Refrigeration Servicing.

ERIC Educational Resources Information Center

Hamilton, Donald L.; And Others

This self-study course is designed to familiarize Marine enlisted personnel with the services required to be performed on refrigeration equipment. The course contains four study units. Each study unit begins with a general objective, which is a statement of what the student should learn from the unit. The study units are divided into numbered work…

Engine Tune-Up Service. Unit 1: Battery and Cranking System. Review Exercise Book. Automotive Mechanics Curriculum.

ERIC Educational Resources Information Center

Goodson-Roberts, Ludy; And Others

This book of pretests and review exercises is designed to accompany the Engine Tune-Up Service Student Guide for Unit 1, Battery and Cranking System. Focus of the exercises and pretests is testing the battery and cranking system. Pretests and performance checklists are provided for each of the four performance objectives contained in the unit.…

Multicentric analysis of performance after major lung resections by using the European Society Objective Score (ESOS).

PubMed

Brunelli, Alessandro; Varela, Gonzalo; Van Schil, Paul; Salati, Michele; Novoa, Nuria; Hendriks, Jeroen M; Jimenez, Marcelo F; Lauwers, Patrick

2008-02-01

Outcome endpoints are still the most widely used indicators of performance. However, they need to be risk-adjusted in order to be reliable instruments of audit. Recently, the European Society Objective Score (ESOS) was developed from the online European Thoracic Surgery Database as an audit tool. In this study, we applied for the first time the ESOS.01 to assess the performance of three European thoracic surgery units during three successive years of activity. This study is a retrospective analysis performed on prospective databases. We analysed 695 patients submitted to pneumonectomy (117) or lobectomy (578) for lung neoplasm at three European dedicated thoracic surgery units (unit A 264 patients, unit B 262, unit C 169) from January 2004 through December 2006. Qualified thoracic surgeons performed all the operations. No patients in this series were in the original ESOS development set. ESOS.01 was used to estimate the risk of in-hospital mortality in all patients. Observed and predicted mortality rates were then compared within each unit by the z-test. Cumulative observed mortality rates in units A, B and C were 2.3% (six cases), 2.7% (seven cases) and 4.1% (seven cases), respectively. We were not able to find statistically significant differences between observed and ESOS-predicted mortality rates. The comparison of risk-adjusted mortality rates between units did not show significant differences (unit A 3.9%, unit B 3.3%, unit C 5.6%). The use of ESOS.01 revealed that the performances of all units were in line with the predicted ones during each period under analysis and did not differ between each other. The results of our study warrant future efforts to refine the ESOS model and to develop other risk-adjusted outcome indicators with the aim to establish European benchmarks of performance.

The role of color in the implicit memory performance of healthy older adults and individuals with Alzheimer's disease.

PubMed

Lloyd-Jones, Toby J

2005-01-01

Although the Alzheimer's disease (AD) patients in this study were severely impaired in recognition performance, their naming performance demonstrated normal priming across transformations in object color. This is evidence for preserved implicit shape-based memory performance in AD patients. For colored-object decision, healthy older adult control participants but not AD patients showed priming for new associations between previously encountered object shapes and colors. The author argues, on the basis of this colored object decision performance, that the deficits present in AD do not allow shape and color to be integrated to form a novel unitized representation that can be used to benefit cognitive performance. 2005 APA

Performance-Based Education Project: A Component of the Institutional Outcomes Model. Course Prototype. U.S. History 121 (HIS121).

ERIC Educational Resources Information Center

John Wood Community Coll., Quincy, IL.

This document is an assessment of a performance-based education project that involved a United States history course, offered at a community college. Thirty-two student performance objectives are outlined and lesson plans designed to achieve each objective are presented. Each lesson plan consists of an instructional topic, prerequisites, interest…

Drafting. Competency Based Curriculum.

ERIC Educational Resources Information Center

Everly, Al; And Others

This competency based drafting curriculum is presented in seven specialization sections with units in each section containing a competency statement, performance objective, learning activities, evaluation, and quiz or problem sheets. Some units also contain answer sheets and/or handout sheets. Sections and number of units presented are (1) basic…

Forestry. Teacher Edition.

ERIC Educational Resources Information Center

Oklahoma State Dept. of Vocational and Technical Education, Stillwater. Curriculum and Instructional Materials Center.

This curriculum is designed to provide training in skills used by technicians and foresters throughout the world who plant, care for, and harvest trees. It contains 16 units. Each instructional unit includes some or all of the basic components of a unit of instruction: performance objectives, suggested activities, handouts, information sheets,…

48 CFR 9904.418-60 - Illustrations.

Code of Federal Regulations, 2014 CFR

2014-10-01

... of which perform various functions on units of the work-in-process of multiple final cost objectives... assembly overhead cost pool. The business unit finds it impractical to use an allocation measure based on... occasionally does significant amounts of work for other activities of the business unit. The labor used in...

48 CFR 9904.418-60 - Illustrations.

Code of Federal Regulations, 2012 CFR

2012-10-01

... of which perform various functions on units of the work-in-process of multiple final cost objectives... assembly overhead cost pool. The business unit finds it impractical to use an allocation measure based on... occasionally does significant amounts of work for other activities of the business unit. The labor used in...

48 CFR 9904.418-60 - Illustrations.

Code of Federal Regulations, 2013 CFR

2013-10-01

... of which perform various functions on units of the work-in-process of multiple final cost objectives... assembly overhead cost pool. The business unit finds it impractical to use an allocation measure based on... occasionally does significant amounts of work for other activities of the business unit. The labor used in...

Diesel Mechanics: Fundamentals.

ERIC Educational Resources Information Center

Foutes, William; And Others

This publication is the first in a series of three texts for a diesel mechanics curriculum. Its purpose is to teach the basic concepts related to employment in a diesel trade. Six sections contain 29 units. Each instructional unit includes some or all of these basic components: unit and specific (performance) objectives, suggested activities for…

Medical-Surgical II. Teacher Edition.

ERIC Educational Resources Information Center

Oklahoma State Dept. of Vocational and Technical Education, Stillwater. Curriculum and Instructional Materials Center.

This publication is designed to provide students with the knowledge they need to pursue a career in medical-surgical nursing. Fifteen units are provided. Each instructional unit includes some or all of the basic components of a unit of instruction: performance objectives, suggested activities for the teacher, information sheets, job sheets,…

Diesel Mechanics: Fuel Systems.

ERIC Educational Resources Information Center

Foutes, William

This publication is the third in a series of three texts for a diesel mechanics curriculum. Its purpose is to teach the concepts related to fuel injection systems in a diesel trade. The text contains eight units. Each instructional unit includes some or all of these basic components: unit and specific (performance) objectives, suggested activities…

Diesel Mechanics: Electrical Systems.

ERIC Educational Resources Information Center

Foutes, William; And Others

This publication is the second in a series of three texts for a diesel mechanics curriculum. Its purpose is to teach the concepts related to electricity and circuitry in a diesel trade. The text contains nine units. Each instructional unit includes some or all of these basic components: unit and specific (performance) objectives, suggested…

Medical-Surgical I. Teacher Edition.

ERIC Educational Resources Information Center

Oklahoma State Dept. of Vocational and Technical Education, Stillwater. Curriculum and Instructional Materials Center.

This publication is designed to provide students with the knowledge they need to pursue a career in medical-surgical nursing. Eight units are provided. Each instructional unit includes some or all of the basic components of a unit of instruction: performance objectives, suggested activities for the teacher, information sheets, job sheets, written…

Method and Apparatus for Improved Spatial Light Modulation

NASA Technical Reports Server (NTRS)

Soutar, Colin (Inventor); Juday, Richard D. (Inventor)

2000-01-01

A method and apparatus for modulating a light beam in an optical processing system is described. Preferably, an electrically-controlled polarizer unit and/or an analyzer unit are utilized in combination with a spatial light modulator and a controller. Preferably, the spatial light modulator comprises a pixelated birefringent medium such as a liquid crystal video display. The combination of the electrically controlled polarizer unit and analyzer unit make it simple and fast to reconfigure the modulation described by the Jones matrix of the spatial light modulator. A particular optical processing objective is provided to the controller. The controller performs calculations and supplies control signals to the polarizer unit, the analyzer unit, and the spatial light modulator in order to obtain the optical processing objective.

Method and Apparatus for Improved Spatial Light Modulation

NASA Technical Reports Server (NTRS)

Colin, Soutar (Inventor); Juday, Richard D. (Inventor)

1999-01-01

A method and apparatus for modulating a light beam in an optical processing system is described. Preferably, an electrically-controlled polarizer unit and/or an analyzer unit are utilized in combination with a spatial light modulator and a controller. Preferably, the spatial light modulator comprises a pixelated birefringent medium such as a liquid crystal video display. The combination of the electrically controlled polarizer unit and analyzer unit make it simple and fast to reconfigure the modulation described by the Jones matrix of the spatial light modulator. A particular optical processing objective is provided to the controller. The controller performs calculations and supplies control signals to the polarizer unit, the analyzer unit, and the spatial light modulator in order to obtain die optical processing objective.

Health Occupations Education: Medical Assistant.

ERIC Educational Resources Information Center

Sloan, Jamee Reid

These medical assistant instructional materials include 28 instructional units organized into sections covering orientation; anatomy and physiology, related disorders, disease, and skills; office practices; and clinical practices. Each unit includes eight basic components: performance objectives, suggested activities for teachers, information…

L'Afrique. Niveau VI. Base sur le programme scolaire de sciences sociales de Montgomery County Public Schools (Africa. Grade 6. Based on the Social Studies Curriculum of the Montgomery County Public Schools).

ERIC Educational Resources Information Center

Rouhol-Amin, Irandokht

The grade 6 social studies curriculum on Africa for French immersion is outlined. The syllabus consists of seven units. Each contains an instructional objective (in English); a number of specific performance objectives; and for each performance objective, required and optional vocabulary, a list of related activities, and exercises for classroom…

Smart Water Conservation System for Irrigated Landscape. ESTCP Cost and Performance Report

DTIC Science & Technology

2016-10-01

water use by as much as 70% in support of meeting EO 13693. Additional performance objectives were to validate energy reduction, cost effectiveness ...Additional performance objectives were to validate energy reduction, cost effectiveness , and system reliability while maintaining satisfactory plant health...developments. The demonstration was conducted for two different climatic regions in the southwestern part of the United States (U.S.), where a typical

Engine Tune-up Service. Unit 2: Charging System. Review Exercise Book. Automotive Mechanics Curriculum.

ERIC Educational Resources Information Center

Richardson, Roger L.; Bacon, E. Miles

This book of pretests and review exercises is designed to accompany the Engine Tune-Up Service Student Guide for Unit 2, Charging System, available separately as CE 031 208. Focus of the exercises and pretests is testing the charging system. Pretests and performance checklists are provided for each of the three performance objectives contained in…

Introduction to Insulation. Instructor Edition. Introduction to Construction Series.

ERIC Educational Resources Information Center

Oklahoma State Dept. of Vocational and Technical Education, Stillwater. Curriculum and Instructional Materials Center.

This instructor's guide contains the materials required to teach a competency-based introductory course in insulation to students who have chosen to explore careers in construction. It contains three units: instructional unit includes some or all of the basic components of a unit of instruction: performance objectives, suggested activities for the…

Beef Production Unit for Agricultural Science I Core Curriculum. Instructor's Guide. AGDEX 420/10.

ERIC Educational Resources Information Center

Stewart, Bob R.; And Others

This instructor's guide for a beef production unit contains five lessons that are designed to be taught in the Agricultural Science I core curriculum. Introductory materials include lists of performance objectives and competencies for the complete unit, suggestions for motivational technique/interest approach and evaluation, lists of references…

Introduction to Production/Manufacturing Drafting. Drafting Module 8. Instructor's Guide.

ERIC Educational Resources Information Center

Missouri Univ., Columbia. Instructional Materials Lab.

This module, 1 of 10 in the Drafting curriculum guide developed in Missouri, contains 3 units of study that include some or all of the following components: performance objectives, lesson plans, information sheets, transparency masters, handouts, assignment sheets, job sheets, a unit test, and answers to the unit test. Special instructions on…

Advanced Beef Unit for Advanced Livestock Production Curriculum. Instructor's Guide. AGDEX 420/00.

ERIC Educational Resources Information Center

Sparks, Jim; Stewart, Bob R.

This instructor's guide for an advanced beef unit contains 15 lessons that build on Agricultural Science I and II competencies. Introductory materials include lists of performance objectives and competencies for the complete unit, suggestions for motivational technique/interest approach and evaluation, lists of references and materials for the…

Sheep Production Unit for Agricultural Science I Core Curriculum. Instructor's Guide. AGDEX 430/10.

ERIC Educational Resources Information Center

Brzozowski, Richard J.; Stewart, Bob R.

This instructor's guide for a sheep production unit contains six lessons that are designed to be taught in the Agricultural Science I core curriculum. Introductory materials include lists of performance objectives and competencies for the complete unit, suggestions for motivational technique/interest approach and evaluation, lists of references…

Cleaning Services.

ERIC Educational Resources Information Center

Sharpton, James L.

This curriculum guide provides cleaning services instructional materials for a ninth- and tenth-grade Coordinated Vocational Education and Training: Home and Community Services program. It includes 2 sections and 11 instructional units. Each unit of instruction consists of eight basic components: performance objectives, teacher activities,…

Residential Carpentry.

ERIC Educational Resources Information Center

Hendrix, Laborn J.

This curriculum guide provides instructional materials for a course to train carpenters who will make careers in construction. It includes 6 sections and 21 instructional units. Each unit of instruction consists of eight basic components: performance objectives, teacher activities, information sheets (content essential for meeting the cognitive…

Connectionist model-based stereo vision for telerobotics

NASA Technical Reports Server (NTRS)

Hoff, William; Mathis, Donald

1989-01-01

Autonomous stereo vision for range measurement could greatly enhance the performance of telerobotic systems. Stereo vision could be a key component for autonomous object recognition and localization, thus enabling the system to perform low-level tasks, and allowing a human operator to perform a supervisory role. The central difficulty in stereo vision is the ambiguity in matching corresponding points in the left and right images. However, if one has a priori knowledge of the characteristics of the objects in the scene, as is often the case in telerobotics, a model-based approach can be taken. Researchers describe how matching ambiguities can be resolved by ensuring that the resulting three-dimensional points are consistent with surface models of the expected objects. A four-layer neural network hierarchy is used in which surface models of increasing complexity are represented in successive layers. These models are represented using a connectionist scheme called parameter networks, in which a parametrized object (for example, a planar patch p=f(h,m sub x, m sub y) is represented by a collection of processing units, each of which corresponds to a distinct combination of parameter values. The activity level of each unit in the parameter network can be thought of as representing the confidence with which the hypothesis represented by that unit is believed. Weights in the network are set so as to implement gradient descent in an energy function.

Engine Tune-Up Service. Unit 4: Secondary Circuit. Posttests. Automotive Mechanics Curriculum.

ERIC Educational Resources Information Center

Morse, David T.

This book of posttests is designed to accompany the Engine Tune-Up Service Student Guide for Unit 4, Secondary Circuit, available separately as CE 031 214. Focus of the posttests is testing and servicing the secondary ignition circuit. One multiple choice posttest is provided that covers the seven performance objectives contained in the unit. (No…

Engine Tune-Up Service. Unit 3: Primary Circuit. Posttests. Automotive Mechanics Curriculum.

ERIC Educational Resources Information Center

Morse, David T.

This book of posttests is designed to accompany the Engine Tune-Up Service Student Guide for Unit 3, Primary Circuit, available separately as CE 031 211. Focus of the posttests is setting the primary ignition circuit. One multiple choice posttest is provided, covering the eight performance objectives contained in the unit. (No answer key is…

Physical Education Opportunity Program for Exceptional Learners (PEOPEL): A Teacher's Guide for Secondary Schools. Second Edition.

ERIC Educational Resources Information Center

Irmer, Larry D.; And Others

The instructional guide for PEOPEL (Physical Education Opportunity Program for Exceptional Learners) contains 36 units of instruction for use with handicapped junior and senior high school students. The units contain basic performance objectives which have been task analyzed in an effort to individualize instruction. Each unit is divided into four…

Health, safety and environmental unit performance assessment model under uncertainty (case study: steel industry).

PubMed

Shamaii, Azin; Omidvari, Manouchehr; Lotfi, Farhad Hosseinzadeh

2017-01-01

Performance assessment is a critical objective of management systems. As a result of the non-deterministic and qualitative nature of performance indicators, assessments are likely to be influenced by evaluators' personal judgments. Furthermore, in developing countries, performance assessments by the Health, Safety and Environment (HSE) department are based solely on the number of accidents. A questionnaire is used to conduct the study in one of the largest steel production companies in Iran. With respect to health, safety, and environment, the results revealed that control of disease, fire hazards, and air pollution are of paramount importance, with coefficients of 0.057, 0.062, and 0.054, respectively. Furthermore, health and environment indicators were found to be the most common causes of poor performance. Finally, it was shown that HSE management systems can affect the majority of performance safety indicators in the short run, whereas health and environment indicators require longer periods of time. The objective of this study is to present an HSE-MS unit performance assessment model in steel industries. Moreover, we seek to answer the following question: what are the factors that affect HSE unit system in the steel industry? Also, for each factor, the extent of impact on the performance of the HSE management system in the organization is determined.

Basic Facialist. Teacher Edition. Cosmetology Series.

ERIC Educational Resources Information Center

Rogers, Jeanette A.

This Oklahoma curriculum guide contains six units. Each instructional unit includes some or all of these basic components: performance objectives; suggested activities for the teacher; pretest; handouts; information sheets; transparency masters; assignment sheets; job sheets; practical tests; written tests; and answers to pretest, assignment…

Introduction to Agricultural Sales and Service. Teacher Edition.

ERIC Educational Resources Information Center

Kauer, Les

This Oklahoma curriculum guide contains 12 units. Each instructional unit includes some or all of these components: performance objectives, suggested activities, basic academic skills taxonomy, handouts, information sheets, supplements, transparency masters, activity sheets, assignment sheets, assignment sheet answers, job sheets, practical tests,…

South Carolina Guide for Selling.

ERIC Educational Resources Information Center

Elliott, Ronald T.

This curriculum guide provides materials for a secondary course in salesmanship. It contains 6 units that cover 33 competencies. Each competency is presented in a standard format: performance objective, resources, teaching activities, evaluation, and supplementary materials, including an information sheet, exercises, and checklists. Units and…

Result Summary for the Area 5 Radioactive Waste Management Site Performance Assessment Model Version 4.110

DOE Office of Scientific and Technical Information (OSTI.GOV)

NSTec Environmental Management

2011-07-20

Results for Version 4.110 of the Area 5 Radioactive Waste Management Site (RWMS) performance assessment (PA) model are summarized. Version 4.110 includes the fiscal year (FY) 2010 inventory estimate, including a future inventory estimate. Version 4.110 was implemented in GoldSim 10.11(SP4). The following changes have been implemented since the last baseline model, Version 4.105: (1) Updated the inventory and disposal unit configurations with data through the end of FY 2010. (1) Implemented Federal Guidance Report 13 Supplemental CD dose conversion factors (U.S. Environmental Protection Agency, 1999). Version 4.110 PA results comply with air pathway and all-pathways annual total effective dosemore » (TED) performance objectives (Tables 2 and 3, Figures 1 and 2). Air pathways results decrease moderately for all scenarios. The time of the maximum for the air pathway open rangeland scenario shifts from 1,000 to 100 years (y). All-pathways annual TED increases for all scenarios except the resident scenario. The maximum member of public all-pathways dose occurs at 1,000 y for the resident farmer scenario. The resident farmer dose was predominantly due to technetium-99 (Tc-99) (82 percent) and lead-210 (Pb-210) (13 percent). Pb-210 present at 1,000 y is produced predominantly by radioactive decay of uranium-234 (U-234) present at the time of disposal. All results for the postdrilling and intruder-agriculture scenarios comply with the performance objectives (Tables 4 and 5, Figures 3 and 4). The postdrilling intruder results are similar to Version 4.105 results. The intruder-agriculture results are similar to Version 4.105, except for the Pit 6 Radium Disposal Unit (RaDU). The intruder-agriculture result for the Shallow Land Burial (SLB) disposal units is a significant fraction of the performance objective and exceeds the performance objective at the 95th percentile. The intruder-agriculture dose is due predominantly to Tc-99 (75 percent) and U-238 (9.5 percent). The acute intruder scenario results comply with all performance objectives (Tables 6 and 7, Figures 5 and 6). The acute construction result for the SLB disposal units decreases significantly with this version. The maximum acute intruder dose occurs at 1,000 y for the SLB disposal units under the acute construction scenario. The acute intruder dose is caused by multiple radionuclides including U-238 (31 percent), Th-229 (28 percent), plutonium-239 (8.6 percent), U-233 (7.8 percent), and U-234 (6.7 percent). All results for radon-222 (Rn-222) flux density comply with the performance objective (Table 8, Figure 7). The mean Pit 13 RaDU flux density is close to the 0.74 Bq m{sup -2} s{sup -1} limit.« less

The sonar aperture and its neural representation in bats.

PubMed

Heinrich, Melina; Warmbold, Alexander; Hoffmann, Susanne; Firzlaff, Uwe; Wiegrebe, Lutz

2011-10-26

As opposed to visual imaging, biosonar imaging of spatial object properties represents a challenge for the auditory system because its sensory epithelium is not arranged along space axes. For echolocating bats, object width is encoded by the amplitude of its echo (echo intensity) but also by the naturally covarying spread of angles of incidence from which the echoes impinge on the bat's ears (sonar aperture). It is unclear whether bats use the echo intensity and/or the sonar aperture to estimate an object's width. We addressed this question in a combined psychophysical and electrophysiological approach. In three virtual-object playback experiments, bats of the species Phyllostomus discolor had to discriminate simple reflections of their own echolocation calls differing in echo intensity, sonar aperture, or both. Discrimination performance for objects with physically correct covariation of sonar aperture and echo intensity ("object width") did not differ from discrimination performances when only the sonar aperture was varied. Thus, the bats were able to detect changes in object width in the absence of intensity cues. The psychophysical results are reflected in the responses of a population of units in the auditory midbrain and cortex that responded strongest to echoes from objects with a specific sonar aperture, regardless of variations in echo intensity. Neurometric functions obtained from cortical units encoding the sonar aperture are sufficient to explain the behavioral performance of the bats. These current data show that the sonar aperture is a behaviorally relevant and reliably encoded cue for object size in bat sonar.

5 CFR 410.101 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-01-01

... supports agency goals by improving organizational performance at any appropriate level in the agency, as... and performance objectives; (2) Improves an employee's current job performance; (3) Allows for..., United States Code. (i) Established contact hours are the number of academic credit hours assigned to a...

Improving School Bus Driver Performance.

ERIC Educational Resources Information Center

Farmer, Ernest

This reference source is intended to assist the school bus driver training instructor in course preparation. Instructional units for program planning each contain pertinent course questions, a summary, and evaluation questions. Unit 1, "Introduction to the School Bus Driver Training Program," focuses on basic course objectives and…

Automotive Emission Control.

ERIC Educational Resources Information Center

Lee, Billy D.; And Others

This publication contains instructional materials for both teachers and students for a course in automotive emission control. Instructional materials in this publication are written in terms of student performance using measurable objectives. The course includes 16 units. Each instructional unit includes some or all of the basic components of a…

Automotive Emission Control.

ERIC Educational Resources Information Center

Lee, Billy D.; Ragazzi, Ronald

This guide designed to assist teachers in improving instruction in the area of automotive emission control curriculum includes four areas. Each area consists of one or more units of instruction, with each instructional unit including some or all of the following basic components: Performance objectives, suggested activities for teacher and…

A Basic Instructional Unit in Ophthalmology for Medical Students: Conceptualization, Development, Validation and Implementation. Final Report.

ERIC Educational Resources Information Center

Spivey, Bruce E.; And Others

A systems approach has been used to develop and validate instructional materials in medical education. Seven self-instructional units, currently in various stages of completion, form the basis of a basic curriculum in opthamology. Performance objectives for the units were derived from the results of a questionnaire responded to by 1,600…

Engine Tune-up Service. Unit 2: Charging System. Posttests. Automotive Mechanics Curriculum.

ERIC Educational Resources Information Center

Richardson, Roger L.; Bacon, E. Miles

This book of posttests is designed to accompany the Engine Tune-Up Service Student Guide for Unit 2, Charging System, available separately as CE 031 208. Focus of the posttest is on the testing of the charging system. One multiple choice posttest is provided, that covers the three performance objectives contained in the unit. (No answer key is…

Income Tax. Teacher Edition. Farm Business Management Series.

ERIC Educational Resources Information Center

Oklahoma State Dept. of Vocational and Technical Education, Stillwater. Curriculum and Instructional Materials Center.

This curriculum guide for the Oklahoma Farm Business Management Program contains four instructional units that provide students with the necessary knowledge to complete an accurate income tax return. Each unit of instruction includes some or all of these components: performance objectives, suggested activities for the instructor, information…

Practical Nursing. Volume II. Health Occupations Education. Revised.

ERIC Educational Resources Information Center

Rogers, Helen V.; Reid-Sloan, Jamee

This curriculum guide, revised from a 1975 edition, provides teachers with up-to-date information and skill-related applications needed by practical nurses. It includes 4 sections and 24 instructional units. Each unit of instruction consists of eight basic components: performance objectives, teacher activities, information sheets, assignment…

Building Construction. Competency-Based Education Curriculum.

ERIC Educational Resources Information Center

West Virginia State Vocational Curriculum Lab., Cedar Lakes.

Developed and field-tested over a 2-year period by vocational teachers in West Virginia, this competency-based building construction curriculum contains five units of study: Safety, form carpentry, carpentry, masonry, and plumbing. Each unit is subdivided into several competencies, and for each competency taught the performance objectives,…

Snowmobile Repair.

ERIC Educational Resources Information Center

Helbling, Wayne

This guide is designed to provide and/or improve instruction for occupational training in the area of snowmobile repair, and includes eight areas. Each area consists of one or more units of instruction, with each instructional unit including some or all of the following basic components: Performance objectives, suggested activities for teacher and…

Vocational Agriculture I.

ERIC Educational Resources Information Center

Patton, Bob; Harp, Keith

These course materials are designed to provide a foundation of basic knowledge in production agriculture as a prelude to further education in vocational agriculture. The guide contains 6 sections and 22 units of instruction. Each unit includes all or most of eight basic components: performance objectives, suggested activities for the teacher,…

Learn, Grow, Become. TSA Edition.

ERIC Educational Resources Information Center

Oklahoma State Dept. of Vocational and Technical Education, Stillwater. Curriculum and Instructional Materials Center.

This revised curriculum guide contains five units that are designed to help students develop an understanding of the mission of the Technology Student Association (TSA). Each unit follows a standard format that includes some or all of these basic components: performance objectives, suggested activities, handouts, information sheets, supplements,…

Facility Maintenance. V-TECS Guide.

ERIC Educational Resources Information Center

Moore, Charles G.; And Others

This facility maintenance guide is a compilation of duties, tasks, performance objectives, and performance guides that deals with the psychomotor aspect of an occupation. The guide addresses the three domains of learning: psychomotor, cognitive, and affective. Each unit provides job-relevant tasks, standards of performance, source of standard,…

Analysis of the Effects of the Commander’s Battle Positioning on Unit Combat Performance

DTIC Science & Technology

1991-03-01

Analysis ......... .. 58 Logistic Regression Analysis ......... .. 61 Canonical Correlation Analysis ........ .. 62 Descriminant Analysis...entails classifying objects into two or more distinct groups, or responses. Dillon defines descriminant analysis as "deriving linear combinations of the...object given it’s predictor variables. The second objective is, through analysis of the parameters of the descriminant functions, determine those

Highway Maintenance Equipment Operator. Specialized Equipment. Training Materials.

ERIC Educational Resources Information Center

Perky, Sandra Dutreau; And Others

This curriculum guide provides instructional materials to assist in training equipment operators in the safe and effective use of highway maintenance equipment. It includes 18 units of instruction covering the large equipment used in maintenance operations. Each unit of instruction consists of eight basic components: performance objectives,…

Energy: Machines, Science (Experimental): 5311.03.

ERIC Educational Resources Information Center

Castaldi, June P.

This unit of instruction was designed as an introductory course in energy involving six simple machines, electricity, magnetism, and motion. The booklet lists the relevant state-adopted texts and states the performance objectives for the unit. It provides an outline of the course content and suggests experiments, demonstrations, field trips, and…

A Systems Approach to Biology (SAB).

ERIC Educational Resources Information Center

Bush, Kenneth H.; And Others

This pupil's study guide is intended to be used with audio-taped biology modules. Each of the units (on laboratory techniques, plant and animal diversity, chemistry, cells, energy, microbiology, genetics, and development) contains an abstract providing an overview of the unit, the rationale and performance objectives for each module, questions to…

Chain Saw Repair.

ERIC Educational Resources Information Center

Taylor, Mark; Helbling, Wayne

This curriculum is designed to supplement the Comprehensive Small Engine Repair guide by covering in detail all aspects of chain saw repair. The publication contains materials for both teacher and student and is written in terms of student performance using measurable objectives. The course includes six units. Each unit contains some or all of the…

Plumbing and Sewage Disposal.

ERIC Educational Resources Information Center

Sutliff, Ronald D.; And Others

This self-study course is designed to familiarize Marine enlisted personnel with the principles of plumbing and sewage disposal used by Marine Hygiene Equipment Operators to perform their mission. The course contains three study units. Each study unit begins with a general objective, which is a statement of what the student should learn from the…

Geomorphology, Science (Experimental): 5343.09.

ERIC Educational Resources Information Center

Dade County Public Schools, Miami, FL.

Performance objectives are stated for this secondary school instructional unit concerned with aspects of earth science with emphases on the internal and external forces that bring about changes in the earth's crust. Lists of films and state-adopted and other texts are presented. Included are a course outline summarizing the unit content; numerous…

Participation in International Large-Scale Assessments from a US Perspective

ERIC Educational Resources Information Center

Plisko, Valena White

2013-01-01

International large-scale assessments (ILSAs) play a distinct role in the United States' decentralized federal education system. Separate from national and state assessments, they offer an external, objective measure for the United States to assess student performance comparatively with other countries and over time. The US engagement in ILSAs…

Mineralogy, Science (Experimental): 5343.02.

ERIC Educational Resources Information Center

Gato, Jeannette

This unit of instruction deals with the examination of minerals in the earth's crust and their formation into rocks. No prerequisites are required for enrollment in the course. The booklet lists the relevant state-adopted texts and states the performance objectives for the unit. It provides an outline of the course content and suggests…

Authorized Course of Instruction for the Quinmester Program. Science: Man and Nature.

ERIC Educational Resources Information Center

McCarthy, Nancy D.; Silver, Barbara A.

Performance objectives are stated for this secondary school unit prepared for the Dade County Florida Quinmester Program. The unit examines scientific method, biological classification, evolution, population ecology, and pays attention to problems of the human environment. The booklet lists related state-adopted textbooks, cites descriptions of…

Consumer Math 4, Mathematics: 5285.24.

ERIC Educational Resources Information Center

Dade County Public Schools, Miami, FL.

The last of four guidebooks for the General Math student covers installment purchases and small loans, investments, insurance, and cost of housing. Goals and strategies for the course are given; performance objectives for computational skills and for each unit are specified. A course outline, teaching suggestions for each unit, and sample pretests…

[Evaluation of nursing care systematization through the phases of nursing process performance and registration in a teaching hospital].

PubMed

Reppetto, Maria Angela; de Souza, Mariana Fernandes

2005-01-01

This descriptive study was carried out in a teaching hospital at São Paulo city and had as objective to identify the phases performance and registration of nursing care systematization and the most frequent nursing diagnoses. Data were collected retrospectively from 135 patients records of three units: Cardiology, Adult Infectious Diseases and Neurosurgery, from January to July, 2002. The phases: history, nursing diagnoses, prescription, evolution and assessment were performed and registered in the three units, however, it was verified systematization gaps performance related to nursing diagnoses registered without the realization of nursing history and nursing prescriptions without evolution. The most frequent nursing diagnosis in the three units was risk for infection.

Engine Tune-Up Service. Unit 1: Battery and Cranking System. Posttests. Automotive Mechanics Curriculum.

ERIC Educational Resources Information Center

Goodson-Roberts, Ludy; And Others

This book of posttests is designed to accompany the Engine Tune-Up Service Student Guide for Unit 1, Battery and Cranking System. Focus of the posttests is the testing of the battery and cranking system. Four multiple choice posttests are provided, one for each of the performance objectives contained in the unit. (No answer keys are provided.)…

Principles of Technology, Units 1-7. Curriculum Guide.

ERIC Educational Resources Information Center

Campbell, Robert, Comp.

This Idaho secondary education curriculum guide provides lists of tasks, performance objectives, and enabling objectives for instruction intended to impart entry-level employment skills in industrial technology. The first list is a general job competencies task profile, followed by a sheet on which teachers can evaluate students' general job…

Accounting for health-care outcomes: implications for intensive care unit practice and performance.

PubMed

Sorensen, Roslyn; Iedema, Rick

2010-08-01

The aim of this study was to understand the environment of health care, and how clinicians and managers respond in terms of performance accountability. A qualitative method was used in a tertiary metropolitan teaching intensive care unit (ICU) in Sydney, Australia, including interviews with 15 clinical managers and focus groups with 29 nurses of differing experience. The study found that a managerial focus on abstract goals, such as budgets detracted from managing the core business of clinical work. Fractures were evident within clinical units, between clinical units and between clinical and managerial domains. These fractures reinforced the status quo where seemingly unconnected patient care activities were undertaken by loosely connected individual clinicians with personalized concepts of accountability. Managers must conceptualize health services as an interconnected entity within which self-directed teams negotiate and agree objectives, collect and review performance data and define collective practice. Organically developing regimens of care within and across specialist clinical units, such as in ICUs, directly impact upon health service performance and accountability.

Illuminating Everyday Performances of Privilege and Oppression

ERIC Educational Resources Information Center

Heuman, Amy N.

2018-01-01

Courses: Intercultural Communication, Interracial Communication, Gender and Communication, Introduction to Communication Course (within a unit on culture), and any courses encouraging critical analyses of power. Objectives: This activity will: illuminate the ways in which everyday performances of privilege and resulting oppressions connect with…

Welding, V-TECS Guide.

ERIC Educational Resources Information Center

Moore, Charles G.; And Others

This guide provides job-related tasks, performance objectives, performance guides, resources, teaching activities, evaluation standards, and criterion-referenced measures in three units of a welding course. Through the curriculum content of the welding course, the guide helps teachers lead students through the learning process, including the…

Modelling and simulation of a robotic work cell

NASA Astrophysics Data System (ADS)

Sękala, A.; Gwiazda, A.; Kost, G.; Banaś, W.

2017-08-01

The subject of considerations presented in this work concerns the designing and simulation of a robotic work cell. The designing of robotic cells is the process of synergistic combining the components in the group, combining this groups into specific, larger work units or dividing the large work units into small ones. Combinations or divisions are carried out in the terms of the needs of realization the assumed objectives to be performed in these unit. The designing process bases on the integrated approach what lets to take into consideration all needed elements of this process. Each of the elements of a design process could be an independent design agent which could tend to obtain its objectives.

Analysis of Farm Records. Teacher Edition. Farm Business Management Series.

ERIC Educational Resources Information Center

Oklahoma State Dept. of Vocational and Technical Education, Stillwater. Curriculum and Instructional Materials Center.

This curriculum guide for the Oklahoma Farm Business Management Program contains three instructional units that teach students how to interpret farm records to get optimum use of facilities and maximize profits. Each unit of instruction includes some or all of these components: performance objectives, suggested activities for the instructor,…

Language Arts: The Literature of Ecology.

ERIC Educational Resources Information Center

Douglass, Gloria; Annunziata, Joyce

The course guide for a language arts unit within the Dade County Florida Quinmester Program lists performance objectives for the unit designed to give students a clearer understanding of the ecological problems that confront mankind. The viewpoint taken is that of the layman, not the scientist. Selections from state-adopted and other books are…

Fundamentals of Concrete and Cement Masonry. Instructional Materials.

ERIC Educational Resources Information Center

Hendrix, Laborn J.

This curriculum guide provides materials for a course of instruction designed for training concrete masons who will make their careers in construction. It contains 4 sections and 18 instructional units in a standard format. Eight basic components that form a unit of instruction are performance objectives, suggested activities for the teacher,…

Agricultural Biology, Science (Experimental): 5314.09.

ERIC Educational Resources Information Center

Basnett, Fred D.

This unit of instruction was designed as a laboratory study of soils, plants, crop improvements and pesticides, and gives consideration to fish farming, tropical fish, and careers in agriculture. The booklet lists the relevant state-adopted texts and states the performance objectives for the unit. It provides an outline of the course content and…

Automotive Technician. A Competency-Based Curriculum Designed To Prepare Students for Entry-Level Employment.

ERIC Educational Resources Information Center

Vocational Curriculum Resource Center of Maine, Fairfield.

This curriculum guide is designed to assist instructors in the development and implementation of a comprehensive, competency-based automotive curriculum. It contains an instructional unit for each task listed on the enclosed job analysis or DACUM (Developing a Curriculum) chart. These units include introduction, performance objectives, suggested…

Data Acquisition System(DAS) Sustaining Engineering

NASA Technical Reports Server (NTRS)

1998-01-01

This paper presents general information describing the Data Acquisition System contract, a summary of objectives, tasks performed and completed. The hardware deliverables which are comprised of: 1) Two ground DAS units; 2) Two flight DAS units; 3) Logistic spares; and 4) Shipping containers are described. Also included are the data requirements and scope of the contract.

Advanced Respite Care: Medically Challenged. Teacher Edition. Respite Care Series.

ERIC Educational Resources Information Center

Oklahoma State Dept. of Vocational and Technical Education, Stillwater. Curriculum and Instructional Materials Center.

This curriculum guide is designed to help teachers to provide advanced-level training for care providers who want to work with individuals who are chronically or terminally ill and require specialized care. The curriculum contains seven units. Each of the instructional units includes some or all of these basic components: performance objectives,…

Accounting Clerk Guide, Instructor Packet--Part I. A Spec Unit for the 10th, 11th, or 12th Grade. A Career Education Unit (An Edited Developmental Draft).

ERIC Educational Resources Information Center

Foster, Brian; And Others

The instructor packet is part of an eight volume unit for grades 10, 11, and 12, designed for individualized progression in preparing students for entry into the occupation of accounting clerk. The instructor packet lists performance objectives, vocabulary, learning tasks, and supplemental activities for lessons 1 through 11. It also includes…

General test plan redundant sensor strapdown IMU evaluation program

NASA Technical Reports Server (NTRS)

Hartwell, T.; Irwin, H. A.; Miyatake, Y.; Wedekind, D. E.

1971-01-01

The general test plan for a redundant sensor strapdown inertial measuring unit evaluation program is presented. The inertial unit contains six gyros and three orthogonal accelerometers. The software incorporates failure detection and correction logic and a land vehicle navigation program. The principal objective of the test is a demonstration of the practicability, reliability, and performance of the inertial measuring unit with failure detection and correction in operational environments.

[Surface Cleaning and Disinfection in the Hospital. Improvement by Objective Monitoring and Intervention].

PubMed

Woltering, R; Hoffmann, G; Isermann, J; Heudorf, U

2016-11-01

Background and Objective: An assessment of cleaning and disinfection in hospitals by the use of objective surveillance and review of mandatory corrective measures was undertaken. Methods: A prospective examination of the cleaning and disinfection of surfaces scheduled for daily cleaning in 5 general care hospitals by use of an ultraviolet fluorescence targeting method (UVM) was performed, followed by structured educational and procedural interventions. The survey was conducted in hospital wards, operating theatres and intensive care units. Cleaning performance was measured by complete removal of UVM. Training courses and reinforced self-monitoring were implemented after the first evaluation. 6 months later, we repeated the assessment for confirmation of success. Results: The average cleaning performance was 34% (31/90) at base-line with significant differences between the 5 hospitals (11-67%). The best results were achieved in intensive care units (61%) and operating theatres (58%), the worst results in hospital wards (22%). The intervention significantly improved cleaning performance up to an average of 69% (65/94; +34.7%; 95% confidence interval (CI): 21.2-48.3; p<0.05), with differences between the hospitals (20-95%). The largest increase was achieved in hospital wards (+45%; CI 29.2-60.8; p<0.05). Improvements in operating theatres (+22.9%; CI 10.9-56.7) and intensive care units (+5.6%; CI 25.8-36.9) were statistically not significant. Conclusions: The monitoring of cleaning and disinfection of surfaces by fluorescence targeting is appropriate for evaluating hygiene regulations. An intervention can lead to a significant improvement of cleaning performance. As part of a strategy to improve infection control in hospitals, fluorescence targeting enables a simple inexpensive and effective surveillance of the cleaning performance and corrective measures. © Georg Thieme Verlag KG Stuttgart · New York.

Resolving power of diffraction imaging with an objective: a numerical study.

PubMed

Wang, Wenjin; Liu, Jing; Lu, Jun Qing; Ding, Junhua; Hu, Xin-Hua

2017-05-01

Diffraction imaging in the far-field can detect 3D morphological features of an object for its coherent nature. We describe methods for accurate calculation and analysis of diffraction images of scatterers of single and double spheres by an imaging unit based on microscope objective at non-conjugate positions. A quantitative study of the calculated diffraction imaging in spectral domain has been performed to assess the resolving power of diffraction imaging. It has been shown numerically that with coherent illumination of 532 nm in wavelength the imaging unit can resolve single spheres of 2 μm or larger in diameters and double spheres separated by less than 300 nm between their centers.

Processing of chromatic information in a deep convolutional neural network.

PubMed

Flachot, Alban; Gegenfurtner, Karl R

2018-04-01

Deep convolutional neural networks are a class of machine-learning algorithms capable of solving non-trivial tasks, such as object recognition, with human-like performance. Little is known about the exact computations that deep neural networks learn, and to what extent these computations are similar to the ones performed by the primate brain. Here, we investigate how color information is processed in the different layers of the AlexNet deep neural network, originally trained on object classification of over 1.2M images of objects in their natural contexts. We found that the color-responsive units in the first layer of AlexNet learned linear features and were broadly tuned to two directions in color space, analogously to what is known of color responsive cells in the primate thalamus. Moreover, these directions are decorrelated and lead to statistically efficient representations, similar to the cardinal directions of the second-stage color mechanisms in primates. We also found, in analogy to the early stages of the primate visual system, that chromatic and achromatic information were segregated in the early layers of the network. Units in the higher layers of AlexNet exhibit on average a lower responsivity for color than units at earlier stages.

3-d interpolation in object perception: evidence from an objective performance paradigm.

PubMed

Kellman, Philip J; Garrigan, Patrick; Shipley, Thomas F; Yin, Carol; Machado, Liana

2005-06-01

Object perception requires interpolation processes that connect visible regions despite spatial gaps. Some research has suggested that interpolation may be a 3-D process, but objective performance data and evidence about the conditions leading to interpolation are needed. The authors developed an objective performance paradigm for testing 3-D interpolation and tested a new theory of 3-D contour interpolation, termed 3-D relatability. The theory indicates for a given edge which orientations and positions of other edges in space may be connected to it by interpolation. Results of 5 experiments showed that processing of orientation relations in 3-D relatable displays was superior to processing in 3-D nonrelatable displays and that these effects depended on object formation. 3-D interpolation and 3-D relatabilty are discussed in terms of their implications for computational and neural models of object perception, which have typically been based on 2-D-orientation-sensitive units. ((c) 2005 APA, all rights reserved).

Software Techniques for Non-Von Neumann Architectures

DTIC Science & Technology

1990-01-01

Commtopo programmable Benes net.; hypercubic lattice for QCD Control CENTRALIZED Assign STATIC Memory :SHARED Synch UNIVERSAL Max-cpu 566 Proessor...boards (each = 4 floating point units, 2 multipliers) Cpu-size 32-bit floating point chips Perform 11.4 Gflops Market quantum chromodynamics ( QCD ...functions there should exist a capability to define hierarchies and lattices of complex objects. A complex object can be made up of a set of simple objects

Strategy, Operational Art and MacArthur in the Southwest Pacific 1944

DTIC Science & Technology

2016-05-26

Major James N Putnam III United States Marine Corps School of Advanced Military Studies United States Army Command and General Staff College...PROJECT NUMBER 5e. TASK NUMBER 5f. WORK UNIT NUMBER 7. PERFORMING ORGANIZATION NAME(S) AND ADDRESS(ES) School of Advanced Military Studies (SAMS...objective of liberating the Philippines . The study concludes that all the elements of operational art are evident throughout the tactical actions of

1170 MW/sub t/ HTGR steamer cogeneration plant: design and cost study

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

A conceptual design and cost study is presented for intermediate size high temperature gas-cooled reactor (HTGR) for industrial energy applications performed by United Engineers and Constructors Inc., (UE and C) and The General Atomic Company (GAC). The study is part of a program at ORNL and has the objective to provide support in the evaluation of the technical and economic feasibility of a single unit 1170 MW/sub t/ HTGR steam cycle cogeneration plant (referred to as the Steamer plant) for the production of industrial process energy. Inherent in the achievement of this objective, it was essential to perform a numbermore » of basic tasks such as the development of plant concept, capital cost estimate, project schedule and annual operation and maintenance (O and M) cost.« less

Indicator Organisms: Learner's Guide for a Critical Path in Water Quality Monitoring.

ERIC Educational Resources Information Center

Glazer, Richard B.; And Others

This learner's guide on indicator organisms is derived from a water monitoring curriculum developed at Ulster County Community College. There are 37 modules in this guide; each is introduced with a statement of purpose and then broken down into units of instruction. These units contain an objective, learning conditions, and a performance level.…

Energy: Light, Sound, and Heat, Science (Experimental): 5311.04.

ERIC Educational Resources Information Center

Castaldi, June P.

This unit of instruction was designed as a basic course involving the study of light, sound, and heat at the junior high school level. The booklet lists the relevant state-adopted texts and states the performance objectives for the unit. It provides an outline of the course content and suggests experiments, demonstrations, field trips, and topics…

Curriculum Development, Refinement and Testing of Performance Indicators for Selected Vocational Programs. Final Report.

ERIC Educational Resources Information Center

Stella, Carolyn Rose

Curriculum materials are provided for 15 vocational programs. Each course is divided into units, for which a lesson plan is provided. The lesson plans vary slightly by course but generally contain these components: unit title, goal and/or objective, content outline, rationale, procedures, a list of required materials, recommended form of…

Electro-Optic Computing Architectures. Volume I

DTIC Science & Technology

1998-02-01

The objective of the Electro - Optic Computing Architecture (EOCA) program was to develop multi-function electro - optic interfaces and optical...interconnect units to enhance the performance of parallel processor systems and form the building blocks for future electro - optic computing architectures...Specifically, three multi-function interface modules were targeted for development - an Electro - Optic Interface (EOI), an Optical Interconnection Unit (OW

Engine Tune-up Service. Unit 6: Emission Control Systems. Posttests. Automotive Mechanics Curriculum.

ERIC Educational Resources Information Center

Morse, David T.; May, Theodore R.

This book of posttests is designed to accompany the Engine Tune-Up Service Student Guide for Unit 6, Emission Control Systems, available separately as CE 031 220. Focus of the posttests is inspecting, testing, and servicing emission control systems. One multiple choice posttest is provided that covers the seven performance objectives contained in…

The Nervous System, Science (Experimental): 5363.02.

ERIC Educational Resources Information Center

Weiss, Alan; And Others

This unit of instruction was designed as an intensive in-depth study of the nervous impulse, neurons, brain, spinal cord, and sensory organs. Also included is a study of the endocrine system in its role of maintaining homeostasis. The booklet lists the relevant state-adopted texts and states the performance objectives for the unit. It provides an…

Science: Our Solar System, From Atmosphere to Space. Authorized Course of Instruction for the Quinmester Program.

ERIC Educational Resources Information Center

Dade County Public Schools, Miami, FL.

Performance objectives are stated for both of the secondary school units included in this package of instructional guides prepared for the Dade County Florida Quinmester Program. Both units are concerned with astronomy and space: "Our Solar System" and "From Atmosphere to Space." The former deals mainly with astronomy while the…

MTF Database: A Repository of Students' Academic Performance Measurements for the Development of Techniques for Evaluating Team Functioning

ERIC Educational Resources Information Center

Hsiung, Chin-Min; Zheng, Xiang-Xiang

2015-01-01

The Measurements for Team Functioning (MTF) database contains a series of student academic performance measurements obtained at a national university in Taiwan. The measurements are acquired from unit tests and homework tests performed during a core mechanical engineering course, and provide an objective means of assessing the functioning of…

Implementation of a mandatory checklist of protocols and objectives improves compliance with a wide range of evidence-based intensive care unit practices.

PubMed

Byrnes, Matthew C; Schuerer, Douglas J E; Schallom, Marilyn E; Sona, Carrie S; Mazuski, John E; Taylor, Beth E; McKenzie, Wendi; Thomas, James M; Emerson, Jeffrey S; Nemeth, Jennifer L; Bailey, Ruth A; Boyle, Walter A; Buchman, Timothy G; Coopersmith, Craig M

2009-10-01

To determine a) if a checklist covering a diverse group of intensive care unit protocols and objectives would improve clinician consideration of these domains and b) if improved consideration would change practice patterns. Pre- and post observational study. A 24-bed surgical/burn/trauma intensive care unit in a teaching hospital. A total of 1399 patients admitted between June 2006 and May 2007. The first component of the study evaluated whether mandating verbal review of a checklist covering 14 intensive care unit best practices altered verbal consideration of these domains. Evaluation was performed using real-time bedside audits on morning rounds. The second component evaluated whether the checklist altered implementation of these domains by changing practice patterns. Evaluation was performed by analyzing data from the Project IMPACT database after patients left the intensive care unit. Verbal consideration of evaluable domains improved from 90.9% (530/583) to 99.7% (669/671, p < .0001) after verbal review of the checklist was mandated. Bedside consideration improved on the use of deep venous thrombosis prophylaxis (p < .05), stress ulcer prophylaxis (p < .01), oral care for ventilated patients (p < 0.01), electrolyte repletion (p < .01), initiation of physical therapy (p < .05), and documentation of restraint orders (p < .0001). Mandatory verbal review of the checklist resulted in a greater than two-fold increase in transferring patients out of the intensive care unit on telemetry (16% vs. 35%, p < .0001) and initiation of physical therapy (28% vs. 42%, p < .0001) compared with baseline practice. A mandatory verbal review of a checklist covering a wide range of objectives and goals at each patient's bedside is an effective method to improve both consideration and implementation of intensive care unit best practices. A bedside checklist is a simple, cost-effective method to prevent errors of omission in basic domains of intensive care unit management that might otherwise be forgotten in the setting of more urgent care requirements.

[Nursing care time in a teaching hospital].

PubMed

Rogenski, Karin Emília; Fugulin, Fernanda Maria Togeiro; Gaidzinski, Raquel Rapone; Rogenski, Noemi Marisa Brunet

2011-03-01

This is a quantitative exploratory, descriptive study performed with the objective to identify and analyze the performance of the average time of nursing care delivered to patients of the Inpatient Units of the University Hospital at University of São Paulo (UH-USP), from 2001 to 2005. The average nursing care time delivered to patients of the referred units was identified by applying of a mathematical equation proposed in the literature, after surveying data from the Medical and Statistical Service and based on the monthly working shifts of the nursing professionals. Data analysis was performed using descriptive statistics. The average nursing care time observed in most units, despite some variations, remained stable during the analyzed period. Based on this observed stability, it is concluded that the nursing staff in the referred HU-USP units has been continuously evaluated with the purposes of maintaining the average time of assistance and, thus, the quality of the care being delivered.

Downsizing?-?Intellectual Capital Performance Anorexia or Enhancement?

ERIC Educational Resources Information Center

Williams, S. Mitchell

2004-01-01

The objective of this paper is to investigate if downsizing contributes to, or impedes, a firm's intellectual capital performance (ICE) based on a longitudinal analysis of 56 United States publicly listed companies that significantly downsized their workforce during the mid-1990s. Empirical analysis indicates that for the majority of firms, ICE…

South Carolina Guide for Consumer Education I & II.

ERIC Educational Resources Information Center

South Carolina State Dept. of Education, Columbia. Office of Occupational Education.

This guide is designed to provide job-relevant tasks, performance objectives, performance guides, resources, teaching activities, and instructional resources for teaching consumer education I and II in South Carolina. It may be used with any teaching method selected by the instructor. Consumer Education I contains four units: demonstrate…

A Comparative Study of Performance in the Conners' Continuous Performance Test between Brazilian and North American Children

ERIC Educational Resources Information Center

Miranda, Monica Carolina; Sinnes, Elaine Girao; Pompeia, Sabine; Bueno, Orlando Francisco Amodeo

2008-01-01

Objective: The present study investigated the performance of Brazilian children in the Continuous Performance Test, CPT-II, and compared results to those of the norms obtained in the United States. Method: The U.S. norms were compared to those of a Brazilian sample composed of 6- to 11-year-olds separated into 4 age-groups (half boys) that…

Articulated, Performance-Based Instruction Objectives Guide for Air Conditioning, Refrigeration, and Heating. Volume II (Second Year).

ERIC Educational Resources Information Center

Henderson, William Edward, Jr., Ed.

This articulation guide contains 17 units of instruction for the second year of a two-year vocational program designed to prepare the high school graduate to install, maintain, and repair various types of residential and commercial heating, air conditioning, and refrigeration equipment. The units are designed to help the student to expand and…

Articulated, Performance-Based Instruction Objectives Guide for Air Conditioning, Refrigeration, and Heating (Environmental Control System Installer/Servicer). Edition I.

ERIC Educational Resources Information Center

Henderson, William Edward, Jr., Ed.

This articulation guide contains 17 units of instruction for the first year of a two-year vocational program designed to prepare the high school graduate to install, maintain, and repair various types of residential and commercial heating, air conditioning, and refrigeration equipment. The units are to introduce the student to fundamental theories…

Commerce Supervisory Course: Discussion Guide. Guidelines, Objectives.

ERIC Educational Resources Information Center

McDonald, Miller; And Others

Guidelines for the complete Commerce Supervisory Course are presented. The four unit headings in this guide are: Introductory to Supervision, Personnel Management for Supervisors, Individual and Group Performance, and Supervisory Operational Activities. (NF)

A Big Apple for Educators: New York City's Experiment with Schoolwide Performance Bonuses. Final Evaluation Report. Monograph

ERIC Educational Resources Information Center

Marsh, Julie A.; Springer, Matthew G.; McCaffrey, Daniel F.; Yuan, Kun; Epstein, Scott; Koppich, Julia; Kalra, Nidhi; DiMartino, Catherine; Peng, Art

2011-01-01

In the 2007-2008 school year, the New York City Department of Education and the United Federation of Teachers jointly implemented the Schoolwide Performance Bonus Program in a random sample of the city's high-needs public schools. The program lasted for three school years, and its broad objective was to improve student performance through…

ExoMars Raman Laser Spectrometer scientific required performances check with a Breadboard

NASA Astrophysics Data System (ADS)

Moral, A.; Díaz, E.; Ramos, G.; Rodríguez Prieto, J. A.; Pérez Canora, C.; Díaz, C.; Canchal, R.; Gallego, P.; Santamaría, P.; Colombo, M.

2013-09-01

The Raman Laser Spectrometer (RLS) is one of the Pasteur Payload instruments, within the ESA's Aurora Exploration Program, ExoMars mission. For being able to verify the achievement of the scientific objectives of the instrument, a Breadboard campaign was developed, for achieving instrument TRL5. Within the Instrument TRL5 Plan, it was required to every unit to develop its own Unit Breadboard, to check their own TRL5 and then to deliver it to System Team to be integrated and tested for finally checks Instrument performances.

An Approach to Object Recognition: Aligning Pictorial Descriptions.

DTIC Science & Technology

1986-12-01

PERFORMING 0RGANIZATION NAMIE ANDORS IS551. PROGRAM ELEMENT. PROJECT. TASK Artificial Inteligence Laboratory AREKA A WORK UNIT NUMBERS ( 545 Technology... ARTIFICIAL INTELLIGENCE LABORATORY A.I. Memo No. 931 December, 1986 AN APPROACH TO OBJECT RECOGNITION: ALIGNING PICTORIAL DESCRIPTIONS Shimon Ullman...within the Artificial Intelligence Laboratory at the Massachusetts Institute of Technology. Support for the A.I. Laboratory’s artificial intelligence

Articulated, Performance-Based Instruction Objectives Guide for Machine Shop Technology.

ERIC Educational Resources Information Center

Henderson, William Edward, Jr., Ed.

This articulation guide contains 21 units of instruction for two years of machine shop. The objectives of the program are to provide the student with the basic terminology and fundamental knowledge and skills in machining (year 1) and to teach him/her to set up and operate machine tools and make or repair metal parts, tools, and machines (year 2).…

Error reduction by combining strapdown inertial measurement units in a baseball stitch

NASA Astrophysics Data System (ADS)

Tracy, Leah

A poor musical performance is rarely due to an inferior instrument. When a device is under performing, the temptation is to find a better device or a new technology to achieve performance objectives; however, another solution may be improving how existing technology is used through a better understanding of device characteristics, i.e., learning to play the instrument better. This thesis explores improving position and attitude estimates of inertial navigation systems (INS) through an understanding of inertial sensor errors, manipulating inertial measurement units (IMUs) to reduce that error and multisensor fusion of multiple IMUs to reduce error in a GPS denied environment.

Practical system for generating digital mixed reality video holograms.

PubMed

Song, Joongseok; Kim, Changseob; Park, Hanhoon; Park, Jong-Il

2016-07-10

We propose a practical system that can effectively mix the depth data of real and virtual objects by using a Z buffer and can quickly generate digital mixed reality video holograms by using multiple graphic processing units (GPUs). In an experiment, we verify that real objects and virtual objects can be merged naturally in free viewing angles, and the occlusion problem is well handled. Furthermore, we demonstrate that the proposed system can generate mixed reality video holograms at 7.6 frames per second. Finally, the system performance is objectively verified by users' subjective evaluations.

Arsenic Removal from Drinking Water by Coagulation/Filtration - U.S. EPA Demonstration Project at Town of Arnaudville, LA - Final Performance Evaluation Report

EPA Science Inventory

This report documents the activities performed during and the results obtained from the arsenic removal treatment technology demonstration project at the United Water Systems’ facility in Arnaudville, LA. The objectives of the project were to evaluate: (1) the effectiveness of K...

Cross-cultural Study of Understanding of Scale and Measurement: Does the everyday use of US customary units disadvantage US students?

NASA Astrophysics Data System (ADS)

Delgado, Cesar

2013-06-01

Following a sociocultural perspective, this study investigates how students who have grown up using the SI (Système International d'Unités) (metric) or US customary (USC) systems of units for everyday use differ in their knowledge of scale and measurement. Student groups were similar in terms of socioeconomic status, curriculum, native language transparency of number word structure, type of school, and makeup by gender and grade level, while varying by native system of measurement. Their performance on several tasks was compared using binary logistic regression, ordinal logistic regression, and analysis of variance, with gender and grade level as covariates. Participants included 17 USC-native and 89 SI-native students in a school in Mexico, and 31 USC-native students in a school in the Midwestern USA. SI-native students performed at a significantly higher level estimating the length of a metre and a conceptual task (coordinating relative size and absolute size). No statistically significant differences were found on tasks involving factual knowledge about objects or units, scale construction, or estimation of other units. USC-native students in the US school performed at a higher level on smallest known object. These findings suggest that the more transparent SI system better supports conceptual thinking about scale and measurement than the idiosyncratic USC system. Greater emphasis on the SI system and more complete adoption of the SI system for everyday life may improve understanding among US students. Advancing sociocultural theory, systems of units were found to mediate learner's understanding of scale and measurement, much as number words mediate counting and problem solving.

Afro-Caribbean and African American Students, Family Factors, and the Influence on Science Performance in the United States: The Untold Story

ERIC Educational Resources Information Center

Pinder, Patrice Juliet

2012-01-01

The primary objectives of this research were to explore achievement pattern differences and the influence of family factors on the achievement patterns of Afro-Caribbean and African American students within the United States (U.S.). The study utilized two research designs; a causal-comparative and a correlational design. A student family…

La Materia. Nivel II. Basado en el curso de estudios de Ciencia de Montgomery County Public Schools. (Matter. Level II. Based on the Montgomery County Public Schools Science Studies Program).

ERIC Educational Resources Information Center

Gerstman, M. Linda

This curriculum unit is for use in an elementary school foreign language immersion program in Montgomery County, Maryland. The unit is geared toward the second grade science classroom. It includes instructional and performance objectives, vocabulary lists, optional language structure sections, illustrations, activities, evaluation suggestions, and…

Electro-Optic Computing Architectures: Volume II. Components and System Design and Analysis

DTIC Science & Technology

1998-02-01

The objective of the Electro - Optic Computing Architecture (EOCA) program was to develop multi-function electro - optic interfaces and optical...interconnect units to enhance the performance of parallel processor systems and form the building blocks for future electro - optic computing architectures...Specifically, three multi-function interface modules were targeted for development - an Electro - Optic Interface (EOI), an Optical Interconnection Unit

Authorized Course of Instruction for the Quinmester Program. Science: Scientific Approach to Solving Problems; Who's Who; and What in the World's Going On.

ERIC Educational Resources Information Center

Dade County Public Schools, Miami, FL.

Performance objectives are stated for each of the three secondary school units included in this package prepared for the Dade County Florida Quinmester Program. The units all concern some aspect of instruction in scientific method. "The Scientific Approach to Solving Problems" introduces students to the use of experimental testing of…

Multi-objective Optimization of a Solar Humidification Dehumidification Desalination Unit

NASA Astrophysics Data System (ADS)

Rafigh, M.; Mirzaeian, M.; Najafi, B.; Rinaldi, F.; Marchesi, R.

2017-11-01

In the present paper, a humidification-dehumidification desalination unit integrated with solar system is considered. In the first step mathematical model of the whole plant is represented. Next, taking into account the logical constraints, the performance of the system is optimized. On one hand it is desired to have higher energetic efficiency, while on the other hand, higher efficiency results in an increment in the required area for each subsystem which consequently leads to an increase in the total cost of the plant. In the present work, the optimum solution is achieved when the specific energy of the solar heater and also the areas of humidifier and dehumidifier are minimized. Due to the fact that considered objective functions are in conflict, conventional optimization methods are not applicable. Hence, multi objective optimization using genetic algorithm which is an efficient tool for dealing with problems with conflicting objectives has been utilized and a set of optimal solutions called Pareto front each of which is a tradeoff between the mentioned objectives is generated.

Application of the Activity-Based Costing Method for Unit-Cost Calculation in a Hospital

PubMed Central

Javid, Mahdi; Hadian, Mohammad; Ghaderi, Hossein; Ghaffari, Shahram; Salehi, Masoud

2016-01-01

Background: Choosing an appropriate accounting system for hospital has always been a challenge for hospital managers. Traditional cost system (TCS) causes cost distortions in hospital. Activity-based costing (ABC) method is a new and more effective cost system. Objective: This study aimed to compare ABC with TCS method in calculating the unit cost of medical services and to assess its applicability in Kashani Hospital, Shahrekord City, Iran. Methods: This cross-sectional study was performed on accounting data of Kashani Hospital in 2013. Data on accounting reports of 2012 and other relevant sources at the end of 2012 were included. To apply ABC method, the hospital was divided into several cost centers and five cost categories were defined: wage, equipment, space, material, and overhead costs. Then activity centers were defined. ABC method was performed into two phases. First, the total costs of cost centers were assigned to activities by using related cost factors. Then the costs of activities were divided to cost objects by using cost drivers. After determining the cost of objects, the cost price of medical services was calculated and compared with those obtained from TCS. Results: The Kashani Hospital had 81 physicians, 306 nurses, and 328 beds with the mean occupancy rate of 67.4% during 2012. Unit cost of medical services, cost price of occupancy bed per day, and cost per outpatient service were calculated. The total unit costs by ABC and TCS were respectively 187.95 and 137.70 USD, showing 50.34 USD more unit cost by ABC method. ABC method represented more accurate information on the major cost components. Conclusion: By utilizing ABC, hospital managers have a valuable accounting system that provides a true insight into the organizational costs of their department. PMID:26234974

University Leaders and University Performance in the United Kingdom: Is It "Who" Leads, or "Where" They Lead that Matters Most?

ERIC Educational Resources Information Center

Breakwell, Glynis M.; Tytherleigh, Michelle Y.

2010-01-01

With key performance indicators (KPIs) part of everyday life in the higher education (HE) sector, universities have become increasingly concerned with league tables and performance indicator-led strategy and planning. The choice an institution makes concerning the KPIs it wishes to be evaluated on depends on its mission and objectives, with a Head…

An Object-Independent ENZ Metamaterial-Based Wideband Electromagnetic Cloak

PubMed Central

Islam, Sikder Sunbeam; Faruque, Mohammad Rashed Iqbal; Islam, Mohammad Tariqul

2016-01-01

A new, metamaterial-based electromagnetic cloaking operation is proposed in this study. The metamaterial exhibits a sharp transmittance in the C-band of the microwave spectrum with negative effective property of permittivity at that frequency. Two metal arms were placed on an FR-4 substrate to construct a double-split-square shape structure. The size of the resonator was maintained to achieve the effective medium property of the metamaterial. Full wave numerical simulation was performed to extract the reflection and transmission coefficients for the unit cell. Later on, a single layer square-shaped cloak was designed using the proposed metamaterial unit cell. The cloak hides a metal cylinder electromagnetically, where the material exhibits epsilon-near-zero (ENZ) property. Cloaking operation was demonstrated adopting the scattering-reduction technique. The measured result was provided to validate the characteristics of the metamaterial and the cloak. Some object size- and shape-based analyses were performed with the cloak, and a common cloaking region was revealed over more than 900 MHz in the C-band for the different objects. PMID:27634456

An Object-Independent ENZ Metamaterial-Based Wideband Electromagnetic Cloak.

PubMed

Islam, Sikder Sunbeam; Faruque, Mohammad Rashed Iqbal; Islam, Mohammad Tariqul

2016-09-16

A new, metamaterial-based electromagnetic cloaking operation is proposed in this study. The metamaterial exhibits a sharp transmittance in the C-band of the microwave spectrum with negative effective property of permittivity at that frequency. Two metal arms were placed on an FR-4 substrate to construct a double-split-square shape structure. The size of the resonator was maintained to achieve the effective medium property of the metamaterial. Full wave numerical simulation was performed to extract the reflection and transmission coefficients for the unit cell. Later on, a single layer square-shaped cloak was designed using the proposed metamaterial unit cell. The cloak hides a metal cylinder electromagnetically, where the material exhibits epsilon-near-zero (ENZ) property. Cloaking operation was demonstrated adopting the scattering-reduction technique. The measured result was provided to validate the characteristics of the metamaterial and the cloak. Some object size- and shape-based analyses were performed with the cloak, and a common cloaking region was revealed over more than 900 MHz in the C-band for the different objects.

Separating the Signal from the Noise: An Examination of Student and Teacher Scores Based on Student Learning Objectives (SLOs) in One State

ERIC Educational Resources Information Center

Buckley, Katie Hills

2015-01-01

Despite the prevalence of student learning objectives (SLOs) in teacher evaluation systems throughout the United States, research on the validity of student and teacher SLO scores used for high-stakes decisions is lacking. For this reason, this dissertation is comprised of two chapters that examine student and teacher-level SLO performance data…

Compilation of Steady State Automotive Engine Test Data

DOT National Transportation Integrated Search

1978-09-01

Experimental data were obtained in dynamometer tests of automotive engines used in the United States. The objective of this program is to obtain engine performance data for determining fuel consumption and emissions (carbon monoxide, hydrocarbons, an...

Articulated, Performance-Based Instruction Objectives Guide for Masonry (Bricklaying). Developing Period, July, 1983--June, 1984. Edition I.

ERIC Educational Resources Information Center

Henderson, Wm. Edward, Jr., Ed.

This curriculum guide is designed to assist vocational educators in presenting an articulated, performance-based course in masonry and bricklaying. Addressed in the individual units of the course are the following topics: safety, leadership, job communications, career preparation, desirable learning and work habits and attitudes, basic math…

Articulated, Performance-Based Instruction Objectives Guide for Electricity/Industrial Electricity. Development Period, July, 1983--June, 1984. Edition I.

ERIC Educational Resources Information Center

Henderson, Wm. Edward, Jr., Ed.

This curriculum guide is designed to assist vocational educators in presenting an articulated, performance-based course in electricity and industrial electricity. Addressed in the individual units of the course (included in 11 modules) are the following topics: safety, leadership, communication skills, career preparation, good work habits and…

Authorized Course of Instruction for the Quinmester Program. Science: Introduction to Anatomy and Physiology; Human Reproduction; Man and Disease; Man's Senses; and Introduction to the Human Body.

ERIC Educational Resources Information Center

Dade County Public Schools, Miami, FL.

Performance objectives are stated for each of the five secondary school units included in this package of instructional guides prepared for the Dade County Florida Quinmester Program. All five units are concerned with aspects of physiology; three require no prerequisite study of biology ("Introduction to the Human Body,""Man and…

Seres Vivos. Nivel I. Basado en el curso de estudios de Ciencia de Montgomery County Public Schools. (Living Beings. Level 1. Based on the Montgomery County Public Schools Science Studies Program).

ERIC Educational Resources Information Center

Senger, Graciela

This curriculum unit, developed by the Montgomery County Public Schools, Maryland, was designed for use in the elementary level foreign language immersion program. It is geared toward the first grade science classroom. The unit includes instructional and performance objectives, necessary vocabulary lists, optional language structure sections,…

Meteorite Unit Models for Structural Properties

NASA Astrophysics Data System (ADS)

Agrawal, Parul; Carlozzi, Alexander A.; Karajeh, Zaid S.; Bryson, Kathryn L.

2017-10-01

To assess the threat posed by an asteroid entering Earth’s atmosphere, one must predict if, when, and how it fragments during entry. A comprehensive understanding of the asteroid material properties is needed to achieve this objective. At present, the meteorite material found on earth are the only objects from an entering asteroid that can be used as representative material and be tested inside a laboratory. Due to complex composition, it is challenging and expensive to obtain reliable material properties by means of laboratory test for a family of meteorites. In order to circumvent this challenge, meteorite unit models are developed to determine the effective material properties including Young’s modulus, compressive and tensile strengths and Poisson’s ratio, that in turn would help deduce the properties of asteroids. The meteorite unit model is a representative volume that accounts for diverse minerals, porosity, cracks and matrix composition.The Young’s Modulus and Poisson’s Ratio in the meteorite units are calculated by performing several hundreds of Monte Carlo simulations by randomly distributing the various phases inside these units. Once these values are obtained, cracks are introduced in these units. The size, orientation and distribution of cracks are derived by CT-scans and visual scans of various meteorites. Subsequently, simulations are performed to attain stress-strain relations, strength and effective modulus values in the presence of these cracks. The meteorite unit models are presented for H, L and LL ordinary chondrites, as well as for terrestrial basalt. In the case of the latter, data from the simulations is compared with experimental data to validate the methodology. These meteorite unit models will be subsequently used in fragmentation modeling of full scale asteroids.

Numerical Study on Natural Vacuum Solar Desalination System with Varying Heat Source Temperature

NASA Astrophysics Data System (ADS)

Ambarita, H.

2017-03-01

A natural vacuum desalination unit with varying low grade heat source temperature is investigated numerically. The objective is to explore the effects of the variable temperature of the low grade heat source on performances and characteristics of the desalination unit. The specifications of the desalination unit are naturally vacuumed with surface area of seawater in evaporator and heating coil are 0.2 m2 and 0.188 m2, respectively. Temperature of the heating coil is simulated based on the solar radiation in the Medan city. A program to solve the governing equations in forward time step marching technique is developed. Temperature of the evaporator, fresh water production rate, and thermal efficiency of the desalination unit are analysed. Simulation is performed for 9 hours, it starts from 8.00 and finishes at 17.00 of local time. The results show that, the desalination unit with operation time of 9 hours can produce 5.705 L of freshwater and thermal efficiency is 81.8 %. This reveals that varying temperature of the heat source of natural vacuum desalination unit shows better performance in comparison with constant temperature of the heat source.

Modified-hybrid optical neural network filter for multiple object recognition within cluttered scenes

NASA Astrophysics Data System (ADS)

Kypraios, Ioannis; Young, Rupert C. D.; Chatwin, Chris R.

2009-08-01

Motivated by the non-linear interpolation and generalization abilities of the hybrid optical neural network filter between the reference and non-reference images of the true-class object we designed the modifiedhybrid optical neural network filter. We applied an optical mask to the hybrid optical neural network's filter input. The mask was built with the constant weight connections of a randomly chosen image included in the training set. The resulted design of the modified-hybrid optical neural network filter is optimized for performing best in cluttered scenes of the true-class object. Due to the shift invariance properties inherited by its correlator unit the filter can accommodate multiple objects of the same class to be detected within an input cluttered image. Additionally, the architecture of the neural network unit of the general hybrid optical neural network filter allows the recognition of multiple objects of different classes within the input cluttered image by modifying the output layer of the unit. We test the modified-hybrid optical neural network filter for multiple objects of the same and of different classes' recognition within cluttered input images and video sequences of cluttered scenes. The filter is shown to exhibit with a single pass over the input data simultaneously out-of-plane rotation, shift invariance and good clutter tolerance. It is able to successfully detect and classify correctly the true-class objects within background clutter for which there has been no previous training.

The Design and Implementation of an Object-Oriented, Production-Rule Interpreter.

DTIC Science & Technology

1984-12-01

S. CONTRACT OR GRANT NUMBER(s) .Heinz M. McArthur 9. PERFORMING ORGANIZATION NAME AND ADDRESS 10. PROGRAM ELEMENT. PROJECT. TASK AREA & WORK UNIT...implementation of two prototype interpreters for Omega, an object-oriented, production- rule programming language. The first implementation is a throw- away...production-rule programming language. The first implementa- tion is a throw-away prototype written in LISP; the second implementation is a more complete

Verification of Spatial Forecasts of Continuous Meteorological Variables Using Categorical and Object-Based Methods

DTIC Science & Technology

2016-08-01

Using Categorical and Object-Based Methods by John W Raby and Huaqing Cai Approved for public release; distribution...by John W Raby and Huaqing Cai Computational and Information Sciences Directorate, ARL Approved for public release...AUTHOR(S) John W Raby and Huaqing Cai 5d. PROJECT NUMBER 5e. TASK NUMBER 5f. WORK UNIT NUMBER 7. PERFORMING ORGANIZATION NAME(S) AND

Investigation of Effective Material Properties of Stony Meteorites

NASA Technical Reports Server (NTRS)

Agrawal, Parul; Carlozzi, Alex; Bryson, Kathryn

2016-01-01

To assess the threat posed by an asteroid entering Earth's atmosphere, one must predict if, when, and how it fragments during entry. A comprehensive understanding of the Asteroid material properties is needed to achieve this objective. At present, the meteorite material found on Earth are the only objects from an entering asteroid that can be used as representative material and be tested inside a laboratory setting. Therefore, unit cell models are developed to determine the effective material properties of stony meteorites and in turn deduce the properties of asteroids. The unit cell is representative volume that accounts for diverse minerals, porosity, and matrix composition inside a meteorite. The various classes under investigation includes H-class, L-class, and LL-class chondrites. The effective mechanical properties such as Young's Modulus and Poisson's Ratio of the unit cell are calculated by performing several hundreds of Monte-Carlo simulations. Terrestrial analogs such as Basalt and Gabbro are being used to validate the unit cell methodology.

Design and development of FZU-32/B bomb fuze initiator. Final report 23 Jun 72--15 Nov 73

DOE Office of Scientific and Technical Information (OSTI.GOV)

Miazza, J.

1974-05-01

The primary objective of this program was to develop a cost effective, production engineered FZU-24/B Bomb Fuze Initiator. The initiator is an electric generating device which, when installed in the fuze charging well of general purpose bombs, is capable of deriving energy from the airstream passing the bomb in free fall and converting the energy into electric energy suitable for powering a bomb fuze. The objective was to be accomplished by means of a production engineering effort carried through the evolution of design, fabrication, assembly, test, and evaluation. The baseline for the design was Harry Diamond Laboratories' Drawing No. 11716160.more » A quantity of 60 units was fabricated and tested, in accordance with the production engineered design. After some additional redesign to correct identified deficiencies, 220 units were fabricated. These units were subjected to environmental, wind tunnel, and flight testing and performance requirements were met. The final unit design was designated the FZU-32/B Bomb Fuze Initiator.« less

Graphics Processing Unit Assisted Thermographic Compositing

NASA Technical Reports Server (NTRS)

Ragasa, Scott; Russell, Samuel S.

2012-01-01

Objective Develop a software application utilizing high performance computing techniques, including general purpose graphics processing units (GPGPUs), for the analysis and visualization of large thermographic data sets. Over the past several years, an increasing effort among scientists and engineers to utilize graphics processing units (GPUs) in a more general purpose fashion is allowing for previously unobtainable levels of computation by individual workstations. As data sets grow, the methods to work them grow at an equal, and often greater, pace. Certain common computations can take advantage of the massively parallel and optimized hardware constructs of the GPU which yield significant increases in performance. These common computations have high degrees of data parallelism, that is, they are the same computation applied to a large set of data where the result does not depend on other data elements. Image processing is one area were GPUs are being used to greatly increase the performance of certain analysis and visualization techniques.

A new contribution to the classification of stressors affecting nursing professionals

PubMed Central

Puerto, Jesús Cremades; Soler, Loreto Maciá; Montesinos, Maria José López; Marcos, Azucena Pedraz; Chorda, Víctor Manuel González

2017-01-01

Objective: to identify and classify the most important occupational stressors affecting nursing professionals in the medical units within a hospital. Method: quantitative-qualitative, descriptive and prospective study performed with Delphi technique in the medical units of a general university hospital, with a sample of 30 nursing professionals. Results: the stressors were work overload, frequent interruptions in the accomplishment of their tasks, night working, simultaneity of performing different tasks, not having enough time to give emotional support to the patient or lack of time for some patients who need it, among others. Conclusion: the most consensual stressors were ranked as work overload, frequent interruptions in the accomplishment of their tasks, night working and, finally, simultaneity of performing different tasks. These results can be used as a tool in the clinical management of hospital units, aiming to improve the quality of life of nursing professionals, organizational models and, in addition, continuous improvement in clinical treatment. PMID:28562702

Working Memory Units are All in Your Head: Factors that Influence Whether Features or Objects Are the Favored Units

PubMed Central

Vergauwe, Evie; Cowan, Nelson

2015-01-01

We compared two contrasting hypotheses of how multi-featured objects are stored in visual working memory (vWM): as integrated objects or as independent features. A new procedure was devised to examine vWM representations of several concurrently-held objects and their features and our main measure was reaction time (RT), allowing an examination of the real-time search through features and/or objects in an array in vWM. Response speeds to probes with color, shape or both were studied as a function of the number of memorized colored shapes. Four testing groups were created by varying the instructions and the way in which probes with both color and shape were presented. The instructions explicitly either encouraged or discouraged the use of binding information and the task-relevance of binding information was further suggested by presenting probes with both color and shapes as either integrated objects or independent features. Our results show that the unit used for retrieval from vWM depends on the testing situation. Search was fully object-based only when all factors support that basis of search, in which case retrieving two features took no longer than retrieving a single feature. Otherwise, retrieving two features took longer than retrieving a single feature. Additional analyses of change detection latency suggested that, even though different testing situations can result in a stronger emphasis on either the feature dimension or the object dimension, neither one disappears from the representation and both concurrently affect change detection performance. PMID:25705873

Working memory units are all in your head: Factors that influence whether features or objects are the favored units.

PubMed

Vergauwe, Evie; Cowan, Nelson

2015-09-01

We compared two contrasting hypotheses of how multifeatured objects are stored in visual working memory (vWM); as integrated objects or as independent features. A new procedure was devised to examine vWM representations of several concurrently held objects and their features and our main measure was reaction time (RT), allowing an examination of the real-time search through features and/or objects in an array in vWM. Response speeds to probes with color, shape, or both were studied as a function of the number of memorized colored shapes. Four testing groups were created by varying the instructions and the way in which probes with both color and shape were presented. The instructions explicitly either encouraged or discouraged the use of binding information and the task-relevance of binding information was further suggested by presenting probes with both color and shapes as either integrated objects or independent features. Our results show that the unit used for retrieval from vWM depends on the testing situation. Search was fully object-based only when all factors support that basis of search, in which case retrieving 2 features took no longer than retrieving a single feature. Otherwise, retrieving 2 features took longer than retrieving a single feature. Additional analyses of change detection latency suggested that, even though different testing situations can result in a stronger emphasis on either the feature dimension or the object dimension, neither one disappears from the representation and both concurrently affect change detection performance. (c) 2015 APA, all rights reserved).

Design and performance verification of UHPC piles for deep foundations.

DOT National Transportation Integrated Search

2008-11-01

The strategic plan for bridge engineering issued by AASHTO in 2005 identified extending the service life and optimizing structural : systems of bridges in the United States as two grand challenges in bridge engineering, with the objective of producin...

Developing a Predictive Capability for Bioluminescence Signatures

DTIC Science & Technology

2012-09-30

dinoflagellates, common unicellular plankton that are also known to form red tides. Dinoflagellate bioluminescence is stimulated by flow stress of...bioluminescence signature of a moving object depends on the bioluminescence potential of the organisms (related to their species abundance), the...WORK UNIT NUMBER 7. PERFORMING ORGANIZATION NAME(S) AND ADDRESS(ES) Naval Surface Warfare Center Panama City, FL 32407 8. PERFORMING ORGANIZATION

Articulated, Performance-Based Instruction Objectives Guide for Auto Body Repair. Development Period, July, 1983--June, 1984. Edition I.

ERIC Educational Resources Information Center

Henderson, Wm. Edward, Jr., Ed.

This curriculum guide is designed to assist vocational educators in presenting an articulated, performance-based course in auto body repair. Addressed in the individual units of the course (included in 14 modules) are the following topics: safety; leadership and job communication; career preparation; shielded metal arc welding; gas metal arc…

Qualification of an Acceptable Alternative to Halon 1211 DOD Flightline Extinguishers

DTIC Science & Technology

2008-09-01

Minimum Performance Standard MSDS Material Safety Data Sheet NATO North Atlantic Treaty Organization NAWCAD Naval Air Warfare Center Aircraft...included chronic and acute occupational exposure limits and cardiotoxicity. Alternatives that were carcinogens or that had any adverse developmental...gear to fight the fires Does not exceed pain threshold for exposed skin Each unit tested met this performance objective 2. Firefighting

Integrated Advanced Microwave Sounding Unit-A (AMSU-A). Performance Verification Report: METSAT AMSU-A2 Antenna Drive Subsystem, P/N 1331200-2, S/N 106

NASA Technical Reports Server (NTRS)

Higgins, T.

1998-01-01

An antenna drive subsystem test was performed on the METSAT AMSU-A2 S/N 106 instrument. The objective of the test was to demonstrate compliance with applicable paragraphs of AMSU-A specifications S480-80. Tests were conducted at both the subassembly and instrument level.

Development of Performance Standards for Employment Service. Volume 2: Part B. Findings and Recommendations. Final Report.

ERIC Educational Resources Information Center

Fairchild, Charles K.

The objective of the project was to develop methods for establishing output and input performance standards for the placement and placement support functions of the United States Employment Service (ES). This part of Volume 2 reports substantive findings and recommendations developed during the course of the project. A key recommendation is that…

Exergoeconomic analysis and optimization of an evaporator for a binary mixture of fluids in an organic Rankine cycle

NASA Astrophysics Data System (ADS)

Li, You-Rong; Du, Mei-Tang; Wang, Jian-Ning

2012-12-01

This paper focuses on the research of an evaporator with a binary mixture of organic working fluids in the organic Rankine cycle. Exergoeconomic analysis and performance optimization were performed based on the first and second laws of thermodynamics, and the exergoeconomic theory. The annual total cost per unit heat transfer rate was introduced as the objective function. In this model, the exergy loss cost caused by the heat transfer irreversibility and the capital cost were taken into account; however, the exergy loss due to the frictional pressure drops, heat dissipation to surroundings, and the flow imbalance were neglected. The variation laws of the annual total cost with respect to the number of transfer units and the temperature ratios were presented. Optimal design parameters that minimize the objective function had been obtained, and the effects of some important dimensionless parameters on the optimal performances had also been discussed for three types of evaporator flow arrangements. In addition, optimal design parameters of evaporators were compared with those of condensers.

Digital X-Ray Imager Final Report CRADA No. TSB-1161-95

DOE Office of Scientific and Technical Information (OSTI.GOV)

Logan, C.; Toker, E.

The global objective of this cooperation was to lower the cost and improve the quality of breast health care in the United States. We planned to achieve it by designing a very high performance digital radiography unit for breast surgical specimen radiography in the operating room. These technical goals needed to be achieved at reasonable manufacturing costs to enable MedOptics to achieve high market penetration at a profit.

Despin of a Highly Spinning Object: Despin of the Army’s Unattended Expendable Jammer.

DTIC Science & Technology

1981-09-01

AD-A07 725 HARRY DIAMOND LABS AOELPHI MD F/6 17/4 DESPIN OF A HIGHLY SPINNING OBJECT: DESPIN OF THE ARMY’S UNATTE-ETC(U) SEP al I POLLIN...OF REPORT & PERIOD COVERED lDespin of a Highl%. Spinning Object: Despin of the Technical Report Armss UattededExpedabe Jamer6. PERFORMING ORG. REPORT...Diamond Laboratories AREA & WORK UNIT NUMBERS 28W8 Powder Mill Road Program Ele: 6.37.55. A Adelphi, MD 20783 11. CONTROLLING OFFICE NAME AND ADDRESS

Facility versus unit level reporting of quality indicators in nursing homes when performance monitoring is the goal

PubMed Central

Norton, Peter G; Murray, Michael; Doupe, Malcolm B; Cummings, Greta G; Poss, Jeff W; Squires, Janet E; Teare, Gary F; Estabrooks, Carole A

2014-01-01

Objectives To demonstrate the benefit of defining operational management units in nursing homes and computing quality indicators on these units as well as on the whole facility. Design Calculation of adjusted Resident Assessment Instrument – Minimum Data Set 2.0 (RAI–MDS 2.0) quality indicators for: PRU05 (prevalence of residents with a stage 2–4 pressure ulcer), PAI0X (prevalence of residents with pain) and DRG01 (prevalence of residents receiving an antipsychotic with no diagnosis of psychosis), for quarterly assessments between 2007 and 2011 at unit and facility levels. Comparisons of these risk-adjusted quality indicators using statistical process control (control charts). Setting A representative sample of 30 urban nursing homes in the three Canadian Prairie Provinces. Measurements Explicit decision rules were developed and tested to determine whether the control charts demonstrated improving, worsening, unchanging or unclassifiable trends over the time period. Unit and facility performance were compared. Results In 48.9% of the units studied, unit control chart performance indicated different changes in quality over the reporting period than did the facility chart. Examples are provided to illustrate that these differences lead to quite different quality interventions. Conclusions Our results demonstrate the necessity of considering facility-level and unit-level measurement when calculating quality indicators derived from the RAI–MDS 2.0 data, and quite probably from any RAI measures. PMID:24523428

Feature Selection Methods for Robust Decoding of Finger Movements in a Non-human Primate

PubMed Central

Padmanaban, Subash; Baker, Justin; Greger, Bradley

2018-01-01

Objective: The performance of machine learning algorithms used for neural decoding of dexterous tasks may be impeded due to problems arising when dealing with high-dimensional data. The objective of feature selection algorithms is to choose a near-optimal subset of features from the original feature space to improve the performance of the decoding algorithm. The aim of our study was to compare the effects of four feature selection techniques, Wilcoxon signed-rank test, Relative Importance, Principal Component Analysis (PCA), and Mutual Information Maximization on SVM classification performance for a dexterous decoding task. Approach: A nonhuman primate (NHP) was trained to perform small coordinated movements—similar to typing. An array of microelectrodes was implanted in the hand area of the motor cortex of the NHP and used to record action potentials (AP) during finger movements. A Support Vector Machine (SVM) was used to classify which finger movement the NHP was making based upon AP firing rates. We used the SVM classification to examine the functional parameters of (i) robustness to simulated failure and (ii) longevity of classification. We also compared the effect of using isolated-neuron and multi-unit firing rates as the feature vector supplied to the SVM. Main results: The average decoding accuracy for multi-unit features and single-unit features using Mutual Information Maximization (MIM) across 47 sessions was 96.74 ± 3.5% and 97.65 ± 3.36% respectively. The reduction in decoding accuracy between using 100% of the features and 10% of features based on MIM was 45.56% (from 93.7 to 51.09%) and 4.75% (from 95.32 to 90.79%) for multi-unit and single-unit features respectively. MIM had best performance compared to other feature selection methods. Significance: These results suggest improved decoding performance can be achieved by using optimally selected features. The results based on clinically relevant performance metrics also suggest that the decoding algorithm can be made robust by using optimal features and feature selection algorithms. We believe that even a few percent increase in performance is important and improves the decoding accuracy of the machine learning algorithm potentially increasing the ease of use of a brain machine interface. PMID:29467602

Chimpanzees' (Pan troglodytes) use of gaze cues in object-choice tasks: different methods yield different results.

PubMed

Barth, Jochen; Reaux, James E; Povinelli, Daniel J

2005-04-01

To assess the influence of different procedures on chimpanzees' performance in object-choice tasks, five adult chimpanzees were tested using three experimenter-given cues to food location: gazing, glancing, and pointing. These cues were delivered to the subjects in an identical fashion but were deployed within the context of two distinct meta-procedures that have been previously employed with this species with conflicting results. In one procedure, the subjects entered the test unit and approached the experimenter (who had already established the cue) on each trial. In the other procedure, the subjects stayed in the test unit throughout a session, witnessed the hiding procedure, and waited for a delay of 10 s during which the cue was provided. The subjects scored at high levels far exceeding chance in response to the gaze cue only when they approached the experimenter for each trial. They performed at chance levels when they stayed inside the test unit throughout the session. They scored at chance levels on all other cues irrespective of the procedure. These findings imply that (a) chimpanzees can immediately exploit social gaze cues, and (b) previous conflicting findings were likely due to the different meta-procedures that were used.

Primary immunodeficiency investigation in patients during and after hospitalization in a pediatric Intensive Care Unit

PubMed Central

Suavinho, Érica; de Nápolis, Ana Carolina R.; Segundo, Gesmar Rodrigues S.

2014-01-01

Objective: To analyze whether the patients with severe infections, admitted in the Pediatric Intensive Care Unit of the Hospital de Clínicas of the Universidade Federal de Uberlândia, underwent the active screening for primary immunodeficiencies (PID). Methods: Retrospective study that assessed the data records of patients with any severe infections admitted in the Pediatric Intensive Care Unit, covering a period from January 2011 to January 2012, in order to confirm if they performed an initial investigation for PID with blood count and immunoglobulin dosage. Results: In the studied period, 53 children were hospitalized with severe infections in the Pediatric Intensive Care Unit, and only in seven (13.2%) the initial investigation of PID was performed. Among these patients, 3/7 (42.8%) showed quantitative alterations in immunoglobulin G (IgG) levels, 1/7 (14.3%) had the diagnosis of cyclic neutropenia, and 1/7 (14.3%) presented thrombocytopenia and a final diagnosis of Wiskott-Aldrich syndrome. Therefore, the PID diagnosis was confirmed in 5/7 (71.4%) of the patients. Conclusions: The investigation of PID in patients with severe infections has not been routinely performed in the Pediatric Intensive Care Unit. Our findings suggest the necessity of performing PID investigation in this group of patients. PMID:24676187

A Constrained and Versioned Data Model for TEAM Data

NASA Astrophysics Data System (ADS)

Andelman, S.; Baru, C.; Chandra, S.; Fegraus, E.; Lin, K.

2009-04-01

The objective of the Tropical Ecology Assessment and Monitoring Network (www.teamnetwork.org) is "To generate real time data for monitoring long-term trends in tropical biodiversity through a global network of TEAM sites (i.e. field stations in tropical forests), providing an early warning system on the status of biodiversity to effectively guide conservation action". To achieve this, the TEAM Network operates by collecting data via standardized protocols at TEAM Sites. The standardized TEAM protocols include the Climate, Vegetation and Terrestrial Vertebrate Protocols. Some sites also implement additional protocols. There are currently 7 TEAM Sites with plans to grow the network to 15 by June 30, 2009 and 50 TEAM Sites by the end of 2010. At each TEAM Site, data is gathered as defined by the protocols and according to a predefined sampling schedule. The TEAM data is organized and stored in a database based on the TEAM spatio-temporal data model. This data model is at the core of the TEAM Information System - it consumes and executes spatio-temporal queries, and analytical functions that are performed on TEAM data, and defines the object data types, relationships and operations that maintain database integrity. The TEAM data model contains object types including types for observation objects (e.g. bird, butterfly and trees), sampling unit, person, role, protocol, site and the relationship of these object types. Each observation data record is a set of attribute values of an observation object and is always associated with a sampling unit, an observation timestamp or time interval, a versioned protocol and data collectors. The operations on the TEAM data model can be classified as read operations, insert operations and update operations. Following are some typical operations: The operation get(site, protocol, [sampling unit block, sampling unit,] start time, end time) returns all data records using the specified protocol and collected at the specified site, block, sampling unit and time range. The operation insertSamplingUnit(sampling unit, site, protocol) saves a new sampling unit into the data model and links it with the site and protocol. The operation updateSampligUnit(sampling_unit_id, attribute, value) changes the attribute (e.g. latitude or longitude) of the sampling unit to the specified value. The operation insertData(observation record, site, protocol, sampling unit, timestamps, data collectors) saves a new observation record into the database and associates it with specified objects. The operation updateData(protocol, data_id, attribute, value) modifies the attribute of an existing observation record to the specified value. All the insert or update operations require: 1) authorization to ensure the user has necessary privileges to perform the operation; 2) timestamp validation to ensure the observation timestamps are in the designated time range specified in the sampling schedule; 3) data validation to check that the data records use correct taxonomy terms and data values. No authorization is performed for get operations, but under some specific condition, a username may be required for the purpose of authentication. Along with the validations above, the TEAM data model also supports human based data validation on observed data through the Data Review subsystem to ensure data quality. The data review is implemented by adding two attributes review_tag and review_comment to each observation data record. The attribute review_tag is used by a reviewer to specify the quality of data, and the attribute review_comment is for reviewers to give more information when a problem is identified. The review_tag attribute can be populated by either the system conducting QA/QC tests or by pre-specified scientific experts. The following is the review operation, which is actually a special case of the operation updateData: The operation updateReview(protocol, data_id, judgment, comment) sets the attribute review_tag and review_comment to the specified values. By systematically tracking every step, The TEAM data model can roll back to any previous state. This is achieved by introducing a historical data container for each editable object type. When the operation updateData is applied to an object to modify its attribute, the object will be tagged with the current timestamp and the name of the user who conducts the operation, the tagged object will then be moved into the historical data container, and finally a new object will be created with the new value for the specified attribute. The diagram illustrates the architecture of the TEAM data management system. A data collector can use the Data Ingestion subsystem to load new data records into the TEAM data model. The system establishes a first level of review (i.e. meets minimum data standards via QA/QC tests). Further review is done via experts and they can verify and provide their comments on data records through the Data Review subsystem. The data editor can then address data records based on the reviewer's comments. Users can use the Data Query and Download application to find data by sites, protocols and time ranges. The Data Query and Download system packages selected data with the data license and important metadata information into a single package and delivers it to the user.

Deep Neural Networks Rival the Representation of Primate IT Cortex for Core Visual Object Recognition

PubMed Central

Cadieu, Charles F.; Hong, Ha; Yamins, Daniel L. K.; Pinto, Nicolas; Ardila, Diego; Solomon, Ethan A.; Majaj, Najib J.; DiCarlo, James J.

2014-01-01

The primate visual system achieves remarkable visual object recognition performance even in brief presentations, and under changes to object exemplar, geometric transformations, and background variation (a.k.a. core visual object recognition). This remarkable performance is mediated by the representation formed in inferior temporal (IT) cortex. In parallel, recent advances in machine learning have led to ever higher performing models of object recognition using artificial deep neural networks (DNNs). It remains unclear, however, whether the representational performance of DNNs rivals that of the brain. To accurately produce such a comparison, a major difficulty has been a unifying metric that accounts for experimental limitations, such as the amount of noise, the number of neural recording sites, and the number of trials, and computational limitations, such as the complexity of the decoding classifier and the number of classifier training examples. In this work, we perform a direct comparison that corrects for these experimental limitations and computational considerations. As part of our methodology, we propose an extension of “kernel analysis” that measures the generalization accuracy as a function of representational complexity. Our evaluations show that, unlike previous bio-inspired models, the latest DNNs rival the representational performance of IT cortex on this visual object recognition task. Furthermore, we show that models that perform well on measures of representational performance also perform well on measures of representational similarity to IT, and on measures of predicting individual IT multi-unit responses. Whether these DNNs rely on computational mechanisms similar to the primate visual system is yet to be determined, but, unlike all previous bio-inspired models, that possibility cannot be ruled out merely on representational performance grounds. PMID:25521294

Use of an Acoustic Camera to Evaluate the Performance of Tickler Chains and Draghead Deflectors for Sea Turtle Protection during Hopper Dredging in the United States of America

DTIC Science & Technology

2018-05-01

performance nor effectiveness in protecting sea turtles has been documented.This study was the first step in evaluating TTC as a potential replacement for...draghead turtle deflectors. The primary objective was to evaluate and document operational performance of this technology, not effectiveness of reducing...incidental take. TTC operational performance was monitored using underwater camera systems over a short period of time whereas effectiveness for

Human Exposures to PAHs: an Eastern United States Pilot Study

EPA Science Inventory

Personal exposure monitoring for select polycyclic aromatic hydrocarbons (PAHs) was performed as part of the National Human Exposure Assessment Survey (NHEXAS) Pilot Study in Baltimore, MD and in four surrounding counties (NHEXAS-Maryland). An objective of this effort was to esta...

Competency-Based Preservice Construction Trades Curriculum.

ERIC Educational Resources Information Center

Illinois State Office of Education, Springfield. Div. of Adult Vocational and Technical Education.

This curriculum guide consists of a comprehensive list of competency-based performance objectives dealing with selected skill and knowledge competencies considered basic to the preparation of teacher-educators in residential building construction. Thirteen units of instruction subclassified into forty-one teaching sections are included with…

Competency-Based Recordkeeping. Bulletin 1781.

ERIC Educational Resources Information Center

Nicholls State Univ., Thibodaux, LA.

This model instructional unit was developed to aid business teachers in Louisiana to prepare students in grades 10-12 for business and office employment, further educational experiences, and responsible consumer activity. It provides guidance on model performance objectives, current technology content, sources, and supplemental materials.…

Unmanned spacecraft for surveying earth's resources

NASA Technical Reports Server (NTRS)

George, T. A.

1970-01-01

The technical objectives and payloads for ERTS A and B are discussed. The primary emphasis is on coverage of the United States and the ocean areas immediately adjacent, using 3-camera return beam vidicon TV system, 4-channel multispectral point scanner, data collection system, and wideband video tape recorder. The expected performance and system characteristics of the RBV system and the 4-band multispectral object plane point scanner are outlined. Ground station considerations are also given.

Arcjet thruster research and technology, phase 2

NASA Technical Reports Server (NTRS)

Yano, Steve E.

1991-01-01

The principle objective of Phase 2 was to produce an engineering model N2H4 arcjet system which met typical performance, lifetime, environmental, and interface specifications required to support a 10-year N-S stationkeeping mission for a communications spacecraft. The system includes an N2H4 arcjet thruster, power conditioning unit (PCU), and the interconnecting power cable assembly. This objective was met with the successful conclusion of an extensive system test series.

The Department of Energy`s Remedial Action Assessment System (RAAS): Decision support tools for performing streamlined feasibility studies

DOE Office of Scientific and Technical Information (OSTI.GOV)

White, M.K.

1994-06-01

The United States Department of Energy (DOE) faces the major task of cleaning up hundreds of waste sites across the nation, which will require completion of a large number of remedial investigation/feasibility studies (RI/FSs). The intent of each RI/FS is to characterize the waste problems and environmental conditions at the operable unit level, segment the remediation problem into manageable medium-specific and contaminant-specific pieces, define corresponding remediation objectives, and identify remedial response actions to satisfy those objectives. The RI/FS team can then identify combinations of remediation technologies that will meet the remediation objectives. Finally, the team must evaluate these remedial alternativesmore » in terms of effectiveness, implementability, cost, and acceptability. The Remedial Action Assessment System (RAAS) is being developed by Pacific Northwest Laboratory (PNL) to support DOE in this effort.« less

Rapid Prototyping of an Aircraft Model in an Object-Oriented Simulation

NASA Technical Reports Server (NTRS)

Kenney, P. Sean

2003-01-01

A team was created to participate in the Mars Scout Opportunity. Trade studies determined that an aircraft provided the best opportunity to complete the science objectives of the team. A high fidelity six degree of freedom flight simulation was required to provide credible evidence that the aircraft design fulfilled mission objectives and to support the aircraft design process by providing performance evaluations. The team created the simulation using the Langley Standard Real-Time Simulation in C++ (LaSRS++) application framework. A rapid prototyping approach was necessary because the team had only three months to both develop the aircraft simulation model and evaluate aircraft performance as the design and mission parameters matured. The design of LaSRS++ enabled rapid-prototyping in several ways. First, the framework allowed component models to be designed, implemented, unit-tested, and integrated quickly. Next, the framework provides a highly reusable infrastructure that allowed developers to maximize code reuse while concentrating on aircraft and mission specific features. Finally, the framework reduces risk by providing reusable components that allow developers to build a quality product with a compressed testing cycle that relies heavily on unit testing of new components.

Using Lean principles to manage throughput on an inpatient rehabilitation unit.

PubMed

Chiodo, Anthony; Wilke, Ruste; Bakshi, Rishi; Craig, Anita; Duwe, Doug; Hurvitz, Edward

2012-11-01

Performance improvement is a mainstay of operations management and maintenance of certification. In this study at a University Hospital inpatient rehabilitation unit, Lean management techniques were used to manage throughput of patients into and out of the inpatient rehabilitation unit. At the start of this process, the average admission time to the rehabilitation unit was 5:00 p.m., with a median time of 3:30 p.m., and no patients received therapy on the day of admission. Within 8 mos, the mean admission time was 1:22 p.m., 50% of the patients were on the rehabilitation unit by 1:00 p.m., and more than 70% of all patients received therapy on the day of admission. Negative variance from this performance was evaluated, the identification of inefficient discharges holding up admissions as a problem was identified, and a Lean workshop was initiated. Once this problem was tackled, the prime objective of 70% of patients receiving therapy on the date of admission was consistently met. Lean management tools are effective in improving throughput on an inpatient rehabilitation unit.

Magnetic Resonance Spectroscopy: An Objectives Technique for the Quantification of Prostate Cancer Pathologies

DTIC Science & Technology

2006-02-01

5d. PROJECT NUMBER Leo L. Cheng, Ph.D. 5e. TASK NUMBER 5f. WORK UNIT NUMBER 7. PERFORMING ORGANIZATION NAME(S...Above all we were extremely pleased that our results reported in this article were selected to be included in the Department of Defense, United ...Astra- kas LG, Zarifi MK, Scott RM, Anthony DC, Gonzalez RG, Black PM. Biochemical characterization of pediatric brain tumors by using in vivo and

Apollo telescope mount thermal systems unit thermal vacuum test

NASA Technical Reports Server (NTRS)

Trucks, H. F.; Hueter, U.; Wise, J. H.; Bachtel, F. D.

1971-01-01

The Apollo Telescope Mount's thermal systems unit was utilized to conduct a full-scale thermal vacuum test to verify the thermal design and the analytical techniques used to develop the thermal mathematical models. Thermal vacuum test philosophy, test objectives configuration, test monitoring, environment simulation, vehicle test performance, and data correlation are discussed. Emphasis is placed on planning and execution of the thermal vacuum test with particular attention on problems encountered in conducting a test of this maguitude.

Physical Chemistry, Science (Experimental): 5318.60.

ERIC Educational Resources Information Center

Mary, Charlotta B.; Feuer, Jerold

Performance objectives are stated for this secondary school instructional unit concerned with aspects of physical chemistry, involving the physical properties of matter, and laws and theories regarding chemical interaction. Lists of films and state-adopted and other texts are presented. Included are enrollment guidelines; an outline summarizing…

Mechanical Drafting.

ERIC Educational Resources Information Center

McClain, Gerald R.

This publication, the third in a series on drafting, is intended to strengthen students' competence in the specialized field of mechanical drafting. The text consists of instructional materials for both teacher and students, written in terms of student performance using measurable objectives. The course includes 11 units. Each instructional unit…

Using KPIs To Anchor Strategic Choices.

ERIC Educational Resources Information Center

Rowley, Daniel James

1997-01-01

Colleges and universities should approach strategic change by establishing three kinds of key performance indicators (KPIs): mandated (state-mandates or other imposed objectives); management (determined by the administration); and derived (from the special intentions of institutional units). By assembling the three kinds of KPIs, the strategic…

Military Performance and Health Monitoring in Extreme Environments

DTIC Science & Technology

2009-10-01

radiation and wind to give a true temperature reading . At high ambient temperatures, in particular in combination with solar radiation, objects may...Equivital multi-sensor unit enabling the real-time, parallel and continuous assessment of EKG (and heart rate), respiration (and respiration rate), skin

South Carolina Guide for Introduction to Marketing.

ERIC Educational Resources Information Center

Vaughan, Ellen C.; Elliott, Ronald T.

This introduction to marketing guide addresses the three domains of learning: psychomotor, cognitive, and affective. The guide contains suggestions for specific classroom activities for each domain. Each unit or task in this guide contains a competency statement followed by performance objectives, job-relevant instructional activities,…

OBJECTIVE REDUCTION OF THE SPACE-TIME DOMAIN DIMENSIONALITY FOR EVALUATING MODEL PERFORMANCE

EPA Science Inventory

In the United States, photochemical air quality models are the principal tools used by governmental agencies to develop emission reduction strategies aimed at achieving National Ambient Air Quality Standards (NAAQS). Before they can be applied with confidence in a regulatory sett...

Final test results for the ground operations demonstration unit for liquid hydrogen

NASA Astrophysics Data System (ADS)

Notardonato, W. U.; Swanger, A. M.; Fesmire, J. E.; Jumper, K. M.; Johnson, W. L.; Tomsik, T. M.

2017-12-01

Described herein is a comprehensive project-a large-scale test of an integrated refrigeration and storage system called the Ground Operations and Demonstration Unit for Liquid Hydrogen (GODU LH2), sponsored by the Advanced Exploration Systems Program and constructed at Kennedy Space Center. A commercial cryogenic refrigerator interfaced with a 125,000 l liquid hydrogen tank and auxiliary systems in a manner that enabled control of the propellant state by extracting heat via a closed loop Brayton cycle refrigerator coupled to a novel internal heat exchanger. Three primary objectives were demonstrating zero-loss storage and transfer, gaseous liquefaction, and propellant densification. Testing was performed at three different liquid hydrogen fill-levels. Data were collected on tank pressure, internal tank temperature profiles, mass flow in and out of the system, and refrigeration system performance. All test objectives were successfully achieved during approximately two years of testing. A summary of the final results is presented in this paper.

A PRESSURE ULCER AND FALL RATE QUALITY COMPOSITE INDEX FOR ACUTE CARE UNITS: A MEASURE DEVELOPMENT STUDY

PubMed Central

Jayawardhana, Ananda; Burman, Mary E.; Dunton, Nancy E.; Staggs, Vincent S.; Bergquist-Beringer, Sandra; Gajewski, Byron J.

2016-01-01

Background Composite indices are single measures that combine the strengths of two or more individual measures and provide broader, easy-to-use measures for evaluation of provider performance and comparisons across units and hospitals to support quality improvement. Objective The study objective was to develop a unit-level inpatient composite nursing care quality performance index – the Pressure Ulcer and Fall Rate Quality Composite Index. Design Two-phase measure development study. Settings 5,144 patient care units in 857 United States hospitals participating in the National Database of Nursing Quality Indictors® during the year 2013. Methods The Pressure Ulcer and Fall Rate Quality Composite Index was developed in two phases. In Phase 1 the formula was generated using a utility function and generalized penalty analysis. Experts with experience in healthcare quality measurement provided the point of indicator equivalence. In Phase 2 initial validity evidence was gathered based on hypothesized relationships between the Pressure Ulcer and Fall Rate Quality Composite Index and other variables using two-level (unit, hospital) hierarchical linear mixed modeling. Results The Pressure Ulcer and Fall Rate Quality Composite Index = 100 − PUR − FR, where PUR is pressure ulcer rate and FR is total fall rate. Higher scores indicate better quality. Bland-Altman plots demonstrated agreement between pairs of experts and provided evidence for inter-rater reliability of the formula. The validation process demonstrated that higher registered nurse skill mix, higher percent of registered nurses with a baccalaureate in nursing or higher degree, higher percent of registered nurses with national specialty certification, and lower percent of hours supplied by agency staff were significantly associated with higher Pressure Ulcer and Fall Rate Quality Composite Index scores. Higher percentages of unit patients at risk for a hospital-acquired pressure ulcer and higher unit rates of physical restraint use were not associated with higher Pressure Ulcer and Fall Rate Quality Composite Index scores. Conclusions The Pressure Ulcer and Fall Rate Quality Composite Index is a step toward providing a more holistic perspective of unit level nursing quality than individual measures and may help nurses nursing administrators obtain a broader view of which patient care units are the higher and lower performers. Further study is needed to examine the usability of the Pressure Ulcer and Fall Rate Quality Composite Index. PMID:27607602

Post-construction monitoring of a Core-Loc™ breakwater using tripod-based LiDAR

USGS Publications Warehouse

Podoski, Jessica H.; Bawden, Gerald W.; Bond, Sandra; Smith, Thomas D.; Foster, James

2010-01-01

The goal of the technology application described herein is to determine whether breakwater monitoring data collected using Tripod (or Terrestrial) Light Detection and Ranging (T-LiDAR) can give insight into processes such as how Core-Loc™ concrete armour units nest following construction, and in turn how settlement affects armour layer stability, concrete cap performance, and armour unit breakage.  A further objective is that this information can then be incorporated into the design of future projects using concrete armour units.  The results of this application of T-LiDAR, including the challenges encountered and the conclusions drawn regarding initial concrete armour unit movement will be presented in this paper.

A navigation and control system for an autonomous rescue vehicle in the space station environment

NASA Technical Reports Server (NTRS)

Merkel, Lawrence

1991-01-01

A navigation and control system was designed and implemented for an orbital autonomous rescue vehicle envisioned to retrieve astronauts or equipment in the case that they become disengaged from the space station. The rescue vehicle, termed the Extra-Vehicular Activity Retriever (EVAR), has an on-board inertial measurement unit ahd GPS receivers for self state estimation, a laser range imager (LRI) and cameras for object state estimation, and a data link for reception of space station state information. The states of the retriever and objects (obstacles and the target object) are estimated by inertial state propagation which is corrected via measurements from the GPS, the LRI system, or the camera system. Kalman filters are utilized to perform sensor fusion and estimate the state propagation errors. Control actuation is performed by a Manned Maneuvering Unit (MMU). Phase plane control techniques are used to control the rotational and translational state of the retriever. The translational controller provides station-keeping or motion along either Clohessy-Wiltshire trajectories or straight line trajectories in the LVLH frame of any sufficiently observed object or of the space station. The software was used to successfully control a prototype EVAR on an air bearing floor facility, and a simulated EVAR operating in a simulated orbital environment. The design of the navigation system and the control system are presented. Also discussed are the hardware systems and the overall software architecture.

Curriculum of Work-Study Program, Special Education.

ERIC Educational Resources Information Center

Smith, Darrell; And Others

The work study curriculum guide for secondary special education students was designed for use in a classroom atmosphere simulating a work setting. Performance objectives and suggested activities are listed for 10 units (sample subunits in parentheses): purchasing habits (advertising methods, types of stores and merchandise, sales tax); budgeting…

Comprehensive Small Engine Repair.

ERIC Educational Resources Information Center

Hires, Bill; And Others

This curriculum guide contains the basic information needed to repair all two- and four-stroke cycle engines. The curriculum covers four areas, each consisting of one or more units of instruction that include performance objectives, suggested activities for teacher and students, information sheets, assignment sheets, job sheets, visual aids,…

Rapid test methods for the evaluation of concrete properties.

DOT National Transportation Integrated Search

1982-01-01

The objective of the project was to place a CERL/Kelly-Vail testing unit and a microwave oven in the field to perform tests of plastic concrete on construction projects. : The CERL/K-V tests were to determine water and cement content of the concrete ...

Meteorite Material Model for Structural Properties

NASA Technical Reports Server (NTRS)

Agrawal, Parul; Carlozzi, Alexander A.; Karajeh, Zaid S.; Bryson, Kathryn L.

2017-01-01

To assess the threat posed by an asteroid entering Earth's atmosphere, one must predict if, when, and how it fragments during entry. A comprehensive understanding of the asteroid material properties is needed to achieve this objective. At present, the meteorite material found on earth are the only objects from an entering asteroid that can be used as representative material and be tested inside a laboratory setting. Due to complex petrology, it is technically challenging and expensive to obtain reliable material properties by means of laboratory test for a family of meteorites. In order to circumvent this challenge, meteorite unit models are developed to determine the effective material properties including Youngs modulus, compressive and tensile strengths and Poissons ratio, that in turn would help deduce the properties of asteroids. The meteorite unit is a representative volume that accounts for diverse minerals, porosity, cracks and matrix composition. The Youngs Modulus and Poissons Ratio in the meteorite units are calculated by performing several hundreds of Monte-Carlo simulations by randomly distributing the various phases inside these units. Once these values are obtained, cracks are introduced in these meteorite units. The size, orientation and distribution of cracks are derived by extensive CT-scans and visual scans of various meteorites from the same family. Subsequently, simulations are performed to attain stress-strain relations, strength and effective modulus values in the presence of these cracks. The meteorite unit models are presented for H, L and LL ordinary chondrites, as well as for terrestrial basalt. In the case of the latter, data from the simulations is compared with experimental data to validate the methodology. These material models will be subsequently used in fragmentation modeling of full scale asteroids.

Multiple Hollow Cathode Wear Testing for the Space Station Plasma Contactor

NASA Technical Reports Server (NTRS)

Soulas, George C.

1994-01-01

A wear test of four hollow cathodes was conducted to resolve issues associated with the Space Station plasma contactor. The objectives of this test were to evaluate unit-to-unit dispersions, verify the transportability of contamination control protocols developed by the project, and to evaluate cathode contamination control and activation procedures to enable simplification of the gas feed system and heater power processor. These objectives were achieved by wear testing four cathodes concurrently to 2000 hours. Test results showed maximum unit-to-unit deviations for discharge voltages and cathode tip temperatures to be +/-3 percent and +/-2 percent, respectively, of the nominal values. Cathodes utilizing contamination control procedures known to increase cathode lifetime showed no trends in their monitored parameters that would indicate a possible failure, demonstrating that contamination control procedures had been successfully transferred. Comparisons of cathodes utilizing and not utilizing a purifier or simplified activation procedure showed similar behavior during wear testing and pre- and post-test performance characterizations. This behavior indicates that use of simplified cathode systems and procedures is consistent with long cathode lifetimes.

Manned maneuvering unit mission definition study. Volume 3: MMU ancillary support equipment and attachment concepts

NASA Technical Reports Server (NTRS)

1975-01-01

An analysis of Manned Maneuvering Units (MMU) ancillary support equipment and attachment concepts is presented. The major objectives of the study are defined as: (1) identifying MMU applications which would supplement space shuttle safety and effectiveness, (2) to define general MMU performance and control requirements to satisfy candidate shuttle applications, (3) to develop concepts for attaching MMUs to various worksites and equipment, and (4) to identify requirements and develop concepts for MMU ancillary equipment.

How the Army Runs: A Senior Leader Reference Handbook, 2011-2012

DTIC Science & Technology

2011-01-01

5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) 5d. PROJECT NUMBER 5e. TASK NUMBER 5f. WORK UNIT NUMBER 7. PERFORMING ORGANIZATION NAME(S) AND ADDRESS(ES...objectives, carrying out engineer construction projects , by emphasizing the uniqueness of the function and providing associated specialty career...Bringing about change, whether evolutionary or revolutionary, in cases where performance does not meet present requirements, or the projected security

How The Army Runs. A Senior Leader Reference Handbook 2009-2010

DTIC Science & Technology

2010-01-01

PROGRAM ELEMENT NUMBER 6. AUTHOR(S) 5d. PROJECT NUMBER 5e. TASK NUMBER 5f. WORK UNIT NUMBER 7. PERFORMING ORGANIZATION NAME(S) AND ADDRESS(ES...recruiting objectives, carrying out engineer construction projects , by emphasizing the uniqueness of the function and providing associated specialty career...change, whether evolutionary or revolutionary, in cases where performance does not meet present requirements, or the projected security needs of the

The Levels of Questioning and Their Effects Upon Student Performance Above the Knowledge Level of Bloom's Taxonomy of Educational Objectives. A Research Paper.

ERIC Educational Resources Information Center

Martikean, Alexandria

Reported is an investigation of the effects on student performance above the knowledge level (Bloom's taxonomy) as influenced by the use of teacher's questioning strategies. Two parallel forms of an elementary science unit on plants and seeds were constructed. In form A, most of the teacher questions were low level in terms of cognitive thinking;…

The Effects of a Customer Service Initiative at Moncrief Army Community Hospital

DTIC Science & Technology

2008-04-06

Vroom (1964) in job satisfaction , Linder-Pelz argued that expectancy (i.e., the evaluation of object attributes) was determined by the relationship...Sf. WORK UNIT NUMBER 7. PERFORMING ORGANIZATION NAME(S) AND ADORESS(ES) MONCRIEF ARMY COMMUNITY HOSPITAL 4 500 STUART STREET FORT JACKSON, SC 29207...8. PERFORMING ORGANIZATION REPORT NUMBER 9. SPONSORING / MONITORING AGENCY NAME(S) AND ADDRESS(ES) US ARMY MEDICAL DEPARTMENT CENTER AND SCHOOL

GRay: A Massively Parallel GPU-based Code for Ray Tracing in Relativistic Spacetimes

NASA Astrophysics Data System (ADS)

Chan, Chi-kwan; Psaltis, Dimitrios; Özel, Feryal

2013-11-01

We introduce GRay, a massively parallel integrator designed to trace the trajectories of billions of photons in a curved spacetime. This graphics-processing-unit (GPU)-based integrator employs the stream processing paradigm, is implemented in CUDA C/C++, and runs on nVidia graphics cards. The peak performance of GRay using single-precision floating-point arithmetic on a single GPU exceeds 300 GFLOP (or 1 ns per photon per time step). For a realistic problem, where the peak performance cannot be reached, GRay is two orders of magnitude faster than existing central-processing-unit-based ray-tracing codes. This performance enhancement allows more effective searches of large parameter spaces when comparing theoretical predictions of images, spectra, and light curves from the vicinities of compact objects to observations. GRay can also perform on-the-fly ray tracing within general relativistic magnetohydrodynamic algorithms that simulate accretion flows around compact objects. Making use of this algorithm, we calculate the properties of the shadows of Kerr black holes and the photon rings that surround them. We also provide accurate fitting formulae of their dependencies on black hole spin and observer inclination, which can be used to interpret upcoming observations of the black holes at the center of the Milky Way, as well as M87, with the Event Horizon Telescope.

Performance evaluation of automated manufacturing systems using generalized stochastic Petri Nets. Ph.D. Thesis

NASA Technical Reports Server (NTRS)

Al-Jaar, Robert Y.; Desrochers, Alan A.

1989-01-01

The main objective of this research is to develop a generic modeling methodology with a flexible and modular framework to aid in the design and performance evaluation of integrated manufacturing systems using a unified model. After a thorough examination of the available modeling methods, the Petri Net approach was adopted. The concurrent and asynchronous nature of manufacturing systems are easily captured by Petri Net models. Three basic modules were developed: machine, buffer, and Decision Making Unit. The machine and buffer modules are used for modeling transfer lines and production networks. The Decision Making Unit models the functions of a computer node in a complex Decision Making Unit Architecture. The underlying model is a Generalized Stochastic Petri Net (GSPN) that can be used for performance evaluation and structural analysis. GSPN's were chosen because they help manage the complexity of modeling large manufacturing systems. There is no need to enumerate all the possible states of the Markov Chain since they are automatically generated from the GSPN model.

Design and manufacture of the integrated field unit for the NIRSpec spectrometer on JWST

NASA Astrophysics Data System (ADS)

Lobb, Daniel; Robertson, David; Closs, Martin; Barnes, Andy

2008-09-01

The NIRSpec imaging spectrometer, which forms part of the James Webb Space Telescope instrumentation, will include an integrated field unit (IFU). The IFU will be tasked specifically with efficient analysis of extended objects, including galaxies; it will accept a square image area at the spectrometer entrance field, dissect this area into 30 parallel sub-slits, and image the sub-slits end-to-end, forming a single virtual entrance slit. The IFU, uses all-mirror optics to operate over the spectral range 700nm to 5000nm. 95 mirrors and the main support structure are made in a common aluminium alloy, to achieve athermal performance down to an operating temperature of around 30K. Relatively complex mirror surface shapes are produced by diamond machining. The IFU has been designed and constructed by SSTL, with optics produced by CfAI; the unit is currently undergoing performance tests. This paper describes the IFU optical design and performance, and outlines the mirror manufacturing methods and alignment procedures.

Object-based benefits without object-based representations.

PubMed

Fougnie, Daryl; Cormiea, Sarah M; Alvarez, George A

2013-08-01

Influential theories of visual working memory have proposed that the basic units of memory are integrated object representations. Key support for this proposal is provided by the same object benefit: It is easier to remember multiple features of a single object than the same set of features distributed across multiple objects. Here, we replicate the object benefit but demonstrate that features are not stored as single, integrated representations. Specifically, participants could remember 10 features better when arranged in 5 objects compared to 10 objects, yet memory for one object feature was largely independent of memory for the other object feature. These results rule out the possibility that integrated representations drive the object benefit and require a revision of the concept of object-based memory representations. We propose that working memory is object-based in regard to the factors that enhance performance but feature based in regard to the level of representational failure. PsycINFO Database Record (c) 2013 APA, all rights reserved.

Developments in Acoustic Metamaterials for Acoustic Ground Cloaks

NASA Astrophysics Data System (ADS)

Kerrian, Peter Adam

The objective of acoustic cloaking is to eliminate both the back scattered and forward scattered acoustic fields by redirecting the incident wave around an object. Acoustic ground cloaks, which conceal an object on a rigid reflecting surface, utilize a linear coordinate transformation to map the flat surface to a void by compressing space into two cloaking regions consisting of a homogeneous anisotropic acoustic metafluid. Transformation acoustics allows for the realization of a coordinate transformation through a reinterpretation of the scale factors as a new material in the original coordinate system. Previous work has demonstrated at least three types of unit cells exhibit homogeneous anisotropic mass density and homogeneous isotropic bulk modulus: alternating layers of homogeneous isotropic fluids, perforated plates and solid inclusions. The primary focus of this dissertation is to demonstrate underwater anisotropic mass density with a solid inclusion unit cell and realize an underwater perforated plate acoustic ground cloak. An in depth analysis into the methods used to characterize the effective material parameters of solid inclusion unit cells with water as the background fluid was performed for both single inclusion unit cells as well as multi-inclusion unit cells. The degree of density anisotropy obtainable for a rigid single inclusion unit cell is limited by the size of the inclusion. However, a greater degree of anisotropy can be achieved by introducing additional inclusions into the unit cell design. For example, including a foam material that is less dense than the background fluid, results in an anisotropic density tensor with one component greater than and one component less than the value of the background fluid. The results of a parametric study determined that for a multi-inclusion unit cell, the effective material parameters can be controlled by the dimensions of the rigid inclusion as well as the material parameters and dimensions of the foam inclusions. Non-destructive acoustic excitation techniques were used to extract the material parameters of different grades of foam to identify the ideal grade for use in a multi-inclusion unit cell. Single inclusion and multi-inclusion bulk metamaterial samples were constructed and tested to characterize the effective material properties to determine if they exhibited the desired homogeneous anisotropic behavior. The single steel inclusion metamaterial behaved as expected, demonstrating anisotropic mass density and isotropic bulk modulus. Almost no sound energy was transmitted through the multi-inclusion metamaterial, contrary to expectation, because of the presence of air bubbles, both on the surface of the foam as well as potentially in between the inclusions. Finally, an underwater acoustic ground cloak was constructed from perforated steel plates and experimentally tested to conceal an object on a pressure release surface. The perforated plate acoustic ground cloak successfully cloaked the scattered object over a broad frequency range of 7 [kHz] to 12 [kHz]. There was excellent agreement between the phase of the surface reflection and the cloak reflection with a small amplitude difference attributed to the difference between a water - air and a water - mylar - air boundary. Above 15 [kHz], the cloaking performance decreased as the effective material parameters of the perforated plate metamaterial deviated from the required material parameters.

Conservation of strategic metals

NASA Technical Reports Server (NTRS)

Stephens, J. R.

1982-01-01

A long-range program in support of the aerospace industry aimed at reducing the use of strategic materials in gas turbine engines is discussed. The program, which is called COSAM (Conservation of Strategic Aerospace Materials), has three general objectives. The first objective is to contribute basic scientific understanding to the turbine engine technology bank so that our national security is not jeopardized if our strategic material supply lines are disrupted. The second objective is to help reduce the dependence of United States military and civilian gas turbine engines on worldwide supply and price fluctuations in regard to strategic materials. The third objective is, through research, to contribute to the United States position of preeminence in the world gas turbine engine markets by minimizing the acquisition costs and optimizing the performance of gas turbine engines. Three major research thrusts are planned: strategic element substitution; advanced processing concepts; and alternate material identification. Results from research and any required supporting technology will give industry the materials technology options it needs to make tradeoffs in material properties for critical components against the cost and availability impacts related to their strategic metal content.

South Carolina Guide for Small Business Management.

ERIC Educational Resources Information Center

Vaughan, Ellen C.; Elliott, Ronald T.

This guide for small business management in South Carolina addresses the three domains of learning: psychomotor, cognitive, and affective. The guide contains suggestions for specific classroom activities for each domain. Each of the 11 units or tasks in the guide contains a competency statement followed by performance objectives, job-relevant…

Gunn and Heid: Teaching Small Group Development with Reality TV

ERIC Educational Resources Information Center

Kopaczewski, Shana

2017-01-01

Courses: Small group communication or any courses with units on group/team work. Objective: In this single-class activity, students will use reality TV to identify Tuckman's five phases of group development: forming, storming, norming, performing, and adjourning. Students analyze how phases of group development manifest through group interaction…

Aerobic Digestion. Student Manual. Biological Treatment Process Control.

ERIC Educational Resources Information Center

Klopping, Paul H.

This manual contains the textual material for a single-lesson unit on aerobic sludge digestion. Topic areas addressed include: (1) theory of aerobic digestion; (2) system components; (3) performance factors; (4) indicators of stable operation; and (5) operational problems and their solutions. A list of objectives, glossary of key terms, and…

The Stock Market Game, an Educator's Guide. Elementary School Edition [Grades 6-8].

ERIC Educational Resources Information Center

New York City Board of Education, Brooklyn, NY. Div. of Curriculum and Instruction.

Helping students learn about taking responsibility for the planning and shaping of their personal financial futures is this 13-lesson teaching unit's goal. Each lesson includes performance objectives, materials, motivational activities, development, and enrichment activities. Concepts are taught through worksheets, stories, and games. Students are…

Undergraduate Astronautics at the United States Naval Academy.

ERIC Educational Resources Information Center

Bagaria, William J.

1991-01-01

The aerospace engineering curriculum at the U.S. Naval Academy which includes an astronautical and an aeronautical track is described. The objective of the program is to give students the necessary astronautical engineering background to perform a preliminary spacecraft design during the last semester of the program. (KR)

Performance Characteristics of Automotive Engines in the United States : Report No. 10. Chevrolet (1975) 250 CID 1-BBL Engine.

DOT National Transportation Integrated Search

1977-08-01

Experimental data were obtained in dynamometer tests of a 1975 Chevrolet 250-CID, 1-bbl engine to determine fuel consumption and emissions (hydrocarbons, carbon monoxide, and oxides of nitrogen) at steady-state engine operating modes. The objective o...

Performance Characteristics of Automotive Engines in the United States : Report No. 9. Chrysler (1975) 225-CID 1-BBL Engine.

DOT National Transportation Integrated Search

1977-08-01

Experimental data were obtained in dynamometer tests of a 1975 Chrysler 225-CID, 1-bbl engine to determine fuel consumption and emissions (hydrocarbon, carbon monoxide, and oxides of nitrogen) at steady-state engine operating modes. The objective of ...

Advanced Electricity. Microprocessors and Robotics. Curriculum Development. Bulletin 1803.

ERIC Educational Resources Information Center

Southeastern Louisiana Univ., Hammond.

This model instructional unit was developed to aid industrial arts/technology education teachers in Louisiana to teach a course on microprocessors and robotics in grades 11 and 12. It provides guidance on model performance objectives, current technology content, sources, and supplemental materials. Following a course description, rationale, and…

Lernen Wir Deutsch! Part 10, German: 7535.02.

ERIC Educational Resources Information Center

Dade County Public Schools, Miami, FL.

This course in German prescribes broad goals and performance objectives for the development of cultural awareness, student attitudes, and listening, speaking, writing, and reading skills. The content of the course, based on Units 21 and 22 of "A-LM German: Level 2" and "Reading for Meaning," requires mastery of selected…

Multiple Learning Strategies Project. Medical Assistant. [Regular Vocational. Vol. 1.

ERIC Educational Resources Information Center

Varney, Beverly; And Others

This instructional package, one of four designed for regular vocational students, focuses on the vocational area of medical assistant. Contained in this document are twenty-six learning modules organized into three units: language; receptioning; and asepsis. Each module includes these elements: a performance objective page telling what will be…

Performance Characteristics of Automotive Engines in the United States : Third Series - Report No. 14 - 1978 Buick 196 CID (3.2L)

DOT National Transportation Integrated Search

1981-02-01

Experimental data were obtained in dynamometer tests of a 1978 Buick 231 CID turbocharged to determine fuel consumption and emissions (hydrocarbon, carbon monoxide, oxides of nitrogen) at steady-state engine operating modes. The objective of the prog...

Performance Characteristics of Automotive Engines in the United States : Third Series - Report No. 13 - 1977 Chrysler 318 CID (5.2L)

DOT National Transportation Integrated Search

1981-06-01

Experimental data were obtained in dynamometer tests of a 1977 Chrysler 318 CID engine to determine fuel consumption and emissions (hydrocarbon, carbon monoxide, oxides of nitrogen) at steady-state engine operating modes. The objective of the program...

Performance Characteristics of Automotive Engines in the United States, Third Series - Report No. 10, 1978 Honda, 98 CID (1.6 Liters)

DOT National Transportation Integrated Search

1979-02-01

Experimental data were obtained in dynamometer tests of a 1978 Honda 98 CID engine to determine fuel consumption and emissions (hydrocarbon, carbon monoxide, oxides of nitrogen) at steady-state engine operating modes. The objective of the program is ...

Performance Characteristics of Automotive Engines in the United States : Second Series - Report No. 4 - 1976 Chevrolet 85 CID (1.4 Liters), IV.

DOT National Transportation Integrated Search

1978-05-01

Experimental data were obtained in dynamometer tests of a 1976 Chevrolet 85 CID engine to determine fuel consumption and emissions (hydrocarbon, carbon monoxide, oxides of nitrogen) at steady-state engine-operating modes. The objective of the program...

Performance Characteristics of Automotive Engines in the United States : First Series - Report No. 20 - 1975 Chevrolet 350 CID (5.7 Liters) ...

DOT National Transportation Integrated Search

1978-05-01

Experimental data were obtained in dynamometer tests of a 1975 Chevrolet 350 CID engine to determine fuel consumption and emissions (hydrocarbon, carbon monoxide, oxides of nitrogen) at steady-state engine-operating modes. The objective of the progra...

Performance Characteristics of Automotive Engines in the United States : Report No. 11. Chrysler (1975) 318-CID 2-BBL Engine.

DOT National Transportation Integrated Search

1977-08-01

Experimental data were obtained in dynamometer tests of a 1975 Chrysler 318-CID, 2-bbl engine to determine fuel consumption and emissions (hydrocarbon, carbon monoxide, and oxides of nitrogen) at steady-state engine operating modes. The objective of ...

Consumer-Homemaking I Curriculum Guide. Bulletin 1810.

ERIC Educational Resources Information Center

Nicholls State Univ., Thibodaux, LA.

This model instructional unit was developed to aid home economics teachers in Louisiana to teach a course in consumer and homemaking education in grades 9-10. The guide is designed for a full-year comprehensive home economics course. It provides guidance on model performance objectives, current technology content, sources, and supplemental…

Long-Term Memory for a Common Object.

ERIC Educational Resources Information Center

Nickerson, Raymond S.; Adams, Marilyn Jager

1979-01-01

Five experiments investigated how completely and accurately adults remember the visual details of the common United States penny. Subjects had to draw a penny from unaided recall and select the correct representation of a penny. Performance was poor on all tasks. Implications for long-term memory models were discussed. (Author/RD)

Solid Polymer Electrolyte (SPE) fuel cell technology program

NASA Technical Reports Server (NTRS)

1979-01-01

The overall objectives of the Phase IV Solid Polymer Electrolyte Fuel Cell Technology Program were to: (1) establish fuel cell life and performance at temperatures, pressures and current densities significantly higher than those previously demonstrated; (2) provide the ground work for a space energy storage system based on the solid polymer electrolyte technology (i.e., regenerative H2/O2 fuel cell); (3) design, fabricate and test evaluate a full-scale single cell unit. During this phase, significant progress was made toward the accomplishment of these objectives.

Behavioral Objectives for Selected Units in Business Education.

ERIC Educational Resources Information Center

Hill, Richard K., Ed.; Schmidt, B. June, Ed.

This is a catalog of behavioral objectives organized by units. Each unit contains an outline of the content, a goal statement, and general and specific objectives. The catalog contains a total of 48 units on: business behavior and psychology; business law; business math; business principles and organization; business terminology; communication and…

Improved representation of situational awareness within a dismounted small combat unit constructive simulation

NASA Astrophysics Data System (ADS)

Lee, K. David; Colony, Mike

2011-06-01

Modeling and simulation has been established as a cost-effective means of supporting the development of requirements, exploring doctrinal alternatives, assessing system performance, and performing design trade-off analysis. The Army's constructive simulation for the evaluation of equipment effectiveness in small combat unit operations is currently limited to representation of situation awareness without inclusion of the many uncertainties associated with real world combat environments. The goal of this research is to provide an ability to model situation awareness and decision process uncertainties in order to improve evaluation of the impact of battlefield equipment on ground soldier and small combat unit decision processes. Our Army Probabilistic Inference and Decision Engine (Army-PRIDE) system provides this required uncertainty modeling through the application of two critical techniques that allow Bayesian network technology to be applied to real-time applications. (Object-Oriented Bayesian Network methodology and Object-Oriented Inference technique). In this research, we implement decision process and situation awareness models for a reference scenario using Army-PRIDE and demonstrate its ability to model a variety of uncertainty elements, including: confidence of source, information completeness, and information loss. We also demonstrate that Army-PRIDE improves the realism of the current constructive simulation's decision processes through Monte Carlo simulation.

NASA Conjunction Assessment Organizational Approach and the Associated Determination of Screening Volume Sizes

NASA Technical Reports Server (NTRS)

Newman, Lauri K.; Hejduk, Matthew D.

2015-01-01

NASA is committed to safety of flight for all of its operational assets Performed by CARA at NASA GSFC for robotic satellites Focus of this briefing Performed by TOPO at NASA JSC for human spaceflight he Conjunction Assessment Risk Analysis (CARA) was stood up to offer this service to all NASA robotic satellites Currently provides service to 70 operational satellites NASA unmanned operational assets Other USG assets (USGS, USAF, NOAA) International partner assets Conjunction Assessment (CA) is the process of identifying close approaches between two orbiting objects; sometimes called conjunction screening The Joint Space Operations Center (JSpOC) a USAF unit at Vandenberg AFB, maintains the high accuracy catalog of space objects, screens CARA-supported assets against the catalog, performs OD tasking, and generates close approach data.

Heart failure services in the United Kingdom: rethinking the machine bureaucracy.

PubMed

Hawkins, Nathaniel M; Wright, David J; Capewell, Simon

2013-01-20

Poor outcomes and poor uptake of evidence based therapies persist for patients with heart failure in the United Kingdom. We offer a strategic analysis of services, defining the context, organization and objectives of the service, before focusing on implementation and performance. Critical flaws in past service development and performance are apparent, a consequence of failed performance management, policy and political initiative. The barriers to change and potential solutions are common to many health care systems. Integration, information, financing, incentives, innovation and values: all must be challenged and improved if heart failure services are to succeed. Modern healthcare requires open adaptive systems, continually learning and improving. The system also needs controls. Performance indicators should be simple, clinically relevant, and outcome focused. Heart failure presents one of the greatest opportunities to improve symptoms and survival with existing technology. To do so, heart failure services require radical reorganization. Copyright © 2011 Elsevier Ireland Ltd. All rights reserved.

Performing mathematics activities with non-standard units of measurement using robots controlled via speech-generating devices: three case studies.

PubMed

Adams, Kim D; Cook, Albert M

2017-07-01

Purpose To examine how using a Lego robot controlled via a speech-generating device (SGD) can contribute to how students with physical and communication impairments perform hands-on and communicative mathematics measurement activities. This study was a follow-up to a previous study. Method Three students with cerebral palsy used the robot to measure objects using non-standard units, such as straws, and then compared and ordered the objects using the resulting measurement. Their performance was assessed, and the manipulation and communication events were observed. Teachers and education assistants were interviewed regarding robot use. Results Similar benefits to the previous study were found in this study. Gaps in student procedural knowledge were identified such as knowing to place measurement units tip-to-tip, and students' reporting revealed gaps in conceptual understanding. However, performance improved with repeated practice. Stakeholders identified that some robot tasks took too long or were too difficult to perform. Conclusions Having access to both their SGD and a robot gave the students multiple ways to show their understanding of the measurement concepts. Though they could participate actively in the new mathematics activities, robot use is most appropriate in short tasks requiring reasonable operational skill. Implications for Rehabilitation Lego robots controlled via speech-generating devices (SGDs) can help students to engage in the mathematics pedagogy of performing hands-on activities while communicating about concepts. Students can "show what they know" using the Lego robots, and report and reflect on concepts using the SGD. Level 1 and Level 2 mathematics measurement activities have been adapted to be accomplished by the Lego robot. Other activities can likely be accomplished with similar robot adaptations (e.g., gripper, pen). It is not recommended to use the robot to measure items that are long, or perform measurements that require high operational competence in order to be successful.

Fast neuromimetic object recognition using FPGA outperforms GPU implementations.

PubMed

Orchard, Garrick; Martin, Jacob G; Vogelstein, R Jacob; Etienne-Cummings, Ralph

2013-08-01

Recognition of objects in still images has traditionally been regarded as a difficult computational problem. Although modern automated methods for visual object recognition have achieved steadily increasing recognition accuracy, even the most advanced computational vision approaches are unable to obtain performance equal to that of humans. This has led to the creation of many biologically inspired models of visual object recognition, among them the hierarchical model and X (HMAX) model. HMAX is traditionally known to achieve high accuracy in visual object recognition tasks at the expense of significant computational complexity. Increasing complexity, in turn, increases computation time, reducing the number of images that can be processed per unit time. In this paper we describe how the computationally intensive and biologically inspired HMAX model for visual object recognition can be modified for implementation on a commercial field-programmable aate Array, specifically the Xilinx Virtex 6 ML605 evaluation board with XC6VLX240T FPGA. We show that with minor modifications to the traditional HMAX model we can perform recognition on images of size 128 × 128 pixels at a rate of 190 images per second with a less than 1% loss in recognition accuracy in both binary and multiclass visual object recognition tasks.

Large-area landslide susceptibility with optimized slope-units

NASA Astrophysics Data System (ADS)

Alvioli, Massimiliano; Marchesini, Ivan; Reichenbach, Paola; Rossi, Mauro; Ardizzone, Francesca; Fiorucci, Federica; Guzzetti, Fausto

2017-04-01

A Slope-Unit (SU) is a type of morphological terrain unit bounded by drainage and divide lines that maximize the within-unit homogeneity and the between-unit heterogeneity across distinct physical and geographical boundaries [1]. Compared to other terrain subdivisions, SU are morphological terrain unit well related to the natural (i.e., geological, geomorphological, hydrological) processes that shape and characterize natural slopes. This makes SU easily recognizable in the field or in topographic base maps, and well suited for environmental and geomorphological analysis, in particular for landslide susceptibility (LS) modelling. An optimal subdivision of an area into a set of SU depends on multiple factors: size and complexity of the study area, quality and resolution of the available terrain elevation data, purpose of the terrain subdivision, scale and resolution of the phenomena for which SU are delineated. We use the recently developed r.slopeunits software [2,3] for the automatic, parametric delineation of SU within the open source GRASS GIS based on terrain elevation data and a small number of user-defined parameters. The software provides subdivisions consisting of SU with different shapes and sizes, as a function of the input parameters. In this work, we describe a procedure for the optimal selection of the user parameters through the production of a large number of realizations of the LS model. We tested the software and the optimization procedure in a 2,000 km2 area in Umbria, Central Italy. For LS zonation we adopt a logistic regression model implemented in an well-known software [4,5], using about 50 independent variables. To select the optimal SU partition for LS zonation, we want to define a metric which is able to quantify simultaneously: (i) slope-unit internal homogeneity (ii) slope-unit external heterogeneity (iii) landslide susceptibility model performance. To this end, we define a comprehensive objective function S, as the product of three normalized objective functions dealing with the points (i)-(ii)-(iii) independently. We use an intra-segment variance function V, the Moran's autocorrelation index I and the AUCROC function R arising from the application of the logistic regression model. Maximization of the objective function S = f(I,V,R) as a function of the r.slopeunits input parameters provides an objective and reproducible way to select the optimal parameter combination for a proper SU subdivision for LS modelling. We further perform an analysis of the statistical significance of the LS models as a function of the r.slopeunits input parameters, focusing on the degree of coarseness of each subdivision. We find that the LRM, when applied to subdivisions with large average SU size, has a very poor statistical significance, resulting in only few (5%, typically lithological) variables being used in the regression due to the large heterogeneity of all variables within each unit, while up to 35% of the variables are used when SU are very small. This behavior was largely expected and provides further evidence that an objective method to select SU size is highly desirable. [1] Guzzetti, F. et al., Geomorphology 31, (1999) 181-216 [2] Alvioli, M. et al., Geoscientific Model Development 9 (2016), 3975-3991 [3] http://geomorphology.irpi.cnr.it/tools/slope-units [4] Rossi, M. et al., Geomorphology 114, (2010) 129-142 [5] Rossi, M. and Reichenbach, P., Geoscientific Model Development 9 (2016), 3533-3543

Closely-Spaced Objects and Mathematical Groups Combined With a Robust Observational Method

DTIC Science & Technology

2009-09-01

AUTHOR( S ) 5d. PROJECT NUMBER 5e. TASK NUMBER 5f. WORK UNIT NUMBER 7. PERFORMING ORGANIZATION NAME( S ) AND ADDRESS(ES) Air Force Research Laboratory...Space Vehicles Directorate,Kirtland AFB,NM,87117 8. PERFORMING ORGANIZATION REPORT NUMBER 9. SPONSORING/MONITORING AGENCY NAME( S ) AND ADDRESS(ES...10. SPONSOR/MONITOR’S ACRONYM( S ) 11. SPONSOR/MONITOR’S REPORT NUMBER( S ) 12. DISTRIBUTION/AVAILABILITY STATEMENT Approved for public release

Mnemonic neuronal activity in somatosensory cortex.

PubMed Central

Zhou, Y D; Fuster, J M

1996-01-01

Single-unit activity was recorded from the hand areas of the somatosensory cortex of monkeys trained to perform a haptic delayed matching to sample task with objects of identical dimensions but different surface features. During the memory retention period of the task (delay), many units showed sustained firing frequency change, either excitation or inhibition. In some cases, firing during that period was significantly higher after one sample object than after another. These observations indicate the participation of somatosensory neurons not only in the perception but in the short-term memory of tactile stimuli. Neurons most directly implicated in tactile memory are (i) those with object-selective delay activity, (ii) those with nondifferential delay activity but without activity related to preparation for movement, and (iii) those with delay activity in the haptic-haptic delayed matching task but no such activity in a control visuo-haptic delayed matching task. The results indicate that cells in early stages of cortical somatosensory processing participate in haptic short-term memory. PMID:8927629

Behavioral Objectives and Related Test Items for Selected Units in Automotive Mechanics.

ERIC Educational Resources Information Center

Hill, Richard K., Ed.; And Others

This is a catalog of behavioral objectives for Vocational Automotive Mechanics organized by units of instruction as listed in the State curriculum guide. Each unit contains a suggested outline of content, a goal statement, and general and specific objectives. The units taught are: introduction to the automobile; basic hand tools--fasteners and…

Decoding visual object categories from temporal correlations of ECoG signals.

PubMed

Majima, Kei; Matsuo, Takeshi; Kawasaki, Keisuke; Kawai, Kensuke; Saito, Nobuhito; Hasegawa, Isao; Kamitani, Yukiyasu

2014-04-15

How visual object categories are represented in the brain is one of the key questions in neuroscience. Studies on low-level visual features have shown that relative timings or phases of neural activity between multiple brain locations encode information. However, whether such temporal patterns of neural activity are used in the representation of visual objects is unknown. Here, we examined whether and how visual object categories could be predicted (or decoded) from temporal patterns of electrocorticographic (ECoG) signals from the temporal cortex in five patients with epilepsy. We used temporal correlations between electrodes as input features, and compared the decoding performance with features defined by spectral power and phase from individual electrodes. While using power or phase alone, the decoding accuracy was significantly better than chance, correlations alone or those combined with power outperformed other features. Decoding performance with correlations was degraded by shuffling the order of trials of the same category in each electrode, indicating that the relative time series between electrodes in each trial is critical. Analysis using a sliding time window revealed that decoding performance with correlations began to rise earlier than that with power. This earlier increase in performance was replicated by a model using phase differences to encode categories. These results suggest that activity patterns arising from interactions between multiple neuronal units carry additional information on visual object categories. Copyright © 2013 Elsevier Inc. All rights reserved.

"Can you see me now?" An objective metric for predicting intelligibility of compressed American Sign Language video

NASA Astrophysics Data System (ADS)

Ciaramello, Francis M.; Hemami, Sheila S.

2007-02-01

For members of the Deaf Community in the United States, current communication tools include TTY/TTD services, video relay services, and text-based communication. With the growth of cellular technology, mobile sign language conversations are becoming a possibility. Proper coding techniques must be employed to compress American Sign Language (ASL) video for low-rate transmission while maintaining the quality of the conversation. In order to evaluate these techniques, an appropriate quality metric is needed. This paper demonstrates that traditional video quality metrics, such as PSNR, fail to predict subjective intelligibility scores. By considering the unique structure of ASL video, an appropriate objective metric is developed. Face and hand segmentation is performed using skin-color detection techniques. The distortions in the face and hand regions are optimally weighted and pooled across all frames to create an objective intelligibility score for a distorted sequence. The objective intelligibility metric performs significantly better than PSNR in terms of correlation with subjective responses.

Yield, morphological characteristics, and chemical composition of European- and Mediterranean-derived birdsfoot trefoil cultivars grown in the colder continental United States

USDA-ARS?s Scientific Manuscript database

Commonly grown North American birdsfoot trefoil (BFT, Lotus corniculatus L.) varieties, such as Norcen,0 produce forage with insufficient condensed tannin (CT) concentrations to maximize ruminant livestock performance. Our objective was to identify European and Mediterranean genotypes with higher CT...

Performance Characteristics of Automotive Engines in the United States : First Series - Report No. 12 - 1975 Perkins Diesel 247 CID (4.0 Liters)

DOT National Transportation Integrated Search

1978-04-01

Experimental data were obtained in dynamometer tests of a 1975 Perkins 247-CID diesel engine to determine fuel consumption and emissions (hydrocarbon, carbon monoxide, oxides of nitrogen) at steady-state engine-operating modes. The objective of the p...

Self-Synchronization, the Future Joint Force and the United States Army’s Objective Force

DTIC Science & Technology

2003-05-22

Hall 250 Gibbon Ave Fort Leavenworth, KS66027 8. PERFORMING ORGANIZATION REPORT NUMBER ATZL-SWV 9. SPONSORING/MONITORING AGENCY NAME AND ADDRESS , 10...Institute Proceedings, 124, no.1., January 1998, 28-35. Conner , William M., "Emerging Army Doctrine: Command and Control." Military Review, March-April 2002

Performance Characteristics of Automotive Engines in the United States : First Series - Report No. 14 - 1975 Mazda Rotary 70 CID (1.1 Liters), 4V

DOT National Transportation Integrated Search

1978-05-01

Experimental data were obtained in dynamometer tests of a 1975 Mazda 70 CID, 4V rotary engine to determine fuel consumption and emissions (hydrocarbon, carbon monoxide, oxides of nitrogen) at steady-state engine-operating modes. The objective of the ...

Activities for Studying Heavenly Bodies. Outdoor Education Series. Bulletin No. 247-M.

ERIC Educational Resources Information Center

Montgomery County Public Schools, Rockville, MD.

This teacher guide for the astronomy unit of an outdoor education program consists of a series of performance objectives, intended to provide interesting, hands-on activities, involving interdisciplinary skills, that augment commitments of the mathematics, sciences, and social studies program of the Montgomery County (Maryland) Public Schools.…

Performance Characteristics of Automotive Engines in the United States, Third Series - Report No. 6, 1978 Volkswagen Diesel, 90 CID (1.5 Liter), F.I.

DOT National Transportation Integrated Search

1979-02-01

Experimental data were obtained in dynamometer tests of a 1978 VW 90 CID engine to determine fuel consumption and emissions (hydrocarbon, carbon monoxide, oxides of nitrogen) at steady-state engine operating modes. The objective of the program is to ...

Performance Characteristics of Automotive Engines in the United States, Third Series - Report No. 7, 1978 Ford, 98 CID (1.6 Liters), 2V

DOT National Transportation Integrated Search

1979-02-01

Experimental data were obtained in dynamometer tests of a 1977 Chrysler 318 CID engine to determine fuel consumption and emissions (hydrocarbon, carbon monoxide, oxides of nitrogen) at steady-state engine operating modes. The objective of the program...

Monetary Policy and Economic Performance: Views Before and After the Freeze.

ERIC Educational Resources Information Center

Yeager, Leland B.

To assist policy makers, scholars, businessmen, the press, and the public by providing objective analysis of national and international issues, this research institute has presented a special economic analysis which details the views of a University professor of economics on the recent United States wage-price freeze. Focusing on the shortcomings…

75 FR 19453 - Suggestions for Environmental Cooperation Pursuant to the United States-Peru Environmental...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-14

... persons, to submit written comments or suggestions regarding items for inclusion in a new Work Program for... the performance of the forest concession system in meeting economic, social, and ecological objectives... Governance. We are requesting ideas and suggestions that may be considered for inclusion in the next Work...

Performance Characteristics of Automotive Engines in the United States : First Series - Report No. 13 - 1975 American Motors 258 CID (4.2 Liters)

DOT National Transportation Integrated Search

1978-04-01

Experimental data were obtained in dynamometer tests of a 1975 AMC 258-CID production 1V engine to determine fuel consumption and emissions (hydrocarbon, carbon monoxide, oxides of nitrogen) at steady-state engine-operating modes. The objective of th...

Performance Characteristics of Automotive Engines in the United States, Third Series - Report No. 2, 1978 Pontiac, 301 CID (4.9 Liters), 2V

DOT National Transportation Integrated Search

1979-02-01

Experimental data were obtained in dynamometer tests of a 1978 Pontiac 301 CID engine to determine fuel consumption and emissions (hydrocarbon, carbon monoxide, oxides of nitrogen) at steady-state engine operating modes. The objective of the program ...

Performance Characteristics of Automotive Engines in the United States : First Series - Report No. 17 - 1975 Buick 455 CID (7.5 Liters), 4V

DOT National Transportation Integrated Search

1978-05-01

Experimental data were obtained in dynamometer tests of a 1975 Buick 455 CID, 4V engine to determine fuel consumption and emissions (hydrocarbon, carbon monoxide, oxides of nitrogen) at steady-state engine-operating modes. The objective of the progra...

Performance Characteristics of Automotive Engines in the United States : Second Series - Report No. 2 - 1976 Chevrolet 305 CID (5.0 Liters), 2V

DOT National Transportation Integrated Search

1978-04-01

Experimental data were obtained in dynamometer tests of a 1976 Chevrolet 305-CID V-8 engine to determine fuel consumption and emissions (hydrocarbon, carbon monoxide, oxides of nitrogen) at steady-state engine-operating modes. The objective of the pr...

Performance Characteristics of Automotive Engines in the United States : Third Series - Report No. 12 - 1978 Ford 140 CID (2.3 Liters), 2V

DOT National Transportation Integrated Search

1980-09-01

Experimental data were obtained in dynamometer tests of a 1978 Ford 140 CID engine to determine fuel consumption and emissions (hydrocarbon, carbon monoxide, oxides of nitrogen) at steady-state engine operating modes. The objective of the program is ...

Performance Characteristics of Automotive Engines in the United States : First Series - Report No. 16 - 1975 Volvo 121 CID (2.0 Liters), F.I.

DOT National Transportation Integrated Search

1978-05-01

Experimental data were obtained in dynamometer tests of a 1975 Volvo, 2.0 liter (121 CID) engine to determine fuel consumption and emissions (hydrocarbon, carbon monoxide, oxides of nitrogen) at steady-state engine-operating modes. The objective of t...

Performance Characteristics of Automotive Engines in the United States : Second Series - Report No. 5 - 1977 Ford 140 CID (2.3 Liters), 2V

DOT National Transportation Integrated Search

1978-05-01

Experimental data were obtained in dynamometer tests of a 1977 Ford 2.3 liter (140 CID) engine to determine fuel consumption and emissions (hydrocarbon, carbon monoxide, oxides of nitrogen) at steady-state engine-operating modes. The objective of the...

Performance Characteristics of Automotive Engines in the United States : Third Series - Report No. 1 - 1977 Volvo 130 CID (2.1 Liters), F.I.

DOT National Transportation Integrated Search

1978-05-01

Experimental data were obtained in dynamometer tests of a 1977 Volvo 130 CID engine to determine fuel consumption and emissions (hydrocarbon, carbon monoxide, oxides of nitrogen) at steady-state engine-operating modes. The objective of the program is...

Performance Characteristics of Automotive Engines in the United States : Second Series - Report No. 7 - 1977 Ford 171 CID (2.8 Liters), 2V

DOT National Transportation Integrated Search

1978-05-01

Experimental data were obtained in dynamometer tests of a 1977 Ford 171 CID engine to determine fuel consumption and emissions (hydrocarbon, carbon monoxide, oxides of nitrogen) at steady-state engine-operating modes. The objective of the program is ...

Performance Characteristics of Automotive Engines in the United States : First Series - Report No. 15 - 1975 Dodge Colt 98 CID (1.6 Liters), 2V

DOT National Transportation Integrated Search

1978-05-01

Experimental data were obtained in dynamometer tests of a 1975 Dodge Colt 1.6 liter (98 CID) engine to determine fuel consumption and emissions (hydrocarbon, carbon monoxide, oxides of nitrogen) at steady-state engine-operating modes. The objective o...

Performance Characteristics of Automotive Engines in the United States : Second Series - Report No. 3 - 1977 Chrysler 225 CID (3.7 Liters), 2V

DOT National Transportation Integrated Search

1978-04-01

Experimental data were obtained in dynamometer tests of a 1977 Chrysler 225-CID engine to determine fuel consumption and emissions (hydrocarbon, carbon monoxide, oxides of nitrogen) at steady-state engine-operating modes. The objective of the program...

Performance Characteristics of Automotive Engines in the United States, Third Series - Report No. 9, 1978 Ford, 300 CID (4.9 Liters), 1V

DOT National Transportation Integrated Search

1979-02-01

Experimental data were obtained in dynamometer tests of a 1978 Ford 140 300 CID engine to determine fuel consumption and emissions (hydrocarbon, carbon monoxide, oxides of nitrogen) at steady-state engine operating modes. The objective of the program...

Performance Characteristics of Automotive Engines in the United States : First Series - Report No. 18 - 1976 Ford 400 CID (6.6 Liters), 2V

DOT National Transportation Integrated Search

1978-05-01

Experimental data were obtained in dynamometer tests of a 1976 Ford 400 CID, 2V engine to determine fuel consumption and emissions (hydrocarbon, carbon monoxide, oxides of nitrogen) at steady-state engine-operating modes. The objective of the program...

Performance Characteristics of Automotive Engines in the United States : First Series - Report No. 19 - 1975 Ford Windsor 351 CID (5.7 Liters), 2V

DOT National Transportation Integrated Search

1978-05-01

Experimental data were obtained in dynamometer tests of a 1975 Ford 351 CID, 2V, Windsor engine to determine fuel consumption and emissions (hydrocarbon, carbon monoxide, oxides of nitrogen) at steady-state engine-operating modes. The objective of th...

Performance Characteristics of Automotive Engines in the United States, Third Series - Report No. 5, 1978 Chevrolet, 200 CID (3.3 Liter), 2V

DOT National Transportation Integrated Search

1979-02-01

Experimental data were obtained in dynamometer tests of a 1978 Chevrolet 200 CID engine to determine fuel consumption and emissions (hydrocarbon, carbon monoxide, oxides of nitrogen) at steady-state engine operating modes. The objective of the progra...

Performance Characteristics of Automotive Engines in the United States, Third Series, Report No. 8, 1978 Buick, 231 CID (3.8 Liters), 4V, Turbocharge

DOT National Transportation Integrated Search

1979-02-01

Experimental data were obtained in dynamometer tests of a 1978 Buick 231 CID turbocharged to determine fuel consumption and emissions (hydrocarbon, carbon monoxide, oxides of nitrogen) at steady-state engine operating modes. The objective of the prog...

Performance Characteristics of Automotive Engines in the United States, Third Series - Report No. 4, 1978 Pontiac, 151 CID (2.5 Liters), 2V

DOT National Transportation Integrated Search

1979-02-01

Experimental data were obtained in dynamometer tests of a 1978 Pontiac 151 CID engine to determine fuel consumption and emissions (hydrocarbon, carbon monoxide, oxides of nitrogen) at steady-state engine operating modes. The objective of the program ...

Performance Characteristics of Automotive Engines in the United States, Third Series, Report No. 3, 1978 AMC, 121 CID (2.0 Liters), 2V

DOT National Transportation Integrated Search

1979-02-01

Experimental data were obtained in dynamometer tests of a 1978 AMC 121 CID engine to determine fuel consumption and emissions (hydrocarbon, carbon monoxide, oxides of nitrogen) at steady-state engine operating modes. The objective of the program is t...

Performance Characteristics of Automotive Engines in the United States : Second Series - Report No. 6 - 1976 Nissan Diesel 198 CID (3.2 Liters), F.I.

DOT National Transportation Integrated Search

1978-05-01

Experimental data were obtained in dynamometer tests of a 1976 Nissan diesel engine, Model SD-33 CN6-33, to determine fuel consumption and emissions (hydrocarbon, carbon monoxide, oxides of nitrogen) at steady-state engine-operating modes. The object...

Performance Measures in Courses Using Computer-Aided Personalized System of Instruction

ERIC Educational Resources Information Center

Springer, C. R.; Pear, J. J.

2008-01-01

Archived data from four courses taught with computer-aided personalized system of instruction (CAPSI)--an online, self-paced, instructional program--were used to explore the relationship between objectively rescored final exam grades, peer reviewing, and progress rate--i.e., the rate at which students completed unit tests. There was a strong…

An Analysis of Testing Time within a Mastery-Based Medical School Course.

ERIC Educational Resources Information Center

Wade, David R.; Williams, Reed G.

1979-01-01

Southern Illinois University School of Medicine's personalized teaching system has the following features: students are provided with behavioral objectives prior to instruction; passing levels for tests are set in advance and are independent of class performance; and the program is divided into small units and students are tested frequently. (LBH)

Learning spatially coherent properties of the visual world in connectionist networks

NASA Astrophysics Data System (ADS)

Becker, Suzanna; Hinton, Geoffrey E.

1991-10-01

In the unsupervised learning paradigm, a network of neuron-like units is presented with an ensemble of input patterns from a structured environment, such as the visual world, and learns to represent the regularities in that input. The major goal in developing unsupervised learning algorithms is to find objective functions that characterize the quality of the network's representation without explicitly specifying the desired outputs of any of the units. The sort of objective functions considered cause a unit to become tuned to spatially coherent features of visual images (such as texture, depth, shading, and surface orientation), by learning to predict the outputs of other units which have spatially adjacent receptive fields. Simulations show that using an information-theoretic algorithm called IMAX, a network can be trained to represent depth by observing random dot stereograms of surfaces with continuously varying disparities. Once a layer of depth-tuned units has developed, subsequent layers are trained to perform surface interpolation of curved surfaces, by learning to predict the depth of one image region based on depth measurements in surrounding regions. An extension of the basic model allows a population of competing neurons to learn a distributed code for disparity, which naturally gives rise to a representation of discontinuities.

[Nursing interventions on the physical environment of Neonatal Intensive Care Units].

PubMed

Miquel Capó Rn, I

2016-01-01

The objectives of this study are to analyse nursing interventions regarding noise and lighting that influence neurodevelopment of the preterm infant in the Neonatal Intensive Care Unit. A review of the literature was performed using the databases: Cuiden Plus, PubMed, IBECS and Cochrane Library Plus. The inclusion and exclusion criteria were established in accordance with the objectives and limits used in each database. Of the 35 articles used, most were descriptive quantitative studies based on the measurement of sound pressure levels and lighting in the Neonatal Intensive Care Units. The countries included in this study are Brazil and the United States, and the variables analysed were the recording the times of light and noise. Based on the high levels of light and noise recorded in the Neonatal Intensive Care Units, nursing interventions that should be carried out to reduce them are described. The evidence indicates that after the implementation of these interventions, the high levels of both environmental stimuli are reduced significantly. Despite the extensive literature published on this problem, the levels of light and noise continue to exceed the recommended limits. Therefore, nurses need to increase and enhance their efforts in this environment, in order to positively influence neurodevelopment of premature newborn. Copyright © 2016 Elsevier España, S.L.U. y SEEIUC. All rights reserved.

Applied Meteorology Unit (AMU) Quarterly Report - Fourth Quarter FY-09

NASA Technical Reports Server (NTRS)

Bauman, William; Crawford, Winifred; Barrett, Joe; Watson, Leela; Wheeler, Mark

2009-01-01

This report summarizes the Applied Meteorology Unit (AMU) activities for the fourth quarter of Fiscal Year 2009 (July - September 2009). Tasks reports include: (1) Peak Wind Tool for User Launch Commit Criteria (LCC), (2) Objective Lightning Probability Tool. Phase III, (3) Peak Wind Tool for General Forecasting. Phase II, (4) Update and Maintain Advanced Regional Prediction System (ARPS) Data Analysis System (ADAS), (5) Verify MesoNAM Performance (6) develop a Graphical User Interface to update selected parameters for the Hybrid Single-Particle Lagrangian Integrated Trajectory (HYSPLlT)

Application of the Activity-Based Costing Method for Unit-Cost Calculation in a Hospital.

PubMed

Javid, Mahdi; Hadian, Mohammad; Ghaderi, Hossein; Ghaffari, Shahram; Salehi, Masoud

2015-05-17

Choosing an appropriate accounting system for hospital has always been a challenge for hospital managers. Traditional cost system (TCS) causes cost distortions in hospital. Activity-based costing (ABC) method is a new and more effective cost system. This study aimed to compare ABC with TCS method in calculating the unit cost of medical services and to assess its applicability in Kashani Hospital, Shahrekord City, Iran.‎ This cross-sectional study was performed on accounting data of Kashani Hospital in 2013. Data on accounting reports of 2012 and other relevant sources at the end of 2012 were included. To apply ABC method, the hospital was divided into several cost centers and five cost categories were defined: wage, equipment, space, material, and overhead costs. Then activity centers were defined. ABC method was performed into two phases. First, the total costs of cost centers were assigned to activities by using related cost factors. Then the costs of activities were divided to cost objects by using cost drivers. After determining the cost of objects, the cost price of medical services was calculated and compared with those obtained from TCS.‎ The Kashani Hospital had 81 physicians, 306 nurses, and 328 beds with the mean occupancy rate of 67.4% during 2012. Unit cost of medical services, cost price of occupancy bed per day, and cost per outpatient service were calculated. The total unit costs by ABC and TCS were respectively 187.95 and 137.70 USD, showing 50.34 USD more unit cost by ABC method. ABC method represented more accurate information on the major cost components. By utilizing ABC, hospital managers have a valuable accounting system that provides a true insight into the organizational costs of their department.

Engagement as predictors of performance in a single cohort of undergraduate chiropractic students

PubMed Central

Rix, Jacqueline; Dewhurst, Philip; Cooke, Caroline; Newell, David

2018-01-01

Objective: To investigate the potential association of novel academic and nonacademic factors with chiropractic student academic performance. Methods: Students enrolled into year 1 of a chiropractic master's degree (MChiro) at our college were selected for this study. Data collected included demographics, attendance, virtual learning environment use, additional learning needs, previous degree qualifications, and summative marks. Differences between students who had to take an examination more than once (resit) and nonresit students were explored using t test and χ2 analysis. Relationships between attendance and end-of-year marks were explored using regression analysis. Results: Male students outperformed female students in four of the six units and as the total year average. Students who attended <80% of classes were more likely to have a resit in one or more units (relative risk [RR] = 2.6; 95% confidence interval [CI], 1.4–4.9). Students who performed poorly (<70%) in the semester 1 unit of a course on human structure and failed the semester 1 practical assessment of a course on clinical management were significantly more likely to have one or more resit assessments in semester 2 units (RR = 3.5 [95% CI, 2.2–5.7]; RR = 3.2 [95% CI, 2.0–4.9]). Attendance and unit 105 were independent predictors of one or more resits at the end-of-year (R2 = 0.86, p < .001). Conclusion: Attendance and first semester summative marks were associated with end-of-year performance. As such, these markers of performance may be used to flag struggling students in the program. PMID:29332429

[Integrated Development of Full-automatic Fluorescence Analyzer].

PubMed

Zhang, Mei; Lin, Zhibo; Yuan, Peng; Yao, Zhifeng; Hu, Yueming

2015-10-01

In view of the fact that medical inspection equipment sold in the domestic market is mainly imported from abroad and very expensive, we developed a full-automatic fluorescence analyzer in our center, presented in this paper. The present paper introduces the hardware architecture design of FPGA/DSP motion controlling card+PC+ STM32 embedded micro processing unit, software system based on C# multi thread, design and implementation of double-unit communication in detail. By simplifying the hardware structure, selecting hardware legitimately and adopting control system software to object-oriented technology, we have improved the precision and velocity of the control system significantly. Finally, the performance test showed that the control system could meet the needs of automated fluorescence analyzer on the functionality, performance and cost.

A Study of Wind Turbine Comprehensive Operational Assessment Model Based on EM-PCA Algorithm

NASA Astrophysics Data System (ADS)

Zhou, Minqiang; Xu, Bin; Zhan, Yangyan; Ren, Danyuan; Liu, Dexing

2018-01-01

To assess wind turbine performance accurately and provide theoretical basis for wind farm management, a hybrid assessment model based on Entropy Method and Principle Component Analysis (EM-PCA) was established, which took most factors of operational performance into consideration and reach to a comprehensive result. To verify the model, six wind turbines were chosen as the research objects, the ranking obtained by the method proposed in the paper were 4#>6#>1#>5#>2#>3#, which are completely in conformity with the theoretical ranking, which indicates that the reliability and effectiveness of the EM-PCA method are high. The method could give guidance for processing unit state comparison among different units and launching wind farm operational assessment.

[Industrial nursing. Functions within the basic health unit].

PubMed

Aguilera, Antonio Javier Cortés

2005-02-01

The Law of Prevention of Risks at Work marked an important point of flexion in the tie sanitary professions the field of the labor health. This work will mark the objective to locate to the Industrial Nursing (a company nursing assistant) in a context near the reality. For it, it will be equipped with legal content, and those articles of the Law of Prevention of Risks at Work will be mentioned and of the Regulations for Prevention Services, that establishes the guidelines of performance of the professionals of the Basic Unit of Health (Industrial Medicina and the company nursing assistant) Also will mention the objectives of the First draft of Law of the Reformation of Normative Marco of the Law of Prevention of Risks at Work, consequence of the alarming data of sinisterness and labor accidental.

Simulator Training Requirements and Effectiveness Study (STRES). Part 1. Abstract Bibliography

DTIC Science & Technology

1981-01-01

august 1977 tnrougn January 19dU. The work was performed by a team made up of Canyon Research Group, Inc; Seville Research Corporation; and United...Dr. Thomas Eggemeier. A tri-service STRES Advisory Team participated in guiding and monitoring the work performed during this contract to assure its...8217 STRUCTURE OF THE STRES PROGRAM The primary objectives of STRES, as described in the contract Statement of Work for the present efforts, are to define

Principles of Design for High Performing Organizations: An Assessment of the State of the Field of Organizational Design Research

DTIC Science & Technology

1994-03-01

asked whether the planned structure considered (a) all objectives, (b) all functions, (c) all relevant units of analysis such as the plant , the...literature and provides an integrative model of design for high perfor-ming organizations. The model is based on an analysis of current theories of...important midrange theories underlie much of the work on organizational analysis . 0 Systems Approaches. These approaches emphasize the rational, goal

GRay: A MASSIVELY PARALLEL GPU-BASED CODE FOR RAY TRACING IN RELATIVISTIC SPACETIMES

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chan, Chi-kwan; Psaltis, Dimitrios; Özel, Feryal

We introduce GRay, a massively parallel integrator designed to trace the trajectories of billions of photons in a curved spacetime. This graphics-processing-unit (GPU)-based integrator employs the stream processing paradigm, is implemented in CUDA C/C++, and runs on nVidia graphics cards. The peak performance of GRay using single-precision floating-point arithmetic on a single GPU exceeds 300 GFLOP (or 1 ns per photon per time step). For a realistic problem, where the peak performance cannot be reached, GRay is two orders of magnitude faster than existing central-processing-unit-based ray-tracing codes. This performance enhancement allows more effective searches of large parameter spaces when comparingmore » theoretical predictions of images, spectra, and light curves from the vicinities of compact objects to observations. GRay can also perform on-the-fly ray tracing within general relativistic magnetohydrodynamic algorithms that simulate accretion flows around compact objects. Making use of this algorithm, we calculate the properties of the shadows of Kerr black holes and the photon rings that surround them. We also provide accurate fitting formulae of their dependencies on black hole spin and observer inclination, which can be used to interpret upcoming observations of the black holes at the center of the Milky Way, as well as M87, with the Event Horizon Telescope.« less

Error detection and correction unit with built-in self-test capability for spacecraft applications

NASA Technical Reports Server (NTRS)

Timoc, Constantin

1990-01-01

The objective of this project was to research and develop a 32-bit single chip Error Detection and Correction unit capable of correcting all single bit errors and detecting all double bit errors in the memory systems of a spacecraft. We designed the 32-bit EDAC (Error Detection and Correction unit) based on a modified Hamming code and according to the design specifications and performance requirements. We constructed a laboratory prototype (breadboard) which was converted into a fault simulator. The correctness of the design was verified on the breadboard using an exhaustive set of test cases. A logic diagram of the EDAC was delivered to JPL Section 514 on 4 Oct. 1988.

Performance assessment for continuing and future operations at Solid Waste Storage Area 6

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1994-02-01

This radiological performance assessment for the continued disposal operations at Solid Waste Storage Area 6 (SWSA 6) on the Oak Ridge Reservation (ORR) has been prepared to demonstrate compliance with the requirements of the US DOE. The analysis of SWSA 6 required the use of assumptions to supplement the available site data when the available data were incomplete for the purpose of analysis. Results indicate that SWSA 6 does not presently meet the performance objectives of DOE Order 5820.2A. Changes in operations and continued work on the performance assessment are expected to demonstrate compliance with the performance objectives for continuingmore » operations at the Interim Waste Management Facility (IWMF). All other disposal operations in SWSA 6 are to be discontinued as of January 1, 1994. The disposal units at which disposal operations are discontinued will be subject to CERCLA remediation, which will result in acceptable protection of the public health and safety.« less

Prefocused objective-pinhole unit for beam expanding and spatial filtering.

PubMed

Antes, G P

1973-03-01

A beam-expanding and spatial-filtering device, the prefocused objective-pinhole unit (POP unit), is presented. The design is primarily aimed at greater simplicity in handling and construction than the commercially available lens-pinhole spatial filters (LPSF), for once the pinhole is fixed in the correct position with respect to the objective, the alignment of the whole unit can be made an easy matter.

[National survey of preoperative management and patient selection in ambulatory surgery centers].

PubMed

Papaceit, J; Olona, M; Ramón, C; García-Aguado, R; Rodríguez, R; Rull, M

2003-01-01

The objective of this study was to determine both the selection and preparation criteria in patients in various Spanish ambulatory surgery centers, as well as the impact of these criteria on their results. The results were compared according to the type of functional structure of the units (autonomous or integrated). We performed a cross sectional, descriptive study through postal survey. The survey contained the following items: type of unit, surgical procedures, selection criteria, preoperative assessment and management, and qualitative and quantitative indexes of the activity performed in 2000. A total of 123 units were included with a response rate of 39%. The selection criteria showed a high degree of consensus. The outpatient anesthesia clinic was used for preoperative assessment by 97.9% of the units. Most units routinely requested preoperative tests (hemostasis and hemogram by 89%; biochemical parameters by 72.9%) and to a lesser extent chest X-ray (33.3%) and electrocardiogram (35.4%). The introduction of procedures for the management of coexisting diseases was scarce (25-64.6%). Units using the outpatient anesthesia clinic in all patients had a lower cancellation rate (1.5% vs 4.4%). Autonomous units were significantly more likely to accept patients with high surgical-anesthetic risk than integrated units. Autonomous units also showed a significantly lower number of admissions (1.2% vs 1.9%, p = 0.003), mean stay (240 min vs 367 min, p = 0.002), and recovery time (150 min vs 212 min, p = 0.001) than integrated units. No statistically significant differences were found in the remaining parameters. Scientifically based protocols for patient selection, preoperative assessment and perioperative management of distinct processes and for the rational use of laboratory tests should be more widely used. The need for an outpatient anesthesia clinic for preoperative assessment was notable. The results of our survey indicate that better results in performance indexes are achieved in autonomous ambulatory surgery units than in integrated units. Given the possibility of defining and validating quality standards, further multicenter studies should be performed.

Solid waste management in primary healthcare centers: application of a facilitation tool 1

PubMed Central

Moreira, Ana Maria Maniero; Günther, Wanda Maria Risso

2016-01-01

Abstract Objectives: to propose a tool to facilitate diagnosis, formulation and evaluation of the Waste Management Plan in Primary Healthcare Centers and to present the results of the application in four selected units. Method: descriptive research, covering the stages of formulation /application of the proposed instrument and the evaluation of waste management performance at the units. Results: the tool consists in five forms; specific indicators of waste generation for outpatients healthcare units were proposed, and performance indicators that give scores for compliance with current legislation. In the studied units it is generated common waste (52-60%), infectious-sharps (31-42%) and recyclable (5-17%). The average rates of generation are: 0,09kg of total waste/outpatient assistance and 0,09kg of infectious-sharps waste/outpatient procedure. The compliance with regulations, initially 26-30%, then reached 30-38% a year later. Conclusion: the tool showed to be easy to use, bypassing the existence of a complex range of existing regulatory requirements, allowed to identify non-conformities, pointed out corrective measures and evaluated the performance of waste management. In this sense, it contributes to decision making and management practices relating to waste, tasks usually assigned to nurses. It is recommended that the tool be applied in similar healthcare units for comparative studies, and implementation of necessary adaptations for other medical services. PMID:27556874

An Ergonomic Evaluation of the Extravehicular Mobility Unit (EMU) Space Suit Hard Upper Torso (HUT) Size Effect on Metabolic, Mobility, and Strength Performance

NASA Technical Reports Server (NTRS)

Reid, Christopher; Harvill, Lauren; England, Scott; Young, Karen; Norcross, Jason; Rajulu, Sudhakar

2014-01-01

The objective of this project was to assess the performance differences between a nominally sized Extravehicular Mobility Unit (EMU) space suit and a nominal +1 (plus) sized EMU. Method: This study evaluated suit size conditions by using metabolic cost, arm mobility, and arm strength as performance metrics. Results: Differences between the suit sizes were found only in shoulder extension strength being 15.8% greater for the plus size. Discussion: While this study was able to identify motions and activities that were considered to be practically or statistically different, it does not signify that use of a plus sized suit should be prohibited. Further testing would be required that either pertained to a particular mission critical task or better simulates a microgravity environment that the EMU suit was designed to work in.

Status of the Boeing Dish Engine Critical Component Project

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brau, H.W.; Diver, R.B.; Nelving, H.

1999-01-08

The Boeing Company's Dish Engine Critical Component (DECC) project started in April of 1998. It is a continuation of a solar energy program started by McDonnell Douglas (now Boeing) and United Stirling of Sweden in the mid 1980s. The overall objectives, schedule, and status of this project are presented in this paper. The hardware test configuration, hardware background, operation, and test plans are also discussed. A summary is given of the test data, which includes the daily power performance, generated energy, working-gas usage, mirror reflectivity, solar insolation, on-sun track time, generating time, and system availability. The system performance based uponmore » the present test data is compared to test data from the 1984/88 McDonnell Douglas/United Stirling AB/Southem California Edison test program. The test data shows that the present power, energy, and mirror performance is comparable to when the hardware was first manufactured 14 years ago.« less

Status of the Boeing Dish Engine Critical Component project

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stone, K.W.; Nelving, H.; Braun, H.W.

1999-07-01

The Boeing Company's Dish Engine Critical Component (DECC) project started in April of 1998. It is a continuation of a solar energy program started by McDonnel Douglas (now Boeing) and United Stirling of Sweden in the mid 1980s. The overall objectives, schedule, and status of this project are presented in this paper. The hardware test configuration, hardware background, operation, and test plans are also discussed. A summary is given of the test data, which includes the daily power performance, generated energy, working-gas usage, mirror reflectivity, solar insolation, on-sun track time. Generating time, and system availability. The system performance based uponmore » the present test data is compared to test data from the 1984/88 McDonnel Douglas/United Stirling AB/Southern California Edison test program. The test data shows that the present power, energy, and mirror performance is comparable to when the hardware was first manufactured 14 years ago.« less

ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT: UTC FUEL CELLS' PC25C POWER PLANT - GAS PROCESSING UNIT PERFORMANCE FOR ANAEROBIC DIGESTER GAS

EPA Science Inventory

Under EPA’s Environmental Technology Verification program, which provides objective and scientific third party analysis of new technology that can benefit the environment, a combined heat and power system based on the UTC Fuel Cell's PC25C Fuel Cell Power Plant was evaluated. The...

An Introduction to Logic Control Systems for the Behavioral Scientist, Part I, Text.

ERIC Educational Resources Information Center

Larsen, Lawrence A.

This programed instruction course gives a basic introduction to solid state programing equipment. Course objectives include giving the student (1) a working knowledge of the various types of units used in building digital logic control systems and (2) an idea of how they interconnect to perform different functions. The course has no prerequisites…

MODELING ASSESSMENT OF THE IMPACT OF NITROGEN OXIDES EMISSION REDUCTIONS ON OZONE AIR QUALITY IN THE EASTERN UNITED STATES: OFFSETTING INCREASES IN ENERGY USE

EPA Science Inventory

The objective of this study is to examine changes in ambient ozone concentrations estimated by a photochemical air quality model in response to the NOx emission reductions imposed on the utility sector. To accomplish this task, CMAQ air quality model simulations were performe...

Welcome to Lotus 1-2-3 Advanced. Learning Activity Packets.

ERIC Educational Resources Information Center

Mills, Steven; And Others

This learning activity packet (LAP) contains five self-paced study lessons that allow students to study advanced concepts of Lotus 1-2-3 at their own pace. The lessons used in the LAP are organized in the following way: lesson name, lesson number, objectives, completion standard, performance standard, required materials, unit test, and exercises.…

Welcome to Lotus 1-2-3. Learning Activity Packets.

ERIC Educational Resources Information Center

Mills, Steven; And Others

This learning activity packet (LAP) contains 11 self-paced study lessons that allow students to proceed along a 36-hour course of study for Lotus 1-2-3 at their own pace. The lessons are organized in the following way: objectives, completion and performance standards, a list of required materials, unit test, and exercises (applications of the…

Integrated planning for United Action in Phase Zero

DTIC Science & Technology

2007-05-24

Allocations by Country Category and Objective .............. 24 Figure 9 - USAID Funtional Bureau DCHA Organization...interagency activities are performed to dissuade or deter potential adversaries and to assure or solidify relationships with friends and allies. They...Shaping Operations, it must be recognized that a cluster of capabilities are described as central for both and found in each. The relationship

Dip Process Thermal Barrier Coating for Superalloys.

DTIC Science & Technology

1982-02-02

Washington DC 20332 Attention: Captain Steven G. Wax Program Manager ’. ~ Electronic and Material Sciences Contract F49630-81 - K -0009 𔃺 SRI Project...81- K -0009 9. PERFORMING ORGANIZATION NAME AND ADDRESS 10. PROGRAM ELEMENT. PROJECT. TASK SRI International AREA WORK UNIT NUMBERS 333 Ravenswood...A. Background ........ 0...................0................... B . Objectives ............ . ................ .............. 2 C. Sumry of Work: Year

Welcome to dBase III Plus. Learning Activity Packets.

ERIC Educational Resources Information Center

Mills, Steven; And Others

This learning activity packet (LAP) contains nine self-paced study lessons that allow students to proceed along a a 43-hour course of study for dBase III Plus at their own pace. The lessons are organized in the following way: objectives, completion standard, performance standard, a list of required materials, unit test, and exercises (applications…

Associative memory in aging: the effect of unitization on source memory.

PubMed

Bastin, Christine; Diana, Rachel A; Simon, Jessica; Collette, Fabienne; Yonelinas, Andrew P; Salmon, Eric

2013-03-01

In normal aging, memory for associations declines more than memory for individual items. Unitization is an encoding process defined by creation of a new single entity to represent a new arbitrary association. The current study tested the hypothesis that age-related differences in associative memory can be reduced by encoding instructions that promote unitization. In two experiments, groups of 20 young and 20 older participants learned new associations between a word and a background color under two conditions. In the item detail condition, they had to imagine that the item is the same color as the background-an instruction promoting unitization of the associations. In the context detail condition, which did not promote unitization, they had to imagine that the item interacted with another colored object. At test, they had to retrieve the color that was associated with each word (source memory). In both experiments, the results showed an age-related decrement in source memory performance in the context detail but not in the item detail condition. Moreover, Experiment 2 examined receiver operating characteristics in older participants and indicated that familiarity contributed more to source memory performance in the item detail than in the context detail condition. These findings suggest that unitization of new associations can overcome the associative memory deficit observed in aging, at least for item-color associations.

Improving Diaper Performance for Extremely Low-Birth-Weight Infants.

PubMed

Sanchez, Veronica; Maladen-Percy, Michelle; Gustin, Jennifer; Tally, Amy; Gibb, Roger; Ogle, Julie; Kenneally, Dianna C; Carr, Andrew N

2018-06-01

Extremely low-birth-weight (ELBW) infants face significant diapering challenges compared with their full-term peers, due to immature musculature, nervous system, and skin development. Advances in medical care has increased an ELBW infant's rate of survival, which creates a growing need for diapers to better serve these infants. Aim of research. The objective of this study was to identify and confirm the requirements for optimal diaper performance from the neonatal intensive care unit nurses' perspective, as well as to assess in-hospital performance to determine if new features improved key developmental care parameters. Two surveys were shared among nurses to address study objectives. Study 1 (N = 151) was designed for neonatal intensive care unit nurses to identify key requirements for ELBW diapers and rate the performance of existing ELBW diapers. Study 2 (N = 99) assessed in-hospital performance of the test diaper compared with the usual diaper, under normal usage conditions. Findings/results. The majority of nurses agreed that ELBW diapers must fit appropriately between the legs so that hips and legs are not spread apart and that ELBW diapers need to be flexible between the legs for positioning. Of the nurses-infant pair responses, 93% ( P < .0001) preferred the test ELBW diaper over their usual diaper. Findings suggest that nurses should be included in the product design process to ensure both their needs and the needs of an infant are being met. Nurses are considering how diaper features may affect both acute and long-term medical outcomes, and this information provides necessary guidance to diaper manufacturers and designers when developing better-performing diapers.

Effects of interactive instructional techniques in a web-based peripheral nervous system component for human anatomy.

PubMed

Allen, Edwin B; Walls, Richard T; Reilly, Frank D

2008-02-01

This study investigated the effects of interactive instructional techniques in a web-based peripheral nervous system (PNS) component of a first year medical school human anatomy course. Existing data from 9 years of instruction involving 856 students were used to determine (1) the effect of web-based interactive instructional techniques on written exam item performance and (2) differences between student opinions of the benefit level of five different types of interactive learning objects used. The interactive learning objects included Patient Case studies, review Games, Simulated Interactive Patients (SIP), Flashcards, and unit Quizzes. Exam item analysis scores were found to be significantly higher (p < 0.05) for students receiving the instructional treatment incorporating the web-based interactive learning objects than for students not receiving this treatment. Questionnaires using a five-point Likert scale were analysed to determine student opinion ratings of the interactive learning objects. Students reported favorably on the benefit level of all learning objects. Students rated the benefit level of the Simulated Interactive Patients (SIP) highest, and this rating was significantly higher (p < 0.05) than all other learning objects. This study suggests that web-based interactive instructional techniques improve student exam performance. Students indicated a strong acceptance of Simulated Interactive Patient learning objects.

Transit car demonstration test program on the roll dynamics unit. Volume 2. Demonstration of a transit car performance test on the roll dynamic unit. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Arnold, G.; Nelson, S.; Cooperrider, N.K.

1982-02-11

This report, Volume II, contains the results, conclusions, and recommendations of the first performance test of a transit care on the RDU. This report is limited to performance tests. The objective is to identify advantages and disadvantages of performance testing on the rollers of the RDU as highlighted by the SOAC test. The report involved separate testing, done by TTC personnel, in such traditional performance areas of transit vehicle operation ass traction, acceleration/deceleration, energy consumption, and spin/slide performance. The results of the successful performance test of a transit car on a roller unit is presented and the advantages of thismore » method of testing is discussed. Acceleration, deceleration, spin/slide, and power consumption tests, although of limited scope in comparison to the track tests performed on the same transit car, did show the feasibility of roller testing. It is concluded that the RDU is most suited for developmental testing of transit car systems particularly for power consumption and for cars with non-standard wheel gage. Tests should be of such scope as to justify the cost of car setup on the RDU. The following two test are recommended: (1) a power consumption study for a standard/non-standard gage transit car which investigates methods of reducing power consumption and (2) a non-standard gage full performance test.« less

Multi-objective optimization in systematic conservation planning and the representation of genetic variability among populations.

PubMed

Schlottfeldt, S; Walter, M E M T; Carvalho, A C P L F; Soares, T N; Telles, M P C; Loyola, R D; Diniz-Filho, J A F

2015-06-18

Biodiversity crises have led scientists to develop strategies for achieving conservation goals. The underlying principle of these strategies lies in systematic conservation planning (SCP), in which there are at least 2 conflicting objectives, making it a good candidate for multi-objective optimization. Although SCP is typically applied at the species level (or hierarchically higher), it can be used at lower hierarchical levels, such as using alleles as basic units for analysis, for conservation genetics. Here, we propose a method of SCP using a multi-objective approach. We used non-dominated sorting genetic algorithm II in order to identify the smallest set of local populations of Dipteryx alata (baru) (a Brazilian Cerrado species) for conservation, representing the known genetic diversity and using allele frequency information associated with heterozygosity and Hardy-Weinberg equilibrium. We worked in 3 variations for the problem. First, we reproduced a previous experiment, but using a multi-objective approach. We found that the smallest set of populations needed to represent all alleles under study was 7, corroborating the results of the previous study, but with more distinct solutions. In the 2nd and 3rd variations, we performed simultaneous optimization of 4 and 5 objectives, respectively. We found similar but refined results for 7 populations, and a larger portfolio considering intra-specific diversity and persistence with populations ranging from 8-22. This is the first study to apply multi-objective algorithms to an SCP problem using alleles at the population level as basic units for analysis.

Simulation of pipeline in the area of the underwater crossing

NASA Astrophysics Data System (ADS)

Burkov, P.; Chernyavskiy, D.; Burkova, S.; Konan, E. C.

2014-08-01

The article studies stress-strain behavior of the main oil-pipeline section Alexandrovskoye-Anzhero-Sudzhensk using software system Ansys. This method of examination and assessment of technical conditions of objects of pipeline transport studies the objects and the processes that affect the technical condition of these facilities, including the research on the basis of computer simulation. Such approach allows to develop the theory, methods of calculations and designing of objects of pipeline transport, units and parts of machines, regardless of their industry and destination with a view to improve the existing constructions and create new structures, machines of high performance, durability and reliability, maintainability, low material capacity and cost, which have competitiveness on the world market.

Corrective Action Decision Document for Corrective Action Unit 340: Pesticide Release sites, Nevada Test Site, Nevada

DOE Office of Scientific and Technical Information (OSTI.GOV)

DOE /NV

This Corrective Action Decision Document has been prepared for Corrective Action Unit 340, the NTS Pesticide Release Sites, in accordance with the Federal Facility Agreement and Consent Order of 1996 (FFACO, 1996). Corrective Action Unit 340 is located at the Nevada Test Site, Nevada, and is comprised of the following Corrective Action Sites: 23-21-01, Area 23 Quonset Hut 800 Pesticide Release Ditch; 23-18-03, Area 23 Skid Huts Pesticide Storage; and 15-18-02, Area 15 Quonset Hut 15-11 Pesticide Storage. The purpose of this Corrective Action Decision Document is to identify and provide a rationale for the selection of a recommended correctivemore » action alternative for each Corrective Action Site. The scope of this Corrective Action Decision Document consists of the following tasks: Develop corrective action objectives; Identify corrective action alternative screening criteria; Develop corrective action alternatives; Perform detailed and comparative evaluations of the corrective action alternatives in relation to the corrective action objectives and screening criteria; and Recommend and justify a preferred corrective action alternative for each Corrective Action Site.« less

Progressive Failure of a Unidirectional Fiber-Reinforced Composite Using the Method of Cells: Discretization Objective Computational Results

NASA Technical Reports Server (NTRS)

Pineda, Evan J.; Bednarcyk, Brett A.; Waas, Anthony M.; Arnold, Steven M.

2012-01-01

The smeared crack band theory is implemented within the generalized method of cells and high-fidelity generalized method of cells micromechanics models to capture progressive failure within the constituents of a composite material while retaining objectivity with respect to the size of the discretization elements used in the model. An repeating unit cell containing 13 randomly arranged fibers is modeled and subjected to a combination of transverse tension/compression and transverse shear loading. The implementation is verified against experimental data (where available), and an equivalent finite element model utilizing the same implementation of the crack band theory. To evaluate the performance of the crack band theory within a repeating unit cell that is more amenable to a multiscale implementation, a single fiber is modeled with generalized method of cells and high-fidelity generalized method of cells using a relatively coarse subcell mesh which is subjected to the same loading scenarios as the multiple fiber repeating unit cell. The generalized method of cells and high-fidelity generalized method of cells models are validated against a very refined finite element model.

Next-Generation Maneuvering System with Control-Moment Gyroscopes for Extravehicular Activities Near Low-Gravity Objects

NASA Technical Reports Server (NTRS)

Carpenter, Michele; Jackson, Kimberly; Cohanim, Babak; Duda, Kevin R.; Rize, Jared; Dopart, Celena; Hoffman, Jeffrey; Curiel, Pedro; Studak, Joseph; Ponica, Dina;

An obligation to provide abortion services: what happens when physicians refuse?

PubMed

Meyers, C; Woods, R D

1996-04-01

Access to abortion services in the United States continues to decline. It does so not because of significant changes in legislation or court rulings but because fewer and fewer physicians wish to perform abortions and because most states now have "conscientious objection" legislation that makes it easy for physicians to refuse to do so. We argue in this paper that physicians have an obligation to perform all socially sanctioned medical services, including abortions, and thus that the burden of justification lies upon those who wish to be excused from that obligation. That is, such persons should have to show how requiring them to perform abortions would represent a serious threat to their fundamental moral or religious beliefs. We use current California law as an example of legislation that does not take physicians' obligations into account and thus allows them too easily to declare conscientious objection.

An obligation to provide abortion services: what happens when physicians refuse?

PubMed Central

Meyers, C; Woods, R D

1996-01-01

Access to abortion services in the United States continues to decline. It does so not because of significant changes in legislation or court rulings but because fewer and fewer physicians wish to perform abortions and because most states now have "conscientious objection" legislation that makes it easy for physicians to refuse to do so. We argue in this paper that physicians have an obligation to perform all socially sanctioned medical services, including abortions, and thus that the burden of justification lies upon those who wish to be excused from that obligation. That is, such persons should have to show how requiring them to perform abortions would represent a serious threat to their fundamental moral or religious beliefs. We use current California law as an example of legislation that does not take physicians' obligations into account and thus allows them too easily to declare conscientious objection. PMID:8731539

Trends in cardiac catheterization laboratories in the United States.

PubMed

Sheldon, W C

2001-05-01

The Society for Cardiac Angiography and Interventions has periodically published a Directory of Cardiac Catheterization Laboratories in the United States. All known catheterization laboratories are surveyed and certain operational characteristics are queried. These surveys, in 1983, 1987, 1993, 1995 and 1998, have demonstrated a 2.5 fold increase in cardiac catheterization laboratories since 1983, corresponding increases in numbers of physicians that perform procedures, and in the numbers of procedures performed, reflecting advances in cardiovascular medicine and technology. These surveys have also documented the evolution of interventional techniques, and a shift away from film based imaging, to digitally based methods. These data provide a substrate for consideration of national cardiovascular objectives and planning of future resource allocation by cardiovascular physicians and their colleagues. Copyright 2001 Wiley-Liss, Inc.

Classification of Movement of People with Parkinsons Disease Using Wearable Inertial Movement Units and Machine Learning.

PubMed

Ireland, David; Wang, Ziwei; Lamont, Robyn; Liddle, Jacki

2016-01-01

In this work, inertial movement units were placed on people with Parkinsons disease (PwPD) who subsequently performed a standard test of walking endurance (six-minute walk test - 6MWT). Five devices were placed on each the limbs and small of the back. These devices captured the acceleration and rotational motion while the person walked as far as they can in six minutes. The wearable devices can objectively indicate the pattern and rhythmicity of limb and body movements. It is possible that this data, when subject to machine learning could provide additional objective measures that may support clinical observations related to the quality of movement. The aim of this work is two fold. First, to identify the most useful features of the captured signals; second, to identify the accuracy of using these features to predict the severity of PD as measured by standard clinical assessment.

Special Analysis for the Disposal of the Consolidated Edison Uranium Solidification Project Waste Stream at the Area 5 Radioactive Waste Management Site, Nevada National Security Site, Nye County, Nevada

DOE Office of Scientific and Technical Information (OSTI.GOV)

NSTec Environmental Management

2013-01-31

The purpose of this Special Analysis (SA) is to determine if the Oak Ridge (OR) Consolidated Edison Uranium Solidification Project (CEUSP) uranium-233 (233U) waste stream (DRTK000000050, Revision 0) is acceptable for shallow land burial (SLB) at the Area 5 Radioactive Waste Management Site (RWMS) on the Nevada National Security Site (NNSS). The CEUSP 233U waste stream requires a special analysis because the concentrations of thorium-229 (229Th), 230Th, 232U, 233U, and 234U exceeded their NNSS Waste Acceptance Criteria action levels. The acceptability of the waste stream is evaluated by determining if performance assessment (PA) modeling provides a reasonable expectation that SLBmore » disposal is protective of human health and the environment. The CEUSP 233U waste stream is a long-lived waste with unique radiological hazards. The SA evaluates the long-term acceptability of the CEUSP 233U waste stream for near-surface disposal as a two tier process. The first tier, which is the usual SA process, uses the approved probabilistic PA model to determine if there is a reasonable expectation that disposal of the CEUSP 233U waste stream can meet the performance objectives of U.S. Department of Energy Manual DOE M 435.1-1, “Radioactive Waste Management,” for a period of 1,000 years (y) after closure. The second tier addresses the acceptability of the OR CEUSP 233U waste stream for near-surface disposal by evaluating long-term site stability and security, by performing extended (i.e., 10,000 and 60,000 y) modeling analyses, and by evaluating the effect of containers and the depth of burial on performance. Tier I results indicate that there is a reasonable expectation of compliance with all performance objectives if the OR CEUSP 233U waste stream is disposed in the Area 5 RWMS SLB disposal units. The maximum mean and 95th percentile PA results are all less than the performance objective for 1,000 y. Monte Carlo uncertainty analysis indicates that there is a high likelihood of compliance with all performance objectives. Tier II results indicate that the long-term performance of the OR CEUSP 233U waste stream is protective of human health and the environment. The Area 5 RWMS is located in one of the least populated and most arid regions of the U.S. Site characterization data indicate that infiltration of precipitation below the plant root zone at 2.5 meters (8.2 feet) ceased 10,000 to 15,000 y ago. The site is not expected to have a groundwater pathway as long as the current arid climate persists. The national security mission of the NNSS and the location of the Area 5 RWMS within the Frenchman Flat Corrective Action Unit require that access controls and land use restrictions be maintained indefinitely. PA modeling results for 10,000 to 60,000 y also indicate that the OR CEUSP 233U waste stream is acceptable for near-surface disposal. The mean resident air pathway annual total effective dose (TED), the resident all-pathways annual TED, and the acute drilling TED are less than their performance objectives for 10,000 y after closure. The mean radon-222 (222Rn) flux density exceeds the performance objective at 4,200 y, but this is due to waste already disposed at the Area 5 RWMS and is only slightly affected by disposal of the CEUSP 233U. The peak resident all-pathways annual TED from CEUSP key radionuclides occurs at 48,000 y and is less than the 0.25 millisievert performance objective. Disposal of the OR CEUSP 233U waste stream in a typical SLB trench slightly increases PA results. Increasing the depth was found to eliminate any impacts of the OR CEUSP 233U waste stream. Containers could not be shown to have any significant impact on performance due to the long half-life of the waste stream and a lack of data for pitting corrosion rates of stainless steel in soil. The results of the SA indicate that all performance objectives can be met with disposal of the OR CEUSP 233U waste stream in the SLB units at the Area 5 RWMS. The long-term performance of the OR CEUSP 233U waste stream disposed in the near surface is protective of human health and the environment. The waste stream is recommended for disposal without conditions.« less

Applied Meteorology Unit (AMU)

NASA Technical Reports Server (NTRS)

Bauman, William; Crawford, Winifred; Barrett, Joe; Watson, Leela; Wheeler, Mark

2010-01-01

This report summarizes the Applied Meteorology Unit (AMU) activities for the first quarter of Fiscal Year 2010 (October - December 2009). A detailed project schedule is included in the Appendix. Included tasks are: (1) Peak Wind Tool for User Launch Commit Criteria (LCC), (2) Objective Lightning Probability Tool, Phase III, (3) Peak Wind Tool for General Forecasting, Phase II, (4) Upgrade Summer Severe Weather Tool in Meteorological Interactive Data Display System (MIDDS), (5) Advanced Regional Prediction System (ARPS) Data Analysis System (ADAS) Update and Maintainability, (5) Verify 12-km resolution North American Model (MesoNAM) Performance, and (5) Hybrid Single-Particle Lagrangian Integrated Trajectory (HYSPLIT) Graphical User Interface.

CRADA with United Solar Technologies and Pacific Northwest Laboratory (PNL-021): Thin film materialsfor low-cost high performance solar concentrators

NASA Astrophysics Data System (ADS)

Martin, P. M.; Affinito, J. D.; Gross, M. E.; Bennett, W. D.

1995-03-01

The objectives of this project were to develop and evaluate promising low-cost dielectric and polymer-protected thin-film reflective metal coatings to be applied to preformed continuously-curved solar reflector panels to enhance their solar reflectance, and to demonstrate protected solar reflective coatings on preformed solar concentrator panels. The opportunity for this project arose from a search by United Solar Technologies (UST) for organizations and facilities capable of applying reflective coatings to large preformed panels. PNL was identified as being uniquely qualified to participate in this collaborative project.

The Athena X-ray Integral Field Unit (X-IFU)

NASA Astrophysics Data System (ADS)

Pajot, F.; Barret, D.; Lam-Trong, T.; den Herder, J.-W.; Piro, L.; Cappi, M.; Huovelin, J.; Kelley, R.; Mas-Hesse, J. M.; Mitsuda, K.; Paltani, S.; Rauw, G.; Rozanska, A.; Wilms, J.; Barbera, M.; Douchin, F.; Geoffray, H.; den Hartog, R.; Kilbourne, C.; Le Du, M.; Macculi, C.; Mesnager, J.-M.; Peille, P.

2018-04-01

The X-ray Integral Field Unit (X-IFU) of the Advanced Telescope for High-ENergy Astrophysics (Athena) large-scale mission of ESA will provide spatially resolved high-resolution X-ray spectroscopy from 0.2 to 12 keV, with 5^' ' } pixels over a field of view of 5 arc minute equivalent diameter and a spectral resolution of 2.5 eV (FWHM) up to 7 keV. The core scientific objectives of Athena drive the main performance parameters of the X-IFU. We present the current reference configuration of the X-IFU, and the key issues driving the design of the instrument.

MEGARA: large pupil element tests and performance

NASA Astrophysics Data System (ADS)

Martínez-Delgado, I.; Sánchez-Blanco, E.; Pérez-Calpena, A.; García-Vargas, M. L.; Maldonado, X. M.; Gil de Paz, A.; Carrasco, E.; Gallego, J.; Iglesias-Páramo, J.; Sánchez-Moreno, F. M.

2016-07-01

MEGARA is a third generation spectrograph for the Spanish 10.4m telescope (GTC) providing two observing modes: a large central Integral Field Unit (IFU), called the Large Compact Bundle (LCB), covering a FOV of 12.5 × 11.3 arcsec2, and a Multi-Object Spectrograph (MOS) with a FOV of 3.5 × 3.5 arcmin2. MEGARA will observe the whole visible range from 3650A to 10000A allowing different spectral resolutions (low, medium and high) with R = 6000, 11000 and 18000 respectively. The dispersive elements are placed at the spectrograph pupil position in the path of the collimated beam and they are composed of a set of volume phase hologram gratings (VPHs) sandwiched between two flat windows and coupled in addition to two prisms in the case of the medium- and high-resolution units. We will describe the tests and setups developed to check the requirements of all units, as well as the obtained performance at laboratory

Electronics reliability fracture mechanics. Volume 1: Causes of failures of shop replaceable units and hybrid microcircuits

NASA Astrophysics Data System (ADS)

Kallis, J.; Buechler, D.; Erickson, J.; Westerhuyzen, D. V.; Strokes, R.

1992-05-01

This is the first of two volumes. The other volume (WL-TR-91-3119) is 'Fracture Mechanics'. The objective of the Electronics Reliability Fracture Mechanics (ERFM) program was to develop and demonstrate a life prediction technique for electronic assemblies, when subjected to environmental stress of vibration and thermal cycling, based upon the mechanical properties of the materials and packaging configurations which make up an electronic system. A detailed investigation was performed of the following two shop replaceable units (SRUs): Timing and Control Module (P/N 3562102) and Linear Regulator Module (P/N 3569800). The SRUs are in the Programmable Signal Processor (3137042) Line Replaceable Unit (LRU) of the Hughes AN/APG-63 Radar for the F-15 Aircraft.

An Objective Verification of the North American Mesoscale Model for Kennedy Space Center and Cape Canaveral Air Force Station

NASA Technical Reports Server (NTRS)

Bauman, William H., III

2010-01-01

The 45th Weather Squadron (45 WS) Launch Weather Officers use the 12-km resolution North American Mesoscale (NAM) model (MesoNAM) text and graphical product forecasts extensively to support launch weather operations. However, the actual performance of the model at Kennedy Space Center (KSC) and Cape Canaveral Air Force Station (CCAFS) has not been measured objectively. In order to have tangible evidence of model performance, the 45 WS tasked the Applied Meteorology Unit to conduct a detailed statistical analysis of model output compared to observed values. The model products are provided to the 45 WS by ACTA, Inc. and include hourly forecasts from 0 to 84 hours based on model initialization times of 00, 06, 12 and 18 UTC. The objective analysis compared the MesoNAM forecast winds, temperature and dew point, as well as the changes in these parameters over time, to the observed values from the sensors in the KSC/CCAFS wind tower network. Objective statistics will give the forecasters knowledge of the model's strength and weaknesses, which will result in improved forecasts for operations.

Developing Career Education; K-2 Instructional Units.

ERIC Educational Resources Information Center

Nebraska State Dept. of Education, Lincoln. Div. of Vocational Education.

The guide presents instructional units aimed at developing career education for grades K-2. Each unit provides detailed objectives, activities, resources, and evaluations, and in some units the objectives are further detailed in relationship to the following subjects: mathematics, language arts, social studies, guidance, music, physical education,…

Alcohol and Homicide in Russia and the United States: A Comparative Analysis*

PubMed Central

Landberg, Jonas; Norström, Thor

2011-01-01

Objective: The object of this study was to perform a comparative analysis of the aggregate relationship between alcohol and homicide in Russia and in the United States. The comparison was based on the magnitude of the alcohol effect, the alcohol attributable fraction (AAF), and the degree to which total consumption could account for trends in homicide. Method: We analyzed total and sex-specific homicide rates for the age groups 15–64 years, 15–34 years, and 35–64 years. The study period was 1959–1998 for Russia and 1950–2002 for the United States. For the United States, alcohol consumption was gauged by sales of alcohol; for Russia, estimated unrecorded consumption was included as well. The data were analyzed through autoregressive integrated moving average (ARIMA) modeling. Results: The results show that, for Russia as well as for the United States, a 1 -L increase in consumption was associated with an increase in homicides of about 10%, although the absolute effect was markedly larger in Russia because of differences in homicide rates. The AAF estimates suggested that 73% and 57% of the homicides would be attributable to alcohol in Russia and in the United States, respectively. Most of the temporal variation in the Russian homicide rate could be accounted for by the trend in drinking, whereas the U.S. trend in total alcohol consumption had a more limited ability to predict the trend in homicides. Conclusions: We conclude that the role of alcohol in homicide seems to be larger in Russia than in the United States. PMID:21906499

Evaluation of Erosion Potential of Estuarine Sediments in NY/NJ Harbor (Impact of In-Situ Stabilization on the Remediation of Soft Sediments - A preamble to Erosion Testing and Evaluation)

DOT National Transportation Integrated Search

2011-09-01

The primary objective of the project are to perform a review of existing in-situ techniques of sediment erosion potential evaluation in contaminated "superfund" sites in the United States and those from Europe and Japan and the applicability of soft ...

Defect Depth Measurement Using White Light Interferometry

NASA Technical Reports Server (NTRS)

Parker, Don; Starr, Stan

2009-01-01

The objectives of the White Light Interferometry project are the following: (1) Demonstrate a small hand-held instrument capable of performing inspections of identified defects on Orbiter outer pane window surfaces. (2) Build and field-test a prototype device using miniaturized optical components. (3) Modify the instrument based on field testing and begin the conversion of the unit to become a certified shop-aid.

A Java application for tissue section image analysis.

PubMed

Kamalov, R; Guillaud, M; Haskins, D; Harrison, A; Kemp, R; Chiu, D; Follen, M; MacAulay, C

2005-02-01

The medical industry has taken advantage of Java and Java technologies over the past few years, in large part due to the language's platform-independence and object-oriented structure. As such, Java provides powerful and effective tools for developing tissue section analysis software. The background and execution of this development are discussed in this publication. Object-oriented structure allows for the creation of "Slide", "Unit", and "Cell" objects to simulate the corresponding real-world objects. Different functions may then be created to perform various tasks on these objects, thus facilitating the development of the software package as a whole. At the current time, substantial parts of the initially planned functionality have been implemented. Getafics 1.0 is fully operational and currently supports a variety of research projects; however, there are certain features of the software that currently introduce unnecessary complexity and inefficiency. In the future, we hope to include features that obviate these problems.

Visual integration enhances associative memory equally for young and older adults without reducing hippocampal encoding activation.

PubMed

Memel, Molly; Ryan, Lee

2017-06-01

The ability to remember associations between previously unrelated pieces of information is often impaired in older adults (Naveh-Benjamin, 2000). Unitization, the process of creating a perceptually or semantically integrated representation that includes both items in an associative pair, attenuates age-related associative deficits (Bastin et al., 2013; Ahmad et al., 2015; Zheng et al., 2015). Compared to non-unitized pairs, unitized pairs may rely less on hippocampally-mediated binding associated with recollection, and more on familiarity-based processes mediated by perirhinal cortex (PRC) and parahippocampal cortex (PHC). While unitization of verbal materials improves associative memory in older adults, less is known about the impact of visual integration. The present study determined whether visual integration improves associative memory in older adults by minimizing the need for hippocampal (HC) recruitment and shifting encoding to non-hippocampal medial temporal structures, such as the PRC and PHC. Young and older adults were presented with a series of objects paired with naturalistic scenes while undergoing fMRI scanning, and were later given an associative memory test. Visual integration was varied by presenting the object either next to the scene (Separated condition) or visually integrated within the scene (Combined condition). Visual integration improved associative memory among young and older adults to a similar degree by increasing the hit rate for intact pairs, but without increasing false alarms for recombined pairs, suggesting enhanced recollection rather than increased reliance on familiarity. Also contrary to expectations, visual integration resulted in increased hippocampal activation in both age groups, along with increases in PRC and PHC activation. Activation in all three MTL regions predicted discrimination performance during the Separated condition in young adults, while only a marginal relationship between PRC activation and performance was observed during the Combined condition. Older adults showed less overall activation in MTL regions compared to young adults, and associative memory performance was most strongly predicted by prefrontal, rather than MTL, activation. We suggest that visual integration benefits both young and older adults similarly, and provides a special case of unitization that may be mediated by recollective, rather than familiarity-based encoding processes. Copyright © 2017 Elsevier Ltd. All rights reserved.

Developing Career Education; Grades 3-6 Instructional Units.

ERIC Educational Resources Information Center

Nebraska State Dept. of Education, Lincoln. Div. of Vocational Education.

The guide presents instructional units aimed at developing career education for grades 3-6. Each unit provides detailed objectives, activities, resources, and evaluations, and in some units the objectives are further detailed in relationship to the following subjects: mathematics, language arts, social studies, guidance, music, physical education,…

Flow Visualization of Aircraft in Flight by Means of Background Oriented Schlieren Using Celestial Objects

NASA Technical Reports Server (NTRS)

Hill, Michael A.; Haering, Edward A., Jr.

2017-01-01

The Background Oriented Schlieren using Celestial Objects series of flights was undertaken in the spring of 2016 at National Aeronautics and Space Administration Armstrong Flight Research Center to further develop and improve a flow visualization technique which can be performed from the ground upon flying aircraft. Improved hardware and imaging techniques from previous schlieren tests were investigated. A United States Air Force T-38C and NASA B200 King Air aircraft were imaged eclipsing the sun at ranges varying from 2 to 6 nautical miles, at subsonic and supersonic speeds.

Recollection and unitization in associating actors with extrinsic and intrinsic motions.

PubMed

Kersten, Alan W; Earles, Julie L; Berger, Johanna D

2015-04-01

Four experiments provide evidence for a distinction between 2 different kinds of motion representations. Extrinsic motions involve the path of an object with respect to an external frame of reference. Intrinsic motions involve the relative motions of the parts of an object. This research suggests that intrinsic motions are represented conjointly with information about the identities of the actors who perform them, whereas extrinsic motions are represented separately from identity information. Experiment 1 demonstrated that participants remembered which actor had performed a particular intrinsic motion better than they remembered which actor had performed a particular extrinsic motion. Experiment 2 replicated this effect with incidental encoding of actor information, suggesting that encoding intrinsic motions leads one to automatically encode identity information. The results of Experiments 3 and 4 were fit by Yonelinas's (1999) source-memory model to quantify the contributions of familiarity and recollection to memory for the actors who carried out the intrinsic and extrinsic motions. Successful performance with extrinsic motion items in Experiment 3 required participants to remember in which scene contexts an actor had appeared, whereas successful performance in Experiment 4 required participants to remember the exact path taken by an actor in each scene. In both experiments, discrimination of old and new combinations of actors and extrinsic motions relied strongly on recollection, suggesting independent but associated representations of actors and extrinsic motions. In contrast, participants discriminated old and new combinations of actors and intrinsic motions primarily on the basis of familiarity, suggesting unitized representations of actors and intrinsic motions. (c) 2015 APA, all rights reserved).

Bindings in working memory: The role of object-based attention.

PubMed

Gao, Zaifeng; Wu, Fan; Qiu, Fangfang; He, Kaifeng; Yang, Yue; Shen, Mowei

2017-02-01

Over the past decade, it has been debated whether retaining bindings in working memory (WM) requires more attention than retaining constituent features, focusing on domain-general attention and space-based attention. Recently, we proposed that retaining bindings in WM needs more object-based attention than retaining constituent features (Shen, Huang, & Gao, 2015, Journal of Experimental Psychology: Human Perception and Performance, doi: 10.1037/xhp0000018 ). However, only unitized visual bindings were examined; to establish the role of object-based attention in retaining bindings in WM, more emperical evidence is required. We tested 4 new bindings that had been suggested requiring no more attention than the constituent features in the WM maintenance phase: The two constituent features of binding were stored in different WM modules (cross-module binding, Experiment 1), from auditory and visual modalities (cross-modal binding, Experiment 2), or temporally (cross-time binding, Experiments 3) or spatially (cross-space binding, Experiments 4-6) separated. In the critical condition, we added a secondary object feature-report task during the delay interval of the change-detection task, such that the secondary task competed for object-based attention with the to-be-memorized stimuli. If more object-based attention is required for retaining bindings than for retaining constituent features, the secondary task should impair the binding performance to a larger degree relative to the performance of constituent features. Indeed, Experiments 1-6 consistently revealed a significantly larger impairment for bindings than for the constituent features, suggesting that object-based attention plays a pivotal role in retaining bindings in WM.

Neural Representations that Support Invariant Object Recognition

PubMed Central

Goris, Robbe L. T.; Op de Beeck, Hans P.

2008-01-01

Neural mechanisms underlying invariant behaviour such as object recognition are not well understood. For brain regions critical for object recognition, such as inferior temporal cortex (ITC), there is now ample evidence indicating that single cells code for many stimulus aspects, implying that only a moderate degree of invariance is present. However, recent theoretical and empirical work seems to suggest that integrating responses of multiple non-invariant units may produce invariant representations at population level. We provide an explicit test for the hypothesis that a linear read-out mechanism of a pool of units resembling ITC neurons may achieve invariant performance in an identification task. A linear classifier was trained to decode a particular value in a 2-D stimulus space using as input the response pattern across a population of units. Only one dimension was relevant for the task, and the stimulus location on the irrelevant dimension (ID) was kept constant during training. In a series of identification tests, the stimulus location on the relevant dimension (RD) and ID was manipulated, yielding estimates for both the level of sensitivity and tolerance reached by the network. We studied the effects of several single-cell characteristics as well as population characteristics typically considered in the literature, but found little support for the hypothesis. While the classifier averages out effects of idiosyncratic tuning properties and inter-unit variability, its invariance is very much determined by the (hypothetical) ‘average’ neuron. Consequently, even at population level there exists a fundamental trade-off between selectivity and tolerance, and invariant behaviour does not emerge spontaneously. PMID:19242556

Material Modeling of Stony Meteorites for Mechanical Properties

NASA Astrophysics Data System (ADS)

Agrawal, P.

2016-12-01

To assess the threat posed by an asteroid entering Earth's atmosphere, one must predict if, when, and how it fragments during entry. A comprehensive understanding of the asteroid material properties is needed to achieve this objective. At present, the meteorite material found on earth are the only objects (other than synthetic meteorites) from an entering asteroid that can be used as representative material and be tested inside a laboratory setting. Due to limited number of meteorites available for testing it is difficult to develop a material model that can be purely based on statistics from the test data. Therefore, we are developing computational models to determine the effective material properties of stony meteorites and in turn deduce the properties of asteroids. The internal structure of meteorites are very complex. They consists of several minerals that include the silica based materials such as Olivine, Pyroxene, Feldspar that are found in terrestrial rocks, as well as Fe-Ni based minerals such as Kamacite, Troilite and Taenite that are unique to meteorites. Each of these minerals have different densities and mechanical properties. In addition, the meteorites have different phases that can be summarized as chondrules, metal and matrix. The meteorites have varying degree of porosity and pre-cracked structure. In order to account for diverse petrology of the meteorites a unique methodology is developed the form of unit cell model. The unit cell is representative volume that accounts for diverse minerals, porosity, and matrix composition inside a meteorite. All the minerals and phases inside these unit cells are randomly distributed. Several hundreds of Monte-Carlo simulations are performed to generate the effective mechanical properties such as Young's Modulus and Poisson's Ratio of the unit cell. Stress-strain curves as well as strength estimates are generated based on the unit cell models. These estimates will used as material models for full scale modeling of atmospheric entry for asteroids. Terrestrial analogs such as Basalt and Gabbro are being used to validate the unit cell methodology. Structural tests are also being performed on some of the meteorites including Tamdakht and Mbole to validate the predictions from unit cell models.

Differences in Self-Reported Physical Limitation Among Older Women and Men in Ismailia, Egypt

PubMed Central

2012-01-01

Objectives. This study explores the reasons for gender differences in self-reported physical limitation among older adults in Ismailia, Egypt. Method. 435 women and 448 men, 50 years and older in Ismailia, Egypt, participated in a social survey and tests of physical performance. Ordered logit models were estimated to compare unadjusted gender differences in reported disability with these differences adjusted sequentially for (a) age and objective measures of physical performance, (b) self-reported morbidities and health care use, and (c) social and economic attributes. Results. Compared with men, women more often reported higher levels of limitation in activities of daily living (ADLs), upper-extremity range of motion (ROM), and lower-extremity gross mobility (GM). Adjusting for age and objective measures of physical performance, women and men had similar odds of self-reporting difficulty with ADLs. With sequential adjustments for the remaining variables, women maintained significantly higher odds of self-reported difficulty with upper-extremity ROM and lower-extremity GM. Discussion. Cross-culturally, gender differences in self-reported disability may arise from objective and subjective perceptions of disability. Collectively, these results and those from prior studies in Bangladesh and the United States suggest that gender gaps in self-reported physical limitation may be associated with the degree of gender equality in society. PMID:22929399

STS-71, Space Shuttle Mission Report

NASA Technical Reports Server (NTRS)

Frike, Robert W., Jr.

1995-01-01

The STS-71 Space Shuttle Program Mission Report summarizes the Payload activities and provides detailed data on the Orbiter, External Tank (ET), Solid Rocket Booster (SRB), Reusable Solid Rocket Motor (RSRM), and the Space Shuttle main engine (SSME) systems performance. STS-71 is the 100th United States manned space flight, the sixty-ninth Space Shuttle flight, the forty-fourth flight since the return-to-flight, the fourteenth flight of the OV-104 Orbiter vehicle Atlantis, and the first joint United States (U.S.)-Russian docking mission since 1975. In addition to the OV-104 Orbiter vehicle, the flight vehicle consisted of an ET that was designated ET-70; three SSMEs that were designated 2028, 2034, and 2032 in positions 1, 2, and 3, respectively; and two SRBs that were designated Bl-072. The RSRMs that were an integral part of the SRBs were designated 360L045A for the left SRB and 360W045B for the right SRB. The STS-71 mission was planned as a 1 0-day plus 1-day-extension mission plus 2 additional days for contingency operations and weather avoidance. The primary objectives of this flight were to rendezvous and dock with the Mir Space Station and perform on-orbit joint U.S.-Russian life sciences investigations, logistical resupply of the Mir Space Station, return of the United States astronaut flying on the Mir, the replacement of the Mir-18 crew with the two-cosmonaut Mir-19 crew, and the return of the Mir-18 crew to Earth. The secondary objectives were to perform the requirements of the IMAX Camera and the Shuttle Amateur Radio experiment-2 (SAREX-2).

Benchmarking in pathology: development of a benchmarking complexity unit and associated key performance indicators.

PubMed

Neil, Amanda; Pfeffer, Sally; Burnett, Leslie

2013-01-01

This paper details the development of a new type of pathology laboratory productivity unit, the benchmarking complexity unit (BCU). The BCU provides a comparative index of laboratory efficiency, regardless of test mix. It also enables estimation of a measure of how much complex pathology a laboratory performs, and the identification of peer organisations for the purposes of comparison and benchmarking. The BCU is based on the theory that wage rates reflect productivity at the margin. A weighting factor for the ratio of medical to technical staff time was dynamically calculated based on actual participant site data. Given this weighting, a complexity value for each test, at each site, was calculated. The median complexity value (number of BCUs) for that test across all participating sites was taken as its complexity value for the Benchmarking in Pathology Program. The BCU allowed implementation of an unbiased comparison unit and test listing that was found to be a robust indicator of the relative complexity for each test. Employing the BCU data, a number of Key Performance Indicators (KPIs) were developed, including three that address comparative organisational complexity, analytical depth and performance efficiency, respectively. Peer groups were also established using the BCU combined with simple organisational and environmental metrics. The BCU has enabled productivity statistics to be compared between organisations. The BCU corrects for differences in test mix and workload complexity of different organisations and also allows for objective stratification into peer groups.

Determination of criteria weights in solving multi-criteria problems

NASA Astrophysics Data System (ADS)

Kasim, Maznah Mat

2014-12-01

A multi-criteria (MC) problem comprises of units to be analyzed under a set of evaluation criteria. Solving a MC problem is basically the process of finding the overall performance or overall quality of the units of analysis by using certain aggregation method. Based on these overall measures of each unit, a decision can be made whether to sort them, to select the best or to group them according to certain ranges. Prior to solving the MC problems, the weights of the related criteria have to be determined with the assumption that the weights represent the degree of importance or the degree of contribution towards the overall performance of the units. This paper presents two main approaches which are called as subjective and objective approaches, where the first one involves evaluator(s) while the latter approach depends on the intrinsic information contained in each criterion. The subjective and objective weights are defined if the criteria are assumed to be independent with each other, but if they are dependent, there is another type of weight, which is called as monotone measure weight or compound weights which represent degree of interaction among the criteria. The measure of individual weights or compound weights must be addressed in solving multi-criteria problems so that the solutions are more reliable since in the real world, evaluation criteria always come with different degree of importance or are dependent with each other. As the real MC problems have their own uniqueness, it is up to the decision maker(s) to decide which type of weights and which method are the most applicable ones for the problem under study.

Sheet Membrane Spacesuit Water Membrane Evaporator Thermal Test

NASA Technical Reports Server (NTRS)

Trevino, Luis A.; Bue, Grant C.

2009-01-01

For future lunar extravehicular activities (EVA), one method under consideration for rejecting crew and electronics heat involves evaporating water through a hydrophobic, porous Teflon(Registered Trademark) membrane. A Spacesuit Water Membrane Evaporator (SWME) prototype using this membrane was successfully tested by Ungar and Thomas (2001) with predicted performance matching test data well. The above referenced work laid the foundation for the design of a compact sheet membrane SWME development unit for use in the Constellation System Spacesuit Element Portable Life Support System (Vogel and et. al., ICES 2008). Major design objectives included minimizing mass, volume, and manufacturing complexity while rejecting a minimum of 810 watts of heat from water flowing through the SWME at 91 kg/hr with an inlet temperature of 291K. The design meeting these objectives consisted of three concentric cylindrical water channels interlaced with four water vapor channels. Two units were manufactured for the purpose of investigating manufacturing techniques and performing thermal testing. The extensive thermal test measured SWME heat rejection as a function of water inlet temperatures, water flow-rates, water absolute pressures, water impurities, and water vapor back-pressures. This paper presents the test results and subsequent analysis, which includes a comparison of SWME heat rejection measurements to pretest predictions. In addition, test measurements were taken such that an analysis of the commercial-off-the-shelf vapor pressure control valve could be performed.

PyMUS: Python-Based Simulation Software for Virtual Experiments on Motor Unit System

PubMed Central

Kim, Hojeong; Kim, Minjung

2018-01-01

We constructed a physiologically plausible computationally efficient model of a motor unit and developed simulation software that allows for integrative investigations of the input–output processing in the motor unit system. The model motor unit was first built by coupling the motoneuron model and muscle unit model to a simplified axon model. To build the motoneuron model, we used a recently reported two-compartment modeling approach that accurately captures the key cell-type-related electrical properties under both passive conditions (somatic input resistance, membrane time constant, and signal attenuation properties between the soma and the dendrites) and active conditions (rheobase current and afterhyperpolarization duration at the soma and plateau behavior at the dendrites). To construct the muscle unit, we used a recently developed muscle modeling approach that reflects the experimentally identified dependencies of muscle activation dynamics on isometric, isokinetic and dynamic variation in muscle length over a full range of stimulation frequencies. Then, we designed the simulation software based on the object-oriented programing paradigm and developed the software using open-source Python language to be fully operational using graphical user interfaces. Using the developed software, separate simulations could be performed for a single motoneuron, muscle unit and motor unit under a wide range of experimental input protocols, and a hierarchical analysis could be performed from a single channel to the entire system behavior. Our model motor unit and simulation software may represent efficient tools not only for researchers studying the neural control of force production from a cellular perspective but also for instructors and students in motor physiology classroom settings. PMID:29695959

PyMUS: Python-Based Simulation Software for Virtual Experiments on Motor Unit System.

PubMed

Kim, Hojeong; Kim, Minjung

2018-01-01

We constructed a physiologically plausible computationally efficient model of a motor unit and developed simulation software that allows for integrative investigations of the input-output processing in the motor unit system. The model motor unit was first built by coupling the motoneuron model and muscle unit model to a simplified axon model. To build the motoneuron model, we used a recently reported two-compartment modeling approach that accurately captures the key cell-type-related electrical properties under both passive conditions (somatic input resistance, membrane time constant, and signal attenuation properties between the soma and the dendrites) and active conditions (rheobase current and afterhyperpolarization duration at the soma and plateau behavior at the dendrites). To construct the muscle unit, we used a recently developed muscle modeling approach that reflects the experimentally identified dependencies of muscle activation dynamics on isometric, isokinetic and dynamic variation in muscle length over a full range of stimulation frequencies. Then, we designed the simulation software based on the object-oriented programing paradigm and developed the software using open-source Python language to be fully operational using graphical user interfaces. Using the developed software, separate simulations could be performed for a single motoneuron, muscle unit and motor unit under a wide range of experimental input protocols, and a hierarchical analysis could be performed from a single channel to the entire system behavior. Our model motor unit and simulation software may represent efficient tools not only for researchers studying the neural control of force production from a cellular perspective but also for instructors and students in motor physiology classroom settings.

The Effect of Irradiation Distance on Microhardness of Resin Composites Cured with Different Light Curing Units

PubMed Central

Cekic-Nagas, Isil; Egilmez, Ferhan; Ergun, Gulfem

2010-01-01

Objectives: The aim of this study was to compare the microhardness of five different resin composites at different irradiation distances (2 mm and 9 mm) by using three light curing units (quartz tungsten halogen, light emitting diodes and plasma arc). Methods: A total of 210 disc-shaped samples (2 mm height and 6 mm diameter) were prepared from different resin composites (Simile, Aelite Aesthetic Enamel, Clearfil AP-X, Grandio caps and Filtek Z250). Photoactivation was performed by using quartz tungsten halogen, light emitting diode and plasma arc curing units at two irradiation distances (2 mm and 9 mm). Then the samples (n=7/per group) were stored dry in dark at 37°C for 24 h. The Vickers hardness test was performed on the resin composite layer with a microhardness tester (Shimadzu HMV). Data were statistically analyzed using nonparametric Kruskal Wallis and Mann-Whitney U tests. Results: Statistical analysis revealed that the resin composite groups, the type of the light curing units and the irradiation distances have significant effects on the microhardness values (P<.05). Conclusions: Light curing unit and irradiation distance are important factors to be considered for obtaining adequate microhardness of different resin composite groups. PMID:20922164

Modeling task-specific neuronal ensembles improves decoding of grasp

NASA Astrophysics Data System (ADS)

Smith, Ryan J.; Soares, Alcimar B.; Rouse, Adam G.; Schieber, Marc H.; Thakor, Nitish V.

2018-06-01

Objective. Dexterous movement involves the activation and coordination of networks of neuronal populations across multiple cortical regions. Attempts to model firing of individual neurons commonly treat the firing rate as directly modulating with motor behavior. However, motor behavior may additionally be associated with modulations in the activity and functional connectivity of neurons in a broader ensemble. Accounting for variations in neural ensemble connectivity may provide additional information about the behavior being performed. Approach. In this study, we examined neural ensemble activity in primary motor cortex (M1) and premotor cortex (PM) of two male rhesus monkeys during performance of a center-out reach, grasp and manipulate task. We constructed point process encoding models of neuronal firing that incorporated task-specific variations in the baseline firing rate as well as variations in functional connectivity with the neural ensemble. Models were evaluated both in terms of their encoding capabilities and their ability to properly classify the grasp being performed. Main results. Task-specific ensemble models correctly predicted the performed grasp with over 95% accuracy and were shown to outperform models of neuronal activity that assume only a variable baseline firing rate. Task-specific ensemble models exhibited superior decoding performance in 82% of units in both monkeys (p  <  0.01). Inclusion of ensemble activity also broadly improved the ability of models to describe observed spiking. Encoding performance of task-specific ensemble models, measured by spike timing predictability, improved upon baseline models in 62% of units. Significance. These results suggest that additional discriminative information about motor behavior found in the variations in functional connectivity of neuronal ensembles located in motor-related cortical regions is relevant to decode complex tasks such as grasping objects, and may serve the basis for more reliable and accurate neural prosthesis.

Nonlinear adaptive control of grid-connected three-phase inverters for renewable energy applications

NASA Astrophysics Data System (ADS)

Mahdian-Dehkordi, N.; Namvar, M.; Karimi, H.; Piya, P.; Karimi-Ghartemani, M.

2017-01-01

Distributed generation (DG) units are often interfaced to the main grid using power electronic converters including voltage-source converters (VSCs). A VSC offers dc/ac power conversion, high controllability, and fast dynamic response. Because of nonlinearities, uncertainties, and system parameters' changes involved in the nature of a grid-connected renewable DG system, conventional linear control methods cannot completely and efficiently address all control objectives. In this paper, a nonlinear adaptive control scheme based on adaptive backstepping strategy is presented to control the operation of a grid-connected renewable DG unit. As compared to the popular vector control technique, the proposed controller offers smoother transient responses, and lower level of current distortions. The Lyapunov approach is used to establish global asymptotic stability of the proposed control system. Linearisation technique is employed to develop guidelines for parameters tuning of the controller. Extensive time-domain digital simulations are performed and presented to verify the performance of the proposed controller when employed in a VSC to control the operation of a two-stage DG unit and also that of a single-stage solar photovoltaic system. Desirable and superior performance of the proposed controller is observed.

Calibration of a system to collect visible-light polarization data for classification of geosynchronous satellites

NASA Astrophysics Data System (ADS)

Speicher, Andy; Matin, Mohammad; Tippets, Roger; Chun, Francis

2014-09-01

In order to protect critical military and commercial space assets, the United States Space Surveillance Network must have the ability to positively identify and characterize all space objects. Unfortunately, positive identification and characterization of space objects is a manual and labor intensive process today since even large telescopes cannot provide resolved images of most space objects. The objective of this study was to calibrate a system to exploit the optical signature of unresolved geosynchronous satellite images by collecting polarization data in the visible wavelengths for the purpose of revealing discriminating features. These features may lead to positive identification or classification of each satellite. The system was calibrated with an algorithm and process that takes raw observation data from a two-channel polarimeter and converts it to Stokes parameters S0 and S1. This instrumentation is a new asset for the United States Air Force Academy (USAFA) Department of Physics and consists of one 20-inch Ritchey-Chretien telescope and a dual focal plane system fed with a polarizing beam splitter. This study calibrated the system and collected preliminary polarization data on five geosynchronous satellites to validate performance. Preliminary data revealed that each of the five satellites had a different polarization signature that could potentially lead to identification in future studies.

Hydrogen Fuel Cell Performance as Telecommunications Backup Power in the United States

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kurtz, Jennifer; Saur, Genevieve; Sprik, Sam

2015-03-01

Working in collaboration with the U.S. Department of Energy (DOE) and industry project partners, the National Renewable Energy Laboratory (NREL) acts as the central data repository for the data collected from real-world operation of fuel cell backup power systems. With American Recovery and Reinvestment Act of 2009 (ARRA) co-funding awarded through DOE's Fuel Cell Technologies Office, more than 1,300 fuel cell units were deployed over a three-plus-year period in stationary, material handling equipment, auxiliary power, and backup power applications. This surpassed a Fuel Cell Technologies Office ARRA objective to spur commercialization of an early market technology by installing 1,000 fuelmore » cell units across several different applications, including backup power. By December 2013, 852 backup power units out of 1,330 fuel cell units deployed were providing backup service, mainly for telecommunications towers. For 136 of the fuel cell backup units, project participants provided detailed operational data to the National Fuel Cell Technology Evaluation Center for analysis by NREL's technology validation team. NREL analyzed operational data collected from these government co-funded demonstration projects to characterize key fuel cell backup power performance metrics, including reliability and operation trends, and to highlight the business case for using fuel cells in these early market applications. NREL's analyses include these critical metrics, along with deployment, U.S. grid outage statistics, and infrastructure operation.« less

Psychiatric Comorbidity in Patients from the Addictive Disorders Assistance Units of Galicia: The COPSIAD Study

PubMed Central

Pereiro, César; Pino, Carlos; Flórez, Gerardo; Arrojo, Manuel; Becoña, Elisardo

2013-01-01

The objective of this study is to assess the prevalence of psychiatric comorbidity in patients under treatment within the addictive disorders assistance units of Galicia (Spain). Material and Methods A total of 64 healthcare professionals performed clinical diagnosis of mental disorders (on DSM IV-TR criteria) in 2300 patients treated throughout March 2010 in 21 addictive disorders assistance units. Results 56.3% of patients with substance abuse/dependency also showed some other mental disorder, 42.2% of patients suffering from at least an Axis I condition and 20.2% from some Axis II condition. Mood and anxiety disorders and borderline and antisocial personality disorders were the most frequent disorders in both axes. Conclusions A high comorbidity was found between mental and substance use disorders (SUD) in patients seen at the addictive disorders assistance units of Galicia. PMID:23823135

Design of a highly integrated video acquisition module for smart video flight unit development

NASA Astrophysics Data System (ADS)

Lebre, V.; Gasti, W.

2017-11-01

CCD and APS devices are widely used in space missions as instrument sensors and/or in Avionics units like star detectors/trackers. Therefore, various and numerous designs of video acquisition chains have been produced. Basically, a classical video acquisition chain is constituted of two main functional blocks: the Proximity Electronics (PEC), including detector drivers and the Analogue Processing Chain (APC) Electronics that embeds the ADC, a master sequencer and the host interface. Nowadays, low power technologies allow to improve the integration, radiometric performances and power budget optimisation of video units and to standardize video units design and development. To this end, ESA has initiated a development activity through a competitive process requesting the expertise of experienced actors in the field of high resolution electronics for earth observation and Scientific missions. THALES ALENIA SPACE has been granted this activity as a prime contractor through ESA contract called HIVAC that holds for Highly Integrated Video Acquisition Chain. This paper presents main objectives of the on going HIVAC project and focuses on the functionalities and performances offered by the usage of the under development HIVAC board for future optical instruments.

Carpentry. Competency Statements/Objectives and Reference Guide. Revised.

ERIC Educational Resources Information Center

North Carolina State Dept. of Public Instruction, Raleigh. Div. of Vocational Education.

This curriculum guide provides competency statements/objectives for an 11th- to 12th-grade trade and industrial education course in carpentry. The first half of the guide consists of competency statements for the 35 units of the curriculum. Each competency statement consists of a terminal objective and specific objectives for each unit, referenced…

Mechanical Systems. Competency Statements/Objectives and Reference Guide.

ERIC Educational Resources Information Center

North Carolina State Dept. of Public Instruction, Raleigh. Div. of Vocational Education.

This curriculum guide provides competency statements/objectives for an 11th- to 12th-grade trade and industrial education course in mechanical systems. The first half of the guide consists of competency statements for the 53 units of the curriculum. Each competency statement consists of a terminal objective and specific objectives for each unit,…

Comparing Observations, 1st Experimental Edition.

ERIC Educational Resources Information Center

Butts, David P.

Objectives for this module include the ability to: (1) order objects by comparing a property which the objects have in common (such as length, area, volume or mass), (2) describe objects (length, area, volume, mass, etc.) by comparing them quantitatively using either arbitrary units of comparison or standard units of comparison, and (3) describe…

Goddard Conference on Mass Storage Systems and Technologies, volume 2

NASA Technical Reports Server (NTRS)

Kobler, Ben (Editor); Hariharan, P. C. (Editor)

1993-01-01

Papers and viewgraphs from the conference are presented. Discussion topics include the IEEE Mass Storage System Reference Model, data archiving standards, high-performance storage devices, magnetic and magneto-optic storage systems, magnetic and optical recording technologies, high-performance helical scan recording systems, and low end helical scan tape drives. Additional discussion topics addressed the evolution of the identifiable unit for processing (file, granule, data set, or some similar object) as data ingestion rates increase dramatically, and the present state of the art in mass storage technology.

Developing a Predictive Capability for Bioluminescence Signatures

DTIC Science & Technology

2011-09-30

sources of bioluminescence are dinoflagellates, common unicellular plankton that are also known to form red tides. Dinoflagellate bioluminescence is...wakes to locate their prey. The bioluminescence signature of a moving object depends on the bioluminescence potential of the organisms (related to...AUTHOR(S) 5d. PROJECT NUMBER 5e. TASK NUMBER 5f. WORK UNIT NUMBER 7. PERFORMING ORGANIZATION NAME(S) AND ADDRESS(ES) University of California, San

The 5K70SK automatically tuned, high power, S-band klystron

NASA Technical Reports Server (NTRS)

Goldfinger, A.

1977-01-01

Primary objectives include delivery of 44 5K70SK klystron amplifier tubes and 26 remote tuner assemblies with spare parts kits. Results of a reliability demonstration on a klystron test cavity are discussed, along with reliability tests performed on a remote tuning unit. Production problems and one design modification are reported and discussed. Results of PAT and DVT are included.

The Effect of New Experimental System Design Related to the Plasma State on Achievement of Candidate Elementary Science Teachers

ERIC Educational Resources Information Center

Korkmaz, S. D.; Aybek, E. C.; Pat, S.

2015-01-01

The educational objectives related to the plasma state of matter, which comprises more than 90% of our universe, are located in the "properties of substances" unit in the 9th grade high school physics course curriculum. If there are physical and technical limitations while performing an experiment, the use of different techniques is…

The Measurement of Army Battalion Performance

DTIC Science & Technology

1981-01-01

reflect the degree to which these goals are met. Familiar examples of this approach would include cost/benefit analysis and a management -by-objectives...these goals or how they may change . Through this model, the assessment of organizational effectiveness does not proceed through a determination of...Further, the unit must meet these demands in the fact of shifting priorities and with changing resource levels. In this

Using WebQLM to Enhance Performance in Argumentative Writing among Year 12 ESL Students

ERIC Educational Resources Information Center

Tan-Ooi, L. C.; Tan, K. E.

2013-01-01

This study investigated the impact of a designed web-based learning module on Year 12 students' learning of argumentative writing. The module known as WebQuest Learning Module or WebQLM comprises four units of learning. The subjects were 68 Year 12 Arts Stream students in an urban school in Penang. The main objective of this study was to…

Electronic Commerce: A National Performance Review Initiative.

DTIC Science & Technology

1995-09-01

This study of the National Information Infrastructure (NII) was conducted as part of IDA’s Central Research Program. Electronic commerce is one of... commerce is nothing more than conducting business via electronic means. An outgrowth of the NPR, the electronic commerce initiative, commits the...private, and public sectors are committed to implementing electronic commerce throughout the United States. The objective ol this paper is to enhance

A Review of Human Papillomavirus (HPV) Infection and HPV Vaccine-Related Attitudes and Sexual Behaviors among College-Aged Women in the United States

ERIC Educational Resources Information Center

Ratanasiripong, Nop T.

2012-01-01

Objective: To identify human papillomavirus (HPV) infection and HPV vaccine-related attitudes among college-aged women and the relationship between HPV vaccine uptake and subsequent sexual behaviors. Methods: PubMed, MEDLINE, CINAHL, and Google Scholar searches were performed from 2006, the date after the first HPV vaccine became available, to…

Objective Versus Subjective Military Pilot Selection Methods in the United States of America

DTIC Science & Technology

2015-12-14

a computerized test designed to assess pilot skills by measuring spatial orientation and psychomotor skills and multitasking . The second is the...AFRL-SA-WP-SR-2015-0028 Objective Versus Subjective Military Pilot Selection Methods in the United States of America Joe...September 2014 4. TITLE AND SUBTITLE Objective Versus Subjective Military Pilot Selection Methods in the United States of America 5a. CONTRACT

Measuring technical efficiency of output quality in intensive care units.

PubMed

Junoy, J P

1997-01-01

Presents some examples of the implications derived from imposing the objective of maximizing social welfare, subject to limited resources, on ethical care patients management in respect of quality performance of health services. Conventional knowledge of health economics points out that critically ill patients are responsible for increased use of technological resources and that they receive a high proportion of health care resources. Attempts to answer, from the point of view of microeconomics, the question: how do we measure comparative efficiency in the management of intensive care units? Analyses this question through data from an international empirical study using micro-economic measures of productive efficiency in public services (data envelopment analysis). Results show a 28.8 per cent level of technical inefficiency processing data from 25 intensive care units in the USA.

Performance evaluation of 388 full-scale waste stabilization pond systems with seven different configurations.

PubMed

Espinosa, Maria Fernanda; von Sperling, Marcos; Verbyla, Matthew E

2017-02-01

Waste stabilization ponds (WSPs) and their variants are one the most widely used wastewater treatment systems in the world. However, the scarcity of systematic performance data from full-scale plants has led to challenges associated with their design. The objective of this research was to assess the performance of 388 full-scale WSP systems located in Brazil, Ecuador, Bolivia and the United States through the statistical analysis of available monitoring data. Descriptive statistics were calculated of the influent and effluent concentrations and the removal efficiencies for 5-day biochemical oxygen demand (BOD 5 ), total suspended solids (TSS), ammonia nitrogen (N-Ammonia), and either thermotolerant coliforms (TTC) or Escherichia coli for each WSP system, leading to a broad characterization of actual treatment performance. Compliance with different water quality and system performance goals was also evaluated. The treatment plants were subdivided into seven different categories, according to their units and flowsheet. The median influent concentrations of BOD 5 and TSS were 431 mg/L and 397 mg/L and the effluent concentrations varied from technology to technology, but median values were 50 mg/L and 47 mg/L, respectively. The median removal efficiencies were 85% for BOD 5 and 75% for TSS. The overall removals of TTC and E. coli were 1.74 and 1.63 log 10 units, respectively. Future research is needed to better understand the influence of design, operational and environmental factors on WSP system performance.

What Is the Unit of Visual Attention? Object for Selection, but Boolean Map for Access

ERIC Educational Resources Information Center

Huang, Liqiang

2010-01-01

In the past 20 years, numerous theories and findings have suggested that the unit of visual attention is the object. In this study, I first clarify 2 different meanings of unit of visual attention, namely the unit of access in the sense of measurement and the unit of selection in the sense of division. In accordance with this distinction, I argue…

Regional Warming from Aerosol Removal over the United States: Results from a Transient 2010-2050 Climate Simulation

NASA Technical Reports Server (NTRS)

Mickley, L. J.; Leibensperger, E. M.; Jacob, D. J.; Rind, D.

2012-01-01

We use a general circulation model (NASA Goddard Institute for Space Studies GCM 3) to investigate the regional climate response to removal of aerosols over the United States. We perform a pair of transient 2010e2050 climate simulations following a scenario of increasing greenhouse gas concentrations, with and without aerosols over the United States and with present-day aerosols elsewhere. We find that removing U.S. aerosol significantly enhances the warming from greenhouse gases in a spatial pattern that strongly correlates with that of the aerosol. Warming is nearly negligible outside the United States, but annual mean surface temperatures increase by 0.4e0.6 K in the eastern United States. Temperatures during summer heat waves in the Northeast rise by as much as 1e2 K due to aerosol removal, driven in part by positive feedbacks involving soil moisture and low cloud cover. Reducing U.S. aerosol sources to achieve air quality objectives could thus have significant unintended regional warming consequences.

INNOVATIVE TECHNOLOGY VERIFICATION REPORT XRF ...

EPA Pesticide Factsheets

The Elvatech, Ltd. ElvaX (ElvaX) x-ray fluorescence (XRF) analyzer distributed in the United States by Xcalibur XRF Services (Xcalibur), was demonstrated under the U.S. Environmental Protection Agency (EPA) Superfund Innovative Technology Evaluation (SITE) Program. The field portion of the demonstration was conducted in January 2005 at the Kennedy Athletic, Recreational and Social Park (KARS) at Kennedy Space Center on Merritt Island, Florida. The demonstration was designed to collect reliable performance and cost data for the ElvaX analyzer and seven other commercially available XRF instruments for measuring trace elements in soil and sediment. The performance and cost data were evaluated to document the relative performance of each XRF instrument. This innovative technology verification report describes the objectives and the results of that evaluation and serves to verify the performance and cost of the ElvaX analyzer. Separate reports have been prepared for the other XRF instruments that were evaluated as part of the demonstration. The objectives of the evaluation included determining each XRF instrument’s accuracy, precision, sample throughput, and tendency for matrix effects. To fulfill these objectives, the field demonstration incorporated the analysis of 326 prepared samples of soil and sediment that contained 13 target elements. The prepared samples included blends of environmental samples from nine different sample collection sites as well as s

The Athena X-ray Integral Field Unit (X-IFU)

NASA Technical Reports Server (NTRS)

Barret, Didier; Trong, Thein Lam; Den Herder, Jan-Willem; Piro, Luigi; Barcons, Xavier; Huovelin, Juhani; Kelley, Richard; Mas-Hesse, J. Miquel; Mitsuda, Kazuhisa; Paltani, Stephane;

Advanced technology payoffs for future rotorcraft, commuter aircraft, cruise missile, and APU propulsion systems

NASA Technical Reports Server (NTRS)

Turk, M. A.; Zeiner, P. K.

1986-01-01

In connection with the significant advances made regarding the performance of larger gas turbines, challenges arise concerning the improvement of small gas turbine engines in the 250 to 1000 horsepower range. In response to these challenges, the NASA/Army-sponsored Small Engine Component Technology (SECT) study was undertaken with the objective to identify the engine cycle, configuration, and component technology requirements for the substantial performance improvements desired in year-2000 small gas turbine engines. In the context of this objective, an American turbine engine company evaluated engines for four year-2000 applications, including a rotorcraft, a commuter aircraft, a supersonic cruise missile, and an auxiliary power unit (APU). Attention is given to reference missions, reference engines, reference aircraft, year-2000 technology projections, cycle studies, advanced engine selections, and a technology evaluation.

Development, implementation, and evaluation of an energy and power unit of instruction for junior high school industrial arts/technology education programs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Litowitz, L.S.

The unit of instruction was developed and refined in three stages. In the first stage, potential objectives for the unit of instruction were identified from appropriate literature. The objectives were mailed to a group primarily consisting of IA/TE state supervisors for critiquing. Upon receiving responses from the critique group, a revised list of objectives was created. From this revised list a content framework was developed. The content framework was then submitted for critiquing to a second group primarily consisting of energy and power curriculum developers. The responses from the second critique group were summarized, and a refined content framework wasmore » produced. A series of twelve hand-on learning activities for junior high school students were then developed to fulfill the unit objectives and concepts identified in the content framework. These activities were critiqued by a final group of experts representing in-service junior high school IA/TE teachers. Revisions to the unit of instruction were made based on feedback from the final critique group. The unit of instruction was then implemented in a junior high school setting as a final means of obtaining formative evaluation. Results of the formative evaluation indicated that the students who participated in the field test had met many of the unit objectives. Recommendations as to the use of the unit of instruction were made.« less

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brown, Nicholas R.; Carlsen, Brett W.; Dixon, Brent W.

Dynamic fuel cycle simulation tools are intended to model holistic transient nuclear fuel cycle scenarios. As with all simulation tools, fuel cycle simulators require verification through unit tests, benchmark cases, and integral tests. Model validation is a vital aspect as well. Although compara-tive studies have been performed, there is no comprehensive unit test and benchmark library for fuel cycle simulator tools. The objective of this paper is to identify the must test functionalities of a fuel cycle simulator tool within the context of specific problems of interest to the Fuel Cycle Options Campaign within the U.S. Department of Energy smore » Office of Nuclear Energy. The approach in this paper identifies the features needed to cover the range of promising fuel cycle options identified in the DOE-NE Fuel Cycle Evaluation and Screening (E&S) and categorizes these features to facilitate prioritization. Features were categorized as essential functions, integrating features, and exemplary capabilities. One objective of this paper is to propose a library of unit tests applicable to each of the essential functions. Another underlying motivation for this paper is to encourage an international dialog on the functionalities and standard test methods for fuel cycle simulator tools.« less

Adaptation of the Chinese edition of the CSBS-DP: a cross-cultural comparison of prelinguistic development between Taiwanese and American toddlers.

PubMed

Lin, Chu-Sui; Chiu, Chun-Hao

2014-05-01

This study was conducted with 171 toddlers aged 1-2 in Taiwan using the Chinese version of the Communication and Symbolic Behavior Scale-Developmental Profile (CSBS-DP). A significant difference in the scores for the symbolic subscale was observed between the test subjects in Taiwan and the norm established in the original CSBS-DP in the United States. Furthermore, this difference varied across the three assessment tools of the CSBS-DP: the Infant-Toddler Checklist, the Caregiver Questionnaire, and the Behavior Sample. In the checklist and caregiver questionnaires, the scores in the language comprehension cluster and the object use cluster were significantly lower for Taiwanese toddlers than for their counterparts in the United States. In the behavior samples, however, the toddlers in Taiwan scored significantly higher than their peers in the United States in the object use cluster and lower than their American counterparts in the language comprehension cluster. This discrepancy suggests that cultural factors have a potential impact on performance, and thus such factors need to be considered in future endeavors to improve upon the Chinese version of the CSBS-DP. Copyright © 2014 Elsevier Ltd. All rights reserved.

STS-50 Space Shuttle mission report

NASA Technical Reports Server (NTRS)

Fricke, Robert W.

1992-01-01

The STS-50 Space Shuttle Program Mission Report contains a summary of the Orbiter, External Tank (ET), Solid Rocket Booster/Redesigned Solid Rocket Motor (SRB/RSRM), and the Space Shuttle main engine (SSME) subsystem performance during the forty-eighth flight of the Space Shuttle Program, and the twelfth flight of the Orbiter vehicle Columbia (OV-102). In addition to the Columbia vehicle, the flight vehicle consisted of the following: an ET which was designated ET-50 (LUT-43); three SSME's which were serial numbers 2019, 2031, and 2011 in positions 1, 2, and 3, respectively; and two SRB's which were designated BI-051. The lightweight/redesigned RSRM's installed in each SRB were designated 360L024A for the left RSRM and 360M024B for the right RSRM. The primary objective of the STS-50 flight was to successfully perform the planned operations of the United States Microgravity Laboratory (USML-1) payload. The secondary objectives of this flight were to perform the operations required by the Investigations into Polymer Membrane Processing (IPMP), and the Shuttle Amateur Radio Experiment 2 (SAREX-2) payloads. An additional secondary objective was to meet the requirements of the Ultraviolet Plume Instrument (UVPI), which was flown as a payload of opportunity.

Evaluating the Relationship between Productivity and Quality in Emergency Departments

PubMed Central

Bastian, Nathaniel D.; Riordan, John P.

2017-01-01

Background In the United States, emergency departments (EDs) are constantly pressured to improve operational efficiency and quality in order to gain financial benefits and maintain a positive reputation. Objectives The first objective is to evaluate how efficiently EDs transform their input resources into quality outputs. The second objective is to investigate the relationship between the efficiency and quality performance of EDs and the factors affecting this relationship. Methods Using two data sources, we develop a data envelopment analysis (DEA) model to evaluate the relative efficiency of EDs. Based on the DEA result, we performed multinomial logistic regression to investigate the relationship between ED efficiency and quality performance. Results The DEA results indicated that the main source of inefficiencies was working hours of technicians. The multinomial logistic regression result indicated that the number of electrocardiograms and X-ray procedures conducted in the ED and the length of stay were significantly associated with the trade-offs between relative efficiency and quality. Structural ED characteristics did not influence the relationship between efficiency and quality. Conclusions Depending on the structural and operational characteristics of EDs, different factors can affect the relationship between efficiency and quality. PMID:29065673

Multidimensional evaluation of performance with experimental application of balanced scorecard: a two year experience

PubMed Central

2011-01-01

Background In today's dynamic health-care system, organizations such as hospitals are required to improve their performance for multiple stakeholders and deliver an integrated care that means to work effectively, be innovative and organize efficiently. Achieved goals and levels of quality can be successfully measured by a multidimensional approach like Balanced Scorecard (BSC). The aim of the study was to verify the opportunity to introduce BSC framework to measure performance in St. Anna University Hospital of Ferrara, applying it to the Clinical Laboratory Operative Unit in order to compare over time performance results and achievements of assigned targets. Methods In the first experience with BSC we distinguished four perspectives, according to Kaplan and Norton, identified Key Performance Areas and Key Performance Indicators, set standards and weights for each objective, collected data for all indicators, recognized cause-and-effect relationships in a strategic map. One year later we proceeded with the next data collection and analysed the preservation of framework aptitude to measure Operative Unit performance. In addition, we verified the ability to underline links between strategic actions belonging to different perspectives in producing outcomes changes. Results The BSC was found to be effective for underlining existing problems and identifying opportunities for improvements. The BSC also revealed the specific perspective contribution to overall performance enhancement. After time results comparison was possible depending on the selection of feasible and appropriate key performance indicators, which was occasionally limited by data collection problems. Conclusions The first use of BSC to compare performance at Operative Unit level, in course of time, suggested this framework can be successfully adopted for results measuring and revealing effective health factors, allowing health-care quality improvements. PMID:21586111

Multidimensional evaluation of performance with experimental application of balanced scorecard: a two year experience.

PubMed

Lupi, Silvia; Verzola, Adriano; Carandina, Gianni; Salani, Manuela; Antonioli, Paola; Gregorio, Pasquale

2011-05-17

In today's dynamic health-care system, organizations such as hospitals are required to improve their performance for multiple stakeholders and deliver an integrated care that means to work effectively, be innovative and organize efficiently. Achieved goals and levels of quality can be successfully measured by a multidimensional approach like Balanced Scorecard (BSC). The aim of the study was to verify the opportunity to introduce BSC framework to measure performance in St. Anna University Hospital of Ferrara, applying it to the Clinical Laboratory Operative Unit in order to compare over time performance results and achievements of assigned targets. In the first experience with BSC we distinguished four perspectives, according to Kaplan and Norton, identified Key Performance Areas and Key Performance Indicators, set standards and weights for each objective, collected data for all indicators, recognized cause-and-effect relationships in a strategic map. One year later we proceeded with the next data collection and analysed the preservation of framework aptitude to measure Operative Unit performance. In addition, we verified the ability to underline links between strategic actions belonging to different perspectives in producing outcomes changes. The BSC was found to be effective for underlining existing problems and identifying opportunities for improvements. The BSC also revealed the specific perspective contribution to overall performance enhancement. After time results comparison was possible depending on the selection of feasible and appropriate key performance indicators, which was occasionally limited by data collection problems. The first use of BSC to compare performance at Operative Unit level, in course of time, suggested this framework can be successfully adopted for results measuring and revealing effective health factors, allowing health-care quality improvements.

Conflict Resolution Unit.

ERIC Educational Resources Information Center

Busselle, Tish

This 7-day unit, intended for use with secondary students, contains a statement of rationale and objectives, lesson plans, class assignments, teacher and student bibliographies, and suggestions for instructional materials on conflict resolution between individuals, groups, and nations. Among the six objectives listed for the unit are: 1) explain…

Comparisons of auction mechanisms in a multiple unit setting: A consideration for restructuring electric power markets

NASA Astrophysics Data System (ADS)

Bernard, John Charles

The objective of this study was to compare the performance of five single sided auctions that could be used in restructured electric power markets across different market sizes in a multiple unit setting. Auction selection would profoundly influence an industry over $200 billion in size in the United States, and the consequences of implementing an inappropriate mechanism would be great. Experimental methods were selected to analyze the auctions. Two rounds of experiments were conducted, the first testing the sealed offer last accepted offer (LAO) and first rejected offer (FRO), and the clock English (ENG) and sealed offer English (SOE) in markets of sizes two and six. The FRO, SOE, and ENG used the same pricing rule. Second round testing was on the LAO, FRO, and the nonuniform price multiple unit Vickrey (MUV) in markets of sizes two, four, and six. Experiments lasted 23 and 75 periods for rounds 1 and 2 respectively. Analysis of variance and contrast analysis were used to examine the data. The four performance measures used were price, efficiency, profits per unit, and supply revelation. Five basic principles were also assessed: no sales at losses, all low cost capacity should be offered and sold, no high cost capacity should sell, and the market should clear. It was expected group size and auction type would affect performance. For all performance measures, group size was a significant variable, with smaller groups showing poorer performance. Auction type was significant only for the efficiency performance measure, where clock auctions outperformed the others. Clock auctions also proved superior for the first four principles. The FRO performed poorly in almost all situations, and should not be a preferred mechanism in any market. The ENG was highly efficient, but expensive for the buyer. The SOE appeared superior to the FRO and ENG. The clock improves efficiency over the FRO while less information kept prices under the ENG. The MUV was superior in revealing costs, but performed less well in other categories. While concerns existed for all the mechanisms investigated, the commonly proposed LAO was the best option for restructured electric power markets.

NEXT Single String Integration Test Results

NASA Technical Reports Server (NTRS)

Soulas, George C.; Patterson, Michael J.; Pinero, Luis; Herman, Daniel A.; Snyder, Steven John

2010-01-01

As a critical part of NASA's Evolutionary Xenon Thruster (NEXT) test validation process, a single string integration test was performed on the NEXT ion propulsion system. The objectives of this test were to verify that an integrated system of major NEXT ion propulsion system elements meets project requirements, to demonstrate that the integrated system is functional across the entire power processor and xenon propellant management system input ranges, and to demonstrate to potential users that the NEXT propulsion system is ready for transition to flight. Propulsion system elements included in this system integration test were an engineering model ion thruster, an engineering model propellant management system, an engineering model power processor unit, and a digital control interface unit simulator that acted as a test console. Project requirements that were verified during this system integration test included individual element requirements ; integrated system requirements, and fault handling. This paper will present the results of these tests, which include: integrated ion propulsion system demonstrations of performance, functionality and fault handling; a thruster re-performance acceptance test to establish baseline performance: a risk-reduction PMS-thruster integration test: and propellant management system calibration checks.

Object recognition with hierarchical discriminant saliency networks.

PubMed

Han, Sunhyoung; Vasconcelos, Nuno

2014-01-01

The benefits of integrating attention and object recognition are investigated. While attention is frequently modeled as a pre-processor for recognition, we investigate the hypothesis that attention is an intrinsic component of recognition and vice-versa. This hypothesis is tested with a recognition model, the hierarchical discriminant saliency network (HDSN), whose layers are top-down saliency detectors, tuned for a visual class according to the principles of discriminant saliency. As a model of neural computation, the HDSN has two possible implementations. In a biologically plausible implementation, all layers comply with the standard neurophysiological model of visual cortex, with sub-layers of simple and complex units that implement a combination of filtering, divisive normalization, pooling, and non-linearities. In a convolutional neural network implementation, all layers are convolutional and implement a combination of filtering, rectification, and pooling. The rectification is performed with a parametric extension of the now popular rectified linear units (ReLUs), whose parameters can be tuned for the detection of target object classes. This enables a number of functional enhancements over neural network models that lack a connection to saliency, including optimal feature denoising mechanisms for recognition, modulation of saliency responses by the discriminant power of the underlying features, and the ability to detect both feature presence and absence. In either implementation, each layer has a precise statistical interpretation, and all parameters are tuned by statistical learning. Each saliency detection layer learns more discriminant saliency templates than its predecessors and higher layers have larger pooling fields. This enables the HDSN to simultaneously achieve high selectivity to target object classes and invariance. The performance of the network in saliency and object recognition tasks is compared to those of models from the biological and computer vision literatures. This demonstrates benefits for all the functional enhancements of the HDSN, the class tuning inherent to discriminant saliency, and saliency layers based on templates of increasing target selectivity and invariance. Altogether, these experiments suggest that there are non-trivial benefits in integrating attention and recognition.

Self-Contained Math Manual. Teacher's Guide.

ERIC Educational Resources Information Center

Grant, Shelia I.

This instructional manual consists of 11 competency-based units for a mathematics course for trade and industrial programs in Texas. Each instructional unit includes the following basic components: unit and specific objectives, notes to the instructor (outline of steps to follow in accomplishing specific objectives), information sheets,…

PSO Algorithm for an Optimal Power Controller in a Microgrid

NASA Astrophysics Data System (ADS)

Al-Saedi, W.; Lachowicz, S.; Habibi, D.; Bass, O.

2017-07-01

This paper presents the Particle Swarm Optimization (PSO) algorithm to improve the quality of the power supply in a microgrid. This algorithm is proposed for a real-time selftuning method that used in a power controller for an inverter based Distributed Generation (DG) unit. In such system, the voltage and frequency are the main control objectives, particularly when the microgrid is islanded or during load change. In this work, the PSO algorithm is implemented to find the optimal controller parameters to satisfy the control objectives. The results show high performance of the applied PSO algorithm of regulating the microgrid voltage and frequency.

Research pressure instrumentation for NASA space shuttle main engine

NASA Technical Reports Server (NTRS)

Anderson, P. J.; Nussbaum, P.; Gustafson, G.

1985-01-01

The breadboard feasibility model of a silicon piezoresistive pressure transducer suitable for space shuttle main engine (SSME) applications was demonstrated. The development of pressure instrumentation for the SSME was examined. The objective is to develop prototype pressure transducers which are targeted to meet the SSME performance design goals and to fabricate, test and deliver a total of 10 prototype units. Effective utilization of the many advantages of silicon piezoresistive strain sensing technology to achieve the objectives of advanced state-of-the-art pressure sensors for reliability, accuracy and ease of manufacture is analyzed. Integration of multiple functions on a single chip is the key attribute of the technology.

A complete X-ray sample of the high latitude sky from HEAO-1 A-2: log N lo S and luminosity functions

NASA Technical Reports Server (NTRS)

Piccinotti, G.; Mushotzky, R. F.; Boldt, E. A.; Holt, S. S.; Marshall, F. E.; Serlemitsos, P. J.; Shafer, R. A.

1981-01-01

An experiment was performed in which a complete X-ray survey of the 8.2 steradians of the sky at galactic latitudes where the absolute value of b is 20 deg down to a limiting sensitivity of 3.1 x ten to the minus 11th power ergs/sq cm sec in the 2-10 keV band. Of the 85 detected sources 17 were identified with galactic objects, 61 were identified with extragalactic objects, and 7 remain unidentified. The log N - log S relation for the non-galactic objects is well fit by the Euclidean relationship. The X-ray spectra of these objects were used to construct log N - log S in physical units. The complete sample of identified sources was used to construct X-ray luminosity functions, using the absolute maximum likelihood method, for clusters galaxies and active galactic nuclei.

Special object extraction from medieval books using superpixels and bag-of-features

NASA Astrophysics Data System (ADS)

Yang, Ying; Rushmeier, Holly

2017-01-01

We propose a method to extract special objects in images of medieval books, which generally represent, for example, figures and capital letters. Instead of working on the single-pixel level, we consider superpixels as the basic classification units for improved time efficiency. More specifically, we classify superpixels into different categories/objects by using a bag-of-features approach, where a superpixel category classifier is trained with the local features of the superpixels of the training images. With the trained classifier, we are able to assign the category labels to the superpixels of a historical document image under test. Finally, special objects can easily be identified and extracted after analyzing the categorization results. Experimental results demonstrate that, as compared to the state-of-the-art algorithms, our method provides comparable performance for some historical books but greatly outperforms them in terms of generality and computational time.

Multi-arm spectrometer for parallel frequency analysis of radio-wave signals oriented to astronomical observations

NASA Astrophysics Data System (ADS)

Shcherbakov, Alexandre S.; Chavez Dagostino, Miguel; Arellanes, Adan Omar; Tepichin Rodriguez, Eduardo

2017-08-01

We describe a potential prototype of modern spectrometer based on acousto-optical technique with three parallel optical arms for analysis of radio-wave signals specific to astronomical observations. Each optical arm exhibits original performances to provide parallel multi-band observations with different scales simultaneously. Similar multi-band instrument is able to realize measurements within various scenarios from planetary atmospheres to attractive objects in the distant Universe. The arrangement under development has two novelties. First, each optical arm represents an individual spectrum analyzer with its individual performances. Such an approach is conditioned by exploiting various materials for acousto-optical cells operating within various regimes, frequency ranges, and light wavelengths from independent light sources. Individually produced beam shapers give both the needed incident light polarization and the required apodization for light beam to increase the dynamic range of the system as a whole. After parallel acousto-optical processing, a few data flows from these optical arms are united by the joint CCD matrix on the stage of the combined extremely high-bit rate electronic data processing that provides the system performances as well. The other novelty consists in the usage of various materials for designing wide-aperture acousto-optical cells exhibiting the best performances within each of optical arms. Here, one can mention specifically selected cuts of tellurium dioxide, bastron, and lithium niobate, which overlap selected areas within the frequency range from 40 MHz to 2.0 GHz. Thus one yields the united versatile instrument for comprehensive studies of astronomical objects simultaneously with precise synchronization in various frequency ranges.

Space shuttle main engine: Interactive design challenges

NASA Technical Reports Server (NTRS)

Mccarty, J. P.; Wood, B. K.

1985-01-01

The operating requirements established by NASA for the SSME were considerably more demanding than those for earlier rocket engines used in the military launch vehicles or Apollo program. The SSME, in order to achieve the high performance, low weight, long life, reusable objectives, embodied technical demands far in excess of its predecessor rocket engines. The requirements dictated the use of high combustion pressure and the staged combustion cycle which maximizes performance through total use of all propellants in the main combustion process. This approach presented a myriad of technical challenges for maximization of performance within attainable state of the art capabilities for operating pressures, operating temperatures and rotating machinery efficiencies. Controlling uniformity of the high pressure turbomachinery turbine temperature environment was a key challenge for thrust level and life capability demanding innovative engineering. New approaches in the design of the components were necessary to accommodate the multiple use, minimum maintenance objectives. Included were the use of line replaceable units to facilitate field maintenance automatic checkout and internal inspection capabilities.

An Objective Verification of the North American Mesoscale Model for Kennedy Space Center and Cape Canaveral Air Force Station

NASA Technical Reports Server (NTRS)

Bauman, William H., III

2010-01-01

The 45th Weather Squadron (45 WS) Launch Weather Officers (LWO's) use the 12-km resolution North American Mesoscale (NAM) model (MesoNAM) text and graphical product forecasts extensively to support launch weather operations. However, the actual performance of the model at Kennedy Space Center (KSC) and Cape Canaveral Air Force Station (CCAFS) has not been measured objectively. In order to have tangible evidence of model performance, the 45 WS tasked the Applied Meteorology Unit (AMU; Bauman et ai, 2004) to conduct a detailed statistical analysis of model output compared to observed values. The model products are provided to the 45 WS by ACTA, Inc. and include hourly forecasts from 0 to 84 hours based on model initialization times of 00, 06, 12 and 18 UTC. The objective analysis compared the MesoNAM forecast winds, temperature (T) and dew pOint (T d), as well as the changes in these parameters over time, to the observed values from the sensors in the KSC/CCAFS wind tower network shown in Table 1. These objective statistics give the forecasters knowledge of the model's strengths and weaknesses, which will result in improved forecasts for operations.

Objective assessment of operator performance during ultrasound-guided procedures.

PubMed

Tabriz, David M; Street, Mandie; Pilgram, Thomas K; Duncan, James R

2011-09-01

Simulation permits objective assessment of operator performance in a controlled and safe environment. Image-guided procedures often require accurate needle placement, and we designed a system to monitor how ultrasound guidance is used to monitor needle advancement toward a target. The results were correlated with other estimates of operator skill. The simulator consisted of a tissue phantom, ultrasound unit, and electromagnetic tracking system. Operators were asked to guide a needle toward a visible point target. Performance was video-recorded and synchronized with the electromagnetic tracking data. A series of algorithms based on motor control theory and human information processing were used to convert raw tracking data into different performance indices. Scoring algorithms converted the tracking data into efficiency, quality, task difficulty, and targeting scores that were aggregated to create performance indices. After initial feasibility testing, a standardized assessment was developed. Operators (N = 12) with a broad spectrum of skill and experience were enrolled and tested. Overall scores were based on performance during ten simulated procedures. Prior clinical experience was used to independently estimate operator skill. When summed, the performance indices correlated well with estimated skill. Operators with minimal or no prior experience scored markedly lower than experienced operators. The overall score tended to increase according to operator's clinical experience. Operator experience was linked to decreased variation in multiple aspects of performance. The aggregated results of multiple trials provided the best correlation between estimated skill and performance. A metric for the operator's ability to maintain the needle aimed at the target discriminated between operators with different levels of experience. This study used a highly focused task model, standardized assessment, and objective data analysis to assess performance during simulated ultrasound-guided needle placement. The performance indices were closely related to operator experience.

Patient Safety Incidents and Nursing Workload 1

PubMed Central

Carlesi, Katya Cuadros; Padilha, Kátia Grillo; Toffoletto, Maria Cecília; Henriquez-Roldán, Carlos; Juan, Monica Andrea Canales

2017-01-01

ABSTRACT Objective: to identify the relationship between the workload of the nursing team and the occurrence of patient safety incidents linked to nursing care in a public hospital in Chile. Method: quantitative, analytical, cross-sectional research through review of medical records. The estimation of workload in Intensive Care Units (ICUs) was performed using the Therapeutic Interventions Scoring System (TISS-28) and for the other services, we used the nurse/patient and nursing assistant/patient ratios. Descriptive univariate and multivariate analysis were performed. For the multivariate analysis we used principal component analysis and Pearson correlation. Results: 879 post-discharge clinical records and the workload of 85 nurses and 157 nursing assistants were analyzed. The overall incident rate was 71.1%. It was found a high positive correlation between variables workload (r = 0.9611 to r = 0.9919) and rate of falls (r = 0.8770). The medication error rates, mechanical containment incidents and self-removal of invasive devices were not correlated with the workload. Conclusions: the workload was high in all units except the intermediate care unit. Only the rate of falls was associated with the workload. PMID:28403334

Integrated active sensor system for real time vibration monitoring.

PubMed

Liang, Qijie; Yan, Xiaoqin; Liao, Xinqin; Cao, Shiyao; Lu, Shengnan; Zheng, Xin; Zhang, Yue

2015-11-05

We report a self-powered, lightweight and cost-effective active sensor system for vibration monitoring with multiplexed operation based on contact electrification between sensor and detected objects. The as-fabricated sensor matrix is capable of monitoring and mapping the vibration state of large amounts of units. The monitoring contents include: on-off state, vibration frequency and vibration amplitude of each unit. The active sensor system delivers a detection range of 0-60 Hz, high accuracy (relative error below 0.42%), long-term stability (10000 cycles). On the time dimension, the sensor can provide the vibration process memory by recording the outputs of the sensor system in an extend period of time. Besides, the developed sensor system can realize detection under contact mode and non-contact mode. Its high performance is not sensitive to the shape or the conductivity of the detected object. With these features, the active sensor system has great potential in automatic control, remote operation, surveillance and security systems.

Results and analysis of saltstone cores taken from saltstone disposal unit cell 2A

DOE Office of Scientific and Technical Information (OSTI.GOV)

Reigel, M. M.; Hill, K. A.

2016-03-01

As part of an ongoing Performance Assessment (PA) Maintenance Plan, Savannah River Remediation (SRR) has developed a sampling and analyses strategy to facilitate the comparison of field-emplaced samples (i.e., saltstone placed and cured in a Saltstone Disposal Unit (SDU)) with samples prepared and cured in the laboratory. The primary objectives of the Sampling and Analyses Plan (SAP) are; (1) to demonstrate a correlation between the measured properties of laboratory-prepared, simulant samples (termed Sample Set 3), and the field-emplaced saltstone samples (termed Sample Set 9), and (2) to validate property values assumed for the Saltstone Disposal Facility (SDF) PA modeling. Themore » analysis and property data for Sample Set 9 (i.e. six core samples extracted from SDU Cell 2A (SDU2A)) are documented in this report, and where applicable, the results are compared to the results for Sample Set 3. Relevant properties to demonstrate the aforementioned objectives include bulk density, porosity, saturated hydraulic conductivity (SHC), and radionuclide leaching behavior.« less

The Global Ocean Data Assimilation Experiment (GODAE)

NASA Astrophysics Data System (ADS)

Le Traon, P.; Smith, N.

The Global Ocean Data Assimilation Experiment (GODAE) will conduct its main demonstration phase from 2003 to 2005. From 2003 to 2005, operational and research institutions from Australia, Japan, United States, United Kingdom, France and Norway will be performing global oceanic data assimilation and ocean forecast in order to provide regular and comprehensive descriptions of ocean fields such as temperature, salinity and currents at high temporal and spatial resolution. A central objective of GODAE is to provide an integrated description that combines remote sensing data, in-situ data and models through data assimilation. Climate and seasonal forecasting, navy applications, marine safety, fisheries, the offshore industry and management of shelf/coastal areas are among the expected beneficiaries of GODAE. The integrated description of the ocean that GODAE will provide will also be highly beneficial to the research community. An overview of GODAE will be given; we will detail the GODAE objectives and strategy and the way it is implemented as an international experiment. Results from first pre-operational or prototype systems will finally be shown.

Integrated active sensor system for real time vibration monitoring

PubMed Central

Liang, Qijie; Yan, Xiaoqin; Liao, Xinqin; Cao, Shiyao; Lu, Shengnan; Zheng, Xin; Zhang, Yue

2015-01-01

We report a self-powered, lightweight and cost-effective active sensor system for vibration monitoring with multiplexed operation based on contact electrification between sensor and detected objects. The as-fabricated sensor matrix is capable of monitoring and mapping the vibration state of large amounts of units. The monitoring contents include: on-off state, vibration frequency and vibration amplitude of each unit. The active sensor system delivers a detection range of 0–60 Hz, high accuracy (relative error below 0.42%), long-term stability (10000 cycles). On the time dimension, the sensor can provide the vibration process memory by recording the outputs of the sensor system in an extend period of time. Besides, the developed sensor system can realize detection under contact mode and non-contact mode. Its high performance is not sensitive to the shape or the conductivity of the detected object. With these features, the active sensor system has great potential in automatic control, remote operation, surveillance and security systems. PMID:26538293

World Culture Areas: Africa [And] U.S.S.R. Grade 6.

ERIC Educational Resources Information Center

Nevens, Margaret; And Others

Two social studies units for sixth grade provide information and learning activities about Africa and Russia. Both units contain lists of concepts to be learned, skills, objectives, learning activities, common misconceptions, vocabulary, maps, objective and essay tests, and bibliographies. The unit on Africa helps students understand the wide…

Vocational Agriculture I Basic Core. Section C--Supervised Experience Programs.

ERIC Educational Resources Information Center

Oklahoma State Board of Vocational and Technical Education, Stillwater. Curriculum and Instructional Materials Center.

This curriculum guide contains five units teaching preservice vocational teachers to conduct supervised experience programs. Each unit contains an objective (e.g., "After completing this unit, the student should be able to choose and plan supervised occupational experience programs"); specific objectives (e.g., "State reasons for…

Solar Energy Applications for Agriculture. A Curriculum Guide.

ERIC Educational Resources Information Center

Nebraska Univ., Lincoln. Dept. of Agricultural Education.

This curriculum guide contains five units for a course in solar energy applications for vocational agriculture. Each unit is organized in a format containing some or all of the following materials: unit objective, specific objectives, suggested instructor and student activities, list of instructional materials, assignment sheets, answers to…

A Model for Situation and Threat Assessment

DTIC Science & Technology

2006-12-01

CUBRC , Inc.) 8151 Needwood #T103 Derwood, MD 20855 UNITED STATES steinberg@cubrc.org A model is presented for situation and threat assessment...PERFORMING ORGANIZATION NAME(S) AND ADDRESS(ES) Subject Matter Expert (SME) Calspan-UB Research Center ( CUBRC , Inc.) 8151 Needwood #T103 Derwood, MD...1 A Model for Situation and Threat Assessment Alan Steinberg CUBRC , Inc. steinberg@cubrc.org November, 2005 2 Objectives • Advance the state-of

Laboratory Control for Wastewater Facilities, Wastewater Technology: A Two-Year Post High School Instructional Program. Volume III, Parts A, B, C, D, E, F, G.

ERIC Educational Resources Information Center

Wagner, David; And Others

This volume is one in a series which outlines performance objectives and instructional modules for a course of study which explains the relationship and function of the process units in a wastewater treatment plant. Examples of modules include measuring settleable matter, total solids, dissolved solids, suspended solids, and volatile solids. The…

Design and Demonstration of a 30 GHz 16-bit Superconductor RSFQ Microprocessor

DTIC Science & Technology

2015-03-10

for Public Release; Distribution Unlimited Final Report: Design and Demonstration of a 30 GHz 16-bit Superconductor RSFQ Microprocessor The views...P.O. Box 12211 Research Triangle Park, NC 27709-2211 Superconductor technology, RSFQ, RQL, processor design, arithmetic units, high-performance...Demonstration of a 30 GHz 16-bit Superconductor RSFQ Microprocessor Report Title The major objective of the project was to design and demonstrate operation

Multi-Objective Optimization of System Capability Satisficing in Defense Acquisition

DTIC Science & Technology

2012-01-01

of System Capability Satisficing in Defense Acquisition 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) 5d...PROJECT NUMBER 5e. TASK NUMBER 5f. WORK UNIT NUMBER 7. PERFORMING ORGANIZATION NAME(S) AND ADDRESS(ES) Stevens Institute of Technology,School of Systems...Report (SAR) 18. NUMBER OF PAGES 27 19a. NAME OF RESPONSIBLE PERSON a. REPORT unclassified b. ABSTRACT

Modification split type air conditioning unit by installing internal heat exchanger and condenser precooling

NASA Astrophysics Data System (ADS)

Ambarita, H.

2018-03-01

In this paper, a modified of air conditioning (AC) system is proposed. In the modified system, an internal heat exchanger and condenser precooling unit are installed. The objective is to explore the effect of the additional equipment to the performance of the system. An AC with compressor power of 1 PK is modified and compared with the original one. The results show that ER of the modified system is higher than the original one in order of 3.6%. The work of the compressor of the modified system is 12.5% lower than work of the compressor without modification. Finally, the COP of the modified system is 11.71% higher than the original one. These facts reveal that the combination of IHX and condenser precooling shows positive impact on the performance of the AC. It is recommended to use the modified system to improve the energy efficiency of the Air Conditioning system.

Use of Ancillary Tests When Determining Brain Death in Pediatric Patients in the United States.

PubMed

Lewis, Ariane; Adams, Nellie; Chopra, Arun; Kirschen, Matthew P

2017-10-01

Although pediatric brain death guidelines stipulate when ancillary testing should be used during brain death determination, little is known about the way these recommendations are implemented in clinical practice. We conducted a survey of pediatric intensivists and neurologists in the United States on the use of ancillary testing. Although most respondents noted they only performed an ancillary test if the clinical examination and apnea test could not be completed, 20% of 195 respondents performed an ancillary test for other reasons, including (1) to convince a family that objected to the brain death determination that a patient is truly dead (n = 21), (2) personal preference (n = 14), and (3) institutional requirement (n = 5). Our findings suggest that pediatricians use ancillary tests for a variety of reasons during brain death determination. Medical societies and governmental regulatory bodies must reinforce the need for homogeneity in practice.

Cascade Distillation Subsystem Development: Progress Toward a Distillation Comparison Test

NASA Technical Reports Server (NTRS)

Callahan, M. R.; Lubman, A.; Pickering, Karen D.

2009-01-01

Recovery of potable water from wastewater is essential for the success of long-duration manned missions to the Moon and Mars. Honeywell International and a team from NASA Johnson Space Center (JSC) are developing a wastewater processing subsystem that is based on centrifugal vacuum distillation. The wastewater processor, referred to as the Cascade Distillation Subsystem (CDS), utilizes an innovative and efficient multistage thermodynamic process to produce purified water. The rotary centrifugal design of the system also provides gas/liquid phase separation and liquid transport under microgravity conditions. A five-stage subsystem unit has been designed, built, delivered and integrated into the NASA JSC Advanced Water Recovery Systems Development Facility for performance testing. A major test objective of the project is to demonstrate the advancement of the CDS technology from the breadboard level to a subsystem level unit. An initial round of CDS performance testing was completed in fiscal year (FY) 2008. Based on FY08 testing, the system is now in development to support an Exploration Life Support (ELS) Project distillation comparison test expected to begin in early 2009. As part of the project objectives planned for FY09, the system will be reconfigured to support the ELS comparison test. The CDS will then be challenged with a series of human-gene-rated waste streams representative of those anticipated for a lunar outpost. This paper provides a description of the CDS technology, a status of the current project activities, and data on the system s performance to date.

Working Memory Units Are All in Your Head: Factors That Influence Whether Features or Objects Are the Favored Units

ERIC Educational Resources Information Center

Vergauwe, Evie; Cowan, Nelson

2015-01-01

We compared two contrasting hypotheses of how multifeatured objects are stored in visual working memory (vWM); as integrated objects or as independent features. A new procedure was devised to examine vWM representations of several concurrently held objects and their features and our main measure was reaction time (RT), allowing an examination of…

An economic analysis of payment for health care services: the United States and Switzerland compared.

PubMed

Zweifel, Peter; Tai-Seale, Ming

2009-06-01

This article seeks to assess whether physician payment reforms in the United States and Switzerland were likely to attain their objectives. We first introduce basic contract theory, with the organizing principle being the degree of information asymmetry between the patient and the health care provider. Depending on the degree of information asymmetry, different forms of payment induce "appropriate" behavior. These theoretical results are then pitted against the RBRVS of the United States to find that a number of its aspects are not optimal. We then turn to Switzerland's Tarmed and find that it fails to conform with the prescriptions of economic contract theory as well. The article closes with a review of possible reforms that could do away with uniform fee schedules to improve the performance of the health care system.

Optimal maintenance policy incorporating system level and unit level for mechanical systems

NASA Astrophysics Data System (ADS)

Duan, Chaoqun; Deng, Chao; Wang, Bingran

2018-04-01

The study works on a multi-level maintenance policy combining system level and unit level under soft and hard failure modes. The system experiences system-level preventive maintenance (SLPM) when the conditional reliability of entire system exceeds SLPM threshold, and also undergoes a two-level maintenance for each single unit, which is initiated when a single unit exceeds its preventive maintenance (PM) threshold, and the other is performed simultaneously the moment when any unit is going for maintenance. The units experience both periodic inspections and aperiodic inspections provided by failures of hard-type units. To model the practical situations, two types of economic dependence have been taken into account, which are set-up cost dependence and maintenance expertise dependence due to the same technology and tool/equipment can be utilised. The optimisation problem is formulated and solved in a semi-Markov decision process framework. The objective is to find the optimal system-level threshold and unit-level thresholds by minimising the long-run expected average cost per unit time. A formula for the mean residual life is derived for the proposed multi-level maintenance policy. The method is illustrated by a real case study of feed subsystem from a boring machine, and a comparison with other policies demonstrates the effectiveness of our approach.

Lunar base heat pump

NASA Technical Reports Server (NTRS)

Goldman, Jeffrey H.; Tetreault, R.; Fischbach, D.; Walker, D.

1994-01-01

A heat pump is a device which elevates the temperature of a heat flow by a means of an energy input. By doing this, the heat pump can cause heat to transfer faster from a warm region to a cool region, or it can cause heat to flow from a cool region to a warmer region. The second case is the one which finds vast commercial applications such as air conditioning, heating, and refrigeration. Aerospace applications of heat pumps include both cases. The NASA Johnson Space Center is currently developing a Life Support Systems Integration Facility (LSSIF, previously SIRF) to provide system-level integration, operational test experience, and performance data that will enable NASA to develop flight-certified hardware for future planetary missions. A high lift heat pump is a significant part of the TCS hardware development associated with the LSSIF. The high lift heat pump program discussed here is being performed in three phases. In Phase 1, the objective is to develop heat pump concepts for a lunar base, a lunar lander, and for a ground development unit for the SIRF. In Phase 2, the design of the SIRF ground test unit is being performed, including identification and evaluation of safety and reliability issues. In Phase 3, the SIRF unit will be manufactured, tested, and delivered to the NASA Johnson Space Center.

Unit: Charge, Inspection Pack, National Trial Print. Reference No. 214.

ERIC Educational Resources Information Center

Australian Science Education Project, Toorak, Victoria.

This physical science unit from the Australian Science Education Project (ASEP) focuses on electrostatics. After students complete the activities contained in the core of the unit, they have six optional activities to pursue: How do charged objects behave? (conductors, insulators, charged objects); What is blue? (formation of copper ion); Putting…

Abraham Lincoln--His Words and His World: a Unit Plan.

ERIC Educational Resources Information Center

Diamond, Ronald L.; Diamond, Linda W.

Planned for an eighth-grade classroom, this unit plan, consisting of 19 lesson plans on the topic of Abraham Lincoln, is based upon the fulfillment of 17 unit objectives. Each daily lesson plan specifies the following: lesson theme, learner objective, needed prerequisites, new vocabulary or terms, learning set/motivation, presentation of new…

Value Driven Outcomes (VDO): a pragmatic, modular, and extensible software framework for understanding and improving health care costs and outcomes

PubMed Central

Kawamoto, Kensaku; Martin, Cary J; Williams, Kip; Tu, Ming-Chieh; Park, Charlton G; Hunter, Cheri; Staes, Catherine J; Bray, Bruce E; Deshmukh, Vikrant G; Holbrook, Reid A; Morris, Scott J; Fedderson, Matthew B; Sletta, Amy; Turnbull, James; Mulvihill, Sean J; Crabtree, Gordon L; Entwistle, David E; McKenna, Quinn L; Strong, Michael B; Pendleton, Robert C; Lee, Vivian S

2015-01-01

Objective To develop expeditiously a pragmatic, modular, and extensible software framework for understanding and improving healthcare value (costs relative to outcomes). Materials and methods In 2012, a multidisciplinary team was assembled by the leadership of the University of Utah Health Sciences Center and charged with rapidly developing a pragmatic and actionable analytics framework for understanding and enhancing healthcare value. Based on an analysis of relevant prior work, a value analytics framework known as Value Driven Outcomes (VDO) was developed using an agile methodology. Evaluation consisted of measurement against project objectives, including implementation timeliness, system performance, completeness, accuracy, extensibility, adoption, satisfaction, and the ability to support value improvement. Results A modular, extensible framework was developed to allocate clinical care costs to individual patient encounters. For example, labor costs in a hospital unit are allocated to patients based on the hours they spent in the unit; actual medication acquisition costs are allocated to patients based on utilization; and radiology costs are allocated based on the minutes required for study performance. Relevant process and outcome measures are also available. A visualization layer facilitates the identification of value improvement opportunities, such as high-volume, high-cost case types with high variability in costs across providers. Initial implementation was completed within 6 months, and all project objectives were fulfilled. The framework has been improved iteratively and is now a foundational tool for delivering high-value care. Conclusions The framework described can be expeditiously implemented to provide a pragmatic, modular, and extensible approach to understanding and improving healthcare value. PMID:25324556

Undergraduate Drinking and Academic Performance: A Prospective Investigation With Objective Measures*

PubMed Central

Thombs, Dennis L.; Olds, R. Scott; Bondy, Susan J.; Winchell, Janice; Baliunas, Dolly; Rehm, Jürgen

2009-01-01

Objective: Findings from previous prospective research suggest the association between alcohol use and undergraduate academic performance is negligible. This study was designed to address weaknesses of the past research by relying on objective measures of both drinking and academic performance. Method: A prospective study was conducted with repeated measures of exposure to alcohol linked to institutional academic records. Alcohol data were collected in residence halls at a nonselective, midwestern, public university in the United States. A total of 659 first- and second-year undergraduate students were tracked over the course of 15-week semesters. Results: A statistically significant negative association with semester academic performance was found for different alcohol indicators: frequency of breath alcohol concentration (BrAC) above .08, mean BrAC, standard deviation, and maximum BrAC recorded. These associations remained statistically significant when controlled for sociodemographic variables and individual level confounders, but the effect sizes were relatively small with a contribution to explained variance of less than 1%. When additionally adjusted for residence hall building, all alcohol indicators no longer reached statistical significance (p ≥ .05). Conclusions: Consistent with past prospective research, the magnitude of the association between undergraduate alcohol use and academic performance is small when the effects of high school academic aptitude and performance are accounted for in multivariable analyses. This is the first study to find that living environment may have a robust effect on the academic achievement of undergraduates. Future research should examine more closely the relation between residence and academic performance and the role that alcohol use may play in creating residential environments. PMID:19737503

Model Verification and Validation Concepts for a Probabilistic Fracture Assessment Model to Predict Cracking of Knife Edge Seals in the Space Shuttle Main Engine High Pressure Oxidizer

NASA Technical Reports Server (NTRS)

Pai, Shantaram S.; Riha, David S.

2013-01-01

Physics-based models are routinely used to predict the performance of engineered systems to make decisions such as when to retire system components, how to extend the life of an aging system, or if a new design will be safe or available. Model verification and validation (V&V) is a process to establish credibility in model predictions. Ideally, carefully controlled validation experiments will be designed and performed to validate models or submodels. In reality, time and cost constraints limit experiments and even model development. This paper describes elements of model V&V during the development and application of a probabilistic fracture assessment model to predict cracking in space shuttle main engine high-pressure oxidizer turbopump knife-edge seals. The objective of this effort was to assess the probability of initiating and growing a crack to a specified failure length in specific flight units for different usage and inspection scenarios. The probabilistic fracture assessment model developed in this investigation combined a series of submodels describing the usage, temperature history, flutter tendencies, tooth stresses and numbers of cycles, fatigue cracking, nondestructive inspection, and finally the probability of failure. The analysis accounted for unit-to-unit variations in temperature, flutter limit state, flutter stress magnitude, and fatigue life properties. The investigation focused on the calculation of relative risk rather than absolute risk between the usage scenarios. Verification predictions were first performed for three units with known usage and cracking histories to establish credibility in the model predictions. Then, numerous predictions were performed for an assortment of operating units that had flown recently or that were projected for future flights. Calculations were performed using two NASA-developed software tools: NESSUS(Registered Trademark) for the probabilistic analysis, and NASGRO(Registered Trademark) for the fracture mechanics analysis. The goal of these predictions was to provide additional information to guide decisions on the potential of reusing existing and installed units prior to the new design certification.

The practical application of signal detection theory to image quality assessment in x-ray image intensifier-TV fluoroscopy.

PubMed

Marshall, N W

2001-06-01

This paper applies a published version of signal detection theory to x-ray image intensifier fluoroscopy data and compares the results with more conventional subjective image quality measures. An eight-bit digital framestore was used to acquire temporally contiguous frames of fluoroscopy data from which the modulation transfer function (MTF(u)) and noise power spectrum were established. These parameters were then combined to give detective quantum efficiency (DQE(u)) and used in conjunction with signal detection theory to calculate contrast-detail performance. DQE(u) was found to lie between 0.1 and 0.5 for a range of fluoroscopy systems. Two separate image quality experiments were then performed in order to assess the correspondence between the objective and subjective methods. First, image quality for a given fluoroscopy system was studied as a function of doserate using objective parameters and a standard subjective contrast-detail method. Following this, the two approaches were used to assess three different fluoroscopy units. Agreement between objective and subjective methods was good; doserate changes were modelled correctly while both methods ranked the three systems consistently.

Performance data for a desuperheater integrated to a thermal energy storage system

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lee, A.H.W.; Jones, J.W.

1995-11-01

Desuperheaters are heat exchangers that recover heat from the compressor discharge gas to heat domestic hot water. The objective of this project was to conduct performance tests for a desuperheater in the cooling and heating modes of a thermal energy storage system so as to form a data base on the steady state performance of a residential desuperheater unit. The desuperheater integrated to a thermal energy storage system was installed in the Dual-Air Loop Test Facility at The Center for Energy Studies, the University of Texas at Austin. The major components of the system consist of the refrigerant compressor, domesticmore » hot water (DHW) desuperheater, thermal storage tank with evaporator/condenser coil, outdoor air coil, DHW storage tank, DHW circulating pump, space conditioning water circulation pump, and indoor heat exchanger. Although measurements were made to quantity space heating, space cooling, and domestic water heating, this paper only emphasizes the desuperheater performance of the unit. Experiments were conducted to study the effects of various outdoor temperature and entering water temperature on the performance of the desuperheater/TES system. In the cooling and heating modes, the desuperheater captured 5 to 18 percent and 8 to 17 percent, respectively, of the heat that would be normally rejected through the air coil condenser. At higher outdoor temperature, the desuperheater captured more heat. it was also noted that the heating and cooling COPs decreased with entering water temperature. The information generated in the experimental efforts could be used to form a data base on the steady state performance of a residential desuperheater unit.« less

Study of Vermont: A Curriculum Designed for Grades 4-6.

ERIC Educational Resources Information Center

Dubuque, Martha L.

Designed for use in grades 4-6, this guide consists of four basic units related to the study of Vermont: Indian Civilization, Vermont History, Geography and Economics, and Cities and Towns. Each unit lists key concepts, content objectives, skills objectives, and related objectives. Next, specialized vocabulary as well as common, essential…

Curriculum Guide for Teachers of Educable Mentally Retarded -- Junior-Senior.

ERIC Educational Resources Information Center

Palm Beach County Board of Public Instruction, West Palm Beach, FL.

General behavioral objectives are listed for both junior and senior high level educables; unit and lesson plans on job safety and budgeting are provided; a unit on voice and diction is included. Over half of the document presents behavioral objectives, arranged according to general objectives, and lists terminal behavior, communicative and…

Thermoelectric Power Generation Utilizing the Waste Heat from a Biomass Boiler

NASA Astrophysics Data System (ADS)

Brazdil, Marian; Pospisil, Jiri

2013-07-01

The objective of the presented work is to test the possibility of using thermoelectric power to convert flue gas waste heat from a small-scale domestic pellet boiler, and to assess the influence of a thermoelectric generator on its function. A prototype of the generator, able to be connected to an existing device, was designed, constructed, and tested. The performance of the generator as well as the impact of the generator on the operation of the boiler was investigated under various operating conditions. The boiler gained auxiliary power and could become a combined heat and power unit allowing self-sufficient operation. The created unit represents an independent source of electricity with effective use of fuel.

A photovoltaic industry overview - The results of a survey on photovoltaic technology industrialization

NASA Technical Reports Server (NTRS)

Ferber, R. R.; Costogue, E. N.; Thornhill, J. W.; Shimada, K.

1981-01-01

The National Photovoltaics Program of the United States Department of Energy has the objective of bringing photovoltaic power systems to a point where they can supply a significant portion of the United States energy requirements by the year 2000. This is planned to be accomplished through substantial research and technology development activities aimed at achieving major cost reductions and market penetration. This paper presents information derived from a limited survey performed to obtain photovoltaic industry attitudes concerning industrialization, and to determine current industry plans to meet the DOE program goals. Silicon material production, a key photovoltaic manufacturing industry, is highlighted with regards to implementation of technology improvement and silicon material supply outlook.

System for conversion between the boundary representation model and a constructive solid geometry model of an object

DOEpatents

Christensen, Noel C.; Emery, James D.; Smith, Maurice L.

1988-04-05

A system converts from the boundary representation of an object to the constructive solid geometry representation thereof. The system converts the boundary representation of the object into elemental atomic geometrical units or I-bodies which are in the shape of stock primitives or regularized intersections of stock primitives. These elemental atomic geometrical units are then represented in symbolic form. The symbolic representations of the elemental atomic geometrical units are then assembled heuristically to form a constructive solid geometry representation of the object usable for manufacturing thereof. Artificial intelligence is used to determine the best constructive solid geometry representation from the boundary representation of the object. Heuristic criteria are adapted to the manufacturing environment for which the device is to be utilized. The surface finish, tolerance, and other information associated with each surface of the boundary representation of the object are mapped onto the constructive solid geometry representation of the object to produce an enhanced solid geometry representation, particularly useful for computer-aided manufacture of the object.

Educational Intervention on Delirium Assessment Using Confusion Assessment Method-ICU (CAM-ICU) in a General Intensive Care Unit.

PubMed

Ramoo, Vimala; Abu, Harlinna; Rai, Vineya; Surat Singh, Surindar Kaur; Baharudin, Ayuni Asma'; Danaee, Mahmoud; Thinagaran, Raveena Rajalachimi R

2018-05-18

The primary objective was to assess intensive care unit nurses' knowledge of intensive care unit delirium and delirium assessment before and after an educational intervention. In addition, nurses' perception on the usefulness of a delirium assessment tool and barriers against delirium assessment were assessed as secondary objectives. Early identification of delirium in intensive care units is crucial for patient care. Hence, nurses require adequate knowledge to enable appropriate evaluation of delirium using standardised practice and assessment tools. This study, performed in Malaysia, used a single group pretest-posttest study design to assess the effect of educational interventions and hands-on practices on nurses' knowledge of intensive care unit delirium and delirium assessment. Sixty-one nurses participated in educational intervention sessions, including classroom learning, demonstrations, and hands-on practices on the Confusion Assessment Method-Intensive Care Unit. Data were collected using self-administered questionnaires for the pre- and post-intervention assessments. Analysis to determine the effect of the educational intervention consisted of the repeated-measures analysis of covariance. There were significant differences in the knowledge scores pre- and post-intervention, after controlling for demographic characteristics. The two most common perceived barriers to the adoption of the intensive care unit delirium assessment tool were "physicians did not use nurses' delirium assessment in decision making" and "difficult to interpret delirium in intubated patients". Educational intervention and hands-on practices increased nurses' knowledge of delirium assessment. Teaching and inter-professional involvements are essential for a successful implementation of intensive care unit delirium assessment practice. This study supports existing evidences, indicating that education and training could increase nurses' knowledge of delirium and delirium assessment. Improving nurses' knowledge could potentially lead to better delirium management practice and improve ICU patient care. Thus, continuous efforts to improve and sustain nurses' knowledge become relevant in ICU settings. This article is protected by copyright. All rights reserved. This article is protected by copyright. All rights reserved.

Army National Guard Medical Readiness Training Exercises in Southern Command

DTIC Science & Technology

1994-06-03

pulled , the number of people in a health education class, or the number of procedures performed in order to assess the success of the program...the dental set was configured for general dentistry, but the missions often entailed pulling teeth rather than restoration of teeth. The staff...participating units’ level would benefit the academic world and may reveal valuable clues as to how to modify the program. The goali and objectives

Magnetic Resonance Spectroscopy: An Objective Technique for the Quantification of Prostate Cancer Pathologies

DTIC Science & Technology

2007-02-01

5d. PROJECT NUMBER Leo L. Cheng, Ph.D. 5e. TASK NUMBER 5f. WORK UNIT NUMBER 7. PERFORMING ORGANIZATION NAME(S...Scott RM, Anthony DC, Gonzalez RG, Black PM. Biochemical characterization of pediatric brain tumors by using in vivo and ex vivo magnetic resonance...Biochemical characterization of pediatric brain tumors by using in vivo and ex vivo magnetic resonance spectroscopy. J Neurosurg 2002;96: 1023–1031. 7

Advanced Waste Treatment, Wastewater Technology: A Two-Year Post High School Instructional Program. An Instructor's Guide for Use of Instructional Material in Wastewater Technology Training Programs. Volume VI.

ERIC Educational Resources Information Center

Gearheart, Robert A.; And Others

This document is one in a series which outlines performance objectives and instructional modules for a course of study which explains the relationship and functions of the process units in a wastewater treatment plant. The modules are arranged in order appropriate for teaching students with no experience. The modules can also be rearranged and…

Integrated Advanced Microwave Sounding Unit-A(AMSU-A). Engineering Test Report: METSAT A1 Signal Processor, (P/N 1331670-2, S /N F05)

NASA Technical Reports Server (NTRS)

Lund, D.

1998-01-01

This report presents a description of the tests performed, and the test data, for the AI METSAT Signal Processor Assembly P/N 1331670-2, S/N F05. The assembly was tested in accordance with AE-26754, "METSAT Signal Processor Scan Drive and Integration Procedure." The objective is to demonstrate functionality of the signal processor prior to instrument integration.

Integrated Advanced Microwave Sounding Unit-A (AMSU-A). Engineering Test Report: METSAT A1 Signal Processor (P/N 1331670-2, S/N F03)

NASA Technical Reports Server (NTRS)

Lund, D.

1998-01-01

This report presents a description of tests performed, and the test data, for the A1 METSAT Signal Processor Assembly PN: 1331679-2, S/N F03. This assembly was tested in accordance with AE-26754, "METSAT Signal Processor Scan Drive Test and Integration Procedure." The objective is to demonstrate functionality of the signal processor prior to instrument integration.

Early Exercise in the Burn Intensive Care Unit Decreases Hospital Stay, Improves Mental Health, and Physical Performance

DTIC Science & Technology

2015-10-01

Introduction 4 2. Keywords 4 3. Accomplishments 4 4. Impact 6 5. Changes/Problems 8 6. Products 10 7. Participants & Other Collaborating...to accomplish the goals and objectives. 4. IMPACT : Describe distinctive contributions, major accomplishments, innovations...successes, or any change in practice or behavior that has come about as a result of the project relative to: What was the impact on the development

Picking Parts Out of a Bin,

DTIC Science & Technology

1983-10-01

AD-A39257 PICKING PARS OUOF A BN(U)MASSACHUSETTS INS OF 1/ TECH CAMBRIDOE ARTIFCIAL INTELLGENCE LAB HIORNET AL OCT 830 AIM-465N00014-7C-0389 UNCLA$T...0505 S. PERFORMING ORGANIZATION NAME AND ADDRESS 10. PROGRAM ELEMENT. PROJECT. TASK Artificial Intelligence Laboratory AREA A WORK UNIT NUMBERS 545...types of objects. I Massachusetts Institute of Technology Artificial Intelligence Laboratory A.I. Memo No. 746 October, 1983 Picking Parts out of a Bin

Developing Headquarters Guidance for Army Installation Sustainability Plans in 2007

DTIC Science & Technology

2009-01-01

Make a charitable contribution Support RAND This PDF document was made available from www.rand.org as a public service of the RAND Corporation . Jump...down to document The RAND Corporation is a nonprofit research organization providing objective analysis and effective solutions that address the...6. AUTHOR(S) 5d. PROJECT NUMBER 5e. TASK NUMBER 5f. WORK UNIT NUMBER 7. PERFORMING ORGANIZATION NAME(S) AND ADDRESS(ES) RAND Corporation ,1776 Main

Saturn Apollo Program

NASA Image and Video Library

1968-01-01

AS-204, the fourth Saturn IB launch vehicle, developed by the Marshall Space Flight Center (MSFC), awaits its January 22, 1968 liftoff from Cape Canaveral, Florida for the unmarned Apollo 5 mission. Primary mission objectives included the verification of the Apollo Lunar Module's (LM) ascent and descent propulsion systems and an evaluation of the S-IVB stage instrument unit performance. In all, nine Saturn IB flights were made, ending with the Apollo-Soyuz Test Project in July 1975.

Air Power Against Terror: America’s Conduct of Operation Enduring Freedom

DTIC Science & Technology

2005-01-01

Institute View document details For More Information This PDF document was made available from www.rand.org as a public service of the RAND Corporation ...WORKFORCE AND WORKPLACE The RAND Corporation is a nonprofit research organization providing objective analysis and effective solutions that address the...WORK UNIT NUMBER 7. PERFORMING ORGANIZATION NAME(S) AND ADDRESS(ES) Rand Corporation ,1776 Main Street,PO Box 2138,Santa Monica,CA,90407-2138 8

Focal ratio degradation in lightly fused hexabundles

NASA Astrophysics Data System (ADS)

Bryant, J. J.; Bland-Hawthorn, J.; Fogarty, L. M. R.; Lawrence, J. S.; Croom, S. M.

2014-02-01

We are now moving into an era where multi-object wide-field surveys, which traditionally use single fibres to observe many targets simultaneously, can exploit compact integral field units (IFUs) in place of single fibres. Current multi-object integral field instruments such as Sydney-AAO Multi-object Integral field spectrograph have driven the development of new imaging fibre bundles (hexabundles) for multi-object spectrographs. We have characterized the performance of hexabundles with different cladding thicknesses and compared them to that of the same type of bare fibre, across the range of fill fractions and input f-ratios likely in an IFU instrument. Hexabundles with 7-cores and 61-cores were tested for focal ratio degradation (FRD), throughput and cross-talk when fed with inputs from F/3.4 to >F/8. The five 7-core bundles have cladding thickness ranging from 1 to 8 μm, and the 61-core bundles have 5 μm cladding. As expected, the FRD improves as the input focal ratio decreases. We find that the FRD and throughput of the cores in the hexabundles match the performance of single fibres of the same material at low input f-ratios. The performance results presented can be used to set a limit on the f-ratio of a system based on the maximum loss allowable for a planned instrument. Our results confirm that hexabundles are a successful alternative for fibre imaging devices for multi-object spectroscopy on wide-field telescopes and have prompted further development of hexabundle designs with hexagonal packing and square cores.

War and Peace. Grade Twelve. [Resource Unit VI.] Project Social Studies.

ERIC Educational Resources Information Center

Minnesota Univ., Minneapolis. Project Social Studies Curriculum Center.

This is the sixth of seven resource units for a twelfth grade course on value conflicts and policy decisions. The topic for this unit is war and peace. The objectives are listed as to generalizations, skills, and values. The double-page format related objectives to pertinent content, teaching procedures, and instructional materials. This unit…

The Pause--That Sells. Capsule I, II, and III. Teacher's Guide [and] Student Materials.

ERIC Educational Resources Information Center

Wiley, Liz

This document provides teaching guidelines, objectives, and student activities for a three-part television advertising unit intended for use in a fourth grade consumer economics program. Major objectives of the unit are to help students look critically at television commercials. Each part of the unit requires from four to six hours of classroom…

PROPULSE 980: A Hydrogen Peroxide Enrichment System

NASA Technical Reports Server (NTRS)

Boxwell, Robert; Bromley, G.; Wanger, Robert; Pauls, Dan; Maynard, Bryon; McNeal, Curtis; Dumbacher, D. L. (Technical Monitor)

2000-01-01

The PROPULSE 980 unit is a transportable processing plant that enriches aerospace grade hydrogen peroxide from 90% to 98% final concentration. The unit was developed by Degussa-H Is, in cooperation with Orbital, NASA Marshall Space Center, and NASA Stennis Space Center. The system is a self-contained unit that houses all of the process equipment, instrumentation and controls to perform the concentration operation nearly autonomously. It is designed to produce non-bulk quantities of 98% hydrogen peroxide. The enrichment unit design also maintains system, personnel and environmental safety during all aspects of the enrichment process and final product storage. As part of the Propulse 980 checkout and final buyoff, it will be disassembled at the Degussa-H Is Corporation plant in Theodore, AL, transported to the Stennis Space Center, reassembled and subjected to a series of checkout tests to verify design objectives have been met. This paper will summarize the basic project elements and provide an update on the present status of the project.

The role of community acceptance over time for costs of HIV and STI prevention interventions: analysis of the Masaka Intervention Trial, Uganda, 1996-1999.

PubMed

Terris-Prestholt, Fern; Kumaranayake, Lilani; Foster, Susan; Kamali, Anatoli; Kinsman, John; Basajja, Vincent; Nalweyso, Nora; Quigley, Maria; Kengeya-Kayondo, Jane; Whitworth, James

2006-10-01

The objective of this study is to estimate the annual costs of information, education, and communication (IEC), both community- and school-based; strengthened public and private sexually transmitted infections treatment; condom social marketing (CSM); and voluntary counseling and testing (VCT) implemented in Masaka, Uganda, over 4 years, and to explore how unit costs change with varying population use/uptake. Total economic provider's costs and intervention outputs were collected annually to estimate annual unit costs between 1996 and 1999. In early intervention years, uptake of all activities grew dramatically and continued to grow for public STI treatment, CSM, and VCT. Attendance at IEC performances started to drop in year 4. Unit costs dropped rapidly with increasing uptake of and participation in interventions. When implementing long-term community-based interventions, it is important to take into account that it takes time for communities to scale up their participation, since this can lead to large variations in unit costs.

A variable stiffness dielectric elastomer actuator based on electrostatic chucking.

PubMed

Imamura, Hiroya; Kadooka, Kevin; Taya, Minoru

2017-05-14

Dielectric elastomer actuators (DEA) are one type of promising artificial muscle; however, applications of bending-type DEA for robotic end-effectors may be limited by their low stiffness and ability to resist external loads without buckling. Unimorph DEA can produce large out-of-plane deformation suitable for use as robotic end effectors; however, design of such actuators for large displacement comes at the cost of low stiffness and blocking force. This work proposes and demonstrates a variable stiffness dielectric elastomer actuator (VSDEA) consisting of a plurality of unimorph DEA units operating in parallel, which can exhibit variable electrostatic chucking to modulate the structure's bending stiffness. The unimorph DEA units are additively manufactured using a high-resolution pneumatic dispenser, and VSDEA comprising various numbers of units are assembled. The performance of the DEA units and VSDEA are compared to model predictions, exhibiting a maximum stiffness change of 39.2×. A claw actuator comprising two VSDEA and weighing 0.6 grams is demonstrated grasping and lifting a 10 gram object.

Piloting an information literacy program for staff nurses: lessons learned.

PubMed

Rosenfeld, Peri; Salazar-Riera, Noraliza; Vieira, Dorice

2002-01-01

Intrinsic to all models of evidence-based practice is the need for information literacy and the critical assessment of information. As part of a house-wide evidence-based practice initiative, the objective of this pilot project was to develop the information literacy skills of staff nurses to increase their ability to find and assess available electronic resources for clinical decision making. An intensive care unit was chosen to pilot a unit-based approach to educate staff nurses to perform patient care-related electronic literature searches. An additional goal was to determine the effectiveness of unit-based training sessions on the frequency and quality of electronic literature searches by participating nurses. In addition to the unit-based instruction, nursing and library staff collaborated to develop a Web-based tutorial to supplement and reinforce the content of the training sessions. A pretest-post-test design was used to evaluate the initiative and to assess the effect of the educational intervention over time. Among the lessons learned from this pilot study was that unit-based instruction presents significant obstacles for effective learning of new technological skills for staff nurses.

Assessing organizational performance in intensive care units: a French experience.

PubMed

Minvielle, Etienne; Aegerter, Philippe; Dervaux, Benoît; Boumendil, Ariane; Retbi, Aurélia; Jars-Guincestre, Marie Claude; Guidet, Bertrand

2008-06-01

The objective of the study was to assess and to explain variation of organizational performance in intensive care units (ICUs). This was a prospective multicenter study. The study involved 26 ICUs located in the Paris area, France, participating in a regional database. Data were collected through answers of 1000 ICU personnel to the Culture, Organization, and Management in Intensive Care questionnaire and from the database. Organizational performance was assessed through a composite score related to 5 dimensions: coordination and adaptation to uncertainty, communication, conflict management, organizational change, and organizational learning, Skills developed in relationship with patients and their families. Statistical comparisons between ICUs were performed by analysis of variance with a Scheffé pairwise procedure. A multilevel regression model was used to analyze both individual and structural variables explaining differences of ICU's organizational performance. The organizational performance score differed among ICUs. Some cultural values were negatively correlated with a high level of organizational performance, suggesting improvement potential. Several individual and structural factors were also related to the quality of ICU organization, including absence of burnout, older staff, satisfaction to work, and high workload (P < .02 for each). A benchmarking approach can be used by ICU managers to assess the organizational performance of their ICU based on a validated questionnaire. Differences are mainly explained by cultural values and individual well-being factors, introducing new requirements for managing human resources in ICUs.

12 CFR 563.80 - Borrowing limitations.

Code of Federal Regulations, 2010 CFR

2010-01-01

... by the United States or any agency or fund of the United States. (e) Filing requirements for outside... days after receipt of such filing to object to the issuance of such securities. The OTS shall object if...

Differences in self-reported physical limitation among older women and men in Ismailia, Egypt.

PubMed

Khadr, Zeinab; Yount, Kathryn

2012-09-01

This study explores the reasons for gender differences in self-reported physical limitation among older adults in Ismailia, Egypt. 435 women and 448 men, 50 years and older in Ismailia, Egypt, participated in a social survey and tests of physical performance. Ordered logit models were estimated to compare unadjusted gender differences in reported disability with these differences adjusted sequentially for (a) age and objective measures of physical performance, (b) self-reported morbidities and health care use, and (c) social and economic attributes. Compared with men, women more often reported higher levels of limitation in activities of daily living (ADLs), upper-extremity range of motion (ROM), and lower-extremity gross mobility (GM). Adjusting for age and objective measures of physical performance, women and men had similar odds of self-reporting difficulty with ADLs. With sequential adjustments for the remaining variables, women maintained significantly higher odds of self-reported difficulty with upper-extremity ROM and lower-extremity GM. Cross-culturally, gender differences in self-reported disability may arise from objective and subjective perceptions of disability. Collectively, these results and those from prior studies in Bangladesh and the United States suggest that gender gaps in self-reported physical limitation may be associated with the degree of gender equality in society.

Assessing fundamental motor skills in Belgian children aged 3-8 years highlights differences to US reference sample.

PubMed

Bardid, Farid; Huyben, Floris; Lenoir, Matthieu; Seghers, Jan; De Martelaer, Kristine; Goodway, Jacqueline D; Deconinck, Frederik J A

2016-06-01

This study aimed to understand the fundamental motor skills (FMS) of Belgian children using the process-oriented Test of Gross Motor Development, Second Edition (TGMD-2) and to investigate the suitability of using the United States (USA) test norms in Belgium. FMS were assessed using the TGMD-2. Gender, age and motor performance were examined in 1614 Belgian children aged 3-8 years (52.1% boys) and compared with the US reference sample. More proficient FMS performance was found with increasing age, from 3 to 6 years for locomotor skills and 3 to 7 years for object control skills. Gender differences were observed in object control skills, with boys performing better than girls. In general, Belgian children had lower levels of motor competence than the US reference sample, specifically for object control skills. The score distribution of the Belgian sample was skewed, with 37.4% scoring below average and only 6.9% scoring above average. This study supported the usefulness of the TGMD-2 as a process-oriented instrument to measure gross motor development in early childhood in Belgium. However, it also demonstrated that caution is warranted when using the US reference norms. ©2016 Foundation Acta Paediatrica. Published by John Wiley & Sons Ltd.

Identification of fuel cycle simulator functionalities for analysis of transition to a new fuel cycle

DOE PAGES

Brown, Nicholas R.; Carlsen, Brett W.; Dixon, Brent W.; ...

2016-06-09

Dynamic fuel cycle simulation tools are intended to model holistic transient nuclear fuel cycle scenarios. As with all simulation tools, fuel cycle simulators require verification through unit tests, benchmark cases, and integral tests. Model validation is a vital aspect as well. Although compara-tive studies have been performed, there is no comprehensive unit test and benchmark library for fuel cycle simulator tools. The objective of this paper is to identify the must test functionalities of a fuel cycle simulator tool within the context of specific problems of interest to the Fuel Cycle Options Campaign within the U.S. Department of Energy smore » Office of Nuclear Energy. The approach in this paper identifies the features needed to cover the range of promising fuel cycle options identified in the DOE-NE Fuel Cycle Evaluation and Screening (E&S) and categorizes these features to facilitate prioritization. Features were categorized as essential functions, integrating features, and exemplary capabilities. One objective of this paper is to propose a library of unit tests applicable to each of the essential functions. Another underlying motivation for this paper is to encourage an international dialog on the functionalities and standard test methods for fuel cycle simulator tools.« less

Tele-Autonomous control involving contact. Final Report Thesis; [object localization

NASA Technical Reports Server (NTRS)

Shao, Lejun; Volz, Richard A.; Conway, Lynn; Walker, Michael W.

1990-01-01

Object localization and its application in tele-autonomous systems are studied. Two object localization algorithms are presented together with the methods of extracting several important types of object features. The first algorithm is based on line-segment to line-segment matching. Line range sensors are used to extract line-segment features from an object. The extracted features are matched to corresponding model features to compute the location of the object. The inputs of the second algorithm are not limited only to the line features. Featured points (point to point matching) and featured unit direction vectors (vector to vector matching) can also be used as the inputs of the algorithm, and there is no upper limit on the number of the features inputed. The algorithm will allow the use of redundant features to find a better solution. The algorithm uses dual number quaternions to represent the position and orientation of an object and uses the least squares optimization method to find an optimal solution for the object's location. The advantage of using this representation is that the method solves for the location estimation by minimizing a single cost function associated with the sum of the orientation and position errors and thus has a better performance on the estimation, both in accuracy and speed, than that of other similar algorithms. The difficulties when the operator is controlling a remote robot to perform manipulation tasks are also discussed. The main problems facing the operator are time delays on the signal transmission and the uncertainties of the remote environment. How object localization techniques can be used together with other techniques such as predictor display and time desynchronization to help to overcome these difficulties are then discussed.

Summary of Recent Research Accomplishment Onboard the International Space Station—Within the United States Orbital Segment

NASA Astrophysics Data System (ADS)

Jules, Kenol; Istasse, Eric; Stenuit, Hilde; Murakami, Keiji; Yoshizaki, Izumi; Johnson-Green, Perry

2011-06-01

November 20, 2010, marked a significant milestone in the annals of human endeavors in space since it was the twelfth anniversary of one of the most challenging and complex construction projects ever attempted by humans away from our planet: The construction of the International Space Stations. On November 20, 1998, the Zarya Control Module was launched. With this simple, almost unnoticed launch in the science community, the construction of a continuously staffed research platform, in Low Earth Orbit, was underway. This paper discusses the research that was performed by many occupants of this research platform during the year celebrating its twelfth anniversary. The main objectives of this paper are fourfold: (1) to discuss the integrated manner in which science planning/replanning and prioritization during the execution phase of an increment is carried out across the United States Orbital Segment since that segment is made of four independent space agencies; (2) to discuss and summarize the research that was performed during increments 16 and 17 (October 2007 to October 2008). The discussion for these two increments is primarily focused on the main objectives of each investigation and its associated hypotheses that were investigated. Whenever available and approved, preliminary research results are also discussed for each of the investigations performed during these two increments; (3) to compare the planned research portfolio for these two increments versus what was actually accomplished during the execution phase in order to discuss the challenges associated with planning and performing research in a space laboratory located over 240 miles up in space, away from the ground support team; (4) to briefly touch on the research portfolio of increments 18 and 19/20 as the International Space Station begins its next decade in Low Earth Orbit.

STS-61 Space Shuttle mission report

NASA Technical Reports Server (NTRS)

Fricke, Robert W., Jr.

1994-01-01

The STS-61 Space Shuttle Program Mission Report summarizes the Hubble Space Telescope (HST) servicing mission as well as the Orbiter, External Tank (ET), Solid Rocket Booster (SRB), Redesigned Solid Rocket Motor (RSRM), and the Space Shuttle main engine (SSME) systems performance during the fifty-ninth flight of the Space Shuttle Program and fifth flight of the Orbiter vehicle Endeavour (OV-105). In addition to the Orbiter, the flight vehicle consisted of an ET designated as ET-60; three SSME's which were designated as serial numbers 2019, 2033, and 2017 in positions 1, 2, and 3, respectively; and two SRB's which were designated BI-063. The RSRM's that were installed in each SRB were designated as 360L023A (lightweight) for the left SRB, and 360L023B (lightweight) for the right SRB. This STS-61 Space Shuttle Program Mission Report fulfills the Space Shuttle Program requirement as documented in NSTS 07700, Volume 8, Appendix E. That document requires that each major organizational element supporting the Program report the results of its hardware evaluation and mission performance plus identify all related in-flight anomalies. The primary objective of the STS-61 mission was to perform the first on-orbit servicing of the Hubble Space Telescope. The servicing tasks included the installation of new solar arrays, replacement of the Wide Field/Planetary Camera I (WF/PC I) with WF/PC II, replacement of the High Speed Photometer (HSP) with the Corrective Optics Space Telescope Axial Replacement (COSTAR), replacement of rate sensing units (RSU's) and electronic control units (ECU's), installation of new magnetic sensing systems and fuse plugs, and the repair of the Goddard High Resolution Spectrometer (GHRS). Secondary objectives were to perform the requirements of the IMAX Cargo Bay Camera (ICBC), the IMAX Camera, and the Air Force Maui Optical Site (AMOS) Calibration Test.

Accuracy, repeatability, and reproducibility of Artemis very high-frequency digital ultrasound arc-scan lateral dimension measurements

PubMed Central

Reinstein, Dan Z.; Archer, Timothy J.; Silverman, Ronald H.; Coleman, D. Jackson

2008-01-01

Purpose To determine the accuracy, repeatability, and reproducibility of measurement of lateral dimensions using the Artemis (Ultralink LLC) very high-frequency (VHF) digital ultrasound (US) arc scanner. Setting London Vision Clinic, London, United Kingdom. Methods A test object was measured first with a micrometer and then with the Artemis arc scanner. Five sets of 10 consecutive B-scans of the test object were performed with the scanner. The test object was removed from the system between each scan set. One expert observer and one newly trained observer separately measured the lateral dimension of the test object. Two-factor analysis of variance was performed. The accuracy was calculated as the average bias of the scan set averages. The repeatability and reproducibility coefficients were calculated. The coefficient of variation (CV) was calculated for repeatability and reproducibility. Results The test object was measured to be 10.80 mm wide. The mean lateral dimension bias was 0.00 mm. The repeatability coefficient was 0.114 mm. The reproducibility coefficient was 0.026 mm. The repeatability CV was 0.38%, and the reproducibility CV was 0.09%. There was no statistically significant variation between observers (P = .0965). There was a statistically significant variation between scan sets (P = .0036) attributed to minor vertical changes in the alignment of the test object between consecutive scan sets. Conclusion The Artemis VHF digital US arc scanner obtained accurate, repeatable, and reproducible measurements of lateral dimensions of the size commonly found in the anterior segment. PMID:17081860

System and method for disrupting suspect objects

DOEpatents

Gladwell, T. Scott; Garretson, Justin R; Hobart, Clinton G; Monda, Mark J

2013-07-09

A system and method for disrupting at least one component of a suspect object is provided. The system includes a source for passing radiation through the suspect object, a screen for receiving the radiation passing through the suspect object and generating at least one image therefrom, a weapon having a discharge deployable therefrom, and a targeting unit. The targeting unit displays the image(s) of the suspect object and aims the weapon at a disruption point on the displayed image such that the weapon may be positioned to deploy the discharge at the disruption point whereby the suspect object is disabled.

Design and experimental validation of novel 3D optical scanner with zoom lens unit

NASA Astrophysics Data System (ADS)

Huang, Jyun-Cheng; Liu, Chien-Sheng; Chiang, Pei-Ju; Hsu, Wei-Yan; Liu, Jian-Liang; Huang, Bai-Hao; Lin, Shao-Ru

2017-10-01

Optical scanners play a key role in many three-dimensional (3D) printing and CAD/CAM applications. However, existing optical scanners are generally designed to provide either a wide scanning area or a high 3D reconstruction accuracy from a lens with a fixed focal length. In the former case, the scanning area is increased at the expense of the reconstruction accuracy, while in the latter case, the reconstruction performance is improved at the expense of a more limited scanning range. In other words, existing optical scanners compromise between the scanning area and the reconstruction accuracy. Accordingly, the present study proposes a new scanning system including a zoom-lens unit, which combines both a wide scanning area and a high 3D reconstruction accuracy. In the proposed approach, the object is scanned initially under a suitable low-magnification setting for the object size (setting 1), resulting in a wide scanning area but a poor reconstruction resolution in complicated regions of the object. The complicated regions of the object are then rescanned under a high-magnification setting (setting 2) in order to improve the accuracy of the original reconstruction results. Finally, the models reconstructed after each scanning pass are combined to obtain the final reconstructed 3D shape of the object. The feasibility of the proposed method is demonstrated experimentally using a laboratory-built prototype. It is shown that the scanner has a high reconstruction accuracy over a large scanning area. In other words, the proposed optical scanner has significant potential for 3D engineering applications.

Prediction of Human Activity by Discovering Temporal Sequence Patterns.

PubMed

Li, Kang; Fu, Yun

2014-08-01

Early prediction of ongoing human activity has become more valuable in a large variety of time-critical applications. To build an effective representation for prediction, human activities can be characterized by a complex temporal composition of constituent simple actions and interacting objects. Different from early detection on short-duration simple actions, we propose a novel framework for long -duration complex activity prediction by discovering three key aspects of activity: Causality, Context-cue, and Predictability. The major contributions of our work include: (1) a general framework is proposed to systematically address the problem of complex activity prediction by mining temporal sequence patterns; (2) probabilistic suffix tree (PST) is introduced to model causal relationships between constituent actions, where both large and small order Markov dependencies between action units are captured; (3) the context-cue, especially interactive objects information, is modeled through sequential pattern mining (SPM), where a series of action and object co-occurrence are encoded as a complex symbolic sequence; (4) we also present a predictive accumulative function (PAF) to depict the predictability of each kind of activity. The effectiveness of our approach is evaluated on two experimental scenarios with two data sets for each: action-only prediction and context-aware prediction. Our method achieves superior performance for predicting global activity classes and local action units.

Historical Delineation of Landscape Units Using Physical Geographic Characteristics and Land Use/Cover Change

NASA Astrophysics Data System (ADS)

Campos-Campos, Oswaldo; Cruz-Cárdenas, Gustavo; Aquino, Roque Juan Carrasco; Moncayo-Estrada, Rodrigo; Machuca, Martha Alicia Velázquez; Meléndez, Luis Arturo Ávila

2018-03-01

Landscape units are conceived as a part of the territory that share similar physical and geographic characteristics. Their delineation can contribute to identify the physical and social dynamics that emerge in the spatial environment and to propose strategies of planning and management of the territory. The main objective was to make a historical delineation of landscape units in the Duero river basin that demonstrate the dynamics of changes in the territory, the description of the actors involved, and the affectations in the natural and social environment. We analyzed the vegetation change and urban growth from 1983 to 2014, incorporating climatic, edaphic, and topographic variables. A Principal Component Analysis was performed with the information and results were used in Maximum Likelihood procedure to define different clusters based on environmental characteristics. We defined five categories from the Landsat images. Results showed landscape units with homogeneous environmental characteristics and some differences in the units' delineation were mainly influenced by political and socioeconomic factors. Temporally there was an increased tendency of landscape units, three in 1983, nine in 1990, 1995, 2000 and 2011, and eight in 2014. This increase resulted from territory fragmentation because of berries and avocado cultivars expansion over wooded area.

Employing TDMA Protocol in Neural Nanonetworks in Case of Neuron Specific Faults.

PubMed

Tezcan, Hakan; Oktug, Sema F; Kök, Fatma Neşe

2015-09-01

Many neurodegenerative diseases arise from the malfunctioning neurons in the pathway where the signal is carried. In this paper, we propose neuron specific TDMA/multiplexing and demultiplexing mechanisms to convey the spikes of a receptor neuron over a neighboring path in case of an irreversible path fault existing in its original path. The multiplexing mechanism depends on neural delay box (NDB) which is composed of a relay unit and a buffering unit. The relay unit can be realized as a nanoelectronic device. The buffering unit can be implemented either via neural delay lines as employed in optical switching systems or via nanoelectronic delay lines, i.e., delay flip flops. Demultiplexing is realized by a demultiplexer unit according to the time slot assignment information. Besides, we propose the use of neural interfaces in the NDBs and the demultiplexer unit for detecting and stimulating the generation of spikes. The objective of the proposed mechanisms is to substitute a malfunctioning path, increase the number of spikes delivered and correctly deliver the spikes to the intended part of the somatosensory cortex. The results demonstrate that significant performance improvement on the successively delivered number of spikes is achievable when delay lines are employed as neural buffers in NDBs.

Africa South of the Sahara. Grade Twelve. [Resource Unit IV.] Project Social Studies.

ERIC Educational Resources Information Center

Minnesota Univ., Minneapolis. Project Social Studies Curriculum Center.

This is the fourth of seven resource units for a twelfth grade course on value conflicts and policy decisions. The topic for this unit is Africa south of the Sahara. The objectives are listed as to generalizations, skills, and values. The double-page format relates objectives to pertinent content, teaching procedures, and instructional materials.…

Elementary School Project for Level Two: Resource Unit. Lincoln County Exemplary Program in Vocational Education.

ERIC Educational Resources Information Center

Lincoln County Schools, Hamlin, WV.

The occupational resource unit, one of a series encompassing grade levels one through ten, was prepared by the Lincoln County (West Virginia) Exemplary Project staff for classroom use at the second grade level or for use as a teaching model. The guide contains a synopsis of the entire unit, general objectives, behavioral objectives, teaching…

Quality Assurance in Dietetic Services Workshop for the Dietetic Assistant.

ERIC Educational Resources Information Center

Oklahoma State Dept. of Vocational and Technical Education, Stillwater. Curriculum and Instructional Materials Center.

This workshop guide is a unit of study for teaching dietetic assistants to work with quality control in a nursing home or hospital. The objective of the unit is to enable the students to develop and expand a dietetic services administrative and clinical quality assurance program in his or her own institution. Following the unit objective, the unit…

Water Quality Monitoring: An Environmental Studies Unit for Biology 20/30. Teacher's Guide.

ERIC Educational Resources Information Center

Alberta Environment, Edmonton. Environmental Education Resources Branch.

The objective of this environmental studies unit is to establish a water quality monitoring project for high school students in Alberta while simultaneously providing a unit which meets the objectives of the Biology 20 program (and which may also be used in Biology 10 and 30). Through this project, students assist in the collection,…

Water Quality Monitoring: An Environmental Studies Unit for Biology 20/30. Student Manual.

ERIC Educational Resources Information Center

Alberta Environment, Edmonton. Environmental Education Resources Branch.

The objective of this environmental studies unit is to establish a water quality monitoring project for high school students in Alberta while simultaneously providing a unit which meets the objectives of the Biology 20 program (and which may also be used in Biology 10 and 30). Through this project, students assist in the collection,…

2005 Annual Operations Report for INTEC Operable Unit 3-13, Group 1, Tank Farm Interim Action

DOE Office of Scientific and Technical Information (OSTI.GOV)

D. Shanklin

2006-07-19

This annual operations report describes the requirements followed and activities conducted to inspect, monitor, and maintain the items installed during performance of the Waste Area Group 3, Operable Unit 3-13, Group 1, Tank Farm Interim Action, at the Idaho Nuclear Technology and Engineering Center. This report describes inspection and monitoring activities fro the surface-sealed areas within the tank farm, concrete-lined ditches and culverts in and around the tank farm, the lift station, and the lined evaporation pond. These activities are intended to assure that the interim action is functioning adequately to meet the objectives stated in the Operable Unit 3-13,more » Record of Decision for the Group 1, Tank Farm Interim Action, (DOE/ID-10660) and as amended by the agreement to resolve dispute, which was effective in February 2003.« less

2006 Annual Operations Report for INTEC Operable Unit 3-13, Group 1, Tank Farm Interim Action

DOE Office of Scientific and Technical Information (OSTI.GOV)

D. E. Shanklin

2007-02-14

This annual operations report describes the requirements followed and activities conducted to inspect, monitor, and maintain the items installed during performance of the Waste Area Group 3, Operable Unit 3-13, Group 1, Tank Farm Interim Action, at the Idaho Nuclear Technology and Engineering Center. This report covers the time period from January 1 through December 31, 2006, and describes inspection and monitoring activities for the surface-sealed areas within the tank farm, concrete-lined ditches and culverts in and around the tank farm, the lift station, and the lined evaporation pond. These activities are intended to assure that the interim action ismore » functioning adequately to meet the objectives stated in the Operable Unit 3-13, Record of Decision for the Group 1, Tank Farm Interim Action (DOE/ID-10660) as described in the Group 1 Remedial Design/Remedial Action Work Plan (DOE/ID-10772).« less

The Athena X-ray Integral Field Unit

NASA Astrophysics Data System (ADS)

Barret, D.

2017-10-01

The Athena X-ray Integral Field Unit (X-IFU) is a high-resolution X-ray spectrometer, providing 2.5 eV spectral resolution, over a 5' (equivalent diameter) field of view, and count rate capabilities up to 1 Crab in the 0.2-12 keV range. Approaching the end of its feasibility study (scheduled around the end of 2017), I will briefly recall the scientific objectives of Athena driving the X-IFU specifications and will describe its current baseline configuration and the expected performances. I will outline the on-going technology developments that will enable the X-IFU. The X-IFU will be developed by an international consortium led by France (IRAP/CNES), the Netherlands (SRON), Italy (IAPS), with ESA member state contributions from Belgium, Finland, Germany, Poland, Spain and Switzerland, and international partner contributions from Japan and the United States. This talk is given on behalf of the X-IFU Consortium.

[Monitoring evaluation system for high-specialty hospitals].

PubMed

Fajardo Dolci, Germán; Aguirre Gas, Héctor G; Robledo Galván, Héctor

2011-01-01

Hospital evaluation is a fundamental process to identify medical units' objective compliance, to analyze efficiency of resource use and allocation, institutional values and mission alignment, patient safety and quality standards, contributions to research and medical education, and the degree of coordination among medical units and the health system as a whole. We propose an evaluation system for highly specialized regional hospitals through the monitoring of performance indicators. The following are established as base thematic elements in the construction of indicators: safe facilities and equipment, financial situation, human resources management, policy management, organizational climate, clinical activity, quality and patient safety, continuity of care, patients' and providers' rights and obligations, teaching, research, social responsibility, coordination mechanisms. Monitoring refers to the planned and systematic evaluation of valid and reliable indicators, aimed at identifying problems and opportunity areas. Moreover, evaluation is a powerful tool to strengthen decision-making and accountability in medical units.

Scale-up of mild gasification to be a process development unit mildgas 24 ton/day PDU design report. Final report, November 1991--July 1996

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

From November 1991 to April 1996, Kerr McGee Coal Corporation (K-M Coal) led a project to develop the Institute of Gas Technology (IGT) Mild Gasification (MILDGAS) process for near-term commercialization. The specific objectives of the program were to: design, construct, and operate a 24-tons/day adiabatic process development unit (PDU) to obtain process performance data suitable for further design scale-up; obtain large batches of coal-derived co-products for industrial evaluation; prepare a detailed design of a demonstration unit; and develop technical and economic plans for commercialization of the MILDGAS process. The project team for the PDU development program consisted of: K-M Coal,more » IGT, Bechtel Corporation, Southern Illinois University at Carbondale (SIUC), General Motors (GM), Pellet Technology Corporation (PTC), LTV Steel, Armco Steel, Reilly Industries, and Auto Research.« less

Quantifying the relative contribution of an ecological reserve to conservation objectives

USGS Publications Warehouse

Aagaard, Kevin; Lyons, James E.; Thogmartin, Wayne E.

2017-01-01

Evaluating the role public lands play in meeting conservation goals is an essential step in good governance. We present a tool for comparing the regional contribution of each of a suite of wildlife management units to conservation goals. We use weighted summation (simple additive weighting) to compute a Unit Contribution Index (UCI) based on species richness, population abundance, and a conservation score based on IUCN Red List classified threat levels. We evaluate UCI for a subset of the 729 participating wetlands of the Integrated Waterbird Management and Monitoring (IWMM) Program across U.S. Fish and Wildlife Service Regions 3 (Midwest USA), 4 (Southeast USA), and 5 (Northeast USA). We found that the median across-Region UCI for Region 5 was greater than Regions 3 and 4, while Region 4 had the greatest within-Region UCI median. This index is a powerful tool for wildlife managers to evaluate the performance of units within the conservation estate.

[Clinical Management: Basics and organization].

PubMed

Torres, Juan; Mingo, Carlos

2015-01-01

Many strategies have been proposed over the last years to ensure the Health Care System sustainability, mainly after the recent global economic crisis. One of the most attractive approaches is clinical management, which is a way of organizing health care units based on active participation of professionals who receive the transference of responsibilities dispoto achieve the objectives with the mission of ensuring a proper patient centered care, taking into consideration the rational use of resources (Efficiency) For the start up of Health Care structures based on clinical management, it is necessary a previous management culture within the departments involved and the center's executive board. Furthermore, to achieve the objectives proposed various tools must be used, such as evidence based medicine, clinical practice variability analysis, process management, in addition of quality and safety strategies. The units involved have to propose a management plan that will result in a management contract with the center's executive board. This agreement will establish some activity, expense and quality objectives that will be quantifiable through various indicators. Risk transference to the unit must include certain budget allocation and incentive decision capacity. Clinical management must not be employed as a savings tool from the part of macro and meso management. There is not a health care structure based on clinical management that have a general character for all health care organizations, existing a great variability in the adoption of various organizational formulas, so that every center must perform its own analysis and decide the most adequate model. In our country there are many clinical management experiences, although there is a long way to go.

Planning for people? An evaluation of objectives for managing visitors at wildlife refuges in the United States

Treesearch

Jeffrey J. Brooks; Robert Massengale

2011-01-01

This study evaluates the quality of planning objectives for visitor services as written in Comprehensive Conservation Plans for the National Wildlife Refuge System of the United States. Planners in the U.S. Fish and Wildlife Service are predominantly writing public use objectives that address wildlife recreation and education. Results indicate that planners are writing...

System for conversion between the boundary representation model and a constructive solid geometry model of an object

DOEpatents

Christensen, N.C.; Emery, J.D.; Smith, M.L.

1985-04-29

A system converts from the boundary representation of an object to the constructive solid geometry representation thereof. The system converts the boundary representation of the object into elemental atomic geometrical units or I-bodies which are in the shape of stock primitives or regularized intersections of stock primitives. These elemental atomic geometrical units are then represented in symbolic form. The symbolic representations of the elemental atomic geometrical units are then assembled heuristically to form a constructive solid geometry representation of the object usable for manufacturing thereof. Artificial intelligence is used to determine the best constructive solid geometry representation from the boundary representation of the object. Heuristic criteria are adapted to the manufacturing environment for which the device is to be utilized. The surface finish, tolerance, and other information associated with each surface of the boundary representation of the object are mapped onto the constructive solid geometry representation of the object to produce an enhanced solid geometry representation, particularly useful for computer-aided manufacture of the object. 19 figs.

The blood antioxidant defence capacity during intermittent hypoxic training in elite swimmers

PubMed Central

Poprzęcki, S; Zając, A; Karpiński, J; Wilk, R; Bril, G; Maszczyk, A; Toborek, M

2016-01-01

The main objective of this study was to examine the chronic effect of simulated intermittent normobaric hypoxia on blood antioxidant defence capacity in swimmers. The study included 14 male and 14 female competitive swimmers performing part of land training under simulated intermittent normobaric hypoxia (O2 = 15.5%) or in normoxia. Land interval training took place twice per week, with a total of 8 training units during the study, performed with individualized intensity. The activities of blood antioxidant enzymes did not change significantly during the first and last training unit in the hypoxic and normoxic group. However, when comparing individual variables a significant effect of exercise was observed on GPx an CAT activities, whereas training units significantly differentiated GPx and GR activities. The oxygen conditions and gender had a significant influence on CAT activity. The total antioxidant capacity was not significantly affected. Only in male swimmers from the hypoxic group did the training significantly increase resting levels of MDA. In conclusion, training in normobaric hypoxia was not an adequate stimulus for the excessive response of the antioxidant defence system, despite increased oxidative stress in these conditions. PMID:28090139

Iraq’s Shia Warlords and Their Militias: Political and Security Challenges and Options

DTIC Science & Technology

2015-06-01

Middle East his- tory and Arabic. He has studied and traveled widely in the Middle East. ix SUMMARY As America’s de facto co-belligerents who often...5f. WORK UNIT NUMBER 7. PERFORMING ORGANIZATION NAME(S) AND ADDRESS(ES) U.S. Army War College,Strategic Studies Institute,47 Ashburn Drive,Carlisle...routinely engage in discourse and debate concerning the role of ground forces in achieving national security objectives. The Strategic Studies Institute

Process Interaction for Wastewater Facilities, Wastewater Technology: A Two-Year Post High School Instructional Program. An Instructor's Guide for Use of Instructional Material in Wastewater Technology Training Programs. Volume V.

ERIC Educational Resources Information Center

Gearheart, Robert A.; And Others

This document is one in a series which outlines performance objectives and instructional modules for a course of study which explains the relationships and functions of the process units in a wastewater treatment plant. The modules are arranged in an order appropriate for teaching students with no experience. The modules can also be rearranged and…

Integrated Advanced Microwave Sounding Unit-A (AMSU-A). Engineering Test Report: METSAT A1 Signal Processor (P/N: 1331670-2, S/N: F04)

NASA Technical Reports Server (NTRS)

Lund, D.

1998-01-01

This report presents a description of the tests performed, and the test data, for the A1 METSAT Signal Processor Assembly PN: 1331679-2, S/N F04. The assembly was tested in accordance with AE-26754, "METSAT Signal Processor Scan Drive Test and Integration Procedure." The objective is to demonstrate functionality of the signal processor prior to instrument integration.

Film holder for radiographing tubing

DOEpatents

Davis, Earl V.; Foster, Billy E.

1976-01-01

A film cassette is provided which may be easily placed about tubing or piping and readily held in place while radiographic inspection is performed. A pair of precurved light-impervious semi-rigid plastic sheets, hinged at one edge, enclose sheet film together with any metallic foils or screens. Other edges are made light-tight with removable caps, and the entire unit is held securely about the object to be radiographed with a releasable fastener such as a strip of Velcro.

Research pressure instrumentation for NASA Space Shuttle main engine

NASA Technical Reports Server (NTRS)

Anderson, P. J.; Nussbaum, P.; Gustafson, G.

1984-01-01

The development of prototype pressure transducers which are targeted to meet the Space Shuttle Main Engine SSME performance design goals is discussed. The fabrication, testing and delivery of 10 prototype units is examined. Silicon piezoresistive strain sensing technology is used to achieve the objectives of advanced state-of-the-art pressure sensors in terms of reliability, accuracy and ease of manufacture. Integration of multiple functions on a single chip is the key attribute of this technology.

Integration, commissioning, and performance of the UK FMOS spectrograph

NASA Astrophysics Data System (ADS)

Dalton, Gavin B.; Lewis, Ian J.; Tosh, Ian A. J.; Blackburn, Colin; Bonfield, David G.; Brooks, Charles B.; Holmes, Alan R.; Lee, Hanshin; Froud, Tim R.; Akiyama, Masayuki; Tamura, Naoyuki; Takato, Naruhisa

2008-07-01

The UK FMOS spectrograph forms part of Subaru's FMOS multi-object infrared spectroscopy facility. The spectrograph was shipped to Hilo in component form in August of 2007. We describe the integration sequence for the spectrograph, the results of cooldown tests using a new chiller unit fitted to the spectrograph at the telescope, and alignment tests of the spectrograph, gratings and OH-suppression masks. We present the first-light observations for the spectrograph from May 2008.

Ada Quality and Style: Guidelines for Professional Programmers

DTIC Science & Technology

1989-01-01

Paes. Enter the total Block 7. Performing Organization Name(s) and number of pages.AccLpr., A). Self-explanatory. Block 16. Price.o de Enter...parts of typical header comment blocks. Including other, de facto extraneous or superfluous information is a waste of time. Most of the information...specification and to export only what is necessary for another unit to use the package properly. Visibility of objects such as DEFAULT.3IDT.t in package TEXTo

Developing an Assessment Framework for U.S. Air Force Building Partnerships Programs

DTIC Science & Technology

2010-01-01

www.rand.org as a public service of the RAND Corporation . 6Jump down to document THE ARTS CHILD POLICY CIVIL JUSTICE EDUCATION ENERGY AND ENVIRONMENT HEALTH...HOMELAND SECURITY TRANSPORTATION AND INFRASTRUCTURE WORKFORCE AND WORKPLACE The RAND Corporation is a nonprofit research organization providing objective...NUMBER 6. AUTHOR(S) 5d. PROJECT NUMBER 5e. TASK NUMBER 5f. WORK UNIT NUMBER 7. PERFORMING ORGANIZATION NAME(S) AND ADDRESS(ES) Rand Corporation

A smooth particle hydrodynamics code to model collisions between solid, self-gravitating objects

NASA Astrophysics Data System (ADS)

Schäfer, C.; Riecker, S.; Maindl, T. I.; Speith, R.; Scherrer, S.; Kley, W.

2016-05-01

Context. Modern graphics processing units (GPUs) lead to a major increase in the performance of the computation of astrophysical simulations. Owing to the different nature of GPU architecture compared to traditional central processing units (CPUs) such as x86 architecture, existing numerical codes cannot be easily migrated to run on GPU. Here, we present a new implementation of the numerical method smooth particle hydrodynamics (SPH) using CUDA and the first astrophysical application of the new code: the collision between Ceres-sized objects. Aims: The new code allows for a tremendous increase in speed of astrophysical simulations with SPH and self-gravity at low costs for new hardware. Methods: We have implemented the SPH equations to model gas, liquids and elastic, and plastic solid bodies and added a fragmentation model for brittle materials. Self-gravity may be optionally included in the simulations and is treated by the use of a Barnes-Hut tree. Results: We find an impressive performance gain using NVIDIA consumer devices compared to our existing OpenMP code. The new code is freely available to the community upon request. If you are interested in our CUDA SPH code miluphCUDA, please write an email to Christoph Schäfer. miluphCUDA is the CUDA port of miluph. miluph is pronounced [maßl2v]. We do not support the use of the code for military purposes.

Distraction produces over-additive increases in the degree to which alcohol impairs driving performance

PubMed Central

Van Dyke, Nicholas A.; Fillmore, Mark T.

2015-01-01

Rationale Research indicates that alcohol intoxication and increased demands on drivers’ attention from distractions (e.g. passengers and cell phones) contribute to poor driving performance and increased rates of traffic accidents and fatalities. Objectives The present study examined the separate and combined effects of alcohol and distraction on simulated driving performance at blood alcohol concentrations (BrACs) below the legal driving limit in the United States (i.e. 0.08%). Methods Fifty healthy adult drivers (36 men and 14 women) were tested in a driving simulator following a 0.65 g/kg dose of alcohol and a placebo. Drivers completed two drive tests; a distracted drive, which included a two-choice detection task, and an undistracted control drive. Multiple indicators of driving performance, such as drive speed, within-lane deviation, steering rate, and lane exceedances were measured. Results Alcohol and distraction each impaired measures of driving performance. Moreover, the magnitude of alcohol impairment was increased by at least two-fold when tested under the distracting versus the undistracted condition. Conclusions The findings highlight the need for a clearer understanding of how common distractions impact intoxicated drivers, especially at BrACs that are currently legal for driving in the United States. PMID:26349918

The JWST/NIRSpec instrument: update on status and performances

NASA Astrophysics Data System (ADS)

Birkmann, Stephan M.; Ferruit, Pierre; Rawle, Tim; Sirianni, Marco; Alves de Oliveira, Catarina; Böker, Torsten; Giardino, Giovanna; Lützgendorf, Nora; Marston, Anthony; Stuhlinger, Martin; te Plate, Maurice B. J.; Jensen, Peter; Rumler, Peter; Dorner, Bernhard; Karl, Hermann; Mosner, Peter; Wright, Raymond H.; Rapp, Robert

2016-07-01

The Near-Infrared Spectrograph (NIRSpec) is one of the four instruments on the James Webb Space Telescope (JWST) which is scheduled for launch in 2018. NIRSpec is developed by the European Space Agency (ESA) with Airbus Defense and Space Germany as prime contractor. The instrument offers seven dispersers covering the wavelength range from 0.6 to 5.3 micron with resolutions from R ˜ 100 to R ˜ 2700. NIRSpec will be capable of obtaining spectra for more than 100 objects simultaneously using an array of micro-shutters. It also features an integral field unit with 3" x 3" field of view and a range of slits for high contrast spectroscopy of individual objects and time series observations of e.g. transiting exoplanets. NIRSpec is in its final flight configuration and underwent cryogenic performance testing at the Goddard Space Flight Center in Winter 2015/16 as part of the Integrated Science Instrument Module (ISIM). We present the current status of the instrument and also provide an update on NIRSpec performances based on results from the ISIM level test campaign.

Object Persistence Enhances Spatial Navigation: A Case Study in Smartphone Vision Science.

PubMed

Liverence, Brandon M; Scholl, Brian J

2015-07-01

Violations of spatiotemporal continuity disrupt performance in many tasks involving attention and working memory, but experiments on this topic have been limited to the study of moment-by-moment on-line perception, typically assessed by passive monitoring tasks. We tested whether persisting object representations also serve as underlying units of longer-term memory and active spatial navigation, using a novel paradigm inspired by the visual interfaces common to many smartphones. Participants used key presses to navigate through simple visual environments consisting of grids of icons (depicting real-world objects), only one of which was visible at a time through a static virtual window. Participants found target icons faster when navigation involved persistence cues (via sliding animations) than when persistence was disrupted (e.g., via temporally matched fading animations), with all transitions inspired by smartphone interfaces. Moreover, this difference occurred even after explicit memorization of the relevant information, which demonstrates that object persistence enhances spatial navigation in an automatic and irresistible fashion. © The Author(s) 2015.

EVA Development and Verification Testing at NASA's Neutral Buoyancy Laboratory

NASA Technical Reports Server (NTRS)

Jairala, Juniper C.; Durkin, Robert; Marak, Ralph J.; Sipila, Stepahnie A.; Ney, Zane A.; Parazynski, Scott E.; Thomason, Arthur H.

2012-01-01

As an early step in the preparation for future Extravehicular Activities (EVAs), astronauts perform neutral buoyancy testing to develop and verify EVA hardware and operations. Neutral buoyancy demonstrations at NASA Johnson Space Center's Sonny Carter Training Facility to date have primarily evaluated assembly and maintenance tasks associated with several elements of the International Space Station (ISS). With the retirement of the Shuttle, completion of ISS assembly, and introduction of commercial players for human transportation to space, evaluations at the Neutral Buoyancy Laboratory (NBL) will take on a new focus. Test objectives are selected for their criticality, lack of previous testing, or design changes that justify retesting. Assembly tasks investigated are performed using procedures developed by the flight hardware providers and the Mission Operations Directorate (MOD). Orbital Replacement Unit (ORU) maintenance tasks are performed using a more systematic set of procedures, EVA Concept of Operations for the International Space Station (JSC-33408), also developed by the MOD. This paper describes the requirements and process for performing a neutral buoyancy test, including typical hardware and support equipment requirements, personnel and administrative resource requirements, examples of ISS systems and operations that are evaluated, and typical operational objectives that are evaluated.

Validation of Storm Water Management Model Storm Control Measures Modules

NASA Astrophysics Data System (ADS)

Simon, M. A.; Platz, M. C.

2017-12-01

EPA's Storm Water Management Model (SWMM) is a computational code heavily relied upon by industry for the simulation of wastewater and stormwater infrastructure performance. Many municipalities are relying on SWMM results to design multi-billion-dollar, multi-decade infrastructure upgrades. Since the 1970's, EPA and others have developed five major releases, the most recent ones containing storm control measures modules for green infrastructure. The main objective of this study was to quantify the accuracy with which SWMM v5.1.10 simulates the hydrologic activity of previously monitored low impact developments. Model performance was evaluated with a mathematical comparison of outflow hydrographs and total outflow volumes, using empirical data and a multi-event, multi-objective calibration method. The calibration methodology utilized PEST++ Version 3, a parameter estimation tool, which aided in the selection of unmeasured hydrologic parameters. From the validation study and sensitivity analysis, several model improvements were identified to advance SWMM LID Module performance for permeable pavements, infiltration units and green roofs, and these were performed and reported herein. Overall, it was determined that SWMM can successfully simulate low impact development controls given accurate model confirmation, parameter measurement, and model calibration.

Orion Launch Abort System Jettison Motor Performance During Exploration Flight Test 1

NASA Technical Reports Server (NTRS)

McCauley, Rachel J.; Davidson, John B.; Winski, Richard G.

2015-01-01

This paper presents an overview of the flight test objectives and performance of the Orion Launch Abort System during Exploration Flight Test-1. Exploration Flight Test-1, the first flight test of the Orion spacecraft, was managed and led by the Orion prime contractor, Lockheed Martin, and launched atop a United Launch Alliance Delta IV Heavy rocket. This flight test was a two-orbit, high-apogee, high-energy entry, low-inclination test mission used to validate and test systems critical to crew safety. This test included the first flight test of the Launch Abort System performing Orion nominal flight mission critical objectives. Although the Orion Program has tested a number of the critical systems of the Orion spacecraft on the ground, the launch environment cannot be replicated completely on Earth. Data from this flight will be used to verify the function of the jettison motor to separate the Launch Abort System from the crew module so it can continue on with the mission. Selected Launch Abort System flight test data is presented and discussed in the paper. Through flight test data, Launch Abort System performance trends have been derived that will prove valuable to future flights as well as the manned space program.

Seeing the Implications of Zero Again

ERIC Educational Resources Information Center

Ponce, Gregorio A.

2015-01-01

Composing and decomposing numbers with base-ten blocks depends on children being able to see ten both as ten units and as one group of ten units (a long), cognizant that its value is the same in either case. Being able to see, or deciding when to see, an object or collection of objects as a unit is a key skill that children must develop to solve…

Development of deployable fibre integral-field-units for the E-ELT

NASA Astrophysics Data System (ADS)

Kelz, Andreas; Jahn, Thomas; Neumann, Justus; Roth, Martin M.; Rutowska, Monika; Sandin, Christer; Nicklas, Harald; Anwand, Heiko; Schmidt, C.

2014-07-01

The use of deployable fibre-bundles plays an increasing role in the design of future Multi-Object-Spectrographs (MOS). Within a research and development project for "Enabling Technologies for the E-ELT", various miniaturized, fibrebundles were designed, built and tested for their suitability for a proposed ELT-MOS instrument. The paper describes the opto-mechanical designs of the bundles and the different manufacture approaches, using glued, stacked and fused optical fibre bundles. The fibre bundles are characterized for performance, using dedicated testbenches in the laboratory and at a telescope simulator. Their performance is measured with respect to geometric accuracy, throughput, FRD behavior and cross-talk between channels.

Automated batch characterization of inkjet-printed elastomer lenses using a LEGO platform.

PubMed

Sung, Yu-Lung; Garan, Jacob; Nguyen, Hoang; Hu, Zhenyu; Shih, Wei-Chuan

2017-09-10

Small, self-adhesive, inkjet-printed elastomer lenses have enabled smartphone cameras to image and resolve microscopic objects. However, the performance of different lenses within a batch is affected by hard-to-control environmental variables. We present a cost-effective platform to perform automated batch characterization of 300 lens units simultaneously for quality inspection. The system was designed and configured with LEGO bricks, 3D printed parts, and a digital camera. The scheme presented here may become the basis of a high-throughput, in-line inspection tool for quality control purposes and can also be employed for optimization of the manufacturing process.

Welding.

ERIC Educational Resources Information Center

Cowan, Earl; And Others

The curriculum guide for welding instruction contains 16 units presented in six sections. Each unit is divided into the following areas, each of which is color coded: terminal objectives, specific objectives, suggested activities, and instructional materials; information sheet; transparency masters; assignment sheet; test; and test answers. The…

Unreviewed Disposal Question Evaluation: Impact of New Information since 2008 PA on Current Low-Level Solid Waste Operations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Flach, G.; Smith, F.; Hamm, L.

2014-10-06

Solid low-level waste disposal operations are controlled in part by an E-Area Low-Level Waste Facility (ELLWF) Performance Assessment (PA) that was completed by the Savannah River National Laboratory (SRNL) in 2008 (WSRC 2008). Since this baseline analysis, new information pertinent to disposal operations has been identified as a natural outcome of ongoing PA maintenance activities and continuous improvement in model simulation techniques (Flach 2013). An Unreviewed Disposal Question (UDQ) Screening (Attachment 1) has been initiated regarding the continued ability of the ELLWF to meet Department of Energy (DOE) Order 435.1 performance objectives in light of new PA items and datamore » identified since completion of the original UDQ Evaluation (UDQE). The present UDQE assesses the ability of Solid Waste (SW) to meet performance objectives by estimating the influence of new information items on a recent sum-of-fractions (SOF) snapshot for each currently active E-Area low-level waste disposal unit. A final SOF, as impacted by this new information, is projected based on the assumptions that the current disposal limits, Waste Information Tracking System (WITS) administrative controls, and waste stream composition remain unchanged through disposal unit operational closure (Year 2025). Revision 1 of this UDQE addresses the following new PA items and data identified since completion of the original UDQE report in 2013: New K d values for iodine, radium and uranium; Elimination of cellulose degradation product (CDP) factors; Updated radionuclide data; Changes in transport behavior of mobile radionuclides; Potential delay in interim closure beyond 2025; and Component-in-grout (CIG) plume interaction correction. Consideration of new information relative to the 2008 PA baseline generally indicates greater confidence that PA performance objectives will be met than indicated by current SOF metrics. For SLIT9, the previous prohibition of non-crushable containers in revision 0 of this UDQE has rendered the projected final SOF for SLIT9 less than the WITS Admin Limit. With respect to future disposal unit operations in the East Slit Trench Group, consideration of new information for Slit Trench#14 (SLIT14) reduced the current SOF for the limiting All-Pathways 200-1000 year period (AP2) by an order of magnitude and by one quarter for the Beta-Gamma 12-100 year period (BG2) pathway. On the balance, updates to K{sub d} values and dose factors and elimination of CDP factors (generally favorable) more than compensated for the detrimental impact of a more rigorous treatment of plume dispersion. These observations suggest that future operations in the East Slit Trench Group can be conducted with higher confidence using current inventory limits, and that limits could be increased if desired for future low-level waste disposal units. The same general conclusion applies to future ST’s in the West Slit Trench Group based on the Impacted Final SOFs for existing ST’s in that area.« less

Design of a water electrolysis flight experiment

NASA Technical Reports Server (NTRS)

Lee, M. Gene; Grigger, David J.; Thompson, C. Dean; Cusick, Robert J.

1993-01-01

Supply of oxygen (O2) and hydrogen (H2) by electolyzing water in space will play an important role in meeting the National Aeronautics and Space Administration's (NASA's) needs and goals for future space missios. Both O2 and H2 are envisioned to be used in a variety of processes including crew life support, spacecraft propulsion, extravehicular activity, electrical power generation/storage as well as in scientific experiment and manufacturing processes. The Electrolysis Performance Improvement Concept Study (EPICS) flight experiment described herein is sponsored by NASA Headquarters as a part of the In-Space Technology Experiment Program (IN-STEP). The objective of the EPICS is to further contribute to the improvement of the SEF technology, specifially by demonstrating and validating the SFE electromechanical process in microgravity as well as investigating perrformance improvements projected possible in a microgravity environment. This paper defines the experiment objective and presents the results of the preliminary design of the EPICS. The experiment will include testing three subscale self-contained SFE units: one containing baseline components, and two units having variations in key component materials. Tests will be conducted at varying current and thermal condition.

Toward a self-organizing pre-symbolic neural model representing sensorimotor primitives.

PubMed

Zhong, Junpei; Cangelosi, Angelo; Wermter, Stefan

2014-01-01

The acquisition of symbolic and linguistic representations of sensorimotor behavior is a cognitive process performed by an agent when it is executing and/or observing own and others' actions. According to Piaget's theory of cognitive development, these representations develop during the sensorimotor stage and the pre-operational stage. We propose a model that relates the conceptualization of the higher-level information from visual stimuli to the development of ventral/dorsal visual streams. This model employs neural network architecture incorporating a predictive sensory module based on an RNNPB (Recurrent Neural Network with Parametric Biases) and a horizontal product model. We exemplify this model through a robot passively observing an object to learn its features and movements. During the learning process of observing sensorimotor primitives, i.e., observing a set of trajectories of arm movements and its oriented object features, the pre-symbolic representation is self-organized in the parametric units. These representational units act as bifurcation parameters, guiding the robot to recognize and predict various learned sensorimotor primitives. The pre-symbolic representation also accounts for the learning of sensorimotor primitives in a latent learning context.

Toward a self-organizing pre-symbolic neural model representing sensorimotor primitives

PubMed Central

Zhong, Junpei; Cangelosi, Angelo; Wermter, Stefan

2014-01-01

The acquisition of symbolic and linguistic representations of sensorimotor behavior is a cognitive process performed by an agent when it is executing and/or observing own and others' actions. According to Piaget's theory of cognitive development, these representations develop during the sensorimotor stage and the pre-operational stage. We propose a model that relates the conceptualization of the higher-level information from visual stimuli to the development of ventral/dorsal visual streams. This model employs neural network architecture incorporating a predictive sensory module based on an RNNPB (Recurrent Neural Network with Parametric Biases) and a horizontal product model. We exemplify this model through a robot passively observing an object to learn its features and movements. During the learning process of observing sensorimotor primitives, i.e., observing a set of trajectories of arm movements and its oriented object features, the pre-symbolic representation is self-organized in the parametric units. These representational units act as bifurcation parameters, guiding the robot to recognize and predict various learned sensorimotor primitives. The pre-symbolic representation also accounts for the learning of sensorimotor primitives in a latent learning context. PMID:24550798

Development of a slicer integral field unit for the existing optical spectrograph FOCAS: progress

NASA Astrophysics Data System (ADS)

Ozaki, Shinobu; Tanaka, Yoko; Hattori, Takashi; Mitsui, Kenji; Fukushima, Mitsuhiro; Okada, Norio; Obuchi, Yoshiyuki; Tsuzuki, Toshihiro; Miyazaki, Satoshi; Yamashita, Takuya

2014-07-01

We are developing an integral field unit (IFU) with an image slicer for the existing optical spectrograph, Faint Object Camera And Spectrograph (FOCAS), on the Subaru Telescope. The slice width is 0.43 arcsec, the slice number is 23, and the field of view is 13.5 × 9.89 arcsec2. Sky spectrum separated by about 5.7 arcmin from an object field can be simultaneously obtained, which allows us precise background subtraction. Slice mirrors, pupil mirrors and slit mirrors are all glass, and their mirror surfaces are fabricated by polishing. Our IFU is about 200 mm × 300 mm × 80 mm in size and 1 kg in weight. It is installed into a mask storage in FOCAS along with one or two mask plates, and inserted into the optical path by using the existing mask exchange mechanism. This concept allow us flexible operation such as Targets of Opportunity observations. High reflectivity of multilayer dielectric coatings offers high throughput (>80%) of the IFU. In this paper, we will report a final optical layout, its performances, and results of prototyping works.

Design and fabrication of the Mini-Brayton Recuperator (MBR)

NASA Technical Reports Server (NTRS)

Killackey, J. J.; Graves, R.; Mosinskis, G.

1978-01-01

Development of a recuperator for a 2.0 kW closed Brayton space power system is described. The plate-fin heat exchanger is fabricated entirely from Hastelloy X and is designed for 10 years continuous operation at 1000 K (1300 F) with a Xenon-helium working fluid. Special design provisions assure uniform flow distribution, crucial for meeting 0.975 temperature effectiveness. Low-cycle fatigue, resulting from repeated startup and shutdown cycles, was identified as the most critical structural design problem. It is predicted that the unit has a minimum fatigue life of 220 cycles. This is in excess of the BIPS requirement of 100 cycles. Heat transfer performance and thermal cycle testing with air, using a prototype unit, verified that all design objectives can be met.

Studying the incommensurability that unites us: persuasion across discourse communities, persuasion via boundary objects

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wilson, G. D.

2003-01-01

In the science studies literature the theoretical construct of boundary objects has been developed to explain how diverse communities clustered around a scientific subject area cooperate to advance that area. Boundary objects are 'scientific objects that inhabit several intersecting social worlds . . . and satisfy the informational requirements of each of them' (Star and Griesemer 393). Star and Griesemer's foundational article showed that these objects can be shared by communities ranging from academic researchers to amateur enthiasts, adminsitrators, philanthropists, and technicians. While each community understands the object differently, there is enough commonality in the understanding of the object tomore » unite these distinct social worlds and facilitate cooperation among them.« less

Implementing medical revalidation in the United Kingdom: Findings about organisational changes and impacts from a survey of Responsible Officers

PubMed Central

Boyd, Alan; Bryce, Marie; Luscombe, Kayleigh; Tazzyman, Abigail; Tredinnick-Rowe, John; Archer, Julian

2017-01-01

Objective To describe the implementation of medical revalidation in healthcare organisations in the United Kingdom and to examine reported changes and impacts on the quality of care. Design A cross-sectional online survey gathering both quantitative and qualitative data about structures and processes for medical revalidation and wider quality management in the organisations which employ or contract with doctors (termed ‘designated bodies’) from the senior doctor in each organisation with statutory responsibility for medical revalidation (termed the ‘Responsible Officer’). Setting United Kingdom Participants Responsible Officers in designated bodies in the United Kingdom. Five hundred and ninety-five survey invitations were sent and 374 completed surveys were returned (63%). Main outcome measures The role of Responsible Officers, the development of organisational mechanisms for quality assurance or improvement, decision-making on revalidation recommendations, impact of revalidation and mechanisms for quality assurance or improvement on clinical practice and suggested improvements to revalidation arrangements. Results Responsible Officers report that revalidation has had some impacts on the way medical performance is assured and improved, particularly strengthening appraisal and oversight of quality within organisations and having some impact on clinical practice. They suggest changes to make revalidation less ‘one size fits all’ and more responsive to individual, organisational and professional contexts. Conclusions Revalidation appears primarily to have improved systems for quality improvement and the management of poor performance to date. There is more to be done to ensure it produces wider benefits, particularly in relation to doctors who already perform well. PMID:28084166

Implementing medical revalidation in the United Kingdom: Findings about organisational changes and impacts from a survey of Responsible Officers.

PubMed

Walshe, Kieran; Boyd, Alan; Bryce, Marie; Luscombe, Kayleigh; Tazzyman, Abigail; Tredinnick-Rowe, John; Archer, Julian

2017-01-01

Objective To describe the implementation of medical revalidation in healthcare organisations in the United Kingdom and to examine reported changes and impacts on the quality of care. Design A cross-sectional online survey gathering both quantitative and qualitative data about structures and processes for medical revalidation and wider quality management in the organisations which employ or contract with doctors (termed 'designated bodies') from the senior doctor in each organisation with statutory responsibility for medical revalidation (termed the 'Responsible Officer'). Setting United Kingdom Participants Responsible Officers in designated bodies in the United Kingdom. Five hundred and ninety-five survey invitations were sent and 374 completed surveys were returned (63%). Main outcome measures The role of Responsible Officers, the development of organisational mechanisms for quality assurance or improvement, decision-making on revalidation recommendations, impact of revalidation and mechanisms for quality assurance or improvement on clinical practice and suggested improvements to revalidation arrangements. Results Responsible Officers report that revalidation has had some impacts on the way medical performance is assured and improved, particularly strengthening appraisal and oversight of quality within organisations and having some impact on clinical practice. They suggest changes to make revalidation less 'one size fits all' and more responsive to individual, organisational and professional contexts. Conclusions Revalidation appears primarily to have improved systems for quality improvement and the management of poor performance to date. There is more to be done to ensure it produces wider benefits, particularly in relation to doctors who already perform well.

The visible, near-infrared and short wave infrared channels of the EarthCARE multi-spectral imager

NASA Astrophysics Data System (ADS)

Doornink, J.; de Goeij, B.; Marinescu, O.; Meijer, E.; Vink, R.; van Werkhoven, W.; van't Hof, A.

2017-11-01

The EarthCARE satellite mission objective is the observation of clouds and aerosols from low Earth orbit. The payload will include active remote sensing instruments being the W-band Cloud Profiling Radar (CPR) and the ATLID LIDAR. These are supported by the passive instruments Broadband Radiometer (BBR) and the Multispectral Imager (MSI) providing the radiometric and spatial context of the ground scene being probed. The MSI will form Earth images over a swath width of 150 km; it will image the Earth atmosphere in 7 spectral bands. The MSI instrument consists of two parts: the Visible, Near infrared and Short wave infrared (VNS) unit, and the Thermal InfraRed (TIR) unit. Subject of this paper is the VNS unit. In the VNS optical unit, the ground scene is imaged in four spectral bands onto four linear detectors via separate optical channels. Driving requirements for the VNS instrument performance are the spectral sensitivity including out-of-band rejection, the MTF, co-registration and the inter-channel radiometric accuracy. The radiometric accuracy performance of the VNS is supported by in-orbit calibration, in which direct solar radiation is fed into the instrument via a set of quasi volume diffusers. The compact optical concept with challenging stability requirements together with the strict thermal constraints have led to a sophisticated opto-mechanical design. This paper, being the second of a sequence of two on the Multispectral Imager describes the VNS instrument concept chosen to fulfil the performance requirements within the resource and accommodation constraints.

Performance estimation of an oil-free linear compressor unit for a new compact 2K Gifford-McMahon cryocooler

NASA Astrophysics Data System (ADS)

Hiratsuka, Y.; Bao, Q.; Y Xu, M.

2017-12-01

Since 2012, a new, compact Gifford-McMahon (GM) cryocooler for cooling superconducting single photon detectors (SSPD) has been developed and reported by Sumitomo Heavy Industries, Ltd. (SHI). Also, it was reported that National Institute of Information and Communications Technology (NICT) developed a multi-channel, conduction-cooled SSPD system. However, the size and power consumption reduction becomes indispensable to apply such a system to the optical communication of AdHoc for a mobile system installed in a vehicle. The objective is to reduce the total height of the expander by 33% relative to the existing RDK-101 GM expander and to reduce the total volume of the compressor unit by 50% relative to the existing CNA-11 compressor. In addition, considering the targeted cooling application, we set the design cooling capacity targets of the first and the second stages 1 W at 60 K and 20 mW at 2.3 K respectively. In 2016, Hiratsuka et al. reported that an oil-free compressor was developed for a 2K GM cryocooler. The cooling performance of a 2K GM expander driven by an experimental unit of the linear compressor was measured. No-load temperature less than 2.1 K and the cooling capacity of 20 mW at 2.3 K were successfully achieved with an electric input power of only 1.1 kW. After that, the compressor capsule and the heat exchanger, etc. were assembled into one enclosure as a compressor unit. The total volume of the compressor unit and electrical box was significantly reduced to about 38 L, which was close to the target of 35 L. Also, the sound noise, vibration characteristics, the effect of the compressor unit inclination and the ambient temperature on the cooling performance, were evaluated. The detailed experimental results are discussed in this paper.

Cluster analysis of Southeastern U.S. climate stations

NASA Astrophysics Data System (ADS)

Stooksbury, D. E.; Michaels, P. J.

1991-09-01

A two-step cluster analysis of 449 Southeastern climate stations is used to objectively determine general climate clusters (groups of climate stations) for eight southeastern states. The purpose is objectively to define regions of climatic homogeneity that should perform more robustly in subsequent climatic impact models. This type of analysis has been successfully used in many related climate research problems including the determination of corn/climate districts in Iowa (Ortiz-Valdez, 1985) and the classification of synoptic climate types (Davis, 1988). These general climate clusters may be more appropriate for climate research than the standard climate divisions (CD) groupings of climate stations, which are modifications of the agro-economic United States Department of Agriculture crop reporting districts. Unlike the CD's, these objectively determined climate clusters are not restricted by state borders and thus have reduced multicollinearity which makes them more appropriate for the study of the impact of climate and climatic change.

Acquiring Spectra of Solar System Objects with the NIRSpec Instrument on the James Webb Space Telescope

NASA Astrophysics Data System (ADS)

Proffitt, Charles R.; Birkmann, Stephan; Ferruit, Pierre; Guilbert, Aurelie; Holler, Bryan J.; Stansberry, John

2017-10-01

The NIRSpec Instrument on the James Webb Space Telescope will allow near-IR spectroscopy in the wavelength range between 0.6 and 5.3 microns with resolving power of ~100, 1000, or 2700. We review strategies for performing spectral observations of solar system objects using each of NIRSpec's available observing modes, including the integral field unit (IFU), multi-Object Spectroscopy (MOS), and fixed slit (FS) templates, and discuss how the choice of mode affects the limiting target brightness as well as the detailed wavelength and spatial coverage obtained. We also discuss the expected pointing accuracy and target acquisition options for moving targets, including the use and limitations of the Wide Aperture Target Acquisition (WATA) capability and of the pre-defined field points that will be available for use with the MOS template to enable the use of custom micro-shutter patterns including ones emulating very long slits.

A pressure ulcer and fall rate quality composite index for acute care units: A measure development study.

PubMed

Boyle, Diane K; Jayawardhana, Ananda; Burman, Mary E; Dunton, Nancy E; Staggs, Vincent S; Bergquist-Beringer, Sandra; Gajewski, Byron J

2016-11-01

Composite indices are single measures that combine the strengths of two or more individual measures and provide broader, easy-to-use measures for evaluation of provider performance and comparisons across units and hospitals to support quality improvement. The study objective was to develop a unit-level inpatient composite nursing care quality performance index-the Pressure Ulcer and Fall Rate Quality Composite Index. Two-phase measure development study. 5144 patient care units in 857 United States hospitals participating in the National Database of Nursing Quality Indictors ® during the year 2013. The Pressure Ulcer and Fall Rate Quality Composite Index was developed in two phases. In Phase 1 the formula was generated using a utility function and generalized penalty analysis. Experts with experience in healthcare quality measurement provided the point of indicator equivalence. In Phase 2 initial validity evidence was gathered based on hypothesized relationships between the Pressure Ulcer and Fall Rate Quality Composite Index and other variables using two-level (unit, hospital) hierarchical linear mixed modeling. The Pressure Ulcer and Fall Rate Quality Composite Index=100-PUR-FR, where PUR is pressure ulcer rate and FR is total fall rate. Higher scores indicate better quality. Bland-Altman plots demonstrated agreement between pairs of experts and provided evidence for inter-rater reliability of the formula. The validation process demonstrated that higher registered nurse skill mix, higher percent of registered nurses with a baccalaureate in nursing or higher degree, higher percent of registered nurses with national specialty certification, and lower percent of hours supplied by agency staff were significantly associated with higher Pressure Ulcer and Fall Rate Quality Composite Index scores. Higher percentages of unit patients at risk for a hospital-acquired pressure ulcer and higher unit rates of physical restraint use were not associated with higher Pressure Ulcer and Fall Rate Quality Composite Index scores. The Pressure Ulcer and Fall Rate Quality Composite Index is a step toward providing a more holistic perspective of unit level nursing quality than individual measures and may help nurses nursing administrators obtain a broader view of which patient care units are the higher and lower performers. Further study is needed to examine the usability of the Pressure Ulcer and Fall Rate Quality Composite Index. Copyright © 2016 The Authors. Published by Elsevier Ltd.. All rights reserved.

A Fast MHD Code for Gravitationally Stratified Media using Graphical Processing Units: SMAUG

NASA Astrophysics Data System (ADS)

Griffiths, M. K.; Fedun, V.; Erdélyi, R.

2015-03-01

Parallelization techniques have been exploited most successfully by the gaming/graphics industry with the adoption of graphical processing units (GPUs), possessing hundreds of processor cores. The opportunity has been recognized by the computational sciences and engineering communities, who have recently harnessed successfully the numerical performance of GPUs. For example, parallel magnetohydrodynamic (MHD) algorithms are important for numerical modelling of highly inhomogeneous solar, astrophysical and geophysical plasmas. Here, we describe the implementation of SMAUG, the Sheffield Magnetohydrodynamics Algorithm Using GPUs. SMAUG is a 1-3D MHD code capable of modelling magnetized and gravitationally stratified plasma. The objective of this paper is to present the numerical methods and techniques used for porting the code to this novel and highly parallel compute architecture. The methods employed are justified by the performance benchmarks and validation results demonstrating that the code successfully simulates the physics for a range of test scenarios including a full 3D realistic model of wave propagation in the solar atmosphere.

S-Band propagation measurements

NASA Technical Reports Server (NTRS)

Briskman, Robert D.

1994-01-01

A geosynchronous satellite system capable of providing many channels of digital audio radio service (DARS) to mobile platforms within the contiguous United States using S-band radio frequencies is being implemented. The system is designed uniquely to mitigate both multipath fading and outages from physical blockage in the transmission path by use of satellite spatial diversity in combination with radio frequency and time diversity. The system also employs a satellite orbital geometry wherein all mobile platforms in the contiguous United States have elevation angles greater than 20 deg to both of the diversity satellites. Since implementation of the satellite system will require three years, an emulation has been performed using terrestrial facilities in order to allow evaluation of DARS capabilities in advance of satellite system operations. The major objective of the emulation was to prove the feasibility of broadcasting from satellites 30 channels of CD quality programming using S-band frequencies to an automobile equipped with a small disk antenna and to obtain quantitative performance data on S-band propagation in a satellite spatial diversity system.

[Testing system design and analysis for the execution units of anti-thrombotic device].

PubMed

Li, Zhelong; Cui, Haipo; Shang, Kun; Liao, Yuehua; Zhou, Xun

2015-02-01

In an anti-thrombotic pressure circulatory device, relays and solenoid valves serve as core execution units. Thus the therapeutic efficacy and patient safety of the device will directly depend on their performance. A new type of testing system for relays and solenoid valves used in the anti-thrombotic device has been developed, which can test action response time and fatigue performance of relay and solenoid valve. PC, data acquisition card and test platform are used in this testing system based on human-computer interaction testing modules. The testing objectives are realized by using the virtual instrument technology, the high-speed data acquisition technology and reasonable software design. The two sets of the system made by relay and solenoid valve are tested. The results proved the universality and reliability of the testing system so that these relays and solenoid valves could be accurately used in the antithrombotic pressure circulatory equipment. The newly-developed testing system has a bright future in the aspects of promotion and application prospect.

Eye health care in Hungary.

PubMed

Németh, J; Molnár, F; Kocur, I

2002-01-01

To describe eye health-care services provided by in patient Departments of Ophthalmology in Hungary as of 1998. A standardised questionnaire was sent to all Hungarian in-patient ophthalmic departments. The response rate was 100%, and data from six university departments and 56 hospitals with ophthalmic units are summarised. During the 12-month period, a total of 78,008 ophthalmic operations were performed, by 489 ophthalmologists. They worked in 62 in-patient ophthalmic units having a total of 1952 beds. The cataract rate was 3564 operations per million inhabitants; intraocular lens implantation was performed on 97% of the cases. There were 591 corneal transplants, 1698 operations for retinal detachment and 510 vitrectomies for diabetic eye complications. The level of ophthalmic care in Hungary, judged on the basis of key objective parameters including number of ophthalmic specialists, number of ophthalmic beds, and the rates of surgery, generally conforms to standards prevailing in Western Europe, in spite of financial difficulties and the consequent lack of investment in new equipment and instruments, both major and minor.

In-plant testing of membranes to treat electroplating wastewater

NASA Technical Reports Server (NTRS)

Shah, D. B.; Talu, Orhan

1995-01-01

This is the final report submitted for the work performed under the NASA Cooperative Agreement NCC3-301 for the project entitled 'In-Plant Testing of Membranes To Treat Electroplating Waste water'. The main objective of the research project was to determine if the crosslinked polyacrylic acid salt films developed by NASA scientists could be used for heavy metal removal from the wastewater generated by the metals-finishing or electroplating industry. A variety of tasks identified in the original proposal were completed. These included: (1) analysis of our industrial partner Aetna Plating's zinc electroplating process and its wastewater treatment needs for zinc removal; (2) design and construction of a laboratory-scale unit to continuously supply and remove the ion exchange films from the zinc wastewater; (3) performance of a series of runs on such a unit to determine its operating characteristics; and (4) design of a prototype unit for use at the industrial site. In addition, there were a number of tasks that had not been identified in the original proposal but were later judged to be necessary for the successful completion of the project. These were: (1) batch equilibrium and kinetic experiments with analysis of the experimental results to accurately determine the equilibrium and kinetic parameters for the ion exchange films; (2 ) simulation studies for proper design of the prototype unit; and (3) preliminary runs to exchange the films from H form to Calcium form.

Analysis of the mechanical behavior of a titanium scaffold with a repeating unit-cell substructure.

PubMed

Ryan, Garrett; McGarry, Patrick; Pandit, Abhay; Apatsidis, Dimitrios

2009-08-01

Titanium scaffolds with controlled microarchitecture have been developed for load bearing orthopedic applications. The controlled microarchitecture refers to a repeating array of unit-cells, composed of sintered titanium powder, which make up the scaffold structure. The objective of this current research was to characterize the mechanical performance of three scaffolds with increasing porosity, using finite element analysis (FEA) and to compare the results with experimental data. Scaffolds were scanned using microcomputed tomography and FEA models were generated from the resulting computer models. Macroscale and unit-cell models of the scaffolds were created. The material properties of the sintered titanium powders were first evaluated in mechanical tests and the data used in the FEA. The macroscale and unit-cell FEA models proved to be a good predictor of Young's modulus and yield strength. Although macroscale models showed similar failure patterns and an expected trend in UCS, strain at UCS did not compare well with experimental data. Since a rapid prototyping method was used to create the scaffolds, the original CAD geometries of the scaffold were also evaluated using FEA but they did not reflect the mechanical properties of the physical scaffolds. This indicates that at present, determining the actual geometry of the scaffold through computed tomography imaging is important. Finally, a fatigue analysis was performed on the scaffold to simulate the loading conditions it would experience as a spinal interbody fusion device.

Drilling on the Moon and Mars: Developing the Science Approach for Subsurface Exploration with Human Crews

NASA Technical Reports Server (NTRS)

Stoker, C. R.; Zavaleta, J.; Bell, M.; Direto, S.; Foing, B.; Blake, D.; Kim, S.

2010-01-01

DOMEX (Drilling on the Moon and Mars in Human Exploration) is using analog missions to develop the approach for using human crews to perform science activities on the Moon and Mars involving exploration and sampling of the subsurface. Subsurface science is an important activity that may be uniquely enabled by human crews. DOMEX provides an opportunity to plan and execute planetary mission science activities without the expense and overhead of a planetary mission. Objectives: The objective of this first in a series of DOMEX missions were to 1) explore the regional area to understand the geologic context and determine stratigraphy and geologic history of various geologic units in the area. 2) Explore for and characterize sites for deploying a deep (10 m depth) drilling system in a subsequent field season. 3) Perform GPR on candidate drill sites. 4) Select sites that represent different geological units deposited in different epochs and collect soil cores using sterile procedures for mineralogical, organic and biological analysis. 5) Operate the MUM in 3 different sites representing different geological units and soil characteristics. 6) Collect rock and soil samples of sites visited and analyze them at the habitat. Results: At mission start the crew performed a regional survey to identify major geologic units that were correlated to recognized stratigraphy and regional geologic maps. Several candidate drill sites were identified. During the rest of the mission, successful GPR surveys were conducted in four locations. Soil cores were collected in 5 locations representing soils from 4 different geologic units, to depths up to 1m. Soil cores from two locations were analyzed with PCR in the laboratory. The remainder were reserved for subsequent analysis. XRD analysis was performed in the habitat and in the field on 39 samples, to assist with sample characterization, conservation, and archiving. MUM was deployed at 3 field locations and 1 test location (outside the habitat) where it operated autonomously for 2-4 hours at each site. Depths achieved ranged from 15 to 70 cm depending on the soil compressive strength and the presence and depth of subsurface indurated layers. Subsurface samples weighing 0.5 to 1 g were collected at the deepest depth encountered at each of the sites using the MUM automated sample collection system, and subsequently analyzed with XRD. Downhole inspection of holes produced by MUM with the Raman spectrometer was acquired on two of the holes and spectral features associated with selenite were identified in specific soil layers. Previously unreported fossilized remains of vertebrate fauna from the Jurassic era were discovered during our mission. Analysis of mineral biomarkers associated with this discovery are underway.

Community unit performance: factors associated with childhood diarrhea and appropriate treatment in Nyanza Province, Kenya.

PubMed

Kawakatsu, Yoshito; Tanaka, Junichi; Ogawa, Kazuya; Ogendo, Kenneth; Honda, Sumihisa

2017-02-16

The government of Kenya launched its community health strategy in 2006 to improve certain aspects of its community health program. Under the strategy, community units (CUs) were established as level one of the Kenyan health system. A core member at this level is the community health worker (CHW). The objective of this study was to assess the relationship among the performance of the CUs, the prevalence of childhood diarrhea and appropriate treatment for it by controlling individual and community-level factors. The main dataset used in this study was the 2011 Nyanza Province county-based Multiple Indicator Cluster Survey (MICS). In addition, based on the list of community units in Nyanza Province, Kenya, we identified the area's CUs and their performance. MICS data and data on CUs were merged using sub-location names. There were 17 individual and two community-level independent variables in this study. Bivariate analysis and a multilevel logistic regression were performed. Factors significantly associated with a lower prevalence of diarrhea among children under five were the child's increasing age, middle-aged household heads, children who received more attention, water treatment and rural versus urban area residence, while male children and highly performing CUs were significantly associated with a higher prevalence of diarrhea. In addition, middle wealth index, severity of diarrhea and middle- and high-CU performance were significantly associated with appropriate treatment for childhood diarrhea. Although this study found that children living in areas of high CU performance were more likely to have diarrhea, these areas would have been identified as being more at risk for diarrhea prevalence and other health concerns, prioritized for the establishment of a CU and allocated more resources to improve the performance of CUs. A higher CU performance was significantly associated with the appropriate treatment. It was suggested that CHWs could have a positive effect on the community, as demonstrated and promoted by appropriate health-seeking behavior and treatment for childhood diarrhea.

How Well Does Dual-Energy Computed Tomography With Metal Artifact Reduction Software Improve Image Quality and Quantify Computed Tomography Number and Iodine Concentration?

PubMed

Ohira, Shingo; Kanayama, Naoyuki; Wada, Kentaro; Karino, Tsukasa; Nitta, Yuya; Ueda, Yoshihiro; Miyazaki, Masayoshi; Koizumi, Masahiko; Teshima, Teruki

2018-04-02

The objective of this study was to assess the accuracy of the quantitative measurements obtained using dual-energy computed tomography with metal artifact reduction software (MARS). Dual-energy computed tomography scans (fast kV-switching) are performed on a phantom, by varying the number of metal rods (Ti and Pb) and reference iodine materials. Objective and subjective image analyses are performed on retroreconstructed virtual monochromatic images (VMIs) (VMI at 70 keV). The maximum artifact indices for VMI-Ti and VMI-Pb (5 metal rods) with MARS (without MARS) were 17.4 (166.7) and 34.6 (810.6), respectively; MARS significantly improved the mean subjective 5-point score (P < 0.05). The maximum differences between the measured Hounsfield unit and theoretical values for 5 mg/mL iodine and 2-mm core rods were -42.2% and -68.5%, for VMI-Ti and VMI-Pb (5 metal rods), respectively, and the corresponding differences in the iodine concentration were -64.7% and -73.0%, respectively. Metal artifact reduction software improved the objective and subjective image quality; however, the quantitative values were underestimated.