Neurology clerkship goals and their effect on learning and satisfaction

PubMed Central

Salas, Rachel Marie E.; Cruz, Tiana E.; Gamaldo, Charlene E.

2016-01-01

Objective: To define medical student goals in the neurology clerkship and explore the association between goal setting and student performance, clerkship satisfaction, self-directed learning (SDL), and interest in neurology. Methods: A 4-year prospective study of consecutive second- to fourth-year medical students rotating through a required 4-week neurology clerkship was conducted. A goal-generating cohort (first 2 years) was enrolled to describe the breadth of student-derived goals. A goal-evaluating cohort (second 2 years) was used to evaluate the frequency of goal achievement and assess associations with performance (e.g., National Board of Medical Examiners [NBME], examination), satisfaction, and SDL behaviors (both based on 5-point Likert scale). Results: Of 440 evaluable students, 201 were goal-generating and 239 goal-evaluating. The top 3 goals were (1) improvement in neurologic examination, (2) understanding neurologic disease, and (3) deriving a differential diagnosis. More than 90% (n = 216/239) of students reported achieving goals. Achievers reported significantly higher clerkship satisfaction (4.2 ± 0.8 vs 2.8 ± 1.0, p < 0.0001), greater interest in neurology (71% vs 35%, p = 0.001), and higher observed tendency toward SDL (4.5 ± 0.5 vs 4.1 ± 0.8, p < 0.0001). After adjusting for age and training, NBME scores were 1.7 points higher in achievers (95% confidence interval 0.1–3.2, p = 0.04). Conclusion: Students consistently generated similar goals for a required neurology clerkship. Goal achievers had better adjusted standardized test scores, higher satisfaction, and greater tendency toward SDL. This student-generated, goal-setting program may be particularly appealing to clinicians, educators, and researchers seeking resource-lean mechanisms to improve student experience and performance in the clinical clerkships. PMID:26718569

2 CFR 200.76 - Performance goal.

Code of Federal Regulations, 2014 CFR

2014-01-01

... achievement can be compared, including a goal expressed as a quantitative standard, value, or rate. In some instances (e.g., discretionary research awards), this may be limited to the requirement to submit technical...

Science Goals to Requirements

NASA Technical Reports Server (NTRS)

Reuter, Dennis

2015-01-01

The presentation will be given at the 26th Annual Thermal Fluids Analysis Workshop (TFAWS 2015) hosted by the Goddard SpaceFlight Center (GSFC) Thermal Engineering Branch (Code 545): This short course will present the science goals for a variety of types of imaging and spectral measurements, the thermal requirements that these goals impose on the instruments designed to obtain the measurements, and some of the types of trades that can be made among instrument subsystems to ensure the required performance is maintained. Examples of thermal system evolution from initial concept to final implementation will be given for several actual systems.

Networks and landscapes: a framework for setting goals and evaluating performance at the large landscape scale

Treesearch

R Patrick Bixler; Shawn Johnson; Kirk Emerson; Tina Nabatchi; Melly Reuling; Charles Curtin; Michele Romolini; Morgan Grove

2016-01-01

The objective of large landscape conser vation is to mitigate complex ecological problems through interventions at multiple and overlapping scales. Implementation requires coordination among a diverse network of individuals and organizations to integrate local-scale conservation activities with broad-scale goals. This requires an understanding of the governance options...

Pesticide Reregistration Performance Measures and Goals 1997-2008

EPA Pesticide Factsheets

Find past annual reports that were submitted, as required by the Federal Insecticide Fungicide and Rodenticide Act (as amended by FQPA), describing the agency's progress in meeting goals for reregistration and tolerance assessment.

Goal-Function Tree Modeling for Systems Engineering and Fault Management

NASA Technical Reports Server (NTRS)

Johnson, Stephen B.; Breckenridge, Jonathan T.

2013-01-01

The draft NASA Fault Management (FM) Handbook (2012) states that Fault Management (FM) is a "part of systems engineering", and that it "demands a system-level perspective" (NASAHDBK- 1002, 7). What, exactly, is the relationship between systems engineering and FM? To NASA, systems engineering (SE) is "the art and science of developing an operable system capable of meeting requirements within often opposed constraints" (NASA/SP-2007-6105, 3). Systems engineering starts with the elucidation and development of requirements, which set the goals that the system is to achieve. To achieve these goals, the systems engineer typically defines functions, and the functions in turn are the basis for design trades to determine the best means to perform the functions. System Health Management (SHM), by contrast, defines "the capabilities of a system that preserve the system's ability to function as intended" (Johnson et al., 2011, 3). Fault Management, in turn, is the operational subset of SHM, which detects current or future failures, and takes operational measures to prevent or respond to these failures. Failure, in turn, is the "unacceptable performance of intended function." (Johnson 2011, 605) Thus the relationship of SE to FM is that SE defines the functions and the design to perform those functions to meet system goals and requirements, while FM detects the inability to perform those functions and takes action. SHM and FM are in essence "the dark side" of SE. For every function to be performed (SE), there is the possibility that it is not successfully performed (SHM); FM defines the means to operationally detect and respond to this lack of success. We can also describe this in terms of goals: for every goal to be achieved, there is the possibility that it is not achieved; FM defines the means to operationally detect and respond to this inability to achieve the goal. This brief description of relationships between SE, SHM, and FM provide hints to a modeling approach to provide formal connectivity between the nominal (SE), and off-nominal (SHM and FM) aspects of functions and designs. This paper describes a formal modeling approach to the initial phases of the development process that integrates the nominal and off-nominal perspectives in a model that unites SE goals and functions of with the failure to achieve goals and functions (SHM/FM).

QoS support for end users of I/O-intensive applications using shared storage systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Davis, Marion Kei; Zhang, Xuechen; Jiang, Song

2011-01-19

I/O-intensive applications are becoming increasingly common on today's high-performance computing systems. While performance of compute-bound applications can be effectively guaranteed with techniques such as space sharing or QoS-aware process scheduling, it remains a challenge to meet QoS requirements for end users of I/O-intensive applications using shared storage systems because it is difficult to differentiate I/O services for different applications with individual quality requirements. Furthermore, it is difficult for end users to accurately specify performance goals to the storage system using I/O-related metrics such as request latency or throughput. As access patterns, request rates, and the system workload change in time,more » a fixed I/O performance goal, such as bounds on throughput or latency, can be expensive to achieve and may not lead to a meaningful performance guarantees such as bounded program execution time. We propose a scheme supporting end-users QoS goals, specified in terms of program execution time, in shared storage environments. We automatically translate the users performance goals into instantaneous I/O throughput bounds using a machine learning technique, and use dynamically determined service time windows to efficiently meet the throughput bounds. We have implemented this scheme in the PVFS2 parallel file system and have conducted an extensive evaluation. Our results show that this scheme can satisfy realistic end-user QoS requirements by making highly efficient use of the I/O resources. The scheme seeks to balance programs attainment of QoS requirements, and saves as much of the remaining I/O capacity as possible for best-effort programs.« less

Relative Effects of Forward and Backward Planning on Goal Pursuit.

PubMed

Park, Jooyoung; Lu, Fang-Chi; Hedgcock, William M

2017-11-01

Considerable research has shown that planning plays an important role in goal pursuit. But how does the way people plan affect goal pursuit? Research on this question is scarce. In the current research, we examined how planning the steps required for goal attainment in chronological order (i.e., forward planning) and reverse chronological order (i.e., backward planning) influences individuals' motivation for and perceptions of goal pursuit. Compared with forward planning, backward planning not only led to greater motivation, higher goal expectancy, and less time pressure but also resulted in better goal-relevant performance. We further demonstrated that this motivational effect occurred because backward planning allowed people to think of tasks required to reach their goals more clearly, especially when goals were complex to plan. These findings suggest that the way people plan matters just as much as whether or not they plan.

Personal and situational predictors of test anxiety of students in post-compulsory education.

PubMed

Putwain, David W; Woods, Kevin A; Symes, Wendy

2010-03-01

Recent models of evaluation anxiety emphasize the importance of personal knowledge and self-regulatory processes in the development of test anxiety, but do not theorize a route for situational influences. To investigate the relationship between test anxiety and personal knowledge beliefs (achievement goals and perceived academic competence), parental pressure/support, and teachers' achievement goals. One-hundred and seventy five students at a sixth-form college following pre-degree courses in Psychology and Sociology. Self-report data were collected for test anxiety, personal achievement goals, academic self-concept, perceived test competence, teachers' achievement goals, and parental pressure/support. Relationships were examined through correlational and regression analyses. The relationship between test anxiety and personal knowledge beliefs differed for the various components of test anxiety. A mastery-avoidance goal was related to worry and tension, and a performance-approach goal to bodily symptoms. Perceived academic competence was related to worry and tension. Parental pressure was associated with stronger worry and test-irrelevant thinking components directly, and with a stronger bodily symptoms component indirectly through a performance-approach goal. Teachers' performance-avoidance goals were related to worry, tension, and bodily symptoms indirectly through personal performance-avoidance goals, and in the case of bodily symptoms additionally through a performance-approach goal. Findings provide partial support for the self-regulatory model of test anxiety suggesting that additional routes are required to account for the role of parental pressure and teachers' performance-avoidance goals and a re-examination of the relationship between test anxiety and achievement goals.

Performance Steel Castings

DTIC Science & Technology

2012-09-30

Development of Sand Properties 103 Advanced Modeling Dataset.. 105 High Strength Low Alloy (HSLA) Steels 107 Steel Casting and Engineering Support...to achieve the performance goals required for new systems. The dramatic reduction in weight and increase in capability will require high performance...for improved weapon system reliability. SFSA developed innovative casting design and manufacturing processes for high performance parts. SFSA is

Situation Awareness Information Requirements for Commercial Airline Pilots

NASA Technical Reports Server (NTRS)

Endsley, Mica R.; Farley, Todd C.; Jones, William M.; Midkiff, Alan H.; Hansman, R. John

1998-01-01

Situation awareness is presented as a fundamental requirement for good airmanship, forming the basis for pilot decision making and performance. To develop a better understanding of the role of situation awareness in flying, an analysis was performed to determine the specific situation awareness information requirements for commercial aircraft pilots. This was conducted as a goal-directed task analysis in which pilots' major goals, subgoals, decisions, and associated situation awareness information requirements were delineated based on elicitation from experienced commercial airline pilots. A determination of the major situation awareness information requirements for visual and instrument flight was developed from this analysis, providing a foundation for future system development which seeks to enhance pilot situation awareness and provide a basis for the development of situation awareness measures for commercial flight.

48 CFR 952.226-72 - Energy Policy Act subcontracting goals and reporting requirements.

Code of Federal Regulations, 2010 CFR

2010-10-01

...) An institution of higher education that meets the requirements of 34 CFR 600.4(a), and has a student... of Education pursuant to 34 CFR 608.2; and (3) Small business concerns, as defined under section 3 of....S.C. 637(d)) or by a woman or women. (b) Goals. The contractor, in performance of this contract...

Response, Emergency Staging, Communications, Uniform Management, and Evacuation (R.E.S.C.U.M.E.) : report on functional and performance requirements, and high-level data and communication needs.

DOT National Transportation Integrated Search

1995-06-01

INTELLIGENT VEHICLE INITIATIVE OR IVI ABSTRACT THE GOAL OF THE TRAVTEK CAMERA CAR STUDY WAS TO FURNISH A DETAILED EVALUATION OF DRIVING AND NAVIGATION PERFORMANCE, SYSTEM USABILITY, AND SAFETY FOR THE TRAVTEK SYSTEM. TO ACHIEVE THIS GOAL, AN INSTRUME...

Earth Observing System/Advanced Microwave Sounding Unit-A (EOS/AMSU-A): Firmware Requirements

NASA Technical Reports Server (NTRS)

Schwantje, Robert

1995-01-01

This Firmware Requirements Document specifies the functional, performance, and interface requirements of the firmware. It also specifies the major characteristics, implementation constraints, and design goals of the firmware.

Shuttle on-orbit contamination and environmental effects

NASA Technical Reports Server (NTRS)

Leger, L. J.; Jacobs, S.; Ehlers, H. K. F.; Miller, E.

1985-01-01

Ensuring the compatibility of the space shuttle system with payloads and payload measurements is discussed. An extensive set of quantitative requirements and goals was developed and implemented by the space shuttle program management. The performance of the Shuttle system as measured by these requirements and goals was assessed partly through the use of the induced environment contamination monitor on Shuttle flights 2, 3, and 4. Contamination levels are low and generally within the requirements and goals established. Additional data from near-term payloads and already planned contamination measurements will complete the environment definition and allow for the development of contamination avoidance procedures as necessary for any payload.

Military engine computational structures technology

NASA Technical Reports Server (NTRS)

Thomson, Daniel E.

1992-01-01

Integrated High Performance Turbine Engine Technology Initiative (IHPTET) goals require a strong analytical base. Effective analysis of composite materials is critical to life analysis and structural optimization. Accurate life prediction for all material systems is critical. User friendly systems are also desirable. Post processing of results is very important. The IHPTET goal is to double turbine engine propulsion capability by the year 2003. Fifty percent of the goal will come from advanced materials and structures, the other 50 percent will come from increasing performance. Computer programs are listed.

Data-driven backward chaining

NASA Technical Reports Server (NTRS)

Haley, Paul

1991-01-01

The C Language Integrated Production System (CLIPS) cannot effectively perform sound and complete logical inference in most real-world contexts. The problem facing CLIPS is its lack of goal generation. Without automatic goal generation and maintenance, forward chaining can only deduce all instances of a relationship. Backward chaining, which requires goal generation, allows deduction of only that subset of what is logically true which is also relevant to ongoing problem solving. Goal generation can be mimicked in simple cases using forward chaining. However, such mimicry requires manual coding of additional rules which can assert an inadequate goal representation for every condition in every rule that can have corresponding facts derived by backward chaining. In general, for N rules with an average of M conditions per rule the number of goal generation rules required is on the order of N*M. This is clearly intractable from a program maintenance perspective. We describe the support in Eclipse for backward chaining which it automatically asserts as it checks rule conditions. Important characteristics of this extension are that it does not assert goals which cannot match any rule conditions, that 2 equivalent goals are never asserted, and that goals persist as long as, but no longer than, they remain relevant.

Strategic plans open for comment

NASA Astrophysics Data System (ADS)

Under the Government Performance and Results Act (the Results Act), agencies of the U.S. government are required to submit a 5-year strategic plan to the U.S. Congress by September 30, 1997 explaining how, when, and why they are spending tax dollars.Enacted in 1993, the Results Act is in tended to "improve efficiency and effective ness of Federal programs by establishing a system to set goals for program performance and to measure results." Thus according to the U.S. House of Representatives Committee on Science, the aim is for agencies to measure their performances by the results of their task and services, not by the number of tasks and services performed. Toward that goal, the Act requires that federal entities complete the following 3-step process:

Performance measures in the earth observations commercialization applications program

NASA Astrophysics Data System (ADS)

Macauley, Molly K.

1996-03-01

Performance measures in the Earth Observations Commercialization Application Program (EOCAP) are key to its success and include net profitability; enhancements to industry productivity through generic innovations in industry practices, standards, and protocols; and documented contributions to public policy governing the newly developing remote sensing industry. Because EOCAP requires company co-funding, both parties to the agreement (the government and the corporate partner) have incentives to pursue these goals. Further strengthening progress towards these goals are requirements for business plans in the company's EOCAP proposal, detailed scrutiny given these plans during proposal selection, and regularly documented progress reports during project implementation.

A guide to performance management for the Health Information Manager.

PubMed

Leggat, Sandra G

This paper provides a summary of human resource management practices that have been identified as being associated with better outcomes in performance management. In general, essential practices include transformational leadership and a coherent program of goal setting, performance monitoring and feedback. Some Health Information Managers may feel they require training assistance to develop the necessary skills in the establishment of meaningful work performance goals for staff and the provision of useful and timely feedback. This paper provides useful information to assist Health Information Managers enhance the performance of their staff.

Government Performance and Results Act: Performance plan FY 1999, U.S. Nuclear Regulatory Commission. Volume 1

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fuches, J.L.

1998-02-01

The Nuclear Regulatory Commission`s (NRC) strategic plan [NUREG-1614, Vol. 1, September 1997] establishes a strategic framework that will guide future decision-making and will help the NRC continue to meet its responsibility for protecting public health and safety, promoting the common defense and security, and protecting the environment. This performance plan complements the agency`s strategic plan by setting annual goals with measurable target levels of performance for FY 1999, as required by the Government Performance and Results Act. No significant contribution was made to the preparation of the performance plan by any non-Federal entity. However, a contractor was used to helpmore » facilitate discussions and resolution of issues. Within six months after the close of FY 1999, the NRC will submit to the President and the Congress a report on program performance for FY 1999. This performance report will review the success of the agency in achieving the performance goals established for FY 1999. Where those goals have been achieved, the underlying assumptions and strategies will be examined to ensure that continued applicability is warranted in the future. If any of the FY 1999 performance goals are not met, the agency will conduct a thorough analysis of why it did not meet the goal and the actions necessary to meet-the goal in the future. One result of this analysis will be the documentation of plans and schedules for achieving the established performance goal. If the analysis should indicate that the performance goal is impractical or infeasible, the performance report will document why that is the case and what action is recommended.« less

Current Hale ROA Voice and Control Communication Practices and Performance: White Paper

NASA Technical Reports Server (NTRS)

2007-01-01

The objective of this white paper is to help achieve the ACCESS 5 goal by sharing the UNITE members knowledge of current HALE ROA communication systems with other ACCESS 5 participants so that all interested parties start from a common understanding as we begin the clarification of requirements for voice and C2 communication. This white paper is also intended to describe the point of departure for any future developments that need to be realized to achieve the long term ACCESS 5 goal. Although this white paper describes the current systems, the functional and performance requirements that are also being developed under ACCESS 5 may not require the same levels of functionality and performance as currently exist. The paper addresses the following: 1) A description of a typical current HALE ROA communications system, 2) HALE ROA communications systems performance metrics, 3) HALE ROA communications systems performance, and 5) A comparison of current HALE ROA communications systems with current regulations.

Four Stories about National Goals for American Education.

ERIC Educational Resources Information Center

Cuban, Larry

1990-01-01

Presents four versions of American educational history highlighting centralization/decentralization issues, American faith in schooling, and cascading national and international changes requiring extraordinary reforms. These diverse stories all arrive at the same conclusion--a need for national goals and performance standards to guide…

GrDHP: a general utility function representation for dual heuristic dynamic programming.

PubMed

Ni, Zhen; He, Haibo; Zhao, Dongbin; Xu, Xin; Prokhorov, Danil V

2015-03-01

A general utility function representation is proposed to provide the required derivable and adjustable utility function for the dual heuristic dynamic programming (DHP) design. Goal representation DHP (GrDHP) is presented with a goal network being on top of the traditional DHP design. This goal network provides a general mapping between the system states and the derivatives of the utility function. With this proposed architecture, we can obtain the required derivatives of the utility function directly from the goal network. In addition, instead of a fixed predefined utility function in literature, we conduct an online learning process for the goal network so that the derivatives of the utility function can be adaptively tuned over time. We provide the control performance of both the proposed GrDHP and the traditional DHP approaches under the same environment and parameter settings. The statistical simulation results and the snapshot of the system variables are presented to demonstrate the improved learning and controlling performance. We also apply both approaches to a power system example to further demonstrate the control capabilities of the GrDHP approach.

NASA's future space power needs and requirements

NASA Technical Reports Server (NTRS)

Schnyer, A. D.; Sovie, Ronald J.

1990-01-01

The National Space Policy of 1988 established the U.S.'s long-range civil space goals, and has served to guide NASA's recent planning for future space mission operations. One of the major goals was to extend the human presence beyond earth's boundaries and to advance the scientific knowledge of the solar system. A broad spectrum of potential civil space mission opportunities and interests are currently being investigated by NASA to meet the espoused goals. Participation in many of these missions requires power systems with capabilities far beyond what exists today. In other mission examples, advanced power systems technology could enhance mission performance significantly. Power system requirements and issues that need resolution to ensure eventual mission accomplishment are addressed, in conjunction with the ongoing NASA technology development efforts and the need for even greater innovative efforts to match the ambitious solar exploration mission goals. Particular attention is given to potential lunar surface operations and technology goals, based on investigations to date. It is suggested that the nuclear reactor power systems can best meet long-life requirements as well as dramatically reduce the earth-surface-to-lunar-surface transportation costs due to the lunar day/night cycle impact on the solar system's energy storage mass requirements. The state of the art of candidate power systems and elements for the lunar application and the respective exploration technology goals for mission life requirements from 10 to 25 years are examined.

Lean, premixed, prevaporized fuel combustor conceptual design study

NASA Technical Reports Server (NTRS)

Fiorentino, A. J.; Greene, W.; Kim, J.

1979-01-01

Four combustor concepts, designed for the energy efficient engine, utilize variable geometry or other flow modulation techniques to control the equivalence ratio of the initial burning zone. Lean conditions are maintained at high power to control oxides of nitrogen while near stoichometric conditions are maintained at low power for low CO and THC emissions. Each concept was analyzed and ranked for its potential in meeting the goals of the program. Although the primary goal of the program is a low level of nitric oxide emissions at stratospheric cruise conditions, both the ground level EPA emission standards and combustor performance and operational requirements typical of advanced subsonic aircraft engines are retained as goals as well. Based on the analytical projections made, two of the concepts offer the potential of achieving the emission goals; however, the projected operational characteristics and reliability of any concept to perform satisfactorily over an entire aircraft flight envelope would require extensive experimental substantiation before engine adaptation can be considered.

Space shuttle orbiter leading-edge flight performance compared to design goals

NASA Technical Reports Server (NTRS)

Curry, D. M.; Johnson, D. W.; Kelly, R. E.

1983-01-01

Thermo-structural performance of the Space Shuttle orbiter Columbia's leading-edge structural subsystem for the first five (5) flights is compared with the design goals. Lessons learned from thse initial flights of the first reusable manned spacecraft are discussed in order to assess design maturity, deficiencies, and modifications required to rectify the design deficiencies. Flight data and post-flight inspections support the conclusion that the leading-edge structural subsystem hardware performance was outstanding for the initial five (5) flights.

Introduction: Aims and Requirements of Future Aerospace Vehicles. Chapter 1

NASA Technical Reports Server (NTRS)

Rodriguez, Pedro I.; Smeltzer, Stanley S., III; McConnaughey, Paul (Technical Monitor)

2001-01-01

The goals and system-level requirements for the next generation aerospace vehicles emphasize safety, reliability, low-cost, and robustness rather than performance. Technologies, including new materials, design and analysis approaches, manufacturing and testing methods, operations and maintenance, and multidisciplinary systems-level vehicle development are key to increasing the safety and reducing the cost of aerospace launch systems. This chapter identifies the goals and needs of the next generation or advanced aerospace vehicle systems.

MARA (Multimode Airborne Radar Altimeter) system documentation. Volume 1: MARA system requirements document

NASA Technical Reports Server (NTRS)

Parsons, C. L. (Editor)

1989-01-01

The Multimode Airborne Radar Altimeter (MARA), a flexible airborne radar remote sensing facility developed by NASA's Goddard Space Flight Center, is discussed. This volume describes the scientific justification for the development of the instrument and the translation of these scientific requirements into instrument design goals. Values for key instrument parameters are derived to accommodate these goals, and simulations and analytical models are used to estimate the developed system's performance.

The Tapered Hybrid Undulator (THUNDER) of the visible free-electron laser oscillator experiment

DOE Office of Scientific and Technical Information (OSTI.GOV)

Robinson, K.E.; Quimby, D.C.; Slater, J.M.

A 5 m tapered hybrid undulator (THUNDER) has been designed and built as part of the Boeing Aerospace Company and Spectra Technology, Inc. visible free-electron laser (FEL) oscillator experiment. The performance goals required of an undulator for a visible oscillator with large extraction are ambitious. They require the establishment of stringent magnetic field quality tolerances which impact design and fabrication techniques. The performance goals of THUNDER are presented. The tolerances resulting from the FEL interaction are contrasted and compared to those of a synchrotron radiation source. The design, fabrication, and field measurements are discussed. The performance of THUNDER serves asmore » a benchmark for future wiggler/undulator design for advanced FEL's and synchrotron radiation sources.« less

14 CFR 1273.40 - Monitoring and reporting program performance.

Code of Federal Regulations, 2010 CFR

2010-01-01

... performance. 1273.40 Section 1273.40 Aeronautics and Space NATIONAL AERONAUTICS AND SPACE ADMINISTRATION... program performance. (a) Monitoring by grantees. Grantees are responsible for managing the day-to-day... assure compliance with applicable Federal requirements and that performance goals are being achieved...

Strategic sustainability performance plan

DOT National Transportation Integrated Search

2010-06-01

In October 2009, President Obama signed Executive Order (EO) 13514 that sets sustainability : goals for Federal agencies and focuses on making improvements in environmental, energy and : economic performance. The Executive Order requires Federal agen...

26 CFR 801.1 - Balanced performance measurement system; in general.

Code of Federal Regulations, 2011 CFR

2011-04-01

... (CONTINUED) INTERNAL REVENUE PRACTICE BALANCED SYSTEM FOR MEASURING ORGANIZATIONAL AND EMPLOYEE PERFORMANCE... and regulatory provisions require the IRS to set performance goals for organizational units and to... 26 Internal Revenue 20 2011-04-01 2011-04-01 false Balanced performance measurement system; in...

26 CFR 801.1 - Balanced performance measurement system; in general.

Code of Federal Regulations, 2010 CFR

2010-04-01

... (CONTINUED) INTERNAL REVENUE PRACTICE BALANCED SYSTEM FOR MEASURING ORGANIZATIONAL AND EMPLOYEE PERFORMANCE... and regulatory provisions require the IRS to set performance goals for organizational units and to... 26 Internal Revenue 20 2010-04-01 2010-04-01 false Balanced performance measurement system; in...

Procedural instructions, principles, and examples: how to structure instructions for procedural tasks to enhance performance, learning, and transfer.

PubMed

Eiriksdottir, Elsa; Catrambone, Richard

2011-12-01

The goal of this article is to investigate how instructions can be constructed to enhance performance and learning of procedural tasks. Important determinants of the effectiveness of instructions are type of instructions (procedural information, principles, and examples) and pedagogical goal (initial performance, learning, and transfer). Procedural instructions describe how to complete tasks in a stepwise manner, principles describe rules governing the tasks, and examples demonstrate how instances of the task are carried out. The authors review the research literature associated with each type of instruction to identify factors determining effectiveness for different pedagogical goals. The results suggest a trade-off between usability and learnability. Specific instructions help initial performance, whereas more general instructions, requiring problem solving, help learning and transfer. Learning from instructions takes cognitive effort, and research suggests that learners typically opt for low effort. However, it is possible to meet both goals of good initial performance and learning with methods such as fading and by combining different types of instructions. How instructions are constructed influences their effectiveness for the goals of good initial performance, learning, and transfer, and it is therefore important for researchers and practitioners alike to define the pedagogical goal of instructions. If the goal is good initial performance, then instructions should highly resemble the task at hand (e.g., in the form of detailed procedural instructions and examples), but if the goal is good learning and transfer, then instructions should be more abstract, inducing learners to expend the necessary cognitive effort for learning.

48 CFR 952.226-72 - Energy Policy Act subcontracting goals and reporting requirements.

Code of Federal Regulations, 2012 CFR

2012-10-01

... Americans, i.e., American Indians, Eskimos, Aleuts, and Native Hawaiians, or any combination thereof; (2....S.C. 637(d)) or by a woman or women. (b) Goals. The Contractor, in performance of this contract... business concerns controlled by socially and economically disadvantaged individuals or by women...

48 CFR 952.226-72 - Energy Policy Act subcontracting goals and reporting requirements.

Code of Federal Regulations, 2014 CFR

2014-10-01

... Americans, i.e., American Indians, Eskimos, Aleuts, and Native Hawaiians, or any combination thereof; (2....S.C. 637(d)) or by a woman or women. (b) Goals. The Contractor, in performance of this contract... business concerns controlled by socially and economically disadvantaged individuals or by women...

48 CFR 952.226-72 - Energy Policy Act subcontracting goals and reporting requirements.

Code of Federal Regulations, 2013 CFR

2013-10-01

... Americans, i.e., American Indians, Eskimos, Aleuts, and Native Hawaiians, or any combination thereof; (2....S.C. 637(d)) or by a woman or women. (b) Goals. The Contractor, in performance of this contract... business concerns controlled by socially and economically disadvantaged individuals or by women...

48 CFR 952.226-72 - Energy Policy Act subcontracting goals and reporting requirements.

Code of Federal Regulations, 2011 CFR

2011-10-01

... Americans, i.e., American Indians, Eskimos, Aleuts, and Native Hawaiians, or any combination thereof; (2....S.C. 637(d)) or by a woman or women. (b) Goals. The Contractor, in performance of this contract... business concerns controlled by socially and economically disadvantaged individuals or by women...

Goal-Function Tree Modeling for Systems Engineering and Fault Management

NASA Technical Reports Server (NTRS)

Patterson, Jonathan D.; Johnson, Stephen B.

2013-01-01

The draft NASA Fault Management (FM) Handbook (2012) states that Fault Management (FM) is a "part of systems engineering", and that it "demands a system-level perspective" (NASAHDBK- 1002, 7). What, exactly, is the relationship between systems engineering and FM? To NASA, systems engineering (SE) is "the art and science of developing an operable system capable of meeting requirements within often opposed constraints" (NASA/SP-2007-6105, 3). Systems engineering starts with the elucidation and development of requirements, which set the goals that the system is to achieve. To achieve these goals, the systems engineer typically defines functions, and the functions in turn are the basis for design trades to determine the best means to perform the functions. System Health Management (SHM), by contrast, defines "the capabilities of a system that preserve the system's ability to function as intended" (Johnson et al., 2011, 3). Fault Management, in turn, is the operational subset of SHM, which detects current or future failures, and takes operational measures to prevent or respond to these failures. Failure, in turn, is the "unacceptable performance of intended function." (Johnson 2011, 605) Thus the relationship of SE to FM is that SE defines the functions and the design to perform those functions to meet system goals and requirements, while FM detects the inability to perform those functions and takes action. SHM and FM are in essence "the dark side" of SE. For every function to be performed (SE), there is the possibility that it is not successfully performed (SHM); FM defines the means to operationally detect and respond to this lack of success. We can also describe this in terms of goals: for every goal to be achieved, there is the possibility that it is not achieved; FM defines the means to operationally detect and respond to this inability to achieve the goal. This brief description of relationships between SE, SHM, and FM provide hints to a modeling approach to provide formal connectivity between the nominal (SE), and off-nominal (SHM and FM) aspects of functions and designs. This paper describes a formal modeling approach to the initial phases of the development process that integrates the nominal and off-nominal perspectives in a model that unites SE goals and functions of with the failure to achieve goals and functions (SHM/FM). This methodology and corresponding model, known as a Goal-Function Tree (GFT), provides a means to represent, decompose, and elaborate system goals and functions in a rigorous manner that connects directly to design through use of state variables that translate natural language requirements and goals into logical-physical state language. The state variable-based approach also provides the means to directly connect FM to the design, by specifying the range in which state variables must be controlled to achieve goals, and conversely, the failures that exist if system behavior go out-of-range. This in turn allows for the systems engineers and SHM/FM engineers to determine which state variables to monitor, and what action(s) to take should the system fail to achieve that goal. In sum, the GFT representation provides a unified approach to early-phase SE and FM development. This representation and methodology has been successfully developed and implemented using Systems Modeling Language (SysML) on the NASA Space Launch System (SLS) Program. It enabled early design trade studies of failure detection coverage to ensure complete detection coverage of all crew-threatening failures. The representation maps directly both to FM algorithm designs, and to failure scenario definitions needed for design analysis and testing. The GFT representation provided the basis for mapping of abort triggers into scenarios, both needed for initial, and successful quantitative analyses of abort effectiveness (detection and response to crew-threatening events).

Experimental clean combustor program, phase 2

NASA Technical Reports Server (NTRS)

Roberts, R.; Peduzzi, A.; Vitti, G. E.

1976-01-01

Combustor pollution reduction technology for commercial CTOL engines was generated and this technology was demonstrated in a full-scale JT9D engine in 1976. Component rig refinement of the two best combustor concepts were tested. These concepts are the vorbix combustor, and a hybrid combustor which combines the pilot zone of the staged premix combustor and the main zone of the swirl-can combustor. Both concepts significantly reduced all pollutant emissions relative to the JT9D-7 engine combustor. However, neither concept met all program goals. The hybrid combustor met pollution goals for unburned hydrocarbons and carbon monoxide but did not achieve the oxides of nitrogen goal. This combustor had significant performance deficiencies. The Vorbix combustor met goals for unburned hydrocarbons and oxides of nitrogen but did not achieve the carbon monoxide goal. Performance of the vorbix combustor approached the engine requirements. On the basis of these results, the vorbix combustor was selected for the engine demonstration program. A control study was conducted to establish fuel control requirements imposed by the low-emission combustor concepts and to identify conceptual control system designs. Concurrent efforts were also completed on two addendums: an alternate fuels addendum and a combustion noise addendum.

Early prediction of student goals and affect in narrative-centered learning environments

NASA Astrophysics Data System (ADS)

Lee, Sunyoung

Recent years have seen a growing recognition of the role of goal and affect recognition in intelligent tutoring systems. Goal recognition is the task of inferring users' goals from a sequence of observations of their actions. Because of the uncertainty inherent in every facet of human computer interaction, goal recognition is challenging, particularly in contexts in which users can perform many actions in any order, as is the case with intelligent tutoring systems. Affect recognition is the task of identifying the emotional state of a user from a variety of physical cues, which are produced in response to affective changes in the individual. Accurately recognizing student goals and affect states could contribute to more effective and motivating interactions in intelligent tutoring systems. By exploiting knowledge of student goals and affect states, intelligent tutoring systems can dynamically modify their behavior to better support individual students. To create effective interactions in intelligent tutoring systems, goal and affect recognition models should satisfy two key requirements. First, because incorrectly predicted goals and affect states could significantly diminish the effectiveness of interactive systems, goal and affect recognition models should provide accurate predictions of user goals and affect states. When observations of users' activities become available, recognizers should make accurate early" predictions. Second, goal and affect recognition models should be highly efficient so they can operate in real time. To address key issues, we present an inductive approach to recognizing student goals and affect states in intelligent tutoring systems by learning goals and affect recognition models. Our work focuses on goal and affect recognition in an important new class of intelligent tutoring systems, narrative-centered learning environments. We report the results of empirical studies of induced recognition models from observations of students' interactions in narrative-centered learning environments. Experimental results suggest that induced models can make accurate early predictions of student goals and affect states, and they are sufficiently efficient to meet the real-time performance requirements of interactive learning environments.

Impact of post-stroke unilateral spatial neglect on goal-directed arm movements: systematic literature review.

PubMed

Ogourtsova, Tatiana; Archambault, Philippe; Lamontagne, Anouk

2015-12-01

Unilateral spatial neglect (USN), a highly prevalent post-stroke impairment, refers to one's inability to orient or respond to stimuli located in the contralesional visual hemispace. Unilateral spatial neglect has been shown to strongly affect motor performance in functional activities, including non-affected upper extremity (UE) movements. To date, our understanding of the effects of USN on goal-directed UE movements is limited and comparing performance of individuals post-stroke with and without USN is required. To determine, in individuals with stroke, how does the presence of USN, in comparison to the absence of USN, impacts different types of goal-directed movements of the non-affected UE. The present review approach consisted of a comprehensive literature search, an assessment of the quality of the selected studies and qualitative data analysis. A total of 20 studies of moderate to high quality were selected. The USN-specific impairments were found in tasks that required a perceptual, memory-guided or delayed actions, and fewer impairments were found in tasks that required an immediate action to a predefined target. The results indicate that USN contributes to deficits observed in action execution with the non-effected UE that requires greater perceptual demands.

Structures and Materials Technologies for Extreme Environments Applied to Reusable Launch Vehicles

NASA Technical Reports Server (NTRS)

Scotti, Stephen J.; Clay, Christopher; Rezin, Marc

2003-01-01

This paper provides an overview of the evolution of structures and materials technology approaches to survive the challenging extreme environments encountered by earth-to-orbit space transportation systems, with emphasis on more recent developments in the USA. The evolution of technology requirements and experience in the various approaches to meeting these requirements has significantly influenced the technology approaches. While previous goals were primarily performance driven, more recently dramatic improvements in costs/operations and in safety have been paramount goals. Technologies that focus on the cost/operations and safety goals in the area of hot structures and thermal protection systems for reusable launch vehicles are presented. Assessments of the potential ability of the various technologies to satisfy the technology requirements, and their current technology readiness status are also presented.

NASP X-30 Propulsion technology status

NASA Technical Reports Server (NTRS)

Powell, William E.

1992-01-01

The performance goals of the NASP program require an aero-propulsion system with a high effective specific impulse. In order to achieve these goals, the high potential performance of air-breathing engines must be achieved over a very wide Mach number operating range. This, in turn, demands high component performance and involves many important technical issues which must be resolved. Scramjet Propulsion Technology is divided into five major areas: (1) inlets, (2) combustors, (3) nozzles, (4) component integration, and (5) test facilities. A status report covering the five areas is presented.

Goals, intentions and mental states: challenges for theories of autism.

PubMed

Hamilton, Antonia F de C

2009-08-01

The ability to understand the goals and intentions behind other people's actions is central to many social interactions. Given the profound social difficulties seen in autism, we might expect goal understanding to be impaired in these individuals. Two influential theories, the 'broken mirror' theory and the mentalising theory, can both predict this result. However, a review of the current data provides little empirical support for goal understanding difficulties; several studies demonstrate normal performance by autistic children on tasks requiring the understanding of goals or intentions. I suggest that this conclusion forces us to reject the basic broken mirror theory and to re-evaluate the breadth of the mentalising theory. More subtle theories which distinguish between different types of mirroring and different types of mentalising may be able to account for the present data, and further research is required to test and refine these theories.

Phosphoric acid electric utility fuel cell technology development

NASA Astrophysics Data System (ADS)

Breault, R. D.; Briggs, T. A.; Congdon, J. V.; Demarche, T. E.; Gelting, R. L.; Goller, G. J.; Luoma, W. L.; McCloskey, M. W.; Mientek, A. P.; Obrien, J. J.

1991-04-01

The major objective of this effort was the advancement of cell and stack technology required to meet performance and cost criteria for fabrication and operation of a prototype large area, full height phosphoric acid fuel cell stack. The performance goal for the cell stack corresponded to a power density of 150 wsf, and the manufactured cost goal was a 510 $/kW reduction (in 1981 dollars) compared to existing 3.7 ft.(exp 2) active area cell stacks.

Evaluating public participation in environmental decision-making: EPA's superfund community involvement program.

Treesearch

Susan Charnley; Bruce Engelbert

2005-01-01

This article discusses an 8-year, ongoing project that evaluates the Environmental Protection Agency's Superfund community involvement program. The project originated as a response to the Government Performance and Results Act, which requires federal agencies to articulate program goals, and evaluate and report their progress in meeting those goals. The evaluation...

Energy technologies evaluated against climate targets using a cost and carbon trade-off curve.

PubMed

Trancik, Jessika E; Cross-Call, Daniel

2013-06-18

Over the next few decades, severe cuts in emissions from energy will be required to meet global climate-change mitigation goals. These emission reductions imply a major shift toward low-carbon energy technologies, and the economic cost and technical feasibility of mitigation are therefore highly dependent upon the future performance of energy technologies. However, existing models do not readily translate into quantitative targets against which we can judge the dynamic performance of technologies. Here, we present a simple, new model for evaluating energy-supply technologies and their improvement trajectories against climate-change mitigation goals. We define a target for technology performance in terms of the carbon intensity of energy, consistent with emission reduction goals, and show how the target depends upon energy demand levels. Because the cost of energy determines the level of adoption, we then compare supply technologies to one another and to this target based on their position on a cost and carbon trade-off curve and how the position changes over time. Applying the model to U.S. electricity, we show that the target for carbon intensity will approach zero by midcentury for commonly cited emission reduction goals, even under a high demand-side efficiency scenario. For Chinese electricity, the carbon intensity target is relaxed and less certain because of lesser emission reductions and greater variability in energy demand projections. Examining a century-long database on changes in the cost-carbon space, we find that the magnitude of changes in cost and carbon intensity that are required to meet future performance targets is not unprecedented, providing some evidence that these targets are within engineering reach. The cost and carbon trade-off curve can be used to evaluate the dynamic performance of existing and new technologies against climate-change mitigation goals.

7 CFR 1290.9 - Reporting and oversight requirements.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 1290.9 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (MARKETING AGREEMENTS AND ORDERS; MISCELLANEOUS COMMODITIES), DEPARTMENT OF AGRICULTURE SPECIALTY... summarize activities performed, targets, and/or performance goals achieved during the reporting period for...

Report of activities of the advanced coal extraction systems definition project, 1979 - 1980

NASA Technical Reports Server (NTRS)

Lavin, M. L.; Isenberg, L.

1981-01-01

During this period effort was devoted to: formulation of system performance goals in the areas of production cost, miner safety, miner health, environmental impact, and coal conservation, survey and in depth assessment of promising technology, and characterization of potential resource targets. Primary system performance goals are to achieve a return on incremental investment of 150% of the value required for a low risk capital improvement project and to reduce deaths and disability injuries per million man-hour by 50%. Although these performance goals were developed to be immediately applicable to the Central Appalachian coal resources, they were also designed to be readily adaptable to other coals by appending a geological description of the new resource. The work done on technology assessment was concerned with the performance of the slurry haulage system.

49 CFR 110.90 - Grant monitoring, reports, and records retention.

Code of Federal Regulations, 2010 CFR

2010-10-01

... performance of supported activities to assure compliance with applicable Federal requirements and achievement of performance goals. Monitoring must cover each program, function, activity, or task covered by the... shall submit a performance report at the completion of an activity for which reimbursement is being...

A Comprehensive Review of the Literature on Summary of Performance

ERIC Educational Resources Information Center

Richter, Sharon McCormack; Mazzotti, Valerie L.

2011-01-01

The Individuals with Disabilities Education Act (2004) requires local education agencies to provide students with disabilities exiting high school with a Summary of Performance document, which includes academic and functional performance information and recommendations for helping the student reach postsecondary goals. However, the federal mandate…

Low NO(x) Combustor Development

NASA Technical Reports Server (NTRS)

Kastl, J. A.; Herberling, P. V.; Matulaitis, J. M.

2005-01-01

The goal of these efforts was the development of an ultra-low emissions, lean-burn combustor for the High Speed Civil Transport. The HSCT Mach 2.4 FLADE C1 Cycle was selected as the baseline engine cycle. A preliminary compilation of performance requirements for the HSCT combustor system was developed. The emissions goals of the program, baseline engine cycle, and standard combustor performance requirements were considered in developing the compilation of performance requirements. Seven combustor system designs were developed. The development of these system designs was facilitated by the use of spreadsheet-type models which predicted performance of the combustor systems over the entire flight envelope of the HSCT. A chemical kinetic model was developed for an LPP combustor and employed to study NO(x) formation kinetics, and CO burnout. These predictions helped to define the combustor residence time. Five fuel-air mixer concepts were analyzed for use in the combustor system designs. One of the seven system designs, one using the Swirl-Jet and Cyclone Swirler fuel-air mixers, was selected for a preliminary mechanical design study.

Increasing the Writing Performance of Urban Seniors Placed At-Risk through Goal-Setting in a Culturally Responsive and Creativity-Centered Classroom

ERIC Educational Resources Information Center

Estrada, Brittany; Warren, Susan

2014-01-01

Efforts to support marginalized students require not only identifying systemic inequities, but providing a classroom infrastructure that supports the academic achievement of all students. This action research study examined the effects of implementing goal-setting strategies and emphasizing creativity in a culturally responsive classroom (CRC) on…

Theory of constraints for publicly funded health systems.

PubMed

Sadat, Somayeh; Carter, Michael W; Golden, Brian

2013-03-01

Originally developed in the context of publicly traded for-profit companies, theory of constraints (TOC) improves system performance through leveraging the constraint(s). While the theory seems to be a natural fit for resource-constrained publicly funded health systems, there is a lack of literature addressing the modifications required to adopt TOC and define the goal and performance measures. This paper develops a system dynamics representation of the classical TOC's system-wide goal and performance measures for publicly traded for-profit companies, which forms the basis for developing a similar model for publicly funded health systems. The model is then expanded to include some of the factors that affect system performance, providing a framework to apply TOC's process of ongoing improvement in publicly funded health systems. Future research is required to more accurately define the factors affecting system performance and populate the model with evidence-based estimates for various parameters in order to use the model to guide TOC's process of ongoing improvement.

AGT100 turbomachinery. [for automobiles

NASA Technical Reports Server (NTRS)

Tipton, D. L.; Mckain, T. F.

1982-01-01

High-performance turbomachinery components have been designed and tested for the AGT100 automotive engine. The required wide range of operation coupled with the small component size, compact packaging, and low cost of production provide significant aerodynamic challenges. Aerodynamic design and development testing of the centrifugal compressor and two radial turbines are described. The compressor achieved design flow, pressure ratio, and surge margin on the initial build. Variable inlet guide vanes have proven effective in modulating flow capacity and in improving part-speed efficiency. With optimum use of the variable inlet guide vanes, the initial efficiency goals have been demonstrated in the critical idle-to-70% gasifier speed range. The gasifier turbine exceeded initial performance goals and demonstrated good performance over a wide range. The radial power turbine achieved 'developed' efficiency goals on the first build.

Development and construct validation of the Client-Centredness of Goal Setting (C-COGS) scale.

PubMed

Doig, Emmah; Prescott, Sarah; Fleming, Jennifer; Cornwell, Petrea; Kuipers, Pim

2015-07-01

Client-centred philosophy is integral to occupational therapy practice and client-centred goal planning is considered fundamental to rehabilitation. Evaluation of whether goal-planning practices are client-centred requires an understanding of the client's perspective about goal-planning processes and practices. The Client-Centredness of Goal Setting (C-COGS) was developed for use by practitioners who seek to be more client-centred and who require a scale to guide and evaluate individually orientated practice, especially with adults with cognitive impairment related to acquired brain injury. To describe development of the C-COGS scale and examine its construct validity. The C-COGS was administered to 42 participants with acquired brain injury after multidisciplinary goal planning. C-COGS scores were correlated with the Canadian Occupational Performance Measure (COPM) importance scores, and measures of therapeutic alliance, motivation, and global functioning to establish construct validity. The C-COGS scale has three subscales evaluating goal alignment, goal planning participation, and client-centredness of goals. The C-COGS subscale items demonstrated moderately significant correlations with scales measuring similar constructs. Findings provide preliminary evidence to support the construct validity of the C-COGS scale, which is intended to be used to evaluate and reflect on client-centred goal planning in clinical practice, and to highlight factors contributing to best practice rehabilitation.

48 CFR 1609.7101-1 - Community-rated carrier incentive performance elements.

Code of Federal Regulations, 2012 CFR

2012-10-01

... incentive performance elements. 1609.7101-1 Section 1609.7101-1 Federal Acquisition Regulations System... performance elements. (a) Customer Service. This element is intended to assist OPM in achieving the goal of... and other measures as required contractually between OPM and the carrier. (This element will be...

48 CFR 1609.7101-1 - Community-rated carrier incentive performance elements.

Code of Federal Regulations, 2014 CFR

2014-10-01

... incentive performance elements. 1609.7101-1 Section 1609.7101-1 Federal Acquisition Regulations System... performance elements. (a) Customer Service. This element is intended to assist OPM in achieving the goal of... and other measures as required contractually between OPM and the carrier. (This element will be...

48 CFR 1609.7101-1 - Community-rated carrier incentive performance elements.

Code of Federal Regulations, 2013 CFR

2013-10-01

... incentive performance elements. 1609.7101-1 Section 1609.7101-1 Federal Acquisition Regulations System... performance elements. (a) Customer Service. This element is intended to assist OPM in achieving the goal of... and other measures as required contractually between OPM and the carrier. (This element will be...

N plus 3 Advanced Concept Studies for Supersonic Commercial Transport Aircraft Entering Service in the 2030-2035 Period

NASA Technical Reports Server (NTRS)

Welge, H. Robert; Bonet, John; Magee, Todd; Tompkins, Daniel; Britt, Terry R.; Nelson, Chet; Miller, Gregory; Stenson, Douglas; Staubach, J. Brent; Bala, Naushir;

Autonomous Assembly of Modular Structures in Space and on Extraterrestrial Locations

NASA Astrophysics Data System (ADS)

Alhorn, Dean C.

2005-02-01

The new U.S. National Vision for Space Exploration requires many new enabling technologies to accomplish the goals of space commercialization and returning humans to the moon and extraterrestrial environments. Traditionally, flight elements are complete sub-systems requiring humans to complete the integration and assembly. These bulky structures also require the use of heavy launch vehicles to send the units to a desired location. This philosophy necessitates a high degree of safety, numerous space walks at a significant cost. Future space mission costs must be reduced and safety increased to reasonably achieve exploration goals. One proposed concept is the autonomous assembly of space structures. This concept is an affordable, reliable solution to in-space and extraterrestrial assembly. Assembly is autonomously performed when two components join after determining that specifications are correct. Local sensors continue monitor joint integrity post assembly, which is critical for safety and structural reliability. Achieving this concept requires a change in space structure design philosophy and the development of innovative technologies to perform autonomous assembly. Assembly of large space structures will require significant numbers of integrity sensors. Thus simple, low-cost sensors are integral to the success of this concept. This paper addresses these issues and proposes a novel concept for assembling space structures autonomously. Core technologies required to achieve in space assembly are presented. These core technologies are critical to the goal of utilizing space in a cost efficient and safe manner. Additionally, these novel technologies can be applied to other systems both on earth and extraterrestrial environments.

Autonomous Assembly of Modular Structures in Space and on Extraterrestrial Locations

NASA Technical Reports Server (NTRS)

Alhorn, Dean C.

2005-01-01

The new U.S. National Vision for Space Exploration requires many new enabling technologies to accomplish the goals of space commercialization and returning humans to the moon and extraterrestrial environments. Traditionally, flight elements are complete subsystems requiring humans to complete the integration and assembly. These bulky structures also require the use of heavy launch vehicles to send the units to a desired location. This philosophy necessitates a high degree of safety, numerous space walks at a significant cost. Future space mission costs must be reduced and safety increased to reasonably achieve exploration goals. One proposed concept is the autonomous assembly of space structures. This concept is an affordable, reliable solution to in-space and extraterrestrial assembly. Assembly is autonomously performed when two components join after determining that specifications are correct. Local sensors continue monitor joint integrity post assembly, which is critical for safety and structural reliability. Achieving this concept requires a change in space structure design philosophy and the development of innovative technologies to perform autonomous assembly. Assembly of large space structures will require significant numbers of integrity sensors. Thus simple, low-cost sensors are integral to the success of this concept. This paper addresses these issues and proposes a novel concept for assembling space structures autonomously. Core technologies required to achieve in space assembly are presented. These core technologies are critical to the goal of utilizing space in a cost efficient and safe manner. Additionally, these novel technologies can be applied to other systems both on earth and extraterrestrial environments.

Multiple EFG silicon ribbon technology as the basis for manufacturing low-cost terrestrial solar cells. [Epitaxial Film Growth

NASA Technical Reports Server (NTRS)

Mackintosh, B.; Kalejs, J. P.; Ho, C. T.; Wald, F. V.

1981-01-01

Mackintosh et al. (1978) have reported on the development of a multiple ribbon furnace based on the 'edge defined film fed growth' (EFG) process for the fabrication of silicon ribbon. It has been demonstrated that this technology can meet the requirements for a silicon substrate material to be used in the manufacture of solar panels which can meet requirements regarding a selling price of $0.70/Wp when certain goals in terms of throughput and quality are achieved. These goals for the multiple ribbon technology using 10 cm wide ribbon require simultaneous growth of 12 ribbons by one operator at average speeds of 4 to 4.5 cm/min, and 13% efficient solar cells. A description is presented of the progress made toward achieving these goals. It is concluded that the required performance levels have now been achieved. The separate aspects of technology must now be integrated into a single prototype furnace.

Material requirements for the High Speed Civil Transport

NASA Technical Reports Server (NTRS)

Stephens, Joseph R.; Hecht, Ralph J.; Johnson, Andrew M.

1993-01-01

Under NASA-sponsored High Speed Research (HSR) programs, the materials and processing requirements have been identified for overcoming the environmental and economic barriers of the next generation High Speed Civil Transport (HSCT) propulsion system. The long (2 to 5 hours) supersonic cruise portion of the HSCT cycle will place additional durability requirements on all hot section engine components. Low emissions combustor designs will require high temperature ceramic matrix composite liners to meet an emission goal of less than 5g NO(x) per Kg fuel burned. Large axisymmetric and two-dimensional exhaust nozzle designs are now under development to meet or exceed FAR 36 Stage III noise requirements, and will require lightweight, high temperature metallic, intermetallic, and ceramic matrix composites to reduce nozzle weight and meet structural and acoustic component performance goals. This paper describes and discusses the turbomachinery, combustor, and exhaust nozzle requirements of the High Speed Civil Transport propulsion system.

An approach for configuring space photovoltaic tandem arrays based on cell layer performance

NASA Technical Reports Server (NTRS)

Flora, C. S.; Dillard, P. A.

1991-01-01

Meeting solar array performance goals of 300 W/Kg requires use of solar cells with orbital efficiencies greater than 20 percent. Only multijunction cells and cell layers operating in tandem produce this required efficiency. An approach for defining solar array design concepts that use tandem cell layers involve the following: transforming cell layer performance at standard test conditions to on-orbit performance; optimizing circuit configuration with tandem cell layers; evaluating circuit sensitivity to cell current mismatch; developing array electrical design around selected circuit; and predicting array orbital performance including seasonal variations.

Advanced electric propulsion system concept for electric vehicles

NASA Technical Reports Server (NTRS)

Raynard, A. E.; Forbes, F. E.

1979-01-01

Seventeen propulsion system concepts for electric vehicles were compared to determine the differences in components and battery pack to achieve the basic performance level. Design tradeoffs were made for selected configurations to find the optimum component characteristics required to meet all performance goals. The anticipated performance when using nickel-zinc batteries rather than the standard lead-acid batteries was also evaluated. The two systems selected for the final conceptual design studies included a system with a flywheel energy storage unit and a basic system that did not have a flywheel. The flywheel system meets the range requirement with either lead-acid or nickel-zinc batteries and also the acceleration of zero to 89 km/hr in 15 s. The basic system can also meet the required performance with a fully charged battery, but, when the battery approaches 20 to 30 percent depth of discharge, maximum acceleration capability gradually degrades. The flywheel system has an estimated life-cycle cost of $0.041/km using lead-acid batteries. The basic system has a life-cycle cost of $0.06/km. The basic system, using batteries meeting ISOA goals, would have a life-cycle cost of $0.043/km.

Factors influencing analysis of complex cognitive tasks: a framework and example from industrial process control.

PubMed

Prietula, M J; Feltovich, P J; Marchak, F

2000-01-01

We propose that considering four categories of task factors can facilitate knowledge elicitation efforts in the analysis of complex cognitive tasks: materials, strategies, knowledge characteristics, and goals. A study was conducted to examine the effects of altering aspects of two of these task categories on problem-solving behavior across skill levels: materials and goals. Two versions of an applied engineering problem were presented to expert, intermediate, and novice participants. Participants were to minimize the cost of running a steam generation facility by adjusting steam generation levels and flows. One version was cast in the form of a dynamic, computer-based simulation that provided immediate feedback on flows, costs, and constraint violations, thus incorporating key variable dynamics of the problem context. The other version was cast as a static computer-based model, with no dynamic components, cost feedback, or constraint checking. Experts performed better than the other groups across material conditions, and, when required, the presentation of the goal assisted the experts more than the other groups. The static group generated richer protocols than the dynamic group, but the dynamic group solved the problem in significantly less time. Little effect of feedback was found for intermediates, and none for novices. We conclude that demonstrating differences in performance in this task requires different materials than explicating underlying knowledge that leads to performance. We also conclude that substantial knowledge is required to exploit the information yielded by the dynamic form of the task or the explicit solution goal. This simple model can help to identify the contextual factors that influence elicitation and specification of knowledge, which is essential in the engineering of joint cognitive systems.

Propellant Feed Subsystem for the X-34 Main Propulsion System

NASA Technical Reports Server (NTRS)

McDonald, J. P.; Minor, R. B.; Knight, K. C.; Champion, R. H., Jr.; Russell, F. J., Jr.

1998-01-01

The Orbital Sciences Corporation X-34 vehicle demonstrates technologies and operations key to future reusable launch vehicles. The general flight performance goal of this unmanned rocket plane is Mach 8 flight at an altitude of 250,000 feet. The Main Propulsion System supplies liquid propellants to the main engine, which provides the primary thrust for attaining mission goals. Major NMS design and operational goals are aircraft-like ground operations, quick turnaround between missions, and low initial/operational costs. This paper reviews major design and analysis aspects of the X-34 propellant feed subsystem of the X-34 Main Propulsion System. Topics include system requirements, system design, the integration of flight and feed system performance, propellant acquisition at engine start, and propellant tank terminal drain.

Grit and the Information Systems Student: A Discipline-Specific Examination of Perseverance and Passion for Long Term Goals

ERIC Educational Resources Information Center

Brooks, Nita G.; Seipel, Scott J.

2018-01-01

Grit has been highlighted in recent research as a distinct trait believed to be associated with performance and success factors above and beyond those explained by cognitive ability. It focuses on the dedication required to meet long-term goals and is represented by two subscales: consistency of interest and perseverance of effort. The overall…

Engine design considerations for 2nd generation supersonic transports

NASA Technical Reports Server (NTRS)

Howlett, R. A.

1975-01-01

The environmental and economic goals projected for advanced supersonic transports will require revolutionary improvements in propulsion systems. Variable cycle engine concepts that incorporate unique components and advanced technologies show promise in meeting these goals. Pratt & Whitney Aircraft is conducting conceptual design studies of variable cycle engine concepts under NASA sponsorship. This paper reviews some of the design considerations for these engine concepts. Emphasis is placed on jet noise abatement, reduction of emissions, performance improvements, installation considerations, hot-section characteristics and control system requirements. Two representative variable cycle engine concepts that incorporate these basic design considerations are described.

Real-time operating system for selected Intel processors

NASA Technical Reports Server (NTRS)

Pool, W. R.

1980-01-01

The rationale for system development is given along with reasons for not using vendor supplied operating systems. Although many system design and performance goals were dictated by problems with vendor supplied systems, other goals surfaced as a result of a design for a custom system able to span multiple projects. System development and management problems and areas that required redesign or major code changes for system implementation are examined as well as the relative successes of the initial projects. A generic description of the actual project is provided and the ongoing support requirements and future plans are discussed.

Sustainable development goals and the human resources crisis.

PubMed

Freer, Joseph

2017-01-01

Achieving universal health coverage by 2030 requires that lessons from the Millennium Development Goals must be heeded. The most important lesson is that the workforce underpins every function of the health system, and is the rate-limiting step. The three dimensions that continue to limit the success of the development agenda are availability, distribution and performance of health workers - and the Sustainable Development Goals cannot be achieved without addressing all three. Hence, the traditional response of scaling up supply is inadequate: a paradigm shift is required in the design of systems that can properly identify, train, allocate and retain health workers. © The Author 2016. Published by Oxford University Press on behalf of Royal Society of Tropical Medicine and Hygiene. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Detection of Bladder CA by Microsatellite Analysis (MSA) — EDRN Public Portal

Cancer.gov

Goal 1: To determine sensitivity and specificity of microsatellite analysis (MSA) of urine sediment, using a panel of 15 microsatellite markers, in detecting bladder cancer in participants requiring cystoscopy. This technique will be compared to the diagnostic standard of cystoscopy, as well as to urine cytology. Goal 2: To determine the temporal performance characteristics of microsatellite analysis of urine sediment. Goal 3: To determine which of the 15 individual markers or combination of markers that make up the MSA test are most predictive of the presence of bladder cancer.

20 CFR 661.230 - What are the requirements for modification of the State Workforce Investment Plan?

Code of Federal Regulations, 2011 CFR

2011-04-01

..., performance indicators, the methodology used to determine local allocation of funds, reorganizations which change the working relationship with system employees, changes in organizational responsibilities... changes to the State's workforce investment system. (3) The State has failed to meet performance goals...

20 CFR 661.230 - What are the requirements for modification of the State Workforce Investment Plan?

Code of Federal Regulations, 2010 CFR

2010-04-01

..., performance indicators, the methodology used to determine local allocation of funds, reorganizations which change the working relationship with system employees, changes in organizational responsibilities... changes to the State's workforce investment system. (3) The State has failed to meet performance goals...

The carry-over effect of competition in task-sharing: evidence from the joint Simon task.

PubMed

Iani, Cristina; Anelli, Filomena; Nicoletti, Roberto; Rubichi, Sandro

2014-01-01

The Simon effect, that is the advantage of the spatial correspondence between stimulus and response locations when stimulus location is a task-irrelevant dimension, occurs even when the task is performed together by two participants, each performing a go/no-go task. Previous studies showed that this joint Simon effect, considered by some authors as a measure of self-other integration, does not emerge when during task performance co-actors are required to compete. The present study investigated whether and for how long competition experienced during joint performance of one task can affect performance in a following joint Simon task. In two experiments, we required pairs of participants to perform together a joint Simon task, before and after jointly performing together an unrelated non-spatial task (the Eriksen flanker task). In Experiment 1, participants always performed the joint Simon task under neutral instructions, before and after performing the joint flanker task in which they were explicitly required either to cooperate with (i.e., cooperative condition) or to compete against a co-actor (i.e., competitive condition). In Experiment 2, they were required to compete during the joint flanker task and to cooperate during the subsequent joint Simon task. Competition experienced in one task affected the way the subsequent joint task was performed, as revealed by the lack of the joint Simon effect, even though, during the Simon task participants were not required to compete (Experiment 1). However, prior competition no longer affected subsequent performance if a new goal that created positive interdependence between the two agents was introduced (Experiment 2). These results suggest that the emergence of the joint Simon effect is significantly influenced by how the goals of the co-acting individuals are related, with the effect of competition extending beyond the specific competitive setting and affecting subsequent interactions.

The California Critical Thinking Skills Test and Business School Performance

ERIC Educational Resources Information Center

Bycio, Peter; Allen, Joyce S.

2009-01-01

An intent of many business programs is to enhance the critical thinking capabilities of their students. Since AACSB accreditation requires evidence that business schools fulfill their goals, our students were required to take the California Critical Thinking Skills Test (CCTST). As expected, the CCTST was significantly related to SAT performance…

Divided Attention and Processes Underlying Sense of Agency

PubMed Central

Wen, Wen; Yamashita, Atsushi; Asama, Hajime

2016-01-01

Sense of agency refers to the subjective feeling of controlling events through one’s behavior or will. Sense of agency results from matching predictions of one’s own actions with actual feedback regarding the action. Furthermore, when an action involves a cued goal, performance-based inference contributes to sense of agency. That is, if people achieve their goal, they would believe themselves to be in control. Previous studies have shown that both action-effect comparison and performance-based inference contribute to sense of agency; however, the dominance of one process over the other may shift based on task conditions such as the presence or absence of specific goals. In this study, we examined the influence of divided attention on these two processes underlying sense of agency in two conditions. In the experimental task, participants continuously controlled a moving dot for 10 s while maintaining a string of three or seven digits in working memory. We found that when there was no cued goal (no-cued-goal condition), sense of agency was impaired by high cognitive load. Contrastingly, when participants controlled the dot based on a cued goal (cued-goal-directed condition), their sense of agency was lower than in the no-cued-goal condition and was not affected by cognitive load. The results suggest that the action-effect comparison process underlying sense of agency requires attention. On the other hand, the weaker influence of divided attention in the cued-goal-directed condition could be attributed to the dominance of performance-based inference, which is probably automatic. PMID:26858680

Flight Control Laws for NASA's Hyper-X Research Vehicle

NASA Technical Reports Server (NTRS)

Davidson, J.; Lallman, F.; McMinn, J. D.; Martin, J.; Pahle, J.; Stephenson, M.; Selmon, J.; Bose, D.

1999-01-01

The goal of the Hyper-X program is to demonstrate and validate technology for design and performance predictions of hypersonic aircraft with an airframe-integrated supersonic-combustion ramjet propulsion system. Accomplishing this goal requires flight demonstration of a hydrogen-fueled scramjet powered hypersonic aircraft. A key enabling technology for this flight demonstration is flight controls. Closed-loop flight control is required to enable a successful stage separation, to achieve and maintain the design condition during the engine test, and to provide a controlled descent. Before the contract award, NASA developed preliminary flight control laws for the Hyper-X to evaluate the feasibility of the proposed scramjet test sequence and descent trajectory. After the contract award, a Boeing/NASA partnership worked to develop the current control laws. This paper presents a description of the Hyper-X Research Vehicle control law architectures with performance and robustness analyses. Assessments of simulated flight trajectories and stability margin analyses demonstrate that these control laws meet the flight test requirements.

Thematic mapper critical elements breadboard program

NASA Technical Reports Server (NTRS)

Dale, C. H., Jr.; Engel, J. L.; Harney, E. D.

1976-01-01

A 40.6 cm bidirectional scan mirror assembly, a scan line corrector and a silicon photodiode array with integral preamplifier input stages were designed, fabricated, and tested to demonstrate performance consistent with requirements of the Hughes thematic mapper system. The measured performance met or exceeded the original design goals in all cases with the qualification that well defined and well understood deficiencies in the design of the photodiode array package will require the prescribed corrections before flight use.

The architecture of the High Performance Storage System (HPSS)

NASA Technical Reports Server (NTRS)

Teaff, Danny; Watson, Dick; Coyne, Bob

1994-01-01

The rapid growth in the size of datasets has caused a serious imbalance in I/O and storage system performance and functionality relative to application requirements and the capabilities of other system components. The High Performance Storage System (HPSS) is a scalable, next-generation storage system that will meet the functionality and performance requirements or large-scale scientific and commercial computing environments. Our goal is to improve the performance and capacity of storage by two orders of magnitude or more over what is available in the general or mass marketplace today. We are also providing corresponding improvements in architecture and functionality. This paper describes the architecture and functionality of HPSS.

Enhanced Vision for All-Weather Operations Under NextGen

NASA Technical Reports Server (NTRS)

Bailey, Randall E.; Kramer, Lynda J.; Williams, Steven P.; Bailey, Randall E.; Kramer, Lynda J.; Williams, Steven P.

2010-01-01

Recent research in Synthetic/Enhanced Vision technology is analyzed with respect to existing Category II/III performance and certification guidance. The goal is to start the development of performance-based vision systems technology requirements to support future all-weather operations and the NextGen goal of Equivalent Visual Operations. This work shows that existing criteria to operate in Category III weather and visibility are not directly applicable since, unlike today, the primary reference for maneuvering the airplane is based on what the pilot sees visually through the "vision system." New criteria are consequently needed. Several possible criteria are discussed, but more importantly, the factors associated with landing system performance using automatic and manual landings are delineated.

Comparative study of goal contents and goal characteristics between medical and business students.

PubMed

Park, Soowon; Kim, Ji Eun; Lee, Jun-Young; Shin, Jongho

2016-03-01

Medical and business are one of the most popular majors among students, and both fields require intensive training to reach certain level of expertise. During the development of professionalism, goal can become a crucial role in psychological impetus. The purpose of this study is to compare goal contents, goal characteristics, and effect of goal characteristics on student's major satisfaction between medical and business. A total of 193 undergraduate students (97 medical students, 96 business students) answered survey questions including goal contents, goal characteristics (goal autonomy, goal attainability, social value of goal) and satisfaction on their majors. Qualitative analysis of goal contents and quantitative analysis of goal characteristics, and their effects on student major satisfaction were performed. Goal content analysis showed percentage of social concern goal was higher in medical students (25.8%) than business students (6.3%), whereas percentage of wealth goal was higher business students (24.0%) than medical students (3.1%). Among goal characteristics, goal attainability and social value of goal were higher in medical students than business students. In both groups, social value of goal was significantly predict major satisfaction. Goal contents and goal characteristics are different between medical and business students. Curriculum and educational interventions that concerning students' goal and developing programs to enhance students' social value of goal is necessary.

Gas Turbine Characteristics for a Large Civil Tilt-Rotor (LCTR)

NASA Technical Reports Server (NTRS)

Snyder, Christopher A.; Thurman, Douglas R.

2010-01-01

In support of the Fundamental Aeronautics Program, Subsonic Rotary Wing Project; an engine system study has been undertaken to help define and understand some of the major gas turbine engine parameters required to meet performance and weight requirements as defined by earlier vehicle system studies. These previous vehicle studies will be reviewed to help define gas turbine performance goals. Assumptions and analysis methods used will be described. Performance and weight estimates for a few conceptual gas turbine engines meeting these requirements will be given and discussed. Estimated performance for these conceptual engines over a wide speed variation (down to 50 percent power turbine rpm at high torque) will be presented. Finally, areas needing further effort will be suggested and discussed.

Flat-plate solar array project. Volume 5: Process development

NASA Technical Reports Server (NTRS)

Gallagher, B.; Alexander, P.; Burger, D.

1986-01-01

The goal of the Process Development Area, as part of the Flat-Plate Solar Array (FSA) Project, was to develop and demonstrate solar cell fabrication and module assembly process technologies required to meet the cost, lifetime, production capacity, and performance goals of the FSA Project. R&D efforts expended by Government, Industry, and Universities in developing processes capable of meeting the projects goals during volume production conditions are summarized. The cost goals allocated for processing were demonstrated by small volume quantities that were extrapolated by cost analysis to large volume production. To provide proper focus and coverage of the process development effort, four separate technology sections are discussed: surface preparation, junction formation, metallization, and module assembly.

Benefits estimates of highway capital improvements with uncertain parameters.

DOT National Transportation Integrated Search

2006-01-01

This report warrants consideration in the development of goals, performance measures, and standard cost-benefit methodology required of transportation agencies by the Virginia 2006 Appropriations Act. The Virginia Department of Transportation has beg...

Highly Dispersed Alloy Catalyst for Durability

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vivek S. Murthi; Izzo, Elise; Bi, Wu

2013-01-08

Achieving DOE's stated 5000-hr durability goal for light-duty vehicles by 2015 will require MEAs with characteristics that are beyond the current state of the art. Significant effort was placed on developing advanced durable cathode catalysts to arrive at the best possible electrode for high performance and durability, as well as developing manufacturing processes that yield significant cost benefit. Accordingly, the overall goal of this project was to develop and construct advanced MEAs that will improve performance and durability while reducing the cost of PEMFC stacks. The project, led by UTC Power, focused on developing new catalysts/supports and integrating them withmore » existing materials (membranes and gas diffusion layers (GDLs)) using state-of-the-art fabrication methods capable of meeting the durability requirements essential for automotive applications. Specifically, the project work aimed to lower platinum group metals (PGM) loading while increasing performance and durability. Appropriate catalysts and MEA configuration were down-selected that protects the membrane, and the layers were tailored to optimize the movements of reactants and product water through the cell to maximize performance while maintaining durability.« less

Drivers of Dashboard Development (3-D): A Curricular Continuous Quality Improvement Approach.

PubMed

Shroyer, A Laurie; Lu, Wei-Hsin; Chandran, Latha

2016-04-01

Undergraduate medical education (UME) programs are seeking systematic ways to monitor and manage their educational performance metrics and document their achievement of external goals (e.g., Liaison Committee on Medical Education [LCME] accreditation requirements) and internal objectives (institution-specific metrics). In other continuous quality improvement (CQI) settings, summary dashboard reports have been used to evaluate and improve performance. The Stony Brook University School of Medicine UME leadership team developed and implemented summary dashboard performance reports in 2009 to document LCME standards/criteria compliance, evaluate medical student performance, and identify progress in attaining institutional curricular goals and objectives. Key performance indicators (KPIs) and benchmarks were established and have been routinely monitored as part of the novel Drivers of Dashboard Development (3-D) approach to curricular CQI. The systematic 3-D approach has had positive CQI impacts. Substantial improvements over time have been documented in KPIs including timeliness of clerkship grades, midclerkship feedback, student mistreatment policy awareness, and student satisfaction. Stakeholder feedback indicates that the dashboards have provided useful information guiding data-driven curricular changes, such as integrating clinician-scientists as lecturers in basic science courses to clarify the clinical relevance of specific topics. Gaining stakeholder acceptance of the 3-D approach required clear communication of preestablished targets and annual meetings with department leaders and course/clerkship directors. The 3-D approach may be considered by UME programs as a template for providing faculty and leadership with a CQI framework to establish shared goals, document compliance, report accomplishments, enrich communications, facilitate decisions, and improve performance.

The success of the X-33 depends on its technology—an overview

NASA Astrophysics Data System (ADS)

Bunting, Jackie O.; Sasso, Steven E.

1996-03-01

The success of the X-33, and therefore the Reusable Launch Vehicle (RLV) program, is highly dependent on the maturity of the components and subsystems selected and the ability to verify their performance, cost, and operability goals. The success of the technology that will be developed to support these components and subsystems will be critical to developing an operationally efficient X-33 that is traceable to a full-scale RLV system. This paper will delineate the key objectives of each technology demonstration area and provide an assessment of its ability to meet the X-33/RLV requirements. It is our intent to focus on these key technology areas to achieve the ambitious but achievable goals of the RLV and X-33 programs. Based on our assessment of the X-33 and RLV systems, we have focused on the performance verification and validation of the linear aerospike engine. This engine, first developed in the mid-1960s, shows promise in achieving the RLV objectives. Equally critical to the engine selection is the development of cryogenic composite tanks and the associated health management system required to meet the operability goals. We are also developing a highly reusable form of thermal protection system based on years of hypersonic research and Space Shuttle experience. To meet the mass fraction goals, reduction in engine component weights will also be developed. Due to the high degree of operability required, we will investigate the use of real-time integrated system health management and propulsion systems diagnostics, and mature the use of electromechanical actuators for highly reusable systems. The rapid turn-around requirements will require an adaptive guidance, navigation, and control algorithm toolset, which is well underway. We envision our X-33 and RLV to use mature, low-risk technologies that will allow truly low-cost access to space (Lockheed Martin Internal Document, 1995).

Combustor Simulation

NASA Technical Reports Server (NTRS)

Norris, Andrew

2003-01-01

The goal was to perform 3D simulation of GE90 combustor, as part of full turbofan engine simulation. Requirements of high fidelity as well as fast turn-around time require massively parallel code. National Combustion Code (NCC) was chosen for this task as supports up to 999 processors and includes state-of-the-art combustion models. Also required is ability to take inlet conditions from compressor code and give exit conditions to turbine code.

Management and Rehabilitation of Joint Disease in Sport Horses.

PubMed

Contino, Erin K

2018-05-21

Joint disease is one of the most common issues effecting sport horses. Because there is no cure for joint disease, treatment goals surround slowing progression of the disease, minimizing pain, increasing function, and optimizing performance. Accomplishing these goals often requires a multimodal approach that combines systemic medications or supplements; intra-articular therapies, such as corticosteroids or biologics; management considerations; and physical therapy exercises. Copyright © 2018 Elsevier Inc. All rights reserved.

Behavioral Health and Performance (BHP) Work-Rest Cycles

NASA Technical Reports Server (NTRS)

Leveton, Lauren B.; Whitmire, Alexandra

2011-01-01

BHP Program Element Goal: Identify, characterize, and prevent or reduce behavioral health and performance risks associated with space travel, exploration and return to terrestrial life. BHP Requirements: a) Characterize and assess risks (e.g., likelihood and consequences). b) Develop tools and technologies to prevent, monitor, and treat adverse outcomes. c) Inform standards. d) Develop technologies to: 1) reduce risks and human systems resource requirements (e.g., crew time, mass, volume, power) and 2) ensure effective human-system integration across exploration mission.

Requirements for the conceptual design of advanced underground coal extraction systems

NASA Technical Reports Server (NTRS)

Gangal, M. D.; Lavin, M. L.

1981-01-01

Conceptual design requirements are presented for underground coal mining systems having substantially improved performance in the areas of production cost and miner safety. Mandatory performance levels are also set for miner health, environmental impact, and coal recovery. In addition to mandatory design goals and constraints, a number of desirable system characteristics are identified which must be assessed in terms of their impact on production cost and their compatibility with other system elements. Although developed for the flat lying, moderately thick seams of Central Appalachia, these requirements are designed to be easily adaptable to other coals.

Autonomous Assembly of Modular Structures in Space and on Extraterrestrial Locations

NASA Technical Reports Server (NTRS)

Alhorn, Dean C.

2005-01-01

The fulfillment of the new US. National Vision for Space Exploration requires many new enabling technologies to accomplish the goal of utilizing space for commercial activities and for returning humans to the moon and extraterrestrial environments. Traditionally, flight structures are manufactured as complete systems and require humans to complete the integration and assembly in orbit. These structures are bulky and require the use of heavy launch vehicles to send the units to the desired location, e.g. International Space Station (ISS). This method requires a high degree of safety, numerous space walks and significant cost for the humans to perform the assembly in orbit. For example, for assembly and maintenance of the ISS, 52 Extravehicular Activities (EVA's) have been performed so far with a total EVA time of approximately 322 hours. Sixteen (16) shuttle flights haw been to the ISS to perform these activities with an approximate cost of $450M per mission. For future space missions, costs have to be reduced to reasonably achieve the exploration goals. One concept that has been proposed is the autonomous assembly of space structures. This concept is an affordable, reliable solution to in-space and extraterrestrial assembly operations. Assembly is autonomously performed when two components containing onboard electronics join after recognizing that the joint is appropriate and in the precise position and orientation required for assembly. The mechanism only activates when the specifications are correct and m a nominal range. After assembly, local sensors and electronics monitor the integrity of the joint for feedback to a master controller. To achieve this concept will require a shift in the methods for designing space structures. In addition, innovative techniques will be required to perform the assembly autonomously. Monitoring of the assembled joint will be necessary for safety and structural integrity. If a very large structure is to be assembled in orbit, then the number of integrity sensors will be significant. Thus simple, low cost sensors are integral to the success of this concept. This paper will address these issues and will propose a novel concept for assembling space structures autonomously. The paper will present Several autonomous assembly methods. Core technologies required to achieve in space assembly will be discussed and novel techniques for communicating, sensing, docking and assembly will be detailed. These core technologies are critical to the goal of utilizing space in a cost efficient and safe manner. Finally, these technologies can also be applied to other systems both on earth and extraterrestrial environments.

Performance considerations in long-term spaceflight

NASA Technical Reports Server (NTRS)

Akins, F. R.

1979-01-01

Maintenance of skilled performance during extended space flight is of critical importance to both the health and safety of crew members and to the overall success of mission goals. An examination of long term effects and performance requirements is therefore a factor of immense importance to the planning of future missions. Factors that were investigated include: definition of performance categories to be investigated; methods for assessing and predicting performance levels; in-flight factors which can affect performance; and factors pertinent to the maintenance of skilled performance.

High performance flexible heat pipes

NASA Technical Reports Server (NTRS)

Shaubach, R. M.; Gernert, N. J.

1985-01-01

A Phase I SBIR NASA program for developing and demonstrating high-performance flexible heat pipes for use in the thermal management of spacecraft is examined. The program combines several technologies such as flexible screen arteries and high-performance circumferential distribution wicks within an envelope which is flexible in the adiabatic heat transport zone. The first six months of work during which the Phase I contract goal were met, are described. Consideration is given to the heat-pipe performance requirements. A preliminary evaluation shows that the power requirement for Phase II of the program is 30.5 kilowatt meters at an operating temperature from 0 to 100 C.

Remediation of social communication impairments following traumatic brain injury using metacognitive strategy intervention: a pilot study.

PubMed

Finch, Emma; Cornwell, Petrea; Copley, Anna; Doig, Emmah; Fleming, Jennifer

2017-01-01

To perform a pilot study to evaluate whether a novel metacognitive, goal-based intervention improved and maintained the social communication skills of adults with traumatic brain injury (TBI). Eight community-dwelling participants with TBI completed three study phases: (1) baseline, (2) eight-week intervention targeting social communication impairments and (3) follow-up. Participants completed the Profile of Pragmatic Impairment in Communication (PPIC), LaTrobe Communication Questionnaire (LCQ) and Goal Attainment Scaling (GAS) at the commencement of baseline phase, pre- and post-intervention and completion of the follow-up phase. During the intervention programme phase, participants attended two 1-hour therapy sessions (one individual; one group) per week focusing on remediating impaired social communication skills using metacognitive strategy intervention and goal-based therapy. Variable changes in PPIC feature-summary scores were observed post-intervention. A non-significant improvement in LCQ scores was also observed. There was a significant increase in GAS goal T-scores following the intervention, with six of the eight participants achieving or exceeding their expected level of performance on all goals. A goal-driven, metacognitive approach to intervention may assist individuals with TBI to achieve their personal social communication goals, with benefits reported by participants and observable during conversations. Further research is required.

Measuring strategic success.

PubMed

Gish, Ryan

2002-08-01

Strategic triggers and metrics help healthcare providers achieve financial success. Metrics help assess progress toward long-term goals. Triggers signal market changes requiring a change in strategy. All metrics may not move in concert. Organizations need to identify indicators, monitor performance.

A Trajectory Generation Approach for Payload Directed Flight

NASA Technical Reports Server (NTRS)

Ippolito, Corey A.; Yeh, Yoo-Hsiu

2009-01-01

Presently, flight systems designed to perform payload-centric maneuvers require preconstructed procedures and special hand-tuned guidance modes. To enable intelligent maneuvering via strong coupling between the goals of payload-directed flight and the autopilot functions, there exists a need to rethink traditional autopilot design and function. Research into payload directed flight examines sensor and payload-centric autopilot modes, architectures, and algorithms that provide layers of intelligent guidance, navigation and control for flight vehicles to achieve mission goals related to the payload sensors, taking into account various constraints such as the performance limitations of the aircraft, target tracking and estimation, obstacle avoidance, and constraint satisfaction. Payload directed flight requires a methodology for accurate trajectory planning that lets the system anticipate expected return from a suite of onboard sensors. This paper presents an extension to the existing techniques used in the literature to quickly and accurately plan flight trajectories that predict and optimize the expected return of onboard payload sensors.

External Tank Program Legacy of Success

NASA Technical Reports Server (NTRS)

Welzyn, Ken; Pilet, Jeff

2010-01-01

I.Goal: a) Extensive TPS damage caused by extreme hail storm. b) Repair plan required to restore TPS to minimize program manifest impacts. II. Challenges: a) Skeptical technical community - Concerned about interactions of damage with known/unknown failure modes. b) Schedule pressure to accommodate ISS program- Next tank still at MAF c)Limited ET resources. III. How d We Do It?: a) Developed unique engineering requirements and tooling to minimize repairs. b) Performed large amount of performance testing to demonstrate understanding of repairs and residual conditions. c) Effectively communicated results to technical community and management to instill confidence in expected performance.

ASC-ATDM Performance Portability Requirements for 2015-2019

DOE Office of Scientific and Technical Information (OSTI.GOV)

Edwards, Harold C.; Trott, Christian Robert

This report outlines the research, development, and support requirements for the Advanced Simulation and Computing (ASC ) Advanced Technology, Development, and Mitigation (ATDM) Performance Portability (a.k.a., Kokkos) project for 2015 - 2019 . The research and development (R&D) goal for Kokkos (v2) has been to create and demonstrate a thread - parallel programming model a nd standard C++ library - based implementation that enables performance portability across diverse manycore architectures such as multicore CPU, Intel Xeon Phi, and NVIDIA Kepler GPU. This R&D goal has been achieved for algorithms that use data parallel pat terns including parallel - for, parallelmore » - reduce, and parallel - scan. Current R&D is focusing on hierarchical parallel patterns such as a directed acyclic graph (DAG) of asynchronous tasks where each task contain s nested data parallel algorithms. This five y ear plan includes R&D required to f ully and performance portably exploit thread parallelism across current and anticipated next generation platforms (NGP). The Kokkos library is being evaluated by many projects exploring algorithm s and code design for NGP. Some production libraries and applications such as Trilinos and LAMMPS have already committed to Kokkos as their foundation for manycore parallelism an d performance portability. These five year requirements includes support required for current and antic ipated ASC projects to be effective and productive in their use of Kokkos on NGP. The greatest risk to the success of Kokkos and ASC projects relying upon Kokkos is a lack of staffing resources to support Kokkos to the degree needed by these ASC projects. This support includes up - to - date tutorials, documentation, multi - platform (hardware and software stack) testing, minor feature enhancements, thread - scalable algorithm consulting, and managing collaborative R&D.« less

Extreme-scale Algorithms and Solver Resilience

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dongarra, Jack

A widening gap exists between the peak performance of high-performance computers and the performance achieved by complex applications running on these platforms. Over the next decade, extreme-scale systems will present major new challenges to algorithm development that could amplify this mismatch in such a way that it prevents the productive use of future DOE Leadership computers due to the following; Extreme levels of parallelism due to multicore processors; An increase in system fault rates requiring algorithms to be resilient beyond just checkpoint/restart; Complex memory hierarchies and costly data movement in both energy and performance; Heterogeneous system architectures (mixing CPUs, GPUs,more » etc.); and Conflicting goals of performance, resilience, and power requirements.« less

Comparative study of goal contents and goal characteristics between medical and business students

PubMed Central

Park, Soowon; Kim, Ji Eun; Lee, Jun-Young; Shin, Jongho

2016-01-01

Purpose: Medical and business are one of the most popular majors among students, and both fields require intensive training to reach certain level of expertise. During the development of professionalism, goal can become a crucial role in psychological impetus. The purpose of this study is to compare goal contents, goal characteristics, and effect of goal characteristics on student’s major satisfaction between medical and business. Methods: A total of 193 undergraduate students (97 medical students, 96 business students) answered survey questions including goal contents, goal characteristics (goal autonomy, goal attainability, social value of goal) and satisfaction on their majors. Qualitative analysis of goal contents and quantitative analysis of goal characteristics, and their effects on student major satisfaction were performed. Results: Goal content analysis showed percentage of social concern goal was higher in medical students (25.8%) than business students (6.3%), whereas percentage of wealth goal was higher business students (24.0%) than medical students (3.1%). Among goal characteristics, goal attainability and social value of goal were higher in medical students than business students. In both groups, social value of goal was significantly predict major satisfaction. Conclusion: Goal contents and goal characteristics are different between medical and business students. Curriculum and educational interventions that concerning students’ goal and developing programs to enhance students’ social value of goal is necessary. PMID:26838564

Determining medical staffing requirements for humanitarian assistance missions.

PubMed

Negus, Tracy L; Brown, Carrie J; Konoske, Paula

2010-01-01

The primary mission of hospital ships is to provide acute medical and surgical services to U.S. forces during military operations. Hospital ships also provide a hospital asset in support of disaster relief and humanitarian assistance (HA) operations. HA missions afford medical care to populations with vastly different sets of medical conditions from combat casualty care, which affects staffing requirements. Information from a variety of sources was reviewed to better understand hospital ship HA missions. Factors such as time on-site and location shape the mission and underlying goals. Patient encounter data from previous HA missions were used to determine expected patient conditions encountered in various HA operations. These data points were used to project the medical staffing required for future missions. Further data collection, along with goal setting, must be performed to accomplish successful future HA missions. Refining staffing requirements allows deployments to accomplish needed HA and effectively reach underserved areas.

A Legal Perspective on Business: Modeling the Impact of Law

NASA Astrophysics Data System (ADS)

Ghanavati, Sepideh; Siena, Alberto; Perini, Anna; Amyot, Daniel; Peyton, Liam; Susi, Angelo

Modern goal-oriented requirements engineering frameworks use modeling as a means of better understanding a domain, leading to an overall improvement in the quality of the requirements. Regulations and laws impose additional context and constraints on software goals and can limit the satisfaction of stakeholder needs. Organizations and software developers need modeling tools that can properly address the potential deep impact legal issues can have on the effectiveness of business strategies. In this paper, we perform a preliminary study into the development of a modeling framework able to support the analysis of legal prescriptions alongside business strategies. We demonstrate, via an example drawn from a case study of the Health Insurance Portability and Accountability Act (HIPAA), how models of this law can be built with the GRL modeling language and how they can be evaluated as part of the business goal models.

48 CFR 52.222-23 - Notice of Requirement for Affirmative Action To Ensure Equal Employment Opportunity for...

Code of Federal Regulations, 2011 CFR

2011-10-01

... aggregate workforce in each trade on all construction work in the covered area, are as follows: Goals for... all the Contractor's construction work performed in the covered area. If the Contractor performs construction work in a geographical area located outside of the covered area, the Contractor shall apply the...

48 CFR 52.222-23 - Notice of Requirement for Affirmative Action To Ensure Equal Employment Opportunity for...

Code of Federal Regulations, 2010 CFR

2010-10-01

... aggregate workforce in each trade on all construction work in the covered area, are as follows: Goals for... all the Contractor's construction work performed in the covered area. If the Contractor performs construction work in a geographical area located outside of the covered area, the Contractor shall apply the...

Implementing the No Child Left Behind Act: Challenges for the States

ERIC Educational Resources Information Center

Goertz, Margaret E.

2005-01-01

The No Child Left Behind Act of 2001 (NCLB) requires states to test specified subjects and grades, to establish minimum performance standards for students, schools and school districts, and to provide assistance and impose sanctions on schools and districts that do not meet performance goals as a condition of receiving federal aid. NCLB builds on…

Energy Independence and Security Act of 2007: A Summary of Major Provisions

DTIC Science & Technology

2007-12-21

Service,The Library of Congress,101 Independence Ave, SW,Washington,DC,20540-7500 8. PERFORMING ORGANIZATION REPORT NUMBER 9. SPONSORING/ MONITORING ...establishes a zero -energy commercial buildings initiative. A national goal is set to achieve zero -net-energy use CRS-8 for new commercial buildings built...after 2025. A further goal is to retrofit all pre- 2025 buildings to zero -net-energy use by 2050. Section 423 requires that DOE establish a national

Measurements for liquid rocket engine performance code verification

NASA Technical Reports Server (NTRS)

Praharaj, Sarat C.; Palko, Richard L.

1986-01-01

The goal of the rocket engine performance code verification tests is to obtain the I sub sp with an accuracy of 0.25% or less. This needs to be done during the sequence of four related tests (two reactive and two hot gas simulation) to best utilize the loss separation technique recommended in this study. In addition to I sub sp, the measurements of the input and output parameters for the codes are needed. This study has shown two things in regard to obtaining the I sub sp uncertainty within the 0.25% target. First, this target is generally not being realized at the present time, and second, the instrumentation and testing technology does exist to obtain this 0.25% uncertainty goal. However, to achieve this goal will require carefully planned, designed, and conducted testing. In addition, the test-stand (or system) dynamics must be evaluated in the pre-test and post-test phases of the design of the experiment and data analysis, respectively always keeping in mind that a .25% overall uncertainty in I sub sp is targeted. A table gives the maximum allowable uncertainty required for obtaining I sub sp with 0.25% uncertainty, the currently-quoted instrument specification, and present test uncertainty for the parameters. In general, it appears that measurement of the mass flow parameter within the required uncertainty may be the most difficult.

Adult neurology training during child neurology residency.

PubMed

Schor, Nina F

2012-08-21

As it is currently configured, completion of child neurology residency requires performance of 12 months of training in adult neurology. Exploration of whether or not this duration of training in adult neurology is appropriate for what child neurology is today must take into account the initial reasons for this requirement and the goals of adult neurology training during child neurology residency.

NASA Performance Plan

NASA Technical Reports Server (NTRS)

1999-01-01

The Government Performance and Results Act (GPRA) passed by Congress and signed by the President in 1993 provides a new tool to improve the efficiency of all Federal agencies. The goals of GPRA are to: Improve citizen confidence in Government performance; Improve Federal program management, effectiveness, and public accountability; and Improve congressional decisionmaking on where to commit the Nation's financial and human resources. The Act directs Executive Branch agencies to develop a customer-focused strategic plan that aligns activities with concrete missions and goals. The first plans were submitted in September 1998 as part of the Fiscal Year 1999 (FY99) budget process. These budget submissions were expected to support the goals expressed in the agency strategic plans. The Act also directs agencies to manage and measure results to justify congressional appropriations and authorizations. Six months after the completion of the fiscal year, agencies will report on the degree of success in achieving the goals and evaluation measures defined in the strategic and performance plans. The plans required by GPRA have been submitted to the Office of Management and Budget (OMB) and to Congress. Copies of NASA plans are available from the Office of Policy and Plans at NASA Headquarters and can be accessed on the i nterinet web sites identified in the Appendix.

How can we tackle energy efficiency in IoT based smart buildings?

PubMed

Moreno, M Victoria; Úbeda, Benito; Skarmeta, Antonio F; Zamora, Miguel A

2014-05-30

Nowadays, buildings are increasingly expected to meet higher and more complex performance requirements. Among these requirements, energy efficiency is recognized as an international goal to promote energy sustainability of the planet. Different approaches have been adopted to address this goal, the most recent relating consumption patterns with human occupancy. In this work, we analyze what are the main parameters that should be considered to be included in any building energy management. The goal of this analysis is to help designers to select the most relevant parameters to control the energy consumption of buildings according to their context, selecting them as input data of the management system. Following this approach, we select three reference smart buildings with different contexts, and where our automation platform for energy monitoring is deployed. We carry out some experiments in these buildings to demonstrate the influence of the parameters identified as relevant in the energy consumption of the buildings. Then, in two of these buildings are applied different control strategies to save electrical energy. We describe the experiments performed and analyze the results. The first stages of this evaluation have already resulted in energy savings of about 23% in a real scenario.

How can We Tackle Energy Efficiency in IoT Based Smart Buildings?

PubMed Central

Moreno, M. Victoria; Úbeda, Benito; Skarmeta, Antonio F.; Zamora, Miguel A.

2014-01-01

Nowadays, buildings are increasingly expected to meet higher and more complex performance requirements. Among these requirements, energy efficiency is recognized as an international goal to promote energy sustainability of the planet. Different approaches have been adopted to address this goal, the most recent relating consumption patterns with human occupancy. In this work, we analyze what are the main parameters that should be considered to be included in any building energy management. The goal of this analysis is to help designers to select the most relevant parameters to control the energy consumption of buildings according to their context, selecting them as input data of the management system. Following this approach, we select three reference smart buildings with different contexts, and where our automation platform for energy monitoring is deployed. We carry out some experiments in these buildings to demonstrate the influence of the parameters identified as relevant in the energy consumption of the buildings. Then, in two of these buildings are applied different control strategies to save electrical energy. We describe the experiments performed and analyze the results. The first stages of this evaluation have already resulted in energy savings of about 23% in a real scenario. PMID:24887040

Specific features of goal setting in road traffic safety

NASA Astrophysics Data System (ADS)

Kolesov, V. I.; Danilov, O. F.; Petrov, A. I.

2017-10-01

Road traffic safety (RTS) management is inherently a branch of cybernetics and therefore requires clear formalization of the task. The paper aims at identification of the specific features of goal setting in RTS management under the system approach. The paper presents the results of cybernetic modeling of the cause-to-effect mechanism of a road traffic accident (RTA); in here, the mechanism itself is viewed as a complex system. A designed management goal function is focused on minimizing the difficulty in achieving the target goal. Optimization of the target goal has been performed using the Lagrange principle. The created working algorithms have passed the soft testing. The key role of the obtained solution in the tactical and strategic RTS management is considered. The dynamics of the management effectiveness indicator has been analyzed based on the ten-year statistics for Russia.

NASA HPCC Technology for Aerospace Analysis and Design

NASA Technical Reports Server (NTRS)

Schulbach, Catherine H.

1999-01-01

The Computational Aerosciences (CAS) Project is part of NASA's High Performance Computing and Communications Program. Its primary goal is to accelerate the availability of high-performance computing technology to the US aerospace community-thus providing the US aerospace community with key tools necessary to reduce design cycle times and increase fidelity in order to improve safety, efficiency and capability of future aerospace vehicles. A complementary goal is to hasten the emergence of a viable commercial market within the aerospace community for the advantage of the domestic computer hardware and software industry. The CAS Project selects representative aerospace problems (especially design) and uses them to focus efforts on advancing aerospace algorithms and applications, systems software, and computing machinery to demonstrate vast improvements in system performance and capability over the life of the program. Recent demonstrations have served to assess the benefits of possible performance improvements while reducing the risk of adopting high-performance computing technology. This talk will discuss past accomplishments in providing technology to the aerospace community, present efforts, and future goals. For example, the times to do full combustor and compressor simulations (of aircraft engines) have been reduced by factors of 320:1 and 400:1 respectively. While this has enabled new capabilities in engine simulation, the goal of an overnight, dynamic, multi-disciplinary, 3-dimensional simulation of an aircraft engine is still years away and will require new generations of high-end technology.

Development and demonstration of an on-board mission planner for helicopters

NASA Technical Reports Server (NTRS)

Deutsch, Owen L.; Desai, Mukund

1988-01-01

Mission management tasks can be distributed within a planning hierarchy, where each level of the hierarchy addresses a scope of action, and associated time scale or planning horizon, and requirements for plan generation response time. The current work is focused on the far-field planning subproblem, with a scope and planning horizon encompassing the entire mission and with a response time required to be about two minutes. The far-feld planning problem is posed as a constrained optimization problem and algorithms and structural organizations are proposed for the solution. Algorithms are implemented in a developmental environment, and performance is assessed with respect to optimality and feasibility for the intended application and in comparison with alternative algorithms. This is done for the three major components of far-field planning: goal planning, waypoint path planning, and timeline management. It appears feasible to meet performance requirements on a 10 Mips flyable processor (dedicated to far-field planning) using a heuristically-guided simulated annealing technique for the goal planner, a modified A* search for the waypoint path planner, and a speed scheduling technique developed for this project.

Goals Analysis Procedure Guidelines for Applying the Goals Analysis Process

NASA Technical Reports Server (NTRS)

Motley, Albert E., III

2000-01-01

One of the key elements to successful project management is the establishment of the "right set of requirements", requirements that reflect the true customer needs and are consistent with the strategic goals and objectives of the participating organizations. A viable set of requirements implies that each individual requirement is a necessary element in satisfying the stated goals and that the entire set of requirements, taken as a whole, is sufficient to satisfy the stated goals. Unfortunately, it is the author's experience that during project formulation phases' many of the Systems Engineering customers do not conduct a rigorous analysis of the goals and objectives that drive the system requirements. As a result, the Systems Engineer is often provided with requirements that are vague, incomplete, and internally inconsistent. To complicate matters, most systems development methodologies assume that the customer provides unambiguous, comprehensive and concise requirements. This paper describes the specific steps of a Goals Analysis process applied by Systems Engineers at the NASA Langley Research Center during the formulation of requirements for research projects. The objective of Goals Analysis is to identify and explore all of the influencing factors that ultimately drive the system's requirements.

A goal programming approach for a joint design of macroeconomic and environmental policies: a methodological proposal and an application to the Spanish economy.

PubMed

André, Francisco J; Cardenete, M Alejandro; Romero, Carlos

2009-05-01

The economic policy needs to pay increasingly more attention to the environmental issues, which requires the development of methodologies able to incorporate environmental, as well as macroeconomic, goals in the design of public policies. Starting from this observation, this article proposes a methodology based upon a Simonian satisficing logic made operational with the help of goal programming (GP) models, to address the joint design of macroeconomic and environmental policies. The methodology is applied to the Spanish economy, where a joint policy is elicited, taking into consideration macroeconomic goals (economic growth, inflation, unemployment, public deficit) and environmental goals (CO(2), NO( x ) and SO( x ) emissions) within the context of a computable general equilibrium model. The results show how the government can "fine-tune" its policy according to different criteria using GP models. The resulting policies aggregate the environmental and the economic goals in different ways: maximum aggregate performance, maximum balance and a lexicographic hierarchy of the goals.

Analytical screening of low emissions, high performance duct burners for supersonic cruise aircraft engines

NASA Technical Reports Server (NTRS)

Lohmann, R. A.; Riecke, G. T.

1977-01-01

An analytical screening study was conducted to identify duct burner concepts capable of providing low emissions and high performance in advanced supersonic engines. Duct burner configurations ranging from current augmenter technology to advanced concepts such as premix-prevaporized burners were defined. Aerothermal and mechanical design studies provided the basis for screening these configurations using the criteria of emissions, performance, engine compatibility, cost, weight and relative risk. Technology levels derived from recently defined experimental low emissions main burners are required to achieve both low emissions and high performance goals. A configuration based on the Vorbix (Vortex burning and mixing) combustor concept was analytically determined to meet the performance goals and is consistent with the fan duct envelope of a variable cycle engine. The duct burner configuration has a moderate risk level compatible with the schedule of anticipated experimental programs.

Operational Energy Strategy: Implementation Plan

DTIC Science & Technology

2012-03-01

U.S. forces to obtain the energy required to perform their missions. To achieve this goal, the Department will identify and remediate energy-related...construction projects related to hydropower and biogas to build local capacity in Afghanistan. Responsibilities. The Joint Staff and Military

Performance based selection of RAP-RAS in asphalt mixtures.

DOT National Transportation Integrated Search

2015-12-01

Asphalt pavement technology has been driven by a desire to reduce the consumption of virgin oil : products and improve the sustainability of vital ingredients required to produce pavement. The goal of : the research study described in this report is ...

Window acoustic study for advanced turboprop aircraft

NASA Technical Reports Server (NTRS)

Prydz, R. A.; Balena, F. J.

1984-01-01

An acoustic analysis was performed to establish window designs for advanced turboprop powered aircraft. The window transmission loss requirements were based on A-weighted interior noise goals of 80 and 75 dBA. The analytical results showed that a triple pane window consisting of two glass outer panes and an inner pane of acrylic would provide the required transmission loss and meet the sidewall space limits. Two window test articles were fabricated for laboratory evaluation and verification of the predicted transmission loss. Procedures for performing laboratory tests are presented.

NASA human factors programmatic overview

NASA Technical Reports Server (NTRS)

Connors, Mary M.

1992-01-01

Human factors addresses humans in their active and interactive capacities, i.e., in the mental and physical activities that they perform and in the contributions they make to achieving the goals of the mission. The overall goal of space human factors in NASA is to support the safety, productivity, and reliability of both the on-board crew and the ground support staff. Safety and reliability are fundamental requirements that human factors shares with other disciplines, while productivity represents the defining contribution of the human factors discipline.

75 FR 52358 - Notice of Submission of Proposed Information Collection to OMB; Doctoral Dissertation Research...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-25

...The proposed information collection requirement described below has been submitted to the Office of Management and Budget (OMB) for review, as required by the Paperwork Reduction Act. The Department is soliciting public comments on the subject proposal. The information is being collected to select applicants for award in this statutorily created competitive grant program and to monitor performance of grantees to ensure they meet statutory and program goals and requirements.

75 FR 52358 - Notice of Submission of Proposed Information Collection to OMB Historically Black Colleges and...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-25

...The proposed information collection requirement described below has been submitted to the Office of Management and Budget (OMB) for review, as required by the Paperwork Reduction Act. The Department is soliciting public comments on the subject proposal. The information is being collected to select applicants for award in this statutorily created competitive grant program and to monitor performance of grantees to ensure they meet statutory and program goals and requirements.

The Aeronautical Data Link: Decision Framework for Architecture Analysis

NASA Technical Reports Server (NTRS)

Morris, A. Terry; Goode, Plesent W.

2003-01-01

A decision analytic approach that develops optimal data link architecture configuration and behavior to meet multiple conflicting objectives of concurrent and different airspace operations functions has previously been developed. The approach, premised on a formal taxonomic classification that correlates data link performance with operations requirements, information requirements, and implementing technologies, provides a coherent methodology for data link architectural analysis from top-down and bottom-up perspectives. This paper follows the previous research by providing more specific approaches for mapping and transitioning between the lower levels of the decision framework. The goal of the architectural analysis methodology is to assess the impact of specific architecture configurations and behaviors on the efficiency, capacity, and safety of operations. This necessarily involves understanding the various capabilities, system level performance issues and performance and interface concepts related to the conceptual purpose of the architecture and to the underlying data link technologies. Efficient and goal-directed data link architectural network configuration is conditioned on quantifying the risks and uncertainties associated with complex structural interface decisions. Deterministic and stochastic optimal design approaches will be discussed that maximize the effectiveness of architectural designs.

New Icing Cloud Simulation System at the NASA Glenn Research Center Icing Research Tunnel

NASA Technical Reports Server (NTRS)

Irvine, Thomas B.; Oldenburg, John R.; Sheldon, David W.

1999-01-01

A new spray bar system was designed, fabricated, and installed in the NASA Glenn Research Center's Icing Research Tunnel (IRT). This system is key to the IRT's ability to do aircraft in-flight icing cloud simulation. The performance goals and requirements levied on the design of the new spray bar system included increased size of the uniform icing cloud in the IRT test section, faster system response time, and increased coverage of icing conditions as defined in Appendix C of the Federal Aviation Regulation (FAR), Part 25 and Part 29. Through significant changes to the mechanical and electrical designs of the previous-generation spray bar system, the performance goals and requirements were realized. Postinstallation aerodynamic and icing cloud calibrations were performed to quantify the changes and improvements made to the IRT test section flow quality and icing cloud characteristics. The new and improved capability to simulate aircraft encounters with in-flight icing clouds ensures that the 1RT will continue to provide a satisfactory icing ground-test simulation method to the aeronautics community.

Mathematical Model for a Simplified Calculation of the Input Momentum Coefficient for AFC Purposes

NASA Astrophysics Data System (ADS)

Hirsch, Damian; Gharib, Morteza

2016-11-01

Active Flow Control (AFC) is an emerging technology which aims at enhancing the aerodynamic performance of flight vehicles (i.e., to save fuel). A viable AFC system must consider the limited resources available on a plane for attaining performance goals. A higher performance goal (i.e., airplane incremental lift) demands a higher input fluidic requirement (i.e., mass flow rate). Therefore, the key requirement for a successful and practical design is to minimize power input while maximizing performance to achieve design targets. One of the most used design parameters is the input momentum coefficient Cμ. The difficulty associated with Cμ lies in obtaining the parameters for its calculation. In the literature two main approaches can be found, which both have their own disadvantages (assumptions, difficult measurements). A new, much simpler calculation approach will be presented that is based on a mathematical model that can be applied to most jet designs (i.e., steady or sweeping jets). The model-incorporated assumptions will be justified theoretically as well as experimentally. Furthermore, the model's capabilities are exploited to give new insight to the AFC technology and its physical limitations. Supported by Boeing.

System design of the Pioneer Venus spacecraft. Volume 10: Propulsion/orbit insertion subsystem studies

NASA Technical Reports Server (NTRS)

Rosenstein, B. J.

1973-01-01

The Pioneer Venus orbiter and multiprobe missions require spacecraft maneuvers for successful accomplishment. This report presents the results of studies performed to define the propulsion subsystems required to perform those maneuvers. Primary goals were to define low mass subsystems capable of performing the required missions with a high degree of reliability for low cost. A review was performed of all applicable propellants and thruster types, as well as propellant management techniques. Based on this review, a liquid monopropellant hydrazine propulsion subsystem was selected for all multiprobe mission maneuvers, and for all orbiter mission maneuvers except orbit insertion. A pressure blowdown operating mode was selected using helium as the pressurizing gas. The forces associated with spacecraft rotations were used to control the liquid-gas interface and resulting propellant orientation within the tank.

Predicting race performance in triathlon: the role of perfectionism, achievement goals, and personal goal setting.

PubMed

Stoeber, Joachim; Uphill, Mark A; Hotham, Sarah

2009-04-01

The question of how perfectionism affects performance is highly debated. Because empirical studies examining perfectionism and competitive sport performance are missing, the present research investigated how perfectionism affected race performance and what role athletes' goals played in this relationship in two prospective studies with competitive triathletes (Study 1: N = 112; Study 2: N = 321). Regression analyses showed that perfectionistic personal standards, high performance-approach goals, low performance-avoidance goals, and high personal goals predicted race performance beyond athletes' performance level. Moreover, the contrast between performance-avoidance and performance-approach goals mediated the relationship between perfectionistic personal standards and performance, whereas personal goal setting mediated the relationship between performance-approach goals and performance. The findings indicate that perfectionistic personal standards do not undermine competitive performance, but are associated with goals that help athletes achieve their best possible performance.

Academic Self-Handicapping and Achievement Goals: A Further Examination.

PubMed

Midgley, Carol; Urdan, Tim

2001-01-01

This study extends previous research on the relations among students' personal achievement goals, perceptions of the classroom goal structure, and reports of the use of self-handicapping strategies. Surveys, specific to the math domain, were given to 484 7th-grade students in nine middle schools. Personal performance-avoid goals positively predicted handicapping, whereas personal performance-approach goals did not. Personal task goals negatively predicted handicapping. Perceptions of a performance goal structure positively predicted handicapping, and perceptions of a task goal structure negatively predicted handicapping, independent of personal goals. Median splits used to examine multiple goal profiles revealed that students high in performance-avoid goals used handicapping more than did those low in performance-avoid goals regardless of the level of task goals. Students low in performance-avoid goals and high in task goals handicapped less than those low in both goals. Level of performance-approach goals had little effect on the relation between task goals and handicapping. Copyright 2001 Academic Press.

The Case for Unit-Based Teams: A Model for Front-line Engagement and Performance Improvement

PubMed Central

Cohen, Paul M; Ptaskiewicz, Mark; Mipos, Debra

2010-01-01

Unit-based teams (UBTs)—defined as natural work groups of physicians, managers, and frontline staff who work collaboratively to solve problems, improve performance, and enhance quality—were established by the 2005 national agreement between Kaiser Permanente (KP) and the Coalition of KP Unions. They use established performance-improvement techniques and employee-engagement principles (including social-movement theory) to achieve clinical and operational goals. UBT members identify performance gaps and opportunities within their purview—issues they can address in the course of the day-to-day work, such as workflow or process improvement. By focusing on clear, agreed-on goals, UBTs encourage greater accountability and allow members to perform their full scope of work. UBTs are designed to deliver measurable benefits in clinical outcomes and operations, patient-experience enhancements, and physician-team performance or work life. For many physicians, UBTs will require new ways of engaging with their teams. However, evidence suggests that with organizational and physician support, these teams can achieve their goals. This article presents case examples of successful UBTs' outcomes; physicians' comments on their experience working with teams; an overview of UBTs' employee-engagement principles; and advice on how physicians can support and participate in the work of such teams. PMID:20740124

Photovoltaic module encapsulation design and materials selection, volume 1

NASA Technical Reports Server (NTRS)

Cuddihy, E.; Carroll, W.; Coulbert, C.; Gupta, A.; Liang, R. H.

1982-01-01

Encapsulation material system requirements, material selection criteria, and the status and properties of encapsulation materials and processes available are presented. Technical and economic goals established for photovoltaic modules and encapsulation systems and their status are described. Available encapsulation technology and data are presented to facilitate design and material selection for silicon flat plate photovoltaic modules, using the best materials available and processes optimized for specific power applications and geographic sites. The operational and environmental loads that encapsulation system functional requirements and candidate design concepts and materials that are identified to have the best potential to meet the cost and performance goals for the flat plate solar array project are described. Available data on encapsulant material properties, fabrication processing, and module life and durability characteristics are presented.

Space station needs, attributes, and architectural options: Brief analysis

NASA Technical Reports Server (NTRS)

Shepphird, F. H.

1983-01-01

A baseline set of model missions is thoroughly characterized in terms of support requirements, demands on the Space Station, operating regimes, payload properties, and statements of the mission goals and objectives. This baseline is a representative set of mission requirements covering the most likely extent of space station support requirements from which architectural options can be constructed and exercised. The baseline set of 90 missions are assessed collectively and individually in terms of the economic, performance, and social benefits.

Artificial Intelligence Applications to High-Technology Training.

ERIC Educational Resources Information Center

Dede, Christopher

1987-01-01

Discusses the use of artificial intelligence to improve occupational instruction in complex subjects with high performance goals, such as those required for high-technology jobs. Highlights include intelligent computer assisted instruction, examples in space technology training, intelligent simulation environments, and the need for adult training…

Kinematic functions for redundancy resolution using configuration control

NASA Technical Reports Server (NTRS)

Seraji, Homayoun (Inventor)

1994-01-01

The invention fulfills new goals for redundancy resolution based on manipulator dynamics and end-effector characteristics. These goals are accomplished by employing the recently developed configuration control approach. Redundancy resolution is achieved by controlling the joint inertia matrix of the end-effector mass matrix that affect the inertial torques or by reducing the joint torques due to gravity loading and payload. The manipulator mechanical-advantage and velocity-ratio are also used as performance measures to be improved by proper utilization of redundancy. Furthermore, end-effector compliance, sensitivity, and impulsive force at impact are introduced as redundancy resolution criteria. The new goals for redundancy resolution allow a more efficient utilization of the redundant joints based on the desired task requirements.

Policy Perspective: Meeting the Challenge of the DOE Order 436.1 Departmental Sustainability - 12527

DOE Office of Scientific and Technical Information (OSTI.GOV)

MacDonald, Jennifer C.

2012-07-01

DOE's Sustainability Performance Office is working to meet sustainability goals at DOE by implementing Executive Orders, Departmental policy, the DOE Strategic Sustainability Performance Plan (SSPP) and legislation related to sustainability. Through implementation of Executive Orders, Departmental policy, the SSPP, statutory requirements and regular reporting, analysis and communication, DOE's SPO is working to maintain and expand DOE's leadership in sustainability. (authors)

Trichotomous goals of elementary school students learning English as a foreign language: a structural equation model.

PubMed

He, Tung-Hsien; Chang, Shan-Mao; Chen, Shu-Hui Eileen; Gou, Wen Johnny

2012-02-01

This study applied structural equation modeling (SEM) techniques to define the relations among trichotomous goals (mastery goals, performance-approach goals, and performance-avoidance goals), self-efficacy, use of metacognitive self-regulation strategies, positive belief in seeking help, and help-avoidance behavior. Elementary school students (N = 105), who were learning English as a foreign language, were surveyed using five self-report scales. The structural equation model showed that self-efficacy led to the adoption of mastery goals but discouraged the adoption of performance-approach goals and performance-avoidance goals. Furthermore, mastery goals increased the use of metacognitive self-regulation strategies, whereas performance-approach goals and performance-avoidance goals reduced their use. Mastery goals encouraged positive belief in help-seeking, but performance-avoidance goals decreased such belief. Finally, performance-avoidance goals directly led to help-avoidance behavior, whereas positive belief assumed a critical role in reducing help-avoidance. The established structural equation model illuminated the potential causal relations among these variables for the young learners in this study.

Reduction of Total Ownership Cost

DTIC Science & Technology

2003-09-30

preparation of the Technology Development Strategy, which addresses technology risk for a new weapon system. If there is a misstep...requirements for a new system may be transfixed by the technical performance and may not clearly establish requirements for ownership cost to achieve...important to the PM than TOC goals that will not be realized until long after the PM has departed for a new assignment or retired. If PMs and their

Fabrication of the Advanced X-ray Astrophysics Facility (AXAF) Optics: A Deterministic, Precision Engineering Approach to Optical Fabrication

NASA Technical Reports Server (NTRS)

Gordon, T. E.

1995-01-01

The mirror assembly of the AXAF observatory consists of four concentric, confocal, Wolter type 1 telescopes. Each telescope includes two conical grazing incidence mirrors, a paraboloid followed by a hyperboloid. Fabrication of these state-or-the-art optics is now complete, with predicted performance that surpasses the goals of the program. The fabrication of these optics, whose size and requirements exceed those of any previous x-ray mirrors, presented a challenging task requiring the use of precision engineering in many different forms. Virtually all of the equipment used for this effort required precision engineering. Accurate metrology required deterministic support of the mirrors in order to model the gravity distortions which will not be present on orbit. The primary axial instrument, known as the Precision Metrology Station (PMS), was a unique scanning Fizeau interferometer. After metrology was complete, the optics were placed in specially designed Glass Support Fixtures (GSF's) for installation on the Automated Cylindrical Grinder/Polishers (ACG/P's). The GSF's were custom molded for each mirror element to match the shape of the outer surface to minimize distortions of the inner surface. The final performance of the telescope is expected to far exceed the original goals and expectations of the program.

Innovation in organ transplantation: A meeting report.

PubMed

Fishman, Jay A; Greenwald, Melissa

2018-05-09

This workshop targeted opportunities to stimulate transformative innovation in organ transplantation. Participants reached consensus regarding the following: (1) Mechanisms are needed to improve the coordination of policy and oversight activities, given overlapping responsibilities for transplantation and clinical investigation among federal agencies. Innovative clinical trials span traditional administrative boundaries and include stakeholders with diverse interests. Participants identified the need for a governmental interagency working group to coordinate nationwide transplant-related activities. (2) Improvements are required in clinical metrics for transplantation, with alignment of performance goals across transplantation organizations and any development of data requirements being consistent with those goals. Database coordination among clinical centers, organ procurement organizations, regulatory agencies, and payers would facilitate research and better inform policy. New data requirements should provide actionable insights into clinical performance. (3) Innovative research seen as potentially adversely affecting Program-Specific Reports may reduce centers' participation. Cutting-edge research requires mitigation of risk-aversive behaviors created by reporting of clinical outcomes data. Participants proposed a new review process in advance of implementation of clinical trials to guide "carve-outs" of transplant center outcomes data from Program-Specific Reports. Clinical transplantation will be advanced by the development of a shared and comprehensive research agenda to facilitate coordination of research and policy. © 2018 The American Society of Transplantation and the American Society of Transplant Surgeons.

Improved Controls for Fusion RF Systems. Final technical report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Casey, Jeffrey A.

2011-11-08

We have addressed the specific requirements for the integrated systems controlling an array of klystrons used for Lower Hybrid Current Drive (LHCD). The immediate goal for our design was to modernize the transmitter protection system (TPS) for LHCD on the Alcator C-Mod tokamak at the MIT Plasma Science and Fusion Center (MIT-PSFC). Working with the Alcator C-Mod team, we have upgraded the design of these controls to retrofit for improvements in performance and safety, as well as to facilitate the upcoming expansion from 12 to 16 klystrons. The longer range goals to generalize the designs in such a way thatmore » they will be of benefit to other programs within the international fusion effort was met by designing a system which was flexible enough to address all the MIT system requirements, and modular enough to adapt to a large variety of other requirements with minimal reconfiguration.« less

TRL-6 for JWST wavefront sensing and control

NASA Astrophysics Data System (ADS)

Feinberg, Lee D.; Dean, Bruce H.; Aronstein, David L.; Bowers, Charles W.; Hayden, William; Lyon, Richard G.; Shiri, Ron; Smith, J. Scott; Acton, D. Scott; Carey, Larkin; Contos, Adam; Sabatke, Erin; Schwenker, John; Shields, Duncan; Towell, Tim; Shi, Fang; Meza, Luis

2007-09-01

NASA's Technology Readiness Level (TRL)-6 is documented for the James Webb Space Telescope (JWST) Wavefront Sensing and Control (WFSC) subsystem. The WFSC subsystem is needed to align the Optical Telescope Element (OTE) after all deployments have occurred, and achieves that requirement through a robust commissioning sequence consisting of unique commissioning algorithms, all of which are part of the WFSC algorithm suite. This paper identifies the technology need, algorithm heritage, describes the finished TRL-6 design platform, and summarizes the TRL-6 test results and compliance. Additionally, the performance requirements needed to satisfy JWST science goals as well as the criterion that relate to the TRL-6 Testbed Telescope (TBT) performance requirements are discussed.

TRL-6 for JWST Wavefront Sensing and Control

NASA Technical Reports Server (NTRS)

Feinberg, Lee; Dean, Bruce; Smith, Scott; Aronstein, David; Shiri, Ron; Lyon, Rick; Hayden, Bill; Bowers, Chuck; Acton, D. Scott; Shields, Duncan;

Low elevation angle propagation modelling considerations for the Intelsat Business Service

NASA Astrophysics Data System (ADS)

Allnutt, J. E.; Arbesser-Rastburg, B.

The performance and availability goals of the Intelsat Business System (IBS) Standard E (14/11 or 14/12 GHz) and Standard F (6/4 GHz) earth stations dictate a new approach to propagation impairment modelling in these bands. In view of potential causes for variations in the margin requirements, it is noted that propagation models are required which are able to predict not merely at the 1-percent, but even at the 5-percent point in the course of an average year. Diurnal 'event' data are accordingly required to furnish suitable design inputs for small IBS links. The critical impact of equipment variations and scintillation on the performance margins is shown.

Monetary reward magnitude effects on behavior and brain function during goal-directed behavior.

PubMed

Rosell-Negre, P; Bustamante, J C; Fuentes-Claramonte, P; Costumero, V; Benabarre, S; Barrós-Loscertales, A

2017-08-01

Reward may modulate the cognitive processes required for goal achievement, while individual differences in personality may affect reward modulation. Our aim was to test how different monetary reward magnitudes modulate brain activation and performance during goal-directed behavior, and whether individual differences in reward sensitivity affect this modulation. For this purpose, we scanned 37 subjects with a parametric design in which we varied the magnitude of monetary rewards (€0, €0.01, €0.5, €1 or €1.5) in a blocked fashion while participants performed an interference counting-Stroop condition. The results showed that the brain activity of left dorsolateral prefrontal cortex (DLPFC) and the striatum were modulated by increasing and decreasing reward magnitudes, respectively. Behavioral performance improved as the magnitude of monetary reward increased while comparing the non reward (€0) condition to any other reward condition, or the lower €0.01 to any other reward condition, and this improvement was related with individual differences in reward sensitivity. In conclusion, the locus of influence of monetary incentives overlaps the activity of the regions commonly involved in cognitive control.

Establishing a Research and Evaluation Capability for the Joint Medical Education and Training Campus.

PubMed

Kirby, Sheila Nataraj; Marsh, Julie A; Thie, Harry J

2011-01-01

In calling for the transformation of military medical education and training, the 2005 Base Realignment and Closure Commission recommended relocating basic and specialty enlisted medical training to a single site to take advantage of economies of scale and the opportunity for joint training. As a result, a joint medical education and training campus (METC) has been established at Fort Sam Houston, Texas. Two of METC's primary long-term goals are to become a high-performing learning organization and to seek accreditation as a community college. Such goals require a clear model of organizational improvement with well-defined metrics for measuring its performance and using research and evaluation to assess and improve that performance. Lessons learned from a review of practices at institutions with similar missions-such as community colleges, corporate universities, the UK's Defence Medical Education and Training Agency, and other federal agencies, such as the Veterans Health Administration-establish a clear need for an office of institutional research to help METC attain its organizational goals. They also provide useful recommendations regarding the METC office's structure, scope, and governance.

Establishing a Research and Evaluation Capability for the Joint Medical Education and Training Campus

PubMed Central

Kirby, Sheila Nataraj; Marsh, Julie A.; Thie, Harry J.

2011-01-01

Abstract In calling for the transformation of military medical education and training, the 2005 Base Realignment and Closure Commission recommended relocating basic and specialty enlisted medical training to a single site to take advantage of economies of scale and the opportunity for joint training. As a result, a joint medical education and training campus (METC) has been established at Fort Sam Houston, Texas. Two of METC's primary long-term goals are to become a high-performing learning organization and to seek accreditation as a community college. Such goals require a clear model of organizational improvement with well-defined metrics for measuring its performance and using research and evaluation to assess and improve that performance. Lessons learned from a review of practices at institutions with similar missions—such as community colleges, corporate universities, the UK's Defence Medical Education and Training Agency, and other federal agencies, such as the Veterans Health Administration—establish a clear need for an office of institutional research to help METC attain its organizational goals. They also provide useful recommendations regarding the METC office's structure, scope, and governance. PMID:28083182

Achieving Deeper Energy Savings in Federal Energy Performance Contracts

DOE PAGES

Shonder, John A.; Nasseri, Cyrus

2015-01-01

Legislation requires each agency of the US federal government to reduce the aggregate energy use index of its buildings by 30% by 2015, with respect to a 2003 baseline. The declining availability of appropriated funding means that energy performance contracting will be key to achieving this goal. Historically however, energy performance contracts have been able to reduce energy use by only about 20% over baseline. Achieving 30% energy reductions using performance contracting will require new approaches and a specific focus on achieving higher energy savings, both by ESCOs and by agencies. This paper describes some of the ways federal agenciesmore » are meeting this challenge, and presents results from the efforts of one agency the US General Services Administration -- to achieve deeper energy savings in conventional energy savings performance contracts.« less

Government and industry interactions in the development of clock technology

NASA Technical Reports Server (NTRS)

Hellwig, H.

1981-01-01

It appears likely that everyone in the time and frequency community can agree on goals to be realized through the expenditure of resources. These goals are the same as found in most fields of technology: lower cost, better performance, increased reliability, small size and lower power. Related aspects are examined in the process of clock and frequency standard development. Government and industry are reviewed in a highly interactive role. These interactions include judgements on clock performance, what kind of clock, expenditure of resources, transfer of ideas or hardware concepts from government to industry, and control of production. Successful clock development and production requires a government/industry relationship which is characterized by long-term continuity, multidisciplinary team work, focused funding and a separation of reliability and production oriented tasks from performance improvement/research type efforts.

International Space Station Configuration Analysis and Integration

NASA Technical Reports Server (NTRS)

Anchondo, Rebekah

2016-01-01

Ambitious engineering projects, such as NASA's International Space Station (ISS), require dependable modeling, analysis, visualization, and robotics to ensure that complex mission strategies are carried out cost effectively, sustainably, and safely. Learn how Booz Allen Hamilton's Modeling, Analysis, Visualization, and Robotics Integration Center (MAVRIC) team performs engineering analysis of the ISS Configuration based primarily on the use of 3D CAD models. To support mission planning and execution, the team tracks the configuration of ISS and maintains configuration requirements to ensure operational goals are met. The MAVRIC team performs multi-disciplinary integration and trade studies to ensure future configurations meet stakeholder needs.

Design and development of a multibeam 1.4 GHz pushbroom microwave radiometer

NASA Technical Reports Server (NTRS)

Lawrence, R. W.; Bailey, M. C.; Harrington, R. F.; Hearn, C. P.; Wells, J. G.; Stanley, W. D.

1986-01-01

The design and operation of a multiple beam, digital signal processing radiometer are discussed. The discussion includes a brief description of each major subsystem and an overall explanation of the hardware requirements and operation. A series of flight tests was conducted in which sea-truth sites, as well as an existing radiometer were used to verify the Pushbroom Radiometer performance. The results of these tests indicate that the Pushbroom Radiometer did meet the sensitivity design goal of 1.0 kelvin, and exceeded the accuracy requirement of 2.0 kelvin. Additional performance characteristics and test results are also presented.

From Goal-Oriented Requirements to Event-B Specifications

NASA Technical Reports Server (NTRS)

Aziz, Benjamin; Arenas, Alvaro E.; Bicarregui, Juan; Ponsard, Christophe; Massonet, Philippe

2009-01-01

In goal-oriented requirements engineering methodologies, goals are structured into refinement trees from high-level system-wide goals down to fine-grained requirements assigned to specific software/ hardware/human agents that can realise them. Functional goals assigned to software agents need to be operationalised into specification of services that the agent should provide to realise those requirements. In this paper, we propose an approach for operationalising requirements into specifications expressed in the Event-B formalism. Our approach has the benefit of aiding software designers by bridging the gap between declarative requirements and operational system specifications in a rigorous manner, enabling powerful correctness proofs and allowing further refinements down to the implementation level. Our solution is based on verifying that a consistent Event-B machine exhibits properties corresponding to requirements.

Planning for Competency-Based Teacher Education at the State Level.

ERIC Educational Resources Information Center

Roth, Robert A.

There are eight areas which require attention in planning for state implementation of performance-based teacher education (PBTE): (a) initiation action, (b) goal statement formulation, (c) state role identification, (d) certification pattern design, (e) delivery system structure, (f) support mechanism organization, (g) regulation changes…

75 FR 39008 - Proposed Agency Information Collection

Federal Register 2010, 2011, 2012, 2013, 2014

2010-07-07

... ADDRESSES as soon as possible. ADDRESSES: Written comments may be sent to Jeffery Dowd, Solar Decathlon... goals as required by the Government Performance and Results Act (GPRA), and the Office of Management and... Assistant Secretary-Business Administration (DAS-BA), Office of Energy Efficiency and Renewable Energy. [FR...

75 FR 47583 - Proposed Agency Information Collection

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-06

... as soon as possible. The Desk Officer may be telephoned at 202-395-4650. ADDRESSES: Written comments... Program; and for measuring attainment of DOE's program goals as required by the Government Performance and... respondents are homeowners and former college students as described in the SUMMARY; (5) Annual Estimated...

7 CFR 1709.117 - Application requirements.

Code of Federal Regulations, 2010 CFR

2010-01-01

... project including target community, goals, tasks to be completed and other relevant information that... to support a finding of technical feasibility; (ii) Identify the major tasks to be performed and a proposed timeline for completion of each task; and (iii) Identify the location of the project target area...

Personnel Management: Stewardship of Human Resources

ERIC Educational Resources Information Center

MacLean, Douglas G.

1976-01-01

The personnel function of top management is examined by first studying the environment in which top management functions. The basic skills required to perform the function are discussed. Against this background, six elements of personnel management in colleges and universities are considered: goals and objectives, organization for personnel…

Adapted all-numerical correlator for face recognition applications

NASA Astrophysics Data System (ADS)

Elbouz, M.; Bouzidi, F.; Alfalou, A.; Brosseau, C.; Leonard, I.; Benkelfat, B.-E.

2013-03-01

In this study, we suggest and validate an all-numerical implementation of a VanderLugt correlator which is optimized for face recognition applications. The main goal of this implementation is to take advantage of the benefits (detection, localization, and identification of a target object within a scene) of correlation methods and exploit the reconfigurability of numerical approaches. This technique requires a numerical implementation of the optical Fourier transform. We pay special attention to adapt the correlation filter to this numerical implementation. One main goal of this work is to reduce the size of the filter in order to decrease the memory space required for real time applications. To fulfil this requirement, we code the reference images with 8 bits and study the effect of this coding on the performances of several composite filters (phase-only filter, binary phase-only filter). The saturation effect has for effect to decrease the performances of the correlator for making a decision when filters contain up to nine references. Further, an optimization is proposed based for an optimized segmented composite filter. Based on this approach, we present tests with different faces demonstrating that the above mentioned saturation effect is significantly reduced while minimizing the size of the learning data base.

Developing physician pay arrangements: the cash and care equation.

PubMed

Levitch, J H

1998-11-01

Developing physician compensation packages that help a healthcare organization meet its business objectives while satisfying physician pay expectations requires new ways of linking pay to physician performance. Such compensation arrangements specifically should include pay tied to defined performance standards, compensation linked to group performance, performance incentives based on realistic, achievable goals, work performance measured by common criteria, and similar pay ensured for similar work. Final pay arrangements also should include items that are sometimes overlooked, such as fully delineated job responsibilities, performance measures aligned correctly with performance areas, and the value of benefits considered in the cash compensation levels.

Internal motion in high vacuum systems

NASA Astrophysics Data System (ADS)

Frank, J. M.

Three transfer and positioning mechanisms have been developed for the non-air exposed, multistep processing of components in vacuum chambers. The functions to be performed in all of the systems include ultraviolet/ozone cleaning, vacuum baking, deposition of thin films, and thermocompression sealing of the enclosures. Precise positioning of the components is required during the evaporation and sealing processes. The three methods of transporting and positioning the components were developed to accommodate the design criteria and goals of each individual system. The design philosophy, goals, and operation of the three mechanisms are discussed.

Common modular avionics - Partitioning and design philosophy

NASA Astrophysics Data System (ADS)

Scott, D. M.; Mulvaney, S. P.

The design objectives and definition criteria for common modular hardware that will perform digital processing functions in multiple avionic subsystems are examined. In particular, attention is given to weapon system-level objectives, such as increased supportability, reduced life cycle costs, and increased upgradability. These objectives dictate the following overall modular design goals: reduce test equipment requirements; have a large number of subsystem applications; design for architectural growth; and standardize for technology transparent implementations. Finally, specific partitioning criteria are derived on the basis of the weapon system-level objectives and overall design goals.

Examination of the Perceived Efficacy and Goal Setting System (PEGS) with children with disabilities, their parents, and teachers.

PubMed

Missiuna, Cheryl; Pollock, Nancy; Law, Mary; Walter, Stephen; Cavey, Nina

2006-01-01

The Perceived Efficacy and Goal Setting System (PEGS) is an instrument and a process that enables children with disabilities to reflect on their ability to perform everyday occupations and to identify goals for occupational therapy intervention. In this study, 117 children with disabilities in grades 1-3 completed the PEGS with occupational therapists who work in school settings. Children from 6-9 years of age with a variety of disabilities were able to self-report perceptions of their effectiveness performing 24 activities that would be expected of them each day. Parents and teachers, who completed a parallel questionnaire, rated their abilities lower than the children did. The School Function Assessment, a measure of the amount and type of support required for school participation, had low correlations with the Parent and Teacher PEGS questionnaires and did not correlate with the Child PEGS. No differences in perceived efficacy were found for children across grades or gender; however, differences were found across types of disabilities. Children were able to use the perceived efficacy information to identify and prioritize goals for intervention and these goals remained stable 2 weeks later. Occupational therapists can use the PEGS within a client-centered practice to help the child set goals for therapy and to incorporate explicitly the perspectives of parents and teachers.

Optimizing spacecraft design - optimization engine development : progress and plans

NASA Technical Reports Server (NTRS)

Cornford, Steven L.; Feather, Martin S.; Dunphy, Julia R; Salcedo, Jose; Menzies, Tim

2003-01-01

At JPL and NASA, a process has been developed to perform life cycle risk management. This process requires users to identify: goals and objectives to be achieved (and their relative priorities), the various risks to achieving those goals and objectives, and options for risk mitigation (prevention, detection ahead of time, and alleviation). Risks are broadly defined to include the risk of failing to design a system with adequate performance, compatibility and robustness in addition to more traditional implementation and operational risks. The options for mitigating these different kinds of risks can include architectural and design choices, technology plans and technology back-up options, test-bed and simulation options, engineering models and hardware/software development techniques and other more traditional risk reduction techniques.

Developing Software Requirements Supporting Open Architecture Performance Goals in Critical DoD System-of-Systems

DTIC Science & Technology

2006-09-15

POSTGRADUATE SCHOOL GRADUATE SCHOOL OF BUSINESS AND PUBLIC POLICY 555 DYER ROAD MONTEREY, CA 93943-5103 8. PERFORMING ORGANIZATION REPORT NUMBER NPS...Chair, Graduate School of Business & Public Policy, Naval Postgraduate School supported the funding of the research presented herein. Reproduction of...all or part of this report is authorized. The report was prepared by: ________________________________ Brad Naegle, Senior Lecturer Graduate School

Differentiating Performance Approach Goals and Their Unique Effects

ERIC Educational Resources Information Center

Edwards, Ordene V.

2014-01-01

The study differentiates between two types of performance approach goals (competence demonstration performance approach goal and normative performance approach goal) by examining their unique effects on self-efficacy, interest, and fear of failure. Seventy-nine students completed questionnaires that measure performance approach goals,…

Fission Power System Technology for NASA Exploration Missions

NASA Technical Reports Server (NTRS)

Mason, Lee; Houts, Michael

2011-01-01

Under the NASA Exploration Technology Development Program, and in partnership with the Department of Energy (DOE), NASA is conducting a project to mature Fission Power System (FPS) technology. A primary project goal is to develop viable system options to support future NASA mission needs for nuclear power. The main FPS project objectives are as follows: 1) Develop FPS concepts that meet expected NASA mission power requirements at reasonable cost with added benefits over other options. 2) Establish a hardware-based technical foundation for FPS design concepts and reduce overall development risk. 3) Reduce the cost uncertainties for FPS and establish greater credibility for flight system cost estimates. 4) Generate the key products to allow NASA decisionmakers to consider FPS as a preferred option for flight development. In order to achieve these goals, the FPS project has two main thrusts: concept definition and risk reduction. Under concept definition, NASA and DOE are performing trade studies, defining requirements, developing analytical tools, and formulating system concepts. A typical FPS consists of the reactor, shield, power conversion, heat rejection, and power management and distribution (PMAD). Studies are performed to identify the desired design parameters for each subsystem that allow the system to meet the requirements with reasonable cost and development risk. Risk reduction provides the means to evaluate technologies in a laboratory test environment. Non-nuclear hardware prototypes are built and tested to verify performance expectations, gain operating experience, and resolve design uncertainties.

Propulsion Technology Needs for Exploration

NASA Technical Reports Server (NTRS)

Brown, Thomas

2007-01-01

The objectives of currently planned exploration efforts, as well as those further in the future, require significant advancements in propulsion technologies. The current Lunar exploration architecture has set goals and mission objectives that necessitate the use of new systems and the extension of existing technologies beyond present applications. In the near term, the majority of these technologies are the result of a need to apply high performing cryogenic propulsion systems to long duration in-space applications. Advancement of cryogenic propulsion to these applications is crucial to provide higher performing propulsion systems that reduce the vehicle masses; enhance the safety of vehicle systems and ground operations; and provide a path for In-situ Resource Utilization (ISRU).Use of a LOX/LH2 main propulsion system for Lunar Lander Descent is a top priority because more conventional storable propellants are far from meeting the performance needs of the current architecture. While LOX/LH2 pump feed engines have been used in flight applications for many years, these engines have limited throttle capabilities. Engines that are capable of much greater throttling while still meeting high performance goals are a necessity to achieving exploration goals. Applications of LOX/CH4 propulsion to Lander ascent propulsion systems and reaction control systems are also if interest because of desirable performance and operations improvements over conventional storable systems while being more suitable for use of in-situ produced propellants. Within the current lunar architecture, use of cryogenic propulsion for the Earth Departure Stage and Lunar Lander elements also necessitate the need for advanced Cryogenic Fluid Management technologies. These technologies include long duration propellant storage/distribution, low-gravity propellant management, cryogenic couplings and disconnects, light weight composite tanks and support structure, and subsystem integration. In addition to the propulsive and fluid management system technologies described, many component level technologies are also required to enable to the success if the integrated systems. The components include, but are not limited to, variable/throttling valves, variable position actuators, leak detectors, light weight cryogenic fluid pumps, sensor technology and others. NASA, partnering with the Aerospace Industry must endeavor to develop these, and other promising propulsion technologies, to enable the implements of the country's goals in exploration of the Moon, Mars and beyond.

The Terrestrial Planet Finder coronagraph dynamics error budget

NASA Technical Reports Server (NTRS)

Shaklan, Stuart B.; Marchen, Luis; Green, Joseph J.; Lay, Oliver P.

2005-01-01

The Terrestrial Planet Finder Coronagraph (TPF-C) demands extreme wave front control and stability to achieve its goal of detecting earth-like planets around nearby stars. We describe the performance models and error budget used to evaluate image plane contrast and derive engineering requirements for this challenging optical system.

Encapsulation Processing and Manufacturing Yield Analysis

NASA Technical Reports Server (NTRS)

Willis, P. B.

1984-01-01

The development of encapsulation processing and a manufacturing productivity analysis for photovoltaic cells are discussed. The goals were: (1) to understand the relationships between both formulation variables and process variables; (2) to define conditions required for optimum performance; (3) to predict manufacturing yield; and (4) to provide documentation to industry.

12 CFR 1281.13 - Special counting requirements.

Code of Federal Regulations, 2011 CFR

2011-01-01

... were previously counted by a Bank under any current or previous housing goal within the five years immediately preceding the current performance year; (10) Purchases of mortgages where the property has not been approved for occupancy; and (11) Any combination of factors in paragraphs (b)(1) through (b)(10...

The Promise and the Performance: What's Really Basic in Teaching TAs.

ERIC Educational Resources Information Center

Bloom, Lynn Z.

In order to promote professionalism and transform novice teaching assistants into capable instructors, the University of New Mexico has established a required course in "Teaching Composition." The course attempts to define institutional and departmental goals, and explore such issues in class management as organization, discipline,…

Lernen Wir Deutsch! Part 10, German: 7535.02.

ERIC Educational Resources Information Center

Dade County Public Schools, Miami, FL.

This course in German prescribes broad goals and performance objectives for the development of cultural awareness, student attitudes, and listening, speaking, writing, and reading skills. The content of the course, based on Units 21 and 22 of "A-LM German: Level 2" and "Reading for Meaning," requires mastery of selected…

Trouble in Paradise

ERIC Educational Resources Information Center

Dessoff, Alan

2010-01-01

Like other districts with schools that are not meeting adequate yearly progress (AYP) goals for five consecutive years, Hawaii is restructuring its low performing schools as required by the No Child Left Behind (NCLB) law. Unlike most other districts, however, Hawaii, a single statewide district, has been doing it for five years with the support…

How to Determine the Least Restrictive Environment for Students with Disabilities

ERIC Educational Resources Information Center

Rozalski, Michael; Stewart, Angie; Miller, Jason

2010-01-01

The Individuals with Disabilities Education Act (IDEA) requires that students with disabilities be educated with peers without disabilities "to the maximum extent appropriate." When the individualized education program (IEP) team is reviewing the student's current performance, establishing the student's goals, and determining the services that the…

Encapsulation processing and manufacturing yield analysis

NASA Astrophysics Data System (ADS)

Willis, P. B.

1984-10-01

The development of encapsulation processing and a manufacturing productivity analysis for photovoltaic cells are discussed. The goals were: (1) to understand the relationships between both formulation variables and process variables; (2) to define conditions required for optimum performance; (3) to predict manufacturing yield; and (4) to provide documentation to industry.

Reliability of Multi-Category Rating Scales

ERIC Educational Resources Information Center

Parker, Richard I.; Vannest, Kimberly J.; Davis, John L.

2013-01-01

The use of multi-category scales is increasing for the monitoring of IEP goals, classroom and school rules, and Behavior Improvement Plans (BIPs). Although they require greater inference than traditional data counting, little is known about the inter-rater reliability of these scales. This simulation study examined the performance of nine…

Large Deployable Reflector (LDR) feasibility study update

NASA Technical Reports Server (NTRS)

Alff, W. H.; Banderman, L. W.

1983-01-01

In 1982 a workshop was held to refine the science rationale for large deployable reflectors (LDR) and develop technology requirements that support the science rationale. At the end of the workshop, a set of LDR consensus systems requirements was established. The subject study was undertaken to update the initial LDR study using the new systems requirements. The study included mirror materials selection and configuration, thermal analysis, structural concept definition and analysis, dynamic control analysis and recommendations for further study. The primary emphasis was on the dynamic controls requirements and the sophistication of the controls system needed to meet LDR performance goals.

Mastering social and organization goals: strategy use by two children with Asperger syndrome during cognitive orientation to daily occupational performance.

PubMed

Rodger, Sylvia; Vishram, Alysha

2010-11-01

Preliminary data supports the effectiveness of Cognitive Orientation to (daily) Occupational Performance (CO-OP) for children with Asperger syndrome (AS). Children with AS often experience social and organizational difficulties spanning daily occupations. This case study explored the pattern of Global Strategies and Domain-Specific Strategies (DSS) use, the type of guidance, and dimensions of time on task used by two children with AS (aged 10 and 12 years) in addressing social and organizational goals during the CO-OP intervention. Coding of the videotaped CO-OP sessions suggested that both children (a) utilized all the Global strategies, particularly "understanding the context” and "plan"; (b) used six common DSS, namely transitional supports, affective supports, attending, task-specification, task modification, and supplementing task knowledge, with task-specification being most prominent; (c) required minimal guidance while "doing"; and (d) engaged in considerable time "talking about the task.” The results provide initial insights into strategies that may enable children with AS to achieve social and organizational goals.

User's manual for rocket combustor interactive design (ROCCID) and analysis computer program. Volume 1: User's manual

NASA Technical Reports Server (NTRS)

Muss, J. A.; Nguyen, T. V.; Johnson, C. W.

1991-01-01

The user's manual for the rocket combustor interactive design (ROCCID) computer program is presented. The program, written in Fortran 77, provides a standardized methodology using state of the art codes and procedures for the analysis of a liquid rocket engine combustor's steady state combustion performance and combustion stability. The ROCCID is currently capable of analyzing mixed element injector patterns containing impinging like doublet or unlike triplet, showerhead, shear coaxial, and swirl coaxial elements as long as only one element type exists in each injector core, baffle, or barrier zone. Real propellant properties of oxygen, hydrogen, methane, propane, and RP-1 are included in ROCCID. The properties of other propellants can easily be added. The analysis model in ROCCID can account for the influence of acoustic cavities, helmholtz resonators, and radial thrust chamber baffles on combustion stability. ROCCID also contains the logic to interactively create a combustor design which meets input performance and stability goals. A preliminary design results from the application of historical correlations to the input design requirements. The steady state performance and combustion stability of this design is evaluated using the analysis models, and ROCCID guides the user as to the design changes required to satisfy the user's performance and stability goals, including the design of stability aids. Output from ROCCID includes a formatted input file for the standardized JANNAF engine performance prediction procedure.

Community engagement: outcomes for occupational therapy students, faculty and clients.

PubMed

Schindler, Victoria P

2014-06-01

Students in health care professions, including occupational therapy, are required to develop knowledge, skills and attitudes in mental health and research. Persons diagnosed with a mental illness, a learning disability or an autism-spectrum disorder desire to achieve goals in higher education and employment. Faculty in health care programmes strives to meet professional goals and accreditation and institution requirements for teaching, service and scholarship. The Bridge Program, a programme based on principles of community engagement, was developed to meet the needs of these three stakeholders. The objective of this paper is to provide programme description and outcomes of the effectiveness of the Bridge Program for all three stakeholders. This uses mixed methods research design including descriptive and quantitative and qualitative one-group pre-test-post-test designs. Instruments consisted of the Occupational Therapy Student and Mental Health Population Scale and the Canadian Occupational Performance Measure. Quantitative results support that graduate occupational therapy students gained research and clinical skills (n = 100; p = .000); clients increased performance and satisfaction toward goals (n = 113; p = .000) and faculty (n = 1) achieved goals related to teaching, service and scholarship. Programmes based on principles of community engagement can address the needs of the community, can provide outcomes that advance knowledge about community practice and can result in benefits for all stakeholders. This paper is limited to generalization and instrumentation and recommends an ongoing evaluation of other community engagement programmes involving all stakeholders in the future research. Copyright © 2014 John Wiley & Sons, Ltd.

Determining robot actions for tasks requiring sensor interaction

NASA Technical Reports Server (NTRS)

Budenske, John; Gini, Maria

1989-01-01

The performance of non-trivial tasks by a mobile robot has been a long term objective of robotic research. One of the major stumbling blocks to this goal is the conversion of the high-level planning goals and commands into the actuator and sensor processing controls. In order for a mobile robot to accomplish a non-trivial task, the task must be described in terms of primitive actions of the robot's actuators. Most non-trivial tasks require the robot to interact with its environment; thus necessitating coordination of sensor processing and actuator control to accomplish the task. The main contention is that the transformation from the high level description of the task to the primitive actions should be performed primarily at execution time, when knowledge about the environment can be obtained through sensors. It is proposed to produce the detailed plan of primitive actions by using a collection of low-level planning components that contain domain specific knowledge and knowledge about the available sensors, actuators, and sensor/actuator processing. This collection will perform signal and control processing as well as serve as a control interface between an actual mobile robot and a high-level planning system. Previous research has shown the usefulness of high-level planning systems to plan the coordination of activities such to achieve a goal, but none have been fully applied to actual mobile robots due to the complexity of interacting with sensors and actuators. This control interface is currently being implemented on a LABMATE mobile robot connected to a SUN workstation and will be developed such to enable the LABMATE to perform non-trivial, sensor-intensive tasks as specified by a planning system.

Capability and Technology Performance Goals for the Next Step in Affordable Human Exploration of Space

NASA Technical Reports Server (NTRS)

Linne, Diane L.; Sanders, Gerald B.; Taminger, Karen M.

2015-01-01

The capability for living off the land, commonly called in-situ resource utilization, is finally gaining traction in space exploration architectures. Production of oxygen from the Martian atmosphere is called an enabling technology for human return from Mars, and a flight demonstration to be flown on the Mars 2020 robotic lander is in development. However, many of the individual components still require technical improvements, and system-level trades will be required to identify the best combination of technology options. Based largely on work performed for two recent roadmap activities, this paper defines the capability and technology requirements that will need to be achieved before this game-changing capability can reach its full potential.

Carving Executive Control At Its Joints: Working Memory Capacity Predicts Stimulus-Stimulus, But Not Stimulus-Response, Conflict

PubMed Central

Meier, Matt E.; Kane, Michael J.

2015-01-01

Three experiments examined the relation between working memory capacity (WMC) and two different forms of cognitive conflict: stimulus-stimulus (S-S) and stimulus-response (SR) interference. Our goal was to test whether WMC’s relation to conflict-task performance is mediated by stimulus-identification processes (captured by S-S conflict), response-selection processes (captured by S-R conflict), or both. In Experiment 1, subjects completed a single task presenting both S-S and S-R conflict trials, plus trials that combined the two conflict types. We limited ostensible goal-maintenance contributions to performance by requiring the same goal for all trial types and by presenting frequent conflict trials that reinforced the goal. WMC predicted resolution of S-S conflict as expected: Higher-WMC subjects showed reduced response time interference. Although WMC also predicted S-R interference, here, higher-WMC subjects showed increased error interference. Experiment 2A replicated these results in a version of the conflict task without combined S-S/S-R trials. Experiment 2B increased the proportion of congruent (non-conflict) trials to promote reliance on goal-maintenance processes. Here, higher-WMC subjects resolved both S-S and S-R conflict more successfully than did lower-WMC subjects. The results were consistent with Kane and Engle’s (2003) two-factor theory of cognitive control, according to which WMC predicts executive-task performance through goal-maintenance and conflict-resolution processes. However, the present results add specificity to the account by suggesting that higher-WMC subjects better resolve cognitive conflict because they more efficiently select relevant stimulus features against irrelevant, distracting ones. PMID:26120774

Carving executive control at its joints: Working memory capacity predicts stimulus-stimulus, but not stimulus-response, conflict.

PubMed

Meier, Matt E; Kane, Michael J

2015-11-01

Three experiments examined the relation between working memory capacity (WMC) and 2 different forms of cognitive conflict: stimulus-stimulus (S-S) and stimulus-response (S-R) interference. Our goal was to test whether WMC's relation to conflict-task performance is mediated by stimulus-identification processes (captured by S-S conflict), response-selection processes (captured by S-R conflict), or both. In Experiment 1, subjects completed a single task presenting both S-S and S-R conflict trials, plus trials that combined the 2 conflict types. We limited ostensible goal-maintenance contributions to performance by requiring the same goal for all trial types and by presenting frequent conflict trials that reinforced the goal. WMC predicted resolution of S-S conflict as expected: Higher WMC subjects showed reduced response time interference. Although WMC also predicted S-R interference, here, higher WMC subjects showed increased error interference. Experiment 2A replicated these results in a version of the conflict task without combined S-S/S-R trials. Experiment 2B increased the proportion of congruent (nonconflict) trials to promote reliance on goal-maintenance processes. Here, higher WMC subjects resolved both S-S and S-R conflict more successfully than did lower WMC subjects. The results were consistent with Kane and Engle's (2003) 2-factor theory of cognitive control, according to which WMC predicts executive-task performance through goal-maintenance and conflict-resolution processes. However, the present results add specificity to the account by suggesting that higher WMC subjects better resolve cognitive conflict because they more efficiently select relevant stimulus features against irrelevant, distracting ones. (c) 2015 APA, all rights reserved).

Thulium heat source IR D Project 91-031

DOE Office of Scientific and Technical Information (OSTI.GOV)

Walter, C.E.; Kammeraad, J.E.; Newman, J.G.

1991-01-01

The goal of the Thulium Heat Source study is to determine the performance capability and evaluate the safety and environmental aspects of a thulium-170 heat source. Thulium-170 has several attractive features, including the fact that it decays to a stable, chemically innocuous isotope in a relatively short time. A longer-range goal is to attract government funding for the development, fabrication, and demonstration testing in an Autonomous Underwater Vehicle (AUV) of one or more thulium isotope power (TIP) prototype systems. The approach is to study parametrically the performance of thulium-170 heat source designs in the power range of 5-50 kW{sub th}.more » At least three heat source designs will be characterized in this power range to assess their performance, mass, and volume. The authors will determine shielding requirements, and consider the safety and environmental aspects of their use.« less

First-order error budgeting for LUVOIR mission

NASA Astrophysics Data System (ADS)

Lightsey, Paul A.; Knight, J. Scott; Feinberg, Lee D.; Bolcar, Matthew R.; Shaklan, Stuart B.

2017-09-01

Future large astronomical telescopes in space will have architectures that will have complex and demanding requirements to meet the science goals. The Large UV/Optical/IR Surveyor (LUVOIR) mission concept being assessed by the NASA/Goddard Space Flight Center is expected to be 9 to 15 meters in diameter, have a segmented primary mirror and be diffraction limited at a wavelength of 500 nanometers. The optical stability is expected to be in the picometer range for minutes to hours. Architecture studies to support the NASA Science and Technology Definition teams (STDTs) are underway to evaluate systems performance improvements to meet the science goals. To help define the technology needs and assess performance, a first order error budget has been developed. Like the JWST error budget, the error budget includes the active, adaptive and passive elements in spatial and temporal domains. JWST performance is scaled using first order approximations where appropriate and includes technical advances in telescope control.

Self-regulation: from goal orientation to job performance.

PubMed

Porath, Christine L; Bateman, Thomas S

2006-01-01

The authors investigated the effects on job performance of 3 forms of goal orientation and 4 self-regulation (SR) tactics. In a longitudinal field study with salespeople, learning and performance-prove goal orientation predicted subsequent sales performance, whereas performance-avoid goal orientation negatively predicted sales performance. The SR tactics functioned as mediating variables between learning and performance-prove goal orientations and performance. Social competence and proactive behavior directly and positively predicted sales performance, and emotional control negatively predicted performance. (c) 2006 APA, all rights reserved.

Philosophies Applied in the Selection of Space Suit Joint Range of Motion Requirements

NASA Technical Reports Server (NTRS)

Aitchison, Lindsway; Ross, Amy; Matty, Jennifer

2009-01-01

Space suits are the most important tool for astronauts working in harsh space and planetary environments; suits keep crewmembers alive and allow them to perform exploration, construction, and scientific tasks on a routine basis over a period of several months. The efficiency with which the tasks are performed is largely dictated by the mobility features of the space suit. For previous space suit development programs, the mobility requirements were written as pure functional mobility requirements that did not separate joint ranges of motion from the joint torques. The Constellation Space Suit Element has the goal to make more quantitative mobility requirements that focused on the individual components of mobility to enable future suit designers to build and test systems more effectively. This paper details the test planning and selection process for the Constellation space suit pressure garment range of motion requirements.

Goal directed enoxaparin dosing provides superior chemoprophylaxis against deep vein thrombosis.

PubMed

Kopelman, Tammy R; Walters, Jarvis W; Bogert, James N; Basharat, Usmaan; Pieri, Paola G; Davis, Karole M; Quan, Asia N; Vail, Sydney J; Pressman, Melissa A

2017-05-01

Optimal enoxaparin dosing for deep venous thrombosis (DVT) prophylaxis remains elusive. Prior research demonstrated that trauma patients at increased risk for DVT based upon Greenfield's risk assessment profile (RAP) have DVT rates of 10.8% despite prophylaxis. The aim of this study was to determine if goal directed prophylactic enoxaparin dosing to achieve anti-Xa levels of 0.3-0.5IU/ml would decrease DVT rates without increased complications. Retrospective review of trauma patients having received prophylactic enoxaparin and appropriately timed anti-Xa levels was performed. Dosage was adjusted to maintain an anti-Xa level of 0.3-0.5IU/ml. RAP was determined on each patient. A score of ≥5 was considered high risk for DVT. Sub-analysis was performed on patients who received duplex examinations subsequent to initiation of enoxaparin therapy to determine the incidence of DVT. 306 patients met inclusion criteria. Goal anti-Xa levels were met initially in only 46% of patients despite dosing of >40mg twice daily in 81% of patients; however, with titration, goal anti-Xa levels were achieved in an additional 109 patients (36%). An average enoxaparin dosage of 0.55mg/kg twice daily was required for adequacy. Bleeding complications were identified in five patients (1.6%) with three requiring intervention. There were no documented episodes of HIT. Subsequent duplex data was available in 197 patients with 90% having a RAP score >5. Overall, five DVTs (2.5%) were identified and all occurred in the high-risk group. All patients were asymptomatic at the time of diagnosis. An increased anti-Xa range of 0.3-0.5IU/ml was attainable but frequently required titration of enoxaparin dosage. This produced a lower rate of DVT than previously published without increased complications. Copyright © 2016 Elsevier Ltd. All rights reserved.

Rats with hippocampal lesion show impaired learning and memory in the ziggurat task: a new task to evaluate spatial behavior.

PubMed

Faraji, Jamshid; Lehmann, Hugo; Metz, Gerlinde A; Sutherland, Robert J

2008-05-16

Spatial tasks are widely used to determine the function of limbic system structures in rats. The present study used a new task designed to evaluate spatial behavior, the ziggurat task (ZT), to examine the performance of rats with widespread hippocampal damage induced by N-methyl-d-aspartic acid (NMDA). The task consisted of an open field containing 16 identical ziggurats (pyramid shaped towers) arranged at equal distances. One of the ziggurats was baited with a food reward. The task required rats to navigate through the open field by using a combination of distal and/or proximal cues in order to locate the food reward. The ability to acquire and recall the location of the goal (baited) ziggurat was tested in consecutive training sessions of eight trials per day for 10 days. The location of the goal ziggurat was changed every second day, requiring the rats to learn a total of five different locations. Several parameters, including latency to find the target, distance traveled, the number of visits to non-baited ziggurats (errors), and the number of returns were used as indices of learning and memory. Control rats showed a significant decrease in distance traveled and reduced latency in locating the goal ziggurat across trials and days, suggesting that they learned and remembered the location of the goal ziggurat. Interestingly, the hippocampal-damaged group moved significantly faster, and traveled longer distances compared to the control group. Significant differences were observed between these groups with respect to the number of errors and returns on test days. Day 11 served as probe day, in which no food reward was given. The controls spent more time searching for the food in the previous training quadrant compared to the hippocampal group. The findings demonstrate that the ZT is a sensitive and efficient dry task for measuring hippocampus-dependent spatial performance in rats requiring little training and not associated with some of the disadvantages of water tasks.

The challenge of developing structural materials for fusion power systems

NASA Astrophysics Data System (ADS)

Bloom, Everett E.

1998-10-01

Nuclear fusion can be one of the most attractive sources of energy from the viewpoint of safety and minimal environmental impact. Central in the goal of designing a safe, environmentally benign, and economically competitive fusion power system is the requirement for high performance, low activation materials. The general performance requirements for such materials have been defined and it is clear that materials developed for other applications (e.g. aerospace, nuclear fission, fossil energy systems) will not fully meet the needs of fusion. Advanced materials, with composition and microstructure tailored to yield properties that will satisfy the specific requirements of fusion must be developed. The international fusion programs have made significant progress towards this goal. Compositional requirements for low activation lead to a focus of development efforts on silicon carbide composites, vanadium alloys, and advanced martensitic steels as candidate structural material systems. Control of impurities will be critically important in actually achieving low activation but this appears possible. Neutron irradiation produces significant changes in the mechanical and physical properties of each of these material systems raising feasibility questions and design limitations. A focus of the research and development effort is to understand these effects, and through the development of specific compositions and microstructures, produce materials with improved and adequate performance. Other areas of research that are synergistic with the development of radiation resistant materials include fabrication, joining technology, chemical compatibility with coolants and tritium breeders and specific questions relating to the unique characteristics of a given material (e.g. coatings to reduce gas permeation in SiC composites) or design concept (e.g. electrical insulator coatings for liquid metal concepts).

Developing Software Requirements Supporting Open Architecture Performance Goals in Critical DoD System-of-Systems

DTIC Science & Technology

2005-11-15

Postgraduate School,Graduate School of Business and Public Policy,555 Dyer Road, Room 332,Monterey,CA,93943 8. PERFORMING ORGANIZATION REPORT NUMBER 9...research presented in this report was supported by the Acquisition Chair of the Graduate School of Business & Public Policy at the Naval Postgraduate...2003." BPP Research Colloquium. 25 November 2003. Copies of the Acquisition Sponsored Research Reports may be printed from our website

Creating objective and measurable postgraduate year 1 residency graduation requirements.

PubMed

Starosta, Kaitlin; Davis, Susan L; Kenney, Rachel M; Peters, Michael; To, Long; Kalus, James S

2017-03-15

The process of developing objective and measurable postgraduate year 1 (PGY1) residency graduation requirements and a progress tracking system is described. The PGY1 residency accreditation standard requires that programs establish criteria that must be met by residents for successful completion of the program (i.e., graduation requirements), which should presumably be aligned with helping residents to achieve the purpose of residency training. In addition, programs must track a resident's progress toward fulfillment of residency goals and objectives. Defining graduation requirements and establishing the process for tracking residents' progress are left up to the discretion of the residency program. To help standardize resident performance assessments, leaders of an academic medical center-based PGY1 residency program developed graduation requirement criteria that are objective, measurable, and linked back to residency goals and objectives. A system for tracking resident progress relative to quarterly progress targets was instituted. Leaders also developed a focused, on-the-spot skills assessment termed "the Thunderdome," which was designed for objective evaluation of direct patient care skills. Quarterly data on residents' progress are used to update and customize each resident's training plan. Implementation of this system allowed seamless linkage of the training plan, the progress tracking system, and the specified graduation requirement criteria. PGY1 residency requirements that are objective, that are measurable, and that attempt to identify what skills the resident must demonstrate in order to graduate from the program were developed for use in our residency program. A system for tracking the residents' progress by comparing residents' performance to predetermined quarterly benchmarks was developed. Copyright © 2017 by the American Society of Health-System Pharmacists, Inc. All rights reserved.

Improving insight and non-insight problem solving with brief interventions.

PubMed

Wen, Ming-Ching; Butler, Laurie T; Koutstaal, Wilma

2013-02-01

Developing brief training interventions that benefit different forms of problem solving is challenging. In earlier research, Chrysikou (2006) showed that engaging in a task requiring generation of alternative uses of common objects improved subsequent insight problem solving. These benefits were attributed to a form of implicit transfer of processing involving enhanced construction of impromptu, on-the-spot or 'ad hoc' goal-directed categorizations of the problem elements. Following this, it is predicted that the alternative uses exercise should benefit abilities that govern goal-directed behaviour, such as fluid intelligence and executive functions. Similarly, an indirect intervention - self-affirmation (SA) - that has been shown to enhance cognitive and executive performance after self-regulation challenge and when under stereotype threat, may also increase adaptive goal-directed thinking and likewise should bolster problem-solving performance. In Experiment 1, brief single-session interventions, involving either alternative uses generation or SA, significantly enhanced both subsequent insight and visual-spatial fluid reasoning problem solving. In Experiment 2, we replicated the finding of benefits of both alternative uses generation and SA on subsequent insight problem-solving performance, and demonstrated that the underlying mechanism likely involves improved executive functioning. Even brief cognitive- and social-psychological interventions may substantially bolster different types of problem solving and may exert largely similar facilitatory effects on goal-directed behaviours. © 2012 The British Psychological Society.

Test Hardware Design for Flightlike Operation of Advanced Stirling Convertors (ASC-E3)

NASA Technical Reports Server (NTRS)

Oriti, Salvatore M.

2012-01-01

NASA Glenn Research Center (GRC) has been supporting development of the Advanced Stirling Radioisotope Generator (ASRG) since 2006. A key element of the ASRG project is providing life, reliability, and performance testing of the Advanced Stirling Convertor (ASC). For this purpose, the Thermal Energy Conversion branch at GRC has been conducting extended operation of a multitude of free-piston Stirling convertors. The goal of this effort is to generate long-term performance data (tens of thousands of hours) simultaneously on multiple units to build a life and reliability database. The test hardware for operation of these convertors was designed to permit in-air investigative testing, such as performance mapping over a range of environmental conditions. With this, there was no requirement to accurately emulate the flight hardware. For the upcoming ASC-E3 units, the decision has been made to assemble the convertors into a flight-like configuration. This means the convertors will be arranged in the dual-opposed configuration in a housing that represents the fit, form, and thermal function of the ASRG. The goal of this effort is to enable system level tests that could not be performed with the traditional test hardware at GRC. This offers the opportunity to perform these system-level tests much earlier in the ASRG flight development, as they would normally not be performed until fabrication of the qualification unit. This paper discusses the requirements, process, and results of this flight-like hardware design activity.

Test Hardware Design for Flight-Like Operation of Advanced Stirling Convertors

NASA Technical Reports Server (NTRS)

Oriti, Salvatore M.

2012-01-01

NASA Glenn Research Center (GRC) has been supporting development of the Advanced Stirling Radioisotope Generator (ASRG) since 2006. A key element of the ASRG project is providing life, reliability, and performance testing of the Advanced Stirling Convertor (ASC). For this purpose, the Thermal Energy Conversion branch at GRC has been conducting extended operation of a multitude of free-piston Stirling convertors. The goal of this effort is to generate long-term performance data (tens of thousands of hours) simultaneously on multiple units to build a life and reliability database. The test hardware for operation of these convertors was designed to permit in-air investigative testing, such as performance mapping over a range of environmental conditions. With this, there was no requirement to accurately emulate the flight hardware. For the upcoming ASC-E3 units, the decision has been made to assemble the convertors into a flight-like configuration. This means the convertors will be arranged in the dual-opposed configuration in a housing that represents the fit, form, and thermal function of the ASRG. The goal of this effort is to enable system level tests that could not be performed with the traditional test hardware at GRC. This offers the opportunity to perform these system-level tests much earlier in the ASRG flight development, as they would normally not be performed until fabrication of the qualification unit. This paper discusses the requirements, process, and results of this flight-like hardware design activity.

Goal orientation and self-efficacy in relation to memory in adulthood

PubMed Central

Hastings, Erin C.; West, Robin L.

2011-01-01

The achievement goal framework (Dweck, 1986) has been well-established in children and college-students, but has rarely been examined empirically with older adults. The current study, including younger and older adults, examined the effects of memory self-efficacy, learning goals (focusing on skill mastery over time) and performance goals (focusing on performance outcome evaluations) on memory performance. Questionnaires measured memory self-efficacy and general orientation toward learning and performance goals; free and cued recall was assessed in a subsequent telephone interview. As expected, age was negatively related and education was positively related to memory self-efficacy, and memory self-efficacy was positively related to memory, in a structural equation model. Age was also negatively related to memory performance. Results supported the positive impact of learning goals and the negative impact of performance goals on memory self-efficacy. There was no significant direct effect of learning or performance goals on memory performance; their impact occurred via their effect on memory self-efficacy. The present study supports past research suggesting that learning goals are beneficial, and performance goals are maladaptive, for self-efficacy and learning, and validates the achievement goal framework in a sample including older adults. PMID:21728891

Design, fabrication and test of the RL10 derivative II chamber/primary nozzle

NASA Technical Reports Server (NTRS)

Marable, R. W.

1989-01-01

The design, fabrication and test of the RL10-II chamber/primary nozzle was accomplished as part of the RL10 Product Improvement Program (PIP). The overall goal of the RL10 PIP was to gain the knowledge and experience necessary to develop new cryogenic upper stage engines to fulfill future NASA requirements. The goal would be reached by producing an RL10 engine designed to be reusable, operate at several thrust levels, and have increased performance. The goals for the chamber/primary nozzle task were: (1) to design a reusable assembly capable of operation at increased mixture ratio and low thrust; (2) to fabricate three assemblies using new or updated techniques where possible; and (3) to test one assembly to verify the design and construction. The design and fabrication phases produced an assembly having improved features such as single piece reinforcing band segments (i.e., Mae West segments) and relocated tube exit braze joints (i.e., hooked tube exit). In addition, a computer program was developed to design the chamber tubes to meet both performance and heat transfer requirements. The test phase showed the specific impulse of the test bed engine system to be as predicted. These results, along with the heat transfer data obtained, sufficiently proved the overall design of the RL10-II recontoured and shortened chamber/primary nozzle assembly.

The managed care contract: the blueprint for monitoring agreements.

PubMed

Hummel, J R; Cooper, S J

2001-06-01

Healthcare providers generally undertake monitoring programs of managed care arrangements as a way of analyzing financial performance, uncovering lapses in contractually mandated performance that might expose the organization to financial loss, and gathering information that can be helpful in renegotiating the contract or negotiating new arrangements. To secure access to the information needed to achieve these goals, the provider should ensure that the contract spells out the information required, the health plan's obligations to supply this information, and the consequences of the plan's failure to meet those obligations. Such consequences may include financial penalties for the plan and special termination rights for the provider. Without a contractually explicit assurance that the needed information will be available, a provider may find itself with no way to achieve its contract-monitoring goals.

Identifying achievement goals and their relationship to academic achievement in undergraduate pharmacy students.

PubMed

Alrakaf, Saleh; Sainsbury, Erica; Rose, Grenville; Smith, Lorraine

2014-09-15

To compare the achievement goal orientations of first-year with those of third-year undergraduate Australian pharmacy students and to examine the relationship of goal orientations to academic achievement. The Achievement Goal Questionnaire was administered to first-year and third-year students during class time. Students' grades were obtained from course coordinators. More first-year students adopted performance-approach and mastery-approach goals than did third-year students. Performance-approach goals were positively correlated with academic achievement in the first year. Chinese Australian students scored the highest in adopting performance-approach goals. Vietnamese Australian students adopted mastery-avoidance goals more than other ethnicities. First-year students were more strongly performance approach goal-oriented than third-year students. Adopting performance-approach goals was positively correlated with academic achievement, while adopting avoidance goals was not. Ethnicity has an effect on the adoption of achievement goals and academic achievement.

Quality Assurance in Software Development: An Exploratory Investigation in Software Project Failures and Business Performance

ERIC Educational Resources Information Center

Ichu, Emmanuel A.

2010-01-01

Software quality is perhaps one of the most sought-after attributes in product development, however; this goal is unattained. Problem factors in software development and how these have affected the maintainability of the delivered software systems requires a thorough investigation. It was, therefore, very important to understand software…

Employment and First-Year College Achievement: The Role of Self-Regulation and Motivation

ERIC Educational Resources Information Center

Huie, Faye C.; Winsler, Adam; Kitsantas, Anastasia

2014-01-01

Students often work in order to meet monetary requirements for college. However, employment reduces the time students can devote to their studies, which can hinder performance. This study examined whether motivation (self-efficacy goal orientation) and self-regulated learning (help-seeking, metacognitive self-regulation, time management and effort…

Exploration Medical Capability (ExMC) Program

NASA Technical Reports Server (NTRS)

Kalla, Elizabeth

2006-01-01

This document reviews NASA's Exploration Medical Capability (ExMC) program. The new space exploration program, outlined by the President will present new challenges to the crew's health. The project goals are to develop and validate requirements for reliable, efficient, and robust medical systems and treatments for space exploration to maximize crew performance for mission objectives.

The Motivational Effects of Participation Versus Goal Setting on Performance.

DTIC Science & Technology

1982-01-01

the premeasure. Upon completing the two circles the subjects was asked to reload the stapler to ensure that it would be full1 for the pretest and to...34, and immediately reload the stapler and con- tinue working. The experimenter would then automatically stop and restart the stopwatch as required so that

What Works with Worked Examples: Extending Self-Explanation and Analogical Comparison to Synthesis Problems

ERIC Educational Resources Information Center

Badeau, Ryan; White, Daniel R.; Ibrahim, Bashirah; Ding, Lin; Heckler, Andrew F.

2017-01-01

The ability to solve physics problems that require multiple concepts from across the physics curriculum--"synthesis" problems--is often a goal of physics instruction. Three experiments were designed to evaluate the effectiveness of two instructional methods employing worked examples on student performance with synthesis problems; these…

Achieving Excellence: Investing in People, Knowledge and Opportunity. Canada's Innovation Strategy.

ERIC Educational Resources Information Center

2002

To become one of the world's most innovative countries, Canada requires a national innovation strategy for the 21st century. It is progressing toward a more innovative economy, but lags behind many developed countries in terms of overall innovation performance. A national innovation strategy to meet Canada's innovation challenge proposes goals,…

77 FR 25143 - Announcement of Meeting on “Developing Standard Requirements for Fatigue Performance of...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-27

... meeting. SUMMARY: The National Institute of Standards and Technology (NIST) invites interested parties to..., [email protected]nist.gov . SUPPLEMENTARY INFORMATION: The goal of the consortium will include determining... planning and standard development would be conducted by NIST staff along with at least one technical...

Developing job-related preplacement medical examinations.

PubMed

Hogan, J C; Bernacki, E J

1981-07-01

Federal regulations prohibiting discrimination in hiring require that employment selection procedures to evaluate applicants be based on job-related criteria. The preplacement physical examination used in employment, particularly in the placement of handicapped persons, must also be conducted in a job-related manner. This paper discusses the development and use of the physical examination in selecting and placing applicants for jobs in the workplace with special reference to handicapped persons and disabled veterans. It presents and justifies a method of performing these examinations in a manner consistent with humanistic and business goals as well as the goals of federal regulatory agencies prohibiting employment discrimination.

Dynamic Model of the BIO-Plex Air Revitalization System

NASA Technical Reports Server (NTRS)

Finn, Cory; Meyers, Karen; Duffield, Bruce; Luna, Bernadette (Technical Monitor)

2000-01-01

The BIO-Plex facility will need to support a variety of life support system designs and operation strategies. These systems will be tested and evaluated in the BIO-Plex facility. An important goal of the life support program is to identify designs that best meet all size and performance constraints for a variety of possible future missions. Integrated human testing is a necessary step in reaching this goal. System modeling and analysis will also play an important role in this endeavor. Currently, simulation studies are being used to estimate air revitalization buffer and storage requirements in order to develop the infrastructure requirements of the BIO-Plex facility. Simulation studies are also being used to verify that the envisioned operation strategy will be able to meet all performance criteria. In this paper, a simulation study is presented for a nominal BIO-Plex scenario with a high-level of crop growth. A general description of the dynamic mass flow model is provided, along with some simulation results. The paper also discusses sizing and operations issues and describes plans for future simulation studies.

Goal impact influences the evaluative component of performance monitoring: Evidence from ERPs.

PubMed

Severo, Mario Carlo; Walentowska, Wioleta; Moors, Agnes; Pourtois, Gilles

2017-10-01

Successful performance monitoring (PM) requires continuous assessment of context and action outcomes. Electrophysiological studies have reliably identified event-related potential (ERP) markers for evaluative feedback processing during PM: the Feedback-Related Negativity (FRN) and P3 components. The functional significance of FRN remains debated in the literature, with recent research suggesting that feedback's goal relevance can account for FRN (amplitude) modulation, apart from its valence or expectedness alone. Extending this account, the present study assessed whether graded differentiations in feedback's relevance or importance to one's goal (referred to as goal impact) would influence PM at the FRN (and P3) level. To this end, we ran a within-subject crossover design experiment in which 40 participants completed two standard cognitive control tasks (Go/No Go and Simon), while 64-channel electroencephalography was recorded. Critically, both tasks entailed similar reward processing but systematically varied in goal impact assignment (high vs. low), manipulated through their supposed diagnosticity for daily life functioning and activation of social comparison. ERP results showed that goal impact reliably modulated FRN in a general manner. Irrespective of feedback valence, it was overall less negative in the high compared to the low impact condition, suggesting a general decrease in feedback monitoring in the former compared to the latter condition. These findings lend support to the idea that PM is best conceived operating not solely based on motor cues, but is shaped by motivational demands. Copyright © 2017 Elsevier B.V. All rights reserved.

[Perceptions of classroom goal structures, personal achievement goal orientations, and learning strategies].

PubMed

Miki, Kaori; Yamauchi, Hirotsugu

2005-08-01

We examined the relations among students' perceptions of classroom goal structures (mastery and performance goal structures), students' achievement goal orientations (mastery, performance, and work-avoidance goals), and learning strategies (deep processing, surface processing and self-handicapping strategies). Participants were 323 5th and 6th grade students in elementary schools. The results from structural equation modeling indicated that perceptions of classroom mastery goal structures were associated with students' mastery goal orientations, which were in turn related positively to the deep processing strategies and academic achievement. Perceptions of classroom performance goal stractures proved associated with work avoidance-goal orientations, which were positively related to the surface processing and self-handicapping strategies. Two types of goal structures had a positive relation with students' performance goal orientations, which had significant positive effects on academic achievement. The results of this study suggest that elementary school students' perceptions of mastery goal structures are related to adaptive patterns of learning more than perceptions of performance goal structures are. The role of perceptions of classroom goal structure in promoting students' goal orientations and learning strategies is discussed.

Achievement goals affect metacognitive judgments

PubMed Central

Ikeda, Kenji; Yue, Carole L.; Murayama, Kou; Castel, Alan D.

2017-01-01

The present study examined the effect of achievement goals on metacognitive judgments, such as judgments of learning (JOLs) and metacomprehension judgments, and actual recall performance. We conducted five experiments manipulating the instruction of achievement goals. In each experiment, participants were instructed to adopt mastery-approach goals (i.e., develop their own mental ability through a memory task) or performance-approach goals (i.e., demonstrate their strong memory ability through getting a high score on a memory task). The results of Experiments 1 and 2 showed that JOLs of word pairs in the performance-approach goal condition tended to be higher than those in the mastery-approach goal condition. In contrast, cued recall performance did not differ between the two goal conditions. Experiment 3 also demonstrated that metacomprehension judgments of text passages were higher in the performance-approach goal condition than in the mastery-approach goals condition, whereas test performance did not differ between conditions. These findings suggest that achievement motivation affects metacognitive judgments during learning, even when achievement motivation does not influence actual performance. PMID:28983496

THE APPLICATION OF MULTIVIEW METHODS FOR HIGH-PRECISION ASTROMETRIC SPACE VLBI AT LOW FREQUENCIES

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dodson, R.; Rioja, M.; Imai, H.

2013-06-15

High-precision astrometric space very long baseline interferometry (S-VLBI) at the low end of the conventional frequency range, i.e., 20 cm, is a requirement for a number of high-priority science goals. These are headlined by obtaining trigonometric parallax distances to pulsars in pulsar-black hole pairs and OH masers anywhere in the Milky Way and the Magellanic Clouds. We propose a solution for the most difficult technical problems in S-VLBI by the MultiView approach where multiple sources, separated by several degrees on the sky, are observed simultaneously. We simulated a number of challenging S-VLBI configurations, with orbit errors up to 8 mmore » in size and with ionospheric atmospheres consistent with poor conditions. In these simulations we performed MultiView analysis to achieve the required science goals. This approach removes the need for beam switching requiring a Control Moment Gyro, and the space and ground infrastructure required for high-quality orbit reconstruction of a space-based radio telescope. This will dramatically reduce the complexity of S-VLBI missions which implement the phase-referencing technique.« less

Terrestrial Planet Finder: Technology Development Plans

NASA Technical Reports Server (NTRS)

Lindensmith, Chris

2004-01-01

One of humanity's oldest questions is whether life exists elsewhere in the universe. The Terrestrial Planet Finder (TPF) mission will survey stars in our stellar neighborhood to search for planets and perform spectroscopic measurements to identify potential biomarkers in their atmospheres. In response to the recently published President's Plan for Space Exploration, TPF has plans to launch a visible-light coronagraph in 2014, and a separated-spacecraft infrared interferometer in 2016. Substantial funding has been committed to the development of the key technologies that are required to meet these goals for launch in the next decade. Efforts underway through industry and university contracts and at JPL include a number of system and subsystem testbeds, as well as components and numerical modeling capabilities. The science, technology, and design efforts are closely coupled to ensure that requirements and capabilities will be consistent and meet the science goals.

A comparison of two neural network schemes for navigation

NASA Technical Reports Server (NTRS)

Munro, Paul W.

1989-01-01

Neural networks have been applied to tasks in several areas of artificial intelligence, including vision, speech, and language. Relatively little work has been done in the area of problem solving. Two approaches to path-finding are presented, both using neural network techniques. Both techniques require a training period. Training under the back propagation (BPL) method was accomplished by presenting representations of (current position, goal position) pairs as input and appropriate actions as output. The Hebbian/interactive activation (HIA) method uses the Hebbian rule to associate points that are nearby. A path to a goal is found by activating a representation of the goal in the network and processing until the current position is activated above some threshold level. BPL, using back-propagation learning, failed to learn, except in a very trivial fashion, that is equivalent to table lookup techniques. HIA, performed much better, and required storage of fewer weights. In drawing a comparison, it is important to note that back propagation techniques depend critically upon the forms of representation used, and can be sensitive to parameters in the simulations; hence the BPL technique may yet yield strong results.

The Ionospheric Connection Explorer Mission: Mission Goals and Design

NASA Astrophysics Data System (ADS)

Immel, T. J.; England, S. L.; Mende, S. B.; Heelis, R. A.; Englert, C. R.; Edelstein, J.; Frey, H. U.; Korpela, E. J.; Taylor, E. R.; Craig, W. W.; Harris, S. E.; Bester, M.; Bust, G. S.; Crowley, G.; Forbes, J. M.; Gérard, J.-C.; Harlander, J. M.; Huba, J. D.; Hubert, B.; Kamalabadi, F.; Makela, J. J.; Maute, A. I.; Meier, R. R.; Raftery, C.; Rochus, P.; Siegmund, O. H. W.; Stephan, A. W.; Swenson, G. R.; Frey, S.; Hysell, D. L.; Saito, A.; Rider, K. A.; Sirk, M. M.

2018-02-01

The Ionospheric Connection Explorer, or ICON, is a new NASA Explorer mission that will explore the boundary between Earth and space to understand the physical connection between our world and our space environment. This connection is made in the ionosphere, which has long been known to exhibit variability associated with the sun and solar wind. However, it has been recognized in the 21st century that equally significant changes in ionospheric conditions are apparently associated with energy and momentum propagating upward from our own atmosphere. ICON's goal is to weigh the competing impacts of these two drivers as they influence our space environment. Here we describe the specific science objectives that address this goal, as well as the means by which they will be achieved. The instruments selected, the overall performance requirements of the science payload and the operational requirements are also described. ICON's development began in 2013 and the mission is on track for launch in 2018. ICON is developed and managed by the Space Sciences Laboratory at the University of California, Berkeley, with key contributions from several partner institutions.

A comparison of two neural network schemes for navigation

NASA Technical Reports Server (NTRS)

Munro, Paul

1990-01-01

Neural networks have been applied to tasks in several areas of artificial intelligence, including vision, speech, and language. Relatively little work has been done in the area of problem solving. Two approaches to path-finding are presented, both using neural network techniques. Both techniques require a training period. Training under the back propagation (BPL) method was accomplished by presenting representations of current position, goal position pairs as input and appropriate actions as output. The Hebbian/interactive activation (HIA) method uses the Hebbian rule to associate points that are nearby. A path to a goal is found by activating a representation of the goal in the network and processing until the current position is activated above some threshold level. BPL, using back-propagation learning, failed to learn, except in a very trivial fashion, that is equivalent to table lookup techniques. HIA, performed much better, and required storage of fewer weights. In drawing a comparison, it is important to note that back propagation techniques depend critically upon the forms of representation used, and can be sensitive to parameters in the simulations; hence the BPL technique may yet yield strong results.

Goal neglect and knowledge chunking in the construction of novel behaviour☆

PubMed Central

Bhandari, Apoorva; Duncan, John

2014-01-01

Task complexity is critical in cognitive efficiency and fluid intelligence. To examine functional limits in task complexity, we examine the phenomenon of goal neglect, where participants with low fluid intelligence fail to follow task rules that they otherwise understand. Though neglect is known to increase with task complexity, here we show that – in contrast to previous accounts – the critical factor is not the total complexity of all task rules. Instead, when the space of task requirements can be divided into separate sub-parts, neglect is controlled by the complexity of each component part. The data also show that neglect develops and stabilizes over the first few performance trials, i.e. as instructions are first used to generate behaviour. In all complex behaviour, a critical process is combination of task events with retrieved task requirements to create focused attentional episodes dealing with each decision in turn. In large part, we suggest, fluid intelligence may reflect this process of converting complex requirements into effective attentional episodes. PMID:24141034

An assessment of technology alternatives for telecommunications and information management for the space exploration initiative

NASA Technical Reports Server (NTRS)

Ponchak, Denise S.; Zuzek, John E.

1991-01-01

On the 20th anniversary of the Apollo 11 lunar landing, President Bush set forth ambitious goals for expanding human presence in the solar system. The Space Exploration Initiative (SEI) addresses these goals beginning with Space Station Freedom, followed by a permanent return to the Moon, and a manned mission to Mars. A well designed, adaptive Telecommunications, Navigation, and Information Management (TNIM) infrastructure is vital to the success of these missions. Utilizing initial projections of user requirements, a team under the direction of NASA's Office of Space Operations developed overall architectures and point designs to implement the TNIM functions for the Lunar and Mars mission scenarios. Based on these designs, an assessment of technology alternatives for the telecommunications and information management functions was performed. This technology assessment identifies technology developments necessary to meet the telecommunications and information management system requirements for SEI. Technology requirements, technology needs and alternatives, the present level of technology readiness in each area, and a schedule for development are presented.

Goal Orientations of General Chemistry Students via the Achievement Goal Framework

ERIC Educational Resources Information Center

Lewis, Scott E.

2018-01-01

The Achievement Goal Framework describes students' goal orientations as: task-based, focusing on the successful completion of the task; self-based, evaluating performance relative to one's own past performance; or other-based, evaluating performance relative to the performance of others. Goal orientations have been used to explain student success…

The correlation between achievement goals, learning strategies, and motivation in medical students.

PubMed

Kim, Sun; Hur, Yera; Park, Joo Hyun

2014-03-01

The purpose of this study is to investigate the pursuit of achievement goals in medical students and to assess the relationship between achievement goals, learning strategy, and motivation. Two hundred seventy freshman and sophomore premedical students and sophomore medical school students participated in this study, which used the Achievement Goals Scale and the Self-Regulated Learning Strategy Questionnaire. The achievement goals of medical students were oriented toward moderate performance approach levels, slightly high performance avoidance levels, and high mastery goals. About 40% of the students were high or low in all three achievement goals. The most successful adaptive learners in the areas of learning strategies, motivation, and school achievement were students from group 6, who scored high in both performance approach and mastery goals but low in performance avoidance goals. And goal achievement are related to the academic self-efficacy, learning strategies, and motivation in medical students. In the context of academic achievement, mastery goals and performance approach goals are adaptive goals.

Ultra-Sensitive Transition-Edge Sensors for the Background Limited Infrared/Sub-mm Spectrograph (BLISS)

NASA Technical Reports Server (NTRS)

Beyer, A. D.; Kenyon, M. E.; Echternach, P. M.; Chui, T.; Eom, B.-H.; Day, P. K.; Bock, J. J.; Holmes, W.A.; Bradford, C. M.

2011-01-01

We report progress in fabricating ultra-sensitive superconducting transition-edge sensors (TESs) for BLISS. BLISS is a suite of grating spectrometers covering 35-433 micron with R approx. 700 cooled to 50 mK that is proposed to fly on the Japanese space telescope SPICA. The detector arrays for BLISS are TES bolometers readout with a time domain SQUID multiplexer. The required noise equivalent power (NEP) for BLISS is NEP = 10(exp -19) W/Hz(exp 1/2) with an ultimate goal of NEP= 5 x 10(exp -20) W/Hz(exp 1/2) to achieve background limited noise performance. The required and goal response times are tau = 150 ms and tau = 50ms respectively to achieve the NEP at the required and goal optical chop frequency 1-5 Hz. We measured prototype BLISS arrays and have achieved NEP = 6 x 10(exp -18) W/Hz(exp 1/2) and tau = 1.4 ms with a Ti TES (T(sub C) = 565 mK) and NEP approx. 2.5 x 10(exp -19) W/Hz(exp 1/2) and tau approximates 4.5 ms with an Ir TES (T(sub C) = 130 mK). Dark power for these tests is estimated at 1-5 fW.

Economic Metrics for Commercial Reusable Space Transportation Systems

NASA Technical Reports Server (NTRS)

Shaw, Eric J.; Hamaker, Joseph (Technical Monitor)

2000-01-01

The success of any effort depends upon the effective initial definition of its purpose, in terms of the needs to be satisfied and the goals to be fulfilled. If the desired product is "A System" that is well-characterized, these high-level need and goal statements can be transformed into system requirements by traditional systems engineering techniques. The satisfaction of well-designed requirements can be tracked by fairly straightforward cost, schedule, and technical performance metrics. Unfortunately, some types of efforts, including those that NASA terms "Programs," tend to resist application of traditional systems engineering practices. In the NASA hierarchy of efforts, a "Program" is often an ongoing effort with broad, high-level goals and objectives. A NASA "project" is a finite effort, in terms of budget and schedule, that usually produces or involves one System. Programs usually contain more than one project and thus more than one System. Special care must be taken in the formulation of NASA Programs and their projects, to ensure that lower-level project requirements are traceable to top-level Program goals, feasible with the given cost and schedule constraints, and measurable against top-level goals. NASA Programs and projects are tasked to identify the advancement of technology as an explicit goal, which introduces more complicating factors. The justification for funding of technology development may be based on the technology's applicability to more than one System, Systems outside that Program or even external to NASA. Application of systems engineering to broad-based technology development, leading to effective measurement of the benefits, can be valid, but it requires that potential beneficiary Systems be organized into a hierarchical structure, creating a "system of Systems." In addition, these Systems evolve with the successful application of the technology, which creates the necessity for evolution of the benefit metrics to reflect the changing baseline. Still, economic metrics for technology development in these Programs and projects remain fairly straightforward, being based on reductions in acquisition and operating costs of the Systems. One of the most challenging requirements that NASA levies on its Programs is to plan for the commercialization of the developed technology. Some NASA Programs are created for the express purpose of developing technology for a particular industrial sector, such as aviation or space transportation, in financial partnership with that sector. With industrial investment, another set of goals, constraints and expectations are levied on the technology program. Economic benefit metrics then expand beyond cost and cost savings to include the marketability, profit, and investment return requirements of the private sector. Commercial investment criteria include low risk, potential for high return, and strategic alignment with existing product lines. These corporate criteria derive from top-level strategic plans and investment goals, which rank high among the most proprietary types of information in any business. As a result, top-level economic goals and objectives that industry partners bring to cooperative programs cannot usually be brought into technical processes, such as systems engineering, that are worked collaboratively between Industry and Government. In spite of these handicaps, the top-level economic goals and objectives of a joint technology program can be crafted in such a way that they accurately reflect the fiscal benefits from both Industry and Government perspectives. Valid economic metrics can then be designed that can track progress toward these goals and objectives, while maintaining the confidentiality necessary for the competitive process.

A Systematic Review Investigating Healthy Lifestyle Interventions Incorporating Goal Setting Strategies for Preventing Excess Gestational Weight Gain

PubMed Central

Brown, Mary Jane; Sinclair, Marlene; Liddle, Dianne; Hill, Alyson J.; Madden, Elaine; Stockdale, Janine

2012-01-01

Background Excess gestational weight gain (GWG) is an important risk factor for long term obesity in women. However, current interventions aimed at preventing excess GWG appear to have a limited effect. Several studies have highlighted the importance of linking theory with empirical evidence for producing effective interventions for behaviour change. Theorists have demonstrated that goals can be an important source of human motivation and goal setting has shown promise in promoting diet and physical activity behaviour change within non-pregnant individuals. The use of goal setting as a behaviour change strategy has been systematically evaluated within overweight and obese individuals, yet its use within pregnancy has not yet been systematically explored. Aim of review To explore the use of goal setting within healthy lifestyle interventions for the prevention of excess GWG. Data collection and analysis Searches were conducted in seven databases alongside hand searching of relevant journals and citation tracking. Studies were included if interventions used goal setting alongside modification of diet and/or physical activity with an aim to prevent excess GWG. The PRISMA guidelines were followed and a two-stage methodological approach was used. Stage one focused on systematically evaluating the methodological quality of included interventions. The second stage assessed intervention integrity and the implementation of key goal setting components. Findings From a total of 839 citations, 54 full-text articles were assessed for eligibility and 5 studies met the inclusion criteria. Among interventions reporting positive results a combination of individualised diet and physical activity goals, self-monitoring and performance feedback indicators were described as active components. Conclusion Interventions based on goal setting appear to be useful for helping women achieve optimal weight gain during pregnancy. However, overweight and obese women may require more theoretically-designed interventions. Further high quality, theoretically-designed interventions are required to determine the most effective and replicable components for optimal GWG. PMID:22792178

A systematic review investigating healthy lifestyle interventions incorporating goal setting strategies for preventing excess gestational weight gain.

PubMed

Brown, Mary Jane; Sinclair, Marlene; Liddle, Dianne; Hill, Alyson J; Madden, Elaine; Stockdale, Janine

2012-01-01

Excess gestational weight gain (GWG) is an important risk factor for long term obesity in women. However, current interventions aimed at preventing excess GWG appear to have a limited effect. Several studies have highlighted the importance of linking theory with empirical evidence for producing effective interventions for behaviour change. Theorists have demonstrated that goals can be an important source of human motivation and goal setting has shown promise in promoting diet and physical activity behaviour change within non-pregnant individuals. The use of goal setting as a behaviour change strategy has been systematically evaluated within overweight and obese individuals, yet its use within pregnancy has not yet been systematically explored. To explore the use of goal setting within healthy lifestyle interventions for the prevention of excess GWG. Searches were conducted in seven databases alongside hand searching of relevant journals and citation tracking. Studies were included if interventions used goal setting alongside modification of diet and/or physical activity with an aim to prevent excess GWG. The PRISMA guidelines were followed and a two-stage methodological approach was used. Stage one focused on systematically evaluating the methodological quality of included interventions. The second stage assessed intervention integrity and the implementation of key goal setting components. From a total of 839 citations, 54 full-text articles were assessed for eligibility and 5 studies met the inclusion criteria. Among interventions reporting positive results a combination of individualised diet and physical activity goals, self-monitoring and performance feedback indicators were described as active components. Interventions based on goal setting appear to be useful for helping women achieve optimal weight gain during pregnancy. However, overweight and obese women may require more theoretically-designed interventions. Further high quality, theoretically-designed interventions are required to determine the most effective and replicable components for optimal GWG.

Integration of a zebrafish research project into a molecular biology course to support critical thinking and course content goals.

PubMed

Felzien, Lisa K

2016-11-12

Engaging undergraduates in research is essential for teaching them to think like scientists, and it has become a desired component of classroom and laboratory instruction. Research projects that span an entire semester expose students to a variety of concepts and techniques and allow students to use experiments to learn scientific principles, understand why specific techniques are applicable, critically analyze varied data, and examine how experimentation leads to acquiring knowledge. To provide an experience with these features, a semester long research project was integrated into a combined lecture and laboratory course, Molecular Biology. The project utilized the zebrafish model to examine gene expression during embryonic development and required students to develop and test hypotheses about the timing of expression of previously uncharacterized genes. The main goals for the project were to provide opportunities for students to develop critical thinking skills required for conducting research and to support the content goals of the course. To determine whether these goals were met, student performance on the steps of the project and related pre-test and post-test questions was examined. © 2016 by The International Union of Biochemistry and Molecular Biology, 44(6):565-573, 2016. © 2016 The International Union of Biochemistry and Molecular Biology.

Climate Science Performance, Data and Productivity on Titan

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mayer, Benjamin W; Worley, Patrick H; Gaddis, Abigail L

2015-01-01

Climate Science models are flagship codes for the largest of high performance computing (HPC) resources, both in visibility, with the newly launched Department of Energy (DOE) Accelerated Climate Model for Energy (ACME) effort, and in terms of significant fractions of system usage. The performance of the DOE ACME model is captured with application level timers and examined through a sizeable run archive. Performance and variability of compute, queue time and ancillary services are examined. As Climate Science advances in the use of HPC resources there has been an increase in the required human and data systems to achieve programs goals.more » A description of current workflow processes (hardware, software, human) and planned automation of the workflow, along with historical and projected data in motion and at rest data usage, are detailed. The combination of these two topics motivates a description of future systems requirements for DOE Climate Modeling efforts, focusing on the growth of data storage and network and disk bandwidth required to handle data at an acceptable rate.« less

A Summary on Progress in Materials Development for Advanced Lithium-ion Cells for NASA's Exploration Missions

NASA Technical Reports Server (NTRS)

Reid, Concha M.

2011-01-01

Vehicles and stand-alone power systems that enable the next generation of human missions to the moon will require energy storage systems that are safer, lighter, and more compact than current state-of-the-art (SOA) aerospace quality lithium-ion (Li-ion) batteries. NASA is developing advanced Li-ion cells to enable or enhance future human missions to Near Earth Objects, such as asteroids, planets, moons, libration points, and orbiting structures. Advanced, high-performing materials are required to provide component-level performance that can offer the required gains at the integrated cell level. Although there is still a significant amount of work yet to be done, the present state of development activities has resulted in the synthesis of promising materials that approach the ultimate performance goals. This paper on interim progress of the development efforts will present performance of materials and cell components and will elaborate on the challenges of the development activities and proposed strategies to overcome technical issues.

Progress in Materials and Component Development for Advanced Lithium-ion Cells for NASA's Exploration Missions

NASA Technical Reports Server (NTRS)

Reid, Concha, M.; Reid, Concha M.

2011-01-01

Vehicles and stand-alone power systems that enable the next generation of human missions to the Moon will require energy storage systems that are safer, lighter, and more compact than current state-of-the- art (SOA) aerospace quality lithium-ion (Li-ion) batteries. NASA is developing advanced Li-ion cells to enable or enhance the power systems for the Altair Lunar Lander, Extravehicular Activities spacesuit, and rovers and portable utility pallets for Lunar Surface Systems. Advanced, high-performing materials are required to provide component-level performance that can offer the required gains at the integrated cell level. Although there is still a significant amount of work yet to be done, the present state of development activities has resulted in the synthesis of promising materials that approach the ultimate performance goals. This report on interim progress of the development efforts will elaborate on the challenges of the development activities, proposed strategies to overcome technical issues, and present performance of materials and cell components.

Performance management and goal ambiguity: managerial implications in a single payer system.

PubMed

Calciolari, Stefano; Cantù, Elena; Fattore, Giovanni

2011-01-01

Goal ambiguity influences the effectiveness of performance management systems to drive organizations toward enhanced results. The literature analyzes the antecedents of goal ambiguity and shows the influence of goal ambiguity on the performance of U.S. federal agencies. However, no study has analyzed goal ambiguity in other countries or in health care systems. This study has three aims: to test the validity of a measurement instrument for goal ambiguity, to investigate its main antecedents, and to explore the relationship between goal ambiguity and organizational performance in a large, public, Beveridge-type health care system. A nationwide survey of general managers of the Italian national health system was performed. A factor analysis was used to validate the mono-dimensionality of an instrument that measured goal ambiguity. Structural equation modeling was used to test both the antecedents and the influence of goal ambiguity on organizational performance. Data from 135 health care organizations (53% response rate) were available for analysis. The results confirm the mono-dimensionality of the instrument, the existence of two environmental sources of ambiguity (political endorsement and governance commitment), and the negative relationship between goal ambiguity and organizational performance. Goal ambiguity matters because it may hamper organizational performance. Therefore, performance should be fostered by reducing goal ambiguity (e.g., goal-setting model, funding arrangements, and political support). Mutatis mutandis, our results may apply to public health care systems of other countries or other "public interest" sectors, such as social care and education.

Advanced Materials and Component Development for Lithium-ion Cells for NASA Missions

NASA Technical Reports Server (NTRS)

Reid, Concha M.

2012-01-01

Human missions to Near Earth Objects, such as asteroids, planets, moons, libration points, and orbiting structures, will require safe, high specific energy, high energy density batteries to provide new or extended capabilities than are possible with today s state-of-the-art aerospace batteries. The National Aeronautics and Space Administration is developing advanced High Energy and Ultra High Energy lithium-ion cells to address these needs. In order to meet the performance goals, advanced, high-performing materials are required to provide improved performance at the component-level that contributes to performance at the integrated cell level. This paper will provide an update on the performance of experimental materials through the completion of two years of development. The progress of materials development, remaining challenges, and an outlook for the future of these materials in near term cell products will be discussed.

Correlation between academic achievement goal orientation and the performance of Malaysian students in an Indian medical school.

PubMed

Barkur, Rajashekar Rao; Govindan, Sreejith; Kamath, Asha

2013-01-01

According to goal orientation theory, achievement goals are defined as the terminal point towards which one's efforts are directed. The four academic achievement goal orientations commonly recognised are mastery, performance approach, performance avoidance and work avoidance. The objective of this study was to understand the goal orientation of second year undergraduate medical students and how this correlates with their academic performance. The study population consisted of 244 second year Bachelor of Medicine and Bachelor of Surgery (MBBS) students of Melaka Manipal Medical College, Manipal campus, Manipal University, India. Students were categorised as high performers and low performers based on their first year university examination marks. Their goal orientations were assessed through a validated questionnaire developed by Was et al. These components were analysed by independent sample t-test and correlated to their first year university examination marks. Confirmatory component factor analysis extracted four factors, which accounted for 40.8% of the total variance in goal orientation. The performance approach goal orientation alone explained 16.7% of the variance followed by mastery (10.8%), performance avoidance (7.7%) and work avoidance (5.7%). The Cronbach's alpha for 19 items, which contributed to internal consistency of the tool, was observed to be 0.635. A strong positive correlation was shown between performance approach, performance avoidance and work avoidance orientations. Of the four goal orientations, only the mean scores in work avoidance orientation differed for low performers and high performers (5.0 vs. 4.3; P = 0.0003). Work avoidance type of goal orientation among the low performer group may account for their lower performance compared with high performer group. This indicates that academic achievement goal orientation may play a role in the performance of undergraduate medical students.

General lighting requirements for photosynthesis

NASA Technical Reports Server (NTRS)

Geiger, Donald R.

1994-01-01

This paper presents data that suggests some criteria for evaluating growth chamber and greenhouse lighting. A review of the general lighting requirements for photosynthesis reveals that four aspects of light are important: irradiance, quality, timing, and duration. Effective lighting should produce plants that perform according to the goals of the project. For example, for physiological studies the plants probably should exhibit morphology and physiology similar to that found in field-grown plants. For other projects the criteria will obviously be set according to the reason for raising the plants.

A nationwide survey of state-mandated evaluation practices for domestic violence agencies.

PubMed

Riger, Stephanie; Staggs, Susan L

2011-01-01

Many agencies serving survivors of domestic violence are required to evaluate their services. Three possible evaluation strategies include: a) process measurement, which typically involves a frequency count of agency activities, such as the number of counseling hours given; b) outcome evaluation, which measures the impact of agency activities on clients, such as increased understanding of the dynamics of abuse; or c) performance measurement, which assesses the extent to which agencies achieve their stated goals. Findings of a telephone survey of state funders of domestic violence agencies in the United States revealed that most states (67%) require only process measurement, while fewer than 10% require performance measurement. Most (69%) funders reported satisfaction with their evaluation strategy and emphasized the need for involvement of all stakeholders, especially grantees, in developing an evaluation.

High efficiency low cost monolithic module for SARSAT distress beacons

NASA Technical Reports Server (NTRS)

Petersen, Wendell C.; Siu, Daniel P.

1992-01-01

The program objectives were to develop a highly efficient, low cost RF module for SARSAT beacons; achieve significantly lower battery current drain, amount of heat generated, and size of battery required; utilize MMIC technology to improve efficiency, reliability, packaging, and cost; and provide a technology database for GaAs based UHF RF circuit architectures. Presented in viewgraph form are functional block diagrams of the SARSAT distress beacon and beacon RF module as well as performance goals, schematic diagrams, predicted performances, and measured performances for the phase modulator and power amplifier.

Development of a water-escape motivated version of the Stone T-maze for mice

PubMed Central

Pistell, Paul J.; Ingram, Donald K.

2014-01-01

Mice provide a highly valuable resource for investigating learning and memory processes; however, many of the established tasks for evaluating learning and memory were developed for rats. Behaviors of mice in these tasks appear to be driven by different motivational factors, and as a result, they often do not perform reliably on tasks involving rewards traditionally used for rats. Because of difficulties in measuring learning and memory in mice as well as the need to have a task that can reliably measure these behavioral processes, we have developed a mouse version of the Stone T-maze utilizing what appears to be the primary motivation of mice, escape to a safe location. Specifically, we have constructed a task that requires the mouse to wade through water to reach a dark and dry goal box. To escape this aversive environment, the Stone T-maze requires learning the correct sequence of 13 left and right turns to reach the goal box. Through a series of experiments examining a variety of protocols, it was found that mice will reliably perform this task. This task can be used to assess learning and memory without the potential performance confounds that can affect performance of mice in other tasks. We believe this task offers a valuable new tool for evaluating learning and memory in mice not previously available to researchers. PMID:20026250

Energy Efficient Engine: Combustor component performance program

NASA Technical Reports Server (NTRS)

Dubiel, D. J.

1986-01-01

The results of the Combustor Component Performance analysis as developed under the Energy Efficient Engine (EEE) program are presented. This study was conducted to demonstrate the aerothermal and environmental goals established for the EEE program and to identify areas where refinements might be made to meet future combustor requirements. In this study, a full annular combustor test rig was used to establish emission levels and combustor performance for comparison with those indicated by the supporting technology program. In addition, a combustor sector test rig was employed to examine differences in emissions and liner temperatures obtained during the full annular performance and supporting technology tests.

24 CFR 135.30 - Numerical goals for meeting the greatest extent feasible requirement.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 24 Housing and Urban Development 1 2012-04-01 2012-04-01 false Numerical goals for meeting the... Concerns § 135.30 Numerical goals for meeting the greatest extent feasible requirement. (a) General. (1... of section 3 by meeting the numerical goals set forth in this section for providing training...

24 CFR 135.30 - Numerical goals for meeting the greatest extent feasible requirement.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 24 Housing and Urban Development 1 2013-04-01 2013-04-01 false Numerical goals for meeting the... Concerns § 135.30 Numerical goals for meeting the greatest extent feasible requirement. (a) General. (1... of section 3 by meeting the numerical goals set forth in this section for providing training...

24 CFR 135.30 - Numerical goals for meeting the greatest extent feasible requirement.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 24 Housing and Urban Development 1 2011-04-01 2011-04-01 false Numerical goals for meeting the... Concerns § 135.30 Numerical goals for meeting the greatest extent feasible requirement. (a) General. (1... of section 3 by meeting the numerical goals set forth in this section for providing training...

24 CFR 135.30 - Numerical goals for meeting the greatest extent feasible requirement.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 24 Housing and Urban Development 1 2014-04-01 2014-04-01 false Numerical goals for meeting the... Concerns § 135.30 Numerical goals for meeting the greatest extent feasible requirement. (a) General. (1... of section 3 by meeting the numerical goals set forth in this section for providing training...

Academic goals in surgery.

PubMed

Bleier, Joshua I S; Kann, Brian

2013-12-01

The development of an academic surgical career can be an overwhelming prospect, and one that is not intuitive. Establishing a structured plan and support structure is critical to success. Starting a successful academic surgical career begins with defining one's academic goals within several broad categories: personal goals, academic goals, research goals, educational goals, and financial goals. Learning the art of self-promotion is the means by which many of these goals are achieved. It is important to realize that achieving these goals requires a delicate personal balance between work and home life, and the key ways in which to achieve success require establishment of well thought-out goals, a reliable support structure, realistic and clear expectations, and frequent re-evaluation.

Achievement Goal Orientations and Adolescents’ Subjective Well-Being in School: The Mediating Roles of Academic Social Comparison Directions

PubMed Central

Tian, Lili; Yu, Tingting; Huebner, E. Scott

2017-01-01

The purpose of this study was to examine the multiple mediational roles of academic social comparison directions (upward academic social comparison and downward academic social comparison) on the relationships between achievement goal orientations (i.e., mastery goals, performance-approach goals, and performance-avoidance goals) and subjective well-being (SWB) in school (school satisfaction, school affect) in adolescent students in China. A total of 883 Chinese adolescent students (430 males; Mean age = 12.99) completed a multi-measure questionnaire. Structural equation modeling was used to examine the hypotheses. Results indicated that (1) mastery goal orientations and performance-approach goal orientations both showed a statistically significant, positive correlation with SWB in school whereas performance-avoidance goal orientations showed a statistically significant, negative correlation with SWB in school among adolescents; (2) upward academic social comparisons mediated the relation between the three types of achievement goal orientations (i.e., mastery goals, performance-approach goals, and performance-avoidance goals) and SWB in school; (3) downward academic social comparisons mediated the relation between mastery goal orientations and SWB in school as well as the relation between performance-avoidance goal orientations and SWB in school. The findings suggest possible important cultural differences in the antecedents of SWB in school in adolescent students in China compared to adolescent students in Western nations. PMID:28197109

Using Performance Feedback and Goal Setting to Improve Elementary Students' Writing Fluency: A Randomized Controlled Trial

ERIC Educational Resources Information Center

Koenig, Elizabeth A.; Eckert, Tanya L.; Hier, Bridget O.

2016-01-01

Although performance feedback interventions successfully lead to improvements in students' performance, research suggests that the combination of feedback and goal setting leads to greater performance than either component alone and that graphing performance in relation to a goal can lead to improvements in academic performance. The goal of the…

Remembering to learn: independent place and journey coding mechanisms contribute to memory transfer.

PubMed

Bahar, Amir S; Shapiro, Matthew L

2012-02-08

The neural mechanisms that integrate new episodes with established memories are unknown. When rats explore an environment, CA1 cells fire in place fields that indicate locations. In goal-directed spatial memory tasks, some place fields differentiate behavioral histories ("journey-dependent" place fields) while others do not ("journey-independent" place fields). To investigate how these signals inform learning and memory for new and familiar episodes, we recorded CA1 and CA3 activity in rats trained to perform a "standard" spatial memory task in a plus maze and in two new task variants. A "switch" task exchanged the start and goal locations in the same environment; an "altered environment" task contained unfamiliar local and distal cues. In the switch task, performance was mildly impaired, new firing maps were stable, but the proportion and stability of journey-dependent place fields declined. In the altered environment, overall performance was strongly impaired, new firing maps were unstable, and stable proportions of journey-dependent place fields were maintained. In both tasks, memory errors were accompanied by a decline in journey codes. The different dynamics of place and journey coding suggest that they reflect separate mechanisms and contribute to distinct memory computations. Stable place fields may represent familiar relationships among environmental features that are required for consistent memory performance. Journey-dependent activity may correspond with goal-directed behavioral sequences that reflect expectancies that generalize across environments. The complementary signals could help link current events with established memories, so that familiarity with either a behavioral strategy or an environment can inform goal-directed learning.

REMEMBERING TO LEARN: INDEPENDENT PLACE AND JOURNEY CODING MECHANISMS CONTRIBUTE TO MEMORY TRANSFER

PubMed Central

Bahar, Amir S.; Shapiro, Matthew L.

2012-01-01

The neural mechanisms that integrate new episodes with established memories are unknown. When rats explore an environment, CA1 cells fire in place fields that indicate locations. In goal-directed spatial memory tasks, some place fields differentiate behavioral histories (journey-dependent place fields) while others do not (journey-independent place fields). To investigate how these signals inform learning and memory for new and familiar episodes, we recorded CA1 and CA3 activity in rats trained to perform a standard spatial memory task in a plus maze and in two new task variants. A switch task exchanged the start and goal locations in the same environment; an altered environment task contained unfamiliar local and distal cues. In the switch task, performance was mildly impaired, new firing maps were stable, but the proportion and stability of journey-dependent place fields declined. In the altered environment, overall performance was strongly impaired, new firing maps were unstable, and stable proportions of journey-dependent place fields were maintained. In both tasks, memory errors were accompanied by a decline in journey codes. The different dynamics of place and journey coding suggest that they reflect separate mechanisms and contribute to distinct memory computations. Stable place fields may represent familiar relationships among environmental features that are required for consistent memory performance. Journey-dependent activity may correspond with goal directed behavioral sequences that reflect expectancies that generalize across environments. The complementary signals could help link current events with established memories, so that familiarity with either a behavioral strategy or an environment can inform goal-directed learning. PMID:22323731

Overview of space power electronic's technology under the CSTI High Capacity Power Program

NASA Technical Reports Server (NTRS)

Schwarze, Gene E.

1994-01-01

The Civilian Space Technology Initiative (CSTI) is a NASA Program targeted at the development of specific technologies in the areas of transportation, operations and science. Each of these three areas consists of major elements and one of the operation's elements is the High Capacity Power element. The goal of this element is to develop the technology base needed to meet the long duration, high capacity power requirements for future NASA initiatives. The High Capacity Power element is broken down into several subelements that includes energy conversion in the areas of the free piston Stirling power converter and thermoelectrics, thermal management, power management, system diagnostics, and environmental compatibility and system's lifetime. A recent overview of the CSTI High capacity Power element and a description of each of the program's subelements is given by Winter (1989). The goals of the Power Management subelement are twofold. The first is to develop, test, and demonstrate high temperature, radiation-resistant power and control components and circuits that will be needed in the Power Conditioning, Control and Transmission (PCCT) subsystem of a space nuclear power system. The results obtained under this goal will also be applicable to the instrumentation and control subsystem of a space nuclear reactor. These components and circuits must perform reliably for lifetimes of 7-10 years. The second goal is to develop analytical models for use in computer simulations of candidate PCCT subsystems. Circuits which will be required for a specific PCCT subsystem will be designed and built to demonstrate their performance and, also, to validate the analytical models and simulations. The tasks under the Power Management subelement will now be described in terms of objectives, approach and present status of work.

Requirements Modeling with Agent Programming

NASA Astrophysics Data System (ADS)

Dasgupta, Aniruddha; Krishna, Aneesh; Ghose, Aditya K.

Agent-oriented conceptual modeling notations are highly effective in representing requirements from an intentional stance and answering questions such as what goals exist, how key actors depend on each other, and what alternatives must be considered. In this chapter, we review an approach to executing i* models by translating these into set of interacting agents implemented in the CASO language and suggest how we can perform reasoning with requirements modeled (both functional and non-functional) using i* models. In this chapter we particularly incorporate deliberation into the agent design. This allows us to benefit from the complementary representational capabilities of the two frameworks.

Experiment Pointing Subsystems (EPS) requirements for Spacelab missions

NASA Technical Reports Server (NTRS)

Nein, M. E.; Nicaise, P. D.

1975-01-01

The goal of the experiment pointing subsystems (EPS) is to accommodate a broad spectrum of instrument types by providing a number of stability and control functions that greatly exceed the capability of the shuttle. These functions include target acquisition, target tracking through wide gimbal ranges, stabilization, simultaneous pointing to one or more targets, instrument rastering, and on-orbit calibration. The experiments will vary widely in size, weight, geometry, and instrument types, and many have not been completely defined. This great diversity of requirements reflects the long term plans of the user community and establishes challenging performance requirements for the EPS.

Functional Performance of Pyrovalves

NASA Technical Reports Server (NTRS)

Bement, Laurence J.

1996-01-01

Following several flight and ground test failures of spacecraft systems using single-shot, 'normally closed' pyrotechnically actuated valves (pyrovalves), a government/industry cooperative program was initiated to assess the functional performance of five qualified designs. The goal of the program was to improve performance-based requirements for the procurement of pyrovalves. Specific objectives included the demonstration of performance test methods, the measurement of 'blowby' (the passage of gases from the pyrotechnic energy source around the activating piston into the valve's fluid path), and the quantification of functional margins for each design. Experiments were conducted in-house at NASA on several units each of the five valve designs. The test methods used for this program measured the forces and energies required to actuate the valves, as well as the energies and the pressures (where possible) delivered by the pyrotechnic sources. Functional performance ranged widely among the designs. Blowby cannot be prevented by o-ring seals; metal-to-metal seals were effective. Functional margin was determined by dividing the energy delivered by the pyrotechnic sources in excess to that required to accomplish the function by the energy required for that function. All but two designs had adequate functional margins with the pyrotechnic cartridges evaluated.

Orbital prefrontal cortex is required for object-in-place scene memory but not performance of a strategy implementation task.

PubMed

Baxter, Mark G; Gaffan, David; Kyriazis, Diana A; Mitchell, Anna S

2007-10-17

The orbital prefrontal cortex is thought to be involved in behavioral flexibility in primates, and human neuroimaging studies have identified orbital prefrontal activation during episodic memory encoding. The goal of the present study was to ascertain whether deficits in strategy implementation and episodic memory that occur after ablation of the entire prefrontal cortex can be ascribed to damage to the orbital prefrontal cortex. Rhesus monkeys were preoperatively trained on two behavioral tasks, the performance of both of which is severely impaired by the disconnection of frontal cortex from inferotemporal cortex. In the strategy implementation task, monkeys were required to learn about two categories of objects, each associated with a different strategy that had to be performed to obtain food reward. The different strategies had to be applied flexibly to optimize the rate of reward delivery. In the scene memory task, monkeys learned 20 new object-in-place discrimination problems in each session. Monkeys were tested on both tasks before and after bilateral ablation of orbital prefrontal cortex. These lesions impaired new scene learning but had no effect on strategy implementation. This finding supports a role for the orbital prefrontal cortex in memory but places limits on the involvement of orbital prefrontal cortex in the representation and implementation of behavioral goals and strategies.

An Approach to Experimental Design for the Computer Analysis of Complex Phenomenon

NASA Technical Reports Server (NTRS)

Rutherford, Brian

2000-01-01

The ability to make credible system assessments, predictions and design decisions related to engineered systems and other complex phenomenon is key to a successful program for many large-scale investigations in government and industry. Recently, many of these large-scale analyses have turned to computational simulation to provide much of the required information. Addressing specific goals in the computer analysis of these complex phenomenon is often accomplished through the use of performance measures that are based on system response models. The response models are constructed using computer-generated responses together with physical test results where possible. They are often based on probabilistically defined inputs and generally require estimation of a set of response modeling parameters. As a consequence, the performance measures are themselves distributed quantities reflecting these variabilities and uncertainties. Uncertainty in the values of the performance measures leads to uncertainties in predicted performance and can cloud the decisions required of the analysis. A specific goal of this research has been to develop methodology that will reduce this uncertainty in an analysis environment where limited resources and system complexity together restrict the number of simulations that can be performed. An approach has been developed that is based on evaluation of the potential information provided for each "intelligently selected" candidate set of computer runs. Each candidate is evaluated by partitioning the performance measure uncertainty into two components - one component that could be explained through the additional computational simulation runs and a second that would remain uncertain. The portion explained is estimated using a probabilistic evaluation of likely results for the additional computational analyses based on what is currently known about the system. The set of runs indicating the largest potential reduction in uncertainty is then selected and the computational simulations are performed. Examples are provided to demonstrate this approach on small scale problems. These examples give encouraging results. Directions for further research are indicated.

User's manual for rocket combustor interactive design (ROCCID) and analysis computer program. Volume 2: Appendixes A-K

NASA Technical Reports Server (NTRS)

Muss, J. A.; Nguyen, T. V.; Johnson, C. W.

1991-01-01

The appendices A-K to the user's manual for the rocket combustor interactive design (ROCCID) computer program are presented. This includes installation instructions, flow charts, subroutine model documentation, and sample output files. The ROCCID program, written in Fortran 77, provides a standardized methodology using state of the art codes and procedures for the analysis of a liquid rocket engine combustor's steady state combustion performance and combustion stability. The ROCCID is currently capable of analyzing mixed element injector patterns containing impinging like doublet or unlike triplet, showerhead, shear coaxial and swirl coaxial elements as long as only one element type exists in each injector core, baffle, or barrier zone. Real propellant properties of oxygen, hydrogen, methane, propane, and RP-1 are included in ROCCID. The properties of other propellants can be easily added. The analysis models in ROCCID can account for the influences of acoustic cavities, helmholtz resonators, and radial thrust chamber baffles on combustion stability. ROCCID also contains the logic to interactively create a combustor design which meets input performance and stability goals. A preliminary design results from the application of historical correlations to the input design requirements. The steady state performance and combustion stability of this design is evaluated using the analysis models, and ROCCID guides the user as to the design changes required to satisfy the user's performance and stability goals, including the design of stability aids. Output from ROCCID includes a formatted input file for the standardized JANNAF engine performance prediction procedure.

Methodology for Evaluating Security Controls Based on Key Performance Indicators and Stakeholder Mission

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sheldon, Frederick T; Abercrombie, Robert K; Mili, Ali

2009-01-01

Information security continues to evolve in response to disruptive changes with a persistent focus on information-centric controls and a healthy debate about balancing endpoint and network protection, with a goal of improved enterprise/business risk management. Economic uncertainty, intensively collaborative styles of work, virtualization, increased outsourcing and ongoing compliance pressures require careful consideration and adaptation. This paper proposes a Cyberspace Security Econometrics System (CSES) that provides a measure (i.e., a quantitative indication) of reliability, performance and/or safety of a system that accounts for the criticality of each requirement as a function of one or more stakeholders interests in that requirement. Formore » a given stakeholder, CSES reflects the variance that may exist among the stakes she/he attaches to meeting each requirement. This paper introduces the basis, objectives and capabilities for the CSES including inputs/outputs as well as the structural and mathematical underpinnings.« less

Efficient spares matrix multiplication scheme for the CYBER 203

NASA Technical Reports Server (NTRS)

Lambiotte, J. J., Jr.

1984-01-01

This work has been directed toward the development of an efficient algorithm for performing this computation on the CYBER-203. The desire to provide software which gives the user the choice between the often conflicting goals of minimizing central processing (CPU) time or storage requirements has led to a diagonal-based algorithm in which one of three types of storage is selected for each diagonal. For each storage type, an initialization sub-routine estimates the CPU and storage requirements based upon results from previously performed numerical experimentation. These requirements are adjusted by weights provided by the user which reflect the relative importance the user places on the resources. The three storage types employed were chosen to be efficient on the CYBER-203 for diagonals which are sparse, moderately sparse, or dense; however, for many densities, no diagonal type is most efficient with respect to both resource requirements. The user-supplied weights dictate the choice.

When performance-approach goals predict academic achievement and when they do not: a social value approach.

PubMed

Dompnier, Benoît; Darnon, Céline; Butera, Fabrizio

2013-09-01

Research on achievement goal promotion at University has shown that performance-approach goals are perceived as a means to succeed at University (high social utility) but are not appreciated (low social desirability). We argue that such a paradox could explain why research has detected that performance-approach goals consistently predict academic grades. First-year psychology students answered a performance-approach goal scale with standard, social desirability and social utility instructions. Participants' grades were recorded at the end of the semester. Results showed that the relationship between performance-approach goals and grades was inhibited by the increase of these goals' social desirability and facilitated by the increase of their social utility, revealing that the predictive validity of performance-approach goals depends on social value. © 2013 The British Psychological Society.

Investigation of goal change to optimize upper-extremity motor performance in a robotic environment.

PubMed

Brewer, Bambi R; Klatzky, Roberta; Markham, Heather; Matsuoka, Yoky

2009-10-01

Robotic devices for therapy have the potential to enable intensive, fully customized home rehabilitation over extended periods for individuals with stroke and traumatic brain injury, thus empowering them to maximize their functional recovery. For robotic rehabilitation to be most effective, systems must have the capacity to assign performance goals to the user and to increment those goals to encourage performance improvement. Otherwise, individuals may plateau at an artificially low level of function. Frequent goal change is needed to motivate improvements in performance by individuals with brain injury; but because of entrenched habits, these individuals may avoid striving for goals that they perceive as becoming ever more difficult. For this reason, implicit, undetectable goal change (distortion) may be more effective than explicit goal change at optimizing the motor performance of some individuals with brain injury. This paper reviews a body of work that provides a basis for incorporating implicit goal change into a robotic rehabilitation paradigm. This work was conducted with individuals without disability to provide foundational knowledge for using goal change in a robotic environment. In addition, we compare motor performance with goal change to performance with no goal or with a static goal for individuals without brain injury. Our results show that goal change can improve motor performance when participants attend to visual feedback. Building on these preliminary results can lead to more effective robotic paradigms for the rehabilitation of individuals with brain injury, including individuals with cerebral palsy.

CALiPER Report 23: Photometric Testing of White Tunable LED Luminaires

DOE Office of Scientific and Technical Information (OSTI.GOV)

None, None

2016-01-01

This report documents an initial investigation of photometric testing procedures for white-tunable LED luminaires and summarizes the key features of those products. Goals of the study include understanding the amount of testing required to characterize a white-tunable product, and documenting the performance of available color-tunable luminaires that are intended for architectural lighting.

The Individuals with Disabilities Education Act: State Achievements, Challenges, and Implications. FPG Snapshot #65

ERIC Educational Resources Information Center

FPG Child Development Institute, 2012

2012-01-01

The goal of Individuals with Disabilities Education Act (IDEA) is no longer simply to make services available to young children with disabilities and their families, but also to ensure that those services lead to enhanced outcomes for participating children and families. To that end, IDEA 2004 requires states to submit State Performance Plans…

Curriculum Development, Refinement and Testing of Performance Indicators for Selected Vocational Programs. Final Report.

ERIC Educational Resources Information Center

Stella, Carolyn Rose

Curriculum materials are provided for 15 vocational programs. Each course is divided into units, for which a lesson plan is provided. The lesson plans vary slightly by course but generally contain these components: unit title, goal and/or objective, content outline, rationale, procedures, a list of required materials, recommended form of…

Southern California Catholic School, Community Praise Web-Based Communication Solution

ERIC Educational Resources Information Center

Lopez, Carol

2005-01-01

The No Child Left Behind Act was signed into law with an aggressive goal of improving the academic performance of all students and eliminating the achievement gap between different races and classes. NCLB also required the U.S. Department of Education (DOE) to make recommendations for a National Education Technology Plan, which was released in…

Aligning the Undergraduate Organic Laboratory Experience with Professional Work: The Centrality of Reliable and Meaningful Data

ERIC Educational Resources Information Center

Alaimo, Peter J.; Langenhan, Joseph M.; Suydam, Ian T.

2014-01-01

Many traditional organic chemistry lab courses do not adequately help students to develop the professional skills required for creative, independent work. The overarching goal of the new organic chemistry lab series at Seattle University is to teach undergraduates to think, perform, and behave more like professional scientists. The conversion of…

Exploring Improvement Science in Education: Promoting College Access in Fresno Unified School District

ERIC Educational Resources Information Center

Aguilar, Jorge; Nayfack, Michelle; Bush-Mecenas, Susan

2017-01-01

California's Local Control Funding Formula (LCFF) requires districts to report multiple measures of student performance that reflect success in the goal of preparing students for college, career, and citizenship. As they engage in the Local Control Accountability Plan (LCAP) process, they are expected to use state and local indicator data from…

Goal-Directed Decision Making with Spiking Neurons.

PubMed

Friedrich, Johannes; Lengyel, Máté

2016-02-03

Behavioral and neuroscientific data on reward-based decision making point to a fundamental distinction between habitual and goal-directed action selection. The formation of habits, which requires simple updating of cached values, has been studied in great detail, and the reward prediction error theory of dopamine function has enjoyed prominent success in accounting for its neural bases. In contrast, the neural circuit mechanisms of goal-directed decision making, requiring extended iterative computations to estimate values online, are still unknown. Here we present a spiking neural network that provably solves the difficult online value estimation problem underlying goal-directed decision making in a near-optimal way and reproduces behavioral as well as neurophysiological experimental data on tasks ranging from simple binary choice to sequential decision making. Our model uses local plasticity rules to learn the synaptic weights of a simple neural network to achieve optimal performance and solves one-step decision-making tasks, commonly considered in neuroeconomics, as well as more challenging sequential decision-making tasks within 1 s. These decision times, and their parametric dependence on task parameters, as well as the final choice probabilities match behavioral data, whereas the evolution of neural activities in the network closely mimics neural responses recorded in frontal cortices during the execution of such tasks. Our theory provides a principled framework to understand the neural underpinning of goal-directed decision making and makes novel predictions for sequential decision-making tasks with multiple rewards. Goal-directed actions requiring prospective planning pervade decision making, but their circuit-level mechanisms remain elusive. We show how a model circuit of biologically realistic spiking neurons can solve this computationally challenging problem in a novel way. The synaptic weights of our network can be learned using local plasticity rules such that its dynamics devise a near-optimal plan of action. By systematically comparing our model results to experimental data, we show that it reproduces behavioral decision times and choice probabilities as well as neural responses in a rich set of tasks. Our results thus offer the first biologically realistic account for complex goal-directed decision making at a computational, algorithmic, and implementational level. Copyright © 2016 the authors 0270-6474/16/361529-18$15.00/0.

Goal-Directed Decision Making with Spiking Neurons

PubMed Central

Lengyel, Máté

2016-01-01

Behavioral and neuroscientific data on reward-based decision making point to a fundamental distinction between habitual and goal-directed action selection. The formation of habits, which requires simple updating of cached values, has been studied in great detail, and the reward prediction error theory of dopamine function has enjoyed prominent success in accounting for its neural bases. In contrast, the neural circuit mechanisms of goal-directed decision making, requiring extended iterative computations to estimate values online, are still unknown. Here we present a spiking neural network that provably solves the difficult online value estimation problem underlying goal-directed decision making in a near-optimal way and reproduces behavioral as well as neurophysiological experimental data on tasks ranging from simple binary choice to sequential decision making. Our model uses local plasticity rules to learn the synaptic weights of a simple neural network to achieve optimal performance and solves one-step decision-making tasks, commonly considered in neuroeconomics, as well as more challenging sequential decision-making tasks within 1 s. These decision times, and their parametric dependence on task parameters, as well as the final choice probabilities match behavioral data, whereas the evolution of neural activities in the network closely mimics neural responses recorded in frontal cortices during the execution of such tasks. Our theory provides a principled framework to understand the neural underpinning of goal-directed decision making and makes novel predictions for sequential decision-making tasks with multiple rewards. SIGNIFICANCE STATEMENT Goal-directed actions requiring prospective planning pervade decision making, but their circuit-level mechanisms remain elusive. We show how a model circuit of biologically realistic spiking neurons can solve this computationally challenging problem in a novel way. The synaptic weights of our network can be learned using local plasticity rules such that its dynamics devise a near-optimal plan of action. By systematically comparing our model results to experimental data, we show that it reproduces behavioral decision times and choice probabilities as well as neural responses in a rich set of tasks. Our results thus offer the first biologically realistic account for complex goal-directed decision making at a computational, algorithmic, and implementational level. PMID:26843636

The impact of goal setting and goal orientation on performance during a clerkship surgical skills training program.

PubMed

Gardner, Aimee K; Diesen, Diana L; Hogg, Deborah; Huerta, Sergio

2016-02-01

The purpose of this study was to integrate relevant goal-setting theory and to identify if trainees' goal orientations have an impact on the assigned goals-performance relationship. Trainees attended 1 of the 3 goal-training activities (do your best, performance, or learning goals) for knot tying (KT) and camera navigation (CN) during the 3rd-year clerkship rotation. Questionnaires and pretests and/or post-tests were completed. One twenty-seven 3rd-year medical students (age: 25 ± 2.6; 54% women) participated in the training program. Pretraining to post-training performance changes were significant for all groups on both tasks (P < .01), but the increase was significantly greater (P < .01) for the learning goals group (do your best: KTΔ = 2.14, CNΔ = 1.69; performance: KTΔ = 2.49, CNΔ = 2.24; learning: KTΔ = 3.04 CNΔ = 2.76). Correlations between goal orientations and improvement were examined, revealing a unique role of goal orientation for performance improvement. These data indicate that consideration of goal type and trainee goal orientation must be considered during curriculum development to maximize educational value. Copyright © 2016 Elsevier Inc. All rights reserved.

Predicting subsequent task performance from goal motivation and goal failure.

PubMed

Healy, Laura C; Ntoumanis, Nikos; Stewart, Brandon D; Duda, Joan L

2015-01-01

Recent research has demonstrated that the cognitive processes associated with goal pursuit can continue to interfere with unrelated tasks when a goal is unfulfilled. Drawing from the self-regulation and goal-striving literatures, the present study explored the impact of goal failure on subsequent cognitive and physical task performance. Furthermore, we examined if the autonomous or controlled motivation underpinning goal striving moderates the responses to goal failure. Athletes (75 male, 59 female, Mage = 19.90 years, SDage = 3.50) completed a cycling trial with the goal of covering a given distance in 8 min. Prior to the trial, their motivation was primed using a video. During the trial they were provided with manipulated performance feedback, thus creating conditions of goal success or failure. No differences emerged in the responses to goal failure between the primed motivation or performance feedback conditions. We make recommendations for future research into how individuals can deal with failure in goal striving.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Haynam, C A; Sacks, R A; Moses, E I

We appreciate Stephen Bodner's continuing interest in the performance of the NIF laser system. However, we find it necessary to disagree with the conclusions he reached in his comments [Appl. Opt. 47, XXX (2008)] on 'National Ignition Facility Laser Performance Status' [Appl. Opt. 46, 3276 (2007)]. In fact, repeated and ongoing tests of the NIF beamlines have demonstrated that NIF can be expected not only to meet or exceed its requirements as established in the mid-1990s in the document National Ignition Facility Functional Requirements and Primary Criteria [Revision 1.3, Report NIF-LLNL-93-058 (1994)], but also to have the flexibility that providesmore » for successfully meeting an ever expanding range of mission goals, including those of ignition.« less

Power processing for electric propulsion

NASA Technical Reports Server (NTRS)

Finke, R. C.; Herron, B. G.; Gant, G. D.

1975-01-01

The inclusion of electric thruster systems in spacecraft design is considered. The propulsion requirements of such spacecraft dictate a wide range of thruster power levels and operational lifetimes, which must be matched by lightweight, efficient, and reliable thruster power processing systems. Electron bombardment ion thruster requirements are presented, and the performance characteristics of present power processing systems are reviewed. Design philosophies and alternatives in areas such as inverter type, arc protection, and control methods are discussed along with future performance potentials for meeting goals in the areas of power process or weight (10 kg/kW), efficiency (approaching 92 percent), reliability (0.96 for 15,000 hr), and thermal control capability (0.3 to 5 AU).

Fiber-Based, Trace-Gas, Laser Transmitter Technology Development for Space

NASA Technical Reports Server (NTRS)

Stephen, Mark; Yu, Anthony; Chen, Jeffrey; Nicholson, Jeffrey; Engin, Doruk; Mathason, Brian; Wu, Stewart; Allan, Graham; Hasselbrack, William; Gonzalez, Brayler;

Fiber-based, trace-gas, laser transmitter technology development for space

NASA Astrophysics Data System (ADS)

Stephen, Mark; Yu, Anthony; Chen, Jeffrey; Nicholson, Jeffrey; Engin, Doruk; Mathason, Brian; Wu, Stewart; Allan, Graham; Hasselbrack, William; Gonzales, Brayler; Han, Lawrence; Numata, Kenji; Storm, Mark; Abshire, James

2015-09-01

NASA's Goddard Space Flight Center (GSFC) is working on maturing the technology readiness of a laser transmitter designed for use in atmospheric CO2 remote-sensing. GSFC has been developing an airplane-based CO2 lidar instrument over several years to demonstrate the efficacy of the instrumentation and measurement technique and to link the science models to the instrument performance. The ultimate goal is to make space-based satellite measurements with global coverage. In order to accomplish this, we must demonstrate the technology readiness and performance of the components as well as demonstrate the required power-scaling to make the link with the required signal-to-noise-ratio (SNR). To date, all the instrument components have been shown to have the required performance with the exception of the laser transmitter. In this program we are working on a fiber-based master oscillator power amplifier (MOPA) laser transmitter architecture where we will develop a ruggedized package and perform the relevant environmental tests to demonstrate TRL-6. In this paper we will review our transmitter architecture and progress on the performance and packaging of the laser transmitter.

Development of stitched/RTM composite primary structures

NASA Technical Reports Server (NTRS)

Kullerd, Susan M.; Dow, Marvin B.

1992-01-01

The goal of the NASA Advanced Composites Technology (ACT) Program is to provide the technology required to gain the full benefit of weight savings and performance offered by composite primary structures. Achieving the goal is dependent on developing composite materials and structures which are damage tolerant and economical to manufacture. Researchers at NASA LaRC and Douglas Aircraft Company are investigating stitching reinforcement combined with resin transfer molding (RTM) to create structures meeting the ACT program goals. The Douglas work is being performed under a NASA contract entitled Innovative Composites Aircraft Primary Structures (ICAPS). The research is aimed at materials, processes and structural concepts for application in both transport wings and fuselages. Empirical guidelines are being established for stitching reinforcement in primary structures. New data are presented in this paper for evaluation tests of thick (90-ply) and thin (16-ply) stitched laminates, and from selection tests of RTM composite resins. Tension strength, compression strength and post-impact compression strength data are reported. Elements of a NASA LaRC program to expand the science base for stitched/RTM composites are discussed.

Advanced Aero-Propulsive Mid-Lift-to-Drag Ratio Entry Vehicle for Future Exploration Missions

NASA Technical Reports Server (NTRS)

Campbell, C. H.; Stosaric, R. R; Cerimele, C. J.; Wong, K. A.; Valle, G. D.; Garcia, J. A.; Melton, J. E.; Munk, M. M.; Blades, E.; Kuruvila, G.;

Examining the effect of goal clarity on faculty performance

NASA Astrophysics Data System (ADS)

Waychal, Pradeep

2018-07-01

Performance of faculty members is the prime factor in the success of any academic organisation and certainly engineering academic organisation. The performance depends on various factors. This study tests our hypothesis, in the context of an Indian engineering college, that goal clarity is one such factor that significantly impacts faculty performance. Our experiment emphasised the importance of goal clarity by screening a relevant movie and by seeking professional goals from the faculty members. After a year, we evaluated the faculty performance using peer evaluation method and triangulated the data with course evaluation by students where faculty member's goal was to be a better teacher, to ensure the trustworthiness of peer evaluation. We found that the performance of faculty, who had goal clarity, was significantly better than the performance of those who did not have goal clarity.

A Next-Generation Parallel File System Environment for the OLCF

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dillow, David A; Fuller, Douglas; Gunasekaran, Raghul

2012-01-01

When deployed in 2008/2009 the Spider system at the Oak Ridge National Laboratory s Leadership Computing Facility (OLCF) was the world s largest scale Lustre parallel file system. Envisioned as a shared parallel file system capable of delivering both the bandwidth and capacity requirements of the OLCF s diverse computational environment, Spider has since become a blueprint for shared Lustre environments deployed worldwide. Designed to support the parallel I/O requirements of the Jaguar XT5 system and other smallerscale platforms at the OLCF, the upgrade to the Titan XK6 heterogeneous system will begin to push the limits of Spider s originalmore » design by mid 2013. With a doubling in total system memory and a 10x increase in FLOPS, Titan will require both higher bandwidth and larger total capacity. Our goal is to provide a 4x increase in total I/O bandwidth from over 240GB=sec today to 1TB=sec and a doubling in total capacity. While aggregate bandwidth and total capacity remain important capabilities, an equally important goal in our efforts is dramatically increasing metadata performance, currently the Achilles heel of parallel file systems at leadership. We present in this paper an analysis of our current I/O workloads, our operational experiences with the Spider parallel file systems, the high-level design of our Spider upgrade, and our efforts in developing benchmarks that synthesize our performance requirements based on our workload characterization studies.« less

High speed civil transport aerodynamic optimization

NASA Technical Reports Server (NTRS)

Ryan, James S.

1994-01-01

This is a report of work in support of the Computational Aerosciences (CAS) element of the Federal HPCC program. Specifically, CFD and aerodynamic optimization are being performed on parallel computers. The long-range goal of this work is to facilitate teraflops-rate multidisciplinary optimization of aerospace vehicles. This year's work is targeted for application to the High Speed Civil Transport (HSCT), one of four CAS grand challenges identified in the HPCC FY 1995 Blue Book. This vehicle is to be a passenger aircraft, with the promise of cutting overseas flight time by more than half. To meet fuel economy, operational costs, environmental impact, noise production, and range requirements, improved design tools are required, and these tools must eventually integrate optimization, external aerodynamics, propulsion, structures, heat transfer, controls, and perhaps other disciplines. The fundamental goal of this project is to contribute to improved design tools for U.S. industry, and thus to the nation's economic competitiveness.

TES: A modular systems approach to expert system development for real-time space applications

NASA Technical Reports Server (NTRS)

Cacace, Ralph; England, Brenda

1988-01-01

A major goal of the Space Station era is to reduce reliance on support from ground based experts. The development of software programs using expert systems technology is one means of reaching this goal without requiring crew members to become intimately familiar with the many complex spacecraft subsystems. Development of an expert systems program requires a validation of the software with actual flight hardware. By combining accurate hardware and software modelling techniques with a modular systems approach to expert systems development, the validation of these software programs can be successfully completed with minimum risk and effort. The TIMES Expert System (TES) is an application that monitors and evaluates real time data to perform fault detection and fault isolation tasks as they would otherwise be carried out by a knowledgeable designer. The development process and primary features of TES, a modular systems approach, and the lessons learned are discussed.

The LSST OCS scheduler design

NASA Astrophysics Data System (ADS)

Delgado, Francisco; Schumacher, German

2014-08-01

The Large Synoptic Survey Telescope (LSST) is a complex system of systems with demanding performance and operational requirements. The nature of its scientific goals requires a special Observatory Control System (OCS) and particularly a very specialized automatic Scheduler. The OCS Scheduler is an autonomous software component that drives the survey, selecting the detailed sequence of visits in real time, taking into account multiple science programs, the current external and internal conditions, and the history of observations. We have developed a SysML model for the OCS Scheduler that fits coherently in the OCS and LSST integrated model. We have also developed a prototype of the Scheduler that implements the scheduling algorithms in the simulation environment provided by the Operations Simulator, where the environment and the observatory are modeled with real weather data and detailed kinematics parameters. This paper expands on the Scheduler architecture and the proposed algorithms to achieve the survey goals.

Technology development for the Advanced Technology Large Aperture Space Telescope (ATLAST) as a candidate large UV-Optical-Infrared (LUVOIR) surveyor

NASA Astrophysics Data System (ADS)

Bolcar, Matthew R.; Balasubramanian, Kunjithapatham; Clampin, Mark; Crooke, Julie; Feinberg, Lee; Postman, Marc; Quijada, Manuel; Rauscher, Bernard; Redding, David; Rioux, Norman; Shaklan, Stuart; Stahl, H. Philip; Stahle, Carl; Thronson, Harley

2015-09-01

The Advanced Technology Large Aperture Space Telescope (ATLAST) team has identified five key technologies to enable candidate architectures for the future large-aperture ultraviolet/optical/infrared (LUVOIR) space observatory envisioned by the NASA Astrophysics 30-year roadmap, Enduring Quests, Daring Visions. The science goals of ATLAST address a broad range of astrophysical questions from early galaxy and star formation to the processes that contributed to the formation of life on Earth, combining general astrophysics with direct-imaging and spectroscopy of habitable exoplanets. The key technologies are: internal coronagraphs, starshades (or external occulters), ultra-stable large-aperture telescopes, detectors, and mirror coatings. Selected technology performance goals include: 1x10-10 raw contrast at an inner working angle of 35 milli-arcseconds, wavefront error stability on the order of 10 pm RMS per wavefront control step, autonomous on-board sensing and control, and zero-read-noise single-photon detectors spanning the exoplanet science bandpass between 400 nm and 1.8 μm. Development of these technologies will provide significant advances over current and planned observatories in terms of sensitivity, angular resolution, stability, and high-contrast imaging. The science goals of ATLAST are presented and flowed down to top-level telescope and instrument performance requirements in the context of a reference architecture: a 10-meter-class, segmented aperture telescope operating at room temperature (~290 K) at the sun-Earth Lagrange-2 point. For each technology area, we define best estimates of required capabilities, current state-of-the-art performance, and current Technology Readiness Level (TRL) - thus identifying the current technology gap. We report on current, planned, or recommended efforts to develop each technology to TRL 5.

Technology Development for the Advanced Technology Large Aperture Space Telescope (ATLAST) as a Candidate Large UV-Optical-Infrared (LUVOIR) Surveyor

NASA Technical Reports Server (NTRS)

Bolcar, Matthew R.; Balasubramanian, Kunjithapatha; Clampin, Mark; Crooke, Julie; Feinberg, Lee; Postman, Marc; Quijada, Manuel; Rauscher, Bernard; Redding, David; Rioux, Norman;

Brain activation related to the perception of minimal agency cues: the role of the mirror system.

PubMed

Stosic, Marina; Brass, Marcel; Van Hoeck, Nicole; Ma, Ning; Van Overwalle, Frank

2014-02-01

Recent fMRI studies indicate that the posterior superior temporal sulcus (pSTS) and the mirror system are involved in analyzing goal-directed actions performed by non-human objects. However, these studies have some limitations: the animations showed moving shapes that resemble humans and human movement, or showed the interaction of two moving shapes rather than one alone. This may have prompted participants to assume a human agent instead of an object. To avoid this potential confound, in this study, animations showed a small circular shape (agent) jumping toward a bigger circular shape (goal) with an obstacle separating them. We manipulated agency of the small circular shape by showing its movements as self-propelled (Agent condition) or as launched by a lever mechanism (Non-agent condition). The small shape succeeded in avoiding an obstacle and reaching the goal object or failed to do so. Our results showed that goal-directed actions performed by an agentic shape recruited the mirror system (the inferior parietal lobe and the premotor cortex) in comparison with shapes that were launched. Success or failure to avoid the obstacle had no effect on these areas. These results complement and further extend previous findings indicating that the mirror system does not appear to be selective for biological actions and their goals, nor does it require the presence of a human, human body parts or human-made objects. Instead, it seems to play a general role in representing goal-directed actions of agents regardless of their form. © 2013.

Essence of Excellence - Lessons from Naval Executives About Superior Performing Tactical and Readiness Staffs.

DTIC Science & Technology

1985-06-01

the organization. 21 7L III. CONSISTENCY -THE INSTRUMENT OF PERFORMANCE "Knowle -dge of our duties is the most essential part of the philosophy of life ...to accomplish them. This means remaining flex- ible under the operation of everyday crisis situ- ations. It requires focusing on what is important...as a way of life . All actions are dominated by a common vision or goal shared throughout the staff. These staffs are innovators, 15 - . t. excellent

State of the NASA Aeropropulsion Discipline Input from the Glenn Research Center

NASA Technical Reports Server (NTRS)

Reddy, D. R.; Schmidt, George

2017-01-01

PROBLEM: Current power turbines are designed for single operating speed, and performance degrades rapidly as power turbine speed decreases. OBJECTIVES: Demonstrate 50 improvement in efficient operational capability using a Variable Speed Power Turbine concept. (Refer to figure lower left, where the goal is to raise efficiency from the current technology line to the green line which represents the AVSPOT VSPT goal.APPROACH: Conduct RD required to advance the technology readiness level of VSPT technology to TRL 4Partner with DoD and leverage DOD AVSPOT contract to share government cost (5050) of contracted efforts to GE and PW for VSPT TRL 45 demonstration.

High Resolution Sub-MM Fiberoptic Endoscope Final Report CRADA No. TSB-1447-97

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stone, Gary F.; Smith, John

2018-01-22

At the time of the CRADA, LLNL needed to develop a sub-mm outer diameter fiberoptic endoscope with 25pm or better resolution at 3-lOmm working distance to support the Enhanced Surveillance Program (ESP) and the Core Surveillance Program for DOE. The commercially available systems did not meet the image resolution requirements and development work was needed to reach three goals. We also needed to perform preliminary investigations into the production of such an endoscope with a steerable-articulated distal end. The goal of such an endoscope was to allow for a 45 degree inspection cone including the lens field of view.

An Operational Computational Terminal Area PBL Prediction System

NASA Technical Reports Server (NTRS)

Lin, Yuh-Lang; Kaplan, Michael L.; Weglarz, Ronald P.; Hamilton, David W.

1997-01-01

There are two fundamental goals of this research project. The first and primary goal is to develop a prognostic system which could satisfy the operational weather prediction requirements of the meteorological subsystem within the Aircraft Vortex Spacing System (AVOSS). The secondary goal is to perform indepth diagnostic analyses of the meteorological conditions affecting the Memphis field experiment held during August 1995. These two goals are interdependent because a thorough understanding of the atmospheric dynamical processes which produced the unique meteorology during the Memphis deployment will help us design a prognostic system for the planetary boundary layer (PBL) which could be utilized to support the meteorological subsystem within AVOSS. The secondary goal occupied much of the first year of the research project. This involved extensive data acquisition and indepth analyses of a spectrum of atmospheric observational data sets. Concerning the primary goal, the first part of the four-stage prognostic system in support of AVOSS entitled: Terminal Area PBL Prediction System (TAPPS) was also formulated and tested in a research environment during 1996. We describe this system, and the three stages which are planned to follow. This first part of a software system designed to meet the primary goal of this research project is relatively inexpensive to implement and run operationally.

Predicting subjective vitality and performance in sports: the role of passion and achievement goals.

PubMed

Li, Chiung-Huang

2010-06-01

The major purpose of this study was to test the hypothesized paths from dualistic passions through achievement goals to subjective vitality and performance in sports. 645 high school athletes participated. The proposed structural equation model, with relationships between dualistic passions and subjective vitality and sports performance mediated by achievement goals, fit the data well, especially for mastery-approach and performance-approach goals. Harmonious and obsessive passions may lead athletes to high performance via the adoption of mastery-approach goals. However, these passions seem to have two paths influencing personal functioning: direct effects make players feel energetic, and indirect effects on subjective vitality through adoption of mastery-approach and performance-approach goals.

Materials and Structures Research for Gas Turbine Applications Within the NASA Subsonic Fixed Wing Project

NASA Technical Reports Server (NTRS)

Hurst, Janet

2011-01-01

A brief overview is presented of the current materials and structures research geared toward propulsion applications for NASA s Subsonic Fixed Wing Project one of four projects within the Fundamental Aeronautics Program of the NASA Aeronautics Research Mission Directorate. The Subsonic Fixed Wing (SFW) Project has selected challenging goals which anticipate an increasing emphasis on aviation s impact upon the global issue of environmental responsibility. These goals are greatly reduced noise, reduced emissions and reduced fuel consumption and address 25 to 30 years of technology development. Successful implementation of these demanding goals will require development of new materials and structural approaches within gas turbine propulsion technology. The Materials and Structures discipline, within the SFW project, comprise cross-cutting technologies ranging from basic investigations to component validation in laboratory environments. Material advances are teamed with innovative designs in a multidisciplinary approach with the resulting technology advances directed to promote the goals of reduced noise and emissions along with improved performance.

Effects of reading goals on reading comprehension, reading rate, and allocation of working memory in children and adolescents with spina bifida meningomyelocele

PubMed Central

ENGLISH, LIANNE; BARNES, MARCIA A.; FLETCHER, JACK M.; DENNIS, MAUREEN; RAGHUBAR, KIMBERLY P.

2011-01-01

Spina bifida meningomyelocele (SBM) is a neurodevelopmental disorder associated with intact word decoding and deficient text and discourse comprehension. This study investigated the ability to adjust reading in accordance with specified reading goals in 79 children and adolescents with SBM (9–19 years of age) and 39 controls (8–17 years of age). Both groups demonstrated slower reading times and enhanced comprehension when reading to study or to come up with a title than when reading for specific information or for entertainment. For both groups, verbal working memory contributed to comprehension performance in those reading conditions hypothesized to require more cognitive effort. Despite their sensitivity to the goals of reading, the group with SBM answered fewer comprehension questions correctly across all reading goal conditions. The results are discussed in relation to the hypothesized cognitive underpinnings of comprehension deficits in SBM and to current models of text comprehension. PMID:20338082

Relations between Classroom Goal Structures and Students' Goal Orientations in Mathematics Classes: When Is a Mastery Goal Structure Adaptive?

ERIC Educational Resources Information Center

Skaalvik, Einar M.; Federici, Roger A.

2016-01-01

The purpose of this study was to test possible interactions between mastery and performance goal structures in mathematics classrooms when predicting students' goal orientations. More specifically, we tested if the degree of performance goal structure moderated the associations between mastery goal structure and students' goal orientations.…

Exploring the repetition bias in voluntary task switching.

PubMed

Mittelstädt, Victor; Dignath, David; Schmidt-Ott, Magdalena; Kiesel, Andrea

2018-01-01

In the voluntary task-switching paradigm, participants are required to randomly select tasks. We reasoned that the consistent finding of a repetition bias (i.e., participants repeat tasks more often than expected by chance) reflects reasonable adaptive task selection behavior to balance the goal of random task selection with the goals to minimize the time and effort for task performance. We conducted two experiments in which participants were provided with variable amount of preview for the non-chosen task stimuli (i.e., potential switch stimuli). We assumed that switch stimuli would initiate some pre-processing resulting in improved performance in switch trials. Results showed that reduced switch costs due to extra-preview in advance of each trial were accompanied by more task switches. This finding is in line with the characteristics of rational adaptive behavior. However, participants were not biased to switch tasks more often than chance despite large switch benefits. We suggest that participants might avoid effortful additional control processes that modulate the effects of preview on task performance and task choice.

Students' Achievement Goals in Relation to Academic Motivation, Competence Expectancy, and Classroom Environment Perceptions

ERIC Educational Resources Information Center

Sungur, Semra; Senler, Burcu

2010-01-01

The present study aimed at investigating elementary students' academic motivation (intrinsic motivation, external regulation, introjected regulation, identified regulation, and amotivation), achievement goals (mastery approach goals, mastery avoidance goals, performance approach goals, performance avoidance goals), competence expectancies, and…

Cyberspace Security Econometrics System (CSES)

DOE Office of Scientific and Technical Information (OSTI.GOV)

2012-07-27

Information security continues to evolve in response to disruptive changes with a persistent focus on information-centric controls and a healthy debate about balancing endpoint and network protection, with a goal of improved enterprise/business risk management. Economic uncertainty, intensively collaborative styles of work, virtualization, increased outsourcing and ongoing complance pressures require careful consideration and adaption. The CSES provides a measure (i.e. a quantitative indication) of reliability, performance, and/or safety of a system that accounts for the criticality of each requirement as a function of one or more stakeholders' interests in that requirement. For a given stakeholder, CSES accounts for the variancemore » that may exist among the stakes one attaches to meeting each requirement.« less

Hong Kong Teacher Education Students' Goal Orientations and Their Relationship to Perceived Parenting Styles

ERIC Educational Resources Information Center

Chan, Kwok-Wai; Chan, Siu-Mui

2007-01-01

The study examined goal orientations, perceived parenting styles, and their relationships in a sample of Hong Kong teacher education students. It was found that students adopted both learning and performance goals but tended to be more performance goal-oriented. Females were more performance goal-oriented than males. As well, students perceived…

Intentionality and "free-will" from a neurodevelopmental perspective.

PubMed

Leisman, Gerry; Machado, Calixto; Melillo, Robert; Mualem, Raed

2012-01-01

The nature of free-will as a subset of intentionality and probabilistic and deterministic function is explored with the indications being that human behavior is highly predictable which in turn, should compromise the notion of free-will. Data supports the notion that age relates to the ability to progressively effectively establish goals performed by fixed action patterns and that these FAPs produce outcomes that in turn modify choices (free-will) for which FAPs need to be employed. Early goals require behaviors that require greater automation in terms of FAPs that lead to goals being achieved or not; if not, then one can change behavior and that in turn is free-will. Goals change with age based on experience which is similar to the way in which movement functions. We hypothesize that human prefrontal cortex development was a natural expansion of the evolutionarily earlier developed areas of the frontal lobe and that goal-directed movements and behavior, including choice and free-will, provided for an expansion of those areas. The same regions of the human central nervous system that were already employed for better control, coordination, and timing of movements, expanded in parallel with the frontal cortex. The initial focus of the frontal lobes was the control of motor activity, but as the movements became more goal-directed, greater cognitive control over movement was necessitated leading to voluntary control of FAPs or free-will. The paper reviews the neurobiology, neurohistology, and electrophysiology of brain connectivities developmentally, along with the development of those brain functions linked to decision-making from a developmental viewpoint. The paper reviews the neurological development of the frontal lobes and inter-regional brain connectivities in the context of optimization of communication systems within the brain and nervous system and its relation to free-will.

A sense of urgency: Evaluating the link between clinical trial development time and the accrual performance of cancer therapy evaluation program (NCI-CTEP) sponsored studies.

PubMed

Cheng, Steven K; Dietrich, Mary S; Dilts, David M

2010-11-15

Postactivation barriers to oncology clinical trial accruals are well documented; however, potential barriers prior to trial opening are not. We investigate one such barrier: trial development time. National Cancer Institute Cancer Therapy Evaluation Program (CTEP)-sponsored trials for all therapeutic, nonpediatric phase I, I/II, II, and III studies activated between 2000 and 2004 were investigated for an 8-year period (n = 419). Successful trials were those achieving 100% of minimum accrual goal. Time to open a study was the calendar time from initial CTEP submission to trial activation. Multivariate logistic regression analysis was used to calculate unadjusted and adjusted odds ratios (OR), controlling for study phase and size of expected accruals. Among the CTEP-approved oncology trials, 37.9% (n = 221) failed to attain the minimum accrual goals, with 70.8% (n = 14) of phase III trials resulting in poor accrual. A total of 16,474 patients (42.5% of accruals) accrued to those studies were unable to achieve the projected minimum accrual goal. Trials requiring less than 12 months of development were significantly more likely to achieve accrual goals (OR, 2.15; 95% confidence interval, 1.29-3.57, P = 0.003) than trials with the median development times of 12 to 18 months. Trials requiring a development time of greater than 24 months were significantly less likely to achieve accrual goals (OR, 0.40; 95% confidence interval, 0.20-0.78; P = 0.011) than trials with the median development time. A large percentage of oncology clinical trials do not achieve minimum projected accruals. Trial development time appears to be one important predictor of the likelihood of successfully achieving the minimum accrual goals. ©2010 AACR.

The effects of a dynamic graphical model during simulation-based training of console operation skill

NASA Technical Reports Server (NTRS)

Farquhar, John D.; Regian, J. Wesley

1993-01-01

LOADER is a Windows-based simulation of a complex procedural task. The task requires subjects to execute long sequences of console-operation actions (e.g., button presses, switch actuations, dial rotations) to accomplish specific goals. The LOADER interface is a graphical computer-simulated console which controls railroad cars, tracks, and cranes in a fictitious railroad yard. We hypothesized that acquisition of LOADER performance skill would be supported by the representation of a dynamic graphical model linking console actions to goal and goal states in the 'railroad yard'. Twenty-nine subjects were randomly assigned to one of two treatments (i.e., dynamic model or no model). During training, both groups received identical text-based instruction in an instructional-window above the LOADER interface. One group, however, additionally saw a dynamic version of the bird's-eye view of the railroad yard. After training, both groups were tested under identical conditions. They were asked to perform the complete procedure without guidance and without access to either type of railroad yard representation. Results indicate that rather than becoming dependent on the animated rail yard model, subjects in the dynamic model condition apparently internalized the model, as evidenced by their performance after the model was removed.

Way Forward for High Performance Payload Processing Development

NASA Astrophysics Data System (ADS)

Notebaert, Olivier; Franklin, John; Lefftz, Vincent; Moreno, Jose; Patte, Mathieu; Syed, Mohsin; Wagner, Arnaud

2012-08-01

Payload processing is facing technological challenges due to the large increase of performance requirements of future scientific, observation and telecom missions as well as the future instruments technologies capturing much larger amount of data. For several years, with the perspective of higher performance together with the planned obsolescence of solutions covering the current needs, ESA and the European space industry has been developing several technology solutions. Silicon technologies, radiation mitigation techniques and innovative functional architectures are developed with the goal of designing future space qualified processing devices with a much higher level of performance than today. The fast growing commercial market application have developed very attractive technologies but which are not fully suitable with respect to their tolerance to space environment. Without the financial capacity to explore and develop all possible technology paths, a specific and global approach is required to cover the future mission needs and their necessary performance targets with effectiveness.The next sections describe main issues and priorities and provides further detailed relevant for this approach covering the high performance processing technology.

Cognition and procedure representational requirements for predictive human performance models

NASA Technical Reports Server (NTRS)

Corker, K.

1992-01-01

Models and modeling environments for human performance are becoming significant contributors to early system design and analysis procedures. Issues of levels of automation, physical environment, informational environment, and manning requirements are being addressed by such man/machine analysis systems. The research reported here investigates the close interaction between models of human cognition and models that described procedural performance. We describe a methodology for the decomposition of aircrew procedures that supports interaction with models of cognition on the basis of procedures observed; that serves to identify cockpit/avionics information sources and crew information requirements; and that provides the structure to support methods for function allocation among crew and aiding systems. Our approach is to develop an object-oriented, modular, executable software representation of the aircrew, the aircraft, and the procedures necessary to satisfy flight-phase goals. We then encode in a time-based language, taxonomies of the conceptual, relational, and procedural constraints among the cockpit avionics and control system and the aircrew. We have designed and implemented a goals/procedures hierarchic representation sufficient to describe procedural flow in the cockpit. We then execute the procedural representation in simulation software and calculate the values of the flight instruments, aircraft state variables and crew resources using the constraints available from the relationship taxonomies. The system provides a flexible, extensible, manipulative and executable representation of aircrew and procedures that is generally applicable to crew/procedure task-analysis. The representation supports developed methods of intent inference, and is extensible to include issues of information requirements and functional allocation. We are attempting to link the procedural representation to models of cognitive functions to establish several intent inference methods including procedural backtracking with concurrent search, temporal reasoning, and constraint checking for partial ordering of procedures. Finally, the representation is being linked to models of human decision making processes that include heuristic, propositional and prescriptive judgement models that are sensitive to the procedural content in which the valuative functions are being performed.

Achievement goals, self-handicapping, and performance: a 2 x 2 achievement goal perspective.

PubMed

Ntoumanis, Nikos; Thøgersen-Ntoumani, Cecilie; Smith, Alison L

2009-11-01

Elliot and colleagues (2006) examined the effects of experimentally induced achievement goals, proposed by the trichotomous model, on self-handicapping and performance in physical education. Our study replicated and extended the work of Elliot et al. by experimentally promoting all four goals proposed by the 2 x 2 model (Elliot & McGregor, 2001), measuring the participants' own situational achievement goals, using a relatively novel task, and testing the participants in a group setting. We used a randomized experimental design with four conditions that aimed to induce one of the four goals advanced by the 2 x 2 model. The participants (n = 138) were undergraduates who engaged in a dart-throwing task. The results pertaining to self-handicapping partly replicated Elliot and colleagues' findings by showing that experimentally promoted performance-avoidance goals resulted in less practice. In contrast, the promotion of mastery-avoidance goals did not result in less practice compared with either of the approach goals. Dart-throwing performance did not differ among the four goal conditions. Personal achievement goals did not moderate the effects of experimentally induced goals on self-handicapping and performance. The extent to which mastery-avoidance goals are maladaptive is discussed, as well as the interplay between personal and experimentally induced goals.

Self-Esteem, Achievement Goals, and Self-Handicapping in College Physical Education.

PubMed

Chen, Zuosong; Sun, Kaihong; Wang, Kun

2017-01-01

This study aims to investigate the relationships among self-esteem, achievement goals, and self-handicapping and the potential mediating role of achievement goals in the relationship between self-esteem and self-handicapping in college physical education. The participants were 320 Chinese college students. Three validated scales were employed to assess participants' self-esteem, achievement goals, and self-handicapping in college physical education. Results showed that self-esteem had a negative effect on self-handicapping. Self-esteem had a positive effect on mastery goals, but had a negative effect on performance-avoidance goals. Mastery goals had a negative effect and performance-avoidance goals had a positive effect on self-handicapping. Moreover, mastery goals and performance-avoidance goals partially mediated the relationship between self-esteem and self-handicapping, and self-esteem had both direct and indirect effects on self-handicapping in college physical education. The findings indicate that improving individual's self-esteem and promoting mastery goals while reducing performance-avoidance goals may be relevant strategies to reduce self-handicapping in college physical education.

Preface to RIGiM 2009

NASA Astrophysics Data System (ADS)

Rolland, Colette; Yu, Eric; Salinesi, Camille; Castro, Jaelson

The use of intentional concepts, the notion of "goal" in particular, has been prominent in recent approaches to requirement engineering (RE). Goal-oriented frameworks and methods for requirements engineering (GORE) have been keynote topics in requirements engineering, conceptual modelling, and more generally in software engineering. What are the conceptual modelling foundations in these approaches? RIGiM (Requirements Intentions and Goals in Conceptual Modelling) aims to provide a forum for discussing the interplay between requirements engineering and conceptual modelling, and in particular, to investigate how goal- and intention-driven approaches help in conceptualising purposeful systems. What are the fundamental objectives and premises of requirements engineering and conceptual modelling respectively, and how can they complement each other? What are the demands on conceptual modelling from the standpoint of requirements engineering? What conceptual modelling techniques can be further taken advantage of in requirements engineering? What are the upcoming modelling challenges and issues in GORE? What are the unresolved open questions? What lessons are there to be learnt from industrial experiences? What empirical data are there to support the cost-benefit analysis when adopting GORE methods? Are there application domains or types of project settings for which goals and intentional approaches are particularly suitable or not suitable? What degree of formalization and automation, or interactivity is feasible and appropriate for what types of participants during requirements engineering?

Automation and robotics technology for intelligent mining systems

NASA Technical Reports Server (NTRS)

Welsh, Jeffrey H.

1989-01-01

The U.S. Bureau of Mines is approaching the problems of accidents and efficiency in the mining industry through the application of automation and robotics to mining systems. This technology can increase safety by removing workers from hazardous areas of the mines or from performing hazardous tasks. The short-term goal of the Automation and Robotics program is to develop technology that can be implemented in the form of an autonomous mining machine using current continuous mining machine equipment. In the longer term, the goal is to conduct research that will lead to new intelligent mining systems that capitalize on the capabilities of robotics. The Bureau of Mines Automation and Robotics program has been structured to produce the technology required for the short- and long-term goals. The short-term goal of application of automation and robotics to an existing mining machine, resulting in autonomous operation, is expected to be accomplished within five years. Key technology elements required for an autonomous continuous mining machine are well underway and include machine navigation systems, coal-rock interface detectors, machine condition monitoring, and intelligent computer systems. The Bureau of Mines program is described, including status of key technology elements for an autonomous continuous mining machine, the program schedule, and future work. Although the program is directed toward underground mining, much of the technology being developed may have applications for space systems or mining on the Moon or other planets.

The Stellar Imager (SI)"Vision Mission"

NASA Technical Reports Server (NTRS)

Carpenter, Ken; Danchi, W.; Leitner, J.; Liu, A.; Lyon, R.; Mazzuca, L.; Moe, R.; Chenette, D.; Karovska, M.; Allen, R.

2004-01-01

The Stellar Imager (SI) is a "Vision" mission in the Sun-Earth Connection (SEC) Roadmap, conceived for the purpose of understanding the effects of stellar magnetic fields, the dynamos that generate them, and the internal structure and dynamics of the stars in which they exist. The ultimate goal is to achieve the best possible forecasting of solar/stellar magnetic activity and its impact on life in the Universe. The science goals of SI require an ultra-high angular resolution, at ultraviolet wavelengths, on the order of 100 micro-arcsec and thus baselines on the order of 0.5 km. These requirements call for a large, multi-spacecraft (less than 20) imaging interferometer, utilizing precision formation flying in a stable environment, such as in a Lissajous orbit around the Sun-Earth L2 point. SI's resolution will make it an invaluable resource for many other areas of astrophysics, including studies of AGN s, supernovae, cataclysmic variables, young stellar objects, QSO's, and stellar black holes. ongoing mission concept and technology development studies for SI. These studies are designed to refine the mission requirements for the science goals, define a Design Reference Mission, perform trade studies of selected major technical and architectural issues, improve the existing technology roadmap, and explore the details of deployment and operations, as well as the possible roles of astronauts and/or robots in construction and servicing of the facility.

Underprepared Students' Performance on Algebra in a Double-Period High School Mathematics Program

ERIC Educational Resources Information Center

Martinez, Mara V.; Bragelman, John; Stoelinga, Timothy

2016-01-01

The primary goal of the Intensified Algebra I (IA) program is to enable mathematically underprepared students to successfully complete Algebra I in 9th grade and stay on track to meet increasingly rigorous high school mathematics graduation requirements. The program was designed to bring a range of both cognitive and non-cognitive supports to bear…

Is your organization project management savvy?

PubMed

Wolff, Pam

2003-01-01

As corporations struggle to gain better control and use of organizational resources in a rapidly changing business environment, they're finding that project management is an efficacious discipline for supporting strategic initiatives and achieving business goals. Successful project management requires an understanding of the business drivers, the organizational structure, the benefits of centralizing project management, and the factors that could impact performance.

Status of advanced fuel candidates for Sodium Fast Reactor within the Generation IV International Forum

DOE Office of Scientific and Technical Information (OSTI.GOV)

F. Delage; J. Carmack; C. B. Lee

2013-10-01

The main challenge for fuels for future Sodium Fast Reactor systems is the development and qualification of a nuclear fuel sub-assembly which meets the Generation IV International Forum goals. The Advanced Fuel project investigates high burn-up minor actinide bearing fuels as well as claddings and wrappers to withstand high neutron doses and temperatures. The R&D outcome of national and collaborative programs has been collected and shared between the AF project members in order to review the capability of sub-assembly material and fuel candidates, to identify the issues and select the viable options. Based on historical experience and knowledge, both oxidemore » and metal fuels emerge as primary options to meet the performance and the reliability goals of Generation IV SFR systems. There is a significant positive experience on carbide fuels but major issues remain to be overcome: strong in-pile swelling, atmosphere required for fabrication as well as Pu and Am losses. The irradiation performance database for nitride fuels is limited with longer term R&D activities still required. The promising core material candidates are Ferritic/Martensitic (F/M) and Oxide Dispersed Strengthened (ODS) steels.« less

Skill qualifications in pediatric minimally invasive surgery.

PubMed

Iwanaka, Tadashi; Morikawa, Yasuhide; Yamataka, Atsuyuki; Nio, Masaki; Segawa, Osamu; Kawashima, Hiroshi; Sato, Masahito; Terakura, Hirotsugu; Take, Hiroshi; Hirose, Ryuichiro; Yagi, Makoto

2011-07-01

In 2006, The Japanese Society of Pediatric Endoscopic Surgeons devised a plan to develop a pediatric endoscopic surgical skill qualification (ESSQ) system. This system is controlled by The Japan Society for Endoscopic Surgery. The standard requirement for skills qualification is the ability of each applicant to complete common types of laparoscopic surgery. The main goal of the system is to decrease complications of laparoscopic surgery by evaluating the surgical skills of each applicant and subsequently certify surgeons with adequate skills to perform laparoscopic operations safely. A committee of pediatric ESSQ created a checklist to assess the applicant's laparoscopic surgical skills. Skills are assessed in a double-blinded fashion by evaluating an unedited video recording of a fundoplication for pediatric gastroesophageal reflux disease. The initial pediatric ESSQ system was started in 2008. In 2008 and 2009, respectively, 9 out of 17 (53%) and 6 out of 12 (50%) applicants were certified as expert pediatric laparoscopic surgeons. Our ultimate goal is to provide safe and appropriate pediatric minimally invasive procedures and to avoid severe complications. To prove the predictive validity of this system, a survey of the outcomes of operations performed by certified pediatric surgeons is required.

Teacher performance goal practices and elementary students’ behavioral engagement: A developmental perspective

PubMed Central

Hughes, Jan N.; Wu, Wei; West, Stephen G.

2010-01-01

We investigated growth trajectories for classroom performance goal practices and for student behavioral engagement across grades 2 to 5 for 497 academically at-risk elementary students. This study is the first longitudinal investigation of performance goal practices in the early elementary years. On average, teacher use of performance goal practices increased and students’ behavioral engagement declined across the four years. Using autoregressive latent trajectory (ALT) models, we examined the synchronous relations between teacher-reported performance goal practices and teacher-reported student behavioral engagement. As expected, as students move into classrooms with a new teacher with less emphasis on performance goal practices, they become more behaviorally engaged in school. Gender did not moderate these results. Implications for teacher professional development are discussed. PMID:21215834

Cost/Effort Drivers and Decision Analysis

NASA Technical Reports Server (NTRS)

Seidel, Jonathan

2010-01-01

Engineering trade study analyses demand consideration of performance, cost and schedule impacts across the spectrum of alternative concepts and in direct reference to product requirements. Prior to detailed design, requirements are too often ill-defined (only goals ) and prone to creep, extending well beyond the Systems Requirements Review. Though lack of engineering design and definitive requirements inhibit the ability to perform detailed cost analyses, affordability trades still comprise the foundation of these future product decisions and must evolve in concert. This presentation excerpts results of the recent NASA subsonic Engine Concept Study for an Advanced Single Aisle Transport to demonstrate an affordability evaluation of performance characteristics and the subsequent impacts on engine architecture decisions. Applying the Process Based Economic Analysis Tool (PBEAT), development cost, production cost, as well as operation and support costs were considered in a traditional weighted ranking of the following system-level figures of merit: mission fuel burn, take-off noise, NOx emissions, and cruise speed. Weighting factors were varied to ascertain the architecture ranking sensitivities to these performance figures of merit with companion cost considerations. A more detailed examination of supersonic variable cycle engine cost is also briefly presented, with observations and recommendations for further refinements.

Redundancy management of inertial systems.

NASA Technical Reports Server (NTRS)

Mckern, R. A.; Musoff, H.

1973-01-01

The paper reviews developments in failure detection and isolation techniques applicable to gimballed and strapdown systems. It examines basic redundancy management goals of improved reliability, performance and logistic costs, and explores mechanizations available for both input and output data handling. The meaning of redundant system reliability in terms of available coverage, system MTBF, and mission time is presented and the practical hardware performance limitations of failure detection and isolation techniques are explored. Simulation results are presented illustrating implementation coverages attainable considering IMU performance models and mission detection threshold requirements. The implications of a complete GN&C redundancy management method on inertial techniques are also explored.

First scientific application of the membrane cryostat technology

DOE Office of Scientific and Technical Information (OSTI.GOV)

Montanari, David; Adamowski, Mark; Baller, Bruce R.

2014-01-29

We report on the design, fabrication, performance and commissioning of the first membrane cryostat to be used for scientific application. The Long Baseline Neutrino Experiment (LBNE) has designed and fabricated a membrane cryostat prototype in collaboration with IHI Corporation (IHI). Original goals of the prototype are: to demonstrate the membrane cryostat technology in terms of thermal performance, feasibility for liquid argon, and leak tightness; to demonstrate that we can remove all the impurities from the vessel and achieve the purity requirements in a membrane cryostat without evacuation and using only a controlled gaseous argon purge; to demonstrate that we canmore » achieve and maintain the purity requirements of the liquid argon during filling, purification, and maintenance mode using mole sieve and copper filters from the Liquid Argon Purity Demonstrator (LAPD) R and D project. The purity requirements of a large liquid argon detector such as LBNE are contaminants below 200 parts per trillion oxygen equivalent. This paper gives the requirements, design, construction, and performance of the LBNE membrane cryostat prototype, with experience and results important to the development of the LBNE detector.« less

Formation Flying and the Stellar Imager Mission Concept

NASA Technical Reports Server (NTRS)

Carpenter, Kenneth G.

2003-01-01

The Stellar Imager (SI) is envisioned as a space-based, W-optical interferometer composed of 10 or more one-meter class elements distributed with a maximum baseline of 0.5 km. image stars and binaries with sufficient resolution to enable long-term studies of stellar magnetic activity patterns, for comparison with those on the sun. It will also support asteroseismology (acoustic imaging) to probe stellar internal structure, differential rotation, and large-scale circulations. SI will enable us to understand the various effects of the magnetic fields of stars, the dynamos that generate these fields, and the internal structure and dynamics of the stars. The ultimate goal of the mission is to achieve the best-possible forecasting of solar activity as a driver of climate and space weather on time scales ranging from months up to decades, and an understanding of the impact of stellar magnetic activity on life in the Universe. In this paper we briefly describe the scientific goals of the mission, the performance requirements needed to address these goals, and the "enabling technology" development efforts required, with specific attention for this meeting to the formation-flying aspects. It is designed to

Waste Isolation Pilot Plant Annual Site Environmental Report for 2014. Emended

DOE Office of Scientific and Technical Information (OSTI.GOV)

none,

2015-09-01

The purpose of the Waste Isolation Pilot Plant (WIPP) Annual Site Environmental Report for 2014 (ASER) is to provide information required by U.S. Department of Energy (DOE) Order 231.1B, Environment, Safety, and Health Reporting. Specifically, the ASER presents summary environmental data to: Characterize site environmental management performance; Summarize environmental occurrences and responses reported during the calendar year (CY); Confirm compliance with environmental standards and requirements; Highlight significant environmental accomplishments, including progress toward the DOE environmental sustainability goals made through implementation of the WIPP Environmental Management System (EMS).

Extending enterprise architecture modelling with business goals and requirements

NASA Astrophysics Data System (ADS)

Engelsman, Wilco; Quartel, Dick; Jonkers, Henk; van Sinderen, Marten

2011-02-01

The methods for enterprise architecture (EA), such as The Open Group Architecture Framework, acknowledge the importance of requirements modelling in the development of EAs. Modelling support is needed to specify, document, communicate and reason about goals and requirements. The current modelling techniques for EA focus on the products, services, processes and applications of an enterprise. In addition, techniques may be provided to describe structured requirements lists and use cases. Little support is available however for modelling the underlying motivation of EAs in terms of stakeholder concerns and the high-level goals that address these concerns. This article describes a language that supports the modelling of this motivation. The definition of the language is based on existing work on high-level goal and requirements modelling and is aligned with an existing standard for enterprise modelling: the ArchiMate language. Furthermore, the article illustrates how EA can benefit from analysis techniques from the requirements engineering domain.

Deep UV to NIR Space Telescopes and Exoplanet Coronagraphs: A Trade Study on Throughput, Polarization, Mirror Coating Options and Requirements

NASA Technical Reports Server (NTRS)

Balasubramanian, Kunjithapatham; Shaklan, Stuart; Give'on, Amir; Cady, Eric; Marchen, Luis

2011-01-01

The NASA Exoplanet program and the Cosmic Origins program are exploring technical options to combine the visible to NIR performance requirements of a space coronagraph with the general astrophysics requirements of a space telescope covering the deep UV spectrum. Are there compatible options in terms of mirror coatings and telescope architecture to satisfy both goals? In this paper, we address some of the main concerns, particularly relating to polarization in the visible and throughput in the UV. Telescope architectures employing different coating options compatible with current technology are considered in this trade study.

Key Performance Parameter Driven Technology Goals for Electric Machines and Power Systems

NASA Technical Reports Server (NTRS)

Bowman, Cheryl; Jansen, Ralph; Brown, Gerald; Duffy, Kirsten; Trudell, Jeffrey

2015-01-01

Transitioning aviation to low carbon propulsion is one of the crucial strategic research thrust and is a driver in the search for alternative propulsion system for advanced aircraft configurations. This work requires multidisciplinary skills coming from multiple entities. The feasibility of scaling up various electric drive system technologies to meet the requirements of a large commercial transport is discussed in terms of key parameters. Functional requirements are identified that impact the power system design. A breakeven analysis is presented to find the minimum allowable electric drive specific power and efficiency that can preserve the range, initial weight, operating empty weight, and payload weight of the base aircraft.

Space Telecommunications Radio System (STRS) Architecture Goals/Objectives and Level 1 Requirements

NASA Technical Reports Server (NTRS)

Briones, Janette C.; Johnson, Sandra K.; VanDerAar, Lisa

2007-01-01

The Space Telecommunications Radio System (STRS) Architecture Requirements Document provides the basis for the development of an open architecture for NASA Software Defined Radios (SDRs) for space use. The main objective of this document is to evaluate the goals and objectives and high level (Level 1) requirements that have bearing on the design of the architecture. The goals and objectives will provide broad, fundamental direction and purpose. The high level requirements (Level 1) intend to guide the broader and longer term aspects aspects of the SDR Architecture and provide guidance for the development of level 2 requirements.

Training evaluation final report

NASA Technical Reports Server (NTRS)

Sepulveda, Jose A.

1992-01-01

In the area of management training, 'evaluation' refers both to the specific evaluation instrument used to determine whether a training effort was considered effective, and to the procedures followed to evaluate specific training requests. This report recommends to evaluate new training requests in the same way new procurement or new projects are evaluated. This includes examining training requests from the perspective of KSC goals and objectives, and determining expected ROI of proposed training program (does training result in improved productivity, through savings of time, improved outputs, and/or personnel reduction?). To determine whether a specific training course is effective, a statement of what constitutes 'good performance' is required. The user (NOT the Training Branch) must define what is 'required level of performance'. This 'model' will be the basis for the design and development of an objective, performance-based, training evaluation instrument.

Two-tiered design analysis of a radiator for a solar dynamic powered Stirling engine

NASA Technical Reports Server (NTRS)

Hainley, Donald C.

1989-01-01

Two separate design approaches for a pumped loop radiator used to transfer heat from the cold end of a solar dynamic powered Stirling engine are described. The first approach uses a standard method to determine radiator requirements to meet specified end of mission conditions. Trade-off studies conducted for the analysis are included. Justification of this concept within the specified parameters of the analysis is provided. The second design approach determines the life performance of the radiator/Stirling system. In this approach, the system performance was altered by reducing the radiator heat transfer area. Performance effects and equilibrium points were determined as radiator segments were removed. This simulates the effect of loss of radiator sections due to micro-meteoroid and space debris penetration. The two designs were compared on the basis of overall system requirements and goals.

Two-tiered design analysis of a radiator for a solar dynamic powered Stirling engine

NASA Technical Reports Server (NTRS)

Hainley, Donald C.

1989-01-01

Two separate design approaches for a pumped loop radiator used to transfer heat from the cold end of a solar dynamic powered Stirling engine are described. The first approach uses a standard method to determine radiator requirements to meet specified end of mission conditions. Trade-off studies conducted for the analysis are included. Justification of this concept within the specified parameters of the analysis is provided. The second design approach determines the life performance of the radiator/Stirling system. In this approach, the system performance was altered by reducing the radiator heat transfer area. Performance effects and equilibrium points were determined as radiator segments were removed. This simulates the effect of loss of radiator sections due to micro-meteoroid and space debris penetration. The two designs are compared on the basis of overall system requirements and goals.

Goal neglect and knowledge chunking in the construction of novel behaviour.

PubMed

Bhandari, Apoorva; Duncan, John

2014-01-01

Task complexity is critical in cognitive efficiency and fluid intelligence. To examine functional limits in task complexity, we examine the phenomenon of goal neglect, where participants with low fluid intelligence fail to follow task rules that they otherwise understand. Though neglect is known to increase with task complexity, here we show that - in contrast to previous accounts - the critical factor is not the total complexity of all task rules. Instead, when the space of task requirements can be divided into separate sub-parts, neglect is controlled by the complexity of each component part. The data also show that neglect develops and stabilizes over the first few performance trials, i.e. as instructions are first used to generate behaviour. In all complex behaviour, a critical process is combination of task events with retrieved task requirements to create focused attentional episodes dealing with each decision in turn. In large part, we suggest, fluid intelligence may reflect this process of converting complex requirements into effective attentional episodes. Copyright © 2013 The Authors. Published by Elsevier B.V. All rights reserved.

Linking Goal-Oriented Requirements and Model-Driven Development

NASA Astrophysics Data System (ADS)

Pastor, Oscar; Giachetti, Giovanni

In the context of Goal-Oriented Requirement Engineering (GORE) there are interesting modeling approaches for the analysis of complex scenarios that are oriented to obtain and represent the relevant requirements for the development of software products. However, the way to use these GORE models in an automated Model-Driven Development (MDD) process is not clear, and, in general terms, the translation of these models into the final software products is still manually performed. Therefore, in this chapter, we show an approach to automatically link GORE models and MDD processes, which has been elaborated by considering the experience obtained from linking the i * framework with an industrially applied MDD approach. The linking approach proposed is formulated by means of a generic process that is based on current modeling standards and technologies in order to facilitate its application for different MDD and GORE approaches. Special attention is paid to how this process generates appropriate model transformation mechanisms to automatically obtain MDD conceptual models from GORE models, and how it can be used to specify validation mechanisms to assure the correct model transformations.

Energy Efficient Engine Flight Propulsion System Preliminary Analysis and Design Report

NASA Technical Reports Server (NTRS)

Bisset, J. W.; Howe, D. C.

1983-01-01

The final design and analysis of the flight propulsion system is presented. This system is the conceptual study engine defined to meet the performance, economic and environmental goals established for the Energy Efficient Engine Program. The design effort included a final definition of the engine, major components, internal subsystems, and nacelle. Various analytical representations and results from component technology programs are used to verify aerodynamic and structural design concepts and to predict performance. Specific design goals and specifications, reflecting future commercial aircraft propulsion system requirements for the mid-1980's, are detailed by NASA and used as guidelines during engine definition. Information is also included which details salient results from a separate study to define a turbofan propulsion system, known as the maximum efficiency engine, which reoptimized the advanced fuel saving technologies for improved fuel economy and direct operating costs relative to the flight propulsion system.

The caBIG® Life Science Business Architecture Model.

PubMed

Boyd, Lauren Becnel; Hunicke-Smith, Scott P; Stafford, Grace A; Freund, Elaine T; Ehlman, Michele; Chandran, Uma; Dennis, Robert; Fernandez, Anna T; Goldstein, Stephen; Steffen, David; Tycko, Benjamin; Klemm, Juli D

2011-05-15

Business Architecture Models (BAMs) describe what a business does, who performs the activities, where and when activities are performed, how activities are accomplished and which data are present. The purpose of a BAM is to provide a common resource for understanding business functions and requirements and to guide software development. The cancer Biomedical Informatics Grid (caBIG®) Life Science BAM (LS BAM) provides a shared understanding of the vocabulary, goals and processes that are common in the business of LS research. LS BAM 1.1 includes 90 goals and 61 people and groups within Use Case and Activity Unified Modeling Language (UML) Diagrams. Here we report on the model's current release, LS BAM 1.1, its utility and usage, and plans for future use and continuing development for future releases. The LS BAM is freely available as UML, PDF and HTML (https://wiki.nci.nih.gov/x/OFNyAQ).

Goal-setting, self-efficacy, and memory performance in older and younger adults.

PubMed

West, R L; Thorn, R M

2001-01-01

Research in field and laboratory settings has shown that goals lead to improved self-efficacy and performance, especially when individuals also receive positive feedback. The present study extended goal-setting theory to examine self-set goals and feedback in relation to younger and older adults' memory performance and self-efficacy. Following a baseline recall trial, participants completed three shopping list recall trials. Half of the participants were instructed to set goals for the three experimental trials, and half in each goal condition received performance feedback after each trial. Young adults' self-efficacy, clustering, and recall exceeded that of older adults. Goal setting increased self-efficacy for younger but not older adults, and it did not affect performance. Younger adults and participants in the feedback condition increased their goals across trials, as did participants for whom feedback indicated success. These data provide a first look at the motivational impact of feedback and self-set recall goals in memory aging. Additional study is needed to understand the interactive effects of type of feedback, memory task difficulty, and type of goal setting at different ages.

Achievement Goals in a Presentation Task: Performance Expectancy, Achievement Goals, State Anxiety, and Task Performance

ERIC Educational Resources Information Center

Tanaka, Ayumi; Takehara, Takuma; Yamauchi, Hirotsugu

2006-01-01

The aims of the study were to test the linkages between achievement goals to task performance, as mediated by state anxiety arousal. Performance expectancy was also examined as antecedents of achievement goals. A presentation task in a computer practice class was used as achievement task. Fifty-three undergraduates (37 females and 16 males) were…

Training model for laparoscopic Heller and Dor fundoplication: a tool for laparoscopic skills training and assessment-construct validity using the GOALS score.

PubMed

Bellorin, Omar; Kundel, Anna; Sharma, Saurabh; Ramirez-Valderrama, Alexander; Lee, Paul

2016-08-01

Laparoscopic training demands practice. The transfer of laparoscopic skills from training models to real surgical procedures has been proven. The global operative assessment of laparoscopic skills (GOALS) score is a 5-item global rating scale developed to evaluate laparoscopic skills by direct observation. This scale has been used to demonstrate construct validity of several laparoscopic training models. Here, we present a low-cost model of laparoscopic Heller-Dor for advanced laparoscopic training. The aim of this study was to determine the capability of a training model for laparoscopic Heller-Dor to discriminate between different levels of laparoscopic expertise. The performance of two groups with different levels of expertise, novices (<30 laparoscopic procedures PGY1-2) and experts (>300 laparoscopic procedures PGY4-5) was assessed. All participants were instructed to perform two tasks (esophageal myotomy and fundoplication). All the performances were recorded in a digital format. A laparoscopic expert who was blinded to subject's identity evaluated the recordings using the GOALS score. Autonomy, one of the five items of GOALS, was removed since the evaluator and the trainee did not have interaction. The time required to finish each task was also recorded. Performance was compared using the Mann-Whitney U test (p < 0.05 was significant). Twenty subjects were evaluated: ten in each group, using the GOALS score. The mean total GOALS score for novices was 7.5 points (SD: 1.64) and 13.9 points (SD: 1.66) for experts (p < 0.05).The expert group was superior in each domain of the GOALS score compared to novices: depth perception (mean: 3.3 vs 2 p < 0.05), bimanual dexterity (mean 3.4 vs 2.1 p < 0.05), efficiency (mean 3.4 vs 1.7 p < 0.05) and tissue handling (mean 3.6 vs 1.7 p < 0.05). With regard to time, experts were superior in task 1 (mean 9.7 vs 14.9 min p < 0.05) and task 2 (mean 24 vs 47.1 min p < 0.05) compared to novices. The laparoscopic Heller-Dor training model has construct validity. The model may be used as a tool for training of the surgical resident.

Functional performance of pyrovalves

NASA Technical Reports Server (NTRS)

Bement, Laurence J.

1996-01-01

Following several flight and ground test failures of spacecraft systems using single-shot, 'normally closed' pyrotechnically actuated valves (pyrovalves), a Government/Industry cooperative program was initiated to assess the functional performance of five qualified designs. The goal of the program was to provide information on functional performance of pyrovalves to allow users the opportunity to improve procurement requirements. Specific objectives included the demonstration of performance test methods, the seating; these gases/particles entered the fluid path of measurement of 'blowby' (the passage of gases from the pyrotechnic energy source around the activating piston into the valve's fluid path), and the quantification of functional margins for each design. Experiments were conducted at NASA's Langley Research Center on several units for each of the five valve designs. The test methods used for this program measured the forces and energies required to actuate the valves, as well as the energies and the pressures (where possible) delivered by the pyrotechnic sources. Functional performance ranged widely among the designs. Blowby cannot be prevented by o-ring seals; metal-to-metal seals were effective. Functional margin was determined by dividing the energy delivered by the pyrotechnic sources in excess to that required to accomplish the function by the energy required for that function. Two of the five designs had inadequate functional margins with the pyrotechnic cartridges evaluated.

Prediction of intrinsic motivation and sports performance using 2 x 2 achievement goal framework.

PubMed

Li, Chiung-Huang; Chi, Likang; Yeh, Suh-Ruu; Guo, Kwei-Bin; Ou, Cheng-Tsung; Kao, Chun-Chieh

2011-04-01

The purpose of this study was to examine the influence of 2 x 2 achievement goals on intrinsic motivation and performance in handball. Participants were 164 high school athletes. All completed the 2 x 2 Achievement Goals Questionnaire for Sport and the Intrinsic Motivation subscale of the Sport Motivation Scale; the coach for each team rated his athletes' overall sports performance. Using simultaneous-regression analyses, mastery-approach goals positively predicted both intrinsic motivation and performance in sports, whereas performance-avoidance goals negatively predicted sports performance. These results suggest that athletes who pursue task mastery and improvement of their competence perform well and enjoy their participation. In contrast, those who focus on avoiding normative incompetence perform poorly.

Teacher performance goal practices and elementary students' behavioral engagement: a developmental perspective.

PubMed

Hughes, Jan N; Wu, Wei; West, Stephen G

2011-02-01

We investigated growth trajectories for classroom performance goal practices and for student behavioral engagement across grades 2 to 5 for 497 academically at-risk elementary students. This study is the first longitudinal investigation of performance goal practices in the early elementary years. On average, teacher use of performance goal practices increased and students' behavioral engagement declined across the four years. Using autoregressive latent trajectory (ALT) models, we examined the synchronous relations between teacher-reported performance goal practices and teacher-reported student behavioral engagement. As expected, as students move into classrooms with a new teacher with less emphasis on performance goal practices, they become more behaviorally engaged in school. Gender did not moderate these results. Implications for teacher professional development are discussed. Published by Elsevier Ltd.

Towards automated assistance for operating home medical devices.

PubMed

Gao, Zan; Detyniecki, Marcin; Chen, Ming-Yu; Wu, Wen; Hauptmann, Alexander G; Wactlar, Howard D

2010-01-01

To detect errors when subjects operate a home medical device, we observe them with multiple cameras. We then perform action recognition with a robust approach to recognize action information based on explicitly encoding motion information. This algorithm detects interest points and encodes not only their local appearance but also explicitly models local motion. Our goal is to recognize individual human actions in the operations of a home medical device to see if the patient has correctly performed the required actions in the prescribed sequence. Using a specific infusion pump as a test case, requiring 22 operation steps from 6 action classes, our best classifier selects high likelihood action estimates from 4 available cameras, to obtain an average class recognition rate of 69%.

Intelligent Work Process Engineering System

NASA Technical Reports Server (NTRS)

Williams, Kent E.

2003-01-01

Optimizing performance on work activities and processes requires metrics of performance for management to monitor and analyze in order to support further improvements in efficiency, effectiveness, safety, reliability and cost. Information systems are therefore required to assist management in making timely, informed decisions regarding these work processes and activities. Currently information systems regarding Space Shuttle maintenance and servicing do not exist to make such timely decisions. The work to be presented details a system which incorporates various automated and intelligent processes and analysis tools to capture organize and analyze work process related data, to make the necessary decisions to meet KSC organizational goals. The advantages and disadvantages of design alternatives to the development of such a system will be discussed including technologies, which would need to bedesigned, prototyped and evaluated.

Parallel Programming Strategies for Irregular Adaptive Applications

NASA Technical Reports Server (NTRS)

Biswas, Rupak; Biegel, Bryan (Technical Monitor)

2001-01-01

Achieving scalable performance for dynamic irregular applications is eminently challenging. Traditional message-passing approaches have been making steady progress towards this goal; however, they suffer from complex implementation requirements. The use of a global address space greatly simplifies the programming task, but can degrade the performance for such computations. In this work, we examine two typical irregular adaptive applications, Dynamic Remeshing and N-Body, under competing programming methodologies and across various parallel architectures. The Dynamic Remeshing application simulates flow over an airfoil, and refines localized regions of the underlying unstructured mesh. The N-Body experiment models two neighboring Plummer galaxies that are about to undergo a merger. Both problems demonstrate dramatic changes in processor workloads and interprocessor communication with time; thus, dynamic load balancing is a required component.

Recombination Catalysts for Hypersonic Fuels

NASA Technical Reports Server (NTRS)

Chinitz, W.

1998-01-01

The goal of commercially-viable access to space will require technologies that reduce propulsion system weight and complexity, while extracting maximum energy from the products of combustion. This work is directed toward developing effective nozzle recombination catalysts for the supersonic and hypersonic aeropropulsion engines used to provide such access to space. Effective nozzle recombination will significantly reduce rk=le length (hence, propulsion system weight) and reduce fuel requirements, further decreasing the vehicle's gross lift-off weight. Two such catalysts have been identified in this work, barium and antimony compounds, by developing chemical kinetic reaction mechanisms for these materials and determining the engine performance enhancement for a typical flight trajectory. Significant performance improvements are indicated, using only 2% (mole or mass) of these compounds in the combustor product gas.

A Linux Workstation for High Performance Graphics

NASA Technical Reports Server (NTRS)

Geist, Robert; Westall, James

2000-01-01

The primary goal of this effort was to provide a low-cost method of obtaining high-performance 3-D graphics using an industry standard library (OpenGL) on PC class computers. Previously, users interested in doing substantial visualization or graphical manipulation were constrained to using specialized, custom hardware most often found in computers from Silicon Graphics (SGI). We provided an alternative to expensive SGI hardware by taking advantage of third-party, 3-D graphics accelerators that have now become available at very affordable prices. To make use of this hardware our goal was to provide a free, redistributable, and fully-compatible OpenGL work-alike library so that existing bodies of code could simply be recompiled. for PC class machines running a free version of Unix. This should allow substantial cost savings while greatly expanding the population of people with access to a serious graphics development and viewing environment. This should offer a means for NASA to provide a spectrum of graphics performance to its scientists, supplying high-end specialized SGI hardware for high-performance visualization while fulfilling the requirements of medium and lower performance applications with generic, off-the-shelf components and still maintaining compatibility between the two.

Motivational Profiles as a Combination of Academic Goals in Higher Education

ERIC Educational Resources Information Center

Valle, Antonio; Núñez, José Carlos; Cabanach, Ramón G.; Rodríguez, Susana; Rosário, Pedro; Inglés, Cándido J.

2015-01-01

The aim of the current study was to obtain information from students in higher education on different motivational profiles that resulted from the combination of three academic goals (i.e. learning goals (LG), performance-approach goals and performance-avoidance goals). Moreover, information related to the relevance of each goal within each…

Evaluating rehabilitation goals of visually impaired children in multidisciplinary care according to ICF-CY guidelines.

PubMed

Rainey, Linda; van Nispen, Ruth; van Rens, Ger

2014-11-01

To gain qualitative insight into the rehabilitation goals of visually impaired children and how these goals relate to the structure of the International Classification of Functioning, Disability and Health (ICF) and patient characteristics. A patient record study was conducted, analysing rehabilitation goals and characteristics of children with a suspected visual impairment in the Netherlands (<18 years) who applied for multidisciplinary services in 2012 (N = 289). Chi-square analyses for trend in rehabilitation content across age bands and additional analyses were performed. The three most common diagnoses were nystagmus (21.2%), cerebral visual impairment (16.2%) and albinism (6.1%). Rehabilitation goals for children aged <7 years were mostly aimed at 'physical (visual) functioning' (36.7%) and 'environmental factors' (36.7%). For children ≥7 years, significantly more goals were identified on activity and participation (A&P) domains (52.2%). Three A and P domains presented a significant linear trend on the number of rehabilitation goals across age bands: (1) 'Learning and applying knowledge' (13.042, p < 0.001), (4) 'Mobility' (31.340, p < 0.001) and (8) 'Major life areas' (5.925, p = 0.015). Regression analysis showed that both age and visual acuity significantly contributed to the number of A and P goals. Although analyses were based on a selection of patient records, the number and nature of rehabilitation goals differ significantly with age. Many A and P goals seem underrepresented at the intake procedure, for example: communication, peer interaction and participating in leisure activities. A systematic, standardized procedure is required to catalogue all existing goals and to be able to evaluate progress and potential new or other important goals. © 2013 Acta Ophthalmologica Scandinavica Foundation. Published by John Wiley & Sons Ltd.

A goal bias in action: The boundaries adults perceive in events align with sites of actor intent.

PubMed

Levine, Dani; Hirsh-Pasek, Kathy; Pace, Amy; Michnick Golinkoff, Roberta

2017-06-01

We live in a dynamic world comprised of continuous events. Remembering our past and predicting future events, however, requires that we segment these ongoing streams of information in a consistent manner. How is this segmentation achieved? This research examines whether the boundaries adults perceive in events, such as the Olympic figure skating routine used in these studies, align with the beginnings (sources) and endings (goals) of human goal-directed actions. Study 1 showed that a group of experts, given an explicit task with unlimited time to rewatch the event, identified the same subevents as one another, but with greater agreement as to the timing of goals than sources. In Study 2, experts, novices familiarized with the figure skating sequence, and unfamiliarized novices performed an online event segmentation task, marking boundaries as the video progressed in real time. The online boundaries of all groups corresponded with the sources and goals offered by Study 1's experts, with greater alignment of goals than sources. Additionally, expertise, but not mere perceptual familiarity, boosted the alignment of sources and goals. Finally, Study 3, which presented novices with the video played in reverse, indicated, unexpectedly, that even when spatiotemporal cues were disrupted, viewers' perceived event boundaries still aligned with their perception of the actors' intended sources and goals. This research extends the goal bias to event segmentation, and suggests that our spontaneous sensitivity toward goals may allow us to transform even relatively complex and unfamiliar event streams into structured and meaningful representations. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

Predicting academic self-handicapping in different age groups: the role of personal achievement goals and social goals.

PubMed

Leondari, Angeliki; Gonida, Eleftheria

2007-09-01

Academic self-handicapping refers to the use of impediments to successful performance on academic tasks. Previous studies have shown that it is related to personal achievement goals. A performance goal orientation is a positive predictor of self-handicapping, whereas a task goal orientation is unrelated to self-handicapping. The aim of this study was to examine the relationship between academic self-handicapping, goal orientations (task, performance-approach, performance-avoidance), social goals, future consequences and achievement in mathematics. An additional aim was to investigate grade-level and gender differences in relation to academic self-handicapping. Participants were 702 upper elementary, junior and senior high school students with approximately equal numbers of girls and boys. There were no grade-level or gender differences as regards the use of self-handicapping. The correlations among the variables revealed that, when the whole sample was considered, self-handicapping was positively related to performance goal orientations and pleasing significant others and negatively to achievement in mathematics. The results of hierarchical regression analysis showed that, in upper elementary and junior high schools, the association between achievement in mathematics and self-handicapping was mediated by performance-avoidance goals. In senior high school, only task goal orientation was a negative predictor of self-handicapping.

National Unmanned Aerial System Standardized Performance Testing and Rating (NUSTAR)

NASA Technical Reports Server (NTRS)

Kopardekar, Parimal

2016-01-01

The overall objective of the NUSTAR Capability is to offer standardized tests and scenario conditions to assess performance of the UAS. The following are goals of the NU-STAR: 1. Create a prototype standardized tests and scenarios that vehicles can be tested against. 2. Identify key performance parameters of all UAS and their standardized measurement strategy. 3. Develop standardized performance reporting method (e.g., consumer report style) to assist prospective buyers. 4. Identify key performance metrics that could be used by judged towards overall safety of the UAS and operations. 5. If vehicle certification standard is made by a regulatory agency, the performance of individual UAS could be compared against the minimum requirement (e.g., sense and avoid detection time, stopping distance, kinetic energy, etc.).

Recovery Act - CAREER: Sustainable Silicon -- Energy-Efficient VLSI Interconnect for Extreme-Scale Computing

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chiang, Patrick

2014-01-31

The research goal of this CAREER proposal is to develop energy-efficient, VLSI interconnect circuits and systems that will facilitate future massively-parallel, high-performance computing. Extreme-scale computing will exhibit massive parallelism on multiple vertical levels, from thou­ sands of computational units on a single processor to thousands of processors in a single data center. Unfortunately, the energy required to communicate between these units at every level (on­ chip, off-chip, off-rack) will be the critical limitation to energy efficiency. Therefore, the PI's career goal is to become a leading researcher in the design of energy-efficient VLSI interconnect for future computing systems.

Priming patient safety: A middle-range theory of safety goal priming via safety culture communication.

PubMed

Groves, Patricia S; Bunch, Jacinda L

2018-05-18

The aim of this paper is discussion of a new middle-range theory of patient safety goal priming via safety culture communication. Bedside nurses are key to safe care, but there is little theory about how organizations can influence nursing behavior through safety culture to improve patient safety outcomes. We theorize patient safety goal priming via safety culture communication may support organizations in this endeavor. According to this theory, hospital safety culture communication activates a previously held patient safety goal and increases the perceived value of actions nurses can take to achieve that goal. Nurses subsequently prioritize and are motivated to perform tasks and risk assessment related to achieving patient safety. These efforts continue until nurses mitigate or ameliorate identified risks and hazards during the patient care encounter. Critically, this process requires nurses to have a previously held safety goal associated with a repertoire of appropriate actions. This theory suggests undergraduate educators should foster an outcomes focus emphasizing the connections between nursing interventions and safety outcomes, hospitals should strategically structure patient safety primes into communicative activities, and organizations should support professional development including new skills and the latest evidence supporting nursing practice for patient safety. © 2018 John Wiley & Sons Ltd.

49 CFR 23.41 - What is the basic overall goal requirement for recipients?

Code of Federal Regulations, 2013 CFR

2013-10-01

... 49 Transportation 1 2013-10-01 2013-10-01 false What is the basic overall goal requirement for recipients? 23.41 Section 23.41 Transportation Office of the Secretary of Transportation PARTICIPATION OF DISADVANTAGED BUSINESS ENTERPRISE IN AIRPORT CONCESSIONS Goals, Good Faith Efforts, and Counting § 23.41 What is...

49 CFR 23.43 - What are the consultation requirements in the development of recipients' overall goals?

Code of Federal Regulations, 2014 CFR

2014-10-01

... 49 Transportation 1 2014-10-01 2014-10-01 false What are the consultation requirements in the development of recipients' overall goals? 23.43 Section 23.43 Transportation Office of the Secretary of Transportation PARTICIPATION OF DISADVANTAGED BUSINESS ENTERPRISE IN AIRPORT CONCESSIONS Goals, Good Faith...

49 CFR 23.43 - What are the consultation requirements in the development of recipients' overall goals?

Code of Federal Regulations, 2013 CFR

2013-10-01

... 49 Transportation 1 2013-10-01 2013-10-01 false What are the consultation requirements in the development of recipients' overall goals? 23.43 Section 23.43 Transportation Office of the Secretary of Transportation PARTICIPATION OF DISADVANTAGED BUSINESS ENTERPRISE IN AIRPORT CONCESSIONS Goals, Good Faith...

49 CFR 23.45 - What are the requirements for submitting overall goal information to the FAA?

Code of Federal Regulations, 2014 CFR

2014-10-01

... 49 Transportation 1 2014-10-01 2014-10-01 false What are the requirements for submitting overall goal information to the FAA? 23.45 Section 23.45 Transportation Office of the Secretary of Transportation PARTICIPATION OF DISADVANTAGED BUSINESS ENTERPRISE IN AIRPORT CONCESSIONS Goals, Good Faith...

49 CFR 23.45 - What are the requirements for submitting overall goal information to the FAA?

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 1 2011-10-01 2011-10-01 false What are the requirements for submitting overall goal information to the FAA? 23.45 Section 23.45 Transportation Office of the Secretary of Transportation PARTICIPATION OF DISADVANTAGED BUSINESS ENTERPRISE IN AIRPORT CONCESSIONS Goals, Good Faith...

49 CFR 23.43 - What are the consultation requirements in the development of recipients' overall goals?

Code of Federal Regulations, 2012 CFR

2012-10-01

... 49 Transportation 1 2012-10-01 2012-10-01 false What are the consultation requirements in the development of recipients' overall goals? 23.43 Section 23.43 Transportation Office of the Secretary of Transportation PARTICIPATION OF DISADVANTAGED BUSINESS ENTERPRISE IN AIRPORT CONCESSIONS Goals, Good Faith...

49 CFR 23.41 - What is the basic overall goal requirement for recipients?

Code of Federal Regulations, 2012 CFR

2012-10-01

... 49 Transportation 1 2012-10-01 2012-10-01 false What is the basic overall goal requirement for recipients? 23.41 Section 23.41 Transportation Office of the Secretary of Transportation PARTICIPATION OF DISADVANTAGED BUSINESS ENTERPRISE IN AIRPORT CONCESSIONS Goals, Good Faith Efforts, and Counting § 23.41 What is...

49 CFR 23.45 - What are the requirements for submitting overall goal information to the FAA?

Code of Federal Regulations, 2012 CFR

2012-10-01

... 49 Transportation 1 2012-10-01 2012-10-01 false What are the requirements for submitting overall goal information to the FAA? 23.45 Section 23.45 Transportation Office of the Secretary of Transportation PARTICIPATION OF DISADVANTAGED BUSINESS ENTERPRISE IN AIRPORT CONCESSIONS Goals, Good Faith...

49 CFR 23.45 - What are the requirements for submitting overall goal information to the FAA?

Code of Federal Regulations, 2013 CFR

2013-10-01

... 49 Transportation 1 2013-10-01 2013-10-01 false What are the requirements for submitting overall goal information to the FAA? 23.45 Section 23.45 Transportation Office of the Secretary of Transportation PARTICIPATION OF DISADVANTAGED BUSINESS ENTERPRISE IN AIRPORT CONCESSIONS Goals, Good Faith...

49 CFR 23.43 - What are the consultation requirements in the development of recipients' overall goals?

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 1 2011-10-01 2011-10-01 false What are the consultation requirements in the development of recipients' overall goals? 23.43 Section 23.43 Transportation Office of the Secretary of Transportation PARTICIPATION OF DISADVANTAGED BUSINESS ENTERPRISE IN AIRPORT CONCESSIONS Goals, Good Faith...

49 CFR 23.41 - What is the basic overall goal requirement for recipients?

Code of Federal Regulations, 2014 CFR

2014-10-01

... 49 Transportation 1 2014-10-01 2014-10-01 false What is the basic overall goal requirement for recipients? 23.41 Section 23.41 Transportation Office of the Secretary of Transportation PARTICIPATION OF DISADVANTAGED BUSINESS ENTERPRISE IN AIRPORT CONCESSIONS Goals, Good Faith Efforts, and Counting § 23.41 What is...

49 CFR 23.41 - What is the basic overall goal requirement for recipients?

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 1 2011-10-01 2011-10-01 false What is the basic overall goal requirement for recipients? 23.41 Section 23.41 Transportation Office of the Secretary of Transportation PARTICIPATION OF DISADVANTAGED BUSINESS ENTERPRISE IN AIRPORT CONCESSIONS Goals, Good Faith Efforts, and Counting § 23.41 What is...

49 CFR 23.41 - What is the basic overall goal requirement for recipients?

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 1 2010-10-01 2010-10-01 false What is the basic overall goal requirement for recipients? 23.41 Section 23.41 Transportation Office of the Secretary of Transportation PARTICIPATION OF DISADVANTAGED BUSINESS ENTERPRISE IN AIRPORT CONCESSIONS Goals, Good Faith Efforts, and Counting § 23.41 What is...

49 CFR 23.45 - What are the requirements for submitting overall goal information to the FAA?

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 1 2010-10-01 2010-10-01 false What are the requirements for submitting overall goal information to the FAA? 23.45 Section 23.45 Transportation Office of the Secretary of Transportation PARTICIPATION OF DISADVANTAGED BUSINESS ENTERPRISE IN AIRPORT CONCESSIONS Goals, Good Faith...

Goal striving strategies and effort mobilization: When implementation intentions reduce effort-related cardiac activity during task performance.

PubMed

Freydefont, Laure; Gollwitzer, Peter M; Oettingen, Gabriele

2016-09-01

Two experiments investigate the influence of goal and implementation intentions on effort mobilization during task performance. Although numerous studies have demonstrated the beneficial effects of setting goals and making plans on performance, the effects of goals and plans on effort-related cardiac activity and especially the cardiac preejection period (PEP) during goal striving have not yet been addressed. According to the Motivational Intensity Theory, participants should increase effort mobilization proportionally to task difficulty as long as success is possible and justified. Forming goals and making plans should allow for reduced effort mobilization when participants perform an easy task. However, when the task is difficult, goals and plans should differ in their effect on effort mobilization. Participants who set goals should disengage, whereas participants who made if-then plans should stay in the field showing high effort mobilization during task performance. As expected, using an easy task in Experiment 1, we observed a lower cardiac PEP in both the implementation intention and the goal intention condition than in the control condition. In Experiment 2, we varied task difficulty and demonstrated that while participants with a mere goal intention disengaged from difficult tasks, participants with an implementation intention increased effort mobilization proportionally with task difficulty. These findings demonstrate the influence of goal striving strategies (i.e., mere goals vs. if-then plans) on effort mobilization during task performance. Copyright © 2016 Elsevier B.V. All rights reserved.

Effects of Goal Setting on Performance and Job Satisfaction

ERIC Educational Resources Information Center

Ivancevich, John M.

1976-01-01

Studied the effect of goal-setting training on the performance and job satisfaction of sales personnel. One group was trained in participative goal setting; one group was trained in assigned goal setting; and one group received no training. Both trained groups showed temporary improvements in performance and job satisfaction. For availability see…

Test anxiety, perfectionism, goal orientation, and academic performance.

PubMed

Eum, KoUn; Rice, Kenneth G

2011-03-01

Dimensions of perfectionism and goal orientation have been reported to have differential relationships with test anxiety. However, the degree of inter-relationship between different dimensions of perfectionism, the 2 × 2 model of goal orientations proposed by Elliot and McGregor, cognitive test anxiety, and academic performance indicators is not known. Based on data from 134 university students, we conducted correlation and regression analyses to test associations between adaptive and maladaptive perfectionism, four types of goal orientations, cognitive test anxiety, and two indicators of academic performance: proximal cognitive performance on a word list recall test and distal academic performance in terms of grade point average. Cognitive test anxiety was inversely associated with both performance indicators, and positively associated with maladaptive perfectionism and avoidance goal orientations. Adaptive and maladaptive perfectionism accounted for significant variance in cognitive test anxiety after controlling for approach and avoidance goal orientations. Overall, nearly 50% of the variance in cognitive test anxiety could be attributed to gender, goal orientations, and perfectionism. Results suggested that students who are highly test anxious are likely to be women who endorse avoidance goal orientations and are maladaptively perfectionistic.

What to do? The effects of discrepancies, incentives, and time on dynamic goal prioritization.

PubMed

Schmidt, Aaron M; DeShon, Richard P

2007-07-01

This study examined factors that influence the dynamic pursuit of multiple goals over time. As hypothesized, goal-performance discrepancies were significantly related to subsequent time allocation. Greater distance from a given goal resulted in greater time subsequently allocated to that goal. In addition, the incentives offered for goal attainment determined the relative influence of discrepancies for each goal. When the incentives for each goal were equivalent, progress toward each goal exhibited equal influence, with greater time allocated to whichever goal was furthest from completion at the time. However, with an incentive available for only 1 of the 2 goals, time allocation was largely determined by progress toward the rewarded goal. Likewise, when incentives for each task differed in their approach-avoidance framing, progress toward the avoidance-framed goal was a stronger predictor of subsequent allocation than was progress toward the approach-framed goal. Finally, the influence of goal-performance discrepancies differed as a function of the time remaining for goal pursuit. The implications for future work on dynamic goal prioritization and the provision of performance incentives are discussed.

Polymer, metal and ceramic matrix composites for advanced aircraft engine applications

NASA Technical Reports Server (NTRS)

Mcdanels, D. L.; Serafini, T. T.; Dicarlo, J. A.

1985-01-01

Advanced aircraft engine research within NASA Lewis is being focused on propulsion systems for subsonic, supersonic, and hypersonic aircraft. Each of these flight regimes requires different types of engines, but all require advanced materials to meet their goals of performance, thrust-to-weight ratio, and fuel efficiency. The high strength/weight and stiffness/weight properties of resin, metal, and ceramic matrix composites will play an increasingly key role in meeting these performance requirements. At NASA Lewis, research is ongoing to apply graphite/polyimide composites to engine components and to develop polymer matrices with higher operating temperature capabilities. Metal matrix composites, using magnesium, aluminum, titanium, and superalloy matrices, are being developed for application to static and rotating engine components, as well as for space applications, over a broad temperature range. Ceramic matrix composites are also being examined to increase the toughness and reliability of ceramics for application to high-temperature engine structures and components.

Planning and Performance in Small Groups: Collective Implementation Intentions Enhance Group Goal Striving.

PubMed

Thürmer, J Lukas; Wieber, Frank; Gollwitzer, Peter M

2017-01-01

There are two key motivators to perform well in a group: making a contribution that (a) is crucial for the group (indispensability) and that (b) the other group members recognize (identifiability). We argue that indispensability promotes setting collective ("We") goals whereas identifiability induces individual ("I") goals. Although both goals may enhance performance, they should align with different strategies. Whereas pursuing collective goals should involve more cooperation, pursuing individual goals should involve less cooperation. Two experiments support this reasoning and show that planning out collective goals with collective implementation intentions (cIIs or "We-plans") relies on cooperation but planning out individual goals with individual implementation intentions (IIs or "I-plans") does not. In Experiment 1, three-member groups first formed a collective or an individual goal and then performed a first round of a physical persistence task. Groups then either formed a respective implementation intention (cII or II) or a control plan and then performed a second round of the task. Although groups with cIIs and IIs performed better on a physical persistence task than respective control groups, only cII groups interacted more cooperatively during task performance. To confirm the causal role of these interaction processes, Experiment 2 used the same persistence task and manipulated whether groups could communicate: When communication was hindered, groups with cIIs but not groups with IIs performed worse. Communication thus qualifies as a process making cIIs effective. The present research offers a psychology of action account to small group performance.

Intrinsic motivation, performance, and the mediating role of mastery goal orientation: a test of self-determination theory.

PubMed

Cerasoli, Christopher P; Ford, Michael T

2014-01-01

Although intrinsic motivation has been linked repeatedly to performance and outcomes, the causal relationship between the two has remained unclear. To explain the link, this study considered the focusing influence of mastery goals. Using a three-wave panel study and hypotheses drawn from self-determination theory and achievement goal theory, the current study sought to clarify the relationships between intrinsic motivation, mastery goal orientation, and performance. Specifically, the current study hypothesized and found that mastery goals mediated (explained) the relationship between intrinsic motivation and performance.

The NASA Aviation Safety Program: Overview

NASA Technical Reports Server (NTRS)

Shin, Jaiwon

2000-01-01

In 1997, the United States set a national goal to reduce the fatal accident rate for aviation by 80% within ten years based on the recommendations by the Presidential Commission on Aviation Safety and Security. Achieving this goal will require the combined efforts of government, industry, and academia in the areas of technology research and development, implementation, and operations. To respond to the national goal, the National Aeronautics and Space Administration (NASA) has developed a program that will focus resources over a five year period on performing research and developing technologies that will enable improvements in many areas of aviation safety. The NASA Aviation Safety Program (AvSP) is organized into six research areas: Aviation System Modeling and Monitoring, System Wide Accident Prevention, Single Aircraft Accident Prevention, Weather Accident Prevention, Accident Mitigation, and Synthetic Vision. Specific project areas include Turbulence Detection and Mitigation, Aviation Weather Information, Weather Information Communications, Propulsion Systems Health Management, Control Upset Management, Human Error Modeling, Maintenance Human Factors, Fire Prevention, and Synthetic Vision Systems for Commercial, Business, and General Aviation aircraft. Research will be performed at all four NASA aeronautics centers and will be closely coordinated with Federal Aviation Administration (FAA) and other government agencies, industry, academia, as well as the aviation user community. This paper provides an overview of the NASA Aviation Safety Program goals, structure, and integration with the rest of the aviation community.

A large-stroke cryogenic imaging FTS system for SPICA-Safari

NASA Astrophysics Data System (ADS)

Jellema, Willem; van Loon, Dennis; Naylor, David; Roelfsema, Peter

2014-08-01

The scientific goals of the far-infrared astronomy mission SPICA challenge the design of a large-stroke imaging FTS for Safari, inviting for the development of a new generation of cryogenic actuators with very low dissipation. In this paper we present the Fourier Transform Spectrometer (FTS) system concept, as foreseen for SPICA-Safari, and we discuss the technical developments required to satisfy the instrument performance.

DoD Product Line Practice Workshop Report

DTIC Science & Technology

1998-05-01

capability. The essential enterprise management practices include ensuring sound business goals providing an appropriate funding model performing...business. This way requires vision and explicit support at the organizational level. There must be an explicit funding model to support the development...the same group seems to work best in smaller organizations. A funding model for core asset development also needs to be developed because the core

Systems Engineering of Electric and Hybrid Vehicles

NASA Technical Reports Server (NTRS)

Kurtz, D. W.; Levin, R. R.

1986-01-01

Technical paper notes systems engineering principles applied to development of electric and hybrid vehicles such that system performance requirements support overall program goal of reduced petroleum consumption. Paper discusses iterative design approach dictated by systems analyses. In addition to obvious peformance parameters of range, acceleration rate, and energy consumption, systems engineering also considers such major factors as cost, safety, reliability, comfort, necessary supporting infrastructure, and availability of materials.

ISS Mini AERCam Radio Frequency (RF) Coverage Analysis Using iCAT Development Tool

NASA Technical Reports Server (NTRS)

Bolen, Steve; Vazquez, Luis; Sham, Catherine; Fredrickson, Steven; Fink, Patrick; Cox, Jan; Phan, Chau; Panneton, Robert

2003-01-01

The long-term goals of the National Aeronautics and Space Administration's (NASA's) Human Exploration and Development of Space (HEDS) enterprise may require the development of autonomous free-flier (FF) robotic devices to operate within the vicinity of low-Earth orbiting spacecraft to supplement human extravehicular activities (EVAs) in space. Future missions could require external visual inspection of the spacecraft that would be difficult, or dangerous, for humans to perform. Under some circumstance, it may be necessary to employ an un-tethered communications link between the FF and the users. The interactive coverage analysis tool (ICAT) is a software tool that has been developed to perform critical analysis of the communications link performance for a FF operating in the vicinity of the International Space Station (ISS) external environment. The tool allows users to interactively change multiple parameters of the communications link parameters to efficiently perform systems engineering trades on network performance. These trades can be directly translated into design and requirements specifications. This tool significantly reduces the development time in determining a communications network topology by allowing multiple parameters to be changed, and the results of link coverage to be statistically characterized and plotted interactively.

The application of Goal Management Training to aspects of financial management in individuals with traumatic brain injury.

PubMed

Grant, Michele; Ponsford, Jennie; Bennett, Pauleen C

2012-01-01

Executive functions encompass planning, problem-solving and self-monitoring abilities, abilities that are implicit in goal attainment and often compromised in individuals with traumatic brain injury (TBI). Goal Management Training (GMT) is a theoretically based rehabilitation protocol that was developed to improve goal-directed behaviour. To date, there is evidence to support the efficacy of GMT in healthy older adults and in one previously high functioning individual with acquired brain injury. However, there is no evidence that, in individuals with TBI and severe cognitive impairments, GMT leads to sustained improvement on everyday tasks requiring planning and organisation. The current study was conducted to explore the efficacy of GMT in helping individuals with TBI to improve aspects of their day-to-day financial management. Four participants with severe TBI completed a modified GMT module. Outcomes were assessed using Goal Attainment Scaling. Five control participants were also recruited as a comparison group for the Multiple Errands Task which was used to measure generalisation. The outcomes in each case were variable. Overall the results showed that the structured GMT intervention assisted some TBI individuals to improve their performance on financial management tasks, with evidence of generalisation in some cases.

A pilot cluster randomized controlled trial of structured goal-setting following stroke.

PubMed

Taylor, William J; Brown, Melanie; William, Levack; McPherson, Kathryn M; Reed, Kirk; Dean, Sarah G; Weatherall, Mark

2012-04-01

To determine the feasibility, the cluster design effect and the variance and minimal clinical importance difference in the primary outcome in a pilot study of a structured approach to goal-setting. A cluster randomized controlled trial. Inpatient rehabilitation facilities. People who were admitted to inpatient rehabilitation following stroke who had sufficient cognition to engage in structured goal-setting and complete the primary outcome measure. Structured goal elicitation using the Canadian Occupational Performance Measure. Quality of life at 12 weeks using the Schedule for Individualised Quality of Life (SEIQOL-DW), Functional Independence Measure, Short Form 36 and Patient Perception of Rehabilitation (measuring satisfaction with rehabilitation). Assessors were blinded to the intervention. Four rehabilitation services and 41 patients were randomized. We found high values of the intraclass correlation for the outcome measures (ranging from 0.03 to 0.40) and high variance of the SEIQOL-DW (SD 19.6) in relation to the minimally importance difference of 2.1, leading to impractically large sample size requirements for a cluster randomized design. A cluster randomized design is not a practical means of avoiding contamination effects in studies of inpatient rehabilitation goal-setting. Other techniques for coping with contamination effects are necessary.

Financial performance of the teaching pharmacies in Isfahan: an economic evaluation

PubMed Central

Sabzghabaee, A.M.; Etebari, M.; Sajjadi, H.; Badri, Sh.; Hosseini-Biuki, S.M.; Sheikhaboumasoudi, R.

2009-01-01

Teaching pharmacies are amongst the important cornerstones of a healthcare system for drug supplying, pharmacy education and pharmacy practice research. Assessment of the Iranian healthcare system costs shows that after personnel charges, drug outlay is the second expensive factor. This great financial mass requires integral audit and management in order to provide costumers satisfaction in addition to financial viability. Teaching pharmacies are required to realize financial viability as well as providing several educational and drug servicing goals, which makes microeconomic analysis important. The aim of this study was to evaluate the financial performance of the teaching pharmacies affiliated with the Isfahan University of Medical Sciences (with the abrreviated names as: SHM, ISJ, AZH for the confidentialiy of the financial data). This is a descriptive and cross-sectional study done in 2008. The target pharmacies of this study were all the 3 teaching pharmacies affiliated with the Isfahan University of Medical Sciences. The data collecting template was prepared using the standard scientific methods according to the goals of this research The goals also nominated necessary items needed in economic profit evaluation. The data collection template was completed by reference to the teaching pharmacies financial documents and reports, used as a base for calculating the total income and the total costs in 2007-2008 financial year. The difference between these two balances showed the value of profits or loss. The profit/cost ratio was also calculated, using the proportion of the total income to the total costs. The collected data was statistically analyzed using the Excel software (Microsoft 2007). For the financial year 2007-2008, the difference between the total income and the total costs was -831.6 million Rials (excess costs to income) for the SHM pharmacy, + 25.4 billion Rials for the ISJ pharmacy and -429.5 million Rials for the AZH pharmacy. According to our findings there is a strong requirement to improve the financial performance of all the three teaching pharmacies while maintaining a high standardard of teaching and educational affairs. PMID:21589804

Financial performance of the teaching pharmacies in Isfahan: an economic evaluation.

PubMed

Sabzghabaee, A M; Etebari, M; Sajjadi, H; Badri, Sh; Hosseini-Biuki, S M; Sheikhaboumasoudi, R

2009-07-01

Teaching pharmacies are amongst the important cornerstones of a healthcare system for drug supplying, pharmacy education and pharmacy practice research. Assessment of the Iranian healthcare system costs shows that after personnel charges, drug outlay is the second expensive factor. This great financial mass requires integral audit and management in order to provide costumers satisfaction in addition to financial viability. Teaching pharmacies are required to realize financial viability as well as providing several educational and drug servicing goals, which makes microeconomic analysis important. The aim of this study was to evaluate the financial performance of the teaching pharmacies affiliated with the Isfahan University of Medical Sciences (with the abrreviated names as: SHM, ISJ, AZH for the confidentialiy of the financial data). This is a descriptive and cross-sectional study done in 2008. The target pharmacies of this study were all the 3 teaching pharmacies affiliated with the Isfahan University of Medical Sciences. The data collecting template was prepared using the standard scientific methods according to the goals of this research The goals also nominated necessary items needed in economic profit evaluation. The data collection template was completed by reference to the teaching pharmacies financial documents and reports, used as a base for calculating the total income and the total costs in 2007-2008 financial year. The difference between these two balances showed the value of profits or loss. The profit/cost ratio was also calculated, using the proportion of the total income to the total costs. The collected data was statistically analyzed using the Excel software (Microsoft 2007). For the financial year 2007-2008, the difference between the total income and the total costs was -831.6 million Rials (excess costs to income) for the SHM pharmacy, + 25.4 billion Rials for the ISJ pharmacy and -429.5 million Rials for the AZH pharmacy. According to our findings there is a strong requirement to improve the financial performance of all the three teaching pharmacies while maintaining a high standardard of teaching and educational affairs.

Robust Multivariable Optimization and Performance Simulation for ASIC Design

NASA Technical Reports Server (NTRS)

DuMonthier, Jeffrey; Suarez, George

2013-01-01

Application-specific-integrated-circuit (ASIC) design for space applications involves multiple challenges of maximizing performance, minimizing power, and ensuring reliable operation in extreme environments. This is a complex multidimensional optimization problem, which must be solved early in the development cycle of a system due to the time required for testing and qualification severely limiting opportunities to modify and iterate. Manual design techniques, which generally involve simulation at one or a small number of corners with a very limited set of simultaneously variable parameters in order to make the problem tractable, are inefficient and not guaranteed to achieve the best possible results within the performance envelope defined by the process and environmental requirements. What is required is a means to automate design parameter variation, allow the designer to specify operational constraints and performance goals, and to analyze the results in a way that facilitates identifying the tradeoffs defining the performance envelope over the full set of process and environmental corner cases. The system developed by the Mixed Signal ASIC Group (MSAG) at the Goddard Space Flight Center is implemented as a framework of software modules, templates, and function libraries. It integrates CAD tools and a mathematical computing environment, and can be customized for new circuit designs with only a modest amount of effort as most common tasks are already encapsulated. Customization is required for simulation test benches to determine performance metrics and for cost function computation.

Optimum design of high speed prop rotors including the coupling of performance, aeroelastic stability and structures

NASA Technical Reports Server (NTRS)

Chattopadhyay, Aditi; Mccarthy, Thomas R.; Madden, John F., III

1992-01-01

An optimization procedure is developed for the design of high speed prop-rotors to be used in civil tiltrotor applications. The goal is to couple aerodynamic performance, aeroelastic stability, and structural design requirements inside a closed-loop optimization procedure. The objective is to minimize the gross weight and maximize the propulsive efficiency in high speed cruise. Constraints are imposed on the rotor aeroelastic stability in both hover and cruise and rotor figure of merit in hover. Both structural and aerodynamic design variables are used.

New aspects relating to the behaviour of composites and adhesives in space

NASA Technical Reports Server (NTRS)

Carpenter, A.

1991-01-01

Some of the specialized testing procedures performed at the JPL Molecular Contamination Investigation Facility for the WideField Planetary Camera II (WFPC II) program for the screening of polymeric materials for outgassing properties are described. For WFPC II, a science performance goal of 1-percent photometric accuracy at 1470 A over an extended time (at least 30 days) has been established. Utilization of the newest technology using CCD detectors poses even more stringent requirements. Test results are presented, and data reduction and modeling techniques are discussed.

Radio science ground data system for the Voyager-Neptune encounter, part 1

NASA Technical Reports Server (NTRS)

Kursinski, E. R.; Asmar, S. W.

1991-01-01

The Voyager radio science experiments at Neptune required the creation of a ground data system array that includes a Deep Space Network complex, the Parkes Radio Observatory, and the Usuda deep space tracking station. The performance requirements were based on experience with the previous Voyager encounters, as well as the scientific goals at Neptune. The requirements were stricter than those of the Uranus encounter because of the need to avoid the phase-stability problems experienced during that encounter and because the spacecraft flyby was faster and closer to the planet than previous encounters. The primary requirement on the instrument was to recover the phase and amplitude of the S- and X-band (2.3 and 8.4 GHz) signals under the dynamic conditions encountered during the occultations. The primary receiver type for the measurements was open loop with high phase-noise and frequency stability performance. The receiver filter bandwidth was predetermined based on the spacecraft's trajectory and frequency uncertainties.

The importance of multiple performance criteria for understanding trust in risk managers.

PubMed

Johnson, Branden B; White, Mathew P

2010-07-01

Effective risk management requires balancing several, sometimes competing, goals, such as protecting public health and ensuring cost control. Research examining public trust of risk managers has largely focused on trust that is unspecified or for a single goal. Yet it can be reasonable to have a high level of trust in one aspect of a target's performance but not another. Two studies involving redevelopment of contaminated land (Study 1) and drinking water standards (Study 2) present preliminary evidence on the value of distinguishing between performance criteria for understanding of trust. Study 1 assessed perceptions of several trust targets (councilors, developers, scientists, residents) on their competence (capacity to achieve goals) and willingness to take action under uncertainty for four criteria. Study 2 assessed competence, willingness, and trust for five criteria regarding a single government agency. In both studies overall trust in each target was significantly better explained by considering perceptions of their performance on multiple criteria than on the single criterion of public health. In Study 1, the influence of criteria also varied plausibly across trust targets (e.g., willingness to act under uncertainty increased trust in developers on cost control and councilors on local economic improvement, but decreased it for both targets on environmental protection). Study 2 showed that explained variance in trust increased with both dimension- and trust-based measures of criteria. Further conceptual and methodological development of the notion of multiple trust criteria could benefit our understanding of stated trust judgments.

Role of Performance Goals in Prose Learning

ERIC Educational Resources Information Center

LaPorte, Ronald E.; Nath, Raghu

1976-01-01

Investigates a subject's internalized goals and the relationship of the goals to test performance as a function of different learning instructions. Stating specific goals was found to produce the most significant results among subjects. (Author/DEP)

Improved silicon nitride for advanced heat engines

NASA Technical Reports Server (NTRS)

Yeh, Hun C.; Fang, Ho T.

1987-01-01

The technology base required to fabricate silicon nitride components with the strength, reliability, and reproducibility necessary for actual heat engine applications is presented. Task 2 was set up to develop test bars with high Weibull slope and greater high temperature strength, and to conduct an initial net shape component fabrication evaluation. Screening experiments were performed in Task 7 on advanced materials and processing for input to Task 2. The technical efforts performed in the second year of a 5-yr program are covered. The first iteration of Task 2 was completed as planned. Two half-replicated, fractional factorial (2 sup 5), statistically designed matrix experiments were conducted. These experiments have identified Denka 9FW Si3N4 as an alternate raw material to GTE SN502 Si3N4 for subsequent process evaluation. A detailed statistical analysis was conducted to correlate processing conditions with as-processed test bar properties. One processing condition produced a material with a 97 ksi average room temperature MOR (100 percent of goal) with 13.2 Weibull slope (83 percent of goal); another condition produced 86 ksi (6 percent over baseline) room temperature strength with a Weibull slope of 20 (125 percent of goal).

Performance of a Bounce-Averaged Global Model of Super-Thermal Electron Transport in the Earth's Magnetic Field

NASA Technical Reports Server (NTRS)

McGuire, Tim

1998-01-01

In this paper, we report the results of our recent research on the application of a multiprocessor Cray T916 supercomputer in modeling super-thermal electron transport in the earth's magnetic field. In general, this mathematical model requires numerical solution of a system of partial differential equations. The code we use for this model is moderately vectorized. By using Amdahl's Law for vector processors, it can be verified that the code is about 60% vectorized on a Cray computer. Speedup factors on the order of 2.5 were obtained compared to the unvectorized code. In the following sections, we discuss the methodology of improving the code. In addition to our goal of optimizing the code for solution on the Cray computer, we had the goal of scalability in mind. Scalability combines the concepts of portabilty with near-linear speedup. Specifically, a scalable program is one whose performance is portable across many different architectures with differing numbers of processors for many different problem sizes. Though we have access to a Cray at this time, the goal was to also have code which would run well on a variety of architectures.

Doing better (or worse) than one's parents: Social status, mobility, and performance-avoidance goals.

PubMed

Jury, Mickaël; Bruno, Alisée; Darnon, Céline

2018-01-11

Previous research has shown that, when succeeding in higher education, first-generation (FG) students endorse more performance-avoidance goals (i.e., the fear of performing poorly) than continuing-generation (CG) students. In this study, individual mobility is examined as a predictor of performance-avoidance goal endorsement. It is argued that FG students endorse more these goals than CG students because in higher education, the former (but not the latter) experience upward mobility. In addition, CG can also be at risk of endorsing these goals when they are confronted with downward mobility. Two studies were conducted with psychology students (N = 143 in Study 1; N = 176 in Study 2). In Study 1, FG and CG students' perceived upward mobility was measured. In Study 2, FG and CG students were provided with a feedback that suggested either upward or downward mobility. In both studies, participants reported their level of performance-avoidance goal endorsement. Results from Study 1 supported an indirect effect of status on performance-avoidance goals via a higher perception of upward mobility. Results from Study 2 supported that psychology students who face mobility (i.e., FG students who received better feedback than their usual level of performance, CG students who received worse feedback than their usual level of performance) increased their performance-avoidance goals the most. Taken together, the results of these studies support that one's actual social position and, even more, the social position one is about to reach are reliable predictors of performance-avoidance goals. © 2018 The British Psychological Society.

Impaired Context Processing is Attributable to Global Neuropsychological Impairment in Schizophrenia and Psychotic Bipolar Disorder

PubMed Central

Hill, S. Kristian; Gold, James M.; Keefe, Richard S. E.; Clementz, Brett A.; Gershon, Elliot; Keshavan, Matcheri S.; Pearlson, Godfrey; Tamminga, Carol A.; Sweeney, John A.

2017-01-01

Abstract Background: Context processing may reflect a specific cognitive impairment in schizophrenia. Whether impaired context processing is observed across psychotic disorders or among relatives of affected individuals, and whether it is a deficit that is independent from the generalized neuropsychological deficits seen in psychotic disorders, are less established. Methods: Schizophrenia, schizoaffective, and psychotic bipolar probands (n = 660), their first-degree relatives (n = 741), and healthy individuals (n = 308) studied by the Bipolar-Schizophrenia Network on Intermediate Phenotypes consortium performed an expectancy task requiring use of contextual information to overcome a pre-potent response. Sensitivity for target detection and false alarm rates on trials requiring inhibition or goal maintenance were measured. Results: Proband groups and relatives with psychosis spectrum personality traits demonstrated reduced target sensitivity and elevated false alarm rates. False alarm rate was higher under inhibition vs goal maintenance conditions although this difference was attenuated in schizophrenia and schizoaffective proband groups. After accounting for global neuropsychological impairment, as reflected by the composite score from the Brief Assessment of Cognition in Schizophrenia neuropsychological battery, deficits in schizophrenia and bipolar proband groups were no longer significant. Performance measures were moderately familial. Conclusion: Reduced target detection, but not a specific deficit in context processing, is observed across psychotic disorders. Impairments in both goal maintenance and response inhibition appear to contribute comparably to deficits in schizophrenia and schizoaffective disorder, whereas greater difficulty with response inhibition underlies deficits in bipolar disorder. Yet, these deficits are not independent from the generalized neurocognitive impairment observed in schizophrenia and psychotic bipolar disorder. PMID:27306316

DOE Office of Scientific and Technical Information (OSTI.GOV)

Short, Steven M.; Coles, Garill A.; Bohlander, Karl L.

In June 2004 the U.S. Nuclear Regulatory Commission (NRC) amended its fire protection requirements to permit existing nuclear power reactor licensees to voluntarily adopt fire protection requirements contained in National Fire Protection Association (NFPA) Standard 805. NFPA 805 is a performance-based standard for nuclear power plant fire protection that is an alternative to the deterministic, prescriptive fire protection requirements, such as 10 CFR 50 Appendix R, that was issued in 1980. One aspect of implementing NFPA 805 is that the licensee adopts the performance goals, objectives, and criteria for nuclear safety specified in the Standard. These goals, objectives, and criteriamore » can be met through the implementation of deterministic approaches or performance-based approaches, including engineering analyses, probabilistic risk assessment, and fire modeling. Licensees voluntarily adopting the fire protection requirements in NFPA 805 must submit a license amendment request (LAR) to the NRC. The LAR provides the new proposed fire protection licensing basis, including the methodology and results of required evaluations and analyses that show how the NFPA 805 performance criteria are met. As of August 2014, licensees have submitted LARs for 26 nuclear power plants, representing 42 nuclear reactor units. Of these, 7 nuclear power plants, representing 10 nuclear reactor units, have been issued a safety evaluation (SE) by the NRC approving transition of their fire protection licensing basis to one that complies with NFPA 805. Pacific Northwest National Laboratory (PNNL) supports the NRC staff’s technical review of the LARs in the areas of fundamental fire protection, safe shutdown analysis, and Probabilistic Risk Assessment (PRA). PNNL, of course, cannot speak for the nuclear industry and its choice of implementation strategies or the NRC staff’s assessment of the approaches being taken to adopt NFPA 805. However, as a reviewer of the technical details of these submittals, PNNL is in a position to observe the array of implementation tactics taken in these submittals, and observe different ways licensees are making the NFPA 805 process work. For example, we see differences in how fire areas are being transitioned, the kinds of plant modifications being implemented, the changes being made to plant procedures, the number and types of recovery actions being credited, and the kinds and extent of detailed modeling being performed in support of the Fire PRAs. As a caveat, we note that it is probably too early to comment on the overall success or limitations of the NFPA 805 process or provide lessons learned for the future. Furthermore, it is not our intention to endorse any particular approach taken in a submittal over another or to critique the industry or the regulator. Rather our goal in this paper is to summarize a set of interesting and useful differences across submittals that may provide context for further future discussions about what we (i.e., reviewers, industry, and regulators) have learned in being part of the NFPA process; and how to best use that information to inform future NFPA 805 activities or other risk-informed endeavors.« less

From Petascale to Exascale: Eight Focus Areas of R&D Challenges for HPC Simulation Environments

DOE Office of Scientific and Technical Information (OSTI.GOV)

Springmeyer, R; Still, C; Schulz, M

2011-03-17

Programming models bridge the gap between the underlying hardware architecture and the supporting layers of software available to applications. Programming models are different from both programming languages and application programming interfaces (APIs). Specifically, a programming model is an abstraction of the underlying computer system that allows for the expression of both algorithms and data structures. In comparison, languages and APIs provide implementations of these abstractions and allow the algorithms and data structures to be put into practice - a programming model exists independently of the choice of both the programming language and the supporting APIs. Programming models are typically focusedmore » on achieving increased developer productivity, performance, and portability to other system designs. The rapidly changing nature of processor architectures and the complexity of designing an exascale platform provide significant challenges for these goals. Several other factors are likely to impact the design of future programming models. In particular, the representation and management of increasing levels of parallelism, concurrency and memory hierarchies, combined with the ability to maintain a progressive level of interoperability with today's applications are of significant concern. Overall the design of a programming model is inherently tied not only to the underlying hardware architecture, but also to the requirements of applications and libraries including data analysis, visualization, and uncertainty quantification. Furthermore, the successful implementation of a programming model is dependent on exposed features of the runtime software layers and features of the operating system. Successful use of a programming model also requires effective presentation to the software developer within the context of traditional and new software development tools. Consideration must also be given to the impact of programming models on both languages and the associated compiler infrastructure. Exascale programming models must reflect several, often competing, design goals. These design goals include desirable features such as abstraction and separation of concerns. However, some aspects are unique to large-scale computing. For example, interoperability and composability with existing implementations will prove critical. In particular, performance is the essential underlying goal for large-scale systems. A key evaluation metric for exascale models will be the extent to which they support these goals rather than merely enable them.« less

Psychological drivers in doping: The life-cycle model of performance enhancement

PubMed Central

Petróczi, Andrea; Aidman, Eugene

2008-01-01

Background Performance enhancement (PE) is a natural and essential ingredient of competitive sport. Except for nutritional supplement contamination, accidental use of doping is highly unlikely. It requires deliberation, planning and commitment; and is influenced by a host of protective and risk factors. Hypothesis In the course of their career, athletes constantly set goals and make choices regarding the way these goals can be achieved. The cycle of choice – goal commitment – execution – feedback on goal attainment – goal evaluation/adjustment has numerous exit points, each providing an opportunity for behaviour change, which may or may not be related to the use of prohibited methods. The interplay between facilitating and inhibiting systemic and personality factors, constantly influenced by situational factors could result in an outcome vector of 'doping attitudes', which combines with subjective norms to influence intentions to choose prohibited PE methods. These influences also vary from one stage of athlete development to the next, making some athletes more vulnerable to engaging in doping practices than others, and more vulnerable at certain time periods – and not others. Testing the hypothesis Model-testing requires a series of carefully planned and coordinated studies. Correlational studies can establish relationships where the directionality is not-known or not important. Experimental studies with the manipulation of doping expectancies and risk factors can be used to demonstrate causality and evaluate potential intervention strategies. The final model can be tested via a behavioural simulation, with outcomes compared to those expected from literature precedence or used as a simulated computer game for empirical data collection. Implications A hypothesized life-cycle model of PE identifies vulnerability factors across the stages of athlete development with the view of informing the design of anti-doping assessment and intervention. The model suggests that, instead of focusing on the actual engagement in prohibited PE practices, deterrence strategies are likely to be more effective if they target the influencing factors at the appropriate stage and identify groups of athletes and their respective career stages, which pose particular risks of engagement in doping practices. This enables a more effective intervention approach by targeting specific risk factors and expectancies. PMID:18331645

Urban Latino children's physical activity levels and performance in interactive dance video games: effects of goal difficulty and goal specificity.

PubMed

Gao, Zan; Podlog, Leslie

2012-10-01

To examine the effects of different levels of goal specificity and difficulty on Latino children's performance and physical activity (PA) levels in an after-school program incorporating an interactive dance program (Dance Dance Revolution [DDR]; Konami Corporation). Comparison study. Rose Park Elementary School, Salt Lake City, Utah. Ninety-eight Latino children in the first through sixth grades, aged 7 to 13 years. After the pretest, the participants were randomly assigned into 1 of the following 3 goal-setting conditions: (1) easy, (2) difficult, and (3) best effort (hereinafter referred to as do-your-best goal). Participants' PA levels were measured using piezoelectric pedometers, and steps per minute were used as the outcome variable. Participants' total points for their dance on television screens were retrieved as their performance scores. These outcome variables were assessed again 8 weeks later (posttest score). The multivariate analysis of covariance yielded a significant main effect for the goal-setting condition. Follow-up tests revealed that children who set specific (easy or difficult) goals had significantly greater increased PA levels (mean scores, 10.34 for easy and 22.45 for difficult) and DDR performance (0.011 for easy and 0.67 for difficult) than those in the do-your-best group (0.83 for PA and 0.17 for performance). In addition, children's increased PA levels in the difficult-goal group were significantly higher than those in the easy-goal group. The easy- and difficult-goal groups show a significant improvement on DDR performance. The difficult- goal group also displays the highest improvement on PA levels. Strategies to enhance children's DDR performance and PA levels are discussed in relation to the extant goal-setting literature.

Task Goal Attributes, n Achievement, and Supervisory Performance. Technical Report No. 30.

ERIC Educational Resources Information Center

Steers, Richard M.

A review of the research literature on goal-setting in organizational settings reveals that goal-setting on an individual job results in better task performance. However, the processes behind their effectiveness is unclear. For example, how are various job attributes of task goals related to performance, and how do various individual differences…

Design of Mobile Health Tools to Promote Goal Achievement in Self-Management Tasks

PubMed Central

Henderson, Geoffrey; Parmanto, Bambang

2017-01-01

Background Goal-setting within rehabilitation is a common practice ultimately geared toward helping patients make functional progress. Objective The purposes of this study were to (1) qualitatively analyze data from a wellness program for patients with spina bifida (SB) and spinal cord injury (SCI) in order to generate software requirements for a goal-setting module to support their complex goal-setting routines, (2) design a prototype of a goal-setting module within an existing mobile health (mHealth) system, and (3) identify what educational content might be necessary to integrate into the system. Methods A total of 750 goals were analyzed from patients with SB and SCI enrolled in a wellness program. These goals were qualitatively analyzed in order to operationalize a set of software requirements for an mHealth goal-setting module and identify important educational content. Results Those of male sex (P=.02) and with SCI diagnosis (P<.001) were more likely to achieve goals than females or those with SB. Temporality (P<.001) and type (P<.001) of goal were associated with likelihood that the goal would be achieved. Nearly all (210/213; 98.6%) of the fact-finding goals were achieved. There was no significant difference in achievement based on goal theme. Checklists, data tracking, and fact-finding tools were identified as three functionalities that could support goal-setting and achievement in an mHealth system. Based on the qualitative analysis, a list of software requirements for a goal-setting module was generated, and a prototype was developed. Targets for educational content were also generated. Conclusions Innovative mHealth tools can be developed to support commonly set goals by individuals with disabilities. PMID:28739558

The role of goal-focused leadership in enabling the expression of conscientiousness.

PubMed

Colbert, Amy E; Witt, L A

2009-05-01

The authors tested the hypothesis that goal-focused leadership enables conscientious workers to perform effectively by helping them to accurately understand organizational goal priorities. Data collected from 162 workers in a private sector document processing organization supported the hypotheses that goal-focused leadership moderates the relationship between conscientiousness and job performance and that person-organization goal congruence mediates this moderated relationship. Specifically, conscientiousness was more strongly positively related to performance among workers who perceived that their supervisors effectively set goals and defined roles, responsibilities, and priorities than among workers who did not perceive this type of goal-focused leadership. (c) 2009 APA, all rights reserved.

Scaling of Ion Thrusters to Low Power

NASA Technical Reports Server (NTRS)

Patterson, Michael J.; Grisnik, Stanley P.; Soulas, George C.

1998-01-01

Analyses were conducted to examine ion thruster scaling relationships in detail to determine performance limits, and lifetime expectations for thruster input power levels below 0.5 kW. This was motivated by mission analyses indicating the potential advantages of high performance, high specific impulse systems for small spacecraft. The design and development status of a 0.1-0.3 kW prototype small thruster and its components are discussed. Performance goals include thruster efficiencies on the order of 40% to 54% over a specific impulse range of 2000 to 3000 seconds, with a lifetime in excess of 8000 hours at full power. Thruster technologies required to achieve the performance and lifetime targets are identified.

25 CFR 26.19 - Will I be required to contribute financially to my employment and training goals?

Code of Federal Regulations, 2010 CFR

2010-04-01

... employment and training goals? 26.19 Section 26.19 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR HUMAN SERVICES JOB PLACEMENT AND TRAINING PROGRAM General Applicability § 26.19 Will I be required to contribute financially to my employment and training goals? Yes, the Job Placement and Training...

Inter-device differences in monitoring for goal-directed fluid therapy.

PubMed

Thiele, Robert H; Bartels, Karsten; Gan, Tong-Joo

2015-02-01

Goal-directed fluid therapy is an integral component of many Enhanced Recovery After Surgery (ERAS) protocols currently in use. The perioperative clinician is faced with a myriad of devices promising to deliver relevant physiologic data to better guide fluid therapy. The goal of this review is to provide concise information to enable the clinician to make an informed decision when choosing a device to guide goal-directed fluid therapy. The focus of many devices used for advanced hemodynamic monitoring is on providing measurements of cardiac output, while other, more recent, devices include estimates of fluid responsiveness based on dynamic indices that better predict an individual's response to a fluid bolus. Currently available technologies include the pulmonary artery catheter, esophageal Doppler, arterial waveform analysis, photoplethysmography, venous oxygen saturation, as well as bioimpedance and bioreactance. The underlying mechanistic principles for each device are presented as well as their performance in clinical trials relevant for goal-directed therapy in ERAS. The ERAS protocols typically involve a multipronged regimen to facilitate early recovery after surgery. Optimizing perioperative fluid therapy is a key component of these efforts. While no technology is without limitations, the majority of the currently available literature suggests esophageal Doppler and arterial waveform analysis to be the most desirable choices to guide fluid administration. Their performance is dependent, in part, on the interpretation of dynamic changes resulting from intrathoracic pressure fluctuations encountered during mechanical ventilation. Evolving practice patterns, such as low tidal volume ventilation as well as the necessity to guide fluid therapy in spontaneously breathing patients, will require further investigation.

Strategic performance in hospitals: the use of the balanced scorecard by nurse managers.

PubMed

Naranjo-Gil, David

2009-01-01

The competitive and dynamic health care sector has spurred hospitals into delivering greater flexibility and quality of services while cutting the hospital cost at the same time. However, hospitals differ in the extent to which they achieve these strategic goals. This article explores the use of a new management tool-the balanced scorecard-which facilitates managers to meet multiple strategic goals. It also analyzes how nurse managers use the balanced scorecard in an interactive or diagnostic way and its subsequent effect on strategic goal achievement (cost reduction and flexibility). It also examines how "balanced" is the balanced scorecard in terms of financial versus nonfinancial measures. Data were collected from a mail survey sent to 218 nurse managers in Spanish public hospitals. A satisfactory response rate was achieved, with 114 (52.29%) useful answered questionnaires. The results show that younger, more tenured, and clinically trained nurse managers would be more likely to use the balanced scorecard in an interactive way. Conversely, older, less tenured, and administratively trained managers would use it diagnostically. The results also indicate that the balanced scorecard facilitates the cost reduction and flexibility in hospitals only when it is used interactively. This article provides evidence that not only the technical design of the balanced scorecard matters, but also an appropriate use of the balanced scorecard is paramount for achievement of multiple strategic goals. An effective use of the balanced scorecard requires managers to actively stimulate dialogue and agreement among hospital's staff about desirable financial and nonfinancial performance measures in alignment with multiple strategic goals.

Mastering one's destiny: mastery goals promote challenge and success despite social identity threat.

PubMed

Stout, Jane G; Dasgupta, Nilanjana

2013-06-01

We used an achievement goal framework to enhance identity-threatened individuals' motivation and performance by way of an understudied mechanism, namely, challenge appraisals. In three experiments, women were given a mastery goal (focus on building skills) or a performance goal (perform well, avoid errors) before a mock job interview. Women who focused on mastery rather than performance felt more challenged and less threatened when anticipating an identity-threatening interview; goals did not affect appraisals of a nonthreatening interview (Experiment 1). Mastery relative to performance goals enhanced women's intention to be assertive (Experiment 2) and their actual face-to-face performance during the job interview (Experiment 3); challenge appraisals (but not threat appraisals) served as a mediator for these effects. Whereas a great deal of prior work has alleviated identity threat by altering construals of one's identity, the current research uses an alternative strategy--modifying appraisals of the situation, leaving one's self-concept intact.

Solar-Powered Electric Propulsion Systems: Engineering and Applications

NASA Technical Reports Server (NTRS)

Stearns, J. W.; Kerrisk, D. J.

1966-01-01

Lightweight, multikilowatt solar power arrays in conjunction with electric propulsion offer potential improvements to space exploration, extending the usefulness of existing launch vehicles to higher-energy missions. Characteristics of solar-powered electric propulsion missions are outlined, and preliminary performance estimates are shown. Spacecraft system engineering is discussed with respect to parametric trade-offs in power and propulsion system design. Relationships between mission performance and propulsion system performance are illustrated. The present state of the art of electric propulsion systems is reviewed and related to the mission requirements identified earlier. The propulsion system design and test requirements for a mission spacecraft are identified and discussed. Although only ion engine systems are currently available, certain plasma propulsion systems offer some advantages in over-all system design. These are identified, and goals are set for plasma-thrustor systems to make them competitive with ion-engine systems for mission applications.

Real-time measurement of mental workload: A feasibility study

NASA Technical Reports Server (NTRS)

Kramer, Arthur; Humphrey, Darryl; Sirevaag, Erik; Mecklinger, Axel

1990-01-01

The primary goal of the study was to explore the utility of event-related brain potentials (ERP) as real-time measures of workload. To this end, subjects performed two different tasks both separately and together. One task required that subjects monitor a bank of constantly changing gauges and detect critical deviations. Difficulty was varied by changing the predictability of the gauges. The second task was mental arithmetic. Difficulty was varied by requiring subjects to perform operations on either two or three columns of numbers. Two conditions that could easily be distinguished on the basis of performance measures were selected for the real-time evaluation of ERPs. A bootstrapping approach was adopted in which one thousand samples of n trials (n = 1, 3, 5 ...65) were classified using several measures of P300 and Slow Wave amplitude. Classification accuracies of 85 percent were achieved with 25 trials. Results are discussed in terms of potential enhancements for real-time recording.

The Effect of Subconscious Performance Goals on Academic Performance

ERIC Educational Resources Information Center

Bipp, Tanja; Kleingeld, Ad; van Mierlo, Heleen; Kunde, Wilfried

2017-01-01

We investigated the impact of subconscious goals on academic performance in two field experiments. We show that unobtrusive priming of goals with regard to achievement motivation by means of a photograph improves performance in different educational contexts. High-school students who were exposed to an achievement-related photograph achieved…

Trade-off between TMA and RC configurations for JANUS camera

NASA Astrophysics Data System (ADS)

Greggio, D.; Magrin, D.; Munari, M.; Paolinetti, R.; Turella, A.; Zusi, M.; Cremonese, G.; Debei, S.; Della Corte, V.; Friso, E.; Hoffmann, H.; Jaumann, R.; Michaelis, H.; Mugnuolo, R.; Olivieri, A.; Palumbo, P.; Ragazzoni, R.; Schmitz, N.

2016-07-01

JANUS (Jovis Amorum Ac Natorum Undique Scrutator) is a high-resolution visible camera designed for the ESA space mission JUICE (Jupiter Icy moons Explorer). The main scientific goal of JANUS is to observe the surface of the Jupiter satellites Ganymede and Europa in order to characterize their physical and geological properties. During the design phases, we have proposed two possible optical configurations: a Three Mirror Anastigmat (TMA) and a Ritchey-Chrétien (RC) both matching the performance requirements. Here we describe the two optical solutions and compare their performance both in terms of achieved optical quality, sensitivity to misalignment and stray light performances.

Design study of technology requirements for high performance single-propeller-driven business airplanes

NASA Technical Reports Server (NTRS)

Kohlman, D. L.; Hammer, J.

1985-01-01

Developments in aerodyamic, structural and propulsion technologies which influence the potential for significant improvements in performance and fuel efficiency of general aviation business airplanes are discussed. The advancements include such technolgies as natural laminar flow, composite materials, and advanced intermittent combustion engines. The design goal for this parameter design study is a range of 1300 nm at 300 knots true airspeed with a payload of 1200lbs at 35,000 ft cruise altitude. The individual and synergistic effects of various advanced technologies on the optimization of this class of high performance, single engine, propeller driven business airplanes are identified.

Using incentives to achieve A/R goals.

PubMed

Kivimaki, John

2007-09-01

Offering incentives to patient accounts staff can motivate them to meet--and even exceed--hospital and department goals. Tying incentives to goals and key performance indicators shows staff why the goals are important to the success of A/R performance.

Conceptual Design of a Supersonic Business Jet Propulsion System

NASA Technical Reports Server (NTRS)

Bruckner, Robert J.

2002-01-01

NASA's Ultra-Efficient Engine Technology Program (UEETP) is developing a suite of technology to enhance the performance of future aircraft propulsion systems. Areas of focus for this suite of technology include: Highly Loaded Turbomachinery, Emissions Reduction, Materials and Structures, Controls, and Propulsion-Airframe Integration. The two major goals of the UEETP are emissions reduction of both landing and take-off nitrogen oxides (LTO-NO(x)) and mission carbon dioxide (CO2) through fuel burn reductions. The specific goals include a 70 percent reduction in the current LTO-NO(x) rule and an 8 percent reduction in mission CO2 emissions. In order to gain insight into the potential applications and benefits of these technologies on future aircraft, a set of representative flight vehicles was selected for systems level conceptual studies. The Supersonic Business Jet (SBJ) is one of these vehicles. The particular SBJ considered in this study has a capacity of 6 passengers, cruise Mach Number of 2.0, and a range of 4,000 nautical miles. Without the current existence of an SBJ the study of this vehicle requires a two-phased approach. Initially, a hypothetical baseline SBJ is designed which utilizes only current state of the art technology. Finally, an advanced SBJ propulsion system is designed and optimized which incorporates the advanced technologies under development within the UEETP. System benefits are then evaluated and compared to the program and design requirements. Although the program goals are only concerned with LTO-NO(x) and CO2 emissions, it is acknowledged that additional concerns for an SBJ include take-off noise, overland supersonic flight, and cruise NO(x) emissions at high altitudes. Propulsion system trade-offs in the conceptual design phase acknowledge these issues as well as the program goals. With the inclusion of UEETP technologies a propulsion system is designed which performs at 81% below the LTO-NO(x) rule, and reduces fuel burn by 23 percent compared to the current technology.

Anesthesiology and gastroenterology.

PubMed

de Villiers, Willem J S

2009-03-01

A successful population-based colorectal cancer screening requires efficient colonoscopy practices that incorporate high throughput, safety, and patient satisfaction. There are several different modalities of nonanesthesiologist-administered sedation currently available and in development that may fulfill these requirements. Modern-day gastroenterology endoscopic procedures are complex and demand the full attention of the attending gastroenterologist and the complete cooperation of the patient. Many of these procedures will also require the anesthesiologist's knowledge, skills, abilities, and experience to ensure optimal procedure results and good patient outcomes. The goal of this review is (1) to provide a gastroenterology perspective on the use of propofol in gastroenterology endoscopic practice, and (2) to describe newer GI endoscopy procedures that gastroenterologists perform that might involve anesthesiologists.

Objects Mediate Goal Integration in Ventrolateral Prefrontal Cortex during Action Observation

PubMed Central

Hrkać, Mari; Wurm, Moritz F.; Kühn, Anne B.; Schubotz, Ricarda I.

2015-01-01

Actions performed by others are mostly not observed in isolation, but embedded in sequences of actions tied together by an overarching goal. Therefore, preceding actions can modulate the observer's expectations in relation to the currently perceived action. Ventrolateral prefrontal cortex (vlPFC), and inferior frontal gyrus (IFG) in particular, is suggested to subserve the integration of episodic as well as semantic information and memory, including action scripts. The present fMRI study investigated if activation in IFG varies with the effort to integrate expected and observed action, even when not required by the task. During an fMRI session, participants were instructed to attend to short videos of single actions and to deliver a judgment about the actor’s current goal. We manipulated the strength of goal expectation induced by the preceding action, implementing the parameter "goal-relatedness" between the preceding and the currently observed action. Moreover, since objects point to the probability of certain actions, we also manipulated whether the current and the preceding action shared at least one object or not. We found an interaction between the two factors goal-relatedness and shared object: IFG activation increased the weaker the goal-relatedness between the preceding and the current action was, but only when they shared at least one object. Here, integration of successive action steps was triggered by the re-appearing (shared) object but hampered by a weak goal-relatedness between the actually observed manipulation. These findings foster the recently emerging view that IFG is enhanced by goal-related conflicts during action observation. PMID:26218102

Development of Academic Goal Orientation Inventory for Senior Secondary School Students of Kerala

ERIC Educational Resources Information Center

Gafoor, K. Abdul; Abidha, Kurukkan

2015-01-01

Research interest in achievement motivation and its correlates has grown in recent years. Though there are thousands of studies on goal orientation, the number of instruments to identify goal orientation based on four-fold model viz., performance approach goal orientation (PAP), performance avoidance goal orientation (PAV), mastery approach goal…

The effect of workshop groups on achievement goals and performance in biology: An outcome evaluation

NASA Astrophysics Data System (ADS)

Born, Wendi Kay

This two-year quasi-experiment evaluated the effect of peer-led workshop groups on performance of minority and majority undergraduate biology students in a three-course series and investigated motivational explanations for performance differences. The workshop intervention used was modeled after a program pioneered by Treisman (1992) at the University of California. Majority volunteers randomly assigned to workshops (n = 61) performed between 1/2 and 1 standard deviation better than those assigned to the control group (n = 60; p < .05) in each quarter without spending more time studying. During Quarter 1, workshop minority students (n = 25) showed a pattern of increasing exam performance in comparison to historic control minority students (n = 21), who showed a decreasing pattern (p < .05). Although sex differences in biology performance were a focus of investigation, none were detected. Motivational predictions derived from the hierarchical model of approach and avoidance achievement motivation (Elliot & Church, 1997) were partially supported. Self-report survey measures of achievement goals, modeled after those used by Elliot and colleagues, were requested from all enrolled students. Volunteers (n = 121) reported higher average levels of approach and avoidance goals than nonvolunteers (n = 439; p < .05) and the relationship of goals to performance was moderated by volunteer status. Performance of volunteers was negatively related to avoidance of failure goals (r = .41, p < .01) and unrelated to performance approach goals. Performance of nonvolunteers was unrelated to avoidance of failure goals and positively related to performance approach goals (r = .28, p < .01). Mastery goals were unrelated to performance for all students. Results were inconsistent with Dweck and Leggett's (1988) theory of mastery vs. performance orientation, but were similar to results found by Elliot and colleagues. Contrary to hypotheses, motivational goals did not mediate performance for any group of students. Results suggest that challenge interventions can be highly beneficial for both majority and minority participants and that institutions can promote excellence by incorporating workshop programs like the one described here. These interventions have been shown to be more effective and cost less than remedial interventions.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Noreen, D; LeChevalier, R; Choi, M

President Carter established a goal that would require installation of at least one million solar water heaters by 1985 and 20 million water-heating systems by the year 2000. The goals established require that the solar industry be sufficiently mature to provide cost-effective, reliable designs in the immediate future. The objective of this study was to provide the Department of Energy with quantified data that can be used to assess and redirect, if necessary, the program plans to assure compliance with the President's goals. Results deal with the product, the industry, the market, and the consumer. All issues are examined inmore » the framework of the conventional-hot-water industry. Based on the results of this solar hot water assessment study, there is documented proof that the solar industry is blessed with over 20 good solar hot water systems. A total of eight generic types are currently being produced, but a majority of the systems being sold are included in only five generic types. The good systems are well-packaged for quality, performance and installation ease. These leading systems are sized and designed to fit the requirements of the consumer in every respect. This delivery end also suffers from a lack of understanding of the best methods for selling the product. At the supplier end, there are problems also, including: some design deficiencies, improper materials selection and, occasionally, the improper selection of components and subsystems. These, in total, are not serious problems in the better systems and will be resolved as this industry matures.« less

Investigation of Propulsion System Requirements for Spartan Lite

NASA Technical Reports Server (NTRS)

Urban, Mike; Gruner, Timothy; Morrissey, James; Sneiderman, Gary

1998-01-01

This paper discusses the (chemical or electric) propulsion system requirements necessary to increase the Spartan Lite science mission lifetime to over a year. Spartan Lite is an extremely low-cost (less than 10 M) spacecraft bus being developed at the NASA Goddard Space Flight Center to accommodate sounding rocket class (40 W, 45 kg, 35 cm dia by 1 m length) payloads. While Spartan Lite is compatible with expendable launch vehicles, most missions are expected to be tertiary payloads deployed by. the Space Shuttle. To achieve a one year or longer mission life from typical Shuttle orbits, some form of propulsion system is required. Chemical propulsion systems (characterized by high thrust impulsive maneuvers) and electrical propulsion systems (characterized by low-thrust long duration maneuvers and the additional requirement for electrical power) are discussed. The performance of the Spartan Lite attitude control system in the presence of large disturbance torques is evaluated using the Trectops(Tm) dynamic simulator. This paper discusses the performance goals and resource constraints for candidate Spartan Lite propulsion systems and uses them to specify quantitative requirements against which the systems are evaluated.

Trajectory Design for the Microwave Anisotropy Probe (MAP)

NASA Technical Reports Server (NTRS)

Newman, Lauri Kraft; Rohrbaugh, David; Bauer, Frank H. (Technical Monitor)

2001-01-01

The Microwave Anisotropy, Probe (MAP) is a Medium Class Explorers (MIDEX) Mission produced in partnership between Goddard Space Flight Center (GSFC) and Princeton University. The goal of the MAP mission is to produce an accurate fill-sky, map of the cosmic microwave background temperature fluctuations (anisotropy). The mission orbit is a Lissajous orbit about the L(sub 2) Sun-Earth Lagrange point. The trajectory design for MAP is complex, having many requirements that must be met including shadow avoidance, sun angle constraints, Lissqjous size and shape characteristics, and limited Delta-V budget. In order to find a trajectory that met the design requirements for the entire 4-year mission lifetime goal, GSFC Flight Dynamics engineers performed many analyses, the results of which are presented herein. The paper discusses the preliminary trade-offs to establish a baseline trajectory, analysis to establish the nominal daily trajectory, and the launch window determination to widen the opportunity from instantaneous to several minutes for each launch date.

Field-Sequential Electronic Stereoscopic Projector

NASA Astrophysics Data System (ADS)

Lipton, Lenny

1989-07-01

Culminating a research and development project spanning many years, StereoGraphics Corporation has succeeded in bringing to market the first field-sequential electronic stereoscopic projector. The product is based on a modification of Electrohome and Barco projectors. Our design goal was to produce a projector capable of displaying an image on a six-foot (or larger) diagonal screen for an audience of 50 or 60 people, or for an individual using a simulator. A second goal was to produce an image that required only passive polarizing glasses rather than powered, tethered visors. Two major design challenges posed themselves. First, it was necessary to create an electro-optical modulator which could switch the characteristic of polarized light at field rate, and second, it was necessary to produce a bright green CRT with short persistence to prevent crosstalk between left and right fields. To solve the first problem, development was undertaken to produce the required electro-optical modulator. The second problem was solved with the help of a vendor specializing in high performance CRT's.

Fast and slow transitions in frontal ensemble activity during flexible sensorimotor behavior.

PubMed

Siniscalchi, Michael J; Phoumthipphavong, Victoria; Ali, Farhan; Lozano, Marc; Kwan, Alex C

2016-09-01

The ability to shift between repetitive and goal-directed actions is a hallmark of cognitive control. Previous studies have reported that adaptive shifts in behavior are accompanied by changes of neural activity in frontal cortex. However, neural and behavioral adaptations can occur at multiple time scales, and their relationship remains poorly defined. Here we developed an adaptive sensorimotor decision-making task for head-fixed mice, requiring them to shift flexibly between multiple auditory-motor mappings. Two-photon calcium imaging of secondary motor cortex (M2) revealed different ensemble activity states for each mapping. When adapting to a conditional mapping, transitions in ensemble activity were abrupt and occurred before the recovery of behavioral performance. By contrast, gradual and delayed transitions accompanied shifts toward repetitive responding. These results demonstrate distinct ensemble signatures associated with the start versus end of sensory-guided behavior and suggest that M2 leads in engaging goal-directed response strategies that require sensorimotor associations.

Monitoring asthma in childhood: symptoms, exacerbations and quality of life.

PubMed

Brand, Paul L P; Mäkelä, Mika J; Szefler, Stanley J; Frischer, Thomas; Price, David

2015-06-01

Monitoring asthma in children in clinical practice is primarily performed by reviewing disease activity (daytime and night-time symptoms, use of reliever medication, exacerbations requiring frequent use of reliever medication and urgent visits to the healthcare professional) and the impact of the disease on children's daily activities, including sports and play, in a clinical interview. In such an interview, most task force members also discuss adherence to maintenance therapy and the patients' (and parents') views and beliefs on the goals of treatment and the amount of treatment required to achieve those goals. Composite asthma control and quality of life measures, although potentially useful in research, have limited value in clinical practice because they have a short recall window and do not cover the entire spectrum of asthma control. Telemonitoring of children with asthma cannot replace face-to-face follow-up and monitoring because there is no evidence that it is associated with improved health outcomes. Copyright ©ERS 2015.

Methodology development for evaluation of selective-fidelity rotorcraft simulation

NASA Technical Reports Server (NTRS)

Lewis, William D.; Schrage, D. P.; Prasad, J. V. R.; Wolfe, Daniel

1992-01-01

This paper addressed the initial step toward the goal of establishing performance and handling qualities acceptance criteria for realtime rotorcraft simulators through a planned research effort to quantify the system capabilities of 'selective fidelity' simulators. Within this framework the simulator is then classified based on the required task. The simulator is evaluated by separating the various subsystems (visual, motion, etc.) and applying corresponding fidelity constants based on the specific task. This methodology not only provides an assessment technique, but also provides a technique to determine the required levels of subsystem fidelity for a specific task.

Research requirements for development of improved helicopter rotor efficiency

NASA Technical Reports Server (NTRS)

Davis, S. J.

1976-01-01

The research requirements for developing an improved-efficiency rotor for a civil helicopter are documented. The various design parameters affecting the hover and cruise efficiency of a rotor are surveyed, and the parameters capable of producing the greatest potential improvement are identified. Research and development programs to achieve these improvements are defined, and estimated costs and schedules are presented. Interaction of the improved efficiency rotor with other technological goals for an advanced civil helicopter is noted, including its impact on engine noise, hover and cruise performance, one-engine-inoperative hover capability, and maintenance and reliability.

Electrical insulation design requirements and reliability goals

NASA Astrophysics Data System (ADS)

Ross, R. G., Jr.

1983-11-01

The solar cells in a photovoltaic module which must be electrically isolated from module exterior surfaces to satisfy a variety of safety and operating considerations are discussed. The performance and reliability of the insulation system are examined. Technical requirements involve the capability of withstanding the differential voltage from the solar cells to the module frame. The maximum system voltage includes consideration of maximum open circuit array voltages achieved under low-temperature, high-irradiance conditions, and transient overvoltages due to system feedback of lightning transients. The latter is bounded by the characteristics of incorporated voltage limiting devices such as MOVs.

NASA Year 2000 (Y2K) Program Plan

NASA Technical Reports Server (NTRS)

1998-01-01

NASA initiated the Year 2000 (Y2K) program in August 1996 to address the challenges imposed on Agency software, hardware, and firmware systems by the new millennium. The Agency program is centrally managed by the NASA Chief Information Officer, with decentralized execution of program requirements at each of the nine NASA Centers, Headquarters and the Jet Propulsion Laboratory. The purpose of this Program Plan is to establish Program objectives and performance goals; identify Program requirements; describe the management structure; and detail Program resources, schedules, and controls. Project plans are established for each NASA Center, Headquarters, and the Jet Propulsion Laboratory.

Earth-orbit mission considerations and Space Tug requirements.

NASA Technical Reports Server (NTRS)

Huber, W. G.

1973-01-01

The reusable Space Tug is a major system planned to augment the Space Shuttle's capability to deliver, retrieve, and support automated payloads. The Space Tug will be designed to perform round-trip missions from low earth orbit to geosynchronous orbit. Space Tug goals and requirements are discussed together with the characteristics of the full capability Tug. The Tug is to be operated in an unmanned 'teleoperator' fashion. Details of potential teleoperator applications are considered, giving attention to related systems studies, candidate Tug mission applications, Tug 'end-effector' alternatives, technical issues associated with Tug payload retrieval, and Tug/payload accommodations.

Xenia Spacecraft Study

NASA Technical Reports Server (NTRS)

Hopkins, Randy

2009-01-01

This slide presentation reviews the proposed design for the Xenia mission spacecraft. The goal of this study is to perform a mission concept study for the mission. Included in this study are: the overall ground rules and assumptions (GR&A), a mission analysis, the configuration, the mass properties, the guidance, Navigation and control, the proposed avionics, the power system, the thermal protection system, the propulsion system, and the proposed structures. Conclusions from the study indicate that the observatory fits within the Falcon 9 mass and volume envelope for launching from Omelek, the pointing, slow slewing, and fast slewing requirements and the thermal requirements are met.

Drag-Free Performance of the ST7 Disturbance Reduction System Flight Experiment on the LISA Pathfinder

NASA Technical Reports Server (NTRS)

Maghami, Peiman; O'Donnell, James, Jr.; Hsu, Oscar; Ziemer, John; Dunn, Charles

2017-01-01

The Space Technology-7 Disturbance Reduction System (DRS) is an experiment package aboard the European Space Agency (ESA) LISA Pathfinder spacecraft. LISA Pathfinder launched from Kourou, French Guiana on December 3, 2015. The DRS is tasked to validate two specific technologies: colloidal micro-Newton thrusters (CMNT) to provide low-noise control capability of the spacecraft, and drag-free control flight. This validation is performed using highly sensitive drag-free sensors, which are provided by the LISA Technology Package of the European Space Agency. The Disturbance Reduction System is required to maintain the spacecrafts position with respect to a free-floating test mass to better than 10nmHz, along its sensitive axis (axis in optical metrology). It also has a goal of limiting the residual accelerations of any of the two test masses to below 30 (1 + [f3 mHz]) fmsHz, over the frequency range of 1 to 30 mHz.This paper briefly describes the design and the expected on-orbit performance of the control system for the two modes wherein the drag-free performance requirements are verified. The on-orbit performance of these modes are then compared to the requirements, as well as to the expected performance, and discussed.

Performance and results of the LBNE 35 ton membrane cryostat prototype

DOE PAGES

Montanari, David; Adamowski, Mark; Hahn, Alan; ...

2015-07-15

We report on the performance and commissioning of the first membrane cryostat to be used for scientific application. The Long Baseline Neutrino Experiment (LBNE) has designed and fabricated a membrane cryostat prototype in collaboration with Ishikawajima-Harima Heavy Industries Co., Ltd. (IHI). LBNE has designed and fabricated the supporting cryogenic system infrastructure and successfully commissioned and operated the first membrane cryostat. Original goals of the prototype are: to demonstrate the membrane cryostat technology in terms of thermal performance, feasibility for liquid argon and leak tightness; to demonstrate that we can remove all the impurities from the vessel and achieve the puritymore » requirements in a membrane cryostat without evacuation; to demonstrate that we can achieve and maintain the purity requirements of the liquid argon using mol sieve and copper filters. The purity requirements of a large liquid argon detector such as LBNE are contaminants below 200 parts per trillion (ppt) oxygen equivalent. LBNE is planning the design and construction of a large liquid argon detector. This presentation will present requirements, design and construction of the LBNE 35 ton membrane cryostat prototype, and detail the commissioning and performance. The experience and results of this prototype are extremely important for the development of the LBNE detector.« less

Effects of specified performance criterion and performance feedback on staff behavior: a component analysis.

PubMed

Hardesty, Samantha L; Hagopian, Louis P; McIvor, Melissa M; Wagner, Leaora L; Sigurdsson, Sigurdur O; Bowman, Lynn G

2014-09-01

The present study isolated the effects of frequently used staff training intervention components to increase communication between direct care staff and clinicians working on an inpatient behavioral unit. Written "protocol review" quizzes developed by clinicians were designed to assess knowledge about a patient's behavioral protocols. Direct care staff completed these at the beginning of each day and evening shift. Clinicians were required to score and discuss these protocol reviews with direct care staff for at least 75% of shifts over a 2-week period. During baseline, only 21% of clinicians met this requirement. Completing and scoring of protocol reviews did not improve following additional in-service training (M = 15%) or following an intervention aimed at decreasing response effort combined with prompting (M = 28%). After implementing an intervention involving specified performance criterion and performance feedback, 86% of clinicians reached the established goal. Results of a component analysis suggested that the presentation of both the specified performance criterion and supporting contingencies was necessary to maintain acceptable levels of performance. © The Author(s) 2014.

National Aeronautics and Space Administration fundamental research program. Information utilization and evaluation, appendices

NASA Technical Reports Server (NTRS)

Estes, J. E.; Eisgruber, L.

1981-01-01

Important points presented and recommendations made at an information and decision processes workshop held in Asilomar, California; at a data and information performance workshop held in Houston, Texas; and at a data base use and management workshop held near San Jose, California are summarized. Issues raised at a special session of the Soil Conservation Society of America's remote sensing for resource management conference in Kansas City, Missouri are also highlighted. The goals, status and activities of the NASA program definition study of basic research requirements, the necessity of making the computer science community aware of user needs with respect to information related to renewable resources, performance parameters and criteria for judging federal information systems, and the requirements and characteristics of scientific data bases are among the topics reported.

Age dependence of Olympic weightlifting ability.

PubMed

Meltzer, D E

1994-08-01

There is increasing interest among Masters athletes in standards for comparing performances of competitors of different ages. The goal of this study was to develop one such age-comparison method by examining the age dependence of ability in Olympic-style weightlifting. Previous research on the deterioration of muscular strength and power with increasing age offers only limited guidance toward this goal; therefore, analysis of performance data was required. The variation of weightlifting ability as a function of age was examined by two different methods. First, cross-sectional data corresponding to two separate populations of Masters weightlifters were analyzed in detail. Then, a longitudinal study of 64 U.S. male Masters weightlifters was carried out, with performance versus age curves resulting from the two methods were very similar, reflecting approximately 1.0-1.5% x yr-1 deterioration rates. These curves were characterized by common features regarding the rate of decline of muscular power with increasing age, in apparent agreement with published data regarding Masters sprinters and jumpers. We tentatively conclude that Olympic weightlifting ability in trained subjects undergoes a nonlinear decline with age, in which the second derivative of the performance versus age curve repeatedly changes sign.

Modeling effects of intrinsic and extrinsic rewards on the competition between striatal learning systems.

PubMed

Boedecker, Joschka; Lampe, Thomas; Riedmiller, Martin

2013-01-01

A common assumption in psychology, economics, and other fields holds that higher performance will result if extrinsic rewards (such as money) are offered as an incentive. While this principle seems to work well for tasks that require the execution of the same sequence of steps over and over, with little uncertainty about the process, in other cases, especially where creative problem solving is required due to the difficulty in finding the optimal sequence of actions, external rewards can actually be detrimental to task performance. Furthermore, they have the potential to undermine intrinsic motivation to do an otherwise interesting activity. In this work, we extend a computational model of the dorsomedial and dorsolateral striatal reinforcement learning systems to account for the effects of extrinsic and intrinsic rewards. The model assumes that the brain employs both a goal-directed and a habitual learning system, and competition between both is based on the trade-off between the cost of the reasoning process and value of information. The goal-directed system elicits internal rewards when its models of the environment improve, while the habitual system, being model-free, does not. Our results account for the phenomena that initial extrinsic reward leads to reduced activity after extinction compared to the case without any initial extrinsic rewards, and that performance in complex task settings drops when higher external rewards are promised. We also test the hypothesis that external rewards bias the competition in favor of the computationally efficient, but cruder and less flexible habitual system, which can negatively influence intrinsic motivation and task performance in the class of tasks we consider.

An Ada inference engine for expert systems

NASA Technical Reports Server (NTRS)

Lavallee, David B.

1986-01-01

The purpose is to investigate the feasibility of using Ada for rule-based expert systems with real-time performance requirements. This includes exploring the Ada features which give improved performance to expert systems as well as optimizing the tradeoffs or workarounds that the use of Ada may require. A prototype inference engine was built using Ada, and rule firing rates in excess of 500 per second were demonstrated on a single MC68000 processor. The knowledge base uses a directed acyclic graph to represent production lines. The graph allows the use of AND, OR, and NOT logical operators. The inference engine uses a combination of both forward and backward chaining in order to reach goals as quickly as possible. Future efforts will include additional investigation of multiprocessing to improve performance and creating a user interface allowing rule input in an Ada-like syntax. Investigation of multitasking and alternate knowledge base representations will help to analyze some of the performance issues as they relate to larger problems.

Cognitive correlates of spatial navigation: Associations between executive functioning and the virtual Morris Water Task.

PubMed

Korthauer, L E; Nowak, N T; Frahmand, M; Driscoll, I

2017-01-15

Although effective spatial navigation requires memory for objects and locations, navigating a novel environment may also require considerable executive resources. The present study investigated associations between performance on the virtual Morris Water Task (vMWT), an analog version of a nonhuman spatial navigation task, and neuropsychological tests of executive functioning and spatial performance in 75 healthy young adults. More effective vMWT performance (e.g., lower latency and distance to reach hidden platform, greater distance in goal quadrant on a probe trial, fewer path intersections) was associated with better verbal fluency, set switching, response inhibition, and ability to mentally rotate objects. Findings also support a male advantage in spatial navigation, with sex moderating several associations between vMWT performance and executive abilities. Overall, we report a robust relationship between executive functioning and navigational skill, with some evidence that men and women may differentially recruit cognitive abilities when navigating a novel environment. Copyright © 2016 Elsevier B.V. All rights reserved.

How to pass a sensor acceptance test: using the gap between acceptance criteria and operational performance

NASA Astrophysics Data System (ADS)

Bijl, Piet

2016-10-01

When acquiring a new imaging system and operational task performance is a critical factor for success, it is necessary to specify minimum acceptance requirements that need to be met using a sensor performance model and/or performance tests. Currently, there exist a variety of models and test from different origin (defense, security, road safety, optometry) and they all do different predictions. This study reviews a number of frequently used methods and shows the effects that small changes in procedure or threshold criteria can have on the outcome of a test. For example, a system may meet the acceptance requirements but not satisfy the needs for the operational task, or the choice of test may determine the rank order of candidate sensors. The goal of the paper is to make people aware of the pitfalls associated with the acquisition process, by i) illustrating potential tricks to have a system accepted that is actually not suited for the operational task, and ii) providing tips to avoid this unwanted situation.

Dynamic Effects of Performance-Avoidance Goal Orientation on Student Achievement in Language and Mathematics.

PubMed

Stamovlasis, Dimitrios; Gonida, Sofia-Eleftheria N

2018-07-01

The present study used achievement goal theory (AGT) as a theoretical framework and examined the role of mastery and performance goals, both performance-approach and performance-avoidance, on school achieve-ment within the nonlinear dynamical systems (NDS) perspective. A series of cusp catastrophe models were applied on students' achievement in a number of school subjects, such as mathematics and language for elementary school and algebra, geometry, ancient and modern Greek language for high school, using achievement goal orientations as control variables. The participants (N=224) were students attending fifth and eighth grade (aged 11 and 14, respectively) in public schools located in northern Greece. Cusp analysis based on the probability density function was carried out by two procedures, the maximum likelihood and the least squares. The results showed that performance-approach goals had no linear effect on achievement, while the cusp models implementing mastery goals as the asymmetry factor and performance-avoidance as the bifurcation, proved superior to their linear alternatives. The results of the study based on NDS support the multiple goal perspective within AGT. Theoretical issues, educational implications and future directions are discussed.

Perceived Competence Moderates the Relation between Performance-Approach and Performance-Avoidance Goals

ERIC Educational Resources Information Center

Law, Wilbert; Elliot, Andrew J.; Murayama, Kou

2012-01-01

In the present research, we conducted 4 studies designed to examine the hypothesis that perceived competence moderates the relation between performance-approach and performance-avoidance goals. Each study yielded supportive data, indicating that the correlation between the 2 goals is lower when perceived competence is high. This pattern was…

Identifying and Assessing Interaction Knowledge, Skills, and Attributes for Future Force Soldiers

DTIC Science & Technology

2007-05-01

Research Institute for the Behavioral and Social Sciences (ARI) SBIR request, the Army Interpersonal Skills Assessment ( AISA ) battery consists of five...Army evolves over the coming years, Soldiers will be placed in positions that require increasing interaction effectiveness. The goal of the AISA is...effective interpersonal KSAs may improve performance. In Phase II of this SBIR effort, the AISA battery underwent a full development cycle

Material Stream Strategy for Lithium and Inorganics (U)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Safarik, Douglas Joseph; Dunn, Paul Stanton; Korzekwa, Deniece Rochelle

Design Agency Responsibilities: Manufacturing Support to meet Stockpile Stewardship goals for maintaining the nuclear stockpile through experimental and predictive modeling capability. Development and maintenance of Manufacturing Science expertise to assess material specifications and performance boundaries, and their relationship to processing parameters. Production Engineering Evaluations with competence in design requirements, material specifications, and manufacturing controls. Maintenance and enhancement of Aging Science expertise to support Stockpile Stewardship predictive science capability.

Public reporting needed to improve the health of Tennesseans.

PubMed

Bailey, James E; Gibson, Deborah

2005-11-01

Tennessee providers are recognizing an urgent need for a new and improved model of healthcare, characterized by transparent accountability to consumers. Meaningful health system improvements will require broad public disclosure of healthcare performance data at the hospital, clinic and community levels using nationally recognized standards. All Tennessee communities need a routine community health report card, to help their citizens to work together toward their most important health goals.

F-15 837 IFCS Intelligent Flight Control System Project

NASA Technical Reports Server (NTRS)

Bosworth, John T.

2007-01-01

This viewgraph presentation reviews the use of Intelligent Flight Control System (IFCS) for the F-15. The goals of the project are: (1) Demonstrate Revolutionary Control Approaches that can Efficiently Optimize Aircraft Performance in both Normal and Failure Conditions (2) Advance Neural Network-Based Flight Control Technology for New Aerospace Systems Designs. The motivation for the development are to reduce the chance and skill required for survival.

Conditioning Military Women for Optimal Performance: Effects of Contraceptive Use

DTIC Science & Technology

1998-10-01

illnesses (i.e. the common cold, sore throat, influenza, mononucleosis ) that afflict soldiers and athletes during physical training (52). The...goal: bring the number to 15 in each treatment group). Task 26: Submit final report when required. Task 27: Prepare abstracts for submission to...absence of any DEPO subjects, trends (and treatment effects) are impossible to discern. INF-g See Figure 8 (all experimental groups combined). This figure

Preliminary designs for 25 kWe advanced Stirling conversion systems for dish electric applications

NASA Technical Reports Server (NTRS)

Shaltens, Richard K.; Schreiber, Jeffrey G.

1990-01-01

Under the Department of Energy's (DOE) Solar Thermal Technology Program, Sandia National Laboratories is evaluating heat engines for terrestrial Solar Distributed Heat Receivers. The Stirling engine has been identified by Sandia as one of the most promising engines for terrestrial applications. The Stirling engine also has the potential to meet DOE's performance and cost goals. The NASA Lewis Research Center is conducting Stirling engine technology development activities directed toward a dynamic power source for space applications. Space power systems requirements include high reliability, very long life, low vibration and high efficiency. The free-piston Stirling engine has the potential for future high power space conversion systems, either nuclear or solar powered. Although both applications appear to be quite different, their requirements complement each other. Preliminary designs feature a free-piston Stirling engine, a liquid metal heat transport system, and a means to provide nominally 25 kW electric power to a utility grid while meeting DOE's performance and long term cost goals. The Cummins design incorporates a linear alternator to provide the electrical output, while the STC design generates electrical power indirectly through a hydraulic pump/motor coupled to an induction generator. Both designs for the ASCS's will use technology which can reasonably be expected to be available in the early 1990's.

Preliminary designs for 25 kWe advanced Stirling conversion systems for dish electric applications

NASA Astrophysics Data System (ADS)

Shaltens, Richard K.; Schreiber, Jeffrey G.

Under the Department of Energy's (DOE) Solar Thermal Technology Program, Sandia National Laboratories is evaluating heat engines for terrestrial Solar Distributed Heat Receivers. The Stirling engine has been identified by Sandia as one of the most promising engines for terrestrial applications. The Stirling engine also has the potential to meet DOE's performance and cost goals. The NASA Lewis Research Center is conducting Stirling engine technology development activities directed toward a dynamic power source for space applications. Space power systems requirements include high reliability, very long life, low vibration and high efficiency. The free-piston Stirling engine has the potential for future high power space conversion systems, either nuclear or solar powered. Although both applications appear to be quite different, their requirements complement each other. Preliminary designs feature a free-piston Stirling engine, a liquid metal heat transport system, and a means to provide nominally 25 kW electric power to a utility grid while meeting DOE's performance and long term cost goals. The Cummins design incorporates a linear alternator to provide the electrical output, while the STC design generates electrical power indirectly through a hydraulic pump/motor coupled to an induction generator. Both designs for the ASCS's will use technology which can reasonably be expected to be available in the early 1990's.

Preliminary designs for 25 kWe advanced Stirling conversion systems for dish electric applications

NASA Technical Reports Server (NTRS)

Shaltens, Richard K.; Schreiber, Jeffrey G.

1990-01-01

Under the Department of Energy's (DOE) Solar Thermal Technology Program, Sandia National Laboratories is evaluating heat engines for terrestrial Solar Distributed Heat Receivers. The Stirling engine has been identified by Sandia as one of the most promising engines for terrestrial applications. The Stirling engine also has the potential to meet DOE's performance and cost goals. The NASA Lewis Research Center is conducting Stirling engine technology development activities directed toward a dynamic power source for space applications. Space power systems requirements include high reliability, very long life, low vibration and high efficiency. The free-piston Stirling engine has the potential for future high power space conversion systems, either nuclear or solar powered. Although both applications appear to be quite different, their requirements complement each other. Preliminary designs feature a free-piston Stirling engine, a liquid metal heat transport system, and a means to provide nominally 25 kW electric power to a utility grid while meeting DOE's performance and long term cost goals. The Cummins design incorporates a linear alternator to provide the electrical output, while the STC design generates electrical power indirectly through a hydraulic pump/motor coupled to an induction generator. Both designs for the ASCS's will use technology which can reasonably be expected to be available in the early 1990's

GPS-Based Precision Orbit Determination for a New Era of Altimeter Satellites: Jason-1 and ICESat

NASA Technical Reports Server (NTRS)

Luthcke, Scott B.; Rowlands, David D.; Lemoine, Frank G.; Zelensky, Nikita P.; Williams, Teresa A.

2003-01-01

Accurate positioning of the satellite center of mass is necessary in meeting an altimeter mission's science goals. The fundamental science observation is an altimetric derived topographic height. Errors in positioning the satellite's center of mass directly impact this fundamental observation. Therefore, orbit error is a critical Component in the error budget of altimeter satellites. With the launch of the Jason-1 radar altimeter (Dec. 2001) and the ICESat laser altimeter (Jan. 2003) a new era of satellite altimetry has begun. Both missions pose several challenges for precision orbit determination (POD). The Jason-1 radial orbit accuracy goal is 1 cm, while ICESat (600 km) at a much lower altitude than Jason-1 (1300 km), has a radial orbit accuracy requirement of less than 5 cm. Fortunately, Jason-1 and ICESat POD can rely on near continuous tracking data from the dual frequency codeless BlackJack GPS receiver and Satellite Laser Ranging. Analysis of current GPS-based solution performance indicates the l-cm radial orbit accuracy goal is being met for Jason-1, while radial orbit accuracy for ICESat is well below the 54x1 mission requirement. A brief overview of the GPS precision orbit determination methodology and results for both Jason-1 and ICESat are presented.

Perceptions of competence, implicit theory of ability, perception of motivational climate, and achievement goals: a test of the trichotomous conceptualization of endorsement of achievement motivation in the physical education setting.

PubMed

Cury, F; Da Fonséca, D; Rufo, M; Sarrazin, P

2002-08-01

To test and extend the conceptualization of the endorsement of achievement goals in the physical education setting Mastery, Performance-approach, and Performance-approach goals, Perception of the physical education competence, Implicit theory about sport ability, and Perception of the motivational climate were assessed among 682 boys attending five French schools. Analysis indicated that (1) Performance-approach goals were positively associated with perception of physical education Competence, Entity beliefs about sport ability, the Performance dimension of the motivational climate, and negatively associated with Incremental beliefs about sport ability. (2) Mastery goals were positively associated with perception of physical education Competence, Incremental beliefs about sport ability, the Mastery dimension of the motivational climate, and negatively associated with the Performance dimension of the motivational climate. Also, (3) Performance-avoidance goals were positively associated with Entity beliefs about sport ability and the Performance dimension of the motivational climate; these goals were negatively associated with Incremental beliefs about sport ability and perception of physical education Competence. These results clearly attested to the validity of the trichotomous model in the physical education setting.

Using goal setting and feedback to increase weekly running distance.

PubMed

Wack, Stephanie R; Crosland, Kimberly A; Miltenberger, Raymond G

2014-01-01

We evaluated goal setting with performance feedback to increase running distance among 5 healthy adults. Participants set a short-term goal each week and a long-term goal to achieve on completion of the study. Results demonstrated that goal setting and performance feedback increased running distance for all participants. © Society for the Experimental Analysis of Behavior.

Update on Risk Reduction Activities for a Liquid Advanced Booster for NASA's Space Launch System

NASA Technical Reports Server (NTRS)

Crocker, Andrew M.; Greene, William D.

2017-01-01

The stated goals of NASA's Research Announcement for the Space Launch System (SLS) Advanced Booster Engineering Demonstration and/or Risk Reduction (ABEDRR) are to reduce risks leading to an affordable Advanced Booster that meets the evolved capabilities of SLS and enable competition by mitigating targeted Advanced Booster risks to enhance SLS affordability. Dynetics, Inc. and Aerojet Rocketdyne (AR) formed a team to offer a wide-ranging set of risk reduction activities and full-scale, system-level demonstrations that support NASA's ABEDRR goals. During the ABEDRR effort, the Dynetics Team has modified flight-proven Apollo-Saturn F-1 engine components and subsystems to improve affordability and reliability (e.g., reduce parts counts, touch labor, or use lower cost manufacturing processes and materials). The team has built hardware to validate production costs and completed tests to demonstrate it can meet performance requirements. State-of-the-art manufacturing and processing techniques have been applied to the heritage F-1, resulting in a low recurring cost engine while retaining the benefits of Apollo-era experience. NASA test facilities have been used to perform low-cost risk-reduction engine testing. In early 2014, NASA and the Dynetics Team agreed to move additional large liquid oxygen/kerosene engine work under Dynetics' ABEDRR contract. Also led by AR, the objectives of this work are to demonstrate combustion stability and measure performance of a 500,000 lbf class Oxidizer-Rich Staged Combustion (ORSC) cycle main injector. A trade study was completed to investigate the feasibility, cost effectiveness, and technical maturity of a domestically-produced engine that could potentially both replace the RD-180 on Atlas V and satisfy NASA SLS payload-to-orbit requirements via an advanced booster application. Engine physical dimensions and performance parameters resulting from this study provide the system level requirements for the ORSC risk reduction test article. The test article is scheduled to complete fabrication and assembly soon and continue testing through late 2019. Dynetics has also designed, developed, and built innovative tank and structure assemblies using friction stir welding to leverage recent NASA investments in manufacturing tools, facilities, and processes, significantly reducing development and recurring costs. The full-scale cryotank assembly was used to verify the structural design and prove affordable processes. Dynetics performed hydrostatic and cryothermal proof tests on the assembly to verify the assembly meets performance requirements..

Effects of Goal Relations on Self-Regulated Learning in Multiple Goal Pursuits: Performance, the Self-Regulatory Process, and Task Enjoyment

ERIC Educational Resources Information Center

Lee, Hyunjoo

2012-01-01

The purpose of this study was to investigate the effects of goal relations on self-regulation in the pursuit of multiple goals, focusing on self-regulated performance, the self-regulatory process, and task enjoyment. The effect of multiple goal relations on self-regulation was explored in a set of three studies. Goal relations were divided into…

Individual Markers of Resilience in Train Traffic Control: The Role of Operators' Goals and Strategic Mental Models and Implications for Variation, Expertise, and Performance.

PubMed

Lo, Julia C; Pluyter, Kari R; Meijer, Sebastiaan A

2016-02-01

The aim of this study was to examine individual markers of resilience and obtain quantitative insights into the understanding and the implications of variation and expertise levels in train traffic operators' goals and strategic mental models and their impact on performance. The Dutch railways are one of the world's most heavy utilized railway networks and have been identified to be weak in system and organizational resilience. Twenty-two train traffic controllers enacted two scenarios in a human-in-the-loop simulator. Their experience, goals, strategic mental models, and performance were assessed through questionnaires and simulator logs. Goals were operationalized through performance indicators and strategic mental models through train completion strategies. A variation was found between operators for both self-reported primary performance indicators and completion strategies. Further, the primary goal of only 14% of the operators reflected the primary organizational goal (i.e., arrival punctuality). An incongruence was also found between train traffic controllers' self-reported performance indicators and objective performance in a more disrupted condition. The level of experience tends to affect performance differently. There is a gap between primary organizational goals and preferred individual goals. Further, the relative strong diversity in primary operator goals and strategic mental models indicates weak resilience at the individual level. With recent and upcoming large-scale changes throughout the sociotechnical space of the railway infrastructure organization, the findings are useful to facilitate future railway traffic control and the development of a resilient system. © 2015, Human Factors and Ergonomics Society.

Requirements for data integration platforms in biomedical research networks: a reference model.

PubMed

Ganzinger, Matthias; Knaup, Petra

2015-01-01

Biomedical research networks need to integrate research data among their members and with external partners. To support such data sharing activities, an adequate information technology infrastructure is necessary. To facilitate the establishment of such an infrastructure, we developed a reference model for the requirements. The reference model consists of five reference goals and 15 reference requirements. Using the Unified Modeling Language, the goals and requirements are set into relation to each other. In addition, all goals and requirements are described textually in tables. This reference model can be used by research networks as a basis for a resource efficient acquisition of their project specific requirements. Furthermore, a concrete instance of the reference model is described for a research network on liver cancer. The reference model is transferred into a requirements model of the specific network. Based on this concrete requirements model, a service-oriented information technology architecture is derived and also described in this paper.

Detrimental Effects of “Stretch” Goals in Specialty Substance Use Disorder Treatment Organizations

PubMed Central

Lemoine, G. James; Blum, Terry C.; Roman, Paul M.

2016-01-01

Background “Stretch” goals, a rarely examined concept that represents seemingly impossible, highly ambitious organizational goals ostensibly established to fill performance gaps and motivate employees, are examined within a sample of substance use disorder (SUD) treatment centers in the United States in terms of their prevalence and effects on organizational behavior. Stretch goals are defined as “seemingly impossible” goals intended to motivate employees to achieve high performance. In light of the high level of environmental change and unpredictability faced by SUD treatment centers in recent decades, we theorize that stretch goals would be both common and often detrimental (in terms of capacity utilization rate and efficiency) in these settings. Methods In a longitudinal analysis of data from leaders of a representative U. S. national sample of 219 SUD treatment centers characterized by entrepreneurial management structures, we examined the prevalence of stretch goals and their impact on key outcome variables of capacity utilization rate and efficiency. Results Widespread adoption of stretch goals was found, with 43% of our sample falling within the stretch category. Stretch goals had a negative main effect on capacity utilization rate as compared to less ambitious challenging goals. Stretch and prior performance interacted to further predict capacity utilization rate, whereas stretch and slack resource availability interacted to predict center efficiency. Discussion Although stretch goals are frequently used in the SUD treatment industry, we find them mostly detrimental to performance. Stretch goals may enhance the efficiency of treatment centers with prior limited resource availability, but they are negatively associated with capacity utilization, especially in centers with a record of already strong performance. Despite the high prevalence of such goals and positive values centered on aspirational behavior, these results strongly suggest caution in such goal setting in SUD treatment centers. PMID:26976811

The effects of goal setting on rugby performance.

PubMed

Mellalieu, Stephen D; Hanton, Sheldon; O'Brien, Michael

2006-01-01

Goal-setting effects on selected performance behaviors of 5 collegiate rugby players were assessed over an entire competitive season using self-generated targets and goal-attainment scaling. Results suggest that goal setting was effective for enhancing task-specific on-field behavior in rugby union.

Nutritional management of replacement sheep utilizing southern forages: a review.

PubMed

Chappell, G L

1993-11-01

Intensive sheep production systems seem to be an appropriate means of fully using the available resources, particularly the forages, of the southern region. In such systems, ewes should lamb first at approximately 1 yr of age. Programs to accomplish this goal must be well-planned and carefully integrated and executed. The primary goal is to achieve two-thirds of the ewe's projected mature weight before exposure for breeding. General management must reduce heat stress and parasitism. Forage quality must be maintained at a level consistent with National Research Council requirements for energy and protein. Protein is not normally a limiting factor. Energy supplementation and grazing pressure can be used to maintain growth without over-condition, which reduces subsequent performance.

Development of tritium permeation barriers on Al base in Europe

NASA Astrophysics Data System (ADS)

Benamati, G.; Chabrol, C.; Perujo, A.; Rigal, E.; Glasbrenner, H.

The development of the water cooled lithium lead (WCLL) DEMO fusion reactor requires the production of a material capable of acting as a tritium permeation barrier (TPB). In the DEMO blanket reactor permeation barriers on the structural material are required to reduce the tritium permeation from the Pb-17Li or the plasma into the cooling water to acceptable levels (<1 g/d). Because of experimental work previously performed, one of the most promising TPB candidates is A1 base coatings. Within the EU a large R&D programme is in progress to develop a TPB fabrication technique, compatible with the structural materials requirements and capable of producing coatings with acceptable performances. The research is focused on chemical vapour deposition (CVD), hot dipping, hot isostatic pressing (HIP) technology and spray (this one developed also for repair) deposition techniques. The final goal is to select a reference technique to be used in the blanket of the DEMO reactor and in the ITER test module fabrication. The activities performed in four European laboratories are summarised here.

Concepts for on-board satellite image registration, volume 1

NASA Technical Reports Server (NTRS)

Ruedger, W. H.; Daluge, D. R.; Aanstoos, J. V.

1980-01-01

The NASA-NEEDS program goals present a requirement for on-board signal processing to achieve user-compatible, information-adaptive data acquisition. One very specific area of interest is the preprocessing required to register imaging sensor data which have been distorted by anomalies in subsatellite-point position and/or attitude control. The concepts and considerations involved in using state-of-the-art positioning systems such as the Global Positioning System (GPS) in concert with state-of-the-art attitude stabilization and/or determination systems to provide the required registration accuracy are discussed with emphasis on assessing the accuracy to which a given image picture element can be located and identified, determining those algorithms required to augment the registration procedure and evaluating the technology impact on performing these procedures on-board the satellite.

Space station human productivity study, volume 1

NASA Technical Reports Server (NTRS)

1985-01-01

The primary goal was to develop design and operations requirements for direct support of intra-vehicular activity (IVA) crew performance and productivity. It was recognized that much work had already been accomplished which provided sufficient data for the definition of the desired requirements. It was necessary, therefore, to assess the status of such data to extract definable requirements, and then to define the remaining study needs. The explicit objectives of the study were to: review existing data to identify potential problems of space station crew productivity and to define requirements for support of productivity insofar as they could be justified by current information; identify those areas that lack adequate data; and prepare plans for managing studies to develop the lacking data, so that results can be input to the space station program in a timely manner.

78 FR 17204 - Pesticide Reregistration Performance Measures and Goals; Annual Progress Report; Notice of...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-20

... ENVIRONMENTAL PROTECTION AGENCY [EPA-HQ-OPP-2012-0938; FRL-9374-7] Pesticide Reregistration Performance Measures and Goals; Annual Progress Report; Notice of Availability AGENCY: Environmental... EPA's progress report in meeting its performance measures and goals for pesticide reregistration...

77 FR 19662 - Pesticide Reregistration Performance Measures and Goals; Annual Progress Report; Notice of...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-02

... ENVIRONMENTAL PROTECTION AGENCY [EPA-HQ-OPP-2011-0959; FRL-9343-5] Pesticide Reregistration Performance Measures and Goals; Annual Progress Report; Notice of Availability AGENCY: Environmental... EPA's progress report in meeting its performance measures and goals for pesticide reregistration...

Lithium-Ion Batteries for Aerospace Applications

NASA Technical Reports Server (NTRS)

Surampudi, S.; Halpert, G.; Marsh, R. A.; James, R.

1999-01-01

This presentation reviews: (1) the goals and objectives, (2) the NASA and Airforce requirements, (3) the potential near term missions, (4) management approach, (5) the technical approach and (6) the program road map. The objectives of the program include: (1) develop high specific energy and long life lithium ion cells and smart batteries for aerospace and defense applications, (2) establish domestic production sources, and to demonstrate technological readiness for various missions. The management approach is to encourage the teaming of universities, R&D organizations, and battery manufacturing companies, to build on existing commercial and government technology, and to develop two sources for manufacturing cells and batteries. The technological approach includes: (1) develop advanced electrode materials and electrolytes to achieve improved low temperature performance and long cycle life, (2) optimize cell design to improve specific energy, cycle life and safety, (3) establish manufacturing processes to ensure predictable performance, (4) establish manufacturing processes to ensure predictable performance, (5) develop aerospace lithium ion cells in various AH sizes and voltages, (6) develop electronics for smart battery management, (7) develop a performance database required for various applications, and (8) demonstrate technology readiness for the various missions. Charts which review the requirements for the Li-ion battery development program are presented.

Cutter Connectivity Bandwidth Study

NASA Astrophysics Data System (ADS)

2002-10-01

The goal of this study was to determine how much bandwidth is required for cutters to meet emerging data transfer requirements. The Cutter Connectivity Business Solutions Team with guidance front the Commandant's 5 Innovation Council sponsored this study. Today, many Coast Guard administrative and business functions are being conducted via electronic means. Although our larger cutters can establish part-time connectivity using commercial satellite communications (SATCOM) while underway, there are numerous complaints regarding poor application performance. Additionally, smaller cutters do not have any standard means of underway connectivity. The R&D study shows the most important factor affecting web performance and enterprise applications onboard cutters was latency. Latency describes the time it takes the signal to reach the satellite and come back down through space. The latency due to use of higher orbit satellites is causing poor application performance and inefficient use of expensive SATCOM links. To improve performance, the CC must, (1) reduce latency by using alternate communications links such as low-earth orbit satellites, (2) tailor applications to the SATCOM link and/or (3) optimize protocols used for data communication to minimize time required by present applications to establish communications between the user and the host systems.

Do achievement goals mediate stereotype threat?: an investigation on females' soccer performance.

PubMed

Chalabaev, Aina; Sarrazinr, Philippe; Stone, Jeff; Cury, François

2008-04-01

This research investigated stereotype threat effects on women's performance in sports and examined the mediation of this effect by achievement goals. The influence of two stereotypes-relative to the poor athletic ability and the poor technical soccer ability of women-were studied. Fifty-one female soccer players were randomly assigned to one of three conditions, introducing the task as diagnostic of athletic ability, technical soccer ability, or sports psychology. Next, they filled out a questionnaire measuring achievement goals and performed a soccer dribbling task. Results showed that compared with the control condition, females' performance significantly decreased in the athletic ability condition and tended to decrease in the technical soccer ability condition. Moreover, participants endorsed a performance-avoidance (relative to performance-approach) goal when the stereotypes were activated. However, this goal endorsement was not related to performance. The implications of these results for understanding the role of stereotypes in gender inequalities in sports are discussed.

Recursive formulae and performance comparisons for first mode dynamics of periodic structures

NASA Astrophysics Data System (ADS)

Hobeck, Jared D.; Inman, Daniel J.

2017-05-01

Periodic structures are growing in popularity especially in the energy harvesting and metastructures communities. Common types of these unique structures are referred to in the literature as zigzag, orthogonal spiral, fan-folded, and longitudinal zigzag structures. Many of these studies on periodic structures have two competing goals in common: (a) minimizing natural frequency, and (b) minimizing mass or volume. These goals suggest that no single design is best for all applications; therefore, there is a need for design optimization and comparison tools which first require efficient easy-to-implement models. All available structural dynamics models for these types of structures do provide exact analytical solutions; however, they are complex requiring tedious implementation and providing more information than necessary for practical applications making them computationally inefficient. This paper presents experimentally validated recursive models that are able to very accurately and efficiently predict the dynamics of the four most common types of periodic structures. The proposed modeling technique employs a combination of static deflection formulae and Rayleigh’s Quotient to estimate the first mode shape and natural frequency of periodic structures having any number of beams. Also included in this paper are the results of an extensive experimental validation study which show excellent agreement between model prediction and measurement. Lastly, the proposed models are used to evaluate the performance of each type of structure. Results of this performance evaluation reveal key advantages and disadvantages associated with each type of structure.

Ames Research Center FY 2000 Implementation Plan: Leading Technology into the New Millennium

NASA Technical Reports Server (NTRS)

2000-01-01

This document presents the implementation plan for Ames Research Center (ARC) within the overall framework of the NASA Strategic Plan. It describes how ARC intends to implement its Center of Excellence responsibilities, Agency assigned missions, Agency and Enterprise lead programs, and other roles in support of NASA's vision and mission. All Federal agencies are required by the 1993 Government Performance and Results Act to implement a long-term strategic planning process that includes measurable outcomes and strict accountability. At NASA, this planning process is shaped by the Space Act of 1958, annual appropriations, and other external mandates, as well as by customer requirements. The resulting Strategic Plan sets the overall architecture for what we do, identifies who our customers are, and directs where we are going and why. The Strategic Plan is the basis upon which decisions regarding program implementation and resource deployment are made. Whereas the strategic planning process examines the long-term direction of the organization and identifies a specific set of goals, the implementation planning process examines the detailed performance of the organization and allocates resources toward meeting these goals. It is the purpose of this implementation document to provide the connection between the NASA Strategic Plan and the specific programs and support functions that ARC employees perform. This connection flows from the NASA Strategic Plan, through the various Strategic Enterprise plans to the ARC Center of Excellence, primary missions, Lead Center programs, program support responsibilities, and ultimately, to the role of the individual ARC employee.

Hippocampus and Retrosplenial Cortex Combine Path Integration Signals for Successful Navigation

PubMed Central

Erdem, Uğur M.; Ross, Robert S.; Brown, Thackery I.; Hasselmo, Michael E.; Stern, Chantal E.

2013-01-01

The current study used fMRI in humans to examine goal-directed navigation in an open field environment. We designed a task that required participants to encode survey-level spatial information and subsequently navigate to a goal location in either first person, third person, or survey perspectives. Critically, no distinguishing landmarks or goal location markers were present in the environment, thereby requiring participants to rely on path integration mechanisms for successful navigation. We focused our analysis on mechanisms related to navigation and mechanisms tracking linear distance to the goal location. Successful navigation required translation of encoded survey-level map information for orientation and implementation of a planned route to the goal. Our results demonstrate that successful first and third person navigation trials recruited the anterior hippocampus more than trials when the goal location was not successfully reached. When examining only successful trials, the retrosplenial and posterior parietal cortices were recruited for goal-directed navigation in both first person and third person perspectives. Unique to first person perspective navigation, the hippocampus was recruited to path integrate self-motion cues with location computations toward the goal location. Last, our results demonstrate that the hippocampus supports goal-directed navigation by actively tracking proximity to the goal throughout navigation. When using path integration mechanisms in first person and third person perspective navigation, the posterior hippocampus was more strongly recruited as participants approach the goal. These findings provide critical insight into the neural mechanisms by which we are able to use map-level representations of our environment to reach our navigational goals. PMID:24305826

The Strength of the Relation between Performance-Approach and Performance-Avoidance Goal Orientations: Theoretical, Methodological, and Instructional Implications

ERIC Educational Resources Information Center

Linnenbrink-Garcia, Lisa; Middleton, Michael J.; Ciani, Keith D.; Easter, Matthew A.; O'Keefe, Paul A.; Zusho, Akane

2012-01-01

In current research on achievement goal theory, most researchers differentiate between performance-approach and performance-avoidance goal orientations. Evidence from prior research and from several previously published data sets is used to highlight that the correlation is often rather large, with a number of studies reporting correlations above…

A Framework for RFID Survivability Requirement Analysis and Specification

NASA Astrophysics Data System (ADS)

Zuo, Yanjun; Pimple, Malvika; Lande, Suhas

Many industries are becoming dependent on Radio Frequency Identification (RFID) technology for inventory management and asset tracking. The data collected about tagged objects though RFID is used in various high level business operations. The RFID system should hence be highly available, reliable, and dependable and secure. In addition, this system should be able to resist attacks and perform recovery in case of security incidents. Together these requirements give rise to the notion of a survivable RFID system. The main goal of this paper is to analyze and specify the requirements for an RFID system to become survivable. These requirements, if utilized, can assist the system in resisting against devastating attacks and recovering quickly from damages. This paper proposes the techniques and approaches for RFID survivability requirements analysis and specification. From the perspective of system acquisition and engineering, survivability requirement is the important first step in survivability specification, compliance formulation, and proof verification.

[Definition and specification requirements for PAC-systems (picture archiving and communication system). A performance index with reference to the standard "IEEE Recommended Practice for Software Requirement Specifications"].

PubMed

König, H; Klose, K J

1999-04-01

The formulation of requirements is necessary to control the goals of a PACS project. Furthermore, in this way, the scope of functionality necessary to support radiological working processes becomes clear. Definitions of requirements and specification are formulated independently of systems according to the IEEE standard "Recommended Practice for Software Requirements Specifications". Definitions are given in the Request for Information, specifications in the Request for Proposal. Functional and non-functional requirements are distinguished. The solutions are rated with respect to scope, appropriateness and quality of implementation. A PACS checklist was created according to the methods described above. It is published on the homepage of the "Arbeitsgemeinschaft Informationstechnologie" (AGIT) within the "Deutsche Röntgengesellschaft" (DRG) (http://www.uni-marburg.de/mzr/agit). The checklist provides a discussion forum which should contribute to an agreement on accepted basic PACS functionalities.

Effects of Achievement Goals on Challenge Seeking and Feedback Processing: Behavioral and fMRI Evidence

PubMed Central

Lee, Woogul; Kim, Sung-il

2014-01-01

We conducted behavioral and functional magnetic resonance imaging (fMRI) research to investigate the effects of two types of achievement goals—mastery goals and performance-approach goals— on challenge seeking and feedback processing. The results of the behavioral experiment indicated that mastery goals were associated with a tendency to seek challenge, both before and after experiencing difficulty during task performance, whereas performance-approach goals were related to a tendency to avoid challenge after encountering difficulty during task performance. The fMRI experiment uncovered a significant decrease in ventral striatal activity when participants received negative feedback for any task type and both forms of achievement goals. During the processing of negative feedback for the rule-finding task, performance-approach-oriented participants showed a substantial reduction in activity in the dorsolateral prefrontal cortex (DLPFC) and the frontopolar cortex, whereas mastery-oriented participants showed little change. These results suggest that performance-approach-oriented participants are less likely to either recruit control processes in response to negative feedback or focus on task-relevant information provided alongside the negative feedback. In contrast, mastery-oriented participants are more likely to modulate aversive valuations to negative feedback and focus on the constructive elements of feedback in order to attain their task goals. We conclude that performance-approach goals lead to a reluctant stance towards difficulty, while mastery goals encourage a proactive stance. PMID:25251396

Predicting Academic Self-Handicapping in Different Age Groups: The Role of Personal Achievement Goals and Social Goals

ERIC Educational Resources Information Center

Leondari, Angeliki; Gonida, Eleftheria

2007-01-01

Background: Academic self-handicapping refers to the use of impediments to successful performance on academic tasks. Previous studies have shown that it is related to personal achievement goals. A performance goal orientation is a positive predictor of self-handicapping, whereas a task goal orientation is unrelated to self-handicapping. Aims: The…

Multiple Goals in a Hong Kong Chinese Educational Context: An Investigation of Developmental Trends and Learning Outcomes

ERIC Educational Resources Information Center

Watkins, David; Hattie, John

2012-01-01

Social goals have also been proposed as important additions to mastery and performance goals in educational contexts, particularly in non-Western cultures but no study has yet tested the possibility that such goals can also combine with mastery and performance goals leading to superior learning outcomes. Longitudinal studies are also rare in this…

Meeting Core Requirements through Efficient Time Management. Teaching Tips.

ERIC Educational Resources Information Center

Prusak, Keven

1997-01-01

Using a basketball unit as an example, this paper presents a model to help middle school physical educators accomplish a proper warmup, stretch, and cardiovascular workout as required by state core requirements without sacrificing time for skills acquisition and play. Concepts of individual goal setting and goal achievement are an inherent part of…

Achievement, attributions, self-efficacy, and goal setting by accounting undergraduates.

PubMed

Cheng, Pi-Yueh; Chiou, Wen-Bin

2010-02-01

Correlations were examined between two measures of accounting self-efficacy achievement goal setting, attributions, and scores on the Accounting Practice Achievement Test, obtained 1 yr. apart for 124 freshmen in junior college. Analysis indicated favorable attribution contributed to a higher mean score on accounting self-efficacy. Students with higher perceived self-efficacy performed better on the proficiency tests. Those with higher self-efficacy also set higher goals for subsequent achievement tests. Moreover, students who set higher achievement goals performed better. Goal setting mediated the relation of initial self-efficacy with subsequent test performance. However, the amount of variance accounted for by self-efficacy was small. An effective method for enhancing performance on an accounting achievement test might be to increase beneficial attributions, self-efficacy in accounting, and to encourage setting reasonable achievement goals.

An Operational Computational Terminal Area PBL Prediction System

NASA Technical Reports Server (NTRS)

Lin, Yuh-Lang; Kaplan, Michael L.

1998-01-01

There are two fundamental goals of this research project which are listed here in terms of priority, i.e., a primary and secondary goal. The first and primary goal is to develop a prognostic system which could satisfy the operational weather prediction requirements of the meteorological subsystem within the Aircraft Vortex Spacing System (AVOSS), i.e., an operational computational Terminal Area PBL Prediction System (TAPPS). The second goal is to perform indepth diagnostic analyses of the meteorological conditions during the special wake vortex deployments at Memphis and Dallas during August 95 and September 97, respectively. These two goals are interdependent because a thorough understanding of the atmospheric dynamical processes which produced the unique meteorology during the Memphis and Dallas deployments will help us design a prognostic system for the planetary boundary layer (PBL) which could be utilized to support the meteorological subsystem within AVOSS. Concerning the primary goal, TAPPS Stage 2 was tested on the Memphis data and is about to be tested on the Dallas case studies. Furthermore benchmark tests have been undertaken to select the appropriate platform to run TAPPS in real time in support of the DFW AVOSS system. In addition, a technique to improve the initial data over the region surrounding Dallas was also tested and modified for potential operational use in TAPPS. The secondary goal involved several sensitivity simulations and comparisons to Memphis observational data sets in an effort to diagnose what specific atmospheric phenomena where occurring which may have impacted the dynamics of atmospheric wake vortices.

Orientation of lizards in a Morris water-maze: roles of the sun compass and the parietal eye.

PubMed

Foà, Augusto; Basaglia, Francesca; Beltrami, Giulia; Carnacina, Margherita; Moretto, Elisa; Bertolucci, Cristiano

2009-09-15

The present study examined for the first time whether a Morris water-maze can be used to explore compass and other orientation mechanisms in the ruin lizard Podarcis sicula. In the open field, during sunny days, lizards were individually trained to swim from the center of the water maze onto a hidden platform (the goal), positioned at the periphery of the maze in a single compass direction. The goal was invisible because it was placed just beneath the water surface and the water was rendered opaque. The results showed that lizards learn to swim directly towards the hidden goal under the sun in the absence of visual feature cues. We further examined whether the observed orientation response would be due to lizards learning the spatial position of the goal relative to the sun's azimuth, i.e. to the use of a time-compensated sun compass. Lizards reaching learning criteria were subjected to 6 h clock-shift (fast or slow), and tested for goal orientation in the Morris water-maze. Results demonstrated that the learned orientation response is mediated by a time-compensated sun compass. Further investigations provided direct evidence that in ruin lizards an intact parietal eye is required to perform goal orientation under the sun inside a Morris water-maze, and that other brain photoreceptors, like the pineal or deep brain photoreceptors, are not involved in orientation.

The Effects of Goal Setting on Rugby Performance

ERIC Educational Resources Information Center

Mellalieu, Stephen D.; Hanton, Sheldon; O'Brien, Michael

2006-01-01

Goal-setting effects on selected performance behaviors of 5 collegiate rugby players were assessed over an entire competitive season using self-generated targets and goal-attainment scaling. Results suggest that goal setting was effective for enhancing task-specific on-field behavior in rugby union. (Contains 1 figure.)

An open microcomputer-based laboratory system for perceptional experimentality

NASA Astrophysics Data System (ADS)

Hamalainen, Ari

A computer, equipped with hardware for acquiring data about the properties of a physical system and programs for processing that data, is a powerful tool for physics research and instruction. There is strong evidence that utilizing microcomputer-based laboratories (MBLs) in instruction can lead to significantly improved learning. The perceptional approach is a method for physics instruction, developed at the Department of Physics, University of Helsinki. Its main arguments are that the meanings of the concepts must be learnt before their formal definitions and adoption, and that learning and research are fundamentally similar concept formation processes. Applying the perceptional approach requires the ability to perform quantitative experiments, either as students' laboratory exercises or as lecture demonstrations, and to process their results. MBL tools are essential for this. In student's laboratory exercises, they reduce the routine work and leave more time for the actual learning. In lecture demonstrations, they make it possible to perform the experiments in the tight time limits. At a previous stage of the research, a set of requirements was found that the perceptional approach places on MBL systems. The primary goal of this thesis is to build a prototype of a MBL system that would fulfil these requirements. A secondary goal is to describe technical aspects of a computerized measurement system from the standpoint of educational use. The prototype was built using mostly commercial sensors and data acquisition units. The software was written with a visual programming language, designed for instrumentation applications. The prototype system was developed and tested with a set of demonstrations of various topics in the Finnish high school physics curriculum, which were implemented according to the perceptional approach. Limited usability tests were also performed. The prototype was improved, until it could perform the test demonstrations. It was found to meet the formulated requirements quite well, although not fully. It was also found that a visual programming language for instrumentation might have wider use in science education. The public domain programs of the prototype are available via Internet, in .

Parenting Styles and Adolescents’ School Adjustment: Investigating the Mediating Role of Achievement Goals within the 2 × 2 Framework

PubMed Central

Xiang, Shiyuan; Liu, Yan; Bai, Lu

2017-01-01

This study examines the multiple mediating roles of achievement goals based on a 2 × 2 framework of the relationships between parenting styles and adolescents’ school adjustment. The study sample included 1061 Chinese adolescent students (50.4% girls) between the ages of 12 and 19, who completed questionnaires regarding parenting styles (parental autonomy support and psychological control), achievement goals (mastery approach, mastery avoidance, performance approach, and performance avoidance goals) and school adjustment variables (emotion, students’ life satisfaction, school self-esteem, problem behavior, academic achievement, and self-determination in school). A structural equation modeling (SEM) approach was used to test our hypotheses. The results indicated that parental autonomy support was associated with adolescents’ school adjustment in an adaptive manner, both directly and through its positive relationship with both mastery and performance approach goals; however, parental psychological control was associated with adolescents’ school adjustment in a maladaptive manner, both directly and through its positive relationship with both mastery and performance avoidance goals. In addition, the results indicated that mastery avoidance goals suppressed the relationship between parental autonomy support and adolescents’ school adjustment, and performance approach goals suppressed the relationship between this adjustment and parental psychological control. These findings extend the limited literature regarding the 2 × 2 framework of achievement goals and enable us to evidence the mediating and suppressing effects of achievement goals. This study highlights the importance of parenting in adolescents’ school adjustment through the cultivation of different achievement goals. PMID:29085321

Parenting Styles and Adolescents' School Adjustment: Investigating the Mediating Role of Achievement Goals within the 2 × 2 Framework.

PubMed

Xiang, Shiyuan; Liu, Yan; Bai, Lu

2017-01-01

This study examines the multiple mediating roles of achievement goals based on a 2 × 2 framework of the relationships between parenting styles and adolescents' school adjustment. The study sample included 1061 Chinese adolescent students (50.4% girls) between the ages of 12 and 19, who completed questionnaires regarding parenting styles (parental autonomy support and psychological control), achievement goals (mastery approach, mastery avoidance, performance approach, and performance avoidance goals) and school adjustment variables (emotion, students' life satisfaction, school self-esteem, problem behavior, academic achievement, and self-determination in school). A structural equation modeling (SEM) approach was used to test our hypotheses. The results indicated that parental autonomy support was associated with adolescents' school adjustment in an adaptive manner, both directly and through its positive relationship with both mastery and performance approach goals; however, parental psychological control was associated with adolescents' school adjustment in a maladaptive manner, both directly and through its positive relationship with both mastery and performance avoidance goals. In addition, the results indicated that mastery avoidance goals suppressed the relationship between parental autonomy support and adolescents' school adjustment, and performance approach goals suppressed the relationship between this adjustment and parental psychological control. These findings extend the limited literature regarding the 2 × 2 framework of achievement goals and enable us to evidence the mediating and suppressing effects of achievement goals. This study highlights the importance of parenting in adolescents' school adjustment through the cultivation of different achievement goals.

Classroom Environment, Achievement Goals and Maths Performance: Gender Differences

ERIC Educational Resources Information Center

Gherasim, Loredana Ruxandra; Butnaru, Simona; Mairean, Cornelia

2013-01-01

This study investigated how gender shapes the relationships between classroom environment, achievement goals and maths performance. Seventh-grade students ("N"?=?498) from five urban secondary schools filled in achievement goal orientations and classroom environment scales at the beginning of the second semester. Maths performance was…

Requirements as Goals and Commitments Too

NASA Astrophysics Data System (ADS)

Chopra, Amit K.; Mylopoulos, John; Dalpiaz, Fabiano; Giorgini, Paolo; Singh, Munindar P.

In traditional software engineering research and practice, requirements are classified either as functional or non-functional. Functional requirements consist of all functions the system-to-be ought to support, and have been modeled in terms of box-and-arrow diagrams in the spirit of SADT. Non-functional requirements include desired software qualities for the system-to-be and have been described either in natural language or in terms of metrics. This orthodoxy was challenged in the mid-90 s by a host of proposals that had a common theme: all requirements are initially stakeholder goals and ought to be elicited, modeled and analyzed as such. Through systematic processes, these goals can be refined into specifications of functions the system-to-be needs to deliver, while actions assigned to external actors need to be executed. This view is dominating Requirements Engineering (RE) research and is beginning to have an impact on RE practice. We propose a next step along this line of research, by adopting the concept of conditional commitment as companion concept to that of goal. Goals are intentional entities that capture the needs and wants of stakeholders. Commitments, on the other hand, are social concepts that define the willingness and capability of an actor A to fulfill a predicate ϕ for the benefit of actor B, provided B (in return) fulfills predicate ψ for the benefit of actor A. In our conceptualization, goals are mapped to collections of commitments rather than functions, qualities, or actor assignments. We motivate the importance of the concept of commitment for RE through examples and discussion. We also contrast our proposal with state-of-the-art requirements modeling and analysis frameworks, such as KAOS, MAP, i * and Tropos.

An autoethnographic exploration of the use of goal oriented feedback to enhance brief clinical teaching encounters.

PubMed

Farrell, Laura; Bourgeois-Law, Gisele; Ajjawi, Rola; Regehr, Glenn

2017-03-01

Supervision in the outpatient context is increasingly in the form of single day interactions between students and preceptors. This creates difficulties for effective feedback, which often depends on a strong relationship of trust between preceptor and student. Building on feedback theories focusing on the relational and dialogic aspects of feedback, this study explored the use of goal-oriented feedback in brief encounters with learners. This study used autoethnography to explore one preceptor's feedback interactions over an eight-month period both in the ambulatory setting and on the wards. Data included written narrative reflections on feedback interactions with twenty-three learners informed by discussions with colleagues and repeated reading of feedback literature. Thematic and narrative analyses of data were performed iteratively. Data analysis emphasized four recurrent themes. (1) Goal discussions were most effective when initiated early and integrated throughout the learning experience. (2) Both learner and preceptor goals were multiple and varied, and feedback needed to reflect this complexity. (3) Negotiation or co-construction of goals was important when considering the focus of feedback discussions in order to create safer, more effective interactions. (4) Goal oriented interactions offer potential benefits to the learner and preceptor. Goal oriented feedback promotes dialogue as it requires both preceptor and learner to acknowledge and negotiate learning goals throughout their interaction. In doing so, feedback becomes an explicit component of the preceptor-learner relationship. This enhances feedback interactions even in relatively brief encounters, and may begin an early educational alliance that can be elaborated with longer interactions.

The adaptation process following acute onset disability: an interactive two-dimensional approach applied to acquired brain injury.

PubMed

Brands, Ingrid M H; Wade, Derick T; Stapert, Sven Z; van Heugten, Caroline M

2012-09-01

To describe a new model of the adaptation process following acquired brain injury, based on the patient's goals, the patient's abilities and the emotional response to the changes and the possible discrepancy between goals and achievements. The process of adaptation after acquired brain injury is characterized by a continuous interaction of two processes: achieving maximal restoration of function and adjusting to the alterations and losses that occur in the various domains of functioning. Consequently, adaptation requires a balanced mix of restoration-oriented coping and loss-oriented coping. The commonly used framework to explain adaptation and coping, 'The Theory of Stress and Coping' of Lazarus and Folkman, does not capture this interactive duality. This model additionally considers theories concerned with self-regulation of behaviour, self-awareness and self-efficacy, and with the setting and achievement of goals. THE TWO-DIMENSIONAL MODEL: Our model proposes the simultaneous and continuous interaction of two pathways; goal pursuit (short term and long term) or revision as a result of success and failure in reducing distance between current state and expected future state and an affective response that is generated by the experienced goal-performance discrepancies. This affective response, in turn, influences the goals set. This two-dimensional representation covers the processes mentioned above: restoration of function and consideration of long-term limitations. We propose that adaptation centres on readjustment of long-term goals to new achievable but desired and important goals, and that this adjustment underlies re-establishing emotional stability. We discuss how the proposed model is related to actual rehabilitation practice.

The globus pallidus pars interna in goal-oriented and routine behaviors: Resolving a long-standing paradox.

PubMed

Piron, Camille; Kase, Daisuke; Topalidou, Meropi; Goillandeau, Michel; Orignac, Hugues; N'Guyen, Tho-Haï; Rougier, Nicolas; Boraud, Thomas

2016-08-01

There is an apparent contradiction between experimental data showing that the basal ganglia are involved in goal-oriented and routine behaviors and clinical observations. Lesion or disruption by deep brain stimulation of the globus pallidus interna has been used for various therapeutic purposes ranging from the improvement of dystonia to the treatment of Tourette's syndrome. None of these approaches has reported any severe impairment in goal-oriented or automatic movement. To solve this conundrum, we trained 2 monkeys to perform a variant of a 2-armed bandit-task (with different reward contingencies). In the latter we alternated blocks of trials with choices between familiar rewarded targets that elicit routine behavior and blocks with novel pairs of targets that require an intentional learning process. Bilateral inactivation of the globus pallidus interna, by injection of muscimol, prevents animals from learning new contingencies while performance remains intact, although slower for the familiar stimuli. We replicate in silico these data by adding lateral competition and Hebbian learning in the cortical layer of the theoretical model of the cortex-basal ganglia loop that provided the framework of our experimental approach. The basal ganglia play a critical role in the deliberative process that underlies learning but are not necessary for the expression of routine movements. Our approach predicts that after pallidotomy or during stimulation, patients should have difficulty with complex decision-making processes or learning new goal-oriented behaviors. © 2016 Movement Disorder Society. © 2016 International Parkinson and Movement Disorder Society.