Project Loon based augmentation for global ionospheric modeling over Southern Hemisphere.

PubMed

Wang, Cheng; Shi, Chuang; Zhang, Hongping

2017-04-06

Global ionospheric products of vertical total electron content (VTEC) derived from GNSS measurements may have low accuracy over oceans and southern latitudes where there are not rich observations. Project Loon provides a great opportunity to enhance the measurements over those areas. In this contribution, a simulation of Project Loon based augmentation for global ionospheric modeling is performed by using the international reference ionosphere (IRI) which could simulate VTEC measurements for the balloons. The performance of the enhanced method based on simulation of Project Loon is investigated by comparing with VTEC maps from Ionosphere Associate Analysis Centers (IAACs) as well as IGS final GIMs. The comparison indicates that there is a better consistency between the VTEC maps by the enhanced method and IGS final GIMs. Also, obvious improvements of RMS maps in GIMs for the middle latitudes and southern latitudes are enabled by the augmentation of Project Loon. Additionally, JASON data are used to validate the specific improvement of the VTEC maps. The results show that the performance of VTEC maps is improved slightly, especially in southern latitudes. It is possible that the VTEC maps could be improved significantly by using real GPS measurements from balloons of Project Loon in the near future.

Project Loon based augmentation for global ionospheric modeling over Southern Hemisphere

PubMed Central

Wang, Cheng; Shi, Chuang; Zhang, Hongping

2017-01-01

Global ionospheric products of vertical total electron content (VTEC) derived from GNSS measurements may have low accuracy over oceans and southern latitudes where there are not rich observations. Project Loon provides a great opportunity to enhance the measurements over those areas. In this contribution, a simulation of Project Loon based augmentation for global ionospheric modeling is performed by using the international reference ionosphere (IRI) which could simulate VTEC measurements for the balloons. The performance of the enhanced method based on simulation of Project Loon is investigated by comparing with VTEC maps from Ionosphere Associate Analysis Centers (IAACs) as well as IGS final GIMs. The comparison indicates that there is a better consistency between the VTEC maps by the enhanced method and IGS final GIMs. Also, obvious improvements of RMS maps in GIMs for the middle latitudes and southern latitudes are enabled by the augmentation of Project Loon. Additionally, JASON data are used to validate the specific improvement of the VTEC maps. The results show that the performance of VTEC maps is improved slightly, especially in southern latitudes. It is possible that the VTEC maps could be improved significantly by using real GPS measurements from balloons of Project Loon in the near future. PMID:28383058

The PATH project in eight European countries: an evaluation.

PubMed

Veillard, Jeremy Henri Maurice; Schiøtz, Michaela Louise; Guisset, Ann-Lise; Brown, Adalsteinn Davidson; Klazinga, Niek S

2013-01-01

This paper's aim is to evaluate the perceived impact and the enabling factors and barriers experienced by hospital staff participating in an international hospital performance measurement project focused on internal quality improvement. Semi-structured interviews involving international hospital performance measurement project coordinators, including 140 hospitals from eight European countries (Belgium, Estonia, France, Germany, Hungary, Poland, Slovakia and Slovenia). Inductively analyzing the interview transcripts was carried out using the grounded theory approach. Even when public reporting is absent, the project was perceived as having stimulated performance measurement and quality improvement initiatives in participating hospitals. Attention should be paid to leadership/ownership, context, content (project intrinsic features) and processes supporting elements. Generalizing the findings is limited by the study's small sample size. Possible implications for the WHO European Regional Office and for participating hospitals would be to assess hospital preparedness to participate in the PATH project, depending on context, process and structural elements; and enhance performance and practice benchmarking through suggested approaches. This research gathered rich and unique material related to an international performance measurement project. It derived actionable findings.

VIDEO BLOGGING AND ENGLISH PRESENTATION PERFORMANCE: A PILOT STUDY.

PubMed

Alan Hung, Shao-Ting; Danny Huang, Heng-Tsung

2015-10-01

This study investigated the utility of video blogs in improving EFL students' performance in giving oral presentations and, further, examined the students' perceptions toward video blogging. Thirty-six English-major juniors participated in a semester-long video blog project for which they uploaded their 3-min. virtual presentation clips over 18 weeks. Their virtual presentation clips were rated by three raters using a scale for speaking performance that contained 14 presentation skills. Data sources included presentation clips, reflections, and interviews. The results indicated that the students' overall presentation performance improved significantly. In particular, among the 14 presentation skills projection, intonation, posture, introduction, conclusion, and purpose saw the most substantial improvement. Finally, the qualitative data revealed that learners perceived that the video blog project facilitated learning but increased anxiety.

Characterising and improving the performance of the Sentinel-3 SRAL altimeter: A Report from SCOOP, SHAPE & SPICE Projects

NASA Astrophysics Data System (ADS)

Restano, Marco; Ambrózio, Américo; Cotton, David; Scoop Team; Fabry, Pierre; Shape Team; McMillan, Malcolm; Spice Team; Benveniste, Jérôme

2017-04-01

Under the ESA Scientific Exploitation of Operational Missions (SEOM) Programme, 3 Projects are currently underway to accurately characterise and improve the performance of the Sentinel-3 SRAL SAR mode altimeter. They are: 1) SCOOP (SAR Altimetry Coastal & Open Ocean Performance Exploitation and Roadmap Study) for Coastal and Open Ocean; 2) SHAPE (Sentinel-3 Hydrologic Altimetry PrototypE) for Inland Water; 3) SPICE (Sentinel-3 Performance improvement for ICE sheets) for Ice Sheets. As projects started before the launch of Sentinel-3 (a full SAR mission), calibrated Cryosat-2 data have been used as input to a processor replicating the Sentinel-3 baseline processing. For the SCOOP project, a first test dataset has been released to end users including data from 10 regions of interest. The successful SAMOSA retracker, adopted in the previous CP4O Project (CryoSat Plus for Oceans), has been readapted to re-track Sentinel-3 waveforms. An improved version of SAMOSA will be released at the end of the project. The SHAPE project is working towards the design and assessment of alternative/innovative techniques not implemented in the Sentinel-3 ground segment (performing no Inland Water dedicated processing). Both rivers and lakes will be studied. Amazon, Brahmaputra and Danube have been selected as rivers, whereas Titicaca and Vanern have been chosen as lakes. The study will include the assimilation of output products into hydrological models for all regions of interest. A final dataset will be provided to end users. The SPICE project is addressing four high level objectives: 1) Assess and improve the Delay-Doppler altimeter processing for ice sheets. 2) Assess and develop SAR waveform retrackers for ice sheets. 3) Evaluate the performance of SAR altimetry relative to conventional pulse limited altimetry. 4) Assess the impact on SAR altimeter measurements of radar wave interaction with the snowpack. Dataset used for validation include ICESat and IceBridge products. Vostok, Dome C and the Spirit Sector (all located in Antarctica) have been selected, along with the Russell Glacier in Greenland, as regions of interest. In the frame of both SCOOP and SHAPE projects, improved wet troposphere corrections will be estimated for all regions of interest.

How to Sustain Change and Support Continuous Quality Improvement

PubMed Central

McQuillan, Rory; Harel, Ziv; Weizman, Adam V.; Thomas, Alison; Nesrallah, Gihad; Bell, Chaim M.; Chan, Christopher T.; Chertow, Glenn M.

2016-01-01

To achieve sustainable change, quality improvement initiatives must become the new way of working rather than something added on to routine clinical care. However, most organizational change is not maintained. In this next article in this Moving Points in Nephrology feature on quality improvement, we provide health care professionals with strategies to sustain and support quality improvement. Threats to sustainability may be identified both at the beginning of a project and when it is ready for implementation. The National Health Service Sustainability Model is reviewed as one example to help identify issues that affect long-term success of quality improvement projects. Tools to help sustain improvement include process control boards, performance boards, standard work, and improvement huddles. Process control and performance boards are methods to communicate improvement results to staff and leadership. Standard work is a written or visual outline of current best practices for a task and provides a framework to ensure that changes that have improved patient care are consistently and reliably applied to every patient encounter. Improvement huddles are short, regular meetings among staff to anticipate problems, review performance, and support a culture of improvement. Many of these tools rely on principles of visual management, which are systems transparent and simple so that every staff member can rapidly distinguish normal from abnormal working conditions. Even when quality improvement methods are properly applied, the success of a project still depends on contextual factors. Context refers to aspects of the local setting in which the project operates. Context affects resources, leadership support, data infrastructure, team motivation, and team performance. For these reasons, the same project may thrive in a supportive context and fail in a different context. To demonstrate the practical applications of these quality improvement principles, these principles are applied to a hypothetical quality improvement initiative that aims to promote home dialysis (home hemodialysis and peritoneal dialysis). PMID:27016498

Balanced RAP/RAS mix design and performance evaluation for project - specific service conditions.

DOT National Transportation Integrated Search

2013-01-01

This presentation summarizes Projects 0-6092/0-6614. It includes accomplishments, best practices, field performance data of RAP/RAS test sections, balanced RAP/RAS mix design for project-specific conditions, and approaches for improving RAP/RAS mix p...

WINS: Workplace Improvement of Necessary Skills. Final Report.

ERIC Educational Resources Information Center

Dwyer, Ann

The Workplace Improvement of Necessary Skills (WINS) project was initiated by a statewide coalition of Washington businesses and educational institutions to prepare workers in a number of high-performance workplaces to participate fully in their work environments. Together, the project's 11 sites served 872 participants. All project instructors…

Optimized image acquisition for breast tomosynthesis in projection and reconstruction space.

PubMed

Chawla, Amarpreet S; Lo, Joseph Y; Baker, Jay A; Samei, Ehsan

2009-11-01

Breast tomosynthesis has been an exciting new development in the field of breast imaging. While the diagnostic improvement via tomosynthesis is notable, the full potential of tomosynthesis has not yet been realized. This may be attributed to the dependency of the diagnostic quality of tomosynthesis on multiple variables, each of which needs to be optimized. Those include dose, number of angular projections, and the total angular span of those projections. In this study, the authors investigated the effects of these acquisition parameters on the overall diagnostic image quality of breast tomosynthesis in both the projection and reconstruction space. Five mastectomy specimens were imaged using a prototype tomosynthesis system. 25 angular projections of each specimen were acquired at 6.2 times typical single-view clinical dose level. Images at lower dose levels were then simulated using a noise modification routine. Each projection image was supplemented with 84 simulated 3 mm 3D lesions embedded at the center of 84 nonoverlapping ROIs. The projection images were then reconstructed using a filtered backprojection algorithm at different combinations of acquisition parameters to investigate which of the many possible combinations maximizes the performance. Performance was evaluated in terms of a Laguerre-Gauss channelized Hotelling observer model-based measure of lesion detectability. The analysis was also performed without reconstruction by combining the model results from projection images using Bayesian decision fusion algorithm. The effect of acquisition parameters on projection images and reconstructed slices were then compared to derive an optimization rule for tomosynthesis. The results indicated that projection images yield comparable but higher performance than reconstructed images. Both modes, however, offered similar trends: Performance improved with an increase in the total acquisition dose level and the angular span. Using a constant dose level and angular span, the performance rolled off beyond a certain number of projections, indicating that simply increasing the number of projections in tomosynthesis may not necessarily improve its performance. The best performance for both projection images and tomosynthesis slices was obtained for 15-17 projections spanning an angular are of approximately 45 degrees--the maximum tested in our study, and for an acquisition dose equal to single-view mammography. The optimization framework developed in this framework is applicable to other reconstruction techniques and other multiprojection systems.

Development and Field Test of the Trial Battery for Project A. Improving the Selection, Classification and Utilization of Army Enlisted Personnel. Project A: Improving the Selection, Classification and Utilization of Army Enlisted Personnel. ARI Technical Report 739.

ERIC Educational Resources Information Center

Peterson, Norman G., Ed.

As part of the United States Army's Project A, research has been conducted to develop and field test a battery of experimental tests to complement the Armed Services Vocational Aptitude Battery in predicting soldiers' job performance. Project A is the United States Army's large-scale manpower effort to improve selection, classification, and…

Arsenic and Antimony Removal from Drinking Water by Adsorptive Media - U.S. EPA Demonstration Project at South Truckee Meadows General Improvement District (STMGID), NV, Final Performance Evaluation Report

EPA Science Inventory

This report documents the activities performed during and the results obtained from the operation of an arsenic and antimony removal technology demonstrated at the South Truckee Meadows General Improvement District (STMGID) in Washoe County, NV. The objectives of the project wer...

'What I want to do is get half a dozen of them and go and see Simon Cowell': Reflecting on participation and outcomes for people with dementia taking part in a creative musical project.

PubMed

McCabe, Louise; Greasley-Adams, Corinne; Goodson, Katy

2015-11-01

This paper presents the findings from an evaluation of a creative musical project led by Scottish Opera. The project included people with dementia and their carers in the development, writing, design and performance of a musical production about their experiences of love. The project involved professional singers, artists and choreographers from the opera company. Activities involved practice sessions and performances. People with dementia and their carers reflected on positive outcomes from the project including improved confidence; being part of a group; improved physical strength and people seeing them in a new way. Within the evaluation framework they also reported on how the project had been run and gave ideas for future development. Key elements in the success of this project were the involvement of professionals, the kudos of working with a national organisation and the performances that, while daunting, provided unique and rewarding experiences. © The Author(s) 2013.

How to achieve and prove performance improvement - 15 years of experience in German wastewater benchmarking.

PubMed

Bertzbach, F; Franz, T; Möller, K

2012-01-01

This paper shows the results of performance improvement, which have been achieved in benchmarking projects in the wastewater industry in Germany over the last 15 years. A huge number of changes in operational practice and also in achieved annual savings can be shown, induced in particular by benchmarking at process level. Investigation of this question produces some general findings for the inclusion of performance improvement in a benchmarking project and for the communication of its results. Thus, we elaborate on the concept of benchmarking at both utility and process level, which is still a necessary distinction for the integration of performance improvement into our benchmarking approach. To achieve performance improvement via benchmarking it should be made quite clear that this outcome depends, on one hand, on a well conducted benchmarking programme and, on the other, on the individual situation within each participating utility.

76 FR 40370 - Agency Information Collection Activities: Proposed Collection; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-08

... Program and Quality Improvement Project Reporting Tools; Use: Section 1852e(1), (2), (3)(a)(i) of the...), and reporting its performance to CMS. MAOs will submit their Chronic Care Improvement Programs (CCIPs) and Quality Improvement Project (QIPs) using the revised CCIP and QIP Reporting Tools that are...

Embarking on performance improvement.

PubMed

Brown, Bobbi; Falk, Leslie Hough

2014-06-01

Healthcare organizations should approach performance improvement as a program, not a project. The program should be led by a guidance team that identifies goals, prioritizes work, and removes barriers to enable clinical improvement teams and work groups to realize performance improvements. A healthcare enterprise data warehouse can provide the initial foundation for the program analytics. Evidence-based best practices can help achieve improved outcomes and reduced costs.

42 CFR 482.21 - Condition of participation: Quality assessment and performance improvement program.

Code of Federal Regulations, 2010 CFR

2010-10-01

... projects, develop and implement an information technology system explicitly designed to improve patient... program that shows measurable improvement in indicators for which there is evidence that it will improve... learning throughout the hospital. (3) The hospital must take actions aimed at performance improvement and...

Is there enough research output of EU projects available to assess and improve health system performance? An attempt to understand and categorise the output of EU projects conducted between 2002 and 2012.

PubMed

Zander, Britta; Busse, Reinhard

2017-02-22

Adequate performance assessment benefits from the use of disaggregated data to allow a proper evaluation of health systems. Since routinely collected data are usually not disaggregated enough to allow stratified analyses of healthcare needs, utilisation, cost and quality across different sectors, international research projects could fill this gap by exploring means to data collection or even providing individual-level data. The aim of this paper is therefore to (1) study the availability and accessibility of relevant European-funded health projects, and (2) to analyse their contents and methodologies. The European Commission Public Health Projects Database and CORDIS were searched for eligible projects, which were then analysed by information openly available online. Overall, only a few of the 39 identified projects produced data useful for proper performance assessment, due to, for example, lacking available or accessible data, or poor linkage of health status to costs and patient experiences. Other problems were insufficient databases to identify projects and poor communication of project contents and results. A new approach is necessary to improve accessibility to and coverage of data on outcomes, quality and costs of health systems enabling decision-makers and health professionals to properly assess performance.

Learning Investment for Tomorrow: ESEA Title I Project 69-092, Evaluation Report, 1968-1969.

ERIC Educational Resources Information Center

Colorado Springs Public Schools, CO. Div. of Special Services.

This evaluation report carries a description of each project then in operation, an analysis of the evaluative data collected for each, and recommendations for improvement. Objectives of the projects, geared for disadvantaged youth (K-12), were: improvement of performance of capabilities of children with learning disabilities due to psychological,…

Effect of participating in Taiwan Quality Indicator Project on hospital efficiency in Taiwan.

PubMed

Chu, Hsuan-Lien; Wang, Chen-Chin; Shiu, Shu Fen

2009-01-01

To examine the effect of participating in Taiwan Quality Indicator Project (TQIP) on hospital efficiency and investigate why hospitals participate in TQIP. Our sample consists of 417 private not-for-profit hospitals in Taiwan during the 2001-2007 period. A simultaneous-equation model was performed to examine if hospitals that participated in TQIP were more efficient than hospitals that did not and investigate which variables affected the probabilities of hospitals' participation in the project. Our findings indicate that participating hospitals are more efficient than hospitals not participating in TQIP. In addition, hospital efficiency, hospital size, teaching status, and hospital age are positively related to participation in the project. These empirical results can be used as supporting evidence of success in improving performance through creating quality for hospitals that have participated in the project and offer insights into the value and strengths of the project. In addition, in recent years, reimbursement systems worldwide have partly moved payment methods to a pay-for-performance mechanism. In an attempt to control costs and improve quality, the policy makers should consider participating in Quality Indicator Project (QIP) as being one of the criteria to be reimbursed for performance.

Managing for Results in America's Great City Schools 2014: Results from Fiscal Year 2012-13. A Report of the Performance Measurement and Benchmarking Project

ERIC Educational Resources Information Center

Council of the Great City Schools, 2014

2014-01-01

In 2002 the "Council of the Great City Schools" and its members set out to develop performance measures that could be used to improve business operations in urban public school districts. The Council launched the "Performance Measurement and Benchmarking Project" to achieve these objectives. The purposes of the project was to:…

PARCS-Primary Atomic Reference Clock in Space

NASA Astrophysics Data System (ADS)

Ashby, Neil

2000-04-01

The purpose of the PARCS project is to place an advanced Cesium clock on the International Space Station (ISS). The project has been approved by NASA at the level of Science Concept Review. Groups at the National Institute of Standards and Technology, Jet Propulsion Laboratory, University of Colorado, and Harvard-Smithsonian Astrophysical Observatory, University of Torino are collaborating on clock design and construction. The microgravity space environment allows laser-cooled Cs atoms to spend longer times in the beam, resulting in improved clock performance. Clock stabilities of 3 × 10-14 at one second and accuracies of 1 × 10-16 are projected. With improved clock performance, significant improvements in several fundamental special and general relativity experiments are expected. For an ISS orbit at 400 km altitude and eccentricity 0.02, the gravitational frequency shift should be measureable about 35 times better than the previous best, Gravity Probe A. Improvements in testing Local Position Invariance and in a Kennedy-Thorndike experiment are expected. Areas of technology such as world-wide timing and time transfer and navigation will also directly benefit from such a high-performance clock in space. This paper will briefly describe the PARCS clock. The principal limitations on performance of relativity experiments, scientific objectives and benefits, and projected outcomes, will be discussed.

Safety incentive and penalty provisions in Indian construction projects and their impact on safety performance.

PubMed

Hasan, Abid; Jha, Kumar Neeraj

2013-01-01

Safety incentive and penalty (I/P) provisions in construction contracts are one of the most common forms of I/P. Contradictory opinions on the effectiveness of these provisions have been expressed in the literature. Statistics on safety provisions were collected from 32 construction projects, which include both types of contracts - those with safety I/P provisions and those without them. Although inclusion of safety I/P provisions in contracts helps in improving the overall safety performance in construction projects, further scope for improvement still exists. Literature review and structured personal interviews, coupled with a survey based on preliminary questionnaire, revealed that successful formulation and implementation of such provisions are dependent on 25 attributes which need the attention of both clients and contractors. A questionnaire-based survey was conducted to evaluate these attributes. The six factors extracted by carrying out factor analysis are: incentive distribution method, proper labour training, special attention to risky situations, role of safety committee and sub-contractors, specialised works and safety equipments, and right form of I/P. If taken care of, these attributes have the potential to improve the safety performance in construction projects. The results would be useful to clients and contractors in implementing the safety I/P provisions and thereby improving safety performance.

A multilevel study of the impact of project manager's leadership on extra-role performance of project team members

NASA Astrophysics Data System (ADS)

Shokory, Suzyanty Mohd; Suradi, Nur Riza Mohd

2018-04-01

The current study examines the impact of transformational and transactional leadership of project manager on the extra-role performance of project team members. In addition, this study also identifies factor dominant to extra-role performance of project team members when the transformational and transactional leadership of project managers are analyzed simultaneously. The study involved 175 of project team members from 35 project teams (each project team consists of different contracting companies registered in the Selangor (N = 175 from 35 contractors company). A multilevel analysis with hierarchical linear modeling (HLM) approach was used in this study. The analysis showed that transformational and transactional leadership of the project manager is a positive significant with extra-role performance project team members when analyzed separately. However when the two constructs (transformational leadership and transactional leadership of project manager) were analyzed simultaneously, transformational leadership was found to have more impact on extra-role performance project team members compared to transactional leadership. These findings explained that although transformational and transactional leadership of project managers can improve extra-role performance project team members, but this study has proved that transformational leadership of project managers affect extra-role performance project team members more as compared to transactional leadership.

Sentinel-3 SAR Altimetry over Coastal and Open Ocean: performance assessment and improved retrieval methods in the ESA SCOOP Project.

NASA Astrophysics Data System (ADS)

Benveniste, J.; Cotton, D.; Moreau, T.; Raynal, M.; Varona, E.; Cipollini, P.; Cancet, M.; Martin, F.; Fenoglio-Marc, L.; Naeije, M.; Fernandes, J.; Lazaro, C.; Restano, M.; Ambrózio, A.

2017-12-01

The ESA Sentinel-3 satellite, launched in February 2016 as a part of the Copernicus programme, is the second satellite to operate a SAR mode altimeter. The Sentinel 3 Synthetic Aperture Radar Altimeter (SRAL) is based on the heritage from Cryosat-2, but this time complemented by a Microwave Radiometer (MWR) to provide a wet troposphere correction, and operating at Ku and C-Bands to provide an accurate along-track ionospheric correction. The SRAL is operated in SAR mode over the whole ocean and promises increased performance w.r.t. conventional altimetry. SCOOP (SAR Altimetry Coastal & Open Ocean Performance) is a project funded under the ESA SEOM (Scientific Exploitation of Operational Missions) Programme Element, started in September 2015, to characterise the expected performance of Sentinel-3 SRAL SAR mode altimeter products, in the coastal zone and open-ocean, and then to develop and evaluate enhancements to the baseline processing scheme in terms of improvements to ocean measurements. There is also a work package to develop and evaluate an improved Wet Troposphere correction for Sentinel-3, based on the measurements from the on-board MWR, further enhanced mostly in the coastal and polar regions using third party data, and provide recommendations for use. In this presentation we present results from the SCOOP project that demonstrate the excellent performance of SRAL in terms of measurement precision, and we illustrate the development and testing of new processing approaches designed specifically to improve performance close to the coast. The SCOOP test data sets and relevant documentation are available to external researchers on application to the project team. At the end of the project recommendations for further developments and implementations will be provided through a scientific roadmap.

A Project-Based Digital Storytelling Approach for Improving Students' Learning Motivation, Problem-Solving Competence and Learning Achievement

ERIC Educational Resources Information Center

Hung, Chun-Ming; Hwang, Gwo-Jen; Huang, Iwen

2012-01-01

Although project-based learning is a well-known and widely used instructional strategy, it remains a challenging issue to effectively apply this approach to practical settings for improving the learning performance of students. In this study, a project-based digital storytelling approach is proposed to cope with this problem. With a…

The Business Change Initiative: A Novel Approach to Improved Cost and Schedule Management

NASA Technical Reports Server (NTRS)

Shinn, Stephen A.; Bryson, Jonathan; Klein, Gerald; Lunz-Ruark, Val; Majerowicz, Walt; McKeever, J.; Nair, Param

2016-01-01

Goddard Space Flight Center's Flight Projects Directorate employed a Business Change Initiative (BCI) to infuse a series of activities coordinated to drive improved cost and schedule performance across Goddard's missions. This sustaining change framework provides a platform to manage and implement cost and schedule control techniques throughout the project portfolio. The BCI concluded in December 2014, deploying over 100 cost and schedule management changes including best practices, tools, methods, training, and knowledge sharing. The new business approach has driven the portfolio to improved programmatic performance. The last eight launched GSFC missions have optimized cost, schedule, and technical performance on a sustained basis to deliver on time and within budget, returning funds in many cases. While not every future mission will boast such strong performance, improved cost and schedule tools, management practices, and ongoing comprehensive evaluations of program planning and control methods to refine and implement best practices will continue to provide a framework for sustained performance. This paper will describe the tools, techniques, and processes developed during the BCI and the utilization of collaborative content management tools to disseminate project planning and control techniques to ensure continuous collaboration and optimization of cost and schedule management in the future.

Using project performance to measure effectiveness of quality management system maintenance and practices in construction industry.

PubMed

Leong, Tiong Kung; Zakuan, Norhayati; Mat Saman, Muhamad Zameri; Ariff, Mohd Shoki Md; Tan, Choy Soon

2014-01-01

This paper proposed seven existing and new performance indicators to measure the effectiveness of quality management system (QMS) maintenance and practices in construction industry. This research is carried out with a questionnaire based on QMS variables which are extracted from literature review and project performance indicators which are established from project management's theory. Data collected was analyzed using correlation and regression analysis. The findings indicate that client satisfaction and time variance have positive and significant relationship with QMS while other project performance indicators do not show significant results. Further studies can use the same project performance indicators to study the effectiveness of QMS in different sampling area to improve the generalizability of the findings.

Using Project Performance to Measure Effectiveness of Quality Management System Maintenance and Practices in Construction Industry

PubMed Central

Leong, Tiong Kung; Ariff, Mohd. Shoki Md.

2014-01-01

This paper proposed seven existing and new performance indicators to measure the effectiveness of quality management system (QMS) maintenance and practices in construction industry. This research is carried out with a questionnaire based on QMS variables which are extracted from literature review and project performance indicators which are established from project management's theory. Data collected was analyzed using correlation and regression analysis. The findings indicate that client satisfaction and time variance have positive and significant relationship with QMS while other project performance indicators do not show significant results. Further studies can use the same project performance indicators to study the effectiveness of QMS in different sampling area to improve the generalizability of the findings. PMID:24701182

Project Future Workplace Literacy Project. Final Performance Report.

ERIC Educational Resources Information Center

Jefferson County Public Schools, Louisville, KY.

Project Future was a 3-year project begun in 1994 as a partnership between the Jefferson County Public Schools and Futura Plastics and Engineering, Inc., Louisville, Kentucky. The project targeted the workplace basic skills of plastic injection molding production workers. The skills classes improved the general education of the workers with…

Evaluation of Soil Media for Stormwater Infiltration Best Management Practices (BMPs)

EPA Science Inventory

This project will improve the performance of structural management practices, and provide guidance that will allow designers to balance infiltration rates with sorption capacity. This project will also perform a standard column test procedure for evaluating candidate soil media.

Physician Perceptions of Performance Feedback in a Quality Improvement Activity.

PubMed

Eden, Aimee R; Hansen, Elizabeth; Hagen, Michael D; Peterson, Lars E

Physician performance and peer comparison feedback can affect physician care quality and patient outcomes. This study aimed to understand family physician perspectives of the value of performance feedback in quality improvement (QI) activities. This study analyzed American Board of Family Medicine open-ended survey data collected between 2004 and 2014 from physicians who completed a QI module that provided pre- and post-QI project individual performance data and peer comparisons. Physicians made 3480 comments in response to a question about this performance feedback, which were generally positive in nature (86%). Main themes that emerged were importance of accurate feedback data, enhanced detail in the content of feedback, and ability to customize peer comparison groups to compare performance to peers with similar patient populations or practice characteristics. Meaningful and tailored performance feedback may be an important tool for physicians to improve their care quality and should be considered an integral part of QI project design.

Continuing education for performance improvement: a creative approach.

PubMed

Collins, Patti-Ann; Hardesty, Ilana; White, Julie L; Zisblatt, Lara

2012-10-01

In an effort to improve patient safety and health care outcomes, continuing medical education has begun to focus on performance improvement initiatives for physician practices. Boston University School of Medicine's (BUSM) Continuing Nursing Education Accredited Provider Unit has begun a creative project to award nursing contact hours for nurses' participation in performance improvement activities. This column highlights its initial efforts. Copyright 2012, SLACK Incorporated.

Approaching the Practice Quality Improvement Project in Interventional Radiology.

PubMed

Reis, Stephen P; White, Benjamin; Sutphin, Patrick D; Pillai, Anil K; Kalva, Sanjeeva P; Toomay, Seth M

2015-12-01

An important component of maintenance of certification and quality improvement in radiology is the practice quality improvement (PQI) project. In this article, the authors describe several methodologies for initiating and completing PQI projects. Furthermore, the authors illustrate several tools that are vital in compiling, analyzing, and presenting data in an easily understandable and reproducible manner. Last, they describe two PQI projects performed in an interventional radiology division that have successfully improved the quality of care for patients. Using the DMAIC (define, measure, analyze, improve, control) quality improvement framework, interventional radiology throughput has been increased, to lessen mediport wait times from 43 to 8 days, and mediport infection rates have decreased from more than 2% to less than 0.4%. Copyright © 2015 American College of Radiology. Published by Elsevier Inc. All rights reserved.

Valley Fill Design and Construction Alternatives to Improve Ecological Performance

EPA Pesticide Factsheets

This presentation discusses; current challenges, comprehensive approaches, BMPs, the Middlefork Development, the Guy Cove project, and a path forward when looking at construction alternatives to improve the ecological performance of valley fills.

Project Ranger Curriculum Guide.

ERIC Educational Resources Information Center

Fox, Carla; And Others

The objective of Project Ranger is to improve school behavior and academic performance of selected, primarily "disruptive," students who are failing in the traditional school program. The Ranger curriculum uses the outdoor environment as the medium for improving student self-concept and relations with peers and adults and for providing…

Impact of senior design project for the development of leadership and management skills in construction management

NASA Astrophysics Data System (ADS)

Chowdhury, Tamara

2013-08-01

Senior design courses are a core part of curricula across engineering and technology disciplines. Such courses offer Construction Management (CMG) students the opportunity to bring together, assimilate and apply the knowledge they have acquired over their entire undergraduate academic programme to an applied technical project. Senior or Capstone design course engages students in a real-world project, enhance leadership development, and prepare to manage and lead project teams. The CMG programme's multidisciplinary approach at Alabama A&M University, combines essential components of construction techniques with concepts of business management to develop technically qualified individuals for responsible management roles in the design, construction and operation of major construction projects. This paper analyses the performance of the students and improvement due to the interaction with the faculty advisors and industrial panel during the two semester Capstone project. The results of this Capstone sequence have shown a continuous improvement of student performance.

Review of issues and challenges for public private partnership (PPP) project performance in Malaysia

NASA Astrophysics Data System (ADS)

Hashim, H.; Che-Ani, A. I.; Ismail, K.

2017-10-01

Public Private Partnership (PPP) in Malaysia aims to stimulate economic growth and overcome the weakness of conventional system. Over the years, many critics have been reported along the massive growth of PPP project development. Within that context, this study provides a review of issues and challenges for PPP pertaining to project performance in Malaysia. The study also attempts to investigate four performance measurement models around the globe as a basis for improvement of PPP in Malaysia. A qualitative method was used to analyse literature review from previous published literatures while comparative analysis was carried out within the models to identify their advantages and disadvantages. The findings show that the issues and challenges occurred were related to human, technical and financial factor that could hinder the implementation of PPP project in Malaysia. From the analysis, KPIs, guideline / framework, risk allocation, efficiency & flexibility are perceived as dominant issues. Finally, the findings provide an informed basis on the opportunity areas to be considered for improvement in order to achieved project effectiveness.

34 CFR 645.32 - How does the Secretary evaluate prior experience?

Code of Federal Regulations, 2010 CFR

2010-07-01

... performance under its expiring Upward Bound grant. This information includes information derived from annual performance reports, audit reports, site visit reports, project evaluation reports, and any other verifiable... project participants have demonstrated improvement in academic skills and competencies as measured by...

Analysis of architect’s performance indicators in project delivery process

NASA Astrophysics Data System (ADS)

Marisa, A.

2018-03-01

Architect as a professional in the construction industry should possess a good performance in project delivery process. As a design professional, architect has an important role to ensure that the process is well-conducted by delivering a high-quality product for the clients. Thus, analyzing architect’s performance indicators is crucial in the project delivery process. This study aims to analyze the relative importance of architect performance indicators in project delivery process among registered architects in North Sumatera, Indonesia. A total of five indicators that measure architect performance in project delivery process were identified and 110 completed questionnaires were obtained and used for data analysis. A relative importance index is used to rank the relative importance of architect performance indicators. Results indicate that focus on the clients is the most important indicator of architect performance in project delivery process. This study demonstrates project communication as one of crucial indicators perceived by the architects for measuring their performance, and fills a knowledge gap on the importance of identifying the most important indicator for measuring architect performance from their own perspectives which previous studies have overlooked to improve performance assessment in project delivery process.

Aircraft Photovoltaic Power-Generating System.

NASA Astrophysics Data System (ADS)

Doellner, Oscar Leonard

Photovoltaic cells, appropriately cooled and operating in the combustion-created high radiant-intensity environment of gas-turbine and jet engines, may replace the conventional (gearbox-driven) electrical power generators aboard jet aircraft. This study projects significant improvements not only in aircraft electrical power-generating-system performance, but also in overall aircraft performance. Jet -engine design modifications incorporating this concept not only save weight (and thus fuel), but are--in themselves --favorable to jet-engine performance. The dissertation concentrates on operational, constructional, structural, thermal, optical, radiometrical, thin-film, and solid-state theoretical aspects of the overall project. This new electrical power-generating system offers solid-state reliability with electrical power-output capability comparable to that of existing aircraft electromechanical power-generating systems (alternators and generators). In addition to improvements in aircraft performance, significant aircraft fuel- and weight-saving advantages are projected.

Web-Based Project Portfolio Management Portal Success: A Quantitative Investigation

ERIC Educational Resources Information Center

Excellent, Frendy

2013-01-01

Due to its centralized content-sharing features, a project portfolio management (PPM) portal enables vertical, as well as horizontal, electronic exchanges between project professionals. Such exchanges, if effective, may deliver an individual impact through improved project performance. Effectiveness engenders use and satisfaction, reflecting the…

Syracuse Labor/Management Consortium Workplace Literacy Skills Improvement Project. Evaluation Report.

ERIC Educational Resources Information Center

Mosenthal, Peter B.; Hinchman, Kathleen A.

An evaluation of this Syracuse, New York workplace literacy skills improvement project had three purposes: to characterize changes in the baseline performance of adults' workplace literacy skills as a function of instructional treatment; to characterize changes in workers' and supervisors' perceptions of worker effectiveness as a function of…

Building a Foundation of Continuous Improvement in a Rapidly Changing Environment: The Dartmouth-Hitchcock Value Institute Experience.

PubMed

McGrath, Susan P; Blike, George T

2015-10-01

A performance improvement competency development program, known as the Value Institute (VI), was established at Dartmouth-Hitchcock (D-H; Lebanon, New Hampshire) in 2011 to develop a performance improvement-focused workforce and systems capable of meeting the challenges of creating a sustainable health system. A tiered competency development program that provides patient safety, health care quality, and improvement science education, and an execution support infrastructure that enables access to performance improvement tools for all employees, comprise the core of the VI. At 20 months after the launch of the first VI classes, more than 10% of all employees were trained to the Yellow Belt level, and approximately 1.5% of all employees became advanced practitioners (Green Belts or Black Belts). Improvement projects have focused on both clinical and business process optimization, as well as regulatory and accreditation compliance and patient safety. Project savings during the two years of operation have exceeded the investment of resources to establish this long-term performance improvement capability by 2.5 times. The D-H VI model promotes multidisciplinary team-based learning, incremental skill development, and access to a common continuous improvement vocabulary and method for all employees-all key to building the teams and momentum needed for successful execution of improvement work and to maintain outcomes. Initial outcomes, represented by organizational spread, project execution status, participants' feedback scores, and return on investment estimates, suggest that robust team-based learning combined with coaching provides sufficient depth and breadth of learning and effective opportunities to gain practical experience in continuous improvement.

Benchmarking forensic mental health organizations.

PubMed

Coombs, Tim; Taylor, Monica; Pirkis, Jane

2011-04-01

This paper describes the forensic mental health forums that were conducted as part of the National Mental Health Benchmarking Project (NMHBP). These forums encouraged participating organizations to compare their performance on a range of key performance indicators (KPIs) with that of their peers. Four forensic mental health organizations took part in the NMHBP. Representatives from these organizations attended eight benchmarking forums at which they documented their performance against previously agreed KPIs. They also undertook three special projects which explored some of the factors that might explain inter-organizational variation in performance. The inter-organizational range for many of the indicators was substantial. Observing this led participants to conduct the special projects to explore three factors which might help explain the variability - seclusion practices, delivery of community mental health services, and provision of court liaison services. The process of conducting the special projects gave participants insights into the practices and structures employed by their counterparts, and provided them with some important lessons for quality improvement. The forensic mental health benchmarking forums have demonstrated that benchmarking is feasible and likely to be useful in improving service performance and quality.

Countermeasures to Improve the Driving Performance of Older Drivers.

ERIC Educational Resources Information Center

Ashman, Richard D.; And Others

1994-01-01

In a 2-year project, 105 older drivers were given physical therapy (flexibility exercises), perceptual therapy (to improve visual discrimination), and driver education; traffic engineering modifications were also made. All four interventions improved performance an average of 7.9%. Engineering was most cost effective on high-volume roads, the…

Sharing Collaborative Designs of Tobacco Cessation Performance Improvement CME Projects

ERIC Educational Resources Information Center

Mullikin, Elizabeth A.; Ales, Mary W.; Cho, Jane; Nelson, Teena M.; Rodrigues, Shelly B.; Speight, Mike

2011-01-01

Introduction: Performance Improvement Continuing Medical Education (PI CME) provides an important opportunity for CME providers to combine educational and quality health care improvement methodologies. Very few CME providers take on the challenges of planning this type of intervention because it is still a new practice and there are limited…

Incomplete projection reconstruction of computed tomography based on the modified discrete algebraic reconstruction technique

NASA Astrophysics Data System (ADS)

Yang, Fuqiang; Zhang, Dinghua; Huang, Kuidong; Gao, Zongzhao; Yang, YaFei

2018-02-01

Based on the discrete algebraic reconstruction technique (DART), this study aims to address and test a new improved algorithm applied to incomplete projection data to generate a high quality reconstruction image by reducing the artifacts and noise in computed tomography. For the incomplete projections, an augmented Lagrangian based on compressed sensing is first used in the initial reconstruction for segmentation of the DART to get higher contrast graphics for boundary and non-boundary pixels. Then, the block matching 3D filtering operator was used to suppress the noise and to improve the gray distribution of the reconstructed image. Finally, simulation studies on the polychromatic spectrum were performed to test the performance of the new algorithm. Study results show a significant improvement in the signal-to-noise ratios (SNRs) and average gradients (AGs) of the images reconstructed from incomplete data. The SNRs and AGs of the new images reconstructed by DART-ALBM were on average 30%-40% and 10% higher than the images reconstructed by DART algorithms. Since the improved DART-ALBM algorithm has a better robustness to limited-view reconstruction, which not only makes the edge of the image clear but also makes the gray distribution of non-boundary pixels better, it has the potential to improve image quality from incomplete projections or sparse projections.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kisner, R.; Melin, A.; Burress, T.

The objective of this project is to demonstrate improved reliability and increased performance made possible by deeply embedding instrumentation and controls (I&C) in nuclear power plant (NPP) components and systems. The project is employing a highly instrumented canned rotor, magnetic bearing, fluoride salt pump as its I&C technology demonstration platform. I&C is intimately part of the basic millisecond-by-millisecond functioning of the system; treating I&C as an integral part of the system design is innovative and will allow significant improvement in capabilities and performance. As systems become more complex and greater performance is required, traditional I&C design techniques become inadequate andmore » more advanced I&C needs to be applied. New I&C techniques enable optimal and reliable performance and tolerance of noise and uncertainties in the system rather than merely monitoring quasistable performance. Traditionally, I&C has been incorporated in NPP components after the design is nearly complete; adequate performance was obtained through over-design. By incorporating I&C at the beginning of the design phase, the control system can provide superior performance and reliability and enable designs that are otherwise impossible. This report describes the progress and status of the project and provides a conceptual design overview for the platform to demonstrate the performance and reliability improvements enabled by advanced embedded I&C.« less

Management of the Atmosphere Resource Recovery and Environmental Monitoring Project

NASA Technical Reports Server (NTRS)

Roman, Monsi; Perry, Jay; Howard, David

2013-01-01

The Advanced Exploration Systems Program's Atmosphere Resource Recovery and Environmental Monitoring (ARREM) project is working to further optimize atmosphere revitalization and environmental monitoring system architectures. This paper discusses project management strategies that tap into skill sets across multiple engineering disciplines, projects, field centers, and industry to achieve the project success. It is the project's objective to contribute to system advances that will enable sustained exploration missions beyond Lower Earth Orbit (LEO) and improve affordability by focusing on the primary goals of achieving high reliability, improving efficiency, and reducing dependence on ground-based logistics resupply. Technology demonstrations are achieved by infusing new technologies and concepts with existing developmental hardware and operating in a controlled environment simulating various crewed habitat scenarios. The ARREM project's strengths include access to a vast array of existing developmental hardware that perform all the vital atmosphere revitalization functions, exceptional test facilities to fully evaluate system performance, and a well-coordinated partnering effort among the NASA field centers and industry partners to provide the innovative expertise necessary to succeed.

24 CFR 241.640 - Employment discrimination prohibited.

Code of Federal Regulations, 2010 CFR

2010-04-01

... AUTHORITIES SUPPLEMENTARY FINANCING FOR INSURED PROJECT MORTGAGES Eligibility Requirements-Supplemental Loans... Individual Utility Meters in Multifamily Projects Without a HUD-Insured or HUD-Held Mortgage Special... performance of constructing the improvements to the project shall provide that there shall be no...

Managing large energy and mineral resources (EMR) projects in challenging environments

NASA Astrophysics Data System (ADS)

Chanmeka, Arpamart

The viability of energy mineral resources (EMR) construction projects is contingent upon the state of the world economic climate. Oil sands projects in Alberta, Canada exemplify large EMR projects that are highly sensitive to fluctuations in the world market. Alberta EMR projects are constrained by high fixed production costs and are also widely recognized as one of the most challenging construction projects to successfully deliver due to impacts from extreme weather conditions, remote locations and issues with labor availability amongst others. As indicated in many studies, these hardships strain the industry's ability to execute work efficiently, resulting in declining productivity and mounting cost and schedule overruns. Therefore, to enhance the competitiveness of Alberta EMR projects, project teams are targeting effective management strategies to enhance project performance and productivity by countering the uniquely challenging environment in Alberta. The main purpose of this research is to develop industry wide benchmarking tailored to the specific constraints and challenges of Alberta. Results support quantitative assessments and identify the root causes of project performance and ineffective field productivity problems in the heavy industry sector capital projects. Customized metrics produced from the data collected through a web-based survey instrument were used to quantitatively assess project performance in the following dimensions: cost, schedule, change, rework, safety, engineering and construction productivity and construction practices. The system enables the industry to measure project performance more accurately, get meaningful comparisons, while establishing credible norms specific to Alberta projects. Data analysis to identify the root cause of performance problems was conducted. The analysis of Alberta projects substantiated lessons of previous studies to create an improved awareness of the abilities of Alberta-based companies to manage their unique projects. This investigation also compared Alberta-based projects with U.S. projects to point out the differences in project process and management strategies under different environments. The relative impact of factors affecting construction productivity were identified and validated by the input from industry experts. The findings help improve the work processes used by companies developing projects in Alberta.

The effect of a resident-led quality improvement project on improving communication between hospital-based and outpatient physicians.

PubMed

Kalanithi, Lucy; Coffey, Charles E; Mourad, Michelle; Vidyarthi, Arpana R; Hollander, Harry; Ranji, Sumant R

2013-01-01

This article reports on a resident-led quality improvement program to improve communication between inpatient internal medicine residents and their patients' primary care physicians (PCPs). The program included education on care transitions, standardization of documentation, audit and feedback of documented PCP communication rates with public reporting of performance, rapid-cycle data analysis and improvement projects, and a financial incentive. At baseline, PCP communication was documented in 55% of patients; after implementation of the intervention, communication was documented in 89.3% (2477 of 2772) of discharges during the program period. The program was associated with a significant increase in referring PCP satisfaction with communication at hospital admission (baseline, 27.7% "satisfied" or "very satisfied"; postintervention, 58.2%; P < .01) but not at discharge (baseline, 14.9%; postintervention, 21.8%; P = .41). Residents cited the importance of PCP communication for patient care and audit and feedback of their performance as the principal drivers of their engagement in the project.

Developing and Testing a Model to Predict Outcomes of Organizational Change

PubMed Central

Gustafson, David H; Sainfort, François; Eichler, Mary; Adams, Laura; Bisognano, Maureen; Steudel, Harold

2003-01-01

Objective To test the effectiveness of a Bayesian model employing subjective probability estimates for predicting success and failure of health care improvement projects. Data Sources Experts' subjective assessment data for model development and independent retrospective data on 221 healthcare improvement projects in the United States, Canada, and the Netherlands collected between 1996 and 2000 for validation. Methods A panel of theoretical and practical experts and literature in organizational change were used to identify factors predicting the outcome of improvement efforts. A Bayesian model was developed to estimate probability of successful change using subjective estimates of likelihood ratios and prior odds elicited from the panel of experts. A subsequent retrospective empirical analysis of change efforts in 198 health care organizations was performed to validate the model. Logistic regression and ROC analysis were used to evaluate the model's performance using three alternative definitions of success. Data Collection For the model development, experts' subjective assessments were elicited using an integrative group process. For the validation study, a staff person intimately involved in each improvement project responded to a written survey asking questions about model factors and project outcomes. Results Logistic regression chi-square statistics and areas under the ROC curve demonstrated a high level of model performance in predicting success. Chi-square statistics were significant at the 0.001 level and areas under the ROC curve were greater than 0.84. Conclusions A subjective Bayesian model was effective in predicting the outcome of actual improvement projects. Additional prospective evaluations as well as testing the impact of this model as an intervention are warranted. PMID:12785571

Does Teacher Evaluation Improve School Performance? Experimental Evidence from Chicago's Excellence in Teaching Project

ERIC Educational Resources Information Center

Steinberg, Matthew P.; Sartain, Lauren

2015-01-01

Chicago Public Schools initiated the Excellence in Teaching Project, a teacher evaluation program designed to increase student learning by improving classroom instruction through structured principal-teacher dialogue. The pilot began in forty-four elementary schools in 2008-09 (cohort 1) and scaled up to include an additional forty-eight…

DOE Office of Scientific and Technical Information (OSTI.GOV)

Webster, Mort D.

This report presents the final outcomes and products of the project as performed both at the Massachusetts Institute of Technology and subsequently at Pennsylvania State University. The research project can be divided into three main components: methodology development for decision-making under uncertainty, improving the resolution of the electricity sector to improve integrated assessment, and application of these methods to integrated assessment.

The ATLAS project: The effects of a constructionist digital laboratory project on undergraduate laboratory performance.

PubMed

Shoepe, Todd C; Cavedon, Dana K; Derian, Joseph M; Levy, Celine S; Morales, Amy

2015-01-01

Anatomical education is a dynamic field where developments in the implementation of constructive, situated-learning show promise in improving student achievement. The purpose of this study was to examine the effectiveness of an individualized, technology heavy project in promoting student performance in a combined anatomy and physiology laboratory course. Mixed-methods research was used to compare two cohorts of anatomy laboratories separated by the adoption of a new laboratory atlas project, which were defined as preceding (PRE) and following the adoption of the Anatomical Teaching and Learning Assessment Study (ATLAS; POST). The ATLAS project required the creation of a student-generated, photographic atlas via acquisition of specimen images taken with tablet technology and digital microscope cameras throughout the semester. Images were transferred to laptops, digitally labeled and photo edited weekly, and compiled into a digital book using Internet publishing freeware for final project submission. An analysis of covariance confirmed that student final examination scores were improved (P < 0.05) following the implementation of the laboratory atlas project (PRE, n = 75; POST, n = 90; means ± SE; 74.9 ± 0.9 versus 78.1 ± 0.8, respectively) after controlling for cumulative student grade point average. Analysis of questionnaires collected (n = 68) from the post group suggested students identified with atlas objectives, appreciated the comprehensive value in final examination preparation, and the constructionism involved, but recommended alterations in assignment logistics and the format of the final version. Constructionist, comprehensive term-projects utilizing student-preferred technologies could be used to improve performance toward student learning outcomes. © 2014 American Association of Anatomists.

RETScreen Plus Software Tutorial

NASA Technical Reports Server (NTRS)

Ganoe, Rene D.; Stackhouse, Paul W., Jr.; DeYoung, Russell J.

2014-01-01

Greater emphasis is being placed on reducing both the carbon footprint and energy cost of buildings. A building's energy usage depends upon many factors one of the most important is the local weather and climate conditions to which it's electrical, heating and air conditioning systems must respond. Incorporating renewable energy systems, including solar systems, to supplement energy supplies and increase energy efficiency is important to saving costs and reducing emissions. Also retrofitting technologies to buildings requires knowledge of building performance in its current state, potential future climate state, projection of potential savings with capital investment, and then monitoring the performance once the improvements are made. RETScreen Plus is a performance analysis software module that supplies the needed functions of monitoring current building performance, targeting projected energy efficiency improvements and verifying improvements once completed. This tutorial defines the functions of RETScreen Plus as well as outlines the general procedure for monitoring and reporting building energy performance.

EGNOS Monitoring Prepared in Space Research Centre P.A.S. for SPMS Project

NASA Astrophysics Data System (ADS)

Swiatek, Anna; Jaworski, Leszek; Tomasik, Lukasz

2017-12-01

The European Geostationary Overlay Service (EGNOS) augments Global Positioning System (GPS) by providing correction data and integrity information for improving positioning over Europe. EGNOS Service Performance Monitoring Support (SPMS) project has assumed establishment, maintenance and implementation of an EGNOS performance monitoring network. The paper presents preliminary results of analyses prepared in Space Research Centre, Polish Academy of Sciences (Warsaw), as one of partners in SPMS project.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Janke, C.J.

Electron beam (EB) curing is a technology that promises, in certain applications, to deliver lower cost and higher performance polymer matrix composite (PMC) structures compared to conventional thermal curing processes. PMCs enhance performance by making products lighter, stronger, more durable, and less energy demanding. They are essential in weight- and performance-dominated applications. Affordable PMCs can enhance US economic prosperity and national security. US industry expects rapid implementation of electron beam cured composites in aircraft and aerospace applications as satisfactory properties are demonstrated, and implementation in lower performance applications will likely follow thereafter. In fact, at this time and partly becausemore » of discoveries made in this project, field demonstrations are underway that may result in the first fielded applications of electron beam cured composites. Serious obstacles preventing the widespread use of electron beam cured PMCs in many applications are their relatively poor interfacial properties and resin toughness. The composite shear strength and resin toughness of electron beam cured carbon fiber reinforced epoxy composites were about 25% and 50% lower, respectively, than those of thermally cured composites of similar formulations. The essential purpose of this project was to improve the mechanical properties of electron beam cured, carbon fiber reinforced epoxy composites, with a specific focus on composite shear properties for high performance aerospace applications. Many partners, sponsors, and subcontractors participated in this project. There were four government sponsors from three federal agencies, with the US Department of Energy (DOE) being the principal sponsor. The project was executed by Oak Ridge National Laboratory (ORNL), NASA and Department of Defense (DOD) participants, eleven private CRADA partners, and two subcontractors. A list of key project contacts is provided in Appendix A. In order to properly manage the large project team and properly address the various technical tasks, the CRADA team was organized into integrated project teams (IPT's) with each team focused on specific research areas. Early in the project, the end user partners developed ''exit criteria'', recorded in Appendix B, against which the project's success was to be judged. The project team made several important discoveries. A number of fiber coatings or treatments were developed that improved fiber-matrix adhesion by 40% or more, according to microdebond testing. The effects of dose-time and temperature-time profiles during the cure were investigated, and it was determined that fiber-matrix adhesion is relatively insensitive to the irradiation procedure, but can be elevated appreciably by thermal postcuring. Electron beam curable resin properties were improved substantially, with 80% increase in electron beam 798 resin toughness, and {approx}25% and 50% improvement, respectively, in ultimate tensile strength and ultimate tensile strain vs. earlier generation electron beam curable resins. Additionally, a new resin electron beam 800E was developed with generally good properties, and a very notable 120% improvement in transverse composite tensile strength vs. earlier generation electron beam cured carbon fiber reinforced epoxies. Chemical kinetics studies showed that reaction pathways can be affected by the irradiation parameters, although no consequential effects on material properties have been noted to date. Preliminary thermal kinetics models were developed to predict degree of cure vs. irradiation and thermal parameters. These models are continually being refined and validated. Despite the aforementioned impressive accomplishments, the project team did not fully realize the project objectives. The best methods for improving adhesion were combined with the improved electron beam 3K resin to make prepreg and uni-directional test laminates from which composite properties could be determined. Nevertheless, only minor improvements in the composite shear strength, and moderate improvements in the transverse tensile strength, were achieved. The project team was not satisfied with the laminate quality achieved, and low quality (specifically, high void fraction) laminates will compromise the composite properties. There were several problems with the prepregging and fabrication, many of them related to the use of new fiber treatments.« less

Use of safety management practices for improving project performance.

PubMed

Cheng, Eddie W L; Kelly, Stephen; Ryan, Neal

2015-01-01

Although site safety has long been a key research topic in the construction field, there is a lack of literature studying safety management practices (SMPs). The current research, therefore, aims to test the effect of SMPs on project performance. An empirical study was conducted in Hong Kong and the data collected were analysed with multiple regression analysis. Results suggest that 3 of the 15 SMPs, which were 'safety committee at project/site level', 'written safety policy', and 'safety training scheme' explained the variance in project performance significantly. Discussion about the impact of these three SMPs on construction was provided. Assuring safe construction should be an integral part of a construction project plan.

Distributed Wind Competitiveness Improvement Project

DOE Office of Scientific and Technical Information (OSTI.GOV)

The Competitiveness Improvement Project (CIP) is a periodic solicitation through the U.S. Department of Energy and its National Renewable Energy Laboratory. The Competitiveness Improvement Project (CIP) is a periodic solicitation through the U.S. Department of Energy and its National Renewable Energy Laboratory. Manufacturers of small and medium wind turbines are awarded cost-shared grants via a competitive process to optimize their designs, develop advanced manufacturing processes, and perform turbine testing. The goals of the CIP are to make wind energy cost competitive with other distributed generation technology and increase the number of wind turbine designs certified to national testing standards. Thismore » fact sheet describes the CIP and funding awarded as part of the project.ufacturers of small and medium wind turbines are awarded cost-shared grants via a competitive process to optimize their designs, develop advanced manufacturing processes, and perform turbine testing. The goals of the CIP are to make wind energy cost competitive with other distributed generation technology and increase the number of wind turbine designs certified to national testing standards. This fact sheet describes the CIP and funding awarded as part of the project.« less

Final Technical Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stoessel, Chris

2013-11-13

This project developed a new high-performance R-10/high SHGC window design, reviewed market positioning and evaluated manufacturing solutions required for broad market adoption. The project objectives were accomplished by: identifying viable technical solutions based on modeling of modern and potential coating stacks and IGU designs; development of new coating material sets for HM thin film stacks, as well as improved HM IGU designs to accept multiple layers of HM films; matching promising new coating designs with new HM IGU designs to demonstrate performance gains; and, in cooperation with a window manufacturer, assess the potential for high-volume manufacturing and cost efficiency ofmore » a HM-based R-10 window with improved solar heat gain characteristics. A broad view of available materials and design options was applied to achieve the desired improvements. Gated engineering methodologies were employed to guide the development process from concept generation to a window demonstration. The project determined that a slightly de-rated window performance allows formulation of a path to achieve the desired cost reductions to support end consumer adoption.« less

Using Focused Laboratory Management and Quality Improvement Projects to Enhance Resident Training and Foster Scholarship

PubMed Central

Ford, Bradley A.; Klutts, J. Stacey; Jensen, Chris S.; Briggs, Angela S.; Robinson, Robert A.; Bruch, Leslie A.; Karandikar, Nitin J.

2017-01-01

Training in patient safety, quality, and management is widely recognized as an important element of graduate medical education. These concepts have been intertwined in pathology graduate medical education for many years, although training programs face challenges in creating explicit learning opportunities in these fields. Tangibly involving pathology residents in management and quality improvement projects has the potential to teach and reinforce key concepts and further fulfill Accreditation Council for Graduate Medical Education goals for pursuing projects related to patient safety and quality improvement. In this report, we present our experience at a pathology residency program (University of Iowa) in engaging pathology residents in projects related to practical issues of laboratory management, process improvement, and informatics. In this program, at least 1 management/quality improvement project, typically performed during a clinical chemistry/management rotation, was required and ideally resulted in a journal publication. The residency program also initiated a monthly management/informatics series for pathology externs, residents, and fellows that covers a wide range of topics. Since 2010, all pathology residents at the University of Iowa have completed at least 1 management/quality improvement project. Many of the projects involved aspects of laboratory test utilization, with some projects focused on other areas such as human resources, informatics, or process improvement. Since 2012, 31 peer-reviewed journal articles involving effort from 26 residents have been published. Multiple projects resulted in changes in ongoing practice, particularly within the hospital electronic health record. Focused management/quality improvement projects involving pathology residents can result in both meaningful quality improvement and scholarly output. PMID:28913416

Using Focused Laboratory Management and Quality Improvement Projects to Enhance Resident Training and Foster Scholarship.

PubMed

Krasowski, Matthew D; Ford, Bradley A; Klutts, J Stacey; Jensen, Chris S; Briggs, Angela S; Robinson, Robert A; Bruch, Leslie A; Karandikar, Nitin J

2017-01-01

Training in patient safety, quality, and management is widely recognized as an important element of graduate medical education. These concepts have been intertwined in pathology graduate medical education for many years, although training programs face challenges in creating explicit learning opportunities in these fields. Tangibly involving pathology residents in management and quality improvement projects has the potential to teach and reinforce key concepts and further fulfill Accreditation Council for Graduate Medical Education goals for pursuing projects related to patient safety and quality improvement. In this report, we present our experience at a pathology residency program (University of Iowa) in engaging pathology residents in projects related to practical issues of laboratory management, process improvement, and informatics. In this program, at least 1 management/quality improvement project, typically performed during a clinical chemistry/management rotation, was required and ideally resulted in a journal publication. The residency program also initiated a monthly management/informatics series for pathology externs, residents, and fellows that covers a wide range of topics. Since 2010, all pathology residents at the University of Iowa have completed at least 1 management/quality improvement project. Many of the projects involved aspects of laboratory test utilization, with some projects focused on other areas such as human resources, informatics, or process improvement. Since 2012, 31 peer-reviewed journal articles involving effort from 26 residents have been published. Multiple projects resulted in changes in ongoing practice, particularly within the hospital electronic health record. Focused management/quality improvement projects involving pathology residents can result in both meaningful quality improvement and scholarly output.

Impact of a competency based curriculum on quality improvement among internal medicine residents.

PubMed

Fok, Mark C; Wong, Roger Y

2014-11-28

Teaching quality improvement (QI) principles during residency is an important component of promoting patient safety and improving quality of care. The literature on QI curricula for internal medicine residents is limited. We sought to evaluate the impact of a competency based curriculum on QI among internal medicine residents. This was a prospective, cohort study over four years (2007-2011) using pre-post curriculum comparison design in an internal medicine residency program in Canada. Overall 175 post-graduate year one internal medicine residents participated. A two-phase, competency based curriculum on QI was developed with didactic workshops and longitudinal, team-based QI projects. The main outcome measures included self-assessment, objective assessment using the Quality Improvement Knowledge Assessment Tool (QIKAT) scores to assess QI knowledge, and performance-based assessment via presentation of longitudinal QI projects. Overall 175 residents participated, with a response rate of 160/175 (91%) post-curriculum and 114/175 (65%) after conducting their longitudinal QI project. Residents' self-reported confidence in making changes to improve health increased and was sustained at twelve months post-curriculum. Self-assessment scores of QI skills improved significantly from pre-curriculum (53.4 to 69.2 percent post-curriculum [p-value 0.002]) and scores were sustained at twelve months after conducting their longitudinal QI projects (53.4 to 72.2 percent [p-value 0.005]). Objective scores using the QIKAT increased post-curriculum from 8.3 to 10.1 out of 15 (p-value for difference <0.001) and this change was sustained at twelve months post-project with average individual scores of 10.7 out of 15 (p-value for difference from pre-curriculum <0.001). Performance-based assessment occurred via presentation of all projects at the annual QI Project Podium Presentation Day. The competency based curriculum on QI improved residents' QI knowledge and skills during residency training. Importantly, residents perceived that their QI knowledge improved after the curriculum and this also correlated to improved QIKAT scores. Experiential QI project work appeared to contribute to sustaining QI knowledge at twelve months.

Project Delivery Methods and Contracting Approaches Available for Implementation by the Texas Department of Transportation

DOT National Transportation Integrated Search

2001-10-01

Public agencies across the country are pursuing innovative project delivery methods such as design-build (D-B) and construction manager-at-risk (CM-at-risk) to improve cycle-time performance on projects, and numerous transportation departments are cu...

From Insurgency to Stability. Volume 1: Key Capabilities and Practices

DTIC Science & Technology

2011-01-01

newly arrived personnel to understand the status of ongoing projects and whether individual contractors are performing to the contract...identifying where project funds are expended wastefully and where performance is substandard). That said, while an improved system to monitor...been disappoint- ing. Experiences there have shown that “capacity - building ” in the jus- tice sector does not necessarily produce better performance

Greenbelt Homes Pilot Program: Summary of Building Envelope Retrofits, Planned HVAC Equipment Upgrades, and Energy Savings

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wiehagen, J.; Del Bianco, M.; Mallay, D.

2015-05-01

In the fall of 2010, a multiyear pilot energy efficiency retrofit project was undertaken by Greenbelt Homes, Inc, (GHI) a 1,566 home cooperative of circa 1930 and 1940 homes in Greenbelt, Maryland. GHI established this pilot project to serve as a basis for decision making for the rollout of a decade-long community-wide upgrade program that will incorporate energy efficiency improvements to the building envelope and mechanical equipment. It presents a unique opportunity to evaluate and prioritize the wide-range of benefits of high-performance retrofits based on member experience with and acceptance of the retrofit measures implemented during the pilot project. Addressingmore » the complex interactions between benefits, trade-offs, construction methods, project management implications, realistic upfront costs, financing, and other considerations, serves as a case study for energy retrofit projects to include high-performance technologies based on the long-term value to the homeowner. The pilot project focused on identifying the added costs and energy savings benefits of improvements.« less

75 FR 42116 - 60-Day Notice of Intention To Request Clearance of Collection of Information; Opportunity for...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-07-20

... develop goals to improve program effectiveness and public accountability and to measure performance related to these goals. The Visitor Survey Card (VSC) project measures performance toward those goals through a short visitor survey card. The project is an element of the NPS Strategic Plan and the...

The maturing of the quality improvement paradigm in the SEL

NASA Technical Reports Server (NTRS)

Basili, Victor R.

1993-01-01

The Software Engineering Laboratory uses a paradigm for improving the software process and product, called the quality improvement paradigm. This paradigm has evolved over the past 18 years, along with our software development processes and product. Since 1976, when we first began the SEL, we have learned a great deal about improving the software process and product, making a great many mistakes along the way. Quality improvement paradigm, as it is currently defined, can be broken up into six steps: characterize the current project and its environment with respect to the appropriate models and metrics; set the quantifiable goals for successful project performance and improvement; choose the appropriate process model and supporting methods and tools for this project; execute the processes, construct the products, and collect, validate, and analyze the data to provide real-time feedback for corrective action; analyze the data to evaluate the current practices, determine problems, record findings, and make recommendations for future project improvements; and package the experience gained in the form of updated and refined models and other forms of structured knowledge gained from this and prior projects and save it in an experience base to be reused on future projects.

Moving from I to Us: The Power of Action Research To Improve Students' Writing Performance.

ERIC Educational Resources Information Center

Miller, A. Christine; Cross, Lorraine

Project WATCH! (Writing Across the Curriculum Hawks!) was the 1999-2000 schoolwide action research project at the A.D. Henderson University School grades K-8. The study question, "How can teachers build schoolwide capacity to support improved student writing across the curriculum?", examined whole-school collaboration where all teachers understand…

Using Group Projects to Teach Process Improvement in a Quality Class

ERIC Educational Resources Information Center

Neidigh, Robert O.

2016-01-01

This paper provides a description of a teaching approach that uses experiential learning to teach process improvement. The teaching approach uses student groups to perform and gather process data in a senior-level quality management class that focuses on Lean Six Sigma. A strategy to link the experiential learning in the group projects to the…

Performance Management and Optimization of Semiconductor Design Projects

NASA Astrophysics Data System (ADS)

Hinrichs, Neele; Olbrich, Markus; Barke, Erich

2010-06-01

The semiconductor industry is characterized by fast technological changes and small time-to-market windows. Improving productivity is the key factor to stand up to the competitors and thus successfully persist in the market. In this paper a Performance Management System for analyzing, optimizing and evaluating chip design projects is presented. A task graph representation is used to optimize the design process regarding time, cost and workload of resources. Key Performance Indicators are defined in the main areas cost, profit, resources, process and technical output to appraise the project.

The Environmental Management Project Manager`s Handbook for improved project definition

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1995-02-01

The United States Department of Energy (DOE) is committed to providing high quality products that satisfy customer needs and are the associated with this goal, DOE personnel must possess the knowledge, skills, and abilities to ensure successful job performance. In addition, there must be recognition that the greatest obstacle to proper project performance is inadequate project definition. Without strong project definition, DOE environmental management efforts are vulnerable to fragmented solutions, duplication of effort, and wastes resources. The primary means of ensuring environmental management projects meet cost and schedule milestones is through a structured and graded approach to project definition, whichmore » is the focus of this handbook.« less

Energy Efficiency Measures to Incorporate into Remodeling Projects

DOE Office of Scientific and Technical Information (OSTI.GOV)

Liaukus, C.

2014-12-01

Energy improvements in a home are often approached as one concerted effort, beginning with a simple walk-through assessment or more in-depth energy audit and followed by the installation of recommended energy measures. While this approach allows for systems thinking to guide the efforts, comprehensive energy improvements of this nature are undertaken by a relatively small number of the households in our nation compared to more piecemeal remodeling efforts. Even when programs like the Weatherization Assistance Program and Home Performance with ENERGY STAR are considered, homes that have had a comprehensive energy makeover still represent a small fraction of the 111.1more » million households. In this report, the U.S Department of Energy Building America Retrofit Alliance research team looks at the improvement of a home's energy performance in an opportunistic way: it examines what can be done to incorporate energy efficiency measures into general remodeling work and home repair projects. This allows for the possibility for people who would not normally pursue energy efficiency but will remodel their kitchen or re-side their home to improve their home's performance at the same time. There are challenges to this approach, not the least of which being that the work will take place over time in potentially many separate projects. The opportunity to improve a home's energy efficiency at one time expands or contracts with the scope of the remodel. As such, guidance on how to do each piece thoughtfully and with consideration for potential future projects, is critical.« less

Annual Report, Fall 2016: Identifying Cost Effective Tank Waste Characterization Approaches

DOE Office of Scientific and Technical Information (OSTI.GOV)

Reboul, S. H.; DiPrete, D. P.

2016-12-12

This report documents the activities that were performed during the second year of a project undertaken to improve the cost effectiveness and timeliness of SRNL’s tank closure characterization practices. The activities performed during the first year of the project were previously reported in SRNL-STI-2015-00144. The scope of the second year activities was divided into the following three primary tasks: 1) develop a technical basis and strategy for improving the cost effectiveness and schedule of SRNL’s tank closure characterization program; 2) initiate the design and assembly of a new waste removal system for improving the throughput and reducing the personnel dosemore » associated with extraction chromatography radiochemical separations; and 3) develop and perform feasibility testing of three alternative radiochemical separation protocols holding promise for improving high resource demand/time consuming tank closure sample analysis methods.« less

Evaluation of rubblization project in Ohio.

DOT National Transportation Integrated Search

2011-03-01

This study was initiated to systematically analyze the performance characteristics of ODOTs completed rubblization and roll (R/R) projects and to develop guidelines regarding improved specifications. : The study was conducted in three parts namely...

Using a Dual Role Assignment to Improve Group Dynamics and Performance: The Effects of Facilitating Social Capital in Teams

ERIC Educational Resources Information Center

Aquino, Karl; Serva, Mark A.

2005-01-01

This article describes a project that simulates the interplay between management and development project teams in a business environment. Each student team was assigned a management role supervising one project and a development role implementing another project. Results indicate that teams that communicate regularly and interact socially outside…

Program/Project Management Resources: A collection of 50 bibliographies focusing on continual improvement, reinventing government, and successful project management

NASA Technical Reports Server (NTRS)

Michaels, Jeffrey

1994-01-01

These Program/Project Management Resource Lists were originally written for the NASA project management community. Their purpose was to promote the use of the NASA Headquarters Library Program/Project Management Collection funded by NASA Headquarters Code FT, Training & Development Division, by offering introductions to the management topics studied by today's managers. Lists were also written at the request of NASA Headquarters Code T, Office of Continual improvements, and at the request of NASA members of the National Performance Review. This is the second edition of the compilation of these bibliographies; the first edition was printed in March 1994.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Maloney, J.; Kiepper, A.F.; Simonetta, R.J.

The volume examines monitoring and reporting procedures applicable to performance and productivity. The managers of three transit systems of varying sizes discuss how productivity has been increased within their systems. The Pittsburgh discussion reviews a variety of capital projects and management improvement initiatives undertaken by Port Authority Transit, including development of maintenance manuals and an absenteeism reduction project. The Houston discussion describes how the property used a management study to identify needed organizational change and restructuring. The Ann Arbor discussion focuses on a set of service standards and performance indicators adopted to focus the management improvement process.

Effects of organizational context on Lean implementation in five hospital systems.

PubMed

Harrison, Michael I; Paez, Kathryn; Carman, Kristin L; Stephens, Jennifer; Smeeding, Lauren; Devers, Kelly J; Garfinkel, Steven

2016-01-01

Despite broad agreement among researchers about the value of examining how context shapes implementation of improvement programs and projects, limited attention has been paid to contextual effects on implementation of Lean. To help reduce gaps in knowledge of effects of intraorganizational context, we researched Lean implementation initiatives in five organizations and examined 12 of their Lean rapid improvement projects. All projects aimed at improving clinical care delivery. On the basis of the literature on Lean, innovation, and quality improvement, we developed a framework of factors likely to affect Lean implementation and outcomes. Drawing on the framework, we conducted semistructured interviews and applied qualitative codes to the transcribed interviews. Available documents, data, and observations supplemented the interviews. We constructed case studies of Lean implementation in each organization, compared implementation across organizations, and compared the 12 projects. Intraorganizational characteristics affecting organization-wide Lean initiatives and often also shaping project outcomes included CEO commitment to Lean and active support for it, prior organizational capacity for quality improvement-based performance improvement, alignment of the Lean initiative with the organizational mission, dedication of resources and experts to Lean, staff training before and during projects, establishment of measurable and relevant project targets, planning of project sequences that enhance staff capabilities and commitment without overburdening them, and ensuring communication between project members and other affected staff. Dependence of projects on inputs of new information technology was a barrier to project success. Incremental implementation of Lean produced reported improvements in operational efficiency and occasionally in care quality. However, even under the relatively favorable circumstances prevailing in our study sites, incremental implementation did not readily change organizational culture. This study should alert researchers, managers, and teachers of management to ways that contexts shape Lean implementation and may affect other types of process redesign and quality improvement.

Putting EVM to the Test

NASA Technical Reports Server (NTRS)

Kerby, Jerald; Counts, Stacy

2005-01-01

IN MANY INSTANCES THERE IS NO FOREWARNING; SCHEDULES slip, costs soar, and the project manager is faced with the near impossible task of explaining why each impact occurred. With contractors performing the majority of the work, the management job can become even more obscure. The simple lack of proximity to the contractor can limit effective communication. Add to that a mixture of cultural differences and a desire for the contractor to portray the most optimistic view of their performance, and you create an even more difficult task for the project manager. This was the scenario when the Habitat Holding Rack (HHR) manager at Marshall Space Flight Center (MSFC), Stacy Counts, was introduced to the overall concept of Earned Value Management (EVM). Faced with increased costs (which eventually resulted in decreased scope of the project), continued schedule slides, and several technical anomalies, she was looking for a way to gain a better handle on the project performance. As a component of the Space Station Biological Research Program (SSBRP), the HHR project is an integral piece of the Program content. The HHR is the first rack hardware to be delivered for the Program and has therefore been the first rack to move through the trials of test and verification-documenting anomalies and technical difficulties that will benefit the other SSBRP rack projects. For these reasons, the HHR maintained high visibility throughout the manufacturing and assembly process, continuing through test and verification activities. Needless to say, the higher visibility emphasized the need for improved performance on this project. And to improve project performance, Stacy first had to figure out how to measure the cost, schedule and technical objectives effectively.

1L Mark-IV Target Design Review

DOE Office of Scientific and Technical Information (OSTI.GOV)

Koehler, Paul E.

This presentation includes General Design Considerations; Current (Mark-III) Lower Tier; Mark-III Upper Tier; Performance Metrics; General Improvements for Material Science; General Improvements for Nuclear Science; Improving FOM for Nuclear Science; General Design Considerations Summary; Design Optimization Studies; Expected Mark-IV Performance: Material Science; Expected Mark-IV Performance: Nuclear Science (Disk); Mark IV Enables Much Wider Range of Nuclear-Science FOM Gains than Mark III; Mark-IV Performance Summary; Rod or Disk? Center or Real FOV?; and Project Cost and Schedule.

Analysis of Factors Influencing Building Refurbishment Project Performance

NASA Astrophysics Data System (ADS)

Ishak, Nurfadzillah; Aswad Ibrahim, Fazdliel; Azizi Azizan, Muhammad

2018-03-01

Presently, the refurbishment approach becomes favourable as it creates opportunities to incorporate sustainable value with other building improvement. In this regard, this approach needs to be implemented due to the issues on overwhelming ratio of existing building to new construction, which also can contribute to the environmental problem. Refurbishment principles imply to minimize the environmental impact and upgrading the performance of an existing building to meet new requirements. In theoretically, building project's performance has a direct bearing on related to its potential for project success. However, in refurbishment building projects, the criteria for measure are become wider because the projects are a complex and multi-dimensional which encompassing many factors which reflect to the nature of works. Therefore, this impetus could be achieve by examine the direct empirical relationship between critical success factors (CSFs) and complexity factors (CFs) during managing the project in relation to delivering success on project performance. The research findings will be expected as the basis of future research in establish appropriate framework that provides information on managing refurbishment building projects and enhancing the project management competency for a better-built environment.

Compressed Air System Overhaul Improves Production at a Powdered Metal Manufacturing Plant (GKN Sinter Metals in Salem, IN)

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

In 1998, GKN Sinter Metals completed a successful compressed air system improvement project at its Salem, Indiana manufacturing facility. The project was performed after GKN undertook a survey of its system in order to solve air quality problems and to evaluate whether the capacity of their compressed air system would meet their anticipated plant expansion. Once the project was implemented, the plant was able to increase production by 31% without having to add any additional compressor capacity.

Research on Joint Sealant Materials to Improve Installation and Performance : Final Report

DOT National Transportation Integrated Search

2017-12-01

The objectives of this project were to 1) identify failure modes and their mechanisms in joint seals in Texas, and to 2) identify what needs to be done to minimize the failures and improve joint seal performance. To achieve these objectives efficient...

Can performance on summative evaluation of wax-added dental anatomy projects be better predicted from the combination of supervised and unsupervised practice than from supervised practice alone?

PubMed

Radjaeipour, G; Chambers, D W; Geissberger, M

2016-11-01

The study explored the effects of adding student-directed projects in pre-clinical dental anatomy laboratory on improving the predictability of students' eventual performance on summative evaluation exercises, given the presence of intervening faculty-controlled, in-class practice. All students from four consecutive classes (n = 555) completed wax-added home projects (HP), spending as much or as little time as desired and receiving no faculty feedback; followed by similar laboratory projects (LP) with time limits and feedback; and then summative practical projects (PP) in a timed format but without faculty feedback. Path analysis was used to assess if the student-directed HP had any effect over and above the laboratory projects. Average scores were HP = 0.785 (SD = 0.089); LP = 0.736 (SD = 0.092); and PP = 0.743 (SD = 0.108). Path analysis was applied to show the effects of including a student-controlled home practice exercise on summative exercise performance. HP contributed 57% direct effect and 37% mediated effect through the LP condition. Student-directed home practice provided a measureable improvement in ability to predict eventual performance in summative test cases over and above the predictive contribution of intervening faculty-controlled practice conditions. © 2015 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Wisconsin K-12 Career Education Consortium. Final Project Performance Report. Volume I of Two Volumes.

ERIC Educational Resources Information Center

Wisconsin State Dept. of Public Instruction, Madison.

To demonstrate career education methods and procedures, seven Wisconsin school districts were chosen to participate in an incremental improvement project. Project activities were conducted district-wide and by individual districts. District-wide dissemination activities involved promoting demonstration packets and assessment/evaluation (AE)…

Services for Children with Deaf-Blindness in Louisiana. Final Performance Report.

ERIC Educational Resources Information Center

Teddlie, Charles

This final report describes activities and accomplishments of the Services for Children with Deaf-Blindness project, a 1-year federally supported project in Louisiana to improve identification and curriculum for these children by providing technical assistance and training to parents, school systems, and agency personnel. Project activities…

Developing a performance data suite to facilitate lean improvement in a chemotherapy day unit.

PubMed

Lingaratnam, Senthil; Murray, Danielle; Carle, Amber; Kirsa, Sue W; Paterson, Rebecca; Rischin, Danny

2013-07-01

A multidisciplinary team from the Peter MacCallum Cancer Centre in Melbourne, Australia, developed a performance data suite to support a service improvement project based on lean manufacturing principles in its 19-chair chemotherapy day unit (CDU) and cytosuite chemotherapy production facility. The aims of the project were to reduce patient wait time and improve equity of access to the CDU. A project team consisting of a pharmacist and CDU nurse supported the management team for 10 months in engaging staff and customers to identify waste in processes, analyze root causes, eliminate non-value-adding steps, reduce variation, and level workloads to improve quality and flow. Process mapping, staff and patient tracking and opinion surveys, medical record audits, and interrogation of electronic treatment records were undertaken. This project delivered a 38% reduction in median wait time on the day (from 32 to 20 minutes; P < .01), 7-day reduction in time to commencement of treatment for patients receiving combined chemoradiotherapy regimens (from 25 to 18 days; P < .01), and 22% reduction in wastage associated with expired drug and pharmacy rework (from 29% to 7%; P < .01). Improvements in efficiency enabled the cytosuite to increase the percentage of product manufactured within 10 minutes of appointment times by 29% (from 47% to 76%; P < .01). A lean improvement methodology provided a robust framework for improved understanding and management of complex system constraints within a CDU, resulting in improved access to treatment and reduced waiting times on the day.

Study of Evaluation OSH Management System Policy Based On Safety Culture Dimensions in Construction Project

NASA Astrophysics Data System (ADS)

Latief, Yusuf; Armyn Machfudiyanto, Rossy; Arifuddin, Rosmariani; Mahendra Fira Setiawan, R.; Yogiswara, Yoko

2017-07-01

Safety Culture in the construction industry is very influential on the socio economic conditions that resulted in the country’s competitiveness. Based on the data, the accident rate of construction projects in Indonesia is very high. In the era of the Asian Economic Community (AEC) Indonesian contractor is required to improve competitiveness, one of which is the implementation of the project without zero accident. Research using primary and secondary data validated the results of the literature experts and questionnaire respondents were analyzed using methods SmartPLS, obtained pattern of relationships between dimensions of safety culture to improve the performance of Safety. The results showed that the behaviors and Cost of Safety into dimensions that significantly affect the performance of safety. an increase in visible policy-based on Regulation of Public Work and Housing No 5/PRT/M/2014 to improve to lower the accident rate.

Improving limited-projection-angle fluorescence molecular tomography using a co-registered x-ray computed tomography scan.

PubMed

Radrich, Karin; Ale, Angelique; Ermolayev, Vladimir; Ntziachristos, Vasilis

2012-12-01

We examine the improvement in imaging performance, such as axial resolution and signal localization, when employing limited-projection-angle fluorescence molecular tomography (FMT) together with x-ray computed tomography (XCT) measurements versus stand-alone FMT. For this purpose, we employed living mice, bearing a spontaneous lung tumor model, and imaged them with FMT and XCT under identical geometrical conditions using fluorescent probes for cancer targeting. The XCT data was employed, herein, as structural prior information to guide the FMT reconstruction. Gold standard images were provided by fluorescence images of mouse cryoslices, providing the ground truth in fluorescence bio-distribution. Upon comparison of FMT images versus images reconstructed using hybrid FMT and XCT data, we demonstrate marked improvements in image accuracy. This work relates to currently disseminated FMT systems, using limited projection scans, and can be employed to enhance their performance.

The Project Protect Infection Prevention Fellowship: A model for advancing infection prevention competency, quality improvement, and patient safety.

PubMed

Reisinger, Janine D; Wojcik, Anna; Jenkins, Ian; Edson, Barbara; Pegues, David A; Greene, Linda

2017-08-01

The Centers for Disease Control and Prevention 2016 Healthcare-Associated Infections (HAI) Progress Report documented no change in catheter-associated urinary tract infections (CAUTIs) between 2009 and 2014. There is a need for investment in additional efforts to reduce HAIs, specifically CAUTI. Quality improvement fellowships are 1 approach to expand the capacity of dedicated leaders and infection prevention champions. The fellowship used a model that expanded collaboration among disciplines and focused on partnership by recruiting a diverse cohort of fellows and by providing 1-on-1 mentoring to enhance leadership development. The curriculum supported the Association for Professionals in Infection Control and Prevention Competency Model in 2 domains: leadership and performance improvement and implementation science. The fellowship was successful. The fellows and mentors had self-reported high level of satisfaction, fellows' knowledge increased, and they demonstrated leadership, quality improvement, and implementation science competency within the completed capstone projects. A model encompassing diverse educational topics, discussions, workshops, and mentorship can serve as a template for developing infection prevention champions. Although this project focused on CAUTI, this template can be used in a variety of settings and applied to a range of other HAIs and performance improvement projects. Copyright © 2017 Association for Professionals in Infection Control and Epidemiology, Inc. All rights reserved.

Teachers' Perceptions of the Educational Platform--Is There a Connection between School Improvement and Regional Educational Development?

ERIC Educational Resources Information Center

Boström, Lena; Dalin, Rolf

2016-01-01

This research examined teachers' attitudes in a school development project, The best regional educational system in the world which focuses on regional development and school improvement. The project was performed in counties in Mid Sweden, which have a lower educational level and school achievements and a competence escape compare with other…

Analytical procedures for determining the impacts of reliability mitigation strategies. [supporting datasets

DOT National Transportation Integrated Search

2012-11-30

The objective of this project was to develop technical relationships between reliability improvement strategies and reliability performance metrics. This project defined reliability, explained the importance of travel time distributions for measuring...

Educational Intervention Improves Compliance With AAN Guidelines for Return Epilepsy Visits: A Quality Improvement Project.

PubMed

Nelson, Gary R; Filloux, Francis M; Kerr, Lynne M

2016-10-01

In 2011, the American Academy of Neurology (AAN) released guidelines for return seizure visits detailing 8 points that should be addressed during such visits. These guidelines are designed to improve routine follow-up care for epilepsy patients. The authors performed a quality improvement project aimed at increasing compliance with these guidelines after educating providers about them. The authors performed a chart review before and after an intervention which included: education regarding the guidelines, providing materials to remind providers of the guidelines, and templates to facilitate compliance. The authors reviewed charts at 2 and 6 months after the intervention. Significant improvement in documentation of 4 of the 8 measures was observed after this educational intervention. This suggests that simple educational interventions may help providers change practice and can improve compliance with new guidelines while requiring minimal time and resources to implement. © The Author(s) 2016.

Firefighters Integrated Response Equipment System

NASA Technical Reports Server (NTRS)

Kaplan, H.; Abeles, F.

1978-01-01

The Firefighters Integrated Response Equipment System (Project FIRES) is a joint National Fire Prevention and Control Administration (NFPCA)/National Aeronautics and Space Administration (NASA) program for the development of an 'ultimate' firefighter's protective ensemble. The overall aim of Project FIRES is to improve firefighter protection against hazards, such as heat, flame, smoke, toxic fumes, moisture, impact penetration, and electricity and, at the same time, improve firefighter performance by increasing maneuverability, lowering weight, and improving human engineering design of his protective ensemble.

Can action research strengthen district health management and improve health workforce performance? A research protocol.

PubMed

Mshelia, C; Huss, R; Mirzoev, T; Elsey, H; Baine, S O; Aikins, M; Kamuzora, P; Bosch-Capblanch, X; Raven, J; Wyss, K; Green, A; Martineau, T

2013-08-30

The single biggest barrier for countries in sub-Saharan Africa (SSA) to scale up the necessary health services for addressing the three health-related Millennium Development Goals and achieving Universal Health Coverage is the lack of an adequate and well-performing health workforce. This deficit needs to be addressed both by training more new health personnel and by improving the performance of the existing and future health workforce. However, efforts have mostly been focused on training new staff and less on improving the performance of the existing health workforce. The purpose of this paper is to disseminate the protocol for the PERFORM project and reflect on the key challenges encountered during the development of this methodology and how they are being overcome. The overall aim of the PERFORM project is to identify ways of strengthening district management in order to address health workforce inadequacies by improving health workforce performance in SSA. The study will take place in three districts each in Ghana, Tanzania and Uganda using an action research approach. With the support of the country research teams, the district health management teams (DHMTs) will lead on planning, implementation, observation, reflection and redefinition of the activities in the study. Taking into account the national and local human resource (HR) and health systems (HS) policies and practices already in place, 'bundles' of HR/HS strategies that are feasible within the context and affordable within the districts' budget will be developed by the DHMTs to strengthen priority areas of health workforce performance. A comparative analysis of the findings from the three districts in each country will add new knowledge on the effects of these HR/HS bundles on DHMT management and workforce performance and the impact of an action research approach on improving the effectiveness of the DHMTs in implementing these interventions. Different challenges were faced during the development of the methodology. These include the changing context in the study districts, competing with other projects and duties for the time of district managers, complexity of the study design, maintaining the anonymity and confidentiality of study participants as well as how to record the processes during the study. We also discuss how these challenges are being addressed. The dissemination of this research protocol is intended to generate interest in the PERFORM project and also stimulate discussion on the use of action research in complex studies such as this on strengthening district health management to improve health workforce performance.

An improved affine projection algorithm for active noise cancellation

NASA Astrophysics Data System (ADS)

Zhang, Congyan; Wang, Mingjiang; Han, Yufei; Sun, Yunzhuo

2017-08-01

Affine projection algorithm is a signal reuse algorithm, and it has a good convergence rate compared to other traditional adaptive filtering algorithm. There are two factors that affect the performance of the algorithm, which are step factor and the projection length. In the paper, we propose a new variable step size affine projection algorithm (VSS-APA). It dynamically changes the step size according to certain rules, so that it can get smaller steady-state error and faster convergence speed. Simulation results can prove that its performance is superior to the traditional affine projection algorithm and in the active noise control (ANC) applications, the new algorithm can get very good results.

What drives continuous improvement project success in healthcare?

PubMed

Stelson, Paul; Hille, Joshua; Eseonu, Chinweike; Doolen, Toni

2017-02-13

Purpose The purpose of this paper is to present findings from a study of factors that affect continuous improvement (CI) project success in hospitals. Design/methodology/approach Quantitative regression analysis was performed on Likert scale survey responses. Qualitative thematic analysis was performed on open-ended survey responses and written reports on CI projects. Findings The paper identifies managerial and employee factors that affect project success. These factors include managerial support, communication, and affective commitment. Affective commitment is the extent to which employees perceive the change as being needed or necessary. Practical implications The results highlight how managerial decisions, approaches to communication - including communication before, during and after CI projects affect project success. The results also show that success depends on the way employees perceive proposed changes. This suggests the need for a more individualized approach to CI, lean, and broader change initiatives. Originality/value This research is the first to fuse project success and sustainability theory to CI projects, beyond Kaizen events, in healthcare environments. The research is particularly important at a time when healthcare organizations are required to make rapid changes with limited resources as they work toward outcome-based assessment and reimbursement rules.

Austin Energy: Pumping System Improvement Project Saves Energy and Improves Performance at a Power Plant

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

This two-page performance spotlight describes how, in 2004, Austin Energy (the electric utility for the city of Austin, Texas) began saving about $1.2 million in energy and maintenance costs annually as a direct result of a pumping system efficiency proj

Business Models for Training and Performance Improvement Departments

ERIC Educational Resources Information Center

Carliner, Saul

2004-01-01

Although typically applied to entire enterprises, the concept of business models applies to training and performance improvement groups. Business models are "the method by which firm[s] build and use [their] resources to offer.. value." Business models affect the types of projects, services offered, skills required, business processes, and type of…

78 FR 53436 - Improving Performance of Federal Permitting and Review of Infrastructure Projects

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-29

... an efficient decision-making process within each agency; to the extent possible, unifying and... IIP Process, the developer is encouraged to inform DOE in writing as soon as possible of its decision... to improve the performance of Federal siting, permitting, and review processes for infrastructure...

Performance evaluation of restaurant food waste and biowaste to biogas pilot projects in China and implications for national policy.

PubMed

De Clercq, Djavan; Wen, Zongguo; Fan, Fei

2017-03-15

The objective of this research was to conduct a performance evaluation of three food waste/biowaste-to-biogas pilot projects across 7 scenarios in China based on multi-criteria decision analysis (MCDA) methodology. The projects ranked included a food waste-biogas project in Beijing, a food waste-biogas project in Suzhou and a co-digestion project producing biomethane in Hainan. The projects were ranked from best to worst based on technical, economic and environmental criteria under the MCDA framework. The results demonstrated that some projects are encountering operational problems. Based on these findings, six national policy recommendations were provided: (1) shift away from capital investment subsidies to performance-based subsidies; (2) re-design feed in tariffs; (3) promote bio-methane and project clustering; (4) improve collection efficiency by incentivizing FW producers to direct waste to biogas projects; (5) incentivize biogas projects to produce multiple outputs; (6) incentivize food waste-based projects to co-digest food waste with other substrates for higher gas output. Copyright © 2016 Elsevier Ltd. All rights reserved.

Performance of newly implemented Environmental Management Systems in primary schools in South Africa.

PubMed

Hens, Luc; Wiedemann, Torsten; Raath, Schalk; Stone, Riana; Renders, Paul; Craenhals, Eric

2010-01-01

Quantitative results from Environmental Management Systems (EMS) at primary schools have rarely been examined in literature. This paper presents the monitoring results of environmental care in 39 primary schools in Northern South Africa. During 2 years, after the EMS was implemented in the curriculum and in the school's management, the progress of environmental performances of the participating schools has been measured, by means of detailed questionnaires, related to four environmental aspects: water, waste, energy and greening. At the beginning of the project, 50% of the schools performed well on water-related environmental actions. Two years later it was 76%. For waste-related activities the improvement was even stronger: from 50% to 100%. The environmental performances of the schools improved also for greening-related actions, from 50% at the start of the project to 64% two years later. Only energy-related activities did not improve significantly with only 24% of all schools performing well at the end of the survey period. In general, the introduction of an EMS succeeded in an improvement of the overall environmental performances of the schools, but cost-intensive activities were less successful than others. Copyright 2009 Elsevier Ltd. All rights reserved.

Enhanced digital mapping project : final report

DOT National Transportation Integrated Search

2004-11-19

The Enhanced Digital Map Project (EDMap) was a three-year effort launched in April 2001 to develop a range of digital map database enhancements that enable or improve the performance of driver assistance systems currently under development or conside...

Lockheed L-1011 Test Station on-board in support of the Adaptive Performance Optimization flight res

NASA Technical Reports Server (NTRS)

1997-01-01

This console and its compliment of computers, monitors and commmunications equipment make up the Research Engineering Test Station, the nerve center for a new aerodynamics experiment being conducted by NASA's Dryden Flight Research Center, Edwards, California. The equipment is installed on a modified Lockheed L-1011 Tristar jetliner operated by Orbital Sciences Corp., of Dulles, Va., for Dryden's Adaptive Performance Optimization project. The experiment seeks to improve the efficiency of long-range jetliners by using small movements of the ailerons to improve the aerodynamics of the wing at cruise conditions. About a dozen research flights in the Adaptive Performance Optimization project are planned over the next two to three years. Improving the aerodynamic efficiency should result in equivalent reductions in fuel usage and costs for airlines operating large, wide-bodied jetliners.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Perrin, Tess E.; Davis, Robert G.; Wilkerson, Andrea M.

This GATEWAY project evaluated four field installations to better understand the long-term performance of a number of LED products, which can hopefully stimulate improvements in designing, manufacturing, specifying, procuring, and installing LED products. Field studies provide the opportunity to discover and investigate issues that cannot be simulated or uncovered in a laboratory, but the installed performance over time of commercially available LED products has not been well documented. Improving long-term performance can provide both direct energy savings by reducing the need to over-light to account for light loss and indirect energy savings through better market penetration due to SSL’s competitivemore » advantages over less-efficient light source technologies. The projects evaluated for this report illustrate that SSL use is often motivated by advantages other than energy savings, including maintenance savings, easier integration with control systems, and improved lighting quality.« less

The Genetics of Biofuel Traits in Panicum Grasses: Developing a Model System with Diploid Panicum Hallii

DOE Office of Scientific and Technical Information (OSTI.GOV)

Juenger, Thomas; Wolfrum, Ed

Our DOE funded project focused on characterizing natural variation in C4 perennial grasses including switchgrass (Panicum virgatum) and Hall’s panicgrass (Panicum hallii). The main theme of our project was to better understand traits linked with plant performance and that impact the utility of plant biomass as a biofuel feedstock. In addition, our project developed tools and resources for studying genetic variation in Panicum hallii. Our project successfully screened both Panicum virgatum and Panicum hallii diverse natural collections for a host of phenotypes, developed genetic mapping populations for both species, completed genetic mapping for biofuel related traits, and helped in themore » development of genomic resources of Panicum hallii. Together, these studies have improved our understanding of the role of genetic and environmental factors in impacting plant performance. This information, along with new tools, will help foster the improvement of perennial grasses for feedstock applications.« less

Military Review: The Professional Journal of the U.S. Army. Volume 89, Number 1, January-February 2009

DTIC Science & Technology

2009-02-01

GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) 5d. PROJECT NUMBER 5e. TASK NUMBER 5f. WORK UNIT NUMBER 7. PERFORMING ORGANIZATION NAME(S...with services in Qarguhliyah, resulting in iraqi government projects to resurface a key road in the area, build a bridge to replace a damaged span...to an iraqi civil conservation force to perform public works functions such as trash removal and municipal improvement projects under the direction

Performance Evaluation and Parameter Identification on DROID III

NASA Technical Reports Server (NTRS)

Plumb, Julianna J.

2011-01-01

The DROID III project consisted of two main parts. The former, performance evaluation, focused on the performance characteristics of the aircraft such as lift to drag ratio, thrust required for level flight, and rate of climb. The latter, parameter identification, focused on finding the aerodynamic coefficients for the aircraft using a system that creates a mathematical model to match the flight data of doublet maneuvers and the aircraft s response. Both portions of the project called for flight testing and that data is now available on account of this project. The conclusion of the project is that the performance evaluation data is well-within desired standards but could be improved with a thrust model, and that parameter identification is still in need of more data processing but seems to produce reasonable results thus far.

Improving Process Heating System Performance v3

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

2016-04-11

Improving Process Heating System Performance: A Sourcebook for Industry is a development of the U.S. Department of Energy (DOE) Advanced Manufacturing Office (AMO) and the Industrial Heating Equipment Association (IHEA). The AMO and IHEA undertook this project as part of an series of sourcebook publications developed by AMO on energy-consuming industrial systems, and opportunities to improve performance. Other topics in this series include compressed air systems, pumping systems, fan systems, steam systems, and motors and drives

Healthy School Environment and Enhanced Educational Performance: The Case of Charles Young Elementary School, Washington, DC.

ERIC Educational Resources Information Center

Berry, Michael A.

This report presents a case study of the renovation of Charles Young Elementary School in Washington, DC, focusing on how an improved school environment contributed to higher levels of educational performance. The school was chosen as a school revitalization demonstration project for the Urban Schools Initiative. The objective of the project was…

Chandler Public Library, Final Performance Report for Library Services and Construction Act (LSCA) Title VI, Library Literacy Program.

ERIC Educational Resources Information Center

Drake, Karen; Rodriguez, Leonard

This final performance report for the Chandler Public Library literacy project for fiscal year 1992 begins with a section that provides quantitative data. The next section compares actual accomplishments to the project goal--to improve the quality of life for illiterate, semiliterate, and non-English-speaking citizens by providing a comprehensive…

Greening America's Capitals - Baton Rouge, LA

EPA Pesticide Factsheets

The design options from this Greening America's Capitals project provide strategies that can improve environmental performance in Baton Rouge by increasing tree canopy, capturing and holding stormwater, and improving natural habitat.

The Oregon Applied Academics Project: Final Report

ERIC Educational Resources Information Center

Pearson, Donna; Richardson, George B.; Sawyer, Jennifer M.

2013-01-01

This report contains the findings of the Oregon Applied Academics research and development project which spanned three academic years from 2010 through 2013. The overall purpose of the project was to develop and implement a technical math course that would meet graduation requirements and improve student performance. The State of Oregon has been…

78 FR 29338 - Applications for New Award; Technical Assistance To Improve State Data Capacity-National...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-05-20

... formative and summative evaluations of the project; Note: The following Web site provides more information... plan, linked to the project's logic model, for a formative evaluation of the project's activities. The plan must describe how the formative evaluation will use clear performance objectives to ensure...

7 CFR Appendix B to Subpart B of... - Technical Reports for Projects With Total Eligible Project Costs of Greater Than $200,000

Code of Federal Regulations, 2014 CFR

2014-01-01

... maintenance of the renewable energy system or energy efficiency improvement will operate or perform as..., and maintenance. Authoritative evidence that project team service providers have the necessary... and shakedown, warranties, insurance, financing, professional services, and operations and maintenance...

7 CFR Appendix B to Subpart B of... - Technical Reports for Projects With Total Eligible Project Costs of Greater Than $200,000

Code of Federal Regulations, 2013 CFR

2013-01-01

... maintenance of the renewable energy system or energy efficiency improvement will operate or perform as..., and maintenance. Authoritative evidence that project team service providers have the necessary... and shakedown, warranties, insurance, financing, professional services, and operations and maintenance...

7 CFR Appendix B to Subpart B of... - Technical Reports for Projects With Total Eligible Project Costs of Greater Than $200,000

Code of Federal Regulations, 2012 CFR

2012-01-01

... maintenance of the renewable energy system or energy efficiency improvement will operate or perform as..., and maintenance. Authoritative evidence that project team service providers have the necessary... and shakedown, warranties, insurance, financing, professional services, and operations and maintenance...

Using Web-Based Peer Benchmarking to Manage the Client-Based Project

ERIC Educational Resources Information Center

Raska, David; Keller, Eileen Weisenbach; Shaw, Doris

2013-01-01

The complexities of integrating client-based projects into marketing courses provide challenges for the instructor but produce richness of context and active learning for the student. This paper explains the integration of Web-based peer benchmarking as a means of improving student performance on client-based projects within a single semester in…

Rural Textile Workers Literacy Enhancement Project. Final Performance Report.

ERIC Educational Resources Information Center

Enterprise State Junior Coll., AL.

This document consists of the final report and sample curricula from the Rural Textile Workers Literacy Enhancement Project. The final report details how the project was initiated in April 1993 to help employees of five textile and apparel manufacturing companies in southeastern Alabama improve their literacy and numeracy skills. A second…

Fuel and Core Design Options to Overcome the Heavy Metal Loading Limit and Improve Performance and Safety of Liquid Salt Cooled Reactors

DOE Office of Scientific and Technical Information (OSTI.GOV)

Petrovic, Bojan; Maldonado, Ivan

2016-04-14

The research performed in this project addressed the issue of low heavy metal loading and the resulting reduced cycle length with increased refueling frequency, inherent to all FHR designs with solid, non-movable fuel based on TRISO particles. Studies performed here focused on AHTR type of reactor design with plate (“plank”) fuel. Proposal to FY12 NEUP entitled “Fuel and Core Design Options to Overcome the Heavy Metal Loading Limit and Improve Performance and Safety of Liquid Salt Cooled Reactors” was selected for award, and the 3-year project started in August 2012. A 4-month NCE was granted and the project completed onmore » December 31, 2015. The project was performed by Georgia Tech (Prof. Bojan Petrovic, PI) and University of Tennessee (Prof. Ivan Maldonado, Co-PI), with a total funding of $758,000 over 3 years. In addition to two Co-PIs, the project directly engaged 6 graduate students (at doctoral or MS level) and 2 postdoctoral researchers. Additionally, through senior design projects and graduate advanced design projects, another 23 undergraduate and 12 graduate students were exposed to and trained in the salt reactor technology. We see this as one of the important indicators of the project’s success and effectiveness. In the process, 1 journal article was published (with 3 journal articles in preparation), together with 8 peer-reviewed full conference papers, 8 peer-reviewed extended abstracts, as well as 1 doctoral dissertation and 2 master theses. The work included both development of models and methodologies needed to adequately analyze this type of reactor, fuel, and its fuel cycle, as well as extensive analyses and optimization of the fuel and core design.« less

Knowledge representation into Ada parallel processing

NASA Technical Reports Server (NTRS)

Masotto, Tom; Babikyan, Carol; Harper, Richard

1990-01-01

The Knowledge Representation into Ada Parallel Processing project is a joint NASA and Air Force funded project to demonstrate the execution of intelligent systems in Ada on the Charles Stark Draper Laboratory fault-tolerant parallel processor (FTPP). Two applications were demonstrated - a portion of the adaptive tactical navigator and a real time controller. Both systems are implemented as Activation Framework Objects on the Activation Framework intelligent scheduling mechanism developed by Worcester Polytechnic Institute. The implementations, results of performance analyses showing speedup due to parallelism and initial efficiency improvements are detailed and further areas for performance improvements are suggested.

Improved analysis tool for concrete pavement : [project summary].

DOT National Transportation Integrated Search

2017-10-01

University of Florida researchers developed 3D-FE models to more accurately predict the behavior of concrete slabs. They also followed up on a project to characterize strain gauge performance for a Florida Department of Transportation (FDOT) concrete...

A low complexity reweighted proportionate affine projection algorithm with memory and row action projection

NASA Astrophysics Data System (ADS)

Liu, Jianming; Grant, Steven L.; Benesty, Jacob

2015-12-01

A new reweighted proportionate affine projection algorithm (RPAPA) with memory and row action projection (MRAP) is proposed in this paper. The reweighted PAPA is derived from a family of sparseness measures, which demonstrate performance similar to mu-law and the l 0 norm PAPA but with lower computational complexity. The sparseness of the channel is taken into account to improve the performance for dispersive system identification. Meanwhile, the memory of the filter's coefficients is combined with row action projections (RAP) to significantly reduce computational complexity. Simulation results demonstrate that the proposed RPAPA MRAP algorithm outperforms both the affine projection algorithm (APA) and PAPA, and has performance similar to l 0 PAPA and mu-law PAPA, in terms of convergence speed and tracking ability. Meanwhile, the proposed RPAPA MRAP has much lower computational complexity than PAPA, mu-law PAPA, and l 0 PAPA, etc., which makes it very appealing for real-time implementation.

Developing a Performance Data Suite to Facilitate Lean Improvement in a Chemotherapy Day Unit

PubMed Central

Lingaratnam, Senthil; Murray, Danielle; Carle, Amber; Kirsa, Sue W.; Paterson, Rebecca; Rischin, Danny

2013-01-01

Purpose: A multidisciplinary team from the Peter MacCallum Cancer Centre in Melbourne, Australia, developed a performance data suite to support a service improvement project based on lean manufacturing principles in its 19-chair chemotherapy day unit (CDU) and cytosuite chemotherapy production facility. The aims of the project were to reduce patient wait time and improve equity of access to the CDU. Methods: A project team consisting of a pharmacist and CDU nurse supported the management team for 10 months in engaging staff and customers to identify waste in processes, analyze root causes, eliminate non–value-adding steps, reduce variation, and level workloads to improve quality and flow. Process mapping, staff and patient tracking and opinion surveys, medical record audits, and interrogation of electronic treatment records were undertaken. Results: This project delivered a 38% reduction in median wait time on the day (from 32 to 20 minutes; P < .01), 7-day reduction in time to commencement of treatment for patients receiving combined chemoradiotherapy regimens (from 25 to 18 days; P < .01), and 22% reduction in wastage associated with expired drug and pharmacy rework (from 29% to 7%; P < .01). Improvements in efficiency enabled the cytosuite to increase the percentage of product manufactured within 10 minutes of appointment times by 29% (from 47% to 76%; P < .01). Conclusion: A lean improvement methodology provided a robust framework for improved understanding and management of complex system constraints within a CDU, resulting in improved access to treatment and reduced waiting times on the day. PMID:23942927

Teaching residents about practice-based learning and improvement.

PubMed

Morrison, Laura J; Headrick, Linda A

2008-08-01

The Accreditation Council for Graduate Medical Education has endorsed practice-based learning and improvement (PBLI) as a core competency for residents. Health professions educators have sought since the early 1990s to incorporate quality improvement principles, methods, and skills into training programs. A literature review indicates that questions remain regarding how to best train physicians to lead the improvement of patient care. The efficacy of two PBLI educational interventions was examined by comparing the performance of participating residents with that of controls. Personal improvement projects (PIPs) and a workshop were implemented to teach PBLI to internal medicine residents. Residents in an ambulatory block rotation were required to complete a PIP. All residents were invited to attend the workshop. Those participating in neither served as controls. An instrument was used to assess applied improvement knowledge for PIP participants at project completion and all residents six to eight months later. Analysis of variance showed no difference between the performance of PIP participants at project completion and PIP participants and controls six to eight months later. A second analysis compared six- to eight-month follow-up data for residents doing PIP only, workshop only, both PIP and workshop, and controls. No significant differences were detected among groups. Interrater reliability for the tool was good. No difference was found between intervention residents and controls in the assessment of their ability to apply improvement knowledge. This suggests that workshops and PIPs alone will not lead to competence in PBLI. Building this competency likely will require more emphasis on experiential learning and resident participation in health care improvement projects.

Distributed Wind Competitiveness Improvement Project

DOE Office of Scientific and Technical Information (OSTI.GOV)

2016-05-01

The Competitiveness Improvement Project (CIP) is a periodic solicitation through the U.S. Department of Energy and its National Renewable Energy Laboratory. Manufacturers of small and medium wind turbines are awarded cost-shared grants via a competitive process to optimize their designs, develop advanced manufacturing processes, and perform turbine testing. The goals of the CIP are to make wind energy cost competitive with other distributed generation technology and increase the number of wind turbine designs certified to national testing standards. This fact sheet describes the CIP and funding awarded as part of the project.

Training and Performance Improvement Professionals' Perspectives on Ethical Challenges during Evaluation

ERIC Educational Resources Information Center

Chyung, Seung Youn; Winiecki, Donald J.; Downing, Jessica L.

2010-01-01

Ethical concerns are rising in the business world. With this in mind, training and performance improvement practitioners, especially during evaluation projects, should be aware of principles and codes of ethics, and their behaviors and decisions should reflect the standards recognized by members of the professional society. A study was conducted…

Design of the DIRECT-project: interventions to increase job resources and recovery opportunities to improve job-related health, well-being, and performance outcomes in nursing homes.

PubMed

Spoor, Ellen; de Jonge, Jan; Hamers, Jan P H

2010-05-28

Because of high demands at work, nurses are at high risk for occupational burnout and physical complaints. The presence of job resources (such as job autonomy or social support) and recovery opportunities could counteract the adverse effect of high job demands. However, it is still unclear how job resources and recovery opportunities can be translated into effective workplace interventions aiming to improve employee health, well-being, and performance-related outcomes. The aim of the current research project is developing and implementing interventions to optimize job resources and recovery opportunities, which may lead to improved health, well-being and performance of nurses. The DIRECT-project (DIsc Risk Evaluating Controlled Trial) is a longitudinal, quasi-experimental field study. Nursing home staff of 4 intervention wards and 4 comparison wards will be involved. Based on the results of a base-line survey, interventions will be implemented to optimize job resources and recovery opportunities. After 12 and 24 month the effect of the interventions will be investigated with follow-up surveys. Additionally, a process evaluation will be conducted to map factors that either stimulated or hindered successful implementation as well as the effectiveness of the interventions. The DIRECT-project fulfils a strong need for intervention research in the field of work, stress, performance, and health. The results could reveal (1) how interventions can be tailored to optimize job resources and recovery opportunities, in order to counteract job demands, and (2) what the effects of these interventions will be on health, well-being, and performance of nursing staff.

Improving the Selection, Classification, and Utilization of Army Enlisted Personnel. Annual Report, 1985 Fiscal Year. Supplement

DTIC Science & Technology

1987-10-01

PERFORMING ORGANIZATION NAME AND ADDRESS 10. PROGRAM ELEMENT, PROJECT, TASK Human Resources Research Organization 2 P 3 QA2 79 9"INiTNUMBERS 1100...classification tests which will validly predict carefully developed measures of job performance . The project addresses the 675,000-person enlisted personnel...are to include both Army-wide job performance measures based on newly developed rating scales, and direct hands-on measures of MOS-specific task

Ten years of experience from interactive ergonomics projects.

PubMed

Eklund, J; Karltun, J

2012-01-01

This paper highlights experiences from ergonomics projects, applying an interactive research approach. The aim of this paper is to summarise experiences from seven interactive ergonomics projects with the aim to improve ergonomics and organizational performance jointly. Results from these seven projects were analysed with a model for assessing sustainable change, including the factors active ownership, professional management, competent project leadership, and involved participants. All factors were found giving support to impact and sustainability of the change projects. However, the role of the researcher is difficult and demanding.

Improving Space Project Cost Estimating with Engineering Management Variables

NASA Technical Reports Server (NTRS)

Hamaker, Joseph W.; Roth, Axel (Technical Monitor)

2001-01-01

Current space project cost models attempt to predict space flight project cost via regression equations, which relate the cost of projects to technical performance metrics (e.g. weight, thrust, power, pointing accuracy, etc.). This paper examines the introduction of engineering management parameters to the set of explanatory variables. A number of specific engineering management variables are considered and exploratory regression analysis is performed to determine if there is statistical evidence for cost effects apart from technical aspects of the projects. It is concluded that there are other non-technical effects at work and that further research is warranted to determine if it can be shown that these cost effects are definitely related to engineering management.

Status of development of LCOS projection displays for F-22A, F/A-18E/F, and JSF cockpits

NASA Astrophysics Data System (ADS)

Kalmanash, Michael H.

2001-09-01

Projection display technology has been found to be an attractive alternative to direct view flat panel displays in many avionics applications. The projection approach permits compact high performance systems to be tailored to specific platform needs while using a complement of commercial off the shelf (COTS) components, including liquid crystal on silicon (LCOS) microdisplay imagers. A common projection engine used on multiple platforms enables improved performance, lower cost and shorter development cycles. This paper provides a status update for projection displays under development for the F-22A, the F/A-18E/F and the Lockheed Joint Strike Fighter (JSF) aircraft.

Improving Organizational Productivity in NASA. Volume 2

NASA Technical Reports Server (NTRS)

1986-01-01

Recognizing that NASA has traditionally been in the forefront of technological change, the NASA Administrator challenged the Agency in 1982 to also become a leader in developing and applying advanced technology and management practices to increase productivity. One of the activities undertaken by the Agency to support this ambitious productivity goal was participation in a 2-year experimental action research project devoted to learning more about improving and assessing the performance of professional organizations. Participating with a dozen private sector organizations, NASA explored the usefulness of a productivity improvement process that addressed all aspects of organizational performance. This experience has given NASA valuable insight into the enhancement of professional productivity. More importantly, it has provided the Agency with a specific management approach that managers and supervisors can effectively use to emphasize and implement continuous improvement. This report documents the experiences of the five different NASA installations participating in the project, describes the improvement process that was applied and refined, and offers recommendations for expanded application of that process. Of particular interest is the conclusion that measuring white collar productivity may be possible, and at a minimum, the measurement process itself is beneficial to management. Volume I of the report provides a project overview, significant findings, and recommendations. Volume II presents individual case studies of the NASA pilot projects that were part of the action research effort.

Hand hygiene in the nursery during diaper changing.

PubMed

Phang, Koh Ni; Maznin, Nur Liyanna; Yip, Wai Kin

2012-12-01

This project aimed to improve hand hygiene practice during diaper changing among nurses working in the nursery. This project was conducted in one of the nurseries in a 935-bed acute care hospital with a sample of 15 nurses. A pre- and post-intervention audit was conducted utilising the Joanna Briggs Institute Practical Application of Clinical Evidence System and Getting Research into Practice module. A revised written workflow, which specified the occasions and process for hand hygiene during diaper changing, was introduced. Modifications to the baby bassinets and nursery were made after barriers to good hand hygiene were identified. The project was carried out over 4 months, from March to June 2011. The post-intervention audit results show an improvement in performing hand washing after changing diapers (20%) and performing the correct steps of hand rubbing (25%). However, the compliance rates decreased for the other criteria that measured whether hand rubbing or hand washing was performed prior to contacting the infant and after wrapping the infant, and whether hand washing was performed correctly. The improvement in compliance with hand washing--the main focus of the new workflow--after changing diapers was especially significant. The results indicated that having a workflow on the occasions and process for hand hygiene during diaper changing was useful in standardising practice. Pre- and post-implementation audits were effective methods for evaluating the effect of translating evidence into practice. However, this project had limited success in improving compliance with hand hygiene. This suggested that more effort is needed to reinforce the importance of hand hygiene and compliance to the proposed workflow. In addition, this project showed that for change to take place successfully, environmental modifications, increased awareness and adequate communication to every staff member are essential. © 2012 The Authors. International Journal of Evidence-Based Healthcare © 2012 The Joanna Briggs Institute.

Project description and crowdfunding success: an exploratory study.

PubMed

Zhou, Mi Jamie; Lu, Baozhou; Fan, Weiguo Patrick; Wang, G Alan

2018-01-01

Existing research on antecedent of funding success mainly focuses on basic project properties such as funding goal, duration, and project category. In this study, we view the process by which project owners raise funds from backers as a persuasion process through project descriptions. Guided by the unimodel theory of persuasion, this study identifies three exemplary antecedents (length, readability, and tone) from the content of project descriptions and two antecedents (past experience and past expertise) from the trustworthy cue of project descriptions. We then investigate their impacts on funding success. Using data collected from Kickstarter, a popular crowdfunding platform, we find that these antecedents are significantly associated with funding success. Empirical results show that the proposed model that incorporated these antecedents can achieve an accuracy of 73 % (70 % in F-measure). The result represents an improvement of roughly 14 percentage points over the baseline model based on informed guessing and 4 percentage points improvement over the mainstream model based on basic project properties (or 44 % improvement of mainstream's performance over informed guessing). The proposed model also has superior true positive and true negative rates. We also investigate the timeliness of project data and find that old project data is gradually becoming less relevant and losing predictive power to newly created projects. Overall, this study provides evidence that antecedents identified from project descriptions have incremental predictive power and can help project owners evaluate and improve the likelihood of funding success.

Managing for Results in America's Great City Schools. A Report of the Performance Measurement and Benchmarking Project

ERIC Educational Resources Information Center

Council of the Great City Schools, 2012

2012-01-01

"Managing for Results in America's Great City Schools, 2012" is presented by the Council of the Great City Schools to its members and the public. The purpose of the project was and is to develop performance measures that can improve the business operations of urban public school districts nationwide. This year's report includes data from 61 of the…

Final Technical Report: Advanced Measurement and Analysis of PV Derate Factors.

DOE Office of Scientific and Technical Information (OSTI.GOV)

King, Bruce Hardison; Burton, Patrick D.; Hansen, Clifford

2015-12-01

The Advanced Measurement and Analysis of PV Derate Factors project focuses on improving the accuracy and reducing the uncertainty of PV performance model predictions by addressing a common element of all PV performance models referred to as “derates”. Widespread use of “rules of thumb”, combined with significant uncertainty regarding appropriate values for these factors contribute to uncertainty in projected energy production.

Quality improvement in childhood obesity management through the maintenance of certification process.

PubMed

Huang, Jeannie S; Chun, Stanford; Sandhu, Amanpreet; Terrones, Laura

2013-11-01

To assess the Health and Obesity: Prevention and Education (HOPE) Curriculum Project, a web-based clinician education program that promotes appropriate screening, prevention, and management of weight among youth by pediatric practitioners, based on the 2007 Expert Committee recommendations. The project currently provides Maintenance of Certification (MOC) Part 4 credit through the American Board of Pediatrics. Participants identified themselves to the HOPE MOC Part 4 program. Enrollees were required to complete all continuing medical education modules (10.5 hours). Knowledge acquisition and self-reported confidence levels related to screening, prevention, and management practices of pediatric obesity were measured using preknowledge and postknowledge questionnaires. Participants were also required to perform a quality improvement project and submit practice performance data from repeated medical chart reviews over time. Knowledge acquisition, self-efficacy, and practice performance data were analyzed using repeated-measures analyses. The 51 participants demonstrated significant improvements in knowledge acquisition and self-efficacy scores after viewing individual modules. In addition, participants demonstrated significant improvements in measured clinical compliance with recommended practices over time. Participation in the HOPE MOC Part 4 program appeared to improve knowledge acquisition, self-efficacy, and physician compliance with recommended practice recommendations for the screening, prevention, and management of pediatric obesity. Further data are required to determine whether such practice-based improvements translate into actual reduction in patient weight and/or reduction in health-related costs related to overweight and obesity in youth. Copyright © 2013 Mosby, Inc. All rights reserved.

A portfolio evaluation framework for air transportation improvement projects

NASA Astrophysics Data System (ADS)

Baik, Hyeoncheol

This thesis explores the application of portfolio theory to the Air Transportation System (ATS) improvement. The ATS relies on complexly related resources and different stakeholder groups. Moreover, demand for air travel is significantly increasing relative to capacity of air transportation. In this environment, improving the ATS is challenging. Many projects, which are defined as technologies or initiatives, for improvement have been proposed and some have been demonstrated in practice. However, there is no clear understanding of how well these projects work in different conditions nor of how they interact with each other or with existing systems. These limitations make it difficult to develop good project combinations, or portfolios that maximize improvement. To help address this gap, a framework for identifying good portfolios is proposed. The framework can be applied to individual projects or portfolios of projects. Projects or portfolios are evaluated using four different groups of factors (effectiveness, time-to-implement, scope of applicability, and stakeholder impacts). Portfolios are also evaluated in terms of interaction-determining factors (prerequisites, co-requisites, limiting factors, and amplifying factors) because, while a given project might work well in isolation, interdependencies between projects or with existing systems could result in lower overall performance in combination. Ways to communicate a portfolio to decision makers are also introduced. The framework is unique because (1) it allows using a variety of available data, and (2) it covers diverse benefit metrics. For demonstrating the framework, an application to ground delay management projects serves as a case study. The portfolio evaluation approach introduced in this thesis can aid decision makers and researchers at universities and aviation agencies such as Federal Aviation Administration (FAA), National Aeronautics and Space Administration (NASA), and Department of Defense (DoD), in more fully evaluating the air transportation improvement projects.

Development of a Tool for Documenting, Tracking, Recording, and Analyzing Improvements to Intersection Sites and Roadway Departures in Curve Locations : Research Project Capsule

DOT National Transportation Integrated Search

2012-09-01

Intermodal transportation : system planning, design, : improvement, performance : evaluation, or economic : assessments include safety : improvements because they : lower the overall cost of : transportation. State Departments of Transportation (DOTs...

The Effects of Team Personality Awareness Exercises on Team Satisfaction and Performance: The Context of Marketing Course Projects

ERIC Educational Resources Information Center

Lancellotti, Matthew P.; Boyd, Thomas

2008-01-01

Marketing courses heavily utilize team projects that can enhance student learning and make students more desirable to recruiters seeking greater teamwork skills and experience from students. Unfortunately team projects that provide opportunities to learn and improve such skills can also be great sources of frustration and dissatisfaction for…

Improving HEI Productivity and Performance through Project Management: Implications from a Benchmarking Case Study

ERIC Educational Resources Information Center

Bryde, David; Leighton, Diana

2009-01-01

As higher education institutions (HEIs) look to be more commercial in their outlook they are likely to become more dependent on the successful implementation of projects. This article reports a benchmarking survey of PM maturity in a HEI, with the purpose of assessing its capability to implement projects. Data were collected via questionnaires…

Final report: Compiled MPI. Cost-Effective Exascale Application Development

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gropp, William Douglas

2015-12-21

This is the final report on Compiled MPI: Cost-Effective Exascale Application Development, and summarizes the results under this project. The project investigated runtime enviroments that improve the performance of MPI (Message-Passing Interface) programs; work at Illinois in the last period of this project looked at optimizing data access optimizations expressed with MPI datatypes.

JPRS Report, Supplement. East Europe: Recent Legislation

DTIC Science & Technology

1991-07-19

land must assure its cultivation and its soil protection . Article 54. Land owners who do not fulfill the obligations stipulated in article 53, will be...phenomena or from economic and social activities. Soil protection and improvement work is based on studies and projects undertaken at the request of...them, by units specializing in such work. The state supports the performance of soil protection and improvement projects, partially or totally

Web-Based Predictive Analytics to Improve Patient Flow in the Emergency Department

NASA Technical Reports Server (NTRS)

Buckler, David L.

2012-01-01

The Emergency Department (ED) simulation project was established to demonstrate how requirements-driven analysis and process simulation can help improve the quality of patient care for the Veterans Health Administration's (VHA) Veterans Affairs Medical Centers (VAMC). This project developed a web-based simulation prototype of patient flow in EDs, validated the performance of the simulation against operational data, and documented IT requirements for the ED simulation.

CF6 Jet Engine Performance Improvement Program: High Pressure Turbine Aerodynamic Performance Improvement

NASA Technical Reports Server (NTRS)

Fasching, W. A.

1980-01-01

The improved single shank high pressure turbine design was evaluated in component tests consisting of performance, heat transfer and mechanical tests, and in core engine tests. The instrumented core engine test verified the thermal, mechanical, and aeromechanical characteristics of the improved turbine design. An endurance test subjected the improved single shank turbine to 1000 simulated flight cycles, the equivalent of approximately 3000 hours of typical airline service. Initial back-to-back engine tests demonstrated an improvement in cruise sfc of 1.3% and a reduction in exhaust gas temperature of 10 C. An additional improvement of 0.3% in cruise sfc and 6 C in EGT is projected for long service engines.

Different paths to high-quality care: three archetypes of top-performing practice sites.

PubMed

Feifer, Chris; Nemeth, Lynne; Nietert, Paul J; Wessell, Andrea M; Jenkins, Ruth G; Roylance, Loraine; Ornstein, Steven M

2007-01-01

Primary care practices use different approaches in their quest for high-quality care. Previous work in the Practice Partner Research Network (PPRNet) found that improved outcomes are associated with strategies to prioritize performance, involve staff, redesign elements of the delivery system, make patients active partners in guideline adherence, and use tools embedded in the electronic medical record. The aim of this study was to examine variations in the adoption of improvements among sites achieving the best outcomes. This study used an observational case study design. A practice-level measure of adherence to clinical guidelines was used to identify the highest performing practices in a network of internal and family medicine practices participating in a national demonstration project. We analyzed qualitative and quantitative information derived from project documents, field notes, and evaluation questionnaires to develop and compare case studies. Nine cases are described. All use many of the same improvement strategies. Differences in the way improvements are organized define 3 distinct archetypes: the Technophiles, the Motivated Team, and the Care Enterprise. There is no single approach that explains the superior performance of high-performing practices, though each has adopted variations of PPRNet's improvement model. Practices will vary in their path to high-quality care. The archetypes could prove to be a useful guide to other practices selecting an overall quality improvement approach.

Evaluation of the Three Gorges Dam project using multi-criteria analysis (MCA) based on a sustainable perspective

NASA Astrophysics Data System (ADS)

Han, Yue; Zheng, Wei; Guo, Junshan; Ma, Yihe; Ding, Junqi; Zhu, Lingkai; Che, Yongqiang; Zhang, Yanpeng

2018-02-01

Abstract . The Three Gorges dam of China is one of the largest and expensive hydropower projects of the world. The four main purposes of the project are flood control,energy production, improved navigation and fresh water supply. The dam project has been completed and running successfully with the potential benefits. However, this project is still a controversial issue among many environmentalists and socialists due to various impacts. This study focuses on the benefit and the impacts of the project, and also evaluates the performance of the project using multi-criteria analysis (MCA) approach from a sustainable perspective. Different sustainability criteria related with the dam project have been identified and used for the ranking and rating process. The final result of MCA comes with this scoring process and pairwise comparison, which evaluates the performance of the project considering different positive and negative aspects.

Technology Base Research Project for electrochemical energy storage

NASA Astrophysics Data System (ADS)

Kinoshita, K.

1985-06-01

The DOE Electrochemical Energy Storage Program is divided into two projects: (1) the exploratory technology development and testing (ETD) project and (2) the technology base research (TBR) project. The role of the TBR Project is to perform supporting research for the advanced battery systems under development by the ETD Project, and to evaluate new systems with potentially superior performance, durability and/or cost characteristics. The specific goal of the TBR Project is to identify the most promising electrochemical technologies and transfer them to industry and/or the ETD Project for further development and scale-up. This report summarizes the research, financial, and management activities relevant to the TBR Project in CY 1984. General problem areas addressed by the project include identification of new electrochemical couples for advanced batteries, determination of technical feasibility of the new couples, improvements in battery components and materials, establishment of engineering principles applicable to electrochemical energy storage and conversion, and the assessment of fuel-cell technology for transportation applications. Major emphasis is given to applied research which will lead to superior performance and lower life-cycle costs. The TBR Project is divided into three major project elements: exploratory research, applied science research, and air systems research.

Impacts of dairy diagnostic teams on herd performance.

PubMed

Weinand, D; Conlin, B J

2003-05-01

This study evaluated impacts of educational diagnostic teams of consultants used to transfer technology to dairy farms. Herd management performance changes were measured by comparing Dairy Herd Improvement data from 38 project farms to data from herds that were geographical contemporaries. The value of focused goals for effecting change was also assessed. Interviews provided producers' perception of project outcomes and insight on organization and conduct of dairy diagnostic teams. Changes observed in project herds were small compared with controls with tendencies for increased herd size and improved milk production per cow. Focused goals had greater impacts on increasing herd size, milk per cow, first lactation peak milk, reducing age at first calving, and percentages of cows with subclinical mastitis. Time, money, facility limitations, labor, and alternative priorities were the most cited constraints to implementing changes. Satisfaction scores of producers were significantly related to the degree that team recommendations were followed. Improved attitudes, quality of life, and financial well-being were benefits listed by a majority of producers from participation in the project. If similar projects were to be offered, 83% said they would participate again, and 69% indicated they would pay at least some of the costs. Project farms served as demonstration farms for 1930 other producers in their respective locales, resulting in a multiplier effect of original advice given by consultant teams. Suggestions by farmer participants for improvements in dairy diagnostic teams included needs for at least some unbiased team members, more frequent meetings, more follow-up on recommendations, and consistency of recommendations with family goals.

Project officer's perspective: quality assurance as a management tool.

PubMed

Heiby, J

1993-06-01

Advances in the management of health programs in less developed countries (LDC) have not kept pace with the progress of the technology used. The US Agency for International Development mandated the Quality Assurance Project (QAP) to provide quality improvement technical assistance to primary health care systems in LDCs while developing appropriate quality assurance (QA) strategies. The quality of health care in recent years in the US and Europe focused on the introduction of management techniques developed for industry into health systems. The experience of the QAP and its predecessor, the PRICOR Project, shows that quality improvement techniques facilitate measurement of quality of care. A recently developed WHO model for the management of the sick child provides scientifically based standards for actual care. Since 1988, outside investigators measuring how LDC clinicians perform have revealed serious deficiencies in quality compared with the program's own standards. This prompted developed of new QA management initiatives: 1) communicating standards clearly to the program staff; 2) actively monitoring actual performance corresponds to these standards; and 3) taking action to improve performance. QA means that managers are expected to monitor service delivery, undertake problem solving, and set specific targets for quality improvement. Quality improvement methods strengthen supervision as supervisors can objectively assess health worker performance. QA strengthens the management functions that support service delivery, e.g., training, records management, finance, logistics, and supervision. Attention to quality can contribute to improved health worker motivation and effective incentive programs by recognition for a job well done and opportunities for learning new skills. These standards can also address patient satisfaction. QA challenges managers to aim for the optimal level of care attainable.

IMPROVING TACONITE PROCESSING PLANT EFFICIENCY BY COMPUTER SIMULATION, Final Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

William M. Bond; Salih Ersayin

2007-03-30

This project involved industrial scale testing of a mineral processing simulator to improve the efficiency of a taconite processing plant, namely the Minorca mine. The Concentrator Modeling Center at the Coleraine Minerals Research Laboratory, University of Minnesota Duluth, enhanced the capabilities of available software, Usim Pac, by developing mathematical models needed for accurate simulation of taconite plants. This project provided funding for this technology to prove itself in the industrial environment. As the first step, data representing existing plant conditions were collected by sampling and sample analysis. Data were then balanced and provided a basis for assessing the efficiency ofmore » individual devices and the plant, and also for performing simulations aimed at improving plant efficiency. Performance evaluation served as a guide in developing alternative process strategies for more efficient production. A large number of computer simulations were then performed to quantify the benefits and effects of implementing these alternative schemes. Modification of makeup ball size was selected as the most feasible option for the target performance improvement. This was combined with replacement of existing hydrocyclones with more efficient ones. After plant implementation of these modifications, plant sampling surveys were carried out to validate findings of the simulation-based study. Plant data showed very good agreement with the simulated data, confirming results of simulation. After the implementation of modifications in the plant, several upstream bottlenecks became visible. Despite these bottlenecks limiting full capacity, concentrator energy improvement of 7% was obtained. Further improvements in energy efficiency are expected in the near future. The success of this project demonstrated the feasibility of a simulation-based approach. Currently, the Center provides simulation-based service to all the iron ore mining companies operating in northern Minnesota, and future proposals are pending with non-taconite mineral processing applications.« less

Flight experience of Solar Mesosphere Explorer's two nickel-cadmium batteries

NASA Technical Reports Server (NTRS)

Faber, J.

1985-01-01

The performance of the power system on the solar mesosphere explorer (SME) since launch is discussed. Predictions for continued operation for the rest of the project mission are also discussed. The SME satellite's power system was characterized by both insufficient loading and excessive battery charging during the first year of the mission. These conditions affected battery performance and jeopardized the long-term mission. Increased loading on selected orbits has improved battery performance. Long term projections indicate steadily increasing temperatures for the remainder of the mission.

Updating and improving methodology for prioritizing highway project locations on the strategic intermodal system : [summary].

DOT National Transportation Integrated Search

2016-05-01

Florida International University researchers examined the existing performance measures and the project prioritization method in the CMP and updated them to better reflect the current conditions and strategic goals of FDOT. They also developed visual...

Improving education and supervision of Queensland X-ray Operators through video conference technology: A teleradiography pilot project.

PubMed

Rawle, Marnie; Oliver, Tanya; Pighills, Alison; Lindsay, Daniel

2017-12-01

X-ray Operator (XO) supervision in Queensland is performed by radiographers in a site removed from the XO site. This has historically been performed by telephone when the XO requires immediate help, as well as post-examination through radiographer review and the provision of written feedback on images produced. This project aimed to improve image quality through the provision of real-time support of XOs by the introduction of video conference (VC) supervision. A 6-month pilot project compared image quality with and without VC supervision. VC equipment was installed in the X-ray room at two rural sites, as well as at the radiographer site, to enable visual and oral supervision. The VC unit enabled visualisation of the X-ray examination technique as it was being undertaken, as well as the images produced prior to transmission to the Picture Archiving and Communication System (PACS). Statistically significant improvement in image quality criteria measures were seen for patient positioning (P = 0.008), image quality (P < 0.001) and diagnostic value (P < 0.001) of images taken during this project. No statistically significant differences were seen during case level assessment in the inclusion of only appropriate imaging (P = 0.06), and the inclusion of unacceptable imaging (P = 0.06), however improvements were seen in both of these criteria. The survey revealed 24.6% of examinations performed would normally have involved the XO contacting the radiographer for assistance, although, assistance was actually provided in 88.3% of examinations. This project has demonstrated that significant improvement in image quality is achievable with VC supervision. A larger study with a control arm that did not receive direct supervision should be used to validate the findings of this study. © 2017 The Authors. Journal of Medical Radiation Sciences published by John Wiley & Sons Australia, Ltd on behalf of Australian Society of Medical Imaging and Radiation Therapy and New Zealand Institute of Medical Radiation Technology.

Federal Motor Carrier Safety Administration’s Advanced System Testing Utilizing a Data Acquisition System on the Highways (FAST DASH) Safety Technology Evaluation Project #2: Driver Monitoring Final Report.

DOT National Transportation Integrated Search

2016-12-01

An independent evaluation of a non-video-based onboard monitoring system (OBMS) was conducted. The objective was to determine if the OBMS system performed reliably, improved driving safety and performance, and improved fuel efficiency in a commercial...

Using Performance Tasks to Improve Quantitative Reasoning in an Introductory Mathematics Course

ERIC Educational Resources Information Center

Kruse, Gerald; Drews, David

2013-01-01

A full-cycle assessment of our efforts to improve quantitative reasoning in an introductory math course is described. Our initial iteration substituted more open-ended performance tasks for the active learning projects than had been used. Using a quasi-experimental design, we compared multiple sections of the same course and found non-significant…

Federal Motor Carrier Safety Administration’s advanced system testing utilizing a data acquisition system on the highways (FAST DASH) safety technology evaluation project #2 : driver monitoring, final report.

DOT National Transportation Integrated Search

2016-11-01

An independent evaluation of a non-video-based onboard monitoring system (OBMS) was conducted. The objective was to determine if the OBMS system performed reliably, improved driving safety and performance, and improved fuel efficiency in a commercial...

Improved low temperature performance of lithium ion cells with low ethylene carbonate content electrolytes

NASA Technical Reports Server (NTRS)

Smart, M.; Ratnakumar, B. V.; Surampudi, S.; Crott, H.; Tice, D.; Staniewicz, R.

2001-01-01

Lithium-ion rechargeable batteries are being developed for various aerospace applications under a NASA-DoD interagency program. For the projected missions, lithium ion batteries need to be further improved, i.e., low temperature performance for Mars Landers, Rovers, and Penetrators and cycle life for the Orbiters and LEO and GEO satellites.

Research Linking Teacher Preparation and Student Performance: Teacher Education Yearbook XII

ERIC Educational Resources Information Center

Guyton, Edith M., Ed.; Dangel, Julie Rainer, Ed.

2004-01-01

The case studies, research, and projects presented here strike at the very heart of effective teaching. The specific practices to improve student performance will spark classroom discussion and improve teacher practice. After a foreword by Frances van Tassell and an introduction by Edith M. Guyton and Julie Rainer Dangel, this book is divided into…

Performance excellence: using Lean Six Sigma tools to improve the US Army behavioral health surveillance process, boost team morale, and maximize value to customers and stakeholders.

PubMed

Watkins, Eren Youmans; Kemeter, Dave M; Spiess, Anita; Corrigan, Elizabeth; Kateley, Keri; Wills, John V; Mancha, Brent Edward; Nichols, Jerrica; Bell, Amy Millikan

2014-01-01

Lean Six Sigma (LSS) is a process improvement, problem-solving methodology used in business and manufacturing to improve the speed, quality, and cost of products. LSS can also be used to improve knowledge-based products integral to public health surveillance. An LSS project by the Behavioral Social Health Outcomes Program of the Army Institute of Public Health reduced the number of labor hours spent producing the routine surveillance of suicidal behavior publication. At baseline, the total number of labor hours was 448; after project completion, total labor hours were 199. Based on customer feedback, publication production was reduced from quarterly to annually. Process improvements enhanced group morale and established best practices in the form of standard operating procedures and business rules to ensure solutions are sustained. LSS project participation also fostered a change in the conceptualization of tasks and projects. These results demonstrate that LSS can be used to inform the public health process and should be considered a viable method of improving knowledge-based products and processes.

MFIX-DEM Phi: Performance and Capability Improvements Towards Industrial Grade Open-source DEM Framework with Integrated Uncertainty Quantification

DOE Office of Scientific and Technical Information (OSTI.GOV)

GEL, Aytekin; Jiao, Yang; Emady, Heather

Two major challenges hinder the effective use and adoption of multiphase computational fluid dynamics tools by the industry. The first is the need for significant computational resources, which is inversely proportional to the accuracy of solutions due to computational intensity of the algorithms. The second barrier is assessing the prediction credibility and confidence in the simulation results. In this project, a multi-tiered approach has been proposed under four broad activities to overcome these challenges while addressing all of the objectives outlined in FOA-0001238 through Phases 1 and 2 of the project. The present report consists of the results for onlymore » Phase 1, which was the funded performance period. From the start the project, all of the objectives outlined in FOA were addressed through four major activity tasks in an integrated and balanced fashion to improve adoption of MFIX suite of solvers for industrial use. The first task aimed to improve the performance of MFIX-DEM specifically targeting to acquire the peak performance on Intel Xeon and Xeon Phi based systems, which are expected to be one of the primary high-performance computing platforms both affordable and available for the industrial users in the next two to five years. However, due to a number of changes in course of the project, the scope of the performance improvements related task was significantly reduced to avoid duplicate work. Hence, more emphasis was placed on the other three tasks as discussed below.The second task aimed at physical modeling enhancements through implementation of polydispersity capability and validation of heat transfer models in MFIX. An extended verification and validation (V&V) study was performed for the new polydispersity feature implemented in MFIX-DEM both for granular and coupled gas-solid flows. The features of the polydispersity capability and results for an industrially relevant problem were disseminated through journal papers (one published and one under review at the time of writing of the final technical report). As part of the validation efforts, another industrially relevant problem of interest based on rotary drums was studied for several modes of heat transfer and results were presented in conferences. Third task was aimed towards an important and unique contribution of the project, which was to develop a unified uncertainty quantification framework by integrating MFIX-DEM with a graphical user interface (GUI) driven uncertainty quantification (UQ) engine, i.e., MFIX-GUI and PSUADE. The goal was to enable a user with only modest knowledge of statistics to effectively utilize the UQ framework offered with MFIX-DEM Phi to perform UQ analysis routinely. For Phase 1, a proof-of-concept demonstration of the proposed framework was completed and shared. Direct industry involvement was one of the key virtues of this project, which was performed through forth task. For this purpose, even at the proposal stage, the project team received strong interest in the proposed capabilities from two major corporations, which were further expanded throughout Phase 1 and a new collaboration with another major corporation from chemical industry was also initiated. The level of interest received and continued collaboration for the project during Phase 1 clearly shows the relevance and potential impact of the project for the industrial users.« less

Module 1--Shared Leadership. School Improvement Specialist Training Materials: Performance Standards, Improving Schools, and Literature Review

ERIC Educational Resources Information Center

Appalachia Educational Laboratory at Edvantia (NJ1), 2005

2005-01-01

The School Improvement Specialist Project prepared seven modules. School improvement specialists, as defined by the Appalachia Educational Laboratory at Edvantia, are change agents who work with schools to help them improve in the following areas so as to increase student achievement. These modules are intended to provide training materials for…

Module 4--Effective Teaching. School Improvement Specialist Training Materials: Performance Standards, Improving Schools, and Literature Review

ERIC Educational Resources Information Center

Appalachia Educational Laboratory at Edvantia (NJ1), 2005

2005-01-01

The School Improvement Specialist Project prepared seven modules. School improvement specialists, as defined by the Appalachia Educational Laboratory at Edvantia, are change agents who work with schools to help them improve in the following areas so as to increase student achievement. These modules are intended to provide training materials for…

Module 2--Learning Culture. School Improvement Specialist Training Materials: Performance Standards, Improving Schools, and Literature Review

ERIC Educational Resources Information Center

Appalachia Educational Laboratory at Edvantia (NJ1), 2005

2005-01-01

The School Improvement Specialist Project prepared seven modules. School improvement specialists, as defined by the Appalachia Educational Laboratory at Edvantia, are change agents who work with schools to help them improve in the following areas so as to increase student achievement. These modules are intended to provide training materials for…

What Works to Reduce Unnecessary Care for Bronchiolitis? A Qualitative Analysis of a National Collaborative.

PubMed

Ralston, Shawn L; Atwood, Emily Carson; Garber, Matthew D; Holmes, Alison Volpe

2017-03-01

Unnecessary care is well established as a quality problem affecting acute viral bronchiolitis, one of the most common pediatric illnesses. Although there is an extensive quality improvement literature on the disease, published work primarily reflects the experience of freestanding children's hospitals. We sought to better understand the specific barriers and drivers for successful quality improvement in community and nonfreestanding children's facilities. We undertook a mixed methods study to identify correlates of success in a bronchiolitis quality improvement collaborative of community hospitals and children's hospitals within adult hospitals. We assessed site demographic characteristics, compliance with project interventions, and team engagement for association with end of project performance. We then used performance quartiles on a composite assessment of project measures (use of bronchodilators and steroids) to design a purposive sample of sites approached for qualitative interviews. Team engagement was the only factor quantitatively associated with better performance in the overall cohort. Fifteen sites, from the total cohort of 21, completed qualitative interviews. Qualitative themes around team engagement, including the presence of buy-in for successful sites and the inability to engage colleagues at unsuccessful sites, were important differentiating factors between top and bottom performance quartiles. Regardless of performance quartile, most programs cited intrainstitutional competition for limited resources to do quality improvement work as a specific barrier for pediatrics. The ability to overcome such barriers and specifically garner information technology (IT) resources also differentiated the top and bottom performance quartiles. Team engagement showed a consistent association with success across our quantitative and qualitative evaluations. Competition for limited resources in this cohort of nonfreestanding children's programs, particularly those in hospital IT, was a key qualitative theme. Copyright © 2016 Academic Pediatric Association. Published by Elsevier Inc. All rights reserved.

Translating 10 lessons from lean six sigma project in paper-based training site to electronic health record-based primary care practice: challenges and opportunities.

PubMed

Aleem, Sohaib

2013-01-01

Lean Six Sigma is a well-proven methodology to enhance the performance of any business, including health care. The strategy focuses on cutting out waste and variation from the processes to improve the value and efficiency of work. This article walks through the journey of "green belt" training using a Lean Six Sigma approach and the implementation of a process improvement project that focused on wait time for patients to be examined in an urban academic primary care clinic without requiring added resources. Experiences of the training and the project at an urban paper-based satellite clinic have informed the planning efforts of a data and performance team, including implementing a 15-minute nurse "pre-visit" at primary care sites of an accountable care organization.

Infrastructure for Large-Scale Quality-Improvement Projects: Early Lessons from North Carolina Improving Performance in Practice

ERIC Educational Resources Information Center

Newton, Warren P.; Lefebvre, Ann; Donahue, Katrina E.; Bacon, Thomas; Dobson, Allen

2010-01-01

Introduction: Little is known regarding how to accomplish large-scale health care improvement. Our goal is to improve the quality of chronic disease care in all primary care practices throughout North Carolina. Methods: Methods for improvement include (1) common quality measures and shared data system; (2) rapid cycle improvement principles; (3)…

RECOVERY ACT - Methods for Decision under Technological Change Uncertainty and Risk Assessment for Integrated Assessment of Climate Change

DOE Office of Scientific and Technical Information (OSTI.GOV)

Webster, Mort David

2015-03-10

This report presents the final outcomes and products of the project as performed at the Massachusetts Institute of Technology. The research project consists of three main components: methodology development for decision-making under uncertainty, improving the resolution of the electricity sector to improve integrated assessment, and application of these methods to integrated assessment. Results in each area is described in the report.

The Literature Review of Analytical Support to Defence Transformation: Lessons Learned from Turkish Air Force Transformation Activities

DTIC Science & Technology

2010-04-01

available [11]. Additionally, Table-3 is a guide for DMAIC methodology including 29 different methods [12]. RTO-MP-SAS-081 6 - 4 NATO UNCLASSIFIED NATO...Table 3: DMAIC Methodology (5-Phase Methodology). Define Measure Analyze Improve Control Project Charter Prioritization Matrix 5 Whys Analysis...Methodology Scope [13] DMAIC PDCA Develop performance priorities This is a preliminary stage that precedes specific improvement projects, and the aim

American River College Beacon Project Student Catalyst Program: Peer Assisted Learning. Annual Report, 1992-93.

ERIC Educational Resources Information Center

Reitz, Nancy; McCuen, Sharon

American River College's (California) Peer Assisted Learning (PAL) project is a 2-year project initiated in 1992 to improve the retention and performance of minority students and others in math, biology, and chemistry through increased contact and involvement with their peers. PAL involves a cadre of 24 student Learning Assistants (LA's) who have…

Plausible role for CHW peer support groups in increasing care-seeking in an integrated community case management project in Rwanda: a mixed methods evaluation.

PubMed

Langston, Anne; Weiss, Jennifer; Landegger, Justine; Pullum, Thomas; Morrow, Melanie; Kabadege, Melene; Mugeni, Catherine; Sarriot, Eric

2014-08-01

The Kabeho Mwana project (2006-2011) supported the Rwanda Ministry of Health (MOH) in scaling up integrated community case management (iCCM) of childhood illness in 6 of Rwanda's 30 districts. The project trained and equipped community health workers (CHWs) according to national guidelines. In project districts, Kabeho Mwana staff also trained CHWs to conduct household-level health promotion and established supervision and reporting mechanisms through CHW peer support groups (PSGs) and quality improvement systems. The 2005 and 2010 Demographic and Health Surveys were re-analyzed to evaluate how project and non-project districts differed in terms of care-seeking for fever, diarrhea, and acute respiratory infection symptoms and related indicators. We developed a logit regression model, controlling for the timing of the first CHW training, with the district included as a fixed categorical effect. We also analyzed qualitative data from the final evaluation to examine factors that may have contributed to improved outcomes. While there was notable improvement in care-seeking across all districts, care-seeking from any provider for each of the 3 conditions, and for all 3 combined, increased significantly more in the project districts. CHWs contributed a larger percentage of consultations in project districts (27%) than in non-project districts (12%). Qualitative data suggested that the PSG model was a valuable sub-level of CHW organization associated with improved CHW performance, supervision, and social capital. The iCCM model implemented by Kabeho Mwana resulted in greater improvements in care-seeking than those seen in the rest of the country. Intensive monitoring, collaborative supervision, community mobilization, and CHW PSGs contributed to this success. The PSGs were a unique contribution of the project, playing a critical role in improving care-seeking in project districts. Effective implementation of iCCM should therefore include CHW management and social support mechanisms. Finally, re-analysis of national survey data improved evaluation findings by providing impact estimates.

Alaska road weather project : technical performance assessment report Fairbanks field demonstration 2013-2014.

DOT National Transportation Integrated Search

2014-02-01

The Alaska Department of Transportation and Public Facilities began implementation of a Maintenance Decision Support System in an : effort to improve snow and ice control in the Fairbanks area. As part of the project the reliability of the weather fo...

Examples of actions that improve partnering cooperation among the participants of construction projects

NASA Astrophysics Data System (ADS)

Radziszewska-Zielina, E.; Szewczyk, B.

2017-10-01

The aim of the article is to present examples of actions that can be undertaken in order to improve partnering cooperation in construction projects. These actions are a practical supplementation to the previously developed fuzzy system of controlling partnering relations in construction projects. The actions relate to 18 parameters of partnering relations that describe cooperation between a general contractor or a company that manages the project and four other participants: the contractors (subcontractors), the designer, the material and equipment suppliers and the real estate developer. The actions have been listed based on a review of subject literature, self-analysis, as well as interviews with participants of construction projects. They can provide examples of good practices that maintain partnering cooperation at a high level. Good cooperation, in turn, translates into a better performance of the project.

Tissue Classification

DOE Office of Scientific and Technical Information (OSTI.GOV)

Robinson, David Gerald

The project began as a e ort to support InLight and Lumidigm. With the sale of the companies to a non-New Mexico entity, the project then focused on supporting a new company Medici Technologies. The Small Business (SB) is attempting to quantify glucose in tissue using a series of short interferometer scans of the nger. Each scan is produced from a novel presentation of the nger to the device. The intent of the project is to identify and, if possible, implement improved methods for classi cation, feature selection, and training to improve the performance of predictive algorithms used for tissuemore » classi cation.« less

Power Take-off System for Marine Renewable Devices, CRADA Number CRD-14-566

DOE Office of Scientific and Technical Information (OSTI.GOV)

Muljadi, Eduard

Ocean Renewable Power Company (ORPC) proposes a project to develop and test innovative second-generation power take-off (PTO) components for the U.S. Department of Energy's 2013 FOA: Marine and Hydrokinetic System Performance Advancement, Topic Area 2 (Project). Innovative PTO components will include new and improved designs for bearings, couplings and a subsea electrical generator. Specific project objectives include the following: (1) Develop components for an advanced PTO suitable for MHK devices; (2) Bench test these components; (3) Assess the component and system performance benefits; (4) Perform a system integration study to integrate these components into an ORPC hydrokinetic turbine. National Renewablemore » Energy Laboratory (NREL) will participate on the ORPC lead team to review design of the generator and will provide guidance on the design. Based on inputs from the project team, NREL will also provide an economic analysis of the impacts of the proposed system performance advancements.« less

Design of the DIRECT-project: interventions to increase job resources and recovery opportunities to improve job-related health, well-being, and performance outcomes in nursing homes

PubMed Central

2010-01-01

Background Because of high demands at work, nurses are at high risk for occupational burnout and physical complaints. The presence of job resources (such as job autonomy or social support) and recovery opportunities could counteract the adverse effect of high job demands. However, it is still unclear how job resources and recovery opportunities can be translated into effective workplace interventions aiming to improve employee health, well-being, and performance-related outcomes. The aim of the current research project is developing and implementing interventions to optimize job resources and recovery opportunities, which may lead to improved health, well-being and performance of nurses. Methods/design The DIRECT-project (DIsc Risk Evaluating Controlled Trial) is a longitudinal, quasi-experimental field study. Nursing home staff of 4 intervention wards and 4 comparison wards will be involved. Based on the results of a base-line survey, interventions will be implemented to optimize job resources and recovery opportunities. After 12 and 24 month the effect of the interventions will be investigated with follow-up surveys. Additionally, a process evaluation will be conducted to map factors that either stimulated or hindered successful implementation as well as the effectiveness of the interventions. Discussion The DIRECT-project fulfils a strong need for intervention research in the field of work, stress, performance, and health. The results could reveal (1) how interventions can be tailored to optimize job resources and recovery opportunities, in order to counteract job demands, and (2) what the effects of these interventions will be on health, well-being, and performance of nursing staff. PMID:20509923

Projecting effects of improvements in passive safety of the New Zealand light vehicle fleet.

PubMed

Keall, Michael; Newstead, Stuart; Jones, Wayne

2007-09-01

In the year 2000, as part of the process for setting New Zealand road safety targets, a projection was made for a reduction in social cost of 15.5 percent associated with improvements in crashworthiness, which is a measure of the occupant protection of the light passenger vehicle fleet. Since that document was produced, new estimates of crashworthiness have become available, allowing for a more accurate projection. The objective of this paper is to describe a methodology for projecting changes in casualty rates associated with passive safety features and to apply this methodology to produce a new prediction. The shape of the age distribution of the New Zealand light passenger vehicle fleet was projected to 2010. Projected improvements in crashworthiness and associated reductions in social cost were also modeled based on historical trends. These projections of changes in the vehicle fleet age distribution and of improvements in crashworthiness together provided a basis for estimating the future performance of the fleet in terms of secondary safety. A large social cost reduction of about 22 percent for 2010 compared to the year 2000 was predicted due to the expected huge impact of improvements in passive vehicle features on road trauma in New Zealand. Countries experiencing improvements in their vehicle fleets can also expect significant reductions in road injury compared to a less crashworthy passenger fleet. Such road safety gains can be analyzed using some of the methodology described here.

Overview of Progress on the LANSCE Accelerator and Target Facilities Improvement Program

NASA Astrophysics Data System (ADS)

Macek, R. J.; Brun, T.; Donahue, J. B.; Fitzgerald, D. H.

1997-05-01

Three projects to improve the performance of the accelerator and target facilities for the Los Alamos Neutron Science Center have been initiated since 1994. The LANSCE Reliability Improvement Project was separated into two phases. Phase I, completed in 1995, was targeted at near-term improvements to beam availability that could be completed in a year. Phase II, now underway, consists of two projects: 1) converting the beam injection into the Proton Storage Ring (PSR) from the present two-step process H^- to H^0 to H^+) to direct injection of H^- beam in one step (H^- to H^+), and 2) an upgrade of the spallation neutron production target which will reduce the target change-out time from about a year to about three weeks. The third project, the SPSS Enhancement Project, is aimed at increasing the PSR output beam current from the present 70 μA at 20 Hz to 200 μA at 30 Hz, plus implementing seven new neutron scattering instruments. Objectives, plans, results and progress to date will be summarized.

Project Career: An individualized postsecondary approach to promoting independence, functioning, and employment success among students with traumatic brain injuries.

PubMed

Minton, Deborah; Elias, Eileen; Rumrill, Phillip; Hendricks, Deborah J; Jacobs, Karen; Leopold, Anne; Nardone, Amanda; Sampson, Elaine; Scherer, Marcia; Gee Cormier, Aundrea; Taylor, Aiyana; DeLatte, Caitlin

2017-09-14

Project Career is a five-year interdisciplinary demonstration project funded by NIDILRR. It provides technology-driven supports, merging Cognitive Support Technology (CST) evidence-based practices and rehabilitation counseling, to improve postsecondary and employment outcomes for veteran and civilian undergraduate students with traumatic brain injury (TBI). Provide a technology-driven individualized support program to improve career and employment outcomes for students with TBI. Project staff provide assessments of students' needs relative to assistive technology, academic achievement, and career preparation; provide CST training to 150 students; match students with mentors; provide vocational case management; deliver job development and placement assistance; and maintain an electronic portal regarding accommodation and career resources. Participating students receive cognitive support technology training, academic enrichment, and career preparatory assistance from trained professionals at three implementation sites. Staff address cognitive challenges using the 'Matching Person with Technology' assessment to accommodate CST use (iPad and selected applications (apps)). JBS International (JBS) provides the project's evaluation. To date, 117 students participate with 63% report improved life quality and 75% report improved academic performance. Project Career provides a national model based on best practices for enabling postsecondary students with TBI to attain academic, employment, and career goals.

Quality improvement primer part 1: Preparing for a quality improvement project in the emergency department.

PubMed

Chartier, Lucas B; Cheng, Amy H Y; Stang, Antonia S; Vaillancourt, Samuel

2018-01-01

Emergency medicine (EM) providers work in a fast-paced and often hectic environment that has a high risk for patient safety incidents and gaps in the quality of care. These challenges have resulted in opportunities for frontline EM providers to play a role in quality improvement (QI) projects. QI has developed into a mature field with methodologies that can dramatically improve the odds of having a successful project with a sustainable impact. However, this expertise is not yet commonly taught during professional training. In this first of three articles meant as a QI primer for EM clinicians, we will introduce QI methodology and strategic planning using a fictional case study as an example. We will review how to identify a QI problem, define components of an effective problem statement, and identify stakeholders and core change team members. We will also describe three techniques used to perform root cause analyses-Ishikawa diagrams, Pareto charts and process mapping-and how they relate to preparing for a QI project. The next two papers in this series will focus on the execution of the QI project itself using rapid-cycle testing and on the evaluation and sustainability of QI projects.

Relationship between organizational factors and performance among pay-for-performance hospitals.

PubMed

Vina, Ernest R; Rhew, David C; Weingarten, Scott R; Weingarten, Jason B; Chang, John T

2009-07-01

The Centers for Medicare & Medicaid Services (CMS)/Premier Hospital Quality Incentive Demonstration (HQID) project aims to improve clinical performance through a pay-for-performance program. We conducted this study to identify the key organizational factors associated with higher performance. An investigator-blinded, structured telephone survey of eligible hospitals' (N = 92) quality improvement (QI) leaders was conducted among HQID hospitals in the top 2 or bottom 2 deciles submitting performance measure data from October 2004 to September 2005. The survey covered topics such as QI interventions, data feedback, physician leadership, support for QI efforts, and organizational culture. More top performing hospitals used clinical pathways for the treatment of AMI (49% vs. 15%, p < 0.01), HF (44% vs. 18%, p < 0.01), PN (38% vs. 13%, p < 0.01) and THR/TKR (56% vs. 23%, p < 0.01); organized into multidisciplinary teams to manage patients with AMI (93% vs. 77%, p < 0.05) and HF (93% vs. 69%, p < 0.01); used order sets for the treatment of THR/TKR (91% vs. 64%, p < 0.01); and implemented computerized physician order entry in the hospital (24.4% vs. 7.9%, p < 0.05). Finally, more top performers reported having adequate human resources for QI projects (p < 0.01); support of the nursing staff to increase adherence to quality indicators (p < 0.01); and an organizational culture that supported coordination of care (p < 0.01), pace of change (p < 0.01), willingness to try new projects (p < 0.01), and a focus on identifying system errors rather than blaming individuals (p < 0.05). Organizational structure, support, and culture are associated with high performance among hospitals participating in a pay-for-performance demonstration project. Multiple organizational factors remain important in optimizing clinical care.

A quality improvement project to improve admission temperatures in very low birth weight infants.

PubMed

Lee, H C; Ho, Q T; Rhine, W D

2008-11-01

To review the results of a quality improvement (QI) project to improve admission temperatures of very low birth weight inborn infants. The neonatal intensive care unit at Lucile Packard Children's Hospital underwent a QI project to address hypothermic preterm newborns by staff education and implementing processes such as polyethylene wraps and chemical warming mattresses. We performed retrospective chart review of all inborn infants with birth weight <1500 g during the 18 months prior to (n=134) and 15 months after (n=170) the implementation period. Temperatures were compared between periods. Multivariable logistic regression was used to account for potential confounding variables. We compared mortality rates and grade 3 or 4 intraventricular hemorrhage rates between periods. The mean temperature rose from 35.4 to 36.2 degrees C (P<0.0001) after the QI project. The improvement was consistent and persisted over a 15-month period. After risk adjustment, the strongest predictor of hypothermia was being born in the period before implementation of the QI project (odds ratio 8.12, 95% confidence interval 4.63, 14.22). Although cesarean delivery was a strong risk factor for hypothermia prior to the project, it was no longer significant after the project. There was no significant difference in death or intraventricular hemorrhage detected between periods. There was a significant improvement in admission temperatures after a QI project, which persisted beyond the initial implementation period. Although there was no difference in mortality or intraventricular hemorrhage rates, we did not have sufficient power to detect small differences in these outcomes.

An improvement project within urological care.

PubMed

Khatami, Annelie; Rosengren, Kristina

2015-01-01

The purpose of this paper is to describe staff experiences in an on-going improvement project regarding patients with ureteral stones. A qualitative descriptive study based on eight group interviews and 48 narratives, was performed. Data were analysed using qualitative content analysis. Trustworthiness was ensured by using a well-documented improvement process method during six months. The results formed three categories: an absent comprehensive view; complexity; and vulnerability within the organisation. A holistic perspective regarding urological care at the micro-, meso- and macro-levels is needed to improve planning and caring processes. This study includes one team (six members, different health professionals) within the same urology department. Results show that staff need information, such as guidelines and support throughout the improvement work to deliver high-quality care. Moreover, there is a need for evidence-based guidelines at national level to support improvement work. Healthcare staff need to pay attention to all team member needs to improve urological care. Organisational and managerial aspect are needed to support clear and common goals regarding healthcare improvement work. Urological improvement projects, generally, are lacking, which is why this study is important to improve nephrolithiasis patient care.

Study protocol: national research partnership to improve primary health care performance and outcomes for Indigenous peoples.

PubMed

Bailie, Ross; Si, Damin; Shannon, Cindy; Semmens, James; Rowley, Kevin; Scrimgeour, David J; Nagel, Tricia; Anderson, Ian; Connors, Christine; Weeramanthri, Tarun; Thompson, Sandra; McDermott, Robyn; Burke, Hugh; Moore, Elizabeth; Leon, Dallas; Weston, Richard; Grogan, Haylene; Stanley, Andrew; Gardner, Karen

2010-05-19

Strengthening primary health care is critical to reducing health inequity between Indigenous and non-Indigenous Australians. The Audit and Best practice for Chronic Disease Extension (ABCDE) project has facilitated the implementation of modern Continuous Quality Improvement (CQI) approaches in Indigenous community health care centres across Australia. The project demonstrated improvements in health centre systems, delivery of primary care services and in patient intermediate outcomes. It has also highlighted substantial variation in quality of care. Through a partnership between academic researchers, service providers and policy makers, we are now implementing a study which aims to 1) explore the factors associated with variation in clinical performance; 2) examine specific strategies that have been effective in improving primary care clinical performance; and 3) work with health service staff, management and policy makers to enhance the effective implementation of successful strategies. The study will be conducted in Indigenous community health centres from at least six States/Territories (Northern Territory, Western Australia, New South Wales, South Australia, Queensland and Victoria) over a five year period. A research hub will be established in each region to support collection and reporting of quantitative and qualitative clinical and health centre system performance data, to investigate factors affecting variation in quality of care and to facilitate effective translation of research evidence into policy and practice. The project is supported by a web-based information system, providing automated analysis and reporting of clinical care performance to health centre staff and management. By linking researchers directly to users of research (service providers, managers and policy makers), the partnership is well placed to generate new knowledge on effective strategies for improving the quality of primary health care and fostering effective and efficient exchange and use of data and information among service providers and policy makers to achieve evidence-based resource allocation, service planning, system development, and improvements of service delivery and Indigenous health outcomes.

Analysis of Minuteman Missile Crew Member Attitudes Toward Present Minuteman Education Program and Possible Alternatives.

DTIC Science & Technology

1980-06-01

TO0WARD PRESLT NUE N - DUCATION PROGRADF AND T0SMBLE 6. PERFORMING GIG. 0114:00RT NUMneRt 11. CONTRACT ORt GRANT NuUSERf(s1 t~ Donald L. i emp Captain...USAF, M4SC *Andrew T.//Rybacr Captain, USAF 9. PERFORMING ORGANIZATION NAME AND AOORES~r10 PROGRAM ELEMENT. PROJECT. TASK School of Systems and...106 38. MMEP IMPROVES DUTY PERFORMANCE (X2 One Sample Test) .. .......... . 107 39. MMEP IMPROVES DUTY PERFORMANCE (Questionnaire Data

Forensic examination of ink by high-performance thin layer chromatography--the United States Secret Service Digital Ink Library.

PubMed

Neumann, Cedric; Ramotowski, Robert; Genessay, Thibault

2011-05-13

Forensic examinations of ink have been performed since the beginning of the 20th century. Since the 1960s, the International Ink Library, maintained by the United States Secret Service, has supported those analyses. Until 2009, the search and identification of inks were essentially performed manually. This paper describes the results of a project designed to improve ink samples' analytical and search processes. The project focused on the development of improved standardization procedures to ensure the best possible reproducibility between analyses run on different HPTLC plates. The successful implementation of this new calibration method enabled the development of mathematical algorithms and of a software package to complement the existing ink library. Copyright © 2010 Elsevier B.V. All rights reserved.

Behind the fence forum theater: an arts performance partnership to address lupus and environmental justice.

PubMed

Williams, Edith Marie; Anderson, Judith; Lee, Rhonda; White, Janice; Hahn-Baker, David

2009-01-01

Community-based participatory research (CBPR) is a method to improve environmental quality in communities primarily inhabited by minorities or low-income families. The Buffalo Lupus Project was a CBPR partnership formed to explore the relationship between a local waste site and high rates of lupus. The "Behind the Fence" Community Environmental Forum Theater project was able to successfully funnel the results of scientific research and ongoing activities to the community by utilizing a Forum Theater approach, image-making techniques, an interactive workshop, and energetic public performance. Filming of project activities will expand the reach of that original performance and provide other communities with a potential model for similar efforts.

NASA high performance computing and communications program

NASA Technical Reports Server (NTRS)

Holcomb, Lee; Smith, Paul; Hunter, Paul

1993-01-01

The National Aeronautics and Space Administration's HPCC program is part of a new Presidential initiative aimed at producing a 1000-fold increase in supercomputing speed and a 100-fold improvement in available communications capability by 1997. As more advanced technologies are developed under the HPCC program, they will be used to solve NASA's 'Grand Challenge' problems, which include improving the design and simulation of advanced aerospace vehicles, allowing people at remote locations to communicate more effectively and share information, increasing scientist's abilities to model the Earth's climate and forecast global environmental trends, and improving the development of advanced spacecraft. NASA's HPCC program is organized into three projects which are unique to the agency's mission: the Computational Aerosciences (CAS) project, the Earth and Space Sciences (ESS) project, and the Remote Exploration and Experimentation (REE) project. An additional project, the Basic Research and Human Resources (BRHR) project exists to promote long term research in computer science and engineering and to increase the pool of trained personnel in a variety of scientific disciplines. This document presents an overview of the objectives and organization of these projects as well as summaries of individual research and development programs within each project.

Efficient Project Delivery Using Lean Principles - An Indian Case Study

NASA Astrophysics Data System (ADS)

Kovvuri, P. Ramachandra Reddy; Sawhney, Anil; Ahuja, Ritu; Sreekumar, Aiswarya

2016-03-01

Construction industry in India is growing at a rapid pace. Along with this growth, the industry is facing numerous challenges that are making delivery of projects inefficient. Experts believe that capacity constraints in the industry need to be addressed immediately. Government has recommended `introduction of efficient technologies and modern management techniques' to increase the productivity of the industry. In this context, lean principles can act as a lever to make project delivery more efficient and provide the much needed impetus to the Indian construction sector. Around the globe lean principles are showing positive results on the projects. Project teams are reporting improvements in construction time, cost and quality along with softer benefits of enhanced collaboration, coordination and trust in project teams. Can adoption of lean principles provide similar benefits in the Indian construction sector? This research was conducted to answer this question. Using an action research approach a key lean construction tool called Last Planner System (LPS) was tested on a large Indian construction project. The work described in this work investigates the improvements achieved in project delivery by adopting LPS in Indian construction sector. Comparison in pre- and post-implementation data demonstrates increase in the certainty of work-flow and improves schedule compliance. This is measured through a simple LPS metric called percent plan complete. Explicit improvements in schedule performance are seen during 8 week LPS implementation along with implicit improvements in coordination, collaboration and trust in the project team. This work reports the findings of LPS implementation on the case study project outlining the barriers and drivers to adoption, strategies needed to ensure successful implementation and roadmap for implementation. Based on the findings the authors envision that lean construction can make project delivery more efficient in India.

The Talent Development Middle School Model: Context, Components, and Initial Impacts on Students' Performance and Attendance

ERIC Educational Resources Information Center

Herlihy, Corinne M.; Kemple, James J.

2004-01-01

The Talent Development Middle School model was created to make a difference in struggling urban middle schools. The model is part of a trend in school improvement strategies whereby whole-school reform projects aim to improve performance and attendance outcomes for students through the use of major changes in both the organizational structure and…

DOE Office of Scientific and Technical Information (OSTI.GOV)

Qui, Songgang; Galbraith, Ross

This final report summarizes the final results of the Phase II Innovative Application of Maintenance-Free Phase-Change Thermal Energy Storage for Dish-Engine Solar Power Generation project being performed by Infinia Corporation for the U.S. Department of Energy under contract DE-FC36-08GO18157 during the project period of September 1, 2009 - August 30, 2012. The primary objective of this project is to demonstrate the practicality of integrating thermal energy storage (TES) modules, using a suitable thermal salt phase-change material (PCM) as its medium, with a dish/Stirling engine; enabling the system to operate during cloud transients and to provide dispatchable power for 4 tomore » 6 hours after sunset. A laboratory prototype designed to provide 3 kW-h of net electrical output was constructed and tested at Infinia's Ogden Headquarters. In the course of the testing, it was determined that the system's heat pipe network - used to transfer incoming heat from the solar receiver to both the Stirling generator heater head and to the phase change salt - did not perform to expectations. The heat pipes had limited capacity to deliver sufficient heat energy to the generator and salt mass while in a charging mode, which was highly dependent on the orientation of the device (vertical versus horizontal). In addition, the TES system was only able to extract about 30 to 40% of the expected amount of energy from the phase change salt once it was fully molten. However, the use of heat pipes to transfer heat energy to and from a thermal energy storage medium is a key technical innovation, and the project team feels that the limitations of the current device could be greatly improved with further development. A detailed study of manufacturing costs using the prototype TES module as a basis indicates that meeting DOE LCOE goals with this hardware requires significant efforts. Improvement can be made by implementing aggressive cost-down initiatives in design and materials, improving system performance by boosting efficiencies, and by refining cost estimates with vendor quotes in lieu of mass-based approaches. Although the prototype did not fully demonstrate performance and realize projected cost targets, the project team believes that these challenges can be overcome. The test data showed that the performance can be significantly improved by refining the heat pipe designs. However, the project objective for phase 3 is to design and test on sun the field ready systems, the project team feels that is necessary to further refine the prototype heat pipe design in the current prototype TES system before move on to field test units, Phase 3 continuation will not be pursued.« less

Writing Plays Using Creative Problem-Solving.

ERIC Educational Resources Information Center

Raiser, Lynne; Hinson, Shirley

1995-01-01

This article describes a project which involved inner city elementary grade children with disabilities in writing and performing their own plays. A four-step playwriting process focuses on theme and character development, problem finding, and writing dialogue. The project has led to improved reading skills, attention, memory skills,…

Module 3--School-Family-Community Connections. School Improvement Specialist Training Materials: Performance Standards, Improving Schools, and Literature Review

ERIC Educational Resources Information Center

Appalachia Educational Laboratory at Edvantia (NJ1), 2005

2005-01-01

The School Improvement Specialist Project prepared seven modules. School improvement specialists, as defined by the Appalachia Educational Laboratory at Edvantia, are change agents who work with schools to help them improve in the following areas so as to increase student achievement. These modules are intended to provide training materials for…

Development and Marketing of Low-Cost, High-Performance Steels for Infrastructure Applications

DOT National Transportation Integrated Search

2012-10-15

This project addressed the goal of National Strategy for Surface Transportation Research : to improve highway structures by enhanced materials, in particular by design and : implementation of new, drastically improved steels with respect to strength,...

Design and performance evaluation of a 20-aperture multipinhole collimator for myocardial perfusion imaging applications.

PubMed

Bowen, Jason D; Huang, Qiu; Ellin, Justin R; Lee, Tzu-Cheng; Shrestha, Uttam; Gullberg, Grant T; Seo, Youngho

2013-10-21

Single photon emission computed tomography (SPECT) myocardial perfusion imaging remains a critical tool in the diagnosis of coronary artery disease. However, after more than three decades of use, photon detection efficiency remains poor and unchanged. This is due to the continued reliance on parallel-hole collimators first introduced in 1964. These collimators possess poor geometric efficiency. Here we present the performance evaluation results of a newly designed multipinhole collimator with 20 pinhole apertures (PH20) for commercial SPECT systems. Computer simulations and numerical observer studies were used to assess the noise, bias and diagnostic imaging performance of a PH20 collimator in comparison with those of a low energy high resolution (LEHR) parallel-hole collimator. Ray-driven projector/backprojector pairs were used to model SPECT imaging acquisitions, including simulation of noiseless projection data and performing MLEM/OSEM image reconstructions. Poisson noise was added to noiseless projections for realistic projection data. Noise and bias performance were investigated for five mathematical cardiac and torso (MCAT) phantom anatomies imaged at two gantry orbit positions (19.5 and 25.0 cm). PH20 and LEHR images were reconstructed with 300 MLEM iterations and 30 OSEM iterations (ten subsets), respectively. Diagnostic imaging performance was assessed by a receiver operating characteristic (ROC) analysis performed on a single MCAT phantom; however, in this case PH20 images were reconstructed with 75 pixel-based OSEM iterations (four subsets). Four PH20 projection views from two positions of a dual-head camera acquisition and 60 LEHR projections were simulated for all studies. At uniformly-imposed resolution of 12.5 mm, significant improvements in SNR and diagnostic sensitivity (represented by the area under the ROC curve, or AUC) were realized when PH20 collimators are substituted for LEHR parallel-hole collimators. SNR improves by factors of 1.94-2.34 for the five patient anatomies and two orbital positions studied. For the ROC analysis the PH20 AUC is larger than the LEHR AUC with a p-value of 0.0067. Bias performance, however, decreases with the use of PH20 collimators. Systematic analyses showed PH20 collimators present improved diagnostic imaging performance over LEHR collimators, requiring only collimator exchange on existing SPECT cameras for their use.

Design and performance evaluation of a 20-aperture multipinhole collimator for myocardial perfusion imaging applications

NASA Astrophysics Data System (ADS)

Bowen, Jason D.; Huang, Qiu; Ellin, Justin R.; Lee, Tzu-Cheng; Shrestha, Uttam; Gullberg, Grant T.; Seo, Youngho

2013-10-01

Single photon emission computed tomography (SPECT) myocardial perfusion imaging remains a critical tool in the diagnosis of coronary artery disease. However, after more than three decades of use, photon detection efficiency remains poor and unchanged. This is due to the continued reliance on parallel-hole collimators first introduced in 1964. These collimators possess poor geometric efficiency. Here we present the performance evaluation results of a newly designed multipinhole collimator with 20 pinhole apertures (PH20) for commercial SPECT systems. Computer simulations and numerical observer studies were used to assess the noise, bias and diagnostic imaging performance of a PH20 collimator in comparison with those of a low energy high resolution (LEHR) parallel-hole collimator. Ray-driven projector/backprojector pairs were used to model SPECT imaging acquisitions, including simulation of noiseless projection data and performing MLEM/OSEM image reconstructions. Poisson noise was added to noiseless projections for realistic projection data. Noise and bias performance were investigated for five mathematical cardiac and torso (MCAT) phantom anatomies imaged at two gantry orbit positions (19.5 and 25.0 cm). PH20 and LEHR images were reconstructed with 300 MLEM iterations and 30 OSEM iterations (ten subsets), respectively. Diagnostic imaging performance was assessed by a receiver operating characteristic (ROC) analysis performed on a single MCAT phantom; however, in this case PH20 images were reconstructed with 75 pixel-based OSEM iterations (four subsets). Four PH20 projection views from two positions of a dual-head camera acquisition and 60 LEHR projections were simulated for all studies. At uniformly-imposed resolution of 12.5 mm, significant improvements in SNR and diagnostic sensitivity (represented by the area under the ROC curve, or AUC) were realized when PH20 collimators are substituted for LEHR parallel-hole collimators. SNR improves by factors of 1.94-2.34 for the five patient anatomies and two orbital positions studied. For the ROC analysis the PH20 AUC is larger than the LEHR AUC with a p-value of 0.0067. Bias performance, however, decreases with the use of PH20 collimators. Systematic analyses showed PH20 collimators present improved diagnostic imaging performance over LEHR collimators, requiring only collimator exchange on existing SPECT cameras for their use.

Multiscale Methods for Accurate, Efficient, and Scale-Aware Models of the Earth System

DOE Office of Scientific and Technical Information (OSTI.GOV)

Goldhaber, Steve; Holland, Marika

The major goal of this project was to contribute improvements to the infrastructure of an Earth System Model in order to support research in the Multiscale Methods for Accurate, Efficient, and Scale-Aware models of the Earth System project. In support of this, the NCAR team accomplished two main tasks: improving input/output performance of the model and improving atmospheric model simulation quality. Improvement of the performance and scalability of data input and diagnostic output within the model required a new infrastructure which can efficiently handle the unstructured grids common in multiscale simulations. This allows for a more computationally efficient model, enablingmore » more years of Earth System simulation. The quality of the model simulations was improved by reducing grid-point noise in the spectral element version of the Community Atmosphere Model (CAM-SE). This was achieved by running the physics of the model using grid-cell data on a finite-volume grid.« less

Evaluation of a novel waste heat recovery system for the cement industry using multi-criteria analysis (MCA) approach

NASA Astrophysics Data System (ADS)

Han, Yue; Guo, Junshan; Zheng, Wei; Ding, Junqi; Zhu, Lingkai; Che, Yongqiang; Zhang, Yanpeng

2017-12-01

Based on a novel waste heat recovery project established in a cement plant, this paper aims to evaluate the performance of the project using multi-criteria analysis (MCA) approach. Economic, environmental, social, and technical perspectives were concerned and analyzed. Different sustainability criteria and indicators related with the project were evaluated through ranking/rating process and pairwise comparison. Results have shown similar outcomes, that ten out of eleven criteria are favorable at a high standard, which reveals the project’s success. Although the project has performed so well in economic, environmental and technical terms, social aspects have some weak points, and measures should be taken to improve social benefit.

An exploratory analysis of the model for understanding success in quality.

PubMed

Kaplan, Heather C; Froehle, Craig M; Cassedy, Amy; Provost, Lloyd P; Margolis, Peter A

2013-01-01

Experience suggests that differences in context produce variability in the effectiveness of quality improvement (QI) interventions. However, little is known about which contextual factors affect success or how they exert influence. Using the Model for Understanding Success in Quality (MUSIQ), we perform exploratory quantitative tests of the role of context in QI success. We used a cross-sectional design to survey individuals participating in QI projects in three settings: a pediatric hospital, hospitals affiliated with a state QI collaborative, and organizations sponsoring participants in an improvement advisor training program. Individuals participating in QI projects completed a questionnaire assessing contextual factors included in MUSIQ and measures of perceived success. Path analysis was used to test the direct, indirect, and total effects of context variables on QI success as hypothesized in MUSIQ. In the 74 projects studied, most contextual factors in MUSIQ were found to be significantly related to at least one QI project performance outcome. Contextual factors exhibiting significant effects on two measures of perceived QI success included resource availability, QI team leadership, team QI skills, microsystem motivation, microsystem QI culture, and microsystem QI capability. There was weaker evidence for effects of senior leader project sponsors, organizational QI culture, QI team decision-making, and microsystem QI leadership. These initial tests add to the validity of MUSIQ as a tool for identifying which contextual factors affect improvement success and understanding how they exert influence. Using MUSIQ, managers and QI practitioners can begin to identify aspects of context that must be addressed before or during the execution of QI projects and plan strategies to modify context for increased success. Additional work by QI researchers to improve the theory, refine measurement approaches, and validate MUSIQ as a predictive tool in a wider range of QI efforts is necessary.

Improved performance of JPCP overlays.

DOT National Transportation Integrated Search

2013-07-01

The overall performance of Michigan concrete overlays has been good. However, some recent JPCP overlay projects have developed premature distress with signs of pumping. It is suspected that lack of drainage was the main cause for the distresses rangi...

Exterior LED Lighting Projects at Princeton University

DOE Office of Scientific and Technical Information (OSTI.GOV)

Davis, Robert G.; Evans, William; Murphy, Arthur T.

For this report, PNNL / the U.S. Department of Energy (DOE) studied a series of past exterior lighting projects at Princeton, in order to document Princeton’s experiences with solid-state lighting (SSL) and the lessons learned along the way, and to show how their approach to SSL projects evolved as their own learning expanded and as the products available improved in performance and sophistication.

Vegetation projections for Wind Cave National Park with three future climate scenarios: Final report in completion of Task Agreement J8W07100052

USGS Publications Warehouse

King, David A.; Bachelet, Dominique M.; Symstad, Amy J.

2013-01-01

Since the initial application of MC1 to a small portion of WICA (Bachelet et al. 2000), the model has been altered to improve model performance with the inclusion of dynamic fire. Applying this improved version to WICA required substantial recalibration, during which we have made a number of improvements to MC1 that will be incorporated as permanent changes. In this report we document these changes and our calibration procedure following a brief overview of the model. We compare the projections of current vegetation to the current state of the park and present projections of vegetation dynamics under future climates downscaled from three GCMs selected to represent the existing range in available GCM projections. In doing so, we examine the consequences of different management options regarding fire and grazing, major aspects of biotic management at Wind Cave.

Digital electronic engine control history

NASA Technical Reports Server (NTRS)

Putnam, T. W.

1984-01-01

Full authority digital electronic engine controls (DEECs) were studied, developed, and ground tested because of projected benefits in operability, improved performance, reduced maintenance, improved reliability, and lower life cycle costs. The issues of operability and improved performance, however, are assessed in a flight test program. The DEEC on a F100 engine in an F-15 aircraft was demonstrated and evaluated. The events leading to the flight test program are chronicled and important management and technical results are identified.

Promoting gender parity in basic education: Lessons from a technical cooperation project in Yemen

NASA Astrophysics Data System (ADS)

Yuki, Takako; Mizuno, Keiko; Ogawa, Keiichi; Mihoko, Sakai

2013-06-01

Many girls are not sent to school in Yemen, despite basic education being free as well as compulsory for all children aged 6-15. Aiming to improve girls' enrolment by increasing parental and community involvement, the Japan International Cooperation Agency (JICA) offered a technical cooperation project in June 2005 called Broadening Regional Initiative for Developing Girls' Education (BRIDGE). Phase 1 of this project ran for three and a half years, piloting a participatory school management model supported by school grants in six districts of the Taiz Governorate in the Southwest of Yemen. To find out how successful this approach has been in a traditional society, the authors of this paper analysed the gender parity index (GPI) of the project's pilot schools. Based on data collected at three points in time (in the initial and final years of the project, and two years after the project's end), their findings suggest that interventions in school management which strongly emphasise girls' education can be effective in improving gender parity rather quickly, regardless of the schools' initial conditions. However, the authors also observe that the pilot schools' post-project performance in terms of gender parity is mixed. While the local government allocated budgets for school grants to all pilot schools even after the project's end, training and monitoring activities were cut back. The authors further observe that the variation in performance appears to be significantly correlated with school leaders' initial perceptions of gender equality and with the number of female teachers employed. These findings point to the importance of providing schools with continuous long-term guidance and of monitoring those which implement school improvement programmes.

Redesigning the care of fragility fracture patients to improve osteoporosis management: a health care improvement project.

PubMed

Harrington, J Timothy; Barash, Harvey L; Day, Sherry; Lease, Joellen

2005-04-15

To develop new processes that assure more reliable, population-based care of fragility fracture patients. A 4-year clinical improvement project was performed in a multispecialty, community practice health system using evidence-based guidelines and rapid cycle process improvement methods (plan-do-study-act cycles). Prior to this project, appropriate osteoporosis care was provided to only 5% of our 1999 hip fracture patients. In 2001, primary physicians were provided prompts about appropriate care (cycle 1), which resulted in improved care for only 20% of patients. A process improvement pilot in 2002 (cycle 2) and full program implementation in 2003 (cycle 3) have assured osteoporosis care for all willing and able patients with any fragility fracture. Altogether, 58% of 2003 fragility fracture patients, including 46% of those with hip fracture, have had a bone measurement, have been assigned to osteoporosis care with their primary physician or a consultant, and are being monitored regularly. Only 19% refused osteoporosis care. Key process improvements have included using orthopedic billings to identify patients, referring patients directly from orthopedics to an osteoporosis care program, organizing care with a nurse manager and process management computer software, assigning patients to primary or consultative physician care based on disease severity, and monitoring adherence to therapy by telephone. Reliable osteoporosis care is achievable by redesigning clinical processes. Performance data motivate physicians to reconsider traditional approaches. Improving the care of osteoporosis and other chronic diseases requires coordinated care across specialty boundaries and health system support.

Realizing Improvement through Team Empowerment (RITE): A Team-based, Project-based Multidisciplinary Improvement Program.

PubMed

Larson, David B; Mickelsen, L Jake; Garcia, Kandice

2016-01-01

Performance improvement in a complex health care environment depends on the cooperation of diverse individuals and groups, allocation of time and resources, and use of effective improvement methods. To address this challenge, we developed an 18-week multidisciplinary training program that would also provide a vehicle for effecting needed improvements, by using a team- and project-based model. The program began in the radiology department and subsequently expanded to include projects from throughout the medical center. Participants were taught a specific method for team-based problem solving, which included (a) articulating the problem, (b) observing the process, (c) analyzing possible causes of problems, (d) identifying key drivers, (e) testing and refining interventions, and (f) providing for sustainment of results. Progress was formally reviewed on a weekly basis. A total of 14 teams consisting of 78 participants completed the course in two cohorts; one project was discontinued. All completed projects resulted in at least modest improvement. Mean skill scores increased from 2.5/6 to 4.5/6 (P < .01), and the mean satisfaction score was 4.7/5. Identified keys to success include (a) engagement of frontline staff, (b) teams given authority to make process changes, (c) capable improvement coaches, (d) a physician-director with improvement expertise and organizational authority, (e) capable administrative direction, (f) supportive organizational leaders, (g) weekly progress reviews, (h) timely educational material, (i) structured problem-solving methods, and ( j ) multiple projects working simultaneously. The purpose of this article is to review the program, including the methods and results, and discuss perceived keys to program success. © RSNA, 2016.

Aircraft photovoltaic power-generating system

NASA Astrophysics Data System (ADS)

Doellner, Oscar Leonard

Photovoltaic cells, appropriately cooled and operating in the combustion-created high radiant-intensity environment of gas-turbine and jet engines, may replace the conventional (gearbox-driven) electrical power generators aboard jet aircraft. This study projects significant improvements not only in aircraft electrical power-generating-system performance, but also in overall aircraft performance. Jet-engine design modifications incorporating this concept not only save weight (and thus fuel), but are - in themselves - favorable to jet-engine performance. The dissertation concentrates on operational, constructional, structural, thermal, optical, radiometrical, thin-film, and solid-state theoretical aspects of the overall project.

Data compression for full motion video transmission

NASA Technical Reports Server (NTRS)

Whyte, Wayne A., Jr.; Sayood, Khalid

1991-01-01

Clearly transmission of visual information will be a major, if not dominant, factor in determining the requirements for, and assessing the performance of the Space Exploration Initiative (SEI) communications systems. Projected image/video requirements which are currently anticipated for SEI mission scenarios are presented. Based on this information and projected link performance figures, the image/video data compression requirements which would allow link closure are identified. Finally several approaches which could satisfy some of the compression requirements are presented and possible future approaches which show promise for more substantial compression performance improvement are discussed.

Sorbent Structural Impacts Due to Humidity on Carbon Dioxide Removal Sorbents for Advanced Exploration Systems

NASA Technical Reports Server (NTRS)

Watson, David; Knox, James C.; West, Phillip; Stanley, Christine M.; Bush, Richard

2015-01-01

The Life Support Systems Project (LSSP) under the Advanced Exploration Systems (AES) program builds upon the work performed under the AES Atmosphere Resource Recovery and Environmental Monitoring (ARREM) project focusing on the numerous technology development areas. The CO2 removal and associated air drying development efforts are focused on improving the current state-of-the-art system on the International Space Station (ISS) utilizing fixed beds of sorbent pellets by seeking more robust pelletized sorbents, evaluating structured sorbents, and examining alternate bed configurations to improve system efficiency and reliability. A component of the CO2 removal effort encompasses structural stability testing of existing and emerging sorbents. Testing will be performed on dry sorbents and sorbents that have been conditioned to three humidity levels. This paper describes the sorbent structural stability screening efforts in support of the LSS Project within the AES Program.

Design Concepts for Cooled Ceramic Matrix Composite Turbine Vanes

NASA Technical Reports Server (NTRS)

Boyle, Robert

2014-01-01

This project demonstrated that higher temperature capabilities of ceramic matrix composites (CMCs) can be used to reduce emissions and improve fuel consumption in gas turbine engines. The work involved closely coupling aerothermal and structural analyses for the first-stage vane of a high-pressure turbine (HPT). These vanes are actively cooled, typically using film cooling. Ceramic materials have structural and thermal properties different from conventional metals used for the first-stage HPT vane. This project identified vane configurations that satisfy CMC structural strength and life constraints while maintaining vane aerodynamic efficiency and reducing vane cooling to improve engine performance and reduce emissions. The project examined modifications to vane internal configurations to achieve the desired objectives. Thermal and pressure stresses are equally important, and both were analyzed using an ANSYS® structural analysis. Three-dimensional fluid and heat transfer analyses were used to determine vane aerodynamic performance and heat load distributions.

Institutional Computing: Final Report Quantum Effects on Cosmology: Probing Physics Beyond the Standard Model with Big Bang Nucleosynthesis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Paris, Mark W.

The current one-year project allocation (w17 burst) supports the continuation of research performed in the two-year Institutional Computing allocation (w14 bigbangnucleosynthesis). The project has supported development and production runs resulting in several publications[1, 2, 3, 4] in peer-review journals and talks. Most signi cantly, we have recently achieved a signi cant improvement in code performance. This improvement was essential to the prospect of making further progress on this heretofore unsolved multiphysics problem that lies at the intersection of nuclear and particle theory and the kinetic theory of energy transport in a system with internal (quantum) degrees of freedom.

ERNIE performance with TSA portals Initial Results

DOE Office of Scientific and Technical Information (OSTI.GOV)

Labov, S.

This project extends the “Enhanced Radiological Nuclear Inspection and Evaluation” (ERNIE) system developed with CBP and DNDO to improve performance of PVT-based Radiation Portal Monitors (RPMs). ERNIE was designed to be used with any RPM system. The first implementation was with the SAIC (Leidos) RPM-8 systems. In this project, we are demonstrating how effective the ERNIE approach can be when applied to the VM250 TSA portals used in NSDD programs. Part of the challenge in adapting ERNIE to handle VM250 portals is the lack of gamma spectral information. We report here on the first results showing how the ERNIE analysismore » can improve analysis of measurements with the VM250 RPMs.« less

Case Study of Using High Performance Commercial Processors in Space

NASA Technical Reports Server (NTRS)

Ferguson, Roscoe C.; Olivas, Zulema

2009-01-01

The purpose of the Space Shuttle Cockpit Avionics Upgrade project (1999 2004) was to reduce crew workload and improve situational awareness. The upgrade was to augment the Shuttle avionics system with new hardware and software. A major success of this project was the validation of the hardware architecture and software design. This was significant because the project incorporated new technology and approaches for the development of human rated space software. An early version of this system was tested at the Johnson Space Center for one month by teams of astronauts. The results were positive, but NASA eventually cancelled the project towards the end of the development cycle. The goal to reduce crew workload and improve situational awareness resulted in the need for high performance Central Processing Units (CPUs). The choice of CPU selected was the PowerPC family, which is a reduced instruction set computer (RISC) known for its high performance. However, the requirement for radiation tolerance resulted in the re-evaluation of the selected family member of the PowerPC line. Radiation testing revealed that the original selected processor (PowerPC 7400) was too soft to meet mission objectives and an effort was established to perform trade studies and performance testing to determine a feasible candidate. At that time, the PowerPC RAD750s were radiation tolerant, but did not meet the required performance needs of the project. Thus, the final solution was to select the PowerPC 7455. This processor did not have a radiation tolerant version, but had some ability to detect failures. However, its cache tags did not provide parity and thus the project incorporated a software strategy to detect radiation failures. The strategy was to incorporate dual paths for software generating commands to the legacy Space Shuttle avionics to prevent failures due to the softness of the upgraded avionics.

Case Study of Using High Performance Commercial Processors in a Space Environment

NASA Technical Reports Server (NTRS)

Ferguson, Roscoe C.; Olivas, Zulema

2009-01-01

The purpose of the Space Shuttle Cockpit Avionics Upgrade project was to reduce crew workload and improve situational awareness. The upgrade was to augment the Shuttle avionics system with new hardware and software. A major success of this project was the validation of the hardware architecture and software design. This was significant because the project incorporated new technology and approaches for the development of human rated space software. An early version of this system was tested at the Johnson Space Center for one month by teams of astronauts. The results were positive, but NASA eventually cancelled the project towards the end of the development cycle. The goal to reduce crew workload and improve situational awareness resulted in the need for high performance Central Processing Units (CPUs). The choice of CPU selected was the PowerPC family, which is a reduced instruction set computer (RISC) known for its high performance. However, the requirement for radiation tolerance resulted in the reevaluation of the selected family member of the PowerPC line. Radiation testing revealed that the original selected processor (PowerPC 7400) was too soft to meet mission objectives and an effort was established to perform trade studies and performance testing to determine a feasible candidate. At that time, the PowerPC RAD750s where radiation tolerant, but did not meet the required performance needs of the project. Thus, the final solution was to select the PowerPC 7455. This processor did not have a radiation tolerant version, but faired better than the 7400 in the ability to detect failures. However, its cache tags did not provide parity and thus the project incorporated a software strategy to detect radiation failures. The strategy was to incorporate dual paths for software generating commands to the legacy Space Shuttle avionics to prevent failures due to the softness of the upgraded avionics.

Improving flow in the OR.

PubMed

Blouin-Delisle, Charles Hubert; Drolet, Renee; Gagnon, Serge; Turcotte, Stephane; Boutet, Sylvie; Coulombe, Martin; Daneau, Eric

2018-03-12

Purpose The purpose of this paper is to increase efficiency in ORs without affecting quality of care by improving the workflow processes. Administrative processes independent of the surgical act can be challenging and may lead to clinical impacts such as increasing delays. The authors hypothesized that a Lean project could improve efficiency of surgical processes by reducing the length of stays in the recovery ward. Design/methodology/approach Two similar Lean projects were performed in the surgery departments of two hospitals of the Centre Hospitalier Universitaire de Québec: Hôtel Dieu de Quebec (HDQ) and Hôpital de l'Enfant Jesus (HEJ). The HDQ project designed around a Define, Measure, Analyse, Improve and Control process revision and a Kaizen workshop focused on patients who were hospitalized in a specific care unit after surgery and the HEJ project targeted patients in a post-operative ambulatory context. The recovery ward output delay was measured retrospectively before and after project. Findings For the HDQ Lean project, wasted time in the recovery ward was reduced by 62 minutes (68 percent reduction) between the two groups. The authors also observed an increase of about 25 percent of all admissions made in the daytime after the project compared to the time period before the project. For the HEJ Lean project, time passed in the recovery ward was reduced by 6 min (29 percent reduction). Originality/value These projects produced an improvement in the flow of the OR without targeting clinical practices in the OR itself. They demonstrated that change in administrative processes can have a great impact on the flow of clinical pathways and highlight the need for comprehensive and precise monitoring of every step of the elective surgery patient trajectory.

Extreme-Scale Computing Project Aims to Advance Precision Oncology | Poster

Cancer.gov

Two government agencies and five national laboratories are collaborating to develop extremely high-performance computing capabilities that will analyze mountains of research and clinical data to improve scientific understanding of cancer, predict drug response, and improve treatments for patients.

Students Apply Research Methods to Consumer Decisions About Cognitive Enhancing Drinks

PubMed Central

Walters, Charles B.; Hill, Katherine G.; Zavilla, Anastasia R.; Erickson, Cynthia A.

2014-01-01

The goal of this class project was to provide students with a hands-on research experience that allowed autonomy, but eliminated duplication of effort and could be completed within one semester. Our resources were limited to a small supply budget and an introductory psychology subject pool. Six students from a behavioral neuroscience class tested claims made by a drink company that their product improves cognitive function. The students each chose a cognitive task for their part of the project. The tasks included the Donders Reaction Time Task, the Stroop Task, the Raven’s Progressive Matrices, a short-term memory span test, the Rey-Osterrieth Complex Figure Test and a simple measure of prefrontal EEG activity. Participants were randomly assigned to an experimental or control drink. The experimental group received the putative cognitive enhancing drink and the control group received a placebo drink that was very similar in color and taste. The two drinks shared no active ingredients. Results suggest that the putative cognitive enhancing drink did not improve performance on any of the tasks and decreased performance on the short-term memory task. These findings are discussed in regard to implications for consumers as well as further research into supplements and their ability to improve cognitive performance. Each student presented his/her results at a university-wide research conference. This project provided a rich experience in which students had the opportunity to carry out a research project from conception to presentation. PMID:25565916

Biochemical Platform Processing Integration

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

The objective of this project is to facilitate deployment of enzyme-based biomass conversion technology. The immediate goal is to explore integration issues that impact process performance and to demonstrate improved performance of the lower-cost enzymes being developed by Genencor and Novozymes.

Sensorimotor Adaptability Training Improves Motor and Dual-Task Performance

NASA Technical Reports Server (NTRS)

Bloomberg, J.J.; Peters, B.T.; Mulavara, A.P.; Brady, R.; Batson, C.; Cohen, H.S.

2009-01-01

The overall objective of our project is to develop a sensorimotor adaptability (SA) training program designed to facilitate recovery of functional capabilities when astronauts transition to different gravitational environments. The goal of our current study was to determine if SA training using variation in visual flow and support surface motion produces improved performance in a novel sensory environment and demonstrate the retention characteristics of SA training.

Wind and Solar Data Projections from the U.S. Energy Information Administration: Past Performance and Planned Enhancements

EIA Publications

2016-01-01

In an effort to improve EIA's approach to providing accurate, comprehensive data, and useful projections for policy analysis, EIA has conducted a review of its historical data and projections of capacity, generation, and cost projections for wind and solar technologies. While EIA's internal processes and engagement with stakeholders are both continuing, this paper shares some early findings of EIA's current review of our wind and solar data and projections, focusing in part on some of the issues that have been publicly raised by EIA's critics.

Benchmarking facilities providing care: An international overview of initiatives

PubMed Central

Thonon, Frédérique; Watson, Jonathan; Saghatchian, Mahasti

2015-01-01

We performed a literature review of existing benchmarking projects of health facilities to explore (1) the rationales for those projects, (2) the motivation for health facilities to participate, (3) the indicators used and (4) the success and threat factors linked to those projects. We studied both peer-reviewed and grey literature. We examined 23 benchmarking projects of different medical specialities. The majority of projects used a mix of structure, process and outcome indicators. For some projects, participants had a direct or indirect financial incentive to participate (such as reimbursement by Medicaid/Medicare or litigation costs related to quality of care). A positive impact was reported for most projects, mainly in terms of improvement of practice and adoption of guidelines and, to a lesser extent, improvement in communication. Only 1 project reported positive impact in terms of clinical outcomes. Success factors and threats are linked to both the benchmarking process (such as organisation of meetings, link with existing projects) and indicators used (such as adjustment for diagnostic-related groups). The results of this review will help coordinators of a benchmarking project to set it up successfully. PMID:26770800

Cascade Distiller System Performance Testing Interim Results

NASA Technical Reports Server (NTRS)

Callahan, Michael R.; Pensinger, Stuart; Sargusingh, Miriam J.

2014-01-01

The Cascade Distillation System (CDS) is a rotary distillation system with potential for greater reliability and lower energy costs than existing distillation systems. Based upon the results of the 2009 distillation comparison test (DCT) and recommendations of the expert panel, the Advanced Exploration Systems (AES) Water Recovery Project (WRP) project advanced the technology by increasing reliability of the system through redesign of bearing assemblies and improved rotor dynamics. In addition, the project improved the CDS power efficiency by optimizing the thermoelectric heat pump (TeHP) and heat exchanger design. Testing at the NASA-JSC Advanced Exploration System Water Laboratory (AES Water Lab) using a prototype Cascade Distillation Subsystem (CDS) wastewater processor (Honeywell d International, Torrance, Calif.) with test support equipment and control system developed by Johnson Space Center was performed to evaluate performance of the system with the upgrades as compared to previous system performance. The system was challenged with Solution 1 from the NASA Exploration Life Support (ELS) distillation comparison testing performed in 2009. Solution 1 consisted of a mixed stream containing human-generated urine and humidity condensate. A secondary objective of this testing is to evaluate the performance of the CDS as compared to the state of the art Distillation Assembly (DA) used in the ISS Urine Processor Assembly (UPA). This was done by challenging the system with ISS analog waste streams. This paper details the results of the AES WRP CDS performance testing.

Improved Classroom Performance by Reinforcement Outside the Classroom.

ERIC Educational Resources Information Center

McIntire, Roger; And Others

Each day, percentage scores on classroom and homework papers determined assignment of fifth and sixth grade students (N=53) into three groups. Children who were above 90 percent or had 10 percent improvement were given access to all activities in a project room. Children with less than 10 percent improvement were given limited access to…

Maintenance of Certification: How Performance in Practice Changes Improve Tobacco Cessation in Addiction Psychiatrists’ Practice

PubMed Central

Ford, James H.; Oliver, Karen A.; Giles, Miriam; Cates-Wessel, Kathryn; Krahn, Dean; Levin, Frances R.

2017-01-01

Background and Objectives In 2000, the American Board of Medical Specialties implemented the Maintenance of Certification (MOC), a structured process to help physicians identify and implement a quality improvement project to improve patient care. This study reports on findings from an MOC Performance in Practice (PIP) module designed and evaluated by addiction psychiatrists who are members of the American Academy of Addiction Psychiatry (AAAP). Method A 3-phase process was utilized to recruit AAAP members to participate in the study. The current study utilized data from 154 self-selected AAAP members who evaluated the effectiveness of the MOC Tobacco Cessation PIP. Results Of the physicians participating, 76% (n 120) completed the Tobacco PIP. A paired t-test analysis revealed that reported changes in clinical measure documentation were significant across all six measures. Targeted improvement efforts focused on a single clinical measure. Results found that simple change projects designed to improve clinical practice led to substantial changes in self-reported chart documentation for the selected measure. Conclusions The current findings suggest that addiction psychiatrists can leverage the MOC process to improve clinical care. PMID:27973746

Case studies for GSHP demonstration projects in the US

DOE PAGES

Liu, Xiaobing; Malhotra, Mini; Im, Piljae

2015-07-01

Under the American Recovery and Reinvestment Act , twenty-six ground source heat pump (GSHP) projects were competitively selected and carried out to demonstrate the benefits of GSHP systems and innovative technologies for cost reduction and/or performance improvement. This article gives an overview of the case studies for six of the systems. These case studies evaluated efficiencies, energy savings, and costs of the demonstrated systems. In addition, it was found that more energy savings could be achieved if controls of GSHP system are improved.

Healthcare quality measurement in orthopaedic surgery: current state of the art.

PubMed

Auerbach, Andrew

2009-10-01

Improving quality of care in arthroplasty is of increasing importance to payors, hospitals, surgeons, and patients. Efforts to compel improvement have traditionally focused measurement and reporting of data describing structural factors, care processes (or 'quality measures'), and clinical outcomes. Reporting structural measures (eg, surgical case volume) has been used with varying degrees of success. Care process measures, exemplified by initiatives such as the Surgical Care Improvement Project measures, are chosen based on the strength of randomized trial evidence linking the process to improved outcomes. However, evidence linking improved performance on Surgical Care Improvement Project measures with improved outcomes is limited. Outcome measures in surgery are of increasing importance as an approach to compel care improvement with prominent examples represented by the National Surgical Quality Improvement Project. Although outcomes-focused approaches are often costly, when linked to active benchmarking and collaborative activities, they may improve care broadly. Moreover, implementation of computerized data systems collecting information formerly collected on paper only will facilitate benchmarking. In the end, care will only be improved if these data are used to define methods for innovating care systems that deliver better outcomes at lower or equivalent costs.

Demonstration of Advanced CO 2 Capture Process Improvements for Coal-Fired Flue Gas

DOE Office of Scientific and Technical Information (OSTI.GOV)

Carroll, John

This document summarizes the activities of Cooperative Agreement DE-FE0026590, “Demonstration of Advanced CO 2 Capture Process Improvements for Coal-Fired Flue Gas” during the performance period of October 1, 2015 through May 31, 2017. This project was funded by the U.S. Department of Energy (DOE) National Energy Technology Laboratory (NETL). Southern Company Services, Inc. (SCS) was the prime contractor and co-funder of the project. Mitsubishi Heavy Industries America (MHIA) and AECOM were project team members. The overall project objective was to improve costs, energy requirements, and performance of an existing amine-based CO 2 capture process. This will occur via improvements inmore » three areas: 1. Reboiler design – The first objective of the program was to demonstrate performance of an integrated stripper/reboiler (termed Built-in Reboiler, or BIR) to reduce footprint, capital costs, and integration issues of the current technology. 2. Particulate management – The second objective was to carry out a Particulate Matter Management (PMM) test. This has the potential to reduce operating costs and capital costs due to the reduced or eliminated need for mechanical filtration. 3. Solvent – The third objective was to carry out a new solvent test plan (referred to as NSL) to demonstrate a new solvent (termed New Solvent A), which is expected to reduce regeneration steam. The bulk price is also expected to be lower than KS-1, which is the current solvent used in this process. NSL testing would include baseline testing, optimization, long term testing, solvent reclamation testing, and final inspection. These combine to form the Advanced Carbon Capture (ACC) technology. Much of this work will be applicable to generic solvent processes, especially in regards to improved reboiler design, and focused to meet or exceed the DOE’s overall carbon capture performance goals of 90% CO 2 capture rate with 95% CO 2 purity at a cost of $40/tonne of CO 2 by 2025 and at a cost of electricity (COE) 30% less than baseline CO 2 capture approaches by 2030. This project was divided into two phases. Phase 1 is the planning phase, and Phase 2 is the construction, operations, testing, and analysis phase. A down select occurred after Phase 1. Phase 1 activities were carried out during this reporting period, and therefore, Phase 1 activities are solely considered in this report. The project was not selected for Phase 2 funding.« less

Minnesota's Nursing Facility Performance-Based Incentive Payment Program: An Innovative Model for Promoting Care Quality

ERIC Educational Resources Information Center

Cooke, Valerie; Arling, Greg; Lewis, Teresa; Abrahamson, Kathleen A.; Mueller, Christine; Edstrom, Lisa

2010-01-01

Purpose: Minnesota's Nursing Facility Performance-Based Incentive Payment Program (PIPP) supports provider-initiated projects aimed at improving care quality and efficiency. PIPP moves beyond conventional pay for performance. It seeks to promote implementation of evidence-based practices, encourage innovation and risk taking, foster collaboration…

Instituting systems-based practice and practice-based learning and improvement: a curriculum of inquiry.

PubMed

Wilper, Andrew P; Smith, Curtis Scott; Weppner, William

2013-09-16

The Accreditation Council for Graduate Medical Education (ACGME) requires that training programs integrate system-based practice (SBP) and practice-based learning and improvement (PBLI) into internal medicine residency curricula. CONTEXT AND SETTING: We instituted a seminar series and year-long-mentored curriculum designed to engage internal medicine residents in these competencies. Residents participate in a seminar series that includes assigned reading and structured discussion with faculty who assist in the development of quality improvement or research projects. Residents pursue projects over the remainder of the year. Monthly works in progress meetings, protected time for inquiry, and continued faculty mentorship guide the residents in their project development. Trainees present their work at hospital-wide grand rounds at the end of the academic year. We performed a survey of residents to assess their self-reported knowledge, attitudes and skills in SBP and PBLI. In addition, blinded faculty scored projects for appropriateness, impact, and feasibility. We measured resident self-reported knowledge, attitudes, and skills at the end of the academic year. We found evidence that participants improved their understanding of the context in which they were practicing, and that their ability to engage in quality improvement projects increased. Blinded faculty reviewers favorably ranked the projects' feasibility, impact, and appropriateness. The 'Curriculum of Inquiry' generated 11 quality improvement and research projects during the study period. Barriers to the ongoing work include a limited supply of mentors and delays due to Institutional Review Board approval. Hospital leadership recognizes the importance of the curriculum, and our accreditation manager now cites our ongoing work. A structured residency-based curriculum facilitates resident demonstration of SBP and practice-based learning and improvement. Residents gain knowledge and skills though this enterprise and hospitals gain access to trainees who help to solve ongoing problems and meet accreditation requirements.

Improving the energy density of hydraulic hybrid vehicles (HHVS) and evaluating plug-in HHVS.

DOT National Transportation Integrated Search

2010-10-01

This report describes analyses performed by researchers at The University of Toledo (UT) in : collaboration with researchers at the University of Detroit Mercy (UDM) on the project : Improving the Energy Density of Hydraulic Hybrid Vehicles (HHVs)...

14 CFR 1260.12 - Choice of award instrument.

Code of Federal Regulations, 2012 CFR

2012-01-01

... for the accomplishment of a scheduled NASA mission or project. (3) If it is determined that a... and exploit the potential of scientific discoveries or improvements in technology, materials... improving student performance in science, mathematics, technology, or related fields; (ii) Enhancing the...

Development of low-cost technology for the next generation of high efficiency solar cells composed of earth abundant elements

DOE Office of Scientific and Technical Information (OSTI.GOV)

Agrawal, Rakesh

2014-09-28

The development of renewable, affordable, and environmentally conscious means of generating energy on a global scale represents a grand challenge of our time. Due to the “permanence” of radiation from the sun, solar energy promises to remain a viable and sustainable power source far into the future. Established single-junction photovoltaic technologies achieve high power conversion efficiencies (pce) near 20% but require complicated manufacturing processes that prohibit the marriage of large-scale throughput (e.g. on the GW scale), profitability, and quality control. Our approach to this problem begins with the synthesis of nanocrystals of semiconductor materials comprising earth abundant elements and characterizedmore » by material and optoelectronic properties ideal for photovoltaic applications, namely Cu2ZnSn(S,Se)4 (CZTSSe). Once synthesized, such nanocrystals are formulated into an ink, coated onto substrates, and processed into completed solar cells in such a way that enables scale-up to high throughput, roll-to-roll manufacturing processes. This project aimed to address the major limitation to CZTSSe solar cell pce’s – the low open-circuit voltage (Voc) reported throughout literature for devices comprised of this material. Throughout the project significant advancements have been made in fundamental understanding of the CZTSSe material and device limitations associated with this material system. Additionally, notable improvements have been made to our nanocrystal based processing technique to alleviate performance limitations due to the identified device limitations. Notably, (1) significant improvements have been made in reducing intra- and inter-nanoparticle heterogeneity, (2) improvements in device performance have been realized with novel cation substitution in Ge-alloyed CZTGeSSe absorbers, (3) systematic analysis of absorber sintering has been conducted to optimize the selenization process for large grain CZTSSe absorbers, (4) novel electrical characterization analysis techniques have been developed to identify significant limitations to traditional electrical characterization of CZTSSe devices, and (5) the developed electrical analysis techniques have been used to identify the role that band gap and electrostatic potential fluctuations have in limiting device performance for this material system. The device modeling and characterization of CZTSSe undertaken with this project have significant implications for the CZTSSe research community, as the identified limitations due to potential fluctuations are expected to be a performance limitation to high-efficiency CZTSSe devices fabricated from all current processing techniques. Additionally, improvements realized through enhanced absorber processing conditions to minimize nanoparticle and large-grain absorber heterogeneity are suggested to be beneficial processing improvements which should be applied to CZTSSe devices fabricated from all processing techniques. Ultimately, our research has indicated that improved performance for CZTSSe will be achieved through novel absorber processing which minimizes defect formation, elemental losses, secondary phase formation, and compositional uniformity in CZTSSe absorbers; we believe this novel absorber processing can be achieved through nanocrystal based processing of CZTSSe which is an active area of research at the conclusion of this award. While significant fundamental understanding of CZTSSe and the performance limitations associated with this material system, as well as notable improvements in the processing of nanocrystal based CZTSSe absorbers, have been achieved under this project, the limitation of two years of research funding towards our goals prevents further significant advancements directly identified through pce. improvements relative to those reported herein. As the characterization and modeling subtask of this project has been the main driving force for understanding device limitations, the conclusions of this analysis have just recently been applied to the processing of nanocrystal based CZTSSe absorbers -- with notable success. We expect the notable fundamental understanding of device limitations and absorber sintering achieved under this project will lead to significant improvements in device performance for CZTSSe devices in the near future for devices fabricated from a variety of processing techniques« less

Projecting future expansion of invasive species: comparing and improving methodologies for species distribution modeling.

PubMed

Mainali, Kumar P; Warren, Dan L; Dhileepan, Kunjithapatham; McConnachie, Andrew; Strathie, Lorraine; Hassan, Gul; Karki, Debendra; Shrestha, Bharat B; Parmesan, Camille

2015-12-01

Modeling the distributions of species, especially of invasive species in non-native ranges, involves multiple challenges. Here, we developed some novel approaches to species distribution modeling aimed at reducing the influences of such challenges and improving the realism of projections. We estimated species-environment relationships for Parthenium hysterophorus L. (Asteraceae) with four modeling methods run with multiple scenarios of (i) sources of occurrences and geographically isolated background ranges for absences, (ii) approaches to drawing background (absence) points, and (iii) alternate sets of predictor variables. We further tested various quantitative metrics of model evaluation against biological insight. Model projections were very sensitive to the choice of training dataset. Model accuracy was much improved using a global dataset for model training, rather than restricting data input to the species' native range. AUC score was a poor metric for model evaluation and, if used alone, was not a useful criterion for assessing model performance. Projections away from the sampled space (i.e., into areas of potential future invasion) were very different depending on the modeling methods used, raising questions about the reliability of ensemble projections. Generalized linear models gave very unrealistic projections far away from the training region. Models that efficiently fit the dominant pattern, but exclude highly local patterns in the dataset and capture interactions as they appear in data (e.g., boosted regression trees), improved generalization of the models. Biological knowledge of the species and its distribution was important in refining choices about the best set of projections. A post hoc test conducted on a new Parthenium dataset from Nepal validated excellent predictive performance of our 'best' model. We showed that vast stretches of currently uninvaded geographic areas on multiple continents harbor highly suitable habitats for parthenium. However, discrepancies between model predictions and parthenium invasion in Australia indicate successful management for this globally significant weed. © 2015 John Wiley & Sons Ltd.

Status of Air Quality in Central California and Needs for Further Study

NASA Astrophysics Data System (ADS)

Tanrikulu, S.; Beaver, S.; Soong, S.; Tran, C.; Jia, Y.; Matsuoka, J.; McNider, R. T.; Biazar, A. P.; Palazoglu, A.; Lee, P.; Wang, J.; Kang, D.; Aneja, V. P.

2012-12-01

Ozone and PM2.5 levels frequently exceed NAAQS in central California (CC). Additional emission reductions are needed to attain and maintain the standards there. Agencies are developing cost-effective emission control strategies along with complementary incentive programs to reduce emissions when exceedances are forecasted. These approaches require accurate modeling and forecasting capabilities. A variety of models have been rigorously applied (MM5, WRF, CMAQ, CAMx) over CC. Despite the vast amount of land-based measurements from special field programs and significant effort, models have historically exhibited marginal performance. Satellite data may improve model performance by: establishing IC/BC over outlying areas of the modeling domain having unknown conditions; enabling FDDA over the Pacific Ocean to characterize important marine inflows and pollutant outflows; and filling in the gaps of the land-based monitoring network. BAAQMD, in collaboration with the NASA AQAST, plans to conduct four studies that include satellite-based data in CC air quality analysis and modeling: The first project enhances and refines weather patterns, especially aloft, impacting summer ozone formation. Surface analyses were unable to characterize the strong attenuating effect of the complex terrain to steer marine winds impinging on the continent. The dense summer clouds and fog over the Pacific Ocean form spatial patterns that can be related to the downstream air flows through polluted areas. The goal of this project is to explore, characterize, and quantify these relationships using cloud cover data. Specifically, cloud agreement statistics will be developed using satellite data and model clouds. Model skin temperature predictions will be compared to both MODIS and GOES skin temperatures. The second project evaluates and improves the initial and simulated fields of meteorological models that provide inputs to air quality models. The study will attempt to determine whether a cloud dynamical adjustment developed by UAHuntsville can improve model performance for maritime stratus and whether a moisture adjustment scheme in the Pleim-Xiu boundary layer scheme can use satellite data in place of coarse surface air temperature measurements. The goal is to improve meteorological model performance that leads to improved air quality model performance. The third project evaluates and improves forecasting skills of the National Air Quality Forecasting Model in CC by using land-based routine measurements as well as satellite data. Local forecasts are mostly based on surface meteorological and air quality measurements and weather charts provided by NWS. The goal is to improve the average accuracy in forecasting exceedances, which is around 60%. The fourth project uses satellite data for monitoring trends in fine particulate matter (PM2.5) in the San Francisco Bay Area. It evaluates the effectiveness of a rule adopted in 2008 that restricts household wood burning on days forecasted to have high PM2.5 levels. The goal is to complement current analyses based on surface data covering the largest sub-regions and population centers. The overall goal is to use satellite data to overcome limitations of land-based measurements. The outcomes will be further conceptual understanding of pollutant formation, improved regulatory model performance, and better optimized forecasting programs.

Exploring the effect of at-risk case management compensation on hospital pay-for-performance outcomes: tools for change.

PubMed

Granata, Randy L; Hamilton, Karen

2015-01-01

Acute care nurse case managers are charged with compliance oversight, managing throughput, and ensuring safe care transitions. Leveraging the roles of nurse case managers and social workers during care transitions translates into improved fiscal performance under the Affordable Care Act. This article aims to equip leaders in the field of case management with tools to facilitate the alignment of case management systems with hospital pay-for-performance measures. A quality improvement project was implemented at a hospital in south Alabama to examine the question: for acute care case managers, what is the effect of key performance indictors using an at-risk compensation model in comparison to past nonincentive models on hospital readmissions, lengths of stay, and patient satisfaction surrounding the discharge process. Inpatient acute care hospital. The implementation of an at-risk compensation model using key performance indicators, Lean Six Sigma methodology, and Creative Health Care Management's Relationship-Based Care framework demonstrated reduced length of stay, hospital readmissions, and improved patient experiences. Regulatory changes and new models of reimbursement in the acute care environment have created the perfect storm for case management leaders. Hospital fiscal performance is dependent on effective case management processes and the ability to optimize scarce resources. The quality improvement project aimed to further align case management systems and structures with hospital pay-for-performance measures. Tools for change were presented to assist leaders with the change acceleration process.

Federal and tribal lands road safety audits : case studies

DOT National Transportation Integrated Search

2009-12-01

A road safety audit (RSA) is a formal safety performance examination by an independent, multidisciplinary team. RSAs are an effective tool for proactively improving the safety performance of a road project during the planning and design stages, and f...

Report: EPA Needs to Clarify Its Claim of “No Net Loss” of Wetlands

EPA Pesticide Factsheets

Report #14-P-0191, April 16, 2014. The EPA can improve performance reports by indicating that achieving “no net loss” is based on the assumption that all mitigation projects will meet performance standards.

The effects of higher strength and associated concrete properties on pavement performance

DOT National Transportation Integrated Search

2001-06-01

The major goal of this project was to develop recommendations for PCC properties and materials characteristics found in : higher strength JPCPs with improved long-term performance as determined by joint spalling and faulting, and transverse : slab...

Development of performance properties of ternary mixtures : laboratory study on concrete.

DOT National Transportation Integrated Search

2011-03-01

This research project is a comprehensive study of how supplementary cementitious materials (SCMs) can be used to : improve the performance of concrete mixtures. This report summarizes the findings of the Laboratory Study on Concrete : phase of this w...

The effects of higher strength and associated concrete properties on pavement performance.

DOT National Transportation Integrated Search

2001-06-01

The major goal of this project was to develop recommendations for PCC properties and materials characteristics found : in higher strength JPCP's with improved long-term performance as determined by joint spalling and faulting, and : transverse slab c...

[Company Wide Quality Control (total quality): methodological principles and intervention techniques for step-by-step improvement].

PubMed

Corbara, F; Di Cristofaro, E

1996-01-01

The concept of Quality is particularly up to date and not a new one for the Journal. The need for better Quality is a must also in Medical care. Quality doesn't mean additional costs and excessive burden for the co-workers. On the contrary, initial costs can be compensated for through a more rational utilisation of the resources. The consequent better service for the patient results in an ameliorated working environment, with high profits. Fundamental requirements for reaching concrete results are: 1) the convinced involvement in the idea of all levels (division, service, laboratory) in order to have the different groups act in synergism towards common goals; 2) the knowledge of appropriate methods. The Authors examine this last point with a deep analysis of the techniques involved in Company Wide Quality Control (C.W.Q.C.) or Total Quality. The improving process has to the continuous and proceed in small steps, each time being constituted by 4 different phases, represented by the PDCA cycle, or Demining wheel, where: P = PLAN, which means plan before acting; D = DO, perform what has been planned; C = CHECK, verify the results; A = ACT, standardize if the results are positive, repeat the process if negative. Each process of improvement implies a prior precise definition of a project, i.e. a problem whose solution has been planned. The project must always presume: a specific subject--a goal--one or more people to reach it--a limited time to work it out. The most effective way to ameliorate Quality is performing projects. Step by Step amelioration is synonymous of performance of many projects. A brilliant way to produce many projects remains their "industrialization", which can be reached by means of 6 basic criteria: 1) full involvement of the Direction; 2) potential co-working in the projects of all employees; 3) employment of simple instruments; 4) respect of a few procedural formalities; 5) rewarding of personnel; 6) continuous promotion of the concepts of quality and ongoing improvement. The Authors describe for each of the previous criteria approaching methods and best operative techniques, according C.W.Q.C.

Plausible role for CHW peer support groups in increasing care-seeking in an integrated community case management project in Rwanda: a mixed methods evaluation

PubMed Central

Langston, Anne; Weiss, Jennifer; Landegger, Justine; Pullum, Thomas; Morrow, Melanie; Kabadege, Melene; Mugeni, Catherine; Sarriot, Eric

2014-01-01

ABSTRACT Background: The Kabeho Mwana project (2006–2011) supported the Rwanda Ministry of Health (MOH) in scaling up integrated community case management (iCCM) of childhood illness in 6 of Rwanda's 30 districts. The project trained and equipped community health workers (CHWs) according to national guidelines. In project districts, Kabeho Mwana staff also trained CHWs to conduct household-level health promotion and established supervision and reporting mechanisms through CHW peer support groups (PSGs) and quality improvement systems. Methods: The 2005 and 2010 Demographic and Health Surveys were re-analyzed to evaluate how project and non-project districts differed in terms of care-seeking for fever, diarrhea, and acute respiratory infection symptoms and related indicators. We developed a logit regression model, controlling for the timing of the first CHW training, with the district included as a fixed categorical effect. We also analyzed qualitative data from the final evaluation to examine factors that may have contributed to improved outcomes. Results: While there was notable improvement in care-seeking across all districts, care-seeking from any provider for each of the 3 conditions, and for all 3 combined, increased significantly more in the project districts. CHWs contributed a larger percentage of consultations in project districts (27%) than in non-project districts (12%). Qualitative data suggested that the PSG model was a valuable sub-level of CHW organization associated with improved CHW performance, supervision, and social capital. Conclusions: The iCCM model implemented by Kabeho Mwana resulted in greater improvements in care-seeking than those seen in the rest of the country. Intensive monitoring, collaborative supervision, community mobilization, and CHW PSGs contributed to this success. The PSGs were a unique contribution of the project, playing a critical role in improving care-seeking in project districts. Effective implementation of iCCM should therefore include CHW management and social support mechanisms. Finally, re-analysis of national survey data improved evaluation findings by providing impact estimates. PMID:25276593

NASA High Performance Computing and Communications program

NASA Technical Reports Server (NTRS)

Holcomb, Lee; Smith, Paul; Hunter, Paul

1994-01-01

The National Aeronautics and Space Administration's HPCC program is part of a new Presidential initiative aimed at producing a 1000-fold increase in supercomputing speed and a 1(X)-fold improvement in available communications capability by 1997. As more advanced technologies are developed under the HPCC program, they will be used to solve NASA's 'Grand Challenge' problems, which include improving the design and simulation of advanced aerospace vehicles, allowing people at remote locations to communicate more effectively and share information, increasing scientists' abilities to model the Earth's climate and forecast global environmental trends, and improving the development of advanced spacecraft. NASA's HPCC program is organized into three projects which are unique to the agency's mission: the Computational Aerosciences (CAS) project, the Earth and Space Sciences (ESS) project, and the Remote Exploration and Experimentation (REE) project. An additional project, the Basic Research and Human Resources (BRHR) project, exists to promote long term research in computer science and engineering and to increase the pool of trained personnel in a variety of scientific disciplines. This document presents an overview of the objectives and organization of these projects, as well as summaries of early accomplishments and the significance, status, and plans for individual research and development programs within each project. Areas of emphasis include benchmarking, testbeds, software and simulation methods.

Making Mathematics Matter: Professional Development Improving Outcomes in High-Poverty Environments

ERIC Educational Resources Information Center

Siebers, Carolyn A.

2012-01-01

This research study is a mixed-methods quantitative and qualitative study that analyzed data from an intensive, long-term professional development project named, "Project: Making Mathematics Matter. (PM[superscript 3])" carried out in two low-performing, high-poverty districts. Two of the districts served as treatment districts and ALL…

Using School Change States to Analyze Comprehensive School Reform Projects

ERIC Educational Resources Information Center

Wetherill, Karen S.; Applefield, James M.

2005-01-01

Comprehensive school reform (CSR) projects are being funded throughout the United States in a determined effort to improve the performance of public education. The multidimensional nature of comprehensive school reform presents unique challenges for explaining widely discrepant outcomes among schools. These challenges are addressed in a study of 8…

The MDE Diploma: First International Postgraduate Specialization in Model-Driven Engineering

ERIC Educational Resources Information Center

Cabot, Jordi; Tisi, Massimo

2011-01-01

Model-Driven Engineering (MDE) is changing the way we build, operate, and maintain our software-intensive systems. Several projects using MDE practices are reporting significant improvements in quality and performance but, to be able to handle these projects, software engineers need a set of technical and interpersonal skills that are currently…

The Study of Project-Based Learning in Preservice Teachers

ERIC Educational Resources Information Center

Anderson, Ashley Ann

2016-01-01

Project-based learning (PBL) is a teaching approach where students engage in the investigation of real-world problems through their inquiries. Studies found considerable support for PBL on student performance and improvement in grades K-12 and at the collegiate level. However, fewer studies have examined the effects of PBL at the collegiate level…

Impact Evaluation of National Writing Project Professional Development Program

ERIC Educational Resources Information Center

Gallagher, H. Alix; Woodworth, Katrina; McCaffrey, Teresa; Park, Christina J.; Wang, Haiwen

2014-01-01

Improving teacher effectiveness is a key strategy to ensure student readiness for college and careers and to address achievement gaps and persistent low performance. In response to the new Common Core State Standards for English Language Arts (CCSS-ELA) the National Writing Project (NWP) created a professional development (PD) program to support…

Setting Whole-Building Absolute Energy Use Targets for the K-12 School, Retail, and Healthcare Sectors: Preprint

DOE Office of Scientific and Technical Information (OSTI.GOV)

Leach, M.; Bonnema, E.; Pless, S.

2012-08-01

This paper helps owners' efficiency representatives to inform executive management, contract development, and project management staff as to how specifying and applying whole-building absolute energy use targets for new construction or renovation projects can improve the operational energy performance of commercial buildings.

Army Corps of Engineers: Cost Increases in Flood Control Projects and Improving Communication with Nonfederal Sponsors

DTIC Science & Technology

2013-12-01

such poor condition that it had to have major rehabilitation work performed. Work to fix the deteriorated tunnel cost $10 million more than had...originally been estimated.19 Corps officials on the Little Calumet project said during construction they encountered a former landfill along one portion

Designing Reading Instruction for Cultural Minorities: The Case of the Kamehameha Early Education Program.

ERIC Educational Resources Information Center

Calfee, Robert C.; And Others

This is a report on the Kamehameha Early Education Program (KEEP), a research and development project designed to find ways of improving the school performance of educationally disadvantaged Hawaiian children. The project, implemented in a laboratory school setting and continuously monitored, is described as a reading instruction program for…

49 CFR 260.23 - Form and content of application generally.

Code of Federal Regulations, 2011 CFR

2011-10-01

... analyses and studies that have been performed to determine present and future demand for rail services or... with improved service; (2) Description of the impact of the project upon the projected freight or passenger traffic to be originated, terminated, or carried by the Applicant for at least the five years...

Sampling limits for electron tomography with sparsity-exploiting reconstructions.

PubMed

Jiang, Yi; Padgett, Elliot; Hovden, Robert; Muller, David A

2018-03-01

Electron tomography (ET) has become a standard technique for 3D characterization of materials at the nano-scale. Traditional reconstruction algorithms such as weighted back projection suffer from disruptive artifacts with insufficient projections. Popularized by compressed sensing, sparsity-exploiting algorithms have been applied to experimental ET data and show promise for improving reconstruction quality or reducing the total beam dose applied to a specimen. Nevertheless, theoretical bounds for these methods have been less explored in the context of ET applications. Here, we perform numerical simulations to investigate performance of ℓ 1 -norm and total-variation (TV) minimization under various imaging conditions. From 36,100 different simulated structures, our results show specimens with more complex structures generally require more projections for exact reconstruction. However, once sufficient data is acquired, dividing the beam dose over more projections provides no improvements-analogous to the traditional dose-fraction theorem. Moreover, a limited tilt range of ±75° or less can result in distorting artifacts in sparsity-exploiting reconstructions. The influence of optimization parameters on reconstructions is also discussed. Copyright © 2017 Elsevier B.V. All rights reserved.

Converging Redundant Sensor Network Information for Improved Building Control

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dale Tiller; D. Phil; Gregor Henze

2007-09-30

This project investigated the development and application of sensor networks to enhance building energy management and security. Commercial, industrial and residential buildings often incorporate systems used to determine occupancy, but current sensor technology and control algorithms limit the effectiveness of these systems. For example, most of these systems rely on single monitoring points to detect occupancy, when more than one monitoring point could improve system performance. Phase I of the project focused on instrumentation and data collection. During the initial project phase, a new occupancy detection system was developed, commissioned and installed in a sample of private offices and open-planmore » office workstations. Data acquisition systems were developed and deployed to collect data on space occupancy profiles. Phase II of the project demonstrated that a network of several sensors provides a more accurate measure of occupancy than is possible using systems based on single monitoring points. This phase also established that analysis algorithms could be applied to the sensor network data stream to improve the accuracy of system performance in energy management and security applications. In Phase III of the project, the sensor network from Phase I was complemented by a control strategy developed based on the results from the first two project phases: this controller was implemented in a small sample of work areas, and applied to lighting control. Two additional technologies were developed in the course of completing the project. A prototype web-based display that portrays the current status of each detector in a sensor network monitoring building occupancy was designed and implemented. A new capability that enables occupancy sensors in a sensor network to dynamically set the 'time delay' interval based on ongoing occupant behavior in the space was also designed and implemented.« less

How Teachers Can Assess Kindergarten Children's Motor Performance in Hong Kong.

ERIC Educational Resources Information Center

Lam, Mei Yung; Ip, Man Hing; Lui, Ping Keung; Koong, May Kay

2003-01-01

This project developed a motor performance instrument for a motor performance award scheme for kindergartners to be used by the Hong Kong Childhealth Foundation. Findings indicated that boys outperformed girls on agility and throwing. Girls performed better than boys on static balance. A marked improvement in agility was noted at age 5.5 years,…

Improving the availability of clinical history accompanying radiographic examinations in a large pediatric radiology department.

PubMed

Hawkins, C Matthew; Anton, Christopher G; Bankes, Wendy M; Leach, Alan D; Zeno, Michael J; Pryor, Rebecca M; Larson, David B

2014-04-01

The purpose of this quality improvement initiative was to improve the consistency with which radiologists are provided a complete clinical history when interpreting radiography examinations performed in the outpatient and emergency department settings. The clinical history was considered complete if it contained three elements: nature of the symptoms, description of injury, or cause for clinical concern; duration of symptoms or time of injury; and focal site of pain or abnormality, if applicable. This was reduced to three elements: "what-when-where." A goal was established that 95% of the clinical histories should contain all three elements. To achieve this goal, technologists supplemented referring clinicians' history. The project was divided into four phases: launch, support, transition to sustainability, and maintenance. During the support phase, results of automated weekly audits automatically populated group-level performance reports. During the transition to the sustainability phase, audit results populated individual-level performance reports. During the maintenance phase, quarterly audit results were incorporated into technologists' employee performance goals. Before initiation of the project, 38% (76/200) of radiography examinations were accompanied by a complete clinical history. This increased to 92% (928/1006) by the end of the 15-week improvement phase. Performance was sustained at 96% (1168/1213) 7 months later [corrected]. By clearly defining expectations for an appropriate clinical history and establishing system and organizational mechanisms to facilitate verifiable compliance, we were able to successfully and sustainably improve the consistency with which radiography examinations were accompanied by a complete clinical history.

A Novel Approach to Practice-Based Learning and Improvement Using a Web-Based Audit and Feedback Module.

PubMed

Boggan, Joel C; Cheely, George; Shah, Bimal R; Heffelfinger, Randy; Springall, Deanna; Thomas, Samantha M; Zaas, Aimee; Bae, Jonathan

2014-09-01

Systematically engaging residents in large programs in quality improvement (QI) is challenging. To coordinate a shared QI project in a large residency program using an online tool. A web-based QI tool guided residents through a 2-phase evaluation of performance of foot examinations in patients with diabetes. In phase 1, residents completed reviews of health records with online data entry. Residents were then presented with personal performance data relative to peers and were prompted to develop improvement plans. In phase 2, residents again reviewed personal performance. Rates of performance were compared at the program and clinic levels for each phase, with data presented for residents. Acceptability was measured by the number of residents completing each phase. Feasibility was measured by estimated faculty, programmer, and administrator time and costs. Seventy-nine of 86 eligible residents (92%) completed improvement plans and reviewed 1471 patients in phase 1, whereas 68 residents (79%) reviewed 1054 patient charts in phase 2. Rates of performance of examination increased significantly between phases (from 52% to 73% for complete examination, P < .001). Development of the tool required 130 hours of programmer time. Project analysis and management required 6 hours of administrator and faculty time monthly. An online tool developed and implemented for program-wide QI initiatives successfully engaged residents to participate in QI activities. Residents using this tool demonstrated improvement in a selected quality target. This tool could be adapted by other graduate medical education programs or for faculty development.

High-bandwidth and flexible tracking control for precision motion with application to a piezo nanopositioner.

PubMed

Feng, Zhao; Ling, Jie; Ming, Min; Xiao, Xiao-Hui

2017-08-01

For precision motion, high-bandwidth and flexible tracking are the two important issues for significant performance improvement. Iterative learning control (ILC) is an effective feedforward control method only for systems that operate strictly repetitively. Although projection ILC can track varying references, the performance is still limited by the fixed-bandwidth Q-filter, especially for triangular waves tracking commonly used in a piezo nanopositioner. In this paper, a wavelet transform-based linear time-varying (LTV) Q-filter design for projection ILC is proposed to compensate high-frequency errors and improve the ability to tracking varying references simultaneously. The LVT Q-filter is designed based on the modulus maximum of wavelet detail coefficients calculated by wavelet transform to determine the high-frequency locations of each iteration with the advantages of avoiding cross-terms and segmenting manually. The proposed approach was verified on a piezo nanopositioner. Experimental results indicate that the proposed approach can locate the high-frequency regions accurately and achieve the best performance under varying references compared with traditional frequency-domain and projection ILC with a fixed-bandwidth Q-filter, which validates that through implementing the LTV filter on projection ILC, high-bandwidth and flexible tracking can be achieved simultaneously by the proposed approach.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lower, Mark D; Christopher, Timothy W; Oland, C Barry

The Facilities and Operations (F&O) Directorate is sponsoring a continuous process improvement (CPI) program. Its purpose is to stimulate, promote, and sustain a culture of improvement throughout all levels of the organization. The CPI program ensures that a scientific and repeatable process exists for improving the delivery of F&O products and services in support of Oak Ridge National Laboratory (ORNL) Management Systems. Strategic objectives of the CPI program include achieving excellence in laboratory operations in the areas of safety, health, and the environment. Identifying and promoting opportunities for achieving the following critical outcomes are important business goals of the CPImore » program: improved safety performance; process focused on consumer needs; modern and secure campus; flexibility to respond to changing laboratory needs; bench strength for the future; and elimination of legacy issues. The Steam Pressure-Reducing Station (SPRS) Safety and Energy Efficiency Improvement Project, which is under the CPI program, focuses on maintaining and upgrading SPRSs that are part of the ORNL steam distribution network. This steam pipe network transports steam produced at the ORNL steam plant to many buildings in the main campus site. The SPRS Safety and Energy Efficiency Improvement Project promotes excellence in laboratory operations by (1) improving personnel safety, (2) decreasing fuel consumption through improved steam system energy efficiency, and (3) achieving compliance with applicable worker health and safety requirements. The SPRS Safety and Energy Efficiency Improvement Project being performed by F&O is helping ORNL improve both energy efficiency and worker safety by modifying, maintaining, and repairing SPRSs. Since work began in 2006, numerous energy-wasting steam leaks have been eliminated, heat losses from uninsulated steam pipe surfaces have been reduced, and deficient pressure retaining components have been replaced. These improvements helped ORNL reduce its overall utility costs by decreasing the amount of fuel used to generate steam. Reduced fuel consumption also decreased air emissions. These improvements also helped lower the risk of burn injuries to workers and helped prevent shrapnel injuries resulting from missiles produced by pressurized component failures. In most cases, the economic benefit and cost effectiveness of the SPRS Safety and Energy Efficiency Improvement Project is reflected in payback periods of 1 year or less.« less

75 FR 41793 - Submission for OMB Review; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2010-07-19

... agencies for cooperative projects in marketing service and in marketing research to effectuate the purposes... encourage research and innovation aimed at improving the efficiency and performance of the U.S. marketing.... Agricultural Marketing Service Title: Federal-State Marketing Improvement Program (FSMIP). OMB Control Number...

Using Maslow's pyramid and the national database of nursing quality indicators(R) to attain a healthier work environment.

PubMed

Groff-Paris, Lisa; Terhaar, Mary

2010-12-07

The strongest predictor of nurse job dissatisfaction and intent to leave is that of stress in the practice environment. Good communication, control over practice, decision making at the bedside, teamwork, and nurse empowerment have been found to increase nurse satisfaction and decrease turnover. In this article we share our experience of developing a rapid-design process to change the approach to performance improvement so as to increase engagement, empowerment, effectiveness, and the quality of the professional practice environment. Meal and non-meal breaks were identified as the target area for improvement. Qualitative and quantitative data support the success of this project. We begin this article with a review of literature related to work environment and retention and a presentation of the frameworks used to improve the work environment, specifically Maslow's theory of the Hierarchy of Inborn Needs and the National Database of Nursing Quality Indicators Survey. We then describe our performance improvement project and share our conclusion and recommendations.

Developing tools to measure quality in congenital catheterization and interventions: the congenital cardiac catheterization project on outcomes (C3PO).

PubMed

Chaudhry-Waterman, Nadia; Coombs, Sandra; Porras, Diego; Holzer, Ralf; Bergersen, Lisa

2014-01-01

The broad range of relatively rare procedures performed in pediatric cardiac catheterization laboratories has made the standardization of care and risk assessment in the field statistically quite problematic. However, with the growing number of patients who undergo cardiac catheterization, it has become imperative that the cardiology community overcomes these challenges to study patient outcomes. The Congenital Cardiac Catheterization Project on Outcomes was able to develop benchmarks, tools for measurement, and risk adjustment methods while exploring procedural efficacy. Based on the success of these efforts, the collaborative is pursuing a follow-up project, the Congenital Cardiac Catheterization Project on Outcomes-Quality Improvement, aimed at improving the outcomes for all patients undergoing catheterization for congenital heart disease by reducing radiation exposure.

Quality initiatives: planning, setting up, and carrying out radiology process improvement projects.

PubMed

Tamm, Eric P; Szklaruk, Janio; Puthooran, Leejo; Stone, Danna; Stevens, Brian L; Modaro, Cathy

2012-01-01

In the coming decades, those who provide radiologic imaging services will be increasingly challenged by the economic, demographic, and political forces affecting healthcare to improve their efficiency, enhance the value of their services, and achieve greater customer satisfaction. It is essential that radiologists master and consistently apply basic process improvement skills that have allowed professionals in many other fields to thrive in a competitive environment. The authors provide a step-by-step overview of process improvement from the perspective of a radiologic imaging practice by describing their experience in conducting a process improvement project: to increase the daily volume of body magnetic resonance imaging examinations performed at their institution. The first step in any process improvement project is to identify and prioritize opportunities for improvement in the work process. Next, an effective project team must be formed that includes representatives of all participants in the process. An achievable aim must be formulated, appropriate measures selected, and baseline data collected to determine the effects of subsequent efforts to achieve the aim. Each aspect of the process in question is then analyzed by using appropriate tools (eg, flowcharts, fishbone diagrams, Pareto diagrams) to identify opportunities for beneficial change. Plans for change are then established and implemented with regular measurements and review followed by necessary adjustments in course. These so-called PDSA (planning, doing, studying, and acting) cycles are repeated until the aim is achieved or modified and the project closed.

Change of the layout of an office of a metallurgical company: simple projects, big solutions.

PubMed

Duarte, Luiz Carlos da Silva; Eckhardt, Moacir; da Motta, Giordano Paulo

2012-01-01

The posture, a good organization and the proper layout of the environment and workplaces have a positive influence on the income of an employee. To develop the work it is used a methodology that addressed the study phases of the theory involving the subject, description of the current situation, preparation of conceptions, choice of design, implementation and reporting of results. Through the project of "Change of the layout of an office of a metallurgical company" there was an intervention in these reported aspects providing improvements in the office, regarding ergonomic, layout, workplace and lighting issues, bringing welfare to the official, with the intent to improve its performance within the company and facilitating its actions, as the company's customer service. The results provided improvements in layout, in the workplace and especially in comfort for the human resources that perform their activities.

Sustainability in the AAP Bronchiolitis Quality Improvement Project.

PubMed

Shadman, Kristin A; Ralston, Shawn L; Garber, Matthew D; Eickhoff, Jens; Mussman, Grant M; Walley, Susan C; Rice-Conboy, Elizabeth; Coller, Ryan J

2017-11-01

Adherence to American Academy of Pediatrics (AAP) bronchiolitis clinical practice guideline recommendations improved significantly through the AAP's multiinstitutional collaborative, the Bronchiolitis Quality Improvement Project (BQIP). We assessed sustainability of improvements at participating institutions for 1 year following completion of the collaborative. Twenty-one multidisciplinary hospital-based teams provided monthly data for key inpatient bronchiolitis measures during baseline and intervention bronchiolitis seasons. Nine sites provided data in the season following completion of the collaborative. Encounters included children younger than 24 months who were hospitalized for bronchiolitis without comorbid chronic illness, prematurity, or intensive care. Changes between baseline-, intervention-, and sustainability-season data were assessed using generalized linear mixed-effects models with site-specific random effects. Differences between hospital characteristics, baseline performance, and initial improvement between sites that did and did not participate in the sustainability season were compared. A total of 2275 discharges were reviewed, comprising 995 baseline, 877 intervention, and 403 sustainability- season encounters. Improvements in all key bronchiolitis quality measures achieved during the intervention season were maintained during the sustainability season, and orders for intermittent pulse oximetry increased from 40.6% (95% confidence interval [CI], 22.8-61.1) to 79.2% (95% CI, 58.0- 91.3). Sites that did and did not participate in the sustainability season had similar characteristics. BQIP participating sites maintained improvements in key bronchiolitis quality measures for 1 year following the project's completion. This approach, which provided an evidence-based best-practice toolkit while building the quality-improvement capacity of local interdisciplinary teams, may support performance gains that persist beyond the active phase of the collaborative. © 2017 Society of Hospital Medicine

Oncology nurses and the experience of participation in an evidence-based practice project.

PubMed

Fridman, Mary; Frederickson, Keville

2014-07-01

To illuminate the experiences of oncology nurses who participated in an evidence-based practice (EBP) project in an institution with an EBP organizational structure. A descriptive phenomenologic approach and in-depth interviews with each participant. An oncology-focused academic medical center with an established organizational infrastructure for EBP. 12 RNs working in an oncology setting who participated in an EBP project. Descriptive, qualitative phenomenologic approach through use of interviews and analysis of interview text. Four essential themes (i.e., support, challenges, evolution, and empowerment) and 11 subthemes emerged that reflected nurses' professional and personal growth, as well as the creation of a culture of EBP in the workplace. The participants described the EBP project as a positive, empowering personal and professional evolutionary experience with supports and challenges that resulted in improvements in patient care. To the authors' knowledge, the current study is the first qualitative study to demonstrate improved nursing outcomes (e.g., professional growth, improved nursing performance) and nurses' perception of improved patient outcomes (e.g., ongoing healthcare collaboration, evidence-based changes in practice).

UAS in the NAS Project: Large-Scale Communication Architecture Simulations with NASA GRC Gen5 Radio Model

NASA Technical Reports Server (NTRS)

Kubat, Gregory

2016-01-01

This report provides a description and performance characterization of the large-scale, Relay architecture, UAS communications simulation capability developed for the NASA GRC, UAS in the NAS Project. The system uses a validated model of the GRC Gen5 CNPC, Flight-Test Radio model. Contained in the report is a description of the simulation system and its model components, recent changes made to the system to improve performance, descriptions and objectives of sample simulations used for test and verification, and a sampling and observations of results and performance data.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Solar-Lezama, Armando

The goal of the project was to develop a programming model that would significantly improve productivity in the high-performance computing domain by bringing together three components: a) Automated equivalence checking, b) Sketch-based program synthesis, and c) Autotuning. The report provides an executive summary of the research accomplished through this project. At the end of the report is appended a paper that describes in more detail the key technical accomplishments from this project, and which was published in SC 2014.

Group cognitive behavioral therapy to improve the quality of care to opioid-treated patients with chronic noncancer pain: a practice improvement project.

PubMed

Whitten, Stacey K; Stanik-Hutt, Julie

2013-07-01

To enhance outcomes of patients with chronic noncancer pain (CNCP) treated with opioids in a primary care setting by implementing an evidence-based quality improvement project. The project consisted of the implementation of a 6-week cognitive behavioral therapy (CBT) program. Twenty-two patients with CNCP completed the program. Impact of the project was evaluated by comparing pre- and postintervention participant self-reports of mood on the Beck Depression Inventory and functional status on the Brief Pain Inventory and Short Form-36. Patient perception of treatment benefit was also measured using the Patient Global Impression of Change. Qualitative provider perceptions of the program were also collected. Paired t-test statistics were used to analyze the data. Mood (including negative attitude, performance difficulty, and physical complaints), and patient impression of treatment benefit improved significantly after CBT was added. Primary care providers reported that the CBT supported their overall management of these complex patients. The addition of a CBT program improved selected outcomes in this self-selected sample of patients with CNCP treated with opioids. ©2012 The Author(s) ©2012 American Association of Nurse Practitioners.

Improving Motor and Drive System Performance – A Sourcebook for Industry

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

This sourcebook outlines opportunities to improve motor and drive systems performance. The sourcebook is divided into four main sections: (1) Motor and Drive System Basics: Summarizes important terms, relationships, and system design considerations relating to motor and drive systems. (2) Performance Opportunity Road Map: Details the key components of well-functioning motor and drive systems and opportunities for energy performance opportunities. (3) Motor System Economics: Offers recommendations on how to propose improvement projects based on corporate priorities, efficiency gains, and financial payback periods. (4) Where to Find Help: Provides a directory of organizations associated with motors and drives, as well asmore » resources for additional information, tools, software, videos, and training opportunities.« less

Improving the Trainee Socialization Process in Basic Combat Training

DTIC Science & Technology

2011-01-01

NUMBER 633007 5d. TASK NUMBER 359 5e. WORK UNIT NUMBER 7. PERFORMING ORGANIZATION NAME(S) AND ADDRESS(ES) The Wexford Group Int’l...Fort Benning, GA 31995-2086 8. PERFORMING ORGANIZATION REPORT NUMBER 9...Virginia 22202-3926 January 2011 Army Project Number Personnel Performance 633007A792 and Training Approved for public

Performance Rating Accuracy Improvement through Changes in Individual and System Characteristics.

ERIC Educational Resources Information Center

Kavanagh, Michael J.

Although the quest for better measurement of individual job performance has generated considerable empirical research in industrial and organizational psychology, the feeling persists that a good job is not really being done in measuring job performance. This research project investigated the effects of differences in both individual and systems…

The California Clinical Data Project: a case study in the adoption of clinical data standards for quality improvement.

PubMed

Sujansky, Walter; Chang, Sophia

2006-01-01

The California Clinical Data Project is a statewide initiative to remove barriers to the widespread and effective use of information technology to improve chronic disease care. The project is a case study in the development and widespread adoption of clinical data standards by varied and often competing stakeholders. As an initial step, the project defined precise data standards for the batch reporting of pharmacy claims data and laboratory results data. These uniform standards facilitate the flow of existing electronic clinical information into disease registries and electronic health record systems. Pharmacy and lab results data now are being exchanged electronically with this standard among the largest health plans, medical groups, and clinical laboratories participating in California's pay-for-performance programs. Lessons from this project may apply to the development and adoption of data standards for other states and locales and for the emerging national health information infrastructure.

Projected techno-economic improvements for advanced solar thermal power plants

NASA Technical Reports Server (NTRS)

Fujita, T.; Manvi, R.; Roschke, E. J.

1979-01-01

The projected characteristics of solar thermal power plants (with outputs up to 10 MWe) employing promising advanced technology subsystems/components are compared to current (or pre-1985) steam-Rankine systems. Improvements accruing to advanced technology development options are delineated. The improvements derived from advanced systems result primarily from achieving high efficiencies via solar collector systems which (1) capture a large portion of the available insolation and (2) concentrate this captured solar flux to attain high temperatures required for high heat engine/energy conversion performance. The most efficient solar collector systems employ two-axis tracking. Attractive systems include the central receiver/heliostat and the parabolic dish.

Regional Scale Meteorological Analysis and Prediction Using GPS Occultation and EOS Data

NASA Technical Reports Server (NTRS)

Bromwich, David H.; Shum, C. K.; Zhao, Changyin; Kuo, Bill; Rocken, Chris

2004-01-01

The main objective of the research under this award is to improve regional meteorological analysis and prediction for traditionally data limited regions, particularly over the Southern Ocean and Antarctica, using the remote sensing observations from current and upcoming GPS radio occultation missions and the EOS instrument suite. The major components of this project are: 1.Develop and improve the methods for retrieving temperature, moisture, and pressure profiles from GPS radio occultation data and EOS radiometer data. 2. Develop and improve a regional scale data assimilation system (MM5 4DVAR). 3. Perform case studies involving data analysis and numerical modeling to investigate the impact of different data for regional meteorological analysis and the importance of data assimilation for regional meteorological simulation over the Antarctic region. 4. Apply the findings and improvements from the above studies to weather forecasting experiments. 5. In the third year of the award we made significant progress toward the remaining goals of the project. The work included carefully evaluating the performance of an atmospheric mesoscale model, the Polar MM5 in Antarctic applications and improving the upper boundary condition.

Demonstrating and Evaluating an Action Learning Approach to Building Project Management Competence

NASA Technical Reports Server (NTRS)

Kotnour, Tim; Starr, Stan; Steinrock, T. (Technical Monitor)

2001-01-01

This paper contributes a description of an action-learning approach to building project management competence. This approach was designed, implemented, and evaluated for use with the Dynacs Engineering Development Contract at the Kennedy Space Center. The aim of the approach was to improve three levels of competence within the organization: individual project management skills, project team performance. and organizational capabilities such as the project management process and tools. The overall steps to the approach, evaluation results, and lessons learned are presented. Managers can use this paper to design a specific action-learning approach for their organization.

How an educational improvement project improved the summative evaluation of medical students.

PubMed

Hoffman, K G; Brown, R Margaret A; Gay, J W; Headrick, L A

2009-08-01

At the University of Missouri-Columbia School of Medicine (USA) "commitment to improving quality and safety in healthcare" is one of eight key characteristics set as goals for our graduates. As educators, commitment to continuous improvement in the educational experience has been modelled through improvement of the Medical Student Performance Evaluation (MSPE) letter (formerly the Dean's letter). This educational improvement project decreased waste, increased collaboration and developed locally useful knowledge. By applying continuous improvement principles to the construction of the MSPE the overall efficiency of the process could be enhanced, and the MSPE committee was able to spend less cognitive energy on structure and format and focus more on the content of the letters. Four MSPE cycles have been completed using a new Web-based system; after each cycle, additional enhancements were identified and implemented. This work adds to the literature, as it describes the application of continuous improvement principles to an educational system.

How Configuration Management (CM) Can Help Project Teams To Innovate and Communicate

NASA Technical Reports Server (NTRS)

Cioletti, Louis

2009-01-01

Traditionally, CM is relegated to a support role in project management activities. CM s traditional functions of identification, change control, status accounting, and audits/verification are still necessary and play a vital role. However, this presentation proposes CM s role in a new and innovative manner that will significantly improve communication throughout the organization and, in turn, augment the project s success. CM s new role is elevated to the project management level, above the engineering or sub-project level in the Work Breakdown Structure (WBS), where it can more effectively accommodate changes, reduce corrective actions, and ensure that requirements are clear, concise, and valid, and that results conform to the requirements. By elevating CM s role in project management and orchestrating new measures, a new communication will emerge that will improve information integrity, structured baselines, interchangeability/traceability, metrics, conformance to standards, and standardize the best practices in the organization. Overall project performance (schedule, quality, and cost) can be no better than the ability to communicate requirements which, in turn, is no better than the CM process to communicate project decisions and the correct requirements.

Evaluation of US 119 Pine Mountain safety improvements : final report.

DOT National Transportation Integrated Search

2007-09-01

The Transportation Center at the University of Kentucky was requested to perform an evaluation of the safety improvement project over a 7.1-mile section of US 119 on t he Whitesburg side of Pine Mountain in Letcher County to determine whether the typ...

Federal motor carrier safety administration safety 2010 strategy and performance planning : project description

DOT National Transportation Integrated Search

2000-12-01

The Motor Carrier Safety Improvement Act (MCSIA) of 1999, Pub. L. 106-159, created the Federal Motor Carrier Safety Administration (FMCSA) in January 2000. Section 104 of the Act requires the Secretary to develop a long-term strategy for improving co...

Report: Improving Nationwide Effectiveness of Pump-and-Treat Remedies Requires Sustained and Focused Action to Realize Benefits

EPA Pesticide Factsheets

Report #2003-P-000006, March 27, 2003. We found that, generally, the pump-and-treat optimization project has produced valuable information and recommendations for improvement regarding the cost and performance of Superfund-financed pump-and-treat systems.

Applying the min-projection strategy to improve the transient performance of the three-phase grid-connected inverter.

PubMed

Baygi, Mahdi Oloumi; Ghazi, Reza; Monfared, Mohammad

2014-07-01

Applying the min-projection strategy (MPS) to a three-phase grid-connected inverter to improve its transient performance is the main objective of this paper. For this purpose, the inverter is first modeled as a switched linear system. Then, the feasibility of the MPS technique is investigated and the stability criterion is derived. Hereafter, the fundamental equations of the MPS for the control of the inverter are obtained. The proposed scheme is simulated in PSCAD/EMTDC environment. The validity of the MPS approach is confirmed by comparing the obtained results with those of VOC method. The results demonstrate that the proposed method despite its simplicity provides an excellent transient performance, fully decoupled control of active and reactive powers, acceptable THD level and a reasonable switching frequency. Copyright © 2014 ISA. Published by Elsevier Ltd. All rights reserved.

The effects of a coaching project in nursing on the coaches' training motivation, training outcomes, and job performance: an experimental study.

PubMed

Kushnir, Talma; Ehrenfeld, Mally; Shalish, Yael

2008-06-01

Coaching is known to benefit both the trainees and the coaches, yet research in nursing has mainly focused on the benefits to the trainees. There is little knowledge regarding the psycho-educational effects of being a coach. To determine the effects of participation in a coaching project in nursing, on the coaches' training motivation, skills acquisition, self-efficacy, professional attitudes, transfer of training and professional performance. It was hypothesized that participation in the project would significantly improve all these outcomes among the coaches but not in a control group. An experimental study. An innovative educational program was instituted over the last 10 years in an academic School of Nursing in Israel. Recent graduates in nursing (i.e., coaches) assisted junior students in their studies. All graduates of one class were randomly assigned to either the experimental (22 coaches) or control group (30 similar graduates who would not be coaches). The groups were similar in the demographic details and grade-point average. Research instruments included self-report measures and performance in a simulation test (Objective Structured Clinical Examination). Compared with the control group the coaches improved in training motivation, self-efficacy and behavioral transfer of several nursing skills. Participation also prevented deterioration of some skills (e.g., medication management, communication skills). This stability was in contrast with the decline in most outcomes in the control group. The coaches also obtained positive behavioral transfer and demonstrated superior professional performance (OSCE). Professional attitudes were not affected. Participation in the project enabled the coaches to enhance some of their professional skills, and improve their training motivation and self-efficacy in performing complex nursing skills. Coaching made an important contribution in facilitating the nurses' passage from school to the professional work field and could be a form of staff development.

Ceramic Coatings for Clad (The C 3 Project): Advanced Accident-Tolerant Ceramic Coatings for Zr-Alloy Cladding

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sickafus, Kurt E.; Wirth, Brian; Miller, Larry

The goal of this NEUP-IRP project is to develop a fuel concept based on an advanced ceramic coating for Zr-alloy cladding. The coated cladding must exhibit demonstrably improved performance compared to conventional Zr-alloy clad in the following respects: During normal service, the ceramic coating should decrease cladding oxidation and hydrogen pickup (the latter leads to hydriding and embrittlement). During a reactor transient (e.g., a loss of coolant accident), the ceramic coating must minimize or at least significantly delay oxidation of the Zr-alloy cladding, thus reducing the amount of hydrogen generated and the oxygen ingress into the cladding. The specific objectivesmore » of this project are as follows: To produce durable ceramic coatings on Zr-alloy clad using two possible routes: (i) MAX phase ceramic coatings or similar nitride or carbide coatings; and (ii) graded interface architecture (multilayer) ceramic coatings, using, for instance, an oxide such as yttria-stabilized zirconia (YSZ) as the outer protective layer. To characterize the structural and physical properties of the coated clad samples produced in 1. above, especially the corrosion properties under simulated normal and transient reactor operating conditions. To perform computational analyses to assess the effects of such coatings on fuel performance and reactor neutronics, and to perform fuel cycle analyses to assess the economic viability of modifying conventional Zr-alloy cladding with ceramic coatings. This project meets a number of the goals outlined in the NEUP-IRP call for proposals, including: Improve the fuel/cladding system through innovative designs (e.g. coatings/liners for zirconium-based cladding) Reduce or eliminate hydrogen generation Increase resistance to bulk steam oxidation Achievement of our goals and objectives, as defined above, will lead to safer light-water reactor (LWR) nuclear fuel assemblies, due to improved cladding properties and built-in accident resistance, as well as the possibilities for enhanced fuel/clad system performance and longevity.« less

Understanding patient safety performance and educational needs using the 'Safety-II' approach for complex systems.

PubMed

McNab, Duncan; Bowie, Paul; Morrison, Jill; Ross, Alastair

2016-11-01

Participation in projects to improve patient safety is a key component of general practice (GP) specialty training, appraisal and revalidation. Patient safety training priorities for GPs at all career stages are described in the Royal College of General Practitioners' curriculum. Current methods that are taught and employed to improve safety often use a 'find-and-fix' approach to identify components of a system (including humans) where performance could be improved. However, the complex interactions and inter-dependence between components in healthcare systems mean that cause and effect are not always linked in a predictable manner. The Safety-II approach has been proposed as a new way to understand how safety is achieved in complex systems that may improve quality and safety initiatives and enhance GP and trainee curriculum coverage. Safety-II aims to maximise the number of events with a successful outcome by exploring everyday work. Work-as-done often differs from work-as-imagined in protocols and guidelines and various ways to achieve success, dependent on work conditions, may be possible. Traditional approaches to improve the quality and safety of care often aim to constrain variability but understanding and managing variability may be a more beneficial approach. The application of a Safety-II approach to incident investigation, quality improvement projects, prospective analysis of risk in systems and performance indicators may offer improved insight into system performance leading to more effective change. The way forward may be to combine the Safety-II approach with 'traditional' methods to enhance patient safety training, outcomes and curriculum coverage.

Teaching a Systems Approach: An Innovative Quality Improvement Project.

PubMed

Hamrin, Vanya; Vick, Rose; Brame, Cynthia; Simmons, Megan; Smith, Letizia; Vanderhoef, Dawn

2016-04-01

Nurse practitioners are required to navigate complex health care systems. Quality improvement (QI) projects provide the opportunity for nurse practitioner students to learn systems knowledge and improve health care outcomes in patient populations. A gap in the literature exists around how to systematically teach, apply, and measure QI curricular objectives at the master's level. Six faculty evaluated the QI project for the psychiatric nurse practitioner master's program by identifying the most challenging QI concepts for students to apply, revising their teaching strategies to address gaps, and retrospectively evaluating the outcomes of these curriculum changes by comparing student outcomes before and after the curricular changes. A significant difference was noted on QI project performance between students in the 2014 and 2015 graduating classes, measured by the scores earned on students' final papers (t[92] = 1.66, p = .05, d = .34, r(2) = .0289). Theoretical principles of adult and cooperative learning were used to inform curricular changes to enhance student's acquisition of QI skills. Copyright 2016, SLACK Incorporated.

Guidance for improving foundation layers to increase pavement performance on local roads.

DOT National Transportation Integrated Search

2014-11-01

This document is the second of two deliverables for the project Optimizing Pavement Base, Subbase, and Subgrade Layers : for Cost and Performance on Local Roads (TR-640). The first deliverable is the 454-page Final Field Data Report. The field : data...

77 FR 59399 - The President's Management Advisory Board (PMAB); Notification of Upcoming Public Advisory Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-27

... Information Technology (IT) portfolio and project management, IT vendor performance management, Senior Executive Service (SES) leadership development and SES performance appraisal systems. More detailed... for the implementation of best business practices to improve Federal Government management and...

Integrating Human Factors into Space Vehicle Processing for Risk Management

NASA Technical Reports Server (NTRS)

Woodbury, Sarah; Richards, Kimberly J.

2008-01-01

This presentation will discuss the multiple projects performed in United Space Alliance's Human Engineering Modeling and Performance (HEMAP) Lab, improvements that resulted from analysis, and the future applications of the HEMAP Lab for risk assessment by evaluating human/machine interaction and ergonomic designs.

Advanced photovoltaic solar array - Design and performance

NASA Technical Reports Server (NTRS)

Kurland, Richard; Stella, Paul

1992-01-01

This paper reports on the development of an ultralightweight flexible blanket, flatpack, foldout solar array design that can provide 3- to 4-fold improvement on specific power performance of current rigid panel arrays and a factor of two improvement over a first-generation flexible blanket array developed as a forerunner to the Space Station Freedom array. To date a prototype wing has been built with a projected specific power performance of about 138 W/kg at beginning-of-life (BOL) and 93 W/kg end-of-life (EOL) at 12 kW (BOL) for a 10-year geosynchronous (GEO) mission. The prototype wing hardware has been subjected to a series of system-level tests to demonstrate design feasibility. The design of the array is summarized. The major trade studies that led to the selection of the baseline design are discussed. Key system-level and component-level testing are described. Array-level performance projections are presented as a function of existing and advanced solar array component technology for various mission applications.

Bilingual Pupil Services E.C.I.A. Chapter 1. O.E.E. Evaluation Report, 1982-1983.

ERIC Educational Resources Information Center

Fernandez, Carmen M.; Schulman, Robert

The primary goal of New York City's Bilingual Pupil Services project was to improve the academic performance and linguistic proficiency of Spanish-speaking limited English proficient students in grades 1-6. The project was designed to achieve this goal through a program which trained and supervised bilingual paraprofessionals who provided direct…

The Project L.I.F.T. Story: Early Lessons from a Public-Private Education Turnaround Initiative

ERIC Educational Resources Information Center

Kim, Juli; Ellison, Shonaka

2015-01-01

Leading Charlotte foundations formed a funding collaborative to support a five-year district turnaround initiative to dramatically improve educational outcomes for students in the West Charlotte High School corridor, one of the city's lowest-performing feeder zones. The "Project L.I.F.T." initiative involves four areas of education…

Aeronautical technology 2000: A projection of advanced vehicle concepts

NASA Technical Reports Server (NTRS)

1985-01-01

The Aeronautics and Space Engineering Board (ASEB) of the National Research Council conducted a Workshop on Aeronautical Technology: a Projection to the Year 2000 (Aerotech 2000 Workshop). The panels were asked to project advances in aeronautical technologies that could be available by the year 2000. As the workshop was drawing to a close, it became evident that a more comprehensive investigation of advanced air vehicle concepts than was possible in the limited time available at the workshop would be valuable. Thus, a special panel on vehicle applications was organized. In the course of two meetings, the panel identified and described representative types of aircraft judged possible with the workshop's technology projections. These representative aircraft types include: military aircraft; transport aircraft; rotorcraft; extremely high altitude aircraft; and transatmospheric aircraft. Improvements in performance, efficiency, and operational characteristics possible through the application of the workshop's year 2000 technology projections were discussed. The subgroups also identified the technologies considered essential and enhancing or supporting to achieve the projected aircraft improvements.

Advanced Hydrogen Liquefaction Process

DOE Office of Scientific and Technical Information (OSTI.GOV)

Schwartz, Joseph; Kromer, Brian; Neu, Ben

2011-09-28

The project identified and quantified ways to reduce the cost of hydrogen liquefaction, and reduce the cost of hydrogen distribution. The goal was to reduce the power consumption by 20% and then to reduce the capital cost. Optimizing the process, improving process equipment, and improving ortho-para conversion significantly reduced the power consumption of liquefaction, but by less than 20%. Because the efficiency improvement was less than the target, the program was stopped before the capital cost was addressed. These efficiency improvements could provide a benefit to the public to improve the design of future hydrogen liquefiers. The project increased themore » understanding of hydrogen liquefaction by modeling different processes and thoroughly examining ortho-para separation and conversion. The process modeling provided a benefit to the public because the project incorporated para hydrogen into the process modeling software, so liquefaction processes can be modeled more accurately than using only normal hydrogen. Adding catalyst to the first heat exchanger, a simple method to reduce liquefaction power, was identified, analyzed, and quantified. The demonstrated performance of ortho-para separation is sufficient for at least one identified process concept to show reduced power cost when compared to hydrogen liquefaction processes using conventional ortho-para conversion. The impact of improved ortho-para conversion can be significant because ortho para conversion uses about 20-25% of the total liquefaction power, but performance improvement is necessary to realize a substantial benefit. Most of the energy used in liquefaction is for gas compression. Improvements in hydrogen compression will have a significant impact on overall liquefier efficiency. Improvements to turbines, heat exchangers, and other process equipment will have less impact.« less

Design, fabrication, and test of a steel spar wind turbine blade

NASA Technical Reports Server (NTRS)

Sullivan, T. L.; Sirocky, P. J., Jr.; Viterna, L. A.

1979-01-01

The design and fabrication of wind turbine blades based on 60 foot steel spars are discussed. Performance and blade load information is given and compared to analytical prediction. In addition, performance is compared to that of the original MOD-O aluminum blades. Costs for building the two blades are given, and a projection is made for the cost in mass production. Design improvements to reduce weight and improve fatigue life are suggested.

Cross-Layer Design Approach for Wireless Networks to Improve the Performance POSTPRINT)

DTIC Science & Technology

2010-06-01

Yenumula B. Reddy, Nandigam Gajendar, and Sophal Chao Grambling State University JUNE 2010 Approved for public release; distribution...J. Smith, Yenumula B. Reddy, Nandigam Gajendar, and Sophal Chao 5d. PROJECT NUMBER 7622 5e. TASK NUMBER 11 5f. WORK UNIT NUMBER 7622110P...Z39-18 Cross-Layer Design Approach for Wireless Networks to Improve the Performance Nikema J. Smith, Yenumula B. Reddy, and Nandigam Gajendar

Development of Novel Integrated Antennas for CubeSats

NASA Technical Reports Server (NTRS)

Jackson, David; Fink, Patrick W.; Martinez, Andres; Petro, Andrew

2015-01-01

The Development of Novel Integrated Antennas for CubeSats project is directed at the development of novel antennas for CubeSats to replace the bulky and obtrusive antennas (e.g., whip antennas) that are typically used. The integrated antennas will not require mechanical deployment and thus will allow future CubeSats to avoid potential mechanical problems and therefore improve mission reliability. Furthermore, the integrated antennas will have improved functionality and performance, such as circular polarization for improved link performance, compared with the conventional antennas currently used on CubeSats.

United States Supports Distributed Wind Technology Improvements; NREL (National Renewable Energy Laboratory)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sinclair, Karin

2015-06-15

This presentation provides information on the activities conducted through the Competitiveness Improvement Project (CIP), initiated in 2012 by the U.S. Department of Energy (DOE) and executed through the National Renewable Energy Laboratory (NREL) to support the distributed wind industry. The CIP provides research and development funding and technical support to improve distributed wind turbine technology and increase the competitiveness of U.S. small and midsize wind turbine manufacturers. Through this project, DOE/NREL assists U.S. manufacturers to lower the levelized cost of energy of wind turbines through component improvements, manufacturing process upgrades, and turbine testing. Ultimately, this support is expected to leadmore » to turbine certification through testing to industry-recognized wind turbine performance and safety standards.« less

A New Framework for Adptive Sampling and Analysis During Long-Term Monitoring and Remedial Action Management

DOE Office of Scientific and Technical Information (OSTI.GOV)

Minsker, Barbara

2005-06-01

Yonas Demissie, a research assistant supported by the project, has successfully created artificial data and assimilated it into coupled Modflow and artificial neural network models. His initial findings show that the neural networks help correct errors in the Modflow models. Abhishek Singh has used test cases from the literature to show that performing model calibration with an interactive genetic algorithm results in significantly improved parameter values. Meghna Babbar, the third research assistant supported by the project, has found similar results when applying an interactive genetic algorithms to long-term monitoring design. She has also developed new types of interactive genetic algorithmsmore » that significantly improve performance. Gayathri Gopalakrishnan, the last research assistant who is partially supported by the project, has shown that sampling branches of phytoremediation trees is an accurate approach to estimating soil and groundwater contaminations in areas surrounding the trees at the Argonne 317/319 site.« less

Situation, Background, Assessment, and Recommendation-Guided Huddles Improve Communication and Teamwork in the Emergency Department.

PubMed

Martin, Heather A; Ciurzynski, Susan M

2015-11-01

Thousands of people die annually in hospitals because of poor communication and teamwork between health care team members. Standardized tools and strategies help increase the amount and quality of communication. Two structured communication methods include implementing huddles and the use of the situation, background, assessment, and recommendation (SBAR) communication framework. To improve communication among nurse practitioners and registered nurses within a pediatric emergency department, a performance-improvement project with the structured processes of a joint patient evaluation and huddle was implemented. Data were gathered from 32 nurses and 2 nurse practitioners using structured observation and pre- and post-implementation surveys. The following outcomes were measured: presence or absence of joint patient evaluation and SBAR-guided huddle, verbalization of treatment plan, communication, teamwork, and nurse satisfaction. Eighty-three percent of patient encounters included a joint evaluation. A huddle structured with SBAR was conducted 86% of the time. Registered nurses and nurse practitioners verbalized patients' treatment plans in 89% of cases and 97% of cases, respectively. Improved teamwork, communication, and nursing satisfaction scores were demonstrated among the nurse practitioners and registered nurses. This project showed the feasibility of a simple and inexpensive joint nurse practitioner-registered nurse patient evaluation followed by a structured huddle, which improved communication, teamwork, and nurse satisfaction scores. This performance-improvement project has the potential to enhance efficiency by reducing redundancy, as well as to improve patient safety through the use of structured communication techniques. Copyright © 2015 Emergency Nurses Association. Published by Elsevier Inc. All rights reserved.

Improved performance of near UV light-emitting diodes with a composition-graded p-AlGaN irregular sawtooth electron-blocking layer

NASA Astrophysics Data System (ADS)

Qin, Ping; Song, Wei-Dong; Hu, Wen-Xiao; Zhang, Yuan-Wen; Zhang, Chong-Zhen; Wang, Ru-Peng; Zhao, Liang-Liang; Xia, Chao; Yuan, Song-Yang; Yin, Yi-an; Li, Shu-Ti; Su, Shi-Chen

2016-08-01

We investigate the performances of the near-ultraviolet (about 350 nm-360 nm) light-emitting diodes (LEDs) each with specifically designed irregular sawtooth electron blocking layer (EBL) by using the APSYS simulation program. The internal quantum efficiencies (IQEs), light output powers, carrier concentrations in the quantum wells, energy-band diagrams, and electrostatic fields are analyzed carefully. The results indicate that the LEDs with composition-graded p-Al x Ga1-x N irregular sawtooth EBLs have better performances than their counterparts with stationary component p-AlGaN EBLs. The improvements can be attributed to the improved polarization field in EBL and active region as well as the alleviation of band bending in the EBL/p-AlGaN interface, which results in less electron leakage and better hole injection efficiency, thus reducing efficiency droop and enhancing the radiative recombination rate. Project supported by the National Natural Science Foundation of China (Grant Nos. 11474105 and 51172079), the Science and Technology Program of Guangdong Province, China (Grant Nos. 2015B090903078 and 2015B010105011), the Program for Changjiang Scholars and Innovative Research Team in University, China (Grant No. IRT13064), the Science and Technology Project of Guangzhou City, China (Grant No. 201607010246), and the Science and Technology Planning Project of Guangdong Province, China (Grant No. 2015A010105025).

Improvement of energy efficiency: the use of thermography and air-tightness test in verification of thermal performance of school buildings

NASA Astrophysics Data System (ADS)

Kauppinen, Timo; Siikanen, Sami

2011-05-01

The improvement of energy efficiency is the key issue after the energy performance of buildings directive came into the force in European Union countries. The city of Kuopio participate a project, in which different tools will be used, generated and tested to improve the energy efficiency of public buildings. In this project there are 2 schools, the other consuming much more heating energy than the other same type of school. In this paper the results of the thermography in normal conditions and under 50 Pa pressure drop will be presented; as well as the results of remote controlled air tightness test of the buildings. Thermography combined with air tightness test showed clearly the reasons of specific consumption differences of heating energy - also in the other hand, the measurements showed the problems in the performance of ventilation system. Thermography, air tightness test and other supporting measurements can be used together to solve energy loss problems - if these measurements will be carried out by proper way.

Quantitative evaluation of pairs and RS steganalysis

NASA Astrophysics Data System (ADS)

Ker, Andrew D.

2004-06-01

We give initial results from a new project which performs statistically accurate evaluation of the reliability of image steganalysis algorithms. The focus here is on the Pairs and RS methods, for detection of simple LSB steganography in grayscale bitmaps, due to Fridrich et al. Using libraries totalling around 30,000 images we have measured the performance of these methods and suggest changes which lead to significant improvements. Particular results from the project presented here include notes on the distribution of the RS statistic, the relative merits of different "masks" used in the RS algorithm, the effect on reliability when previously compressed cover images are used, and the effect of repeating steganalysis on the transposed image. We also discuss improvements to the Pairs algorithm, restricting it to spatially close pairs of pixels, which leads to a substantial performance improvement, even to the extent of surpassing the RS statistic which was previously thought superior for grayscale images. We also describe some of the questions for a general methodology of evaluation of steganalysis, and potential pitfalls caused by the differences between uncompressed, compressed, and resampled cover images.

Improving Fatigue Performance of AHSS Welds

DOE Office of Scientific and Technical Information (OSTI.GOV)

Feng, Zhili; Yu, Xinghua; Erdman, III, Donald L.

Reported herein is technical progress on a U.S. Department of Energy CRADA project with industry cost-share aimed at developing the technical basis and demonstrate the viability of innovative in-situ weld residual stresses mitigation technology that can substantially improve the weld fatigue performance and durability of auto-body structures. The developed technology would be costeffective and practical in high-volume vehicle production environment. Enhancing weld fatigue performance would address a critical technology gap that impedes the widespread use of advanced high-strength steels (AHSS) and other lightweight materials for auto body structure light-weighting. This means that the automotive industry can take full advantage ofmore » the AHSS in strength, durability and crashworthiness without the concern of the relatively weak weld fatigue performance. The project comprises both technological innovations in weld residual stress mitigation and due-diligence residual stress measurement and fatigue performance evaluation. Two approaches were investigated. The first one was the use of low temperature phase transformation (LTPT) weld filler wire, and the second focused on novel thermo-mechanical stress management technique. Both technical approaches have resulted in considerable improvement in fatigue lives of welded joints made of high-strength steels. Synchrotron diffraction measurement confirmed the reduction of high tensile weld residual stresses by the two weld residual stress mitigation techniques.« less

A Method to Improve Post Impact Compressive Strength in Graphite/Epoxy Composite Materials After Low Temperature Impact

DTIC Science & Technology

1991-05-13

Acknowledgments I would like to recognize and express my deepost appreciation to all the people who made this pI:oject possible. Prol’essor Dennis F...Hasson provided exceptional guidance, knowledge, and timely suggestions that otherwise would have made this project impcssible. Mr. Dave Boll of...project, and performed the compression after impact testing of the panels. The Office of Naval Research provided the funding that made this project

76 FR 35864 - Proposed Priority; Special Demonstration Programs-National Technical Assistance Projects To...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-20

... have national significance and improve the performance of State vocational rehabilitation (VR) agencies... that State VR agencies and their partners, need national TA opportunities to improve program management and to keep informed about current effective and promising practices and research in the field of VR...

76 FR 50474 - Special Demonstration Programs-National Technical Assistance Projects To Improve Employment...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-15

... its vocational rehabilitation (VR) programs. We intend the priority to increase the transfer... the field of rehabilitation that have national significance and to improve the performance of State VR... Technical Assistance and Continuing Education (TACE) centers, and State VR agencies. For example, the...

The PISA Project: A Final Report.

ERIC Educational Resources Information Center

Buhler-Miko, Marina

With the support of a 3-year grant from the Fund for The Improvement of Postsecondary Education (FIPSE), the Higher Education Strategic Planning Institute has built a shared experience strategic planning database for college and university top-level management. The Performance Improvement through Strategy Analysis (PISA) program began in 1982 with…

Incorporating groundwater flow into the WEPP model

Treesearch

William Elliot; Erin Brooks; Tim Link; Sue Miller

2010-01-01

The water erosion prediction project (WEPP) model is a physically-based hydrology and erosion model. In recent years, the hydrology prediction within the model has been improved for forest watershed modeling by incorporating shallow lateral flow into watershed runoff prediction. This has greatly improved WEPP's hydrologic performance on small watersheds with...

Collaboration in Pennsylvania: Rapidly Spreading Improved Chronic Care for Patients to Practices

ERIC Educational Resources Information Center

Bricker, Patricia L.; Baron, Richard J.; Scheirer, Jorge J.; DeWalt, Darren A.; Derrickson, John; Yunghans, Suzanne; Gabbay, Robert A.

2010-01-01

Introduction: Pennsylvania's Improving Performance in Practice (IPIP) program is administered by the Pennsylvania (PA) chapters of the American Academy of Family Physicians, American College of Physicians, and American Academy of Pediatrics. The project has provided coaching, monthly measurement, and patient registry support for 155 primary-care…

Six Sigma: not for the faint of heart.

PubMed

Benedetto, Anthony R

2003-01-01

Six Sigma is an excellent quality and performance improvement tool. Like any tool, the results of using it are highly dependent on whether you use it with competence and on the right problem. This article will help you decide if your problem is well-suited for a Six Sigma approach and will suggest the optimum approach for planning and implementing Six Sigma methodology. Performance improvement methods can be grouped into two broad categories, based on the problem to be addressed. When the problem is relatively minor and localized, "evolutionary" methods may be suitable (e.g., quality circles, problem-solving staff meetings, continuous quality improvement [CQI], total quality management [TQM]). These tools work best when modest incremental improvements are sought, when major process redesign is not thought to be necessary, and when the avoidance of workplace disruption is desired. Reengineering and Six Sigma are the best-known examples of the "revolutionary" performance improvement methods. These methods should be used when major (drastic, do or die, etc.) improvements are needed. Problems that cross departmental boundaries need these methods. When a process is so dysfunctional that you feel like you need to tear up the standard operating procedure (SOP) and start all over again, you need a revolutionary method. A Six Sigma project requires a major expenditure of money and employee time, and a willingness to make some hard decisions about jobs, employee retention and relationships among stakeholders. An institution's culture should be considered as part of the decision about using Six Sigma. If the institution has a history of making data-driven decisions, or at least has displayed openness to operating in that manner, Six Sigma has a good chance of success. A radiology-driven Six Sigma project should not be undertaken until a comprehensive written description of the scope of the project is approved by the radiology department leadership team and by the appropriate higher-level institutional leaders. This document should address the specific outcomes desired, the resources available, a rough tentative timeline, and any political constraints imposed on the project (e.g., inviolate HR policies, compatibility with enterprise strategic goals). The document should be comprehensive enough and explicit enough to be useful as a major component of the bid package for hiring a consultant or for writing the job description for the hiring of an in-house expert. A full-time project manager should be designated if an in-house expert is not hired. This person should be a senior leader in the department, but not the department director. Leading a Six Sigma project is a full-time job in itself and cannot be performed as an additional duty. Although it may be tempting to appoint a senior staff technologist or nurse, keep in mind that the project manager must have sufficient authority to expect cooperation from departmental supervisors without resorting to frequent appeals to the department director. Contact the institution's CIO and ask that a knowledgeable person on the IT staff be appointed to serve as the IT liaison for the project. This person should have in-depth familiarity with the HIS and the ways that it interfaces with the RIS (if the RIS is not a module within the HIS). Most importantly, this liaison must understand the exact data definitions and the origins of the data that are passed between the HIS and the RIS. The steering committee should consist of at least one physician and one department-level administrator from outside of the radiology department. From within the radiology department, there should be at least one radiologist and one senior modality manager (whose modality is not the primary focus), the project manager, and the manager of a radiology component that is a focus of the project (e.g., the film library manager). The consultant should be an ex officio member without vote. The steering committee should be small enough to be manageable, yet large enough to provide insight from both the radiology department and the rest of the institution. Because of the size of the steering committee and the difficulty of bringing so many people together for meetings, the day-to-day governance of the project will be provided by an informal "operations committee." When we consider "change" in the context of a Six Sigma project, we talk about a wide variety of topics, but they can be summarized usefully as dealing with processes, policies, physical plant and equipment, personnel, and politics (or culture). The first three of these lend themselves to quantitative analysis, or at least rigorously qualitative analysis. The final two, however, are subjective, ill-defined or not readily acknowledged, and fraught with potentially major challenges when it becomes necessary to implement changes in the first three. The Six Sigma process, as taught by GE, consists of five phases summarized by the acronym DMAIC: Define, Measure, Analyze, Improve and Control. This article deals mostly with the time period from first consideration of a possible Six Sigma project through the early part of the Define phase. It also discusses pitfalls that must be considered anytime throughout a project, from first thoughts of conducting a project until recommended changes become ingrained in the department's operations. Six Sigma compares baseline or historical data to data obtained after implementation of Six Sigma-driven changes in order to determine if desired changes in performance have been achieved. When historical data are not available, the Six Sigma team must collect baseline data as one of their earliest tasks. A Six Sigma project can easily last 18 to 24 months or longer. We must be sure that the data we collect during Month 18 are collected identically to the data we collected at baseline. A major performance improvement project is likely to require 12 to 24 months or longer. Upper management initially may be reluctant to appoint the "cream of the crop" to the project teams. Success is predicated on having the most knowledgeable personnel involved in the project. Without them, the chances of success are reduced. A Six Sigma project's length always exceeds the attention span of the vast majority of its participants. The department director and project manager must anticipate this and devote special efforts to maintaining motivation and momentum after the initial flurry of activity. The complexity of a Six Sigma project will be greatly increased, and all of the pitfalls discussed here will be exacerbated, if your facility has multiple sites. At the simplest, the multiple sites will introduce complications in getting personnel to come to project meetings. The complications will escalate if the sites are under different management, such as a confederated health system. The project manager and the consultant will expend additional time and effort dealing with these issues, which likely will lengthen the project unavoidably. The project manager must spend time with the department's external customers who have significant stakes in the project. At a minimum, this should include relatively formal meetings with other department directors or subordinate managers and key physician and nurse leaders, and attendance at their managerial or staff meetings (you may need to ask to be invited). Although paper or e-mail surveys can be helpful, only sustained personal contact with a stakeholder will truly allow you to understand how they interact with radiology and what their concerns are. As with daily operational management, a performance improvement project requires attention to policies, procedures, processes, physical plant and infrastructure, personnel, and perhaps most importantly, to politics.

Sustaining Reliability on Accountability Measures at The Johns Hopkins Hospital.

PubMed

Pronovost, Peter J; Holzmueller, Christine G; Callender, Tiffany; Demski, Renee; Winner, Laura; Day, Richard; Austin, J Matthew; Berenholtz, Sean M; Miller, Marlene R

2016-02-01

In 2012 Johns Hopkins Medicine leaders challenged their health system to reliably deliver best practice care linked to nationally vetted core measures and achieve The Joint Commission Top Performer on Key Quality Measures ®program recognition and the Delmarva Foundation award. Thus, the Armstrong Institute for Patient Safety and Quality implemented an initiative to ensure that ≥96% of patients received care linked to measures. Nine low-performing process measures were targeted for improvement-eight Joint Commission accountability measures and one Delmarva Foundation core measure. In the initial evaluation at The Johns Hopkins Hospital, all accountability measures for the Top Performer program reached the required ≥95% performance, gaining them recognition by The Joint Commission in 2013. Efforts were made to sustain performance of accountability measures at The Johns Hopkins Hospital. Improvements were sustained through 2014 using the following conceptual framework: declare and communicate goals, create an enabling infrastructure, engage clinicians and connect them in peer learning communities, report transparently, and create accountability systems. One part of the accountability system was for teams to create a sustainability plan, which they presented to senior leaders. To support sustained improvements, Armstrong Institute leaders added a project management office for all externally reported quality measures and concurrent reviewers to audit performance on care processes for certain measure sets. The Johns Hopkins Hospital sustained performance on all accountability measures, and now more than 96% of patients receive recommended care consistent with nationally vetted quality measures. The initiative methods enabled the transition of quality improvement from an isolated project to a way of leading an organization.

Emergency department clinical redesign, team-based care and improvements in hospital performance: A time series analysis.

PubMed

Dinh, Michael M; Green, Timothy C; Bein, Kendall J; Lo, Serigne; Jones, Aaron; Johnson, Terence

2015-08-01

The objective was to evaluate the impact of an ED clinical redesign project that involved team-based care and early senior assessment on hospital performance. This was an interrupted time series analysis performed using daily hospital performance data 6 months before and 8 months after the implementation of the clinical redesign intervention that involved Emergency Consultant-led team-based care, redistribution of ED beds and implementation of a senior nursing coordination roles in the ED. The primary outcome was the daily National Emergency Access Target (NEAT) performance (proportion of total daily ED presentations that were admitted to an inpatient ward or discharged from ED within 4 h of arrival). Secondary outcomes were daily ALOS in ED, inpatient Clinical Emergency Response System (CERS) calls and hospital mortality. Autoregressive Integrated Moving Average analysis was used to model NEAT performance. Hospital mortality was modelled using negative binomial regression. After adjusting for patient volume, inpatient admissions, ambulance, hospital occupancy, weekends ED Consultant numbers, weekends and underlying trends, there was a 17% improvement in NEAT associated with the post-intervention period (95% CI 12, 19% P < 0.001). There was no change in the number of CERS calls and the median daily hospital mortality rate reduced from 1.04% to 0.96% (P = 0.025). An ED-focused clinical redesign project was associated with a 17% improvement in NEAT performance with no evidence of an increase in clinical deterioration on inpatient wards and evidence for an improvement in hospital mortality. © 2015 Australasian College for Emergency Medicine and Australasian Society for Emergency Medicine.

Update of the DTM thermosphere model in the framework of the H2020 project `SWAMI'

NASA Astrophysics Data System (ADS)

Bruinsma, S.; Jackson, D.; Stolle, C.; Negrin, S.

2017-12-01

In the framework of the H2020 project SWAMI (Space Weather Atmosphere Model and Indices), which is expected to start in January 2018, the CIRA thermosphere specification model DTM2013 will be improved through the combination of assimilating more density data to drive down remaining biases and a new high cadence kp geomagnetic index in order to improve storm-time performance. Five more years of GRACE high-resolution densities from 2012-2016, densities from the last year of the GOCE mission, Swarm mean densities, and mean densities from 2010-2017 inferred from the geodetic satellites at about 800 km are available now. The DTM2013 model will be compared with the new density data in order to detect possible systematic errors or other kinds of deficiencies and a first analysis will be presented. Also, a more detailed analysis of model performance under storm conditions will be provided, which will then be the benchmark to quantify model improvement expected with the higher cadence kp indices. In the SWAMI project, the DTM model will be coupled in the 120-160 km altitude region to the Met Office Unified Model in order to create a whole atmosphere model. It can be used for launch operations, re-entry computations, orbit prediction, and aeronomy and space weather studies. The project objectives and time line will be given.

A review of CARE’s Community Score Card experience and evidence

PubMed Central

Gullo, Sara; Galavotti, Christine; Altman, Lara

2016-01-01

The global community’s growing enthusiasm for the potential of social accountability approaches to improve health system performance and accelerate health progress makes it imperative that we learn from social accountability intervention implementation experience and results. To this end, we carried out a review of Cooperative for Assistance and Relief Everywhere, Inc. (CARE)’s experience with the Community Score Card© (CSC)—a social accountability approach CARE developed in Malawi. We reviewed projects that CARE implemented between 2002 and 2013 that employed the CSC and that had at least one evaluation in English. We systematically collected and synthesized information from evaluations on the projects’ characteristics, CSC-related outcomes and challenges. Eight projects, spanning five countries, met our inclusion criteria. The projects applied the CSC to various focus areas, mostly health. We identified one to three evaluations, mostly qualitative, for each project. While the evaluations had many limitations, consistency of the results, as well as the range of outcomes, suggests that the CSC is contributing to significant changes. All projects reported CSC-related governance outcomes and service outcomes. There is promising evidence that the CSC can contribute to citizen empowerment, service provider and power-holder effectiveness, accountability and responsiveness and spaces for negotiation between the two that are expanded, effective and inclusive. There is also evidence that the CSC may contribute to improvements in service availability, access, utilization and quality. The CSC seems particularly suited to building trust and strengthening relationships between the community and service providers and to improving the user-centred dimension of quality. All of the projects reported challenges, with ensuring national responsiveness and inclusion of marginalized groups in the CSC process proving to be the most intractable. To improve health system performance and accelerate health progress we recommend further CSC use, enhancements and research. PMID:27190223

Quality improvement for patient safety: project-level versus program-level learning.

PubMed

Rivard, Peter E; Parker, Victoria A; Rosen, Amy K

2013-01-01

Improving quality and patient safety is of increasing strategic importance to health care organizations. However, simply increasing the volume of quality improvement (QI) activity does not necessarily improve patient outcomes. There is a need for greater understanding of QI success factors. This study looked for differences in QI implementation across hospitals with a range of performance on Patient Safety Indicators. We conducted an exploratory comparative case study of 4 Veterans Health Administration hospitals including site visits and interviews with leaders and staff. Two themes emerged. Project-level QI learning is assessing and modifying specific QI projects relative to expectations. Program-level QI learning is assessing and modifying the overall QI endeavor. The nature of project-level QI learning was similar across sites, whereas we identified qualitative differences across organizations in program-level QI learning. The highest performing organization was evaluating and refining its overall approach to QI, whereas the others were learning how to build and control QI programs. Program-level QI learning may be key if a QI program is to succeed in improving patient outcomes. This type of organizational learning entails a big-picture, organization-wide view of QI. It also entails second-order organizational learning based on assessment not only of whether QI is being done correctly but also whether the right QI activities are being done, for the right reasons. The organization is "learning to learn." In addition to gaining mastery and control of QI, leaders regularly engage with staff in rethinking QI and experimenting with new approaches. Leaders also assess how QI activity fits in the organization's developmental journey and how it supports realization of strategy.

[Improving the continuous care process in primary care during weekends and holidays: redesigning and FMEA].

PubMed

Cañada Dorado, A; Cárdenas Valladolid, J; Espejo Matorrales, F; García Ferradal, I; Sastre Páez, S; Vicente Martín, I

2010-01-01

To describe a project carried out in order to improve the process of Continuous Health Care (CHC) on Saturdays and bank holidays in Primary Care, area number 4, Madrid. The aim of this project was to guarantee a safe and error-free service to patients receiving home health care on weekends. The urgent need for improving CHC process was identified by the Risk Management Functional Unit (RMFU) of the area. In addition, some complaints had been received from the nurses involved in the process as well as from their patients. A SWOT (Strengths, Weaknesses, Opportunities and Threats) analysis performed in 2009 highlighted a number of problems with the process. As a result, a project for improvement was drawn up, to be implemented in the following stages: 1. Redesigning and improving the existing process. 2. Application of failure mode and effect analysis (FMEA) to the new process. 3. Follow up, managing and leading the project. 4. Nurse training. 5. Implementing the process in the whole area. 6. CHC nurse satisfaction surveys. After carrying out this project, the efficiency and level of automation improved considerably. Since implementation of the process enhancement measures, no complaints have been received from patients and surveys show that CHC nurse satisfaction has improved. By using FMEA, errors were given priority and enhancement steps were taken in order to: Inform professionals, back-up personnel and patients about the process. Improve the specialist follow-up report. Provide training in ulcer patient care. The process enhancement, and especially its automation, has resulted in a significant step forward toward achieving greater patient safety. FMEA was a useful tool, which helped in taking some important actions. Finally, CHC nurse satisfaction has clearly improved. Copyright © 2009 SECA. Published by Elsevier Espana. All rights reserved.

Rationale and design of the Improving Care for Cardiovascular Disease in China (CCC) project: A national effort to prompt quality enhancement for acute coronary syndrome.

PubMed

Hao, Yongchen; Liu, Jing; Liu, Jun; Smith, Sidney C; Huo, Yong; Fonarow, Gregg C; Ma, Changsheng; Ge, Junbo; Taubert, Kathryn A; Morgan, Louise; Guo, Yang; Zhang, Qian; Wang, Wei; Zhao, Dong

2016-09-01

A sizeable gap exists between guideline recommendations for treatment of acute coronary syndrome (ACS) and application of these recommendations in clinical practice. The CCC-ACS project is a novel national quality enhancement registry designed to help medical care providers bridge this gap, thereby improving clinical outcomes for ACS patients in China. The CCC-ACS project uses data collection, analysis, feedback, rapid-cycle improvement, and performance recognition to extend the use of evidence-based guidelines throughout the health care system and improve cardiovascular health. The project was launched in 2014, with 150 centers recruited representing the diversity of care for ACS patients in tertiary hospitals across China. Clinical information for patients with ACS is collected via a Web-based data collecting platform, including patients' demographics, medical history, symptoms on arrival, in-hospital treatment and procedures, in-hospital outcomes, and discharge medications for secondary prevention. Improvement in adherence to guideline recommendations is facilitated through monthly benchmarked hospital quality reports, recognition of hospital quality achievement, and regular webinars. As of April 16, 2016, a total of 35,616 ACS cases have been enrolled. The CCC-ACS is a national hospital-based quality improvement program, aiming to increase adherence to ACS guidelines in China and improve patient outcomes. Copyright © 2016 Elsevier Inc. All rights reserved.

An Analysis of Cesarean Section and Emergency Hernia Ratios as Markers of Surgical Capacity in Low-Income Countries Affected by Humanitarian Emergencies from 2008 - 2014 at Médecins sans Frontières Operations Centre Brussels Projects.

PubMed

Stewart, Barclay; Wong, Evan; Papillon-Smith, Jessica; Trelles Centurion, Miguel Antonio; Dominguez, Lynette; Ao, Supongmeren; Jean-Paul, Basimuoneye Kahutsi; Kamal, Mustafa; Helmand, Rahmatullah; Naseer, Aamer; Kushner, Adam L

2015-03-27

Surgical capacity assessments in low-income countries have demonstrated critical deficiencies. Though vital for planning capacity improvements, these assessments are resource intensive and impractical during the planning phase of a humanitarian crisis. This study aimed to determine cesarean sections to total operations performed (CSR) and emergency herniorrhaphies to all herniorrhaphies performed (EHR) ratios from Médecins Sans Frontières Operations Centre Brussels (MSF-OCB) projects and examine if these established metrics are useful proxies for surgical capacity in low-income countries affected by crisis. All procedures performed in MSF-OCB operating theatres from July 2008 through June 2014 were reviewed. Projects providing only specialty care, not fully operational or not offering elective surgeries were excluded. Annual CSRs and EHRs were calculated for each project. Their relationship was assessed with linear regression. After applying the exclusion criteria, there were 47,472 cases performed at 13 sites in 8 countries. There were 13,939 CS performed (29% of total cases). Of the 4,632 herniorrhaphies performed (10% of total cases), 30% were emergency procedures. CSRs ranged from 0.06 to 0.65 and EHRs ranged from 0.03 to 1.0. Linear regression of annual ratios at each project did not demonstrate statistical evidence for the CSR to predict EHR [F(2,30)=2.34, p=0.11, R2=0.11]. The regression equation was: EHR = 0.25 + 0.52(CSR) + 0.10(reason for MSF-OCB assistance). Surgical humanitarian assistance projects operate in areas with critical surgical capacity deficiencies that are further disrupted by crisis. Rapid, accurate assessments of surgical capacity are necessary to plan cost- and clinically-effective humanitarian responses to baseline and acute unmet surgical needs in LICs affected by crisis. Though CSR and EHR may meet these criteria in 'steady-state' healthcare systems, they may not be useful during humanitarian emergencies. Further study of the relationship between direct surgical capacity improvements and these ratios is necessary to document their role in humanitarian settings.

An Analysis of Cesarean Section and Emergency Hernia Ratios as Markers of Surgical Capacity in Low-Income Countries Affected by Humanitarian Emergencies from 2008 – 2014 at Médecins sans Frontières Operations Centre Brussels Projects

PubMed Central

Stewart, Barclay; Wong, Evan; Papillon-Smith, Jessica; Trelles Centurion, Miguel Antonio; Dominguez, Lynette; Ao, Supongmeren; Jean-Paul, Basimuoneye Kahutsi; Kamal, Mustafa; Helmand, Rahmatullah; Naseer, Aamer; Kushner, Adam L.

2015-01-01

Background: Surgical capacity assessments in low-income countries have demonstrated critical deficiencies. Though vital for planning capacity improvements, these assessments are resource intensive and impractical during the planning phase of a humanitarian crisis. This study aimed to determine cesarean sections to total operations performed (CSR) and emergency herniorrhaphies to all herniorrhaphies performed (EHR) ratios from Médecins Sans Frontières Operations Centre Brussels (MSF-OCB) projects and examine if these established metrics are useful proxies for surgical capacity in low-income countries affected by crisis. Methods: All procedures performed in MSF-OCB operating theatres from July 2008 through June 2014 were reviewed. Projects providing only specialty care, not fully operational or not offering elective surgeries were excluded. Annual CSRs and EHRs were calculated for each project. Their relationship was assessed with linear regression. Results: After applying the exclusion criteria, there were 47,472 cases performed at 13 sites in 8 countries. There were 13,939 CS performed (29% of total cases). Of the 4,632 herniorrhaphies performed (10% of total cases), 30% were emergency procedures. CSRs ranged from 0.06 to 0.65 and EHRs ranged from 0.03 to 1.0. Linear regression of annual ratios at each project did not demonstrate statistical evidence for the CSR to predict EHR [F(2,30)=2.34, p=0.11, R2=0.11]. The regression equation was: EHR = 0.25 + 0.52(CSR) + 0.10(reason for MSF-OCB assistance). Conclusion: Surgical humanitarian assistance projects operate in areas with critical surgical capacity deficiencies that are further disrupted by crisis. Rapid, accurate assessments of surgical capacity are necessary to plan cost- and clinically-effective humanitarian responses to baseline and acute unmet surgical needs in LICs affected by crisis. Though CSR and EHR may meet these criteria in ‘steady-state’ healthcare systems, they may not be useful during humanitarian emergencies. Further study of the relationship between direct surgical capacity improvements and these ratios is necessary to document their role in humanitarian settings. PMID:25905025

The Computer in Performance and Instruction: Or, How to Tell the True Color of a Chameleon.

ERIC Educational Resources Information Center

Davis, Richard

1979-01-01

Discusses such potential uses for the computer in employee training programs as management support for training and performance, training project control, improved design and development methods, training program implementation and delivery, and program evaluation, revision, and maintenance. (JEG)

The Strategic Data Project's Strategic Performance Indicators

ERIC Educational Resources Information Center

Page, Lindsay C.; Fullerton, Jon; Bacher-Hicks, Andrew; Owens, Antoniya; Cohodes, Sarah R.; West, Martin R.; Glover, Sarah

2013-01-01

Strategic Performance Indicators (SPIs) are summary measures derived from parallel, descriptive analyses conducted across educational agencies. The SPIs are designed to inform agency management and efforts to improve student outcomes. We developed the SPIs to reveal patterns common across partner agencies, to highlight exceptions to those…

Development of an economical, thin, quiet, long-lasting, high friction surface layer, volume 1 : mix design and lab performance testing.

DOT National Transportation Integrated Search

2013-03-01

This project developed and evaluated four new asphalt concrete (AC) mixtures that use locally available : aggregates whenever possible with the ultimate goal of a cost-effective mixture that also improves pavement : performance. Although numerous tac...

Modernizing the State Education Agency: Different Paths toward Performance Management

ERIC Educational Resources Information Center

Murphy, Patrick; Rainey, Lydia

2012-01-01

This project examines how eight state education agencies engaged the charge of improving their lowest-performing schools. The states examined are among the most active and intentional in this regard. In many ways, they are at the leading edge of what could eventually become 50 different experiments in performance management. By focusing on states…

Performance-Based Contracting in Residential Care and Treatment: Driving Policy and Practice Change through Public-Private Partnership in Illinois

ERIC Educational Resources Information Center

Kearney, Kathleen A.; McEwen, Erwin; Bloom-Ellis, Brice; Jordan, Neil

2010-01-01

The National Quality Improvement Center on the Privatization of Child Welfare Services selected Illinois as a demonstration site in 2007 to evaluate performance-based contracting in residential treatment services. This article discusses the first two years of project implementation including developing residential treatment performance indicators,…

Mentoring Human Performance - 12480

DOE Office of Scientific and Technical Information (OSTI.GOV)

Geis, John A.; Haugen, Christian N.

2012-07-01

Although the positive effects of implementing a human performance approach to operations can be hard to quantify, many organizations and industry areas are finding tangible benefits to such a program. Recently, a unique mentoring program was established and implemented focusing on improving the performance of managers, supervisors, and work crews, using the principles of Human Performance Improvement (HPI). The goal of this mentoring was to affect behaviors and habits that reliably implement the principles of HPI to ensure continuous improvement in implementation of an Integrated Safety Management System (ISMS) within a Conduct of Operations framework. Mentors engaged with personnel inmore » a one-on-one, or one-on-many dialogue, which focused on what behaviors were observed, what factors underlie the behaviors, and what changes in behavior could prevent errors or events, and improve performance. A senior management sponsor was essential to gain broad management support. A clear charter and management plan describing the goals, objectives, methodology, and expected outcomes was established. Mentors were carefully selected with senior management endorsement. Mentors were assigned to projects and work teams based on the following three criteria: 1) knowledge of the work scope; 2) experience in similar project areas; and 3) perceived level of trust they would have with project management, supervision, and work teams. This program was restructured significantly when the American Reinvestment and Recovery Act (ARRA) and the associated funding came to an end. The program was restructured based on an understanding of the observations, attributed successes and identified shortfalls, and the consolidation of those lessons. Mentoring the application of proven methods for improving human performance was shown effective at increasing success in day-to-day activities and increasing confidence and level of skill of supervisors. While mentoring program effectiveness is difficult to measure, and return on investment is difficult to quantify, especially in complex and large organizations where the ability to directly correlate causal factors can be challenging, the evidence presented by Sydney Dekker, James Reason, and others who study the field of human factors does assert managing and reducing error is possible. Employment of key behaviors-HPI techniques and skills-can be shown to have a significant impact on error rates. Our mentoring program demonstrated reduced error rates and corresponding improvements in safety and production. Improved behaviors are the result, of providing a culture with consistent, clear expectations from leadership, and processes and methods applied consistently to error prevention. Mentoring, as envisioned and executed in this program, was effective in helping shift organizational culture and effectively improving safety and production. (authors)« less

Final Project Report: Data Locality Enhancement of Dynamic Simulations for Exascale Computing

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shen, Xipeng

The goal of this project is to develop a set of techniques and software tools to enhance the matching between memory accesses in dynamic simulations and the prominent features of modern and future manycore systems, alleviating the memory performance issues for exascale computing. In the first three years, the PI and his group have achieves some significant progress towards the goal, producing a set of novel techniques for improving the memory performance and data locality in manycore systems, yielding 18 conference and workshop papers and 4 journal papers and graduating 6 Ph.Ds. This report summarizes the research results of thismore » project through that period.« less

Using Technology Readiness Level (TRL), Life Cycle Cost (LCC), and Other Metrics to Supplement Equivalent System Mass (ESM) in Advanced Life Support (ALS)

NASA Technical Reports Server (NTRS)

Jones, Harry

2003-01-01

The ALS project plan goals are reducing cost, improving performance, and achieving flight readiness. ALS selects projects to advance the mission readiness of low cost, high performance technologies. The role of metrics is to help select good projects and report progress. The Equivalent Mass (EM) of a system is the sum of the estimated mass of the hardware, of its required materials and spares, and of the pressurized volume, power supply, and cooling system needed to support the hardware in space. EM is the total payload launch mass needed to provide and support a system. EM is directly proportional to the launch cost.

Domains associated with successful quality improvement in healthcare - a nationwide case study.

PubMed

Brandrud, Aleidis Skard; Nyen, Bjørnar; Hjortdahl, Per; Sandvik, Leiv; Helljesen Haldorsen, Gro Sævil; Bergli, Maria; Nelson, Eugene C; Bretthauer, Michael

2017-09-13

There is a distinct difference between what we know and what we do in healthcare: a gap that is impairing the quality of the care and increasing the costs. Quality improvement efforts have been made worldwide by learning collaboratives, based on recognized continual improvement theory with limited scientific evidence. The present study of 132 quality improvement projects in Norway explores the conditions for improvement from the perspectives of the frontline healthcare professionals, and evaluates the effectiveness of the continual improvement method. An instrument with 25 questions was developed on prior focus group interviews with improvement project members who identified features that may promote or inhibit improvement. The questionnaire was sent to 189 improvement projects initiated by the Norwegian Medical Association, and responded by 70% (132) of the improvement teams. A sub study of their final reports by a validated instrument, made us able to identify the successful projects and compare their assessments with the assessments of the other projects. A factor analysis with Varimax rotation of the 25 questions identified five domains. A multivariate regression analysis was used to evaluate the association with successful quality improvements. Two of the five domains were associated with success: Measurement and Guidance (p = 0.011), and Professional environment (p = 0.015). The organizational leadership domain was not associated with successful quality improvements (p = 0.26). Our findings suggest that quality improvement projects with good guidance and focus on measurement for improvement have increased likelihood of success. The variables in these two domains are aligned with improvement theory and confirm the effectiveness of the continual improvement method provided by the learning collaborative. High performing professional environments successfully engaged in patient-centered quality improvement if they had access to: (a) knowledge of best practice provided by professional subject matter experts, (b) knowledge of current practice provided by simple measurement methods, assisted by (c) improvement knowledge experts who provided useful guidance on measurement, and made the team able to organize the improvement efforts well in spite of the difficult resource situation (time and personnel). Our findings may be used by healthcare organizations to develop effective infrastructure to support improvement and to create the conditions for making quality and safety improvement a part of everyone's job.

A Novel Approach to Practice-Based Learning and Improvement Using a Web-Based Audit and Feedback Module

PubMed Central

Boggan, Joel C.; Cheely, George; Shah, Bimal R.; Heffelfinger, Randy; Springall, Deanna; Thomas, Samantha M.; Zaas, Aimee; Bae, Jonathan

2014-01-01

Background Systematically engaging residents in large programs in quality improvement (QI) is challenging. Objective To coordinate a shared QI project in a large residency program using an online tool. Methods A web-based QI tool guided residents through a 2-phase evaluation of performance of foot examinations in patients with diabetes. In phase 1, residents completed reviews of health records with online data entry. Residents were then presented with personal performance data relative to peers and were prompted to develop improvement plans. In phase 2, residents again reviewed personal performance. Rates of performance were compared at the program and clinic levels for each phase, with data presented for residents. Acceptability was measured by the number of residents completing each phase. Feasibility was measured by estimated faculty, programmer, and administrator time and costs. Results Seventy-nine of 86 eligible residents (92%) completed improvement plans and reviewed 1471 patients in phase 1, whereas 68 residents (79%) reviewed 1054 patient charts in phase 2. Rates of performance of examination increased significantly between phases (from 52% to 73% for complete examination, P < .001). Development of the tool required 130 hours of programmer time. Project analysis and management required 6 hours of administrator and faculty time monthly. Conclusions An online tool developed and implemented for program-wide QI initiatives successfully engaged residents to participate in QI activities. Residents using this tool demonstrated improvement in a selected quality target. This tool could be adapted by other graduate medical education programs or for faculty development. PMID:26279782

Household survey analysis of the impact of comprehensive strategies to improve the expanded programme on immunisation at the county level in western China, 2006–2010

PubMed Central

Zhou, Yuqing; Xing, Yi; Liang, Xiaofeng; Yue, Chenyan; Zhu, Xu; Hipgrave, David

2016-01-01

Objective To evaluate interventions to improve routine vaccination coverage and caregiver knowledge in China's remote west, where routine immunisation is relatively weak. Design Prospective pre–post (2006–2010) evaluation in project counties; retrospective comparison based on 2004 administrative data at baseline and surveyed post-intervention (2010) data in selected non-project counties. Setting Four project counties and one non-project county in each of four provinces. Participants 3390 children in project counties at baseline, and 3299 in project and 830 in non-project counties post-intervention; and 3279 caregivers at baseline, and 3389 in project and 830 in non-project counties post-intervention. Intervention Multicomponent inexpensive knowledge-strengthening and service-strengthening and innovative, multisectoral engagement. Data collection Standard 30-cluster household surveys of vaccine coverage and caregiver interviews pre-intervention and post-intervention in each project county. Similar surveys in one non-project county selected by local authorities in each province post-intervention. Administrative data on vaccination coverage in non-project counties at baseline. Primary outcome measures Changes in vaccine coverage between baseline and project completion (2010); comparative caregiver knowledge in all counties in 2010. Analysis Crude (χ2) analysis of changes and differences in vaccination coverage and related knowledge. Multiple logistic regression to assess associations with timely coverage. Results Timely coverage of four routine vaccines increased by 21% (p<0.001) and hepatitis B (HepB) birth dose by 35% (p<0.001) over baseline in project counties. Comparison with non-project counties revealed secular improvement in most provinces, except new vaccine coverage was mostly higher in project counties. Ethnicity, province, birthplace, vaccination site, dual-parental out-migration and parental knowledge had significant associations with coverage. Knowledge increased for all variables but one in project counties (highest p<0.05) and was substantially higher than in non-project counties (p<0.01). Conclusions Comprehensive but inexpensive strategies improved vaccination coverage and caretaker knowledge in western China. Establishing multisectoral leadership, involving the education sector and including immunisation in public-sector performance standards, are affordable and effective interventions. PMID:26966053

Project CARE: reducing wet weather overflows to improve beach water quality. Council Action in Respect of the Environment.

PubMed

Heijs, J; Wilkinson, D; Couriel, E

2002-01-01

The people who live in North Shore City (New Zealand) consider the beaches as their greatest asset. Following public outcry on frequent beach pollution caused by wet weather sewer overflows, Project CARE commenced in 1998 to plan the improvements to the city's separated wastewater and stormwater systems to protect the streams and beaches, particularly from a public health perspective. The investigation included building hydrological and hydraulic models to represent the wastewater and stormwater systems and a receiving waters model to simulate the impacts on the beaches. These models were later used to explore options for improvement. It was found that North Shore City has a very leaky wastewater system that is under capacity. The resulting wet weather overflows (12 per year on average) are the most important contributor to the problem although stormwater pollution alone is big enough to cause problems (at a smaller magnitude). A cost optimisation model (iterative process using performance/cost relationships) was then used to assist in identifying the optimal set of improvement works (storage, repair and increased capacity, wastewater treatment plant) to meet different performance targets and to cater for growth up to the year 2050. Cost Benefit analyses, looking at improvements in system performance and water quality, show diminishing returns for performance levels better than 2 overflows per year. The total costs that meet this target are estimated at almost NZ$300M (US$135M).

Using a mentoring approach to implement an inpatient glycemic control program in United States hospitals.

PubMed

Rushakoff, Robert J; Sullivan, Mary M; Seley, Jane Jeffrie; Sadhu, Archana; O'Malley, Cheryl W; Manchester, Carol; Peterson, Eric; Rogers, Kendall M

2014-09-01

establishing an inpatient glycemic control program is challenging, requires years of work, significant education and coordination of medical, nursing, dietary, and pharmacy staff, and support from administration and Performance Improvement departments. We undertook a 2 year quality improvement project assisting 10 medical centers (academic and community) across the US to implement inpatient glycemic control programs. the project was comprised of 3 interventions. (1) One day site visit with a faculty team (MD and CDE) to meet with key personnel, identify deficiencies and barriers to change, set site specific goals and develop strategies and timelines for performance improvement. (2) Three webinar follow-up sessions. (3) Web site for educational resources. Updates, challenges, and accomplishments for each site were reviewed at the time of each webinar and progress measured at the completion of the project with an evaluation questionnaire. as a result of our intervention, institutions revised and simplified formularies and insulin order sets (with CHO counting options); implemented glucometrics and CDE monitoring of inpatient glucoses (assisting providers with orders); added new protocols for DKA and perinatal treatment; and implemented nursing, physician and patient education initiatives. Changes were institution specific, fitting the local needs and cultures. As to the extent to which Institution׳s goals were satisfied: 2 reported "completely", 4 "mostly," 3 "partially," and 1 "marginally". Institutions continue to move toward fulfilling their goals. an individualized, structured, performance improvement approach with expert faculty mentors can help facilitate change in an institution dedicated to implementing an inpatient glycemic control program. Copyright © 2014 Elsevier Inc. All rights reserved.

Development and implementation of a performance improvement project in adult intensive care units: overview of the Improving Medicine Through Pathway Assessment of Critical Therapy in Hospital-Acquired Pneumonia (IMPACT-HAP) study.

PubMed

Mangino, Julie E; Peyrani, Paula; Ford, Kimbal D; Kett, Daniel H; Zervos, Marcus J; Welch, Verna L; Scerpella, Ernesto G; Ramirez, Julio A

2011-01-01

In 2005 the American Thoracic Society and Infectious Diseases Society of America (ATS/IDSA) published guidelines for managing hospital-acquired pneumonia (HAP), ventilator-associated pneumonia (VAP), and healthcare-associated pneumonia (HCAP). Although recommendations were evidence based, collective guidelines had not been validated in clinical practice and did not provide specific tools for local implementation. We initiated a performance improvement project designated Improving Medicine Through Pathway Assessment of Critical Therapy in Hospital-Acquired Pneumonia (IMPACT-HAP) at four academic centers in the United States. Our objectives were to develop and implement the project, and to assess compliance with quality indicators in adults admitted to intensive care units (ICUs) with HAP, VAP, or HCAP. The project was conducted in three phases over 18 consecutive months beginning 1 February 2006: 1) a three-month planning period for literature review to create the consensus pathway for managing nosocomial pneumonia in these ICUs, a data collection form, quality performance indicators, and internet-based repository; 2) a six-month implementation period for customizing ATS/IDSA guidelines into center-specific guidelines via educational forums; and 3) a nine-month post-implementation period for continuing education and data collection. Data from the first two phases were combined (pre-implementation period) and compared with data from the post-implementation period. We developed a consensus pathway based on ATS/IDSA guidelines and customized it at the local level to accommodate formulary and microbiologic considerations. We implemented multimodal educational activities to teach ICU staff about the guidelines and continued education throughout post-implementation. We registered 432 patients (pre- vs post-implementation, 274 vs 158). Diagnostic criteria for nosocomial pneumonia were more likely to be met during post-implementation (247/257 (96.1%) vs 150/151 (99.3%); P = 0.06). Similarly, empiric antibiotics were more likely to be compliant with ATS/IDSA guidelines during post-implementation (79/257 (30.7%) vs 66/151 (43.7%); P = 0.01), an effect that was sustained over quarterly intervals (P = 0.0008). Between-period differences in compliance with obtaining cultures and use of de-escalation were not statistically significant. Developing a multi-center performance improvement project to operationalize ATS/IDSA guidelines for HAP, VAP, and HCAP is feasible with local consensus pathway directives for implementation and with quality indicators for monitoring compliance with guidelines.

Health, Safety and Performance in High Altitude Observatories: A Sustainable Approach

NASA Astrophysics Data System (ADS)

Böcker, Michael; Vogt, Joachim; Christ, Oliver; Müller-Leonhardt, Alice

2009-09-01

The research project “Optimising Performance, Health and Safety in High Altitude Observatories” was initiated by ESO to establish an approach to promote the well-being of staff working at its high altitude observatories, and in particular at the Antiplano de Chajnantor. A survey by a questionnaire given to both workers and visitors was employed to assess the effects of working conditions at high altitude. Earlier articles have outlined the project and reported early results. The final results and conclusions are presented, together with a concept for sustainable development to improve the performance, health and safety at high altitude employing Critical Incident Stress Management.

Exploring factors affecting owners' trust of contractors in construction projects: a case of China.

PubMed

Tai, Shuangliang; Sun, Chengshuang; Zhang, Shoujian

2016-01-01

It has been found that a low level of trust among members of a construction project team leads to poor performance in China. Many researchers have described the challenges, consequently advocating partnering as an attractive approach for more valuable cooperation. Because substantial investments have been poured into construction projects since the year 2000, trust research will improve the performance of construction projects and will be meaningful to the Chinese construction industry. The purpose of this paper is to investigate the attributes affecting owners' trust of contractors, to understand the potential properties of these factors, and to rank the factors in order of importance. Twenty-four attributes are identified from a literature review. Supported by qualitative reviews, a questionnaire is conducted to obtain relevant data, and 168 valid responses are obtained for data analysis. Principal component analysis (PCA) is employed to find the factor structure of the identified trust attributes. By the method of PCA, the attributes are extracted into eight factors, including interaction history, information sharing and communication, contract and institution, relation-specific investment, reputation, integrity, competence, and opportunistic behaviour. The value and originality of this paper are embodied in using PCA to understand the various attribute groupings and to illuminate trust impact factors in the Chinese context. When they understand the critical factors affecting trust better, owners and contractors can devise more appropriate strategies to improve performance.

Instituting systems-based practice and practice-based learning and improvement: a curriculum of inquiry.

PubMed

Wilper, Andrew P; Smith, Curtis Scott; Weppner, William

2013-01-01

Background The Accreditation Council for Graduate Medical Education (ACGME) requires that training programs integrate system-based practice (SBP) and practice-based learning and improvement (PBLI) into internal medicine residency curricula. Context and setting We instituted a seminar series and year-long-mentored curriculum designed to engage internal medicine residents in these competencies. Methods Residents participate in a seminar series that includes assigned reading and structured discussion with faculty who assist in the development of quality improvement or research projects. Residents pursue projects over the remainder of the year. Monthly works in progress meetings, protected time for inquiry, and continued faculty mentorship guide the residents in their project development. Trainees present their work at hospital-wide grand rounds at the end of the academic year. We performed a survey of residents to assess their self-reported knowledge, attitudes and skills in SBP and PBLI. In addition, blinded faculty scored projects for appropriateness, impact, and feasibility. Outcomes We measured resident self-reported knowledge, attitudes, and skills at the end of the academic year. We found evidence that participants improved their understanding of the context in which they were practicing, and that their ability to engage in quality improvement projects increased. Blinded faculty reviewers favorably ranked the projects' feasibility, impact, and appropriateness. The 'Curriculum of Inquiry' generated 11 quality improvement and research projects during the study period. Barriers to the ongoing work include a limited supply of mentors and delays due to Institutional Review Board approval. Hospital leadership recognizes the importance of the curriculum, and our accreditation manager now cites our ongoing work. Conclusions A structured residency-based curriculum facilitates resident demonstration of SBP and practice-based learning and improvement. Residents gain knowledge and skills though this enterprise and hospitals gain access to trainees who help to solve ongoing problems and meet accreditation requirements.

The Impact of Early Design Phase Risk Identification Biases on Space System Project Performance

NASA Technical Reports Server (NTRS)

Reeves, John D., Jr.; Eveleigh, Tim; Holzer, Thomas; Sarkani, Shahryar

2012-01-01

Risk identification during the early design phases of complex systems is commonly implemented but often fails to result in the identification of events and circumstances that truly challenge project performance. Inefficiencies in cost and schedule estimation are usually held accountable for cost and schedule overruns, but the true root cause is often the realization of programmatic risks. A deeper understanding of frequent risk identification trends and biases pervasive during space system design and development is needed, for it would lead to improved execution of existing identification processes and methods.

Abstract - Cooperative Research and Development Agreement between Ames National Laboratory and National Energy Technology Laboratory AGMT-0609

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bryden, Mark; Tucker, David A.

The goal of this project is to develop a merged environment for simulation and analysis (MESA) at the National Energy Technology Laboratory’s (NETL) Hybrid Performance (Hyper) project laboratory. The MESA sensor lab developed as a component of this research will provide a development platform for investigating: 1) advanced control strategies, 2) testing and development of sensor hardware, 3) various modeling in-the-loop algorithms and 4) other advanced computational algorithms for improved plant performance using sensors, real-time models, and complex systems tools.

Facilitating cancer research using natural language processing of pathology reports.

PubMed

Xu, Hua; Anderson, Kristin; Grann, Victor R; Friedman, Carol

2004-01-01

Many ongoing clinical research projects, such as projects involving studies associated with cancer, involve manual capture of information in surgical pathology reports so that the information can be used to determine the eligibility of recruited patients for the study and to provide other information, such as cancer prognosis. Natural language processing (NLP) systems offer an alternative to automated coding, but pathology reports have certain features that are difficult for NLP systems. This paper describes how a preprocessor was integrated with an existing NLP system (MedLEE) in order to reduce modification to the NLP system and to improve performance. The work was done in conjunction with an ongoing clinical research project that assesses disparities and risks of developing breast cancer for minority women. An evaluation of the system was performed using manually coded data from the research project's database as a gold standard. The evaluation outcome showed that the extended NLP system had a sensitivity of 90.6% and a precision of 91.6%. Results indicated that this system performed satisfactorily for capturing information for the cancer research project.

Does Nursing Facility Use of Habilitation Therapy Improve Performance on Quality Measures?

PubMed

Fitzler, Sandra; Raia, Paul; Buckley, Fredrick O; Wang, Mei

2016-12-01

The purpose of the project, Centers for Medicare & Medicaid Services (CMS) Innovation study, was to evaluate the impact on 12 quality measures including 10 Minimum Data Set (MDS) publicly reported measures and 2 nursing home process measures using habilitation therapy techniques and a behavior team to manage dementia-related behaviors. A prospective design was used to assess the changes in the measures. A total of 30 Massachusetts nursing homes participated in the project over a 12-month period. Project participation required the creation of an interdisciplinary behavior team, habilitation therapy training, facility visit by the program coordinator, attendance at bimonthly support and sharing calls, and monthly collection of process measure data. Participating facilities showed improvement in 9 of the 12 reported measures. Findings indicate potential quality improvement in having nursing homes learn habilitation therapy techniques and know how to use the interdisciplinary team to manage problem behaviors. © The Author(s) 2016.

Lafayette Adult Reading Academy (LARA) and St. Elizabeth Hospital Employee Literacy Program. Final Performance Report.

ERIC Educational Resources Information Center

Lafayette School Corp., IN.

A two-pronged project model aimed to reduce the volume and increase the usefulness of health care materials and improve the literacy, verbal communication, and problem-solving skills of hospital employees. Regular meetings with hospital staff led project personnel to begin training with the cleaning staff in the areas of fire safety, back care,…

Skills-Based Residency Training in Alcohol Screening and Brief Intervention: Results from the Georgia-Texas "Improving Brief Intervention" Project

ERIC Educational Resources Information Center

Seale, J. Paul; Velasquez, Mary M.; Johnson, J. Aaron; Shellenberger, Sylvia; von Sternberg, Kirk; Dodrill, Carrie; Boltri, John M.; Takei, Roy; Clark, Denice; Grace, Daniel

2012-01-01

Alcohol screening and brief intervention (SBI) is recommended for all primary care patients but is underutilized. This project trained 111 residents and faculty in 8 family medicine residencies to conduct SBI and implement SBI protocols in residency clinics, then assessed changes in self-reported importance and confidence in performing SBI and…

"Knowing Is Not Enough; We Must Apply": Reflections on a Failed Action Learning Application

ERIC Educational Resources Information Center

Reese, Simon

2015-01-01

This paper reflects upon a sub-optimal action learning application with a strategic business re-design project. The objective of the project was to improve the long-term business performance of a subsidiary business and build the strategic plan. Action learning was introduced to aid the group in expanding their view of the real problems…

PSP, TSP, XP, CMMI...Eating the Alphabet Soup!

DTIC Science & Technology

2011-05-19

Operations and Reports, 1215 Jefferson Davis Highway, Suite 1204, Arlington VA 22202-4302. Respondents should be aware that notwithstanding any other...4 Q tit t Continuous process improvement Organizational Performance Management Causal Analysis and Resolution Level Focus Process Areas Requirements...Project Management process standardization Risk management Decision Analysis and Resolution Product Integration 2 M d R i t t anage Basic Project

Army Corps of Engineers Water Resource Projects: Authorization and Appropriations

DTIC Science & Technology

2010-09-29

Corps’ role in levee accreditation and improvements for the National Flood Insurance Program ( NFIP ). Responsibilities and Organization The Corps is...sponsors assume any rehabilitation cost for damage to an active project attributable to deficient maintenance. Corps Authorities and NFIP Levee...certification. The Corps currently has no general authority to perform NFIP -compliant data certifications using discretionary appropriations and is

Advanced Energy Retrofit Guide (AERG): Practical Ways to Improve Energy Performance; Healthcare Facilities (Book)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hendron, R.; Leach, M.; Bonnema, E.

The Advanced Energy Retrofit Guide for Healthcare Facilities is part of a series of retrofit guides commissioned by the U.S. Department of Energy. By presenting general project planning guidance as well as detailed descriptions and financial payback metrics for the most important and relevant energy efficiency measures (EEMs), the guides provide a practical roadmap for effectively planning and implementing performance improvements in existing buildings. The Advanced Energy Retrofit Guides (AERGs) are intended to address key segments of the U.S. commercial building stock: retail stores, office buildings, K-12 schools, grocery stores, and healthcare facilities. The guides' general project planning considerations aremore » applicable nationwide; the energy and cost savings estimates for recommended EEMs were developed based on energy simulations and cost estimates for an example hospital tailored to five distinct climate regions. These results can be extrapolated to other U.S. climate zones. Analysis is presented for individual EEMs, and for packages of recommended EEMs for two project types: existing building commissioning projects that apply low-cost and no-cost measures, and whole-building retrofits involving more capital-intensive measures.« less

Quantitative evaluation of three advanced laparoscopic viewing technologies: a stereo endoscope, an image projection display, and a TFT display.

PubMed

Wentink, M; Jakimowicz, J J; Vos, L M; Meijer, D W; Wieringa, P A

2002-08-01

Compared to open surgery, minimally invasive surgery (MIS) relies heavily on advanced technology, such as endoscopic viewing systems and innovative instruments. The aim of the study was to objectively compare three technologically advanced laparoscopic viewing systems with the standard viewing system currently used in most Dutch hospitals. We evaluated the following advanced laparoscopic viewing systems: a Thin Film Transistor (TFT) display, a stereo endoscope, and an image projection display. The standard viewing system was comprised of a monocular endoscope and a high-resolution monitor. Task completion time served as the measure of performance. Eight surgeons with laparoscopic experience participated in the experiment. The average task time was significantly greater (p <0.05) with the stereo viewing system than with the standard viewing system. The average task times with the TFT display and the image projection display did not differ significantly from the standard viewing system. Although the stereo viewing system promises improved depth perception and the TFT and image projection displays are supposed to improve hand-eye coordination, none of these systems provided better task performance than the standard viewing system in this pelvi-trainer experiment.

Rapid Deployment of Optimal Control for Building HVAC Systems using Innovative Software Tools and a Hybrid Heuristic/Model Based Control Approach

DTIC Science & Technology

2017-03-21

Energy and Water Projects March 21, 2017 REPORT DOCUMENTATION PAGE Form Approved OMB No. 0704-0188 Public reporting burden for this collection of...included reduced system energy use and cost as well as improved performance driven by autonomous commissioning and optimized system control. In the end...improve system performance and reduce energy use and cost. However, implementing these solutions into the extremely heterogeneous and often

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kisner, Roger A; Melin, Alexander M; Burress, Timothy A

The overall project objective is to demonstrate improved reliability and increased performance made possible by deeply embedding instrumentation and controls (I&C) in nuclear power plant components. The project is employing a highly instrumented canned rotor, magnetic bearing, fluoride salt pump as its I&C technology demonstration vehicle. The project s focus is not primarily on pump design, but instead is on methods to deeply embed I&C within a pump system. However, because the I&C is intimately part of the basic millisecond-by-millisecond functioning of the pump, the I&C design cannot proceed in isolation from the other aspects of the pump. The pumpmore » will not function if the characteristics of the I&C are not embedded within the design because the I&C enables performance of the basic function rather than merely monitoring quasi-stable performance. Traditionally, I&C has been incorporated in nuclear power plant (NPP) components after their design is nearly complete; adequate performance was obtained through over-design. This report describes the progress and status of the project and provides a conceptual design overview for the embedded I&C pump.« less

LLVM Infrastructure and Tools Project Summary

DOE Office of Scientific and Technical Information (OSTI.GOV)

McCormick, Patrick Sean

2017-11-06

This project works with the open source LLVM Compiler Infrastructure (http://llvm.org) to provide tools and capabilities that address needs and challenges faced by ECP community (applications, libraries, and other components of the software stack). Our focus is on providing a more productive development environment that enables (i) improved compilation times and code generation for parallelism, (ii) additional features/capabilities within the design and implementations of LLVM components for improved platform/performance portability and (iii) improved aspects related to composition of the underlying implementation details of the programming environment, capturing resource utilization, overheads, etc. -- including runtime systems that are often not easilymore » addressed by application and library developers.« less

A Factor Analysis on Teamwork Performance: An Empirical Study of Inter-Instituted Collaboration

ERIC Educational Resources Information Center

Wu, Mingchang; Chen, Ya-Hsueh

2014-01-01

Problem Statement: Inter-instituted collaboration has attracted broad attention for educational quality improvement in the last decade. The team performance of these innovative team projects received foremost attention, particularly with knowledge-sharing, emotional intelligence, and team conflicts. Purpose of Study: The purpose of the study was…

Entrepreneurship Projects and Pupils' Academic Performance: A Study of Norwegian Secondary Schools

ERIC Educational Resources Information Center

Johansen, Vegard; Schanke, Tuva

2014-01-01

Many European countries have launched policy strategies for entrepreneurship education in the past decade. The result is a significant increase of entrepreneurship education in schools and higher education institutions in Europe. Entrepreneurship education is supposed to promote entrepreneurial abilities and improve academic performance. This…

Using Lean Six Sigma Methodology to Improve a Mass Immunizations Process at the United States Naval Academy.

PubMed

Ha, Chrysanthy; McCoy, Donald A; Taylor, Christopher B; Kirk, Kayla D; Fry, Robert S; Modi, Jitendrakumar R

2016-06-01

Lean Six Sigma (LSS) is a process improvement methodology developed in the manufacturing industry to increase process efficiency while maintaining product quality. The efficacy of LSS application to the health care setting has not been adequately studied. This article presents a quality improvement project at the U.S. Naval Academy that uses LSS to improve the mass immunizations process for Midshipmen during in-processing. The process was standardized to give all vaccinations at one station instead of giving a different vaccination at each station. After project implementation, the average immunizations lead time decreased by 79% and staffing decreased by 10%. The process was shown to be in control with a capability index of 1.18 and performance index of 1.10, resulting in a defect rate of 0.04%. This project demonstrates that the LSS methodology can be applied successfully to the health care setting to make sustainable process improvements if used correctly and completely. Reprint & Copyright © 2016 Association of Military Surgeons of the U.S.

The sweet-home project: audio technology in smart homes to improve well-being and reliance.

PubMed

Vacher, Michel; Istrate, Dan; Portet, François; Joubert, Thierry; Chevalier, Thierry; Smidtas, Serge; Meillon, Brigitte; Lecouteux, Benjamin; Sehili, Mohamed; Chahuara, Pedro; Méniard, Sylvain

2011-01-01

The Sweet-Home project aims at providing audio-based interaction technology that lets the user have full control over their home environment, at detecting distress situations and at easing the social inclusion of the elderly and frail population. This paper presents an overview of the project focusing on the multimodal sound corpus acquisition and labelling and on the investigated techniques for speech and sound recognition. The user study and the recognition performances show the interest of this audio technology.

New Whole-House Solutions Case Study: Northwest Energy Efficient Manufactured Housing Program High-Performance Test Homes - Pacific Northwest

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

2015-05-01

This project represents the third phase of a multi-year effort to develop and bring to market a High Performance Manufactured Home (HPMH). In this project, the Northwest Energy Efficient Manufactured Housing Program worked with Building America Partnership for Improved Residential Construction and Bonneville Power Administration to help four factory homebuilders build prototype zero energy ready manufactured homes, resulting in what is expected to be a 30% savings relative to the Building America Benchmark. (The actual % savings varies depending on choice of heating equipment and climate zone). Previous phases of this project created a HPMH specification and prototyped individual measuresmore » from the package to obtain engineering approvals and develop preliminary factory construction processes. This case study describes the project team's work during 2014 to build prototype homes to the HPMH specifications and to monitor the homes for energy performance and durability. Monitoring is expected to continue into 2016.« less

The impact of contracting-out on health system performance: a conceptual framework.

PubMed

Liu, Xingzhu; Hotchkiss, David R; Bose, Sujata

2007-07-01

Despite the increased popularity of contracting-out of health services in developing countries, its effectiveness on overall health system performance is not yet conclusive. Except for substantial evidence of contracting-out's positive effect on access to health services and some evidence on improved equity in access, there is little evidence of contracting-out's impact on quality and efficiency. Most studies on the subject evaluate specific contracting-out projects against narrowly specified project objectives, not against more broadly defined health system goals. For this reason, conclusions of positive effects pertaining to project level may not hold at system level. This paper presents a conceptual framework that is expected to facilitate comprehensive, rigorous, and standardized evaluation of contracting-out at health system level. Specifically, this framework supports: full and standardized description of contracting-out interventions, study of the determinants of effectiveness, examination of provider and purchaser responses, assessment of the impact of contracting-out on all dimensions of health system performance, and cross-project analyses.

WISE: Automated support for software project management and measurement. M.S. Thesis

NASA Technical Reports Server (NTRS)

Ramakrishnan, Sudhakar

1995-01-01

One important aspect of software development and IV&V is measurement. Unless a software development effort is measured in some way, it is difficult to judge the effectiveness of current efforts and predict future performances. Collection of metrics and adherence to a process are difficult tasks in a software project. Change activity is a powerful indicator of project status. Automated systems that can handle change requests, issues, and other process documents provide an excellent platform for tracking the status of the project. A World Wide Web based architecture is developed for (a) making metrics collection an implicit part of the software process, (b) providing metric analysis dynamically, (c) supporting automated tools that can complement current practices of in-process improvement, and (d) overcoming geographical barrier. An operational system (WISE) instantiates this architecture allowing for the improvement of software process in a realistic environment. The tool tracks issues in software development process, provides informal communication between the users with different roles, supports to-do lists (TDL), and helps in software process improvement. WISE minimizes the time devoted to metrics collection, analysis, and captures software change data. Automated tools like WISE focus on understanding and managing the software process. The goal is improvement through measurement.

Energy Efficiency Measures to Incorporate into Remodeling Projects

DOE Office of Scientific and Technical Information (OSTI.GOV)

Liaukus, C.

2014-12-01

Energy improvements in a home are often approached as one concerted effort, beginning with a simple walk-through assessment or more in-depth energy audit and followed by the installation of recommended energy measures. While this approach allows for systems thinking to guide the efforts, comprehensive energy improvements of this nature are undertaken by a relatively small number of U.S. households compared to piecemeal remodeling efforts. In this report, the U.S Department of Energy Building America Retrofit Alliance research team examines the improvement of a home’s energy performance in an opportunistic way by examining what can be done to incorporate energy efficiencymore » measures into general remodeling work and home repair projects. This allows for energy efficiency upgrades to occur at the same time as remodeling proejcts. There are challenges to this approach, not the least of which being that the work will take place over time in potentially many separate projects. The opportunity to improve a home’s energy efficiency at one time expands or contracts with the scope of the remodel. As such, guidance on how to do each piece thoughtfully and with consideration for potential future projects, is critical.« less

Behavior-based safety on construction sites: a case study.

PubMed

Choudhry, Rafiq M

2014-09-01

This work presents the results of a case study and describes an important area within the field of construction safety management, namely behavior-based safety (BBS). This paper adopts and develops a management approach for safety improvements in construction site environments. A rigorous behavioral safety system and its intervention program was implemented and deployed on target construction sites. After taking a few weeks of safety behavior measurements, the project management team implemented the designed intervention and measurements were taken. Goal-setting sessions were arranged on-site with workers' participation to set realistic and attainable targets of performance. Safety performance measurements continued and the levels of performance and the targets were presented on feedback charts. Supervisors were asked to give workers recognition and praise when they acted safely or improved critical behaviors. Observers were requested to have discussions with workers, visit the site, distribute training materials to workers, and provide feedback to crews and display charts. They were required to talk to operatives in the presence of line managers. It was necessary to develop awareness and understanding of what was being measured. In the process, operatives learned how to act safely when conducting site tasks using the designed checklists. Current weekly scores were discussed in the weekly safety meetings and other operational site meetings with emphasis on how to achieve set targets. The reliability of the safety performance measures taken by the company's observers was monitored. A clear increase in safety performance level was achieved across all categories: personal protective equipment; housekeeping; access to heights; plant and equipment, and scaffolding. The research reveals that scores of safety performance at one project improved from 86% (at the end of 3rd week) to 92.9% during the 9th week. The results of intervention demonstrated large decreases in unsafe behaviors and significant increases in safe behaviors. The results of this case study showed that an approach based on goal setting, feedback, and an effective measure of safety behavior if properly applied by committed management, can improve safety performance significantly in construction site environments. The results proved that the BBS management technique can be applied to any country's culture, showing that it would be a good approach for improving the safety of front-line workers and that it has industry wide application for ongoing construction projects. Copyright © 2014 Elsevier Ltd. All rights reserved.

INFLATE: INFlate Landing Apparatus Technology

NASA Astrophysics Data System (ADS)

Koryanov, V. V. K.; Da-Poian, V. D. P.

2018-02-01

Our project, named INFLATE (INFlatable Landing Apparatus Technology), aims at reducing space landing risks and constraints and so optimizing space missions (reducing cost, mass, and risk and in the same time improving performance).

A Successful ED Fall Risk Program Using the KINDER 1 Fall RiskAssessment Tool.

PubMed

Townsend, Ann B; Valle-Ortiz, Marisol; Sansweet, Tracy

2016-11-01

Emergency nurses did not perform falls risk assessments routinely on our ED patients; the instrument used was aimed at inpatients. We identified a need to revise fall assessment practices specific to our emergency department. The purpose of the performance improvement project was to reduce ED falls and evaluate the use of an ED-specific fall risk tool, the KINDER 1 Fall Risk Assessment. The plan was to establish fall risk assessment practices at point of ED entry and to decrease total falls. We retrospectively reviewed ED fall data for each quarter of 2013, which included risk assessments scores, the total number of falls, and the circumstances of each fall. Using Kotter's framework to guide a successful change process, we implemented the KINDER 1 to assess fall risk. During the first 4 weeks of the project, 937 patients (27%) were identified as high risk for falls using the KINDER 1. During the subsequent 3 quarters, the total number of falls decreased; reported falls without injuries dropped from 0.21 to 0.07 per 1000 patients, and falls with injuries were reduced from 0.21 to 0.0 per 1000 patients. The results of this project represented a valuable step toward achieving our goal to keep ED patients safe from injuries as a result of falls. The findings add to the body of nursing knowledge on the application of clinical-based performance improvement projects to improve patient outcomes and to provide data on the use of the KINDER 1 tool, which has not been extensively tested. Copyright © 2016 Emergency Nurses Association. Published by Elsevier Inc. All rights reserved.

An Analysis of Rocket Propulsion Testing Costs

NASA Technical Reports Server (NTRS)

Ramirez-Pagan, Carmen P.; Rahman, Shamim A.

2009-01-01

The primary mission at NASA Stennis Space Center (SSC) is rocket propulsion testing. Such testing is generally performed within two arenas: (1) Production testing for certification and acceptance, and (2) Developmental testing for prototype or experimental purposes. The customer base consists of NASA programs, DOD programs, and commercial programs. Resources in place to perform on-site testing include both civil servants and contractor personnel, hardware and software including data acquisition and control, and 6 test stands with a total of 14 test positions/cells. For several business reasons there is the need to augment understanding of the test costs for all the various types of test campaigns. Historical propulsion test data was evaluated and analyzed in many different ways with the intent to find any correlation or statistics that could help produce more reliable and accurate cost estimates and projections. The analytical efforts included timeline trends, statistical curve fitting, average cost per test, cost per test second, test cost timeline, and test cost envelopes. Further, the analytical effort includes examining the test cost from the perspective of thrust level and test article characteristics. Some of the analytical approaches did not produce evidence strong enough for further analysis. Some other analytical approaches yield promising results and are candidates for further development and focused study. Information was organized for into its elements: a Project Profile, Test Cost Timeline, and Cost Envelope. The Project Profile is a snap shot of the project life cycle on a timeline fashion, which includes various statistical analyses. The Test Cost Timeline shows the cumulative average test cost, for each project, at each month where there was test activity. The Test Cost Envelope shows a range of cost for a given number of test(s). The supporting information upon which this study was performed came from diverse sources and thus it was necessary to build several intermediate databases in order to understand, validate, and manipulate data. These intermediate databases (validated historical account of schedule, test activity, and cost) by themselves are of great value and utility. For example, for the Project Profile, we were able to merged schedule, cost, and test activity. This kind of historical account conveys important information about sequence of events, lead time, and opportunities for improvement in future propulsion test projects. The Product Requirement Document (PRD) file is a collection of data extracted from each project PRD (technical characteristics, test requirements, and projection of cost, schedule, and test activity). This information could help expedite the development of future PRD (or equivalent document) on similar projects, and could also, when compared to the actual results, help improve projections around cost and schedule. Also, this file can be sorted by the parameter of interest to perform a visual review of potential common themes or trends. The process of searching, collecting, and validating propulsion test data encountered a lot of difficulties which then led to a set of recommendations for improvement in order to facilitate future data gathering and analysis.

75 FR 80786 - Solicitation of Applications for the Federal-State Marketing Improvement Program (FSMIP)

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-23

... funds a wide range of applied research projects that address barriers, challenges, and opportunities in... explore new market opportunities for U.S. food and agricultural products and to encourage research and... encourage research and innovation aimed at improving the efficiency and performance of the U.S. marketing...

77 FR 6055 - Notice of Funds Availability (NOFA) Inviting Applications for the Federal-State Marketing...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-02-07

... funds a wide range of applied research projects that address barriers, challenges, and opportunities in... agricultural products and to encourage research and innovation aimed at improving the efficiency and... and to encourage research and innovation aimed at improving the efficiency and performance of the U.S...

Advanced Information Processing. Volume II. Instructor's Materials. Curriculum Improvement Project. Region II.

ERIC Educational Resources Information Center

Stanford, Linda

This course curriculum is intended for use by community college insructors and administrators in implementing an advanced information processing course. It builds on the skills developed in the previous information processing course but goes one step further by requiring students to perform in a simulated office environment and improve their…

Learning from Consistently High Performing and Improving Schools for English Language Learners in Boston Public Schools

ERIC Educational Resources Information Center

Tung, Rosann; Diez, Virginia; Gagnon, Laurie; Uriarte, Miren; Stazesky, Pamela

2011-01-01

This study is part of a collaborative project entitled "Identifying Success in Schools and Programs for English Language Learners in Boston Public Schools". The companion to this report, entitled "Improving Educational Outcomes of English Language Learners in Schools and Programs in Boston Public Schools", provides a…

Evaluate the contribution of the mixture components on the longevity and performance of FC-5.

DOT National Transportation Integrated Search

2014-05-01

The focus of the project was to evaluate how to improve the longevity of FDOTs FC-5 mixtures. In particular, what FC-5 mixture : components have the greatest impact on improving the cracking and durability of the FC-5 mixture. The data mining of F...

A Study of Leadership and Continuous Improvement at Leadership Preparatory Academy

ERIC Educational Resources Information Center

Medina Araujo, Jacqueline

2013-01-01

This capstone project examines how an elementary school principal and her leadership team transformed Leadership Prep Academy in Capital City into a collaborative, high performing community school. This five-year process of continuous improvement involved engaging students, staff, parents, and members of the community in developing a culture of…

Performance of a system of reservoirs on futuristic front

NASA Astrophysics Data System (ADS)

Saha, Satabdi; Roy, Debasri; Mazumdar, Asis

2017-10-01

Application of simulation model HEC-5 to analyze the performance of the DVC Reservoir System (a multipurpose system with a network of five reservoirs and one barrage) on the river Damodar in Eastern India in meeting projected future demand as well as controlling flood for synthetically generated future scenario is addressed here with a view to develop an appropriate strategy for its operation. Thomas-Fiering model (based on Markov autoregressive model) has been adopted for generation of synthetic scenario (monthly streamflow series) and subsequently downscaling of modeled monthly streamflow to daily values was carried out. The performance of the system (analysed on seasonal basis) in terms of `Performance Indices' (viz., both quantity based reliability and time based reliability, mean daily deficit, average failure period, resilience and maximum vulnerability indices) for the projected scenario with enhanced demand turned out to be poor compared to that for historical scenario. However, judicious adoption of resource enhancement (marginal reallocation of reservoir storage capacity) and demand management strategy (curtailment of projected high water requirements and trading off between demands) was found to be a viable option for improvement of the performance of the reservoir system appreciably [improvement being (1-51 %), (2-35 %), (16-96 %), (25-50 %), (8-36 %) and (12-30 %) for the indices viz., quantity based reliability, time based reliability, mean daily deficit, average failure period, resilience and maximum vulnerability, respectively] compared to that with normal storage and projected demand. Again, 100 % reliability for flood control for current as well as future synthetically generated scenarios was noted. The results from the study would assist concerned authority in successful operation of reservoirs in the context of growing demand and dwindling resource.

WWC Quick Review of the Report "The Effect of Performance-Pay in Little Rock, Arkansas on Student Achievement"

ERIC Educational Resources Information Center

What Works Clearinghouse, 2008

2008-01-01

This review examined a study designed to evaluate whether the Achievement Challenge Pilot Project, a performance-pay program for teachers, improved the academic achievement of elementary school students. Study authors reported higher student test score gains for students in schools that implemented the performance- pay program than for students in…

Investigation of contrast-enhanced subtracted breast CT images with MAP-EM based on projection-based weighting imaging.

PubMed

Zhou, Zhengdong; Guan, Shaolin; Xin, Runchao; Li, Jianbo

2018-06-01

Contrast-enhanced subtracted breast computer tomography (CESBCT) images acquired using energy-resolved photon counting detector can be helpful to enhance the visibility of breast tumors. In such technology, one challenge is the limited number of photons in each energy bin, thereby possibly leading to high noise in separate images from each energy bin, the projection-based weighted image, and the subtracted image. In conventional low-dose CT imaging, iterative image reconstruction provides a superior signal-to-noise compared with the filtered back projection (FBP) algorithm. In this paper, maximum a posteriori expectation maximization (MAP-EM) based on projection-based weighting imaging for reconstruction of CESBCT images acquired using an energy-resolving photon counting detector is proposed, and its performance was investigated in terms of contrast-to-noise ratio (CNR). The simulation study shows that MAP-EM based on projection-based weighting imaging can improve the CNR in CESBCT images by 117.7%-121.2% compared with FBP based on projection-based weighting imaging method. When compared with the energy-integrating imaging that uses the MAP-EM algorithm, projection-based weighting imaging that uses the MAP-EM algorithm can improve the CNR of CESBCT images by 10.5%-13.3%. In conclusion, MAP-EM based on projection-based weighting imaging shows significant improvement the CNR of the CESBCT image compared with FBP based on projection-based weighting imaging, and MAP-EM based on projection-based weighting imaging outperforms MAP-EM based on energy-integrating imaging for CESBCT imaging.

Early Engagement of Safety and Mission Assurance Expertise Using Systems Engineering Tools: A Risk-Based Approach to Early Identification of Safety and Assurance Requirements

NASA Technical Reports Server (NTRS)

Darpel, Scott; Beckman, Sean

2016-01-01

Decades of systems engineering practice have demonstrated that the earlier the identification of requirements occurs, the lower the chance that costly redesigns will needed later in the project life cycle. A better understanding of all requirements can also improve the likelihood of a design's success. Significant effort has been put into developing tools and practices that facilitate requirements determination, including those that are part of the model-based systems engineering (MBSE) paradigm. These efforts have yielded improvements in requirements definition, but have thus far focused on a design's performance needs. The identification of safety & mission assurance (S&MA) related requirements, in comparison, can occur after preliminary designs are already established, yielding forced redesigns. Engaging S&MA expertise at an earlier stage, facilitated by the use of MBSE tools, and focused on actual project risk, can yield the same type of design life cycle improvements that have been realized in technical and performance requirements.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Agalgaonkar, Yashodhan P.; Hammerstrom, Donald J.

The Pacific Northwest Smart Grid Demonstration (PNWSGD) was a smart grid technology performance evaluation project that included multiple U.S. states and cooperation from multiple electric utilities in the northwest region. One of the local objectives for the project was to achieve improved distribution system reliability. Toward this end, some PNWSGD utilities automated their distribution systems, including the application of fault detection, isolation, and restoration and advanced metering infrastructure. In light of this investment, a major challenge was to establish a correlation between implementation of these smart grid technologies and actual improvements of distribution system reliability. This paper proposes using Welch’smore » t-test to objectively determine and quantify whether distribution system reliability is improving over time. The proposed methodology is generic, and it can be implemented by any utility after calculation of the standard reliability indices. The effectiveness of the proposed hypothesis testing approach is demonstrated through comprehensive practical results. It is believed that wider adoption of the proposed approach can help utilities to evaluate a realistic long-term performance of smart grid technologies.« less

NASA Exercise Physiology and Countermeasures Project Overview

NASA Technical Reports Server (NTRS)

Loerch, Linda; Ploutz-Snyder, Lori

2009-01-01

Efficient exercise countermeasures are necessary to offset or minimize spaceflight-induced deconditioning and to maximize crew performance of mission tasks. These countermeasure protocols should use the fewest crew and vehicle resources. NASA s Exercise Physiology and Countermeasures (ExPC) Project works to identify, collect, interpret, and summarize evidence that results in effective exercise countermeasure protocols which protect crew health and performance during International Space Station (ISS) and future exploration-class missions. The ExPC and NASA s Human Research Program are sponsoring multiple studies to evaluate and improve the efficacy of spaceflight exercise countermeasures. First, the Project will measure maximal aerobic capacity (VO2max) during cycle ergometry before, during, and after ISS missions. Second, the Project is sponsoring an evaluation of a new prototype harness that offers improved comfort and increased loading during treadmill operations. Third, the Functional Tasks Test protocol will map performance of anticipated lunar mission tasks with physiologic systems before and after short and long-duration spaceflight, to target system contributions and the tailoring of exercise protocols to maximize performance. In addition to these studies that are actively enrolling crewmember participants, the ExPC is planning new studies that include an evaluation of a higher-intensity/lower-volume exercise countermeasure protocol aboard the ISS using the Advanced Resistive Exercise Device and second-generation treadmill, studies that evaluate bone loading during spaceflight exercise, and ground-based studies that focus on fitness for duty standards required to complete lunar mission tasks and for which exercise protocols need to protect. Summaries of these current and future studies and strategies will be provided to international colleagues for knowledge sharing and possible collaboration.

Solar Technology Validation Project - USS Data, LLC: Cooperative Research and Development Final Report, CRADA Number CRD-09-367-04

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wilcox, S.

2013-08-01

Under this Agreement, NREL will work with Participant to improve concentrating solar power system performance characterizations. This work includes, but is not limited to, research and development of methods for acquiring renewable resource characterization information using site-specific measurements of solar radiation and meteorological conditions; collecting system performance data; and developing tools for improving the design, installation, operation, and maintenance of solar energy conversion systems. This work will be conducted at NREL and Participant facilities.

Solar Technology Validation Project - RES Americas: Cooperative Research and Development Final Report, CRADA Number CRD-09-367-11

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wilcox, S.

Under this Agreement, NREL will work with Participant to improve concentrating solar power system performance characterizations. This work includes, but is not limited to, research and development of methods for acquiring renewable resource characterization information using site-specific measurements of solar radiation and meteorological conditions; collecting system performance data; and developing tools for improving the design, installation, operation, and maintenance of solar energy conversion systems. This work will be conducted at NREL and Participant facilities.

LOWER COST METHODS FOR IMPROVED OIL RECOVERY (IOR) VIA SURFACTANT FLOODING

DOE Office of Scientific and Technical Information (OSTI.GOV)

William A. Goddard III; Yongchun Tang; Patrick Shuler

2004-09-01

This report provides a summary of the work performed in this 3-year project sponsored by DOE. The overall objective of this project is to identify new, potentially more cost-effective surfactant formulations for improved oil recovery (IOR). The general approach is to use an integrated experimental and computational chemistry effort to improve our understanding of the link between surfactant structure and performance, and from this knowledge, develop improved IOR surfactant formulations. Accomplishments for the project include: (1) completion of a literature review to assemble current and new surfactant IOR ideas, (2) Development of new atomistic-level MD (molecular dynamic) modeling methodologies tomore » calculate IFT (interfacial tension) rigorously from first principles, (3) exploration of less computationally intensive mesoscale methods to estimate IFT, Quantitative Structure Property Relationship (QSPR), and cohesive energy density (CED) calculations, (4) experiments to screen many surfactant structures for desirable low IFT and solid adsorption behavior, and (5) further experimental characterization of the more promising new candidate formulations (based on alkyl polyglycosides (APG) and alkyl propoxy sulfate surfactants). Important findings from this project include: (1) the IFT between two pure substances may be calculated quantitatively from fundamental principles using Molecular Dynamics, the same approach can provide qualitative results for ternary systems containing a surfactant, (2) low concentrations of alkyl polyglycoside surfactants have potential for IOR (Improved Oil Recovery) applications from a technical standpoint (if formulated properly with a cosurfactant, they can create a low IFT at low concentration) and also are viable economically as they are available commercially, and (3) the alkylpropoxy sulfate surfactants have promising IFT performance also, plus these surfactants can have high optimal salinity and so may be attractive for use in higher salinity reservoirs. Alkylpropoxy sulfate surfactants are not yet available as large volume commercial products. The results presented herein can provide the needed industrial impetus for extending application (alkyl polyglycoside) or scaling up (alkylpropoxy sulfates) of these two promising surfactants for enhanced oil recovery. Furthermore, the advanced simulations tools presented here can be used to continue to uncover new types of surfactants with promising properties such as inherent low IFT and biodegradability.« less

Cormack Research Project: Glasgow University

NASA Technical Reports Server (NTRS)

Skinner, Susan; Ryan, James M.

1998-01-01

The aim of this project was to investigate and improve upon existing methods of analysing data from COMITEL on the Gamma Ray Observatory for neutrons emitted during solar flares. In particular, a strategy for placing confidence intervals on neutron energy distributions, due to uncertainties on the response matrix has been developed. We have also been able to demonstrate the superior performance of one of a range of possible statistical regularization strategies. A method of generating likely models of neutron energy distributions has also been developed as a tool to this end. The project involved solving an inverse problem with noise being added to the data in various ways. To achieve this pre-existing C code was used to run Fortran subroutines which performed statistical regularization on the data.

Active Conceptual Modeling of Learning Workshop 10-12 May 2006

DTIC Science & Technology

2007-03-01

digital libraries. This project is working in partnership with the health portal for the Healthcare Ministry in Denmark and with the natural...also the principal investigator for an NSF-funded Digital Government project seeking to improve indexing and retrieval performance in domain-specific...solutions. It is being used in governmental, environmental, military, real-estate, health and many more applications. Each field faces common tasks of

A Project to Demonstrate Incremental Improvements in a K-12 Career Education Program through an Exemplary Model. Final Financial Status and Performance Report.

ERIC Educational Resources Information Center

Northwestern Tri-County Intermediate Unit 5, Edinboro, PA.

A project was conducted based on the following three objectives: (1) demonstrate a regional plan for the implementation of an open entry-exit (flexible) career development program encompassing career awareness, career exploration, and career preparation; (2) expose each student to a range of career clusters within the context of his educational…

Summary of Technical Operations, 1991

DTIC Science & Technology

1992-01-01

exploit commonality. The project is using the Feature-Oriented Domain Analysis ( FODA ) method, developed by the project in 1990, to perform this...the development of new movement control software. The analysis will also serve as a means of improving the FODA method. The results of this analysis ...STARS environment. The NASA Program Office has officially decided to expand the use of Rate Monotonic Analysis (RMA), which was originally isolated to

State Incentive Grants: Language Development Support Systems; Intensive Second Language Development for CAR Schools; Curriculum Development Project, 1987-88. OREA Evaluation Report.

ERIC Educational Resources Information Center

Berney, Tomi D.; Friedman, Grace Ibanez

Three New York City public school projects funded by the New York State Education Department's Bureau of Bilingual Education had the common goal of improving the quality of instruction in schools that the state's Comprehensive Assessment Report (CAR) had designated as needing special assistance for raising low student performance levels. The…

Validation of Rehabilitation Training Programs for Older Drivers

DOT National Transportation Integrated Search

2013-04-01

This project studied the effectiveness of four interventions designed to bolster safe performance among healthy older : drivers: (1) Classroom driver education with supplemental behind-the-wheel instruction; (2) Computer-based exercises : to improve ...

Performance measure that indicates geometry sufficiency of state highways : volume II -- clear zones and cross-section information extraction.

DOT National Transportation Integrated Search

2015-03-01

Evaluationmethod employedforthe proposed corridor projects by IndianaDepartment of Transportation(INDOT) considerroad : geometry improvements by a generalized categorization. A newmethod which consi...

78 FR 9917 - The President's Management Advisory Board (PMAB); Notification of Upcoming Public Advisory Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-12

...) portfolio and project management; Senior Executive Service (SES) leadership development and SES performance... effective strategies for the implementation of best business practices to improve Federal Government...

LANSCE: Los Alamos Neutron Science Center

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kippen, Karen Elizabeth

The principle goals of this project is to increase flux and improve resolution for neutron energies above 1 keV for nuclear physics experiments; and preserve current strong performance at thermal energies for material science.

Assessing students' performance in software requirements engineering education using scoring rubrics

NASA Astrophysics Data System (ADS)

Mkpojiogu, Emmanuel O. C.; Hussain, Azham

2017-10-01

The study investigates how helpful the use of scoring rubrics is, in the performance assessment of software requirements engineering students and whether its use can lead to students' performance improvement in the development of software requirements artifacts and models. Scoring rubrics were used by two instructors to assess the cognitive performance of a student in the design and development of software requirements artifacts. The study results indicate that the use of scoring rubrics is very helpful in objectively assessing the performance of software requirements or software engineering students. Furthermore, the results revealed that the use of scoring rubrics can also produce a good achievement assessments direction showing whether a student is either improving or not in a repeated or iterative assessment. In a nutshell, its use leads to the performance improvement of students. The results provided some insights for further investigation and will be beneficial to researchers, requirements engineers, system designers, developers and project managers.

NASA HPCC Technology for Aerospace Analysis and Design

NASA Technical Reports Server (NTRS)

Schulbach, Catherine H.

1999-01-01

The Computational Aerosciences (CAS) Project is part of NASA's High Performance Computing and Communications Program. Its primary goal is to accelerate the availability of high-performance computing technology to the US aerospace community-thus providing the US aerospace community with key tools necessary to reduce design cycle times and increase fidelity in order to improve safety, efficiency and capability of future aerospace vehicles. A complementary goal is to hasten the emergence of a viable commercial market within the aerospace community for the advantage of the domestic computer hardware and software industry. The CAS Project selects representative aerospace problems (especially design) and uses them to focus efforts on advancing aerospace algorithms and applications, systems software, and computing machinery to demonstrate vast improvements in system performance and capability over the life of the program. Recent demonstrations have served to assess the benefits of possible performance improvements while reducing the risk of adopting high-performance computing technology. This talk will discuss past accomplishments in providing technology to the aerospace community, present efforts, and future goals. For example, the times to do full combustor and compressor simulations (of aircraft engines) have been reduced by factors of 320:1 and 400:1 respectively. While this has enabled new capabilities in engine simulation, the goal of an overnight, dynamic, multi-disciplinary, 3-dimensional simulation of an aircraft engine is still years away and will require new generations of high-end technology.

Improving Oral Performance through Interactions Flashcards

ERIC Educational Resources Information Center

Urquijo, Jasson

2012-01-01

This paper describes an action research project that addressed the issue of low oral performance in English among third grade learners at a public girls' school in Bogota, Colombia. The issue was identified via content analysis of ten field logs compiled over the third and fourth quarter of the second semester, 2010. To address the problem of…

Learning in the Laboratory: How Group Assignments Affect Motivation and Performance

ERIC Educational Resources Information Center

Belanger, John R.

2016-01-01

Team projects can optimize educational resources in a laboratory, but also create the potential for social loafing. Allowing students to choose their own groups could increase their motivation to learn and improve academic performance. To test this hypothesis, final grades and feedback from students were compared for the same course in two…

Assessing Vocal Performances Using Analytical Assessment: A Case Study

ERIC Educational Resources Information Center

Gynnild, Vidar

2016-01-01

This study investigated ways to improve the appraisal of vocal performances within a national academy of music. Since a criterion-based assessment framework had already been adopted, the conceptual foundation of an assessment rubric was used as a guide in an action research project. The group of teachers involved wanted to explore thinking…

File-access characteristics of parallel scientific workloads

NASA Technical Reports Server (NTRS)

Nieuwejaar, Nils; Kotz, David; Purakayastha, Apratim; Best, Michael; Ellis, Carla Schlatter

1995-01-01

Phenomenal improvements in the computational performance of multiprocessors have not been matched by comparable gains in I/O system performance. This imbalance has resulted in I/O becoming a significant bottleneck for many scientific applications. One key to overcoming this bottleneck is improving the performance of parallel file systems. The design of a high-performance parallel file system requires a comprehensive understanding of the expected workload. Unfortunately, until recently, no general workload studies of parallel file systems have been conducted. The goal of the CHARISMA project was to remedy this problem by characterizing the behavior of several production workloads, on different machines, at the level of individual reads and writes. The first set of results from the CHARISMA project describe the workloads observed on an Intel iPSC/860 and a Thinking Machines CM-5. This paper is intended to compare and contrast these two workloads for an understanding of their essential similarities and differences, isolating common trends and platform-dependent variances. Using this comparison, we are able to gain more insight into the general principles that should guide parallel file-system design.

Design Improvements and X-Ray Performance of a Time Projection Chamber Polarimeter for Persistent Astronomical Sources

NASA Technical Reports Server (NTRS)

Hill, Joanne E.; Black, J. Kevin; Emmett, Thomas J.; Enoto, Teruaki; Jahoda, Keith M.; Kaaret, Philip; Nolan, David S.; Tamagawa, Toru

2014-01-01

The design of the Time-Projection Chamber (TPC) Polarimeter for the Gravity and Extreme Magnetism Small Explorer (GEMS) was demonstrated to Technology Readiness Level 6 (TRL-6)3 and the flight detectors fabricated, assembled and performance tested. A single flight detector was characterized at the Brookhaven National Laboratory Synchrotron Light Source with polarized X-rays at 10 energies from 2.3-8.0 keV at five detector positions. The detector met all of the GEMS performance requirements. Lifetime measurements have shown that the existing flight design has 23 years of lifetime4, opening up the possibility of relaxing material requirements, in particular the consideration of the use of epoxy, to reduce risk elsewhere. We report on design improvements to the GEMS detector to enable a narrower transfer gap that, when operated with a lower transfer field, reduces asymmetries in the detector response. In addition, the new design reduces cost and risk by simplifying the assembly and reducing production time. Finally, we report on the performance of the narrow-gap detector in response to polarized and unpolarized X-rays.

Intermediate Experimental Vehicle (IXV): Avionics and Software of the ESA Reentry Demonstrator

NASA Astrophysics Data System (ADS)

Malucchi, Giovanni; Dussy, Stephane; Camuffo, Fabrizio

2012-08-01

The IXV project is conceived as a technology platform that would perform the step forward with respect to the Atmospheric Reentry Demonstrator (ARD), by increasing the system maneuverability and verifying the critical technology performances against a wider re- entry corridor.The main objective is to design, develop and to perform an in-flight verification of an autonomous lifting and aerodynamically controlled (by a combined use of thrusters and aerodynamic surfaces) reentry system.The project also includes the verification and experimentation of a set of critical reentry technologies and disciplines:Thermal Protection System (TPS), for verification and characterization of thermal protection technologies in representative operational environment;Aerodynamics - Aerthermodynamics (AED-A TD), for understanding and validation of aerodynamics and aerothermodyamics phenomena with improvement of design tools;Guidance, Navigation and Control (GNC), for verification of guidance, navigation and control techniques in representative operational environment (i.e. reentry from Low Earth Orbit);Flight dynamics, to update and validate the vehicle model during actual flight, focused on stability and control derivatives.The above activities are being performed through the implementation of a strict system design-to-cost approach with a proto-flight model development philosophy.In 2008 and 2009, the IXV project activities reached the successful completion of the project Phase-B, including the System PDR, and early project Phase-C.In 2010, following a re-organization of the industrial consortium, the IXV project successfully completed a design consolidation leading to an optimization of the technical baseline including the GNC, avionics (i.e. power, data handling, radio frequency and telemetry), measurement sensors, hot and cold composite structures, thermal protections and control, with significant improvements of the main system budgets.The project has successfully closed the System CDR during 2011 and it is currently running the Phase-D with the target to be launched with Vega from Kourou in 2014The paper will provide an overview of the IXV design and mission objectives in the frame of the atmospheric reentry overall activities, focusing on the avionics and software architecture and design.

Improving Project Management with Simulation and Completion Distribution Functions

NASA Technical Reports Server (NTRS)

Cates, Grant R.

2004-01-01

Despite the critical importance of project completion timeliness, management practices in place today remain inadequate for addressing the persistent problem of project completion tardiness. A major culprit in late projects is uncertainty, which most, if not all, projects are inherently subject to. This uncertainty resides in the estimates for activity durations, the occurrence of unplanned and unforeseen events, and the availability of critical resources. In response to this problem, this research developed a comprehensive simulation based methodology for conducting quantitative project completion time risk analysis. It is called the Project Assessment by Simulation Technique (PAST). This new tool enables project stakeholders to visualize uncertainty or risk, i.e. the likelihood of their project completing late and the magnitude of the lateness, by providing them with a completion time distribution function of their projects. Discrete event simulation is used within PAST to determine the completion distribution function for the project of interest. The simulation is populated with both deterministic and stochastic elements. The deterministic inputs include planned project activities, precedence requirements, and resource requirements. The stochastic inputs include activity duration growth distributions, probabilities for events that can impact the project, and other dynamic constraints that may be placed upon project activities and milestones. These stochastic inputs are based upon past data from similar projects. The time for an entity to complete the simulation network, subject to both the deterministic and stochastic factors, represents the time to complete the project. Repeating the simulation hundreds or thousands of times allows one to create the project completion distribution function. The Project Assessment by Simulation Technique was demonstrated to be effective for the on-going NASA project to assemble the International Space Station. Approximately $500 million per month is being spent on this project, which is scheduled to complete by 2010. NASA project stakeholders participated in determining and managing completion distribution functions produced from PAST. The first result was that project stakeholders improved project completion risk awareness. Secondly, using PAST, mitigation options were analyzed to improve project completion performance and reduce total project cost.

Agile Task Tracking Tool

DOE Office of Scientific and Technical Information (OSTI.GOV)

Duke, Roger T.; Crump, Thomas Vu

The work was created to provide a tool for the purpose of improving the management of tasks associated with Agile projects. Agile projects are typically completed in an iterative manner with many short duration tasks being performed as part of iterations. These iterations are generally referred to as sprints. The objective of this work is to create a single tool that enables sprint teams to manage all of their tasks in multiple sprints and automatically produce all standard sprint performance charts with minimum effort. The format of the printed work is designed to mimic a standard Kanban board. The workmore » is developed as a single Excel file with worksheets capable of managing up to five concurrent sprints and up to one hundred tasks. It also includes a summary worksheet providing performance information from all active sprints. There are many commercial project management systems typically designed with features desired by larger organizations with many resources managing multiple programs and projects. The audience for this work is the small organizations and Agile project teams desiring an inexpensive, simple, user-friendly, task management tool. This work uses standard readily available software, Excel, requiring minimum data entry and automatically creating summary charts and performance data. It is formatted to print out and resemble standard flip charts and provide the visuals associated with this type of work.« less

ThedaCare's business performance system: sustaining continuous daily improvement through hospital management in a lean environment.

PubMed

Barnas, Kim

2011-09-01

For 2003-2008, ThedaCare, a community health system in Wisconsin, achieved significant improvements in quality and the elimination of waste through the development of an improvement system, which included Value Stream analysis, rapid improvement events, and projects applied to specific processes. However, to meet its continuous daily improvement goals, particularly the goal of increasing productivity by 10% annually, ThedaCare needed to change the way its managers and leaders (in its hospital division) conduct and manage their daily work. Accordingly, it developed its Business Performance System (BPS) to achieve and sustain continuous daily improvement. BUILDING THE BPS: ThedaCare devised a multipart pilot project, consisting of "learning to see" and then, "problem solving." On completion of the 15-week alpha phase (6 units) in July 2009, the BPS was spread to the beta pilot (12 units; September 2009-January 2010) and then to cohort 3 (10 units; September 2010-January 2011). Each alpha unit improved performance on (1) the key driver metric of increasing productivity from 2008 to year-end 2009 (by 1%-11%) and (2) its respective safety/ quality drivers over the respective 2008 baselines. For 2010, improvements across the alpha, beta, and cohort 3 units were found for 11 of the 14 safety/quality drivers-85% of the 11 customer satisfaction drivers, 83% of 6 people engagement drivers; and 48% of 23 financial stewardship drivers. The tools developed for the BPS have enabled teams to see, prioritize, and pursue continuous daily improvement opportunities. Unit leaders now have a structured management reporting system to reduce variation in their management styles. Leaders all now follow leadership standard work, and their daily work is now consistently aligned with the hospital and system strategy.

CrossTalk: The Journal of Defense Software Engineering. Volume 19, Number 6

DTIC Science & Technology

2006-06-01

improvement methods. The total volume of projects studied now exceeds 12,000. Software Productivity Research, LLC Phone: (877) 570-5459 (973) 273-5829...While performing quality con- sulting, Olson has helped organizations measurably improve quality and productivity , save millions of dollars in costs of...This article draws parallels between the outrageous events on the Jerry Springer Show and problems faced by process improvement programs. by Paul

Using adapted quality-improvement approaches to strengthen community-based health systems and improve care in high HIV-burden sub-Saharan African countries.

PubMed

Horwood, Christiane M; Youngleson, Michele S; Moses, Edward; Stern, Amy F; Barker, Pierre M

2015-07-01

Achieving long-term retention in HIV care is an important challenge for HIV management and achieving elimination of mother-to-child transmission. Sustainable, affordable strategies are required to achieve this, including strengthening of community-based interventions. Deployment of community-based health workers (CHWs) can improve health outcomes but there is a need to identify systems to support and maintain high-quality performance. Quality-improvement strategies have been successfully implemented to improve quality and coverage of healthcare in facilities and could provide a framework to support community-based interventions. Four community-based quality-improvement projects from South Africa, Malawi and Mozambique are described. Community-based improvement teams linked to the facility-based health system participated in learning networks (modified Breakthrough Series), and used quality-improvement methods to improve process performance. Teams were guided by trained quality mentors who used local data to help nurses and CHWs identify gaps in service provision and test solutions. Learning network participants gathered at intervals to share progress and identify successful strategies for improvement. CHWs demonstrated understanding of quality-improvement concepts, tools and methods, and implemented quality-improvement projects successfully. Challenges of using quality-improvement approaches in community settings included adapting processes, particularly data reporting, to the education level and first language of community members. Quality-improvement techniques can be implemented by CHWs to improve outcomes in community settings but these approaches require adaptation and additional mentoring support to be successful. More research is required to establish the effectiveness of this approach on processes and outcomes of care.

A conceptual framework to development of construction safety culture in Indonesia

NASA Astrophysics Data System (ADS)

Armyn Machfudiyanto, Rossy; Latief, Yusuf

2017-12-01

Working accidents in the construction industry are among the highest in the world, affecting the three levels of both macro (National) mezzo (Enterprise) and micro (Projects) that need to be integrated in building a safety culture. The purpose of this research is to develop a conceptual framework in improving safety culture in the construction industry in Indonesia. The methodology was developed using literature study and deductive analysis which then performed expert validation to ensure the concept developed. The result of this research is that policy and institution as input to build safety culture which need to be followed up with increasing of company maturity which have implication to safety performance and construction project performance.

Improving Service Delivery in a County Health Department WIC Clinic: An Application of Statistical Process Control Techniques

PubMed Central

Boe, Debra Thingstad; Parsons, Helen

2009-01-01

Local public health agencies are challenged to continually improve service delivery, yet they frequently operate with constrained resources. Quality improvement methods and techniques such as statistical process control are commonly used in other industries, and they have recently been proposed as a means of improving service delivery and performance in public health settings. We analyzed a quality improvement project undertaken at a local Special Supplemental Nutrition Program for Women, Infants, and Children (WIC) clinic to reduce waiting times and improve client satisfaction with a walk-in nutrition education service. We used statistical process control techniques to evaluate initial process performance, implement an intervention, and assess process improvements. We found that implementation of these techniques significantly reduced waiting time and improved clients' satisfaction with the WIC service. PMID:19608964

OPTiM: Optical projection tomography integrated microscope using open-source hardware and software

PubMed Central

Andrews, Natalie; Davis, Samuel; Bugeon, Laurence; Dallman, Margaret D.; McGinty, James

2017-01-01

We describe the implementation of an OPT plate to perform optical projection tomography (OPT) on a commercial wide-field inverted microscope, using our open-source hardware and software. The OPT plate includes a tilt adjustment for alignment and a stepper motor for sample rotation as required by standard projection tomography. Depending on magnification requirements, three methods of performing OPT are detailed using this adaptor plate: a conventional direct OPT method requiring only the addition of a limiting aperture behind the objective lens; an external optical-relay method allowing conventional OPT to be performed at magnifications >4x; a remote focal scanning and region-of-interest method for improved spatial resolution OPT (up to ~1.6 μm). All three methods use the microscope’s existing incoherent light source (i.e. arc-lamp) and all of its inherent functionality is maintained for day-to-day use. OPT acquisitions are performed on in vivo zebrafish embryos to demonstrate the implementations’ viability. PMID:28700724

The Medicine with Respect Project: a stakeholder focus group evaluation.

PubMed

Hemingway, Steve; White, Jacquie; Turner, James; Dewhirst, Kate; Smith, George

2012-11-01

The administration of medicines is a role that fundamentally impacts on the wellbeing of the patient and has been described as one of the highest risk activities that a nurse undertakes. This article reports on the Medicine with Respect Project where collaborating organisations sought to improve the education and training of Mental Health Nurses toward safe and competence practice. Focus groups were used to evaluate stakeholders experiences and what emerged was overall satisfaction but with specific suggestions in how to improve the effectiveness of the project. All groups emphasised that all nurses in administering medicines should undergo a rigorous assessment of their medicines administration performance. This would make the ultimate aim of competent and safe practice more achievable. Copyright © 2012 Elsevier Ltd. All rights reserved.

Quality assurance and improvement: the Pediatric Regional Anesthesia Network.

PubMed

Polaner, David M; Martin, Lynn D

2012-01-01

Quality assurance and improvement (QA/QI) is a critical activity in medicine. The use of large-scale collaborative databases is increasingly essential to obtain enough reports with which to establish standards of practice and define the incidence of complications and risk/benefit ratios for rare events. Such projects can enhance local QA/QI endeavors by enabling institutions to obtain benchmark data against which to compare their performance and can be used for prospective analyses of inter-institutional differences to determine 'best practice'. The pediatric regional anesthesia network (PRAN) is such a project. The first data cohort is currently being analyzed and offers insight into how such data can be used to detect trends in adverse events and improve care. © 2011 Blackwell Publishing Ltd.

Robust Decision Making for Improved Mission Assurance

DTIC Science & Technology

2014-06-01

Technology Team (STT) proposed and was approved to receive funding for a set of four research projects advancing foundational decision science and... technology over a three year period of performance. At the time it was approved, the initiative involved 27 collaborating scientists and engineers from five...Appendix E. Sensors Directorate Technologies for Robust Decision Making for Improved Mission Assurance

Rockford Public Library's Circulation Services: A Work Flow Analysis and Spacial Analysis Study with Recommendations and Comments.

ERIC Educational Resources Information Center

Titus, Elizabeth; Grant, Wallace

The purpose of this project was to perform an analysis of the Rockford Public Library (Illinois) circulation services department and provide recommendations leading to customer service improvement, better space utilization, and improved departmental work flow. Based on an analysis of input from individual interviews with staff, review of…

Advanced Information Processing. Volume I. Student's Materials. Curriculum Improvement Project. Region II.

ERIC Educational Resources Information Center

Stanford, Linda

This course curriculum is intended for use in an advanced information processing course. It builds on the skills developed in the previous information processing course but goes one step further by requiring students to perform in a simulated office environment and improve their decision-making skills. This volume contains two parts of the…

Overall aspects of Bt in forest service cooperative gypsy moth suppression projects

Treesearch

Noel F. Schneeberger

1985-01-01

Improvements in Bt performance and cost, coupled with public concerns over human health risks have elevated Bt to a viable alternative to chemical insecticides. Operational use of Bt in recent years has demonstrated that while foliage protection can generally be achieved in most situations, gypsy moth population reduction cannot. Efforts are needed to improve Bt...

Improving the Professional Knowledge Base for Education: Using Knowledge Management and Web 2.0 Tools

ERIC Educational Resources Information Center

Leask, Marilyn

2011-01-01

Improving education systems is an elusive goal. Despite considerable investment, international studies such as the Teaching and Learning International Survey (TALIS) project of the Organisation for Economic Cooperation and Development (OECD) and the McKinsey Report, "How The World's Best Performing Schools Come Out On Top", indicate that improving…

Some Probable Technological Trends and Their Impact on an Information Network System. LINCS Project Document Series.

ERIC Educational Resources Information Center

Ebersole, Joseph L.

Improvements in the technology associated with the information sciences will have their primary potential impact on the distribution of costs, information flow level, information availability, and use among information channels. This improvement implied not only a capability to perform a given function, but a lower cost. For example, the trend…

Does Agency Competition Improve the Quality of Policy Analysis? Evidence from OMB and CBO Fiscal Projections

ERIC Educational Resources Information Center

Krause, George A.; Douglas, James W.

2006-01-01

Public management scholars often claim that agency competition provides an effective institutional check on monopoly authority, and hence, leads to improvement of administrative performance in public sector agencies. This logic was central for creating the Congressional Budget Office (CBO) in 1975 to challenge the policy information provided by…

ARSENIC REMOVAL FROM DRINKING WATER BY ADSORPTIVE MEDIA. U.S. EPA DEMONSTRATION PROJECT AT SOUTH TRUCKEE MEADOWS GENERAL IMPROVEMENT DISTRICT (STMIG), NV. INTERIM EVALUATION REPORT

EPA Science Inventory

This report documents the activities performed during and the results obtained from the first 32 weeks of operation of an arsenic and antimony removal technology currently being demonstrated at the South Truckee Meadows General Improvement District (STMGID) in Washoe County, NV. ...

DOE Office of Scientific and Technical Information (OSTI.GOV)

Eshraghi, Ray

In September 2008, the U.S. Department of Energy and Martin County Economic Development Corporation entered into an agreement to further the advancement of a microtubular PEM fuel cell developed by Microcell Corporation. The overall focus of this project was on research and development related to high volume manufacturing of fuel cells and cost reduction in the fuel cell manufacturing process. The extrusion process used for the microfiber fuel cells in this project is inherently a low cost, high volume, high speed manufacturing process. In order to take advantage of the capabilities that the extrusion process provides, all subsequent manufacturing processesmore » must be enhanced to meet the extrusion line’s speed and output. Significant research and development was completed on these subsequent processes to ensure that power output and performance were not negatively impacted by the higher speeds, design changes and process improvements developed in this project. All tasks were successfully completed resulting in cost reductions, performance improvements and process enhancements in the areas of speed and quality. These results support the Department of Energy’s goal of fuel cell commercialization.« less

Louisiana State Performance Plan--Part B. July 1, 2005-June 30, 2011. Under the Individuals with Disabilities Educational Improvement Act of 2004. Revised

ERIC Educational Resources Information Center

White, John

2012-01-01

Louisiana developed a time frame for compiling the State Performance Plan with as much opportunity for broad stakeholder input as possible before the required submission date. Bearing in mind the requirements of No Child Left Behind (NCLB) legislation, Louisiana's Steering Committee projected performance targets through the year 2014 for the…

The psychosocial conditions and intensified education that may affect school performance of HIV/AIDS orphaned children on antiretroviral drugs.

PubMed

Shahum, Gregory; Shahum, Andrea; Sladeckova, Veronika; Hardy, Maria; Rabarova, Lenka; Benca, George J

2013-09-01

This study begins with interpreting basic academic results from the House of Family (HOF) comprehensive project for HIV/AIDS orphaned children. We reviewed school performance during the academic period from 2007 to 2012. All the children in the HOF project have vertically acquired HIV infection, with approximately 90% being with AIDS/Clinical Stage C at the time of admission. Initiation of antiretroviral drugs (ARV) was at the average age of 7 (mean 6.94, median 6.5, and a mode of 6). In the year 2007, 44 children had been receiving ARV. The majority of these children 32 (72.7%) were on ARV for at least 1 year, 6 (13.6%) of the children on ARV for 4 years, 7 (15.9%) were on ARV for 3 years, 5 (11.3%) for 2 years, 14 (31.8%) for 1 year, and 12 (27.2%) started ARV on that year. Later on, an additional 2 children started ARV in 2008, 1 child in 2009, and 4 children in 2010. We found that the total number of children achieving a certain academic level changed very little between each scholastic year. During the four years of school reviewed, it was noted that the Poor performers made improvement and an increase in Good performance grades was also achieved. The trend of Fair levels remained mostly unchanged at 65%, 70.2%, 68.5%, and 64.6% respectively. The overall passing performance, including both Fair and Good scores, improved from 67.5% in 2008 to 80.8% the following year of school. This passing rate of 80.8% in 2009 remains stable over the next two years at 80.3% and 80.3% respectively. Despite the late introduction of ARV medicine, limited family and social support, and deficient academic achievement, the children of HOF were able to improve their school performance due to intensified psychosocial and educational support provided at the HOF comprehensive project.

Final Report - High Performance, Durable, Low Cost Membrane Electrode Assemblies for Transportation Applications

DOE Office of Scientific and Technical Information (OSTI.GOV)

Steinbach, Andrew

2017-05-31

The primary project objective was development of improved polymer electrolyte membrane fuel cell (PEMFC) membrane electrode assemblies (MEAs) which address the key DOE barriers of performance, durability and cost. Additional project objectives were to address commercialization barriers specific to MEAs comprising 3M nanostructured thin film (NSTF) electrodes, including a larger-than-acceptable sensitivity to operating conditions, an unexplained loss of rated power capability with operating time, and slow break-in conditioning. Significant progress was made against each of these barriers, and most DOE 2020 targets were met or substantially approached.

The role of field auditing in environmental quality assurance management.

PubMed

Claycomb, D R

2000-01-01

Environmental data quality improvement continues to focus on analytical laboratoryperformance with little, if any, attention given to improving the performance of field consultants responsible for sample collection. Many environmental professionals often assume that the primary opportunity for data error lies within the activities conducted by the laboratory. Experience in the evaluation of environmental data and project-wide quality assurance programs indicates that an often-ignored factor affecting environmental data quality is the manner in which a sample is acquired and handled in the field. If a sample is not properly collected, preserved, stored, and transported in the field, even the best laboratory practices and analytical methods cannot deliver accurate and reliable data (i.e., bad data in equals bad data out). Poor quality environmental data may result in inappropriate decisions regarding site characterization and remedial action. Field auditing is becoming an often-employed technique for examining the performance of the environmental sampling field team and how their performance may affect data quality. The field audits typically focus on: (1) verifying that field consultants adhere to project control documents (e.g., Work Plans and Standard Operating Procedures [SOPs]) during field operations; (2) providing third-party independent assurance that field procedures, quality assurance/ quality control (QA/QC)protocol, and field documentation are sufficient to produce data of satisfactory quality; (3) providing a defense in the event that field procedures are called into question; and (4) identifying ways to reduce sampling costs. Field audits are typically most effective when performed on a surprise basis; that is, the sampling contractor may be aware that a field audit will be conducted during some phase of sampling activities but is not informed of the specific day(s) that the audit will be conducted. The audit also should be conducted early on in the sampling program such that deficiencies noted during the audit can be addressed before the majority of field activities have been completed. A second audit should be performed as a follow-up to confirm that the recommended changes have been implemented. A field auditor is assigned to the project by matching, as closely as possible, the auditor's experience with the type of field activities being conducted. The auditor uses a project-specific field audit checklist developed from key information contained in project control documents. Completion of the extensive audit checklist during the audit focuses the auditor on evaluating each aspect of field activities being performed. Rather than examine field team performance after sampling, a field auditor can do so while the samples are being collected and can apply real-time corrective action as appropriate. As a result of field audits, responsible parties often observe vast improvements in their consultant's field procedures and, consequently, receive more reliable and representative field data at a lower cost. The cost savings and improved data quality that result from properly completed field audits make the field auditing process both cost-effective and functional.

Explaining technological change of wind power in China and the United States: Roles of energy policies, technological learning, and collaboration

NASA Astrophysics Data System (ADS)

Tang, Tian

The following dissertation explains how technological change of wind power, in terms of cost reduction and performance improvement, is achieved in China and the US through energy policies, technological learning, and collaboration. The objective of this dissertation is to understand how energy policies affect key actors in the power sector to promote renewable energy and achieve cost reductions for climate change mitigation in different institutional arrangements. The dissertation consists of three essays. The first essay examines the learning processes and technological change of wind power in China. I integrate collaboration and technological learning theories to model how wind technologies are acquired and diffused among various wind project participants in China through the Clean Development Mechanism (CDM)--an international carbon trade program, and empirically test whether different learning channels lead to cost reduction of wind power. Using pooled cross-sectional data of Chinese CDM wind projects and spatial econometric models, I find that a wind project developer's previous experience (learning-by-doing) and industrywide wind project experience (spillover effect) significantly reduce the costs of wind power. The spillover effect provides justification for subsidizing users of wind technologies so as to offset wind farm investors' incentive to free-ride on knowledge spillovers from other wind energy investors. The CDM has played such a role in China. Most importantly, this essay provides the first empirical evidence of "learning-by-interacting": CDM also drives wind power cost reduction and performance improvement by facilitating technology transfer through collaboration between foreign turbine manufacturers and local wind farm developers. The second essay extends this learning framework to the US wind power sector, where I examine how state energy policies, restructuring of the electricity market, and learning among actors in wind industry lead to performance improvement of wind farms. Unlike China, the restructuring of the US electricity market created heterogeneity in transmission network governance across regions. Thus, I add transmission network governance to my learning framework to test the impacts of different transmission network governance models. Using panel data of existing utility-scale wind farms in US during 2001-2012 and spatial models, I find that the performance of a wind project is improved through more collaboration among project participants (learning-by-interacting), and this improvement is even greater if the wind project is interconnected to a regional transmission network coordinated by an independent system operator or a regional transmission organization (ISO/RTO). In the third essay, I further explore how different transmission network governance models affect wind power integration through a comparative case study. I compare two regional transmission networks, which represent two major transmission network governance models in the US: the ISO/RTO-governance model and the non-RTO model. Using archival data and interviews with key network participants, I find that a centralized transmission network coordinated through an ISO/RTO is more effective in integrating wind power because it allows resource pooling and optimal allocating of the resources by the central network administrative agency (NAO). The case study also suggests an alternative path to improved network effectiveness for a less cohesive network, which is through more frequent resource exchange among subgroups within a large network. On top of that, this essay contributes to the network governance literature by providing empirical evidence on the coexistence of hierarchy, market, and collaboration in complex service delivery networks. These coordinating mechanisms complement each other to provide system flexibility and stability, particularly when the network operates in a turbulent environment with changes and uncertainties.

Adaptive-projection intrinsically transformed multivariate empirical mode decomposition in cooperative brain-computer interface applications.

PubMed

Hemakom, Apit; Goverdovsky, Valentin; Looney, David; Mandic, Danilo P

2016-04-13

An extension to multivariate empirical mode decomposition (MEMD), termed adaptive-projection intrinsically transformed MEMD (APIT-MEMD), is proposed to cater for power imbalances and inter-channel correlations in real-world multichannel data. It is shown that the APIT-MEMD exhibits similar or better performance than MEMD for a large number of projection vectors, whereas it outperforms MEMD for the critical case of a small number of projection vectors within the sifting algorithm. We also employ the noise-assisted APIT-MEMD within our proposed intrinsic multiscale analysis framework and illustrate the advantages of such an approach in notoriously noise-dominated cooperative brain-computer interface (BCI) based on the steady-state visual evoked potentials and the P300 responses. Finally, we show that for a joint cognitive BCI task, the proposed intrinsic multiscale analysis framework improves system performance in terms of the information transfer rate. © 2016 The Author(s).

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mosher, J.C.; Leahy, R.M.

A new method for source localization is described that is based on a modification of the well known multiple signal classification (MUSIC) algorithm. In classical MUSIC, the array manifold vector is projected onto an estimate of the signal subspace, but errors in the estimate can make location of multiple sources difficult. Recursively applied and projected (RAP) MUSIC uses each successively located source to form an intermediate array gain matrix, and projects both the array manifold and the signal subspace estimate into its orthogonal complement. The MUSIC projection is then performed in this reduced subspace. Using the metric of principal angles,more » the authors describe a general form of the RAP-MUSIC algorithm for the case of diversely polarized sources. Through a uniform linear array simulation, the authors demonstrate the improved Monte Carlo performance of RAP-MUSIC relative to MUSIC and two other sequential subspace methods, S and IES-MUSIC.« less

Performance assessment of the PNM Prosperity electricity storage project

DOE Office of Scientific and Technical Information (OSTI.GOV)

Roberson, Dakota; Ellison, James F.; Bhatnagar, Dhruv

2014-05-01

The purpose of this study is to characterize the technical performance of the PNM Prosperity electricity storage project, and to identify lessons learned that can be used to improve similar projects in the future. The PNM Prosperity electricity storage project consists of a 500 kW/350 kWh advanced lead-acid battery with integrated supercapacitor (for energy smoothing) and a 250 kW/1 MWh advanced lead-acid battery (for energy shifting), and is co-located with a 500 kW solar photovoltaic (PV) resource. The project received American Reinvestment and Recovery Act (ARRA) funding. The smoothing system is e ective in smoothing intermittent PV output. The shiftingmore » system exhibits good round-trip efficiencies, though the AC-to-AC annual average efficiency is lower than one might hope. Given the current utilization of the smoothing system, there is an opportunity to incorporate additional control algorithms in order to increase the value of the energy storage system.« less

Instituting systems-based practice and practice-based learning and improvement: a curriculum of inquiry

PubMed Central

Wilper, Andrew P.; Smith, Curtis Scott; Weppner, William

2013-01-01

Background The Accreditation Council for Graduate Medical Education (ACGME) requires that training programs integrate system-based practice (SBP) and practice-based learning and improvement (PBLI) into internal medicine residency curricula. Context and setting We instituted a seminar series and year-long-mentored curriculum designed to engage internal medicine residents in these competencies. Methods Residents participate in a seminar series that includes assigned reading and structured discussion with faculty who assist in the development of quality improvement or research projects. Residents pursue projects over the remainder of the year. Monthly works in progress meetings, protected time for inquiry, and continued faculty mentorship guide the residents in their project development. Trainees present their work at hospital-wide grand rounds at the end of the academic year. We performed a survey of residents to assess their self-reported knowledge, attitudes and skills in SBP and PBLI. In addition, blinded faculty scored projects for appropriateness, impact, and feasibility. Outcomes We measured resident self-reported knowledge, attitudes, and skills at the end of the academic year. We found evidence that participants improved their understanding of the context in which they were practicing, and that their ability to engage in quality improvement projects increased. Blinded faculty reviewers favorably ranked the projects’ feasibility, impact, and appropriateness. The ‘Curriculum of Inquiry’ generated 11 quality improvement and research projects during the study period. Barriers to the ongoing work include a limited supply of mentors and delays due to Institutional Review Board approval. Hospital leadership recognizes the importance of the curriculum, and our accreditation manager now cites our ongoing work. Conclusions A structured residency-based curriculum facilitates resident demonstration of SBP and practice-based learning and improvement. Residents gain knowledge and skills though this enterprise and hospitals gain access to trainees who help to solve ongoing problems and meet accreditation requirements. PMID:24044686

Using a telehealth service delivery approach to working with an undergraduate student with a traumatic brain injury: A case study.

PubMed

Quaco, Carrie

2017-09-14

Project Career is a five year NIDILRR-funded interprofessional demonstration project aimed to improve the academic and career success of undergraduate students who have a traumatic brain injury (TBI). The information for this case study was collected and synthesized by an occupational therapy graduate student intern for one of the Project Career sites in collaboration with the Technology and Employment Coordinator for the site, the co-PI for Project Career, and the student participant. A case study is presented to provide an understanding of one of the Project Career participant's experience using a telehealth service delivery approach to working with Project Career for academic and career support. The participant's case notes, direct communication with the intern, and outcome assessments were used to perform a qualitative analysis. The participant reported that he believed Project Career was an effective support service for him. However, the participant's initial and 6-month outcome assessment scores are inconclusive regarding improvements in his academic abilities and satisfaction with academic and career attainment. Further research on the effectiveness of using a telehealth service delivery approach to working with undergraduate students with a TBI is needed.

Work zone performance monitoring application development.

DOT National Transportation Integrated Search

2016-10-01

The Federal Highway Administration (FHWA) requires state transportation agencies to (a) collect and analyze safety and mobility data to manage the work zone impacts of individual projects during construction and (b) improve overall agency processes a...

High plastic concrete temperature specifications for paving mixtures.

DOT National Transportation Integrated Search

2011-08-01

This report documents a study performed for the Illinois Department of Transportation (IDOT) regarding : concrete roadway construction in hot weather. The main objective in this project is to develop improved : specifications and procedures with resp...

Case Study -- Improving Management Performance

ERIC Educational Resources Information Center

Stait, Norman

1970-01-01

The Knitting, Lace, and Net Industry Training Board in Great Britain is beginning to work with management training, using three firms for experimental pilot projects. The Board plans to introduce this management system throughout the industry. (MF)

76 FR 78343 - HOME Investment Partnerships Program: Improving Performance and Accountability; and Updating...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-16

... their programs and in managing their growing portfolios of older HOME projects. These challenges include... program. Examples of such uses are hospice buildings, nursing homes, foster homes, halfway houses, and...

An augmented-reality edge enhancement application for Google Glass.

PubMed

Hwang, Alex D; Peli, Eli

2014-08-01

Google Glass provides a platform that can be easily extended to include a vision enhancement tool. We have implemented an augmented vision system on Glass, which overlays enhanced edge information over the wearer's real-world view, to provide contrast-improved central vision to the Glass wearers. The enhanced central vision can be naturally integrated with scanning. Google Glass' camera lens distortions were corrected by using an image warping. Because the camera and virtual display are horizontally separated by 16 mm, and the camera aiming and virtual display projection angle are off by 10°, the warped camera image had to go through a series of three-dimensional transformations to minimize parallax errors before the final projection to the Glass' see-through virtual display. All image processes were implemented to achieve near real-time performance. The impacts of the contrast enhancements were measured for three normal-vision subjects, with and without a diffuser film to simulate vision loss. For all three subjects, significantly improved contrast sensitivity was achieved when the subjects used the edge enhancements with a diffuser film. The performance boost is limited by the Glass camera's performance. The authors assume that this accounts for why performance improvements were observed only with the diffuser filter condition (simulating low vision). Improvements were measured with simulated visual impairments. With the benefit of see-through augmented reality edge enhancement, natural visual scanning process is possible and suggests that the device may provide better visual function in a cosmetically and ergonomically attractive format for patients with macular degeneration.

Improvements in resist performance towards EUV HVM

NASA Astrophysics Data System (ADS)

Yildirim, Oktay; Buitrago, Elizabeth; Hoefnagels, Rik; Meeuwissen, Marieke; Wuister, Sander; Rispens, Gijsbert; van Oosten, Anton; Derks, Paul; Finders, Jo; Vockenhuber, Michaela; Ekinci, Yasin

2017-03-01

Extreme ultraviolet (EUV) lithography with 13.5 nm wavelength is the main option for sub-10nm patterning in the semiconductor industry. We report improvements in resist performance towards EUV high volume manufacturing. A local CD uniformity (LCDU) model is introduced and validated with experimental contact hole (CH) data. Resist performance is analyzed in terms of ultimate printing resolution (R), line width roughness (LWR), sensitivity (S), exposure latitude (EL) and depth of focus (DOF). Resist performance of dense lines at 13 nm half-pitch and beyond is shown by chemical amplified resist (CAR) and non-CAR (Inpria YA Series) on NXE scanner. Resolution down to 10nm half pitch (hp) is shown by Inpria YA Series resist exposed on interference lithography at the Paul Sherrer Institute. Contact holes contrast and consequent LCDU improvement is achieved on a NXE:3400 scanner by decreasing the pupil fill ratio. State-of-the-art imaging meets 5nm node requirements for CHs. A dynamic gas lock (DGL) membrane is introduced between projection optics box (POB) and wafer stage. The DGL membrane will suppress the negative impact of resist outgassing on the projection optics by 100%, enabling a wider range of resist materials to be used. The validated LCDU model indicates that the imaging requirements of the 3nm node can be met with single exposure using a high-NA EUV scanner. The current status, trends, and potential roadblocks for EUV resists are discussed. Our results mark the progress and the improvement points in EUV resist materials to support EUV ecosystem.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Puttagunta, Srikanth

National programs such as Home Performance with ENERGY STAR® and numerous other utility air sealing programs have brought awareness to homeowners of the benefits of energy efficiency retrofits. Yet, these programs tend to focus on the low-hanging fruit: air-sealing the thermal envelope and ductwork where accessible, switch to efficient lighting, and low-flow fixtures. At the other end of the spectrum, deep-energy retrofit programs are also being encouraged by various utilities across the country. While deep energy retrofits typically seek 50% energy savings, they are often quite costly and most applicable to gut-rehab projects. A significant potential for lowering energy usagemore » in existing homes lies between the low hanging fruit and deep energy retrofit approaches - retrofits that save approximately 30% in energy over the existing conditions. A key is to be non-intrusive with the efficiency measures so the retrofit projects can be accomplished in occupied homes. This cold climate retrofit project involved the design and optimization of a home in Connecticut that sought to improve energy savings by at least 30% (excluding solar PV) over the existing home's performance. This report documents the successful implementation of a cost-effective solution package that achieved performance greater than 30% over the pre-retrofit - what worked, what did not, and what improvements could be made.« less

Air Force Civil Engineer Center Management of Energy Savings Performance Contracts Needs Improvement

DTIC Science & Technology

2016-05-04

audits on Air Force ESPCs. Background ESPCs provide a way for the private sector to finance Federal Government energy savings projects . ESPC is a...through DoD Instruction23 requires that any funds paid by a DoD Component pursuant to a private-sector- financed energy project be from funds made...Defense F r a u d , W a s t e & A b u s e DODIG-2016-087 ( Project No. D2015-D000CI-0200.00) │ i Results in Brief Air Force Civil Engineer Center

Management of Service Projects in Support of Space Flight Research

NASA Technical Reports Server (NTRS)

Love, J.

2009-01-01

Goal:To provide human health and performance countermeasures, knowledge, technologies, and tools to enable safe, reliable, and productive human space exploration . [HRP-47051] Specific Objectives: 1) Develop capabilities, necessary countermeasures, and technologies in support of human space exploration, focusing on mitigating the highest risks to human health and performance. 2) Define and improve human spaceflight medical, environmental, and human factors standards. 3) Develop technologies that serve to reduce medical and environmental risks, to reduce human systems resource requirements (mass, volume, power, data, etc.) and to ensure effective human-system integration across exploration systems. 4) Ensure maintenance of Agency core competencies necessary to enable risk reduction in the following areas: A. Space medicine B. Physiological and behavioral effects of long duration spaceflight on the human body C. Space environmental effects, including radiation, on human health and performance D. Space "human factors" [HRP-47051]. Service projects can form integral parts of research-based project-focused programs to provide specialized functions. Traditional/classic project management methodologies and agile approaches are not mutually exclusive paradigms. Agile strategies can be combined with traditional methods and applied in the management of service projects functioning in changing environments. Creative collaborations afford a mechanism for mitigation of constrained resource limitations.

Model-driven approach to data collection and reporting for quality improvement

PubMed Central

Curcin, Vasa; Woodcock, Thomas; Poots, Alan J.; Majeed, Azeem; Bell, Derek

2014-01-01

Continuous data collection and analysis have been shown essential to achieving improvement in healthcare. However, the data required for local improvement initiatives are often not readily available from hospital Electronic Health Record (EHR) systems or not routinely collected. Furthermore, improvement teams are often restricted in time and funding thus requiring inexpensive and rapid tools to support their work. Hence, the informatics challenge in healthcare local improvement initiatives consists of providing a mechanism for rapid modelling of the local domain by non-informatics experts, including performance metric definitions, and grounded in established improvement techniques. We investigate the feasibility of a model-driven software approach to address this challenge, whereby an improvement model designed by a team is used to automatically generate required electronic data collection instruments and reporting tools. To that goal, we have designed a generic Improvement Data Model (IDM) to capture the data items and quality measures relevant to the project, and constructed Web Improvement Support in Healthcare (WISH), a prototype tool that takes user-generated IDM models and creates a data schema, data collection web interfaces, and a set of live reports, based on Statistical Process Control (SPC) for use by improvement teams. The software has been successfully used in over 50 improvement projects, with more than 700 users. We present in detail the experiences of one of those initiatives, Chronic Obstructive Pulmonary Disease project in Northwest London hospitals. The specific challenges of improvement in healthcare are analysed and the benefits and limitations of the approach are discussed. PMID:24874182

Improving data collection, documentation, and workflow in a dementia screening study.

PubMed

Read, Kevin B; LaPolla, Fred Willie Zametkin; Tolea, Magdalena I; Galvin, James E; Surkis, Alisa

2017-04-01

A clinical study team performing three multicultural dementia screening studies identified the need to improve data management practices and facilitate data sharing. A collaboration was initiated with librarians as part of the National Library of Medicine (NLM) informationist supplement program. The librarians identified areas for improvement in the studies' data collection, entry, and processing workflows. The librarians' role in this project was to meet needs expressed by the study team around improving data collection and processing workflows to increase study efficiency and ensure data quality. The librarians addressed the data collection, entry, and processing weaknesses through standardizing and renaming variables, creating an electronic data capture system using REDCap, and developing well-documented, reproducible data processing workflows. NLM informationist supplements provide librarians with valuable experience in collaborating with study teams to address their data needs. For this project, the librarians gained skills in project management, REDCap, and understanding of the challenges and specifics of a clinical research study. However, the time and effort required to provide targeted and intensive support for one study team was not scalable to the library's broader user community.

SDN Project

DOE Office of Scientific and Technical Information (OSTI.GOV)

Smith, Rhett

The SDN Project completed on time and on budget and successfully accomplished 100% of the scope of work outlined in the original Statement of Project Objective (SOPO). The SDN Project formed an alliance between Ameren Corporation, University of Illinois Urbana- Champaign (UIUC), Pacific Northwest National Laboratories (PNNL), and Schweitzer Engineering Laboratories, Inc. (SEL). The objective of the SDN Project is to address Topic Area of Interest 2: Sustain critical energy delivery functions while responding to a cyber-intrusion under Funding Opportunity Announcement DE-FOA-0000797. The goal of the project is to design and commercially release technology that provides a method to sustainmore » critical energy delivery functions during a cyber intrusion and to do this control system operators need the ability to quickly identify and isolate the affected network areas, and re-route critical information and control flows around. The objective of the SDN Project is to develop a Flow Controller that monitors, configures, and maintains the safe, reliable network traffic flows of all the local area networks (LANs) on a control system in the Energy sector. The SDN team identified the core attributes of a control system and produced an SDN flow controller that has the same core attributes enabling networks to be designed, configured and deployed that maximize the whitelisted, deny-bydefault and purpose built networks. This project researched, developed and commercially released technology that: Enables all field networks be to configured and monitored as if they are a single asset to be protected; Enables greatly improved and even precalculated response actions to reliability and cyber events; Supports pre-configured localized response actions tailored to provide resilience against failures and centralized response to cyber-attacks that improve network reliability and availability; Architecturally enables the right subject matter experts, who are usually the information technology and operational technology engineers, to be the ones centrally administering the technology and responding to events; Simplifies network configuration, improving deterministic Ethernet transport times, and providing instant visualization on where the communication circuits are and how all circuits are impacted when changes (e.g., configuration changes, failures or intrusions) happen, allowing operators to minimize downtime; and Improves the ability to identify deviations in network behavior resulting in detection and analysis of potential cyber intrusions and faster response times Results: This project has forever changed the way critical infrastructure networks are designed, secured, deployed and maintained. The cybersecurity and performance advantages achieved are significant, simply put traditional networking has been obsoleted while the team maintained Ethernet interoperability avoiding any legacy concerns. The team commercially released technology that accomplished all the cybersecurity goals outlined in the SOPO and completed it by executing the project management plan approved in the initial contract. The resulting Energy sector SDN flow controller model number is SEL-5056 and can be freely downloaded from the www.SELinc.com website. This technology not only improves the cybersecurity of control systems but has measured results that it improves the performance and reliability of the control system as well. This means the system owners can confidently apply it to their systems knowing that it will, “first do no harm” but actually improve the system as well. Success of the project is best measured by the sales and deployment of the technology. System owners in industrial, electric, defense, and oil and gas only months after commercial release have approved plans for deployment.« less

Schools to Watch: School Transformation Network, a U.S. Deparment of Education Investing in Innovation (i3) Development Grant. Final Evaluation Report

ERIC Educational Resources Information Center

Grantee Submission, 2015

2015-01-01

The Schools to Watch: School Transformation Network Project is a whole school reform model designed to improve the educational practices, experiences, and outcomes of low-performing middle-grades schools. Developed by the National Forum to Accelerate Middle-Grades Reform, the four-year project was funded in 2010 by a U.S. Department of Education…

Defense Infrastructure: Improved Guidance Needed for Estimating Alternatively Financed Project Liabilities

DTIC Science & Technology

2013-04-01

auditing standards. Those standards require that we plan and perform the audit to obtain sufficient, appropriate evidence to provide a reasonable basis for...our findings and conclusions based on our audit objectives. We believe that the evidence obtained provides a reasonable basis for our findings and...majority of the project financing is obtained from financial institutions in the form of construction loans or military housing bonds. The servicemembers

An innovative model for achieving breast-feeding success in infants with complex surgical anomalies.

PubMed

Edwards, Taryn M; Spatz, Diane L

2010-01-01

This manuscript describes an innovative nurse-driven continuous quality improvement project. Infants born with congenital surgical anomalies face significant challenges within the newborn period and human milk/breast-feeding may not be viewed as a priority. In many hospitals, nurses refer families to lactation consultants for all breast-feeding assistance and support. The Transition to Breast Pathway was developed on the basis of the evidence-based standards and protocols at The Children's Hospital of Philadelphia. The pathway consists of (1) initiation of pumping and maintenance of milk supply, (2) mouth care with human milk, (3) skin-to-skin care, (4) nonnutritive sucking at the breast, (5) transitioning to at breast feeds. A sample of 80 infants were enrolled in this project. Major results of the project are as follows: (1) mother's average milk supply was approximately 603 mL/d, (2) 71% (57/80) of the infants received mouth care with human milk, (3) 48% (38/80) mother/infant dyads performed skin-to-skin care, (4) 60% (35/58) of mother/infant dyads performed nonnutritive sucking at the breast, (5) 100% (58/58) of mother-infant dyads transitioned to breast prior to discharge. This continuous quality improvement project demonstrates that nurses can and should lead the process of transitioning infants to at breast feeds.

Seven Key Principles of Program and Project Success: A Best Practices Survey

NASA Technical Reports Server (NTRS)

Bilardo, Vincent J.; Korte, John J.; Dankhoff, Walter; Langan, Kevin; Branscome, Darrell R.; Fragola, Joseph R.; Dugal, Dale J.; Gormley, Thomas J.; Hammond, Walter E.; Hollopeter, James J.;

Fast image matching algorithm based on projection characteristics

NASA Astrophysics Data System (ADS)

Zhou, Lijuan; Yue, Xiaobo; Zhou, Lijun

2011-06-01

Based on analyzing the traditional template matching algorithm, this paper identified the key factors restricting the speed of matching and put forward a brand new fast matching algorithm based on projection. Projecting the grayscale image, this algorithm converts the two-dimensional information of the image into one-dimensional one, and then matches and identifies through one-dimensional correlation, meanwhile, because of normalization has been done, when the image brightness or signal amplitude increasing in proportion, it could also perform correct matching. Experimental results show that the projection characteristics based image registration method proposed in this article could greatly improve the matching speed, which ensuring the matching accuracy as well.

Using Medical Student Quality Improvement Projects to Promote Evidence-Based Care in the Emergency Department.

PubMed

Manning, Michael W; Bean, Eric W; Miller, Andrew C; Templer, Suzanne J; Mackenzie, Richard S; Richardson, David M; Bresnan, Kristin A; Greenberg, Marna R

2018-01-01

The Association of American Medical Colleges' (AAMC) initiative for Core Entrustable Professional Activities for Entering Residency includes as an element of Entrustable Professional Activity 13 to "identify system failures and contribute to a culture of safety and improvement." We set out to determine the feasibility of using medical students' action learning projects (ALPs) to expedite implementation of evidence-based pathways for three common patient diagnoses in the emergency department (ED) setting (Atrial fibrillation, congestive heart failure, and pulmonary embolism). These prospective quality improvement (QI) initiatives were performed over six months in three Northeastern PA hospitals. Emergency physician mentors were recruited to facilitate a QI experience for third-year medical students for each project. Six students were assigned to each mentor and given class time and network infrastructure support (information technology, consultant experts in lean management) to work on their projects. Students had access to background network data that revealed potential for improvement in disposition (home) for patients. Under the leadership of their mentors, students accomplished standard QI processes such as performing the background literature search and assessing key stakeholders' positions that were involved in the respective patient's care. Students effectively developed flow diagrams, computer aids for clinicians and educational programs, and participated in recruiting champions for the new practice standard. They met with other departmental clinicians to determine barriers to implementation and used this feedback to help set specific parameters to make clinicians more comfortable with the changes in practice that were recommended. All three clinical practice guidelines were initiated at consummation of the students' projects. After implementation, 86% (38/44) of queried ED providers felt comfortable with medical students being a part of future ED QI initiatives, and 84% (26/31) of the providers who recalled communicating with students on these projects felt they were effective. Using this novel technique of aligning small groups of medical students with seasoned mentors, it is feasible for medical students to learn important aspects of QI implementation and allows for their engagement to more efficiently move evidence-based medicine from the literature to the bedside.

Continuous quality improvement for continuity of care.

PubMed

Kibbe, D C; Bentz, E; McLaughlin, C P

1993-03-01

Continuous quality improvement (CQI) techniques have been used most frequently in hospital operations such as pharmaceutical ordering, patient admitting, and billing of insurers, and less often to analyze and improve processes that are close to the clinical interaction of physicians and their patients. This paper describes a project in which CQI was implemented in a family practice setting to improve continuity of care. A CQI study team was assembled in response to patients' complaints about not being able to see their regular physician providers when they wanted. Following CQI methods, the performance of the practice in terms of provider continuity was measured. Two "customer" groups were surveyed: physician faculty members were surveyed to assess their attitudes about continuity, and patients were surveyed about their preferences for provider continuity and convenience factors. Process improvements were selected in the critical pathways that influence provider continuity. One year after implementation of selected process improvements, repeat chart audit showed that provider continuity levels had improved from .45 to .74, a 64% increase from 1 year earlier. The project's main accomplishment was to establish the practicality of using CQI methods in a primary care setting to identify a quality issue of value to both providers and patients, in this case, continuity of provider care, and to identify processes that linked the performance of health care delivery procedures with patient expectations.

Improving Patient Care Outcomes Through Better Delegation-Communication Between Nurses and Assistive Personnel.

PubMed

Wagner, Elissa A

In acute care settings, registered nurses need to delegate effectively to unlicensed assistive personnel to provide safe care. This project explored the impact of improved delegation-communication between nurses and unlicensed assistive personnel on pressure injury rates, falls, patient satisfaction, and delegation practices. Findings revealed a tendency for nurses to delay the decision to delegate. However, nurses' ability to explain performance appraisals, facilitate clearer communication, and seek feedback improved. Patient outcomes revealed decreased falls and improved patient satisfaction.

An expert panel process to evaluate habitat restoration actions in the Columbia River estuary.

PubMed

Krueger, Kirk L; Bottom, Daniel L; Hood, W Gregory; Johnson, Gary E; Jones, Kim K; Thom, Ronald M

2017-03-01

We describe a process for evaluating proposed ecosystem restoration projects intended to improve survival of juvenile salmon in the Columbia River estuary (CRE). Changes in the Columbia River basin (northwestern USA), including hydropower development, have contributed to the listing of 13 salmon stocks as endangered or threatened under the U.S. Endangered Species Act. Habitat restoration in the CRE, from Bonneville Dam to the ocean, is part of a basin-wide, legally mandated effort to mitigate federal hydropower impacts on salmon survival. An Expert Regional Technical Group (ERTG) was established in 2009 to improve and implement a process for assessing and assigning "survival benefit units" (SBUs) to restoration actions. The SBU concept assumes site-specific restoration projects will increase juvenile salmon survival during migration through the 234 km CRE. Assigned SBUs are used to inform selection of restoration projects and gauge mitigation progress. The ERTG standardized the SBU assessment process to improve its scientific integrity, repeatability, and transparency. In lieu of experimental data to quantify the survival benefits of individual restoration actions, the ERTG adopted a conceptual model composed of three assessment criteria-certainty of success, fish opportunity improvements, and habitat capacity improvements-to evaluate restoration projects. Based on these criteria, an algorithm assigned SBUs by integrating potential fish density as an indicator of salmon performance. Between 2009 and 2014, the ERTG assessed SBUs for 55 proposed projects involving a total of 181 restoration actions located across 8 of 9 reaches of the CRE, largely relying on information provided in a project template based on the conceptual model, presentations, discussions with project sponsors, and site visits. Most projects restored tidal inundation to emergent wetlands, improved riparian function, and removed invasive vegetation. The scientific relationship of geomorphic and salmonid responses to restoration actions remains the foremost concern. Although not designed to establish a broad strategy for estuary restoration, the scoring process has adaptively influenced the types, designs, and locations of restoration proposals. The ERTG process may be a useful model for others who have unique ecosystem restoration goals and share some of our common challenges. Copyright © 2016 Elsevier Ltd. All rights reserved.

Using Hydraulic Modeling to Evaluate Lateral Connectivity Improvements under Alternative Restoration Scenarios in the Atchafalaya River Basin

NASA Astrophysics Data System (ADS)

Hayden-Lesmeister, A.; Remo, J. W.; Piazza, B.

2017-12-01

The Atchafalaya River (AR) in Louisiana is the principal distributary of the Mississippi River. Reach to system scale modifications on the AR and throughout its basin for regional flood mitigation, navigation, and hydrocarbon extraction have substantially altered the hydrologic connectivity between the river and its floodplain wetlands, threatening the ecological integrity of this globally-important ecosystem. Stakeholder groups agree that restoring flow connectivity is essential to maintaining the basin's water quality, and recent management efforts have focused on the 174 km2 Flat Lake Water Management Unit (WMU). Several flow-connectivity enhancement projects have been proposed by the Atchafalaya Basin Program's Technical Advisory Group, but none have been constructed. We collaborated with The Nature Conservancy and other agencies to obtain existing datasets and develop a 1D2D hydraulic model to examine whether proposed restoration projects improved lateral surface-water connectivity in the Flat Lake WMU. To do this, we employed a range of physical parameters (inundation extent, water depths, and rates of WSEL reduction) as potential indicators of improved connectivity with restoration. We ran simulations to examine two scenarios - a baseline scenario (S1) to examine current conditions (no restoration projects), and a full-implementation scenario (S2), where all restoration projects that could be examined at the model resolution were implemented. Potential indicators of improved lateral connectivity indicated that proposed projects may play an important role in improving water quality in the Flat Lake WMU. At the end of the constant-discharge portion of the run, average depths between S1 and S2 remained unchanged; however, depths and water levels were consistently lower for S2 during a drawdown. Volumetrically, up to 4.4 million m3 less water was in the Flat Lake system when projects were implemented. The results indicate that projects introduce nutrient-rich river water and improve flushing flows through backswamp areas. Our modeling approach may provide a cost-effective framework for examining the performance of proposed restoration projects along other highly-altered, low-gradient river systems.

Fostering evidence-based quality improvement for patient-centered medical homes: Initiating local quality councils to transform primary care.

PubMed

Stockdale, Susan E; Zuchowski, Jessica; Rubenstein, Lisa V; Sapir, Negar; Yano, Elizabeth M; Altman, Lisa; Fickel, Jacqueline J; McDougall, Skye; Dresselhaus, Timothy; Hamilton, Alison B

Although the patient-centered medical home endorses quality improvement principles, methods for supporting ongoing, systematic primary care quality improvement have not been evaluated. We introduced primary care quality councils at six Veterans Health Administration sites as an organizational intervention with three key design elements: (a) fostering interdisciplinary quality improvement leadership, (b) establishing a structured quality improvement process, and (c) facilitating organizationally aligned frontline quality improvement innovation. Our evaluation objectives were to (a) assess design element implementation, (b) describe implementation barriers and facilitators, and (c) assess successful quality improvement project completion and spread. We analyzed administrative records and conducted interviews with 85 organizational leaders. We developed and applied criteria for assessing design element implementation using hybrid deductive/inductive analytic techniques. All quality councils implemented interdisciplinary leadership and a structured quality improvement process, and all but one completed at least one quality improvement project and a toolkit for spreading improvements. Quality councils were perceived as most effective when service line leaders had well-functioning interdisciplinary communication. Matching positions within leadership hierarchies with appropriate supportive roles facilitated frontline quality improvement efforts. Two key resources were (a) a dedicated internal facilitator with project management, data collection, and presentation skills and (b) support for preparing customized data reports for identifying and addressing practice level quality issues. Overall, quality councils successfully cultivated interdisciplinary, multilevel primary care quality improvement leadership with accountability mechanisms and generated frontline innovations suitable for spread. Practice level performance data and quality improvement project management support were critical. In order to successfully facilitate systematic, sustainable primary care quality improvement, regional and executive health care system leaders should engage interdisciplinary practice level leadership in a priority-setting process that encourages frontline innovation and establish local structures such as quality councils to coordinate quality improvement initiatives, ensure accountability, and promote spread of best practices.

Compressor coating effects on gas turbine engine performance

DOE Office of Scientific and Technical Information (OSTI.GOV)

MacLeod, J.D.; Laflamme, J.C.

1991-10-01

In an attempt to increase the time between maintenance actions and to improve performance retention of turboprop engines installed in transport and maritime patrol aircraft, the Canadian Department of National Defence is evaluating an erosion and corrosion-resistance blade coating, for use on compressors. As coatings could appreciably alter engine performance by virtue of their application thickness and surface quality, the National Research Council of Canada was asked to quantify any performance changes that could occur. A project was initiated, utilizing a new Allison T56 turboprop engine, to assess not only the performance changes resulting from the coating, but also thosemore » from dismantling and reassembling the compressor, since the compressor must be completely disassembled to apply the coating. This paper describes the project objectives, the experimental installation, and the measured effects of the coating application on compressor performance.« less

Olkiluoto 1 and 2 - Plant efficiency improvement and lifetime extension-project (PELE) implemented during outages 2010 and 2011

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kosonen, M.; Hakola, M.

2012-07-01

Teollisuuden Voima Oyj (TVO) is a non-listed public company founded in 1969 to produce electricity for its stakeholders. TVO is the operator of the Olkiluoto nuclear power plant. TVO follows the principle of continuous improvement in the operation and maintenance of the Olkiluoto plant units. The PELE project (Plant Efficiency Improvement and Lifetime Extension), mainly completed during the annual outages in 2010 and 2011, and forms one part of the systematic development of Olkiluoto units. TVO maintains a long-term development program that aims at systematically modernizing the plant unit systems and equipment based on the latest technology. According to themore » program, the Olkiluoto 1 and Olkiluoto 2 plant units are constantly renovated with the intention of keeping them safe and reliable, The aim of the modernization projects is to improve the safety, reliability, and performance of the plant units. PELE project at Olkiluoto 1 was done in 2010 and at Olkiluoto 2 in 2011. The outage length of Olkiluoto 1 was 26 d 12 h 4 min and Olkiluoto 2 outage length was 28 d 23 h 46 min. (Normal service-outage is about 14 days including refueling and refueling-outage length is about seven days. See figure 1) The PELE project consisted of several single projects collected into one for coordinated project management. Some of the main projects were as follows: - Low pressure turbines: rotor, stator vane, casing and turbine instrumentation replacement. - Replacement of Condenser Cooling Water (later called seawater pumps) pumps - Replacement of inner isolation valves on the main steam lines. - Generator and the generator cooling system replacement. - Low voltage switchgear replacement. This project will continue during future outages. PELE was a success. 100 TVO employees and 1500 subcontractor employees participated in the project. The execution of the PELE projects went extremely well during the outages. The replacement of the low pressure turbines and seawater pumps improved the efficiency of the plant units, and a power increase of nearly 20 MW was achieved at both plant units. PELE wonderfully manifests one of the strategic goals of our company; developing the competence of our in-house personnel by working in projects. (authors)« less

Developing an Energy Performance Modeling Startup Kit

DOE Office of Scientific and Technical Information (OSTI.GOV)

none,

2012-10-01

In 2011, the NAHB Research Center began assessing the needs and motivations of residential remodelers regarding energy performance remodeling. This report outlines: the current remodeling industry and the role of energy efficiency; gaps and barriers to adding energy efficiency into remodeling; and support needs of professional remodelers to increase sales and projects involving improving home energy efficiency.

Learning Management System Calendar Reminders and Effects on Time Management and Academic Performance

ERIC Educational Resources Information Center

Mei, Jianyang

2016-01-01

This research project uses a large research university in the Midwest as a research site to explore the time management skills of international students and analyzes how using the Course Hack, an online Learning Management System (LMS) calendar tool, improves participants' time management skills and positively impacts their academic performance,…

The Beginning Lecture and the Improvement of “Experiments in Innovative Chemistry” as an Entry Subjects at the Department of Biochemistry and Applied Chemistry in National College of Technology

NASA Astrophysics Data System (ADS)

Tsuda, Yusuke; Nakashima, Hiroyuki; Tsuji, Yutaka; Watanabe, Katsuhiro; Ooka, Hisako

The beginning lecture and the improvement of “Experiments in Innovative Chemistry” as an entry subjects in the Department of Biochemistry and Applied Chemistry at Kurume National College of Technology has been performed for recent three years. Every experiment was selected to sustain the young student's interest. The questionnaires were performed after first two year's programs were finished, and some of projects were improved. This subject has a good reputation for students and teachers, and seems to be very effective for the first year students of national college of technology.

Reaping the benefits of task conflict in teams: the critical role of team psychological safety climate.

PubMed

Bradley, Bret H; Postlethwaite, Bennett E; Klotz, Anthony C; Hamdani, Maria R; Brown, Kenneth G

2012-01-01

Past research suggests that task conflict may improve team performance under certain conditions; however, we know little about these specific conditions. On the basis of prior theory and research on conflict in teams, we argue that a climate of psychological safety is one specific context under which task conflict will improve team performance. Using evidence from 117 project teams, the present research found that psychological safety climate moderates the relationship between task conflict and performance. Specifically, task conflict and team performance were positively associated under conditions of high psychological safety. The results support the conclusion that psychological safety facilitates the performance benefits of task conflict in teams. Theoretical implications and suggestions for future research are discussed.

Immediate improvement of motor function after epilepsy surgery in congenital hemiparesis.

PubMed

Pascoal, Tharick; Paglioli, Eliseu; Palmini, André; Menezes, Rafael; Staudt, Martin

2013-08-01

Hemispherectomy often leads to a loss of contralateral hand function. In some children with congenital hemiparesis, however, paretic hand function remains unchanged. An immediate improvement of hand function has never been reported. A 17-year-old boy with congenital hemiparesis and therapy-refractory seizures due to a large infarction in the territory of the middle cerebral artery underwent epilepsy surgery. Intraoperatively, electrical cortical stimulation of the affected hemisphere demonstrated preserved motor projections from the sensorimotor cortex to the (contralateral) paretic hand. A frontoparietal resection was performed, which included a complete disconnection of all motor projections originating in the sensorimotor cortex of the affected hemisphere. Surprisingly, the paretic hand showed a significant functional improvement immediately after the operation. This observation demonstrates that, in congenital hemiparesis, crossed motor projections from the affected hemisphere are not always beneficial, but can be dysfunctional, interfering with ipsilateral motor control over the paretic hand by the contralesional hemisphere. Wiley Periodicals, Inc. © 2013 International League Against Epilepsy.

Recent developments in user-job management with Ganga

NASA Astrophysics Data System (ADS)

Currie, R.; Elmsheuser, J.; Fay, R.; Owen, P. H.; Richards, A.; Slater, M.; Sutcliffe, W.; Williams, M.

2015-12-01

The Ganga project was originally developed for use by LHC experiments and has been used extensively throughout Run1 in both LHCb and ATLAS. This document describes some the most recent developments within the Ganga project. There have been improvements in the handling of large scale computational tasks in the form of a new GangaTasks infrastructure. Improvements in file handling through using a new IGangaFile interface makes handling files largely transparent to the end user. In addition to this the performance and usability of Ganga have both been addressed through the development of a new queues system allows for parallel processing of job related tasks.

Improving Conceptual Design for Launch Vehicles. The Bimese Concept: A Study of Mission and Economic Options

NASA Technical Reports Server (NTRS)

Olds, John R.; Tooley, Jeffrey

1999-01-01

This report summarizes key activities conducted in the third and final year of the cooperative agreement NCC1-229 entitled "Improving Conceptual Design for Launch Vehicles." This project has been funded by the Vehicle Analysis Branch at NASA's Langley Research Center in Hampton, VA. Work has been performed by the Space Systems Design Lab (SSDL) at the Georgia Institute of Technology, Atlanta, GA. Accomplishments during the first and second years of this project have been previously reported in annual progress reports. This report will focus on the third and final year of the three year activity.

ORAC: a modern observing system for UKIRT

NASA Astrophysics Data System (ADS)

Bridger, Alan; Wright, Gillian S.; Economou, Frossie; Tan, Min; Currie, Malcolm J.; Pickup, David A.; Adamson, Andrew J.; Rees, Nicholas P.; Purves, Maren; Kackley, Russell

2000-06-01

The steady improvement in telescope performance at UKIRT and the increase in data acquisition rates led to a strong desired for an integrated observing framework that would meet the needs of future instrumentation, as well as providing some support for existing instrumentation. Thus the Observatory Reduction and Acquisition Control (ORAC) project was created in 1997 with the goals of improving the scientific productivity in the telescope, reducing the overall ongoing support requirements, and eventually supporting the use of more flexibly scheduled observing. The project was also expected to achieve this within a tight resource allocation. In October 1999 the ORAC system was commissioned at the United Kingdom Infrared Telescope.

Bench-Scale Development of a Non-Aqueous Solvent (NAS) CO2 Capture Process for Coal-Fired Power Plants

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lail, Marty

The project aimed to advance RTI’s non-aqueous amine solvent technology by improving the solvent to reduce volatility, demonstrating long-term continuous operation at lab- (0.5 liters solvent) and bench-scale (~120 liters solvent), showing low reboiler heat duty measured during bench-scale testing, evaluating degradation products, building a rate-based process model, and evaluating the techno-economic performance of the process. The project team (RTI, SINTEF, Linde Engineering) and the technology performed well in each area of advancement. The modifications incorporated throughout the project enabled the attainment of target absorber and regenerator conditions for the process. Reboiler duties below 2,000 kJt/kg CO2 were observed inmore » a bench-scale test unit operated at RTI.« less

DOE Office of Scientific and Technical Information (OSTI.GOV)

Maurer, D.

In January 1986, the Becon Construction Company - an open-shop contractor based in Houston, Texas - mobilized a work force to a construction project location at the Belridge Oil Field, near Bakersfield, California. The construction craftsmen and helpers in Becon's work force were expected to improve their level of productivity as the work proceeded because of the knowledge and skills that they would acquire as a result of the repetitive nature of the work. As it was originally organized, the Becon HOTS project represented almost a pure laboratory environment in which to collect data concerning the learning effect on workermore » productivity as well as to statistically isolate the impact on productivity of such external factors as weather, absenteeism, turnover, and especially work methods improvement techniques and pay incentives. From the outset of the HOTS project, the project manager had established an accurate system to quantitatively measure and compare the total manhours that each crew - civil, mechanical, electrical, and prefabrication -- performed at individual HOTS construction locations. Additionally, it was initially assumed that the project manager would be relatively free to implement changes to the job site conditions involving incentive pay and work methods improvement. The subsequent effect of these changes on the productivity of separate work crews could then be evaluated in terms of measured manhours per crew per HOTS.« less

Project management: importance for diagnostic laboratories.

PubMed

Croxatto, A; Greub, G

2017-07-01

The need for diagnostic laboratories to improve both quality and productivity alongside personnel shortages incite laboratory managers to constantly optimize laboratory workflows, organization, and technology. These continuous modifications of the laboratories should be conducted using efficient project and change management approaches to maximize the opportunities for successful completion of the project. This review aims at presenting a general overview of project management with an emphasis on selected critical aspects. Conventional project management tools and models, such as HERMES, described in the literature, associated personal experience, and educational courses on management have been used to illustrate this review. This review presents general guidelines of project management and highlights their importance for microbiology diagnostic laboratories. As an example, some critical aspects of project management will be illustrated with a project of automation, as experienced at the laboratories of bacteriology and hygiene of the University Hospital of Lausanne. It is important to define clearly beforehand the objective of a project, its perimeter, its costs, and its time frame including precise duration estimates of each step. Then, a project management plan including explanations and descriptions on how to manage, execute, and control the project is necessary to continuously monitor the progression of a project to achieve its defined goals. Moreover, a thorough risk analysis with contingency and mitigation measures should be performed at each phase of a project to minimize the impact of project failures. The increasing complexities of modern laboratories mean clinical microbiologists must use several management tools including project and change management to improve the outcome of major projects and activities. Copyright © 2017 The Author(s). Published by Elsevier Ltd.. All rights reserved.

Concrete crosstie fastener sub-system testing and modeling.

DOT National Transportation Integrated Search

2014-02-10

The primary objective of this project is to identify methods of improving concrete railroad crosstie fastening system design and performance by conducting a thorough investigation of the behavior of the fastening system using Finite Element Analysis ...

Best Practices in Photovoltaic System Operations and Maintenance: 2nd Edition

DOE Office of Scientific and Technical Information (OSTI.GOV)

Whaley, Cass

This best practices guide encourages high-quality system deployment and operation that improves lifetime project performance and energy production while reducing, or at least optimizing, costs to deliver an operation and maintenance program.

Extreme-Scale Computing Project Aims to Advance Precision Oncology | FNLCR Staging

Cancer.gov

Two government agencies and five national laboratories are collaborating to develop extremely high-performance computing capabilities that will analyze mountains of research and clinical data to improve scientific understanding of cancer, predict dru

Improving the effectiveness of smart work zone technologies.

DOT National Transportation Integrated Search

2016-11-01

This project evaluates the effectiveness of sensor network systems for work zone traffic estimation. The comparative analysis is : performed on a work zone modeled in microsimulation and calibrated with field data from two Illinois work zones. Realis...

Development of safety performance monitoring procedures.

DOT National Transportation Integrated Search

2010-02-01

Highway safety is an ongoing concern to the Texas Department of Transportation (TxDOT). As part of its : proactive commitment to improving highway safety, TxDOT is moving toward including quantitative safety : analyses earlier in the project developm...

A Comprehensive Survey of Emerging Technologies for the New York Metropolitan Area

DOT National Transportation Integrated Search

2008-11-01

The increasing challenges in managing and operating transportation systems have behooved transportation agencies to consider innovative alternative technology solutions to improve transportation system performance. The goal of this project is to cond...

Internationalization Measures in Large Scale Research Projects

NASA Astrophysics Data System (ADS)

Soeding, Emanuel; Smith, Nancy

2017-04-01

Internationalization measures in Large Scale Research Projects Large scale research projects (LSRP) often serve as flagships used by universities or research institutions to demonstrate their performance and capability to stakeholders and other interested parties. As the global competition among universities for the recruitment of the brightest brains has increased, effective internationalization measures have become hot topics for universities and LSRP alike. Nevertheless, most projects and universities are challenged with little experience on how to conduct these measures and make internationalization an cost efficient and useful activity. Furthermore, those undertakings permanently have to be justified with the Project PIs as important, valuable tools to improve the capacity of the project and the research location. There are a variety of measures, suited to support universities in international recruitment. These include e.g. institutional partnerships, research marketing, a welcome culture, support for science mobility and an effective alumni strategy. These activities, although often conducted by different university entities, are interlocked and can be very powerful measures if interfaced in an effective way. On this poster we display a number of internationalization measures for various target groups, identify interfaces between project management, university administration, researchers and international partners to work together, exchange information and improve processes in order to be able to recruit, support and keep the brightest heads to your project.

Comparison of an enhanced versus a written feedback model on the management of Medicare inpatients with venous thrombosis.

PubMed

Hayes, R; Bratzler, D; Armour, B; Moore, L; Murray, C; Stevens, B R; Radford, M; Fitzgerald, D; Elward, K; Ballard, D J

2001-03-01

A multistate randomized study conducted under the Health Care Financing Administration's (HCFA's) Health Care Quality Improvement Program (HCQIP) offered the opportunity to compare the effect of a written feedback intervention (WFI) with that of an enhanced feedback intervention (EFI) on improving the anticoagulant management of Medicare beneficiaries who present to the hospital with venous thromboembolic disease. Twenty-nine hospitals in five states were randomly assigned to receive written hospital-specific feedback (WFI) of feedback enhanced by the participation of a trained physician, quality improvement tools, and an Anticoagulant Management of Venous Thrombosis (AMVT) project liaison (EFI). Differences in the performance of five quality indicators between baseline and remeasurement were assessed. Quality managers were interviewed to determine perceptions of project implementation. No significant differences in the change from baseline to remeasurement were found between the two intervention groups. Significant improvement in one indicator and significant decline in two indicators were found for one or both groups. Yet 59% of all quality managers perceived the AMVT project as being successful to very successful, and more EFI quality managers perceived success than did WFI managers (71% versus 40%). In the majority of EFI hospitals, physician liaisons played an important role in project implementation. Study results indicated that the addition of a physician liaison, quality improvement tools, and a project liaison did not provide incremental value to hospital-specific feedback for improving quality of care. Future studies with larger sample sizes, lengthier follow-up periods, and interventions that include more of the elements shown to affect practice behavior change are needed to identify an optimal feedback model for use by external quality management organizations.

Chromatographic background drift correction coupled with parallel factor analysis to resolve coelution problems in three-dimensional chromatographic data: quantification of eleven antibiotics in tap water samples by high-performance liquid chromatography coupled with a diode array detector.

PubMed

Yu, Yong-Jie; Wu, Hai-Long; Fu, Hai-Yan; Zhao, Juan; Li, Yuan-Na; Li, Shu-Fang; Kang, Chao; Yu, Ru-Qin

2013-08-09

Chromatographic background drift correction has been an important field of research in chromatographic analysis. In the present work, orthogonal spectral space projection for background drift correction of three-dimensional chromatographic data was described in detail and combined with parallel factor analysis (PARAFAC) to resolve overlapped chromatographic peaks and obtain the second-order advantage. This strategy was verified by simulated chromatographic data and afforded significant improvement in quantitative results. Finally, this strategy was successfully utilized to quantify eleven antibiotics in tap water samples. Compared with the traditional methodology of introducing excessive factors for the PARAFAC model to eliminate the effect of background drift, clear improvement in the quantitative performance of PARAFAC was observed after background drift correction by orthogonal spectral space projection. Copyright © 2013 Elsevier B.V. All rights reserved.

Error Characterization of Altimetry Measurements at Climate Scales

NASA Astrophysics Data System (ADS)

Ablain, Michael; Larnicol, Gilles; Faugere, Yannice; Cazenave, Anny; Meyssignac, Benoit; Picot, Nicolas; Benveniste, Jerome

2013-09-01

Thanks to studies performed in the framework of the SALP project (supported by CNES) since the TOPEX era and more recently in the framework of the Sea- Level Climate Change Initiative project (supported by ESA), strong improvements have been provided on the estimation of the global and regional mean sea level over the whole altimeter period for all the altimetric missions. Thanks to these efforts, a better characterization of altimeter measurements errors at climate scales has been performed and presented in this paper. These errors have been compared to user requirements in order to know if scientific goals are reached by altimeter missions. The main issue of this paper is the importance to enhance the link between altimeter and climate communities to improve or refine user requirements, to better specify future altimeter system for climate applications but also to reprocess older missions beyond their original specifications.

Lessons Learned from the Development and Implementation of the Atmosphere Resource Recovery and Environmental Monitoring Project

NASA Technical Reports Server (NTRS)

Roman, Monsi C.; Perry, Jay L.; Howard, David F.

2014-01-01

The Advanced Exploration Systems (AES) Program's Atmosphere Resource Recovery and Environmental Monitoring (ARREM) Project have been developing atmosphere revitalization and environmental monitoring subsystem architectures suitable for enabling sustained crewed exploration missions beyond low Earth orbit (LEO). Using the International Space Station state-of-the-art (SOA) as the technical basis, the ARREM Project has contributed to technical advances that improve affordability, reliability, and functional efficiency while reducing dependence on a ground-based logistics resupply model. Functional demonstrations have merged new process technologies and concepts with existing ISS developmental hardware and operate them in a controlled environment simulating various crew metabolic loads. The ARREM Project's strengths include access to a full complement of existing developmental hardware that perform all the core atmosphere revitalization functions, unique testing facilities to evaluate subsystem performance, and a coordinated partnering effort among six NASA field centers and industry partners to provide the innovative expertise necessary to succeed. A project overview is provided and the project management strategies that have enabled a multidiscipinary engineering team to work efficiently across project, NASA field center, and industry boundaries to achieve the project's technical goals are discussed. Lessons learned and best practices relating to the project are presented and discussed.

Loglines. May - June 2012

DTIC Science & Technology

2012-06-01

GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) 5d. PROJECT NUMBER 5e. TASK NUMBER 5f. WORK UNIT NUMBER 7. PERFORMING ORGANIZATION NAME(S) AND...8. PERFORMING ORGANIZATION REPORT NUMBER 9. SPONSORING/MONITORING AGENCY NAME(S) AND ADDRESS(ES) 10. SPONSOR/MONITOR’S ACRONYM(S) 11. SPONSOR...challenges, our commitment to reduce costs even as we continue to improve performance , and DLA’s enduring partnerships within and external to the Defense

Implementation and Performance of Factorized Back projection on Low-Cost Commercial-Off-the-Shelf Hardware

DTIC Science & Technology

performance on a low cost, low size, weight, and power (SWAP) computer : a Raspberry Pi Model B. For a comparison of performance, a baseline implementation...improvement factor of 2-3 compared to filtered backprojection. Execution on a single Raspberry Pi is too slow for real-time imaging. However, factorized...backprojection is easily parallelized, and we include a discussion of parallel implementation across multiple Pis .

Louisiana State Performance Plan--Part B. July 1, 2005-June 30, 2012. Under the Individuals with Disabilities Educational Improvement Act of 2004. Revised

ERIC Educational Resources Information Center

White, John

2013-01-01

Bearing in mind the requirements of No Child Left Behind (NCLB) legislation, Louisiana's Steering Committee projected performance targets through the year 2014 for the important areas of: (1) Graduation with a Diploma; (2) Dropout Rate; (3) Placement, ages 6-21 and ages 3-5; (4) Achievement Performance Levels, and (5) Discipline. Annual gains were…

Improving DOE Project Performance Using the DOD Integrated Master Plan - 12481

DOE Office of Scientific and Technical Information (OSTI.GOV)

Alleman, Glen B.; Nosbisch, Michael R.

2012-07-01

DOE O 413 measures a project's progress to plan by the consumption of funding, the passage of time, and the meeting of milestones. In March of 2003, then Under Secretary, Energy, Science, Card received a memo directing the implementation of Project Management and the Project Management Manual, including the Integrated Master Plan and Integrated Master Schedule. This directive states 'the integrated master plan and schedule tie together all project tasks by showing their logical relationships and any constraints controlling the start or finish of each task. This process results in a hierarchy of related functional and layered schedules derived frommore » the Work Breakdown Structure that can be used for monitoring and controlling project progress'. This paper shows how restoring the IMP/IMS paradigm to DOE program management increases the probability of program success in ways not currently available using DOD O 413 processes alone. Using DOE O 413 series guidance, adding the Integrated Master Plan and Integrated Master Schedule paradigm would provide a hierarchical set of performance measures for each 'package of work,' that provides measurable visibility to the increasing maturity of the project. This measurable maturity provides the mechanism to forecast future performance of cost, schedule, and technical outcomes in ways not available using just the activities in DOE O 413. With this information project managers have another tool available to address the issues identified in GAO-07-336 and GAO-09-406. (authors)« less

Engineering performance metrics

NASA Astrophysics Data System (ADS)

Delozier, R.; Snyder, N.

1993-03-01

Implementation of a Total Quality Management (TQM) approach to engineering work required the development of a system of metrics which would serve as a meaningful management tool for evaluating effectiveness in accomplishing project objectives and in achieving improved customer satisfaction. A team effort was chartered with the goal of developing a system of engineering performance metrics which would measure customer satisfaction, quality, cost effectiveness, and timeliness. The approach to developing this system involved normal systems design phases including, conceptual design, detailed design, implementation, and integration. The lessons teamed from this effort will be explored in this paper. These lessons learned may provide a starting point for other large engineering organizations seeking to institute a performance measurement system accomplishing project objectives and in achieving improved customer satisfaction. To facilitate this effort, a team was chartered to assist in the development of the metrics system. This team, consisting of customers and Engineering staff members, was utilized to ensure that the needs and views of the customers were considered in the development of performance measurements. The development of a system of metrics is no different than the development of any type of system. It includes the steps of defining performance measurement requirements, measurement process conceptual design, performance measurement and reporting system detailed design, and system implementation and integration.