it about algorithm of the image composition in Large Field.

Assessing the Dimensionality and Reliability of Teachers' Performance Evaluation in Eastern Zone High Schools, Tigrai National Regional State, Ethiopia

ERIC Educational Resources Information Center

Embiza, Samuel; Hadush, Selamawit

2015-01-01

The purpose of this study was to assess the dimensionality and reliability of Teachers Evaluation Questionnaire in Eastern Zone high school; Tigrai National Regional State which was filled by school principal. To this end: 9 high schools in 7 woredas were selected using the lottery method, in which 459 teachers' rate forms were collected. All…

The Effects of Evaluating Video Examples of Staffs' Own versus Others' Performance on Discrete-Trial Training Skills in a Human Service Setting

ERIC Educational Resources Information Center

Williams, W. Larry; Gallinat, Julianne

2011-01-01

Many studies have been conducted evaluating the use of feedback in staff training in organizational settings. Central to this literature has been the use of a variety of forms of feedback, including videotaped feedback. A distinction is outlined between video modeling and a variety of possible video feedback procedures. Previous studies have…

The feasibility of sharing simulation-based evaluation scenarios in anesthesiology.

PubMed

Berkenstadt, Haim; Kantor, Gareth S; Yusim, Yakov; Gafni, Naomi; Perel, Azriel; Ezri, Tiberiu; Ziv, Amitai

2005-10-01

We prospectively assessed the feasibility of international sharing of simulation-based evaluation tools despite differences in language, education, and anesthesia practice, in an Israeli study, using validated scenarios from a multi-institutional United States (US) study. Thirty-one Israeli junior anesthesia residents performed four simulation scenarios. Training sessions were videotaped and performance was assessed using two validated scoring systems (Long and Short Forms) by two independent raters. Subjects scored from 37 to 95 (70 +/- 12) of 108 possible points with the "Long Form" and "Short Form" scores ranging from 18 to 35 (28.2 +/- 4.5) of 40 possible points. Scores >70% of the maximal score were achieved by 61% of participants in comparison to only 5% in the original US study. The scenarios were rated as very realistic by 80% of the participants (grade 4 on a 1-4 scale). Reliability of the original assessment tools was demonstrated by internal consistencies of 0.66 for the Long and 0.75 for the Short Form (Cronbach alpha statistic). Values in the original study were 0.72-0.76 for the Long and 0.71-0.75 for the Short Form. The reliability did not change when a revised Israeli version of the scoring was used. Interrater reliability measured by Pearson correlation was 0.91 for the Long and 0.96 for the Short Form (P < 0.01). The high scores for plausibility given to the scenarios and the similar reliability of the original assessment tool support the feasibility of using simulation-based evaluation tools, developed in the US, in Israel. The higher scores achieved by Israeli residents may be related to the fact that most Israeli residents are immigrants with previous training in anesthesia. Simulation-based assessment tools developed in a multi-institutional study in the United States can be used in Israel despite the differences in language, education, and medical system.

Path selection system simulation and evaluation for a Martian roving vehicle

NASA Technical Reports Server (NTRS)

Boheim, S. L.; Prudon, W. C.

1972-01-01

The simulation and evaluation of proposed path selection systems for an autonomous Martian roving vehicle was developed. The package incorporates a number of realistic features, such as the simulation of random effects due to vehicle bounce and sensor-reading uncertainty, to increase the reliability of the results. Qualitative and quantitative evaluation criteria were established. The performance of three different path selection systems was evaluated to determine the effectiveness of the simulation package, and to form some preliminary conclusions regarding the tradeoffs involved in a path selection system design.

Foundations of Intervention Research in Instrumental Practice

PubMed Central

Hatfield, Johannes L.; Lemyre, Pierre-Nicolas

2016-01-01

The goals of the present study are to evaluate, implement, and adapt psychological skills used in the realm of sports into music performance. This research project also aims to build foundations on how to implement future interventions to guide music students on how to optimize practice toward performance. A 2-month psychological skills intervention was provided to two students from the national music academy's bachelor program in music performance to better understand how to adapt and construct psychological skills training programs for performing music students. The program evaluated multiple intervention tools including the use of questionnaires, performance profiling, iPads, electronic practice logs, recording the perceived value of individual and combined work, as well as the effectiveness of different communication forms. Perceived effects of the intervention were collected through semi-structured interviews, observations, and logs. PMID:26834660

Portfolio: a comprehensive method of assessment for postgraduates in oral and maxillofacial surgery.

PubMed

Kadagad, Poornima; Kotrashetti, S M

2013-03-01

Post graduate learning and assessment is an important responsibility of an academic oral and maxillofacial surgeon. The current method of assessment for post graduate training include formative evaluation in the form of seminars, case presentations, log books and infrequently conducted end of year theory exams. End of the course theory and practical examination is a summative evaluation which awards the degree to the student based on grades obtained. Oral and maxillofacial surgery is mainly a skill based specialty and deliberate practice enhances skill. But the traditional system of assessment of post graduates emphasizes their performance on the summative exam which fails to evaluate the integral picture of the student throughout the course. Emphasis on competency and holistic growth of the post graduate student during training in recent years has lead to research and evaluation of assessment methods to quantify students' progress during training. Portfolio method of assessment has been proposed as a potentially functional method for post graduate evaluation. It is defined as a collection of papers and other forms of evidence that learning has taken place. It allows the collation and integration of evidence on competence and performance from different sources to gain a comprehensive picture of everyday practice. The benefits of portfolio assessment in health professions education are twofold: it's potential to assess performance and its potential to assess outcomes, such as attitudes and professionalism that are difficult to assess using traditional instruments. This paper is an endeavor for the development of portfolio method of assessment for post graduate student in oral and maxillofacial surgery.

Indoor test for thermal performance evaluation of Libbey-Owens-Ford solar collector. [using a solar simulator

NASA Technical Reports Server (NTRS)

Shih, K.

1977-01-01

The thermal performance of a flat plate solar collector that uses liquid as the heat transfer medium was investigated under simulated conditions. The test conditions and thermal performance data obtained during the tests are presented in tabular form, as well as in graphs. Data obtained from a time constant test and incident angle modifier test, conducted to determine transient effect and the incident angle effect on the collector, are included.

Strategic Frameworks for Human Performance and Human Systems Integration: Spotlight on General Systems Performance Theory and Nonlinear Causal Resource Analysis

DTIC Science & Technology

2010-12-14

Robotics Research Institute Auditorium Riverbend Campus, Fort Worth, TX Report Documentation Page Form ApprovedOMB No. 0704-0188 Public reporting burden...for HP and HSI. Format Participants were presented with information on frameworks and the benefits they can have in support of the various roles... benefit from understanding human performance. She concluded with the objectives of the workshop: 1. Evaluate strategic frameworks for representing

Accelerated loading evaluation of subbase layers in pavement performance : tech summary.

DOT National Transportation Integrated Search

2009-04-01

The mighty Mississippi River formed and sculpted most of south Louisiana, creating large areas of alluvial : deposits consisting of soft, wet, and unconsolidated soil layers. Many Louisiana pavements were built in : these areas of naturally low shear...

NASA Johnson Space Center Biomedical Research Resources

NASA Technical Reports Server (NTRS)

Paloski, W. H.

1999-01-01

Johnson Space Center (JSC) medical sciences laboratories constitute a national resource for support of medical operations and life sciences research enabling a human presence in space. They play a critical role in evaluating, defining, and mitigation the untoward effect of human adaption to space flight. Over the years they have developed the unique facilities and expertise required to perform: biomedical sample analysis and physiological performance tests supporting medical evaluations of space flight crew members and scientific investigations of the operationally relevant medical, physiological, cellular, and biochemical issues associated with human space flight. A general overview of these laboratories is presented in viewgraph form.

Public domain optical character recognition

NASA Astrophysics Data System (ADS)

Garris, Michael D.; Blue, James L.; Candela, Gerald T.; Dimmick, Darrin L.; Geist, Jon C.; Grother, Patrick J.; Janet, Stanley A.; Wilson, Charles L.

1995-03-01

A public domain document processing system has been developed by the National Institute of Standards and Technology (NIST). The system is a standard reference form-based handprint recognition system for evaluating optical character recognition (OCR), and it is intended to provide a baseline of performance on an open application. The system's source code, training data, performance assessment tools, and type of forms processed are all publicly available. The system recognizes the handprint entered on handwriting sample forms like the ones distributed with NIST Special Database 1. From these forms, the system reads hand-printed numeric fields, upper and lowercase alphabetic fields, and unconstrained text paragraphs comprised of words from a limited-size dictionary. The modular design of the system makes it useful for component evaluation and comparison, training and testing set validation, and multiple system voting schemes. The system contains a number of significant contributions to OCR technology, including an optimized probabilistic neural network (PNN) classifier that operates a factor of 20 times faster than traditional software implementations of the algorithm. The source code for the recognition system is written in C and is organized into 11 libraries. In all, there are approximately 19,000 lines of code supporting more than 550 subroutines. Source code is provided for form registration, form removal, field isolation, field segmentation, character normalization, feature extraction, character classification, and dictionary-based postprocessing. The recognition system has been successfully compiled and tested on a host of UNIX workstations. This paper gives an overview of the recognition system's software architecture, including descriptions of the various system components along with timing and accuracy statistics.

Choice of excipients for gelly-like pulp prepared ex tempore "on a spoon"- "placebo" and with sartans.

PubMed

Wolska, Eliza; Kluk, Anna; Zarazińska, Magda; Boniecka, Magdalena; Sznitowska, Małgorzata

2016-01-01

To ensure safe oral administration, pediatric patients require an appropriate dosage form to be swallowed without relevant difficulties. Ex tempore hydrated powders, forming viscous pulp "on a spoon", have recently gained much interest as pediatric formulations. The aim of this study was to evaluate the viscosity-increasing substances and disintegrants, alone or in mixtures, as excipients suitable for preparing such formulations, with candesartan and valsartan chosen as model active substances. The mixtures of excipients were prepared in the form of powders, granules or lyophilizates, which were evaluated in terms of their ability to form a homogenous mass after hydration with a small amount of water. The best compositions were tested with candesartan cilexetil and valsartan (2% and 10% w/w, respectively). Performed studies include macroscopic, organoleptic and microscopic observations, as well as a textural analysis, determination of gelation time and rheological measurements. Mixtures of guar gum, lactose and one of the disintegrants (F-Melt M, Prosolv 50, Prosolv Easy, Lycatab, Pharmaburst, Pearlitol) demonstrated the best properties. With regard to drug-incorporating formulations, granules were evaluated as the most satisfying form, while the functional properties of lyophilized formulations were poor. Granules with candesartan cilexetil (2%) were found to be the most promising for further development.

[Selection of occlusal scheme on masticatory function in denture wearers].

PubMed

Koide, Kaoru

2004-12-01

The characteristics of full balanced occlusion (FBO) and lingualized occlusion (LO), which are occlusions that make up removable dentures, were investigated from the standpoint of masticatory function, and an attempt was made to clarify criteria for selecting and configuring occlusions to suit individual cases. Since there have been few studies that have quantitatively compared FBO and LO from the aspect of masticatory function, we decided to organize and present the characteristics of both in this paper based on our findings from studies carried out in our department. We found that LO offered a higher ability of food crushing, showed higher masticatory performance in the case of hard foods, displayed faster as well as smoother masticatory movement, and showed chewing patterns that were closer to the chopper type compared with FBO. Moreover, subjective evaluation by subjects indicated that "it was easier to eat and the food tasted better" with the LO compared with the FBO in the case of general foods. Furthermore, a comparison of anatomical form and bladed form of upper lingual cusps in the case of LO showed no difference between the anatomical form and the bladed form in terms of masticatory performance in the case of any of the test foods, but the bladed form offered a higher ability of food crushing, displayed faster and smoother masticatory movement, and showed chewing patterns that were closer to the chopper type. In addition, subjective evaluation by subjects showed that it was easier for them to eat raw carrots and pickled radish, which are hard foods generally thought to be difficult to eat with dentures, with the bladed form compared with the anatomical form.

Effects of Overstocking at the Feedbunk on the Growth Performance and Sorting Characteristics of a Forage-based Diet Offered for Ad-libitum Intake to Replacement Holstein Dairy Heifers

USDA-ARS?s Scientific Manuscript database

Various forms of overcrowding are common in heifer-rearing operations. Our objectives for this study were to evaluate the effects of overstocking at the feedbunk (100, 133, 160, or 200% of capacity) on the growth performance, feedbunk-sorting behaviors, and hygiene of 128 gravid Holstein heifers (47...

DIFFERENTIAL ANALYZER

DOEpatents

Sorensen, E.G.; Gordon, C.M.

1959-02-10

Improvements in analog eomputing machines of the class capable of evaluating differential equations, commonly termed differential analyzers, are described. In general form, the analyzer embodies a plurality of basic computer mechanisms for performing integration, multiplication, and addition, and means for directing the result of any one operation to another computer mechanism performing a further operation. In the device, numerical quantities are represented by the rotation of shafts, or the electrical equivalent of shafts.

Measuring the development of insight by dental health professionals in training using workplace-based assessment.

PubMed

Prescott-Clements, L E; van der Vleuten, C P M; Schuwirth, L; Gibb, E; Hurst, Y; Rennie, J S

2011-08-01

For health professionals, the development of insight into their performance is vital for safe practice, professional development and self-regulation. This study investigates whether the development of dental trainees' insight, when provided with external feedback on performance, can be assessed using a single criterion on a simple global ratings form such as the Longitudinal Evaluation of Performance or Mini Clinical Evaluation Exercise. Postgraduate dental trainees (N = 139) were assessed using this tool on a weekly basis for 6 months. Regression analysis of the data was carried out using SPSS, and a short trainer questionnaire was implemented to investigate feasibility. Ratings for insight were shown to increase with time in a similar manner to the growth observed in other essential skills. The gradient of the slope for growth of insight was slightly less than that of the other observed skills. Trainers were mostly positive about the new criterion assessing trainees' insight, although the importance of training for trainers in this process was highlighted. Our data suggest that practitioners' insight into their performance can be developed with experience and regular feedback. However, this is most likely a complex skill dependent on a number of intrinsic and external factors. The development of trainees' insight into their performance can be assessed using a single criterion on a simple global ratings form. The process involves no additional burden on evaluators in terms of their time or cost, and promotes best practice in the provision of feedback for trainees. © 2011 John Wiley & Sons A/S.

Effect of insulin therapy and dietary adjustments on safety and performance during simulated soccer tests in people with type 1 diabetes: study protocol for a randomized controlled trial.

PubMed

Calvo-Marín, Javier; Torrealba-Acosta, Gabriel; Campbell, Matthew; Gaboury, Jesse; Ali, Ajmol; Chen-Ku, Chih Hao

2017-07-20

Despite the reduction in glycemic derangement in patients with type 1 diabetes mellitus (T1D) through dietary and therapeutic adjustments implemented before, during and after continuous exercise, evidence for its effectiveness with intermittent forms of exercise, such as soccer, is still lacking. We designed a study protocol for a randomized, crossover, double-blinded, controlled trial, for the evaluation of the effect that a strategy of dietary and therapeutic modifications may have on safety and performance of persons with T1D in soccer training sessions and cognitive testing. Inclusion criteria comprise: age older than 18 years, more than 2 years since T1D diagnosis, low C-peptide level, a stable insulin regimen, HbA1c less than 9.0% and regular participation in soccer activities. Our primary outcome evaluates safety regarding hypoglycemia events in patients using dietary and therapeutic adjustments, compared with the performance under the implementation of current American Diabetes Association (ADA) usual recommendations for nutritional and pharmacological adjustments for exercise. Additionally, we will evaluate as secondary outcomes: soccer performance, indexed by performance in well-established soccer skill tests, cognitive functions (indexed by Stroop, digital vigilance test (DVT), Corsi block-tapping task (CBP), and rapid visual information processing (RVIP) tests), and glycemic control measured with a continuous glucose monitor (CGM). Dietary and insulin adjustments standardized under a 4-step method strategy have never been tested in a clinical trial setting with intermittent forms of exercise, such as soccer. We hypothesize that through this strategy we will observe better performance by persons with T1D in soccer and cognitive evaluations, and more stable control of glycemic parameters before, during and after exercise execution, indexed by CGM measurements. ISRCTN, ISRCTN17447843. Registered on 5 January 2017.

DSN human factors project

NASA Technical Reports Server (NTRS)

Chafin, R. L.; Martin, T. H.

1980-01-01

The project plan was to hold focus groups to identify the factors influencing the ease of use characteristics of software and to bond the problem. A questionnaire survey was conducted to evaluate those factors which were more appropriately measured with that method. The performance oriented factors were analyzed and relationships hypothesized. The hypotheses were put to test in the experimental phase of the project. In summary, the initial analysis indicates that there is an initial performance effect favoring computer controlled dialogue but the advantage fades fast as operators become experienced. The user documentation style is seen to have a significant effect on performance. The menu and prompt command formats are preferred by inexperienced operators. The short form mnemonic is least favored. There is no clear best command format but the short form mnemonic is clearly the worst.

The influence of mixture preparation in the intake port on the performance of a spark-ignited four-stroke engine

NASA Astrophysics Data System (ADS)

Daniels, Charles Howard

An experimental technique is developed for evaluating the influence of mixture preparation in the intake port on the performance of a spark ignited engine. The preparation components studied are fuel vapor, droplets, and liquid streams. The fuel in these three distinct forms are produced and varied in a specially designed mixture preparation system, which delivers an air/fuel mixture to a test cylinder of an engine. Incorporated in the preparation system are devices for measuring the flow rates of fuel in these forms. A method of estimating the vapor concentration of a gasoline in the preparation channel by the use of simple temperature measurements is also presented. The effect of these fuel forms on in-cylinder pressure performance and exhaust gas concentrations are investigated in a 1.9 L Ford engine. A matrix of engine operations are studied along with two gasolines of different volatilities. The results of this investigation show that the operation of the engine at low speeds and low manifold absolute pressures is most susceptible to the effects mixture preparation. For those engine operating conditions affected, the results show that by increasing the amount of fuel in liquid stream form, the performance of the engine is generally diminished. In addition, 'equivalent' mixtures resulting from a conventional injector and a pneumatic atomizer in the intake port are identified relative to engine performance.

An assessment technique for computer-socket manufacturing

PubMed Central

Sanders, Joan; Severance, Michael

2015-01-01

An assessment strategy is presented for testing the quality of carving and forming of individual computer aided manufacturing facilities. The strategy is potentially useful to facilities making sockets and companies marketing manufacturing equipment. To execute the strategy, an evaluator fabricates a collection of test models and sockets using the manufacturing suite under evaluation, and then measures their shapes using scanning equipment. Overall socket quality is assessed by comparing socket shapes with electronic file shapes. Then model shapes are compared with electronic file shapes to characterize carving performance. Socket shapes are compared with model shapes to characterize forming performance. The mean radial error (MRE), which is the average difference in radii between the two shapes being compared, provides insight into sizing quality. Inter-quartile range (IQR), the range of radial error for the best matched half of the points on the surfaces being compared, provides insight into shape quality. By determining MRE and IQR for carving and forming separately, the source(s) of socket shape error may be pinpointed. The developed strategy may provide a useful tool to the prosthetics community and industry to help identify problems and limitations in computer aided manufacturing and insight into appropriate modifications to overcome them. PMID:21938663

Updated Liquid Secondary Waste Grout Formulation and Preliminary Waste Form Qualification

DOE Office of Scientific and Technical Information (OSTI.GOV)

Saslow, Sarah A.; Um, Wooyong; Russell, Renee L.

This report describes the results from liquid secondary waste grout (LSWG) formulation and cementitious waste form qualification tests performed by Pacific Northwest National Laboratory (PNNL) for Washington River Protection Solutions, LLC (WRPS). New formulations for preparing a cementitious waste form from a high-sulfate liquid secondary waste stream simulant, developed for Effluent Management Facility (EMF) process condensates merged with low activity waste (LAW) caustic scrubber, and the release of key constituents (e.g. 99Tc and 129I) from these monoliths were evaluated. This work supports a technology development program to address the technology needs for Hanford Site Effluent Treatment Facility (ETF) liquid secondarymore » waste (LSW) solidification and supports future Direct Feed Low-Activity Waste (DFLAW) operations. High-priority activities included simulant development, LSWG formulation, and waste form qualification. The work contained within this report relates to waste form development and testing and does not directly support the 2017 integrated disposal facility (IDF) performance assessment (PA). However, this work contains valuable information for use in PA maintenance past FY17, and for future waste form development efforts. The provided data should be used by (i) cementitious waste form scientists to further understanding of cementitious dissolution behavior, (ii) IDF PA modelers who use quantified constituent leachability, effective diffusivity, and partitioning coefficients to advance PA modeling efforts, and (iii) the U.S. Department of Energy (DOE) contractors and decision makers as they assess the IDF PA program. The results obtained help fill existing data gaps, support final selection of a LSWG waste form, and improve the technical defensibility of long-term waste form performance estimates.« less

Current and Future Uses of Aluminum in the Automotive Industry

NASA Astrophysics Data System (ADS)

Long, R. S.; Boettcher, E.; Crawford, D.

2017-12-01

Aluminum use is growing in automotive closures and body in white applications to improve vehicle performance and fuel economy. The auto industry is looking for higher-strength aluminum materials needed for strength-driven safety-critical parts. Through cooperation with industrial partners and support from the Department of Energy (DOE), multiple experimental 7xxx alloys were developed for automotive applications. The objective is to enable complex shapes to be formed at temperatures below 225°C. A demonstration part has been developed that is representative of the forming challenges within a current hot-stamped door ring component. This part tooling has been built and installed into a press line which includes blank heating and robotic transfer. Forming trials of these alloys are currently underway and the formability, strength and corrosion performance of these materials are being evaluated.

Current and Future Uses of Aluminum in the Automotive Industry

DOE PAGES

Long, R. S.; Boettcher, E.; Crawford, D.

2017-08-29

Aluminum use is growing in automotive closures and body in white applications to improve vehicle performance and fuel economy. The auto industry is looking for higher strength aluminum materials needed for strength driven safety critical parts. Through cooperation with industrial partners and support from the Department of Energy (DOE), multiple experimental 7xxx alloys were developed for automotive applications. The objective is to enable complex shapes to be formed at temperatures below 225° C. A demonstration part has been developed that is representative of the forming challenges within a current hot stamped door ring component. This part tooling has been builtmore » and installed into a press line which includes blank heating and robotic transfer. Forming trials of these alloys are currently underway and the formability, strength and corrosion performance of these materials are being evaluated.« less

Current and Future Uses of Aluminum in the Automotive Industry

DOE Office of Scientific and Technical Information (OSTI.GOV)

Long, R. S.; Boettcher, E.; Crawford, D.

Aluminum use is growing in automotive closures and body in white applications to improve vehicle performance and fuel economy. The auto industry is looking for higher strength aluminum materials needed for strength driven safety critical parts. Through cooperation with industrial partners and support from the Department of Energy (DOE), multiple experimental 7xxx alloys were developed for automotive applications. The objective is to enable complex shapes to be formed at temperatures below 225° C. A demonstration part has been developed that is representative of the forming challenges within a current hot stamped door ring component. This part tooling has been builtmore » and installed into a press line which includes blank heating and robotic transfer. Forming trials of these alloys are currently underway and the formability, strength and corrosion performance of these materials are being evaluated.« less

Simulated Donor Family Encounters at Organ Transplantation Coordinators In-Service Training Course: Process and Impact Evaluation.

PubMed

Karabilgin, Ö S; Altuğ, N; Çalışkan, S A; Bozoklar, C A; Durak, H I; Demiral Yılmaz, N

2015-06-01

This study introduced the modified version of the Organ Transplantation Coordinator course including simulated donor family encounters (SDFEs) and communication skills. It also evaluated participants' opinions and achievement levels, and how they implemented what they learned in the course in their work settings. The course used the modified Analysis, Design, Development, Implementation, and Evaluation model and was evaluated in 3 steps. The participants' views were obtained using the course overall evaluation form and communication skills evaluation form, their success was assessed with the posttest and SDFEs evaluation form, and the effects of what they learned during the course on their work settings were assessed through telephone interviews. At this step, the participants were asked to write letters about the targets they intended to achieve in their work settings. The letters were analyzed with the content analysis method, and a questionnaire consisting of 105 targets was developed. A year later the participants were telephoned and asked to what extent they achieved their targets. The participants' satisfaction from the whole course was high (x: 8.65 ± 1.06). In the communication skills evaluation form, the participants stated that they would mainly utilize their communication and empathy skills during donor family encounters. The participants' mean posttest score was high (x: 96.0 ± 3.8). During the SDFEs, 70% of the respondents' performance was considered sufficient. Telephone interviews conducted with the questionnaire revealed that 77.6% of the targets were fulfilled. It can be said that the course affected the participants in terms of implementing their knowledge and communication skills related to family encounters. Copyright © 2015 Elsevier Inc. All rights reserved.

Evaluation of superplastic forming and co-diffusion bonding of Ti-6Al-4V titanium alloy expanded sandwich structures

NASA Technical Reports Server (NTRS)

Arvin, G. H.; Israeli, L.; Stolpestad, J. H.; Stacher, G. W.

1981-01-01

The application of the superplastic forming/diffusion bonding (SPF/DB) process to supersonic cruise research is investigated. The capability of an SPF/DB titanium structure to meet the structural requirements of the inner wing area of the NASA arrow-wing advanced supersonic transport design is evaluated. Selection of structural concepts and their optimization for minimum weight, SPF/DB process optimization, fabrication of representative specimens, and specimen testing and evaluation are described. The structural area used includes both upper and lower wing panels, where the upper wing panel is used for static compression strength evaluation and the lower panel, in tension, is used for fracture mechanics evaluations. The individual test specimens, cut from six large panels, consist of 39 static specimens, 10 fracture mechanics specimens, and one each full size panel for compression stability and fracture mechanics testing. Tests are performed at temperatures of -54 C (-65 F), room temperature, and 260 C (500 F).

Development and in vitro evaluation of expandable gastroretentive dosage forms based on compressed collagen sponges.

PubMed

Gröning, R; Cloer, C; Müller, R S

2006-07-01

The objective of this study was to develop and evaluate new collagen gastroretentive dosage forms (GRDFs) which expand in the stomach after contact with gastric fluids. The GRDFs should remain in the stomach for a prolonged period of time due to their size. The dosage forms were prepared from collagen sponges. The sponges were manufactured by freeze-drying a riboflavin-containing collagen solution. A computer controlled material supply was constructed to transport precompressed collagen into a tablet machine. A second type of tablet was manufactured by combining compressed collagen sponges with hydrophilic matrix layers of hydroxypropylmethylcellulose. Matrix layers containing captopril or aciclovir were developed. In vitro experiments were performed with both types of dosage forms. The collagen tablets expand within a few minutes after contact with artificial gastric juice and form a drug delivery system with a size of 8 mm x 18 mm x 60 mm. Riboflavin is released over 16 h. If two layer tablets are used, the release of aciclovir or captopril can be controlled by the composition of the sustained release layer.

Behavioral patterns of environmental performance evaluation programs.

PubMed

Li, Wanxin; Mauerhofer, Volker

2016-11-01

During the past decades numerous environmental performance evaluation programs have been developed and implemented on different geographic scales. This paper develops a taxonomy of environmental management behavioral patterns in order to provide a practical comparison tool for environmental performance evaluation programs. Ten such programs purposively selected are mapped against the identified four behavioral patterns in the form of diagnosis, negotiation, learning, and socialization and learning. Overall, we found that schemes which serve to diagnose environmental abnormalities are mainly externally imposed and have been developed as a result of technical debates concerning data sources, methodology and ranking criteria. Learning oriented scheme is featured by processes through which free exchange of ideas, mutual and adaptive learning can occur. Scheme developed by higher authority for influencing behaviors of lower levels of government has been adopted by the evaluated to signal their excellent environmental performance. The socializing and learning classified evaluation schemes have incorporated dialogue, participation, and capacity building in program design. In conclusion we consider the 'fitness for purpose' of the various schemes, the merits of our analytical model and the future possibilities of fostering capacity building in the realm of wicked environmental challenges. Copyright © 2016 Elsevier Ltd. All rights reserved.

Ten Teamwork Terminators and Some Sure Cures.

ERIC Educational Resources Information Center

Child Care Information Exchange, 1992

1992-01-01

This article describes 10 behaviors of day care center directors that undermine the team performance of the caregiving staff. Also described are three behaviors that are crucial to fostering successful teamwork. A day care center teamwork evaluation form for staff is provided. (BC)

Development and evaluation of a monolithic floating dosage form for furosemide.

PubMed

Menon, A; Ritschel, W A; Sakr, A

1994-02-01

The poor bioavailability of orally dosed furosemide (60%), a weakly acidic drug, is due to the presence of a biological window comprised of the upper gastrointestinal tract. The purpose of the present study was to develop and optimize in vitro a monolithic modified-release dosage form (MMR) for furosemide with increased gastric residence time and to evaluate the in vivo performance of the dosage form. The principle of floatation was used to restrict the MMR to the stomach. A two-factor three-level full factorial experimental design was employed for formulation development. A flow-through cell was designed to evaluate in vitro dissolution parameters. Quadratic regression models indicated the polymer viscosity and polymer:drug ratio to be significant (p < 0.05) formulation factors in determining the duration of buoyancy and the release profile. Statistical optimization using response surface methodology with certain physiological constraints relating to gastric emptying time predicted an optimal MMR. In vivo evaluation of the optimized MMR in beagle dogs resulted in a significant increase (p < 0.05) in the absolute bioavailability for the MMR dosage form (42.9%) as compared to the commercially available tablet (33.4%) and enteric product (29.5%). Significant in vitro/in vivo correlations (p < 0.05) were obtained for the MMR using deconvolution analysis normalized for bioavailability. The floating dosage form was found to be a feasible approach in delivering furosemide to the upper gastrointestinal tract to maximize drug absorption.

Performance of Environmental Resources of a Tourist Destination

PubMed Central

2013-01-01

Despite the apparent importance of destinations’ environmental resources, there appears to be little theoretical and applied research explicitly focusing on destination environmental supply. This research attempts to address this gap in the literature. First, it reviews and evaluates the body of research in tourism environmental resources and proposes a conceptual model to test their performance. The model combines tourism supply–demand view with importance–performance gaps and was used to survey tourism in Slovenia. The results show that the studied destination uses its environmental resources too extensively and that Slovenian environmental tourism experience does not meet visitors’ expectations. This finding challenges Slovenian policy makers, who position Slovenia as a green destination. The proposed model can form the basis for further conceptual and empirical research into the tourism contributions of environmental resources. In its present form, it can be used to examine environmental performance and to suggest policy implications for any destination. PMID:29901033

TOPEX orbital radiation study

NASA Technical Reports Server (NTRS)

Stassinopoulos, E. G.; Barth, J. M.

1984-01-01

The space radiation environment of the TOPEX spacecraft is investigated. A single trajectory was considered. The external (surface incident) charged particle radiation, predicted for the satellite, is determined by orbital flux integration for the specified trajectory. The latest standard models of the environment are used in the calculations. The evaluation is performed for solar maximum conditions. The spacecraft exposure to cosmic rays of galactic origin is evaluated over its flight path through the magnetosphere in terms of geomagnetic shielding effects, both for surface incident heavy ions and for particles emerging behind different material thickness. Limited shielding and dose evaluations are performed for simple infinite slab and spherical geometries. Results, given in graphical and tabular form, are analyzed, explained, and discussed. Conclusions are presented and commented on.

Reliability and Validity of the Turkish Version of the Job Performance Scale Instrument.

PubMed

Harmanci Seren, Arzu Kader; Tuna, Rujnan; Eskin Bacaksiz, Feride

2018-02-01

Objective measurement of the job performance of nursing staff using valid and reliable instruments is important in the evaluation of healthcare quality. A current, valid, and reliable instrument that specifically measures the performance of nurses is required for this purpose. The aim of this study was to determine the validity and reliability of the Turkish version of the Job Performance Instrument. This study used a methodological design and a sample of 240 nurses working at different units in four hospitals in Istanbul, Turkey. A descriptive data form, the Job Performance Scale, and the Employee Performance Scale were used to collect data. Data were analyzed using IBM SPSS Statistics Version 21.0 and LISREL Version 8.51. On the basis of the data analysis, the instrument was revised. Some items were deleted, and subscales were combined. The Turkish version of the Job Performance Instrument was determined to be valid and reliable to measure the performance of nurses. The instrument is suitable for evaluating current nursing roles.

Performance study of a data flow architecture

NASA Technical Reports Server (NTRS)

Adams, George

1985-01-01

Teams of scientists studied data flow concepts, static data flow machine architecture, and the VAL language. Each team mapped its application onto the machine and coded it in VAL. The principal findings of the study were: (1) Five of the seven applications used the full power of the target machine. The galactic simulation and multigrid fluid flow teams found that a significantly smaller version of the machine (16 processing elements) would suffice. (2) A number of machine design parameters including processing element (PE) function unit numbers, array memory size and bandwidth, and routing network capability were found to be crucial for optimal machine performance. (3) The study participants readily acquired VAL programming skills. (4) Participants learned that application-based performance evaluation is a sound method of evaluating new computer architectures, even those that are not fully specified. During the course of the study, participants developed models for using computers to solve numerical problems and for evaluating new architectures. These models form the bases for future evaluation studies.

In the Pen of the Author or Eye of the Beholder? A Measurement Framework for Understanding Peer Evaluation in Writing Assignments

ERIC Educational Resources Information Center

Branum-Martin, Lee; Patchan, Melissa M.

2016-01-01

Peer learning is often used in classrooms to help and support knowledge and skill acquisition. One form of peer learning, peer assessment, involves the quantitative (i.e., peer ratings) or qualitative (i.e., peer feedback) evaluation of a learner's performance by another learner among students. While we might be concerned about the quality of the…

Performance of the split-symbol moments SNR estimator in the presence of inter-symbol interference

NASA Technical Reports Server (NTRS)

Shah, B.; Hinedi, S.

1989-01-01

The Split-Symbol Moments Estimator (SSME) is an algorithm that is designed to estimate symbol signal-to-noise ratio (SNR) in the presence of additive white Gaussian noise (AWGN). The performance of the SSME algorithm in band-limited channels is examined. The effects of the resulting inter-symbol interference (ISI) are quantified. All results obtained are in closed form and can be easily evaluated numerically for performance prediction purposes. Furthermore, they are validated through digital simulations.

Smartphone form factors: Effects of width and bottom bezel on touch performance, workload, and physical demand.

PubMed

Lee, Seul Chan; Cha, Min Chul; Hwangbo, Hwan; Mo, Sookhee; Ji, Yong Gu

2018-02-01

This study aimed at investigating the effect of two smartphone form factors (width and bottom bezel) on touch behaviors with one-handed interaction. User experiments on tapping tasks were conducted for four widths (67, 70, 72, and 74 mm) and five bottom bezel levels (2.5, 5, 7.5, 10, and 12.5 mm). Task performance, electromyography, and subjective workload data were collected to examine the touch behavior. The success rate and task completion time were collected as task performance measures. The NASA-TLX method was used to observe the subjective workload. The electromyogram signals of two thumb muscles, namely the first dorsal interosseous and abductor pollicis brevis, were observed. The task performances deteriorated with increasing width level. The subjective workload and electromyography data showed similar patterns with the task performances. The task performances of the bottom bezel devices were analyzed by using three different evaluation criteria. The results from these criteria indicated that tasks became increasingly difficult as the bottom bezel level decreased. The results of this study provide insights into the optimal range of smartphone form factors for one-handed interaction, which could contribute to the design of new smartphones. Copyright © 2017. Published by Elsevier Ltd.

Round-off error in long-term orbital integrations using multistep methods

NASA Technical Reports Server (NTRS)

Quinlan, Gerald D.

1994-01-01

Techniques for reducing roundoff error are compared by testing them on high-order Stormer and summetric multistep methods. The best technique for most applications is to write the equation in summed, function-evaluation form and to store the coefficients as rational numbers. A larger error reduction can be achieved by writing the equation in backward-difference form and performing some of the additions in extended precision, but this entails a larger central processing unit (cpu) cost.

State Derivation of a 12-Axis Gyroscope-Free Inertial Measurement Unit

PubMed Central

Lu, Jau-Ching; Lin, Pei-Chun

2011-01-01

The derivation of linear acceleration, angular acceleration, and angular velocity states from a 12-axis gyroscope-free inertial measurement unit that utilizes four 3-axis accelerometer measurements at four distinct locations is reported. Particularly, a new algorithm which derives the angular velocity from its quadratic form and derivative form based on the context-based interacting multiple model is demonstrated. The performance of the system was evaluated under arbitrary 3-dimensional motion. PMID:22163791

Numerical analysis of tailored sheets to improve the quality of components made by SPIF

NASA Astrophysics Data System (ADS)

Gagliardi, Francesco; Ambrogio, Giuseppina; Cozza, Anna; Pulice, Diego; Filice, Luigino

2018-05-01

In this paper, the authors pointed out a study on the profitable combination of forming techniques. More in detail, the attention has been put on the combination of the single point incremental forming (SPIF) and, generally, speaking, of an additional process that can lead to a material thickening on the initial blank considering the local thinning which the sheets undergo at. Focalizing the attention of the research on the excessive thinning of parts made by SPIF, a hybrid approach can be thought as a viable solution to reduce the not homogeneous thickness distribution of the sheet. In fact, the basic idea is to work on a blank previously modified by a deformation step performed, for instance, by forming, additive or subtractive processes. To evaluate the effectiveness of this hybrid solution, a FE numerical model has been defined to analyze the thickness variation on tailored sheets incrementally formed optimizing the material distribution according to the shape to be manufactured. Simulations based on the explicit formulation have been set up for the model implementation. The mechanical properties of the sheet material have been taken in literature and a frustum of cone as benchmark profile has been considered for the performed analysis. The outcomes of numerical model have been evaluated in terms of both maximum thinning and final thickness distribution. The feasibility of the proposed approach will be deeply detailed in the paper.

Effects of die quench forming on sheet thinning and 3-point bend testing of AA7075-T6

NASA Astrophysics Data System (ADS)

Kim, Samuel; Omer, Kaab; Rahmaan, Taamjeed; Butcher, Clifford; Worswick, Michael

2017-10-01

Lab-scaled AA7075 aluminum side impact beams were manufactured using the die quenching technique in which the sheet was solutionized and then quenched in-die during forming to a super saturated solid state. Sheet thinning measurements were taken at various locations throughout the length of the part and the effect of lubricant on surface scoring and material pick-up on the die was evaluated. The as-formed beams were subjected to a T6 aging treatment and then tested in three-point bending. Simulations were performed of the forming and mechanical testing experiments using the LS-DYNA finite element code. The thinning and mechanical response was predicted well.

Determination of the main solid-state form of albendazole in bulk drug, employing Raman spectroscopy coupled to multivariate analysis.

PubMed

Calvo, Natalia L; Arias, Juan M; Altabef, Aída Ben; Maggio, Rubén M; Kaufman, Teodoro S

2016-09-10

Albendazole (ALB) is a broad-spectrum anthelmintic, which exhibits two solid-state forms (Forms I and II). The Form I is the metastable crystal at room temperature, while Form II is the stable one. Because the drug has poor aqueous solubility and Form II is less soluble than Form I, it is desirable to have a method to assess the solid-state form of the drug employed for manufacturing purposes. Therefore, a Partial Least Squares (PLS) model was developed for the determination of Form I of ALB in its mixtures with Form II. For model development, both solid-state forms of ALB were prepared and characterized by microscopic (optical and with normal and polarized light), thermal (DSC) and spectroscopic (ATR-FTIR, Raman) techniques. Mixtures of solids in different ratios were prepared by weighing and mechanical mixing of the components. Their Raman spectra were acquired, and subjected to peak smoothing, normalization, standard normal variate correction and de-trending, before performing the PLS calculations. The optimal spectral region (1396-1280cm(-1)) and number of latent variables (LV=3) were obtained employing a moving window of variable size strategy. The method was internally validated by means of the leave one out procedure, providing satisfactory statistics (r(2)=0.9729 and RMSD=5.6%) and figures of merit (LOD=9.4% and MDDC=1.4). Furthermore, the method's performance was also evaluated by analysis of two validation sets. Validation set I was used for assessment of linearity and range and Validation set II, to demonstrate accuracy and precision (Recovery=101.4% and RSD=2.8%). Additionally, a third set of spiked commercial samples was evaluated, exhibiting excellent recoveries (94.2±6.4%). The results suggest that the combination of Raman spectroscopy with multivariate analysis could be applied to the assessment of the main crystal form and its quantitation in samples of ALB bulk drug, in the routine quality control laboratory. Copyright © 2016 Elsevier B.V. All rights reserved.

Design and evaluation of an ultra-slim objective for in-vivo deep optical biopsy

PubMed Central

Landau, Sara M.; Liang, Chen; Kester, Robert T.; Tkaczyk, Tomasz S.; Descour, Michael R.

2010-01-01

An estimated 1.6 million breast biopsies are performed in the US each year. In order to provide real-time, in-vivo imaging with sub-cellular resolution for optical biopsies, we have designed an ultra-slim objective to fit inside the 1-mm-diameter hypodermic needles currently used for breast biopsies to image tissue stained by the fluorescent probe proflavine. To ensure high-quality imaging performance, experimental tests were performed to characterize fiber bundle’s light-coupling efficiency and simulations were performed to evaluate the impact of candidate lens materials’ autofluorescence. A prototype of NA = 0.4, 250-µm field of view, ultra-slim objective optics was built and tested, yielding diffraction-limited performance and estimated resolution of 0.9 µm. When used in conjunction with a commercial coherent fiber bundle to relay the image formed by the objective, the measured resolution was 2.5 µm. PMID:20389489

Multicriteria decision-aid method to evaluate the performance of stormwater infiltration systems over the time.

PubMed

Moura, P; Barraud, S; Baptista, M B; Malard, F

2011-01-01

Nowadays, stormwater infiltration systems are frequently used because of their ability to reduce flows and volumes in downstream sewers, decrease overflows in surface waters and make it possible to recharge groundwater. Moreover, they come in various forms with different uses. Despite these advantages the long term sustainability of these systems is questionable and their real performances have to be assessed taking into account various and sometimes conflicting aspects. To address this problem a decision support system is proposed. It is based on a multicriteria method built to help managers to evaluate the performance of an existing infiltration system at different stages of its lifespan and identify whether it performs correctly or not, according to environmental, socio-economic, technical and sanitary aspects. The paper presents successively: the performance indicators and the way they were built, the multicriteria method to identify if the system works properly and a case study.

Conjugating binary systems for spacecraft thermal control

NASA Technical Reports Server (NTRS)

Grodzka, Philomena G.; Dean, William G.; Sisk, Lori A.; Karu, Zain S.

1989-01-01

The materials search was directed to liquid pairs which can form hydrogen bonds of just the right strength, i.e., strong enough to give a high heat of mixing, but weak enough to enable phase change to occur. The cursory studies performed in the area of additive effects indicate that Conjugating Binary (CB) performance can probably be fine-tuned by this means. The Fluid Loop Test Systems (FLTS) tests of candidate CBs indicate that the systems Triethylamine (TEA)/water and propionaldehyde/water show close to the ideal, reversible behavior, at least initially. The Quick Screening Tests QSTs and FLTS tests, however, both suffer from rather severe static due either to inadequate stirring or temperature control. Thus it is not possible to adequately evaluate less than ideal CB performers. Less than ideal performers, it should be noted, may have features that make them better practical CBs than ideal performers. Improvement of the evaluation instrumentation is thus indicated.

Secondary Waste Form Screening Test Results—Cast Stone and Alkali Alumino-Silicate Geopolymer

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pierce, Eric M.; Cantrell, Kirk J.; Westsik, Joseph H.

2010-06-28

PNNL is conducting screening tests on the candidate waste forms to provide a basis for comparison and to resolve the formulation and data needs identified in the literature review. This report documents the screening test results on the Cast Stone cementitious waste form and the Geopolymer waste form. Test results suggest that both the Cast Stone and Geopolymer appear to be viable waste forms for the solidification of the secondary liquid wastes to be treated in the ETF. The diffusivity for technetium from the Cast Stone monoliths was in the range of 1.2 × 10-11 to 2.3 × 10-13 cm2/smore » during the 63 days of testing. The diffusivity for technetium from the Geopolymer was in the range of 1.7 × 10-10 to 3.8 × 10-12 cm2/s through the 63 days of the test. These values compare with a target of 1 × 10-9 cm2/s or less. The Geopolymer continues to show some fabrication issues with the diffusivities ranging from 1.7 × 10-10 to 3.8 × 10-12 cm2/s for the better-performing batch to from 1.2 × 10-9 to 1.8 × 10-11 cm2/s for the poorer-performing batch. In the future more comprehensive and longer term performance testing will be conducted, to further evaluate whether or not these waste forms will meet the regulation and performance criteria needed to cost-effectively dispose of secondary wastes.« less

First results of the wind evaluation breadboard for ELT primary mirror design

NASA Astrophysics Data System (ADS)

Reyes García-Talavera, Marcos; Viera, Teodora; Núñez, Miguel

2010-07-01

The Wind Evaluation Breadboard (WEB) is a primary mirror and telescope simulator formed by seven aluminium segments, including position sensors, electromechanical support systems and support structures. WEB has been developed to evaluate technologies for primary mirror wavefront control and to evaluate the performance of the control of wind buffeting disturbance on ELT segmented mirrors. For this purpose WEB electro-mechanical set-up simulates the real operational constrains applied to large segmented mirrors. This paper describes the WEB assembly, integration and verification, the instrument characterisation and close loop control design, including the dynamical characterization of the instrument and the control architecture. The performance of the new technologies developed for position sensing, acting and controlling is evaluated. The integration of the instrument in the observatory and the results of the first experiments are summarised, with different wind conditions, elevation and azimuth angles of incidence. Conclusions are extracted with respect the wind rejection performance and the control strategy for an ELT. WEB has been designed and developed by IAC, ESO, ALTRAN and JUPASA, with the integration of subsystems of FOGALE and TNO.

[The Brazilian Hospital Information System and the acute myocardial infarction hospital care].

PubMed

Escosteguy, Claudia Caminha; Portela, Margareth Crisóstomo; Medronho, Roberto de Andrade; de Vasconcellos, Maurício Teixeira Leite

2002-08-01

To analyze the applicability of the Brazilian Unified Health System's national hospital database to evaluate the quality of acute myocardial infarction hospital care. It was evaluated 1,936 hospital admission forms having acute myocardial infarction (AMI) as primary diagnosis in the municipal district of Rio de Janeiro, Brazil, in 1997. Data was collected from the national hospital database. A stratified random sampling of 391 medical records was also evaluated. AMI diagnosis agreement followed the literature criteria. Variable accuracy analysis was performed using kappa index agreement. The quality of AMI diagnosis registered in hospital admission forms was satisfactory according to the gold standard of the literature. In general, the accuracy of the variables demographics (sex, age group), process (medical procedures and interventions), and outcome (hospital death) was satisfactory. The accuracy of demographics and outcome variables was higher than the one of process variables. Under registration of secondary diagnosis was high in the forms and it was the main limiting factor. Given the study findings and the widespread availability of the national hospital database, it is pertinent its use as an instrument in the evaluation of the quality of AMI medical care.

Material, process, and product design of thermoplastic composite materials

NASA Astrophysics Data System (ADS)

Dai, Heming

Thermoplastic composites made of polypropylene (PP) and E-glass fibers were investigated experimentally as well as theoretically for two new classes of product designs. The first application was for reinforcement of wood. Commingled PP/glass yarn was consolidated and bonded on wood panel using a tie layer. The processing parameters, including temperature, pressure, heating time, cooling time, bonding strength, and bending strength were tested experimentally and evaluated analytically. The thermoplastic adhesive interface was investigated with environmental scanning electron microscopy. The wood/composite structural design was optimized and evaluated using a Graphic Method. In the second application, we evaluated use of thermoplastic composites for explosion containment in an arrester. PP/glass yarn was fabricated in a sleeve form and wrapped around the arrester. After consolidation, the flexible composite sleeve forms a solid composite shell. The composite shell acts as a protection layer in a surge test to contain the fragments of the arrester. The manufacturing process for forming the composite shell was designed. Woven, knitted, and braided textile composite shells made of commingled PP/glass yarn were tested and evaluated. Mechanical performance of the woven, knitted, and braided composite shells was examined analytically. The theoretical predictions were used to verify the experimental results.

Lithium-Ion Performance and Abuse Evaluation Using Lithium Technologies 9Ah cell

NASA Technical Reports Server (NTRS)

Hall, Albert Daniel; Jeevarajan, Judith A.

2006-01-01

Lithium-ion batteries in a pouch form offer high energy density and safety in their designs and more recently they are offering performance at higher rates. Lithium Technologies 9Ah high-power pouch cells were studied at different rates, thermal environments, under vacuum and several different conditions of abuse including overcharge, over-discharge and external short circuit. Results of this study will be presented.

Ballast and Subgrade requirements study : railroad track substructure - design and performance evaluation practices

DOT National Transportation Integrated Search

1983-06-30

Earth materials--i.e., soil and rock--form the substructure (ballast, subballast, and subgrade) of all railroad track. In this report, the most suitable technology and design criteria as related to design of the substructure are identified based on a...

Inactivation of Escherichia coli by titanium dioxide photocatalytic oxidation.

EPA Science Inventory

Titanium dioxide in the anatase crystalline form was used as a photocatalyst to generate hydroxyl radicals in a flowthrough water reactor. Experiments were performed on pure cultures of Escherichia coli in dechlorinated tap water and a surface water sample to evaluate the disinfe...

Injuries and Illnesses of Vietnam War POWs Revisited: IV. Air Force Risk Factors

DTIC Science & Technology

2017-03-22

predominantly aviators imprisoned in North Vietnam. Statistical analyses were performed using SPSS version 19. Pearson correlations were obtained...Repatriated Prisoner of War Initial Medical Evaluation Forms. Department of Defense. Washington, D.C. 5. IBM Corporation (2010). IBM SPSS Statistics for

[Comparative evaluation of clinical and economic efficiency of paliperidone in various dosage forms used in patients with schizophrenia].

PubMed

D'yakov, I N; Zyryanov, S K

To evaluate clinical and economic efficacy of schizophrenia treatment with three forms of paliperidone (peroral form, intramuscular injections once a month and once in three month). Pharmacoeconomic analysis based on the results of earlier foreign randomized clinical studies on paliperidone in treatment of schizophrenia was carried out. Indirect comparison of different medication forms of paliperidone compared to placebo was performed. The analysis of costs was based on a Markov model built for the study. Two categories of costs: costs of pharmacological treatment with paliperidone and costs of disease exacerbation due to the violation of treatment regimen were considered. To assess pharmacoeconomic efficacy of paliperidone, a cost-benefit analysis with calculation of cost utility ratio (CUR) and incremental cost utility ratio (ICUR) was used. In view of the influence on the budget, all forms of paliperidone have similar pharmacoeconomic efficacy with the advantage of prolonged release injectable (depot) forms that increase patient's adherence to treatment. As a result, CUR of injectable forms was lower compared to that of the peroral form by 11,1 and 46,3% of month and 3-month forms, respectively. ICUR for paliperidone used once in 3 month (trevicta) was more effective compared to paliperidone used monthly (xeplion). It has been concluded that paliperidone for prolonged release injections used once in 3 month is most pharmacoeconomically effective.

Analysis of Community Participation Levels of Individuals Who Are Physically Disabled and Working in Industrial Environments.

PubMed

Tonak, Hasan Atacan; Kitis, Ali; Zencir, Mehmet

2016-01-01

The purpose of this study was to determine quality of life, leisure time satisfaction, activity performance, and community participation and analyze the relationship between these determinants and community participation in both physically disabled individuals working in industrial environments and nonworking individuals who are physically disabled. Sociodemographic data was registered into a sociodemographic form. World Health Organization Disability Assessment Schedule 2.0 was used to assess community participation. Activity performance was evaluated with Canadian Occupational Performance Measure. Leisure Satisfaction Scale was used to determine leisure time satisfaction. Short Form-36 was used for evaluating quality of life. When the participants were compared in terms of working status, a significant difference according to their WHO-DAS-II total scores were found (p < 0.05). When all participants were compared in terms of activity performance, lesisure time satisfaction, quality of life a significant differences according to their WHO-DAS-II total scores were found (p>0.05). This study shows that community participation was affected by working status, disability level, activity performance, leisure time satisfaction and quality of life. In this regard, occupational therapy and physiotherapy approaches were found necessary for developing community participation. We conclude that this study's results can be used as a guide for community participation in disabled people in community based rehabilitation politics.

The Evaluation of Cone Capsule as an Alternative Hull form for Portable Tsunami Lifeboat to Support Evacuation System in the Coastal Regions and Small Islands

NASA Astrophysics Data System (ADS)

Fauzan Zakki, Ahmad; Suharto; Windyandari, Aulia

2018-03-01

Several attempts have been made to reduce the risk of tsunami disasters such as the development of early warning systems, evacuation procedures training, coastal protection and coastal spatial planning. Although many efforts to mitigate the impact of the tsunami in Indonesia was made, no one has developed a portable disaster rescue vehicle/shelter as well as a lifeboat on ships and offshore building, which is always available when a disaster occurs. The aim of the paper is to evaluate the performance of cone capsule shaped hull form that would be used for the portable tsunami lifeboat. The investigation of the boat resistance, intact stability, and seakeeping characteristics was made. The numerical analysis results indicate that the cone capsule is reliable as an alternative hull form for the portable tsunami lifeboat.

Forward impact extrusion of surface textured steel blanks using coated tooling

NASA Astrophysics Data System (ADS)

Hild, Rafael; Feuerhack, Andreas; Trauth, Daniel; Arghavani, Mostafa; Kruppe, Nathan C.; Brögelmann, Tobias; Bobzin, Kirsten; Klocke, Fritz

2017-10-01

A method to enable dry metal forming by the means of a self-lubricating coating and surface textures was researched using an innovative Pin-On-Cylinder-Tribometer. The experimental analysis was complemented by a numerical model of the complex contact conditions between coated tools and the surface textured specimen at the micro-level. Based on the results, the explanation of the tribological interactions between surface textured specimens and the tool in dry full forward extrusion is the objective of this work. Therefore, experimental dry extrusion tests were performed using a tool system. The extruded specimens were evaluated regarding their geometry as well as by the required punch force. Thereby, the effectiveness and the feasibility of dry metal forming on the example of full forward extrusion was evaluated. Thus, one more step towards the technical realization of dry metal forming of low alloy steels under industrial conditions was realized.

SPITFIRE-1

NASA Technical Reports Server (NTRS)

Ryntz, Edward F.

1995-01-01

The purpose of this effort is to develop low-cost rapid forming superplastic aluminum that will be evaluated in pilot production trials for automotive SPF components. The alloy development study conducted under SPITFIRE-1 showed that the addition of CU or Mn to the base 5083 aluminum alloy refined the grain size, leading to enhanced superplastic properties. In SPITFIRE-2, these alloy variants will be further refined and studied to meet the target properties established earlier in the program. Mechanical properties, component forming and post-forming properties will be evaluated. Also, the alloy production process, including thermomechanical processing (TMP) optimization to reduce production cost, will be investigated during SPITFIRE-2. After identifying preferred compositions and production processing, the most promising alloy will be manufactured into production coils for verification during SPITFIRE-3. Components will be produced from these coils in SPITFIRE-4, and the process and component performance will be assessed.

Faculty Evaluations Correlate Poorly with Medical Student Examination Performance in a Fourth-Year Emergency Medicine Clerkship.

PubMed

Dubosh, Nicole M; Fisher, Jonathan; Lewis, Jason; Ullman, Edward A

2017-06-01

Clerkship directors routinely evaluate medical students using multiple modalities, including faculty assessment of clinical performance and written examinations. Both forms of evaluation often play a prominent role in final clerkship grade. The degree to which these modalities correlate in an emergency medicine (EM) clerkship is unclear. We sought to correlate faculty clinical evaluations with medical student performance on a written, standardized EM examination of medical knowledge. This is a retrospective study of fourth-year medical students in a 4-week EM elective at one academic medical center. EM faculty performed end of shift evaluations of students via a blinded online system using a 5-point Likert scale for 8 domains: data acquisition, data interpretation, medical knowledge base, professionalism, patient care and communication, initiative/reliability/dependability, procedural skills, and overall evaluation. All students completed the National EM M4 Examination in EM. Means, medians, and standard deviations for end of shift evaluation scores were calculated, and correlations with examination scores were assessed using a Spearman's rank correlation coefficient. Thirty-nine medical students with 224 discrete faculty evaluations were included. The median number of evaluations completed per student was 6. The mean score (±SD) on the examination was 78.6% ± 6.1%. The examination score correlated poorly with faculty evaluations across all 8 domains (ρ 0.074-0.316). Faculty evaluations of medical students across multiple domains of competency correlate poorly with written examination performance during an EM clerkship. Educators need to consider the limitations of examination score in assessing students' ability to provide quality patient clinical care. Copyright © 2016 Elsevier Inc. All rights reserved.

Thermionic converter performance with oxide collectors

NASA Technical Reports Server (NTRS)

Lieb, D.; Goodale, D.; Briere, T.; Balestra, C.

1977-01-01

Thermionic converters using a variety of metal oxide collector surfaces have been fabricated and tested. Both work function and power output data are presented and evaluated. Oxides of barium, strontium, zinc, tungsten and titanium have been incorporated into a variable spacing converter. Tungsten oxide was found to give the highest converter performance and to furnish oxygen for the emitter at the same time. Oxygenated emitters operate at reduced cesium pressure with an increase in electrode spacing. Electron spectroscopy for chemical analysis (ESCA) performed on several tungsten oxide collectors showed cesium penetration of the oxide layer, possibly forming a cesium tungstate bronze. Titanium oxide showed high performance but did not furnish oxygen for the emitter; strontium oxide, in the form of a sprayed layer, appeared to dissociate in the presence of cesium. Sprayed coatings of barium and zinc oxides produced collector work functions of about 1.3 eV, but had excessive series resistance. Lanthanum hexaboride, in combination with oxygen introduced through a silver tube, and cesium produced a low work function collector and better than average performance.

Source term model evaluations for the low-level waste facility performance assessment

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yim, M.S.; Su, S.I.

1995-12-31

The estimation of release of radionuclides from various waste forms to the bottom boundary of the waste disposal facility (source term) is one of the most important aspects of LLW facility performance assessment. In this work, several currently used source term models are comparatively evaluated for the release of carbon-14 based on a test case problem. The models compared include PRESTO-EPA-CPG, IMPACTS, DUST and NEFTRAN-II. Major differences in assumptions and approaches between the models are described and key parameters are identified through sensitivity analysis. The source term results from different models are compared and other concerns or suggestions are discussed.

Fully-Coupled Fluid/Structure Vibration Analysis Using MSC/NASTRAN

NASA Technical Reports Server (NTRS)

Fernholz, Christian M.; Robinson, Jay H.

1996-01-01

MSC/NASTRAN's performance in the solution of fully-coupled fluid/structure problems is evaluated. NASTRAN is used to perform normal modes (SOL 103) and forced-response analyses (SOL 108, 111) on cylindrical and cubic fluid/structure models. Bulk data file cards unique to the specification of a fluid element are discussed and analytic partially-coupled solutions are derived for each type of problem. These solutions are used to evaluate NASTRAN's solutions for accuracy. Appendices to this work include NASTRAN data presented in fringe plot form, FORTRAN source code listings written in support of this work, and NASTRAN data file usage requirements for each analysis.

The Evaluation of Hospital Performance in Iran: A Systematic Review Article

PubMed Central

BAHADORI, Mohammadkarim; IZADI, Ahmad Reza; GHARDASHI, Fatemeh; RAVANGARD, Ramin; HOSSEINI, Seyed Mojtaba

2016-01-01

Background: This research aimed to systematically study and outline the methods of hospital performance evaluation used in Iran. Methods: In this systematic review, all Persian and English-language articles published in the Iranian and non-Iranian scientific journals indexed from Sep 2004 to Sep 2014 were studied. For finding the related articles, the researchers searched the Iranian electronic databases, including SID, IranMedex, IranDoc, Magiran, as well as the non-Iranian electronic databases, including Medline, Embase, Scopus, and Google Scholar. For reviewing the selected articles, a data extraction form, developed by the researchers was used. Results: The entire review process led to the selection of 51 articles. The publication of articles on the hospital performance evaluation in Iran has increased considerably in the recent years. Besides, among these 51 articles, 38 articles (74.51%) had been published in Persian language and 13 articles (25.49%) in English language. Eight models were recognized as evaluation model for Iranian hospitals. Totally, in 15 studies, the data envelopment analysis model had been used to evaluate the hospital performance. Conclusion: Using a combination of model to integrate indicators in the hospital evaluation process is inevitable. Therefore, the Ministry of Health and Medical Education should use a set of indicators such as the balanced scorecard in the process of hospital evaluation and accreditation and encourage the hospital managers to use them. PMID:27516991

The Evaluation of Hospital Performance in Iran: A Systematic Review Article.

PubMed

Bahadori, Mohammadkarim; Izadi, Ahmad Reza; Ghardashi, Fatemeh; Ravangard, Ramin; Hosseini, Seyed Mojtaba

2016-07-01

This research aimed to systematically study and outline the methods of hospital performance evaluation used in Iran. In this systematic review, all Persian and English-language articles published in the Iranian and non-Iranian scientific journals indexed from Sep 2004 to Sep 2014 were studied. For finding the related articles, the researchers searched the Iranian electronic databases, including SID, IranMedex, IranDoc, Magiran, as well as the non-Iranian electronic databases, including Medline, Embase, Scopus, and Google Scholar. For reviewing the selected articles, a data extraction form, developed by the researchers was used. The entire review process led to the selection of 51 articles. The publication of articles on the hospital performance evaluation in Iran has increased considerably in the recent years. Besides, among these 51 articles, 38 articles (74.51%) had been published in Persian language and 13 articles (25.49%) in English language. Eight models were recognized as evaluation model for Iranian hospitals. Totally, in 15 studies, the data envelopment analysis model had been used to evaluate the hospital performance. Using a combination of model to integrate indicators in the hospital evaluation process is inevitable. Therefore, the Ministry of Health and Medical Education should use a set of indicators such as the balanced scorecard in the process of hospital evaluation and accreditation and encourage the hospital managers to use them.

Serum levels of interleukin-33 and its soluble form receptor (sST2) are associated with cognitive performance in patients with schizophrenia.

PubMed

de Campos-Carli, Salvina Maria; Miranda, Aline Silva; Dias, Ingrid Caroline Silva; de Oliveira, Amanda; Cruz, Breno Fiuza; Vieira, Érica Leandro Marciano; Rocha, Natalia Pessoa; Barbosa, Izabela Guimarães; Salgado, João Vinícius; Teixeira, Antônio Lúcio

2017-04-01

Changes in immune system have been reported in schizophrenia. This study aimed to evaluate the involvement of IL-33, a member of the IL-1 cytokine family, in schizophrenia and its association with cognitive performance in these patients. Forty patients with chronic schizophrenia and 40 healthy subjects participated in the study. Serum levels of IL-33 and sST2 (soluble form of the IL-33 receptor) were measured using enzyme-linked immunosorbent assay (ELISA). Patients were evaluated with the Brief Assessment of Cognition in Schizophrenia (BACS) and the Schizophrenia Cognition Rating Scale (SCoRS). Patients with schizophrenia and controls presented similar serum levels of IL-33 and sST2. Levels of both markers were positively correlated with cognitive performance in patients with schizophrenia. We found a significant correlation between IL-33 and sST2 levels and cognition in schizophrenia. Our results might help in the understanding of how immune markers are associated with cognitive impairment in schizophrenia. It remains to be determined whether the association between IL-33/sST2 and cognition is restricted to patients with schizophrenia. Copyright © 2017 Elsevier Inc. All rights reserved.

Dynamic Model Averaging in Large Model Spaces Using Dynamic Occam's Window.

PubMed

Onorante, Luca; Raftery, Adrian E

2016-01-01

Bayesian model averaging has become a widely used approach to accounting for uncertainty about the structural form of the model generating the data. When data arrive sequentially and the generating model can change over time, Dynamic Model Averaging (DMA) extends model averaging to deal with this situation. Often in macroeconomics, however, many candidate explanatory variables are available and the number of possible models becomes too large for DMA to be applied in its original form. We propose a new method for this situation which allows us to perform DMA without considering the whole model space, but using a subset of models and dynamically optimizing the choice of models at each point in time. This yields a dynamic form of Occam's window. We evaluate the method in the context of the problem of nowcasting GDP in the Euro area. We find that its forecasting performance compares well with that of other methods.

Dynamic Model Averaging in Large Model Spaces Using Dynamic Occam’s Window*

PubMed Central

Onorante, Luca; Raftery, Adrian E.

2015-01-01

Bayesian model averaging has become a widely used approach to accounting for uncertainty about the structural form of the model generating the data. When data arrive sequentially and the generating model can change over time, Dynamic Model Averaging (DMA) extends model averaging to deal with this situation. Often in macroeconomics, however, many candidate explanatory variables are available and the number of possible models becomes too large for DMA to be applied in its original form. We propose a new method for this situation which allows us to perform DMA without considering the whole model space, but using a subset of models and dynamically optimizing the choice of models at each point in time. This yields a dynamic form of Occam’s window. We evaluate the method in the context of the problem of nowcasting GDP in the Euro area. We find that its forecasting performance compares well with that of other methods. PMID:26917859

Assessing Army Values in New Soldiers: Development of a Behaviorally Anchored Peer Evaluation Form

DTIC Science & Technology

2015-02-03

evaluation has long been a valuable tool in school and workplace performance assessment, and has sparked military interest as a tool for leader...Values. Adhering to these values can affect Awards, promotions, selection to attend military schools , leadership positions, and desirable assignments (AR...by ratee and/or rater gender . Assessing the psychometric properties of AVBARS-PE The AVBARS-PE was administered to 50 BCT Soldiers (25 male and 25

'Munchausen syndrome by proxy' presenting as battered child syndrome: a report of two cases.

PubMed

Sugandhan, Selvendran; Gupta, Somesh; Khandpur, Sujay; Khanna, Neena; Mehta, Manju; Inna, Prashanth

2010-06-01

Child abuse is a major public health crisis and is on the rise. Dermatologists are frequently involved in its evaluation in differentiating abusive injuries from accidental injuries and in excluding pathological conditions that may mimic abuse. Battered child syndrome or physical abuse is not only a common form of child abuse but can also result from a rarer form of child abuse known as Munchausen syndrome by proxy. In this form of abuse, mother, who is the usual perpetrator, induces an illness or abuses the child for her own self-serving psychological needs. We report two cases of battered child syndrome. In both the cases, Psychiatric evaluation was performed on both parents. Observation through one-way mirror was done with the mother and the child alone. Routine hematological and biochemical investigations were done. Diagnosis of Munchausen syndrome by proxy was firmly established in one case and was considered as a possibility in the other. A multidisciplinary team effort is essential in evaluating such cases, and dermatologists should be aware and be well informed about this condition that can be potentially lethal but easily overlooked.

Improved piston ring materials for 650 deg C service

NASA Technical Reports Server (NTRS)

Bjorndahl, W. D.

1986-01-01

A program to develop piston ring material systems which will operate at 650C was performed. In this program, two candidate high temperature piston ring substrate materials, Carpenter 709-2 and 440B, were hot formed into the piston ring shape and subsequently evaluated. In a parallel development effort ceramic and metallic piston ring coating materials were applied to cast iron rings by various processing techniques and then subjected to thermal shock and wear evaluation. Finally, promising candidate coatings were applied to the most thermally stable hot formed substrate. The results of evaluation tests of the hot formed substrate show that Carpenter 709-2 has greater thermal stability than 440B. Of the candidate coatings, plasma transferred arc (PTA) applied tungsten carbide and molybdenum based systems exhibit the greatest resistance to thermal shock. For the ceramic based systems, thermal shock resistance was improved by bond coat grading. Wear testing was conducted to 650C (1202F). For ceramic systems, the alumina/titania/zirconia/yttria composition showed highest wear resistance. For the PTA applied systems, the tungsten carbide based system showed highest wear resistance.

Delayed release film coating applications on oral solid dosage forms of proton pump inhibitors: case studies.

PubMed

Missaghi, Shahrzad; Young, Cara; Fegely, Kurt; Rajabi-Siahboomi, Ali R

2010-02-01

Formulation of proton pump inhibitors (PPIs) into oral solid dosage forms is challenging because the drug molecules are acid-labile. The aim of this study is to evaluate different formulation strategies (monolithic and multiparticulates) for three PPI drugs, that is, rabeprazole sodium, lansoprazole, and esomeprazole magnesium, using delayed release film coating applications. The core tablets of rabeprazole sodium were prepared using organic wet granulation method. Multiparticulates of lansoprazole and esomeprazole magnesium were prepared through drug layering of sugar spheres, using powder layering and suspension layering methods, respectively. Tablets and drug-layered multiparticulates were seal-coated, followed by delayed release film coating application, using Acryl-EZE(R), aqueous acrylic enteric system. Multiparticulates were then filled into capsules. The final dosage forms were evaluated for physical properties, as well as in vitro dissolution testing in both compendial acid phase, 0.1N HCl (pH 1.2), and intermediate pH, acetate buffer (pH 4.5), followed by phosphate buffer, pH 6.8. The stability of the delayed release dosage forms was evaluated upon storage in accelerated conditions [40 degrees C/75% relative humidity] for 3 months. All dosage forms demonstrated excellent enteric protection in the acid phase, followed by rapid release in their respective buffer media. Moreover, the delayed release dosage forms remained stable under accelerated stability conditions for 3 months. Results showed that Acryl-EZE enteric coating systems provide excellent performance in both media (0.1N HCl and acetate buffer pH 4.5) for monolithic and multiparticulate dosage forms.

Validation of Welding Curriculum Manual.

ERIC Educational Resources Information Center

Stone, Sheila D.

A study was conducted to validate the welding curriculum materials developed and published by the Oklahoma State Department of Vocational and Technical Education. Twelve instructors collected achievement data (unit tests, assignment sheets, and evaluation forms) concerning the performance of 280 students on a total of 46 instructional units. Item…

Participation and Family Education in School: Successful Educational Actions

ERIC Educational Resources Information Center

Garcia, Lars Bonell; Ríos, Oriol

2014-01-01

The research "INCLUD-ED, Strategies for Inclusion and Social Cohesion in Europe from Education" (2006-11) identified several forms of family participation that contribute to the improvement of school performance and living together in schools: participation in decision-making processes, participation in the evaluation of educational…

Diagnostic performance and useful findings of ultrasound re-evaluation for patients with equivocal CT features of acute appendicitis.

PubMed

Kim, Mi Sung; Kwon, Heon-Ju; Kang, Kyung A; Do, In-Gu; Park, Hee-Jin; Kim, Eun Young; Hong, Hyun Pyo; Choi, Yoon Jung; Kim, Young Hwan

2018-02-01

To evaluate the diagnostic performance of ultrasound and to determine which ultrasound findings are useful to differentiate appendicitis from non-appendicitis in patients who underwent ultrasound re-evaluation owing to equivocal CT features of acute appendicitis. 62 patients who underwent CT examinations for suspected appendicitis followed by ultrasound re-evaluation owing to equivocal CT findings were included. Equivocal CT findings were considered based on the presence of only one or two findings among the CT criteria, and ultrasound re-evaluation was done based on a predefined structured report form. The diagnostic performance of ultrasound and independent variables to discriminate appendicitis from non-appendicitis were assessed. There were 27 patients in the appendicitis group. The overall diagnostic performance of ultrasound re-evaluation was sensitivity of 96.3%, specificity of 91.2% and accuracy of 91.9%. In terms of the performance of individual ultrasound findings, probe-induced tenderness showed the highest accuracy (86.7%) with sensitivity of 74% and specificity of 97%, followed by non-compressibility (accuracy 71.7%, sensitivity 85.2% and specificity 60.6%). The independent ultrasound findings for discriminating appendicitis were non-compressibility (p = 0.002) and increased flow on the appendiceal wall (p = 0.001). Ultrasound re-evaluation can be used to improve diagnostic accuracy in cases with equivocal CT features for diagnosing appendicitis. The presence of non-compressibility and increased vascular flow on the appendix wall are useful ultrasound findings to discriminate appendicitis from non-appendicitis. Advances in knowledge: Ultrasound re-evaluation is useful to discriminate appendicitis from non-appendicitis when CT features are inconclusive.

Electrospun polylactic acid and polyvinyl alcohol fibers as efficient and stable nanomaterials for immobilization of lipases.

PubMed

Sóti, Péter Lajos; Weiser, Diana; Vigh, Tamás; Nagy, Zsombor Kristóf; Poppe, László; Marosi, György

2016-03-01

Electrospinning was applied to create easy-to-handle and high-surface-area membranes from continuous nanofibers of polyvinyl alcohol (PVA) or polylactic acid (PLA). Lipase PS from Burkholderia cepacia and Lipase B from Candida antarctica (CaLB) could be immobilized effectively by adsorption onto the fibrous material as well as by entrapment within the electrospun nanofibers. The biocatalytic performance of the resulting membrane biocatalysts was evaluated in the kinetic resolution of racemic 1-phenylethanol (rac-1) and 1-phenylethyl acetate (rac-2). Fine dispersion of the enzymes in the polymer matrix and large surface area of the nanofibers resulted in an enormous increase in the activity of the membrane biocatalyst compared to the non-immobilized crude powder forms of the lipases. PLA as fiber-forming polymer for lipase immobilization performed better than PVA in all aspects. Recycling studies with the various forms of electrospun membrane biocatalysts in ten cycles of the acylation and hydrolysis reactions indicated excellent stability of this forms of immobilized lipases. PLA-entrapped lipases could preserve lipase activity and enantiomer selectivity much better than the PVA-entrapped forms. The electrospun membrane forms of CaLB showed high mechanical stability in the repeated acylations and hydrolyses than commercial forms of CaLB immobilized on polyacrylamide beads (Novozyme 435 and IMMCALB-T2-150).

Comparison of 2 kinds of pedicle screws in primary spinal instrumentation: biomechanical and interfacial evaluations in sheep vertebrae in vitro.

PubMed

Liu, Da; Zhang, Yi; Lei, Wei; Wang, Cai-ru; Xie, Qing-yun; Liao, Dong-fa; Jiang, Kai; Zhou, Jin-song; Zhang, Bo; Pan, Xian-ming

2014-04-01

Expansive pedicle screw (EPS) and polymethylmethacrylate-augmented pedicle screw (PMMA-PS) were inserted in sheep vertebrae in vitro and were evaluated by performing biomechanical tests, radiographic examinations and histological observations. The objective of the study was to compare the biomechanical and interfacial performances of EPS and PMMA-PS in sheep lumbar vertebrae in vitro. It is a great challenge for orthopedic surgeons performing transpedicular fixation in the osteoporotic spine. It was reported that either the EPS or PMMA-PS could increase the screw stability. However, there are no studies comparing the 2 kinds of screws especially in primary spinal instrumentation. A total of 60 sheep lumbar vertebrae were randomly divided into 3 groups. A pilot hole was made in advance in all samples using the same method. Thereafter, the conventional pedicle screw (CPS) was inserted directly into the pilot hole in the CPS group; the hole in PMMA-PS group was first filled with polymethylmethacrylate (PMMA; 1.0 mL) and then inserted with CPS; and the EPS was inserted directly into the vertebrae in EPS group. After a period of 24 hours, biomechanical tests were performed to evaluate screw stability, and x-ray examination, micro-computerized tomography analysis, and histologic observation were performed to evaluate the interface between screw and bone. Compared with the stability of CPS, those of EPS and PMMA-PS were significantly enhanced. However, no significant differences were detected between the stabilities of EPS and PMMA-PS. The PMMA surrounding the screw blocked direct contact between bone and screw and formed a "screw-PMMA-bone" interface in the PMMA-PS group. There was a "screw-bone" interface in both CPS and EPS groups. Nevertheless, the expanded anterior part of EPS formed a claw-like structure pressing the surrounding bone trabeculae, which made the local bone tissue more compacted and denser than that in the CPS group. EPS can enhance the screw stability as markedly as the traditional PMMA-PS in primary surgery, and EPS can form a better immediate interface between screw and bone compared with PMMA-PS. EPS also can effectively avoid thermal injury, leakage, and compression caused by PMMA. A great feasibility was proved in this study to perform comparisons between the 2 kinds of pedicle screws in osteoporotic sheep vertebrae in vivo in the further research. In conclusion, we propose that EPS has a great application potential in augmentation of screw stability in the clinic.

MVIAeval: a web tool for comprehensively evaluating the performance of a new missing value imputation algorithm.

PubMed

Wu, Wei-Sheng; Jhou, Meng-Jhun

2017-01-13

Missing value imputation is important for microarray data analyses because microarray data with missing values would significantly degrade the performance of the downstream analyses. Although many microarray missing value imputation algorithms have been developed, an objective and comprehensive performance comparison framework is still lacking. To solve this problem, we previously proposed a framework which can perform a comprehensive performance comparison of different existing algorithms. Also the performance of a new algorithm can be evaluated by our performance comparison framework. However, constructing our framework is not an easy task for the interested researchers. To save researchers' time and efforts, here we present an easy-to-use web tool named MVIAeval (Missing Value Imputation Algorithm evaluator) which implements our performance comparison framework. MVIAeval provides a user-friendly interface allowing users to upload the R code of their new algorithm and select (i) the test datasets among 20 benchmark microarray (time series and non-time series) datasets, (ii) the compared algorithms among 12 existing algorithms, (iii) the performance indices from three existing ones, (iv) the comprehensive performance scores from two possible choices, and (v) the number of simulation runs. The comprehensive performance comparison results are then generated and shown as both figures and tables. MVIAeval is a useful tool for researchers to easily conduct a comprehensive and objective performance evaluation of their newly developed missing value imputation algorithm for microarray data or any data which can be represented as a matrix form (e.g. NGS data or proteomics data). Thus, MVIAeval will greatly expedite the progress in the research of missing value imputation algorithms.

Evaluation of an Outer Loop Retrofit Architecture for Intelligent Turbofan Engine Thrust Control

NASA Technical Reports Server (NTRS)

Litt, Jonathan S.; Sowers, T. Shane

2006-01-01

The thrust control capability of a retrofit architecture for intelligent turbofan engine control and diagnostics is evaluated. The focus of the study is on the portion of the hierarchical architecture that performs thrust estimation and outer loop thrust control. The inner loop controls fan speed so the outer loop automatically adjusts the engine's fan speed command to maintain thrust at the desired level, based on pilot input, even as the engine deteriorates with use. The thrust estimation accuracy is assessed under nominal and deteriorated conditions at multiple operating points, and the closed loop thrust control performance is studied, all in a complex real-time nonlinear turbofan engine simulation test bed. The estimation capability, thrust response, and robustness to uncertainty in the form of engine degradation are evaluated.

A new approach using coagulation rate constant for evaluation of turbidity removal

NASA Astrophysics Data System (ADS)

Al-Sameraiy, Mukheled

2017-06-01

Coagulation-flocculation-sedimentation processes for treating three levels of bentonite synthetic turbid water using date seeds (DS) and alum (A) coagulants were investigated in the previous research work. In the current research, the same experimental results were used to adopt a new approach on a basis of using coagulation rate constant as an investigating parameter to identify optimum doses of these coagulants. Moreover, the performance of these coagulants to meet (WHO) turbidity standard was assessed by introducing a new evaluating criterion in terms of critical coagulation rate constant (kc). Coagulation rate constants (k2) were mathematically calculated in second order form of coagulation process for each coagulant. The maximum (k2) values corresponded to doses, which were obviously to be considered as optimum doses. The proposed criterion to assess the performance of coagulation process of these coagulants was based on the mathematical representation of (WHO) turbidity guidelines in second order form of coagulation process stated that (k2) for each coagulant should be ≥ (kc) for each level of synthetic turbid water. For all tested turbid water, DS coagulant could not satisfy it. While, A coagulant could satisfy it. The results obtained in the present research are exactly in agreement with the previous published results in terms of finding optimum doses for each coagulant and assessing their performances. On the whole, it is recommended considering coagulation rate constant to be a new approach as an indicator for investigating optimum doses and critical coagulation rate constant to be a new evaluating criterion to assess coagulants' performance.

The Corrosion of High Performance Steel in Adverse Environments

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cook, Desmond C.

The corrosion products that have formed on weathering steel bridges exposed to different weather conditions in the United States have been evaluated. They have been analyzed by spectroscopic techniques to determine the relationship between protective and non-protective rust coatings, and their relationship to the exposure conditions. Bridges constructed recently using High Performance Steel, as well as older bridges built with Type A588B weathering steel, were evaluated for corrosion performance of the rust coatings. In locations where the steel is subjected to regular wet-dry cycling, where the surface is wet for less than about 20% of the time, a protective patinamore » starts to form after a few months exposure, and continues to an adherent, impervious coating after a decade. The protective patina is characterized by the formation of only goethite and lepidocrocite. The goethite makes up about 80% of the rust, and itself consists of a nanophase component, < 15 nm, making up about 70% of the goethite. The nanophase goethite is basically undetected by X-ray diffraction. In the presence of high time-of-wetness, >40%, or infrequent drying cycles (regions close to waterways, fog or having high humidity), the weathering steel forms a rust coating that consists of a large amount of maghemite, and goethite that contains very little of the nanophase component. The rust coating ex-foliates from the steel and is not protective. Under exposure conditions in which chlorides are deposited onto the weathering steel surface (marine or de-icing salt locations), the protective patina also does not form. Instead, the rust coating consists of a large fraction of akaganeite that forms at the expense of the lepidocrocite and nanophase goethite. The bridges exposed to high chloride concentrations, 1.5 wt%, and therefore having no protective patina, have corrosion rates measured to be 6 times larger than expected for weathering steel with the protective patina.« less

Augmenting Visual Search Performance with Transcranial Direct Current Stimulation (tDCS)

DTIC Science & Technology

2015-03-01

AFRL-RH-WP-TR-2015-0013 Augmenting Visual Search Performance with transcranial Direct Current Stimulation ( tDCS ) Justin Nelson...Stimulation ( tDCS ) 5a. CONTRACT NUMBER In-House 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) Justin Nelson‡, Dr. R. Andy McKinley...evaluate a form of non-invasive brain stimulation known as transcranial direct current stimulation ( tDCS ) over the left frontal eye field (LFEF) region

Results of the U. S. Geological Survey's analytical evaluation program for standard reference samples distributed in April 2001

USGS Publications Warehouse

Woodworth, M.T.; Connor, B.F.

2001-01-01

This report presents the results of the U.S. Geological Survey's analytical evaluation program for six standard reference samples -- T-165 (trace constituents), M-158 (major constituents), N-69 (nutrient constituents), N-70 (nutrient constituents), P-36 (low ionic-strength constituents), and Hg-32 (mercury) -- that were distributed in April 2001 to laboratories enrolled in the U.S. Geological Survey sponsored interlaboratory testing program. Analytical data received from 73 laboratories were evaluated with respect to overall laboratory performance and relative laboratory performance for each analyte in the six reference samples. Results of these evaluations are presented in tabular form. Also presented are tables and graphs summarizing the analytical data provided by each laboratory for each analyte in the six standard reference samples. The most probable value for each analyte was determined using nonparametric statistics.

Results of the U. S. Geological Survey's Analytical Evaluation Program for Standard Reference Samples Distributed in March 2002

USGS Publications Warehouse

Woodworth, M.T.; Conner, B.F.

2002-01-01

This report presents the results of the U.S. Geological Survey's analytical evaluation program for six standard reference samples -- T- 169 (trace constituents), M- 162 (major constituents), N-73 (nutrient constituents), N-74 (nutrient constituents), P-38 (low ionic-strength constituents), and Hg-34 (mercury) -- that were distributed in March 2002 to laboratories enrolled in the U.S. Geological Survey sponsored intedaboratory testing program. Analytical data received from 93 laboratories were evaluated with respect to overall laboratory performance and relative laboratory performance for each analyte in the six reference samples. Results of these evaluations are presented in tabular form. Also presented are tables and graphs summarizing the analytical data provided by each laboratory for each analyte in the six standard reference samples. The most probable value for each analyte was determined using nonparametric statistics.

Results of the U.S. Geological Survey's analytical evaluation program for standard reference samples distributed in September 2002

USGS Publications Warehouse

Woodworth, Mark T.; Connor, Brooke F.

2003-01-01

This report presents the results of the U.S. Geological Survey's analytical evaluation program for six standard reference samples -- T-171 (trace constituents), M-164 (major constituents), N-75 (nutrient constituents), N-76 (nutrient constituents), P-39 (low ionic-strength constituents), and Hg-35 (mercury) -- that were distributed in September 2002 to laboratories enrolled in the U.S. Geological Survey sponsored interlaboratory testing program. Analytical data received from 102 laboratories were evaluated with respect to overall laboratory performance and relative laboratory performance for each analyte in the six reference samples. Results of these evaluations are presented in tabular form. Also presented are tables and graphs summarizing the analytical data provided by each laboratory for each analyte in the six standard reference samples. The most probable value for each analyte was determined using nonparametric statistics.

Results of the U.S. Geological Survey's analytical evaluation program for standard reference samples distributed in September 2001

USGS Publications Warehouse

Woodworth, Mark T.; Connor, Brooke F.

2002-01-01

This report presents the results of the U.S. Geological Survey's analytical evaluation program for six standard reference samples -- T-167 (trace constituents), M-160 (major constituents), N-71 (nutrient constituents), N-72 (nutrient constituents), P-37 (low ionic-strength constituents), and Hg-33 (mercury) -- that were distributed in September 2001 to laboratories enrolled in the U.S. Geological Survey sponsored interlaboratory testing program. Analytical data received from 98 laboratories were evaluated with respect to overall laboratory performance and relative laboratory performance for each analyte in the six reference samples. Results of these evaluations are presented in tabular form. Also presented are tables and graphs summarizing the analytical data provided by each laboratory for each analyte in the six standard reference samples. The most probable value for each analyte was determined using nonparametric statistics.

Results of the U.S. Geological Survey's Analytical Evaluation Program for Standard Reference Samples Distributed in March 2000

USGS Publications Warehouse

Farrar, Jerry W.; Copen, Ashley M.

2000-01-01

This report presents the results of the U.S. Geological Survey's analytical evaluation program for six standard reference samples -- T-161 (trace constituents), M-154 (major constituents), N-65 (nutrient constituents), N-66 nutrient constituents), P-34 (low ionic strength constituents), and Hg-30 (mercury) -- that were distributed in March 2000 to 144 laboratories enrolled in the U.S. Geological Survey sponsored interlaboratory testing program. Analytical data that were received from 132 of the laboratories were evaluated with respect to overall laboratory performance and relative laboratory performance for each analyte in the six reference samples. Results of these evaluations are presented in tabular form. Also presented are tables and graphs summarizing the analytical data provided by each laboratory for each analyte in the six standard reference samples. The most probable value for each analyte was determined using nonparametric statistics.

Results of the U.S. Geological Survey's analytical evaluation program for standard reference samples distributed in October 1999

USGS Publications Warehouse

Farrar, T.W.

2000-01-01

This report presents the results of the U.S. Geological Survey's analytical evaluation program for six standard reference samples -- T-159 (trace constituents), M-152 (major constituents), N-63 (nutrient constituents), N-64 (nutrient constituents), P-33 (low ionic strength constituents), and Hg-29 (mercury) -- that were distributed in October 1999 to 149 laboratories enrolled in the U.S. Geological Survey sponsored interlaboratory testing program. Analytical data that were received from 131 of the laboratories were evaluated with respect to overall laboratory performance and relative laboratory performance for each analyte in the six reference samples. Results of these evaluations are presented in tabular form. Also presented are tables and graphs summarizing the analytical data provided by each laboratory for each analyte in the six standard reference samples. The most probable value for each analyte was determined using nonparametric statistics.

Results of the U.S. Geological Survey's analytical evaluation program for standard reference samples distributed in March 2003

USGS Publications Warehouse

Woodworth, Mark T.; Connor, Brooke F.

2003-01-01

This report presents the results of the U.S. Geological Survey's analytical evaluation program for six standard reference samples -- T-173 (trace constituents), M-166 (major constituents), N-77 (nutrient constituents), N-78 (nutrient constituents), P-40 (low ionic-strength constituents), and Hg-36 (mercury) -- that were distributed in March 2003 to laboratories enrolled in the U.S. Geological Survey sponsored interlaboratory testing program. Analytical data received from 110 laboratories were evaluated with respect to overall laboratory performance and relative laboratory performance for each analyte in the six reference samples. Results of these evaluations are presented in tabular form. Also presented are tables and graphs summarizing the analytical data provided by each laboratory for each analyte in the six standard reference samples. The most probable value for each analyte was determined using nonparametric statistics.

Results of the U. S. Geological Survey's analytical evaluation program for standard reference samples distributed in October 2000

USGS Publications Warehouse

Connor, B.F.; Currier, J.P.; Woodworth, M.T.

2001-01-01

This report presents the results of the U.S. Geological Survey's analytical evaluation program for six standard reference samples -- T-163 (trace constituents), M-156 (major constituents), N-67 (nutrient constituents), N-68 (nutrient constituents), P-35 (low ionic strength constituents), and Hg-31 (mercury) -- that were distributed in October 2000 to 126 laboratories enrolled in the U.S. Geological Survey sponsored interlaboratory testing program. Analytical data that were received from 122 of the laboratories were evaluated with respect to overall laboratory performance and relative laboratory performance for each analyte in the six reference samples. Results of these evaluations are presented in tabular form. Also presented are tables and graphs summarizing the analytical data provided by each laboratory for each analyte in the six standard reference samples. The most probable value for each analyte was determined using nonparametric statistics.

A Study on Segmented Multiple-Step Forming of Doubly Curved Thick Plate by Reconfigurable Multi-Punch Dies

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ko, Young Ho; Han, Myoung Soo; Han, Jong Man

2007-05-17

Doubly curved thick plate forming in shipbuilding industries is currently performed by a thermal forming process, called as Line Heating by using gas flame torches. Due to the empirical manual work of it, the industries are eager for an alternative way to manufacture curved thick plates for ships. It was envisaged in this study to manufacture doubly curved thick plates by the multi-punch die forming. Experiments and finite element analyses were conducted to evaluate the feasibility of the reconfigurable discrete die forming to the thick plates. Single and segmented multiple step forming procedures were considered from both forming efficiency andmore » accuracy. Configuration of the multi-punch dies suitable for the segmented multiple step forming was also explored. As a result, Segmented multiple step forming with matched dies had a limited formability when the objective shapes become complicate, while a unmatched die configuration provided better possibility to manufacture large curved plates for ships.« less

Evaluation of medical research performance – position paper of the Association of the Scientific Medical Societies in Germany (AWMF)

PubMed Central

Herrmann-Lingen, Christoph; Brunner, Edgar; Hildenbrand, Sibylle; Loew, Thomas H.; Raupach, Tobias; Spies, Claudia; Treede, Rolf-Detlef; Vahl, Christian-Friedrich; Wenz, Hans-Jürgen

2014-01-01

Objective: The evaluation of medical research performance is a key prerequisite for the systematic advancement of medical faculties, research foci, academic departments, and individual scientists’ careers. However, it is often based on vaguely defined aims and questionable methods and can thereby lead to unwanted regulatory effects. The current paper aims at defining the position of German academic medicine toward the aims, methods, and consequences of its evaluation. Methods: During the Berlin Forum of the Association of the Scientific Medical Societies in Germany (AWMF) held on 18 October 2013, international experts presented data on methods for evaluating medical research performance. Subsequent discussions among representatives of relevant scientific organizations and within three ad-hoc writing groups led to a first draft of this article. Further discussions within the AWMF Committee for Evaluation of Performance in Research and Teaching and the AWMF Executive Board resulted in the final consented version presented here. Results: The AWMF recommends modifications to the current system of evaluating medical research performance. Evaluations should follow clearly defined and communicated aims and consist of both summative and formative components. Informed peer reviews are valuable but feasible in longer time intervals only. They can be complemented by objective indicators. However, the Journal Impact Factor is not an appropriate measure for evaluating individual publications or their authors. The scientific “impact” rather requires multidimensional evaluation. Indicators of potential relevance in this context may include, e.g., normalized citation rates of scientific publications, other forms of reception by the scientific community and the public, and activities in scientific organizations, research synthesis and science communication. In addition, differentiated recommendations are made for evaluating the acquisition of third-party funds and the promotion of junior scientists. Conclusions: With the explicit recommendations presented in the current position paper, the AWMF suggests enhancements to the practice of evaluating medical research performance by faculties, ministries and research funding organizations. PMID:24971044

Evaluation of medical research performance--position paper of the Association of the Scientific Medical Societies in Germany (AWMF).

PubMed

Herrmann-Lingen, Christoph; Brunner, Edgar; Hildenbrand, Sibylle; Loew, Thomas H; Raupach, Tobias; Spies, Claudia; Treede, Rolf-Detlef; Vahl, Christian-Friedrich; Wenz, Hans-Jürgen

2014-01-01

The evaluation of medical research performance is a key prerequisite for the systematic advancement of medical faculties, research foci, academic departments, and individual scientists' careers. However, it is often based on vaguely defined aims and questionable methods and can thereby lead to unwanted regulatory effects. The current paper aims at defining the position of German academic medicine toward the aims, methods, and consequences of its evaluation. During the Berlin Forum of the Association of the Scientific Medical Societies in Germany (AWMF) held on 18 October 2013, international experts presented data on methods for evaluating medical research performance. Subsequent discussions among representatives of relevant scientific organizations and within three ad-hoc writing groups led to a first draft of this article. Further discussions within the AWMF Committee for Evaluation of Performance in Research and Teaching and the AWMF Executive Board resulted in the final consented version presented here. The AWMF recommends modifications to the current system of evaluating medical research performance. Evaluations should follow clearly defined and communicated aims and consist of both summative and formative components. Informed peer reviews are valuable but feasible in longer time intervals only. They can be complemented by objective indicators. However, the Journal Impact Factor is not an appropriate measure for evaluating individual publications or their authors. The scientific "impact" rather requires multidimensional evaluation. Indicators of potential relevance in this context may include, e.g., normalized citation rates of scientific publications, other forms of reception by the scientific community and the public, and activities in scientific organizations, research synthesis and science communication. In addition, differentiated recommendations are made for evaluating the acquisition of third-party funds and the promotion of junior scientists. With the explicit recommendations presented in the current position paper, the AWMF suggests enhancements to the practice of evaluating medical research performance by faculties, ministries and research funding organizations.

Evaluating Equating Accuracy and Assumptions for Groups that Differ in Performance

ERIC Educational Resources Information Center

Powers, Sonya; Kolen, Michael J.

2014-01-01

Accurate equating results are essential when comparing examinee scores across exam forms. Previous research indicates that equating results may not be accurate when group differences are large. This study compared the equating results of frequency estimation, chained equipercentile, item response theory (IRT) true-score, and IRT observed-score…

Creating Living Forms: Choreography in Bharatanatyam

ERIC Educational Resources Information Center

Banerjee, Suparna

2005-01-01

This paper is a reflection on the process of dance choreography, an assignment for pedagogical evaluation at postgraduate level in an Indian university. It is also a recapitulation and reconstruction of my experiences while undergoing a Master's course in Bharatanatyam (a style of classical dance) in the Centre for Performing Arts (CPA),…

Investigating Psychometric Isomorphism for Traditional and Performance-Based Assessment

ERIC Educational Resources Information Center

Fay, Derek M.; Levy, Roy; Mehta, Vandhana

2018-01-01

A common practice in educational assessment is to construct multiple forms of an assessment that consists of tasks with similar psychometric properties. This study utilizes a Bayesian multilevel item response model and descriptive graphical representations to evaluate the psychometric similarity of variations of the same task. These approaches for…

48 CFR 1852.215-78 - Make or buy program requirements.

Code of Federal Regulations, 2010 CFR

2010-10-01

... SPACE ADMINISTRATION CLAUSES AND FORMS SOLICITATION PROVISIONS AND CONTRACT CLAUSES Texts of Provisions... buy.” The reasons must include the consideration given to the applicable evaluation factors described... perform each work effort and a statement as to whether the existing or proposed new facility is in or near...

Enhanced efficiency fertilizers: Effects on agronomic performance of corn in Iowa

USDA-ARS?s Scientific Manuscript database

Management of N in corn (Zea mays L.) production systems attempts to increase crop yields and minimize environment impact. This study evaluated enhanced efficiency fertilizers (EEFs) compared to their non-EEF forms on grain yield and corn biomass at the beginning of the grain-filling period, leaf ch...

COMPREHENSIVE EVALUATIVE TECHNIQUES FOR THE CHILD WITH A CLEFT PALATE.

ERIC Educational Resources Information Center

BENSEN, JACK F.; WHITE, FRAZER D.

A MULTIDISCIPLINARY APPROACH TO CHILDREN WITH CLEFT PALATES IS DESCRIBED. THE SOUTH FLORIDA CLEFT PALATE CLINIC, REPRESENTING NINE PROFESSIONAL SPECIALTIES, MEETS WEEKLY TO SEE SIX OR SEVEN CASES. SPEECH PERFORMANCE IS RECORDED ON SIX DIAGNOSTIC, DATA COLLECTING FORMS WHICH PROVIDE A BASIS FOR RECORDING CLINICAL JUDGMENTS. PROGNOSIS AND…

Organizational Communication Competence: The Development of an Industrial Simulation to Teach Adaptive Skills.

ERIC Educational Resources Information Center

Goodall, H. Lloyd, Jr.

1982-01-01

Examines the idea of organizational communication competence and describes how behavioral, cognitive, and performance objectives can be developed for a simulation course. Explains how the course works using small groups, organizational problems, and problem-solving discussions. Includes a sample syllabus with evaluation forms, a discussion of…

Module performance and failure analysis area: Flat-plate solar array project

NASA Technical Reports Server (NTRS)

Tornstrom, E.

1984-01-01

A redesign of the initial (Group I) Mobile Solar Block V module was done and documented. Manufacturing experience and accelerated test data from Group I formed the basis for the redesign. Ten Block V Group II modules were submitted for evaluation and the results are presented.

Techniques for obtaining subjective response to vertical vibration

NASA Technical Reports Server (NTRS)

Clarke, M. J.; Oborne, D. J.

1975-01-01

Laboratory experiments were performed to validate the techniques used for obtaining ratings in the field surveys carried out by the University College of Swansea. In addition, attempts were made to evaluate the basic form of the human response to vibration. Some of the results obtained by different methods are described.

Assessing Meritorious Teacher Performance: A Differential Validity Study.

ERIC Educational Resources Information Center

Ellett, Chad D; Capie, William

The Teacher Assessment and Development System (TADS) - Meritorious Teacher Program (MTP) FORM instrument is used in the Dade County Public Schools, Miami, Florida, to evaluate teachers. Its validity for decisions concerning merit pay for master teachers was examined in this study. Specifically, its ability to discriminate between high performing…

An evaluation of TRAC-PF1/MOD1 computer code performance during posttest simulations of Semiscale MOD-2C feedwater line break transients

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hall, D.G.: Watkins, J.C.

This report documents an evaluation of the TRAC-PF1/MOD1 reactor safety analysis computer code during computer simulations of feedwater line break transients. The experimental data base for the evaluation included the results of three bottom feedwater line break tests performed in the Semiscale Mod-2C test facility. The tests modeled 14.3% (S-FS-7), 50% (S-FS-11), and 100% (S-FS-6B) breaks. The test facility and the TRAC-PF1/MOD1 model used in the calculations are described. Evaluations of the accuracy of the calculations are presented in the form of comparisons of measured and calculated histories of selected parameters associated with the primary and secondary systems. In additionmore » to evaluating the accuracy of the code calculations, the computational performance of the code during the simulations was assessed. A conclusion was reached that the code is capable of making feedwater line break transient calculations efficiently, but there is room for significant improvements in the simulations that were performed. Recommendations are made for follow-on investigations to determine how to improve future feedwater line break calculations and for code improvements to make the code easier to use.« less

Society for Academic Continuing Medical Education Intervention Guideline Series: Guideline 1, Performance Measurement and Feedback.

PubMed

Van Hoof, Thomas J; Grant, Rachel E; Miller, Nicole E; Bell, Mary; Campbell, Craig; Colburn, Lois; Davis, David; Dorman, Todd; Horsley, Tanya; Jacobs-Halsey, Virginia; Kane, Gabrielle; LeBlanc, Constance; Lockyer, Jocelyn; Moore, Donald E; Morrow, Robert; Olson, Curtis A; Silver, Ivan; Thomas, David C; Kitto, Simon

2015-01-01

The Society for Academic Continuing Medical Education commissioned a study to clarify and, if possible, to standardize the terminology for a set of important educational interventions. In the form of a guideline, this article describes one such intervention, performance measurement and feedback, which is a common intervention in health professions education. In the form of a summary report, performance measurement and feedback is an opportunity for clinicians to view data about the care they provide compared with some standard and often with peer and benchmark comparisons. Based on a review of recent evidence and a facilitated discussion with the US and Canadian experts, we describe proper terminology for performance measurement and feedback and other important information about the intervention. We encourage leaders and researchers to consider and build on this guideline as they plan, implement, evaluate, and report efforts with performance measurement and feedback. Clear and consistent use of terminology is imperative, along with complete and accurate descriptions of interventions, to improve the use and study of performance measurement and feedback.

In silico prediction of potential chemical reactions mediated by human enzymes.

PubMed

Yu, Myeong-Sang; Lee, Hyang-Mi; Park, Aaron; Park, Chungoo; Ceong, Hyithaek; Rhee, Ki-Hyeong; Na, Dokyun

2018-06-13

Administered drugs are often converted into an ineffective or activated form by enzymes in our body. Conventional in silico prediction approaches focused on therapeutically important enzymes such as CYP450. However, there are more than thousands of different cellular enzymes that potentially convert administered drug into other forms. We developed an in silico model to predict which of human enzymes including metabolic enzymes as well as CYP450 family can catalyze a given chemical compound. The prediction is based on the chemical and physical similarity between known enzyme substrates and a query chemical compound. Our in silico model was developed using multiple linear regression and the model showed high performance (AUC = 0.896) despite of the large number of enzymes. When evaluated on a test dataset, it also showed significantly high performance (AUC = 0.746). Interestingly, evaluation with literature data showed that our model can be used to predict not only enzymatic reactions but also drug conversion and enzyme inhibition. Our model was able to predict enzymatic reactions of a query molecule with a high accuracy. This may foster to discover new metabolic routes and to accelerate the computational development of drug candidates by enabling the prediction of the potential conversion of administered drugs into active or inactive forms.

Worthwhile optical method for free-form mirrors qualification

NASA Astrophysics Data System (ADS)

Sironi, G.; Canestrari, R.; Toso, G.; Pareschi, G.

2013-09-01

We present an optical method for free-form mirrors qualification developed by the Italian National Institute for Astrophysics (INAF) in the context of the ASTRI (Astrofisica con Specchi a Tecnologia Replicante Italiana) Project which includes, among its items, the design, development and installation of a dual-mirror telescope prototype for the Cherenkov Telescope Array (CTA) observatory. The primary mirror panels of the telescope prototype are free-form concave mirrors with few microns accuracy required on the shape error. The developed technique is based on the synergy between a Ronchi-like optical test performed on the reflecting surface and the image, obtained by means of the TraceIT ray-tracing proprietary code, a perfect optics should generate in the same configuration. This deflectometry test allows the reconstruction of the slope error map that the TraceIT code can process to evaluate the measured mirror optical performance at the telescope focus. The advantages of the proposed method is that it substitutes the use of 3D coordinates measuring machine reducing production time and costs and offering the possibility to evaluate on-site the mirror image quality at the focus. In this paper we report the measuring concept and compare the obtained results to the similar ones obtained processing the shape error acquired by means of a 3D coordinates measuring machine.

CO2 laser ranging systems study

NASA Technical Reports Server (NTRS)

Filippi, C. A.

1975-01-01

The conceptual design and error performance of a CO2 laser ranging system are analyzed. Ranging signal and subsystem processing alternatives are identified, and their comprehensive evaluation yields preferred candidate solutions which are analyzed to derive range and range rate error contributions. The performance results are presented in the form of extensive tables and figures which identify the ranging accuracy compromises as a function of the key system design parameters and subsystem performance indexes. The ranging errors obtained are noted to be within the high accuracy requirements of existing NASA/GSFC missions with a proper system design.

Studies of the Effects of Control Bandwidth and Dark-Hole Size on the HCIT Contrast Performance

NASA Technical Reports Server (NTRS)

Sidick, Erkin; Shaklan, Stuart; Balasubramanian, Kunjithapatha; Cady, Eric

2015-01-01

We have carried out both theoretical and experimental studies of the sensitivity of dark hole contrast to the control bandwidth and dark-hole dimensions in high-contrast broadband stellar coronagraphy. We have evaluated the performance of DM actuator solutions in the presence of occulting mask defects using one to five 2% -wide bands spanning a 10% bandpass. We have also investigated the dependence of the HCIT contrast performance on the size of dark -hole area including large dark holes formed at the Nyquist limit of the DM.

Studies of the effects of control bandwidth and dark-hole size on the HCIT contrast performance

NASA Astrophysics Data System (ADS)

Sidick, Erkin; Shaklan, Stuart; Balasubramanian, Kunjithapatham; Cady, Eric

2015-09-01

We have carried out both theoretical and experimental studies of the sensitivity of dark hole contrast to the control bandwidth and dark-hole dimensions in high-contrast broadband stellar coronagraphy. We have evaluated the performance of DM actuator solutions in the presence of occulting mask defects using one to five 2%-wide bands spanning a 10% bandpass. We have also investigated the dependence of the HCIT contrast performance on the size of dark-hole area including large dark holes formed at the Nyquist limit of the DM.

Research of aluminum alloys with using eddy-current transducers on the basis of cores of various form

NASA Astrophysics Data System (ADS)

Dmitriev, S. F.; Ishkov, A. V.; Katasonov, A. O.; Malikov, V. N.; Sagalakov, A. M.

2018-01-01

The research aims to develop a microminiature eddy current transducer for aluminum alloys. The research topic is considered relevant due to the need for evaluation and forecasting of safe operating life of aluminum. A microminiature transformer-type transducer was designed, which enables to perform local investigations of unferromagnetic materials using eddy-current method based on local studies conductivity. Having the designed transducer as a basis, a hardware-software complex was built to perform experimental studies of aluminium. Cores with different shapes were used in this work. Test results are reported for a flaws in the form of hidden slits and apertures inside the slabs is derived for excitation coil frequencies of 300-700 Hz.

Performance evaluation of a modular detector unit for X-ray computed tomography.

PubMed

Guo, Zhe; Tang, Zhiwei; Wang, Xinzeng; Deng, Mingliang; Hu, Guangshu; Zhang, Hui

2013-04-18

A research prototype CT scanner is currently under development in our lab. One of the key components in this project is the CT detector. This paper describes the design and performance evaluation of the modular CT detector unit for our proposed scanner. It consists of a Photodiode Array Assembly which captures irradiating X-ray photons and converts the energy into electrical current, and a mini Data Acquisition System which performs current integration and converts the analog signal into digital samples. The detector unit can be easily tiled together to form a CT detector. Experiments were conducted to characterize the detector performance both at the single unit level and system level. The noise level, linearity and uniformity of the proposed detector unit were reported and initial imaging studies were also presented which demonstrated the potential application of the proposed detector unit in actual CT scanners.

Sodium-sulfur technology evaluation at Argonne National Laboratory

NASA Astrophysics Data System (ADS)

Mulcahey, T. P.; Tummillo, A. F.; Hogrefe, R. L.; Christianson, C. C.; Biwer, R.; Webster, C. E.; Lee, J.; Miller, J. F.; Marr, J. J.; Smaga, J. A.

The Analysis and Diagnostics Laboratory (ADL) at Argonne National Laboratory has completed evaluation of the Ford Aerospace and Communication Corp. (FACC) technology in the form of four load-levelling (LL) cells, five electric vehicle (EV) cells, and a sub-battery of 89 series connected EV cells. The ADL also has initiated evaluation of the Chloride Silent Power Limited (CSPL) sodium-sulfur (PB) battery technology in the form of 8 individual cells. The evaluation of the FACC-LL cells consisted of an abbreviated performance characterization followed by life-cycle tests on two individual cells and life-cycle tests only on the two other individual cells. The evaluation indicated that the technology was improving, but long-term (life) reliability was not yet adequate for utility applications. The cells exhibited individual cycle lives ranging from 659 to over 1366 cycles, which is equivalent to 2 1/2 to 5 1/2 years in utility use. It was also found that full-cell capacity could only be maintained by applying a special charge regime, regularly or periodically, that consisted of a constant-current followed by a constant-voltage.

Mesh-Sequenced Realizations for Evaluation of Subgrid-Scale Models for Turbulent Combustion (Short Term Innovative Research Program)

DTIC Science & Technology

2018-02-15

conservation equations. The closure problem hinges on the evaluation of the filtered chemical production rates. In MRA/MSR, simultaneous large-eddy...simulations of a reactive flow are performed at different mesh resolution levels. The solutions at each coarser mesh level are constrained by the filtered ...include the replacement of chemical production rates with those filtered from the underlying fine mesh and the construction of ‘exact’ forms for

[Evaluation of the clinical efficacy of a new composition of tizol with triamcinolon in complex treatment of patients with erosive ulcerous form of lichen planus of the oral mucosa].

PubMed

Ron', G I; Akmalova, G M; Emel'yanova, I V

2015-01-01

The most significant of the primary stages of complex therapy of oral lichen planus (OLP), among causal and pathogenetic therapy is a local conservative treatment. The aim of the study was to evaluate the clinical efficacy of the local use of the new compositions TIZOL with triamcinolon in complex therapy of erosive-ulcerous forms OLP oral mucosa. The study was performed with 47 patients with lichen planus in age from 24 to 70 years with erosive-ulcerous form OLP whose diagnosis was confirmed histologically. The first group included 25 patients in the complex treatment of locally applied composition TIZOL with triamcinolon. The second group of 22 people, who in the complex treatment applied locally 0.5% prednisone ointment. The high efficiency of topical TIZOL with a highly topical steroid in the complex therapy of erosive-ulcerous forms OLP, which was confirmed by the positive clinical dynamics in all patients (100%) and high self-esteem of patients (84% positive ratings), reduced life complete epithelialization of erosions.

Informed consent recall and comprehension in orthodontics: traditional vs improved readability and processability methods.

PubMed

Kang, Edith Y; Fields, Henry W; Kiyak, Asuman; Beck, F Michael; Firestone, Allen R

2009-10-01

Low general and health literacy in the United States means informed consent documents are not well understood by most adults. Methods to improve recall and comprehension of informed consent have not been tested in orthodontics. The purposes of this study were to evaluate (1) recall and comprehension among patients and parents by using the American Association of Orthodontists' (AAO) informed consent form and new forms incorporating improved readability and processability; (2) the association between reading ability, anxiety, and sociodemographic variables and recall and comprehension; and (3) how various domains (treatment, risk, and responsibility) of information are affected by the forms. Three treatment groups (30 patient-parent pairs in each) received an orthodontic case presentation and either the AAO form, an improved readability form (MIC), or an improved readability and processability (pairing audio and visual cues) form (MIC + SS). Structured interviews were transcribed and coded to evaluate recall and comprehension. Significant relationships among patient-related variables and recall and comprehension explained little of the variance. The MIC + SS form significantly improved patient recall and parent recall and comprehension. Recall was better than comprehension, and parents performed better than patients. The MIC + SS form significantly improved patient treatment comprehension and risk recall and parent treatment recall and comprehension. Patients and parents both overestimated their understanding of the materials. Improving the readability of consent materials made little difference, but combining improved readability and processability benefited both patients' recall and parents' recall and comprehension compared with the AAO form.

The picture superiority effect: support for the distinctiveness model.

PubMed

Mintzer, M Z; Snodgrass, J G

1999-01-01

The form change paradigm was used to explore the basis for the picture superiority effect. Recognition memory for studied pictures and words was tested in their study form or the alternate form. Form change cost was defined as the difference between recognition performance for same and different form items. Based on the results of Experiment 1 and previous studies, it was difficult to determine the relative cost for studied pictures and words due to a reversal of the mirror effect. We hypothesized that the reversed mirror effect results from subjects' basing their recognition decisions on their assumptions about the study form. Experiments 2 and 3 confirmed this hypothesis and generated a method for evaluating the relative cost for pictures and words despite the reversed mirror effect. More cost was observed for pictures than words, supporting the distinctiveness model of the picture superiority effect.

Metrics, The Measure of Your Future: Materials Evaluation Forms.

ERIC Educational Resources Information Center

Troy, Joan B.

Three evaluation forms are contained in this publication by the Winston-Salem/Forsyth Metric Education Project to be used in conjunction with their materials. They are: (1) Field-Test Materials Evaluation Form; (2) Student Materials Evaluation Form; and (3) Composite Materials Evaluation Form. The questions in these forms are phrased so they can…

Determination of molecular weight of membrane proteins by the use of low-angle laser light scattering combined with high-performance gel chromatography in the presence of a non-ionic surfactant.

PubMed

Maezawa, S; Hayashi, Y; Nakae, T; Ishii, J; Kameyama, K; Takagi, T

1983-09-28

An assessment study was carried out to evaluate the performance of the low-angle laser light scattering technique combined with high-performance gel chromatography in the presence of a nonionic surfactant, octaethyleneglycol n-dodecyl ether, precision differential refractometry and ultraviolet photometry. It was found that the combined technique is highly promising as a method for the determination of the molecular weight of a membrane protein solubilized by the surfactant. For trial, molecular weights of the following membrane proteins of Escherichia coli, both solubilized in oligomeric forms, were measured; porin that forms the transmembrane diffusion pore in the outer membrane, and lambda-receptor protein that facilitates the diffusion of maltose-maltodextrins across the outer membrane. The result obtained indicates that both porin and lambda-receptor protein exist as trimers in the surfactant solution.

ANL/RBC: A computer code for the analysis of Rankine bottoming cycles, including system cost evaluation and off-design performance

NASA Technical Reports Server (NTRS)

Mclennan, G. A.

1986-01-01

This report describes, and is a User's Manual for, a computer code (ANL/RBC) which calculates cycle performance for Rankine bottoming cycles extracting heat from a specified source gas stream. The code calculates cycle power and efficiency and the sizes for the heat exchangers, using tabular input of the properties of the cycle working fluid. An option is provided to calculate the costs of system components from user defined input cost functions. These cost functions may be defined in equation form or by numerical tabular data. A variety of functional forms have been included for these functions and they may be combined to create very general cost functions. An optional calculation mode can be used to determine the off-design performance of a system when operated away from the design-point, using the heat exchanger areas calculated for the design-point.

Grasp posture alters visual processing biases near the hands

PubMed Central

Thomas, Laura E.

2015-01-01

Observers experience biases in visual processing for objects within easy reach of their hands that may assist them in evaluating items that are candidates for action. I investigated the hypothesis that hand postures affording different types of actions differentially bias vision. Across three experiments, participants performed global motion detection and global form perception tasks while their hands were positioned a) near the display in a posture affording a power grasp, b) near the display in a posture affording a precision grasp, or c) in their laps. Although the power grasp posture facilitated performance on the motion task, the precision grasp posture instead facilitated performance on the form task. These results suggest that the visual system weights processing based on an observer’s current affordances for specific actions: fast and forceful power grasps enhance temporal sensitivity, while detail-oriented precision grasps enhance spatial sensitivity. PMID:25862545

Experiences of recruiting to a pilot trial of Cardiac Rehabilitation In patients with Bowel cancer (CRIB) with an embedded process evaluation: lessons learned to improve recruitment.

PubMed

Hubbard, Gill; Campbell, Anna; Davies, Zoe; Munro, Julie; Ireland, Aileen V; Leslie, Stephen; Watson, Angus Jm; Treweek, Shaun

2015-01-01

Recruitment to randomised controlled trials (RCTs) is a perennial problem. Calls have been made for trialists to make recruitment performance publicly available. This article presents our experience of recruiting to a pilot RCT of cardiac rehabilitation for patients with bowel cancer with an embedded process evaluation. Recruitment took place at three UK hospitals. Recruitment figures were based on the following: i) estimated number of patient admissions, ii) number of patients likely to meet inclusion criteria from clinician input and iii) recruitment rates in previous studies. The following recruitment procedure was used:Nurse assessed patients for eligibility.Patients signed a screening form indicating interest in and agreement to be approached by a researcher about the study.An appointment was made at which the patient signed a consent form and was randomised to the intervention or control group. Information about all patients considered for the study and subsequently included or excluded at each stage of the recruitment process and reasons given were recorded. There were variations in the time taken to award Research Management approval to run the study at the three sites (45-359 days). Sixty-two percent of the original recruitment estimate was reached. The main reason for under-recruitment was due to over-estimation of the number of patient admissions; other reasons were i) not assessing all patients for eligibility, ii) not completing a screening form for eligible patients and iii) patients who signed a screening form being lost to the study before consenting and randomisation. Pilot trials should not simply aim to improve recruitment estimates but should also identify factors likely to influence recruitment performance in a future trial and inform the development of that trial's recruitment strategies. Pilot trials are a crucial part of RCT design. Nevertheless, pilot trials are likely to be small scale, involving only a small number of sites, and contextual differences between sites are likely to impact recruitment performance in any future trial. This means that ongoing monitoring and evaluation in trials are likely to be required. ISRCTN63510637; UKCRN id 14092.

Human interaction with robotic systems: performance and workload evaluations.

PubMed

Reinerman-Jones, L; Barber, D J; Szalma, J L; Hancock, P A

2017-10-01

We first tested the effect of differing tactile informational forms (i.e. directional cues vs. static cues vs. dynamic cues) on objective performance and perceived workload in a collaborative human-robot task. A second experiment evaluated the influence of task load and informational message type (i.e. single words vs. grouped phrases) on that same collaborative task. In both experiments, the relationship of personal characteristics (attentional control and spatial ability) to performance and workload was also measured. In addition to objective performance and self-report of cognitive load, we evaluated different physiological responses in each experiment. Results showed a performance-workload association for directional cues, message type and task load. EEG measures however, proved generally insensitive to such task load manipulations. Where significant EEG effects were observed, right hemisphere amplitude differences predominated, although unexpectedly these latter relationships were negative. Although EEG measures were partially associated with performance, they appear to possess limited utility as measures of workload in association with tactile displays. Practitioner Summary: As practitioners look to take advantage of innovative tactile displays in complex operational realms like human-robotic interaction, associated performance effects are mediated by cognitive workload. Despite some patterns of association, reliable reflections of operator state can be difficult to discern and employ as the number, complexity and sophistication of these respective measures themselves increase.

Development and performance evaluation of an MR squeeze-mode damper

NASA Astrophysics Data System (ADS)

Sapiński, Bogdan; Gołdasz, Janusz

2015-11-01

In this paper the authors present results of a magnetorheological (MR) damper prototype development and performance evaluation study. The damper is a device functioning in the so-called squeeze-mode of MR fluid flow regime of operation. By principle, in a squeeze-mode damper the control (working) gap height varies according to the prescribed displacement or force input profile. Such hardware has been claimed to be well suited to small-amplitude vibration damping applications. However, it is still in its infancy. Its potential seems appealing yet unclear. Accordingly, the authors reveal performance figures of the damper complemented by numerical finite-element simulations of the electro-magnetic circuit of the device. The numerical results are presented in the form of maps of averaged magnetic flux density versus coil current and gap height as well as magnetic flux, inductance, and cogging force calculations, respectively. The simulated data are followed by experimental evaluation of the damper performance incorporating plots of force versus piston displacement (velocity) across a prescribed range of excitation inputs. Moreover, some insight into transient (unsteady) characteristics of the device is provided through testing results involving transient currents.

PSF and MTF comparison of two different surface ablation techniques for laser visual correction

NASA Astrophysics Data System (ADS)

Cruz Félix, Angel Sinue; López Olazagasti, Estela; Rosales, Marco A.; Ibarra, Jorge; Tepichín Rodríguez, Eduardo

2009-08-01

It is well known that the Zernike expansion of the wavefront aberrations has been extensively used to evaluate the performance of image forming optical systems. Recently, these techniques were adopted in the field of Ophthalmology to evaluate the objective performance of the human ocular system. We have been working in the characterization and evaluation of the performance of normal human eyes; i.e., eyes which do not require any refractive correction (20/20 visual acuity). These data provide us a reference model to analyze Pre- and Post-Operated results from eyes that have been subjected to laser refractive surgery. Two different ablation techniques are analyzed in this work. These techniques were designed to correct the typical refractive errors known as myopia, hyperopia, and presbyopia. When applied to the corneal surface, these techniques provide a focal shift and, in principle, an improvement of the visual performance. These features can be suitably described in terms of the PSF and MTF of the corresponding Pre- and Post-Operated wavefront aberrations. We show the preliminary results of our comparison.

Evaluating Mediated Perception of Narrative Health Messages: The Perception of Narrative Performance Scale

PubMed Central

Lee, Jeong Kyu; Hecht, Michael L.; Miller-Day, Michelle; Elek, Elvira

2011-01-01

Narrative media health messages have proven effective in preventing adolescents’ substance use but as yet few measures exist to assess perceptions of them. Without such a measure it is difficult to evaluate the role these messages play in health promotion or to differentiate them from other message forms. In response to this need, a study was conducted to evaluate the Perception of Narrative Performance Scale that assesses perceptions of narrative health messages. A sample of 1185 fifth graders in public schools at Phoenix, Arizona completed a questionnaire rating of two videos presenting narrative substance use prevention messages. Confirmatory factor analyses were computed to identify the factor structure of the scale. Consistent with prior studies, results suggest a 3 factor structure for the Perception of Narrative Performance Scale: interest, realism, and identification (with characters). In addition, a path analysis was performed to test the predictive power of the scale. The analysis shows that the scale proves useful in predicting intent to use substances. Finally, practical implications and limitations are discussed. PMID:21822459

FPGA Based Reconfigurable ATM Switch Test Bed

NASA Technical Reports Server (NTRS)

Chu, Pong P.; Jones, Robert E.

1998-01-01

Various issues associated with "FPGA Based Reconfigurable ATM Switch Test Bed" are presented in viewgraph form. Specific topics include: 1) Network performance evaluation; 2) traditional approaches; 3) software simulation; 4) hardware emulation; 5) test bed highlights; 6) design environment; 7) test bed architecture; 8) abstract sheared-memory switch; 9) detailed switch diagram; 10) traffic generator; 11) data collection circuit and user interface; 12) initial results; and 13) the following conclusions: Advances in FPGA make hardware emulation feasible for performance evaluation, hardware emulation can provide several orders of magnitude speed-up over software simulation; due to the complexity of hardware synthesis process, development in emulation is much more difficult than simulation and requires knowledge in both networks and digital design.

Integration of Virtual Machine Technologies into Hastily Formed Networks in Support of Humanitarian Relief and Disaster Recovery Missions

DTIC Science & Technology

2011-12-01

and measures of effectiveness (MOE). New technologies that offer solid-state hard drives built into modular VDI devices known as appliances ...Joint Reconfigurable Vehicle LAN Local Area Network LOS Line of Sight LTE Long Term Evolution MB Megabyte MOP Measure of Performance MOE Measure ...re-usable measures of performance and measures of effectiveness (MOP and MOE) and evaluation procedures will be applied to this research. A

Application of an Artificial Stomach-Duodenum Reduced Gastric pH Dog Model for Formulation Principle Assessment and Mechanistic Performance Understanding.

PubMed

Lee, Chen-Ming; Luner, Paul E; Locke, Karen; Briggs, Katherine

2017-08-01

The objective of this study was to develop an artificial stomach-duodenum (ASD) dissolution model as an in vitro evaluation tool that would simulate the gastrointestinal physiology of gastric pH-reduced dogs as a method to assess formulations for a poorly soluble free acid compound with ng/mL solubility. After establishing the ASD model with well-controlled duodenum pH, 5 formulations each applying different solubilization principles were developed and their performance in the ASD model and in vivo in dogs was evaluated. Excellent correlations were obtained between dog area under the curve (AUC) and ASD AUC of 5 formulations evaluated with simulated intestinal fluid (r 2  = 0.987) and fasted-state simulated intestinal fluid (r 2  = 0.989) as the duodenum dissolution medium, indicating that the approach of infusing NaOH into duodenum compartment to maintain duodenum pH of an ASD worked properly in simulating gastric pH-reduced dog. Raman spectroscopy was used to study drug dissolution kinetics associated with different solubilization principles and the results suggested that the solubilization principles performed as designed. Spectroscopic results also identified that the compound formed a gel during dissolution and hypromellose maintained the drug-gelled state to avoid further solid form conversion. The implication of the compound physical gelation to drug dissolution kinetics and in vivo exposure are discussed. Copyright © 2017 American Pharmacists Association®. Published by Elsevier Inc. All rights reserved.

76 FR 37824 - Agency Information Collection Activities: Submission for OMB Review; Comment Request, OMB No...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-28

...; FEMA Form 078-0-2A, National Fire Academy (NFA) Long-Term Evaluation Student/Trainee; FEMA Form 078-0-2... Evaluation Student/Trainee; FEMA Form 078-0-2 (Presently FEMA Form 95-58), NFA Long-Term Evaluation...-term Evaluation Form for Supervisors and National Fire Academy Long-term Evaluation Form for Students...

Standardization and validation of a parallel form of the verbal and non-verbal recognition memory test in an Italian population sample.

PubMed

Smirni, Daniela; Smirni, Pietro; Di Martino, Giovanni; Cipolotti, Lisa; Oliveri, Massimiliano; Turriziani, Patrizia

2018-05-04

In the neuropsychological assessment of several neurological conditions, recognition memory evaluation is requested. Recognition seems to be more appropriate than recall to study verbal and non-verbal memory, because interferences of psychological and emotional disorders are less relevant in the recognition than they are in recall memory paradigms. In many neurological disorders, longitudinal repeated assessments are needed to monitor the effectiveness of rehabilitation programs or pharmacological treatments on the recovery of memory. In order to contain the practice effect in repeated neuropsychological evaluations, it is necessary the use of parallel forms of the tests. Having two parallel forms of the same test, that kept administration procedures and scoring constant, is a great advantage in both clinical practice, for the monitoring of memory disorder, and in experimental practice, to allow the repeated evaluation of memory on healthy and neurological subjects. First aim of the present study was to provide normative values in an Italian sample (n = 160) for a parallel form of a verbal and non-verbal recognition memory battery. Multiple regression analysis revealed significant effects of age and education on recognition memory performance, whereas sex did not reach a significant probability level. Inferential cutoffs have been determined and equivalent scores computed. Secondly, the study aimed to validate the equivalence of the two parallel forms of the Recognition Memory Test. The correlations analyses between the total scores of the two versions of the test and correlation between the three subtasks revealed that the two forms are parallel and the subtasks are equivalent for difficulty.

Cockpit Adaptive Automation and Pilot Performance

NASA Technical Reports Server (NTRS)

Parasuraman, Raja

2001-01-01

The introduction of high-level automated systems in the aircraft cockpit has provided several benefits, e.g., new capabilities, enhanced operational efficiency, and reduced crew workload. At the same time, conventional 'static' automation has sometimes degraded human operator monitoring performance, increased workload, and reduced situation awareness. Adaptive automation represents an alternative to static automation. In this approach, task allocation between human operators and computer systems is flexible and context-dependent rather than static. Adaptive automation, or adaptive task allocation, is thought to provide for regulation of operator workload and performance, while preserving the benefits of static automation. In previous research we have reported beneficial effects of adaptive automation on the performance of both pilots and non-pilots of flight-related tasks. For adaptive systems to be viable, however, such benefits need to be examined jointly in the context of a single set of tasks. The studies carried out under this project evaluated a systematic method for combining different forms of adaptive automation. A model for effective combination of different forms of adaptive automation, based on matching adaptation to operator workload was proposed and tested. The model was evaluated in studies using IFR-rated pilots flying a general-aviation simulator. Performance, subjective, and physiological (heart rate variability, eye scan-paths) measures of workload were recorded. The studies compared workload-based adaptation to to non-adaptive control conditions and found evidence for systematic benefits of adaptive automation. The research provides an empirical basis for evaluating the effectiveness of adaptive automation in the cockpit. The results contribute to the development of design principles and guidelines for the implementation of adaptive automation in the cockpit, particularly in general aviation, and in other human-machine systems. Project goals were met or exceeded. The results of the research extended knowledge of automation-related performance decrements in pilots and demonstrated the positive effects of adaptive task allocation. In addition, several practical implications for cockpit automation design were drawn from the research conducted. A total of 12 articles deriving from the project were published.

Performance, physiological, and oculometer evaluation of VTOL landing displays

NASA Technical Reports Server (NTRS)

North, R. A.; Stackhouse, S. P.; Graffunder, K.

1979-01-01

A methodological approach to measuring workload was investigated for evaluation of new concepts in VTOL aircraft displays. Physiological, visual response, and conventional flight performance measures were recorded for landing approaches performed in the NASA Visual Motion Simulator (VMS). Three displays (two computer graphic and a conventional flight director), three crosswind amplitudes, and two motion base conditions (fixed vs. moving base) were tested in a factorial design. Multivariate discriminant functions were formed from flight performance and/or visual response variables. The flight performance variable discriminant showed maximum differentation between crosswind conditions. The visual response measure discriminant maximized differences between fixed vs. motion base conditions and experimental displays. Physiological variables were used to attempt to predict the discriminant function values for each subject/condition trial. The weights of the physiological variables in these equations showed agreement with previous studies. High muscle tension, light but irregular breathing patterns, and higher heart rate with low amplitude all produced higher scores on this scale and thus represent higher workload levels.

Proposal of an innovative benchmark for comparison of the performance of contactless digitizers

NASA Astrophysics Data System (ADS)

Iuliano, Luca; Minetola, Paolo; Salmi, Alessandro

2010-10-01

Thanks to the improving performances of 3D optical scanners, in terms of accuracy and repeatability, reverse engineering applications have extended from CAD model design or reconstruction to quality control. Today, contactless digitizing devices constitute a good alternative to coordinate measuring machines (CMMs) for the inspection of certain parts. The German guideline VDI/VDE 2634 is the only reference to evaluate whether 3D optical measuring systems comply with the declared or required performance specifications. Nevertheless it is difficult to compare the performance of different scanners referring to such a guideline. An adequate novel benchmark is proposed in this paper: focusing on the inspection of production tools (moulds), the innovative test piece was designed using common geometries and free-form surfaces. The reference part is intended to be employed for the evaluation of the performance of several contactless digitizing devices in computer-aided inspection, considering dimensional and geometrical tolerances as well as other quantitative and qualitative criteria.

Manganese recycling in the United States in 1998

USGS Publications Warehouse

Jones, Thomas S.

2003-01-01

This report presents the results of the U.S. Geological Survey's analytical evaluation program for six standard reference samples -- T-163 (trace constituents), M-156 (major constituents), N-67 (nutrient constituents), N-68 (nutrient constituents), P-35 (low ionic strength constituents), and Hg-31 (mercury) -- that were distributed in October 2000 to 126 laboratories enrolled in the U.S. Geological Survey sponsored interlaboratory testing program. Analytical data that were received from 122 of the laboratories were evaluated with respect to overall laboratory performance and relative laboratory performance for each analyte in the six reference samples. Results of these evaluations are presented in tabular form. Also presented are tables and graphs summarizing the analytical data provided by each laboratory for each analyte in the six standard reference samples. The most probable value for each analyte was determined using nonparametric statistics.

Radiographic and Histologic Evaluation of a Bone Void that Formed After Recombinant Human Bone Morphogenetic Protein-2-Mediated Sinus Graft Augmentation: A Case Report.

PubMed

Kang, Hyun-Joo; Jun, Choong-Man; Yun, Jeong-Ho

2016-01-01

In the present case report, the authors describe radiographic and histologic observations of a bone void that formed after a sinus augmentation using a graft material that contained recombinant human bone morphogenetic protein-2 (rhBMP-2) and discuss clinical and histologic implications of their findings. Sinus augmentation was performed using a graft material comprising 1 g of hydroxyapatite/β-tricalcium phosphate, which contained 1 mg of rhBMP-2. Radiographic evaluation was conducted with panoramic radiographs and computed tomography images of the augmented maxillary sinus, which were analyzed using a three-dimensional image-reconstruction program. Histologic evaluation was also performed on a biopsy specimen obtained 6 months after the sinus augmentation. The total augmented volume increased from 1,582.2 mm(3) immediately after the sinus augmentation to 3,344.9 mm3 at 6 months after the augmentation because of the formation of a bone void. Twenty-six months after the sinus augmentation, the bone void remained but had reduced in volume, with the total augmented volume reduced to 2,551.7 mm(3). Histologically, new bone was observed to be in contact with the grafted particles, and a fatty marrow-like tissue was present in the area of the bone void. This case report shows that the bone void that had formed after sinus augmentation resolved over time and seemed to be partially replaced with new bone. Furthermore, none of the implants failed, and clinical adverse events were not observed during the follow-up period.

Working Memory Training in the Form of Structured Games in Children with Attention Deficit Hyperactivity Disorder

PubMed Central

Khalili Kermani, Fatemeh; Mohammadi, Mohammad Reza; Yadegari, Fariba; Haresabadi, Fatemeh; Sadeghi, Seyed Mehdi

2016-01-01

Objective: In this study, a new training method of working memory (WM) was used in the form of structured games, and the effect of training was evaluated with a controlled design. The training method of WM in the form of structured games includes 20 sets of structured games that can improve WM and performance of executive functions. Method: Sixty children with attention deficit hyperactivity disorder (ADHD) aged 8.5 to 11.2 years (35 boys), using no stimulant medication were selected. We randomly assigned 30 participants to the experimental group and provided them with WM training. The training was in the form of structured games and was offered to the participants in two 60-minute sessions weekly for 12 weeks. Other participants were assigned to the control group, receiving no treatment. All the participants were also evaluated at follow-up 6 months later. The main measures were the Child Behavior Checklist (CBCL), the Digit Span and Symbol Search B subscale of the Wechsler Intelligence Scale for Children (WISC-IV); and scores of dictation and mathematics were used in terms of pre and post-test. Results: The results of the t-test revealed a significant improvement in the post-test measures as well as a significant reduction of parents’ reports of inattentiveness, and improvement in academic performance in the experimental group. However, no significant changes were found in the control group. Conclusion: The academic and working memory improvements were primarily due to the training method of WM. Our findings suggest that the training method of WM in the form of structured games may be a practical method for treating children with ADHD, but it needs to be further investigated. PMID:28050182

Working Memory Training in the Form of Structured Games in Children with Attention Deficit Hyperactivity Disorder.

PubMed

Khalili Kermani, Fatemeh; Mohammadi, Mohammad Reza; Yadegari, Fariba; Haresabadi, Fatemeh; Sadeghi, Seyed Mehdi

2016-10-01

Objective: In this study, a new training method of working memory (WM) was used in the form of structured games, and the effect of training was evaluated with a controlled design. The training method of WM in the form of structured games includes 20 sets of structured games that can improve WM and performance of executive functions. Method: Sixty children with attention deficit hyperactivity disorder (ADHD) aged 8.5 to 11.2 years (35 boys), using no stimulant medication were selected. We randomly assigned 30 participants to the experimental group and provided them with WM training. The training was in the form of structured games and was offered to the participants in two 60-minute sessions weekly for 12 weeks. Other participants were assigned to the control group, receiving no treatment. All the participants were also evaluated at follow-up 6 months later. The main measures were the Child Behavior Checklist (CBCL), the Digit Span and Symbol Search B subscale of the Wechsler Intelligence Scale for Children (WISC-IV); and scores of dictation and mathematics were used in terms of pre and post-test. Results: The results of the t-test revealed a significant improvement in the post-test measures as well as a significant reduction of parents' reports of inattentiveness, and improvement in academic performance in the experimental group. However, no significant changes were found in the control group. Conclusion : The academic and working memory improvements were primarily due to the training method of WM. Our findings suggest that the training method of WM in the form of structured games may be a practical method for treating children with ADHD, but it needs to be further investigated.

The advancement of a new human factors report--'The Unique Report'--facilitating flight crew auditing of performance/operations as part of an airline's safety management system.

PubMed

Leva, M C; Cahill, J; Kay, A M; Losa, G; McDonald, N

2010-02-01

This paper presents the findings of research relating to the specification of a new human factors report, conducted as part of the work requirements for the Human Integration into the Lifecycle of Aviation Systems project, sponsored by the European Commission. Specifically, it describes the proposed concept for a unique report, which will form the basis for all operational and safety reports completed by flight crew. This includes all mandatory and optional reports. Critically, this form is central to the advancement of improved processes and technology tools, supporting airline performance management, safety management, organisational learning and knowledge integration/information-sharing activities. Specifically, this paper describes the background to the development of this reporting form, the logic and contents of this form and how reporting data will be made use of by airline personnel. This includes a description of the proposed intelligent planning process and the associated intelligent flight plan concept, which makes use of airline operational and safety analyses information. Primarily, this new reporting form has been developed in collaboration with a major Spanish airline. In addition, it has involved research with five other airlines. Overall, this has involved extensive field research, collaborative prototyping and evaluation of new reports/flight plan concepts and a number of evaluation activities. Participants have included both operational and management personnel, across different airline flight operations processes. Statement of Relevance: This paper presents the development of a reporting concept outlined through field research and collaborative prototyping within an airline. The resulting reporting function, embedded in the journey log compiled at the end of each flight, aims at enabling employees to audit the operations of the company they work for.

Developing a music programme for preschool children with cochlear implants.

PubMed

Koşaner, Julie; Kilinc, Aynur; Deniz, Murat

2012-11-01

Although music perception is especially challenging for cochlear implant (CI) users, young CI users' musical perception abilities are improved by participation in structured musical activities. To design, implement, evaluate, and publish a music training programme with a monitoring tool for preschool CI users, for use in family-centred habilitation programmes. We devised a programme of musical activities, Musical EARS®, and a curriculum-related hierarchical Evaluation Form to represent performance. The programme included sections on singing; recognizing songs, tunes, and timbre; and responding appropriately to music and rhythm. It was implemented over 18 months at Ilkses Rehabilitation Centre, with 25 paediatric MED-EL CI users split into three groups of varying age, duration of CI use, and ability. Mean total scores increased significantly for all groups. Scores increased unevenly across subscales. Participation in and enjoyment of musical activities increased for both children and parents. Significant correlations were found between scores and length of CI use. The training programme effectively enriches child CI users' musical experience. To varying degrees, children learned to perform the Musical EARS® activities. The study allowed us to validate the lesson content and the hierarchical nature of the Evaluation Form. We conclude that prelingually deafened CI users should be systematically involved in musical activities to help them acquire skills acquired more easily by hearing peers.

Performance evaluation of intensive, pond-based culture systems for catfish production in Mississippi: year one

USDA-ARS?s Scientific Manuscript database

Catfish farming is the leading form of aquaculture in the U.S. and has a significant economic impact in the southern states. Increased feed and energy costs, and competition from foreign imports have recently caused catfish farmers to intensify production as a means of improving efficiency and profi...

40 CFR Appendix A to Subpart Wwww... - Test Method for Determining Vapor Suppressant Effectiveness

Code of Federal Regulations, 2011 CFR

2011-07-01

... test for emissions determination. This test is designed to evaluate the performance of film forming... production. This comparative test quantifies the loss of volatiles from a fiberglass reinforced laminate...-suppressed resins. 11.5Data Acceptance Criteria: 11.5.1A test set is designed as twelve individual test runs...

40 CFR Appendix A to Subpart Wwww... - Test Method for Determining Vapor Suppressant Effectiveness

Code of Federal Regulations, 2010 CFR

2010-07-01

... test for emissions determination. This test is designed to evaluate the performance of film forming... production. This comparative test quantifies the loss of volatiles from a fiberglass reinforced laminate...-suppressed resins. 11.5Data Acceptance Criteria: 11.5.1A test set is designed as twelve individual test runs...

Explaining Crossing DIF in Polytomous Items Using Differential Step Functioning Effects

ERIC Educational Resources Information Center

Penfield, Randall D.

2010-01-01

Crossing, or intersecting, differential item functioning (DIF) is a form of nonuniform DIF that exists when the sign of the between-group difference in expected item performance changes across the latent trait continuum. The presence of crossing DIF presents a problem for many statistics developed for evaluating DIF because positive and negative…

75 FR 11910 - Justice Management Division; Office of Attorney Recruitment and Management; Agency Information...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-12

... comments should address one or more of the following four points: (1) Evaluate whether the proposed... of these forms seek information in order to prepare both the official Travel Authorizations prior to the interviewees' performing pre-employment interview travel (as defined by 41 CFR 301-1.3), and the...

Evaluating the Relationship between Naturalistic Content Acquisition Podcast Views and Course Performance

ERIC Educational Resources Information Center

Kennedy, Michael J.; Alves, Kat D.; Miciak, Jeremy; Romig, John; Mathews, Hannah Morris; Thomas, Cathy Newman

2016-01-01

Content Acquisition Podcasts for Teachers (CAP-T) are a form of multimedia-based instruction that are supported by an empirical record of effectiveness and are grounded in Mayer's cognitive theory of multimedia learning and accompanying instructional design principles. In this study, 162 students enrolled in an introductory course in special…

Interagency Transition Team Development and Facilitation. Essential Tools.

ERIC Educational Resources Information Center

Stodden, Robert A.; Brown, Steven E.; Galloway, L. M.; Mrazek, Susan; Noy, Liora

2005-01-01

The purpose of this Essential Tool is to assist state-level transition coordinators and others responsible for forming, conducting, and evaluating the performance of interagency transition teams that are focused upon the school and post-school needs of youth with disabilities. This Essential Tool is designed to guide the coordination efforts of…

Schools of the Marketplace: A New Generation of American Schools.

ERIC Educational Resources Information Center

Meinhard, Richard

This design proposal for "Schools of the Marketplace" describes a system that does not rely on government bureaucracy to operate. Instead, it allows parents and students to choose their teachers, evaluates student performance more on results of projects and papers than on standardized tests, empowers teachers to form professional groups…

A Program for Neurological Organization.

ERIC Educational Resources Information Center

Bowers, Louis

A program for neurological organization is explained and its purposes are stated. Hints are given for working with both child and parents; and form for evaluating measures of neuromotor fitness is included. Also provided is a checklist for rating motor exploration, including movements performed lying on the back, on the knees, or standing or on…

Navigating sticky areas in transdermal product development.

PubMed

Strasinger, Caroline; Raney, Sam G; Tran, Doanh C; Ghosh, Priyanka; Newman, Bryan; Bashaw, Edward D; Ghosh, Tapash; Shukla, Chinmay G

2016-07-10

The benefits of transdermal delivery over the oral route to combat such issues of low bioavailability and limited controlled release opportunities are well known and have been previously discussed by many in the field (Prausnitz et al. (2004) [1]; Hadgraft and Lane (2006) [2]). However, significant challenges faced by developers as a product moves from the purely theoretical to commercial production have hampered full capitalization of the dosage forms vast benefits. While different technical aspects of transdermal system development have been discussed at various industry meetings and scientific workshops, uncertainties have persisted regarding the pharmaceutical industry's conventionally accepted approach for the development and manufacturing of transdermal systems. This review provides an overview of the challenges frequently faced and the industry's best practices for assuring the quality and performance of transdermal delivery systems and topical patches (collectively, TDS). The topics discussed are broadly divided into the evaluation of product quality and the evaluation of product performance; with the overall goal of the discussion to improve, advance and accelerate commercial development in the area of this complex controlled release dosage form. Published by Elsevier B.V.

Evaluation of Subsequent Heat Treatment Routes for Near-β Forged TA15 Ti-Alloy

PubMed Central

Sun, Zhichao; Wu, Huili; Yang, He

2016-01-01

TA15 Ti-alloy is widely used to form key load-bearing components in the aerospace field, where excellent service performance is needed. Near-β forging technology provides an attractive way to form these complicated Ti-alloy components but subsequent heat treatment has a great impact on the final microstructure and mechanical properties. Therefore evaluation and determination of the heat treatment route is of particular significance. In this paper, for the near-β forged TA15 alloy, the formation and evolution of microstructures under different subsequent heat treatment routes (annealing, solution and aging, toughening and strengthening) were studied and the cooling mode after forging was also considered. Then, the type and characteristics of the obtained microstructures were discussed through quantitative metallographic analysis. The corresponding mechanical properties (tensile, impact toughness, and fracture toughness) and effects of microstructural characteristics were investigated. Finally, for a required microstructure and performance a reasonable heat treatment route was recommended. The work is of importance for the application and development of near-β forging technology. PMID:28773994

Evaluation of kinesthetic-tactual displays using a critical tracking task

NASA Technical Reports Server (NTRS)

Jagacinski, R. J.; Miller, D. P.; Gilson, R. D.; Ault, R. T.

1977-01-01

The study sought to investigate the feasibility of applying the critical tracking task paradigm to the evaluation of kinesthetic-tactual displays. Four subjects attempted to control a first-order unstable system with a continuously decreasing time constant by using either visual or tactual unidimensional displays. Display aiding was introduced in both modalities in the form of velocity quickening. Visual tracking performance was better than tactual tracking, and velocity aiding improved the critical tracking scores for visual and tactual tracking about equally. The results suggest that the critical task methodology holds considerable promise for evaluating kinesthetic-tactual displays.

[Discussion to the advanced application of scripting in RayStation TPS system].

PubMed

Zhang, Jianying; Sun, Jing; Wang, Yun

2014-11-01

In this study, the implementation methods for the several functions are explored on RayStation 4.0 Platform. Those functions are passing the information such as ROI names to a plan prescription Word file. passing the file to RayStation for plan evaluation; passing the evaluation result to form an evaluated report file. The result shows the RayStation scripts can exchange data with Word, as well as control the running of Word and the content of a Word file. Consequently, it's feasible for scripts to inactive with third party softwares upgrade the performance of RayStation itself.

An Analysis of the Republic of Korea Army Officer Performance Evaluation System.

DTIC Science & Technology

1986-06-01

Figure 3. 3 Army Form 1-1-28. 5. 43 * 4. .2 ~ 4.4 Leadership Senior P I a nq Senor! Rater Rater Rater Rater Possesese leadership sk ls Loqical and...Act As a basis not to provide the information requested in Part IV, the Support Form will contain the rated officer s statement to that efect and be...ability to anticipate and react correctly to dynazic tactical environment. A NOTEWORTHY MMATU 42. LEADERSHIP /NO ST RENGTH AN kSSETT VT.%AST OCR LT A

Integrated Reconfigurable Aperture, Digital Beam Forming, and Software GPS Receiver for UAV Navigation

DTIC Science & Technology

2007-12-11

Implemented both carrier and code phase tracking loop for performance evaluation of a minimum power beam forming algorithm and null steering algorithm...4 Antennal Antenna2 Antenna K RF RF RF ct, Ct~2 ChKx1 X2 ....... Xk A W ~ ~ =Z, x W ,=1 Fig. 5. Schematics of a K-element antenna array spatial...adaptive processor Antennal Antenna K A N-i V/ ( Vil= .i= VK Fig. 6. Schematics of a K-element antenna array space-time adaptive processor Two additional

Broad source fringe formation with a Fresnel biprism and a Mach-Zehnder interferometer.

PubMed

Leon, S C

1987-12-15

A biprism is used to combine identical spatially incoherent wavefronts that have been split by an amplitude splitting interferometer such as the Mach-Zehnder. The performance of this composite interferometer is evaluated by tracing the chief ray through parallel optical systems using Snell's law and trigonometry. Fringes formed in spatially incoherent light with this optical system are compared with those formed using the Mach-Zehnder and grating interferometers. It is shown that the combination can exhibit extended source fringe formation capability greatly exceeding that of the Mach-Zehnder interferometer.

Synthesis, Characterization, and Biological Evaluation of certain 6-methyl-2(3H)-benzo-1, 3-thiazolyl-1'-ethylidene-2-(o, p- Substituted Acetophenones) Hydrazine Analogs.

PubMed

Alang, G; Kaur, G; Kaur, R; Singh, A; Tiwari, R

2010-10-01

In the present study, five new derivatives (GG4 to GG8) of benzothiazoles were synthesized and evaluated against Staphylococcus aureus (MTCC 737), Pseudomonas aeruginosa (MTCC 424), Escherichia coli (MTCC 1687), and yeast-like fungi Candida tropicalis. p-Toluidine on treatment with ammonium thiocynate formed 2-benzothiazolamines (II), which on reaction with hydrazine hydrate formed a hydrazino derivative (III). Compounds GG4 to GG8 were synthesized by reacting the hydrazine derivative with different acetophenones. All the synthesized compounds were identified by IR and (1)H-NMR, and antimicrobial activity was performed on the synthesized compounds. Presence of NO(2), Br, OCH(3), and Cl groups to the substituted benzothiazole enhanced the antibacterial and antifungal activities.

Saturn 5 launch vehicle flight evaluation report-AS-511 Apollo 16 mission

NASA Technical Reports Server (NTRS)

1972-01-01

A postflight analysis of the Apollo 16 mission is presented. The basic objective of the flight evaluation is to acquire, reduce, analyze, and report on flight data to the extent required to assure future mission success and vehicle reliability. Actual flight problems are identified, their causes are deet determined, and recommendations are made for corrective actions. Summaries of launch operations and spacecraft performance are included. Significant events for all phases of the flight are provide in tabular form.

Analysis of the flow in a 1-MJ electric-arc shock tunnel

NASA Technical Reports Server (NTRS)

Reller, J. O., Jr.; Reddy, N. M.

1972-01-01

In the electric-arc-heated shock tunnel, the facility performance over a range of shock Mach numbers from 7 to 19 was evaluated. The efficiency of the arc-heated driver is deduced using an improved form of the shock tube equation. A theoretical and experimental analysis is made of the tailored-interface condition. The free stream properties in the test section, with nitrogen as the test gas, are evaluated using a method based on stagnation point, heat transfer measurements.

Evaluating and optimizing the NERSC workload on Knights Landing

DOE Office of Scientific and Technical Information (OSTI.GOV)

Barnes, T; Cook, B; Deslippe, J

2017-01-30

NERSC has partnered with 20 representative application teams to evaluate performance on the Xeon-Phi Knights Landing architecture and develop an application-optimization strategy for the greater NERSC workload on the recently installed Cori system. In this article, we present early case studies and summarized results from a subset of the 20 applications highlighting the impact of important architecture differences between the Xeon-Phi and traditional Xeon processors. We summarize the status of the applications and describe the greater optimization strategy that has formed.

Evaluating and Optimizing the NERSC Workload on Knights Landing

DOE Office of Scientific and Technical Information (OSTI.GOV)

Barnes, Taylor; Cook, Brandon; Doerfler, Douglas

2016-01-01

NERSC has partnered with 20 representative application teams to evaluate performance on the Xeon-Phi Knights Landing architecture and develop an application-optimization strategy for the greater NERSC workload on the recently installed Cori system. In this article, we present early case studies and summarized results from a subset of the 20 applications highlighting the impact of important architecture differences between the Xeon-Phi and traditional Xeon processors. We summarize the status of the applications and describe the greater optimization strategy that has formed.

Save the last dance for me: unwanted serial position effects in jury evaluations.

PubMed

Bruine de Bruin, Wändi

2005-03-01

Whenever competing options are considered in sequence, their evaluations may be affected by order of appearance. Such serial position effects would threaten the fairness of competitions using jury evaluations. Randomization cannot reduce potential order effects, but it does give candidates an equal chance of being assigned to preferred serial positions. Whether, or what, serial position effects emerge may depend on the cognitive demands of the judgment task. In end-of-sequence procedures, final scores are not given until all candidates have performed, possibly burdening judges' memory. If judges' evaluations are based on how well they remember performances, serial position effects may resemble those found with free recall. Candidates may also be evaluated step-by-step, immediately after each performance. This procedure should not burden memory, though it may produce different serial position effects. Yet, this paper reports similar serial position effects with end-of-sequence and step-by-step procedures used for the Eurovision Song Contest: Ratings increased with serial position. The linear order effect was replicated in the step-by-step judgments of World and European Figure Skating Contests. It is proposed that, independent of the evaluation procedure, judges' initial impressions of sequentially appearing candidates may be formed step-by-step, yielding serial position effects.

Relationship between vertical facial patterns and dental arch form in class II malocclusion.

PubMed

Grippaudo, Cristina; Oliva, Bruno; Greco, Anna Lucia; Sferra, Simone; Deli, Roberto

2013-11-07

The purpose of this study is to evaluate the relationship between dental arch form and the vertical facial pattern determined by the angle between the mandibular plane and the anterior cranial base (Sella-nasion/mandibular plane angle (SN-MP)) in skeletal class II untreated patients. A sample of 73 Caucasians patients with untreated skeletal class II in permanent dentition was divided into three groups according to the values of the angle SN-MP. An evaluation of the arch form was performed by angular and linear relation values on each patient. Regression analysis was used to determine the statistical significance of the relationships between SN-MP angle and dental arch form. The differences among the three groups were analyzed for significance using a variance analysis. A decrease of the upper arch transversal diameters in high SN-MP angle patients and an increase in low angle SN-MP ones (P<0.05) were shown. Result analysis showed a change in upper arch shape, with a smaller intercanine width in patients with high SN-MP angle and a greater one in low angle patients. As SN-MP angle increased, the upper arch form tended to be narrower. No statistically significant difference in mandibular arch form among the three groups was found, except the angle value related to incisors position. The results showed the association between the upper dental arch form and the vertical facial pattern. On the contrary, the lower arch form was not related to the mandibular divergence.

Clinical results of Hi-tech Knee II total knee arthroplasty in patients with rheumatoid athritis: 5- to 12-year follow-up.

PubMed

Yamanaka, Hajime; Goto, Ken-ichiro; Suzuki, Munetaka

2012-02-22

Total knee arthroplasty (TKA) is a common form of treatment to relieve pain and improve function in cases of rheumatoid arthritis (RA). Good clinical outcomes have been reported with a variety of TKA prostheses. The cementless Hi-Tech Knee II cruciate-retaining (CR)-type prosthesis, which has 6 fins at the anterior of the femoral component, posterior cruciate ligament (PCL) retention, flat-on-flat surface component geometry, all-polyethylene patella, strong initial fixation by the center screw of the tibial base plate, 10 layers of titanium alloy fiber mesh, and direct compression molded ultra high molecular weight polyethylene (UHMWPE), is appropriate for TKA in the Japanese knee.The present study was performed to evaluate the clinical results of primary TKA in RA using the cementless Hi-Tech Knee II CR-type prosthesis. We performed 32 consecutive primary TKAs using cementless Hi-Tech Knee II CR-type prosthesis in 31 RA patients. The average follow-up period was 8 years 3 months. Clinical evaluations were performed according to the American Knee Society (KS) system, knee score, function score, radiographic evaluation, and complications. The mean postoperative maximum flexion angle was 115.6°, and the KS knee score and function score improved to 88 and 70 after surgery, respectively. Complications, such as infection, occurred in 1 patient and revision surgery was performed. There were no cases of loosening in this cohort, and prosthesis survival rate was 96.9% at 12 years postoperatively. These results suggest that TKA using the cementless Hi-Tech Knee II CR-type prosthesis is a very effective form of treatment in RA patients at 5 to 12 years postoperatively. Further long-term follow-up studies are required to determine the ultimate utility of this type of prosthesis.

Evaluation of hot forming effects mapping for CAE analyses

NASA Astrophysics Data System (ADS)

Knoerr, L.; Faath, T.; Dykeman, J.; Malcolm, S.

2016-08-01

Hot forming has grown significantly in the manufacturing of structural components within the vehicle Body-In-White construction. The superior strength of press hardened steels not only guarantee high resistance to deformation, it also brings a significant weight saving compared to conventional cold formed products. However, the benefit of achieving ultrahigh strength with hot stamping, comes with a reduction in ductility of the press hardened part. This will require advanced material modeling to capture the predicted performances accurately. A technique to optically measure and map the thinning distribution after hot stamping has shown to improve numerical analysis for fracture prediction. The proposed method to determine the forming effects and mapping to CAE models can be integrated into the Vehicle Development Process to shorten the time to production.

Can evaluation of a dental procedure at the outset of learning predict later performance at the preclinical level? A pilot study.

PubMed

Polyzois, Ioannis; Claffey, Noel; McDonald, Albhe; Hussey, David; Quinn, Frank

2011-05-01

The purpose of this study was to examine the effectiveness of conventional pre-clinical training in dentistry and to determine if evaluation of a dental procedure at the beginning of dental training can be a predictor for future performance. A group of second year dental students with no previous experience in operative dentistry were asked to prepare a conventional class I cavity on a lower first molar typodont. Their first preparation was carried out after an introductory lecture and a demonstration and their second at the end of conventional training. The prepared typodonts were coded and blindly scored for the traditional assessment criteria of outline form, retention form, smoothness, cavity depth and cavity margin angulation. Once the codes were broken, a paired t-test was used to compare the difference between the means of before and after scores (P<0.0001) and a Pearson's linear correlation to test the association (r=0.4). From the results of this study, we could conclude that conventional preclinical training results in a significant improvement in the manual skills of the dental students and that the dental procedure used had only a limited predictive value for later performance at the preclinical level. © 2011 John Wiley & Sons A/S.

Novel immunotherapeutic strategies in chronic inflammatory demyelinating polyneuropathy.

PubMed

Mathis, Stéphane; Vallat, Jean-Michel; Magy, Laurent

2016-02-01

Chronic inflammatory demyelinating polyradiculoneuropathy (CIDP) is a chronic immune-mediated neuropathy: it is clinically heterogeneous (relapsing-remitting form, chronic progressive form, monophasic form or CIDP having a Guillain-Barré syndrome-like onset), but potentially treatable. Although its pathophysiology remains largely unknown, CIDP is considered an immune-mediated neuropathy. Therefore, many immunotherapies have been proposed in this peripheral nervous system disorder, the most known efficient treatments being intravenous immunoglobulin, corticosteroids and plasma exchange. However, these therapies remain unsatisfactory for many patients, so numerous other immunotherapeutic strategies have been evaluated, based on their immunosuppressant or immunomodulatory potency. We have performed a large review of the literature about treatment in CIDP, with a special emphasis on novel and alternative immunotherapeutic strategies.

Performance Evaluation of MIND Demons Deformable Registration of MR and CT Images in Spinal Interventions

PubMed Central

Reaungamornrat, S.; De Silva, T.; Uneri, A.; Goerres, J.; Jacobson, M.; Ketcha, M.; Vogt, S.; Kleinszig, G.; Khanna, A. J.; Wolinsky, J.-P.; Prince, J. L.; Siewerdsen, J. H.

2016-01-01

Accurate intraoperative localization of target anatomy and adjacent nervous and vascular tissue is essential to safe, effective surgery, and multimodality deformable registration can be used to identify such anatomy by fusing preoperative CT or MR images with intraoperative images. A deformable image registration method has been developed to estimate viscoelastic diffeomorphisms between preoperative MR and intraoperative CT using modality-independent neighborhood descriptors (MIND) and a Huber metric for robust registration. The method, called MIND Demons, optimizes a constrained symmetric energy functional incorporating priors on smoothness, geodesics, and invertibility by alternating between Gauss-Newton optimization and Tikhonov regularization in a multiresolution scheme. Registration performance was evaluated for the MIND Demons method with a symmetric energy formulation in comparison to an asymmetric form, and sensitivity to anisotropic MR voxel-size was analyzed in phantom experiments emulating image-guided spine-surgery in comparison to a free-form deformation (FFD) method using local mutual information (LMI). Performance was validated in a clinical study involving 15 patients undergoing intervention of the cervical, thoracic, and lumbar spine. The target registration error (TRE) for the symmetric MIND Demons formulation [1.3 ± 0.8 mm (median ± interquartile)] outperformed the asymmetric form [3.6 ± 4.4 mm]. The method demonstrated fairly minor sensitivity to anisotropic MR voxel size, with median TRE ranging 1.3 – 2.9 mm for MR slice thickness ranging 0.9 – 9.9 mm, compared to TRE = 3.2 – 4.1 mm for LMI FFD over the same range. Evaluation in clinical data demonstrated sub-voxel TRE (< 2 mm) in all fifteen cases with realistic deformations that preserved topology with sub-voxel invertibility (0.001 mm) and positive-determinant spatial Jacobians. The approach therefore appears robust against realistic anisotropic resolution characteristics in MR and yields registration accuracy suitable to application in image-guided spine-surgery. PMID:27811396

Performance evaluation of MIND demons deformable registration of MR and CT images in spinal interventions.

PubMed

Reaungamornrat, S; De Silva, T; Uneri, A; Goerres, J; Jacobson, M; Ketcha, M; Vogt, S; Kleinszig, G; Khanna, A J; Wolinsky, J-P; Prince, J L; Siewerdsen, J H

2016-12-07

Accurate intraoperative localization of target anatomy and adjacent nervous and vascular tissue is essential to safe, effective surgery, and multimodality deformable registration can be used to identify such anatomy by fusing preoperative CT or MR images with intraoperative images. A deformable image registration method has been developed to estimate viscoelastic diffeomorphisms between preoperative MR and intraoperative CT using modality-independent neighborhood descriptors (MIND) and a Huber metric for robust registration. The method, called MIND Demons, optimizes a constrained symmetric energy functional incorporating priors on smoothness, geodesics, and invertibility by alternating between Gauss-Newton optimization and Tikhonov regularization in a multiresolution scheme. Registration performance was evaluated for the MIND Demons method with a symmetric energy formulation in comparison to an asymmetric form, and sensitivity to anisotropic MR voxel-size was analyzed in phantom experiments emulating image-guided spine-surgery in comparison to a free-form deformation (FFD) method using local mutual information (LMI). Performance was validated in a clinical study involving 15 patients undergoing intervention of the cervical, thoracic, and lumbar spine. The target registration error (TRE) for the symmetric MIND Demons formulation (1.3  ±  0.8 mm (median  ±  interquartile)) outperformed the asymmetric form (3.6  ±  4.4 mm). The method demonstrated fairly minor sensitivity to anisotropic MR voxel size, with median TRE ranging 1.3-2.9 mm for MR slice thickness ranging 0.9-9.9 mm, compared to TRE  =  3.2-4.1 mm for LMI FFD over the same range. Evaluation in clinical data demonstrated sub-voxel TRE (<2 mm) in all fifteen cases with realistic deformations that preserved topology with sub-voxel invertibility (0.001 mm) and positive-determinant spatial Jacobians. The approach therefore appears robust against realistic anisotropic resolution characteristics in MR and yields registration accuracy suitable to application in image-guided spine-surgery.

Performance evaluation of MIND demons deformable registration of MR and CT images in spinal interventions

NASA Astrophysics Data System (ADS)

Reaungamornrat, S.; De Silva, T.; Uneri, A.; Goerres, J.; Jacobson, M.; Ketcha, M.; Vogt, S.; Kleinszig, G.; Khanna, A. J.; Wolinsky, J.-P.; Prince, J. L.; Siewerdsen, J. H.

2016-12-01

Accurate intraoperative localization of target anatomy and adjacent nervous and vascular tissue is essential to safe, effective surgery, and multimodality deformable registration can be used to identify such anatomy by fusing preoperative CT or MR images with intraoperative images. A deformable image registration method has been developed to estimate viscoelastic diffeomorphisms between preoperative MR and intraoperative CT using modality-independent neighborhood descriptors (MIND) and a Huber metric for robust registration. The method, called MIND Demons, optimizes a constrained symmetric energy functional incorporating priors on smoothness, geodesics, and invertibility by alternating between Gauss-Newton optimization and Tikhonov regularization in a multiresolution scheme. Registration performance was evaluated for the MIND Demons method with a symmetric energy formulation in comparison to an asymmetric form, and sensitivity to anisotropic MR voxel-size was analyzed in phantom experiments emulating image-guided spine-surgery in comparison to a free-form deformation (FFD) method using local mutual information (LMI). Performance was validated in a clinical study involving 15 patients undergoing intervention of the cervical, thoracic, and lumbar spine. The target registration error (TRE) for the symmetric MIND Demons formulation (1.3  ±  0.8 mm (median  ±  interquartile)) outperformed the asymmetric form (3.6  ±  4.4 mm). The method demonstrated fairly minor sensitivity to anisotropic MR voxel size, with median TRE ranging 1.3-2.9 mm for MR slice thickness ranging 0.9-9.9 mm, compared to TRE  =  3.2-4.1 mm for LMI FFD over the same range. Evaluation in clinical data demonstrated sub-voxel TRE (<2 mm) in all fifteen cases with realistic deformations that preserved topology with sub-voxel invertibility (0.001 mm) and positive-determinant spatial Jacobians. The approach therefore appears robust against realistic anisotropic resolution characteristics in MR and yields registration accuracy suitable to application in image-guided spine-surgery.

Summary of design and blade-element performance data for 12 axial-flow pump rotor configurations

NASA Technical Reports Server (NTRS)

Miller, M. J.; Okiishi, T. H.; Serovy, G. K.; Sandercock, D. M.; Britsch, W. R.

1973-01-01

A collection of noncavitating blade-element performance data for 12 axial-flow pump rotor configurations is presented in tabular form. Rotor design philosophy, test apparatus and procedure, and data reduction and evaluation are discussed. A data storage and recall computer program is described. All but one of the rotor configurations considered were composed of double-circular-arc blade sections and were designed for high inlet relative flow angles. Hub-tip radius ranged from 0.40 to 0.90.

Evaluation of Non-Oxide Fuel for Fission-based Nuclear Reactors on Spacecraft

DTIC Science & Technology

smaller and potentially lighter core, whichis a significant advantage. The results of this study indicate that use of both UC and UN may result in significant weight savings due tohigher uranium loading density....The goal of this project was to study the performance of atypical uranium-based fuels in a nuclear reactor capable of producing 1 megawattof thermal...UN), or uranium carbide (UC) and compared their performance to uranium oxide (UO2) which is thefuel form used in the vast majority of commercial

Radionuclide Incorporation and Long Term Performance of Apatite Waste Forms

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wang, Jianwei; Lian, Jie; Gao, Fei

2016-01-04

This project aims to combines state-of-the-art experimental and characterization techniques with atomistic simulations based on density functional theory (DFT) and molecular dynamics (MD) simulations. With an initial focus on long-lived I-129 and other radionuclides such as Cs, Sr in apatite structure, specific research objectives include the atomic scale understanding of: (1) incorporation behavior of the radionuclides and their effects on the crystal chemistry and phase stability; (2) stability and microstructure evolution of designed waste forms under coupled temperature and radiation environments; (3) incorporation and migration energetics of radionuclides and release behaviors as probed by DFT and molecular dynamics (MD) simulations;more » and (4) chemical durability as measured in dissolution experiments for long term performance evaluation and model validation.« less

Comparative assessment of three standardized robotic surgery training methods.

PubMed

Hung, Andrew J; Jayaratna, Isuru S; Teruya, Kara; Desai, Mihir M; Gill, Inderbir S; Goh, Alvin C

2013-10-01

To evaluate three standardized robotic surgery training methods, inanimate, virtual reality and in vivo, for their construct validity. To explore the concept of cross-method validity, where the relative performance of each method is compared. Robotic surgical skills were prospectively assessed in 49 participating surgeons who were classified as follows: 'novice/trainee': urology residents, previous experience <30 cases (n = 38) and 'experts': faculty surgeons, previous experience ≥30 cases (n = 11). Three standardized, validated training methods were used: (i) structured inanimate tasks; (ii) virtual reality exercises on the da Vinci Skills Simulator (Intuitive Surgical, Sunnyvale, CA, USA); and (iii) a standardized robotic surgical task in a live porcine model with performance graded by the Global Evaluative Assessment of Robotic Skills (GEARS) tool. A Kruskal-Wallis test was used to evaluate performance differences between novices and experts (construct validity). Spearman's correlation coefficient (ρ) was used to measure the association of performance across inanimate, simulation and in vivo methods (cross-method validity). Novice and expert surgeons had previously performed a median (range) of 0 (0-20) and 300 (30-2000) robotic cases, respectively (P < 0.001). Construct validity: experts consistently outperformed residents with all three methods (P < 0.001). Cross-method validity: overall performance of inanimate tasks significantly correlated with virtual reality robotic performance (ρ = -0.7, P < 0.001) and in vivo robotic performance based on GEARS (ρ = -0.8, P < 0.0001). Virtual reality performance and in vivo tissue performance were also found to be strongly correlated (ρ = 0.6, P < 0.001). We propose the novel concept of cross-method validity, which may provide a method of evaluating the relative value of various forms of skills education and assessment. We externally confirmed the construct validity of each featured training tool. © 2013 BJU International.

Evaluating Professionalism, Practice-Based Learning and Improvement, and Systems-Based Practice: Utilization of a Compliance Form and Correlation with Conflict Styles

PubMed Central

Ogunyemi, Dotun; Eno, Michelle; Rad, Steve; Fong, Alex; Alexander, Carolyn; Azziz, Ricardo

2010-01-01

Objective The purpose of this article was to develop and determine the utility of a compliance form in evaluating and teaching the Accreditation Council for Graduate Medical Education competencies of professionalism, practice-based learning and improvement, and systems-based practice. Methods In 2006, we introduced a 17-item compliance form in an obstetrics and gynecology residency program. The form prospectively monitored residents on attendance at required activities (5 items), accountability of required obligations (9 items), and completion of assigned projects (3 items). Scores were compared to faculty evaluations of residents, resident status as a contributor or a concerning resident, and to the residents' conflict styles, using the Thomas-Kilmann Conflict MODE Instrument. Results Our analysis of 18 residents for academic year 2007–2008 showed a mean (standard error of mean) of 577 (65.3) for postgraduate year (PGY)-1, 692 (42.4) for PGY-2, 535 (23.3) for PGY-3, and 651.6 (37.4) for PGY-4. Non-Hispanic white residents had significantly higher scores on compliance, faculty evaluations on interpersonal and communication skills, and competence in systems-based practice. Contributing residents had significantly higher scores on compliance compared with concerning residents. Senior residents had significantly higher accountability scores compared with junior residents, and junior residents had increased project completion scores. Attendance scores increased and accountability scores decreased significantly between the first and second 6 months of the academic year. There were positive correlations between compliance scores with competing and collaborating conflict styles, and significant negative correlations between compliance with avoiding and accommodating conflict styles. Conclusions Maintaining a compliance form allows residents and residency programs to focus on issues that affect performance and facilitate assessment of the ACGME competencies. Postgraduate year, behavior, and conflict styles appear to be associated with compliance. A lack of association with faculty evaluations suggests measurement of different perceptions of residents' behavior. PMID:21976093

Evaluating professionalism, practice-based learning and improvement, and systems-based practice: utilization of a compliance form and correlation with conflict styles.

PubMed

Ogunyemi, Dotun; Eno, Michelle; Rad, Steve; Fong, Alex; Alexander, Carolyn; Azziz, Ricardo

2010-09-01

The purpose of this article was to develop and determine the utility of a compliance form in evaluating and teaching the Accreditation Council for Graduate Medical Education competencies of professionalism, practice-based learning and improvement, and systems-based practice. In 2006, we introduced a 17-item compliance form in an obstetrics and gynecology residency program. The form prospectively monitored residents on attendance at required activities (5 items), accountability of required obligations (9 items), and completion of assigned projects (3 items). Scores were compared to faculty evaluations of residents, resident status as a contributor or a concerning resident, and to the residents' conflict styles, using the Thomas-Kilmann Conflict MODE Instrument. Our analysis of 18 residents for academic year 2007-2008 showed a mean (standard error of mean) of 577 (65.3) for postgraduate year (PGY)-1, 692 (42.4) for PGY-2, 535 (23.3) for PGY-3, and 651.6 (37.4) for PGY-4. Non-Hispanic white residents had significantly higher scores on compliance, faculty evaluations on interpersonal and communication skills, and competence in systems-based practice. Contributing residents had significantly higher scores on compliance compared with concerning residents. Senior residents had significantly higher accountability scores compared with junior residents, and junior residents had increased project completion scores. Attendance scores increased and accountability scores decreased significantly between the first and second 6 months of the academic year. There were positive correlations between compliance scores with competing and collaborating conflict styles, and significant negative correlations between compliance with avoiding and accommodating conflict styles. Maintaining a compliance form allows residents and residency programs to focus on issues that affect performance and facilitate assessment of the ACGME competencies. Postgraduate year, behavior, and conflict styles appear to be associated with compliance. A lack of association with faculty evaluations suggests measurement of different perceptions of residents' behavior.

The impact of health plan delivery system organization on clinical quality and patient satisfaction.

PubMed

Gillies, Robin R; Chenok, Kate Eresian; Shortell, Stephen M; Pawlson, Gregory; Wimbush, Julian J

2006-08-01

The purpose of this study was to examine the extent to which measures of health plan clinical performance and measures of patient perceptions of care are associated with health plan organizational characteristics, including the percentage of care provided based on a group or staff model delivery system, for-profit (tax) status, and affiliation with a national managed care firm. Data describing health plans on region, age of health plan, for-profit status, affiliation with a national managed care firm, percentage of Medicare business, total enrollment, ratio of primary care physicians to specialists, HMO penetration, and form of health care delivery system (e.g., IPA, network, mixed, staff, group) were obtained from InterStudy. Clinical performance measures for women's health screening rates, child and adolescent immunization rates, heart disease screening rates, diabetes screening rates, and smoking cessation were developed from HEDIS data. Measures of patient perceptions of care are obtained from CAHPS survey data submitted as Healthplan Employer Data and Information Set, Consumer Assessment of Health Plans 2.0 H. Multivariate regression cross-sectional analysis of 272 health plans was used to evaluate the relationship of health plan characteristics with measures of clinical performance and patient perceptions of care. The form of delivery system, measured by percent of care delivered by staff and group model systems, is significantly related (p < or = .05) with four of the five clinical performance indices but none of the three satisfaction performance indices. Other variables significantly associated with performance were being geographically located in the Northeast, having nonprofit status, and for patient satisfaction, not being part of a larger insurance company. These comparative results provide evidence suggesting that the type of delivery system used by health plans is related to many clinical performance measures but is not related to patient perceptions of care. These findings underscore the importance of the form of the delivery system and the need for further inquiry that examines the relationship between organizational form and performance.

Evaluation of Preanalytical Quality Indicators by Six Sigma and Pareto`s Principle.

PubMed

Kulkarni, Sweta; Ramesh, R; Srinivasan, A R; Silvia, C R Wilma Delphine

2018-01-01

Preanalytical steps are the major sources of error in clinical laboratory. The analytical errors can be corrected by quality control procedures but there is a need for stringent quality checks in preanalytical area as these processes are done outside the laboratory. Sigma value depicts the performance of laboratory and its quality measures. Hence in the present study six sigma and Pareto principle was applied to preanalytical quality indicators to evaluate the clinical biochemistry laboratory performance. This observational study was carried out for a period of 1 year from November 2015-2016. A total of 1,44,208 samples and 54,265 test requisition forms were screened for preanalytical errors like missing patient information, sample collection details in forms and hemolysed, lipemic, inappropriate, insufficient samples and total number of errors were calculated and converted into defects per million and sigma scale. Pareto`s chart was drawn using total number of errors and cumulative percentage. In 75% test requisition forms diagnosis was not mentioned and sigma value of 0.9 was obtained and for other errors like sample receiving time, stat and type of sample sigma values were 2.9, 2.6, and 2.8 respectively. For insufficient sample and improper ratio of blood to anticoagulant sigma value was 4.3. Pareto`s chart depicts out of 80% of errors in requisition forms, 20% is contributed by missing information like diagnosis. The development of quality indicators, application of six sigma and Pareto`s principle are quality measures by which not only preanalytical, the total testing process can be improved.

The influence of nontraditional training modalities on physical performance: review of the literature.

PubMed

O'Hara, Reginald B; Serres, Jennifer; Traver, Kyle L; Wright, Bruce; Vojta, Chris; Eveland, Ed

2012-10-01

The primary purpose of this effort was to review several forms of nontraditional (NT) training programs, including heavy lower extremity strength training, CrossFit training, kettlebell training, and agility training, and discuss the effects of these exercise regimens on physical performance. The secondary purpose was to evaluate NT fitness training programs for evidence that they may provide beneficial options to help airmen improve their fitness scores. A search of the literature for 1980-2010 was performed using the Franzello Aeromedical Library, Public Medicine, and Air Force Institute of Technology search engines. There were 50 articles located and the authors selected 29 articles that specifically addressed the primary and secondary purposes of this literature review. This review indicates that an NT training approach is warranted in the general Air Force population. Heavy leg strength training and agility training show promise in enhancing aerobic fitness and improving fitness scores, particularly among members who have difficulty passing a physical fitness test. Most of the nontraditional forms of physical training are not supported in the scientific literature, with the exception of heavy leg strength training and agility training. However, even these NT forms of training require further investigation.

Formulation, functional evaluation and ex vivo performance of thermoresponsive soluble gels - A platform for therapeutic delivery to mucosal sinus tissue.

PubMed

Pandey, Preeti; Cabot, Peter J; Wallwork, Benjamin; Panizza, Benedict J; Parekh, Harendra S

2017-01-01

Mucoadhesive in situ gelling systems (soluble gels) have received considerable attention recently as effective stimuli-transforming vectors for a range of drug delivery applications. Considering this fact, the present work involves systematic formulation development, optimization, functional evaluation and ex vivo performance of thermosensitive soluble gels containing dexamethasone 21-phosphate disodium salt (DXN) as the model therapeutic. A series of in situ gel-forming systems comprising the thermoreversible polymer poloxamer-407 (P407), along with hydroxypropyl methyl cellulose (HPMC) and chitosan were first formulated. The optimized soluble gels were evaluated for their potential to promote greater retention at the mucosal surface, for improved therapeutic efficacy, compared to existing solution/suspension-based steroid formulations used clinically. Optimized soluble gels demonstrated a desirable gelation temperature with Newtonian fluid behaviour observed under storage conditions (4-8°C), and pseudoplastic fluid behaviour recorded at nasal cavity/sinus temperature (≈34°C). The in vitro characterization of formulations including rheological evaluation, textural analysis and mucoadhesion studies of the gel form were investigated. Considerable improvement in mechanical properties and mucoadhesion was observed with incorporation of HPMC and chitosan into the gelling systems. The lead poloxamer-based soluble gels, PGHC4 and PGHC7, which were carried through to ex vivo permeation studies displayed extended drug release profiles in conditions mimicking the human nasal cavity, which indicates their suitability for treating a range of conditions affecting the nasal cavity/sinuses. Copyright © 2016 Elsevier B.V. All rights reserved.

Evaluation of a pilot workload metric for simulated VTOL landing tasks

NASA Technical Reports Server (NTRS)

North, R. A.; Graffunder, K.

1979-01-01

A methodological approach to measuring workload was investigated for evaluation of new concepts in VTOL aircraft displays. Multivariate discriminant functions were formed from conventional flight performance and/or visual response variables to maximize detection of experimental differences. The flight performance variable discriminant showed maximum differentiation between crosswind conditions. The visual response measure discriminant maximized differences between fixed vs. motion base conditions and experimental displays. Physiological variables were used to attempt to predict the discriminant function values for each subject/condition/trial. The weights of the physiological variables in these equations showed agreement with previous studies. High muscle tension, light but irregular breathing patterns, and higher heart rate with low amplitude all produced higher scores on this scale and thus, represented higher workload levels.

Flight test evaluation of a method to determine the level flight performance of a propeller-driven aircraft

NASA Technical Reports Server (NTRS)

Bridges, P. G.; Cross, E. J., Jr.; Boatwright, D. W.

1977-01-01

The overall drag of the aircraft is expressed in terms of the measured increment of power required to overcome a corresponding known increment of drag, which is generated by a towed drogue. The simplest form of the governing equations, D = delta D SHP/delta SHP, is such that all of the parameters on the right side of the equation can be measured in flight. An evaluation of the governing equations has been performed using data generated by flight test of a Beechcraft T-34B. The simplicity of this technique and its proven applicability to sailplanes and small aircraft is well known. However, the method fails to account for airframe-propulsion system.

Theoretical studies of system performance and adaptive optics design parameters

NASA Astrophysics Data System (ADS)

Tyson, Robert K.

1990-08-01

The ultimate performance of an adaptive optics (AO) system can be sensitive to specific design parameters of individual components. The type and configuration of a wavefront sensor or the shape of individual deformable mirror actuator influence functions can have a profound effect on the correctability of the AO system. This paper will discuss the results of a theoretical study which employed both closed form analytic solutions and computer models. A parametric analysis of wavefront sensor characteristics, noise, and subaperture geometry are independently evaluated against system response to an aberrated wave characteristic of atmospheric turbulence. Similarly, the shape and extent of the deformable mirror influence function and the placement and number of actuators is evaluated to characterize the effects of fitting error and coupling.

Effects of alfalfa hay and its physical form (chopped versus pelleted) on performance of Holstein calves.

PubMed

Jahani-Moghadam, M; Mahjoubi, E; Hossein Yazdi, M; Cardoso, F C; Drackley, J K

2015-06-01

Inclusion of forage and its physical form in starter may affect rumen development, average daily gain (ADG), and dry matter intake (DMI) of dairy calves. To evaluate the effects of forage and its physical form (chopped vs. pelleted) on growth of calves under a high milk feeding regimen, 32 Holstein calves (38.8±1.1kg) were assigned at birth to 1 of 3 treatments in a completely randomized block design. Dietary treatments (% of dry matter) were (1) 100% semi-texturized starter (CON); (2) 90% semi-texturized starter + 10% chopped alfalfa hay (mean particle size=5.4mm) as a total mixed ration (TMR; CH); and (3) 90% semi-texturized starter + 10% pelleted alfalfa (mean=5.8mm) hay as a TMR (PH). Data were subjected to mixed model analysis with contrasts used to evaluate effect of forage inclusion. Calves were weaned at 76 d of age and the experiment finished 2 wk after weaning. Individual milk and solid feed consumption were recorded daily. Solid feed consumption and ADG increased as age increased (effect of week), but neither forage inclusion nor physical form of forage affected these variables pre- or postweaning. Plasma urea N was affected by treatments such that the CON group had a lower concentration than forage-fed groups. Forage inclusion, but not physical form, resulted in increased total protein in plasma. Although days with elevated rectal temperature, fecal score, and general appearance were not affected by dietary treatments, calves fed alfalfa hay during the first month of life had fewer days with respiratory issues, regardless of physical form of hay. We concluded that provision of forage does have some beneficial effects in calves fed large amounts of milk replacer, but pelleted alfalfa hay did not result in any improvement in calf performance or health. Copyright © 2015 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

Subjective quality evaluation of low-bit-rate video

NASA Astrophysics Data System (ADS)

Masry, Mark; Hemami, Sheila S.; Osberger, Wilfried M.; Rohaly, Ann M.

2001-06-01

A subjective quality evaluation was performed to qualify vie4wre responses to visual defects that appear in low bit rate video at full and reduced frame rates. The stimuli were eight sequences compressed by three motion compensated encoders - Sorenson Video, H.263+ and a Wavelet based coder - operating at five bit/frame rate combinations. The stimulus sequences exhibited obvious coding artifacts whose nature differed across the three coders. The subjective evaluation was performed using the Single Stimulus Continuos Quality Evaluation method of UTI-R Rec. BT.500-8. Viewers watched concatenated coded test sequences and continuously registered the perceived quality using a slider device. Data form 19 viewers was colleted. An analysis of their responses to the presence of various artifacts across the range of possible coding conditions and content is presented. The effects of blockiness and blurriness on perceived quality are examined. The effects of changes in frame rate on perceived quality are found to be related to the nature of the motion in the sequence.

Report on the U.S. Geological Survey's Evaluation Program Standard Reference Samples Distributed in October 1995: T-137 (Trace Constituents), M-136 (Major Constituents), N-47 (Nutrient Constituents), N-48 (Nutrient Constituents), P-25 (Low Ionic Strength Constituents), and Hg-21 (Mercury)

USGS Publications Warehouse

Farrar, Jerry W.; Long, H. Keith

1996-01-01

This report presents the results of the U.S. Geological Survey's analytical evaluation program for 6 standard reference samples--T-137 (trace constituents), M-136 (major constituents), N-47 (nutrient constituents), N-48 (nutrient constituents), P-25 (low ionic strength constituents), and Hg-21 (mercury)--that were distributed in October 1995 to 149 laboratories registered in the U.S. Geological Survey sponsored interlaboratory testing program. Analytical data that were received from 136 of the laboratories were evaluated with respect to: overall laboratory performance and relative laboratory performance for each analyte in the six reference samples. Results of these evaluations are presented in tabular form. Also presented are tables and graphs summarizing the analytical data provided by each laboratory for each analyte in the six standard reference samples. The most probable value for each analyte was determined using nonparametric statistics.

Report on the U.S. Geological Survey's evaluation program for standard reference samples distributed in April 1994; T-129 (trace constituents), M-130 (major constituents), N-42 (nutrients), P-22 (low ionic strength), and Hg-18 (mercury)

USGS Publications Warehouse

Long, H. Keith; Farrar, Jerry W.

1994-01-01

This report presents the results of the U.S. Geological Survey's analytical evaluation program for five standard reference samples--T-129 (trace constituents), M-130 (major constituents), N-42 (nutrients), P-22 (low ionic strength), Hg-18(mercury),--that were distributed in April 1994 to 157 laboratories registered in the U.S. Geological Survey sponsored interlaboratory testing program. Analytical data that were received from 133 of the laboratories were evaluated with respect to: overall laboratory performance and relative laboratory performance for each analyte in the five reference samples. Results of these evaluations are presented in tabular form. Also presented are tables and graphs summarizing the analytical data provided by each laboratory for each analyte in the five standard reference samples. The most probable value for each analyte was determined using nonparametric statistics.

Report of the U.S. Geological Survey's evaluation program for standard reference samples distributed in April 1993; T-123 (trace constituents), T-125 (trace constituents), M-126 (major constituents, N-38 (nutrients), N-39 (nutrients), P-20 (low ionic strength, and Hg-16 (mercury)

USGS Publications Warehouse

Long, H.K.; Farrar, J.W.

1993-01-01

This report presents the results of the U.S. Geological Survey's analytical evaluation program for seven standard reference samples--T-123 (trace constituents), T-125 (trace constituents), M-126 (major constituents), N-38 (nutrients), N-39 (Nutrients), P-20 (precipitation-low ionic strength), and Hg-16 (mercury)--that were distributed in April 1993 to 175 laboratories registered in the U.S. Geological Survey sponsored interlaboratory testing program. Analytical data received from 131 of the laboratories were evaluated with respect to: overall laboratory performance and relative laboratory performance for each analyte in the 7 reference samples. Results of these evaluations are presented in tabular form. Also presented are tables and graphs summarizing the analytical data provided by each laboratory for each analyte in the seven standard reference samples. The most probable value for each analyte was determined using nonparametric statistics.

Results of the U.S. Geological Survey's Analytical Evaluation Program for standard reference samples distributed in March 1999

USGS Publications Warehouse

Farrar, Jerry W.; Chleboun, Kimberly M.

1999-01-01

This report presents the results of the U.S. Geological Survey's analytical evaluation program for 8 standard reference samples -- T-157 (trace constituents), M-150 (major constituents), N-61 (nutrient constituents), N-62 (nutrient constituents), P-32 (low ionic strength constituents), GWT-5 (ground-water trace constituents), GWM- 4 (ground-water major constituents),and Hg-28 (mercury) -- that were distributed in March 1999 to 120 laboratories enrolled in the U.S. Geological Survey sponsored interlaboratory testing program. Analytical data that were received from 111 of the laboratories were evaluated with respect to overall laboratory performance and relative laboratory performance for each analyte in the seven reference samples. Results of these evaluations are presented in tabular form. Also presented are tables and graphs summarizing the analytical data provided by each laboratory for each analyte in the 8 standard reference samples. The most probable value for each analyte was determined using nonparametric statistics.

An Evaluation of Gender Differences in Computer-Based Case Simulations.

ERIC Educational Resources Information Center

Scheuneman, Janice Dowd; And Others

As part of the research leading to the implementation of computer-based case simulations (CCS) for the licensing examinations of the National Board of Medical Examiners, gender differences in performance were studied for one form consisting of 18 cases. A secondary purpose of the study was to note differences in style or approach that might…

AN ENVIRONMENTAL TECHNOLOGY VERIFICATION (ETV) PERFORMANCE TESTING OF THE INDUSTRIAL TEST SYSTEM, INC. CYANIDE REAGENTSTRIP™ TEST KIT

EPA Science Inventory

Cyanide can be present in various forms in water. The cyanide test kit evaluated in this verification study (Industrial Test System, Inc. Cyanide Regent Strip ™ Test Kit) was designed to detect free cyanide in water. This is done by converting cyanide in water to cyanogen...

75 FR 62913 - 30-Day Notice of Proposed Information Collection: Form DS-3053, Statement of Consent or Special...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-13

... properly perform our functions. Evaluate the accuracy of our estimate of the burden of the proposed... issuance of passports to U.S. citizens and nationals under the age of 16. The primary purpose of soliciting... family circumstances. Methodology: Passport Services collects information from U.S. citizens and non...

Degradation of Nitroguanidine in Soils

DTIC Science & Technology

1985-01-01

columns. Nitroguanidine was biodegraded if sufficient supplemental carbon was provided in the wastewater. The primary product formed during the... biodegradation of nitroguanidine in soil was ammonia. Only trace concentration of nitrosoguanidine were detected and no significant levels of other organic...low cost treatment option for these wastewaters. In addition, preliminary work was performed to evaluate the biodegradability of guanidine nitrate

Validation of an In Vitro Bioaccessability Test Method for the Estimation of the Bioavailability of Arsenic from Soil and Sediment

DTIC Science & Technology

2012-12-01

evaluate predictive performance following methods described in Malinowski et al. (1997). Acceptance criteria and control limits will be based on...69: 69–78. Malinowski , H., P. Marroum, V.R. Uppoor, et al. 1997. Draft guidance for industry extended release solid oral dosage forms. In: Young D

Self-excited rotor whirl due to tip-seal leakage forces

NASA Technical Reports Server (NTRS)

Leie, B.; Thomas, H. J.

1980-01-01

The limitations in the performance of turbomachines which arise as a result of selfexcited vibration were investigated. Bearing forces, elastic hysteresis, and forces from fluid flow through clearances were considered as possible origins. A theoretical evaluation was made to determine the dependence of the forces form the leakage losses and from rotating flow in radial gaps.

Performance Evaluation of a Biometric System Based on Acoustic Images

PubMed Central

Izquierdo-Fuente, Alberto; del Val, Lara; Jiménez, María I.; Villacorta, Juan J.

2011-01-01

An acoustic electronic scanning array for acquiring images from a person using a biometric application is developed. Based on pulse-echo techniques, multifrequency acoustic images are obtained for a set of positions of a person (front, front with arms outstretched, back and side). Two Uniform Linear Arrays (ULA) with 15 λ/2-equispaced sensors have been employed, using different spatial apertures in order to reduce sidelobe levels. Working frequencies have been designed on the basis of the main lobe width, the grating lobe levels and the frequency responses of people and sensors. For a case-study with 10 people, the acoustic profiles, formed by all images acquired, are evaluated and compared in a mean square error sense. Finally, system performance, using False Match Rate (FMR)/False Non-Match Rate (FNMR) parameters and the Receiver Operating Characteristic (ROC) curve, is evaluated. On the basis of the obtained results, this system could be used for biometric applications. PMID:22163708

Integrated multi sensors and camera video sequence application for performance monitoring in archery

NASA Astrophysics Data System (ADS)

Taha, Zahari; Arif Mat-Jizat, Jessnor; Amirul Abdullah, Muhammad; Muazu Musa, Rabiu; Razali Abdullah, Mohamad; Fauzi Ibrahim, Mohamad; Hanafiah Shaharudin, Mohd Ali

2018-03-01

This paper explains the development of a comprehensive archery performance monitoring software which consisted of three camera views and five body sensors. The five body sensors evaluate biomechanical related variables of flexor and extensor muscle activity, heart rate, postural sway and bow movement during archery performance. The three camera views with the five body sensors are integrated into a single computer application which enables the user to view all the data in a single user interface. The five body sensors’ data are displayed in a numerical and graphical form in real-time. The information transmitted by the body sensors are computed with an embedded algorithm that automatically transforms the summary of the athlete’s biomechanical performance and displays in the application interface. This performance will be later compared to the pre-computed psycho-fitness performance from the prefilled data into the application. All the data; camera views, body sensors; performance-computations; are recorded for further analysis by a sports scientist. Our developed application serves as a powerful tool for assisting the coach and athletes to observe and identify any wrong technique employ during training which gives room for correction and re-evaluation to improve overall performance in the sport of archery.

Comparative evaluation of salivary bisphenol A levels in patients wearing vacuum-formed and Hawley retainers: An in-vivo study.

PubMed

Raghavan, Akila Srinivasan; Pottipalli Sathyanarayana, Haritha; Kailasam, Vignesh; Padmanabhan, Sridevi

2017-03-01

The aims of the study were to evaluate and compare the bisphenol A (BPA) levels in saliva in patients using vacuum-formed retainers or Hawley retainers. Forty-five patients who had completed their fixed orthodontic treatment and were entering the retention phase were randomly allocated into 1 of 3 groups: vacuum-formed retainer, Hawley retainer fabricated by heat cure, and Hawley retainer fabricated by chemical cure. Saliva samples were collected immediately before placement, within 1 hour after placement, 1 week and 1 month after placement. Statistical analyses were performed by using 2-way analysis of variance and post-hoc multiple-comparisons Tukey HSD tests. Statistically significant BPA levels in saliva were found for all groups (P ≤0.05). The highest levels were noted in the vacuum-formed retainer group, followed by Hawley retainers fabricated by chemical cure; the lowest levels were found with Hawley retainers fabricated by heat cure. With many options available for removable retainers, clinicians should consider the BPA release from these retainers; a Hawley retainer fabricated by heat cure is a favorable choice. Copyright © 2016 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.

The effects of below-elbow immobilization on driving performance.

PubMed

Jones, Evan M; Barrow, Aaron E; Skordas, Nic J; Green, David P; Cho, Mickey S

2017-02-01

There is limited research to guide physicians and patients in deciding whether it is safe to drive while wearing various forms of upper extremity immobilization. The purpose of this study is to evaluate the effect of below-elbow removable splints and fiberglass casts on automobile driving performance. 20 healthy subjects completed 10 runs through a closed, cone-marked driving course while wearing a randomized sequence of four different types of immobilization on each extremity (short arm thumb spica fiberglass cast, short arm fiberglass cast, short arm thumb spica splint, and short arm wrist splint). The first and last driving runs were without immobilization and served as controls. Performance was measured based on evaluation by a certified driving instructor (pass/fail scoring), cones hit, run time, and subject-perceived driving difficulty (1-10 analogue scoring). The greatest number of instructor-scored failures occurred while immobilized in right arm spica casts (n=6; p=0.02) and left arm spica casts (n=5; p=0.049). The right arm spica cast had the highest subject-perceived difficulty (5.2±1.9; p<0.001). All forms of immobilization had significantly increased perceived difficulty compared to control, except for the left short arm splint (2.5±1.6; p>0.05). There was no significant difference in number of cones hit or driving time between control runs and runs with any type of immobilization. Drivers should use caution when wearing any of the forms of upper extremity immobilization tested in this study. All forms of immobilization, with exception of the left short arm splint significantly increased perceived driving difficulty. However, only the fiberglass spica casts (both left and right arm), significantly increased drive run failures due to loss of vehicle control. We recommend against driving when wearing a below-elbow fiberglass spica cast on either extremity. Copyright © 2016. Published by Elsevier Ltd.

Development of the performance confirmation program at YUCCA mountain, nevada

USGS Publications Warehouse

LeCain, G.D.; Barr, D.; Weaver, D.; Snell, R.; Goodin, S.W.; Hansen, F.D.

2006-01-01

The Yucca Mountain Performance Confirmation program consists of tests, monitoring activities, experiments, and analyses to evaluate the adequacy of assumptions, data, and analyses that form the basis of the conceptual and numerical models of flow and transport associated with a proposed radioactive waste repository at Yucca Mountain, Nevada. The Performance Confirmation program uses an eight-stage risk-informed, performance-based approach. Selection of the Performance Confirmation activities for inclusion in the Performance Confirmation program was done using a risk-informed performance-based decision analysis. The result of this analysis was a Performance Confirmation base portfolio that consists of 20 activities. The 20 Performance Confirmation activities include geologic, hydrologie, and construction/engineering testing. Some of the activities began during site characterization, and others will begin during construction, or post emplacement, and continue until repository closure.

Integrated bicarbonate-form ion exchange treatment and regeneration for DOC removal: Model development and pilot plant study.

PubMed

Hu, Yue; Boyer, Treavor H

2017-05-15

The application of bicarbonate-form anion exchange resin and sodium bicarbonate salt for resin regeneration was investigated in this research is to reduce chloride ion release during treatment and the disposal burden of sodium chloride regeneration solution when using traditional chloride-form ion exchange (IX). The target contaminant in this research was dissolved organic carbon (DOC). The performance evaluation was conducted in a completely mixed flow reactor (CMFR) IX configuration. A process model that integrated treatment and regeneration was investigated based on the characteristics of configuration. The kinetic and equilibrium experiments were performed to obtain required parameters for the process model. The pilot plant tests were conducted to validate the model as well as provide practical understanding on operation. The DOC concentration predicted by the process model responded to the change of salt concentration in the solution, and showed a good agreement with pilot plant data with less than 10% difference in terms of percentage removal. Both model predictions and pilot plant tests showed over 60% DOC removal by bicarbonate-form resin for treatment and sodium bicarbonate for regeneration, which was comparable to chloride-form resin for treatment and sodium chloride for regeneration. Lastly, the DOC removal was improved by using higher salt concentration for regeneration. Copyright © 2017 Elsevier Ltd. All rights reserved.

Unconventional nozzle tradeoff study. [space tug propulsion

NASA Technical Reports Server (NTRS)

Obrien, C. J.

1979-01-01

Plug cluster engine design, performance, weight, envelope, operational characteristics, development cost, and payload capability, were evaluated and comparisons were made with other space tug engine candidates using oxygen/hydrogen propellants. Parametric performance data were generated for existing developed or high technology thrust chambers clustered around a plug nozzle of very large diameter. The uncertainties in the performance prediction of plug cluster engines with large gaps between the modules (thrust chambers) were evaluated. The major uncertainty involves, the aerodynamics of the flow from discrete nozzles, and the lack of this flow to achieve the pressure ratio corresponding to the defined area ratio for a plug cluster. This uncertainty was reduced through a cluster design that consists of a plug contour that is formed from the cluster of high area ratio bell nozzles that have been scarfed. Light-weight, high area ratio, bell nozzles were achieved through the use of AGCarb (carbon-carbon cloth) nozzle extensions.

Robust tuning of robot control systems

NASA Technical Reports Server (NTRS)

Minis, I.; Uebel, M.

1992-01-01

The computed torque control problem is examined for a robot arm with flexible, geared, joint drive systems which are typical in many industrial robots. The standard computed torque algorithm is not directly applicable to this class of manipulators because of the dynamics introduced by the joint drive system. The proposed approach to computed torque control combines a computed torque algorithm with torque controller at each joint. Three such control schemes are proposed. The first scheme uses the joint torque control system currently implemented on the robot arm and a novel form of the computed torque algorithm. The other two use the standard computed torque algorithm and a novel model following torque control system based on model following techniques. Standard tasks and performance indices are used to evaluate the performance of the controllers. Both numerical simulations and experiments are used in evaluation. The study shows that all three proposed systems lead to improved tracking performance over a conventional PD controller.

Transfer Learning of Classification Rules for Biomarker Discovery and Verification from Molecular Profiling Studies

PubMed Central

Ganchev, Philip; Malehorn, David; Bigbee, William L.; Gopalakrishnan, Vanathi

2013-01-01

We present a novel framework for integrative biomarker discovery from related but separate data sets created in biomarker profiling studies. The framework takes prior knowledge in the form of interpretable, modular rules, and uses them during the learning of rules on a new data set. The framework consists of two methods of transfer of knowledge from source to target data: transfer of whole rules and transfer of rule structures. We evaluated the methods on three pairs of data sets: one genomic and two proteomic. We used standard measures of classification performance and three novel measures of amount of transfer. Preliminary evaluation shows that whole-rule transfer improves classification performance over using the target data alone, especially when there is more source data than target data. It also improves performance over using the union of the data sets. PMID:21571094

The hydrogen technology assessment, phase 1

NASA Technical Reports Server (NTRS)

Bain, Addison

1991-01-01

The purpose of this phase 1 report is to begin to form the information base of the economics and energy uses of hydrogen-related technologies on which the members of the National Hydrogen Association (NHA) can build a hydrogen vision of the future. The secondary goal of this report is the development of NHA positions on national research, development, and demonstration opportunities. The third goal, with the aid of the established hydrogen vision and NHA positions, is to evaluate ongoing federal research goals and activities. The evaluations will be performed in a manner that compares the costs associated with using systems that achieve those goals against the cost of performing those tasks today with fossil fuels. From this ongoing activity should emerge an NHA information base, one or more hydrogen visions of the future, and cost and performance targets for hydrogen applications to complete in the market place.

An assessment of coupling algorithms for nuclear reactor core physics simulations

DOE PAGES

Hamilton, Steven; Berrill, Mark; Clarno, Kevin; ...

2016-04-01

This paper evaluates the performance of multiphysics coupling algorithms applied to a light water nuclear reactor core simulation. The simulation couples the k-eigenvalue form of the neutron transport equation with heat conduction and subchannel flow equations. We compare Picard iteration (block Gauss–Seidel) to Anderson acceleration and multiple variants of preconditioned Jacobian-free Newton–Krylov (JFNK). The performance of the methods are evaluated over a range of energy group structures and core power levels. A novel physics-based approximation to a Jacobian-vector product has been developed to mitigate the impact of expensive on-line cross section processing steps. Furthermore, numerical simulations demonstrating the efficiency ofmore » JFNK and Anderson acceleration relative to standard Picard iteration are performed on a 3D model of a nuclear fuel assembly. Both criticality (k-eigenvalue) and critical boron search problems are considered.« less

An assessment of coupling algorithms for nuclear reactor core physics simulations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hamilton, Steven; Berrill, Mark; Clarno, Kevin

This paper evaluates the performance of multiphysics coupling algorithms applied to a light water nuclear reactor core simulation. The simulation couples the k-eigenvalue form of the neutron transport equation with heat conduction and subchannel flow equations. We compare Picard iteration (block Gauss–Seidel) to Anderson acceleration and multiple variants of preconditioned Jacobian-free Newton–Krylov (JFNK). The performance of the methods are evaluated over a range of energy group structures and core power levels. A novel physics-based approximation to a Jacobian-vector product has been developed to mitigate the impact of expensive on-line cross section processing steps. Furthermore, numerical simulations demonstrating the efficiency ofmore » JFNK and Anderson acceleration relative to standard Picard iteration are performed on a 3D model of a nuclear fuel assembly. Both criticality (k-eigenvalue) and critical boron search problems are considered.« less

An assessment of coupling algorithms for nuclear reactor core physics simulations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hamilton, Steven, E-mail: hamiltonsp@ornl.gov; Berrill, Mark, E-mail: berrillma@ornl.gov; Clarno, Kevin, E-mail: clarnokt@ornl.gov

This paper evaluates the performance of multiphysics coupling algorithms applied to a light water nuclear reactor core simulation. The simulation couples the k-eigenvalue form of the neutron transport equation with heat conduction and subchannel flow equations. We compare Picard iteration (block Gauss–Seidel) to Anderson acceleration and multiple variants of preconditioned Jacobian-free Newton–Krylov (JFNK). The performance of the methods are evaluated over a range of energy group structures and core power levels. A novel physics-based approximation to a Jacobian-vector product has been developed to mitigate the impact of expensive on-line cross section processing steps. Numerical simulations demonstrating the efficiency of JFNKmore » and Anderson acceleration relative to standard Picard iteration are performed on a 3D model of a nuclear fuel assembly. Both criticality (k-eigenvalue) and critical boron search problems are considered.« less

Evolving neural networks for strategic decision-making problems.

PubMed

Kohl, Nate; Miikkulainen, Risto

2009-04-01

Evolution of neural networks, or neuroevolution, has been a successful approach to many low-level control problems such as pole balancing, vehicle control, and collision warning. However, certain types of problems-such as those involving strategic decision-making-have remained difficult for neuroevolution to solve. This paper evaluates the hypothesis that such problems are difficult because they are fractured: The correct action varies discontinuously as the agent moves from state to state. A method for measuring fracture using the concept of function variation is proposed and, based on this concept, two methods for dealing with fracture are examined: neurons with local receptive fields, and refinement based on a cascaded network architecture. Experiments in several benchmark domains are performed to evaluate how different levels of fracture affect the performance of neuroevolution methods, demonstrating that these two modifications improve performance significantly. These results form a promising starting point for expanding neuroevolution to strategic tasks.

Traveling-wave piezoelectric linear motor part II: experiment and performance evaluation.

PubMed

Ting, Yung; Li, Chun-Chung; Chen, Liang-Chiang; Yang, Chieh-Min

2007-04-01

This article continues the discussion of a traveling-wave piezoelectric linear motor. Part I of this article dealt with the design and analysis of the stator of a traveling-wave piezoelectric linear motor. In this part, the discussion focuses on the structure and modeling of the contact layer and the carriage. In addition, the performance analysis and evaluation of the linear motor also are dealt with in this study. The traveling wave is created by stator, which is constructed by a series of bimorph actuators arranged in a line and connected to form a meander-line structure. Analytical and experimental results of the performance are presented and shown to be almost in agreement. Power losses due to friction and transmission are studied and found to be significant. Compared with other types of linear motors, the motor in this study is capable of supporting heavier loads and provides a larger thrust force.

HAS AN IMPORTANT TEST BEEN OVERLOOKED?: CLOSURE FLEXIBILITY IN SCHIZOPHRENIA

PubMed Central

Butler, Pamela D.; Schechter, Isaac; Revheim, Nadine; Silipo, Gail; Javitt, Daniel C.

2010-01-01

Deficits in visual processing are now recognized as a core feature of schizophrenia. In the 1940’s, Louis Thurstone developed a series of tests designed to evaluate specific aspects of visual perceptual processing including the Closure Flexibility Test (CFT), which was designed to measure “the ability to hold a configuration in mind despite distraction.” The present study evaluated patients’ performance on this task and its relationship to other tests of neuropsychological function, particularly to a measure of sustained visual attention. Thirty-nine patients with schizophrenia or schizoaffective disorder and 40 controls participated. The CFT was administered both in its original form (10 min) and also in a briefer form (3 min) in which only a portion of stimuli were given. Patients showed highly significant large effect size deficits on both the original (d=1.6) and brief (d=1.2) CFT. Between-group deficits in performance survived covariation for IQ. In addition, the CFT score was significantly related to performance on the MATRICS measure of attention/vigilance, the Continuous Performance Test-Identical Pairs version (CPT-IP). This correlation remained significant even after controlling for non-specific intercorrelations among neurocognitive measures. Results confirm the severity of early visual processing deficits in schizophrenia. In addition, the CFT is a brief, easy to administer alphabet-independent, paper-and-pencil test with established psychometric properties that may be useful as an index of the sustained visual attention construct in schizophrenia. PMID:20110157

A novel technique for micro-hole forming on skull with the assistance of ultrasonic vibration.

PubMed

Li, Zhe; Yang, Daoguo; Hao, Weidong; Wu, Tiecheng; Wu, Song; Li, Xiaoping

2016-04-01

Micro-hole opening on skull is technically challenging and is hard to realize by micro-drilling. Low-stiffness of the drill bit is a serious drawback in micro-drilling. To deal with this problem, a novel ultrasonic vibration assisted micro-hole forming technique has been developed. Tip geometry and vibration amplitude are two key factors affecting the performance of this hole forming technique. To investigate their effects, experiment was carried out with 300μm diameter tools of three different tip geometries at three different vibration amplitudes. Hole forming performance was evaluated by the required thrust force, dimensional accuracy, exit burr and micro-structure of bone tissue around the generated hole. Based on the findings from current study, the 60° conically tipped tool helps generate a micro-hole of better quality at a smaller thrust force, and it is more suitable for hole forming than the 120° conically tipped tool and the blunt tipped tool. As for the vibration amplitude, when a larger amplitude is used, a micro-hole of better quality and higher dimensional accuracy can be formed at a smaller thrust force. Findings from this study would lay a technical foundation for accurately generating a high-quality micro-hole on skull, which enables minimally invasive insertion of a microelectrode into brain for neural activity measuring. Copyright © 2015 Elsevier Ltd. All rights reserved.

Pros and cons of multistory RC tunnel-form (box-type) buildings

USGS Publications Warehouse

Kalkan, E.; Yuksel, S.B.

2008-01-01

Tunnel-form structural systems (i.e., box systems), having a load-carrying mechanism composed of reinforced concrete (RC) shear walls and slabs only, have been prevailingly utilized in the construction of multistory residential units. The superiority of tunnel-form buildings over their conventional counterparts stems from the enhanced earthquake resistance they provide, and the considerable speed and economy of their construction. During recent earthquakes in Turkey, they exhibited better seismic performance in contrast to the damaged condition of a number of RC frames and dual systems (i.e., RC frames with shear wall configurations). Thus the tunnel-form system has become a primary construction technique in many seismically active regions. In this paper, the strengths and weaknesses of tunnel-form buildings are addressed in terms of design considerations and construction applications. The impacts of shear wall reinforcement ratio and its detailing on system ductility, loadcarrying capacity and failure mechanism under seismic forces are evaluated at section and global system levels. Influences of tension/compression coupling and wall openings on the response are also discussed. Three-dimensional nonlinear finite element models, verified through comparisons with experimental results, were used for numerical assessments. Findings from this projection provide useful information on adequate vertical reinforcement ratio and boundary reinforcement to achieve enhanced performance of tunnel-form buildings under seismic actions. Copyright ?? 2007 John Wiley & Sons, Ltd.

Optimization of the Processing Parameters of High Temperature Superconducting Glass-Ceramics: Center Director's Discretionary Fund Final Report

NASA Technical Reports Server (NTRS)

Ethridge, E. C.; Kaukler, W. F.

1993-01-01

A number of promising glass forming compositions of high Tc superconducting Ba-Sr-Ca-Cu-O (BSCCO) materials were evaluated for their glass-ceramic crystallization ability. The BSCCO ceramics belonging to the class of superconductors in the Ba-Sr-Ca-Cu-O system were the focus of this study. By first forming the superconducting material as a glass, subsequent devitrification into the crystalline (glass-ceramic) superconductor can be performed by thermal processing of the glass preform body. Glass formability and phase formation were determined by a variety of methods in another related study. This study focused on the nucleation and crystallization of the materials. Thermal analysis during rapid cooling aids in the evaluation of nucleation and crystallization behavior. Melt viscosity is used to predict glass formation ability.

Synthesis, Characterization, and Biological Evaluation of certain 6-methyl-2(3H)-benzo-1, 3-thiazolyl-1’-ethylidene-2-(o, p- Substituted Acetophenones) Hydrazine Analogs

PubMed Central

Alang, G; Kaur, G; Kaur, R; Singh, A; Tiwari, R

2010-01-01

In the present study, five new derivatives (GG4 to GG8) of benzothiazoles were synthesized and evaluated against Staphylococcus aureus (MTCC 737), Pseudomonas aeruginosa (MTCC 424), Escherichia coli (MTCC 1687), and yeast-like fungi Candida tropicalis. p-Toluidine on treatment with ammonium thiocynate formed 2-benzothiazolamines (II), which on reaction with hydrazine hydrate formed a hydrazino derivative (III). Compounds GG4 to GG8 were synthesized by reacting the hydrazine derivative with different acetophenones. All the synthesized compounds were identified by IR and 1H-NMR, and antimicrobial activity was performed on the synthesized compounds. Presence of NO2, Br, OCH3, and Cl groups to the substituted benzothiazole enhanced the antibacterial and antifungal activities. PMID:21264101

Field and laboratory evaluations of commercial and next–generation alumina-forming austenitic foil for advanced recuperators

DOE PAGES

Pint, Bruce A.; Dryepondt, Sebastien N.; Brady, Michael P.; ...

2016-07-19

Alumina-forming austenitic (AFA) steels represent a new class of corrosion- and creep-resistant austenitic steels designed to enable higher temperature recuperators. Field trials are in progress for commercially rolled foil with widths over 39 cm. The first trial completed 3000 hrs in a microturbine recuperator with an elevated turbine inlet temperature and showed limited degradation. A longer microturbine trial is in progress. A third exposure in a larger turbine has passed 16,000 hrs. Furthermore, to reduce alloy cost and address foil fabrication issues with the initial AFA composition, several new AFA compositions are being evaluated in creep and laboratory oxidation testingmore » at 650–800 °C and the results compared to commercially fabricated AFA foil and conventional recuperator foil performance.« less

Does evaluative pressure make you less or more distractible? Role of top-down attentional control over response selection.

PubMed

Normand, Alice; Bouquet, Cédric A; Croizet, Jean-Claude

2014-06-01

People's ability to resist cognitive distraction is crucial in many situations. The present research examines individuals' resistance to attentional distraction under conditions of evaluative pressure. In a series of 4 studies, participants had to complete various attentional tasks while believing their intelligence was or was not under the scrutiny of an experimenter. Using a spatial cuing paradigm, Studies 1 through 3 demonstrated that feeling evaluated led participants to implement stronger feature-based attentional control, which resulted in more (or less) distraction when irrelevant information matched (did not match) the searched-for target. Study 4 ruled out the possibility that the above effects were due to voluntary shifts of attention and demonstrated that the control settings implemented under evaluative pressure resulted in stronger goal-contingent response priming. Thus, the way individuals relate to the task-the performance context in which they are-induces strong attentional selection biases. Altogether, the present findings highlight an overlooked form of top-down modulation of attention based on performance self-relevance. Implications for both the current models of attentional control and the current hypotheses on the impact of evaluative pressure on cognition, as well as the consequences for more complex performances, are discussed. PsycINFO Database Record (c) 2014 APA, all rights reserved.

An evaluation of performance-arts based HIV-prevention events in London with 13- 16-year-olds.

PubMed

Campbell, Tomás; Bath, Michael; Bradbear, Rachel; Cottle, Justine; Parrett, Neil

2009-09-01

The London borough of Newham is ethnically diverse and is one of the poorest regions in the UK. Rates of teenage pregnancy, sexually transmitted infections (STIs) and HIV are high compared to the rest of the country. One strand of the local school-based HIV-prevention programme for young people utilizes performance arts as a tool for HIV education and prevention. This study evaluated HIV knowledge, confidence and intention to use a condom in two groups of 13- 16-year-olds who had participated in performance-based events. Group 1 (n = 14) participated in a six-week programme of performance arts-based HIV education and prevention workshops, which culminated in a theatre-based performance. Group 2 (n = 65) were audience members who attended the performance. Participants completed a short questionnaire containing both qualitative and quantitative items. Qualitative data suggested that the participants had learned about condoms and their efficacy in preventing acquisition of HIV and sexually transmitted diseases. Quantitative results indicated that after participation in the events, respondents had more information about HIV and condom use; were more confident that they could insist on condom use with partners; and planned to use condoms in the future. There was a statistically significant difference between Groups 1 and 2 but because of the small numbers in Group 1 this result should be interpreted cautiously. Performance-based HIV-prevention activities may be a useful way to deliver HIV-prevention messages to young people. This evaluation will form the basis of a more systematic and robust evaluation of future events.

Effect of magnetic therapy on selected physical performances.

PubMed

Schall, David M; Ishee, Jimmy H; Titlow, Larry W

2003-05-01

The purpose of this study was to investigate the effects of magnetic therapy in the form of shoe insoles on vertical jump, bench squat, 40-yd dash, and a soccer-specific fitness test performance. Subjects were 14 collegiate male soccer players who were pretested, retested 3 weeks later, and then placed into a double-blind control or treatment group using a matching procedure. The control group received magnetic shoe insoles with a rating of 125 gauss, and the treatment group received insoles with a rating of 600 gauss. Subjects wore the insoles during practice and games for 7 weeks and were then retested. Results indicated significant differences among test scores during the 3 time periods but not between the treatment and control groups. There was a decline in 40-yd dash performance from the initial evaluation (5.10 seconds) to the final evaluation (5.08 seconds). There were no other significant differences. Within the limitations of the study, magnetic therapy did not improve physical performance.

Performance Evaluation of Relay Selection Schemes in Beacon-Assisted Dual-Hop Cognitive Radio Wireless Sensor Networks under Impact of Hardware Noises.

PubMed

Hieu, Tran Dinh; Duy, Tran Trung; Dung, Le The; Choi, Seong Gon

2018-06-05

To solve the problem of energy constraints and spectrum scarcity for cognitive radio wireless sensor networks (CR-WSNs), an underlay decode-and-forward relaying scheme is considered, where the energy constrained secondary source and relay nodes are capable of harvesting energy from a multi-antenna power beacon (PB) and using that harvested energy to forward the source information to the destination. Based on the time switching receiver architecture, three relaying protocols, namely, hybrid partial relay selection (H-PRS), conventional opportunistic relay selection (C-ORS), and best opportunistic relay selection (B-ORS) protocols are considered to enhance the end-to-end performance under the joint impact of maximal interference constraint and transceiver hardware impairments. For performance evaluation and comparison, we derive the exact and asymptotic closed-form expressions of outage probability (OP) and throughput (TP) to provide significant insights into the impact of our proposed protocols on the system performance over Rayleigh fading channel. Finally, simulation results validate the theoretical results.

Evaluation of the Psychometric Properties of the Asian Adolescent Depression Scale and Construction of a Short Form: An Item Response Theory Analysis.

PubMed

Lo, Barbara Chuen Yee; Zhao, Yue; Kwok, Alice Wai Yee; Chan, Wai; Chan, Calais Kin Yuen

2017-07-01

The present study applied item response theory to examine the psychometric properties of the Asian Adolescent Depression Scale and to construct a short form among 1,084 teenagers recruited from secondary schools in Hong Kong. Findings suggested that some items of the full form reflected higher levels of severity and were more discriminating than others, and the Asian Adolescent Depression Scale was useful in measuring a broad range of depressive severity in community youths. Differential item functioning emerged in several items where females reported higher depressive severity than males. In the short form construction, preliminary validation suggested that, relative to the 20-item full form, our derived short form offered significantly greater diagnostic performance and stronger discriminatory ability in differentiating depressed and nondepressed groups, and simultaneously maintained adequate measurement precision with a reduced response burden in assessing depression in the Asian adolescents. Cultural variance in depressive symptomatology and clinical implications are discussed.

Generalized Theory and Decoupled Evaluation Criteria for Unmatched Despreading of Modernized GNSS Signals

PubMed Central

Zhang, Jiayi; Yao, Zheng; Lu, Mingquan

2016-01-01

In order to provide better navigation service for a wide range of applications, modernized global navigation satellite systems (GNSS) employs increasingly advanced and complicated techniques in modulation and multiplexing of signals. This trend correspondingly increases the complexity of signal despreading at the receiver when matched receiving is used. Considering the numerous low-end receiver who can hardly afford such receiving complexity, it is feasible to apply some receiving strategies, which uses simplified forms of local despreading signals, which is termed unmatched despreading. However, the mismatch between local signal and received signal causes performance loss in code tracking, which is necessary to be considered in the theoretical evaluation methods of signals. In this context, we generalize the theoretical signal evaluation model for unmatched receiving. Then, a series of evaluation criteria are proposed, which are decoupled from unrelated influencing factors and concentrates on the key factors related to the signal and its receiving, thus better revealing the inherent performance of signals. The proposed evaluation criteria are used to study two GNSS signals, from which constructive guidance are derived for receivers and signal designer. PMID:27447648

Generalized Theory and Decoupled Evaluation Criteria for Unmatched Despreading of Modernized GNSS Signals.

PubMed

Zhang, Jiayi; Yao, Zheng; Lu, Mingquan

2016-07-20

In order to provide better navigation service for a wide range of applications, modernized global navigation satellite systems (GNSS) employs increasingly advanced and complicated techniques in modulation and multiplexing of signals. This trend correspondingly increases the complexity of signal despreading at the receiver when matched receiving is used. Considering the numerous low-end receiver who can hardly afford such receiving complexity, it is feasible to apply some receiving strategies, which uses simplified forms of local despreading signals, which is termed unmatched despreading. However, the mismatch between local signal and received signal causes performance loss in code tracking, which is necessary to be considered in the theoretical evaluation methods of signals. In this context, we generalize the theoretical signal evaluation model for unmatched receiving. Then, a series of evaluation criteria are proposed, which are decoupled from unrelated influencing factors and concentrates on the key factors related to the signal and its receiving, thus better revealing the inherent performance of signals. The proposed evaluation criteria are used to study two GNSS signals, from which constructive guidance are derived for receivers and signal designer.

Evaluation of RSRM case hardware fretting concerns

NASA Technical Reports Server (NTRS)

Swauger, Thomas R.

1990-01-01

Fretting corrosion was first noted on Shuttle flight STS-26. This flight was the first usage of the Redesigned Solid Rocket Motor (RSRM). The occurrence of fretting has since been observed on both the field and factory joints of the RSRM. Fretting is a form of corrosion that occurs at the interface between contacting, highly loaded, metal surfaces when exposed to slight relative vibratory motions. The engineering effort performed to evaluate the effect of fretting on the RSRM case hardware is summarized. Based on the results of this evaluation, several conclusions were made concerning flight safety. Also, recommendations were made concerning trending the effects of multiple generations of fretting damage.

Damage Tolerance Assessment Branch

NASA Technical Reports Server (NTRS)

Walker, James L.

2013-01-01

The Damage Tolerance Assessment Branch evaluates the ability of a structure to perform reliably throughout its service life in the presence of a defect, crack, or other form of damage. Such assessment is fundamental to the use of structural materials and requires an integral blend of materials engineering, fracture testing and analysis, and nondestructive evaluation. The vision of the Branch is to increase the safety of manned space flight by improving the fracture control and the associated nondestructive evaluation processes through development and application of standards, guidelines, advanced test and analytical methods. The Branch also strives to assist and solve non-aerospace related NDE and damage tolerance problems, providing consultation, prototyping and inspection services.

Interlaboratory Evaluation of in Vitro Cytotoxicity and Inflammatory Responses to Engineered Nanomaterials: The NIEHS Nano GO Consortium

PubMed Central

Xia, Tian; Hamilton, Raymond F.; Bonner, James C.; Crandall, Edward D.; Elder, Alison; Fazlollahi, Farnoosh; Girtsman, Teri A.; Kim, Kwang; Mitra, Somenath; Ntim, Susana A.; Orr, Galya; Tagmount, Mani; Taylor, Alexia J.; Telesca, Donatello; Tolic, Ana; Vulpe, Christopher D.; Walker, Andrea J.; Wang, Xiang; Witzmann, Frank A.; Wu, Nianqiang; Xie, Yumei; Zink, Jeffery I.; Nel, Andre

2013-01-01

Background: Differences in interlaboratory research protocols contribute to the conflicting data in the literature regarding engineered nanomaterial (ENM) bioactivity. Objectives: Grantees of a National Institute of Health Sciences (NIEHS)-funded consortium program performed two phases of in vitro testing with selected ENMs in an effort to identify and minimize sources of variability. Methods: Consortium program participants (CPPs) conducted ENM bioactivity evaluations on zinc oxide (ZnO), three forms of titanium dioxide (TiO2), and three forms of multiwalled carbon nanotubes (MWCNTs). In addition, CPPs performed bioassays using three mammalian cell lines (BEAS-2B, RLE-6TN, and THP-1) selected in order to cover two different species (rat and human), two different lung epithelial cells (alveolar type II and bronchial epithelial cells), and two different cell types (epithelial cells and macrophages). CPPs also measured cytotoxicity in all cell types while measuring inflammasome activation [interleukin-1β (IL-1β) release] using only THP-1 cells. Results: The overall in vitro toxicity profiles of ENM were as follows: ZnO was cytotoxic to all cell types at ≥ 50 μg/mL, but did not induce IL-1β. TiO2 was not cytotoxic except for the nanobelt form, which was cytotoxic and induced significant IL-1β production in THP-1 cells. MWCNTs did not produce cytotoxicity, but stimulated lower levels of IL-1β production in THP-1 cells, with the original MWCNT producing the most IL-1β. Conclusions: The results provide justification for the inclusion of mechanism-linked bioactivity assays along with traditional cytotoxicity assays for in vitro screening. In addition, the results suggest that conducting studies with multiple relevant cell types to avoid false-negative outcomes is critical for accurate evaluation of ENM bioactivity. PMID:23649538

Removal of Cesium From Acidic Radioactive Tank Waste Using IONSIV IE-911 (CST)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mann, Nicholas Robert; Todd, Terry Allen

2004-10-01

IONSIV IE-911, or the engineered form of crystalline silicotitanate (CST), manufactured by UOP Molecular Sieves, has been evaluated for the removal of cesium from Idaho National Engineering and Environmental Laboratory (INEEL) acidic radioactive tank waste. A series of batch contacts and column tests were performed by using three separate batches of CST. Batch contacts were performed to evaluate the concentration effects of nitric acid, sodium, and potassium ions on cesium sorption. Additional batch tests were performed to determine if americium, mercury, and plutonium would sorb onto IONSIV IE-911. An equilibrium isotherm was generated by using a concentrated tank waste simulant.more » Column tests using a 1.5 cm 3 column and flow rates of 3, 5, 10, 20, and 30 bed volumes (BV)/hr were performed to elucidate dynamic cesium sorption capacities and sorption kinetics. Additional experiments investigated the effect of CST batch and pretreatment on cesium sorption. The thermal stability of IONSIV IE-911 was evaluated by performing thermal gravimetric analysis/differential thermal analysis. Overall, IONSIV IE-911 was shown to be effective for cesium sorption from complex, highly acidic solutions; however, sorbent stability in these solutions may have a deleterious effect on cesium sorption.« less

Pediatric Eye Screening Instrumentation

NASA Astrophysics Data System (ADS)

Chen, Ying-Ling; Lewis, J. W. L.

2001-11-01

Computational evaluations are presented for binocular eye screening using the off-axis digital retinascope. The retinascope, such as the iScreen digital screening system, has been employed to perform pediatric binocular screening using a flash lamp and single-shot camera recording. The digital images are transferred electronically to a reading center for analysis. The method has been shown to detect refractive error, amblyopia, anisocoria, and ptosis. This computational work improves the performance of the system and forms the basis for automated data analysis. For this purpose, variouis published eye models are evaluated with simulated retinascope images. Two to ten million rays are traced in each image calculation. The poster will present the simulation results for a range of eye conditions of refractive error of -20 to +20 diopters with 0.5- to-1 diopter resolution, pupil size of 3 to 8 mm diameter (1-mm increment), and staring angle of 2 to 12 degree (2-degree increment). The variation of the results with the system conditions such as the off-axis distance of light source and the shutter size of camera are also evaluated. The quantitative analysis for each eye’s and system’s condition is then performed to obtain parameters for automatic reading. The summary of the system performance is given and performance-enhancement design modifications are presented.

Application Of Ti-Based Self-Formation Barrier Layers To Cu Dual-Damascene Interconnects

NASA Astrophysics Data System (ADS)

Ito, Kazuhiro; Ohmori, Kazuyuki; Kohama, Kazuyuki; Mori, Kenichi; Maekawa, Kazuyoshi; Asai, Koyu; Murakami, Masanori

2010-11-01

Cu interconnects have been used extensively in ULSI devices. However, large resistance-capacitance delay and poor device reliability have been critical issues as the device feature size has reduced to nanometer scale. In order to achieve low resistance and high reliability of Cu interconnects, we have applied a thin Ti-based self-formed barrier (SFB) using Cu(Ti) alloy seed to 45nm-node dual damascene interconnects and evaluated its performance. The line resistance and via resistance decreased significantly, compared with those of conventional Ta/TaN barriers. The stress migration performance was also drastically improved using the SFB process. A performance of time dependent dielectric breakdown revealed superior endurance. These results suggest that the Ti-based SFB process is one of the most promising candidates for advanced Cu interconnects. TEM and X-ray photoelectron spectroscopy observations for characterization of the Ti-based SFB structure were also performed. The Ti-based SFB consisted of mainly amorphous Ti oxides. Amorphous or crystalline Ti compounds such as TiC, TiN, and TiSi formed beneath Cu alloy films, and the formation varied with dielectric.

Terahertz pulsed imaging as an advanced characterisation tool for film coatings--a review.

PubMed

Haaser, Miriam; Gordon, Keith C; Strachan, Clare J; Rades, Thomas

2013-12-05

Solid dosage forms are the pharmaceutical drug delivery systems of choice for oral drug delivery. These solid dosage forms are often coated to modify the physico-chemical properties of the active pharmaceutical ingredients (APIs), in particular to alter release kinetics. Since the product performance of coated dosage forms is a function of their critical coating attributes, including coating thickness, uniformity, and density, more advanced quality control techniques than weight gain are required. A recently introduced non-destructive method to quantitatively characterise coating quality is terahertz pulsed imaging (TPI). The ability of terahertz radiation to penetrate many pharmaceutical materials enables structural features of coated solid dosage forms to be probed at depth, which is not readily achievable with other established imaging techniques, e.g. near-infrared (NIR) and Raman spectroscopy. In this review TPI is introduced and various applications of the technique in pharmaceutical coating analysis are discussed. These include evaluation of coating thickness, uniformity, surface morphology, density, defects and buried structures as well as correlation between TPI measurements and drug release performance, coating process monitoring and scale up. Furthermore, challenges and limitations of the technique are discussed. Copyright © 2013 Elsevier B.V. All rights reserved.

Automatic loudness control in short-form content for broadcasting.

PubMed

Pires, Leandro da S; Vieira, Maurílio N; Yehia, Hani C

2017-03-01

During the early years of the International Telecommunication Union (ITU) loudness calculation standard for sound broadcasting [ITU-R (2006), Rec. BS Series, 1770], the need for additional loudness descriptors to evaluate short-form content, such as commercials and live inserts, was identified. This work proposes a loudness control scheme to prevent loudness jumps, which can bother audiences. It employs short-form content audio detection and dynamic range processing methods for the maximum loudness level criteria. Detection is achieved by combining principal component analysis for dimensionality reduction and support vector machines for binary classification. Subsequent processing is based on short-term loudness integrators and Hilbert transformers. The performance was assessed using quality classification metrics and demonstrated through a loudness control example.

Microfog lubricant application system for advanced turbine engine components, phase 3. [wetting characteristics and deposit forming tendencies of lubricants

NASA Technical Reports Server (NTRS)

Petrucco, R. J.; Leonardi, S. J.

1973-01-01

The wetting characteristics and deposit forming tendencies of a series of lubricants were evaluated using a microfog jet delivery system to wet a flat heated rotating disc. The performances of the nine lubricants are discussed in terms of the various testing parameters which include temperature, disc speed and lubricant gas flow rates. Also discussed are the heat transfer characteristics of two of the lubricants on that same plane disc specimen. The wetting characteristics and heat transfer characteristics of one of the lubricants on a complex disc simulating bearing geometry are also discussed.

Radiation damage in cubic ZrO 2 and yttria-stabilized zirconia from molecular dynamics simulations

DOE PAGES

Aidhy, Dilpuneet S.; Zhang, Yanwen; Weber, William J.

2014-11-20

Here, we perform molecular dynamics simulation on cubic ZrO 2 and yttria-stabilized zirconia (YSZ) to elucidate defect cluster formation resulting from radiation damage, and evaluate the impact of Y-dopants. Interstitial clusters composed of split-interstitial building blocks, i.e., Zr-Zr or Y-Zr are formed. Moreover, oxygen vacancies control cation defect migration; in their presence, Zr interstitials aggregate to form split-interstitials whereas in their absence Zr interstitials remain immobile, as isolated single-interstitials. Y-doping prevents interstitial cluster formation due to sequestration of oxygen vacancies.

Evaluation of a Short-Form of the Berg Card Sorting Test

PubMed Central

Fox, Christopher J.; Mueller, Shane T.; Gray, Hilary M.; Raber, Jacob; Piper, Brian J.

2013-01-01

The Psychology Experimental Building Language http://pebl.sourceforge.net/ Berg Card Sorting Test is an open-source neurobehavioral test. Participants (N = 207, ages 6 to 74) completed the Berg Card Sorting Test. Performance on the first 64 trials were isolated and compared to that on the full-length (128 trials) test. Strong correlations between the short and long forms (total errors: r = .87, perseverative response: r = .83, perseverative errors r = .77, categories completed r = .86) support the Berg Card Sorting Test-64 as an abbreviated alternative for the full-length executive function test. PMID:23691107

A 4-year clinical evaluation of direct composite build-ups for space closure after orthodontic treatment.

PubMed

Demirci, Mustafa; Tuncer, Safa; Öztaş, Evren; Tekçe, Neslihan; Uysal, Ömer

2015-12-01

To evaluate the medium-term clinical performance of direct composite build-ups for diastema closures and teeth recontouring using a nano and a nanohybrid composite in combination with three- or two-step etch-and-rinse adhesives following treatment with fixed orthodontic appliances. A total of 30 patients (mean age, 19.5 years) received 147 direct composite additions for teeth recontouring and diastema closures. A nano and a nanohybrid composite (Filtek Supreme XT and CeramX Duo) were bonded to tooth structure by using a three-step (Scotchbond Multipurpose) or a two-step (XP Bond) etch and rinse adhesive. Ten out of 147 composite build-ups (composite addition) constituted tooth recontouring cases, and the remaining 137 constituted diastema closure cases. The restorations were evaluated by two experienced, calibrated examiners according to modified Ryge criteria at the following time intervals: baseline, 1, 2, 3, and 4 years. The 4-year survival rates were 92.8 % for Filtek Supreme XT/Scotchbond Multi-Purpose Plus and 93 % for CeramX Duo/XP Bond. Only ten restorations failed (5 Filtek Supreme XT and 5 CeramX Duo). Statistical analysis revealed no significant differences between the two composite-adhesive combinations with respect to color match, marginal discoloration, wear/loss of anatomical form, caries formation, marginal adaptation, and surface texture on comparing the five time periods (baseline, 1, 2, 3, and 4 years) The 4-year survival rates in the present study were favorable. The restorations exhibited excellent scores with regard to color match, marginal adaptation, surface texture, marginal discoloration, wear/loss of anatomical form, and caries formation, after 4 years of clinical evaluation. Clinical relevance An alternative clinical approach for correcting discrepancies in tooth size and form, such as performing direct composite restorations following fixed orthodontic treatment, may be an excellent and minimally invasive treatment.

Evaluation of Apical Vapor Lock Formation and comparative Evaluation of its Elimination using Three different Techniques: An in vitro Study.

PubMed

Agarwal, Anand; Deore, Rahul B; Rudagi, Kavitarani; Nanda, Zinnie; Baig, Mirza Osman; Fareez, Md Adil

2017-09-01

The aim of this study was (i) to evaluate the formation of air bubbles in the apical region of root canal (apical vapor lock) during syringe irrigation, using cone beam computed tomography (CBCT) and (ii) comparative evaluation of the elimination of an established vapor lock by EndoActivator, ultrasonics, and manual dynamic agitation (MDA), using CBCT. A total of 60 extracted human single-rooted teeth were equally divided into three groups of 20 teeth each. The samples were decoronated 17 mm from the apex, cleaned, and shaped to size F4 Protaper using 3% sodium hypochlorite. Samples were irrigated with 3% sodium hypochlorite + cesium chloride radiopaque dye, and preoperative CBCT images were obtained. After formation of apical vapor lock in the scanned teeth, EndoActivator (group I), passive ultrasonic irrigation (group II), and MDA with K-file (group III) were performed and the teeth were again placed in CBCT scanner and results analyzed using the chi-square test. The apical vapor lock was formed in all the samples. Out of the 20 teeth in each group, the apical vapor lock was eliminated in 18 samples of EndoActivator group (90%), 16 samples of ultrasonic group (80%), while it was eliminated in 10 samples by MDA (50%). It is concluded that (1) apical vapor lock is consistently formed during endodontic irrigation in closed canal systems and (2) sonic activation performs better than the ultrasonics and MDA in eliminating the apical vapor lock, with statistically significant difference between all the three groups (p < 0.05). The results suggest that the apical vapor lock (dead water zone) is consistently formed during routine endodontic irrigation which impedes irrigant penetration till the working length, thereby leading to inefficient debridement. Hence, to eliminate this vapor lock, techniques, such as sonics or ultrasonics should be used along with the irrigant after shaping and cleaning of the root canal.

Performance evaluation of inpatient service in Beijing: a horizontal comparison with risk adjustment based on Diagnosis Related Groups.

PubMed

Jian, Weiyan; Huang, Yinmin; Hu, Mu; Zhang, Xiumei

2009-04-30

The medical performance evaluation, which provides a basis for rational decision-making, is an important part of medical service research. Current progress with health services reform in China is far from satisfactory, without sufficient regulation. To achieve better progress, an effective tool for evaluating medical performance needs to be established. In view of this, this study attempted to develop such a tool appropriate for the Chinese context. Data was collected from the front pages of medical records (FPMR) of all large general public hospitals (21 hospitals) in the third and fourth quarter of 2007. Locally developed Diagnosis Related Groups (DRGs) were introduced as a tool for risk adjustment and performance evaluation indicators were established: Charge Efficiency Index (CEI), Time Efficiency Index (TEI) and inpatient mortality of low-risk group cases (IMLRG), to reflect respectively work efficiency and medical service quality. Using these indicators, the inpatient services' performance was horizontally compared among hospitals. Case-mix Index (CMI) was used to adjust efficiency indices and then produce adjusted CEI (aCEI) and adjusted TEI (aTEI). Poisson distribution analysis was used to test the statistical significance of the IMLRG differences between different hospitals. Using the aCEI, aTEI and IMLRG scores for the 21 hospitals, Hospital A and C had relatively good overall performance because their medical charges were lower, LOS shorter and IMLRG smaller. The performance of Hospital P and Q was the worst due to their relatively high charge level, long LOS and high IMLRG. Various performance problems also existed in the other hospitals. It is possible to develop an accurate and easy to run performance evaluation system using Case-Mix as the tool for risk adjustment, choosing indicators close to consumers and managers, and utilizing routine report forms as the basic information source. To keep such a system running effectively, it is necessary to improve the reliability of clinical information and the risk-adjustment ability of Case-Mix.

[Pay for performance explained by transaction costs theory].

PubMed

Gorbaneff, Yuri; Cortes, Ariel; Torres, Sergio; Yepes, Francisco

2011-01-01

To evaluate the ability of transaction costs theory to explain incentives in the health care chain. We performed a case study of CPS, a health insurance company in Bogota (Colombia), which preferred not to publish its name. CPS moves in the environment of high transaction costs and uses the hybrid form of governance at the outpatient level. Incentive intensity, administrative control and the contract all agree with the theory. At the hospital level, the market is used, despite greater uncertainty. Because of the discrete form (1.0) of the incentives and the absence of administrative control, it is difficult for CPS to relate payment to hospital performance. Transaction costs theory explains the configuration of incentives. Another contribution made by this theory to the literature is the criterion to differentiate between the market and the hybrid. We propose that the market uses discrete-type (1.0) incentives, while the hybrid uses continuous, commission-like incentives. Copyright © 2011 SESPAS. Published by Elsevier Espana. All rights reserved.

Beamforming Based Full-Duplex for Millimeter-Wave Communication

PubMed Central

Liu, Xiao; Xiao, Zhenyu; Bai, Lin; Choi, Jinho; Xia, Pengfei; Xia, Xiang-Gen

2016-01-01

In this paper, we study beamforming based full-duplex (FD) systems in millimeter-wave (mmWave) communications. A joint transmission and reception (Tx/Rx) beamforming problem is formulated to maximize the achievable rate by mitigating self-interference (SI). Since the optimal solution is difficult to find due to the non-convexity of the objective function, suboptimal schemes are proposed in this paper. A low-complexity algorithm, which iteratively maximizes signal power while suppressing SI, is proposed and its convergence is proven. Moreover, two closed-form solutions, which do not require iterations, are also derived under minimum-mean-square-error (MMSE), zero-forcing (ZF), and maximum-ratio transmission (MRT) criteria. Performance evaluations show that the proposed iterative scheme converges fast (within only two iterations on average) and approaches an upper-bound performance, while the two closed-form solutions also achieve appealing performances, although there are noticeable differences from the upper bound depending on channel conditions. Interestingly, these three schemes show different robustness against the geometry of Tx/Rx antenna arrays and channel estimation errors. PMID:27455256

Dehazed Image Quality Assessment by Haze-Line Theory

NASA Astrophysics Data System (ADS)

Song, Yingchao; Luo, Haibo; Lu, Rongrong; Ma, Junkai

2017-06-01

Images captured in bad weather suffer from low contrast and faint color. Recently, plenty of dehazing algorithms have been proposed to enhance visibility and restore color. However, there is a lack of evaluation metrics to assess the performance of these algorithms or rate them. In this paper, an indicator of contrast enhancement is proposed basing on the newly proposed haze-line theory. The theory assumes that colors of a haze-free image are well approximated by a few hundred distinct colors, which form tight clusters in RGB space. The presence of haze makes each color cluster forms a line, which is named haze-line. By using these haze-lines, we assess performance of dehazing algorithms designed to enhance the contrast by measuring the inter-cluster deviations between different colors of dehazed image. Experimental results demonstrated that the proposed Color Contrast (CC) index correlates well with human judgments of image contrast taken in a subjective test on various scene of dehazed images and performs better than state-of-the-art metrics.

Education Research: Bias and poor interrater reliability in evaluating the neurology clinical skills examination

PubMed Central

Schuh, L A.; London, Z; Neel, R; Brock, C; Kissela, B M.; Schultz, L; Gelb, D J.

2009-01-01

Objective: The American Board of Psychiatry and Neurology (ABPN) has recently replaced the traditional, centralized oral examination with the locally administered Neurology Clinical Skills Examination (NEX). The ABPN postulated the experience with the NEX would be similar to the Mini-Clinical Evaluation Exercise, a reliable and valid assessment tool. The reliability and validity of the NEX has not been established. Methods: NEX encounters were videotaped at 4 neurology programs. Local faculty and ABPN examiners graded the encounters using 2 different evaluation forms: an ABPN form and one with a contracted rating scale. Some NEX encounters were purposely failed by residents. Cohen’s kappa and intraclass correlation coefficients (ICC) were calculated for local vs ABPN examiners. Results: Ninety-eight videotaped NEX encounters of 32 residents were evaluated by 20 local faculty evaluators and 18 ABPN examiners. The interrater reliability for a determination of pass vs fail for each encounter was poor (kappa 0.32; 95% confidence interval [CI] = 0.11, 0.53). ICC between local faculty and ABPN examiners for each performance rating on the ABPN NEX form was poor to moderate (ICC range 0.14-0.44), and did not improve with the contracted rating form (ICC range 0.09-0.36). ABPN examiners were more likely than local examiners to fail residents. Conclusions: There is poor interrater reliability between local faculty and American Board of Psychiatry and Neurology examiners. A bias was detected for favorable assessment locally, which is concerning for the validity of the examination. Further study is needed to assess whether training can improve interrater reliability and offset bias. GLOSSARY ABIM = American Board of Internal Medicine; ABPN = American Board of Psychiatry and Neurology; CI = confidence interval; HFH = Henry Ford Hospital; ICC = intraclass correlation coefficients; IM = internal medicine; mini-CEX = Mini-Clinical Evaluation Exercise; NEX = Neurology Clinical Skills Examination; RITE = residency inservice training examination; UC = University of Cincinnati; UM = University of Michigan; USF = University of South Florida. PMID:19605769

Neural network-based systems for handprint OCR applications.

PubMed

Ganis, M D; Wilson, C L; Blue, J L

1998-01-01

Over the last five years or so, neural network (NN)-based approaches have been steadily gaining performance and popularity for a wide range of optical character recognition (OCR) problems, from isolated digit recognition to handprint recognition. We present an NN classification scheme based on an enhanced multilayer perceptron (MLP) and describe an end-to-end system for form-based handprint OCR applications designed by the National Institute of Standards and Technology (NIST) Visual Image Processing Group. The enhancements to the MLP are based on (i) neuron activations functions that reduce the occurrences of singular Jacobians; (ii) successive regularization to constrain the volume of the weight space; and (iii) Boltzmann pruning to constrain the dimension of the weight space. Performance characterization studies of NN systems evaluated at the first OCR systems conference and the NIST form-based handprint recognition system are also summarized.

Development of high temperature strain gages

NASA Technical Reports Server (NTRS)

Lemcoe, M. M.

1973-01-01

High temperature electric resistance wire strain gages were developed and evaluated for use at temperatures exceeding 922 K (1200 F). A special high temperature strain gage alloy (Fe-25Cr-7.5A1), designated BCL-3, was used to fabricate the gages. Pertinent gage characteristics were determined at temperatures up to 1255 K (1800 F). The results of the evaluation were reported in graphical and tabular form. It was concluded that the gages will perform satisfactorily at temperatures to at least 1089 K (1500 F) for at least one hour.

Single and combined effects of peppermint and thyme essential oils on productive performance, egg quality traits, and blood parameters of laying hens reared under cold stress condition (6.8 ± 3 °C)

NASA Astrophysics Data System (ADS)

Akbari, Mohsen; Torki, Mehran; Kaviani, Keyomars

2016-03-01

This study was conducted to evaluate the effects of adding peppermint essential oil (PEO), thyme essential oil (TEO), or their combination to diet on productive performance, egg quality traits, and blood parameters of laying hens reared under cold stress condition (6.8 ± 3 °C). Feed intake (FI), feed conversion ratio (FCR), egg weight (EW), egg production (EP), and egg mass (EM) were evaluated during the 56-day trial period using 120 Lohmann LSL-lite laying hens. Significant interactions between PEO and TEO on FCR, EP, and EM were observed ( P < 0.05). The EP and EM increased, whereas FCR decreased ( P < 0.05) in the hens fed the diets supplemented by the combined form of PEO and TEO compared to those fed the basal diet. Also, increased EW and FI were observed in the laying hens fed the diet added by PEO compared to the birds fed the basal diet. There were significant interactions between PEO and TEO on the serum level of cholesterol, shell thickness, and Hough unit of egg ( P < 0.05), so that serum content of cholesterol decreased, but egg shell thickness and Hough unit increased in the hens fed the diet supplemented by the combined form of PEO and TEO compared to those fed the basal diet. From the results of the present experiment, it can be concluded that diet supplementation by combined form of PEO and TEO could have beneficial effects on performance parameters of hens reared under cold stress condition.

Bone regeneration performance of surface-treated porous titanium.

PubMed

Amin Yavari, Saber; van der Stok, Johan; Chai, Yoke Chin; Wauthle, Ruben; Tahmasebi Birgani, Zeinab; Habibovic, Pamela; Mulier, Michiel; Schrooten, Jan; Weinans, Harrie; Zadpoor, Amir Abbas

2014-08-01

The large surface area of highly porous titanium structures produced by additive manufacturing can be modified using biofunctionalizing surface treatments to improve the bone regeneration performance of these otherwise bioinert biomaterials. In this longitudinal study, we applied and compared three types of biofunctionalizing surface treatments, namely acid-alkali (AcAl), alkali-acid-heat treatment (AlAcH), and anodizing-heat treatment (AnH). The effects of treatments on apatite forming ability, cell attachment, cell proliferation, osteogenic gene expression, bone regeneration, biomechanical stability, and bone-biomaterial contact were evaluated using apatite forming ability test, cell culture assays, and animal experiments. It was found that AcAl and AnH work through completely different routes. While AcAl improved the apatite forming ability of as-manufactured (AsM) specimens, it did not have any positive effect on cell attachment, cell proliferation, and osteogenic gene expression. In contrast, AnH did not improve the apatite forming ability of AsM specimens but showed significantly better cell attachment, cell proliferation, and expression of osteogenic markers. The performance of AlAcH in terms of apatite forming ability and cell response was in between both extremes of AnH and AsM. AcAl resulted in significantly larger volumes of newly formed bone within the pores of the scaffold as compared to AnH. Interestingly, larger volumes of regenerated bone did not translate into improved biomechanical stability as AnH exhibited significantly better biomechanical stability as compared to AcAl suggesting that the beneficial effects of cell-nanotopography modulations somehow surpassed the benefits of improved apatite forming ability. In conclusion, the applied surface treatments have considerable effects on apatite forming ability, cell attachment, cell proliferation, and bone ingrowth of the studied biomaterials. The relationship between these properties and the bone-implant biomechanics is, however, not trivial. Copyright © 2014 Elsevier Ltd. All rights reserved.

Performance evaluation of medical records departments by analytical hierarchy process (AHP) approach in the selected hospitals in Isfahan : medical records dep. & AHP.

PubMed

Ajami, Sima; Ketabi, Saeedeh

2012-06-01

Medical Records Department (MRD) is an important unit for evaluating and planning of care services. The goal of this study is evaluating the performance of the Medical Records Departments (MRDs) of the selected hospitals in Isfahan, Iran by using Analytical Hierarchy Process (AHP). This was an analytic of cross-sectional study that was done in spring 2008 in Isfahan, Iran. The statistical population consisted of MRDs of Alzahra, Kashani and Khorshid Hospitals in Isfahan. Data were collected by forms and through brainstorm technique. To analyze and perform AHP, Expert Choice software was used by researchers. Results were showed archiving unit has received the largest importance weight with respect to information management. However, on customer aspect admission unit has received the largest weight. Ordering weights of Medical Records Departments' Alzahra, Kashani and Khorshid Hospitals in Isfahan were with 0.394, 0.342 and 0.264 respectively. It is useful for managers to allocate and prioritize resources according to AHP technique for ranking at the Medical Records Departments.

Hexavalent Chrome Free Coatings for Electronics: Electromagnetic Interference (EMI) Shielding Effectiveness (SE)

NASA Technical Reports Server (NTRS)

Kessel, Kurt R.

2016-01-01

Determine the suitability of trivalent chromium conversion coatings that meet the requirements of MIL-DTL-5541, Type II, for use in applications where high-frequency electrical performance is important. Evaluate the ability of hexavalent chrome free pretreated aluminum to form adequate EMI seals, and maintain that seal while being subjected to harsh environmental conditions. Assess the performance of trivalent chromium pretreatments against a known control hexavalent chrome pretreatment before and after they have been exposed to a set of environmental conditions. It is known that environmental testing causes a decrease in shielding effectiveness when hexavalent chrome pretreatments are used (Alodine 1200s). Need to determine how shielding effectiveness will be affected with the use of hexavalent chrome free pretreatments. Performance will be assessed by evaluating shielding effectiveness (SE) test data from a variety of test samples comprised of different aluminum types and/or conversion coatings. The formation of corrosion will be evaluated between the mating surfaces and gasket to assess the corrosion resistant properties of the pretreatments, comparing the hexavalent control to the hexavalent chrome free pretreatments.

A flight evaluation of VTOL jet transport under visual and simulated instrument conditions

NASA Technical Reports Server (NTRS)

Holzhauser, C. A.; Morello, S. A.; Innis, R. C.; Patton, J. M., Jr.

1972-01-01

A flight investigation was performed with the Dornier DO-31 VTOL to evaluate the performance, handling qualities, and operating characteristics that are considered to be important in the operation of a commerical VTOL transport in the terminal area. The DO-31, a 20,000 kilogram transport, has a mixed jet propulsion system; main engines with nozzles deflect from a cruise to a hover position, and vertical lift engines operated below 170 knots. This VTOL mode incorporates pitch and roll attitude and yaw rate stabilization. The tests concentrated on the transition, approach, and vertical landing. The mixed jet propulsion system provided a large usable performance envelope that enabled simulated IFR approaches to be made on 7 deg and 12 deg glide slopes. In these approaches management of thrust magnitude and direction was a primary problem, and some form of integrating the controls will be necessary. The handling qualities evaluation pointed out the need for additional research of define flight path criteria. The aircraft had satisfactory control and stability in hover out of ground effect. The recirculation effects in vertical landing were large below 15 meters.

Evaluative stimulus (in)congruency impacts performance in an unrelated task: evidence for a resource-based account of evaluative priming.

PubMed

Gast, Anne; Werner, Benedikt; Heitmann, Christina; Spruyt, Adriaan; Rothermund, Klaus

2014-01-01

In two experiments, we assessed evaluative priming effects in a task that was unrelated to the congruent or incongruent stimulus pairs. In each trial, participants saw two valent (positive or negative) pictures that formed evaluatively congruent or incongruent stimulus pairs and a letter that was superimposed on the second picture. Different from typical evaluative priming studies, participants were not required to respond to the second of the valent stimuli, but asked to categorize the letter that was superimposed on the second picture. We assessed the impact of the evaluative (in)congruency of the two pictures on the performance in responding to the letter. In addition, we manipulated attention to the evaluative dimension by asking participants in one experimental group to respond to the valence of the pictures on a subset of trials (evaluative task condition). In both experiments, we found evaluative priming effects in letter categorization responses: Participants categorized the letter faster (and sometimes more correctly) in trials with congruent picture-pairs. These effects were present only in the evaluative task condition. These findings can be explained with different resource-based accounts of evaluative priming and the additional assumption that attention to valence is necessary for evaluative congruency to affect processing resources. According to resource-based accounts valence-incongruent trials require more cognitive resources than valence-congruent trials (e.g., Hermans, Van den Broeck, & Eelen, 1998).

Universality, correlations, and rankings in the Brazilian universities national admission examinations

NASA Astrophysics Data System (ADS)

da Silva, Roberto; Lamb, Luis C.; Barbosa, Marcia C.

2016-09-01

We analyze the scores obtained by students who have taken the ENEM examination, The Brazilian High School National Examination which is used in the admission process at Brazilian universities. The average high schools scores from different disciplines are compared through the Pearson correlation coefficient. The results show a very large correlation between the performance in the different school subjects. Even though the students' scores in the ENEM form a Gaussian due to the standardization, we show that the high schools' scores form a bimodal distribution that cannot be used to evaluate and compare students performance over time. We also show that this high schools distribution reflects the correlation between school performance and the economic level (based on the average family income) of the students. The ENEM scores are compared with a Brazilian non standardized exam, the entrance examination from the Universidade Federal do Rio Grande do Sul. The analysis of the performance of the same individuals in both tests shows that the two tests not only select different abilities, but also lead to the admission of different sets of individuals. Our results indicate that standardized tests might be an interesting tool to compare performance of individuals over the years, but not of institutions.

Letter Report: LAW Simulant Development for Cast Stone Screening Test

DOE Office of Scientific and Technical Information (OSTI.GOV)

Russell, Renee L.; Westsik, Joseph H.; Swanberg, David J.

2013-03-27

More than 56 million gallons of radioactive and hazardous waste are stored in 177 underground storage tanks at the U.S. Department of Energy’s (DOE’s) Hanford Site in southeastern Washington State. The Hanford Tank Waste Treatment and Immobilization Plant (WTP) is being constructed to treat the wastes and immobilize them in a glass waste form. The WTP includes a pretreatment facility to separate the wastes into a small volume of high-level waste (HLW) containing most of the radioactivity and a larger volume of low-activity waste (LAW) containing most of the nonradioactive chemicals. The HLW will be converted to glass in themore » HLW vitrification facility for ultimate disposal at an offsite federal repository. At least a portion (~35%) of the LAW will be converted to glass in the LAW vitrification facility and will be disposed of onsite at the Integrated Disposal Facility (IDF). The pretreatment and HLW vitrification facilities will have the capacity to treat and immobilize the wastes destined for each facility. However, a second facility will be needed for the expected volume of additional LAW requiring immobilization. A cementitious waste form known as Cast Stone is being considered to provide the required additional LAW immobilization capacity. The Cast Stone waste form must be acceptable for disposal in the IDF. The Cast Stone waste form and immobilization process must be tested to demonstrate that the final Cast Stone waste form can comply with waste acceptance criteria for the IDF disposal facility and that the immobilization processes can be controlled to consistently provide an acceptable waste form product. Further, the waste form must be tested to provide the technical basis for understanding the long term performance of the waste form in the IDF disposal environment. These waste form performance data are needed to support risk assessment and performance assessment (PA) analyses of the long-term environmental impact of the waste disposal in the IDF. A testing program was developed in fiscal year (FY) 2012 describing in some detail the work needed to develop and qualify Cast Stone as a waste form for the solidification of Hanford LAW (Westsik et al. 2012). Included within Westsik et al. (2012) is a section on the near-term needs to address Tri-Party Agreement Milestone M-062-40ZZ. The objectives of the testing program to be conducted in FY 2013 and FY 2014 are to: • Determine an acceptable formulation for the LAW Cast Stone waste form. • Evaluate sources of dry materials for preparing the LAW Cast Stone. • Demonstrate the robustness of the Cast Stone waste form for a range of LAW compositions. • Demonstrate the robustness of the formulation for variability in the Cast Stone process. • Provide Cast Stone contaminant release data for PA and risk assessment evaluations. The first step in determining an acceptable formulation for the LAW Cast Stone waste form is to conduct screening tests to examine expected ranges in pretreated LAW composition, waste stream concentrations, dry-materials sources, and mix ratios of waste feed to dry blend. A statistically designed test matrix will be used to evaluate the effects of these key parameters on the properties of the Cast Stone as it is initially prepared and after curing. The second phase of testing will focus on selection of a baseline Cast Stone formulation for LAW and demonstrating that Cast Stone can meet expected waste form requirements for disposal in the IDF. It is expected that this testing will use the results of the screening tests to define a smaller suite of tests to refine the composition of the baseline Cast Stone formulation (e.g. waste concentration, water to dry mix ratio, waste loading).« less

Systematic content evaluation and review of measurement properties of questionnaires for measuring self-reported fatigue among older people.

PubMed

Egerton, Thorlene; Riphagen, Ingrid I; Nygård, Arnhild J; Thingstad, Pernille; Helbostad, Jorunn L

2015-09-01

The assessment of fatigue in older people requires simple and user-friendly questionnaires that capture the phenomenon, yet are free from items indistinguishable from other disorders and experiences. This study aimed to evaluate the content, and systematically review and rate the measurement properties of self-report questionnaires for measuring fatigue, in order to identify the most suitable questionnaires for older people. This study firstly involved identification of questionnaires that purport to measure self-reported fatigue, and evaluation of the content using a rating scale developed for the purpose from contemporary understanding of the construct. Secondly, for the questionnaires that had acceptable content, we identified studies reporting measurement properties and rated the methodological quality of those studies according to the COSMIN system. Finally, we extracted and synthesised the results of the studies to give an overall rating for each questionnaire for each measurement property. The protocol was registered with PROSPERO (CRD42013005589). Of the 77 identified questionnaires, twelve were selected for review after content evaluation. Methodological quality varied, and there was a lack of information on measurement error and responsiveness. The PROMIS-Fatigue item bank and short forms perform the best. The FACIT-Fatigue scale, Parkinsons Fatigue Scale, Perform Questionnaire, and Uni-dimensional Fatigue Impact Scale also perform well and can be recommended. Minor modifications to improve performance are suggested. Further evaluation of unresolved measurement properties, particularly with samples including older people, is needed for all the recommended questionnaires.

Scientific Reputation and "The Golden Standards": Quality Management System Impact and the Teaching-Research Nexus

ERIC Educational Resources Information Center

Moraru, Luminita

2012-01-01

In the academic environment the reputation is linked to research performance. However, the questions "what reputation actually is, how it is formed and which are the best ways to measure it?" still remain and they raise tension and confusion between academics. The evaluation methods tend to over emphasise research and fail to address the…

Traffic Management for Satellite-ATM Networks

NASA Technical Reports Server (NTRS)

Goyal, Rohit; Jain, Raj; Fahmy, Sonia; Vandalore, Bobby; Goyal, Mukul

1998-01-01

Various issues associated with "Traffic Management for Satellite-ATM Networks" are presented in viewgraph form. Specific topics include: 1) Traffic management issues for TCP/IP based data services over satellite-ATM networks; 2) Design issues for TCP/IP over ATM; 3) Optimization of the performance of TCP/IP over ATM for long delay networks; and 4) Evaluation of ATM service categories for TCP/IP traffic.

Examining the Use of Deep Touch Pressure to Improve the Educational Performance of Students with Disabilities

ERIC Educational Resources Information Center

Losinski, Mickey; Sanders, Sara A.; Wiseman, Nicole M.

2016-01-01

The current meta-analysis examined the use of deep touch pressure (DTP; e.g., weighted vests) with students with disabilities. DTP is a form of sensory integration therapy that is currently used extensively in schools with students with autism and other disabilities. Each study in the analysis was evaluated using the Council for Exceptional…

Using Eye Tracking as a Tool to Teach Informatics Students the Importance of User Centered Design

ERIC Educational Resources Information Center

Gelderblom, Helene; Adebesin, Funmi; Brosens, Jacques; Kruger, Rendani

2017-01-01

In this article the authors describe how they incorporate eye tracking in a human-computer interaction (HCI) course that forms part of a postgraduate Informatics degree. The focus is on an eye tracking assignment that involves student groups performing usability evaluation studies for real world clients. Over the past three years the authors have…

Tartaric Acid as a Non-toxic and Environmentally-Friendly Anti-scaling Material for Using in Cooling Water Systems: Electrochemical and Surface Studies

NASA Astrophysics Data System (ADS)

Asghari, Elnaz; Gholizadeh-Khajeh, Maryam; Ashassi-Sorkhabi, Habib

2016-10-01

Because of the major limitations in drinking water resources, the industries need to use unprocessed water sources for their cooling systems; these water resources contain major amount of hardening cations. So, mineral scales are formed in cooling water systems during the time and cause major problems. The use of green anti-scaling materials such as carboxylic acids is considered due to their low risks of environmental pollution. In the present work, the scale inhibition performance of tartaric acid as a green organic material was evaluated. Chemical screening tests, cathodic and anodic voltammetry measurements and electrochemical impedance spectroscopy (EIS), field emission scanning electron microscopy (FESEM), energy-dispersive x-ray and x-ray diffraction, were used for the evaluation of the scale inhibition performance. The results showed that tartaric acid can prevent calcium carbonate precipitation significantly. The hard water solution with 2.0 mM of tartaric acid indicated the highest scale inhibition efficiency (ca. 68%). The voltammetry, EIS and FESEM results verified that tartaric acid can form smooth and homogeneous film on steel surface through formation of Fe(III)-tartrate complexes and retard the local precipitation of calcium carbonate deposits.

An Appraisal of Performance Appraisal Summary Results of a Large Scale Study.

DTIC Science & Technology

1981-05-01

subordinate to M 6 28 66 put in more effort S 9 28 62 Mutual planning of future M 22 22 58 work goas S 9 29 62 M = PerrcenLtage of manager resposes S...some), subordinates believe it forms a larger Both managors and stibordinates agree that self -appraisal is not a frequontly used basis of evaluation...made M=2.0 S=3.0 1 Self -appraisal completed before the interview M=2.5 S=2.4 -20- 𔃻________________ SECTION 4 EVALUATI NG PERFORMANCE APPRA I SAL

Performance analysis and simulation of the SPS reference phase control system

NASA Technical Reports Server (NTRS)

Lindsey, W. C.; Chie, C. M.

1980-01-01

The major elements required in the operation of an SPS which employs retrodirectivity as a means of pointing the beam to Earth include the spacetenna, the rectenna, and the pilot signal transmitter. The phase control system is faced with several problems: (1) path delay variations due to imperfect SPS circular orbits; (2) ionospheric effects; (3) initial phase beam forming; (4) beam pointing; (5) beam safing; (6) high power phase noise effects; and (7) interference. The use of SOLARISM, a computer program to select pilot signal parameters and evaluate SPS performance is described.

Phased array performance evaluation with photoelastic visualization

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ginzel, Robert; Dao, Gavin

2014-02-18

New instrumentation and a widening range of phased array transducer options are affording the industry a greater potential. Visualization of the complex wave components using the photoelastic system can greatly enhance understanding of the generated signals. Diffraction, mode conversion and wave front interaction, together with beam forming for linear, sectorial and matrix arrays, will be viewed using the photoelastic system. Beam focus and steering performance will be shown with a range of embedded and surface targets within glass samples. This paper will present principles and sound field images using this visualization system.

Development of Tasks and Evaluation of a Prototype Forceps for NOTES

PubMed Central

Addis, Matthew; Aguirre, Milton; Haluck, Randy; Matthew, Abraham; Pauli, Eric; Gopal, Jegan

2012-01-01

Background and Objectives: Few standardized testing procedures exist for instruments intended for Natural Orifice Translumenal Endoscopic Surgery. These testing procedures are critical for evaluating surgical skills and surgical instruments to ensure sufficient quality. This need is widely recognized by endoscopic surgeons as a major hurdle for the advancement of Natural Orifice Translumenal Endoscopic Surgery. Methods: Beginning with tasks currently used to evaluate laparoscopic surgeons and instruments, new tasks were designed to evaluate endoscopic surgical forceps instruments. Results: Six tasks have been developed from existing tasks, adapted and modified for use with endoscopic instruments, or newly designed to test additional features of endoscopic forceps. The new tasks include the Fuzzy Ball Task, Cup Drop Task, Ring Around Task, Material Pull Task, Simulated Biopsy Task, and the Force Gauge Task. These tasks were then used to evaluate the performance of a new forceps instrument designed at Pennsylvania State University. Conclusions: The need for testing procedures for the advancement of Natural Orifice Translumenal Endoscopic Surgery has been addressed in this work. The developed tasks form a basis for not only testing new forceps instruments, but also for evaluating individual performance of surgical candidates with endoscopic forceps instruments. PMID:22906337

The Accreditation Experience of Clinical Laboratories and Blood Banks in Mexico.

PubMed

Quintana, Sandra

2015-11-01

The accreditation of clinical laboratories and blood banks based on ISO 15189 is now being consolidated in Mexico, and is coordinated by the Mexican accreditation entity innovative strategies, A.C. (ema) and supported by the activities of the committee of clinical laboratories and blood banks. The active participation in working groups formed by the technical committee of clinical laboratories and blood banks in specific areas, has contributed to the formulation of technical documents and criteria of evaluation that strengthen the current accreditation scheme. The national registry of evaluation (PNE) consists of technical experts and evaluators from different disciplines of clinical laboratory; the evaluators actively participate in accreditation assessment, with an ultimate goal to receive training and feedback for continuous improvement of its own performance.

Intertester and intratester reliability of movement control tests on the hip for patients with hip osteoarthritis.

PubMed

Lenzlinger-Asprion, Rahel; Keller, Niculina; Meichtry, André; Luomajoki, Hannu

2017-01-31

Hip joint complaints are a problem associated with increasing age and impair the mobility of a large section of the elderly population. Reliable and valid tests are necessary for a thorough investigation of a joint. A fundamental function of the hip joint is movement control and a test of this function forms a part of the standard examination. Until now there have been few scientific studies which specifically investigate the reliability of measurement tests of movement control of the hip joint. The aim of this study was to examine the intratester and intertester reliability of the movement control tests of the hip joint which are in use in current clinical practice. Sixteen participants with hip joint complaints and 14 without hip joint impairment were recruited. All participants performed five active movement control tests for the hip joint and were video filmed whilst performing these tests. These films formed the basis for the evaluation and were assessed by two independent physiotherapists. For the intertester and intratester reliability calculations specially set weighted kappa values and the calculated percentages were used. The intertester reliability of the five examined movement control tests of the hip joint showed good to almost perfect values (weighted kappa (wk) = 0.56-0.87). The intratester reliability of the more experienced evaluator A was better in regards to the less experienced evaluator B (average wk = 0.62 vs 0.38). The visual evaluation of movement control tests of the hip joint is especially reliable when carried out by an experienced evaluator. 4 out of 5 tests also showed good results for intertester reliability and support their use in clinical practice.

Histomorphometric analysis of newly formed bone after maxillary sinus floor augmentation using ground cortical bone allograft and internal collagen membrane.

PubMed

Kolerman, Roni; Tal, Haim; Moses, Ofer

2008-11-01

Maxillary sinus floor augmentation is the treatment of choice when insufficient alveolar bone height prevents placement of standard dental implants in the posterior edentulous maxilla. The objective of this study was to histologically and histometrically evaluate new bone formation after maxillary sinus floor augmentation using ground cortical bone allograft. Mineralized freeze-dried bone allograft (FDBA) was used for sinus floor augmentation. After 9 months, 23 biopsies were taken from 19 patients. Routine histologic processing using hematoxylin and eosin and Mallory staining was performed. Histologic evaluation revealed a mean of 29.1% newly formed bone, 51.9% connective tissue, and 19% residual graft material. Graft particles were mainly in close contact with newly formed bone, primarily with features of mature bone with numerous osteocytes, and, to a lesser extent, with marrow spaces. There was no evidence of acute inflammatory infiltrate. FDBA is biocompatible and osteoconductive when used in maxillary sinus-augmentation procedures, and it may be used safely without interfering with the normal reparative bone process.

Ultrasmall Peptides Self-Assemble into Diverse Nanostructures: Morphological Evaluation and Potential Implications

PubMed Central

Lakshmanan, Anupama; Hauser, Charlotte A.E.

2011-01-01

In this study, we perform a morphological evaluation of the diverse nanostructures formed by varying concentration and amino acid sequence of a unique class of ultrasmall self-assembling peptides. We modified these peptides by replacing the aliphatic amino acid at the C-aliphatic terminus with different aromatic amino acids. We tracked the effect of introducing aromatic residues on self-assembly and morphology of resulting nanostructures. Whereas aliphatic peptides formed long, helical fibers that entangle into meshes and entrap >99.9% water, the modified peptides contrastingly formed short, straight fibers with a flat morphology. No helical fibers were observed for the modified peptides. For the aliphatic peptides at low concentrations, different supramolecular assemblies such as hollow nanospheres and membrane blebs were found. Since the ultrasmall peptides are made of simple, aliphatic amino acids, considered to have existed in the primordial soup, study of these supramolecular assemblies could be relevant to understanding chemical evolution leading to the origin of life on Earth. In particular, we propose a variety of potential applications in bioengineering and nanotechnology for the diverse self-assembled nanostructures. PMID:22016623

Development of a Standard Test Scenario to Evaluate the Effectiveness of Portable Fire Extinguishers on Lithium-ion Battery Fires

NASA Technical Reports Server (NTRS)

Juarez, Alfredo; Harper, Susan A.; Hirsch, David B.; Carriere, Thierry

2013-01-01

Many sources of fuel are present aboard current spacecraft, with one especially hazardous source of stored energy: lithium ion batteries. Lithium ion batteries are a very hazardous form of fuel due to their self-sustaining combustion once ignited, for example, by an external heat source. Batteries can become extremely energetic fire sources due to their high density electrochemical energy content that may, under duress, be violently converted to thermal energy and fire in the form of a thermal runaway. Currently, lithium ion batteries are the preferred types of batteries aboard international spacecraft and therefore are routinely installed, collectively forming a potentially devastating fire threat to a spacecraft and its crew. Currently NASA is developing a fine water mist portable fire extinguisher for future use on international spacecraft. As its development ensues, a need for the standard evaluation of various types of fire extinguishers against this potential threat is required to provide an unbiased means of comparing between fire extinguisher technologies and ranking them based on performance.

Fabrication of micro metallic valve and pump

NASA Astrophysics Data System (ADS)

Yang, Ming; Kabasawa, Yasunari; Ito, Kuniyoshi

2010-03-01

Fabrication of micro devices by using micro metal forming was proposed by the authors. We developed a desktop servo-press machine with precise tooling system. Precise press forming processes including micro forging and micro joining has been carried out in a progressive die. In this study, micro metallic valve and pump were fabricated by using the precise press forming. The components are made of sheet metals, and assembled in to a unit in the progressive die. A micro check-valve with a diameter of 3mm and a length of 3.2mm was fabricated, and the property of flow resistance was evaluated. The results show that the check valve has high property of leakage proof. Since the valve is a unit parts with dimensions of several millimeters, it has advantage to be adapted to various pump design. Here, two kinds of micro pumps with the check-valves were fabricated. One is diaphragm pump actuated by vibration of the diaphragm, and another is tube-shaped pump actuated by resonation. The flow quantities of the pumps were evaluated and the results show that both of the pumps have high pumping performance.

Stress and Sealing Performance Analysis of Containment Vessel

DOE Office of Scientific and Technical Information (OSTI.GOV)

WU, TSU-TE

2005-05-24

This paper presents a numerical technique for analyzing the containment vessel subjected to the combined loading of closure-bolt torque and internal pressure. The detailed stress distributions in the O-rings generated by both the torque load and the internal pressure can be evaluated by using this method. Consequently, the sealing performance of the O-rings can be determined. The material of the O-rings can be represented by any available constitutive equation for hyperelastic material. In the numerical calculation of this paper, the form of the Mooney-Rivlin strain energy potential is used. The technique treats both the preloading process of bolt tightening andmore » the application of internal pressure as slow dynamic loads. Consequently, the problem can be evaluated using explicit numerical integration scheme.« less

Determining team cognition from delay analysis using cross recurrence plot.

PubMed

Hajari, Nasim; Cheng, Irene; Bin Zheng; Basu, Anup

2016-08-01

Team cognition is an important factor in evaluating and determining team performance. Forming a team with good shared cognition is even more crucial for laparoscopic surgery applications. In this study, we analyzed the eye tracking data of two surgeons during a laparoscopic simulation operation, then performed Cross Recurrence Analysis (CRA) on the recorded data to study the delay behaviour for good performer and poor performer teams. Dual eye tracking data for twenty two dyad teams were recorded during a laparoscopic task and then the teams were divided into good performer and poor performer teams based on the task times. Eventually we studied the delay between two team members for good and poor performer teams. The results indicated that the good performer teams show a smaller delay comparing to poor performer teams. This study is compatible with gaze overlap analysis between team members and therefore it is a good evidence of shared cognition between team members.

Improving prediction of heterodimeric protein complexes using combination with pairwise kernel.

PubMed

Ruan, Peiying; Hayashida, Morihiro; Akutsu, Tatsuya; Vert, Jean-Philippe

2018-02-19

Since many proteins become functional only after they interact with their partner proteins and form protein complexes, it is essential to identify the sets of proteins that form complexes. Therefore, several computational methods have been proposed to predict complexes from the topology and structure of experimental protein-protein interaction (PPI) network. These methods work well to predict complexes involving at least three proteins, but generally fail at identifying complexes involving only two different proteins, called heterodimeric complexes or heterodimers. There is however an urgent need for efficient methods to predict heterodimers, since the majority of known protein complexes are precisely heterodimers. In this paper, we use three promising kernel functions, Min kernel and two pairwise kernels, which are Metric Learning Pairwise Kernel (MLPK) and Tensor Product Pairwise Kernel (TPPK). We also consider the normalization forms of Min kernel. Then, we combine Min kernel or its normalization form and one of the pairwise kernels by plugging. We applied kernels based on PPI, domain, phylogenetic profile, and subcellular localization properties to predicting heterodimers. Then, we evaluate our method by employing C-Support Vector Classification (C-SVC), carrying out 10-fold cross-validation, and calculating the average F-measures. The results suggest that the combination of normalized-Min-kernel and MLPK leads to the best F-measure and improved the performance of our previous work, which had been the best existing method so far. We propose new methods to predict heterodimers, using a machine learning-based approach. We train a support vector machine (SVM) to discriminate interacting vs non-interacting protein pairs, based on informations extracted from PPI, domain, phylogenetic profiles and subcellular localization. We evaluate in detail new kernel functions to encode these data, and report prediction performance that outperforms the state-of-the-art.

[Relationship between crown form of upper central incisors and papilla filling in Chinese Han-nationality youth].

PubMed

Yang, X; Le, D; Zhang, Y L; Liang, L Z; Yang, G; Hu, W J

2016-10-18

To explore a crown form classification method for upper central incisor which is more objective and scientific than traditional classification method based on the standardized photography technique. To analyze the relationship between crown form of upper central incisors and papilla filling in periodontally healthy Chinese Han-nationality youth. In the study, 180 periodontally healthy Chinese youth ( 75 males, and 105 females ) aged 20-30 (24.3±4.5) years were included. With the standardized upper central incisor photography technique, pictures of 360 upper central incisors were obtained. Each tooth was classified as triangular, ovoid or square by 13 experienced specialist majors in prothodontics independently and the final classification result was decided by most evaluators in order to ensure objectivity. The standardized digital photo was also used to evaluate the gingival papilla filling situation. The papilla filling result was recorded as present or absent according to naked eye observation. The papilla filling rates of different crown forms were analyzed. Statistical analyses were performed with SPSS 19.0. The proportions of triangle, ovoid and square forms of upper central incisor in Chinese Han-nationality youth were 31.4% (113/360), 37.2% (134/360) and 31.4% (113/360 ), respectively, and no statistical difference was found between the males and females. Average κ value between each two evaluators was 0.381. Average κ value was raised up to 0.563 when compared with the final classification result. In the study, 24 upper central incisors without contact were excluded, and the papilla filling rates of triangle, ovoid and square crown were 56.4% (62/110), 69.6% (87/125), 76.2% (77/101) separately. The papilla filling rate of square form was higher (P=0.007). The proportion of clinical crown form of upper central incisor in Chinese Han-nationality youth is obtained. Compared with triangle form, square form is found to favor a gingival papilla that fills the interproximal embrasure space. The consistency of the present classification method for upper central incisor is not satisfying, which indicates that a new classification method, more scientific and objective than the present one, is to be found.

The On-line Waste Library (OWL): Usage and Inventory Status Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sassani, David; Jang, Je-Hun; Mariner, Paul

The Waste Form Disposal Options Evaluation Report (SNL 2014) evaluated disposal of both Commercial Spent Nuclear Fuel (CSNF) and DOE-managed HLW and Spent Nuclear Fuel (DHLW and DSNF) in the variety of disposal concepts being evaluated within the Used Fuel Disposition Campaign. That work covered a comprehensive inventory and a wide range of disposal concepts. The primary goal of this work is to evaluate the information needs for analyzing disposal solely of a subset of those wastes in a Defense Repository (DRep; i.e., those wastes that are either defense related, or managed by DOE but are not commercial in origin).more » A potential DRep also appears to be safe in the range of geologic mined repository concepts, but may have different concepts and features because of the very different inventory of waste that would be included. The focus of this status report is to cover the progress made in FY16 toward: (1) developing a preliminary DRep included inventory for engineering/design analyses; (2) assessing the major differences of this included inventory relative to that in other analyzed repository systems and the potential impacts to disposal concepts; (3) designing and developing an on-line waste library (OWL) to manage the information of all those wastes and their waste forms (including CSNF if needed); and (4) constraining post-closure waste form degradation performance for safety assessments of a DRep. In addition, some continuing work is reported on identifying potential candidate waste types/forms to be added to the full list from SNL (2014 – see Table C-1) which also may be added to the OWL in the future. The status for each of these aspects is reported herein.« less

Orodispersible films and tablets with prednisolone microparticles.

PubMed

Brniak, Witold; Maślak, Ewelina; Jachowicz, Renata

2015-07-30

Orodispersible tablets (ODTs) and orodispersible films (ODFs) are solid oral dosage forms disintegrating or dissolving rapidly when placed in the mouth. One of the main issues related to their preparation is an efficient taste masking of a bitter drug substance. Therefore, the aim of this study was to prepare and evaluate the microparticles intended to mask a bitter taste of the prednisolone and use them in further preparation of two orodispersible dosage forms. Microparticles based on the Eudragit E PO or E 100 as a taste-masking agent were prepared with spray-drying technique. Tablets containing microparticles, co-processed ODT excipient Pharmaburst, and lubricant were directly compressed with single-punch tablet press. Orodispersible films were prepared by casting polymeric solutions of hydroxypropyl methylcellulose containing uniformly dispersed microparticles. Physicochemical properties of microparticles were evaluated, as well as mechanical properties analysis, disintegration time measurements and dissolution tests were performed for prepared dosage forms. Both formulations showed good mechanical resistance while maintaining excellent disintegration properties. The dissolution studies showed good masking properties of microparticles with Eudragit E 100. The amount of prednisolone released during the first minute in phosphate buffer 6.8 was around 0.1%. After incorporation into the orodispersible forms, the amount of released prednisolone increased significantly. It was probably the effect of faster microparticles wetting in orodispersible forms and their partial destruction by compression force during tableting process. Copyright © 2015 Elsevier B.V. All rights reserved.

Feasibility studies of time-like proton electromagnetic form factors at $$\\overline{\\rm P}$$ANDA at FAIR

DOE Office of Scientific and Technical Information (OSTI.GOV)

Singh, B.; Erni, W.; Krusche, B.

Simulation results for future measurements of electromagnetic proton form factors atmore » $$\\overline{\\rm P}$$ANDA (FAIR) within the PandaRoot software framework are reported. The statistical precision with which the proton form factors can be determined is estimated. The signal channel p¯p → e +e – is studied on the basis of two different but consistent procedures. The suppression of the main background channel, i.e. p¯p → π +π –, is studied. Furthermore, the background versus signal efficiency, statistical and systematical uncertainties on the extracted proton form factors are evaluated using two different procedures. The results are consistent with those of a previous simulation study using an older, simplified framework. Furthermore, a slightly better precision is achieved in the PandaRoot study in a large range of momentum transfer, assuming the nominal beam conditions and detector performance.« less

Feasibility studies of time-like proton electromagnetic form factors at $$\\overline{\\rm P}$$ANDA at FAIR

DOE PAGES

Singh, B.; Erni, W.; Krusche, B.; ...

2016-10-28

Simulation results for future measurements of electromagnetic proton form factors atmore » $$\\overline{\\rm P}$$ANDA (FAIR) within the PandaRoot software framework are reported. The statistical precision with which the proton form factors can be determined is estimated. The signal channel p¯p → e +e – is studied on the basis of two different but consistent procedures. The suppression of the main background channel, i.e. p¯p → π +π –, is studied. Furthermore, the background versus signal efficiency, statistical and systematical uncertainties on the extracted proton form factors are evaluated using two different procedures. The results are consistent with those of a previous simulation study using an older, simplified framework. Furthermore, a slightly better precision is achieved in the PandaRoot study in a large range of momentum transfer, assuming the nominal beam conditions and detector performance.« less

Five-year evaluation of a low-shrinkage Silorane resin composite material: a randomized clinical trial.

PubMed

Schmidt, Malene; Dige, Irene; Kirkevang, Lise-Lotte; Vaeth, Michael; Hørsted-Bindslev, Preben

2015-03-01

The aim of the present study was to investigate the clinical performance of a low-shrinkage silorane-based composite material (Filtek™ Silorane, 3 M-Espe) by comparing it with a methacrylate-based composite material (Ceram•X™, Dentsply DeTrey). A number of 72 patients (158 restorations) participated in the study. After 5 years, a total of 107 restorations (52 Filtek™ Silorane, 55 Ceram•X™) in 48 patients were evaluated. Only class II restorations were included. All the restorations were placed by the same dentist, and the restorations were scored by one experienced dentist/evaluator. Materials were applied following the manufacturer's instructions. The primary outcome was marginal adaptation. Secondary outcomes were: marginal discoloration, approximal contact, anatomic form, fracture, secondary caries, and hypersensitivity. After 5 years, no statistically significant differences between the two materials were found in marginal adaptation either occlusally (p = 0.96) or approximally (p = 0.62). No statistically significant differences were found between the two materials in terms of approximal contact, anatomic form, fractures, or discoloration. Secondary caries was found in two teeth (Filtek™ Silorane). One tooth showed hypersensitivity (Ceram•X™). Restorations of both materials were clinically acceptable after 5 years. This study did not find any advantage of the silorane-based composite over the methacrylate-based composite, which indicates that the low-shrinkage of Filtek™ Silorane may not be a determinant factor for clinical success in class II cavities. This paper is the first to evaluate the 5-year clinical performance of a low-shrinkage composite material.

Development of a solid self-microemulsifying drug delivery system (SMEDDS) for solubility enhancement of naproxen.

PubMed

Čerpnjak, Katja; Zvonar, Alenka; Vrečer, Franc; Gašperlin, Mirjana

2015-01-01

Comparative evaluation of liquid and solid self-microemulsifying drug delivery systems (SMEDDS) as promising approaches for solubility enhancement. The aim of this work was to develop, characterize, and evaluate a solid SMEDDS prepared via spray-drying of a liquid SMEDDS based on Gelucire® 44/14 to improve the solubility and dissolution rate of naproxen. Various oils and co-surfactants in combination with Gelucire® 44/14 were evaluated during excipient selection study, solubility testing, and construction of (pseudo)ternary diagrams. The selected system was further evaluated for naproxen solubility, self-microemulsification ability, and in vitro dissolution of naproxen. In addition, its transformation into a solid SMEDDS by spray-drying using maltodextrin as a solid carrier was performed. Scanning electron microscopy (SEM), differential scanning calorimetry (DSC), and X-ray diffraction (XRD) were used to evaluate the physical characteristics of the solid SMEDDS obtained. The selected formulation of SMEDDS was comprised of Miglyol 812®, Peceol™, Gelucire® 44/14, and Solutol® HS 15. The liquid and solid SMEDDS formed a microemulsion after dilution with comparable average droplet size and exhibited uniform droplet size distribution. In the solid SMEDDS, liquid SMEDDS was adsorbed onto the surface of maltodextrin and formed smooth granular particles with the encapsulated drug predominantly in a dissolved state and partially in an amorphous state. Overall, incorporation of naproxen in SMEDDS, either liquid or solid, resulted in improved solubility and dissolution rate compared to pure naproxen. This study indicates that a liquid and solid SMEDDS is a strategy for solubility enhancement in the future development of orally delivered dosage forms.

Effect of mutation at the interface of Trp-repressor dimeric protein: a steered molecular dynamics simulation.

PubMed

Miño, German; Baez, Mauricio; Gutierrez, Gonzalo

2013-09-01

The strength of key interfacial contacts that stabilize protein-protein interactions have been studied by computer simulation. Experimentally, changes in the interface are evaluated by generating specific mutations at one or more points of the protein structure. Here, such an evaluation is performed by means of steered molecular dynamics and use of a dimeric model of tryptophan repressor and in-silico mutants as a test case. Analysis of four particular cases shows that, in principle, it is possible to distinguish between wild-type and mutant forms by examination of the total energy and force-extension profiles. In particular, detailed atomic level structural analysis indicates that specific mutations at the interface of the dimeric model (positions 19 and 39) alter interactions that appear in the wild-type form of tryptophan repressor, reducing the energy and force required to separate both subunits.

Form and function in the Lower Palaeolithic: history, progress, and continued relevance.

PubMed

Key, Alastair; Stephen, Lycett

2017-12-30

Percussively flaked stone artefacts constitute a major source of evidence relating to hominin behavioural strategies and are, essentially, a product or byproduct of a past individual's decision to create a tool with respect to some broader goal. Moreover, it has long been noted that both differences and recurrent regularities exist within and between Palaeolithic stone artefact forms. Accordingly, archaeologists have frequently drawn links between form and functionality, with functional objectives and performance often being regarded consequential to a stone tool's morphological properties. Despite these factors, extensive reviews of the related concepts of form and function with respect to the Lower Palaeolithic remain surprisingly sparse. We attempt to redress this issue. First we stress the historical place of form-function concepts, and their role in establishing basic ideas that echo to this day. We then highlight methodological and conceptual progress in determining artefactual function in more recent years. Thereafter, we evaluate four specific issues that are of direct consequence for evaluating the ongoing relevance of form-function concepts, especially with respect to their relevance for understanding human evolution more generally. Our discussion highlights specifically how recent developments have been able to build on a long historical legacy, and demonstrate that direct, indirect, experimental, and evolutionary perspectives intersect in crucial ways, with each providing specific but essential insights for ongoing questions. We conclude by emphasising that our understanding of these issues and their interaction, has been, and will be, essential to accurately interpret the Lower Palaeolithic archaeological record, tool-form related behaviours of Lower Palaeolithic hominins, and their consequences for (and relationship to) wider questions of human evolution.

A closed-form solution to tensor voting: theory and applications.

PubMed

Wu, Tai-Pang; Yeung, Sai-Kit; Jia, Jiaya; Tang, Chi-Keung; Medioni, Gérard

2012-08-01

We prove a closed-form solution to tensor voting (CFTV): Given a point set in any dimensions, our closed-form solution provides an exact, continuous, and efficient algorithm for computing a structure-aware tensor that simultaneously achieves salient structure detection and outlier attenuation. Using CFTV, we prove the convergence of tensor voting on a Markov random field (MRF), thus termed as MRFTV, where the structure-aware tensor at each input site reaches a stationary state upon convergence in structure propagation. We then embed structure-aware tensor into expectation maximization (EM) for optimizing a single linear structure to achieve efficient and robust parameter estimation. Specifically, our EMTV algorithm optimizes both the tensor and fitting parameters and does not require random sampling consensus typically used in existing robust statistical techniques. We performed quantitative evaluation on its accuracy and robustness, showing that EMTV performs better than the original TV and other state-of-the-art techniques in fundamental matrix estimation for multiview stereo matching. The extensions of CFTV and EMTV for extracting multiple and nonlinear structures are underway.

The Impact of Service Dogs on Engagement in Occupation among Females with Mobility Impairments: A Qualitative Descriptive Study

PubMed Central

Herlache-Pretzer, Ellen; Winkle, Melissa Y.; Csatari, Rachel; Kolanowski, Alyssa; Londry, Amy; Dawson, Rachel

2017-01-01

It is becoming more common for people with disabilities to procure service dogs as a form of assistive technology (AT). However, there is little qualitative research examining the impact of service dogs on engagement in valued daily activities (occupations) among persons with mobility impairments. This study used a qualitative descriptive methodology to learn about the experiences of four female service dog owners with mobility impairments, with a focus on the impact of service dog use on the performance of daily occupations and participation in social activities, and their experiences utilizing a service dog as a form of AT. Data analysis indicated that each participant’s service dog made a significant impact on their everyday lives and their ability to independently perform everyday activities; however, there are also unique challenges associated with service dog ownership that must be considered when evaluating benefits of service dog partnership. Overall, the positive outcomes reported by participants indicate that service dogs can be considered a beneficial, adaptable form of AT for some persons with mobility impairments. PMID:28621752

The Impact of Service Dogs on Engagement in Occupation among Females with Mobility Impairments: A Qualitative Descriptive Study.

PubMed

Herlache-Pretzer, Ellen; Winkle, Melissa Y; Csatari, Rachel; Kolanowski, Alyssa; Londry, Amy; Dawson, Rachel

2017-06-16

It is becoming more common for people with disabilities to procure service dogs as a form of assistive technology (AT). However, there is little qualitative research examining the impact of service dogs on engagement in valued daily activities (occupations) among persons with mobility impairments. This study used a qualitative descriptive methodology to learn about the experiences of four female service dog owners with mobility impairments, with a focus on the impact of service dog use on the performance of daily occupations and participation in social activities, and their experiences utilizing a service dog as a form of AT. Data analysis indicated that each participant's service dog made a significant impact on their everyday lives and their ability to independently perform everyday activities; however, there are also unique challenges associated with service dog ownership that must be considered when evaluating benefits of service dog partnership. Overall, the positive outcomes reported by participants indicate that service dogs can be considered a beneficial, adaptable form of AT for some persons with mobility impairments.

Significance of primary factors influencing students' performance at the College of Dentistry, King Saud University, Saudi Arabia.

PubMed

Al-Amri, Mohammad; Al-Madi, Ebtissam; Sadig, Walid Mahmoud; Ahmedani, Muhammad Shoaib; Salameh, Ziad

2012-08-01

To determine the effect of different enabling factors such as curriculum, role of faculty, academic advising and availability of learning resources and supportive services on the performance of students pursuing their Bachelor's degree in dentistry. Data was collected from the male and female students of the College of Dentistry, King Saud University, during the academic year 2008-2009. All undergraduate students (576) constituted the total sample size of the study. The respondents were requested to fill a questionnaire form, which was specially designed in accordance with requirements of the Association for Dental Education in Europe (ADEE). The questionnaire comprised 45 questions addressing all aspects of the relevant factors. The five-point Likert scale was used to evaluate the feedback. All the responses (239) were thoroughly examined and only the completely filled forms (169) were subjected to regression analyses, taking student's CGPA as a dependent factor and a depiction of their performance. The t-tests were also worked out to evaluate variations in the responses of male and female students to each sub-factor. The study showed a significant impact of faculty and learning resources and support services on a student's achievement (alpha = 0.05). Surprisingly, academic advising and the dental curriculum had non-significant effect at 95% level of confidence. However, the critical analyses acknowledged that the non-significant impact was due to poor performance of the two factors. The role of faculty and learning resources as well as of support services had significant effect on students' performance. However, there is an immense need to improve the level of academic advising and revise the curriculum to have a significant impact of these factors on the student's achievements.

A versus F: the effects of implicit letter priming on cognitive performance.

PubMed

Ciani, Keith D; Sheldon, Kennon M

2010-03-01

It has been proposed that motivational responses outside people's conscious awareness can be primed to affect academic performance. The current research focused on the relationship between primed evaluative letters (A and F), explicit and implicit achievement motivation, and cognitive performance. Given the evaluative connotation associated with letter grades, we wanted to know if exposure to the letter A before a task could improve performance, and exposure to the letter F could impair performance. If such effects are found, we suspected that they may be rooted in implicit approach versus avoidance motivation, and occur without participants' awareness. The current research was conducted at a large research university in the USA. Twenty-three undergraduates participated in Expt 1, 32 graduate students in Expt 2, and 76 undergraduates in Expt 3. Expts 1 and 2 were conducted in classroom settings, and Expt 3 in a laboratory. In Expt 1, participants were randomly assigned to either the A or F condition. The letter manipulation came in the form of an ostensible Test Bank ID code on the cover of an analogy test, which participants were prompted to view and write on each page of their test. Expt 2 followed a similar procedure but included the neutral letter J as a third condition to serve as a control. In Expt 3, participants' letter condition was presented in the form of an ostensible Subject ID code prior to an anagram test. Expts 1-3 demonstrated that exposure to the letter A enhances performance relative to the exposure to the letter F, whereas exposure to the letter F prior to an achievement task can impair performance. This effect was demonstrated using two different types of samples (undergraduate and graduate students), in two different experimental settings (classroom and laboratory), using two different types of achievement tasks (analogy and anagram), and using two different types of letter presentation (Test Bank ID and Subject ID). Results from the funnelled debriefing, self-report goals, and word-stem completion support our position that the effect of letter on academic performance takes place outside the conscious awareness of participants. Our findings suggest that students are vulnerable to evaluative letters presented before a task, and support years of research highlighting the significant role that nonconscious processes play in achievement settings.

[Analysis of different forms Linderae Radix based on HPLC and NIRS fingerprints].

PubMed

Du, Wei-Feng; Yue, Xian-Ke; Wu, Yao; Ge, Wei-Hong; Lu, Tu-Lin; Wang, Zhi-Min

2016-10-01

Three different forms of Linderae Radix were evaluated by HPLC combined with NIRS fingerprint. The Linderae Radix was divided into three forms, including spindle root, straight root and old root. The HPLC fingerprints were developed, and then cluster analysis was performed using the SPSS software. The near-infrared spectra of Linderae Radix was collected, and then established the discriminant analysis model. The similarity values of the spindle root and straight root all were above 0.990, while the similarity value of the old root was less than 0.850. Two forms of Linderae Radix were obviously divided into three parts by the NIRS model and Cluster analysis. The results of HPLC and FT-NIR analysis showed the quality of Linderae Radix old root was different from the spindle root and straight root. The combined use of the two methods could identify different forms of Linderae Radix quickly and accurately. Copyright© by the Chinese Pharmaceutical Association.

Anemia of inflammation is related to cognitive impairment among children in Leyte, the Philippines.

PubMed

Olson, Courtney L; Acosta, Luz P; Hochberg, Natasha S; Olveda, Remigio M; Jiz, Mario; McGarvey, Stephen T; Kurtis, Jonathan D; Bellinger, David C; Friedman, Jennifer F

2009-10-20

Many studies have addressed the relationship between iron deficiency anemia (IDA) and cognitive impairment, but none have evaluated the role of non-iron deficiency anemia (NIDA). One of the main causes of NIDA in developing countries is AI, largely due to infectious diseases, whereby iron is shunted away from bio-available forms to storage forms, making it less accessible for use by host tissues. The objective of this study was to determine the effect of NIDA, due largely to AI in this context, on cognitive function after adjustment for potential confounders. This cross-sectional study was conducted in Leyte, The Philippines among 322 children ages 7-18 years. Blood samples were collected and analyzed at the time of cognition testing. Three stool samples were collected and evaluated by the Kato Katz method for quantitative assessment for Schistosoma japonicum and geo-helminth infection. Socio-economic status (SES) was evaluated by survey. Linear regression models were used to quantify the adjusted relationship between performance in different cognitive domains and both IDA and NIDA. After adjusting for age, sex, SES and nutritional status, children in the NIDA had lower scores on the PNIT (P = <0.05) and the WRAML memory domain (P<0.05) compared to children in the non-anemic group. Children in the IDA had lower performance on the PNIT compared to the non-anemic group after controlling for potential confounders (P<0.05). NIDA, predominantly due to AI in this context, was related to lower performance on two tests of cognitive function. This is likely due to decreased delivery of iron to host tissues in this context, including the CNS.

Evaluating the effect of work-family conflict and emotional intelligence in workplace: review to increase employees’ performance

NASA Astrophysics Data System (ADS)

Siahaan, E.

2018-03-01

Work-family conflict appeared as a form of women emancipation that made them commit two roles simultaneously, as a house wife and as a worker. This kind of situation created an issue about the impact of the role conflict experienced by women employees towards the level of their emotional control and performance. The aim of this study was to analyze and evaluate the impact of work-family conflict and emotional intelligence towards married women employees’ job performance. This study also proposed a mediating effect of emotional intelligence. This study used a structured questionnaires to gather the required data. There were 54 married women employees in PT Telkom Regional I participated in this study. The result of this study showed that the model could explain 14,6% variance in employees’ performance. Role conflict experienced by a woman burdened her mind and affected her emotional intelligence negatively. There was no effect of work-family conflict on employees’ performance; however, the conflict significantly affected employees performance in an indirect path. The performance would lower through the decrease of employees’ emotional intelligence as the result of the conflict happened. The most important aspect increasing employees’ performance was improving their emotional intelligence while maintaining their work-family conflict.

Evaluation of biofilm formation using milk in a flow cell model and microarray characterization of Staphylococcus aureus strains from bovine mastitis.

PubMed

Snel, G G M; Malvisi, M; Pilla, R; Piccinini, R

2014-12-05

It was hypothesized that biofilm could play an important role in the establishment of chronic Staphylococcus aureus bovine mastitis. The in vitro evaluation of biofilm formation can be performed either in closed/static or in flow-based systems. Efforts have been made to characterize the biofilm-forming ability of S. aureus mastitis isolates, however most authors used static systems and matrices other than UHT milk. It is not clear whether such results could be extrapolated to the mammary gland environment. Therefore, the present study aimed to investigate the biofilm-forming ability of S. aureus strains from subclinical bovine mastitis using the static method and a flow-based one. One hundred and twelve strains were tested by the classic tissue culture plate assay (TCP) and 30 out of them were also tested by a dynamic semi-quantitative assay using commercial UHT milk as culture medium (Milk Flow Culture, MFC) or Tryptic Soy Broth as control medium (TS Flow Culture, TSFC). Only 6 (20%) strains formed biofilm in milk under flow conditions, while 36.6% were considered biofilm-producers in TCP, and 93.3% produced biofilm in TSFC. No agreement was found between TCP, MFC and TSFC results. The association between strain genetic profile, determined by microarray, and biofilm-forming ability in milk was evaluated. Biofilm formation in MFC was significantly associated with the presence of those genes commonly found in bovine-associated strains, assigned to clonal complexes typically detected in mastitis. Based on our results, biofilm-forming potential of bovine strains should be critically analysed and tested applying conditions similar to mammary environment. Copyright © 2014 Elsevier B.V. All rights reserved.

Joint Transmit Antenna Selection and Power Allocation for ISDF Relaying Mobile-to-Mobile Sensor Networks

PubMed Central

Xu, Lingwei; Zhang, Hao; Gulliver, T. Aaron

2016-01-01

The outage probability (OP) performance of multiple-relay incremental-selective decode-and-forward (ISDF) relaying mobile-to-mobile (M2M) sensor networks with transmit antenna selection (TAS) over N-Nakagami fading channels is investigated. Exact closed-form OP expressions for both optimal and suboptimal TAS schemes are derived. The power allocation problem is formulated to determine the optimal division of transmit power between the broadcast and relay phases. The OP performance under different conditions is evaluated via numerical simulation to verify the analysis. These results show that the optimal TAS scheme has better OP performance than the suboptimal scheme. Further, the power allocation parameter has a significant influence on the OP performance. PMID:26907282

Effects of overnight refrigeration on the microscopic evaluation of sputum.

PubMed Central

Penn, R L; Silberman, R

1984-01-01

Microscopic evaluation of sputum permits selection of specimens suitable for culture, assessment of likely pathogens, and the best interpretation of culture results. We prospectively evaluated 50 sputum specimens which were promptly submitted to our clinical laboratory; smears and cultures were performed both immediately and after 20 h of refrigeration. Specimens were grouped according to the numbers of squamous epithelial cells and neutrophils per low-power field present on coded Gram-stained smears. The numbers of bacteria in five oil immersion fields were used to characterize smears for predominant, mixed, or scanty forms. After refrigeration, only three specimens changed group from a definite loss of squamous epithelial cells, and only two changed group from a definite loss of neutrophils. Based on cellular composition, the majority of samples would have been processed identically both before and after refrigeration. In contrast, organism forms detected on smears and their relative quantities were dramatically altered after refrigeration. A predominant smear form was gained in 11 and lost in 8 refrigerated specimens. The frequent changes on smears observed overall resulted from both increases and decreases in numbers of bacteria and yeasts. The majority of sputum culture results were insignificantly affected by the refrigeration of specimens. We conclude that 20 h of refrigeration renders sputum useless for the microscopic evaluation of potential pathogens and the subsequent interpretation of culture results. However, overnight refrigeration does not affect the determination from smears of sputum suitability for culture based on cellular composition. PMID:6699145

Nondestructive evaluation of composite materials - A design philosophy

NASA Technical Reports Server (NTRS)

Duke, J. C., Jr.; Henneke, E. G., II; Stinchcomb, W. W.; Reifsnider, K. L.

1984-01-01

Efficient and reliable structural design utilizing fiber reinforced composite materials may only be accomplished if the materials used may be nondestructively evaluated. There are two major reasons for this requirement: (1) composite materials are formed at the time the structure is fabricated and (2) at practical strain levels damage, changes in the condition of the material, that influence the structure's mechanical performance is present. The fundamental basis of such a nondestructive evaluation capability is presented. A discussion of means of assessing nondestructively the material condition as well as a damage mechanics theory that interprets the material condition in terms of its influence on the mechanical response, stiffness, strength and life is provided.

Assessment of two different types of bias affecting the results of outcome-based evaluation in undergraduate medical education.

PubMed

Schiekirka, Sarah; Anders, Sven; Raupach, Tobias

2014-07-21

Estimating learning outcome from comparative student self-ratings is a reliable and valid method to identify specific strengths and shortcomings in undergraduate medical curricula. However, requiring students to complete two evaluation forms (i.e. one before and one after teaching) might adversely affect response rates. Alternatively, students could be asked to rate their initial performance level retrospectively. This approach might threaten the validity of results due to response shift or effort justification bias. Two consecutive cohorts of medical students enrolled in a six-week cardio-respiratory module were enrolled in this study. In both cohorts, performance gain was estimated for 33 specific learning objectives. In the first cohort, outcomes calculated from ratings provided before (pretest) and after (posttest) teaching were compared to outcomes derived from comparative self-ratings collected after teaching only (thentest and posttest). In the second cohort, only thentests and posttests were used to calculate outcomes, but data collection tools differed with regard to item presentation. In one group, thentest and posttest ratings were obtained sequentially on separate forms while in the other, both ratings were obtained simultaneously for each learning objective. Using thentest ratings to calculate performance gain produced slightly higher values than using true pretest ratings. Direct comparison of then- and posttest ratings also yielded slightly higher performance gain than sequential ratings, but this effect was negligibly small. Given the small effect sizes, using thentests appears to be equivalent to using true pretest ratings. Item presentation in the posttest does not significantly impact on results.

Assessment of two different types of bias affecting the results of outcome-based evaluation in undergraduate medical education

PubMed Central

2014-01-01

Background Estimating learning outcome from comparative student self-ratings is a reliable and valid method to identify specific strengths and shortcomings in undergraduate medical curricula. However, requiring students to complete two evaluation forms (i.e. one before and one after teaching) might adversely affect response rates. Alternatively, students could be asked to rate their initial performance level retrospectively. This approach might threaten the validity of results due to response shift or effort justification bias. Methods Two consecutive cohorts of medical students enrolled in a six-week cardio-respiratory module were enrolled in this study. In both cohorts, performance gain was estimated for 33 specific learning objectives. In the first cohort, outcomes calculated from ratings provided before (pretest) and after (posttest) teaching were compared to outcomes derived from comparative self-ratings collected after teaching only (thentest and posttest). In the second cohort, only thentests and posttests were used to calculate outcomes, but data collection tools differed with regard to item presentation. In one group, thentest and posttest ratings were obtained sequentially on separate forms while in the other, both ratings were obtained simultaneously for each learning objective. Results Using thentest ratings to calculate performance gain produced slightly higher values than using true pretest ratings. Direct comparison of then- and posttest ratings also yielded slightly higher performance gain than sequential ratings, but this effect was negligibly small. Conclusions Given the small effect sizes, using thentests appears to be equivalent to using true pretest ratings. Item presentation in the posttest does not significantly impact on results. PMID:25043503

A comparative study on the forming limit diagram prediction between Marciniak-Kuczynski model and modified maximum force criterion by using the evolving non-associated Hill48 plasticity model

NASA Astrophysics Data System (ADS)

Shen, Fuhui; Lian, Junhe; Münstermann, Sebastian

2018-05-01

Experimental and numerical investigations on the forming limit diagram (FLD) of a ferritic stainless steel were performed in this study. The FLD of this material was obtained by Nakajima tests. Both the Marciniak-Kuczynski (MK) model and the modified maximum force criterion (MMFC) were used for the theoretical prediction of the FLD. From the results of uniaxial tensile tests along different loading directions with respect to the rolling direction, strong anisotropic plastic behaviour was observed in the investigated steel. A recently proposed anisotropic evolving non-associated Hill48 (enHill48) plasticity model, which was developed from the conventional Hill48 model based on the non-associated flow rule with evolving anisotropic parameters, was adopted to describe the anisotropic hardening behaviour of the investigated material. In the previous study, the model was coupled with the MMFC for FLD prediction. In the current study, the enHill48 was further coupled with the MK model. By comparing the predicted forming limit curves with the experimental results, the influences of anisotropy in terms of flow rule and evolving features on the forming limit prediction were revealed and analysed. In addition, the forming limit predictive performances of the MK and the MMFC models in conjunction with the enHill48 plasticity model were compared and evaluated.

Experimental performance of an ablative material as an external insulator for a hypersonic research aircraft

NASA Technical Reports Server (NTRS)

Puster, R. L.; Chapman, A. J.

1977-01-01

An ablative material composed of silica-filled elastomeric silicone was tested to evaluate its thermal and structural performance as an external insulator, or heat shield, for a hypersonic research aircraft. The material was also tested to determine whether it would form a durable char layer when initially heated and thereafter function primarily as an insulator with little further pyrolysis or char removal. Aerothermal tests were representative of nominal Mach 6 cruise conditions of the aircraft, and additional tests were representative of Mach 8 cruise and interference heating conditions. Radiant heating tests were used to simulate the complete nominal Mach 6 surface-temperature history. The silica char that formed during aerothermal tests was not durable. The char experienced a general and preferential surface recession, with the primary mechanism for char removal being erosion. Tests revealed that radiant heating is not a valid technique for simulating aerodynamic heating of the material.

Multisensor data fusion for integrated maritime surveillance

NASA Astrophysics Data System (ADS)

Premji, A.; Ponsford, A. M.

1995-01-01

A prototype Integrated Coastal Surveillance system has been developed on Canada's East Coast to provide effective surveillance out to and beyond the 200 nautical mile Exclusive Economic Zone. The system has been designed to protect Canada's natural resources, and to monitor and control the coastline for smuggling, drug trafficking, and similar illegal activity. This paper describes the Multiple Sensor - Multiple Target data fusion system that has been developed. The fusion processor has been developed around the celebrated Multiple Hypothesis Tracking algorithm which accommodates multiple targets, new targets, false alarms, and missed detections. This processor performs four major functions: plot-to-track association to form individual radar tracks; fusion of radar tracks with secondary sensor reports; track identification and tagging using secondary reports; and track level fusion to form common tracks. Radar data from coherent and non-coherent radars has been used to evaluate the performance of the processor. This paper presents preliminary results.

Nontherapeutic Circumcision of Minors as an Ethically Problematic Form of Iatrogenic Injury.

PubMed

Svoboda, J Steven

2017-08-01

Nontherapeutic circumcision (NTC) of male infants and boys is a common but misunderstood form of iatrogenic injury that causes harm by removing functional tissue that has known erogenous, protective, and immunological properties, regardless of whether the surgery generates complications. I argue that the loss of the foreskin itself should be counted, clinically and morally, as a harm in evaluating NTC; that a comparison of benefits and risks is not ethically sufficient in an analysis of a nontherapeutic procedure performed on patients unable to provide informed consent; and that circumcision violates clinicians' imperatives to respect patients' autonomy, to do good, to do no harm, and to be just. When due consideration is given to these values, the balance of factors suggests that NTC should be deferred until the affected person can perform his own cost-benefit analysis, applying his mature, informed preferences and values. © 2017 American Medical Association. All Rights Reserved.

Issues in evaluation: evaluating assessments of elderly people using a combination of methods.

PubMed

McEwan, R T

1989-02-01

In evaluating a health service, individuals will give differing accounts of its performance, according to their experiences of the service, and the evaluative perspective they adopt. The value of a service may also change through time, and according to the particular part of the service studied. Traditional health care evaluations have generally not accounted for this variability because of the approaches used. Studies evaluating screening or assessment programmes for the elderly have focused on programme effectiveness and efficiency, using relatively inflexible quantitative methods. Evaluative approaches must reflect the complexity of health service provision, and methods must vary to suit the particular research objective. Under these circumstances, this paper presents the case for the use of multiple triangulation in evaluative research, where differing methods and perspectives are combined in one study. Emphasis is placed on the applications and benefits of subjectivist approaches in evaluation. An example of combined methods is provided in the form of an evaluation of the Newcastle Care Plan for the Elderly.

Teamwork in Task Analysis. Training Manual V. Evaluation of the Marine Corps Task Analysis Program. Technical Report No. 9.

ERIC Educational Resources Information Center

Kuriloff, Arthur H.; Yoder, Dale

This training manual provides guidelines for effective teamwork and work-team maintenance and development. It was designed for use in the Marine Corps Task Analysis program, in which staff members are organized to form a work-team whose continuing performance as an effective team is crucial for success of the project. Chapter 1, the major portion…

A Peer Assessment Approach to Project Based Blended Learning Course in a Vietnamese Higher Education

ERIC Educational Resources Information Center

Nguyen, Viet Anh

2017-01-01

This article presents a model using peer assessment to evaluate students taking part in blended - learning courses (BL). In these courses, teaching activities are carried out in the form of traditional face-to-face (F2F) and learning activities are performed online via the learning management system Moodle. In the model, the topics of courses are…

Building Learning Communities: Partnerships, Social Capital and VET Performance. A National Vocational Education and Training Research and Evaluation Program Report

ERIC Educational Resources Information Center

Allison, Janelle; Gorringe, Scott; Lacey, Justine

2006-01-01

This study examines the nature of the impact of vocational education and training (VET), and its project-based activities and partnerships, on the development of sustainable communities in regional Australia. It finds that VET plays a critical role as the entry point to learning and builds considerable social and other forms of capital in regional…

Using TSP Data to Evaluate Your Project Performance

DTIC Science & Technology

2010-09-01

EVA) [ Pressman 2005]. However, unlike earned value, the value is calculated based on the planned size of software components instead of the planned...Hopkins University Press, 1881. 38 | CMU/SEI-2010-TR-038 [ Pressman 2005] Pressman , Roger S. Software Engineering: A Practitioner’s Approach, R.S... Pressman and Asso- ciates, 2005. [Tuma 2010] Tuma Solutions LLC, 2010. http://www.processdash.com/ REPORT DOCUMENTATION PAGE Form Approved

Regression Simulation of Turbine Engine Performance - Accuracy Improvement (TASK IV)

DTIC Science & Technology

1978-09-30

33 21 Generalized Form of the Regression Equation for the Optimized Polynomial Exponent M ethod...altitude, Mach number and power setting combinations were generated during the ARES evaluation. The orthogonal Latin Square selection procedure...pattern. In data generation , the low (L), mid (M), and high (H) values of a variable are not always the same. At some of the corner points where

Cubature/ Unscented/ Sigma Point Kalman Filtering with Angular Measurement Models

DTIC Science & Technology

2015-07-06

Cubature/ Unscented/ Sigma Point Kalman Filtering with Angular Measurement Models David Frederic Crouse Naval Research Laboratory 4555 Overlook Ave...measurement and process non- linearities, such as the cubature Kalman filter , can perform ex- tremely poorly in many applications involving angular... Kalman filtering is a realization of the best linear unbiased estimator (BLUE) that evaluates certain integrals for expected values using different forms

High temperature arc-track resistant aerospace insulation

NASA Technical Reports Server (NTRS)

Dorogy, William

1994-01-01

The topics are presented in viewgraph form and include the following: high temperature aerospace insulation; Foster-Miller approach to develop a 300 C rated, arc-track resistant aerospace insulation; advantages and disadvantages of key structural features; summary goals and achievements of the phase 1 program; performance goals for selected materials; materials under evaluation; molecular structures of candidate polymers; candidate polymer properties; film properties; and a detailed program plan.

Results of the U.S. Geological Survey's Analytical Evaluation Program for standard reference samples: T-155 (trace constituents), M-148 (major constituents), N-59 (nutrient constituents), N-60 (nutrient constituents), P-31 (low ionic strength constituents), GWT-4 (ground-water trace constituents) and Hg-27 (Mercury) distributed in September 1998

USGS Publications Warehouse

Farrar, Jerry W.

1999-01-01

This report presents the results of the U.S. Geological Survey's analytical evaluation program for seven standard reference samples -- T-155 (trace constituents), M-148 (major constituents), N-59 (nutrient constituents), N-60 (nutrient constituents), P-31 (low ionic strength constituents), GWT-4 (ground-water trace constituents), and Hg- 27 (mercury) -- which were distributed in September 1998 to 162 laboratories enrolled in the U.S. Geological Survey sponsored interlaboratory testing program. Analytical data that were received from 136 of the laboratories were evaluated with respect to overall laboratory performance and relative laboratory performance for each analyte in the seven reference samples. Results of these evaluations are presented in tabular form. Also presented are tables and graphs summarizing the analytical data provided by each laboratory for each analyte in the seven standard reference samples. The most probable value for each analyte was determined using nonparametric statistics.

Report on the U.S. Geological Survey's evaluation program for standard reference samples distributed in October 1993 : T-127 (trace constituents), M-128 (major constituents), N-40 (nutrients), N-41 (nutrients), P-21 (low ionic strength), Hg-17 (mercury), AMW-3 (acid mine water), and WW-1 (whole water)

USGS Publications Warehouse

Long, H.K.; Farrar, J.W.

1994-01-01

This report presents the results of the U.S. Geological Survey's analytical evaluation program for eight standard reference samples--T-127 (trace constituents), M-128 (major constituents), N-40 (nutrients), N-41 (nutrients), P-21 (low ionic strength), Hg-17 (mercury), AMW-3 (acid mine water), and WW-1 (whole water)--that were distributed in October 1993 to 158 laboratories registered in the U.S. Geological Survey sponsored interlaboratory testing program. Analytical data that were received from 145 of the laboratories were evaluated with respect to: overall laboratory performance and relative laboratory performance for each analyte in the eight reference samples. Results of these evaluations are presented in tabular form. Also presented are tables and graphs summarizing the analytical data provided by each laboratory for each analyte in the eight standard reference samples. The most probable value for each analyte was determined using nonparametric statistics.

Report on the U.S. Geological Survey's evaluation program for standard reference samples distributed in October 1994 : T-131 (trace constituents), T-133 (trace constituents), M-132 (major constituents), N-43 (nutrients), N-44 (nutrients), P-23 (low ionic strength) and Hg-19 (mercury)

USGS Publications Warehouse

Long, H. Keith; Farrar, Jerry W.

1995-01-01

This report presents the results of the U.S. Geological Survey's analytical evaluation program for 7 standard reference samples--T-131 (trace constituents), T-133 (trace constituents), M-132 (major constituents), N-43 (nutrients), N-44 (nutrients), P-23 (low ionic strength), and Hg-19 (mercury). The samples were distributed in October 1994 to 131 laboratories registered in the U.S. Geological Survey sponsored interlaboratory testing program. Analytical data that were received from 121 of the laboratories were evaluated with respect to: overall laboratory performance and relative laboratory performance for each analyte in the seven reference samples. Results of these evaluations are presented in tabular form. Also presented are tables and graphs summarizing the analytical data provided by each laboratory for each analyte in the seven standard reference samples. The most probable value for each analyte was determined using nonparametric statistics.

Development of a Methodology to Conduct Usability Evaluation for Hand Tools that May Reduce the Amount of Small Parts that are Dropped During Installation while Processing Space Flight Hardware

NASA Technical Reports Server (NTRS)

Miller, Darcy

2000-01-01

Foreign object debris (FOD) is an important concern while processing space flight hardware. FOD can be defined as "The debris that is left in or around flight hardware, where it could cause damage to that flight hardware," (United Space Alliance, 2000). Just one small screw left unintentionally in the wrong place could delay a launch schedule while it is retrieved, increase the cost of processing, or cause a potentially fatal accident. At this time, there is not a single solution to help reduce the number of dropped parts such as screws, bolts, nuts, and washers during installation. Most of the effort is currently focused on training employees and on capturing the parts once they are dropped. Advances in ergonomics and hand tool design suggest that a solution may be possible, in the form of specialty hand tools, which secure the small parts while they are being handled. To assist in the development of these new advances, a test methodology was developed to conduct a usability evaluation of hand tools, while performing tasks with risk of creating FOD. The methodology also includes hardware in the form of a testing board and the small parts that can be installed onto the board during a test. The usability of new hand tools was determined based on efficiency and the number of dropped parts. To validate the methodology, participants were tested while performing a task that is representative of the type of work that may be done when processing space flight hardware. Test participants installed small parts using their hands and two commercially available tools. The participants were from three groups: (1) students, (2) engineers / managers and (3) technicians. The test was conducted to evaluate the differences in performance when using the three installation methods, as well as the difference in performance of the three participant groups.

Clinical results of Hi-tech Knee II total knee arthroplasty in patients with rheumatoid athritis: 5- to 12-year follow-up

PubMed Central

2012-01-01

Background Total knee arthroplasty (TKA) is a common form of treatment to relieve pain and improve function in cases of rheumatoid arthritis (RA). Good clinical outcomes have been reported with a variety of TKA prostheses. The cementless Hi-Tech Knee II cruciate-retaining (CR)-type prosthesis, which has 6 fins at the anterior of the femoral component, posterior cruciate ligament (PCL) retention, flat-on-flat surface component geometry, all-polyethylene patella, strong initial fixation by the center screw of the tibial base plate, 10 layers of titanium alloy fiber mesh, and direct compression molded ultra high molecular weight polyethylene (UHMWPE), is appropriate for TKA in the Japanese knee. The present study was performed to evaluate the clinical results of primary TKA in RA using the cementless Hi-Tech Knee II CR-type prosthesis. Materials and methods We performed 32 consecutive primary TKAs using cementless Hi-Tech Knee II CR-type prosthesis in 31 RA patients. The average follow-up period was 8 years 3 months. Clinical evaluations were performed according to the American Knee Society (KS) system, knee score, function score, radiographic evaluation, and complications. Results The mean postoperative maximum flexion angle was 115.6°, and the KS knee score and function score improved to 88 and 70 after surgery, respectively. Complications, such as infection, occurred in 1 patient and revision surgery was performed. There were no cases of loosening in this cohort, and prosthesis survival rate was 96.9% at 12 years postoperatively. Conclusion These results suggest that TKA using the cementless Hi-Tech Knee II CR-type prosthesis is a very effective form of treatment in RA patients at 5 to 12 years postoperatively. Further long-term follow-up studies are required to determine the ultimate utility of this type of prosthesis. PMID:22356935

Thermal Predictions of the Cooling of Waste Glass Canisters

DOE Office of Scientific and Technical Information (OSTI.GOV)

Donna Post Guillen

2014-11-01

Radioactive liquid waste from five decades of weapons production is slated for vitrification at the Hanford site. The waste will be mixed with glass forming additives and heated to a high temperature, then poured into canisters within a pour cave where the glass will cool and solidify into a stable waste form for disposal. Computer simulations were performed to predict the heat rejected from the canisters and the temperatures within the glass during cooling. Four different waste glass compositions with different thermophysical properties were evaluated. Canister centerline temperatures and the total amount of heat transfer from the canisters to themore » surrounding air are reported.« less

Evaluation of computer-aided detection and diagnosis systems.

PubMed

Petrick, Nicholas; Sahiner, Berkman; Armato, Samuel G; Bert, Alberto; Correale, Loredana; Delsanto, Silvia; Freedman, Matthew T; Fryd, David; Gur, David; Hadjiiski, Lubomir; Huo, Zhimin; Jiang, Yulei; Morra, Lia; Paquerault, Sophie; Raykar, Vikas; Samuelson, Frank; Summers, Ronald M; Tourassi, Georgia; Yoshida, Hiroyuki; Zheng, Bin; Zhou, Chuan; Chan, Heang-Ping

2013-08-01

Computer-aided detection and diagnosis (CAD) systems are increasingly being used as an aid by clinicians for detection and interpretation of diseases. Computer-aided detection systems mark regions of an image that may reveal specific abnormalities and are used to alert clinicians to these regions during image interpretation. Computer-aided diagnosis systems provide an assessment of a disease using image-based information alone or in combination with other relevant diagnostic data and are used by clinicians as a decision support in developing their diagnoses. While CAD systems are commercially available, standardized approaches for evaluating and reporting their performance have not yet been fully formalized in the literature or in a standardization effort. This deficiency has led to difficulty in the comparison of CAD devices and in understanding how the reported performance might translate into clinical practice. To address these important issues, the American Association of Physicists in Medicine (AAPM) formed the Computer Aided Detection in Diagnostic Imaging Subcommittee (CADSC), in part, to develop recommendations on approaches for assessing CAD system performance. The purpose of this paper is to convey the opinions of the AAPM CADSC members and to stimulate the development of consensus approaches and "best practices" for evaluating CAD systems. Both the assessment of a standalone CAD system and the evaluation of the impact of CAD on end-users are discussed. It is hoped that awareness of these important evaluation elements and the CADSC recommendations will lead to further development of structured guidelines for CAD performance assessment. Proper assessment of CAD system performance is expected to increase the understanding of a CAD system's effectiveness and limitations, which is expected to stimulate further research and development efforts on CAD technologies, reduce problems due to improper use, and eventually improve the utility and efficacy of CAD in clinical practice.

Symptom and performance validity with veterans assessed for attention-deficit/hyperactivity disorder (ADHD).

PubMed

Shura, Robert D; Denning, John H; Miskey, Holly M; Rowland, Jared A

2017-12-01

Little is known about attention-deficit/hyperactivity disorder (ADHD) in veterans. Practice standards recommend the use of both symptom and performance validity measures in any assessment, and there are salient external incentives associated with ADHD evaluation (stimulant medication access and academic accommodations). The purpose of this study was to evaluate symptom and performance validity measures in a clinical sample of veterans presenting for specialty ADHD evaluation. Patients without a history of a neurocognitive disorder and for whom data were available on all measures (n = 114) completed a clinical interview structured on DSM-5 ADHD symptoms, the Minnesota Multiphasic Personality Inventory-2-Restructured Form (MMPI-2-RF), and the Test of Memory Malingering Trial 1 (TOMM1) as part of a standardized ADHD diagnostic evaluation. Veterans meeting criteria for ADHD were not more likely to overreport symptoms on the MMPI-2-RF nor to fail TOMM1 (score ≤ 41) compared with those who did not meet criteria. Those who overreported symptoms did not endorse significantly more ADHD symptoms; however, those who failed TOMM1 did report significantly more ADHD symptoms (g = 0.90). In the total sample, 19.3% failed TOMM1, 44.7% overreported on the MMPI-2-RF, and 8.8% produced both an overreported MMPI-2-RF and invalid TOMM1. F-r had the highest correlation to TOMM1 scores (r = -.30). These results underscore the importance of assessing both symptom and performance validity in a clinical ADHD evaluation with veterans. In contrast to certain other conditions (e.g., mild traumatic brain injury), ADHD as a diagnosis is not related to higher rates of invalid report/performance in veterans. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

Evaluation of computer-aided detection and diagnosis systemsa)

PubMed Central

Petrick, Nicholas; Sahiner, Berkman; Armato, Samuel G.; Bert, Alberto; Correale, Loredana; Delsanto, Silvia; Freedman, Matthew T.; Fryd, David; Gur, David; Hadjiiski, Lubomir; Huo, Zhimin; Jiang, Yulei; Morra, Lia; Paquerault, Sophie; Raykar, Vikas; Samuelson, Frank; Summers, Ronald M.; Tourassi, Georgia; Yoshida, Hiroyuki; Zheng, Bin; Zhou, Chuan; Chan, Heang-Ping

2013-01-01

Computer-aided detection and diagnosis (CAD) systems are increasingly being used as an aid by clinicians for detection and interpretation of diseases. Computer-aided detection systems mark regions of an image that may reveal specific abnormalities and are used to alert clinicians to these regions during image interpretation. Computer-aided diagnosis systems provide an assessment of a disease using image-based information alone or in combination with other relevant diagnostic data and are used by clinicians as a decision support in developing their diagnoses. While CAD systems are commercially available, standardized approaches for evaluating and reporting their performance have not yet been fully formalized in the literature or in a standardization effort. This deficiency has led to difficulty in the comparison of CAD devices and in understanding how the reported performance might translate into clinical practice. To address these important issues, the American Association of Physicists in Medicine (AAPM) formed the Computer Aided Detection in Diagnostic Imaging Subcommittee (CADSC), in part, to develop recommendations on approaches for assessing CAD system performance. The purpose of this paper is to convey the opinions of the AAPM CADSC members and to stimulate the development of consensus approaches and “best practices” for evaluating CAD systems. Both the assessment of a standalone CAD system and the evaluation of the impact of CAD on end-users are discussed. It is hoped that awareness of these important evaluation elements and the CADSC recommendations will lead to further development of structured guidelines for CAD performance assessment. Proper assessment of CAD system performance is expected to increase the understanding of a CAD system's effectiveness and limitations, which is expected to stimulate further research and development efforts on CAD technologies, reduce problems due to improper use, and eventually improve the utility and efficacy of CAD in clinical practice. PMID:23927365

SOLIDIFICATION OF THE HANFORD LAW WASTE STREAM PRODUCED AS A RESULT OF NEAR-TANK CONTINUOUS SLUDGE LEACHING AND SODIUM HYDROXIDE RECOVERY

DOE Office of Scientific and Technical Information (OSTI.GOV)

Reigel, M.; Johnson, F.; Crawford, C.

2011-09-20

The U.S. Department of Energy (DOE), Office of River Protection (ORP), is responsible for the remediation and stabilization of the Hanford Site tank farms, including 53 million gallons of highly radioactive mixed wasted waste contained in 177 underground tanks. The plan calls for all waste retrieved from the tanks to be transferred to the Waste Treatment Plant (WTP). The WTP will consist of three primary facilities including pretreatment facilities for Low Activity Waste (LAW) to remove aluminum, chromium and other solids and radioisotopes that are undesirable in the High Level Waste (HLW) stream. Removal of aluminum from HLW sludge canmore » be accomplished through continuous sludge leaching of the aluminum from the HLW sludge as sodium aluminate; however, this process will introduce a significant amount of sodium hydroxide into the waste stream and consequently will increase the volume of waste to be dispositioned. A sodium recovery process is needed to remove the sodium hydroxide and recycle it back to the aluminum dissolution process. The resulting LAW waste stream has a high concentration of aluminum and sodium and will require alternative immobilization methods. Five waste forms were evaluated for immobilization of LAW at Hanford after the sodium recovery process. The waste forms considered for these two waste streams include low temperature processes (Saltstone/Cast stone and geopolymers), intermediate temperature processes (steam reforming and phosphate glasses) and high temperature processes (vitrification). These immobilization methods and the waste forms produced were evaluated for (1) compliance with the Performance Assessment (PA) requirements for disposal at the IDF, (2) waste form volume (waste loading), and (3) compatibility with the tank farms and systems. The iron phosphate glasses tested using the product consistency test had normalized release rates lower than the waste form requirements although the CCC glasses had higher release rates than the quenched glasses. However, the waste form failed to meet the vapor hydration test criteria listed in the WTP contract. In addition, the waste loading in the phosphate glasses were not as high as other candidate waste forms. Vitrification of HLW waste as borosilicate glass is a proven process; however the HLW and LAW streams at Hanford can vary significantly from waste currently being immobilized. The ccc glasses show lower release rates for B and Na than the quenched glasses and all glasses meet the acceptance criterion of < 4 g/L. Glass samples spiked with Re{sub 2}O{sub 7} also passed the PCT test. However, further vapor hydration testing must be performed since all the samples cracked and the test could not be performed. The waste loading of the iron phosphate and borosilicate glasses are approximately 20 and 25% respectively. The steam reforming process produced the predicted waste form for both the high and low aluminate waste streams. The predicted waste loadings for the monolithic samples is approximately 39%, which is higher than the glass waste forms; however, at the time of this report, no monolithic samples were made and therefore compliance with the PA cannot be determined. The waste loading in the geopolymer is approximately 40% but can vary with the sodium hydroxide content in the waste stream. Initial geopolymer mixes revealed compressive strengths that are greater than 500 psi for the low aluminate mixes and less than 500 psi for the high aluminate mixes. Further work testing needs to be performed to formulate a geopolymer waste form made using a high aluminate salt solution. A cementitious waste form has the advantage that the process is performed at ambient conditions and is a proven process currently in use for LAW disposal. The Saltstone/Cast Stone formulated using low and high aluminate salt solutions retained at least 97% of the Re that was added to the mix as a dopant. While this data is promising, additional leaching testing must be performed to show compliance with the PA. Compressive strength tests must also be performed on the Cast Stone monoliths to verify PA compliance. Based on testing performed for this report, the borosilicate glass and Cast Stone are the recommended waste forms for further testing. Both are proven technologies for radioactive waste disposal and the initial testing using simulated Hanford LAW waste shows compliance with the PA. Both are resistant to leaching and have greater than 25% waste loading.« less

Communicating radon risk effectively: a mid-course evaluation. Interim report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Smith, V.K.; Desvousges, W.H.; Fisher, A.

A panel of 2300 homeowners was divided into subgroups to test the effectiveness of six alternative ways of explaining the risk from naturally occurring radon gas. The research design focused on two dimensions: qualitative vs. quantitative and directive vs. evaluative. These characteristics led to 4 experimental booklets, which were compared with EPA's Citizen's Guide and a one-page fact sheet. The evaluation examined how much people learned about radon; whether they could form risk perceptions consistent with their home's measured radon level; and whether they felt they had enough information to make a decision about mitigation. The fact sheet did notmore » perform well on any of these evaluation criteria. None of the five booklets clearly was best for all 3 evaluation criteria; the report discusses the implications for designing an effective radon-risk communication program.« less

An evaluation of GTAW-P versus GTA welding of alloy 718

NASA Technical Reports Server (NTRS)

Gamwell, W. R.; Kurgan, C.; Malone, T. W.

1991-01-01

Mechanical properties were evaluated to determine statistically whether the pulsed current gas tungsten arc welding (GTAW-P) process produces welds in alloy 718 with room temperature structural performance equivalent to current Space Shuttle Main Engine (SSME) welds manufactured by the constant current GTAW-P process. Evaluations were conducted on two base metal lots, two filler metal lots, two heat input levels, and two welding processes. The material form was 0.125-inch (3.175-mm) alloy 718 sheet. Prior to welding, sheets were treated to either the ST or STA-1 condition. After welding, panels were left as welded or heat treated to the STA-1 condition, and weld beads were left intact or machined flush. Statistical analyses were performed on yield strength, ultimate tensile strength (UTS), and high cycle fatigue (HCF) properties for all the post welded material conditions. Analyses of variance were performed on the data to determine if there were any significant effects on UTS or HCF life due to variations in base metal, filler metal, heat input level, or welding process. Statistical analyses showed that the GTAW-P process does produce welds with room temperature structural performance equivalent to current SSME welds manufactured by the GTAW process, regardless of prior material condition or post welding condition.

Implant overdentures: dental students' performance in fabrication, denture quality, and patient satisfaction.

PubMed

Aragon, Cecilia E; Cornacchio, Angelica Lee Petrina; Ibarra, Lilia Marcela; Saad, Muhammed N; Zibrowski, Elaine

2010-09-01

The purpose of this study was to evaluate dental students' performance when fabricating a mandibular two-implant overdenture (OD) as compared to conventional dentures (CD) and to determine if these prostheses were successful. Twenty students and twenty patients were divided into two groups: complete denture group (CDG) and maxillary denture and two-implant OD group (ODG). Students' progress was evaluated at each appointment as they were given a clinical assessment score (CAS), which varied from 1 (unacceptable, needs to repeat procedure) to 4 (acceptable, no errors). The success of the prosthesis was evaluated by the patients using a visual analog scale (VAS) and an expert (a prosthodontist) using a denture quality assessment (DQA) form. Performance for both groups was not statistically different across all eight appointments (CDG 3.16 versus ODG 3.25; p=0.46). Patients with ODs reported greater stability with their dentures (p=0.048) and greater ability to chew than patients with CDs (p=0.03). There were no differences between the groups in terms of expert appraisal (ODG 71.1 versus CDG 67.5; p=0.59). The performance of dental students when fabricating a two-implant OD is thus not different from that of a CD. Students can successfully fabricate a two-implant OD as perceived by both patients and prosthodontists.

Optimal trajectories based on linear equations

NASA Technical Reports Server (NTRS)

Carter, Thomas E.

1990-01-01

The Principal results of a recent theory of fuel optimal space trajectories for linear differential equations are presented. Both impulsive and bounded-thrust problems are treated. A new form of the Lawden Primer vector is found that is identical for both problems. For this reason, starting iteratives from the solution of the impulsive problem are highly effective in the solution of the two-point boundary-value problem associated with bounded thrust. These results were applied to the problem of fuel optimal maneuvers of a spacecraft near a satellite in circular orbit using the Clohessy-Wiltshire equations. For this case two-point boundary-value problems were solved using a microcomputer, and optimal trajectory shapes displayed. The results of this theory can also be applied if the satellite is in an arbitrary Keplerian orbit through the use of the Tschauner-Hempel equations. A new form of the solution of these equations has been found that is identical for elliptical, parabolic, and hyperbolic orbits except in the way that a certain integral is evaluated. For elliptical orbits this integral is evaluated through the use of the eccentric anomaly. An analogous evaluation is performed for hyperbolic orbits.

Segmentation of magnetic resonance images using fuzzy algorithms for learning vector quantization.

PubMed

Karayiannis, N B; Pai, P I

1999-02-01

This paper evaluates a segmentation technique for magnetic resonance (MR) images of the brain based on fuzzy algorithms for learning vector quantization (FALVQ). These algorithms perform vector quantization by updating all prototypes of a competitive network through an unsupervised learning process. Segmentation of MR images is formulated as an unsupervised vector quantization process, where the local values of different relaxation parameters form the feature vectors which are represented by a relatively small set of prototypes. The experiments evaluate a variety of FALVQ algorithms in terms of their ability to identify different tissues and discriminate between normal tissues and abnormalities.

Weight propagation and equivalent horsepower for alternate-engined cars

NASA Technical Reports Server (NTRS)

Klose, G. J.; Kurtz, D. W.

1978-01-01

In order to evaluate properly the consequences of replacing conventional Otto-cycle engines with alternate power systems, comparisons must be carried out at the vehicle level with functionally equivalent cars. This paper presents the development and application of a procedure for establishing equivalent vehicles. A systematic weight propagation methodology, based on detailed weight breakdowns and influence factors, yields the vehicle weight impacts due to changes in engine weight and power. Performance-matching criteria, utilizing a vehicle simulation program, are then employed to establish Otto-engine-equivalent vehicles, whose characteristics can form the basis for alternative engine evaluations.

Competitive evaluation of failure detection algorithms for strapdown redundant inertial instruments

NASA Technical Reports Server (NTRS)

Wilcox, J. C.

1973-01-01

Algorithms for failure detection, isolation, and correction of redundant inertial instruments in the strapdown dodecahedron configuration are competitively evaluated in a digital computer simulation that subjects them to identical environments. Their performance is compared in terms of orientation and inertial velocity errors and in terms of missed and false alarms. The algorithms appear in the simulation program in modular form, so that they may be readily extracted for use elsewhere. The simulation program and its inputs and outputs are described. The algorithms, along with an eight algorithm that was not simulated, also compared analytically to show the relationships among them.

Recent development of antifouling polymers: structure, evaluation, and biomedical applications in nano/micro-structures.

PubMed

Liu, Lingyun; Li, Wenchen; Liu, Qingsheng

2014-01-01

Antifouling polymers have been proven to be vital to many biomedical applications such as medical implants, drug delivery, and biosensing. This review covers the major development of antifouling polymers in the last 2 decades, including the material chemistry, structural factors important to antifouling properties, and how to challenge or evaluate the antifouling performances. We then discuss the applications of antifouling polymers in nano/micro-biomedical applications in the form of nanoparticles, thin coatings for medical devices (e.g., artificial joint, catheter, wound dressing), and nano/microscale fibers. © 2014 Wiley Periodicals, Inc.

Advancements in the Design and Fabrication of Ultrasound Transducers for Extreme Temperatures

NASA Astrophysics Data System (ADS)

Bosyj, Christopher

An ultrasound transducer for operation from room temperature to 800 °C is developed. The device includes a lithium niobate piezoelectric crystal, a porous zirconia attenuative backing layer, and a quarter wavelength matching layer. The manufacturing procedure for porous zirconia is optimized by adjusting pore size and forming pressure to yield good acoustic performance and mechanical integrity. Several acoustic coupling methods are evaluated. A novel silver-copper braze and an aluminum-based braze are found to be suitable at elevated temperatures. Several materials are evaluated for their performance as a quarter wavelength matching layer in the transducer stack. The use of either a nickel-chromium or stainless steel matching layer is established in place of ceramic components. Equipment limitations prevent evaluation at 800 °C, though ultrasound transmission is theoretically achievable with the devices established by this study. Reliable high-amplitude, wide-bandwidth ultrasound transmission is achieved from room temperature to 600 °C with two transducer variants.

Development of an Evaluation Methodology for Triple Bottom Line Reports Using International Standards on Reporting

NASA Astrophysics Data System (ADS)

Skouloudis, Antonis; Evangelinos, Konstantinos; Kourmousis, Fotis

2009-08-01

The purpose of this article is twofold. First, evaluation scoring systems for triple bottom line (TBL) reports to date are examined and potential methodological weaknesses and problems are highlighted. In this context, a new assessment methodology is presented based explicitly on the most widely acknowledged standard on non-financial reporting worldwide, the Global Reporting Initiative (GRI) guidelines. The set of GRI topics and performance indicators was converted into scoring criteria while the generic scoring devise was set from 0 to 4 points. Secondly, the proposed benchmark tool was applied to the TBL reports published by Greek companies. Results reveal major gaps in reporting practices, stressing the need for the further development of internal systems and processes in order to collect essential non-financial performance data. A critical overview of the structure and rationale of the evaluation tool in conjunction with the Greek case study is discussed while recommendations for future research on the field of this relatively new form of reporting are suggested.

Development of an evaluation methodology for triple bottom line reports using international standards on reporting.

PubMed

Skouloudis, Antonis; Evangelinos, Konstantinos; Kourmousis, Fotis

2009-08-01

The purpose of this article is twofold. First, evaluation scoring systems for triple bottom line (TBL) reports to date are examined and potential methodological weaknesses and problems are highlighted. In this context, a new assessment methodology is presented based explicitly on the most widely acknowledged standard on non-financial reporting worldwide, the Global Reporting Initiative (GRI) guidelines. The set of GRI topics and performance indicators was converted into scoring criteria while the generic scoring devise was set from 0 to 4 points. Secondly, the proposed benchmark tool was applied to the TBL reports published by Greek companies. Results reveal major gaps in reporting practices, stressing the need for the further development of internal systems and processes in order to collect essential non-financial performance data. A critical overview of the structure and rationale of the evaluation tool in conjunction with the Greek case study is discussed while recommendations for future research on the field of this relatively new form of reporting are suggested.

Evaluation of rice husk ash as filler in tread compounds

NASA Astrophysics Data System (ADS)

Fernandes, M. R. S.; Furtado, C. R. G.; de Sousa, A. M. F.

2014-05-01

Rice which is one of the largest agriculture crops produces around 22% of rice rusk during its milling process. This material is mainly used as fuel for energy generation, which results in an ash, which disposal represents an environmental issue. The rice husk ash (RHA) contains over than 70% of silica in an amorphous form and a lot of applications is being developed for it all over the world. The use of silica as a filler in the tire industry is growing since it contributes significantly to the reduction of fuel consumption of the automobiles, allowing at the same time better traction (safety). This paper presents an evaluation of the use of RHA as filler in rubber tread compounds prepared in lab scale and compares its performance with compounds prepared with commercial silica and carbon black, the fillers normally used in tire industry. Mechanical and rheological properties are evaluated, with emphasis for tan delta as an indicator of tread performance related with rolling resistance (fuel consumption) and wet grip/traction (safety).

The Design and Performance Evaluation of Hydroformed Tubular Torsion Beam Axle

NASA Astrophysics Data System (ADS)

Kim, Jaehyun; Oh, Jinho; Choi, Hanho

2010-06-01

Suspensions for vehicles are structural devices used for suspending a vehicle body and absorbing shocks from the road. Thus, the suspensions must be designed such that they can attenuate shocks from a road and make passengers feel comfortable despite the shocks, and improve steering stability, determined by the ground contact force of tires during running of vehicles. Another important factor to be considered while designing suspensions is that the suspensions must maintain desired stiffness and desired durability despite the repeated application of shocks from roads thereto. The present relates, in general, to a tubular torsion beam for rear suspensions of vehicles and a manufacturing method thereof and, more particularly, to the provision of tubular torsion beams having excellent roll stiffness and excellent roll strength, produced through hydroforming. The hydroforming technology has a lot of benefit which is shape accuracy, good durability caused by compressive pressure, and good forming quality. In this study, the performance evaluation of the hydroformed tubular torsion beam axle is evaluated.

Towards the damage evaluation using Gurson-Tvergaard-Needleman (GTN) model for hot forming processes

NASA Astrophysics Data System (ADS)

Imran, Muhammad; Bambach, Markus

2018-05-01

In the production of semi-finished metal products, hot forming is used to eliminate the pores and voids from the casting process under compressive stresses and to modify the microstructure for further processing. In the case of caliber and flat rolling processes, tensile stresses occur at certain roll gap ratios which promote pore formation on nonmetallic inclusion. The formation of new pores contributes to ductile damage and reduces the load carrying capacity of the material. In the literature, the damage nucleation and growth during the hot forming process are not comprehensively described. The aim of this study is to understand the damage initiation and growth mechanism during hot forming processes. Hot tensile tests are performed at different temperatures and strain rates for 16MnCrS5 steel. To investigate the influence of geometrical variations on the damage mechanism, specimens with different stress triaxiality ratios are used. Finite element simulations using the Gurson-Tvergaard-Needleman (GTN) damage model are performed to estimate the critical void fraction for the damage initiation and the evolution of the void volume fraction. The results showed that the GTN model underestimates the softening of the material due to the independence of the temperature and the strain rate.