Transfer of strength and power training to sports performance.

PubMed

Young, Warren B

2006-06-01

The purposes of this review are to identify the factors that contribute to the transference of strength and power training to sports performance and to provide resistance-training guidelines. Using sprinting performance as an example, exercises involving bilateral contractions of the leg muscles resulting in vertical movement, such as squats and jump squats, have minimal transfer to performance. However, plyometric training, including unilateral exercises and horizontal movement of the whole body, elicits significant increases in sprint acceleration performance, thus highlighting the importance of movement pattern and contraction velocity specificity. Relatively large gains in power output in nonspecific movements (intramuscular coordination) can be accompanied by small changes in sprint performance. Research on neural adaptations to resistance training indicates that intermuscular coordination is an important component in achieving transfer to sports skills. Although the specificity of resistance training is important, general strength training is potentially useful for the purposes of increasing body mass, decreasing the risk of soft-tissue injuries, and developing core stability. Hypertrophy and general power exercises can enhance sports performance, but optimal transfer from training also requires a specific exercise program.

Heat transfer and pressure drop characteristics of the tube bank fin heat exchanger with fin punched with flow redistributors and curved triangular vortex generators

NASA Astrophysics Data System (ADS)

Liu, Song; Jin, Hua; Song, KeWei; Wang, LiangChen; Wu, Xiang; Wang, LiangBi

2017-10-01

The heat transfer performance of the tube bank fin heat exchanger is limited by the air-side thermal resistance. Thus, enhancing the air-side heat transfer is an effective method to improve the performance of the heat exchanger. A new fin pattern with flow redistributors and curved triangular vortex generators is experimentally studied in this paper. The effects of the flow redistributors located in front of the tube stagnation point and the curved vortex generators located around the tube on the characteristics of heat transfer and pressure drop are discussed in detail. A performance comparison is also carried out between the fins with and without flow redistributors. The experimental results show that the flow redistributors stamped out from the fin in front of the tube stagnation points can decrease the friction factor at the cost of decreasing the heat transfer performance. Whether the combination of the flow redistributors and the curved vortex generators will present a better heat transfer performance depends on the size of the curved vortex generators. As for the studied two sizes of vortex generators, the heat transfer performance is promoted by the flow redistributors for the fin with larger size of vortex generators and the performance is suppressed by the flow redistributors for the fin with smaller vortex generators.

Data Transfer Advisor with Transport Profiling Optimization

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rao, Nageswara S.; Liu, Qiang; Yun, Daqing

The network infrastructures have been rapidly upgraded in many high-performance networks (HPNs). However, such infrastructure investment has not led to corresponding performance improvement in big data transfer, especially at the application layer, largely due to the complexity of optimizing transport control on end hosts. We design and implement ProbData, a PRofiling Optimization Based DAta Transfer Advisor, to help users determine the most effective data transfer method with the most appropriate control parameter values to achieve the best data transfer performance. ProbData employs a profiling optimization based approach to exploit the optimal operational zone of various data transfer methods in supportmore » of big data transfer in extreme scale scientific applications. We present a theoretical framework of the optimized profiling approach employed in ProbData as wellas its detailed design and implementation. The advising procedure and performance benefits of ProbData are illustrated and evaluated by proof-of-concept experiments in real-life networks.« less

Particle shape effect on heat transfer performance in an oscillating heat pipe.

PubMed

Ji, Yulong; Wilson, Corey; Chen, Hsiu-Hung; Ma, Hongbin

2011-04-05

The effect of alumina nanoparticles on the heat transfer performance of an oscillating heat pipe (OHP) was investigated experimentally. A binary mixture of ethylene glycol (EG) and deionized water (50/50 by volume) was used as the base fluid for the OHP. Four types of nanoparticles with shapes of platelet, blade, cylinder, and brick were studied, respectively. Experimental results show that the alumina nanoparticles added in the OHP significantly affect the heat transfer performance and it depends on the particle shape and volume fraction. When the OHP was charged with EG and cylinder-like alumina nanoparticles, the OHP can achieve the best heat transfer performance among four types of particles investigated herein. In addition, even though previous research found that these alumina nanofluids were not beneficial in laminar or turbulent flow mode, they can enhance the heat transfer performance of an OHP.

Particle shape effect on heat transfer performance in an oscillating heat pipe

PubMed Central

2011-01-01

The effect of alumina nanoparticles on the heat transfer performance of an oscillating heat pipe (OHP) was investigated experimentally. A binary mixture of ethylene glycol (EG) and deionized water (50/50 by volume) was used as the base fluid for the OHP. Four types of nanoparticles with shapes of platelet, blade, cylinder, and brick were studied, respectively. Experimental results show that the alumina nanoparticles added in the OHP significantly affect the heat transfer performance and it depends on the particle shape and volume fraction. When the OHP was charged with EG and cylinder-like alumina nanoparticles, the OHP can achieve the best heat transfer performance among four types of particles investigated herein. In addition, even though previous research found that these alumina nanofluids were not beneficial in laminar or turbulent flow mode, they can enhance the heat transfer performance of an OHP. PMID:21711830

Fault-tolerant bandwidth reservation strategies for data transfers in high-performance networks

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zuo, Liudong; Zhu, Michelle M.; Wu, Chase Q.

2016-11-22

Many next-generation e-science applications need fast and reliable transfer of large volumes of data with guaranteed performance, which is typically enabled by the bandwidth reservation service in high-performance networks. One prominent issue in such network environments with large footprints is that node and link failures are inevitable, hence potentially degrading the quality of data transfer. We consider two generic types of bandwidth reservation requests (BRRs) concerning data transfer reliability: (i) to achieve the highest data transfer reliability under a given data transfer deadline, and (ii) to achieve the earliest data transfer completion time while satisfying a given data transfer reliabilitymore » requirement. We propose two periodic bandwidth reservation algorithms with rigorous optimality proofs to optimize the scheduling of individual BRRs within BRR batches. The efficacy of the proposed algorithms is illustrated through extensive simulations in comparison with scheduling algorithms widely adopted in production networks in terms of various performance metrics.« less

Using dual tasks to test immediate transfer of training between naturalistic movements: a proof-of-principle study.

PubMed

Schaefer, Sydney Y; Lang, Catherine E

2012-01-01

Theories of motor learning predict that training a movement reduces the amount of attention needed for its performance (i.e., more automatic). If training one movement transfers, then the amount of attention needed for performing a second movement should also be reduced, as measured under dual task conditions. The authors' purpose was to test whether dual task paradigms are feasible for detecting transfer of training between two naturalistic movements. Immediately following motor training, subjects improved performance of a second untrained movement under single and dual task conditions. Subjects with no training did not. Improved performance in the untrained movement was likely due to transfer, and suggests that dual tasks may be feasible for detecting transfer between naturalistic actions.

WWC Review of the Report "Transfer Incentives for High-Performing Teachers: Final Results from a Multisite Randomized Experiment." What Works Clearinghouse Single Study Review

ERIC Educational Resources Information Center

What Works Clearinghouse, 2015

2015-01-01

For the 2013 study, "Transfer Incentives for High-Performing Teachers: Final Results from a Multisite Randomized Experiment," researchers examined the impact of the Talent Transfer Initiative (TTI) on students' reading and mathematics achievement in 10 school districts. The TTI enabled principals of low-performing schools to provide…

Lesions of the rat nucleus basalis magnocellularis disrupt appetitive-to-aversive transfer learning.

PubMed

Butt, A E; Schultz, J A; Arnold, L L; Garman, E E; George, C L; Garraghty, P E

2003-01-01

Rats with selective lesions of the nucleus basalis magnocellularis (NBM) and sham-lesion control animals were tested in an operant appetitive-to-aversive transfer task. We hypothesized that NBM lesions would not affect performance in the appetitive phase, but that performance would be impaired during subsequent transfer to the aversive phase of the task. Additional groups of NBM lesion and control rats were tested in the avoidance condition only, where we hypothesized that NBM lesions would not disrupt performance. These hypotheses were based on the argument that the NBM is not necessary for simple association learning that does not tax attention. Both the appetitive phase of the transfer task and the avoidance only task depend only on simple associative learning and are argued not to tax attention. Consequently, performance in these tasks was predicted to be spared following NBM lesions. Complex, attention-demanding associative learning, however, is argued to depend on the NBM. Performance in the aversive phase of the transfer task is both attentionally demanding and associatively more complex than in either the appetitive or aversive tasks alone; thus, avoidance performance in the NBM lesion group was predicted to be impaired following transfer from prior appetitive conditioning. Results supported our hypotheses, with the NBM lesion group acquiring the appetitive response normally, but showing impaired performance following transfer to the aversive conditioning phase of the transfer task. Impairments were not attributable to disrupted avoidance learning per se, as avoidance behavior was normal in the NBM lesion group tested in the avoidance condition only.

VCCS Transfer Project: Transfer Rates, Transfer Performance, and Baccalaureate Completion.

ERIC Educational Resources Information Center

McHewitt, Earl R.; Taylor, Garry

This document analyzes a study done by the Center for the Study of Community Colleges (CSCC), which examined transfer rates in the VCCS. The document provides definitions for transfer rate, academic performance, and completion rate as they are used in the study. The study answers the following questions: (1) which pool of students were used in the…

To transfer or not to transfer? Investigating the combined effects of trainee characteristics, team leader support, and team climate.

PubMed

Smith-Jentsch, K A; Salas, E; Brannick, M T

2001-04-01

Eighty pilots participated in a study of variables influencing the transfer process. Posttraining performance was assessed in a flight simulation under 1 of 2 conditions. Those in the maximum performance condition were made aware of the skill to be assessed and the fact that their teammates were confederates, whereas those in the typical performance condition were not. The results indicated that (a) simulator ratings correlated with a measure of transfer to the cockpit for those in the typical condition only; (b) team leader support, manipulated in a pretask brief, moderated the disparity between maximum and typical performance; (c) team climate mediated the impact of support on performance in the typical condition; (d) those with a stronger predisposition toward the trained skill viewed their climate as more supportive; and (e) perceptions of team climate were better predictors of performance for those with a more external locus of control.

Metacognition and Transfer: Keys to Improving Marketing Education

ERIC Educational Resources Information Center

Ramocki, Stephen P.

2007-01-01

A primary purpose of marketing education is to prepare students to perform throughout their careers, and performance largely relies on transferability of knowledge. It has been demonstrated that training in metacognition, along with emphasis on transfer, does lead to increased probability that knowledge will be transferred into environments…

Heat transfer mechanisms in pulsating heat-pipes with nanofluid

NASA Astrophysics Data System (ADS)

Gonzalez, Miguel; Kelly, Brian; Hayashi, Yoshikazu; Kim, Yoon Jo

2015-01-01

In this study, the effect of silver nanofluid on a pulsating heat-pipe (PHP) thermal performance was experimentally investigated to figure out how nanofluid works with PHP. A closed loop PHP was built with 3 mm diameter tubes. Thermocouples and pressure transducers were installed for fluid and surface temperature and pressure measurements. The operating temperature of the PHP varied from 30-100 °C, with power rates of 61 W and 119 W. The fill ratio of 30%, 50%, and 70% were tested. The results showed that the evaporator heat transfer performance was degraded by the addition of nanoparticles due to increased viscosity at high power rate, while the positive effects of high thermal conductivity and enhanced nucleate boiling worked better at low power rate. In the condenser section, owing to the relatively high liquid content, nanofluid more effectively improved the heat transfer performance. However, since the PHP performance was dominantly affected by evaporator heat transfer performance, the overall benefit of enhanced condenser section performance was greatly limited. It was also observed that the poor heat transfer performance with nanofluid at the evaporator section led to lower operating pressure of PHP.

Transfer as a function of exploration and stabilization in original practice.

PubMed

Pacheco, Matheus M; Newell, Karl M

2015-12-01

The identification of practice conditions that provide flexibility to perform successfully in transfer is a long-standing issue in motor learning but is still not well understood. Here we investigated the hypothesis that a search strategy that encompasses both exploration and stabilization of the perceptual-motor workspace will enhance performance in transfer. Twenty-two participants practiced a virtual projection task (120 trials on each of 3 days) and subsequently performed two transfer conditions (20 trials/condition) with different constraints in the angle to project the object. The findings revealed a quadratic relation between exploration in practice (indexed by autocorrelation and distribution of error) and subsequent performance error in transfer. The integration of exploration and stabilization of the perceptual-motor workspace enhances transfer to tasks with different constraints on the scaling of motor output. Copyright © 2015 Elsevier B.V. All rights reserved.

Using dual tasks to test immediate transfer of training between naturalistic movements: A proof-of-principle study

PubMed Central

Schaefer, Sydney Y.; Lang, Catherine E.

2012-01-01

Theories of motor learning predict that training a movement reduces the amount of attention needed for its performance (i.e. more automatic). If training one movement transfers, then the amount of attention needed for performing a second movement should also be reduced, as measured under dual task conditions. The purpose of this study was to test whether dual task paradigms are feasible for detecting transfer of training between two naturalistic movements. Immediately following motor training, subjects improved performance of a second untrained movement under both single and dual task conditions. Subjects with no training did not. Improved performance in the untrained movement was likely due to transfer, and suggests that dual tasks may be feasible for detecting transfer between naturalistic actions. PMID:22934682

Toe-to-hand transfer: Evolving Indications and Relevant Outcomes

PubMed Central

Waljee, Jennifer F.; Chung, Kevin C.

2014-01-01

In the late 19th century, the first toe to hand transfer was performed in Vienna, Switzerland as a staged procedure by Nicolandi.(1) Since that time, the advent of microsurgery has revolutionized toe to hand transfers. In 1966, Buncke performed the first microvascular toe to thumb transfer in a rhesus monkey.(2) The first toe to thumb transfer using microsurgical techniques in humans was performed by Cobbett in 1969, followed shortly thereafter by the first transfer of a second toe to the thumb position.(3,4) Today, due to expanding microsurgical techniques and surgeon innovation, the indications and techniques for toe-to-hand transfer procedures continue to evolve and now encompass patients with a variety of acquired and congenital hand defects.(5) PMID:23790426

Attrition and performance of community college transfers

PubMed Central

Aulck, Lovenoor; West, Jevin

2017-01-01

Community colleges are an important part of the US higher education landscape, yet the aptitude and preparedness of student transfers to baccalaureate institutions is often called into question. Examining transcript records and demographic information of nearly 70,000 students across over 15 years of registrar records at a public university, this study performed a descriptive analysis of the persistence, performance, and academic migration patterns of community college transfers, transfers from four-year institutions, and freshmen entrants. We found little difference between community college transfers and freshmen entrants in terms of post-transfer grades and persistence. Transfers from four-year institutions had higher grades but also had higher attrition rates than their peers. This study also found no strong evidence of transfer shock on students’ post-transfer grades. When examining the tendencies of students to shift fields of study during their educational pursuits, the academic migration patterns of transfer students were more concentrated than those of freshmen entrants. PMID:28407002

Strategies for Maximizing Successful Drug Substance Technology Transfer Using Engineering, Shake-Down, and Wet Test Runs.

PubMed

Abraham, Sushil; Bain, David; Bowers, John; Larivee, Victor; Leira, Francisco; Xie, Jasmina

2015-01-01

The technology transfer of biological products is a complex process requiring control of multiple unit operations and parameters to ensure product quality and process performance. To achieve product commercialization, the technology transfer sending unit must successfully transfer knowledge about both the product and the process to the receiving unit. A key strategy for maximizing successful scale-up and transfer efforts is the effective use of engineering and shake-down runs to confirm operational performance and product quality prior to embarking on good manufacturing practice runs such as process performance qualification runs. We consider key factors to consider in making the decision to perform shake-down or engineering runs. We also present industry benchmarking results of how engineering runs are used in drug substance technology transfers alongside the main themes and best practices that have emerged. Our goal is to provide companies with a framework for ensuring the "right first time" technology transfers with effective deployment of resources within increasingly aggressive timeline constraints. © PDA, Inc. 2015.

Successful twin delivery following transmyometrial embryo transfer in a patient with a false uterine cavity.

PubMed

Muñoz, Manuel; Galindo, Noemí; Pérez-Cano, Inmaculada; Cruz, María; García-Velasco, Juan Antonio

2014-02-01

A successful pregnancy is the greatest goal for reproductive medicine. The probability that pregnancy occurs during a cycle of assisted reproduction is a function of multiple factors, of which embryo transfer is one of the most critical steps in these treatments. This article reports a case of successful pregnancy and twin delivery by transmyometrial embryo transfer after IVF in a woman with a neocavity parallel to the uterine cavity, which prevented the transfer of embryos to the correct place. The patient first went to another fertility centre where embryo transfer was impossible to perform because the cervix could not be canalized. Subsequently in this study clinic, after considering the difficulty of inserting a catheter into the endometrial cavity, a trial transfer was performed, which discovered a false route parallel to endometrial cavity. Following a first cycle in which conventional transcervical embryo transfer was performed, a transmyometrial embryo transfer was carried out and the patient became pregnant with twins. In cases where transcervical embryo transfer is very difficult or impossible to perform, the value of transmyometrial transfer is self-evident. Copyright © 2013 Reproductive Healthcare Ltd. Published by Elsevier Ltd. All rights reserved.

76 FR 23631 - Proposed Collection; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-27

... non-compliance with the Commission's minimum performance standards regarding registered transfer agents, and (2) to assure that issuers are aware of certain problems and poor performances with respect... notice of a registered transfer agent's failure to comply with the Commission's minimum performance...

An Elegant Sufficiency: Load-Aware Differentiated Scheduling of Data Transfers

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kettimuthu, Rajkumar; Vardoyan, Gayane; Agrawal, Gagan

2015-11-15

We investigate the file transfer scheduling problem, where transfers among different endpoints must be scheduled to maximize pertinent metrics. We propose two new algorithms that exploit the fact that the aggregate bandwidth obtained over a network or at a storage system tends to increase with the number of concurrent transfers—but only up to a certain limit. The first algorithm, SEAL, uses runtime information and data-driven models to approximate system load and adapt transfer schedules and concurrency so as to maximize performance while avoiding saturation. We implement this algorithm using GridFTP as the transfer protocol and evaluate it using real transfermore » logs in a production WAN environment. Results show that SEAL can improve average slowdowns and turnaround times by up to 25% and worst-case slowdown and turnaround times by up to 50%, compared with the best-performing baseline scheme. Our second algorithm, STEAL, further leverages user-supplied categorization of transfers as either “interactive” (requiring immediate processing) or “batch” (less time-critical). Results show that STEAL reduces the average slowdown of interactive transfers by 63% compared to the best-performing baseline and by 21% compared to SEAL. For batch transfers, compared to the best-performing baseline, STEAL improves by 18% the utilization of the bandwidth unused by interactive transfers. By elegantly ensuring a sufficient, but not excessive, allocation of concurrency to the right transfers, we significantly improve overall performance despite constraints.« less

[Perinatal regional hotline organisation and rate of perinatal transfer. Results from 2003 and 2004 in the French Rhône-Alpes area: A two year study of 4079 transfers].

PubMed

Dupuis, O; Gaucherand, P; Mellier, G

2006-11-01

This study aims to describe the organization that was implemented at the Rhône-Alpes perinatal hotline, as well as to describe in utero transfer and neonate transport from an epidemiological point of view. A cohort study was performed between January 2003 and December 2004. Every in utero transfer and neonate transport was included. Transfers performed in 2003 were compared to transfers performed in 2004. Three endpoints were defined: the rate of in utero transfer (number of in utero transfers/number of in utero transfers + number of neonatal transfers), the rate of transfer toward level II units (number of transfers from level I to level II/number of transfers from level I to level II + number of transfers from level I to level III) as well as the rate of intra network transfer (number of intra network transfers/number of intra network transfers + number of extra network transfers). In 2003, 865 in utero transfers (IUT) and 1297 neonate transports (NT) were performed, in 2004 848 IUT and 1069 NT were performed. The rate of in utero transfer significantly increased from 40 to 44.2% in 2004 (865/2162 versus 848/1917, p = 0.007). The rate of transfer toward level II units increased for the mothers from 31.8% to 36.9% (177/557 versus 174/471, p = 0.09) and significantly increased for the neonates from 43.2 to 51.6% in 2004 (335/775 versus 327/633, p = 0.002). Finally the rate of intra network transfer has not significantly changed: for the IUT it decreased from 87 to 86% (755/865 versus 732/848, p = 0.59) and for the NT from 91% to 90% (1179/1297 versus 963/1069, p = 0.45). The organization that was implemented allows not only a safe 24 hour on call management of maternal transfers as well as neonate transport, but also a precise knowledge of epidemiologic indications relative to perinatal transfer.

SHOOT performance testing. [Superfluid Helium On-Orbit Transfer Flight Demonstration

NASA Technical Reports Server (NTRS)

Dipirro, M. J.; Shirron, P. J.; Volz, S. M.; Schein, M. E.

1991-01-01

The Superfluid Helium On-Orbit Transfer (SHOOT) Flight Demonstration is a shuttle attached payload designed to demonstrate the technology necessary to resupply liquid helium dewars in space. Many SHOOT components will also have use in other aerospace cryogenic systems. The first of two SHOOT dewar systems has been fabricated. The ground performance testing of this dewar is described. The performance tests include measurements of heat leak, impedances of the two vent lines, heat pulse mass gauging accuracy, and superfluid transfer parameters such as flow rate and efficiency. A laboratory dewar was substituted for the second flight dewar for the transfer tests. These tests enable a precise analytical model of the transfer process to be verified. SHOOT performance is thus quantified, except for components such as the liquid acquisition devices and a phase separator which cannot be verified in one gravity.

Quiet eye training improves surgical knot tying more than traditional technical training: a randomized controlled study.

PubMed

Causer, Joe; Harvey, Adrian; Snelgrove, Ryan; Arsenault, Gina; Vickers, Joan N

2014-08-01

We examined the effectiveness of technical training (TT) and quiet eye training (QE) on the performance of one-handed square knot tying in surgical residents. Twenty surgical residents were randomly assigned to the 2 groups and completed pretest, training, retention, and transfer tests. Participants wore a mobile eye tracker that simultaneously recorded their gaze and hand movements. Dependent variables were knot tying performance (%), QE duration (%), number of fixations, total movement time (s), and hand movement phase time (s). The QE training group had significantly higher performance scores, a longer QE duration, fewer fixations, faster total knot tying times, and faster movement phase times compared with the TT group. The QE group maintained performance in the transfer test, whereas the TT group significantly decreased performance from retention to transfer. QE training significantly improved learning, retention, and transfer of surgical knot tying compared with a traditional technical approach. Both performance effectiveness (performance outcome) and movement efficiency (hand movement times) were improved using QE modeling, instruction, and feedback. Copyright © 2014 Elsevier Inc. All rights reserved.

Modeling the Performance of Water-Zeolite 13X Adsorption Heat Pump

NASA Astrophysics Data System (ADS)

Kowalska, Kinga; Ambrożek, Bogdan

2017-12-01

The dynamic performance of cylindrical double-tube adsorption heat pump is numerically analysed using a non-equilibrium model, which takes into account both heat and mass transfer processes. The model includes conservation equations for: heat transfer in heating/cooling fluids, heat transfer in the metal tube, and heat and mass transfer in the adsorbent. The mathematical model is numerically solved using the method of lines. Numerical simulations are performed for the system water-zeolite 13X, chosen as the working pair. The effect of the evaporator and condenser temperatures on the adsorption and desorption kinetics is examined. The results of the numerical investigation show that both of these parameters have a significant effect on the adsorption heat pump performance. Based on computer simulation results, the values of the coefficients of performance for heating and cooling are calculated. The results show that adsorption heat pumps have relatively low efficiency compared to other heat pumps. The value of the coefficient of performance for heating is higher than for cooling

Evaluation of cooling performance of impinging jet array over various dimpled surfaces

NASA Astrophysics Data System (ADS)

Kim, Sun-Min; Kim, Kwang-Yong

2016-04-01

Various configurations of an impinging jet-dimple array cooling system were evaluated in terms of their heat transfer and pressure drop performances. The steady incompressible laminar flow and heat transfer in the cooling system were analyzed using three-dimensional Navier-Stokes equations. The obtained numerical results were validated by a comparison with experimental data for the local Nusselt number distribution. The area-averaged Nusselt number on the projected area and the pressure drop through the system were selected as the performance parameters. Among the four tested configurations—inline concave, staggered concave, inline convex, and staggered convex—the staggered convex impinging jet-dimple array showed the best heat transfer performance whereas the staggered-concave configuration showed the lowest pressure drop. A parametric study with two geometric variables, i.e., the height of dimple and the diameter of dimple, was also conducted for the staggered-convex impinging jet-dimple array. As a result, the best heat transfer and pressure drop performances were achieved when the ratio of the height of dimple to the diameter of jet was 0.8. And, the increase in the ratio of the diameter of dimple to the diameter of jet yielded monotonous increase in the heat transfer performance.

76 FR 38431 - Submission for OMB Review; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-30

... Commission's minimum performance standards regarding registered transfer agents, and (2) to assure that issuers are aware of certain problems and poor performances with respect to the transfer agents that are... failure to comply with the Commission's minimum performance standards then the issuer will be unable to...

Acquisition, retention and transfer of simulated laparoscopic tasks using fNIR and a contextual interference paradigm.

PubMed

Shewokis, Patricia A; Shariff, Faiz U; Liu, Yichuan; Ayaz, Hasan; Castellanos, Andres; Lind, D Scott

2017-02-01

Using functional near infrared spectroscopy, a noninvasive, optical brain imaging tool that monitors changes in hemodynamics within the prefrontal cortex (PFC), we assessed performance and cognitive effort during the acquisition, retention and transfer of multiple simulated laparoscopic tasks by novice learners within a contextual interference paradigm. Third-year medical students (n = 10) were randomized to either a blocked or random practice schedule. Across 3 days, students performed 108 acquisition trials of 3 laparoscopic tasks on the LapSim ® simulator followed by delayed retention and transfer tests. Performance metrics (Global score, Total time) and hemodynamic responses (total hemoglobin (μm)) were assessed during skill acquisition, retention and transfer. All acquisition tasks resulted in significant practice schedule X trial block interactions for the left medial anterior PFC. During retention and transfer, random performed the skills in less time and had lower total hemoglobin change in the right dorsolateral PFC than blocked. Compared with blocked, random practice resulted in enhanced learning through better performance and less cognitive load for retention and transfer of simulated laparoscopic tasks. Copyright © 2016 Elsevier Inc. All rights reserved.

Training Attentional Control Improves Cognitive and Motor Task Performance.

PubMed

Ducrocq, Emmanuel; Wilson, Mark; Vine, Sam; Derakshan, Nazanin

2016-10-01

Attentional control is a necessary function for the regulation of goal-directed behavior. In three experiments we investigated whether training inhibitory control using a visual search task could improve task-specific measures of attentional control and performance. In Experiment 1 results revealed that training elicited a near-transfer effect, improving performance on a cognitive (antisaccade) task assessing inhibitory control. In Experiment 2 an initial far-transfer effect of training was observed on an index of attentional control validated for tennis. The principal aim of Experiment 3 was to expand on these findings by assessing objective gaze measures of inhibitory control during the performance of a tennis task. Training improved inhibitory control and performance when pressure was elevated, confirming the mechanisms by which cognitive anxiety impacts performance. These results suggest that attentional control training can improve inhibition and reduce taskspecific distractibility with promise of transfer to more efficient sporting performance in competitive contexts.

Are training and transfer effects of working memory updating training modulated by achievement motivation?

PubMed

Zhao, Xin; Xu, Yiwenjie; Fu, Junjun; Maes, Joseph H R

2018-04-01

Previous studies examining effects of working memory (WM) updating training revealed mixed results. One factor that might modulate training gains, and possibly also transfer of those gains to non-trained cognitive tasks, is achievement motivation. In the present Studies 1 and 2, students with either a high (HAM) or low (LAM) achievement motivation completed a 14-day visuospatial WM updating training program. In Study 2, the students also performed a set of tasks measuring other executive functions and fluid intelligence prior to and after training. In both studies, the HAM students displayed a larger training gain than the LAM students. Study 2 revealed that after training, both groups showed better performance on the near-transfer but not far-transfer tasks. Importantly, the differential training gain was not associated with better post-training performance for the HAM compared to the LAM students on any of the transfer tasks. These results are taken to support a modulatory role of achievement motivation on WM training benefits, but not on transfer of those benefits to other tasks. Possible reasons for the general improvement on the near-transfer tasks and the absence of a modulatory role of achievement motivation on transfer-task performance are discussed.

Advanced patient transfer assist device with intuitive interaction control.

PubMed

Humphreys, Heather C; Choi, Young Mi; Book, Wayne J

2017-10-24

This research aims to improve patient transfers by developing a new type of advanced robotic assist device. It has multiple actuated degrees of freedom and a powered steerable base to maximize maneuverability around obstacles. An intuitive interface and control strategy allows the caregiver to simply push on the machine in the direction of desired patient motion. The control integrates measurements of both force and proximity to mitigate any potential large collision forces and provides operators information about obstacles with a form of haptic feedback. Electro-hydraulic pump controlled actuation provides high force density for the actuation. Nineteen participants performed tests to compare transfer operations (transferring a 250-lb mannequin between a wheelchair, chair, bed, and floor) and interaction control of a prototype device with a commercially available patient lift. The testing included a time study of the transfer operations and subjective rating of device performance. The results show that operators perform transfer tasks significantly faster and rate performance higher using the prototype patient transfer assist device than with a current market patient lift. With further development, features of the new patient lift can help facilitate patient transfers that are safer, easier, and more efficient for caregivers.

Transfer of Learning: A Guide for Strengthening the Performance of Health Care Workers.

ERIC Educational Resources Information Center

Nelson, David, Ed.; Dufour, Wendy, Ed.

This document shares strategies and techniques that can facilitate transfer of learning among health care workers. The guide begins with a discussion of reasons why "good" training fails and lists possible interventions for addressing the following performance factors: job expectations; performance feedback; physical environment and…

A Survey of Ballistic Transfers to Low Lunar Orbit

NASA Technical Reports Server (NTRS)

Parker, Jeffrey S.; Anderson, Rodney L.; Peterson, Andrew

2011-01-01

A simple strategy is identified to generate ballistic transfers between the Earth and Moon, i.e., transfers that perform two maneuvers: a trans-lunar injection maneuver to depart the Earth and a Lunar Orbit Insertion maneuver to insert into orbit at the Moon. This strategy is used to survey the performance of numerous transfers between varying Earth parking orbits and varying low lunar target orbits. The transfers surveyed include short 3-6 day direct transfers, longer 3-4 month low energy transfers, and variants that include Earth phasing orbits and/or lunar flybys.

Disk brake design for cooling improvement using Computational Fluid Dynamics (CFD)

NASA Astrophysics Data System (ADS)

Munisamy, Kannan M.; Shafik, Ramel

2013-06-01

The car disk brake design is improved with two different blade designs compared to the baseline blade design. The two designs were simulated in Computational fluid dynamics (CFD) to obtain heat transfer properties such as Nusselt number and Heat transfer coefficient. The heat transfer property is compared against the baseline design. The improved shape has the highest heat transfer performance. The curved design is inferior to baseline design in heat transfer performance.

Improving Heat Transfer Performance of Printed Circuit Boards

NASA Technical Reports Server (NTRS)

Schatzel, Donald V.

2009-01-01

This paper will explore the ability of printed circuit boards laminated with a Carbon Core Laminate to transfer heat vs. standard printed circuit boards that use only thick layers of copper. The paper will compare the differences in heat transfer performance of printed circuit boards with and without CCL.

Inter-Individual Knowledge Transfer and Performance in Product Development

ERIC Educational Resources Information Center

Kumar, Ajith; Ganesh, L. S.

2011-01-01

Purpose: This paper aims to examine how knowledge transfer between individuals influences performance in product development (PD) organizations and whether this influence is contingent to the degree of novelty in the PD work. Design/methodology/approach: A set of hypotheses describing the relationships between knowledge transfer by codification…

Strategic Involuntary Teacher Transfers and Teacher Performance: Examining Equity and Efficiency

ERIC Educational Resources Information Center

Grissom, Jason A.; Loeb, Susanna; Nakashima, Nathaniel A.

2014-01-01

Despite claims that school districts need flexibility in teacher assignment to allocate teachers more equitably across schools and improve district performance, the power to involuntarily transfer teachers across schools remains hotly contested. Little research has examined involuntary teacher transfer policies or their effects on schools,…

76 FR 70516 - Proposed Collection; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-14

... Budget for extension and approval. Rule 17Ad-6 requires every registered transfer agent to make and keep... taken to perform transfer agent activities (to ensure compliance with the minimum performance standards... appointment or termination of the transfer agent; (4) stop orders or notices of adverse claims to the...

European two-way satellite time transfer experiments using the INTELSAT (VA-F13) satellite at 307{degree}E

DOE Office of Scientific and Technical Information (OSTI.GOV)

Davis, J.A.; Pearce, P.R.; Kirchner, D.

1994-12-31

A Two Way Satellite Time and Frequency Transfer (TWSTFT) experiment performed between six European laboratories is reported. The characteristics of the time transfers undertaken between each pair of laboratory earth stations has been determined. Multiple time transfer and ranging experiments were performed to determine both systematic errors and delay instabilities in the TWSTFT system.

Predicting spacecraft multilayer insulation performance from heat transfer measurements

NASA Technical Reports Server (NTRS)

Stimpson, L. D.; Hagemeyer, W. A.

1974-01-01

Multilayer insulation (MLI) ideally consists of a series of radiation shields with low-conductivity spacers. When MLI blankets were installed on cryogenic tanks or spacecraft, a large discrepancy between the calorimeter measurements and the performance of the installed blankets was discovered. It was found that discontinuities such as exposed edges coupled with high lateral heat transfer created 'heat leaks' which overshadowed the basic heat transfer of the insulation. Approaches leading to improved performance predictions of MLI units are discussed.

Technology transfer from biomedical research to clinical practice: measuring innovation performance.

PubMed

Balas, E Andrew; Elkin, Peter L

2013-12-01

Studies documented 17 years of transfer time from clinical trials to practice of care. Launched in 2002, the National Institutes of Health (NIH) translational research initiative needs to develop metrics for impact assessment. A recent White House report highlighted that research and development productivity is declining as a result of increased research spending while the new drugs output is flat. The goal of this study was to develop an expanded model of research-based innovation and performance thresholds of transfer from research to practice. Models for transfer of research to practice have been collected and reviewed. Subsequently, innovation pathways have been specified based on common characteristics. An integrated, intellectual property transfer model is described. The central but often disregarded role of research innovation disclosure is highlighted. Measures of research transfer and milestones of progress have been identified based on the Association of University Technology Managers 2012 performance reports. Numeric milestones of technology transfer are recommended at threshold (top 50%), target (top 25%), and stretch goal (top 10%) performance levels. Transfer measures and corresponding target levels include research spending to disclosure (<$1.88 million), disclosure to patents (>0.81), patents to start-up (>0.1), patents to licenses (>2.25), and average per license income (>$48,000). Several limitations of measurement are described. Academic institutions should take strategic steps to bring innovation to the center of scholarly discussions. Research on research, particularly on pathways to disclosures, is needed to improve R&D productivity. Researchers should be informed about the technology transfer performance of their institution and regulations should better support innovators.

Training transfer: scientific background and insights for practical application.

PubMed

Issurin, Vladimir B

2013-08-01

Training transfer as an enduring, multilateral, and practically important problem encompasses a large body of research findings and experience, which characterize the process by which improving performance in certain exercises/tasks can affect the performance in alternative exercises or motor tasks. This problem is of paramount importance for the theory of training and for all aspects of its application in practice. Ultimately, training transfer determines how useful or useless each given exercise is for the targeted athletic performance. The methodological background of training transfer encompasses basic concepts related to transfer modality, i.e., positive, neutral, and negative; the generalization of training responses and their persistence over time; factors affecting training transfer such as personality, motivation, social environment, etc. Training transfer in sport is clearly differentiated with regard to the enhancement of motor skills and the development of motor abilities. The studies of bilateral skill transfer have shown cross-transfer effects following one-limb training associated with neural adaptations at cortical, subcortical, spinal, and segmental levels. Implementation of advanced sport technologies such as motor imagery, biofeedback, and exercising in artificial environments can facilitate and reinforce training transfer from appropriate motor tasks to targeted athletic performance. Training transfer of motor abilities has been studied with regard to contralateral effects following one limb training, cross-transfer induced by arm or leg training, the impact of strength/power training on the preparedness of endurance athletes, and the impact of endurance workloads on strength/power performance. The extensive research findings characterizing the interactions of these workloads have shown positive transfer, or its absence, depending on whether the combinations conform to sport-specific demands and physiological adaptations. Finally, cross-training as a form of concurrent exercising in different athletic disciplines has been examined in reference to the enhancement of general fitness, the preparation of recreational athletes, and the preparation of athletes for multi-sport activities such as triathlon, duathlon, etc.

Numerical Analysis of Coolant Flow and Heat Transfer in ITER Diagnostic First Wall

DOE Office of Scientific and Technical Information (OSTI.GOV)

Khodak, A.; Loesser, G.; Zhai, Y.

2015-07-24

We performed numerical simulations of the ITER Diagnostic First Wall (DFW) using ANSYS workbench. During operation DFW will include solid main body as well as liquid coolant. Thus thermal and hydraulic analysis of the DFW was performed using conjugated heat transfer approach, in which heat transfer was resolved in both solid and liquid parts, and simultaneously fluid dynamics analysis was performed only in the liquid part. This approach includes interface between solid and liquid part of the systemAnalysis was performed using ANSYS CFX software. CFX software allows solution of heat transfer equations in solid and liquid part, and solution ofmore » the flow equations in the liquid part. Coolant flow in the DFW was assumed turbulent and was resolved using Reynolds averaged Navier-Stokes equations with Shear Stress Transport turbulence model. Meshing was performed using CFX method available within ANSYS. The data cloud for thermal loading consisting of volumetric heating and surface heating was imported into CFX Volumetric heating source was generated using Attila software. Surface heating was obtained using radiation heat transfer analysis. Our results allowed us to identify areas of excessive heating. Proposals for cooling channel relocation were made. Additional suggestions were made to improve hydraulic performance of the cooling system.« less

Improving Data Transfer Throughput with Direct Search Optimization

DOE Office of Scientific and Technical Information (OSTI.GOV)

Balaprakash, Prasanna; Morozov, Vitali; Kettimuthu, Rajkumar

2016-01-01

Improving data transfer throughput over high-speed long-distance networks has become increasingly difficult. Numerous factors such as nondeterministic congestion, dynamics of the transfer protocol, and multiuser and multitask source and destination endpoints, as well as interactions among these factors, contribute to this difficulty. A promising approach to improving throughput consists in using parallel streams at the application layer.We formulate and solve the problem of choosing the number of such streams from a mathematical optimization perspective. We propose the use of direct search methods, a class of easy-to-implement and light-weight mathematical optimization algorithms, to improve the performance of data transfers by dynamicallymore » adapting the number of parallel streams in a manner that does not require domain expertise, instrumentation, analytical models, or historic data. We apply our method to transfers performed with the GridFTP protocol, and illustrate the effectiveness of the proposed algorithm when used within Globus, a state-of-the-art data transfer tool, on productionWAN links and servers. We show that when compared to user default settings our direct search methods can achieve up to 10x performance improvement under certain conditions. We also show that our method can overcome performance degradation due to external compute and network load on source end points, a common scenario at high performance computing facilities.« less

Effects of Small-Group Learning on Transfer: A Meta-Analysis

ERIC Educational Resources Information Center

Pai, Hui-Hua; Sears, David A.; Maeda, Yukiko

2015-01-01

This study investigated the potential benefit of small-group learning on transfer performance using the method of meta-analysis. Results showed positive support for the hypothesis that small-group learning can increase students' transfer performance (average effect size of 0.30). Unlike reviews of effects of cooperation on learning, this…

Academic Performance of Transfer Versus "Native" Students in Natural Resources & Sciences

ERIC Educational Resources Information Center

Johnson, Matthew D.

2005-01-01

Transfer students comprise a substantial component of the student body in many 4-year academic colleges, but the factors affecting students' success once they have transferred are poorly understood. Using data from standard university records, academic performance was examined for 2,467 students enrolled in natural resource majors at a mid-sized…

AATA AOS evaluation : transfer and on-time performance study : before and after AOS implementation, October 1996 - May 1999

DOT National Transportation Integrated Search

1999-01-01

This study develops, using data before AOS in 1996 and 1997 and after AOS in 1998 and 1999, implementation data on AATAs on-time performance and vehicle-to-vehicle timing of transfers at four major transfer location. Systematic evaluation of on-ti...

Large-Scale Studies on the Transferability of General Problem-Solving Skills and the Pedagogic Potential of Physics

ERIC Educational Resources Information Center

Mashood, K. K.; Singh, Vijay A.

2013-01-01

Research suggests that problem-solving skills are transferable across domains. This claim, however, needs further empirical substantiation. We suggest correlation studies as a methodology for making preliminary inferences about transfer. The correlation of the physics performance of students with their performance in chemistry and mathematics in…

Data Storage and Transfer | High-Performance Computing | NREL

Science.gov Websites

High-Performance Computing (HPC) systems. Photo of computer server wiring and lights, blurred to show data. WinSCP for Windows File Transfers Use to transfer files from a local computer to a remote computer. Robinhood for File Management Use this tool to manage your data files on Peregrine. Best

Study on turbulent flow and heat transfer performance of tubes with internal fins in EGR cooler

NASA Astrophysics Data System (ADS)

Liu, Lin; Ling, Xiang; Peng, Hao

2015-07-01

In this paper, flow and heat transfer performances of the tubes with internal longitudinal fins in Exhaust Gas Recirculation (EGR ) cooler were investigated by three-dimension computation and experiment . Each test tube was a single-pipe structure, without inner tube. Three-dimension computation was performed to determine the thermal characteristics difference between the two kinds of tubes, that is, the tube with an inner solid staff as a blocked structure and the tube without the blocked structure. The effects of fin width and fin height on heat transfer and flow are examined. For proving the validity of numerical method, the calculated results were compared with corresponding experimental data. The tube-side friction factor and heat transfer coefficient were examined. As a result, the maximum deviations between the numerical results and the experimental data are approximately 5.4 % for friction factor and 8.6 % for heat transfer coefficient, respectively. It is found that two types of internally finned tubes enhance significantly heat transfer. The heat transfer of the tube with blocked structure is better, while the pressure drop of the tube without blocked structure is lower. The comprehensive performance of the unblocked tube is better to applied in EGR cooler.

Patterns of Transfer of Adaptation Among Body Segments

NASA Technical Reports Server (NTRS)

Seidler, R. D.; Bloomberg, J. J.; Stelmach, George E.

2000-01-01

Two experiments were conducted in order to determine the patterns of transfer of visuomotor adaptation between arm and head pointing. An altered gain of display of pointing movements was used to induce a conflict between visual and somatosensory representations. Two subject groups participated in Experiment One: group 1 adapted shoulder pointing movements, and group 2 adapted wrist pointing movements to a 0.5 gain of display. Following the adaptation regimen, subjects performed a transfer test in which the shoulder group performed wrist movements and the wrist group performed shoulder movements. The results demonstrated that both groups displayed typical adaptation curves, initially undershooting the target followed by a return to baseline performance. Transfer tests revealed that both groups had high transfer of the acquired adaptation to the other joint. Experiment Two followed a similar design except that group 1 adapted head pointing movements and group 2 adapted arm pointing movements. The arm adaptation had high transfer to head pointing while the head adaptation had very little transfer to arm pointing. These results imply that, while the arm segments may share a common target representation for goal-directed actions, individual but functionally dependent target representations may exist for the control of head and arm movements.

Heat transfer and performance characteristics of axial cooling fans with downstream guide vanes

NASA Astrophysics Data System (ADS)

Terzis, Alexandros; Stylianou, Ioannis; Kalfas, Anestis I.; Ott, Peter

2012-04-01

This study examines experimentally the effect of stators on the performance and heat transfer characteristics of small axial cooling fans. A single fan impeller, followed by nine stator blades in the case of a complete stage, was used for all the experimental configurations. Performance measurements were carried out in a constant speed stage performance test rig while the transient liquid crystal technique was used for the heat transfer measurements. Full surface heat transfer coefficient distributions were obtained by recording the temperature history of liquid crystals on a target plate. The experimental data indicated that the results are highly affected by the flow conditions at the fan outlet. Stators can be beneficial in terms of pressure drop and efficiency, and thus more economical operation, as well as, in the local heat transfer distribution at the wake of the stator blades if the fan is installed very close to the cooling object. However, as the separation distance increases, enhanced heat transfer rate in the order of 25% is observed in the case of the fan impeller.

Preliminary Comparison of Two-Way Satellite Time and Frequency Transfer and GPS Common-View Time Transfer During the INTELSAT Field Trial

NASA Technical Reports Server (NTRS)

Davis, John A.; Lewandowski, W.; DeYoung, James A.; Kirchner, Dieter; Hetzel, Peter; deJong, Gerrit; Soering, A.; Baumont, F.; Klepczynski, William; McKinley, Angela Davis;

Time transfer using NAVSTAR GPS

NASA Technical Reports Server (NTRS)

Vandierendock, A. J.; Hua, Q. D.; Mclean, J. R.; Denz, A. R.

1982-01-01

A time transfer unit (TTU) developed for the U.S. Naval Observatory (USNO) has consistently demonstrated the transfer of time with accuracies much better than 100 nanoseconds. A new time transfer system (TTS), the TTS 502 was developed. The TTS 502 is a relatively compact microprocessor-based system with a variety of options that meet each individual's requirements, and has the same performance as the USNO system. The time transfer performance of that USNO system and the details of the new system are presented.

Direct Numerical Simulation of Fluid Flow and Mass Transfer in Particle Clusters

PubMed Central

2018-01-01

In this paper, an efficient ghost-cell based immersed boundary method is applied to perform direct numerical simulation (DNS) of mass transfer problems in particle clusters. To be specific, a nine-sphere cuboid cluster and a random-generated spherical cluster consisting of 100 spheres are studied. In both cases, the cluster is composed of active catalysts and inert particles, and the mutual influence of particles on their mass transfer performance is studied. To simulate active catalysts the Dirichlet boundary condition is imposed at the external surface of spheres, while the zero-flux Neumann boundary condition is applied for inert particles. Through our studies, clustering is found to have negative influence on the mass transfer performance, which can be then improved by dilution with inert particles and higher Reynolds numbers. The distribution of active/inert particles may lead to large variations of the cluster mass transfer performance, and individual particle deep inside the cluster may possess a high Sherwood number. PMID:29657359

Effect of aerated concrete blockwork joints on the heat transfer performance uniformity

NASA Astrophysics Data System (ADS)

Pukhkal, Viktor; Murgul, Vera

2018-03-01

Analysis of data on the effect of joints of the aerated concrete blocks on the heat transfer uniformity of exterior walls was carried out. It was concluded, that the values of the heat transfer performance uniformity factor in the literature sources were obtained for the regular fragment of a wall construction by approximate addition of thermal conductivities. Heat flow patterns for the aerated concrete exterior walls amid different values of the thermal conductivity factors and design ambient air temperature of -26 °C were calculated with the use of "ELCUT" software for modelling of thermal patterns by finite element method. There were defined the values for the heat transfer performance uniformity factor, reduced total thermal resistance and heat-flux density for the exterior walls. The calculated values of the heat transfer performance uniformity factors, as a function of the coefficient of thermal conductivity of aerated concrete blocks, differ from the known data by a more rigorous thermal and physical substantiation.

A Review and Annotated Bibliography of Armor Gunnery Training Device Effectiveness Literature

DTIC Science & Technology

1993-11-01

training effectiveness (skill acquisition, skill reten-tion, performance prediction, transfer of training) and (b) research limitations (sample size...standalone, tank-appended, subcaliber, and laser) and four areas of training effectiveness (skill acquisition, skill retention, performance prediction, and...standalone, tank-appended, subcaliber, laser) and areas of training effectiveness (skill acquisition, skill retention, performance prediction, transfer of

Manual control analysis of drug effects on driving performance

NASA Technical Reports Server (NTRS)

Smiley, A.; Ziedman, K.; Moskowitz, H.

1981-01-01

The effects of secobarbital, diazepam, alcohol, and marihuana on car-driver transfer functions obtained using a driving simulator were studied. The first three substances, all CNS depressants, reduced gain, crossover frequency, and coherence which resulted in poorer tracking performance. Marihuana also impaired tracking performance but the only effect on the transfer function parameters was to reduce coherence.

Title I Public School Transfer May Potentially Harm Schools' Performance Ratings

ERIC Educational Resources Information Center

Freeman Willis, Viola Lorie

2009-01-01

The Title I public school transfer option has sparked many debates among educators. Although there are numerous studies that reveal mobility can hurt student performance, the federal No Child Left Behind (NCLB) law urges parents to move their children out of low performing Title I schools. Some school officials may not realize the implications the…

To transfer or not to transfer? Kinematics and laterality quotient predict interlimb transfer of motor learning

PubMed Central

Lefumat, Hannah Z.; Vercher, Jean-Louis; Miall, R. Chris; Cole, Jonathan; Buloup, Frank; Bringoux, Lionel; Bourdin, Christophe

2015-01-01

Humans can remarkably adapt their motor behavior to novel environmental conditions, yet it remains unclear which factors enable us to transfer what we have learned with one limb to the other. Here we tested the hypothesis that interlimb transfer of sensorimotor adaptation is determined by environmental conditions but also by individual characteristics. We specifically examined the adaptation of unconstrained reaching movements to a novel Coriolis, velocity-dependent force field. Right-handed subjects sat at the center of a rotating platform and performed forward reaching movements with the upper limb toward flashed visual targets in prerotation, per-rotation (i.e., adaptation), and postrotation tests. Here only the dominant arm was used during adaptation and interlimb transfer was assessed by comparing performance of the nondominant arm before and after dominant-arm adaptation. Vision and no-vision conditions did not significantly influence interlimb transfer of trajectory adaptation, which on average was significant but limited. We uncovered a substantial heterogeneity of interlimb transfer across subjects and found that interlimb transfer can be qualitatively and quantitatively predicted for each healthy young individual. A classifier showed that in our study, interlimb transfer could be predicted based on the subject's task performance, most notably motor variability during learning, and his or her laterality quotient. Positive correlations suggested that variability of motor performance and lateralization of arm movement control facilitate interlimb transfer. We further show that these individual characteristics can predict the presence and the magnitude of interlimb transfer of left-handers. Overall, this study suggests that individual characteristics shape the way the nervous system can generalize motor learning. PMID:26334018

Motor learning and cross-limb transfer rely upon distinct neural adaptation processes.

PubMed

Stöckel, Tino; Carroll, Timothy J; Summers, Jeffery J; Hinder, Mark R

2016-08-01

Performance benefits conferred in the untrained limb after unilateral motor practice are termed cross-limb transfer. Although the effect is robust, the neural mechanisms remain incompletely understood. In this study we used noninvasive brain stimulation to reveal that the neural adaptations that mediate motor learning in the trained limb are distinct from those that underlie cross-limb transfer to the opposite limb. Thirty-six participants practiced a ballistic motor task with their right index finger (150 trials), followed by intermittent theta-burst stimulation (iTBS) applied to the trained (contralateral) primary motor cortex (cM1 group), the untrained (ipsilateral) M1 (iM1 group), or the vertex (sham group). After stimulation, another 150 training trials were undertaken. Motor performance and corticospinal excitability were assessed before motor training, pre- and post-iTBS, and after the second training bout. For all groups, training significantly increased performance and excitability of the trained hand, and performance, but not excitability, of the untrained hand, indicating transfer at the level of task performance. The typical facilitatory effect of iTBS on MEPs was reversed for cM1, suggesting homeostatic metaplasticity, and prior performance gains in the trained hand were degraded, suggesting that iTBS interfered with learning. In stark contrast, iM1 iTBS facilitated both performance and excitability for the untrained hand. Importantly, the effects of cM1 and iM1 iTBS on behavior were exclusive to the hand contralateral to stimulation, suggesting that adaptations within the untrained M1 contribute to cross-limb transfer. However, the neural processes that mediate learning in the trained hemisphere vs. transfer in the untrained hemisphere appear distinct. Copyright © 2016 the American Physiological Society.

Motor learning and cross-limb transfer rely upon distinct neural adaptation processes

PubMed Central

Carroll, Timothy J.; Summers, Jeffery J.; Hinder, Mark R.

2016-01-01

Performance benefits conferred in the untrained limb after unilateral motor practice are termed cross-limb transfer. Although the effect is robust, the neural mechanisms remain incompletely understood. In this study we used noninvasive brain stimulation to reveal that the neural adaptations that mediate motor learning in the trained limb are distinct from those that underlie cross-limb transfer to the opposite limb. Thirty-six participants practiced a ballistic motor task with their right index finger (150 trials), followed by intermittent theta-burst stimulation (iTBS) applied to the trained (contralateral) primary motor cortex (cM1 group), the untrained (ipsilateral) M1 (iM1 group), or the vertex (sham group). After stimulation, another 150 training trials were undertaken. Motor performance and corticospinal excitability were assessed before motor training, pre- and post-iTBS, and after the second training bout. For all groups, training significantly increased performance and excitability of the trained hand, and performance, but not excitability, of the untrained hand, indicating transfer at the level of task performance. The typical facilitatory effect of iTBS on MEPs was reversed for cM1, suggesting homeostatic metaplasticity, and prior performance gains in the trained hand were degraded, suggesting that iTBS interfered with learning. In stark contrast, iM1 iTBS facilitated both performance and excitability for the untrained hand. Importantly, the effects of cM1 and iM1 iTBS on behavior were exclusive to the hand contralateral to stimulation, suggesting that adaptations within the untrained M1 contribute to cross-limb transfer. However, the neural processes that mediate learning in the trained hemisphere vs. transfer in the untrained hemisphere appear distinct. PMID:27169508

On improving the performance of nonphotochemical quenching in CP29 light-harvesting antenna complex

NASA Astrophysics Data System (ADS)

Berman, Gennady P.; Nesterov, Alexander I.; Sayre, Richard T.; Still, Susanne

2016-03-01

We model and simulate the performance of charge-transfer in nonphotochemical quenching (NPQ) in the CP29 light-harvesting antenna-complex associated with photosystem II (PSII). The model consists of five discrete excitonic energy states and two sinks, responsible for the potentially damaging processes and charge-transfer channels, respectively. We demonstrate that by varying (i) the parameters of the chlorophyll-based dimer, (ii) the resonant properties of the protein-solvent environment interaction, and (iii) the energy transfer rates to the sinks, one can significantly improve the performance of the NPQ. Our analysis suggests strategies for improving the performance of the NPQ in response to environmental changes, and may stimulate experimental verification.

Donor-Acceptor Distance Sampling Enhances the Performance of "Better than Nature" Nicotinamide Coenzyme Biomimetics.

PubMed

Geddes, Alexander; Paul, Caroline E; Hay, Sam; Hollmann, Frank; Scrutton, Nigel S

2016-09-07

Understanding the mechanisms of enzymatic hydride transfer with nicotinamide coenzyme biomimetics (NCBs) is critical to enhancing the performance of nicotinamide coenzyme-dependent biocatalysts. Here the temperature dependence of kinetic isotope effects (KIEs) for hydride transfer between "better than nature" NCBs and several ene reductase biocatalysts is used to indicate transfer by quantum mechanical tunneling. A strong correlation between rate constants and temperature dependence of the KIE (ΔΔH(⧧)) for H/D transfer implies that faster reactions with NCBs are associated with enhanced donor-acceptor distance sampling. Our analysis provides the first mechanistic insight into how NCBs can outperform their natural counterparts and emphasizes the need to optimize donor-acceptor distance sampling to obtain high catalytic performance from H-transfer enzymes.

Evaluating disparities in the U.S. technology transfer ecosystem to improve bench to business translation.

PubMed

Weis, James; Bashyam, Ashvin; Ekchian, Gregory J; Paisner, Kathryn; Vanderford, Nathan L

2018-01-01

Background: A large number of highly impactful technologies originated from academic research, and the transfer of inventions from academic institutions to private industry is a major driver of economic growth, and a catalyst for further discovery. However, there are significant inefficiencies in academic technology transfer. In this work, we conducted a data-driven assessment of translational activity across United States (U.S.) institutions to better understand how effective universities are in facilitating the transfer of new technologies into the marketplace. From this analysis, we provide recommendations to guide technology transfer policy making at both the university and national level. Methods: Using data from the Association of University Technology Managers U.S. Licensing Activity Survey, we defined a commercialization pipeline that reflects the typical path intellectual property takes; from initial research funding to startup formation and gross income. We use this pipeline to quantify the performance of academic institutions at each step of the process, as well as overall, and identify the top performing institutions via mean reciprocal rank. The corresponding distributions were visualized and disparities quantified using the Gini coefficient. Results: We found significant discrepancies in commercialization activity between institutions; a small number of institutions contribute to the vast majority of total commercialization activity. By examining select top performing institutions, we suggest improvements universities and technology transfer offices could implement to emulate the environment at these high-performing institutions. Conclusion: Significant disparities in technology transfer performance exist in which a select set of institutions produce a majority share of the total technology transfer activity. This disparity points to missed commercialization opportunities, and thus, further investigation into the distribution of technology transfer effectiveness across institutions and studies of policy changes that would improve the effectiveness of the commercialization pipeline is warranted.

Evaluating disparities in the U.S. technology transfer ecosystem to improve bench to business translation

PubMed Central

Paisner, Kathryn; Vanderford, Nathan L.

2018-01-01

Background: A large number of highly impactful technologies originated from academic research, and the transfer of inventions from academic institutions to private industry is a major driver of economic growth, and a catalyst for further discovery. However, there are significant inefficiencies in academic technology transfer. In this work, we conducted a data-driven assessment of translational activity across United States (U.S.) institutions to better understand how effective universities are in facilitating the transfer of new technologies into the marketplace. From this analysis, we provide recommendations to guide technology transfer policy making at both the university and national level. Methods: Using data from the Association of University Technology Managers U.S. Licensing Activity Survey, we defined a commercialization pipeline that reflects the typical path intellectual property takes; from initial research funding to startup formation and gross income. We use this pipeline to quantify the performance of academic institutions at each step of the process, as well as overall, and identify the top performing institutions via mean reciprocal rank. The corresponding distributions were visualized and disparities quantified using the Gini coefficient. Results: We found significant discrepancies in commercialization activity between institutions; a small number of institutions contribute to the vast majority of total commercialization activity. By examining select top performing institutions, we suggest improvements universities and technology transfer offices could implement to emulate the environment at these high-performing institutions. Conclusion: Significant disparities in technology transfer performance exist in which a select set of institutions produce a majority share of the total technology transfer activity. This disparity points to missed commercialization opportunities, and thus, further investigation into the distribution of technology transfer effectiveness across institutions and studies of policy changes that would improve the effectiveness of the commercialization pipeline is warranted. PMID:29721313

Multiple Business Ownership in the Norwegian Farm Sector: Resource Transfer and Performance Consequences

ERIC Educational Resources Information Center

Alsos, Gry Agnete; Carter, Sara

2006-01-01

This paper examines the case of multiple business ownership in the Norwegian farming sector, focusing on the extent of resource transfer between farms and their newly created ventures and the subsequent effects on the performance of these new ventures. The results demonstrate that substantial resource transfer takes place, mediated both by the…

Transfer of Expertise: An Eye Tracking and Think Aloud Study Using Dynamic Medical Visualizations

ERIC Educational Resources Information Center

Gegenfurtner, Andreas; Seppanen, Marko

2013-01-01

Expertise research has produced mixed results regarding the problem of transfer of expertise. Is expert performance context-bound or can the underlying processes be applied to more general situations? The present study tests whether expert performance and its underlying processes transfer to novel tasks within a domain. A mixed method study using…

Enhanced working memory performance via transcranial direct current stimulation: The possibility of near and far transfer

DOE Office of Scientific and Technical Information (OSTI.GOV)

Trumbo, Michael C.; Matzen, Laura E.; Coffman, Brian A.

Although working memory (WM) training programs consistently result in improvement on the trained task, benefit is typically short-lived and extends only to tasks very similar to the trained task (i.e., near transfer). It is possible that pairing repeated performance of a WM task with brain stimulation encourages plasticity in brain networks involved in WM task performance, thereby improving the training benefit. In the current study, transcranial direct current stimulation (tDCS) was paired with performance of a WM task (n-back). In Experiment 1, participants performed a spatial location-monitoring n-back during stimulation, while Experiment 2 used a verbal identity-monitoring n-back. In eachmore » experiment, participants received either active (2.0 mA) or sham (0.1 mA) stimulation with the anode placed over either the right or the left dorsolateral prefrontal cortex (DLPFC) and the cathode placed extracephalically. In Experiment 1, only participants receiving active stimulation with the anode placed over the right DLPFC showed marginal improvement on the trained spatial n-back, which did not extend to a near transfer (verbal n-back) or far transfer task (a matrix-reasoning task designed to measure fluid intelligence). Here, in Experiment 2, both left and right anode placements led to improvement, and right DLPFC stimulation resulted in numerical (though not sham-adjusted) improvement on the near transfer (spatial n-back) and far transfer (fluid intelligence) task. Results suggest that WM training paired with brain stimulation may result in cognitive enhancement that transfers to performance on other tasks, depending on the combination of training task and tDCS parameters used.« less

Enhanced working memory performance via transcranial direct current stimulation: The possibility of near and far transfer

DOE PAGES

Trumbo, Michael C.; Matzen, Laura E.; Coffman, Brian A.; ...

2016-10-15

Although working memory (WM) training programs consistently result in improvement on the trained task, benefit is typically short-lived and extends only to tasks very similar to the trained task (i.e., near transfer). It is possible that pairing repeated performance of a WM task with brain stimulation encourages plasticity in brain networks involved in WM task performance, thereby improving the training benefit. In the current study, transcranial direct current stimulation (tDCS) was paired with performance of a WM task (n-back). In Experiment 1, participants performed a spatial location-monitoring n-back during stimulation, while Experiment 2 used a verbal identity-monitoring n-back. In eachmore » experiment, participants received either active (2.0 mA) or sham (0.1 mA) stimulation with the anode placed over either the right or the left dorsolateral prefrontal cortex (DLPFC) and the cathode placed extracephalically. In Experiment 1, only participants receiving active stimulation with the anode placed over the right DLPFC showed marginal improvement on the trained spatial n-back, which did not extend to a near transfer (verbal n-back) or far transfer task (a matrix-reasoning task designed to measure fluid intelligence). Here, in Experiment 2, both left and right anode placements led to improvement, and right DLPFC stimulation resulted in numerical (though not sham-adjusted) improvement on the near transfer (spatial n-back) and far transfer (fluid intelligence) task. Results suggest that WM training paired with brain stimulation may result in cognitive enhancement that transfers to performance on other tasks, depending on the combination of training task and tDCS parameters used.« less

Enhanced working memory performance via transcranial direct current stimulation: The possibility of near and far transfer.

PubMed

Trumbo, Michael C; Matzen, Laura E; Coffman, Brian A; Hunter, Michael A; Jones, Aaron P; Robinson, Charles S H; Clark, Vincent P

2016-12-01

Although working memory (WM) training programs consistently result in improvement on the trained task, benefit is typically short-lived and extends only to tasks very similar to the trained task (i.e., near transfer). It is possible that pairing repeated performance of a WM task with brain stimulation encourages plasticity in brain networks involved in WM task performance, thereby improving the training benefit. In the current study, transcranial direct current stimulation (tDCS) was paired with performance of a WM task (n-back). In Experiment 1, participants performed a spatial location-monitoring n-back during stimulation, while Experiment 2 used a verbal identity-monitoring n-back. In each experiment, participants received either active (2.0mA) or sham (0.1mA) stimulation with the anode placed over either the right or the left dorsolateral prefrontal cortex (DLPFC) and the cathode placed extracephalically. In Experiment 1, only participants receiving active stimulation with the anode placed over the right DLPFC showed marginal improvement on the trained spatial n-back, which did not extend to a near transfer (verbal n-back) or far transfer task (a matrix-reasoning task designed to measure fluid intelligence). In Experiment 2, both left and right anode placements led to improvement, and right DLPFC stimulation resulted in numerical (though not sham-adjusted) improvement on the near transfer (spatial n-back) and far transfer (fluid intelligence) task. Results suggest that WM training paired with brain stimulation may result in cognitive enhancement that transfers to performance on other tasks, depending on the combination of training task and tDCS parameters used. Copyright © 2016 Elsevier Ltd. All rights reserved.

Liquid-Infused Smooth Surface for Improved Condensation Heat Transfer.

PubMed

Tsuchiya, Hirotaka; Tenjimbayashi, Mizuki; Moriya, Takeo; Yoshikawa, Ryohei; Sasaki, Kaichi; Togasawa, Ryo; Yamazaki, Taku; Manabe, Kengo; Shiratori, Seimei

2017-09-12

Control of vapor condensation properties is a promising approach to manage a crucial part of energy infrastructure conditions. Heat transfer by vapor condensation on superhydrophobic coatings has garnered attention, because dropwise condensation on superhydrophobic surfaces with rough structures leads to favorable heat-transfer performance. However, pinned condensed water droplets within the rough structure and a high thermodynamic energy barrier for nucleation of superhydrophobic surfaces limit their heat-transfer increase. Recently, slippery liquid-infused surfaces (SLIPS) have been investigated, because of their high water sliding ability and surface smoothness originating from the liquid layer. However, even on SLIPS, condensed water droplets are eventually pinned to degrade their heat-transfer properties after extended use, because the rough base layer is exposed as infused liquid is lost. Herein, we report a liquid-infused smooth surface named "SPLASH" (surface with π electron interaction liquid adsorption, smoothness, and hydrophobicity) to overcome the problems derived from the rough structures in previous approaches to obtain stable, high heat-transfer performance. The SPLASH displayed a maximum condensation heat-transfer coefficient that was 175% higher than that of an uncoated substrate. The SPLASH also showed higher heat-transfer performance and more stable dropwise condensation than superhydrophobic surfaces and SLIPS from the viewpoints of condensed water droplet mobility and the thermodynamic energy barrier for nucleation. The effects of liquid-infused surface roughness and liquid viscosity on condensation heat transfer were investigated to compare heat-transfer performance. This research will aid industrial applications using vapor condensation.

Transfer Learning of Classification Rules for Biomarker Discovery and Verification from Molecular Profiling Studies

PubMed Central

Ganchev, Philip; Malehorn, David; Bigbee, William L.; Gopalakrishnan, Vanathi

2013-01-01

We present a novel framework for integrative biomarker discovery from related but separate data sets created in biomarker profiling studies. The framework takes prior knowledge in the form of interpretable, modular rules, and uses them during the learning of rules on a new data set. The framework consists of two methods of transfer of knowledge from source to target data: transfer of whole rules and transfer of rule structures. We evaluated the methods on three pairs of data sets: one genomic and two proteomic. We used standard measures of classification performance and three novel measures of amount of transfer. Preliminary evaluation shows that whole-rule transfer improves classification performance over using the target data alone, especially when there is more source data than target data. It also improves performance over using the union of the data sets. PMID:21571094

Transfer Effects to a Multimodal Dual-Task after Working Memory Training and Associated Neural Correlates in Older Adults - A Pilot Study.

PubMed

Heinzel, Stephan; Rimpel, Jérôme; Stelzel, Christine; Rapp, Michael A

2017-01-01

Working memory (WM) performance declines with age. However, several studies have shown that WM training may lead to performance increases not only in the trained task, but also in untrained cognitive transfer tasks. It has been suggested that transfer effects occur if training task and transfer task share specific processing components that are supposedly processed in the same brain areas. In the current study, we investigated whether single-task WM training and training-related alterations in neural activity might support performance in a dual-task setting, thus assessing transfer effects to higher-order control processes in the context of dual-task coordination. A sample of older adults (age 60-72) was assigned to either a training or control group. The training group participated in 12 sessions of an adaptive n-back training. At pre and post-measurement, a multimodal dual-task was performed in all participants to assess transfer effects. This task consisted of two simultaneous delayed match to sample WM tasks using two different stimulus modalities (visual and auditory) that were performed either in isolation (single-task) or in conjunction (dual-task). A subgroup also participated in functional magnetic resonance imaging (fMRI) during the performance of the n-back task before and after training. While no transfer to single-task performance was found, dual-task costs in both the visual modality ( p < 0.05) and the auditory modality ( p < 0.05) decreased at post-measurement in the training but not in the control group. In the fMRI subgroup of the training participants, neural activity changes in left dorsolateral prefrontal cortex (DLPFC) during one-back predicted post-training auditory dual-task costs, while neural activity changes in right DLPFC during three-back predicted visual dual-task costs. Results might indicate an improvement in central executive processing that could facilitate both WM and dual-task coordination.

Transfer Effects to a Multimodal Dual-Task after Working Memory Training and Associated Neural Correlates in Older Adults – A Pilot Study

PubMed Central

Heinzel, Stephan; Rimpel, Jérôme; Stelzel, Christine; Rapp, Michael A.

2017-01-01

Working memory (WM) performance declines with age. However, several studies have shown that WM training may lead to performance increases not only in the trained task, but also in untrained cognitive transfer tasks. It has been suggested that transfer effects occur if training task and transfer task share specific processing components that are supposedly processed in the same brain areas. In the current study, we investigated whether single-task WM training and training-related alterations in neural activity might support performance in a dual-task setting, thus assessing transfer effects to higher-order control processes in the context of dual-task coordination. A sample of older adults (age 60–72) was assigned to either a training or control group. The training group participated in 12 sessions of an adaptive n-back training. At pre and post-measurement, a multimodal dual-task was performed in all participants to assess transfer effects. This task consisted of two simultaneous delayed match to sample WM tasks using two different stimulus modalities (visual and auditory) that were performed either in isolation (single-task) or in conjunction (dual-task). A subgroup also participated in functional magnetic resonance imaging (fMRI) during the performance of the n-back task before and after training. While no transfer to single-task performance was found, dual-task costs in both the visual modality (p < 0.05) and the auditory modality (p < 0.05) decreased at post-measurement in the training but not in the control group. In the fMRI subgroup of the training participants, neural activity changes in left dorsolateral prefrontal cortex (DLPFC) during one-back predicted post-training auditory dual-task costs, while neural activity changes in right DLPFC during three-back predicted visual dual-task costs. Results might indicate an improvement in central executive processing that could facilitate both WM and dual-task coordination. PMID:28286477

Using NVMe Gen3 PCIe SSD Cards in High-density Servers for High-performance Big Data Transfer Over Multiple Network Channels

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fang, Chin

This Technical Note describes how the Zettar team came up with a data transfer cluster design that convincingly proved the feasibility of using high-density servers for high-performance Big Data transfers. It then outlines the tests, operations, and observations that address a potential over-heating concern regarding the use of Non-Volatile Memory Host Controller Interface Specification (NVMHCI aka NVM Express or NVMe) Gen 3 PCIe SSD cards in high-density servers. Finally, it points out the possibility of developing a new generation of high-performance Science DMZ data transfer system for the data-intensive research community and commercial enterprises.

OrbView-3 Technical Performance Evaluation 2005: Modulation Transfer Function

NASA Technical Reports Server (NTRS)

Cole, Aaron

2007-01-01

The Technical performance evaluation of OrbView-3 using the Modulation Transfer Function (MTF) is presented. The contents include: 1) MTF Results and Methodology; 2) Radiometric Calibration Methodology; and 3) Relative Radiometric Assessment Results

mdtmFTP and its evaluation on ESNET SDN testbed

DOE PAGES

Zhang, Liang; Wu, Wenji; DeMar, Phil; ...

2017-04-21

In this paper, to address the high-performance challenges of data transfer in the big data era, we are developing and implementing mdtmFTP: a high-performance data transfer tool for big data. mdtmFTP has four salient features. First, it adopts an I/O centric architecture to execute data transfer tasks. Second, it more efficiently utilizes the underlying multicore platform through optimized thread scheduling. Third, it implements a large virtual file mechanism to address the lots-of-small-files (LOSF) problem. In conclusion, mdtmFTP integrates multiple optimization mechanisms, including–zero copy, asynchronous I/O, pipelining, batch processing, and pre-allocated buffer pools–to enhance performance. mdtmFTP has been extensively tested andmore » evaluated within the ESNET 100G testbed. Evaluations show that mdtmFTP can achieve higher performance than existing data transfer tools, such as GridFTP, FDT, and BBCP.« less

Indicators of University-Industry Knowledge Transfer Performance and Their Implications for Universities: Evidence from the United Kingdom

ERIC Educational Resources Information Center

Rossi, Federica; Rosli, Ainurul

2015-01-01

The issue of what indicators are most appropriate in order to measure the performance of universities in knowledge transfer (KT) activities remains relatively under-investigated. The main aim of this paper is to identify and discuss the limitations to the current measurements of university-industry KT performance, and propose some directions for…

A model for the transfer of perceptual-motor skill learning in human behaviors.

PubMed

Rosalie, Simon M; Müller, Sean

2012-09-01

This paper presents a preliminary model that outlines the mechanisms underlying the transfer of perceptual-motor skill learning in sport and everyday tasks. Perceptual-motor behavior is motivated by performance demands and evolves over time to increase the probability of success through adaptation. Performance demands at the time of an event create a unique transfer domain that specifies a range of potentially successful actions. Transfer comprises anticipatory subconscious and conscious mechanisms. The model also outlines how transfer occurs across a continuum, which depends on the individual's expertise and contextual variables occurring at the incidence of transfer

Performance analyses of helical coil heat exchangers. The effect of external coil surface modification on heat exchanger effectiveness

NASA Astrophysics Data System (ADS)

Andrzejczyk, Rafał; Muszyński, Tomasz

2016-12-01

The shell and coil heat exchangers are commonly used in heating, ventilation, nuclear industry, process plant, heat recovery and air conditioning systems. This type of recuperators benefits from simple construction, the low value of pressure drops and high heat transfer. In helical coil, centrifugal force is acting on the moving fluid due to the curvature of the tube results in the development. It has been long recognized that the heat transfer in the helical tube is much better than in the straight ones because of the occurrence of secondary flow in planes normal to the main flow inside the helical structure. Helical tubes show good performance in heat transfer enhancement, while the uniform curvature of spiral structure is inconvenient in pipe installation in heat exchangers. Authors have presented their own construction of shell and tube heat exchanger with intensified heat transfer. The purpose of this article is to assess the influence of the surface modification over the performance coefficient and effectiveness. The experiments have been performed for the steady-state heat transfer. Experimental data points were gathered for both laminar and turbulent flow, both for co current- and countercurrent flow arrangement. To find optimal heat transfer intensification on the shell-side authors applied the number of transfer units analysis.

Multiphysics Computational Analysis of a Solid-Core Nuclear Thermal Engine Thrust Chamber

NASA Technical Reports Server (NTRS)

Wang, Ten-See; Canabal, Francisco; Cheng, Gary; Chen, Yen-Sen

2007-01-01

The objective of this effort is to develop an efficient and accurate computational heat transfer methodology to predict thermal, fluid, and hydrogen environments for a hypothetical solid-core, nuclear thermal engine - the Small Engine. In addition, the effects of power profile and hydrogen conversion on heat transfer efficiency and thrust performance were also investigated. The computational methodology is based on an unstructured-grid, pressure-based, all speeds, chemically reacting, computational fluid dynamics platform, while formulations of conjugate heat transfer were implemented to describe the heat transfer from solid to hydrogen inside the solid-core reactor. The computational domain covers the entire thrust chamber so that the afore-mentioned heat transfer effects impact the thrust performance directly. The result shows that the computed core-exit gas temperature, specific impulse, and core pressure drop agree well with those of design data for the Small Engine. Finite-rate chemistry is very important in predicting the proper energy balance as naturally occurring hydrogen decomposition is endothermic. Locally strong hydrogen conversion associated with centralized power profile gives poor heat transfer efficiency and lower thrust performance. On the other hand, uniform hydrogen conversion associated with a more uniform radial power profile achieves higher heat transfer efficiency, and higher thrust performance.

Analysis of Condensation Heat Transfer Performance in Curved Triangle Microchannels Based on the Volume of Fluid Method

NASA Astrophysics Data System (ADS)

Lei, Yuchuan; Chen, Zhenqian; Shi, Juan

2017-12-01

Numerical simulations of condensation heat transfer of R134a in curved triangle microchannels with various curvatures are proposed. The model is established on the volume of fluid (VOF) approach and user-defined routines which including mass transfer at the vapor-liquid interface and latent heat. Microgravity operating condition is assumed in order to highlight the surface tension. The predictive accuracy of the model is assessed by comparing the simulated results with available correlations in the literature. Both an increased mass flux and the decreased hydraulic diameter could bring better heat transfer performance. No obvious effect of the wall heat flux is observed in condensation heat transfer coefficient. Changes in geometry and surface tension lead to a reduction of the condensate film thickness at the sides of the channel and accumulation of the condensate film at the corners of the channel. Better heat transfer performance is obtained in the curved triangle microchannels over the straight ones, and the performance could be further improved in curved triangle microchannels with larger curvatures. The minimum film thickness where most of the heat transfer process takes place exists near the corners and moves toward the corners in curved triangle microchannels with larger curvatures.

Speech responses and dual-task performance - Better time-sharing or asymmetric transfer?

NASA Technical Reports Server (NTRS)

Vidulich, Michael A.

1988-01-01

The value of speech controls in a dual-task experiment that also evaluated asymmetric transfer effects is considered. There was no evidence of asymmetric transfer in spite of significant effects supporting the advantage of mixing manual and speech responses. The data suggest that speech controls can be used to enhance performance in operational multiple-task environments.

On the Effects of Training Inductive Reasoning: How Far Does It Transfer and How Long Do the Effects Persist?

ERIC Educational Resources Information Center

Tomic, Welko; Klauer, Karl Josef

1996-01-01

Reports on two training experiments in which it was expected that training in inductive reasoning would transfer to intelligence tests measuring inductive reasoning and on mathematics performance. Shows that transfer on intelligence tests as well as on mathematics performance was linearly dependent on the amount of prior training. (DSK)

When Opting Out Is Not a Choice: Implications for NCLB's Transfer Option from Charlotte, North Carolina

ERIC Educational Resources Information Center

Mickelson, Roslyn Arlin; Southworth, Stephanie

2005-01-01

A key provision of No Child Left Behind is the opportunity for students to transfer from a low-performing school to a high-performing one. Drawing from a case study of school reform in Charlotte, North Carolina, this article examines the implementation and early outcomes of NCLB's voluntary transfer option for the Charlotte-Mecklenburg School…

Manual patient transfers used most often by student and staff nurses are consistent with their perceptions of transfer training, and performance confidence.

PubMed

van Wyk, Paula M; Weir, Patricia L; Andrews, David M

2015-01-01

A disconnect in manual patient transfer (MPT) training practices for nurses, between what is taught and used in academic and clinical settings, could have implications for injury. This study aimed to determine: 1. what MPTs student and staff nurses use in clinical settings, and 2. if the MPTs used most often were also the ones they perceived that they received training for and had the most confidence performing. Survey responses from student nurses (n=163) (mid-sized university) and staff nurses (n=33) (local hospital) regarding 19 MPTs were analyzed to determine which transfers were perceived to be used most often, and which ones they had received training for and had the greatest confidence performing. The MPTs nurses perceived using most often were the same transfers they had the greatest confidence performing and for which they perceived receiving training. However, these MPTs were not taught at the university at the time of this investigation. Reducing the disconnect between manual patient transfer training obtained in the academic and clinical environments will hopefully reduce the risk of injury for nurses and improve the quality of care for patients.

An investigation of the DC and RF performance of InP DHBTs transferred to RF CMOS wafer substrate

NASA Astrophysics Data System (ADS)

Ren, Kun; Zheng, Jiachen; Lu, Haiyan; Liu, Jun; Wu, Lishu; Zhou, Wenyong; Cheng, Wei

2018-05-01

This paper investigated the DC and RF performance of the InP double heterojunction bipolar transistors (DHBTs) transferred to RF CMOS wafer substrate. The measurement results show that the maximum values of the DC current gain of a substrate transferred device had one emitter finger, of 0.8 μm in width and 5 μm in length, are changed unobviously, while the cut-off frequency and the maximum oscillation frequency are decreased from 220 to 171 GHz and from 204 to 154 GHz, respectively. In order to have a detailed insight on the degradation of the RF performance, small-signal models for the InP DHBT before and after substrate transferred are presented and comparably extracted. The extracted results show that the degradation of the RF performance of the device transferred to RF CMOS wafer substrate are mainly caused by the additional introduced substrate parasitics and the increase of the capacitive parasitics induced by the substrate transfer process itself. Project supported by the National Natural Science Foundation of China (No. 61331006) and the Natural Science Foundation of Zhejiang Province (No. Y14F010017).

Rotor assembly and method for automatically processing liquids

DOEpatents

Burtis, Carl A.; Johnson, Wayne F.; Walker, William A.

1992-01-01

A rotor assembly for performing a relatively large number of processing steps upon a sample, such as a whole blood sample, and a diluent, such as water, includes a rotor body for rotation about an axis and including a network of chambers within which various processing steps are performed upon the sample and diluent and passageways through which the sample and diluent are transferred. A transfer mechanism is movable through the rotor body by the influence of a magnetic field generated adjacent the transfer mechanism and movable along the rotor body, and the assembly utilizes centrifugal force, a transfer of momentum and capillary action to perform any of a number of processing steps such as separation, aliquoting, transference, washing, reagent addition and mixing of the sample and diluent within the rotor body. The rotor body is particularly suitable for automatic immunoassay analyses.

Friction-reducing devices for lateral patient transfers: a clinical evaluation.

PubMed

Baptiste, Andrea; Boda, Sruthi V; Nelson, Audrey L; Lloyd, John D; Lee, William E

2006-04-01

The purpose of this study was to assess the performance of lateral transfer devices compared with the traditional draw sheet method in acute care settings through subjective feedback of caregivers actually using the devices. Every 2 weeks, the eight participating acute care units each received one of the devices, which had been randomly selected. Data were collected through caregiver surveys, which rated comfort, ease of use, perceived injury risk, time efficiency, and patient safety. An overall performance rating was calculated as the sum of these five categories. Caregivers rated air-assisted devices significantly higher (p < .05) than other devices. Lateral transfer devices are recommended over the traditional draw sheet method for performing lateral patient transfers. These friction-reducing devices are a cost-effective solution to the load of lateral patient transfers and should be favorably considered when purchasing patient-handling technologies.

To transfer or not to transfer? Kinematics and laterality quotient predict interlimb transfer of motor learning.

PubMed

Lefumat, Hannah Z; Vercher, Jean-Louis; Miall, R Chris; Cole, Jonathan; Buloup, Frank; Bringoux, Lionel; Bourdin, Christophe; Sarlegna, Fabrice R

2015-11-01

Humans can remarkably adapt their motor behavior to novel environmental conditions, yet it remains unclear which factors enable us to transfer what we have learned with one limb to the other. Here we tested the hypothesis that interlimb transfer of sensorimotor adaptation is determined by environmental conditions but also by individual characteristics. We specifically examined the adaptation of unconstrained reaching movements to a novel Coriolis, velocity-dependent force field. Right-handed subjects sat at the center of a rotating platform and performed forward reaching movements with the upper limb toward flashed visual targets in prerotation, per-rotation (i.e., adaptation), and postrotation tests. Here only the dominant arm was used during adaptation and interlimb transfer was assessed by comparing performance of the nondominant arm before and after dominant-arm adaptation. Vision and no-vision conditions did not significantly influence interlimb transfer of trajectory adaptation, which on average was significant but limited. We uncovered a substantial heterogeneity of interlimb transfer across subjects and found that interlimb transfer can be qualitatively and quantitatively predicted for each healthy young individual. A classifier showed that in our study, interlimb transfer could be predicted based on the subject's task performance, most notably motor variability during learning, and his or her laterality quotient. Positive correlations suggested that variability of motor performance and lateralization of arm movement control facilitate interlimb transfer. We further show that these individual characteristics can predict the presence and the magnitude of interlimb transfer of left-handers. Overall, this study suggests that individual characteristics shape the way the nervous system can generalize motor learning. Copyright © 2015 the American Physiological Society.

Grid orthogonality effects on predicted turbine midspan heat transfer and performance

NASA Technical Reports Server (NTRS)

Boyle, R. J.; Ameri, A. A.

1995-01-01

The effect of five different C type grid geometries on the predicted heat transfer and aerodynamic performance of a turbine stator is examined. Predictions were obtained using two flow analysis codes. One was a finite difference analysis, and the other was a finite volume analysis. Differences among the grids in terms of heat transfer and overall performance were small. The most significant difference among the five grids occurred in the prediction of pitchwise variation in total pressure. There was consistency between results obtained with each of the flow analysis codes when the same grid was used. A grid generating procedure in which the viscous grid is embedded within an inviscid type grid resulted in the best overall performance.

On improving the performance of nonphotochemical quenching in CP29 light-harvesting antenna complex

DOE PAGES

Berman, Gennady Petrovich; Nesterov, Alexander I.; Sayre, Richard Thomas; ...

2016-02-02

In this study, we model and simulate the performance of charge-transfer in nonphotochemical quenching (NPQ) in the CP29 light-harvesting antenna-complex associated with photosystem II (PSII). The model consists of five discrete excitonic energy states and two sinks, responsible for the potentially damaging processes and charge-transfer channels, respectively. We demonstrate that by varying (i) the parameters of the chlorophyll-based dimer, (ii) the resonant properties of the protein-solvent environment interaction, and (iii) the energy transfer rates to the sinks, one can significantly improve the performance of the NPQ. In conclusion, our analysis suggests strategies for improving the performance of the NPQ inmore » response to environmental changes, and may stimulate experimental verification.« less

Age differences in spatial working memory contributions to visuomotor adaptation and transfer.

PubMed

Langan, Jeanne; Seidler, Rachael D

2011-11-20

Throughout our life span we encounter challenges that require us to adapt to the demands of our changing environment; this entails learning new skills. Two primary components of motor skill learning are motor acquisition, the initial process of learning the skill, and motor transfer, when learning a new skill is benefitted by the overlap with a previously learned one. Older adults typically exhibit declines in motor acquisition compared to young adults, but remarkably, do not demonstrate deficits in motor transfer [10]. Our recent work demonstrates that a failure to engage spatial working memory (SWM) is associated with skill learning deficits in older adults [16]. Here, we investigate the role that SWM plays in both motor learning and transfer in young and older adults. Both age groups exhibited performance savings, or positive transfer, at transfer of learning for some performance variables. Measures of spatial working memory performance and reaction time correlated with both motor learning and transfer for young adults. Young adults recruited overlapping brain regions in prefrontal, premotor, parietal and occipital cortex for performance of a SWM and a visuomotor adaptation task, most notably during motor learning, replicating our prior findings [12]. Neural overlap between the SWM task and visuomotor adaptation for the older adults was limited to parietal cortex, with minimal changes from motor learning to transfer. Combined, these results suggest that age differences in engagement of cognitive strategies have a differential impact on motor learning and transfer. Copyright © 2011 Elsevier B.V. All rights reserved.

Age differences in spatial working memory contributions to visuomotor adaptation and transfer

PubMed Central

Langan, Jeanne; Seidler, Rachael. D.

2011-01-01

Throughout our life span we encounter challenges that require us to adapt to the demands of our changing environment; this entails learning new skills. Two primary components of motor skill learning are motor acquisition, the initial process of learning the skill, and motor transfer, when learning a new skill is benefitted by the overlap with a previously learned one. Older adults typically exhibit declines in motor acquisition compared to young adults, but remarkably, do not demonstrate deficits in motor transfer (Seidler, 2007). Our recent work demonstrates that a failure to engage spatial working memory (SWM) is associated with skill learning deficits in older adults (Anguera et al., 2011). Here, we investigate the role that SWM plays in both motor learning and transfer in young and older adults. Both age groups exhibited performance savings, or positive transfer, at transfer of learning for some performance variables. Measures of spatial working memory performance and reaction time correlated with both motor learning and transfer for young adults. Young adults recruited overlapping brain regions in prefrontal, premotor, parietal and occipital cortex for performance of a SWM and a visuomotor adaptation task, most notably during motor learning, replicating our prior findings (Anguera et al., 2010). Neural overlap between the SWM task and visuomotor adaptation for the older adults was limited to parietal cortex, with minimal changes from motor learning to transfer. Combined, these results suggest that age differences in engagement of cognitive strategies have a differential impact on motor learning and transfer. PMID:21784106

Procedural instructions, principles, and examples: how to structure instructions for procedural tasks to enhance performance, learning, and transfer.

PubMed

Eiriksdottir, Elsa; Catrambone, Richard

2011-12-01

The goal of this article is to investigate how instructions can be constructed to enhance performance and learning of procedural tasks. Important determinants of the effectiveness of instructions are type of instructions (procedural information, principles, and examples) and pedagogical goal (initial performance, learning, and transfer). Procedural instructions describe how to complete tasks in a stepwise manner, principles describe rules governing the tasks, and examples demonstrate how instances of the task are carried out. The authors review the research literature associated with each type of instruction to identify factors determining effectiveness for different pedagogical goals. The results suggest a trade-off between usability and learnability. Specific instructions help initial performance, whereas more general instructions, requiring problem solving, help learning and transfer. Learning from instructions takes cognitive effort, and research suggests that learners typically opt for low effort. However, it is possible to meet both goals of good initial performance and learning with methods such as fading and by combining different types of instructions. How instructions are constructed influences their effectiveness for the goals of good initial performance, learning, and transfer, and it is therefore important for researchers and practitioners alike to define the pedagogical goal of instructions. If the goal is good initial performance, then instructions should highly resemble the task at hand (e.g., in the form of detailed procedural instructions and examples), but if the goal is good learning and transfer, then instructions should be more abstract, inducing learners to expend the necessary cognitive effort for learning.

Academic profile of students who transferred to Zagreb School of Medicine from other medical schools in Croatia.

PubMed

Dusek, Davorka; Dolovcak, Svjetlana; Kljaković-Gaspić, Marko

2004-02-01

To assess the academic performance of students who transferred to the Zagreb School of Medicine from other three medical schools in Croatia. Academic performance of medical students who moved from Rijeka, Osijek, or Split University Medical Schools to the Zagreb University School of Medicine at the second or third year was compared with academic performance of students enrolled at the Zagreb University School of Medicine. Using the Zagreb Medical School's registry, we made a list of 57 transfer students to Zagreb Medical School in the 1985-1994 period. Control group was formed of students enrolled at the Zagreb School of Medicine in the same period, whose names followed in alphabetical order after the names of transfer students. Students' performance was analyzed according to their grade average before transfer, grade average in the first year after transfer, total grade average after transfer, overall grade average, and duration of studies. We also analyzed the proportion of students in each group who did not pass the admission test at the Zagreb School of Medicine in the year before the enrollment in Zagreb, Osijek, Rijeka, and Split Medical Schools. Nineteen transfer students, transferred between 1985 and 1988, and their controls were excluded from the analysis because of incomplete data. Transfer students had significantly lower grade average before transfer (3.2-/+0.6 vs 3.5-/+0.7, p=0.03, Student t-test), lower grade average in the first year after transfer (3.2-/+0.6 vs 3.5-/+0.7, p=0.03), lower total grade average after transfer (3.6-/+0.5 vs 4.0-/+0.6, p<0.001), and lower overall grade average (3.5-/+0.5 vs 3.9-/+0.6, p<0.001) than control students. Median time to graduate for transfer students was 7 years (range, 5-9) and 6 years (range, 5-9) for control students (p=0.375, Mann-Whitney test). There were significantly more students among transfer students who did not pass the admission test at the Zagreb School of Medicine in the year before the final enrollment than their controls (15/38 vs 4/38, p=0.009, chi-square test). Transfer students had poorer academic performance than students who passed the admission test and were enrolled at the Zagreb School of Medicine from the first year of studies.

Orbit Transfer Vehicle (OTV) engine, phase A study. Volume 2: Study

NASA Technical Reports Server (NTRS)

Mellish, J. A.

1979-01-01

The hydrogen oxygen engine used in the orbiter transfer vehicle is described. The engine design is analyzed and minimum engine performance and man rating requirements are discussed. Reliability and safety analysis test results are presented and payload, risk and cost, and engine installation parameters are defined. Engine tests were performed including performance analysis, structural analysis, thermal analysis, turbomachinery analysis, controls analysis, and cycle analysis.

Performance Analysis of GFDL's GCM Line-By-Line Radiative Transfer Model on GPU and MIC Architectures

NASA Astrophysics Data System (ADS)

Menzel, R.; Paynter, D.; Jones, A. L.

2017-12-01

Due to their relatively low computational cost, radiative transfer models in global climate models (GCMs) run on traditional CPU architectures generally consist of shortwave and longwave parameterizations over a small number of wavelength bands. With the rise of newer GPU and MIC architectures, however, the performance of high resolution line-by-line radiative transfer models may soon approach those of the physical parameterizations currently employed in GCMs. Here we present an analysis of the current performance of a new line-by-line radiative transfer model currently under development at GFDL. Although originally designed to specifically exploit GPU architectures through the use of CUDA, the radiative transfer model has recently been extended to include OpenMP in an effort to also effectively target MIC architectures such as Intel's Xeon Phi. Using input data provided by the upcoming Radiative Forcing Model Intercomparison Project (RFMIP, as part of CMIP 6), we compare model results and performance data for various model configurations and spectral resolutions run on both GPU and Intel Knights Landing architectures to analogous runs of the standard Oxford Reference Forward Model on traditional CPUs.

Effect of Practicing Soccer Juggling With Different Sized Balls Upon Performance, Retention, and Transfer to Ball Reception.

PubMed

Raastad, Olav; Aune, Tore Kristian; van den Tillaar, Roland

2016-10-01

The aim of this study was to investigate if making the skill acquisition phase more difficult or easier would enhance performance in soccer juggling, and if this practice has a positive intertask transfer effect to ball reception performance. Twenty-two adolescent soccer players were tested in juggling a soccer ball and in the control of an approaching ball at a pre, post and retention test. The participants were randomly divided in a small ball size and bigger ball size training group that both trained four times per week for 6 weeks. At the post and retention test both groups enhanced performance in soccer juggling test with no difference between groups and no increase in ball reception performance at these tests. It was concluded that about intra task transfer and retention of soccer juggling skills, it does not matter if you increase (small balls) or decrease the difficulty (larger balls) when using the same amount of practice time within the skill acquisition phase in soccer juggling. In addition that for ball juggling and ball reception (inter task) these two tasks differ too much in afferent information and movement characteristics that no positive transfer between these two skills no positive intertask transfer can be expected.

Are two hands (from different people) better than one? Mode effects and differential transfer between manual coordination modes.

PubMed

Gorman, Jamie C; Crites, Michael J

2013-08-01

We report an experiment in which we investigated differential transfer between unimanual (one-handed), bimanual (two-handed), and intermanual (different peoples' hands) coordination modes. People perform some manual tasks faster than others ("mode effects"). However, little is known about transfer between coordination modes. To investigate differential transfer, we draw hypotheses from two perspectives--information based and constraint based--of bimanual and interpersonal coordination and skill acquisition. Participants drove a teleoperated rover around a circular path in sets of two 2-min trials using two of the different coordination modes. Speed and variability of the rover's path were measured. Order of coordination modes was manipulated to examine differential transfer and mode effects. Differential transfer analyses revealed patterns of positive transfer from simpler (localized spatiotemporal constraints) to more complex (distributed spatiotemporal constraints) coordination modes paired with negative transfer in the opposite direction. Mode effects indicated that intermanual performance was significantly faster than unimanual performance, and bimanual performance was intermediate. Importantly, all of these effects disappeared with practice. The observed patterns of differential transfer between coordination modes may be better accounted for by a constraint-based explanation of differential transfer than by an information-based one. Mode effects may be attributable to anticipatory movements based on dyads' access to mutual visual information. Although people may be faster using more-complex coordination modes, when operators transition between modes, they may be more effective transitioning from simpler (e.g., bimanual) to more complex (e.g., intermanual) modes than vice versa. However, this difference may be critical only for novel or rarely practiced tasks.

A High Performance Micro Channel Interface for Real-Time Industrial Image Processing

Treesearch

Thomas H. Drayer; Joseph G. Tront; Richard W. Conners

1995-01-01

Data collection and transfer devices are critical to the performance of any machine vision system. The interface described in this paper collects image data from a color line scan camera and transfers the data obtained into the system memory of a Micro Channel-based host computer. A maximum data transfer rate of 20 Mbytes/sec can be achieved using the DMA capabilities...

Three Orbital Burns to Molniya Orbit Via Shuttle_Centaur G Upper Stage

NASA Technical Reports Server (NTRS)

Williams, Craig H.

2015-01-01

An unclassified analytical trajectory design, performance, and mission study was done for the 1982 to 1986 joint National Aeronautics and Space Administration (NASA)-United States Air Force (USAF) Shuttle/Centaur G upper stage development program to send performance-demanding payloads to high orbits such as Molniya using an unconventional orbit transfer. This optimized three orbital burn transfer to Molniya orbit was compared to the then-baselined two burn transfer. The results of the three dimensional trajectory optimization performed include powered phase steering data and coast phase orbital element data. Time derivatives of the orbital elements as functions of thrust components were evaluated and used to explain the optimization's solution. Vehicle performance as a function of parking orbit inclination was given. Performance and orbital element data was provided for launch windows as functions of launch time. Ground track data was given for all burns and coasts including variation within the launch window. It was found that a Centaur with fully loaded propellant tanks could be flown from a 37 deg inclination low Earth parking orbit and achieve Molniya orbit with comparable performance to the baselined transfer which started from a 57 deg inclined orbit: 9,545 versus 9,552 lb of separated spacecraft weight, respectively. There was a significant reduction in the need for propellant launch time reserve for a 1 hr window: only 78 lb for the three burn transfer versus 320 lb for the two burn transfer. Conversely, this also meant that longer launch windows over more orbital revolutions could be done for the same amount of propellant reserve. There was no practical difference in ground tracking station or airborne assets needed to secure telemetric data, even though the geometric locations of the burns varied considerably. There was a significant adverse increase in total mission elapsed time for the three versus two burn transfer (12 vs. 1-1/4 hr), but could be accommodated by modest modifications to Centaur systems. Future applications were discussed. The three burn transfer was found to be a viable, arguably preferable, alternative to the two burn transfer.

Three Orbital Burns to Molniya Orbit via Shuttle Centaur G Upper Stage

NASA Technical Reports Server (NTRS)

Williams, Craig H.

2014-01-01

An unclassified analytical trajectory design, performance, and mission study was done for the 1982-86 joint NASA-USAF Shuttle/Centaur G upper stage development program to send performance-demanding payloads to high orbits such as Molniya using an unconventional orbit transfer. This optimized three orbital burn transfer to Molniya orbit was compared to the then-baselined two burn transfer. The results of the three dimensional trajectory optimization performed include powered phase steering data and coast phase orbital element data. Time derivatives of the orbital elements as functions of thrust components were evaluated and used to explain the optimization's solution. Vehicle performance as a function of parking orbit inclination was given. Performance and orbital element data was provided for launch windows as functions of launch time. Ground track data was given for all burns and coasts including variation within the launch window. It was found that a Centaur with fully loaded propellant tanks could be flown from a 37deg inclination low Earth parking orbit and achieve Molniya orbit with comparable performance to the baselined transfer which started from a 57deg inclined orbit: 9,545 lb vs. 9,552 lb of separated spacecraft weight respectively. There was a significant reduction in the need for propellant launch time reserve for a one hour window: only 78 lb for the three burn transfer vs. 320 lb for the two burn transfer. Conversely, this also meant that longer launch windows over more orbital revolutions could be done for the same amount of propellant reserve. There was no practical difference in ground tracking station or airborne assets needed to secure telemetric data, even though the geometric locations of the burns varied considerably. There was a significant adverse increase in total mission elapsed time for the three vs. two burn transfer (12 vs. 11/4 hrs), but could be accommodated by modest modifications to Centaur systems. Future applications were discussed. The three burn transfer was found to be a viable, arguably preferable, alternative to the two burn transfer.

Heat transfer performance of a pulsating heat pipe charged with acetone-based mixtures

NASA Astrophysics Data System (ADS)

Wang, Wenqing; Cui, Xiaoyu; Zhu, Yue

2017-06-01

Pulsating heat pipes (PHPs) are used as high efficiency heat exchangers, and the selection of working fluids in PHPs has a great impact on the heat transfer performance. This study investigates the thermal resistance characteristics of the PHP charged with acetone-based binary mixtures, where deionized water, methanol and ethanol were added to and mixed with acetone, respectively. The volume mixing ratios were 2:1, 4:1 and 7:1, and the heating power ranged from 10 to 100 W with filling ratios of 45, 55, 62 and 70%. At a low filling ratio (45%), the zeotropic characteristics of the binary mixtures have an influence on the heat transfer performance of the PHP. Adding water, which has a substantially different boiling point compared with that of acetone, can significantly improve the anti-dry-out ability inside the PHP. At a medium filling ratio (55%), the heat transfer performance of the PHP is affected by both phase transition characteristics and physical properties of working fluids. At high heating power, the thermal resistance of the PHP with acetone-water mixture is between that with pure acetone and pure water, whereas the thermal resistance of the PHP with acetone-methanol and acetone-ethanol mixtures at mixing ratios of 2:1 and 4:1 is less than that with the corresponding pure fluids. At high filling ratios (62 and 70%), the heat transfer performance of the PHP is mainly determined by the properties of working fluids that affects the flow resistance. Thus, the PHP with acetone-methanol and acetone-ethanol mixtures that have a lower flow resistance shows better heat transfer performance than that with acetone-water mixture.

The Scaling of Performance and Losses in Miniature Internal Combustion Engines

DTIC Science & Technology

2010-01-01

reliable measurements of engine performance and losses in these small engines. Methodologies are also developed for measuring volumetric, heat transfer...making reliable measurements of engine performance and losses in these small engines. Methodologies are also developed for measuring volumetric, heat ...the most important challenge as it accounts for 60-70% of total energy losses. Combustion losses are followed in order of importance by heat transfer

Solar Electric Propulsion Vehicle Design Study for Cargo Transfer to Earth-moon L1

NASA Technical Reports Server (NTRS)

Sarver-Verhey, Timothy R.; Kerslake, Thomas W.; Rawlin, Vincent K.; Falck, Robert D.; Dudzinski, Leonard J.; Oleson, Steven R.

2002-01-01

A design study for a cargo transfer vehicle using solar electric propulsion was performed for NASA's Revolutionary Aerospace Systems Concepts program. Targeted for 2016, the solar electric propulsion (SEP) transfer vehicle is required to deliver a propellant supply module with a mass of approximately 36 metric tons from Low Earth Orbit to the first Earth-Moon libration point (LL1) within 270 days. Following an examination of propulsion and power technology options, a SEP transfer vehicle design was selected that incorporated large-area (approx. 2700 sq m) thin film solar arrays and a clustered engine configuration of eight 50 kW gridded ion thrusters mounted on an articulated boom. Refinement of the SEP vehicle design was performed iteratively to properly estimate the required xenon propellant load for the out-bound orbit transfer. The SEP vehicle performance, including the xenon propellant estimation, was verified via the SNAP trajectory code. Further efforts are underway to extend this system model to other orbit transfer missions.

Numerical evaluation of laminar heat transfer enhancement in nanofluid flow in coiled square tubes

PubMed Central

2011-01-01

Convective heat transfer can be enhanced by changing flow geometry and/or by enhancing thermal conductivity of the fluid. This study proposes simultaneous passive heat transfer enhancement by combining the geometry effect utilizing nanofluids inflow in coils. The two nanofluid suspensions examined in this study are: water-Al2O3 and water-CuO. The flow behavior and heat transfer performance of these nanofluid suspensions in various configurations of coiled square tubes, e.g., conical spiral, in-plane spiral, and helical spiral, are investigated and compared with those for water flowing in a straight tube. Laminar flow of a Newtonian nanofluid in coils made of square cross section tubes is simulated using computational fluid dynamics (CFD)approach, where the nanofluid properties are treated as functions of particle volumetric concentration and temperature. The results indicate that addition of small amounts of nanoparticles up to 1% improves significantly the heat transfer performance; however, further addition tends to deteriorate heat transfer performance. PMID:21711901

Cerebellar activation during motor sequence learning is associated with subsequent transfer to new sequences.

PubMed

Shimizu, Renee E; Wu, Allan D; Knowlton, Barbara J

2016-12-01

Effective learning results not only in improved performance on a practiced task, but also in the ability to transfer the acquired knowledge to novel, similar tasks. Using a modified serial reaction time (RT) task, the authors examined the ability to transfer to novel sequences after practicing sequences in a repetitive order versus a nonrepeating interleaved order. Interleaved practice resulted in better performance on new sequences than repetitive practice. In a second study, participants practiced interleaved sequences in a functional MRI (fMRI) scanner and received a transfer test of novel sequences. Transfer ability was positively correlated with cerebellar blood oxygen level dependent activity during practice, indicating that greater cerebellar engagement during training resulted in better subsequent transfer performance. Interleaved practice may thus result in a more generalized representation that is robust to interference, and the degree of activation in the cerebellum may be a reflection of the instantiation and engagement of internal models. (PsycINFO Database Record (c) 2016 APA, all rights reserved).

Rotor assembly and method for automatically processing liquids

DOEpatents

Burtis, C.A.; Johnson, W.F.; Walker, W.A.

1992-12-22

A rotor assembly is described for performing a relatively large number of processing steps upon a sample, such as a whole blood sample, and a diluent, such as water. It includes a rotor body for rotation about an axis and includes a network of chambers within which various processing steps are performed upon the sample and diluent and passageways through which the sample and diluent are transferred. A transfer mechanism is movable through the rotor body by the influence of a magnetic field generated adjacent the transfer mechanism and movable along the rotor body, and the assembly utilizes centrifugal force, a transfer of momentum and capillary action to perform any of a number of processing steps such as separation, aliquoting, transference, washing, reagent addition and mixing of the sample and diluent within the rotor body. The rotor body is particularly suitable for automatic immunoassay analyses. 34 figs.

Investigation of thermo-fluid behavior of mixed convection heat transfer of different dimples-protrusions wall patterns to heat transfer enhancement

NASA Astrophysics Data System (ADS)

Sobhani, M.; Behzadmehr, A.

2018-05-01

This study is a numerical investigation of the effect of improving heat transfer namely, modified rough (dimples and protrusions) surfaces on the mixed convective heat transfer of a turbulent flow in a horizontal tube. The effects of different dimples-protrusions arrangements on the improving the thermal performance of a rough tube are investigated at various Richardson numbers. Three dimensional governing equations are discretized by the finite-volume technique. Based on the obtained results the dimples-protrusions arrangements are modified to find a suitable configuration for which heat transfer coefficient and pressure drop to be balanced. Modified dimples-protrusions arrangements that shows higher performance is presented. Its average thermal performance 18% and 11% is higher than the other arrangements. In addition, the results show that roughening a smooth tube is more effective at the higher Richardson number.

Transfer Learning for Activity Recognition: A Survey

PubMed Central

Cook, Diane; Feuz, Kyle D.; Krishnan, Narayanan C.

2013-01-01

Many intelligent systems that focus on the needs of a human require information about the activities being performed by the human. At the core of this capability is activity recognition, which is a challenging and well-researched problem. Activity recognition algorithms require substantial amounts of labeled training data yet need to perform well under very diverse circumstances. As a result, researchers have been designing methods to identify and utilize subtle connections between activity recognition datasets, or to perform transfer-based activity recognition. In this paper we survey the literature to highlight recent advances in transfer learning for activity recognition. We characterize existing approaches to transfer-based activity recognition by sensor modality, by differences between source and target environments, by data availability, and by type of information that is transferred. Finally, we present some grand challenges for the community to consider as this field is further developed. PMID:24039326

Forest Resource Information System. Phase 3: System transfer report

NASA Technical Reports Server (NTRS)

Mroczynski, R. P. (Principal Investigator)

1981-01-01

Transfer of the forest reserve information system (FRIS) from the Laboratory for Applications of Remote Sensing to St. Regis Paper Company is described. Modifications required for the transfer of the LARYS image processing software are discussed. The reformatting, geometric correction, image registration, and documentation performed for preprocessing transfer are described. Data turnaround was improved and geometrically corrected and ground-registered CCT LANDSAT 3 data provided to the user. The technology transfer activities are summarized. An application test performed in order to assess a Florida land acquisition is described. A benefit/cost analysis of FRIS is presented.

The mediating effect of context variation in mixed practice for transfer of basic science.

PubMed

Kulasegaram, Kulamakan; Min, Cynthia; Howey, Elizabeth; Neville, Alan; Woods, Nicole; Dore, Kelly; Norman, Geoffrey

2015-10-01

Applying a previously learned concept to a novel problem is an important but difficult process called transfer. Practicing multiple concepts together (mixed practice mode) has been shown superior to practicing concepts separately (blocked practice mode) for transfer. This study examined the effect of single and multiple practice contexts for both mixed and blocked practice modalities on transfer performance. We looked at performance on near transfer (familiar contexts) cases and far transfer (unfamiliar contexts) cases. First year psychology students (n = 42) learned three physiological concepts in a 2 × 2 factorial study (one or two practice contexts and blocked or mixed practice). Each concept was practiced with two clinical cases; practice context was defined as the number of organ systems used (one system per concept vs. two systems). In blocked practice, two practice cases followed each concept; in mixed practice, students learned all concepts before seeing six practice cases. Transfer testing consisted of correctly classifying and explaining 15 clinical cases involving near and far transfer. The outcome was ratings of quality of explanations on a 0-3 scale. The repeated measures analysis showed a significant near versus far by organ system interaction [F(1,38) = 3.4, p < 0.002] with practice with a single context showing lower far transfer scores than near transfer [0.58 (0.37)-0.83 (0.37)] compared to the two contexts which had similar far and near transfer scores [1.19 (0.50)-1.01 (0.38)]. Practicing with two organ contexts had a significant benefit for far transfer regardless of mixed or blocked practice; the single context mixed practice group had the lowest far transfer performance; this was a large effect size (Cohen's d = 0.81). Using only one practice context during practice significantly lowers performance even with the usually superior mixed practice mode. Novices should be exposed to multiple contexts and mixed practice to facilitate transfer.

Miniature gas turbines: Numerical study of the effects of heat transfer and Reynolds number on the performance of an axial compressor

NASA Astrophysics Data System (ADS)

Xiang, Junting; Schlüter, Jörg Uwe; Duan, Fei

2014-04-01

In the present work, we focus on computational investigations of the Reynolds number effect and the wall heat transfer on the performance of axial compressor during its miniaturization. The NASA stage 35 compressor is selected as the configuration in this study and computational fluid dynamics (CFD) is used to carry out the miniaturization process and simulations. We perform parameter studies on the effect of Reynolds number and wall thermal conditions. Our results indicate a decrease of efficiency, if the compressor is miniaturized based on its original geometry due to the increase of viscous effects. The increased heat transfer through wall has only a small effect and will actually benefit compressor performance based on our study.

Improving Safe Consumer Transfers in a Day Treatment Setting Using Training and Feedback

PubMed Central

Austin, John; Rost, Kristen; Stanley, Leslie

2011-01-01

An intervention package that included employee training, supervisory feedback, and graphic feedback was developed to increase employees' safe patient-transfers at a day treatment center for adults with disabilities. The intervention was developed based on the center's results from a Performance Diagnostic Checklist (PDC), which focused on antecedents, equipment and processes, knowledge and skills, and consequences related to patient-transfers. A multiple baseline (MBL) across two lifts (pivot and trunk), with one lift (side) remaining in baseline was used to evaluate the effects of the treatment package on three lifts commonly used by three health-care workers. The results indicated a substantial increase in the overall safe performance of the three lifts. The mean increase for group safety performance following intervention was 34% and 29% over baseline measures for the two target transfers, and 28% over baseline measures for the nontargeted transfer. The implications of these findings suggest that in settings where patient transfers are frequent and injuries are likely to occur (e.g., hospitals, day treatment centers), safe lifting and transferring behaviors can improve with an efficient and cost-effective intervention. PMID:22649577

Heat transfer and pressure drop characteristics of a plate heat exchanger using water based Al2O3 nanofluid for 30° and 60° chevron angles

NASA Astrophysics Data System (ADS)

Elias, M. M.; Saidur, R.; Ben-Mansour, R.; Hepbasli, A.; Rahim, N. A.; Jesbains, K.

2018-04-01

Nanofluid is a new class of engineering fluid that has good heat transfer characteristics which is essential to increase the heat transfer performance in various engineering applications such as heat exchangers and cooling of electronics. In this study, experiments were conducted to compare the heat transfer performance and pressure drop characteristics in a plate heat exchanger (PHE) for 30° and 60° chevron angles using water based Al2O3 nanofluid at the concentrations from 0 to 0.5 vol.% for different Reynolds numbers. The thermo-physical properties has been determined and presented in this paper. At 0.5 vol% concentration, the maximum heat transfer coefficient, the overall heat transfer coefficient and the heat transfer rate for 60° chevron angle have attained a higher percentage of 15.14%, 7.8% and 15.4%, respectively in comparison with the base fluid. Consequently, when the volume concentration or Reynolds number increases, the heat transfer coefficient and the overall heat transfer coefficient as well as the heat transfer rate of the PHE (Plate Heat Exchangers) increases respectively. Similarly, the pressure drop increases with the volume concentration. 60° chevron angle showed better performance in comparison with 30° chevron angle.

Performing a reaching task with one arm while adapting to a visuomotor rotation with the other can lead to complete transfer of motor learning across the arms

PubMed Central

Lei, Yuming; Binder, Jeffrey R.

2015-01-01

The extent to which motor learning is generalized across the limbs is typically very limited. Here, we investigated how two motor learning hypotheses could be used to enhance the extent of interlimb transfer. According to one hypothesis, we predicted that reinforcement of successful actions by providing binary error feedback regarding task success or failure, in addition to terminal error feedback, during initial training would increase the extent of interlimb transfer following visuomotor adaptation (experiment 1). According to the other hypothesis, we predicted that performing a reaching task repeatedly with one arm without providing performance feedback (which prevented learning the task with this arm), while concurrently adapting to a visuomotor rotation with the other arm, would increase the extent of transfer (experiment 2). Results indicate that providing binary error feedback, compared with continuous visual feedback that provided movement direction and amplitude information, had no influence on the extent of transfer. In contrast, repeatedly performing (but not learning) a specific task with one arm while visuomotor adaptation occurred with the other arm led to nearly complete transfer. This suggests that the absence of motor instances associated with specific effectors and task conditions is the major reason for limited interlimb transfer and that reinforcement of successful actions during initial training is not beneficial for interlimb transfer. These findings indicate crucial contributions of effector- and task-specific motor instances, which are thought to underlie (a type of) model-free learning, to optimal motor learning and interlimb transfer. PMID:25632082

The direction of bilateral transfer depends on the performance parameter.

PubMed

Pan, Zhujun; van Gemmert, Arend W A

2013-10-01

To acquire a more comprehensive understanding of the learning benefits associated with bilateral transfer and to gain knowledge of possible mechanisms behind bilateral transfer, we investigated the transfer direction of several parameters which are assumed to represent important features of movement control in a visuo-motor task. During the study, participants learned a multidirectional point-to-point drawing task in which the visual feedback was rotated 45° and the gain was increased. Performance changes of the untrained hand in movement time, trajectory length, normalized jerk, initial direction error, ratio of the primary sub-movement time to the total movement time, and the accuracy of the aiming movement after the primary sub-movement were investigated as indices of learning from bilateral transfer. The results showed that performance parameters related to the initial production of the movement, such as the initial direction, ratio of primary sub-movement to the total movement time, and movement accuracy after the primary sub-movement, only transferred to the non-dominant, while hand performance variables related to the overall outcome, such as movement duration, movement smoothness, and trajectory length, transferred in both directions. The findings of the current study support the basic principle of the "dynamic dominance model" because it is suggested that overall improvements in the non-dominant system are controlled by trajectory parameters in visuo-motor tasks, which resulted in transference of the afore mentioned production parameters to rather occur to the non-dominant hand as opposed to transference to the dominant hand. Published by Elsevier B.V.

Working memory training and transfer in older adults: effects of age, baseline performance, and training gains.

PubMed

Zinke, Katharina; Zeintl, Melanie; Rose, Nathan S; Putzmann, Julia; Pydde, Andrea; Kliegel, Matthias

2014-01-01

Recent studies suggest that working memory training may benefit older adults; however, findings regarding training and transfer effects are mixed. The current study aimed to investigate the effects of a process-based training intervention in a diverse sample of older adults and explored possible moderators of training and transfer effects. For that purpose, 80 older adults (65-95 years) were assigned either to a training group that worked on visuospatial, verbal, and executive working memory tasks for 9 sessions over 3 weeks or to a control group. Performance on trained and transfer tasks was assessed in all participants before and after the training period, as well as at a 9-month follow-up. Analyses revealed significant training effects in all 3 training tasks in trained participants relative to controls, as well as near transfer to a verbal working memory task and far transfer to a fluid intelligence task. Encouragingly, all training effects and the transfer effect to verbal working memory were stable at the 9-month follow-up session. Further analyses revealed that training gains were predicted by baseline performance in training tasks and (to a lesser degree) by age. Gains in transfer tasks were predicted by age and by the amount of improvement in the trained tasks. These findings suggest that cognitive plasticity is preserved over a large range of old age and that even a rather short training regime can lead to (partly specific) training and transfer effects. However, baseline performance, age, and training gains moderate the amount of plasticity. PsycINFO Database Record (c) 2014 APA, all rights reserved.

Patient-reported outcome measures versus inertial performance-based outcome measures: A prospective study in patients undergoing primary total knee arthroplasty.

PubMed

Bolink, S A A N; Grimm, B; Heyligers, I C

2015-12-01

Outcome assessment of total knee arthroplasty (TKA) by subjective patient reported outcome measures (PROMs) may not fully capture the functional (dis-)abilities of relevance. Objective performance-based outcome measures could provide distinct information. An ambulant inertial measurement unit (IMU) allows kinematic assessment of physical performance and could potentially be used for routine follow-up. To investigate the responsiveness of IMU measures in patients following TKA and compare outcomes with conventional PROMs. Patients with end stage knee OA (n=20, m/f=7/13; age=67.4 standard deviation 7.7 years) were measured preoperatively and one year postoperatively. IMU measures were derived during gait, sit-stand transfers and block step-up transfers. PROMs were assessed by using the Western Ontario and McMaster Universities Osteoarthritis Index (WOMAC) and Knee Society Score (KSS). Responsiveness was calculated by the effect size, correlations were calculated with Spearman's rho correlation coefficient. One year after TKA, patients performed significantly better at gait, sit-to-stand transfers and block step-up transfers. Measures of time and kinematic IMU measures demonstrated significant improvements postoperatively for each performance-based test. The largest improvement was found in block step-up transfers (effect size=0.56-1.20). WOMAC function score and KSS function score demonstrated moderate correlations (Spearman's rho=0.45-0.74) with some of the physical performance-based measures pre- and postoperatively. To characterize the changes in physical function after TKA, PROMs could be supplemented by performance-based measures, assessing function during different activities and allowing kinematic characterization with an ambulant IMU. Copyright © 2015 Elsevier B.V. All rights reserved.

New Trends in Two-Way Time and Frequency Transfer via Satellite

DTIC Science & Technology

1999-12-01

Recent developments performed with SATRE two-way time transfer ( TWSTFT ) modems resulted in significant performance upgrades and operational...improvements of the TWSTFT method These are aimed to reduce : manpower effort and to provide reliable, real-time data via a centralized monitoring and...collection have been used throughout the experiment INTRODUCTION Two-Way Time and Frequency Transfer via Satellite ( TWSTFT ) is a well established method to

Heat transfer performance characteristics of hybrid nanofluids as coolant in louvered fin automotive radiator

NASA Astrophysics Data System (ADS)

Sahoo, Rashmi R.; Sarkar, Jahar

2017-06-01

Present study deals with the enhancement of convective heat transfer performance of EG brine based various hybrid nanofluids i.e. Ag, Cu, SiC, CuO and TiO2 in 0-1% volume fraction of Al2O3 nanofluid, as coolants for louvered fin automobile radiator. The effects of nanoparticles combination and operating parameters on thermo physical properties, heat transfer, effectiveness, pumping power and performance index of hybrid nanofluids have been evaluated. Comparison of studied hybrid nanofluids based on radiator size and pumping power has been made as well. Among all studied hybrid nanofluids, 1% Ag hybrid nanofluid (0.5% Ag and 0.5% Al2O3) yields highest effectiveness and heat transfer rate as well as pumping power. However, SiC + Al2O3 dispersed hybrid nanofluid yields maximum performance index and hence this can be recommended for best coolant. For the same radiator size and heat transfer rate, pumping power increases by using Ag hybrid nanofluids leading to increase in engine thermal efficiency and hence reduction in engine fuel consumption. For same coolant flow rate and heat transfer rate, the radiator size reduces and pumping power increases by using Ag hybrid nanofluids leading to reduction in radiator size, weight and cost.

Intermanual transfer and bilateral cortical plasticity is maintained in older adults after skilled motor training with simple and complex tasks

PubMed Central

Dickins, Daina S. E.; Sale, Martin V.; Kamke, Marc R.

2015-01-01

Intermanual transfer refers to the phenomenon whereby unilateral motor training induces performance gains in both the trained limb and in the opposite, untrained limb. Evidence indicates that intermanual transfer is attenuated in older adults following training on a simple ballistic movement task, but not after training on a complex task. This study investigated whether differences in plasticity in bilateral motor cortices underlie these differential intermanual transfer effects in older adults. Twenty young (<35 years-old) and older adults (>65 years) trained on a simple (repeated ballistic thumb abduction) and complex (sequential finger-thumb opposition) task in separate sessions. Behavioral performance was used to quantify intermanual transfer between the dominant (trained) and non-dominant (untrained) hands. The amplitude of motor-evoked potentials induced by single pulse transcranial magnetic stimulation was used to investigate excitability changes in bilateral motor cortices. Contrary to predictions, both age groups exhibited performance improvements in both hands after unilateral skilled motor training with simple and complex tasks. These performance gains were accompanied by bilateral increases in cortical excitability in both groups for the simple but not the complex task. The findings suggest that advancing age does not necessarily influence the capacity for intermanual transfer after training with the dominant hand. PMID:25999856

Nominal and functional task difficulty in skill acquisition: Effects on performance in two tests of transfer.

PubMed

Sanli, Elizabeth A; Lee, Timothy D

2015-06-01

The influence of nominal and functional task difficulty during the acquisition of a motor skill was examined in two tests of transfer of learning. The task involved a ballistic, target-directed, finger action. Nominal task difficulty was defined as the distance of the target from the home position. Functional task difficulty was created by manipulating the progression of target distances during practice. Based on the challenge point framework (Guadagnoli & Lee, 2004), we predicted that practice with a set of targets farther away from the performer would benefit from less functional task difficulty, while practice with a closer set of targets would benefit from more functional task difficulty. In single-task transfer tests, learners who practiced using the high nominal task difficulty targets benefitted in terms of persistence of performance over time. In dual-task transfer tests, groups with an intermediate combined (nominal and functional) task difficulty performed with greater persistence over time on tests of transfer than those who practiced with the highest or lowest combined difficulty. Together these findings suggest that the influences of nominal and functional task difficulty during acquisition are weighted differentially depending upon the transfer test context. The challenge point framework does not accurately capture this complex relationship in its current form. Copyright © 2015 Elsevier B.V. All rights reserved.

Dissociable effects of practice variability on learning motor and timing skills.

PubMed

Caramiaux, Baptiste; Bevilacqua, Frédéric; Wanderley, Marcelo M; Palmer, Caroline

2018-01-01

Motor skill acquisition inherently depends on the way one practices the motor task. The amount of motor task variability during practice has been shown to foster transfer of the learned skill to other similar motor tasks. In addition, variability in a learning schedule, in which a task and its variations are interweaved during practice, has been shown to help the transfer of learning in motor skill acquisition. However, there is little evidence on how motor task variations and variability schedules during practice act on the acquisition of complex motor skills such as music performance, in which a performer learns both the right movements (motor skill) and the right time to perform them (timing skill). This study investigated the impact of rate (tempo) variability and the schedule of tempo change during practice on timing and motor skill acquisition. Complete novices, with no musical training, practiced a simple musical sequence on a piano keyboard at different rates. Each novice was assigned to one of four learning conditions designed to manipulate the amount of tempo variability across trials (large or small tempo set) and the schedule of tempo change (randomized or non-randomized order) during practice. At test, the novices performed the same musical sequence at a familiar tempo and at novel tempi (testing tempo transfer), as well as two novel (but related) sequences at a familiar tempo (testing spatial transfer). We found that practice conditions had little effect on learning and transfer performance of timing skill. Interestingly, practice conditions influenced motor skill learning (reduction of movement variability): lower temporal variability during practice facilitated transfer to new tempi and new sequences; non-randomized learning schedule improved transfer to new tempi and new sequences. Tempo (rate) and the sequence difficulty (spatial manipulation) affected performance variability in both timing and movement. These findings suggest that there is a dissociable effect of practice variability on learning complex skills that involve both motor and timing constraints.

Internally Heated Screw Pyrolysis Reactor (IHSPR) heat transfer performance study

NASA Astrophysics Data System (ADS)

Teo, S. H.; Gan, H. L.; Alias, A.; Gan, L. M.

2018-04-01

1.5 billion end-of-life tyres (ELT) were discarded globally each year and pyrolysis is considered the best solution to convert the ELT into valuable high energy-density products. Among all pyrolysis technologies, screw reactor is favourable. However, conventional screw reactor risks plugging issue due to its lacklustre heat transfer performance. An internally heated screw pyrolysis reactor (IHSPR) was developed by local renewable energy industry, which serves as the research subject for heat transfer performance study of this particular paper. Zero-load heating test (ZLHT) was first carried out to obtain the operational parameters of the reactor, followed by the one dimensional steady-state heat transfer analysis carried out using SolidWorks Flow Simulation 2016. Experiments with feed rate manipulations and pyrolysis products analyses were conducted last to conclude the study.

Electric Propulsion Performance from Geo-transfer to Geosynchronous Orbits

NASA Technical Reports Server (NTRS)

Dankanich, John W.; Carpenter, Christian B.

2007-01-01

For near-Earth application, solar electric propulsion advocates have focused on Low Earth Orbit (LEO) to Geosynchronous (GEO) low-thrust transfers because of the significant improvement in capability over chemical alternatives. While the performance gain attained from starting with a lower orbit is large, there are also increased transfer times and radiation exposure risk that has hindered the commercial advocacy for electric propulsion stages. An incremental step towards electric propulsion stages is the use of integrated solar electric propulsion systems (SEPS) for GTO to GEO transfer. Thorough analyses of electric propulsion systems options and performance are presented. Results are based on existing or near-term capabilities of Arcjets, Hall thrusters, and Gridded Ion engines. Parametric analyses based on "rubber" thruster and launch site metrics are also provided.

CCD charge collection efficiency and the photon transfer technique

NASA Technical Reports Server (NTRS)

Janesick, J.; Klaasen, K.; Elliott, T.

1985-01-01

The charge-coupled device (CCD) has shown unprecendented performance as a photon detector in the areas of spectral response, charge transfer, and readout noise. Recent experience indicates, however, that the full potential for the CCD's charge collection efficiency (CCE) lies well beyond that which is realized in currently available devices. A definition of CCE performance is presented and a standard test tool (the photon transfer technique) for measuring and optimizing this important CCD parameter is introduced. CCE characteristics for different types of CCDs are compared; the primary limitations in achieving high CCE performance are discussed, and the prospects for future improvement are outlined.

Anomalous heat transfer modes of nanofluids: a review based on statistical analysis

NASA Astrophysics Data System (ADS)

Sergis, Antonis; Hardalupas, Yannis

2011-05-01

This paper contains the results of a concise statistical review analysis of a large amount of publications regarding the anomalous heat transfer modes of nanofluids. The application of nanofluids as coolants is a novel practise with no established physical foundations explaining the observed anomalous heat transfer. As a consequence, traditional methods of performing a literature review may not be adequate in presenting objectively the results representing the bulk of the available literature. The current literature review analysis aims to resolve the problems faced by researchers in the past by employing an unbiased statistical analysis to present and reveal the current trends and general belief of the scientific community regarding the anomalous heat transfer modes of nanofluids. The thermal performance analysis indicated that statistically there exists a variable enhancement for conduction, convection/mixed heat transfer, pool boiling heat transfer and critical heat flux modes. The most popular proposed mechanisms in the literature to explain heat transfer in nanofluids are revealed, as well as possible trends between nanofluid properties and thermal performance. The review also suggests future experimentation to provide more conclusive answers to the control mechanisms and influential parameters of heat transfer in nanofluids.

Anomalous heat transfer modes of nanofluids: a review based on statistical analysis.

PubMed

Sergis, Antonis; Hardalupas, Yannis

2011-05-19

This paper contains the results of a concise statistical review analysis of a large amount of publications regarding the anomalous heat transfer modes of nanofluids. The application of nanofluids as coolants is a novel practise with no established physical foundations explaining the observed anomalous heat transfer. As a consequence, traditional methods of performing a literature review may not be adequate in presenting objectively the results representing the bulk of the available literature. The current literature review analysis aims to resolve the problems faced by researchers in the past by employing an unbiased statistical analysis to present and reveal the current trends and general belief of the scientific community regarding the anomalous heat transfer modes of nanofluids. The thermal performance analysis indicated that statistically there exists a variable enhancement for conduction, convection/mixed heat transfer, pool boiling heat transfer and critical heat flux modes. The most popular proposed mechanisms in the literature to explain heat transfer in nanofluids are revealed, as well as possible trends between nanofluid properties and thermal performance. The review also suggests future experimentation to provide more conclusive answers to the control mechanisms and influential parameters of heat transfer in nanofluids.

Computational investigation of fluid flow and heat transfer of an economizer by porous medium approach

NASA Astrophysics Data System (ADS)

Babu, C. Rajesh; Kumar, P.; Rajamohan, G.

2017-07-01

Computation of fluid flow and heat transfer in an economizer is simulated by a porous medium approach, with plain tubes having a horizontal in-line arrangement and cross flow arrangement in a coal-fired thermal power plant. The economizer is a thermal mechanical device that captures waste heat from the thermal exhaust flue gasses through heat transfer surfaces to preheat boiler feed water. In order to evaluate the fluid flow and heat transfer on tubes, a numerical analysis on heat transfer performance is carried out on an 110 t/h MCR (Maximum continuous rating) boiler unit. In this study, thermal performance is investigated using the computational fluid dynamics (CFD) simulation using ANSYS FLUENT. The fouling factor ε and the overall heat transfer coefficient ψ are employed to evaluate the fluid flow and heat transfer. The model demands significant computational details for geometric modeling, grid generation, and numerical calculations to evaluate the thermal performance of an economizer. The simulation results show that the overall heat transfer coefficient 37.76 W/(m2K) and economizer coil side pressure drop of 0.2 (kg/cm2) are found to be conformity within the tolerable limits when compared with existing industrial economizer data.

Anomalous heat transfer modes of nanofluids: a review based on statistical analysis

PubMed Central

2011-01-01

This paper contains the results of a concise statistical review analysis of a large amount of publications regarding the anomalous heat transfer modes of nanofluids. The application of nanofluids as coolants is a novel practise with no established physical foundations explaining the observed anomalous heat transfer. As a consequence, traditional methods of performing a literature review may not be adequate in presenting objectively the results representing the bulk of the available literature. The current literature review analysis aims to resolve the problems faced by researchers in the past by employing an unbiased statistical analysis to present and reveal the current trends and general belief of the scientific community regarding the anomalous heat transfer modes of nanofluids. The thermal performance analysis indicated that statistically there exists a variable enhancement for conduction, convection/mixed heat transfer, pool boiling heat transfer and critical heat flux modes. The most popular proposed mechanisms in the literature to explain heat transfer in nanofluids are revealed, as well as possible trends between nanofluid properties and thermal performance. The review also suggests future experimentation to provide more conclusive answers to the control mechanisms and influential parameters of heat transfer in nanofluids. PMID:21711932

Orbital Express fluid transfer demonstration system

NASA Astrophysics Data System (ADS)

Rotenberger, Scott; SooHoo, David; Abraham, Gabriel

2008-04-01

Propellant resupply of orbiting spacecraft is no longer in the realm of high risk development. The recently concluded Orbital Express (OE) mission included a fluid transfer demonstration that operated the hardware and control logic in space, bringing the Technology Readiness Level to a solid TRL 7 (demonstration of a system prototype in an operational environment). Orbital Express (funded by the Defense Advanced Research Projects Agency, DARPA) was launched aboard an Atlas-V rocket on March 9th, 2007. The mission had the objective of demonstrating technologies needed for routine servicing of spacecraft, namely autonomous rendezvous and docking, propellant resupply, and orbital replacement unit transfer. The demonstration system used two spacecraft. A servicing vehicle (ASTRO) performed multiple dockings with the client (NextSat) spacecraft, and performed a variety of propellant transfers in addition to exchanges of a battery and computer. The fluid transfer and propulsion system onboard ASTRO, in addition to providing the six degree-of-freedom (6 DOF) thruster system for rendezvous and docking, demonstrated autonomous transfer of monopropellant hydrazine to or from the NextSat spacecraft 15 times while on orbit. The fluid transfer system aboard the NextSat vehicle was designed to simulate a variety of client systems, including both blowdown pressurization and pressure regulated propulsion systems. The fluid transfer demonstrations started with a low level of autonomy, where ground controllers were allowed to review the status of the demonstration at numerous points before authorizing the next steps to be performed. The final transfers were performed at a full autonomy level where the ground authorized the start of a transfer sequence and then monitored data as the transfer proceeded. The major steps of a fluid transfer included the following: mate of the coupling, leak check of the coupling, venting of the coupling, priming of the coupling, fluid transfer, gauging of receiving tank, purging of coupling and de-mate of the coupling.

Imaging performance of an isotropic negative dielectric constant slab.

PubMed

Shivanand; Liu, Huikan; Webb, Kevin J

2008-11-01

The influence of material and thickness on the subwavelength imaging performance of a negative dielectric constant slab is studied. Resonance in the plane-wave transfer function produces a high spatial frequency ripple that could be useful in fabricating periodic structures. A cost function based on the plane-wave transfer function provides a useful metric to evaluate the planar slab lens performance, and using this, the optimal slab dielectric constant can be determined.

Investigation on heat transfer characteristics and flow performance of Methane at supercritical pressures

NASA Astrophysics Data System (ADS)

Xian, Hong Wei; Oumer, A. N.; Basrawi, F.; Mamat, Rizalman; Abdullah, A. A.

2018-04-01

The aim of this study is to investigate the heat transfer and flow characteristic of cryogenic methane in regenerative cooling system at supercritical pressures. The thermo-physical properties of supercritical methane were obtained from the National institute of Standards and Technology (NIST) webbook. The numerical model was developed based on the assumptions of steady, turbulent and Newtonian flow. For mesh independence test and model validation, the simulation results were compared with published experimental results. The effect of four different performance parameter ranges namely inlet pressure (5 to 8 MPa), inlet temperature (120 to 150 K), heat flux (2 to 5 MW/m2) and mass flux (7000 to 15000 kg/m2s) on heat transfer and flow performances were investigated. It was found that the simulation results showed good agreement with experimental data with maximum deviation of 10 % which indicates the validity of the developed model. At low inlet temperature, the change of specific heat capacity at near-wall region along the tube length was not significant while the pressure drop registered was high. However, significant variation was observed for the case of higher inlet temperature. It was also observed that the heat transfer performance and pressure drop penalty increased when the mass flux was increased. Regarding the effect of inlet pressure, the heat transfer performance and pressure drop results decreased when the inlet pressure is increased.

Toe transfer in congenital hand malformations.

PubMed

Foucher, G; Medina, J; Navarro, R; Nagel, D

2001-01-01

Fifty-eight patients with congenital hand abnormalities underwent 65 toe-to-hand transfers. Symbrachydactyly (51 cases) was the most frequent indication. Forty-seven second toe-to-hand transfers were performed in 44 patients. The mean follow-up time was 5.2 years. Two failures occurred in cases in which only one artery was anastomosed; no failures were noted when more than one artery fed the transfer. Two patients with a single second-toe transfer presented with lateral instability of the transferred metatarsophalangeal joint. The mean active range of motion was 38 degrees, with a mean extension lag of 25 degrees. The mean two-point discrimination was 5 mm. Forty-one patients used the transferred toe well, when performing activities of daily living and playing games. Toe-to-hand transfer, prior to the establishment of the grip pattern, facilitates integration of the transfer.

Transfer of motor learning engages specific neural substrates during motor memory consolidation dependent on the practice structure.

PubMed

Kantak, Shailesh S; Sullivan, Katherine J; Fisher, Beth E; Knowlton, Barbara J; Winstein, Carolee J

2011-01-01

The authors investigated how brain activity during motor-memory consolidation contributes to transfer of learning to novel versions of a motor skill following distinct practice structures. They used 1 Hz repetitive Transcranial Magnetic Stimulation (rTMS) immediately after constant or variable practice of an arm movement skill to interfere with primary motor cortex (M1) or dorsolateral prefrontal cortex (DLPFC). The effect of interference was assessed through skill performance on two transfer targets: one within and one outside the range of practiced movement parameters for the variable practice group. For the control (no rTMS) group, variable practice benefited delayed transfer performance more than constant practice. The rTMS effect on delayed transfer performance differed for the two transfer targets. For the within-range target, rTMS interference had no significant affect on the delayed transfer after either practice structure. However, for the outside-range target, rTMS interference to DLPFC but not M1 attenuated delayed transfer benefit following variable practice. Additionally, for the outside-range target, rTMS interference to M1 but not DLPFC attenuated delayed transfer following constant practice. This suggests that variable practice may promote reliance on DLPFC for memory consolidation associated with outside-range transfer of learning, whereas constant practice may promote reliance on M1 for consolidation and long-term transfer.

The interaction between practice and performance pressure on the planning and control of fast target directed movement.

PubMed

Allsop, Jonathan E; Lawrence, Gavin P; Gray, Robert; Khan, Michael A

2017-09-01

Pressure to perform often results in decrements to both outcome accuracy and the kinematics of motor skills. Furthermore, this pressure-performance relationship is moderated by the amount of accumulated practice or the experience of the performer. However, the interactive effects of performance pressure and practice on the underlying processes of motor skills are far from clear. Movement execution involves both an offline pre-planning process and an online control process. The present experiment aimed to investigate the interaction between pressure and practice on these two motor control processes. Two groups of participants (control and pressure; N = 12 and 12, respectively) practiced a video aiming amplitude task and were transferred to either a non-pressure (control group) or a pressure condition (pressure group) both early and late in practice. Results revealed similar accuracy and movement kinematics between the control and pressure groups at early transfer. However, at late transfer, the introduction of pressure was associated with increased performance compared to control conditions. Analysis of kinematic variability throughout the movement suggested that the performance increase was due to participants adopting strategies to improve movement planning in response to pressure reducing the effectiveness of the online control system.

Sex is not everything: the role of gender in early performance of a fundamental laparoscopic skill.

PubMed

Kolozsvari, Nicoleta O; Andalib, Amin; Kaneva, Pepa; Cao, Jiguo; Vassiliou, Melina C; Fried, Gerald M; Feldman, Liane S

2011-04-01

Existing literature on the acquisition of surgical skills suggests that women generally perform worse than men. This literature is limited by looking at an arbitrary number of trials and not adjusting for potential confounders. The objective of this study was to evaluate the impact of gender on the learning curve for a fundamental laparoscopic task. Thirty-two medical students performed the FLS peg transfer task and their scores were plotted to generate a learning curve. Nonlinear regression was used to estimate learning plateau and learning rate. Variables that may affect performance were assessed using a questionnaire. Innate visual-spatial abilities were evaluated using tests for spatial orientation, spatial scanning, and perceptual abilities. Score on first peg transfer attempt, learning plateau, and learning rate were compared for men and women using Student's t test. Innate abilities were correlated to simulator performance using Pearson's coefficient. Multivariate linear regression was used to investigate the effect of gender on early laparoscopic performance after adjusting for factors found significant on univariate analysis. Statistical significance was defined as P < 0.05. Nineteen men and 13 women participated in the study; 30 were right-handed, 12 reported high interest in surgery, and 26 had video game experience. There were no differences between men and women in initial peg transfer score, learning plateau, or learning rate. Initial peg transfer score and learning rate were higher in subjects who reported having a high interest in surgery (P = 0.02, P = 0.03). Initial score also correlated with perceptual ability score (P = 0.03). In multivariate analysis, only surgical interest remained a significant predictor of score on first peg transfer (P = 0.03) and learning rate (P = 0.02), while gender had no significant relationship to early performance. Gender did not affect the learning curve for a fundamental laparoscopic task, while interest in surgery and perceptual abilities did influence early performance.

MSG test report-steady-state heat transfer. [LMFBR

DOE Office of Scientific and Technical Information (OSTI.GOV)

Harty, R.B.

This report documents the results of the Steady-State Heat Transfer Tests conducted on the AI Modular Steam Generator (MSG), at the Sodium Component Test Installation (SCTI) of the Liquid Metal Engineering Center. Heat transfer and pressure drop performance data are given along with current predictions of performance. Departure from nucleate boiling characteristics is given. A dispersed flow film boiling model, employing thermal nonequilibrium, was used to analyze data in the film boiling region.

Effects of learning duration on implicit transfer.

PubMed

Tanaka, Kanji; Watanabe, Katsumi

2015-10-01

Implicit learning and transfer in sequence acquisition play important roles in daily life. Several previous studies have found that even when participants are not aware that a transfer sequence has been transformed from the learning sequence, they are able to perform the transfer sequence faster and more accurately; this suggests implicit transfer of visuomotor sequences. Here, we investigated whether implicit transfer could be modulated by the number of trials completed in a learning session. Participants learned a sequence through trial and error, known as the m × n task (Hikosaka et al. in J Neurophysiol 74:1652-1661, 1995). In the learning session, participants were required to successfully perform the same sequence 4, 12, 16, or 20 times. In the transfer session, participants then learned one of two other sequences: one where the button configuration Vertically Mirrored the learning sequence, or a randomly generated sequence. Our results show that even when participants did not notice the alternation rule (i.e., vertical mirroring), their total working time was less and their total number of errors was lower in the transfer session compared with those who performed a Random sequence, irrespective of the number of trials completed in the learning session. This result suggests that implicit transfer likely occurs even over a shorter learning duration.

Learning Organization and Transfer: Strategies for Improving Performance

ERIC Educational Resources Information Center

Weldy, Teresa G.

2009-01-01

Purpose: This study aims to explore a relationship between the learning organization and transfer of training as strategies for learning and managing knowledge to make performance improvements and gain or maintain a competitive advantage. Design/methodology/approach: Various similarities are identified in the literature that are indicative of a…

Combustion performance and heat transfer characterization of LOX/hydrocarbon type propellants

NASA Technical Reports Server (NTRS)

Gross, R. S.

1980-01-01

A sound data base was established by analytically and experimentally generating basic regenerative cooling, combustion performance, combustion stability, and combustion chamber heat transfer parameters for LOX/HC propellants, with specific application to second generation orbit maneuvering and reaction control systems (OMS/RCS) for the Space Shuttle Orbiter.

Process-Oriented Worked Examples: Improving Transfer Performance through Enhanced Understanding

ERIC Educational Resources Information Center

van Gog, Tamara; Paas, Fred; van Merrienboer, Jeroen J. G.

2004-01-01

The research on worked examples has shown that for novices, studying worked examples is often a more effective and efficient way of learning than solving conventional problems. This theoretical paper argues that adding process-oriented information to worked examples can further enhance transfer performance, especially for complex cognitive skills…

CFD analysis of heat transfer performance of graphene based hybrid nanofluid in radiators

NASA Astrophysics Data System (ADS)

Bharadwaj, Bharath R.; Sanketh Mogeraya, K.; Manjunath, D. M.; Rao Ponangi, Babu; Rajendra Prasad, K. S.; Krishna, V.

2018-04-01

For Improved performance of an automobile engine, Cooling systems are one of the critical systems that need attention. With increased capacity to carry away large amounts of wasted heat, performance of an engine is increased. Current research on Nano-fluids suggests that they offer higher heat transfer rate compared to that of conventional coolants. Hence this project seeks to investigate the use of hybrid-nanofluids in radiators so as to increase its heat transfer performance. Carboxyl Graphene and Graphene Oxide based nanoparticles were selected due to the very high thermal conductivity of Graphene. System Analysis of the radiator was performed by considering a small part of the whole automobile radiator modelled using SEIMENS NX. CFD analysis was conducted using ANSYS FLUENT® for the nanofluid defined and the increase in effectiveness was compared to that of conventional coolants. Usage of such nanofluids for a fixed cooling requirement in the future can lead to significant downsizing of the radiator.

The Effect of Core Configuration on Thermal Barrier Thermal Performance

NASA Technical Reports Server (NTRS)

DeMange, Jeffrey J.; Bott, Robert H.; Druesedow, Anne S.

2015-01-01

Thermal barriers and seals are integral components in the thermal protection systems (TPS) of nearly all aerospace vehicles. They are used to minimize heat transfer through interfaces and gaps and protect underlying temperature-sensitive components. The core insulation has a significant impact on both the thermal and mechanical properties of compliant thermal barriers. Proper selection of an appropriate core configuration to mitigate conductive, convective and radiative heat transfer through the thermal barrier is challenging. Additionally, optimization of the thermal barrier for thermal performance may have counteracting effects on mechanical performance. Experimental evaluations have been conducted to better understand the effect of insulation density on permeability and leakage performance, which can significantly impact the resistance to convective heat transfer. The effect of core density on mechanical performance was also previously investigated and will be reviewed. Simple thermal models were also developed to determine the impact of various core parameters on downstream temperatures. An extended understanding of these factors can improve the ability to design and implement these critical TPS components.

Flow and Thermal Performance of a Water-Cooled Periodic Transversal Elliptical Microchannel Heat Sink for Chip Cooling.

PubMed

Wei, Bo; Yang, Mo; Wang, Zhiyun; Xu, Hongtao; Zhang, Yuwen

2015-04-01

Flow and thermal performance of transversal elliptical microchannels were investigated as a passive scheme to enhance the heat transfer performance of laminar fluid flow. The periodic transversal elliptical micro-channel is designed and its pressure drop and heat transfer characteristics in laminar flow are numerically investigated. Based on the comparison with a conventional straight micro- channel having rectangular cross section, it is found that periodic transversal elliptical microchannel not only has great potential to reduce pressure drop but also dramatically enhances heat transfer performance. In addition, when the Reynolds number equals to 192, the pressure drop of the transversal elliptical channel is 36.5% lower than that of the straight channel, while the average Nusselt number is 72.8% higher; this indicates that the overall thermal performance of the periodic transversal elliptical microchannel is superior to the conventional straight microchannel. It is suggested that such transversal elliptical microchannel are attractive candidates for cooling future electronic chips effectively with much lower pressure drop.

High performance computation of radiative transfer equation using the finite element method

NASA Astrophysics Data System (ADS)

Badri, M. A.; Jolivet, P.; Rousseau, B.; Favennec, Y.

2018-05-01

This article deals with an efficient strategy for numerically simulating radiative transfer phenomena using distributed computing. The finite element method alongside the discrete ordinate method is used for spatio-angular discretization of the monochromatic steady-state radiative transfer equation in an anisotropically scattering media. Two very different methods of parallelization, angular and spatial decomposition methods, are presented. To do so, the finite element method is used in a vectorial way. A detailed comparison of scalability, performance, and efficiency on thousands of processors is established for two- and three-dimensional heterogeneous test cases. Timings show that both algorithms scale well when using proper preconditioners. It is also observed that our angular decomposition scheme outperforms our domain decomposition method. Overall, we perform numerical simulations at scales that were previously unattainable by standard radiative transfer equation solvers.

Guidance, navigation, and control trades for an Electric Orbit Transfer Vehicle

NASA Astrophysics Data System (ADS)

Zondervan, K. P.; Bauer, T. A.; Jenkin, A. B.; Metzler, R. A.; Shieh, R. A.

The USAF Space Division initiated the Electric Insertion Transfer Experiment (ELITE) in the fall of 1988. The ELITE space mission is planned for the mid 1990s and will demonstrate technological readiness for the development of operational solar-powered electric orbit transfer vehicles (EOTVs). To minimize the cost of ground operations, autonomous flight is desirable. Thus, the guidance, navigation, and control (GNC) functions of an EOTV should reside on board. In order to define GNC requirements for ELITE, parametric trades must be performed for an operational solar-powered EOTV so that a clearer understanding of the performance aspects is obtained. Parametric trades for the GNC subsystems have provided insight into the relationship between pointing accuracy, transfer time, and propellant utilization. Additional trades need to be performed, taking into account weight, cost, and degree of autonomy.

Efficient Yttrium(III) Chloride-Treated TiO2 Electron Transfer Layers for Performance-Improved and Hysteresis-Less Perovskite Solar Cells.

PubMed

Li, Minghua; Huan, Yahuan; Yan, Xiaoqin; Kang, Zhuo; Guo, Yan; Li, Yong; Liao, Xinqin; Zhang, Ruxiao; Zhang, Yue

2018-01-10

Hybrid organic-inorganic metal halide perovskite solar cells have attracted widespread attention, owing to their high performance, and have undergone rapid development. In perovskite solar cells, the charge transfer layer plays an important role for separating and transferring photogenerated carriers. In this work, an efficient YCl 3 -treated TiO 2 electron transfer layer (ETL) is used to fabricate perovskite solar cells with enhanced photovoltaic performance and less hysteresis. The YCl 3 -treated TiO 2 layers bring about an upward shift of the conduction band minimum (E CBM ), which results in a better energy level alignment for photogenerated electron transfer and extraction from the perovskite into the TiO 2 layer. After optimization, perovskite solar cells based on the YCl 3 -treated TiO 2 layers achieve a maximum power conversion efficiency of about 19.99 % (19.29 % at forward scan) and a steady-state power output of about 19.6 %. Steady-state and time-resolved photoluminescence measurements and impedance spectroscopy are carried out to investigate the charge transfer and recombination dynamics between the perovskite and the TiO 2 electron transfer layer interface. The improved perovskite/TiO 2 ETL interface with YCl 3 treatment is found to separate and extract photogenerated charge rapidly and suppress recombination effectively, which leads to the improved performance. © 2018 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

The effects of aging on the asymmetry of inter-limb transfer in a visuomotor task.

PubMed

Pan, Zhujun; Van Gemmert, Arend W A

2013-09-01

The direction of the asymmetry of inter-limb transfer has been suggested to identify the specialization of each hemisphere when performing a motor task. In an earlier study, we showed that trajectory information is only transferred from the right to the left hand, while final movement outcome-associated parameters transferred in both directions when right-hand-dominant individuals perform a motor task with visual distorted feedback. In the current study, we try to replicate this finding in young adults and test whether the asymmetry of inter-limb transfer in visuomotor task reduces in older adults, suggesting that hemispheric lateralization reduces with age. Young and older adults (all right-hand-dominant) performed a multidirectional point-to-point drawing task in which the visual feedback was rotated and the gain was increased. Half of the participants in each age group trained with the right hand and the other half trained with the left hand. Performances of both hands with non-distorted and distorted visual feedback were collected from all participants before and after the training session. The results showed that the pattern of inter-limb transfer was similar between young and older adults, i.e., inter-limb transfer is asymmetric for initial direction and symmetric for movement time and trajectory length. The results suggest that older adults retain the specialized functions of the non-dominant (right) hemisphere allowing them to program movement direction of a graphic aiming task when visual feedback is distorted.

Does self-efficacy mediate transfer effects in the learning of easy and difficult motor skills?

PubMed

Stevens, David; Anderson, David I; O'Dwyer, Nicholas J; Mark Williams, A

2012-09-01

The effect of task difficulty on inter-task transfer is a classic issue in motor learning. We examined the relation between self-efficacy and transfer of learning after practicing different versions of a stick balancing task. Practicing the same task or an easier version led to significant pre- to post-test transfer of learning, whereas practicing a more difficult version did not. Self-efficacy increased modestly from pre- to post-test with easy practice, but decreased significantly with difficult practice. In addition, self-efficacy immediately prior to the post-test was significantly lower after difficult practice than easy or intermediate practice. Self-efficacy immediately prior to the post-test, performance at the end of practice, and pre-test performance explained 75% of the variance in post-test performance. The mediating role of self-efficacy on transfer of learning offers an alternative explanation for recent findings on the superiority of easy-to-difficult transfer and may help clarify inconsistencies in earlier research. Copyright © 2012 Elsevier Inc. All rights reserved.

Computer task performance by subjects with Duchenne muscular dystrophy.

PubMed

Malheiros, Silvia Regina Pinheiro; da Silva, Talita Dias; Favero, Francis Meire; de Abreu, Luiz Carlos; Fregni, Felipe; Ribeiro, Denise Cardoso; de Mello Monteiro, Carlos Bandeira

2016-01-01

Two specific objectives were established to quantify computer task performance among people with Duchenne muscular dystrophy (DMD). First, we compared simple computational task performance between subjects with DMD and age-matched typically developing (TD) subjects. Second, we examined correlations between the ability of subjects with DMD to learn the computational task and their motor functionality, age, and initial task performance. The study included 84 individuals (42 with DMD, mean age of 18±5.5 years, and 42 age-matched controls). They executed a computer maze task; all participants performed the acquisition (20 attempts) and retention (five attempts) phases, repeating the same maze. A different maze was used to verify transfer performance (five attempts). The Motor Function Measure Scale was applied, and the results were compared with maze task performance. In the acquisition phase, a significant decrease was found in movement time (MT) between the first and last acquisition block, but only for the DMD group. For the DMD group, MT during transfer was shorter than during the first acquisition block, indicating improvement from the first acquisition block to transfer. In addition, the TD group showed shorter MT than the DMD group across the study. DMD participants improved their performance after practicing a computational task; however, the difference in MT was present in all attempts among DMD and control subjects. Computational task improvement was positively influenced by the initial performance of individuals with DMD. In turn, the initial performance was influenced by their distal functionality but not their age or overall functionality.

Development of a High-Performance Fin-and-Tube Heat Exchanger with Vortex Generators for a Vending Machine

NASA Astrophysics Data System (ADS)

Iwasaki, Masamichi; Saito, Hiroshi; Mochizuki, Sadanari; Murata, Akira

The effect of delta-wing-vortex generators (combination of a delta wing and a delta winglet pair) on the heat transfer performance of fin-and-tube heat exchangers for vending machines has been investegated. Flow visualizations, numerical simulations and heat transfer experiments were conducted to find an optimum geometrical shape and arrangement of the vortex generators. Maximum heat transfer enhancement was achieved by the combination of (a) the delta wing with the apex angle of 86 degrees and (b) the delta winglet pair with the inline angle of 45 degrees. In relatively low Reynolds number range, about 40 % increase in heat transfer coefficient was attained with the above mentioned combination of the vortex generators compared to the ordinary heat exchangers with plain fins. It was revealed that the heat transfer enhancement was attributed to (1) the longitudinal vortexes generated by the delta wing and (2) the reduction of wake area behind the tube. It was also found that an increase in the apex angle of the delta wing brought about heat transfer enhancement, and the scale as well as the streggth of the induced longitudinal vortices played an important role in the heat transfer performance.

Generalized variables for controlling Government Transfer Services with respect to performance measures

NASA Technical Reports Server (NTRS)

Johnson, F. D.

1981-01-01

The term Government Transfer Services is used in reference to any of the organized streams of public resources that flow into private economic activity. This includes such activities as offshore leasing, Social Security, and NASA technology transfer services. This paper describes a performance measure, empirical results, a theory, and a control model for such services. These are illustrated by a specific example (NASA). An agenda for developing this service control method is also presented.

Effectiveness of a multi-channel volumetric air receiver for a solar power tower

NASA Astrophysics Data System (ADS)

Jung, Eui Guk; Boo, Joon Hong; Kang, Yong Heak; Kim, Nak Hoon

2013-08-01

In this study, the heat transfer performance of a multi-channel volumetric air receiver for a solar power tower was numerically analyzed. The governing equations, including the solar radiation heat flux, conduction, convection and radiation heat transfer for a single channel, were solved on the basis of valid related references and a methodology that can predict the temperature distribution of the receiver wall and the heat transfer fluid for specific dimensions and input conditions. Furthermore, a mathematical model of the effectiveness of the receiver was derived from an analysis of the temperature profiles of the wall and the heat transfer fluid. The receiver effectiveness as an appropriate criterion to assess economic feasibility regarding geometric size was investigated, as it would be applied to the design process of the receiver. The main parameters for the thermal performance simulations described in this paper are the air mass flow rate, receiver length and the influence of these parameters on the heat transfer performance from the viewpoint of receiver efficiency and effectiveness.

Integration Of Heat Transfer Coefficient In Glass Forming Modeling With Special Interface Element

NASA Astrophysics Data System (ADS)

Moreau, P.; César de Sá, J.; Grégoire, S.; Lochegnies, D.

2007-05-01

Numerical modeling of the glass forming processes requires the accurate knowledge of the heat exchange between the glass and the forming tools. A laboratory testing is developed to determine the evolution of the heat transfer coefficient in different glass/mould contact conditions (contact pressure, temperature, lubrication…). In this paper, trials are performed to determine heat transfer coefficient evolutions in experimental conditions close to the industrial blow-and-blow process conditions. In parallel of this work, a special interface element is implemented in a commercial Finite Element code in order to deal with heat transfer between glass and mould for non-meshing meshes and evolutive contact. This special interface element, implemented by using user subroutines, permits to introduce the previous heat transfer coefficient evolutions in the numerical modelings at the glass/mould interface in function of the local temperatures, contact pressures, contact time and kind of lubrication. The blow-and-blow forming simulation of a perfume bottle is finally performed to assess the special interface element performance.

40 CFR 60.254 - Standards for coal processing and conveying equipment, coal storage systems, transfer and loading...

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 6 2010-07-01 2010-07-01 false Standards for coal processing and conveying equipment, coal storage systems, transfer and loading systems, and open storage piles. 60.254... (CONTINUED) STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES Standards of Performance for Coal Preparation...

An Integrative Model of Organizational Learning and Social Capital on Effective Knowledge Transfer and Perceived Organizational Performance

ERIC Educational Resources Information Center

Rhodes, Jo; Lok, Peter; Hung, Richard Yu-Yuan; Fang, Shih-Chieh

2008-01-01

Purpose: The purpose of this paper is to set out to examine the relationships of organizational learning, social capital and the effectiveness of knowledge transfer and perceived organisational performance. Integrating organizational learning capability with social capital networks to shape a holistic knowledge sharing and management enterprise…

The Impact of Virtual Collaboration and Collaboration Technologies on Knowledge Transfer and Team Performance in Distributed Organizations

ERIC Educational Resources Information Center

Ngoma, Ngoma Sylvestre

2013-01-01

Virtual teams are increasingly viewed as a powerful determinant of competitive advantage in geographically distributed organizations. This study was designed to provide insights into the interdependencies between virtual collaboration, collaboration technologies, knowledge transfer, and virtual team performance in an effort to understand whether…

49 CFR 173.319 - Cryogenic liquids in tank cars.

Code of Federal Regulations, 2014 CFR

2014-10-01

... increase more than 25 microns during the 24-hour period; or (ii) Calculated heat transfer rate test. The insulation system must be performance tested as prescribed in § 179.400-4 of this subchapter. When the calculated heat transfer rate test is performed, the absolute pressure in the annular space of the loaded...

49 CFR 173.319 - Cryogenic liquids in tank cars.

Code of Federal Regulations, 2012 CFR

2012-10-01

... increase more than 25 microns during the 24-hour period; or (ii) Calculated heat transfer rate test. The insulation system must be performance tested as prescribed in § 179.400-4 of this subchapter. When the calculated heat transfer rate test is performed, the absolute pressure in the annular space of the loaded...

49 CFR 173.319 - Cryogenic liquids in tank cars.

Code of Federal Regulations, 2013 CFR

2013-10-01

... increase more than 25 microns during the 24-hour period; or (ii) Calculated heat transfer rate test. The insulation system must be performance tested as prescribed in § 179.400-4 of this subchapter. When the calculated heat transfer rate test is performed, the absolute pressure in the annular space of the loaded...

49 CFR 173.319 - Cryogenic liquids in tank cars.

Code of Federal Regulations, 2011 CFR

2011-10-01

... increase more than 25 microns during the 24-hour period; or (ii) Calculated heat transfer rate test. The insulation system must be performance tested as prescribed in § 179.400-4 of this subchapter. When the calculated heat transfer rate test is performed, the absolute pressure in the annular space of the loaded...

49 CFR 173.319 - Cryogenic liquids in tank cars.

Code of Federal Regulations, 2010 CFR

2010-10-01

... increase more than 25 microns during the 24-hour period; or (ii) Calculated heat transfer rate test. The insulation system must be performance tested as prescribed in § 179.400-4 of this subchapter. When the calculated heat transfer rate test is performed, the absolute pressure in the annular space of the loaded...

The Reverse Transfer Student: A Growing Factor in Higher Education

ERIC Educational Resources Information Center

Brimm, Jack; Achilles, C. M.

1976-01-01

A study of 195 reverse transfer students showed that following a poor academic performance at the university, the students achieved satisfactorily at the two-year college. Students who later returned to the university improved their grades with each quarter's course work. Factors associated with academic performance at the two institutions are…

Relationship between Fiber Furnish and the Structural Performance of MDF

Treesearch

Leslie H. Groom; Laurence Mott; Stephen Shaler

1999-01-01

The structural performance of medium density fiberboard (MDF) is attributable to three primary variables which are: physical and mechanical properties of individual wood fibers; fiber-to-fiber stress transfer; and fiber orientation. These origins of fiber properties and stress transfer can be traced to the fiber generation method wherein fiber orientation is associated...

Academic Performance of Community College Transfers: Psychological, Sociodemographic, and Educational Correlates

ERIC Educational Resources Information Center

Wang, Xueli

2012-01-01

This study focuses on the academic performance of community college transfer students at four-year institutions. It uses a nationally representative sample from the National Education Longitudinal Study of 1988 (NELS: 88/2000) and the Postsecondary Education Transcript Study (PETS). Results from an Ordinary Least Squares regression model suggest…

Training Transfer: A Suggested Course of Action for Local Authorities to Leverage Performance

ERIC Educational Resources Information Center

Ascher, Jacques

2013-01-01

Maximization of training influence on individual performance through changes in employee knowledge, skills, and abilities is a paramount concern of organizations. However, training without implementation in a work setting cannot achieve its goals. In this article, the author maps the primary factors that influence transfer of what is learned in…

Academic Venturing in Higher Education: Institutional Effects on Performance of University Technology Transfer. ASHE Annual Meeting Paper.

ERIC Educational Resources Information Center

Powers, Joshua B.

This study investigated institutional resource factors that may explain differential performance with university technology transfer--the process by which university research is transformed into marketable products. Using multi-source data on 108 research universities, a set of internal resources (financial, physical, human capital, and…

How Do Transfer Students Perform in Economics? Evidence from Intermediate Macroeconomics

ERIC Educational Resources Information Center

Asarta, Carlos J.; Fuess, Scott M., Jr.; Perumal, Andrew

2013-01-01

For students taking intermediate-level economics, does it matter where they studied principles of economics? Does transferring college credit influence subsequent academic performance in economics? With a sample covering 1999-2008, the authors analyze in this article a group of nearly 1,000 students taking intermediate macroeconomics at a…

Motivational and Metacognitive Aspects of Strategy Use and Transfer.

ERIC Educational Resources Information Center

Weed, Keri; And Others

The influences of locus of control, awareness of control and metacognition on the use and transfer of a trained strategy were examined. Specifically, it was hypothesized that internal locus of control would be associated with more strategic performance, and that those children who were able to both accurately assess their performance with and…

Influence of the liquid-phase mass transfer on the performance of a packed-bed bioreactor for wastewater treatment.

PubMed

Sarti, A; Vieira, L G; Foresti, E; Zaiat, M

2001-07-01

This paper reports on the influence of the liquid-phase mass transfer on the performance of a horizontal-flow, anaerobic, immobilized-biomass (HAIB) reactor treating low-strength wastewater. The HAIB reactor was subjected to liquid superficial velocities (vs) ranging from 10 to 50 cm h(-1), corresponding to hydraulic detention time (theta h) of 10-2 h. The best performance was achieved at an overall theta h of 3.3 h due to the interdependence of biochemical reactions and mass transfer mechanisms for process optimization. The HAIB reactor was provided with four intermediate sampling ports, and the values of v(s) were fixed to permit sampling at different ports corresponding to thetah of 2 h as vs increased. The chemical oxygen demand removal (COD) efficiencies increased from 68% to 82% with the increase of v(s) from 10 to 50 cm h(-1). It could be concluded that the performance of the HAIB reactor was improved significantly by increasing vs, thus decreasing the liquid-phase mass transfer resistance.

Assessment of different radiative transfer equation solvers for combined natural convection and radiation heat transfer problems

NASA Astrophysics Data System (ADS)

Sun, Yujia; Zhang, Xiaobing; Howell, John R.

2017-06-01

This work investigates the performance of the DOM, FVM, P1, SP3 and P3 methods for 2D combined natural convection and radiation heat transfer for an absorbing, emitting medium. The Monte Carlo method is used to solve the RTE coupled with the energy equation, and its results are used as benchmark solutions. Effects of the Rayleigh number, Planck number and optical thickness are considered, all covering several orders of magnitude. Temperature distributions, heat transfer rate and computational performance in terms of accuracy and computing time are presented and analyzed.

High-performance blue phosphorescent OLEDs using energy transfer from exciplex.

PubMed

Seino, Yuki; Sasabe, Hisahiro; Pu, Yong-Jin; Kido, Junji

2014-03-12

An efficient energy transfer from an exciplex between a sulfone and an arylamine derivatives to a blue phosphorescent emitter enables OLED performances among the best, of over 50 lm W(-1) at 100 cd m(-2) . The formation of the exciplex realizes a barrier-free hole-electron recombination pathway, thereby leading to high OLED performances with an extremely low driving voltage of 2.9 V at 100 cd m(-2) . © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Use of localized performance-based functions for the specification and correction of hybrid imaging systems

NASA Astrophysics Data System (ADS)

Lisson, Jerold B.; Mounts, Darryl I.; Fehniger, Michael J.

1992-08-01

Localized wavefront performance analysis (LWPA) is a system that allows the full utilization of the system optical transfer function (OTF) for the specification and acceptance of hybrid imaging systems. We show that LWPA dictates the correction of wavefront errors with the greatest impact on critical imaging spatial frequencies. This is accomplished by the generation of an imaging performance map-analogous to a map of the optic pupil error-using a local OTF. The resulting performance map a function of transfer function spatial frequency is directly relatable to the primary viewing condition of the end-user. In addition to optimizing quality for the viewer it will be seen that the system has the potential for an improved matching of the optical and electronic bandpass of the imager and for the development of more realistic acceptance specifications. 1. LOCAL WAVEFRONT PERFORMANCE ANALYSIS The LWPA system generates a local optical quality factor (LOQF) in the form of a map analogous to that used for the presentation and evaluation of wavefront errors. In conjunction with the local phase transfer function (LPTF) it can be used for maximally efficient specification and correction of imaging system pupil errors. The LOQF and LPTF are respectively equivalent to the global modulation transfer function (MTF) and phase transfer function (PTF) parts of the OTF. The LPTF is related to difference of the average of the errors in separated regions of the pupil. Figure

Improving the performance of the mass transfer-based reference evapotranspiration estimation approaches through a coupled wavelet-random forest methodology

NASA Astrophysics Data System (ADS)

Shiri, Jalal

2018-06-01

Among different reference evapotranspiration (ETo) modeling approaches, mass transfer-based methods have been less studied. These approaches utilize temperature and wind speed records. On the other hand, the empirical equations proposed in this context generally produce weak simulations, except when a local calibration is used for improving their performance. This might be a crucial drawback for those equations in case of local data scarcity for calibration procedure. So, application of heuristic methods can be considered as a substitute for improving the performance accuracy of the mass transfer-based approaches. However, given that the wind speed records have usually higher variation magnitudes than the other meteorological parameters, application of a wavelet transform for coupling with heuristic models would be necessary. In the present paper, a coupled wavelet-random forest (WRF) methodology was proposed for the first time to improve the performance accuracy of the mass transfer-based ETo estimation approaches using cross-validation data management scenarios in both local and cross-station scales. The obtained results revealed that the new coupled WRF model (with the minimum scatter index values of 0.150 and 0.192 for local and external applications, respectively) improved the performance accuracy of the single RF models as well as the empirical equations to great extent.

Field tests of 2- and 40-tube condensers at the East Mesa Geothermal Test Site

DOE Office of Scientific and Technical Information (OSTI.GOV)

Murphy, R.W.; Domingo, N.

1982-05-01

Two water-cooled isobutane condensers, one with 2 tubes and one with 40 tubes, were subjected to field tests at the East Mesa Geothermal Test Site to assess relative heat transfer performance in both surface evaporator and direct-contact evaporator modes. The five groups of tests established that field performance was below earlier laboratory-determined levels and that direct-contact evaporator mode performance was poorer than that for the surface evaporator mode. In all test situations, fluted condenser tubes performed better than smooth condenser tubes. Cooling water quality had no significant effect on performance, but brine preflash in the direct-contact mode did promote somemore » relative performance improvement. Important implications of these results for binary geothermal power plants are that (1) working-fluid-side impurities can significantly degrade heat transfer performance of the power plant condensers and (2) provisions for minimizing such impurities may be required.« less

Saving robots improves laparoscopic performance: transfer of skills from a serious game to a virtual reality simulator.

PubMed

IJgosse, Wouter M; van Goor, Harry; Luursema, Jan-Maarten

2018-01-18

Residents find it hard to commit to structural laparoscopic skills training. Serious gaming has been proposed as a solution on the premise that it is effective and more motivating than traditional simulation. We establish construct validity for the laparoscopic serious game Underground by comparing laparoscopic simulator performance for a control group and an Underground training group. A four-session laparoscopic basic skills course is part of the medical master students surgical internship at the Radboud University Medical Centre. Four cohorts, representing 107 participants, were assigned to either the Underground group or the control group. The control group trained on the FLS video trainer and the LapSim virtual reality simulator for four sessions. The Underground group played Underground for three sessions followed by a transfer session on the FLS video trainer and the LapSim. To assess the effect of engaging in serious gameplay on performance on two validated laparoscopic simulators, initial performance on the FLS video trainer and the LapSim was compared between the control group (first session) and the Underground group (fourth session). We chose task duration as a proxy for laparoscopic performance. The Underground group outperformed the control group on all three LapSim tasks: Camera navigation F(1) = 12.71, p < .01; Instrument navigation F(1) = 8.04, p < .01; and Coordination F(1) = 6.36, p = .01. There was no significant effect of playing Underground for performance on the FLS video trainer Peg Transfer task, F(1) = 0.28, p = .60. We demonstrated skills transfer between a serious game and validated laparoscopic simulator technology. Serious gaming may become a valuable, cost-effective addition to the skillslab, if transfer to the operating room can be established. Additionally, we discuss sources of transferable skills to help explain our and previous findings.

Large-scale studies on the transferability of general problem-solving skills and the pedagogic potential of physics

NASA Astrophysics Data System (ADS)

Mashood, K. K.; Singh, Vijay A.

2013-09-01

Research suggests that problem-solving skills are transferable across domains. This claim, however, needs further empirical substantiation. We suggest correlation studies as a methodology for making preliminary inferences about transfer. The correlation of the physics performance of students with their performance in chemistry and mathematics in highly competitive problem-solving examinations was studied using a massive database. The sample sizes ranged from hundreds to a few hundred thousand. Encouraged by the presence of significant correlations, we interviewed 20 students to explore the pedagogic potential of physics in imparting transferable problem-solving skills. We report strategies and practices relevant to physics employed by these students which foster transfer.

Multiple nodes transfer alignment for airborne missiles based on inertial sensor network

NASA Astrophysics Data System (ADS)

Si, Fan; Zhao, Yan

2017-09-01

Transfer alignment is an important initialization method for airborne missiles because the alignment accuracy largely determines the performance of the missile. However, traditional alignment methods are limited by complicated and unknown flexure angle, and cannot meet the actual requirement when wing flexure deformation occurs. To address this problem, we propose a new method that uses the relative navigation parameters between the weapons and fighter to achieve transfer alignment. First, in the relative inertial navigation algorithm, the relative attitudes and positions are constantly computed in wing flexure deformation situations. Secondly, the alignment results of each weapon are processed using a data fusion algorithm to improve the overall performance. Finally, the feasibility and performance of the proposed method were evaluated under two typical types of deformation, and the simulation results demonstrated that the new transfer alignment method is practical and has high-precision.

Particle size and interfacial effects on heat transfer characteristics of water and {alpha}-SiC nanofluids.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Timofeeva, E.; Smith, D. S.; Yu, W.

2010-01-01

The effect of average particle sizes on basic macroscopic properties and heat transfer performance of {alpha}-SiC/water nanofluids was investigated. The average particle sizes, calculated from the specific surface area of nanoparticles, were varied from 16 to 90 nm. Nanofluids with larger particles of the same material and volume concentration provide higher thermal conductivity and lower viscosity increases than those with smaller particles because of the smaller solid/liquid interfacial area of larger particles. It was also demonstrated that the viscosity of water-based nanofluids can be significantly decreased by pH of the suspension independently from the thermal conductivity. Heat transfer coefficients weremore » measured and compared to the performance of base fluids as well as to nanofluids reported in the literature. Criteria for evaluation of the heat transfer performance of nanofluids are discussed and optimum directions in nanofluid development are suggested.« less

Coherent manipulation of non-thermal spin order in optical nuclear polarization experiments

NASA Astrophysics Data System (ADS)

Buntkowsky, Gerd; Ivanov, Konstantin L.; Zimmermann, Herbert; Vieth, Hans-Martin

2017-03-01

Time resolved measurements of Optical Nuclear Polarization (ONP) have been performed on hyperpolarized triplet states in molecular crystals created by light excitation. Transfer of the initial electron polarization to nuclear spins has been studied in the presence of radiofrequency excitation; the experiments have been performed with different pulse sequences using different doped molecular systems. The experimental results clearly demonstrate the dominant role of coherent mechanisms of spin order transfer, which manifest themselves in well pronounced oscillations. These oscillations are of two types, precessions and nutations, having characteristic frequencies, which are the same for the different molecular systems and the pulse sequences applied. Hence, precessions and nutations constitute a general feature of polarization transfer in ONP experiments. In general, coherent manipulation of spin order transfer creates a powerful resource for improving the performance of the ONP method, which paves the way to strong signal enhancement in nuclear magnetic resonance.

High-frequency self-aligned graphene transistors with transferred gate stacks.

PubMed

Cheng, Rui; Bai, Jingwei; Liao, Lei; Zhou, Hailong; Chen, Yu; Liu, Lixin; Lin, Yung-Chen; Jiang, Shan; Huang, Yu; Duan, Xiangfeng

2012-07-17

Graphene has attracted enormous attention for radio-frequency transistor applications because of its exceptional high carrier mobility, high carrier saturation velocity, and large critical current density. Herein we report a new approach for the scalable fabrication of high-performance graphene transistors with transferred gate stacks. Specifically, arrays of gate stacks are first patterned on a sacrificial substrate, and then transferred onto arbitrary substrates with graphene on top. A self-aligned process, enabled by the unique structure of the transferred gate stacks, is then used to position precisely the source and drain electrodes with minimized access resistance or parasitic capacitance. This process has therefore enabled scalable fabrication of self-aligned graphene transistors with unprecedented performance including a record-high cutoff frequency up to 427 GHz. Our study defines a unique pathway to large-scale fabrication of high-performance graphene transistors, and holds significant potential for future application of graphene-based devices in ultra-high-frequency circuits.

Assessing Ink Transfer Performance of Gravure-Offset Fine-Line Circuitry Printing

NASA Astrophysics Data System (ADS)

Cheng, Hsien-Chie; Chen, You-Wei; Chen, Wen-Hwa; Lu, Su-Tsai; Lin, Shih-Ming

2018-03-01

In this study, the printing mechanism and performance of gravure-offset fine-line circuitry printing technology are investigated in terms of key printing parameters through experimental and theoretical analyses. First, the contact angles of the ink deposited on different substrates, blankets, and gravure metal plates are experimentally determined; moreover, their temperature and solvent content dependences are analyzed. Next, the ink solvent absorption and evaporation behaviors of the blankets at different temperatures, times, and numbers of printing repetitions are characterized by conducting experiments. In addition, while printing repeatedly, the surface characteristics of the blankets, such as the contact angle, vary with the amount of absorbed ink solvent, further affecting the ink transfer performance (ratio) and printing quality. Accordingly, the surface effect of the blanket due to ink solvent absorption on the ink contact angle is analyzed. Furthermore, the amount of ink transferred from the gravure plate to the blanket in the "off process" and from the blanket to the substrate in the "set process" is evaluated by conducting a simplified plate-to-plate experiment. The influences of loading rate (printing velocity), temperature, and solvent content on the ink transfer performance are addressed. Finally, the ink transfer mechanism is theoretically analyzed for different solvent contents using Surface Evolver. The calculation results are compared with those of the experiment.

Experimental study of Cu-water nanofluid forced convective flow inside a louvered channel

NASA Astrophysics Data System (ADS)

Khoshvaght-Aliabadi, M.; Hormozi, F.; Zamzamian, A.

2015-03-01

Heat transfer enhancement plays a very important role for energy saving in plate-fin heat exchangers. In the present study, the influences of simultaneous utilization of a louvered plate-fin channel and copper-base deionized water nanofluid on performance of these exchangers are experimentally explored. The effects of flow rate (2-5 l/min) and nanoparticles weight fraction (0-0.4 %) on heat transfer and pressure drop characteristics are determined. Experimental results indicate that the use of louvered channel instead of the plain one can improve the heat transfer performance. Likewise, addition of small amounts of copper nanoparticles to the base fluid augments the convective heat transfer coefficient remarkably. The maximum rise of 21.7 % in the convective heat transfer coefficient is observed for the 0.4 % wt nanofluid compared to the base fluid. Also, pumping power for the base fluid and nanofluids are calculated based on the measured pressure drop in the louvered channel. The average increase in pumping power is 11.8 % for the nanofluid with 0.4 % wt compared to the base fluid. Applied performance criterion shows a maximum performance index of 1.167 for the nanofluid with 0.1 % wt Finally, two correlations are proposed for Nusselt number and friction factor which fit the experimental data with in ±10 %.

Transfer and interference of motor skills in people with intellectual disability.

PubMed

Mohan, A; Singh, A P; Mandal, M K

2001-08-01

Atypical laterality (i.e. the lack of a clear pattern of lateralization) has been found to be a characteristic feature of individuals with intellectual disability (ID). The evidence for this has been based on 'handedness' studies which have contained little information about the ability of people with ID to carry out interhemispheric tasks reflecting bilateral transfer or interference. The present study examined this capacity in individuals with ID by utilizing bilateral transfer and interference paradigms. Right-handed subjects with ID (IQ = 55-76) and controls matched for age and sex were tested for bilateral transfer of motor skill in contralateral hands with a mirror-drawing task. The subjects were also tested for their ability to perform a finger-tapping task while processing verbal and non-verbal stimuli. The findings indicated that people with ID are significantly deficient relative to matched controls in bilateral transfer of motor skills from their non-preferred (left) hand to their preferred (right) one. The effect of interference during performance of the dual task was significantly greater in individuals with ID. Subjects with ID were found to perform better with their non-preferred than with their preferred hand. A within-group comparison revealed that right-handed performance was more affected by interference than left in these subjects.

Numerical study of the thermo-flow performances of novel finned tubes for air-cooled condensers in power plant

NASA Astrophysics Data System (ADS)

Guo, Yonghong; Du, Xiaoze; Yang, Lijun

2018-02-01

Air-cooled condenser is the main equipment of the direct dry cooling system in a power plant, which rejects heat of the exhaust steam with the finned tube bundles. Therefore, the thermo-flow performances of the finned tubes have an important effect on the optimal operation of the direct dry cooling system. In this paper, the flow and heat transfer characteristics of the single row finned tubes with the conventional flat fins and novel jagged fins are investigated by numerical method. The flow and temperature fields of cooling air for the finned tubes are obtained. Moreover, the variations of the flow resistance and average convection heat transfer coefficient under different frontal velocity of air and jag number are presented. Finally, the correlating equations of the friction factor and Nusselt number versus the Reynolds number are fitted. The results show that with increasing the frontal velocity of air, the heat transfer performances of the finned tubes are enhanced but the pressure drop will increase accordingly, resulting in the average convection heat transfer coefficient and friction factor increasing. Meanwhile, with increasing the number of fin jag, the heat transfer performance is intensified. The present studies provide a reference in optimal designing for the air-cooled condenser of direct air cooling system.

Experimental Investigation on Effect of Fin Shape on the Thermal-Hydraulic Performance of Compact Fin-and-Tube Heat Exchangers

NASA Astrophysics Data System (ADS)

Moorthy, P.; Oumer, A. N.; Ishak, M.

2018-03-01

The aim of this paper is to investigate the effect of fin shapes on the performance of compact finned flat tube heat exchangers. Three types of fin shapes namely plain, wavy, and rectangular grooved fins attached to three by three arrays of flat tube banks were considered. Moreover, the tubes were deployed in in-line and staggered arrangements. In addition to the fin shapes, the air velocity and the tube inclination angles were varied and the thermal-hydraulic performance was analysed. On the other hand, the temperatures at the tube surfaces were kept constant to produce constant heat flux throughout the study. The results showed that as flowrate increases, the heat transfer increases, however, the friction factor decreases. Staggered arrangement produces higher heat transfer and friction factor than inline fin. Moreover, the rectangular fin is the best in terms of high heat transfer however the drawback of high friction factor leads the fin to have the least efficiency of all. On the other hand, plain fin had the least heat transfer performance however the highest efficiency was achieved. Therefore, plain fin should be used when efficiency is prioritized and rectangular fin when high heat transfer is desired.

Motor learning, retention and transfer after virtual-reality-based training in Parkinson's disease--effect of motor and cognitive demands of games: a longitudinal, controlled clinical study.

PubMed

dos Santos Mendes, Felipe Augusto; Pompeu, José Eduardo; Modenesi Lobo, Alexandra; Guedes da Silva, Keyte; Oliveira, Tatiana de Paula; Peterson Zomignani, Andrea; Pimentel Piemonte, Maria Elisa

2012-09-01

To evaluate the learning, retention and transfer of performance improvements after Nintendo Wii Fit™ training in patients with Parkinson's disease and healthy elderly people. Longitudinal, controlled clinical study. Sixteen patients with early-stage Parkinson's disease and 11 healthy elderly people. Warm-up exercises and Wii Fit training that involved training motor (shifts centre of gravity and step alternation) and cognitive skills. A follow-up evaluative Wii Fit session was held 60 days after the end of training. Participants performed a functional reach test before and after training as a measure of learning transfer. Learning and retention were determined based on the scores of 10 Wii Fit games over eight sessions. Transfer of learning was assessed after training using the functional reach test. Patients with Parkinson's disease showed no deficit in learning or retention on seven of the 10 games, despite showing poorer performance on five games compared with the healthy elderly group. Patients with Parkinson's disease showed marked learning deficits on three other games, independent of poorer initial performance. This deficit appears to be associated with cognitive demands of the games which require decision-making, response inhibition, divided attention and working memory. Finally, patients with Parkinson's disease were able to transfer motor ability trained on the games to a similar untrained task. The ability of patients with Parkinson's disease to learn, retain and transfer performance improvements after training on the Nintendo Wii Fit depends largely on the demands, particularly cognitive demands, of the games involved, reiterating the importance of game selection for rehabilitation purposes. Copyright © 2012 Chartered Society of Physiotherapy. Published by Elsevier Ltd. All rights reserved.

Performance tuning Weather Research and Forecasting (WRF) Goddard longwave radiative transfer scheme on Intel Xeon Phi

NASA Astrophysics Data System (ADS)

Mielikainen, Jarno; Huang, Bormin; Huang, Allen H.

2015-10-01

Next-generation mesoscale numerical weather prediction system, the Weather Research and Forecasting (WRF) model, is a designed for dual use for forecasting and research. WRF offers multiple physics options that can be combined in any way. One of the physics options is radiance computation. The major source for energy for the earth's climate is solar radiation. Thus, it is imperative to accurately model horizontal and vertical distribution of the heating. Goddard solar radiative transfer model includes the absorption duo to water vapor,ozone, ozygen, carbon dioxide, clouds and aerosols. The model computes the interactions among the absorption and scattering by clouds, aerosols, molecules and surface. Finally, fluxes are integrated over the entire longwave spectrum.In this paper, we present our results of optimizing the Goddard longwave radiative transfer scheme on Intel Many Integrated Core Architecture (MIC) hardware. The Intel Xeon Phi coprocessor is the first product based on Intel MIC architecture, and it consists of up to 61 cores connected by a high performance on-die bidirectional interconnect. The coprocessor supports all important Intel development tools. Thus, the development environment is familiar one to a vast number of CPU developers. Although, getting a maximum performance out of MICs will require using some novel optimization techniques. Those optimization techniques are discusses in this paper. The optimizations improved the performance of the original Goddard longwave radiative transfer scheme on Xeon Phi 7120P by a factor of 2.2x. Furthermore, the same optimizations improved the performance of the Goddard longwave radiative transfer scheme on a dual socket configuration of eight core Intel Xeon E5-2670 CPUs by a factor of 2.1x compared to the original Goddard longwave radiative transfer scheme code.

Transfer of Complex Skill Learning from Virtual to Real Rowing

PubMed Central

Rauter, Georg; Sigrist, Roland; Koch, Claudio; Crivelli, Francesco; van Raai, Mark; Riener, Robert; Wolf, Peter

2013-01-01

Simulators are commonly used to train complex tasks. In particular, simulators are applied to train dangerous tasks, to save costs, and to investigate the impact of different factors on task performance. However, in most cases, the transfer of simulator training to the real task has not been investigated. Without a proof for successful skill transfer, simulators might not be helpful at all or even counter-productive for learning the real task. In this paper, the skill transfer of complex technical aspects trained on a scull rowing simulator to sculling on water was investigated. We assume if a simulator provides high fidelity rendering of the interactions with the environment even without augmented feedback, training on such a realistic simulator would allow similar skill gains as training in the real environment. These learned skills were expected to transfer to the real environment. Two groups of four recreational rowers participated. One group trained on water, the other group trained on a simulator. Within two weeks, both groups performed four training sessions with the same licensed rowing trainer. The development in performance was assessed by quantitative biomechanical performance measures and by a qualitative video evaluation of an independent, blinded trainer. In general, both groups could improve their performance on water. The used biomechanical measures seem to allow only a limited insight into the rowers' development, while the independent trainer could also rate the rowers' overall impression. The simulator quality and naturalism was confirmed by the participants in a questionnaire. In conclusion, realistic simulator training fostered skill gains to a similar extent as training in the real environment and enabled skill transfer to the real environment. In combination with augmented feedback, simulator training can be further exploited to foster motor learning even to a higher extent, which is subject to future work. PMID:24376518

Advanced crew procedures development techniques

NASA Technical Reports Server (NTRS)

Arbet, J. D.; Benbow, R. L.; Mangiaracina, A. A.; Mcgavern, J. L.; Spangler, M. C.; Tatum, I. C.

1975-01-01

The development of an operational computer program, the Procedures and Performance Program (PPP), is reported which provides a procedures recording and crew/vehicle performance monitoring capability. The PPP provides real time CRT displays and postrun hardcopy of procedures, difference procedures, performance, performance evaluation, and training script/training status data. During post-run, the program is designed to support evaluation through the reconstruction of displays to any point in time. A permanent record of the simulation exercise can be obtained via hardcopy output of the display data, and via magnetic tape transfer to the Generalized Documentation Processor (GDP). Reference procedures data may be transferred from the GDP to the PPP.

EFFECTIVENESS OF A COMPREHENSIVE MENTAL SKILLS CURRICULUM IN ENHANCING SURGICAL PERFORMANCE: RESULTS OF A RANDOMIZED CONTROLLED TRIAL

PubMed Central

Stefanidis, Dimitrios; Anton, Nicholas E; Howley, Lisa D; Bean, Eric; Yurco, Ashley; Pimentel, Manuel E; Davis, Cameron K

2016-01-01

Introduction We hypothesized that the implementation of a novel mental skills curriculum (MSC) during laparoscopic simulator training would improve mental skills and performance, and decrease stress. Methods Sixty volunteer novices were randomized into intervention and control groups. All participants received FLS training while the intervention group also participated in the MSC. Skill transfer and retention were assessed on a live porcine model after training and 2 months later, respectively. Performance was assessed using the Test of Performance Strategies-2 (TOPS-2) for mental skills, FLS metrics for laparoscopic performance, and the State Trait Anxiety Inventory (STAI-6) and heart rate (HR) for stress. Results Fifty-five participants (92%) completed training and the transfer test, and 46 (77%) the retention test. There were no significant differences between groups at baseline. Compared to controls the intervention group significantly improved their mental skill use, demonstrated higher laparoscopic skill improvement during retention, and reported less stress during the transfer test. Conclusions The MSC implemented in this study effectively enhanced participants’ mental skill use, reduced cognitive stress in the operating room with a small impact on laparoscopic performance. PMID:27908500

Transfer in motion perceptual learning depends on the difficulty of the training task.

PubMed

Wang, Xiaoxiao; Zhou, Yifeng; Liu, Zili

2013-06-07

One hypothesis in visual perceptual learning is that the amount of transfer depends on the difficulty of the training and transfer tasks (Ahissar & Hochstein, 1997; Liu, 1995, 1999). Jeter, Dosher, Petrov, and Lu (2009), using an orientation discrimination task, challenged this hypothesis by arguing that the amount of transfer depends only on the transfer task but not on the training task. Here we show in a motion direction discrimination task that the amount of transfer indeed depends on the difficulty of the training task. Specifically, participants were first trained with either 4° or 8° direction discrimination along one average direction. Their transfer performance was then tested along an average direction 90° away from the trained direction. A variety of transfer measures consistently demonstrated that transfer performance depended on whether the participants were trained on 4° or 8° directional difference. The results contradicted the prediction that transfer was independent of the training task difficulty.

School Closure as a Strategy to Remedy Low Performance

ERIC Educational Resources Information Center

Sunderman, Gail L.; Coghlan, Erin; Mintrop, Rick

2017-01-01

This brief investigates whether closing schools and transferring students for the purpose of remedying low performance is an option educational decision makers should pursue. The logic of closing schools in response to low student performance goes like this: By closing low-performing schools and sending students to better-performing ones, student…

Prolonged training does not result in a greater extent of interlimb transfer following visuomotor adaptation.

PubMed

Lei, Yuming; Wang, Jinsung

2014-11-01

Learning a visumotor adaptation task with one arm typically facilitates subsequent performance with the other. The extent of transfer across the arms, however, is generally much smaller than that across different conditions within the same arm. This may be attributed to a possibility that intralimb transfer involves both algorithmic and instance-reliant learning, whereas interlimb transfer only involves algorithmic learning. Here, we investigated whether prolonged training with one arm could facilitate subsequent performance with the other arm to a greater extent, by examining the effect of varying lengths of practice trials on the extent of interlimb transfer. We had 18 subjects adapt to a 30° visuomotor rotation with the left arm first (training), then with the right arm (transfer). During the training session, the subjects reached toward multiple targets for 160, 320 or 400 trials; during the transfer session, all subjects performed the same task for 160 trials. Our results revealed substantial initial transfer from the left to the right arm in all three conditions. However, neither the amount of initial transfer nor the rate of adaptation during the transfer session was significantly different across the conditions, indicating that the extent of transfer was similar regardless of the length of initial training. Our findings suggest that interlimb transfer of visuomotor adaptation may only occur through algorithmic learning, which is effector independent, and that prolonged training may only have beneficial effects when instance-reliant learning, which is effector dependent, is also involved in the learning process. Copyright © 2014 Elsevier Inc. All rights reserved.

Transfer-Student Performance in Upper-Division Chemistry Courses: Implications for Curricular Reform and Alignment

ERIC Educational Resources Information Center

Whitfield, Mary

2005-01-01

Using a statewide database of student records, the grades of students enrolled in organic chemistry and biochemistry at a large state university were analyzed to determine if there was a difference in performance between community college transfers and "native" students. Although only small differences were found for the organic chemistry…

Analogical Transfer: Are There Performance Differences among High-Ability Students?

ERIC Educational Resources Information Center

McVey, Mary D.

This study investigated the role of problem structure and metacognitive control in the analogical transfer of performance of 40 13- and 14-year-old gifted and highly gifted math students. Average and above average 16-, 17-, and 18-year-olds served as comparison groups. Students were given three algebra problems with solutions, followed by two…

A Model for the Transfer of Perceptual-Motor Skill Learning in Human Behaviors

ERIC Educational Resources Information Center

Rosalie, Simon M.; Muller, Sean

2012-01-01

This paper presents a preliminary model that outlines the mechanisms underlying the transfer of perceptual-motor skill learning in sport and everyday tasks. Perceptual-motor behavior is motivated by performance demands and evolves over time to increase the probability of success through adaptation. Performance demands at the time of an event…

Merced

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hedstrom, Gerald; Beck, Bret; Mattoon, Caleb

2016-10-01

Merced performs a multi-dimensional integral tl generate so-called 'transfer matrices' for use in deterministic radiation transport applications. It produces transfer matrices on the user-defind energy grid. The angular dependence of outgoing products is captured in a Legendre expansion, up to a user-specified maximun Legendre order. Merced calculations can use multi-threading for enhanced performance on a single compute node.

Effects of Strategy Instruction on the Learning, Use, and Vertical Transfer of Strategies.

ERIC Educational Resources Information Center

Finley, Fred N.; Smith, Edward L.

1980-01-01

Compares group differences in strategy learning, use, and transfer to a more complex task for two groups of elementary students (N=48). Asked to perform three tasks in classifying igneous rocks, the groups differed in whether they received advice on the use of a specific strategy for performing each task. (CS)

Maternal Transfer of Vitamin C in Channel Catfish (Ictalurus Punctatus) Effects Reproduction and Progeny Performance

USDA-ARS?s Scientific Manuscript database

Two routes of maternal transfer of vitamin C in channel catfish female broodfish prior to spawning were explored as a strategy to incorporate the vitamin to determine its effect on reproduction and subsequent performance of the progeny. Accumulation of vitamin C was higher (p<0.05) in ovarian tissu...

Heat-Energy Analysis for Solar Receivers

NASA Technical Reports Server (NTRS)

Lansing, F. L.

1982-01-01

Heat-energy analysis program (HEAP) solves general heat-transfer problems, with some specific features that are "custom made" for analyzing solar receivers. Can be utilized not only to predict receiver performance under varying solar flux, ambient temperature and local heat-transfer rates but also to detect locations of hotspots and metallurgical difficulties and to predict performance sensitivity of neighboring component parameters.

Transfer Incentives for High-Performing Teachers: Final Results from a Multisite Randomized Experiment. NCEE 2014-4004

ERIC Educational Resources Information Center

Glazerman, Steven; Protik, Ali; Teh, Bing-ru; Bruch, Julie; Max, Jeffrey

2013-01-01

One way to improve struggling schools' access to effective teachers is to use selective transfer incentives. Such incentives offer bonuses for the highest-performing teachers to move into schools serving the most disadvantaged students. In this report, we provide evidence from a randomized experiment that tested whether such a policy intervention…

The Relationship between Student Transfers and District Academic Performance: Accounting for Feedback Effects

ERIC Educational Resources Information Center

Welsch, David M.; Zimmer, David M.

2015-01-01

This paper draws attention to a subtle, but concerning, empirical challenge common in panel data models that seek to estimate the relationship between student transfers and district academic performance. Specifically, if such models have a dynamic element, and if the estimator controls for unobserved traits by including district-level effects,…

A SUPPLEMENTAL GUIDANCE MANUAL BASED ON INSTITUTIONAL REASEARCH.

ERIC Educational Resources Information Center

NIELSEN, MARJORIE L.

THE GUIDANCE MANUAL HAS BEEN ORGANIZED TO PROVIDE A STATISTICAL BASIS FOR ANALYZING (1) THE NONSELECTIVE ADMISSION POLICY, (2) THE PERFORMANCE OF NATIVE, EVERETT JUNIOR COLLEGE STUDENTS WHO TRANSFER TO 4-YEAR COLLEGES, (3) THE PERFORMANCE OF TRANSFER STUDENTS TO THE JUNIOR COLLEGE WHO LATER ENROLL AT A 4-YEAR COLLEGE, (4) THE ESTABLISHMENT OF THE…

Test Scores, Dropout Rates, and Transfer Rates as Alternative Indicators of High School Performance

ERIC Educational Resources Information Center

Rumberger, Russell W.; Palardy, Gregory J.

2005-01-01

This study investigated the relationships among several different indicators of high school performance: test scores, dropout rates, transfer rates, and attrition rates. Hierarchical linear models were used to analyze panel data from a sample of 14,199 students who took part in the National Education Longitudinal Survey of 1988. The results…

Transfer and development length of 15.2 mm (0.6 in.) diameter prestressing strand in high performance concrete : results of the Hoblitzell-Buckner beam tests

DOT National Transportation Integrated Search

1995-06-01

This study examines the transfer and development length of 15.2 mm (0.6 in.) diameter prestressing strand in high performance (high strength) concrete. Two 1067 mm (42.0 in.) deep rectangular beams, commonly called the Hoblitzell-Buckner beams, each ...

Role of fin material and nanofluid in performance enhancement of automobile radiator

NASA Astrophysics Data System (ADS)

Jadar, Raju; Shashishekar, K. S.; Channa Keshava Naik, N.

2018-04-01

An effective cooling system can avoid engine and its components from overheating and helps in achieving optimum engine performance. This work deals with the fabrication and performance evaluation of an automobile radiator with i) Aluminum fins and ii) Al-MWCNT fins using 0.1 w/v% f-MWCNT nanofluid. F-MWCNT nanoparticles in the base fluid improves the rate of heat transfer in an automobile radiator integrated with Al-MWCNT fins. The enhancement of heat transfer mainly depends on the quantity of F-MWCNT nanoparticles added to the host fluid. During the study it was found that at a low weight by volume concentration of nanofluid the heat transfer enhancement of 8% was achieved using Al-MWCNT fins compared to base fluid.

Targeting latent function: Encouraging effective encoding for successful memory training and transfer

PubMed Central

Lustig, Cindy; Flegal, Kristin E.

2009-01-01

Cognitive training programs for older adults often result in improvements at the group level. However, there are typically large age and individual differences in the size of training benefits. These differences may be related to the degree to which participants implement the processes targeted by the training program. To test this possibility, we tested older adults in a memory-training procedure either under specific strategy instructions designed to encourage semantic, integrative encoding, or in a condition that encouraged time and attention to encoding but allowed participants to choose their own strategy. Both conditions improved the performance of old-old adults relative to an earlier study (Bissig & Lustig, 2007) and reduced self-reports of everyday memory errors. Performance in the strategy-instruction group was related to pre-existing ability, performance in the strategy-choice group was not. The strategy-choice group performed better on a laboratory transfer test of recognition memory, and training performance was correlated with reduced everyday memory errors. Training programs that target latent but inefficiently-used abilities while allowing flexibility in bringing those abilities to bear may best promote effective training and transfer. PMID:19140647

Quantifying transfer after perceptual-motor sequence learning: how inflexible is implicit learning?

PubMed

Sanchez, Daniel J; Yarnik, Eric N; Reber, Paul J

2015-03-01

Studies of implicit perceptual-motor sequence learning have often shown learning to be inflexibly tied to the training conditions during learning. Since sequence learning is seen as a model task of skill acquisition, limits on the ability to transfer knowledge from the training context to a performance context indicates important constraints on skill learning approaches. Lack of transfer across contexts has been demonstrated by showing that when task elements are changed following training, this leads to a disruption in performance. These results have typically been taken as suggesting that the sequence knowledge relies on integrated representations across task elements (Abrahamse, Jiménez, Verwey, & Clegg, Psychon Bull Rev 17:603-623, 2010a). Using a relatively new sequence learning task, serial interception sequence learning, three experiments are reported that quantify this magnitude of performance disruption after selectively manipulating individual aspects of motor performance or perceptual information. In Experiment 1, selective disruption of the timing or order of sequential actions was examined using a novel response manipulandum that allowed for separate analysis of these two motor response components. In Experiments 2 and 3, transfer was examined after selective disruption of perceptual information that left the motor response sequence intact. All three experiments provided quantifiable estimates of partial transfer to novel contexts that suggest some level of information integration across task elements. However, the ability to identify quantifiable levels of successful transfer indicates that integration is not all-or-none and that measurement sensitivity is a key in understanding sequence knowledge representations.

[Non vascularized toe phalangeal transfers for symbrachydactyly. Active range of motion without joint reconstruction].

PubMed

Leca, J-B; Auquit Auckbur, I; Bachy, B; Milliez, P-Y

2008-12-01

Symbrachydactyly is a rare congenital malformation of the hand and its treatment is controversial. Non vascularized toe phalangeal transfers have been used for management of short digits for three children. Six phalanges have been harvested complete with their periosteum. No joint reconstruction has been performed and all children have undergone surgery at a young age. Four of six digits involved have an active range of motion (range 30 to 105 degrees ). All authors who have reported active range of motion of toe phalangeal transfers have performed joint reconstruction. Here, we report obtaining active range of motion of phalangeal transfers without necessity of joint reconstruction.

Increasing efficiency in production of cloned piglets.

PubMed

Callesen, Henrik; Liu, Ying; Pedersen, Hanne S; Li, Rong; Schmidt, Mette

2014-12-01

The low efficiency in obtaining piglets after production of cloned embryos was challenged in two steps-first by performing in vitro culture for 5-6 days after cloning to obtain later-stage embryos for more precise selection for transfer, and second by reducing the number of embryos transferred per recipient sow. The data set consisted of combined results from a 4-year period where cloning was performed to produce piglets that were transgenic for important human diseases. For this, different transgenes and cell types were used, and the cloning work was performed by several persons using oocytes from different pig breeds, but following a standardized and optimized protocol. Results showed that in vitro culture is possible with a relatively stable rate of transferable embryos around 41% and a pregnancy rate around 90%. Furthermore, a reduction from around 80 embryos to 40 embryos transferred per recipient was possible without changing the efficiency of around 14% (piglets born out of embryos transferred). It was concluded that this approach can increase the efficiency in obtaining piglets by means of in vitro culture and selection of high-quality embryos with subsequent transfer into more recipients. Such changes can also reduce the need for personnel, time, and material when working with this technology.

Data transfer nodes and demonstration of 100-400 Gbps wide area throughput using the Caltech SDN testbed

NASA Astrophysics Data System (ADS)

Mughal, A.; Newman, H.

2017-10-01

We review and demonstrate the design of efficient data transfer nodes (DTNs), from the perspective of the highest throughput over both local and wide area networks, as well as the highest performance per unit cost. A careful system-level design is required for the hardware, firmware, OS and software components. Furthermore, additional tuning of these components, and the identification and elimination of any remaining bottlenecks is needed once the system is assembled and commissioned, in order to obtain optimal performance. For high throughput data transfers, specialized software is used to overcome the traditional limits in performance caused by the OS, file system, file structures used, etc. Concretely, we will discuss and present the latest results using Fast Data Transfer (FDT), developed by Caltech. We present and discuss the design choices for three generations of Caltech DTNs. Their transfer capabilities range from 40 Gbps to 400 Gbps. Disk throughput is still the biggest challenge in the current generation of available hardware. However, new NVME drives combined with RDMA and a new NVME network fabric are expected to improve the overall data-transfer throughput and simultaneously reduce the CPU load on the end nodes.

Working memory plasticity in old age: practice gain, transfer, and maintenance.

PubMed

Li, Shu-Chen; Schmiedek, Florian; Huxhold, Oliver; Röcke, Christina; Smith, Jacqui; Lindenberger, Ulman

2008-12-01

Adult age differences in cognitive plasticity have been studied less often in working memory than in episodic memory. The authors investigated the effects of extensive working memory practice on performance improvement, transfer, and short-term maintenance of practice gains and transfer effects. Adults age 20-30 years and 70-80 years practiced a spatial working memory task with 2 levels of processing demands across 45 days for about 15 min per day. In both age groups and relative to age-matched, no-contact control groups, we found (a) substantial performance gains on the practiced task, (b) near transfer to a more demanding spatial n-back task and to numerical n-back tasks, and (c) 3-month maintenance of practice gains and near transfer effects, with decrements relative to postpractice performance among older but not younger adults. No evidence was found for far transfer to complex span tasks. The authors discuss neuronal mechanisms underlying adult age differences and similarities in patterns of plasticity and conclude that the potential of deliberate working memory practice as a tool for improving cognition in old age merits further exploration. Copyright (c) 2009 APA, all rights reserved.

Gas sensors boosted by two-dimensional h-BN enabled transfer on thin substrate foils: towards wearable and portable applications.

PubMed

Ayari, Taha; Bishop, Chris; Jordan, Matthew B; Sundaram, Suresh; Li, Xin; Alam, Saiful; ElGmili, Youssef; Patriarche, Gilles; Voss, Paul L; Salvestrini, Jean Paul; Ougazzaden, Abdallah

2017-11-09

The transfer of GaN based gas sensors to foreign substrates provides a pathway to enhance sensor performance, lower the cost and extend the applications to wearable, mobile or disposable systems. The main keys to unlocking this pathway is to grow and fabricate the sensors on large h-BN surface and to transfer them to the flexible substrate without any degradation of the performances. In this work, we develop a new generation of AlGaN/GaN gas sensors with boosted performances on a low cost flexible substrate. We fabricate 2-inch wafer scale AlGaN/GaN gas sensors on sacrificial two-dimensional (2D) nano-layered h-BN without any delamination or cracks and subsequently transfer sensors to an acrylic surface on metallic foil. This technique results in a modification of relevant device properties, leading to a doubling of the sensitivity to NO 2 gas and a response time that is more than 6 times faster than before transfer. This new approach for GaN-based sensor design opens new avenues for sensor improvement via transfer to more suitable substrates, and is promising for next-generation wearable and portable opto-electronic devices.

Using transfer learning to detect galaxy mergers

NASA Astrophysics Data System (ADS)

Ackermann, Sandro; Schawinksi, Kevin; Zhang, Ce; Weigel, Anna K.; Turp, M. Dennis

2018-05-01

We investigate the use of deep convolutional neural networks (deep CNNs) for automatic visual detection of galaxy mergers. Moreover, we investigate the use of transfer learning in conjunction with CNNs, by retraining networks first trained on pictures of everyday objects. We test the hypothesis that transfer learning is useful for improving classification performance for small training sets. This would make transfer learning useful for finding rare objects in astronomical imaging datasets. We find that these deep learning methods perform significantly better than current state-of-the-art merger detection methods based on nonparametric systems like CAS and GM20. Our method is end-to-end and robust to image noise and distortions; it can be applied directly without image preprocessing. We also find that transfer learning can act as a regulariser in some cases, leading to better overall classification accuracy (p = 0.02). Transfer learning on our full training set leads to a lowered error rate from 0.0381 down to 0.0321, a relative improvement of 15%. Finally, we perform a basic sanity-check by creating a merger sample with our method, and comparing with an already existing, manually created merger catalogue in terms of colour-mass distribution and stellar mass function.

Transfer learning improves supervised image segmentation across imaging protocols.

PubMed

van Opbroek, Annegreet; Ikram, M Arfan; Vernooij, Meike W; de Bruijne, Marleen

2015-05-01

The variation between images obtained with different scanners or different imaging protocols presents a major challenge in automatic segmentation of biomedical images. This variation especially hampers the application of otherwise successful supervised-learning techniques which, in order to perform well, often require a large amount of labeled training data that is exactly representative of the target data. We therefore propose to use transfer learning for image segmentation. Transfer-learning techniques can cope with differences in distributions between training and target data, and therefore may improve performance over supervised learning for segmentation across scanners and scan protocols. We present four transfer classifiers that can train a classification scheme with only a small amount of representative training data, in addition to a larger amount of other training data with slightly different characteristics. The performance of the four transfer classifiers was compared to that of standard supervised classification on two magnetic resonance imaging brain-segmentation tasks with multi-site data: white matter, gray matter, and cerebrospinal fluid segmentation; and white-matter-/MS-lesion segmentation. The experiments showed that when there is only a small amount of representative training data available, transfer learning can greatly outperform common supervised-learning approaches, minimizing classification errors by up to 60%.

Inertial Sensor Based Analysis of Lie-to-Stand Transfers in Younger and Older Adults

PubMed Central

Schwickert, Lars; Boos, Ronald; Klenk, Jochen; Bourke, Alan; Becker, Clemens; Zijlstra, Wiebren

2016-01-01

Many older adults lack the capacity to stand up again after a fall. Therefore, to analyse falls it is relevant to understand recovery patterns, including successful and failed attempts to get up from the floor in general. This study analysed different kinematic features of standing up from the floor. We used inertial sensors to describe the kinematics of lie-to-stand transfer patterns of younger and healthy older adults. Fourteen younger (20–50 years of age, 50% men) and 10 healthy older community dwellers (≥60 years; 50% men) conducted four lie-to-stand transfers from different initial lying postures. The analysed temporal, kinematic, and elliptic fitting complexity measures of transfer performance were significantly different between younger and older subjects (i.e., transfer duration, angular velocity (RMS), maximum vertical acceleration, maximum vertical velocity, smoothness, fluency, ellipse width, angle between ellipses). These results show the feasibility and potential of analysing kinematic features to describe the lie-to-stand transfer performance, to help design interventions and detection approaches to prevent long lies after falls. It is possible to describe age-related differences in lie-to-stand transfer performance using inertial sensors. The kinematic analysis remains to be tested on patterns after real-world falls. PMID:27529249

Parameter transferability within homogeneous regions and comparisons with predictions from a priori parameters in the eastern United States

NASA Astrophysics Data System (ADS)

Chouaib, Wafa; Alila, Younes; Caldwell, Peter V.

2018-05-01

The need for predictions of flow time-series persists at ungauged catchments, motivating the research goals of our study. By means of the Sacramento model, this paper explores the use of parameter transfer within homogeneous regions of similar climate and flow characteristics and makes comparisons with predictions from a priori parameters. We assessed the performance using the Nash-Sutcliffe (NS), bias, mean monthly hydrograph and flow duration curve (FDC). The study was conducted on a large dataset of 73 catchments within the eastern US. Two approaches to the parameter transferability were developed and evaluated; (i) the within homogeneous region parameter transfer using one donor catchment specific to each region, (ii) the parameter transfer disregarding the geographical limits of homogeneous regions, where one donor catchment was common to all regions. Comparisons between both parameter transfers enabled to assess the gain in performance from the parameter regionalization and its respective constraints and limitations. The parameter transfer within homogeneous regions outperformed the a priori parameters and led to a decrease in bias and increase in efficiency reaching a median NS of 0.77 and a NS of 0.85 at individual catchments. The use of FDC revealed the effect of bias on the inaccuracy of prediction from parameter transfer. In one specific region, of mountainous and forested catchments, the prediction accuracy of the parameter transfer was less satisfactory and equivalent to a priori parameters. In this region, the parameter transfer from the outsider catchment provided the best performance; less-biased with smaller uncertainty in medium flow percentiles (40%-60%). The large disparity of energy conditions explained the lack of performance from parameter transfer in this region. Besides, the subsurface stormflow is predominant and there is a likelihood of lateral preferential flow, which according to its specific properties further explained the reduced efficiency. Testing the parameter transferability using criteria of similar climate and flow characteristics at ungauged catchments and comparisons with predictions from a priori parameters are a novelty. The ultimate limitations of both approaches are recognized and recommendations are made for future research.

Experimental study of heat transfer enhancement due to the surface vibrations in a flexible double pipe heat exchanger

NASA Astrophysics Data System (ADS)

Hosseinian, A.; Meghdadi Isfahani, A. H.

2018-04-01

In this study, the heat transfer enhancement due to the surface vibration for a double pipe heat exchanger, made of PVDF, is investigated. In order to create forced vibrations (3-9 m/s2, 100 Hz) on the outer surface of the heat exchanger electro-dynamic vibrators are used. Experiments were performed at inner Reynolds numbers ranging from 2533 to 9960. The effects of volume flow rate and temperature on heat transfer performance are evaluated. Results demonstrated that heat transfer coefficient increases by increasing vibration level and mass flow rate. The most increase in heat transfer coefficient is 97% which is obtained for the highest vibration level (9 m/s2) in the experiment range.

Timed Transfer : An Evaluation of Its Structure, Performance and Cost

DOT National Transportation Integrated Search

1983-08-01

Timed transfer is a transit operating strategy in which vehicles from different routes are routed and scheduled to meet simultaneously at common stops to facilitate no-wait or minimum-wait passenger transfers. Timed transfers are being used primarily...

Evaluating the transport layer of the ALFA framework for the Intel® Xeon Phi™ Coprocessor

NASA Astrophysics Data System (ADS)

Santogidis, Aram; Hirstius, Andreas; Lalis, Spyros

2015-12-01

The ALFA framework supports the software development of major High Energy Physics experiments. As part of our research effort to optimize the transport layer of ALFA, we focus on profiling its data transfer performance for inter-node communication on the Intel Xeon Phi Coprocessor. In this article we present the collected performance measurements with the related analysis of the results. The optimization opportunities that are discovered, help us to formulate the future plans of enabling high performance data transfer for ALFA on the Intel Xeon Phi architecture.

Orbit Transfer Vehicle (OTV) engine phase A study

NASA Technical Reports Server (NTRS)

Mellish, J. A.

1978-01-01

Requirements for the orbit transfer vehicle engine were examined. Engine performance/weight sensitivities, the effect of a service life of 300 start/shutdown cycles between overalls on the maximum engine operating pressure, and the sensitivity of the engine design point (i.e., thrust chamber pressure and nozzle area ratio) to the performance requirements specified are among the factors studied. Preliminary engine systems analyses were conducted on the stage combustion, expander, and gas generator engine cycles. Hydrogen and oxygen pump discharge pressure requirements are shown for various engine cycles. Performance of the engine cycles is compared.

Influence of Oil on Refrigerant Evaporator Performance

NASA Astrophysics Data System (ADS)

Kim, Jong-Soo; Nagata, Karsuya; Katsuta, Masafumi; Tomosugi, Hiroyuki; Kikuchi, Kouichiro; Horichi, Toshiaki

In vapor compression refrigeration system using oil-lubricated compressors, some amount of oil is always circulated through the system. Oil circulation can have a significant influence on the evaporator performance of automotive air conditioner which is especially required to cool quickly the car interior after a period standing in the sun. An experimental investigation was carried out an electrically heated horizontal tube to measure local heat transfer coefficients for various flow rates and heat fluxes during forced convection boiling of pure refrigerant R12 and refrigerant-oil mixtures (0-11% oil concentration by weight) and the results were compared with oil free performance. Local heat transfer coefficients increased at the region of low vapor quality by the addition of oil. On the other hand, because the oil-rich liquid film was formed on the heat transfer surface, heat transfer coefficients gradually decreased as the vapor quality became higher. Average heat transfer coefficient reached a maximum at about 4% oil concentration and this trend agreed well with the results of Green and Furse. Previous correlations, using the properties of the refrigerant-oil mixture, could not predict satisfactorily the local heat transfer coefficients data. New correlation modified by oil concentration factor was developed for predicting the corresponding heat transfer coefficient for refrigerant-oil mixture convection boiling. The maximum percent deviation between predicted and measured heat transfer coefficient was within ±30%.

Carbon monoxide mass transfer for syngas fermentation in a stirred tank reactor with dual impeller configurations.

PubMed

Ungerman, Andrew J; Heindel, Theodore J

2007-01-01

This study compares the power demand and gas-liquid volumetric mass transfer coefficient, kLa, in a stirred tank reactor (STR) (T = 0.211 m) using different impeller designs and schemes in a carbon monoxide-water system, which is applicable to synthesis gas (syngas) fermentation. Eleven different impeller schemes were tested over a range of operating conditions typically associated with the "after large cavity" region (ALC) of a Rushton-type turbine (D/T = 0.35). It is found that the dual Rushton-type impeller scheme exhibits the highest volumetric mass transfer rates for all operating conditions; however, it also displays the lowest mass transfer performance (defined as the volumetric mass transfer coefficient per unit power input) for all conditions due to its high power consumption. Dual impeller schemes with an axial flow impeller as the top impeller show improved mass transfer rates without dramatic increases in power draw. At high gas flow rates, dual impeller schemes with a lower concave impeller have kLa values similar to those of the Rushton-type dual impeller schemes but show improved mass transfer performance. It is believed that the mass transfer performance can be further enhanced for the bottom concave impeller schemes by operating at conditions beyond the ALC region defined for Rushton-type impellers because the concave impeller can handle higher gas flow rates prior to flooding.

Integration Of Heat Transfer Coefficient In Glass Forming Modeling With Special Interface Element

DOE Office of Scientific and Technical Information (OSTI.GOV)

Moreau, P.; Gregoire, S.; Lochegnies, D.

2007-05-17

Numerical modeling of the glass forming processes requires the accurate knowledge of the heat exchange between the glass and the forming tools. A laboratory testing is developed to determine the evolution of the heat transfer coefficient in different glass/mould contact conditions (contact pressure, temperature, lubrication...). In this paper, trials are performed to determine heat transfer coefficient evolutions in experimental conditions close to the industrial blow-and-blow process conditions. In parallel of this work, a special interface element is implemented in a commercial Finite Element code in order to deal with heat transfer between glass and mould for non-meshing meshes and evolutivemore » contact. This special interface element, implemented by using user subroutines, permits to introduce the previous heat transfer coefficient evolutions in the numerical modelings at the glass/mould interface in function of the local temperatures, contact pressures, contact time and kind of lubrication. The blow-and-blow forming simulation of a perfume bottle is finally performed to assess the special interface element performance.« less

Measuring the Effectiveness of Transfer of Learning Constructs and Intent to Transfer in a Simulation-Based Leadership Training Program

ERIC Educational Resources Information Center

Hix, Joanne W.

2013-01-01

The purpose of business training programs is to improve performance, which improved performance changes leadership behaviors based on the knowledge, skills, and abilities (KSAs) learned in training. One of the most common criticisms of leadership training is the tendency to focus on teaching theory but not on applying theory into practice, that…

Effects of Computer Support, Collaboration, and Time Lag on Performance Self-Efficacy and Transfer of Training: A Longitudinal Meta-Analysis

ERIC Educational Resources Information Center

Gegenfurtner, Andreas; Veermans, Koen; Vauras, Marja

2013-01-01

This meta-analysis (29 studies, k = 33, N = 4158) examined the longitudinal development of the relationship between performance self-efficacy and transfer before and after training. A specific focus was on training programs that afforded varying degrees of computer-supported collaborative learning (CSCL). Consistent with social cognitive theory,…

Understanding the Mind or Predicting Signal-Dependent Action? Performance of Children with and without Autism on Analogues of the False-Belief Task

ERIC Educational Resources Information Center

Bowler, Dermot M.; Briskman, Jackie; Gurvidi, Nicole; Fornells-Ambrojo, Miriam

2005-01-01

To evaluate the claim that correct performance on unexpected transfer false-belief tasks specifically involves mental-state understanding, two experiments were carried out with children with autism, intellectual disabilities, and typical development. In both experiments, children were given a standard unexpected transfer false-belief task and a…

Academic Performance, Persistence, and Degree Completion of Associate in Arts Degree Recipients Transferring to a Four-Year Multi-Campus Institution

ERIC Educational Resources Information Center

Reyes, Saul

2010-01-01

This study assessed if there were differences in the academic performance, persistence, and degree completion for Associate in Arts transfer students in selected majors who enrolled in the different campuses of a multi-campus university. This causal comparative study analyzed historical student enrollment data from a large, urban, public, research…

Transfer Incentives for High-Performing Teachers: Final Results from a Multisite Randomized Experiment. Executive Summary. NCEE 2014-4004

ERIC Educational Resources Information Center

Glazerman, Steven; Protik, Ali; Teh, Bing-ru; Bruch, Julie; Max, Jeffrey

2013-01-01

One way to improve struggling schools' access to effective teachers is to use selective transfer incentives. Such incentives offer bonuses for the highest-performing teachers to move into schools serving the most disadvantaged students. In this report, we provide evidence from a randomized experiment that tested whether such a policy intervention…

The Academic Performance of Piedmont Virginia Community College Transfer Students at the University of Virginia. Research Report 5-84.

ERIC Educational Resources Information Center

Doherty, Frank J.; Vaughan, George B.

A study was conducted to assess the academic performance of students who transferred from Piedmont Virginia Community College (PVCC) to the University of Virginia (UVA), using information on student application and acceptance rates, test scores, grade point averages (GPA's), and graduation rates. Data supplied by UVA on 291 students who…

The Relationship among Training Policy, Knowledge Transfer, and Performance Improvement: A Study of Private Sector Organizations in the Kingdom of Saudi Arabia

ERIC Educational Resources Information Center

Shafloot, Fayez M.

2012-01-01

The purpose of this study was to explore human resource (HR) managers' perceptions of training practices (i.e., needs assessment, trainee preparation, training program review, accountability, management support, knowledge transfer, and performance improvement) in Saudi private sector organizations. The research questions were: (1) How do HR…

Striatal volume predicts level of video game skill acquisition.

PubMed

Erickson, Kirk I; Boot, Walter R; Basak, Chandramallika; Neider, Mark B; Prakash, Ruchika S; Voss, Michelle W; Graybiel, Ann M; Simons, Daniel J; Fabiani, Monica; Gratton, Gabriele; Kramer, Arthur F

2010-11-01

Video game skills transfer to other tasks, but individual differences in performance and in learning and transfer rates make it difficult to identify the source of transfer benefits. We asked whether variability in initial acquisition and of improvement in performance on a demanding video game, the Space Fortress game, could be predicted by variations in the pretraining volume of either of 2 key brain regions implicated in learning and memory: the striatum, implicated in procedural learning and cognitive flexibility, and the hippocampus, implicated in declarative memory. We found that hippocampal volumes did not predict learning improvement but that striatal volumes did. Moreover, for the striatum, the volumes of the dorsal striatum predicted improvement in performance but the volumes of the ventral striatum did not. Both ventral and dorsal striatal volumes predicted early acquisition rates. Furthermore, this early-stage correlation between striatal volumes and learning held regardless of the cognitive flexibility demands of the game versions, whereas the predictive power of the dorsal striatal volumes held selectively for performance improvements in a game version emphasizing cognitive flexibility. These findings suggest a neuroanatomical basis for the superiority of training strategies that promote cognitive flexibility and transfer to untrained tasks.

Optimization of Dimples in Microchannel Heat Sink with Impinging Jets — Part A: Mathematical Model and the Influence of Dimple Radius

NASA Astrophysics Data System (ADS)

Ming, Tingzhen; Cai, Cunjin; Yang, Wei; Shen, Wenqing; Gan, Ting

2018-06-01

With increasing heat fluxes caused by electronic components, dimples have attracted wide attention by researchers and have been applied to microchannel heat sink in modern advanced cooling technologies. In this work, the combination of dimples, impinging jets and microchannel heat sink was proposed to improve the heat transfer performance on a cooling surface with a constant heat flux 500 W/cm2. A mathematical model was advanced for numerically analyzing the fluid flow and heat transfer characteristics of a microchannel heat sink with impinging jets and dimples (MHSIJD), and the velocity distribution, pressure drop, and thermal performance of MHSIJD were analyzed by varying the radii of dimples. The results showed that the combination of dimples and MHSIJ can achieve excellent heat transfer performance; for the MHSIJD model in this work, the maximum and average temperatures can be as low as 320 K and 305 K, respectively when mass flow rate is 30 g/s; when dimple radius is larger than 0.195 mm, both the heat transfer coefficient and the overall performance h/ΔP of MHSIJD are higher than those of MHSIJ.

The partial coherence modulation transfer function in testing lithography lens

NASA Astrophysics Data System (ADS)

Huang, Jiun-Woei

2018-03-01

Due to the lithography demanding high performance in projection of semiconductor mask to wafer, the lens has to be almost free in spherical and coma aberration, thus, in situ optical testing for diagnosis of lens performance has to be established to verify the performance and to provide the suggesting for further improvement of the lens, before the lens has been build and integrated with light source. The measurement of modulation transfer function of critical dimension (CD) is main performance parameter to evaluate the line width of semiconductor platform fabricating ability for the smallest line width of producing tiny integrated circuits. Although the modulation transfer function (MTF) has been popularly used to evaluation the optical system, but in lithography, the contrast of each line-pair is in one dimension or two dimensions, analytically, while the lens stand along in the test bench integrated with the light source coherent or near coherent for the small dimension near the optical diffraction limit, the MTF is not only contributed by the lens, also by illumination of platform. In the study, the partial coherence modulation transfer function (PCMTF) for testing a lithography lens is suggested by measuring MTF in the high spatial frequency of in situ lithography lens, blended with the illumination of partial and in coherent light source. PCMTF can be one of measurement to evaluate the imperfect lens of lithography lens for further improvement in lens performance.

Gene doping.

PubMed

Harridge, Stephen D R; Velloso, Cristiana P

2008-01-01

Gene doping is the misuse of gene therapy to enhance athletic performance. It has recently been recognised as a potential threat and subsequently been prohibited by the World Anti-Doping Agency. Despite concerns with safety and efficacy of gene therapy, the technology is progressing steadily. Many of the genes/proteins which are involved in determining key components of athletic performance have been identified. Naturally occurring mutations in humans as well as gene-transfer experiments in adult animals have shown that altered expression of these genes does indeed affect physical performance. For athletes, however, the gains in performance must be weighed against the health risks associated with the gene-transfer process, whereas the detection of such practices will provide new challenges for the anti-doping authorities.

WinSCP for Windows File Transfers | High-Performance Computing | NREL

Science.gov Websites

WinSCP for Windows File Transfers WinSCP for Windows File Transfers WinSCP for can used to securely transfer files between your local computer running Microsoft Windows and a remote computer running Linux

75 FR 13146 - Proposed Collection; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-18

... Office of Management and Budget for extension and approval. Rule 17Ad-10 requires registered transfer... for which it performs transfer agent functions, including the purchase, transfer and redemptions of securities. In addition, the rule also requires transfer agents that maintain securityholder records to...

Object recognition using deep convolutional neural networks with complete transfer and partial frozen layers

NASA Astrophysics Data System (ADS)

Kruithof, Maarten C.; Bouma, Henri; Fischer, Noëlle M.; Schutte, Klamer

2016-10-01

Object recognition is important to understand the content of video and allow flexible querying in a large number of cameras, especially for security applications. Recent benchmarks show that deep convolutional neural networks are excellent approaches for object recognition. This paper describes an approach of domain transfer, where features learned from a large annotated dataset are transferred to a target domain where less annotated examples are available as is typical for the security and defense domain. Many of these networks trained on natural images appear to learn features similar to Gabor filters and color blobs in the first layer. These first-layer features appear to be generic for many datasets and tasks while the last layer is specific. In this paper, we study the effect of copying all layers and fine-tuning a variable number. We performed an experiment with a Caffe-based network on 1000 ImageNet classes that are randomly divided in two equal subgroups for the transfer from one to the other. We copy all layers and vary the number of layers that is fine-tuned and the size of the target dataset. We performed additional experiments with the Keras platform on CIFAR-10 dataset to validate general applicability. We show with both platforms and both datasets that the accuracy on the target dataset improves when more target data is used. When the target dataset is large, it is beneficial to freeze only a few layers. For a large target dataset, the network without transfer learning performs better than the transfer network, especially if many layers are frozen. When the target dataset is small, it is beneficial to transfer (and freeze) many layers. For a small target dataset, the transfer network boosts generalization and it performs much better than the network without transfer learning. Learning time can be reduced by freezing many layers in a network.

Functional performance comparison between real and virtual tasks in older adults

PubMed Central

Bezerra, Ítalla Maria Pinheiro; Crocetta, Tânia Brusque; Massetti, Thais; da Silva, Talita Dias; Guarnieri, Regiani; Meira, Cassio de Miranda; Arab, Claudia; de Abreu, Luiz Carlos; de Araujo, Luciano Vieira; Monteiro, Carlos Bandeira de Mello

2018-01-01

Abstract Introduction: Ageing is usually accompanied by deterioration of physical abilities, such as muscular strength, sensory sensitivity, and functional capacity, making chronic diseases, and the well-being of older adults new challenges to global public health. Objective: The purpose of this study was to evaluate whether a task practiced in a virtual environment could promote better performance and enable transfer to the same task in a real environment. Method: The study evaluated 65 older adults of both genders, aged 60 to 82 years (M = 69.6, SD = 6.3). A timing coincident task was applied to measure the perceptual-motor ability to perform a motor response. The participants were divided into 2 groups: started in a real interface and started in a virtual interface. Results: All subjects improved their performance during the practice, but improvement was not observed for the real interface, as the participants were near maximum performance from the beginning of the task. However, there was no transfer of performance from the virtual to real environment or vice versa. Conclusions: The virtual environment was shown to provide improvement of performance with a short-term motor learning protocol in a timing coincident task. This result suggests that the practice of tasks in a virtual environment seems to be a promising tool for the assessment and training of healthy older adults, even though there was no transfer of performance to a real environment. Trial registration: ISRCTN02960165. Registered 8 November 2016. PMID:29369177

Determination of Local Experimental Heat-Transfer Coefficients on Combustion Side of an Ammonia-Oxygen Rocket

NASA Technical Reports Server (NTRS)

Liebert, Curt H.; Ehlers, Robert C.

1961-01-01

Local experimental heat-transfer coefficients were measured in the chamber and throat of a 2400-pound-thrust ammonia-oxygen rocket engine with a nominal chamber pressure of 600 pounds per square inch absolute. Three injector configurations were used. The rocket engine was run over a range of oxidant-fuel ratio and chamber pressure. The injector that achieved the best performance also produced the highest rates of heat flux at design conditions. The heat-transfer data from the best-performing injector agreed well with the simplified equation developed by Bartz at the throat region. A large spread of data was observed for the chamber. This spread was attributed generally to the variations of combustion processes. The spread was least evident, however, with the best-performing injector.

Collegial Activity Learning between Heterogeneous Sensors.

PubMed

Feuz, Kyle D; Cook, Diane J

2017-11-01

Activity recognition algorithms have matured and become more ubiquitous in recent years. However, these algorithms are typically customized for a particular sensor platform. In this paper we introduce PECO, a Personalized activity ECOsystem, that transfers learned activity information seamlessly between sensor platforms in real time so that any available sensor can continue to track activities without requiring its own extensive labeled training data. We introduce a multi-view transfer learning algorithm that facilitates this information handoff between sensor platforms and provide theoretical performance bounds for the algorithm. In addition, we empirically evaluate PECO using datasets that utilize heterogeneous sensor platforms to perform activity recognition. These results indicate that not only can activity recognition algorithms transfer important information to new sensor platforms, but any number of platforms can work together as colleagues to boost performance.

Base fluid in improving heat transfer for EV car battery

NASA Astrophysics Data System (ADS)

Bin-Abdun, Nazih A.; Razlan, Zuradzman M.; Shahriman, A. B.; Wan, Khairunizam; Hazry, D.; Ahmed, S. Faiz; Adnan, Nazrul H.; Heng, R.; Kamarudin, H.; Zunaidi, I.

2015-05-01

This study examined the effects of base fluid (as coolants) channeling inside the heat exchanger in the process of the increase in thermal conductivity between EV car battery and the heat exchanger. The analysis showed that secondary cooling system by means of water has advantages in improving the heat transfer process and reducing the electric power loss on the form of thermal energy from batteries. This leads to the increase in the efficiency of the EV car battery, hence also positively reflecting the performance of the EV car. The present work, analysis is performed to assess the design and use of heat exchanger in increasing the performance efficiency of the EV car battery. This provides a preface to the use this design for nano-fluids which increase and improve from heat transfer.

An Overview of High-performance Parallel Big Data transfers over multiple network channels with Transport Layer Security (TLS) and TLS plus Perfect Forward Secrecy (PFS)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fang, Chin; Corttrell, R. A.

This Technical Note provides an overview of high-performance parallel Big Data transfers with and without encryption for data in-transit over multiple network channels. It shows that with the parallel approach, it is feasible to carry out high-performance parallel "encrypted" Big Data transfers without serious impact to throughput. But other impacts, e.g. the energy-consumption part should be investigated. It also explains our rationales of using a statistics-based approach for gaining understanding from test results and for improving the system. The presentation is of high-level nature. Nevertheless, at the end we will pose some questions and identify potentially fruitful directions for futuremore » work.« less

Ultrasmooth Quantum Dot Micropatterns by a Facile Controllable Liquid-Transfer Approach: Low-Cost Fabrication of High-Performance QLED.

PubMed

Zhang, Min; Hu, Binbin; Meng, Lili; Bian, Ruixin; Wang, Siyuan; Wang, Yunjun; Liu, Huan; Jiang, Lei

2018-06-26

Fabrication of a high quality quantum dot (QD) film is essentially important for a high-performance QD light emitting diode display (QLED) device. It is normally a high-cost and multiple-step solution-transfer process where large amounts of QDs were needed but with only limited usefulness. Thus, developing a simple, efficient, and low-cost approach to fabricate high-quality micropatterned QD film is urgently needed. Here, we proposed that the Chinese brush enables the controllable transfer of a QD solution directly onto a homogeneous and ultrasmooth micropatterned film in one step. It is proposed that the dynamic balance of QDs was enabled during the entire solution transfer process under the cooperative effect of Marangoni flow aroused by the asymmetric solvent evaporation and the Laplace pressure different by conical fibers. By this approach, QD nanoparticles were homogeneously transferred onto the desired area on the substrate. The as-prepared QLED devices show rather high performances with the current efficiencies of 72.38, 26.03, and 4.26 cd/A and external quantum efficiencies of 17.40, 18.96, and 6.20% for the green, red, and blue QLED devices, respectively. We envision that the result offers a low-cost, facile, and practically applicable solution-processing approach that works even in air for fabricating high-performance QLED devices.

A gross anatomy flipped classroom effects performance, retention, and higher-level thinking in lower performing students.

PubMed

Day, Leslie J

2018-01-22

A flipped classroom is a growing pedagogy in higher education. Many research studies on the flipped classroom have focused on student outcomes, with the results being positive or inconclusive. A few studies have analyzed confounding variables, such as student's previous achievement, or the impact of a flipped classroom on long-term retention and knowledge transfer. In the present study, students in a Doctor of Physical Therapy program in a traditional style lecture of gross anatomy (n = 105) were compared to similar students in a flipped classroom (n = 112). Overall, students in the flipped anatomy classroom had an increase in semester average grades (P = 0.01) and performance on higher-level analytical questions (P < 0.001). Long-term retention and knowledge transfer was analyzed in a subsequent semester's sequenced kinesiology course, with students from the flipped anatomy classroom performing at a higher level in kinesiology (P < 0.05). Student's pre-matriculation grade point average was also considered. Previously lower performing students, when in a flipped anatomy class, outperformed their traditional anatomy class counterparts in anatomy semester grades (P < 0.05), accuracy on higher-level analytical anatomy multiple-choice questions (P < 0.05) and performance in subsequent course of kinesiology (P < 0.05). This study suggests that the flipped classroom may benefit lower performing student's knowledge acquisition and transfer to a greater degree than higher performing students. Future studies should explore the underlying reasons for improvement in lower performing students. Anat Sci Educ. © 2018 American Association of Anatomists. © 2018 American Association of Anatomists.

Structural integrity of callosal midbody influences intermanual transfer in a motor reaction-time task.

PubMed

Bonzano, Laura; Tacchino, Andrea; Roccatagliata, Luca; Mancardi, Giovanni Luigi; Abbruzzese, Giovanni; Bove, Marco

2011-02-01

Training one hand on a motor task results in performance improvements in the other hand, also when stimuli are randomly presented (nonspecific transfer). Corpus callosum (CC) is the main structure involved in interhemispheric information transfer; CC pathology occurs in patients with multiple sclerosis (PwMS) and is related to altered performance of tasks requiring interhemispheric transfer of sensorimotor information. To investigate the role of CC in nonspecific transfer during a pure motor reaction-time task, we combined motor behavior with diffusion tensor imaging analysis in PwMS. Twenty-two PwMS and 10 controls, all right-handed, were asked to respond to random stimuli with appropriate finger opposition movements with the right (learning) and then the left (transfer) hand. PwMS were able to improve motor performance reducing response times with practice with a trend similar to controls and preserved the ability to transfer the acquired motor information from the learning to the transfer hand. A higher variability in the transfer process, indicated by a significantly larger standard deviation of mean nonspecific transfer, was found in the PwMS group with respect to the control group, suggesting the presence of subtle impairments in interhemispheric communication in some patients. Then, we correlated the amount of nonspecific transfer with mean fractional anisotropy (FA) values, indicative of microstructural damage, obtained in five CC subregions identified on PwMS's FA maps. A significant correlation was found only in the subregion including posterior midbody (Pearson's r = 0.74, P = 0.003), which thus seems to be essential for the interhemispheric transfer of information related to pure sensorimotor tasks. Copyright © 2010 Wiley-Liss, Inc.

Relative frequency of knowledge of performance and motor skill learning.

PubMed

Weeks, D L; Kordus, R N

1998-09-01

This study examined the effects of variations in relative frequency of knowledge of performance (KP) on acquisition, retention, and transfer of form for a multilimb closed sport skill. Two groups received either 100% relative frequency of KP or 33% relative frequency of KP while learning the soccer throw-in skill. Participants were boys between the ages of 11 and 14 years who were unfamiliar with the skill. Participants performed a 30-trial acquisition phase in which KP was provided about one of eight aspects of form. Following acquisition, five trial retention and transfer (to a target at a different distance than experienced in acquisition) tests were administered at 5 min, 24 hr, and 72 hr. Although no group differences were found for accuracy scores, the 33% group had higher form scores in acquisition and all retention and transfer tests. It was concluded that reducing the relative frequency of KP eliminated a dependency on KP to guide performance in acquisition, which was beneficial for maintaining form in conditions in which KP was absent.

Profiling optimization for big data transfer over dedicated channels

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yun, D.; Wu, Qishi; Rao, Nageswara S

The transfer of big data is increasingly supported by dedicated channels in high-performance networks, where transport protocols play an important role in maximizing applicationlevel throughput and link utilization. The performance of transport protocols largely depend on their control parameter settings, but it is prohibitively time consuming to conduct an exhaustive search in a large parameter space to find the best set of parameter values. We propose FastProf, a stochastic approximation-based transport profiler, to quickly determine the optimal operational zone of a given data transfer protocol/method over dedicated channels. We implement and test the proposed method using both emulations based onmore » real-life performance measurements and experiments over physical connections with short (2 ms) and long (380 ms) delays. Both the emulation and experimental results show that FastProf significantly reduces the profiling overhead while achieving a comparable level of end-to-end throughput performance with the exhaustive search-based approach.« less

Experimental Research on Optimizing Inlet Airflow of Wet Cooling Towers under Crosswind Conditions

NASA Astrophysics Data System (ADS)

Chen, You Liang; Shi, Yong Feng; Hao, Jian Gang; Chang, Hao; Sun, Feng Zhong

2018-01-01

A new approach of installing air deflectors around tower inlet circumferentially was proposed to optimize the inlet airflow and reduce the adverse effect of crosswinds on the thermal performance of natural draft wet cooling towers (NDWCT). And inlet airflow uniformity coefficient was defined to analyze the uniformity of circumferential inlet airflow quantitatively. Then the effect of air deflectors on the NDWCT performance was investigated experimentally. By contrast between inlet air flow rate and cooling efficiency, it has been found that crosswinds not only decrease the inlet air flow rate, but also reduce the uniformity of inlet airflow, which reduce NDWCT performance jointly. After installing air deflectors, the inlet air flow rate and uniformity coefficient increase, the uniformity of heat and mass transfer increases correspondingly, which improve the cooling performance. In addition, analysis on Lewis factor demonstrates that the inlet airflow optimization has more enhancement of heat transfer than mass transfer, but leads to more water evaporation loss.

Performance investigation and comparison of different turbulator shapes in solar water heating collector system

NASA Astrophysics Data System (ADS)

Khargotra, Rohit; Dhingra, Sunil; Chauhan, Ranchan; Singh, Tej

2018-05-01

The effective use of solar energy is hindered by the intermittent nature of its availability, limiting its use and effectiveness in domestic and industrial applications especially in water heating. In the present paper, the performance of different turbulator shapes in solar water heating collector system has been studied experimentally and comparison on the output performance has been carried out. Effects of insertion of coil-spring turbulator on heat transfer rate, mass flow rate, heat gain by the fluid etc. is studied by disturbing the flow inside the absorber tubes in a solar flat plate collector. The coil-spring used as a turbulator is placed inside the absorber tube which creates a continuous swirling flow along the tube wall. The results of the heat transfer have been compared well with the available results. The heat transfer rate in the collector has been found to be increased by 18% to 70%. Solar water heater having inserts in the flow tubes perform better than the conventional plain ones. It has been observed that heat losses are reduced consequently increasing the thermal performance to about 70% over the plain water heater under same operating conditions. The coil-spring used as a turbulator is placed inside the riser tube while the twisted tape is inserted into the wire coil to create a continuous swirling flow along the tube wall. The results of the heat transfer have been compared with the available results. Solar water heater having inserts in the flow tubes perform better than the conventional plain ones.

Sequence specific motor performance gains after memory consolidation in children and adolescents.

PubMed

Dorfberger, Shoshi; Adi-Japha, Esther; Karni, Avi

2012-01-01

Memory consolidation for a trained sequence of finger opposition movements, in 9- and 12-year-old children, was recently found to be significantly less susceptible to interference by a subsequent training experience, compared to that of 17-year-olds. It was suggested that, in children, the experience of training on any sequence of finger movements may affect the performance of the sequence elements, component movements, rather than the sequence as a unit; the latter has been implicated in the learning of the task by adults. This hypothesis implied a possible childhood advantage in the ability to transfer the gains from a trained to the reversed, untrained, sequence of movements. Here we report the results of transfer tests undertaken to test this proposal in 9-, 12-, and 17-year-olds after training in the finger-to-thumb opposition sequence (FOS) learning task. Our results show that the performance gains in the trained sequence partially transferred from the left, trained hand, to the untrained hand at 48-hours after a single training session in the three age-groups tested. However, there was very little transfer of the gains from the trained to the untrained, reversed, sequence performed by either hand. The results indicate sequence specific post-training gains in FOS performance, as opposed to a general improvement in performance of the individual, component, movements that comprised both the trained and untrained sequences. These results do not support the proposal that the reduced susceptibility to interference, in children before adolescence, reflects a difference in movement syntax representation after training.

Learning and transfer in motor-respiratory coordination.

PubMed

Hessler, Eric E; Amazeen, Polemnia G

2014-02-01

Motor-respiratory coordination occurs naturally during exercise, but the number of coordination patterns performed between movement and breathing is limited. We investigated whether participants could acquire novel ratios (either 5:2 or 5:3). To examine complex temporal relationships between movement and breathing, we used lagged return plots that were produced by graphing relative phase against relative phase after a time delay. By the end of practice, participants performed 5:2 consistently and performed 5:3 using more stable ratios (3:2 and 2:1). Lagged return plots revealed that 5:3 learners harnessed the stable inphase and antiphase patterns to stabilize the required ratio. That strategy resulted in the performance of smaller-integer ratios in the production of 5:3 but not 5:2. Despite those differences, there was positive transfer to unpracticed ratios that was similar in both learning conditions. The time series analysis of lagged return plots revealed differences in ratio performance at transfer. Ratios whose component frequencies were farther apart, like 7:2, were performed consistently, while ratios whose component frequencies were more similar, like 5:4, elicited attraction to inphase and antiphase. The implication is that participants can combine more stable chunks of rhythmic behavior to produce more complex ratios. Copyright © 2013 Elsevier B.V. All rights reserved.

Multiphysics Nuclear Thermal Rocket Thrust Chamber Analysis

NASA Technical Reports Server (NTRS)

Wang, Ten-See

2005-01-01

The objective of this effort is t o develop an efficient and accurate thermo-fluid computational methodology to predict environments for hypothetical thrust chamber design and analysis. The current task scope is to perform multidimensional, multiphysics analysis of thrust performance and heat transfer analysis for a hypothetical solid-core, nuclear thermal engine including thrust chamber and nozzle. The multiphysics aspects of the model include: real fluid dynamics, chemical reactivity, turbulent flow, and conjugate heat transfer. The model will be designed to identify thermal, fluid, and hydrogen environments in all flow paths and materials. This model would then be used to perform non- nuclear reproduction of the flow element failures demonstrated in the Rover/NERVA testing, investigate performance of specific configurations and assess potential issues and enhancements. A two-pronged approach will be employed in this effort: a detailed analysis of a multi-channel, flow-element, and global modeling of the entire thrust chamber assembly with a porosity modeling technique. It is expected that the detailed analysis of a single flow element would provide detailed fluid, thermal, and hydrogen environments for stress analysis, while the global thrust chamber assembly analysis would promote understanding of the effects of hydrogen dissociation and heat transfer on thrust performance. These modeling activities will be validated as much as possible by testing performed by other related efforts.

Exploring inter-task transfer following a CO-OP approach with four children with DCD: A single subject multiple baseline design.

PubMed

Capistran, Julie; Martini, Rose

2016-10-01

Cognitive Orientation to daily Occupational Performance (CO-OP) approach has been shown to be effective for improving the performance of tasks worked on in therapy and the use of cognitive strategies. No study to date seems to have explored its effectiveness for improving performance of untrained tasks (inter-task transfer) in children with Developmental Coordination Disorder (DCD). This study aimed to determine whether CO-OP leads to improved performance in an untrained task. A single-subject design with multiple baselines across skills was adopted, with three replications. Four children with DCD (7-12years) received 10 sessions of CO-OP intervention where each child worked on three tasks during therapy sessions and a fourth task was identified, but not worked on, to verify inter-task transfer. Task performance was rated over four phases (baseline, intervention, post-intervention, follow-up) using the Performance Quality Rating Scale (PQRS-OD). Graphed data was statistically analyzed using a two or three standard deviation band method. Significant improvement was obtained for 11 of 12 tasks worked on during therapy and for two of the four untrained tasks. These results indicate that the effectiveness of CO-OP to improve untrained tasks in children merit further exploration. Copyright © 2016 Elsevier B.V. All rights reserved.

International Students in Transition: International Community College Transfer Students in a Texas Research University

ERIC Educational Resources Information Center

Zhang, Yi Leaf

2016-01-01

This chapter focuses on a unique transfer population, international transfer students, and depicts their demographic backgrounds, academic interests and performance, as well as enrollment trends in the past decade.

Validation of the VBLaST peg transfer task: a first step toward an alternate training standard.

PubMed

Chellali, A; Zhang, L; Sankaranarayanan, G; Arikatla, V S; Ahn, W; Derevianko, A; Schwaitzberg, S D; Jones, D B; DeMoya, M; Cao, C G L

2014-10-01

The FLS trainer lacks objective and automated assessments of laparoscopic performance and requires a large supply of relatively expensive consumables. Virtual reality simulation has a great potential as a training and assessment tool of laparoscopic skills and can overcome some limitations of the FLS trainer. This study was carried out to assess the value of our Virtual Basic Laparoscopic Surgical Trainer (VBLaST(©)) in the peg transfer task compared to the FLS trainer and its ability to differentiate performance between novice, intermediate, and expert groups. Thirty subjects were divided into three groups: novices (PGY1-2, n = 10), intermediates (PGY3-4, n = 10), and experts (PGY5, surgical fellows and attendings, n = 10). All subjects performed ten trials of the peg transfer task on each simulator. Assessment of laparoscopic performance was based on FLS scoring while a questionnaire was used for subjective evaluation. The performance scores in the two simulators were correlated, though subjects performed significantly better in the FLS trainer. Experts performed better than novices only on the FLS trainer while no significant differences were observed between the other groups. Moreover, a significant learning effect was found on both trainers, with a greater improvement of performance on the VBLaST(©). Finally, 82.6% of the subjects preferred the FLS over the VBLaST(©) for surgical training which could be attributed to the novelty of the VR technology and existing deficiencies of the user interface for the VBLaST(©). This study demonstrated that the VBLaST(©) reproduced faithfully some aspects of the FLS peg transfer task (such as color, size, and shape of the peg board, etc.) while other aspects require additional development. Future improvement of the user interface and haptic feedback will enhance the value of the system as an alternative to the FLS as the standard training tool for laparoscopic surgery skills.

Identification of the contribution of contact and aerial biomechanical parameters in acrobatic performance

PubMed Central

Haering, Diane; Huchez, Aurore; Barbier, Franck; Holvoët, Patrice; Begon, Mickaël

2017-01-01

Introduction Teaching acrobatic skills with a minimal amount of repetition is a major challenge for coaches. Biomechanical, statistical or computer simulation tools can help them identify the most determinant factors of performance. Release parameters, change in moment of inertia and segmental momentum transfers were identified in the prediction of acrobatics success. The purpose of the present study was to evaluate the relative contribution of these parameters in performance throughout expertise or optimisation based improvements. The counter movement forward in flight (CMFIF) was chosen for its intrinsic dichotomy between the accessibility of its attempt and complexity of its mastery. Methods Three repetitions of the CMFIF performed by eight novice and eight advanced female gymnasts were recorded using a motion capture system. Optimal aerial techniques that maximise rotation potential at regrasp were also computed. A 14-segment-multibody-model defined through the Rigid Body Dynamics Library was used to compute recorded and optimal kinematics, and biomechanical parameters. A stepwise multiple linear regression was used to determine the relative contribution of these parameters in novice recorded, novice optimised, advanced recorded and advanced optimised trials. Finally, fixed effects of expertise and optimisation were tested through a mixed-effects analysis. Results and discussion Variation in release state only contributed to performances in novice recorded trials. Moment of inertia contribution to performance increased from novice recorded, to novice optimised, advanced recorded, and advanced optimised trials. Contribution to performance of momentum transfer to the trunk during the flight prevailed in all recorded trials. Although optimisation decreased transfer contribution, momentum transfer to the arms appeared. Conclusion Findings suggest that novices should be coached on both contact and aerial technique. Inversely, mainly improved aerial technique helped advanced gymnasts increase their performance. For both, reduction of the moment of inertia should be focused on. The method proposed in this article could be generalized to any aerial skill learning investigation. PMID:28422954

NO-sensing performance of vacancy defective monolayer MoS2 predicted by density function theory

NASA Astrophysics Data System (ADS)

Li, Feifei; Shi, Changmin

2018-03-01

Using density functional theory (DFT), we predict the NO-sensing performance of monolayer MoS2 (MoS2-MLs) with and without MoS3-vacancy/S-vacancy defects. Our theoretical results demonstrate that MoS3- and S-vacancy defective MoS2-MLs show stronger chemisorption and greater electron transfer effects than pure MoS2-MLs. The charge transfer analysis showed pure and defective MoS2-MLs all act as donors. Both MoS3-vacancy and S-vacancy defects induce dramatic changes of electronic properties of MoS2-MLs, which have direct relationship with gas sensing performance. In addition, S-vacancy defect leads to more electrons transfer to NO molecule than MoS3-vacancy defect. The H2O molecule urges more electrons transfer from MoS3- or S-vacancy defective MoS2-MLs to NO molecule. We believe that this calculation results will provide some information for future experiment.

Combustion performance and heat transfer characterization of LOX/hydrocarbon type propellants

NASA Technical Reports Server (NTRS)

Michel, R. W.

1983-01-01

An evaluation liquid oxygen (LOX) and various hydrocarbon fuels as low cost alternative propellants suitable for future space transportation system applications was done. The emphasis was directed toward low earth orbit maneuvering engine and reaction control engine systems. The feasibility of regeneratively cooling an orbit maneuvering thruster was analytically determined over a range of operating conditions from 100 to 1000 psia chamber pressure and 1000 to 10,000-1bF thrust, and specific design points were analyzed in detail for propane, methane, RP-1, ammonia, and ethanol; similar design point studies were performed for a film-cooled reaction control thruster. Heat transfer characteristics of propane were experimentally evaluated in heated tube tests. Forced convection heat transfer coefficients were determined. Seventy-seven hot firing tests were conducted with LOX/propane and LOX/ethanol, for a total duration of nearly 1400 seconds, using both heat sink and water-cooled calorimetric chambers. Combustion performance and stability and gas-side heat transfer characteristics were evaluated.

High-frequency self-aligned graphene transistors with transferred gate stacks

PubMed Central

Cheng, Rui; Bai, Jingwei; Liao, Lei; Zhou, Hailong; Chen, Yu; Liu, Lixin; Lin, Yung-Chen; Jiang, Shan; Huang, Yu; Duan, Xiangfeng

2012-01-01

Graphene has attracted enormous attention for radio-frequency transistor applications because of its exceptional high carrier mobility, high carrier saturation velocity, and large critical current density. Herein we report a new approach for the scalable fabrication of high-performance graphene transistors with transferred gate stacks. Specifically, arrays of gate stacks are first patterned on a sacrificial substrate, and then transferred onto arbitrary substrates with graphene on top. A self-aligned process, enabled by the unique structure of the transferred gate stacks, is then used to position precisely the source and drain electrodes with minimized access resistance or parasitic capacitance. This process has therefore enabled scalable fabrication of self-aligned graphene transistors with unprecedented performance including a record-high cutoff frequency up to 427 GHz. Our study defines a unique pathway to large-scale fabrication of high-performance graphene transistors, and holds significant potential for future application of graphene-based devices in ultra–high-frequency circuits. PMID:22753503

Method and system for simulating heat and mass transfer in cooling towers

DOEpatents

Bharathan, Desikan; Hassani, A. Vahab

1997-01-01

The present invention is a system and method for simulating the performance of a cooling tower. More precisely, the simulator of the present invention predicts values related to the heat and mass transfer from a liquid (e.g., water) to a gas (e.g., air) when provided with input data related to a cooling tower design. In particular, the simulator accepts input data regarding: (a) cooling tower site environmental characteristics; (b) cooling tower operational characteristics; and (c) geometric characteristics of the packing used to increase the surface area within the cooling tower upon which the heat and mass transfer interactions occur. In providing such performance predictions, the simulator performs computations related to the physics of heat and mass transfer within the packing. Thus, instead of relying solely on trial and error wherein various packing geometries are tested during construction of the cooling tower, the packing geometries for a proposed cooling tower can be simulated for use in selecting a desired packing geometry for the cooling tower.

Management of undescended testis may be improved with educational updates and new transferring model.

PubMed

Yi, Wei; Sheng-de, Wu; Lian-Ju, Shen; Tao, Lin; Da-Wei, He; Guang-Hui, Wei

2018-05-24

To investigate whether management of undescended testis (UDT) may be improved with educational updates and new transferring model among referring providers (RPs). The age of orchidopexies performed in Children's Hospital of Chongqing Medical University were reviewed. We then proposed educational updates and new transferring model among RPs. The age of orchidopexies performed after our intervention were collected. Data were represented graphically and statistical analysis Chi-square for trend were used. A total of 1543 orchidopexies were performed. The median age of orchidopexy did not matched the target age of 6-12 months in any subsequent year. Survey of the RPs showed that 48.85% of their recommended age was below 12 months. However, only 25.50% of them would directly make a surgical referral to pediatric surgery specifically at this point. After we proposed educational updates, tracking the age of orchidopexy revealed a statistically significant trend downward. The management of undescended testis may be improved with educational updates and new transferring model among primary healthcare practitioners.

Noncognitive Predictors of Academic Performance and Persistence in Horizontal and Vertical Transfer Students by Academic Level

ERIC Educational Resources Information Center

Davis, Christopher A.

2010-01-01

College students increasingly are transferring among institutions of higher education in pursuit of their educational goals. The existing research on transfer students, however, does not adequately explore the unique characteristics of this heterogeneous population. The literature on transfer students suggests that transfer students are at-risk…

41 CFR 102-36.365 - May we transfer or donate canines that have been used in the performance of law enforcement duties?

Code of Federal Regulations, 2010 CFR

2010-07-01

... 41 Public Contracts and Property Management 3 2010-07-01 2010-07-01 false May we transfer or donate canines that have been used in the performance of law enforcement duties? 102-36.365 Section 102-36.365 Public Contracts and Property Management Federal Property Management Regulations System (Continued) FEDERAL MANAGEMENT REGULATION PERSONAL...

Atmospheric turbulence effects on the performance of the laser wireless power transfer system

NASA Astrophysics Data System (ADS)

Kapranov, V. V.; Matsak, I. S.; Tugaenko, V. Yu.; Blank, A. V.; Suhareva, N. A.

2017-02-01

Application of adaptive correction is necessary to control wandering of the laser beam in wireless power transfer (WPT) system. In this paper we describe experimental results of using different adaptive correction techniques for both weak and strong turbulence conditions. All experiments were performed over a 1.5 km near-horizontal atmospheric path. Some criteria for choosing parameters of adaptive correction are given.

Computer Assets Recovery Project

NASA Technical Reports Server (NTRS)

CortesPena, Aida Yoguely

2010-01-01

This document reports on the project that was performed during the internship of the author. The project involved locating and recovering machines in various locations that Boeing has no need for, and therefore requires that they be transferred to another user or transferred to a non-profit organization. Other projects that the author performed was an inventory of toner and printers, loading new computers and connecting them to the network.

Reflective Coating on Fibrous Insulation for Reduced Heat Transfer

NASA Technical Reports Server (NTRS)

Hass, Derek D.; Prasad, B. Durga; Glass, David E.; Wiedemann, Karl E.

1997-01-01

Radiative heat transfer through fibrous insulation used in thermal protection systems (TPS) is significant at high temperatures (1200 C). Decreasing the radiative heat transfer through the fibrous insulation can thus have a major impact on the insulating ability of the TPS. Reflective coatings applied directly to the individual fibers in fibrous insulation should decrease the radiative heat transfer leading to an insulation with decreased effective thermal conductivity. Coatings with high infrared reflectance have been developed using sol-gel techniques. Using this technique, uniform coatings can be applied to fibrous insulation without an appreciable increase in insulation weight or density. Scanning electron microscopy, Fourier Transform infrared spectroscopy, and ellipsometry have been performed to evaluate coating performance.

Transfer film evaluation for shuttle engine turbopump bearing

NASA Technical Reports Server (NTRS)

Kannel, J. W.; Dufrane, K. F.

1981-01-01

A series of low speed experiments to evaluate the possible occurrence of transfer film lubrication and the effectiveness of burnished films in the shuttle spacecraft main engine thrust bearings were conducted. No evidence of transfer film lubrication was evident, although this could have been the result of the (used) condition of the bearing. Burnished films of either Teflon or Rulon were found to greatly enhance the performance of the bearing. Crush load experiments indicated that the bearing ultimate load capability is on the order of 489,000 N (110,000 pounds). The effect of ball (as well as race) burnishing techniques on bearing performance, different types of burnished films, and transfer film formation are suggested for further study.

Deep transfer learning for automatic target classification: MWIR to LWIR

NASA Astrophysics Data System (ADS)

Ding, Zhengming; Nasrabadi, Nasser; Fu, Yun

2016-05-01

Publisher's Note: This paper, originally published on 5/12/2016, was replaced with a corrected/revised version on 5/18/2016. If you downloaded the original PDF but are unable to access the revision, please contact SPIE Digital Library Customer Service for assistance. When dealing with sparse or no labeled data in the target domain, transfer learning shows its appealing performance by borrowing the supervised knowledge from external domains. Recently deep structure learning has been exploited in transfer learning due to its attractive power in extracting effective knowledge through multi-layer strategy, so that deep transfer learning is promising to address the cross-domain mismatch. In general, cross-domain disparity can be resulted from the difference between source and target distributions or different modalities, e.g., Midwave IR (MWIR) and Longwave IR (LWIR). In this paper, we propose a Weighted Deep Transfer Learning framework for automatic target classification through a task-driven fashion. Specifically, deep features and classifier parameters are obtained simultaneously for optimal classification performance. In this way, the proposed deep structures can extract more effective features with the guidance of the classifier performance; on the other hand, the classifier performance is further improved since it is optimized on more discriminative features. Furthermore, we build a weighted scheme to couple source and target output by assigning pseudo labels to target data, therefore we can transfer knowledge from source (i.e., MWIR) to target (i.e., LWIR). Experimental results on real databases demonstrate the superiority of the proposed algorithm by comparing with others.

Quantifying transfer after perceptual-motor sequence learning: how inflexible is implicit learning?

PubMed Central

Sanchez, Daniel J.; Yarnik, Eric N.

2015-01-01

Studies of implicit perceptual-motor sequence learning have often shown learning to be inflexibly tied to the training conditions during learning. Since sequence learning is seen as a model task of skill acquisition, limits on the ability to transfer knowledge from the training context to a performance context indicates important constraints on skill learning approaches. Lack of transfer across contexts has been demonstrated by showing that when task elements are changed following training, this leads to a disruption in performance. These results have typically been taken as suggesting that the sequence knowledge relies on integrated representations across task elements (Abrahamse, Jiménez, Verwey, & Clegg, Psychon Bull Rev 17:603–623, 2010a). Using a relatively new sequence learning task, serial interception sequence learning, three experiments are reported that quantify this magnitude of performance disruption after selectively manipulating individual aspects of motor performance or perceptual information. In Experiment 1, selective disruption of the timing or order of sequential actions was examined using a novel response manipulandum that allowed for separate analysis of these two motor response components. In Experiments 2 and 3, transfer was examined after selective disruption of perceptual information that left the motor response sequence intact. All three experiments provided quantifiable estimates of partial transfer to novel contexts that suggest some level of information integration across task elements. However, the ability to identify quantifiable levels of successful transfer indicates that integration is not all-or-none and that measurement sensitivity is a key in understanding sequence knowledge representations. PMID:24668505

Experimental investigation of heat transfer and flow using V and broken V ribs within gas turbine blade cooling passage

NASA Astrophysics Data System (ADS)

Kumar, Sourabh; Amano, R. S.

2015-05-01

Gas turbines are extensively used for aircraft propulsion, land-based power generation, and various industrial applications. With an increase in turbine rotor inlet temperatures, developments in innovative gas turbine cooling technology enhance the efficiency and power output; these advancements of turbine cooling have allowed engine designs to exceed normal material temperature limits. For internal cooling design, techniques for heat extraction from the surfaces exposed to hot stream of gas are based on an increase in the heat transfer areas and on the promotion of turbulence of the cooling flow. In this study, an improvement in performance is obtained by casting repeated continuous V- and broken V-shaped ribs on one side of the two pass square channels into the core of the blade. A detailed experimental investigation is done for two pass square channels with a 180° turn. Detailed heat transfer distribution occurring in the ribbed passage is reported for a steady state experiment. Four different combinations of 60° V- and broken 60° V-ribs in a channel are considered. A series of thermocouples are used to obtain the temperature on the channel surface and local heat transfer coefficients are obtained for Reynolds numbers 16,000, 56,000 and 85,000 within the turbulent flow regime. Area averaged data are calculated in order to compare the overall performance of the tested ribbed surface and to evaluate the degree of heat transfer enhancement induced by the rib. Flow within the channels is characterized by heat transfer enhancing ribs, bends, rotation and buoyancy effects. A series of experimental measurements is performed to predict the overall performance of the channel. This paper presents an attempt to collect information about the Nusselt number, the pressure drop and the overall performance of the eight different ribbed ducts at the specified Reynolds number. The main contribution of this study is to evaluate the best combination of rib arrangements throughout the two pass cooling channels. After a series of experiments, it can be concluded that the distribution of peaks in heat transfer in the case of inlet V and outlet inverted V is high. The overall performances for broken ribs are higher compared with the continuous ribs in two-pass cooling channels.

49 CFR 179.400-4 - Insulation system and performance standard.

Code of Federal Regulations, 2012 CFR

2012-10-01

... of heat transfer used for determining the satisfactory performance of the insulation system of a... 49 Transportation 3 2012-10-01 2012-10-01 false Insulation system and performance standard. 179... DOT-113 and 107A) § 179.400-4 Insulation system and performance standard. (a) For the purposes of this...

49 CFR 179.400-4 - Insulation system and performance standard.

Code of Federal Regulations, 2010 CFR

2010-10-01

... of heat transfer used for determining the satisfactory performance of the insulation system of a... 49 Transportation 2 2010-10-01 2010-10-01 false Insulation system and performance standard. 179... DOT-113 and 107A) § 179.400-4 Insulation system and performance standard. (a) For the purposes of this...

49 CFR 179.400-4 - Insulation system and performance standard.

Code of Federal Regulations, 2013 CFR

2013-10-01

... of heat transfer used for determining the satisfactory performance of the insulation system of a... 49 Transportation 3 2013-10-01 2013-10-01 false Insulation system and performance standard. 179... DOT-113 and 107A) § 179.400-4 Insulation system and performance standard. (a) For the purposes of this...

49 CFR 179.400-4 - Insulation system and performance standard.

Code of Federal Regulations, 2011 CFR

2011-10-01

... of heat transfer used for determining the satisfactory performance of the insulation system of a... 49 Transportation 3 2011-10-01 2011-10-01 false Insulation system and performance standard. 179... DOT-113 and 107A) § 179.400-4 Insulation system and performance standard. (a) For the purposes of this...

49 CFR 179.400-4 - Insulation system and performance standard.

Code of Federal Regulations, 2014 CFR

2014-10-01

... of heat transfer used for determining the satisfactory performance of the insulation system of a... 49 Transportation 3 2014-10-01 2014-10-01 false Insulation system and performance standard. 179... DOT-113 and 107A) § 179.400-4 Insulation system and performance standard. (a) For the purposes of this...

The Myths and Realities of Simulations in Performance Technology.

ERIC Educational Resources Information Center

Thiagarajan, Sivasailam

1998-01-01

Examines misconceptions about simulations for performance technology concerning what they reflect, varieties, uses (instruction, awareness, performance assessment, team building, transfer, research, therapy), levels of fidelity, design approaches, formats (graphic models; card, race, and cyclical games; interactive fiction; production simulations;…

Practice schedules for surgical skills: the role of task characteristics and proactive interference on psychomotor skills acquisition.

PubMed

Willis, Ross E; Curry, Eileen; Gomez, Pedro Pablo

2013-01-01

Although break periods during training sessions are desirable, it is unclear what learners should do during these breaks. Some educators recommend that learners abstain from all task-related practice; however, it is possible that switching to an alternate exercise during break periods can also be effective. The construct of proactive interference (PI) posits that new learning is disrupted by prior learning. PI can be "released" when the nature of the task is changed after several practice trials. In this study, we examined the existence of PI in motor learning under 5 training conditions that differed in contrast to a target exercise. Preclinical medical students (n = 75) performed 1 trial of peg transfer as a pretest. Participants were then randomly assigned to 1 of 5 training conditions: mass practice, similar exercise (laparoscopic bean transfer), dissimilar exercise (open suturing), observation, or rest. Participants in the mass practice condition practiced peg transfer in 3 training blocks of 15 minutes, each separated by a 5-minute break. Participants in the other conditions performed 3 training blocks consisting of 15 minutes of peg transfer followed by an interspersed alternate exercise. On completion of 3 training blocks, participants performed 1 additional peg transfer trial as a posttest. Despite having trained for the same amount of time on the target task, Analysis of Covariance on posttest scores using pretest scores as the covariate indicated a significant main effect for training condition (p = 0.009). Participants engaging in mass practice performed significantly worse than participants in the dissimilar (p = 0.012), observation (p = 0.022), and rest (p < 0.001) conditions. Additionally, participants in the similar exercise condition performed worse than participants in the rest condition (p = 0.03). When learning a laparoscopic task, a break comprised of dissimilar practice or unrelated activities is effective in releasing PI and improving performance. © 2013 Association of Program Directors in Surgery. Published by Elsevier Inc. All rights reserved.

Soft-light overhead illumination systems improve laparoscopic task performance.

PubMed

Takai, Akihiro; Takada, Yasutsugu; Motomura, Hideki; Teramukai, Satoshi

2014-02-01

The aim of this study was to evaluate the impact of attached shadow cues for laparoscopic task performance. We developed a soft-light overhead illumination system (SOIS) that produced attached shadows on objects. We compared results using the SOIS with those using a conventional illumination system with regard to laparoscopic experience and laparoscope-to-target distances (LTDs). Forty-two medical students and 23 surgeons participated in the study. A peg transfer task (LTD, 120 mm) for students and surgeons, and a suture removal task (LTD, 30 mm) for students were performed. Illumination systems were randomly assigned to each task. Endpoints were: total number of peg transfers; percentage of peg-dropping errors; and total execution time for suture removal. After the task, participants filled out a questionnaire on their preference for a particular illumination system. Total number of peg transfers was greater with the SOIS for both students and surgeons. Percentage of peg-dropping errors for surgeons was lower with the SOIS. Total execution time for suture removal was shorter with the SOIS. Forty-five participants (69% in total) evaluated the SOIS for easier task performance. The present results confirm that the SOIS improves laparoscopic task performance, regardless of previous laparoscopic experience or LTD.

Targeting latent function: encouraging effective encoding for successful memory training and transfer.

PubMed

Lustig, Cindy; Flegal, Kristin E

2008-12-01

Cognitive training programs for older adults often result in improvements at the group level. However, there are typically large age and individual differences in the size of training benefits. These differences may be related to the degree to which participants implement the processes targeted by the training program. To test this possibility, we tested older adults in a memory-training procedure either under specific strategy instructions designed to encourage semantic, integrative encoding, or in a condition that encouraged time and attention to encoding but allowed participants to choose their own strategy. Both conditions improved the performance of old-old adults relative to an earlier study (D. Bissig & C. Lustig, 2007) and reduced self-reports of everyday memory errors. Performance in the strategy-instruction group was related to preexisting ability; performance in the strategy?choice group was not. The strategy-choice group performed better on a laboratory transfer test of recognition memory, and training performance was correlated with reduced everyday memory errors. Training programs that target participants' latent but inefficiently used abilities while allowing flexibility in bringing those abilities to bear may best promote effective training and transfer. Copyright (c) 2009 APA, all rights reserved.

How Do Transfers Survive after "Transfer Shock"? A Longitudinal Study of Transfer Student Departure at a Four-Year Institution

ERIC Educational Resources Information Center

Ishitani, Terry T.

2008-01-01

Prompted by the notion of "Transfer Shock", numerous studies examined academic performance of transfer students at senior institutions. However, few studies are found that examine how the varying nature of semester GPAs impact subsequent persistence behavior of transfer students after the initial drop in their college GPAs. Using an institutional…

Variable Delay Testing Using ONE

NASA Technical Reports Server (NTRS)

Ishac, Joseph

2002-01-01

This paper investigates the effect of long and changing propagation delays on the performance of TCP file transfers. Tests are performed with machines that emulate communication from a low/medium-earth satellite to Earth by way of a geosynchronous satellite. As a result of these tests, we find that TCP is fairly robust to varying delays given a high enough TCP timer granularity. However, performance degrades noticeably for larger file transfers when a finer timer granularity is used. Such results have also been observed in previous simulations by other researchers, and thus, this work serves as an extension of those results.

Transferability of Dual-Task Coordination Skills after Practice with Changing Component Tasks

PubMed Central

Schubert, Torsten; Liepelt, Roman; Kübler, Sebastian; Strobach, Tilo

2017-01-01

Recent research has demonstrated that dual-task performance with two simultaneously presented tasks can be substantially improved as a result of practice. Among other mechanisms, theories of dual-task practice-relate this improvement to the acquisition of task coordination skills. These skills are assumed (1) to result from dual-task practice, but not from single-task practice, and (2) to be independent from the specific stimulus and response mappings during the practice situation and, therefore, transferable to new dual task situations. The present study is the first that provides an elaborated test of these assumptions in a context with well-controllable practice and transfer situations. To this end, we compared the effects of dual-task and single-task practice with a visual and an auditory sensory-motor component task on the dual-task performance in a subsequent transfer session. Importantly, stimulus and stimulus-response mapping conditions in the two component tasks changed repeatedly during practice sessions, which prevents that automatized stimulus-response associations may be transferred from practice to transfer. Dual-task performance was found to be improved after practice with the dual tasks in contrast to the single-task practice. These findings are consistent with the assumption that coordination skills had been acquired, which can be transferred to other dual-task situations independently on the specific stimulus and response mapping conditions of the practiced component tasks. PMID:28659844

Improved Stirling engine performance using jet impingement

NASA Technical Reports Server (NTRS)

Johnson, D. C.; Britt, E. J.; Thieme, L. G.

1982-01-01

Of the many factors influencing the performance of a Stirling engine, that of transferring the combustion gas heat into the working fluid is crucial. By utilizing the high heat transfer rates obtainable with a jet impingement heat transfer system, it is possible to reduce the flame temperature required for engine operation. Also, the required amount of heater tube surface area may be reduced, resulting in a decrease in the engine nonswept volume and a related increase in engine efficiency. A jet impingement heat transfer system was designed by Rasor Associates, Inc., and tested in the GPU-3 Stirling engine at the NASA Lewis Research Center. For a small penalty in pumping power (less than 0.5% of engine output) the jet impingement heat transfer system provided a higher combustion-gas-side heat transfer coefficient and a smoothing of heater temperature profiles resulting in lower combustion system temperatures and a 5 to 8% increase in engine power output and efficiency.

Electric propulsion for geostationary orbit insertion

NASA Technical Reports Server (NTRS)

Oleson, Steven R.; Curran, Francis M.; Myers, Roger M.

1995-01-01

Solar electric propulsion (SEP) technology is already being used for geostationary satellite stationkeeping to increase payload mass. By using this same technology to perform part of the orbit transfer additional increases in payload mass can be achieved. Advanced chemical and N2H4 arcjet systems are used to increase the payload mass by performing stationkeeping and part of the orbit transfer. Four mission options are analyzed which show the impact of either sharing the orbit transfer between chemical and SEP systems or having either complete the transfer alone. Results show that for an Atlas 2AS payload increases in net mass (geostationary satellite mass less wet propulsion system mass) of up to 100 kg can be achieved using advanced chemical for the transfer and advanced N2H4 arcjets for stationkeeping. An additional 100 kg can be added using advanced N2H4 arcjets for part of a 40 day orbit transfer.

Fully Printable Organic and Perovskite Solar Cells with Transfer-Printed Flexible Electrodes.

PubMed

Li, Xianqiang; Tang, Xiaohong; Ye, Tao; Wu, Dan; Wang, Hong; Wang, Xizu

2017-06-07

The perovskite solar cells (PSCs) and organic solar cells (OSCs) with high performance were fabricated with transfer-printed top metal electrodes. We have demonstrated that PSCs and OSCs with the top Au electrodes fabricated by using the transfer printing method have comparable or better performance than the devices with the top Au electrodes fabricated by using the conventional thermal evaporation method. The highest PCE of the PSCs and OSCs with the top electrodes fabricated using the transfer printing method achieved 13.72% and 2.35%, respectively. It has been investigated that fewer defects between the organic thin films and Au electrodes exist by using the transfer printing method which improved the device stability. After storing the PSCs and OSCs with the transfer-printed electrodes in a nitrogen environment for 97 and 103 days without encapsulation, the PSCs and OSCs still retained 71% and 91% of their original PCEs, respectively.

Simultaneous Heat and Mass Transfer Model for Convective Drying of Building Material

NASA Astrophysics Data System (ADS)

Upadhyay, Ashwani; Chandramohan, V. P.

2018-04-01

A mathematical model of simultaneous heat and moisture transfer is developed for convective drying of building material. A rectangular brick is considered for sample object. Finite-difference method with semi-implicit scheme is used for solving the transient governing heat and mass transfer equation. Convective boundary condition is used, as the product is exposed in hot air. The heat and mass transfer equations are coupled through diffusion coefficient which is assumed as the function of temperature of the product. Set of algebraic equations are generated through space and time discretization. The discretized algebraic equations are solved by Gauss-Siedel method via iteration. Grid and time independent studies are performed for finding the optimum number of nodal points and time steps respectively. A MATLAB computer code is developed to solve the heat and mass transfer equations simultaneously. Transient heat and mass transfer simulations are performed to find the temperature and moisture distribution inside the brick.

Comparison of VLBI, TV and traveling clock techniques for time transfer

NASA Technical Reports Server (NTRS)

Spencer, J. H.; Waltman, E. B.; Johnston, K. J.; Santini, N. J.; Klepczynski, W. J.; Matsakis, D. N.; Angerhofer, P. E.; Kaplan, G. M.

1982-01-01

A three part experiment was conducted to develop and compare time transfer techniques. The experiment consisted of (1) a very long baseline interferometer (VLBI), (2) a high precision portable clock time transfer system between the two sites, and (3) a television time transfer. A comparison of the VLBI and traveling clock shows each technique can perform satisfactorily at the five nsec level. There was a systematic offset of 59 nsec between the two methods, which we attributed to a difference in epochs between VLBI formatter and station clock. The VLBI method had an internal random error of one nsec at the three sigma level for a two day period. Thus, the Mark II system performed well, and VLBI shows promise of being an accurate method of time transfer. The TV system, which had technical problems during the experiment, transferred time with a random error of about 50 nsec.

Training attentional control in older adults

PubMed Central

MacKay-Brandt, Anna

2013-01-01

Recent research has demonstrated benefits for older adults from training attentional control using a variable priority strategy, but the construct validity of the training task and the degree to which benefits of training transfer to other contexts are unclear. The goal of this study was to characterize baseline performance on the training task in a sample of 105 healthy older adults and to test for transfer of training in a subset (n = 21). Training gains after 5 days and extent of transfer was compared to another subset (n = 20) that served as a control group. Baseline performance on the training task was characterized by a two-factor model of working memory and processing speed. Processing speed correlated with the training task. Training gains in speed and accuracy were reliable and robust (ps <.001, η2 = .57 to .90). Transfer to an analogous task was observed (ps <.05, η2 = .10 to .17). The beneficial effect of training did not translate to improved performance on related measures of processing speed. This study highlights the robust effect of training and transfer to a similar context using a variable priority training task. Although processing speed is an important aspect of the training task, training benefit is either related to an untested aspect of the training task or transfer of training is limited to the training context. PMID:21728889

Silicon on insulator achieved using electrochemical etching

DOEpatents

McCarthy, A.M.

1997-10-07

Bulk crystalline silicon wafers are transferred after the completion of circuit fabrication to form thin films of crystalline circuitry on almost any support, such as metal, semiconductor, plastic, polymer, glass, wood, and paper. In particular, this technique is suitable to form silicon-on-insulator (SOI) wafers, whereby the devices and circuits formed exhibit superior performance after transfer due to the removal of the silicon substrate. The added cost of the transfer process to conventional silicon fabrication is insignificant. No epitaxial, lift-off, release or buried oxide layers are needed to perform the transfer of single or multiple wafers onto support members. The transfer process may be performed at temperatures of 50 C or less, permits transparency around the circuits and does not require post-transfer patterning. Consequently, the technique opens up new avenues for the use of integrated circuit devices in high-brightness, high-resolution video-speed color displays, reduced-thickness increased-flexibility intelligent cards, flexible electronics on ultrathin support members, adhesive electronics, touch screen electronics, items requiring low weight materials, smart cards, intelligent keys for encryption systems, toys, large area circuits, flexible supports, and other applications. The added process flexibility also permits a cheap technique for increasing circuit speed of market driven technologies such as microprocessors at little added expense. 57 figs.

Silicon on insulator achieved using electrochemical etching

DOEpatents

McCarthy, Anthony M.

1997-01-01

Bulk crystalline silicon wafers are transferred after the completion of circuit fabrication to form thin films of crystalline circuitry on almost any support, such as metal, semiconductor, plastic, polymer, glass, wood, and paper. In particular, this technique is suitable to form silicon-on-insulator (SOI) wafers, whereby the devices and circuits formed exhibit superior performance after transfer due to the removal of the silicon substrate. The added cost of the transfer process to conventional silicon fabrication is insignificant. No epitaxial, lift-off, release or buried oxide layers are needed to perform the transfer of single or multiple wafers onto support members. The transfer process may be performed at temperatures of 50.degree. C. or less, permits transparency around the circuits and does not require post-transfer patterning. Consequently, the technique opens up new avenues for the use of integrated circuit devices in high-brightness, high-resolution video-speed color displays, reduced-thickness increased-flexibility intelligent cards, flexible electronics on ultrathin support members, adhesive electronics, touch screen electronics, items requiring low weight materials, smart cards, intelligent keys for encryption systems, toys, large area circuits, flexible supports, and other applications. The added process flexibility also permits a cheap technique for increasing circuit speed of market driven technologies such as microprocessors at little added expense.

A study of Ground Source Heat Pump based on a heat infiltrates coupling model established with FEFLOW

NASA Astrophysics Data System (ADS)

Chen, H.; Hu, C.; Chen, G.; Zhang, Q.

2017-12-01

Geothermal heat is a viable source of energy and its environmental impact in terms of CO2 emissions is significantly lower than conventional fossil fuels. it is vital that engineers acquire a proper understanding about the Ground Source Heat Pump (GSHP). In this study, the model of the borehole exchanger under conduction manners and heat infiltrates coupling manners was established with FEFLOW. The energy efficiency, heat transfer endurance and heat transfer in the unit depth were introduced to quantify the energy efficient and the endurance period. The performance of a the Borehole Exchanger (BHE) in soil with and without groundwater seepage was analyzed of heat transfer process between the soil and the working fluid. Basing on the model, the varied regularity of energy efficiency performance an heat transfer endurance with the conditions including the different configuration of the BHE, the soil properties, thermal load characteristic were discussed. Focus on the heat transfer process in multi-layer soil which one layer exist groundwater flow. And an investigation about thermal dispersivity was also analyzed its influence on heat transfer performance. The final result proves that the model of heat infiltrates coupling model established in this context is reasonable, which can be applied to engineering design.

Contextual determinants of the social-transfer-of-learning effect.

PubMed

Milanese, Nadia; Iani, Cristina; Sebanz, Natalie; Rubichi, Sandro

2011-06-01

A recent study (Milanese et al. in Cogn 116(1):15-22, 2010) showed that performing a spatial compatibility task with incompatible S-R links (i.e., the practice task) alongside a co-actor eliminates the Simon effect in a subsequent joint Simon task (i.e., the transfer task). In the present study, we conducted three experiments to individuate which elements of the practice task need to remain constant for this social-transfer-of-learning to occur. In Experiment 1, participants performed the practice task alongside a co-actor and the Simon task with a different co-actor; in Experiment 2, they performed the practice task alongside a co-actor and the Simon task with the same co-actor after exchanging their seats. Results showed a modulation of the joint Simon effect in Experiment 1 only. In Experiment 2, we found a regular joint Simon effect. These results indicate that, while co-actor identity is not crucial, other elements of the context, such as keeping the same position across tasks, are necessary for the social-transfer-of-learning to occur. On the whole, our data suggest that the social-transfer-of-learning effect is not tuned to a specific co-actor and depends on spatial parameters of the practice and transfer tasks.

Heat Transfer Performances of Pool Boiling on Metal-Graphite Composite Surfaces

NASA Technical Reports Server (NTRS)

Zhang, Nengli; Chao, David F.; Yang, Wen-Jei

2000-01-01

Nucleate boiling, especially near the critical heat flux (CHF), can provide excellent economy along with high efficiency of heat transfer. However, the performance of nucleate boiling may deteriorate in a reduced gravity environment and the nucleate boiling usually has a potentially dangerous characteristic in CHF regime. That is, any slight overload can result in burnout of the boiling surface because the heat transfer will suddenly move into the film-boiling regime. Therefore, enhancement of nucleate boiling heat transfer becomes more important in reduced gravity environments. Enhancing nucleate boiling and critical heat flux can be reached using micro-configured metal-graphite composites as the boiling surface. Thermocapillary force induced by temperature difference between the graphite-fiber tips and the metal matrix, which is independent of gravity, will play an important role in bubble detachment. Thus boiling heat transfer performance does not deteriorate in a reduced-gravity environment. Based on the existing experimental data, and a two-tier theoretical model, correlation formulas are derived for nucleate boiling on the copper-graphite and aluminum-graphite composite surfaces, in both the isolated and coalesced bubble regimes. Experimental studies were performed on nucleate pool boiling of pentane on cooper-graphite (Cu-Gr) and aluminum-graphite (Al-Gr) composite surfaces with various fiber volume concentrations for heat fluxes up to 35 W per square centimeter. It is revealed that a significant enhancement in boiling heat transfer performance on the composite surfaces is achieved, due to the presence of micro-graphite fibers embedded in the matrix. The onset of nucleate boiling (the isolated bubble regime) occurs at wall superheat of about 10 C for the Cu-Gr surface and 15 C for the Al-Gr surface, much lower than their respective pure metal surfaces. Transition from an isolated bubble regime to a coalesced bubble regime in boiling occurs at a superheat of about 14 C on Cu-Gr surface and 19 C on Al-Gr surface.

The Effects of Rhythmicity and Amplitude on Transfer of Motor Learning

PubMed Central

Ben-Tov, Mor; Levy-Tzedek, Shelly; Karniel, Amir

2012-01-01

We perform rhythmic and discrete arm movements on a daily basis, yet the motor control literature is not conclusive regarding the mechanisms controlling these movements; does a single mechanism generate both movement types, or are they controlled by separate mechanisms? A recent study reported partial asymmetric transfer of learning from discrete movements to rhythmic movements. Other studies have shown transfer of learning between large-amplitude to small-amplitude movements. The goal of this study is to explore which aspect is important for learning to be transferred from one type of movement to another: rhythmicity, amplitude or both. We propose two hypotheses: (1) Rhythmic and discrete movements are generated by different mechanisms; therefore we expect to see a partial or no transfer of learning between the two types of movements; (2) Within each movement type (rhythmic/discrete), there will be asymmetric transition of learning from larger movements to smaller ones. We used a learning-transfer paradigm, in which 70 participants performed flexion/extension movements with their forearm, and switched between types of movement, which differed in amplitude and/or rhythmicity. We found partial transfer of learning between discrete and rhythmic movements, and an asymmetric transfer of learning from larger movements to smaller movements (within the same type of movement). Our findings suggest that there are two different mechanisms underlying the generation of rhythmic and discrete arm movements, and that practicing on larger movements helps perform smaller movements; the latter finding might have implications for rehabilitation. PMID:23056549

The effects of rhythmicity and amplitude on transfer of motor learning.

PubMed

Ben-Tov, Mor; Levy-Tzedek, Shelly; Karniel, Amir

2012-01-01

We perform rhythmic and discrete arm movements on a daily basis, yet the motor control literature is not conclusive regarding the mechanisms controlling these movements; does a single mechanism generate both movement types, or are they controlled by separate mechanisms? A recent study reported partial asymmetric transfer of learning from discrete movements to rhythmic movements. Other studies have shown transfer of learning between large-amplitude to small-amplitude movements. The goal of this study is to explore which aspect is important for learning to be transferred from one type of movement to another: rhythmicity, amplitude or both. We propose two hypotheses: (1) Rhythmic and discrete movements are generated by different mechanisms; therefore we expect to see a partial or no transfer of learning between the two types of movements; (2) Within each movement type (rhythmic/discrete), there will be asymmetric transition of learning from larger movements to smaller ones. We used a learning-transfer paradigm, in which 70 participants performed flexion/extension movements with their forearm, and switched between types of movement, which differed in amplitude and/or rhythmicity. We found partial transfer of learning between discrete and rhythmic movements, and an asymmetric transfer of learning from larger movements to smaller movements (within the same type of movement). Our findings suggest that there are two different mechanisms underlying the generation of rhythmic and discrete arm movements, and that practicing on larger movements helps perform smaller movements; the latter finding might have implications for rehabilitation.

The role of oculomotor information in the learning of sequential aiming movements.

PubMed

Helsen, Werner F; Tremblay, Luc; Van Den Berg, Miek; Elliott, Digby

2004-03-01

With their eyes initially on either the home, midline, or final end position, 30 participants practiced a 2-target aiming movement. After 120 acquisition trials, participants performed a retention test and were then transferred to each of the other 2 eye conditions. During acquisition, all groups improved over practice, but the home group showed the greatest improvement. The temporal improvement was most pronounced in the times spent after peak velocity. Retention and transfer tests indicated that participants performed best under eye-movement conditions that were the same as the 1 they had practiced in. There was also positive transfer of training between conditions in which the oculomotor information was similar. Thus, to optimize learning, one should practice under the same afferent and oculomotor conditions that will be required for the final performance.

The application of integral performance criteria to the analysis of discrete maneuvers in a driving simulator

NASA Technical Reports Server (NTRS)

Repa, B. S.; Zucker, R. S.; Wierwille, W. W.

1977-01-01

The influence of vehicle transient response characteristics on driver-vehicle performance in discrete maneuvers as measured by integral performance criteria was investigated. A group of eight ordinary drivers was presented with a series of eight vehicle transfer function configurations in a driving simulator. Performance in two discrete maneuvers was analyzed by means of integral performance criteria. Results are presented.

SCIATRAN 3.1: A new radiative transfer model and retrieval package

NASA Astrophysics Data System (ADS)

Rozanov, Alexei; Rozanov, Vladimir; Kokhanovsky, Alexander; Burrows, John P.

The SCIATRAN 3.1 package is a result of further development of the SCIATRAN 2.X software family which, similar to previous versions, comprises a radiative transfer model and a retrieval block. After an implementation of the vector radiative transfer model in SCIATRAN 3.0 the spectral range covered by the model has been extended into the thermal infrared ranging to approximately 40 micrometers. Another major improvement has been done accounting for the underlying surface effects. Among others, a sophisticated representation of the water surface with a bidirectional reflection distribution function (BRDF) has been implemented accounting for the Fresnel reflection of the polarized light and for the effect of foam. A newly developed representation for a snow surface allows radiative transfer calculations to be performed within an unpolluted or soiled snow layer. Furthermore, a new approach has been implemented allowing radiative transfer calculations to be performed for a coupled atmosphere-ocean system. This means that, the underlying ocean is not considered as a purely reflecting surface any more. Instead, full radiative transfer calculations are performed within the water allowing the user to simulate the radiance within both the atmosphere and the ocean. Similar to previous versions, the simulations can be performed for any viewing geometry typi-cal for atmospheric observations in the UV-Vis-NIR-TIR spectral range (nadir, limb, off-axis, etc.) as well as for any observer location within or outside the Earth's atmosphere including underwater observations. Similar to the precursor version, the new model is freely available for non-commercial use via the web page of the University of Bremen. In this presentation a short description of the software package, especially of the new features of the radiative transfer model is given, including remarks on the availability for the scientific community. Furthermore, some application examples of the radiative transfer model are shown.

Investigation of transfer length, development length, flexural strength, and prestress losses in lightweight prestressed concrete girders.

DOT National Transportation Integrated Search

2003-01-01

Encouraged by the performance of high performance normal weight composite girders, the Virginia Department of Transportation has sought to exploit the use of high performance lightweight composite concrete (HPLWC) girders to achieve economies brought...

Upper limb kinetic analysis of three sitting pivot wheelchair transfer techniques.

PubMed

Koontz, Alicia M; Kankipati, Padmaja; Lin, Yen-Sheng; Cooper, Rory A; Boninger, Michael L

2011-11-01

The objective of this study was to investigate differences in shoulder, elbow and hand kinetics while performing three different SPTs that varied in terms of hand and trunk positioning. Fourteen unimpaired individuals (8 male and 6 female) performed three variations of sitting pivot transfers in a random order from a wheelchair to a level tub bench. Two transfers involved a forward flexed trunk (head-hips technique) and the third with the trunk remaining upright. The two transfers involving a head hips technique were performed with two different leading hand initial positions. Motion analysis equipment recorded upper body movements and force sensors recorded hand reaction forces. Shoulder and elbow joint and hand kinetics were computed for the lift phase of the transfer. Transferring using either of the head hips techniques compared to the trunk upright style of transferring resulted in reduced superior forces at the shoulder (P<0.002), elbow (P<0.004) and hand (P<0.013). There was a significant increase in the medial forces in the leading elbow (P=0.049) for both head hip transfers and the trailing hand for the head hip technique with the arm further away from the body (P<0.028). The head hip techniques resulted in higher shoulder external rotation, flexion and extension moments compared to the trunk upright technique (P<0.021). Varying the hand placement and trunk positioning during transfers changes the load distribution across all upper limb joints. The results of this study may be useful for determining a technique that helps preserve upper limb function overtime. Published by Elsevier Ltd.

Training Transfer: Not the 10% Solution

ERIC Educational Resources Information Center

Farrington, Jeanne

2011-01-01

Training transfer is a key concern for organizational stakeholders, training professionals, and researchers. Since Georgenson's (1982) article on transfer, his conversational gambit that only 10% of training transfers to performance on the job has been quoted often. This estimate suggests a low level of success with training programs in general,…

Flight Simulation for the Study of Skill Transfer.

ERIC Educational Resources Information Center

Lintern, Gavan

1992-01-01

Discusses skill transfer as a human performance issue based on experiences with computerized flight simulators. Highlights include the issue of similarity; simulation and the design of training devices; an information theory of transfer; invariants for flight control; and experiments involving the transfer of flight skills. (21 references) (LRW)

Turnarounds to Transfer: Design beyond the Modes

ERIC Educational Resources Information Center

Eddy, Jennifer

2014-01-01

In "Turnarounds to Transfer," teachers design a collection of tasks toward the summative performance goal but go beyond the Communicative mode criteria: they must assess for transfer. Transfer design criteria must include a complexity or variation that make learners engage critical thinking skills and call upon a repertoire of knowledge…

Heat Transfer in Glass, Aluminum, and Plastic Beverage Bottles

ERIC Educational Resources Information Center

Clark, William M.; Shevlin, Ryan C.; Soffen, Tanya S.

2010-01-01

This paper addresses a controversy regarding the effect of bottle material on the thermal performance of beverage bottles. Experiments and calculations that verify or refute advertising claims and represent an interesting way to teach heat transfer fundamentals are described. Heat transfer coefficients and the resistance to heat transfer offered…

Validation of the VBLaST: A Virtual Peg Transfer Task in Gynecologic Surgeons.

PubMed

Awtrey, Christopher; Chellali, Amine; Schwaitzberg, Steven; De, Suvranu; Jones, Daniel; Cao, Caroline

2015-01-01

To validate the Virtual Basic Laparoscopic Skill Trainer (VBLaST-PT; the peg transfer task) for concurrent validity based on its ability to differentiate between novice, intermediate, and expert groups of gynecologists, and the gynecologists' subjective preference between the physical Fundamentals of Laparoscopic Surgery (FLS) system and the virtual reality system. Prospective study (Canadian Task Force II-2). Academic medical center. Obstetrics and gynecology residents (n = 18) and attending gynecologists (n = 9). Twenty-seven subjects were divided into 3 groups: novices (n = 9), intermediates (n = 9), and experts (n = 9). All subjects performed 10 trials of the peg transfer on each simulator. Assessment of laparoscopic performance was based on FLS scoring, whereas a questionnaire was used for subjective evaluation. The performance scores in the 2 simulators were nearly identical. Experts performed better than intermediates and novices in both the FLS trainer and the VBLAST, and intermediates performed better than novices in both simulators. The results also show a significant learning effect on both trainers for all subgroups; however, the greatest learning effect was in the novice group for both trainers. Subjectively, 74% participants preferred the FLS over the VBLaST for training laparoscopic surgical skills. This study demonstrates that the peg transfer task was reproduced well in the VBLaST in gynecologic surgeons and trainees. The VBLaST has the potential to be a valuable tool in laparoscopic training for gynecologic surgeons. Copyright © 2015 AAGL. Published by Elsevier Inc. All rights reserved.

Mathematical modeling of high and low temperature heat pipes

NASA Technical Reports Server (NTRS)

Chi, S. W.

1971-01-01

Following a review of heat and mass transfer theory relevant to heat pipe performance, math models are developed for calculating heat-transfer limitations of high-temperature heat pipes and heat-transfer limitations and temperature gradient of low temperature heat pipes. Calculated results are compared with the available experimental data from various sources to increase confidence in the present math models. Complete listings of two computer programs for high- and low-temperature heat pipes respectively are included. These programs enable the performance to be predicted of heat pipes with wrapped-screen, rectangular-groove, or screen-covered rectangular-groove wick.

Flexible inorganic light emitting diodes based on semiconductor nanowires

PubMed Central

Guan, Nan; Dai, Xing; Babichev, Andrey V.; Julien, François H.

2017-01-01

The fabrication technologies and the performance of flexible nanowire light emitting diodes (LEDs) are reviewed. We first introduce the existing approaches for flexible LED fabrication, which are dominated by organic technologies, and we briefly discuss the increasing research effort on flexible inorganic LEDs achieved by micro-structuring and transfer of conventional thin films. Then, flexible nanowire-based LEDs are presented and two main fabrication technologies are discussed: direct growth on a flexible substrate and nanowire membrane formation and transfer. The performance of blue, green, white and bi-color flexible LEDs fabricated following the transfer approach is discussed in more detail. PMID:29568439

Thermal finite-element analysis of space shuttle main engine turbine blade

NASA Technical Reports Server (NTRS)

Abdul-Aziz, Ali; Tong, Michael T.; Kaufman, Albert

1987-01-01

Finite-element, transient heat transfer analyses were performed for the first-stage blades of the space shuttle main engine (SSME) high-pressure fuel turbopump. The analyses were based on test engine data provided by Rocketdyne. Heat transfer coefficients were predicted by performing a boundary-layer analysis at steady-state conditions with the STAN5 boundary-layer code. Two different peak-temperature overshoots were evaluated for the startup transient. Cutoff transient conditions were also analyzed. A reduced gas temperature profile based on actual thermocouple data was also considered. Transient heat transfer analyses were conducted with the MARC finite-element computer code.

Electrochemical performance and microbial community profiles in microbial fuel cells in relation to electron transfer mechanisms.

PubMed

Uria, Naroa; Ferrera, Isabel; Mas, Jordi

2017-10-18

Microbial fuel cells (MFCs) operating with complex microbial communities have been extensively reported in the past, and are commonly used in applications such as wastewater treatment, bioremediation or in-situ powering of environmental sensors. However, our knowledge on how the composition of the microbial community and the different types of electron transfer to the anode affect the performance of these bioelectrochemical systems is far from complete. To fill this gap of knowledge, we designed a set of three MFCs with different constrains limiting direct and mediated electron transfer to the anode. The results obtained indicate that MFCs with a naked anode on which a biofilm was allowed unrestricted development (MFC-A) had the most diverse archaeal and bacterial community, and offered the best performance. In this MFC both, direct and mediated electron transfer, occurred simultaneously, but direct electron transfer was the predominant mechanism. Microbial fuel cells in which the anode was enclosed in a dialysis membrane and biofilm was not allowed to develop (MFC-D), had a much lower power output (about 60% lower), and a prevalence of dissolved redox species that acted as putative electron shuttles. In the anolyte of this MFC, Arcobacter and Methanosaeta were the prevalent bacteria and archaea respectively. In the third MFC, in which the anode had been covered by a cation selective nafion membrane (MFC-N), power output decreased a further 5% (95% less than MFC-A). In this MFC, conventional organic electron shuttles could not operate and the low power output obtained was presumably attributed to fermentation end-products produced by some of the organisms present in the anolyte, probably Pseudomonas or Methanosaeta. Electron transfer mechanisms have an impact on the development of different microbial communities and in turn on MFC performance. Although a stable current was achieved in all cases, direct electron transfer MFC showed the best performance concluding that biofilms are the major contributors to current production in MFCs. Characterization of the complex microbial assemblages in these systems may help us to unveil new electrogenic microorganisms and improve our understanding on their role to the functioning of MFCs.

Enhanced surface transfer doping of diamond by V{sub 2}O{sub 5} with improved thermal stability

DOE Office of Scientific and Technical Information (OSTI.GOV)

Crawford, Kevin G., E-mail: k.crawford.2@research.gla.ac.uk; Moran, David A. J.; Cao, Liang

2016-01-25

Surface transfer doping of hydrogen-terminated diamond has been achieved utilising V{sub 2}O{sub 5} as a surface electron accepting material. Contact between the oxide and diamond surface promotes the transfer of electrons from the diamond into the V{sub 2}O{sub 5} as revealed by the synchrotron-based high resolution photoemission spectroscopy. Electrical characterization by Hall measurement performed before and after V{sub 2}O{sub 5} deposition shows an increase in hole carrier concentration in the diamond from 3.0 × 10{sup 12} to 1.8 × 10{sup 13 }cm{sup −2} at room temperature. High temperature Hall measurements performed up to 300 °C in atmosphere reveal greatly enhanced thermal stability of the hole channelmore » produced using V{sub 2}O{sub 5} in comparison with an air-induced surface conduction channel. Transfer doping of hydrogen-terminated diamond using high electron affinity oxides such as V{sub 2}O{sub 5} is a promising approach for achieving thermally stable, high performance diamond based devices in comparison with air-induced surface transfer doping.« less

Distributed deep learning networks among institutions for medical imaging.

PubMed

Chang, Ken; Balachandar, Niranjan; Lam, Carson; Yi, Darvin; Brown, James; Beers, Andrew; Rosen, Bruce; Rubin, Daniel L; Kalpathy-Cramer, Jayashree

2018-03-29

Deep learning has become a promising approach for automated support for clinical diagnosis. When medical data samples are limited, collaboration among multiple institutions is necessary to achieve high algorithm performance. However, sharing patient data often has limitations due to technical, legal, or ethical concerns. In this study, we propose methods of distributing deep learning models as an attractive alternative to sharing patient data. We simulate the distribution of deep learning models across 4 institutions using various training heuristics and compare the results with a deep learning model trained on centrally hosted patient data. The training heuristics investigated include ensembling single institution models, single weight transfer, and cyclical weight transfer. We evaluated these approaches for image classification in 3 independent image collections (retinal fundus photos, mammography, and ImageNet). We find that cyclical weight transfer resulted in a performance that was comparable to that of centrally hosted patient data. We also found that there is an improvement in the performance of cyclical weight transfer heuristic with a high frequency of weight transfer. We show that distributing deep learning models is an effective alternative to sharing patient data. This finding has implications for any collaborative deep learning study.

Hydrodynamics, mass transfer, and yeast culture performance of a column bioreactor with ejector.

PubMed

Prokop, A; Janík, P; Sobotka, M; Krumphanzl, V

1983-04-01

A bubble column fitted with an ejector has been tested for its physical and biological performance. The axial diffusion coefficient of the liquid phase in the presence of electrolytes and ethanol was measured by a stimulus-response technique with subsequent evaluation by means of a diffusion model. In contrast to ordinary bubble columns, the coefficient of axial mixing is inversely dependent on the superficial air velocity. The liquid velocity acts in an opposite direction to the backmixing flow in the column. The measurement of volumetric oxygen transfer coefficient in the presence of electrolytes and ethanol was performed using a dynamic gassing-in method adapted for a column. The data were correlated with the superficial air and liquid velocities, total power input, and power for aeration and mixing; the economy coefficient of oxygen transfer was used for finding an optimum ratio of power for aeration and pumping. Growth experiments with Candida utilis on ethanol confirmed some of the above results. Biomass productivity of 2.5 g L(-1) h(-1) testifies about a good transfer capability of the column. Columns fitted with pneumatic and/or hydraulic energy input may be promising for aerobic fermentations considering their mass transfer and mixing characteristics.

Development of the (d,n) Proton-transfer Reaction in Inverse Kinematics for Structure Studies

NASA Astrophysics Data System (ADS)

Jones, K. L.; Thornsberry, C.; Allen, J.; Atencio, A.; Bardayan, D. W.; Blankstein, D.; Burcher, S.; Carter, A. B.; Chipps, K. A.; Cizewski, J. A.; Cox, I.; Elledge, Z.; Febbraro, M.; Fijałkowska, A.; Grzywacz, R.; Hall, M. R.; King, T. T.; Lepailleur, A.; Madurga, M.; Marley, S. T.; O'Malley, P. D.; Paulauskas, S. V.; Pain, S. D.; Peters, W. A.; Reingold, C.; Smith, K.; Taylor, S.; Tan, W.; Vostinar, M.; Walter, D.

Transfer reactions have provided exciting opportunities to study the structure of exotic nuclei and are often used to inform studies relating to nucleosynthesis and applications. In order to benefit from these reactions and their application to rare ion beams (RIBs) it is necessary to develop the tools and techniques to perform and analyze the data from reactions performed in inverse kinematics, that is with targets of light nuclei and heavier beams. We are continuing to expand the transfer reaction toolbox in preparation for the next generation of facilities, such as the Facility for Rare Ion Beams (FRIB), which is scheduled for completion in 2022. An important step in this process is to perform the (d,n) reaction in inverse kinematics, with analyses that include Q-value spectra and differential cross sections. In this way, proton-transfer reactions can be placed on the same level as the more commonly used neutron-transfer reactions, such as (d,p), (9Be,8Be), and (13C,12C). Here we present an overview of the techniques used in (d,p) and (d,n), and some recent data from (d,n) reactions in inverse kinematics using stable beams of 12C and 16O.

Effect of lubricant on spray evaporation heat transfer performance of R-134a and R-22 in tube bundles

DOE Office of Scientific and Technical Information (OSTI.GOV)

Moeykens, S.A.; Pate, M.B.

1996-11-01

This study evaluates the effects of lubricant on spray evaporation heat transfer performance. Tests were conducted with refrigerant R-134a and triangular-pitch tube bundles made from enhanced-condensation, enhanced-boiling, low-finned, and plain-surface tubes. A 340-SUS polyol-ester (POE) oil was used for the R-134a testing because this lubricant is being integrated into industry for use with this refrigerant. Refrigerant was sprayed onto the tube bundles with low-pressure-drop, wide-angle nozzles located directly above the bundle. Collector testing was conducted with both R-134a and R-22 to determine the percentage of refrigerant contacting the tue bundle. It was found that small concentrations of the polyol-ester lubricantmore » yielded significant improvement in the heat transfer performance of R-134a. The shell-side heat transfer coefficient was more dependent on lubricant concentration than on film-feed supply rate within the range of the respective parameters evaluated in this study. As expected, pure R-22 results show higher heat transfer coefficients than those obtained with pure R-134a at the same saturation temperature of 2.0 C (35.6 F).« less

Training and Transfer of Training in Rapid Visual Search for Camouflaged Targets

PubMed Central

Neider, Mark B.; Ang, Cher Wee; Voss, Michelle W.; Carbonari, Ronald; Kramer, Arthur F.

2013-01-01

Previous examinations of search under camouflage conditions have reported that performance improves with training and that training can engender near perfect transfer to similar, but novel camouflage-type displays [1]. What remains unclear, however, are the cognitive mechanisms underlying these training improvements and transfer benefits. On the one hand, improvements and transfer benefits might be associated with higher-level overt strategy shifts, such as through the restriction of eye movements to target-likely (background) display regions. On the other hand, improvements and benefits might be related to the tuning of lower-level perceptual processes, such as figure-ground segregation. To decouple these competing possibilities we had one group of participants train on camouflage search displays and a control group train on non-camouflage displays. Critically, search displays were rapidly presented, precluding eye movements. Before and following training, all participants completed transfer sessions in which they searched novel displays. We found that search performance on camouflage displays improved with training. Furthermore, participants who trained on camouflage displays suffered no performance costs when searching novel displays following training. Our findings suggest that training to break camouflage is related to the tuning of perceptual mechanisms and not strategic shifts in overt attention. PMID:24386301

Training working memory updating in young adults.

PubMed

Linares, Rocío; Borella, Erika; Lechuga, M Teresa; Carretti, Barbara; Pelegrina, Santiago

2018-05-01

Working memory updating (WMU) is a core mechanism in the human mental architecture and a good predictor of a wide range of cognitive processes. This study analyzed the benefits of two different WMU training procedures, near transfer effects on a working memory measure, and far transfer effects on nonverbal reasoning. Maintenance of any benefits a month later was also assessed. Participants were randomly assigned to: an adaptive training group that performed two numerical WMU tasks during four sessions; a non-adaptive training group that performed the same tasks but on a constant and less demanding level of difficulty; or an active control group that performed other tasks unrelated with working memory. After the training, all three groups showed improvements in most of the tasks, and these benefits were maintained a month later. The gain in one of the two WMU measures was larger for the adaptive and non-adaptive groups than for the control group. This specific gain in a task similar to the one trained would indicate the use of a better strategy for performing the task. Besides this nearest transfer effect, no other transfer effects were found. The adaptability of the training procedure did not produce greater improvements. These results are discussed in terms of the training procedure and the feasibility of training WMU.

The coupling of the neutron transport application RATTLESNAKE to the nuclear fuels performance application BISON under the MOOSE framework

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gleicher, Frederick N.; Williamson, Richard L.; Ortensi, Javier

The MOOSE neutron transport application RATTLESNAKE was coupled to the fuels performance application BISON to provide a higher fidelity tool for fuel performance simulation. This project is motivated by the desire to couple a high fidelity core analysis program (based on the self-adjoint angular flux equations) to a high fidelity fuel performance program, both of which can simulate on unstructured meshes. RATTLESNAKE solves self-adjoint angular flux transport equation and provides a sub-pin level resolution of the multigroup neutron flux with resonance treatment during burnup or a fast transient. BISON solves the coupled thermomechanical equations for the fuel on a sub-millimetermore » scale. Both applications are able to solve their respective systems on aligned and unaligned unstructured finite element meshes. The power density and local burnup was transferred from RATTLESNAKE to BISON with the MOOSE Multiapp transfer system. Multiple depletion cases were run with one-way data transfer from RATTLESNAKE to BISON. The eigenvalues are shown to agree well with values obtained from the lattice physics code DRAGON. The one-way data transfer of power density is shown to agree with the power density obtained from an internal Lassman-style model in BISON.« less

DOE Office of Scientific and Technical Information (OSTI.GOV)

Reshetenko, T. V.; Bender, G.; Bethune, K.

The overall current density that is measured in a proton exchange membrane fuel cell (PEMFC) represents the average of the local reaction rates. The overall and local PEMFC performances are determined by several primary loss mechanisms, namely activation, ohmic, and mass transfer. Spatial performance and loss variabilities are significant and depend on the cell design and operating conditions. A segmented cell system was used to quantify different loss distributions along the gas channel to understand the effects of gas humidification. A reduction in the reactant stream humidification decreased cell performance and resulted in non-uniform distributions of overpotentials and performance alongmore » the flow field. Activation and ohmic overpotentials increased with a relative humidity decrease due to insufficient membrane and catalyst layer hydration. The relative humidity of the cathode had a strong impact on the mass transfer overpotential due to a lower oxygen permeability through the dry Nafion film covering the catalyst surface. The mass transfer loss distribution was non-uniform, and the mass transfer overpotential increased for the outlet segments due to the oxygen consumption at the inlet segments, which reduced the oxygen concentration downstream, and a progressive water accumulation from upstream segments. Electrochemical impedance spectroscopy (EIS) and an equivalent electric circuit (EEC) facilitated the analysis and interpretation of the segmented cell data.« less

Data center coolant switch

DOEpatents

Iyengar, Madhusudan K.; Parida, Pritish R.; Schultz, Mark D.

2015-10-06

A data center cooling system is operated in a first mode; it has an indoor portion wherein heat is absorbed from components in the data center, and an outdoor heat exchanger portion wherein outside air is used to cool a first heat transfer fluid (e.g., water) present in at least the outdoor heat exchanger portion of the cooling system during the first mode. The first heat transfer fluid is a relatively high performance heat transfer fluid (as compared to the second fluid), and has a first heat transfer fluid freezing point. A determination is made that an appropriate time has been reached to switch from the first mode to a second mode. Based on this determination, the outdoor heat exchanger portion of the data cooling system is switched to a second heat transfer fluid, which is a relatively low performance heat transfer fluid, as compared to the first heat transfer fluid. It has a second heat transfer fluid freezing point lower than the first heat transfer fluid freezing point, and the second heat transfer fluid freezing point is sufficiently low to operate without freezing when the outdoor air temperature drops below a first predetermined relationship with the first heat transfer fluid freezing point.

Longitudinal Study of Reproductive Performance of Female Cattle Produced by Somatic Cell Nuclear Transfer

PubMed Central

Polejaeva, Irina A.; Broek, Diane M.; Walker, Shawn C.; Zhou, Wenli; Walton, Mark; Benninghoff, Abby D.; Faber, David C.

2013-01-01

The objective of this study was to determine whether or not reproductive performance in cattle produced by somatic cell nuclear transfer (SCNT) is significantly different from that of their genetic donors. To address this question, we directed two longitudinal studies using different embryo production procedures: (1) superovulation followed by artificial insemination (AI) and embryo collection and (2) ultrasound-guided ovum pick-up followed by in vitro fertilization (OPU-IVF). Collectively, these two studies represent the largest data set available for any species on the reproductive performance of female clones and their genetic donors as measured by their embryo production outcomes in commercial embryo production program. The large-scale study described herein was conducted over a six-year period of time and provides a unique comparison of 96 clones to the 40 corresponding genetic donors. To our knowledge, this is the first longitudinal study on the reproductive performance of cattle clones using OPU-IVF. With nearly 2,000 reproductive procedures performed and more than 9,200 transferable embryos produced, our observations show that the reproductive performance of cattle produced by SCNT is not different compared to their genetic donors for the production of transferable embryos after either AI followed by embryo collection (P = 0.77) or OPU-IVF (P = 0.97). These data are in agreement with previous reports showing that the reproductive capabilities of cloned cattle are equal to that of conventionally produced cattle. In conclusion, results of this longitudinal study once again demonstrate that cloning technology, in combination with superovulation, AI and embryo collection or OPU-IVF, provides a valuable tool for faster dissemination of superior maternal genetics. PMID:24391930

Longitudinal study of reproductive performance of female cattle produced by somatic cell nuclear transfer.

PubMed

Polejaeva, Irina A; Broek, Diane M; Walker, Shawn C; Zhou, Wenli; Walton, Mark; Benninghoff, Abby D; Faber, David C

2013-01-01

The objective of this study was to determine whether or not reproductive performance in cattle produced by somatic cell nuclear transfer (SCNT) is significantly different from that of their genetic donors. To address this question, we directed two longitudinal studies using different embryo production procedures: (1) superovulation followed by artificial insemination (AI) and embryo collection and (2) ultrasound-guided ovum pick-up followed by in vitro fertilization (OPU-IVF). Collectively, these two studies represent the largest data set available for any species on the reproductive performance of female clones and their genetic donors as measured by their embryo production outcomes in commercial embryo production program. The large-scale study described herein was conducted over a six-year period of time and provides a unique comparison of 96 clones to the 40 corresponding genetic donors. To our knowledge, this is the first longitudinal study on the reproductive performance of cattle clones using OPU-IVF. With nearly 2,000 reproductive procedures performed and more than 9,200 transferable embryos produced, our observations show that the reproductive performance of cattle produced by SCNT is not different compared to their genetic donors for the production of transferable embryos after either AI followed by embryo collection (P = 0.77) or OPU-IVF (P = 0.97). These data are in agreement with previous reports showing that the reproductive capabilities of cloned cattle are equal to that of conventionally produced cattle. In conclusion, results of this longitudinal study once again demonstrate that cloning technology, in combination with superovulation, AI and embryo collection or OPU-IVF, provides a valuable tool for faster dissemination of superior maternal genetics.

High-performance ternary blend polymer solar cells involving both energy transfer and hole relay processes.

PubMed

Lu, Luyao; Chen, Wei; Xu, Tao; Yu, Luping

2015-06-04

The integration of multiple materials with complementary absorptions into a single junction device is regarded as an efficient way to enhance the power conversion efficiency (PCE) of organic solar cells (OSCs). However, because of increased complexity with one more component, only limited high-performance ternary systems have been demonstrated previously. Here we report an efficient ternary blend OSC with a PCE of 9.2%. We show that the third component can reduce surface trap densities in the ternary blend. Detailed studies unravel that the improved performance results from synergistic effects of enlarged open circuit voltage, suppressed trap-assisted recombination, enhanced light absorption, increased hole extraction, efficient energy transfer and better morphology. The working mechanism and high device performance demonstrate new insights and design guidelines for high-performance ternary blend solar cells and suggest that ternary structure is a promising platform to boost the efficiency of OSCs.

[Inductive reasoning and intelligence test performance--analysis of the manner of the effect of 2 thought training methods for children].

PubMed

Hager, W; Hasselhorn, M; Hübner, S

1995-10-01

For his training programs of inductive reasoning Klauer postulates a transfer effect to inductive thinking as well as to (performance in tests of) intelligence. As evidence for these claims, however, he uses the same data. That means the same tests are used to prove enhancement of inductive thinking and to prove transfer to performance in tests of intelligence. Moreover, Klauer's claim to train inductive thinking is criticized since better performances in at least some of the tests he administers can result due to enhancements in the area of visual perception. Finally, we ask what kind of effects the programs result in: Are they mere coaching effects or do the programs result in better performance due to enhanced competencies? The empirical evidence suggest that positive effects on inductive thinking do not last as long as perceptual competencies that are necessarily fostered when visual material is presented to children.

Selecting Tasks for Evaluating Human Performance as a Function of Gravity

NASA Technical Reports Server (NTRS)

Norcross, J. R.; Gernhardt, M. L.

2010-01-01

A challenge in understanding human performance as a function of gravity is determining which tasks to research. Initial studies began with treadmill walking, which was easy to quantify and control. However, with the development of pressurized rovers, it is less important to optimize human performance for ambulation as rovers will likely perform gross translation for them. Future crews are likely to spend much of their extravehicular activity (EVA) performing geology, construction and maintenance type tasks, for which it is difficult to measure steady-state-workloads. To evaluate human performance in reduced gravity, we have collected metabolic, biomechanical and subjective data for different tasks at varied gravity levels. Methods: Ten subjects completed 5 different tasks including weight transfer, shoveling, treadmill walking, treadmill running and treadmill incline walking. All tasks were performed shirt-sleeved at 1-g, 3/8-g and 1/6-g. Off-loaded conditions were achieved via the Active Response Gravity Offload System. Treadmill tasks were performed for 3 minutes with reported oxygen consumption (VO2) averaged over the last 2 minutes. Shoveling was performed for 3 minutes with metabolic cost reported as ml O2 consumed per kg material shoveled. Weight transfer reports metabolic cost as liters O2 consumed to complete the task. Statistical analysis was performed via repeated measures ANOVA. Results: Statistically significant metabolic differences were noted between all 3 gravity levels for treadmill running and incline walking. For the other 3 tasks, there were significant differences between 1-g and each reduced gravity, but not between 1/6-g and 3/8-g. For weight transfer, significant differences were seen between gravities in both trial-average VO2 and time-to-completion with noted differences in strategy for task completion. Conclusion: To determine if gravity has a metabolic effect on human performance, this research may indicate that tasks should be selected that require the subject to work vertically against the force of gravity.

Preventing a Relapse or Setting Goals? Elucidating the Impact of Post-Training Transfer Interventions on Training Transfer Performance

ERIC Educational Resources Information Center

Rahyuda, Agoes Ganesha; Soltani, Ebrahim; Syed, Jawad

2018-01-01

Based on a review of the literature on post-training transfer interventions, this paper offers a conceptual model that elucidates potential mechanisms through which two types of post-training transfer intervention (relapse prevention and proximal plus distal goal setting) influence the transfer of training. We explain how the application of…

Quantifying Contextual Interference and Its Effect on Skill Transfer in Skilled Youth Tennis Players

PubMed Central

Buszard, Tim; Reid, Machar; Krause, Lyndon; Kovalchik, Stephanie; Farrow, Damian

2017-01-01

The contextual interference effect is a well-established motor learning phenomenon. Most of the contextual interference effect literature has addressed simple skills, while less is known about the role of contextual interference in complex sport skill practice, particularly with respect to skilled performers. The purpose of this study was to assess contextual interference when practicing the tennis serve. Study 1 evaluated tennis serve practice of nine skilled youth tennis players using a novel statistical metric developed specifically to measure between-skill and within-skill variability as sources of contextual interference. This metric highlighted that skilled tennis players typically engaged in serve practice that featured low contextual interference. In Study 2, 16 skilled youth tennis players participated in 10 practice sessions that aimed to improve serving “down the T.” Participants were stratified into a low contextual interference practice group (Low CI) and a moderate contextual interference practice group (Moderate CI). Pre- and post-tests were conducted 1 week before and 1 week after the practice period. Testing involved a skill test, which assessed serving performance in a closed setting, and a transfer test, which assessed serving performance in a match-play setting. No significant contextual interference differences were observed with respect to practice performance. However, analysis of pre- and post-test serve performance revealed significant Group × Time interactions. The Moderate CI group showed no change in serving performance (service displacement from the T) from pre- to post-test in the skill test, but did display improvements in the transfer test. Conversely, the Low CI group improved serving performance (service displacement from the T) in the skill test but not the transfer test. Results suggest that the typical contextual interference effect is less clear when practicing a complex motor skill, at least with the tennis serve skill evaluated here. We encourage researchers and applied sport scientists to use our statistical metric to measure contextual interference. PMID:29163306

Degree of Handedness Affects Intermanual Transfer of Skill Learning

PubMed Central

Chase, Cori; Seidler, Rachael

2008-01-01

Intermanual transfer of skill learning has often been used as a paradigm to study functional specialization and hemispheric interactions in relation to handedness. This literature has not evaluated whether degree of handedness impacts learning and intermanual transfer. Because handedness scores are related to factors that might influence intermanual transfer, such as engagement of the ipsilateral hemisphere during movement and corpus callosum volume, we tested whether degree of handedness is correlated with transfer magnitude. We had groups of left and right handed participants perform a sensorimotor adaptation task and a sequence learning task. Following learning with either the dominant or nondominant hand, participants transferred to task performance with the other hand. We evaluated whether the magnitude of learning and intermanual transfer were influenced by either direction and / or degree of handedness. Participants exhibited faster sensorimotor adaptation with the right hand, regardless of whether they were right or left handed. In addition, less strongly left handed individuals exhibited better intermanual transfer of sensorimotor adaptation, while less strongly right handed individuals exhibited better intermanual transfer of sequence learning. The findings suggest that involvement of the ipsilateral hemisphere during learning may influence intermanual transfer magnitude. PMID:18592225

Near field wireless power transfer using curved relay resonators for extended transfer distance

NASA Astrophysics Data System (ADS)

Zhu, D.; Clare, L.; Stark, B. H.; Beeby, S. P.

2015-12-01

This paper investigates the performance of a near field wireless power transfer system that uses curved relay resonator to extend transfer distance. Near field wireless power transfer operates based on the near-field electromagnetic coupling of coils. Such a system can transfer energy over a relatively short distance which is of the same order of dimensions of the coupled coils. The energy transfer distance can be increased using flat relay resonators. Recent developments in printing electronics and e-textiles have seen increasing demand of embedding electronics into fabrics. Near field wireless power transfer is one of the most promising methods to power electronics on fabrics. The concept can be applied to body-worn textiles by, for example, integrating a transmitter coil into upholstery, and a flexible receiver coil into garments. Flexible textile coils take on the shape of the supporting materials such as garments, and therefore curved resonator and receiver coils are investigated in this work. Experimental results showed that using curved relay resonator can effectively extend the wireless power transfer distance. However, as the curvature of the coil increases, the performance of the wireless power transfer, especially the maximum received power, deteriorates.

Aerodynamics and thermal physics of helicopter ice accretion

NASA Astrophysics Data System (ADS)

Han, Yiqiang

Ice accretion on aircraft introduces significant loss in airfoil performance. Reduced lift-to- drag ratio reduces the vehicle capability to maintain altitude and also limits its maneuverability. Current ice accretion performance degradation modeling approaches are calibrated only to a limited envelope of liquid water content, impact velocity, temperature, and water droplet size; consequently inaccurate aerodynamic performance degradations are estimated. The reduced ice accretion prediction capabilities in the glaze ice regime are primarily due to a lack of knowledge of surface roughness induced by ice accretion. A comprehensive understanding of the ice roughness effects on airfoil heat transfer, ice accretion shapes, and ultimately aerodynamics performance is critical for the design of ice protection systems. Surface roughness effects on both heat transfer and aerodynamic performance degradation on airfoils have been experimentally evaluated. Novel techniques, such as ice molding and casting methods and transient heat transfer measurement using non-intrusive thermal imaging methods, were developed at the Adverse Environment Rotor Test Stand (AERTS) facility at Penn State. A novel heat transfer scaling method specifically for turbulent flow regime was also conceived. A heat transfer scaling parameter, labeled as Coefficient of Stanton and Reynolds Number (CSR = Stx/Rex --0.2), has been validated against reference data found in the literature for rough flat plates with Reynolds number (Re) up to 1x107, for rough cylinders with Re ranging from 3x104 to 4x106, and for turbine blades with Re from 7.5x105 to 7x106. This is the first time that the effect of Reynolds number is shown to be successfully eliminated on heat transfer magnitudes measured on rough surfaces. Analytical models for ice roughness distribution, heat transfer prediction, and aerodynamics performance degradation due to ice accretion have also been developed. The ice roughness prediction model was developed based on a set of 82 experimental measurements and also compared to existing predictions tools. Two reference predictions found in the literature yielded 76% and 54% discrepancy with respect to experimental testing, whereas the proposed ice roughness prediction model resulted in a 31% minimum accuracy in prediction. It must be noted that the accuracy of the proposed model is within the ice shape reproduction uncertainty of icing facilities. Based on the new ice roughness prediction model and the CSR heat transfer scaling method, an icing heat transfer model was developed. The approach achieved high accuracy in heat transfer prediction compared to experiments conducted at the AERTS facility. The discrepancy between predictions and experimental results was within +/-15%, which was within the measurement uncertainty range of the facility. By combining both the ice roughness and heat transfer predictions, and incorporating the modules into an existing ice prediction tool (LEWICE), improved prediction capability was obtained, especially for the glaze regime. With the available ice shapes accreted at the AERTS facility and additional experiments found in the literature, 490 sets of experimental ice shapes and corresponding aerodynamics testing data were available. A physics-based performance degradation empirical tool was developed and achieved a mean absolute deviation of 33% when compared to the entire experimental dataset, whereas 60% to 243% discrepancies were observed using legacy drag penalty prediction tools. Rotor torque predictions coupling Blade Element Momentum Theory and the proposed drag performance degradation tool was conducted on a total of 17 validation cases. The coupled prediction tool achieved a 10% predicting error for clean rotor conditions, and 16% error for iced rotor conditions. It was shown that additional roughness element could affect the measured drag by up to 25% during experimental testing, emphasizing the need of realistic ice structures during aerodynamics modeling and testing for ice accretion.

24 CFR 3500.21 - Mortgage servicing transfers.

Code of Federal Regulations, 2011 CFR

2011-04-01

.... (a) Definitions. As used in this section: Master servicer means the owner of the right to perform... this section. Subservicer means a servicer who does not own the right to perform servicing, but who... obtain the right to perform servicing functions pursuant to an agreement or understanding. Transferor...

24 CFR 3500.21 - Mortgage servicing transfers.

Code of Federal Regulations, 2012 CFR

2012-04-01

.... (a) Definitions. As used in this section: Master servicer means the owner of the right to perform... this section. Subservicer means a servicer who does not own the right to perform servicing, but who... obtain the right to perform servicing functions pursuant to an agreement or understanding. Transferor...

5 CFR 293.404 - Retention schedule.

Code of Federal Regulations, 2013 CFR

2013-01-01

... RECORDS Employee Performance File System Records § 293.404 Retention schedule. (a)(1) Except as provided... in this system, including transfer with the employee who changes positions, shall be as agencies... performance-related documents five years old or less shall be forwarded in the Employee Performance File along...

5 CFR 293.404 - Retention schedule.

Code of Federal Regulations, 2014 CFR

2014-01-01

... RECORDS Employee Performance File System Records § 293.404 Retention schedule. (a)(1) Except as provided... in this system, including transfer with the employee who changes positions, shall be as agencies... performance-related documents five years old or less shall be forwarded in the Employee Performance File along...

5 CFR 293.404 - Retention schedule.

Code of Federal Regulations, 2011 CFR

2011-01-01

... RECORDS Employee Performance File System Records § 293.404 Retention schedule. (a)(1) Except as provided... in this system, including transfer with the employee who changes positions, shall be as agencies... performance-related documents five years old or less shall be forwarded in the Employee Performance File along...

5 CFR 293.404 - Retention schedule.

Code of Federal Regulations, 2012 CFR

2012-01-01

... RECORDS Employee Performance File System Records § 293.404 Retention schedule. (a)(1) Except as provided... in this system, including transfer with the employee who changes positions, shall be as agencies... performance-related documents five years old or less shall be forwarded in the Employee Performance File along...

Student Perceptions and Social Comparisons and Performance Expectancy.

ERIC Educational Resources Information Center

Holahan, Carole K.; And Others

Student self-expectations are believed to exert a powerful influence on performance. Student perceptions and social comparisons during transfer students' (N=1362) first semester in a large state university were examined to determine variables that might be related to the formation of student performance expectations. Subjects completed…

7 CFR 331.16 - Transfers.

Code of Federal Regulations, 2014 CFR

2014-01-01

... or CDC prior to the transfer. 7 7 The requirements of this section do not apply to transfers within a... authorization for a transfer, APHIS/CDC Form 2 must be submitted. (e) After authorization is provided by APHIS or CDC, the packaging of the select agent(s) and toxin(s) is performed by an individual approved by...

7 CFR 331.16 - Transfers.

Code of Federal Regulations, 2013 CFR

2013-01-01

... or CDC prior to the transfer. 7 7 The requirements of this section do not apply to transfers within a... authorization for a transfer, APHIS/CDC Form 2 must be submitted. (e) After authorization is provided by APHIS or CDC, the packaging of the select agent(s) and toxin(s) is performed by an individual approved by...

Evaluation of a GPS Receiver for Code and Carrier-Phase Time and Frequency Transfer

DTIC Science & Technology

2010-11-01

2], and carrier-phase [3]. NIST also employs GPS time transfer as the backup link to Two Way Satellite Time and Frequency Transfer ( TWSTFT ) [4...4] D. Kirchner, 1999, “Two-Way Satellite Time and Frequency Transfer ( TWSTFT ): Principle, Implementation, and Current Performance,” Review of

MSR performance enhancements and modifications at St. Lucie Power Plant

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rubano, V.F.; Ugelow, A.G.; Menocal, A.G.

1989-01-01

The St. Lucie Power Plant provides an excellent historical prospective on various moisture separator/reheater improvements. Between the two essentially identical units there is a total of 14 years of operating experience with various moisture separator/reheater configurations, with a combination of four different heat transfer surfaces and three moisture removal configurations. Through various modifications and enhancements, the performance and the reliability of the moisture separator/reheaters at the St. Lucie Power Plant and consequently the overall plant performance has been improved. This improvement has taken place over several years and involves changes in both the heat transfer and moisture removal areas. Thismore » paper provides an overview of the history and description of moisture separator/reheater modifications at the St. Lucie Power Plant with the resulting performance improvements.« less

Direct synthesis of vertically aligned ZnO nanowires on FTO substrates using a CVD method and the improvement of photovoltaic performance

PubMed Central

2012-01-01

In this work, we report a direct synthesis of vertically aligned ZnO nanowires on fluorine-doped tin oxide-coated substrates using the chemical vapor deposition (CVD) method. ZnO nanowires with a length of more than 30 μm were synthesized, and dye-sensitized solar cells (DSSCs) based on the as-grown nanowires were fabricated, which showed improvement of the device performance compared to those fabricated using transferred ZnO nanowires. Dependence of the cell performance on nanowire length and annealing temperature was also examined. This synthesis method provided a straightforward, one-step CVD process to grow relatively long ZnO nanowires and avoided subsequent nanowire transfer process, which simplified DSSC fabrication and improved cell performance. PMID:22673046

Explicit instruction of rules interferes with visuomotor skill transfer.

PubMed

Tanaka, Kanji; Watanabe, Katsumi

2017-06-01

In the present study, we examined the effects of explicit knowledge, obtained through instruction or spontaneous detection, on the transfer of visuomotor sequence learning. In the learning session, participants learned a visuomotor sequence, via trial and error. In the transfer session, the order of the sequence was reversed from that of the learning session. Before the commencement of the transfer session, some participants received explicit instruction regarding the reversal rule (i.e., Instruction group), while the others did not receive any information and were sorted into either an Aware or Unaware group, as assessed by interview conducted after the transfer session. Participants in the Instruction and Aware groups performed with fewer errors than the Unaware group in the transfer session. The participants in the Instruction group showed slower speed than the Aware and Unaware groups in the transfer session, and the sluggishness likely persisted even in late learning. These results suggest that explicit knowledge reduces errors in visuomotor skill transfer, but may interfere with performance speed, particularly when explicit knowledge is provided, as opposed to being spontaneously discovered.

A digital computer simulation and study of a direct-energy-transfer power-conditioning system

NASA Technical Reports Server (NTRS)

Burns, W. W., III; Owen, H. A., Jr.; Wilson, T. G.; Rodriguez, G. E.; Paulkovich, J.

1974-01-01

A digital computer simulation technique, which can be used to study such composite power-conditioning systems, was applied to a spacecraft direct-energy-transfer power-processing system. The results obtained duplicate actual system performance with considerable accuracy. The validity of the approach and its usefulness in studying various aspects of system performance such as steady-state characteristics and transient responses to severely varying operating conditions are demonstrated experimentally.

CCD radiation damage in ESA Cosmic Visions missions: assessment and mitigation

NASA Astrophysics Data System (ADS)

Lumb, David H.

2009-08-01

Charge Coupled Device (CCD) imagers have been widely used in space-borne astronomical instruments. A frequent concern has been the radiation damage effects on the CCD charge transfer properties. We review some methods for assessing the Charge Transfer Inefficiency (CTI) in CCDs. Techniques to minimise degradation using background charge injection and p-channel CCD architectures are discussed. A critical review of the claims for p-channel architectures is presented. The performance advantage for p-channel CCD performance is shown to be lower than claimed previously. Finally we present some projections for the performance in the context of some future ESA missions.

A high performance linear equation solver on the VPP500 parallel supercomputer

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nakanishi, Makoto; Ina, Hiroshi; Miura, Kenichi

1994-12-31

This paper describes the implementation of two high performance linear equation solvers developed for the Fujitsu VPP500, a distributed memory parallel supercomputer system. The solvers take advantage of the key architectural features of VPP500--(1) scalability for an arbitrary number of processors up to 222 processors, (2) flexible data transfer among processors provided by a crossbar interconnection network, (3) vector processing capability on each processor, and (4) overlapped computation and transfer. The general linear equation solver based on the blocked LU decomposition method achieves 120.0 GFLOPS performance with 100 processors in the LIN-PACK Highly Parallel Computing benchmark.

Usability Laboratory Test of a Novel Mobile Homecare Application with Experienced Home Help Service Staff

PubMed Central

Scandurra, I; Hägglund, M; Koch, S; Lind, M

2008-01-01

Using participatory design, we developed and deployed a mobile Virtual Health Record (VHR) on a personal digital assistant (PDA) together with experienced homecare staff. To assess transferability to a second setting and usability when used by novice users with limited system education the application was tested in a usability lab. Eight participants from another homecare district performed tasks related to daily homecare work using the VHR. Test protocols were analyzed with regard to effectiveness, potential usability problems and user satisfaction. Usability problems having impact on system performance and contextual factors affecting system transferability were uncovered. Questionnaires revealed that the participants frequently used computers, but never PDAs. Surprisingly there were only minor differences in input efficiency between novice and experienced users. The participants were overall satisfied with the application. However, transfer to another district can not be performed, unless by means of careful field observations of contextual differences. PMID:19415140

Video-task assessment of learning and memory in Macaques (Macaca mulatta) - Effects of stimulus movement on performance

NASA Technical Reports Server (NTRS)

Washburn, David A.; Hopkins, William D.; Rumbaugh, Duane M.

1989-01-01

Effects of stimulus movement on learning, transfer, matching, and short-term memory performance were assessed with 2 monkeys using a video-task paradigm in which the animals responded to computer-generated images by manipulating a joystick. Performance on tests of learning set, transfer index, matching to sample, and delayed matching to sample in the video-task paradigm was comparable to that obtained in previous investigations using the Wisconsin General Testing Apparatus. Additionally, learning, transfer, and matching were reliably and significantly better when the stimuli or discriminanda moved than when the stimuli were stationary. External manipulations such as stimulus movement may increase attention to the demands of a task, which in turn should increase the efficiency of learning. These findings have implications for the investigation of learning in other populations, as well as for the application of the video-task paradigm to comparative study.

Prediction of alpha factor values for fine pore aeration systems.

PubMed

Gillot, S; Héduit, A

2008-01-01

The objective of this work was to analyse the impact of different geometric and operating parameters on the alpha factor value for fine bubble aeration systems equipped with EPDM membrane diffusers. Measurements have been performed on nitrifying plants operating under extended aeration and treating mainly domestic wastewater. Measurements performed on 14 nitrifying plants showed that, for domestic wastewater treatment under very low F/M ratios, the alpha factor is comprised between 0.44 and 0.98. A new composite variable (the Equivalent Contact Time, ECT) has been defined and makes it possible for a given aeration tank, knowing the MCRT, the clean water oxygen transfer coefficient and the supplied air flow rate, to predict the alpha factor value. ECT combines the effect on mass transfer of all generally accepted factors affecting oxygen transfer performances (air flow rate, diffuser submergence, horizontal flow). (c) IWA Publishing 2008.

Heat transfer and pressure drop measurements in prototypic heat exchanges for the supercritical carbon dioxide Brayton power cycles

NASA Astrophysics Data System (ADS)

Kruizenga, Alan Michael

An experimental facility was built to perform heat transfer and pressure drop measurements in supercritical carbon dioxide. Inlet temperatures ranged from 30--125 °C with mass velocities ranging from 118--1050 kg/m2s and system pressures of 7.5--10.2 MPa. Tests were performed in horizontal, upward, and downward flow conditions to test the influence of buoyancy forces on the heat transfer. Horizontal tests showed that for system pressures of 8.1 MPa and up standard Nusselt correlations predicted the heat transfer behavior with good agreement. Tests performed at 7.5 MPa were not well predicted by existing correlations, due to large property variations. The data collected in this work can be used to better understand heat transfer near the critical point. The CFD package FLUENT was found to yield adequate prediction for the heat transfer behavior for low pressure cases, where standard correlations were inaccurate, however it was necessary to have fine mesh spacing (y+˜1) in order to capture the observed behavior. Vertical tests found, under the test conditions considered, that flow orientation had little or no effect on the heat transfer behavior, even in flow regions where buoyancy forces should result in a difference between up and down flow heat transfer. CFD results found that for a given set of boundary conditions a large increase in the gravitational acceleration could cause noticeable heat transfer deterioration. Studies performed with CFD further led to the hypothesis that typical buoyancy induced heat transfer deterioration exhibited in supercritical flows were mitigated through a complex interaction with the inertial force, which is caused by bulk cooling of the flow. This hypothesis to explain the observed data requires further investigation. Prototypic heat exchangers channels (i.e. zig-zag) proved that the heat transfer coefficient was consistently three to four times higher as compared to straight channel geometry. However, the form pressure loss due to the presence of the corners within the channels caused an increase in pressure drop by four to five times the pressure drop measured in the straight channel. Based on the results, more innovative geometries were recommended for future testing to reduce form losses found in the typical prototypic geometries.

Data Transfer Study HPSS Archiving

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wynne, James; Parete-Koon, Suzanne T; Mitchell, Quinn

2015-01-01

The movement of the large amounts of data produced by codes run in a High Performance Computing (HPC) environment can be a bottleneck for project workflows. To balance filesystem capacity and performance requirements, HPC centers enforce data management policies to purge old files to make room for new computation and analysis results. Users at Oak Ridge Leadership Computing Facility (OLCF) and many other HPC user facilities must archive data to avoid data loss during purges, therefore the time associated with data movement for archiving is something that all users must consider. This study observed the difference in transfer speed frommore » the originating location on the Lustre filesystem to the more permanent High Performance Storage System (HPSS). The tests were done with a number of different transfer methods for files that spanned a variety of sizes and compositions that reflect OLCF user data. This data will be used to help users of Titan and other Cray supercomputers plan their workflow and data transfers so that they are most efficient for their project. We will also discuss best practice for maintaining data at shared user facilities.« less

Lossless data compression for improving the performance of a GPU-based beamformer.

PubMed

Lok, U-Wai; Fan, Gang-Wei; Li, Pai-Chi

2015-04-01

The powerful parallel computation ability of a graphics processing unit (GPU) makes it feasible to perform dynamic receive beamforming However, a real time GPU-based beamformer requires high data rate to transfer radio-frequency (RF) data from hardware to software memory, as well as from central processing unit (CPU) to GPU memory. There are data compression methods (e.g. Joint Photographic Experts Group (JPEG)) available for the hardware front end to reduce data size, alleviating the data transfer requirement of the hardware interface. Nevertheless, the required decoding time may even be larger than the transmission time of its original data, in turn degrading the overall performance of the GPU-based beamformer. This article proposes and implements a lossless compression-decompression algorithm, which enables in parallel compression and decompression of data. By this means, the data transfer requirement of hardware interface and the transmission time of CPU to GPU data transfers are reduced, without sacrificing image quality. In simulation results, the compression ratio reached around 1.7. The encoder design of our lossless compression approach requires low hardware resources and reasonable latency in a field programmable gate array. In addition, the transmission time of transferring data from CPU to GPU with the parallel decoding process improved by threefold, as compared with transferring original uncompressed data. These results show that our proposed lossless compression plus parallel decoder approach not only mitigate the transmission bandwidth requirement to transfer data from hardware front end to software system but also reduce the transmission time for CPU to GPU data transfer. © The Author(s) 2014.

Contexts, concepts and cognition: principles for the transfer of basic science knowledge.

PubMed

Kulasegaram, Kulamakan M; Chaudhary, Zarah; Woods, Nicole; Dore, Kelly; Neville, Alan; Norman, Geoffrey

2017-02-01

Transfer of basic science aids novices in the development of clinical reasoning. The literature suggests that although transfer is often difficult for novices, it can be optimised by two complementary strategies: (i) focusing learners on conceptual knowledge of basic science or (ii) exposing learners to multiple contexts in which the basic science concepts may apply. The relative efficacy of each strategy as well as the mechanisms that facilitate transfer are unknown. In two sequential experiments, we compared both strategies and explored mechanistic changes in how learners address new transfer problems. Experiment 1 was a 2 × 3 design in which participants were randomised to learn three physiology concepts with or without emphasis on the conceptual structure of basic science via illustrative analogies and by means of one, two or three contexts during practice (operationalised as organ systems). Transfer of these concepts to explain pathologies in familiar organ systems (near transfer) and unfamiliar organ systems (far transfer) was evaluated during immediate and delayed testing. Experiment 2 examined whether exposure to conceptual analogies and multiple contexts changed how learners classified new problems. Experiment 1 showed that increasing context variation significantly improved far transfer performance but there was no difference between two and three contexts during practice. Similarly, the increased conceptual analogies led to higher performance for far transfer. Both interventions had independent but additive effects on overall performance. Experiment 2 showed that such analogies and context variation caused learners to shift to using structural characteristics to classify new problems even when there was superficial similarity to previous examples. Understanding problems based on conceptual structural characteristics is necessary for successful transfer. Transfer of basic science can be optimised by using multiple strategies that collectively emphasise conceptual structure. This means teaching must focus on conserved basic science knowledge and de-emphasise superficial features. © 2017 John Wiley & Sons Ltd and The Association for the Study of Medical Education.

Practice makes imperfect: Working memory training can harm recognition memory performance

DOE Office of Scientific and Technical Information (OSTI.GOV)

Matzen, Laura E.; Trumbo, Michael C.; Haass, Michael J.

There is a great deal of debate concerning the benefits of working memory (WM) training and whether that training can transfer to other tasks. Although a consistent finding is that WM training programs elicit a short-term near-transfer effect (i.e., improvement in WM skills), results are inconsistent when considering persistence of such improvement and far transfer effects. In this study, we compared three groups of participants: a group that received WM training, a group that received training on how to use a mental imagery memory strategy, and a control group that received no training. Although the WM training group improved onmore » the trained task, their posttraining performance on nontrained WM tasks did not differ from that of the other two groups. In addition, although the imagery training group’s performance on a recognition memory task increased after training, the WM training group’s performance on the task decreased after training. Participants’ descriptions of the strategies they used to remember the studied items indicated that WM training may lead people to adopt memory strategies that are less effective for other types of memory tasks. Our results indicate that WM training may have unintended consequences for other types of memory performance.« less

Modeling and Simulation of Turbulent Flows through a Solar Air Heater Having Square-Sectioned Transverse Rib Roughness on the Absorber Plate

PubMed Central

Yadav, Anil Singh; Bhagoria, J. L.

2013-01-01

Solar air heater is a type of heat exchanger which transforms solar radiation into heat energy. The thermal performance of conventional solar air heater has been found to be poor because of the low convective heat transfer coefficient from the absorber plate to the air. Use of artificial roughness on a surface is an effective technique to enhance the rate of heat transfer. A CFD-based investigation of turbulent flow through a solar air heater roughened with square-sectioned transverse rib roughness has been performed. Three different values of rib-pitch (P) and rib-height (e) have been taken such that the relative roughness pitch (P/e = 14.29) remains constant. The relative roughness height, e/D, varies from 0.021 to 0.06, and the Reynolds number, Re, varies from 3800 to 18,000. The results predicted by CFD show that the average heat transfer, average flow friction, and thermohydraulic performance parameter are strongly dependent on the relative roughness height. A maximum value of thermohydraulic performance parameter has been found to be 1.8 for the range of parameters investigated. Comparisons with previously published work have been performed and found to be in excellent agreement. PMID:24222752

Modeling and simulation of turbulent flows through a solar air heater having square-sectioned transverse rib roughness on the absorber plate.

PubMed

Yadav, Anil Singh; Bhagoria, J L

2013-01-01

Solar air heater is a type of heat exchanger which transforms solar radiation into heat energy. The thermal performance of conventional solar air heater has been found to be poor because of the low convective heat transfer coefficient from the absorber plate to the air. Use of artificial roughness on a surface is an effective technique to enhance the rate of heat transfer. A CFD-based investigation of turbulent flow through a solar air heater roughened with square-sectioned transverse rib roughness has been performed. Three different values of rib-pitch (P) and rib-height (e) have been taken such that the relative roughness pitch (P/e = 14.29) remains constant. The relative roughness height, e/D, varies from 0.021 to 0.06, and the Reynolds number, Re, varies from 3800 to 18,000. The results predicted by CFD show that the average heat transfer, average flow friction, and thermohydraulic performance parameter are strongly dependent on the relative roughness height. A maximum value of thermohydraulic performance parameter has been found to be 1.8 for the range of parameters investigated. Comparisons with previously published work have been performed and found to be in excellent agreement.

The Effectiveness of Simulator Motion in the Transfer of Performance on a Tracking Task Is Influenced by Vision and Motion Disturbance Cues.

PubMed

Grundy, John G; Nazar, Stefan; O'Malley, Shannon; Mohrenshildt, Martin V; Shedden, Judith M

2016-06-01

To examine the importance of platform motion to the transfer of performance in motion simulators. The importance of platform motion in simulators for pilot training is strongly debated. We hypothesized that the type of motion (e.g., disturbance) contributes significantly to performance differences. Participants used a joystick to perform a target tracking task in a pod on top of a MOOG Stewart motion platform. Five conditions compared training without motion, with correlated motion, with disturbance motion, with disturbance motion isolated to the visual display, and with both correlated and disturbance motion. The test condition involved the full motion model with both correlated and disturbance motion. We analyzed speed and accuracy across training and test as well as strategic differences in joystick control. Training with disturbance cues produced critical behavioral differences compared to training without disturbance; motion itself was less important. Incorporation of disturbance cues is a potentially important source of variance between studies that do or do not show a benefit of motion platforms in the transfer of performance in simulators. Potential applications of this research include the assessment of the importance of motion platforms in flight simulators, with a focus on the efficacy of incorporating disturbance cues during training. © 2016, Human Factors and Ergonomics Society.

Modifier mass transfer kinetic effect in the performance of solvent gradient simulated moving bed (SG-SMB) process

NASA Astrophysics Data System (ADS)

Câmara, L. D. T.

2015-09-01

The solvent-gradient simulated moving bed process (SG-SMB) is the new tendency in the performance improvement if compared to the traditional isocratic solvent conditions. In such SG-SMB separation process the modulation of the solvent strength leads to significant increase in the purities and productivity followed by reduction in the solvent consumption. A stepwise modelling approach was utilized in the representation of the interconnected chromatographic columns of the system combined with lumped mass transfer models between the solid and liquid phase. The influence of the solvent modifier was considered applying the Abel model which takes into account the effect of modifier volume fraction over the partition coefficient. The modelling and simulations were carried out and compared to the experimental SG-SMB separation of the amino acids phenylalanine and tryptophan. A lumped mass transfer kinetic model was applied for both the modifier (ethanol) as well as the solutes. The simulation results showed that such simple and global mass transfer models are enough to represent all the mass transfer effect between the solid adsorbent and the liquid phase. The separation performance can be improved reducing the interaction or the mass transfer kinetic effect between the solid adsorbent phase and the modifier. The simulations showed great agreement fitting the experimental data of the amino acids concentrations both at the extract as well as at the raffinate.

Fuel-optimal, low-thrust transfers between libration point orbits

NASA Astrophysics Data System (ADS)

Stuart, Jeffrey R.

Mission design requires the efficient management of spacecraft fuel to reduce mission cost, increase payload mass, and extend mission life. High efficiency, low-thrust propulsion devices potentially offer significant propellant reductions. Periodic orbits that exist in a multi-body regime and low-thrust transfers between these orbits can be applied in many potential mission scenarios, including scientific observation and communications missions as well as cargo transport. In light of the recent discovery of water ice in lunar craters, libration point orbits that support human missions within the Earth-Moon region are of particular interest. This investigation considers orbit transfer trajectories generated by a variable specific impulse, low-thrust engine with a primer-vector-based, fuel-optimizing transfer strategy. A multiple shooting procedure with analytical gradients yields rapid solutions and serves as the basis for an investigation into the trade space between flight time and consumption of fuel mass. Path and performance constraints can be included at node points along any thrust arc. Integration of invariant manifolds into the design strategy may also yield improved performance and greater fuel savings. The resultant transfers offer insight into the performance of the variable specific impulse engine and suggest novel implementations of conventional impulsive thrusters. Transfers incorporating invariant manifolds demonstrate the fuel savings and expand the mission design capabilities that are gained by exploiting system symmetry. A number of design applications are generated.

Gaze transfer in remote cooperation: is it always helpful to see what your partner is attending to?

PubMed

Müller, Romy; Helmert, Jens R; Pannasch, Sebastian; Velichkovsky, Boris M

2013-01-01

Establishing common ground in remote cooperation is challenging because nonverbal means of ambiguity resolution are limited. In such settings, information about a partner's gaze can support cooperative performance, but it is not yet clear whether and to what extent the abundance of information reflected in gaze comes at a cost. Specifically, in tasks that mainly rely on spatial referencing, gaze transfer might be distracting and leave the partner uncertain about the meaning of the gaze cursor. To examine this question, we let pairs of participants perform a joint puzzle task. One partner knew the solution and instructed the other partner's actions by (1) gaze, (2) speech, (3) gaze and speech, or (4) mouse and speech. Based on these instructions, the acting partner moved the pieces under conditions of high or low autonomy. Performance was better when using either gaze or mouse transfer compared to speech alone. However, in contrast to the mouse, gaze transfer induced uncertainty, evidenced in delayed responses to the cursor. Also, participants tried to resolve ambiguities by engaging in more verbal effort, formulating more explicit object descriptions and fewer deictic references. Thus, gaze transfer seems to increase uncertainty and ambiguity, thereby complicating grounding in this spatial referencing task. The results highlight the importance of closely examining task characteristics when considering gaze transfer as a means of support.

Training attentional control in older adults.

PubMed

Mackay-Brandt, Anna

2011-07-01

Recent research has demonstrated benefits for older adults from training attentional control using a variable priority strategy, but the construct validity of the training task and the degree to which benefits of training transfer to other contexts are unclear. The goal of this study was to characterize baseline performance on the training task in a sample of 105 healthy older adults and to test for transfer of training in a subset (n = 21). Training gains after 5 days and extent of transfer was compared to another subset (n = 20) that served as a control group. Baseline performance on the training task was characterized by a two-factor model of working memory and processing speed. Processing speed correlated with the training task. Training gains in speed and accuracy were reliable and robust (ps <.001, η(2) = .57 to .90). Transfer to an analogous task was observed (ps <.05, η(2) = .10 to .17). The beneficial effect of training did not translate to improved performance on related measures of processing speed. This study highlights the robust effect of training and transfer to a similar context using a variable priority training task. Although processing speed is an important aspect of the training task, training benefit is either related to an untested aspect of the training task or transfer of training is limited to the training context.

Transfer of learning between unimanual and bimanual rhythmic movement coordination: transfer is a function of the task dynamic.

PubMed

Snapp-Childs, Winona; Wilson, Andrew D; Bingham, Geoffrey P

2015-07-01

Under certain conditions, learning can transfer from a trained task to an untrained version of that same task. However, it is as yet unclear what those certain conditions are or why learning transfers when it does. Coordinated rhythmic movement is a valuable model system for investigating transfer because we have a model of the underlying task dynamic that includes perceptual coupling between the limbs being coordinated. The model predicts that (1) coordinated rhythmic movements, both bimanual and unimanual, are organised with respect to relative motion information for relative phase in the coupling function, (2) unimanual is less stable than bimanual coordination because the coupling is unidirectional rather than bidirectional, and (3) learning a new coordination is primarily about learning to perceive and use the relevant information which, with equal perceptual improvement due to training, yields equal transfer of learning from bimanual to unimanual coordination and vice versa [but, given prediction (2), the resulting performance is also conditioned by the intrinsic stability of each task]. In the present study, two groups were trained to produce 90° either unimanually or bimanually, respectively, and tested in respect to learning (namely improved performance in the trained 90° coordination task and improved visual discrimination of 90°) and transfer of learning (to the other, untrained 90° coordination task). Both groups improved in the task condition in which they were trained and in their ability to visually discriminate 90°, and this learning transferred to the untrained condition. When scaled by the relative intrinsic stability of each task, transfer levels were found to be equal. The results are discussed in the context of the perception-action approach to learning and performance.

12 CFR 1024.21 - Mortgage servicing transfers.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 1024.21 Banks and Banking BUREAU OF CONSUMER FINANCIAL PROTECTION REAL ESTATE SETTLEMENT PROCEDURES ACT... servicer means the owner of the right to perform servicing, which may actually perform the servicing itself... servicer who does not own the right to perform servicing, but who does so on behalf of the master servicer...

12 CFR 1024.21 - Mortgage servicing transfers.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 1024.21 Banks and Banking BUREAU OF CONSUMER FINANCIAL PROTECTION REAL ESTATE SETTLEMENT PROCEDURES ACT... servicer means the owner of the right to perform servicing, which may actually perform the servicing itself... servicer who does not own the right to perform servicing, but who does so on behalf of the master servicer...

Analytical simulation of SPS system performance, volume 3, phase 3

NASA Technical Reports Server (NTRS)

Kantak, A. V.; Lindsey, W. C.

1980-01-01

The simulation model for the Solar Power Satellite spaceantenna and the associated system imperfections are described. Overall power transfer efficiency, the key performance issue, is discussed as a function of the system imperfections. Other system performance measures discussed include average power pattern, mean beam gain reduction, and pointing error.

| NREL

Science.gov Websites

heat transfer, mass transfer, and chemical reaction kinetics in order to analyze the performance and optimize the geometric configuration of a solar receiver used for high-temperature solar-thermal reaction

Numerical investigation on the performance of fin and tube heat exchangers using rectangular vortex generators

NASA Astrophysics Data System (ADS)

Zeeshan, Mohd; Hazarika, Saheera Azmi; Nath, Sujit; Bhanja, Dipankar

2017-07-01

In the present work, a 3-D numerical investigation has been performed to explore the effect of attack angles on the thermal-hydraulic performance of fin and tube heat exchanger (FTHE) using rectangular winglet pairs (RWPs). RWPs are placed adjacent to the tubes and three attack angels are considered for the study i.e. 5°, 15° and 25°. The effect of attack angles are examined on the heat transfer characteristics as well as in pressure drop penalty with airside Reynolds number Rea ranges from 500 to 900. Two performance evaluation criteria namely PEC1 i.e. area goodness factor (j/f) and PEC2 i.e. heat transfer rate per unit fan power consumption (Q/Pf) are considered for the performance evaluation. Furthermore, MOORA method is applied to obtain the performance order of FTHE configurations by taking PEC1 and PEC2 as beneficial attributes and fan power Pf as a non-beneficial attribute, keeping equal importance to each attribute. The results show that 5° attack angle provides the better performance in terms of PEC1 as heat transfer coefficient is increased by 27.70% at Rea=500 and 32.73% at Rea=900 respectively with 13.01% increased pressure drop penalty at Rea=500 and 14.26% at Rea=900 respectively. In terms of PEC2, though the 5° attack angle provides the high values of Q/Pf factor among the 15° and 25° attack angles, but it is found insignificant to replace the baseline configuration i.e. plain fin and tube heat exchanger configuration without vortex generators. Moreover, in MOORA optimization analysis also, it is found that 5° attack angle provides the better thermal-hydraulic performance.

Note: Low-temperature scanning tunneling microscope with detachable scanner and reliable transfer mechanism for tip and sample exchange

NASA Astrophysics Data System (ADS)

Ge, Weifeng; Wang, Jihao; Wang, Junting; Zhang, Jing; Hou, Yubin; Lu, Qingyou

2017-12-01

A homebuilt low-temperature scanning tunneling microscope (STM) featuring a detachable scanner based on a double slider design, along with a reliable transfer mechanism for tip and sample exchange, is present. The coarse motor is decoupled from the scanner, which prevents the motor instabilities including vibrations and drifts from entering the tip-sample loop and thus improves the performance of the STM. In addition, in situ exchange of tips and samples can be implemented easily and reliably using a winch-type transfer mechanism. Atomically resolved images on graphite are demonstrated to show the performance of the proposed STM.

Note: Low-temperature scanning tunneling microscope with detachable scanner and reliable transfer mechanism for tip and sample exchange.

PubMed

Ge, Weifeng; Wang, Jihao; Wang, Junting; Zhang, Jing; Hou, Yubin; Lu, Qingyou

2017-12-01

A homebuilt low-temperature scanning tunneling microscope (STM) featuring a detachable scanner based on a double slider design, along with a reliable transfer mechanism for tip and sample exchange, is present. The coarse motor is decoupled from the scanner, which prevents the motor instabilities including vibrations and drifts from entering the tip-sample loop and thus improves the performance of the STM. In addition, in situ exchange of tips and samples can be implemented easily and reliably using a winch-type transfer mechanism. Atomically resolved images on graphite are demonstrated to show the performance of the proposed STM.

Lunar Surface-to-Surface Power Transfer

NASA Technical Reports Server (NTRS)

Kerslake, Thomas W.

2007-01-01

A human lunar outpost, under NASA study for construction in the 2020's, has potential requirements to transfer electric power up to 50-kW across the lunar surface from 0.1 to 10-km distances. This power would be used to operate surface payloads located remotely from the outpost and/or outpost primary power grid. This paper describes concept designs for state-of-the-art technology power transfer subsystems including AC or DC power via cables, beamed radio frequency power and beamed laser power. Power transfer subsystem mass and performance are calculated and compared for each option. A simplified qualitative assessment of option operations, hazards, costs and technology needs is also described. Based on these concept designs and performance analyses, a DC power cabling subsystem is recommended to minimize subsystem mass and to minimize mission and programmatic costs and risks. Avenues for additional power transfer subsystem studies are recommended.

Prediction of Unshsrouded Rotor Blade Tip Heat Transfer

NASA Technical Reports Server (NTRS)

Ameri, A. A.; Steinthorsson, E.

1994-01-01

The rate of heat transfer on the tip of a turbine rotor blade and on the blade surface in the vicinity of the tip, was successfully predicted. The computations were performed with a multiblock computer code which solves the Reynolds Averaged Navier-Stokes equations using an efficient multigrid method. The case considered for the present calculations was the Space Shuttle Main Engine (SSME) high pressure fuel side turbine. The predictions of the blade tip heat transfer agreed reasonably well with the experimental measurements using the present level of grid refinement. On the tip surface, regions with high rate of heat transfer was found to exist close to the pressure side and suction side edges. Enhancement of the heat transfer was also observed on the blade surface near the tip. Further comparison of the predictions was performed with results obtained from correlations based on fully developed channel flow.

Come to think of it: Contributions of reasoning abilities and training schedule to skill acquisition in a virtual throwing task.

PubMed

Frömer, Romy; Stürmer, Birgit; Sommer, Werner

2016-10-01

According to Schmidt's schema theory skill acquisition is based on schema formation where multiple learning incidents with varying task features are abstracted to a unifying pattern, the schema. Practice can be scheduled block-wise, with low contextual interference (CI) or randomly, with high CI. The greater effort during high CI training usually results in reduced training success but enhanced retention and transfer performance. In contrast to well-established CI effects for simple tasks, findings for complex tasks are heterogeneous, supposedly due to the detrimental accumulation of task demands. We assumed that in complex tasks, cognitive reasoning abilities might impose a limit upon schema formation and hence the effectiveness of CI. In a virtual overarm-throwing experiment participants practiced target positions at center, left, or right and were retested for retention - at the center position - and transfer with a larger target distance. Although there was no main effect of CI on performance, either in training, retention or transfer, under high CI, training performance was better for participants with higher reasoning ability, as measured with the Raven matrices. This advantage persisted across retention and transfer. Under low CI, reasoning was positively related to performance improvement only in the last third of training. We argue, that variability of practice is a necessary prerequisite for beneficial effects of reasoning abilities. Based on previous findings, we discuss feedback evaluation as a possible locus of the relationship between reasoning and performance in motor skill acquisition. Copyright © 2016 Elsevier B.V. All rights reserved.

Achievement of Virtual and Real Objects Using a Short-Term Motor Learning Protocol in People with Duchenne Muscular Dystrophy: A Crossover Randomized Controlled Trial.

PubMed

Massetti, Thais; Fávero, Francis Meire; Menezes, Lilian Del Ciello de; Alvarez, Mayra Priscila Boscolo; Crocetta, Tânia Brusque; Guarnieri, Regiani; Nunes, Fátima L S; Monteiro, Carlos Bandeira de Mello; Silva, Talita Dias da

2018-04-01

To evaluate whether people with Duchenne muscular dystrophy (DMD) practicing a task in a virtual environment could improve performance given a similar task in a real environment, as well as distinguishing whether there is transference between performing the practice in virtual environment and then a real environment and vice versa. Twenty-two people with DMD were evaluated and divided into two groups. The goal was to reach out and touch a red cube. Group A began with the real task and had to touch a real object, and Group B began with the virtual task and had to reach a virtual object using the Kinect system. ANOVA showed that all participants decreased the movement time from the first (M = 973 ms) to the last block of acquisition (M = 783 ms) in both virtual and real tasks and motor learning could be inferred by the short-term retention and transfer task (with increasing distance of the target). However, the evaluation of task performance demonstrated that the virtual task provided an inferior performance when compared to the real task in all phases of the study, and there was no effect for sequence. Both virtual and real tasks promoted improvement of performance in the acquisition phase, short-term retention, and transfer. However, there was no transference of learning between environments. In conclusion, it is recommended that the use of virtual environments for individuals with DMD needs to be considered carefully.

Validation of the VBLaST: A Virtual Peg Transfer Task in Gynecologic Surgeons

PubMed Central

Awtrey, CS; Chellali, A; Schwaitzberg, SD; De, S; Jones, DB; Cao, CGL

2016-01-01

Study Objective To validate the virtual reality VBLaST-PT (the peg transfer task) for concurrent validity based on its ability to differentiate between novice, intermediate and expert groups of gynecologists, and the gynecologists’ subjective preference between the physical FLS system and the virtual reality system. Design Prospective study (Canadian Task Force II-2) Setting Academic medical center. Participants Obstetrics and gynecology residents (n = 18), and attending gynecologists (n = 9) Interventions Twenty-seven subjects were divided into three groups: novices (PGY1-2, n = 9), intermediates (PGY3-4, n = 9), and experts (attendings, n = 9). All subjects performed ten trials of the peg transfer on each simulator. Assessment of laparoscopic performance was based on FLS scoring while a questionnaire was used for subjective evaluation. Measurements and Main Results The results show that the performance scores in the two simulators were nearly identical. Experts performed better than intermediates and novices in both the FLS trainer and the VBLAST© and intermediates performed better than novices in both simulators as well. The results also show a significant learning effect on both trainers for all subgroups however the greatest learning effect was in the novice group for both trainers. Subjectively 74% participants preferred the FLS over the VBLaST© for training laparoscopic surgical skills. Conclusion This study demonstrates that the peg transfer task was reproduced well in the VBLaST in gynecologic surgeons and trainee’s. The VBLaST© has the potential to be a valuable tool in laparoscopic training for gynecologic surgeons. PMID:26216094

Imperfect practice makes perfect: error management training improves transfer of learning.

PubMed

Dyre, Liv; Tabor, Ann; Ringsted, Charlotte; Tolsgaard, Martin G

2017-02-01

Traditionally, trainees are instructed to practise with as few errors as possible during simulation-based training. However, transfer of learning may improve if trainees are encouraged to commit errors. The aim of this study was to assess the effects of error management instructions compared with error avoidance instructions during simulation-based ultrasound training. Medical students (n = 60) with no prior ultrasound experience were randomised to error management training (EMT) (n = 32) or error avoidance training (EAT) (n = 28). The EMT group was instructed to deliberately make errors during training. The EAT group was instructed to follow the simulator instructions and to commit as few errors as possible. Training consisted of 3 hours of simulation-based ultrasound training focusing on fetal weight estimation. Simulation-based tests were administered before and after training. Transfer tests were performed on real patients 7-10 days after the completion of training. Primary outcomes were transfer test performance scores and diagnostic accuracy. Secondary outcomes included performance scores and diagnostic accuracy during the simulation-based pre- and post-tests. A total of 56 participants completed the study. On the transfer test, EMT group participants attained higher performance scores (mean score: 67.7%, 95% confidence interval [CI]: 62.4-72.9%) than EAT group members (mean score: 51.7%, 95% CI: 45.8-57.6%) (p < 0.001; Cohen's d = 1.1, 95% CI: 0.5-1.7). There was a moderate improvement in diagnostic accuracy in the EMT group compared with the EAT group (16.7%, 95% CI: 10.2-23.3% weight deviation versus 26.6%, 95% CI: 16.5-36.7% weight deviation [p = 0.082; Cohen's d = 0.46, 95% CI: -0.06 to 1.0]). No significant interaction effects between group and performance improvements between the pre- and post-tests were found in either performance scores (p = 0.25) or diagnostic accuracy (p = 0.09). The provision of error management instructions during simulation-based training improves the transfer of learning to the clinical setting compared with error avoidance instructions. Rather than teaching to avoid errors, the use of errors for learning should be explored further in medical education theory and practice. © 2016 John Wiley & Sons Ltd and The Association for the Study of Medical Education.

Improving Pediatric Rapid Response Team Performance Through Crew Resource Management Training of Team Leaders.

PubMed

Siems, Ashley; Cartron, Alexander; Watson, Anne; McCarter, Robert; Levin, Amanda

2017-02-01

Rapid response teams (RRTs) improve the detection of and response to deteriorating patients. Professional hierarchies and the multidisciplinary nature of RRTs hinder team performance. This study assessed whether an intervention involving crew resource management training of team leaders could improve team performance. In situ observations of RRT activations were performed pre- and post-training intervention. Team performance and dynamics were measured by observed adherence to an ideal task list and by the Team Emergency Assessment Measure tool, respectively. Multiple quartile (median) and logistic regression models were developed to evaluate change in performance scores or completion of specific tasks. Team leader and team introductions (40% to 90%, P = .004; 7% to 45%, P = .03), floor team presentations in Situation Background Assessment Recommendation format (20% to 65%, P = .01), and confirmation of the plan (7% to 70%, P = .002) improved after training in patients transferred to the ICU (n = 35). The Team Emergency Assessment Measure metric was improved in all 4 categories: leadership (2.5 to 3.5, P < .001), teamwork (2.7 to 3.7, P < .001), task management (2.9 to 3.8, P < .001), and global scores (6.0 to 9.0, P < .001) for teams caring for patients who required transfer to the ICU. Targeted crew resource management training of the team leader resulted in improved team performance and dynamics for patients requiring transfer to the ICU. The intervention demonstrated that training the team leader improved behavior in RRT members who were not trained. Copyright © 2017 by the American Academy of Pediatrics.

The Impact of Resistance Training on Swimming Performance: A Systematic Review.

PubMed

Crowley, Emmet; Harrison, Andrew J; Lyons, Mark

2017-11-01

The majority of propulsive forces in swimming are produced from the upper body, with strong correlations between upper body strength and sprint performance. There are significant gaps in the literature relating to the impact of resistance training on swimming performance, specifically the transfer to swimming performance. The aims of this systematic literature review are to (1) explore the transfer of resistance-training modalities to swimming performance, and (2) examine the effects of resistance training on technical aspects of swimming. Four online databases were searched with the following inclusion criteria: (1) journal articles with outcome measures related to swimming performance, and (2) competitive swimmers participating in a structured resistance-training programme. Exclusion criteria were (1) participants with a mean age <16 years; (2) untrained, novice, masters and paraplegic swimmers; (3) triathletes and waterpolo players; (4) swimmers with injuries or illness; and (5) studies of starts and turns specifically. Data were extracted using the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guidelines, and the Physiotherapy Evidence Database (PEDro) scale was applied. For optimal transfer, specific, low-volume, high-velocity/force resistance-training programmes are optimal. Stroke length is best achieved through resistance training with low repetitions at a high velocity/force. Resisted swims are the most appropriate training modality for improving stroke rate. Future research is needed with respect to the effects of long-term resistance-training interventions on both technical parameters of swimming and overall swimming performance. The results of such work will be highly informative for the scientific community, coaches and athletes.

Scandinavian Working Papers on Bilingualism, 2.

ERIC Educational Resources Information Center

Faerch, Claus; And Others

Five papers on bilingualism are presented. "Giving Transfer a Boost--Describing Transfer Variation in Learners' Interlanguage Performance" by Claus Faerch suggests, outlines, and illustrates a heuristic principle for describing the result of positive transfer from one language to another, based on the assumption that learners maximize…

43 CFR 3216.12 - When does a transferee take responsibility for lease obligations?

Code of Federal Regulations, 2014 CFR

2014-10-01

... not plugged and abandoned at the time of the transfer. ...) GEOTHERMAL RESOURCE LEASING Transfers § 3216.12 When does a transferee take responsibility for lease obligations? After BLM approves your transfer, the transferee is responsible for performing all lease...

43 CFR 3216.12 - When does a transferee take responsibility for lease obligations?

Code of Federal Regulations, 2012 CFR

2012-10-01

... not plugged and abandoned at the time of the transfer. ...) GEOTHERMAL RESOURCE LEASING Transfers § 3216.12 When does a transferee take responsibility for lease obligations? After BLM approves your transfer, the transferee is responsible for performing all lease...

43 CFR 3216.12 - When does a transferee take responsibility for lease obligations?

Code of Federal Regulations, 2011 CFR

2011-10-01

... not plugged and abandoned at the time of the transfer. ...) GEOTHERMAL RESOURCE LEASING Transfers § 3216.12 When does a transferee take responsibility for lease obligations? After BLM approves your transfer, the transferee is responsible for performing all lease...

43 CFR 3216.12 - When does a transferee take responsibility for lease obligations?

Code of Federal Regulations, 2013 CFR

2013-10-01

... not plugged and abandoned at the time of the transfer. ...) GEOTHERMAL RESOURCE LEASING Transfers § 3216.12 When does a transferee take responsibility for lease obligations? After BLM approves your transfer, the transferee is responsible for performing all lease...

The Use of the Self-Standing Turning Transfer Device to Perform Bed-To-Chair Transfers Reduces Physical Stress among Caregivers of Older Patients in a Middle-Income Developing Country.

PubMed

Goh, Choon Hian; Muslimah Y; Ng, Siew-Cheok; Subramanian, Pathmawathi; Tan, Maw Pin

2014-01-01

Manual transfer of elderly patients remains commonplace in many developing countries because the use of lifting equipment, such as hoists, is often considered unaffordable luxuries. The aim of this study was, therefore, to evaluate the usage and potential benefits of a low-cost, mechanical turning transfer device among elderly patients and their caregivers on a geriatric ward in a developing country in South East Asia. Fifty-six inpatients, aged 66-92 years, on a geriatric ward, and their caregivers were recruited. Participants were asked to transfer from bed-to-chair transfer with manual assistance, and the task was repeated using the Self-standing Turning Transfer Device (STurDi). The time taken to perform manual transfers and STurDi-assisted transfers was recorded. Physical strain was assessed using the perceived physical stress-rating tool for caregivers with and without the use of the device. User satisfaction was evaluated using the usefulness, satisfaction, and ease of use questionnaire. There was a significant reduction in transfer-time with manual transfers compared to STurDi-assisted transfers [mean (SD) = 48.39 (13.98) vs. 36.23 (10.96); p ≤ 0.001]. The physical stress rating was significantly lower in STurDi-aided transfers compared to manual transfers, shoulder [median (interquartile range) = 0 (1) vs. 4 (3); p = 0.001], upper back [0 (0) vs. 5 (4); p = 0.001], lower back [0 (1) vs. 5 (3), p = 0.001], whole body [1 (2) vs. 4 (3), p = 0.001], and knee [0 (1) vs. 1 (4), p = 0.001]. In addition, majority of patients and caregivers definitely or strongly agreed that the device was useful, saved time, and was easy to use. We have therefore demonstrated in a setting where manual handling was commonly performed that a low-cost mechanical transfer device reduced caregiver strain and was well received by older patients and caregivers.

The Use of the Self-Standing Turning Transfer Device to Perform Bed-To-Chair Transfers Reduces Physical Stress among Caregivers of Older Patients in a Middle-Income Developing Country

PubMed Central

Goh, Choon Hian; Muslimah Y; Ng, Siew-Cheok; Subramanian, Pathmawathi; Tan, Maw Pin

2014-01-01

Manual transfer of elderly patients remains commonplace in many developing countries because the use of lifting equipment, such as hoists, is often considered unaffordable luxuries. The aim of this study was, therefore, to evaluate the usage and potential benefits of a low-cost, mechanical turning transfer device among elderly patients and their caregivers on a geriatric ward in a developing country in South East Asia. Fifty-six inpatients, aged 66–92 years, on a geriatric ward, and their caregivers were recruited. Participants were asked to transfer from bed-to-chair transfer with manual assistance, and the task was repeated using the Self-standing Turning Transfer Device (STurDi). The time taken to perform manual transfers and STurDi-assisted transfers was recorded. Physical strain was assessed using the perceived physical stress-rating tool for caregivers with and without the use of the device. User satisfaction was evaluated using the usefulness, satisfaction, and ease of use questionnaire. There was a significant reduction in transfer-time with manual transfers compared to STurDi-assisted transfers [mean (SD) = 48.39 (13.98) vs. 36.23 (10.96); p ≤ 0.001]. The physical stress rating was significantly lower in STurDi-aided transfers compared to manual transfers, shoulder [median (interquartile range) = 0 (1) vs. 4 (3); p = 0.001], upper back [0 (0) vs. 5 (4); p = 0.001], lower back [0 (1) vs. 5 (3), p = 0.001], whole body [1 (2) vs. 4 (3), p = 0.001], and knee [0 (1) vs. 1 (4), p = 0.001]. In addition, majority of patients and caregivers definitely or strongly agreed that the device was useful, saved time, and was easy to use. We have therefore demonstrated in a setting where manual handling was commonly performed that a low-cost mechanical transfer device reduced caregiver strain and was well received by older patients and caregivers. PMID:25593906

Experimental estimation of convective heat transfer coefficient from pulsating semi-confined impingement air slot jet by using inverse method

NASA Astrophysics Data System (ADS)

Farahani, Somayeh Davoodabadi; Kowsary, Farshad

2017-09-01

An experimental study on pulsating impingement semi-confined slot jet has been performed. The effect of pulsations frequency was examined for various Reynolds numbers and Nozzle to plate distances. Convective heat transfer coefficient is estimated using the measured temperatures in the target plate and conjugate gradient method with adjoint equation. Heat transfer coefficient in Re < 3000 tended to increase with increasing frequency. The pulsations enhance mixing, which results in an enhancement of mean flow velocity. In case of turbulent jet (Re > 3000), heat transfer coefficient is affected by the pulsation from particular frequency. In this study, the threshold Strouhal number (St) is 0.11. No significant heat transfer enhancement was obtained for St < 0.11. The thermal resistance is smaller each time due to the newly forming thermal boundary layers. Heat transfer coefficient increases due to decrease thermal resistance. This study shows that maximum enhancement in heat transfer due to pulsations occurs in St = 0.169. Results show the configuration geometry has an important effect on the heat transfer performances in pulsed impinging jet. Heat transfer enhancement can be described to reflect flow by the confinement plate.

Experimental investigation of forced convective heat transfer performance in nanofluids of Al2O3/water and CuO/water in a serpentine shaped micro channel heat sink

NASA Astrophysics Data System (ADS)

Sivakumar, A.; Alagumurthi, N.; Senthilvelan, T.

2016-07-01

The microchannels are device used to remove high heat fluxes from smaller area. In this experimental research work the heat transfer performance of nanofluids of Al2O3/water and CuO/water were compared. The important character of such fluids is the enhanced thermal conductivity, in comparison with base fluid without considerable alteration in physical and chemical properties. The effect of forced convective heat transfer coefficient was calculated using serpentine shaped microchannel heat exchanger. Furthermore we calculated the forced convective heat transfer coefficient of the nanofluids using theoretical correlations in order to compare the results with the experimental data. The heat transfer coefficient for different particle concentration and temperature were analysed using forced convection heat transfer using nanofluids. The findings indicate considerable enhancement in convective heat transfer coefficient of the nanofluids as compared to the basefluid. The results also shows that CuO/water nanofluid has increased heat transfer coefficient compared with Al2O3/water and base fluids. Moreover the experimental results indicate there is increased forced convective heat transfer coefficient with the increase in nano particle concentration.

Theory and computation of optimal low- and medium-thrust transfers

NASA Technical Reports Server (NTRS)

Chuang, C.-H.

1994-01-01

This report presents two numerical methods considered for the computation of fuel-optimal, low-thrust orbit transfers in large numbers of burns. The origins of these methods are observations made with the extremal solutions of transfers in small numbers of burns; there seems to exist a trend such that the longer the time allowed to perform an optimal transfer the less fuel that is used. These longer transfers are obviously of interest since they require a motor of low thrust; however, we also find a trend that the longer the time allowed to perform the optimal transfer the more burns are required to satisfy optimality. Unfortunately, this usually increases the difficulty of computation. Both of the methods described use small-numbered burn solutions to determine solutions in large numbers of burns. One method is a homotopy method that corrects for problems that arise when a solution requires a new burn or coast arc for optimality. The other method is to simply patch together long transfers from smaller ones. An orbit correction problem is solved to develop this method. This method may also lead to a good guidance law for transfer orbits with long transfer times.

Cage Change Influences Serum Corticosterone and Anxiety-Like Behaviors in the Mouse

PubMed Central

Rasmussen, Skye; Miller, Melinda M.; Filipski, Sarah B.; Tolwani, Ravi J.

2011-01-01

Environmental variables and husbandry practices can influence physiology and alter behavior in mice. Our study evaluated the effects of cage change on serum corticosterone levels and anxiety-like behaviors in C57BL/6 male mice. We examined the effects of 3 different methods of performing cage transfer and of transferring mice to a clean or a dirty familiar cage microenvironment. The 3 different handling methods were forceps transfer, gentle transfer with gloved hands, and a passive transfer technique that did not involve active handling. Active handling methods and transfer to both clean and dirty cage microenvironments significantly increased serum corticosterone 15 min after cage change; however, at 60 min after cage change, levels were comparable to those of unmanipulated mice. Although the effects were transient, cage change altered anxiety-like behaviors in the open field when behavioral testing was performed on the same day. These results demonstrate that the timing of cage change can influence behavioral results, an effect that is an important consideration for rodent behavioral studies. PMID:21838975

Radiation exposure and performance of multiple burn LEO-GEO orbit transfer trajectories

NASA Technical Reports Server (NTRS)

Gorland, S. H.

1985-01-01

Many potential strategies exist for the transfer of spacecraft from low Earth orbit (LEO) to geosynchronous (GEO) orbit. One strategy has generally been utilized, that being a single impulsive burn at perigee and a GEO insertion burn at apogee. Multiple burn strategies were discussed for orbit transfer vehicles (OTVs) but the transfer times and radiation exposure, particularly for potentially manned missions, were used as arguments against those options. Quantitative results concerning the trip time and radiation encountered by multiple burn orbit transfer missions in order to establish the feasibility of manned missions, the vulnerability of electronics, and the shielding requirements are presented. The performance of these multiple burn missions is quantified in terms of the payload and propellant variances from the minimum energy mission transfer. The missions analyzed varied from one to eight perigee burns and ranged from a high thrust, 1 g acceleration, cryogenic hydrogen-oxygen chemical prpulsion system to a continuous burn, 0.001 g acceleration, hydrogen fueled resistojet propulsion system with a trip time of 60 days.

Fresh embryo transfer versus frozen embryo transfer in in vitro fertilization cycles: a systematic review and meta-analysis.

PubMed

Roque, Matheus; Lattes, Karinna; Serra, Sandra; Solà, Ivan; Geber, Selmo; Carreras, Ramón; Checa, Miguel Angel

2013-01-01

To examine the available evidence to assess if cryopreservation of all embryos and subsequent frozen embryo transfer (FET) results in better outcomes compared with fresh transfer. Systematic review and meta-analysis. Centers for reproductive care. Infertility patient(s). An exhaustive electronic literature search in MEDLINE, EMBASE, and the Cochrane Library was performed through December 2011. We included randomized clinical trials comparing outcomes of IVF cycles between fresh and frozen embryo transfers. The outcomes of interest were ongoing pregnancy rate, clinical pregnancy rate, and miscarriage. We included three trials accounting for 633 cycles in women aged 27-33 years. Data analysis showed that FET resulted in significantly higher ongoing pregnancy rates and clinical pregnancy rates. Our results suggest that there is evidence that IVF outcomes may be improved by performing FET compared with fresh embryo transfer. This could be explained by a better embryo-endometrium synchrony achieved with endometrium preparation cycles. Copyright © 2013 American Society for Reproductive Medicine. Published by Elsevier Inc. All rights reserved.

Polymeric film application for phase change heat transfer

NASA Astrophysics Data System (ADS)

Bart, Hans-Jörg; Dreiser, Christian

2018-06-01

The paper gives a concise review on polymer film heat exchangers (PFHX) with a focus on polyether ether ketone (PEEK) foil as heat transfer element, mechanically supported by a grid structure. In order to promote PFHX applications, heat transfer performance and wetting behavior are studied in detail. Surface modifications to improve wetting are discussed and correlations are presented for critical Reynolds numbers to sustain a stable liquid film. Scaling phenomena related to surface properties and easily adaptable cleaning-in-place (CIP) procedures are further content. The contribution of the foil thickness and material selection on thermal performance is quantified and a correlation for enhanced aqueous film heat transfer for the grid supported PFHX is given. The basic research results and the design criteria enable early stage material selection and conceptual apparatus design.

Nonlinear feedback guidance law for aero-assisted orbit transfer maneuvers

NASA Technical Reports Server (NTRS)

Menon, P. K. A.

1992-01-01

Aero-assisted orbit transfer vehicles have the potential for significantly reducing the fuel requirements in certain classes of orbit transfer operations. Development of a nonlinear feedback guidance law for performing aero-assisted maneuvers that accomplish simultaneous change of all the orbital elements with least vehicle acceleration magnitude is discussed. The analysis is based on a sixth order nonlinear point-mass vehicle model with lift, bank angle, thrust and drag modulation as the control variables. The guidance law uses detailed vehicle aerodynamic and the atmosphere models in the feedback loop. Higher-order gravitational harmonics, planetary atmosphere rotation and ambient winds are included in the formulation. Due to modest computational requirements, the guidance law is implementable on-board an orbit transfer vehicle. The guidance performance is illustrated for three sets of boundary conditions.

Work on a quantum dipole by a single-photon pulse.

PubMed

Valente, D; Brito, F; Ferreira, R; Werlang, T

2018-06-01

Energy transfer from a quantized field to a quantized dipole is investigated. We find that a single photon can transfer energy to a two-level dipole by inducing a dynamic Stark shift, going beyond the well-known absorption and emission processes. A quantum thermodynamical perspective allows us to unravel these two energy transfer mechanisms and to identify the former as a generalized work and the latter as a generalized heat. We show two necessary conditions for the generalized work transfer by a single photon to occur, namely, off-resonance and finite linewidth of the pulse. We also show that the generalized work performed by a single-photon pulse equals the reactive (dispersive) contribution of the work performed by a semiclassical pulse in the low-excitation regime.

Heat Transfer Characteristics of Fan Coil Unit (FCU) Under The Effect of Chilled Water Volume Flowrate

NASA Astrophysics Data System (ADS)

Wijaya Sunu, Putu; Anakottapary, Daud Simon; Mulawarman, A. A. N. B.; Cipta Santosa, I. D. M.; Putu Sastra Negara, I.

2018-01-01

In this paper, the volume flowrate of chilled water in the water chiller simulation apparatus was optimized using experimental studied. The experimental analysis was performed on the fan coil unit (FCU) of the system. The chilled water flows in tube side and the air as a hot fluid flows throughout the tube and fin of FCU. The thermal performance and analysis of the heat transfer is examined using various chilled water flowrate e.g. 11, 12, 13, 14, 15 lpm. The effect of the flowrate to the important parameter such as LMTD temperature, heat absorb used for investigate the heat transfer characteristics. The result showed that the heat transfer characteristics has been increased with the increased of chilled water volume flowrate.

Polymeric film application for phase change heat transfer

NASA Astrophysics Data System (ADS)

Bart, Hans-Jörg; Dreiser, Christian

2018-01-01

The paper gives a concise review on polymer film heat exchangers (PFHX) with a focus on polyether ether ketone (PEEK) foil as heat transfer element, mechanically supported by a grid structure. In order to promote PFHX applications, heat transfer performance and wetting behavior are studied in detail. Surface modifications to improve wetting are discussed and correlations are presented for critical Reynolds numbers to sustain a stable liquid film. Scaling phenomena related to surface properties and easily adaptable cleaning-in-place (CIP) procedures are further content. The contribution of the foil thickness and material selection on thermal performance is quantified and a correlation for enhanced aqueous film heat transfer for the grid supported PFHX is given. The basic research results and the design criteria enable early stage material selection and conceptual apparatus design.

Motor strategies and bilateral transfer in sensorimotor learning of patients with subacute stroke and healthy subjects. A randomized controlled trial.

PubMed

Iosa, M; Morone, G; Ragaglini, M R; Fusco, A; Paolucci, S

2013-06-01

Bilateral transfer, i.e. the capacity to transfer from one to the other hand a learned motor skill, may help the recovery of upper limb functions after stroke. To investigate the motor strategies at the basis of sensorimotor learning involved in bilateral transfer. Randomized controlled trial. Neurorehabilitation Hospital. Eighty right-handed participants (65 ± 13 years old): 40 patients with subacute stroke, 40 control healthy subjects. Subjects performed the 9 hole-peg-test twice in an order defined by random allocation: first with low and then with high skilled hand (LS-HS) or the reverse (HS-LS). Time spent to complete the test and filling sequence were recorded, together with maximum pinch force (assessed using a dynamometer), upper limb functioning (Motricity Index), spasticity (modified Ashworth Scale), limb dominance (Edinburgh Handeness Inventory). As expected, in patients, the performance was found related to the residual pinch force (P<0.001), upper limb motricity (P=0.006) and side of hemiparesis (P=0.016). The performances of all subjects improved more in HS-LS than in LS-HS subgroups (P=0.043). The strategy adopted in the first trial influenced the velocity in the second one (P=0.030). Bilateral transfer was observed from high to low skilled hand. Learning was not due to a mere sequence repetition, but on a strategy chosen on the basis of the previous performance. The affected hand of patients with subacute stroke may benefit from sensorimotor learning occurred with the un-affected hand.

The Effect of Conceptual and Contextual Familiarity on Transfer Performance

ERIC Educational Resources Information Center

Kulasegaram, Kulamakan; Min, Cynthia; Ames, Kimberly; Howey, Elizabeth; Neville, Alan; Norman, Geoffrey

2012-01-01

Applying a previously learned concept to a novel problem is an important but difficult process called transfer. It is suggested that a commonsense analogy aids in transfer by linking novel concepts to familiar ones. How the context of practice affects transfer when learning using analogies is still unclear. This study investigated the effect of a…

Performance characteristics of a thermal energy storage module - A transient PCM/forced convection conjugate analysis

NASA Technical Reports Server (NTRS)

Cao, Y.; Faghri, A.

1991-01-01

The performance of a thermal energy storage module is simulated numerically. The change of phase of the phase-change material (PCM) and the transient forced convective heat transfer for the transfer fluid with low Prandtl numbers are solved simultaneously as a conjugate problem. A parametric study and a system optimization are conducted. The numerical results show that module geometry is crucial to the design of a space-based thermal energy storage system.

Development of Hardware-in-the-Loop Simulation Based on Gazebo and Pixhawk for Unmanned Aerial Vehicles

NASA Astrophysics Data System (ADS)

Nguyen, Khoa Dang; Ha, Cheolkeun

2018-04-01

Hardware-in-the-loop simulation (HILS) is well known as an effective approach in the design of unmanned aerial vehicles (UAV) systems, enabling engineers to test the control algorithm on a hardware board with a UAV model on the software. Performance of HILS is determined by performances of the control algorithm, the developed model, and the signal transfer between the hardware and software. The result of HILS is degraded if any signal could not be transferred to the correct destination. Therefore, this paper aims to develop a middleware software to secure communications in HILS system for testing the operation of a quad-rotor UAV. In our HILS, the Gazebo software is used to generate a nonlinear six-degrees-of-freedom (6DOF) model, sensor model, and 3D visualization for the quad-rotor UAV. Meanwhile, the flight control algorithm is designed and implemented on the Pixhawk hardware. New middleware software, referred to as the control application software (CAS), is proposed to ensure the connection and data transfer between Gazebo and Pixhawk using the multithread structure in Qt Creator. The CAS provides a graphical user interface (GUI), allowing the user to monitor the status of packet transfer, and perform the flight control commands and the real-time tuning parameters for the quad-rotor UAV. Numerical implementations have been performed to prove the effectiveness of the middleware software CAS suggested in this paper.

LADS: Optimizing Data Transfers using Layout-Aware Data Scheduling

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kim, Youngjae; Atchley, Scott; Vallee, Geoffroy R

While future terabit networks hold the promise of signifi- cantly improving big-data motion among geographically distributed data centers, significant challenges must be overcome even on today s 100 gigabit networks to real- ize end-to-end performance. Multiple bottlenecks exist along the end-to-end path from source to sink. Data stor- age infrastructure at both the source and sink and its in- terplay with the wide-area network are increasingly the bottleneck to achieving high performance. In this paper, we identify the issues that lead to congestion on the path of an end-to-end data transfer in the terabit network en- vironment, and we presentmore » a new bulk data movement framework called LADS for terabit networks. LADS ex- ploits the underlying storage layout at each endpoint to maximize throughput without negatively impacting the performance of shared storage resources for other users. LADS also uses the Common Communication Interface (CCI) in lieu of the sockets interface to use zero-copy, OS-bypass hardware when available. It can further im- prove data transfer performance under congestion on the end systems using buffering at the source using flash storage. With our evaluations, we show that LADS can avoid congested storage elements within the shared stor- age resource, improving I/O bandwidth, and data transfer rates across the high speed networks.« less

Effect of using ethanol and methanol on thermal performance of a closed loop pulsating heat pipe (CLPHP) with different filling ratios

NASA Astrophysics Data System (ADS)

Rahman, Md. Lutfor; Salsabil, Zaimaa; Yasmin, Nusrat; Nourin, Farah Nazifa; Ali, Mohammad

2016-07-01

This paper presents an experimental study of a closed loop Pulsating Heat Pipe (CLPHP) as the demand of smaller and effective heat transfer devices is increasing day by day. PHP is a two phase heat transfer device suited for heat transfer applications, especially suited for handling moderate to high heat fluxes in different applications. A copper made Pulsating Heat Pipe (PHP) of 250 mm length is used in this experimental work with 2 mm ID and 3 mm OD, closed end-to-end in 8 looped, evacuated and then partially filled with working fluids. The evaporation section is 50 mm, adiabatic section is 120 mm and condensation section is 80 mm. The performance characterization is done for two working fluids at Vertical (0°) orientations. The working fluids are Methanol and Ethanol and the filling ratios are 40%, 50%, 60% & 70% based on total volume, respectively. The results show that the influence of various parameters, the heat input flux, and different filling ratios on a heat transfer performance of CLPHP. Methanol shows better performance as working fluid in PHP than ethanol at present orientation for a wide range of heat inputs and can be used at high heat input conditions. Ethanol is better choice to be used in low heat input conditions.

Metal-electrode-free Window-like Organic Solar Cells with p-Doped Carbon Nanotube Thin-film Electrodes.

PubMed

Jeon, Il; Delacou, Clement; Kaskela, Antti; Kauppinen, Esko I; Maruyama, Shigeo; Matsuo, Yutaka

2016-08-16

Organic solar cells are flexible and inexpensive, and expected to have a wide range of applications. Many transparent organic solar cells have been reported and their success hinges on full transparency and high power conversion efficiency. Recently, carbon nanotubes and graphene, which meet these criteria, have been used in transparent conductive electrodes. However, their use in top electrodes has been limited by mechanical difficulties in fabrication and doping. Here, expensive metal top electrodes were replaced with high-performance, easy-to-transfer, aerosol-synthesized carbon nanotubes to produce transparent organic solar cells. The carbon nanotubes were p-doped by two new methods: HNO3 doping via 'sandwich transfer', and MoOx thermal doping via 'bridge transfer'. Although both of the doping methods improved the performance of the carbon nanotubes and the photovoltaic performance of devices, sandwich transfer, which gave a 4.1% power conversion efficiency, was slightly more effective than bridge transfer, which produced a power conversion efficiency of 3.4%. Applying a thinner carbon nanotube film with 90% transparency decreased the efficiency to 3.7%, which was still high. Overall, the transparent solar cells had an efficiency of around 50% that of non-transparent metal-based solar cells (7.8%).

An Interactive Decision Support System for Technology Transfer Pertaining to Organization and Management

DTIC Science & Technology

1980-07-01

and concludes that task is a vital ingredient in assessing overall organizational climate. He identifies satisfaction , tension performance and...Generation Performances and Perceived Satisfaction Levels...", Proceedings of the American Institute of Decision Sciences , 1978, pp. 171-173. Jackson...to Organization and Management Technical S. PERFORMING ORG. REPORT NUMBER 7. AUTHORS 8. CONTRACT OR GRANT NUMBERfsj Ronald J. Roland 9. PERFORMING

Do the skills acquired by novice surgeons using anatomic dry models transfer effectively to the task of diagnostic knee arthroscopy performed on cadaveric specimens?

PubMed

Butler, Aaron; Olson, Tyson; Koehler, Ryan; Nicandri, Gregg

2013-02-06

The use of surgical simulation in orthopaedic education is increasing; however, its ideal place within the training curriculum remains unknown. The purpose of this study was to determine the effectiveness of training novice surgeons on an anatomic dry model of the knee prior to training them to perform diagnostic arthroscopy on cadaveric specimens. Fourteen medical students were randomly assigned to two groups. The experimental group was trained to perform diagnostic arthroscopy of the knee on anatomic dry models prior to training on cadaveric specimens. The control group was trained only on cadaveric specimens. Proficiency was assessed with use of a modified version of a previously validated objective assessment of arthroscopic skill, the Basic Arthroscopic Knee Skill Scoring System (BAKSSS). The mean number of trials required to attain minimal proficiency when performing diagnostic knee arthroscopy was compared between the groups. The cumulative transfer effectiveness ratio (CTER) was calculated to measure the transfer of skills acquired by the experimental group. The mean number of trials to demonstrate minimum proficiency was significantly lower in the experimental group (2.57) than in the control group (4.57) (p < 0.01). The mean time to demonstrate proficiency was also significantly less in the experimental group (37.51 minutes) than in the control group (60.48 minutes) (p < 0.01). The CTER of dry-model training for the task of performing diagnostic knee arthroscopy on cadaveric specimens was 0.2. Previous training utilizing an anatomic dry knee model resulted in improved proficiency for novice surgeons learning to perform diagnostic knee arthroscopy on cadaveric specimens. A CTER of 0.2 suggests that dry models can serve as a useful adjunct to cadaveric training for diagnostic knee arthroscopy but cannot entirely replace it within the orthopaedic curriculum. Further work is necessary to determine the optimal amount of training on anatomic dry models that will maximize transfer effectiveness and to determine how well skills obtained in the simulated environment transfer to the operating room.

Characterizing the Learning Curve of the VBLaST-PT© (Virtual Basic Laparoscopic Skill Trainer)

PubMed Central

Zhang, Likun; Sankaranarayanan, Ganesh; Arikatla, Venkata Sreekanth; Ahn, Woojin; Grosdemouge, Cristol; Rideout, Jesse M.; Epstein, Scott K.; De, Suvranu; Schwaitzberg, Steven D.; Jones, Daniel B.; Cao, Caroline G.L.

2013-01-01

Background and study aim Mastering laparoscopic surgical skills requires considerable time and effort. The Virtual Basic Laparoscopic Skill Trainer (VBLaST-PT©) is being developed as a computerized version of the peg transfer task of the Fundamentals of Laparoscopic Surgery (FLS) system using virtual reality technology. We assessed the learning curve of trainees on the VBLaST-PT© using the cumulative summation (CUSUM) method and compared them with those on the FLS to establish convergent validity for the VBLaST-PT©. Methods Eighteen medical students from were assigned randomly to one of three groups: control, VBLaST-training and FLS-training. The VBLaST and the FLS groups performed a total of 150 trials of the peg-transfer task over a three week period, five days a week. Their CUSUM scores were computed based on pre-defined performance criteria (junior, intermediate and senior levels). Results Of the six subjects in the VBLaST-training group, five achieved at least the “junior” level, three achieved the “intermediate” level and one achieved the “senior” level of performance criterion by the end of the 150 trials. In comparison, for the FLS group, three students achieved the “senior” criterion and all six students achieved the “intermediate” and “junior” criteria by the 150th trials. Both the VBLaST-PT© and the FLS systems showed significant skill improvement and retention, albeit with system specificity as measured by transfer of learning in the retention test: The VBLaST-trained group performed better on the VBLaST-PT© than on FLS (p=0.003), while the FLS-trained group performed better on the FLS than on VBLaST-PT© (p=0.002). Conclusion We characterized the learning curve for a virtual peg transfer task on the VBLaST-PT© and compared it with the FLS using CUSUM analysis. Subjects in both training groups showed significant improvement in skill performance, but the transfer of training between systems was not significant. PMID:23572217

Increases in lower-body strength transfer positively to sprint performance: a systematic review with meta-analysis.

PubMed

Seitz, Laurent B; Reyes, Alvaro; Tran, Tai T; Saez de Villarreal, Eduardo; Haff, G Gregory

2014-12-01

Although lower-body strength is correlated with sprint performance, whether increases in lower-body strength transfer positively to sprint performance remain unclear. This meta-analysis determined whether increases in lower-body strength (measured with the free-weight back squat exercise) transfer positively to sprint performance, and identified the effects of various subject characteristics and resistance-training variables on the magnitude of sprint improvement. A computerized search was conducted in ADONIS, ERIC, SPORTDiscus, EBSCOhost, Google Scholar, MEDLINE and PubMed databases, and references of original studies and reviews were searched for further relevant studies. The analysis comprised 510 subjects and 85 effect sizes (ESs), nested with 26 experimental and 11 control groups and 15 studies. There is a transfer between increases in lower-body strength and sprint performance as indicated by a very large significant correlation (r = -0.77; p = 0.0001) between squat strength ES and sprint ES. Additionally, the magnitude of sprint improvement is affected by the level of practice (p = 0.03) and body mass (r = 0.35; p = 0.011) of the subject, the frequency of resistance-training sessions per week (r = 0.50; p = 0.001) and the rest interval between sets of resistance-training exercises (r = -0.47; p ≤ 0.001). Conversely, the magnitude of sprint improvement is not affected by the athlete's age (p = 0.86) and height (p = 0.08), the resistance-training methods used through the training intervention, (p = 0.06), average load intensity [% of 1 repetition maximum (RM)] used during the resistance-training sessions (p = 0.34), training program duration (p = 0.16), number of exercises per session (p = 0.16), number of sets per exercise (p = 0.06) and number of repetitions per set (p = 0.48). Increases in lower-body strength transfer positively to sprint performance. The magnitude of sprint improvement is affected by numerous subject characteristics and resistance-training variables, but the large difference in number of ESs available should be taken into consideration. Overall, the reported improvement in sprint performance (sprint ES = -0.87, mean sprint improvement = 3.11 %) resulting from resistance training is of practical relevance for coaches and athletes in sport activities requiring high levels of speed.

Fundamental performance differences between CMOS and CCD imagers: part III

NASA Astrophysics Data System (ADS)

Janesick, James; Pinter, Jeff; Potter, Robert; Elliott, Tom; Andrews, James; Tower, John; Cheng, John; Bishop, Jeanne

2009-08-01

This paper is a status report on recent scientific CMOS imager developments since when previous publications were written. Focus today is being given on CMOS design and process optimization because fundamental problems affecting performance are now reasonably well understood. Topics found in this paper include discussions on a low cost custom scientific CMOS fabrication approach, substrate bias for deep depletion imagers, near IR and x-ray point-spread performance, custom fabricated high resisitivity epitaxial and SOI silicon wafers for backside illuminated imagers, buried channel MOSFETs for ultra low noise performance, 1 e- charge transfer imagers, high speed transfer pixels, RTS/ flicker noise versus MOSFET geometry, pixel offset and gain non uniformity measurements, high S/N dCDS/aCDS signal processors, pixel thermal dark current sources, radiation damage topics, CCDs fabricated in CMOS and future large CMOS imagers planned at Sarnoff.

Benefits of high aerodynamic efficiency to orbital transfer vehicles

NASA Technical Reports Server (NTRS)

Andrews, D. G.; Norris, R. B.; Paris, S. W.

1984-01-01

The benefits and costs of high aerodynamic efficiency on aeroassisted orbital transfer vehicles (AOTV) are analyzed. Results show that a high lift to drag (L/D) AOTV can achieve significant velocity savings relative to low L/D aerobraked OTV's when traveling round trip between low Earth orbits (LEO) and alternate orbits as high as geosynchronous Earth orbit (GEO). Trajectory analysis is used to show the impact of thermal protection system technology and the importance of lift loading coefficient on vehicle performance. The possible improvements in AOTV subsystem technologies are assessed and their impact on vehicle inert weight and performance noted. Finally, the performance of high L/D AOTV concepts is compared with the performances of low L/D aeroassisted and all propulsive OTV concepts to assess the benefits of aerodynamic efficiency on this class of vehicle.

An Investigation of Unified Memory Access Performance in CUDA

PubMed Central

Landaverde, Raphael; Zhang, Tiansheng; Coskun, Ayse K.; Herbordt, Martin

2015-01-01

Managing memory between the CPU and GPU is a major challenge in GPU computing. A programming model, Unified Memory Access (UMA), has been recently introduced by Nvidia to simplify the complexities of memory management while claiming good overall performance. In this paper, we investigate this programming model and evaluate its performance and programming model simplifications based on our experimental results. We find that beyond on-demand data transfers to the CPU, the GPU is also able to request subsets of data it requires on demand. This feature allows UMA to outperform full data transfer methods for certain parallel applications and small data sizes. We also find, however, that for the majority of applications and memory access patterns, the performance overheads associated with UMA are significant, while the simplifications to the programming model restrict flexibility for adding future optimizations. PMID:26594668

Feedback Specificity, Information Processing, and Transfer of Training

ERIC Educational Resources Information Center

Goodman, Jodi S.; Wood, Robert E.; Chen, Zheng

2011-01-01

This study examines the effects of feedback specificity on transfer of training and the mechanisms through which feedback can enhance or inhibit transfer. We used concurrent verbal protocol methodology to elicit and operationalize the explicit information processing activities used by 48 trainees performing the Furniture Factory computer…

Bakersfield College Transfer Study Data.

ERIC Educational Resources Information Center

Scott, David C.

Data provided by the University of California (UC) and California State University and Colleges (CSUC) were analyzed to identify enrollment trends and assess academic performance among transfer students from Bakersfield College. Study findings included the following: (1) first-time transfers from Bakersfield College to CSUC decreased from 391 in…

Embracing Errors in Simulation-Based Training: The Effect of Error Training on Retention and Transfer of Central Venous Catheter Skills.

PubMed

Gardner, Aimee K; Abdelfattah, Kareem; Wiersch, John; Ahmed, Rami A; Willis, Ross E

2015-01-01

Error management training is an approach that encourages exposure to errors during initial skill acquisition so that learners can be equipped with important error identification, management, and metacognitive skills. The purpose of this study was to determine how an error-focused training program affected performance, retention, and transfer of central venous catheter (CVC) placement skills when compared with traditional training methodologies. Surgical interns (N = 30) participated in a 1-hour session featuring an instructional video and practice performing internal jugular (IJ) and subclavian (SC) CVC placement with guided instruction. All interns underwent baseline knowledge and skill assessment for IJ and SC (pretest) CVC placement; watched a "correct-only" (CO) or "correct + error" (CE) instructional video; practiced for 30 minutes; and were posttested on knowledge and IJ and SC CVC placement. Skill retention and transfer (femoral CVC placement) were assessed 30 days later. All skills tests (pretest, posttest, and transfer) were videorecorded and deidentified for evaluation by a single blinded instructor using a validated 17-item checklist. Both the groups exhibited significant improvements (p < 0.001) in knowledge and skills after the 1-hour training program, but the increase of items achieved on the performance checklist did not differ between conditions (CO: IJ Δ = 35%, SC Δ = 29%; CE: IJ Δ = 36%, subclavian Δ = 33%). However, 1 month later, the CO group exhibited significant declines in skill retention on IJ CVC placement (from 68% at posttraining to 44% at day 30; p < 0.05) and SC CVC placement (from 63% at posttraining to 49% at day 30; p < 0.05), whereas the CE group did not have significant decreases in performance. The CE group performed significantly better on femoral CVC placement (i.e., transfer task; 62% vs 38%; p < 0.01) and on 2 of the 3 complication scenarios (p < 0.05) when compared with the CO group. These data indicate that incorporating error-based activities and discussions into training programs can be beneficial for skill retention and transfer. Copyright © 2015 Association of Program Directors in Surgery. Published by Elsevier Inc. All rights reserved.

Cryogenic On-Orbit Liquid Depot Storage, Acquisition, and Transfer Satellite (COLD-SAT)

NASA Technical Reports Server (NTRS)

Schuster, John R.; Russ, Edwin J.; Wachter, Joseph P.

1990-01-01

The Cryogenic On-Orbit Liquid Depot Storage, Acquisition, and Transfer Satellite (COLD-SAT) will perform subcritical liquid hydrogen handling experiments under low gravity conditions to provide engineering data for future space transportation missions. Comprising the four Class 1 enabling experiments are tank press control, tank chilldown, tank no-vent fill, and liquid acquisition device fill/refill. The nine Class 2 enhancing experiments are tanker thermal performance, pressurization, low-gravity setting and outflow, liquid acquisition device performance, transfer line chilldown, outflow subcooling, low-gravity vented fill, fluid dumping, and advanced instrumentation. Consisting of an experiment module mated to a spacecraft bus, COLD-SAT will be placed in an initial 1300 km circular orbit by an Atlas commercial launch vehicle, and will perform experiments in a semi-autonomous mode for a period of up to six months. The three-axis controlled spacecraft bus provides electric power, control and data management, communications, and attitude control along with propulsive acceleration levels ranging from 10(exp -6) to 10(exp -4) g. It is desired to understand the effects that low acceleration levels might have on the heat and mass transfer processes involved in some of the experiments. The experiment module contains the three liquid hydrogen tanks, valves, pressurization and pumping equipment, and instrumentation. Within the highly insulated tanks are specialized fluid management equipment that might be used in future space transportation systems. At launch all the liquid hydrogen for the experiments is contained in the largest tank, which has helium-purged insulation to prevent cryo-pumping of air on the launch pad. The tank is loaded by the hydrogen tanking system used for the Centaur upper stage of the Atlas. After reaching orbit the two smaller tanks become receivers for fluid transfers, and when tanked, become the vessels for performing many of the experiments.

Is there inter-procedural transfer of skills in intraocular surgery? A randomized controlled trial.

PubMed

Thomsen, Ann Sofia Skou; Kiilgaard, Jens Folke; la Cour, Morten; Brydges, Ryan; Konge, Lars

2017-12-01

To investigate how experience in simulated cataract surgery impacts and transfers to the learning curves for novices in vitreoretinal surgery. Twelve ophthalmology residents without previous experience in intraocular surgery were randomized to (1) intensive training in cataract surgery on a virtual-reality simulator until passing a test with predefined validity evidence (cataract trainees) or to (2) no cataract surgery training (novices). Possible skill transfer was assessed using a test consisting of all 11 vitreoretinal modules on the EyeSi virtual-reality simulator. All participants repeated the test of vitreoretinal surgical skills until their performance curve plateaued. Three experienced vitreoretinal surgeons also performed the test to establish validity evidence. Analysis with independent samples t-tests was performed. The vitreoretinal test on the EyeSi simulator demonstrated evidence of validity, given statistically significant differences in mean test scores for the first repetition; experienced surgeons scored higher than novices (p = 0.023) and cataract trainees (p = 0.003). Internal consistency for the 11 modules of the test was acceptable (Cronbach's α = 0.73). Our findings did not indicate a transfer effect with no significant differences found between cataract trainees and novices in their starting scores (mean ± SD 381 ± 129 points versus 455 ± 82 points, p = 0.262), time to reach maximum performance level (10.7 ± 3.0 hr versus 8.7 ± 2.8 hr, p = 0.265), or maximum scores (785 ± 162 points versus 805 ± 73 points, p = 0.791). Pretraining in cataract surgery did not demonstrate any measurable effect on vitreoretinal procedural performance. The results of this study indicate that we should not anticipate extensive transfer of surgical skills when planning training programmes in intraocular surgery. © 2017 Acta Ophthalmologica Scandinavica Foundation. Published by John Wiley & Sons Ltd.

Neural correlates of training and transfer effects in working memory in older adults.

PubMed

Heinzel, Stephan; Lorenz, Robert C; Pelz, Patricia; Heinz, Andreas; Walter, Henrik; Kathmann, Norbert; Rapp, Michael A; Stelzel, Christine

2016-07-01

As indicated by previous research, aging is associated with a decline in working memory (WM) functioning, related to alterations in fronto-parietal neural activations. At the same time, previous studies showed that WM training in older adults may improve the performance in the trained task (training effect), and more importantly, also in untrained WM tasks (transfer effects). However, neural correlates of these transfer effects that would improve understanding of its underlying mechanisms, have not been shown in older participants as yet. In this study, we investigated blood-oxygen-level-dependent (BOLD) signal changes during n-back performance and an untrained delayed recognition (Sternberg) task following 12sessions (45min each) of adaptive n-back training in older adults. The Sternberg task used in this study allowed to test for neural training effects independent of specific task affordances of the trained task and to separate maintenance from updating processes. Thirty-two healthy older participants (60-75years) were assigned either to an n-back training or a no-contact control group. Before (t1) and after (t2) training/waiting period, both the n-back task and the Sternberg task were conducted while BOLD signal was measured using functional Magnetic Resonance Imaging (fMRI) in all participants. In addition, neuropsychological tests were performed outside the scanner. WM performance improved with training and behavioral transfer to tests measuring executive functions, processing speed, and fluid intelligence was found. In the training group, BOLD signal in the right lateral middle frontal gyrus/caudal superior frontal sulcus (Brodmann area, BA 6/8) decreased in both the trained n-back and the updating condition of the untrained Sternberg task at t2, compared to the control group. fMRI findings indicate a training-related increase in processing efficiency of WM networks, potentially related to the process of WM updating. Performance gains in untrained tasks suggest that transfer to other cognitive tasks remains possible in aging. Copyright © 2016 Elsevier Inc. All rights reserved.

Face and Construct Validation of a Virtual Peg Transfer Simulator

PubMed Central

Arikatla, Venkata S; Sankaranarayanan, Ganesh; Ahn, Woojin; Chellali, Amine; De, Suvranu; Caroline, GL; Hwabejire, John; DeMoya, Marc; Schwaitzberg, Steven; Jones, Daniel B.

2013-01-01

Background The Fundamentals of Laparascopic Surgery (FLS) trainer box is now established as a standard for evaluating minimally invasive surgical skills. A particularly simple task in this trainer box is the peg transfer task which is aimed at testing the surgeon’s bimanual dexterity, hand-eye coordination, speed and precision. The Virtual Basic Laparoscopic Skill Trainer (VBLaST©) is a virtual version of the FLS tasks which allows automatic scoring and real time, subjective quantification of performance without the need of a human proctor. In this paper we report validation studies of the VBLaST© peg transfer (VBLaST-PT©) simulator. Methods Thirty-five subjects with medical background were divided into two groups: experts (PGY 4-5, fellows and practicing surgeons) and novices (PGY 1-3). The subjects were asked to perform the peg transfer task on both the FLS trainer box and the VBLaST-PT© simulator and their performance was evaluated based on established metrics of error and time. A new length of trajectory (LOT) metric has also been introduced for offline analysis. A questionnaire was used to rate the realism of the virtual system on a 5-point Likert scale. Results Preliminary face validation of the VBLaST-PT© with 34 subjects rated on a 5-point Likert scale questionnaire revealed high scores for all aspects of simulation, with 3.53 being the lowest mean score across all questions. A two-tailed Mann-Whitney performed on the total scores showed significant (p=0.001) difference between the groups. A similar test performed on the task time (p=0.002) and the length of trajectory (p=0.004) separately showed statistically significant differences between the experts and novice groups (p<0.05). The experts appear to be traversing shorter overall trajectories in less time than the novices. Conclusion VBLaST-PT© showed both face and construct validity and has promise as a substitute for the FLS to training peg transfer skills. PMID:23263645

Age-Related Differences in Transfer Costs: Evidence From Go/Nogo Tasks

PubMed Central

Vallesi, Antonino; Hasher, Lynn; Stuss, Donald T.

2012-01-01

To assess whether age-related differences in suppressing nontarget material impact subsequent performance, the authors initially asked younger and older adults to perform a go/nogo task with colored letters used as conflicting go/nogo stimuli and 2 colored numbers as low-conflict nogo stimuli. Next, participants performed another go/nogo task. A previous number was reused as a nogo stimulus and the other as a go stimulus, with new numbers serving as a baseline. In a 1st block of trials, younger adults showed slower responses to previous nogo/now-go numbers than to new go numbers, an effect not shown by older adults. Alternative accounts of these differential transfer costs are discussed. PMID:20718536

Ground temperature measurement by PRT-5 for maps experiment

NASA Technical Reports Server (NTRS)

Gupta, S. K.; Tiwari, S. N.

1978-01-01

A simple algorithm and computer program were developed for determining the actual surface temperature from the effective brightness temperature as measured remotely by a radiation thermometer called PRT-5. This procedure allows the computation of atmospheric correction to the effective brightness temperature without performing detailed radiative transfer calculations. Model radiative transfer calculations were performed to compute atmospheric corrections for several values of the surface and atmospheric parameters individually and in combination. Polynomial regressions were performed between the magnitudes or deviations of these parameters and the corresponding computed corrections to establish simple analytical relations between them. Analytical relations were also developed to represent combined correction for simultaneous variation of parameters in terms of their individual corrections.

Mobile Multicast in Hierarchical Proxy Mobile IPV6

NASA Astrophysics Data System (ADS)

Hafizah Mohd Aman, Azana; Hashim, Aisha Hassan A.; Mustafa, Amin; Abdullah, Khaizuran

2013-12-01

Mobile Internet Protocol Version 6 (MIPv6) environments have been developing very rapidly. Many challenges arise with the fast progress of MIPv6 technologies and its environment. Therefore the importance of improving the existing architecture and operations increases. One of the many challenges which need to be addressed is the need for performance improvement to support mobile multicast. Numerous approaches have been proposed to improve mobile multicast performance. This includes Context Transfer Protocol (CXTP), Hierarchical Mobile IPv6 (HMIPv6), Fast Mobile IPv6 (FMIPv6) and Proxy Mobile IPv6 (PMIPv6). This document describes multicast context transfer in hierarchical proxy mobile IPv6 (H-PMIPv6) to provide better multicasting performance in PMIPv6 domain.

Trends in Performance-Based Funding. Data Points: Volume 5, Issue 19

ERIC Educational Resources Information Center

American Association of Community Colleges, 2017

2017-01-01

States' use of postsecondary performance-based funding is intended to encourage colleges to improve student outcomes. The model relies on indicators such as course completion, time to degree, transfer rates, number of credentials awarded and the number of low-income and minority graduates served. Currently, 21 states use performance-based funding…

Influence of blade leading edge geometry and upstream blowing on the heat/mass transfer in a turbine cascade

NASA Astrophysics Data System (ADS)

Papa, Marco

The effect of secondary flows on mass transfer from a simulated gas turbine blade and hubwall is investigated. Measurements performed using naphthalene sublimation provide non-dimensional mass transfer coefficients, in the form of Sherwood numbers, that can be converted to heat transfer coefficients through the use of an analogy. Tests are conducted in a linear cascade composed of five blades having the profile of a first stage rotor blade of a high-pressure turbine aircraft engine. Detailed mass transfer maps on the airfoil and endwall surfaces allow the identification of significant flow features that are in good agreement with existing secondary flow models. These results are well-suited for validation of numerical codes, as they are obtained with an accurate technique that does not suffer from conduction or radiation errors and allows the imposition of precise boundary conditions. The performance of a RANS (Reynolds Averaged Navier-Stokes) numerical code that simulates the flow and heat/mass transfer in the cascade using the SST (Shear Stress Transport) k-o model is evaluated through a comparison with the experimental results. Tests performed with a modified blade leading edge show that the introduction of a fillet at the junction with the endwall reduces the effects of the horseshoe vortex in the first part of the passage, while no measurable changes in mass transfer are observed further downstream. Air injected through a slot located upstream of the cascade simulates the engine wheelspace coolant injection between the stator and the rotor. Local mass transfer data obtained injecting naphthalene-free and naphthalene-saturated air are reduced to derive maps of cooling effectiveness on the blade and endwall. Oil dot tests show the surface flow on the endwall. The surface downstream of the gap is coplanar to the upstream surface in the baseline configuration and is shifted to form a forward and backward facing step to investigate the effects of component misalignments. Sufficiently high injection rates alter the structure of the secondary flows and significantly improve the cooling performance.

Taiwan industrial cooperation program technology transfer for low-level radioactive waste final disposal - phase I.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Knowlton, Robert G.; Cochran, John Russell; Arnold, Bill Walter

2007-01-01

Sandia National Laboratories and the Institute of Nuclear Energy Research, Taiwan have collaborated in a technology transfer program related to low-level radioactive waste (LLW) disposal in Taiwan. Phase I of this program included regulatory analysis of LLW final disposal, development of LLW disposal performance assessment capabilities, and preliminary performance assessments of two potential disposal sites. Performance objectives were based on regulations in Taiwan and comparisons to those in the United States. Probabilistic performance assessment models were constructed based on limited site data using software including GoldSim, BLT-MS, FEHM, and HELP. These software codes provided the probabilistic framework, container degradation, waste-formmore » leaching, groundwater flow, radionuclide transport, and cover infiltration simulation capabilities in the performance assessment. Preliminary performance assessment analyses were conducted for a near-surface disposal system and a mined cavern disposal system at two representative sites in Taiwan. Results of example calculations indicate peak simulated concentrations to a receptor within a few hundred years of LLW disposal, primarily from highly soluble, non-sorbing radionuclides.« less

Influence of the type of training task on intermanual transfer effects in upper-limb prosthesis training: A randomized pre-posttest study.

PubMed

Romkema, Sietske; Bongers, Raoul M; van der Sluis, Corry K

2017-01-01

Intermanual transfer, the transfer of motor skills from the trained hand to the untrained hand, can be used to train upper limb prosthesis skills. The aim of this study was to determine the relation between the magnitude of the intermanual transfer effect and the type of training task. The used tasks were based on different aspects of prosthetic handling: reaching, grasping, grip-force production and functional tasks. A single-blinded clinical trial, with a pre-posttest design was executed. Seventy-one able-bodied, right-handed participants were randomly assigned to four training and two control groups. The training groups performed a training program with an upper-limb prosthesis simulator. One control group performed a sham training (a dummy training without the prosthesis simulator) and another control group received no training at all. The training groups and sham group trained on five consecutive days. To determine the improvement in skills, a test was administered before, immediately after, and one week after the training. Training was performed with the 'unaffected' arm; tests were performed with the 'affected' arm, with the latter resembling the amputated limb. In this study half of the participants trained with the dominant hand, while the other half trained with the non-dominant hand. Participants executed four tests that corresponded to the different training tasks. The tests measured the reaching (movement time and symmetry ratio), grasping (opening time, duration of maximum hand opening, and closing time), grip-force production (deviation of asked grip-force) and functional (movement time) performance. Half of the participants were tested with their dominant arm and half of the participants with their non-dominant arm. Intermanual transfer effects were not found for reaching, grasping or functional tasks. However, we did find intermanual transfer effects for grip-force production tasks. Possibly, the study design contributed to the negative results due to the duration of the training sessions and test sessions. The positive results of the grip-force production might be an effect of the specificity of the training, that was totally focused on training grip-force production. When using intermanual transfer training in novice amputees, specific training should be devoted to grip-force.

Influence of the type of training task on intermanual transfer effects in upper-limb prosthesis training: A randomized pre-posttest study

PubMed Central

Romkema, Sietske; Bongers, Raoul M.; van der Sluis, Corry K.

2017-01-01

Intermanual transfer, the transfer of motor skills from the trained hand to the untrained hand, can be used to train upper limb prosthesis skills. The aim of this study was to determine the relation between the magnitude of the intermanual transfer effect and the type of training task. The used tasks were based on different aspects of prosthetic handling: reaching, grasping, grip-force production and functional tasks. A single-blinded clinical trial, with a pre-posttest design was executed. Seventy-one able-bodied, right-handed participants were randomly assigned to four training and two control groups. The training groups performed a training program with an upper-limb prosthesis simulator. One control group performed a sham training (a dummy training without the prosthesis simulator) and another control group received no training at all. The training groups and sham group trained on five consecutive days. To determine the improvement in skills, a test was administered before, immediately after, and one week after the training. Training was performed with the ‘unaffected’ arm; tests were performed with the ‘affected’ arm, with the latter resembling the amputated limb. In this study half of the participants trained with the dominant hand, while the other half trained with the non-dominant hand. Participants executed four tests that corresponded to the different training tasks. The tests measured the reaching (movement time and symmetry ratio), grasping (opening time, duration of maximum hand opening, and closing time), grip-force production (deviation of asked grip-force) and functional (movement time) performance. Half of the participants were tested with their dominant arm and half of the participants with their non-dominant arm. Intermanual transfer effects were not found for reaching, grasping or functional tasks. However, we did find intermanual transfer effects for grip-force production tasks. Possibly, the study design contributed to the negative results due to the duration of the training sessions and test sessions. The positive results of the grip-force production might be an effect of the specificity of the training, that was totally focused on training grip-force production. When using intermanual transfer training in novice amputees, specific training should be devoted to grip-force. PMID:29190727

Pediatric patients transferred for operative management of appendicitis: are they at a disadvantage?

PubMed

Farach, Sandra M; Danielson, Paul D; Walford, N Elizabeth; Harmel, Richard P; Chandler, Nicole M

2015-09-01

Many pediatric patients are initially diagnosed with appendicitis at referring hospitals and are subsequently transferred to pediatric facilities. We aimed to compare outcomes of patients transferred to a pediatric referral center to those who present primarily for operative management of appendicitis. A retrospective review of 326 patients with operative appendicitis from July 2012 to July 2013 was performed. Demographic data, clinical parameters, and outcomes were analyzed. Transferred (n=222, 68%) and primary patients (n=104, 32%) were similar except for mean age (primary 12.4 vs. transferred 11.2 years, p<0.01). Computed tomography scans were performed in 80% of transferred compared to 40% of primary patients. Primary patients were more likely to present between the hours of 09:00 and 17:59 (52%), while transferred arrived equally across all hours. Both groups were more likely to present with acute appendicitis (primary 56% vs. transfer 61%, p=NS). There was no difference in time of diagnosis to time of appendectomy, length of hospital stay, or 30 day complications (primary 8.6% vs. transfer 5.8%, p=NS). Patients transferred for definitive care of appendicitis are not found to have more advanced disease or have increased complications; however, they are exposed to significantly more ionizing radiation during evaluation for appendicitis. Copyright © 2015 Elsevier Inc. All rights reserved.

An evaluation of training effectiveness of an intelligent tutoring system

NASA Technical Reports Server (NTRS)

Johnson, Debra Steele; Pieper, Kalen F.; Culbert, Chris

1992-01-01

The study evaluated the training effectiveness of an intelligent tutoring system (ITS) for the Remote Manipulator System (RMS). The study examined how well individuals learn the training content and skills from the RMS ITS and to what extent the content and skills learned using the ITS transfer to RMS task performance in the SES, a high fidelity simulator. Three astronauts completed 8 2-hour ITS sessions addressing movement in three coordinate systems, grapple, ungrapple, berth, and unberth procedures, and singularities and reach limits. Their performance was also observed in an SES training session. Performance data were collected using multiple measures: ITS task performance, transfer performance on the SES, a conceptual knowledge test, an opinion survey completed by astronauts, and comments and observations from astronauts and trainers. Results indicated the RMS ITS to be moderately effective and provided evidence of the efficacy of ITS's, in general. Comments and suggestions are provided relating to how the ITS could be improved and to enable decision makers to judge the effectiveness of the RMS ITS.

Contributions Regarding the Aircraft Nuclear Propulsion

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mitrica, Bogdan; Petre, Marian; Dima, Mihai Octavian

2010-01-21

The possibility to use a nuclear reactor for airplanes propulsion was investigated taking in to account 2 possible solutions: the direct cycle (where the fluid pass through the reactor's core) and the indirect cycle (where the fluid is passing through a heat exchanger). Taking in to account the radioprotection problems, the only realistic solution seems to be the indirect cycle, where the energy transfer should be performed by a heat exchanger that must work at very high speed of the fluid. The heat exchanger will replace the classical burning room. We had performed a more precise theoretical study for themore » nuclear jet engine regarding the performances of the nuclear reactor, of the heat exchanger and of the jet engine. It was taken in to account that in the moment when the burning room is replaced by a heat exchanger, a new model for gasodynamic process from the engine must be performed. Studies regarding the high flow speed heat transfer were performed.« less

On the Performance of TCP Spoofing in Satellite Networks

NASA Technical Reports Server (NTRS)

Ishac, Joseph; Allman, Mark

2001-01-01

In this paper, we analyze the performance of Transmission Control Protocol (TCP) in a network that consists of both satellite and terrestrial components. One method, proposed by outside research, to improve the performance of data transfers over satellites is to use a performance enhancing proxy often dubbed 'spoofing.' Spoofing involves the transparent splitting of a TCP connection between the source and destination by some entity within the network path. In order to analyze the impact of spoofing, we constructed a simulation suite based around the network simulator ns-2. The simulation reflects a host with a satellite connection to the Internet and allows the option to spoof connections just prior to the satellite. The methodology used in our simulation allows us to analyze spoofing over a large range of file sizes and under various congested conditions, while prior work on this topic has primarily focused on bulk transfers with no congestion. As a result of these simulations, we find that the performance of spoofing is dependent upon a number of conditions.

High-performance ternary blend polymer solar cells involving both energy transfer and hole relay processes

DOE PAGES

Lu, Luyao; Chen, Wei; Xu, Tao; ...

2015-06-04

The integration of multiple materials with complementary absorptions into a single junction device is regarded as an efficient way to enhance the power conversion efficiency (PCE) of organic solar cells (OSCs). However, because of increased complexity with one more component, only limited high-performance ternary systems have been demonstrated previously. Here we report an efficient ternary blend OSC with a PCE of 9.2%. We show that the third component can reduce surface trap densities in the ternary blend. Detailed studies unravel that the improved performance results from synergistic effects of enlarged open circuit voltage, suppressed trap-assisted recombination, enhanced light absorption, increasedmore » hole extraction, efficient energy transfer and better morphology. As a result, the working mechanism and high device performance demonstrate new insights and design guidelines for high-performance ternary blend solar cells and suggest that ternary structure is a promising platform to boost the efficiency of OSCs.« less

Assessing written communication during interhospital transfers of emergency general surgery patients

PubMed Central

Harl, Felicity N.R.; Saucke, Megan C.; Greenberg, Caprice C.; Ingraham, Angela M.

2017-01-01

Background Poor communication causes fragmented care. Studies of transitions of care within a hospital and on discharge suggest significant communication deficits. Communication during transfers between hospitals has not been well studied. We assessed the written communication provided during interhospital transfers of emergency general surgery patients. We hypothesized that patients are transferred with incomplete documentation from referring facilities. Methods We performed a retrospective review of written communication provided during interhospital transfers to our emergency department (ED) from referring EDs for emergency general surgical evaluation between January 1, 2014 and January 1, 2016. Elements of written communication were abstracted from referring facility documents scanned into the medical record using a standardized abstraction protocol. Descriptive statistics summarized the information communicated. Results A total of 129 patients met inclusion criteria. 87.6% (n = 113) of charts contained referring hospital documents. 42.5% (n = 48) were missing history and physicals. Diagnoses were missing in 9.7% (n = 11). Ninety-one computed tomography scans were performed; a mong 70 with reads, final reads were absent for 70.0% (n = 49). 45 ultrasounds and x-rays were performed; among 27 with reads, final reads were missing for 80.0% (n = 36). Reasons for transfer were missing in 18.6% (n = 21). Referring hospital physicians outside the ED were consulted in 32.7% (n = 37); consultants’ notes were absent in 89.2% (n = 33). In 12.4% (n = 14), referring documents arrived after the patient’s ED arrival and were not part of the original documentation provided. Conclusions This study documents that information important to patient care is often missing in the written communication provided during interhospital transfers. This gap affords a foundation for standardizing provider communication during interhospital transfers. PMID:28624064

Task complexity and maximal isometric strength gains through motor learning

PubMed Central

McGuire, Jessica; Green, Lara A.; Gabriel, David A.

2014-01-01

Abstract This study compared the effects of a simple versus complex contraction pattern on the acquisition, retention, and transfer of maximal isometric strength gains and reductions in force variability. A control group (N = 12) performed simple isometric contractions of the wrist flexors. An experimental group (N = 12) performed complex proprioceptive neuromuscular facilitation (PNF) contractions consisting of maximal isometric wrist extension immediately reversing force direction to wrist flexion within a single trial. Ten contractions were completed on three consecutive days with a retention and transfer test 2‐weeks later. For the retention test, the groups performed their assigned contraction pattern followed by a transfer test that consisted of the other contraction pattern for a cross‐over design. Both groups exhibited comparable increases in strength (20.2%, P < 0.01) and reductions in mean torque variability (26.2%, P < 0.01), which were retained and transferred. There was a decrease in the coactivation ratio (antagonist/agonist muscle activity) for both groups, which was retained and transferred (35.2%, P < 0.01). The experimental group exhibited a linear decrease in variability of the torque‐ and sEMG‐time curves, indicating transfer to the simple contraction pattern (P < 0.01). The control group underwent a decrease in variability of the torque‐ and sEMG‐time curves from the first day of training to retention, but participants returned to baseline levels during the transfer condition (P < 0.01). However, the difference between torque RMS error versus the variability in torque‐ and sEMG‐time curves suggests the demands of the complex task were transferred, but could not be achieved in a reproducible way. PMID:25428951

Experiencing a reaching task passively with one arm while adapting to a visuomotor rotation with the other can lead to substantial transfer of motor learning across the arms.

PubMed

Bao, Shancheng; Lei, Yuming; Wang, Jinsung

2017-01-18

The extent of transfer following visuomotor adaptation across the arms is typically limited as compared to that within the same arm. However, we have demonstrated that interlimb transfer can occur nearly completely if one arm performs reaching movements associated with a desired trajectory repeatedly and actively during an initial training session in which the other arm adapts to a novel visuomotor adaptation. Based on that finding, we argued that the absence of instances associated with specific motor effectors is the major reason for limited interlimb transfer. Here, we examined whether providing movement instances associated with one arm passively while adapting to a visuomotor rotation with the opposite arm could also lead to a greater extent of interlimb transfer. We had subjects perform reaching movements either actively or passively with the right arm while adapting to a 30° visuomotor rotation with the left arm (training session), and then had them perform reaching movements under the rotation condition with the right arm (transfer session). Results showed that the extent of transfer observed in the active and the passive training groups was significantly greater than that observed in a control group who only experienced the testing session. This finding suggests that providing effector-specific instances can increase the extent of interlimb transfer substantially, regardless of whether the instances are provided actively or passively. The current finding may have implications for neurorehabilitation targeted for individuals with motor impairment, such as persons with stroke or spinal cord injury. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

a Comparison of Two Strategies for Avoiding Negative Transfer in Domain Adaptation Based on Logistic Regression

NASA Astrophysics Data System (ADS)

Paul, A.; Vogt, K.; Rottensteiner, F.; Ostermann, J.; Heipke, C.

2018-05-01

In this paper we deal with the problem of measuring the similarity between training and tests datasets in the context of transfer learning (TL) for image classification. TL tries to transfer knowledge from a source domain, where labelled training samples are abundant but the data may follow a different distribution, to a target domain, where labelled training samples are scarce or even unavailable, assuming that the domains are related. Thus, the requirements w.r.t. the availability of labelled training samples in the target domain are reduced. In particular, if no labelled target data are available, it is inherently difficult to find a robust measure of relatedness between the source and target domains. This is of crucial importance for the performance of TL, because the knowledge transfer between unrelated data may lead to negative transfer, i.e. to a decrease of classification performance after transfer. We address the problem of measuring the relatedness between source and target datasets and investigate three different strategies to predict and, consequently, to avoid negative transfer in this paper. The first strategy is based on circular validation. The second strategy relies on the Maximum Mean Discrepancy (MMD) similarity metric, whereas the third one is an extension of MMD which incorporates the knowledge about the class labels in the source domain. Our method is evaluated using two different benchmark datasets. The experiments highlight the strengths and weaknesses of the investigated methods. We also show that it is possible to reduce the amount of negative transfer using these strategies for a TL method and to generate a consistent performance improvement over the whole dataset.

Improvement of the Asia-Pacific TWSTFT network solutions by using DPN results.

PubMed

Lin, Huang-Tien; Huang, Yi-Jiun; Liao, Chia-Shu; Chu, Fang-Dar; Tseng, Wen-Hung

2012-03-01

Two major time and frequency transfer techniques, two-way satellite time and frequency transfer (TWSTFT) and global navigation satellite systems (GNSS: GPS, GALILEO, GLONASS, etc.), are used for the generation of Coordinated Universal Time (UTC)/International Atomic Time (TAI). These time and frequency transfer links comprise a worldwide network and the utilization of the highly redundant time and frequency data is an important topic. Two methods, either TW-only network (i.e., TWSTFT) or single-link combination of TW and Global Positioning System (GPS), have been developed for combining the redundant data from different techniques. In our previous study, we have proposed a feasible method, utilizing full time-transfer network data, to improve the results of TWSTFT network. The National Institute of Information and Communications Technology (NICT) has recently developed a software-based two-way time-transfer modem using a dual pseudo-random noise (DPN) signal. The first international DPN TWSTFT experiment, using these modems, was performed between NICT (Japan) and Telecommunication Laboratories (TL; Taiwan)and its ability to improve the time transfer precision was demonstrated. In comparison with the conventional NICT–TLTWSTFT link, the DPN time transfer results have higher precision and lower diurnal effects. The estimation also shows that DPN is comparable to GPS precise point positioning (PPP).Because the DPN results show better performance than the conventional TWSTFT results, we would adopt the DPN data for the NICT–TL link and solve the TW+DPN network solutions by using our proposed method. The concept of this application is similar to the so-called multi-technique-network time/frequency transfer. The encouraging results confirm that the TWSTFT network performance can benefit from DPN data by improving short-term stabilities and reducing diurnal effects.The results of TW+PPP network solutions are also illustrated.

The experimental study of heat transfer around molds inside a model autoclave

NASA Astrophysics Data System (ADS)

Ghamlouch, Taleb; Roux, Stéphane; Lefèvre, Nicolas; Bailleul, Jean-Luc; Sobotka, Vincent

2018-05-01

The temperature distribution within composite parts manufactured inside autoclaves plays a key role in determining the parts quality at the end of the curing cycle. Indeed, heat transfer between the parts and the surroundings inside an autoclave is strongly coupled with the flow field around the molds and can be modeled through the convective heat transfer coefficient (HTC). The aerodynamically unsuitable geometry of the molds generates complex turbulent non-uniform flows around them accompanied with the presence of dead zones. This heterogeneity can imply non-uniform convective heat transfers leading to temperature gradients inside parts that can be prejudicial. Given this fact, the purpose of this study is to perform experimental measurements in order to describe the flow field and the convective heat transfer behavior around representative industrial molds installed inside a home-made model. A key point of our model autoclave is the ease of use of non-intrusive measuring instruments: the Particle Image Velocimetry (PIV) technique and infrared imaging camera for the study of the flow field and the heat transfer coefficient distribution around the molds respectively. The experimental measurements are then compared to computational fluid dynamics (CFD) calculations performed on the computer code ANSYS Fluent 16.0®. This investigation has revealed, as expected, a non-uniform distribution of the convective heat transfer coefficient around the molds and therefore the presence of thermal gradients which can reduce the composite parts quality during an autoclave process. A good agreement has been achieved between the experimental and the numerical results leading then to the validation of the performed numerical simulations.

Analyses and Comparison of Solar Air Heater with Various Rib Roughness using Computational Fluid Dynamics (CFD)

NASA Astrophysics Data System (ADS)

Kumar, K. Ravi; Cheepu, Muralimohan; Srinivas, B.; Venkateswarlu, D.; Pramod Kumar, G.; Shiva, Apireddi

2018-03-01

In solar air heater, artificial roughness on absorber plate become prominent technique to improving heat transfer rate of air flowing passage as a result of laminar sublayer. The selection of rib geometries plays important role on friction characteristics and heat transfer rate. Many researchers studying the roughness shapes over the years to investigate the effect of geometries on the performance of friction factor and heat transfer of the solar air heater. The present study made an attempt to develop the different rib shapes utilised for creating artificial rib roughness and its comparison to investigate higher performance of the geometries. The use of computational fluid dynamics software resulted in correlation of friction factor and heat transfer rate. The simulations studies were performed on 2D computational fluid dynamics model and analysed to identify the most effective parameters of relative roughness of the height, width and pitch on major considerations of friction factor and heat transfer. The Reynolds number is varied in a range from 3000 to 20000, in the current study and modelling has conducted on heat transfer and turbulence phenomena by using Reynolds number. The modelling results showed the formation of strong vortex in the main stream flow due to the right angle triangle roughness over the square, rectangle, improved rectangle and equilateral triangle geometries enhanced the heat transfer extension in the solar air heater. The simulation of the turbulence kinetic energy of the geometry suggests the local turbulence kinetic energy has been influenced strongly by the alignments of the right angle triangle.

Effects of task repetition but no transfer of inhibitory control training in healthy adults.

PubMed

Talanow, Tobias; Ettinger, Ulrich

2018-06-01

Executive functions (EFs) comprise the updating, shifting and inhibition dimensions. According to the Unity and Diversity Model, the inhibition dimension is fully accounted for by a general EFs factor. This suggests that training of inhibition should transfer, in part, to updating and shifting. Therefore, we tested the effectiveness of a three-week inhibition training (high-conflict Stroop task) and explored near transfer effects to an untrained inhibition task (antisaccade task) and far transfer effects to untrained tasks demanding task-set shifting (number-letter-task), working memory updating (n-back task) and planning abilities (Stockings of Cambridge task). We employed a randomized pretest/treatment/posttest study design in n = 102 healthy young adults, assigned to an intensive Stroop training (n = 38), an active control condition (n = 34) or no training intervention (n = 30). In the Stroop training group, Stroop performance improved with practice, while performance in the active control group remained unchanged. The Stroop training group showed improvements in overall Stroop task performance from pretest to posttest, but we observed neither near nor far transfer effects. Additionally, specifically stronger gains on incongruent Stroop trials compared to congruent trials were observed in the Stroop training group when color bar trials were excluded from the pretest-posttest-analysis. Generally, there were substantial improvements from pretest to posttest independent of training condition in all transfer tasks. In sum, our data do not support the existence of transfer effects from inhibition training in healthy young adults. Copyright © 2018 Elsevier B.V. All rights reserved.

Reusing Migration to Simply and Efficiently Implement Multi-Server Operations in Transparently Scalable Storage Systems

DTIC Science & Technology

2010-05-01

support multi-server operations, demonstrating the feasibility of the approach. Fourth, it evaluates the prototype to show that performance is reasonable ...architects make many such trade- offs in the course of designing a system. If the architect’s goal is the best possible performance at any cost, then...needs to be transferred, and the unit is reasonably sized (a directory or a small number of directories), the transfer latency can also be small

Cryogenic and thermal design for the Superfluid Helium On-Orbit Transfer (SHOOT) experiment

NASA Technical Reports Server (NTRS)

Lee, J. H.; Maa, S.; Brooks, W. F.; Ng, Y. S.

1988-01-01

The analysis and trade-offs of the external thermal design of the two 200-liter dewars required in the SHOOT experiment to extend space mission life by superfluid helium replenishment are discussed. Also considered are the support electronics and the optimization and prediction of the performance of the dewar and cryostat assemblies. Particular attention is given to the ground-hold and standby performance of the dewars, along with the temperature of the helium bath during high-flow-rate helium transfers.

Orbit Transfer Vehicle (OTV) advanced expander cycle engine point design study. Volume 2: Study results

NASA Technical Reports Server (NTRS)

1980-01-01

Detailed computer models of the engine were developed to predict both the steady state and transient operation of the engine system. Mechanical design layout drawings were prepared for the following components: thrust chamber and nozzle; extendible nozzle actuating mechanism and seal; LOX turbopump and boost pump; hydrogen turbopump and boost pump; and the propellant control valves. The necessary heat transfer, stress, fluid flow, dynamic, and performance analyses were performed to support the mechanical design.

Variances in solar collector performance predictions due to different methods of evaluating wind heat transfer coefficients

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ramsey, J.W.; Charmchi, M.

1980-11-01

The performance of several solar collector configurations has been predicted using both inappropriate and appropriate relations to evaluate the wind-related heat transfer coefficient. The combinations analyzed are: one or two covers and a selectively absorbing surface coating, and one or two covers and a nonselectively absorbing surface coating all collectors are of the basic liquid heating type. It is shown that the optimum results are obtained by using a global correlation equation proposed by Sparrow et al. (1979).

Thermal Performance of Surface Wick Structures.

NASA Astrophysics Data System (ADS)

Chen, Yongkang; Tavan, Noel; Baker, John; Melvin, Lawrence; Weislogel, Mark

2010-03-01

Microscale surface wick structures that exploit capillary driven flow in interior corners have been designed. In this study we examine the interplay between capillary flow and evaporative heat transfer that effectively reduces the surface temperature. The tests are performed by raising the surface temperature to various levels before the flow is introduced to the surfaces. Certainly heat transfer weakens the capillary driven flow. It is observed, however, the surface temperature can be reduced significantly. The effects of geometric parameters and interconnectivity are to be characterized to identify optimal configurations.

Dual nozzle aerodynamic and cooling analysis study. [dual throat and dual expander nozzles

NASA Technical Reports Server (NTRS)

Meagher, G. M.

1980-01-01

Geometric, aerodynamic flow field, performance prediction, and heat transfer analyses are considered for two advanced chamber nozzle concepts applicable to Earth-to-orbit engine systems. Topics covered include improvements to the dual throat aerodynamic and performance prediction program; geometric and flow field analyses of the dual expander concept; heat transfer analysis of both concepts, and engineering analysis of data from the NASA/MSFC hot-fire testing of a dual throat thruster model thrust chamber assembly. Preliminary results obtained are presented in graphs.

Transferable and flexible label-like macromolecular memory on arbitrary substrates with high performance and a facile methodology.

PubMed

Lai, Ying-Chih; Hsu, Fang-Chi; Chen, Jian-Yu; He, Jr-Hau; Chang, Ting-Chang; Hsieh, Ya-Ping; Lin, Tai-Yuan; Yang, Ying-Jay; Chen, Yang-Fang

2013-05-21

A newly designed transferable and flexible label-like organic memory based on a graphene electrode behaves like a sticker, and can be readily placed on desired substrates or devices for diversified purposes. The memory label reveals excellent performance despite its physical presentation. This may greatly extend the memory applications in various advanced electronics and provide a simple scheme to integrate with other electronics. Copyright © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

A Study of Waste-Heat-Boiler Size and Performance of a Conceptual Marine COGAS System.

DTIC Science & Technology

1980-02-01

The addition of a waste-heat boiler which extracts heat from the gas turbine exhaust gas to operate a bottoming Rankine cycle is one way to improve the...do not change significantly. Higher saturation pressure actually results in a somewhat lower boiler heat transfer, but the Rankine - cycle performance...of heat transferred in the waste-heat boiler and (2) the conversion efficiency of the Rankine cycle . In sizing the waste-heat boiler, attention was

Lateral directional requirements for a low L/D aeromaneuvering orbital transfer vehicle

NASA Technical Reports Server (NTRS)

Gamble, J. D.; Spratlin, K. M.; Skalecki, L. M.

1984-01-01

The lateral-directional aerodynamics and control requirements for a low L/D (0.3) aeromaneuvering orbital transfer vehicle are evaluated. A lateral directional RCS control concept that permits a linearized analysis is utilized to evaluate the effect of Dutch Roll frequency and damping on the atmospheric guidance and control performance. The bank rate and acceleration requirements for acceptable performance are defined and the sensitivity to a parameter similar to the lateral control departure parameter but involving the RCS jets is evaluated.

Contractor Performed Quality Control on KyTC Projects.

DOT National Transportation Integrated Search

2002-08-01

This report addresses issues related to transferring the responsibility for quality control from the Kentucky Transportation Cabinet (KyTC) to construction contractors. : Several key topics related to Contractor Performed Quality Control (CPQC) are p...

Performance of self-consolidating concrete in prestressed girders.

DOT National Transportation Integrated Search

2010-04-01

A structural investigation of self-consolidating concrete (SCC) in AASHTO Type I precast, : prestressed girders was performed. Six test girders were subjected to transfer length and : flexural testing. Three separate concrete mixtures, two girders pe...

Learning Transfer: The Views of Practitioners in Ireland

ERIC Educational Resources Information Center

Donovan, Paul; Darcy, David P.

2011-01-01

Considerable expenditure on human resource development (HRD) has not necessarily resulted in a significant impact on organizational performance, and research suggests that the failure to transfer learning may be an important explanation. The search for factors affecting transfer has been extensive, as shown in Grossman and Salas's article in this…

Learning Transfer and Its Intentionality in Adult and Continuing Education

ERIC Educational Resources Information Center

Foley, Jeffrey M.; Kaiser, Leann M. R.

2013-01-01

Broad (1997) defined learning transfer as the "effective and continuing application by learners--to their performance of jobs or other individual, organizational, or community responsibilities--of knowledge and skills gained in the learning activities" (p. 2). This chapter offers an introduction to learning transfer and the major concepts related…

Modelling Graduate Skill Transfer from University to the Workplace

ERIC Educational Resources Information Center

Jackson, Denise

2016-01-01

This study explores skill transfer in graduates as they transition from university to the workplace. Graduate employability continues to dominate higher education agendas yet the transfer of acquired skills is often assumed. The study is prompted by documented concern with graduate performance in certain employability skills, and prevalent skill…

77 FR 38865 - Proposed Collection; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-29

...) (17 CFR 240.17Ad-4) is used to document when transfer agents are exempt, or no longer exempt, from the minimum performance standards and certain recordkeeping provisions of the Commission's transfer agent rules. Rule 17Ad-4(c) sets forth the conditions under which a registered transfer agent loses its exempt...

Improvements in motor tasks through the use of smartphone technology for individuals with Duchenne muscular dystrophy.

PubMed

Capelini, Camila Miliani; da Silva, Talita Dias; Tonks, James; Watson, Suzanna; Alvarez, Mayra Priscila Boscolo; de Menezes, Lilian Del Ciello; Favero, Francis Meire; Caromano, Fátima Aparecida; Massetti, Thais; de Mello Monteiro, Carlos Bandeira

2017-01-01

In individuals severely affected with Duchenne muscular dystrophy (DMD), virtual reality has recently been used as a tool to enhance community interaction. Smartphones offer the exciting potential to improve communication, access, and participation, and present the unique opportunity to directly deliver functionality to people with disabilities. To verify whether individuals with DMD improve their motor performance when undertaking a visual motor task using a smartphone game. Fifty individuals with DMD and 50 healthy, typically developing (TD) controls, aged 10-34 years participated in the study. The functional characterization of the sample was determined through Vignos, Egen Klassifikation, and the Motor Function Measure scales. To complete the task, individuals moved a virtual ball around a virtual maze and the time in seconds was measured after every attempt in order to analyze improvement of performance after the practice trials. Motor performance (time to finish each maze) was measured in phases of acquisition, short-term retention, and transfer. Use of the smartphone maze game promoted improvement in performance during acquisition in both groups, which remained in the retention phase. At the transfer phases, with alternative maze tasks, the performance in DMD group was similar to the performance of TD group, with the exception of the transfer to the contralateral hand (nondominant). However, the group with DMD demonstrated longer movement time at all stages of learning, compared with the TD group. The practice of a visual motor task delivered via smartphone game promoted an improvement in performance with similar patterns of learning in both groups. Performance can be influenced by task difficulty, and for people with DMD, motor deficits are responsible for the lower speed of execution. This study indicates that individuals with DMD showed improved performance in a short-term motor learning protocol using a smartphone. We advocate that this technology could be used to promote function in this population.

Improvements in motor tasks through the use of smartphone technology for individuals with Duchenne muscular dystrophy

PubMed Central

Capelini, Camila Miliani; da Silva, Talita Dias; Tonks, James; Watson, Suzanna; Alvarez, Mayra Priscila Boscolo; de Menezes, Lilian Del Ciello; Favero, Francis Meire; Caromano, Fátima Aparecida; Massetti, Thais; de Mello Monteiro, Carlos Bandeira

2017-01-01

Background In individuals severely affected with Duchenne muscular dystrophy (DMD), virtual reality has recently been used as a tool to enhance community interaction. Smartphones offer the exciting potential to improve communication, access, and participation, and present the unique opportunity to directly deliver functionality to people with disabilities. Objective To verify whether individuals with DMD improve their motor performance when undertaking a visual motor task using a smartphone game. Patients and methods Fifty individuals with DMD and 50 healthy, typically developing (TD) controls, aged 10–34 years participated in the study. The functional characterization of the sample was determined through Vignos, Egen Klassifikation, and the Motor Function Measure scales. To complete the task, individuals moved a virtual ball around a virtual maze and the time in seconds was measured after every attempt in order to analyze improvement of performance after the practice trials. Motor performance (time to finish each maze) was measured in phases of acquisition, short-term retention, and transfer. Results Use of the smartphone maze game promoted improvement in performance during acquisition in both groups, which remained in the retention phase. At the transfer phases, with alternative maze tasks, the performance in DMD group was similar to the performance of TD group, with the exception of the transfer to the contralateral hand (nondominant). However, the group with DMD demonstrated longer movement time at all stages of learning, compared with the TD group. Conclusion The practice of a visual motor task delivered via smartphone game promoted an improvement in performance with similar patterns of learning in both groups. Performance can be influenced by task difficulty, and for people with DMD, motor deficits are responsible for the lower speed of execution. This study indicates that individuals with DMD showed improved performance in a short-term motor learning protocol using a smartphone. We advocate that this technology could be used to promote function in this population. PMID:28860778

The Effect of Earning an Associate Degree on Community College Transfer Students' Performance and Success at Four-Year Institutions

ERIC Educational Resources Information Center

Wang, Xueli; Chuang, Yating; McCready, Bo

2017-01-01

Background/Context: As the cost of postsecondary education continues to rise, more students begin their postsecondary careers at a community college with the ultimate goal of upward transfer. However, there is limited evidence regarding how earning an associate degree prior to transfer shape transfer students' eventual success at baccalaureate…

Two-Year Comparison of Transfer and Native Student Academic Performance: University of Illinois at Urbana-Champaign, Fall 1986 Group.

ERIC Educational Resources Information Center

Heiser, Linda M.; Abbed, Nejla

In 1989, a two-year study was completed comparing the academic progress of community college transfers, senior college transfers, and continuing juniors (natives) at the University of Illinois at Urbana-Champaign (UIUC). The study samples were comprised of 673 former community college students and 393 senior college transfers who entered UIUC in…

The Influence of the Inner Topology of Cooling Units on the Performance of Automotive Exhaust-Based Thermoelectric Generators

NASA Astrophysics Data System (ADS)

Zhu, D. C.; Su, C. Q.; Deng, Y. D.; Wang, Y. P.; Liu, X.

2017-11-01

Automotive exhaust-based thermoelectric generators are currently a hot topic in energy recovery. The waste heat of automotive exhaust gas can be converted into electricity by means of thermoelectric modules. Generally, inserting fins into the cooling unit contributes to enhancing the heat transfer for a higher power output. However, the introduction of fins will result in a pressure drop in the cooling system. In current research, in order to enhance the heat transfer and avoid a large pressure drop, a cooling unit with cylindrical grooves on the interior surface was proposed. To evaluate the performance of the cylindrical grooves, different inner topologies, including a smooth interior surface,a smooth interior surface with inserted fins and an interior surface with cylindrical grooves, were compared. The results revealed that compared with the smooth interior surface, the smooth interior surface with inserted fins and the interior surface with cylindrical grooves both enhanced the heat transfer, but the interior surface with cylindrical grooves obtained a lower pressure drop. To improve the performance of the cylindrical grooves, different groove-depth ratios were tried, and the results showed that a groove-depth ratio of 0.081 could provide the best overall performance.

Investigation of internally finned LED heat sinks

NASA Astrophysics Data System (ADS)

Li, Bin; Xiong, Lun; Lai, Chuan; Tang, Yumei

2018-03-01

A novel heat sink is proposed, which is composed of a perforated cylinder and internally arranged fins. Numerical studies are performed on the natural convection heat transfer from internally finned heat sinks; experimental studies are carried out to validate the numerical results. To compare the thermal performances of internally finned heat sinks and externally finned heat sinks, the effects of the overall diameter, overall height, and installation direction on maximum temperature, air flow and heat transfer coefficient are investigated. The results demonstrate that internally finned heat sinks show better thermal performance than externally finned heat sinks; the maximum temperature of internally finned heat sinks decreases by up to 20% compared with the externally finned heat sinks. The existence of a perforated cylinder and the installation direction of the heat sink affect the thermal performance significantly; it is shown that the heat transfer coefficient of the heat sink with the perforated cylinder is improved greater than that with the imperforated cylinder by up to 34%, while reducing the mass of the heat sink by up to 13%. Project supported by the Scientific Research Fund of Sichuan Provincial Education Department (No. 18ZB0516) and the Sichuan University of Arts and Science (No. 2016KZ009Y).

Expectancy of an open-book test decreases performance on a delayed closed-book test.

PubMed

Agarwal, Pooja K; Roediger, Henry L

2011-11-01

Two experiments examined the influence of practice with, and the expectancy of, open-book tests (students viewed studied material while taking the test) versus closed-book tests (students completed the test without viewing the studied material) on delayed retention and transfer. Using GRE materials specifically designed for open-book testing, participants studied passages and then took initial open- or closed-book tests. Open-book testing led to better initial performance than closed-book testing, but on a delayed criterial (closed-book) test both types of testing produced similar retention after a two-day delay in Experiment 1. In Experiment 2 participants were informed in advance about the type of delayed criterial test to expect (open- or closed-book). Expecting an open-book test (relative to a closed-book test) decreased participants' time spent studying and their delayed test performance on closed-book comprehension and transfer tests, demonstrating that test expectancy can influence long-term learning. Expectancy of open-book tests may impair long-term retention and transfer compared to closed-book tests, despite superior initial performance on open-book tests and students' preference for open-book tests.

The Influence of the Inner Topology of Cooling Units on the Performance of Automotive Exhaust-Based Thermoelectric Generators

NASA Astrophysics Data System (ADS)

Zhu, D. C.; Su, C. Q.; Deng, Y. D.; Wang, Y. P.; Liu, X.

2018-06-01

Automotive exhaust-based thermoelectric generators are currently a hot topic in energy recovery. The waste heat of automotive exhaust gas can be converted into electricity by means of thermoelectric modules. Generally, inserting fins into the cooling unit contributes to enhancing the heat transfer for a higher power output. However, the introduction of fins will result in a pressure drop in the cooling system. In current research, in order to enhance the heat transfer and avoid a large pressure drop, a cooling unit with cylindrical grooves on the interior surface was proposed. To evaluate the performance of the cylindrical grooves, different inner topologies, including a smooth interior surface,a smooth interior surface with inserted fins and an interior surface with cylindrical grooves, were compared. The results revealed that compared with the smooth interior surface, the smooth interior surface with inserted fins and the interior surface with cylindrical grooves both enhanced the heat transfer, but the interior surface with cylindrical grooves obtained a lower pressure drop. To improve the performance of the cylindrical grooves, different groove-depth ratios were tried, and the results showed that a groove-depth ratio of 0.081 could provide the best overall performance.

Mirror Visual Feedback Training Improves Intermanual Transfer in a Sport-Specific Task: A Comparison between Different Skill Levels.

PubMed

Steinberg, Fabian; Pixa, Nils Henrik; Doppelmayr, Michael

2016-01-01

Mirror training therapy is a promising tool to initiate neural plasticity and facilitate the recovery process of motor skills after diseases such as stroke or hemiparesis by improving the intermanual transfer of fine motor skills in healthy people as well as in patients. This study evaluated whether these augmented performance improvements by mirror visual feedback (MVF) could be used for learning a sport-specific skill and if the effects are modulated by skill level. A sample of 39 young, healthy, and experienced basketball and handball players and 41 novices performed a stationary basketball dribble task at a mirror box in a standing position and received either MVF or direct feedback. After four training days using only the right hand, performance of both hands improved from pre- to posttest measurements. Only the left hand (untrained) performance of the experienced participants receiving MVF was more pronounced than for the control group. This indicates that intermanual motor transfer can be improved by MVF in a sport-specific task. However, this effect cannot be generalized to motor learning per se since it is modulated by individuals' skill level, a factor that might be considered in mirror therapy research.

Mirror Visual Feedback Training Improves Intermanual Transfer in a Sport-Specific Task: A Comparison between Different Skill Levels

PubMed Central

Pixa, Nils Henrik; Doppelmayr, Michael

2016-01-01

Mirror training therapy is a promising tool to initiate neural plasticity and facilitate the recovery process of motor skills after diseases such as stroke or hemiparesis by improving the intermanual transfer of fine motor skills in healthy people as well as in patients. This study evaluated whether these augmented performance improvements by mirror visual feedback (MVF) could be used for learning a sport-specific skill and if the effects are modulated by skill level. A sample of 39 young, healthy, and experienced basketball and handball players and 41 novices performed a stationary basketball dribble task at a mirror box in a standing position and received either MVF or direct feedback. After four training days using only the right hand, performance of both hands improved from pre- to posttest measurements. Only the left hand (untrained) performance of the experienced participants receiving MVF was more pronounced than for the control group. This indicates that intermanual motor transfer can be improved by MVF in a sport-specific task. However, this effect cannot be generalized to motor learning per se since it is modulated by individuals' skill level, a factor that might be considered in mirror therapy research. PMID:27642526

Evaluating brain-computer interface performance using color in the P300 checkerboard speller.

PubMed

Ryan, D B; Townsend, G; Gates, N A; Colwell, K; Sellers, E W

2017-10-01

Current Brain-Computer Interface (BCI) systems typically flash an array of items from grey to white (GW). The objective of this study was to evaluate BCI performance using uniquely colored stimuli. In addition to the GW stimuli, the current study tested two types of color stimuli (grey to color [GC] and color intensification [CI]). The main hypotheses were that in a checkboard paradigm, unique color stimuli will: (1) increase BCI performance over the standard GW paradigm; (2) elicit larger event-related potentials (ERPs); and, (3) improve offline performance with an electrode selection algorithm (i.e., Jumpwise). Online results (n=36) showed that GC provides higher accuracy and information transfer rate than the CI and GW conditions. Waveform analysis showed that GC produced higher amplitude ERPs than CI and GW. Information transfer rate was improved by the Jumpwise-selected channel locations in all conditions. Unique color stimuli (GC) improved BCI performance and enhanced ERPs. Jumpwise-selected electrode locations improved offline performance. These results show that in a checkerboard paradigm, unique color stimuli increase BCI performance, are preferred by participants, and are important to the design of end-user applications; thus, could lead to an increase in end-user performance and acceptance of BCI technology. Copyright © 2017 International Federation of Clinical Neurophysiology. All rights reserved.

Full scale evaluation of diffuser ageing with clean water oxygen transfer tests.

PubMed

Krampe, J

2011-01-01

Aeration is a crucial part of the biological wastewater treatment in activated sludge systems and the main energy user of WWTPs. Approximately 50 to 60% of the total energy consumption of a WWTP can be attributed to the aeration system. The performance of the aeration system, and in the case of fine bubble diffused aeration the diffuser performance, has a significant impact on the overall plant efficiency. This paper seeks to isolate the changes of the diffuser performance over time by eliminating all other influencing parameters like sludge retention time, surfactants and reactor layout. To achieve this, different diffusers have been installed and tested in parallel treatment trains in two WWTPs. The diffusers have been performance tested in clean water tests under new conditions and after one year of operation. A set of material property tests describing the diffuser membrane quality was also performed. The results showed a significant drop in the performance of the EPDM diffuser in the first year which resulted in similar oxygen transfer efficiency around 16 g/m3/m for all tested systems. Even though the tested silicone diffusers did not show a drop in performance they had a low efficiency in the initial tests. The material properties indicate that the EPDM performance loss is partly due to the washout of additives.

Evaluation of a method for heat transfer measurements and thermal visualization using a composite of a heater element and liquid crystals. [thermal performance of turbine blade cooling configurations

NASA Technical Reports Server (NTRS)

Hippensteele, S. A.; Russell, L. M.; Stepka, F. S.

1981-01-01

Commercially available elements of a composite consisting of a plastic sheet coated with liquid crystal, another sheet with a thin layer of a conducting material (gold or carbon), and copper bus bar strips were evaluated and found to provide a simple, convenient, accurate, and low-cost measuring device for use in heat transfer research. The particular feature of the composite is its ability to obtain local heat transfer coefficients and isotherm patterns that provide visual evaluation of the thermal performances of turbine blade cooling configurations. Examples of the use of the composite are presented.

Enhancing NMR of insensitive nuclei by transfer of SABRE spin hyperpolarization

NASA Astrophysics Data System (ADS)

Pravdivtsev, Andrey N.; Yurkovskaya, Alexandra V.; Zimmermann, Herbert; Vieth, Hans-Martin; Ivanov, Konstantin L.

2016-09-01

We describe the performance of methods for enhancing NMR (Nuclear Magnetic Resonance) signals of "insensitive", but important NMR nuclei, which are based on the SABRE (Signal Amplification By Reversible Exchange) technique, i.e., on spin order transfer from parahydrogen (H2 molecule in its nuclear singlet spin state) to a substrate in a transient organometallic complex. Here such transfer is performed at high magnetic fields by INEPT-type NMR pulse sequences, modified for SABRE. Signal enhancements up to three orders of magnitude are obtained for 15N nuclei; the possibility of sensitive detection of 2D-NMR 1H-15N spectra of SABRE complexes and substrates is demonstrated.

Allowable compressive stress at prestress transfer.

DOT National Transportation Integrated Search

2008-12-01

In 2004, The Texas Department of Transportation initiated Project 5197 to investigate the feasibility of : increasing the allowable compressive stress limit at prestress transfer. Initially, the live load performance of 36 : specimens was evaluated b...

Centralized PI control for high dimensional multivariable systems based on equivalent transfer function.

PubMed

Luan, Xiaoli; Chen, Qiang; Liu, Fei

2014-09-01

This article presents a new scheme to design full matrix controller for high dimensional multivariable processes based on equivalent transfer function (ETF). Differing from existing ETF method, the proposed ETF is derived directly by exploiting the relationship between the equivalent closed-loop transfer function and the inverse of open-loop transfer function. Based on the obtained ETF, the full matrix controller is designed utilizing the existing PI tuning rules. The new proposed ETF model can more accurately represent the original processes. Furthermore, the full matrix centralized controller design method proposed in this paper is applicable to high dimensional multivariable systems with satisfactory performance. Comparison with other multivariable controllers shows that the designed ETF based controller is superior with respect to design-complexity and obtained performance. Copyright © 2014 ISA. Published by Elsevier Ltd. All rights reserved.

Perceptual learning in temporal discrimination: asymmetric cross-modal transfer from audition to vision.

PubMed

Bratzke, Daniel; Seifried, Tanja; Ulrich, Rolf

2012-08-01

This study assessed possible cross-modal transfer effects of training in a temporal discrimination task from vision to audition as well as from audition to vision. We employed a pretest-training-post-test design including a control group that performed only the pretest and the post-test. Trained participants showed better discrimination performance with their trained interval than the control group. This training effect transferred to the other modality only for those participants who had been trained with auditory stimuli. The present study thus demonstrates for the first time that training on temporal discrimination within the auditory modality can transfer to the visual modality but not vice versa. This finding represents a novel illustration of auditory dominance in temporal processing and is consistent with the notion that time is primarily encoded in the auditory system.

Transfer of piano practice in fast performance of skilled finger movements.

PubMed

Furuya, Shinichi; Nakamura, Ayumi; Nagata, Noriko

2013-11-01

Transfer of learning facilitates the efficient mastery of various skills without practicing all possible sensory-motor repertoires. The present study assessed whether motor practice at a submaximal speed, which is typical in sports and music performance, results in an increase in a maximum speed of finger movements of trained and untrained skills. Piano practice of sequential finger movements at a submaximal speed over days progressively increased the maximum speed of trained movements. This increased maximum speed of finger movements was maintained two months after the practice. The learning transferred within the hand to some extent, but not across the hands. The present study confirmed facilitation of fast finger movements following a piano practice at a submaximal speed. In addition, the findings indicated the intra-manual transfer effects of piano practice on the maximum speed of skilled finger movements.

Effects of Tube Diameter and Tubeside Fin Geometry on the Heat Transfer Performance of Air-Cooled Condensers

NASA Astrophysics Data System (ADS)

Wang, H. S.; Honda, Hiroshi

A theoretical study has been made on the effects of tube diameter and tubeside fin geometry on the heat transfer performance of air-cooled condensers. Extensive numerical calculations of overall heat transfer from refrigerant R410A flowing inside a horizontal microfin tube to ambient air were conducted for a typical operating condition of the air-cooled condenser. The tubeside heat transfer coefficient was calculated by applying a modified stratified flow model developed by Wang et al.8). The numerical results show that the effects of tube diameter, fin height, fin number and helix angle of groove are significant, whereas those of the width of flat portion at the fin tip, the radius of round corner at the fin tip and the fin half tip angle are small.

Modeling habitat for Marbled Murrelets on the Siuslaw National Forest, Oregon, using lidar data

USGS Publications Warehouse

Hagar, Joan C.; Aragon, Ramiro; Haggerty, Patricia; Hollenbeck, Jeff P.

2018-03-28

Habitat models using lidar-derived variables that quantify fine-scale variation in vegetation structure can improve the accuracy of occupancy estimates for canopy-dwelling species over models that use variables derived from other remote sensing techniques. However, the ability of models developed at such a fine spatial scale to maintain accuracy at regional or larger spatial scales has not been tested. We tested the transferability of a lidar-based habitat model for the threatened Marbled Murrelet (Brachyramphus marmoratus) between two management districts within a larger regional conservation zone in coastal western Oregon. We compared the performance of the transferred model against models developed with data from the application location. The transferred model had good discrimination (AUC = 0.73) at the application location, and model performance was further improved by fitting the original model with coefficients from the application location dataset (AUC = 0.79). However, the model selection procedure indicated that neither of these transferred models were considered competitive with a model trained on local data. The new model trained on data from the application location resulted in the selection of a slightly different set of lidar metrics from the original model, but both transferred and locally trained models consistently indicated positive relationships between the probability of occupancy and lidar measures of canopy structural complexity. We conclude that while the locally trained model had superior performance for local application, the transferred model could reasonably be applied to the entire conservation zone.

Classifier transfer with data selection strategies for online support vector machine classification with class imbalance

NASA Astrophysics Data System (ADS)

Krell, Mario Michael; Wilshusen, Nils; Seeland, Anett; Kim, Su Kyoung

2017-04-01

Objective. Classifier transfers usually come with dataset shifts. To overcome dataset shifts in practical applications, we consider the limitations in computational resources in this paper for the adaptation of batch learning algorithms, like the support vector machine (SVM). Approach. We focus on data selection strategies which limit the size of the stored training data by different inclusion, exclusion, and further dataset manipulation criteria like handling class imbalance with two new approaches. We provide a comparison of the strategies with linear SVMs on several synthetic datasets with different data shifts as well as on different transfer settings with electroencephalographic (EEG) data. Main results. For the synthetic data, adding only misclassified samples performed astoundingly well. Here, balancing criteria were very important when the other criteria were not well chosen. For the transfer setups, the results show that the best strategy depends on the intensity of the drift during the transfer. Adding all and removing the oldest samples results in the best performance, whereas for smaller drifts, it can be sufficient to only add samples near the decision boundary of the SVM which reduces processing resources. Significance. For brain-computer interfaces based on EEG data, models trained on data from a calibration session, a previous recording session, or even from a recording session with another subject are used. We show, that by using the right combination of data selection criteria, it is possible to adapt the SVM classifier to overcome the performance drop from the transfer.

Evidence for Narrow Transfer after Short-Term Cognitive Training in Older Adults.

PubMed

Souders, Dustin J; Boot, Walter R; Blocker, Kenneth; Vitale, Thomas; Roque, Nelson A; Charness, Neil

2017-01-01

The degree to which "brain training" can improve general cognition, resulting in improved performance on tasks dissimilar from the trained tasks (transfer of training), is a controversial topic. Here, we tested the degree to which cognitive training, in the form of gamified training activities that have demonstrated some degree of success in the past, might result in broad transfer. Sixty older adults were randomly assigned to a gamified cognitive training intervention or to an active control condition that involved playing word and number puzzle games. Participants were provided with tablet computers and asked to engage in their assigned training for 30 45-min training sessions over the course of 1 month. Although intervention adherence was acceptable, little evidence for transfer was observed except for the performance of one task that most resembled the gamified cognitive training: There was a trend for greater improvement on a version of the corsi block tapping task for the cognitive training group relative to the control group. This task was very similar to one of the training games. Results suggest that participants were learning specific skills and strategies from game training that influenced their performance on a similar task. However, even this near-transfer effect was weak. Although the results were not positive with respect to broad transfer of training, longer duration studies with larger samples and the addition of a retention period are necessary before the benefit of this specific intervention can be ruled out.

Investigation of Control Inceptor Dynamics and Effect on Human Subject Performance

NASA Technical Reports Server (NTRS)

Stanco, Anthony A.; Cardullo, Frank M.; Houck, Jacob A.; Grube, Richard C.; Kelly, Lon C.

2013-01-01

The control inceptor used in a vehicle simulation is an important part of adequately representing the dynamics of the vehicle. The inceptor characteristics are typically based on a second order spring mass damper system with damping, force gradient, breakout force, and natural frequency parameters. Changing these parameters can have a great effect on pilot control of the vehicle. A quasi transfer of training experiment was performed employing a high fidelity and a low fidelity control inceptor. A disturbance compensatory task was employed which involved a simple horizon line disturbed in roll by a sum of sinusoids presented in an out-the-window display. Vehicle dynamics were modeled as 1/s and 1/s2. The task was to maintain level flight. Twenty subjects were divided between the high and the low fidelity training groups. Each group was trained to a performance asymptote, and then transferred to the high fidelity simulation. RMS tracking error, a PSD analysis, and a workload analysis were performed to quantify the transfer of training effect. Quantitative results of the experiments show that there is no significant difference between the high and low fidelity training groups for 1/s plant dynamics. For 1/s2 plant dynamics there is a greater difference in tracking performance and PSD; and the subjects are less correlated with the input disturbance function