performance measures based: Topics by Science.gov

Sample records for performance measures based

Performance-based measures and behavioral ratings of executive function in diagnosing attention-deficit/hyperactivity disorder in children.

PubMed

Tan, Alexander; Delgaty, Lauren; Steward, Kayla; Bunner, Melissa

2018-04-16

Deficits in real-world executive functioning (EF) are a frequent characteristic of attention-deficit/hyperactivity disorder (ADHD). However, the predictive value of using performance-based and behavioral rating measures of EF when diagnosing ADHD remains unclear. The current study investigates the use of performance-based EF measures and a parent-report questionnaire with established ecological validity and clinical utility when diagnosing ADHD. Participants included 21 healthy controls, 21 ADHD-primary inattentive, and 21 ADHD-combined type subjects aged 6-15 years. A brief neuropsychological battery was administered to each subject including common EF assessment measures. Significant differences were not found between groups on most performance-based EF measures, whereas significant differences (p < 0.05) were found on most parent-report behavioral rating scales. Furthermore, performance-based measures did not predict group membership above chance levels. Results further support differences in predictive value of EF performance-based measures compared to parent-report questionnaires when diagnosing ADHD. Further research must investigate the relationship between performance-based and behavioral rating measures when assessing EF in ADHD.
45 CFR 270.4 - On what measures will we base the bonus awards?

Code of Federal Regulations, 2010 CFR

2010-10-01

... PERFORMANCE BONUS AWARDS § 270.4 On what measures will we base the bonus awards? (a) Performance measures: general. In FY 2002 and beyond, we will base the high performance bonus awards on: four work measures; five measures that support work and self-sufficiency related to participation by low-income working...
An official American thoracic society workshop report: developing performance measures from clinical practice guidelines.

PubMed

Kahn, Jeremy M; Gould, Michael K; Krishnan, Jerry A; Wilson, Kevin C; Au, David H; Cooke, Colin R; Douglas, Ivor S; Feemster, Laura C; Mularski, Richard A; Slatore, Christopher G; Wiener, Renda Soylemez

2014-05-01

Many health care performance measures are either not based on high-quality clinical evidence or not tightly linked to patient-centered outcomes, limiting their usefulness in quality improvement. In this report we summarize the proceedings of an American Thoracic Society workshop convened to address this problem by reviewing current approaches to performance measure development and creating a framework for developing high-quality performance measures by basing them directly on recommendations from well-constructed clinical practice guidelines. Workshop participants concluded that ideally performance measures addressing care processes should be linked to clinical practice guidelines that explicitly rate the quality of evidence and the strength of recommendations, such as the Grading of Recommendations Assessment, Development, and Evaluation (GRADE) process. Under this framework, process-based performance measures would only be developed from strong recommendations based on high- or moderate-quality evidence. This approach would help ensure that clinical processes specified in performance measures are both of clear benefit to patients and supported by strong evidence. Although this approach may result in fewer performance measures, it would substantially increase the likelihood that quality-improvement programs based on these measures actually improve patient care.
Chief Complaint-Based Performance Measures: A New Focus For Acute Care Quality Measurement

PubMed Central

Griffey, Richard T; Pines, Jesse M.; Farley, Heather L.; Phelan, Michael P; Beach, Christopher; Schuur, Jeremiah D; Venkatesh, Arjun K.

2014-01-01

Performance measures are increasingly important to guide meaningful quality improvement efforts and value-based reimbursement. Populations included in most current hospital performance measures are defined by recorded diagnoses using International Disease Classification (ICD)-9 codes in administrative claims data. While the diagnosis-centric approach allows the assessment of disease-specific quality, it fails to measure one of the primary functions of emergency department (ED) care which involves diagnosing, risk-stratifying, and treating patients’ potentially life-threatening conditions based on symptoms (i.e. chief complaints). In this paper we propose chief complaint-based quality measures as a means to enhance the evaluation of quality and value in emergency care. We discuss the potential benefits of chief-complaint based measures, describe opportunities to mitigate challenges, propose an example measure set, and present several recommendations to advance this paradigm in ED-based performance measurement. PMID:25443989
A meta-analytic review of self-reported, clinician-rated, and performance-based motivation measures in schizophrenia: Are we measuring the same "stuff"?

PubMed

Luther, Lauren; Firmin, Ruth L; Lysaker, Paul H; Minor, Kyle S; Salyers, Michelle P

2018-04-07

An array of self-reported, clinician-rated, and performance-based measures has been used to assess motivation in schizophrenia; however, the convergent validity evidence for these motivation assessment methods is mixed. The current study is a series of meta-analyses that summarize the relationships between methods of motivation measurement in 45 studies of people with schizophrenia. The overall mean effect size between self-reported and clinician-rated motivation measures (r = 0.27, k = 33) was significant, positive, and approaching medium in magnitude, and the overall effect size between performance-based and clinician-rated motivation measures (r = 0.21, k = 11) was positive, significant, and small in magnitude. The overall mean effect size between self-reported and performance-based motivation measures was negligible and non-significant (r = -0.001, k = 2), but this meta-analysis was underpowered. Findings suggest modest convergent validity between clinician-rated and both self-reported and performance-based motivation measures, but additional work is needed to clarify the convergent validity between self-reported and performance-based measures. Further, there is likely more variability than similarity in the underlying construct that is being assessed across the three methods, particularly between the performance-based and other motivation measurement types. These motivation assessment methods should not be used interchangeably, and measures should be more precisely described as the specific motivational construct or domain they are capturing. Copyright © 2018 Elsevier Ltd. All rights reserved.
Review of the Community College System's Performance-Based Program Budgeting Measures and Incentive Fund. Report 97-49.

ERIC Educational Resources Information Center

Florida State Legislature, Tallahassee. Office of Program Policy Analysis and Government Accountability.

This report addresses the Florida Community College System's (FCCS) performance based on measures established by the General Appropriations Act. Discussed are: (1) FCCS' performance on the measures used in the performance-based budgeting (PBB) incentive fund; (2) improvements that can be made to the PBB incentive fund; and (3) changes to community…
An Experimental Study on the Iso-Content-Based Angle Similarity Measure.

ERIC Educational Resources Information Center

Zhang, Jin; Rasmussen, Edie M.

2002-01-01

Retrieval performance of the iso-content-based angle similarity measure within the angle, distance, conjunction, disjunction, and ellipse retrieval models is compared with retrieval performance of the distance similarity measure and the angle similarity measure. Results show the iso-content-based angle similarity measure achieves satisfactory…
Performance measurement and modeling of component applications in a high performance computing environment : a case study.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Armstrong, Robert C.; Ray, Jaideep; Malony, A.

2003-11-01

We present a case study of performance measurement and modeling of a CCA (Common Component Architecture) component-based application in a high performance computing environment. We explore issues peculiar to component-based HPC applications and propose a performance measurement infrastructure for HPC based loosely on recent work done for Grid environments. A prototypical implementation of the infrastructure is used to collect data for a three components in a scientific application and construct performance models for two of them. Both computational and message-passing performance are addressed.
A knowledge based search tool for performance measures in health care systems.

PubMed

Beyan, Oya D; Baykal, Nazife

2012-02-01

Performance measurement is vital for improving the health care systems. However, we are still far from having accepted performance measurement models. Researchers and developers are seeking comparable performance indicators. We developed an intelligent search tool to identify appropriate measures for specific requirements by matching diverse care settings. We reviewed the literature and analyzed 229 performance measurement studies published after 2000. These studies are evaluated with an original theoretical framework and stored in the database. A semantic network is designed for representing domain knowledge and supporting reasoning. We have applied knowledge based decision support techniques to cope with uncertainty problems. As a result we designed a tool which simplifies the performance indicator search process and provides most relevant indicators by employing knowledge based systems.
Nonlinearity analysis of measurement model for vision-based optical navigation system

NASA Astrophysics Data System (ADS)

Li, Jianguo; Cui, Hutao; Tian, Yang

2015-02-01

In the autonomous optical navigation system based on line-of-sight vector observation, nonlinearity of measurement model is highly correlated with the navigation performance. By quantitatively calculating the degree of nonlinearity of the focal plane model and the unit vector model, this paper focuses on determining which optical measurement model performs better. Firstly, measurement equations and measurement noise statistics of these two line-of-sight measurement models are established based on perspective projection co-linearity equation. Then the nonlinear effects of measurement model on the filter performance are analyzed within the framework of the Extended Kalman filter, also the degrees of nonlinearity of two measurement models are compared using the curvature measure theory from differential geometry. Finally, a simulation of star-tracker-based attitude determination is presented to confirm the superiority of the unit vector measurement model. Simulation results show that the magnitude of curvature nonlinearity measurement is consistent with the filter performance, and the unit vector measurement model yields higher estimation precision and faster convergence properties.
Development of Sensor-Based Measures of Rifle Marksmanship Skill and Performance. CRESST Report 756

ERIC Educational Resources Information Center

Espinosa, Paul D.; Nagashima, Sam O.; Chung, Gregory K. W. K.; Parks, Daniel; Baker, Eva L.

2009-01-01

Measures of rifle marksmanship skill and performance were developed using a prototype instrumented laser-based training system. Measures of performance were derived from laser strikes on a video-projected target. Measures of rifle marksmanship skill--breath control, trigger control, and muzzle wobble--were developed from shooters' breathing and…
Evaluation of audit-based performance measures for dental care plans.

PubMed

Bader, J D; Shugars, D A; White, B A; Rindal, D B

1999-01-01

Although a set of clinical performance measures, i.e., a report card for dental plans, has been designed for use with administrative data, most plans do not have administrative data systems containing the data needed to calculate the measures. Therefore, we evaluated the use of a set of proxy clinical performance measures calculated from data obtained through chart audits. Chart audits were conducted in seven dental programs--three public health clinics, two dental health maintenance organizations (DHMO), and two preferred provider organizations (PPO). In all instances audits were completed by clinical staff who had been trained using telephone consultation and a self-instructional audit manual. The performance measures were calculated for the seven programs, audit reliability was assessed in four programs, and for one program the audit-based proxy measures were compared to the measures calculated using administrative data. The audit-based measures were sensitive to known differences in program performance. The chart audit procedures yielded reasonably reliable data. However, missing data in patient charts rendered the calculation of some measures problematic--namely, caries and periodontal disease assessment and experience. Agreement between administrative and audit-based measures was good for most, but not all, measures in one program. The audit-based proxy measures represent a complex but feasible approach to the calculation of performance measures for those programs lacking robust administrative data systems. However, until charts contain more complete diagnostic information (i.e., periodontal charting and diagnostic codes or reason-for-treatment codes), accurate determination of these aspects of clinical performance will be difficult.
Error Rates in Measuring Teacher and School Performance Based on Student Test Score Gains. NCEE 2010-4004

ERIC Educational Resources Information Center

Schochet, Peter Z.; Chiang, Hanley S.

2010-01-01

This paper addresses likely error rates for measuring teacher and school performance in the upper elementary grades using value-added models applied to student test score gain data. Using realistic performance measurement system schemes based on hypothesis testing, we develop error rate formulas based on OLS and Empirical Bayes estimators.…
Cognitive Correlates of Functional Abilities in Individuals with Mild Cognitive Impairment: Comparison of Questionnaire, Direct Observation and Performance-based Measures

PubMed Central

Schmitter-Edgecombe, Maureen; Parsey, Carolyn M.

2014-01-01

The relationship between and the cognitive correlates of several proxy measures of functional status were studied in a population with mild cognitive impairment (MCI). Participants were 51 individuals diagnosed with MCI and 51 cognitively healthy older adults (OA). Participants completed performance-based functional status tests, standardized neuropsychological tests, and performed eight activities of daily living (e.g., watered plants, filled medication dispenser) while under direct observation in a campus apartment. An informant interview about everyday functioning was also conducted. Compared to the OA control group, the MCI group performed more poorly on all proxy measures of everyday functioning. The informant-report of instrumental activities of daily living (IADL) did not correlate with the two performance-based measures; however, both the informant-report IADL and the performance-based everyday problem-solving test correlated with the direct observation measure. After controlling for age and education, cognitive predictors did not explain a significant amount of variance in the performance-based measures; however, performance on a delayed memory task was a unique predictor for the informant-report IADL, and processing speed predicted unique variance for the direct observation score. These findings indicate that differing methods for evaluating functional status are not assessing completely overlapping aspects of everyday functioning in the MCI population. PMID:24766574
Cognitive correlates of functional abilities in individuals with mild cognitive impairment: comparison of questionnaire, direct observation, and performance-based measures.

PubMed

Schmitter-Edgecombe, Maureen; Parsey, Carolyn M

2014-01-01

The relationship between, and the cognitive correlates of, several proxy measures of functional status were studied in a population with mild cognitive impairment (MCI). Participants were 51 individuals diagnosed with MCI and 51 cognitively healthy older adults (OA). Participants completed performance-based functional status tests and standardized neuropsychological tests, and performed eight activities of daily living (e.g., watered plants, filled medication dispenser) while under direct observation in a campus apartment. An informant interview about everyday functioning was also conducted. Compared to the OA control group, the MCI group performed more poorly on all proxy measures of everyday functioning. The informant report of instrumental activities of daily living (IADL) did not correlate with the two performance-based measures; however, both the informant-report IADL and the performance-based everyday problem-solving test correlated with the direct observation measure. After controlling for age and education, cognitive predictors did not explain a significant amount of variance in the performance-based measures; however, performance on a delayed memory task was a unique predictor for the informant-report IADL, and processing speed predicted unique variance for the direct observation score. These findings indicate that differing methods for evaluating functional status are not assessing completely overlapping aspects of everyday functioning in the MCI population.
Predictors of performance-based measures of instrumental activities of daily living in nondemented patients with Parkinson's disease.

PubMed

Pirogovsky, Eva; Martinez-Hannon, Mercedes; Schiehser, Dawn M; Lessig, Stephanie L; Song, David D; Litvan, Irene; Filoteo, J Vincent

2013-01-01

Few studies have examined instrumental activities of daily living (iADLs) in nondemented Parkinson's disease (PD), and the majority of these studies have used report-based measures, which can have limited validity. The present study had two main goals: (a) to examine the performance of nondemented PD patients on two performance-based measures of iADLs, which are considered more objective functional measures, and (b) to examine the cognitive, motor, and psychiatric correlates of iADL impairment in PD. Ninety-eight nondemented PD patients and 47 healthy older adults were administered performance-based measures that assess the ability to manage medications (Medication Management Ability Assessment) and finances (University of California, San Diego, UCSD, Performance-based Skills Assessment), the Mattis Dementia Rating Scale to assess global cognitive functioning, the Unified Parkinson's Disease Rating Scale Part III to assess motor symptom severity, and the Geriatric Depression Scale to assess depressive symptoms. Nondemented PD patients demonstrated significantly impaired scores relative to the healthy comparison group on the performance-based measure of financial management, but there were no significant group differences in medication management. Global cognitive functioning, motor severity, and depressive symptoms did not correlate with scores on either of the functional measures, except for a small correlation between depressive symptoms and financial management. The two performance-based measures of iADL functioning did not correlate with one another. These findings suggest that medication and financial management may not be predicted based on global cognitive functioning and that iADLs may not be represented by a single construct. Furthermore, these findings suggest the potential need for a multidimensional approach to assessing iADLs.
Optical fiber-based system for continuous measurement of in-bore projectile velocity.

PubMed

Wang, Guohua; Sun, Jinglin; Li, Qiang

2014-08-01

This paper reports the design of an optical fiber-based velocity measurement system and its application in measuring the in-bore projectile velocity. The measurement principle of the implemented system is based on Doppler effect and heterodyne detection technique. The analysis of the velocity measurement principle deduces the relationship between the projectile velocity and the instantaneous frequency (IF) of the optical fiber-based system output signal. To extract the IF of the fast-changing signal carrying the velocity information, an IF extraction algorithm based on the continuous wavelet transforms is detailed. Besides, the performance of the algorithm is analyzed by performing corresponding simulation. At last, an in-bore projectile velocity measurement experiment with a sniper rifle having a 720 m/s muzzle velocity is performed to verify the feasibility of the optical fiber-based velocity measurement system. Experiment results show that the measured muzzle velocity is 718.61 m/s, and the relative uncertainty of the measured muzzle velocity is approximately 0.021%.
Optical fiber-based system for continuous measurement of in-bore projectile velocity

NASA Astrophysics Data System (ADS)

Wang, Guohua; Sun, Jinglin; Li, Qiang

2014-08-01

This paper reports the design of an optical fiber-based velocity measurement system and its application in measuring the in-bore projectile velocity. The measurement principle of the implemented system is based on Doppler effect and heterodyne detection technique. The analysis of the velocity measurement principle deduces the relationship between the projectile velocity and the instantaneous frequency (IF) of the optical fiber-based system output signal. To extract the IF of the fast-changing signal carrying the velocity information, an IF extraction algorithm based on the continuous wavelet transforms is detailed. Besides, the performance of the algorithm is analyzed by performing corresponding simulation. At last, an in-bore projectile velocity measurement experiment with a sniper rifle having a 720 m/s muzzle velocity is performed to verify the feasibility of the optical fiber-based velocity measurement system. Experiment results show that the measured muzzle velocity is 718.61 m/s, and the relative uncertainty of the measured muzzle velocity is approximately 0.021%.
Patient-reported outcome measures versus inertial performance-based outcome measures: A prospective study in patients undergoing primary total knee arthroplasty.

PubMed

Bolink, S A A N; Grimm, B; Heyligers, I C

2015-12-01

Outcome assessment of total knee arthroplasty (TKA) by subjective patient reported outcome measures (PROMs) may not fully capture the functional (dis-)abilities of relevance. Objective performance-based outcome measures could provide distinct information. An ambulant inertial measurement unit (IMU) allows kinematic assessment of physical performance and could potentially be used for routine follow-up. To investigate the responsiveness of IMU measures in patients following TKA and compare outcomes with conventional PROMs. Patients with end stage knee OA (n=20, m/f=7/13; age=67.4 standard deviation 7.7 years) were measured preoperatively and one year postoperatively. IMU measures were derived during gait, sit-stand transfers and block step-up transfers. PROMs were assessed by using the Western Ontario and McMaster Universities Osteoarthritis Index (WOMAC) and Knee Society Score (KSS). Responsiveness was calculated by the effect size, correlations were calculated with Spearman's rho correlation coefficient. One year after TKA, patients performed significantly better at gait, sit-to-stand transfers and block step-up transfers. Measures of time and kinematic IMU measures demonstrated significant improvements postoperatively for each performance-based test. The largest improvement was found in block step-up transfers (effect size=0.56-1.20). WOMAC function score and KSS function score demonstrated moderate correlations (Spearman's rho=0.45-0.74) with some of the physical performance-based measures pre- and postoperatively. To characterize the changes in physical function after TKA, PROMs could be supplemented by performance-based measures, assessing function during different activities and allowing kinematic characterization with an ambulant IMU. Copyright © 2015 Elsevier B.V. All rights reserved.
Performance-Based Measurement: Action for Organizations and HPT Accountability

ERIC Educational Resources Information Center

Larbi-Apau, Josephine A.; Moseley, James L.

2010-01-01

Basic measurements and applications of six selected general but critical operational performance-based indicators--effectiveness, efficiency, productivity, profitability, return on investment, and benefit-cost ratio--are presented. With each measurement, goals and potential impact are explored. Errors, risks, limitations to measurements, and a…

Executive Function Subcomponents and their Relations to Everyday Functioning in Healthy Older Adults

PubMed Central

McAlister, Courtney; Schmitter-Edgecombe, Maureen

2016-01-01

Everyday functioning and its executive functioning cognitive correlates (i.e., switching, inhibition, and updating) were investigated in healthy older adults (HOAs) using multiple methods of functional status. In addition to whether computerized experimental tasks would better dissociate these subcomponents than neuropsychological measures of executive functioning, we were also interested in the contributions of both experimental and neuropsychological measures of executive function subcomponents to functional abilities. Seventy HOAs (45 young-old and 25 old-old) and 70 younger adults completed executive function and neuropsychological tests. In addition to self- and informant questionnaires of functional abilities, HOAs completed two performance-based measures. An aging effect was found on all executive function measures. Old-old older adults and their informants did not report more functional difficulties but demonstrated more difficulties on performance-based measures relative to young-old participants. For the HOAs, after controlling for age and education, the neuropsychological measures of executive functioning, but not experimental measures, explained a significant amount of variance in the informant-report and both performance-based measures. Updating measures differentially predicted performance-based measures, while switching was important for questionnaire and performance-based measures. The contribution of executive functioning to functional status when measured with experimental measures specifically designed to isolate the executive subcomponent was not as strong as hypothesized. Further research examining the value of isolating executive function subcomponents in neuropsychological assessment and the prediction of functional abilities in older adults is warranted. PMID:27206842
Executive function subcomponents and their relations to everyday functioning in healthy older adults.

PubMed

McAlister, Courtney; Schmitter-Edgecombe, Maureen

2016-10-01

Everyday functioning and its executive functioning cognitive correlates (i.e., switching, inhibition, and updating) were investigated in healthy older adults (HOAs) using multiple methods of functional status. In addition to whether computerized experimental tasks would better dissociate these subcomponents than neuropsychological measures of executive functioning, we were also interested in the contributions of both experimental and neuropsychological measures of executive function subcomponents to functional abilities. Seventy HOAs (45 young-old and 25 old-old) and 70 younger adults completed executive function and neuropsychological tests. In addition to self- and informant questionnaires of functional abilities, HOAs completed two performance-based measures. An aging effect was found on all executive function measures. Old-old older adults and their informants did not report more functional difficulties but demonstrated more difficulties on performance-based measures than did young-old participants. For the HOAs, after controlling for age and education, the neuropsychological measures of executive functioning, but not experimental measures, explained a significant amount of variance in the informant-report and both performance-based measures. Updating measures differentially predicted performance-based measures, while switching was important for questionnaire and performance-based measures. The contribution of executive functioning to functional status when measured with experimental measures specifically designed to isolate the executive subcomponent was not as strong as hypothesized. Further research examining the value of isolating executive function subcomponents in neuropsychological assessment and the prediction of functional abilities in older adults is warranted.
Psychometric Properties of Performance-based Measurements of Functional Capacity: Test-Retest Reliability, Practice Effects, and Potential Sensitivity to Change

PubMed Central

Leifker, Feea R.; Patterson, Thomas L.; Bowie, Christopher R.; Mausbach, Brent T.; Harvey, Philip D.

2010-01-01

Performance-based measures of the ability to perform social and everyday living skills are being more widely used to assess functional capacity in people with serious mental illnesses such as schizophrenia and bipolar disorder. Since they are also being used as outcome measures in pharmacological and cognitive remediation studies aimed at cognitive impairments in schizophrenia, understanding their measurement properties and potential sensitivity to change is important. In this study, the test-retest reliability, practice effects, and reliable change indices of two different performance-based functional capacity measures, the UCSD Performance-based skills assessment (UPSA) and Social skills performance assessment (SSPA) were examined over several different retest intervals in two different samples of people with schizophrenia (n’s=238 and 116) and a healthy comparison sample (n=109). These psychometric properties were compared to those of a neuropsychological assessment battery. Test-retest reliabilities of the long form of the UPSA ranged from r=.63 to r=.80 over follow-up periods up to 36 months in people with schizophrenia, while brief UPSA reliabilities ranged from r=.66 to r=.81. Test-retest reliability of the NP performance scores ranged from r=.77 to r=.79. Test-retest reliabilities of the UPSA were lower in healthy controls, while NP performance was slightly more reliable. SSPA test-retest reliability was lower. Practice effect sizes ranged from .05 to .16 for the UPSA and .07 to .19 for the NP assessment in patients, with HC having more practice effects. Reliable change intervals were consistent across NP and both FC measures, indicating equal potential for detection of change. These performance-based measures of functional capacity appear to have similar potential to be sensitive to change compared to NP performance in people with schizophrenia. PMID:20399613
Unobtrusive measurement of indoor energy expenditure using an infrared sensor-based activity monitoring system.

PubMed

Hwang, Bosun; Han, Jonghee; Choi, Jong Min; Park, Kwang Suk

2008-11-01

The purpose of this study was to develop an unobtrusive energy expenditure (EE) measurement system using an infrared (IR) sensor-based activity monitoring system to measure indoor activities and to estimate individual quantitative EE. IR-sensor activation counts were measured with a Bluetooth-based monitoring system and the standard EE was calculated using an established regression equation. Ten male subjects participated in the experiment and three different EE measurement systems (gas analyzer, accelerometer, IR sensor) were used simultaneously in order to determine the regression equation and evaluate the performance. As a standard measurement, oxygen consumption was simultaneously measured by a portable metabolic system (Metamax 3X, Cortex, Germany). A single room experiment was performed to develop a regression model of the standard EE measurement from the proposed IR sensor-based measurement system. In addition, correlation and regression analyses were done to compare the performance of the IR system with that of the Actigraph system. We determined that our proposed IR-based EE measurement system shows a similar correlation to the Actigraph system with the standard measurement system.
Curriculum-Based Measurement in Science Learning: Vocabulary-Matching as an Indicator of Performance and Progress

ERIC Educational Resources Information Center

Espin, Christine A.; Busch, Todd W.; Lembke, Erica S.; Hampton, David D.; Seo, Kyounghee; Zukowski, Beth A.

2013-01-01

The technical adequacy of curriculum-based measures in the form of short and simple vocabulary-matching probes to predict students' performance and progress in science at the secondary level was investigated. Participants were 198 seventh-grade students from 10 science classrooms. Curriculum-based measurements (CBM) were 5-min vocabulary-matching…
Curriculum-Based Measurement, Program Development, Graphing Performance and Increasing Efficiency.

ERIC Educational Resources Information Center

Deno, Stanley L.; And Others

1987-01-01

Four brief articles look at aspects of curriculum based measurement (CBM) for academically handicapped students including procedures of CBM with examples, different approaches to graphing student performance, and solutions to the problem of making time to measure student progress frequently. (DB)
The effects of kinesiotape on athletic-based performance outcomes in healthy, active individuals: a literature synthesis

PubMed Central

Drouin, Jillian L.; McAlpine, Caitlin T.; Primak, Kari A.; Kissel, Jaclyn

2013-01-01

Context: The effect of the application of kinesiotape to skin overlying musculature on measurable athletic-based performance outcomes in healthy individuals has not been well established. Objective: To systematically search and assess the quality of the literature on the effect of kinesiotape on athletic-based performance outcomes in healthy, active individuals. Methods: An electronic search strategy was conducted in MANTIS, Cochrane Library and EBSCO databases. Retrieved articles that met the eligibility criteria were rated for methodological quality by using an adaption of the critical appraisal criteria in Clinical Epidemiology by Sackett et al. Results: Ten articles met the inclusion criteria. Seven articles had positive results in at least one athletic-based performance measure compared to controls. Conclusion: Evidence is lacking to support the use of kinesiotape as a successful measure for improving athletic-based performance outcomes in healthy individuals. However, there is no evidence to show that kinesiotape has a negative effect on any of the performace measures. PMID:24302784
The Utility of Curriculum-Based Measurement within a Multitiered Framework: Establishing Cut Scores as Predictors of Student Performance on the Alaska Standards-Based Assessment

ERIC Educational Resources Information Center

Legg, David E.

2013-01-01

The purpose of this study was to explore the relationship between student performance on Reading Curriculum-based Measures (R-CBM) and student performance on the Alaska's standards based assessment (SBA) administered to students in Studied School District (SSD) Grade 3 through Grade 5 students in the Studied School District as required by…
Exploring the relationships among performance-based functional ability, self-rated disability, perceived instrumental support, and depression: a structural equation model analysis.

PubMed

Weil, Joyce; Hutchinson, Susan R; Traxler, Karen

2014-11-01

Data from the Women's Health and Aging Study were used to test a model of factors explaining depressive symptomology. The primary purpose of the study was to explore the association between performance-based measures of functional ability and depression and to examine the role of self-rated physical difficulties and perceived instrumental support in mediating the relationship between performance-based functioning and depression. The inclusion of performance-based measures allows for the testing of functional ability as a clinical precursor to disability and depression: a critical, but rarely examined, association in the disablement process. Structural equation modeling supported the overall fit of the model and found an indirect relationship between performance-based functioning and depression, with perceived physical difficulties serving as a significant mediator. Our results highlight the complementary nature of performance-based and self-rated measures and the importance of including perception of self-rated physical difficulties when examining depression in older persons. © The Author(s) 2014.
Evaluation of the Relationship between Literacy and Mathematics Skills as Assessed by Curriculum-Based Measures

ERIC Educational Resources Information Center

Rutherford-Becker, Kristy J.; Vanderwood, Michael L.

2009-01-01

The purpose of this study was to evaluate the extent that reading performance (as measured by curriculum-based measures [CBM] of oral reading fluency [ORF] and Maze reading comprehension), is related to math performance (as measured by CBM math computation and applied math). Additionally, this study examined which of the two reading measures was a…
Differentiation and Exploration of Model MACP for HE VER 1.0 on Prototype Performance Measurement Application for Higher Education

NASA Astrophysics Data System (ADS)

El Akbar, R. Reza; Anshary, Muhammad Adi Khairul; Hariadi, Dennis

2018-02-01

Model MACP for HE ver.1. Is a model that describes how to perform measurement and monitoring performance for Higher Education. Based on a review of the research related to the model, there are several parts of the model component to develop in further research, so this research has four main objectives. The first objective is to differentiate the CSF (critical success factor) components in the previous model, the two key KPI (key performance indicators) exploration in the previous model, the three based on the previous objective, the new and more detailed model design. The final goal is the fourth designed prototype application for performance measurement in higher education, based on a new model created. The method used is explorative research method and application design using prototype method. The results of this study are first, forming a more detailed new model for measurement and monitoring of performance in higher education, differentiation and exploration of the Model MACP for HE Ver.1. The second result compiles a dictionary of college performance measurement by re-evaluating the existing indicators. The third result is the design of prototype application of performance measurement in higher education.
Curriculum-Based Measurement Performance Indicators: A Tool for Undergraduate Calculus Students to Inform and Direct Their Learning Behavior

ERIC Educational Resources Information Center

Sturges, Linda W.

2010-01-01

The present study investigated the extent to which providing students with individualized performance feedback informed and directed their learning behavior. Individualized performance feedback was delivered to students using curriculum-based measurement progress indicators, either as a visual representation of ongoing performance in the form of a…
Measurement properties of performance-based measures to assess physical function in hip and knee osteoarthritis: a systematic review.

PubMed

Dobson, F; Hinman, R S; Hall, M; Terwee, C B; Roos, E M; Bennell, K L

2012-12-01

To systematically review the measurement properties of performance-based measures to assess physical function in people with hip and/or knee osteoarthritis (OA). Electronic searches were performed in MEDLINE, CINAHL, Embase, and PsycINFO up to the end of June 2012. Two reviewers independently rated measurement properties using the consensus-based standards for the selection of health status measurement instrument (COSMIN). "Best evidence synthesis" was made using COSMIN outcomes and the quality of findings. Twenty-four out of 1792 publications were eligible for inclusion. Twenty-one performance-based measures were evaluated including 15 single-activity measures and six multi-activity measures. Measurement properties evaluated included internal consistency (three measures), reliability (16 measures), measurement error (14 measures), validity (nine measures), responsiveness (12 measures) and interpretability (three measures). A positive rating was given to only 16% of possible measurement ratings. Evidence for the majority of measurement properties of tests reported in the review has yet to be determined. On balance of the limited evidence, the 40 m self-paced test was the best rated walk test, the 30 s-chair stand test and timed up and go test were the best rated sit to stand tests, and the Stratford battery, Physical Activity Restrictions and Functional Assessment System were the best rated multi-activity measures. Further good quality research investigating measurement properties of performance measures, including responsiveness and interpretability in people with hip and/or knee OA, is needed. Consensus on which combination of measures will best assess physical function in people with hip/and or knee OA is urgently required. Crown Copyright © 2012. Published by Elsevier Ltd. All rights reserved.
Development of balanced key performance indicators for emergency departments strategic dashboards following analytic hierarchical process.

PubMed

Safdari, Reza; Ghazisaeedi, Marjan; Mirzaee, Mahboobeh; Farzi, Jebrail; Goodini, Azadeh

2014-01-01

Dynamic reporting tools, such as dashboards, should be developed to measure emergency department (ED) performance. However, choosing an effective balanced set of performance measures and key performance indicators (KPIs) is a main challenge to accomplish this. The aim of this study was to develop a balanced set of KPIs for use in ED strategic dashboards following an analytic hierarchical process. The study was carried out in 2 phases: constructing ED performance measures based on balanced scorecard perspectives and incorporating them into analytic hierarchical process framework to select the final KPIs. The respondents placed most importance on ED internal processes perspective especially on measures related to timeliness and accessibility of care in ED. Some measures from financial, customer, and learning and growth perspectives were also selected as other top KPIs. Measures of care effectiveness and care safety were placed as the next priorities too. The respondents placed least importance on disease-/condition-specific "time to" measures. The methodology can be presented as a reference model for development of KPIs in various performance related areas based on a consistent and fair approach. Dashboards that are designed based on such a balanced set of KPIs will help to establish comprehensive performance measurements and fair benchmarks and comparisons.
Quantum Standard Teleportation Based on the Generic Measurement Bases

NASA Astrophysics Data System (ADS)

Hao, San-Ru; Hou, Bo-Yu; Xi, Xiao-Qiang; Yue, Rui-Hong

2003-10-01

We study the quantum standard teleportation based on the generic measurement bases. It is shown that the quantum standard teleportation does not depend on the explicit expression of the measurement bases. We have given the correspondence relation between the measurement performed by Alice and the unitary transformation performed by Bob. We also prove that the single particle unknown states and the two-particle unknown cat-like states can be exactly transmitted by means of the generic measurement bases and the correspondence unitary transformations. The project supported in part by National Natural Science Foundation of China, the Hunan Provincial Natural Science Foundation of China, and the Scientific Research Fund of Hunan Provincial Education Department
Economic method for helical gear flank surface characterisation

NASA Astrophysics Data System (ADS)

Koulin, G.; Reavie, T.; Frazer, R. C.; Shaw, B. A.

2018-03-01

Typically the quality of a gear pair is assessed based on simplified geometric tolerances which do not always correlate with functional performance. In order to identify and quantify functional performance based parameters, further development of the gear measurement approach is required. Methodology for interpolation of the full active helical gear flank surface, from sparse line measurements, is presented. The method seeks to identify the minimum number of line measurements required to sufficiently characterise an active gear flank. In the form ground gear example presented, a single helix and three profile line measurements was considered to be acceptable. The resulting surfaces can be used to simulate the meshing engagement of a gear pair and therefore provide insight into functional performance based parameters. Therefore the assessment of the quality can be based on the predicted performance in the context of an application.
The Relationship between Video Game Use and a Performance-Based Measure of Persistence

ERIC Educational Resources Information Center

Ventura, Matthew; Shute, Valerie; Zhao, Weinan

2013-01-01

An online performance-based measure of persistence was developed using anagrams and riddles. Persistence was measured by recording the time spent on unsolved anagrams and riddles. Time spent on unsolved problems was correlated to a self-report measure of persistence. Additionally, frequent video game players spent longer times on unsolved problems…
Normalized knee-extension strength or leg-press power after fast-track total knee arthroplasty: which measure is most closely associated with performance-based and self-reported function?

PubMed

Aalund, Peter K; Larsen, Kristian; Hansen, Torben B; Bandholm, Thomas

2013-02-01

To investigate which of the 2 muscle-impairment measures for the operated leg, normalized knee extension strength or leg press power, was most closely associated with performance-based and self-reported measures of function shortly after total knee arthroplasty (TKA). Cross-sectional, exploratory study. Laboratory at a regional hospital. Individuals (N=39) with an average age ± SD of 65.5±10.3 years, who all had unilateral TKA 28 days prior. None. The patients performed maximal isometric knee extensions and dynamic leg presses to determine their body-mass normalized knee extension strength and leg press power, respectively. The 10-meter fast speed walking- and 30-second chair stand tests were used to determine performance-based function, while the Western Ontario and McMaster Universities Osteoarthritis Index and Oxford Knee Scores were used to determine self-reported function. Normalized leg press power was more closely associated with both performance-based (r=.82, P<.001) and self-reported (r=.48, P=.002) measures of function compared with normalized knee extension strength (r=.51, P=.001 and r=.39, P=.015, respectively). Normalized leg press power was more closely associated with both performance-based and self-reported function early after TKA than normalized knee extension strength. It may be explained by the fact that performance-based measures of function are typically closed kinetic chain tasks, such as walking or rising from a chair, and self-reported measures of function typically include questions that address perceived difficulty with performing these same tasks. Copyright © 2013 American Congress of Rehabilitation Medicine. Published by Elsevier Inc. All rights reserved.
Study on Practical Application of Turboprop Engine Condition Monitoring and Fault Diagnostic System Using Fuzzy-Neuro Algorithms

NASA Astrophysics Data System (ADS)

Kong, Changduk; Lim, Semyeong; Kim, Keunwoo

2013-03-01

The Neural Networks is mostly used to engine fault diagnostic system due to its good learning performance, but it has a drawback due to low accuracy and long learning time to build learning data base. This work builds inversely a base performance model of a turboprop engine to be used for a high altitude operation UAV using measuring performance data, and proposes a fault diagnostic system using the base performance model and artificial intelligent methods such as Fuzzy and Neural Networks. Each real engine performance model, which is named as the base performance model that can simulate a new engine performance, is inversely made using its performance test data. Therefore the condition monitoring of each engine can be more precisely carried out through comparison with measuring performance data. The proposed diagnostic system identifies firstly the faulted components using Fuzzy Logic, and then quantifies faults of the identified components using Neural Networks leaned by fault learning data base obtained from the developed base performance model. In leaning the measuring performance data of the faulted components, the FFBP (Feed Forward Back Propagation) is used. In order to user's friendly purpose, the proposed diagnostic program is coded by the GUI type using MATLAB.
Comparison between objective measures and parental behavioral rating scales of memory and attention in pediatric endocrinology patients.

PubMed

Limbers, Christine; Young, Danielle; Jernigan, Stephanie; Bryant, William; Stephen, Matt

2017-01-01

Behavioral rating scales represent one potential method for screening of cognitive functioning in routine clinical care. It is not yet known if objective performance based measures and behavioral rating scales of cognitive functioning completed by parents yield similar information in pediatric endocrinology patients. The purpose of the present study was to evaluate the associations between performance-based measures and behavioral rating scales of memory and attention/concentration completed by parents of pediatric patients with Type 1 Diabetes or obesity. The sample consisted of 73 pediatric patients with Type 1 Diabetes or obesity (BMI > 95th percentile) ages 6-16 years (mean age = 12.29 years) referred to an outpatient pediatric endocrinology clinic. Youth were administered the Wide Range Assessment of Memory and Learning (WRAML-2). Parents completed the Child Behavior Checklist (CBCL) and the PedsQL Cognitive Functioning Scale. Pearson's Product Moment Correlations were examined among the performance-based measures and behavioral rating scales. All intercorrelations between the performance-based measures and behavioral rating scales completed by parents were in the small range. The only statistically significant (P < 0.05) and approaching medium correlation was between the PedsQL Cognitive Functioning Scale and WRAML-2 Verbal Memory Index (r = 0.28). On behavioral rating scales and performance-based measures of visual memory and attention/concentration, our sample exhibited greater difficulties than healthy youth from previously published data (P < 0.05). One possible explanation for our findings is that behavioral rating scales of attention/concentration and memory completed by parents measure different aspects of cognitive functioning than performance based measures in pediatric patients with Type 1 Diabetes or obesity.

Sustainability of quality improvement following removal of pay-for-performance incentives.

PubMed

Benzer, Justin K; Young, Gary J; Burgess, James F; Baker, Errol; Mohr, David C; Charns, Martin P; Kaboli, Peter J

2014-01-01

Although pay-for-performance (P4P) has become a central strategy for improving quality in US healthcare, questions persist about the effectiveness of these programs. A key question is whether quality improvement that occurs as a result of P4P programs is sustainable, particularly if incentives are removed. To investigate sustainability of performance levels following removal of performance-based incentives. Observational cohort study that capitalized on a P4P program within the Veterans Health Administration (VA) that included adoption and subsequent removal of performance-based incentives for selected inpatient quality measures. The study sample comprised 128 acute care VA hospitals where performance was assessed between 2004 and 2010. VA system managers set annual performance goals in consultation with clinical leaders, and report performance scores to medical centers on a quarterly basis. These scores inform performance-based incentives for facilities and their managers. Bonuses are distributed based on the attainment of these performance goals. Seven quality of care measures for acute coronary syndrome, heart failure, and pneumonia linked to performance-based incentives. Significant improvements in performance were observed for six of seven quality of care measures following adoption of performance-based incentives and were maintained up to the removal of the incentive; subsequently, the observed performance levels were sustained. This is a quasi-experimental study without a comparison group; causal conclusions are limited. The maintenance of performance levels after removal of a performance-based incentive has implications for the implementation of Medicare's value-based purchasing initiative and other P4P programs. Additional research is needed to better understand human and system-level factors that mediate sustainability of performance-based incentives.
Assessing Therapist Competence: Development of a Performance-Based Measure and Its Comparison With a Web-Based Measure.

PubMed

Cooper, Zafra; Doll, Helen; Bailey-Straebler, Suzanne; Bohn, Kristin; de Vries, Dian; Murphy, Rebecca; O'Connor, Marianne E; Fairburn, Christopher G

2017-10-31

Recent research interest in how best to train therapists to deliver psychological treatments has highlighted the need for rigorous, but scalable, means of measuring therapist competence. There are at least two components involved in assessing therapist competence: the assessment of their knowledge of the treatment concerned, including how and when to use its strategies and procedures, and an evaluation of their ability to apply such knowledge skillfully in practice. While the assessment of therapists' knowledge has the potential to be completed efficiently on the Web, the assessment of skill has generally involved a labor-intensive process carried out by clinicians, and as such, may not be suitable for assessing training outcome in certain circumstances. The aims of this study were to develop and evaluate a role-play-based measure of skill suitable for assessing training outcome and to compare its performance with a highly scalable Web-based measure of applied knowledge. Using enhanced cognitive behavioral therapy (CBT-E) for eating disorders as an exemplar, clinical scenarios for role-play assessment were developed and piloted together with a rating scheme for assessing trainee therapists' performance. These scenarios were evaluated by examining the performance of 93 therapists from different professional backgrounds and at different levels of training in implementing CBT-E. These therapists also completed a previously developed Web-based measure of applied knowledge, and the ability of the Web-based measure to efficiently predict competence on the role-play measure was investigated. The role-play measure assessed performance at implementing a range of CBT-E procedures. The majority of the therapists rated their performance as moderately or closely resembling their usual clinical performance. Trained raters were able to achieve good-to-excellent reliability for averaged competence, with intraclass correlation coefficients ranging from .653 to 909. The measure was also sensitive to change, with scores being significantly higher after training than before as might be expected (mean difference 0.758, P<.001) even when taking account of repeated data (mean difference 0.667, P<.001). The major shortcoming of the role-play measure was that it required considerable time and resources. This shortcoming is inherent in the method. Given this, of most interest for assessing training outcome, scores on the Web-based measure efficiently predicted therapist competence, as judged by the role-play measure (with the Web-based measure having a positive predictive value of 77% and specificity of 78%). The results of this study suggest that while it was feasible and acceptable to assess performance using the newly developed role-play measure, the highly scalable Web-based measure could be used in certain circumstances as a substitute for the more labor-intensive, and hence, more costly role-play method. ©Zafra Cooper, Helen Doll, Suzanne Bailey-Straebler, Kristin Bohn, Dian de Vries, Rebecca Murphy, Marianne E O'Connor, Christopher G Fairburn. Originally published in JMIR Mental Health (http://mental.jmir.org), 31.10.2017.
Worse self-reported outcomes but no limitations in performance-based measures in patients with long-standing hip and groin pain compared with healthy controls.

PubMed

Wörner, Tobias; Sigurðsson, Haraldur B; Pålsson, Anders; Kostogiannis, Ioannis; Ageberg, Eva

2017-01-01

This study aimed to evaluate patient-reported outcomes as well as lower extremity and trunk muscle function in patients with long-standing hip and groin pain, in comparison with matched, healthy controls. It was hypothesized that patients with long-standing hip and groin pain would report more deficiency on the Copenhagen Hip and Groin Outcome Score (HAGOS) and have worse outcomes on performance-based measures than healthy controls. Nineteen patients with long-standing hip and groin pain and 19 healthy, activity level-, age-, gender-, and weight-matched controls were assessed with the HAGOS for self-reported outcomes, and a parallel squat (w/kg), single-leg triple jump (cm), single-leg rise (n), barbell roll-out (% of height), and plank test (s) for performance-based measures. Independent sample t test was performed to assess between-group differences. The paired t test was used to analyse between-limb differences in unilateral performance tasks. The patients had worse scores than the controls in all HAGOS subscales (p ≤ 0.001), while no statistically significant differences were observed for any performance measure between groups or between symptomatic and non-symptomatic limbs. Despite significant self-reported functional limitations on the HAGOS, there were no significant differences between groups in performance-based strength or power measures. The results of this study highlight the need to identify performance-based measures, sensitive to functional deficiencies in patients with long-standing hip and groin pain in order to complement the clinical picture obtained by patient-reported outcomes such as the HAGOS. III.
Performance measurement: integrating quality management and activity-based cost management.

PubMed

McKeon, T

1996-04-01

The development of an activity-based management system provides a framework for developing performance measures integral to quality and cost management. Performance measures that cross operational boundaries and embrace core processes provide a mechanism to evaluate operational results related to strategic intention and internal and external customers. The author discusses this measurement process that allows managers to evaluate where they are and where they want to be, and to set a course of action that closes the gap between the two.
Data driven performance measures for effective management of complex transportation networks.

DOT National Transportation Integrated Search

2014-02-01

This research aims to explore performance measures quantified based on different transportation data sources. It examined the major : performance measures that can help describe both traffic operations and safety conditions. The available data source...
Toward a Culture of Consequences: Performance-Based Accountability Systems for Public Services. Monograph

ERIC Educational Resources Information Center

Stecher, Brian M.; Camm, Frank; Damberg, Cheryl L.; Hamilton, Laura S.; Mullen, Kathleen J.; Nelson, Christopher; Sorensen, Paul; Wachs, Martin; Yoh, Allison; Zellman, Gail L.

2010-01-01

Performance-based accountability systems (PBASs), which link incentives to measured performance as a means of improving services to the public, have gained popularity. While PBASs can vary widely across sectors, they share three main components: goals, incentives, and measures. Research suggests that PBASs influence provider behaviors, but little…
Analytically Quantifying Gains in the Test and Evaluation Process through Capabilities-Based Analysis

DTIC Science & Technology

2011-09-01

Evaluation Process through Capabilities-Based Analysis 5. FUNDING NUMBERS 6. AUTHOR(S) Eric J. Lednicky 7. PERFORMING ORGANIZATION NAME(S) AND...ADDRESS(ES) Naval Postgraduate School Monterey, CA 93943-5000 8. PERFORMING ORGANIZATION REPORT NUMBER 9. SPONSORING /MONITORING AGENCY NAME(S...14 C. MEASURES OF EFFECTIVENESS / MEASURES OF PERFORMANCE
Classification accuracy of claims-based methods for identifying providers failing to meet performance targets.

PubMed

Hubbard, Rebecca A; Benjamin-Johnson, Rhondee; Onega, Tracy; Smith-Bindman, Rebecca; Zhu, Weiwei; Fenton, Joshua J

2015-01-15

Quality assessment is critical for healthcare reform, but data sources are lacking for measurement of many important healthcare outcomes. With over 49 million people covered by Medicare as of 2010, Medicare claims data offer a potentially valuable source that could be used in targeted health care quality improvement efforts. However, little is known about the operating characteristics of provider profiling methods using claims-based outcome measures that may estimate provider performance with error. Motivated by the example of screening mammography performance, we compared approaches to identifying providers failing to meet guideline targets using Medicare claims data. We used data from the Breast Cancer Surveillance Consortium and linked Medicare claims to compare claims-based and clinical estimates of cancer detection rate. We then demonstrated the performance of claim-based estimates across a broad range of operating characteristics using simulation studies. We found that identification of poor performing providers was extremely sensitive to algorithm specificity, with no approach identifying more than 65% of poor performing providers when claims-based measures had specificity of 0.995 or less. We conclude that claims have the potential to contribute important information on healthcare outcomes to quality improvement efforts. However, to achieve this potential, development of highly accurate claims-based outcome measures should remain a priority. Copyright © 2014 John Wiley & Sons, Ltd.
Machine learning classifiers for glaucoma diagnosis based on classification of retinal nerve fibre layer thickness parameters measured by Stratus OCT.

PubMed

Bizios, Dimitrios; Heijl, Anders; Hougaard, Jesper Leth; Bengtsson, Boel

2010-02-01

To compare the performance of two machine learning classifiers (MLCs), artificial neural networks (ANNs) and support vector machines (SVMs), with input based on retinal nerve fibre layer thickness (RNFLT) measurements by optical coherence tomography (OCT), on the diagnosis of glaucoma, and to assess the effects of different input parameters. We analysed Stratus OCT data from 90 healthy persons and 62 glaucoma patients. Performance of MLCs was compared using conventional OCT RNFLT parameters plus novel parameters such as minimum RNFLT values, 10th and 90th percentiles of measured RNFLT, and transformations of A-scan measurements. For each input parameter and MLC, the area under the receiver operating characteristic curve (AROC) was calculated. There were no statistically significant differences between ANNs and SVMs. The best AROCs for both ANN (0.982, 95%CI: 0.966-0.999) and SVM (0.989, 95% CI: 0.979-1.0) were based on input of transformed A-scan measurements. Our SVM trained on this input performed better than ANNs or SVMs trained on any of the single RNFLT parameters (p < or = 0.038). The performance of ANNs and SVMs trained on minimum thickness values and the 10th and 90th percentiles were at least as good as ANNs and SVMs with input based on the conventional RNFLT parameters. No differences between ANN and SVM were observed in this study. Both MLCs performed very well, with similar diagnostic performance. Input parameters have a larger impact on diagnostic performance than the type of machine classifier. Our results suggest that parameters based on transformed A-scan thickness measurements of the RNFL processed by machine classifiers can improve OCT-based glaucoma diagnosis.
Comparing student performance on paper- and computer-based math curriculum-based measures.

PubMed

Hensley, Kiersten; Rankin, Angelica; Hosp, John

2017-01-01

As the number of computerized curriculum-based measurement (CBM) tools increases, it is necessary to examine whether or not student performance can generalize across a variety of test administration modes (i.e., paper or computer). The purpose of this study is to compare math fact fluency on paper versus computer for 197 upper elementary students. Students completed identical sets of probes on paper and on the computer, which were then scored for digits correct, problems correct, and accuracy. Results showed a significant difference in performance between the two sets of probes, with higher fluency rates on the paper probes. Because decisions about levels of student support and interventions often rely on measures such as these, more research in this area is needed to examine the potential differences in student performance between paper-based and computer-based CBMs.
Parent ratings of working memory are uniquely related to performance-based measures of secondary memory but not primary memory.

PubMed

Ralph, Kathryn J; Gibson, Bradley S; Gondoli, Dawn M

2018-03-06

Existing evidence suggests that performance- and rating-based measures of working memory (WM) correlate poorly. Although some researchers have interpreted this evidence as suggesting that these measures may be assessing distinct cognitive constructs, another possibility is that rating-based measures are related to some but not all theoretically motivated performance-based measures. The current study distinguished between performance-based measures of primary memory (PM) and secondary memory (SM), and examined the relation between each of these components of WM and parent-ratings on the WM subscale of the Behavior Rating Inventory of Executive Function (BRIEF-WM). Because SM and BRIEF-WM scores have both been associated with group differences in attention-deficit/hyperactivity disorder (ADHD), it was hypothesized that SM scores would be uniquely related to parent-rated BRIEF-WM scores. Participants were a sample of 77 adolescents with and without an ADHD diagnosis, aged 11 to 15 years, from a midwestern school district. Participant scores on verbal and spatial immediate free recall tasks were used to estimate both PM and SM capacities. Partial correlation analyses were used to evaluate the extent to which estimates of PM and SM were uniquely related parent-rated BRIEF-WM scores. Both verbal and spatial SM scores were significantly related to parent-rated BRIEF-WM scores, when corresponding PM scores were controlled. Higher verbal and spatial SM scores were associated with less frequent parent-report of WM-related failures in their child's everyday life. However, neither verbal nor spatial PM scores significantly related to parent-rated BRIEF-WM scores, when corresponding SM scores were controlled. The current study suggested that previously observed low correlations between performance- and rating-based measures of WM may result from use of performance-based WM measures that do not capture the unique contributions of PM and SM components of WM.
Management-by-Results and Performance Measurement in Universities--Implications for Work Motivation

ERIC Educational Resources Information Center

Kallio, Kirsi-Mari; Kallio, Tomi J.

2014-01-01

The article focuses on the effects of management-by-results from the perspective of the work motivation of university employees. The study is based on extensive survey data among employees at Finnish universities. According to the results, performance measurement is based on quantitative rather than qualitative measures, and the current…
Performance Funding at MSIs: Considerations and Possible Measures for Public Minority-Serving Institutions

ERIC Educational Resources Information Center

Jones, Tiffany

2014-01-01

States are increasingly funding higher education institutions based on their performance or outcomes instead of relying solely on student enrollment to determine funding formulas. Performance Funding (also called Performance-Based and Outcomes-Based Funding) policies provide state support to public colleges and universities based on outcome…
Proposed Performance Measures and Strategies for Implementation of the Fatigue Risk Management Guidelines for Emergency Medical Services

DOT National Transportation Integrated Search

2018-01-11

Background: Performance measures are a key component of implementation, dissemination, and evaluation of evidence-based guidelines (EBGs). We developed performance measures for Emergency Medical Services (EMS) stakeholders to enable the implementatio...
Advanced Engineering Technology for Measuring Performance.

PubMed

Rutherford, Drew N; D'Angelo, Anne-Lise D; Law, Katherine E; Pugh, Carla M

2015-08-01

The demand for competency-based assessments in surgical training is growing. Use of advanced engineering technology for clinical skills assessment allows for objective measures of hands-on performance. Clinical performance can be assessed in several ways via quantification of an assessee's hand movements (motion tracking), direction of visual attention (eye tracking), levels of stress (physiologic marker measurements), and location and pressure of palpation (force measurements). Innovations in video recording technology and qualitative analysis tools allow for a combination of observer- and technology-based assessments. Overall the goal is to create better assessments of surgical performance with robust validity evidence. Copyright © 2015 Elsevier Inc. All rights reserved.
Language disturbance and functioning in first episode psychosis.

PubMed

Roche, Eric; Segurado, Ricardo; Renwick, Laoise; McClenaghan, Aisling; Sexton, Sarah; Frawley, Timothy; Chan, Carol K; Bonar, Maurice; Clarke, Mary

2016-01-30

Language disturbance has a central role in the presentation of psychotic disorders however its relationship with functioning requires further clarification, particularly in first episode psychosis (FEP). Both language disturbance and functioning can be evaluated with clinician-rated and performance-based measures. We aimed to investigate the concurrent association between clinician-rated and performance-based measures of language disturbance and functioning in FEP. We assessed 108 individuals presenting to an Early Intervention in Psychosis Service in Ireland. Formal thought disorder (FTD) dimensions and bizarre idiosyncratic thinking (BIT) were rated with structured assessment tools. Functioning was evaluated with a performance-based instrument, a clinician-rated measure and indicators of real-world functioning. The disorganisation dimension of FTD was significantly associated with clinician-rated measures of occupational and social functioning (Beta=-0.19, P<0.05 and Beta=-0.31, P<0.01, respectively). BIT was significantly associated with the performance-based measure of functioning (Beta=-0.22, P<0.05). Language disturbance was of less value in predicting real-world measures of functioning. Clinician-rated and performance-based assessments of language disturbance are complementary and each has differential associations with functioning. Communication disorders should be considered as a potential target for intervention in FEP, although further evaluation of the longitudinal relationship between language disturbance and functioning should be undertaken. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.
Analysis of the Department of Defense Pre-Award Contracting Process

DTIC Science & Technology

2014-12-01

Justification and Approval JBSA Joint Base San Antonio KPIs Key Performance Indicators MAJCOMs Major Command MP Mandatory Commands NAVIAR...meets desired results. Results-based performance measurement establishes key performance indicators ( KPIs ) that determine whether procurement...or goals, and underlying business processes (Cullen, 2009, p. 38). Within each quadrant, Cullen provided examples of KPIs that serve to measure
What Are Error Rates for Classifying Teacher and School Performance Using Value-Added Models?

ERIC Educational Resources Information Center

Schochet, Peter Z.; Chiang, Hanley S.

2013-01-01

This article addresses likely error rates for measuring teacher and school performance in the upper elementary grades using value-added models applied to student test score gain data. Using a realistic performance measurement system scheme based on hypothesis testing, the authors develop error rate formulas based on ordinary least squares and…
Method and apparatus of a portable imaging-based measurement with self calibration

DOEpatents

Chang, Tzyy-Shuh [Ann Arbor, MI; Huang, Hsun-Hau [Ann Arbor, MI

2012-07-31

A portable imaging-based measurement device is developed to perform 2D projection based measurements on an object that is difficult or dangerous to access. This device is equipped with self calibration capability and built-in operating procedures to ensure proper imaging based measurement.
Practitioner Review: Do Performance-Based Measures and Ratings of Executive Function Assess the Same Construct?

ERIC Educational Resources Information Center

Toplak, Maggie E.; West, Richard F.; Stanovich, Keith E.

2013-01-01

Background: Both performance-based and rating measures are commonly used to index executive function in clinical and neuropsychological assessments. They are intended to index the same broad underlying mental construct of executive function. The association between these two types of measures was investigated in the current article. Method and…

Practice-based learning can improve osteoporosis care.

PubMed

Hess, Brian J; Johnston, Mary M; Iobst, William F; Lipner, Rebecca S

2013-10-01

To examine physician engagement in practice-based learning using a self-evaluation module to assess and improve their care of individuals with or at risk of osteoporosis. Retrospective cohort study. Internal medicine and subspecialty clinics. Eight hundred fifty U.S. physicians with time-limited certification in general internal medicine or a subspecialty. Performance rates on 23 process measures and seven practice system domain scores were obtained from the American Board of Internal Medicine (ABIM) Osteoporosis Practice Improvement Module (PIM), an Internet-based self-assessment module that physicians use to improve performance on one targeted measure. Physicians remeasured performance on their targeted measures by conducting another medical chart review. Variability in performance on measures was found, with observed differences between general internists, geriatricians, and rheumatologists. Some practice system elements were modestly associated with measure performance; the largest association was between providing patient-centered self-care support and documentation of calcium intake and vitamin D estimation and counseling (correlation coefficients from 0.20 to 0.28, Ps < .002). For all practice types, the most commonly selected measure targeted for improvement was documentation of vitamin D level (38% of physicians). On average, physicians reported significant and large increases in performance on measures targeted for improvement. Gaps exist in the quality of osteoporosis care, and physicians can apply practice-based learning using the ABIM PIM to take action to improve the quality of care. © 2013, Copyright the Authors Journal compilation © 2013, The American Geriatrics Society.
45 CFR 305.31 - Amount of incentive payment.

Code of Federal Regulations, 2010 CFR

2010-10-01

... PROGRAM PERFORMANCE MEASURES, STANDARDS, FINANCIAL INCENTIVES, AND PENALTIES § 305.31 Amount of incentive... establishment, support order, and current collections performance measures and 75 percent of the State's collections base for the fiscal year for the arrearage collections and cost-effectiveness performance measures...
A measurement-based performability model for a multiprocessor system

NASA Technical Reports Server (NTRS)

Ilsueh, M. C.; Iyer, Ravi K.; Trivedi, K. S.

1987-01-01

A measurement-based performability model based on real error-data collected on a multiprocessor system is described. Model development from the raw errror-data to the estimation of cumulative reward is described. Both normal and failure behavior of the system are characterized. The measured data show that the holding times in key operational and failure states are not simple exponential and that semi-Markov process is necessary to model the system behavior. A reward function, based on the service rate and the error rate in each state, is then defined in order to estimate the performability of the system and to depict the cost of different failure types and recovery procedures.
Predictors of Processing-Based Task Performance in Bilingual and Monolingual Children

PubMed Central

Buac, Milijana; Gross, Megan; Kaushanskaya, Margarita

2016-01-01

In the present study we examined performance of bilingual Spanish-English-speaking and monolingual English-speaking school-age children on a range of processing-based measures within the framework of Baddeley’s working memory model. The processing-based measures included measures of short-term memory, measures of working memory, and a novel word-learning task. Results revealed that monolinguals outperformed bilinguals on the short-term memory tasks but not the working memory and novel word-learning tasks. Further, children’s vocabulary skills and socioeconomic status (SES) were more predictive of processing-based task performance in the bilingual group than the monolingual group. Together, these findings indicate that processing-based tasks that engage verbal working memory rather than short-term memory may be better-suited for diagnostic purposes with bilingual children. However, even verbal working memory measures are sensitive to bilingual children’s language-specific knowledge and demographic characteristics, and therefore may have limited clinical utility. PMID:27179914
Prognostic score–based balance measures for propensity score methods in comparative effectiveness research

PubMed Central

Stuart, Elizabeth A.; Lee, Brian K.; Leacy, Finbarr P.

2013-01-01

Objective Examining covariate balance is the prescribed method for determining when propensity score methods are successful at reducing bias. This study assessed the performance of various balance measures, including a proposed balance measure based on the prognostic score (also known as the disease-risk score), to determine which balance measures best correlate with bias in the treatment effect estimate. Study Design and Setting The correlations of multiple common balance measures with bias in the treatment effect estimate produced by weighting by the odds, subclassification on the propensity score, and full matching on the propensity score were calculated. Simulated data were used, based on realistic data settings. Settings included both continuous and binary covariates and continuous covariates only. Results The standardized mean difference in prognostic scores, the mean standardized mean difference, and the mean t-statistic all had high correlations with bias in the effect estimate. Overall, prognostic scores displayed the highest correlations of all the balance measures considered. Prognostic score measure performance was generally not affected by model misspecification and performed well under a variety of scenarios. Conclusion Researchers should consider using prognostic score–based balance measures for assessing the performance of propensity score methods for reducing bias in non-experimental studies. PMID:23849158
Improving integrity of on-line grammage measurement with traceable basic calibration.

PubMed

Kangasrääsiö, Juha

2010-07-01

The automatic control of grammage (basis weight) in paper and board production is based upon on-line grammage measurement. Furthermore, the automatic control of other quality variables such as moisture, ash content and coat weight, may rely on the grammage measurement. The integrity of Kr-85 based on-line grammage measurement systems was studied, by performing basic calibrations with traceably calibrated plastic reference standards. The calibrations were performed according to the EN ISO/IEC 17025 standard, which is a requirement for calibration laboratories. The observed relative measurement errors were 3.3% in the first time calibrations at the 95% confidence level. With the traceable basic calibration method, however, these errors can be reduced to under 0.5%, thus improving the integrity of on-line grammage measurements. Also a standardised algorithm, based on the experience from the performed calibrations, is proposed to ease the adjustment of the different grammage measurement systems. The calibration technique can basically be applied to all beta-radiation based grammage measurements. 2010 ISA. Published by Elsevier Ltd. All rights reserved.
Research Frontiers in Public Sector Performance Measurement

NASA Astrophysics Data System (ADS)

Zhonghua, Cai; Ye, Wang

In "New Public Management" era, performance measurement has been widely used in managerial practices of public sectors. From the content and features of performance measurement, this paper aims to explore inspirations on Chinese public sector performance measurement, which based on a review of prior literatures including influencial factors, methods and indicators of public sector performance evaluation. In the end, arguments are presented in this paper pointed out the direction of future researches in this field.
Are self-injurers impulsive?:Results from two behavioral laboratory studies

PubMed Central

Janis, Irene Belle; Nock, Matthew K.

2009-01-01

Common clinical wisdom suggests that people who engage in self-injury are impulsive. However, virtually all prior work in this area has relied on individuals’ self-report of impulsiveness, despite evidence that people are limited in their ability to accurately report on cognitive processes that occur outside awareness. To address this knowledge gap, we used performance-based measures of several dimensions of impulsiveness to assess whether people engaging in non-suicidal self-injury (NSSI) demonstrate greater impulsiveness than non-injurers. In Study 1, we compared adolescent self-injurers (n=64) to age, sex, and race/ethnicity matched, non-injurious controls (n=30) on self-report impulsiveness (Schedule for Affective Disorders and Schizophrenia for School Age Children, Present and Lifetime Version, Kaufman et al., 1997), and on performance-based measures of two dimensions of impulsiveness: behavioral disinhibition (Conners’ Continuous Performance Test, Connors, 1995) and risky decision-making (Iowa Gambling Task, Bechara et al., 1994). In Study 2, we compared adult female self-injurers (n=20) to age and race/ethnicity matched, non-injurious controls (n=20) on self-report impulsiveness (Barratt Impulsiveness Scale-11, Patton et al., 1995), and performance-based measures of behavioral disinhibition, risky decision-making, and two measures of delay discounting (Kirby et al., 1999; Richards et al., 1999). In both studies, self-injurers reported greater impulsiveness; however, performance-based measures of impulsiveness failed to detect any between-group differences. We propose several potential explanations for the discrepancies observed between self-report and performance-based measures of impulsiveness and discuss directions for future research on impulsiveness and self-injury. PMID:19758706
Black Carbon Measurement Intercomparison during the 2017 Black Carbon Shootout

NASA Astrophysics Data System (ADS)

Shingler, T.; Moore, R.; Winstead, E.; Robinson, C. E.; Shook, M.; Crosbie, E.; Ziemba, L. D.; Thornhill, K. L., II; Sorooshian, A.; Anderson, B. E.

2017-12-01

The NASA Langley Aerosol Research Group (LARGE) provides multiple black carbon (BC) based aerosol particle measurements and engine emission factors for airborne and ground-based field campaigns and laboratory studies. These datasets are made available to the general public where accuracy is key to enable further use in environmental assessments, models, and validation studies. Studies are needed to establish the accuracy and precision of BC measurements of particles with varying physical properties using a variety of detection techniques. Work is also needed to develop calibration and correction schemes for new sensors and to link these measurements to heritage instruments on which our understanding of BC emissions and characteristics has been established. A BC measurement intercomparison was performed at Langley Research Center using particles generated from a mini-CAST (Jing) diffusion flame soot generator. The particles were passed to instruments measuring optical absorption, extinction, scattering and black carbon mass. Filter based measurements of optical absorption were performed using a PSAP (Radiance Research) and a TAP (BMI). Absorption was also measured using two photoacoustic based instruments: the MSS-plus (AVL) and PASS-3 (DMT). Measurements of aerosol extinction were performed using three CAPS PM-ex (Aerodyne Research) instruments at multiple wavelengths. Two Artium LII-300 units (standard and high-sensitivity) were used to measure black carbon mass via laser incandescence. Black carbon measurements were correlated to mass collected concurrently on a filter and analyzed by OC/EC analysis (Sunset Labs). Black carbon quantification measurements are analyzed between instruments to assess agreement between platforms using manufacturer's calibration settings as well as after calibrations performed to a single standard soot source (mini-CAST). Sampling was also performed from behind a Falcon aircraft at multiple thrust settings and downwind of runway at an international airport with commercial takeoffs and landings.
Guiding Principles and Checklist for Population-Based Quality Metrics

PubMed Central

Brunelli, Steven M.; Maddux, Franklin W.; Parker, Thomas F.; Johnson, Douglas; Nissenson, Allen R.; Collins, Allan; Lacson, Eduardo

2014-01-01

The Centers for Medicare and Medicaid Services oversees the ESRD Quality Incentive Program to ensure that the highest quality of health care is provided by outpatient dialysis facilities that treat patients with ESRD. To that end, Centers for Medicare and Medicaid Services uses clinical performance measures to evaluate quality of care under a pay-for-performance or value-based purchasing model. Now more than ever, the ESRD therapeutic area serves as the vanguard of health care delivery. By translating medical evidence into clinical performance measures, the ESRD Prospective Payment System became the first disease-specific sector using the pay-for-performance model. A major challenge for the creation and implementation of clinical performance measures is the adjustments that are necessary to transition from taking care of individual patients to managing the care of patient populations. The National Quality Forum and others have developed effective and appropriate population-based clinical performance measures quality metrics that can be aggregated at the physician, hospital, dialysis facility, nursing home, or surgery center level. Clinical performance measures considered for endorsement by the National Quality Forum are evaluated using five key criteria: evidence, performance gap, and priority (impact); reliability; validity; feasibility; and usability and use. We have developed a checklist of special considerations for clinical performance measure development according to these National Quality Forum criteria. Although the checklist is focused on ESRD, it could also have broad application to chronic disease states, where health care delivery organizations seek to enhance quality, safety, and efficiency of their services. Clinical performance measures are likely to become the norm for tracking performance for health care insurers. Thus, it is critical that the methodologies used to develop such metrics serve the payer and the provider and most importantly, reflect what represents the best care to improve patient outcomes. PMID:24558050
A proteomics performance standard to support measurement quality in proteomics.

PubMed

Beasley-Green, Ashley; Bunk, David; Rudnick, Paul; Kilpatrick, Lisa; Phinney, Karen

2012-04-01

The emergence of MS-based proteomic platforms as a prominent technology utilized in biochemical and biomedical research has increased the need for high-quality MS measurements. To address this need, National Institute of Standards and Technology (NIST) reference material (RM) 8323 yeast protein extract is introduced as a proteomics quality control material for benchmarking the preanalytical and analytical performance of proteomics-based experimental workflows. RM 8323 yeast protein extract is based upon the well-characterized eukaryote Saccharomyces cerevisiae and can be utilized in the design and optimization of proteomics-based methodologies from sample preparation to data analysis. To demonstrate its utility as a proteomics quality control material, we coupled LC-MS/MS measurements of RM 8323 with the NIST MS Quality Control (MSQC) performance metrics to quantitatively assess the LC-MS/MS instrumentation parameters that influence measurement accuracy, repeatability, and reproducibility. Due to the complexity of the yeast proteome, we also demonstrate how NIST RM 8323, along with the NIST MSQC performance metrics, can be used in the evaluation and optimization of proteomics-based sample preparation methods. © 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.
Software-defined Radio Based Measurement Platform for Wireless Networks

PubMed Central

Chao, I-Chun; Lee, Kang B.; Candell, Richard; Proctor, Frederick; Shen, Chien-Chung; Lin, Shinn-Yan

2015-01-01

End-to-end latency is critical to many distributed applications and services that are based on computer networks. There has been a dramatic push to adopt wireless networking technologies and protocols (such as WiFi, ZigBee, WirelessHART, Bluetooth, ISA100.11a, etc.) into time-critical applications. Examples of such applications include industrial automation, telecommunications, power utility, and financial services. While performance measurement of wired networks has been extensively studied, measuring and quantifying the performance of wireless networks face new challenges and demand different approaches and techniques. In this paper, we describe the design of a measurement platform based on the technologies of software-defined radio (SDR) and IEEE 1588 Precision Time Protocol (PTP) for evaluating the performance of wireless networks. PMID:27891210
Software-defined Radio Based Measurement Platform for Wireless Networks.

PubMed

Chao, I-Chun; Lee, Kang B; Candell, Richard; Proctor, Frederick; Shen, Chien-Chung; Lin, Shinn-Yan

2015-10-01

End-to-end latency is critical to many distributed applications and services that are based on computer networks. There has been a dramatic push to adopt wireless networking technologies and protocols (such as WiFi, ZigBee, WirelessHART, Bluetooth, ISA100.11a, etc. ) into time-critical applications. Examples of such applications include industrial automation, telecommunications, power utility, and financial services. While performance measurement of wired networks has been extensively studied, measuring and quantifying the performance of wireless networks face new challenges and demand different approaches and techniques. In this paper, we describe the design of a measurement platform based on the technologies of software-defined radio (SDR) and IEEE 1588 Precision Time Protocol (PTP) for evaluating the performance of wireless networks.
Measurement properties of performance-based outcome measures to assess physical function in young and middle-aged people known to be at high risk of hip and/or knee osteoarthritis: a systematic review.

PubMed

Kroman, S L; Roos, E M; Bennell, K L; Hinman, R S; Dobson, F

2014-01-01

To systematically appraise the evidence on measurement properties of performance-based outcome measures to assess physical function in young and middle-aged people known to be at high risk of hip and/or knee osteoarthritis (OA). Electronic searches were performed in MEDLINE, CINAHL, Scopus and SPORTDiscus in May 2013. Two reviewers independently rated the measurement properties using the 4-point COSMIN checklist. Best evidence synthesis was made using COSMIN quality, consistency and direction of findings and sample size. Twenty of 2736 papers were eligible for inclusion and 24 different performance-based outcome measures knee or obese populations were evaluated. No tests related to hip populations were included. Twenty-five measurement properties including reliability (nine studies), construct validity (hypothesis testing) (nine studies), measurement error (three studies), structural validity (two studies), interpretability (one study) and responsiveness (one study) were evaluated. A positive rating was given to 12.5% (30/240) of all possible measurement ratings. Tests were grouped into two categories based on the population characteristics. The one-legged hop for distance, followed by the 6-m timed hop and cross over hop for distance were the best-rated tests for the knee-injured population. Whereas the 6-min walk test was the only included test for the obese population. This review highlights the many gaps in knowledge about the measurement properties of performance-based outcome measures for young and middle-aged people known to be at high risk of hip and/or knee OA. There is a need for consensus on which outcome measures should be used and/or combined when assessing physical function in this population. Further good quality research is required. Copyright © 2013 Osteoarthritis Research Society International. Published by Elsevier Ltd. All rights reserved.
Psychometric Properties of Virtual Reality Vignette Performance Measures: A Novel Approach for Assessing Adolescents' Social Competency Skills

ERIC Educational Resources Information Center

Paschall, Mallie J.; Fishbein, Diana H.; Hubal, Robert C.; Eldreth, Diana

2005-01-01

This study examined the psychometric properties of performance measures for three novel, interactive virtual reality vignette exercises developed to assess social competency skills of at-risk adolescents. Performance data were collected from 117 African-American male 15-17 year olds. Data for 18 performance measures were obtained, based on…
Performance-Based Empathy Mediates the Influence of Working Memory on Social Competence in Schizophrenia

PubMed Central

Smith, Matthew J.; Horan, William P.; Cobia, Derin J.; Karpouzian, Tatiana M.; Fox, Jaclyn M.; Reilly, James L.; Breiter, Hans C.

2014-01-01

Empathic deficits have been linked to poor functioning in schizophrenia, but this work is mostly limited to self-report data. This study examined whether performance-based empathy measures account for incremental variance in social competence and social attainment above and beyond self-reported empathy, neurocognition, and clinical symptoms. Given the importance of working memory in theoretical models of empathy and in the prediction of functioning in schizophrenia, we also examined whether empathy mediates the relationship between working memory and functioning. Sixty outpatients and 45 healthy controls were compared on performance-based measures of 3 key components of empathic responding, including facial affect perception, emotional empathy (affective responsiveness), and cognitive empathy (emotional perspective-taking). Participants also completed measures of self-reported empathy, neurocognition, clinical symptoms, and social competence and attainment. Patients demonstrated lower accuracy than controls across the 3 performance-based empathy measures. Among patients, these measures showed minimal relations to self-reported empathy but significantly correlated with working memory and other neurocognitive functions as well as symptom levels. Furthermore, cognitive empathy explained significant incremental variance in social competence (∆R 2 = .07, P < .05) and was found to mediate the relation between working memory and social competence. Performance-based measures of empathy were sensitive to functionally relevant disturbances in schizophrenia. Working memory deficits appear to have an important effect on these disruptions in empathy. Empathy is emerging as a promising new area for social cognitive research and for novel recovery-oriented treatment development. PMID:23770935
45 CFR 2522.650 - What happens if I fail to meet the performance measures included in my grant?

Code of Federal Regulations, 2014 CFR

2014-10-01

... 45 Public Welfare 4 2014-10-01 2014-10-01 false What happens if I fail to meet the performance... if I fail to meet the performance measures included in my grant? (a) If you are significantly under-performing based on the performance measures approved in your grant, or fail to collect appropriate data to...
45 CFR 2522.650 - What happens if I fail to meet the performance measures included in my grant?

Code of Federal Regulations, 2011 CFR

2011-10-01

... 45 Public Welfare 4 2011-10-01 2011-10-01 false What happens if I fail to meet the performance... if I fail to meet the performance measures included in my grant? (a) If you are significantly under-performing based on the performance measures approved in your grant, or fail to collect appropriate data to...
45 CFR 2522.650 - What happens if I fail to meet the performance measures included in my grant?

Code of Federal Regulations, 2013 CFR

2013-10-01

... 45 Public Welfare 4 2013-10-01 2013-10-01 false What happens if I fail to meet the performance... if I fail to meet the performance measures included in my grant? (a) If you are significantly under-performing based on the performance measures approved in your grant, or fail to collect appropriate data to...
45 CFR 2522.650 - What happens if I fail to meet the performance measures included in my grant?

Code of Federal Regulations, 2010 CFR

2010-10-01

... 45 Public Welfare 4 2010-10-01 2010-10-01 false What happens if I fail to meet the performance... if I fail to meet the performance measures included in my grant? (a) If you are significantly under-performing based on the performance measures approved in your grant, or fail to collect appropriate data to...

Development of minimum standards for event-based data collection loggers and performance measure definitions for signalized intersections.

DOT National Transportation Integrated Search

2017-01-01

The arterial traffic signal performance measures were not used to their fullest potential in the past. The development of traffic signal controllers with event-based, high-resolution data logging capabilities enabled the advances in derivation and vi...
Demystifying Results-Based Performance Measurement.

ERIC Educational Resources Information Center

Jorjani, Hamid

Many evaluators are convinced that Results-based Performance Measurement (RBPM) is an effective tool to improve service delivery and cost effectiveness in both public and private sectors. Successful RBPM requires self-directed and cross-functional work teams and the supporting infrastructure to make it work. There are many misconceptions and…
Performance-Based Assessment in Schools: A Comment on Hojnoski, Morrison, Brown, and Matthews (2006)

ERIC Educational Resources Information Center

Smith, Steven R.

2007-01-01

This article addresses a 2006 article by Hojnoski, Morrison, Brown, and Matthews on the use of performance-based measurement among school-based practitioners. Their results suggest that many of their survey respondents favor the use of this form of measurement. This line of research is important and addresses an important issue in current clinical…
Differences in performance and learning proficiency on the Wisconsin Card Sorting Test in schizophrenia: do they reflect distinct neurocognitive subtypes with distinct functional profiles?

PubMed

Kurtz, Matthew M; Wexler, Bruce E

2006-01-31

The aim of this study was two-fold: 1) to determine whether a priori subtyping of patients with schizophrenia based on both overall performance on a measure of executive-function, the Wisconsin Card Sorting Test (WCST), and ability to learn the task with expanded instruction, could be confirmed with other, independent measures of executive-function and learning, and, if so, 2) to determine whether these groups have different neurocognitive profiles and show differences in functional capacity. Fifty-four outpatients with schizophrenia were divided by WCST performance into three groups: intact executive-function (n=28), "good learner" (n=13), and "poor learner" (n=13) groups. These groups were then assessed with a comprehensive neurocognitive test battery and a performance-based measure of functional status, the UCSD Performance-based Skills Assessment (UPSA). The WCST-intact subgroup performed significantly better than other groups on a second measure of executive-function and in working memory, and speeded motor sequencing. Impaired WCST patients who benefited from expanded WCST instruction ("good learners") also showed better performance than patients who did not benefit from instruction ("poor-learners") on a second measure of learning, as well as on a measure of auditory divided attention. The intact WCST subgroup had greater functional capacity than either "strong" or "poor" learners. These subtypes may have implications for response to behavioral treatment interventions.
Study of helicopterroll control effectiveness criteria

NASA Technical Reports Server (NTRS)

Heffley, Robert K.; Bourne, Simon M.; Curtiss, Howard C., Jr.; Hindson, William S.; Hess, Ronald A.

1986-01-01

A study of helicopter roll control effectiveness based on closed-loop task performance measurement and modeling is presented. Roll control critieria are based on task margin, the excess of vehicle task performance capability over the pilot's task performance demand. Appropriate helicopter roll axis dynamic models are defined for use with analytic models for task performance. Both near-earth and up-and-away large-amplitude maneuvering phases are considered. The results of in-flight and moving-base simulation measurements are presented to support the roll control effectiveness criteria offered. This Volume contains the theoretical analysis, simulation results and criteria development.
Use of Latent Class Analysis to define groups based on validity, cognition, and emotional functioning.

PubMed

Morin, Ruth T; Axelrod, Bradley N

Latent Class Analysis (LCA) was used to classify a heterogeneous sample of neuropsychology data. In particular, we used measures of performance validity, symptom validity, cognition, and emotional functioning to assess and describe latent groups of functioning in these areas. A data-set of 680 neuropsychological evaluation protocols was analyzed using a LCA. Data were collected from evaluations performed for clinical purposes at an urban medical center. A four-class model emerged as the best fitting model of latent classes. The resulting classes were distinct based on measures of performance validity and symptom validity. Class A performed poorly on both performance and symptom validity measures. Class B had intact performance validity and heightened symptom reporting. The remaining two Classes performed adequately on both performance and symptom validity measures, differing only in cognitive and emotional functioning. In general, performance invalidity was associated with worse cognitive performance, while symptom invalidity was associated with elevated emotional distress. LCA appears useful in identifying groups within a heterogeneous sample with distinct performance patterns. Further, the orthogonal nature of performance and symptom validities is supported.
Prospective Memory Deficits Are Associated With Poorer Everyday Functioning in Parkinson’s Disease

PubMed Central

Pirogovsky, Eva; Woods, Steven Paul; Filoteo, J. Vincent; Gilbert, Paul E.

2013-01-01

Although individuals with Parkinson’s disease (PD) evidence moderate deficits in prospective memory (PM), it is not known whether PM deficits confer an increased risk of poorer everyday functioning. In the current study, 33 individuals with PD and 26 demographically similar normal controls (NC) were administered performance-based and self-report measures of PM and everyday functioning, including medication and financial management. As compared to NC, PD participants demonstrated significantly lower scores on performance-based measures of PM and financial capacity, worse performance at a trend level on performance-based medication management and endorsed significantly greater self-reported declines in PM and instrumental activities of daily living (iADLs). In the PD sample, the laboratory measure of PM significantly correlated with performance-based measures of financial capacity and medication management and a self-report measure of medication management. Self-reported PM failures significantly correlated with perceived declines in iADLs, worse medication management, and poorer health-related quality of life. Although future studies are needed to examine the incremental ecological validity of PM in PD, findings from this study extend prior research by providing preliminary evidence that PM impairment may play a significant role in a range of critical everyday functions in PD. PMID:22846463
High-performance multi-channel fiber-based absolute distance measuring interferometer system

NASA Astrophysics Data System (ADS)

Deck, Leslie L.

2009-08-01

I describe the principle of operation and performance of a fiber-based absolute distance measuring interferometer system with 60 independent simultaneous channels. The system was designed for demanding applications requiring passive, electrically immune sensors with an extremely long MTTF. In addition to providing better than 0.3nm measurement repeatability at 5KHz for all channels, the system demonstrated absolute distance uncertainty of less than 5nm over a 500 micron measurement range.
Case-Mix Adjusting Performance Measures in a Veteran Population: Pharmacy- and Diagnosis-Based Approaches

PubMed Central

Liu, Chuan-Fen; Sales, Anne E; Sharp, Nancy D; Fishman, Paul; Sloan, Kevin L; Todd-Stenberg, Jeff; Nichol, W Paul; Rosen, Amy K; Loveland, Susan

2003-01-01

Objective To compare the rankings for health care utilization performance measures at the facility level in a Veterans Health Administration (VHA) health care delivery network using pharmacy- and diagnosis-based case-mix adjustment measures. Data Sources/Study Setting The study included veterans who used inpatient or outpatient services in Veterans Integrated Service Network (VISN) 20 during fiscal year 1998 (October 1997 to September 1998; N=126,076). Utilization and pharmacy data were extracted from VHA national databases and the VISN 20 data warehouse. Study Design We estimated concurrent regression models using pharmacy or diagnosis information in the base year (FY1998) to predict health service utilization in the same year. Utilization measures included bed days of care for inpatient care and provider visits for outpatient care. Principal Findings Rankings of predicted utilization measures across facilities vary by case-mix adjustment measure. There is greater consistency within the diagnosis-based models than between the diagnosis- and pharmacy-based models. The eight facilities were ranked differently by the diagnosis- and pharmacy-based models. Conclusions Choice of case-mix adjustment measure affects rankings of facilities on performance measures, raising concerns about the validity of profiling practices. Differences in rankings may reflect differences in comparability of data capture across facilities between pharmacy and diagnosis data sources, and unstable estimates due to small numbers of patients in a facility. PMID:14596393
Feasibility study of palm-based fuels for hybrid rocket motor applications

NASA Astrophysics Data System (ADS)

Tarmizi Ahmad, M.; Abidin, Razali; Taha, A. Latif; Anudip, Amzaryi

2018-02-01

This paper describes the combined analysis done in pure palm-based wax that can be used as solid fuel in a hybrid rocket engine. The measurement of pure palm wax calorific value was performed using a bomb calorimeter. An experimental rocket engine and static test stand facility were established. After initial measurement and calibration, repeated procedures were performed. Instrumentation supplies carried out allow fuel regression rate measurements, oxidizer mass flow rates and stearic acid rocket motors measurements. Similar tests are also carried out with stearate acid (from palm oil by-products) dissolved with nitrocellulose and bee solution. Calculated data and experiments show that rates and regression thrust can be achieved even in pure-tested palm-based wax. Additionally, palm-based wax is mixed with beeswax characterized by higher nominal melting temperatures to increase moisturizing points to higher temperatures without affecting regression rate values. Calorie measurements and ballistic experiments were performed on this new fuel formulation. This new formulation promises driving applications in a wide range of temperatures.
Multiple Types of Memory and Everyday Functional Assessment in Older Adults

PubMed Central

Beaver, Jenna

2017-01-01

Abstract Objective Current proxy measures for assessing everyday functioning (e.g., questionnaires, performance-based measures, and direct observation) show discrepancies in their rating of functional status. The present study investigated the relationship between multiple proxy measures of functional status and content memory (i.e., memory for information), temporal order memory, and prospective memory in an older adult sample. Method A total of 197 community-dwelling older adults who did (n = 45) or did not meet (n = 152) criteria for mild cognitive impairment (MCI), completed six different assessments of functional status (two questionnaires, two performance-based tasks, and two direct observation tasks) as well as experimental measures of content memory, prospective memory, and temporal order memory. Results After controlling for demographics and content memory, the temporal order and prospective memory measures explained a significant amount of variance in all proxy functional status measures. When all variables were entered into the regression analyses, content memory and prospective memory were found to be significant predictors of all measures of functional status, whereas temporal order memory was a significant predictor for the questionnaire and direct observation measures, but not performance-based measures. Conclusion The results suggest that direct observation and questionnaire measures may be able to capture components of everyday functioning that require context and temporal sequencing abilities, such as multi-tasking, that are not as well captured in many current laboratory performance-based measures of functional status. Future research should aim to inform the development and use of maximally effective and valid proxy measures of functional ability. PMID:28334170
The ambiguities of performance-based governance reforms in Italy: Reviving the fortunes of evaluation and performance measurement.

PubMed

Marra, Mita

2018-08-01

Over the past two decades, Italy's administrative reforms have institutionalized evaluation to improve program effectiveness, staff productivity, and results-driven accountability against waste and corruption. Across ministries, regional governments, universities, schools and environmental protection agencies, seemingly unexpected consequences have emerged out of the implementation of performance measurement and evaluation regimes within public organizations. Formal compliance to legally binding evaluation procedures, judicially-sanctioned managerial accountability and lack of cross-agency coordination coupled with long-standing cultural separations among evaluators are some of the ambiguities associated with a performance-based governance system within Italian public administration. Building upon the 'new governane theory,' and qualitative fieldwork, I explore the political consequences of evaluation and performance measurement for possible improvements. From a normative perspective, greater integration between program evaluation and performance measurement can support organizational learning and democratic accountability both at the central and local level. Copyright © 2017 Elsevier Ltd. All rights reserved.
76 FR 26489 - Medicare Program; Hospital Inpatient Value-Based Purchasing Program

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-06

...This final rule implements a Hospital Inpatient Value-Based Purchasing program (Hospital VBP program or the program) under section 1886(o) of the Social Security Act (the Act), under which value-based incentive payments will be made in a fiscal year to hospitals that meet performance standards with respect to a performance period for the fiscal year involved. The program will apply to payments for discharges occurring on or after October 1, 2012, in accordance with section 1886(o) (as added by section 3001(a) of the Patient Protection and Affordable Care Act, as amended by the Health Care and Education Reconciliation Act of 2010 (collectively known as the Affordable Care Act)). Scoring in the Hospital VBP program will be based on whether a hospital meets or exceeds the performance standards established with respect to the measures. By adopting this program, we will reward hospitals based on actual quality performance on measures, rather than simply reporting data for those measures.
Looking Under the Streetlight? A Framework for Differentiating Performance Measures by Level of Care in a Value-Based Payment Environment

PubMed Central

Van Such, Monica B.; Nesse, Robert E.; Dilling, James A.; Swensen, Stephen J.; Thompson, Kristine M.; Orlowski, Janis M.; Santrach, Paula J.

2017-01-01

The majority of quality measures used to assess providers and hospitals are based on easily obtained data, focused on a few dimensions of quality, and developed mainly for primary/community care and population health. While this approach supports efforts focused on addressing the triple aim of health care, many current quality report cards and assessments do not reflect the breadth or complexity of many referral center practices. In this article, the authors highlight the differences between population health efforts and referral care and address issues related to value measurement and performance assessment. They discuss why measures may need to differ across the three levels of care (primary/community care, secondary care, complex care) and illustrate the need for further risk adjustment to eliminate referral bias. With continued movement toward value-based purchasing, performance measures and reimbursement schemes need to reflect the increased level of intensity required to provide complex care. The authors propose a framework to operationalize value measurement and payment for specialty care, and they make specific recommendations to improve performance measurement for complex patients. Implementing such a framework to differentiate performance measures by level of care involves coordinated efforts to change both policy and operational platforms. An essential component of this framework is a new model that defines the characteristics of patients who require complex care and standardizes metrics that incorporate those definitions. PMID:28353502
Looking Under the Streetlight? A Framework for Differentiating Performance Measures by Level of Care in a Value-Based Payment Environment.

PubMed

Naessens, James M; Van Such, Monica B; Nesse, Robert E; Dilling, James A; Swensen, Stephen J; Thompson, Kristine M; Orlowski, Janis M; Santrach, Paula J

2017-07-01

The majority of quality measures used to assess providers and hospitals are based on easily obtained data, focused on a few dimensions of quality, and developed mainly for primary/community care and population health. While this approach supports efforts focused on addressing the triple aim of health care, many current quality report cards and assessments do not reflect the breadth or complexity of many referral center practices.In this article, the authors highlight the differences between population health efforts and referral care and address issues related to value measurement and performance assessment. They discuss why measures may need to differ across the three levels of care (primary/community care, secondary care, complex care) and illustrate the need for further risk adjustment to eliminate referral bias.With continued movement toward value-based purchasing, performance measures and reimbursement schemes need to reflect the increased level of intensity required to provide complex care. The authors propose a framework to operationalize value measurement and payment for specialty care, and they make specific recommendations to improve performance measurement for complex patients. Implementing such a framework to differentiate performance measures by level of care involves coordinated efforts to change both policy and operational platforms. An essential component of this framework is a new model that defines the characteristics of patients who require complex care and standardizes metrics that incorporate those definitions.
Pulse Transit Time Measurement Using Seismocardiogram, Photoplethysmogram, and Acoustic Recordings: Evaluation and Comparison.

PubMed

Yang, Chenxi; Tavassolian, Negar

2018-05-01

This work proposes a novel method of pulse transit time (PTT) measurement. The proximal arterial location data are collected from seismocardiogram (SCG) recordings by placing a micro-electromechanical accelerometer on the chest wall. The distal arterial location data are recorded using an acoustic sensor placed inside the ear. The performance of distal location recordings is evaluated by comparing SCG-acoustic and SCG-photoplethysmogram (PPG) measurements. PPG and acoustic performances under motion noise are also compared. Experimental results suggest comparable performances for the acoustic-based and PPG-based devices. The feasibility of each PTT measurement method is validated for blood pressure evaluations and its limitations are analyzed.
Spatial and Numerical Predictors of Measurement Performance: The Moderating Effects of Community Income and Gender

ERIC Educational Resources Information Center

Casey, Beth M.; Dearing, Eric; Vasilyeva, Marina; Ganley, Colleen M.; Tine, Michele

2011-01-01

Spatial reasoning and numerical predictors of measurement performance were investigated in 4th graders from low-income and affluent communities. Predictors of 2 subtypes of measurement performance (spatial-conceptual and formula based) were assessed while controlling for verbal and spatial working memory. Consistent with prior findings, students…
Electrical characterization of fluorinated benzothiadiazole based conjugated copolymer - a promising material for high-performance solar cells

NASA Astrophysics Data System (ADS)

Toušek, J.; Toušková, J.; Remeš, Z.; Chomutová, R.; Čermák, J.; Helgesen, M.; Carlé, J. E.; Krebs, F. C.

2015-12-01

Measurements of electrical conductivity, electron work function, carrier mobility of holes and the diffusion length of excitons were performed on samples of conjugated polymers relevant to polymer solar cells. A state of the art fluorinated benzothiadiazole based conjugated copolymer (PBDTTHD - DTBTff) was studied and benchmarked against the reference polymer poly-3-hexylthiophene (P3HT). We employed, respectively, four electrode conductivity measurements, Kelvin probe work function measurements, carrier mobility using charge extraction by linearly increasing voltage (CELIV) measurements and diffusion length determinaton using surface photovoltage measurements.
Measurement issues in the evaluation of chronic disease self-management programs.

PubMed

Nolte, Sandra; Elsworth, Gerald R; Newman, Stanton; Osborne, Richard H

2013-09-01

To provide an in-depth analysis of outcome measures used in the evaluation of chronic disease self-management programs consistent with the Stanford curricula. Based on a systematic review on self-management programs, effect sizes derived from reported outcome measures are categorized according to the quality of life appraisal model developed by Schwartz and Rapkin which classifies outcomes from performance-based measures (e.g., clinical outcomes) to evaluation-based measures (e.g., emotional well-being). The majority of outcomes assessed in self-management trials are based on evaluation-based methods. Overall, effects on knowledge--the only performance-based measure observed in selected trials--are generally medium to large. In contrast, substantially more inconsistent results are found for both perception- and evaluation-based measures that mostly range between nil and small positive effects. Effectiveness of self-management interventions and resulting recommendations for health policy makers are most frequently derived from highly variable evaluation-based measures, that is, types of outcomes that potentially carry a substantial amount of measurement error and/or bias such as response shift. Therefore, decisions regarding the value and efficacy of chronic disease self-management programs need to be interpreted with care. More research, especially qualitative studies, is needed to unravel cognitive processes and the role of response shift bias in the measurement of change.
Comparison of Self-Report Versus Sensor-Based Methods for Measuring the Amount of Upper Limb Activity Outside the Clinic.

PubMed

Waddell, Kimberly J; Lang, Catherine E

2018-03-10

To compare self-reported with sensor-measured upper limb (UL) performance in daily life for individuals with chronic (≥6mo) UL paresis poststroke. Secondary analysis of participants enrolled in a phase II randomized, parallel, dose-response UL movement trial. This analysis compared the accuracy and consistency between self-reported UL performance and sensor-measured UL performance at baseline and immediately post an 8-week intensive UL task-specific intervention. Outpatient rehabilitation. Community-dwelling individuals with chronic (≥6mo) UL paresis poststroke (N=64). Not applicable. Motor Activity Log amount of use scale and the sensor-derived use ratio from wrist-worn accelerometers. There was a high degree of variability between self-reported UL performance and the sensor-derived use ratio. Using sensor-based values as a reference, 3 distinct categories were identified: accurate reporters (reporting difference ±0.1), overreporters (difference >0.1), and underreporters (difference <-0.1). Five of 64 participants accurately self-reported UL performance at baseline and postintervention. Over half of participants (52%) switched categories from pre-to postintervention (eg, moved from underreporting preintervention to overreporting postintervention). For the consistent reporters, no participant characteristics were found to influence whether someone over- or underreported performance compared with sensor-based assessment. Participants did not consistently or accurately self-report UL performance when compared with the sensor-derived use ratio. Although self-report and sensor-based assessments are moderately associated and appear similar conceptually, these results suggest self-reported UL performance is often not consistent with sensor-measured performance and the measures cannot be used interchangeably. Copyright © 2018 American Congress of Rehabilitation Medicine. Published by Elsevier Inc. All rights reserved.

Measuring Distribution Performance? Benchmarking Warrants Your Attention

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ericson, Sean J; Alvarez, Paul

Identifying, designing, and measuring performance metrics is critical to securing customer value, but can be a difficult task. This article examines the use of benchmarks based on publicly available performance data to set challenging, yet fair, metrics and targets.
The Utility of Curriculum-Based Measurement and Performance Assessment as Alternatives to Traditional Intelligence and Achievement Tests.

ERIC Educational Resources Information Center

Elliott, Stephen N.; Fuchs, Lynn S.

1997-01-01

Curriculum-based measurement and performance assessments can provide valuable data for making special-education eligibility decisions. Reviews applied research on these assessment approaches and discusses the practical context of treatment validation and decisions about instructional services for students with diverse academic needs. (Author/JDM)
Selection of the Maximum Spatial Cluster Size of the Spatial Scan Statistic by Using the Maximum Clustering Set-Proportion Statistic.

PubMed

Ma, Yue; Yin, Fei; Zhang, Tao; Zhou, Xiaohua Andrew; Li, Xiaosong

2016-01-01

Spatial scan statistics are widely used in various fields. The performance of these statistics is influenced by parameters, such as maximum spatial cluster size, and can be improved by parameter selection using performance measures. Current performance measures are based on the presence of clusters and are thus inapplicable to data sets without known clusters. In this work, we propose a novel overall performance measure called maximum clustering set-proportion (MCS-P), which is based on the likelihood of the union of detected clusters and the applied dataset. MCS-P was compared with existing performance measures in a simulation study to select the maximum spatial cluster size. Results of other performance measures, such as sensitivity and misclassification, suggest that the spatial scan statistic achieves accurate results in most scenarios with the maximum spatial cluster sizes selected using MCS-P. Given that previously known clusters are not required in the proposed strategy, selection of the optimal maximum cluster size with MCS-P can improve the performance of the scan statistic in applications without identified clusters.
Selection of the Maximum Spatial Cluster Size of the Spatial Scan Statistic by Using the Maximum Clustering Set-Proportion Statistic

PubMed Central

Ma, Yue; Yin, Fei; Zhang, Tao; Zhou, Xiaohua Andrew; Li, Xiaosong

2016-01-01

Spatial scan statistics are widely used in various fields. The performance of these statistics is influenced by parameters, such as maximum spatial cluster size, and can be improved by parameter selection using performance measures. Current performance measures are based on the presence of clusters and are thus inapplicable to data sets without known clusters. In this work, we propose a novel overall performance measure called maximum clustering set–proportion (MCS-P), which is based on the likelihood of the union of detected clusters and the applied dataset. MCS-P was compared with existing performance measures in a simulation study to select the maximum spatial cluster size. Results of other performance measures, such as sensitivity and misclassification, suggest that the spatial scan statistic achieves accurate results in most scenarios with the maximum spatial cluster sizes selected using MCS-P. Given that previously known clusters are not required in the proposed strategy, selection of the optimal maximum cluster size with MCS-P can improve the performance of the scan statistic in applications without identified clusters. PMID:26820646
Comparison of measurement- and proxy-based Vs30 values in California

USGS Publications Warehouse

Yong, Alan K.

2016-01-01

This study was prompted by the recent availability of a significant amount of openly accessible measured VS30 values and the desire to investigate the trend of using proxy-based models to predict VS30 in the absence of measurements. Comparisons between measured and model-based values were performed. The measured data included 503 VS30 values collected from various projects for 482 seismographic station sites in California. Six proxy-based models—employing geologic mapping, topographic slope, and terrain classification—were also considered. Included was a new terrain class model based on the Yong et al. (2012) approach but recalibrated with updated measured VS30 values. Using the measured VS30 data as the metric for performance, the predictive capabilities of the six models were determined to be statistically indistinguishable. This study also found three models that tend to underpredict VS30 at lower velocities (NEHRP Site Classes D–E) and overpredict at higher velocities (Site Classes B–C).
Performance model for grid-connected photovoltaic inverters.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Boyson, William Earl; Galbraith, Gary M.; King, David L.

2007-09-01

This document provides an empirically based performance model for grid-connected photovoltaic inverters used for system performance (energy) modeling and for continuous monitoring of inverter performance during system operation. The versatility and accuracy of the model were validated for a variety of both residential and commercial size inverters. Default parameters for the model can be obtained from manufacturers specification sheets, and the accuracy of the model can be further refined using measurements from either well-instrumented field measurements in operational systems or using detailed measurements from a recognized testing laboratory. An initial database of inverter performance parameters was developed based on measurementsmore » conducted at Sandia National Laboratories and at laboratories supporting the solar programs of the California Energy Commission.« less
Performance Measures for Student Success, 2016

ERIC Educational Resources Information Center

North Carolina Community College System, 2016

2016-01-01

The Performance Measures for Student Success Report is the North Carolina Community College System's major accountability document. This annual performance report is based on data compiled from the previous year and serves to inform colleges and the public on the performance of our 58 community colleges. In 1993, the State Board of Community…
Performance Measures for Student Success, 2013

ERIC Educational Resources Information Center

North Carolina Community College System, 2013

2013-01-01

The Performance Measures for Student Success Report is the North Carolina Community College System's major accountability document. This annual performance report is based on data compiled from the previous year and serves to inform colleges and the public on the performance of North Carolina's 58 community colleges. In 2010, President Scott Ralls…
Performance Measures for Student Success, 2014

ERIC Educational Resources Information Center

North Carolina Community College System, 2014

2014-01-01

The Performance Measures for Student Success Report is the North Carolina Community College System's major accountability document. This annual performance report is based on data compiled from the previous year and serves to inform colleges and the public on the performance of North Carolina's 58 community colleges. In 2010, President Scott Ralls…
Cognitive, Parent and Teacher Rating Measures of Executive Functioning: Shared and Unique Influences on School Achievement

PubMed Central

Dekker, Marielle C.; Ziermans, Tim B.; Spruijt, Andrea M.; Swaab, Hanna

2017-01-01

Very little is known about the relative influence of cognitive performance-based executive functioning (EF) measures and behavioral EF ratings in explaining differences in children's school achievement. This study examined the shared and unique influence of these different EF measures on math and spelling outcome for a sample of 84 first and second graders. Parents and teachers completed the Behavior Rating Inventory of Executive Function (BRIEF), and children were tested with computer-based performance tests from the Amsterdam Neuropsychological Tasks (ANT). Mixed-model hierarchical regression analyses, including intelligence level and age, showed that cognitive performance and teacher's ratings of working memory and shifting concurrently explained differences in spelling. However, teacher's behavioral EF ratings did not explain any additional variance in math outcome above cognitive EF performance. Parent's behavioral EF ratings did not add any unique information for either outcome measure. This study provides support for the ecological validity of performance- and teacher rating-based EF measures, and shows that both measures could have a complementary role in identifying EF processes underlying spelling achievement problems. The early identification of strengths and weaknesses of a child's working memory and shifting capabilities, might help teachers to broaden their range of remedial intervention options to optimize school achievement. PMID:28194121
Everyday Functioning in Huntington's Disease: A Laboratory-Based Study of Financial Management Capacity.

PubMed

Sheppard, David P; Pirogovsky-Turk, Eva; Woods, Steven Paul; Holden, Heather M; Nicoll, Diane R; Filoteo, J Vincent; Corey-Bloom, Jody; Gilbert, Paul E

2017-01-01

One important limitation of prior studies examining functional decline in Huntington's disease (HD) has been the reliance on self-reported measures of ability. Since report-based methods can be biased by lack of insight, depression, and cognitive impairment, contrasting self-reported ability with measures that assess capacity may lead to a more comprehensive estimation of real-world functioning. The present study examined self-reported ability to perform instrumental activities of daily living (iADLs) and performance-based financial management capacity in 20 patients diagnosed with mild-moderate Huntington's disease (HD) and 20 demographically similar healthy adults. HD patients reported significantly greater declines in their ability to manage finances. On the capacity measure of financial management, HD patients performed significantly below healthy adults. Additionally, in the HD group there were no significant correlations between self-reported ability and capacity measures of financial management. HD patients endorsed declines in global iADL ability and exhibited deficits in functional capacity when performing a financial management task. Capacity measures may aid in assessing the extent to which HD patients accurately estimate real-world iADL performance, and the present findings suggest that such measures of capacity may be related to the cognitive, but not motor or affective, symptoms of HD.
Depression and work performance: an ecological study using web-based screening.

PubMed

Harvey, S B; Glozier, N; Henderson, M; Allaway, S; Litchfield, P; Holland-Elliott, K; Hotopf, M

2011-05-01

Depression is reported to be a major cause of illness-related sub-optimal work performance (presenteeism). However, the majority of studies examining presenteeism have relied on self-report measures of work performance. Furthermore, employers currently face a number of practical challenges in attempting to facilitate early identification of depression. To test whether a web-based screening tool for depression could be used successfully in the workplace and whether it was possible to detect an association between rates of depression and objective measures of impaired workgroup performance. All permanent employees of a telecommunications company with UK-based call centres were encouraged to complete a web-based psychological assessment using the Patient Health Questionnaire depression scale (PHQ-9). In addition to confidential individual level results, the tool was able to provide anonymized summary statistics for each workgroup. Four objective measures of work performance were collected for each workgroup. During the study period, 1161 web-based PHQ-9 questionnaires were completed. There was a negative linear relationship between rates of depressive symptoms and the overall performance of a workgroup (P < 0.001). The linear relationship between depression and workgroup performance remained after controlling for gender balance, percent of temporary staff, employees' perceived level of engagement and satisfaction with their line manager (P < 0.01). Workgroups with high levels of depressive symptoms tend to perform poorly. Computer-aided web-based screening for symptoms of depression is feasible in a work setting.
A Personal Inertial Navigation System Based on Multiple Distributed, Nine-Degrees-Of-Freedom, Inertial Measurement Units

DTIC Science & Technology

2016-12-01

based complementary filter developed at the Naval Postgraduate School, is developed. The performance of a consumer-grade nine-degrees-of-freedom IMU...measurement unit, complementary filter , gait phase detection, zero velocity update, MEMS, IMU, AHRS, GPS denied, distributed sensor, virtual sensor...algorithm and quaternion-based complementary filter developed at the Naval Postgraduate School, is developed. The performance of a consumer-grade nine
A Comparison of Computation Span and Reading Span Working Memory Measures' Relations With Problem-Solving Criteria.

PubMed

Perlow, Richard; Jattuso, Mia

2018-06-01

Researchers have operationalized working memory in different ways and although working memory-performance relationships are well documented, there has been relatively less attention devoted to determining whether seemingly similar measures yield comparable relations with performance outcomes. Our objective is to assess whether two working memory measures deploying the same processes but different item content yield different relations with two problem-solving criteria. Participants completed a computation-based working memory measure and a reading-based measure prior to performing a computerized simulation. Results reveal differential relations with one of the two criteria and support the notion that the two working memory measures tap working memory capacity and other cognitive abilities. One implication for theory development is that researchers should consider incorporating other cognitive abilities in their working memory models and that the selection of those abilities should correspond to the criterion of interest. One practical implication is that researchers and practitioners shouldn't automatically assume that different phonological loop-based working memory scales are interchangeable.
A method for surface topography measurement using a new focus function based on dual-tree complex wavelet transform

NASA Astrophysics Data System (ADS)

Li, Shimiao; Guo, Tong; Yuan, Lin; Chen, Jinping

2018-01-01

Surface topography measurement is an important tool widely used in many fields to determine the characteristics and functionality of a part or material. Among existing methods for this purpose, the focus variation method has proved high performance particularly in large slope scenarios. However, its performance depends largely on the effectiveness of focus function. This paper presents a method for surface topography measurement using a new focus measurement function based on dual-tree complex wavelet transform. Experiments are conducted on simulated defocused images to prove its high performance in comparison with other traditional approaches. The results showed that the new algorithm has better unimodality and sharpness. The method was also verified by measuring a MEMS micro resonator structure.
A practical material decomposition method for x-ray dual spectral computed tomography.

PubMed

Hu, Jingjing; Zhao, Xing

2016-03-17

X-ray dual spectral CT (DSCT) scans the measured object with two different x-ray spectra, and the acquired rawdata can be used to perform the material decomposition of the object. Direct calibration methods allow a faster material decomposition for DSCT and can be separated in two groups: image-based and rawdata-based. The image-based method is an approximative method, and beam hardening artifacts remain in the resulting material-selective images. The rawdata-based method generally obtains better image quality than the image-based method, but this method requires geometrically consistent rawdata. However, today's clinical dual energy CT scanners usually measure different rays for different energy spectra and acquire geometrically inconsistent rawdata sets, and thus cannot meet the requirement. This paper proposes a practical material decomposition method to perform rawdata-based material decomposition in the case of inconsistent measurement. This method first yields the desired consistent rawdata sets from the measured inconsistent rawdata sets, and then employs rawdata-based technique to perform material decomposition and reconstruct material-selective images. The proposed method was evaluated by use of simulated FORBILD thorax phantom rawdata and dental CT rawdata, and simulation results indicate that this method can produce highly quantitative DSCT images in the case of inconsistent DSCT measurements.
Transportation performance measures for outcome based system management and monitoring.

DOT National Transportation Integrated Search

2014-09-01

The Oregon Department of Transportation (ODOT) is mature in its development and use of : performance measures, however there was not a standard approach for selecting measures nor : evaluating if existing ones were used to inform decision-making. Thi...
Performance-Based Funding of Higher Education: A Detailed Look at Best Practices in 6 States

ERIC Educational Resources Information Center

Miao, Kysie

2012-01-01

Performance-based funding is a system based on allocating a portion of a state's higher education budget according to specific performance measures such as course completion, credit attainment, and degree completion, instead of allocating funding based entirely on enrollment. It is a model that provides a fuller picture of how successfully…
Measuring nursing competencies in the operating theatre: instrument development and psychometric analysis using Item Response Theory.

PubMed

Nicholson, Patricia; Griffin, Patrick; Gillis, Shelley; Wu, Margaret; Dunning, Trisha

2013-09-01

Concern about the process of identifying underlying competencies that contribute to effective nursing performance has been debated with a lack of consensus surrounding an approved measurement instrument for assessing clinical performance. Although a number of methodologies are noted in the development of competency-based assessment measures, these studies are not without criticism. The primary aim of the study was to develop and validate a Performance Based Scoring Rubric, which included both analytical and holistic scales. The aim included examining the validity and reliability of the rubric, which was designed to measure clinical competencies in the operating theatre. The fieldwork observations of 32 nurse educators and preceptors assessing the performance of 95 instrument nurses in the operating theatre were used in the calibration of the rubric. The Rasch model, a particular model among Item Response Models, was used in the calibration of each item in the rubric in an attempt at improving the measurement properties of the scale. This is done by establishing the 'fit' of the data to the conditions demanded by the Rasch model. Acceptable reliability estimates, specifically a high Cronbach's alpha reliability coefficient (0.940), as well as empirical support for construct and criterion validity for the rubric were achieved. Calibration of the Performance Based Scoring Rubric using Rasch model revealed that the fit statistics for most items were acceptable. The use of the Rasch model offers a number of features in developing and refining healthcare competency-based assessments, improving confidence in measuring clinical performance. The Rasch model was shown to be useful in developing and validating a competency-based assessment for measuring the competence of the instrument nurse in the operating theatre with implications for use in other areas of nursing practice. Crown Copyright © 2012. Published by Elsevier Ltd. All rights reserved.
Exercise Performance Measurement with Smartphone Embedded Sensor for Well-Being Management

PubMed Central

Liu, Chung-Tse; Chan, Chia-Tai

2016-01-01

Regular physical activity reduces the risk of many diseases and improves physical and mental health. However, physical inactivity is widespread globally. Improving physical activity levels is a global concern in well-being management. Exercise performance measurement systems have the potential to improve physical activity by providing feedback and motivation to users. We propose an exercise performance measurement system for well-being management that is based on the accumulated activity effective index (AAEI) and incorporates a smartphone-embedded sensor. The proposed system generates a numeric index that is based on users’ exercise performance: their level of physical activity and number of days spent exercising. The AAEI presents a clear number that can serve as a useful feedback and goal-setting tool. We implemented the exercise performance measurement system by using a smartphone and conducted experiments to assess the feasibility of the system and investigated the user experience. We recruited 17 participants for validating the feasibility of the measurement system and a total of 35 participants for investigating the user experience. The exercise performance measurement system showed an overall precision of 88% in activity level estimation. Users provided positive feedback about their experience with the exercise performance measurement system. The proposed system is feasible and has a positive effective on well-being management. PMID:27727188

Exercise Performance Measurement with Smartphone Embedded Sensor for Well-Being Management.

PubMed

Liu, Chung-Tse; Chan, Chia-Tai

2016-10-11

Regular physical activity reduces the risk of many diseases and improves physical and mental health. However, physical inactivity is widespread globally. Improving physical activity levels is a global concern in well-being management. Exercise performance measurement systems have the potential to improve physical activity by providing feedback and motivation to users. We propose an exercise performance measurement system for well-being management that is based on the accumulated activity effective index (AAEI) and incorporates a smartphone-embedded sensor. The proposed system generates a numeric index that is based on users' exercise performance: their level of physical activity and number of days spent exercising. The AAEI presents a clear number that can serve as a useful feedback and goal-setting tool. We implemented the exercise performance measurement system by using a smartphone and conducted experiments to assess the feasibility of the system and investigated the user experience. We recruited 17 participants for validating the feasibility of the measurement system and a total of 35 participants for investigating the user experience. The exercise performance measurement system showed an overall precision of 88% in activity level estimation. Users provided positive feedback about their experience with the exercise performance measurement system. The proposed system is feasible and has a positive effective on well-being management.
Performance-Based Versus Patient-Reported Physical Function: What Are the Underlying Predictors?

PubMed Central

Ölveczky, Daniele D.; Kiely, Dan K.; LaRose, Sharon I.; Jette, Alan M.

2011-01-01

Background Functional limitations have been operationally defined for studies of rehabilitation science through measures of physical performance and patient-reported function. Although conceived as representing similar concepts, differences between these 2 modes of measuring physical functioning have not been adequately characterized scientifically. Objective The purpose of this study was to compare the Short Physical Performance Battery (SPPB) with the function component of the Late-Life Function and Disability Instrument (LLFDI) with respect to their association with physiologic factors and other psychosocial and health factors potentially influencing rehabilitative care. Design This study was a cross-sectional analysis of baseline data from a sample of community-dwelling older adults (N=137) with mobility limitations enrolled in a randomized controlled trial of exercise. Methods A performance-based measure of function (the SPPB) and a self-report measure of function (the LLFDI) served as functional outcomes. Physiologic factors included measures of leg strength, leg velocity, and exercise tolerance test (ETT) duration, which served as a surrogate measure of aerobic capacity. Psychosocial and health factors included age, sex, height, body mass index, number of chronic conditions, depression, and falls efficacy. Results Separate multivariable regression models predicting SPPB and LLFDI scores described 33% and 42% of the variance in each outcome (R2), respectively. Leg velocity and ETT duration were positively associated with both performance-based and patient-reported functional measures. Leg strength and age were positively associated with SPPB scores, whereas number of chronic conditions, sex, and falls efficacy were associated with the LLFDI scores. Limitations This study included older adults with mobility limitations and may not generalize to other populations. Conclusions Performance-based and patient-reported measures of physical function appear to assess different aspects of an older person's functioning. The SPPB was associated with age and physiologic factors, whereas patient-reported function measured by the LLFDI was associated with these factors as well as with psychosocial and health factors. PMID:22003163
Performance-based versus patient-reported physical function: what are the underlying predictors?

PubMed

Bean, Jonathan F; Olveczky, Daniele D; Kiely, Dan K; LaRose, Sharon I; Jette, Alan M

2011-12-01

Functional limitations have been operationally defined for studies of rehabilitation science through measures of physical performance and patient-reported function. Although conceived as representing similar concepts, differences between these 2 modes of measuring physical functioning have not been adequately characterized scientifically. The purpose of this study was to compare the Short Physical Performance Battery (SPPB) with the function component of the Late-Life Function and Disability Instrument (LLFDI) with respect to their association with physiologic factors and other psychosocial and health factors potentially influencing rehabilitative care. This study was a cross-sectional analysis of baseline data from a sample of community-dwelling older adults (N=137) with mobility limitations enrolled in a randomized controlled trial of exercise. A performance-based measure of function (the SPPB) and a self-report measure of function (the LLFDI) served as functional outcomes. Physiologic factors included measures of leg strength, leg velocity, and exercise tolerance test (ETT) duration, which served as a surrogate measure of aerobic capacity. Psychosocial and health factors included age, sex, height, body mass index, number of chronic conditions, depression, and falls efficacy. Separate multivariable regression models predicting SPPB and LLFDI scores described 33% and 42% of the variance in each outcome (R(2)), respectively. Leg velocity and ETT duration were positively associated with both performance-based and patient-reported functional measures. Leg strength and age were positively associated with SPPB scores, whereas number of chronic conditions, sex, and falls efficacy were associated with the LLFDI scores. This study included older adults with mobility limitations and may not generalize to other populations. Performance-based and patient-reported measures of physical function appear to assess different aspects of an older person's functioning. The SPPB was associated with age and physiologic factors, whereas patient-reported function measured by the LLFDI was associated with these factors as well as with psychosocial and health factors.
Feasibility study of direct spectra measurements for Thomson scattered signals for KSTAR fusion-grade plasmas

NASA Astrophysics Data System (ADS)

Park, K.-R.; Kim, K.-h.; Kwak, S.; Svensson, J.; Lee, J.; Ghim, Y.-c.

2017-11-01

Feasibility study of direct spectra measurements of Thomson scattered photons for fusion-grade plasmas is performed based on a forward model of the KSTAR Thomson scattering system. Expected spectra in the forward model are calculated based on Selden function including the relativistic polarization correction. Noise in the signal is modeled with photon noise and Gaussian electrical noise. Electron temperature and density are inferred using Bayesian probability theory. Based on bias error, full width at half maximum and entropy of posterior distributions, spectral measurements are found to be feasible. Comparisons between spectrometer-based and polychromator-based Thomson scattering systems are performed with varying quantum efficiency and electrical noise levels.
Guiding principles and checklist for population-based quality metrics.

PubMed

Krishnan, Mahesh; Brunelli, Steven M; Maddux, Franklin W; Parker, Thomas F; Johnson, Douglas; Nissenson, Allen R; Collins, Allan; Lacson, Eduardo

2014-06-06

The Centers for Medicare and Medicaid Services oversees the ESRD Quality Incentive Program to ensure that the highest quality of health care is provided by outpatient dialysis facilities that treat patients with ESRD. To that end, Centers for Medicare and Medicaid Services uses clinical performance measures to evaluate quality of care under a pay-for-performance or value-based purchasing model. Now more than ever, the ESRD therapeutic area serves as the vanguard of health care delivery. By translating medical evidence into clinical performance measures, the ESRD Prospective Payment System became the first disease-specific sector using the pay-for-performance model. A major challenge for the creation and implementation of clinical performance measures is the adjustments that are necessary to transition from taking care of individual patients to managing the care of patient populations. The National Quality Forum and others have developed effective and appropriate population-based clinical performance measures quality metrics that can be aggregated at the physician, hospital, dialysis facility, nursing home, or surgery center level. Clinical performance measures considered for endorsement by the National Quality Forum are evaluated using five key criteria: evidence, performance gap, and priority (impact); reliability; validity; feasibility; and usability and use. We have developed a checklist of special considerations for clinical performance measure development according to these National Quality Forum criteria. Although the checklist is focused on ESRD, it could also have broad application to chronic disease states, where health care delivery organizations seek to enhance quality, safety, and efficiency of their services. Clinical performance measures are likely to become the norm for tracking performance for health care insurers. Thus, it is critical that the methodologies used to develop such metrics serve the payer and the provider and most importantly, reflect what represents the best care to improve patient outcomes. Copyright © 2014 by the American Society of Nephrology.
Multiple Types of Memory and Everyday Functional Assessment in Older Adults.

PubMed

Beaver, Jenna; Schmitter-Edgecombe, Maureen

2017-06-01

Current proxy measures for assessing everyday functioning (e.g., questionnaires, performance-based measures, and direct observation) show discrepancies in their rating of functional status. The present study investigated the relationship between multiple proxy measures of functional status and content memory (i.e., memory for information), temporal order memory, and prospective memory in an older adult sample. A total of 197 community-dwelling older adults who did (n = 45) or did not meet (n = 152) criteria for mild cognitive impairment (MCI), completed six different assessments of functional status (two questionnaires, two performance-based tasks, and two direct observation tasks) as well as experimental measures of content memory, prospective memory, and temporal order memory. After controlling for demographics and content memory, the temporal order and prospective memory measures explained a significant amount of variance in all proxy functional status measures. When all variables were entered into the regression analyses, content memory and prospective memory were found to be significant predictors of all measures of functional status, whereas temporal order memory was a significant predictor for the questionnaire and direct observation measures, but not performance-based measures. The results suggest that direct observation and questionnaire measures may be able to capture components of everyday functioning that require context and temporal sequencing abilities, such as multi-tasking, that are not as well captured in many current laboratory performance-based measures of functional status. Future research should aim to inform the development and use of maximally effective and valid proxy measures of functional ability. © The Author 2017. Published by Oxford University Press. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.
Determining hospital performance based on rank ordering: is it appropriate?

PubMed

Anderson, Judy; Hackman, Mark; Burnich, Jeff; Gurgiolo, Thomas R

2007-01-01

An increasing number of "pay for performance" initiatives for hospitals and physicians ascribe performance by ranking hospitals or physicians on quality of care measures. Payment is subsequently based on where a hospital or physician ranks among peers. This study examines the variability of ranking hospitals on quality of care measures and its impact on comparing hospital performance. Variability in the ranks of 3 quality of care measures was examined: discharge instruction for congestive heart failure, use of beta-blockers at discharge for heart attack, and timing of initial antibiotic therapy within 4 hours of admission to the hospital for pneumonia. The data are available on the Centers for Medicare and Medicaid Services Web site as part of the Hospital Quality Alliance project. We found that considerable uncertainty exists in ranking of hospitals on these measures, which calls into question the use of rank ordering as a determinant of performance.
Susceptibility to Peer Influence: Using a Performance-Based Measure to Identify Adolescent Males at Heightened Risk for Deviant Peer Socialization

ERIC Educational Resources Information Center

Prinstein, Mitchell J.; Brechwald, Whitney A.; Cohen, Geoffrey L.

2011-01-01

A substantial amount of research has suggested that adolescents' attitudes and behaviors are influenced by peers; however, little is known regarding adolescents' individual variability, or susceptibility, to peer influence. In this study, a performance-based index from an experimental paradigm was used to directly measure adolescents'…
Faustmann and the forestry tradition of outcome-based performance measures

Treesearch

Peter J. Ince

1999-01-01

The concept of land expectation value developed by Martin Faustmann may serve as a paradigm for outcome-based performance measures in public forest management if the concept of forest equity value is broadened to include social and environmental benefits and costs, and sustainability. However, anticipation and accurate evaluation of all benefits and costs appears to...
Examining the Perceived Value of Integration of Earned Value Management with Risk Management-Based Performance Measurement Baseline

ERIC Educational Resources Information Center

Shah, Akhtar H.

2014-01-01

Many projects fail despite the use of evidence-based project management practices such as Performance Measurement Baseline (PMB), Earned Value Management (EVM) and Risk Management (RM). Although previous researchers have found that integrated project management techniques could be more valuable than the same techniques used by themselves, these…
Effects of Goal Line Feedback on Level, Slope, and Stability of Performance within Curriculum-Based Measurement.

ERIC Educational Resources Information Center

Fuchs, Lynn S.; And Others

1991-01-01

Nineteen special educators implemented Curriculum-Based Measurement with a total of 36 learning-disabled math pupils in grades 2-8 to examine the effects of goal line feedback. Results indicated comparable levels and slopes of student performance across treatment conditions, although goal line feedback was associated with greater performance…
Formative, Informative, and Summative Assessment: The Relationship among Curriculum-Based Measurement of Reading, Classroom Engagement, and Reading Performance

ERIC Educational Resources Information Center

Marchand, Gwen C.; Furrer, Carrie J.

2014-01-01

This study explored the relationships among formative curriculum-based measures of reading (CBM-R), student engagement as an extra-academic indicator of student motivation, and summative performance on a high-stakes reading assessment. A diverse sample of third-, fourth-, and fifth-grade students and their teachers responded to questionnaires…
Student Listening Gains in the Basic Communication Course: A Comparison of Self-Report and Performance-Based Competence Measures

ERIC Educational Resources Information Center

Johnson, Danette Ifert; Long, Kathleen M.

2007-01-01

Direct listening instruction is a frequent component of basic communication courses. Research has found changes in self-perceived listening competence during a basic communication course and only a minimal relationship between self-perceived and performance-based measures of listening and other communication behaviors. Results of the present study…
Measuring Provider Performance for Physicians Participating in the Merit-Based Incentive Payment System.

PubMed

Squitieri, Lee; Chung, Kevin C

2017-07-01

In 2017, the Centers for Medicare and Medicaid Services began requiring all eligible providers to participate in the Quality Payment Program or face financial reimbursement penalty. The Quality Payment Program outlines two paths for provider participation: the Merit-Based Incentive Payment System and Advanced Alternative Payment Models. For the first performance period beginning in January of 2017, the Centers for Medicare and Medicaid Services estimates that approximately 83 to 90 percent of eligible providers will not qualify for participation in an Advanced Alternative Payment Model and therefore must participate in the Merit-Based Incentive Payment System program. The Merit-Based Incentive Payment System path replaces existing quality-reporting programs and adds several new measures to evaluate providers using four categories of data: (1) quality, (2) cost/resource use, (3) improvement activities, and (4) advancing care information. These categories will be combined to calculate a weighted composite score for each provider or provider group. Composite Merit-Based Incentive Payment System scores based on 2017 performance data will be used to adjust reimbursed payment in 2019. In this article, the authors provide relevant background for understanding value-based provider performance measurement. The authors also discuss Merit-Based Incentive Payment System reporting requirements and scoring methodology to provide plastic surgeons with the necessary information to critically evaluate their own practice capabilities in the context of current performance metrics under the Quality Payment Program.
Self-rated health and mortality: could clinical and performance-based measures of health and functioning explain the association?

PubMed

Lyyra, Tiina-Mari; Heikkinen, Eino; Lyyra, Anna-Liisa; Jylhä, Marja

2006-01-01

It is well established that self-rated health (SRH) predicts mortality even when other indicators of health status are taken into account. It has been suggested that SRH measures a wide array of mortality-related physiological and pathological characteristics not captured by the covariates included in the analyses. Our aim was to test this hypothesis by examining the predictive value of SRH on mortality controlling for different measurements of body structure, performance-based functioning and diagnosed diseases with a population-based, prospective study over an 18-year follow-up. Subjects consisted of 257 male residents of the city of Jyväskylä, central Finland, aged 51-55 and 71-75 years. Among the 71-75-year-olds the association between SRH and mortality was weaker over the longer compared to shorter follow-up period. In the multivariate Cox regression models with an 18-year follow-up time for middle-aged and a10-year follow-up time for older men, SRH predicted mortality even when the anthropometrics, clinical chemistry and performance-based measures of functioning were controlled for, but not when the number of chronic diseases was included. Although our results confirm the hypothesis that the predictive value of SRH can be explained by diagnosed diseases, its predictive power remained, when the clinical and performance-based measures of health and functioning were controlled.
Achieving optimum diffraction based overlay performance

NASA Astrophysics Data System (ADS)

Leray, Philippe; Laidler, David; Cheng, Shaunee; Coogans, Martyn; Fuchs, Andreas; Ponomarenko, Mariya; van der Schaar, Maurits; Vanoppen, Peter

2010-03-01

Diffraction Based Overlay (DBO) metrology has been shown to have significantly reduced Total Measurement Uncertainty (TMU) compared to Image Based Overlay (IBO), primarily due to having no measurable Tool Induced Shift (TIS). However, the advantages of having no measurable TIS can be outweighed by increased susceptibility to WIS (Wafer Induced Shift) caused by target damage, process non-uniformities and variations. The path to optimum DBO performance lies in having well characterized metrology targets, which are insensitive to process non-uniformities and variations, in combination with optimized recipes which take advantage of advanced DBO designs. In this work we examine the impact of different degrees of process non-uniformity and target damage on DBO measurement gratings and study their impact on overlay measurement accuracy and precision. Multiple wavelength and dual polarization scatterometry are used to characterize the DBO design performance over the range of process variation. In conclusion, we describe the robustness of DBO metrology to target damage and show how to exploit the measurement capability of a multiple wavelength, dual polarization scatterometry tool to ensure the required measurement accuracy for current and future technology nodes.
The Association of Clinic-Based Mobility Tasks and Measures of Community Performance and Risk.

PubMed

Callisaya, Michele L; Verghese, Joe

2018-01-10

Gait speed is recognized as an important predictor of adverse outcomes in older people. However, it is unknown whether other more complex mobility tasks are better predictors of such outcomes. To examine a range of clinic-based mobility tests and determine which were most strongly associated with measures of community performance and risk (CP&R). Cross-sectional study. Central Control Mobility and Aging Study, Westchester County, New York. Aged ≥65 years (n = 424). Clinic-based mobility measures included gait speed measured during normal and dual-task conditions, the Floor Maze Immediate and Delay tasks, and stair ascending and descending. CP&R measures were self-reported by the use of standardized questionnaires and classified into measures of performance (distance walked, travel outside one's home [life space], activities of daily living, and participation in cognitive leisure activities) or risk (balance confidence, fear of falling, and past falls). Linear and logistic regression were used to examine associations between the clinic-based mobility measures and CP&R measures adjusting for covariates. The mean age of the sample was 77.8 (SD 6.4) years, and 55.2% (n = 234) were female. In final models, faster normal walking speed was most strongly associated with 5 of the 7 community measures (greater distance walked, greater life space, better activities of daily living function, higher balance confidence, and less fear of falling; all P < .05). More complex tasks (walking while talking and maze immediate) were associated with cognitive leisure activity (P < .05), and ascending stairs was the only measure associated with a history of falls (P < .05). Normal walking speed is a simple and inexpensive clinic-based mobility test that is associated with a wide range of CP&R measures. In addition, poorer performance ascending stairs may assist in identifying those at risk of falls. Poorer performance in more complex mobility tasks (walking while talking and maze immediate) may suggest inability to participate in cognitive leisure activities. III. Copyright © 2018 American Academy of Physical Medicine and Rehabilitation. Published by Elsevier Inc. All rights reserved.
Performance-based contracting in home-care work in The Netherlands: professionalism under pressure?

PubMed

Oomkens, Rosanne; Hoogenboom, Marcel; Knijn, Trudie

2016-07-01

Our aim was to improve the understanding of the relationships between performance-based contracting, management supportiveness and professionalism in home care. Using path analysis, this article explores the relationships between home-care workers' perceptions of management support, implementation of performance-based contracting (i.e. use of strict time registration rules and cost-efficiency measures) and autonomy and intrinsic job satisfaction. We hypothesised that: use of strict time registration rules and cost-efficiency measures relates to lower levels of autonomy and intrinsic job satisfaction (H1); there is an indirect relationship between use of strict time registration rules and use of cost-efficiency measures and intrinsic job satisfaction via autonomy (H2); higher levels of management support relate to the use of looser time registration rules and less use of cost-efficiency measures (H3); and higher levels of management support relate to higher levels of autonomy and intrinsic job satisfaction (H4). We used data from a cross-sectional survey conducted in 2010 of a sample of Dutch home-care workers (N = 156, response rate = 34%). Overall, our study suggests that the consequences of performance-based contracting for professionalism are ambiguous. More specifically, using strict time registration rules is related to lower levels of autonomy, whereas using cost-efficiency measures does not seem to affect autonomy (H1). Performance-based contracting has no consequences for the level of fulfilment home-care workers find in their job, as neither of the two contracting dimensions measured was directly or indirectly related to intrinsic job satisfaction (H1, H2). The role of managers must be taken into account when studying performance-based contracting, because perceived higher management support is related to managers' less frequent use of both strict time registration rules and of cost-efficiency measures (H3). The insight we gained into the importance of supportive managers for both autonomy and job satisfaction (H4) can help home-care organisations improve the attractiveness of home-care work. © 2015 John Wiley & Sons Ltd.
Proposed Performance Measures and Strategies for Implementation of the Fatigue Risk Management Guidelines for Emergency Medical Services.

PubMed

Martin-Gill, Christian; Higgins, J Stephen; Van Dongen, Hans P A; Buysse, Daniel J; Thackery, Ronald W; Kupas, Douglas F; Becker, David S; Dean, Bradley E; Lindbeck, George H; Guyette, Francis X; Penner, Josef H; Violanti, John M; Lang, Eddy S; Patterson, P Daniel

2018-02-15

Performance measures are a key component of implementation, dissemination, and evaluation of evidence-based guidelines (EBGs). We developed performance measures for Emergency Medical Services (EMS) stakeholders to enable the implementation of guidelines for fatigue risk management in the EMS setting. Panelists associated with the Fatigue in EMS Project, which was supported by the National Highway Traffic Safety Administration (NHTSA), used an iterative process to develop a draft set of performance measures linked to 5 recommendations for fatigue risk management in EMS. We used a cross-sectional survey design and the Content Validity Index (CVI) to quantify agreement among panelists on the wording and content of draft measures. An anonymous web-based tool was used to solicit the panelists' perceptions of clarity and relevance of draft measures. Panelists rated the clarity and relevance separately for each draft measure on a 4-point scale. CVI scores ≥0.78 for clarity and relevance were specified a priori to signify agreement and completion of measurement development. Panelists judged 5 performance measures for fatigue risk management as clear and relevant. These measures address use of fatigue and/or sleepiness survey instruments, optimal duration of shifts, access to caffeine as a fatigue countermeasure, use of napping during shift work, and the delivery of education and training on fatigue risk management for EMS personnel. Panelists complemented performance measures with suggestions for implementation by EMS agencies. Performance measures for fatigue risk management in the EMS setting will facilitate the implementation and evaluation of the EBG for Fatigue in EMS.
Implementation of a High-Speed FPGA and DSP Based FFT Processor for Improving Strain Demodulation Performance in a Fiber-Optic-Based Sensing System

NASA Technical Reports Server (NTRS)

Farley, Douglas L.

2005-01-01

NASA's Aviation Safety and Security Program is pursuing research in on-board Structural Health Management (SHM) technologies for purposes of reducing or eliminating aircraft accidents due to system and component failures. Under this program, NASA Langley Research Center (LaRC) is developing a strain-based structural health-monitoring concept that incorporates a fiber optic-based measuring system for acquiring strain values. This fiber optic-based measuring system provides for the distribution of thousands of strain sensors embedded in a network of fiber optic cables. The resolution of strain value at each discrete sensor point requires a computationally demanding data reduction software process that, when hosted on a conventional processor, is not suitable for near real-time measurement. This report describes the development and integration of an alternative computing environment using dedicated computing hardware for performing the data reduction. Performance comparison between the existing and the hardware-based system is presented.

Performance-based empathy mediates the influence of working memory on social competence in schizophrenia.

PubMed

Smith, Matthew J; Horan, William P; Cobia, Derin J; Karpouzian, Tatiana M; Fox, Jaclyn M; Reilly, James L; Breiter, Hans C

2014-07-01

Empathic deficits have been linked to poor functioning in schizophrenia, but this work is mostly limited to self-report data. This study examined whether performance-based empathy measures account for incremental variance in social competence and social attainment above and beyond self-reported empathy, neurocognition, and clinical symptoms. Given the importance of working memory in theoretical models of empathy and in the prediction of functioning in schizophrenia, we also examined whether empathy mediates the relationship between working memory and functioning. Sixty outpatients and 45 healthy controls were compared on performance-based measures of 3 key components of empathic responding, including facial affect perception, emotional empathy (affective responsiveness), and cognitive empathy (emotional perspective-taking). Participants also completed measures of self-reported empathy, neurocognition, clinical symptoms, and social competence and attainment. Patients demonstrated lower accuracy than controls across the 3 performance-based empathy measures. Among patients, these measures showed minimal relations to self-reported empathy but significantly correlated with working memory and other neurocognitive functions as well as symptom levels. Furthermore, cognitive empathy explained significant incremental variance in social competence (∆R (2) = .07, P < .05) and was found to mediate the relation between working memory and social competence. Performance-based measures of empathy were sensitive to functionally relevant disturbances in schizophrenia. Working memory deficits appear to have an important effect on these disruptions in empathy. Empathy is emerging as a promising new area for social cognitive research and for novel recovery-oriented treatment development. © The Author 2013. Published by Oxford University Press on behalf of the Maryland Psychiatric Research Center. All rights reserved. For permissions, please email: journals.permissions@oup.com.
Performance-Based Service Quality Model: An Empirical Study on Japanese Universities

ERIC Educational Resources Information Center

Sultan, Parves; Wong, Ho

2010-01-01

Purpose: This paper aims to develop and empirically test the performance-based higher education service quality model. Design/methodology/approach: The study develops 67-item instrument for measuring performance-based service quality with a particular focus on the higher education sector. Scale reliability is confirmed using the Cronbach's alpha.…
Cognitive performance modeling based on general systems performance theory.

PubMed

Kondraske, George V

2010-01-01

General Systems Performance Theory (GSPT) was initially motivated by problems associated with quantifying different aspects of human performance. It has proved to be invaluable for measurement development and understanding quantitative relationships between human subsystem capacities and performance in complex tasks. It is now desired to bring focus to the application of GSPT to modeling of cognitive system performance. Previous studies involving two complex tasks (i.e., driving and performing laparoscopic surgery) and incorporating measures that are clearly related to cognitive performance (information processing speed and short-term memory capacity) were revisited. A GSPT-derived method of task analysis and performance prediction termed Nonlinear Causal Resource Analysis (NCRA) was employed to determine the demand on basic cognitive performance resources required to support different levels of complex task performance. This approach is presented as a means to determine a cognitive workload profile and the subsequent computation of a single number measure of cognitive workload (CW). Computation of CW may be a viable alternative to measuring it. Various possible "more basic" performance resources that contribute to cognitive system performance are discussed. It is concluded from this preliminary exploration that a GSPT-based approach can contribute to defining cognitive performance models that are useful for both individual subjects and specific groups (e.g., military pilots).
Combinatoric Models of Information Retrieval Ranking Methods and Performance Measures for Weakly-Ordered Document Collections

ERIC Educational Resources Information Center

Church, Lewis

2010-01-01

This dissertation answers three research questions: (1) What are the characteristics of a combinatoric measure, based on the Average Search Length (ASL), that performs the same as a probabilistic version of the ASL?; (2) Does the combinatoric ASL measure produce the same performance result as the one that is obtained by ranking a collection of…
45 CFR 305.33 - Determination of applicable percentages based on performance levels.

Code of Federal Regulations, 2010 CFR

2010-10-01

..., DEPARTMENT OF HEALTH AND HUMAN SERVICES PROGRAM PERFORMANCE MEASURES, STANDARDS, FINANCIAL INCENTIVES, AND PENALTIES § 305.33 Determination of applicable percentages based on performance levels. (a) A State's... performance levels. 305.33 Section 305.33 Public Welfare Regulations Relating to Public Welfare OFFICE OF...
NEMA image quality phantom measurements and attenuation correction in integrated PET/MR hybrid imaging.

PubMed

Ziegler, Susanne; Jakoby, Bjoern W; Braun, Harald; Paulus, Daniel H; Quick, Harald H

2015-12-01

In integrated PET/MR hybrid imaging the evaluation of PET performance characteristics according to the NEMA standard NU 2-2007 is challenging because of incomplete MR-based attenuation correction (AC) for phantom imaging. In this study, a strategy for CT-based AC of the NEMA image quality (IQ) phantom is assessed. The method is systematically evaluated in NEMA IQ phantom measurements on an integrated PET/MR system. NEMA IQ measurements were performed on the integrated 3.0 Tesla PET/MR hybrid system (Biograph mMR, Siemens Healthcare). AC of the NEMA IQ phantom was realized by an MR-based and by a CT-based method. The suggested CT-based AC uses a template μ-map of the NEMA IQ phantom and a phantom holder for exact repositioning of the phantom on the systems patient table. The PET image quality parameters contrast recovery, background variability, and signal-to-noise ratio (SNR) were determined and compared for both phantom AC methods. Reconstruction parameters of an iterative 3D OP-OSEM reconstruction were optimized for highest lesion SNR in NEMA IQ phantom imaging. Using a CT-based NEMA IQ phantom μ-map on the PET/MR system is straightforward and allowed performing accurate NEMA IQ measurements on the hybrid system. MR-based AC was determined to be insufficient for PET quantification in the tested NEMA IQ phantom because only photon attenuation caused by the MR-visible phantom filling but not the phantom housing is considered. Using the suggested CT-based AC, the highest SNR in this phantom experiment for small lesions (<= 13 mm) was obtained with 3 iterations, 21 subsets and 4 mm Gaussian filtering. This study suggests CT-based AC for the NEMA IQ phantom when performing PET NEMA IQ measurements on an integrated PET/MR hybrid system. The superiority of CT-based AC for this phantom is demonstrated by comparison to measurements using MR-based AC. Furthermore, optimized PET image reconstruction parameters are provided for the highest lesion SNR in NEMA IQ phantom measurements.
Exploring the validity of HPQ-based presenteeism measures to estimate productivity losses in the health and education sectors.

PubMed

Scuffham, Paul A; Vecchio, Nerina; Whiteford, Harvey A

2014-01-01

Illness-related presenteeism (suboptimal work performance) may be a significant factor in worker productivity. Until now, there has been no generally accepted best method of measuring presenteeism across different industries and occupations. This study sought to validate the Health and Work Performance Questionnaire (HPQ)-based measure of presenteeism across occupations and industries and assess the most appropriate method for data analysis. . Work performance was measured using the modified version of the HPQ conducted in workforce samples from the education and health workforce in Queensland, Australia (N = 30,870) during 2005 and 2006. Three approaches to data analysis of presenteeism measures were assessed using absolute performance, the ratio of own performance to others' performance, and the difference between others' and own performance. The best measure is judged by its sensitivity to changes in health indicators. . The measure that best correlated to health indicators was absolute presenteeism. For example, in the health sector, correlations between physical health status and absolute presenteeism were 4 to 5 times greater than the ratio or difference approaches, and in the education sector, these correlations were twice as large. Using this approach, the estimated cost of presenteeism in 2006 was $Aus8338 and $Aus8092 per worker per annum for the health and education sectors, respectively. . The HPQ is a valid measure of presenteeism. Transforming responses by perceived performance of peers is unnecessary as absolute presenteeism correlated best with health indicators. Absolute presenteeism was more insightful for ascertaining the cost of presenteeism.
An advanced look at surgical performance under Medicare's hospital-inpatient value-based purchasing program: who is winning and who is losing?

PubMed

Dupree, James M; Neimeyer, Jennifer; McHugh, Megan

2014-01-01

The Centers for Medicare and Medicaid Services (CMS) is beginning to shift from paying providers based on volume to more explicitly rewarding quality of care. The hospital value-based purchasing (VBP) program is the first in a series of mandatory programs to financially reward and penalize US hospitals based on quality measure performance. Our objective was to identify the characteristics of hospitals that perform well (and those that perform poorly) on the surgical measures in CMS' hospital VBP program. Using 2008 to 2010 performance data from CMS' Hospital Compare website and the 2009 American Hospital Association annual survey, we examined surgical measure performance for all acute care general hospitals in the US. Outcomes were determined by a composite surgical performance score indicating the percentage of eligible surgical performance points that a hospital received. There were 3,030 hospitals included in our study. Composite surgical performance scores were 15.6% lower at public hospitals than at for-profit hospitals (p < 0.01). Additionally, there were significant differences in the routes by which hospitals achieved points, with smaller hospitals, for-profit hospitals, Magnet hospitals, and NSQIP hospitals all more likely to obtain points via the achievement route. The results of our study indicate that public hospitals perform worse on the surgical measures in the hospital VBP program. This study raises important questions about the impact that this new, mandatory program will have on public hospitals, which serve an important safety-net role and appear to be disadvantaged in the hospital VBP program. This issue should continue to be investigated as these mandatory quality programs are updated in future years. Copyright © 2014 American College of Surgeons. Published by Elsevier Inc. All rights reserved.
The Performance Blueprint: An Integrated Logic Model Developed To Enhance Performance Measurement Literacy: The Case of Performance-Based Contract Management.

ERIC Educational Resources Information Center

Longo, Paul J.

This study explored the mechanics of using an enhanced, comprehensive multipurpose logic model, the Performance Blueprint, as a means of building evaluation capacity, referred to in this paper as performance measurement literacy, to facilitate the attainment of both service-delivery oriented and community-oriented outcomes. The application of this…
Computer-Based and Paper-Based Measurement of Recognition Performance.

ERIC Educational Resources Information Center

Federico, Pat-Anthony

To determine the relative reliabilities and validities of paper-based and computer-based measurement procedures, 83 male student pilots and radar intercept officers were administered computer and paper-based tests of aircraft recognition. The subject matter consisted of line drawings of front, side, and top silhouettes of aircraft. Reliabilities…
Performance, physiological, and oculometer evaluation of VTOL landing displays

NASA Technical Reports Server (NTRS)

North, R. A.; Stackhouse, S. P.; Graffunder, K.

1979-01-01

A methodological approach to measuring workload was investigated for evaluation of new concepts in VTOL aircraft displays. Physiological, visual response, and conventional flight performance measures were recorded for landing approaches performed in the NASA Visual Motion Simulator (VMS). Three displays (two computer graphic and a conventional flight director), three crosswind amplitudes, and two motion base conditions (fixed vs. moving base) were tested in a factorial design. Multivariate discriminant functions were formed from flight performance and/or visual response variables. The flight performance variable discriminant showed maximum differentation between crosswind conditions. The visual response measure discriminant maximized differences between fixed vs. motion base conditions and experimental displays. Physiological variables were used to attempt to predict the discriminant function values for each subject/condition trial. The weights of the physiological variables in these equations showed agreement with previous studies. High muscle tension, light but irregular breathing patterns, and higher heart rate with low amplitude all produced higher scores on this scale and thus represent higher workload levels.
Quality Measures for Dialysis: Time for a Balanced Scorecard

PubMed Central

2016-01-01

Recent federal legislation establishes a merit-based incentive payment system for physicians, with a scorecard for each professional. The Centers for Medicare and Medicaid Services evaluate quality of care with clinical performance measures and have used these metrics for public reporting and payment to dialysis facilities. Similar metrics may be used for the future merit-based incentive payment system. In nephrology, most clinical performance measures measure processes and intermediate outcomes of care. These metrics were developed from population studies of best practice and do not identify opportunities for individualizing care on the basis of patient characteristics and individual goals of treatment. The In-Center Hemodialysis (ICH) Consumer Assessment of Healthcare Providers and Systems (CAHPS) survey examines patients' perception of care and has entered the arena to evaluate quality of care. A balanced scorecard of quality performance should include three elements: population-based best clinical practice, patient perceptions, and individually crafted patient goals of care. PMID:26316622
The impact of research-based learning on student’s academic performance and motivation

NASA Astrophysics Data System (ADS)

Sumbawati, M. S.; Anistyasari, Y.

2018-01-01

Undergraduate students often have difficulty in finding the updated research topic for their undergraduate thesis. This is due to students have less knowledge about research in a particular field because they are less familiar with scientific articles. This work, therefore, proposed an implementation of research-based learning and measured students’ academic performance and motivation. The study is conducted in four stages which are the plan, do, check, and act. Research-based learning is conducted based on its syntax. Paper and pencil test is then performed to measure students’ academic achievement and a survey is devoted to determining students’ academic motivation. The results show that most students obtain satisfied score and they feel comfortable to join a class with research-based learning.
Application of polydimethylsiloxane-based optical system for measuring optical density of microbial culture.

PubMed

Takahashi, Yurika

2016-12-01

The performance of recently developed polydimethylsiloxane (PDMS)-based optical system was tested for measuring optical density of microbial culture. The data showed that PDMS-based spectrometer is superior to "one drop" spectrometers in the accuracy, and has an advantage over conventional spectrometers in measuring dense culture without dilution.
Validity evidence for the situational judgment test paradigm in emotional intelligence measurement.

PubMed

Libbrecht, Nele; Lievens, Filip

2012-01-01

To date, various measurement approaches have been proposed to assess emotional intelligence (EI). Recently, two new EI tests have been developed based on the situational judgment test (SJT) paradigm: the Situational Test of Emotional Understanding (STEU) and the Situational Test of Emotion Management (STEM). Initial attempts have been made to examine the construct-related validity of these new tests; we extend these findings by placing the tests in a broad nomological network. To this end, 850 undergraduate students completed a personality inventory, a cognitive ability test, a self-report EI test, a performance-based EI measure, the STEU, and the STEM. The SJT-based EI tests were not strongly correlated with personality and fluid cognitive ability. Regarding their relation with existing EI measures, the tests did not capture the same construct as self-report EI measures, but corresponded rather to performance-based EI measures. Overall, these results lend support for the SJT paradigm for measuring EI as an ability.
Performance Measures, Benchmarking and Value.

ERIC Educational Resources Information Center

McGregor, Felicity

This paper discusses performance measurement in university libraries, based on examples from the University of Wollongong (UoW) in Australia. The introduction highlights the integration of information literacy into the curriculum and the outcomes of a 1998 UoW student satisfaction survey. The first section considers performance indicators in…
Long-term & short-term measures of roadway snow and ice control performance : final report.

DOT National Transportation Integrated Search

2016-07-08

The primary performance measures for RSIC programs by state DOTs are 1) operating speed recovery time and 2) time to achieve bare pavement. There is a continued need for objective, outcome-based performance metrics for RSIC operations. The overall go...
The Effect of Self-Reported and Performance-Based Functional Impairment on Future Hospital Costs of Community-Dwelling Older Persons

ERIC Educational Resources Information Center

Reuben, David B.; Seeman, Teresa E.; Keeler, Emmett; Hayes, Risa P.; Bowman, Lee; Sewall, Ase; Hirsch, Susan H.; Wallace, Robert B.; Guralnik, Jack M.

2004-01-01

Purpose: We determined the prognostic value of self-reported and performance-based measurement of function, including functional transitions and combining different measurement approaches, on utilization. Design and Methods: Our cohort study used the 6th, 7th, and 10th waves of three sites of the Established Populations for Epidemiologic Studies…
A New Method for the Evaluation and Prediction of Base Stealing Performance.

PubMed

Bricker, Joshua C; Bailey, Christopher A; Driggers, Austin R; McInnis, Timothy C; Alami, Arya

2016-11-01

Bricker, JC, Bailey, CA, Driggers, AR, McInnis, TC, and Alami, A. A new method for the evaluation and prediction of base stealing performance. J Strength Cond Res 30(11): 3044-3050, 2016-The purposes of this study were to evaluate a new method using electronic timing gates to monitor base stealing performance in terms of reliability, differences between it and traditional stopwatch-collected times, and its ability to predict base stealing performance. Twenty-five healthy collegiate baseball players performed maximal effort base stealing trials with a right and left-handed pitcher. An infrared electronic timing system was used to calculate the reaction time (RT) and total time (TT), whereas coaches' times (CT) were recorded with digital stopwatches. Reliability of the TGM was evaluated with intraclass correlation coefficients (ICCs) and coefficient of variation (CV). Differences between the TGM and traditional CT were calculated with paired samples t tests Cohen's d effect size estimates. Base stealing performance predictability of the TGM was evaluated with Pearson's bivariate correlations. Acceptable relative reliability was observed (ICCs 0.74-0.84). Absolute reliability measures were acceptable for TT (CVs = 4.4-4.8%), but measures were elevated for RT (CVs = 32.3-35.5%). Statistical and practical differences were found between TT and CT (right p = 0.00, d = 1.28 and left p = 0.00, d = 1.49). The TGM TT seems to be a decent predictor of base stealing performance (r = -0.49 to -0.61). The authors recommend using the TGM used in this investigation for athlete monitoring because it was found to be reliable, seems to be more precise than traditional CT measured with a stopwatch, provides an additional variable of value (RT), and may predict future performance.
T59. VIRTUAL REALTY ASSESSMENT OF FUNCTIONAL CAPACITY IN EARLY SCHIZOPHRENIA: ASSOCIATIONS WITH NEUROCOGNITION, FUNCTIONAL CAPACITY PERFORMANCE, AND DAILY FUNCTIONING

PubMed Central

Ventura, Joseph; Welikson, Tamara; Subotnik, Kenneth L; Ered, Arielle; Keefe, Richard; Hellemann, Gerhard H; Nuechterlein, Keith H

2018-01-01

Abstract Background Research using virtual reality assessment of functional capacity has shown promise as a reliable and valid way to assess treatment response in patients with established schizophrenia. There has been little work on virtual reality based assessments of functional capacity for patients in the early phase of schizophrenia. We examined whether virtual reality based assessment methods reveal functional capacity deficits in young patients and relevant relationships with established measures of neurocognition, functional capacity performance, and daily functioning. Methods The sample consisted of UCLA Aftercare Research Program patients (n=42) who were diagnosed by trained raters administering the SCID and who met criteria for schizophrenia, schizoaffective disorder, or schizophreniform disorder, and screened normal control subjects (n=13). Patients were within 2 years of their first psychotic episode upon clinic entry, were an average of 23.2 years old, and had an average of 12.9 years of education. The Virtual Reality Functional Capacity Assessment Tool (VRFCAT) was the computer-based measure of functional capacity. We used the MATRICS Consensus Cognitive Battery (MCCB) as an objective measure of neurocognition and the UCSD Performance-Based Skills Assessment (UPSA) to assess functional capacity performance. The Global Functioning Scale: Role and Social, and the Role Functioning Scale were used to assess work and school performance, familial interactions, and social functioning. Results We were able to confirm that the deficit in functional capacity performance measured using VRFCAT is present in the early course of schizophrenia in that the patients were slower and committed more errors (M=830.41) as compared with normal controls (M=716.84; t=3.0, p<.01). Virtual reality based assessment of functional capacity was correlated with objective measures of neurocognition (MCCB Overall Composite), r=-.71, p=<.01, standard approaches to functional capacity assessment (UPSA), r=-.66, p=<.01, work and school functioning (r=-.52, p<.01), and level of social relationships (r=-.43, p=<.03), but not familial relationships (r=-.03, p=.87). Interestingly, neither neurocognition (MCCB) nor functional capacity performance (UPSA) were correlated with the level of familial relationships. Discussion We extend previous findings in that even patients in the early course of schizophrenia showed virtual reality based functional capacity performance deficits when compared with normal control subjects. Virtual reality based performance was correlated with neurocognition, suggesting that it may be sensitive to changes in cognition. Furthermore, correlations with everyday work/school and social functioning indicate promise as a co-primary measure to index change in functioning in response to treatment. Interestingly, none of our measures of functional capacity or neurocognition were correlated with familial relationships indicating that the determinates of family interactions might be driven by factors other than cognitive capacities.

A Prototype Tool to Enable Farmers to Measure and Improve the Welfare Performance of the Farm Animal Enterprise: The Unified Field Index

PubMed Central

Colditz, Ian G.; Ferguson, Drewe M.; Collins, Teresa; Matthews, Lindsay; Hemsworth, Paul H.

2014-01-01

Simple Summary Benchmarking is a tool widely used in agricultural industries that harnesses the experience of farmers to generate knowledge of practices that lead to better on-farm productivity and performance. We propose, by analogy with production performance, a method for measuring the animal welfare performance of an enterprise and describe a tool for farmers to monitor and improve the animal welfare performance of their business. A general framework is outlined for assessing and monitoring risks to animal welfare based on measures of animals, the environment they are kept in and how they are managed. The tool would enable farmers to continually improve animal welfare. Abstract Schemes for the assessment of farm animal welfare and assurance of welfare standards have proliferated in recent years. An acknowledged short-coming has been the lack of impact of these schemes on the welfare standards achieved on farm due in part to sociological factors concerning their implementation. Here we propose the concept of welfare performance based on a broad set of performance attributes of an enterprise and describe a tool based on risk assessment and benchmarking methods for measuring and managing welfare performance. The tool termed the Unified Field Index is presented in a general form comprising three modules addressing animal, resource, and management factors. Domains within these modules accommodate the principle conceptual perspectives for welfare assessment: biological functioning; emotional states; and naturalness. Pan-enterprise analysis in any livestock sector could be used to benchmark welfare performance of individual enterprises and also provide statistics of welfare performance for the livestock sector. An advantage of this concept of welfare performance is its use of continuous scales of measurement rather than traditional pass/fail measures. Through the feedback provided via benchmarking, the tool should help farmers better engage in on-going improvement of farm practices that affect animal welfare. PMID:26480317
Evaluation methodologies for an advanced information processing system

NASA Technical Reports Server (NTRS)

Schabowsky, R. S., Jr.; Gai, E.; Walker, B. K.; Lala, J. H.; Motyka, P.

1984-01-01

The system concept and requirements for an Advanced Information Processing System (AIPS) are briefly described, but the emphasis of this paper is on the evaluation methodologies being developed and utilized in the AIPS program. The evaluation tasks include hardware reliability, maintainability and availability, software reliability, performance, and performability. Hardware RMA and software reliability are addressed with Markov modeling techniques. The performance analysis for AIPS is based on queueing theory. Performability is a measure of merit which combines system reliability and performance measures. The probability laws of the performance measures are obtained from the Markov reliability models. Scalar functions of this law such as the mean and variance provide measures of merit in the AIPS performability evaluations.
Assessing physical functioning on pain management programmes: the unique contribution of directly assessed physical performance measures and their relationship to self-reports

PubMed Central

Guildford, Beth J; Jacobs, Clair M; Daly-Eichenhardt, Aisling; Scott, Whitney; McCracken, Lance M

2016-01-01

Physical functioning is a recommended outcome domain for pain management programmes. It can be assessed by self-report and by direct assessment of performance. Although physical performance measures may provide unique and useful information about patient functioning over and above self-report measures, it is not entirely clear which of the many possible performances to assess. This study investigated a battery of three directly assessed physical performance measures and their relationship to three currently used self-report measures of general health and functioning. The three performance measures were sensitive to treatment; patients performed significantly better on all three measures following completion of the pain management programme. The three performance measures were shown to represent a single underlying dimension, and there was a significant degree of overlap between them. The performance measures were shown to be relevant in explaining variation in the self-report measures, as well as to offer a clinically relevant different dimension of assessment to self-report. Future research could focus on developing performance-based measures that capture quality of movement and that are sensitive to relevant processes of therapeutic change. PMID:28386404
Modeling the Performance of Direct-Detection Doppler Lidar Systems in Real Atmospheres

NASA Technical Reports Server (NTRS)

McGill, Matthew J.; Hart, William D.; McKay, Jack A.; Spinhirne, James D.

1999-01-01

Previous modeling of the performance of spaceborne direct-detection Doppler lidar systems has assumed extremely idealized atmospheric models. Here we develop a technique for modeling the performance of these systems in a more realistic atmosphere, based on actual airborne lidar observations. The resulting atmospheric model contains cloud and aerosol variability that is absent in other simulations of spaceborne Doppler lidar instruments. To produce a realistic simulation of daytime performance, we include solar radiance values that are based on actual measurements and are allowed to vary as the viewing scene changes. Simulations are performed for two types of direct-detection Doppler lidar systems: the double-edge and the multi-channel techniques. Both systems were optimized to measure winds from Rayleigh backscatter at 355 nm. Simulations show that the measurement uncertainty during daytime is degraded by only about 10-20% compared to nighttime performance, provided a proper solar filter is included in the instrument design.
Modeling the performance of direct-detection Doppler lidar systems including cloud and solar background variability.

PubMed

McGill, M J; Hart, W D; McKay, J A; Spinhirne, J D

1999-10-20

Previous modeling of the performance of spaceborne direct-detection Doppler lidar systems assumed extremely idealized atmospheric models. Here we develop a technique for modeling the performance of these systems in a more realistic atmosphere, based on actual airborne lidar observations. The resulting atmospheric model contains cloud and aerosol variability that is absent in other simulations of spaceborne Doppler lidar instruments. To produce a realistic simulation of daytime performance, we include solar radiance values that are based on actual measurements and are allowed to vary as the viewing scene changes. Simulations are performed for two types of direct-detection Doppler lidar system: the double-edge and the multichannel techniques. Both systems were optimized to measure winds from Rayleigh backscatter at 355 nm. Simulations show that the measurement uncertainty during daytime is degraded by only approximately 10-20% compared with nighttime performance, provided that a proper solar filter is included in the instrument design.
Highlights of Conference on Using Student Test Scores to Measure Teacher Performance: The State of the Art in Research and Practice

ERIC Educational Resources Information Center

Guarino, Cassandra; Reckase, Mark D.; Wooldridge, Jeffrey M.

2013-01-01

The push for accountability in public schooling has extended to the measurement of teacher performance, accelerated by federal efforts through Race to the Top. Currently, a large number of states and districts across the country are computing measures of teacher performance based on the standardized test scores of their students and using them to…
Automating Performance Measures and Clinical Practice Guidelines: Differences and Complementarities.

PubMed

Tu, Samson W; Martins, Susana; Oshiro, Connie; Yuen, Kaeli; Wang, Dan; Robinson, Amy; Ashcraft, Michael; Heidenreich, Paul A; Goldstein, Mary K

2016-01-01

Through close analysis of two pairs of systems that implement the automated evaluation of performance measures (PMs) and guideline-based clinical decision support (CDS), we contrast differences in their knowledge encoding and necessary changes to a CDS system that provides management recommendations for patients failing performance measures. We trace the sources of differences to the implementation environments and goals of PMs and CDS.
Accuracy assessment for a multi-parameter optical calliper in on line automotive applications

NASA Astrophysics Data System (ADS)

D'Emilia, G.; Di Gasbarro, D.; Gaspari, A.; Natale, E.

2017-08-01

In this work, a methodological approach based on the evaluation of the measurement uncertainty is applied to an experimental test case, related to the automotive sector. The uncertainty model for different measurement procedures of a high-accuracy optical gauge is discussed in order to individuate the best measuring performances of the system for on-line applications and when the measurement requirements are becoming more stringent. In particular, with reference to the industrial production and control strategies of high-performing turbochargers, two uncertainty models are proposed, discussed and compared, to be used by the optical calliper. Models are based on an integrated approach between measurement methods and production best practices to emphasize their mutual coherence. The paper shows the possible advantages deriving from the considerations that the measurement uncertainty modelling provides, in order to keep control of the uncertainty propagation on all the indirect measurements useful for production statistical control, on which basing further improvements.
Leadership Strategies of Performance Measures Impacts in Public Sector Management: A National Content Analysis.

ERIC Educational Resources Information Center

Kubala, James Joseph

A quantitative and qualitative study examined three leadership strategies found in performance-based management (human resource, scientific management and political strategies used in public sector management); a framework by which performance measurement (PM) supports leadership strategies; and how the strategies impact PM. It examined leadership…
What does a Performance Measurement System Tell Us about the National Comprehensive Cancer Control Program?

PubMed Central

Townsend, Julie S.; Moore, Angela R.; Mulder, Tiffani N.; Boyd, Mary

2015-01-01

Context The National Comprehensive Cancer Control Program (NCCCP) performance measurement system seeks to understand both the processes that funded programs undertake with their respective coalitions to implement the objectives of their cancer plans and outcomes of those efforts. Objective To identify areas of achievement and technical assistance needs of NCCCP awardees. Design Program performance was assessed through surveys completed by program directors on performance indicators in 2009 and 2010 and queries from a web-based management information system in 2011 and 2012. Setting Programs funded by CDC’s NCCCP. Participants 69 programs. Main Outcome Measure(s) The key performance measures assessed were: inclusion of diverse partners and key sectors in cancer coalitions; partners’ involvement in activities; receiving in-kind resources from partners; using evidence-based interventions and data for setting priorities; conducting program evaluation; using community- or organization-level strategies to address cancer control efforts; and demonstrating progress toward achieving health outcomes. Results Most programs reported having active coalitions that represent diverse organizational sectors. Nearly all programs routinely assess the burden of cancer. In-kind resources to implement activities peaked at $64,716 in the second year of a five year funding cycle, and declined in subsequent project years. By year 3, over 70% of programs reported having an evaluation plan. While programs reported that nearly two-thirds of their interventions were evidence-based, some programs implemented non-evidence-based interventions. A majority of programs successfully used at least one community- or organization-level change strategy. However, many programs did not incorporate objectives linked to health outcomes as they reported progress in implementing interventions. Conclusions: While NCCCP programs were strong at building and maintaining infrastructure, some programs may need additional technical assistance to increase the adoption of evidence-based interventions, develop solid and responsive evaluation plans, and better link efforts to population-based measures that demonstrate impact toward reducing the burden of cancer. PMID:25136936
A practical approach to competency assessment.

PubMed

Claflin, N

1997-01-01

Assessing clinical performance is difficult. Members of the Nursing Service Clinical Practice Committee at the Carl T. Hayden Veterans Affairs Medical Center in Phoenix developed a comprehensive program of competency assessment based on performance measures. This article describes the committee's process of developing and implementing the program and includes a blueprint for competency assessment and selected performance measures for all nursing staff who provide patient care. The approach to competency assessment includes performance measures specific to patients' ages.
Measuring Exposure to Direct-to-Consumer Advertising—A Validation Study in the Context of Cancer-Related Treatment Advertising

PubMed Central

Tan, Andy SL; Hornik, Robert C

2014-01-01

This research examines two recurrent conceptual issues of measuring media exposure in survey research in the context of cancer-related direct-to-consumer advertising (CR-DTCA)—the level of content specificity of survey items and the benefits of providing exemplars to aid recall. We evaluated three candidate measures of cancer patients’ self-reported exposure to CR-DTCA; these measures varied in content specificity and provision of ad exemplars. Using data from two distinct population-based surveys, we assessed the performance of each measure based on several reliability and validity criteria. Results across both surveys indicate that all three measures performed equally well in terms of internal consistency, convergent, nomological, and discriminant validity with a few minor differences between these measures. Increased content specificity or inclusion of ad exemplars did not result in better performance of the exposure measures. Participants were able to extrapolate from ad exemplars to report their exposure to broad categories of CR-DTCA. The briefest of the three measures posed the lowest level of survey costs among the three measures and was deployed successfully for both mailed and internet-based survey administration. We discussed future directions for application of these findings in DTCA research for other illness and for media exposure research more generally. PMID:24693332
Analysis of Multi-Antenna GNSS Receiver Performance under Jamming Attacks.

PubMed

Vagle, Niranjana; Broumandan, Ali; Lachapelle, Gérard

2016-11-17

Although antenna array-based Global Navigation Satellite System (GNSS) receivers can be used to mitigate both narrowband and wideband electronic interference sources, measurement distortions induced by array processing methods are not suitable for high precision applications. The measurement distortions have an adverse effect on the carrier phase ambiguity resolution, affecting the navigation solution. Depending on the array attitude information availability and calibration parameters, different spatial processing methods can be implemented although they distort carrier phase measurements in some cases. This paper provides a detailed investigation of the effect of different array processing techniques on array-based GNSS receiver measurements and navigation performance. The main novelty of the paper is to provide a thorough analysis of array-based GNSS receivers employing different beamforming techniques from tracking to navigation solution. Two beamforming techniques, namely Power Minimization (PM) and Minimum Power Distortionless Response (MPDR), are being investigated. In the tracking domain, the carrier Doppler, Phase Lock Indicator (PLI), and Carrier-to-Noise Ratio (C/N₀) are analyzed. Pseudorange and carrier phase measurement distortions and carrier phase position performance are also evaluated. Performance analyses results from simulated GNSS signals and field tests are provided.
Measuring Perceived Motivational Climate in Physical Education

ERIC Educational Resources Information Center

Papaioannou, Athanasios G.; Tsigilis, Nikolaos; Kosmidou, Eudoxia; Milosis, Dimitrios

2007-01-01

A new instrument of motivational climate in physical education is presented with the goal of measuring perceptions of teachers' emphasis on mastery, performance-approach, performance-avoidance, and social approval goals. The measure was based on the principle of compatibility, according to which climate perceptions and achievement goals should be…
Multi-Modal Performance Measures in Oregon: Developing a Transportation Cost Index Based Upon Multi-Modal Network and Land Use Information

DOT National Transportation Integrated Search

2016-02-01

Transportation Cost Index is a performance measure for transportation and land use systems originally proposed and piloted by Reiff and Gregor (2005). It fills important niches of existing similar measures in term of policy areas covered and type of ...
Application of neural based estimation algorithm for gait phases of above knee prosthesis.

PubMed

Tileylioğlu, E; Yilmaz, A

2015-01-01

In this study, two gait phase estimation methods which utilize a rule based quantization and an artificial neural network model respectively are developed and applied for the microcontroller based semi-active knee prosthesis in order to respond user demands and adapt environmental conditions. In this context, an experimental environment in which gait data collected synchronously from both inertial and image based measurement systems has been set up. The inertial measurement system that incorporates MEM accelerometers and gyroscopes is used to perform direct motion measurement through the microcontroller, while the image based measurement system is employed for producing the verification data and assessing the success of the prosthesis. Embedded algorithms dynamically normalize the input data prior to gait phase estimation. The real time analyses of two methods revealed that embedded ANN based approach performs slightly better in comparison with the rule based algorithm and has advantage of being easily-scalable, thus able to accommodate additional input parameters considering the microcontroller constraints.
78 FR 79697 - Statement of Organization, Functions, and Delegations of Authority

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-31

... new initiatives based on emerging issues, science, and policy; (6) supports the harmonization and..., and programmatic efforts; (10) manages evaluation fellowship; (11) guides performance-based strategic... improvement based on effective program evaluation, and performance measurement; (14) supports evidence-driven...
Curriculum-Based Measures in Writing: A School-Based Evaluation of Predictive Validity

ERIC Educational Resources Information Center

Terenzi, Christina M.

2009-01-01

Recent research in the area of Curriculum-Based Measures (CBM) in writing has shown that traditionally used metrics, such as total words written and total words correct, may not be the best tools for measuring writing performance, for both secondary and elementary aged children (e.g., Gansle, Noell, VanDerHeyden, Naquin, & Slider, 2002; Tindal…
Uncertainty estimates of purity measurements based on current information: toward a "live validation" of purity methods.

PubMed

Apostol, Izydor; Kelner, Drew; Jiang, Xinzhao Grace; Huang, Gang; Wypych, Jette; Zhang, Xin; Gastwirt, Jessica; Chen, Kenneth; Fodor, Szilan; Hapuarachchi, Suminda; Meriage, Dave; Ye, Frank; Poppe, Leszek; Szpankowski, Wojciech

2012-12-01

To predict precision and other performance characteristics of chromatographic purity methods, which represent the most widely used form of analysis in the biopharmaceutical industry. We have conducted a comprehensive survey of purity methods, and show that all performance characteristics fall within narrow measurement ranges. This observation was used to develop a model called Uncertainty Based on Current Information (UBCI), which expresses these performance characteristics as a function of the signal and noise levels, hardware specifications, and software settings. We applied the UCBI model to assess the uncertainty of purity measurements, and compared the results to those from conventional qualification. We demonstrated that the UBCI model is suitable to dynamically assess method performance characteristics, based on information extracted from individual chromatograms. The model provides an opportunity for streamlining qualification and validation studies by implementing a "live validation" of test results utilizing UBCI as a concurrent assessment of measurement uncertainty. Therefore, UBCI can potentially mitigate the challenges associated with laborious conventional method validation and facilitates the introduction of more advanced analytical technologies during the method lifecycle.
SELECTION OF ENDOCRINOLOGY SUBSPECIALTY TRAINEES: WHICH APPLICANT CHARACTERISTICS ARE ASSOCIATED WITH PERFORMANCE DURING FELLOWSHIP TRAINING?

PubMed

Natt, Neena; Chang, Alice Y; Berbari, Elie F; Kennel, Kurt A; Kearns, Ann E

2016-01-01

To determine which residency characteristics are associated with performance during endocrinology fellowship training as measured by competency-based faculty evaluation scores and faculty global ratings of trainee performance. We performed a retrospective review of interview applications from endocrinology fellows who graduated from a single academic institution between 2006 and 2013. Performance measures included competency-based faculty evaluation scores and faculty global ratings. The association between applicant characteristics and measures of performance during fellowship was examined by linear regression. The presence of a laudatory comparative statement in the residency program director's letter of recommendation (LoR) or experience as a chief resident was significantly associated with competency-based faculty evaluation scores (β = 0.22, P = .001; and β = 0.24, P = .009, respectively) and faculty global ratings (β = 0.85, P = .006; and β = 0.96, P = .015, respectively). The presence of a laudatory comparative statement in the residency program director's LoR or experience as a chief resident were significantly associated with overall performance during subspecialty fellowship training. Future studies are needed in other cohorts to determine the broader implications of these findings in the application and selection process.

Development of performance measures for non-motorized dynamics.

DOT National Transportation Integrated Search

2013-12-27

This report recommends performance measures for non-motorized (pedestrian and bicyclists) : traffic safety for Michigan cities. Based on the data collected from four Michigan cities, Ann : Arbor, East Lansing, Flint, and Grand Rapids, the research te...
A Comparison of Common and Novel Curriculum-Based Measurement of Reading Decision Rules to Predict Spring Performance for Students Receiving Supplemental Interventions

ERIC Educational Resources Information Center

Van Norman, Ethan R.; Parker, David C.

2018-01-01

Recent simulations suggest that trend line decision rules applied to curriculum-based measurement of reading progress monitoring data may lead to inaccurate interpretations unless data are collected for upward of 3 months. The authors of those studies did not manipulate goal line slope or account for a student's level of initial performance when…
Developing Performance Measures for Army Aviation Collective Training

DTIC Science & Technology

2011-05-01

simulation-based training, such as ATX, is determined by performance improvement of participants within the virtual-training environment (Bell & Waag ...of the collective behavior (Bell & Waag , 1998). In ATX, system-based (i.e., simulator) data can be used to extract measures such as timing of events...to CABs. 20 21 References Bell, H. H., & Waag , W. L. (1998). Evaluating the effectiveness of flight simulators for training combat
Constrained independent component analysis approach to nonobtrusive pulse rate measurements

NASA Astrophysics Data System (ADS)

Tsouri, Gill R.; Kyal, Survi; Dianat, Sohail; Mestha, Lalit K.

2012-07-01

Nonobtrusive pulse rate measurement using a webcam is considered. We demonstrate how state-of-the-art algorithms based on independent component analysis suffer from a sorting problem which hinders their performance, and propose a novel algorithm based on constrained independent component analysis to improve performance. We present how the proposed algorithm extracts a photoplethysmography signal and resolves the sorting problem. In addition, we perform a comparative study between the proposed algorithm and state-of-the-art algorithms over 45 video streams using a finger probe oxymeter for reference measurements. The proposed algorithm provides improved accuracy: the root mean square error is decreased from 20.6 and 9.5 beats per minute (bpm) for existing algorithms to 3.5 bpm for the proposed algorithm. An error of 3.5 bpm is within the inaccuracy expected from the reference measurements. This implies that the proposed algorithm provided performance of equal accuracy to the finger probe oximeter.
Optimization and performance evaluation of a conical mirror based fluorescence molecular tomography imaging system

NASA Astrophysics Data System (ADS)

Zhao, Yue; Zhang, Wei; Zhu, Dianwen; Li, Changqing

2016-03-01

We performed numerical simulations and phantom experiments with a conical mirror based fluorescence molecular tomography (FMT) imaging system to optimize its performance. With phantom experiments, we have compared three measurement modes in FMT: the whole surface measurement mode, the transmission mode, and the reflection mode. Our results indicated that the whole surface measurement mode performed the best. Then, we applied two different neutral density (ND) filters to improve the measurement's dynamic range. The benefits from ND filters are not as much as predicted. Finally, with numerical simulations, we have compared two laser excitation patterns: line and point. With the same excitation position number, we found that the line laser excitation had slightly better FMT reconstruction results than the point laser excitation. In the future, we will implement Monte Carlo ray tracing simulations to calculate multiple reflection photons, and create a look-up table accordingly for calibration.
Constrained independent component analysis approach to nonobtrusive pulse rate measurements.

PubMed

Tsouri, Gill R; Kyal, Survi; Dianat, Sohail; Mestha, Lalit K

2012-07-01

Nonobtrusive pulse rate measurement using a webcam is considered. We demonstrate how state-of-the-art algorithms based on independent component analysis suffer from a sorting problem which hinders their performance, and propose a novel algorithm based on constrained independent component analysis to improve performance. We present how the proposed algorithm extracts a photoplethysmography signal and resolves the sorting problem. In addition, we perform a comparative study between the proposed algorithm and state-of-the-art algorithms over 45 video streams using a finger probe oxymeter for reference measurements. The proposed algorithm provides improved accuracy: the root mean square error is decreased from 20.6 and 9.5 beats per minute (bpm) for existing algorithms to 3.5 bpm for the proposed algorithm. An error of 3.5 bpm is within the inaccuracy expected from the reference measurements. This implies that the proposed algorithm provided performance of equal accuracy to the finger probe oximeter.
Value-based purchasing and hospital acquired conditions: are we seeing improvement?

PubMed

Spaulding, Aaron; Zhao, Mei; Haley, D Rob

2014-12-01

To determine if the Value-Based Purchasing Performance Scoring system correlates with hospital acquired condition quality indicators. This study utilizes the following secondary data sources: the American Hospital Association (AHA) annual survey and the Centers for Medicare and Medicaid (CMS) Value-Based Purchasing and Hospital Acquired Conditions databases. Zero-inflated negative binomial regression was used to examine the effect of CMS total performance score on counts of hospital acquired conditions. Hospital structure variables including size, ownership, teaching status, payer mix, case mix, and location were utilized as control variables. The secondary data sources were merged into a single database using Stata 10. Total performance scores, which are used to determine if hospitals should receive incentive money, do not correlate well with quality outcome in the form of hospital acquired conditions. Value-based purchasing does not appear to correlate with improved quality and patient safety as indicated by Hospital Acquired Condition (HAC) scores. This leads us to believe that either the total performance score does not measure what it should, or the quality outcome measurements do not reflect the quality of the total performance scores measure. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.
The Beast of Aggregating Cognitive Load Measures in Technology-Based Learning

ERIC Educational Resources Information Center

Leppink, Jimmie; van Merriënboer, Jeroen J. G.

2015-01-01

An increasing part of cognitive load research in technology-based learning includes a component of repeated measurements, that is: participants are measured two or more times on the same performance, mental effort or other variable of interest. In many cases, researchers aggregate scores obtained from repeated measurements to one single sum or…
A new performance measurement system for maternal and child health in the United States.

PubMed

Kogan, Michael D; Dykton, Christopher; Hirai, Ashley H; Strickland, Bonnie B; Bethell, Christina D; Naqvi, Iran; Cano, Carlos E; Downing-Futrell, Sheri L; Lu, Michael C

2015-05-01

The Title V Maternal and Child Health (MCH) Block Grant is the linchpin for US MCH services. The first national performance measures (NPMs) for MCH were instituted in 1997. Changing trends in MCH risk factors, outcomes, health services, data sources, and advances in scientific knowledge, in conjunction with budgetary constraints led the Maternal and Child Health Bureau (MCHB) to design a new performance measurement system. A workgroup was formed to develop a new system. The following guiding principles were used: (1) Afford States more flexibility and reduce the overall reporting burden; (2) Improve accountability to better document Title V's impact; (3) Develop NPMs that encompass measures in: maternal and women's health, perinatal health, child health, children with special health care needs, adolescent health, and cross-cutting areas. A three-tiered performance measurement system was proposed with national outcome measures (NOMs), NPMs and evidence-based/informed strategy measures (ESMs). NOMs are the ultimate goals that MCHB and States are attempting to achieve. NPMs are measures, generally associated with processes or programs, shown to affect NOMs. ESMs are evidence-based or informed measures that each State Title V program develops to affect the NPMs. There are 15 NPMs from which States select eight, with at least one from each population area. MCHB will provide the data for the NOMs and NPMs, when possible. The new performance measurement system increases the flexibility and reduces the reporting burden for States by allowing them to choose 8 NPMs to target, and increases accountability by having States develop actionable ESMs. The new national performance measure framework for maternal and child health will allow States more flexibility to address their areas of greatest need, reduce their data reporting burden by having the Maternal and Child Health Bureau provide data for the National Outcome and Performance Measures, yet afford States the opportunity to develop measurable strategies to address their selected performance measures.
Assessing segment- and corridor-based travel-time reliability on urban freeways : final report.

DOT National Transportation Integrated Search

2016-09-01

Travel time and its reliability are intuitive performance measures for freeway traffic operations. The objective of this project was to quantify segment-based and corridor-based travel time reliability measures on urban freeways. To achieve this obje...
ACCF/AHA methodology for the development of quality measures for cardiovascular technology: a report of the American College of Cardiology Foundation/American Heart Association Task Force on Performance Measures.

PubMed

Bonow, Robert O; Douglas, Pamela S; Buxton, Alfred E; Cohen, David J; Curtis, Jeptha P; Delong, Elizabeth; Drozda, Joseph P; Ferguson, T Bruce; Heidenreich, Paul A; Hendel, Robert C; Masoudi, Frederick A; Peterson, Eric D; Taylor, Allen J

2011-09-27

Consistent with the growing national focus on healthcare quality, the American College of Cardiology Foundation (ACCF) and the American Heart Association (AHA) have taken a leadership role over the past decade in developing measures of the quality of cardiovascular care by convening a joint ACCF/AHA Task Force on Performance Measures. The Task Force is charged with identifying the clinical topics appropriate for the development of performance measures and with assembling writing committees composed of clinical and methodological experts in collaboration with appropriate subspecialty societies. The Task Force has also created methodology documents that offer guidance in the development of process, outcome, composite, and efficiency measures. Cardiovascular performance measures using existing ACCF/AHA methodology are based on Class I or Class III guidelines recommendations, usually with Level A evidence. These performance measures, based on evidence-based ACCF/AHA guidelines, remain the most rigorous quality measures for both internal quality improvement and public reporting. However, many of the tools for diagnosis and treatment of cardiovascular disease involve advanced technologies, such as cardiac imaging, for which there are often no underlying guideline documents. Because these technologies affect the quality of cardiovascular care and also have the potential to contribute to cardiovascular health expenditures, there is a need for more critical assessment of the use of technology, including the development of quality and performance measures in areas in which guideline recommendations are absent. The evaluation of quality in the use of cardiovascular technologies requires consideration of multiple parameters that differ from other healthcare processes. The present document describes methodology for development of 2 new classes of quality measures in these situations, appropriate use measures and structure/safety measures. Appropriate use measures are based on specific indications, processes, or parameters of care for which high level of evidence data and Class I or Class III guideline recommendations may be lacking but are addressed in ACCF appropriate use criteria documents. Structure/safety measures represent measures developed to address structural aspects of the use of healthcare technology (e.g., laboratory accreditation, personnel training, and credentialing) or quality issues related to patient safety when there are neither guidelines recommendations nor appropriate use criteria. Although the strength of evidence for appropriate use measures and structure/safety measures may not be as strong as that for formal performance measures, they are quality measures that are otherwise rigorously developed, reviewed, tested, and approved in the same manner as ACCF/AHA performance measures. The ultimate goal of the present document is to provide direction in defining and measuring the appropriate use-avoiding not only underuse but also overuse and misuse-and proper application of cardiovascular technology and to describe how such appropriate use measures and structure/safety measures might be developed for the purposes of quality improvement and public reporting. It is anticipated that this effort will help focus the national dialogue on the use of cardiovascular technology and away from the current concerns about volume and cost alone to a more holistic emphasis on value.
Comparative Analysis of Mass Spectral Similarity Measures on Peak Alignment for Comprehensive Two-Dimensional Gas Chromatography Mass Spectrometry

PubMed Central

2013-01-01

Peak alignment is a critical procedure in mass spectrometry-based biomarker discovery in metabolomics. One of peak alignment approaches to comprehensive two-dimensional gas chromatography mass spectrometry (GC×GC-MS) data is peak matching-based alignment. A key to the peak matching-based alignment is the calculation of mass spectral similarity scores. Various mass spectral similarity measures have been developed mainly for compound identification, but the effect of these spectral similarity measures on the performance of peak matching-based alignment still remains unknown. Therefore, we selected five mass spectral similarity measures, cosine correlation, Pearson's correlation, Spearman's correlation, partial correlation, and part correlation, and examined their effects on peak alignment using two sets of experimental GC×GC-MS data. The results show that the spectral similarity measure does not affect the alignment accuracy significantly in analysis of data from less complex samples, while the partial correlation performs much better than other spectral similarity measures when analyzing experimental data acquired from complex biological samples. PMID:24151524
End-Use Load and Conservation Assessment Program : Co-Instrumentation Test of Two Microcomputer-Based Energy Monitoring Systems.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fishbaugher, M. J.

1985-05-01

The decreasing cost of microcomputers along with improvements in power metering circuitry have changed the way in which electrical energy use is monitored. Although utilities still rely on kilowatt-hour (kWh) meters for billing purposes, a microcomputer-based monitoring system is used when greater temporal and end-use resolution is desired. Because these types of monitoring systems will be used increasingly in large-scale conservation and end-use studies, it is important that their performance be analyzed to determine their accuracy. A co-instrumentation test was devised in which two such microcomputer-based monitoring systems made simultaneous measurements of electrical end-uses in two commercial buildings. The analysismore » of the co-instrumentation data aids in the evaluation of microcomputer-based monitoring systems used for end-use measurements. Separate and independent data loggers were used to measure the same loads simultaneously. In addition to these two systems, a utility billing meter measured the total energy use in each building during the co-instrumentation test. The utility's meters provided a relatively accurate standard by which the performance of both loggers could be judged. The comparison between the SCL and PNL microcomputer-based loggers has shown that power measurement techniques directly affect system performance. The co-instrumentation test has shown that there are certain standards that a monitoring system must meet if it is to perform well. First, it is essential to calibrate a microcomputer-based logger against a known standard load before the system is installed. Second, a microcomputer-based system must have some way of accounting for power factors. Recent advances in power metering circuitry have made it relatively easy to apply these power factors automatically in real time.« less
The Transition from Business as Usual to Funding for Results: State Efforts To Integrate Performance Measures in the Higher Education Budgetary Process.

ERIC Educational Resources Information Center

Albright, Brenda Norman

This report describes a 1997 survey which examined performance funding in higher education and offers guidelines for states' and institutions' explorations of performance-based funding. Among highlights of the survey are: 32 states are planning or using performance measures in the state budget process; legislatively mandated initiatives are…
Identity Affirmed, Agency Engaged: Culturally Responsive Performance-Based Assessment

ERIC Educational Resources Information Center

Rosa, Ricardo

2017-01-01

Performance-based assessment is unquestionably superior to the instrumental rationality of high-stakes standardized testing and the audit culture that testing regimes inspire. It is more likely to engender opportunities to witness the un-measureable: vision, imagination, and compassion. Performance assessments must be culturally responsive in…
Kilohertz VLIF (volumetric laser induced fluorescence) measurements in a seeded free gas-phase jet in the transitionally turbulent flow regime

NASA Astrophysics Data System (ADS)

Wu, Yue; Xu, Wenjiang; Ma, Lin

2018-03-01

This paper reports the demonstration of instantaneous three-dimension (3D) measurements in turbulent flows at repetition rates up to 10 kHz using VLIF (volumetric laser induced fluorescence). The measurements were performed based on the LIF signal of iodine (I2) vapor seeded in the flow. The LIF signals of I2 vapor were generated volumetrically by a thick laser slab and then simultaneously captured by a total of seven cameras from different perspectives, based on which a 3D tomographic reconstruction was performed to obtain the 3D distribution of I2 vapor concentration. Single-shot measurements obtained in a duration of hundreds of nanoseconds (limited by the pulse duration of the excitation laser) were demonstrated in a 50 × 50 × 50 mm3 at a repetition rate up to 10 kHz. These measurements demonstrated the feasibility and potential of VLIF for resolving the 4D spatiotemporal dynamics of turbulent flows. Based on the experimental results obtained, this work also studied the VLIF signal level and its effects on the reconstruction accuracy under different the measurement conditions, illustrating the capabilities and limitations of performing high speed VLIF measurements.
High-Performance Sensors Based on Resistance Fluctuations of Single-Layer-Graphene Transistors.

PubMed

Amin, Kazi Rafsanjani; Bid, Aveek

2015-09-09

One of the most interesting predicted applications of graphene-monolayer-based devices is as high-quality sensors. In this article, we show, through systematic experiments, a chemical vapor sensor based on the measurement of low-frequency resistance fluctuations of single-layer-graphene field-effect-transistor devices. The sensor has extremely high sensitivity, very high specificity, high fidelity, and fast response times. The performance of the device using this scheme of measurement (which uses resistance fluctuations as the detection parameter) is more than 2 orders of magnitude better than a detection scheme in which changes in the average value of the resistance is monitored. We propose a number-density-fluctuation-based model to explain the superior characteristics of a noise-measurement-based detection scheme presented in this article.
Effects of a Velocity-Vector Based Command Augmentation System and Synthetic Vision System Terrain Portrayal and Guidance Symbology Concepts on Single-Pilot Performance

NASA Technical Reports Server (NTRS)

Liu, Dahai; Goodrich, Kenneth H.; Peak, Bob

2010-01-01

This study investigated the effects of synthetic vision system (SVS) concepts and advanced flight controls on the performance of pilots flying a light, single-engine general aviation airplane. We evaluated the effects and interactions of two levels of terrain portrayal, guidance symbology, and flight control response type on pilot performance during the conduct of a relatively complex instrument approach procedure. The terrain and guidance presentations were evaluated as elements of an integrated primary flight display system. The approach procedure used in the study included a steeply descending, curved segment as might be encountered in emerging, required navigation performance (RNP) based procedures. Pilot performance measures consisted of flight technical performance, perceived workload, perceived situational awareness and subjective preference. The results revealed that an elevation based generic terrain portrayal significantly improved perceived situation awareness without adversely affecting flight technical performance or workload. Other factors (pilot instrument rating, control response type, and guidance symbology) were not found to significantly affect the performance measures.
Does adding clinical data to administrative data improve agreement among hospital quality measures?

PubMed

Hanchate, Amresh D; Stolzmann, Kelly L; Rosen, Amy K; Fink, Aaron S; Shwartz, Michael; Ash, Arlene S; Abdulkerim, Hassen; Pugh, Mary Jo V; Shokeen, Priti; Borzecki, Ann

2017-09-01

Hospital performance measures based on patient mortality and readmission have indicated modest rates of agreement. We examined if combining clinical data on laboratory tests and vital signs with administrative data leads to improved agreement with each other, and with other measures of hospital performance in the nation's largest integrated health care system. We used patient-level administrative and clinical data, and hospital-level data on quality indicators, for 2007-2010 from the Veterans Health Administration (VA). For patients admitted for acute myocardial infarction (AMI), heart failure (HF) and pneumonia we examined changes in hospital performance on 30-d mortality and 30-d readmission rates as a result of adding clinical data to administrative data. We evaluated whether this enhancement yielded improved measures of hospital quality, based on concordance with other hospital quality indicators. For 30-d mortality, data enhancement improved model performance, and significantly changed hospital performance profiles; for 30-d readmission, the impact was modest. Concordance between enhanced measures of both outcomes, and with other hospital quality measures - including Joint Commission process measures, VA Surgical Quality Improvement Program (VASQIP) mortality and morbidity, and case volume - remained poor. Adding laboratory tests and vital signs to measure hospital performance on mortality and readmission did not improve the poor rates of agreement across hospital quality indicators in the VA. Efforts to improve risk adjustment models should continue; however, evidence of validation should precede their use as reliable measures of quality. Published by Elsevier Inc.
Where should Momma go? Current nursing home performance measurement strategies and a less ambitious approach.

PubMed

Phillips, Charles D; Hawes, Catherine; Lieberman, Trudy; Koren, Mary Jane

2007-06-25

Nursing home performance measurement systems are practically ubiquitous. The vast majority of these systems aspire to rank order all nursing homes based on quantitative measures of quality. However, the ability of such systems to identify homes differing in quality is hampered by the multidimensional nature of nursing homes and their residents. As a result, the authors doubt the ability of many nursing home performance systems to truly help consumers differentiate among homes providing different levels of quality. We also argue that, for consumers, performance measurement models are better at identifying problem facilities than potentially good homes. In response to these concerns we present a proposal for a less ambitious approach to nursing home performance measurement than previously used. We believe consumers can make better informed choice using a simpler system designed to pinpoint poor-quality nursing homes, rather than one designed to rank hundreds of facilities based on differences in quality-of-care indicators that are of questionable importance. The suggested performance model is based on five principles used in the development of the Consumers Union 2006 Nursing Home Quality Monitor. We can best serve policy-makers and consumers by eschewing nursing home reporting systems that present information about all the facilities in a city, a state, or the nation on a website or in a report. We argue for greater modesty in our efforts and a focus on identifying only the potentially poorest or best homes. In the end, however, it is important to remember that information from any performance measurement website or report is no substitute for multiple visits to a home at different times of the day to personally assess quality.

An Examination of Performance-Based Teacher Evaluation Systems in Five States. Summary. Issues & Answers. REL 2012-No. 129

ERIC Educational Resources Information Center

Shakman, Karen; Riordan, Julie; Sanchez, Maria Teresa; Cook, Kyle DeMeo; Fournier, Richard; Brett, Jessica

2012-01-01

This study reports on performance-based teacher evaluation systems in five states that have implemented such systems. It investigates two primary research questions: (1) What are the key characteristics of state-level performance-based teacher evaluation systems in the study states?; and (2) How do state teacher evaluation measures, the teaching…
An examination of the relationships between physicians' clinical and hospital-utilization performance.

PubMed Central

Saywell, R M; Bean, J A; Ludke, R L; Redman, R W; McHugh, G J

1981-01-01

To examine the relationships between measures of attending physician teams' clinical and utilization performance, inpatient hospital audits were conducted in 22 Maryland and western Pennsylvania nonfederal short-term hospitals. A total of 6,980 medical records were abstracted from eight diagnostic categories using the Payne and JCAH PEP medical audit procedures. The results indicate weak statistical associations between the two medical care evaluation audits; between clinical performance and utilization performance, as measured by appropriateness of admissions and length of stay; and between three utilization measures. Based on these findings, it does not appear valid to use performance in one area to evaluate performance in the other in order to measure or evaluate and ultimately improve physicians; clinical or utilization performance. PMID:6946048
Evaluating Performance Measurement Systems in Nonprofit Agencies: The Program Accountability Quality Scale (PAQS).

ERIC Educational Resources Information Center

Poole, Dennis L.; Nelson, Joan; Carnahan, Sharon; Chepenik, Nancy G.; Tubiak, Christine

2000-01-01

Developed and field tested the Performance Accountability Quality Scale (PAQS) on 191 program performance measurement systems developed by nonprofit agencies in central Florida. Preliminary findings indicate that the PAQS provides a structure for obtaining expert opinions based on a theory-driven model about the quality of proposed measurement…
The Relationship between Emotional Intelligence and Student Teacher Performance

ERIC Educational Resources Information Center

Drew, Todd L.

2006-01-01

The purpose of this mixed methods study (N = 40) was to determine whether Student Teacher Performance (STP), as measured by a behavior-based performance evaluation process, is associated with Emotional Intelligence (EI), as measured by a personality assessment instrument. The study is an important contribution to the literature in that it appears…
Interferometer-Based Calorimetric Measurements of Absorbed Dose to Water in External Beam Radiotherapy

NASA Astrophysics Data System (ADS)

Flores-Martinez, Everardo

Calorimetry is often used to establish high-energy photon absorbed dose to water (ADW) primary standards as calorimetry is a direct measurement of the energy imparted to the water by ionizing radiation. Current calorimeters use thermistors to establish national standards but there is the possibility of systematic errors in these instruments because thermistors overheat due to their low heat capacity. For this reason, there has been renewed interest in using alternative temperature measurement techniques, especially those that do not require a mechanical probe. Interferometer-based thermometry is a technique that exploits the temperature dependence of the refractive index of water and can be used as an alternative method for temperature measurement in radiation calorimetry. A distinctive advantage of the use of interferometry for radiation calorimetry is the capability of obtaining 2D or 3D temperature/dose distributions. Compared to thermistor-based measurements, the use of interferometer-based ADW measurements has been limited by the low measurement resolution. Optimized setups with higher accuracy and precision are necessary to perform measurements at clinically relevant dose rates. A calorimeter for thermistor-based ADW measurements was developed. The instrument was used to measure thermal drifts and noise were measured using the instrument in a water phantom. Residual thermal drifts were accounted for by using a three-step measurement protocol. Additionally, the instrument was used to measure ADW from a 6MV photon beam from a medical linear accelerator. A Michelson-type interferometer was built, characterized, and placed inside the calorimeter with the water phantom at the reference arm. Interferometer and phantom temperature fluctuations were minimized by means of the passive thermal control provide by the calorimeter enclosure, leading to increased fringe pattern stability. The interferometer characterization included phase shift measurements induced by displacing a piezoelectric transducer. Measurements were compared with calculations to estimate the accuracy of the technique. The interferometer-based system was used to measure ADW in a water-filled glass phantom, irradiated with a 6MV photon beam. The estimated Type-A, (k = 1) uncertainty in the associated doses was about 0.3Gy, which is an order of magnitude lower than previously published interferometer-based ADW measurements. Additionally a comparative analysis was performed with the thermistor-based measurements, results for both techniques agreed within the uncertainty. This work presents the first absolute ADW measurements performed using interferometry in the dose range of linac-based radiotherapy and represents a significant step towards standards-level measurements using this technique.
Measuring activities and participation in persons with haemophilia: A systematic review of commonly used instruments.

PubMed

Timmer, M A; Gouw, S C; Feldman, B M; Zwagemaker, A; de Kleijn, P; Pisters, M F; Schutgens, R E G; Blanchette, V; Srivastava, A; David, J A; Fischer, K; van der Net, J

2018-03-01

Monitoring clinical outcome in persons with haemophilia (PWH) is essential in order to provide optimal treatment for individual patients and compare effectiveness of treatment strategies. Experience with measurement of activities and participation in haemophilia is limited and consensus on preferred tools is lacking. The aim of this study was to give a comprehensive overview of the measurement properties of a selection of commonly used tools developed to assess activities and participation in PWH. Electronic databases were searched for articles that reported on reliability, validity or responsiveness of predetermined measurement tools (5 self-reported and 4 performance based measurement tools). Methodological quality of the studies was assessed according to the COSMIN checklist. Best evidence synthesis was used to summarize evidence on the measurement properties. The search resulted in 3453 unique hits. Forty-two articles were included. The self-reported Haemophilia Acitivity List (HAL), Pediatric HAL (PedHAL) and the performance based Functional Independence Score in Haemophilia (FISH) were studied most extensively. Methodological quality of the studies was limited. Measurement error, cross-cultural validity and responsiveness have been insufficiently evaluated. Albeit based on limited evidence, the measurement properties of the PedHAL, HAL and FISH are currently considered most satisfactory. Further research needs to focus on measurement error, responsiveness, interpretability and cross-cultural validity of the self-reported tools and validity of performance based tools which are able to assess limitations in sports and leisure activities. © 2018 The Authors. Haemophilia Published by John Wiley & Sons Ltd.
Improving Classification of Protein Interaction Articles Using Context Similarity-Based Feature Selection.

PubMed

Chen, Yifei; Sun, Yuxing; Han, Bing-Qing

2015-01-01

Protein interaction article classification is a text classification task in the biological domain to determine which articles describe protein-protein interactions. Since the feature space in text classification is high-dimensional, feature selection is widely used for reducing the dimensionality of features to speed up computation without sacrificing classification performance. Many existing feature selection methods are based on the statistical measure of document frequency and term frequency. One potential drawback of these methods is that they treat features separately. Hence, first we design a similarity measure between the context information to take word cooccurrences and phrase chunks around the features into account. Then we introduce the similarity of context information to the importance measure of the features to substitute the document and term frequency. Hence we propose new context similarity-based feature selection methods. Their performance is evaluated on two protein interaction article collections and compared against the frequency-based methods. The experimental results reveal that the context similarity-based methods perform better in terms of the F1 measure and the dimension reduction rate. Benefiting from the context information surrounding the features, the proposed methods can select distinctive features effectively for protein interaction article classification.
A near-optimal low complexity sensor fusion technique for accurate indoor localization based on ultrasound time of arrival measurements from low-quality sensors

NASA Astrophysics Data System (ADS)

Mitilineos, Stelios A.; Argyreas, Nick D.; Thomopoulos, Stelios C. A.

2009-05-01

A fusion-based localization technique for location-based services in indoor environments is introduced herein, based on ultrasound time-of-arrival measurements from multiple off-the-shelf range estimating sensors which are used in a market-available localization system. In-situ field measurements results indicated that the respective off-the-shelf system was unable to estimate position in most of the cases, while the underlying sensors are of low-quality and yield highly inaccurate range and position estimates. An extensive analysis is performed and a model of the sensor-performance characteristics is established. A low-complexity but accurate sensor fusion and localization technique is then developed, which consists inof evaluating multiple sensor measurements and selecting the one that is considered most-accurate based on the underlying sensor model. Optimality, in the sense of a genie selecting the optimum sensor, is subsequently evaluated and compared to the proposed technique. The experimental results indicate that the proposed fusion method exhibits near-optimal performance and, albeit being theoretically suboptimal, it largely overcomes most flaws of the underlying single-sensor system resulting in a localization system of increased accuracy, robustness and availability.
Evaluating the effect of online data compression on the disk cache of a mass storage system

NASA Technical Reports Server (NTRS)

Pentakalos, Odysseas I.; Yesha, Yelena

1994-01-01

A trace driven simulation of the disk cache of a mass storage system was used to evaluate the effect of an online compression algorithm on various performance measures. Traces from the system at NASA's Center for Computational Sciences were used to run the simulation and disk cache hit ratios, number of files and bytes migrating to tertiary storage were measured. The measurements were performed for both an LRU and a size based migration algorithm. In addition to seeing the effect of online data compression on the disk cache performance measure, the simulation provided insight into the characteristics of the interactive references, suggesting that hint based prefetching algorithms are the only alternative for any future improvements to the disk cache hit ratio.
How Readability and Topic Incidence Relate to Performance on Mathematics Story Problems in Computer-Based Curricula

ERIC Educational Resources Information Center

Walkington, Candace; Clinton, Virginia; Ritter, Steven N.; Nathan, Mitchell J.

2015-01-01

Solving mathematics story problems requires text comprehension skills. However, previous studies have found few connections between traditional measures of text readability and performance on story problems. We hypothesized that recently developed measures of readability and topic incidence measured by text-mining tools may illuminate associations…
76 FR 33565 - Medicare Program; Availability of Medicare Data for Performance Measurement

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-08

... data from two or more other sources. For example, a qualified entity would need to have claims data... help further alleviate some of the methodological issues associated with performance measurement based... Medicare parts A, B, and D claims data available to the qualified entity. For example, several measures in...
Classroom Composition and Measured Teacher Performance: What Do Teacher Observation Scores Really Measure?

ERIC Educational Resources Information Center

Steinberg, Matthew P.; Garrett, Rachel

2016-01-01

As states and districts implement more rigorous teacher evaluation systems, measures of teacher performance are increasingly being used to support instruction and inform retention decisions. Classroom observations take a central role in these systems, accounting for the majority of teacher ratings upon which accountability decisions are based.…
Morphological observation and analysis using automated image cytometry for the comparison of trypan blue and fluorescence-based viability detection method.

PubMed

Chan, Leo Li-Ying; Kuksin, Dmitry; Laverty, Daniel J; Saldi, Stephanie; Qiu, Jean

2015-05-01

The ability to accurately determine cell viability is essential to performing a well-controlled biological experiment. Typical experiments range from standard cell culturing to advanced cell-based assays that may require cell viability measurement for downstream experiments. The traditional cell viability measurement method has been the trypan blue (TB) exclusion assay. However, since the introduction of fluorescence-based dyes for cell viability measurement using flow or image-based cytometry systems, there have been numerous publications comparing the two detection methods. Although previous studies have shown discrepancies between TB exclusion and fluorescence-based viability measurements, image-based morphological analysis was not performed in order to examine the viability discrepancies. In this work, we compared TB exclusion and fluorescence-based viability detection methods using image cytometry to observe morphological changes due to the effect of TB on dead cells. Imaging results showed that as the viability of a naturally-dying Jurkat cell sample decreased below 70 %, many TB-stained cells began to exhibit non-uniform morphological characteristics. Dead cells with these characteristics may be difficult to count under light microscopy, thus generating an artificially higher viability measurement compared to fluorescence-based method. These morphological observations can potentially explain the differences in viability measurement between the two methods.
45 CFR 305.42 - Penalty phase-in.

Code of Federal Regulations, 2010 CFR

2010-10-01

... PROGRAM PERFORMANCE MEASURES, STANDARDS, FINANCIAL INCENTIVES, AND PENALTIES § 305.42 Penalty phase-in. States are subject to the performance penalties described in § 305.40 based on data reported for FY 2001. Data reported for FY 2000 will be used as a base year to determine improvements in performance during...
Formative Feedback through Summative Tutorial-Based Assessments: The Relationship to Student Performance

ERIC Educational Resources Information Center

Perera, Luckmika; Nguyen, Hoa; Watty, Kim

2014-01-01

This paper investigates the effectiveness (measured using assignment and examination performance) of an assessment design incorporating formative feedback through summative tutorial-based assessments to improve student performance, in a second-year Finance course at an Australian university. Data was collected for students who were enrolled in an…
Are Improvements in Measured Performance Driven by Better Treatment or "Denominator Management"?

PubMed

Harris, Alex H S; Chen, Cheng; Rubinsky, Anna D; Hoggatt, Katherine J; Neuman, Matthew; Vanneman, Megan E

2016-04-01

Process measures of healthcare quality are usually formulated as the number of patients who receive evidence-based treatment (numerator) divided by the number of patients in the target population (denominator). When the systems being evaluated can influence which patients are included in the denominator, it is reasonable to wonder if improvements in measured quality are driven by expanding numerators or contracting denominators. In 2003, the US Department of Veteran Affairs (VA) based executive compensation in part on performance on a substance use disorder (SUD) continuity-of-care quality measure. The first goal of this study was to evaluate if implementing the measure in this way resulted in expected improvements in measured performance. The second goal was to examine if the proportion of patients with SUD who qualified for the denominator contracted after the quality measure was implemented, and to describe the facility-level variation in and correlates of denominator contraction or expansion. Using 40 quarters of data straddling the implementation of the performance measure, an interrupted time series design was used to evaluate changes in two outcomes. All veterans with an SUD diagnosis in all VA facilities from fiscal year 2000 to 2009. The two outcomes were 1) measured performance-patients retained/patients qualified and 2) denominator prevalence-patients qualified/patients with SUD program contact. Measured performance improved over time (P < 0.001). Notably, the proportion of patients with SUD program contact who qualified for the denominator decreased more rapidly after the measure was implemented (p = 0.02). Facilities with higher pre-implementation denominator prevalence had steeper declines in denominator prevalence after implementation (p < 0.001). These results should motivate the development of measures that are less vulnerable to denominator management, and also the exploration of "shadow measures" to monitor and reduce undesirable denominator management.
Effect of time span and task load on pilot mental workload

NASA Technical Reports Server (NTRS)

Berg, S. L.; Sheridan, T. B.

1986-01-01

Two sets of simulations designed to examine how a pilot's mental workload is affected by continuous manual-control activity versus discrete mental tasks that included the length of time between receiving an assignment and executing it are described. The first experiment evaluated two types of measures: objective performance indicators and subjective ratings. Subjective ratings for the two missions were different, but the objective performance measures were similar. In the second experiments, workload levels were increased and a second performance measure was taken. Mental workload had no influence on either performance-based workload measure. Subjective ratings discriminated among the scenarios and correlated with performance measures for high-workload flights. The number of mental tasks performed did not influence error rates, although high manual workloads did increase errors.
Development and implementation of an automated quantitative film digitizer quality control program

NASA Astrophysics Data System (ADS)

Fetterly, Kenneth A.; Avula, Ramesh T. V.; Hangiandreou, Nicholas J.

1999-05-01

A semi-automated, quantitative film digitizer quality control program that is based on the computer analysis of the image data from a single digitized test film was developed. This program includes measurements of the geometric accuracy, optical density performance, signal to noise ratio, and presampled modulation transfer function. The variability of the measurements was less than plus or minus 5%. Measurements were made on a group of two clinical and two laboratory laser film digitizers during a trial period of approximately four months. Quality control limits were established based on clinical necessity, vendor specifications and digitizer performance. During the trial period, one of the digitizers failed the performance requirements and was corrected by calibration.
Machine characterization based on an abstract high-level language machine

NASA Technical Reports Server (NTRS)

Saavedra-Barrera, Rafael H.; Smith, Alan Jay; Miya, Eugene

1989-01-01

Measurements are presented for a large number of machines ranging from small workstations to supercomputers. The authors combine these measurements into groups of parameters which relate to specific aspects of the machine implementation, and use these groups to provide overall machine characterizations. The authors also define the concept of pershapes, which represent the level of performance of a machine for different types of computation. A metric based on pershapes is introduced that provides a quantitative way of measuring how similar two machines are in terms of their performance distributions. The metric is related to the extent to which pairs of machines have varying relative performance levels depending on which benchmark is used.
A Research on Performance Measurement Based on Economic Valued-Added Comprehensive Scorecard

NASA Astrophysics Data System (ADS)

Chen, Qin; Zhang, Xiaomei

With the development of economic, the traditional performance mainly rely on financial indicators could not satisfy the need of work. In order to make the performance measurement taking the best services for business goals, this paper proposed Economic Valued-Added Comprehensive Scorecard based on research of shortages and advantages of EVA and BSC .We used Analytic Hierarchy Process to build matrix to solve the weighting of EVA Comprehensive Scorecard. At last we could find the most influence factors for enterprise value forming the weighting.

Evaluating hydrological model performance using information theory-based metrics

USDA-ARS?s Scientific Manuscript database

The accuracy-based model performance metrics not necessarily reflect the qualitative correspondence between simulated and measured streamflow time series. The objective of this work was to use the information theory-based metrics to see whether they can be used as complementary tool for hydrologic m...
Improved Clinical Performance and Teamwork of Pediatric Interprofessional Resuscitation Teams With a Simulation-Based Educational Intervention.

PubMed

Gilfoyle, Elaine; Koot, Deanna A; Annear, John C; Bhanji, Farhan; Cheng, Adam; Duff, Jonathan P; Grant, Vincent J; St George-Hyslop, Cecilia E; Delaloye, Nicole J; Kotsakis, Afrothite; McCoy, Carolyn D; Ramsay, Christa E; Weiss, Matthew J; Gottesman, Ronald D

2017-02-01

To measure the effect of a 1-day team training course for pediatric interprofessional resuscitation team members on adherence to Pediatric Advanced Life Support guidelines, team efficiency, and teamwork in a simulated clinical environment. Multicenter prospective interventional study. Four tertiary-care children's hospitals in Canada from June 2011 to January 2015. Interprofessional pediatric resuscitation teams including resident physicians, ICU nurse practitioners, registered nurses, and registered respiratory therapists (n = 300; 51 teams). A 1-day simulation-based team training course was delivered, involving an interactive lecture, group discussions, and four simulated resuscitation scenarios, each followed by a debriefing. The first scenario of the day (PRE) was conducted prior to any team training. The final scenario of the day (POST) was the same scenario, with a slightly modified patient history. All scenarios included standardized distractors designed to elicit and challenge specific teamwork behaviors. Primary outcome measure was change (before and after training) in adherence to Pediatric Advanced Life Support guidelines, as measured by the Clinical Performance Tool. Secondary outcome measures were as follows: 1) change in times to initiation of chest compressions and defibrillation and 2) teamwork performance, as measured by the Clinical Teamwork Scale. Correlation between Clinical Performance Tool and Clinical Teamwork Scale scores was also analyzed. Teams significantly improved Clinical Performance Tool scores (67.3-79.6%; p < 0.0001), time to initiation of chest compressions (60.8-27.1 s; p < 0.0001), time to defibrillation (164.8-122.0 s; p < 0.0001), and Clinical Teamwork Scale scores (56.0-71.8%; p < 0.0001). A positive correlation was found between Clinical Performance Tool and Clinical Teamwork Scale (R = 0.281; p < 0.0001). Participation in a simulation-based team training educational intervention significantly improved surrogate measures of clinical performance, time to initiation of key clinical tasks, and teamwork during simulated pediatric resuscitation. A positive correlation between clinical and teamwork performance suggests that effective teamwork improves clinical performance of resuscitation teams.
Measuring Recognition Performance Using Computer-Based and Paper-Based Methods.

ERIC Educational Resources Information Center

Federico, Pat-Anthony

1991-01-01

Using a within-subjects design, computer-based and paper-based tests of aircraft silhouette recognition were administered to 83 male naval pilots and flight officers to determine the relative reliabilities and validities of 2 measurement modes. Relative reliabilities and validities of the two modes were contingent on the multivariate measurement…
Performance of International Classification of Diseases-based injury severity measures used to predict in-hospital mortality: A systematic review and meta-analysis.

PubMed

Gagné, Mathieu; Moore, Lynne; Beaudoin, Claudia; Batomen Kuimi, Brice Lionel; Sirois, Marie-Josée

2016-03-01

The International Classification of Diseases (ICD) is the main classification system used for population-based injury surveillance activities but does not contain information on injury severity. ICD-based injury severity measures can be empirically derived or mapped, but no single approach has been formally recommended. This study aimed to compare the performance of ICD-based injury severity measures to predict in-hospital mortality among injury-related admissions. A systematic review and a meta-analysis were conducted. MEDLINE, EMBASE, and Global Health databases were searched from their inception through September 2014. Observational studies that assessed the performance of ICD-based injury severity measures to predict in-hospital mortality and reported discriminative ability using the area under a receiver operating characteristic curve (AUC) were included. Metrics of model performance were extracted. Pooled AUC were estimated under random-effects models. Twenty-two eligible studies reported 72 assessments of discrimination on ICD-based injury severity measures. Reported AUC ranged from 0.681 to 0.958. Of the 72 assessments, 46 showed excellent (0.80 ≤ AUC < 0.90) and 6 outstanding (AUC ≥ 0.90) discriminative ability. Pooled AUC for ICD-based Injury Severity Score (ICISS) based on the product of traditional survival proportions was significantly higher than measures based on ICD mapped to Abbreviated Injury Scale (AIS) scores (0.863 vs. 0.825 for ICDMAP-ISS [p = 0.005] and ICDMAP-NISS [p = 0.016]). Similar results were observed when studies were stratified by the type of data used (trauma registry or hospital discharge) or the provenance of survival proportions (internally or externally derived). However, among studies published after 2003 the Trauma Mortality Prediction Model based on ICD-9 codes (TMPM-9) demonstrated superior discriminative ability than ICISS using the product of traditional survival proportions (0.850 vs. 0.802, p = 0.002). Models generally showed poor calibration. ICISS using the product of traditional survival proportions and TMPM-9 predict mortality more accurately than those mapped to AIS codes and should be preferred for describing injury severity when ICD is used to record injury diagnoses. Systematic review and meta-analysis, level III.
Measuring Value Added in Higher Education: A Proposed Methodology for Developing a Performance Indicator Based on the Economic Value Added to Graduates

ERIC Educational Resources Information Center

Rodgers, Timothy

2007-01-01

The 2003 UK higher education White Paper suggested that the sector needed to re-examine the potential of the value added concept. This paper describes a possible methodology for developing a performance indicator based on the economic value added to graduates. The paper examines how an entry-quality-adjusted measure of a graduate's…
Characterization of in-flight performance of ion propulsion systems

NASA Astrophysics Data System (ADS)

Sovey, James S.; Rawlin, Vincent K.

1993-06-01

In-flight measurements of ion propulsion performance, ground test calibrations, and diagnostic performance measurements were reviewed. It was found that accelerometers provided the most accurate in-flight thrust measurements compared with four other methods that were surveyed. An experiment has also demonstrated that pre-flight alignment of the thrust vector was sufficiently accurate so that gimbal adjustments and use of attitude control thrusters were not required to counter disturbance torques caused by thrust vector misalignment. The effects of facility background pressure, facility enhanced charge-exchange reactions, and contamination on ground-based performance measurements are also discussed. Vacuum facility pressures for inert-gas ion thruster life tests and flight qualification tests will have to be less than 2 mPa to ensure accurate performance measurements.
Characterization of in-flight performance of ion propulsion systems

NASA Technical Reports Server (NTRS)

Sovey, James S.; Rawlin, Vincent K.

1993-01-01

In-flight measurements of ion propulsion performance, ground test calibrations, and diagnostic performance measurements were reviewed. It was found that accelerometers provided the most accurate in-flight thrust measurements compared with four other methods that were surveyed. An experiment has also demonstrated that pre-flight alignment of the thrust vector was sufficiently accurate so that gimbal adjustments and use of attitude control thrusters were not required to counter disturbance torques caused by thrust vector misalignment. The effects of facility background pressure, facility enhanced charge-exchange reactions, and contamination on ground-based performance measurements are also discussed. Vacuum facility pressures for inert-gas ion thruster life tests and flight qualification tests will have to be less than 2 mPa to ensure accurate performance measurements.
Performance Indicators in Spine Surgery.

PubMed

St-Pierre, Godefroy Hardy; Yang, Michael H; Bourget-Murray, Jonathan; Thomas, Ken C; Hurlbert, Robin John; Matthes, Nikolas

2018-02-15

Systematic review. To elucidate how performance indicators are currently used in spine surgery. The Patient Protection and Affordable Care Act has given significant traction to the idea that healthcare must provide value to the patient through the introduction of hospital value-based purchasing. The key to implementing this new paradigm is to measure this value notably through performance indicators. MEDLINE, CINAHL Plus, EMBASE, and Google Scholar were searched for studies reporting the use of performance indicators specific to spine surgery. We followed the Prisma-P methodology for a systematic review for entries from January 1980 to July 2016. All full text articles were then reviewed to identify any measure of performance published within the article. This measure was then examined as per the three criteria of established standard, exclusion/risk adjustment, and benchmarking to determine if it constituted a performance indicator. The initial search yielded 85 results among which two relevant studies were identified. The extended search gave a total of 865 citations across databases among which 15 new articles were identified. The grey literature search provided five additional reports which in turn led to six additional articles. A total of 27 full text articles and reports were retrieved and reviewed. We were unable to identify performance indicators. The articles presenting a measure of performance were organized based on how many criteria they lacked. We further examined the next steps to be taken to craft the first performance indicator in spine surgery. The science of performance measurement applied to spine surgery is still in its infancy. Current outcome metrics used in clinical settings require refinement to become performance indicators. Current registry work is providing the necessary foundation, but requires benchmarking to truly measure performance. 1.
Quality Measures for Dialysis: Time for a Balanced Scorecard.

PubMed

Kliger, Alan S

2016-02-05

Recent federal legislation establishes a merit-based incentive payment system for physicians, with a scorecard for each professional. The Centers for Medicare and Medicaid Services evaluate quality of care with clinical performance measures and have used these metrics for public reporting and payment to dialysis facilities. Similar metrics may be used for the future merit-based incentive payment system. In nephrology, most clinical performance measures measure processes and intermediate outcomes of care. These metrics were developed from population studies of best practice and do not identify opportunities for individualizing care on the basis of patient characteristics and individual goals of treatment. The In-Center Hemodialysis (ICH) Consumer Assessment of Healthcare Providers and Systems (CAHPS) survey examines patients' perception of care and has entered the arena to evaluate quality of care. A balanced scorecard of quality performance should include three elements: population-based best clinical practice, patient perceptions, and individually crafted patient goals of care. Copyright © 2016 by the American Society of Nephrology.
Strain measurement based battery testing

DOEpatents

Xu, Jeff Qiang; Steiber, Joe; Wall, Craig M.; Smith, Robert; Ng, Cheuk

2017-05-23

A method and system for strain-based estimation of the state of health of a battery, from an initial state to an aged state, is provided. A strain gauge is applied to the battery. A first strain measurement is performed on the battery, using the strain gauge, at a selected charge capacity of the battery and at the initial state of the battery. A second strain measurement is performed on the battery, using the strain gauge, at the selected charge capacity of the battery and at the aged state of the battery. The capacity degradation of the battery is estimated as the difference between the first and second strain measurements divided by the first strain measurement.
Spectral emissivity and transmissivity measurement for zinc sulphide infrared window based on integrating-sphere reflectometry

NASA Astrophysics Data System (ADS)

Zhang, Yu-Feng; Dai, Jing-Min; Zhang, Lei; Pan, Wei-Dong

2013-08-01

The spectral emissivity and transmissivity of zinc sulphide (ZnS) infrared windows in the spectral region from 2 to 12 μm and temperature range from 20 to 700°C is measured by a facility built at the Harbin Institute of Technology (HIT). The facility is based on the integrating-sphere reflectometry. Measurements have been performed on two samples made of ZnS. The results measured at 20°C are in good agreement with those obtained by the method of radiant energy comparison using a Fourier transform infrared spectrometer. Emissivity measurements performed with this facility present an uncertainty of 5.5% (cover factor=2).
Performance Modeling of an Airborne Raman Water Vapor Lidar

NASA Technical Reports Server (NTRS)

Whiteman, D. N.; Schwemmer, G.; Berkoff, T.; Plotkin, H.; Ramos-Izquierdo, L.; Pappalardo, G.

2000-01-01

A sophisticated Raman lidar numerical model had been developed. The model has been used to simulate the performance of two ground-based Raman water vapor lidar systems. After tuning the model using these ground-based measurements, the model is used to simulate the water vapor measurement capability of an airborne Raman lidar under both day-and night-time conditions for a wide range of water vapor conditions. The results indicate that, under many circumstances, the daytime measurements possess comparable resolution to an existing airborne differential absorption water vapor lidar while the nighttime measurement have higher resolution. In addition, a Raman lidar is capable of measurements not possible using a differential absorption system.
Drone based measurement system for radiofrequency exposure assessment.

PubMed

Joseph, Wout; Aerts, Sam; Vandenbossche, Matthias; Thielens, Arno; Martens, Luc

2016-03-10

For the first time, a method to assess radiofrequency (RF) electromagnetic field (EMF) exposure of the general public in real environments with a true free-space antenna system is presented. Using lightweight electronics and multiple antennas placed on a drone, it is possible to perform exposure measurements. This technique will enable researchers to measure three-dimensional RF-EMF exposure patterns accurately in the future and at locations currently difficult to access. A measurement procedure and appropriate measurement settings have been developed. As an application, outdoor measurements are performed as a function of height up to 60 m for Global System for Mobile Communications (GSM) 900 MHz base station exposure. Bioelectromagnetics. © 2016 Wiley Periodicals, Inc. © 2016 Wiley Periodicals, Inc.
A novel comparison of Møller and Compton electron-beam polarimeters

DOE PAGES

Magee, J. A.; Narayan, A.; Jones, D.; ...

2017-01-19

We have performed a novel comparison between electron-beam polarimeters based on Moller and Compton scattering. A sequence of electron-beam polarization measurements were performed at low beam currents (more » $<$ 5 $$\\mu$$A) during the $$Q_{\\rm weak}$$ experiment in Hall C at Jefferson Lab. These low current measurements were bracketed by the regular high current (180 $$\\mu$$A) operation of the Compton polarimeter. All measurements were found to be consistent within experimental uncertainties of 1% or less, demonstrating that electron polarization does not depend significantly on the beam current. This result lends confidence to the common practice of applying Moller measurements made at low beam currents to physics experiments performed at higher beam currents. Here, the agreement between two polarimetry techniques based on independent physical processes sets an important benchmark for future precision asymmetry measurements that require sub-1% precision in polarimetry.« less
A novel comparison of Møller and Compton electron-beam polarimeters

DOE Office of Scientific and Technical Information (OSTI.GOV)

Magee, J. A.; Narayan, A.; Jones, D.

We have performed a novel comparison between electron-beam polarimeters based on Moller and Compton scattering. A sequence of electron-beam polarization measurements were performed at low beam currents (more » $<$ 5 $$\\mu$$A) during the $$Q_{\\rm weak}$$ experiment in Hall C at Jefferson Lab. These low current measurements were bracketed by the regular high current (180 $$\\mu$$A) operation of the Compton polarimeter. All measurements were found to be consistent within experimental uncertainties of 1% or less, demonstrating that electron polarization does not depend significantly on the beam current. This result lends confidence to the common practice of applying Moller measurements made at low beam currents to physics experiments performed at higher beam currents. Here, the agreement between two polarimetry techniques based on independent physical processes sets an important benchmark for future precision asymmetry measurements that require sub-1% precision in polarimetry.« less
PERFORMANCE OF A COMPUTER-BASED ASSESSMENT OF COGNITIVE FUNCTION MEASURES IN TWO COHORTS OF SENIORS

PubMed Central

Espeland, Mark A.; Katula, Jeffrey A.; Rushing, Julia; Kramer, Arthur F.; Jennings, Janine M.; Sink, Kaycee M.; Nadkarni, Neelesh K.; Reid, Kieran F.; Castro, Cynthia M.; Church, Timothy; Kerwin, Diana R.; Williamson, Jeff D.; Marottoli, Richard A.; Rushing, Scott; Marsiske, Michael; Rapp, Stephen R.

2013-01-01

Background Computer-administered assessment of cognitive function is being increasingly incorporated in clinical trials, however its performance in these settings has not been systematically evaluated. Design The Seniors Health and Activity Research Program (SHARP) pilot trial (N=73) developed a computer-based tool for assessing memory performance and executive functioning. The Lifestyle Interventions and Independence for Seniors (LIFE) investigators incorporated this battery in a full scale multicenter clinical trial (N=1635). We describe relationships that test scores have with those from interviewer-administered cognitive function tests and risk factors for cognitive deficits and describe performance measures (completeness, intra-class correlations). Results Computer-based assessments of cognitive function had consistent relationships across the pilot and full scale trial cohorts with interviewer-administered assessments of cognitive function, age, and a measure of physical function. In the LIFE cohort, their external validity was further demonstrated by associations with other risk factors for cognitive dysfunction: education, hypertension, diabetes, and physical function. Acceptable levels of data completeness (>83%) were achieved on all computer-based measures, however rates of missing data were higher among older participants (odds ratio=1.06 for each additional year; p<0.001) and those who reported no current computer use (odds ratio=2.71; p<0.001). Intra-class correlations among clinics were at least as low (ICC≤0.013) as for interviewer measures (ICC≤0.023), reflecting good standardization. All cognitive measures loaded onto the first principal component (global cognitive function), which accounted for 40% of the overall variance. Conclusion Our results support the use of computer-based tools for assessing cognitive function in multicenter clinical trials of older individuals. PMID:23589390
Regression-Based Estimates of Observed Functional Status in Centenarians

PubMed Central

Mitchell, Meghan B.; Miller, L. Stephen; Woodard, John L.; Davey, Adam; Martin, Peter; Burgess, Molly; Poon, Leonard W.

2011-01-01

Purpose of the Study: There is lack of consensus on the best method of functional assessment, and there is a paucity of studies on daily functioning in centenarians. We sought to compare associations between performance-based, self-report, and proxy report of functional status in centenarians. We expected the strongest relationships between proxy reports and observed performance of basic activities of daily living (BADLs) and instrumental activities of daily living (IADLs). We hypothesized that the discrepancy between self-report and observed daily functioning would be modified by cognitive status. We additionally sought to provide clinicians with estimates of centenarians’ observed daily functioning based on their mental status in combination with subjective measures of activities of daily living (ADLs). Design and Methods: Two hundred and forty-four centenarians from the Georgia Centenarian Study were included in this cross-sectional population-based study. Measures included the Direct Assessment of Functional Status, self-report and proxy report of functional status, and the Mini-Mental State Examination (MMSE). Results: Associations between observed and proxy reports were stronger than between observed and self-report across BADL and IADL measures. A significant MMSE by type of report interaction was found, indicating that lower MMSE performance is associated with a greater discrepancy between subjective and objective ADL measures. Implications: Results demonstrate associations between 3 methods of assessing functional status and suggest proxy reports are generally more accurate than self-report measures. Cognitive status accounted for some of the discrepancy between observed and self-reports, and we provide clinicians with tables to estimate centenarians’ performance on observed functional measures based on MMSE and subjective report of functional status. PMID:20974657
Using satellite observations in performance evaluation for regulatory air quality modeling: Comparison with ground-level measurements

NASA Astrophysics Data System (ADS)

Odman, M. T.; Hu, Y.; Russell, A.; Chai, T.; Lee, P.; Shankar, U.; Boylan, J.

2012-12-01

Regulatory air quality modeling, such as State Implementation Plan (SIP) modeling, requires that model performance meets recommended criteria in the base-year simulations using period-specific, estimated emissions. The goal of the performance evaluation is to assure that the base-year modeling accurately captures the observed chemical reality of the lower troposphere. Any significant deficiencies found in the performance evaluation must be corrected before any base-case (with typical emissions) and future-year modeling is conducted. Corrections are usually made to model inputs such as emission-rate estimates or meteorology and/or to the air quality model itself, in modules that describe specific processes. Use of ground-level measurements that follow approved protocols is recommended for evaluating model performance. However, ground-level monitoring networks are spatially sparse, especially for particulate matter. Satellite retrievals of atmospheric chemical properties such as aerosol optical depth (AOD) provide spatial coverage that can compensate for the sparseness of ground-level measurements. Satellite retrievals can also help diagnose potential model or data problems in the upper troposphere. It is possible to achieve good model performance near the ground, but have, for example, erroneous sources or sinks in the upper troposphere that may result in misleading and unrealistic responses to emission reductions. Despite these advantages, satellite retrievals are rarely used in model performance evaluation, especially for regulatory modeling purposes, due to the high uncertainty in retrievals associated with various contaminations, for example by clouds. In this study, 2007 was selected as the base year for SIP modeling in the southeastern U.S. Performance of the Community Multiscale Air Quality (CMAQ) model, at a 12-km horizontal resolution, for this annual simulation is evaluated using both recommended ground-level measurements and non-traditional satellite retrievals. Evaluation results are assessed against recommended criteria and peer studies in the literature. Further analysis is conducted, based upon these assessments, to discover likely errors in model inputs and potential deficiencies in the model itself. Correlations as well as differences in input errors and model deficiencies revealed by ground-level measurements versus satellite observations are discussed. Additionally, sensitivity analyses are employed to investigate errors in emission-rate estimates using either ground-level measurements or satellite retrievals, and the results are compared against each other considering observational uncertainties. Recommendations are made for how to effectively utilize satellite retrievals in regulatory air quality modeling.
Density-independent algorithm for sensing moisture content of sawdust based on reflection measurements

USDA-ARS?s Scientific Manuscript database

A density-independent algorithm for moisture content determination in sawdust, based on a one-port reflection measurement technique is proposed for the first time. Performance of this algorithm is demonstrated through measurement of the dielectric properties of sawdust with an open-ended haft-mode s...
Comparison of methodologies for calculating quality measures based on administrative data versus clinical data from an electronic health record system: implications for performance measures.

PubMed

Tang, Paul C; Ralston, Mary; Arrigotti, Michelle Fernandez; Qureshi, Lubna; Graham, Justin

2007-01-01

New reimbursement policies and pay-for-performance programs to reward providers for producing better outcomes are proliferating. Although electronic health record (EHR) systems could provide essential clinical data upon which to base quality measures, most metrics in use were derived from administrative claims data. We compared commonly used quality measures calculated from administrative data to those derived from clinical data in an EHR based on a random sample of 125 charts of Medicare patients with diabetes. Using standard definitions based on administrative data (which require two visits with an encounter diagnosis of diabetes during the measurement period), only 75% of diabetics determined by manually reviewing the EHR (the gold standard) were identified. In contrast, 97% of diabetics were identified using coded information in the EHR. The discrepancies in identified patients resulted in statistically significant differences in the quality measures for frequency of HbA1c testing, control of blood pressure, frequency of testing for urine protein, and frequency of eye exams for diabetic patients. New development of standardized quality measures should shift from claims-based measures to clinically based measures that can be derived from coded information in an EHR. Using data from EHRs will also leverage their clinical content without adding burden to the care process.

The Future of Classification in Wheelchair Sports; Can Data Science and Technological Advancement Offer an Alternative Point of View?

PubMed

van der Slikke, Rienk M A; Bregman, Daan J J; Berger, Monique A M; de Witte, Annemarie M H; Veeger, Dirk-Jan H E J

2017-11-01

Classification is a defining factor for competition in wheelchair sports, but it is a delicate and time-consuming process with often questionable validity. 1 New inertial sensor based measurement methods applied in match play and field tests, allow for more precise and objective estimates of the impairment effect on wheelchair mobility performance. It was evaluated if these measures could offer an alternative point of view for classification. Six standard wheelchair mobility performance outcomes of different classification groups were measured in match play (n=29), as well as best possible performance in a field test (n=47). In match-results a clear relationship between classification and performance level is shown, with increased performance outcomes in each adjacent higher classification group. Three outcomes differed significantly between the low and mid-class groups, and one between the mid and high-class groups. In best performance (field test), a split between the low and mid-class groups shows (5 out of 6 outcomes differed significantly) but hardly any difference between the mid and high-class groups. This observed split was confirmed by cluster analysis, revealing the existence of only two performance based clusters. The use of inertial sensor technology to get objective measures of wheelchair mobility performance, combined with a standardized field-test, brought alternative views for evidence based classification. The results of this approach provided arguments for a reduced number of classes in wheelchair basketball. Future use of inertial sensors in match play and in field testing could enhance evaluation of classification guidelines as well as individual athlete performance.
Performance evaluation of a biodiesel fuelled transportation engine retrofitted with a non-noble metal catalysed diesel oxidation catalyst for controlling unregulated emissions.

PubMed

Shukla, Pravesh Chandra; Gupta, Tarun; Agarwal, Avinash Kumar

2018-02-15

In present study, engine exhaust was sampled for measurement and analysis of unregulated emissions from a four cylinder transportation diesel engine using a state-of-the-art FTIR (Fourier transform infrared spectroscopy) emission analyzer. Test fuels used were Karanja biodiesel blend (B20) and baseline mineral diesel. Real-time emission measurements were performed for raw exhaust as well as exhaust sampled downstream of the two in-house prepared non-noble metal based diesel oxidation catalysts (DOCs) and a baseline commercial DOC based on noble metals. Two prepared non-noble metal based DOCs were based on Co-Ce mixed oxide and Lanthanum based perovskite catalysts. Perovskite based DOC performed superior compared to Co-Ce mixed oxide catalyst based DOC. Commercial noble metal based DOC was found to be the most effective in reducing unregulated hydrocarbon emissions in the engine exhaust, followed by the two in-house prepared non-noble metal based DOCs. Copyright © 2017 Elsevier B.V. All rights reserved.
Towards a balanced performance measurement system in a public health care organization.

PubMed

Yuen, Peter P; Ng, Artie W

2012-01-01

This article attempts to devise an integrated performance measurement framework to assess the Hong Kong Hospital Authority (HA) management system by harnessing previous performance measurement systems. An integrated evaluative framework based on the balanced score card (BSC) was developed and applied using the case study method and longitudinal data to evaluate the HA's performance management system. The authors unveil evolving HA performance indicators (P1). Despite the HA staffs explicit quality emphasis, cost control remains the primary focus in their performance measurements. RESEARCH LHNITATIONS/IMPLICATIONS: Data used in this study are from secondary sources, disclosed mostly by HA staff. This study shows public sector staff often attach too much importance to cost control and easily measurable activities at the expense of quality and other less easily measurable attributes'. A balanced performance measurement system, linked to health targets, with a complementary budgeting process that supports pertinent resource allocation is yet to be implemented in Hong Kong's public hospitals.
The Applicability of Standard Error of Measurement and Minimal Detectable Change to Motor Learning Research-A Behavioral Study.

PubMed

Furlan, Leonardo; Sterr, Annette

2018-01-01

Motor learning studies face the challenge of differentiating between real changes in performance and random measurement error. While the traditional p -value-based analyses of difference (e.g., t -tests, ANOVAs) provide information on the statistical significance of a reported change in performance scores, they do not inform as to the likely cause or origin of that change, that is, the contribution of both real modifications in performance and random measurement error to the reported change. One way of differentiating between real change and random measurement error is through the utilization of the statistics of standard error of measurement (SEM) and minimal detectable change (MDC). SEM is estimated from the standard deviation of a sample of scores at baseline and a test-retest reliability index of the measurement instrument or test employed. MDC, in turn, is estimated from SEM and a degree of confidence, usually 95%. The MDC value might be regarded as the minimum amount of change that needs to be observed for it to be considered a real change, or a change to which the contribution of real modifications in performance is likely to be greater than that of random measurement error. A computer-based motor task was designed to illustrate the applicability of SEM and MDC to motor learning research. Two studies were conducted with healthy participants. Study 1 assessed the test-retest reliability of the task and Study 2 consisted in a typical motor learning study, where participants practiced the task for five consecutive days. In Study 2, the data were analyzed with a traditional p -value-based analysis of difference (ANOVA) and also with SEM and MDC. The findings showed good test-retest reliability for the task and that the p -value-based analysis alone identified statistically significant improvements in performance over time even when the observed changes could in fact have been smaller than the MDC and thereby caused mostly by random measurement error, as opposed to by learning. We suggest therefore that motor learning studies could complement their p -value-based analyses of difference with statistics such as SEM and MDC in order to inform as to the likely cause or origin of any reported changes in performance.
Guidelines for improving the reproducibility of quantitative multiparameter immunofluorescence measurements by laser scanning cytometry on fixed cell suspensions from human solid tumors.

PubMed

Shackney, Stanley; Emlet, David R; Pollice, Agnese; Smith, Charles; Brown, Kathryn; Kociban, Deborah

2006-01-01

Laser scanning Cytometry (LSC) is a versatile technology that makes it possible to perform multiple measurements on individual cells and correlate them cell by cell with other cellular features. It would be highly desirable to be able to perform reproducible, quantitative, correlated cell-based immunofluorescence studies on individual cells from human solid tumors. However, such studies can be challenging because of the presence of large numbers of cell aggregates and other confounding factors. Techniques have been developed to deal with cell aggregates in data sets collected by LSC. Experience has also been gained in addressing other key technical and methodological issues that can affect the reproducibility of such cell-based immunofluorescence measurements. We describe practical aspects of cell sample collection, cell fixation and staining, protocols for performing multiparameter immunofluorescence measurements by LSC, use of controls and reference samples, and approaches to data analysis that we have found useful in improving the accuracy and reproducibility of LSC data obtained in human tumor samples. We provide examples of the potential advantages of LSC in examining quantitative aspects of cell-based analysis. Improvements in the quality of cell-based multiparameter immunofluorescence measurements make it possible to extract useful information from relatively small numbers of cells. This, in turn, permits the performance of multiple multicolor panels on each tumor sample. With links among the different panels that are provided by overlapping measurements, it is possible to develop increasingly more extensive profiles of intracellular expression of multiple proteins in clinical samples of human solid tumors. Examples of such linked panels of measurements are provided. Advances in methodology can improve cell-based multiparameter immunofluorescence measurements on cell suspensions from human solid tumors by LSC for use in prognostic and predictive clinical applications. Copyright (c) 2005 Wiley-Liss, Inc.
Shock Initiation of Wedge-shaped Explosive Measured with Smear Camera and Photon Doppler Velocimetry

NASA Astrophysics Data System (ADS)

Gu, Yan

2017-06-01

Triaminotrinitrobenzene (TATB) is an important insensitive high explosive in conventional weapons due to its safety and high energy. In order to have an insight into the shock initiation performance of a TATB-based insensitive high explosive (IHE), experimental measurements of the particle velocity histories of the TATB-based Explosive using Photon Doppler Velocimetry and shock wave profile of the TATB-based explosive using High Speed Rotating Mirror Smear Camera had been performed. In this paper, we would describe the shock initiation performance of the TATB-based explosive by run-to-detonation distance and the particle velocity history at an initialization shock of about 7.9 GPa. The parameters of hugoniot of unreacted the TATB-based explosive and Pop relationship could be derived with the particle velocity history obtained in this paper.
Measurement-based reliability/performability models

NASA Technical Reports Server (NTRS)

Hsueh, Mei-Chen

1987-01-01

Measurement-based models based on real error-data collected on a multiprocessor system are described. Model development from the raw error-data to the estimation of cumulative reward is also described. A workload/reliability model is developed based on low-level error and resource usage data collected on an IBM 3081 system during its normal operation in order to evaluate the resource usage/error/recovery process in a large mainframe system. Thus, both normal and erroneous behavior of the system are modeled. The results provide an understanding of the different types of errors and recovery processes. The measured data show that the holding times in key operational and error states are not simple exponentials and that a semi-Markov process is necessary to model the system behavior. A sensitivity analysis is performed to investigate the significance of using a semi-Markov process, as opposed to a Markov process, to model the measured system.
Activity-based prospective memory in schizophrenia.

PubMed

Kumar, Devvarta; Nizamie, S Haque; Jahan, Masroor

2008-05-01

The study reports activity-based prospective memory as well as its clinical and neuropsychological correlates in schizophrenia. A total of 42 persons diagnosed with schizophrenia and 42 healthy controls were administered prospective memory, set-shifting, and verbal working memory tasks. The schizophrenia group was additionally administered various psychopathology rating scales. Group differences, with poorer performances of the schizophrenia group, were observed on the measures of prospective memory, working memory, and set shifting. The performance on prospective memory tasks correlated with the performance levels on verbal working memory and set-shifting tasks but not with the clinical measures. This study demonstrated impaired activity-based prospective memory in schizophrenia. The impairment can be due to deficits in various neuropsychological domains.
Neurologic examination and instrument-based measurements in the evaluation of ulnar neuropathy at the elbow.

PubMed

Omejec, Gregor; Podnar, Simon

2018-06-01

The aim of the study was to compare the utility of instrument-based assessment of peripheral nerve function with the neurologic examination in ulnar neuropathy at the elbow (UNE). We prospectively recruited consecutive patients with suspected UNE, performed a neurologic examination, and performed instrument-based measurements (muscle cross-sectional area by ultrasonography, muscle strength by dynamometry, and sensation using monofilaments). We found good correlations between clinical estimates and corresponding instrument-based measurements, with similar ability to diagnose UNE and predict UNE pathophysiology. Although instrument-based methods provide quantitative evaluation of peripheral nerve function, we did not find them to be more sensitive or specific in the diagnosis of UNE than the standard neurologic examination. Likewise, instrument-based methods were not better able to differentiate between groups of UNE patients with different pathophysiologies. Muscle Nerve 57: 951-957, 2018. © 2017 Wiley Periodicals, Inc.
Application of Athletic Movement Tests that Predict Injury Risk in a Military Population: Development of Normative Data.

PubMed

Teyhen, Deydre S; Shaffer, Scott W; Butler, Robert J; Goffar, Stephen L; Kiesel, Kyle B; Rhon, Daniel I; Boyles, Robert E; McMillian, Daniel J; Williamson, Jared N; Plisky, Phillip J

2016-10-01

Performance on movement tests helps to predict injury risk in a variety of physically active populations. Understanding baseline measures for normal is an important first step. Determine differences in physical performance assessments and describe normative values for these tests based on military unit type. Assessment of power, balance, mobility, motor control, and performance on the Army Physical Fitness Test were assessed in a cohort of 1,466 soldiers. Analysis of variance was performed to compare the results based on military unit type (Rangers, Combat, Combat Service, and Combat Service Support) and analysis of covariance was performed to determine the influence of age and gender. Rangers performed the best on all performance and fitness measures (p < 0.05). Combat soldiers performed better than Combat Service and Service Support soldiers on several physical performance tests and the Army Physical Fitness Test (p < 0.05). Performance in Combat Service and Service Support soldiers was equivalent on most measures (p < 0.05). Functional performance and level of fitness varied significantly by military unit type. Understanding these differences will provide a foundation for future injury prediction and prevention strategies. Reprint & Copyright © 2016 Association of Military Surgeons of the U.S.
Preferences of Training Performance Measurement: A Comparative Study of Training Professionals and Non-Training Managers

ERIC Educational Resources Information Center

Chapman, Diane D.

2004-01-01

This survey-based study addressed a perceived gap between training performance evaluation practice and decision-making criteria required in business. Training professionals and non-training managers in North Carolina were surveyed. The study found that the groups differ in the performance measures that motivate them to act on training issues.…
Assessment without Testing: Using Performance Measures Embedded in a Technology-Based Instructional Program as Indicators of Reading Ability

ERIC Educational Resources Information Center

Mitchell, Alison; Baron, Lauren; Macaruso, Paul

2018-01-01

Screening and monitoring student reading progress can be costly and time consuming. Assessment embedded within the context of online instructional programs can capture ongoing student performance data while limiting testing time outside of instruction. This paper presents two studies that examined the validity of using performance measures from a…
Performance of bed-load transport equations relative to geomorphic significance: Predicting effective discharge and its transport rate

Treesearch

Jeffrey J. Barry; John M. Buffington; Peter Goodwin; John .G. King; William W. Emmett

2008-01-01

Previous studies assessing the accuracy of bed-load transport equations have considered equation performance statistically based on paired observations of measured and predicted bed-load transport rates. However, transport measurements were typically taken during low flows, biasing the assessment of equation performance toward low discharges, and because equation...
Fundamental performance of transverse wind estimator from Shack-Hartmann wave-front sensor measurements.

PubMed

Li, Zhenghan; Li, Xinyang

2018-04-30

Real time transverse wind estimation contributes to predictive correction which is used to compensate for the time delay error in the control systems of adaptive optics (AO) system. Many methods that apply Shack-Hartmann wave-front sensor to wind profile measurement have been proposed. One of the obvious problems is the lack of a fundamental benchmark to compare the various methods. In this work, we present the fundamental performance limits for transverse wind estimator from Shack-Hartmann wave-front sensor measurements using Cramér-Rao lower bound (CRLB). The bound provides insight into the nature of the transverse wind estimation, thereby suggesting how to design and improve the estimator in the different application scenario. We analyze the theoretical bound and find that factors such as slope measurement noise, wind velocity and atmospheric coherence length r 0 have important influence on the performance. Then, we introduced the non-iterative gradient-based transverse wind estimator. The source of the deterministic bias of the gradient-based transverse wind estimators is analyzed for the first time. Finally, we derived biased CRLB for the gradient-based transverse wind estimators from Shack-Hartmann wave-front sensor measurements and the bound can predict the performance of estimator more accurately.
Multiple performance measures are needed to evaluate triage systems in the emergency department.

PubMed

Zachariasse, Joany M; Nieboer, Daan; Oostenbrink, Rianne; Moll, Henriëtte A; Steyerberg, Ewout W

2018-02-01

Emergency department triage systems can be considered prediction rules with an ordinal outcome, where different directions of misclassification have different clinical consequences. We evaluated strategies to compare the performance of triage systems and aimed to propose a set of performance measures that should be used in future studies. We identified performance measures based on literature review and expert knowledge. Their properties are illustrated in a case study evaluating two triage modifications in a cohort of 14,485 pediatric emergency department visits. Strengths and weaknesses of the performance measures were systematically appraised. Commonly reported performance measures are measures of statistical association (34/60 studies) and diagnostic accuracy (17/60 studies). The case study illustrates that none of the performance measures fulfills all criteria for triage evaluation. Decision curves are the performance measures with the most attractive features but require dichotomization. In addition, paired diagnostic accuracy measures can be recommended for dichotomized analysis, and the triage-weighted kappa and Nagelkerke's R 2 for ordinal analyses. Other performance measures provide limited additional information. When comparing modifications of triage systems, decision curves and diagnostic accuracy measures should be used in a dichotomized analysis, and the triage-weighted kappa and Nagelkerke's R 2 in an ordinal approach. Copyright © 2017 Elsevier Inc. All rights reserved.
Linking Quality and Spending to Measure Value for People with Serious Illness.

PubMed

Ryan, Andrew M; Rodgers, Phillip E

2018-03-01

Healthcare payment is rapidly evolving to reward value by measuring and paying for quality and spending performance. Rewarding value for the care of seriously ill patients presents unique challenges. To evaluate the state of current efforts to measure and reward value for the care of seriously ill patients. We performed a PubMed search of articles related to (1) measures of spending for people with serious illness and (2) linking spending and quality measures and rewarding performance for the care of people with serious illness. We limited our search to U.S.-based studies published in English between January 1, 1960, and March 31, 2017. We supplemented this search by identifying public programs and other known initiatives that linked quality and spending for the seriously ill and extracted key program elements. Our search related to linking spending and quality measures and rewarding performance for the care of people with serious illness yielded 277 articles. We identified three current public programs that currently link measures of quality and spending-or are likely to within the next few years-the Oncology Care Model; the Comprehensive End-Stage Renal Disease Model; and Home Health Value-Based Purchasing. Models that link quality and spending consist of four core components: (1) measuring quality, (2) measuring spending, (3) the payment adjustment model, and (4) the linking/incentive model. We found that current efforts to reward value for seriously ill patients are targeted for specific patient populations, do not broadly encourage the use of palliative care, and have not closely aligned quality and spending measures related to palliative care. We develop recommendations for policymakers and stakeholders about how measures of spending and quality can be balanced in value-based payment programs.
Linking Quality and Spending to Measure Value for People with Serious Illness

PubMed Central

Rodgers, Phillip E.

2018-01-01

Abstract Background: Healthcare payment is rapidly evolving to reward value by measuring and paying for quality and spending performance. Rewarding value for the care of seriously ill patients presents unique challenges. Objective: To evaluate the state of current efforts to measure and reward value for the care of seriously ill patients. Design: We performed a PubMed search of articles related to (1) measures of spending for people with serious illness and (2) linking spending and quality measures and rewarding performance for the care of people with serious illness. We limited our search to U.S.-based studies published in English between January 1, 1960, and March 31, 2017. We supplemented this search by identifying public programs and other known initiatives that linked quality and spending for the seriously ill and extracted key program elements. Results: Our search related to linking spending and quality measures and rewarding performance for the care of people with serious illness yielded 277 articles. We identified three current public programs that currently link measures of quality and spending—or are likely to within the next few years—the Oncology Care Model; the Comprehensive End-Stage Renal Disease Model; and Home Health Value-Based Purchasing. Models that link quality and spending consist of four core components: (1) measuring quality, (2) measuring spending, (3) the payment adjustment model, and (4) the linking/incentive model. We found that current efforts to reward value for seriously ill patients are targeted for specific patient populations, do not broadly encourage the use of palliative care, and have not closely aligned quality and spending measures related to palliative care. Conclusions: We develop recommendations for policymakers and stakeholders about how measures of spending and quality can be balanced in value-based payment programs. PMID:29091529
Space Station Application of Simulator-Developed Aircrew Coordination and Performance Measures

NASA Technical Reports Server (NTRS)

Murphy, Miles

1985-01-01

This paper summarizes a study in progress at NASA/Ames Research Center to develop measures of aircrew coordination and decision-making factors and to relate them to flight task performance, that is, to crew and system performance measures. The existence of some similar interpersonal process and task performance requirements suggests a potential application of these methods in space station crew research -- particularly research conducted in ground-based mock-ups. The secondary objective of this study should also be of interest: to develop information on crew process and performance for application in developing crew training programs.
Design logistics performance measurement model of automotive component industry for srengthening competitiveness of dealing AEC 2015

NASA Astrophysics Data System (ADS)

Amran, T. G.; Janitra Yose, Mindy

2018-03-01

As the free trade Asean Economic Community (AEC) causes the tougher competition, it is important that Indonesia’s automotive industry have high competitiveness as well. A model of logistics performance measurement was designed as an evaluation tool for automotive component companies to improve their logistics performance in order to compete in AEC. The design of logistics performance measurement model was based on the Logistics Scorecard perspectives, divided into two stages: identifying the logistics business strategy to get the KPI and arranging the model. 23 KPI was obtained. The measurement result can be taken into consideration of determining policies to improve the performance logistics competitiveness.
Reactive and regulative temperament in patients with compulsive buying and non-clinical controls measured by self-report and performance-based tasks.

PubMed

Voth, Eva M; Claes, Laurence; Georgiadou, Ekaterini; Selle, Janine; Trotzke, Patrick; Brand, Matthias; de Zwaan, Martina; Müller, Astrid

2014-10-01

To examine reactive and regulative temperament in patients with compulsive buying (CB) by means of self-report measures and performance-based tasks and to explore the relationship between both measurement approaches. The study included 31 treatment-seeking patients with CB (25 women, 6 men) and an age and gender matched non-clinical control group without CB (CG). All participants answered the Compulsive Buying Scale (CBS). Reactive temperament was assessed using the Behavioral Inhibition System/Behavioral Activation System Scales (BIS/BAS) and the Iowa Gambling Task (IGT). Regulative temperament was measured using the Effortful Control subscale of the Adult Temperament Questionnaire (ATQ-EC) and a computerized version of the Stroop Task. To control the results for depression, the Patient Health Questionnaire-Depression Scale (PHQ-9) was administered. Crude group comparisons revealed higher BIS and BAS scores, poorer IGT performance and lower ATQ-EC scores in the CB-group compared to the CG. The groups did not differ in their performance on the Stroop task. After controlling for depressive symptoms that were significantly higher in the CB-group, only the group differences in BAS reactivity remained significant. No significant associations were found between questionnaires and performance-based tasks. Overall, the findings indicate that CB in the present clinical sample of treatment-seeking patients was mainly associated with higher approach tendencies and more depressive symptoms. The lacking correlation between self-reports and performance-based tasks is in line with prior research and suggests that both methodologies tap into different aspects of temperament. Copyright © 2014 Elsevier Inc. All rights reserved.

The short physical performance battery as a predictor of functional capacity after stroke.

PubMed

Stookey, Alyssa D; Katzel, Leslie I; Steinbrenner, Gregory; Shaughnessy, Marianne; Ivey, Frederick M

2014-01-01

The short physical performance battery is a widely used instrument for quantifying lower extremity function in older adults. However, its utility for predicting endurance-based measures of functional performance that are more difficult to conduct in clinical settings is unknown. An understanding of this could be particularly relevant in mobility impaired stroke survivors, for whom establishing the predictive strength of simpler to perform measures would aid in tracking broader categories of functional disability. This cross-sectional study was conducted to determine whether the short physical performance battery is related to functional measures with a strong endurance component. Functional measures (short physical performance battery, peak aerobic capacity, and 6-minute walk) were obtained and compared for the first time in stroke survivors with hemiparetic gait. Pearson correlation coefficients were used to assess strength of the relationships (α P < .05). Forty-three stroke participants performed a standardized short physical performance battery. Forty-one of the subjects completed a 6-minute walk, and 40 completed a peak treadmill test. Mean short physical performance battery (6.3 ± 2.5 [mean ± SD]), 6-minute walk (242 ± 115 meters), and peak aerobic capacity (17.4 ± 5.4 mL/kg/min) indicated subjects had moderate to severely impaired lower extremity functional performance. The short physical performance battery was related to both 6-minute walk (r = 0.76; P < .0001) and peak fitness (r = 0.52; P < .001). Our results show that the short physical performance battery may be reflective of endurance-based, longer-distance performance measures that would be difficult to perform in standard clinical stroke settings. Additional studies are needed to explore the value of using the short physical performance battery to assess rehabilitation-related functional progression after stroke. Published by Elsevier Inc.
Determining Risk of Falls in Community Dwelling Older Adults: A Systematic Review and Meta-analysis Using Posttest Probability.

PubMed

Lusardi, Michelle M; Fritz, Stacy; Middleton, Addie; Allison, Leslie; Wingood, Mariana; Phillips, Emma; Criss, Michelle; Verma, Sangita; Osborne, Jackie; Chui, Kevin K

Falls and their consequences are significant concerns for older adults, caregivers, and health care providers. Identification of fall risk is crucial for appropriate referral to preventive interventions. Falls are multifactorial; no single measure is an accurate diagnostic tool. There is limited information on which history question, self-report measure, or performance-based measure, or combination of measures, best predicts future falls. First, to evaluate the predictive ability of history questions, self-report measures, and performance-based measures for assessing fall risk of community-dwelling older adults by calculating and comparing posttest probability (PoTP) values for individual test/measures. Second, to evaluate usefulness of cumulative PoTP for measures in combination. To be included, a study must have used fall status as an outcome or classification variable, have a sample size of at least 30 ambulatory community-living older adults (≥65 years), and track falls occurrence for a minimum of 6 months. Studies in acute or long-term care settings, as well as those including participants with significant cognitive or neuromuscular conditions related to increased fall risk, were excluded. Searches of Medline/PubMED and Cumulative Index of Nursing and Allied Health (CINAHL) from January 1990 through September 2013 identified 2294 abstracts concerned with fall risk assessment in community-dwelling older adults. Because the number of prospective studies of fall risk assessment was limited, retrospective studies that classified participants (faller/nonfallers) were also included. Ninety-five full-text articles met inclusion criteria; 59 contained necessary data for calculation of PoTP. The Quality Assessment Tool for Diagnostic Accuracy Studies (QUADAS) was used to assess each study's methodological quality. Study design and QUADAS score determined the level of evidence. Data for calculation of sensitivity (Sn), specificity (Sp), likelihood ratios (LR), and PoTP values were available for 21 of 46 measures used as search terms. An additional 73 history questions, self-report measures, and performance-based measures were used in included articles; PoTP values could be calculated for 35. Evidence tables including PoTP values were constructed for 15 history questions, 15 self-report measures, and 26 performance-based measures. Recommendations for clinical practice were based on consensus. Variations in study quality, procedures, and statistical analyses challenged data extraction, interpretation, and synthesis. There was insufficient data for calculation of PoTP values for 63 of 119 tests. No single test/measure demonstrated strong PoTP values. Five history questions, 2 self-report measures, and 5 performance-based measures may have clinical usefulness in assessing risk of falling on the basis of cumulative PoTP. Berg Balance Scale score (≤50 points), Timed Up and Go times (≥12 seconds), and 5 times sit-to-stand times (≥12) seconds are currently the most evidence-supported functional measures to determine individual risk of future falls. Shortfalls identified during review will direct researchers to address knowledge gaps.
ACCF/AHA methodology for the development of quality measures for cardiovascular technology: a report of the American College of Cardiology Foundation/American Heart Association Task Force on Performance Measures.

PubMed

Bonow, Robert O; Douglas, Pamela S; Buxton, Alfred E; Cohen, David J; Curtis, Jeptha P; Delong, Elizabeth; Drozda, Joseph P; Ferguson, T Bruce; Heidenreich, Paul A; Hendel, Robert C; Masoudi, Frederick A; Peterson, Eric D; Taylor, Allen J

2011-09-27

Consistent with the growing national focus on healthcare quality, the American College of Cardiology Foundation (ACCF) and the American Heart Association (AHA) have taken a leadership role over the past decade in developing measures of the quality of cardiovascular care by convening a joint ACCF/AHA Task Force on Performance Measures. The Task Force is charged with identifying the clinical topics appropriate for the development of performance measures and with assembling writing committees composed of clinical and methodological experts in collaboration with appropriate subspecialty societies. The Task Force has also created methodology documents that offer guidance in the development of process, outcome, composite, and efficiency measures. Cardiovascular performance measures using existing ACCF/AHA methodology are based on Class I or Class III guidelines recommendations, usually with Level A evidence. These performance measures, based on evidence-based ACCF/AHA guidelines, remain the most rigorous quality measures for both internal quality improvement and public reporting. However, many of the tools for diagnosis and treatment of cardiovascular disease involve advanced technologies, such as cardiac imaging, for which there are often no underlying guideline documents. Because these technologies affect the quality of cardiovascular care and also have the potential to contribute to cardiovascular health expenditures, there is a need for more critical assessment of the use of technology, including the development of quality and performance measures in areas in which guideline recommendations are absent. The evaluation of quality in the use of cardiovascular technologies requires consideration of multiple parameters that differ from other healthcare processes. The present document describes methodology for development of 2 new classes of quality measures in these situations, appropriate use measures and structure/safety measures. Appropriate use measures are based on specific indications, processes, or parameters of care for which high level of evidence data and Class I or Class III guideline recommendations may be lacking but are addressed in ACCF appropriate use criteria documents. Structure/safety measures represent measures developed to address structural aspects of the use of healthcare technology (e.g., laboratory accreditation, personnel training, and credentialing) or quality issues related to patient safety when there are neither guidelines recommendations nor appropriate use criteria. Although the strength of evidence for appropriate use measures and structure/safety measures may not be as strong as that for formal performance measures, they are quality measures that are otherwise rigorously developed, reviewed, tested, and approved in the same manner as ACCF/AHA performance measures. The ultimate goal of the present document is to provide direction in defining and measuring the appropriate use-avoiding not only underuse but also overuse and misuse-and proper application of cardiovascular technology and to describe how such appropriate use measures and structure/safety measures might be developed for the purposes of quality improvement and public reporting. It is anticipated that this effort will help focus the national dialogue on the use of cardiovascular technology and away from the current concerns about volume and cost alone to a more holistic emphasis on value. Copyright © 2011 American College of Cardiology Foundation and the American Heart Association, Inc. Published by Elsevier Inc. All rights reserved.
Performability modeling based on real data: A case study

NASA Technical Reports Server (NTRS)

Hsueh, M. C.; Iyer, R. K.; Trivedi, K. S.

1988-01-01

Described is a measurement-based performability model based on error and resource usage data collected on a multiprocessor system. A method for identifying the model structure is introduced and the resulting model is validated against real data. Model development from the collection of raw data to the estimation of the expected reward is described. Both normal and error behavior of the system are characterized. The measured data show that the holding times in key operational and error states are not simple exponentials and that a semi-Markov process is necessary to model system behavior. A reward function, based on the service rate and the error rate in each state, is then defined in order to estimate the performability of the system and to depict the cost of apparent types of errors.
Performability modeling based on real data: A casestudy

NASA Technical Reports Server (NTRS)

Hsueh, M. C.; Iyer, R. K.; Trivedi, K. S.

1987-01-01

Described is a measurement-based performability model based on error and resource usage data collected on a multiprocessor system. A method for identifying the model structure is introduced and the resulting model is validated against real data. Model development from the collection of raw data to the estimation of the expected reward is described. Both normal and error behavior of the system are characterized. The measured data show that the holding times in key operational and error states are not simple exponentials and that a semi-Markov process is necessary to model the system behavior. A reward function, based on the service rate and the error rate in each state, is then defined in order to estimate the performability of the system and to depict the cost of different types of errors.
Mining Formative Evaluation Rules Using Web-Based Learning Portfolios for Web-Based Learning Systems

ERIC Educational Resources Information Center

Chen, Chih-Ming; Hong, Chin-Ming; Chen, Shyuan-Yi; Liu, Chao-Yu

2006-01-01

Learning performance assessment aims to evaluate what knowledge learners have acquired from teaching activities. Objective technical measures of learning performance are difficult to develop, but are extremely important for both teachers and learners. Learning performance assessment using learning portfolios or web server log data is becoming an…
Assessing Outside the Bubble: Performance Assessment for Common Core State Standards

ERIC Educational Resources Information Center

Bishop, Jesica M.; Bristow, Lora J.; Coriell, Bryn P.; Jensen, Mark E.; Johnson, Leif E.; Luring, Sara R.; Lyons-Tinsley, Mary Ann; Mefford, Megan M.; Neu, Gwen L.; Samulski, Emerson T.; Warner, Timothy D.; White, Mathew F.

2011-01-01

The adoption of Common Core State Standards has increased the need for assessments capable of measuring more performance-based outcomes. This monograph brings together the current literature and resources for the development and implementation of performance assessment. The text was written as part of a project-based graduate course and has…
Comparing Student Performance on Paper-and-Pencil and Computer-Based-Tests

ERIC Educational Resources Information Center

Hardcastle, Joseph; Herrmann-Abell, Cari F.; DeBoer, George E.

2017-01-01

Can student performance on computer-based tests (CBT) and paper-and-pencil tests (PPT) be considered equivalent measures of student knowledge? States and school districts are grappling with this question, and although studies addressing this question are growing, additional research is needed. We report on the performance of students who took…
Impact of Intended and Unintended Outcomes of Performance-Based Funding on Community Colleges

ERIC Educational Resources Information Center

Smith, Charanne P.

2015-01-01

Nationally, state and federal legislative bodies are increasingly requiring higher education institutions to demonstrate a solid return on investment. One of the key ways to do this is through performance based funding which links funding received to specific institutional performance measures and outcomes including graduation, and/or completion…
SELECTION OF ENDOCRINOLOGY SUBSPECIALTY TRAINEES: WHICH APPLICANT CHARACTERISTICS ARE ASSOCIATED WITH PERFORMANCE DURING FELLOWSHIP TRAINING?

PubMed Central

Natt, Neena; Chang, Alice Y.; Berbari, Elie F.; Kennel, Kurt A.; Kearns, Ann E.

2016-01-01

Objective To determine which residency characteristics are associated with performance during endocrinology fellowship training as measured by competency-based faculty evaluation scores and faculty global ratings of trainee performance. Method We performed a retrospective review of interview applications from endocrinology fellows who graduated from a single academic institution between 2006 and 2013. Performance measures included competency-based faculty evaluation scores and faculty global ratings. The association between applicant characteristics and measures of performance during fellowship was examined by linear regression. Results The presence of a laudatory comparative statement in the residency program director’s letter of recommendation (LoR) or experience as a chief resident was significantly associated with competency-based faculty evaluation scores (β = 0.22, P = 0.001; and β = 0.24, P = 0.009, respectively) and faculty global ratings (β = 0.85, P = 0.006; and β = 0.96, P = 0.015, respectively). Conclusion The presence of a laudatory comparative statement in the residency program director’s LoR or experience as a chief resident were significantly associated with overall performance during subspecialty fellowship training. Future studies are needed in other cohorts to determine the broader implications of these findings in the application and selection process. PMID:26437219
Subcopula-based measure of asymmetric association for contingency tables.

PubMed

Wei, Zheng; Kim, Daeyoung

2017-10-30

For the analysis of a two-way contingency table, a new asymmetric association measure is developed. The proposed method uses the subcopula-based regression between the discrete variables to measure the asymmetric predictive powers of the variables of interest. Unlike the existing measures of asymmetric association, the subcopula-based measure is insensitive to the number of categories in a variable, and thus, the magnitude of the proposed measure can be interpreted as the degree of asymmetric association in the contingency table. The theoretical properties of the proposed subcopula-based asymmetric association measure are investigated. We illustrate the performance and advantages of the proposed measure using simulation studies and real data examples. Copyright © 2017 John Wiley & Sons, Ltd.
Lessons from Five States: Public Sector Use of Washington Circle Performance Measures

PubMed Central

Garnick, Deborah W.; Lee, Margaret T.; Horgan, Constance; Acevedo, Andrea; Botticelli, Michael; Clark, Spencer; Davis, Steven; Gallati, Robert; Haberlin, Karin; Hanchett, Andrew; Lambert–Wacey, Dawn; Leeper, Tracy; Siemianowski, James; Tikoo, Minakshi

2011-01-01

Five states (Connecticut, Massachusetts, New York, North Carolina, and Oklahoma) have incorporated Washington Circle (WC) substance abuse performance measures in various ways into their quality improvement strategies. In this paper we focus on what other states and local providers might learn from these states’ experiences as they consider using WC performance measures. Using a case study approach, we report that the use of WC measures differs across these five states, although there are important common themes required for adoption and sustainability of performance measures which include: leadership, evaluation of specification and use of measures over time, state-specific adaptation of the WC measure specifications, collaboration with consultants and partners, inclusion of WC measures in the context of other initiatives, reporting to providers and the public, and data and resource requirements. As additional states adopt some of the WC measures, or adopt other performance measurement approaches, these states’ experiences could help them to develop implementations based on their particular needs. PMID:21257282
The current state of nursing performance measurement, public reporting, and value-based purchasing.

PubMed

Kurtzman, Ellen T; Dawson, Ellen M; Johnson, Jean E

2008-08-01

Over the last decade, there has been a substantial investment in holding health care providers accountable for the quality of care provided in hospitals and other settings of care. This investment has been realized through the proliferation of national policies that address performance measurement, public reporting, and value-based purchasing. Although nurses represent the largest segment of the health care workforce and despite their acknowledged role in patient safety and health care outcomes, they have been largely absent from policy setting in these areas. This article provides an analysis of current nursing performance measurement and public reporting initiatives and presents a summary of emerging trends in value-based purchasing, with an emphasis on activities in the United States. The article synthesizes issues of relevance to advancing the current climate for nursing quality and concludes with key issues for future policy setting.
Launch Vehicle Base Buffeting- Recent Experimental And Numerical Investigations

NASA Astrophysics Data System (ADS)

Hannemann, K.; Ludeke, H.; Pallegoix, J.-F.; Ollivier, A.; Lambare, H.; Maseland, J. E. J.; Geurts, E. G. M.; Frey, M.; Deck, S.; Schrijer, F. F. J.; Scarano, F.; Schwane, R.

2011-05-01

During atmospheric ascent of launcher configurations, a massively separated flow environment in the base region of the launcher can generate strong low frequency wall pressure fluctuations. The nozzle structure can be subjected to dynamic loads resulting from these pressure fluctuations. The loads are usually most severe during the high dynamic pressure phase of flight at transonic speeds and the aerodynamic excitation can induce a response of the structural modes called buffeting. In order to obtain a deeper insight into base buffeting related to the Ariane 5 launch vehicle, a set of experiments was performed in the DNW HST wind tunnel in close cooperation with the utilization of modern CFD tools (hybrid RANS/LES). During the test campaign a 1/60 scale Ariane 5 launcher test article was utilized, and detailed unsteady pressure measurements in the base region of the model were for the first time performed in conjunction with time resolved velocity field measurements using PIV. The work was performed in the framework of the ESA TRP “Unsteady Subscale Force Measurements within a Launch Vehicle Base Buffeting Environment”.
Research on droplet size measurement of impulse antiriots water cannon based on sheet laser

NASA Astrophysics Data System (ADS)

Fa-dong, Zhao; Hong-wei, Zhuang; Ren-jun, Zhan

2014-04-01

As a new-style counter-personnel non-lethal weapon, it is the non-steady characteristic and large water mist field that increase the difficulty of measuring the droplet size distribution of impulse anti-riots water cannon which is the most important index to examine its tactical and technology performance. A method based on the technologies of particle scattering, sheet laser imaging and high speed handling was proposed and an universal droplet size measuring algorithm was designed and verified. According to this method, the droplet size distribution was measured. The measuring results of the size distribution under the same position with different timescale, the same axial distance with different radial distance, the same radial distance with different axial distance were analyzed qualitatively and some rational cause was presented. The droplet size measuring method proposed in this article provides a scientific and effective experiment method to ascertain the technical and tactical performance and optimize the relative system performance.
Retrospective Analysis of an Ongoing Group-Based Modified Constraint-Induced Movement Therapy Program for Children with Acquired Brain Injury.

PubMed

Komar, Alyssa; Ashley, Kelsey; Hanna, Kelly; Lavallee, Julia; Woodhouse, Janet; Bernstein, Janet; Andres, Matthew; Reed, Nick

2016-01-01

A pretest-posttest retrospective design was used to evaluate the impact of a group-based modified constraint-induced movement therapy (mCIMT) program on upper extremity function and occupational performance. 20 children ages 3 to 18 years with hemiplegia following an acquired brain injury participated in a 2-week group mCIMT program. Upper extremity function was measured with the Assisting Hand Assessment (AHA) and subtests from the Quality of Upper Extremity Skills Test (QUEST). Occupational performance and satisfaction were assessed using the Canadian Occupational Performance Measure (COPM). Data were analyzed using a Wilcoxon signed-ranks test. Group-based analysis revealed upper extremity function and occupational performance attained statistically significant improvements from pre- to postintervention on all outcome measures (AHA: Z = -3.63, p = <.001; QUEST Grasps: Z = -3.10, p = .002; QUEST Dissociated Movement: Z = -2.51, p = .012; COPM Performance: Z = -3.64, p = <.001; COPM Satisfaction: Z = -3.64, p = <.001). Across individuals, clinically significant improvements were found in 65% of participants' AHA scores. 80% of COPM Performance scores and 70% of COPM Satisfaction scores demonstrated clinically significant improvements in at least one identified goal. This study is an initial step in evaluating and providing preliminary evidence supporting the effectiveness of a group-based mCIMT program for children with hemiplegia following an acquired brain injury.
Curriculum-Based Measurement in the Content Areas: Vocabulary Matching as an Indicator of Progress in Social Studies Learning

ERIC Educational Resources Information Center

Espin, Christine A.; Shin, Jongho; Busch, Todd W.

2005-01-01

The purpose of this study was to examine the reliability and validity of curriculum-based measures as indicator of growth in content-area learning. Participants were 58 students in 2 seventh-grade social studies classes. CBM measures were student- and administrator-read vocabulary-matching probes. Criterion measures were performance on a knowledge…
Development, implementation, and characterization of a standalone embedded viscosity measurement system based on the impedance spectroscopy of a vibrating wire sensor

NASA Astrophysics Data System (ADS)

Santos, José; Janeiro, Fernando M.; Ramos, Pedro M.

2015-10-01

This paper presents an embedded liquid viscosity measurement system based on a vibrating wire sensor. Although multiple viscometers based on different working principles are commercially available, there is still a market demand for a dedicated measurement system capable of performing accurate, fast measurements and requiring little or no operator training for simple systems and solution monitoring. The developed embedded system is based on a vibrating wire sensor that works by measuring the impedance response of the sensor, which depends on the viscosity and density of the liquid in which the sensor is immersed. The core of the embedded system is a digital signal processor (DSP) which controls the waveform generation and acquisitions for the measurement of the impedance frequency response. The DSP also processes the acquired waveforms and estimates the liquid viscosity. The user can interact with the measurement system through a keypad and an LCD or through a computer with a USB connection for data logging and processing. The presented system is tested on a set of viscosity standards and the estimated values are compared with the standard manufacturer specified viscosity values. A stability study of the measurement system is also performed.
Use of a Commercially Available Flight Simulator during Aircrew Performance Testing.

DTIC Science & Technology

1991-11-01

Automiated Battery of Performance-based Tests, NAMRL 1354, Naval Aerospace Medical Research Laboratory, Pensacola, FL, 1990. 13. Human Performance...ability of an aircraft to remain airborne well beyond the limits of its human operator. This capacity for longer flights, coupled with a tendency for short...Measurement, Final Report, Air Force Human Resources Laboratory, Brooks AFB, TX, 1983. 5. Stein, E.S., Measurement of Pilot Performance: A Master Journeyman
What can the national quality forum tell us about performance measurement in anesthesiology?

PubMed

Hyder, Joseph A; Niconchuk, Jonathan; Glance, Laurent G; Neuman, Mark D; Cima, Robert R; Dutton, Richard P; Nguyen, Louis L; Fleisher, Lee A; Bader, Angela M

2015-02-01

Anesthesiologists face increasing pressure to demonstrate the value of the care they provide, whether locally or nationally through public reporting and payor requirements. In this article, we describe the current state of performance measurement in anesthesia care at the national level and highlight gaps and opportunities in performance measurement for anesthesiologists. We evaluated all endorsed performance measures in the National Quality Forum (NQF), the clearinghouse for all federal performance measures, and classified all measures as follows: (1) anesthesia-specific; (2) surgery-specific; (3) jointly attributable; or (4) other. We used NQF-provided descriptors to characterize measures in terms of (1) structure, process, outcome, or efficiency; (2) patients, disease, and events targeted; (3) procedural specialty; (4) reporting eligibility; (5) measures stewards; and (6) timing in the care stream. Of the 637 endorsed performance measures, few (6, 1.0%) were anesthesia-specific. An additional 39 measures (6.1%) were surgery-specific, and 67 others (10.5%) were jointly attributable. "Anesthesia-specific" measures addressed preoperative antibiotic timing (n = 4), normothermia (n = 1), and protocol use for the placement of central venous catheter (n = 1). Jointly attributable measures included outcome measures (n = 49/67, 73.1%), which were weighted toward mortality alone (n = 24) and cardiac surgery (n = 14). Other jointly attributable measures addressed orthopedic surgery (n = 4), general surgical oncologic resections (n = 12), or nonspecified surgeries (n = 15), but none specifically addressed anesthesia care outside the operating room such as for endoscopy. Only 4 measures were eligible for value-based purchasing. No named anesthesiology professional groups were among measure stewards, but surgical professional groups (n = 33/67, 47%) were frequent measure stewards. Few NQF performance measures are specific to anesthesia practice, and none of these appears to demonstrate the value of anesthesia care or differentiate high-quality providers. To demonstrate their role in patient-centered, outcome-driven care, anesthesiologists may consider actively partnering in jointly attributable or team-based reporting. Future measures may incorporate surgical procedures not proportionally represented, as well as procedural and sedation care provided in nonoperating room settings.

Improving the Selection, Classification, and Utilization of Army Enlisted Personnel. Annual Report, 1985 Fiscal Year. Supplement

DTIC Science & Technology

1987-10-01

PERFORMING ORGANIZATION NAME AND ADDRESS 10. PROGRAM ELEMENT, PROJECT, TASK Human Resources Research Organization 2 P 3 QA2 79 9"INiTNUMBERS 1100...classification tests which will validly predict carefully developed measures of job performance . The project addresses the 675,000-person enlisted personnel...are to include both Army-wide job performance measures based on newly developed rating scales, and direct hands-on measures of MOS-specific task
PERFORMANCE MEASUREMENT IN TRIBAL HOME VISITING: CHALLENGES AND OPPORTUNITIES.

PubMed

Morales, Julie R; Ferron, Cathy; Whitmore, Corrie; Reifel, Nancy; Geary, Erin; Anderson, Cyndi; Mcdaniel, Judy

2018-05-01

Over the last several decades, performance measurement has become an increasingly prevalent requirement among human services agencies for demonstrating program progress and achieving outcomes. In the Tribal Maternal, Infant, and Early Childhood Home Visiting Program (Tribal MIECHV), performance measurement was one of the central components of the Administration for Children and Families' cooperative agreements to tribes, urban Indian organizations, and tribal organizations. Since the inception of the Tribal MIECHV Program in 2010, the benchmark requirement was intended to be a mechanism to systematically monitor program progress and performance toward improving the quality of home-visiting programs that serve vulnerable American Indian or Alaska Native families. In this article, we examine performance measurement in the context of Tribal MIECHV, providing an overview of performance measurement, the Tribal MIECHV requirement, and how grantees experienced the requirement; we describe the existing literature on performance measurement challenges and benefits, and the specific challenges and advantages experienced by tribal grantees; and provide recommendations for performance measurement in tribal home-visiting contexts based on grantees' own experiences. This article contributes to the literature by examining performance measurement challenges and opportunities in the context of tribal communities, and provides recommendations that may inform future policy on performance measurement design and implementation in tribal communities. © 2018 Michigan Association for Infant Mental Health.
An orthogonal return method for linearly polarized beam based on the Faraday effect and its application in interferometer

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chen, Benyong, E-mail: chenby@zstu.edu.cn; Zhang, Enzheng; Yan, Liping

2014-10-15

Correct return of the measuring beam is essential for laser interferometers to carry out measurement. In the actual situation, because the measured object inevitably rotates or laterally moves, not only the measurement accuracy will decrease, or even the measurement will be impossibly performed. To solve this problem, a novel orthogonal return method for linearly polarized beam based on the Faraday effect is presented. The orthogonal return of incident linearly polarized beam is realized by using a Faraday rotator with the rotational angle of 45°. The optical configuration of the method is designed and analyzed in detail. To verify its practicabilitymore » in polarization interferometry, a laser heterodyne interferometer based on this method was constructed and precision displacement measurement experiments were performed. These results show that the advantage of the method is that the correct return of the incident measuring beam is ensured when large lateral displacement or angular rotation of the measured object occurs and then the implementation of interferometric measurement can be ensured.« less
Polarization-Analyzing CMOS Image Sensor With Monolithically Embedded Polarizer for Microchemistry Systems.

PubMed

Tokuda, T; Yamada, H; Sasagawa, K; Ohta, J

2009-10-01

This paper proposes and demonstrates a polarization-analyzing CMOS sensor based on image sensor architecture. The sensor was designed targeting applications for chiral analysis in a microchemistry system. The sensor features a monolithically embedded polarizer. Embedded polarizers with different angles were implemented to realize a real-time absolute measurement of the incident polarization angle. Although the pixel-level performance was confirmed to be limited, estimation schemes based on the variation of the polarizer angle provided a promising performance for real-time polarization measurements. An estimation scheme using 180 pixels in a 1deg step provided an estimation accuracy of 0.04deg. Polarimetric measurements of chiral solutions were also successfully performed to demonstrate the applicability of the sensor to optical chiral analysis.
Virtual reality measures in neuropsychological assessment: a meta-analytic review.

PubMed

Neguț, Alexandra; Matu, Silviu-Andrei; Sava, Florin Alin; David, Daniel

2016-02-01

Virtual reality-based assessment is a new paradigm for neuropsychological evaluation, that might provide an ecological assessment, compared to paper-and-pencil or computerized neuropsychological assessment. Previous research has focused on the use of virtual reality in neuropsychological assessment, but no meta-analysis focused on the sensitivity of virtual reality-based measures of cognitive processes in measuring cognitive processes in various populations. We found eighteen studies that compared the cognitive performance between clinical and healthy controls on virtual reality measures. Based on a random effects model, the results indicated a large effect size in favor of healthy controls (g = .95). For executive functions, memory and visuospatial analysis, subgroup analysis revealed moderate to large effect sizes, with superior performance in the case of healthy controls. Participants' mean age, type of clinical condition, type of exploration within virtual reality environments, and the presence of distractors were significant moderators. Our findings support the sensitivity of virtual reality-based measures in detecting cognitive impairment. They highlight the possibility of using virtual reality measures for neuropsychological assessment in research applications, as well as in clinical practice.
Measuring Performance with Library Automated Systems.

ERIC Educational Resources Information Center

OFarrell, John P.

2000-01-01

Investigates the capability of three library automated systems to generate some of the datasets necessary to form the ISO (International Standards Organization) standard on performance measurement within libraries, based on research in Liverpool John Moores University (United Kingdom). Concludes that the systems are weak in generating the…
Performance measures to characterize directional corridor travel time delay based on probe vehicle data : final report.

DOT National Transportation Integrated Search

2015-10-01

Anonymous probe vehicle data are currently being collected on roadways throughout the United States. These data are being incorporated into local and statewide mobility reports to measure the performance of freeways and arterial systems. Predefined s...
Derivation and Cross-Validation of Cutoff Scores for Patients With Schizophrenia Spectrum Disorders on WAIS-IV Digit Span-Based Performance Validity Measures.

PubMed

Glassmire, David M; Toofanian Ross, Parnian; Kinney, Dominique I; Nitch, Stephen R

2016-06-01

Two studies were conducted to identify and cross-validate cutoff scores on the Wechsler Adult Intelligence Scale-Fourth Edition Digit Span-based embedded performance validity (PV) measures for individuals with schizophrenia spectrum disorders. In Study 1, normative scores were identified on Digit Span-embedded PV measures among a sample of patients (n = 84) with schizophrenia spectrum diagnoses who had no known incentive to perform poorly and who put forth valid effort on external PV tests. Previously identified cutoff scores resulted in unacceptable false positive rates and lower cutoff scores were adopted to maintain specificity levels ≥90%. In Study 2, the revised cutoff scores were cross-validated within a sample of schizophrenia spectrum patients (n = 96) committed as incompetent to stand trial. Performance on Digit Span PV measures was significantly related to Full Scale IQ in both studies, indicating the need to consider the intellectual functioning of examinees with psychotic spectrum disorders when interpreting scores on Digit Span PV measures. © The Author(s) 2015.
Linking clinician interaction and coordination to clinical performance in Patient-Aligned Care Teams.

PubMed

Hysong, Sylvia J; Thomas, Candice L; Spitzmüller, Christiane; Amspoker, Amber B; Woodard, LeChauncy; Modi, Varsha; Naik, Aanand D

2016-01-15

Team coordination within clinical care settings is a critical component of effective patient care. Less is known about the extent, effectiveness, and impact of coordination activities among professionals within VA Patient-Aligned Care Teams (PACTs). This study will address these gaps by describing the specific, fundamental tasks and practices involved in PACT coordination, their impact on performance measures, and the role of coordination task complexity. First, we will use a web-based survey of coordination practices among 1600 PACTs in the national VHA. Survey findings will characterize PACT coordination practices and assess their association with clinical performance measures. Functional job analysis, using 6-8 subject matter experts who are 3rd and 4th year residents in VA Primary Care rotations, will be utilized to identify the tasks involved in completing clinical performance measures to standard. From this, expert ratings of coordination complexity will be used to determine the level of coordinative complexity required for each of the clinical performance measures drawn from the VA External Peer Review Program (EPRP). For objective 3, data collected from the first two methods will evaluate the effect of clinical complexity on the relationships between measures of PACT coordination and their ratings on the clinical performance measures. Results from this study will support successful implementation of coordinated team-based work in clinical settings by providing knowledge regarding which aspects of care require the most complex levels of coordination and how specific coordination practices impact clinical performance.
Nonstructural urban stormwater quality measures: building a knowledge base to improve their use.

PubMed

Taylor, André C; Fletcher, Tim D

2007-05-01

This article summarizes a research project that investigated the use, performance, cost, and evaluation of nonstructural measures to improve urban stormwater quality. A survey of urban stormwater managers from Australia, New Zealand, and the United States revealed a widespread trend of increasing use of nonstructural measures among leading stormwater management agencies, with at least 76% of 41 types of nonstructural measures being found to be increasing in use. Data gathered from the survey, an international literature review, and a multicriteria analysis highlighted four nonstructural measures of greatest potential value: mandatory town planning controls that promote the adoption of low-impact development principles and techniques; development of strategic urban stormwater management plans for a city, shire, or catchment; stormwater management measures and programs for construction/building sites; and stormwater management activities related to municipal maintenance operations such as maintenance of the stormwater drainage network and manual litter collections. Knowledge gained on the use and performance of nonstructural measures from the survey, literature review, and three trial evaluation projects was used to develop tailored monitoring and evaluation guidelines for these types of measure. These guidelines incorporate a new evaluation framework based on seven alternative styles of evaluation that range from simply monitoring whether a nonstructural measure has been fully implemented to monitoring its impact on waterway health. This research helps to build the stormwater management industry's knowledge base concerning nonstructural measures and provides a practical tool to address common impediments associated with monitoring and evaluating the performance and cost of these measures.
A Measurement and Simulation Based Methodology for Cache Performance Modeling and Tuning

NASA Technical Reports Server (NTRS)

Waheed, Abdul; Yan, Jerry; Saini, Subhash (Technical Monitor)

1998-01-01

We present a cache performance modeling methodology that facilitates the tuning of uniprocessor cache performance for applications executing on shared memory multiprocessors by accurately predicting the effects of source code level modifications. Measurements on a single processor are initially used for identifying parts of code where cache utilization improvements may significantly impact the overall performance. Cache simulation based on trace-driven techniques can be carried out without gathering detailed address traces. Minimal runtime information for modeling cache performance of a selected code block includes: base virtual addresses of arrays, virtual addresses of variables, and loop bounds for that code block. Rest of the information is obtained from the source code. We show that the cache performance predictions are as reliable as those obtained through trace-driven simulations. This technique is particularly helpful to the exploration of various "what-if' scenarios regarding the cache performance impact for alternative code structures. We explain and validate this methodology using a simple matrix-matrix multiplication program. We then apply this methodology to predict and tune the cache performance of two realistic scientific applications taken from the Computational Fluid Dynamics (CFD) domain.
Composite Quality Measures for Common Inpatient Medical Conditions

PubMed Central

Chen, Lena M.; Staiger, Douglas O.; Birkmeyer, John D.; Ryan, Andrew M.; Zhang, Wenying; Dimick, Justin B.

2014-01-01

Background Public reporting on quality aims to help patients select better hospitals. However, individual quality measures are sub-optimal in identifying superior and inferior hospitals based on outcome performance. Objective To combine structure, process, and outcome measures into an empirically-derived composite quality measure for heart failure (HF), acute myocardial infarction (AMI), and pneumonia (PNA). To assess how well the composite measure predicts future high and low performers, and explains variance in future hospital mortality. Research Design Using national Medicare data, we created a cohort of older patients treated at an acute care hospital for HF (n=1,203,595), AMI (n=625,595), or PNA (n=1,234,299). We ranked hospitals based on their July 2005 to June 2008 performance on the composite. We then estimated the odds of future (July to December 2009) 30-day, risk-adjusted mortality at the worst vs. best quintile of hospitals. We repeated this analysis using 2005-2008 performance on existing quality indicators, including mortality. Results The composite (vs. Hospital Compare) explained 68% (vs. 39%) of variation in future AMI mortality rates. In 2009, if an AMI patient had chosen a hospital in the worst vs. best quintile of performance using 2005-2008 composite (vs. Hospital Compare) rankings, he or she would have had 1.61 (vs. 1.39) times the odds of dying in 30 days (p-value for difference < 0.001). Results were similar for HF and PNA. Conclusions Composite measures of quality for HF, AMI, and PNA performed better than existing measures at explaining variation in future mortality and predicting future high and low performers. PMID:23942222
Neuroimaging correlates of parent ratings of working memory in typically developing children

PubMed Central

Mahone, E. Mark; Martin, Rebecca; Kates, Wendy R.; Hay, Trisha; Horská, Alena

2009-01-01

The purpose of the present study was to investigate construct validity of parent ratings of working memory in children, using a multi-trait/multi-method design including neuroimaging, rating scales, and performance-based measures. Thirty-five typically developing children completed performance-based tests of working memory and nonexecutive function (EF) skills, received volumetric MRI, and were rated by parents on both EF-specific and broad behavior rating scales. After controlling for total cerebral volume and age, parent ratings of working memory were significantly correlated with frontal gray, but not temporal, parietal, or occipital gray, or any lobar white matter volumes. Performance-based measures of working memory were also moderately correlated with frontal lobe gray matter volume; however, non-EF parent ratings and non-EF performance-based measures were not correlated with frontal lobe volumes. Results provide preliminary support for the convergent and discriminant validity of parent ratings of working memory, and emphasize their utility in exploring brain–behavior relationships in children. Rating scales that directly examine EF skills may potentially have ecological validity, not only for “everyday” function, but also as correlates of brain volume. PMID:19128526
Comparison of Hybrid K-Edge Densitometer (HKED) Performance Operating with the Canberra Lynx MCA and the Canberra ICB-NIM Electronics

DOE Office of Scientific and Technical Information (OSTI.GOV)

McElroy, Robert Dennis

From the 1991 until 2008 the Canberra Hybrid K-Edge Densitometer systems were provided with ICB-NIM (Integrated Control Bus – Nuclear Instrument Module) acquisition electronics. Newer electronics modules, such as the Lynx, were not supported under the VMS based operating system. The LYNX module was provided as the standard acquisition electronics following the release of the Windows based CHKED software. This report compares the electronics dead-time, gain shifts, detector resolution and measurement performance of the HKED system operated with the two types of acquisition modules. The comparison was performed using measurements obtained with the ORNL HKED system. The original intent ofmore » this study was to take advantage of both the timing and energy outputs from the HPGE detector to acquire data with both sets of electronics in parallel. Although this approach has been applied successfully with other systems, in this case we found the timing output produced a significant amount of noise such that a comparison between the electronics would be invalid. So the comparative measurements were performed sequentially. The ICB-NIM data was acquired over the course of 12 months with 255 measurements while the LYNX data was acquired over a period of 10 months with 75 measurements. To simplify the comparison, all data used in this study was acquired using the Canberra CHKED (V1.0) software package. The performance analysis was based primarily on the peak locations, peak widths and concentration values reported by the CHKED software. The raw spectra from the XRF measurements were also examined to extract additional 109Cd peak location and width data for the hybrid measurements (the standard hybrid report template does not report these values).« less
DEEP: Database of Energy Efficiency Performance

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hong, Tianzhen; Piette, Mary; Lee, Sang Hoon

A database of energy efficiency performance (DEEP) is a presimulated database to enable quick and accurate assessment of energy retrofit of commercial buildings. DEEP was compiled from results of about 10 million EnergyPlus simulations. DEEP provides energy savings for screening and evaluation of retrofit measures targeting the small and medium-sized office and retail buildings in California. The prototype building models are developed for a comprehensive assessment of building energy performance based on DOE commercial reference buildings and the California DEER [sic] prototype buildings. The prototype buildings represent seven building types across six vintages of constructions and 16 California climate zones.more » DEEP uses these prototypes to evaluate energy performance of about 100 energy conservation measures covering envelope, lighting, heating, ventilation, air conditioning, plug loads, and domestic hot war. DEEP consists the energy simulation results for individual retrofit measures as well as packages of measures to consider interactive effects between multiple measures. The large scale EnergyPlus simulations are being conducted on the super computers at the National Energy Research Scientific Computing Center (NERSC) of Lawrence Berkeley National Laboratory. The pre-simulation database is a part of the CEC PIER project to develop a web-based retrofit toolkit for small and medium-sized commercial buildings in California, which provides real-time energy retrofit feedback by querying DEEP with recommended measures, estimated energy savings and financial payback period based on users' decision criteria of maximizing energy savings, energy cost savings, carbon reduction, or payback of investment. The pre-simulated database and associated comprehensive measure analysis enhances the ability to performance assessments of retrofits to reduce energy use for small and medium buildings and business owners who typically do not have resources to conduct costly building energy audit.« less
Improving Performance on Preventive Health Quality Measures Using Clinical Decision Support to Capture Care Done Elsewhere and Patient Exceptions.

PubMed

Bowen, Michael E; Bhat, Deepa; Fish, Jason; Moran, Brett; Howell-Stampley, Temple; Kirk, Lynne; Persell, Stephen D; Halm, Ethan A

Preventive services required for performance measurement often are completed in outside health systems and not captured in electronic medical records (EMRs). A before-after study was conducted to examine the ability of clinical decision support (CDS) to improve performance on preventive quality measures, capture clinician-reported services completed elsewhere, and patient/medical exceptions and to describe their impact on quality measurement. CDS improved performance on colorectal cancer screening, osteoporosis screening, and pneumococcal vaccination measures ( P < .05) but not breast or cervical cancer screening. CDS captured clinician-reported services completed elsewhere (2% to 10%) and patient/medical exceptions (<3%). Compared to measures using only within-system data, including services completed elsewhere in the numerator improved performance: pneumococcal vaccine (73% vs 82%); breast (69% vs 75%), colorectal (58% vs 70%), and cervical cancer (53% vs 62%); and osteoporosis (72% vs 75%) screening ( P < .05). Visit-based CDS can capture clinician-reported preventive services, and accounting for services completed elsewhere improves performance on quality measures.
Psychometric properties of virtual reality vignette performance measures: a novel approach for assessing adolescents' social competency skills.

PubMed

Paschall, Mallie J; Fishbein, Diana H; Hubal, Robert C; Eldreth, Diana

2005-02-01

This study examined the psychometric properties of performance measures for three novel, interactive virtual reality vignette exercises developed to assess social competency skills of at-risk adolescents. Performance data were collected from 117 African-American male 15-17 year olds. Data for 18 performance measures were obtained, based on adolescents' interaction with a provocative virtual teenage character. Twelve of the 18 performance measures loaded on two factors corresponding to emotional control and interpersonal communication skills, providing support for their factorial validity. The internal reliability coefficients for the two multi-item measures were 0.88 and 0.91, respectively. Additional analyses with established measures of three psychosocial factors (beliefs supporting aggression, aggressive conflict-resolution style and hostility) and behavioral criteria (e.g., self-reported behavioral misconduct and drug use) provided limited support for the construct and criterion-related validity of the performance measures. Study findings suggest that the virtual reality vignette exercises may represent a promising approach for assessing adolescents' social competency skills.
Cost of Einstein-Podolsky-Rosen steering in the context of extremal boxes

NASA Astrophysics Data System (ADS)

Das, Debarshi; Datta, Shounak; Jebaratnam, C.; Majumdar, A. S.

2018-02-01

Einstein-Podolsky-Rosen steering is a form of quantum nonlocality, which is weaker than Bell nonlocality, but stronger than entanglement. Here we present a method to check Einstein-Podolsky-Rosen steering in the scenario where the steering party performs two black-box measurements and the trusted party performs projective qubit measurements corresponding to two arbitrary mutually unbiased bases. This method is based on decomposing the measurement correlations in terms of extremal boxes of the steering scenario. In this context, we propose a measure of steerability called steering cost. We show that our steering cost is a convex steering monotone. We illustrate our method to check steerability with two families of measurement correlations and find out their steering cost.
A comparison of spectral decorrelation techniques and performance evaluation metrics for a wavelet-based, multispectral data compression algorithm

NASA Technical Reports Server (NTRS)

Matic, Roy M.; Mosley, Judith I.

1994-01-01

Future space-based, remote sensing systems will have data transmission requirements that exceed available downlinks necessitating the use of lossy compression techniques for multispectral data. In this paper, we describe several algorithms for lossy compression of multispectral data which combine spectral decorrelation techniques with an adaptive, wavelet-based, image compression algorithm to exploit both spectral and spatial correlation. We compare the performance of several different spectral decorrelation techniques including wavelet transformation in the spectral dimension. The performance of each technique is evaluated at compression ratios ranging from 4:1 to 16:1. Performance measures used are visual examination, conventional distortion measures, and multispectral classification results. We also introduce a family of distortion metrics that are designed to quantify and predict the effect of compression artifacts on multi spectral classification of the reconstructed data.
Minimum detectable gas concentration performance evaluation method for gas leak infrared imaging detection systems.

PubMed

Zhang, Xu; Jin, Weiqi; Li, Jiakun; Wang, Xia; Li, Shuo

2017-04-01

Thermal imaging technology is an effective means of detecting hazardous gas leaks. Much attention has been paid to evaluation of the performance of gas leak infrared imaging detection systems due to several potential applications. The minimum resolvable temperature difference (MRTD) and the minimum detectable temperature difference (MDTD) are commonly used as the main indicators of thermal imaging system performance. This paper establishes a minimum detectable gas concentration (MDGC) performance evaluation model based on the definition and derivation of MDTD. We proposed the direct calculation and equivalent calculation method of MDGC based on the MDTD measurement system. We build an experimental MDGC measurement system, which indicates the MDGC model can describe the detection performance of a thermal imaging system to typical gases. The direct calculation, equivalent calculation, and direct measurement results are consistent. The MDGC and the minimum resolvable gas concentration (MRGC) model can effectively describe the performance of "detection" and "spatial detail resolution" of thermal imaging systems to gas leak, respectively, and constitute the main performance indicators of gas leak detection systems.

Electromagnetic fields from mobile phone base station - variability analysis.

PubMed

Bienkowski, Pawel; Zubrzak, Bartlomiej

2015-09-01

The article describes the character of electromagnetic field (EMF) in mobile phone base station (BS) surroundings and its variability in time with an emphasis on the measurement difficulties related to its pulse and multi-frequency nature. Work also presents long-term monitoring measurements performed recently in different locations in Poland - small city with dispersed building development and in major polish city - dense urban area. Authors tried to determine the trends in changing of EMF spectrum analyzing daily changes of measured EMF levels in those locations. Research was performed using selective electromagnetic meters and also EMF meter with spectrum analysis.
Performances of a HGCDTE APD based direct detection lidar at 2 μm. Application to dial measurements

NASA Astrophysics Data System (ADS)

Gibert, Fabien; Dumas, Arnaud; Rothman, Johan; Edouart, Dimitri; Cénac, Claire; Pellegrino, Jessica

2018-04-01

A lidar receiver with a direct detection chain adapted to a HgCdTe APD based detector with electric cooling is associated to a 2.05 μm Ho :YLF pulsed dual wavelength single mode transmitter to provide the first atmospheric lidar measurements using this technology. Experiments confirm the outstanding sensitivity of the detector and hightligth its huge potential for DIAL measurements of trace gas (CO2 and H2O) in this spectral domain. Performances of coherent vs direct detection at 2.05 μm is assessed.
Comparison of adaptive critic-based and classical wide-area controllers for power systems.

PubMed

Ray, Swakshar; Venayagamoorthy, Ganesh Kumar; Chaudhuri, Balarko; Majumder, Rajat

2008-08-01

An adaptive critic design (ACD)-based damping controller is developed for a thyristor-controlled series capacitor (TCSC) installed in a power system with multiple poorly damped interarea modes. The performance of this ACD computational intelligence-based method is compared with two classical techniques, which are observer-based state-feedback (SF) control and linear matrix inequality LMI-H(infinity) robust control. Remote measurements are used as feedback signals to the wide-area damping controller for modulating the compensation of the TCSC. The classical methods use a linearized model of the system whereas the ACD method is purely measurement-based, leading to a nonlinear controller with fixed parameters. A comparative analysis of the controllers' performances is carried out under different disturbance scenarios. The ACD-based design has shown promising performance with very little knowledge of the system compared to classical model-based controllers. This paper also discusses the advantages and disadvantages of ACDs, SF, and LMI-H(infinity).
A Policy Analysis of the Federal Growth Model Pilot Program's Measures of School Performance: The Florida Case

ERIC Educational Resources Information Center

Weiss, Michael J.; May, Henry

2012-01-01

As test-based educational accountability has moved to the forefront of national and state education policy, so has the desire for better measures of school performance. No Child Left Behind's (NCLB) status and safe harbor measures have been criticized for being unfair and unreliable, respectively. In response to such criticism, in 2005 the federal…
Choice and Change of Measures in Performance-Measurement Models

DTIC Science & Technology

2005-05-01

associated costs . 3 Discussions of many current accounting and performance-measurement issues can be...change: an exploratory study. Accounting , Organizations, and Society, 24(3), 189-204. Adimando, C., Butler, R., Malley, S ., Ravid, S . A., Shepro, R...impact of contextual and process factors on the evaluation of activity-based costing systems. Accounting , Organizations and Society, 24, 525-559. Antle
Mathematics Curriculum Based Measurement to Predict State Test Performance: A Comparison of Measures and Methods

ERIC Educational Resources Information Center

Stevens, Olinger; Leigh, Erika

2012-01-01

Scope and Method of Study: The purpose of the study is to use an empirical approach to identify a simple, economical, efficient, and technically adequate performance measure that teachers can use to assess student growth in mathematics. The current study has been designed to expand the body of research for math CBM to further examine technical…
Local SIMPLE multi-atlas-based segmentation applied to lung lobe detection on chest CT

NASA Astrophysics Data System (ADS)

Agarwal, M.; Hendriks, E. A.; Stoel, B. C.; Bakker, M. E.; Reiber, J. H. C.; Staring, M.

2012-02-01

For multi atlas-based segmentation approaches, a segmentation fusion scheme which considers local performance measures may be more accurate than a method which uses a global performance measure. We improve upon an existing segmentation fusion method called SIMPLE and extend it to be localized and suitable for multi-labeled segmentations. We demonstrate the algorithm performance on 23 CT scans of COPD patients using a leave-one- out experiment. Our algorithm performs significantly better (p < 0.01) than majority voting, STAPLE, and SIMPLE, with a median overlap of the fissure of 0.45, 0.48, 0.55 and 0.6 for majority voting, STAPLE, SIMPLE, and the proposed algorithm, respectively.
Cognitive load predicts point-of-care ultrasound simulator performance.

PubMed

Aldekhyl, Sara; Cavalcanti, Rodrigo B; Naismith, Laura M

2018-02-01

The ability to maintain good performance with low cognitive load is an important marker of expertise. Incorporating cognitive load measurements in the context of simulation training may help to inform judgements of competence. This exploratory study investigated relationships between demographic markers of expertise, cognitive load measures, and simulator performance in the context of point-of-care ultrasonography. Twenty-nine medical trainees and clinicians at the University of Toronto with a range of clinical ultrasound experience were recruited. Participants answered a demographic questionnaire then used an ultrasound simulator to perform targeted scanning tasks based on clinical vignettes. Participants were scored on their ability to both acquire and interpret ultrasound images. Cognitive load measures included participant self-report, eye-based physiological indices, and behavioural measures. Data were analyzed using a multilevel linear modelling approach, wherein observations were clustered by participants. Experienced participants outperformed novice participants on ultrasound image acquisition. Ultrasound image interpretation was comparable between the two groups. Ultrasound image acquisition performance was predicted by level of training, prior ultrasound training, and cognitive load. There was significant convergence between cognitive load measurement techniques. A marginal model of ultrasound image acquisition performance including prior ultrasound training and cognitive load as fixed effects provided the best overall fit for the observed data. In this proof-of-principle study, the combination of demographic and cognitive load measures provided more sensitive metrics to predict ultrasound simulator performance. Performance assessments which include cognitive load can help differentiate between levels of expertise in simulation environments, and may serve as better predictors of skill transfer to clinical practice.
A Comparison of Web-Based and Face-to-Face Functional Measurement Experiments

ERIC Educational Resources Information Center

Van Acker, Frederik; Theuns, Peter

2010-01-01

Information Integration Theory (IIT) is concerned with how people combine information into an overall judgment. A method is hereby presented to perform Functional Measurement (FM) experiments, the methodological counterpart of IIT, on the Web. In a comparison of Web-based FM experiments, face-to-face experiments, and computer-based experiments in…
Are Performance-Based Accountability Systems Effective? Evidence from Five Sectors. Research Brief

ERIC Educational Resources Information Center

Leuschner, Kristin J.

2010-01-01

During the past two decades, performance-based accountability systems (PBASs), which link financial or other incentives to measured performance as a means of improving services, have gained popularity among policymakers. Although PBASs can vary widely across sectors, they share three main components: goals (i.e., one or more long-term outcomes to…
Motor Skill Assessment of Children: Is There an Association between Performance-Based, Child-Report, and Parent-Report Measures of Children's Motor Skills?

ERIC Educational Resources Information Center

Kennedy, Johanna; Brown, Ted; Chien, Chi-Wen

2012-01-01

Client-centered practice requires therapists to actively seek the perspectives of children and families. Several assessment tools are available to facilitate this process. However, when evaluating motor skill performance, therapists typically concentrate on performance-based assessment. To improve understanding of the information provided by the…
Development of GUI Type On-Line Condition Monitoring Program for a Turboprop Engine Using Labview

NASA Astrophysics Data System (ADS)

Kong, Changduk; Kim, Keonwoo

2011-12-01

Recently, an aero gas turbine health monitoring system has been developed for precaution and maintenance action against faults or performance degradations of the advanced propulsion system which occurs in severe environments such as high altitude, foreign object damage particles, hot and heavy rain and snowy atmospheric conditions. However to establish this health monitoring system, the online condition monitoring program is firstly required, and the program must monitor the engine performance trend through comparison between measured engine performance data and base performance results calculated by base engine performance model. This work aims to develop a GUI type on-line condition monitoring program for the PT6A-67 turboprop engine of a high altitude and long endurance operation UAV using LabVIEW. The base engine performance of the on-line condition monitoring program is simulated using component maps inversely generated from the limited performance deck data provided by engine manufacturer. The base engine performance simulation program is evaluated because analysis results by this program agree well with the performance deck data. The proposed on-line condition program can monitor the real engine performance as well as the trend through precise comparison between clean engine performance results calculated by the base performance simulation program and measured engine performance signals. In the development phase of this monitoring system, a signal generation module is proposed to evaluate the proposed online monitoring system. For user friendly purpose, all monitoring program are coded by LabVIEW, and monitoring examples are demonstrated using the proposed GUI type on-condition monitoring program.
48 CFR 2937.602 - Elements of performance-based contracting.

Code of Federal Regulations, 2010 CFR

2010-10-01

... objectively measurable incentives (e.g., Firm-Fixed-Price, Fixed-Price-Incentive-Fee, or Cost-Plus-Incentive-Fee) is appropriate. However, when contractor performance (e.g., cost control, schedule, or quality/technical) is best evaluated subjectively using qualitative measures, a Cost-Plus-Award-Fee contract may be...
A Whole-Tumor Histogram Analysis of Apparent Diffusion Coefficient Maps for Differentiating Thymic Carcinoma from Lymphoma.

PubMed

Zhang, Wei; Zhou, Yue; Xu, Xiao-Quan; Kong, Ling-Yan; Xu, Hai; Yu, Tong-Fu; Shi, Hai-Bin; Feng, Qing

2018-01-01

To assess the performance of a whole-tumor histogram analysis of apparent diffusion coefficient (ADC) maps in differentiating thymic carcinoma from lymphoma, and compare it with that of a commonly used hot-spot region-of-interest (ROI)-based ADC measurement. Diffusion weighted imaging data of 15 patients with thymic carcinoma and 13 patients with lymphoma were retrospectively collected and processed with a mono-exponential model. ADC measurements were performed by using a histogram-based and hot-spot-ROI-based approach. In the histogram-based approach, the following parameters were generated: mean ADC (ADC mean ), median ADC (ADC median ), 10th and 90th percentile of ADC (ADC 10 and ADC 90 ), kurtosis, and skewness. The difference in ADCs between thymic carcinoma and lymphoma was compared using a t test. Receiver operating characteristic analyses were conducted to determine and compare the differentiating performance of ADCs. Lymphoma demonstrated significantly lower ADC mean , ADC median , ADC 10 , ADC 90 , and hot-spot-ROI-based mean ADC than those found in thymic carcinoma (all p values < 0.05). There were no differences found in the kurtosis ( p = 0.412) and skewness ( p = 0.273). The ADC 10 demonstrated optimal differentiating performance (cut-off value, 0.403 × 10 -3 mm 2 /s; area under the receiver operating characteristic curve [AUC], 0.977; sensitivity, 92.3%; specificity, 93.3%), followed by the ADC mean , ADC median , ADC 90 , and hot-spot-ROI-based mean ADC. The AUC of ADC 10 was significantly higher than that of the hot spot ROI based ADC (0.977 vs. 0.797, p = 0.036). Compared with the commonly used hot spot ROI based ADC measurement, a histogram analysis of ADC maps can improve the differentiating performance between thymic carcinoma and lymphoma.
48 CFR 37.602 - Performance work statement.

Code of Federal Regulations, 2010 CFR

2010-10-01

... on the use of measurable performance standards and financial incentives in a competitive environment... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Performance work statement... CATEGORIES OF CONTRACTING SERVICE CONTRACTING Performance-Based Acquisition 37.602 Performance work statement...
Mobile CARS - IRS Instrument for Simultaneous Spectroscopic Measurement of Multiple Properties in Gaseous Flows

NASA Technical Reports Server (NTRS)

Bivolaru, Daniel; Lee, Joseph W.; Jones, Stephen B.; Tedder, Sarah A.; Danehy, Paul M.; Weikl, M. C.; Magnotti, G.; Cutler, Andrew D.

2007-01-01

This paper describes a measurement system based on the dual-pump coherent anti-Stokes Raman spectroscopy (CARS) and interferometric Rayleigh scattering (IRS) methods. The IRS measurement is performed simultaneously with the CARS measurement using a common green laser beam as a narrow-band light source. The mobile CARS-IRS instrument is designed for the use both in laboratories as well as in ground-based combustion test facilities. Furthermore, it is designed to be easily transported between laboratory and test facility. It performs single-point spatially and temporally resolved simultaneous measurements of temperature, species mole fraction of N2, O2, and H2, and two-components of velocity. A mobile laser system can be placed inside or outside the test facility, while a beam receiving and monitoring system is placed near the measurement location. Measurements in a laboratory small-scale Mach 1.6 H2-air combustion-heated supersonic jet were performed to test the capability of the system. Final setup and pretests of a larger scale reacting jet are ongoing at NASA Langley Research Center s Direct Connect Supersonic Combustor Test Facility (DCSCTF).
Cyst-based measurements for assessing lymphangioleiomyomatosis in computed tomography

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lo, P., E-mail: pechinlo@mednet.edu.ucla; Brown, M. S.; Kim, H.

Purpose: To investigate the efficacy of a new family of measurements made on individual pulmonary cysts extracted from computed tomography (CT) for assessing the severity of lymphangioleiomyomatosis (LAM). Methods: CT images were analyzed using thresholding to identify a cystic region of interest from chest CT of LAM patients. Individual cysts were then extracted from the cystic region by the watershed algorithm, which separates individual cysts based on subtle edges within the cystic regions. A family of measurements were then computed, which quantify the amount, distribution, and boundary appearance of the cysts. Sequential floating feature selection was used to select amore » small subset of features for quantification of the severity of LAM. Adjusted R{sup 2} from multiple linear regression and R{sup 2} from linear regression against measurements from spirometry were used to compare the performance of our proposed measurements with currently used density based CT measurements in the literature, namely, the relative area measure and the D measure. Results: Volumetric CT data, performed at total lung capacity and residual volume, from a total of 49 subjects enrolled in the MILES trial were used in our study. Our proposed measures had adjusted R{sup 2} ranging from 0.42 to 0.59 when regressing against the spirometry measures, with p < 0.05. For previously used density based CT measurements in the literature, the best R{sup 2} was 0.46 (for only one instance), with the majority being lower than 0.3 or p > 0.05. Conclusions: The proposed family of CT-based cyst measurements have better correlation with spirometric measures than previously used density based CT measurements. They show potential as a sensitive tool for quantitatively assessing the severity of LAM.« less
Towards Ontology as Knowledge Representation for Intellectual Capital Measurement

NASA Astrophysics Data System (ADS)

Zadjabbari, B.; Wongthongtham, P.; Dillon, T. S.

For many years, physical asset indicators were the main evidence of an organization’s successful performance. However, the situation has changed after information technology revolution in the knowledge-based economy. Since 1980’s business performance has not been limited only to physical assets instead intellectual capital are increasingly playing a major role in business performance. In this paper, we utilize ontology as a tool for knowledge representation in the domain of intellectual capital measurement. The ontology classifies ways of intangible capital measurement.
Reliability and sources of variation of the ABILHAND-Kids questionnaire in children with cerebral palsy.

PubMed

de Jong, Lex D; van Meeteren, Annemiek; Emmelot, Cornelis H; Land, Nanne E; Dijkstra, Pieter U

2018-03-01

To determine reliability of the ABILHAND-Kids, explore sources of variation associated with these measurement results, and generate repeatability coefficients. A reliability study with a repeated measures design was performed in an ambulatory rehabilitation care department from a rehabilitation center, and a center for special education. A physician, an occupational therapist, and parents of 27 children with spastic cerebral palsy independently rated the children's manual capacity when performing 21 standardized tasks of the ABILHAND-Kids from video recordings twice with a three week time interval (27 first-, and 25 second video recordings available). Parents additionally rated their children's performance based on their own perception of their child's ability to perform manual activities in everyday life, resulting in eight ratings per child. ABILHAND-Kids ratings were systematically different between observers, sessions, and rating method. Participant × observer interaction (66%) and residual variance (20%) contributed the most to error variance (9%). Test-retest reliability was 0.92. Repeatability coefficients (between 0.81 and 1.82 logit points) were largest for the parents' performance-based ratings. ABILHAND-Kids scores can be reliably used as a performance- and capacity-based rating method across different raters. Parents' performance-based ratings are less reliable than their capacity-based ratings. Resulting repeatability coefficients can be used to interpret ABILHAND-Kids ratings with more confidence. Implications for Rehabilitation The ABILHAND-Kids is a valuable tool to assess a child's unimanual and bimanual upper limb activities. The reliability of the ABILHANDS-Kids is good across different observers as a performance- and capacity-based rating method. Parents' performance-based ratings are less reliable than their capacity-based ones. This study has generated repeatability coefficients for clinical decision making.
Access to Care Under Physician Payment Reform: A Physician-Based Analysis

PubMed Central

Meadow, Ann

1995-01-01

This article reports physician-based measures of access to care during the 3 years surrounding the 1989 physician payment reforms. Analysis was facilitated by a new system of physician identifiers in Medicare claims. Access measures include caseload per physician and related measures of the demographic composition of physicians' clientele, the proportion of physicians performing surgical and other procedures, and the assignment rate. The caseload and assignment measures were stable or improving over time, suggesting that reforms did not harm access. Procedure performance rates tended to decline between 1992 and 1993, but reductions were inversely related to the estimated fee changes, and several may be explainable by other factors. PMID:10172615

Other ways of measuring `Big G'

NASA Astrophysics Data System (ADS)

Rothleitner, Christian

2016-03-01

In 1798, the British scientist Henry Cavendish performed the first laboratory experiment to determine the gravitational force between two massive bodies. From his result, Newton's gravitational constant, G, was calculated. Cavendish's measurement principle was the torsion balance invented by John Michell some 15 years before. During the following two centuries, more than 300 new measurements followed. Although technology - and physics - developed rapidly during this time, surprisingly, most experiments were still based on the same principle. In fact, the most accurate determination of G to date is a measurement based on the torsion balance principle. Despite the fact that G was one of the first fundamental physical constants ever measured, and despite the huge number of experiments performed on it to this day, its CODATA recommended value still has the highest standard measurement uncertainty when compared to other fundamental physical constants. Even more serious is the fact that even measurements based on the same principle often do not overlap within their attributed standard uncertainties. It must be assumed that various experiments are subject to one or more unknown biases. In this talk I will present some alternative experimental setups to the torsion balance which have been performed or proposed to measure G. Although their estimated uncertainties are often higher than most torsion balance experiments, revisiting such ideas is worthwhile. Advances in technology could offer solutions to problems which were previously insurmountable, these solutions could result in lower measurement uncertainties. New measurement principles could also help to uncover hidden systematic effects.
Accuracy optimization with wavelength tunability in overlay imaging technology

NASA Astrophysics Data System (ADS)

Lee, Honggoo; Kang, Yoonshik; Han, Sangjoon; Shim, Kyuchan; Hong, Minhyung; Kim, Seungyoung; Lee, Jieun; Lee, Dongyoung; Oh, Eungryong; Choi, Ahlin; Kim, Youngsik; Marciano, Tal; Klein, Dana; Hajaj, Eitan M.; Aharon, Sharon; Ben-Dov, Guy; Lilach, Saltoun; Serero, Dan; Golotsvan, Anna

2018-03-01

As semiconductor manufacturing technology progresses and the dimensions of integrated circuit elements shrink, overlay budget is accordingly being reduced. Overlay budget closely approaches the scale of measurement inaccuracies due to both optical imperfections of the measurement system and the interaction of light with geometrical asymmetries of the measured targets. Measurement inaccuracies can no longer be ignored due to their significant effect on the resulting device yield. In this paper we investigate a new approach for imaging based overlay (IBO) measurements by optimizing accuracy rather than contrast precision, including its effect over the total target performance, using wavelength tunable overlay imaging metrology. We present new accuracy metrics based on theoretical development and present their quality in identifying the measurement accuracy when compared to CD-SEM overlay measurements. The paper presents the theoretical considerations and simulation work, as well as measurement data, for which tunability combined with the new accuracy metrics is shown to improve accuracy performance.
VR-simulation cataract surgery in non-experienced trainees: evolution of surgical skill

NASA Astrophysics Data System (ADS)

Söderberg, Per; Erngrund, Markus; Skarman, Eva; Nordh, Leif; Laurell, Carl-Gustaf

2011-03-01

Conclusion: The current data imply that the performance index as defined herein is a valid measure of the performance of a trainee using the virtual reality phacoemulsification simulator. Further, the performance index increase linearly with measurement cycles for less than five measurement cycles. To fully use the learning potential of the simulator more than four measurement cycles are required. Materials and methods: Altogether, 10 trainees were introduced to the simulator by an instructor and then performed a training program including four measurement cycles with three iterated measurements of the simulation at the end of each cycle. The simulation characteristics was standardized and defined in 14 parameters. The simulation was measured separately for the sculpting phase in 21 variables, and for the evacuation phase in 22 variables. A performance index based on all measured variables was estimated for the sculpting phase and the evacuation phase, respectively, for each measurement and the three measurements for each cycle were averaged. Finally, the performance as a function of measurement cycle was estimated for each trainee with regression, assuming a straight line. The estimated intercept and inclination coefficients, respectively, were finally averaged for all trainees. Results: The performance increased linearly with the number of measurement cycles both for the sculpting and for the evacuation phase.
A Varian DynaLog file-based procedure for patient dose-volume histogram-based IMRT QA.

PubMed

Calvo-Ortega, Juan F; Teke, Tony; Moragues, Sandra; Pozo, Miquel; Casals-Farran, Joan

2014-03-06

In the present study, we describe a method based on the analysis of the dynamic MLC log files (DynaLog) generated by the controller of a Varian linear accelerator in order to perform patient-specific IMRT QA. The DynaLog files of a Varian Millennium MLC, recorded during an IMRT treatment, can be processed using a MATLAB-based code in order to generate the actual fluence for each beam and so recalculate the actual patient dose distribution using the Eclipse treatment planning system. The accuracy of the DynaLog-based dose reconstruction procedure was assessed by introducing ten intended errors to perturb the fluence of the beams of a reference plan such that ten subsequent erroneous plans were generated. In-phantom measurements with an ionization chamber (ion chamber) and planar dose measurements using an EPID system were performed to investigate the correlation between the measured dose changes and the expected ones detected by the reconstructed plans for the ten intended erroneous cases. Moreover, the method was applied to 20 cases of clinical plans for different locations (prostate, lung, breast, and head and neck). A dose-volume histogram (DVH) metric was used to evaluate the impact of the delivery errors in terms of dose to the patient. The ionometric measurements revealed a significant positive correlation (R² = 0.9993) between the variations of the dose induced in the erroneous plans with respect to the reference plan and the corresponding changes indicated by the DynaLog-based reconstructed plans. The EPID measurements showed that the accuracy of the DynaLog-based method to reconstruct the beam fluence was comparable with the dosimetric resolution of the portal dosimetry used in this work (3%/3 mm). The DynaLog-based reconstruction method described in this study is a suitable tool to perform a patient-specific IMRT QA. This method allows us to perform patient-specific IMRT QA by evaluating the result based on the DVH metric of the planning CT image (patient DVH-based IMRT QA).
Benchmarking: your performance measurement and improvement tool.

PubMed

Senn, G F

2000-01-01

Many respected professional healthcare organizations and societies today are seeking to establish data-driven performance measurement strategies such as benchmarking. Clinicians are, however, resistant to "benchmarking" that is based on financial data alone, concerned that it may be adverse to the patients' best interests. Benchmarking of clinical procedures that uses physician's codes such as Current Procedural Terminology (CPTs) has greater credibility with practitioners. Better Performers, organizations that can perform procedures successfully at lower cost and in less time, become the "benchmark" against which other organizations can measure themselves. The Better Performers' strategies can be adopted by other facilities to save time or money while maintaining quality patient care.
Wavelet-based multiscale performance analysis: An approach to assess and improve hydrological models

NASA Astrophysics Data System (ADS)

Rathinasamy, Maheswaran; Khosa, Rakesh; Adamowski, Jan; ch, Sudheer; Partheepan, G.; Anand, Jatin; Narsimlu, Boini

2014-12-01

The temporal dynamics of hydrological processes are spread across different time scales and, as such, the performance of hydrological models cannot be estimated reliably from global performance measures that assign a single number to the fit of a simulated time series to an observed reference series. Accordingly, it is important to analyze model performance at different time scales. Wavelets have been used extensively in the area of hydrological modeling for multiscale analysis, and have been shown to be very reliable and useful in understanding dynamics across time scales and as these evolve in time. In this paper, a wavelet-based multiscale performance measure for hydrological models is proposed and tested (i.e., Multiscale Nash-Sutcliffe Criteria and Multiscale Normalized Root Mean Square Error). The main advantage of this method is that it provides a quantitative measure of model performance across different time scales. In the proposed approach, model and observed time series are decomposed using the Discrete Wavelet Transform (known as the à trous wavelet transform), and performance measures of the model are obtained at each time scale. The applicability of the proposed method was explored using various case studies-both real as well as synthetic. The synthetic case studies included various kinds of errors (e.g., timing error, under and over prediction of high and low flows) in outputs from a hydrologic model. The real time case studies investigated in this study included simulation results of both the process-based Soil Water Assessment Tool (SWAT) model, as well as statistical models, namely the Coupled Wavelet-Volterra (WVC), Artificial Neural Network (ANN), and Auto Regressive Moving Average (ARMA) methods. For the SWAT model, data from Wainganga and Sind Basin (India) were used, while for the Wavelet Volterra, ANN and ARMA models, data from the Cauvery River Basin (India) and Fraser River (Canada) were used. The study also explored the effect of the choice of the wavelets in multiscale model evaluation. It was found that the proposed wavelet-based performance measures, namely the MNSC (Multiscale Nash-Sutcliffe Criteria) and MNRMSE (Multiscale Normalized Root Mean Square Error), are a more reliable measure than traditional performance measures such as the Nash-Sutcliffe Criteria (NSC), Root Mean Square Error (RMSE), and Normalized Root Mean Square Error (NRMSE). Further, the proposed methodology can be used to: i) compare different hydrological models (both physical and statistical models), and ii) help in model calibration.
Governing Healthcare through Performance Measurement in Massachusetts and the Netherlands

PubMed Central

Van der Wees, Philip J.; der Sanden, Maria W.G. Nijhuis-van; van Ginneken, Ewout; Ayanian, John Z.; Schneider, Eric C.; Westert, Gert P.

2016-01-01

Massachusetts and the Netherlands have implemented comprehensive health reforms, which have heightened the importance of performance measurement. The performance measures addressing access to health care and patient experience are similar in the two jurisdictions, but measures of processes and outcomes of care differ considerably. In both jurisdictions, the use of health outcomes to compare the quality of health care organizations is limited, and specific information about costs is lacking. New legislation in both jurisdictions led to the establishment of institutes to monitor the quality of care, similar mandates to make the performance of health care providers transparent, and to establish a shared responsibility of providers, consumers and insurers to improve the quality of health care. In Massachusetts a statewide mandatory quality measure set was established to monitor the quality of care. The Netherlands is stimulating development of performance measures by providers based on a mandatory framework for developing such measures. Both jurisdictions are expanding the use of patient-reported outcomes to support patient care, quality improvement, and performance comparisons with the aim of explicitly linking performance to new payment incentives. PMID:24138729
UV Lidar Receiver Analysis for Tropospheric Sensing of Ozone

NASA Technical Reports Server (NTRS)

Pliutau, Denis; DeYoung, Russell J.

2013-01-01

A simulation of a ground based Ultra-Violet Differential Absorption Lidar (UV-DIAL) receiver system was performed under realistic daytime conditions to understand how range and lidar performance can be improved for a given UV pulse laser energy. Calculations were also performed for an aerosol channel transmitting at 3 W. The lidar receiver simulation studies were optimized for the purpose of tropospheric ozone measurements. The transmitted lidar UV measurements were from 285 to 295 nm and the aerosol channel was 527-nm. The calculations are based on atmospheric transmission given by the HITRAN database and the Modern Era Retrospective Analysis for Research and Applications (MERRA) meteorological data. The aerosol attenuation is estimated using both the BACKSCAT 4.0 code as well as data collected during the CALIPSO mission. The lidar performance is estimated for both diffuseirradiance free cases corresponding to nighttime operation as well as the daytime diffuse scattered radiation component based on previously reported experimental data. This analysis presets calculations of the UV-DIAL receiver ozone and aerosol measurement range as a function of sky irradiance, filter bandwidth and laser transmitted UV and 527-nm energy
Linear Acceleration Measurement Utilizing Inter-Instrument Synchronization: A Comparison between Accelerometers and Motion-Based Tracking Approaches

ERIC Educational Resources Information Center

Callaway, Andrew J.; Cobb, Jon E.

2012-01-01

Where as video cameras are a reliable and established technology for the measurement of kinematic parameters, accelerometers are increasingly being employed for this type of measurement due to their ease of use, performance, and comparatively low cost. However, the majority of accelerometer-based studies involve a single channel due to the…
Performance-based tests versus behavioral ratings in the assessment of executive functioning in preschoolers: associations with ADHD symptoms and reading achievement.

PubMed

Miranda, Ana; Colomer, Carla; Mercader, Jessica; Fernández, M Inmaculada; Presentación, M Jesús

2015-01-01

The early assessment of the executive processes using ecologically valid instruments is essential for identifying deficits and planning actions to deal with possible adverse consequences. The present study has two different objectives. The first objective is to analyze the relationship between preschoolers' performance on tests of Working Memory and Inhibition and parents' and teachers' ratings of these executive functions (EFs) using the Behavior Rating Inventory of Executive Function (BRIEF). The second objective consists of studying the predictive value of the different EF measures (performance-based test and rating scales) on Inattention and Hyperactivity/Impulsivity behaviors and on indicators of word reading performance. The participants in the study were 209 children in the last year of preschool, their teachers and their families. Performance-based tests of Working Memory and Inhibition were administered, as well as word reading measures (accuracy and speed). The parents and teachers filled out rating scales of the EF and typical behaviors of attention deficit hyperactivity disorder (ADHD) symptomatology. Moderate correlation values were found between the different EF assessments procedures, although the results varied depending on the different domains. Metacognition Index from the BRIEF presented stronger correlations with verbal working memory tests than with inhibition tests. Both the rating scales and the performance-based tests were significant predictors of Inattention and Hyperactivity/Impulsivity behaviors and the reading achievement measures. However, the BRIEF explained a greater percentage of variance in the case of the ADHD symptomatology, while the performance-based tests explained reading achievement to a greater degree. The implications of the findings for research and clinical practice are discussed.
Performance-based tests versus behavioral ratings in the assessment of executive functioning in preschoolers: associations with ADHD symptoms and reading achievement

PubMed Central

Miranda, Ana; Colomer, Carla; Mercader, Jessica; Fernández, M. Inmaculada; Presentación, M. Jesús

2015-01-01

The early assessment of the executive processes using ecologically valid instruments is essential for identifying deficits and planning actions to deal with possible adverse consequences. The present study has two different objectives. The first objective is to analyze the relationship between preschoolers’ performance on tests of Working Memory and Inhibition and parents’ and teachers’ ratings of these executive functions (EFs) using the Behavior Rating Inventory of Executive Function (BRIEF). The second objective consists of studying the predictive value of the different EF measures (performance-based test and rating scales) on Inattention and Hyperactivity/Impulsivity behaviors and on indicators of word reading performance. The participants in the study were 209 children in the last year of preschool, their teachers and their families. Performance-based tests of Working Memory and Inhibition were administered, as well as word reading measures (accuracy and speed). The parents and teachers filled out rating scales of the EF and typical behaviors of attention deficit hyperactivity disorder (ADHD) symptomatology. Moderate correlation values were found between the different EF assessments procedures, although the results varied depending on the different domains. Metacognition Index from the BRIEF presented stronger correlations with verbal working memory tests than with inhibition tests. Both the rating scales and the performance-based tests were significant predictors of Inattention and Hyperactivity/Impulsivity behaviors and the reading achievement measures. However, the BRIEF explained a greater percentage of variance in the case of the ADHD symptomatology, while the performance-based tests explained reading achievement to a greater degree. The implications of the findings for research and clinical practice are discussed. PMID:25972833
Performance enhancement of low-cost, high-accuracy, state estimation for vehicle collision prevention system using ANFIS

NASA Astrophysics Data System (ADS)

Saadeddin, Kamal; Abdel-Hafez, Mamoun F.; Jaradat, Mohammad A.; Jarrah, Mohammad Amin

2013-12-01

In this paper, a low-cost navigation system that fuses the measurements of the inertial navigation system (INS) and the global positioning system (GPS) receiver is developed. First, the system's dynamics are obtained based on a vehicle's kinematic model. Second, the INS and GPS measurements are fused using an extended Kalman filter (EKF) approach. Subsequently, an artificial intelligence based approach for the fusion of INS/GPS measurements is developed based on an Input-Delayed Adaptive Neuro-Fuzzy Inference System (IDANFIS). Experimental tests are conducted to demonstrate the performance of the two sensor fusion approaches. It is found that the use of the proposed IDANFIS approach achieves a reduction in the integration development time and an improvement in the estimation accuracy of the vehicle's position and velocity compared to the EKF based approach.
Active learning for noisy oracle via density power divergence.

PubMed

Sogawa, Yasuhiro; Ueno, Tsuyoshi; Kawahara, Yoshinobu; Washio, Takashi

2013-10-01

The accuracy of active learning is critically influenced by the existence of noisy labels given by a noisy oracle. In this paper, we propose a novel pool-based active learning framework through robust measures based on density power divergence. By minimizing density power divergence, such as β-divergence and γ-divergence, one can estimate the model accurately even under the existence of noisy labels within data. Accordingly, we develop query selecting measures for pool-based active learning using these divergences. In addition, we propose an evaluation scheme for these measures based on asymptotic statistical analyses, which enables us to perform active learning by evaluating an estimation error directly. Experiments with benchmark datasets and real-world image datasets show that our active learning scheme performs better than several baseline methods. Copyright © 2013 Elsevier Ltd. All rights reserved.
Combined aerobic and resistance exercise program improves task performance in patients with heart failure.

PubMed

Gary, Rebecca A; Cress, M Elaine; Higgins, Melinda K; Smith, Andrew L; Dunbar, Sandra B

2011-09-01

To assess the effects of a home-based aerobic and resistance training program on the physical function of adults with New York Heart Association (NYHA) class II and III patients and systolic heart failure (HF). Randomized controlled trial. Home based. Stable patients (N=24; mean age, 60 ± 10 y; left ventricular ejection fraction, 25% ± 9%; 50% white; 50% women) with New York Heart Association (NYHA) classes II and III (NYHA class III, 58%) systolic heart failure (HF). A 12-week progressive home-based program of moderate-intensity aerobic and resistance exercise. Attention control wait list participants performed light stretching and flexibility exercises. A 10-item performance-based physical function measure, the Continuous Scale Physical Functional Performance test (CS-PFP10), was the major outcome variable and included specific physical activities measured in time to complete a task, weight carried during a task, and distance walked. Other measures included muscle strength, HRQOL (Minnesota Living With Heart Failure Questionnaire, Epworth Sleepiness Scale), functional capacity (Duke Activity Status Index), and disease severity (brain natriuretic peptide) levels. After the exercise intervention, 9 of 10 specific task activities were performed more rapidly, with increased weight carried by exercise participants compared with the attention control wait list group. Exercise participants also showed significant improvements in CS-PFP10 total score (P<.025), upper and lower muscle strength, and HRQOL (P<.001) compared with the attention control wait list group. Adherence rates were 83% and 99% for the aerobic and resistance training, respectively. Patients with stable HF who participate in a moderate-intensity combined aerobic and resistance exercise program may improve performance of routine physical activities of daily living by using a home-based exercise approach. Performance-based measures such as the CS-PFP10 may provide additional insights into physical function in patients with HF that more commonly used exercise tests may not identify. Early detection of subtle changes that may signal declining physical function that are amenable to intervention potentially may slow further loss of function in this patient population. Copyright © 2011 American Congress of Rehabilitation Medicine. Published by Elsevier Inc. All rights reserved.
Higs-instrument: design and demonstration of a high performance gas concentration imager

NASA Astrophysics Data System (ADS)

Verlaan, A. L.; Klop, W. A.; Visser, H.; van Brug, H.; Human, J.

2017-09-01

Climate change and environmental conditions are high on the political agenda of international governments. Laws and regulations are being setup all around the world to improve the air quality and to reduce the impact. The growth of a number of trace gasses, including CO2, Methane and NOx are especially interesting due to their environmental impact. The regulations made are being based on both models and measurements of the trend of those trace gases over the years. Now the regulations are in place also enforcement and therewith measurements become more and more important. Instruments enabling high spectral and spatial resolution as well as high accurate measurements of trace gases are required to deliver the necessary inputs. Nowadays those measurements are usually performed by space based spectrometers. The requirement for high spectral resolution and measurement accuracy significantly increases the size of the instruments. As a result the instrument and satellite becomes very expensive to develop and to launch. Specialized instruments with a small volume and the required performance will offer significant advantages in both cost and performance. Huib's Innovative Gas Sensor (HIGS, named after its inventor Huib Visser), currently being developed at TNO is an instrument that achieves exactly that. Designed to measure only a single gas concentration, opposed to deriving it from a spectrum, it achieves high performance within a small design volume. The instrument enables instantaneous imaging of the gas distribution of the selected gas. An instrument demonstrator has been developed for NO2 detection. Laboratory measurements proved the measurement technique to be successful. An on-sky measurement campaign is in preparation. This paper addresses both the instrument design as well as the demonstrated performances.
Exploring the potential of analysing visual search behaviour data using FROC (free-response receiver operating characteristic) method: an initial study

NASA Astrophysics Data System (ADS)

Dong, Leng; Chen, Yan; Dias, Sarah; Stone, William; Dias, Joseph; Rout, John; Gale, Alastair G.

2017-03-01

Visual search techniques and FROC analysis have been widely used in radiology to understand medical image perceptual behaviour and diagnostic performance. The potential of exploiting the advantages of both methodologies is of great interest to medical researchers. In this study, eye tracking data of eight dental practitioners was investigated. The visual search measures and their analyses are considered here. Each participant interpreted 20 dental radiographs which were chosen by an expert dental radiologist. Various eye movement measurements were obtained based on image area of interest (AOI) information. FROC analysis was then carried out by using these eye movement measurements as a direct input source. The performance of FROC methods using different input parameters was tested. The results showed that there were significant differences in FROC measures, based on eye movement data, between groups with different experience levels. Namely, the area under the curve (AUC) score evidenced higher values for experienced group for the measurements of fixation and dwell time. Also, positive correlations were found for AUC scores between the eye movement data conducted FROC and rating based FROC. FROC analysis using eye movement measurements as input variables can act as a potential performance indicator to deliver assessment in medical imaging interpretation and assess training procedures. Visual search data analyses lead to new ways of combining eye movement data and FROC methods to provide an alternative dimension to assess performance and visual search behaviour in the area of medical imaging perceptual tasks.
PERFORMANCE-BASED CONTRACTING IN CONSTRUCTION PHASE AND MAINTENANCE PHASE OF PAVEMENT

NASA Astrophysics Data System (ADS)

Yoshida, Takeshi

Performance-based contracting for pavement in Japan started as performance warranties in construction phase, in 1999. Recently, road agencies have recognized the applicability of this type of contracting in outsourcing of maintenance activities. The objectives of this study are to clarify the issues of performance specifying in construction phase and maintenance phase of pavement, and to propose measures to be taken. This paper, with the recognition that the life of each pavement depends on performance standards for various attributes, reviews domestic and foreign examples of performance-based contracting. A performance standard based on the average of current practices can enhance product quality and service life with a warranty contract. Repair thresholds and response time for each deficiency should be considered as performance standards in maintenance phase.
45 CFR 2522.700 - How does evaluation differ from performance measurement?

Code of Federal Regulations, 2010 CFR

2010-10-01

... progress, evaluation uses scientifically-based research methods to assess the effectiveness of programs by... the reading ability of students in a program over time to a similar group of students not... example, a performance measure for a literacy program may include the percentage of students receiving...
76 FR 31339 - Agency Information Collection Activities: Submission for OMB Review; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-31

... extension of the currently approved tool for the collection of ambulatory care clinical performance measure...: Medicare Demonstration Ambulatory Care Quality Measure Performance Assessment Tool (``PAT''); Use: This... based system. This system will also provide a platform for developing tools to collect clinical quality...
Assessing Minimum Competencies of Beginning Teachers: Instrumentation, Measurement Issues, Legal Concerns.

ERIC Educational Resources Information Center

Ellett, Chad D.

An overview is presented of a performance-based assessment system, Teacher Performance Assessment Instruments (TPAI), developed by the Teacher Assessment Project at the University of Georgia to measure competencies of beginning teachers for initial professional certification. To clearly separate the preparation and certification functions within…

Fiber-Based, Trace-Gas, Laser Transmitter Technology Development for Space

NASA Technical Reports Server (NTRS)

Stephen, Mark; Yu, Anthony; Chen, Jeffrey; Nicholson, Jeffrey; Engin, Doruk; Mathason, Brian; Wu, Stewart; Allan, Graham; Hasselbrack, William; Gonzalez, Brayler;

2015-01-01

NASA’s Goddard Space Flight Center (GSFC) is working on maturing the technology readiness of a laser transmitter designed for use in atmospheric CO2 remote-sensing. GSFC has been developing an airplane-based CO2 lidar instrument over several years to demonstrate the efficacy of the instrumentation and measurement technique and to link the science models to the instrument performance. The ultimate goal is to make space-based satellite measurements with global coverage. In order to accomplish this, we must demonstrate the technology readiness and performance of the components as well as demonstrate the required power-scaling to make the link with the required signal-to-noise-ratio (SNR). To date, all the instrument components have been shown to have the required performance with the exception of the laser transmitter.In this program we are working on a fiber-based master oscillator power amplifier (MOPA) laser transmitter architecture where we will develop a ruggedized package and perform the relevant environmental tests to demonstrate TRL-6. In this paper we will review our transmitter architecture and progress on the performance and packaging of the laser transmitter.

Fiber-based, trace-gas, laser transmitter technology development for space

NASA Astrophysics Data System (ADS)

Stephen, Mark; Yu, Anthony; Chen, Jeffrey; Nicholson, Jeffrey; Engin, Doruk; Mathason, Brian; Wu, Stewart; Allan, Graham; Hasselbrack, William; Gonzales, Brayler; Han, Lawrence; Numata, Kenji; Storm, Mark; Abshire, James

2015-09-01

NASA's Goddard Space Flight Center (GSFC) is working on maturing the technology readiness of a laser transmitter designed for use in atmospheric CO2 remote-sensing. GSFC has been developing an airplane-based CO2 lidar instrument over several years to demonstrate the efficacy of the instrumentation and measurement technique and to link the science models to the instrument performance. The ultimate goal is to make space-based satellite measurements with global coverage. In order to accomplish this, we must demonstrate the technology readiness and performance of the components as well as demonstrate the required power-scaling to make the link with the required signal-to-noise-ratio (SNR). To date, all the instrument components have been shown to have the required performance with the exception of the laser transmitter. In this program we are working on a fiber-based master oscillator power amplifier (MOPA) laser transmitter architecture where we will develop a ruggedized package and perform the relevant environmental tests to demonstrate TRL-6. In this paper we will review our transmitter architecture and progress on the performance and packaging of the laser transmitter.
A Systematic Understanding of Successful Web Searches in Information-Based Tasks

ERIC Educational Resources Information Center

Zhou, Mingming

2013-01-01

The purpose of this study is to research how Chinese university students solve information-based problems. With the Search Performance Index as the measure of search success, participants were divided into high, medium and low-performing groups. Based on their web search logs, these three groups were compared along five dimensions of the search…
Findings and Preliminary Recommendations from the Michigan State and Indiana University Research Study of Value-Added Models to Evaluate Teacher Performance

ERIC Educational Resources Information Center

Guarino, Cassandra M.

2013-01-01

The push for accountability in public schooling has extended to the measurement of teacher performance, accelerated by federal efforts through Race to the Top. Currently, a large number of states and districts across the country are computing measures of teacher performance based on the standardized test scores of their students and using them in…
Object-based and egocentric mental rotation performance in older adults: the importance of gender differences and motor ability.

PubMed

Jansen, Petra; Kaltner, Sandra

2014-01-01

In this study, mental rotation performance was assessed in both an object-based task, human figures and letters as stimuli, and in an egocentric-based task, a human figure as a stimulus, in 60 older persons between 60 and 71 years old (30 women, 30 men). Additionally all participants completed three motor tests measuring balance and mobility. The results show that the reaction time was slower for letters than for both human figure tasks and the mental rotation speed was faster over all for egocentric mental rotation tasks. Gender differences were found in the accuracy measurement, favoring males, and were independent of stimulus type, kind of transformation, and angular disparity. Furthermore, a regression analysis showed that the accuracy rate for object-based transformations with body stimuli could be predicted by gender and balance ability. This study showed that the mental rotation performance in older adults depends on stimulus type, kind of transformation, and gender and that performance partially relates to motor ability.
Performance measures for a dialysis setting.

PubMed

Gu, Xiuzhu; Itoh, Kenji

2018-03-01

This study from Japan extracted performance measures for dialysis unit management and investigated their characteristics from professional views. Two surveys were conducted using self-administered questionnaires, in which dialysis managers/staff were asked to rate the usefulness of 44 performance indicators. A total of 255 managers and 2,097 staff responded. Eight performance measures were elicited from dialysis manager and staff responses: these were safety, operational efficiency, quality of working life, financial effectiveness, employee development, mortality, patient/employee satisfaction and patient-centred health care. These performance measures were almost compatible with those extracted in overall healthcare settings in a previous study. Internal reliability, content and construct validity of the performance measures for the dialysis setting were ensured to some extent. As a general trend, both dialysis managers and staff perceived performance measures as highly useful, especially for safety, mortality, operational efficiency and patient/employee satisfaction, but showed relatively low concerns for patient-centred health care and employee development. However, dialysis managers' usefulness perceptions were significantly higher than staff. Important guidelines for designing a holistic hospital/clinic management system were yielded. Performance measures must be balanced for outcomes and performance shaping factors (PSF); a common set of performance measures could be applied to all the healthcare settings, although performance indicators of each measure should be composed based on the application field and setting; in addition, sound causal relationships between PSF and outcome measures/indicators should be explored for further improvement. © 2017 European Dialysis and Transplant Nurses Association/European Renal Care Association.
Antenna Calibration and Measurement Equipment

NASA Technical Reports Server (NTRS)

Rochblatt, David J.; Cortes, Manuel Vazquez

2012-01-01

A document describes the Antenna Calibration & Measurement Equipment (ACME) system that will provide the Deep Space Network (DSN) with instrumentation enabling a trained RF engineer at each complex to perform antenna calibration measurements and to generate antenna calibration data. This data includes continuous-scan auto-bore-based data acquisition with all-sky data gathering in support of 4th order pointing model generation requirements. Other data includes antenna subreflector focus, system noise temperature and tipping curves, antenna efficiency, reports system linearity, and instrument calibration. The ACME system design is based on the on-the-fly (OTF) mapping technique and architecture. ACME has contributed to the improved RF performance of the DSN by approximately a factor of two. It improved the pointing performances of the DSN antennas and productivity of its personnel and calibration engineers.
Performance analysis of Supply Chain Management with Supply Chain Operation reference model

NASA Astrophysics Data System (ADS)

Hasibuan, Abdurrozzaq; Arfah, Mahrani; Parinduri, Luthfi; Hernawati, Tri; Suliawati; Harahap, Bonar; Rahmah Sibuea, Siti; Krianto Sulaiman, Oris; purwadi, Adi

2018-04-01

This research was conducted at PT. Shamrock Manufacturing Corpora, the company is required to think creatively to implement competition strategy by producing goods/services that are more qualified, cheaper. Therefore, it is necessary to measure the performance of Supply Chain Management in order to improve the competitiveness. Therefore, the company is required to optimize its production output to meet the export quality standard. This research begins with the creation of initial dimensions based on Supply Chain Management process, ie Plan, Source, Make, Delivery, and Return with hierarchy based on Supply Chain Reference Operation that is Reliability, Responsiveness, Agility, Cost, and Asset. Key Performance Indicator identification becomes a benchmark in performance measurement whereas Snorm De Boer normalization serves to equalize Key Performance Indicator value. Analiytical Hierarchy Process is done to assist in determining priority criteria. Measurement of Supply Chain Management performance at PT. Shamrock Manufacturing Corpora produces SC. Responsiveness (0.649) has higher weight (priority) than other alternatives. The result of performance analysis using Supply Chain Reference Operation model of Supply Chain Management performance at PT. Shamrock Manufacturing Corpora looks good because its monitoring system between 50-100 is good.
Performance evaluation of an agent-based occupancy simulation model

DOE PAGES

Luo, Xuan; Lam, Khee Poh; Chen, Yixing; ...

2017-01-17

Occupancy is an important factor driving building performance. Static and homogeneous occupant schedules, commonly used in building performance simulation, contribute to issues such as performance gaps between simulated and measured energy use in buildings. Stochastic occupancy models have been recently developed and applied to better represent spatial and temporal diversity of occupants in buildings. However, there is very limited evaluation of the usability and accuracy of these models. This study used measured occupancy data from a real office building to evaluate the performance of an agent-based occupancy simulation model: the Occupancy Simulator. The occupancy patterns of various occupant types weremore » first derived from the measured occupant schedule data using statistical analysis. Then the performance of the simulation model was evaluated and verified based on (1) whether the distribution of observed occupancy behavior patterns follows the theoretical ones included in the Occupancy Simulator, and (2) whether the simulator can reproduce a variety of occupancy patterns accurately. Results demonstrated the feasibility of applying the Occupancy Simulator to simulate a range of occupancy presence and movement behaviors for regular types of occupants in office buildings, and to generate stochastic occupant schedules at the room and individual occupant levels for building performance simulation. For future work, model validation is recommended, which includes collecting and using detailed interval occupancy data of all spaces in an office building to validate the simulated occupant schedules from the Occupancy Simulator.« less
Performance evaluation of an agent-based occupancy simulation model

DOE Office of Scientific and Technical Information (OSTI.GOV)

Luo, Xuan; Lam, Khee Poh; Chen, Yixing

Occupancy is an important factor driving building performance. Static and homogeneous occupant schedules, commonly used in building performance simulation, contribute to issues such as performance gaps between simulated and measured energy use in buildings. Stochastic occupancy models have been recently developed and applied to better represent spatial and temporal diversity of occupants in buildings. However, there is very limited evaluation of the usability and accuracy of these models. This study used measured occupancy data from a real office building to evaluate the performance of an agent-based occupancy simulation model: the Occupancy Simulator. The occupancy patterns of various occupant types weremore » first derived from the measured occupant schedule data using statistical analysis. Then the performance of the simulation model was evaluated and verified based on (1) whether the distribution of observed occupancy behavior patterns follows the theoretical ones included in the Occupancy Simulator, and (2) whether the simulator can reproduce a variety of occupancy patterns accurately. Results demonstrated the feasibility of applying the Occupancy Simulator to simulate a range of occupancy presence and movement behaviors for regular types of occupants in office buildings, and to generate stochastic occupant schedules at the room and individual occupant levels for building performance simulation. For future work, model validation is recommended, which includes collecting and using detailed interval occupancy data of all spaces in an office building to validate the simulated occupant schedules from the Occupancy Simulator.« less
Impact of an Activity-Based Program on Health, Quality of Life, and Occupational Performance of Women Diagnosed With Cancer.

PubMed

Maher, Colleen; Mendonca, Rochelle J

We evaluated the impact of a 1-wk activity program on the health, quality of life (QOL), and occupational performance of community-living women diagnosed with cancer. A one-group pretest-posttest repeated-measures design was used. Participants completed a functional health measure (36-Item Short Form Health Survey [SF-36]), a QOL measure (World Health Organization Quality of Life-Brief version [WHOQOL-BREF]), and an occupational performance and satisfaction measure (Canadian Occupational Performance Measure [COPM]) before and 6 wk after program completion. The COPM was also administered on Day 5. Paired t tests for the SF-36 and WHOQOL-BREF showed no significant differences, except for the WHOQOL-BREF's Social Relationships subscale (p < .008). Repeated-measures analyses of variance showed a significant difference in COPM performance and satisfaction scores (p < .001). The activity program effectively improved occupational performance and satisfaction and social relationships of community-living women diagnosed with cancer. Copyright © 2018 by the American Occupational Therapy Association, Inc.
Determining Risk of Falls in Community Dwelling Older Adults: A Systematic Review and Meta-analysis Using Posttest Probability

PubMed Central

Fritz, Stacy; Middleton, Addie; Allison, Leslie; Wingood, Mariana; Phillips, Emma; Criss, Michelle; Verma, Sangita; Osborne, Jackie; Chui, Kevin K.

2017-01-01

Background: Falls and their consequences are significant concerns for older adults, caregivers, and health care providers. Identification of fall risk is crucial for appropriate referral to preventive interventions. Falls are multifactorial; no single measure is an accurate diagnostic tool. There is limited information on which history question, self-report measure, or performance-based measure, or combination of measures, best predicts future falls. Purpose: First, to evaluate the predictive ability of history questions, self-report measures, and performance-based measures for assessing fall risk of community-dwelling older adults by calculating and comparing posttest probability (PoTP) values for individual test/measures. Second, to evaluate usefulness of cumulative PoTP for measures in combination. Data Sources: To be included, a study must have used fall status as an outcome or classification variable, have a sample size of at least 30 ambulatory community-living older adults (≥65 years), and track falls occurrence for a minimum of 6 months. Studies in acute or long-term care settings, as well as those including participants with significant cognitive or neuromuscular conditions related to increased fall risk, were excluded. Searches of Medline/PubMED and Cumulative Index of Nursing and Allied Health (CINAHL) from January 1990 through September 2013 identified 2294 abstracts concerned with fall risk assessment in community-dwelling older adults. Study Selection: Because the number of prospective studies of fall risk assessment was limited, retrospective studies that classified participants (faller/nonfallers) were also included. Ninety-five full-text articles met inclusion criteria; 59 contained necessary data for calculation of PoTP. The Quality Assessment Tool for Diagnostic Accuracy Studies (QUADAS) was used to assess each study's methodological quality. Data Extraction: Study design and QUADAS score determined the level of evidence. Data for calculation of sensitivity (Sn), specificity (Sp), likelihood ratios (LR), and PoTP values were available for 21 of 46 measures used as search terms. An additional 73 history questions, self-report measures, and performance-based measures were used in included articles; PoTP values could be calculated for 35. Data Synthesis: Evidence tables including PoTP values were constructed for 15 history questions, 15 self-report measures, and 26 performance-based measures. Recommendations for clinical practice were based on consensus. Limitations: Variations in study quality, procedures, and statistical analyses challenged data extraction, interpretation, and synthesis. There was insufficient data for calculation of PoTP values for 63 of 119 tests. Conclusions: No single test/measure demonstrated strong PoTP values. Five history questions, 2 self-report measures, and 5 performance-based measures may have clinical usefulness in assessing risk of falling on the basis of cumulative PoTP. Berg Balance Scale score (≤50 points), Timed Up and Go times (≥12 seconds), and 5 times sit-to-stand times (≥12) seconds are currently the most evidence-supported functional measures to determine individual risk of future falls. Shortfalls identified during review will direct researchers to address knowledge gaps. PMID:27537070
Usability of a home-based test for the measurement of fecal calprotectin in asymptomatic IBD patients.

PubMed

Bello, Caroline; Roseth, Arne; Guardiola, Jordi; Reenaers, Catherine; Ruiz-Cerulla, Alexandra; Van Kemseke, Catherine; Arajol, Claudia; Reinhard, Christian; Seidel, Laurence; Louis, Edouard

2017-09-01

The aim of our work was to test the usability of fecal calprotectin (FC) home-based test in inflammatory bowel disease (IBD) patients. IBD patients were prospectively recruited. They had to measure FC with a dedicated tool and smartphone application, 5 times at two weeks intervals over an 8 weeks period. They had to fill in a usability questionnaire at the first and the last FC measurement. A System Usability Scale (SUS: 0-100) and the Global Score of Usability (GSU: 0-85) were calculated. FC was also centrally measured by ELISA. Fifty-eight patients were recruited. Forty-two performed at least one FC measurement and 27 performed all the FC requested measurements. The median (IQR) SUS (0-100) at the first and last use were 85 (78-90) and 81 (70-88), respectively; the median (IQR) GSU (0-85) at the first and last use were 74 (69-80) and 77 (68-83), respectively. Adherence to the planned measurements and usability of the tool were higher in females and in less severe disease. The intra-class correlation coefficient between home-based and centrally measured FC was 0.88. The adherence to home-based measurement of FC was fair. Usability scores for the home-based test were high. There was a good correlation with the centrally measured FC by ELISA. Copyright © 2017 Editrice Gastroenterologica Italiana S.r.l. Published by Elsevier Ltd. All rights reserved.
Low Temperature Noise Measurement of an InAs/GaSb-based nBn MWIR Detector

DTIC Science & Technology

2011-01-01

Measurement of an InAs/GaSb-based nBn MWIR Detector 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR( S ) 5d. PROJECT NUMBER...5e. TASK NUMBER 5f. WORK UNIT NUMBER 7. PERFORMING ORGANIZATION NAME( S ) AND ADDRESS(ES) Air Force Research Laboratory,Space Vehicles Directorate...3550 Aberdeen Ave SE,Kirtland AFB,NM,87117 8. PERFORMING ORGANIZATION REPORT NUMBER 9. SPONSORING/MONITORING AGENCY NAME( S ) AND ADDRESS(ES) 10
Performance-Based Contracting Within a State Substance Abuse Treatment System: A Preliminary Exploration of Differences in Client Access and Client Outcomes

PubMed Central

Brucker, Debra L.; Stewart, Maureen

2013-01-01

To explore whether the implementation of performance-based contracting (PBC) within the State of Maine’s substance abuse treatment system resulted in improved performance, one descriptive and two empirical analyses were conducted. The first analysis examined utilization and payment structure. The second study was designed to examine whether timeliness of access to outpatient (OP) and intensive outpatient (IOP) substance abuse assessments and treatment, measures that only became available after the implementation of PBC, differed between PBC and non-PBC agencies in the year following implementation of PBC. Using treatment admission records from the state treatment data system (N=9,128), logistic regression models run using generalized equation estimation techniques found no significant difference between PBC agencies and other agencies on timeliness of access to assessments or treatment, for both OP and IOP services. The third analysis, conducted using discharge data from the years prior to and after the implementation of performance-based contracting (N=6,740) for those agencies that became a part of the performance-based contracting system, was designed to assess differences in level of participation, retention, and completion of treatment. Regression models suggest that performance on OP client engagement and retention measures was significantly poorer the year after the implementation of PBC, but that temporal rather than a PBC effects were more significant. No differences were found between years for IOP level of participation or completion of treatment measures. PMID:21249461
A Model-Based Anomaly Detection Approach for Analyzing Streaming Aircraft Engine Measurement Data

NASA Technical Reports Server (NTRS)

Simon, Donald L.; Rinehart, Aidan W.

2014-01-01

This paper presents a model-based anomaly detection architecture designed for analyzing streaming transient aircraft engine measurement data. The technique calculates and monitors residuals between sensed engine outputs and model predicted outputs for anomaly detection purposes. Pivotal to the performance of this technique is the ability to construct a model that accurately reflects the nominal operating performance of the engine. The dynamic model applied in the architecture is a piecewise linear design comprising steady-state trim points and dynamic state space matrices. A simple curve-fitting technique for updating the model trim point information based on steadystate information extracted from available nominal engine measurement data is presented. Results from the application of the model-based approach for processing actual engine test data are shown. These include both nominal fault-free test case data and seeded fault test case data. The results indicate that the updates applied to improve the model trim point information also improve anomaly detection performance. Recommendations for follow-on enhancements to the technique are also presented and discussed.
A Model-Based Anomaly Detection Approach for Analyzing Streaming Aircraft Engine Measurement Data

NASA Technical Reports Server (NTRS)

Simon, Donald L.; Rinehart, Aidan Walker

2015-01-01

This paper presents a model-based anomaly detection architecture designed for analyzing streaming transient aircraft engine measurement data. The technique calculates and monitors residuals between sensed engine outputs and model predicted outputs for anomaly detection purposes. Pivotal to the performance of this technique is the ability to construct a model that accurately reflects the nominal operating performance of the engine. The dynamic model applied in the architecture is a piecewise linear design comprising steady-state trim points and dynamic state space matrices. A simple curve-fitting technique for updating the model trim point information based on steadystate information extracted from available nominal engine measurement data is presented. Results from the application of the model-based approach for processing actual engine test data are shown. These include both nominal fault-free test case data and seeded fault test case data. The results indicate that the updates applied to improve the model trim point information also improve anomaly detection performance. Recommendations for follow-on enhancements to the technique are also presented and discussed.
Sentence Similarity Analysis with Applications in Automatic Short Answer Grading

ERIC Educational Resources Information Center

Mohler, Michael A. G.

2012-01-01

In this dissertation, I explore unsupervised techniques for the task of automatic short answer grading. I compare a number of knowledge-based and corpus-based measures of text similarity, evaluate the effect of domain and size on the corpus-based measures, and also introduce a novel technique to improve the performance of the system by integrating…
Emergency medical services key performance measurement in Asian cities.

PubMed

Rahman, Nik Hisamuddin; Tanaka, Hideharu; Shin, Sang Do; Ng, Yih Yng; Piyasuwankul, Thammapad; Lin, Chih-Hao; Ong, Marcus Eng Hock

2015-01-01

One of the key principles in the recommended standards is that emergency medical service (EMS) providers should continuously monitor the quality and safety of their services. This requires service providers to implement performance monitoring using appropriate and relevant measures including key performance indicators. In Asia, EMS systems are at different developmental phases and maturity. This will create difficultly in benchmarking or assessing the quality of EMS performance across the region. An attempt was made to compare the EMS performance index based on the structure, process, and outcome analysis. The data was collected from the Pan-Asian Resuscitation Outcome Study (PAROS) data among few Asian cities, namely, Tokyo, Osaka, Singapore, Bangkok, Kuala Lumpur, Taipei, and Seoul. The parameters of inclusions were broadly divided into structure, process, and outcome measurements. The data was collected by the site investigators from each city and keyed into the electronic web-based data form which is secured strictly by username and passwords. Generally, there seems to be a more uniformity for EMS performance parameters among the more developed EMS systems. The major problem with the EMS agencies in the cities of developing countries like Bangkok and Kuala Lumpur is inadequate or unavailable data pertaining to EMS performance. There is non-uniformity in the EMS performance measurement across the Asian cities. This creates difficulty for EMS performance index comparison and benchmarking. Hopefully, in the future, collaborative efforts such as the PAROS networking group will further enhance the standardization in EMS performance reporting across the region.
Ultrasound semi-automated measurement of fetal nuchal translucency thickness based on principal direction estimation

NASA Astrophysics Data System (ADS)

Yoon, Heechul; Lee, Hyuntaek; Jung, Haekyung; Lee, Mi-Young; Won, Hye-Sung

2015-03-01

The objective of the paper is to introduce a novel method for nuchal translucency (NT) boundary detection and thickness measurement, which is one of the most significant markers in the early screening of chromosomal defects, namely Down syndrome. To improve the reliability and reproducibility of NT measurements, several automated methods have been introduced. However, the performance of their methods degrades when NT borders are tilted due to varying fetal movements. Therefore, we propose a principal direction estimation based NT measurement method to provide reliable and consistent performance regardless of both fetal positions and NT directions. At first, Radon Transform and cost function are used to estimate the principal direction of NT borders. Then, on the estimated angle bin, i.e., the main direction of NT, gradient based features are employed to find initial NT lines which are beginning points of the active contour fitting method to find real NT borders. Finally, the maximum thickness is measured from distances between the upper and lower border of NT by searching along to the orthogonal lines of main NT direction. To evaluate the performance, 89 of in vivo fetal images were collected and the ground-truth database was measured by clinical experts. Quantitative results using intraclass correlation coefficients and difference analysis verify that the proposed method can improve the reliability and reproducibility in the measurement of maximum NT thickness.

Neuropsychological predictors of performance-based measures of functional capacity and social skills in individuals with severe mental illness.

PubMed

Mahmood, Zanjbeel; Burton, Cynthia Z; Vella, Lea; Twamley, Elizabeth W

2018-04-13

Neuropsychological abilities may underlie successful performance of everyday functioning and social skills. We aimed to determine the strongest neuropsychological predictors of performance-based functional capacity and social skills performance across the spectrum of severe mental illness (SMI). Unemployed outpatients with SMI (schizophrenia, bipolar disorder, or major depression; n = 151) were administered neuropsychological (expanded MATRICS Consensus Cognitive Battery), functional capacity (UCSD Performance-Based Skills Assessment-Brief; UPSA-B), and social skills (Social Skills Performance Assessment; SSPA) assessments. Bivariate correlations between neuropsychological performance and UPSA-B and SSPA total scores showed that most neuropsychological tests were significantly associated with each performance-based measure. Forward entry stepwise regression analyses were conducted entering education, diagnosis, symptom severity, and neuropsychological performance as predictors of functional capacity and social skills. Diagnosis, working memory, sustained attention, and category and letter fluency emerged as significant predictors of functional capacity, in a model that explained 43% of the variance. Negative symptoms, sustained attention, and letter fluency were significant predictors of social skill performance, in a model explaining 35% of the variance. Functional capacity is positively associated with neuropsychological functioning, but diagnosis remains strongly influential, with mood disorder participants outperforming those with psychosis. Social skill performance appears to be positively associated with sustained attention and verbal fluency regardless of diagnosis; however, negative symptom severity strongly predicts social skills performance. Improving neuropsychological functioning may improve psychosocial functioning in people with SMI. Published by Elsevier Ltd.
Developing physician pay arrangements: the cash and care equation.

PubMed

Levitch, J H

1998-11-01

Developing physician compensation packages that help a healthcare organization meet its business objectives while satisfying physician pay expectations requires new ways of linking pay to physician performance. Such compensation arrangements specifically should include pay tied to defined performance standards, compensation linked to group performance, performance incentives based on realistic, achievable goals, work performance measured by common criteria, and similar pay ensured for similar work. Final pay arrangements also should include items that are sometimes overlooked, such as fully delineated job responsibilities, performance measures aligned correctly with performance areas, and the value of benefits considered in the cash compensation levels.
TH-EF-BRB-10: Dosimetric Validation of a Trajectory Based Cranial SRS Treatment Technique On a Varian TrueBeam Linac

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wilson, B; Vancouver Cancer Centre, Vancouver, BC; Gete, E

2016-06-15

Purpose: This work investigates the dosimetric accuracy of a trajectory based delivery technique in which an optimized radiation beam is delivered along a Couch-Gantry trajectory that is formed by simultaneous rotation of the linac gantry and the treatment couch. Methods: Nine trajectory based cranial SRS treatment plans were created using in-house optimization software. The plans were calculated for delivery on the TrueBeam STx linac with 6MV photon beam. Dose optimization was performed along a user-defined trajectory using MLC modulation, dose rate modulation and jaw tracking. The pre-defined trajectory chosen for this study is formed by a couch rotation through itsmore » full range of 180 degrees while the gantry makes four partial arc sweeps which are 170 degrees each. For final dose calculation, the trajectory based plans were exported to the Varian Eclipse Treatment Planning System. The plans were calculated on a homogeneous cube phantom measuring 18.2×18.2×18.2 cm3 with the analytical anisotropic algorithm (AAA) using a 1mm3 calculation voxel. The plans were delivered on the TrueBeam linac via the developer’s mode. Point dose measurements were performed on 9 patients with the IBA CC01 mini-chamber with a sensitive volume of 0.01 cc. Gafchromic film measurements along the sagittal and coronal planes were performed on three of the 9 treatment plans. Point dose values were compared with ion chamber measurements. Gamma analysis comparing film measurement and AAA calculations was performed using FilmQA Pro. Results: The AAA calculations and measurements were in good agreement. The point dose difference between AAA and ion chamber measurements were within 2.2%. Gamma analysis test pass rates (2%, 2mm passing criteria) for the Gafchromic film measurements were >95%. Conclusion: We have successfully tested TrueBeam’s ability to deliver accurate trajectory based treatments involving simultaneous gantry and couch rotation with MLC and dose rate modulation along the trajectory.« less
Construction and performance of a dilution-refrigerator based spectroscopic-imaging scanning tunneling microscope.

PubMed

Singh, U R; Enayat, M; White, S C; Wahl, P

2013-01-01

We report on the set-up and performance of a dilution-refrigerator based spectroscopic imaging scanning tunneling microscope. It operates at temperatures below 10 mK and in magnetic fields up to 14T. The system allows for sample transfer and in situ cleavage. We present first-results demonstrating atomic resolution and the multi-gap structure of the superconducting gap of NbSe(2) at base temperature. To determine the energy resolution of our system we have measured a normal metal/vacuum/superconductor tunneling junction consisting of an aluminum tip on a gold sample. Our system allows for continuous measurements at base temperature on time scales of up to ≈170 h.
Association of Body Mass Index With Self-Report and Performance-Based Measures of Balance and Mobility

PubMed Central

Wert, David M.; Hile, Elizabeth S.; Studenski, Stephanie A.; Brach, Jennifer S.

2011-01-01

Background The incidence of obesity is increasing in older adults, with associated worsening in the burden of disability. Little is known about the impact of body mass index (BMI) on self-report and performance-based balance and mobility measures in older adults. Objective The purposes of this study were (1) to examine the association of BMI with measures of balance and mobility and (2) to explore potential explanatory factors. Design This was a cross-sectional, observational study. Methods Older adults (mean age=77.6 years) who participated in an ongoing observational study (N=120) were classified as normal weight (BMI=18.5–24.9 kg/m2), overweight (BMI=25.0–29.9 kg/m2), moderately obese (BMI=30.0–34.9 kg/m2), or severely obese (BMI≥35 kg/m2). Body mass index data were missing for one individual; thus, data for 119 participants were included in the analysis. Mobility and balance were assessed using self-report and performance-based measures and were compared among weight groups using analysis of variance and chi-square analysis for categorical data. Multiple linear regression analysis was used to examine the association among BMI, mobility, and balance after controlling for potential confounding variables. Results Compared with participants who were of normal weight or overweight, those with moderate or severe obesity were less likely to report their mobility as very good or excellent (52%, 55%, 39%, and 6%, respectively); however, there was no difference in self-report of balance among weight groups. Participants with severe obesity (n=17) had the lowest levels of mobility on the performance-based measures, followed by those who were moderately obese (n=31), overweight (n=42), and of normal weight (n=29). There were no differences on performance-based balance measures among weight groups. After controlling for age, sex, minority status, physical activity level, education level, and comorbid conditions, BMI still significantly contributed to mobility (β=−.02, adjusted R2=.41). Conclusions Although older adults with severe obesity were most impaired, those with less severe obesity also demonstrated significant decrements in mobility. PMID:21680770
Digitally enhanced homodyne interferometry.

PubMed

Sutton, Andrew J; Gerberding, Oliver; Heinzel, Gerhard; Shaddock, Daniel A

2012-09-24

We present two variations of a novel interferometry technique capable of simultaneously measuring multiple targets with high sensitivity. The technique performs a homodyne phase measurement by application of a four point phase shifting algorithm, with pseudo-random switching between points to allow multiplexed measurement based upon propagation delay alone. By multiplexing measurements and shifting complexity into signal processing, both variants realise significant complexity reductions over comparable methods. The first variant performs a typical coherent detection with a dedicated reference field and achieves a displacement noise floor 0.8 pm/√Hz above 50 Hz. The second allows for removal of the dedicated reference, resulting in further simplifications and improved low frequency performance with a 1 pm/√Hz noise floor measured down to 20 Hz. These results represent the most sensitive measurement performed using this style of interferometry whilst simultaneously reducing the electro-optic footprint.
Performance measures for lower gastrointestinal endoscopy: a European Society of Gastrointestinal Endoscopy (ESGE) quality improvement initiative

PubMed Central

Thomas-Gibson, Siwan; Bugajski, Marek; Bretthauer, Michael; Rees, Colin J; Dekker, Evelien; Hoff, Geir; Jover, Rodrigo; Suchanek, Stepan; Ferlitsch, Monika; Anderson, John; Roesch, Thomas; Hultcranz, Rolf; Racz, Istvan; Kuipers, Ernst J; Garborg, Kjetil; East, James E; Rupinski, Maciej; Seip, Birgitte; Bennett, Cathy; Senore, Carlo; Minozzi, Silvia; Bisschops, Raf; Domagk, Dirk; Valori, Roland; Spada, Cristiano; Hassan, Cesare; Dinis-Ribeiro, Mario; Rutter, Matthew D

2017-01-01

The European Society of Gastrointestinal Endoscopy and United European Gastroenterology present a short list of key performance measures for lower gastrointestinal endoscopy. We recommend that endoscopy services across Europe adopt the following seven key performance measures for lower gastrointestinal endoscopy for measurement and evaluation in daily practice at a center and endoscopist level: 1 rate of adequate bowel preparation (minimum standard 90%); 2 cecal intubation rate (minimum standard 90%); 3 adenoma detection rate (minimum standard 25%); 4 appropriate polypectomy technique (minimum standard 80%); 5 complication rate (minimum standard not set); 6 patient experience (minimum standard not set); 7 appropriate post-polypectomy surveillance recommendations (minimum standard not set). Other identified performance measures have been listed as less relevant based on an assessment of their importance, scientific acceptability, feasibility, usability, and comparison to competing measures. PMID:28507745
Using Pupil Diameter Changes for Measuring Mental Workload under Mental Processing

NASA Astrophysics Data System (ADS)

Batmaz, Ihsan; Ozturk, Mustafa

In this study, it is aimed to evaluate the mental workload by using a practical way which based on measuring pupil diameter changes that occurs under mental processing. To determine the mental effort required for each task, the video record of subjects` eyes are taken while they are performed different tasks and pupils were measured from the records. A group of university student, one female 9 males participated to the experiment. Additionally, NASA-TLX questionnaire is applied for the related mental tasks. For verification of results obtained from both indices, the correlation coefficient is calculated task base. The results show that there is weak and negative correlation between the indices on task base except 3rd task. By investigating pupil diameter measurements data too, it is founded that pupil dilates under mental workload during performing related tasks. For all tasks, pupil diameters of response periods increased according to reference baseline period.
A Measure of Team Resilience: Developing the Resilience at Work Team Scale.

PubMed

McEwen, Kathryn; Boyd, Carolyn M

2018-03-01

This study develops, and initial evaluates, a new measure of team-based resilience for use in research and practice. We conducted preliminary analyses, based on a cross-sectional sample of 344 employees nested within 31 teams. Seven dimensions were identified through exploratory and confirmatory factor analyses. The measure had high reliability and significant discrimination to indicate the presence of a unique team-based aspect of resilience that contributed to higher work engagement and higher self-rated team performance, over and above the effects of individual resilience. Multilevel analyses showed that team, but not individual, resilience predicted self-rated team performance. Practice implications include a need to focus on collective as well as individual behaviors in resilience-building. The measure provides a diagnostic instrument for teams and a scale to evaluate organizational interventions and research the relationship of resilience to other constructs.
An unsupervised method for estimating the global horizontal irradiance from photovoltaic power measurements

NASA Astrophysics Data System (ADS)

Nespoli, Lorenzo; Medici, Vasco

2017-12-01

In this paper, we present a method to determine the global horizontal irradiance (GHI) from the power measurements of one or more PV systems, located in the same neighborhood. The method is completely unsupervised and is based on a physical model of a PV plant. The precise assessment of solar irradiance is pivotal for the forecast of the electric power generated by photovoltaic (PV) plants. However, on-ground measurements are expensive and are generally not performed for small and medium-sized PV plants. Satellite-based services represent a valid alternative to on site measurements, but their space-time resolution is limited. Results from two case studies located in Switzerland are presented. The performance of the proposed method at assessing GHI is compared with that of free and commercial satellite services. Our results show that the presented method is generally better than satellite-based services, especially at high temporal resolutions.
Illegal performance enhancing drugs and doping in sport: a picture-based brief implicit association test for measuring athletes' attitudes.

PubMed

Brand, Ralf; Heck, Philipp; Ziegler, Matthias

2014-01-30

Doping attitude is a key variable in predicting athletes' intention to use forbidden performance enhancing drugs. Indirect reaction-time based attitude tests, such as the implicit association test, conceal the ultimate goal of measurement from the participant better than questionnaires. Indirect tests are especially useful when socially sensitive constructs such as attitudes towards doping need to be described. The present study serves the development and validation of a novel picture-based brief implicit association test (BIAT) for testing athletes' attitudes towards doping in sport. It shall provide the basis for a transnationally compatible research instrument able to harmonize anti-doping research efforts. Following a known-group differences validation strategy, the doping attitudes of 43 athletes from bodybuilding (representative for a highly doping prone sport) and handball (as a contrast group) were compared using the picture-based doping-BIAT. The Performance Enhancement Attitude Scale (PEAS) was employed as a corresponding direct measure in order to additionally validate the results. As expected, in the group of bodybuilders, indirectly measured doping attitudes as tested with the picture-based doping-BIAT were significantly less negative (η2 = .11). The doping-BIAT and PEAS scores correlated significantly at r = .50 for bodybuilders, and not significantly at r = .36 for handball players. There was a low error rate (7%) and a satisfactory internal consistency (rtt = .66) for the picture-based doping-BIAT. The picture-based doping-BIAT constitutes a psychometrically tested method, ready to be adopted by the international research community. The test can be administered via the internet. All test material is available "open source". The test might be implemented, for example, as a new effect-measure in the evaluation of prevention programs.
Illegal performance enhancing drugs and doping in sport: a picture-based brief implicit association test for measuring athletes’ attitudes

PubMed Central

2014-01-01

Background Doping attitude is a key variable in predicting athletes’ intention to use forbidden performance enhancing drugs. Indirect reaction-time based attitude tests, such as the implicit association test, conceal the ultimate goal of measurement from the participant better than questionnaires. Indirect tests are especially useful when socially sensitive constructs such as attitudes towards doping need to be described. The present study serves the development and validation of a novel picture-based brief implicit association test (BIAT) for testing athletes’ attitudes towards doping in sport. It shall provide the basis for a transnationally compatible research instrument able to harmonize anti-doping research efforts. Method Following a known-group differences validation strategy, the doping attitudes of 43 athletes from bodybuilding (representative for a highly doping prone sport) and handball (as a contrast group) were compared using the picture-based doping-BIAT. The Performance Enhancement Attitude Scale (PEAS) was employed as a corresponding direct measure in order to additionally validate the results. Results As expected, in the group of bodybuilders, indirectly measured doping attitudes as tested with the picture-based doping-BIAT were significantly less negative (η2 = .11). The doping-BIAT and PEAS scores correlated significantly at r = .50 for bodybuilders, and not significantly at r = .36 for handball players. There was a low error rate (7%) and a satisfactory internal consistency (r tt = .66) for the picture-based doping-BIAT. Conclusions The picture-based doping-BIAT constitutes a psychometrically tested method, ready to be adopted by the international research community. The test can be administered via the internet. All test material is available “open source”. The test might be implemented, for example, as a new effect-measure in the evaluation of prevention programs. PMID:24479865
A probability metric for identifying high-performing facilities: an application for pay-for-performance programs.

PubMed

Shwartz, Michael; Peköz, Erol A; Burgess, James F; Christiansen, Cindy L; Rosen, Amy K; Berlowitz, Dan

2014-12-01

Two approaches are commonly used for identifying high-performing facilities on a performance measure: one, that the facility is in a top quantile (eg, quintile or quartile); and two, that a confidence interval is below (or above) the average of the measure for all facilities. This type of yes/no designation often does not do well in distinguishing high-performing from average-performing facilities. To illustrate an alternative continuous-valued metric for profiling facilities--the probability a facility is in a top quantile--and show the implications of using this metric for profiling and pay-for-performance. We created a composite measure of quality from fiscal year 2007 data based on 28 quality indicators from 112 Veterans Health Administration nursing homes. A Bayesian hierarchical multivariate normal-binomial model was used to estimate shrunken rates of the 28 quality indicators, which were combined into a composite measure using opportunity-based weights. Rates were estimated using Markov Chain Monte Carlo methods as implemented in WinBUGS. The probability metric was calculated from the simulation replications. Our probability metric allowed better discrimination of high performers than the point or interval estimate of the composite score. In a pay-for-performance program, a smaller top quantile (eg, a quintile) resulted in more resources being allocated to the highest performers, whereas a larger top quantile (eg, being above the median) distinguished less among high performers and allocated more resources to average performers. The probability metric has potential but needs to be evaluated by stakeholders in different types of delivery systems.
Developmental long trace profiler using optimally aligned mirror based pentaprism

DOE Office of Scientific and Technical Information (OSTI.GOV)

Barber, Samuel K; Morrison, Gregory Y.; Yashchuk, Valeriy V.

2010-07-21

A low-budget surface slope measuring instrument, the Developmental Long Trace Profiler (DLTP), was recently brought into operation at the Advanced Light Source Optical Metrology Laboratory [Nucl. Instr. and Meth. A 616, 212-223 (2010)]. The instrument is based on a precisely calibrated autocollimator and a movable pentaprism. The capability of the DLTP to achieve sub-microradian surface slope metrology has been verified via cross-comparison measurements with other high-performance slope measuring instruments when measuring the same high-quality test optics. In the present work, a further improvement of the DLTP is achieved by replacing the existing bulk pentaprism with a specially designed mirror basedmore » pentaprism. A mirror based pentaprism offers the possibility to eliminate systematic errors introduced by inhomogeneity of the optical material and fabrication imperfections of a bulk pentaprism. We provide the details of the mirror based pentaprism design and describe an original experimental procedure for precision mutual alignment of the mirrors. The algorithm of the alignment procedure and its efficiency are verified with rigorous ray tracing simulations. Results of measurements of a spherically curved test mirror and a flat test mirror using the original bulk pentaprism are compared with measurements using the new mirror based pentaprism, demonstrating the improved performance.« less
PAM-4 Signaling over VCSELs with 0.13µm CMOS Chip Technology

NASA Astrophysics Data System (ADS)

Cunningham, J. E.; Beckman, D.; Zheng, Xuezhe; Huang, Dawei; Sze, T.; Krishnamoorthy, A. V.

2006-12-01

We present results for VCSEL based links operating PAM-4 signaling using a commercial 0.13µm CMOS technology. We perform a complete link analysis of the Bit Error Rate, Q factor, random and deterministic jitter by measuring waterfall curves versus margins in time and amplitude. We demonstrate that VCSEL based PAM 4 can match or even improve performance over binary signaling under conditions of a bandwidth limited, 100meter multi-mode optical link at 5Gbps. We present the first sensitivity measurements for optical PAM-4 and compare it with binary signaling. Measured benefits are reconciled with information theory predictions.
PAM-4 Signaling over VCSELs with 0.13microm CMOS Chip Technology.

PubMed

Cunningham, J E; Beckman, D; Zheng, Xuezhe; Huang, Dawei; Sze, T; Krishnamoorthy, A V

2006-12-11

We present results for VCSEL based links operating PAM-4 signaling using a commercial 0.13microm CMOS technology. We perform a complete link analysis of the Bit Error Rate, Q factor, random and deterministic jitter by measuring waterfall curves versus margins in time and amplitude. We demonstrate that VCSEL based PAM-4 can match or even improve performance over binary signaling under conditions of a bandwidth limited, 100meter multi-mode optical link at 5Gbps. We present the first sensitivity measurements for optical PAM-4 and compare it with binary signaling. Measured benefits are reconciled with information theory predictions.
Spectral contents readout of birefringent sensor

NASA Technical Reports Server (NTRS)

Redner, Alex S.

1989-01-01

The technical objective of this research program was to develop a birefringent sensor, capable of measuring strain/stress up to 2000 F and a readout system based on Spectral Contents analysis. As a result of the research work, a data acquisition system was developed, capable of measuring strain birefringence in a sensor at 2000 F, with multi-point static and dynamic capabilities. The system uses a dedicated spectral analyzer for evaluation of stress-birefringence and a PC-based readout. Several sensor methods were evaluated. Fused silica was found most satisfactory. In the final evaluation, measurements were performed up to 2000 F and the system performance exceeded expectations.
Experimental realization of generalized qubit measurements based on quantum walks

NASA Astrophysics Data System (ADS)

Zhao, Yuan-yuan; Yu, Neng-kun; Kurzyński, Paweł; Xiang, Guo-yong; Li, Chuan-Feng; Guo, Guang-Can

2015-04-01

We report an experimental implementation of a single-qubit generalized measurement scenario, the positive-operator valued measure (POVM), based on a quantum walk model. The qubit is encoded in a single-photon polarization. The photon performs a quantum walk on an array of optical elements, where the polarization-dependent translation is performed via birefringent beam displacers and a change of the polarization is implemented with the help of wave plates. We implement: (i) trine POVM, i.e., the POVM elements uniformly distributed on an equatorial plane of the Bloch sphere; (ii) symmetric-informationally-complete (SIC) POVM; and (iii) unambiguous discrimination of two nonorthogonal qubit states.
48 CFR 37.601 - General.

Code of Federal Regulations, 2010 CFR

2010-10-01

... a performance work statement or a statement of objectives (see 37.602). (b) Performance-based contracts for services shall include— (1) A performance work statement (PWS); (2) Measurable performance standards (i.e., in terms of quality, timeliness, quantity, etc.) and the method of assessing contractor...
48 CFR 37.601 - General.

Code of Federal Regulations, 2012 CFR

2012-10-01

... a performance work statement or a statement of objectives (see 37.602). (b) Performance-based contracts for services shall include— (1) A performance work statement (PWS); (2) Measurable performance standards (i.e., in terms of quality, timeliness, quantity, etc.) and the method of assessing contractor...

48 CFR 37.601 - General.

Code of Federal Regulations, 2014 CFR

2014-10-01

... a performance work statement or a statement of objectives (see 37.602). (b) Performance-based contracts for services shall include— (1) A performance work statement (PWS); (2) Measurable performance standards (i.e., in terms of quality, timeliness, quantity, etc.) and the method of assessing contractor...
Assessing the Classification Accuracy of Early Numeracy Curriculum-Based Measures Using Receiver Operating Characteristic Curve Analysis

ERIC Educational Resources Information Center

Laracy, Seth D.; Hojnoski, Robin L.; Dever, Bridget V.

2016-01-01

Receiver operating characteristic curve (ROC) analysis was used to investigate the ability of early numeracy curriculum-based measures (EN-CBM) administered in preschool to predict performance below the 25th and 40th percentiles on a quantity discrimination measure in kindergarten. Areas under the curve derived from a sample of 279 students ranged…
Assessment of Rifle Marksmanship Skill Using Sensor-Based Measures. CRESST Report 755

ERIC Educational Resources Information Center

Nagashima, Sam O.; Chung, Gregory K. W. K.; Espinosa, Paul D.; Berka, Chris; Baker, Eva L.

2009-01-01

The goal of this report was to test the use of sensor-based skill measures in evaluating performance differences in rifle marksmanship. Ten shots were collected from 30 novices and 9 experts. Three measures for breath control and one for trigger control were used to predict skill classification. The data were fitted with a logistic regression…
Using Curriculum Based Measures To Identify and Monitor Progress in an Adult Basic Education Program. Final Report.

ERIC Educational Resources Information Center

Bean, Rita M.; And Others

The purpose of a project was to develop and test curriculum-based procedures and measures to monitor and assess the reading and writing progress of adults in a basic education program. The most efficient, reliable, and feasible measure of reading performance from beginning reading level through eighth-grade level was the repeated oral reading…
Measuring Success in Health Care Value-Based Purchasing Programs

PubMed Central

Damberg, Cheryl L.; Sorbero, Melony E.; Lovejoy, Susan L.; Martsolf, Grant R.; Raaen, Laura; Mandel, Daniel

2014-01-01

Abstract Value-based purchasing (VBP) refers to a broad set of performance-based payment strategies that link financial incentives to health care providers' performance on a set of defined measures in an effort to achieve better value. The U.S. Department of Health and Human Services is advancing the implementation of VBP across an array of health care settings in the Medicare program in response to requirements in the 2010 Patient Protection and Affordable Care Act, and policymakers are grappling with many decisions about how best to design and implement VBP programs so that they are successful in achieving stated goals. This article summarizes the current state of knowledge about VBP based on a review of the published literature, a review of publicly available documentation from VBP programs, and discussions with an expert panel composed of VBP program sponsors, health care providers and health systems, and academic researchers with VBP evaluation expertise. Three types of VBP models were the focus of the review: (1) pay-for-performance programs, (2) accountable care organizations, and (3) bundled payment programs. The authors report on VBP program goals and what constitutes success; the evidence on the impact of these programs; factors that characterize high– and low–performing providers in VBP programs; the measures, incentive structures, and benchmarks used by VBP programs; evidence on spillover effects and unintended consequences; and gaps in the knowledge base. PMID:28083347
Energy and Timing Measurement with Time-Based Detector Readout for PET Applications: Principle and Validation with Discrete Circuit Components

PubMed Central

Sun, Xishan; Lan, Allan K.; Bircher, Chad; Deng, Zhi; Liu, Yinong; Shao, Yiping

2011-01-01

A new signal processing method for PET application has been developed, with discrete circuit components to measure energy and timing of a gamma interaction based solely on digital timing processing without using an amplitude-to-digital convertor (ADC) or a constant fraction discriminator (CFD). A single channel discrete component time-based readout (TBR) circuit was implemented in a PC board. Initial circuit functionality and performance evaluations have been conducted. Accuracy and linearity of signal amplitude measurement were excellent, as measured with test pulses. The measured timing accuracy from test pulses reached to less than 300 ps, a value limited mainly by the timing jitter of the prototype electronics circuit. Both suitable energy and coincidence timing resolutions (~18% and ~1.0 ns) have been achieved with 3 × 3 × 20 mm3 LYSO scintillator and photomultiplier tube-based detectors. With its relatively simple circuit and low cost, TBR is expected to be a suitable front-end signal readout electronics for compact PET or other radiation detectors requiring the reading of a large number of detector channels and demanding high performance for energy and timing measurement. PMID:21743761
Noninvasive in vivo glucose sensing using an iris based technique

NASA Astrophysics Data System (ADS)

Webb, Anthony J.; Cameron, Brent D.

2011-03-01

Physiological glucose monitoring is important aspect in the treatment of individuals afflicted with diabetes mellitus. Although invasive techniques for glucose monitoring are widely available, it would be very beneficial to make such measurements in a noninvasive manner. In this study, a New Zealand White (NZW) rabbit animal model was utilized to evaluate a developed iris-based imaging technique for the in vivo measurement of physiological glucose concentration. The animals were anesthetized with isoflurane and an insulin/dextrose protocol was used to control blood glucose concentration. To further help restrict eye movement, a developed ocular fixation device was used. During the experimental time frame, near infrared illuminated iris images were acquired along with corresponding discrete blood glucose measurements taken with a handheld glucometer. Calibration was performed using an image based Partial Least Squares (PLS) technique. Independent validation was also performed to assess model performance along with Clarke Error Grid Analysis (CEGA). Initial validation results were promising and show that a high percentage of the predicted glucose concentrations are within 20% of the reference values.
Comparison of computer-assisted instruction (CAI) versus traditional textbook methods for training in abdominal examination (Japanese experience).

PubMed

Qayumi, A K; Kurihara, Y; Imai, M; Pachev, G; Seo, H; Hoshino, Y; Cheifetz, R; Matsuura, K; Momoi, M; Saleem, M; Lara-Guerra, H; Miki, Y; Kariya, Y

2004-10-01

This study aimed to compare the effects of computer-assisted, text-based and computer-and-text learning conditions on the performances of 3 groups of medical students in the pre-clinical years of their programme, taking into account their academic achievement to date. A fourth group of students served as a control (no-study) group. Participants were recruited from the pre-clinical years of the training programmes in 2 medical schools in Japan, Jichi Medical School near Tokyo and Kochi Medical School near Osaka. Participants were randomly assigned to 4 learning conditions and tested before and after the study on their knowledge of and skill in performing an abdominal examination, in a multiple-choice test and an objective structured clinical examination (OSCE), respectively. Information about performance in the programme was collected from school records and students were classified as average, good or excellent. Student and faculty evaluations of their experience in the study were explored by means of a short evaluation survey. Compared to the control group, all 3 study groups exhibited significant gains in performance on knowledge and performance measures. For the knowledge measure, the gains of the computer-assisted and computer-assisted plus text-based learning groups were significantly greater than the gains of the text-based learning group. The performances of the 3 groups did not differ on the OSCE measure. Analyses of gains by performance level revealed that high achieving students' learning was independent of study method. Lower achieving students performed better after using computer-based learning methods. The results suggest that computer-assisted learning methods will be of greater help to students who do not find the traditional methods effective. Explorations of the factors behind this are a matter for future research.
An AUC-based permutation variable importance measure for random forests

PubMed Central

2013-01-01

Background The random forest (RF) method is a commonly used tool for classification with high dimensional data as well as for ranking candidate predictors based on the so-called random forest variable importance measures (VIMs). However the classification performance of RF is known to be suboptimal in case of strongly unbalanced data, i.e. data where response class sizes differ considerably. Suggestions were made to obtain better classification performance based either on sampling procedures or on cost sensitivity analyses. However to our knowledge the performance of the VIMs has not yet been examined in the case of unbalanced response classes. In this paper we explore the performance of the permutation VIM for unbalanced data settings and introduce an alternative permutation VIM based on the area under the curve (AUC) that is expected to be more robust towards class imbalance. Results We investigated the performance of the standard permutation VIM and of our novel AUC-based permutation VIM for different class imbalance levels using simulated data and real data. The results suggest that the new AUC-based permutation VIM outperforms the standard permutation VIM for unbalanced data settings while both permutation VIMs have equal performance for balanced data settings. Conclusions The standard permutation VIM loses its ability to discriminate between associated predictors and predictors not associated with the response for increasing class imbalance. It is outperformed by our new AUC-based permutation VIM for unbalanced data settings, while the performance of both VIMs is very similar in the case of balanced classes. The new AUC-based VIM is implemented in the R package party for the unbiased RF variant based on conditional inference trees. The codes implementing our study are available from the companion website: http://www.ibe.med.uni-muenchen.de/organisation/mitarbeiter/070_drittmittel/janitza/index.html. PMID:23560875
An AUC-based permutation variable importance measure for random forests.

PubMed

Janitza, Silke; Strobl, Carolin; Boulesteix, Anne-Laure

2013-04-05

The random forest (RF) method is a commonly used tool for classification with high dimensional data as well as for ranking candidate predictors based on the so-called random forest variable importance measures (VIMs). However the classification performance of RF is known to be suboptimal in case of strongly unbalanced data, i.e. data where response class sizes differ considerably. Suggestions were made to obtain better classification performance based either on sampling procedures or on cost sensitivity analyses. However to our knowledge the performance of the VIMs has not yet been examined in the case of unbalanced response classes. In this paper we explore the performance of the permutation VIM for unbalanced data settings and introduce an alternative permutation VIM based on the area under the curve (AUC) that is expected to be more robust towards class imbalance. We investigated the performance of the standard permutation VIM and of our novel AUC-based permutation VIM for different class imbalance levels using simulated data and real data. The results suggest that the new AUC-based permutation VIM outperforms the standard permutation VIM for unbalanced data settings while both permutation VIMs have equal performance for balanced data settings. The standard permutation VIM loses its ability to discriminate between associated predictors and predictors not associated with the response for increasing class imbalance. It is outperformed by our new AUC-based permutation VIM for unbalanced data settings, while the performance of both VIMs is very similar in the case of balanced classes. The new AUC-based VIM is implemented in the R package party for the unbiased RF variant based on conditional inference trees. The codes implementing our study are available from the companion website: http://www.ibe.med.uni-muenchen.de/organisation/mitarbeiter/070_drittmittel/janitza/index.html.
Magnetoresistive sensors based on the elasticity of domain walls.

PubMed

Zhang, Xueying; Vernier, Nicolas; Cao, Zhiqiang; Leng, Qunwen; Cao, Anni; Ravelosona, Dafine; Zhao, Weisheng

2018-06-19

Magnetic sensors based on the magnetoresistance effects have a promising application prospect due to their excellent sensitivity and advantages in terms of the integration. However, competition between higher sensitivity and larger measuring range remains a problem. Here, we propose a novel mechanism for the design of magnetoresistive sensors: probing the perpendicular field by detecting the expansion of the elastic magnetic Domain Wall (DW) in the free layer of a spin valve or a magnetic tunnel junction. Performances of devices based on this mechanism, such as the sensitivity and the measuring range can be tuned by manipulating the geometry of the device, without changing the intrinsic properties of the material, thus promising a higher integration level and a better performance. The mechanism is theoretically explained based on the experimental results. Two examples are proposed and their functionality and performances are verified via micromagnetic simulation. © 2018 IOP Publishing Ltd.
A SiPM based real time dosimeter for radiotherapic beams

NASA Astrophysics Data System (ADS)

Berra, A.; Conti, V.; Lietti, D.; Milan, L.; Novati, C.; Ostinelli, A.; Prest, M.; Romanó, C.; Vallazza, E.

2015-02-01

This paper describes the development of a scintillator dosimeter prototype for radiotherapic applications based on plastic scintillating fibers readout by Silicon PhotoMultipliers. The dosimeter, whose probes are water equivalent, could be used for quality control measurements, beam characterization and in vivo dosimetry, allowing a real time measurement of the dose spatial distribution. This paper describes the preliminary percentual depth dose scan performed with clinical 6 and 18 MV photon beams, comparing the results with a reference curve. The measurements were performed using a Varian Clinac iX linear accelerator at the Radiotherapy Department of the St. Anna Hospital in Como (IT). The prototype has given promising results, allowing real time measurements of relative dose without applying any correction factors.
A New Raman Water Vapor Lidar Calibration Technique and Measurements in the Vicinity of Hurricane Bonnie

NASA Technical Reports Server (NTRS)

Evans, Keith D.; Demoz, Belay B.; Cadirola, Martin P.; Melfi, S. H.; Whiteman, David N.; Schwemmer, Geary K.; Starr, David OC.; Schmidlin, F. J.; Feltz, Wayne

2000-01-01

The NAcA/Goddard Space Flight Center Scanning Raman Lidar has made measurements of water vapor and aerosols for almost ten years. Calibration of the water vapor data has typically been performed by comparison with another water vapor sensor such as radiosondes. We present a new method for water vapor calibration that only requires low clouds, and surface pressure and temperature measurements. A sensitivity study was performed and the cloud base algorithm agrees with the radiosonde calibration to within 10- 15%. Knowledge of the true atmospheric lapse rate is required to obtain more accurate cloud base temperatures. Analysis of water vapor and aerosol measurements made in the vicinity of Hurricane Bonnie are discussed.
Sensors vs. experts - a performance comparison of sensor-based fall risk assessment vs. conventional assessment in a sample of geriatric patients.

PubMed

Marschollek, Michael; Rehwald, Anja; Wolf, Klaus-Hendrik; Gietzelt, Matthias; Nemitz, Gerhard; zu Schwabedissen, Hubertus Meyer; Schulze, Mareike

2011-06-28

Fall events contribute significantly to mortality, morbidity and costs in our ageing population. In order to identify persons at risk and to target preventive measures, many scores and assessment tools have been developed. These often require expertise and are costly to implement. Recent research investigates the use of wearable inertial sensors to provide objective data on motion features which can be used to assess individual fall risk automatically. So far it is unknown how well this new method performs in comparison with conventional fall risk assessment tools. The aim of our research is to compare the predictive performance of our new sensor-based method with conventional and established methods, based on prospective data. In a first study phase, 119 inpatients of a geriatric clinic took part in motion measurements using a wireless triaxial accelerometer during a Timed Up&Go (TUG) test and a 20 m walk. Furthermore, the St. Thomas Risk Assessment Tool in Falling Elderly Inpatients (STRATIFY) was performed, and the multidisciplinary geriatric care team estimated the patients' fall risk. In a second follow-up phase of the study, 46 of the participants were interviewed after one year, including a fall and activity assessment. The predictive performances of the TUG, the STRATIFY and team scores are compared. Furthermore, two automatically induced logistic regression models based on conventional clinical and assessment data (CONV) as well as sensor data (SENSOR) are matched. Among the risk assessment scores, the geriatric team score (sensitivity 56%, specificity 80%) outperforms STRATIFY and TUG. The induced logistic regression models CONV and SENSOR achieve similar performance values (sensitivity 68%/58%, specificity 74%/78%, AUC 0.74/0.72, +LR 2.64/2.61). Both models are able to identify more persons at risk than the simple scores. Sensor-based objective measurements of motion parameters in geriatric patients can be used to assess individual fall risk, and our prediction model's performance matches that of a model based on conventional clinical and assessment data. Sensor-based measurements using a small wearable device may contribute significant information to conventional methods and are feasible in an unsupervised setting. More prospective research is needed to assess the cost-benefit relation of our approach.
Sensors vs. experts - A performance comparison of sensor-based fall risk assessment vs. conventional assessment in a sample of geriatric patients

PubMed Central

2011-01-01

Background Fall events contribute significantly to mortality, morbidity and costs in our ageing population. In order to identify persons at risk and to target preventive measures, many scores and assessment tools have been developed. These often require expertise and are costly to implement. Recent research investigates the use of wearable inertial sensors to provide objective data on motion features which can be used to assess individual fall risk automatically. So far it is unknown how well this new method performs in comparison with conventional fall risk assessment tools. The aim of our research is to compare the predictive performance of our new sensor-based method with conventional and established methods, based on prospective data. Methods In a first study phase, 119 inpatients of a geriatric clinic took part in motion measurements using a wireless triaxial accelerometer during a Timed Up&Go (TUG) test and a 20 m walk. Furthermore, the St. Thomas Risk Assessment Tool in Falling Elderly Inpatients (STRATIFY) was performed, and the multidisciplinary geriatric care team estimated the patients' fall risk. In a second follow-up phase of the study, 46 of the participants were interviewed after one year, including a fall and activity assessment. The predictive performances of the TUG, the STRATIFY and team scores are compared. Furthermore, two automatically induced logistic regression models based on conventional clinical and assessment data (CONV) as well as sensor data (SENSOR) are matched. Results Among the risk assessment scores, the geriatric team score (sensitivity 56%, specificity 80%) outperforms STRATIFY and TUG. The induced logistic regression models CONV and SENSOR achieve similar performance values (sensitivity 68%/58%, specificity 74%/78%, AUC 0.74/0.72, +LR 2.64/2.61). Both models are able to identify more persons at risk than the simple scores. Conclusions Sensor-based objective measurements of motion parameters in geriatric patients can be used to assess individual fall risk, and our prediction model's performance matches that of a model based on conventional clinical and assessment data. Sensor-based measurements using a small wearable device may contribute significant information to conventional methods and are feasible in an unsupervised setting. More prospective research is needed to assess the cost-benefit relation of our approach. PMID:21711504
Spin ensemble-based AC magnetometry using concatenated dynamical decoupling at low temperatures

NASA Astrophysics Data System (ADS)

Farfurnik, D.; Jarmola, A.; Budker, D.; Bar-Gill, N.

2018-01-01

Ensembles of nitrogen-vacancy centers in diamond are widely used as AC magnetometers. While such measurements are usually performed using standard (XY) dynamical decoupling (DD) protocols at room temperature, we study the sensitivities achieved by utilizing various DD protocols, for measuring magnetic AC fields at frequencies in the 10-250 kHz range, at room temperature and 77 K. By performing measurements on an isotopically pure 12C sample, we find that the Carr-Purcell-Meiboom-Gill protocol, which is not robust against pulse imperfections, is less efficient for magnetometry than robust XY-based sequences. The concatenation of a standard XY-based protocol may enhance the sensitivities only for measuring high-frequency fields, for which many (> 500) DD pulses are necessary and the robustness against pulse imperfections is critical. Moreover, we show that cooling is effective only for measuring low-frequency fields (˜10 kHz), for which the experiment time approaches T 1 at a small number of applied DD pulses.
Robust Target Tracking with Multi-Static Sensors under Insufficient TDOA Information.

PubMed

Shin, Hyunhak; Ku, Bonhwa; Nelson, Jill K; Ko, Hanseok

2018-05-08

This paper focuses on underwater target tracking based on a multi-static sonar network composed of passive sonobuoys and an active ping. In the multi-static sonar network, the location of the target can be estimated using TDOA (Time Difference of Arrival) measurements. However, since the sensor network may obtain insufficient and inaccurate TDOA measurements due to ambient noise and other harsh underwater conditions, target tracking performance can be significantly degraded. We propose a robust target tracking algorithm designed to operate in such a scenario. First, track management with track splitting is applied to reduce performance degradation caused by insufficient measurements. Second, a target location is estimated by a fusion of multiple TDOA measurements using a Gaussian Mixture Model (GMM). In addition, the target trajectory is refined by conducting a stack-based data association method based on multiple-frames measurements in order to more accurately estimate target trajectory. The effectiveness of the proposed method is verified through simulations.
Deflection-Based Aircraft Structural Loads Estimation with Comparison to Flight

NASA Technical Reports Server (NTRS)

Lizotte, Andrew M.; Lokos, William A.

2005-01-01

Traditional techniques in structural load measurement entail the correlation of a known load with strain-gage output from the individual components of a structure or machine. The use of strain gages has proved successful and is considered the standard approach for load measurement. However, remotely measuring aerodynamic loads using deflection measurement systems to determine aeroelastic deformation as a substitute to strain gages may yield lower testing costs while improving aircraft performance through reduced instrumentation weight. With a reliable strain and structural deformation measurement system this technique was examined. The objective of this study was to explore the utility of a deflection-based load estimation, using the active aeroelastic wing F/A-18 aircraft. Calibration data from ground tests performed on the aircraft were used to derive left wing-root and wing-fold bending-moment and torque load equations based on strain gages, however, for this study, point deflections were used to derive deflection-based load equations. Comparisons between the strain-gage and deflection-based methods are presented. Flight data from the phase-1 active aeroelastic wing flight program were used to validate the deflection-based load estimation method. Flight validation revealed a strong bending-moment correlation and slightly weaker torque correlation. Development of current techniques, and future studies are discussed.
TECHNICAL NOTE: Portable audio electronics for impedance-based measurements in microfluidics

NASA Astrophysics Data System (ADS)

Wood, Paul; Sinton, David

2010-08-01

We demonstrate the use of audio electronics-based signals to perform on-chip electrochemical measurements. Cell phones and portable music players are examples of consumer electronics that are easily operated and are ubiquitous worldwide. Audio output (play) and input (record) signals are voltage based and contain frequency and amplitude information. A cell phone, laptop soundcard and two compact audio players are compared with respect to frequency response; the laptop soundcard provides the most uniform frequency response, while the cell phone performance is found to be insufficient. The audio signals in the common portable music players and laptop soundcard operate in the range of 20 Hz to 20 kHz and are found to be applicable, as voltage input and output signals, to impedance-based electrochemical measurements in microfluidic systems. Validated impedance-based measurements of concentration (0.1-50 mM), flow rate (2-120 µL min-1) and particle detection (32 µm diameter) are demonstrated. The prevailing, lossless, wave audio file format is found to be suitable for data transmission to and from external sources, such as a centralized lab, and the cost of all hardware (in addition to audio devices) is ~10 USD. The utility demonstrated here, in combination with the ubiquitous nature of portable audio electronics, presents new opportunities for impedance-based measurements in portable microfluidic systems.
Deflection-Based Structural Loads Estimation From the Active Aeroelastic Wing F/A-18 Aircraft

NASA Technical Reports Server (NTRS)

Lizotte, Andrew M.; Lokos, William A.

2005-01-01

Traditional techniques in structural load measurement entail the correlation of a known load with strain-gage output from the individual components of a structure or machine. The use of strain gages has proved successful and is considered the standard approach for load measurement. However, remotely measuring aerodynamic loads using deflection measurement systems to determine aeroelastic deformation as a substitute to strain gages may yield lower testing costs while improving aircraft performance through reduced instrumentation weight. This technique was examined using a reliable strain and structural deformation measurement system. The objective of this study was to explore the utility of a deflection-based load estimation, using the active aeroelastic wing F/A-18 aircraft. Calibration data from ground tests performed on the aircraft were used to derive left wing-root and wing-fold bending-moment and torque load equations based on strain gages, however, for this study, point deflections were used to derive deflection-based load equations. Comparisons between the strain-gage and deflection-based methods are presented. Flight data from the phase-1 active aeroelastic wing flight program were used to validate the deflection-based load estimation method. Flight validation revealed a strong bending-moment correlation and slightly weaker torque correlation. Development of current techniques, and future studies are discussed.

Whole Building Cost and Performance Measurement: Data Collection Protocol Revision 2

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fowler, Kimberly M.; Spees, Kathleen L.; Kora, Angela R.

2009-03-27

This protocol was written for the Department of Energy’s Federal Energy Management Program (FEMP) to be used by the public as a tool for assessing building cost and performance measurement. The primary audiences are sustainable design professionals, asset owners, building managers, and research professionals within the Federal sector. The protocol was developed based on the need for measured performance and cost data on sustainable design projects. Historically there has not been a significant driver in the public or private sector to quantify whole building performance in comparable terms. The deployment of sustainable design into the building sector has initiated manymore » questions on the performance and operational cost of these buildings.« less
On the estimation algorithm used in adaptive performance optimization of turbofan engines

NASA Technical Reports Server (NTRS)

Espana, Martin D.; Gilyard, Glenn B.

1993-01-01

The performance seeking control algorithm is designed to continuously optimize the performance of propulsion systems. The performance seeking control algorithm uses a nominal model of the propulsion system and estimates, in flight, the engine deviation parameters characterizing the engine deviations with respect to nominal conditions. In practice, because of measurement biases and/or model uncertainties, the estimated engine deviation parameters may not reflect the engine's actual off-nominal condition. This factor has a necessary impact on the overall performance seeking control scheme exacerbated by the open-loop character of the algorithm. The effects produced by unknown measurement biases over the estimation algorithm are evaluated. This evaluation allows for identification of the most critical measurements for application of the performance seeking control algorithm to an F100 engine. An equivalence relation between the biases and engine deviation parameters stems from an observability study; therefore, it is undecided whether the estimated engine deviation parameters represent the actual engine deviation or whether they simply reflect the measurement biases. A new algorithm, based on the engine's (steady-state) optimization model, is proposed and tested with flight data. When compared with previous Kalman filter schemes, based on local engine dynamic models, the new algorithm is easier to design and tune and it reduces the computational burden of the onboard computer.
Evaluation of a home-based exercise program in the treatment of Alzheimer's disease: the Maximizing Independence in Dementia (MIND) study.

PubMed

Steinberg, Martin; Leoutsakos, Jeannie-Marie Sheppard; Podewils, Laura Jean; Lyketsos, C G

2009-07-01

To determine the feasibility and efficacy of a home-based exercise intervention program to improve the functional performance of patients with Alzheimer's Disease (AD). Twenty-seven home-dwelling patients with AD were randomized to either an exercise intervention program delivered by their caregivers or a home safety assessment control. Measures of functional performance (primary), cognition, neuropsychiatric symptoms, quality of life and caregiver burden (secondary) were obtained at baseline and at 6 and 12 weeks following randomization. For each outcome measure, intent-to-treat analyses using linear random effects models were performed. Feasibility and adverse events were also assessed. Adherence to the exercise program was good. On the primary outcomes (functional performance) patients in the exercise group demonstrated a trend for improved performance on measures of hand function and lower extremity strength. On secondary outcome measures, trends toward worse depression and lower quality of life ratings were noted. The physical exercise intervention developed for the study, delivered by caregivers to home-dwelling patients with AD, was feasible and was associated with a trend for improved functional performance in this group of frail patients. Given the limited efficacy to date of pharmacotherapies for AD, further study of exercise intervention, in a variety of care setting, is warranted.
Too Little and Too Much Trust: Performance Measurement in Australian Higher Education

ERIC Educational Resources Information Center

Woelert, Peter; Yates, Lyn

2015-01-01

A striking feature of contemporary Australian higher education governance is the strong emphasis on centralized, template style, metric-based, and consequential forms of performance measurement. Such emphasis is indicative of a low degree of political trust among the central authorities in Australia in the intrinsic capacity of universities and…
Fault Diagnosis Strategies for SOFC-Based Power Generation Plants

PubMed Central

Costamagna, Paola; De Giorgi, Andrea; Gotelli, Alberto; Magistri, Loredana; Moser, Gabriele; Sciaccaluga, Emanuele; Trucco, Andrea

2016-01-01

The success of distributed power generation by plants based on solid oxide fuel cells (SOFCs) is hindered by reliability problems that can be mitigated through an effective fault detection and isolation (FDI) system. However, the numerous operating conditions under which such plants can operate and the random size of the possible faults make identifying damaged plant components starting from the physical variables measured in the plant very difficult. In this context, we assess two classical FDI strategies (model-based with fault signature matrix and data-driven with statistical classification) and the combination of them. For this assessment, a quantitative model of the SOFC-based plant, which is able to simulate regular and faulty conditions, is used. Moreover, a hybrid approach based on the random forest (RF) classification method is introduced to address the discrimination of regular and faulty situations due to its practical advantages. Working with a common dataset, the FDI performances obtained using the aforementioned strategies, with different sets of monitored variables, are observed and compared. We conclude that the hybrid FDI strategy, realized by combining a model-based scheme with a statistical classifier, outperforms the other strategies. In addition, the inclusion of two physical variables that should be measured inside the SOFCs can significantly improve the FDI performance, despite the actual difficulty in performing such measurements. PMID:27556472
Development of performance measures based on visibility for effective placement of aids to navigation

NASA Astrophysics Data System (ADS)

Fang, Tae Hyun; Kim, Yeon-Gyu; Gong, In-Young; Park, Sekil; Kim, Ah-Young

2015-09-01

In order to develop the challenging process of placing Aids to Navigation (AtoN), we propose performance measures which quantifies the effect of such placement. The best placement of AtoNs is that from which the navigator can best recognize the information provided by an AtoN. The visibility of AtoNs depends mostly on light sources, the weather condition and the position of the navigator. Visual recognition is enabled by achieving adequate contrast between the AtoN light source and background light. Therefore, the performance measures can be formulated through the amount of differences between these two lights. For simplification, this approach is based on the values of the human factor suggested by International Association of Marine Aids to Navigation and Lighthouse Authorities (IALA). Performance measures for AtoN placement can be evaluated through AtoN Simulator, which has been being developed by KIOST/KRISO in Korea and has been launched by Korea National Research Program. Simulations for evaluation are carried out at waterway in Busan port in Korea.
Portraying the Contribution of Individual Behaviors to Team Cohesion and Performance

NASA Technical Reports Server (NTRS)

Parke, Bonny; Orasanu, Judith

2012-01-01

Behaviors of individuals in teams both contribute to and are molded by team dynamics. How they do so has been the subject of much research. A method of portraying individuals' behaviors in teams, the Team Diagramming Method (TDM) is presented. Behaviors are rated by other team members on three important dimensions: positivity/negativity, dominant/submissive, and task-orientedness/expressiveness. A study of 5-person teams engaging in a 3-day moon simulation task demonstrated that measures of these perceived behaviors as well as the variances of these behaviors correlated with cohesion measures and performance. The method shows strengths and weaknesses of particular teams and, by comparison with high-performing teams, suggests interventions based on individual as well as team behaviors. The primary goal of this study was to determine the extent to which these team level variables, derived from all team members' rated behaviors, were associated with previous methods of measuring cohesion and with performance. A secondary goal was to determine the stability of TDM measures over time by comparing team level variables based on ratings early and later in the team s work together.
Development and evaluation of a predictive algorithm for telerobotic task complexity

NASA Technical Reports Server (NTRS)

Gernhardt, M. L.; Hunter, R. C.; Hedgecock, J. C.; Stephenson, A. G.

1993-01-01

There is a wide range of complexity in the various telerobotic servicing tasks performed in subsea, space, and hazardous material handling environments. Experience with telerobotic servicing has evolved into a knowledge base used to design tasks to be 'telerobot friendly.' This knowledge base generally resides in a small group of people. Written documentation and requirements are limited in conveying this knowledge base to serviceable equipment designers and are subject to misinterpretation. A mathematical model of task complexity based on measurable task parameters and telerobot performance characteristics would be a valuable tool to designers and operational planners. Oceaneering Space Systems and TRW have performed an independent research and development project to develop such a tool for telerobotic orbital replacement unit (ORU) exchange. This algorithm was developed to predict an ORU exchange degree of difficulty rating (based on the Cooper-Harper rating used to assess piloted operations). It is based on measurable parameters of the ORU, attachment receptacle and quantifiable telerobotic performance characteristics (e.g., link length, joint ranges, positional accuracy, tool lengths, number of cameras, and locations). The resulting algorithm can be used to predict task complexity as the ORU parameters, receptacle parameters, and telerobotic characteristics are varied.
Note: Comparison experimental results of the laser heterodyne interferometer for angle measurement based on the Faraday effect.

PubMed

Zhang, Enzheng; Chen, Benyong; Zheng, Hao; Teng, Xueying; Yan, Liping

2018-04-01

A laser heterodyne interferometer for angle measurement based on the Faraday effect is proposed. A novel optical configuration, designed by using the orthogonal return method for a linearly polarized beam based on the Faraday effect, guarantees that the measurement beam can return effectively even though an angular reflector has a large lateral displacement movement. The optical configuration and measurement principle are presented in detail. Two verification experiments were performed; the experimental results show that the proposed interferometer can achieve a large lateral displacement tolerance of 7.4 mm and also can realize high precision angle measurement with a large measurement range.
Note: Comparison experimental results of the laser heterodyne interferometer for angle measurement based on the Faraday effect

NASA Astrophysics Data System (ADS)

Zhang, Enzheng; Chen, Benyong; Zheng, Hao; Teng, Xueying; Yan, Liping

2018-04-01

A laser heterodyne interferometer for angle measurement based on the Faraday effect is proposed. A novel optical configuration, designed by using the orthogonal return method for a linearly polarized beam based on the Faraday effect, guarantees that the measurement beam can return effectively even though an angular reflector has a large lateral displacement movement. The optical configuration and measurement principle are presented in detail. Two verification experiments were performed; the experimental results show that the proposed interferometer can achieve a large lateral displacement tolerance of 7.4 mm and also can realize high precision angle measurement with a large measurement range.
Performance measurement: A tool for program control

NASA Technical Reports Server (NTRS)

Abell, Nancy

1994-01-01

Performance measurement is a management tool for planning, monitoring, and controlling as aspects of program and project management--cost, schedule, and technical requirements. It is a means (concept and approach) to a desired end (effective program planning and control). To reach the desired end, however, performance measurement must be applied and used appropriately, with full knowledge and recognition of its power and of its limitations--what it can and cannot do for the project manager. What is the potential of this management tool? What does performance measurement do that a traditional plan vs. actual technique cannot do? Performance measurement provides an improvement over the customary comparison of how much money was spent (actual cost) vs. how much was planned to be spent based on a schedule of activities (work planned). This commonly used plan vs. actual comparison does not allow one to know from the numerical data if the actual cost incurred was for work intended to be done.
Ability-versus skill-based assessment of emotional intelligence.

PubMed

Bradberry, Travis R; Su, Lac D

2006-01-01

Emotional intelligence has received an intense amount of attention in leadership circles during the last decade and continuing debate exists concerning the best method for measuring this construct. This study analyzed leader emotional intelligence scores, measured via skill and ability methodologies, against leader job performance. Two hundred twelve employees from three organizations participated in this study. Scores on the Emotional Intelligence Appraisal, a skill-based assessment, were positively, though not significantly, correlated with scores on the MSCEIT, an ability-based assessment of emotional intelligence. Scores on the MSCEIT did not have a significant relationship with job performance in this study, whereas, scores on the Emotional Intelligence Appraisal had a strong link to leader job performance. The four subcomponents of the Emotional Intelligence Appraisal were examined against job performance. Relationship management was a stronger predictor of leader job performance than the other three subcomponents. Social awareness was the single emotional intelligence skill that did not have a significant link to leader job performance. Factor analyses yielded a two-component model of emotional intelligence encompassing personal and social competence, rather than confirmation of a four-part taxonomy.
Body surface assessment with 3D laser-based anthropometry: reliability, validation, and improvement of empirical surface formulae.

PubMed

Kuehnapfel, Andreas; Ahnert, Peter; Loeffler, Markus; Scholz, Markus

2017-02-01

Body surface area is a physiological quantity relevant for many medical applications. In clinical practice, it is determined by empirical formulae. 3D laser-based anthropometry provides an easy and effective way to measure body surface area but is not ubiquitously available. We used data from laser-based anthropometry from a population-based study to assess validity of published and commonly used empirical formulae. We performed a large population-based study on adults collecting classical anthropometric measurements and 3D body surface assessments (N = 1435). We determined reliability of the 3D body surface assessment and validity of 18 different empirical formulae proposed in the literature. The performance of these formulae is studied in subsets of sex and BMI. Finally, improvements of parameter settings of formulae and adjustments for sex and BMI were considered. 3D body surface measurements show excellent intra- and inter-rater reliability of 0.998 (overall concordance correlation coefficient, OCCC was used as measure of agreement). Empirical formulae of Fujimoto and Watanabe, Shuter and Aslani and Sendroy and Cecchini performed best with excellent concordance with OCCC > 0.949 even in subgroups of sex and BMI. Re-parametrization of formulae and adjustment for sex and BMI slightly improved results. In adults, 3D laser-based body surface assessment is a reliable alternative to estimation by empirical formulae. However, there are empirical formulae showing excellent results even in subgroups of sex and BMI with only little room for improvement.
Research On Vehicle-Based Driver Status/Performance Monitoring; Development, Validation, And Refinement Of Algorithms For Detection Of Driver Drowsiness, Final Report

DOT National Transportation Integrated Search

1994-12-01

THIS REPORT SUMMARIZES THE RESULTS OF A 3-YEAR RESEARCH PROJECT TO DEVELOP RELIABLE ALGORITHMS FOR THE DETECTION OF MOTOR VEHICLE DRIVER IMPAIRMENT DUE TO DROWSINESS. THESE ALGORITHMS ARE BASED ON DRIVING PERFORMANCE MEASURES THAT CAN POTENTIALLY BE ...
Performance of a computer-based assessment of cognitive function measures in two cohorts of seniors

USDA-ARS?s Scientific Manuscript database

Computer-administered assessment of cognitive function is being increasingly incorporated in clinical trials, however its performance in these settings has not been systematically evaluated. The Seniors Health and Activity Research Program (SHARP) pilot trial (N=73) developed a computer-based tool f...
Specifying and Refining a Measurement Model for a Computer-Based Interactive Assessment

ERIC Educational Resources Information Center

Levy, Roy; Mislevy, Robert J.

2004-01-01

The challenges of modeling students' performance in computer-based interactive assessments include accounting for multiple aspects of knowledge and skill that arise in different situations and the conditional dependencies among multiple aspects of performance. This article describes a Bayesian approach to modeling and estimating cognitive models…
Diversity, Effort, and Cooperation in Team-Based Learning

ERIC Educational Resources Information Center

Espey, Molly

2018-01-01

Student and team performance in 17 sections of an introductory microeconomic theory course taught using team-based learning are analyzed to determine what measurable characteristics of teams influence team and individual outcomes. Results suggest that team performance is positively influenced by the grade point average of the top individual on the…
Performance assessment in complex individual and team tasks

NASA Technical Reports Server (NTRS)

Eddy, Douglas R.

1992-01-01

Described here is an eclectic, performance based approach to assessing cognitive performance from multiple perspectives. The experience gained from assessing the effects of antihistamines and scenario difficulty on C (exp 2) decision making performance in Airborne Warning and Control Systems (AWACS) weapons director (WD) teams can serve as a model for realistic simulations in space operations. Emphasis is placed on the flexibility of measurement, hierarchical organization of measurement levels, data collection from multiple perspectives, and the difficulty of managing large amounts of data.
Comparison of Cognitive Orientation to daily Occupational Performance and conventional occupational therapy on occupational performance in individuals with stroke: A randomized controlled trial.

PubMed

Ahn, Si-Nae; Yoo, Eun-Young; Jung, Min-Ye; Park, Hae-Yean; Lee, Ji-Yeon; Choi, Yoo-Im

2017-01-01

Cognitive Orientation to daily Occupational Performance (CO-OP) approach based on cognitive strategy in occupational therapy. To investigate the effects of CO-OP approach on occupational performance in individuals with hemiparetic stroke. This study was designed as a 5-week, randomized, single-blind. Forty-three participants who had a diagnosis of first stroke were enrolled in this study. The participants were randomly assigned to the experimental group (n = 20) or the control group (n = 23). The experimental group conducted CO-OP approach while the control group conducted conventional occupational therapy based on occupational performance components. This study measured Canadian Occupational Performance Measure (COPM) and Performance Quality Rating Scale (PQRS). Outcome measurements were performed at baseline and post-intervention. After training, the scores of COPM and PQRS in trained task were significantly higher for the score in the experimental group than the control group. In addition, the non-trained task was significantly higher for the score in the experimental group than the control group in COPM and the PQRS. This study suggests that the CO-OP approach is beneficial effects on the occupational performance to improvement in individuals with hemiparetic stroke, and have positive effects on generalization and transfer of acquired skills.
An Approach to Experimental Design for the Computer Analysis of Complex Phenomenon

NASA Technical Reports Server (NTRS)

Rutherford, Brian

2000-01-01

The ability to make credible system assessments, predictions and design decisions related to engineered systems and other complex phenomenon is key to a successful program for many large-scale investigations in government and industry. Recently, many of these large-scale analyses have turned to computational simulation to provide much of the required information. Addressing specific goals in the computer analysis of these complex phenomenon is often accomplished through the use of performance measures that are based on system response models. The response models are constructed using computer-generated responses together with physical test results where possible. They are often based on probabilistically defined inputs and generally require estimation of a set of response modeling parameters. As a consequence, the performance measures are themselves distributed quantities reflecting these variabilities and uncertainties. Uncertainty in the values of the performance measures leads to uncertainties in predicted performance and can cloud the decisions required of the analysis. A specific goal of this research has been to develop methodology that will reduce this uncertainty in an analysis environment where limited resources and system complexity together restrict the number of simulations that can be performed. An approach has been developed that is based on evaluation of the potential information provided for each "intelligently selected" candidate set of computer runs. Each candidate is evaluated by partitioning the performance measure uncertainty into two components - one component that could be explained through the additional computational simulation runs and a second that would remain uncertain. The portion explained is estimated using a probabilistic evaluation of likely results for the additional computational analyses based on what is currently known about the system. The set of runs indicating the largest potential reduction in uncertainty is then selected and the computational simulations are performed. Examples are provided to demonstrate this approach on small scale problems. These examples give encouraging results. Directions for further research are indicated.

Research on the Countermeasures Based on TTPM Theory for the Improvement of the Basic Education Teachers Training Performance

ERIC Educational Resources Information Center

Huabai, Bu; Dengyu, Zhang; Xiuying, Shen; Hao, Tu

2012-01-01

Many elements of the basic education teachers' training performance are embedded in the training interaction and sharing, so the enhancement of the training performance needs a whole process management and control. Based on TTPM theory, this paper has put forward four measures that must be pay attention to during the management of the basic…
The Predictive Validity of Measures of Teacher Candidate Programs and Performance: Toward an Evidence-Based Approach to Teacher Preparation

ERIC Educational Resources Information Center

Henry, Gary T.; Campbell, Shanyce L.; Thompson, Charles L.; Patriarca, Linda A.; Luterbach, Kenneth J.; Lys, Diana B.; Covington, Vivian Martin

2013-01-01

Calls for evidence-based reform of teacher preparation programs (TPPs) suggest the question: Do the current indicators of progress and performance used by TPPs predict effectiveness of their graduates when they become teachers? In this study, the indicators of progress and performance used by one program are examined for their ability to predict…
Subjective and objective quantification of physician's workload and performance during radiation therapy planning tasks.

PubMed

Mazur, Lukasz M; Mosaly, Prithima R; Hoyle, Lesley M; Jones, Ellen L; Marks, Lawrence B

2013-01-01

To quantify, and compare, workload for several common physician-based treatment planning tasks using objective and subjective measures of workload. To assess the relationship between workload and performance to define workload levels where performance could be expected to decline. Nine physicians performed the same 3 tasks on each of 2 cases ("easy" vs "hard"). Workload was assessed objectively throughout the tasks (via monitoring of pupil size and blink rate), and subjectively at the end of each case (via National Aeronautics and Space Administration Task Load Index; NASA-TLX). NASA-TLX assesses the 6 dimensions (mental, physical, and temporal demands, frustration, effort, and performance); scores > or ≈ 50 are associated with reduced performance in other industries. Performance was measured using participants' stated willingness to approve the treatment plan. Differences in subjective and objective workload between cases, tasks, and experience were assessed using analysis of variance (ANOVA). The correlation between subjective and objective workload measures were assessed via the Pearson correlation test. The relationships between workload and performance measures were assessed using the t test. Eighteen case-wise and 54 task-wise assessments were obtained. Subjective NASA-TLX scores (P < .001), but not time-weighted averages of objective scores (P > .1), were significantly lower for the easy vs hard case. Most correlations between the subjective and objective measures were not significant, except between average blink rate and NASA-TLX scores (r = -0.34, P = .02), for task-wise assessments. Performance appeared to decline at NASA-TLX scores of ≥55. The NASA-TLX may provide a reasonable method to quantify subjective workload for broad activities, and objective physiologic eye-based measures may be useful to monitor workload for more granular tasks within activities. The subjective and objective measures, as herein quantified, do not necessarily track each other, and more work is needed to assess their utilities. From a series of controlled experiments, we found that performance appears to decline at subjective workload levels ≥55 (as measured via NASA-TLX), which is consistent with findings from other industries. Copyright © 2013 American Society for Radiation Oncology. Published by Elsevier Inc. All rights reserved.
Study on Fault Diagnostics of a Turboprop Engine Using Inverse Performance Model and Artificial Intelligent Methods

NASA Astrophysics Data System (ADS)

Kong, Changduk; Lim, Semyeong

2011-12-01

Recently, the health monitoring system of major gas path components of gas turbine uses mostly the model based method like the Gas Path Analysis (GPA). This method is to find quantity changes of component performance characteristic parameters such as isentropic efficiency and mass flow parameter by comparing between measured engine performance parameters such as temperatures, pressures, rotational speeds, fuel consumption, etc. and clean engine performance parameters without any engine faults which are calculated by the base engine performance model. Currently, the expert engine diagnostic systems using the artificial intelligent methods such as Neural Networks (NNs), Fuzzy Logic and Genetic Algorithms (GAs) have been studied to improve the model based method. Among them the NNs are mostly used to the engine fault diagnostic system due to its good learning performance, but it has a drawback due to low accuracy and long learning time to build learning data base if there are large amount of learning data. In addition, it has a very complex structure for finding effectively single type faults or multiple type faults of gas path components. This work builds inversely a base performance model of a turboprop engine to be used for a high altitude operation UAV using measured performance data, and proposes a fault diagnostic system using the base engine performance model and the artificial intelligent methods such as Fuzzy logic and Neural Network. The proposed diagnostic system isolates firstly the faulted components using Fuzzy Logic, then quantifies faults of the identified components using the NN leaned by fault learning data base, which are obtained from the developed base performance model. In leaning the NN, the Feed Forward Back Propagation (FFBP) method is used. Finally, it is verified through several test examples that the component faults implanted arbitrarily in the engine are well isolated and quantified by the proposed diagnostic system.
SU-F-T-552: A One-Year Evaluation of the QABeamChecker+ for Use with the CyberKnife System

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gersh, J; Spectrum Medical Physics, LLC, Greenville, SC

Purpose: By attaching an adapter plate with fiducial markers to the QA BeamChecker+ (Standard Imaging, Inc., Middleton, WI), the output of the CyberKnife can be accurately, efficiently, and consistently evaluated. The adapter plate, known as the Cutting Board, allows for automated alignment of the QABC+ using the CK’s stereoscopic kV image-based treatment localization system (TLS). Described herein is an evaluation of the system following a year of clinical utilization. Methods: Based on a CT scan of the QABC+ and CB, a treatment plan is generated which delivers a beam to each of the 5 plane-parallel ionization chambers. Following absolute calibrationmore » of the CK, the QA plan is delivered, and baseline measurements are acquired (and automatically corrected for temperature and pressure). This test was performed at the beginning of each treatment day for a year. A calibration evaluation (using a water-equivalent slab and short thimble chamber) is performed every four weeks, or whenever the QABC+ detects a deviation of more than 1.0%. Results: During baseline evaluation, repeat measurements (n=10) were performed, with an average output of 0.25% with an SD of 0.11%. As a test of the reposition of the QABC+ and CB, ten additional measurements were performed where between each acquisition, the entire system was removed and re-positioned using the TLS. The average output deviation was 0.30% with a SD of 0.13%. During the course of the year, 187 QABC+ measurements and 13 slab-based measurements were performed. The output measurements of the QABC+ correlated well with slab-based measurements (R2=0.909). Conclusion: By using the QABC+ and CB, daily output was evaluated accurately, efficiently, and consistently. From setup to break-down (including analysis), this test required 5 minutes instead of approximately 15 using traditional techniques (collimator-mounted ionization chambers). Additionally, by automatically saving resultant output deviation to a database, trend analysis was simplified. Spectrum Medical Physics, LLC of Greenville, SC has a consulting contract with Standard Imaging of Middleton, WI.« less
An integrated measure of display clutter based on feature content, user knowledge and attention allocation factors.

PubMed

Pankok, Carl; Kaber, David B

2018-05-01

Existing measures of display clutter in the literature generally exhibit weak correlations with task performance, which limits their utility in safety-critical domains. A literature review led to formulation of an integrated display data- and user knowledge-driven measure of display clutter. A driving simulation experiment was conducted in which participants were asked to search 'high' and 'low' clutter displays for navigation information. Data-driven measures and subjective perceptions of clutter were collected along with patterns of visual attention allocation and driving performance responses during time periods in which participants searched the navigation display for information. The new integrated measure was more strongly correlated with driving performance than other, previously developed measures of clutter, particularly in the case of low-clutter displays. Integrating display data and user knowledge factors with patterns of visual attention allocation shows promise for measuring display clutter and correlation with task performance, particularly for low-clutter displays. Practitioner Summary: A novel measure of display clutter was formulated, accounting for display data content, user knowledge states and patterns of visual attention allocation. The measure was evaluated in terms of correlations with driver performance in a safety-critical driving simulation study. The measure exhibited stronger correlations with task performance than previously defined measures.
Performance measurement in surgery through the National Quality Forum.

PubMed

Hyder, Joseph A; Roy, Nathalie; Wakeam, Elliot; Hernandez, Roland; Kim, Simon P; Bader, Angela M; Cima, Robert R; Nguyen, Louis L

2014-11-01

Performance measurement has become central to surgical practice. We systematically reviewed all endorsed performance measures from the National Quality Forum, the national clearing house for performance measures in health care, to identify measures relevant to surgical practice and describe measure stewardship, measure types, and identify gaps in measurement. Performance measures current to June 2014 were categorized by denominator statement as either assessing surgical practice in specific or as part of a mixed medical and surgical population. Measures were further classified by surgical specialty, Donabedian measure type, patients, disease and events targeted, reporting eligibility, and measure stewards. Of 637 measures, 123 measures assessed surgical performance in specific and 123 assessed surgical performance in aggregate. Physician societies (51 of 123, 41.5%) were more common than government agencies (32 of 123, 26.0%) among measure stewards for surgical measures, in particular, the Society for Thoracic Surgery (n = 32). Outcomes measures rather than process measures were common among surgical measures (62 of 123, 50.4%) compared with aggregate medical/surgical measures (46 of 123, 37.4%). Among outcomes measures, death alone was the most commonly specified outcome (24 of 62, 38.7%). Only 1 surgical measure addressed patient-centered care and only 1 measure addressed hospital readmission. We found 7 current surgical measures eligible for value-based purchasing. Surgical society stewards and outcomes measure types, particularly for cardiac surgery, were well represented in the National Quality Forum. Measures addressing patient-centered outcomes and the value of surgical decision-making were not well represented and may be suitable targets for measure innovation. Copyright © 2014 American College of Surgeons. Published by Elsevier Inc. All rights reserved.
Airborne and Ground-Based Measurements Using a High-Performance Raman Lidar. Part 2; Ground Based

NASA Technical Reports Server (NTRS)

Whiteman, David N.; Cadirola, Martin; Venable, Demetrius; Connell, Rasheen; Rush, Kurt; Leblanc, Thierry; McDermid, Stuart

2009-01-01

The same RASL hardware as described in part I was installed in a ground-based mobile trailer and used in a water vapor lidar intercomparison campaign, hosted at Table Mountain, CA, under the auspices of the Network for the Detection of Atmospheric Composition Change (NDACC). The converted RASL hardware demonstrated high sensitivity to lower stratospheric water vapor indicating that profiling water vapor at those altitudes with sufficient accuracy to monitor climate change is possible. The measurements from Table Mountain also were used to explain the reason, and correct , for sub-optimal airborne aerosol extinction performance during the flight campaign.
A large-scale intercomparison of stratospheric vertical distributions of NO2 and BrO retrieved from the SCIAMACHY limb measurements and ground-based twilight observations

NASA Astrophysics Data System (ADS)

Rozanov, Alexei; Hendrick, Francois; Lotz, Wolfhardt; van Roozendael, Michel; Bovensmann, Heinrich; Burrows, John P.

This study is devoted to the intercomparison of NO2 and BrO vertical profiles obtained from the satellite and ground-based measurements. Although, the ground-based observations are performed only at selected locations, they have a great potential to be used for the validation of satellite measurements since continuous long-term measurement series performed with the same instruments are available. Thus, long-term trends in the observed species can be analyzed and intercompared. Previous intercomparisons of the vertical distributions of NO2 and BrO retrieved from SCIAMACHY limb measurements at the University of Bremen and obtained at IASB-BIRA by applying a profiling technique to ground-based zenith-sky DOAS observations have shown a good agreement between the results of completely different measurement techniques. However, only a relatively short time period of one year was analyzed so far which do not allow investigating seasonal variations and trends. Furthermore, some minor discrepancies are still to be analyzed. In the current study, several years datasets obtained at Observatoire de Haute-Provence (OHP) in France and in Harestua in Norway will be compared to the retrievals of SCIAMACHY limb measurements. Seasonal and annual variations will be analyzed and possible reasons for the remaining discrepancies will be discussed.
Three-dimensional sensing methodology combining stereo vision and phase-measuring profilometry based on dynamic programming

NASA Astrophysics Data System (ADS)

Lee, Hyunki; Kim, Min Young; Moon, Jeon Il

2017-12-01

Phase measuring profilometry and moiré methodology have been widely applied to the three-dimensional shape measurement of target objects, because of their high measuring speed and accuracy. However, these methods suffer from inherent limitations called a correspondence problem, or 2π-ambiguity problem. Although a kind of sensing method to combine well-known stereo vision and phase measuring profilometry (PMP) technique simultaneously has been developed to overcome this problem, it still requires definite improvement for sensing speed and measurement accuracy. We propose a dynamic programming-based stereo PMP method to acquire more reliable depth information and in a relatively small time period. The proposed method efficiently fuses information from two stereo sensors in terms of phase and intensity simultaneously based on a newly defined cost function of dynamic programming. In addition, the important parameters are analyzed at the view point of the 2π-ambiguity problem and measurement accuracy. To analyze the influence of important hardware and software parameters related to the measurement performance and to verify its efficiency, accuracy, and sensing speed, a series of experimental tests were performed with various objects and sensor configurations.
Constrained optimization via simulation models for new product innovation

NASA Astrophysics Data System (ADS)

Pujowidianto, Nugroho A.

2017-11-01

We consider the problem of constrained optimization where the decision makers aim to optimize the primary performance measure while constraining the secondary performance measures. This paper provides a brief overview of stochastically constrained optimization via discrete event simulation. Most review papers tend to be methodology-based. This review attempts to be problem-based as decision makers may have already decided on the problem formulation. We consider constrained optimization models as there are usually constraints on secondary performance measures as trade-off in new product development. It starts by laying out different possible methods and the reasons using constrained optimization via simulation models. It is then followed by the review of different simulation optimization approach to address constrained optimization depending on the number of decision variables, the type of constraints, and the risk preferences of the decision makers in handling uncertainties.
Selecting measures to prevent deleterious alkali-silica reaction in concrete : rationale for the AASHTO PP65 prescriptive approach.

DOT National Transportation Integrated Search

2012-10-01

PP65-11 provides two approaches for selecting preventive measures: (i) a performance approach based on laboratory testing, and (ii) a prescriptive approach based on a consideration of the reactivity of the aggregate, type and size of structure, expos...
50 CFR 648.230 - Catch quotas and other restrictions.

Code of Federal Regulations, 2010 CFR

2010-10-01

... measures. Based on this review, the Spiny Dogfish Monitoring Committee shall recommend to the Joint Spiny... be set within the range of zero to the maximum allowed. The measures that may be recommended include...) Trip limits; (5) Changes to the Northeast Region SBRM, including the CV-based performance standard...
A Sensor Dynamic Measurement Error Prediction Model Based on NAPSO-SVM.

PubMed

Jiang, Minlan; Jiang, Lan; Jiang, Dingde; Li, Fei; Song, Houbing

2018-01-15

Dynamic measurement error correction is an effective way to improve sensor precision. Dynamic measurement error prediction is an important part of error correction, and support vector machine (SVM) is often used for predicting the dynamic measurement errors of sensors. Traditionally, the SVM parameters were always set manually, which cannot ensure the model's performance. In this paper, a SVM method based on an improved particle swarm optimization (NAPSO) is proposed to predict the dynamic measurement errors of sensors. Natural selection and simulated annealing are added in the PSO to raise the ability to avoid local optima. To verify the performance of NAPSO-SVM, three types of algorithms are selected to optimize the SVM's parameters: the particle swarm optimization algorithm (PSO), the improved PSO optimization algorithm (NAPSO), and the glowworm swarm optimization (GSO). The dynamic measurement error data of two sensors are applied as the test data. The root mean squared error and mean absolute percentage error are employed to evaluate the prediction models' performances. The experimental results show that among the three tested algorithms the NAPSO-SVM method has a better prediction precision and a less prediction errors, and it is an effective method for predicting the dynamic measurement errors of sensors.
Promoting Health Equity And Eliminating Disparities Through Performance Measurement And Payment.

PubMed

Anderson, Andrew C; O'Rourke, Erin; Chin, Marshall H; Ponce, Ninez A; Bernheim, Susannah M; Burstin, Helen

2018-03-01

Current approaches to health care quality have failed to reduce health care disparities. Despite dramatic increases in the use of quality measurement and associated payment policies, there has been no notable implementation of measurement strategies to reduce health disparities. The National Quality Forum developed a road map to demonstrate how measurement and associated policies can contribute to eliminating disparities and promote health equity. Specifically, the road map presents a four-part strategy whose components are identifying and prioritizing areas to reduce health disparities, implementing evidence-based interventions to reduce disparities, investing in the development and use of health equity performance measures, and incentivizing the reduction of health disparities and achievement of health equity. To demonstrate how the road map can be applied, we present an example of how measurement and value-based payment can be used to reduce racial disparities in hypertension among African Americans.
Visualizations of Travel Time Performance Based on Vehicle Reidentification Data

DOE Office of Scientific and Technical Information (OSTI.GOV)

Young, Stanley Ernest; Sharifi, Elham; Day, Christopher M.

This paper provides a visual reference of the breadth of arterial performance phenomena based on travel time measures obtained from reidentification technology that has proliferated in the past 5 years. These graphical performance measures are revealed through overlay charts and statistical distribution as revealed through cumulative frequency diagrams (CFDs). With overlays of vehicle travel times from multiple days, dominant traffic patterns over a 24-h period are reinforced and reveal the traffic behavior induced primarily by the operation of traffic control at signalized intersections. A cumulative distribution function in the statistical literature provides a method for comparing traffic patterns from variousmore » time frames or locations in a compact visual format that provides intuitive feedback on arterial performance. The CFD may be accumulated hourly, by peak periods, or by time periods specific to signal timing plans that are in effect. Combined, overlay charts and CFDs provide visual tools with which to assess the quality and consistency of traffic movement for various periods throughout the day efficiently, without sacrificing detail, which is a typical byproduct of numeric-based performance measures. These methods are particularly effective for comparing before-and-after median travel times, as well as changes in interquartile range, to assess travel time reliability.« less
A data base and analysis program for shuttle main engine dynamic pressure measurements. Appendix B: Data base plots for SSME tests 901-290 through 901-414

NASA Technical Reports Server (NTRS)

Coffin, T.

1986-01-01

A dynamic pressure data base and data base management system developed to characterize the Space Shuttle Main Engine (SSME) dynamic pressure environment is described. The data base represents dynamic pressure measurements obtained during single engine hot firing tesets of the SSME. Software is provided to permit statistical evaluation of selected measurements under specified operating conditions. An interpolation scheme is also included to estimate spectral trends with SSME power level. Flow dynamic environments in high performance rocket engines are discussed.
A data base and analysis program for shuttle main engine dynamic pressure measurements. Appendix C: Data base plots for SSME tests 902-214 through 902-314

NASA Technical Reports Server (NTRS)

Coffin, T.

1986-01-01

A dynamic pressure data base and data base management system developed to characterize the Space Shuttle Main Engine (SSME) dynamic pressure environment is reported. The data base represents dynamic pressure measurements obtained during single engine hot firing tests of the SSME. Software is provided to permit statistical evaluation of selected measurements under specified operating conditions. An interpolation scheme is included to estimate spectral trends with SSME power level. Flow Dynamic Environments in High Performance Rocket Engines are described.
A SOFTWARE TOOL TO COMPARE MEASURED AND SIMULATED BUILDING ENERGY PERFORMANCE DATA

DOE Office of Scientific and Technical Information (OSTI.GOV)

Maile, Tobias; Bazjanac, Vladimir; O'Donnell, James

2011-11-01

Building energy performance is often inadequate when compared to design goals. To link design goals to actual operation one can compare measured with simulated energy performance data. Our previously developed comparison approach is the Energy Performance Comparison Methodology (EPCM), which enables the identification of performance problems based on a comparison of measured and simulated performance data. In context of this method, we developed a software tool that provides graphing and data processing capabilities of the two performance data sets. The software tool called SEE IT (Stanford Energy Efficiency Information Tool) eliminates the need for manual generation of data plots andmore » data reformatting. SEE IT makes the generation of time series, scatter and carpet plots independent of the source of data (measured or simulated) and provides a valuable tool for comparing measurements with simulation results. SEE IT also allows assigning data points on a predefined building object hierarchy and supports different versions of simulated performance data. This paper briefly introduces the EPCM, describes the SEE IT tool and illustrates its use in the context of a building case study.« less
Reliability of Performance-Based Clinical Measurements to Assess Shoulder Girdle Kinematics and Positioning: Systematic Review.

PubMed

D'hondt, Norman E; Kiers, Henri; Pool, Jan J M; Hacquebord, Sijmen T; Terwee, Caroline B; Veeger, Dirkjan H E J

2017-01-01

Deviant shoulder girdle movement is suggested as an eminent factor in the etiology of shoulder pain. Reliable measurements of shoulder girdle kinematics are a prerequisite for optimizing clinical management strategies. The purpose of this study was to evaluate the reliability, measurement error, and internal consistency of measurements with performance-based clinical tests for shoulder girdle kinematics and positioning in patients with shoulder pain. The MEDLINE, Embase, CINAHL, and SPORTDiscus databases were systematically searched from inception to August 2015. Articles published in Dutch, English, or German were included if they involved the evaluation of at least one of the measurement properties of interest. Two reviewers independently evaluated the methodological quality per studied measurement property with the 4-point-rating scale of the COSMIN (COnsensus-based Standards for the selection of health Measurement INstruments) checklist, extracted data, and assessed the adequacy of the measurement properties. Forty studies comprising more than 30 clinical tests were included. Actual reported measurements of the tests were categorized into: (1) positional measurement methods, (2) measurement methods to determine dynamic characteristics, and (3) tests to diagnose impairments of shoulder girdle function. Best evidence synthesis of the tests was performed per measurement for each measurement property. All studies had significant limitations, including incongruence between test description and actual reported measurements and a lack of reporting on minimal important change. In general, the methodological quality of the selected studies was fair to poor. High-quality evidence indicates that measurements obtained with the Modified Scapular Assistance Test are not reliable for clinical use. Sound recommendations for the use of other tests could not be made due to inadequate evidence. Across studies, diversity in description, performance, and interpretation of similar tests was present, and different criteria were used to establish similar diagnoses, mostly without taking into account a clinically meaningful context. Consequently, these tests lack face validity, which hampers their clinical use. Further research on validity and how to integrate a clinically meaningful context of movement into clinical tests is warranted. © 2017 American Physical Therapy Association

Intelligent scanning: automated standard plane selection and biometric measurement of early gestational sac in routine ultrasound examination.

PubMed

Zhang, Ling; Chen, Siping; Chin, Chien Ting; Wang, Tianfu; Li, Shengli

2012-08-01

To assist radiologists and decrease interobserver variability when using 2D ultrasonography (US) to locate the standardized plane of early gestational sac (SPGS) and to perform gestational sac (GS) biometric measurements. In this paper, the authors report the design of the first automatic solution, called "intelligent scanning" (IS), for selecting SPGS and performing biometric measurements using real-time 2D US. First, the GS is efficiently and precisely located in each ultrasound frame by exploiting a coarse to fine detection scheme based on the training of two cascade AdaBoost classifiers. Next, the SPGS are automatically selected by eliminating false positives. This is accomplished using local context information based on the relative position of anatomies in the image sequence. Finally, a database-guided multiscale normalized cuts algorithm is proposed to generate the initial contour of the GS, based on which the GS is automatically segmented for measurement by a modified snake model. This system was validated on 31 ultrasound videos involving 31 pregnant volunteers. The differences between system performance and radiologist performance with respect to SPGS selection and length and depth (diameter) measurements are 7.5% ± 5.0%, 5.5% ± 5.2%, and 6.5% ± 4.6%, respectively. Additional validations prove that the IS precision is in the range of interobserver variability. Our system can display the SPGS along with biometric measurements in approximately three seconds after the video ends, when using a 1.9 GHz dual-core computer. IS of the GS from 2D real-time US is a practical, reproducible, and reliable approach.
More than a score: a qualitative study of ancillary benefits of performance measurement.

PubMed

Powell, Adam A; White, Katie M; Partin, Melissa R; Halek, Krysten; Hysong, Sylvia J; Zarling, Edwin; Kirsh, Susan R; Bloomfield, Hanna E

2014-08-01

Prior research has examined clinical effects of performance measurement systems. To the extent that non-clinical effects have been researched, the focus has been on negative unintended consequences. Yet, these same systems may also have ancillary benefits for patients and providers--that is, benefits that extend beyond improvements on clinical measures. The purpose of this study is to identify and describe potential ancillary benefits of performance measures as perceived by primary care staff and facility leaders in a large US healthcare system. In-person individual semistructured interviews were conducted with 59 primary care staff and facility leaders at four Veterans Health Administration facilities. Transcribed interviews were coded and organised into thematic categories. Interviewed staff observed that local performance measurement implementation practices can result in increased patient knowledge and motivation. These effects on patients can lead to improved performance scores and additional ancillary benefits. Performance measurement implementation can also directly result in ancillary benefits for the patients and providers. Patients may experience greater satisfaction with care and psychosocial benefits associated with increased provider-patient communication. Ancillary benefits of performance measurement for providers include increased pride in individual or organisational performance and greater confidence that one's practice is grounded in evidence-based medicine. A comprehensive understanding of the effects of performance measurement systems needs to incorporate ancillary benefits as well as effects on clinical performance scores and negative unintended consequences. Although clinical performance has been the focus of most evaluations of performance measurement to date, both patient care and provider satisfaction may improve more rapidly if all three categories of effects are considered when designing and evaluating performance measurement systems. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.
Development of an Integrated Performance Measurement (PM) Model for Pharmaceutical Industry

PubMed Central

Shabaninejad, Hosein; Mirsalehian, Mohammad Hossein; Mehralian, Gholamhossein

2014-01-01

With respect to special characteristics of pharmaceutical industry and lack of reported performance measure, this study tries to design an integrated PM model for pharmaceutical companies. For generating this model; we first identified the key performance indicators (KPIs) and the key result indicators (KRIs) of a typical pharmaceutical company. Then, based on experts᾽ opinions, the identified indicators were ranked with respect to their importance, and the most important of them were selected to be used in the proposed model; In this model, we identified 25 KPIs and 12 KRIs. Although, this model is mostly appropriate to measure the performances of pharmaceutical companies, it can be also used to measure the performances of other industries with some modifications. We strongly recommend pharmaceutical managers to link these indicators with their payment and reward system, which can dramatically affect the performance of employees, and consequently their organization`s success. PMID:24711848
Measuring Symmetry in Children With Unrepaired Cleft Lip: Defining a Standard for the Three-Dimensional Midfacial Reference Plane.

PubMed

Wu, Jia; Heike, Carrie; Birgfeld, Craig; Evans, Kelly; Maga, Murat; Morrison, Clinton; Saltzman, Babette; Shapiro, Linda; Tse, Raymond

2016-11-01

Quantitative measures of facial form to evaluate treatment outcomes for cleft lip (CL) are currently limited. Computer-based analysis of three-dimensional (3D) images provides an opportunity for efficient and objective analysis. The purpose of this study was to define a computer-based standard of identifying the 3D midfacial reference plane of the face in children with unrepaired cleft lip for measurement of facial symmetry. The 3D images of 50 subjects (35 with unilateral CL, 10 with bilateral CL, five controls) were included in this study. Five methods of defining a midfacial plane were applied to each image, including two human-based (Direct Placement, Manual Landmark) and three computer-based (Mirror, Deformation, Learning) methods. Six blinded raters (three cleft surgeons, two craniofacial pediatricians, and one craniofacial researcher) independently ranked and rated the accuracy of the defined planes. Among computer-based methods, the Deformation method performed significantly better than the others. Although human-based methods performed best, there was no significant difference compared with the Deformation method. The average correlation coefficient among raters was .4; however, it was .7 and .9 when the angular difference between planes was greater than 6° and 8°, respectively. Raters can agree on the 3D midfacial reference plane in children with unrepaired CL using digital surface mesh. The Deformation method performed best among computer-based methods evaluated and can be considered a useful tool to carry out automated measurements of facial symmetry in children with unrepaired cleft lip.
Human behavior and human performance: Psychomotor demands

NASA Technical Reports Server (NTRS)

1992-01-01

The results of several experiments are presented in abstract form. These studies are critical for the interpretation and acceptance of flight based science to be conducted by the Behavior and Performance project. Some representative titles are as follow: External audio for IBM/PC compatible computers; A comparative assessment of psychomotor performance (target prediction by humans and macaques); Response path (a dependent measure for computer maze solving and other tasks); Behavioral asymmetries of psychomotor performance in Rhesus monkey (a dissociation between hand preference and skill); Testing primates with joystick based automated apparatus; and Environmental enrichment and performance assessment for ground or flight based research with primates;
Effort-Based Decision Making in Schizophrenia: Evaluation of Paradigms to Measure Motivational Deficits

PubMed Central

Green, Michael F.; Horan, William P.

2015-01-01

Effort-based decision making requires one to decide how much effort to expend for a certain amount of reward. As the amount of reward goes up most people are willing to exert more effort. This relationship between reward level and effort expenditure can be measured in specialized performance-based tasks that have only recently been applied to schizophrenia. Such tasks provide a way to measure objectively motivational deficits in schizophrenia, which now are only assessed with clinical interviews of negative symptoms. The articles in this theme provide reviews of the relevant animal and human literatures (first 2 articles), and then a psychometric evaluation of 5 effort-based decision making paradigms (last 2 articles). This theme section is intended to stimulate interest in this emerging area among basic scientists developing paradigms for preclinical studies, human experimentalists trying to disentangle factors that contribute to performance on effort-based tasks, and investigators looking for objective endpoints for clinical trials of negative symptoms in schizophrenia. PMID:26108868
Objective measures of prospective memory do not correlate with subjective complaints in schizophrenia.

PubMed

Chan, Raymond C K; Wang, Ya; Ma, Zheng; Hong, Xiao-hong; Yuan, Yanbo; Yu, Xin; Li, Zhanjiang; Shum, David; Gong, Qi-yong

2008-08-01

While a number of studies have shown that individuals with schizophrenia are impaired on various types of prospective memory, few studies have examined the relationship between subjective and objective measures of this construct in this clinical group. The purpose of the current study was to explore the relationship between computer-based prospective memory tasks and the corresponding subjective complaints in patients with schizophrenia, individuals with schizotypal personality features, and healthy volunteers. The findings showed that patients with schizophrenia demonstrated significantly poorer performance in all domains of memory function except visual memory than individuals with schizotypal personality disorder and healthy controls. More importantly, there was a significant interaction effect of prospective memory type and group. Although patients with schizophrenia were found to show significantly poorer performance on computer-based measures of prospective memory than controls, their level of subjective complaint was not found to be significantly higher. While subjective complaints of prospective memory were found to associate significantly with self-reported executive dysfunctions, significant relationships were not found between these complaints and performance on a computer-based task of prospective memory and other objective measures of memory. Taken together, these findings suggest that subjective and objective measures of prospective memory are two distinct domains that might need to be assessed and addressed separately.
Sorghum and wheat differentially affect caecal microbiota and associated performance characteristics of meat chickens.

PubMed

Crisol-Martínez, Eduardo; Stanley, Dragana; Geier, Mark S; Hughes, Robert J; Moore, Robert J

2017-01-01

This study compared the effects of wheat- and sorghum-based diets on broiler chickens. The growth performance and caecal microbial community of chickens were measured and correlations between productivity and specific gut microbes were observed. Cobb broilers 15 days of age were individually caged and two dietary treatments were used, one with a wheat-based diet ( n = 48) and another one with a sorghum-based diet ( n = 48). Growth performance measurements were taken over a 10 day period and samples for microbiota analysis were taken at the end of that period. Caecal microbiota was characterised by sequencing of 16S bacterial rRNA gene amplicons. Overall, the results indicated that a sorghum-based diet produced higher apparent metabolisable energy (AME) and body-weight gain (BWG) values in chickens, compared to a wheat-based diet. Nevertheless, sorghum-fed birds had higher feed conversion ratio (FCR) values than wheat-fed birds, possibly because of some anti-nutritional factors in sorghum. Further analyses showed that caecal microbial community was significantly associated with AME values, but microbiota composition differed between dietary treatments. A number of bacteria were individually correlated with growth performance measurements. Numerous OTUs assigned to strains of Lactobacillus crispatus and Lachnospiraceae, which were prevalent in sorghum-fed chickens, were correlated with high AME and BWG values, respectively. Additionally, a number of OTUs assigned to Clostridiales that were prevalent in wheat-fed chickens were correlated with low FCR values. Overall, these results suggest that between-diet variations in growth performance were partly associated with changes in the caecal microbiota.
Measuring Education Inequalities: Concentration and Dispersion-Based Approach. Lessons from Kuznets Curve in MENA Region

ERIC Educational Resources Information Center

Ibourk, Aomar; Amaghouss, Jabrane

2012-01-01

Although the quantity of education is widely used to measure the economical and social performances of educative systems, only a few works have addressed the issue of equity in education. In this work, we have calculated two measures of inequality in education based on Barro and Lee's (2010) data: the Gini index of education and the standard…
Perturbing engine performance measurements to determine optimal engine control settings

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jiang, Li; Lee, Donghoon; Yilmaz, Hakan

Methods and systems for optimizing a performance of a vehicle engine are provided. The method includes determining an initial value for a first engine control parameter based on one or more detected operating conditions of the vehicle engine, determining a value of an engine performance variable, and artificially perturbing the determined value of the engine performance variable. The initial value for the first engine control parameter is then adjusted based on the perturbed engine performance variable causing the engine performance variable to approach a target engine performance variable. Operation of the vehicle engine is controlled based on the adjusted initialmore » value for the first engine control parameter. These acts are repeated until the engine performance variable approaches the target engine performance variable.« less
Measuring patient engagement: development and psychometric properties of the Patient Health Engagement (PHE) Scale

PubMed Central

Graffigna, Guendalina; Barello, Serena; Bonanomi, Andrea; Lozza, Edoardo

2015-01-01

Beyond the rhetorical call for increasing patients' engagement, policy makers recognize the urgency to have an evidence-based measure of patients' engagement and capture its effect when planning and implementing initiatives aimed at sustaining the engagement of consumers in their health. In this paper, authors describe the Patient Health Engagement Scale (PHE-scale), a measure of patient engagement that is grounded in rigorous conceptualization and appropriate psychometric methods. The scale was developed based on our previous conceptualization of patient engagement (the PHE-model). In particular, the items of the PHE-scale were developed based on the findings from the literature review and from interviews with chronic patients. Initial psychometric analysis was performed to pilot test a preliminary version of the items. The items were then refined and administered to a national sample of chronic patients (N = 382) to assess the measure's psychometric performance. A final phase of test-retest reliability was performed. The analysis showed that the PHE Scale has good psychometric properties with good correlation with concurrent measures and solid reliability. Having a valid and reliable measure to assess patient engagement is the first step in understanding patient engagement and its role in health care quality, outcomes, and cost containment. The PHE Scale shows a promising clinical relevance, indicating that it can be used to tailor intervention and assess changes after patient engagement interventions. PMID:25870566
Measuring patient engagement: development and psychometric properties of the Patient Health Engagement (PHE) Scale.

PubMed

Graffigna, Guendalina; Barello, Serena; Bonanomi, Andrea; Lozza, Edoardo

2015-01-01

Beyond the rhetorical call for increasing patients' engagement, policy makers recognize the urgency to have an evidence-based measure of patients' engagement and capture its effect when planning and implementing initiatives aimed at sustaining the engagement of consumers in their health. In this paper, authors describe the Patient Health Engagement Scale (PHE-scale), a measure of patient engagement that is grounded in rigorous conceptualization and appropriate psychometric methods. The scale was developed based on our previous conceptualization of patient engagement (the PHE-model). In particular, the items of the PHE-scale were developed based on the findings from the literature review and from interviews with chronic patients. Initial psychometric analysis was performed to pilot test a preliminary version of the items. The items were then refined and administered to a national sample of chronic patients (N = 382) to assess the measure's psychometric performance. A final phase of test-retest reliability was performed. The analysis showed that the PHE Scale has good psychometric properties with good correlation with concurrent measures and solid reliability. Having a valid and reliable measure to assess patient engagement is the first step in understanding patient engagement and its role in health care quality, outcomes, and cost containment. The PHE Scale shows a promising clinical relevance, indicating that it can be used to tailor intervention and assess changes after patient engagement interventions.
Diffusing-wave spectroscopy in a standard dynamic light scattering setup

NASA Astrophysics Data System (ADS)

Fahimi, Zahra; Aangenendt, Frank J.; Voudouris, Panayiotis; Mattsson, Johan; Wyss, Hans M.

2017-12-01

Diffusing-wave spectroscopy (DWS) extends dynamic light scattering measurements to samples with strong multiple scattering. DWS treats the transport of photons through turbid samples as a diffusion process, thereby making it possible to extract the dynamics of scatterers from measured correlation functions. The analysis of DWS data requires knowledge of the path length distribution of photons traveling through the sample. While for flat sample cells this path length distribution can be readily calculated and expressed in analytical form; no such expression is available for cylindrical sample cells. DWS measurements have therefore typically relied on dedicated setups that use flat sample cells. Here we show how DWS measurements, in particular DWS-based microrheology measurements, can be performed in standard dynamic light scattering setups that use cylindrical sample cells. To do so we perform simple random-walk simulations that yield numerical predictions of the path length distribution as a function of both the transport mean free path and the detection angle. This information is used in experiments to extract the mean-square displacement of tracer particles in the material, as well as the corresponding frequency-dependent viscoelastic response. An important advantage of our approach is that by performing measurements at different detection angles, the average path length through the sample can be varied. For measurements performed on a single sample cell, this gives access to a wider range of length and time scales than obtained in a conventional DWS setup. Such angle-dependent measurements also offer an important consistency check, as for all detection angles the DWS analysis should yield the same tracer dynamics, even though the respective path length distributions are very different. We validate our approach by performing measurements both on aqueous suspensions of tracer particles and on solidlike gelatin samples, for which we find our DWS-based microrheology data to be in good agreement with rheological measurements performed on the same samples.
VCSEL based Faraday rotation spectroscopy at 762nm for battery powered trace molecular oxygen detection

NASA Astrophysics Data System (ADS)

So, Stephen; Wysocki, Gerard

2010-02-01

Faraday Rotation Spectroscopy (FRS) is a polarization based spectroscopic technique which can provide higher sensitivity concentration measurements of paramagnetic gases and free radicals than direct absorption spectroscopic techniques. We have developed sensor systems which require only 0.2W to perform TDLAS (tunable diode laser absorption spectroscopy), and can additionally be quickly duty cycled, enabling operation in wireless sensor networks of laser-based trace gas sensors We adapted our integrated TDLAS electronics to perform FRS in a compact and more sensitive system for quantification of molecular oxygen (O2) using a 762.3nm VCSEL in the A band. Using an AC magnetic field, we demonstrate detector noise dominated performance, achieving 2.1×10-6/Hz1/2 equivalent detectable fractional absorption and a minimum detection limit of 462 ppmv O2 in 1 second in a 15cm path. At longer paths and integration times, such a sensor will enable oxygen measurements at biotic respiration levels (<1ppmv) to measure CO2 - O2 exchange for mapping natural exchange of greenhouse gases. Potential improvement of detection limits by increasing various system performance parameters is described.
Assessment of physical function and participation in chronic pain clinical trials: IMMPACT/OMERACT recommendations.

PubMed

Taylor, Ann M; Phillips, Kristine; Patel, Kushang V; Turk, Dennis C; Dworkin, Robert H; Beaton, Dorcas; Clauw, Daniel J; Gignac, Monique A M; Markman, John D; Williams, David A; Bujanover, Shay; Burke, Laurie B; Carr, Daniel B; Choy, Ernest H; Conaghan, Philip G; Cowan, Penney; Farrar, John T; Freeman, Roy; Gewandter, Jennifer; Gilron, Ian; Goli, Veeraindar; Gover, Tony D; Haddox, J David; Kerns, Robert D; Kopecky, Ernest A; Lee, David A; Malamut, Richard; Mease, Philip; Rappaport, Bob A; Simon, Lee S; Singh, Jasvinder A; Smith, Shannon M; Strand, Vibeke; Tugwell, Peter; Vanhove, Gertrude F; Veasley, Christin; Walco, Gary A; Wasan, Ajay D; Witter, James

2016-09-01

Although pain reduction is commonly the primary outcome in chronic pain clinical trials, physical functioning is also important. A challenge in designing chronic pain trials to determine efficacy and effectiveness of therapies is obtaining appropriate information about the impact of an intervention on physical function. The Initiative on Methods, Measurement, and Pain Assessment in Clinical Trials (IMMPACT) and Outcome Measures in Rheumatology (OMERACT) convened a meeting to consider assessment of physical functioning and participation in research on chronic pain. The primary purpose of this article is to synthesize evidence on the scope of physical functioning to inform work on refining physical function outcome measurement. We address issues in assessing this broad construct and provide examples of frequently used measures of relevant concepts. Investigators can assess physical functioning using patient-reported outcome (PRO), performance-based, and objective measures of activity. This article aims to provide support for the use of these measures, covering broad aspects of functioning, including work participation, social participation, and caregiver burden, which researchers should consider when designing chronic pain clinical trials. Investigators should consider the inclusion of both PROs and performance-based measures as they provide different but also important complementary information. The development and use of reliable and valid PROs and performance-based measures of physical functioning may expedite development of treatments, and standardization of these measures has the potential to facilitate comparison across studies. We provide recommendations regarding important domains to stimulate research to develop tools that are more robust, address consistency and standardization, and engage patients early in tool development.
On summary measure analysis of linear trend repeated measures data: performance comparison with two competing methods.

PubMed

Vossoughi, Mehrdad; Ayatollahi, S M T; Towhidi, Mina; Ketabchi, Farzaneh

2012-03-22

The summary measure approach (SMA) is sometimes the only applicable tool for the analysis of repeated measurements in medical research, especially when the number of measurements is relatively large. This study aimed to describe techniques based on summary measures for the analysis of linear trend repeated measures data and then to compare performances of SMA, linear mixed model (LMM), and unstructured multivariate approach (UMA). Practical guidelines based on the least squares regression slope and mean of response over time for each subject were provided to test time, group, and interaction effects. Through Monte Carlo simulation studies, the efficacy of SMA vs. LMM and traditional UMA, under different types of covariance structures, was illustrated. All the methods were also employed to analyze two real data examples. Based on the simulation and example results, it was found that the SMA completely dominated the traditional UMA and performed convincingly close to the best-fitting LMM in testing all the effects. However, the LMM was not often robust and led to non-sensible results when the covariance structure for errors was misspecified. The results emphasized discarding the UMA which often yielded extremely conservative inferences as to such data. It was shown that summary measure is a simple, safe and powerful approach in which the loss of efficiency compared to the best-fitting LMM was generally negligible. The SMA is recommended as the first choice to reliably analyze the linear trend data with a moderate to large number of measurements and/or small to moderate sample sizes.
Classification of clinically useful sentences in clinical evidence resources.

PubMed

Morid, Mohammad Amin; Fiszman, Marcelo; Raja, Kalpana; Jonnalagadda, Siddhartha R; Del Fiol, Guilherme

2016-04-01

Most patient care questions raised by clinicians can be answered by online clinical knowledge resources. However, important barriers still challenge the use of these resources at the point of care. To design and assess a method for extracting clinically useful sentences from synthesized online clinical resources that represent the most clinically useful information for directly answering clinicians' information needs. We developed a Kernel-based Bayesian Network classification model based on different domain-specific feature types extracted from sentences in a gold standard composed of 18 UpToDate documents. These features included UMLS concepts and their semantic groups, semantic predications extracted by SemRep, patient population identified by a pattern-based natural language processing (NLP) algorithm, and cue words extracted by a feature selection technique. Algorithm performance was measured in terms of precision, recall, and F-measure. The feature-rich approach yielded an F-measure of 74% versus 37% for a feature co-occurrence method (p<0.001). Excluding predication, population, semantic concept or text-based features reduced the F-measure to 62%, 66%, 58% and 69% respectively (p<0.01). The classifier applied to Medline sentences reached an F-measure of 73%, which is equivalent to the performance of the classifier on UpToDate sentences (p=0.62). The feature-rich approach significantly outperformed general baseline methods. This approach significantly outperformed classifiers based on a single type of feature. Different types of semantic features provided a unique contribution to overall classification performance. The classifier's model and features used for UpToDate generalized well to Medline abstracts. Copyright © 2016 Elsevier Inc. All rights reserved.
Relationship between physical fitness at the end of pre-season and the in-season game performance in Japanese female professional baseball players.

PubMed

Watanabe, Yuya; Yamada, Yosuke; Yoshida, Tsukasa; Matsui, Tomoyuki; Seo, Kazuya; Azuma, Yoshikazu; Hiramoto, Machiko; Miura, Yuichiro; Fukushima, Hideaki; Shimazu, Akito; Eto, Toshiaki; Saotome, Homare; Kida, Noriyuki; Morihara, Toru

2017-10-30

This study examined anthropometric and fitness profiles of Japanese female professional baseball players and investigated the relationship between players' physical fitness and in-season game performance. Fifty-seven players who were registered in the Japan Women's Baseball League (JWBL) participated. Height, weight, grip strength, back strength, knee-extension and -flexion strength, hamstring extensibility, vertical jump height, and horizontal jump distance were measured at pre-season (February and March) in 2013. Game performance during the 2013 season (March to November) was obtained from official JWBL statistics. Vertical jump height showed significant positive correlations with individual performance records [e.g., total bases (r = 0.551), slugging percentage (r = 0.459), and stolen bases (r = 0.442)]. Similar relationships were observed between horizontal jump distance and performance statistics in most cases. In contrast, grip, back, and lower-limb strength, and hamstring extensibility were not significantly correlated with game performance. Stepwise regression analysis selected vertical jump height as an independent variable, significantly correlating with several game performance measures (e.g., total bases: adjusted R = 0.257). Also, vertical jump height and body mass index were identified as independent variables significantly associated with stolen bases (adjusted R = 0.251). Maximal jump performance, rather than simple isometric muscle strength or flexibility, is a good performance test that can be used at the end of pre-season to predict in-season batting and stolen base performance. Our findings demonstrate the importance of constructing pre-season training programs to enhance lower-limb muscular power that is linked to successful in-season performance in female baseball players.
DEEP: A Database of Energy Efficiency Performance to Accelerate Energy Retrofitting of Commercial Buildings

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hoon Lee, Sang; Hong, Tianzhen; Sawaya, Geof

The paper presents a method and process to establish a database of energy efficiency performance (DEEP) to enable quick and accurate assessment of energy retrofit of commercial buildings. DEEP was compiled from results of about 35 million EnergyPlus simulations. DEEP provides energy savings for screening and evaluation of retrofit measures targeting the small and medium-sized office and retail buildings in California. The prototype building models are developed for a comprehensive assessment of building energy performance based on DOE commercial reference buildings and the California DEER prototype buildings. The prototype buildings represent seven building types across six vintages of constructions andmore » 16 California climate zones. DEEP uses these prototypes to evaluate energy performance of about 100 energy conservation measures covering envelope, lighting, heating, ventilation, air-conditioning, plug-loads, and domestic hot water. DEEP consists the energy simulation results for individual retrofit measures as well as packages of measures to consider interactive effects between multiple measures. The large scale EnergyPlus simulations are being conducted on the super computers at the National Energy Research Scientific Computing Center of Lawrence Berkeley National Laboratory. The pre-simulation database is a part of an on-going project to develop a web-based retrofit toolkit for small and medium-sized commercial buildings in California, which provides real-time energy retrofit feedback by querying DEEP with recommended measures, estimated energy savings and financial payback period based on users’ decision criteria of maximizing energy savings, energy cost savings, carbon reduction, or payback of investment. The pre-simulated database and associated comprehensive measure analysis enhances the ability to performance assessments of retrofits to reduce energy use for small and medium buildings and business owners who typically do not have resources to conduct costly building energy audit. DEEP will be migrated into the DEnCity - DOE’s Energy City, which integrates large-scale energy data for multi-purpose, open, and dynamic database leveraging diverse source of existing simulation data.« less
Retroreflectors for transmissometers

NASA Astrophysics Data System (ADS)

Kruglov, R. A.

A comparative analysis of the performance characteristics of two principal types of retroreflectors is carried out using data in the literature and experience gained in working with RDV and FI-I transmissometers. In particular, it is noted that the advantages of cat's-eye retroreflectors are their simplicity and the possibility of using the same reflector configuration for different measurement bases. With certain refinements, the performance of cat's-eye retroreflectoemeters can be superior to that of triple-prism retroreflectometers. The latter are recommended for use for large measurement bases (in excess of 100 meters).

Estimation of 1RM for knee extension based on the maximal isometric muscle strength and body composition.

PubMed

Kanada, Yoshikiyo; Sakurai, Hiroaki; Sugiura, Yoshito; Arai, Tomoaki; Koyama, Soichiro; Tanabe, Shigeo

2017-11-01

[Purpose] To create a regression formula in order to estimate 1RM for knee extensors, based on the maximal isometric muscle strength measured using a hand-held dynamometer and data regarding the body composition. [Subjects and Methods] Measurement was performed in 21 healthy males in their twenties to thirties. Single regression analysis was performed, with measurement values representing 1RM and the maximal isometric muscle strength as dependent and independent variables, respectively. Furthermore, multiple regression analysis was performed, with data regarding the body composition incorporated as another independent variable, in addition to the maximal isometric muscle strength. [Results] Through single regression analysis with the maximal isometric muscle strength as an independent variable, the following regression formula was created: 1RM (kg)=0.714 + 0.783 × maximal isometric muscle strength (kgf). On multiple regression analysis, only the total muscle mass was extracted. [Conclusion] A highly accurate regression formula to estimate 1RM was created based on both the maximal isometric muscle strength and body composition. Using a hand-held dynamometer and body composition analyzer, it was possible to measure these items in a short time, and obtain clinically useful results.
Project Loon based augmentation for global ionospheric modeling over Southern Hemisphere

NASA Astrophysics Data System (ADS)

Wang, Cheng; Shi, Chuang; Zhang, Hongping

2017-04-01

Global ionospheric products of vertical total electron content (VTEC) derived from GNSS measurements may have low accuracy over oceans and southern latitudes where there are not rich observations. Project Loon provides a great opportunity to enhance the measurements over those areas. In this contribution, a simulation of Project Loon based augmentation for global ionospheric modeling is performed by using the international reference ionosphere (IRI) which could simulate VTEC measurements for the balloons. The performance of the enhanced method based on simulation of Project Loon is investigated by comparing with VTEC maps from Ionosphere Associate Analysis Centers (IAACs) as well as IGS final GIMs. The comparison indicates that there is a better consistency between the VTEC maps by the enhanced method and IGS final GIMs. Also, obvious improvements of RMS maps in GIMs for the middle latitudes and southern latitudes are enabled by the augmentation of Project Loon. Additionally, JASON data are used to validate the specific improvement of the VTEC maps. The results show that the performance of VTEC maps is improved slightly, especially in southern latitudes. It is possible that the VTEC maps could be improved significantly by using real GPS measurements from balloons of Project Loon in the near future.
Project Loon based augmentation for global ionospheric modeling over Southern Hemisphere.

PubMed

Wang, Cheng; Shi, Chuang; Zhang, Hongping

2017-04-06

Global ionospheric products of vertical total electron content (VTEC) derived from GNSS measurements may have low accuracy over oceans and southern latitudes where there are not rich observations. Project Loon provides a great opportunity to enhance the measurements over those areas. In this contribution, a simulation of Project Loon based augmentation for global ionospheric modeling is performed by using the international reference ionosphere (IRI) which could simulate VTEC measurements for the balloons. The performance of the enhanced method based on simulation of Project Loon is investigated by comparing with VTEC maps from Ionosphere Associate Analysis Centers (IAACs) as well as IGS final GIMs. The comparison indicates that there is a better consistency between the VTEC maps by the enhanced method and IGS final GIMs. Also, obvious improvements of RMS maps in GIMs for the middle latitudes and southern latitudes are enabled by the augmentation of Project Loon. Additionally, JASON data are used to validate the specific improvement of the VTEC maps. The results show that the performance of VTEC maps is improved slightly, especially in southern latitudes. It is possible that the VTEC maps could be improved significantly by using real GPS measurements from balloons of Project Loon in the near future.
Project Loon based augmentation for global ionospheric modeling over Southern Hemisphere

PubMed Central

Wang, Cheng; Shi, Chuang; Zhang, Hongping

2017-01-01

Global ionospheric products of vertical total electron content (VTEC) derived from GNSS measurements may have low accuracy over oceans and southern latitudes where there are not rich observations. Project Loon provides a great opportunity to enhance the measurements over those areas. In this contribution, a simulation of Project Loon based augmentation for global ionospheric modeling is performed by using the international reference ionosphere (IRI) which could simulate VTEC measurements for the balloons. The performance of the enhanced method based on simulation of Project Loon is investigated by comparing with VTEC maps from Ionosphere Associate Analysis Centers (IAACs) as well as IGS final GIMs. The comparison indicates that there is a better consistency between the VTEC maps by the enhanced method and IGS final GIMs. Also, obvious improvements of RMS maps in GIMs for the middle latitudes and southern latitudes are enabled by the augmentation of Project Loon. Additionally, JASON data are used to validate the specific improvement of the VTEC maps. The results show that the performance of VTEC maps is improved slightly, especially in southern latitudes. It is possible that the VTEC maps could be improved significantly by using real GPS measurements from balloons of Project Loon in the near future. PMID:28383058
Post Pareto optimization-A case

NASA Astrophysics Data System (ADS)

Popov, Stoyan; Baeva, Silvia; Marinova, Daniela

2017-12-01

Simulation performance may be evaluated according to multiple quality measures that are in competition and their simultaneous consideration poses a conflict. In the current study we propose a practical framework for investigating such simulation performance criteria, exploring the inherent conflicts amongst them and identifying the best available tradeoffs, based upon multi-objective Pareto optimization. This approach necessitates the rigorous derivation of performance criteria to serve as objective functions and undergo vector optimization. We demonstrate the effectiveness of our proposed approach by applying it with multiple stochastic quality measures. We formulate performance criteria of this use-case, pose an optimization problem, and solve it by means of a simulation-based Pareto approach. Upon attainment of the underlying Pareto Frontier, we analyze it and prescribe preference-dependent configurations for the optimal simulation training.
Identifying and ranking influential spreaders in complex networks by combining a local-degree sum and the clustering coefficient

NASA Astrophysics Data System (ADS)

Li, Mengtian; Zhang, Ruisheng; Hu, Rongjing; Yang, Fan; Yao, Yabing; Yuan, Yongna

2018-03-01

Identifying influential spreaders is a crucial problem that can help authorities to control the spreading process in complex networks. Based on the classical degree centrality (DC), several improved measures have been presented. However, these measures cannot rank spreaders accurately. In this paper, we first calculate the sum of the degrees of the nearest neighbors of a given node, and based on the calculated sum, a novel centrality named clustered local-degree (CLD) is proposed, which combines the sum and the clustering coefficients of nodes to rank spreaders. By assuming that the spreading process in networks follows the susceptible-infectious-recovered (SIR) model, we perform extensive simulations on a series of real networks to compare the performances between the CLD centrality and other six measures. The results show that the CLD centrality has a competitive performance in distinguishing the spreading ability of nodes, and exposes the best performance to identify influential spreaders accurately.
Rebreathed air as a reference for breath-alcohol testers

DOT National Transportation Integrated Search

1975-01-01

A technique has been devised for a reference measurement of the performance of breath-alcohol measuring instruments directly from the respiratory system. It is shown that this technique is superior and simpler than comparison measurements based on bl...
High-speed real-time heterodyne interferometry using software-defined radio.

PubMed

Riobo, L M; Veiras, F E; Gonzalez, M G; Garea, M T; Sorichetti, P A

2018-01-10

This paper describes the design and performance of a phase demodulation scheme based on software-defined radio (SDR), applied in heterodyne interferometry. The phase retrieval is performed in real time by means of a low-cost SDR with a wideband optoelectronic front-end. Compared to other demodulation schemes, the system is quite simpler, versatile, and of lower cost. The performance of the demodulator is demonstrated by measuring the displacement per volt of a thin-film polymeric piezoelectric transducer based on polyvinylidene fluoride for ultrasonic applications. We measured displacements between 3.5 pm and 122 pm with 7% relative uncertainty, in the frequency range from 20 kHz to 1 MHz.
Can an Inquiry Approach Improve College Student Learning in a Teaching Laboratory?

ERIC Educational Resources Information Center

Rissing, Steven W.; Cogan, John G.

2009-01-01

We present an inquiry-based, hands-on laboratory exercise on enzyme activity for an introductory college biology course for science majors. We measure student performance on a series of objective and subjective questions before and after completion of this exercise; we also measure performance of a similar cohort of students before and after…
Robust Multimodal Cognitive Load Measurement

DTIC Science & Technology

2014-03-26

dimension, Hurst exponent ) of electroencephalogram (EEG) signals to evaluate changes in working memory load during the performance of a cognitive task...dimension, Hurst exponent ) of electroencephalogram (EEG) signals to evaluate changes in working memory load during the performance of a cognitive task with...approximate entropies, wavelet-based complexity measures, correlation dimension, Hurst exponent ) of electroencephalogram (EEG) signals to evaluate changes
Age differences in cognitive performance in later life: relationships to self-reported health and activity life style.

PubMed

Hultsch, D F; Hammer, M; Small, B J

1993-01-01

The predictive relationships among individual differences in self-reported physical health and activity life style and performance on an array of information processing and intellectual ability measures were examined. A sample of 484 men and women aged 55 to 86 years completed a battery of cognitive tasks measuring verbal processing time, working memory, vocabulary, verbal fluency, world knowledge, word recall, and text recall. Hierarchical regression was used to predict performance on these tasks from measures of self-reported physical health, alcohol and tobacco use, and level of participation in everyday activities. The results indicated: (a) individual differences in self-reported health and activity predicted performance on multiple cognitive measures; (b) self-reported health was more predictive of processing resource variables than knowledge-based abilities; (c) interaction effects indicated that participation in cognitively demanding activities was more highly related to performance on some measures for older adults than for middle-aged adults; and (d) age-related differences in performance on multiple measures were attenuated by partialing individual differences in self-reported health and activity.
Society for Academic Continuing Medical Education Intervention Guideline Series: Guideline 1, Performance Measurement and Feedback.

PubMed

Van Hoof, Thomas J; Grant, Rachel E; Miller, Nicole E; Bell, Mary; Campbell, Craig; Colburn, Lois; Davis, David; Dorman, Todd; Horsley, Tanya; Jacobs-Halsey, Virginia; Kane, Gabrielle; LeBlanc, Constance; Lockyer, Jocelyn; Moore, Donald E; Morrow, Robert; Olson, Curtis A; Silver, Ivan; Thomas, David C; Kitto, Simon

2015-01-01

The Society for Academic Continuing Medical Education commissioned a study to clarify and, if possible, to standardize the terminology for a set of important educational interventions. In the form of a guideline, this article describes one such intervention, performance measurement and feedback, which is a common intervention in health professions education. In the form of a summary report, performance measurement and feedback is an opportunity for clinicians to view data about the care they provide compared with some standard and often with peer and benchmark comparisons. Based on a review of recent evidence and a facilitated discussion with the US and Canadian experts, we describe proper terminology for performance measurement and feedback and other important information about the intervention. We encourage leaders and researchers to consider and build on this guideline as they plan, implement, evaluate, and report efforts with performance measurement and feedback. Clear and consistent use of terminology is imperative, along with complete and accurate descriptions of interventions, to improve the use and study of performance measurement and feedback.
Assessment of Age-Related Differences in Functional Capacity Using the Virtual Reality Functional Capacity Assessment Tool (VRFCAT)

PubMed Central

Atkins, A.S.; Stroescu, I.; Spagnola, N.B.; Davis, V.G.; Patterson, T.D.; Narasimhan, M.; Harvey, P.D.; Keefe, R.S.E.

2015-01-01

Clinical trials for primary prevention and early intervention in preclinical AD require measures of functional capacity with improved sensitivity to deficits in healthier, non-demented individuals. To this end, the Virtual Reality Functional Capacity Assessment Tool (VRFCAT) was developed as a direct performance-based assessment of functional capacity that is sensitive to changes in function across multiple populations. Using a realistic virtual reality environment, the VRFCAT assesses a subject's ability to complete instrumental activities associated with a shopping trip. The present investigation represents an initial evaluation of the VRFCAT as a potential co-primary measure of functional capacity in healthy aging and preclinical MCI/AD by examining test-retest reliability and associations with cognitive performance in healthy young and older adults. The VRFCAT was compared and contrasted with the UPSA-2-VIM, a traditional performance-based assessment utilizing physical props. Results demonstrated strong age-related differences in performance on each VRFCAT outcome measure, including total completion time, total errors, and total forced progressions. VRFCAT performance showed strong correlations with cognitive performance across both age groups. VRFCAT Total Time demonstrated good test-retest reliability (ICC=.80 in young adults; ICC=.64 in older adults) and insignificant practice effects, indicating the measure is suitable for repeated testing in healthy populations. Taken together, these results provide preliminary support for the VRFCAT as a potential measure of functionally relevant change in primary prevention and preclinical AD/MCI trials. PMID:26618145
Assessing the welfare of laboratory mice in their home environment using animal-based measures--a benchmarking tool.

PubMed

Spangenberg, Elin M F; Keeling, Linda J

2016-02-01

Welfare problems in laboratory mice can be a consequence of an ongoing experiment, or a characteristic of a particular genetic line, but in some cases, such as breeding animals, they are most likely to be a result of the design and management of the home cage. Assessment of the home cage environment is commonly performed using resource-based measures, like access to nesting material. However, animal-based measures (related to the health status and behaviour of the animals) can be used to assess the current welfare of animals regardless of the inputs applied (i.e. the resources or management). The aim of this study was to design a protocol for assessing the welfare of laboratory mice using only animal-based measures. The protocol, to be used as a benchmarking tool, assesses mouse welfare in the home cage and does not contain parameters related to experimental situations. It is based on parameters corresponding to the 12 welfare criteria established by the Welfare Quality® project. Selection of animal-based measures was performed by scanning existing published, web-based and informal protocols, and by choosing parameters that matched these criteria, were feasible in practice and, if possible, were already validated indicators of mouse welfare. The parameters should identify possible animal welfare problems and enable assessment directly in an animal room during cage cleaning procedures, without the need for extra equipment. Thermal comfort behaviours and positive emotional states are areas where more research is needed to find valid, reliable and feasible animal-based measures. © The Author(s) 2015.
Survey of Motion Tracking Methods Based on Inertial Sensors: A Focus on Upper Limb Human Motion

PubMed Central

Filippeschi, Alessandro; Schmitz, Norbert; Miezal, Markus; Bleser, Gabriele; Ruffaldi, Emanuele; Stricker, Didier

2017-01-01

Motion tracking based on commercial inertial measurements units (IMUs) has been widely studied in the latter years as it is a cost-effective enabling technology for those applications in which motion tracking based on optical technologies is unsuitable. This measurement method has a high impact in human performance assessment and human-robot interaction. IMU motion tracking systems are indeed self-contained and wearable, allowing for long-lasting tracking of the user motion in situated environments. After a survey on IMU-based human tracking, five techniques for motion reconstruction were selected and compared to reconstruct a human arm motion. IMU based estimation was matched against motion tracking based on the Vicon marker-based motion tracking system considered as ground truth. Results show that all but one of the selected models perform similarly (about 35 mm average position estimation error). PMID:28587178
Performance and non-destructive evaluation methods of airborne radome and stealth structures

NASA Astrophysics Data System (ADS)

Panwar, Ravi; Ryul Lee, Jung

2018-06-01

In the past few years, great effort has been devoted to the fabrication of highly efficient, broadband radome and stealth (R&S) structures for distinct control, guidance, surveillance and communication applications for airborne platforms. The evaluation of non-planar aircraft R&S structures in terms of their electromagnetic performance and structural damage is still a very challenging task. In this article, distinct measurement techniques are discussed for the electromagnetic performance and non-destructive evaluation (NDE) of R&S structures. This paper deals with an overview of the transmission line method and free space measurement based microwave measurement techniques for the electromagnetic performance evaluation of R&S structures. In addition, various conventional as well as advanced methods, such as millimetre and terahertz wave based imaging techniques with great potential for NDE of load bearing R&S structures, are also discussed in detail. A glimpse of in situ NDE techniques with corresponding experimental setup for R&S structures is also presented. The basic concepts, measurement ranges and their instrumentation, measurement method of different R&S structures and some miscellaneous topics are discussed in detail. Some of the challenges and issues pertaining to the measurement of curved R&S structures are also presented. This study also lists various mathematical models and analytical techniques for the electromagnetic performance evaluation and NDE of R&S structures. The research directions described in this study may be of interest to the scientific community in the aerospace sectors.
Design, implementation, and psychometric analysis of a scoring instrument for simulated pediatric resuscitation: a report from the EXPRESS pediatric investigators.

PubMed

Donoghue, Aaron; Ventre, Kathleen; Boulet, John; Brett-Fleegler, Marisa; Nishisaki, Akira; Overly, Frank; Cheng, Adam

2011-04-01

Robustly tested instruments for quantifying clinical performance during pediatric resuscitation are lacking. Examining Pediatric Resuscitation Education through Simulation and Scripting Collaborative was established to conduct multicenter trials of simulation education in pediatric resuscitation, evaluating performance with multiple instruments, one of which is the Clinical Performance Tool (CPT). We hypothesize that the CPT will measure clinical performance during simulated pediatric resuscitation in a reliable and valid manner. Using a pediatric resuscitation scenario as a basis, a scoring system was designed based on Pediatric Advanced Life Support algorithms comprising 21 tasks. Each task was scored as follows: task not performed (0 points); task performed partially, incorrectly, or late (1 point); and task performed completely, correctly, and within the recommended time frame (2 points). Study teams at 14 children's hospitals went through the scenario twice (PRE and POST) with an interposed 20-minute debriefing. Both scenarios for each of eight study teams were scored by multiple raters. A generalizability study, based on the PRE scores, was conducted to investigate the sources of measurement error in the CPT total scores. Inter-rater reliability was estimated based on the variance components. Validity was assessed by repeated measures analysis of variance comparing PRE and POST scores. Sixteen resuscitation scenarios were reviewed and scored by seven raters. Inter-rater reliability for the overall CPT score was 0.63. POST scores were found to be significantly improved compared with PRE scores when controlled for within-subject covariance (F1,15 = 4.64, P < 0.05). The variance component ascribable to rater was 2.4%. Reliable and valid measures of performance in simulated pediatric resuscitation can be obtained from the CPT. Future studies should examine the applicability of trichotomous scoring instruments to other clinical scenarios, as well as performance during actual resuscitations.
Mobile Phone-Based Measures of Activity, Step Count, and Gait Speed: Results From a Study of Older Ambulatory Adults in a Naturalistic Setting

PubMed Central

Aung, Thawda; Whittington, Jackie; High, Robin R; Goulding, Evan H; Schenk, A Katrin

2017-01-01

Background Cellular mobile telephone technology shows much promise for delivering and evaluating healthcare interventions in cost-effective manners with minimal barriers to access. There is little data demonstrating that these devices can accurately measure clinically important aspects of individual functional status in naturalistic environments outside of the laboratory. Objective The objective of this study was to demonstrate that data derived from ubiquitous mobile phone technology, using algorithms developed and previously validated by our lab in a controlled setting, can be employed to continuously and noninvasively measure aspects of participant (subject) health status including step counts, gait speed, and activity level, in a naturalistic community setting. A second objective was to compare our mobile phone-based data against current standard survey-based gait instruments and clinical physical performance measures in order to determine whether they measured similar or independent constructs. Methods A total of 43 ambulatory, independently dwelling older adults were recruited from Nebraska Medicine, including 25 (58%, 25/43) healthy control individuals from our Engage Wellness Center and 18 (42%, 18/43) functionally impaired, cognitively intact individuals (who met at least 3 of 5 criteria for frailty) from our ambulatory Geriatrics Clinic. The following previously-validated surveys were obtained on study day 1: (1) Late Life Function and Disability Instrument (LLFDI); (2) Survey of Activities and Fear of Falling in the Elderly (SAFFE); (3) Patient Reported Outcomes Measurement Information System (PROMIS), short form version 1.0 Physical Function 10a (PROMIS-PF); and (4) PROMIS Global Health, short form version 1.1 (PROMIS-GH). In addition, clinical physical performance measurements of frailty (10 foot Get up and Go, 4 Meter walk, and Figure-of-8 Walk [F8W]) were also obtained. These metrics were compared to our mobile phone-based metrics collected from the participants in the community over a 24-hour period occurring within 1 week of the initial assessment. Results We identified statistically significant differences between functionally intact and frail participants in mobile phone-derived measures of percent activity (P=.002, t test), active versus inactive status (P=.02, t test), average step counts (P<.001, repeated measures analysis of variance [ANOVA]) and gait speed (P<.001, t test). In functionally intact individuals, the above mobile phone metrics assessed aspects of functional status independent (Bland-Altman and correlation analysis) of both survey- and/or performance battery-based functional measures. In contrast, in frail individuals, the above mobile phone metrics correlated with submeasures of both SAFFE and PROMIS-GH. Conclusions Continuous mobile phone-based measures of participant community activity and mobility strongly differentiate between persons with intact functional status and persons with a frailty phenotype. These measures assess dimensions of functional status independent of those measured using current validated questionnaires and physical performance assessments to identify functional compromise. Mobile phone-based gait measures may provide a more readily accessible and less-time consuming measure of gait, while further providing clinicians with longitudinal gait measures that are currently difficult to obtain. PMID:28974482
The BepiColombo Laser Altimeter (BELA): Scientific Performance at Mercury

NASA Astrophysics Data System (ADS)

Hussmann, H.; Steinbrügge, G.; Stark, A.; Oberst, J.; Thomas, N.; Lara, L.-M.

2018-05-01

We discuss the expected scientific performance of BELA in Mercury orbit. Based on a performance model, we present the measurement accuracy of global and local topography, surface slopes and roughness, as well as the tidal Love number h2.
48 CFR 970.1100-1 - Performance-based contracting.

Code of Federal Regulations, 2012 CFR

2012-10-01

... methods of accomplishing the work; use measurable (i.e., terms of quality, timeliness, quantity) performance standards and objectives and quality assurance surveillance plans; provide performance incentives... work and other documents used to establish work requirements. (d) Quality assurance surveillance plans...

48 CFR 970.1100-1 - Performance-based contracting.

Code of Federal Regulations, 2014 CFR

2014-10-01

... methods of accomplishing the work; use measurable (i.e., terms of quality, timeliness, quantity) performance standards and objectives and quality assurance surveillance plans; provide performance incentives... work and other documents used to establish work requirements. (d) Quality assurance surveillance plans...
48 CFR 970.1100-1 - Performance-based contracting.

Code of Federal Regulations, 2013 CFR

2013-10-01

... methods of accomplishing the work; use measurable (i.e., terms of quality, timeliness, quantity) performance standards and objectives and quality assurance surveillance plans; provide performance incentives... work and other documents used to establish work requirements. (d) Quality assurance surveillance plans...
A Simulation-Based Approach for Teaching the Systems Perspective of Strategic Performance Management

ERIC Educational Resources Information Center

Capelo, Carlos; Lopes, Ana; Mata, Ana

2015-01-01

Kaplan and Norton introduced the balanced scorecard (BSC), which is based on a systems perspective of the business strategy and performance measurement. Many organisations around the world use the BSC to define, implement and manage strategy. Nevertheless, there are studies that identify problems and limitations associated with the implementation…
Specifying and Refining a Measurement Model for a Simulation-Based Assessment. CSE Report 619.

ERIC Educational Resources Information Center

Levy, Roy; Mislevy, Robert J.

2004-01-01

The challenges of modeling students' performance in simulation-based assessments include accounting for multiple aspects of knowledge and skill that arise in different situations and the conditional dependencies among multiple aspects of performance in a complex assessment. This paper describes a Bayesian approach to modeling and estimating…
Quantifying the cognitive cost of laparo-endoscopic single-site surgeries: Gaze-based indices.

PubMed

Di Stasi, Leandro L; Díaz-Piedra, Carolina; Ruiz-Rabelo, Juan Francisco; Rieiro, Héctor; Sanchez Carrion, Jose M; Catena, Andrés

2017-11-01

Despite the growing interest concerning the laparo-endoscopic single-site surgery (LESS) procedure, LESS presents multiple difficulties and challenges that are likely to increase the surgeon's cognitive cost, in terms of both cognitive load and performance. Nevertheless, there is currently no objective index capable of assessing the surgeon cognitive cost while performing LESS. We assessed if gaze-based indices might offer unique and unbiased measures to quantify LESS complexity and its cognitive cost. We expect that the assessment of surgeon's cognitive cost to improve patient safety by measuring fitness-for-duty and reducing surgeons overload. Using a wearable eye tracker device, we measured gaze entropy and velocity of surgical trainees and attending surgeons during two surgical procedures (LESS vs. multiport laparoscopy surgery [MPS]). None of the participants had previous experience with LESS. They performed two exercises with different complexity levels (Low: Pattern Cut vs. High: Peg Transfer). We also collected performance and subjective data. LESS caused higher cognitive demand than MPS, as indicated by increased gaze entropy in both surgical trainees and attending surgeons (exploration pattern became more random). Furthermore, gaze velocity was higher (exploration pattern became more rapid) for the LESS procedure independently of the surgeon's expertise. Perceived task complexity and laparoscopic accuracy confirmed gaze-based results. Gaze-based indices have great potential as objective and non-intrusive measures to assess surgeons' cognitive cost and fitness-for-duty. Furthermore, gaze-based indices might play a relevant role in defining future guidelines on surgeons' examinations to mark their achievements during the entire training (e.g. analyzing surgical learning curves). Copyright © 2017 Elsevier Ltd. All rights reserved.
Development of a Monte Carlo Simulation for APD-Based PET Detectors Using a Continuous Scintillating Crystal

NASA Astrophysics Data System (ADS)

Clowes, P.; Mccallum, S.; Welch, A.

2006-10-01

We are currently developing a multilayer avalanche photodiode (APD)-based detector for use in positron emission tomography (PET), which utilizes thin continuous crystals. In this paper, we developed a Monte Carlo-based simulation to aid in the design of such detectors. We measured the performance of a detector comprising a single thin continuous crystal (3.1 mm times 9.5 mm times 9.5 mm) of lutetium yttrium ortho-silicate (LYSO) and an APD array (4times4) elements; each element 1.6 mm2 and on a 2.3 mm pitch. We showed that a spatial resolution of better than 2.12 mm is achievable throughout the crystal provided that we adopt a Statistics Based Positioning (SBP) Algorithm. We then used Monte Carlo simulation to model the behavior of the detector. The accuracy of the Monte Carlo simulation was verified by comparing measured and simulated parent datasets (PDS) for the SBP algorithm. These datasets consisted of data for point sources at 49 positions uniformly distributed over the detector area. We also calculated the noise in the detector circuit and verified this value by measurement. The noise value was included in the simulation. We show that the performance of the simulation closely matches the measured performance. The simulations were extended to investigate the effect of different noise levels on positioning accuracy. This paper showed that if modest improvements could be made in the circuit noise then positioning accuracy would be greatly improved. In summary, we have developed a model that can be used to simulate the performance of a variety of APD-based continuous crystal PET detectors
Versatile light-emitting-diode-based spectral response measurement system for photovoltaic device characterization.

PubMed

Hamadani, Behrang H; Roller, John; Dougherty, Brian; Yoon, Howard W

2012-07-01

An absolute differential spectral response measurement system for solar cells is presented. The system couples an array of light emitting diodes with an optical waveguide to provide large area illumination. Two unique yet complementary measurement methods were developed and tested with the same measurement apparatus. Good agreement was observed between the two methods based on testing of a variety of solar cells. The first method is a lock-in technique that can be performed over a broad pulse frequency range. The second method is based on synchronous multifrequency optical excitation and electrical detection. An innovative scheme for providing light bias during each measurement method is discussed.
DOE Office of Scientific and Technical Information (OSTI.GOV)

Cabrera-Palmer, Belkis

Predicting the performance of radiation detection systems at field sites based on measured performance acquired under controlled conditions at test locations, e.g., the Nevada National Security Site (NNSS), remains an unsolved and standing issue within DNDO’s testing methodology. Detector performance can be defined in terms of the system’s ability to detect and/or identify a given source or set of sources, and depends on the signal generated by the detector for the given measurement configuration (i.e., source strength, distance, time, surrounding materials, etc.) and on the quality of the detection algorithm. Detector performance is usually evaluated in the performance and operationalmore » testing phases, where the measurement configurations are selected to represent radiation source and background configurations of interest to security applications.« less
Performance of a distributed simultaneous strain and temperature sensor based on a Fabry-Perot laser diode and a dual-stage FBG optical demultiplexer.

PubMed

Kim, Suhwan; Kwon, Hyungwoo; Yang, Injae; Lee, Seungho; Kim, Jeehyun; Kang, Shinwon

2013-11-12

A simultaneous strain and temperature measurement method using a Fabry-Perot laser diode (FP-LD) and a dual-stage fiber Bragg grating (FBG) optical demultiplexer was applied to a distributed sensor system based on Brillouin optical time domain reflectometry (BOTDR). By using a Kalman filter, we improved the performance of the FP-LD based OTDR, and decreased the noise using the dual-stage FBG optical demultiplexer. Applying the two developed components to the BOTDR system and using a temperature compensating algorithm, we successfully demonstrated the simultaneous measurement of strain and temperature distributions under various experimental conditions. The observed errors in the temperature and strain measured using the developed sensing system were 0.6 °C and 50 με, and the spatial resolution was 1 m, respectively.
Modeling and experimental study on near-field acoustic levitation by flexural mode.

PubMed

Liu, Pinkuan; Li, Jin; Ding, Han; Cao, Wenwu

2009-12-01

Near-field acoustic levitation (NFAL) has been used in noncontact handling and transportation of small objects to avoid contamination. We have performed a theoretical analysis based on nonuniform vibrating surface to quantify the levitation force produced by the air film and also conducted experimental tests to verify our model. Modal analysis was performed using ANSYS on the flexural plate radiator to obtain its natural frequency of desired mode, which is used to design the measurement system. Then, the levitation force was calculated as a function of levitation distance based on squeeze gas film theory using measured amplitude and phase distributions on the vibrator surface. Compared with previous fluid-structural analyses using a uniform piston motion, our model based on the nonuniform radiating surface of the vibrator is more realistic and fits better with experimentally measured levitation force.
Cognitive Orientation to (daily) Occupational Performance (CO-OP) with children with Asperger's syndrome who have motor-based occupational performance goals.

PubMed

Rodger, Sylvia; Brandenburg, Julia

2009-02-01

Motor difficulties associated with Asperger's syndrome (AS) are commonly reported, despite these not being diagnostically significant. Cognitive Orientation to daily Occupational Performance (CO-OP) is a verbal problem-solving intervention developed for use with children with developmental coordination disorder to address their motor-based difficulties. This paper reports on two case studies of children with AS illustrating the outcomes of CO-OP to address motor-based occupational performance goals. A case study approach was used to document how two children with AS engaged in 10 weekly sessions of CO-OP addressing child-chosen motor-based occupational performance goals and the outcomes of this intervention. Pre and post-intervention assessment using the Canadian Occupational Performance Measure, Vineland Adaptive Behaviour Scales and the Performance Quality Rating Scale indicated that both children were able to engage in CO-OP intervention to successfully improve their occupational performance. Further research into the application of CO-OP with children with AS is warranted based on preliminary positive findings regarding the efficacy of this intervention to address motor-based performance difficulties in two children with AS.
Quantitative computed tomography-based predictions of vertebral strength in anterior bending.

PubMed

Buckley, Jenni M; Cheng, Liu; Loo, Kenneth; Slyfield, Craig; Xu, Zheng

2007-04-20

This study examined the ability of QCT-based structural assessment techniques to predict vertebral strength in anterior bending. The purpose of this study was to compare the abilities of QCT-based bone mineral density (BMD), mechanics of solids models (MOS), e.g., bending rigidity, and finite element analyses (FE) to predict the strength of isolated vertebral bodies under anterior bending boundary conditions. Although the relative performance of QCT-based structural measures is well established for uniform compression, the ability of these techniques to predict vertebral strength under nonuniform loading conditions has not yet been established. Thirty human thoracic vertebrae from 30 donors (T9-T10, 20 female, 10 male; 87 +/- 5 years of age) were QCT scanned and destructively tested in anterior bending using an industrial robot arm. The QCT scans were processed to generate specimen-specific FE models as well as trabecular bone mineral density (tBMD), integral bone mineral density (iBMD), and MOS measures, such as axial and bending rigidities. Vertebral strength in anterior bending was poorly to moderately predicted by QCT-based BMD and MOS measures (R2 = 0.14-0.22). QCT-based FE models were better strength predictors (R2 = 0.34-0.40); however, their predictive performance was not statistically different from MOS bending rigidity (P > 0.05). Our results suggest that the poor clinical performance of noninvasive structural measures may be due to their inability to predict vertebral strength under bending loads. While their performance was not statistically better than MOS bending rigidities, QCT-based FE models were moderate predictors of both compressive and bending loads at failure, suggesting that this technique has the potential for strength prediction under nonuniform loads. The current FE modeling strategy is insufficient, however, and significant modifications must be made to better mimic whole bone elastic and inelastic material behavior.
Information and complexity measures for hydrologic model evaluation

USDA-ARS?s Scientific Manuscript database

Hydrological models are commonly evaluated through the residual-based performance measures such as the root-mean square error or efficiency criteria. Such measures, however, do not evaluate the degree of similarity of patterns in simulated and measured time series. The objective of this study was to...
Quantification of signal detection performance degradation induced by phase-retrieval in propagation-based x-ray phase-contrast imaging

NASA Astrophysics Data System (ADS)

Chou, Cheng-Ying; Anastasio, Mark A.

2016-04-01

In propagation-based X-ray phase-contrast (PB XPC) imaging, the measured image contains a mixture of absorption- and phase-contrast. To obtain separate images of the projected absorption and phase (i.e., refractive) properties of a sample, phase retrieval methods can be employed. It has been suggested that phase-retrieval can always improve image quality in PB XPC imaging. However, when objective (task-based) measures of image quality are employed, this is not necessarily true and phase retrieval can be detrimental. In this work, signal detection theory is utilized to quantify the performance of a Hotelling observer (HO) for detecting a known signal in a known background. Two cases are considered. In the first case, the HO acts directly on the measured intensity data. In the second case, the HO acts on either the retrieved phase or absorption image. We demonstrate that the performance of the HO is superior when acting on the measured intensity data. The loss of task-specific information induced by phase-retrieval is quantified by computing the efficiency of the HO as the ratio of the test statistic signal-to-noise ratio (SNR) for the two cases. The effect of the system geometry on this efficiency is systematically investigated. Our findings confirm that phase-retrieval can impair signal detection performance in XPC imaging.
Performance-based alternative assessments as a means of eliminating gender achievement differences on science tests

NASA Astrophysics Data System (ADS)

Brown, Norman Merrill

1998-09-01

Historically, researchers have reported an achievement difference between females and males on standardized science tests. These differences have been reported to be based upon science knowledge, abstract reasoning skills, mathematical abilities, and cultural and social phenomena. This research was designed to determine how mastery of specific science content from public school curricula might be evaluated with performance-based assessment models, without producing gender achievement differences. The assessment instruments used were Harcourt Brace Educational Measurement's GOALSsp°ler: A Performance-Based Measure of Achievement and the performance-based portion of the Stanford Achievement Testspcopyright, Ninth Edition. The identified independent variables were test, gender, ethnicity, and grade level. A 2 x 2 x 6 x 12 (test x gender x ethnicity x grade) factorial experimental design was used to organize the data. A stratified random sample (N = 2400) was selected from a national pool of norming data: N = 1200 from the GOALSsp°ler group and N = 1200 from the SAT9spcopyright group. The ANOVA analysis yielded mixed results. The factors of test, gender, ethnicity by grade, gender by grade, and gender by grade by ethnicity failed to produce significant results (alpha = 0.05). The factors yielding significant results were ethnicity, grade, and ethnicity by grade. Therefore, no significant differences were found between female and male achievement on these performance-based assessments.
Measurements of the Received Signal Level and Service Coverage Area at the IEEE 802.11 Access Point in the Building

NASA Astrophysics Data System (ADS)

Gunantara, N.; Sudiarta, P. K.; Prasetya, AAN A. I.; Dharma, A.; Gde Antara, I. N.

2018-04-01

Access point (AP) is part of a Wireless Local Access Network (WLAN) with its communications using WiFi. AP is used to transmit and receive data to users/clients. The ability of AP to serve users/clients depends on many factors. Moreover, if AP is applied in conditions inside the building. In this study, AP is installed at two points inside the building and then measured in the form of the received signal level (RSL) and service coverage area. One AP measured its performance by 26 measurement points and the other AP measured its performance by 20 measurement points. When AP has measured its performance then another AP position is switched off. Based on the measurement result, the received signal level value is the highest value is about -47 dBm at a distance of 3.2 m, while the lowest is about -79 dBm at a 9.21 m because it is on barrier 2 walls. While based on service coverage area, the area which is far away from the AP then the quality of service becomes bad because the transmitted signal is weakening caused by the distance and the loss of the wall.
Using Performance-Based Pay to Improve the Quality of Teachers

ERIC Educational Resources Information Center

Lavy, Victor

2007-01-01

Tying teachers' pay to their classroom performance should, says Victor Lavy, improve the current educational system both by clarifying teaching goals and by attracting and retaining the most productive teachers. But implementing pay for performance poses many practical challenges, because measuring individual teachers' performance is difficult.…
49 CFR 393.52 - Brake performance.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 5 2011-10-01 2011-10-01 false Brake performance. 393.52 Section 393.52... NECESSARY FOR SAFE OPERATION Brakes § 393.52 Brake performance. (a) Upon application of its service brakes... braking force is measured by a performance-based brake tester which meets the requirements of functional...
49 CFR 393.52 - Brake performance.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 49 Transportation 5 2013-10-01 2013-10-01 false Brake performance. 393.52 Section 393.52... NECESSARY FOR SAFE OPERATION Brakes § 393.52 Brake performance. (a) Upon application of its service brakes... braking force is measured by a performance-based brake tester which meets the requirements of functional...
49 CFR 393.52 - Brake performance.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 49 Transportation 5 2014-10-01 2014-10-01 false Brake performance. 393.52 Section 393.52... NECESSARY FOR SAFE OPERATION Brakes § 393.52 Brake performance. (a) Upon application of its service brakes... braking force is measured by a performance-based brake tester which meets the requirements of functional...

Some links on this page may take you to non-federal websites. Their policies may differ from this site.