When objects lose their meaning: what happens to their use?

PubMed

Bozeat, Sasha; Lambon Ralph, Matthew A; Patterson, Karalyn; Hodges, John R

2002-09-01

The 8 patients involved in this study were impaired on tests assessing knowledge of objects and on the demonstration of their use. The patients' success in object use was significantly correlated with their knowledge about the objects, providing further evidence that conceptual knowledge plays a key role in object use. Having a recipient present improved performance in the moderately impaired patients, suggesting that a certain level of conceptual knowledge must remain for the additional information to be beneficial. Although overall accuracy in using the target objects was not related to our measures of affordance, the specific aspects of use afforded by the objects' structures were relatively impervious to semantic impairment, suggesting a role for affordance information when object-specific knowledge is disrupted. The patients' familiarity with the objects was an important predictor of performance. Finally, despite good performance on tests of mechanical problem solving, the patients showed very little evidence of employing these skills in their interactions with real objects.

Performance Measurement for Public Services in Academic and Research Libraries. Occasional Paper Number #9.

ERIC Educational Resources Information Center

Cronin, Mary J.

This paper defines performance measurement as the clarification of objectives and standards, identification of key activities, data collection and analysis, and formative evaluation of services. It then examines some of the factors involved in using performance measurement to evaluate public services activities, and analyzes performance…

Quantum-noise randomized data encryption for wavelength-division-multiplexed fiber-optic networks

DOE Office of Scientific and Technical Information (OSTI.GOV)

Corndorf, Eric; Liang Chuang; Kanter, Gregory S.

2005-06-15

We demonstrate high-rate randomized data-encryption through optical fibers using the inherent quantum-measurement noise of coherent states of light. Specifically, we demonstrate 650 Mbit/s data encryption through a 10 Gbit/s data-bearing, in-line amplified 200-km-long line. In our protocol, legitimate users (who share a short secret key) communicate using an M-ry signal set while an attacker (who does not share the secret key) is forced to contend with the fundamental and irreducible quantum-measurement noise of coherent states. Implementations of our protocol using both polarization-encoded signal sets as well as polarization-insensitive phase-keyed signal sets are experimentally and theoretically evaluated. Different from the performancemore » criteria for the cryptographic objective of key generation (quantum key-generation), one possible set of performance criteria for the cryptographic objective of data encryption is established and carefully considered.« less

Commercial Foods and Culinary Arts. Student Learning Guide.

ERIC Educational Resources Information Center

Palm Beach County Board of Public Instruction, West Palm Beach, FL.

This student learning guide contains one module for completing a course in commercial foods and culinary arts. It is designed especially for use in secondary schools in Palm Beach County, Florida. The module covers one task, and consists of a purpose, performance objective, enabling objectives, learning activities keyed to resources, information…

Machine Shop. Student Learning Guide.

ERIC Educational Resources Information Center

Palm Beach County Board of Public Instruction, West Palm Beach, FL.

This student learning guide contains eight modules for completing a course in machine shop. It is designed especially for use in Palm Beach County, Florida. Each module covers one task, and consists of a purpose, performance objective, enabling objectives, learning activities and resources, information sheets, student self-check with answer key,…

Quality and Equality: The Mask of Discursive Conflation in Education Policy Texts

ERIC Educational Resources Information Center

Gillies, Donald

2008-01-01

Two key themes of recent UK education policy texts have been a focus on "quality" in public sector performance, and on "equality" in the form of New Labour's stated commitment to equality of opportunity as a key policy objective. This twin approach can be seen at its most obvious in the concept of "excellence for…

Evaluating the Use of Learning Objects for Improving Calculus Readiness

ERIC Educational Resources Information Center

Kay, Robin; Kletskin, Ilona

2010-01-01

Pre-calculus concepts such as working with functions and solving equations are essential for students to explore limits, rates of change, and integrals. Yet many students have a weak understanding of these key concepts which impedes performance in their first year university Calculus course. A series of online learning objects was developed to…

The Instructional Quality Inventory. I. Introduction and Overview

DTIC Science & Technology

1978-11-01

level objectives, "hands-on" performance tests are usually most appropriate. T IS PAQ IS BEST QUA After a test item is consistent with its objective, the...idea. When the statement is separated, the key points stand out, and are not buried in the presentation. There are several ways to accomplish this goal

Quickly updatable hologram images with high performance photorefractive polymer composites

NASA Astrophysics Data System (ADS)

Tsutsumi, Naoto; Kinashi, Kenji; Nonomura, Asato; Sakai, Wataru

2012-02-01

We present here quickly updatable hologram images using high performance photorefractive (PR) polymer composite based on poly(N-vinyl carbazole) (PVCz). PVCz is one of the pioneer materials for photoconductive polymer. PVCz/7- DCST/CzEPA/TNF (44/35/20/1 by wt) gives high diffraction efficiency of 68 % at E = 45 V/μm with fast response speed. Response speed of optical diffraction is the key parameter for real-time 3D holographic display. Key parameter for obtaining quickly updatable hologram images is to control the glass transition temperature lower enough to enhance chromophore orientation. Object image of the reflected coin surface recorded with reference beam at 532 nm (green beam) in the PR polymer composite is simultaneously reconstructed using a red probe beam at 642 nm. Instead of using coin object, object image produced by a computer was displayed on a spatial light modulator (SLM) is used as an object for hologram. Reflected object beam from a SLM interfered with reference beam on PR polymer composite to record a hologram and simultaneously reconstructed by a red probe beam. Movie produced in a computer was recorded as a realtime hologram in the PR polymer composite and simultaneously clearly reconstructed with a video rate.

Design and Implementation of High-Performance GIS Dynamic Objects Rendering Engine

NASA Astrophysics Data System (ADS)

Zhong, Y.; Wang, S.; Li, R.; Yun, W.; Song, G.

2017-12-01

Spatio-temporal dynamic visualization is more vivid than static visualization. It important to use dynamic visualization techniques to reveal the variation process and trend vividly and comprehensively for the geographical phenomenon. To deal with challenges caused by dynamic visualization of both 2D and 3D spatial dynamic targets, especially for different spatial data types require high-performance GIS dynamic objects rendering engine. The main approach for improving the rendering engine with vast dynamic targets relies on key technologies of high-performance GIS, including memory computing, parallel computing, GPU computing and high-performance algorisms. In this study, high-performance GIS dynamic objects rendering engine is designed and implemented for solving the problem based on hybrid accelerative techniques. The high-performance GIS rendering engine contains GPU computing, OpenGL technology, and high-performance algorism with the advantage of 64-bit memory computing. It processes 2D, 3D dynamic target data efficiently and runs smoothly with vast dynamic target data. The prototype system of high-performance GIS dynamic objects rendering engine is developed based SuperMap GIS iObjects. The experiments are designed for large-scale spatial data visualization, the results showed that the high-performance GIS dynamic objects rendering engine have the advantage of high performance. Rendering two-dimensional and three-dimensional dynamic objects achieve 20 times faster on GPU than on CPU.

National Unmanned Aerial System Standardized Performance Testing and Rating (NUSTAR)

NASA Technical Reports Server (NTRS)

Kopardekar, Parimal

2016-01-01

The overall objective of the NUSTAR Capability is to offer standardized tests and scenario conditions to assess performance of the UAS. The following are goals of the NU-STAR: 1. Create a prototype standardized tests and scenarios that vehicles can be tested against. 2. Identify key performance parameters of all UAS and their standardized measurement strategy. 3. Develop standardized performance reporting method (e.g., consumer report style) to assist prospective buyers. 4. Identify key performance metrics that could be used by judged towards overall safety of the UAS and operations. 5. If vehicle certification standard is made by a regulatory agency, the performance of individual UAS could be compared against the minimum requirement (e.g., sense and avoid detection time, stopping distance, kinetic energy, etc.).

An Engine Research Program Focused on Low Pressure Turbine Aerodynamic Performance

NASA Technical Reports Server (NTRS)

Castner, Raymond; Wyzykowski, John; Chiapetta, Santo; Adamczyk, John

2002-01-01

A comprehensive test program was performed in the Propulsion Systems Laboratory at the NASA Glenn Research Center, Cleveland Ohio using a highly instrumented Pratt and Whitney Canada PW 545 turbofan engine. A key objective of this program was the development of a high-altitude database on small, high-bypass ratio engine performance and operability. In particular, the program documents the impact of altitude (Reynolds Number) on the aero-performance of the low-pressure turbine (fan turbine). A second objective was to assess the ability of a state-of-the-art CFD code to predict the effect of Reynolds number on the efficiency of the low-pressure turbine. CFD simulation performed prior and after the engine tests will be presented and discussed. Key findings are the ability of a state-of-the art CFD code to accurately predict the impact of Reynolds Number on the efficiency and flow capacity of the low-pressure turbine. In addition the CFD simulations showed the turbulent intensity exiting the low-pressure turbine to be high (9%). The level is consistent with measurements taken within an engine.

Transforming revenue management.

PubMed

Silveria, Richard; Alliegro, Debra; Nudd, Steven

2008-11-01

Healthcare organizations that want to undertake a patient administrative/revenue management transformation should: Define the vision with underlying business objectives and key performance measures. Strategically partner with key vendors for business process development and technology design. Create a program organization and governance infrastructure. Develop a corporate design model that defines the standards for operationalizing the vision. Execute the vision through technology deployment and corporate design model implementation.

Computerized training management system

DOEpatents

Rice, H.B.; McNair, R.C.; White, K.; Maugeri, T.

1998-08-04

A Computerized Training Management System (CTMS) is disclosed for providing a procedurally defined process that is employed to develop accreditable performance based training programs for job classifications that are sensitive to documented regulations and technical information. CTMS is a database that links information needed to maintain a five-phase approach to training-analysis, design, development, implementation, and evaluation independent of training program design. CTMS is designed using R-Base{trademark}, an-SQL compliant software platform. Information is logically entered and linked in CTMS. Each task is linked directly to a performance objective, which, in turn, is linked directly to a learning objective; then, each enabling objective is linked to its respective test items. In addition, tasks, performance objectives, enabling objectives, and test items are linked to their associated reference documents. CTMS keeps all information up to date since it automatically sorts, files and links all data; CTMS includes key word and reference document searches. 18 figs.

Computerized training management system

DOEpatents

Rice, Harold B.; McNair, Robert C.; White, Kenneth; Maugeri, Terry

1998-08-04

A Computerized Training Management System (CTMS) for providing a procedurally defined process that is employed to develop accreditable performance based training programs for job classifications that are sensitive to documented regulations and technical information. CTMS is a database that links information needed to maintain a five-phase approach to training-analysis, design, development, implementation, and evaluation independent of training program design. CTMS is designed using R-Base.RTM., an-SQL compliant software platform. Information is logically entered and linked in CTMS. Each task is linked directly to a performance objective, which, in turn, is linked directly to a learning objective; then, each enabling objective is linked to its respective test items. In addition, tasks, performance objectives, enabling objectives, and test items are linked to their associated reference documents. CTMS keeps all information up to date since it automatically sorts, files and links all data; CTMS includes key word and reference document searches.

Abusive supervision and subordinate performance: Instrumentality considerations in the emergence and consequences of abusive supervision.

PubMed

Walter, Frank; Lam, Catherine K; van der Vegt, Gerben S; Huang, Xu; Miao, Qing

2015-07-01

Drawing from moral exclusion theory, this article examines outcome dependence and interpersonal liking as key boundary conditions for the linkage between perceived subordinate performance and abusive supervision. Moreover, it investigates the role of abusive supervision for subordinates' subsequent, objective work performance. Across 2 independent studies, an experimental scenario study (N = 157; Study 1) and a time-lagged field study (N = 169; Study 2), the negative relationship between perceived subordinate performance and abusive supervision was found to hinge on a supervisor's outcome dependence on subordinates but not on a supervisor's liking of subordinates. Furthermore, Study 2 demonstrated (a) a negative association between abusive supervision and subordinates' subsequent objective performance and (b) a conditional indirect effect of perceived performance on subsequent objective performance, through abusive supervision, contingent on the degree of outcome dependence, although these relationships did not reach conventional significance levels when controlling for prior objective performance. All in all, the findings highlight the role of instrumentality considerations in relation to abusive supervision and promote new knowledge on both origins and consequences of such supervisory behavior. (c) 2015 APA, all rights reserved).

Identifying critical success factors (CSFs) of Facilities Management (FM) in non-low cost high-rise residential buildings

NASA Astrophysics Data System (ADS)

Dahlan, F. M.; Zainuddin, A.

2018-02-01

Critical success factors (CSFs) are important key areas of activity that must be performed well in any Facilities Management (FM) organisation to achieve its missions, objectives or goals. Before implementing CSFs, an FM organisation must identify the key areas where things must be done properly to enable the business to flourish. Although many performance measurements in FM organisation have been discussed in previous research, not much research has been done on CSFs from the perspective of FM business in non-low cost high-rise residential buildings. The purpose of this study is to develop a methodology in developing the CSFs group and CSFs for FM organisation in non-low cost residential buildings. This research will involve three (3) phases of research strategy to achieve the objective of this research.

Earth Observing Scanning Polarimeter (EOSP), phase B

NASA Technical Reports Server (NTRS)

1990-01-01

Evaluations performed during a Phase B study directed towards defining an optimal design for the Earth Observing Scanning Polarimeter (EOSP) instrument is summarized. An overview of the experiment approach is included which provides a summary of the scientific objectives, the background of the measurement approach, and the measurement method. In the instrumentation section, details of the design are discussed starting with the key instrument features required to accomplish the scientific objectives and a system characterization in terms of the Stokes vector/Mueller matrix formalism. This is followed by a detailing of the instrument design concept, the design of the individual elements of the system, the predicted performance, and a summary of appropriate instrument testing and calibration. The selected design makes use of key features of predecessor polarimeters and is fully compatible with the Earth Observing System spacecraft requirements.

Knowledge Discovery for Transonic Regional-Jet Wing through Multidisciplinary Design Exploration

NASA Astrophysics Data System (ADS)

Chiba, Kazuhisa; Obayashi, Shigeru; Morino, Hiroyuki

Data mining is an important facet of solving multi-objective optimization problem. Because it is one of the effective manner to discover the design knowledge in the multi-objective optimization problem which obtains large data. In the present study, data mining has been performed for a large-scale and real-world multidisciplinary design optimization (MDO) to provide knowledge regarding the design space. The MDO among aerodynamics, structures, and aeroelasticity of the regional-jet wing was carried out using high-fidelity evaluation models on the adaptive range multi-objective genetic algorithm. As a result, nine non-dominated solutions were generated and used for tradeoff analysis among three objectives. All solutions evaluated during the evolution were analyzed for the tradeoffs and influence of design variables using a self-organizing map to extract key features of the design space. Although the MDO results showed the inverted gull-wings as non-dominated solutions, one of the key features found by data mining was the non-gull wing geometry. When this knowledge was applied to one optimum solution, the resulting design was found to have better performance compared with the original geometry designed in the conventional manner.

Maintenance Business Plans.

ERIC Educational Resources Information Center

Adams, Matt

2002-01-01

Discusses maintenance business plans, statements which provide accountability for facilities maintenance organizations' considerable budgets. Discusses the plan's components: statement of plan objectives, macro and detailed description of the facility assets, maintenance function descriptions, description of key performance indicators, milestone…

The Efficacy of Strategy in the Competition for Research Funding in Higher Education

ERIC Educational Resources Information Center

Litwin, Jeffrey M.

2009-01-01

A prestigious reputation is the primary success factor in higher education because it attracts resources necessary to sustain growth. Among research-intensive universities (RIUs), research performance is a key driver of institutional reputation. Achieving an accelerating rate of growth of research performance is the desired objective of all RIUs…

University Leaders and University Performance in the United Kingdom: Is It "Who" Leads, or "Where" They Lead that Matters Most?

ERIC Educational Resources Information Center

Breakwell, Glynis M.; Tytherleigh, Michelle Y.

2010-01-01

With key performance indicators (KPIs) part of everyday life in the higher education (HE) sector, universities have become increasingly concerned with league tables and performance indicator-led strategy and planning. The choice an institution makes concerning the KPIs it wishes to be evaluated on depends on its mission and objectives, with a Head…

Federated Ground Station Network Model and Interface Specification

DTIC Science & Technology

2014-12-01

interface definition language JSON JavaScript Object Notation LEO low Earth orbit LNA low-noise amplifier MC3 Mobile CubeSat Command and Control...Naval Research Laboratory OQPSK offset quadrature phase-shift keying xviii P2P peer-to-peer PKI public key infrastructure REST Representational...enhanced our work being performed on the Mobile CubeSat Command and Control (MC3) ground station network. You also provided crucial guidance from

Antenna technology for advanced mobile communication systems

NASA Technical Reports Server (NTRS)

Rammos, Emmanuel; Roederer, Antoine; Rogard, Roger

1988-01-01

The onboard antenna front end is the key subsystem conditioning configuration and performance of mobile communication satellites. The objectives of this paper are to demonstrate this key role and to review L-band satellite antenna technology for earth coverage and regional applications. Multibeam arrays are first discussed, then unfurlable and inflatable reflector antennas are described. These technologies are now qualified in Europe for future mobile systems, for which the optimum choice of antenna technology has been found to be the key to efficient use of spectrum and power resources.

Crew behavior and performance in space analog environments

NASA Technical Reports Server (NTRS)

Kanki, Barbara G.

1992-01-01

The objectives and the current status of the Crew Factors research program conducted at NASA-Ames Research Center are reviewed. The principal objectives of the program are to determine the effects of a broad class of input variables on crew performance and to provide guidance with respect to the design and management of crews assigned to future space missions. A wide range of research environments are utilized, including controlled experimental settings, high fidelity full mission simulator facilities, and fully operational field environments. Key group processes are identified, and preliminary data are presented on the effect of crew size, type, and structure on team performance.

Objective comparison of particle tracking methods.

PubMed

Chenouard, Nicolas; Smal, Ihor; de Chaumont, Fabrice; Maška, Martin; Sbalzarini, Ivo F; Gong, Yuanhao; Cardinale, Janick; Carthel, Craig; Coraluppi, Stefano; Winter, Mark; Cohen, Andrew R; Godinez, William J; Rohr, Karl; Kalaidzidis, Yannis; Liang, Liang; Duncan, James; Shen, Hongying; Xu, Yingke; Magnusson, Klas E G; Jaldén, Joakim; Blau, Helen M; Paul-Gilloteaux, Perrine; Roudot, Philippe; Kervrann, Charles; Waharte, François; Tinevez, Jean-Yves; Shorte, Spencer L; Willemse, Joost; Celler, Katherine; van Wezel, Gilles P; Dan, Han-Wei; Tsai, Yuh-Show; Ortiz de Solórzano, Carlos; Olivo-Marin, Jean-Christophe; Meijering, Erik

2014-03-01

Particle tracking is of key importance for quantitative analysis of intracellular dynamic processes from time-lapse microscopy image data. Because manually detecting and following large numbers of individual particles is not feasible, automated computational methods have been developed for these tasks by many groups. Aiming to perform an objective comparison of methods, we gathered the community and organized an open competition in which participating teams applied their own methods independently to a commonly defined data set including diverse scenarios. Performance was assessed using commonly defined measures. Although no single method performed best across all scenarios, the results revealed clear differences between the various approaches, leading to notable practical conclusions for users and developers.

A semi-automatic 2D-to-3D video conversion with adaptive key-frame selection

NASA Astrophysics Data System (ADS)

Ju, Kuanyu; Xiong, Hongkai

2014-11-01

To compensate the deficit of 3D content, 2D to 3D video conversion (2D-to-3D) has recently attracted more attention from both industrial and academic communities. The semi-automatic 2D-to-3D conversion which estimates corresponding depth of non-key-frames through key-frames is more desirable owing to its advantage of balancing labor cost and 3D effects. The location of key-frames plays a role on quality of depth propagation. This paper proposes a semi-automatic 2D-to-3D scheme with adaptive key-frame selection to keep temporal continuity more reliable and reduce the depth propagation errors caused by occlusion. The potential key-frames would be localized in terms of clustered color variation and motion intensity. The distance of key-frame interval is also taken into account to keep the accumulated propagation errors under control and guarantee minimal user interaction. Once their depth maps are aligned with user interaction, the non-key-frames depth maps would be automatically propagated by shifted bilateral filtering. Considering that depth of objects may change due to the objects motion or camera zoom in/out effect, a bi-directional depth propagation scheme is adopted where a non-key frame is interpolated from two adjacent key frames. The experimental results show that the proposed scheme has better performance than existing 2D-to-3D scheme with fixed key-frame interval.

Creative display of museum objects within their cultural context

NASA Astrophysics Data System (ADS)

Wang, Shuo; Osanlou, Ardieshir; Excell, Peter

2014-02-01

Most existing holographic display methods concentrate on real object reconstruction, but there is a lack of research on object stories (revealing and presenting histories). To address this challenge, we propose a method, called 4 `ER' (leader, manager, implementer, presenter) to experience and respond objects in a special immersive environment. The key innovation of the 4'ER' method is to introduce the stories (political, historical, etc.) into hard copy holography, so as to synergy art and science for museum objects display. The hologram of an imitation of a blue and white porcelain jar from The Palace Museum, Beijing, China has been made, showing good performance and reflecting different pathway to knowledge.

Distributed Factorization Computation on Multiple Volunteered Mobile Resource to Break RSA Key

NASA Astrophysics Data System (ADS)

Jaya, I.; Hardi, S. M.; Tarigan, J. T.; Zamzami, E. M.; Sihombing, P.

2017-01-01

Similar to common asymmeric encryption, RSA can be cracked by usmg a series mathematical calculation. The private key used to decrypt the massage can be computed using the public key. However, finding the private key may require a massive amount of calculation. In this paper, we propose a method to perform a distributed computing to calculate RSA’s private key. The proposed method uses multiple volunteered mobile devices to contribute during the calculation process. Our objective is to demonstrate how the use of volunteered computing on mobile devices may be a feasible option to reduce the time required to break a weak RSA encryption and observe the behavior and running time of the application on mobile devices.

Developing information literacy: a key to evidence-based nursing.

PubMed

Shorten, A; Wallace, M C; Crookes, P A

2001-06-01

This report describes the evaluation of a curriculum-integrated programme designed to help students develop an awareness of the nursing literature, the skills to locate and retrieve it, and skills required in its evaluation; in other words'information literacy'. Positive changes in student performance on objective measures of information-literacy skills were revealed as well as a significant increase in the levels of confidence of the student in performing those skills. Students who had undertaken the information-literacy programme ('programme' students) performed better on a range of objective measures of information literacy, as well as reporting higher levels of confidence in these skills, than students who had not participated in the programme ('non-programme' students). Evaluation of this programme provides evidence of the potential usefulness of a curriculum-integrated approach for the development of information-literacy skills within nursing education. With these underlying skills, students will be better equipped to consolidate and extend their key information-literacy skills to include research appreciation and application. These are vital for effective lifelong learning and a prerequisite to evidence-based practice.

Development of Performance Standards for Employment Service. Volume 2: Part B. Findings and Recommendations. Final Report.

ERIC Educational Resources Information Center

Fairchild, Charles K.

The objective of the project was to develop methods for establishing output and input performance standards for the placement and placement support functions of the United States Employment Service (ES). This part of Volume 2 reports substantive findings and recommendations developed during the course of the project. A key recommendation is that…

Final Report - High Performance, Durable, Low Cost Membrane Electrode Assemblies for Transportation Applications

DOE Office of Scientific and Technical Information (OSTI.GOV)

Steinbach, Andrew

2017-05-31

The primary project objective was development of improved polymer electrolyte membrane fuel cell (PEMFC) membrane electrode assemblies (MEAs) which address the key DOE barriers of performance, durability and cost. Additional project objectives were to address commercialization barriers specific to MEAs comprising 3M nanostructured thin film (NSTF) electrodes, including a larger-than-acceptable sensitivity to operating conditions, an unexplained loss of rated power capability with operating time, and slow break-in conditioning. Significant progress was made against each of these barriers, and most DOE 2020 targets were met or substantially approached.

Field Testing of Utility Robots for Lunar Surface Operations

NASA Technical Reports Server (NTRS)

Fong, Terrence; Bualat, Maria; Deans, Matt; Allan, Mark; Bouyssounouse, Xavier; Broxton, Michael; Edwards, Laurence; Lee, Pascal; Lee, Susan Y.; Lees, David;

Problematizing the concept of the "borderline" group in performance assessments.

PubMed

Homer, Matt; Pell, Godfrey; Fuller, Richard

2017-05-01

Many standard setting procedures focus on the performance of the "borderline" group, defined through expert judgments by assessors. In performance assessments such as Objective Structured Clinical Examinations (OSCEs), these judgments usually apply at the station level. Using largely descriptive approaches, we analyze the assessment profile of OSCE candidates at the end of a five year undergraduate medical degree program to investigate the consistency of the borderline group across stations. We look specifically at those candidates who are borderline in individual stations, and in the overall assessment. While the borderline group can be clearly defined at the individual station level, our key finding is that the membership of this group varies considerably across stations. These findings pose challenges for some standard setting methods, particularly the borderline group and objective borderline methods. They also suggest that institutions should ensure appropriate conjunctive rules to limit compensation in performance between stations to maximize "diagnostic accuracy". In addition, this work highlights a key benefit of sequential testing formats in OSCEs. In comparison with a traditional, single-test format, sequential models allow assessment of "borderline" candidates across a wider range of content areas with concomitant improvements in pass/fail decision-making.

Objective comparison of particle tracking methods

PubMed Central

Chenouard, Nicolas; Smal, Ihor; de Chaumont, Fabrice; Maška, Martin; Sbalzarini, Ivo F.; Gong, Yuanhao; Cardinale, Janick; Carthel, Craig; Coraluppi, Stefano; Winter, Mark; Cohen, Andrew R.; Godinez, William J.; Rohr, Karl; Kalaidzidis, Yannis; Liang, Liang; Duncan, James; Shen, Hongying; Xu, Yingke; Magnusson, Klas E. G.; Jaldén, Joakim; Blau, Helen M.; Paul-Gilloteaux, Perrine; Roudot, Philippe; Kervrann, Charles; Waharte, François; Tinevez, Jean-Yves; Shorte, Spencer L.; Willemse, Joost; Celler, Katherine; van Wezel, Gilles P.; Dan, Han-Wei; Tsai, Yuh-Show; de Solórzano, Carlos Ortiz; Olivo-Marin, Jean-Christophe; Meijering, Erik

2014-01-01

Particle tracking is of key importance for quantitative analysis of intracellular dynamic processes from time-lapse microscopy image data. Since manually detecting and following large numbers of individual particles is not feasible, automated computational methods have been developed for these tasks by many groups. Aiming to perform an objective comparison of methods, we gathered the community and organized, for the first time, an open competition, in which participating teams applied their own methods independently to a commonly defined data set including diverse scenarios. Performance was assessed using commonly defined measures. Although no single method performed best across all scenarios, the results revealed clear differences between the various approaches, leading to important practical conclusions for users and developers. PMID:24441936

The Strategic Design of Reward Systems.

DTIC Science & Technology

1982-10-01

AuTO1 , 8 CO NTRACT Ok .NANT NUMO lll , Edward E. Lawler III N-00014-81-K-0048 9 PERFORMING ORGANIZATION NAME AND ADORErS 10. PROGRAM ELEMENT...SUPPLEMENTARY NOTES .iL L:~ 19 KEY WORDS (Continue on reveres side It necessary and Identify by block number) A Pay, performance appraisal, motivation...retention, culture development:, and skill development are considered. The relationship between these object iwv and such design options as performance pay

Using the balanced scorecard to measure Chinese and Japanese hospital performance.

PubMed

Chen, Xiao-yun; Yamauchi, Kazunobu; Kato, Ken; Nishimura, Akio; Ito, Katuski

2006-01-01

The objective of the paper is to confirm the feasibility and value of using the balanced scorecard (BSC) to measure performance in two hospitals in different countries. One hospital from China and another from Japan were chosen and key indicators were selected according to the BSC framework. A comparative hospital performance measurement model was set up using the BSC framework to comprehensively compare hospital performance in two countries. The BSC was found to be effective for underlining existing problems and identifying opportunities for improvements. The BSC also revealed the hospitals' contribution to performance improvement of each country's total health system. Hospital performance comparisons between countries using the BSC depend on the selection of feasible and appropriate key performance indicators, which is occasionally limited by data collection problems. The first use of the BSC to compare hospital performance between China and Japan shows benefits that not only suggests performance improvements in individual hospitals but also reveals effective health factors allowing implementation of valid national health policies.

Four-dimensional key design in amplitude, phase, polarization and distance for optical encryption based on polarization digital holography and QR code.

PubMed

Lin, Chao; Shen, Xueju; Li, Baochen

2014-08-25

We demonstrate that all parameters of optical lightwave can be simultaneously designed as keys in security system. This multi-dimensional property of key can significantly enlarge the key space and further enhance the security level of the system. The single-shot off-axis digital holography with orthogonal polarized reference waves is employed to perform polarization state recording on object wave. Two pieces of polarization holograms are calculated and fabricated to be arranged in reference arms to generate random amplitude and phase distribution respectively. When reconstruction, original information which is represented with QR code can be retrieved using Fresnel diffraction with decryption keys and read out noise-free. Numerical simulation results for this cryptosystem are presented. An analysis on the key sensitivity and fault tolerance properties are also provided.

Using KPIs To Anchor Strategic Choices.

ERIC Educational Resources Information Center

Rowley, Daniel James

1997-01-01

Colleges and universities should approach strategic change by establishing three kinds of key performance indicators (KPIs): mandated (state-mandates or other imposed objectives); management (determined by the administration); and derived (from the special intentions of institutional units). By assembling the three kinds of KPIs, the strategic…

Structural factors of jointed plain concrete pavements : SPS-2--initial evaluation and analysis

DOT National Transportation Integrated Search

2005-04-01

The SPS-2 experiment, "Strategic Study of Structural Factors for Jointed Plain Concrete Pavements (JPCP)," is one of the key components of the Long Term Pavement Performance (LTPP) program. The main objective of this experiment is to determine the re...

Comparison of the Core Primary Curriculum in England to Those of Other High Performing Countries. Research Report DCSF-RW048

ERIC Educational Resources Information Center

Ruddock, Graham; Sainsbury, Marian

2008-01-01

This study looks at the curricula for mathematics, science and literacy, comparing England's curricula with those of other countries based on performance in international comparative surveys. The main objective was to answer the question: How does the content of the Primary Curriculum in England at Key stage 2 compare in literacy, math and science…

You've Got a Brand New Pair of Roller Skates: I've Got a Brand New Key

ERIC Educational Resources Information Center

Houck, Cherry K.; And Others

1977-01-01

A project is reported in which students consurrently enrolled in a course in psychological foundations and in student teaching received a concentrated consumer's course in systematic behavior management with emphasis on application. Performance objectives are described. (LBH)

Flexibility in Visual Working Memory: Accurate Change Detection in the Face of Irrelevant Variations in Position

PubMed Central

Woodman, Geoffrey F.; Vogel, Edward K.; Luck, Steven J.

2012-01-01

Many recent studies of visual working memory have used change-detection tasks in which subjects view sequential displays and are asked to report whether they are identical or if one object has changed. A key question is whether the memory system used to perform this task is sufficiently flexible to detect changes in object identity independent of spatial transformations, but previous research has yielded contradictory results. To address this issue, the present study compared standard change-detection tasks with tasks in which the objects varied in size or position between successive arrays. Performance was nearly identical across the standard and transformed tasks unless the task implicitly encouraged spatial encoding. These results resolve the discrepancies in prior studies and demonstrate that the visual working memory system can detect changes in object identity across spatial transformations. PMID:22287933

Modeling, Simulation and Analysis of Public Key Infrastructure

NASA Technical Reports Server (NTRS)

Liu, Yuan-Kwei; Tuey, Richard; Ma, Paul (Technical Monitor)

1998-01-01

Security is an essential part of network communication. The advances in cryptography have provided solutions to many of the network security requirements. Public Key Infrastructure (PKI) is the foundation of the cryptography applications. The main objective of this research is to design a model to simulate a reliable, scalable, manageable, and high-performance public key infrastructure. We build a model to simulate the NASA public key infrastructure by using SimProcess and MatLab Software. The simulation is from top level all the way down to the computation needed for encryption, decryption, digital signature, and secure web server. The application of secure web server could be utilized in wireless communications. The results of the simulation are analyzed and confirmed by using queueing theory.

Key Objectives Bank: Year 9. Key Stage 3: National Strategy.

ERIC Educational Resources Information Center

Department for Education and Skills, London (England).

In each sub-section of the "Framework for Teaching English: Years 7, 8 and 9," certain key objectives are identified in boldface print. These objectives are key because they signify skills or understanding which are crucial to pupils' language development. They are challenging for the age group and are important markers of progress. This…

Objective quality assessment for multiexposure multifocus image fusion.

PubMed

Hassen, Rania; Wang, Zhou; Salama, Magdy M A

2015-09-01

There has been a growing interest in image fusion technologies, but how to objectively evaluate the quality of fused images has not been fully understood. Here, we propose a method for objective quality assessment of multiexposure multifocus image fusion based on the evaluation of three key factors of fused image quality: 1) contrast preservation; 2) sharpness; and 3) structure preservation. Subjective experiments are conducted to create an image fusion database, based on which, performance evaluation shows that the proposed fusion quality index correlates well with subjective scores, and gives a significant improvement over the existing fusion quality measures.

Performance in Object-Choice Aesop's Fable Tasks Are Influenced by Object Biases in New Caledonian Crows but not in Human Children.

PubMed

Miller, Rachael; Jelbert, Sarah A; Taylor, Alex H; Cheke, Lucy G; Gray, Russell D; Loissel, Elsa; Clayton, Nicola S

2016-01-01

The ability to reason about causality underlies key aspects of human cognition, but the extent to which non-humans understand causality is still largely unknown. The Aesop's Fable paradigm, where objects are inserted into water-filled tubes to obtain out-of-reach rewards, has been used to test casual reasoning in birds and children. However, success on these tasks may be influenced by other factors, specifically, object preferences present prior to testing or arising during pre-test stone-dropping training. Here, we assessed this 'object-bias' hypothesis by giving New Caledonian crows and 5-10 year old children two object-choice Aesop's Fable experiments: sinking vs. floating objects, and solid vs. hollow objects. Before each test, we assessed subjects' object preferences and/or trained them to prefer the alternative object. Both crows and children showed pre-test object preferences, suggesting that birds in previous Aesop's Fable studies may also have had initial preferences for objects that proved to be functional on test. After training to prefer the non-functional object, crows, but not children, performed more poorly on these two object-choice Aesop's Fable tasks than subjects in previous studies. Crows dropped the non-functional objects into the tube on their first trials, indicating that, unlike many children, they do not appear to have an a priori understanding of water displacement. Alternatively, issues with inhibition could explain their performance. The crows did, however, learn to solve the tasks over time. We tested crows further to determine whether their eventual success was based on learning about the functional properties of the objects, or associating dropping the functional object with reward. Crows inserted significantly more rewarded, non-functional objects than non-rewarded, functional objects. These findings suggest that the ability of New Caledonian crows to produce performances rivaling those of young children on object-choice Aesop's Fable tasks is partly due to pre-existing object preferences.

Methodological Challenges in Studies Examining the Effects of Breakfast on Cognitive Performance and Appetite in Children and Adolescents.

PubMed

Adolphus, Katie; Bellissimo, Nick; Lawton, Clare L; Ford, Nikki A; Rains, Tia M; Totosy de Zepetnek, Julia; Dye, Louise

2017-01-01

Breakfast is purported to confer a number of benefits on diet quality, health, appetite regulation, and cognitive performance. However, new evidence has challenged the long-held belief that breakfast is the most important meal of the day. This review aims to provide a comprehensive discussion of the key methodological challenges and considerations in studies assessing the effect of breakfast on cognitive performance and appetite control, along with recommendations for future research. This review focuses on the myriad challenges involved in studying children and adolescents specifically. Key methodological challenges and considerations include study design and location, sampling and sample section, choice of objective cognitive tests, choice of objective and subjective appetite measures, merits of providing a fixed breakfast compared with ad libitum, assessment and definition of habitual breakfast consumption, transparency of treatment condition, difficulty of isolating the direct effects of breakfast consumption, untangling acute and chronic effects, and influence of confounding variables. These methodological challenges have hampered a clear substantiation of the potential positive effects of breakfast on cognition and appetite control and contributed to the debate questioning the notion that breakfast is the most important meal of the day. © 2017 American Society for Nutrition.

Methodological Challenges in Studies Examining the Effects of Breakfast on Cognitive Performance and Appetite in Children and Adolescents123

PubMed Central

Bellissimo, Nick; Ford, Nikki A; Rains, Tia M

2017-01-01

Breakfast is purported to confer a number of benefits on diet quality, health, appetite regulation, and cognitive performance. However, new evidence has challenged the long-held belief that breakfast is the most important meal of the day. This review aims to provide a comprehensive discussion of the key methodological challenges and considerations in studies assessing the effect of breakfast on cognitive performance and appetite control, along with recommendations for future research. This review focuses on the myriad challenges involved in studying children and adolescents specifically. Key methodological challenges and considerations include study design and location, sampling and sample section, choice of objective cognitive tests, choice of objective and subjective appetite measures, merits of providing a fixed breakfast compared with ad libitum, assessment and definition of habitual breakfast consumption, transparency of treatment condition, difficulty of isolating the direct effects of breakfast consumption, untangling acute and chronic effects, and influence of confounding variables. These methodological challenges have hampered a clear substantiation of the potential positive effects of breakfast on cognition and appetite control and contributed to the debate questioning the notion that breakfast is the most important meal of the day. PMID:28096143

Aerobic Digestion. Student Manual. Biological Treatment Process Control.

ERIC Educational Resources Information Center

Klopping, Paul H.

This manual contains the textual material for a single-lesson unit on aerobic sludge digestion. Topic areas addressed include: (1) theory of aerobic digestion; (2) system components; (3) performance factors; (4) indicators of stable operation; and (5) operational problems and their solutions. A list of objectives, glossary of key terms, and…

A Multi-Objective Method to Align Human Resource Allocation with University Strategy

ERIC Educational Resources Information Center

Bouillard, Philippe

2016-01-01

Universities are currently under considerable pressure to reach their stakeholders' expectations. Management tools that use strategic plans, key performance indicators and quality assurance methods are increasingly deployed. This paper aims to demonstrate how resource allocation can be aligned with institutional strategic plans with a very simple…

N plus 3 Advanced Concept Studies for Supersonic Commercial Transport Aircraft Entering Service in the 2030-2035 Period

NASA Technical Reports Server (NTRS)

Welge, H. Robert; Bonet, John; Magee, Todd; Tompkins, Daniel; Britt, Terry R.; Nelson, Chet; Miller, Gregory; Stenson, Douglas; Staubach, J. Brent; Bala, Naushir;

Trade-offs between pasture production and farmland bird conservation: exploration of options using a dynamic farm model.

PubMed

Sabatier, R; Teillard, F; Rossing, W A H; Doyen, L; Tichit, M

2015-05-01

In European grassland landscapes, grazing and mowing play a key role for the maintenance of high-quality habitats that host important bird populations. As grasslands are also key resources for cattle feeding, there is a need to develop management strategies that achieve the double objective of production and biodiversity conservation. The objective of this study was to use a modelling approach to generate recognisable patterns of bird dynamics in farms composed of different land use proportions, and to compare their production and ecological dimensions. We developed a dynamic model, which linked grassland management to bird population dynamics at the field and farm levels. The model was parameterised for two types of suckling farms corresponding to contrasting levels of grassland intensification and for two bird species of high conservation value. A viability algorithm was used to define and assess viable management strategies for production and ecological performance so as to draw the shape of the relationship between both types of performances for the two types of farms. Our results indicated that, at the farm level, there was a farming system effect with a negative and non-linear relationship linking performance. Improving bird population maintenance was less costly in extensive farms compared with intensive farms. At the field level, the model predicted the timing and intensity of land use, maximising either production or ecological performance. The results suggested that multi-objective grassland management would benefit from public policies that consider levels of organisation higher than the field level, such as the farm or the landscape.

Improved Object Localization Using Accurate Distance Estimation in Wireless Multimedia Sensor Networks

PubMed Central

Ur Rehman, Yasar Abbas; Tariq, Muhammad; Khan, Omar Usman

2015-01-01

Object localization plays a key role in many popular applications of Wireless Multimedia Sensor Networks (WMSN) and as a result, it has acquired a significant status for the research community. A significant body of research performs this task without considering node orientation, object geometry and environmental variations. As a result, the localized object does not reflect the real world scenarios. In this paper, a novel object localization scheme for WMSN has been proposed that utilizes range free localization, computer vision, and principle component analysis based algorithms. The proposed approach provides the best possible approximation of distance between a wmsn sink and an object, and the orientation of the object using image based information. Simulation results report 99% efficiency and an error ratio of 0.01 (around 1 ft) when compared to other popular techniques. PMID:26528919

Object-based benefits without object-based representations.

PubMed

Fougnie, Daryl; Cormiea, Sarah M; Alvarez, George A

2013-08-01

Influential theories of visual working memory have proposed that the basic units of memory are integrated object representations. Key support for this proposal is provided by the same object benefit: It is easier to remember multiple features of a single object than the same set of features distributed across multiple objects. Here, we replicate the object benefit but demonstrate that features are not stored as single, integrated representations. Specifically, participants could remember 10 features better when arranged in 5 objects compared to 10 objects, yet memory for one object feature was largely independent of memory for the other object feature. These results rule out the possibility that integrated representations drive the object benefit and require a revision of the concept of object-based memory representations. We propose that working memory is object-based in regard to the factors that enhance performance but feature based in regard to the level of representational failure. PsycINFO Database Record (c) 2013 APA, all rights reserved.

Timing, timing, timing: Fast decoding of object information from intracranial field potentials in human visual cortex

PubMed Central

Liu, Hesheng; Agam, Yigal; Madsen, Joseph R.; Kreiman, Gabriel

2010-01-01

Summary The difficulty of visual recognition stems from the need to achieve high selectivity while maintaining robustness to object transformations within hundreds of milliseconds. Theories of visual recognition differ in whether the neuronal circuits invoke recurrent feedback connections or not. The timing of neurophysiological responses in visual cortex plays a key role in distinguishing between bottom-up and top-down theories. Here we quantified at millisecond resolution the amount of visual information conveyed by intracranial field potentials from 912 electrodes in 11 human subjects. We could decode object category information from human visual cortex in single trials as early as 100 ms post-stimulus. Decoding performance was robust to depth rotation and scale changes. The results suggest that physiological activity in the temporal lobe can account for key properties of visual recognition. The fast decoding in single trials is compatible with feed-forward theories and provides strong constraints for computational models of human vision. PMID:19409272

Electro-optical characterization of GaAs solar cells

NASA Technical Reports Server (NTRS)

Olsen, Larry C.; Dunham, Glen; Addis, F. W.; Huber, Dan; Daling, Dave

1987-01-01

The electro-optical characterization of gallium arsenide p/n solar cells is discussed. The objective is to identify and understand basic mechanisms which limit the performance of high efficiency gallium arsenide solar cells. The approach involves conducting photoresponse and temperature dependent current-voltage measurements, and interpretation of the data in terms of theory to determine key device parameters. Depth concentration profiles are also utilized in formulating a model to explain device performance.

Thermal performance evaluation of the infrared telescope dewar subsystem

NASA Technical Reports Server (NTRS)

Urban, E. W.

1986-01-01

Thermal performance evaluations (TPE) were conducted with the superfluid helium dewar of the Infrared Telescope (IRT) experiment from November 1981 to August 1982. Test included measuring key operating parameters, simulating operations with an attached instrument cryostat and validating servicing, operating and safety procedures. Test activities and results are summarized. All objectives are satisfied except for those involving transfer of low pressure liquid helium (LHe) from a supply dewar into the dewar subsystem.

Secure content objects

DOEpatents

Evans, William D [Cupertino, CA

2009-02-24

A secure content object protects electronic documents from unauthorized use. The secure content object includes an encrypted electronic document, a multi-key encryption table having at least one multi-key component, an encrypted header and a user interface device. The encrypted document is encrypted using a document encryption key associated with a multi-key encryption method. The encrypted header includes an encryption marker formed by a random number followed by a derivable variation of the same random number. The user interface device enables a user to input a user authorization. The user authorization is combined with each of the multi-key components in the multi-key encryption key table and used to try to decrypt the encrypted header. If the encryption marker is successfully decrypted, the electronic document may be decrypted. Multiple electronic documents or a document and annotations may be protected by the secure content object.

Remediation management of complex sites using an adaptive site management approach.

PubMed

Price, John; Spreng, Carl; Hawley, Elisabeth L; Deeb, Rula

2017-12-15

Complex sites require a disproportionate amount of resources for environmental remediation and long timeframes to achieve remediation objectives, due to their complex geologic conditions, hydrogeologic conditions, geochemical conditions, contaminant-related conditions, large scale of contamination, and/or non-technical challenges. A recent team of state and federal environmental regulators, federal agency representatives, industry experts, community stakeholders, and academia worked together as an Interstate Technology & Regulatory Council (ITRC) team to compile resources and create new guidance on the remediation management of complex sites. This article summarizes the ITRC team's recommended process for addressing complex sites through an adaptive site management approach. The team provided guidance for site managers and other stakeholders to evaluate site complexities and determine site remediation potential, i.e., whether an adaptive site management approach is warranted. Adaptive site management was described as a comprehensive, flexible approach to iteratively evaluate and adjust the remedial strategy in response to remedy performance. Key aspects of adaptive site management were described, including tools for revising and updating the conceptual site model (CSM), the importance of setting interim objectives to define short-term milestones on the journey to achieving site objectives, establishing a performance model and metrics to evaluate progress towards meeting interim objectives, and comparing actual with predicted progress during scheduled periodic evaluations, and establishing decision criteria for when and how to adapt/modify/revise the remedial strategy in response to remedy performance. Key findings will be published in an ITRC Technical and Regulatory guidance document in 2017 and free training webinars will be conducted. More information is available at www.itrc-web.org. Copyright © 2017 Elsevier Ltd. All rights reserved.

Student Satisfaction in Higher Education: A Meta-Analytic Study

ERIC Educational Resources Information Center

Santini, Fernando de Oliveira; Ladeira, Wagner Junior; Sampaio, Claudio Hoffmann; da Silva Costa, Gustavo

2017-01-01

This paper discusses the results of a meta-analysis performed to identify key antecedent and consequent constructs of satisfaction in higher education. We offer an integrated model to achieve a better understanding of satisfaction in the context of higher education. To accomplish this objective, we identified 83 studies that were valid and…

A Working Model for the Development, Implementation and Evaluation of an Art Program on the College Level.

ERIC Educational Resources Information Center

Demery, Marie; And Others

Components of an art program that was developed with federal funding are outlined. The model contains information on the grant proposal, including the rationale for funding, implementation strategies, activity timetable, qualifications of key personnel, activity objectives and performance measures, intitutional goals, activity milestones, and…

Attitudes and Preferences of Children Living in Orphanage towards Physical Education Lessons

ERIC Educational Resources Information Center

Bendíková, Elena; Nemcek, Dagmar

2017-01-01

Background: The key factor that affects the success of shaping positive attitudes towards the regular life-long performance of a physical activity is the students' level of inner motivation. This is influenced, among other things, by their family background, the educational institution that they attend and the educator's competencies. Objective:…

Acceleration-Augmented LQG Control of an Active Magnetic Bearing

NASA Technical Reports Server (NTRS)

Feeley, Joseph J.

1993-01-01

A linear-quadratic-gaussian (LQG) regulator controller design for an acceleration-augmented active magnetic bearing (AMB) is outlined. Acceleration augmentation is a key feature in providing improved dynamic performance of the controller. The optimal control formulation provides a convenient method of trading-off fast transient response and force attenuation as control objectives.

Achieving continuous improvement in laboratory organization through performance measurements: a seven-year experience.

PubMed

Salinas, Maria; López-Garrigós, Maite; Gutiérrez, Mercedes; Lugo, Javier; Sirvent, Jose Vicente; Uris, Joaquin

2010-01-01

Laboratory performance can be measured using a set of model key performance indicators (KPIs). The design and implementation of KPIs are important issues. KPI results from 7 years are reported and their implementation, monitoring, objectives, interventions, result reporting and delivery are analyzed. The KPIs of the entire laboratory process were obtained using Laboratory Information System (LIS) registers. These were collected automatically using a data warehouse application, spreadsheets and external quality program reports. Customer satisfaction was assessed using surveys. Nine model laboratory KPIs were proposed and measured. The results of some examples of KPIs used in our laboratory are reported. Their corrective measurements or the implementation of objectives led to improvement in the associated KPIs results. Measurement of laboratory performance using KPIs and a data warehouse application that continuously collects registers and calculates KPIs confirmed the reliability of indicators, indicator acceptability and usability for users, and continuous process improvement.

Paediatric International Nursing Study: using person-centred key performance indicators to benchmark children's services.

PubMed

McCance, Tanya; Wilson, Val; Kornman, Kelly

2016-07-01

The aim of the Paediatric International Nursing Study was to explore the utility of key performance indicators in developing person-centred practice across a range of services provided to sick children. The objective addressed in this paper was evaluating the use of these indicators to benchmark services internationally. This study builds on primary research, which produced indicators that were considered novel both in terms of their positive orientation and use in generating data that privileges the patient voice. This study extends this research through wider testing on an international platform within paediatrics. The overall methodological approach was a realistic evaluation used to evaluate the implementation of the key performance indicators, which combined an integrated development and evaluation methodology. The study involved children's wards/hospitals in Australia (six sites across three states) and Europe (seven sites across four countries). Qualitative and quantitative methods were used during the implementation process, however, this paper reports the quantitative data only, which used survey, observations and documentary review. The findings demonstrate the quality of care being delivered to children and their families across different international sites. The benchmarking does, however, highlight some differences between paediatric and general hospitals, and between the different key performance indicators across all the sites. The findings support the use of the key performance indicators as a novel method to benchmark services internationally. Whilst the data collected across 20 paediatric sites suggest services are more similar than different, benchmarking illuminates variations that encourage a critical dialogue about what works and why. The transferability of the key performance indicators and measurement framework across different settings has significant implications for practice. The findings offer an approach to benchmarking and celebrating the successes within practice, while learning from partners across the globe in further developing person-centred cultures. © 2016 John Wiley & Sons Ltd.

Space Fence PDR Concept Development Phase

NASA Astrophysics Data System (ADS)

Haines, L.; Phu, P.

2011-09-01

The Space Fence, a major Air Force acquisition program, will become the dominant low-earth orbit uncued sensor in the space surveillance network (SSN). Its primary objective is to provide a 24/7 un-cued capability to find, fix, and track small objects in low earth orbit to include emerging and evolving threats, as well as the rapidly growing population of orbital debris. Composed of up to two geographically dispersed large-scale S-band phased array radars, this new system-of-systems concept will provide comprehensive Space Situational Awareness through net-centric operations and integrated decision support. Additionally, this program will facilitate cost saving force structure changes in the SSN, specifically including the decommissioning of very-high frequency VHF Air Force Space Surveillance System (AFSSS). The Space Fence Program Office entered a Preliminary Design Review (PDR) concept development phase in January 2011 to achieve the delivery of the Initial Operational Capability (IOC) expected in FY17. Two contractors were awarded to perform preliminary system design, conduct radar performance analyses and evaluations, and develop a functional PDR radar system prototype. The key objectives for the Phase A PDR effort are to reduce Space Fence total program technical, cost, schedule, and performance risk. The overall program objective is to achieve a preliminary design that demonstrates sufficient technical and manufacturing maturity and that represents a low risk, affordable approach to meet the Space Fence Technical Requirements Document (TRD) requirements for the final development and production phase to begin in 3QFY12. This paper provides an overview of the revised Space Fence program acquisition strategy for the Phase-A PDR phase to IOC, the overall program milestones and major technical efforts. In addition, the key system trade studies and modeling/simulation efforts undertaken during the System Design Requirement (SDR) phase to address and mitigate technical challenges of the Space Fence System will also be discussed. Examples include radar system optimization studies, modeling and simulation for system performance assessment, investigation of innovative Astrodynamics algorithms for initial orbit determination and observation correlation.

Art and authenticity: the importance of originals in judgments of value.

PubMed

Newman, George E; Bloom, Paul

2012-08-01

Why are original artworks valued more than identical duplicates? The present studies explore 2 mechanisms underlying the special value of original artwork: the assessment of the art object as a unique creative act (performance) and the degree of physical contact with the original artist (contagion). Across 5 experiments, participants were exposed to hypothetical scenarios in which an original object was duplicated. The type of object varied across experiments (e.g., a painting vs. a piece of furniture) as did the circumstances surrounding the creation of the original object and the duplicate. Overall, the results support assessments of performance and contagion as key factors underlying the value of original artwork, and they are consistent with the conclusion that the discrepancy in value between original artworks and perfect duplicates derives from people's lay theories about the domain of art, rather than from associations with particular kinds of art or certain cases of forgery. (PsycINFO Database Record (c) 2012 APA, all rights reserved).

Functional Task Test (FTT)

NASA Technical Reports Server (NTRS)

Bloomberg, Jacob J.; Mulavara, Ajitkumar; Peters, Brian T.; Rescheke, Millard F.; Wood, Scott; Lawrence, Emily; Koffman, Igor; Ploutz-Snyder, Lori; Spiering, Barry A.; Feeback, Daniel L.;

Teenage smoking, attempts to quit, and school performance.

PubMed Central

Hu, T W; Lin, Z; Keeler, T E

1998-01-01

OBJECTIVES: This study examined the relationship between school performance, smoking, and quitting attempts among teenagers. METHODS: A logistic regression model was used to predict the probability of being a current smoker or a former smoker. Data were derived from the 1990 California Youth Tobacco Survey. RESULTS: Students' school performance was a key factor in predicting smoking and quitting attempts when other sociodemographic and family income factors were controlled. CONCLUSIONS: Developing academic or remedial classes designed to improve students' school performance may lead to a reduction in smoking rates among teenagers while simultaneously providing a human capital investment in their futures. PMID:9618625

Rocket Ejector Studies for Application to RBCC Engines: An Integrated Experimental/CFD Approach

NASA Technical Reports Server (NTRS)

Pal, S.; Merkle, C. L.; Anderson, W. E.; Santoro, R. J.

1997-01-01

Recent interest in low cost, reliable access to space has generated increased interest in advanced technology approaches to space transportation systems. A key to the success of such programs lies in the development of advanced propulsion systems capable of achieving the performance and operations goals required for the next generation of space vehicles. One extremely promising approach involves the combination of rocket and air- breathing engines into a rocket-based combined-cycle engine (RBCC). A key element of that engine is the rocket ejector which is utilized in the zero to Mach two operating regime. Studies of RBCC engine concepts are not new and studies dating back thirty years are well documented in the literature. However, studies focused on the rocket ejector mode of the RBCC cycle are lacking. The present investigation utilizes an integrated experimental and computation fluid dynamics (CFD) approach to examine critical rocket ejector performance issues. In particular, the development of a predictive methodology capable of performance prediction is a key objective in order to analyze thermal choking and its control, primary/secondary pressure matching considerations, and effects of nozzle expansion ratio. To achieve this objective, the present study emphasizes obtaining new data using advanced optical diagnostics such as Raman spectroscopy and CFD techniques to investigate mixing in the rocket ejector mode. A new research facility for the study of the rocket ejector mode is described along with the diagnostic approaches to be used. The CFD modeling approach is also described along with preliminary CFD predictions obtained to date.

Detection of blob objects in microscopic zebrafish images based on gradient vector diffusion.

PubMed

Li, Gang; Liu, Tianming; Nie, Jingxin; Guo, Lei; Malicki, Jarema; Mara, Andrew; Holley, Scott A; Xia, Weiming; Wong, Stephen T C

2007-10-01

The zebrafish has become an important vertebrate animal model for the study of developmental biology, functional genomics, and disease mechanisms. It is also being used for drug discovery. Computerized detection of blob objects has been one of the important tasks in quantitative phenotyping of zebrafish. We present a new automated method that is able to detect blob objects, such as nuclei or cells in microscopic zebrafish images. This method is composed of three key steps. The first step is to produce a diffused gradient vector field by a physical elastic deformable model. In the second step, the flux image is computed on the diffused gradient vector field. The third step performs thresholding and nonmaximum suppression based on the flux image. We report the validation and experimental results of this method using zebrafish image datasets from three independent research labs. Both sensitivity and specificity of this method are over 90%. This method is able to differentiate closely juxtaposed or connected blob objects, with high sensitivity and specificity in different situations. It is characterized by a good, consistent performance in blob object detection.

Performance in Object-Choice Aesop’s Fable Tasks Are Influenced by Object Biases in New Caledonian Crows but not in Human Children

PubMed Central

Taylor, Alex H.; Cheke, Lucy G.; Gray, Russell D.; Loissel, Elsa; Clayton, Nicola S.

2016-01-01

The ability to reason about causality underlies key aspects of human cognition, but the extent to which non-humans understand causality is still largely unknown. The Aesop’s Fable paradigm, where objects are inserted into water-filled tubes to obtain out-of-reach rewards, has been used to test casual reasoning in birds and children. However, success on these tasks may be influenced by other factors, specifically, object preferences present prior to testing or arising during pre-test stone-dropping training. Here, we assessed this ‘object-bias’ hypothesis by giving New Caledonian crows and 5–10 year old children two object-choice Aesop’s Fable experiments: sinking vs. floating objects, and solid vs. hollow objects. Before each test, we assessed subjects’ object preferences and/or trained them to prefer the alternative object. Both crows and children showed pre-test object preferences, suggesting that birds in previous Aesop’s Fable studies may also have had initial preferences for objects that proved to be functional on test. After training to prefer the non-functional object, crows, but not children, performed more poorly on these two object-choice Aesop’s Fable tasks than subjects in previous studies. Crows dropped the non-functional objects into the tube on their first trials, indicating that, unlike many children, they do not appear to have an a priori understanding of water displacement. Alternatively, issues with inhibition could explain their performance. The crows did, however, learn to solve the tasks over time. We tested crows further to determine whether their eventual success was based on learning about the functional properties of the objects, or associating dropping the functional object with reward. Crows inserted significantly more rewarded, non-functional objects than non-rewarded, functional objects. These findings suggest that the ability of New Caledonian crows to produce performances rivaling those of young children on object-choice Aesop’s Fable tasks is partly due to pre-existing object preferences. PMID:27936242

Decoding visual object categories from temporal correlations of ECoG signals.

PubMed

Majima, Kei; Matsuo, Takeshi; Kawasaki, Keisuke; Kawai, Kensuke; Saito, Nobuhito; Hasegawa, Isao; Kamitani, Yukiyasu

2014-04-15

How visual object categories are represented in the brain is one of the key questions in neuroscience. Studies on low-level visual features have shown that relative timings or phases of neural activity between multiple brain locations encode information. However, whether such temporal patterns of neural activity are used in the representation of visual objects is unknown. Here, we examined whether and how visual object categories could be predicted (or decoded) from temporal patterns of electrocorticographic (ECoG) signals from the temporal cortex in five patients with epilepsy. We used temporal correlations between electrodes as input features, and compared the decoding performance with features defined by spectral power and phase from individual electrodes. While using power or phase alone, the decoding accuracy was significantly better than chance, correlations alone or those combined with power outperformed other features. Decoding performance with correlations was degraded by shuffling the order of trials of the same category in each electrode, indicating that the relative time series between electrodes in each trial is critical. Analysis using a sliding time window revealed that decoding performance with correlations began to rise earlier than that with power. This earlier increase in performance was replicated by a model using phase differences to encode categories. These results suggest that activity patterns arising from interactions between multiple neuronal units carry additional information on visual object categories. Copyright © 2013 Elsevier Inc. All rights reserved.

Experiments with a Parallel Multi-Objective Evolutionary Algorithm for Scheduling

NASA Technical Reports Server (NTRS)

Brown, Matthew; Johnston, Mark D.

2013-01-01

Evolutionary multi-objective algorithms have great potential for scheduling in those situations where tradeoffs among competing objectives represent a key requirement. One challenge, however, is runtime performance, as a consequence of evolving not just a single schedule, but an entire population, while attempting to sample the Pareto frontier as accurately and uniformly as possible. The growing availability of multi-core processors in end user workstations, and even laptops, has raised the question of the extent to which such hardware can be used to speed up evolutionary algorithms. In this paper we report on early experiments in parallelizing a Generalized Differential Evolution (GDE) algorithm for scheduling long-range activities on NASA's Deep Space Network. Initial results show that significant speedups can be achieved, but that performance does not necessarily improve as more cores are utilized. We describe our preliminary results and some initial suggestions from parallelizing the GDE algorithm. Directions for future work are outlined.

In-orbit commissioning of the NIRSpec instrument on the James Webb Space Telescope

NASA Astrophysics Data System (ADS)

Böker, T.; Muzerolle, J.; Bacinski, J.; Alves de Oliveira, C.; Birkmann, S.; Ferruit, P.; Karl, H.; Lemke, R.; Lützgendorf, N.; Marston, A.; Mosner, P.; Rawle, T.; Sirianni, M.

2016-07-01

The James Webb Space Telescope (JWST), scheduled for launch in 2018, promises to revolutionize observational astronomy, due to its unprecedented sensitivity at near and mid-infrared wavelengths. Following launch, a ~6 month long commissioning campaign aims to verify the observatory performance. A key element in this campaign is the verification and early calibration of the four JWST science instruments, one of which is the Near-Infrared Spectrograph (NIRSpec). This paper summarizes the objectives of the NIRSpec commissioning campaign, and outlines the sequence of activities needed to achieve these objectives.

Infants' use of category knowledge and object attributes when segregating objects at 8.5 months of age.

PubMed

Needham, Amy; Cantlon, Jessica F; Ormsbee Holley, Susan M

2006-12-01

The current research investigates infants' perception of a novel object from a category that is familiar to young infants: key rings. We ask whether experiences obtained outside the lab would allow young infants to parse the visible portions of a partly occluded key ring display into one single unit, presumably as a result of having categorized it as a key ring. This categorization was marked by infants' perception of the keys and ring as a single unit that should move together, despite their attribute differences. We showed infants a novel key ring display in which the keys and ring moved together as one rigid unit (Move-together event) or the ring moved but the keys remained stationary throughout the event (Move-apart event). Our results showed that 8.5-month-old infants perceived the keys and ring as connected despite their attribute differences, and that their perception of object unity was eliminated as the distinctive attributes of the key ring were removed. When all of the distinctive attributes of the key ring were removed, the 8.5-month-old infants perceived the display as two separate units, which is how younger infants (7-month-old) perceived the key ring display with all its distinctive attributes unaltered. These results suggest that on the basis of extensive experience with an object category, infants come to identify novel members of that category and expect them to possess the attributes typical of that category.

Academic Job Satisfaction and Motivation: Findings from a Nationwide Study in Portuguese Higher Education

ERIC Educational Resources Information Center

de Lourdes Machado-Taylor, Maria; Meira Soares, Virgílio; Brites, Rui; Brites Ferreira, José; Farhangmehr, Minoo; Gouveia, Odília Maria Rocha; Peterson, Marvin

2016-01-01

Academic staff is a key resource in higher education institutions (HEIs) and therefore has a major role in the achievement of the objectives of these institutions. Satisfied and well-motivated academic staff can build a national and international reputation for themselves and their institutions. Moreover, the performance of academic staff impacts…

Strategies for Promoting Gatekeeper Course Success among Students Needing Remediation: Research Report for the Virginia Community College System

ERIC Educational Resources Information Center

Roksa, Josipa; Jenkins, Davis; Jaggars, Shanna Smith; Zeidenberg, Matthew; Cho, Sung-Woo

2009-01-01

The Virginia Community College System (VCCS) is engaged in a strategic planning process to improve performance beyond the goals in "Dateline 2009," the system's current vision and plan. A key objective is to encourage colleges to improve retention and academic success for students, particularly the substantial numbers who arrive…

Data Collection Manual for Academic and Research Library Network Statistics and Performance Measures.

ERIC Educational Resources Information Center

Shim, Wonsik "Jeff"; McClure, Charles R.; Fraser, Bruce T.; Bertot, John Carlo

This manual provides a beginning approach for research libraries to better describe the use and users of their networked services. The manual also aims to increase the visibility and importance of developing such statistics and measures. Specific objectives are: to identify selected key statistics and measures that can describe use and users of…

[Recommendations for the evaluation and follow-up of the continuous quality improvement].

PubMed

Maurellet-Evrard, S; Daunizeau, A

2013-06-01

Continual improvement of the quality in a medical laboratory is based on the implementation of tools for systematically evaluate the quality management system and its ability to meet the objectives defined. Monitoring through audit and management review, addressing complaints and nonconformities and performing client satisfaction survey are the key for the continual improvement.

Engine Tune-Up Service. Unit 3: Primary Circuit. Posttests. Automotive Mechanics Curriculum.

ERIC Educational Resources Information Center

Morse, David T.

This book of posttests is designed to accompany the Engine Tune-Up Service Student Guide for Unit 3, Primary Circuit, available separately as CE 031 211. Focus of the posttests is setting the primary ignition circuit. One multiple choice posttest is provided, covering the eight performance objectives contained in the unit. (No answer key is…

Change in filter strip performance over ten years

Treesearch

M.G. Dosskey; K.D. Hoagland; J.R. Brandle

2007-01-01

Effectiveness of filter strips may change over a period of years because key soil and vegetation conditions change after conversion of cultivated farmland to permanent vegetation. the main objectives of this study were to : 1) determine if effectiveness of a filter strip changes over years since establishment, and 2) determine if temporal change depends on vegetation...

A multi-disciplinary approach to fire management strategy, suppression costs, community interaction, and organizational performance

Treesearch

Anne E. Black; Krista Gebert; Sarah McCaffrey; Toddi Steelman; Janie Canton-Thompson

2009-01-01

Wildland fire management must balance the multiple objectives of protecting life, property, and resources; reducing hazardous fuels; and restoring ecosystems. These Federal policy imperatives, varied yet connected, must be met under an increasingly constrained budget. A key to management success is effectively exercising the full range of management flexibility in...

Federal Student Aid (FSA) Five-Year Strategic Plan. FY 2004-2008

ERIC Educational Resources Information Center

US Department of Education, 2004

2004-01-01

The FSA Five-Year Strategic Plan is a roadmap for FY 2004-2008 that identifies five long-range strategic objectives, tactical short-term goals, and performance management initiatives. In working toward the goals outlined in the plan, FSA will address a number of key challenges, including legacy system migration, business process re-engineering,…

Object Detection and Classification by Decision-Level Fusion for Intelligent Vehicle Systems.

PubMed

Oh, Sang-Il; Kang, Hang-Bong

2017-01-22

To understand driving environments effectively, it is important to achieve accurate detection and classification of objects detected by sensor-based intelligent vehicle systems, which are significantly important tasks. Object detection is performed for the localization of objects, whereas object classification recognizes object classes from detected object regions. For accurate object detection and classification, fusing multiple sensor information into a key component of the representation and perception processes is necessary. In this paper, we propose a new object-detection and classification method using decision-level fusion. We fuse the classification outputs from independent unary classifiers, such as 3D point clouds and image data using a convolutional neural network (CNN). The unary classifiers for the two sensors are the CNN with five layers, which use more than two pre-trained convolutional layers to consider local to global features as data representation. To represent data using convolutional layers, we apply region of interest (ROI) pooling to the outputs of each layer on the object candidate regions generated using object proposal generation to realize color flattening and semantic grouping for charge-coupled device and Light Detection And Ranging (LiDAR) sensors. We evaluate our proposed method on a KITTI benchmark dataset to detect and classify three object classes: cars, pedestrians and cyclists. The evaluation results show that the proposed method achieves better performance than the previous methods. Our proposed method extracted approximately 500 proposals on a 1226 × 370 image, whereas the original selective search method extracted approximately 10 6 × n proposals. We obtained classification performance with 77.72% mean average precision over the entirety of the classes in the moderate detection level of the KITTI benchmark dataset.

Object Detection and Classification by Decision-Level Fusion for Intelligent Vehicle Systems

PubMed Central

Oh, Sang-Il; Kang, Hang-Bong

2017-01-01

To understand driving environments effectively, it is important to achieve accurate detection and classification of objects detected by sensor-based intelligent vehicle systems, which are significantly important tasks. Object detection is performed for the localization of objects, whereas object classification recognizes object classes from detected object regions. For accurate object detection and classification, fusing multiple sensor information into a key component of the representation and perception processes is necessary. In this paper, we propose a new object-detection and classification method using decision-level fusion. We fuse the classification outputs from independent unary classifiers, such as 3D point clouds and image data using a convolutional neural network (CNN). The unary classifiers for the two sensors are the CNN with five layers, which use more than two pre-trained convolutional layers to consider local to global features as data representation. To represent data using convolutional layers, we apply region of interest (ROI) pooling to the outputs of each layer on the object candidate regions generated using object proposal generation to realize color flattening and semantic grouping for charge-coupled device and Light Detection And Ranging (LiDAR) sensors. We evaluate our proposed method on a KITTI benchmark dataset to detect and classify three object classes: cars, pedestrians and cyclists. The evaluation results show that the proposed method achieves better performance than the previous methods. Our proposed method extracted approximately 500 proposals on a 1226×370 image, whereas the original selective search method extracted approximately 106×n proposals. We obtained classification performance with 77.72% mean average precision over the entirety of the classes in the moderate detection level of the KITTI benchmark dataset. PMID:28117742

Neuromorphic Event-Based 3D Pose Estimation

PubMed Central

Reverter Valeiras, David; Orchard, Garrick; Ieng, Sio-Hoi; Benosman, Ryad B.

2016-01-01

Pose estimation is a fundamental step in many artificial vision tasks. It consists of estimating the 3D pose of an object with respect to a camera from the object's 2D projection. Current state of the art implementations operate on images. These implementations are computationally expensive, especially for real-time applications. Scenes with fast dynamics exceeding 30–60 Hz can rarely be processed in real-time using conventional hardware. This paper presents a new method for event-based 3D object pose estimation, making full use of the high temporal resolution (1 μs) of asynchronous visual events output from a single neuromorphic camera. Given an initial estimate of the pose, each incoming event is used to update the pose by combining both 3D and 2D criteria. We show that the asynchronous high temporal resolution of the neuromorphic camera allows us to solve the problem in an incremental manner, achieving real-time performance at an update rate of several hundreds kHz on a conventional laptop. We show that the high temporal resolution of neuromorphic cameras is a key feature for performing accurate pose estimation. Experiments are provided showing the performance of the algorithm on real data, including fast moving objects, occlusions, and cases where the neuromorphic camera and the object are both in motion. PMID:26834547

Improving Diaper Performance for Extremely Low-Birth-Weight Infants.

PubMed

Sanchez, Veronica; Maladen-Percy, Michelle; Gustin, Jennifer; Tally, Amy; Gibb, Roger; Ogle, Julie; Kenneally, Dianna C; Carr, Andrew N

2018-06-01

Extremely low-birth-weight (ELBW) infants face significant diapering challenges compared with their full-term peers, due to immature musculature, nervous system, and skin development. Advances in medical care has increased an ELBW infant's rate of survival, which creates a growing need for diapers to better serve these infants. Aim of research. The objective of this study was to identify and confirm the requirements for optimal diaper performance from the neonatal intensive care unit nurses' perspective, as well as to assess in-hospital performance to determine if new features improved key developmental care parameters. Two surveys were shared among nurses to address study objectives. Study 1 (N = 151) was designed for neonatal intensive care unit nurses to identify key requirements for ELBW diapers and rate the performance of existing ELBW diapers. Study 2 (N = 99) assessed in-hospital performance of the test diaper compared with the usual diaper, under normal usage conditions. Findings/results. The majority of nurses agreed that ELBW diapers must fit appropriately between the legs so that hips and legs are not spread apart and that ELBW diapers need to be flexible between the legs for positioning. Of the nurses-infant pair responses, 93% ( P < .0001) preferred the test ELBW diaper over their usual diaper. Findings suggest that nurses should be included in the product design process to ensure both their needs and the needs of an infant are being met. Nurses are considering how diaper features may affect both acute and long-term medical outcomes, and this information provides necessary guidance to diaper manufacturers and designers when developing better-performing diapers.

Multidimensional evaluation of performance: experimental application of the balanced scorecard in Ferrara university hospital.

PubMed

Verzola, Adriano; Bentivegna, Roberto; Carandina, Gianni; Trevisani, Lucio; Gregorio, Pasquale; Mandini, Alberto

2009-09-08

One of the best-known performance planning and evaluation techniques utilising both monetary and non-monetary data is the Balanced Scorecard (BSC). This is a means of rationalising the global activity of a business in the attempt to create value, and to translate the company vision into a set of tactical objectives and measurable strategies. The aim of this study was to implement and evaluate the use of BSC in two departments of the St. Anna University Hospital, Ferrara: the Analysis Laboratory and Digestive Endoscopy operating units (OU). With the collaboration of the health workers involved, a precise methodological programme was pursued: Definition of the strategic map from 4 perspectives, according to Kaplan and Norton, Definition of the Key Performance Areas (KPA), or macro-objectives, Identification of the cause-effect relationships between KPAs, Identification of the sub-objectives of each KPA, Definition of the Key Performance Indicators (KPI), Definition of the weight/importance of each objective in the global evaluation. The information gathered permitted the definition of macro- and sub-objectives for each perspective, as well as determining the relevant indicators, standards, weights, frequency of detection and means of acquisition. Strategic maps showing the cause/effect relationships in each OU were created, as were 'evaluation panels', which describe the global performance of each department. For each perspective, the fundamental data were summarised in one table. Evaluation of each perspective yielded a positive result for the majority of the objectives, and the global result (including all 4 perspectives) was found to be satisfactory. The Balanced Scorecard was implemented in the abovementioned OUs of St. Anna University Hospital, Ferrara, after the health workers themselves realised the need for change.In our research the employees were pleased to be evaluated, not only for the financial outcomes, but also for the satisfaction of improving internal procedure, relationships with the community and their own growth/learning. BSC is an ideal point of contact between the financial and clinical dimensions of management. However, difficulties in its application were faced, among these, at least in the initial phase, the lack of information systems able to drive it, and the complexity of the research for specific indicators needed to be overcome. The time factor (on average, at least two years are required) and the availability of technological resources were also limiting factors.The rapid diffusion of BSC among the principal international profit and non-profit organisations is testament to its great potential. This project could be seen as a preparatory phase in the strategical analysis of a subsequent business plan.

Engine Tune-up Service. Unit 2: Charging System. Posttests. Automotive Mechanics Curriculum.

ERIC Educational Resources Information Center

Richardson, Roger L.; Bacon, E. Miles

This book of posttests is designed to accompany the Engine Tune-Up Service Student Guide for Unit 2, Charging System, available separately as CE 031 208. Focus of the posttest is on the testing of the charging system. One multiple choice posttest is provided, that covers the three performance objectives contained in the unit. (No answer key is…

Preschool Children's Interpretation of Object-Initial Sentences: Neural Correlates of Their Behavioral Performance

ERIC Educational Resources Information Center

Schipke, Christine S.; Knoll, Lisa J.; Friederici, Angela D.; Oberecker, Regine

2012-01-01

The acquisition of the function of case-marking is a key step in the development of sentence processing for German-speaking children since case-marking reveals the relations between sentential arguments. In this study, we investigated the development of the processing of case-marking and argument structures in children at 3, 4;6 and 6 years of…

Universal Batch Steganalysis

DTIC Science & Technology

2014-06-01

in large-scale datasets such as might be obtained by monitoring a corporate network or social network. Identifying guilty actors, rather than payload...by monitoring a corporate network or social network. Identifying guilty actors, rather than payload-carrying objects, is entirely novel in steganalysis...implementation using Compute Unified Device Architecture (CUDA) on NVIDIA graphics cards. The key to good performance is to combine computations so that

Induced Labour Mobility through Continuing Vocational Training: Investigating Its Development and Role in the French Context during the Last Three Decades.

ERIC Educational Resources Information Center

Dif, M'Hamed

Introduced in 1971, the French "Continuing Vocational Training (CVT)" system was designed to promote workers'"socio-professional promotion." The contribution of its induced mobility to the fulfillment of this objective has always been considered as one of its key performance indicators. Outcomes of the CVT over the last 3…

Green Carrots: A Survey of State Use of Fiscal Incentives for Academic Quality. ASHE Annual Meeting Paper.

ERIC Educational Resources Information Center

Holland, Barbara A.; Berdahl, Robert O.

This paper presents data from a 1989 survey of 48 state higher education executive officers regarding the use of fiscal enhancement programs as a strategy to influence higher education performance. The paper reports on the purposes and objectives most often funded through specific incentives, and on the key advantages and disadvantages of this…

Propulsion Risk Reduction Activities for Non-Toxic Cryogenic Propulsion

NASA Technical Reports Server (NTRS)

Smith, Timothy D.; Klem, Mark D.; Fisher, Kenneth

2010-01-01

The Propulsion and Cryogenics Advanced Development (PCAD) Project s primary objective is to develop propulsion system technologies for non-toxic or "green" propellants. The PCAD project focuses on the development of non-toxic propulsion technologies needed to provide necessary data and relevant experience to support informed decisions on implementation of non-toxic propellants for space missions. Implementation of non-toxic propellants in high performance propulsion systems offers NASA an opportunity to consider other options than current hypergolic propellants. The PCAD Project is emphasizing technology efforts in reaction control system (RCS) thruster designs, ascent main engines (AME), and descent main engines (DME). PCAD has a series of tasks and contracts to conduct risk reduction and/or retirement activities to demonstrate that non-toxic cryogenic propellants can be a feasible option for space missions. Work has focused on 1) reducing the risk of liquid oxygen/liquid methane ignition, demonstrating the key enabling technologies, and validating performance levels for reaction control engines for use on descent and ascent stages; 2) demonstrating the key enabling technologies and validating performance levels for liquid oxygen/liquid methane ascent engines; and 3) demonstrating the key enabling technologies and validating performance levels for deep throttling liquid oxygen/liquid hydrogen descent engines. The progress of these risk reduction and/or retirement activities will be presented.

Propulsion Risk Reduction Activities for Nontoxic Cryogenic Propulsion

NASA Technical Reports Server (NTRS)

Smith, Timothy D.; Klem, Mark D.; Fisher, Kenneth L.

2010-01-01

The Propulsion and Cryogenics Advanced Development (PCAD) Project s primary objective is to develop propulsion system technologies for nontoxic or "green" propellants. The PCAD project focuses on the development of nontoxic propulsion technologies needed to provide necessary data and relevant experience to support informed decisions on implementation of nontoxic propellants for space missions. Implementation of nontoxic propellants in high performance propulsion systems offers NASA an opportunity to consider other options than current hypergolic propellants. The PCAD Project is emphasizing technology efforts in reaction control system (RCS) thruster designs, ascent main engines (AME), and descent main engines (DME). PCAD has a series of tasks and contracts to conduct risk reduction and/or retirement activities to demonstrate that nontoxic cryogenic propellants can be a feasible option for space missions. Work has focused on 1) reducing the risk of liquid oxygen/liquid methane ignition, demonstrating the key enabling technologies, and validating performance levels for reaction control engines for use on descent and ascent stages; 2) demonstrating the key enabling technologies and validating performance levels for liquid oxygen/liquid methane ascent engines; and 3) demonstrating the key enabling technologies and validating performance levels for deep throttling liquid oxygen/liquid hydrogen descent engines. The progress of these risk reduction and/or retirement activities will be presented.

What does a Performance Measurement System Tell Us about the National Comprehensive Cancer Control Program?

PubMed Central

Townsend, Julie S.; Moore, Angela R.; Mulder, Tiffani N.; Boyd, Mary

2015-01-01

Context The National Comprehensive Cancer Control Program (NCCCP) performance measurement system seeks to understand both the processes that funded programs undertake with their respective coalitions to implement the objectives of their cancer plans and outcomes of those efforts. Objective To identify areas of achievement and technical assistance needs of NCCCP awardees. Design Program performance was assessed through surveys completed by program directors on performance indicators in 2009 and 2010 and queries from a web-based management information system in 2011 and 2012. Setting Programs funded by CDC’s NCCCP. Participants 69 programs. Main Outcome Measure(s) The key performance measures assessed were: inclusion of diverse partners and key sectors in cancer coalitions; partners’ involvement in activities; receiving in-kind resources from partners; using evidence-based interventions and data for setting priorities; conducting program evaluation; using community- or organization-level strategies to address cancer control efforts; and demonstrating progress toward achieving health outcomes. Results Most programs reported having active coalitions that represent diverse organizational sectors. Nearly all programs routinely assess the burden of cancer. In-kind resources to implement activities peaked at $64,716 in the second year of a five year funding cycle, and declined in subsequent project years. By year 3, over 70% of programs reported having an evaluation plan. While programs reported that nearly two-thirds of their interventions were evidence-based, some programs implemented non-evidence-based interventions. A majority of programs successfully used at least one community- or organization-level change strategy. However, many programs did not incorporate objectives linked to health outcomes as they reported progress in implementing interventions. Conclusions: While NCCCP programs were strong at building and maintaining infrastructure, some programs may need additional technical assistance to increase the adoption of evidence-based interventions, develop solid and responsive evaluation plans, and better link efforts to population-based measures that demonstrate impact toward reducing the burden of cancer. PMID:25136936

Quantitative Evaluation of Performance in Interventional Neuroradiology: An Integrated Curriculum Featuring Theoretical and Practical Challenges.

PubMed

Ernst, Marielle; Kriston, Levente; Romero, Javier M; Frölich, Andreas M; Jansen, Olav; Fiehler, Jens; Buhk, Jan-Hendrik

2016-01-01

We sought to develop a standardized curriculum capable of assessing key competencies in Interventional Neuroradiology by the use of models and simulators in an objective, quantitative, and efficient way. In this evaluation we analyzed the associations between the practical experience, theoretical knowledge, and the skills lab performance of interventionalists. We evaluated the endovascular skills of 26 participants of the Advanced Course in Endovascular Interventional Neuroradiology of the European Society of Neuroradiology with a set of three tasks (aneurysm coiling and thrombectomy in a virtual simulator and placement of an intra-aneurysmal flow disruptor in a flow model). Practical experience was assessed by a survey. Participants completed a written and oral examination to evaluate theoretical knowledge. Bivariate and multivariate analyses were performed. In multivariate analysis knowledge of materials and techniques in Interventional Neuroradiology was moderately associated with skills in aneurysm coiling and thrombectomy. Experience in mechanical thrombectomy was moderately associated with thrombectomy skills, while age was negatively associated with thrombectomy skills. We found no significant association between age, sex, or work experience and skills in aneurysm coiling. Our study gives an example of how an integrated curriculum for reasonable and cost-effective assessment of key competences of an interventional neuroradiologist could look. In addition to traditional assessment of theoretical knowledge practical skills are measured by the use of endovascular simulators yielding objective, quantitative, and constructive data for the evaluation of the current performance status of participants as well as the evolution of their technical competency over time.

Pathways to Health Risk Exposure in Adult Film Performers

PubMed Central

Ryan, Gery; Margold, William; Torres, Jacqueline; Gelberg, Lillian

2008-01-01

Despite being part of a large and legal industry in Los Angeles, little is known about adult film performers’ exposure to health risks and when and how these risks might occur. The objective was to identify exposure to physical, mental, and social health risks and the pathways to such risks among adult film performers and to determine how risks differ between different types of performers, such as men and women. Semi-structured in-depth interviews were conducted with 18 female and ten male performers as well as two key informants from the industry. Performers and key informants were recruited through Protecting Adult Welfare, adult film venues, and snowball sampling. Performers engaged in risky health behaviors that included high-risk sexual acts that are unprotected, substance abuse, and body enhancement. They are exposed to physical trauma on the film set. Many entered and left the industry with financial insecurity and suffered from mental health problems. Women were more likely than men to be exposed to health risks. Adult film performers, especially women, are exposed to health risks that accumulate over time and that are not limited to sexually transmitted diseases. PMID:18709554

White paper updating conclusions of 1998 ILAW performance assessment

DOE Office of Scientific and Technical Information (OSTI.GOV)

MANN, F.M.

The purpose of this document is to provide a comparison of the estimated immobilized low-activity waste (LAW) disposal system performance against established performance objectives using the beat estimates for parameters and models to describe the system. The principal advances in knowledge since the last performance assessment (known as the 1998 ILAW PA [Mann 1998a]) have been in site specific information and data on the waste form performance for BNFL, Inc. relevant glass formulations. The white paper also estimates the maximum release rates for technetium and other key radionuclides and chemicals from the waste form. Finally, this white paper provides limitedmore » information on the impact of changes in waste form loading.« less

Direct manipulation of virtual objects

NASA Astrophysics Data System (ADS)

Nguyen, Long K.

Interacting with a Virtual Environment (VE) generally requires the user to correctly perceive the relative position and orientation of virtual objects. For applications requiring interaction in personal space, the user may also need to accurately judge the position of the virtual object relative to that of a real object, for example, a virtual button and the user's real hand. This is difficult since VEs generally only provide a subset of the cues experienced in the real world. Complicating matters further, VEs presented by currently available visual displays may be inaccurate or distorted due to technological limitations. Fundamental physiological and psychological aspects of vision as they pertain to the task of object manipulation were thoroughly reviewed. Other sensory modalities -- proprioception, haptics, and audition -- and their cross-interactions with each other and with vision are briefly discussed. Visual display technologies, the primary component of any VE, were canvassed and compared. Current applications and research were gathered and categorized by different VE types and object interaction techniques. While object interaction research abounds in the literature, pockets of research gaps remain. Direct, dexterous, manual interaction with virtual objects in Mixed Reality (MR), where the real, seen hand accurately and effectively interacts with virtual objects, has not yet been fully quantified. An experimental test bed was designed to provide the highest accuracy attainable for salient visual cues in personal space. Optical alignment and user calibration were carefully performed. The test bed accommodated the full continuum of VE types and sensory modalities for comprehensive comparison studies. Experimental designs included two sets, each measuring depth perception and object interaction. The first set addressed the extreme end points of the Reality-Virtuality (R-V) continuum -- Immersive Virtual Environment (IVE) and Reality Environment (RE). This validated, linked, and extended several previous research findings, using one common test bed and participant pool. The results provided a proven method and solid reference points for further research. The second set of experiments leveraged the first to explore the full R-V spectrum and included additional, relevant sensory modalities. It consisted of two full-factorial experiments providing for rich data and key insights into the effect of each type of environment and each modality on accuracy and timeliness of virtual object interaction. The empirical results clearly showed that mean depth perception error in personal space was less than four millimeters whether the stimuli presented were real, virtual, or mixed. Likewise, mean error for the simple task of pushing a button was less than four millimeters whether the button was real or virtual. Mean task completion time was less than one second. Key to the high accuracy and quick task performance time observed was the correct presentation of the visual cues, including occlusion, stereoscopy, accommodation, and convergence. With performance results already near optimal level with accurate visual cues presented, adding proprioception, audio, and haptic cues did not significantly improve performance. Recommendations for future research include enhancement of the visual display and further experiments with more complex tasks and additional control variables.

Teaching Cardiac Examination Skills

PubMed Central

Smith, Christopher A; Hart, Avery S; Sadowski, Laura S; Riddle, Janet; Evans, Arthur T; Clarke, Peter M; Ganschow, Pamela S; Mason, Ellen; Sequeira, Winston; Wang, Yue

2006-01-01

OBJECTIVE To determine if structured teaching of bedside cardiac examination skills improves medical residents' examination technique and their identification of key clinical findings. DESIGN Firm-based single-blinded controlled trial. SETTING Inpatient service at a university-affiliated public teaching hospital. PARTICIPANTS Eighty Internal Medicine residents. METHODS The study assessed 2 intervention groups that received 3-hour bedside teaching sessions during their 4-week rotation using either: (1) a traditional teaching method, “demonstration and practice” (DP) (n=26) or (2) an innovative method, “collaborative discovery” (CD) (n=24). The control group received their usual ward teaching sessions (n=25). The main outcome measures were scores on examination technique and correct identification of key clinical findings on an objective structured clinical examination (OSCE). RESULTS All 3 groups had similar scores for both their examination technique and identification of key findings in the preintervention OSCE. After teaching, both intervention groups significantly improved their technical examination skills compared with the control group. The increase was 10% (95% confidence interval [CI] 4% to 17%) for CD versus control and 12% (95% CI 6% to 19%) for DP versus control (both P<.005) equivalent to an additional 3 to 4 examination skills being correctly performed. Improvement in key findings was limited to a 5% (95% CI 2% to 9%) increase for the CD teaching method, CD versus control P=.046, equivalent to the identification of an additional 2 key clinical findings. CONCLUSIONS Both programs of bedside teaching increase the technical examination skills of residents but improvements in the identification of key clinical findings were modest and only demonstrated with a new method of teaching. PMID:16423116

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rainer, Leo I.; Hoeschele, Marc A.; Apte, Michael G.

This report addresses the results of detailed monitoring completed under Program Element 6 of Lawrence Berkeley National Laboratory's High Performance Commercial Building Systems (HPCBS) PIER program. The purpose of the Energy Simulations and Projected State-Wide Energy Savings project is to develop reasonable energy performance and cost models for high performance relocatable classrooms (RCs) across California climates. A key objective of the energy monitoring was to validate DOE2 simulations for comparison to initial DOE2 performance projections. The validated DOE2 model was then used to develop statewide savings projections by modeling base case and high performance RC operation in the 16 Californiamore » climate zones. The primary objective of this phase of work was to utilize detailed field monitoring data to modify DOE2 inputs and generate performance projections based on a validated simulation model. Additional objectives include the following: (1) Obtain comparative performance data on base case and high performance HVAC systems to determine how they are operated, how they perform, and how the occupants respond to the advanced systems. This was accomplished by installing both HVAC systems side-by-side (i.e., one per module of a standard two module, 24 ft by 40 ft RC) on the study RCs and switching HVAC operating modes on a weekly basis. (2) Develop projected statewide energy and demand impacts based on the validated DOE2 model. (3) Develop cost effectiveness projections for the high performance HVAC system in the 16 California climate zones.« less

Distributed sensor coordination for advanced energy systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tumer, Kagan

Motivation: The ability to collect key system level information is critical to the safe, efficient and reliable operation of advanced power systems. Recent advances in sensor technology have enabled some level of decision making directly at the sensor level. However, coordinating large numbers of sensors, particularly heterogeneous sensors, to achieve system level objectives such as predicting plant efficiency, reducing downtime or predicting outages requires sophisticated coordination algorithms. Indeed, a critical issue in such systems is how to ensure the interaction of a large number of heterogenous system components do not interfere with one another and lead to undesirable behavior. Objectivesmore » and Contributions: The long-term objective of this work is to provide sensor deployment, coordination and networking algorithms for large numbers of sensors to ensure the safe, reliable, and robust operation of advanced energy systems. Our two specific objectives are to: 1. Derive sensor performance metrics for heterogeneous sensor networks. 2. Demonstrate effectiveness, scalability and reconfigurability of heterogeneous sensor network in advanced power systems. The key technical contribution of this work is to push the coordination step to the design of the objective functions of the sensors, allowing networks of heterogeneous sensors to be controlled. By ensuring that the control and coordination is not specific to particular sensor hardware, this approach enables the design and operation of large heterogeneous sensor networks. In addition to the coordination coordination mechanism, this approach allows the system to be reconfigured in response to changing needs (e.g., sudden external events requiring new responses) or changing sensor network characteristics (e.g., sudden changes to plant condition). Impact: The impact of this work extends to a large class of problems relevant to the National Energy Technology Laboratory including sensor placement, heterogeneous sensor coordination, and sensor network control in advanced power systems. Each application has specific needs, but they all share the one crucial underlying problem: how to ensure that the interactions of a large number of heterogenous agents lead to coordinated system behavior. This proposal describes a new paradigm that addresses that very issue in a systematic way. Key Results and Findings: All milestones have been completed. Our results demonstrate that by properly shaping agent objective functions, we can develop large (up to 10,000 devices) heterogeneous sensor networks with key desirable properties. The first milestone shows that properly choosing agent-specific objective functions increases system performance by up to 99.9% compared to global evaluations. The second milestone shows evolutionary algorithms learn excellent sensor network coordination policies prior to network deployment, and these policies can be refined online once the network is deployed. The third milestone shows the resulting sensor networks networks are extremely robust to sensor noise, where networks with up to 25% sensor noise are capable of providing measurements with errors on the order of 10⁻³. The fourth milestone shows the resulting sensor networks are extremely robust to sensor failure, with 25% of the sensors in the system failing resulting in no significant performance losses after system reconfiguration.« less

Novel optical scanning cryptography using Fresnel telescope imaging.

PubMed

Yan, Aimin; Sun, Jianfeng; Hu, Zhijuan; Zhang, Jingtao; Liu, Liren

2015-07-13

We propose a new method called modified optical scanning cryptography using Fresnel telescope imaging technique for encryption and decryption of remote objects. An image or object can be optically encrypted on the fly by Fresnel telescope scanning system together with an encryption key. For image decryption, the encrypted signals are received and processed with an optical coherent heterodyne detection system. The proposed method has strong performance through use of secure Fresnel telescope scanning with orthogonal polarized beams and efficient all-optical information processing. The validity of the proposed method is demonstrated by numerical simulations and experimental results.

Evaluation of unique identifiers used as keys to match identical publications in Pure and SciVal - a case study from health science.

PubMed

Madsen, Heidi Holst; Madsen, Dicte; Gauffriau, Marianne

2016-01-01

Unique identifiers (UID) are seen as an effective key to match identical publications across databases or identify duplicates in a database. The objective of the present study is to investigate how well UIDs work as match keys in the integration between Pure and SciVal, based on a case with publications from the health sciences. We evaluate the matching process based on information about coverage, precision, and characteristics of publications matched versus not matched with UIDs as the match keys. We analyze this information to detect errors, if any, in the matching process. As an example we also briefly discuss how publication sets formed by using UIDs as the match keys may affect the bibliometric indicators number of publications, number of citations, and the average number of citations per publication.  The objective is addressed in a literature review and a case study. The literature review shows that only a few studies evaluate how well UIDs work as a match key. From the literature we identify four error types: Duplicate digital object identifiers (DOI), incorrect DOIs in reference lists and databases, DOIs not registered by the database where a bibliometric analysis is performed, and erroneous optical or special character recognition. The case study explores the use of UIDs in the integration between the databases Pure and SciVal. Specifically journal publications in English are matched between the two databases. We find all error types except erroneous optical or special character recognition in our publication sets. In particular the duplicate DOIs constitute a problem for the calculation of bibliometric indicators as both keeping the duplicates to improve the reliability of citation counts and deleting them to improve the reliability of publication counts will distort the calculation of average number of citations per publication. The use of UIDs as a match key in citation linking is implemented in many settings, and the availability of UIDs may become critical for the inclusion of a publication or a database in a bibliometric analysis.

Evaluation of unique identifiers used as keys to match identical publications in Pure and SciVal – a case study from health science

PubMed Central

Madsen, Heidi Holst; Madsen, Dicte; Gauffriau, Marianne

2016-01-01

Unique identifiers (UID) are seen as an effective key to match identical publications across databases or identify duplicates in a database. The objective of the present study is to investigate how well UIDs work as match keys in the integration between Pure and SciVal, based on a case with publications from the health sciences. We evaluate the matching process based on information about coverage, precision, and characteristics of publications matched versus not matched with UIDs as the match keys. We analyze this information to detect errors, if any, in the matching process. As an example we also briefly discuss how publication sets formed by using UIDs as the match keys may affect the bibliometric indicators number of publications, number of citations, and the average number of citations per publication.  The objective is addressed in a literature review and a case study. The literature review shows that only a few studies evaluate how well UIDs work as a match key. From the literature we identify four error types: Duplicate digital object identifiers (DOI), incorrect DOIs in reference lists and databases, DOIs not registered by the database where a bibliometric analysis is performed, and erroneous optical or special character recognition. The case study explores the use of UIDs in the integration between the databases Pure and SciVal. Specifically journal publications in English are matched between the two databases. We find all error types except erroneous optical or special character recognition in our publication sets. In particular the duplicate DOIs constitute a problem for the calculation of bibliometric indicators as both keeping the duplicates to improve the reliability of citation counts and deleting them to improve the reliability of publication counts will distort the calculation of average number of citations per publication. The use of UIDs as a match key in citation linking is implemented in many settings, and the availability of UIDs may become critical for the inclusion of a publication or a database in a bibliometric analysis. PMID:27635223

An overview of large wind turbine tests by electric utilities

NASA Technical Reports Server (NTRS)

Vachon, W. A.; Schiff, D.

1982-01-01

A summary of recent plants and experiences on current large wind turbine (WT) tests being conducted by electric utilities is provided. The test programs discussed do not include federal research and development (R&D) programs, many of which are also being conducted in conjunction with electric utilities. The information presented is being assembled in a project, funded by the Electric Power Research Institute (EPRI), the objective of which is to provide electric utilities with timely summaries of test performance on key large wind turbines. A summary of key tests, test instrumentation, and recent results and plans is given. During the past year, many of the utility test programs initiated have encountered test difficulties that required specific WT design changes. However, test results to date continue to indicate that long-term machine performance and cost-effectiveness are achievable.

Community detection in complex networks by using membrane algorithm

NASA Astrophysics Data System (ADS)

Liu, Chuang; Fan, Linan; Liu, Zhou; Dai, Xiang; Xu, Jiamei; Chang, Baoren

Community detection in complex networks is a key problem of network analysis. In this paper, a new membrane algorithm is proposed to solve the community detection in complex networks. The proposed algorithm is based on membrane systems, which consists of objects, reaction rules, and a membrane structure. Each object represents a candidate partition of a complex network, and the quality of objects is evaluated according to network modularity. The reaction rules include evolutionary rules and communication rules. Evolutionary rules are responsible for improving the quality of objects, which employ the differential evolutionary algorithm to evolve objects. Communication rules implement the information exchanged among membranes. Finally, the proposed algorithm is evaluated on synthetic, real-world networks with real partitions known and the large-scaled networks with real partitions unknown. The experimental results indicate the superior performance of the proposed algorithm in comparison with other experimental algorithms.

Multi-Objective Aerodynamic Optimization of the Streamlined Shape of High-Speed Trains Based on the Kriging Model.

PubMed

Xu, Gang; Liang, Xifeng; Yao, Shuanbao; Chen, Dawei; Li, Zhiwei

2017-01-01

Minimizing the aerodynamic drag and the lift of the train coach remains a key issue for high-speed trains. With the development of computing technology and computational fluid dynamics (CFD) in the engineering field, CFD has been successfully applied to the design process of high-speed trains. However, developing a new streamlined shape for high-speed trains with excellent aerodynamic performance requires huge computational costs. Furthermore, relationships between multiple design variables and the aerodynamic loads are seldom obtained. In the present study, the Kriging surrogate model is used to perform a multi-objective optimization of the streamlined shape of high-speed trains, where the drag and the lift of the train coach are the optimization objectives. To improve the prediction accuracy of the Kriging model, the cross-validation method is used to construct the optimal Kriging model. The optimization results show that the two objectives are efficiently optimized, indicating that the optimization strategy used in the present study can greatly improve the optimization efficiency and meet the engineering requirements.

JHR Project: a future Material Testing Reactor working as an International user Facility: The key-role of instrumentation in support to the development of modern experimental capacity

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bignan, G.; Gonnier, C.; Lyoussi, A.

2015-07-01

Research and development on fuel and material behaviour under irradiation is a key issue for sustainable nuclear energy in order to meet specific needs by keeping the best level of safety. These needs mainly deal with a constant improvement of performances and safety in order to optimize the fuel cycle and hence to reach nuclear energy sustainable objectives. A sustainable nuclear energy requires a high level of performances in order to meet specific needs such as: - Pursuing improvement of the performances and safety of present and coming water cooled reactor technologies. This will require a continuous R and Dmore » support following a long-term trend driven by the plant life management, safety demonstration, flexibility and economics improvement. Experimental irradiations of structure materials are necessary to anticipate these material behaviours and will contribute to their optimisation. - Upgrading continuously nuclear fuel technology in present and future nuclear power plants to achieve better performances and to optimise the fuel cycle keeping the best level of safety. Fuel evolution for generation II, III and III+ is a key stake requiring developments, qualification tests and safety experiments to ensure the competitiveness and safety: experimental tests exploring the full range of fuel behaviour determine fuel stability limits and safety margins, as a major input for the fuel reliability analysis. To perform such accurate and innovative progress and developments, specific and ad hoc instrumentation, irradiation devices, measurement methods are necessary to be set up inside or beside the material testing reactor (MTR) core. These experiments require beforehand in situ and on line sophisticated measurements to accurately determine different key parameters such as thermal and fast neutron fluxes and nuclear heating in order to precisely monitor and control the conducted assays. The new Material Testing Reactor JHR (Jules Horowitz Reactor) currently under construction at CEA Cadarache research centre in the south of France will represent a major Research Infrastructure for scientific studies regarding material and fuel behavior under irradiation. It will also be devoted to medical isotopes production. Hence JHR will offer a real opportunity to perform R and D programs regarding needs above and hence will crucially contribute to the selection, optimization and qualification of these innovative materials and fuels. The JHR reactor objectives, principles and main characteristics associated to specific experimental devices associated to measurement techniques and methodology, their performances, their limitations and field of applications will be presented and discussed. (authors)« less

Distributed query plan generation using multiobjective genetic algorithm.

PubMed

Panicker, Shina; Kumar, T V Vijay

2014-01-01

A distributed query processing strategy, which is a key performance determinant in accessing distributed databases, aims to minimize the total query processing cost. One way to achieve this is by generating efficient distributed query plans that involve fewer sites for processing a query. In the case of distributed relational databases, the number of possible query plans increases exponentially with respect to the number of relations accessed by the query and the number of sites where these relations reside. Consequently, computing optimal distributed query plans becomes a complex problem. This distributed query plan generation (DQPG) problem has already been addressed using single objective genetic algorithm, where the objective is to minimize the total query processing cost comprising the local processing cost (LPC) and the site-to-site communication cost (CC). In this paper, this DQPG problem is formulated and solved as a biobjective optimization problem with the two objectives being minimize total LPC and minimize total CC. These objectives are simultaneously optimized using a multiobjective genetic algorithm NSGA-II. Experimental comparison of the proposed NSGA-II based DQPG algorithm with the single objective genetic algorithm shows that the former performs comparatively better and converges quickly towards optimal solutions for an observed crossover and mutation probability.

Distributed Query Plan Generation Using Multiobjective Genetic Algorithm

PubMed Central

Panicker, Shina; Vijay Kumar, T. V.

2014-01-01

A distributed query processing strategy, which is a key performance determinant in accessing distributed databases, aims to minimize the total query processing cost. One way to achieve this is by generating efficient distributed query plans that involve fewer sites for processing a query. In the case of distributed relational databases, the number of possible query plans increases exponentially with respect to the number of relations accessed by the query and the number of sites where these relations reside. Consequently, computing optimal distributed query plans becomes a complex problem. This distributed query plan generation (DQPG) problem has already been addressed using single objective genetic algorithm, where the objective is to minimize the total query processing cost comprising the local processing cost (LPC) and the site-to-site communication cost (CC). In this paper, this DQPG problem is formulated and solved as a biobjective optimization problem with the two objectives being minimize total LPC and minimize total CC. These objectives are simultaneously optimized using a multiobjective genetic algorithm NSGA-II. Experimental comparison of the proposed NSGA-II based DQPG algorithm with the single objective genetic algorithm shows that the former performs comparatively better and converges quickly towards optimal solutions for an observed crossover and mutation probability. PMID:24963513

Setting objectives for managing Key deer

USGS Publications Warehouse

Diefenbach, Duane R.; Wagner, Tyler; Stauffer, Glenn E.

2014-01-01

The U.S. Fish and Wildlife Service (FWS) is responsible for the protection and management of Key deer (Odocoileus virginianus clavium) because the species is listed as Endangered under the Endangered Species Act (ESA). The purpose of the ESA is to protect and recover imperiled species and the ecosystems upon which they depend. There are a host of actions that could possibly be undertaken to recover the Key deer population, but without a clearly defined problem and stated objectives it can be difficult to compare and evaluate alternative actions. In addition, management goals and the acceptability of alternative management actions are inherently linked to stakeholders, who should be engaged throughout the process of developing a decision framework. The purpose of this project was to engage a representative group of stakeholders to develop a problem statement that captured the management problem the FWS must address with Key deer and identify objectives that, if met, would help solve the problem. In addition, the objectives were organized in a hierarchical manner (i.e., an objectives network) to show how they are linked, and measurable attributes were identified for each objective. We organized a group of people who represented stakeholders interested in and potentially affected by the management of Key deer. These stakeholders included individuals who represented local, state, and federal governments, non-governmental organizations, the general public, and local businesses. This stakeholder group met five full days over the course of an eight-week period to identify objectives that would address the following problem:“As recovery and removal from the Endangered Species list is the purpose of the Endangered Species Act, the U.S. Fish and Wildlife Service needs a management approach that will ensure a sustainable, viable, and healthy Key deer population. Urbanization has affected the behavior and population dynamics of the Key deer and the amount and characteristics of available habitat. The identified management approach must balance relevant social and economic concerns, Federal (e.g., Endangered Species Act, Wilderness Act, Refuge Act) and state regulations, and the conservation of biodiversity (e.g., Endangered/Threatened species, native habitat) in the Lower Keys.”The stakeholder group identified four fundamental objectives that are essential to addressing the problem: 1) Maximize a sustainable, viable, and healthy Key deer population, 2) Maximize value of Key deer to the People, 3) Minimize deer-related negative impacts to biodiversity, and 4) Minimize costs. In addition, the group identified 25 additional objectives that, if met, would help meet the fundamental objectives. The objectives network and measurable attributes identified by the stakeholder group can be used in the future to develop and evaluate potential management alternatives.

Space Suit Portable Life Support System Test Bed (PLSS 1.0) Development and Testing

NASA Technical Reports Server (NTRS)

Watts, Carly; Campbell, Colin; Vogel, Matthew; Conger, Bruce

2012-01-01

A multi-year effort has been carried out at NASA-JSC to develop an advanced extra-vehicular activity Portable Life Support System (PLSS) design intended to further the current state of the art by increasing operational flexibility, reducing consumables, and increasing robustness. Previous efforts have focused on modeling and analyzing the advanced PLSS architecture, as well as developing key enabling technologies. Like the current International Space Station Extra-vehicular Mobility Unit PLSS, the advanced PLSS comprises three subsystems required to sustain the crew during extra-vehicular activity including the Thermal, Ventilation, and Oxygen Subsystems. This multi-year effort has culminated in the construction and operation of PLSS 1.0, a test bed that simulates full functionality of the advanced PLSS design. PLSS 1.0 integrates commercial off the shelf hardware with prototype technology development components, including the primary and secondary oxygen regulators, Ventilation Subsystem fan, Rapid Cycle Amine swingbed carbon dioxide and water vapor removal device, and Spacesuit Water Membrane Evaporator heat rejection device. The overall PLSS 1.0 test objective was to demonstrate the capability of the Advanced PLSS to provide key life support functions including suit pressure regulation, carbon dioxide and water vapor removal, thermal control and contingency purge operations. Supplying oxygen was not one of the specific life support functions because the PLSS 1.0 test was not oxygen rated. Nitrogen was used for the working gas. Additional test objectives were to confirm PLSS technology development components performance within an integrated test bed, identify unexpected system level interactions, and map the PLSS 1.0 performance with respect to key variables such as crewmember metabolic rate and suit pressure. Successful PLSS 1.0 testing completed 168 test points over 44 days of testing and produced a large database of test results that characterize system level and component performance. With the exception of several minor anomalies, the PLSS 1.0 test rig performed as expected; furthermore, many system responses trended in accordance with pre-test predictions.

Contour symmetry detection: the influence of axis orientation and number of objects.

PubMed

Friedenberg, J; Bertamini, M

2000-09-01

Participants discriminated symmetrical from random contours connected by straight lines to form part of one- or two-objects. In experiment one, symmetrical contours were translated or reflected and presented at vertical, horizontal, and oblique axis orientations with orientation constant within blocks. Translated two-object contours were detected more easily than one, replicating a "lock-and-key" effect obtained previously for vertical orientations only [M. Bertamini, J.D. Friedenberg, M. Kubovy, Acta Psychologica, 95 (1997) 119-140]. A second experiment extended these results to a wider variety of axis orientations under mixed block conditions. The pattern of performance for translation and reflection at different orientations corresponded in both experiments, suggesting that orientation is processed similarly in the detection of these symmetries.

A colour image reproduction framework for 3D colour printing

NASA Astrophysics Data System (ADS)

Xiao, Kaida; Sohiab, Ali; Sun, Pei-li; Yates, Julian M.; Li, Changjun; Wuerger, Sophie

2016-10-01

In this paper, the current technologies in full colour 3D printing technology were introduced. A framework of colour image reproduction process for 3D colour printing is proposed. A special focus was put on colour management for 3D printed objects. Two approaches, colorimetric colour reproduction and spectral based colour reproduction are proposed in order to faithfully reproduce colours in 3D objects. Two key studies, colour reproduction for soft tissue prostheses and colour uniformity correction across different orientations are described subsequently. Results are clear shown that applying proposed colour image reproduction framework, performance of colour reproduction can be significantly enhanced. With post colour corrections, a further improvement in colour process are achieved for 3D printed objects.

Engine Tune-Up Service. Unit 1: Battery and Cranking System. Posttests. Automotive Mechanics Curriculum.

ERIC Educational Resources Information Center

Goodson-Roberts, Ludy; And Others

This book of posttests is designed to accompany the Engine Tune-Up Service Student Guide for Unit 1, Battery and Cranking System. Focus of the posttests is the testing of the battery and cranking system. Four multiple choice posttests are provided, one for each of the performance objectives contained in the unit. (No answer keys are provided.)…

Learning Collaborations between ACE and Vocational Education and Training Providers: Good Practice Partnerships. A National Vocational Education and Training Research and Evaluation Program Report

ERIC Educational Resources Information Center

Gelade, Sue; Stehlik, Tom; Willis, Peter

2006-01-01

This project developed in response to the national research priority of the role of vocational education and training (VET) in building economic and social capital in regions and communities. Several key streams of work have been identified in relation to this objective, including regional segmentation, indicators and performance measures, and…

Joint Terminal Attack Controllers Sensors and Lasers Modernization

DTIC Science & Technology

2012-09-01

and Evaluation Activity MCSC Marine Corps Systems Command MCT Marine Corps Task MCTL Marine Corps Task List MEMS MicroElectroMechanical Systems...functional relationship of the key performance requirements was associated to Marine Corps Tasks ( MCT ), Critical Operational Issues (COIs...to an accomplishment of mission objectives and achievement of desired results [5]. All COIs are linked to a MCT , which are provided within the

Direct and indirect impacts of crop-livestock organization on mixed crop-livestock systems sustainability: a model-based study.

PubMed

Sneessens, I; Veysset, P; Benoit, M; Lamadon, A; Brunschwig, G

2016-11-01

Crop-livestock production is claimed more sustainable than specialized production systems. However, the presence of controversial studies suggests that there must be conditions of mixing crop and livestock productions to allow for higher sustainable performances. Whereas previous studies focused on the impact of crop-livestock interactions on performances, we posit here that crop-livestock organization is a key determinant of farming system sustainability. Crop-livestock organization refers to the percentage of the agricultural area that is dedicated to each production. Our objective is to investigate if crop-livestock organization has both a direct and an indirect impact on mixed crop-livestock (MC-L) sustainability. In that objective, we build a whole-farm model parametrized on representative French sheep and crop farming systems in plain areas (Vienne, France). This model permits simulating contrasted MC-L systems and their subsequent sustainability through the following indicators of performance: farm income, production, N balance, greenhouse gas (GHG) emissions (/kg product) and MJ consumption (/kg product). Two MC-L systems were simulated with contrasted crop-livestock organizations (MC20-L80: 20% of crops; MC80-L20: 80% of crops). A first scenario - constraining no crop-livestock interactions in both MC-L systems - permits highlighting that crop-livestock organization has a significant direct impact on performances that implies trade-offs between objectives of sustainability. Indeed, the MC80-L20 system is showing higher performances for farm income (+44%), livestock production (+18%) and crop GHG emissions (-14%) whereas the MC20-L80 system has a better N balance (-53%) and a lower livestock MJ consumption (-9%). A second scenario - allowing for crop-livestock interactions in both MC20-L80 and MC80-L20 systems - stated that crop-livestock organization has a significant indirect impact on performances. Indeed, even if crop-livestock interactions permit improving performances, crop-livestock organization influences the capacity of MC-L systems to benefit from crop-livestock interactions. As a consequence, we observed a decreasing performance trade-off between MC-L systems for farm income (-4%) and crop GHG emissions (-10%) whereas the gap increases for nitrogen balance (+23%), livestock production (+6%) - MJ consumption (+16%) - GHG emissions (+5%) and crop MJ consumption (+5%). However, the indirect impact of crop-livestock organization doesn't reverse the trend of trade-offs between objectives of sustainability determined by the direct impact of crop-livestock organization. As a conclusion, crop-livestock organization is a key factor that has to be taken into account when studying the sustainability of mixed crop-livestock systems.

KWOC (Key-Word-Out-of-Context) Index of US Nuclear Regulatory Commission Regulatory Guide Series

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jennings, S.D.

1990-04-01

To meet the objectives of the program funded by the Department of Energy (DOE)-Nuclear Energy (NE) Technology Support Programs, the Performance Assurance Project Office (PAPO) administers a Performance Assurance Information Program that collects, compiles, and distributes program-related information, reports, and publications for the benefit of the DOE-NE program participants. THE KWOC Index of US Nuclear Regulatory Commission Regulatory Guide Series'' is prepared as an aid in searching for specific topics in the US Nuclear Regulatory Commission, Regulatory Guide Series.

Could Blobs Fuel Storage-Based Convergence between HPC and Big Data?

DOE Office of Scientific and Technical Information (OSTI.GOV)

Matri, Pierre; Alforov, Yevhen; Brandon, Alvaro

The increasingly growing data sets processed on HPC platforms raise major challenges for the underlying storage layer. A promising alternative to POSIX-IO- compliant file systems are simpler blobs (binary large objects), or object storage systems. Such systems offer lower overhead and better performance at the cost of largely unused features such as file hierarchies or permissions. Similarly, blobs are increasingly considered for replacing distributed file systems for big data analytics or as a base for storage abstractions such as key-value stores or time-series databases. This growing interest in such object storage on HPC and big data platforms raises the question:more » Are blobs the right level of abstraction to enable storage-based convergence between HPC and Big Data? In this paper we study the impact of blob-based storage for real-world applications on HPC and cloud environments. The results show that blobbased storage convergence is possible, leading to a significant performance improvement on both platforms« less

Multidimensional evaluation of performance with experimental application of balanced scorecard: a two year experience

PubMed Central

2011-01-01

Background In today's dynamic health-care system, organizations such as hospitals are required to improve their performance for multiple stakeholders and deliver an integrated care that means to work effectively, be innovative and organize efficiently. Achieved goals and levels of quality can be successfully measured by a multidimensional approach like Balanced Scorecard (BSC). The aim of the study was to verify the opportunity to introduce BSC framework to measure performance in St. Anna University Hospital of Ferrara, applying it to the Clinical Laboratory Operative Unit in order to compare over time performance results and achievements of assigned targets. Methods In the first experience with BSC we distinguished four perspectives, according to Kaplan and Norton, identified Key Performance Areas and Key Performance Indicators, set standards and weights for each objective, collected data for all indicators, recognized cause-and-effect relationships in a strategic map. One year later we proceeded with the next data collection and analysed the preservation of framework aptitude to measure Operative Unit performance. In addition, we verified the ability to underline links between strategic actions belonging to different perspectives in producing outcomes changes. Results The BSC was found to be effective for underlining existing problems and identifying opportunities for improvements. The BSC also revealed the specific perspective contribution to overall performance enhancement. After time results comparison was possible depending on the selection of feasible and appropriate key performance indicators, which was occasionally limited by data collection problems. Conclusions The first use of BSC to compare performance at Operative Unit level, in course of time, suggested this framework can be successfully adopted for results measuring and revealing effective health factors, allowing health-care quality improvements. PMID:21586111

Multidimensional evaluation of performance with experimental application of balanced scorecard: a two year experience.

PubMed

Lupi, Silvia; Verzola, Adriano; Carandina, Gianni; Salani, Manuela; Antonioli, Paola; Gregorio, Pasquale

2011-05-17

In today's dynamic health-care system, organizations such as hospitals are required to improve their performance for multiple stakeholders and deliver an integrated care that means to work effectively, be innovative and organize efficiently. Achieved goals and levels of quality can be successfully measured by a multidimensional approach like Balanced Scorecard (BSC). The aim of the study was to verify the opportunity to introduce BSC framework to measure performance in St. Anna University Hospital of Ferrara, applying it to the Clinical Laboratory Operative Unit in order to compare over time performance results and achievements of assigned targets. In the first experience with BSC we distinguished four perspectives, according to Kaplan and Norton, identified Key Performance Areas and Key Performance Indicators, set standards and weights for each objective, collected data for all indicators, recognized cause-and-effect relationships in a strategic map. One year later we proceeded with the next data collection and analysed the preservation of framework aptitude to measure Operative Unit performance. In addition, we verified the ability to underline links between strategic actions belonging to different perspectives in producing outcomes changes. The BSC was found to be effective for underlining existing problems and identifying opportunities for improvements. The BSC also revealed the specific perspective contribution to overall performance enhancement. After time results comparison was possible depending on the selection of feasible and appropriate key performance indicators, which was occasionally limited by data collection problems. The first use of BSC to compare performance at Operative Unit level, in course of time, suggested this framework can be successfully adopted for results measuring and revealing effective health factors, allowing health-care quality improvements.

Near-infrared fluorescence image quality test methods for standardized performance evaluation

NASA Astrophysics Data System (ADS)

Kanniyappan, Udayakumar; Wang, Bohan; Yang, Charles; Ghassemi, Pejhman; Wang, Quanzeng; Chen, Yu; Pfefer, Joshua

2017-03-01

Near-infrared fluorescence (NIRF) imaging has gained much attention as a clinical method for enhancing visualization of cancers, perfusion and biological structures in surgical applications where a fluorescent dye is monitored by an imaging system. In order to address the emerging need for standardization of this innovative technology, it is necessary to develop and validate test methods suitable for objective, quantitative assessment of device performance. Towards this goal, we develop target-based test methods and investigate best practices for key NIRF imaging system performance characteristics including spatial resolution, depth of field and sensitivity. Characterization of fluorescence properties was performed by generating excitation-emission matrix properties of indocyanine green and quantum dots in biological solutions and matrix materials. A turbid, fluorophore-doped target was used, along with a resolution target for assessing image sharpness. Multi-well plates filled with either liquid or solid targets were generated to explore best practices for evaluating detection sensitivity. Overall, our results demonstrate the utility of objective, quantitative, target-based testing approaches as well as the need to consider a wide range of factors in establishing standardized approaches for NIRF imaging system performance.

Grasping the pain: motor resonance with dangerous affordances.

PubMed

Anelli, Filomena; Borghi, Anna M; Nicoletti, Roberto

2012-12-01

Two experiments, one on school-aged children and one on adults, explored the mechanisms underlying responses to an image prime (hand vs. control object) followed by graspable objects that were, in certain cases, dangerous. Participants were presented with different primes (a male, a female and a robotic grasping-hand; a male and a female static-hand; a control stimulus) and objects representing two risk levels (neutral and dangerous). The task required that a natural/artifact categorization task be performed by pressing different keys. In both adults and children graspable objects activated a facilitating motor response, while dangerous objects evoked aversive affordances, generating an interference-effect. Both children and adults were sensitive to the distinction between biological and non-biological hands, however detailed resonant mechanisms related to the hand-prime gender emerged only in adults. Implications for how the concept of "dangerous object" develops and the relationship between resonant mechanisms and perception of danger are discussed. Copyright © 2012 Elsevier Inc. All rights reserved.

Optical encryption of multiple three-dimensional objects based on multiple interferences and single-pixel digital holography

NASA Astrophysics Data System (ADS)

Wang, Ying; Liu, Qi; Wang, Jun; Wang, Qiong-Hua

2018-03-01

We present an optical encryption method of multiple three-dimensional objects based on multiple interferences and single-pixel digital holography. By modifying the Mach–Zehnder interferometer, the interference of the multiple objects beams and the one reference beam is used to simultaneously encrypt multiple objects into a ciphertext. During decryption, each three-dimensional object can be decrypted independently without having to decrypt other objects. Since the single-pixel digital holography based on compressive sensing theory is introduced, the encrypted data of this method is effectively reduced. In addition, recording fewer encrypted data can greatly reduce the bandwidth of network transmission. Moreover, the compressive sensing essentially serves as a secret key that makes an intruder attack invalid, which means that the system is more secure than the conventional encryption method. Simulation results demonstrate the feasibility of the proposed method and show that the system has good security performance. Project supported by the National Natural Science Foundation of China (Grant Nos. 61405130 and 61320106015).

FH/MFSK performance in multitone jamming

NASA Technical Reports Server (NTRS)

Levitt, B. K.

1985-01-01

The performance of frequency-hopped (FH) M-ary frequency-shift keyed (MFSK) signals in partial-band noise was analyzed in the open literature. The previous research is extended to the usually more effective class of multitone jamming. Some objectives researched are: (1) To categorize several different multitone jamming strategies; (2) To analyze the performance of FH/MSFK signaling, both uncoded with diversity, assuming a noncoherent energy detection metric with linear combining and perfect jamming state side information, in the presence of worst case interference for each of these multitone categories; and (3) To compare the effectiveness of the various multitone jamming techniques, and contrast the results with the partial band noise jamming case.

The Rise and Fall of Priming: How Visual Exposure Shapes Cortical Representations of Objects

PubMed Central

Zago, Laure; Fenske, Mark J.; Aminoff, Elissa; Bar, Moshe

2006-01-01

How does the amount of time for which we see an object influence the nature and content of its cortical representation? To address this question, we varied the duration of initial exposure to visual objects and then measured functional magnetic resonance imaging (fMRI) signal and behavioral performance during a subsequent repeated presentation of these objects. We report a novel ‘rise-and-fall’ pattern relating exposure duration and the corresponding magnitude of fMRI cortical signal. Compared with novel objects, repeated objects elicited maximal cortical response reduction when initially presented for 250 ms. Counter-intuitively, initially seeing an object for a longer duration significantly reduced the magnitude of this effect. This ‘rise-and-fall’ pattern was also evident for the corresponding behavioral priming. To account for these findings, we propose that the earlier interval of an exposure to a visual stimulus results in a fine-tuning of the cortical response, while additional exposure promotes selection of a subset of key features for continued representation. These two independent mechanisms complement each other in shaping object representations with experience. PMID:15716471

Machine learning for real time remote detection

NASA Astrophysics Data System (ADS)

Labbé, Benjamin; Fournier, Jérôme; Henaff, Gilles; Bascle, Bénédicte; Canu, Stéphane

2010-10-01

Infrared systems are key to providing enhanced capability to military forces such as automatic control of threats and prevention from air, naval and ground attacks. Key requirements for such a system to produce operational benefits are real-time processing as well as high efficiency in terms of detection and false alarm rate. These are serious issues since the system must deal with a large number of objects and categories to be recognized (small vehicles, armored vehicles, planes, buildings, etc.). Statistical learning based algorithms are promising candidates to meet these requirements when using selected discriminant features and real-time implementation. This paper proposes a new decision architecture benefiting from recent advances in machine learning by using an effective method for level set estimation. While building decision function, the proposed approach performs variable selection based on a discriminative criterion. Moreover, the use of level set makes it possible to manage rejection of unknown or ambiguous objects thus preserving the false alarm rate. Experimental evidences reported on real world infrared images demonstrate the validity of our approach.

System Engineering the Space Infrared Interferometric Telescope (SPIRIT)

NASA Technical Reports Server (NTRS)

Hyde, Tristram T.; Leisawitz, David T.; Rinehart, Stephen

2007-01-01

The Space Infrared Interferometric Telescope (SPIRIT) was designed to accomplish three scientific objectives: (1) learn how planetary systems form from protostellar disks and how they acquire their inhomogeneous chemical composition; (2) characterize the family of extrasolar planetary systems by imaging the structure in debris disks to understand how and where planets of different types form; and (3) learn how high-redshift galaxies formed and merged to form the present-day population of galaxies. SPIRIT will accomplish these objectives through infrared observations with a two aperture interferometric instrument. This paper gives an overview of SPIRIT design and operation, and how the three design cycle concept study was completed. The error budget for several key performance values allocates tolerances to all contributing factors, and a performance model of the spacecraft plus instrument system demonstrates meeting those allocations with margin.

Quantitative Evaluation of Performance in Interventional Neuroradiology: An Integrated Curriculum Featuring Theoretical and Practical Challenges

PubMed Central

Ernst, Marielle; Kriston, Levente; Romero, Javier M.; Frölich, Andreas M.; Jansen, Olav; Fiehler, Jens; Buhk, Jan-Hendrik

2016-01-01

Purpose We sought to develop a standardized curriculum capable of assessing key competencies in Interventional Neuroradiology by the use of models and simulators in an objective, quantitative, and efficient way. In this evaluation we analyzed the associations between the practical experience, theoretical knowledge, and the skills lab performance of interventionalists. Materials and Methods We evaluated the endovascular skills of 26 participants of the Advanced Course in Endovascular Interventional Neuroradiology of the European Society of Neuroradiology with a set of three tasks (aneurysm coiling and thrombectomy in a virtual simulator and placement of an intra-aneurysmal flow disruptor in a flow model). Practical experience was assessed by a survey. Participants completed a written and oral examination to evaluate theoretical knowledge. Bivariate and multivariate analyses were performed. Results In multivariate analysis knowledge of materials and techniques in Interventional Neuroradiology was moderately associated with skills in aneurysm coiling and thrombectomy. Experience in mechanical thrombectomy was moderately associated with thrombectomy skills, while age was negatively associated with thrombectomy skills. We found no significant association between age, sex, or work experience and skills in aneurysm coiling. Conclusion Our study gives an example of how an integrated curriculum for reasonable and cost-effective assessment of key competences of an interventional neuroradiologist could look. In addition to traditional assessment of theoretical knowledge practical skills are measured by the use of endovascular simulators yielding objective, quantitative, and constructive data for the evaluation of the current performance status of participants as well as the evolution of their technical competency over time. PMID:26848840

Research pressure instrumentation for NASA space shuttle main engine

NASA Technical Reports Server (NTRS)

Anderson, P. J.; Nussbaum, P.; Gustafson, G.

1985-01-01

The breadboard feasibility model of a silicon piezoresistive pressure transducer suitable for space shuttle main engine (SSME) applications was demonstrated. The development of pressure instrumentation for the SSME was examined. The objective is to develop prototype pressure transducers which are targeted to meet the SSME performance design goals and to fabricate, test and deliver a total of 10 prototype units. Effective utilization of the many advantages of silicon piezoresistive strain sensing technology to achieve the objectives of advanced state-of-the-art pressure sensors for reliability, accuracy and ease of manufacture is analyzed. Integration of multiple functions on a single chip is the key attribute of the technology.

A video-based system for hand-driven stop-motion animation.

PubMed

Han, Xiaoguang; Fu, Hongbo; Zheng, Hanlin; Liu, Ligang; Wang, Jue

2013-01-01

Stop-motion is a well-established animation technique but is often laborious and requires craft skills. A new video-based system can animate the vast majority of everyday objects in stop-motion style, more flexibly and intuitively. Animators can perform and capture motions continuously instead of breaking them into increments and shooting one still picture per increment. More important, the system permits direct hand manipulation without resorting to rigs, achieving more natural object control for beginners. The system's key component is two-phase keyframe-based capturing and processing, assisted by computer vision techniques. With this system, even amateurs can generate high-quality stop-motion animations.

Learning Objects and the Development of Students' Key Competencies: A New Zealand School Experience

ERIC Educational Resources Information Center

Falloon, Garry

2010-01-01

This paper outlines a study investigating the impact of the use of learning objects on the development of two key competencies from the revised New Zealand Curriculum Framework (Ministry of Education, 2007). It specifically focuses on the key competencies of "thinking" and "relating to others", and explores how teachers in an…

Experience measuring performance improvement in multiphase picture archiving and communications systems implementations.

PubMed

Reed, G; Reed, D H

1999-05-01

When planning a picture archiving and communications system (PACS) implementation and determining which equipment will be implemented in earlier and later phases, collection and analysis of selected data will aid in setting implementation priorities. If baseline data are acquired relative to performance objectives, the same information used for implementation planning can be used to measure performance improvement and outcomes. The main categories of data to choose from are: (1) financial data; (2) productivity data; (3) operational parameters; (4) clinical data; and (5) information about customer satisfaction. In the authors' experience, detailed workflow data have not proved valuable in measuring PACS performance and outcomes. Reviewing only one category of data in planning will not provide adequate basis for targeting operational improvements that will lead to the most significant gains. Quality improvement takes into account all factors in production: human capacity, materials, operating capital and assets. Once we have identified key areas of focus for quality improvement in each phase, we can translate objectives into implementation requirements and finally into detailed functional and performance requirements. Here, Integration Resources reports its experience measuring PACS performance relative to phased implementation strategies for three large medical centers. Each medical center had its own objectives for overcoming image management, physical/geographical, and functional/technical barriers. The report outlines (1) principal financial and nonfinancial measures used as performance indicators; (2) implementation strategies chosen by each of the three medical centers; and (3) the results of those strategies as compared with baseline data.

Multidimensional evaluation of performance: experimental application of the balanced scorecard in Ferrara university hospital

PubMed Central

Verzola, Adriano; Bentivegna, Roberto; Carandina, Gianni; Trevisani, Lucio; Gregorio, Pasquale; Mandini, Alberto

2009-01-01

Background and Aims One of the best-known performance planning and evaluation techniques utilising both monetary and non-monetary data is the Balanced Scorecard (BSC). This is a means of rationalising the global activity of a business in the attempt to create value, and to translate the company vision into a set of tactical objectives and measurable strategies. The aim of this study was to implement and evaluate the use of BSC in two departments of the St. Anna University Hospital, Ferrara: the Analysis Laboratory and Digestive Endoscopy operating units (OU). Materials and methods With the collaboration of the health workers involved, a precise methodological programme was pursued: Definition of the strategic map from 4 perspectives, according to Kaplan and Norton, Definition of the Key Performance Areas (KPA), or macro-objectives, Identification of the cause-effect relationships between KPAs, Identification of the sub-objectives of each KPA, Definition of the Key Performance Indicators (KPI), Definition of the weight/importance of each objective in the global evaluation. Results The information gathered permitted the definition of macro- and sub-objectives for each perspective, as well as determining the relevant indicators, standards, weights, frequency of detection and means of acquisition. Strategic maps showing the cause/effect relationships in each OU were created, as were 'evaluation panels', which describe the global performance of each department. For each perspective, the fundamental data were summarised in one table. Evaluation of each perspective yielded a positive result for the majority of the objectives, and the global result (including all 4 perspectives) was found to be satisfactory. Discussion-Conclusion The Balanced Scorecard was implemented in the abovementioned OUs of St. Anna University Hospital, Ferrara, after the health workers themselves realised the need for change. In our research the employees were pleased to be evaluated, not only for the financial outcomes, but also for the satisfaction of improving internal procedure, relationships with the community and their own growth/learning. BSC is an ideal point of contact between the financial and clinical dimensions of management. However, difficulties in its application were faced, among these, at least in the initial phase, the lack of information systems able to drive it, and the complexity of the research for specific indicators needed to be overcome. The time factor (on average, at least two years are required) and the availability of technological resources were also limiting factors. The rapid diffusion of BSC among the principal international profit and non-profit organisations is testament to its great potential. This project could be seen as a preparatory phase in the strategical analysis of a subsequent business plan. PMID:19737409

Nuclear electric propulsion mission engineering study development program and costs estimates, Phase 2 review

NASA Technical Reports Server (NTRS)

1972-01-01

The results are presented of the second six-month performance period of the Nuclear Electric Propulsion Mission Engineering Study. A brief overview of the program, identifying the study objectives and approach, and a discussion of the program status and schedule are presented. The program results are reviewed and key conclusions to date are summarized. Planned effort for the remainder of the program is reviewed.

Distributed Object Technology with CORBA and Java: Key Concepts and Implications.

DTIC Science & Technology

1997-06-01

commercial use should be addressed to the SEI Licensing Agent. NO WARRANTY THIS CARNEGIE MELLON UNIVERSITY AND SOFTWARE ENGINEERING INSTITUTE MATERIAL...retrieval. This power is not derived from the language per se, but from the architecture-neutral approach used by Java. The Java Virtual Machine...pattern that is focused on performance considerations, the PCo archi- tecture also uses CORBA interface definition language (IDL) to model the

[Development of key indicators for nurses performance evaluation and estimation of their weights for management by objectives].

PubMed

Lee, Eun Hwa; Ahn, Sung Hee

2010-02-01

This methodological research was designed to develop performance evaluation key indicators (PEKIs) for management by objectives (MBO) and to estimate their weights for hospital nurses. The PEKIs were developed by selecting preliminary indicators from a literature review, examining content validity and identifying their level of importance. Data were collected from November 14, 2007 to February 18, 2008. Data set for importance of indicators was obtained from 464 nurses and weights of PEKIs domain was from 453 nurses, who worked for at least 2 yr in one of three hospitals. Data were analyzed using X(2)-test, factor analysis, and the Analytical Hierarchy Process. Based upon Content Validity Index of .8 or above, 61 indicators were selected from the 100 preliminary indicators. Finally, 40 PEKIs were developed from the 61 indicators, and categorized into 10 domains. The highest weight of the 10 domains was customer satisfaction, which was followed by patient education, direct nursing care, profit increase, safety management, improvement of nursing quality, completeness of nursing records, enhancing competence of nurses, indirect nursing care, and cost reduction, in that order. PEKIs and their weights can be utilized for impartial evaluation and MBO for hospital nurses. Further research to verify PEKIs would lead to successful implementation of MBO.

First Annual Progress Report on Transmission of Information by Acoustic Communication along Metal Pathways in Nuclear Facilities

DOE Office of Scientific and Technical Information (OSTI.GOV)

Heifetz, A.; Bakhtiari, S.; Huang, X.

The objective of this project is to develop and demonstrate methods for transmission of information in nuclear facilities by acoustic means along existing in-place metal piping infrastructure. Pipes are omnipresent in a nuclear facility, and penetrate enclosures and partitions, such as the containment building wall. In the envisioned acoustic communication (AC) system, packets of information will be transmitted as guided acoustic waves along pipes. Performance of AC hardware and network protocols for efficient and secure communications under development in this project will be eventually evaluated in a representative nuclear power plant environment. Research efforts in the first year of thismore » project have been focused on identification of appropriate transducers, and evaluation of their performance for information transmission along nuclear-grade metallic pipes. COMSOL computer simulations were performed to study acoustic wave generation, propagation, and attenuation on pipes. An experimental benchtop system was used to evaluate signal attenuation and spectral dispersion using piezo-electric transducers (PZTs) and electromagnetic acoustic transducers (EMATs). Communication protocols under evaluation consisted on-off keying (OOK) signal modulation, in particular amplitude shift keying (ASK) and phase shift keying (PSK). Tradeoffs between signal power and communication data rate were considered for ASK and PSK coding schemes.« less

Comparison of the performance of intraoral X-ray sensors using objective image quality assessment.

PubMed

Hellén-Halme, Kristina; Johansson, Curt; Nilsson, Mats

2016-05-01

The main aim of this study was to evaluate the performance of 10 individual sensors of the same make, using objective measures of key image quality parameters. A further aim was to compare 8 brands of sensors. Ten new sensors of 8 different models from 6 manufacturers (i.e., 80 sensors) were included in the study. All sensors were exposed in a standardized way using an X-ray tube voltage of 60 kVp and different exposure times. Sensor response, noise, low-contrast resolution, spatial resolution and uniformity were measured. Individual differences between sensors of the same brand were surprisingly large in some cases. There were clear differences in the characteristics of the different brands of sensors. The largest variations were found for individual sensor response for some of the brands studied. Also, noise level and low contrast resolution showed large variations between brands. Sensors, even of the same brand, vary significantly in their quality. It is thus valuable to establish action levels for the acceptance of newly delivered sensors and to use objective image quality control for commissioning purposes and periodic checks to ensure high performance of individual digital sensors. Copyright © 2016 Elsevier Inc. All rights reserved.

Three-Dimensional Printing with Biomass-Derived PEF for Carbon-Neutral Manufacturing.

PubMed

Kucherov, Fedor A; Gordeev, Evgeny G; Kashin, Alexey S; Ananikov, Valentine P

2017-12-11

Biomass-derived poly(ethylene-2,5-furandicarboxylate) (PEF) has been used for fused deposition modeling (FDM) 3D printing. A complete cycle from cellulose to the printed object has been performed. The printed PEF objects created in the present study show higher chemical resistance than objects printed with commonly available materials (acrylonitrile butadiene styrene (ABS), polylactic acid (PLA), glycol-modified poly(ethylene terephthalate) (PETG)). The studied PEF polymer has shown key advantages for 3D printing: optimal adhesion, thermoplasticity, lack of delamination and low heat shrinkage. The high thermal stability of PEF and relatively low temperature that is necessary for extrusion are optimal for recycling printed objects and minimizing waste. Several successive cycles of 3D printing and recycling were successfully shown. The suggested approach for extending additive manufacturing to carbon-neutral materials opens a new direction in the field of sustainable development. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

An experimental comparison of online object-tracking algorithms

NASA Astrophysics Data System (ADS)

Wang, Qing; Chen, Feng; Xu, Wenli; Yang, Ming-Hsuan

2011-09-01

This paper reviews and evaluates several state-of-the-art online object tracking algorithms. Notwithstanding decades of efforts, object tracking remains a challenging problem due to factors such as illumination, pose, scale, deformation, motion blur, noise, and occlusion. To account for appearance change, most recent tracking algorithms focus on robust object representations and effective state prediction. In this paper, we analyze the components of each tracking method and identify their key roles in dealing with specific challenges, thereby shedding light on how to choose and design algorithms for different situations. We compare state-of-the-art online tracking methods including the IVT,1 VRT,2 FragT,3 BoostT,4 SemiT,5 BeSemiT,6 L1T,7 MILT,8 VTD9 and TLD10 algorithms on numerous challenging sequences, and evaluate them with different performance metrics. The qualitative and quantitative comparative results demonstrate the strength and weakness of these algorithms.

Implementation of the Global Parameters Determination in Gaia's Astrometric Solution (AGIS)

NASA Astrophysics Data System (ADS)

Raison, F.; Olias, A.; Hobbs, D.; Lindegren, L.

2010-12-01

Gaia is ESA’s space astrometry mission with a foreseen launch date in early 2012. Its main objective is to perform a stellar census of the 1000 Million brightest objects in our galaxy (completeness to V=20 mag) from which an astrometric catalog of micro-arcsec level accuracy will be constructed. A key element in this endeavor is the Astrometric Global Iterative Solution (AGIS). A core part of AGIS is to determine the accurate spacecraft attitude, geometric instrument calibration and astrometric model parameters for a well-behaved subset of all the objects (the ‘primary stars’). In addition, a small number of global parameters will be estimated, one of these being PPN γ. We present here the implementation of the algorithms dedicated to the determination of the global parameters.

Balancing Authority Cooperation Concepts - Intra-Hour Scheduling

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hunsaker, Matthew; Samaan, Nader; Milligan, Michael

2013-03-29

The overall objective of this study was to understand, on an Interconnection-wide basis, the effects intra-hour scheduling compared to hourly scheduling. Moreover, the study sought to understand how the benefits of intra-hour scheduling would change by altering the input assumptions in different scenarios. This report describes results of three separate scenarios with differing key assumptions and comparing the production costs between hourly scheduling and 10-minute scheduling performance. The different scenarios were chosen to provide insight into how the estimated benefits might change by altering input assumptions. Several key assumptions were different in the three scenarios, however most assumptions were similarmore » and/or unchanged among the scenarios.« less

Predictors of Long-Term Change in Adult Cognitive Performance: Systematic Review and Data from the Northern Finland Birth Cohort 1966.

PubMed

Rannikko, Irina; Jääskeläinen, Erika; Miettunen, Jouko; Ahmed, Anthony O; Veijola, Juha; Remes, Anne M; Murray, Graham K; Husa, Anja P; Järvelin, Marjo-Riitta; Isohanni, Matti; Haapea, Marianne

2016-01-01

Several social life events and challenges have an impact on cognitive development. Our goal was to analyze the predictors of change in cognitive performance in early midlife in a general population sample. Additionally, systematic literature review was performed. The study sample was drawn from the Northern Finland Birth Cohort 1966 at the ages of 34 and 43 years. Primary school performance, sociodemographic factors and body mass index (BMI) were used to predict change in cognitive performance measured by the California Verbal Learning Test, Visual Object Learning Test, and Abstraction Inhibition and Working Memory task. Analyses were weighted by gender and education, and p-values were corrected for multiple comparisons using Benjamini-Hochberg procedure (B-H). Male gender predicted decrease in episodic memory. Poor school marks of practical subjects, having no children, and increase in BMI were associated with decrease in episodic memory, though non-significantly after B-H. Better school marks, and higher occupational class were associated with preserved performance in visual object learning. Higher vocational education predicted preserved performance in visual object learning test, though non-significantly after B-H. Likewise, having children predicted decreased performance in executive functioning but non-significantly after B-H. Adolescent cognitive ability, change in BMI and several sociodemographic factors appear to predict cognitive changes in early midlife. The key advantage of present study is the exploration of possible predictors of change in cognitive performance among general population in the early midlife, a developmental period that has been earlier overlooked.

[Development and Application of a Performance Prediction Model for Home Care Nursing Based on a Balanced Scorecard using the Bayesian Belief Network].

PubMed

Noh, Wonjung; Seomun, Gyeongae

2015-06-01

This study was conducted to develop key performance indicators (KPIs) for home care nursing (HCN) based on a balanced scorecard, and to construct a performance prediction model of strategic objectives using the Bayesian Belief Network (BBN). This methodological study included four steps: establishment of KPIs, performance prediction modeling, development of a performance prediction model using BBN, and simulation of a suggested nursing management strategy. An HCN expert group and a staff group participated. The content validity index was analyzed using STATA 13.0, and BBN was analyzed using HUGIN 8.0. We generated a list of KPIs composed of 4 perspectives, 10 strategic objectives, and 31 KPIs. In the validity test of the performance prediction model, the factor with the greatest variance for increasing profit was maximum cost reduction of HCN services. The factor with the smallest variance for increasing profit was a minimum image improvement for HCN. During sensitivity analysis, the probability of the expert group did not affect the sensitivity. Furthermore, simulation of a 10% image improvement predicted the most effective way to increase profit. KPIs of HCN can estimate financial and non-financial performance. The performance prediction model for HCN will be useful to improve performance.

Analysis of performance measurement at HR-GR Department using the balance scorecard method

NASA Astrophysics Data System (ADS)

Vienni; Bachtiar, M.

2017-12-01

PT. X is a company engaged in logistics service in Indonesia. Every company will certainly face a dynamic business environment. Competitors not only from domestic but also from overseas. To be successful in achieving its objectives, company should have a comprehensive measurement system as a strategy feedback that will drive the performance of company. HR-GA department is department that coordinate directly with company’s management. Company through departments expect development goals in individual and also support of infrastructure will run smoothly. In 2015, company has taken steps to conduct a balanced scorecard as performance measurement. Nevertheless, a number of factors so it cannot run optimally. This study aims to analyse the current system and provided suggestions in order to give an overview to department related to its current performance. The results of data processing show that there are 8 objective strategies that have been formulated with 9 key performance indicators. Based on the results of scorecard, obtained values of 4.44 for customer perspective, 4.32 for internal business process perspective & 5.00 for learning and growth perspective. It concludes that performance based on perspectives are categorized very well

Space shuttle main engine: Interactive design challenges

NASA Technical Reports Server (NTRS)

Mccarty, J. P.; Wood, B. K.

1985-01-01

The operating requirements established by NASA for the SSME were considerably more demanding than those for earlier rocket engines used in the military launch vehicles or Apollo program. The SSME, in order to achieve the high performance, low weight, long life, reusable objectives, embodied technical demands far in excess of its predecessor rocket engines. The requirements dictated the use of high combustion pressure and the staged combustion cycle which maximizes performance through total use of all propellants in the main combustion process. This approach presented a myriad of technical challenges for maximization of performance within attainable state of the art capabilities for operating pressures, operating temperatures and rotating machinery efficiencies. Controlling uniformity of the high pressure turbomachinery turbine temperature environment was a key challenge for thrust level and life capability demanding innovative engineering. New approaches in the design of the components were necessary to accommodate the multiple use, minimum maintenance objectives. Included were the use of line replaceable units to facilitate field maintenance automatic checkout and internal inspection capabilities.

A High Performance Computing Study of a Scalable FISST-Based Approach to Multi-Target, Multi-Sensor Tracking

NASA Astrophysics Data System (ADS)

Hussein, I.; Wilkins, M.; Roscoe, C.; Faber, W.; Chakravorty, S.; Schumacher, P.

2016-09-01

Finite Set Statistics (FISST) is a rigorous Bayesian multi-hypothesis management tool for the joint detection, classification and tracking of multi-sensor, multi-object systems. Implicit within the approach are solutions to the data association and target label-tracking problems. The full FISST filtering equations, however, are intractable. While FISST-based methods such as the PHD and CPHD filters are tractable, they require heavy moment approximations to the full FISST equations that result in a significant loss of information contained in the collected data. In this paper, we review Smart Sampling Markov Chain Monte Carlo (SSMCMC) that enables FISST to be tractable while avoiding moment approximations. We study the effect of tuning key SSMCMC parameters on tracking quality and computation time. The study is performed on a representative space object catalog with varying numbers of RSOs. The solution is implemented in the Scala computing language at the Maui High Performance Computing Center (MHPCC) facility.

An analysis of parameter sensitivities of preference-inspired co-evolutionary algorithms

NASA Astrophysics Data System (ADS)

Wang, Rui; Mansor, Maszatul M.; Purshouse, Robin C.; Fleming, Peter J.

2015-10-01

Many-objective optimisation problems remain challenging for many state-of-the-art multi-objective evolutionary algorithms. Preference-inspired co-evolutionary algorithms (PICEAs) which co-evolve the usual population of candidate solutions with a family of decision-maker preferences during the search have been demonstrated to be effective on such problems. However, it is unknown whether PICEAs are robust with respect to the parameter settings. This study aims to address this question. First, a global sensitivity analysis method - the Sobol' variance decomposition method - is employed to determine the relative importance of the parameters controlling the performance of PICEAs. Experimental results show that the performance of PICEAs is controlled for the most part by the number of function evaluations. Next, we investigate the effect of key parameters identified from the Sobol' test and the genetic operators employed in PICEAs. Experimental results show improved performance of the PICEAs as more preferences are co-evolved. Additionally, some suggestions for genetic operator settings are provided for non-expert users.

Many-objective optimization and visual analytics reveal key trade-offs for London's water supply

NASA Astrophysics Data System (ADS)

Matrosov, Evgenii S.; Huskova, Ivana; Kasprzyk, Joseph R.; Harou, Julien J.; Lambert, Chris; Reed, Patrick M.

2015-12-01

In this study, we link a water resource management simulator to multi-objective search to reveal the key trade-offs inherent in planning a real-world water resource system. We consider new supplies and demand management (conservation) options while seeking to elucidate the trade-offs between the best portfolios of schemes to satisfy projected water demands. Alternative system designs are evaluated using performance measures that minimize capital and operating costs and energy use while maximizing resilience, engineering and environmental metrics, subject to supply reliability constraints. Our analysis shows many-objective evolutionary optimization coupled with state-of-the art visual analytics can help planners discover more diverse water supply system designs and better understand their inherent trade-offs. The approach is used to explore future water supply options for the Thames water resource system (including London's water supply). New supply options include a new reservoir, water transfers, artificial recharge, wastewater reuse and brackish groundwater desalination. Demand management options include leakage reduction, compulsory metering and seasonal tariffs. The Thames system's Pareto approximate portfolios cluster into distinct groups of water supply options; for example implementing a pipe refurbishment program leads to higher capital costs but greater reliability. This study highlights that traditional least-cost reliability constrained design of water supply systems masks asset combinations whose benefits only become apparent when more planning objectives are considered.

Robust feedback zoom tracking for digital video surveillance.

PubMed

Zou, Tengyue; Tang, Xiaoqi; Song, Bao; Wang, Jin; Chen, Jihong

2012-01-01

Zoom tracking is an important function in video surveillance, particularly in traffic management and security monitoring. It involves keeping an object of interest in focus during the zoom operation. Zoom tracking is typically achieved by moving the zoom and focus motors in lenses following the so-called "trace curve", which shows the in-focus motor positions versus the zoom motor positions for a specific object distance. The main task of a zoom tracking approach is to accurately estimate the trace curve for the specified object. Because a proportional integral derivative (PID) controller has historically been considered to be the best controller in the absence of knowledge of the underlying process and its high-quality performance in motor control, in this paper, we propose a novel feedback zoom tracking (FZT) approach based on the geometric trace curve estimation and PID feedback controller. The performance of this approach is compared with existing zoom tracking methods in digital video surveillance. The real-time implementation results obtained on an actual digital video platform indicate that the developed FZT approach not only solves the traditional one-to-many mapping problem without pre-training but also improves the robustness for tracking moving or switching objects which is the key challenge in video surveillance.

Software wizards to adjust keyboard and mouse settings for people with physical impairments

PubMed Central

Koester, Heidi; Simpson, Richard; Mankowski, Jennifer

2013-01-01

Context/objective This study describes research behind two software wizards that help users with physical impairments adjust their keyboard and mouse settings to meet their specific needs. The Keyboard Wizard and Pointing Wizard programs help ensure that keyboard and pointing devices are properly configured for an individual, and reconfigured as the user's needs change. We summarize four effectiveness studies and six usability studies. Methods Studies involved participants whose physical impairments affect their ability to use a keyboard and mouse. Effectiveness studies used an A-B-A design, with condition A using default Windows settings and condition B using wizard-recommended settings. Primary data were performance metrics for text entry and target acquisition. Usability studies asked participants to run through each wizard, with no outside guidance. Primary data were completion time, errors made, and user feedback. Results The wizards were effective at recommending new settings for users who needed them and not recommending them for users who did not. Sensitivity for StickyKeys, pointer speed, and object size algorithms was 100%. Specificity for StickyKeys and pointer speed was over 80%, and 50% for object size. For those who needed settings changes, the recommendations improved performance, with speed increases ranging from 9 to 59%. Accuracy improved significantly with the wizard recommendations, eliminating up to 100% of errors. Users ran through the current wizard software in less than 6 minutes. Ease-of-use rating averaged over 4.5 on a scale of 1 to 5. Conclusion The wizards are a simple yet effective way of adjusting Windows to accommodate physical impairments. PMID:23820146

Incremental concept learning with few training examples and hierarchical classification

NASA Astrophysics Data System (ADS)

Bouma, Henri; Eendebak, Pieter T.; Schutte, Klamer; Azzopardi, George; Burghouts, Gertjan J.

2015-10-01

Object recognition and localization are important to automatically interpret video and allow better querying on its content. We propose a method for object localization that learns incrementally and addresses four key aspects. Firstly, we show that for certain applications, recognition is feasible with only a few training samples. Secondly, we show that novel objects can be added incrementally without retraining existing objects, which is important for fast interaction. Thirdly, we show that an unbalanced number of positive training samples leads to biased classifier scores that can be corrected by modifying weights. Fourthly, we show that the detector performance can deteriorate due to hard-negative mining for similar or closely related classes (e.g., for Barbie and dress, because the doll is wearing a dress). This can be solved by our hierarchical classification. We introduce a new dataset, which we call TOSO, and use it to demonstrate the effectiveness of the proposed method for the localization and recognition of multiple objects in images.

The SKA1 LOW telescope: system architecture and design performance

NASA Astrophysics Data System (ADS)

Waterson, Mark F.; Labate, Maria Grazia; Schnetler, Hermine; Wagg, Jeff; Turner, Wallace; Dewdney, Peter

2016-07-01

The SKA1-LOW radio telescope will be a low-frequency (50-350 MHz) aperture array located in Western Australia. Its scientific objectives will prioritize studies of the Epoch of Reionization and pulsar physics. Development of the telescope has been allocated to consortia responsible for the aperture array front end, timing distribution, signal and data transport, correlation and beamforming signal processors, infrastructure, monitor and control systems, and science data processing. This paper will describe the system architectural design and key performance parameters of the telescope and summarize the high-level sub-system designs of the consortia.

Optical cryptography with biometrics for multi-depth objects.

PubMed

Yan, Aimin; Wei, Yang; Hu, Zhijuan; Zhang, Jingtao; Tsang, Peter Wai Ming; Poon, Ting-Chung

2017-10-11

We propose an optical cryptosystem for encrypting images of multi-depth objects based on the combination of optical heterodyne technique and fingerprint keys. Optical heterodyning requires two optical beams to be mixed. For encryption, each optical beam is modulated by an optical mask containing either the fingerprint of the person who is sending, or receiving the image. The pair of optical masks are taken as the encryption keys. Subsequently, the two beams are used to scan over a multi-depth 3-D object to obtain an encrypted hologram. During the decryption process, each sectional image of the 3-D object is recovered by convolving its encrypted hologram (through numerical computation) with the encrypted hologram of a pinhole image that is positioned at the same depth as the sectional image. Our proposed method has three major advantages. First, the lost-key situation can be avoided with the use of fingerprints as the encryption keys. Second, the method can be applied to encrypt 3-D images for subsequent decrypted sectional images. Third, since optical heterodyning scanning is employed to encrypt a 3-D object, the optical system is incoherent, resulting in negligible amount of speckle noise upon decryption. To the best of our knowledge, this is the first time optical cryptography of 3-D object images has been demonstrated in an incoherent optical system with biometric keys.

Connectionist model-based stereo vision for telerobotics

NASA Technical Reports Server (NTRS)

Hoff, William; Mathis, Donald

1989-01-01

Autonomous stereo vision for range measurement could greatly enhance the performance of telerobotic systems. Stereo vision could be a key component for autonomous object recognition and localization, thus enabling the system to perform low-level tasks, and allowing a human operator to perform a supervisory role. The central difficulty in stereo vision is the ambiguity in matching corresponding points in the left and right images. However, if one has a priori knowledge of the characteristics of the objects in the scene, as is often the case in telerobotics, a model-based approach can be taken. Researchers describe how matching ambiguities can be resolved by ensuring that the resulting three-dimensional points are consistent with surface models of the expected objects. A four-layer neural network hierarchy is used in which surface models of increasing complexity are represented in successive layers. These models are represented using a connectionist scheme called parameter networks, in which a parametrized object (for example, a planar patch p=f(h,m sub x, m sub y) is represented by a collection of processing units, each of which corresponds to a distinct combination of parameter values. The activity level of each unit in the parameter network can be thought of as representing the confidence with which the hypothesis represented by that unit is believed. Weights in the network are set so as to implement gradient descent in an energy function.

Organizational Failure in an NHS Hospital Trust: A Qualitative Study.

PubMed

Ravaghi, Hamid; Mannion, Russell; Sajadi, Haniye Sadat

2015-01-01

The objective was to explore the key factors associated with organizational failure in an NHS Hospital Trust. This case study adopted a qualitative design. Fifty-seven semistructured interviews and document analyses were conducted as well. Data were analyzed using a framework analysis method. A range of symptoms of organizational performance failure was identified. These relate to a financial deficit, lack of good external relationships, inability to meet core targets, a lack of clear management systems, and low staff morale. These markers had not been taken seriously by the previous senior management team. Symptoms of failure were the reflection of presence of secondary and primary causes of failure. Poor managerial leadership, poor financial control and performance management, lack of open culture, distraction by 2 large projects, and the lack of clinician engagement were perceived as internal causes of failure and the high level of policy changes within the NHS as the key external cause. The level of deprivation in the area was also thought to have had a negative impact on performance. The findings reinforce and expand on those of recent studies across the public sector. Tracking an organization's performance and early diagnosis of performance problems, focusing on performance management systems, and taking into account contextual factors are issues that should be considered.

The HepHIV 2017 Conference in Malta: joining forces for the earlier diagnosis of HIV and viral hepatitis.

PubMed

Raben, D; Hoekstra, M; Sperle, I; Amato Gauci, A J; Gauci, C; West, B; Sullivan, A; Lazarus, J V; Platteau, T; Rockstroh, J K

2018-02-01

The objective of the article is to provide an overview of the results of the HepHIV 2017 Conference organized by the HIV in Europe initiative under the Maltese EU Presidency in January 2017. A thourough review of all conference presentations (oral and poster presentations) was performed to retrieve the key outcomes of the conference. The key result from the conference was a call to action summarising key priorities in HIV and viral hepatitis testing and linkage to care. This included improving monitoring of viral hepatitis and HIV, mixing testing strategies and ensuring policy support. The important contribution and outcomes of EU funded projects OptTEST and EuroHIVEdat was highlighted. An integrated approach to earlier testing and linkage to care across diseases is needed in Europe and the HepHIV conferences create an important forum to reach this aim. © 2018 British HIV Association.

A text zero-watermarking method based on keyword dense interval

NASA Astrophysics Data System (ADS)

Yang, Fan; Zhu, Yuesheng; Jiang, Yifeng; Qing, Yin

2017-07-01

Digital watermarking has been recognized as a useful technology for the copyright protection and authentication of digital information. However, rarely did the former methods focus on the key content of digital carrier. The idea based on the protection of key content is more targeted and can be considered in different digital information, including text, image and video. In this paper, we use text as research object and a text zero-watermarking method which uses keyword dense interval (KDI) as the key content is proposed. First, we construct zero-watermarking model by introducing the concept of KDI and giving the method of KDI extraction. Second, we design detection model which includes secondary generation of zero-watermark and the similarity computing method of keyword distribution. Besides, experiments are carried out, and the results show that the proposed method gives better performance than other available methods especially in the attacks of sentence transformation and synonyms substitution.

"Found Performance": Towards a Musical Methodology for Exploring the Aesthetics of Care.

PubMed

Wood, Stuart

2017-09-18

Concepts of performance in fine art reflect key processes in music therapy. Music therapy enables practitioners to reframe patients as performers, producing new meanings around the clinical knowledge attached to medical histories and constructs. In this paper, music therapy practices are considered in the wider context of art history, with reference to allied theories from social research. Tracing a century in art that has revised the performativity of found objects (starting with Duchamp's "Fountain"), and of found sound (crystallised by Cage's 4' 33) this paper proposes that music therapy might be a pioneer methodology of "found performance". Examples from music therapy and contemporary socially engaged art practices are brought as potential links between artistic methodologies and medical humanities research, with specific reference to notions of Aesthetics of Care.

Emergency department performance measures updates: proceedings of the 2014 emergency department benchmarking alliance consensus summit.

PubMed

Wiler, Jennifer L; Welch, Shari; Pines, Jesse; Schuur, Jeremiah; Jouriles, Nick; Stone-Griffith, Suzanne

2015-05-01

The objective was to review and update key definitions and metrics for emergency department (ED) performance and operations. Forty-five emergency medicine leaders convened for the Third Performance Measures and Benchmarking Summit held in Las Vegas, February 21-22, 2014. Prior to arrival, attendees were assigned to workgroups to review, revise, and update the definitions and vocabulary being used to communicate about ED performance and operations. They were provided with the prior definitions of those consensus summits that were published in 2006 and 2010. Other published definitions from key stakeholders in emergency medicine and health care were also reviewed and circulated. At the summit, key terminology and metrics were discussed and debated. Workgroups communicated online, via teleconference, and finally in a face-to-face meeting to reach consensus regarding their recommendations. Recommendations were then posted and open to a 30-day comment period. Participants then reanalyzed the recommendations, and modifications were made based on consensus. A comprehensive dictionary of ED terminology related to ED performance and operation was developed. This article includes definitions of operating characteristics and internal and external factors relevant to the stratification and categorization of EDs. Time stamps, time intervals, and measures of utilization were defined. Definitions of processes and staffing measures are also presented. Definitions were harmonized with performance measures put forth by the Centers for Medicare and Medicaid Services (CMS) for consistency. Standardized definitions are necessary to improve the comparability of EDs nationally for operations research and practice. More importantly, clear precise definitions describing ED operations are needed for incentive-based pay-for-performance models like those developed by CMS. This document provides a common language for front-line practitioners, managers, health policymakers, and researchers. © 2015 by the Society for Academic Emergency Medicine.

A Hard Look at Hard Power: Assessing the Defense Capabilities of Key U.S. Allies and Security Partners

DTIC Science & Technology

2015-07-01

Army War College,Strategic Studies Institute,47 Ashburn Drive,Carlisle,PA,17013-5010 8. PERFORMING ORGANIZATION REPORT NUMBER 9. SPONSORING/MONITORING...achieving national security objectives. The Strategic Studies Institute publishes national security and strategic research and analysis to influence...U.S. Army War College SLDR Senior Leader Development and Resiliency STRATEGIC STUDIES INSTITUTE The Strategic Studies Institute (SSI) is part of the

DOD Inventory of Contracted Services: Timely Decisions and Further Actions Needed to Address Long Standing Issues

DTIC Science & Technology

2016-10-01

which contractors were providing services that are closely associated with inherently governmental functions, a key review objective to help ensure...or dinapolit@gao.gov. Why GAO Did This Study DOD is the government’s largest purchaser of contractor -provided services. In 2008, Congress...required DOD to compile and review an annual inventory of its contracted services to identify the number of contractors performing services and the

DOE Office of Scientific and Technical Information (OSTI.GOV)

Black, Billy D.; Akhil, Abbas Ali

This is the final report on a field evaluation by the Department of the Navy of twenty 5-kW PEM fuel cells carried out during 2004 and 2005 at five Navy sites located in New York, California, and Hawaii. The key objective of the effort was to obtain an engineering assessment of their military applications. Particular issues of interest were fuel cell cost, performance, reliability, and the readiness of commercial fuel cells for use as a standalone (grid-independent) power option. Two corollary objectives of the demonstration were to promote technological advances and to improve fuel performance and reliability. From a costmore » perspective, the capital cost of PEM fuel cells at this stage of their development is high compared to other power generation technologies. Sandia National Laboratories technical recommendation to the Navy is to remain involved in evaluating successive generations of this technology, particularly in locations with greater environmental extremes, and it encourages their increased use by the Navy.« less

Performance Review of Harmony Search, Differential Evolution and Particle Swarm Optimization

NASA Astrophysics Data System (ADS)

Mohan Pandey, Hari

2017-08-01

Metaheuristic algorithms are effective in the design of an intelligent system. These algorithms are widely applied to solve complex optimization problems, including image processing, big data analytics, language processing, pattern recognition and others. This paper presents a performance comparison of three meta-heuristic algorithms, namely Harmony Search, Differential Evolution, and Particle Swarm Optimization. These algorithms are originated altogether from different fields of meta-heuristics yet share a common objective. The standard benchmark functions are used for the simulation. Statistical tests are conducted to derive a conclusion on the performance. The key motivation to conduct this research is to categorize the computational capabilities, which might be useful to the researchers.

Numerical aerodynamic simulation facility. Preliminary study extension

NASA Technical Reports Server (NTRS)

1978-01-01

The production of an optimized design of key elements of the candidate facility was the primary objective of this report. This was accomplished by effort in the following tasks: (1) to further develop, optimize and describe the function description of the custom hardware; (2) to delineate trade off areas between performance, reliability, availability, serviceability, and programmability; (3) to develop metrics and models for validation of the candidate systems performance; (4) to conduct a functional simulation of the system design; (5) to perform a reliability analysis of the system design; and (6) to develop the software specifications to include a user level high level programming language, a correspondence between the programming language and instruction set and outline the operation system requirements.

Performance analysis of SS7 congestion controls under sustained overload

NASA Astrophysics Data System (ADS)

Manfield, David R.; Millsteed, Gregory K.; Zukerman, Moshe

1994-04-01

Congestion controls are a key factor in achieving the robust performance required of common channel signaling (CCS) networks in the face of partial network failures and extreme traffic loads, especially as networks become large and carry high traffic volume. The CCITT recommendations define a number of types of congestion control, and the parameters of the controls must be well set in order to ensure their efficacy under transient and sustained signalling network overload. The objective of this paper is to present a modeling approach to the determination of the network parameters that govern the performance of the SS7 congestion controls under sustained overload. Results of the investigation by simulation are presented and discussed.

A new helium gas bearing turboexpander

NASA Astrophysics Data System (ADS)

Xiong, L. Y.; Chen, C. Z.; Liu, L. Q.; Hou, Y.; Wang, J.; Lin, M. F.

2002-05-01

A new helium gas bearing turboexpander of a helium refrigeration system used for space environment simulation experiments is described in this paper. The main design parameters and construction type of some key parts are presented. An improved calculation of thermodynamic efficiency and instability speed of this turboexpander has been obtained by a multiple objects optimization program. Experiments of examining mechanical and thermodynamic performance have been repeatedly conducted in the laboratory by using air at ambient and liquid nitrogen temperature, respectively. In order to predict the helium turboexpander performance, a similarity principles study has been developed. According to the laboratory and on-the-spot experiments, the mechanical and thermodynamic performances of this helium turboexpander are excellent.

Skilful force control in expert pianists.

PubMed

Oku, Takanori; Furuya, Shinichi

2017-05-01

Dexterous object manipulation in skilful behaviours such as surgery, craft making, and musical performance involves fast, precise, and efficient control of force with the fingers. A challenge in playing musical instruments is the requirement of independent control of the magnitude and rate of force production, which typically vary in relation to loudness and tempo. However, it is unknown how expert musicians skilfully control finger force to elicit tones with a wide range of loudness and tempi. Here, we addressed this issue by comparing the variation of spatiotemporal characteristics of force during repetitive and simultaneous piano keystrokes in relation to the loudness and tempo between pianists and musically untrained individuals. While the peak key-descending velocity varied with loudness but not with tempo in both groups, the peak and impulse of the key-depressing force were smaller in pianists than in the non-musicians, specifically when eliciting loud tones, suggesting superior energetic efficiency in the trained individuals. The key-depressing force was more consistent across strikes in pianists than in the non-musicians at all loudness levels but only at slow tempi, confirming expertise-dependency of precise force control. A regression analysis demonstrated that individual differences in the keystroke rates when playing at the fastest tempo across the trained pianists were negatively associated with the force impulse during the key depression but not with the peak force only at the loudest tone. This suggests that rapid reductions of force following the key depression plays a role in considerably fast performance of repetitive piano keystrokes.

The OCO-3 Mission: Science Objectives and Instrument Performance

NASA Astrophysics Data System (ADS)

Eldering, A.; Basilio, R. R.; Bennett, M. W.

2017-12-01

The Orbiting Carbon Observatory 3 (OCO-3) will continue global CO2 and solar-induced chlorophyll fluorescence (SIF) using the flight spare instrument from OCO-2. The instrument is currently being tested, and will be packaged for installation on the International Space Station (ISS) (launch readiness in early 2018.) This talk will focus on the science objectives, updated simulations of the science data products, and the outcome of recent instrument performance tests. The low-inclination ISS orbit lets OCO-3 sample the tropics and sub-tropics across the full range of daylight hours with dense observations at northern and southern mid-latitudes (+/- 52º). The combination of these dense CO2 and SIF measurements provides continuity of data for global flux estimates as well as a unique opportunity to address key deficiencies in our understanding of the global carbon cycle. The instrument utilizes an agile, 2-axis pointing mechanism (PMA), providing the capability to look towards the bright reflection from the ocean and validation targets. The PMA also allows for a snapshot mapping mode to collect dense datasets over 100km by 100km areas. Measurements over urban centers could aid in making estimates of fossil fuel CO2 emissions. Similarly, the snapshot mapping mode can be used to sample regions of interest for the terrestrial carbon cycle. In addition, there is potential to utilize data from ISS instruments ECOSTRESS (ECOsystem Spaceborne Thermal Radiometer Experiment on Space Station) and GEDI (Global Ecosystem Dynamics Investigation), which measure other key variables of the control of carbon uptake by plants, to complement OCO-3 data in science analysis. In 2017, the OCO-2 instrument was transformed into the ISS-ready OCO-3 payload. The transformed instrument was thoroughly tested and characterized. Key characteristics, such as instrument ILS, spectral resolution, and radiometric performance will be described. Analysis of direct sun measurements taken during testing will also be discussed.

[Traditional Chinese Medicine data management policy in big data environment].

PubMed

Liang, Yang; Ding, Chang-Song; Huang, Xin-di; Deng, Le

2018-02-01

As traditional data management model cannot effectively manage the massive data in traditional Chinese medicine(TCM) due to the uncertainty of data object attributes as well as the diversity and abstraction of data representation, a management strategy for TCM data based on big data technology is proposed. Based on true characteristics of TCM data, this strategy could solve the problems of the uncertainty of data object attributes in TCM information and the non-uniformity of the data representation by using modeless properties of stored objects in big data technology. Hybrid indexing mode was also used to solve the conflicts brought by different storage modes in indexing process, with powerful capabilities in query processing of massive data through efficient parallel MapReduce process. The theoretical analysis provided the management framework and its key technology, while its performance was tested on Hadoop by using several common traditional Chinese medicines and prescriptions from practical TCM data source. Result showed that this strategy can effectively solve the storage problem of TCM information, with good performance in query efficiency, completeness and robustness. Copyright© by the Chinese Pharmaceutical Association.

Speciation and Attenuation of Arsenic and Selenium at Coal Combustion By-Product Management Facilities

DOE Office of Scientific and Technical Information (OSTI.GOV)

K. Ladwig

2005-12-31

The overall objective of this project was to evaluate the impact of key constituents captured from power plant air streams (principally arsenic and selenium) on the disposal and utilization of coal combustion products (CCPs). Specific objectives of the project were: (1) to develop a comprehensive database of field leachate concentrations at a wide range of CCP management sites, including speciation of arsenic and selenium, and low-detection limit analyses for mercury; (2) to perform detailed evaluations of the release and attenuation of arsenic species at three CCP sites; and (3) to perform detailed evaluations of the release and attenuation of seleniummore » species at three CCP sites. Each of these objectives was accomplished using a combination of field sampling and laboratory analysis and experimentation. All of the methods used and results obtained are contained in this report. For ease of use, the report is subdivided into three parts. Volume 1 contains methods and results for the field leachate characterization. Volume 2 contains methods and results for arsenic adsorption. Volume 3 contains methods and results for selenium adsorption.« less

Measuring Integration of Cancer Services to Support Performance Improvement: The CSI Survey

PubMed Central

Dobrow, Mark J.; Paszat, Lawrence; Golden, Brian; Brown, Adalsteinn D.; Holowaty, Eric; Orchard, Margo C.; Monga, Neerav; Sullivan, Terrence

2009-01-01

Objective: To develop a measure of cancer services integration (CSI) that can inform clinical and administrative decision-makers in their efforts to monitor and improve cancer system performance. Methods: We employed a systematic approach to measurement development, including review of existing cancer/health services integration measures, key-informant interviews and focus groups with cancer system leaders. The research team constructed a Web-based survey that was field- and pilot-tested, refined and then formally conducted on a sample of cancer care providers and administrators in Ontario, Canada. We then conducted exploratory factor analysis to identify key dimensions of CSI. Results: A total of 1,769 physicians, other clinicians and administrators participated in the survey, responding to a 67-item questionnaire. The exploratory factor analysis identified 12 factors that were linked to three broader dimensions: clinical, functional and vertical system integration. Conclusions: The CSI Survey provides important insights on a range of typically unmeasured aspects of the coordination and integration of cancer services, representing a new tool to inform performance improvement efforts. PMID:20676250

The effect of leadership, organizational culture, and competency on teachers' performance in Ibu Kartini vocational high school Semarang

NASA Astrophysics Data System (ADS)

Toha, Mohamad; Katoningsih, Sri

2018-03-01

The low performance of teachers in organization is influenced many factors. Organizational culture could be the key of organization success; hence many researches were done to identify the value and the attitude norm that gave big contribution for organization success. Competency is a part of employee they perform during work as kind of behavior. Competency depends on the aspects process of teachers' performance. The purpose of this research is to know the effect of leadership, organizational culture and competency on teachers' performance. The objects of this research are leadership, organizational culture, competency and teachers' performance in Ibu Kartini vocational high school. This research is quantitative. To collect the data, questionnaire was used. Then, the data were analyzed by using Path analysis in SPPS 16. The result of this research showed that leadership, organizational culture, competency and performance run well and had significant effect on teachers' performance.

A biological hierarchical model based underwater moving object detection.

PubMed

Shen, Jie; Fan, Tanghuai; Tang, Min; Zhang, Qian; Sun, Zhen; Huang, Fengchen

2014-01-01

Underwater moving object detection is the key for many underwater computer vision tasks, such as object recognizing, locating, and tracking. Considering the super ability in visual sensing of the underwater habitats, the visual mechanism of aquatic animals is generally regarded as the cue for establishing bionic models which are more adaptive to the underwater environments. However, the low accuracy rate and the absence of the prior knowledge learning limit their adaptation in underwater applications. Aiming to solve the problems originated from the inhomogeneous lumination and the unstable background, the mechanism of the visual information sensing and processing pattern from the eye of frogs are imitated to produce a hierarchical background model for detecting underwater objects. Firstly, the image is segmented into several subblocks. The intensity information is extracted for establishing background model which could roughly identify the object and the background regions. The texture feature of each pixel in the rough object region is further analyzed to generate the object contour precisely. Experimental results demonstrate that the proposed method gives a better performance. Compared to the traditional Gaussian background model, the completeness of the object detection is 97.92% with only 0.94% of the background region that is included in the detection results.

A Biological Hierarchical Model Based Underwater Moving Object Detection

PubMed Central

Shen, Jie; Fan, Tanghuai; Tang, Min; Zhang, Qian; Sun, Zhen; Huang, Fengchen

2014-01-01

Underwater moving object detection is the key for many underwater computer vision tasks, such as object recognizing, locating, and tracking. Considering the super ability in visual sensing of the underwater habitats, the visual mechanism of aquatic animals is generally regarded as the cue for establishing bionic models which are more adaptive to the underwater environments. However, the low accuracy rate and the absence of the prior knowledge learning limit their adaptation in underwater applications. Aiming to solve the problems originated from the inhomogeneous lumination and the unstable background, the mechanism of the visual information sensing and processing pattern from the eye of frogs are imitated to produce a hierarchical background model for detecting underwater objects. Firstly, the image is segmented into several subblocks. The intensity information is extracted for establishing background model which could roughly identify the object and the background regions. The texture feature of each pixel in the rough object region is further analyzed to generate the object contour precisely. Experimental results demonstrate that the proposed method gives a better performance. Compared to the traditional Gaussian background model, the completeness of the object detection is 97.92% with only 0.94% of the background region that is included in the detection results. PMID:25140194

Function follows form: combining nanoimprint and inkjet printing

NASA Astrophysics Data System (ADS)

Muehlberger, M.; Haslinger, M. J.; Kurzmann, J.; Ikeda, M.; Fuchsbauer, A.; Faury, T.; Koepplmayr, T.; Ausserhuber, H.; Kastner, J.; Woegerer, C.; Fechtig, D.

2017-06-01

We are investigating the possibilities and the technical requirements to do nanopatterning on arbitrary curved surfaces. This is done considering the opportunities and possibilities of additive manufacturing. One of the key elements is the necessity to deposit material in well-defined areas of various complex 3D objects. In order to achieve this we are developing a robot-based inkjet printing. We report on our progress with this respect and also on our efforts to perform nanoimprinting on curved, possibly 3D-printed objects using materials that can be deposited by inkjet printing. In the framework of this article, we provide an overview over our current status, the challenges and an outlook.

Financial arrangement selection for energy management projects

NASA Astrophysics Data System (ADS)

Woodroof, Eric Aubrey

Scope and method of study. The purpose of this study was to develop a model (E-FUND) to help facility managers select financial arrangements for energy management projects (EMPs). The model was developed with the help of a panel of expert financiers. The panel also helped develop a list of key objectives critical to the decision process. The E-FUND model was tested by a population of facility managers in four case studies. Findings and conclusions. The results may indicate that having a high economic benefit (from an EMP) is not overwhelmingly important, when compared to other qualitative objectives. The results may also indicate that the true lease and performance contract may be the most applicable financial arrangements for EMPs.

Infants' Use of Category Knowledge and Object Attributes when Segregating Objects at 8.5 Months of Age

ERIC Educational Resources Information Center

Needham, Amy; Cantlon, Jessica F.; Ormsbee Holley, Susan M.

2006-01-01

The current research investigates infants' perception of a novel object from a category that is familiar to young infants: key rings. We ask whether experiences obtained outside the lab would allow young infants to parse the visible portions of a partly occluded key ring display into one single unit, presumably as a result of having categorized it…

Bioassays with caged hyalella azteca to determine in situ toxicity downstream of two Saskatchewan, Canada, uranium operations.

PubMed

Robertson, Erin L; Liber, Karsten

2007-11-01

The main objectives of this in situ study were to evaluate the usefulness of an in situ bioassay to determine if downstream water bodies at the Key Lake and Rabbit Lake uranium operations (Saskatchewan, Canada) were toxic to Hyalella azteca and, if toxicity was observed, to differentiate between the contribution of surface water and sediment contamination to in situ toxicity. These objectives were achieved by performing 4-d in situ bioassays with laboratory-reared H. azteca confined in specially designed, paired, surface water and sediment exposure chambers. Results from the in situ bioassays revealed significant mortality, relative to the respective reference site, at the exposure sites at both Key Lake (p

A review of automatic mass detection and segmentation in mammographic images.

PubMed

Oliver, Arnau; Freixenet, Jordi; Martí, Joan; Pérez, Elsa; Pont, Josep; Denton, Erika R E; Zwiggelaar, Reyer

2010-04-01

The aim of this paper is to review existing approaches to the automatic detection and segmentation of masses in mammographic images, highlighting the key-points and main differences between the used strategies. The key objective is to point out the advantages and disadvantages of the various approaches. In contrast with other reviews which only describe and compare different approaches qualitatively, this review also provides a quantitative comparison. The performance of seven mass detection methods is compared using two different mammographic databases: a public digitised database and a local full-field digital database. The results are given in terms of Receiver Operating Characteristic (ROC) and Free-response Receiver Operating Characteristic (FROC) analysis. Copyright 2009 Elsevier B.V. All rights reserved.

Computer keyboard interaction as an indicator of early Parkinson’s disease

PubMed Central

Giancardo, L.; Sánchez-Ferro, A.; Arroyo-Gallego, T.; Butterworth, I.; Mendoza, C. S.; Montero, P.; Matarazzo, M.; Obeso, J. A.; Gray, M. L.; Estépar, R. San José

2016-01-01

Parkinson’s disease (PD) is a slowly progressing neurodegenerative disease with early manifestation of motor signs. Objective measurements of motor signs are of vital importance for diagnosing, monitoring and developing disease modifying therapies, particularly for the early stages of the disease when putative neuroprotective treatments could stop neurodegeneration. Current medical practice has limited tools to routinely monitor PD motor signs with enough frequency and without undue burden for patients and the healthcare system. In this paper, we present data indicating that the routine interaction with computer keyboards can be used to detect motor signs in the early stages of PD. We explore a solution that measures the key hold times (the time required to press and release a key) during the normal use of a computer without any change in hardware and converts it to a PD motor index. This is achieved by the automatic discovery of patterns in the time series of key hold times using an ensemble regression algorithm. This new approach discriminated early PD groups from controls with an AUC = 0.81 (n = 42/43; mean age = 59.0/60.1; women = 43%/60%;PD/controls). The performance was comparable or better than two other quantitative motor performance tests used clinically: alternating finger tapping (AUC = 0.75) and single key tapping (AUC = 0.61). PMID:27703257

Computer keyboard interaction as an indicator of early Parkinson’s disease

NASA Astrophysics Data System (ADS)

Giancardo, L.; Sánchez-Ferro, A.; Arroyo-Gallego, T.; Butterworth, I.; Mendoza, C. S.; Montero, P.; Matarazzo, M.; Obeso, J. A.; Gray, M. L.; Estépar, R. San José

2016-10-01

Parkinson’s disease (PD) is a slowly progressing neurodegenerative disease with early manifestation of motor signs. Objective measurements of motor signs are of vital importance for diagnosing, monitoring and developing disease modifying therapies, particularly for the early stages of the disease when putative neuroprotective treatments could stop neurodegeneration. Current medical practice has limited tools to routinely monitor PD motor signs with enough frequency and without undue burden for patients and the healthcare system. In this paper, we present data indicating that the routine interaction with computer keyboards can be used to detect motor signs in the early stages of PD. We explore a solution that measures the key hold times (the time required to press and release a key) during the normal use of a computer without any change in hardware and converts it to a PD motor index. This is achieved by the automatic discovery of patterns in the time series of key hold times using an ensemble regression algorithm. This new approach discriminated early PD groups from controls with an AUC = 0.81 (n = 42/43 mean age = 59.0/60.1 women = 43%/60%PD/controls). The performance was comparable or better than two other quantitative motor performance tests used clinically: alternating finger tapping (AUC = 0.75) and single key tapping (AUC = 0.61).

Computer keyboard interaction as an indicator of early Parkinson's disease.

PubMed

Giancardo, L; Sánchez-Ferro, A; Arroyo-Gallego, T; Butterworth, I; Mendoza, C S; Montero, P; Matarazzo, M; Obeso, J A; Gray, M L; Estépar, R San José

2016-10-05

Parkinson's disease (PD) is a slowly progressing neurodegenerative disease with early manifestation of motor signs. Objective measurements of motor signs are of vital importance for diagnosing, monitoring and developing disease modifying therapies, particularly for the early stages of the disease when putative neuroprotective treatments could stop neurodegeneration. Current medical practice has limited tools to routinely monitor PD motor signs with enough frequency and without undue burden for patients and the healthcare system. In this paper, we present data indicating that the routine interaction with computer keyboards can be used to detect motor signs in the early stages of PD. We explore a solution that measures the key hold times (the time required to press and release a key) during the normal use of a computer without any change in hardware and converts it to a PD motor index. This is achieved by the automatic discovery of patterns in the time series of key hold times using an ensemble regression algorithm. This new approach discriminated early PD groups from controls with an AUC = 0.81 (n = 42/43; mean age = 59.0/60.1; women = 43%/60%;PD/controls). The performance was comparable or better than two other quantitative motor performance tests used clinically: alternating finger tapping (AUC = 0.75) and single key tapping (AUC = 0.61).

Confronting Decision Cliffs: Diagnostic Assessment of Multi-Objective Evolutionary Algorithms' Performance for Addressing Uncertain Environmental Thresholds

NASA Astrophysics Data System (ADS)

Ward, V. L.; Singh, R.; Reed, P. M.; Keller, K.

2014-12-01

As water resources problems typically involve several stakeholders with conflicting objectives, multi-objective evolutionary algorithms (MOEAs) are now key tools for understanding management tradeoffs. Given the growing complexity of water planning problems, it is important to establish if an algorithm can consistently perform well on a given class of problems. This knowledge allows the decision analyst to focus on eliciting and evaluating appropriate problem formulations. This study proposes a multi-objective adaptation of the classic environmental economics "Lake Problem" as a computationally simple but mathematically challenging MOEA benchmarking problem. The lake problem abstracts a fictional town on a lake which hopes to maximize its economic benefit without degrading the lake's water quality to a eutrophic (polluted) state through excessive phosphorus loading. The problem poses the challenge of maintaining economic activity while confronting the uncertainty of potentially crossing a nonlinear and potentially irreversible pollution threshold beyond which the lake is eutrophic. Objectives for optimization are maximizing economic benefit from lake pollution, maximizing water quality, maximizing the reliability of remaining below the environmental threshold, and minimizing the probability that the town will have to drastically change pollution policies in any given year. The multi-objective formulation incorporates uncertainty with a stochastic phosphorus inflow abstracting non-point source pollution. We performed comprehensive diagnostics using 6 algorithms: Borg, MOEAD, eMOEA, eNSGAII, GDE3, and NSGAII to ascertain their controllability, reliability, efficiency, and effectiveness. The lake problem abstracts elements of many current water resources and climate related management applications where there is the potential for crossing irreversible, nonlinear thresholds. We show that many modern MOEAs can fail on this test problem, indicating its suitability as a useful and nontrivial benchmarking problem.

Portable microfluidic platform for real-time, high sensitive detection and identification of trichloroethylene and other organochloride compounds

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jensen, Erik

In this successful SBIR Phase II effort, HJ Science & Technology, Inc. has designed and built a novel portable instrument capable of performing automated aqueous organochloride (chlorinated solvent) speciation analysis for environmental monitoring at DoE sites. Our technique employs performing organochloride conjugation, labeling the conjugate with an efficient fluorophore, and performing on-chip capillary electrophoresis separation with laser induced fluorescence detection. The key component of the portable instrument is a novel microfluidic chip capable of complete “end-to-end” automation of sample preparation, conjugation, labeling, and μCE separation and detection. In addition, the Phase II prototype includes key supporting instrumentation such as themore » optical module, pneumatic manifold, electronics, software, etc. As such, we have achieved all of the following 4 Phase II technical objectives: 1) Further refine and optimize the “on-chip” automation of the organochloride conjugation and labeling protocol, 2) Further improve the microfluidic chip fabrication process and the pneumatic manifold design in order to address issues related to performance consistency, product yield, performance reliability, and user friendliness, 3) Design and build the supporting components of the Phase II prototype including optical module, electronics, and software, and 4) Assemble the Phase II prototype hardware.« less

The balanced scorecard: sustainable performance assessment for forensic laboratories.

PubMed

Houck, Max; Speaker, Paul J; Fleming, Arron Scott; Riley, Richard A

2012-12-01

The purpose of this article is to introduce the concept of the balanced scorecard into the laboratory management environment. The balanced scorecard is a performance measurement matrix designed to capture financial and non-financial metrics that provide insight into the critical success factors for an organization, effectively aligning organization strategy to key performance objectives. The scorecard helps organizational leaders by providing balance from two perspectives. First, it ensures an appropriate mix of performance metrics from across the organization to achieve operational excellence; thereby the balanced scorecard ensures that no single or limited group of metrics dominates the assessment process, possibly leading to long-term inferior performance. Second, the balanced scorecard helps leaders offset short term performance pressures by giving recognition and weight to long-term laboratory needs that, if not properly addressed, might jeopardize future laboratory performance. Copyright © 2012 Forensic Science Society. Published by Elsevier Ireland Ltd. All rights reserved.

Research pressure instrumentation for NASA Space Shuttle main engine

NASA Technical Reports Server (NTRS)

Anderson, P. J.; Nussbaum, P.; Gustafson, G.

1984-01-01

The development of prototype pressure transducers which are targeted to meet the Space Shuttle Main Engine SSME performance design goals is discussed. The fabrication, testing and delivery of 10 prototype units is examined. Silicon piezoresistive strain sensing technology is used to achieve the objectives of advanced state-of-the-art pressure sensors in terms of reliability, accuracy and ease of manufacture. Integration of multiple functions on a single chip is the key attribute of this technology.

Experimental results for correlation-based wavefront sensing

DOE Office of Scientific and Technical Information (OSTI.GOV)

Poyneer, L A; Palmer, D W; LaFortune, K N

2005-07-01

Correlation wave-front sensing can improve Adaptive Optics (AO) system performance in two keys areas. For point-source-based AO systems, Correlation is more accurate, more robust to changing conditions and provides lower noise than a centroiding algorithm. Experimental results from the Lick AO system and the SSHCL laser AO system confirm this. For remote imaging, Correlation enables the use of extended objects for wave-front sensing. Results from short horizontal-path experiments will show algorithm properties and requirements.

NEEMO - NASA's Extreme Environment Mission Operations: On to a NEO

NASA Technical Reports Server (NTRS)

Bell, M. S.; Baskin, P. J.; Todd, W. L.

2011-01-01

During NEEMO missions, a crew of six Aquanauts lives aboard the National Oceanic and Atmospheric Administration (NOAA) Aquarius Underwater Laboratory the world's only undersea laboratory located 5.6 km off shore from Key Largo, Florida. The Aquarius habitat is anchored 62 feet deep on Conch Reef which is a research only zone for coral reef monitoring in the Florida Keys National Marine Sanctuary. The crew lives in saturation for a week to ten days and conducts a variety of undersea EVAs (Extra Vehicular Activities) to test a suite of long-duration spaceflight Engineering, Biomedical, and Geoscience objectives. The crew also tests concepts for future lunar exploration using advanced navigation and communication equipment in support of the Constellation Program planetary exploration analog studies. The Astromaterials Research and Exploration Science (ARES) Directorate and Behavioral Health and Performance (BHP) at NASA/Johnson Space Center (JSC), Houston, Texas support this effort to produce a high-fidelity test-bed for studies of human planetary exploration in extreme environments as well as to develop and test the synergy between human and robotic curation protocols including sample collection, documentation, and sample handling. The geoscience objectives for NEEMO missions reflect the requirements for Lunar Surface Science outlined by the LEAG (Lunar Exploration Analysis Group) and CAPTEM (Curation and Analysis Planning Team for Extraterrestrial Materials) white paper [1]. The BHP objectives are to investigate best meas-ures and tools for assessing decrements in cogni-tive function due to fatigue, test the feasibility study examined how teams perform and interact across two levels, use NEEMO as a testbed for the development, deployment, and evaluation of a scheduling and planning tool. A suite of Space Life Sciences studies are accomplished as well, ranging from behavioral health and performance to immunology, nutrition, and EVA suit design results of which will directly support the investigation of open questions and operational concepts that will enable NASA to continue its plan for planetary exploration.

Argus+: The Future of Wide-Field, Spectral-Line Imaging at 3-mm with the Green Bank Telescope

NASA Astrophysics Data System (ADS)

Maddalena, Ronald; Frayer, David; Lockman, Felix; O'Neil, Karen; White, Steven; Argus+ Collaboration

2018-01-01

The Robert C Byrd Green Bank Telescope has met its design goal of providing high-quality observations at 115 GHz. Observers also have access to the new, 16-pixel, 3-mm Argus receiver, which is providing high-dynamic range images over wide fields for the multitude of spectral lines between 85 and 115 GHz, including CO, 13CO, C18O, SiO, HCN, HCO+, HNC, N2H+, and CS. The small number of pixels in Argus limits its ability to map many of the most interesting objects whose extent exceeds many arc-minutes. The successful performance of Argus, and its modular design, demonstrates that receivers with many more pixels could be built for the GBT. A 12 x 12 array of the Argus design would have mapping speeds about nine times faster than Argus without suffering any degradation in performance for the outer pixels in the array. We present our plans to build the next-generation Argus instrument (Argus+) with 144-pixels, a footprint 5’x5’, and 7" resolution at 110 GHz. The project will be a collaboration between the Green Bank Observatory and university groups, who will supply key components. The key science drivers for Argus+ are studies of molecular filaments in the Milky Way, studies of molecular clouds in nearby galaxies, and the observations of rapidly evolving solar system objects.

Assessment of systems for paying health care providers in Vietnam: implications for equity, efficiency and expanding effective health coverage.

PubMed

Phuong, Nguyen Khanh; Oanh, Tran Thi Mai; Phuong, Hoang Thi; Tien, Tran Van; Cashin, Cheryl

2015-01-01

Provider payment arrangements are currently a core concern for Vietnam's health sector and a key lever for expanding effective coverage and improving the efficiency and equity of the health system. This study describes how different provider payment systems are designed and implemented in practice across a sample of provinces and districts in Vietnam. Key informant interviews were conducted with over 100 health policy-makers, purchasers and providers using a structured interview guide. The results of the different payment methods were scored by respondents and assessed against a set of health system performance criteria. Overall, the public health insurance agency, Vietnam Social Security (VSS), is focused on managing expenditures through a complicated set of reimbursement policies and caps, but the incentives for providers are unclear and do not consistently support Vietnam's health system objectives. The results of this study are being used by the Ministry of Health and VSS to reform the provider payment systems to be more consistent with international definitions and good practices and to better support Vietnam's health system objectives.

[The configuration of nursing labor conditions in the Buenos Aires Metropolitan Area: An analysis at the intersection of the gender order and the organization of the health system].

PubMed

Pereyra, Francisca; Micha, Ariela

2016-01-01

The article explores two key factors which contribute to shape the poor working conditions of nursing in Argentina. A first objective focuses on exploring the effect of the occupation's care component, closely associated with cultural images of "inherent" female qualities, on working conditions. A second objective aims to examine the way in which the organization of health services provision in Argentina intensifies the vulnerability of this occupation. Regarding the methodology, the fieldwork conducted in the Metropolitan Area of Buenos Aires included in-depth interviews with key informants and group interviews with nurses. Among the results, on the one hand it is shown how the social devaluation of care is reflected in the discourse of those who perform the occupation as well as in institutional practices and policies in the health sector. On the other hand, it is shown that the decentralization and fragmentation of the health system act as additional obstacles hampering the articulation of labor demands.

Understanding Interdependencies between Heterogeneous Earth Observation Systems When Applied to Federal Objectives

NASA Astrophysics Data System (ADS)

Gallo, J.; Sylak-Glassman, E.

2017-12-01

We will present a method for assessing interdependencies between heterogeneous Earth observation (EO) systems when applied to key Federal objectives. Using data from the National Earth Observation Assessment (EOA), we present a case study that examines the frequency that measurements from each of the Landsat 8 sensors are used in conjunction with heterogeneous measurements from other Earth observation sensors to develop data and information products. This EOA data allows us to map the most frequent interactions between Landsat measurements and measurements from other sensors, identify high-impact data and information products where these interdependencies occur, and identify where these combined measurements contribute most to meeting a key Federal objective within one of the 13 Societal Benefit Areas used in the EOA study. Using a value-tree framework to trace the application of data from EO systems to weighted key Federal objectives within the EOA study, we are able to estimate relative contribution of individual EO systems to meeting those objectives, as well as the interdependencies between measurements from all EO systems within the EOA study. The analysis relies on a modified Delphi method to elicit relative levels of reliance on individual measurements from EO systems, including combinations of measurements, from subject matter experts. This results in the identification of a representative portfolio of all EO systems used to meet key Federal objectives. Understanding the interdependencies among a heterogeneous set of measurements that modify the impact of any one individual measurement on meeting a key Federal objective, especially if the measurements originate from multiple agencies or state/local/tribal, international, academic, and commercial sources, can impact agency decision-making regarding mission requirements and inform understanding of user needs.

Comparative Plasma Exposure of Albendazole after Administration of Rapidly Disintegrating Tablets in Dogs

PubMed Central

Castro, Silvina G.; Dib, Alicia; Suarez, Gonzalo; Allemandi, Daniel; Lanusse, Carlos; Sanchez Bruni, Sergio; Palma, Santiago D.

2013-01-01

The main objectives of this study were (a) to evaluate the in vitro performance of the rapid disintegration tablets as a way to improve the solid dispersions and (b) to study the in vivo pharmacokinetics of the albendazole modified formulation in dogs. Rapid disintegration of tablets seems to be a key factor for efficiency of solid dispersions with regard to improvement of the albendazole bioavailability. The in vivo assays performed on dogs showed a marked increase in drug plasma exposure when albendazole was given in solid dispersions incorporated into rapid disintegration tablets compared with conventional solid dosage form. PMID:24063016

Astrobee: Developing a Free Flying Robot for the International Space Station

NASA Technical Reports Server (NTRS)

Bualat, Maria; Barlow, Jonathan; Fong, Terrence; Provencher, Christopher; Smith, Trey; Zuniga, Allison

2015-01-01

Astronaut time will always be in short supply, consumables (e.g., oxygen) will always be limited, and some work will not be feasible, or productive, for astronauts to do manually. Free flyers offer significant potential to perform a great variety of tasks, include routine, repetitive or simple but long-duration work, such as conducting environment surveys, taking sensor readings or monitoring crew activities. The "Astrobee" project is developing a new free flying robot system suitable for performing Intravehicular Activity (IVA) work on the International Space Station (ISS). This paper will describe the Astrobee project objectives, initial design, concept of operations, and key challenges.

Humans on the International Space Station-How Research, Operations, and International Collaboration are Leading to New Understanding of Human Physiology and Performance in Microgravity

NASA Technical Reports Server (NTRS)

Ronbinson, Julie A.; Harm, Deborah L.

2009-01-01

As the International Space Station (ISS) nears completion, and full international utilization is achieved, we are at a scientific crossroads. ISS is the premier location for research aimed at understanding the effects of microgravity on the human body. For applications to future human exploration, it is key for validation, quantification, and mitigation of a wide variety of spaceflight risks to health and human performance. Understanding and mitigating these risks is the focus of NASA s Human Research Program. However, NASA s approach to defining human research objectives is only one of many approaches within the ISS international partnership (including Roscosmos, the European Space Agency, the Canadian Space Agency, and the Japan Aerospace Exploration Agency). Each of these agencies selects and implements their own ISS research, with independent but related objectives for human and life sciences research. Because the science itself is also international and collaborative, investigations that are led by one ISS partner also often include cooperative scientists from around the world. The operation of the ISS generates significant additional data that is not directly linked to specific investigations. Such data comes from medical monitoring of crew members, life support and radiation monitoring, and from the systems that have been implemented to protect the health of the crew (such as exercise hardware). We provide examples of these international synergies in human research on ISS and highlight key early accomplishments that derive from these broad interfaces. Taken as a whole, the combination of diverse research objectives, operational data, international sharing of research resources on ISS, and scientific collaboration provide a robust research approach and capability that no one partner could achieve alone.

Robust Feedback Zoom Tracking for Digital Video Surveillance

PubMed Central

Zou, Tengyue; Tang, Xiaoqi; Song, Bao; Wang, Jin; Chen, Jihong

2012-01-01

Zoom tracking is an important function in video surveillance, particularly in traffic management and security monitoring. It involves keeping an object of interest in focus during the zoom operation. Zoom tracking is typically achieved by moving the zoom and focus motors in lenses following the so-called “trace curve”, which shows the in-focus motor positions versus the zoom motor positions for a specific object distance. The main task of a zoom tracking approach is to accurately estimate the trace curve for the specified object. Because a proportional integral derivative (PID) controller has historically been considered to be the best controller in the absence of knowledge of the underlying process and its high-quality performance in motor control, in this paper, we propose a novel feedback zoom tracking (FZT) approach based on the geometric trace curve estimation and PID feedback controller. The performance of this approach is compared with existing zoom tracking methods in digital video surveillance. The real-time implementation results obtained on an actual digital video platform indicate that the developed FZT approach not only solves the traditional one-to-many mapping problem without pre-training but also improves the robustness for tracking moving or switching objects which is the key challenge in video surveillance. PMID:22969388

Gender and Physics: A Theoretical Analysis.

ERIC Educational Resources Information Center

Rolin, Kristina

2001-01-01

Argues that objections raised by Koertge, Gross and Levitt, and Weinberg against feminist scholarship are unwarranted. The concept of gender, as it has been developed in feminist theory, is key to understanding why the first objection is misguided. Social analysis of scientific knowledge is key to understanding why the second and third objections…

Object Persistence Enhances Spatial Navigation: A Case Study in Smartphone Vision Science.

PubMed

Liverence, Brandon M; Scholl, Brian J

2015-07-01

Violations of spatiotemporal continuity disrupt performance in many tasks involving attention and working memory, but experiments on this topic have been limited to the study of moment-by-moment on-line perception, typically assessed by passive monitoring tasks. We tested whether persisting object representations also serve as underlying units of longer-term memory and active spatial navigation, using a novel paradigm inspired by the visual interfaces common to many smartphones. Participants used key presses to navigate through simple visual environments consisting of grids of icons (depicting real-world objects), only one of which was visible at a time through a static virtual window. Participants found target icons faster when navigation involved persistence cues (via sliding animations) than when persistence was disrupted (e.g., via temporally matched fading animations), with all transitions inspired by smartphone interfaces. Moreover, this difference occurred even after explicit memorization of the relevant information, which demonstrates that object persistence enhances spatial navigation in an automatic and irresistible fashion. © The Author(s) 2015.

Alignment effects in beer mugs: Automatic action activation or response competition?

PubMed

Roest, Sander A; Pecher, Diane; Naeije, Lilian; Zeelenberg, René

2016-08-01

Responses to objects with a graspable handle are faster when the response hand and handle orientation are aligned (e.g., a key press with the right hand is required and the object handle is oriented to the right) than when they are not aligned. This effect could be explained by automatic activation of specific motor programs when an object is viewed. Alternatively, the effect could be explained by competition at the response level. Participants performed a reach-and-grasp or reach-and-button-press action with their left or right hand in response to the color of a beer mug. The alignment effect did not vary as a function of the type of action. In addition, the alignment effect disappeared in a go/no-go version of the task. The same results were obtained when participants made upright/inverted decisions, so that object shape was task-relevant. Our results indicate that alignment effects are not due to automatic motor activation of the left or right limb.

Cheese mites and other delicacies: the introduction of test objects into microscopy.

PubMed

Schickore, Jutta

2003-01-01

In the 1820s, certain minute objects began to be used regularly as tests for microscopes. Scales of insects, animal hairs and tiny leaves served as convenient means to assess their optical performance. It was a peculiar conjunction of optics, astronomy and natural history that formed the intellectual background for the emergence of the tests; and their establishment was greatly facilitated by the culture of conversation and competition in which microscopical practice was embedded. The introduction of the tests soon gave rise to a peculiar and highly productive interaction: the application of test objects incited instrument makers to aspire after technical improvements. These pursuits led, in turn, to a differentiation and refinement of the tests themselves, which then again suggested specific kinds of improvements. Historians have paid only scant attention to these issues. But the early history of test objects deserves thorough investigation. In fact, it provides a key to the understanding of the intellectual and social contexts and the dynamics of microscopy in early 19th-century Britain.

Multi-objective optimization of an industrial penicillin V bioreactor train using non-dominated sorting genetic algorithm.

PubMed

Lee, Fook Choon; Rangaiah, Gade Pandu; Ray, Ajay Kumar

2007-10-15

Bulk of the penicillin produced is used as raw material for semi-synthetic penicillin (such as amoxicillin and ampicillin) and semi-synthetic cephalosporins (such as cephalexin and cefadroxil). In the present paper, an industrial penicillin V bioreactor train is optimized for multiple objectives simultaneously. An industrial train, comprising a bank of identical bioreactors, is run semi-continuously in a synchronous fashion. The fermentation taking place in a bioreactor is modeled using a morphologically structured mechanism. For multi-objective optimization for two and three objectives, the elitist non-dominated sorting genetic algorithm (NSGA-II) is chosen. Instead of a single optimum as in the traditional optimization, a wide range of optimal design and operating conditions depicting trade-offs of key performance indicators such as batch cycle time, yield, profit and penicillin concentration, is successfully obtained. The effects of design and operating variables on the optimal solutions are discussed in detail. Copyright 2007 Wiley Periodicals, Inc.

Adaptive particle filter for robust visual tracking

NASA Astrophysics Data System (ADS)

Dai, Jianghua; Yu, Shengsheng; Sun, Weiping; Chen, Xiaoping; Xiang, Jinhai

2009-10-01

Object tracking plays a key role in the field of computer vision. Particle filter has been widely used for visual tracking under nonlinear and/or non-Gaussian circumstances. In particle filter, the state transition model for predicting the next location of tracked object assumes the object motion is invariable, which cannot well approximate the varying dynamics of the motion changes. In addition, the state estimate calculated by the mean of all the weighted particles is coarse or inaccurate due to various noise disturbances. Both these two factors may degrade tracking performance greatly. In this work, an adaptive particle filter (APF) with a velocity-updating based transition model (VTM) and an adaptive state estimate approach (ASEA) is proposed to improve object tracking. In APF, the motion velocity embedded into the state transition model is updated continuously by a recursive equation, and the state estimate is obtained adaptively according to the state posterior distribution. The experiment results show that the APF can increase the tracking accuracy and efficiency in complex environments.

Determinants and effects of medical students’ core self-evaluation tendencies on clinical competence and workplace well-being in clerkship

PubMed Central

Lin, Yung Kai

2017-01-01

Core self-evaluation (CSE) is a personality trait that involves a person’s evaluation of his or her own worth, competence, and capability. The objective of this study was to determine whether medical students’ CSEs exert beneficial effects on their adaptation to their clerkship in terms of their clinical competence and workplace well-being and whether their preclinical academic performance can be a trait-relevant situation that enhances their CSE expression. In total, 127 medical students from 2 cohorts were included as participants in this study. We analyzed complete measures of personal background, objective and subjective preclinical academic performance (course evaluation grades and self-reported efficacy), CSE tendencies, and clinical competence (as objective structured clinical examination scores) and workplace well-being (as compassion satisfaction and burnout) during their 2-year clerkship. Mixed linear models for repeated measures and multiple regressions were employed. Participants’ CSE tendencies had positive effects on their workplace compassion satisfaction and burnout but not on their clinical competence during their clerkship. Additionally, using the objective and subjective preclinical academic performance of the medical students as indicators, we observed that neither could be trait-relevant situations to enhance their CSE expression. CSE personality tendencies might be key to medical students’ ability to noncognitively adapt to clinical training during their clerkships. These tendencies should be identified earlier so that mentors can provide prompt care and support to mentees (medical students) during clerkships. PMID:29186158

Determinants and effects of medical students' core self-evaluation tendencies on clinical competence and workplace well-being in clerkship.

PubMed

Lin, Yung Kai; Chen, Der-Yuan; Lin, Blossom Yen-Ju

2017-01-01

Core self-evaluation (CSE) is a personality trait that involves a person's evaluation of his or her own worth, competence, and capability. The objective of this study was to determine whether medical students' CSEs exert beneficial effects on their adaptation to their clerkship in terms of their clinical competence and workplace well-being and whether their preclinical academic performance can be a trait-relevant situation that enhances their CSE expression. In total, 127 medical students from 2 cohorts were included as participants in this study. We analyzed complete measures of personal background, objective and subjective preclinical academic performance (course evaluation grades and self-reported efficacy), CSE tendencies, and clinical competence (as objective structured clinical examination scores) and workplace well-being (as compassion satisfaction and burnout) during their 2-year clerkship. Mixed linear models for repeated measures and multiple regressions were employed. Participants' CSE tendencies had positive effects on their workplace compassion satisfaction and burnout but not on their clinical competence during their clerkship. Additionally, using the objective and subjective preclinical academic performance of the medical students as indicators, we observed that neither could be trait-relevant situations to enhance their CSE expression. CSE personality tendencies might be key to medical students' ability to noncognitively adapt to clinical training during their clerkships. These tendencies should be identified earlier so that mentors can provide prompt care and support to mentees (medical students) during clerkships.

Variables associated with work performance in multidisciplinary mental health teams

PubMed Central

Fleury, Marie-Josée; Grenier, Guy; Bamvita, Jean-Marie; Chiocchio, François

2017-01-01

Objectives: This study investigates work performance among 79 mental health teams in Quebec (Canada). We hypothesized that work performance was positively associated with the use of standardized clinical tools and clinical approaches, integration strategies, “clan culture,” and mental health funding per capita. Methods: Work performance was measured using an adapted version of the Work Role Questionnaire. Variables were organized into four key areas: (1) team attributes, (2) organizational culture, (3) inter-organizational interactions, and (4) external environment. Results: Work performance was associated with two types of organizational culture (clan and hierarchy) and with two team attributes (use of standardized clinical tools and approaches). Discussion and conclusion: This study was innovative in identifying associations between work performance and best practices, justifying their implementation. Recommendations are provided to develop organizational cultures promoting a greater focus on the external environment and integration strategies that strengthen external focus, service effectiveness, and innovation. PMID:28839935

Informatics in radiology: use of CouchDB for document-based storage of DICOM objects.

PubMed

Rascovsky, Simón J; Delgado, Jorge A; Sanz, Alexander; Calvo, Víctor D; Castrillón, Gabriel

2012-01-01

Picture archiving and communication systems traditionally have depended on schema-based Structured Query Language (SQL) databases for imaging data management. To optimize database size and performance, many such systems store a reduced set of Digital Imaging and Communications in Medicine (DICOM) metadata, discarding informational content that might be needed in the future. As an alternative to traditional database systems, document-based key-value stores recently have gained popularity. These systems store documents containing key-value pairs that facilitate data searches without predefined schemas. Document-based key-value stores are especially suited to archive DICOM objects because DICOM metadata are highly heterogeneous collections of tag-value pairs conveying specific information about imaging modalities, acquisition protocols, and vendor-supported postprocessing options. The authors used an open-source document-based database management system (Apache CouchDB) to create and test two such databases; CouchDB was selected for its overall ease of use, capability for managing attachments, and reliance on HTTP and Representational State Transfer standards for accessing and retrieving data. A large database was created first in which the DICOM metadata from 5880 anonymized magnetic resonance imaging studies (1,949,753 images) were loaded by using a Ruby script. To provide the usual DICOM query functionality, several predefined "views" (standard queries) were created by using JavaScript. For performance comparison, the same queries were executed in both the CouchDB database and a SQL-based DICOM archive. The capabilities of CouchDB for attachment management and database replication were separately assessed in tests of a similar, smaller database. Results showed that CouchDB allowed efficient storage and interrogation of all DICOM objects; with the use of information retrieval algorithms such as map-reduce, all the DICOM metadata stored in the large database were searchable with only a minimal increase in retrieval time over that with the traditional database management system. Results also indicated possible uses for document-based databases in data mining applications such as dose monitoring, quality assurance, and protocol optimization. RSNA, 2012

An optimized content-aware image retargeting method: toward expanding the perceived visual field of the high-density retinal prosthesis recipients

NASA Astrophysics Data System (ADS)

Li, Heng; Zeng, Yajie; Lu, Zhuofan; Cao, Xiaofei; Su, Xiaofan; Sui, Xiaohong; Wang, Jing; Chai, Xinyu

2018-04-01

Objective. Retinal prosthesis devices have shown great value in restoring some sight for individuals with profoundly impaired vision, but the visual acuity and visual field provided by prostheses greatly limit recipients’ visual experience. In this paper, we employ computer vision approaches to seek to expand the perceptible visual field in patients implanted potentially with a high-density retinal prosthesis while maintaining visual acuity as much as possible. Approach. We propose an optimized content-aware image retargeting method, by introducing salient object detection based on color and intensity-difference contrast, aiming to remap important information of a scene into a small visual field and preserve their original scale as much as possible. It may improve prosthetic recipients’ perceived visual field and aid in performing some visual tasks (e.g. object detection and object recognition). To verify our method, psychophysical experiments, detecting object number and recognizing objects, are conducted under simulated prosthetic vision. As control, we use three other image retargeting techniques, including Cropping, Scaling, and seam-assisted shrinkability. Main results. Results show that our method outperforms in preserving more key features and has significantly higher recognition accuracy in comparison with other three image retargeting methods under the condition of small visual field and low-resolution. Significance. The proposed method is beneficial to expand the perceived visual field of prosthesis recipients and improve their object detection and recognition performance. It suggests that our method may provide an effective option for image processing module in future high-density retinal implants.

The Close-Up Imager Onboard the ESA ExoMars Rover: Objectives, Description, Operations, and Science Validation Activities.

PubMed

Josset, Jean-Luc; Westall, Frances; Hofmann, Beda A; Spray, John; Cockell, Charles; Kempe, Stephan; Griffiths, Andrew D; De Sanctis, Maria Cristina; Colangeli, Luigi; Koschny, Detlef; Föllmi, Karl; Verrecchia, Eric; Diamond, Larryn; Josset, Marie; Javaux, Emmanuelle J; Esposito, Francesca; Gunn, Matthew; Souchon-Leitner, Audrey L; Bontognali, Tomaso R R; Korablev, Oleg; Erkman, Suren; Paar, Gerhard; Ulamec, Stephan; Foucher, Frédéric; Martin, Philippe; Verhaeghe, Antoine; Tanevski, Mitko; Vago, Jorge L

The Close-Up Imager (CLUPI) onboard the ESA ExoMars Rover is a powerful high-resolution color camera specifically designed for close-up observations. Its accommodation on the movable drill allows multiple positioning. The science objectives of the instrument are geological characterization of rocks in terms of texture, structure, and color and the search for potential morphological biosignatures. We present the CLUPI science objectives, performance, and technical description, followed by a description of the instrument's planned operations strategy during the mission on Mars. CLUPI will contribute to the rover mission by surveying the geological environment, acquiring close-up images of outcrops, observing the drilling area, inspecting the top portion of the drill borehole (and deposited fines), monitoring drilling operations, and imaging samples collected by the drill. A status of the current development and planned science validation activities is also given. Key Words: Mars-Biosignatures-Planetary Instrumentation. Astrobiology 17, 595-611.

An intelligent robot for helping astronauts

NASA Technical Reports Server (NTRS)

Erickson, J. D.; Grimm, K. A.; Pendleton, T. W.

1994-01-01

This paper describes the development status of a prototype supervised intelligent robot for space application for purposes of (1) helping the crew of a spacecraft such as the Space Station with various tasks, such as holding objects and retrieving/replacing tools and other objects from/into storage, and (2) for purposes of retrieving detached objects, such as equipment or crew, that have become separated from their spacecraft. In addition to this set of tasks in this low-Earth-orbiting spacecraft environment, it is argued that certain aspects of the technology can be viewed as generic in approach, thereby offering insight into intelligent robots for other tasks and environments. Candidate software architectures and their key technical issues which enable real work in real environments to be accomplished safely and robustly are addressed. Results of computer simulations of grasping floating objects are presented. Also described are characterization results on the usable reduced gravity environment in an aircraft flying parabola (to simulate weightlessness) and results on hardware performance there. These results show it is feasible to use that environment for evaluative testing of dexterous grasping based on real-time vision of freely rotating and translating objects.

Robust Pedestrian Tracking and Recognition from FLIR Video: A Unified Approach via Sparse Coding

PubMed Central

Li, Xin; Guo, Rui; Chen, Chao

2014-01-01

Sparse coding is an emerging method that has been successfully applied to both robust object tracking and recognition in the vision literature. In this paper, we propose to explore a sparse coding-based approach toward joint object tracking-and-recognition and explore its potential in the analysis of forward-looking infrared (FLIR) video to support nighttime machine vision systems. A key technical contribution of this work is to unify existing sparse coding-based approaches toward tracking and recognition under the same framework, so that they can benefit from each other in a closed-loop. On the one hand, tracking the same object through temporal frames allows us to achieve improved recognition performance through dynamical updating of template/dictionary and combining multiple recognition results; on the other hand, the recognition of individual objects facilitates the tracking of multiple objects (i.e., walking pedestrians), especially in the presence of occlusion within a crowded environment. We report experimental results on both the CASIAPedestrian Database and our own collected FLIR video database to demonstrate the effectiveness of the proposed joint tracking-and-recognition approach. PMID:24961216

Civilian Manpower Cost Controls Automated Data System: Functional Description,

DTIC Science & Technology

1984-12-07

1.2 Project References 1-1 1.3 Terms and Abbreviations 1-3 2 SYSTEM SUMMARY 2-1 2.1 Background 2-1 2.2 Objective 2-2 2.3 Existing Methods and...Procedures 2-3 2.4 Proposed Methods and Procedures 2-18 2.5 Assumptions and Constraints 2-33 3 DETAILED CHARACTERISTICS 3-1 3.1 Specific Performance...of the most critical of Army resources and a key partner is the civilian work force. Maintanance of the large professional civilian work force

Sentinel 4: a geostationary imaging UVN spectrometer for air quality monitoring: status of design, performance and development

NASA Astrophysics Data System (ADS)

Gulde, S. T.; Kolm, M. G.; Smith, D. J.; Maurer, R.; Bazalgette Courrèges-Lacoste, G.; Sallusti, M.; Bagnasco, G.

2017-11-01

SENTINEL 4 is an imaging UVN (UV-VIS-NIR) spectrometer, developed by Airbus Defence and Space under ESA contract in the frame of the joint European Union (EU)/ESA COPERNICUS program. The mission objective is the operational monitoring of trace gas concentrations for atmospheric chemistry and climate applications. To this end SENTINEL 4 will provide accurate measurements of key atmospheric constituents such as ozone, nitrogen dioxide, sulfur dioxide, formaldehyde, as well as aerosol and cloud properties.

Determining your organization's 'risk capability'.

PubMed

Hannah, Bill; Hancock, Melinda

2014-05-01

An assessment of a provider's level of risk capability should focus on three key elements: Business intelligence, including sophisticated analytical models that can offer insight into the expected cost and quality of care for a given population. Clinical enterprise maturity, marked by the ability to improve health outcomes and to manage utilization and costs to drive change. Revenue transformation, emphasizing the need for a revenue cycle platform that allows for risk acceptance and management and that provides incentives for performance against defined objectives.

The flight of a balsa glider

NASA Astrophysics Data System (ADS)

Waltham, Chris

1999-07-01

A simple analysis is performed on the flight of a small balsa toy glider. All the basic features of flight have to be included in the calculation. Key differences between the flight of small objects like the glider, and full-sized aircraft, are examined. Good agreement with experimental data is obtained when only one parameter, the drag coefficient, is allowed to vary. The experimental drag coefficient is found to be within a factor of 2 of that obtained using the theory of ideal flat plates.

Tomographic wavefront retrieval by combined use of geometric and plenoptic sensors

NASA Astrophysics Data System (ADS)

Trujillo-Sevilla, J. M.; Rodríguez-Ramos, L. F.; Fernández-Valdivia, Juan J.; Marichal-Hernández, José G.; Rodríguez-Ramos, J. M.

2014-05-01

Modern astronomic telescopes take advantage of multi-conjugate adaptive optics, in which wavefront sensors play a key role. A single sensor capable of measuring wavefront phases at any angle of observation would be helpful when improving atmospheric tomographic reconstruction. A new sensor combining both geometric and plenoptic arrangements is proposed, and a simulation demonstrating its working principle is also shown. Results show that this sensor is feasible, and also that single extended objects can be used to perform tomography of atmospheric turbulence.

Computational Materials: Modeling and Simulation of Nanostructured Materials and Systems

NASA Technical Reports Server (NTRS)

Gates, Thomas S.; Hinkley, Jeffrey A.

2003-01-01

The paper provides details on the structure and implementation of the Computational Materials program at the NASA Langley Research Center. Examples are given that illustrate the suggested approaches to predicting the behavior and influencing the design of nanostructured materials such as high-performance polymers, composites, and nanotube-reinforced polymers. Primary simulation and measurement methods applicable to multi-scale modeling are outlined. Key challenges including verification and validation of models are highlighted and discussed within the context of NASA's broad mission objectives.

Wave Energy Prize - 1/20th Testing - AquaHarmonics

DOE Data Explorer

Scharmen, Wesley

2016-09-02

Data from the 1/20th scale testing data completed on the Wave Energy Prize for the AquaHarmonics team, including the 1/20th scale test plan, raw test data, video, photos, and data analysis results. The top level objective of the 1/20th scale device testing is to obtain the necessary measurements required for determining Average Climate Capture Width per Characteristic Capital Expenditure (ACE) and the Hydrodynamic Performance Quality (HPQ), key metrics for determining the Wave Energy Prize (WEP) winners.

Wave Energy Prize - 1/20th Testing - Waveswing America

DOE Data Explorer

Scharmen, Wesley

2016-08-19

Data from the 1/20th scale testing data completed on the Wave Energy Prize for the Waveswing America team, including the 1/20th scale test plan, raw test data, video, photos, and data analysis results. The top level objective of the 1/20th scale device testing is to obtain the necessary measurements required for determining Average Climate Capture Width per Characteristic Capital Expenditure (ACE) and the Hydrodynamic Performance Quality (HPQ), key metrics for determining the Wave Energy Prize (WEP) winners.

Wave Energy Prize - 1/20th Testing - M3 Wave

DOE Data Explorer

Wesley Scharmen

2016-08-12

Data from the 1/20th scale testing data completed on the Wave Energy Prize for the M3 Wave team, including the 1/20th scale test plan, raw test data, video, photos, and data analysis results. The top level objective of the 1/20th scale device testing is to obtain the necessary measurements required for determining Average Climate Capture Width per Characteristic Capital Expenditure (ACE) and the Hydrodynamic Performance Quality (HPQ), key metrics for determining the Wave Energy Prize (WEP) winners.

Wave Energy Prize - 1/20th Testing - Sea Potential

DOE Data Explorer

Scharmen, Wesley

2016-09-23

Data from the 1/20th scale testing data completed on the Wave Energy Prize for the Sea Potential team, including the 1/20th scale test plan, raw test data, video, photos, and data analysis results. The top level objective of the 1/20th scale device testing is to obtain the necessary measurements required for determining Average Climate Capture Width per Characteristic Capital Expenditure (ACE) and the Hydrodynamic Performance Quality (HPQ), key metrics for determining the Wave Energy Prize (WEP) winners.

Wave Energy Prize - 1/20th Testing - Oscilla Power

DOE Data Explorer

Scharmen, Wesley

2016-09-16

Data from the 1/20th scale testing data completed on the Wave Energy Prize for the Oscilla Power team, including the 1/20th Test Plan, raw test data, video, photos, and data analysis results. The top level objective of the 1/20th scale device testing is to obtain the necessary measurements required for determining Average Climate Capture Width per Characteristic Capital Expenditure (ACE) and the Hydrodynamic Performance Quality (HPQ), key metrics for determining the WEPrize winners.

Wave Energy Prize - 1/20th Testing - RTI Wave Power

DOE Data Explorer

Scharmen, Wesley

2016-09-30

Data from the 1/20th scale testing data completed on the Wave Energy Prize for the RTI Wave Power team, including the 1/20th Test Plan, raw test data, video, photos, and data analysis results. The top level objective of the 1/20th scale device testing is to obtain the necessary measurements required for determining Average Climate Capture Width per Characteristic Capital Expenditure (ACE) and the Hydrodynamic Performance Quality (HPQ), key metrics for determining the Wave Energy Prize (WEP) winners.

Wave Energy Prize - 1/20th Testing - Harvest Wave Energy

DOE Data Explorer

Wesley Scharmen

2016-08-26

Data from the 1/20th scale testing data completed on the Wave Energy Prize for the Harvest Wave Energy team, including the 1/20th scale test plan, raw test data, video, photos, and data analysis results. The top level objective of the 1/20th scale device testing is to obtain the necessary measurements required for determining Average Climate Capture Width per Characteristic Capital Expenditure (ACE) and the Hydrodynamic Performance Quality (HPQ), key metrics for determining the Wave Energy Prize (WEP) winners.

Improving Attachments of Remotely-Deployed Dorsal Fin-Mounted Tags: Tissue Structure, Hydrodynamics, in Situ Performance, and Tagged-Animal Follow-Up

DTIC Science & Technology

2010-09-30

and let them see a whale tagging operation first hand in Puget Sound ; we polished up our objectives and refined our methods, and have come up with...examination based on differences such as size/shape of the dorsal fin (e.g., melon-headed versus killer whale ), taxonomic grouping (i.e., odontocetes...navy sonar - beaked whales ; ship strikes - fin whales ; ecological role – killer whales ). 3. In situ behavior of retention system elements (Key

Two Birds With One Stone: Application of Fundamental Cognitive Theory of Visual Perception Supporting Fratricide Prevention and Sensor Modeling Experimentation

DTIC Science & Technology

2008-12-01

tools capable of reducing fratricide and collateral damage. The theory of recognition-by-components developed by Dr. Irving Biederman presented a...trainer. The key to thermal combat identification was discovered in an unusual place: chick sexing. Biederman and Shiffrar [11] conducted object...professional sexers was .82. Biederman and Shiffrar conclude that “…after instruction the performance of the naïve subjects more closely resemble that of the

User Interaction Design for a Home-Based Telecare System

NASA Astrophysics Data System (ADS)

Raptis, Spyros; Tsiakoulis, Pirros; Chalamandaris, Aimilios; Karabetsos, Sotiris

This paper presents the design of the user-interaction component of a home-based telecare system for congestive heart failure patients. It provides a short overview of the overall system and offers details on the different interaction types supported by the system. Interacting with the user occurs either as part of a scheduled procedure or as a consequence of identifying or predicting a potentially hazardous deterioration of the patients' health state. The overall logic of the interaction is structured around event-scenario associations, where a scenario consists of concrete actions to be performed, some of which may involve the patient. A key objective in this type of interaction that it is very simple, intuitive and short, involving common everyday objects and familiar media such as speech.

Information management system study results. Volume 1: IMS study results

NASA Technical Reports Server (NTRS)

1971-01-01

The information management system (IMS) special emphasis task was performed as an adjunct to the modular space station study, with the objective of providing extended depth of analysis and design in selected key areas of the information management system. Specific objectives included: (1) in-depth studies of IMS requirements and design approaches; (2) design and fabricate breadboard hardware for demonstration and verification of design concepts; (3) provide a technological base to identify potential design problems and influence long range planning (4) develop hardware and techniques to permit long duration, low cost, manned space operations; (5) support SR&T areas where techniques or equipment are considered inadequate; and (6) permit an overall understanding of the IMS as an integrated component of the space station.

'Geo'chemical research: a key building block for nuclear waste disposal safety cases.

PubMed

Altmann, Scott

2008-12-12

Disposal of high level radioactive waste in deep underground repositories has been chosen as solution by several countries. Because of the special status this type waste has in the public mind, national implementation programs typically mobilize massive R&D efforts, last decades and are subject to extremely detailed and critical social-political scrutiny. The culminating argument of each program is a 'Safety Case' for a specific disposal concept containing, among other elements, the results of performance assessment simulations whose object is to model the release of radionuclides to the biosphere. Public and political confidence in performance assessment results (which generally show that radionuclide release will always be at acceptable levels) is based on their confidence in the quality of the scientific understanding in the processes included in the performance assessment model, in particular those governing radionuclide speciation and mass transport in the geological host formation. Geochemistry constitutes a core area of research in this regard. Clay-mineral rich formations are the subjects of advanced radwaste programs in several countries (France, Belgium, Switzerland...), principally because of their very low permeabilities and demonstrated capacities to retard by sorption most radionuclides. Among the key processes which must be represented in performance assessment models are (i) radioelement speciation (redox state, speciation, reactions determining radionuclide solid-solution partitioning) and (ii) diffusion-driven transport. The safety case must therefore demonstrate a detailed understanding of the physical-chemical phenomena governing the effects of these two aspects, for each radionuclide, within the geological barrier system. A wide range of coordinated (and internationally collaborated) research has been, and is being, carried out in order to gain the detailed scientific understanding needed for constructing those parts of the Safety Case supporting how radionuclide transfer is represented in the performance assessment model. The objective here is to illustrate how geochemical research contributes to this process and, above all, to identify a certain number of subjects which should be treated in priority.

Astrophysics of Reference Frame Tie Objects

NASA Technical Reports Server (NTRS)

Johnston, Kenneth J.; Boboltz, David; Fey, Alan Lee; Gaume, Ralph A.; Zacharias, Norbert

2004-01-01

The Astrophysics of Reference Frame Tie Objects Key Science program will investigate the underlying physics of SIM grid objects. Extragalactic objects in the SIM grid will be used to tie the SIM reference frame to the quasi-inertial reference frame defined by extragalactic objects and to remove any residual frame rotation with respect to the extragalactic frame. The current realization of the extragalactic frame is the International Celestial Reference Frame (ICRF). The ICRF is defined by the radio positions of 212 extragalactic objects and is the IAU sanctioned fundamental astronomical reference frame. This key project will advance our knowledge of the physics of the objects which will make up the SIM grid, such as quasars and chromospherically active stars, and relates directly to the stability of the SIM reference frame. The following questions concerning the physics of reference frame tie objects will be investigated.

Entanglement-distillation attack on continuous-variable quantum key distribution in a turbulent atmospheric channel

NASA Astrophysics Data System (ADS)

Guo, Ying; Xie, Cailang; Liao, Qin; Zhao, Wei; Zeng, Guihua; Huang, Duan

2017-08-01

The survival of Gaussian quantum states in a turbulent atmospheric channel is of crucial importance in free-space continuous-variable (CV) quantum key distribution (QKD), in which the transmission coefficient will fluctuate in time, thus resulting in non-Gaussian quantum states. Different from quantum hacking of the imperfections of practical devices, here we propose a different type of attack by exploiting the security loopholes that occur in a real lossy channel. Under a turbulent atmospheric environment, the Gaussian states are inevitably afflicted by decoherence, which would cause a degradation of the transmitted entanglement. Therefore, an eavesdropper can perform an intercept-resend attack by applying an entanglement-distillation operation on the transmitted non-Gaussian mixed states, which allows the eavesdropper to bias the estimation of the parameters and renders the final keys shared between the legitimate parties insecure. Our proposal highlights the practical CV QKD vulnerabilities with free-space quantum channels, including the satellite-to-earth links, ground-to-ground links, and a link from moving objects to ground stations.

NASA and Industry Benefits of ACTS High Speed Network Interoperability Experiments

NASA Technical Reports Server (NTRS)

Zernic, M. J.; Beering, D. R.; Brooks, D. E.

2000-01-01

This paper provides synopses of the design. implementation, and results of key high data rate communications experiments utilizing the technologies of NASA's Advanced Communications Technology Satellite (ACTS). Specifically, the network protocol and interoperability performance aspects will be highlighted. The objectives of these key experiments will be discussed in their relevant context to NASA missions, as well as, to the comprehensive communications industry. Discussion of the experiment implementation will highlight the technical aspects of hybrid network connectivity, a variety of high-speed interoperability architectures, a variety of network node platforms, protocol layers, internet-based applications, and new work focused on distinguishing between link errors and congestion. In addition, this paper describes the impact of leveraging government-industry partnerships to achieve technical progress and forge synergistic relationships. These relationships will be the key to success as NASA seeks to combine commercially available technology with its own internal technology developments to realize more robust and cost effective communications for space operations.

Performance evaluation of different types of particle representation procedures of Particle Swarm Optimization in Job-shop Scheduling Problems

NASA Astrophysics Data System (ADS)

Izah Anuar, Nurul; Saptari, Adi

2016-02-01

This paper addresses the types of particle representation (encoding) procedures in a population-based stochastic optimization technique in solving scheduling problems known in the job-shop manufacturing environment. It intends to evaluate and compare the performance of different particle representation procedures in Particle Swarm Optimization (PSO) in the case of solving Job-shop Scheduling Problems (JSP). Particle representation procedures refer to the mapping between the particle position in PSO and the scheduling solution in JSP. It is an important step to be carried out so that each particle in PSO can represent a schedule in JSP. Three procedures such as Operation and Particle Position Sequence (OPPS), random keys representation and random-key encoding scheme are used in this study. These procedures have been tested on FT06 and FT10 benchmark problems available in the OR-Library, where the objective function is to minimize the makespan by the use of MATLAB software. Based on the experimental results, it is discovered that OPPS gives the best performance in solving both benchmark problems. The contribution of this paper is the fact that it demonstrates to the practitioners involved in complex scheduling problems that different particle representation procedures can have significant effects on the performance of PSO in solving JSP.

Local and global evaluation for remote sensing image segmentation

NASA Astrophysics Data System (ADS)

Su, Tengfei; Zhang, Shengwei

2017-08-01

In object-based image analysis, how to produce accurate segmentation is usually a very important issue that needs to be solved before image classification or target recognition. The study for segmentation evaluation method is key to solving this issue. Almost all of the existent evaluation strategies only focus on the global performance assessment. However, these methods are ineffective for the situation that two segmentation results with very similar overall performance have very different local error distributions. To overcome this problem, this paper presents an approach that can both locally and globally quantify segmentation incorrectness. In doing so, region-overlapping metrics are utilized to quantify each reference geo-object's over and under-segmentation error. These quantified error values are used to produce segmentation error maps which have effective illustrative power to delineate local segmentation error patterns. The error values for all of the reference geo-objects are aggregated through using area-weighted summation, so that global indicators can be derived. An experiment using two scenes of very different high resolution images showed that the global evaluation part of the proposed approach was almost as effective as other two global evaluation methods, and the local part was a useful complement to comparing different segmentation results.

Stochastic resonance investigation of object detection in images

NASA Astrophysics Data System (ADS)

Repperger, Daniel W.; Pinkus, Alan R.; Skipper, Julie A.; Schrider, Christina D.

2007-02-01

Object detection in images was conducted using a nonlinear means of improving signal to noise ratio termed "stochastic resonance" (SR). In a recent United States patent application, it was shown that arbitrarily large signal to noise ratio gains could be realized when a signal detection problem is cast within the context of a SR filter. Signal-to-noise ratio measures were investigated. For a binary object recognition task (friendly versus hostile), the method was implemented by perturbing the recognition algorithm and subsequently thresholding via a computer simulation. To fairly test the efficacy of the proposed algorithm, a unique database of images has been constructed by modifying two sample library objects by adjusting their brightness, contrast and relative size via commercial software to gradually compromise their saliency to identification. The key to the use of the SR method is to produce a small perturbation in the identification algorithm and then to threshold the results, thus improving the overall system's ability to discern objects. A background discussion of the SR method is presented. A standard test is proposed in which object identification algorithms could be fairly compared against each other with respect to their relative performance.

Time assignment system and its performance aboard the Hitomi satellite

NASA Astrophysics Data System (ADS)

Terada, Yukikatsu; Yamaguchi, Sunao; Sugimoto, Shigenobu; Inoue, Taku; Nakaya, Souhei; Murakami, Maika; Yabe, Seiya; Oshimizu, Kenya; Ogawa, Mina; Dotani, Tadayasu; Ishisaki, Yoshitaka; Mizushima, Kazuyo; Kominato, Takashi; Mine, Hiroaki; Hihara, Hiroki; Iwase, Kaori; Kouzu, Tomomi; Tashiro, Makoto S.; Natsukari, Chikara; Ozaki, Masanobu; Kokubun, Motohide; Takahashi, Tadayuki; Kawakami, Satoko; Kasahara, Masaru; Kumagai, Susumu; Angelini, Lorella; Witthoeft, Michael

2018-01-01

Fast timing capability in x-ray observation of astrophysical objects is one of the key properties for the ASTRO-H (Hitomi) mission. Absolute timing accuracies of 350 or 35 μs are required to achieve nominal scientific goals or to study fast variabilities of specific sources. The satellite carries a GPS receiver to obtain accurate time information, which is distributed from the central onboard computer through the large and complex SpaceWire network. The details of the time system on the hardware and software design are described. In the distribution of the time information, the propagation delays and jitters affect the timing accuracy. Six other items identified within the timing system will also contribute to absolute time error. These error items have been measured and checked on ground to ensure the time error budgets meet the mission requirements. The overall timing performance in combination with hardware performance, software algorithm, and the orbital determination accuracies, etc. under nominal conditions satisfies the mission requirements of 35 μs. This work demonstrates key points for space-use instruments in hardware and software designs and calibration measurements for fine timing accuracy on the order of microseconds for midsized satellites using the SpaceWire (IEEE1355) network.

Performance modelling of miniaturized flash-imaging lidars for future mars exploration missions

NASA Astrophysics Data System (ADS)

Mitev, V.; Pollini, A.; Haesler, J.; Pereira do Carmo, João.

2017-11-01

Future planetary exploration missions require the support of 3D vision in the GN&C during key spacecraft's proximity phases, namely: i) spacecraft precision and soft Landing on the planet's surface; ii) Rendezvous and Docking (RVD) between a Sample Canister (SC) and an orbiter spacecraft; iii) Rover Navigation (RN) on planetary surface. The imaging LiDARs are among the best candidate for such tasks [1-3]. The combination of measurement requirements and environmental conditions seems to find its optimum in the flash 3D LiDAR architecture. Here we present key steps is the evaluation of novelty light detectors and MOEMS (Micro-Opto- Electro-Mechanical Systems) technologies with respect to LiDAR system performance and miniaturization. The objectives of the project MILS (Miniaturized Imaging LiDAR System, Phase 1) concentrated on the evaluation of novel detection and scanning technologies for the miniaturization of 3D LiDARs intended for planetary mission. Preliminary designs for an elegant breadboard (EBB) for the three tasks stated above (Landing, RVD and RN) were proposed, based on results obtained with a numerical model developed in the project and providing the performances evaluation of imaging LiDARs.

Selecting among competing models of electro-optic, infrared camera system range performance

USGS Publications Warehouse

Nichols, Jonathan M.; Hines, James E.; Nichols, James D.

2013-01-01

Range performance is often the key requirement around which electro-optical and infrared camera systems are designed. This work presents an objective framework for evaluating competing range performance models. Model selection based on the Akaike’s Information Criterion (AIC) is presented for the type of data collected during a typical human observer and target identification experiment. These methods are then demonstrated on observer responses to both visible and infrared imagery in which one of three maritime targets was placed at various ranges. We compare the performance of a number of different models, including those appearing previously in the literature. We conclude that our model-based approach offers substantial improvements over the traditional approach to inference, including increased precision and the ability to make predictions for some distances other than the specific set for which experimental trials were conducted.

Modeling and evaluating the performance of Brillouin distributed optical fiber sensors.

PubMed

Soto, Marcelo A; Thévenaz, Luc

2013-12-16

A thorough analysis of the key factors impacting on the performance of Brillouin distributed optical fiber sensors is presented. An analytical expression is derived to estimate the error on the determination of the Brillouin peak gain frequency, based for the first time on real experimental conditions. This expression is experimentally validated, and describes how this frequency uncertainty depends on measurement parameters, such as Brillouin gain linewidth, frequency scanning step and signal-to-noise ratio. Based on the model leading to this expression and considering the limitations imposed by nonlinear effects and pump depletion, a figure-of-merit is proposed to fairly compare the performance of Brillouin distributed sensing systems. This figure-of-merit offers to the research community and to potential users the possibility to evaluate with an objective metric the real performance gain resulting from any proposed configuration.

Magnesium Object Manager Sandbox, A More Effective Sandbox Method for Windows 7

DTIC Science & Technology

2012-03-01

keys, synchronization primitives , etc.). The object body is specific to, and the same for, each object type; it contains information common to each...the Object Directory Specific Rights Synchronization Object (Event, Mutex, Semaphore , Timer) Synchronization objects allow multiple threads to... Synchronization Object Specific Rights . . . . . . . . . . . . . . . . . . . . . 19 2.5 File Object Specific Rights

Heterozygous Che-1 KO mice show deficiencies in object recognition memory persistence.

PubMed

Zalcman, Gisela; Corbi, Nicoletta; Di Certo, Maria Grazia; Mattei, Elisabetta; Federman, Noel; Romano, Arturo

2016-10-06

Transcriptional regulation is a key process in the formation of long-term memories. Che-1 is a protein involved in the regulation of gene transcription that has recently been proved to bind the transcription factor NF-κB, which is known to be involved in many memory-related molecular events. This evidence prompted us to investigate the putative role of Che-1 in memory processes. For this study we newly generated a line of Che-1(+/-) heterozygous mice. Che-1 homozygous KO mouse is lethal during development, but Che-1(+/-) heterozygous mouse is normal in its general anatomical and physiological characteristics. We analyzed the behavioral characteristic and memory performance of Che-1(+/-) mice in two NF-κB dependent types of memory. We found that Che-1(+/-) mice show similar locomotor activity and thigmotactic behavior than wild type (WT) mice in an open field. In a similar way, no differences were found in anxiety-like behavior between Che-1(+/-) and WT mice in an elevated plus maze as well as in fear response in a contextual fear conditioning (CFC) and object exploration in a novel object recognition (NOR) task. No differences were found between WT and Che-1(+/-) mice performance in CFC training and when tested at 24h or 7days after training. Similar performance was found between groups in NOR task, both in training and 24h testing performance. However, we found that object recognition memory persistence at 7days was impaired in Che-1(+/-) heterozygous mice. This is the first evidence showing that Che-1 is involved in memory processes. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

SMITHERS: An object-oriented modular mapping methodology for MCNP-based neutronic–thermal hydraulic multiphysics

DOE PAGES

Richard, Joshua; Galloway, Jack; Fensin, Michael; ...

2015-04-04

A novel object-oriented modular mapping methodology for externally coupled neutronics–thermal hydraulics multiphysics simulations was developed. The Simulator using MCNP with Integrated Thermal-Hydraulics for Exploratory Reactor Studies (SMITHERS) code performs on-the-fly mapping of material-wise power distribution tallies implemented by MCNP-based neutron transport/depletion solvers for use in estimating coolant temperature and density distributions with a separate thermal-hydraulic solver. The key development of SMITHERS is that it reconstructs the hierarchical geometry structure of the material-wise power generation tallies from the depletion solver automatically, with only a modicum of additional information required from the user. In addition, it performs the basis mapping from themore » combinatorial geometry of the depletion solver to the required geometry of the thermal-hydraulic solver in a generalizable manner, such that it can transparently accommodate varying levels of thermal-hydraulic solver geometric fidelity, from the nodal geometry of multi-channel analysis solvers to the pin-cell level of discretization for sub-channel analysis solvers.« less

Dakota, a multilevel parallel object-oriented framework for design optimization, parameter estimation, uncertainty quantification, and sensitivity analysis :

DOE Office of Scientific and Technical Information (OSTI.GOV)

Adams, Brian M.; Ebeida, Mohamed Salah; Eldred, Michael S.

The Dakota (Design Analysis Kit for Optimization and Terascale Applications) toolkit provides a exible and extensible interface between simulation codes and iterative analysis methods. Dakota contains algorithms for optimization with gradient and nongradient-based methods; uncertainty quanti cation with sampling, reliability, and stochastic expansion methods; parameter estimation with nonlinear least squares methods; and sensitivity/variance analysis with design of experiments and parameter study methods. These capabilities may be used on their own or as components within advanced strategies such as surrogate-based optimization, mixed integer nonlinear programming, or optimization under uncertainty. By employing object-oriented design to implement abstractions of the key components requiredmore » for iterative systems analyses, the Dakota toolkit provides a exible and extensible problem-solving environment for design and performance analysis of computational models on high performance computers. This report serves as a user's manual for the Dakota software and provides capability overviews and procedures for software execution, as well as a variety of example studies.« less

Assessing Continuous Quality Improvement in Public Health: Adapting Lessons from Healthcare

PubMed Central

Schwartz, Robert; Cohen, Joanna; Manson, Heather; Scott, Fran

2017-01-01

Context: Evidence of the effect of continuous quality improvement (CQI) in public health and valid tools to judge that such effects are not fully formed. Objective: The objective was to adapt and apply Shortell et al.'s (1998) four dimensions of CQI in an examination of a public health accountability and performance management initiative in Ontario, Canada. Methods: In total, 24 semi-structured, in-depth interviews were conducted with informants from public health units and the Ministry of Health and Long-Term Care. A web survey of public health managers in the province was also carried out. Results: A mix of facilitators and barriers was identified. Leadership and organizational cultures, conducive to CQI success were evident. However, limitations in performance measurement and managerial discretion were key barriers. Conclusion: The four dimensions of CQI provided insight into both facilitators and barriers of CQI adoption in public health. Future research should compare the outcomes of public health CQI initiatives to the framework's stated facilitators and barriers. PMID:28277203

Constructing a strategy map for banking institutions with key performance indicators of the balanced scorecard.

PubMed

Wu, Hung-Yi

2012-08-01

This study presents a structural evaluation methodology to link key performance indicators (KPIs) into a strategy map of the balanced scorecard (BSC) for banking institutions. Corresponding with the four BSC perspectives (finance, customer, internal business process, and learning and growth), the most important evaluation indicators of banking performance are synthesized from the relevant literature and screened by a committee of experts. The Decision Making Trial and Evaluation Laboratory (DEMATEL) method, a multiple criteria analysis tool, is then employed to determine the causal relationships between the KPIs, to identify the critical central and influential factors, and to establish a visualized strategy map with logical links to improve banking performance. An empirical application is provided as an example. According to the expert evaluations, the three most essential KPIs for banking performance are customer satisfaction, sales performance, and customer retention rate. The DEMATEL results demonstrate a clear road map to assist management in prioritizing the performance indicators and in focusing attention on the strategy-related activities of the crucial indicators. According to the constructed strategy map, management could better invest limited resources in the areas that need improvement most. Although these strategy maps of the BSC are not universal, the research results show that the presented approach is an objective and feasible way to construct strategy maps more justifiably. The proposed framework can be applicable to institutions in other industries as well. Copyright © 2011 Elsevier Ltd. All rights reserved.

Cryptographic framework for document-objects resulting from multiparty collaborative transactions.

PubMed

Goh, A

2000-01-01

Multiparty transactional frameworks--i.e. Electronic Data Interchange (EDI) or Health Level (HL) 7--often result in composite documents which can be accurately modelled using hyperlinked document-objects. The structural complexity arising from multiauthor involvement and transaction-specific sequencing would be poorly handled by conventional digital signature schemes based on a single evaluation of a one-way hash function and asymmetric cryptography. In this paper we outline the generation of structure-specific authentication hash-trees for the the authentication of transactional document-objects, followed by asymmetric signature generation on the hash-tree value. Server-side multi-client signature verification would probably constitute the single most compute-intensive task, hence the motivation for our usage of the Rabin signature protocol which results in significantly reduced verification workloads compared to the more commonly applied Rivest-Shamir-Adleman (RSA) protocol. Data privacy is handled via symmetric encryption of message traffic using session-specific keys obtained through key-negotiation mechanisms based on discrete-logarithm cryptography. Individual client-to-server channels can be secured using a double key-pair variation of Diffie-Hellman (DH) key negotiation, usage of which also enables bidirectional node authentication. The reciprocal server-to-client multicast channel is secured through Burmester-Desmedt (BD) key-negotiation which enjoys significant advantages over the usual multiparty extensions to the DH protocol. The implementation of hash-tree signatures and bi/multidirectional key negotiation results in a comprehensive cryptographic framework for multiparty document-objects satisfying both authentication and data privacy requirements.

Effects of a group-based reproductive management extension programme on key management outcomes affecting reproductive performance.

PubMed

Brownlie, Tom S; Morton, John M; Heuer, Cord; McDougall, Scott

2015-02-01

A group-based reproductive management extension programme has been designed to help managers of dairy herds improve herd reproductive performance. The aims of this study were, firstly, to assess effects of participation by key decision makers (KDMs) in a farmer action group programme in 2009 and 2010 on six key management outcomes (KMOs) that affect reproductive performance over 2 years (2009-2010 and 2010-2011), and secondly, to describe KDM intentions to change management behaviour(s) affecting each management outcome after participation in the programme. Seasonal calving dairy herds from four regions of New Zealand were enrolled in the study. Intentions to modify management behaviour were recorded using the formal written action plans developed during the extension programme. KMOs assessed were calving pattern of the herd, pre-calving heifer liveweight, pre-calving and premating body condition score (BCS), oestrus detection, anoestrus cow management and bull management. Participation was associated with improvements in heifer liveweight, more heifers calving in the first 6 weeks of the seasonal calving period, premating BCS and oestrus detection. No significant effects were observed on anoestrus cow management or bull management. KDMs with greater numbers of proposed actions had lower 6 week in-calf rates in the second study year than KDMs who proposed fewer actions. A more effective strategy to ensure more appropriate objectives is proposed. Strategies to help KDMs to implement proposed actions more successfully should be investigated to improve the programme further. Copyright © 2014 Elsevier Ltd. All rights reserved.

Examining the influence of family physician supply on district health system performance in South Africa: An ecological analysis of key health indicators.

PubMed

Von Pressentin, Klaus B; Mash, Bob J; Esterhuizen, Tonya M

2017-04-28

The supply of appropriate health workers is a key building block in the World Health Organization's model of effective health systems. Primary care teams are stronger if they contain doctors with postgraduate training in family medicine. The contribution of such family physicians to the performance of primary care systems has not been evaluated in the African context. Family physicians with postgraduate training entered the South African district health system (DHS) from 2011. This study aimed to evaluate the impact of family physicians within the DHS of South Africa. The objectives were to evaluate the impact of an increase in family physician supply in each district (number per 10 000 population) on key health indicators. All 52 South African health districts were included as units of analysis. An ecological study evaluated the correlations between the supply of family physicians and routinely collected data on district performance for two time periods: 2010/2011 and 2014/2015. Five years after the introduction of the new generation of family physicians, this study showed no demonstrable correlation between family physician supply and improved health indicators from the macro-perspective of the district. The lack of a measurable impact at the level of the district is most likely because of the very low supply of family physicians in the public sector. Studies which evaluate impact closer to the family physician's circle of control may be better positioned to demonstrate a measurable impact in the short term.

Management Matters: A Leverage Point for Health Systems Strengthening in Global Health

PubMed Central

Bradley, Elizabeth H.; Taylor, Lauren A.; Cuellar, Carlos J.

2015-01-01

Despite a renewed focus in the field of global health on strengthening health systems, inadequate attention has been directed to a key ingredient of high-performing health systems: management. We aimed to develop the argument that management – defined here as the process of achieving predetermined objectives through human, financial, and technical resources – is a cross-cutting function necessary for success in all World Health Organization (WHO) building blocks of health systems strengthening. Management within health systems is particularly critical in low-income settings where the efficient use of scarce resources is paramount to attaining health goals. More generally, investments in management capacity may be viewed as a key leverage point in grand strategy, as strong management enables the achievement of large ends with limited means. We also sought to delineate a set of core competencies and identify key roles to be targeted for management capacity building efforts. Several effective examples of management interventions have been described in the research literature. Together, the existing evidence underscores the importance of country ownership of management capacity building efforts, which often challenge the status quo and thus need country leadership to sustain despite inevitable friction. The literature also recognizes that management capacity efforts, as a key ingredient of effective systems change, take time to embed, as new protocols and ways of working become habitual and integrated as standard operating procedures. Despite these challenges, the field of health management as part of global health system strengthening efforts holds promise as a fundamental leverage point for achieving health system performance goals with existing human, technical, and financial resources. The evidence base consistently supports the role of management in performance improvement but would benefit from additional research with improved methodological rigor and longer-time horizon investigations. Meanwhile, greater emphasis on management as a critical element of global health efforts may open new and sustainable avenues for advancing health systems performance. PMID:26188805

Management Matters: A Leverage Point for Health Systems Strengthening in Global Health.

PubMed

Bradley, Elizabeth H; Taylor, Lauren A; Cuellar, Carlos J

2015-05-20

Despite a renewed focus in the field of global health on strengthening health systems, inadequate attention has been directed to a key ingredient of high-performing health systems: management. We aimed to develop the argument that management - defined here as the process of achieving predetermined objectives through human, financial, and technical resources - is a cross-cutting function necessary for success in all World Health Organization (WHO) building blocks of health systems strengthening. Management within health systems is particularly critical in low-income settings where the efficient use of scarce resources is paramount to attaining health goals. More generally, investments in management capacity may be viewed as a key leverage point in grand strategy, as strong management enables the achievement of large ends with limited means. We also sought to delineate a set of core competencies and identify key roles to be targeted for management capacity building efforts. Several effective examples of management interventions have been described in the research literature. Together, the existing evidence underscores the importance of country ownership of management capacity building efforts, which often challenge the status quo and thus need country leadership to sustain despite inevitable friction. The literature also recognizes that management capacity efforts, as a key ingredient of effective systems change, take time to embed, as new protocols and ways of working become habitual and integrated as standard operating procedures. Despite these challenges, the field of health management as part of global health system strengthening efforts holds promise as a fundamental leverage point for achieving health system performance goals with existing human, technical, and financial resources. The evidence base consistently supports the role of management in performance improvement but would benefit from additional research with improved methodological rigor and longer-time horizon investigations. Meanwhile, greater emphasis on management as a critical element of global health efforts may open new and sustainable avenues for advancing health systems performance. © 2015 by Kerman University of Medical Sciences.

Stereotactic radiosurgery for tremor: systematic review.

PubMed

Martínez-Moreno, Nuria E; Sahgal, Arjun; De Salles, Antonio; Hayashi, Motohiro; Levivier, Marc; Ma, Lijun; Paddick, Ian; Régis, Jean; Ryu, Sam; Slotman, Ben J; Martínez-Álvarez, Roberto

2018-02-23

OBJECTIVE The aim of this systematic review is to offer an objective summary of the published literature relating to stereotactic radiosurgery (SRS) for tremor and consensus guideline recommendations. METHODS This systematic review was performed up to December 2016. Article selection was performed by searching the MEDLINE (PubMed) and EMBASE electronic bibliographic databases. The following key words were used: "radiosurgery" and "tremor" or "Parkinson's disease" or "multiple sclerosis" or "essential tremor" or "thalamotomy" or "pallidotomy." The search strategy was not limited by study design but only included key words in the English language, so at least the abstract had to be in English. RESULTS A total of 34 full-text articles were included in the analysis. Three studies were prospective studies, 1 was a retrospective comparative study, and the remaining 30 were retrospective studies. The one retrospective comparative study evaluating deep brain stimulation (DBS), radiofrequency thermocoagulation (RFT), and SRS reported similar tremor control rates, more permanent complications after DBS and RFT, more recurrence after RFT, and a longer latency period to clinical response with SRS. Similar tremor reduction rates in most of the reports were observed with SRS thalamotomy (mean 88%). Clinical complications were rare and usually not permanent (range 0%-100%, mean 17%, median 2%). Follow-up in general was too short to confirm long-term results. CONCLUSIONS SRS to the unilateral thalamic ventral intermediate nucleus, with a dose of 130-150 Gy, is a well-tolerated and effective treatment for reducing medically refractory tremor, and one that is recommended by the International Stereotactic Radiosurgery Society.

Information Management of Web Application Based Environmental Performance Management in Concentrating Division of PTFI

NASA Astrophysics Data System (ADS)

Susanto, Arif; Mulyono, Nur Budi

2018-02-01

The changes of environmental management system standards into the latest version, i.e. ISO 14001:2015, may cause a change on a data and information need in decision making and achieving the objectives in the organization coverage. Information management is the organization's responsibility to ensure that effectiveness and efficiency start from its creating, storing, processing and distribution processes to support operations and effective decision making activity in environmental performance management. The objective of this research was to set up an information management program and to adopt the technology as the supporting component of the program which was done by PTFI Concentrating Division so that it could be in line with the desirable organization objective in environmental management based on ISO 14001:2015 environmental management system standards. Materials and methods used covered technical aspects in information management, i.e. with web-based application development by using usage centered design. The result of this research showed that the use of Single Sign On gave ease to its user to interact further on the use of the environmental management system. Developing a web-based through creating entity relationship diagram (ERD) and information extraction by conducting information extraction which focuses on attributes, keys, determination of constraints. While creating ERD is obtained from relational database scheme from a number of database from environmental performances in Concentrating Division.

Identifying and Modeling Dynamic Preference Evolution in Multipurpose Water Resources Systems

NASA Astrophysics Data System (ADS)

Mason, E.; Giuliani, M.; Castelletti, A.; Amigoni, F.

2018-04-01

Multipurpose water systems are usually operated on a tradeoff of conflicting operating objectives. Under steady state climatic and socioeconomic conditions, such tradeoff is supposed to represent a fair and/or efficient preference. Extreme variability in external forcing might affect water operators' risk aversion and force a change in her/his preference. Properly accounting for these shifts is key to any rigorous retrospective assessment of the operator's behaviors, and to build descriptive models for projecting the future system evolution. In this study, we explore how the selection of different preferences is linked to variations in the external forcing. We argue that preference selection evolves according to recent, extreme variations in system performance: underperforming in one of the objectives pushes the preference toward the harmed objective. To test this assumption, we developed a rational procedure to simulate the operator's preference selection. We map this selection onto a multilateral negotiation, where multiple virtual agents independently optimize different objectives. The agents periodically negotiate a compromise policy for the operation of the system. Agents' attitudes in each negotiation step are determined by the recent system performance measured by the specific objective they maximize. We then propose a numerical model of preference dynamics that implements a concept from cognitive psychology, the availability bias. We test our modeling framework on a synthetic lake operated for flood control and water supply. Results show that our model successfully captures the operator's preference selection and dynamic evolution driven by extreme wet and dry situations.

Reach on sound: a key to object permanence in visually impaired children.

PubMed

Fazzi, Elisa; Signorini, Sabrina Giovanna; Bomba, Monica; Luparia, Antonella; Lanners, Josée; Balottin, Umberto

2011-04-01

The capacity to reach an object presented through sound clue indicates, in the blind child, the acquisition of object permanence and gives information over his/her cognitive development. To assess cognitive development in congenitally blind children with or without multiple disabilities. Cohort study. Thirty-seven congenitally blind subjects (17 with associated multiple disabilities, 20 mainly blind) were enrolled. We used Bigelow's protocol to evaluate "reach on sound" capacity over time (at 6, 12, 18, 24, and 36 months), and a battery of clinical, neurophysiological and cognitive instruments to assess clinical features. Tasks n.1 to 5 were acquired by most of the mainly blind children by 12 months of age. Task 6 coincided with a drop in performance, and the acquisition of the subsequent tasks showed a less agehomogeneous pattern. In blind children with multiple disabilities, task acquisition rates were lower, with the curves dipping in relation to the more complex tasks. The mainly blind subjects managed to overcome Fraiberg's "conceptual problem"--i.e., they acquired the ability to attribute an external object with identity and substance even when it manifested its presence through sound only--and thus developed the ability to reach an object presented through sound. Instead, most of the blind children with multiple disabilities presented poor performances on the "reach on sound" protocol and were unable, before 36 months of age, to develop the strategies needed to resolve Fraiberg's "conceptual problem". Copyright © 2011 Elsevier Ltd. All rights reserved.

Fuel Aging in Storage and Transportation (FAST): Accelerated Characterization and Performance Assessment of the Used Nuclear Fuel Storage System

DOE Office of Scientific and Technical Information (OSTI.GOV)

McDeavitt, Sean

2016-08-02

This Integrated Research Project (IRP) was established to characterize key limiting phenomena related to the performance of used nuclear fuel (UNF) storage systems. This was an applied engineering project with a specific application in view (i.e., UNF dry storage). The completed tasks made use of a mixture of basic science and engineering methods. The overall objective was to create, or enable the creation of, predictive tools in the form of observation methods, phenomenological models, and databases that will enable the design, installation, and licensing of dry UNF storage systems that will be capable of containing UNF for extended period ofmore » time.« less

Glenn Goddard TDRSS Waveform 1.1.3 On-Orbit Performance Report

NASA Technical Reports Server (NTRS)

Chelmins, David T.

2014-01-01

The objective of the Space Communications and Navigation (SCaN) Testbed is to study the development, testing, and operation of software defined radios (SDRs) and their associated appliations in the operational space environment to reduce cost and risk for future space missions. This report covers the results of on-orbit performance testing completed using the Glenn Goddard Tracking and Data Relay Satellite System (TDRSS) waveform version 1.1.3 in the ground and space environments. The Glenn Goddard TDRSS (GGT) waveform, operating on the SCaN Testbed Jet Propulsion Laboratory (JPL) SDR, is capable of a variety of data rates and frequencies, operating using Binary Phase Shift Keying (BPSK).

High Efficiency Centrifugal Compressor for Rotorcraft Applications

NASA Technical Reports Server (NTRS)

Medic, Gorazd; Sharma, Om P.; Jongwook, Joo; Hardin, Larry W.; McCormick, Duane C.; Cousins, William T.; Lurie, Elizabeth A.; Shabbir, Aamir; Holley, Brian M.; Van Slooten, Paul R.

2017-01-01

A centrifugal compressor research effort conducted by United Technologies Research Center under NASA Research Announcement NNC08CB03C is documented. The objectives were to identify key technical barriers to advancing the aerodynamic performance of high-efficiency, high work factor, compact centrifugal compressor aft-stages for turboshaft engines; to acquire measurements needed to overcome the technical barriers and inform future designs; to design, fabricate, and test a new research compressor in which to acquire the requisite flow field data. A new High-Efficiency Centrifugal Compressor stage -- splittered impeller, splittered diffuser, 90 degree bend, and exit guide vanes -- with aerodynamically aggressive performance and configuration (compactness) goals were designed, fabricated, and subquently tested at the NASA Glenn Research Center.

NASA Electronic Library System (NELS) database schema, version 1.2

NASA Technical Reports Server (NTRS)

Melebeck, Clovis J.

1991-01-01

The database tables used by NELS version 1.2 are discussed. To provide the current functional capability offered by NELS, nineteen tables were created with ORACLE. Each table lists the ORACLE table name and provides a brief description of the tables intended use or function. The following sections cover four basic categories of tables: NELS object classes, NELS collections, NELS objects, and NELS supplemental tables. Also included in each section is a definition and/or relationship of each field to other fields or tables. The primary key(s) for each table is indicated with a single asterisk (*), while foreign keys are indicated with double asterisks (**). The primary key(s) indicate the key(s) which uniquely identifies a record for that table. The foreign key(s) is used to identify additional information in other table(s) for that record. The two appendices are the command which is used to construct the ORACLE tables for NELS. Appendix A contains the commands which create the tables which are defined in the following sections. Appendix B contains the commands which build the indices for these tables.

Security Analysis and Improvements to the PsychoPass Method

PubMed Central

2013-01-01

Background In a recent paper, Pietro Cipresso et al proposed the PsychoPass method, a simple way to create strong passwords that are easy to remember. However, the method has some security issues that need to be addressed. Objective To perform a security analysis on the PsychoPass method and outline the limitations of and possible improvements to the method. Methods We used the brute force analysis and dictionary attack analysis of the PsychoPass method to outline its weaknesses. Results The first issue with the Psychopass method is that it requires the password reproduction on the same keyboard layout as was used to generate the password. The second issue is a security weakness: although the produced password is 24 characters long, the password is still weak. We elaborate on the weakness and propose a solution that produces strong passwords. The proposed version first requires the use of the SHIFT and ALT-GR keys in combination with other keys, and second, the keys need to be 1-2 distances apart. Conclusions The proposed improved PsychoPass method yields passwords that can be broken only in hundreds of years based on current computing powers. The proposed PsychoPass method requires 10 keys, as opposed to 20 keys in the original method, for comparable password strength. PMID:23942458

Design and implementation of a smart card based healthcare information system.

PubMed

Kardas, Geylani; Tunali, E Turhan

2006-01-01

Smart cards are used in information technologies as portable integrated devices with data storage and data processing capabilities. As in other fields, smart card use in health systems became popular due to their increased capacity and performance. Their efficient use with easy and fast data access facilities leads to implementation particularly widespread in security systems. In this paper, a smart card based healthcare information system is developed. The system uses smart card for personal identification and transfer of health data and provides data communication via a distributed protocol which is particularly developed for this study. Two smart card software modules are implemented that run on patient and healthcare professional smart cards, respectively. In addition to personal information, general health information about the patient is also loaded to patient smart card. Health care providers use their own smart cards to be authenticated on the system and to access data on patient cards. Encryption keys and digital signature keys stored on smart cards of the system are used for secure and authenticated data communication between clients and database servers over distributed object protocol. System is developed on Java platform by using object oriented architecture and design patterns.

The COSPIX Mission: Focusing on the Energetic and Obscured Universe

NASA Technical Reports Server (NTRS)

Ferrando, P.; Goldwurm, A.; Laurent, P.; Limousin, O.; Beckmann, V; Arnaud, M.; Barcons, X.; Bomans, D.; Caballero, I.; Carrera, F.;

Getting a grip on reality: Grasping movements directed to real objects and images rely on dissociable neural representations.

PubMed

Freud, Erez; Macdonald, Scott N; Chen, Juan; Quinlan, Derek J; Goodale, Melvyn A; Culham, Jody C

2018-01-01

In the current era of touchscreen technology, humans commonly execute visually guided actions directed to two-dimensional (2D) images of objects. Although real, three-dimensional (3D), objects and images of the same objects share high degree of visual similarity, they differ fundamentally in the actions that can be performed on them. Indeed, previous behavioral studies have suggested that simulated grasping of images relies on different representations than actual grasping of real 3D objects. Yet the neural underpinnings of this phenomena have not been investigated. Here we used functional magnetic resonance imaging (fMRI) to investigate how brain activation patterns differed for grasping and reaching actions directed toward real 3D objects compared to images. Multivoxel Pattern Analysis (MVPA) revealed that the left anterior intraparietal sulcus (aIPS), a key region for visually guided grasping, discriminates between both the format in which objects were presented (real/image) and the motor task performed on them (grasping/reaching). Interestingly, during action planning, the representations of real 3D objects versus images differed more for grasping movements than reaching movements, likely because grasping real 3D objects involves fine-grained planning and anticipation of the consequences of a real interaction. Importantly, this dissociation was evident in the planning phase, before movement initiation, and was not found in any other regions, including motor and somatosensory cortices. This suggests that the dissociable representations in the left aIPS were not based on haptic, motor or proprioceptive feedback. Together, these findings provide novel evidence that actions, particularly grasping, are affected by the realness of the target objects during planning, perhaps because real targets require a more elaborate forward model based on visual cues to predict the consequences of real manipulation. Copyright © 2017 Elsevier Ltd. All rights reserved.

Music performance and the perception of key.

PubMed

Thompson, W F; Cuddy, L L

1997-02-01

The effect of music performance on perceived key movement was examined. Listeners judged key movement in sequences presented without performance expression (mechanical) in Experiment 1 and with performance expression in Experiment 2. Modulation distance varied. Judgments corresponded to predictions based on the cycle of fifths and toroidal models of key relatedness, with the highest correspondence for performed versions with the toroidal model. In Experiment 3, listeners compared mechanical sequences with either performed sequences or modifications of performed sequences. Modifications preserved expressive differences between chords, but not between voices. Predictions from Experiments 1 and 2 held only for performed sequences, suggesting that differences between voices are informative of key movement. Experiment 4 confirmed that modifications did not disrupt musicality. Analyses of performances further suggested a link between performance expression and key.

Computational multiobjective topology optimization of silicon anode structures for lithium-ion batteries

NASA Astrophysics Data System (ADS)

Mitchell, Sarah L.; Ortiz, Michael

2016-09-01

This study utilizes computational topology optimization methods for the systematic design of optimal multifunctional silicon anode structures for lithium-ion batteries. In order to develop next generation high performance lithium-ion batteries, key design challenges relating to the silicon anode structure must be addressed, namely the lithiation-induced mechanical degradation and the low intrinsic electrical conductivity of silicon. As such this work considers two design objectives, the first being minimum compliance under design dependent volume expansion, and the second maximum electrical conduction through the structure, both of which are subject to a constraint on material volume. Density-based topology optimization methods are employed in conjunction with regularization techniques, a continuation scheme, and mathematical programming methods. The objectives are first considered individually, during which the influence of the minimum structural feature size and prescribed volume fraction are investigated. The methodology is subsequently extended to a bi-objective formulation to simultaneously address both the structural and conduction design criteria. The weighted sum method is used to derive the Pareto fronts, which demonstrate a clear trade-off between the competing design objectives. A rigid frame structure was found to be an excellent compromise between the structural and conduction design criteria, providing both the required structural rigidity and direct conduction pathways. The developments and results presented in this work provide a foundation for the informed design and development of silicon anode structures for high performance lithium-ion batteries.

A novel performance monitoring framework for health research systems: experiences of the National Institute for Health Research in England

PubMed Central

2011-01-01

Background The National Institute for Health Research (NIHR) was established in 2006 with the aim of creating an applied health research system embedded within the English National Health Service (NHS). NIHR sought to implement an approach for monitoring its performance that effectively linked early indicators of performance with longer-term research impacts. We attempted to develop and apply a conceptual framework for defining appropriate key performance indicators for NIHR. Method Following a review of relevant literature, a conceptual framework for defining performance indicators for NIHR was developed, based on a hybridisation of the logic model and balanced scorecard approaches. This framework was validated through interviews with key NIHR stakeholders and a pilot in one division of NIHR, before being refined and applied more widely. Indicators were then selected and aggregated to create a basket of indicators aligned to NIHR's strategic goals, which could be reported to NIHR's leadership team on a quarterly basis via an oversight dashboard. Results Senior health research system managers and practitioners endorsed the conceptual framework developed and reported satisfaction with the breadth and balance of indicators selected for reporting. Conclusions The use of the hybrid conceptual framework provides a pragmatic approach to defining performance indicators that are aligned to the strategic aims of a health research system. The particular strength of this framework is its capacity to provide an empirical link, over time, between upstream activities of a health research system and its long-term strategic objectives. PMID:21435265

Assessing the performance of mental health service facilities for meeting patient priorities and health service responsiveness.

PubMed

Bramesfeld, A; Stegbauer, C

2016-10-01

The World Health Organisation has defined health service responsiveness as one of the key-objectives of health systems. Health service responsiveness relates to the ability to respond to service users' legitimate expectations on non-medical issues when coming into contact with the services of a healthcare system. It is defined by the areas showing respect for persons and patient orientation. Health service responsiveness is particularly relevant to mental health services, due to the specific vulnerability of mental health patients but also because it matches what mental health patients consider as good quality of care as well as their priorities when seeking healthcare. As (mental) health service responsiveness applies equally to all concerned services it would be suitable as a universal indicator for the quality of services' performance. However, performance monitoring programs in mental healthcare rarely assess health service performance with respect to meeting patient priorities. This is in part due of patient priorities as an outcome being underrepresented in studies that evaluate service provision. The lack of studies using patient priorities as outcomes transmits into evidence based guidelines and subsequently, into underrepresentation of patient priorities in performance monitoring. Possible ways out of this situation include more intervention studies using patient priorities as outcome, considering evidence from qualitative studies in guideline development and developing performance monitoring programs along the patient pathway and on key-points of relevance for service quality from a patient perspective.

Design of price incentives for adjunct policy goals in formula funding for hospitals and health services

PubMed Central

Duckett, Stephen J

2008-01-01

Background Hospital policy involves multiple objectives: efficiency of service delivery, pursuit of high quality care, promoting access. Funding policy based on hospital casemix has traditionally been considered to be only about promoting efficiency. Discussion Formula-based funding policy can be (and has been) used to pursue a range of policy objectives, not only efficiency. These are termed 'adjunct' goals. Strategies to incorporate adjunct goals into funding design must, implicitly or explicitly, address key decision choices outlined in this paper. Summary Policy must be clear and explicit about the behaviour to be rewarded; incentives must be designed so that all facilities with an opportunity to improve have an opportunity to benefit; the reward structure is stable and meaningful; and the funder monitors performance and gaming. PMID:18384694

Binding Objects to Locations: The Relationship between Object Files and Visual Working Memory

ERIC Educational Resources Information Center

Hollingworth, Andrew; Rasmussen, Ian P.

2010-01-01

The relationship between object files and visual working memory (VWM) was investigated in a new paradigm combining features of traditional VWM experiments (color change detection) and object-file experiments (memory for the properties of moving objects). Object-file theory was found to account for a key component of object-position binding in VWM:…

Dynamic Metasurface Aperture as Smart Around-the-Corner Motion Detector.

PubMed

Del Hougne, Philipp; F Imani, Mohammadreza; Sleasman, Timothy; Gollub, Jonah N; Fink, Mathias; Lerosey, Geoffroy; Smith, David R

2018-04-25

Detecting and analysing motion is a key feature of Smart Homes and the connected sensor vision they embrace. At present, most motion sensors operate in line-of-sight Doppler shift schemes. Here, we propose an alternative approach suitable for indoor environments, which effectively constitute disordered cavities for radio frequency (RF) waves; we exploit the fundamental sensitivity of modes of such cavities to perturbations, caused here by moving objects. We establish experimentally three key features of our proposed system: (i) ability to capture the temporal variations of motion and discern information such as periodicity ("smart"), (ii) non line-of-sight motion detection, and (iii) single-frequency operation. Moreover, we explain theoretically and demonstrate experimentally that the use of dynamic metasurface apertures can substantially enhance the performance of RF motion detection. Potential applications include accurately detecting human presence and monitoring inhabitants' vital signs.

Quantifying kinematics of purposeful movements to real, imagined, or absent functional objects: implications for modelling trajectories for robot-assisted ADL tasks.

PubMed

Wisneski, Kimberly J; Johnson, Michelle J

2007-03-23

Robotic therapy is at the forefront of stroke rehabilitation. The Activities of Daily Living Exercise Robot (ADLER) was developed to improve carryover of gains after training by combining the benefits of Activities of Daily Living (ADL) training (motivation and functional task practice with real objects), with the benefits of robot mediated therapy (repeatability and reliability). In combining these two therapy techniques, we seek to develop a new model for trajectory generation that will support functional movements to real objects during robot training. We studied natural movements to real objects and report on how initial reaching movements are affected by real objects and how these movements deviate from the straight line paths predicted by the minimum jerk model, typically used to generate trajectories in robot training environments. We highlight key issues that to be considered in modelling natural trajectories. Movement data was collected as eight normal subjects completed ADLs such as drinking and eating. Three conditions were considered: object absent, imagined, and present. This data was compared to predicted trajectories generated from implementing the minimum jerk model. The deviations in both the plane of the table (XY) and the sagittal plane of torso (XZ) were examined for both reaches to a cup and to a spoon. Velocity profiles and curvature were also quantified for all trajectories. We hypothesized that movements performed with functional task constraints and objects would deviate from the minimum jerk trajectory model more than those performed under imaginary or object absent conditions. Trajectory deviations from the predicted minimum jerk model for these reaches were shown to depend on three variables: object presence, object orientation, and plane of movement. When subjects completed the cup reach their movements were more curved than for the spoon reach. The object present condition for the cup reach showed more curvature than in the object imagined and absent conditions. Curvature in the XZ plane of movement was greater than curvature in the XY plane for all movements. The implemented minimum jerk trajectory model was not adequate for generating functional trajectories for these ADLs. The deviations caused by object affordance and functional task constraints must be accounted for in order to allow subjects to perform functional task training in robotic therapy environments. The major differences that we have highlighted include trajectory dependence on: object presence, object orientation, and the plane of movement. With the ability to practice ADLs on the ADLER environment we hope to provide patients with a therapy paradigm that will produce optimal results and recovery.

A spatiotemporal decomposition strategy for personal home video management

NASA Astrophysics Data System (ADS)

Yi, Haoran; Kozintsev, Igor; Polito, Marzia; Wu, Yi; Bouguet, Jean-Yves; Nefian, Ara; Dulong, Carole

2007-01-01

With the advent and proliferation of low cost and high performance digital video recorder devices, an increasing number of personal home video clips are recorded and stored by the consumers. Compared to image data, video data is lager in size and richer in multimedia content. Efficient access to video content is expected to be more challenging than image mining. Previously, we have developed a content-based image retrieval system and the benchmarking framework for personal images. In this paper, we extend our personal image retrieval system to include personal home video clips. A possible initial solution to video mining is to represent video clips by a set of key frames extracted from them thus converting the problem into an image search one. Here we report that a careful selection of key frames may improve the retrieval accuracy. However, because video also has temporal dimension, its key frame representation is inherently limited. The use of temporal information can give us better representation for video content at semantic object and concept levels than image-only based representation. In this paper we propose a bottom-up framework to combine interest point tracking, image segmentation and motion-shape factorization to decompose the video into spatiotemporal regions. We show an example application of activity concept detection using the trajectories extracted from the spatio-temporal regions. The proposed approach shows good potential for concise representation and indexing of objects and their motion in real-life consumer video.

Space rescue system definition (system performance analysis and trades)

NASA Astrophysics Data System (ADS)

Housten, Sam; Elsner, Tim; Redler, Ken; Svendsen, Hal; Wenzel, Sheri

This paper addresses key technical issues involved in the system definition of the Assured Crew Return Vehicle (ACRV). The perspective on these issues is that of a prospective ACRV contractor, performing system analysis and trade studies. The objective of these analyses and trade studies is to develop the recovery vehicle system concept and top level requirements. The starting point for this work is the definition of the set of design missions for the ACRV. This set of missions encompasses three classes of contingency/emergency (crew illness/injury, space station catastrophe/failure, transportation element catastrophe/failure). The need is to provide a system to return Space Station crew to Earth quickly (less than 24 hours) in response to randomly occurring contingency events over an extended period of time (30 years of planned Space Station life). The main topics addressed and characterized in this paper include the following: Key Recovery (Rescue) Site Access Considerations; Rescue Site Locations and Distribution; Vehicle Cross Range vs Site Access; On-orbit Loiter Capability and Vehicle Design; and Water vs. Land Recovery.

Application of Computational Intelligence to Improve Education in Smart Cities.

PubMed

Gomede, Everton; Gaffo, Fernando Henrique; Briganó, Gabriel Ulian; de Barros, Rodolfo Miranda; Mendes, Leonardo de Souza

2018-01-18

According to UNESCO, education is a fundamental human right and every nation's citizens should be granted universal access with equal quality to it. Because this goal is yet to be achieved in most countries, in particular in the developing and underdeveloped countries, it is extremely important to find more effective ways to improve education. This paper presents a model based on the application of computational intelligence (data mining and data science) that leads to the development of the student's knowledge profile and that can help educators in their decision making for best orienting their students. This model also tries to establish key performance indicators to monitor objectives' achievement within individual strategic planning assembled for each student. The model uses random forest for classification and prediction, graph description for data structure visualization and recommendation systems to present relevant information to stakeholders. The results presented were built based on the real dataset obtained from a Brazilian private k-9 (elementary school). The obtained results include correlations among key data, a model to predict student performance and recommendations that were generated for the stakeholders.

A Survey of Managers' Access to Key Performance Indicators via HIS: The Case of Iranian Teaching Hospitals.

PubMed

Ahmadi, Maryam; Khorrami, Farid; Dehnad, Afsaneh; Golchin, Mohammad H; Azad, Mohsen; Rahimi, Shafei

2018-01-01

The challenges of using health information systems in developing countries are different from developed countries for various reasons such as infrastructure and data culture of organizations. The aim of this study is to assess managers' access to key performance indicators (KPI) via Hospital Information System (HIS) in teaching hospitals of Iran. All managers (Census method) of the four teaching hospitals affiliated to Hormozgan University of Medical Sciences (HUMS) were included in this study. KPIs which are linked to the strategic objectives of organizations were adopted from the strategic plan of HUMS. The questionnaire used in this study included three categories: Financial, Human Resources and clinical. One-sample t-test was used and the significant difference score was calculated for the acceptable level. We found that HIS cannot facilitate access to KPIs for managers in the main categories, but it was effective in two subcategories of income (p = 0.314) and salary (P = 0.289)). A study of barriers to the use of managers of HIS in hospitals is suggested.

[Development of nursing key performance indicators for an intensive care unit by using a balanced scorecard].

PubMed

Choi, Yun Jeong; Lim, Ji Young; Lee, Young Whee; Kim, Hwa Soon

2008-10-01

The purpose of this study was to develop visions of nursing service, nursing strategies and key performance indicators (KPIs) for an intensive care unit (ICU) based on a Balanced Scorecard (BSC). This study was undertaken by using methodological research. The development process consisted of four phases; the first phase was to develop the vision of nursing in ICUs. The second phase was to develop strategies according to 4 perspectives of a BSC. The third phase was to develop KPIs according to the 4 perspectives of BSC and the final phase was to combine the nursing visions, strategies and KPIs of ICUs. Two main visions of nursing service for ICUs were established. These were 'realization of harmonized professional nursing with human respect' and 'recovery of health through specialized nursing' respectively. In order to reach the aim of developing nursing visions, thirteen practical strategies and nineteen KPIs were developed by four perspectives of the BSC. The results will be used as objective fundamental data to attain business outcomes for the achievement of nursing visions and strategies of ICUs.

In-vitro antimicrobial activity of marine actinobacteria against multidrug resistance Staphylococcus aureus

PubMed Central

Sathish, Kumar SR; Kokati, Venkata Bhaskara Rao

2012-01-01

Objective To investigate the antibacterial activity of marine actinobacteria against multidrug resistance Staphylococcus aureus (MDRSA). Methods Fifty one actinobacterial strains were isolated from salt pans soil, costal area in Kothapattanam, Ongole, Andhra Pradesh. Primary screening was done using cross-streak method against MDRSA. The bioactive compounds are extracted from efficient actinobacteria using solvent extraction. The antimicrobial activity of crude and solvent extracts was performed using Kirby-Bauer method. MIC for ethyl acetate extract was determined by modified agar well diffusion method. The potent actinobacteria are identified using Nonomura key, Shirling and Gottlieb 1966 with Bergey's manual of determinative bacteriology. Results Among the fifty one isolates screened for antibacterial activity, SRB25 were found efficient against MDRSA. The ethyl acetate extracts showed high inhibition against test organism. MIC test was performed with the ethyl acetate extract against MDRSA and found to be 1 000 µg/mL. The isolated actinobacteria are identified as Streptomyces sp with the help of Nonomura key. Conclusions The current investigation reveals that the marine actinobacteria from salt pan environment can be able to produce new drug molecules against drug resistant microorganisms. PMID:23569848

Living Labs: overview of ecological approaches for health promotion and rehabilitation.

PubMed

Korman, M; Weiss, P L; Kizony, R

2016-01-01

The term "Living Lab" was coined to reflect the use of sensors to monitor human behavior in real life environments. Until recently such measurements had been feasible only within experimental laboratory settings. The objective of this paper is to highlight research on health care sensing and monitoring devices that enable direct, objective and accurate capture of real-world functioning. Selected articles exemplifying the key technologies that allow monitoring of the motor-cognitive activity of persons with disabilities during naturally occurring daily experiences in real-life settings are discussed in terms of (1) the ways in which the Living Lab approach has been used to date, (2) limitations related to clinical assessment in rehabilitation settings and (3) three categories of the instruments most commonly used for this purpose: personal technologies, ambient technologies and external assistive systems. Technology's most important influences on clinical practice and rehabilitation are in a shift from laboratory-based to field-centered research and a transition between in-clinic performance to daily life activities. Numerous applications show its potential for real-time clinical assessment. Current technological solutions that may provide clinicians with objective, unobtrusive measurements of health and function, as well as tools that support rehabilitation on an individual basis in natural environments provide an important asset to standard clinical measures. Until recently objective clinical assessment could not be readily performed in a client's daily functional environment. Novel technologies enable health care sensing and monitoring devices that enable direct, objective and accurate capture of real-world functioning. Such technologies are referred to as a "Living Lab" approach since they enable the capture of objective and non-obtrusive data that clinicians can use to assess performance. Research and development in this field help clinicians support maintain independence and quality of life for people who have disabilities or who are aging, and to promote more effective methods of long-term rehabilitation and maintenance of a healthy life style.

Modelling Tradeoffs Evolution in Multipurpose Water Systems Operation in Response to Extreme Events

NASA Astrophysics Data System (ADS)

Mason, E.; Gazzotti, P.; Amigoni, F.; Giuliani, M.; Castelletti, A.

2015-12-01

Multipurpose water resource systems are usually operated on a tradeoff of the operating objectives, which - under steady state climatic and socio-economic boundary conditions - is supposed to ensure a fair and/or efficient balance among the conflicting interests. Extreme variability in the system's drivers might affect operators' risk aversion and force a change in the tradeoff. Properly accounting for these shifts is key to any rigorous retrospective assessment of operators' behavior and the associated system's performance. In this study, we explore how the selection of different optimal tradeoffs among the operating objectives is linked to the variations of the boundary conditions, such as, for example, drifting rainfall season or remarkable changes in crop and energy prices. We argue that tradeoff selection is driven by recent, extreme variations in system performance: underperforming on one of the operating objective target value should push the tradeoff toward the disadvantaged objective. To test this assumption, we developed a rational procedure to simulate the operators' tradeoff selection process. We map the selection onto a multi lateral negotiation process, where different multiple, virtual agents optimize different operating objectives. The agents periodically negotiate a compromise on the operating policy. The agent's rigidity in each negotiation round is determined by the recent system performances according to the specific objective it represents. The negotiation follows a set-based egocentric monotonic concession protocol: at each negotiation step an agent incrementally adds some options to the set of its acceptable compromises and (possibly) accepts lower and lower satisfying policies until an agreement is achieved. We apply this reiterated negotiation framework on the regulated Lake Como, Italy, simulating the lake dam operation and its recurrent updates over the last 50 years. The operation aims to balance shoreline flood prevention and irrigation deficit control in the downstream irrigated areas. The results of our simulated negotiations are able to accurately capture the operator's risk aversion changes as driven by extreme wet and dry situations, and to well reproduce the observational release data.

Motor learning from virtual reality to natural environments in individuals with Duchenne muscular dystrophy.

PubMed

Quadrado, Virgínia Helena; Silva, Talita Dias da; Favero, Francis Meire; Tonks, James; Massetti, Thais; Monteiro, Carlos Bandeira de Mello

2017-11-10

To examine whether performance improvements in the virtual environment generalize to the natural environment. we had 64 individuals, 32 of which were individuals with DMD and 32 were typically developing individuals. The groups practiced two coincidence timing tasks. In the more tangible button-press task, the individuals were required to 'intercept' a falling virtual object at the moment it reached the interception point by pressing a key on the computer. In the more abstract task, they were instructed to 'intercept' the virtual object by making a hand movement in a virtual environment using a webcam. For individuals with DMD, conducting a coincidence timing task in a virtual environment facilitated transfer to the real environment. However, we emphasize that a task practiced in a virtual environment should have higher rates of difficulties than a task practiced in a real environment. IMPLICATIONS FOR REHABILITATION Virtual environments can be used to promote improved performance in ?real-world? environments. Virtual environments offer the opportunity to create paradigms similar ?real-life? tasks, however task complexity and difficulty levels can be manipulated, graded and enhanced to increase likelihood of success in transfer of learning and performance. Individuals with DMD, in particular, showed immediate performance benefits after using virtual reality.

The Mediating Effect of Innovation between Total Quality Management (TQM) and Business Performance

NASA Astrophysics Data System (ADS)

Shan, Ang Wei; Fauzi Ahmad, Mohd; Hisyamudin Muhd Nor, Nik

2016-11-01

Both TQM and Innovation are the competitive key factors that intensely embedded into organizational products, service and process. In order to achieve higher business performance, organizations are needed to adopt both quality and innovation. Therefore, the main objective of this paper is to identify the relationship between TQM and business performance with a mediator's effect of Innovation. After detailed review the extensive literature, a new TQM model is presented. The proposed model integrates the TQM practices and different type of innovation attempt to develop a theoretical knowledge to help academician and manufacturer to understand the relationship that design quality in product and service and engaging innovation in the activities. To this end, the SEM-PLS (Structural Equation Modelling - Partial Least Squares Structural) is used to identify and evaluate the relationship among TQM, Innovation and business performance in establishing a new TQM model.

Word-to-picture recognition is a function of motor components mappings at the stage of retrieval.

PubMed

Brouillet, Denis; Brouillet, Thibaut; Milhau, Audrey; Heurley, Loïc; Vagnot, Caroline; Brunel, Lionel

2016-10-01

Embodied approaches of cognition argue that retrieval involves the re-enactment of both sensory and motor components of the desired remembering. In this study, we investigated the effect of motor action performed to produce the response in a recognition task when this action is compatible with the affordance of the objects that have to be recognised. In our experiment, participants were first asked to learn a list of words referring to graspable objects, and then told to make recognition judgements on pictures. The pictures represented objects where the graspable part was either pointing to the same or to the opposite side of the "Yes" response key. Results show a robust effect of compatibility between objects affordance and response hand. Moreover, this compatibility improves participants' ability of discrimination, suggesting that motor components are relevant cue for memory judgement at the stage of retrieval in a recognition task. More broadly, our data highlight that memory judgements are a function of motor components mappings at the stage of retrieval. © 2015 International Union of Psychological Science.

Constrained non-linear multi-objective optimisation of preventive maintenance scheduling for offshore wind farms

NASA Astrophysics Data System (ADS)

Zhong, Shuya; Pantelous, Athanasios A.; Beer, Michael; Zhou, Jian

2018-05-01

Offshore wind farm is an emerging source of renewable energy, which has been shown to have tremendous potential in recent years. In this blooming area, a key challenge is that the preventive maintenance of offshore turbines should be scheduled reasonably to satisfy the power supply without failure. In this direction, two significant goals should be considered simultaneously as a trade-off. One is to maximise the system reliability and the other is to minimise the maintenance related cost. Thus, a non-linear multi-objective programming model is proposed including two newly defined objectives with thirteen families of constraints suitable for the preventive maintenance of offshore wind farms. In order to solve our model effectively, the nondominated sorting genetic algorithm II, especially for the multi-objective optimisation is utilised and Pareto-optimal solutions of schedules can be obtained to offer adequate support to decision-makers. Finally, an example is given to illustrate the performances of the devised model and algorithm, and explore the relationships of the two targets with the help of a contrast model.

Laboratory- and field-based testing as predictors of skating performance in competitive-level female ice hockey

PubMed Central

Henriksson, Tommy; Vescovi, Jason D; Fjellman-Wiklund, Anncristine; Gilenstam, Kajsa

2016-01-01

Objectives The purpose of this study was to examine whether field-based and/or laboratory-based assessments are valid tools for predicting key performance characteristics of skating in competitive-level female hockey players. Design Cross-sectional study. Methods Twenty-three female ice hockey players aged 15–25 years (body mass: 66.1±6.3 kg; height: 169.5±5.5 cm), with 10.6±3.2 years playing experience volunteered to participate in the study. The field-based assessments included 20 m sprint, squat jump, countermovement jump, 30-second repeated jump test, standing long jump, single-leg standing long jump, 20 m shuttle run test, isometric leg pull, one-repetition maximum bench press, and one-repetition maximum squats. The laboratory-based assessments included body composition (dual energy X-ray absorptiometry), maximal aerobic power, and isokinetic strength (Biodex). The on-ice tests included agility cornering s-turn, cone agility skate, transition agility skate, and modified repeat skate sprint. Data were analyzed using stepwise multivariate linear regression analysis. Linear regression analysis was used to establish the relationship between key performance characteristics of skating and the predictor variables. Results Regression models (adj R2) for the on-ice variables ranged from 0.244 to 0.663 for the field-based assessments and from 0.136 to 0.420 for the laboratory-based assessments. Single-leg tests were the strongest predictors for key performance characteristics of skating. Single leg standing long jump alone explained 57.1%, 38.1%, and 29.1% of the variance in skating time during transition agility skate, agility cornering s-turn, and modified repeat skate sprint, respectively. Isokinetic peak torque in the quadriceps at 90° explained 42.0% and 32.2% of the variance in skating time during agility cornering s-turn and modified repeat skate sprint, respectively. Conclusion Field-based assessments, particularly single-leg tests, are an adequate substitute to more expensive and time-consuming laboratory assessments if the purpose is to gain knowledge about key performance characteristics of skating. PMID:27574474

The role of executive attention in object substitution masking.

PubMed

Filmer, Hannah L; Wells-Peris, Roxanne; Dux, Paul E

2017-05-01

It was long thought that a key characteristic of object substitution masking (OSM) was the requirement for spatial attention to be dispersed for the mask to impact visual sensitivity. However, recent studies have provided evidence questioning whether spatial attention interacts with OSM magnitude, suggesting that the previous reports reflect the impact of performance being at ceiling for the low attention load conditions. Another technique that has been employed to modulate attention in OSM paradigms involves presenting the target stimulus foveally, but with another demanding task shown immediately prior, and thus taxing executive/temporal attention. Under such conditions, when the two tasks occur in close temporal proximity relatively to greater temporal separation, masking is increased. However this effect could also be influenced by performance being at ceiling in some conditions. Here, we manipulated executive attention for a foveated target using a dual-task paradigm. Critically, ceiling performance was avoided by thresholding the target stimulus prior to it being presented under OSM conditions. We found no evidence for an interaction between executive attention load and masking. Collectively, along with the previous findings, our results provide compelling evidence that OSM as a phenomenon occurs independently of attention.

A Deep Denoising Autoencoder Approach to Improving the Intelligibility of Vocoded Speech in Cochlear Implant Simulation.

PubMed

Lai, Ying-Hui; Chen, Fei; Wang, Syu-Siang; Lu, Xugang; Tsao, Yu; Lee, Chin-Hui

2017-07-01

In a cochlear implant (CI) speech processor, noise reduction (NR) is a critical component for enabling CI users to attain improved speech perception under noisy conditions. Identifying an effective NR approach has long been a key topic in CI research. Recently, a deep denoising autoencoder (DDAE) based NR approach was proposed and shown to be effective in restoring clean speech from noisy observations. It was also shown that DDAE could provide better performance than several existing NR methods in standardized objective evaluations. Following this success with normal speech, this paper further investigated the performance of DDAE-based NR to improve the intelligibility of envelope-based vocoded speech, which simulates speech signal processing in existing CI devices. We compared the performance of speech intelligibility between DDAE-based NR and conventional single-microphone NR approaches using the noise vocoder simulation. The results of both objective evaluations and listening test showed that, under the conditions of nonstationary noise distortion, DDAE-based NR yielded higher intelligibility scores than conventional NR approaches. This study confirmed that DDAE-based NR could potentially be integrated into a CI processor to provide more benefits to CI users under noisy conditions.

Space Technology Game Changing Development Astrobee: ISS Robotic Free Flyer

NASA Technical Reports Server (NTRS)

Bualat, Maria Gabriele

2015-01-01

Astrobee will be a free-flying robot that can be remotely operated by astronauts in space or by mission controllers on the ground. NASA is developing Astrobee to perform a variety of intravehicular activities (IVA), such as operations inside the International Space Station. These IVA tasks include interior environmental surveys (e.g., sound level measurement), inventory and mobile camera work. Astrobee will also serve as a platform for robotics research in microgravity. Here we describe the Astrobee project objectives, concept of operations, development approach, key challenges, and initial design.

Rotorcraft flight-propulsion control integration

NASA Technical Reports Server (NTRS)

Mihaloew, James R.; Ballin, Mark G.; Ruttledge, D. G. C.

1988-01-01

The NASA Ames and Lewis Research Centers, in conjunction with the Army Research and Technology Laboratories have initiated and completed, in part, a joint research program focused on improving the performance, maneuverability, and operating characteristics of rotorcraft by integrating the flight and propulsion controls. The background of the program, its supporting programs, its goals and objectives, and an approach to accomplish them are discussed. Results of the modern control governor design of the T700 and the Rotorcraft Integrated Flight-Propulsion Control Study, which were key elements of the program, are also presented.

A market survey of geothermal wellhead power generation systems

NASA Technical Reports Server (NTRS)

Leeds, M. W.

1978-01-01

The market potential for a portable geothermal wellhead power conversion device is assessed. Major study objectives included identifying the most promising applications for such a system, the potential impediments confronting their industrialization, and the various government actions needed to overcome these impediments. The heart of the study was a series of structured interviews with key decision-making individual in the various disciplines of the geothermal community. In addition, some technical and economic analyses of a candidate system were performed to support the feasibility of the basic concept.

Fast track lunar NTR systems assessment for the First Lunar Outpost and its evolvability to Mars

NASA Technical Reports Server (NTRS)

Borowski, Stanley K.; Alexander, Stephen W.

1992-01-01

The objectives of the 'fast track' lunar Nuclear Thermal Rocket (NTR) analysis are to quantify necessary engine/stage characteristics to perform NASA's 'First Lunar Outpost' scenario and to assess the potential for evolution to Mars mission applications. By developing NTR/stage technologies for use in NASA's 'First Lunar Outpost' scenario, NASA will make a major down payment on the key components needed for the follow-on Mars Space Transportation System. A faster, cheaper approach to overall lunar/Mars exploration is expected.

Microwave and millimeter wave monolithic integrated circuits (MIMIC) program. MIMIC briefs: Summaries of phase 3 technology support programs

NASA Astrophysics Data System (ADS)

Kramer, Warner

1993-01-01

This publication contains technical and contractual summaries of the MIMIC program's Phase 3 technology support programs. Each project description includes a discussion of the objectives of the effort, the approach pursued, and recent progress. Also identified are the performing organization(s), principal investigator and/or other key personnel, contract number, program funding and duration, and program monitor/COTR. Concluding the document is a directory of the personnel associated with these projects, from whom more information may be requested.

Modeling Primary Atomization of Liquid Fuels using a Multiphase DNS/LES Approach

DOE Office of Scientific and Technical Information (OSTI.GOV)

Arienti, Marco; Oefelein, Joe; Doisneau, Francois

2016-08-01

As part of a Laboratory Directed Research and Development project, we are developing a modeling-and-simulation capability to study fuel direct injection in automotive engines. Predicting mixing and combustion at realistic conditions remains a challenging objective of energy science. And it is a research priority in Sandia’s mission-critical area of energy security, being also relevant to many flows in defense and climate. High-performance computing applied to this non-linear multi-scale problem is key to engine calculations with increased scientific reliability.

Wave Energy Prize - 1/20th Testing - CalWave Power Technologies

DOE Data Explorer

Scharmen, Wesley

2016-09-09

Data from the 1/20th scale testing data completed on the Wave Energy Prize for the CalWave Power Technologies team, including the 1/20th scale test plan, raw test data, video, photos, and data analysis results. The top level objective of the 1/20th scale device testing is to obtain the necessary measurements required for determining Average Climate Capture Width per Characteristic Capital Expenditure (ACE) and the Hydrodynamic Performance Quality (HPQ), key metrics for determining the Wave Energy Prize (WEP) winners.

Using Multi-Core Systems for Rover Autonomy

NASA Technical Reports Server (NTRS)

Clement, Brad; Estlin, Tara; Bornstein, Benjamin; Springer, Paul; Anderson, Robert C.

2010-01-01

Task Objectives are: (1) Develop and demonstrate key capabilities for rover long-range science operations using multi-core computing, (a) Adapt three rover technologies to execute on SOA multi-core processor (b) Illustrate performance improvements achieved (c) Demonstrate adapted capabilities with rover hardware, (2) Targeting three high-level autonomy technologies (a) Two for onboard data analysis (b) One for onboard command sequencing/planning, (3) Technologies identified as enabling for future missions, (4)Benefits will be measured along several metrics: (a) Execution time / Power requirements (b) Number of data products processed per unit time (c) Solution quality

Effective radiology dashboards: key research findings.

PubMed

Karami, Mahtab; Safdari, Reza; Rahimi, Azin

2013-01-01

Innovative organizations have access to information for business intelligence through the objectives displayed in dashboards. In healthcare organizations, where the goal is to improve quality of care along with reducing costs, the radiology department is important from both financial and clinical aspects. Therefore, how to manage this department has critical impact on the effectiveness and efficiency of the organization. Today, since the information in this department not only has different data structure but also is gathered from different data sources, a well defined, comprehensive dashboard can be an effective tool to enhance performance.

Personalized objects can optimize the diagnosis of EMCS in the assessment of functional object use in the CRS-R: a double blind, randomized clinical trial.

PubMed

Sun, Yuxiao; Wang, Jianan; Heine, Lizette; Huang, Wangshan; Wang, Jing; Hu, Nantu; Hu, Xiaohua; Fang, Xiaohui; Huang, Supeng; Laureys, Steven; Di, Haibo

2018-04-12

Behavioral assessment has been acted as the gold standard for the diagnosis of disorders of consciousness (DOC) patients. The item "Functional Object Use" in the motor function sub-scale in the Coma Recovery Scale-Revised (CRS-R) is a key item in differentiating between minimally conscious state (MCS) and emergence from MCS (EMCS). However, previous studies suggested that certain specific stimuli, especially something self-relevant can affect DOC patients' scores of behavioral assessment scale. So, we attempted to find out if personalized objects can improve the diagnosis of EMCS in the assessment of Functional Object Use by comparing the use of patients' favorite objects and other common objects in MCS patients. Twenty-one post-comatose patients diagnosed as MCS were prospectively included. The item "Functional Object Use" was assessed by using personalized objects (e.g., cigarette, paper) and non-personalized objects, which were presented in a random order. The rest assessments were performed following the standard protocol of the CRS-R. The differences between functional uses of the two types of objects were analyzed by the McNemar test. The incidence of Functional Object Use was significantly higher using personalized objects than non-personalized objects in the CRS-R. Five out of the 21 MCS studied patients, who were assessed with non-personalized objects, were re-diagnosed as EMCS with personalized objects (χ 2  = 5, df = 1, p < 0.05). Personalized objects employed here seem to be more effective to elicit patients' responses as compared to non-personalized objects during the assessment of Functional Object Use in DOC patients. Clinical Trials.gov: NCT02988206 ; Date of registration: 2016/12/12.

Understanding of Object Detection Based on CNN Family and YOLO

NASA Astrophysics Data System (ADS)

Du, Juan

2018-04-01

As a key use of image processing, object detection has boomed along with the unprecedented advancement of Convolutional Neural Network (CNN) and its variants since 2012. When CNN series develops to Faster Region with CNN (R-CNN), the Mean Average Precision (mAP) has reached 76.4, whereas, the Frame Per Second (FPS) of Faster R-CNN remains 5 to 18 which is far slower than the real-time effect. Thus, the most urgent requirement of object detection improvement is to accelerate the speed. Based on the general introduction to the background and the core solution CNN, this paper exhibits one of the best CNN representatives You Only Look Once (YOLO), which breaks through the CNN family’s tradition and innovates a complete new way of solving the object detection with most simple and high efficient way. Its fastest speed has achieved the exciting unparalleled result with FPS 155, and its mAP can also reach up to 78.6, both of which have surpassed the performance of Faster R-CNN greatly. Additionally, compared with the latest most advanced solution, YOLOv2 achieves an excellent tradeoff between speed and accuracy as well as an object detector with strong generalization ability to represent the whole image.

Low Activity Waste Pretreatment System Bench-Scale Testing: Supporting Integrated Testing and Facility Safety Analyses - 17171

DOE Office of Scientific and Technical Information (OSTI.GOV)

Schonewill, Philip P.; Russell, Renee L.; Daniel, Richard C.

The Low Activity Waste Pretreatment System (LAWPS) is being designed to enable the direct feed of waste to the Hanford Tank Waste Treatment and Immobilization Plant (WTP) Low Activity Waste (LAW) facility to be immobilized. Prior to construction of the LAWPS, pilot-scale integrated testing of the key unit operations (crossflow filtration, ion exchange using spherical resorcinol-formaldehyde (sRF) resin) will be conducted by a team led by Washington River Protection Solutions (WRPS) to increase the technology maturation level of the facility’s critical technology elements. As a part of this effort, Pacific Northwest National Laboratory (PNNL) has conducted a series of bench-scalemore » (or engineering-scale) tests to perform two major objectives: (1) support pilot-scale integrated testing of the LAWPS by supplying information or performance data in advance of operating the pilot-scale facility; and (2) collect data needed to establish or confirm assumptions/approaches planned for implementation in the LAWPS safety basis. The first objective was focused in two technical areas: developing simulants that are representative of expected waste feed and can be produced at larger scales, and using these simulants in a bench-scale crossflow filter to establish expected solid-liquid separation performance. The crossflow filter was also used to observe the efficacy (with respect to filter production rate) of selected operational strategies. The second objective also included two technical areas: measuring the effect of sRF resin on hydrogen generation rate under irradiation, and demonstrating that the planned hydrogen management approach is effective and robust. The hydrogen management strategy involves fluidization of the sRF resin bed in the ion exchange columns and recirculating the liquid, a scenario that is planned for testing at full column height. The full height tests at PNNL also supported full-scale IX column testing conducted as part of the technology maturation plan. The experimental approaches used at PNNL in these four technical areas are summarized and selected key preliminary results are provided.« less

Internet Performance Analysis of South Asian Countries Using End-to-End Internet Performance Measurements

DOE PAGES

Ali, Saqib; Wang, Guojun; Cottrell, Roger Leslie; ...

2018-05-28

Internet performance is highly correlated with key economic development metrics of a region. According to World Bank, the economic growth of a country increases 1.3% with a 10% increase in the speed of the Internet. Therefore, it is necessary to monitor and understand the performance of the Internet links in the region. It helps to figure out the infrastructural inefficiencies, poor resource allocation, and routing issues in the region. Moreover, it provides healthy suggestions for future upgrades. Therefore, the objective of this paper is to understand the Internet performance and routing infrastructure of South Asian countries in comparison to themore » developed world and neighboring countries using end-to-end Internet performance measurements. The South Asian countries comprise nearly 32% of the Internet users in Asia and nearly 16% of the world. The Internet performance metrics in the region are collected through the PingER framework. The framework is developed by the SLAC National Accelerator Laboratory, USA and is running for the last 20 years. PingER has 16 monitoring nodes in the region, and in the last year PingER monitors about 40 sites in South Asia using the ubiquitous ping facility. The collected data is used to estimate the key Internet performance metrics of South Asian countries. The performance metrics are compared with the neighboring countries and the developed world. Particularly, the TCP throughput of the countries is also correlated with different development indices. Further, worldwide Internet connectivity and routing patterns of the countries are investigated to figure out the inconsistencies in the region. Furthermore, the performance analysis revealed that the South Asia region is 7-10 years behind the developed regions of North America (USA and Canada), Europe, and East Asia.« less

Internet Performance Analysis of South Asian Countries Using End-to-End Internet Performance Measurements

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ali, Saqib; Wang, Guojun; Cottrell, Roger Leslie

Internet performance is highly correlated with key economic development metrics of a region. According to World Bank, the economic growth of a country increases 1.3% with a 10% increase in the speed of the Internet. Therefore, it is necessary to monitor and understand the performance of the Internet links in the region. It helps to figure out the infrastructural inefficiencies, poor resource allocation, and routing issues in the region. Moreover, it provides healthy suggestions for future upgrades. Therefore, the objective of this paper is to understand the Internet performance and routing infrastructure of South Asian countries in comparison to themore » developed world and neighboring countries using end-to-end Internet performance measurements. The South Asian countries comprise nearly 32% of the Internet users in Asia and nearly 16% of the world. The Internet performance metrics in the region are collected through the PingER framework. The framework is developed by the SLAC National Accelerator Laboratory, USA and is running for the last 20 years. PingER has 16 monitoring nodes in the region, and in the last year PingER monitors about 40 sites in South Asia using the ubiquitous ping facility. The collected data is used to estimate the key Internet performance metrics of South Asian countries. The performance metrics are compared with the neighboring countries and the developed world. Particularly, the TCP throughput of the countries is also correlated with different development indices. Further, worldwide Internet connectivity and routing patterns of the countries are investigated to figure out the inconsistencies in the region. Furthermore, the performance analysis revealed that the South Asia region is 7-10 years behind the developed regions of North America (USA and Canada), Europe, and East Asia.« less

Word Recall: Cognitive Performance Within Internet Surveys

PubMed Central

Craig, Benjamin M; Jim, Heather S

2015-01-01

Background The use of online surveys for data collection has increased exponentially, yet it is often unclear whether interview-based cognitive assessments (such as face-to-face or telephonic word recall tasks) can be adapted for use in application-based research settings. Objective The objective of the current study was to compare and characterize the results of online word recall tasks to those of the Health and Retirement Study (HRS) and determine the feasibility and reliability of incorporating word recall tasks into application-based cognitive assessments. Methods The results of the online immediate and delayed word recall assessment, included within the Women’s Health and Valuation (WHV) study, were compared to the results of the immediate and delayed recall tasks of Waves 5-11 (2000-2012) of the HRS. Results Performance on the WHV immediate and delayed tasks demonstrated strong concordance with performance on the HRS tasks (ρc=.79, 95% CI 0.67-0.91), despite significant differences between study populations (P<.001) and study design. Sociodemographic characteristics and self-reported memory demonstrated similar relationships with performance on both the HRS and WHV tasks. Conclusions The key finding of this study is that the HRS word recall tasks performed similarly when used as an online cognitive assessment in the WHV. Online administration of cognitive tests, which has the potential to significantly reduce participant and administrative burden, should be considered in future research studies and health assessments. PMID:26543924

The Dynamic Multisensory Engram: Neural Circuitry Underlying Crossmodal Object Recognition in Rats Changes with the Nature of Object Experience.

PubMed

Jacklin, Derek L; Cloke, Jacob M; Potvin, Alphonse; Garrett, Inara; Winters, Boyer D

2016-01-27

Rats, humans, and monkeys demonstrate robust crossmodal object recognition (CMOR), identifying objects across sensory modalities. We have shown that rats' performance of a spontaneous tactile-to-visual CMOR task requires functional integration of perirhinal (PRh) and posterior parietal (PPC) cortices, which seemingly provide visual and tactile object feature processing, respectively. However, research with primates has suggested that PRh is sufficient for multisensory object representation. We tested this hypothesis in rats using a modification of the CMOR task in which multimodal preexposure to the to-be-remembered objects significantly facilitates performance. In the original CMOR task, with no preexposure, reversible lesions of PRh or PPC produced patterns of impairment consistent with modality-specific contributions. Conversely, in the CMOR task with preexposure, PPC lesions had no effect, whereas PRh involvement was robust, proving necessary for phases of the task that did not require PRh activity when rats did not have preexposure; this pattern was supported by results from c-fos imaging. We suggest that multimodal preexposure alters the circuitry responsible for object recognition, in this case obviating the need for PPC contributions and expanding PRh involvement, consistent with the polymodal nature of PRh connections and results from primates indicating a key role for PRh in multisensory object representation. These findings have significant implications for our understanding of multisensory information processing, suggesting that the nature of an individual's past experience with an object strongly determines the brain circuitry involved in representing that object's multisensory features in memory. The ability to integrate information from multiple sensory modalities is crucial to the survival of organisms living in complex environments. Appropriate responses to behaviorally relevant objects are informed by integration of multisensory object features. We used crossmodal object recognition tasks in rats to study the neurobiological basis of multisensory object representation. When rats had no prior exposure to the to-be-remembered objects, the spontaneous ability to recognize objects across sensory modalities relied on functional interaction between multiple cortical regions. However, prior multisensory exploration of the task-relevant objects remapped cortical contributions, negating the involvement of one region and significantly expanding the role of another. This finding emphasizes the dynamic nature of cortical representation of objects in relation to past experience. Copyright © 2016 the authors 0270-6474/16/361273-17$15.00/0.

Laser scanning system for object monitoring

DOEpatents

McIntyre, Timothy James [Knoxville, TN; Maxey, Lonnie Curtis [Powell, TN; Chiaro, Jr; John, Peter [Clinton, TN

2008-04-22

A laser scanner is located in a fixed position to have line-of-sight access to key features of monitored objects. The scanner rapidly scans pre-programmed points corresponding to the positions of retroreflecting targets affixed to the key features of the objects. The scanner is capable of making highly detailed scans of any portion of the field of view, permitting the exact location and identity of targets to be confirmed. The security of an object is verified by determining that the cooperative target is still present and that its position has not changed. The retroreflecting targets also modulate the reflected light for purposes of returning additional information back to the location of the scanner.

Using cognitive task analysis to identify critical decisions in the laparoscopic environment.

PubMed

Craig, Curtis; Klein, Martina I; Griswold, John; Gaitonde, Krishnanath; McGill, Thomas; Halldorsson, Ari

2012-12-01

The aim of this study was to identify the critical decisions surgeons need to make regarding laparoscopic surgery, the information these decisions are based on, the strategies employed by surgeons to reach their objectives, and the difficulties experienced by novices. Laparoscopic training focuses on the development of technical skills. However, successful surgical outcomes are also dependent on appropriate decisions made during surgery, which are influenced by critical cues and the use of appropriate strategies. Novices might not be as adept at cue detection and strategy use. Participants were eight attending surgeons. The authors employed task-analytic techniques to identify critical decisions inherent in laparoscopy and the cues, strategies, and novice traps associated with these decisions. The authors used decision requirements tables to organize the data into the key decisions made during the preoperative, operative, and postoperative phases as well as the cues, strategies, and novice traps associated with these decisions. Key decisions identified for the preoperative phase included but were not limited to the decision of performing a laparoscopic versus open surgery, necessity to review the literature, practicing the procedure, and trocar placement. Some key decisions identified for the operative phase included converting to open surgery, performing angiograms, cutting tissue or organs, and reevaluation of the approach. Only one key decision was identified for the postoperative phrase: whether the surgeon's technique needs to be evaluated and revised. The laparoscopic environment requires complex decision making, and novices are prone to errors in their decisions. The information elicited in this study is applicable to laparoscopic training.

The Sensor Test for Orion RelNav Risk Mitigation Development Test Objective

NASA Technical Reports Server (NTRS)

Christian, John A.; Hinkel, Heather; Maguire, Sean

2011-01-01

The Sensor Test for Orion Relative-Navigation Risk Mitigation (STORRM) Development Test Objective (DTO) ew aboard the Space Shuttle Endeavour on STS-134, and was designed to characterize the performance of the ash LIDAR being developed for the Orion. This ash LIDAR, called the Vision Navigation Sensor (VNS), will be the primary navigation instrument used by the Orion vehicle during rendezvous, proximity operations, and docking. This paper provides an overview of the STORRM test objectives and the concept of operations. It continues with a description of the STORRM's major hardware compo nents, which include the VNS and the docking camera. Next, an overview of crew and analyst training activities will describe how the STORRM team prepared for flight. Then an overview of how insight data collection and analysis actually went is presented. Key ndings and results from this project are summarized, including a description of "truth" data. Finally, the paper concludes with lessons learned from the STORRM DTO.

Comet nucleus sample return mission

NASA Technical Reports Server (NTRS)

1983-01-01

A comet nucleus sample return mission in terms of its relevant science objectives, candidate mission concepts, key design/technology requirements, and programmatic issues is discussed. The primary objective was to collect a sample of undisturbed comet material from beneath the surface of an active comet and to preserve its chemical and, if possible, its physical integrity and return it to Earth in a minimally altered state. The secondary objectives are to: (1) characterize the comet to a level consistent with a rendezvous mission; (2) monitor the comet dynamics through perihelion and aphelion with a long lived lander; and (3) determine the subsurface properties of the nucleus in an area local to the sampled core. A set of candidate comets is discussed. The hazards which the spacecraft would encounter in the vicinity of the comet are also discussed. The encounter strategy, the sampling hardware, the thermal control of the pristine comet material during the return to Earth, and the flight performance of various spacecraft systems and the cost estimates of such a mission are presented.

Adherence to secondary prophylaxis for rheumatic heart disease is underestimated by register data

PubMed Central

de Dassel, Jessica Langloh; Fittock, Marea Therese; Wilks, Sagen Cheyenne; Poole, Jane Elizabeth; Carapetis, Jonathan Rhys; Ralph, Anna P.

2017-01-01

Objective In high-burden Australian states and territories, registers of patients with acute rheumatic fever and rheumatic heart disease are maintained for patient management, monitoring of system performance and research. Data validation was undertaken for the Australian Northern Territory Rheumatic Heart Disease Register to determine quality and impact of data cleaning on reporting against key performance indicators: overall adherence, and proportion of patients receiving ≥80% of scheduled penicillin doses for secondary prophylaxis. Methods Register data were compared with data from health centres. Inconsistencies were identified and corrected; adherence was calculated before and after cleaning. Results 2780 penicillin doses were validated; 426 inconsistencies were identified, including 102 incorrect dose dates. After cleaning, mean adherence increased (63.5% to 67.3%, p<0.001) and proportion of patients receiving ≥80% of doses increased (34.2% to 42.1%, p = 0.06). Conclusions The Northern Territory Rheumatic Heart Disease Register underestimates adherence, although the key performance indicator of ≥80% adherence was not significantly affected. Program performance is better than hitherto appreciated. However some errors could affect patient management, as well as accuracy of longitudinal or inter-jurisdictional comparisons. Adequate resources are needed for maintenance of data quality in acute rheumatic fever/rheumatic heart disease registers to ensure provision of evidence-based care and accurate assessment of program impact. PMID:28562621

“Found Performance”: Towards a Musical Methodology for Exploring the Aesthetics of Care

PubMed Central

2017-01-01

Concepts of performance in fine art reflect key processes in music therapy. Music therapy enables practitioners to reframe patients as performers, producing new meanings around the clinical knowledge attached to medical histories and constructs. In this paper, music therapy practices are considered in the wider context of art history, with reference to allied theories from social research. Tracing a century in art that has revised the performativity of found objects (starting with Duchamp’s “Fountain”), and of found sound (crystallised by Cage’s 4′ 33) this paper proposes that music therapy might be a pioneer methodology of “found performance”. Examples from music therapy and contemporary socially engaged art practices are brought as potential links between artistic methodologies and medical humanities research, with specific reference to notions of Aesthetics of Care. PMID:28926991

Airspace Systems Program: Next Generation Air Transportation System, NextGen Systems Analysis, Integration and Evaluation Project. Version 1.0; Project Plan

NASA Technical Reports Server (NTRS)

Quon, Leighton

2010-01-01

The key objectives of the NASA ASP are to: Improve mobility, capacity efficiency and access of the airspace system. Improve collaboration, predictability, and flexibility for the airspace users. Enable accurate modeling and simulation of air transportation systems. Accommodate operations of all classes of aircraft. Maintain system safety and environmental protection. In support of these program objectives, the major goal of the NextGen-SAIE Project is to enable the transition of key capacity and efficiency improvements to the NAS. Since many aspects of the NAS are unique to specific airport or airspace environments, demand on various parts of the NAS is not expected to increase equally as system demand grows. SAIE will provide systems level analysis of the NAS characteristics, constraints, and demands such that a suite of capacity-increasing concepts and technologies for system solutions are enabled and facilitated. The technical objectives in support of this goal are the following: Integration, evaluation, and transition of more mature concepts and technologies in an environment that faithfully emulates real-world complexities. Interoperability research and analysis of ASP technologies across ATM functions is performed to facilitate integration and take ASP concepts and technologies to higher Technology Readiness Level (TRL). Analyses are conducted on the program s concepts to identify the system benefits or impacts. System level analysis is conducted to increase understanding of the characteristics and constraints of airspace system and its domains.

An Operationally Based Vision Assessment Simulator for Domes

NASA Technical Reports Server (NTRS)

Archdeacon, John; Gaska, James; Timoner, Samson

2012-01-01

The Operational Based Vision Assessment (OBVA) simulator was designed and built by NASA and the United States Air Force (USAF) to provide the Air Force School of Aerospace Medicine (USAFSAM) with a scientific testing laboratory to study human vision and testing standards in an operationally relevant environment. This paper describes the general design objectives and implementation characteristics of the simulator visual system being created to meet these requirements. A key design objective for the OBVA research simulator is to develop a real-time computer image generator (IG) and display subsystem that can display and update at 120 frame s per second (design target), or at a minimum, 60 frames per second, with minimal transport delay using commercial off-the-shelf (COTS) technology. There are three key parts of the OBVA simulator that are described in this paper: i) the real-time computer image generator, ii) the various COTS technology used to construct the simulator, and iii) the spherical dome display and real-time distortion correction subsystem. We describe the various issues, possible COTS solutions, and remaining problem areas identified by NASA and the USAF while designing and building the simulator for future vision research. We also describe the critically important relationship of the physical display components including distortion correction for the dome consistent with an objective of minimizing latency in the system. The performance of the automatic calibration system used in the dome is also described. Various recommendations for possible future implementations shall also be discussed.

Privacy protection schemes for fingerprint recognition systems

NASA Astrophysics Data System (ADS)

Marasco, Emanuela; Cukic, Bojan

2015-05-01

The deployment of fingerprint recognition systems has always raised concerns related to personal privacy. A fingerprint is permanently associated with an individual and, generally, it cannot be reset if compromised in one application. Given that fingerprints are not a secret, potential misuses besides personal recognition represent privacy threats and may lead to public distrust. Privacy mechanisms control access to personal information and limit the likelihood of intrusions. In this paper, image- and feature-level schemes for privacy protection in fingerprint recognition systems are reviewed. Storing only key features of a biometric signature can reduce the likelihood of biometric data being used for unintended purposes. In biometric cryptosystems and biometric-based key release, the biometric component verifies the identity of the user, while the cryptographic key protects the communication channel. Transformation-based approaches only a transformed version of the original biometric signature is stored. Different applications can use different transforms. Matching is performed in the transformed domain which enable the preservation of low error rates. Since such templates do not reveal information about individuals, they are referred to as cancelable templates. A compromised template can be re-issued using a different transform. At image-level, de-identification schemes can remove identifiers disclosed for objectives unrelated to the original purpose, while permitting other authorized uses of personal information. Fingerprint images can be de-identified by, for example, mixing fingerprints or removing gender signature. In both cases, degradation of matching performance is minimized.

Examining the influence of family physician supply on district health system performance in South Africa: An ecological analysis of key health indicators

PubMed Central

Mash, Robert J.

2017-01-01

Background The supply of appropriate health workers is a key building block in the World Health Organization’s model of effective health systems. Primary care teams are stronger if they contain doctors with postgraduate training in family medicine. The contribution of such family physicians to the performance of primary care systems has not been evaluated in the African context. Family physicians with postgraduate training entered the South African district health system (DHS) from 2011. Aim This study aimed to evaluate the impact of family physicians within the DHS of South Africa. The objectives were to evaluate the impact of an increase in family physician supply in each district (number per 10 000 population) on key health indicators. Setting All 52 South African health districts were included as units of analysis. Methods An ecological study evaluated the correlations between the supply of family physicians and routinely collected data on district performance for two time periods: 2010/2011 and 2014/2015. Results Five years after the introduction of the new generation of family physicians, this study showed no demonstrable correlation between family physician supply and improved health indicators from the macro-perspective of the district. Conclusion The lack of a measurable impact at the level of the district is most likely because of the very low supply of family physicians in the public sector. Studies which evaluate impact closer to the family physician’s circle of control may be better positioned to demonstrate a measurable impact in the short term. PMID:28470076

Known-plaintext attack on the double phase encoding and its implementation with parallel hardware

NASA Astrophysics Data System (ADS)

Wei, Hengzheng; Peng, Xiang; Liu, Haitao; Feng, Songlin; Gao, Bruce Z.

2008-03-01

A known-plaintext attack on the double phase encryption scheme implemented with parallel hardware is presented. The double random phase encoding (DRPE) is one of the most representative optical cryptosystems developed in mid of 90's and derives quite a few variants since then. Although the DRPE encryption system has a strong power resisting to a brute-force attack, the inherent architecture of DRPE leaves a hidden trouble due to its linearity nature. Recently the real security strength of this opto-cryptosystem has been doubted and analyzed from the cryptanalysis point of view. In this presentation, we demonstrate that the optical cryptosystems based on DRPE architecture are vulnerable to known-plain text attack. With this attack the two encryption keys in the DRPE can be accessed with the help of the phase retrieval technique. In our approach, we adopt hybrid input-output algorithm (HIO) to recover the random phase key in the object domain and then infer the key in frequency domain. Only a plaintext-ciphertext pair is sufficient to create vulnerability. Moreover this attack does not need to select particular plaintext. The phase retrieval technique based on HIO is an iterative process performing Fourier transforms, so it fits very much into the hardware implementation of the digital signal processor (DSP). We make use of the high performance DSP to accomplish the known-plaintext attack. Compared with the software implementation, the speed of the hardware implementation is much fast. The performance of this DSP-based cryptanalysis system is also evaluated.

The impact of intonation and valence on objective and subjective attention capture by auditory alarms.

PubMed

Ljungberg, Jessica K; Parmentier, Fabrice

2012-10-01

The objective was to study the involuntary capture of attention by spoken words varying in intonation and valence. In studies of verbal alarms, the propensity of alarms to capture attention has been primarily assessed with the use of subjective ratings of their perceived urgency. Past studies suggest that such ratings vary with the alarms' spoken urgency and content. We measured attention capture by spoken words varying in valence (negative vs. neutral) and intonation (urgently vs. nonurgently spoken) through subjective ratings and behavioral measures. The key behavioral measure was the response latency to visual stimuli in the presence of spoken words breaking away from the periodical repetition of a tone. The results showed that all words captured attention relative to a baseline standard tone but that this effect was partly counteracted by a relative speeding of responses for urgently compared with nonurgently spoken words. Word valence did not affect behavioral performance. Rating data showed that both intonation and valence increased significantly perceived urgency and attention grabbing without any interaction. The data suggest a congruency between subjective ratings and behavioral performance with respect to spoken intonation but not valence. This study demonstrates the usefulness and feasibility of objective measures of attention capture to help design efficient alarm systems.

Synchrony and entrainment properties of robust circadian oscillators

PubMed Central

Bagheri, Neda; Taylor, Stephanie R.; Meeker, Kirsten; Petzold, Linda R.; Doyle, Francis J.

2008-01-01

Systems theoretic tools (i.e. mathematical modelling, control, and feedback design) advance the understanding of robust performance in complex biological networks. We highlight phase entrainment as a key performance measure used to investigate dynamics of a single deterministic circadian oscillator for the purpose of generating insight into the behaviour of a population of (synchronized) oscillators. More specifically, the analysis of phase characteristics may facilitate the identification of appropriate coupling mechanisms for the ensemble of noisy (stochastic) circadian clocks. Phase also serves as a critical control objective to correct mismatch between the biological clock and its environment. Thus, we introduce methods of investigating synchrony and entrainment in both stochastic and deterministic frameworks, and as a property of a single oscillator or population of coupled oscillators. PMID:18426774

Evaluation of the Performance of the Hybrid Lattice Boltzmann Based Numerical Flux

NASA Astrophysics Data System (ADS)

Zheng, H. W.; Shu, C.

2016-06-01

It is well known that the numerical scheme is a key factor to the stability and accuracy of a Navier-Stokes solver. Recently, a new hybrid lattice Boltzmann numerical flux (HLBFS) is developed by Shu's group. It combines two different LBFS schemes by a switch function. It solves the Boltzmann equation instead of the Euler equation. In this article, the main object is to evaluate the ability of this HLBFS scheme by our in-house cell centered hybrid mesh based Navier-Stokes code. Its performance is examined by several widely-used bench-mark test cases. The comparisons on results between calculation and experiment are conducted. They show that the scheme can capture the shock wave as well as the resolving of boundary layer.

Preparing students for research: faculty/librarian collaboration in a pre-doctoral physical therapy research course.

PubMed

Brooks, Salome V; Bigelow, Susan

2015-12-01

In this article, guest writers Susan Bigelow and Dr Salome Brooks from Springfield College, Massachusetts, present an overview of their evaluative research study in which a faculty professor and the liaison librarian collaborated to develop an information literacy course entitled Physical Therapy (PT) and Health care Research Skills, in order to teach necessary information literacy skills to upper-level undergraduate PT students. Triangulation of the Physical Therapy and Information Literacy standards in alignment with the course objectives strengthened the collaboration, course development and expectations of student performance. Student performance was assessed through formal and expected evaluative means, and the preliminary evidence suggests some key successes in the course outcomes. © 2015 Health Libraries Group.

SMART Careplan System for Continuum of Care

PubMed Central

Kim, Young Ah; Jang, Seon Young; Ahn, Meejung; Kim, Kyung Duck

2015-01-01

Objectives This paper describes the integrated Careplan system, designed to manage and utilize the existing Electronic Medical Record (EMR) system; the system also defines key items for interdisciplinary communication and continuity of patient care. Methods We structured the Careplan system to provide effective interdisciplinary communication for healthcare services. The design of the Careplan system architecture proceeded in four steps-defining target datasets; construction of conceptual framework and architecture; screen layout and storyboard creation; screen user interface (UI) design and development, and pilot test and step-by-step deployment. This Careplan system architecture consists of two parts, a server-side and client-side area. On the server-side, it performs the roles of data retrieval and storage from target EMRs. Furthermore, it performs the role of sending push notifications to the client depending on the careplan series. Also, the Careplan system provides various convenient modules to easily enter an individual careplan. Results Currently, Severance Hospital operates the Careplan system and provides a stable service dealing with dynamic changes (e.g., domestic medical certification, the Joint Commission International guideline) of EMR. Conclusions The Careplan system should go hand in hand with key items for strengthening interdisciplinary communication and information sharing within the EMR environment. A well-designed Careplan system can enhance user satisfaction and completed performance. PMID:25705559

Measuring competition in health care markets.

PubMed Central

Baker, L C

2001-01-01

OBJECTIVE: Measuring competition is increasingly important for analysis of health care markets and policies. Measurement of competition in health care is made complex by the breadth of potential issues under study, by the lack of necessary data, and by rapid changes in health care financing and delivery. This study reviews key issues in the measurement of competition and is designed to familiarize researchers and policymakers interested in competition measurement, but not steeped in its practice, with key concepts, data sources, and ways of adapting measures to fit ongoing changes in health care markets. PRINCIPAL FINDINGS: Attention to several key issues will strengthen measurement. Important components of successful measurement are: careful identification of the products and market areas for study; selection of Herfindahl-Hirschman or other indices to fit the issues being considered; consideration of econometric problems, like endogeneity, with common measures; and attention to the ways that current marketplace changes, like growth in managed care, affect the performance of classic measures. Data needed for constructing measures are also frequently scarce, insufficient, or both. Measurement could be improved with access to better data. PMID:11327175

Co-Optimization of Fuels & Engines: Fuel Blendstocks with the Potential to Optimize Future Gasoline Engine Performance; Identification of Five Chemical Families for Detailed Evaluation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Farrell, John T; Holladay, John; Wagner, Robert

The U.S. Department of Energy's (DOE's) Co-Optimization of Fuels & Engines (Co-Optima) initiative is conducting the early-stage research needed to accelerate the market introduction of advanced fuel and engine technologies. The research includes both spark-ignition (SI) and compression-ignition (CI) combustion approaches, targeting applications that impact the entire on-road fleet (light-, medium-, and heavy-duty vehicles). The initiative's major goals include significant improvements in vehicle fuel economy, lower-cost pathways to reduce emissions, and leveraging diverse U.S. fuel resources. A key objective of Co-Optima's research is to identify new blendstocks that enhance current petroleum blending components, increase blendstock diversity, and provide refiners withmore » increased flexibility to blend fuels with the key properties required to optimize advanced internal combustion engines. This report identifies eight representative blendstocks from five chemical families that have demonstrated the potential to increase boosted SI engine efficiency, meet key fuel quality requirements, and be viable for production at commercial scale by 2025-2030.« less

Performance evaluation of Al-Zahra academic medical center based on Iran balanced scorecard model.

PubMed

Raeisi, Ahmad Reza; Yarmohammadian, Mohammad Hossein; Bakhsh, Roghayeh Mohammadi; Gangi, Hamid

2012-01-01

Growth and development in any country's national health system, without an efficient evaluation system, lacks the basic concepts and tools necessary for fulfilling the system's goals. The balanced scorecard (BSC) is a technique widely used to measure the performance of an organization. The basic core of the BSC is guided by the organization's vision and strategies, which are the bases for the formation of four perspectives of BSC. The goal of this research is the performance evaluation of Al-Zahra Academic Medical Center in Isfahan University of Medical Sciences, based on Iran BSC model. This is a combination (quantitative-qualitative) research which was done at Al-Zahra Academic Medical Center in Isfahan University of Medical Sciences in 2011. The research populations were hospital managers at different levels. Sampling method was purposive sampling in which the key informed personnel participated in determining the performance indicators of hospital as the BSC team members in focused discussion groups. After determining the conceptual elements in focused discussion groups, the performance objectives (targets) and indicators of hospital were determined and sorted in perspectives by the group discussion participants. Following that, the performance indicators were calculated by the experts according to the predetermined objectives; then, the score of each indicator and the mean score of each perspective were calculated. Research findings included development of the organizational mission, vision, values, objectives, and strategies. The strategies agreed upon by the participants in the focus discussion group included five strategies, which were customer satisfaction, continuous quality improvement, development of human resources, supporting innovation, expansion of services and improving the productivity. Research participants also agreed upon four perspectives for the Al-Zahra hospital BSC. In the patients and community perspective (customer), two objectives and three indicators were agreed upon, with a mean score of 75.9%. In the internal process perspective, 4 objectives and 14 indicators were agreed upon, with a mean score of 79.37%. In the learning and growth perspective, four objectives and eight indicators were agreed upon, with a mean score of 81.11%. Finally, in the financial perspective, two objectives and five indicators were agreed upon, with a mean score of 67.15%. One way to create demand for hospital services is performance evaluation by paying close attention to all BSC perspectives, especially the non-financial perspectives such as customers and internal processes perspectives. In this study, the BSC showed the differences in performance level of the organization in different perspectives, which would assist the hospital managers improve their performance indicators. The learning and growth perspective obtained the highest score, and the financial perspective obtained the least score. Since the learning and growth perspective acts as a base for all other perspectives and they depend on it, hospitals must continuously improve the service processes and the quality of services by educating staff and updating their policies and procedures. This can increase customer satisfaction and productivity and finally improve the BSC in financial perspective.

Key ingredients of anti-stigma programs for health care providers: a data synthesis of evaluative studies.

PubMed

Knaak, Stephanie; Modgill, Geeta; Patten, Scott B

2014-10-01

As part of its ongoing effort to combat stigma against mental illness among health care providers, the Mental Health Commission of Canada partnered with organizations conducting anti-stigma interventions. Our objective was to evaluate program effectiveness and to better understand what makes some programs more effective than others. Our paper reports the elements of these programs found to be most strongly associated with favourable outcomes. Our study employed a multi-phased, mixed-methods design. First, a grounded theory qualitative study was undertaken to identify key program elements. Next, each program (n = 22) was coded according to the presence or absence of the identified key program ingredients. Then, random-effects, meta-regression modelling was used to examine the association between program outcomes and the key ingredients. The qualitative analysis led to a 6-ingredient model of key program elements. Results of the quantitative analysis showed that programs that included all 6 of these ingredients performed significantly better than those that did not. Individual analyses of each of the 6 ingredients showed that including multiple forms of social contact and emphasizing recovery were characteristics of the most effective programs. The results provide a validation of a 6-ingredient model of key program elements for anti-stigma programming for health care providers. Emphasizing recovery and including multiple types of social contact are of particular importance for maximizing the effectiveness of anti-stigma programs for health care providers.

Final report of CCQM-K136 measurement of porosity properties (specific adsorption, BET specific surface area, specific pore volume and pore diameter) of nanoporous Al2O3

NASA Astrophysics Data System (ADS)

Sobina, E.; Zimathis, A.; Prinz, C.; Emmerling, F.; Unger, W.; de Santis Neves, R.; Galhardo, C. E.; De Robertis, E.; Wang, H.; Mizuno, K.; Kurokawa, A.

2016-01-01

CCQM key comparison K-136 Measurement of porosity properties (specific adsorption, BET specific surface area, specific pore volume and pore diameter) of nanoporous Al2O3 has been performed by the Surface Analysis Working Group (SAWG) of the Consultative Committee for Amount of Substance (CCQM). The objective of this key comparison is to compare the equivalency of the National Metrology Institutes (NMIs) and Designated Institutes (DIs) for the measurement of specific adsorption, BET specific surface area, specific pore volume and pore diameter) of nanoporous substances (sorbents, catalytic agents, cross-linkers, zeolites, etc) used in advanced technology. In this key comparison, a commercial sorbent (aluminum oxide) was supplied as a sample. Five NMIs participated in this key comparison. All participants used a gas adsorption method, here nitrogen adsorption at 77.3 K, for analysis according to the international standards ISO 15901-2 and 9277. In this key comparison, the degrees of equivalence uncertainties for specific adsorption, BET specific surface area, specific pore volume and pore diameter was established. Main text To reach the main text of this paper, click on Final Report. Note that this text is that which appears in Appendix B of the BIPM key comparison database kcdb.bipm.org/. The final report has been peer-reviewed and approved for publication by the CCQM, according to the provisions of the CIPM Mutual Recognition Arrangement (CIPM MRA).

Sub-cell turning to accomplish micron-level alignment of precision assemblies

NASA Astrophysics Data System (ADS)

Kumler, James J.; Buss, Christian

2017-08-01

Higher performance expectations for complex optical systems demand tighter alignment requirements for lens assembly alignment. In order to meet diffraction limited imaging performance over wide spectral bands across the UV and visible wavebands, new manufacturing approaches and tools must be developed if the optical systems will be produced consistently in volume production. This is especially applicable in the field of precision microscope objectives for life science, semiconductor inspection and laser material processing systems. We observe a rising need for the improvement in the optical imaging performance of objective lenses. The key challenge lies in the micron-level decentration and tilt of each lens element. One solution for the production of high quality lens systems is sub-cell assembly with alignment turning. This process relies on an automatic alignment chuck to align the optical axis of a mounted lens to the spindle axis of the machine. Subsequently, the mount is cut with diamond tools on a lathe with respect to the optical axis of the mount. Software controlled integrated measurement technology ensures highest precision. In addition to traditional production processes, further dimensions can be controlled in a very precise manner, e.g. the air gaps between the lenses. Using alignment turning simplifies further alignment steps and reduces the risk of errors. This paper describes new challenges in microscope objective design and manufacturing, and addresses difficulties with standard production processes. A new measurement and alignment technique is described, and strengths and limitations are outlined.

Key management schemes using routing information frames in secure wireless sensor networks

NASA Astrophysics Data System (ADS)

Kamaev, V. A.; Finogeev, A. G.; Finogeev, A. A.; Parygin, D. S.

2017-01-01

The article considers the problems and objectives of key management for data encryption in wireless sensor networks (WSN) of SCADA systems. The structure of the key information in the ZigBee network and methods of keys obtaining are discussed. The use of a hybrid key management schemes is most suitable for WSN. The session symmetric key is used to encrypt the sensor data, asymmetric keys are used to encrypt the session key transmitted from the routing information. Three algorithms of hybrid key management using routing information frames determined by routing methods and the WSN topology are presented.

Design and performance evaluation of a 1000-year evapotranspiration-capillary surface barrier

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhang, Zhuanfang Fred; Strickland, Christopher E.; Link, Steven O.

Surface barrier technology is used to isolate radioactive waste and to reduce or eliminate recharge water to the waste zone for 1000 years or longer. However, the design and evaluation of such a barrier is challenging because of the extremely long design life. The Prototype Hanford Barrier (PHB) was designed as a 1000-year barrier with pre-determined design and performance objectives and demonstrated in field from 1994 to present. The barrier was tested to evaluate surface-barrier design and performance at the field scale under conditions of enhanced and natural precipitation and of no vegetation. The monitoring data demonstrate that the barriermore » satisfied nearly all key objectives. The PHB far exceeded the Resource Conservation and Recovery Act criteria, functioned in Hanford’s semiarid climate, limited drainage to well below the 0.5 mm yr-1 performance criterion, limited runoff, and minimized erosion. Given the two-decade record of successful performance and consideration of all the processes and mechanisms that could degrade the stability and hydrology in the future, the results suggest the PHB is very likely to perform for its 1000-year design life. This conclusion is based on two assumptions: (1) the exposed subgrade receives protection against erosion and (2) institutional controls prevent inadvertent human activity at the barrier. The PHB design can serve as the base for site-specific barriers over waste sites containing underground nuclear waste, uranium mine tailings, and hazardous mine waste.« less

Glucose improves object-location binding in visual-spatial working memory.

PubMed

Stollery, Brian; Christian, Leonie

2016-02-01

There is evidence that glucose temporarily enhances cognition and that processes dependent on the hippocampus may be particularly sensitive. As the hippocampus plays a key role in binding processes, we examined the influence of glucose on memory for object-location bindings. This study aims to study how glucose modifies performance on an object-location memory task, a task that draws heavily on hippocampal function. Thirty-one participants received 30 g glucose or placebo in a single 1-h session. After seeing between 3 and 10 objects (words or shapes) at different locations in a 9 × 9 matrix, participants attempted to immediately reproduce the display on a blank 9 × 9 matrix. Blood glucose was measured before drink ingestion, mid-way through the session, and at the end of the session. Glucose significantly improves object-location binding (d = 1.08) and location memory (d = 0.83), but not object memory (d = 0.51). Increasing working memory load impairs object memory and object-location binding, and word-location binding is more successful than shape-location binding, but the glucose improvement is robust across all difficulty manipulations. Within the glucose group, higher levels of circulating glucose are correlated with better binding memory and remembering the locations of successfully recalled objects. The glucose improvements identified are consistent with a facilitative impact on hippocampal function. The findings are discussed in the context of the relationship between cognitive processes, hippocampal function, and the implications for glucose's mode of action.

Spinal-Exercise Prescription in Sport: Classifying Physical Training and Rehabilitation by Intention and Outcome

PubMed Central

Spencer, Simon; Wolf, Alex; Rushton, Alison

2016-01-01

Context: Identification of strategies to prevent spinal injury, optimize rehabilitation, and enhance performance is a priority for practitioners. Different exercises produce different effects on neuromuscular performance. Clarity of the purpose of a prescribed exercise is central to a successful outcome. Spinal exercises need to be classified according to the objective of the exercise and planned physical outcome. Objective: To define the modifiable spinal abilities that underpin optimal function during skilled athletic performance, clarify the effect of spinal pain and pathologic conditions, and classify spinal exercises according to the objective of the exercise and intended physical outcomes to inform training and rehabilitation. Design: Qualitative study. Data Collection and Analysis: We conducted a qualitative consensus method of 4 iterative phases. An exploratory panel carried out an extended review of the English-language literature using CINAHL, EMBASE, MEDLINE, and PubMed to identify key themes and subthemes to inform the definitions of exercise categories, physical abilities, and physical outcomes. An expert project group reviewed panel findings. A draft classification was discussed with physiotherapists (n = 49) and international experts. Lead physiotherapy and strength and conditioning teams (n = 17) reviewed a revised classification. Consensus was defined as unanimous agreement. Results: After the literature review and subsequent analysis, we defined spinal abilities in 4 categories: mobility, motor control, work capacity, and strength. Exercises were subclassified by functionality as nonfunctional or functional and by spinal displacement as either static (neutral spinal posture with no segmental displacement) or dynamic (dynamic segmental movement). The proposed terminology and classification support commonality of language for practitioners. Conclusions: The spinal-exercise classification will support clinical reasoning through a framework of spinal-exercise objectives that clearly define the nature of the exercise prescription required to deliver intended physical outcomes. PMID:27661792

Applications of the balanced scorecard for strategic management and performance measurement in the health sector.

PubMed

Behrouzi, Farshad; Shaharoun, Awaluddin Mohamed; Ma'aram, Azanizawati

2014-05-01

In order to attain a useful balanced scorecard (BSC), appropriate performance perspectives and indicators are crucial to reflect all strategies of the organisation. The objectives of this survey were to give an insight regarding the situation of the BSC in the health sector over the past decade, and to afford a generic approach of the BSC development for health settings with specific focus on performance perspectives, performance indicators and BSC generation. After an extensive search based on publication date and research content, 29 articles published since 2002 were identified, categorised and analysed. Four critical attributes of each article were analysed, including BSC generation, performance perspectives, performance indicators and auxiliary tools. The results showed that 'internal business process' was the most notable BSC perspective as it was included in all reviewed articles. After investigating the literature, it was concluded that its comprehensiveness is the reason for the importance and high usage of this perspective. The findings showed that 12 cases out of 29 reviewed articles (41%) exceeded the maximum number of key performance indicators (KPI) suggested in a previous study. It was found that all 12 cases were large organisations with numerous departments (e.g. national health organisations). Such organisations require numerous KPI to cover all of their strategic objectives. It was recommended to utilise the cascaded BSC within such organisations to avoid complexity and difficulty in gathering, analysing and interpreting performance data. Meanwhile it requires more medical staff to contribute in BSC development, which will result in greater reliability of the BSC.

Projection Mapping User Interface for Disabled People

PubMed Central

Simutis, Rimvydas; Maskeliūnas, Rytis

2018-01-01

Difficulty in communicating is one of the key challenges for people suffering from severe motor and speech disabilities. Often such person can communicate and interact with the environment only using assistive technologies. This paper presents a multifunctional user interface designed to improve communication efficiency and person independence. The main component of this interface is a projection mapping technique used to highlight objects in the environment. Projection mapping makes it possible to create a natural augmented reality information presentation method. The user interface combines a depth sensor and a projector to create camera-projector system. We provide a detailed description of camera-projector system calibration procedure. The described system performs tabletop object detection and automatic projection mapping. Multiple user input modalities have been integrated into the multifunctional user interface. Such system can be adapted to the needs of people with various disabilities. PMID:29686827

Practical experience with graphical user interfaces and object-oriented design in the clinical laboratory.

PubMed

Wells, I G; Cartwright, R Y; Farnan, L P

1993-12-15

The computing strategy in our laboratories evolved from research in Artificial Intelligence, and is based on powerful software tools running on high performance desktop computers with a graphical user interface. This allows most tasks to be regarded as design problems rather than implementation projects, and both rapid prototyping and an object-oriented approach to be employed during the in-house development and enhancement of the laboratory information systems. The practical application of this strategy is discussed, with particular reference to the system designer, the laboratory user and the laboratory customer. Routine operation covers five departments, and the systems are stable, flexible and well accepted by the users. Client-server computing, currently undergoing final trials, is seen as the key to further development, and this approach to Pathology computing has considerable potential for the future.

Evaluation of objectivity, reliability and criterion validity of the key indicator method for manual handling operations (KIM-MHO), draft 2007.

PubMed

Klußmann, André; Gebhardt, Hansjürgen; Rieger, Monika; Liebers, Falk; Steinberg, Ulf

2012-01-01

Upper extremity musculoskeletal symptoms and disorders are common in the working population. The economic and social impact of such disorders is considerable. Long-time, dynamic repetitive exposure of the hand-arm system during manual handling operations (MHO) alone or in combination with static and postural effort are recognised as causes of musculoskeletal symptoms and disorders. The assessment of these manual work tasks is crucial to estimate health risks of exposed employees. For these work tasks, a new method for the assessment of the working conditions was developed and a validation study was performed. The results suggest satisfying criterion validity and moderate objectivity of the KIM-MHO draft 2007. The method was modified and evaluated again. It is planned to release a new version of KIM-MHO in spring 2012.

Projection Mapping User Interface for Disabled People.

PubMed

Gelšvartas, Julius; Simutis, Rimvydas; Maskeliūnas, Rytis

2018-01-01

Difficulty in communicating is one of the key challenges for people suffering from severe motor and speech disabilities. Often such person can communicate and interact with the environment only using assistive technologies. This paper presents a multifunctional user interface designed to improve communication efficiency and person independence. The main component of this interface is a projection mapping technique used to highlight objects in the environment. Projection mapping makes it possible to create a natural augmented reality information presentation method. The user interface combines a depth sensor and a projector to create camera-projector system. We provide a detailed description of camera-projector system calibration procedure. The described system performs tabletop object detection and automatic projection mapping. Multiple user input modalities have been integrated into the multifunctional user interface. Such system can be adapted to the needs of people with various disabilities.

[Food and nutrition education in school: a literature review].

PubMed

Ramos, Flavia Pascoal; Santos, Ligia Amparo da Silva; Reis, Amélia Borba Costa

2013-11-01

Food and nutrition education is viewed as a key strategy for promoting healthy eating habits, and the school is an appropriate space for developing these activities. The objective of this study was to describe and analyze the scientific literature on intervention studies on food and nutrition education in Brazilian schools. A literature review was conducted, selecting articles published from 2000 to 2011. Despite the topic's current importance, there were few articles, and most were published after 2009. The main results showed improvement in the children's nutritional knowledge and food choices. However, most studies that performed anthropometric measurements failed to show changes in nutritional status. In addition, the studies chose designs based on epidemiological intervention studies, indicating the need for interventions based on innovative health education methodologies and research models that are consistent with the study's objects.

Multi-objective optimization design and experimental investigation of centrifugal fan performance

NASA Astrophysics Data System (ADS)

Zhang, Lei; Wang, Songling; Hu, Chenxing; Zhang, Qian

2013-11-01

Current studies of fan performance optimization mainly focus on two aspects: one is to improve the blade profile, and another is only to consider the influence of single impeller structural parameter on fan performance. However, there are few studies on the comprehensive effect of the key parameters such as blade number, exit stagger angle of blade and the impeller outlet width on the fan performance. The G4-73 backward centrifugal fan widely used in power plants is selected as the research object. Based on orthogonal design and BP neural network, a model for predicting the centrifugal fan performance parameters is established, and the maximum relative errors of the total pressure and efficiency are 0.974% and 0.333%, respectively. Multi-objective optimization of total pressure and efficiency of the fan is conducted with genetic algorithm, and the optimum combination of impeller structural parameters is proposed. The optimized parameters of blade number, exit stagger angle of blade and the impeller outlet width are seperately 14, 43.9°, and 21 cm. The experiments on centrifugal fan performance and noise are conducted before and after the installation of the new impeller. The experimental results show that with the new impeller, the total pressure of fan increases significantly in total range of the flow rate, and the fan efficiency is improved when the relative flow is above 75%, also the high efficiency area is broadened. Additionally, in 65% -100% relative flow, the fan noise is reduced. Under the design operating condition, total pressure and efficiency of the fan are improved by 6.91% and 0.5%, respectively. This research sheds light on the considering of comprehensive effect of impeller structrual parameters on fan performance, and a new impeller can be designed to satisfy the engineering demand such as energy-saving, noise reduction or solving air pressure insufficiency for power plants.

Body Unloading Associated with Space Flight and Bed-rest Impacts Functional Performance

NASA Technical Reports Server (NTRS)

Bloomberg, J. J.; Ballard, K. L.; Batson, C. D.; Buxton, R. E.; Feiveson, A. H.; Kofman, I. S.; Lee, S. M. C.; Miller, C. A.; Mulavara, A. P.; Peters, B. T.;

The indicator performance estimate approach to determining acceptable wilderness conditions

NASA Astrophysics Data System (ADS)

Hollenhorst, Steven; Gardner, Lisa

1994-11-01

Using data from a study conducted in the Cranberry Wilderness Area of West Virginia, United States, this paper describes how a modified importance—performance approach can be used to prioritize wilderness indicators and determine how much change from the pristine is acceptable. The approach uses two key types of information: (1) indicator importance, or visitor opinion as to which wilderness indicators have the greatest influence on their experience, and (2) management performance, or the extent to which actual indicator conditions exceed or are within visitor expectations. Performance was represented by calculating indicator performance estimates (IPEs), as defined by standardized differences between actual conditions and visitor preferences for each indicator. The results for each indicator are then presented graphically on a four-quadrant matrix for objective interpretation. Each quadrant represents a management response: keep up the good work, concentrate here, low priority, or possible overkill. The technique allows managers to more systematically and effectively utilize information routinely collected during the limits of acceptable change wilderness planning process.

The Impact of Blended Learning on Student Performance in a Cardiovascular Pharmacotherapy Course

PubMed Central

McLaughlin, Jacqueline E.; Gharkholonarehe, Nastaran; Khanova, Julia; Deyo, Zach M.

2015-01-01

Objective. To examine student engagement with, perception of, and performance resulting from blended learning for venous thromboembolism in a required cardiovascular pharmacotherapy course for second-year students. Design. In 2013, key foundational content was packaged into an interactive online module for students to access prior to coming to class; class time was dedicated to active-learning exercises. Assessment. Students who accessed all online module segments participated in more in class clicker questions (p=0.043) and performed better on the examination (p=0.023). There was no difference in clicker participation or examination performance based on time of module access (prior to or after class). The majority of participants agreed or strongly agreed that foundational content learned prior to class, applied activities during class, and content-related questions in the online module greatly enhanced learning. Conclusion. This study highlights the importance of integrating online modules with classroom learning and the role of blended learning in improving academic performance. PMID:25861105

Overview of Intelligent Systems and Operations Development

NASA Technical Reports Server (NTRS)

Pallix, Joan; Dorais, Greg; Penix, John

2004-01-01

To achieve NASA's ambitious mission objectives for the future, aircraft and spacecraft will need intelligence to take the correct action in a variety of circumstances. Vehicle intelligence can be defined as the ability to "do the right thing" when faced with a complex decision-making situation. It will be necessary to implement integrated autonomous operations and low-level adaptive flight control technologies to direct actions that enhance the safety and success of complex missions despite component failures, degraded performance, operator errors, and environment uncertainty. This paper will describe the array of technologies required to meet these complex objectives. This includes the integration of high-level reasoning and autonomous capabilities with multiple subsystem controllers for robust performance. Future intelligent systems will use models of the system, its environment, and other intelligent agents with which it interacts. They will also require planners, reasoning engines, and adaptive controllers that can recommend or execute commands enabling the system to respond intelligently. The presentation will also address the development of highly dependable software, which is a key component to ensure the reliability of intelligent systems.

Using Cloud-based Storage Technologies for Earth Science Data

NASA Astrophysics Data System (ADS)

Michaelis, A.; Readey, J.; Votava, P.

2016-12-01

Cloud based infrastructure may offer several key benefits of scalability, built in redundancy and reduced total cost of ownership as compared with a traditional data center approach. However, most of the tools and software systems developed for NASA data repositories were not developed with a cloud based infrastructure in mind and do not fully take advantage of commonly available cloud-based technologies. Object storage services are provided through all the leading public (Amazon Web Service, Microsoft Azure, Google Cloud, etc.) and private (Open Stack) clouds, and may provide a more cost-effective means of storing large data collections online. We describe a system that utilizes object storage rather than traditional file system based storage to vend earth science data. The system described is not only cost effective, but shows superior performance for running many different analytics tasks in the cloud. To enable compatibility with existing tools and applications, we outline client libraries that are API compatible with existing libraries for HDF5 and NetCDF4. Performance of the system is demonstrated using clouds services running on Amazon Web Services.

Object-oriented numerics with FOSS: comparing PyPy &amp; NumPy, GCC/Clang &amp; Bitz++ and Gfortran

NASA Astrophysics Data System (ADS)

Jarecka, Dorota; Arabas, Sylwester; Fijalkowski, Maciej; Jaruga, Anna; Del Vento, Davide

2013-04-01

Employment of object-oriented programming (OOP) techniques may help to improve code readability, and hence its auditability and maintainability - both being arguably crucial for scientific software. OOP offers, in particular, the possibility to reproduce in the program code the mathematical "blackboard abstractions" used in the literature. There exist a number of free and open-source tools allowing to obtain this goal without sacrificing performance. An OOP implementation of the MPDATA advection algorithm used as a core of weather, ocean and climate modelling systems will serve as an example for briefly highlighting some relevant recent FOSS developments including: - NumPy support in the PyPy just-in-time compiler of Python. - the Blitz++ library coupled with the C++11 support in GCC and Clang; - support for OOP constructs from Fortran 2003/2008 in GFortran; A brief overview of other performance-related packages for Python like Numba and Cython will be also given. This poster will describe and extends key findings presented in http://arxiv.org/abs/1301.1334

Exemplar Units of Work for English. Key Stage 3: National Strategy.

ERIC Educational Resources Information Center

Department for Education and Skills, London (England).

These exemplar units of work for National Strategy Key Stage 3 English show how medium and short-term planning can be based on the Key Stage 3 Framework objectives and support the implementation of Curriculum 2000. The Key Stage 3 English strand introduces pupils to more specialist study of language and literature and supports the study of…

A Blueprint for Innovation to Achieve Health System Transformation.

PubMed

Snowdon, Anne W

2017-01-01

Global health systems are challenged by escalating costs and growing demands for care created by the demands of aging populations and rising rates of chronic illness which place unsustainable pressure on health systems to meet population health needs. To overcome these challenges, transformational change is needed to strengthen health system performance and sustainability. Innovation is widely viewed as the strategy to drive transformational change in health systems; yet to date, innovation has lacked a clearly defined focus or agenda to achieve transformation. An actionable innovation agenda is needed to achieve transformational change for health systems. The key conditions for success as an innovation strategy are examined, including clearly defined innovation objectives, key milestones, and actionable steps every system stakeholder must pursue in order to guide the innovation agenda and ultimately accelerate the transformational changes needed for a sustainable healthcare system that delivers value to populations.

Design and development of the mobile game based on the J2ME technology

NASA Astrophysics Data System (ADS)

He, Junhua

2011-12-01

With the continuous improvement of mobile performance, mobile entertainment applications market trend has been increasingly clear, mobile entertainment applications will be after the PC entertainment applications is another important business growth. Through the full analysis of the current mobile entertainment applications market demand and trends, the author has accumulated a lot of theoretical knowledge and practical experience. Rational, using of some new technology for a mobile entertainment games design, and described the development of key technologies required for mobile game an analysis and design of the game, and to achieve a complete game development. Light of the specific mobile game project - "Battle City", detailed the development of a mobile game based on the J2ME platform, the basic steps and the various key elements, focusing on how to use object-oriented thinking on the role of mobile phones in the abstract and Game Animation package, the source code with specific instructions.

Design and development of the mobile game based on the J2ME technology

NASA Astrophysics Data System (ADS)

He, JunHua

2012-01-01

With the continuous improvement of mobile performance, mobile entertainment applications market trend has been increasingly clear, mobile entertainment applications will be after the PC entertainment applications is another important business growth. Through the full analysis of the current mobile entertainment applications market demand and trends, the author has accumulated a lot of theoretical knowledge and practical experience. Rational, using of some new technology for a mobile entertainment games design, and described the development of key technologies required for mobile game an analysis and design of the game, and to achieve a complete game development. Light of the specific mobile game project - "Battle City", detailed the development of a mobile game based on the J2ME platform, the basic steps and the various key elements, focusing on how to use object-oriented thinking on the role of mobile phones in the abstract and Game Animation package, the source code with specific instructions.

Mars Design Reference Architecture 5.0 Study: Executive Summary

NASA Technical Reports Server (NTRS)

Drake, Bret G.

2008-01-01

The NASA Mars Design Reference Architecture 5.0 Study seeks to update its long term goals and objective for human exploration missions; flight and surface systems for human missions and supporting infrastructure; operational concept for human and robotic exploration of Mars; key challenges including risk and cost drivers; and, its development schedule options. It additionally seeks to assess strategic linkages between lunar and Mars strategies and develop and understanding of methods for reducing the cost/risk of human Mars missions through investment in research, technology development, and synergy with other exploration plans. Recommendations are made regarding conjunction class (long-stay) missions which are seen as providing the best balance of cost, risk, and performance. Additionally, this study reviews entry, descent, and landing challenges; in-space transportation systems; launch vehicle and Orion assessments; risk and risk mitigation; key driving requirements and challenges; and, lunar linkages.

Objectives over Time: A Look at Four Decades of Objectives in the Educational Research Literature

ERIC Educational Resources Information Center

Marken, James; Morrison, Gary

2013-01-01

While the concept of objectives is widely used in many applied fields of instruction, the systematic derivation and application of objectives for learning and instruction is a key feature of systematic instructional design. However, the treatment of objectives and the terminology surrounding them is sometimes nebulously employed. This article…

Parallel and Preemptable Dynamically Dimensioned Search Algorithms for Single and Multi-objective Optimization in Water Resources

NASA Astrophysics Data System (ADS)

Tolson, B.; Matott, L. S.; Gaffoor, T. A.; Asadzadeh, M.; Shafii, M.; Pomorski, P.; Xu, X.; Jahanpour, M.; Razavi, S.; Haghnegahdar, A.; Craig, J. R.

2015-12-01

We introduce asynchronous parallel implementations of the Dynamically Dimensioned Search (DDS) family of algorithms including DDS, discrete DDS, PA-DDS and DDS-AU. These parallel algorithms are unique from most existing parallel optimization algorithms in the water resources field in that parallel DDS is asynchronous and does not require an entire population (set of candidate solutions) to be evaluated before generating and then sending a new candidate solution for evaluation. One key advance in this study is developing the first parallel PA-DDS multi-objective optimization algorithm. The other key advance is enhancing the computational efficiency of solving optimization problems (such as model calibration) by combining a parallel optimization algorithm with the deterministic model pre-emption concept. These two efficiency techniques can only be combined because of the asynchronous nature of parallel DDS. Model pre-emption functions to terminate simulation model runs early, prior to completely simulating the model calibration period for example, when intermediate results indicate the candidate solution is so poor that it will definitely have no influence on the generation of further candidate solutions. The computational savings of deterministic model preemption available in serial implementations of population-based algorithms (e.g., PSO) disappear in synchronous parallel implementations as these algorithms. In addition to the key advances above, we implement the algorithms across a range of computation platforms (Windows and Unix-based operating systems from multi-core desktops to a supercomputer system) and package these for future modellers within a model-independent calibration software package called Ostrich as well as MATLAB versions. Results across multiple platforms and multiple case studies (from 4 to 64 processors) demonstrate the vast improvement over serial DDS-based algorithms and highlight the important role model pre-emption plays in the performance of parallel, pre-emptable DDS algorithms. Case studies include single- and multiple-objective optimization problems in water resources model calibration and in many cases linear or near linear speedups are observed.

Advances in Cryptology - EUROCRYPT’ 97

DTIC Science & Technology

1998-05-03

public keys is about T/102. For example, one can choose T ~ 227.67 and M ~ 2 35.65. To obtain the secret session key from the determined internal state...scenario, where the objective is to reconstruct the secret key controlled LFSR initial states from the known keystream sequence, for a survey see... the secret message keys defining different initial internal states. This may open new possibilities for the secret key recovery cryptanalytic attacks

Characteristic sounds facilitate visual search.

PubMed

Iordanescu, Lucica; Guzman-Martinez, Emmanuel; Grabowecky, Marcia; Suzuki, Satoru

2008-06-01

In a natural environment, objects that we look for often make characteristic sounds. A hiding cat may meow, or the keys in the cluttered drawer may jingle when moved. Using a visual search paradigm, we demonstrated that characteristic sounds facilitated visual localization of objects, even when the sounds carried no location information. For example, finding a cat was faster when participants heard a meow sound. In contrast, sounds had no effect when participants searched for names rather than pictures of objects. For example, hearing "meow" did not facilitate localization of the word cat. These results suggest that characteristic sounds cross-modally enhance visual (rather than conceptual) processing of the corresponding objects. Our behavioral demonstration of object-based cross-modal enhancement complements the extensive literature on space-based cross-modal interactions. When looking for your keys next time, you might want to play jingling sounds.

Integrating Key Competences in School Physical Education Programmes

ERIC Educational Resources Information Center

Lleixà, Teresa; González-Arévalo, Carles; Braz-Vieira, Marcelo

2016-01-01

In 2006, the European Union published its recommendations on competences for lifelong learning. Since then, key competences have been integrated into the official curriculum in Spain. The objectives of the present study are: a) to describe the strategies used most frequently by physical education teachers to incorporate key competences in their…

Methodology for the development of a Canadian national EMS research agenda

PubMed Central

2011-01-01

Background Many health care disciplines use evidence-based decision making to improve patient care and system performance. While the amount and quality of emergency medical services (EMS) research in Canada has increased over the past two decades, there has not been a unified national plan to enable research, ensure efficient use of research resources, guide funding decisions and build capacity in EMS research. Other countries have used research agendas to identify barriers and opportunities in EMS research and define national research priorities. The objective of this project is to develop a national EMS research agenda for Canada that will: 1) explore what barriers to EMS research currently exist, 2) identify current strengths and opportunities that may be of benefit to advancing EMS research, 3) make recommendations to overcome barriers and capitalize on opportunities, and 4) identify national EMS research priorities. Methods/Design Paramedics, educators, EMS managers, medical directors, researchers and other key stakeholders from across Canada will be purposefully recruited to participate in this mixed methods study, which consists of three phases: 1) qualitative interviews with a selection of the study participants, who will be asked about their experience and opinions about the four study objectives, 2) a facilitated roundtable discussion, in which all participants will explore and discuss the study objectives, and 3) an online Delphi consensus survey, in which all participants will be asked to score the importance of each topic discovered during the interviews and roundtable as they relate to the study objectives. Results will be analyzed to determine the level of consensus achieved for each topic. Discussion A mixed methods approach will be used to address the four study objectives. We anticipate that the keys to success will be: 1) ensuring a representative sample of EMS stakeholders, 2) fostering an open and collaborative roundtable discussion, and 3) adhering to a predefined approach to measure consensus on each topic. Steps have been taken in the methodology to address each of these a priori concerns. PMID:21961624

Network Analysis of Rat Spatial Cognition: Behaviorally-Established Symmetry in a Physically Asymmetrical Environment

PubMed Central

Eilam, David; Portugali, Juval; Blumenfeld-Lieberthal, Efrat

2012-01-01

Background We set out to solve two inherent problems in the study of animal spatial cognition (i) What is a “place”?; and (ii) whether behaviors that are not revealed as differing by one methodology could be revealed as different when analyzed using a different approach. Methodology We applied network analysis to scrutinize spatial behavior of rats tested in either a symmetrical or asymmetrical layout of 4, 8, or 12 objects placed along the perimeter of a round arena. We considered locations as the units of the network (nodes), and passes between locations as the links within the network. Principal Findings While there were only minor activity differences between rats tested in the symmetrical or asymmetrical object layouts, network analysis revealed substantial differences. Viewing ‘location’ as a cluster of stopping coordinates, the key locations (large clusters of stopping coordinates) were at the objects in both layouts with 4 objects. However, in the asymmetrical layout with 4 objects, additional key locations were spaced by the rats between the objects, forming symmetry among the key locations. It was as if the rats had behaviorally imposed symmetry on the physically asymmetrical environment. Based on a previous finding that wayfinding is easier in symmetrical environments, we suggest that when the physical attributes of the environment were not symmetrical, the rats established a symmetric layout of key locations, thereby acquiring a more legible environment despite its complex physical structure. Conclusions and Significance The present study adds a behavioral definition for “location”, a term that so far has been mostly discussed according to its physical attributes or neurobiological correlates (e.g. - place and grid neurons). Moreover, network analysis enabled the assessment of the importance of a location, even when that location did not display any distinctive physical properties. PMID:22815808

Team Objective Structured Bedside Assessment (TOSBA) as formative assessment in undergraduate Obstetrics and Gynaecology: a cohort study.

PubMed

Deane, Richard P; Joyce, Pauline; Murphy, Deirdre J

2015-10-09

Team Objective Structured Bedside Assessment (TOSBA) is a learning approach in which a team of medical students undertake a set of structured clinical tasks with real patients in order to reach a diagnosis and formulate a management plan and receive immediate feedback on their performance from a facilitator. TOSBA was introduced as formative assessment to an 8-week undergraduate teaching programme in Obstetrics and Gynaecology (O&G) in 2013/14. Each student completed 5 TOSBA sessions during the rotation. The aim of the study was to evaluate TOSBA as a teaching method to provide formative assessment for medical students during their clinical rotation. The research questions were: Does TOSBA improve clinical, communication and/or reasoning skills? Does TOSBA provide quality feedback? A prospective cohort study was conducted over a full academic year (2013/14). The study used 2 methods to evaluate TOSBA as a teaching method to provide formative assessment: (1) an online survey of TOSBA at the end of the rotation and (2) a comparison of the student performance in TOSBA with their performance in the final summative examination. During the 2013/14 academic year, 157 students completed the O&G programme and the final summative examination . Each student completed the required 5 TOSBA tasks. The response rate to the student survey was 68 % (n = 107/157). Students reported that TOSBA was a beneficial learning experience with a positive impact on clinical, communication and reasoning skills. Students rated the quality of feedback provided by TOSBA as high. Students identified the observation of the performance and feedback of other students within their TOSBA team as key features. High achieving students performed well in both TOSBA and summative assessments. The majority of students who performed poorly in TOSBA subsequently passed the summative assessments (n = 20/21, 95 %). Conversely, the majority of students who failed the summative assessments had satisfactory scores in TOSBA (n = 6/7, 86 %). TOSBA has a positive impact on the clinical, communication and reasoning skills of medical students through the provision of high-quality feedback. The use of structured pre-defined tasks, the observation of the performance and feedback of other students and the use of real patients are key elements of TOSBA. Avoiding student complacency and providing accurate feedback from TOSBA are on-going challenges.

A framework for operationalization of strategic plans and metrics for corporate performance measurement in transportation asset management

NASA Astrophysics Data System (ADS)

Mteri, Hassan H.

This thesis investigated the business processes required to translate corporate-level strategic plans into tactical and operational plans in the context of transportation asset management. The study also developed a framework for effective performance measure for departments of transportation. The thesis was based on a case study of transportation agencies in the U.S.A. and Canada. The scope is therefore limited or more directly applicable to transportation assets such as pavement, bridges and culverts. The goal was to address the problem of translating or managing strategic plans, especially in the context of the public sector responsible for operating transportation infrastructure. It was observed that many agencies have been successful in formulating good strategic plans but they have performed relatively poorly in translating such corporate-level strategic plans into operational activities. A questionnaire survey was designed and targeted about 30 state agencies that are currently active in transportation asset management. Twenty one (21) transportation agencies in the USA and Canada responded to the questionnaire. The analysis of the questionnaire data showed that there is a lack of a standard approach to managing corporate strategic plans in transportation agencies. The results also indicated that most transportation agencies operate in three organizational levels but there was no systematic approach of translating goal and objectives from high level to lower levels. Approaches in performance measurement were found to vary from agency to agency. A number of limitations were identified in the existing practice on performance measurements. Key weaknesses include the large number of measures in use (as many as 25 or more), and the disconnection between the measures used and the corporate goals and objectives. Lessons from the private sector were thoroughly reviewed in order to build the groundwork for adapting existing tools to the public sector. The existing literature, assumptions and characteristics that make the Balanced Scorecards and strategy maps work effectively in the private sector were identified. Gaps in implementation of strategic plans and the use of Balanced Scorecard in the public sector were derived. Although Balanced Scorecards have previously been used to a limited extent in transportation agencies, the use of combined Balanced Scorecards and strategy maps with a much broader utility of translating strategic plans into tactical and operational activities for Transportation Asset Management is yet to be established. The thesis presents a framework to operationalize strategic plans through the combined application of Balanced Scorecards and strategy maps. The proposed framework aligns overarching objectives in all organizational levels: corporate, tactical, and operation, in which detail information is delegated from top level to lower levels. Furthermore, the thesis presents a proposed framework for developing and using effective corporate performance measures. The framework for performance measures provides a key tool for tracking progress and ensuring overall operationalization of strategic plans in transportation agencies. The thesis presents a methodology to assess existing performance measures so that agencies can reduce the number of measures, to be more effective and manageable. It was found that among other good characteristics, corporate performance measures must be tied to agency's goals and objectives and must be sensitive or responsive to program delivery activities and to the impacts of decisions about resource allocation.

Experimental and Modeling Studies of the Combustion Characteristics of Conventional and Alternative Jet Fuels. Final Report

NASA Technical Reports Server (NTRS)

Meeks, Ellen; Naik, Chitral V.; Puduppakkam, Karthik V.; Modak, Abhijit; Egolfopoulos, Fokion N.; Tsotsis, Theo; Westbrook, Charles K.

2011-01-01

The objectives of this project have been to develop a comprehensive set of fundamental data regarding the combustion behavior of jet fuels and appropriately associated model fuels. Based on the fundamental study results, an auxiliary objective was to identify differentiating characteristics of molecular fuel components that can be used to explain different fuel behavior and that may ultimately be used in the planning and design of optimal fuel-production processes. The fuels studied in this project were Fischer-Tropsch (F-T) fuels and biomass-derived jet fuels that meet certain specifications of currently used jet propulsion applications. Prior to this project, there were no systematic experimental flame data available for such fuels. One of the key goals has been to generate such data, and to use this data in developing and verifying effective kinetic models. The models have then been reduced through automated means to enable multidimensional simulation of the combustion characteristics of such fuels in real combustors. Such reliable kinetic models, validated against fundamental data derived from laminar flames using idealized flow models, are key to the development and design of optimal combustors and fuels. The models provide direct information about the relative contribution of different molecular constituents to the fuel performance and can be used to assess both combustion and emissions characteristics.

X-43D Conceptual Design and Feasibility Study

NASA Technical Reports Server (NTRS)

Johnson, Donald B.; Robinson, Jeffrey S.

2005-01-01

NASA s Next Generation Launch Technology (NGLT) Program, in conjunction with the office of the Director of Defense Research and Engineering (DDR&E), developed an integrated hypersonic technology demonstration roadmap. This roadmap is an integral part of the National Aerospace Initiative (NAI), a multi-year, multi-agency cooperative effort to invest in and develop, among other things, hypersonic technologies. This roadmap contains key ground and flight demonstrations required along the path to developing a reusable hypersonic space access system. One of the key flight demonstrations required for systems that will operate in the high Mach number regime is the X-43D. As currently conceived, the X-43D is a Mach 15 flight test vehicle that incorporates a hydrogen-fueled scramjet engine. The purpose of the X-43D is to gather high Mach number flight environment and engine operability information which is difficult, if not impossible, to gather on the ground. During 2003, the NGLT Future Hypersonic Flight Demonstration Office initiated a feasibility study on the X-43D. The objective of the study was to develop a baseline conceptual design, assess its performance, and identify the key technical issues. The study also produced a baseline program plan, schedule, and cost, along with a list of key programmatic risks.

Quantum key distribution: vulnerable if imperfectly implemented

NASA Astrophysics Data System (ADS)

Leuchs, G.

2013-10-01

We report several vulnerabilities found in Clavis2, the flagship quantum key distribution (QKD) system from ID Quantique. We show the hacking of a calibration sequence run by Clavis2 to synchronize the Alice and Bob devices before performing the secret key exchange. This hack induces a temporal detection efficiency mismatch in Bob that can allow Eve to break the security of the cryptosystem using faked states. We also experimentally investigate the superlinear behaviour in the single-photon detectors (SPDs) used by Bob. Due to this superlinearity, the SPDs feature an actual multi-photon detection probability which is generally higher than the theoretically-modelled value. We show how this increases the risk of detector control attacks on QKD systems (including Clavis2) employing such SPDs. Finally, we review the experimental feasibility of Trojan-horse attacks. In the case of Clavis2, the objective is to read Bob's phase modulator to acquire knowledge of his basis choice as this information suffices for constructing the raw key in the Scarani-Acin-Ribordy-Gisin 2004 (SARG04) protocol. We work in close collaboration with ID Quantique and for all these loopholes, we notified them in advance. Wherever possible, we or ID Quantique proposed countermeasures and they implemented suitable patches and upgrade their systems.

A Framework for Human Performance Criteria for Advanced Reactor Operational Concepts

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jacques V Hugo; David I Gertman; Jeffrey C Joe

2014-08-01

This report supports the determination of new Operational Concept models needed in support of the operational design of new reactors. The objective of this research is to establish the technical bases for human performance and human performance criteria frameworks, models, and guidance for operational concepts for advanced reactor designs. The report includes a discussion of operating principles for advanced reactors, the human performance issues and requirements for human performance based upon work domain analysis and current regulatory requirements, and a description of general human performance criteria. The major findings and key observations to date are that there is some operatingmore » experience that informs operational concepts for baseline designs for SFR and HGTRs, with the Experimental Breeder Reactor-II (EBR-II) as a best-case predecessor design. This report summarizes the theoretical and operational foundations for the development of a framework and model for human performance criteria that will influence the development of future Operational Concepts. The report also highlights issues associated with advanced reactor design and clarifies and codifies the identified aspects of technology and operating scenarios.« less

A Team, Case-based Examination and Its Impact on Student Performance in a Patient Safety and Informatics Course

PubMed Central

Etheridge, Kierstan; DeLellis, Teresa

2017-01-01

Objective. To describe the redesigned assessment plan for a patient safety and informatics course and assess student pharmacist performance and perceptions. Methods. The final examination of a patient safety course was redesigned from traditional multiple choice and short answer to team-based, open-ended, and case-based. Faculty for each class session developed higher level activities, focused on developing key skills or attitudes deemed essential for practice, for a progressive patient case consisting of nine activities. Student performance and perceptions were analyzed with pre- and post-surveys using 5-point scales. Results. Mean performance on the examination was 93.6%; median scores for each assessed course outcome ranged from 90% to 100%. Eighty-five percent of students completed both surveys. Confidence performing skills and demonstrating attitudes improved for each item on post-survey compared with pre-survey. Eighty-one percent of students indicated the experience of taking the examination was beneficial for their professional development. Conclusion. A team, case-based examination was associated with high student performance and improved self-confidence in performing medication safety-related skills. PMID:28970618

Nonprobability Web Surveys to Measure Sexual Behaviors and Attitudes in the General Population: A Comparison With a Probability Sample Interview Survey

PubMed Central

Burkill, Sarah; Couper, Mick P; Conrad, Frederick; Clifton, Soazig; Tanton, Clare; Phelps, Andrew; Datta, Jessica; Mercer, Catherine H; Sonnenberg, Pam; Prah, Philip; Mitchell, Kirstin R; Wellings, Kaye; Johnson, Anne M; Copas, Andrew J

2014-01-01

Background Nonprobability Web surveys using volunteer panels can provide a relatively cheap and quick alternative to traditional health and epidemiological surveys. However, concerns have been raised about their representativeness. Objective The aim was to compare results from different Web panels with a population-based probability sample survey (n=8969 aged 18-44 years) that used computer-assisted self-interview (CASI) for sensitive behaviors, the third British National Survey of Sexual Attitudes and Lifestyles (Natsal-3). Methods Natsal-3 questions were included on 4 nonprobability Web panel surveys (n=2000 to 2099), 2 using basic quotas based on age and sex, and 2 using modified quotas based on additional variables related to key estimates. Results for sociodemographic characteristics were compared with external benchmarks and for sexual behaviors and opinions with Natsal-3. Odds ratios (ORs) were used to express differences between the benchmark data and each survey for each variable of interest. A summary measure of survey performance was the average absolute OR across variables. Another summary measure was the number of key estimates for which the survey differed significantly (at the 5% level) from the benchmarks. Results For sociodemographic variables, the Web surveys were less representative of the general population than Natsal-3. For example, for men, the average absolute OR for Natsal-3 was 1.14, whereas for the Web surveys the average absolute ORs ranged from 1.86 to 2.30. For all Web surveys, approximately two-thirds of the key estimates of sexual behaviors were different from Natsal-3 and the average absolute ORs ranged from 1.32 to 1.98. Differences were appreciable even for questions asked by CASI in Natsal-3. No single Web survey performed consistently better than any other did. Modified quotas slightly improved results for men, but not for women. Conclusions Consistent with studies from other countries on less sensitive topics, volunteer Web panels provided appreciably biased estimates. The differences seen with Natsal-3 CASI questions, where mode effects may be similar, suggest a selection bias in the Web surveys. The use of more complex quotas may lead to some improvement, but many estimates are still likely to differ. Volunteer Web panels are not recommended if accurate prevalence estimates for the general population are a key objective. PMID:25488851

Approach to adolescent suicide prevention

PubMed Central

Kostenuik, Marcia; Ratnapalan, Mohana

2010-01-01

Abstract OBJECTIVE To provide family physicians with an approach to suicide prevention in youth. SOURCES OF INFORMATION A literature review was performed using Ovid MEDLINE with the key words suicide, attempted suicide, and evaluation studies or program evaluation, adolescent. MAIN MESSAGE Youth suicide might be prevented by earlier recognition and treatment of mental illness. Family physicians can and should screen for mental illness in youth; there are many diagnostic and treatment resources available to assist with this. CONCLUSION Earlier detection and treatment of mental illness are the most important ways family physicians can reduce morbidity and mortality for youth who are contemplating suicide. PMID:20705879

Target-based coherent beam combining of an optical phased array fed by a broadband laser source

NASA Astrophysics Data System (ADS)

Hyde, Milo W., IV; McCrae, Jack E.; Tyler, Glenn A.

2017-11-01

The target-based phasing of an optical phased array (OPA) fed by a broadband master oscillator laser source is investigated. The specific scenario examined here considers an OPA phasing through atmospheric turbulence on a rough curved object. An analytical expression for the detected or received intensity is derived. Gleaned from this expression are the conditions under which target-based phasing is possible. A detailed OPA wave optics simulation is performed to validate the theoretical findings. Key aspects of the simulation set-up as well as the results are thoroughly discussed.

Rotorcraft flight-propulsion control integration: An eclectic design concept

NASA Technical Reports Server (NTRS)

Mihaloew, James R.; Ballin, Mark G.; Ruttledge, D. C. G.

1988-01-01

The NASA Ames and Lewis Research Centers, in conjunction with the Army Research and Technology Laboratories, have initiated and partially completed a joint research program focused on improving the performance, maneuverability, and operating characteristics of rotorcraft by integrating the flight and propulsion controls. The background of the program, its supporting programs, its goals and objectives, and an approach to accomplish them are discussed. Results of the modern control governor design of the General Electric T700 engine and the Rotorcraft Integrated Flight-Propulsion Control Study, which were key elements of the program, are also presented.

JWST and Exoplanets

NASA Technical Reports Server (NTRS)

Mather, John C.

2009-01-01

The James Webb Space Telescope is on track for a launch in 2013. The author reviews the status and progress on the key hardware. The first primary mirror segments are already at MSFC for cryogenic tests, the mid IR instrument (MIRI) has already had successful tests of the engineering model, and the detectors are showing excellent performance. The author also describes the scientific objectives of the mission, with emphasis on the predicted capabilities for observing planets by the transit technique and through direct imaging. Recent direct observations of planets by HST and by adaptive optics from the ground have shown that, under favorable circumstances, much can be learned.

The Athena X-ray Integral Field Unit (X-IFU)

NASA Astrophysics Data System (ADS)

Pajot, F.; Barret, D.; Lam-Trong, T.; den Herder, J.-W.; Piro, L.; Cappi, M.; Huovelin, J.; Kelley, R.; Mas-Hesse, J. M.; Mitsuda, K.; Paltani, S.; Rauw, G.; Rozanska, A.; Wilms, J.; Barbera, M.; Douchin, F.; Geoffray, H.; den Hartog, R.; Kilbourne, C.; Le Du, M.; Macculi, C.; Mesnager, J.-M.; Peille, P.

2018-04-01

The X-ray Integral Field Unit (X-IFU) of the Advanced Telescope for High-ENergy Astrophysics (Athena) large-scale mission of ESA will provide spatially resolved high-resolution X-ray spectroscopy from 0.2 to 12 keV, with 5^' ' } pixels over a field of view of 5 arc minute equivalent diameter and a spectral resolution of 2.5 eV (FWHM) up to 7 keV. The core scientific objectives of Athena drive the main performance parameters of the X-IFU. We present the current reference configuration of the X-IFU, and the key issues driving the design of the instrument.

Preliminary Evaluation of Air Quality Model Performance Utilizing Measurements at the University of Houston Moody Tower and others during the TexAQS-II

NASA Astrophysics Data System (ADS)

Byun, D. W.; Rappenglueck, B.; Lefer, B.

2007-12-01

Accurate meteorological and photochemical modeling efforts are necessary to understand the measurements made during the Texas Air Quality Study (TexAQS-II). The main objective of the study is to understand the meteorological and chemical processes of high ozone and regional haze events in the Eastern Texas, including the Houston-Galveston metropolitan area. Real-time and retrospective meteorological and photochemical model simulations were performed to study key physical and chemical processes in the Houston Galveston Area. In particular, the Vertical Mixing Experiment (VME) at the University of Houston campus was performed on selected days during the TexAQS-II. Results of the MM5 meteorological model and CMAQ air quality model simulations were compared with the VME and other TexAQS-II measurements to understand the interaction of the boundary layer dynamics and photochemical evolution affecting Houston air quality.

Computational methods in the development of a knowledge-based system for the prediction of solid catalyst performance.

PubMed

Procelewska, Joanna; Galilea, Javier Llamas; Clerc, Frederic; Farrusseng, David; Schüth, Ferdi

2007-01-01

The objective of this work is the construction of a correlation between characteristics of heterogeneous catalysts, encoded in a descriptor vector, and their experimentally measured performances in the propene oxidation reaction. In this paper the key issue in the modeling process, namely the selection of adequate input variables, is explored. Several data-driven feature selection strategies were applied in order to obtain an estimate of the differences in variance and information content of various attributes, furthermore to compare their relative importance. Quantitative property activity relationship techniques using probabilistic neural networks have been used for the creation of various semi-empirical models. Finally, a robust classification model, assigning selected attributes of solid compounds as input to an appropriate performance class in the model reaction was obtained. It has been evident that the mathematical support for the primary attributes set proposed by chemists can be highly desirable.

FY 1999 Annual Self-Evaluation Report of the Pacific Northwest National Laboratory

DOE Office of Scientific and Technical Information (OSTI.GOV)

Randy R. LaBarge

1999-11-05

This is a report of the Pacific Northwest National Laboratory's (Pacific Northwest's) FY1999 Annual Self-Evaluation Report. This report summarizes our progress toward accomplishment of the critical outcomes, objectives, and performance indicators as delineated in the FY1999 Performance Evaluation & Fee Agreement. It also summarizes our analysis of the results of Pacific Northwest's Division and Directorate annual self-assessments, and the implementation of our key operational improvement initiatives. Together, these provide an indication of how well we have used our Integrated Assessment processes to identify and plan improvements for FY2000. As you review the report you will find areas of significantly positivemore » progress; you will also note areas where I believe the Laboratory could make improvements. Overall, however, I believe you will be quite pleased to note that we have maintained, or exceeded, the high standards of performance we have set for the Laboratory.« less

48 CFR 2452.237-70 - Key personnel.

Code of Federal Regulations, 2010 CFR

2010-10-01

... contracts when it is necessary for contract performance to identify the contractor's key personnel: Key... perform as follows: [List Key Personnel and/or positions, and tasks, percentage of effort, number of hours...

A Verification System for Distributed Objects with Asynchronous Method Calls

NASA Astrophysics Data System (ADS)

Ahrendt, Wolfgang; Dylla, Maximilian

We present a verification system for Creol, an object-oriented modeling language for concurrent distributed applications. The system is an instance of KeY, a framework for object-oriented software verification, which has so far been applied foremost to sequential Java. Building on KeY characteristic concepts, like dynamic logic, sequent calculus, explicit substitutions, and the taclet rule language, the system presented in this paper addresses functional correctness of Creol models featuring local cooperative thread parallelism and global communication via asynchronous method calls. The calculus heavily operates on communication histories which describe the interfaces of Creol units. Two example scenarios demonstrate the usage of the system.

Summary on several key techniques in 3D geological modeling.

PubMed

Mei, Gang

2014-01-01

Several key techniques in 3D geological modeling including planar mesh generation, spatial interpolation, and surface intersection are summarized in this paper. Note that these techniques are generic and widely used in various applications but play a key role in 3D geological modeling. There are two essential procedures in 3D geological modeling: the first is the simulation of geological interfaces using geometric surfaces and the second is the building of geological objects by means of various geometric computations such as the intersection of surfaces. Discrete geometric surfaces that represent geological interfaces can be generated by creating planar meshes first and then spatially interpolating; those surfaces intersect and then form volumes that represent three-dimensional geological objects such as rock bodies. In this paper, the most commonly used algorithms of the key techniques in 3D geological modeling are summarized.

Effects of Viscosity on the Performance of Air-Powered Liquid Jet Injectors

NASA Astrophysics Data System (ADS)

Portaro, Rocco; Jaber, Hadi; Ng, Hoi Dick

2017-11-01

Drug delivery without the use of hypodermic needles has been a long-term objective within the medical field. This study focuses on observing the effects of drug viscosity on injector performance for air-powered liquid jet injectors, as well as the viability of using this technology for delivering viscous-type medications such as monoclonal antibodies. The experiments are conducted through the use of a prototype injector which allows key parameters such as driver pressure, injection volume and nozzle size to be varied. Different viscosities which range from 0.9 cP to 87 cP are obtained by using a water-glycerol mix. The liquid jets emanating from the injector are assessed using high speed photography as well as a pressure transducer. Experimental findings are then compared to a CFD model which considered experimental geometry and parameters. The results of this study highlight the effect of viscosity on the operating pressure of the injector and the reduction in jet stagnation pressure. It also illustrates improved jet confinement as viscosity is increased, a finding which is in line with the numerical model, and should play a key role in improving the device's characteristics for puncturing skin.

Enrichment Assay Methods Development for the Integrated Cylinder Verification System

DOE Office of Scientific and Technical Information (OSTI.GOV)

Smith, Leon E.; Misner, Alex C.; Hatchell, Brian K.

2009-10-22

International Atomic Energy Agency (IAEA) inspectors currently perform periodic inspections at uranium enrichment plants to verify UF6 cylinder enrichment declarations. Measurements are typically performed with handheld high-resolution sensors on a sampling of cylinders taken to be representative of the facility's entire product-cylinder inventory. Pacific Northwest National Laboratory (PNNL) is developing a concept to automate the verification of enrichment plant cylinders to enable 100 percent product-cylinder verification and potentially, mass-balance calculations on the facility as a whole (by also measuring feed and tails cylinders). The Integrated Cylinder Verification System (ICVS) could be located at key measurement points to positively identify eachmore » cylinder, measure its mass and enrichment, store the collected data in a secure database, and maintain continuity of knowledge on measured cylinders until IAEA inspector arrival. The three main objectives of this FY09 project are summarized here and described in more detail in the report: (1) Develop a preliminary design for a prototype NDA system, (2) Refine PNNL's MCNP models of the NDA system, and (3) Procure and test key pulse-processing components. Progress against these tasks to date, and next steps, are discussed.« less

Binocular stereo matching method based on structure tensor

NASA Astrophysics Data System (ADS)

Song, Xiaowei; Yang, Manyi; Fan, Yubo; Yang, Lei

2016-10-01

In a binocular visual system, to recover the three-dimensional information of the object, the most important step is to acquire matching points. Structure tensor is the vector representation of each point in its local neighborhood. Therefore, structure tensor performs well in region detection of local structure, and it is very suitable for detecting specific graphics such as pedestrians, cars and road signs in the image. In this paper, the structure tensor is combined with the luminance information to form the extended structure tensor. The directional derivatives of luminance in x and y directions are calculated, so that the local structure of the image is more prominent. Meanwhile, the Euclidean distance between the eigenvectors of key points is used as the similarity determination metric of key points in the two images. By matching, the coordinates of the matching points in the detected target are precisely acquired. In this paper, experiments were performed on the captured left and right images. After the binocular calibration, image matching was done to acquire the matching points, and then the target depth was calculated according to these matching points. By comparison, it is proved that the structure tensor can accurately acquire the matching points in binocular stereo matching.

Direct metal laser sintering titanium dental implants: a review of the current literature.

PubMed

Mangano, F; Chambrone, L; van Noort, R; Miller, C; Hatton, P; Mangano, C

2014-01-01

Statement of Problem. Direct metal laser sintering (DMLS) is a technology that allows fabrication of complex-shaped objects from powder-based materials, according to a three-dimensional (3D) computer model. With DMLS, it is possible to fabricate titanium dental implants with an inherently porous surface, a key property required of implantation devices. Objective. The aim of this review was to evaluate the evidence for the reliability of DMLS titanium dental implants and their clinical and histologic/histomorphometric outcomes, as well as their mechanical properties. Materials and Methods. Electronic database searches were performed. Inclusion criteria were clinical and radiographic studies, histologic/histomorphometric studies in humans and animals, mechanical evaluations, and in vitro cell culture studies on DMLS titanium implants. Meta-analysis could be performed only for randomized controlled trials (RCTs); to evaluate the methodological quality of observational human studies, the Newcastle-Ottawa scale (NOS) was used. Results. Twenty-seven studies were included in this review. No RCTs were found, and meta-analysis could not be performed. The outcomes of observational human studies were assessed using the NOS: these studies showed medium methodological quality. Conclusions. Several studies have demonstrated the potential for the use of DMLS titanium implants. However, further studies that demonstrate the benefits of DMLS implants over conventional implants are needed.

Direct Metal Laser Sintering Titanium Dental Implants: A Review of the Current Literature

PubMed Central

Mangano, F.; Chambrone, L.; van Noort, R.; Miller, C.; Hatton, P.; Mangano, C.

2014-01-01

Statement of Problem. Direct metal laser sintering (DMLS) is a technology that allows fabrication of complex-shaped objects from powder-based materials, according to a three-dimensional (3D) computer model. With DMLS, it is possible to fabricate titanium dental implants with an inherently porous surface, a key property required of implantation devices. Objective. The aim of this review was to evaluate the evidence for the reliability of DMLS titanium dental implants and their clinical and histologic/histomorphometric outcomes, as well as their mechanical properties. Materials and Methods. Electronic database searches were performed. Inclusion criteria were clinical and radiographic studies, histologic/histomorphometric studies in humans and animals, mechanical evaluations, and in vitro cell culture studies on DMLS titanium implants. Meta-analysis could be performed only for randomized controlled trials (RCTs); to evaluate the methodological quality of observational human studies, the Newcastle-Ottawa scale (NOS) was used. Results. Twenty-seven studies were included in this review. No RCTs were found, and meta-analysis could not be performed. The outcomes of observational human studies were assessed using the NOS: these studies showed medium methodological quality. Conclusions. Several studies have demonstrated the potential for the use of DMLS titanium implants. However, further studies that demonstrate the benefits of DMLS implants over conventional implants are needed. PMID:25525434

[Understanding the symbolic values of Japanese onomatopoeia: comparison of Japanese and Chinese speakers].

PubMed

Haryu, Etsuko; Zhao, Lihua

2007-10-01

Do non-native speakers of the Japanese language understand the symbolic values of Japanese onomatopoeia matching a voiced/unvoiced consonant with a big/small sound made by a big/small object? In three experiments, participants who were native speakers of Japanese, Japanese-learning Chinese, or Chinese without knowledge of the Japanese language were shown two pictures. One picture was of a small object making a small sound, such as a small vase being broken, and the other was of a big object making a big sound, such as a big vase being broken. Participants were presented with two novel onomatopoetic words with voicing contrasts, e.g.,/dachan/vs./tachan/, and were told that each word corresponded to one of the two pictures. They were then asked to match the words to the corresponding pictures. Chinese without knowledge of Japanese performed only at chance level, whereas Japanese and Japanese-learning Chinese successfully matched a voiced/unvoiced consonant with a big/small object respectively. The results suggest that the key to understanding the symbolic values of voicing contrasts in Japanese onomatopoeia is some basic knowledge that is intrinsic to the Japanese language.

The Evolution of System Safety at NASA

NASA Technical Reports Server (NTRS)

Dezfuli, Homayoon; Everett, Chris; Groen, Frank

2014-01-01

The NASA system safety framework is in the process of change, motivated by the desire to promote an objectives-driven approach to system safety that explicitly focuses system safety efforts on system-level safety performance, and serves to unify, in a purposeful manner, safety-related activities that otherwise might be done in a way that results in gaps, redundancies, or unnecessary work. An objectives-driven approach to system safety affords more flexibility to determine, on a system-specific basis, the means by which adequate safety is achieved and verified. Such flexibility and efficiency is becoming increasingly important in the face of evolving engineering modalities and acquisition models, where, for example, NASA will increasingly rely on commercial providers for transportation services to low-earth orbit. A key element of this objectives-driven approach is the use of the risk-informed safety case (RISC): a structured argument, supported by a body of evidence, that provides a compelling, comprehensible and valid case that a system is or will be adequately safe for a given application in a given environment. The RISC addresses each of the objectives defined for the system, providing a rational basis for making informed risk acceptance decisions at relevant decision points in the system life cycle.

Characteristic sounds facilitate visual search

PubMed Central

Iordanescu, Lucica; Guzman-Martinez, Emmanuel; Grabowecky, Marcia; Suzuki, Satoru

2009-01-01

In a natural environment, objects that we look for often make characteristic sounds. A hiding cat may meow, or the keys in the cluttered drawer may jingle when moved. Using a visual search paradigm, we demonstrated that characteristic sounds facilitated visual localization of objects, even when the sounds carried no location information. For example, finding a cat was faster when participants heard a meow sound. In contrast, sounds had no effect when participants searched for names rather than pictures of objects. For example, hearing “meow” did not facilitate localization of the word cat. These results suggest that characteristic sounds cross-modally enhance visual (rather than conceptual) processing of the corresponding objects. Our behavioral demonstration of object-based cross-modal enhancement complements the extensive literature on space-based cross-modal interactions. When looking for your keys next time, you might want to play jingling sounds. PMID:18567253

Transpiration cooled throat for hydrocarbon rocket engines

NASA Technical Reports Server (NTRS)

May, Lee R.; Burkhardt, Wendel M.

1991-01-01

The objective for the Transpiration Cooled Throat for Hydrocarbon Rocket Engines Program was to characterize the use of hydrocarbon fuels as transpiration coolants for rocket nozzle throats. The hydrocarbon fuels investigated in this program were RP-1 and methane. To adequately characterize the above transpiration coolants, a program was planned which would (1) predict engine system performance and life enhancements due to transpiration cooling of the throat region using analytical models, anchored with available data; (2) a versatile transpiration cooled subscale rocket thrust chamber was designed and fabricated; (3) the subscale thrust chamber was tested over a limited range of conditions, e.g., coolant type, chamber pressure, transpiration cooled length, and coolant flow rate; and (4) detailed data analyses were conducted to determine the relationship between the key performance and life enhancement variables.

Approaches in highly parameterized inversion: TSPROC, a general time-series processor to assist in model calibration and result summarization

USGS Publications Warehouse

Westenbroek, Stephen M.; Doherty, John; Walker, John F.; Kelson, Victor A.; Hunt, Randall J.; Cera, Timothy B.

2012-01-01

The TSPROC (Time Series PROCessor) computer software uses a simple scripting language to process and analyze time series. It was developed primarily to assist in the calibration of environmental models. The software is designed to perform calculations on time-series data commonly associated with surface-water models, including calculation of flow volumes, transformation by means of basic arithmetic operations, and generation of seasonal and annual statistics and hydrologic indices. TSPROC can also be used to generate some of the key input files required to perform parameter optimization by means of the PEST (Parameter ESTimation) computer software. Through the use of TSPROC, the objective function for use in the model-calibration process can be focused on specific components of a hydrograph.

Parametric Studies of Flow Separation using Air Injection

NASA Technical Reports Server (NTRS)

Zhang, Wei

2004-01-01

Boundary Layer separation causes the airfoil to stall and therefore imposes dramatic performance degradation on the airfoil. In recent years, flow separation control has been one of the active research areas in the field of aerodynamics due to its promising performance improvements on the lifting device. These active flow separation control techniques include steady and unsteady air injection as well as suction on the airfoil surface etc. This paper will be focusing on the steady and unsteady air injection on the airfoil. Although wind tunnel experiments revealed that the performance improvements on the airfoil using injection techniques, the details of how the key variables such as air injection slot geometry and air injection angle etc impact the effectiveness of flow separation control via air injection has not been studied. A parametric study of both steady and unsteady air injection active flow control will be the main objective for this summer. For steady injection, the key variables include the slot geometry, orientation, spacing, air injection velocity as well as the injection angle. For unsteady injection, the injection frequency will also be investigated. Key metrics such as lift coefficient, drag coefficient, total pressure loss and total injection mass will be used to measure the effectiveness of the control technique. A design of experiments using the Box-Behnken Design is set up in order to determine how each of the variables affects each of the key metrics. Design of experiment is used so that the number of experimental runs will be at minimum and still be able to predict which variables are the key contributors to the responses. The experiments will then be conducted in the 1ft by 1ft wind tunnel according to the design of experiment settings. The data obtained from the experiments will be imported into JMP, statistical software, to generate sets of response surface equations which represent the statistical empirical model for each of the metrics as a function of the key variables. Next, the variables such as the slot geometry can be optimized using the build-in optimizer within JMP. Finally, a wind tunnel testing will be conducted using the optimized slot geometry and other key variables to verify the empirical statistical model. The long term goal for this effort is to assess the impacts of active flow control using air injection at system level as one of the task plan included in the NASAs URETI program with Georgia Institute of Technology.

WE-E-217A-02: Methodologies for Evaluation of Standalone CAD System Performance.

PubMed

Sahiner, B

2012-06-01

Standalone performance evaluation of a CAD system provides information about the abnormality detection or classification performance of the computerized system alone. Although the performance of the reader with CAD is the final step in CAD system assessment, standalone performance evaluation is an important component for several reasons: First, standalone evaluation informs the reader about the performance level of the CAD system and may have an impact on how the reader uses the system. Second, it provides essential information to the system designer for algorithm optimization during system development. Third, standalone evaluation can provide a detailed description of algorithm performance (e.g., on subgroups of the population) because a larger data set with more samples from different subgroups can be included in standalone studies compared to reader studies. Proper standalone evaluation of a CAD system involves a number of key components, some of which are shared with the assessment of reader performance with CAD. These include (1) selection of a test data set that allows performance assessment with little or no bias and acceptable uncertainty; (2) a reference standard that indicates disease status as well as the location and extent of disease; (3) a clearly defined method for labeling each CAD mark as a true-positive or false-positive; and (4) a properly selected set of metrics to summarize the accuracy of the computer marks and their corresponding scores. In this lecture, we will discuss various approaches for the key components of standalone CAD performance evaluation listed above, and present some of the recommendations and opinions from the AAPM CAD subcommittee on these issues. Learning Objectives 1. Identify basic components and metrics in the assessment of standalone CAD systems 2. Understand how each component may affect the assessed performance 3. Learn about AAPM CAD subcommittee's opinions and recommendations on factors and metrics related to the evaluation of standalone CAD system performance. © 2012 American Association of Physicists in Medicine.

Empirical Analysis of Optical Attenuator Performance in Quantum Key Distribution Systems Using a Particle Model

DTIC Science & Technology

2012-03-01

EMPIRICAL ANALYSIS OF OPTICAL ATTENUATOR PERFORMANCE IN QUANTUM KEY DISTRIBUTION SYSTEMS USING A...DISTRIBUTION IS UNLIMITED AFIT/GCS/ENG/12-01 EMPIRICAL ANALYSIS OF OPTICAL ATTENUATOR PERFORMANCE IN QUANTUM KEY DISTRIBUTION SYSTEMS USING ...challenging as the complexity of actual implementation specifics are considered. Two components common to most quantum key distribution

Benchmarking in pathology: development of a benchmarking complexity unit and associated key performance indicators.

PubMed

Neil, Amanda; Pfeffer, Sally; Burnett, Leslie

2013-01-01

This paper details the development of a new type of pathology laboratory productivity unit, the benchmarking complexity unit (BCU). The BCU provides a comparative index of laboratory efficiency, regardless of test mix. It also enables estimation of a measure of how much complex pathology a laboratory performs, and the identification of peer organisations for the purposes of comparison and benchmarking. The BCU is based on the theory that wage rates reflect productivity at the margin. A weighting factor for the ratio of medical to technical staff time was dynamically calculated based on actual participant site data. Given this weighting, a complexity value for each test, at each site, was calculated. The median complexity value (number of BCUs) for that test across all participating sites was taken as its complexity value for the Benchmarking in Pathology Program. The BCU allowed implementation of an unbiased comparison unit and test listing that was found to be a robust indicator of the relative complexity for each test. Employing the BCU data, a number of Key Performance Indicators (KPIs) were developed, including three that address comparative organisational complexity, analytical depth and performance efficiency, respectively. Peer groups were also established using the BCU combined with simple organisational and environmental metrics. The BCU has enabled productivity statistics to be compared between organisations. The BCU corrects for differences in test mix and workload complexity of different organisations and also allows for objective stratification into peer groups.

Acquired prosopagnosia without word recognition deficits.

PubMed

Susilo, Tirta; Wright, Victoria; Tree, Jeremy J; Duchaine, Bradley

2015-01-01

It has long been suggested that face recognition relies on specialized mechanisms that are not involved in visual recognition of other object categories, including those that require expert, fine-grained discrimination at the exemplar level such as written words. But according to the recently proposed many-to-many theory of object recognition (MTMT), visual recognition of faces and words are carried out by common mechanisms [Behrmann, M., & Plaut, D. C. ( 2013 ). Distributed circuits, not circumscribed centers, mediate visual recognition. Trends in Cognitive Sciences, 17, 210-219]. MTMT acknowledges that face and word recognition are lateralized, but posits that the mechanisms that predominantly carry out face recognition still contribute to word recognition and vice versa. MTMT makes a key prediction, namely that acquired prosopagnosics should exhibit some measure of word recognition deficits. We tested this prediction by assessing written word recognition in five acquired prosopagnosic patients. Four patients had lesions limited to the right hemisphere while one had bilateral lesions with more pronounced lesions in the right hemisphere. The patients completed a total of seven word recognition tasks: two lexical decision tasks and five reading aloud tasks totalling more than 1200 trials. The performances of the four older patients (3 female, age range 50-64 years) were compared to those of 12 older controls (8 female, age range 56-66 years), while the performances of the younger prosopagnosic (male, 31 years) were compared to those of 14 younger controls (9 female, age range 20-33 years). We analysed all results at the single-patient level using Crawford's t-test. Across seven tasks, four prosopagnosics performed as quickly and accurately as controls. Our results demonstrate that acquired prosopagnosia can exist without word recognition deficits. These findings are inconsistent with a key prediction of MTMT. They instead support the hypothesis that face recognition is carried out by specialized mechanisms that do not contribute to recognition of written words.

NUMERICAL FLOW AND TRANSPORT SIMULATIONS SUPPORTING THE SALTSTONE FACILITY PERFORMANCE ASSESSMENT

DOE Office of Scientific and Technical Information (OSTI.GOV)

Flach, G.

2009-02-28

The Saltstone Disposal Facility Performance Assessment (PA) is being revised to incorporate requirements of Section 3116 of the Ronald W. Reagan National Defense Authorization Act for Fiscal Year 2005 (NDAA), and updated data and understanding of vault performance since the 1992 PA (Cook and Fowler 1992) and related Special Analyses. A hybrid approach was chosen for modeling contaminant transport from vaults and future disposal cells to exposure points. A higher resolution, largely deterministic, analysis is performed on a best-estimate Base Case scenario using the PORFLOW numerical analysis code. a few additional sensitivity cases are simulated to examine alternative scenarios andmore » parameter settings. Stochastic analysis is performed on a simpler representation of the SDF system using the GoldSim code to estimate uncertainty and sensitivity about the Base Case. This report describes development of PORFLOW models supporting the SDF PA, and presents sample results to illustrate model behaviors and define impacts relative to key facility performance objectives. The SDF PA document, when issued, should be consulted for a comprehensive presentation of results.« less

Comparison of visual and emotional continuous performance test related to sequence of presentation, gender and age.

PubMed

Markovska-Simoska, S; Pop-Jordanova, N

2009-07-01

(Full text is available at http://www.manu.edu.mk/prilozi). Continous Performance Tests (CPTs) form a group of paradigms for the evaluation of attention and, to a lesser degree, the response inhibition (or disinhibition) component of executive control. The object of this study was to compare performance on a CPT using both visual and emotional tasks in 46 normal adult subjects. In particular, it was to examine the effects of the type of task (VCPT or ECPT), sequence of presentation, and gender/age influence on performance as measured errors of omission, errors of commission, reaction time and variation of reaction time. From the results we can assume that there are significantly worse performance parameters for ECPT than VCPT tasks, with a probable explanation of the influence of emotional stimuli on attention and information-processing and no significant effect of order of presentation and gender on performance. Significant differences with more omission errors for older groups were obtained, showing better attention in younger subjects. Key words: VCPT, ECPT, omission errors, commission errors, reaction time, variation of reaction time, normal adults.

Initiating Event Analysis of a Lithium Fluoride Thorium Reactor

NASA Astrophysics Data System (ADS)

Geraci, Nicholas Charles

The primary purpose of this study is to perform an Initiating Event Analysis for a Lithium Fluoride Thorium Reactor (LFTR) as the first step of a Probabilistic Safety Assessment (PSA). The major objective of the research is to compile a list of key initiating events capable of resulting in failure of safety systems and release of radioactive material from the LFTR. Due to the complex interactions between engineering design, component reliability and human reliability, probabilistic safety assessments are most useful when the scope is limited to a single reactor plant. Thus, this thesis will study the LFTR design proposed by Flibe Energy. An October 2015 Electric Power Research Institute report on the Flibe Energy LFTR asked "what-if?" questions of subject matter experts and compiled a list of key hazards with the most significant consequences to the safety or integrity of the LFTR. The potential exists for unforeseen hazards to pose additional risk for the LFTR, but the scope of this thesis is limited to evaluation of those key hazards already identified by Flibe Energy. These key hazards are the starting point for the Initiating Event Analysis performed in this thesis. Engineering evaluation and technical study of the plant using a literature review and comparison to reference technology revealed four hazards with high potential to cause reactor core damage. To determine the initiating events resulting in realization of these four hazards, reference was made to previous PSAs and existing NRC and EPRI initiating event lists. Finally, fault tree and event tree analyses were conducted, completing the logical classification of initiating events. Results are qualitative as opposed to quantitative due to the early stages of system design descriptions and lack of operating experience or data for the LFTR. In summary, this thesis analyzes initiating events using previous research and inductive and deductive reasoning through traditional risk management techniques to arrive at a list of key initiating events that can be used to address vulnerabilities during the design phases of LFTR development.

Evidence for repetitive load in the trapezius muscle during a tapping task.

PubMed

Tomatis, L; Müller, C; Nakaseko, M; Läubli, T

2012-08-01

Many studies describe the trapezius muscle activation pattern during repetitive key-tapping focusing on continuous activation. The objectives of this study were to determine whether the upper trapezius is phasically active during supported key tapping, whether this activity is cross-correlated with forearm muscle activity, and whether trapezius activity depends on key characteristic. Thirteen subjects (29.7 ± 11.4 years) were tested. Surface EMG of the finger's extensor and flexor and of the trapezius muscles, as well as the key on-off signal was recorded while the subject performed a 2-min session of key tapping at 4 Hz. The linear envelopes obtained were cut into single tapping cycles extending from one onset to the next onset signal and subsequently time-normalized. Effect size between mean range and maximal standard deviation was calculated to determine as to whether a burst of trapezius muscle activation was present. Cross-correlation was used to determine the time-lag of the activity bursts between forearm and trapezius muscles. For each person the mean and standard deviation of the cross-correlations coefficient between forearm muscles and trapezius were determined. Results showed a burst of activation in the trapezius muscle during most of the tapping cycles. The calculated effect size was ≥0.5 in 67% of the cases. Cross-correlation factors between forearm and trapezius muscle activity were between 0.75 and 0.98 for both extensor and flexor muscles. The cross-correlated phasic trapezius activity did not depend on key characteristics. Trapezius muscle was dynamically active during key tapping; its activity was clearly correlated with forearm muscles' activity.

Distributed Space Mission Design for Earth Observation Using Model-Based Performance Evaluation

NASA Technical Reports Server (NTRS)

Nag, Sreeja; LeMoigne-Stewart, Jacqueline; Cervantes, Ben; DeWeck, Oliver

2015-01-01

Distributed Space Missions (DSMs) are gaining momentum in their application to earth observation missions owing to their unique ability to increase observation sampling in multiple dimensions. DSM design is a complex problem with many design variables, multiple objectives determining performance and cost and emergent, often unexpected, behaviors. There are very few open-access tools available to explore the tradespace of variables, minimize cost and maximize performance for pre-defined science goals, and therefore select the most optimal design. This paper presents a software tool that can multiple DSM architectures based on pre-defined design variable ranges and size those architectures in terms of predefined science and cost metrics. The tool will help a user select Pareto optimal DSM designs based on design of experiments techniques. The tool will be applied to some earth observation examples to demonstrate its applicability in making some key decisions between different performance metrics and cost metrics early in the design lifecycle.

Space Debris Removal Using Multi-Mission Modular Spacecraft

NASA Astrophysics Data System (ADS)

Savioli, L.; Francesconi, A.; Maggi, F.; Olivieri, L.; Lorenzini, E.; Pardini, C.

2013-08-01

The study and development of ADR missions in LEO have become an issue of topical interest to the attention of the space community since the future space flight activities could be threatened by collisional cascade events. This paper presents the analysis of an ADR mission scenario where modular remover kits are employed to de-orbit some selected debris in SSO, while a distinct space tug performs the orbital transfers and rendezvous manoeuvres, and installs the remover kits on the client debris. Electro-dynamic tether and electric propulsion are considered as de-orbiting alternatives, while chemical propulsion is employed for the space tug. The total remover mass and de-orbiting time are identified as key parameters to compare the performances of the two de-orbiting options, while an optimization of the ΔV required to move between five selected objects is performed for a preliminary design at system level of the space tug. Final controlled re-entry is also considered and performed by means of a hybrid engine.

Requirements for a Hydrogen Powered All-Electric Manned Helicopter

NASA Technical Reports Server (NTRS)

Datta, Anubhav

2012-01-01

The objective of this paper is to set propulsion system targets for an all-electric manned helicopter of ultra-light utility class to achieve performance comparable to combustion engines. The approach is to begin with a current two-seat helicopter (Robinson R 22 Beta II-like), design an all-electric power plant as replacement for its existing piston engine, and study performance of the new all-electric aircraft. The new power plant consists of high-pressure Proton Exchange Membrane fuel cells, hydrogen stored in 700 bar type-4 tanks, lithium-ion batteries, and an AC synchronous permanent magnet motor. The aircraft and the transmission are assumed to remain the same. The paper surveys the state of the art in each of these areas, synthesizes a power plant using best available technologies in each, examines the performance achievable by such a power plant, identifies key barriers, and sets future technology targets to achieve performance at par with current internal combustion engines.

Environmental scanning as a moderator of strategy-performance relationships: an empirical analysis of physical therapy facilities.

PubMed

Davis, Mark A; Miles, Grant; McDowell, William C

2008-05-01

To date, strategic management research in health care is largely confined to the acute care sector of the industry. This research examines the linkages among environmental scanning, competitive strategy and performance in physical therapy facilities. Nontrivial differences between acute and subacute care firms suggest the role of environmental scanning may change in non-acute care settings. Consistent with previous research, these results indicate that the frequency of internal and external scanning is related to the strategic orientation of physical therapy facilities. Contrary to the expectations, broader scope of scanning is positively related to an increasing market-focused and increasing efficiency strategic orientation. A key objective of the research is to test the impact of strategy/scanning alignment on facility performance. These findings support predictions on the moderating role of scanning activities in the strategy-performance relationship. However, a paradoxical pattern of results has possible implications for clinician managers in subacute care settings as well as the interpretation of scanning activities.

Applications of neural networks to landmark detection in 3-D surface data

NASA Astrophysics Data System (ADS)

Arndt, Craig M.

1992-09-01

The problem of identifying key landmarks in 3-dimensional surface data is of considerable interest in solving a number of difficult real-world tasks, including object recognition and image processing. The specific problem that we address in this research is to identify the specific landmarks (anatomical) in human surface data. This is a complex task, currently performed visually by an expert human operator. In order to replace these human operators and increase reliability of the data acquisition, we need to develop a computer algorithm which will utilize the interrelations between the 3-dimensional data to identify the landmarks of interest. The current presentation describes a method for designing, implementing, training, and testing a custom architecture neural network which will perform the landmark identification task. We discuss the performance of the net in relationship to human performance on the same task and how this net has been integrated with other AI and traditional programming methods to produce a powerful analysis tool for computer anthropometry.

Eye Movements to Pictures Reveal Transient Semantic Activation during Spoken Word Recognition

ERIC Educational Resources Information Center

Yee, Eiling; Sedivy, Julie C.

2006-01-01

Two experiments explore the activation of semantic information during spoken word recognition. Experiment 1 shows that as the name of an object unfolds (e.g., lock), eye movements are drawn to pictorial representations of both the named object and semantically related objects (e.g., key). Experiment 2 shows that objects semantically related to an…

SWCD: a sliding window and self-regulated learning-based background updating method for change detection in videos

NASA Astrophysics Data System (ADS)

Işık, Şahin; Özkan, Kemal; Günal, Serkan; Gerek, Ömer Nezih

2018-03-01

Change detection with background subtraction process remains to be an unresolved issue and attracts research interest due to challenges encountered on static and dynamic scenes. The key challenge is about how to update dynamically changing backgrounds from frames with an adaptive and self-regulated feedback mechanism. In order to achieve this, we present an effective change detection algorithm for pixelwise changes. A sliding window approach combined with dynamic control of update parameters is introduced for updating background frames, which we called sliding window-based change detection. Comprehensive experiments on related test videos show that the integrated algorithm yields good objective and subjective performance by overcoming illumination variations, camera jitters, and intermittent object motions. It is argued that the obtained method makes a fair alternative in most types of foreground extraction scenarios; unlike case-specific methods, which normally fail for their nonconsidered scenarios.

A Corticothalamic Circuit Model for Sound Identification in Complex Scenes

PubMed Central

Otazu, Gonzalo H.; Leibold, Christian

2011-01-01

The identification of the sound sources present in the environment is essential for the survival of many animals. However, these sounds are not presented in isolation, as natural scenes consist of a superposition of sounds originating from multiple sources. The identification of a source under these circumstances is a complex computational problem that is readily solved by most animals. We present a model of the thalamocortical circuit that performs level-invariant recognition of auditory objects in complex auditory scenes. The circuit identifies the objects present from a large dictionary of possible elements and operates reliably for real sound signals with multiple concurrently active sources. The key model assumption is that the activities of some cortical neurons encode the difference between the observed signal and an internal estimate. Reanalysis of awake auditory cortex recordings revealed neurons with patterns of activity corresponding to such an error signal. PMID:21931668

Is the picture bizarreness effect a generation effect?

PubMed

Marchal, A; Nicolas, S

2000-08-01

Bizarre stimuli usually facilitate recall compared to common stimuli. This investigation explored the so-called bizarreness effect in free recall by using 80 simple line drawings of common objects (common vs bizarre). 64 subjects participated with 16 subjects in each group. Half of the subjects received learning instructions and the other half rated the bizarreness of each drawing. Moreover, drawings were presented either alone or with the name of the object under mixed-list encoding conditions. After the free recall task, subjects had to make metamemory judgments about how many items of each format they had seen and recalled. The key result was that a superiority of bizarre pictures over common ones was found in all conditions although performance was better when the pictures were presented alone than with their corresponding label. Subsequent metamemory judgments, however, showed that subjects underestimated the number of bizarre items actually recalled.

Stressing the mind: the effect of cognitive load and articulatory suppression on attentional guidance from working memory.

PubMed

Soto, David; Humphreys, Glyn W

2008-07-01

Four experiments explored the effect of cognitive load on the time course of top-down guidance of attention from working memory (WM). Observers had to search for a target presented among several distractors, with the target and distractor stimuli embedded inside different objects. On half of the trials, one of the distractor objects was cued by a matching item held in WM. When a single item was maintained in memory, search performance was impaired relative to a neutral baseline, where the memory and search displays did not match. These effects of WM on subsequent search were reduced by including a verbal suppression task during the WM and search displays, and by varying the WM load. The degree of competition for resources in WM is a key factor in determining the time course and magnitude of the interaction between WM and visual selection.

Remedial investigation report on Waste Area Grouping 5 at Oak Ridge National Laboratory, Oak Ridge, Tennessee. Volume 1: Technical summary

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1995-09-01

A remedial investigation (RI) was performed to support environmental restoration activities for Waste Area Grouping (WAG) 5 at the Oak Ridge National Laboratory (ORNL) in Oak Ridge, Tennessee. The WAG 5 RI made use of the observational approach, which concentrates on collecting only information needed to assess site risks and support future cleanup work. This information was interpreted and is presented using the framework of the site conceptual model, which relates contaminant sources and release mechanisms to migration pathways and exposure points that are keyed to current and future environmental risks for both human and ecological receptors. The site conceptualmore » model forms the basis of the WAG 5 remedial action strategy and remedial action objectives. The RI provided the data necessary to verify this model and allows recommendations to be made to accomplish those objectives.« less

Research pressure instrumentation for NASA Space Shuttle main engine, modification no. 5

NASA Technical Reports Server (NTRS)

Anderson, P. J.; Nussbaum, P.; Gustafson, G.

1984-01-01

The purpose of Modification No. 5 of this contract is to expand the scope of work (Task C) of this research study effort to develop pressure instrumentation for the SSME. The objective of this contract (Task C) is to direct Honeywell's Solid State Electronics Division's (SSED) extensive experience and expertise in solid state sensor technology to develop prototype pressure transducers which are targeted to meet the SSME performance design goals and to fabricate, test and deliver a total of 10 prototype units. SSED's basic approach is to effectively utilize the many advantages of silicon piezoresistive strain sensing technology to achieve the objectives of advanced state-of-the-art pressure sensors in terms of reliability, accuracy and ease of manufacture. More specifically, integration of multiple functions on a single chip is the key attribute of this technology which will be exploited during this research study.

Evaluation of microfinance projects.

PubMed

Johnson, S

1999-08-01

This paper criticizes the quick system proposed by Henk Moll for evaluating microfinance projects in the article ¿How to Pre-Evaluate Credit Projects in Ten Minutes¿. The author contended that there is a need to emphasize the objectives of the project. The procedure used by Moll, he contended, is applicable only to projects that have only two key objectives, such as credit operations, and the provision of services. Arguments are presented on the three specific questions proposed by Moll, ranging from the availability of externally audited financial reports, the performance of interest rate on loans vis-a-vis the inflation rate, and the provision of loans according to the individual requirements of the borrowers. Lastly, the author emphasizes that the overall approach is not useful and suggests that careful considerations should be observed in the use or abuse of a simple scoring system or checklist such as the one proposed by Moll.

The Value of a Well-Being Improvement Strategy

PubMed Central

Guo, Xiaobo; Coberley, Carter; Pope, James E.; Wells, Aaron

2015-01-01

Objective: The objective of this study is to evaluate effectiveness of a firm's 5-year strategy toward improving well-being while lowering health care costs amidst adoption of a Consumer-Driven Health Plan. Methods: Repeated measures statistical models were employed to test and quantify association between key demographic factors, employment type, year, individual well-being, and outcomes of health care costs, obesity, smoking, absence, and performance. Results: Average individual well-being trended upward by 13.5% over 5 years, monthly allowed amount health care costs declined 5.2% on average per person per year, and obesity and smoking rates declined by 4.8 and 9.7%, respectively, on average each year. The results show that individual well-being was significantly associated with each outcome and in the expected direction. Conclusions: The firm's strategy was successful in driving statistically significant, longitudinal well-being, biometric and productivity improvements, and health care cost reduction. PMID:26461860

Diamond Eye: a distributed architecture for image data mining

NASA Astrophysics Data System (ADS)

Burl, Michael C.; Fowlkes, Charless; Roden, Joe; Stechert, Andre; Mukhtar, Saleem

1999-02-01

Diamond Eye is a distributed software architecture, which enables users (scientists) to analyze large image collections by interacting with one or more custom data mining servers via a Java applet interface. Each server is coupled with an object-oriented database and a computational engine, such as a network of high-performance workstations. The database provides persistent storage and supports querying of the 'mined' information. The computational engine provides parallel execution of expensive image processing, object recognition, and query-by-content operations. Key benefits of the Diamond Eye architecture are: (1) the design promotes trial evaluation of advanced data mining and machine learning techniques by potential new users (all that is required is to point a web browser to the appropriate URL), (2) software infrastructure that is common across a range of science mining applications is factored out and reused, and (3) the system facilitates closer collaborations between algorithm developers and domain experts.

Design and Evaluation of a Cross-Cultural Training System

NASA Technical Reports Server (NTRS)

Santarelli, Thomas; Stagl, Kevin C.

2011-01-01

Cross-cultural competency, and the underlying communication and affective skills required to develop such expertise, is becoming increasingly important for a wide variety of domains. To address this need, we developed a blended learning platform which combines virtual role-play with tutorials, assessment and feedback. A Middle-Eastern Curriculum (MEC) exemplar for cross-cultural training U.S. military personnel was developed to guide the refinement of an existing game-based training platform. To complement this curriculum, we developed scenario authoring tools to enable end-users to define training objectives, link performance measures and feedback/remediation to these objectives, and deploy experiential scenarios within a game-based virtual environment (VE). Lessons learned from the design and development of this exemplar cross-cultural competency curriculum, as well as formative evaluation results, are discussed. Initial findings suggest that the underlying training technology promotes deep levels of semantic processing of the key information of relevant cultural and communication skills.

Close interpersonal proximity modulates visuomotor processing of object affordances in shared, social space.

PubMed

Saccone, Elizabeth J; Szpak, Ancret; Churches, Owen; Nicholls, Michael E R

2018-01-01

Research suggests that the human brain codes manipulable objects as possibilities for action, or affordances, particularly objects close to the body. Near-body space is not only a zone for body-environment interaction but also is socially relevant, as we are driven to preserve our near-body, personal space from others. The current, novel study investigated how close proximity of a stranger modulates visuomotor processing of object affordances in shared, social space. Participants performed a behavioural object recognition task both alone and with a human confederate. All object images were in participants' reachable space but appeared relatively closer to the participant or the confederate. Results revealed when participants were alone, objects in both locations produced an affordance congruency effect but when the confederate was present, only objects nearer the participant elicited the effect. Findings suggest space is divided between strangers to preserve independent near-body space boundaries, and in turn this process influences motor coding for stimuli within that social space. To demonstrate that this visuomotor modulation represents a social phenomenon, rather than a general, attentional effect, two subsequent experiments employed nonhuman joint conditions. Neither a small, Japanese, waving cat statue (Experiment 2) nor a metronome (Experiment 3) modulated the affordance effect as in Experiment 1. These findings suggest a truly social explanation of the key interaction from Experiment 1. This study represents an important step toward understanding object affordance processing in real-world, social contexts and has implications broadly across fields of social action and cognition, and body space representation.

Performance evaluation of Al-Zahra academic medical center based on Iran balanced scorecard model

PubMed Central

Raeisi, Ahmad Reza; Yarmohammadian, Mohammad Hossein; Bakhsh, Roghayeh Mohammadi; Gangi, Hamid

2012-01-01

Background: Growth and development in any country's national health system, without an efficient evaluation system, lacks the basic concepts and tools necessary for fulfilling the system's goals. The balanced scorecard (BSC) is a technique widely used to measure the performance of an organization. The basic core of the BSC is guided by the organization's vision and strategies, which are the bases for the formation of four perspectives of BSC. The goal of this research is the performance evaluation of Al-Zahra Academic Medical Center in Isfahan University of Medical Sciences, based on Iran BSC model. Materials and Methods: This is a combination (quantitative–qualitative) research which was done at Al-Zahra Academic Medical Center in Isfahan University of Medical Sciences in 2011. The research populations were hospital managers at different levels. Sampling method was purposive sampling in which the key informed personnel participated in determining the performance indicators of hospital as the BSC team members in focused discussion groups. After determining the conceptual elements in focused discussion groups, the performance objectives (targets) and indicators of hospital were determined and sorted in perspectives by the group discussion participants. Following that, the performance indicators were calculated by the experts according to the predetermined objectives; then, the score of each indicator and the mean score of each perspective were calculated. Results: Research findings included development of the organizational mission, vision, values, objectives, and strategies. The strategies agreed upon by the participants in the focus discussion group included five strategies, which were customer satisfaction, continuous quality improvement, development of human resources, supporting innovation, expansion of services and improving the productivity. Research participants also agreed upon four perspectives for the Al-Zahra hospital BSC. In the patients and community perspective (customer), two objectives and three indicators were agreed upon, with a mean score of 75.9%. In the internal process perspective, 4 objectives and 14 indicators were agreed upon, with a mean score of 79.37%. In the learning and growth perspective, four objectives and eight indicators were agreed upon, with a mean score of 81.11%. Finally, in the financial perspective, two objectives and five indicators were agreed upon, with a mean score of 67.15%. Conclusion: One way to create demand for hospital services is performance evaluation by paying close attention to all BSC perspectives, especially the non-financial perspectives such as customers and internal processes perspectives. In this study, the BSC showed the differences in performance level of the organization in different perspectives, which would assist the hospital managers improve their performance indicators. The learning and growth perspective obtained the highest score, and the financial perspective obtained the least score. Since the learning and growth perspective acts as a base for all other perspectives and they depend on it, hospitals must continuously improve the service processes and the quality of services by educating staff and updating their policies and procedures. This can increase customer satisfaction and productivity and finally improve the BSC in financial perspective. PMID:23555104

Key strategies to improve systems for managing patient complaints within health facilities – what can we learn from the existing literature?

PubMed Central

2018-01-01

ABSTRACT Background: Information from patient complaints – a widely accepted measure of patient satisfaction with services – can inform improvements in service quality, and contribute towards overall health systems performance. While analyses of data from patient complaints received much emphasis, there is limited published literature on key interventions to improve complaint management systems. Objectives: The objectives are two-fold: first, to synthesise existing evidence and provide practical options to inform future policy and practice and, second, to identify key outstanding gaps in the existing literature to inform agenda for future research. Methods: We report results of review of the existing literature. Peer-reviewed published literature was searched in OVID Medline, OVID Global Health and PubMed. In addition, relevant citations from the reviewed articles were followed up, and we also report grey literature from the UK and the Netherlands. Results: Effective interventions can improve collection of complaints (e.g. establishing easy-to-use channels and raising patients’ awareness of these), analysis of complaint data (e.g. creating structures and spaces for analysis and learning from complaints data), and subsequent action (e.g. timely feedback to complainants and integrating learning from complaints into service quality improvement). No one single measure can be sufficient, and any intervention to improve patient complaint management system must include different components, which need to be feasible, effective, scalable, and sustainable within local context. Conclusions: Effective interventions to strengthen patient complaints systems need to be: comprehensive, integrated within existing systems, context-specific and cognizant of the information asymmetry and the unequal power relations between the key actors. Four gaps in the published literature represent an agenda for future research: limited understanding of contexts of effective interventions, absence of system-wide approaches, lack of evidence from low- and middle-income countries and absence of focused empirical assessments of behaviour of staff who manage patient complaints. PMID:29658393

Gaia challenging performances verification: combination of spacecraft models and test results

NASA Astrophysics Data System (ADS)

Ecale, Eric; Faye, Frédéric; Chassat, François

2016-08-01

To achieve the ambitious scientific objectives of the Gaia mission, extremely stringent performance requirements have been given to the spacecraft contractor (Airbus Defence and Space). For a set of those key-performance requirements (e.g. end-of-mission parallax, maximum detectable magnitude, maximum sky density or attitude control system stability), this paper describes how they are engineered during the whole spacecraft development process, with a focus on the end-to-end performance verification. As far as possible, performances are usually verified by end-to-end tests onground (i.e. before launch). However, the challenging Gaia requirements are not verifiable by such a strategy, principally because no test facility exists to reproduce the expected flight conditions. The Gaia performance verification strategy is therefore based on a mix between analyses (based on spacecraft models) and tests (used to directly feed the models or to correlate them). Emphasis is placed on how to maximize the test contribution to performance verification while keeping the test feasible within an affordable effort. In particular, the paper highlights the contribution of the Gaia Payload Module Thermal Vacuum test to the performance verification before launch. Eventually, an overview of the in-flight payload calibration and in-flight performance verification is provided.

The Functional Task Test (FTT): An Interdisciplinary Testing Protocol to Investigate the Factors Underlying Changes in Astronaut Functional Performance

NASA Technical Reports Server (NTRS)

Bloomberg, J. J.; Lawrence, E. L.; Arzeno, N. M.; Buxton, R. E.; Feiveson, A. H.; Kofman, I. S.; Lee, S. M. C.; Mulavara, A. P.; Peters, B. T.; Platts. S. H.;

Performance seeking control excitation mode

NASA Technical Reports Server (NTRS)

Schkolnik, Gerard

1995-01-01

Flight testing of the performance seeking control (PSC) excitation mode was successfully completed at NASA Dryden on the F-15 highly integrated digital electronic control (HIDEC) aircraft. Although the excitation mode was not one of the original objectives of the PSC program, it was rapidly prototyped and implemented into the architecture of the PSC algorithm, allowing valuable and timely research data to be gathered. The primary flight test objective was to investigate the feasibility of a future measurement-based performance optimization algorithm. This future algorithm, called AdAPT, which stands for adaptive aircraft performance technology, generates and applies excitation inputs to selected control effectors. Fourier transformations are used to convert measured response and control effector data into frequency domain models which are mapped into state space models using multiterm frequency matching. Formal optimization principles are applied to produce an integrated, performance optimal effector suite. The key technical challenge of the measurement-based approach is the identification of the gradient of the performance index to the selected control effector. This concern was addressed by the excitation mode flight test. The AdAPT feasibility study utilized the PSC excitation mode to apply separate sinusoidal excitation trims to the controls - one aircraft, inlet first ramp (cowl), and one engine, throat area. Aircraft control and response data were recorded using on-board instrumentation and analyzed post-flight. Sensor noise characteristics, axial acceleration performance gradients, and repeatability were determined. Results were compared to pilot comments to assess the ride quality. Flight test results indicate that performance gradients were identified at all flight conditions, sensor noise levels were acceptable at the frequencies of interest, and excitations were generally not sensed by the pilot.

Role of laser ablation-inductively coupled plasma-mass spectrometry in cultural heritage research: a review.

PubMed

Giussani, Barbara; Monticelli, Damiano; Rampazzi, Laura

2009-03-02

Cultural heritage represents a bridge between the contemporary society and the past populations, and a strong collaboration between archaeologists, art historians and analysts may lead to the decryption of the information hidden in an ancient object. Quantitative elemental compositional data play a key role in solving questions concerning dating, provenance, technology, use and the relationship of ancient cultures with the environment. Nevertheless, the scientific investigation of an artifact should be carried out complying with some important constraints: above all the analyses should be as little destructive as possible and performed directly on the object to preserve its integrity. Laser ablation sampling coupled to inductively coupled plasma-mass spectrometry (LA-ICP-MS) fulfils these requirements exhibiting comparably strong analytical performance in trace element determination. This review intends to show through the applications found in the literature how valuable is the contribution of LA-ICP-MS in the investigation of ancient materials such as obsidian, glass, pottery, human remains, written heritage, metal objects and miscellaneous stone materials. The main issues related to cultural heritage investigation are introduced, followed by a brief description of the features of this technique. An overview of the exploitation of LA-ICP-MS is then presented. Finally, advantages and drawbacks of this technique are critically discussed: the fit for purpose and prospects of the use of LA-ICP-MS are presented.

Comet/Asteroid Protection System (CAPS): Preliminary Space-Based Concept and Study Results

NASA Technical Reports Server (NTRS)

Mazanek, Daniel D.; Roithmayr, Carlos M.; Antol, Jeffrey; Park, Sang-Young; Koons, Robert H.; Bremer, James C.; Murphy, Douglas G.; Hoffman, James A.; Kumar, Renjith R.; Seywald, Hans

2005-01-01

There exists an infrequent, but significant hazard to life and property due to impacting asteroids and comets. There is currently no specific search for long-period comets, smaller near-Earth asteroids, or smaller short-period comets. These objects represent a threat with potentially little or no warning time using conventional ground-based telescopes. These planetary bodies also represent a significant resource for commercial exploitation, long-term sustained space exploration, and scientific research. The Comet/Asteroid Protection System (CAPS) is a future space-based system concept that provides permanent, continuous asteroid and comet monitoring, and rapid, controlled modification of the orbital trajectories of selected bodies. CAPS would expand the current detection effort to include long-period comets, as well as small asteroids and short-period comets capable of regional destruction. A space-based detection system, despite being more costly and complex than Earth-based initiatives, is the most promising way of expanding the range of detectable objects, and surveying the entire celestial sky on a regular basis. CAPS would provide an orbit modification system capable of diverting kilometer class objects, and modifying the orbits of smaller asteroids for impact defense and resource utilization. This Technical Memorandum provides a compilation of key related topics and analyses performed during the CAPS study, which was performed under the Revolutionary Aerospace Systems Concepts (RASC) program, and discusses technologies that could enable the implementation of this future system.

Colors in mind: a novel paradigm to investigate pure color imagery.

PubMed

Wantz, Andrea L; Borst, Grégoire; Mast, Fred W; Lobmaier, Janek S

2015-07-01

Mental color imagery abilities are commonly measured using paradigms that involve naming, judging, or comparing the colors of visual mental images of well-known objects (e.g., "Is a sunflower darker yellow than a lemon"?). Although this approach is widely used in patient studies, differences in the ability to perform such color comparisons might simply reflect participants' general knowledge of object colors rather than their ability to generate accurate visual mental images of the colors of the objects. The aim of the present study was to design a new color imagery paradigm. Participants were asked to visualize a color for 3 s and then to determine a visually presented color by pressing 1 of 6 keys. We reasoned that participants would react faster when the imagined and perceived colors were congruent than when they were incongruent. In Experiment 1, participants were slower in incongruent than congruent trials but only when they were instructed to visualize the colors. The results in Experiment 2 demonstrate that the congruency effect reported in Experiment 1 cannot be attributed to verbalization of the color that had to be visualized. Finally, in Experiment 3, the congruency effect evoked by mental imagery correlated with performance in a perceptual version of the task. We discuss these findings with respect to the mechanisms that underlie mental imagery and patients suffering from color imagery deficits. (c) 2015 APA, all rights reserved.

Drivers of Dashboard Development (3-D): A Curricular Continuous Quality Improvement Approach.

PubMed

Shroyer, A Laurie; Lu, Wei-Hsin; Chandran, Latha

2016-04-01

Undergraduate medical education (UME) programs are seeking systematic ways to monitor and manage their educational performance metrics and document their achievement of external goals (e.g., Liaison Committee on Medical Education [LCME] accreditation requirements) and internal objectives (institution-specific metrics). In other continuous quality improvement (CQI) settings, summary dashboard reports have been used to evaluate and improve performance. The Stony Brook University School of Medicine UME leadership team developed and implemented summary dashboard performance reports in 2009 to document LCME standards/criteria compliance, evaluate medical student performance, and identify progress in attaining institutional curricular goals and objectives. Key performance indicators (KPIs) and benchmarks were established and have been routinely monitored as part of the novel Drivers of Dashboard Development (3-D) approach to curricular CQI. The systematic 3-D approach has had positive CQI impacts. Substantial improvements over time have been documented in KPIs including timeliness of clerkship grades, midclerkship feedback, student mistreatment policy awareness, and student satisfaction. Stakeholder feedback indicates that the dashboards have provided useful information guiding data-driven curricular changes, such as integrating clinician-scientists as lecturers in basic science courses to clarify the clinical relevance of specific topics. Gaining stakeholder acceptance of the 3-D approach required clear communication of preestablished targets and annual meetings with department leaders and course/clerkship directors. The 3-D approach may be considered by UME programs as a template for providing faculty and leadership with a CQI framework to establish shared goals, document compliance, report accomplishments, enrich communications, facilitate decisions, and improve performance.

Accuracy of a smartphone to test laryngoscope's light and an audit to our laryngoscopes using an ISO standard.

PubMed

Machado, Diogo Alcino de Abreu Ribeiro Carvalho; Esteves, Dina da Assunção Azevedo; Branca, Pedro Manuel Araújo de Sousa

Laryngoscope is a key tool in anesthetic practice. Direct laryngoscopy is a crucial moment and inadequate laryngoscope's light can lead to catastrophic consequences. From our experience laryngoscope's light is assessed in a subjective manner and we believe a more precise evaluation should be used. Our objective is to compare the accuracy of a smartphone compared to a lux meter. Secondly we audited our Operating Room laryngoscopes. We designed a pragmatic study, using as primary outcome the accuracy of a smartphone compared to the lux meter. Further we audited with both the lux meter and the smartphone all laryngoscopes and blades ready to use in our Operating Rooms, using the International Standard form the International Organization for Standardization. For primary outcome we found no significant difference between devices. Our audit showed that only 2 in 48 laryngoscopes complied with the ISO norm. When comparing the measurements between the lux meter and the smartphone we found no significant difference. Ideally every laryngoscope should perform as required. We believe all laryngoscopes should have a practical but reliable and objective test prior to its utilization. Our results suggest the smartphone was accurate enough to be used as a lux meter to test laryngoscope's light. Audit results showing only 4% comply with the ISO standard are consistent with other studies. The tested smartphone has enough accuracy to perform light measurement in laryngoscopes. We believe this is a step further to perform an objective routine check to laryngoscope's light. Copyright © 2016. Published by Elsevier Editora Ltda.

Multi-time Scale Coordination of Distributed Energy Resources in Isolated Power Systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mayhorn, Ebony; Xie, Le; Butler-Purry, Karen

2016-03-31

In isolated power systems, including microgrids, distributed assets, such as renewable energy resources (e.g. wind, solar) and energy storage, can be actively coordinated to reduce dependency on fossil fuel generation. The key challenge of such coordination arises from significant uncertainty and variability occurring at small time scales associated with increased penetration of renewables. Specifically, the problem is with ensuring economic and efficient utilization of DERs, while also meeting operational objectives such as adequate frequency performance. One possible solution is to reduce the time step at which tertiary controls are implemented and to ensure feedback and look-ahead capability are incorporated tomore » handle variability and uncertainty. However, reducing the time step of tertiary controls necessitates investigating time-scale coupling with primary controls so as not to exacerbate system stability issues. In this paper, an optimal coordination (OC) strategy, which considers multiple time-scales, is proposed for isolated microgrid systems with a mix of DERs. This coordination strategy is based on an online moving horizon optimization approach. The effectiveness of the strategy was evaluated in terms of economics, technical performance, and computation time by varying key parameters that significantly impact performance. The illustrative example with realistic scenarios on a simulated isolated microgrid test system suggests that the proposed approach is generalizable towards designing multi-time scale optimal coordination strategies for isolated power systems.« less

Vapor Compression Distillation Subsystem (VCDS) component enhancement, testing and expert fault diagnostics development, volume 1

NASA Technical Reports Server (NTRS)

Kovach, L. S.; Zdankiewicz, E. M.

1987-01-01

Vapor compression distillation technology for phase change recovery of potable water from wastewater has evolved as a technically mature approach for use aboard the Space Station. A program to parametrically test an advanced preprototype Vapor Compression Distillation Subsystem (VCDS) was completed during 1985 and 1986. In parallel with parametric testing, a hardware improvement program was initiated to test the feasibility of incorporating several key improvements into the advanced preprototype VCDS following initial parametric tests. Specific areas of improvement included long-life, self-lubricated bearings, a lightweight, highly-efficient compressor, and a long-life magnetic drive. With the exception of the self-lubricated bearings, these improvements are incorporated. The advanced preprototype VCDS was designed to reclaim 95 percent of the available wastewater at a nominal water recovery rate of 1.36 kg/h achieved at a solids concentration of 2.3 percent and 308 K condenser temperature. While this performance was maintained for the initial testing, a 300 percent improvement in water production rate with a corresponding lower specific energy was achieved following incorporation of the improvements. Testing involved the characterization of key VCDS performance factors as a function of recycle loop solids concentration, distillation unit temperature and fluids pump speed. The objective of this effort was to expand the VCDS data base to enable defining optimum performance characteristics for flight hardware development.

Summary on Several Key Techniques in 3D Geological Modeling

PubMed Central

2014-01-01

Several key techniques in 3D geological modeling including planar mesh generation, spatial interpolation, and surface intersection are summarized in this paper. Note that these techniques are generic and widely used in various applications but play a key role in 3D geological modeling. There are two essential procedures in 3D geological modeling: the first is the simulation of geological interfaces using geometric surfaces and the second is the building of geological objects by means of various geometric computations such as the intersection of surfaces. Discrete geometric surfaces that represent geological interfaces can be generated by creating planar meshes first and then spatially interpolating; those surfaces intersect and then form volumes that represent three-dimensional geological objects such as rock bodies. In this paper, the most commonly used algorithms of the key techniques in 3D geological modeling are summarized. PMID:24772029

The Sensor Test for Orion RelNav Risk Mitigation (STORRM) Development Test Objective

NASA Technical Reports Server (NTRS)

Christian, John A.; Hinkel, Heather; D'Souza, Christopher N.; Maguire, Sean; Patangan, Mogi

2011-01-01

The Sensor Test for Orion Relative-Navigation Risk Mitigation (STORRM) Development Test Objective (DTO) flew aboard the Space Shuttle Endeavour on STS-134 in May- June 2011, and was designed to characterize the performance of the flash LIDAR and docking camera being developed for the Orion Multi-Purpose Crew Vehicle. The flash LIDAR, called the Vision Navigation Sensor (VNS), will be the primary navigation instrument used by the Orion vehicle during rendezvous, proximity operations, and docking. The DC will be used by the Orion crew for piloting cues during docking. This paper provides an overview of the STORRM test objectives and the concept of operations. It continues with a description of STORRM's major hardware components, which include the VNS, docking camera, and supporting avionics. Next, an overview of crew and analyst training activities will describe how the STORRM team prepared for flight. Then an overview of in-flight data collection and analysis is presented. Key findings and results from this project are summarized. Finally, the paper concludes with lessons learned from the STORRM DTO.

Communication target object recognition for D2D connection with feature size limit

NASA Astrophysics Data System (ADS)

Ok, Jiheon; Kim, Soochang; Kim, Young-hoon; Lee, Chulhee

2015-03-01

Recently, a new concept of device-to-device (D2D) communication, which is called "point-and-link communication" has attracted great attentions due to its intuitive and simple operation. This approach enables user to communicate with target devices without any pre-identification information such as SSIDs, MAC addresses by selecting the target image displayed on the user's own device. In this paper, we present an efficient object matching algorithm that can be applied to look(point)-and-link communications for mobile services. Due to the limited channel bandwidth and low computational power of mobile terminals, the matching algorithm should satisfy low-complexity, low-memory and realtime requirements. To meet these requirements, we propose fast and robust feature extraction by considering the descriptor size and processing time. The proposed algorithm utilizes a HSV color histogram, SIFT (Scale Invariant Feature Transform) features and object aspect ratios. To reduce the descriptor size under 300 bytes, a limited number of SIFT key points were chosen as feature points and histograms were binarized while maintaining required performance. Experimental results show the robustness and the efficiency of the proposed algorithm.

Personal radiation detector at a high technology readiness level that satisfies DARPA's SN-13-47 and SIGMA program requirements

NASA Astrophysics Data System (ADS)

Ginzburg, D.; Knafo, Y.; Manor, A.; Seif, R.; Ghelman, M.; Ellenbogen, M.; Pushkarsky, V.; Ifergan, Y.; Semyonov, N.; Wengrowicz, U.; Mazor, T.; Kadmon, Y.; Cohen, Y.; Osovizky, A.

2015-06-01

There is a need to develop new personal radiation detector (PRD) technologies that can be mass produced. On August 2013, DARPA released a request for information (RFI) seeking innovative radiation detection technologies. In addition, on December 2013, a Broad Agency Announcement (BAA) for the SIGMA program was released. The RFI requirements focused on a sensor that should possess three main properties: low cost, high compactness and radioisotope identification capabilities. The identification performances should facilitate the detection of a hidden threat, ranging from special nuclear materials (SNM) to commonly used radiological sources. Subsequently, the BAA presented the specific requirements at an instrument level and provided a comparison between the current market status (state-of-the-art) and the SIGMA program objectives. This work presents an optional alternative for both the detection technology (sensor with communication output and without user interface) for DARPA's initial RFI and for the PRD required by the SIGMA program. A broad discussion is dedicated to the method proposed to fulfill the program objectives and to the selected alternative that is based on the PDS-GO design and technology. The PDS-GO is the first commercially available PRD that is based on a scintillation crystal optically coupled with a silicon photomultiplier (SiPM), a solid-state light sensor. This work presents the current performance of the instrument and possible future upgrades based on recent technological improvements in the SiPM design. The approach of utilizing the SiPM with a commonly available CsI(Tl) crystal is the key for achieving the program objectives. This approach provides the appropriate performance, low cost, mass production and small dimensions; however, it requires a creative approach to overcome the obstacles of the solid-state detector dark current (noise) and gain stabilization over a wide temperature range. Based on the presented results, we presume that the proposed approach of SiPM, with pixel size of 35 μm, coupled to a scintillation material (for gamma and neutron detection) ensures the availability and low cost of the key components. Furthermore, automated manufacturing process enables mass production, thereby fulfilling the SIGMA program requirements, both as a sensor (assimilated with mobile device) and as a full detection device.

Estimating US federal wildland fire managers' preferences toward competing strategic suppression objectives

Treesearch

David E. Calkin; Tyron Venn; Matthew Wibbenmeyer; Matthew P. Thompson

2012-01-01

Wildfire management involves significant complexity and uncertainty, requiring simultaneous consideration of multiple, non-commensurate objectives. This paper investigates the tradeoffs fire managers are willing to make among these objectives using a choice experiment methodology that provides three key advancements relative to previous stated-preference studies...

Objects of Desire: Power and Passion in Collaborative Activity

ERIC Educational Resources Information Center

Nardi, Bonnie A.

2005-01-01

This article uses activity theory to analyze the conduct of collaborative scientific research, showing how the conceptualization of object is critical to understanding key aspects of scientific collaboration. I argue that the passions and desires behind objects of scientific research are missing in most accounts. I suggest refinements to the…

Stakeholders’ Perspectives on Strategies for the Recruitment and Retention of Primary Health Care Employees in Qatar: A Qualitative Approach

PubMed Central

Alameddine, Mohamad; Yassoub, Rami; Mourad, Yara; Khodr, Hiba

2017-01-01

This study explores the recruitment and retention conditions influencing primary health care (PHC) human resources for health (HRH) in Qatar and suggests strategies for their improvement. A qualitative design employing semistructured key informant interviews with PHC stakeholders in Qatar was utilized. Key interviewees were originally recognized, and snowball sampling was used to identify additional interviewees until reaching saturation point. Interview scripts were transcribed and then analyzed thematically using the Nvivo software package. Thematic analysis precipitated a number of themes. Under recruitment, the centrality of enhancing collaboration with academic institutions, enhancing extrinsic benefits, and strengthening human resources recruitment and management practices. Dedicated support needs to be provided to expatriate HRH especially in regard to housing services, children schooling, and streamlining administrative processes for relocation. Findings revealed that job security, continuous professional development, objective performance appraisal systems, enhanced job transparency, and remuneration are key retention concerns. The study provides a number of recommendations for the proper recruitment and retention of HRH. Health planners and decision makers must take these recommendations into consideration to ensure the presence of a competent and sustainable HRH in the PHC sector in the future. PMID:28853314

Stakeholders' Perspectives on Strategies for the Recruitment and Retention of Primary Health Care Employees in Qatar: A Qualitative Approach.

PubMed

Alameddine, Mohamad; Yassoub, Rami; Mourad, Yara; Khodr, Hiba

2017-01-01

This study explores the recruitment and retention conditions influencing primary health care (PHC) human resources for health (HRH) in Qatar and suggests strategies for their improvement. A qualitative design employing semistructured key informant interviews with PHC stakeholders in Qatar was utilized. Key interviewees were originally recognized, and snowball sampling was used to identify additional interviewees until reaching saturation point. Interview scripts were transcribed and then analyzed thematically using the Nvivo software package. Thematic analysis precipitated a number of themes. Under recruitment, the centrality of enhancing collaboration with academic institutions, enhancing extrinsic benefits, and strengthening human resources recruitment and management practices. Dedicated support needs to be provided to expatriate HRH especially in regard to housing services, children schooling, and streamlining administrative processes for relocation. Findings revealed that job security, continuous professional development, objective performance appraisal systems, enhanced job transparency, and remuneration are key retention concerns. The study provides a number of recommendations for the proper recruitment and retention of HRH. Health planners and decision makers must take these recommendations into consideration to ensure the presence of a competent and sustainable HRH in the PHC sector in the future.

Concentrating Solar Power Central Receiver Panel Component Fabrication and Testing FINAL REPORT

DOE Office of Scientific and Technical Information (OSTI.GOV)

McDowell, Michael W; Miner, Kris

The objective of this project is to complete a design of an advanced concentrated solar panel and demonstrate the manufacturability of key components. Then confirm the operation of the key components under prototypic solar flux conditions. This work is an important step in reducing the levelized cost of energy (LCOE) from a central receiver solar power plant. The key technical risk to building larger power towers is building the larger receiver systems. Therefore, this proposed technology project includes the design of an advanced molten salt prototypic sub-scale receiver panel that can be utilized into a large receiver system. Then completemore » the fabrication and testing of key components of the receive design that will be used to validate the design. This project shall have a significant impact on solar thermal power plant design. Receiver panels of suitable size for utility scale plants are a key element to a solar power tower plant. Many subtle and complex manufacturing processes are involved in producing a reliable, robust receiver panel. Given the substantial size difference between receiver panels manufactured in the past and those needed for large plant designs, the manufacture and demonstration on prototype receiver panel components with representative features of a full-sized panel will be important to improving the build process for commercial success. Given the thermal flux limitations of the test facility, the panel components cannot be rendered full size. Significance changes occurred in the projects technical strategies from project initiation to the accomplishments described herein. The initial strategy was to define cost improvements for the receiver, design and build a scale prototype receiver and test, on sun, with a molten salt heat transport system. DOE had committed to constructing a molten salt heat transport loop to support receiver testing at the top of the NSTTF tower. Because of funding constraints this did not happen. A subsequent plan to test scale prototype receiver, off sun but at temperature, at a molten salt loop at ground level adjacent to the tower also had to be abandoned. Thus, no test facility existed for a molten salt receiver test. As a result, PWR completed the prototype receiver design and then fabricated key components for testing instead of fabricating the complete prototype receiver. A number of innovative design ideas have been developed. Key features of the receiver panel have been identified. This evaluation includes input from Solar 2, personal experience of people working on these programs and meetings with Sandia. Key components of the receiver design and key processes used to fabricate a receiver have been selected for further evaluation. The Test Plan, Concentrated Solar Power Receiver In Cooperation with the Department of Energy and Sandia National Laboratory was written to define the scope of the testing to be completed as well as to provide details related to the hardware, instrumentation, and data acquisition. The document contains a list of test objectives, a test matrix, and an associated test box showing the operating points to be tested. Test Objectives: 1. Demonstrate low-cost manufacturability 2. Demonstrate robustness of two different tube base materials 3. Collect temperature data during on sun operation 4. Demonstrate long term repeated daily operation of heat shields 5. Complete pinhole tube weld repairs 6. Anchor thermal models This report discusses the tests performed, the results, and implications for design improvements and LCOE reduction.« less

Access to Network Login by Three-Factor Authentication for Effective Information Security.

PubMed

Vaithyasubramanian, S; Christy, A; Saravanan, D

2016-01-01

Today's technology development in the field of computer along with internet of things made huge difference in the transformation of our lives. Basic computer framework and web client need to make significant login signify getting to mail, long range interpersonal communication, internet keeping money, booking tickets, perusing online daily papers, and so forth. The login user name and secret key mapping validate if the logging user is the intended client. Secret key is assumed an indispensable part in security. The objective of MFA is to make a layered safeguard and make it more troublesome for an unauthenticated entity to get to an objective, for example, a physical area, processing gadget, system, or database. In the event that one element is bargained or broken, the assailant still has two more boundaries to rupture before effectively breaking into the objective. An endeavor has been made by utilizing three variable types of authentication. In this way managing additional secret key includes an additional layer of security.

Access to Network Login by Three-Factor Authentication for Effective Information Security

PubMed Central

Vaithyasubramanian, S.; Christy, A.; Saravanan, D.

2016-01-01

Today's technology development in the field of computer along with internet of things made huge difference in the transformation of our lives. Basic computer framework and web client need to make significant login signify getting to mail, long range interpersonal communication, internet keeping money, booking tickets, perusing online daily papers, and so forth. The login user name and secret key mapping validate if the logging user is the intended client. Secret key is assumed an indispensable part in security. The objective of MFA is to make a layered safeguard and make it more troublesome for an unauthenticated entity to get to an objective, for example, a physical area, processing gadget, system, or database. In the event that one element is bargained or broken, the assailant still has two more boundaries to rupture before effectively breaking into the objective. An endeavor has been made by utilizing three variable types of authentication. In this way managing additional secret key includes an additional layer of security. PMID:27006976

Issue of data acquisition and processing using short range photogrammetry and terrestrial laser scanning for educational portals and virtual museums based on Wawel cathedral. (Polish Title: Problematyka pozyskiwania i przetwarzania danych fotogrametrycznych i z naziemnego skaningu laserowego na potrzeby tworzenia portali edukacyjnych i wirtualnych muzeów na przykładzie Katedry Wawelskiej)

NASA Astrophysics Data System (ADS)

Mitka, B.; Szelest, P.

2013-12-01

This paper presents the issues related to the acquisition and processing of terrestrial photogrammetry and laser scanning for building educational portals and virtual museums. Discusses the specific requirements of measurement technology and data processing for all kinds of objects, ranging from architecture through sculpture and architectural detail on the fabric and individual museum exhibits. Educational portals and virtual museums require a modern, high-quality visuals (3D models, virtual tours, animations, etc.) supplemented by descriptive content or audio commentary. Source for obtaining such materials are mostly terrestrial laser scanning and photogrammetry as technologies that provide complete information about the presented geometric objects. However, the performance requirements of web services impose severe restrictions on the presented content. It is necessary to use optimalization geometry process to streamline the way of its presentation. Equally important problem concerns the selection of appropriate technology and process measurement data processing presented for each type of objects. Only skillful selection of measuring equipment and data processing tools effectively ensure the achievement of a satisfactory end result. Both terrestrial laser scanning technology and digital close range photogrammetry has its strengths which should be used but also the limitations that must be taken into account in this kind of work. The key is choosing the right scanner for both the measured object and terrain such as pixel size in the performance of his photos.

A Daytime Nap Facilitates Generalization of Word Meanings in Young Toddlers

PubMed Central

Horváth, Klára; Liu, Siying; Plunkett, Kim

2016-01-01

Study Objectives: One of the key processes in language development is generalization—the selection and extension of relevant features and information to similar objects and concepts. Little is known about how sleep influences generalization, and studies on the topic are inconclusive. Our aim was to investigate how a nap affects generalization in 16-mo-olds. We hypothesized that a nap is necessary for successful generalization of word meanings. Methods: Twenty-eight 16-mo-old, typically developing toddlers were randomly assigned to nap and wake groups. We trained toddlers with two novel object-word pairs and tested their initial ability to generalize. Toddlers took part in an intermodal preferential looking task, in which they were shown different colored versions of the original objects and heard one of the trained labels. If toddlers understand the label, they are expected to increase their looking time to the target. Looking behavior was measured with an automated eye tracker. Afterward, the nap group went to sleep, while the wake group stayed awake for approximately 2 h. We then repeated the test of their performance on the generalization task. Results: A significant interaction of group and session was found in preferential looking. The performance of the nap group increased after the nap, whereas that of the wake group did not change. Conclusions: Our results suggest that napping improves generalization in toddlers. Citation: Horváth K, Liu S, Plunkett K. A daytime nap facilitates generalization of word meanings in young toddlers. SLEEP 2016;39(1):203–207. PMID:26237777

Ultra-High Temperature Thermal Barrier Coatings

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jordan, Eric; Gell, Maurice; Wang, Jiwen

In this project, HiFunda LLC worked with the University of Connecticut (UConn) to demonstrate an attractive option for thermal barrier coatings (TBCs), namely yttrium aluminum garnet (YAG), which was well known to have proven thermal stability and excellent high-temperature mechanical properties. YAG and other higher temperature TBCs have not been used to date because they exhibit inadequate durability, resulting from (a) poor erosion resistance and (b) greater thermal expansion mismatch strains compared to 7YSZ. UConn had previously demonstrated that the solution precursor plasma spray (SPPS) process could produce a durable 7YSZ TBC resulting from a highly strain tolerant microstructure, consistingmore » of through-coating-thickness vertical cracks. HiFunda/UConn reasoned at the start of Phase I that such a strain-tolerant microstructure could produce durable, higher temperature TBCs. The Phase I work demonstrated the feasibility of that concept and of SPPS YAG TBCs. The Phase II work demonstrated that SPPS YAG coating possessed the necessary range of properties to be a viable high temperature TBC, including cyclic durability and reduced elevated temperature thermal conductivity. The SPPS YAG TBCs were shown to have the potential to be used at temperatures 200°C higher than APS YSZ, based on thermal stability, sinter resistance, and CMAS resistance. The overall technical objectives of this Phase 2A project were to further improve the commercial viability of SPPS by improving their performance capabilities and manufacturing economics. The improved performance capability was to be achieved through: (1) further reductions in thermal conductivity, which allows higher gas temperatures and/or thinner coatings to achieve similar gas temperatures; and (2) improved resistance to calcium magnesium alumnoslicate (CMAS) attack of the TBCs, which can yield improved lifetimes. The improved thermal conductivity and CMAs resistance was to be accomplished through compositional and microstructural optimization. Finally, the key metrics to improve the process economics were increased deposition rate and efficiency. In addition to these technical objectives, there were commercialization objectives of getting key commercialization partners to evaluate and qualify the SPPS YAG technology independently so that the technology readiness level (TRL) of the technology could be sufficiently advanced to facilitate Phase III strategic partnerships, leading to eventual commercialization consistent with the overall objectives of the DOE SBIR/STTR program. All the Phase 2A goals were successfully achieved.« less

Thermal and Evolved Gas Analysis of Calcite Under Reduced Operating Pressures: Implications for the 2011 MSL Sample Analysis at Mars (SAM) Instrument

NASA Technical Reports Server (NTRS)

Lauer, H. V. Jr.; Ming, D. W.; Sutter, B.; Mahaffy, P. R.

2010-01-01

The Mars Science Laboratory (MSL) is scheduled for launch in 2011. The science objectives for MSL are to assess the past or present biological potential, to characterize the geology, and to investigate other planetary processes that influence habitability at the landing site. The Sample Analysis at Mars (SAM) is a key instrument on the MSL payload that will explore the potential habitability at the landing site [1]. In addition to searching for organic compounds, SAM will have the capability to characterized evolved gases as a function of increasing temperature and provide information on the mineralogy of volatile-bearing phases such as carbonates, sulfates, phyllosilicates, and Fe-oxyhydroxides. The operating conditions in SAM ovens will be maintained at 30 mb pressure with a He carrier gas flowing at 1 sccm. We have previously characterized the thermal and evolved gas behaviors of volatile-bearing species under reduced pressure conditions that simulated operating conditions of the Thermal and Evolved Gas Analyzer (TEGA) that was onboard the 2007 Mars Phoenix Scout Mission [e.g., 2-8]. TEGA ovens operated at 12 mb pressure with a N2 carrier gas flowing at 0.04 sccm. Another key difference between SAM and TEGA is that TEGA was able to perform differential scanning calorimetry whereas SAM only has a pyrolysis oven. The operating conditions for TEGA and SAM have several key parameter differences including operating pressure (12 vs 30 mb), carrier gas (N2 vs. He), and carrier gas flow rate (0.04 vs 1 sccm). The objectives of this study are to characterize the thermal and evolved gas analysis of calcite under SAM operating conditions and then compare it to calcite thermal and evolved gas analysis under TEGA operating conditions.

Analysis of Relationships between the Level of Errors in Leg and Monofin Movement and Stroke Parameters in Monofin Swimming

PubMed Central

Rejman, Marek

2013-01-01

The aim of this study was to analyze the error structure in propulsive movements with regard to its influence on monofin swimming speed. The random cycles performed by six swimmers were filmed during a progressive test (900m). An objective method to estimate errors committed in the area of angular displacement of the feet and monofin segments was employed. The parameters were compared with a previously described model. Mutual dependences between the level of errors, stroke frequency, stroke length and amplitude in relation to swimming velocity were analyzed. The results showed that proper foot movements and the avoidance of errors, arising at the distal part of the fin, ensure the progression of swimming speed. The individual stroke parameters distribution which consists of optimally increasing stroke frequency to the maximal possible level that enables the stabilization of stroke length leads to the minimization of errors. Identification of key elements in the stroke structure based on the analysis of errors committed should aid in improving monofin swimming technique. Key points The monofin swimming technique was evaluated through the prism of objectively defined errors committed by the swimmers. The dependences between the level of errors, stroke rate, stroke length and amplitude in relation to swimming velocity were analyzed. Optimally increasing stroke rate to the maximal possible level that enables the stabilization of stroke length leads to the minimization of errors. Propriety foot movement and the avoidance of errors arising at the distal part of fin, provide for the progression of swimming speed. The key elements improving monofin swimming technique, based on the analysis of errors committed, were designated. PMID:24149742

Moisture Performance of High-R Wall Systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shah, Nay B.; Kochkin, Vladimir

High-performance homes offer improved comfort, lower utility bills, and assured durability. The next generation of building enclosures is a key step toward achieving high-performance goals through decreasing energy load demand and enabling advanced space-conditioning systems. Yet the adoption of high-R enclosures and particularly high-R walls has been a slow-growing trend because mainstream builders are hesitant to make the transition. In a survey of builders on this topic, one of the challenges identifi ed is an industry-wide concern about the long-term moisture performance of energy-effi cient walls. This study takes a step toward addressing this concern through direct monitoring of themore » moisture performance of high-R walls in occupied homes in several climate zones. In addition, the robustness of the design and modeling tools for selecting high-R wall solutions is evaluated using the monitored data from the field. The information and knowledge gained through this research will provide an objective basis for decision-making so that builders can implement advanced designs with confidence.« less

Picking ChIP-seq peak detectors for analyzing chromatin modification experiments

PubMed Central

Micsinai, Mariann; Parisi, Fabio; Strino, Francesco; Asp, Patrik; Dynlacht, Brian D.; Kluger, Yuval

2012-01-01

Numerous algorithms have been developed to analyze ChIP-Seq data. However, the complexity of analyzing diverse patterns of ChIP-Seq signals, especially for epigenetic marks, still calls for the development of new algorithms and objective comparisons of existing methods. We developed Qeseq, an algorithm to detect regions of increased ChIP read density relative to background. Qeseq employs critical novel elements, such as iterative recalibration and neighbor joining of reads to identify enriched regions of any length. To objectively assess its performance relative to other 14 ChIP-Seq peak finders, we designed a novel protocol based on Validation Discriminant Analysis (VDA) to optimally select validation sites and generated two validation datasets, which are the most comprehensive to date for algorithmic benchmarking of key epigenetic marks. In addition, we systematically explored a total of 315 diverse parameter configurations from these algorithms and found that typically optimal parameters in one dataset do not generalize to other datasets. Nevertheless, default parameters show the most stable performance, suggesting that they should be used. This study also provides a reproducible and generalizable methodology for unbiased comparative analysis of high-throughput sequencing tools that can facilitate future algorithmic development. PMID:22307239

Failure Analysis of Multilayered Suspension Plasma-Sprayed Thermal Barrier Coatings for Gas Turbine Applications

NASA Astrophysics Data System (ADS)

Gupta, M.; Markocsan, N.; Rocchio-Heller, R.; Liu, J.; Li, X.-H.; Östergren, L.

2018-02-01

Improvement in the performance of thermal barrier coatings (TBCs) is one of the key objectives for further development of gas turbine applications. The material most commonly used as TBC topcoat is yttria-stabilized zirconia (YSZ). However, the usage of YSZ is limited by the operating temperature range which in turn restricts the engine efficiency. Materials such as pyrochlores, perovskites, rare earth garnets are suitable candidates which could replace YSZ as they exhibit lower thermal conductivity and higher phase stability at elevated temperatures. The objective of this work was to investigate different multilayered TBCs consisting of advanced topcoat materials fabricated by suspension plasma spraying (SPS). The investigated topcoat materials were YSZ, dysprosia-stabilized zirconia, gadolinium zirconate, and ceria-yttria-stabilized zirconia. All topcoats were deposited by TriplexPro-210TM plasma spray gun and radial injection of suspension. Lifetime of these samples was examined by thermal cyclic fatigue and thermal shock testing. Microstructure analysis of as-sprayed and failed specimens was performed with scanning electron microscope. The failure mechanisms in each case have been discussed in this article. The results show that SPS could be a promising route to produce multilayered TBCs for high-temperature applications.

Picking ChIP-seq peak detectors for analyzing chromatin modification experiments.

PubMed

Micsinai, Mariann; Parisi, Fabio; Strino, Francesco; Asp, Patrik; Dynlacht, Brian D; Kluger, Yuval

2012-05-01

Numerous algorithms have been developed to analyze ChIP-Seq data. However, the complexity of analyzing diverse patterns of ChIP-Seq signals, especially for epigenetic marks, still calls for the development of new algorithms and objective comparisons of existing methods. We developed Qeseq, an algorithm to detect regions of increased ChIP read density relative to background. Qeseq employs critical novel elements, such as iterative recalibration and neighbor joining of reads to identify enriched regions of any length. To objectively assess its performance relative to other 14 ChIP-Seq peak finders, we designed a novel protocol based on Validation Discriminant Analysis (VDA) to optimally select validation sites and generated two validation datasets, which are the most comprehensive to date for algorithmic benchmarking of key epigenetic marks. In addition, we systematically explored a total of 315 diverse parameter configurations from these algorithms and found that typically optimal parameters in one dataset do not generalize to other datasets. Nevertheless, default parameters show the most stable performance, suggesting that they should be used. This study also provides a reproducible and generalizable methodology for unbiased comparative analysis of high-throughput sequencing tools that can facilitate future algorithmic development.

Approaches to chronic disease management evaluation in use in Europe: a review of current methods and performance measures.

PubMed

Conklin, Annalijn; Nolte, Ellen; Vrijhoef, Hubertus

2013-01-01

An overview was produced of approaches currently used to evaluate chronic disease management in selected European countries. The study aims to describe the methods and metrics used in Europe as a first to help advance the methodological basis for their assessment. A common template for collection of evaluation methods and performance measures was sent to key informants in twelve European countries; responses were summarized in tables based on template evaluation categories. Extracted data were descriptively analyzed. Approaches to the evaluation of chronic disease management vary widely in objectives, designs, metrics, observation period, and data collection methods. Half of the reported studies used noncontrolled designs. The majority measure clinical process measures, patient behavior and satisfaction, cost and utilization; several also used a range of structural indicators. Effects are usually observed over 1 or 3 years on patient populations with a single, commonly prevalent, chronic disease. There is wide variation within and between European countries on approaches to evaluating chronic disease management in their objectives, designs, indicators, target audiences, and actors involved. This study is the first extensive, international overview of the area reported in the literature.

Lithium rescues synaptic plasticity and memory in Down syndrome mice

PubMed Central

Contestabile, Andrea; Greco, Barbara; Ghezzi, Diego; Tucci, Valter; Benfenati, Fabio; Gasparini, Laura

2012-01-01

Down syndrome (DS) patients exhibit abnormalities of hippocampal-dependent explicit memory, a feature that is replicated in relevant mouse models of the disease. Adult hippocampal neurogenesis, which is impaired in DS and other neuropsychiatric diseases, plays a key role in hippocampal circuit plasticity and has been implicated in learning and memory. However, it remains unknown whether increasing adult neurogenesis improves hippocampal plasticity and behavioral performance in the multifactorial context of DS. We report that, in the Ts65Dn mouse model of DS, chronic administration of lithium, a clinically used mood stabilizer, promoted the proliferation of neuronal precursor cells through the pharmacological activation of the Wnt/β-catenin pathway and restored adult neurogenesis in the hippocampal dentate gyrus (DG) to physiological levels. The restoration of adult neurogenesis completely rescued the synaptic plasticity of newborn neurons in the DG and led to the full recovery of behavioral performance in fear conditioning, object location, and novel object recognition tests. These findings indicate that reestablishing a functional population of hippocampal newborn neurons in adult DS mice rescues hippocampal plasticity and memory and implicate adult neurogenesis as a promising therapeutic target to alleviate cognitive deficits in DS patients. PMID:23202733

Towards standardized assessment of endoscope optical performance: geometric distortion

NASA Astrophysics Data System (ADS)

Wang, Quanzeng; Desai, Viraj N.; Ngo, Ying Z.; Cheng, Wei-Chung; Pfefer, Joshua

2013-12-01

Technological advances in endoscopes, such as capsule, ultrathin and disposable devices, promise significant improvements in safety, clinical effectiveness and patient acceptance. Unfortunately, the industry lacks test methods for preclinical evaluation of key optical performance characteristics (OPCs) of endoscopic devices that are quantitative, objective and well-validated. As a result, it is difficult for researchers and developers to compare image quality and evaluate equivalence to, or improvement upon, prior technologies. While endoscope OPCs include resolution, field of view, and depth of field, among others, our focus in this paper is geometric image distortion. We reviewed specific test methods for distortion and then developed an objective, quantitative test method based on well-defined experimental and data processing steps to evaluate radial distortion in the full field of view of an endoscopic imaging system. Our measurements and analyses showed that a second-degree polynomial equation could well describe the radial distortion curve of a traditional endoscope. The distortion evaluation method was effective for correcting the image and can be used to explain other widely accepted evaluation methods such as picture height distortion. Development of consensus standards based on promising test methods for image quality assessment, such as the method studied here, will facilitate clinical implementation of innovative endoscopic devices.

[Priority setting of health interventions. Review of criteria, approaches and role of assessment agencies].

PubMed

Varela-Lema, Leonor; Atienza-Merino, Gerardo; López-García, Marisa

This study was carried out to develop an explicit health priority setting methodology to support decision-making regarding the technologies to be assessed for inclusion in the National Health Service service portfolio. The primary objective is to identify and analyse the criteria, approaches and conceptual frameworks used for national/international priority setting. An exhaustive review of the literature was carried out. For this purpose, a search of the main biomedical databases was performed and assessment agency websites were reviewed, among other sources. In general terms, it was found that there are no standardised criteria for priority setting, although some consensus and common trends have been identified regarding key elements (criteria, models and strategies, key actors, etc.). Globally, 8 key domains were identified: 1) need for intervention; 2) health outcomes; 3) type of benefit of the intervention; 4) economic consequences; 5) existing knowledge on the intervention/quality of and uncertainties regarding the evidence; 6) implementation and complexity of the intervention/feasibility; 7) priority, justice and ethics; and 8) overall context. The review provides a thorough analysis of the relevant issues and offers key recommendations regarding considerations for developing a national prioritisation framework. Findings are envisioned to be useful for different public organisations that are aiming to establish healthcare priorities. Copyright © 2016 SESPAS. Publicado por Elsevier España, S.L.U. All rights reserved.

Performance Analysis of MYSEA

DTIC Science & Technology

2012-09-01

Services FSD Federated Services Daemon I&A Identification and Authentication IKE Internet Key Exchange KPI Key Performance Indicator LAN Local Area...spection takes place in different processes in the server architecture. Key Performance Indica- tor ( KPI )s associated with the system need to be...application and risk analysis of security controls. Thus, measurement of the KPIs is needed before an informed tradeoff between the performance penalties

Telestroke network fundamentals.

PubMed

Meyer, Brett C; Demaerschalk, Bart M

2012-10-01

The objectives of this manuscript are to identify key components to maintaining the logistic and/or operational sustainability of a telestroke network, to identify best practices to be considered for assessment and management of acute stroke when planning for and developing a telestroke network, to show practical steps to enable progress toward implementing a telestroke solution for optimizing acute stroke care, to incorporate evidence-based practice guidelines and care pathways into a telestroke network, to emphasize technology variables and options, and to propose metrics to use when determining the performance, outcomes, and quality of a telestroke network. Copyright © 2012 National Stroke Association. Published by Elsevier Inc. All rights reserved.

An Overview of the Quality Function Deployment (QFD) Technique

NASA Technical Reports Server (NTRS)

Sherif, Josef S.; Tran, Tuyet-Lan

1995-01-01

QFD is a product planning tool and a process methodology that enables all organizations, departments, and individuals in a business or a project to systematically focus on the critical performance, functions, and/or characteristics of a product that are the most important to the customer. It is part of the Total Quality Management (TQM) concept.. This presentation describes the objectives of QFD, the process for implementing the technique, the benefits derived from proper implementation, the kinds of systems where QFD is best utilized, what the success factors are, how QFD works, some guidelines for selection of a QFD team, and the functional roles of key team members.

An efficient wireless power transfer system with security considerations for electric vehicle applications

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhang, Zhen; Chau, K. T., E-mail: ktchau@eee.hku.hk; Liu, Chunhua

2014-05-07

This paper presents a secure inductive wireless power transfer (WPT) system for electric vehicle (EV) applications, such as charging the electric devices inside EVs and performing energy exchange between EVs. The key is to employ chaos theory to encrypt the wirelessly transferred energy which can then be decrypted by specific receptors in the multi-objective system. In this paper, the principle of encrypted WPT is first revealed. Then, computer simulation is conducted to validate the feasibility of the proposed system. Moreover, by comparing the WPT systems with and without encryption, the proposed energy encryption scheme does not involve noticeable power consumption.

An Assessment of the State-of-the-art in Multidisciplinary Aeromechanical Analyses

NASA Technical Reports Server (NTRS)

Datta, Anubhav; Johnson, Wayne

2008-01-01

This paper presents a survey of the current state-of-the-art in multidisciplinary aeromechanical analyses which integrate advanced Computational Structural Dynamics (CSD) and Computational Fluid Dynamics (CFD) methods. The application areas to be surveyed include fixed wing aircraft, turbomachinery, and rotary wing aircraft. The objective of the authors in the present paper, together with a companion paper on requirements, is to lay out a path for a High Performance Computing (HPC) based next generation comprehensive rotorcraft analysis. From this survey of the key technologies in other application areas it is possible to identify the critical technology gaps that stem from unique rotorcraft requirements.

Regenerator matrix physical property data

NASA Technical Reports Server (NTRS)

Fucinari, C. A.

1980-01-01

Among several cellular ceramic structures manufactured by various suppliers for regenerator application in a gas turbine engine, three have the best potential for achieving durability and performance objectives for use in gas turbines, Stirling engines, and waste heat recovery systems: (1) an aluminum-silicate sinusoidal flow passage made from a corrugated wate paper process; (2) an extruded isosceles triangle flow passage; and (3) a second generation matrix incorporating a square flow passage formed by an embossing process. Key physical and thermal property data for these configurations presented include: heat transfer and pressure drop characteristics, compressive strength, tensile strength and elasticity, thermal expansion characteristics, chanical attack, and thermal stability.

A musculoskeletal model of the elbow joint complex

NASA Technical Reports Server (NTRS)

Gonzalez, Roger V.; Barr, Ronald E.; Abraham, Lawrence D.

1993-01-01

This paper describes a musculoskeletal model that represents human elbow flexion-extension and forearm pronation-supination. Musculotendon parameters and the skeletal geometry were determined for the musculoskeletal model in the analysis of ballistic elbow joint complex movements. The key objective was to develop a computational model, guided by optimal control, to investigate the relationship among patterns of muscle excitation, individual muscle forces, and movement kinematics. The model was verified using experimental kinematic, torque, and electromyographic data from volunteer subjects performing both isometric and ballistic elbow joint complex movements. In general, the model predicted kinematic and muscle excitation patterns similar to what was experimentally measured.

Development of Risk Insights for Regulatory Review of a Near-Surface Disposal Facility for Radioactive Waste

DOE Office of Scientific and Technical Information (OSTI.GOV)

Esh, D.W.; Ridge, A.C.; Thaggard, M.

2006-07-01

Section 3116 of the Ronald W. Reagan National Defense Authorization Act for Fiscal Year 2005 (NDAA) requires the Department of Energy (DOE) to consult with the Nuclear Regulatory Commission (NRC) about non-High Level Waste (HLW) determinations. In its consultative role, NRC performs technical reviews of DOE's waste determinations but does not have regulatory authority over DOE's waste disposal activities. The safety of disposal is evaluated by comparing predicted disposal facility performance to the performance objectives specified in NRC regulations for the disposal of low-level waste (10 CFR Part 61 Subpart C). The performance objectives contain criteria for protection of themore » public, protection of inadvertent intruders, protection of workers, and stability of the disposal site after closure. The potential radiological dose to receptors typically is evaluated with a performance assessment (PA) model that simulates the release of radionuclides from the disposal site, transport of radionuclides through the environment, and exposure of potential receptors to residual contamination for thousands of years. This paper describes NRC's development and use of independent performance assessment modeling to facilitate review of DOE's non-HLW determination for the Saltstone Disposal Facility (SDF) at the Savannah River Site. NRC's review of the safety of near-surface disposal of radioactive waste at the SDF was facilitated and focused by risk insights developed with an independent PA model. The main components of NRC's performance assessment model are presented. The development of risk insights that allow the staff to focus review efforts on those areas that are most important to satisfying the performance objectives is discussed. Uncertainty analysis was performed of the full stochastic model using genetic variable selection algorithms. The results of the uncertainty analysis were then used to guide the development of simulations of other scenarios to understand the key risk drivers and risk limiters of the SDF. Review emphasis was placed on those aspects of the disposal system that were expected to drive performance: the physical and chemical performance of the cementitious wasteform and concrete vaults. Refinement of the modeling of the degradation and release from the cementitious wasteform had a significant effect on the predicted dose to a member of the public. (authors)« less

Sensors for process control Focus Team report

NASA Astrophysics Data System (ADS)

At the Semiconductor Technology Workshop, held in November 1992, the Semiconductor Industry Association (SIA) convened 179 semiconductor technology experts to assess the 15-year outlook for the semiconductor manufacturing industry. The output of the Workshop, a document entitled 'Semiconductor Technology: Workshop Working Group Reports,' contained an overall roadmap for the technology characteristics envisioned in integrated circuits (IC's) for the period 1992-2007. In addition, the document contained individual roadmaps for numerous key areas in IC manufacturing, such as film deposition, thermal processing, manufacturing systems, exposure technology, etc. The SIA Report did not contain a separate roadmap for contamination free manufacturing (CFM). A key component of CFM for the next 15 years is the use of sensors for (1) defect reduction, (2) improved product quality, (3) improved yield, (4) improved tool utilization through contamination reduction, and (5) real time process control in semiconductor fabrication. The objective of this Focus Team is to generate a Sensors for Process Control Roadmap. Implicit in this objective is the identification of gaps in current sensor technology so that research and development activity in the sensor industry can be stimulated to develop sensor systems capable of meeting the projected roadmap needs. Sensor performance features of interest include detection limit, specificity, sensitivity, ease of installation and maintenance, range, response time, accuracy, precision, ease and frequency of calibration, degree of automation, and adaptability to in-line process control applications.

Developing a Social, Cultural and Economic Report Card for a Regional Industrial Harbour.

PubMed

Pascoe, Sean; Tobin, Renae; Windle, Jill; Cannard, Toni; Marshall, Nadine; Kabir, Zobaidul; Flint, Nicole

2016-01-01

Report cards are increasingly used to provide ongoing snap-shots of progress towards specific ecosystem health goals, particularly in coastal regions where planners need to balance competing demands for coastal resources from a range of industries. While most previous report cards focus on the biophysical components of the system, there is a growing interest in including the social and economic implications of ecosystem management to provide a greater social-ecological system understanding. Such a report card was requested on the Gladstone Harbour area in central Queensland, Australia. Gladstone Harbour adjoins the southern Great Barrier Reef, and is also a major industrial and shipping port. Balancing social, economic and environmental interests is therefore of great concern to the regional managers. While environmental benchmarking procedures are well established within Australia (and elsewhere), a method for assessing social and economic performance of coastal management is generally lacking. The key aim of this study was to develop and pilot a system for the development of a report card relating to appropriate cultural, social and economic objectives. The approach developed uses a range of multicriteria decision analysis methods to assess and combine different qualitative and quantitative measures, including the use of Bayesian Belief Networks to combine the different measures and provide an overall quantitative score for each of the key management objectives. The approach developed is readily transferable for purposes of similar assessments in other regions.

Developing a Social, Cultural and Economic Report Card for a Regional Industrial Harbour

PubMed Central

Pascoe, Sean; Tobin, Renae; Windle, Jill; Cannard, Toni; Marshall, Nadine; Kabir, Zobaidul; Flint, Nicole

2016-01-01

Report cards are increasingly used to provide ongoing snap-shots of progress towards specific ecosystem health goals, particularly in coastal regions where planners need to balance competing demands for coastal resources from a range of industries. While most previous report cards focus on the biophysical components of the system, there is a growing interest in including the social and economic implications of ecosystem management to provide a greater social-ecological system understanding. Such a report card was requested on the Gladstone Harbour area in central Queensland, Australia. Gladstone Harbour adjoins the southern Great Barrier Reef, and is also a major industrial and shipping port. Balancing social, economic and environmental interests is therefore of great concern to the regional managers. While environmental benchmarking procedures are well established within Australia (and elsewhere), a method for assessing social and economic performance of coastal management is generally lacking. The key aim of this study was to develop and pilot a system for the development of a report card relating to appropriate cultural, social and economic objectives. The approach developed uses a range of multicriteria decision analysis methods to assess and combine different qualitative and quantitative measures, including the use of Bayesian Belief Networks to combine the different measures and provide an overall quantitative score for each of the key management objectives. The approach developed is readily transferable for purposes of similar assessments in other regions. PMID:26839949

Classification and Feature Selection Algorithms for Modeling Ice Storm Climatology

NASA Astrophysics Data System (ADS)

Swaminathan, R.; Sridharan, M.; Hayhoe, K.; Dobbie, G.

2015-12-01

Ice storms account for billions of dollars of winter storm loss across the continental US and Canada. In the future, increasing concentration of human populations in areas vulnerable to ice storms such as the northeastern US will only exacerbate the impacts of these extreme events on infrastructure and society. Quantifying the potential impacts of global climate change on ice storm prevalence and frequency is challenging, as ice storm climatology is driven by complex and incompletely defined atmospheric processes, processes that are in turn influenced by a changing climate. This makes the underlying atmospheric and computational modeling of ice storm climatology a formidable task. We propose a novel computational framework that uses sophisticated stochastic classification and feature selection algorithms to model ice storm climatology and quantify storm occurrences from both reanalysis and global climate model outputs. The framework is based on an objective identification of ice storm events by key variables derived from vertical profiles of temperature, humidity and geopotential height. Historical ice storm records are used to identify days with synoptic-scale upper air and surface conditions associated with ice storms. Evaluation using NARR reanalysis and historical ice storm records corresponding to the northeastern US demonstrates that an objective computational model with standard performance measures, with a relatively high degree of accuracy, identify ice storm events based on upper-air circulation patterns and provide insights into the relationships between key climate variables associated with ice storms.

International Perspective on Teaching Human Sexuality

ERIC Educational Resources Information Center

Wylie, Kevan; Weerakoon, Patricia

2010-01-01

Objective: The authors outline international training programs in human sexuality. Methods: The authors reviewed the international literature and Internet resources to identify key training opportunities and curricula, with particular emphasis on training opportunities for psychiatrists. Results: The authors outline key resources and training…

Excitation-emission fluorimeter based on linear interference filters.

PubMed

Gouzman, Michael; Lifshitz, Nadia; Luryi, Serge; Semyonov, Oleg; Gavrilov, Dmitry; Kuzminskiy, Vyacheslav

2004-05-20

We describe the design, properties, and performance of an excitation-emission (EE) fluorimeter that enables spectral characterization of an object simultaneously with respect to both its excitation and its emission properties. Such devices require two wavelength-selecting elements, one in the optical path of the excitation broadband light to obtain tunable excitation and the other to analyze the resulting fluorescence. Existing EE instruments are usually implemented with two monochromators. The key feature of our EE fluorimeter is that it employs lightweight and compact linear interference filters (LIFs) as the wavelength-selection elements. The spectral tuning of both the excitation and the detection LIFs is achieved by their mechanical shift relative to each other by use of two computer-controlled linear step motors. The performance of the LIF-based EE fluorimeter is demonstrated with the fluorescent spectra of various dyes and their mixtures.

The Development of Dynamic Human Reliability Analysis Simulations for Inclusion in Risk Informed Safety Margin Characterization Frameworks

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jeffrey C. Joe; Diego Mandelli; Ronald L. Boring

2015-07-01

The United States Department of Energy is sponsoring the Light Water Reactor Sustainability program, which has the overall objective of supporting the near-term and the extended operation of commercial nuclear power plants. One key research and development (R&D) area in this program is the Risk-Informed Safety Margin Characterization pathway, which combines probabilistic risk simulation with thermohydraulic simulation codes to define and manage safety margins. The R&D efforts to date, however, have not included robust simulations of human operators, and how the reliability of human performance or lack thereof (i.e., human errors) can affect risk-margins and plant performance. This paper describesmore » current and planned research efforts to address the absence of robust human reliability simulations and thereby increase the fidelity of simulated accident scenarios.« less

The Influence of Leadership in Implementing Management Systems

NASA Astrophysics Data System (ADS)

Nae, Ilie; Solomon, Gheorghe; Severin, Irina

2014-12-01

This paper presents a new perspective of the implementation of Management Systems within organizations in order to increase the success rate. The objective is to analyse how the leadership could influence positively or negatively the implementation, according to the leadership approach chosen. It offers a method to analyse the maturity of the leadership for any organization, based on existing leadership models, completing these models with specificities of a Management System. The Maturity Grid is extended to key elements of the Organizational Leadership: Strategic Planning, Process and Performance. The results expected are to change the current understanding of leadership during a Management System implementation(leadership seen as a principle) to an active leadership, implemented at organizational level. It propose an alternative of the classic management approach, to a Performance Management approach, that integrates naturally the leadership in all processes and methods

Exploration Roadmap Working Group (ERWG) Data Collection, NASA's Inputs

NASA Technical Reports Server (NTRS)

Drake, Bret; Landis, Rob; Thomas, Andrew; Mauzy, Susan; Graham, Lee; Culbert, Chris; Troutman, Pat

2010-01-01

This slide presentation reviews four areas for further space exploration: (1) Human Exploration of Mars Design Reference Architecture (DRA) 5.0, (2) Robotic Precursors targeting Near Earth Objects (NEO) for Human Exploration, (3) Notional Human Exploration of Near Earth Objects and (4) Low Earth Orbit (LEO) Refueling to Augment Human Exploration. The first presentation reviews the goals and objectives of the Mars DRA, presents a possible mission profile, innovation requirements for the mission and key risks and challenges for human exploration of Mars. The second presentation reviews the objective and goals of the robotic precursors to the NEO and the mission profile of such robotic exploration. The third presentation reviews the mission scenario of human exploration of NEO, the objectives and goals, the mission operational drivers, the key technology needs and a mission profile. The fourth and last presentation reviews the examples of possible refueling in low earth orbit prior to lunar orbit insertion, to allow for larger delivered payloads for a lunar mission.

Parts, Cavities, and Object Representation in Infancy

ERIC Educational Resources Information Center

Hayden, Angela; Bhatt, Ramesh S.; Kangas, Ashley; Zieber, Nicole

2011-01-01

Part representation is not only critical to object perception but also plays a key role in a number of basic visual cognition functions, such as figure-ground segregation, allocation of attention, and memory for shapes. Yet, virtually nothing is known about the development of part representation. If parts are fundamental components of object shape…

Study of Vermont: A Curriculum Designed for Grades 4-6.

ERIC Educational Resources Information Center

Dubuque, Martha L.

Designed for use in grades 4-6, this guide consists of four basic units related to the study of Vermont: Indian Civilization, Vermont History, Geography and Economics, and Cities and Towns. Each unit lists key concepts, content objectives, skills objectives, and related objectives. Next, specialized vocabulary as well as common, essential…

An Assistant for Loading Learning Object Metadata: An Ontology Based Approach

ERIC Educational Resources Information Center

Casali, Ana; Deco, Claudia; Romano, Agustín; Tomé, Guillermo

2013-01-01

In the last years, the development of different Repositories of Learning Objects has been increased. Users can retrieve these resources for reuse and personalization through searches in web repositories. The importance of high quality metadata is key for a successful retrieval. Learning Objects are described with metadata usually in the standard…

The Effect of Grammatical Gender on Object Categorization

ERIC Educational Resources Information Center

Cubelli, Roberto; Paolieri, Daniela; Lotto, Lorella; Job, Remo

2011-01-01

In 3 experiments, we investigated the effect of grammatical gender on object categorization. Participants were asked to judge whether 2 objects, whose names did or did not share grammatical gender, belonged to the same semantic category by pressing a key. Monolingual speakers of English (Experiment 1), Italian (Experiments 1 and 2), and Spanish…

Feature Binding in Visual Working Memory Evaluated by Type Identification Paradigm

ERIC Educational Resources Information Center

Saiki, Jun; Miyatsuji, Hirofumi

2007-01-01

Memory for feature binding comprises a key ingredient in coherent object representations. Previous studies have been equivocal about human capacity for objects in the visual working memory. To evaluate memory for feature binding, a type identification paradigm was devised and used with a multiple-object permanence tracking task. Using objects…

Neurocognitive development of the ability to manipulate information in working memory.

PubMed

Crone, Eveline A; Wendelken, Carter; Donohue, Sarah; van Leijenhorst, Linda; Bunge, Silvia A

2006-06-13

The ability to manipulate information in working memory is a key factor in cognitive development. Here, we used event-related functional MRI to test the hypothesis that developmental improvements in manipulation, relative to pure maintenance, are associated with increased recruitment of dorsolateral (DL) prefrontal cortex (PFC) and superior parietal cortex. Three age groups (8-12 years old, 13-17 years old, and 18-25 years old) performed an object-working memory task with separate maintenance and manipulation conditions. We found that 8- to 12-year-olds did not perform the task as well as adolescents or adults, particularly on trials requiring manipulation in addition to maintenance. In this study, no age differences were observed in the activation profile of ventrolateral PFC, a region associated with online maintenance. In contrast, unlike the older participants, 8- to 12-year-olds failed to recruit right DL PFC and bilateral superior parietal cortex during the delay period for manipulation relative to maintenance. This group difference was observed specifically during the delay period, while participants reordered items in working memory, and could not be accounted for by group differences in performance. Across participants, activation levels in right DL PFC and superior parietal cortex, but not ventrolateral PFC, were positively correlated with performance on manipulation trials. These results indicate that increased recruitment of right DL PFC and bilateral parietal cortex during adolescence is associated with improvements in the ability to work with object representations.

Emotion modulates eye movement patterns and subsequent memory for the gist and details of movie scenes.

PubMed

Subramanian, Ramanathan; Shankar, Divya; Sebe, Nicu; Melcher, David

2014-03-26

A basic question in vision research regards where people look in complex scenes and how this influences their performance in various tasks. Previous studies with static images have demonstrated a close link between where people look and what they remember. Here, we examined the pattern of eye movements when participants watched neutral and emotional clips from Hollywood-style movies. Participants answered multiple-choice memory questions concerning visual and auditory scene details immediately upon viewing 1-min-long neutral or emotional movie clips. Fixations were more narrowly focused for emotional clips, and immediate memory for object details was worse compared to matched neutral scenes, implying preferential attention to emotional events. Although we found the expected correlation between where people looked and what they remembered for neutral clips, this relationship broke down for emotional clips. When participants were subsequently presented with key frames (static images) extracted from the movie clips such that presentation duration of the target objects (TOs) corresponding to the multiple-choice questions was matched and the earlier questions were repeated, more fixations were observed on the TOs, and memory performance also improved significantly, confirming that emotion modulates the relationship between gaze position and memory performance. Finally, in a long-term memory test, old/new recognition performance was significantly better for emotional scenes as compared to neutral scenes. Overall, these results are consistent with the hypothesis that emotional content draws eye fixations and strengthens memory for the scene gist while weakening encoding of peripheral scene details.

High Resolution Near Real Time Image Processing and Support for MSSS Modernization

NASA Astrophysics Data System (ADS)

Duncan, R. B.; Sabol, C.; Borelli, K.; Spetka, S.; Addison, J.; Mallo, A.; Farnsworth, B.; Viloria, R.

2012-09-01

This paper describes image enhancement software applications engineering development work that has been performed in support of Maui Space Surveillance System (MSSS) Modernization. It also includes R&D and transition activity that has been performed over the past few years with the objective of providing increased space situational awareness (SSA) capabilities. This includes Air Force Research Laboratory (AFRL) use of an FY10 Dedicated High Performance Investment (DHPI) cluster award -- and our selection and planned use for an FY12 DHPI award. We provide an introduction to image processing of electro optical (EO) telescope sensors data; and a high resolution image enhancement and near real time processing and summary status overview. We then describe recent image enhancement applications development and support for MSSS Modernization, results to date, and end with a discussion of desired future development work and conclusions. Significant improvements to image processing enhancement have been realized over the past several years, including a key application that has realized more than a 10,000-times speedup compared to the original R&D code -- and a greater than 72-times speedup over the past few years. The latest version of this code maintains software efficiency for post-mission processing while providing optimization for image processing of data from a new EO sensor at MSSS. Additional work has also been performed to develop low latency, near real time processing of data that is collected by the ground-based sensor during overhead passes of space objects.

Selecting a Persistent Data Support Environment for Object-Oriented Applications

DTIC Science & Technology

1998-03-01

key features of most object DBMS products is contained in the <DWAS 9{eeds Assessment for Objects from Barry and Associates. The developer should...data structure and behavior in a self- contained module enhances maintainability of the system and promotes reuse of modules for similar domains...considered together, represent a survey of commercial object-oriented database management systems. These references contain detailed information needed

Topical video object discovery from key frames by modeling word co-occurrence prior.

PubMed

Zhao, Gangqiang; Yuan, Junsong; Hua, Gang; Yang, Jiong

2015-12-01

A topical video object refers to an object, that is, frequently highlighted in a video. It could be, e.g., the product logo and the leading actor/actress in a TV commercial. We propose a topic model that incorporates a word co-occurrence prior for efficient discovery of topical video objects from a set of key frames. Previous work using topic models, such as latent Dirichelet allocation (LDA), for video object discovery often takes a bag-of-visual-words representation, which ignored important co-occurrence information among the local features. We show that such data driven co-occurrence information from bottom-up can conveniently be incorporated in LDA with a Gaussian Markov prior, which combines top-down probabilistic topic modeling with bottom-up priors in a unified model. Our experiments on challenging videos demonstrate that the proposed approach can discover different types of topical objects despite variations in scale, view-point, color and lighting changes, or even partial occlusions. The efficacy of the co-occurrence prior is clearly demonstrated when compared with topic models without such priors.

PATHA: Performance Analysis Tool for HPC Applications

DOE PAGES

Yoo, Wucherl; Koo, Michelle; Cao, Yi; ...

2016-02-18

Large science projects rely on complex workflows to analyze terabytes or petabytes of data. These jobs are often running over thousands of CPU cores and simultaneously performing data accesses, data movements, and computation. It is difficult to identify bottlenecks or to debug the performance issues in these large workflows. In order to address these challenges, we have developed Performance Analysis Tool for HPC Applications (PATHA) using the state-of-art open source big data processing tools. Our framework can ingest system logs to extract key performance measures, and apply the most sophisticated statistical tools and data mining methods on the performance data.more » Furthermore, it utilizes an efficient data processing engine to allow users to interactively analyze a large amount of different types of logs and measurements. To illustrate the functionality of PATHA, we conduct a case study on the workflows from an astronomy project known as the Palomar Transient Factory (PTF). This study processed 1.6 TB of system logs collected on the NERSC supercomputer Edison. Using PATHA, we were able to identify performance bottlenecks, which reside in three tasks of PTF workflow with the dependency on the density of celestial objects.« less

Management practices and performance of mergers and acquisitions in Pakistan: mediating role of psychological contract.

PubMed

Bari, Muhammad Waseem; Fanchen, Meng; Baloch, Muhammad Awais

2016-01-01

The objective of this study is to examine the direct and indirect effect of management practices (procedural justice, coordination approach, communication system, integration strategy, and coping programs) on merger and acquisition (M&A) performance in the Pakistan banking industry. Psychological contract (PC) acts as a mediator between Management practices and M&A performance. The Present study distributes a structured questionnaire to 700 bank employees of different management cadres. The useful response rate is 76 % (536 employees). It uses PLS-SEM technique for data analysis. (1) procedural justice is a key strategy which has highly significant direct and indirect effect on M&A performance; however integration strategy and the communication system have an only direct effect. (2) PC performs partial mediation at different levels between management practices and M&A financial and non-financial performance. This study provides an effective solution to solve the soft issues during and post-M&A process. This is one of the few studies which effectively integrate the five constructs into a single framework to study their effects on M&A performance. Limitations and future research directions are presented in the last section of the study.

The Development of Object Function and Manipulation Knowledge: Evidence from a Semantic Priming Study

PubMed Central

Collette, Cynthia; Bonnotte, Isabelle; Jacquemont, Charlotte; Kalénine, Solène; Bartolo, Angela

2016-01-01

Object semantics include object function and manipulation knowledge. Function knowledge refers to the goal attainable by using an object (e.g., the function of a key is to open or close a door) while manipulation knowledge refers to gestures one has to execute to use an object appropriately (e.g., a key is held between the thumb and the index, inserted into the door lock and then turned). To date, several studies have assessed function and manipulation knowledge in brain lesion patients as well as in healthy adult populations. In patients with left brain damage, a double dissociation between these two types of knowledge has been reported; on the other hand, behavioral studies in healthy adults show that function knowledge is processed faster than manipulation knowledge. Empirical evidence has shown that object interaction in children differs from that in adults, suggesting that the access to function and manipulation knowledge in children might also differ. To investigate the development of object function and manipulation knowledge, 51 typically developing 8-9-10 year-old children and 17 healthy young adults were tested on a naming task associated with a semantic priming paradigm (190-ms SOA; prime duration: 90 ms) in which a series of line drawings of manipulable objects were used. Target objects could be preceded by three priming contexts: related (e.g., knife-scissors for function; key-screwdriver for manipulation), unrelated but visually similar (e.g., glasses-scissors; baseball bat-screwdriver), and purely unrelated (e.g., die-scissors; tissue-screwdriver). Results showed a different developmental pattern of function and manipulation priming effects. Function priming effects were not present in children and emerged only in adults, with faster naming responses for targets preceded by objects sharing the same function. In contrast, manipulation priming effects were already present in 8-year-olds with faster naming responses for targets preceded by objects sharing the same manipulation and these decreased linearly between 8 and 10 years of age, 10-year-olds not differing from adults. Overall, results show that the access to object function and manipulation knowledge changes during development by favoring manipulation knowledge in childhood and function knowledge in adulthood. PMID:27602004

Fourier-Mellin moment-based intertwining map for image encryption

NASA Astrophysics Data System (ADS)

Kaur, Manjit; Kumar, Vijay

2018-03-01

In this paper, a robust image encryption technique that utilizes Fourier-Mellin moments and intertwining logistic map is proposed. Fourier-Mellin moment-based intertwining logistic map has been designed to overcome the issue of low sensitivity of an input image. Multi-objective Non-Dominated Sorting Genetic Algorithm (NSGA-II) based on Reinforcement Learning (MNSGA-RL) has been used to optimize the required parameters of intertwining logistic map. Fourier-Mellin moments are used to make the secret keys more secure. Thereafter, permutation and diffusion operations are carried out on input image using secret keys. The performance of proposed image encryption technique has been evaluated on five well-known benchmark images and also compared with seven well-known existing encryption techniques. The experimental results reveal that the proposed technique outperforms others in terms of entropy, correlation analysis, a unified average changing intensity and the number of changing pixel rate. The simulation results reveal that the proposed technique provides high level of security and robustness against various types of attacks.