Science.gov

Sample records for petroleum exploration process

  1. Geophysics in petroleum exploration

    SciTech Connect

    Not Available

    1984-01-01

    There were 40,000 professionals involved in geophysical exploration for oil and gas during 1982, and they spent nearly $3 billion, mostly on seismic surveys. This brochure explains petroleum geology in terms of earth dynamics and petroleum deposits. It explains gravity, magnetic, and seismic surveys and the use of computers to search for oil and gas. The information covers both onshore and offshore surveying, the technology involved, the processing of seismic data, and the development of maps and models. The temporary nature of petroleum exploration introduces the need for environmental protection which is site specific. The technology is available for continued exploration, but impediments to exploration on public lands and at offshore sites need to be removed for both economic and national security reasons. 3 references, 30 figures.

  2. Petroleum Processing Wastes.

    ERIC Educational Resources Information Center

    Baker, D. A.

    1978-01-01

    Presents a literature review of the petroleum processing wastes, covering publications of 1977. This review covers studies such as the use of activated carbon in petroleum and petrochemical waste treatment. A list of 15 references is also presented. (HM)

  3. Petroleum Processing Wastes.

    ERIC Educational Resources Information Center

    Baker, D. A.

    1978-01-01

    Presents a literature review of the petroleum processing wastes, covering publications of 1977. This review covers studies such as the use of activated carbon in petroleum and petrochemical waste treatment. A list of 15 references is also presented. (HM)

  4. Indonesian petroleum systems and exploration efficiency

    SciTech Connect

    Howes, J.V.C.; Tisnawijaya, S. )

    1996-01-01

    The Republic of Indonesia has over 40 productive petroleum systems and more than 100 speculative petroleum systems. Since the first oil discoveries in the 1880's, cumulative discovered ultimately recoverable petroleum resources in Indonesia have reached 50 billion barrels of oil equivalent. There are eight principal producing areas and nearly 1,000 oil and gas fields. Most of these resources have been found in the last 50 years. Successful exploration continues; at least two discoveries per year are made which exceed 50 million barrels of oil equivalent reserves. Productive petroleum system source types are split almost equally between marine and deltaic-lacustrine facies. The majority of source rocks are Tertiary in age; Mesozoic source rocks are restricted to Eastern Indonesia. Discovery process analysis indicates generally high exploration efficiency in Indonesia. An upwardly convex discovery process curve typifies many systems, reflecting both exploration efficiency and maturity; this pattern is well displayed in areas such as Central Sumatra and Salawati. A much more random or straight line process curve, as seen in West Natuna, occurs where more complex petroleum systems have inhibited exploration efficiency. An inverted, or concave upward curve, seen in some Java petroleum systems, is probably economically driven, related to development of domestic Indonesian gas markets. Several curves, such as those for the North Sumatra:Bampo-Peutu and East Kalimantan:Tanjung systems are dominated by single fields. Different exploration phases can be recognized in many systems, each phase having its own specific exploration statistics.

  5. Indonesian petroleum systems and exploration efficiency

    SciTech Connect

    Howes, J.V.C.; Tisnawijaya, S.

    1996-12-31

    The Republic of Indonesia has over 40 productive petroleum systems and more than 100 speculative petroleum systems. Since the first oil discoveries in the 1880`s, cumulative discovered ultimately recoverable petroleum resources in Indonesia have reached 50 billion barrels of oil equivalent. There are eight principal producing areas and nearly 1,000 oil and gas fields. Most of these resources have been found in the last 50 years. Successful exploration continues; at least two discoveries per year are made which exceed 50 million barrels of oil equivalent reserves. Productive/petroleum system source types are split almost equally between marine and deltaic-lacustrine facies. The majority of source rocks are Tertiary in age; Mesozoic source rocks are restricted to Eastern Indonesia. Discovery process analysis indicates generally high exploration efficiency in Indonesia. An upwardly convex discovery process curve typifies many systems, reflecting both exploration efficiency and maturity; this pattern is well displayed in areas such as Central Sumatra and Salawati. A much more random or straight line process curve, as seen in West Natuna, occurs where more complex petroleum systems have inhibited exploration efficiency. An inverted, or concave upward curve, seen in some Java petroleum systems, is probably economically driven, related to development of domestic Indonesian gas markets. Several curves, such as those for the North Sumatra:Bampo-Peutu and East Kalimantan:Tanjung systems are dominated by single fields. Different exploration phases can be recognized in many systems, each phase having its own specific exploration statistics.

  6. Two stochastic models useful in petroleum exploration

    NASA Technical Reports Server (NTRS)

    Kaufman, G. M.; Bradley, P. G.

    1972-01-01

    A model of the petroleum exploration process that tests empirically the hypothesis that at an early stage in the exploration of a basin, the process behaves like sampling without replacement is proposed along with a model of the spatial distribution of petroleum reserviors that conforms to observed facts. In developing the model of discovery, the following topics are discussed: probabilitistic proportionality, likelihood function, and maximum likelihood estimation. In addition, the spatial model is described, which is defined as a stochastic process generating values of a sequence or random variables in a way that simulates the frequency distribution of areal extent, the geographic location, and shape of oil deposits

  7. Handbook of Petroleum Processing

    NASA Astrophysics Data System (ADS)

    Jones, David S. J.; Pujado, Peter P.

    This handbook describes and discusses the features that make up the petroleum refining industry. It begins with a description of the crude oils and their nature, and continues with the saleable products from the refining processes, with a review of the environmental impact. There is a complete overview of the processes that make up the refinery with a brief history of those processes.

  8. Geology for petroleum exploration, drilling and production

    SciTech Connect

    Hyne, N.J.

    1984-01-01

    This book provides a non-technical introduction to the subject of oil. The author guides the readers in logical sequence: How oil and gas form and accumulate; how to explore for oil; and how to drill and complete a well and produce the petroleum. The contents are: The earth's crust; identification of common rocks and minerals; weathering, erosion, and unconformities; deformation; geologic time; sandstone reservoirs; limestone reservoirs; subsurface fluids; sedimentary rock patterns; surface and subsurface maps; ocean environment - plate tectonics; hydrocarbons source rocks, generation, migration and accumulation; well logs, traps; petroleum exploration; drilling a well; completing a well; and petroleum production.

  9. Practical Advances in Petroleum Processing

    NASA Astrophysics Data System (ADS)

    Hsu, Chang S.; Robinson, Paul R.

    "This comprehensive book by Robinson and Hsu will certainly become the standard text book for the oil refining business...[A] must read for all who are associated with oil refining." - Dr. Walter Fritsch, Senior Vice President Refining, OMV "This book covers a very advanced horizon of petroleum processing technology. For all refiners facing regional and global environmental concerns, and for those who seek a more sophisticated understanding of the refining of petroleum resources, this book has been long in coming." - Mr. Naomasa Kondo, Cosmo Oil Company, Ltd.

  10. Fractals in petroleum geology and earth processes

    USGS Publications Warehouse

    Barton, Christopher C.; La Pointe, Paul R.

    1995-01-01

    In this unique volume, renowned experts discuss the applications of fractals in petroleum research-offering an excellent introduction to the subject. Contributions cover a broad spectrum of applications from petroleum exploration to production. Papers also illustrate how fractal geometry can quantify the spatial heterogeneity of different aspects of geology and how this information can be used to improve exploration and production results.

  11. Underwater seismic source. [for petroleum exploration

    NASA Technical Reports Server (NTRS)

    Yang, L. C. (Inventor)

    1979-01-01

    Apparatus for generating a substantially oscillation-free seismic signal for use in underwater petroleum exploration, including a bag with walls that are flexible but substantially inelastic, and a pressured gas supply for rapidly expanding the bag to its fully expanded condition is described. The inelasticity of the bag permits the application of high pressure gas to rapidly expand it to full size, without requiring a venting mechanism to decrease the pressure as the bag approaches a predetermined size to avoid breaking of the bag.

  12. Future petroleum supply - exploration or development?

    USGS Publications Warehouse

    Klett, Timothy R.

    2005-01-01

    The presentation is titled 'Future Petroleum Supply - Exploration or Development?' and provides a general overview of the magnitude and significance of reserve growth around the world. Reserve growth is defined as the increase in successive estimates of recoverable crude oil, natural gas, and natural-gas liquids and condensates in discovered fields. Analysis of recent exploration and production data shows that petroleum (both crude oil and natural gas) volumes added to reserves by reserve growth in the world are comparable to, if not greater than, the volumes added by new-field discoveries. This presentation describes the examination of recoverable volumes of crude oil in 186 giant oil fields (excluding those of the United States (U.S.) and Canada) reported through time from 1981 to 2003 and describes a comparison of the successive increases in these volumes (reserve growth) with recoverable volumes added from new-field discoveries. Examples from the ongoing USGS study of reserve growth in the North Sea also are shown in this presentation.

  13. Petroleum exploration in the Amadeus Basin

    NASA Astrophysics Data System (ADS)

    Roe, L. E.

    Although the spectacular outcrops in the Amadeus Basin have attracted researcher for many years, commercial exploration for oil started only in 1958. Up until 1973, 16 petroleum exploration wells were drilled and the major Mereenie Oil and Gas Field and the Palm Valley Gas Field were discovered. In both cases, the principal reservoir is the latest Cambrian-Early Ordovician Pacoota Sandstone; the reservoirs were sourced from the Early Ordovician Horn Valley Siltstone. Due to a combination of adverse circumstances, there was no exploration in the basin between 1973 and 1980. Since activity resumed, 14 further exploratory wells have been drilled and both the Mereenie and Palm Valley Fields have commenced production. The Dingo Gas Field, with flows form the basal part of the latest Proterozoic Arumbera Sandstone, was discovered in 1981. The Dingo Field is currently under study because of low flow rates from the reservoir. Exploration during the 1980's has brought out new concepts regarding the prospectiveness of parts of the basin, many of which have yet to be tested.

  14. Digitally enhanced GLORIA images for petroleum exploration

    SciTech Connect

    Prindle, R.O. ); Lanz, K )

    1990-05-01

    This poster presentation graphically depicts the geological and structural information that can be derived from digitally enhanced Geological Long Range Inclined Asdic (GLORIA) sonar images. This presentation illustrates the advantages of scale enlargement as an interpreter's tool in an offshore area within the Eel River Basin, Northern California. Sonographs were produced from digital tapes originally collected for the exclusive economic zone (EEZ)-SCAN 1984 survey, which was published in the Atlas of the Western Conterminous US at a scale of 1:500,000. This scale is suitable for displaying regional offshore tectonic features but does not have the resolution required for detailed geological mapping necessary for petroleum exploration. Applications of digital enhancing techniques which utilize contrast stretching and assign false colors to wide-swath sonar imagery (approximately 40 km) with 50-m resolution enables the acquisition and interpretation of significantly more geological and structural data. This, combined with a scale enlargement to 1:100,000 and high contrast contact prints vs. the offset prints of the atlas, increases the resolution and sharpness of bathymetric features so that many more subtle features may be mapped in detail. A tectonic interpretation of these digitally enhanced GLORIA sonographs from the Eel River basin is presented, displaying anticlines, lineaments, ridge axis, pathways of sediment flow, and subtle doming. Many of these features are not present on published bathymetric maps and have not been derived from seismic data because the plan view spatial resolution is much less than that available from the GLORIA imagery.

  15. Process for producing a petroleum wax composition

    SciTech Connect

    Jones, R.L.

    1991-04-23

    This patent describes a process for producing a wax composition. It comprises: vacuum distilling a petroleum feed to prepare a 650 distillate heavy intermediate petroleum wax, having a melting point range of from about 155{degrees}F. to about 185{degrees}F., subjecting the heavy intermediate petroleum wax to furfural/duosol solvent extraction, dissolving and crystallizing the heavy intermediate petroleum wax from a methyl ethyl ketone/toluene mixed solvent, dissolving and recrystallizing the heavy intermediate petroleum wax from a methyl ethyl ketone/toluene mixed solvent, percolating the recrystallized heavy intermediate petroleum wax in the molten state through a clay bed; and blending the recrystallized heavy intermediate petroleum wax from about 50 weight percent to about 90 weight percent with from about 10 weight percent to about 30 weight percent of a polymeric compound selected from the group consisting of ethylene-vinyl acetate copolymer, ethylene-ethyl acrylate copolymer, polypropylene and mixtures there of and having a molecular weight of from about 2,000 to about 100,000 and a melt index of from about 1 to about 250{degrees} at 375{degrees}F.

  16. Unconventional methods in exploration for petroleum and natural gas III

    SciTech Connect

    Davidson, M.J.; Gottlieb, B.M.

    1984-01-01

    This book presents papers given at a conference on unconventional methods in exploration for petroleum and natural gas. Topics include the following: historical aspects of unconventional methods; the future of methane as an energy source; the use of fluorescence techniques in exploration; gravity surveys for prospecting; elctromagnetic surveys; and remote sensing in oil and gas exploration.

  17. Novel applications of light hydrocarbons chemistry in petroleum exploration

    SciTech Connect

    Mango, F.D. )

    1991-03-01

    The light hydrocarbons in petroleum are products of a kerogen-specific catalytic process. The catalysts are believed to be the transition metals entrained in kerogen. The process is controlled by the metals in the active sites and the kerogenous organic structures surrounding the active sites. Different catalytic sites are suggested to yield distinct distributions of light hydrocarbons. The author recognizes three dominant (primary) distributions, with all other distributions adequately represented by some linear combination of the three primary distributions. Three catalytic sites, therefore, can be associated with the generation of light hydrocarbons. He introduces a simple and inexpensive procedure using cross plots of various product ratios to correlate oils and source rocks. It has proven to be a remarkably articulate and powerful tool for deconvoluting diverse oils into genetic groups. The light hydrocarbons are also indicators of oil-generation temperature and other physical parameters associated with oil generation. The analysis of light hydrocarbons from this perspective is new. It provides the exploration geochemist with a novel technique for gaining insight into the fundamental chemistry of petroleum generation.

  18. Process for manufacturing a petroleum resin

    SciTech Connect

    Iwashita, T.; Nagano, M.; Tanaka, K.

    1981-08-11

    The present invention relates to a process for manufacturing a petroleum resin wherein a fraction (Component a) containing an aromatic hydrocarbon obtained by cracking of petroleum and a thermally polymerized oil (Component b) obtained by previously thermal-polymerizing the component a are mixed and then the mixture of the components a and B is subjected to polymerization by employing a Friedel-Crafts catalyst. It is also directed to propose a petroleum resin of a superior quality having a softening point optionally in a range of 30-120/sup 0/C and various bromine value in such a manner that a mixing ratio of the components a and B is properly adjusted.

  19. Structural inversion: Occurrence, mechanics, and implications for petroleum exploration

    SciTech Connect

    Lowell, J.D.

    1994-11-01

    Structural inversion, defined as the uplift of previously extended, subsiding regions by later contraction, has been recognized on every continent that has been explored for petroleum. The process can occur at the large scale of deformation in orogenic belts, but this presentation focused on inversion affecting sedimentary basins and their associated structures. The mid-continent rift and the Uinta Mountains of northeastern Utah are good examples of basin inversion. Typically, rift and sag basins can be later inverted. Mainly by reactivation of older normal faults, inversion selects rift basins where, in pure shear, weakening because of necking or thinning of lithosphere has occurred, and where, in simple shear, mechanical detachment surfaces are available for subsequent movement. Sag basins can apparently be inverted in the absence of reactivated normal faults, as in the southern altiplano of Bolivia and offshore Sabah, Borneo. Basins can be inverted by dominant strike slip with some convergent component, e.g., offshore northeast Brazil, and by almost direct compression, e.g., Atlas Mountains, Morocco. Structural inversion has important implications for petroleum exploration. Areas of inversion frequently have tighter porosity for a potential reservoir and faster seismic velocity for a particular stratigraphic interval than would be expected for their present depth of burial. Burial history curves characteristically have an upward inflection at the time of inversion, which can affect the hydrocarbon maturation process. Some source rocks may be overmature for present burial depths. In some presently shallow basins, however, maturation would not have occurred had not source rocks once been buried more deeply. Inversion can cause remigration of hydrocarbons. Finally, inversion can create the trapping structures.

  20. Process for desulfurizing petroleum feedstocks

    DOEpatents

    Gordon, John Howard; Alvare, Javier

    2014-06-10

    A process for upgrading an oil feedstock includes reacting the oil feedstock with a quantity of an alkali metal, wherein the reaction produces solid materials and liquid materials. The solid materials are separated from the liquid materials. The solid materials may be washed and heat treated by heating the materials to a temperature above 400.degree. C. The heat treating occurs in an atmosphere that has low oxygen and water content. Once heat treated, the solid materials are added to a solution comprising a polar solvent, where sulfide, hydrogen sulfide or polysulfide anions dissolve. The solution comprising polar solvent is then added to an electrolytic cell, which during operation, produces alkali metal and sulfur.

  1. Methodology for lightning protection at petroleum exploration sites

    SciTech Connect

    Torres, H.; Barreto, L.; Casas, F.; Martinez, V.

    1995-12-31

    This paper presents the methodology and results of a study that includes designs and criteria for lightning protection of sites for a petroleum exploration company in a zone of high lightning activity in Colombia (South America), a tropical country. An Integral Lightning Protection System (ILPS) concept is emphasized.

  2. Petroleum prospects, exploration activities and environmental awareness in Belize

    SciTech Connect

    Juan, E.

    1993-12-31

    The prospects for petroleum exploration and environmental awareness in Belize are discussed. It is important that Belize seek and encourage foreign investment for its ongoing projects, including all upstream activities of the petroleum sector. Any investor willing to put capital into Belize`s economic and social development has a right to expect well-defined and reliable terms and conditions. Traditionally, the Government of Belize has encouraged foreign investment and has maintained a high level of hospitality to both foregin and local investors.

  3. Process for magnetic beneficiating petroleum cracking catalyst

    DOEpatents

    Doctor, R.D.

    1993-10-05

    A process is described for beneficiating a particulate zeolite petroleum cracking catalyst having metal values in excess of 1000 ppm nickel equivalents. The particulate catalyst is passed through a magnetic field in the range of from about 2 Tesla to about 5 Tesla generated by a superconducting quadrupole open-gradient magnetic system for a time sufficient to effect separation of said catalyst into a plurality of zones having different nickel equivalent concentrations. A first zone has nickel equivalents of about 6,000 ppm and greater, a second zone has nickel equivalents in the range of from about 2000 ppm to about 6000 ppm, and a third zone has nickel equivalents of about 2000 ppm and less. The zones of catalyst are separated and the second zone material is recycled to a fluidized bed of zeolite petroleum cracking catalyst. The low nickel equivalent zone is treated while the high nickel equivalent zone is discarded. 1 figures.

  4. Process for magnetic beneficiating petroleum cracking catalyst

    DOEpatents

    Doctor, Richard D.

    1993-01-01

    A process for beneficiating a particulate zeolite petroleum cracking catalyst having metal values in excess of 1000 ppm nickel equivalents. The particulate catalyst is passed through a magnetic field in the range of from about 2 Tesla to about 5 Tesla generated by a superconducting quadrupole open-gradient magnetic system for a time sufficient to effect separation of said catalyst into a plurality of zones having different nickel equivalent concentrations. A first zone has nickel equivalents of about 6,000 ppm and greater, a second zone has nickel equivalents in the range of from about 2000 ppm to about 6000 ppm, and a third zone has nickel equivalents of about 2000 ppm and less. The zones of catalyst are separated and the second zone material is recycled to a fluidized bed of zeolite petroleum cracking catalyst. The low nickel equivalent zone is treated while the high nickel equivalent zone is discarded.

  5. Offshore petroleum exploration: capabilities and constraints. [Monograph

    SciTech Connect

    Tinney, R.

    1981-01-01

    Interviews with exploration company officials and industry and Department of Interior professionals as well as published materials were used to see how efficiently the oil and gas industries have handled outer continental shelf (OCS) leasing prior to 1981 and whether the Reagan administration's plans to accelerate the leasing program are likely to prove effective. The results of four scenarios indicate that capital, technology, equipment, and personnel constraints to offshore exploration will cripple the five-year program because the industry lacks this capability. Ignoring these constraints will misplace capital, risk human and environmental damage, and fail to meet national goals. 19 references, 7 figures, 19 tables. (DCK)

  6. Update on petroleum exploration activities in the Philippines

    SciTech Connect

    Salcedo, B.H.C.; Bausa, G.J.G.; Ocampo. I.U.

    1996-12-31

    The first significant event in Philippine Petroleum exploration dates back to 1896 with the drilling of Toledo-1 in Cebu by Smith & Bell. From the 1950`s to the 1970`s, widespread exploration activities were carried out but it was only eighty years after the first oil drilling in 1896 that oil was finally discovered in commercial quantity in Northwest Palawan. This could be attributed to the fact that serious exploration for petroleum was made with the enactment of Presidential Decree No. 87, better known as the {open_quotes}Oil Exploration and Development Act of 1972{close_quotes}, which takes into effect the current Service Contract System. Amendments to P.D. No. 87 is underway to further improve its incentive package and make it more attractive to explorationists. Petroleum exploration in the Philippines continues to be an energetic industry even if the players are not always rewarded with finds. Frontier areas have become attractive for exploration in view of the continuing research studies resulting to increased database thereat. While Northwest Palawan continues to be the hub of action, frontier areas as well as the more risky deepwater acreages still generate interests, if one wishes to be an active player in a growing energy-hungry economy.

  7. Update on petroleum exploration activities in the Philippines

    SciTech Connect

    Salcedo, B.H.C.; Bausa, G.J.G.; Ocampo. I.U.

    1996-01-01

    The first significant event in Philippine Petroleum exploration dates back to 1896 with the drilling of Toledo-1 in Cebu by Smith Bell. From the 1950's to the 1970's, widespread exploration activities were carried out but it was only eighty years after the first oil drilling in 1896 that oil was finally discovered in commercial quantity in Northwest Palawan. This could be attributed to the fact that serious exploration for petroleum was made with the enactment of Presidential Decree No. 87, better known as the [open quotes]Oil Exploration and Development Act of 1972[close quotes], which takes into effect the current Service Contract System. Amendments to P.D. No. 87 is underway to further improve its incentive package and make it more attractive to explorationists. Petroleum exploration in the Philippines continues to be an energetic industry even if the players are not always rewarded with finds. Frontier areas have become attractive for exploration in view of the continuing research studies resulting to increased database thereat. While Northwest Palawan continues to be the hub of action, frontier areas as well as the more risky deepwater acreages still generate interests, if one wishes to be an active player in a growing energy-hungry economy.

  8. Recycled fatty acid crude petroleum recovery process

    SciTech Connect

    Herter, G. L.; Herter, C.

    1984-11-06

    A method of recovering crude oil for subsequent processing. The method contemplates the step of exposing the source of crude oil such as a subterranean petroleum reservoir or a vessel or container of tar sands, kerogen or the like to aliphatic or carboxylic acid, preferably oleic acid, to produce a solvated crude oil mixture of reduced viscosity. This mixture is saponifyed by reacting it with a nucleophilic base, preferably a hydroxide of potassium or sodium, under pressure whereby to separate the solvated mixture into petroleum crude and an acid soap which migrates to an aqueous phase. The petroleum crude is separated from the aqueous soap through conventional techniques. Afterwards, a desaponification step contemplates recovery of the aliphatic or carboxylic acid for subsequent recycling in the previously mentioned exposing step. Reuse is facilitated by desaponifying aqueous soap within a high pressure containment vessel reacted with an acid suitable for donating a hydrated proton to the aqueous phase of the soap. This reconstituted acid is recycled for injection into the inputting step. Preferably carbonic acid is generated for the desaponifying step by injecting high pressure carbon dioxide within the containment vessel. By-products of the chemical reaction are separated and/or filtered as necessary to effectuate necessary purification sub-steps.

  9. Dictionary of petroleum exploration, drilling, and production

    SciTech Connect

    Hyne, N.J.

    1991-01-01

    This book contains more than 20,000 definitions of oil exploration, drilling, and production terms, making this dictionary mandatory for both the experienced industry professional and the nontechnical person. Completing this comprehensive reference are more than 500 detailed illustrations. Appendices include a rotary rig diagram, a cable tool drilling rig, a beam pumping unit, giant oil fields of the world, giant oil, and gas fields of the United States and Canada, a geological time chart, geological map symbols, conversion factors, the Greek alphabet atomic weights and numbers, charts of the geological features of the United States and Canada, plus much, much more.

  10. Aerospace technology can be applied to exploration 'back on earth'. [offshore petroleum resources

    NASA Technical Reports Server (NTRS)

    Jaffe, L. D.

    1977-01-01

    Applications of aerospace technology to petroleum exploration are described. Attention is given to seismic reflection techniques, sea-floor mapping, remote geochemical sensing, improved drilling methods and down-hole acoustic concepts, such as down-hole seismic tomography. The seismic reflection techniques include monitoring of swept-frequency explosive or solid-propellant seismic sources, as well as aerial seismic surveys. Telemetry and processing of seismic data may also be performed through use of aerospace technology. Sea-floor sonor imaging and a computer-aided system of geologic analogies for petroleum exploration are also considered.

  11. Aerospace technology can be applied to exploration 'back on earth'. [offshore petroleum resources

    NASA Technical Reports Server (NTRS)

    Jaffe, L. D.

    1977-01-01

    Applications of aerospace technology to petroleum exploration are described. Attention is given to seismic reflection techniques, sea-floor mapping, remote geochemical sensing, improved drilling methods and down-hole acoustic concepts, such as down-hole seismic tomography. The seismic reflection techniques include monitoring of swept-frequency explosive or solid-propellant seismic sources, as well as aerial seismic surveys. Telemetry and processing of seismic data may also be performed through use of aerospace technology. Sea-floor sonor imaging and a computer-aided system of geologic analogies for petroleum exploration are also considered.

  12. Unconventional methods in exploration for petroleum and natural gas IV

    SciTech Connect

    Davidson, M.J.

    1986-01-01

    This book presents the papers given at a symposium on geophysical and geochemical surveys for petroleum and natural gas deposits. Topics considered at the symposium included seismic surveys, electrical techniques in mapping hydrocarbons, hydrocarbon leakage, magnetoelectic exploration, the measurement of rock magnetic susceptibility of drill cuttings, vitrinite reflectance, remote detection, soil concentrations, carbonate prospecting, and the near-surface hydrocarbon gas measurement of vertical migration.

  13. Environmental issues of petroleum exploration and production: Introduction

    USGS Publications Warehouse

    Kharaka, Yousif K.; Dorsey, Nancy S.

    2005-01-01

    Energy is the lifeblood of our planet Earth, an essential commod- ity that powers the expanding global economy. Starting in the 1950s, oil and natural gas became the main sources of primary energy for the increasing world population, and this dominance is expected to continue for several more decades (Edwards, 1997; Energy Information Administration (EIA), 2004). In the United States, petroleum production started in 1859 when Drake's well was drilled near Titusville, Pennsylvania, and oil and natural gas currently supply approximately 63% of the energy consumption; forecasts indicate that by 2025, their use will increase by about 40% to 28.3 million bbl/day and to 31.4 tcf/yr (EIA, 2004). The clear benefits of petroleum consumption, however, can carry major environmental impacts that may be regional or global in scale, in- cluding air pollution, global climate change, and oil spills. This vol- ume of Environmental Geosciences, covering environmental impacts of petroleum exploration and production, does not address these major impacts directly because air pollution and global warming are issues related primarily to petroleum and coal uses, and major oil spills are generally attributed to marine petroleum transportation, such as the Exxon Valdez's 1989 spill of 260,000 bbl of oil into Prince William Sound, Alaska. Exploration for and production of petroleum, however, have caused local detrimental impacts to soils, surface and groundwa- ters, and ecosystems in the 36 producing states in the United States (Richter and Kreitler, 1993; Kharaka and Hanor, 2003). These im- pacts arose primarily from the improper disposal of some of the large volumes (presently estimated at 20 billion bbl/yr total pro- duced) of saline water produced with oil and gas, from accidental hydrocarbon and produced-water releases, and from abandoned oil wells that were orphaned or not correctly plugged (Kharaka et al., 1995; Veil et al., 2004). Impacts and ground-surface disturbances, in the order

  14. Operation database petroleum GIS results: Evaluation and application of geographic information systems to exploration and production

    SciTech Connect

    Fried, C.C. ); Leonard, J.E. )

    1990-05-01

    FACT: Maps are the principle graphic tool used in exploration and production. FACT: The geographic information systems (GTS) industry exceeds $250 million annually providing powerful mapping tools to a variety of disciplines. FACT: Geographic information systems are infrequently used in exploration and production which represents less than 2% of the total GIS sphere. Therefore, Operation Database Petroleum GIS, sponsored by AAPG's Geobyte and the National Computer Graphics Association, was conceived as an information exchange between the petroleum industry and GIS vendors to address this disparity. The objective of the database was to communicate petroleum industry requirements to GIS vendors and to demonstrate the potential of GIS to the petroleum industry. Requirements, in the form of data and problems, were developed by an industry group representing major and independent oil companies. The problems included base map, well, seismic, lease, transportation, topographic, three-dimensional, and remote sensing exercises. Data included scout well data, directional surveys, production histories, seismic shot-point locations and interpretive times, geologic interpretations (tops and structure and isopach maps), leases, topography, well logs, remote sensing images, gravity contours, and geographic reference information. Over 120 GIS vendors were offered a chance to participate, and nearly 20 engaged in the exercises. This talk will focus on the process, results, and conclusions of Operation Database Petroleum GIS.

  15. Petroleum in the Caribbean Basin: Further exploration justified?

    SciTech Connect

    Robinson, E.

    1996-08-01

    After more than half a century of exploration for petroleum in that part of the Caribbean Basin covered by this review, the prospects for substantial discoveries remain low. Only Barbados has had modest but sustained production of oil and gas. In Hispaniola minor production from small prospects lasted briefly. Exploration in the northeast Caribbean has not resulted in discoveries. Similar exploration in Puerto Rico and, on a more extensive scale, in Jamaica, has also failed to show positive results. On the Nicaragua Rise (Mosquitia, Tela Basins) drilling has produced shows but no production, a situation also evident in Belize. Nevertheless, examination of these results, in the context of the regional geology of the Caribbean Basin, suggests there are areas where further exploration is justified.

  16. Application of statistical quality control measures for near-surface geochemical petroleum exploration

    NASA Astrophysics Data System (ADS)

    Belt, John Q.; Rice, Gary K.

    2002-02-01

    There are four major quality control measures that can apply to geochemical petroleum exploration data: statistical quality control charts, data reproducibility-Juran approach, ethane composition index, and hydrocarbon cross plots. Statistical quality control, or SQC, charts reflect the quality-performance of the analytical process composed of equipment, instrumentation, and operator technique. An unstable process is detected through assignable causes using SQC charts. Knowing data variability is paramount to tying geochemical data over time for in-fill samples and/or project extensions. The Juran approach is a statistical tool used to help determine the ability of a process to maintain itself within the limits of set specifications for reproducing geochemical data. Ethane composition index, or ECI, is a statistical calculation based on near-surface, light hydrocarbon measurements that help differentiate thermogenic, petroleum sources at depth. The ECI data are integrated with subsurface geological information, and/or seismic survey data to determine lower-risk drilling locations. Hydrocarbon cross plots are visual correlation techniques that compare two hydrocarbons within a similar hydrocarbon suite (e.g., ethane versus propane, benzene versus toluene, or 2-ring aromatics versus 3-ring aromatics). Cross plots help determine contamination, multiple petroleum sources, and low-quality data versus high-quality data indigenous to different geochemical exploration tools. When integrated with geomorphology, subsurface geology, and seismic survey data high-quality geochemical data provides beneficial information for developing a petroleum exploration model. High-quality data is the key to the successful application of geochemistry in petroleum exploration modeling. The ability to produce high-quality, geochemical data requires the application of quality control measures reflective of a well managed ISO 9000 quality system. Statistical quality control charts, Juran

  17. Visayan Basin - the birthplace of Philippine petroleum exploration revisited

    SciTech Connect

    Rillera, F.G. ); Durkee, E.F. )

    1994-07-01

    Petroleum exploration in the Philippines has its roots in the Visayan Basin in the central Philippines. This is a Tertiary basin with up to 30,000 ft of sedimentary fill. With numerous surface oil and gas manifestations known as early as 1888, the area was the site of the first attempts to establish commercial petroleum production in the country. Over the past 100 years, more than 200 wells have been drilled in the basin. Several of these have yielded significant oil and gas shows. Production, albeit noncommercial in scale, has been demonstrated to be present in some places. A review of past exploration data reveals that many of the earlier efforts failed due to poorly located tests from both structural and stratigraphic standpoints. Poor drilling and completion technology and lack of funding compounded the problems of early explorationists. Because of this, the basin remains relatively underexplored. A recent assessment by COPLEX and E.F. Durkee and Associates demonstrates the presence of many untested prospects in the basin. These prospects may contain recoverable oil and gas potential on the order of 5 to 10 MMBO onshore and 25 to 100 MMBO offshore. With new exploration ideas, innovative development concepts, and the benefit of modern technology, commercial oil and gas production from the basin may yet be realized.

  18. Seven major needs for petroleum exploration of US northwest region

    SciTech Connect

    Warner, M.M.

    1987-08-01

    Regional geologic setting, local surface geology, and seismic refraction support the concept of the Snake River downwarp as a rift valley, separate and distinct from the Basin and Range province. The Idaho rift needs to be traced through Oregon and Washington to its probable site of origin in the Pacific basin. The original Willamette-Puget Sound early Tertiary depression is a prime target for petroleum exploration in light of recent discoveries. The outer limits of this basin need clarification. Good understanding of surface stratigraphic relationships would greatly aid subsurface structural interpretation in the region. Better dating and correlation of Cenozoic outcrops are needed. Much of the petroleum potential of the region requires unmetamorphosed Mesozoic and Paleozoic subsurface sections. To postulate this condition, a better understanding is needed of the nature of the metamorphic terrane - are they mostly of the contact type or can they expect a general regional type, at drilling depths throughout the region. Seismic reflection interpretation in this region has been difficult and not very successful. More and different geophysical experimenting is needed - refraction fan shooting might locate shallow to intermediate depth plutonic domes. The transitional zone between the miogeosynclinal facies and eugeosynclinal facies is important to the search for petroleum source materials, reservoir beds, and trap conditions. This zone needs to be defined more accurately and traced through Oregon and Idaho. Three strategically spaced, deep boreholes (20,000-25,000 ft) are needed to solve these problems and would add greatly to their understanding of the total regional setting. One well site should be within or near the Quincy basin in Washington, one near the Steens Mountain, Oregon, and one in the western Snake River downwarp of Idaho, near Lake Lowell.

  19. Estimation of the probability of success in petroleum exploration

    USGS Publications Warehouse

    Davis, J.C.

    1977-01-01

    A probabilistic model for oil exploration can be developed by assessing the conditional relationship between perceived geologic variables and the subsequent discovery of petroleum. Such a model includes two probabilistic components, the first reflecting the association between a geologic condition (structural closure, for example) and the occurrence of oil, and the second reflecting the uncertainty associated with the estimation of geologic variables in areas of limited control. Estimates of the conditional relationship between geologic variables and subsequent production can be found by analyzing the exploration history of a "training area" judged to be geologically similar to the exploration area. The geologic variables are assessed over the training area using an historical subset of the available data, whose density corresponds to the present control density in the exploration area. The success or failure of wells drilled in the training area subsequent to the time corresponding to the historical subset provides empirical estimates of the probability of success conditional upon geology. Uncertainty in perception of geological conditions may be estimated from the distribution of errors made in geologic assessment using the historical subset of control wells. These errors may be expressed as a linear function of distance from available control. Alternatively, the uncertainty may be found by calculating the semivariogram of the geologic variables used in the analysis: the two procedures will yield approximately equivalent results. The empirical probability functions may then be transferred to the exploration area and used to estimate the likelihood of success of specific exploration plays. These estimates will reflect both the conditional relationship between the geological variables used to guide exploration and the uncertainty resulting from lack of control. The technique is illustrated with case histories from the mid-Continent area of the U.S.A. ?? 1977 Plenum

  20. Petroleum exploration in Absaroka basin of northwestern Wyoming

    SciTech Connect

    Sundell, K.A.

    1986-08-01

    A new, virtually unexplored petroleum province with large potential resources can be defined in northwestern Wyoming. Structurally, the Absaroka basin is bounded on the north by the Beartooth uplift, to the west by the Gallatin and Washakie uplifts, to the south by the Washakie and Owl Creek uplifts, and to the east by the Cody arch. The Cody arch connects the southern Beartooth uplift with the northwesternmost Owl Creek uplift and separates the Bighorn basin to the east from the Absaroka basin to the west. The eastern flank of the cody arch is bounded by a major west-dipping thrust fault. The western flank is locally a subhorizontal shelf but overall gently dips to the west-southwest into deeper parts of the Absaroka basin. In contrast to most petroleum basins, the Absaroka basin is topographically a rugged mountain range, created by erosion of a thick sequence of Eocene volcanic rocks that fill the center of the basin and lap onto the adjacent uplifts. Mesozoic and Paleozoic rocks that have produced several billion barrels of oil from the adjacent Bighorn and Wind River basins are probably present within the Absaroka basin and should have similar production capabilities. The Absaroka basin may have greater potential than adjacent basins because the volcanics provide additional traps and reservoirs. Domes in Mesozoic and Paleozoic rocks beneath the volcanics and stratigraphic traps at the angular unconformity between the volcanics and underlying reservoirs are primary exploration targets. Unique geologic, geophysical, permitting, access, and drilling problems are encountered in all aspects of exploration.

  1. Petroleum production and exploration in Ouachita region of Oklahoma

    SciTech Connect

    Suneson, N.H.; Campbell, J.A.

    1989-03-01

    Petroleum production in the Ouachita region of southeastern Oklahoma occurs in three geographic areas parallel to regional structure. The frontal gas, central oil, and central gas belts are distinguished by differences in structural setting, reservoir strata, and types of hydrocarbons. In the frontal belt, nearly 1 trillion ft/sup 3/ of dry gas has been produced from thrusted and subthrust Morrowan and Atokan sandstone and carbonate reservoirs. Over 8000 bbl of oil have been produced in the central oil belt, southeast of the Ti Valley fault. Structures consist of imbricate thrusts and isoclinal to overturned folds. The fields are typically small, associated with asphaltite or tar sands, and produce from Carboniferous sandstone reservoirs. Farther southeast, small fields within the central gas belt have produced minor gas from Ordovician, Devonian, and Mississippian reservoirs. Six Ordovician through Mississippian Ouachita-facies shales are potential petroleum source rocks and occur in the middle to lower part of the oil window. However, Devonian and Mississippian strata are composed primarily of terrestrial organic matter and are probably gas prone. Oil in Carboniferous reservoirs probably migrated upward stratigraphically from older sources. Recent exploration has focused on extending production from Pennsylvanian reservoirs in the frontal gas belt. However, a significant Arbuckle discovery (ARCO 2 Yourman) and a Broken Bow uplift test (Sohio 1-22 Weyerhauser) in 1987 indicate that Cambrian-Ordovician Arbuckle Group carbonates may be prospective beneath all of the Oklahoma Ouachitas. Near-future rank-wildcat exploration will probably focus on subthrust, structurally and stratigraphically favorable Arbuckle plays.

  2. Process for recovering petroleum from a geological formation

    SciTech Connect

    Purcell, R. F.; Kayser, R. B.

    1985-06-11

    In the process for recovering petroleum having acidic components from a geological formation containing it by injecting steam in the formation, the improvement comprising conducting the steam injection in the presence of one or more water-soluble amines.

  3. Energy Bandwidth for Petroleum Refining Processes

    SciTech Connect

    none,

    2006-10-01

    The petroleum refining energy bandwidth report analyzes the most energy-intensive unit operations used in U.S. refineries: crude oil distillation, fluid catalytic cracking, catalytic hydrotreating, catalytic reforming, and alkylation. The "bandwidth" provides a snapshot of the energy losses that can potentially be recovered through best practices and technology R&D.

  4. The role of analytical chemistry in Niger Delta petroleum exploration: a review.

    PubMed

    Akinlua, Akinsehinwa

    2012-06-12

    Petroleum and organic matter from which the petroleum is derived are composed of organic compounds with some trace elements. These compounds give an insight into the origin, thermal maturity and paleoenvironmental history of petroleum, which are essential elements in petroleum exploration. The main tool to acquire the geochemical data is analytical techniques. Due to progress in the development of new analytical techniques, many hitherto petroleum exploration problems have been resolved. Analytical chemistry has played a significant role in the development of petroleum resources of Niger Delta. Various analytical techniques that have aided the success of petroleum exploration in the Niger Delta are discussed. The analytical techniques that have helped to understand the petroleum system of the basin are also described. Recent and emerging analytical methodologies including green analytical methods as applicable to petroleum exploration particularly Niger Delta petroleum province are discussed in this paper. Analytical chemistry is an invaluable tool in finding the Niger Delta oils. Copyright © 2011 Elsevier B.V. All rights reserved.

  5. Joint coking of residues from processing petroleum and shale oil

    SciTech Connect

    Georgiev, I.B.; Angelova, G.A.; Dimitrova, T.A.

    1987-03-01

    It has become necessary to investigate the feasibility and desirability of joint coking of residues from the processing of petroleum and shale oil. Experiments have been performed on different types of feedstocks: a shale oil residue (SO) with an initial boiling point of 350/sup 0/C, obtained by thermal destruction of Bulgarian shales with a solid heat-carrier; a pyrolysis tar from the production of ethylene; extracts obtained in solvent treatment of petroleum oils, namely extracts from medium-viscosity lube distillate, viscous distillate, and residual lube stock; and asphalt obtained in deasphalting. Each of the petroleum products was blended with the SO in a 1/1 ratio.

  6. Applications of aerospace technology to petroleum exploration. Volume 1: Efforts and results

    NASA Technical Reports Server (NTRS)

    Jaffe, L. D.

    1976-01-01

    The feasibility of applying aerospace techniques to help solve significant problems in petroleum exploration is studied. Through contacts with petroleum industry and petroleum service industry, important petroleum exploration problems were identified. For each problem, areas of aerospace technology that might aid in its solution were also identified where possible. Topics selected for investigation include: seismic reflection systems; down-hole acoustic techniques; identification of geological analogies; drilling methods; remote geological sensing; and sea floor imaging and mapping. Specific areas of aerospace technology are applied to 21 concepts formulated from the topics of concern.

  7. Petroleum.

    ERIC Educational Resources Information Center

    McManus, T. R.; And Others

    1989-01-01

    This review of petroleum covers: crude oil; fuels, gaseous and liquid; lubricants, oils, and greases; asphalts, bitumens, tars, and pitches; hydrocarbons; physical properties; metals in oil; nonmetallic elements and heterocompounds; and analytical methods and apparatus. (MVL)

  8. Petroleum.

    ERIC Educational Resources Information Center

    McManus, T. R.; And Others

    1989-01-01

    This review of petroleum covers: crude oil; fuels, gaseous and liquid; lubricants, oils, and greases; asphalts, bitumens, tars, and pitches; hydrocarbons; physical properties; metals in oil; nonmetallic elements and heterocompounds; and analytical methods and apparatus. (MVL)

  9. Fractals in petroleum geology and earth processes

    SciTech Connect

    Barton, C.C.; La Pointe, P.R.

    1995-12-31

    The editors of this book chose a diverse spectrum of papers written by pioneers in the field of fractals and their application to the exploration and production of hydrocarbons. The geology of the Earth`s crust is complex, chaotic, and unpredictable. Fractal geometry can quantify the spatial heterogeneity of the different geologic patterns and ultimately help improve the results of both production and exploration. To this goal the book has accomplished such an objective with diverse, well-chosen contributions from a variety of experts in the field. The book starts with a chapter introducing the basics, with a short historical foot-note by Benoit Mandelbrot, who is considered the {open_quotes}father of fractals.{close_quotes} Mandelbrot emphasized that geologic processes not only exhibit fractal properties but also are strongly connected to the economic system. This paved the way for the next three chapters that deal with the size and spatial distribution of hydrocarbon reserves and their importance in economic evaluations. The following four chapters deal with the fractal processes as related to sedimentologic, stratigraphic, and geomorphologic systems. Chapter five is an interesting one that deals with stratigraphic models and how their fractal processes can be tied with the inter-well correlation and reconstruct depositional environments. The next three chapters are concerned with porous and fractured rocks and how they affect the flow of fluids. The last two chapters (chapters 13 and 14) are of particular interest. Chapter 13 deals with the vertical vs. horizontal well-log variability and application to fractal reservoir modeling. Chapter 14 illustrates how fractal geometry brings mathematical order to geological and geophysical disorder. This is evident when dealing with geophysical modeling and inversion.

  10. The influence of petroleum products on the methane fermentation process.

    PubMed

    Choromański, Paweł; Karwowska, Ewa; Łebkowska, Maria

    2016-01-15

    In this study the influence of the petroleum products: diesel fuel and spent engine oil on the sewage sludge digestion process and biogas production efficiency was investigated. Microbiological, chemical and enzymatic analyses were applied in the survey. It was revealed that the influence of the petroleum derivatives on the effectiveness of the methane fermentation of sewage sludge depends on the type of the petroleum product. Diesel fuel did not limit the biogas production and the methane concentration in the biogas, while spent engine oil significantly reduced the process efficacy. The changes in physical-chemical parameters, excluding COD, did not reflect the effect of the tested substances. The negative influence of petroleum products on individual bacterial groups was observed after 7 days of the process, while after 14 days probably some adaptive mechanisms appeared. The dehydrogenase activity assessment was the most relevant parameter to evaluate the effect of petroleum products contamination. Diesel fuel was probably used as a source of carbon and energy in the process, while the toxic influence was observed in case of spent engine oil.

  11. Co-processing of carbonaceous solids and petroleum oil

    DOEpatents

    Gupta, Avinash; Greene, Marvin I.

    1992-01-01

    In a process for producing distillates from coal by a first stage thermal liquefaction followed by a catalytic hydrogenation, liquefaction solvent is added at points spaced over the length of the thermal liquefaction heater. Coal may be co-processed with petroleum oil by adding pre-hydrogenated oil to the first stage or unhydrogenated oil to the second stage.

  12. Future of petroleum exploration in the United States

    SciTech Connect

    Haun, J.D.

    1981-10-01

    The decline of United States oil and natural gas reserves could be moderated by increasing exploratory drilling. During each of the past three years, 1978 to 1980, the United States produced approximately 3.0 billion barrels of crude oil, 0.7 billion barrels of natural gas liquids, and 20 trillion cubic feet of natural gas, for a total of more than 7 million barrels of oil equivalent. In contrast, discoveries have been more than 2 billion barrels of oil equivalent. Annual estimates of ultimate recovery (past production plus reserves) are calculated for each year since 1920 by the American Petroleum Institute and the American Gas Association. From the derived quantities of oil and natural gas discovered each year and from the estimates of the footage drilled annually in new field wildcat wells, the oil and natural gas discovered per foot are estimated. In the late 1940's, the average discovery per foot was more than 350 barrels of oil equivalent. By the late 1970's, the average discovery per foot had dropped to approximately 50 barrels of oil equivalent. The projected increases in drilling and completion costs from 1979 to 1990, in inflated dollars indicate a total cost of $179 billion. Lease, geological and geophysical, development well, and overhead costs are not included. A projected increasing role of natural gas and natural gas liquids in the total energy mix is due to the relatively large proportion of natural gas, on a Btu-equivalent basis, being discovered per foot of new field wildcat drilled. The projected costs are so large that attaining these limited goals, 2 billion barrels of oil equivalent per year, does not seem possible. The total cost of the necessary new field wildcats, $179 billion, is of the same order of magnitude as the estimated federal income from the windfall profits tax for 1980 to 1990. Total exploration costs, however, would be more than one trillion dollars, $50 per barrel of oil equivalent discovered. 14 figures, 2 tables.

  13. Thermal acidization and recovery process for recovering viscous petroleum

    DOEpatents

    Poston, Robert S.

    1984-01-01

    A thermal acidization and recovery process for increasing production of heavy viscous petroleum crude oil and synthetic fuels from subterranean hydrocarbon formations containing clay particles creating adverse permeability effects is described. The method comprises injecting a thermal vapor stream through a well bore penetrating such formations to clean the formation face of hydrocarbonaceous materials which restrict the flow of fluids into the petroleum-bearing formation. Vaporized hydrogen chloride is then injected simultaneously to react with calcium and magnesium salts in the formation surrounding the bore hole to form water soluble chloride salts. Vaporized hydrogen fluoride is then injected simultaneously with its thermal vapor to dissolve water-sensitive clay particles thus increasing permeability. Thereafter, the thermal vapors are injected until the formation is sufficiently heated to permit increased recovery rates of the petroleum.

  14. Petroleum geology of Cook Inlet basin - an exploration model

    USGS Publications Warehouse

    Magoon, L.B.; Claypool, G.E.

    1981-01-01

    Oil exploration commenced onshore adjacent to lower Cook Inlet on the Iniskin Peninsula in 1900, shifted with considerable success to upper Cook Inlet from 1957 through 1965, then returned to lower Cook Inlet in 1977 with the COST well and Federal OCS sale. Lower Cook Inlet COST No. 1 well, drilled to a total depth of 3,775.6 m, penetrated basinwide unconformities at the tops of Upper Cretaceous, Lower Cretaceous, and Upper Jurassic strata at 797.1, 1,540.8, and 2,112.3 m, respectively. Sandstone of potential reservoir quality is present in the Cretaceous and lower Tertiary rocks. All siltstones and shales analyzed are low (0 to 0.5 wt. %) in oil-prone organic matter, and only coals are high in humic organic matter. At total depth, vitrinite readings reached a maximum ave age reflectance of 0.65. Several indications of hydrocarbons were present. Oil analyses suggest that oils from the major fields of the Cook Inlet region, most of which produce from the Tertiary Hemlock Conglomerate, have a common source. More detailed work on stable carbon isotope ratios and the distribution of gasoline-range and heavy (C12+) hydrocarbons confirms this genetic relation among the major fields. In addition, oils from Jurassic rocks under the Iniskin Peninsula and from the Hemlock Conglomerate at the southwestern tip of the Kenai lowland are members of the same or a very similar oil family. The Middle Jurassic strata of the Iniskin Peninsula are moderately rich in organic carbon (0.5 to 1.5 wt. %) and yield shows of oil and of gas in wells and in surface seeps. Extractable hydrocarbons from this strata are similar in chemi al and isotopic composition to the Cook Inlet oils. Organic matter in Cretaceous and Tertiary rocks is thermally immature in all wells analyzed. Oil reservoirs in the major producing fields are of Tertiary age and unconformably overlie Jurassic rocks; the pre-Tertiary unconformity may be significant in exploration for new oil reserves. The unconformable relation

  15. Process for stimulating petroleum production wells

    SciTech Connect

    Dor, I.

    1986-06-17

    A process is described for controlling algal growth in the wind-mixed layer of a salt water solar pond having a halocline located below the wind-mixed layer and a heat storage layer located below the halocline, wherein the halocline has a downwardly directed salt gradient and a temperature profile that follows the salinity profile, comprising rapidly changing the salinity in the wind-mixed layer for rapidly changing the osmotic pressure on algae in the wind-mixed layer which are sensitive to rapid changes in ambient salinity by an amount effective to cause such algae therein to sink into a region of increased temperature.

  16. Workbook for prioritizing petroleum industry exploration and production sites for remediation

    SciTech Connect

    White, G.J.

    1998-08-03

    The purpose of this Workbook is to provide a screening-level method for prioritizing petroleum exploration and production sites for remediation that is based on readily available information, but which does not require a full characterization of the sites being evaluated. The process draws heavily from the Canadian National Classification System for Contaminated Sites, and fits into the framework for ecological risk assessment provided in guidance from the US Environmental Protection Agency. Using this approach, scoring guidelines are provided for a number of Evaluation Factors relating to: (1) the contaminants present at the site; (2) the potential exposure pathways for these contaminants; and (3) the potential receptors of those contaminants. The process therefore incorporates a risk-based corrective action (RBCA) framework to estimate the relative threat posed by a site to human health and to ecological systems. Physical (non-toxic) disturbance factors have also been incorporated into the process. It should also be noted that the process described in this Workbook has not yet been field tested at petroleum E and P sites. The first logical step in the field testing of this process is to apply the method at a small number of sites to assess the availability of the information that is needed to score each evaluation factor. Following this evaluation, the Workbook process should be applied at a series of sites to determine the effectiveness of the process at ranking sites according to their relative need for remediation. Upon completion of these tests, the Workbook should be revised to reflect the findings of the field tests.

  17. Petroleum-resource appraisal and discovery rate forecasting in partially explored regions

    USGS Publications Warehouse

    Drew, Lawrence J.; Schuenemeyer, J.H.; Root, David H.; Attanasi, E.D.

    1980-01-01

    PART A: A model of the discovery process can be used to predict the size distribution of future petroleum discoveries in partially explored basins. The parameters of the model are estimated directly from the historical drilling record, rather than being determined by assumptions or analogies. The model is based on the concept of the area of influence of a drill hole, which states that the area of a basin exhausted by a drill hole varies with the size and shape of targets in the basin and with the density of previously drilled wells. It also uses the concept of discovery efficiency, which measures the rate of discovery within several classes of deposit size. The model was tested using 25 years of historical exploration data (1949-74) from the Denver basin. From the trend in the discovery rate (the number of discoveries per unit area exhausted), the discovery efficiencies in each class of deposit size were estimated. Using pre-1956 discovery and drilling data, the model accurately predicted the size distribution of discoveries for the 1956-74 period. PART B: A stochastic model of the discovery process has been developed to predict, using past drilling and discovery data, the distribution of future petroleum deposits in partially explored basins, and the basic mathematical properties of the model have been established. The model has two exogenous parameters, the efficiency of exploration and the effective basin size. The first parameter is the ratio of the probability that an actual exploratory well will make a discovery to the probability that a randomly sited well will make a discovery. The second parameter, the effective basin size, is the area of that part of the basin in which drillers are willing to site wells. Methods for estimating these parameters from locations of past wells and from the sizes and locations of past discoveries were derived, and the properties of estimators of the parameters were studied by simulation. PART C: This study examines the temporal

  18. Computational methods for a three-dimensional model of the petroleum-discovery process

    USGS Publications Warehouse

    Schuenemeyer, J.H.; Bawiec, W.J.; Drew, L.J.

    1980-01-01

    A discovery-process model devised by Drew, Schuenemeyer, and Root can be used to predict the amount of petroleum to be discovered in a basin from some future level of exploratory effort: the predictions are based on historical drilling and discovery data. Because marginal costs of discovery and production are a function of field size, the model can be used to make estimates of future discoveries within deposit size classes. The modeling approach is a geometric one in which the area searched is a function of the size and shape of the targets being sought. A high correlation is assumed between the surface-projection area of the fields and the volume of petroleum. To predict how much oil remains to be found, the area searched must be computed, and the basin size and discovery efficiency must be estimated. The basin is assumed to be explored randomly rather than by pattern drilling. The model may be used to compute independent estimates of future oil at different depth intervals for a play involving multiple producing horizons. We have written FORTRAN computer programs that are used with Drew, Schuenemeyer, and Root's model to merge the discovery and drilling information and perform the necessary computations to estimate undiscovered petroleum. These program may be modified easily for the estimation of remaining quantities of commodities other than petroleum. ?? 1980.

  19. Applications of aerospace technology to petroleum exploration. Volume 2: Appendices

    NASA Technical Reports Server (NTRS)

    Jaffe, L. D.

    1976-01-01

    Participants in the investigation of problem areas in oil exploration are listed and the data acquisition methods used to determine categories to be studied are described. Specific aerospace techniques applicable to the tasks identified are explained and their costs evaluated.

  20. Past operations, results, and prospects of future petroleum explorations in the SE Pannonian basin

    SciTech Connect

    Sarkovic, M.; Stankovic, S. )

    1991-08-01

    The long history of petroleum operations in the southeastern area of the Pannonian basin (eastern Yugoslavia) relates to successful explorations using state-of-art tools in geology, geophysics, and geochemistry, as well as in deep drilling. The paper will discuss chronologically past explorations and problems encountered in its specific stages. A comprehensive petroleum geological overview will highlight the most important features of the 30,000-km{sup 2} exploration area, including issues such as oil and gas origin, occurrence of source, reservoir, and cap rocks, hydrocarbon migration and accumulation etc. Particular attention will be devoted to the description of the applied exploration techniques and results obtained on this very interesting hydrocarbon-bearing area. Due space will be given to the application of the recent developments for assessing the potential of the deep buried, comparatively unknown targets situated in extremely complex environments under adverse temperature and pressure conditions.

  1. Method for stabilizing an acrylamide polymer in a petroleum recovery process

    SciTech Connect

    Kanda, S.; Kawamura, G.

    1983-07-12

    A method for stabilizing an acrylamide polymer in a petroleum recovery process is described. As a result of investigations into methods for stabilizing acrylamide polymers and additives for stabilizing these polymers in a petroleum recovery process, it has been found that aqueous solutions of these polymers can be stabilized for use in a petroleum recovery process by the addition of 2-mercaptobenzoimidazole or its water soluble salt. 1 claim.

  2. History of petroleum exploration in California and the West Coast

    SciTech Connect

    Kilkenny, J.E.

    1991-03-01

    California's main oil and gas basins consist of the inland Sacramento and San Joaquin and the Los Angeles, Ventura, and Santa Maria basins adjacent to the coast and extending offshore. The state's total oil production to 1991 is approximately 22.8 billion bbls. Producing formations range in age from basement Jurassic to Pleistocene, but production is mainly from thick multiple sand zones of Miocene and Pliocene age. The first oil discovery was in the eastern Ventura basin in 1875. By the turn of the century, 22 fields, including several giants in the San Joaquin Valley, had been discovered by drilling near oil seepages. The most important event of the 1920s was the discovery of several giant oil fields in the Los Angeles basin, drilled on topographic highs suggestive of underlying anticlines. State production rapidly increased to 850,000 BOPD, or 40% of all US production. The 1930s saw the advent of the reflection seismograph, responsible for the state's largest oil field (Wilmington) in the Lost Angeles basin and the state's largest gas field (Rio Vista) in the Sacramento basin. A number of important fields were found under the San Joaquin Valley floor. Geological thinking in the late 1930s and 1940s resulted in the discovery of large stratigraphic traps in the San Joaquin Valley (e.g., East Coalinga) and at Santa Maria from fractured shale, plus two new small producing basins, the Cuyama and the Salinas. Offshore exploration, consisting of seismic work, ocean-bottom sampling, and coreholing, revealed the presence of a number of anticlines in the Ventura basin, paralleling the Santa Barbara coast. The first offshore discovery was made in 1959 on state lands followed by several major fields on federal lands in the late 1960s. Elsewhere along the West Coast, exploration in Oregon and Washington has yielded only minor gas.

  3. Petroleum geology and exploration of Tarim Basin, China

    SciTech Connect

    Liang Di-Gang; Jia Cheng-Zao )

    1996-01-01

    Since 1989 CNPC has carried on large-scale oil and gas exploration and geological research in Tarim Basin of Xinjiang Province, China. Twelve thousand km 2D seismic, 4500 km[sup 2] 3D seismic, and 200 exploratory wells have been completed; ninety-five wells yield commercial oil or gas flows. At this time, eight oil/gas fields have been discovered; they include Lunnan, Yaha, and Tazhong No. 4, having proved 2.7x10[sup 8]t of oil and 109.2x10[sup 9]m[sup 3] of gas in place. Two million six hundred thousand tons of crude oil was yielded in 1995 and 5x10[sup 8]t crude oil will be produced in 1997. The facies of discovered oil-gas pools in Tarim Basin are complex: there are condensate gas pools, volatile oil pools, normal oil pools, and some heavy oil pools. Structural traps form 80% of oil-gas pools. Oil-gases are mainly reservoired in sandstone beds. The burial depths of oil-gas pools range mainly from 4000 to 5500m. Oil and condensate gas occupy 60% and 40% of proved reserves respectively. Oil-gas pools are mainly distributed in the Mesozoic-Cenozoic group, in which Tertiary occupies 50%, Triassic occupies 30% and Carboniferous occupies 20%. Tarim Basin is a large overlapped composite basin, composed of Paleozoic cratonic basins and Mesozoic-Cenozoic foreland basins. Paleozoic and Mesozoic-Cenozoic oil-gas pools have different distribution character. Paleozoic oil-gas accumulations are controlled by cratonic paleo-uplifts and slopes. Mesozoic-Cenozoic oil-gas accumulations are controlled by foredeep uplifts and imbricate thrust structures of foreland thrust belts.

  4. Petroleum geology and exploration of Tarim Basin, China

    SciTech Connect

    Liang Di-Gang; Jia Cheng-Zao

    1996-12-31

    Since 1989 CNPC has carried on large-scale oil and gas exploration and geological research in Tarim Basin of Xinjiang Province, China. Twelve thousand km 2D seismic, 4500 km{sup 2} 3D seismic, and 200 exploratory wells have been completed; ninety-five wells yield commercial oil or gas flows. At this time, eight oil/gas fields have been discovered; they include Lunnan, Yaha, and Tazhong No. 4, having proved 2.7x10{sup 8}t of oil and 109.2x10{sup 9}m{sup 3} of gas in place. Two million six hundred thousand tons of crude oil was yielded in 1995 and 5x10{sup 8}t crude oil will be produced in 1997. The facies of discovered oil-gas pools in Tarim Basin are complex: there are condensate gas pools, volatile oil pools, normal oil pools, and some heavy oil pools. Structural traps form 80% of oil-gas pools. Oil-gases are mainly reservoired in sandstone beds. The burial depths of oil-gas pools range mainly from 4000 to 5500m. Oil and condensate gas occupy 60% and 40% of proved reserves respectively. Oil-gas pools are mainly distributed in the Mesozoic-Cenozoic group, in which Tertiary occupies 50%, Triassic occupies 30% and Carboniferous occupies 20%. Tarim Basin is a large overlapped composite basin, composed of Paleozoic cratonic basins and Mesozoic-Cenozoic foreland basins. Paleozoic and Mesozoic-Cenozoic oil-gas pools have different distribution character. Paleozoic oil-gas accumulations are controlled by cratonic paleo-uplifts and slopes. Mesozoic-Cenozoic oil-gas accumulations are controlled by foredeep uplifts and imbricate thrust structures of foreland thrust belts.

  5. Exploration for fractured petroleum reservoirs using radar/Landsat merge combinations

    NASA Technical Reports Server (NTRS)

    Macdonald, H.; Waite, W.; Borengasser, M.; Tolman, D.; Elachi, C.

    1981-01-01

    Since fractures are commonly propagated upward and reflected at the earth's surface as subtle linears, detection of these surface features is extremely important in many phases of petroleum exploration and development. To document the usefulness of microwave analysis for petroleum exploration, the Arkansas part of the Arkoma basin is selected as a prime test site. The research plan involves comparing the aircraft microwave imagery and Landsat imagery in an area where significant subsurface borehole geophysical data are available. In the northern Arkoma basin, a positive correlation between the number of linears in a given area and production from cherty carbonate strata is found. In the southern part of the basin, little relationship is discernible between surface structure and gas production, and no correlation is found between gas productivity and linear proximity or linear density as determined from remote sensor data.

  6. Wildlife management implications of petroleum exploration and development in wildland environments. Forest Service general technical report

    SciTech Connect

    Bromley, M.

    1985-09-01

    The report describes: (1) petroleum exploration, development, and production; (2) potential environmental disruptions; (3) effects of disruptions on wildlife behavior, habitat, and populations; and (4) strategies for minimizing and mitigating adverse effects. The section on impacts includes a detailed outline/index referring to an annotated bibliography. Major wildlife groups discussed are ungulates, carnivores, waterfowl, raptors, songbirds, shorebirds, and furbearers. Fish and other aquatic organisms are not covered.

  7. Using potential field data for petroleum exploration targeting, Amadeus Basin, Australia

    NASA Astrophysics Data System (ADS)

    Dentith, Mike; Cowan, Duncan

    2011-09-01

    The Amadeus Basin, a large Proterozoic basin located in central Australia, is one of the least explored onshore petroleum-bearing basins with proven reserves in Australia. The size and remoteness of the Amadeus Basin makes ground exploration expensive so this study uses aerogravity and aeromagnetic data to assess petroleum prospectivity. In the western part of the Amadeus Basin the Gillen Petroleum System is considered most significant; this system has the important characteristic that the source in the Bitter Springs Formation is stratigraphically higher than the potential reservoirs within the Dean/Heavitree Quartzite. Thin skinned deformation is expected at the source level and above, with detachments at evaporitic horizons, but deformation of the reservoir is expected to be thick-skinned. This model can form the basis for predicting potential field responses. The most prospective areas are where: (i) gravity suggests basement (and reservoir) is shallow; (ii) magnetics maps fold-thrust complexes (structural trap); and (iii) these features occur adjacent to gravity lows, indicative of significant thicknesses of basin fill (source at depth and below reservoir). Faults at the margins of the depocentre (mapped using magnetic data) provide a possible migration path for the hydrocarbons. Favourable scenarios for younger petroleum systems are antiforms in fold-thrust complexes in units assigned to the Boord Formation and younger units. The juxtaposition of these structures with depocentres suggested by negative gravity anomalies constitutes a favourable exploration scenario. Regardless of specific exploration targets, this study demonstrates that airborne gravity and magnetic data are capable of resolving intra-basin structures in sufficient detail to allow prospective areas to be identified and for follow-up seismic surveys to be reliably planned.

  8. Petroleum exploration plays of the onshore Douala/Kribi Campo of Cameroon, West Africa

    SciTech Connect

    Seme Abomo, R.

    1996-08-01

    Generally, rifting and drifting phases characterize the Douala/Kribi Campo Formation. The rifting phase resulted from a progressive northward plate tectonic evolution, which extended from Late Jurassic to Neocomian-Turonian time, involving both an extensional process and strike-slip movements along fracture zones. The drifting phase was established during the Albian period, with the first marine incursion in the basin. During this phase, sedimentation was controlled by such factors as sea level variations, drainage systems and climate. Consequently, the onshore sector of the Douala/Kribi-Campo Basin can be subdivided into two major areas with different petroleum exploration plays. The southern area in which the rifting phase has thick Albo-Aptian sediments of terrigenous and clastics nature. These were deposited in coalescing fan deltas, locations of which were controlled by collapsed and tilted blocks. Trangressive deposits of the drifting phase overlie the erosional surface. In the northern area, the rifting phase consists of a system of horsts and grabens of Aptian time. The drifting phase consists of shelf sandstones and Upper Cretaceous turbiditic deposits.

  9. Statistics of Petroleum Exploration in the World Outside the United States and Canada Through 2001

    USGS Publications Warehouse

    Attanasi, E.D.; Freeman, P.A.; Glovier, Jennifer A.

    2007-01-01

    Future oil and gas supplies depend, in part, on the reserves that are expected to be added through exploration and new discoveries. This Circular presents a summary of the statistics and an analysis of petroleum exploration in the world outside the United States and Canada (the study area) through 2001. It updates U.S. Geological Survey Circular 1096 (by E.D. Attanasi and D.H. Root, 1993) and expands coverage of the statistics to areas where drilling and discovery data have recently become available. These new areas include China, the formerly Communist countries of Eastern Europe, and the countries that once were part of the former Soviet Union in Europe and Asia. Data are presented by country but are organized by petroleum provinces delineated by the U.S. Geological Survey World Energy Assessment Team (USGS Digital Data Series DDS?60, published in 2000). The data and analysis are presented in maps and graphs, providing a visual summary of the exploration maturity of an area. The maps show the delineated prospective areas and explored areas through 2001; explored areas have a drilling density that would rule out the occurrence of undetected large petroleum accumulations. Graphs summarize the exploration yields in terms of cumulative recoverable discovered oil and gas by delineated prospective area. From 1992 through 2001 in areas outside the United States and Canada, the delineated prospective area expanded at a rate of about 50,000 square miles per year while the explored area grew at the rate of about 11,000 square miles per year. The delineated prospective area established by 1970 contains about 75 percent of the oil discovered to date in the study area. This area is slightly less than 40 percent of the delineated prospective area established through 2001. Maps and graphs show the extension of the delineated prospective area to deepwater areas offshore of Brazil and West Africa. From 1991 through 2000, offshore discoveries accounted for 59 percent of the oil

  10. Purification and detoxification of petroleum refinery wastewater by electrocoagulation process.

    PubMed

    Gousmi, N; Sahmi, A; Li, H Z; Poncin, S; Djebbar, R; Bensadok, K

    2016-09-01

    The treatment of synthetic oily wastewater having the characteristics of a typical petroleum refinery wastewater (PRW) by electrocoagulation (EC) using iron and aluminum electrodes was conducted in an electrolytic reactor equipped with fluid recirculation. During the treatment, the emulsion stability was followed by the measurement of Zeta potential and particle sizes. Effects of some operating conditions such as electrodes material, current density and electrolysis time on removal efficiencies of turbidity, and chemical oxygen demand (COD) were investigated in detail. The PRW purification by the EC process was found to be the most effective using aluminum as the anode and cathode, current density of 60 A/m(2) and 30 min of electrolysis time. Under these conditions, the process efficiencies were 83.52% and 99.94%, respectively, for COD and turbidity removals which correspond to final values of 96 mg O2/L and 0.5 NTU. A moderate energy consumption (0.341 kWh) was needed to treat 1 m(3) of PRW. Besides, the ecotoxicity test proved that toxic substances presented in the PRW, and those inhibiting the germination growth of whet, were eliminated by the EC technique.

  11. Petroleum: An energy profile, 1999

    SciTech Connect

    1999-07-01

    This report prepared by the Energy Information Administration covers the following topics: petroleum production and end-use sectors; resources and reserves; exploration and production; LPG sources and processing; motor gasoline octane enhancement; constructing pipelines; the strategic petroleum reserve; imports and exports; marketing; district descriptions and maps; and refinery processes and facilities. 33 figs., 7 tabs.

  12. Application of Landsat imagery to problems of petroleum exploration in Qaidam Basin, China

    USGS Publications Warehouse

    Bailey, G.B.; Anderson, P.D.

    1982-01-01

    Tertiary and Quaternary nonmarine, petroleum-bearing sedimentary rocks have been extensively deformed by compressive forces. These forces created many folds which are current targets of Chinese exploration programs. Image-derived interpretations of folds, strike-slip faults, thrust faults, normal or reverse faults, and fractures compared very favorably, in terms of locations and numbers mapped, with Chinese data compiled from years of extensive field mapping. Many potential hydrocarbon trapping structures were precisely located. Orientations of major structural trends defined from Landsat imagery correlate well with those predicted for the area based on global tectonic theory. These correlations suggest that similar orientations exist in the eastern half of the basin where folded rocks are mostly obscured by unconsolidated surface sediments and where limited exploration has occurred.--Modified journal abstract.

  13. West Africa prepares for busy season. [Petroleum exploration in West Africa

    SciTech Connect

    Not Available

    1982-06-20

    Although there has been a decrease in oil prices, activity along coastal West Africa has tended to increase, with emphasis on field development and production. Because of a world-wide surplus of petroleum, Nigeria has had to cut production by more than half and offshore operations have been affected also. Off the coast of Gabon exploration activity has increased with numerous wildcat rigs which are potentially highly productive. Overall production in Gabon has decreased slightly since 1980. The People's Republic of the Congo, on the other hand, has increased productivity due to new successful fields, while in the Angola/Cabinda area new offshore programs are forming. Production and exploration increases are also expected for Ghana, Zaire, Cameroon, and South Africa. (JBF)

  14. Secondary co-processing of coal and petroleum naphthas

    SciTech Connect

    Moore, S.A.; Jones, M.A.; Lohring, R.

    1993-12-31

    Straight-run distillate derived from North Sea (Brent) crude oil and coal-derived distillate obtained from the 200 tpd coal liquefaction pilot plant at Bottrop, Essen (Germany) have been used to prepare light distillate refining feedstocks. Coal-derived naphtha was hydrotreated along and as a 50% blend with petroleum naphtha to reduce its nitrogen and sulphur content to levels acceptable for catalytic reformer feedstocks. The hydrotreating conditions required were similar to those used in the conventional oil refining industry. The hydrotreated coal-derived naphthas were catalytically reformed alone and as blends with petroleum naphtha. The coal-derived naphthas reformed very readily to high octane blendstocks at conditions markedly less severe than those necessary for the petroleum naphtha. As would be expected, the conditions required to reform blends were intermediate between those of the end members. However, the results indicate potential yield advantages when co-reforming blends as compared with reforming the end members separately and blending the products.

  15. The use of radar and LANDSAT data for mineral and petroleum exploration in the Los Andes region, Venezuela

    NASA Technical Reports Server (NTRS)

    Vincent, R. K.

    1980-01-01

    A geological study of a 27,500 sq km area in the Los Andes region of northwestern Venezuela was performed which employed both X-band radar mosaics and computer processed Landsat images. The 3.12 cm wavelength radar data were collected with horizontal-horizontal polarization and 10 meter spatial resolution by an Aeroservices SAR system at an altitude of 12,000 meters. The radar images increased the number of observable suspected fractures by 27 percent over what could be mapped by LANDSAT alone, owing mostly to the cloud cover penetration capabilities of radar. The approximate eight fold greater spatial resolution of the radar images made possible the identification of shorter, narrower fractures than could be detected with LANDSAT data alone, resulting in the discovery of a low relief anticline that could not be observed in LANDSAT data. Exploration targets for petroleum, copper, and uranium were identified for further geophysical work.

  16. Abundance and diversity of soil petroleum hydrocarbon-degrading microbial communities in oil exploring areas.

    PubMed

    Yang, Yuyin; Wang, Jie; Liao, Jingqiu; Xie, Shuguang; Huang, Yi

    2015-02-01

    Alkanes and polycyclic aromatic hydrocarbons (PAHs) are the commonly detected petroleum hydrocarbon contaminants in soils in oil exploring areas. Hydrocarbon-degrading genes are useful biomarks for estimation of the bioremediation potential of contaminated sites. However, the links between environmental factors and the distribution of alkane and PAH metabolic genes still remain largely unclear. The present study investigated the abundances and diversities of soil n-alkane and PAH-degrading bacterial communities targeting both alkB and nah genes in two oil exploring areas at different geographic regions. A large variation in the abundances and diversities of alkB and nah genes occurred in the studied soil samples. Various environmental variables regulated the spatial distribution of soil alkane and PAH metabolic genes, dependent on geographic location. The soil alkane-degrading bacterial communities in oil exploring areas mainly consisted of Pedobacter, Mycobacterium, and unknown alkB-harboring microorganisms. Moreover, the novel PAH-degraders predominated in nah gene clone libraries from soils of the two oil exploring areas. This work could provide some new insights towards the distribution of hydrocarbon-degrading microorganisms and their biodegradation potential in soil ecosystems.

  17. Primary brain tumor mortality at a petroleum exploration and extraction research facility.

    PubMed

    Buffler, Patricia A; Kelsh, Michael; Chapman, Pamela; Wood, Susan; Lau, Edmund; Golembesky, Amanda; Wood, Ralph; Kalmes, Renee; Brorby, Greg

    2004-03-01

    A cohort mortality study was conducted among 3,779 employees at a petroleum exploration and extraction research facility to evaluate workplace exposures and brain tumor risk. Deaths were identified by searches against the National Death Index, Social Security Administration, and California state mortality files. Work histories were classified by job titles, laboratory activity, and company division. Eleven brain tumor deaths were observed among the cohort (standardized mortality ratio [SMR] 1.8; 95% confidence interval = 0.9-3.2). SMR analyses for scientists, employment in laboratory work, and in the research division were not associated with an increased brain tumor SMR, whereas an increased SMR was observed for administrative and nonresearch employees. Although conclusions are limited by the small study population and lack of specific exposure data, these findings were not consistent with an occupational explanation for the observed brain tumor cluster.

  18. [Elementary investigation on the application of laser Raman microprobe in petroleum exploration].

    PubMed

    He, Mou-chun; Lü, Xin-biao; Liu, Yan-rong

    2004-11-01

    Laser Raman Microprobe (LRM) is a micro-analytical technique for determining molecular components. Based on the summarization of the applications of LRM in petroleum exploration, the authors analyzed fluid inclusions (FI) and organic matters, and found that this technique could not only research qualitatively different phase components of single fluid inclusions and the types of organic substances, but also determine quantitatively each phase component of single fluid inclusions and the indexes of maturation of vitrinite. It is concluded that it is feasible to calculate the salinity of single FI by to sigmaB % NaCl = 61.183S - 22.173 and the reflectance (R0) of vitrinite by R0 (%) = 0.69 ln(82.12 D - 16,054.49) - 4.88.

  19. The design and use of a field and reservoir data base for petroleum exploration

    SciTech Connect

    Nehring, R. )

    1991-03-01

    Field and reservoir data bases can have many valuable applications in petroleum exploration. Realizing this value requires careful attention to several general and specific design considerations. The primary general design considerations include (1) developing standard field and reservoir definitions that are applied uniformly across political boundaries (2) applying appropriate variable definitions consistently throughout the data base, (3) providing high rates of coverage for each variable, and (4) testing and editing the data thoroughly for consistency and correctness. Design considerations that are specific to intended uses of a field and reservoir data base include (1) the provision of complete field and reservoir size estimates, (2) the incorporation of a comprehensive set of play definitions, and (3) the use of cross-referencing variables to facilitate combined uses with the various well data bases. Well-designed field reservoir data bases provide a source of information between the often uninformative generality of aggregate statistics and the overwhelming detail of well data bases. They can be used as several different levels of aggregation. Their most valuable applications to exploration are found primarily in three areas: (1) basin, regional, and national reviews, (2) the generation of exploration concepts, and (3) evaluating prospects systematically within a play context.

  20. The Implementation and Maintenance of a Behavioral Safety Process in a Petroleum Refinery

    ERIC Educational Resources Information Center

    Myers, Wanda V.; McSween, Terry E.; Medina, Rixio E.; Rost, Kristen; Alvero, Alicia M.

    2010-01-01

    A values-centered and team-based behavioral safety process was implemented in a petroleum oil refinery. Employee teams defined the refinery's safety values and related practices, which were used to guide the process design and implementation. The process included (a) a safety assessment; (b) the clarification of safety-related values and related…

  1. The Implementation and Maintenance of a Behavioral Safety Process in a Petroleum Refinery

    ERIC Educational Resources Information Center

    Myers, Wanda V.; McSween, Terry E.; Medina, Rixio E.; Rost, Kristen; Alvero, Alicia M.

    2010-01-01

    A values-centered and team-based behavioral safety process was implemented in a petroleum oil refinery. Employee teams defined the refinery's safety values and related practices, which were used to guide the process design and implementation. The process included (a) a safety assessment; (b) the clarification of safety-related values and related…

  2. Influence of process parameters on physicomechanical properties of petroleum coke

    SciTech Connect

    Kuzeev, I.R.; Galiev, L.G.; Ibragimov, I.G.

    1986-09-01

    A study of the reactor temperature field in a delayed coking unit at the refinery yielded data on the rate of cooling, as great as 10 C/min at certain points. In the zones of the coke mass directly adjoining the channels, even higher cooling rates are realized. The authors investigated the distribution of the coefficient of thermal expansion (CTE) of the coke, the values of which were measured because of the established fact of simultaneous deformation of the coke cake with the reactor shell as a result of the difference in CTE between the coke and the metal of the vessel. The cokes used in these studies were obtained in a laboratory reactor in a test unit. The first stage of reversible crystallization takes place in the pitch phase; in the second, chemical bonds are formed, and the petroleum coke is formed directly.

  3. Offshore petroleum development and the comprehensive planning process. Final report

    SciTech Connect

    Emmer, R.E.; Rheams, A.; Wagner, F.

    1992-11-01

    Outer Continental Shelf petroleum activity began in 1947 when the first well was drilled in the Gulf of Mexico out of sight of land. Communities had the opportunity to plan for what would take place as a result of OCS activities and some did through the Section 701 program. But the Department of Public Works, the parishes, and the municipalities were operating with guidance from obsolete State laws. The State statute that defines the comprehensive plan was based on the Standard City Planning Enabling Act of 1928, which was known to be out of date by the end of World War II. In most instances medium and small communities could not afford full-time planners and did not keep abreast of the changing concepts in planning.

  4. Process for removing halogenated aliphatic and aromatic compounds from petroleum products

    DOEpatents

    Googin, J.M.; Napier, J.M.; Travaglini, M.A.

    1983-09-20

    A process is described for removing halogenated aliphatic and aromatic compounds, e.g., polychlorinated biphenyls, from petroleum products by solvent extraction. The halogenated aliphatic and aromatic compounds are extracted from a petroleum product into a polar solvent by contacting the petroleum product with the polar solvent. The polar solvent is characterized by a high solubility for the extracted halogenated aliphatic and aromatic compounds, a low solubility for the petroleum product and considerable solvent power for polyhydroxy compound. The preferred polar solvent is dimethylformamide. A miscible compound, such as, water or a polyhydroxy compound, is added to the polar extraction solvent to increase the polarity of the polar extraction solvent. The halogenated aliphatic and aromatic compounds are extracted from the highly-polarized mixture of water or polyhydroxy compound and polar extraction solvent into a low polar or nonpolar solvent by contacting the water or polyhydroxy compound-polar solvent mixture with the low polar or nonpolar solvent. The halogenated aliphatic and aromatic compounds and the low polar or nonpolar solvent are separated by physical means, e.g., vacuum evaporation. The polar and nonpolar solvents are recovered from recycling. The process can easily be designed for continuous operation. Advantages of the process include that the polar solvent and a major portion of the nonpolar solvent can be recycled, the petroleum products are reclaimable and the cost for disposing of waste containing polychlorinated biphenyls is significantly reduced. 1 fig.

  5. Process for removing halogenated aliphatic and aromatic compounds from petroleum products

    DOEpatents

    Googin, John M.; Napier, John M.; Travaglini, Michael A.

    1983-01-01

    A process for removing halogenated aliphatic and aromatic compounds, e.g., polychlorinated biphenyls, from petroleum products by solvent extraction. The halogenated aliphatic and aromatic compounds are extracted from a petroleum product into a polar solvent by contacting the petroleum product with the polar solvent. The polar solvent is characterized by a high solubility for the extracted halogenated aliphatic and aromatic compounds, a low solubility for the petroleum product and considerable solvent power for polyhydroxy compound. The preferred polar solvent is dimethylformamide. A miscible compound, such as, water or a polyhydroxy compound, is added to the polar extraction solvent to increase the polarity of the polar extraction solvent. The halogenated aliphatic and aromatic compounds are extracted from the highly-polarized mixture of water or polyhydroxy compound and polar extraction solvent into a low polar or nonpolar solvent by contacting the water or polyhydroxy compound-polar solvent mixture with the low polar or nonpolar solvent. The halogenated aliphatic and aromatic compounds and the low polar or nonpolar solvent are separated by physical means, e.g., vacuum evaporation. The polar and nonpolar solvents are recovered from recycling. The process can easily be designed for continuous operation. Advantages of the process include that the polar solvent and a major portion of the nonpolar solvent can be recycled, the petroleum products are reclaimable and the cost for disposing of waste containing polychlorinated biphenyls is significantly reduced.

  6. Inhibition of retrogressive reactions in coal/petroleum co-processing. Final technical report

    SciTech Connect

    Schobert, H.H.; Tomic, J.

    1993-05-25

    The objective of this study was to examine the processes in coal/petroleum coprocessing systems which led to coke formation. Specifically, the interactions between the petroleum residue and coal, leading to retrogressive products, were investigated. Five coals were reacted with five model compounds in order to investigate the coal conversions in a variety of solvents and to determine the role of the solvent in promoting or inhibiting coal conversion. The selected model compounds range from paraffinic to fully aromatic and were chosen as representative of types of compounds that are found in petroleum residua. Coprocessing experiments were conducted using the five coals and three petroleum residua. The effect of temperature on coal conversions was crucial. The coal conversions at 350 and 400{degree}C seem to be governed by the nature of the coal and to a lesser extent by the petroleum residua. Negative coal conversions were observed above 400{degree}C indicating that retrogressive processes had occurred. At temperatures higher than 400{degree}C, the petroleum residua undergo physical and chemical transformations and the influence of the petroleum residua on coal conversions is significant. The structural features of the residues indicated that the residues were predominately coal-derived. An overall increase in aromaticity was observed with increasing temperature which was also accompanied by loss of oxygen functional groups. The retrogressive reactions with non-caking coals involve carbonyl and carboxyl group leading to a final solid characterized by a cross-linked structure. In the case of caking coal, these reactions are governed by loss of aromatic oxygen groups and loss of alkyl groups.

  7. MERCURY IN PETROLEUM AND NATURAL GAS: ESTIMATION OF EMISSIONS FROM PRODUCTION, PROCESSING, AND COMBUSTION

    EPA Science Inventory

    The report gives results of an examination of mercury (Hg) in liquid and gaseous hydrocarbons that are produced and/or processed in the U.S. The Hg associated with petroleum and natural gas production and processing enters the environment primarily via solid waste streams (drilli...

  8. MERCURY IN PETROLEUM AND NATURAL GAS: ESTIMATION OF EMISSIONS FROM PRODUCTION, PROCESSING, AND COMBUSTION

    EPA Science Inventory

    The report gives results of an examination of mercury (Hg) in liquid and gaseous hydrocarbons that are produced and/or processed in the U.S. The Hg associated with petroleum and natural gas production and processing enters the environment primarily via solid waste streams (drilli...

  9. Bioremediation of petroleum wastewater by hyper-phenol tolerant Bacillus cereus: Preliminary studies with laboratory-scale batch process.

    PubMed

    Banerjee, Aditi; Ghoshal, Aloke K

    2017-09-03

    Petroleum wastewater samples from oil refinery and oil exploration site were treated by hyper phenol-tolerant Bacillus cereus (AKG1 and AKG2) in laboratory-scale batch process to assess their bioremediation efficacy. Quality of the treated wastewater samples were analyzed in terms of removal of chemical oxygen demand (COD), total organic carbon (TOC) and ammonium nitrogen content, and improvement of biological oxygen demand (BOD). Adaptation of these bacteria to the toxic environment through structural changes in their cell membranes was also highlighted. Among different combinations, the co-culture of AKG1 and AKG2 showed the best performance in degrading the wastewater samples.

  10. Petroleum exploration contribution to the structural history of Golfe du Lin

    SciTech Connect

    Curnelle, R.

    1988-08-01

    Petroleum exploration has strongly contributed to the knowledge of the post-Hercynian structural history of the Golfe du Lion. It shows three stages: (1) Pyrenean orogenesis which started in the Late Cretaceous and culminated during the Eocene (40-75 Ma), (2) Oligocene rifting associated with the oceanic accretion of the Provencal basin, and (3) post-Messinian deformations due to salt tectonics. Pyrenean deformation of the area seems to have been controlled by its Hercynian inheritance: the major transcurrent faults of the Cevenole belt, Nimes, and the Durance. They favored displacement of the deformation in a northeasterly direction along the fault corridors, inside which the overthrust units were put into place. These east-west-oriented structures show northward vergence. The Pyrenean axial zone in this downthrown part of the belt consist of progressively more northerly units offset by transverse faults. The Oligocene rifting is represented by a series of horsts and deeply subsiding grabens linked to preexisting major faults. The horst are deeply eroded and the Mesozoic carbonates are karstified. The extension of the Messinian evaporitic deposits known throughout the Mediterranean basin is located north of the shallower deep-water well. The gravitational deformation of the salt is expressed by a large number of listric faults which originate in the salt bodies. The sedimentary sequence ends with a thick discordant, erosional, undeformed Pliocene-Quaternary series.

  11. Maps showing petroleum exploration intensity and production in major Cambrian to Ordovician reservoir rocks in the Anadarko Basin

    USGS Publications Warehouse

    Henry, Mitch; Hester, Tim

    1996-01-01

    The Anadarko basin is a large, deep, two-stage Paleozoic basin (Feinstein, 1981) that is petroleum rich and generally well explored. The Anadarko basin province, a geogrphic area used here mostly for the convenience of mapping and data management, is defined by political boundaries that include the Anadarko basin proper. The boundaries of the province are identical to those used by the U.S. Geological Survey (USGS) in the 1995 National Assessment of United Stated Oil and Gas Resources. The data in this report, also identical to those used in the national assessment, are from several computerized data bases including Nehring Research Group (NRG) Associates Inc., Significant Oil and Gas Fields of the United States (1992); Petroleum Information (PI), Inc., Well History Control System (1991); and Petroleum Information (PI), Inc., Petro-ROM: Production data on CD-ROM (1993). Although generated mostly in response to the national assessment, the data presented here arc grouped differently and arc displayed and described in greater detail. In addition, the stratigraphic sequences discussed may not necessarily correlate with the "plays" of the 1995 national assessment. This report uses computer-generated maps to show drilling intensity, producing wells, major fields, and other geologic information relevant to petroleum exploration and production in the lower Paleozoic part of the Anadarko basin province as defined for the U.S. Geological Survey's 1995 national petroleum assessment. Hydrocarbon accumulations must meet a minimum standard of 1 million barrels of oil (MMBO) or 6 billion cubic feet of gas (BCFG) estimated ultimate recovery to be included in this report as a major field or revoir. Mapped strata in this report include the Upper Cambrian to Lower Ordovician Arbuckle and Low Ordovician Ellenburger Groups, the Middle Ordovician Simpson Group, and the Middle to Upper Ordovician Viola Group.

  12. Contributions to a shallow aquifer study by reprocessed seismic sections from petroleum exploration surveys, eastern Abu Dhabi, United Arab Emirates

    USGS Publications Warehouse

    Woodward, D.

    1994-01-01

    The US Geological Survey, in cooperation with the National Drilling Company of Abu Dhabi, is conducting a 4-year study of the fresh and slightly saline groundwater resources of the eastern Abu Dhabi Emirate. Most of this water occurs in a shallow aquifer, generally less than 150 m deep, in the Al Ain area. A critical part of the Al Ain area coincides with a former petroleum concession area where about 2780 km of vibroseis data were collected along 94 seismic lines during 1981-1983. Field methods, acquistion parameters, and section processing were originally designed to enhance reflections expected at depths ranging from 5000 to 6000 m, and subsurface features directly associated with the shallow aquifer system were deleted from the original seismic sections. The original field tapes from the vibroseis survey were reprocessed in an attempt to extract shallow subsurface information (depths less than 550 m) for investigating the shallow aquifer. A unique sequence of reproccessing parameters was established after reviewing the results from many experimental tests. Many enhancements to the resolution of shallow seismic reflections resulted from: (1) application of a 20-Hz, low-cut filter; (2) recomputation of static corrections to a datum nearer the land surface; (3) intensive velocity analyses; and (4) near-trace muting analyses. The number, resolution, and lateral continuity of shallow reflections were greatly enhanced on the reprocessed sections, as was the delineation of shallow, major faults. Reflections on a synthetic seismogram, created from a borehole drilled to a depth of 786 m on seismic line IQS-11, matcheddprecisely with shallow reflections on the reprocessed section. The 33 reprocessed sections were instrumental in preparing a map showing the major structural features that affect the shallow aquifer system. Analysis of the map provides a better understanding of the effect of these shallow features on the regional occurrence, movement, and quality of

  13. Beyond the petroleum system

    SciTech Connect

    Magoon, L.B.; Sanchez, R.M.O.

    1995-12-01

    The first joint AAPG/AMGP (Association of Mexican Petroleum Geologists) Hedberg Conference on {open_quotes}Geologic Aspects of Petroleum Systems{close_quotes} was held October 2-6, 1994, in Mexico City, Mexico. This research conference attracted nearly 150 geoscientists from 15 countries; 41 papers and 27 posters were presented. The opposite response occurred when the petroleum-system concept was presented more than 20 yr ago; it was largely overlooked. In the past decade, however, interest in this concept as an exploration tool has been growing rapidly. The research conference addressed the concept itself, its elements and processes, the tools and methods used to identify a petroleum system, and many case studies. We summarize responses by the participants to the following three questions: First, what is gained from using the petroleum-system concept? Second, in what new directions will the petroleum-system concept take us in the future? Third, has anything new come out of this research conference?

  14. Petroleum: An Energy Profile 1999

    EIA Publications

    1999-01-01

    Explains in layman's terms the major components and operations of the U.S. petroleum industry that include: petroleum products, resources and reserves, drilling and exploration, refining, storage and transportation, imports, exports, and petroleum marketing.

  15. Mapping the petroleum system - An investigative technique to explore the hydrocarbon fluid system

    USGS Publications Warehouse

    Magoon, L.B.; Dow, W.G.

    2000-01-01

    Creating a petroleum system map includes a series of logical steps that require specific information to explain the origin in time and space of discovered hydrocarbon occurrences. If used creatively, this map provides a basis on which to develop complementary plays and prospects. The logical steps include the characterization of a petroleum system (that is, to identify, map, and name the hydrocarbon fluid system) and the summary of these results on a folio sheet. A petroleum system map is based on the understanding that there are several levels of certainty from "guessing" to "knowing" that specific oil and gas accumulations emanated from a particular pod of active source rock. Levels of certainty start with the close geographic proximity of two or more accumulations, continues with the close stratigraphic proximity, followed by the similarities in bulk properties, and then detailed geochemical properties. The highest level of certainty includes the positive geochemical correlation of the hydrocarbon fluid in the accumulations to the extract of the active source rock. A petroleum system map is created when the following logic is implemented. Implementation starts when the oil and gas accumulations of a petroleum province are grouped stratigraphically and geographically. Bulk and geochemical properties are used to further refine the groups through the determination of genetically related oil and gas types. To this basic map, surface seeps and well shows are added. Similarly, the active source rock responsible for these hydrocarbon occurrences are mapped to further define the extent of the system. A folio sheet constructed for a hypothetical case study of the Deer-Boar(.) petroleum system illustrates this methodology.

  16. Use and application of organic geochemical techniques related to exploration and production of petroleum reservoirs

    SciTech Connect

    Jensen, H.; Hall, P.B.; Bharati, S.

    1995-08-01

    Petroleum geochemical data are essential to many aspects of reservoir evaluation, for example, in the detection of barriers to fluid-flow and the identification of different reservoir compartments. The analytical techniques used in reservoir geochemistry include bulk screening analyses (e.g. Rock-Eval and Iatroscan TLC-FID), detailed gas chromatographic analyses (e.g. whole oil GC) and compound specific analyses (e.g. thermal extraction GC-MS and GC-IRMS). New techniques which have proved to be particularly useful include Iatroscan TLC-FID and GC-IRMS. Optimum sampling and analytical programs are crucial to acquiring sufficient data which are appropriate for specific reservoirs. Both fluid and rock samples are necessary for characterization of the petroleum populations present in the reservoir, as occasionally rock extracts are different in composition to the produced fluids. Sampling programs depend on the complexity of the reservoir, which can vary from simple {open_quote}tanks{close_quotes} with relatively uniform petroleum requiring a relatively small sampling density, to highly compartmentalized reservoirs with very heterogeneous petroleum types. In both cases, however, a range of compound specific analytical techniques will be needed to discriminate between different petroleum populations. Specific barriers to fluid flow such as tarmats and cemented intervals can be detected using screening techniques. Evaluation of filling point(s) and petroleum populations, reservoir compartmentalization etc. can be performed using quantitative and compound specific analysis data. Potential satellite field locations can also be identified based on the knowledge of filling directions and other geochemical data. The application of different analytical techniques in the assessment of reservoirs is demonstrated using examples from carbonate and clastic reservoirs of varying complexity.

  17. An air quality emission inventory of offshore operations for the exploration and production of petroleum by the Mexican oil industry

    NASA Astrophysics Data System (ADS)

    Villasenor, R.; Magdaleno, M.; Quintanar, A.; Gallardo, J. C.; López, M. T.; Jurado, R.; Miranda, A.; Aguilar, M.; Melgarejo, L. A.; Palmerín, E.; Vallejo, C. J.; Barchet, W. R.

    An air quality screening study was performed to assess the impacts of emissions from the offshore operations of the oil and gas exploration and production by Mexican industry in the Campeche Sound, which includes the states of Tabasco and Campeche in southeast Mexico. The major goal of this study was the compilation of an emission inventory (EI) for elevated, boom and ground level flares, processes, internal combustion engines and fugitive emissions. This inventory is so far the most comprehensive emission register that has ever been developed for the Mexican petroleum industry in this area. The EI considered 174 offshore platforms, the compression station at Atasta, and the Maritime Ports at Dos Bocas and Cayo Arcas. The offshore facilities identified as potential emitters in the area were the following: (1) trans-shipment stations, (2) a maritime floating port terminal, (3) drilling platforms, (4) crude oil recovering platforms, (5) crude oil production platforms, (6) linking platforms, (7) water injection platforms, (8) pumping platforms, (9) shelter platforms, (10) telecommunication platforms, (11) crude oil measurement platforms, and (12) flaring platforms. Crude oil storage tanks, helicopters and marine ship tankers were also considered to have an EI accurate enough for air quality regulations and mesoscale modeling of atmospheric pollutants. Historical ambient data measure at two onshore petroleum facilities were analyzed to measure air quality impacts on nearby inhabited coastal areas, and a source-receptor relationship for flares at the Ixtoc marine complex was performed to investigate health-based standards for offshore workers. A preliminary air quality model simulation was performed to observe the transport and dispersion patterns of SO 2, which is the main pollutant emitted from the offshore platforms. The meteorological wind and temperature fields were generated with CALMET, a diagnostic meteorological model that used surface observations and upper

  18. An evaluation of the suitability of ERTS data for the purposes of petroleum exploration. [Anadarko Basin of Texas and Oklahoma

    NASA Technical Reports Server (NTRS)

    Collins, R. J.; Mccown, F. P.; Stonis, L. P.; Petzel, G.; Everett, J. R.

    1974-01-01

    This experiment was designed to determine the types and amounts of information valuable to petroleum exploration extractable from ERTS data and the cost of obtaining the information using traditional or conventional means. It was desired that an evaluation of this new petroleum exploration tool be made in a geologically well known area in order to assess its usefulness in an unknown area. The Anadarko Basin lies in western Oklahoma and the panhandle of Texas. It was chosen as a test site because there is a great deal of published information available on the surface and subsurface geology of the area, and there are many known structures that act as traps for hydrocarbons. This basin is similar to several other large epicontinental sedimentary basins. It was found that ERTS imagery is an excellent tool for reconnaissance exploration of large sedimentary basins or new exploration provinces. For the first time, small and medium size oil companies can rapidly and effectively analyze exploration provinces as a whole.

  19. The microbiology of hydrocarbon degradation in subsurface petroleum reservoirs: perspectives and prospects.

    PubMed

    Röling, Wilfred F M; Head, Ian M; Larter, Steve R

    2003-06-01

    The majority of the Earth's petroleum resource is partly biodegraded. This is of considerable practical significance and can limit economic exploitation of petroleum reserves and lead to problems during petroleum production. Knowledge of the microorganisms present in petroleum reservoirs, their physiological properties and the biochemical potential for hydrocarbon degradation benefits successful petroleum exploration. Anaerobic conditions prevail in petroleum reservoirs and biological hydrocarbon degradation is apparently inhibited at temperatures above 80-90 degrees C. We summarise available knowledge and conjecture on the dominant biological processes active during subsurface petroleum biodegradation.

  20. Petroleum refinery stripped sour water treatment using the activated sludge process.

    PubMed

    Merlo, Rion; Gerhardt, Matthew B; Burlingham, Fran; De Las Casas, Carla; Gill, Everett; Flippin, T Houston

    2011-11-01

    A pilot study was performed over 91 days to determine if the activated sludge process could treat a segregated stripped sour water (SSW) stream from a petroleum refinery. The study was performed in two periods. The first period was terminated after 19 days, as a result of excessive sludge bulking. The elimination of sludge bulking during the 70-day second period is attributed to operational changes, which included aerating the influent to oxidize reduced sulfur, adjusting the influent pH, and adding micronutrients to satisfy biological requirements. The pilot plant provided a chemical oxygen demand (COD) removal of up to 93%. Nitrification was achieved, with effluent ammonia values < 1 mg-N/L. These results indicate that direct treatment of SSW with the activated sludge process is possible and has direct application to full-scale petroleum refinery wastewater plant upgrades.

  1. The utility of petroleum seismic exploration data in delineating structural features within salt anticlines

    USGS Publications Warehouse

    Stockton, S.L.; Balch, Alfred H.

    1978-01-01

    The Salt Valley anticline, in the Paradox Basin of southeastern Utah, is under investigation for use as a location for storage of solid nuclear waste. Delineation of thin, nonsalt interbeds within the upper reaches of the salt body is extremely important because the nature and character of any such fluid- or gas-saturated horizons would be critical to the mode of emplacement of wastes into the structure. Analysis of 50 km of conventional seismic-reflection data, in the vicinity of the anticline, indicates that mapping of thin beds at shallow depths may well be possible using a specially designed adaptation of state-of-the-art seismic oil-exploration procedures. Computer ray-trace modeling of thin beds in salt reveals that the frequency and spatial resolution required to map the details of interbeds at shallow depths (less than 750 m) may be on the order of 500 Hz, with surface-spread lengths of less than 350 m. Consideration should be given to the burial of sources and receivers in order to attenuate surface noise and to record the desired high frequencies. Correlation of the seismic-reflection data with available well data and surface geology reveals the complex, structurally initiated diapir, whose upward flow was maintained by rapid contemporaneous deposition of continental clastic sediments on its flanks. Severe collapse faulting near the crests of these structures has distorted the seismic response. Evidence exists, however, that intrasalt thin beds of anhydrite, dolomite, and black shale are mappable on seismic record sections either as short, discontinuous reflected events or as amplitude anomalies that result from focusing of the reflected seismic energy by the thin beds; computer modeling of the folded interbeds confirms both of these as possible causes of seismic response from within the salt diapir. Prediction of the seismic signatures of the interbeds can be made from computer-model studies. Petroleum seismic-reflection data are unsatisfactory for

  2. An evaluation of the suitability of ERTS data for the purposes of petroleum exploration. [Anadarko Basin in Oklahoma and Texas

    NASA Technical Reports Server (NTRS)

    Everett, J. R.; Petzel, G.

    1974-01-01

    This investigation was undertaken to determine the types and amounts of information valuable to petroleum exploration that are extractable from ERTS data and to determine the cost of obtaining the information from ERTS relative to costs using traditional or conventional means. In particular, it was desirable to evaluate this new petroleum exploration tool in a geologically well-known area in order to assess its potential usefulness in an unknown area. In light of the current energy situation, it is felt that such an evaluation is important in order to best utilize technical efforts with customary exploration tools, by rapidly focusing attention on the most promising areas in order to reduce the time required to go through the exploration cycle and to maximize cost savings. The Anadarko Basin lies in western Oklahoma and the panhandle of Texas (Figure 1). It was chosen as a test site because there is a great deal of published information available on the surface and subsurface geology of the area, there are many known structures that act as traps for hydrocarbons, and it is similar to several other large epicontinental sedimentary basins.

  3. An evaluation of the suitability of ERTS data for the purposes of petroleum exploration. [lithology and geological structure of Anadarko Basin of Oklahoma and Texas

    NASA Technical Reports Server (NTRS)

    Collins, R. J. (Principal Investigator); Mccown, F. P.; Stonis, L. P.; Petzel, G. J.; Everett, J. R.

    1974-01-01

    The author has identified the following significant results. ERTS-1 data give exploration geologists a new perspective for looking at the earth. The data are excellent for interpreting regional lithologic and structural relationships and quickly directing attention to areas of greatest exploration interest. Information derived from ERTS data useful for petroleum exploration include: linear features, general lithologic distribution, identification of various anomalous features, some details of structures controlling hydrocarbon accumulation, overall structural relationships, and the regional context of the exploration province. Many anomalies (particularly geomorphic anomalies) correlate with known features of petroleum exploration interest. Linears interpreted from the imagery that were checked in the field correlate with fractures. Bands 5 and 7 and color composite imagery acquired during the periods of maximum and minimum vegetation vigor are best for geologic interpretation. Preliminary analysis indicates that use of ERTS imagery can substantially reduce the cost of petroleum exploration in relatively unexplored areas.

  4. Inhibition of retrogressive reactions in coal/petroleum co-processing

    SciTech Connect

    Schobert, H.H.; Tomic, J.

    1992-01-01

    The overall objective of this project is to develop a fundamental understanding of the reactions occurring at the onset of coke formation during the co-processing of coals with petroleum residua. The specific objectives include examination of chemical components, or groups of components, in coals and petroleum feedstocks to quantify and rank the effects of these components in retarding or enhancement of coke formation. The work involves bench scale reactions in microautoclaves, supplemented by studies of the carbonaceous residues by such techniques as diffuse reflectance Fourier transform infrared spectroscopy and {sup 13}C nuclear magnetic resonance spectrometry. During this reporting period work focused on identification of mechanisms of coke formation. The objective of this task is to identify those compounds or components which are specifically responsible for initiating coke formation.

  5. Simulation and optimization technologies for petroleum waste management and remediation process control.

    PubMed

    Qin, X S; Huang, G H; He, L

    2009-01-01

    Leakage and spill of petroleum hydrocarbons from underground storage tanks and pipelines have posed significant threats to groundwater resources across many petroleum-contaminated sites. Remediation of these sites is essential for protecting the soil and groundwater resources and reducing risks to local communities. Although many efforts have been made, effective design and management of various remediation systems are still challenging to practitioners. In recent years, the subsurface simulation model has been combined with techniques of optimization to address important problems of contaminated site management. The combined simulation-optimization system accounts for the complex behavior of the subsurface system and identifies the best management strategy under consideration of the management objectives and constraints. During the past decades, a large number of studies were conducted to simulate contaminant flow and transport in the subsurface and seek cost-effective remediation designs. This paper gives a comprehensive review on recent developments, advancements, challenges, and barriers associated with simulation and optimization techniques in supporting process control of petroleum waste management and site remediation. A number of related methodologies and applications were examined. Perspectives of effective site management were investigated, demonstrating many demanding areas for enhanced research efforts, which include issues of data availability and reliability, concerns in uncertainty, necessity of post-modeling analysis, and usefulness of development of process control techniques.

  6. Conference on the topic: {open_quotes}Exploration and production of petroleum and gas from chalk reservoirs worldwide{close_quotes}

    SciTech Connect

    Kuznetsov, V.G.

    1995-07-01

    More than 170 delegates from 14 countries in Europe, North America, Africa, and Asia took part in a conference on the topic: Exploration and Production of Petroleum and Gas from Chalk Reservoirs Worldwide. The conference was held in Copenhagen, Denmark in September,1994, and was a joint meeting of the American Association of Petroleum Geologists (AAPG), and the European Association of Petroleum Geoscientists and Engineers (EAPG). In addition to the opening remarks, 25 oral and nine poster reports were presented. The topics included chalk deposits as reservoir rocks, the occurrence of chalk deposits worldwide, the North Sea oil and gas fields, and other related topics.

  7. Trends in international exploration processes

    SciTech Connect

    Woller, K.L.

    1995-06-01

    Modern techniques for international exploration differ from the classical approaches. Traditionally oil and gas companies entering a new area would mount large geological and geophysical campaigns costing a lot of money. With the maturing of exploration in many basins, it is unusual to go where no one has gone before. This situation often provides a ready data base for study at a relatively low cost. The challenge for the geoscientist is to gather, improve and re-interpret existing data to uncover ideas or plays that were previously missed or unseen. Some methods for achieving this new view are: scanning and enhancing seismic data, incorporating larger data sets to get a regional interpretation, map digitization and analysis, digitizing logs for detailed correlation and analysis, and performing depth conversions. The impact of these techniques can lead to recognition of deeper plays, new source rocks, changes in structural interpretations and changes in estimates of timing of hydrocarbon migration.

  8. Evaluation of electrochemical processes for the removal of several target aromatic hydrocarbons from petroleum contaminated water.

    PubMed

    Alsalka, Yamen; Karabet, François; Hashem, Shahir

    2011-03-01

    Ground and surface water contamination resulting from the leakage of crude oil and refined petroleum products is a serious and growing environmental problem throughout the world. Consequently, a study of the use of electrochemical treatment in the clean-up was undertaken with the aim of reducing the water contamination by aromatic pollutants to more acceptable levels. In the experiments described, water contamination by refined petroleum products was simulated under laboratory conditions. Electrochemical treatment, using aluminium electrodes, has been optimised by full factorial design and surface response analysis in term of BTEX and PAHs removal and energy consumption. The optimal conditions of pH, current density, electrolysis time, electrolyte type, and electrolyte concentration have then been applied in the treatment of real water samples which were monitored as petroleum contaminated samples. Treatment results have shown that electrochemical methods could achieve the concentration of these pollutants to undetectable levels in particular groundwater and surface water, hence, they can be highly effective in the remediation of water contaminated by aromatic hydrocarbons, and the use of these processes is therefore recommended.

  9. A descriptive account of benthic macrofauna and sediment from an area of planned petroleum exploration in the southern Caspian Sea

    NASA Astrophysics Data System (ADS)

    Parr, T. D.; Tait, R. D.; Maxon, C. L.; Newton, F. C., III; Hardin, J. L.

    2007-01-01

    As a precursor to petroleum exploration and potential development in the offshore southern Caspian Sea, sediment was collected from 42 stations (67-692 m water depths) and analyzed for grain size, total organic carbon, and species abundance, diversity, and biomass of benthic macrofauna. Sediment ranged from very fine sands to very fine silts, with moderately enriched organic carbon levels (avg. 2.3%). A significant positive correlation between finer grain size, organic carbon, and water depth was evident. The macrofauna was numerically dominated by annelid worms (44% of total organisms), crustaceans (37%), and molluscs (18%). Of 71 species identified, the greatest diversity was represented by two crustacean orders (22 amphipod species, 11 cumacean species), 14 gastropod mollusc species, and six oligochaete worm species. Except for annelids, all major taxa exhibited significant decline in abundance, species density, and biomass with increasing water depth. Low species dominance and abundance characterized deeper stations, indicating stressed habitat from hypoxia/anoxia at the sediment-water boundary. Petroleum exploration and development at slope depths greater than 150 m should have relatively little impact upon a macrofauna that is naturally impoverished due to oxygen deficiency. Shelf depths (<150 m) are not oxygen limited and support a more diverse macrofaunal community, which could be more vulnerable to discharged cuttings and adhered drilling muds, but able to recover more quickly than deeper biota.

  10. Species identification and concentration quantification of crude oil samples in petroleum exploration using the concentration-synchronous-matrix-fluorescence spectroscopy.

    PubMed

    Wang, Chunyan; Li, Wendong; Luan, Xiaoning; Liu, Qianqian; Zhang, Jinliang; Zheng, Ronger

    2010-04-15

    In this paper, the author has developed and described a novel method for species identification and concentration quantification of crude oil sample in petroleum exploration using the concentration auxiliary parameter synchronous fluorescence technique. By introducing concentration value as a parameter, a new concentration-synchronous-matrix-fluorescence (CSMF) spectrum has been formed with a series of synchronous fluorescence spectra (SFS) at different levels of concentration. It is observed that the SFS varied with concentration level and the profiles of CSMF changed from species to species. Therefore, they can be used for species identification and concentration quantification. The CSMF of 31 crude oil samples from 20 different bore fields has been obtained to establish the database. With surface fitting, CSMF has been successfully used to discriminate the different crude oil samples from different bore fields precisely. It is also used for the quantitative analysis of concentration. Within the interesting concentration range of 10(-4)g/L to 10 g/L, the curve fitting has been used to achieve good analytical results with the relative deviation below 3%. To evaluate the practicality and efficiency of this method in field, double-blind experiments have been carried out and the relative deviation was found to be 3 times lower than by traditional fluorescence approaches. The obtained results suggest that the newly developed method may become a more specifically applicable means in petroleum exploration. (c) 2010 Elsevier B.V. All rights reserved.

  11. Attachment Relationships and the Career Exploration Process.

    ERIC Educational Resources Information Center

    Ketterson, Timothy U.; Blustein, David L.

    1997-01-01

    Examines the role of parent-adolescent attachment relationships in the career exploration process. Results, based on 137 college students, indicate that attachment to parents is positively associated with environmental exploration. However, parental attachment did not influence traditionality of exploration. Age played a significant role in career…

  12. Regional seismic lines reprocessed using post-stack processing techniques; National Petroleum Reserve, Alaska

    USGS Publications Warehouse

    Miller, John J.; Agena, W.F.; Lee, M.W.; Zihlman, F.N.; Grow, J.A.; Taylor, D.J.; Killgore, Michele; Oliver, H.L.

    2000-01-01

    This CD-ROM contains stacked, migrated, 2-Dimensional seismic reflection data and associated support information for 22 regional seismic lines (3,470 line-miles) recorded in the National Petroleum Reserve ? Alaska (NPRA) from 1974 through 1981. Together, these lines constitute about one-quarter of the seismic data collected as part of the Federal Government?s program to evaluate the petroleum potential of the Reserve. The regional lines, which form a grid covering the entire NPRA, were created by combining various individual lines recorded in different years using different recording parameters. These data were reprocessed by the USGS using modern, post-stack processing techniques, to create a data set suitable for interpretation on interactive seismic interpretation computer workstations. Reprocessing was done in support of ongoing petroleum resource studies by the USGS Energy Program. The CD-ROM contains the following files: 1) 22 files containing the digital seismic data in standard, SEG-Y format; 2) 1 file containing navigation data for the 22 lines in standard SEG-P1 format; 3) 22 small scale graphic images of each seismic line in Adobe Acrobat? PDF format; 4) a graphic image of the location map, generated from the navigation file, with hyperlinks to the graphic images of the seismic lines; 5) an ASCII text file with cross-reference information for relating the sequential trace numbers on each regional line to the line number and shotpoint number of the original component lines; and 6) an explanation of the processing used to create the final seismic sections (this document). The SEG-Y format seismic files and SEG-P1 format navigation file contain all the information necessary for loading the data onto a seismic interpretation workstation.

  13. A nested case-control study of brain tumors among employees at a petroleum exploration and extraction research facility.

    PubMed

    Buffler, Patricia A; Kelsh, Michael A; Kalmes, Renee M; Lau, Edmund C; Chapman, Pamela S; Wood, Susan M; Brorby, Greg P; Silva, J Michael; Hooper, H Christopher; Rizzo, Barbara Dowdle; Wood, Ralph

    2007-07-01

    Work-related exposures potentially associated with a cluster of brain tumors at a petroleum exploration and extraction research facility were evaluated in a nested case-control study. Fifteen cases were identified in the original cohort and 150 matched controls were selected. Odds ratios (ORs) for occupational exposure to petroleum, radiation, solvents, magnetic fields, and work activities were near or below 1.0. ORs near 1.5 were observed for: working with computers (OR = 1.47; 95% confidence interval [CI] = 0.30-9.35); work-related travel (OR = 1.48; 95% CI = 0.25-5.95), and travel immunizations (OR = 1.62; 95% CI = 0.23-9.45). Higher ORs were observed for work in administrative and marketing buildings and for achieving a master's or higher degree (OR = 2.0, 95% CI = 0.4-10.7). While some ORs above 1.5 were noted, no work-related chemical and physical exposures were significantly associated with the occurrence of brain tumors among employees at this facility.

  14. Transgressive valley-fill sequences: Implications to sequence stratigraphy and petroleum exploration

    SciTech Connect

    Horne, J.C.; Devine, P.E.; Wheeler, D.M.; Scott, A.J. )

    1990-09-01

    Large amounts of hydrocarbons have been discovered in association with valley-fill deposits. The lateral and vertical distribution of siliciclastic rock types in transgressive valley-fill deposits is governed by the stratigraphic sequence. The sequence stratigraphy is controlled primarily by the interaction of subsidence, eustacy, and volume of sediments. Reservoir-potential siliciclastics accumulate in valley-fill, estuarine, and wave-reworked transgressive deposits. Differences in the spectrum of transgressive deposits can be attributed to variations in the rate of eustatic sea-level rise, subsidence, and sediment supply. Rapid rates of subsidence and/or eustatic sea-level rise relative to sediment supply result in an abrupt landward shift in facies and valleys filled primarily with estuarine muds. Examples include the Opeche formation of the Powder River Basin and the lower Wilcox and Yegua formations of the Texas Gulf Coast. The valley-fill mudstones in these units trap hydrocarbons in laterally adjacent facies. Slower rates of relative sea-level rise, or increased sediment supply, result in valley-fill sequences with thicker basal fluvial deposits overlain by estuarine to marine sands and muds. Petroleum is produced from fluvial-estuarine reservoirs within this type of valley-fill in the Morrow Formation in southeast Colorado and southwest Kansas and the Doig Formation of western Alberta. Complex valley-fill sequences consisting of multiple backstepping progradational parasequences occur in association with varying rates of eustatic sea-level rise or subsidence relative to sediment supply Examples from the Muddy Sandstone of the Powder River basin illustrate such complexities. Petroleum has been produced from fluvial, bayhead-delta, and barrier island facies of the Muddy Sandstone valley-fills.

  15. Research of combined adsorption-coagulation process in treating petroleum refinery effluent.

    PubMed

    Wang, Bing; Shui, Yiyu; Ren, Hongyang; He, Min

    2017-02-01

    The petroleum refinery industry generates a significant amount of wastewater that contains a high level of organic matter, which calls for effective and costly treatments. In this research, the effectiveness of the petroleum refinery effluent (PRE) treatment with physicochemical process of combined adsorption and coagulation was evaluated. The effects of initial pH, hydraulic condition , and combined sequence of treatment process, different treating reagent types and dosages on the chemical oxygen demand (COD) removal were investigated. Additionally, the elimination efficiency of pollutant wastewater was monitored by gas chromatography-mass spectrometry (GC-MS), and Fourier transformed infrared (FT-IR) spectrophotometer was adopted to describe the structure of the wastewater. Wooden activated carbon was chosen as adsorbent at the dosage of 10 g/L as a primary treatment, and 1500 mg/L polymeric magnesium ferric sulfate was used in coagulation. Results showed that adsorption and subsequent coagulation displayed the best performance when initial pH was 9 at shear rates (G) of G1 = 65 s(-1) and G2 = 20 s(-1), which reached maximal removal rate of COD and total organic carbon GC-MS testing result revealed that adsorption was effective in phenols and iso-alkanes removal, whereas coagulation was good at removing esters and n-alkanes.

  16. Evaluation Of In Situ Steam-Injection Processes For Reduction Of Petroleum Compounds Within An Abandoned Canal

    EPA Science Inventory

    A conceptual approach of a novel application of in-situ thermal processes that would either use a steam injection process or a steam/surfactant injection process was considered to remediate petroleum contaminated sediment residing in an abandoned canal. Laboratory tests were c...

  17. Evaluation Of In Situ Steam-Injection Processes For Reduction Of Petroleum Compounds Within An Abandoned Canal

    EPA Science Inventory

    A conceptual approach of a novel application of in-situ thermal processes that would either use a steam injection process or a steam/surfactant injection process was considered to remediate petroleum contaminated sediment residing in an abandoned canal. Laboratory tests were c...

  18. An integrated bioremediation process for petroleum hydrocarbons removal and odor mitigation from contaminated marine sediment.

    PubMed

    Zhang, Zhen; Lo, Irene M C; Yan, Dickson Y S

    2015-10-15

    This study developed a novel integrated bioremediation process for the removal of petroleum hydrocarbons and the mitigation of odor induced by reduced sulfur from contaminated marine sediment. The bioremediation process consisted of two phases. In Phase I, acetate was dosed into the sediment as co-substrate to facilitate the sulfate reduction process. Meanwhile, akaganeite (β-FeOOH) was dosed in the surface layer of the sediment to prevent S(2-) release into the overlying seawater. In Phase II, NO3(-) was injected into the sediment as an electron acceptor to facilitate the denitrification process. After 20 weeks of treatment, the sequential integration of the sulfate reduction and denitrification processes led to effective biodegradation of total petroleum hydrocarbons (TPH), in which about 72% of TPH was removed. In Phase I, the release of S(2-) was effectively controlled by the addition of akaganeite. The oxidation of S(2-) by Fe(3+) and the precipitation of S(2-) by Fe(2+) were the main mechanisms for S(2-) removal. In Phase II, the injection of NO3(-) completely inhibited the sulfate reduction process. Most of residual AVS and S(0) were removed within 4 weeks after NO3(-) injection. The 16S rRNA clone library-based analysis revealed a distinct shift of bacterial community structure in the sediment over different treatment phases. The clones affiliated with Desulfobacterales and Desulfuromonadales were the most abundant in Phase I, while the clones related to Thioalkalivibrio sulfidophilus, Thiohalomonas nitratireducens and Sulfurimonas denitrificans predominated in Phase II. Copyright © 2015 Elsevier Ltd. All rights reserved.

  19. Petroleum supply monthly, April 1994

    SciTech Connect

    Not Available

    1994-04-01

    Data presented in the Petroleum Supply Monthly (PSM) describe the supply and disposition of petroleum products in the United States and major US geographical regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the US. The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the US.

  20. The Research of Petroleum Enterprise Information System Architecture Based on the G/S Model

    NASA Astrophysics Data System (ADS)

    Rui, Liu; Xirong, Guo; Fang, Miao

    This paper explains the petroleum engineering technologies of petroleum enterprise supported by G/S model, which combine process of exploring, developing, and transporting of petroleum enterprise, these key technologies with spatial information technology supported by Digital Earth Platform, resulting in the improvement of the scientificity, accuracy, and rationality of the petroleum engineering technologies and the reduction of the cost and the increase of the benefits.

  1. Process for removing halogenated aliphatic and aromatic compounds from petroleum products. [Polychlorinated biphenyls; methylene chloride; perchloroethylene; trichlorofluoroethane; trichloroethylene; chlorobenzene

    DOEpatents

    Googin, J.M.; Napier, J.M.; Travaglini, M.A.

    1982-03-31

    A process for removing halogenated aliphatic and aromatic compounds, e.g., polychlorinated biphenyls, from petroleum products by solvent extraction. The halogenated aliphatic and aromatic compounds are extracted from a petroleum product into a polar solvent by contracting the petroleum product with the polar solvent. The polar solvent is characterized by a high solubility for the extracted halogenated aliphatic and aromatic compounds, a low solubility for the petroleum product and considerable solvent power for polyhydroxy compound. The preferred polar solvent is dimethylformamide. A miscible polyhydroxy compound, such as, water, is added to the polar extraction solvent to increase the polarity of the polar extraction solvent. The halogenated aliphatic and aromatic compounds are extracted from the highly-polarized mixture of polyhydroxy compound and polar extraction solvent into a low polar or nonpolar solvent by contacting the polyhydroxy compound-polar solvent mixture with the low polar or nonpolar solvent. The halogenated aliphatic and aromatic compounds in the low polar or nonpolar solvent by physical means, e.g., vacuum evaporation. The polar and nonpolar solvents are recovered for recycling. The process can easily be designed for continuous operation. Advantages of the process include that the polar solvent and a major portion of the nonpolar solvent can be recycled, the petroleum products are reclaimable and the cost for disposing of waste containing polychlorinated biphenyls is significantly reduced. 2 tables.

  2. [A socio-economic profile of exposed populations to petroleum exploration residues].

    PubMed

    Corrêa, Gyselle Guimarães; Malhão, Thainá Alves; Asmus, Carmen Ildes Rodrigues Fróes; Coeli, Cláudia Medina

    2011-09-01

    Environmental Macro-Area Five (EMA-5) is located in Rio de Janeiro. Their municipalities are suffering the consequences of rapid urbanization, especially after the discovery of large reserves of petroleum and natural gas (PNG) in the Campos Basin. To describe the socio-economic profile of the region and compare their indicators in space and time. This is an ecological study, which made comparisons between the 11 municipalities of EMA-5. It is based on the behavior of the indicators before and after the increase in royalties and special participatioms (RPE) and the division of the production areas of PNG (main production area - MPA - and the border zone of MPA, BZMPA). The period of analysis of the indicators ranged from 1991 to 2005. Higher values of gross domestic product per capita were found in the municipalities of MPA, especially Macaé. The same occurred in the RPE per capita, especially Rio das Ostras (higher value) and Nova Friburgo (lower value). In 2004, more than 50% of total revenues of municipalities were dependent on the funds derived from royalties. In 2000, Nova Friburgo had the best Human Development Index. The highest value of the Quality Index of Municipalities Potential for Development was found in Macaé. The major indexes of Social Exclusion was found in Macaé, Nova Friburgo and Rio das Ostras. It was found, in the municipalities of MPA, economic growth with great exclusive reliance on royalties. It should invest in alternative economic activities for which there is no damage to the population with the completion of these resources.

  3. Rapid evolution of redox processes in a petroleum hydrocarbon-contaminated aquifer

    USGS Publications Warehouse

    Chapelle, F.H.; Bradley, P.M.; Lovley, D.R.; O'Neil, Kyle; Landmeyer, J.E.

    2002-01-01

    Ground water chemistry data collected over a six-year period show that the distribution of contaminants and redox processes in a shallow petroleum hydrocarbon-contaminated aquifer has changed rapidly over time. Shortly after a gasoline release occurred in 1990, high concentrations of benzene were present near the contaminant source area. In this contaminated zone, dissolved oxygen in ground water was depleted, and by 1994 Fe(III) reduction and sulfate reduction were the predominant terminal electron accepting processes. Significantly, dissolved methane was below measurable levels in 1994, indicating the absence of significant methanogenesis. By 1996, however, depletion of solid-phase Fe(III)-oxyhydroxides in aquifer sediments and depletion of dissolved sulfate in ground water resulted in the onset of methanogenesis. Between 1996 and 2000, water-chemistry data indicated that methanogenic metabolism became increasingly prevalent. Molecular analysis of 16S-rDNA extracted from sediments shows the presence of a more diverse methanogenic community inside as opposed to outside the plume core, and is consistent with water-chemistry data indicating a shift toward methanogenesis over time. This rapid evolution of redox processes reflects several factors including the large amounts of contaminants, relatively rapid ground water flow (???0.3 m/day [???1 foot/day]), and low concentrations of microbially reducible Fe(III) oxyhydroxides (???1 ??mol/g) initially present in aquifer sediments. These results illustrate that, under certain hydrologic conditions, redox conditions in petroleum hydrocarbon-contaminated aquifers can change rapidly in time and space, and that the availability of solid-phase Fe(III)-oxyhydroxides affects this rate of change.

  4. Prebiotic petroleum.

    PubMed

    Ali, Mekki-Berrada

    2014-12-01

    This short communication summarizes a global and continuous reflection on the origins of life. "Prebiotic Petroleum" assumes that "the class of most complex molecules of life that may have geochemical and abiotic origin is the class of fatty acids with long aliphatic chains" and proposes a physical process for the formation of liposomes. Developments following the workshop start from the idea that the liposomes also acquire ion exchange channels physically during their forming process.

  5. Prebiotic Petroleum

    NASA Astrophysics Data System (ADS)

    Ali, Mekki-Berrada

    2014-12-01

    This short communication summarizes a global and continuous reflection on the origins of life. "Prebiotic Petroleum" assumes that " the class of most complex molecules of life that may have geochemical and abiotic origin is the class of fatty acids with long aliphatic chains" and proposes a physical process for the formation of liposomes. Developments following the workshop start from the idea that the liposomes also acquire ion exchange channels physically during their forming process.

  6. Exploration of Up-regulated Key Proteins in Pseudomonas Aeruginosa for High-efficiency Petroleum Degradation by Proteomic Analysis.

    PubMed

    Wang, Jun-Di; Li, Xu-Xiang; Qu, Cheng-Tun

    2017-07-11

    In this work, proteomic analysis was used to identify the up-regulated key proteins of Pseudomonas aeruginosa (P6), a bacteria used in petroleum degradation, responsible for its high efficiency in degrading crude oil. Seventeen proteins were identified as up-regulated proteins by proteomic analysis and classified by bioinformatics analysis. The results indicated that most of the up-regulated proteins were responsible for P. aeruginosa (P6) survival under harsh environmental conditions and utilization crude oil as carbon source in a better way. The physiological processes, chemotaxis to carbon sources, terminal oxidation of carbons, carbon source uptake and nutrients transport, were associated with the up-regulated proteins in the study. The findings revealed the most influential proteins and set a clear direction for future research.

  7. Exploring Innovation Processes from a Complexity Perspective. Part II. Experiences from the Subsea Increased Oil Recovery Case

    ERIC Educational Resources Information Center

    Aasen, Tone Merethe Berg; Johannessen, Stig

    2007-01-01

    In this second part of the papers, exploring innovation processes from a complexity perspective, we present an empirical example to strengthen further the relevance of the approach. The example draws on a longitudinal research initiative conducted in cooperation with the Norwegian petroleum company Statoil ASA. We conducted our research into the…

  8. Exploring Innovation Processes from a Complexity Perspective. Part II. Experiences from the Subsea Increased Oil Recovery Case

    ERIC Educational Resources Information Center

    Aasen, Tone Merethe Berg; Johannessen, Stig

    2007-01-01

    In this second part of the papers, exploring innovation processes from a complexity perspective, we present an empirical example to strengthen further the relevance of the approach. The example draws on a longitudinal research initiative conducted in cooperation with the Norwegian petroleum company Statoil ASA. We conducted our research into the…

  9. Removal of ammonium ion from produced waters in petroleum offshore exploitation by a batch single-stage electrolytic process.

    PubMed

    de Lima, Rosilda Maria Gomes; da Silva Wildhagen, Glória Regina; da Cunha, José Waldemar Silva Dias; Afonso, Julio Carlos

    2009-01-30

    This work describes a batch single-stage electrochemical process to remove quantitatively the ammonium ion from produced waters from petroleum exploration of the Campos' Basin, seeking to fulfil the directories of the National Brazilian Environmental Council. The anode was made out of titanium covered by a layer of RuO(2)+TiO(2) oxides (Dimensionally Stable Anode), whereas the cathode was made out of pure titanium. Anodic and cathodic compartments were separated by a membrane. The applied current varied from 0.3 to 1.5A. As the current increased NH(4)(+) removal was faster and pH was rapidly decreased to 3. The pH of the anodic compartment increased to approximately 10. When the current was 0.92 A chlorine evolution was observed after 40 min or only 15 min when that current was 1.50 A. In this voltage a deposit containing alkali-earth metal hydroxides/sulphates was formed on the membrane surface of the cathode side, thus suggesting a diffusion process from the anodic to the cathodic compartment. The maximum current applied to the cell must not exceed approximately 0.70 A in order to avoid chlorine evolution. Ammonia removal was over 99.9 wt% at 0.68 A in about 75 min.

  10. Computer image processing in marine resource exploration

    NASA Technical Reports Server (NTRS)

    Paluzzi, P. R.; Normark, W. R.; Hess, G. R.; Hess, H. D.; Cruickshank, M. J.

    1976-01-01

    Pictographic data or imagery is commonly used in marine exploration. Pre-existing image processing techniques (software) similar to those used on imagery obtained from unmanned planetary exploration were used to improve marine photography and side-scan sonar imagery. Features and details not visible by conventional photo processing methods were enhanced by filtering and noise removal on selected deep-sea photographs. Information gained near the periphery of photographs allows improved interpretation and facilitates construction of bottom mosaics where overlapping frames are available. Similar processing techniques were applied to side-scan sonar imagery, including corrections for slant range distortion, and along-track scale changes. The use of digital data processing and storage techniques greatly extends the quantity of information that can be handled, stored, and processed.

  11. The Exploration and Evaluation of Petroleum Resource based on Remote Sensing Technology

    NASA Astrophysics Data System (ADS)

    Shengwei, Sun

    This paper presents a new method to detect and analyze the sea oil-gas percolation cause slicks offshore oil accumulation has been developed. This approach, using remote sensing radar technology and geophysical exploration technique is presented based on the oil-gas percolation theory. In this study, synthetic aperture radar data is the main data sources. These data all help set gravity data from satellite altimeter data, geophysical abnormal data from air magnetic data, oil prices, geological data and contain basin. By using the geographic information system, oil and gas accumulated promising region of the model. This method for the exploration and evaluation for offshore oil accumulation has been applied to two study area: China's sea basin mouth, pearl river basin. Through comparing the drilling results and relevant materials, our results show that the comprehensive application of this method is very effective.

  12. Terrigenous clastic depositional systems. Applications to petroleum, coal and uranium exploration

    SciTech Connect

    Galloway, W.E.; Hobday, D.K.

    1983-01-01

    Two experts in fundamental and applied sedimentology and sedimentary economic geology provide a state-of-the-art summary of clastic depositional environments and their associated mineral fuel deposits. Utilizing a multidisciplinary approach, the authors focus on the recognition, mapping, and three-dimensional reconstruction of clastic deposits, primarily from subsurface data, examine the hydrology of sedimentary basins, and discuss applications of genetic facies analysis to mineral fuel resource appraisal, exploration, and development.

  13. Petroleum supply monthly, February 1994

    SciTech Connect

    Not Available

    1994-03-01

    The Petroleum Supply Monthly presents data describing the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the US. The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders; operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. Data are divided into two sections: Summary statistics and Detailed statistics.

  14. Petroleum supply monthly, January 1994

    SciTech Connect

    Not Available

    1994-01-01

    Data presented describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States. The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States.

  15. Petroleum supply monthly

    SciTech Connect

    1995-10-01

    The Petroleum Supply Monthly (PSM) is one of a family of four publications produced by the Petroleum Supply Division within the Energy Information Administration (EIA) reflecting different levels of data timeliness and completeness. The other publications are the Weekly Petroleum Status Report (WPSR), the Winter Fuels Report, and the Petroleum Supply Annual (PSA). Data presented in the PSM describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blends, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States.

  16. Petroleum Supply Monthly

    SciTech Connect

    1996-02-01

    The Petroleum Supply Monthly (PSM) is one of a family of four publications produced by the Petroleum Supply Division within the Energy Information Administration (EIA) reflecting different levels of data timeliness and completeness. The other publications are the Weekly Petroleum Status Report (WPSR), the Winter Fuels Report, and the Petroleum Supply Annual (PSA). Data presented in the PSM describe the supply and disposition of petroleum products in the United States and major U.S. geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics.

  17. Exploration results and petroleum potential of Arctic shelf areas offshore Norway and USSR

    SciTech Connect

    Bergsager, E. )

    1990-05-01

    Exploration is in its very early stages in arctic shell areas offshore Norway and the Soviet Union. The first well was spudded in 1980 in the Norwegian Barents Sea and in 1982 in the Soviet Union. Giant discoveries of gas and significant oil discoveries have been made. The only production so far is that of oil onshore the island of Kolguyev. Reservoir rocks are clastic Triassic and the field has an offshore extension. Reservoir rocks with proven hydrocarbons are Permian carbonates, Triassic, Jurassic, and Lower Cretaceous clastic rocks. Widespread rich oil-prone source rocks have been demonstrated in Carboniferous, Triassic, and Jurassic rocks. Frequent registration of residual oil indicates that leakage, possibly related to young uplift might represent a risk factor. Successful exploration may be related to the understanding of the relation between the distribution of source rocks, their maturity and primary/secondary migration and young tectonic movement. Limited amounts of seismic and two to three wells have been drilled in the Kara Sea. In the Laptev and Eastern Siberian Sea farther to the east, no wells have been drilled and only limited seismic has been acquired.

  18. An Exploration of Design Students' Inspiration Process

    ERIC Educational Resources Information Center

    Dazkir, Sibel S.; Mower, Jennifer M.; Reddy-Best, Kelly L.; Pedersen, Elaine L.

    2013-01-01

    Our purpose was to explore how different sources of inspiration influenced two groups of students' inspiration process and their attitudes toward their design projects. Assigned sources of inspiration and instructor's assistance in the search for inspiration varied for two groups of students completing a small culture inspired product design…

  19. An Exploration of Design Students' Inspiration Process

    ERIC Educational Resources Information Center

    Dazkir, Sibel S.; Mower, Jennifer M.; Reddy-Best, Kelly L.; Pedersen, Elaine L.

    2013-01-01

    Our purpose was to explore how different sources of inspiration influenced two groups of students' inspiration process and their attitudes toward their design projects. Assigned sources of inspiration and instructor's assistance in the search for inspiration varied for two groups of students completing a small culture inspired product design…

  20. The USGS Side-Looking Airborne Radar (SLAR) program: CD-ROMs expand potential for petroleum exploration

    SciTech Connect

    Kover, A.N.; Schoonmaker, J.W. Jr.; Pohn. H.A. )

    1991-03-01

    The United States Geological Survey (USGS) began the systematic collection of Side-Looking Airborne Radar (SLAR) data in 1980. The SLAR image data, useful for many geologic applications including petroleum exploration, are compiled into mosaics using the USGS 1:250,000-scale topographic map series for format and control. Mosaics have been prepared for over 35% of the United States. Image data collected since 1985 are also available as computer compatible tapes (CCTs) for digital analysis. However, the use of tapes is often cumbersome. To make digital data more readily available for use on a microcomputer, the USGS has started to prepare compact discs-read only memory (CD-ROM). Several experimental discs have been compiled to demonstrate the utility of the medium to make available very large data sets. These discs include necessary nonproprietary software text, radar, and other image data. The SLAR images selected for these discs show significantly different geologic features and include the Long Valley caldera, a section of the San Andreas fault in the Monterey area, the Grand Canyon, and glaciers in southeastern Alaska. At present, several CD-ROMs are available as standard products distributed by the USGS EROS Data Center in Sioux Falls, South Dakota 57198. This is also the source for all USGS SLAR photographic and digital material.

  1. Direct determination of vanadium in high saline produced waters from offshore petroleum exploration by electrothermal atomic absorption spectrometry.

    PubMed

    Cassella, Ricardo J; Oliveira, Eliane P; Magalhães, Otto I B

    2006-03-15

    The present work reports the development of a methodology for the direct determination of vanadium in high saline waters derived from offshore petroleum exploration employing electrothermal atomic absorption spectrometry. Such waters, usually called produced waters, present complex composition containing various organic and inorganic substances. In order to attain best conditions (highest sensitivity besides lowest background) for the methodology, studies about the effects of several variables (evaluation of pyrolysis and atomization temperatures, type of chemical modifier, concentration of modifier and pyrolysis time) and the convenient calibration strategy were performed. Best conditions were reached with the addition of 10 microg of NH(4)H(2)PO(4) as chemical modifier employing pyrolysis (during 10s) and atomization temperatures of 1500 and 2700 degrees C, respectively. Obtained results indicated that, in this kind of sample, vanadium can be determined by standard addition method or employing an external calibration approach with standard solutions prepared in 0.8 mol l(-1) NaCl medium. In order to evaluate possible matrix interferences, a recovery test was performed with five spiked samples of produced waters. The limit of detection, limit of quantification and relative standard deviation in 0.8 mol l(-1) NaCl medium were also calculated and the derived values were 1.9 microg l(-1), 6.3 microg l(-1) and 5.6% (at 10 microg l(-1) level), respectively.

  2. Petroleum supply monthly, August 1993

    SciTech Connect

    Not Available

    1993-09-01

    This publication the Petroleum Supply Monthly (PSM) is one of a family of four publications produced by the Petroleum Supply Division within the Energy Information Administration (EIA) reflecting different levels of data timeliness and completeness. The other publications are the Weekly Petroleum Status Report, (WPSR), the Winter Fuels Report, and the Petroleum Supply Annual (PSA). Data presented describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. Data presented are divided into Summary Statistics and Detailed Statistics.

  3. Cenozoic tectonic evolution and petroleum exploration in Perl River Mouth basin, South China Sea

    SciTech Connect

    Chi Yukun; Xu Shice )

    1990-06-01

    The Pearl River Mouth basin is a large Cenozoic continental margin basin that is rich in hydrocarbon potential. Fluvial-lake sequences were deposited before Oligocene, but all were covered by Miocene marine clastic and carbonate rocks. Both paleo-Pearl River delta system and reef/bank carbonate system were widely developed. At the early stage of the evolution, two subsidence belts and one uplift between them distributed in NE regional direction; grabens occurred in the north belt and depressions in the south belt. Tectonic movement was stronger in the east than the west. The main production zones have been drilled both in Miocene sandstone and carbonate rocks. As the exploration activities are developing, the basin will be one of the most significant China offshore oil production areas.

  4. Petroleum coke adsorption as a water management option for oil sands process-affected water.

    PubMed

    Zubot, Warren; MacKinnon, Michael D; Chelme-Ayala, Pamela; Smith, Daniel W; Gamal El-Din, Mohamed

    2012-06-15

    Water is integral to both operational and environmental aspects of the oil sands industry. A water treatment option based on the use of petroleum coke (PC), a by-product of bitumen upgrading, was examined as an opportunity to reduce site oil sands process-affected water (OSPW) inventories and net raw water demand. Changes in OSPW quality when treated with PC included increments in pH levels and concentrations of vanadium, molybdenum, and sulphate. Constituents that decreased in concentration after PC adsorption included total acid-extractable organics (TAO), bicarbonate, calcium, barium, magnesium, and strontium. Changes in naphthenic acids (NAs) speciation were observed after PC adsorption. A battery of bioassays was used to measure the OSPW toxicity. The results indicated that untreated OSPW was toxic towards Vibrio fischeri and rainbow trout. However, OSPW treated with PC at appropriate dosages was not acutely toxic towards these test organisms. Removal of TAO was found to be an adsorption process, fitting the Langmuir and Langmuir-Freundlich isotherm models. For TAO concentrations of 60 mg/L, adsorption capacities ranged between 0.1 and 0.46 mg/g. This study demonstrates that freshly produced PC from fluid cokers provides an effective treatment of OSPW in terms of key constituents' removal and toxicity reduction.

  5. Utilization of the PHOSter {trademark} process to improve in situ bioremediation of petroleum hydrocarbons

    SciTech Connect

    Looney, B.B.; Easton, S.; Haselow, J.; Klemm, D.

    1996-12-31

    PHOSter{trademark} is a patented gas-phase nutrient delivery system that can be used to control the addition of vapor phase phosphorus and improve in situ bioremediation processes. PHOSter{trademark} can be easily and cost-effectively added to most existing biosparging or bioventing systems to provide the phosphorus that is often lacking for an optimally healthy microbial environment. Traditional approaches for adding phosphate to sites are based on addition of liquid fertilizer or phosphoric acid vapors. Such systems have been shown to influence very small areas and often result in overstimulation of the microbial population, which can lead to undesirable effects such as formation clogging. The PHOSter{trademark} system uses a relatively safe form of organic phosphate, triethylphosphate or TEP. TEP is added to an air injection stream by contacting or infusing the vapors from the liquid. With PHOSter{trademark}, the presence of the ethyl groups on the phosphate reduces the nutrient`s dissolution rate into water and provides a {open_quotes}time released{close_quotes} stimulation and prevents clogging, and because the phosphorus is in a gas form, it is more readily dispersed in the formation. PHOSter{trademark} has been successfully utilized in three states (South Carolina, Michigan, and New York) on petroleum hydrocarbon and trichloroethane contamination. A goal of a fourth test that is underway in Panama City, Florida at a gasoline distribution terminal is to improve the in situ remediation of BTEX and eliminate fugitive emissions from a multipoint airsparging process.

  6. Utilization of the PHOSter [trademark] process to improve in situ bioremediation of petroleum hydrocarbons

    SciTech Connect

    Looney, B.B. ); Easton, S. ); Haselow, J. ); Klemm, D. )

    1996-01-01

    PHOSter[trademark] is a patented gas-phase nutrient delivery system that can be used to control the addition of vapor phase phosphorus and improve in situ bioremediation processes. PHOSter[trademark] can be easily and cost-effectively added to most existing biosparging or bioventing systems to provide the phosphorus that is often lacking for an optimally healthy microbial environment. Traditional approaches for adding phosphate to sites are based on addition of liquid fertilizer or phosphoric acid vapors. Such systems have been shown to influence very small areas and often result in overstimulation of the microbial population, which can lead to undesirable effects such as formation clogging. The PHOSter[trademark] system uses a relatively safe form of organic phosphate, triethylphosphate or TEP. TEP is added to an air injection stream by contacting or infusing the vapors from the liquid. With PHOSter[trademark], the presence of the ethyl groups on the phosphate reduces the nutrient's dissolution rate into water and provides a [open quotes]time released[close quotes] stimulation and prevents clogging, and because the phosphorus is in a gas form, it is more readily dispersed in the formation. PHOSter[trademark] has been successfully utilized in three states (South Carolina, Michigan, and New York) on petroleum hydrocarbon and trichloroethane contamination. A goal of a fourth test that is underway in Panama City, Florida at a gasoline distribution terminal is to improve the in situ remediation of BTEX and eliminate fugitive emissions from a multipoint airsparging process.

  7. An evaluation of the suitability of ERTS data for the purposes of petroleum exploration

    NASA Technical Reports Server (NTRS)

    Collins, R. J., Jr. (Principal Investigator); Mccown, F. P.; Stonis, L. P.; Petzel, G.

    1973-01-01

    The author has identified the following significant results. ERTS-1 imagery seems to be good to excellent for reconnaissance level investigations of large sedimentary basins such as the Anadarko Basin. Many lithologic boundaries, and geomorphic features, and linear features inferred to be indicative of geologic structure are visible in the imagery. This imagery in conjunction with high altitude photography seems to be useful as a tool for intermediate level geologic exploration. Several types of crudely circular anomalous features, such as geomorphic/structural anomalies, hazy areas and tonal anomalies, are identifiable in the imagery. There seems to be a strong correlation between the geomorphic/structural and hazy anomalies and known structurally controlled oil and gas fields. The features recognizable on ERTS-1 imagery and their ease of recognition vary from area to area even in imagery acquired at the same time under essentially uniform atmospheric conditions. Repeated coverage is exceedingly valuable in geologic applications. One time complete coverage even for the various seasons does not reveal all the features that ERTS-1 can reveal.

  8. Uptake and trans-membrane transport of petroleum hydrocarbons by microorganisms.

    PubMed

    Hua, Fei; Wang, Hong Qi

    2014-03-04

    Petroleum-based products are a primary energy source in the industry and daily life. During the exploration, processing, transport and storage of petroleum and petroleum products, water or soil pollution occurs regularly. Biodegradation of the hydrocarbon pollutants by indigenous microorganisms is one of the primary mechanisms of removal of petroleum compounds from the environment. However, the physical contact between microorganisms and hydrophobic hydrocarbons limits the biodegradation rate. This paper presents an updated review of the petroleum hydrocarbon uptake and transport across the outer membrane of microorganisms with the help of outer membrane proteins.

  9. Principles of petroleum legislation: The case of a developing country

    SciTech Connect

    Al-Qasem, A.

    1985-01-01

    This book analyses the development of Petroleum Law in Libya, which enacted legislation over a period of years to cover all aspects of exploration and exploitation of Libya's oil. It gives an account of the stages through which the legislation passed and surveys the practical issues which influenced its development. Contents include: Part 1 General Provisions: 1 Ownership of Petroleum; 2 Administration; 3 Petroleum Zones; 4 Eligibility. Part 2 Exploration Permits: 5 Permits under the Minerals Law and; under the Petroleum Law. Part 3 The Concession: 6 Application and Grant; 7 Working Obligations; 8 Rights under Concessions; 9 Surrender, Assignment, and Termination; 10 Settlement of Disputes. Part 4 Financial Provisions: 11 Fees and Surface Rents; 12 The Royalty; 13 Taxation; 14 Posted Price; 15 Income; 16 Profits; 17 Payment and Measurement of Petroleum; Part 5 Libyanisation of the Industry: 18 Process of Libyanisation.

  10. Aerobic biodegradation process of petroleum and pathway of main compounds in water flooding well of Dagang oil field.

    PubMed

    Cai, Minmin; Yao, Jun; Yang, Huaijun; Wang, Ruixia; Masakorala, Kanaji

    2013-09-01

    Aerobic biodegradation of crude oil and its pathways were investigated via in vitro culture and GC-MS analysis in water flooding wells of Dagang oil field. The in vitro aerobic culture lasted 90 days when 99.0% of n-alkanes and 43.03-99.9% of PAHs were degraded and the biomarkers and their ratios were changed. The spectra of components in the residual oil showed the similar biodegradation between aerobic process of 90 days and degradation in reservoir which may last for some millions years, and the potential of serious aerobic biodegradation of petroleum in reservoir. 24 Metabolites compounds were separated and identified from aerobic culture, including fatty acid, naphthenic acid, aromatic carboxylic acid, unsaturated acid, alcohols, ketones and aldehydes. The pathways of alkanes and aromatics were proposed, which suggests that oxidation of hydrocarbon to organic acid is an important process in the aerobic biodegradation of petroleum. Copyright © 2013 Elsevier Ltd. All rights reserved.

  11. Application of high-temperature simulated distillation to the residuum oil supercritical extraction process in petroleum refining

    PubMed

    Raia; Villalanti; Subramanian; Williams

    2000-01-01

    The gas chromatographic method of high-temperature simulated distillation (HTSD) is described, and the results are presented for the application of HTSD to the characterization of petroleum refinery feed and products from solvent deasphalting operations. Results are presented for refinery residual feed, deasphalted oil, and asphaltene fractions from the residual oil supercritical extraction process. Asphaltene removal from petroleum residuum using solvent deasphalting results in the improved quality and high recovery of deasphalted oil product for use as lube oil, fluid catalytic cracking, or hydrocracker feedstocks. The HTSD procedure presented here proves valuable for characterizing the fractions from the deasphalting process to obtain the percentage yield with boiling point data over the range from approximately 36 degrees C (97 degrees F) to 733 degrees C (1352 degrees F), which covers the boiling range of n-paraffins of carbon number C5 to C108.

  12. Biological treatment process for removing petroleum hydrocarbons from oil field produced waters

    SciTech Connect

    Tellez, G.; Khandan, N.

    1995-12-31

    The feasibility of removing petroleum hydrocarbons from oil fields produced waters using biological treatment was evaluated under laboratory and field conditions. Based on previous laboratory studies, a field-scale prototype system was designed and operated over a period of four months. Two different sources of produced waters were tested in this field study under various continuous flow rates ranging from 375 1/D to 1,800 1/D. One source of produced water was an open storage pit; the other, a closed storage tank. The TDS concentrations of these sources exceeded 50,000 mg/l; total n-alkanes exceeded 100 mg/l; total petroleum hydrocarbons exceeded 125 mg/l; and total BTEX exceeded 3 mg/l. Removals of total n-alkanes, total petroleum hydrocarbons, and BTEX remained consistently high over 99%. During these tests, the energy costs averaged $0.20/bbl at 12 bbl/D.

  13. Exploring the Analytical Processes of Intelligence Analysts

    SciTech Connect

    Chin, George; Kuchar, Olga A.; Wolf, Katherine E.

    2009-04-04

    We present an observational case study in which we investigate and analyze the analytical processes of intelligence analysts. Participating analysts in the study carry out two scenarios where they organize and triage information, conduct intelligence analysis, report results, and collaborate with one another. Through a combination of artifact analyses, group interviews, and participant observations, we explore the space and boundaries in which intelligence analysts work and operate. We also assess the implications of our findings on the use and application of relevant information technologies.

  14. World petroleum supplies

    NASA Astrophysics Data System (ADS)

    Bell, Peter M.

    A number of conclusions by political conservatives about the fate of world petroleum supplies have been emerging lately. Among the most recent of them arose from discussions, held at the 1983 spring meeting of the American Association for the Advancement of Science (AAAS), which focused on the environment and resource study entitled “The Global 2000 Report” (New Scientist, June 9, 1983). Fred Singer, representing the Heritage Foundation of Washington, D.C., criticized the report, which predicted shortages in the near future, saying that the current world-wide oil glut will continue beyond the year 2000. Alternatives to the use of petroleum are a part of the cause. Singer argued that conservation, nuclear energy, and other petroleum substitutes will continue to suppress the demand for petroleum. In addition, according to other evaluations, exploration for petroleum and natural gas has not really begun.

  15. Examination of the Reelfoot Rift Petroleum System, south-central United States, and the elements that remain for potential exploration and development

    USGS Publications Warehouse

    Coleman, James; Pratt, Thomas L.

    2016-01-01

    No production has been established in the Reel-foot rift. However, at least nine of 22 exploratory wells have reported petroleum shows, mainly gas shows with some asphalt or solid hydrocarbon residue. Regional seismic profiling shows the presence of two large inversion structures (Blytheville arch and Pascola arch). The Blytheville arch is marked by a core of structurally thickened Elvins Shale, whereas the Pascola arch reflects the structural uplift of a portion of the entire rift basin. Structural uplift and faulting within the Reelfoot rift since the late Paleozoic appear to have disrupted older conventional hydrocarbon traps and likely spilled any potential conventional petroleum accumulations. The remaining potential resources within the Reelfoot rift are likely shale gas accumulations within the Elvins Shale; however, reservoir continuity and porosity as well as pervasive faulting appear to be significant future challenges for explorers and drillers.

  16. Upgrading petroleum and petroleum fractions

    SciTech Connect

    Ferguson, S.; Reese, D.D.

    1988-06-21

    A method is described for neutralizing the organic naphthenic acids acidity present in petroleum and petroleum fractions to produce a neutralization number less than 1.0 whereby they are rendered suitable as lube oil feed stocks which consists essentially of treating the petroleum and petroleum fractions with a neutralizing amount of monoethanolamine to form an amine salt with the organic acids and then heating the thus-neutralized petroleum and petroleum fractions at a temperature at least about 25/sup 0/F greater than the boiling point of water and for a time sufficient to convert the amine salts to amides.

  17. Exploring the possibility of a common structural model measuring associations between safety climate factors and safety behaviour in health care and the petroleum sectors.

    PubMed

    Olsen, Espen

    2010-09-01

    The aim of the present study was to explore the possibility of identifying general safety climate concepts in health care and petroleum sectors, as well as develop and test the possibility of a common cross-industrial structural model. Self-completion questionnaire surveys were administered in two organisations and sectors: (1) a large regional hospital in Norway that offers a wide range of hospital services, and (2) a large petroleum company that produces oil and gas worldwide. In total, 1919 and 1806 questionnaires were returned from the hospital and petroleum organisation, with response rates of 55 percent and 52 percent, respectively. Using a split sample procedure principal factor analysis and confirmatory factor analysis revealed six identical cross-industrial measurement concepts in independent samples-five measures of safety climate and one of safety behaviour. The factors' psychometric properties were explored with satisfactory internal consistency and concept validity. Thus, a common cross-industrial structural model was developed and tested using structural equation modelling (SEM). SEM revealed that a cross-industrial structural model could be identified among health care workers and offshore workers in the North Sea. The most significant contributing variables in the model testing stemmed from organisational management support for safety and supervisor/manager expectations and actions promoting safety. These variables indirectly enhanced safety behaviour (stop working in dangerous situations) through transitions and teamwork across units, and teamwork within units as well as learning, feedback, and improvement. Two new safety climate instruments were validated as part of the study: (1) Short Safety Climate Survey (SSCS) and (2) Hospital Survey on Patient Safety Culture-short (HSOPSC-short). Based on development of measurements and structural model assessment, this study supports the possibility of a common safety climate structural model across health

  18. Organic geochemistry of deep ground waters from the Palo Duro Basin, Texas: implications for radionuclide complexation, ground-water origin, and petroleum exploration

    SciTech Connect

    Means, J.L.; Hubbard, N.J.

    1985-05-01

    This report describes the organic geochemistry of 11 ground-water samples from the Palo Duro Basin, Texas and discusses the implications of their organic geochemical compositions in terms of radionuclide complexation, ground-water origin, and the petroleum potential of two candidate repository sites in Deaf Smith and Swisher Counties. Short-chain aliphatic acid anions are the principal organic constituents present. Stability constant data and simple chemical equilibria calculations suggest that short-chain aliphatic acids are relatively weak complexing agents. The extent of complexation of a typical actinide by selected inorganic ligands present in these brines is expected to far outweigh actinide complexation by the aliphatic acid anions. Various lines of evidence suggest that some portion of the bromide concentrations in the brines is derived from the same source as the short-chain aliphatic acid anions. When the postulated organic components are subtracted from total bromide concentrations, the origins of the Palo Duro brines, based on chloride versus bromide relationships, appear largely consistent with origins based on isotopic evidence. The short-chain aliphatic acid anion content of the Palo Duro brines is postulated to have been much greater in the geologic past. Aliphatic acid anions are but one of numerous petroleum proximity indicators, which consistently suggest a greater petroleum exploration potential for the area surrounding the Swisher County site than the region encompassing the candidate site in Deaf Smith County. Short-chain aliphatic acid anions appear to provide a useful petroleum exploration tool as long as the complex reactions that may dimish their concentrations in ground water are recognized. 71 refs., 10 figs., 10 tabs.

  19. Bench scale studies of the soil aeration process for bioremediation of petroleum hydrocarbons

    SciTech Connect

    Hinchee, R.E.; Arthur, M.

    1991-12-31

    An alternative to traditional hydrocarbon bioremediation is to pump air through unsaturated soils to create aerobic conditions and induce biodegradation. This study examines the effects of moisture and nutrient augmentation on biodegradation of petroleum hydrocarbons in aerated soils. Findings indicate that forced aeration, coupled with additions of nutrients and moisture, stimulate hydrocarbon-degrading microorganisms and present a feasible approach to bioremediation management.

  20. Statistics of petroleum exploration in the Caribbean, Latin America, Western Europe, the Middle East, Africa, non-communist Asia, and the southwestern Pacific

    USGS Publications Warehouse

    Attanasi, E.D.; Root, David H.

    1993-01-01

    This circular presents a summary of the geographic location, amount, and results of petroleum exploration, including an atlas showing explored and delineated prospective areas through 1990. The data show that wildcat well drilling has continued through the last decade to expand the prospective area by about 40,000 to 50,000 square miles per year. However, the area delineated by 1970, which represents only about one-third of the prospective area delineated to date, contains about 80 percent of the oil discovered to date. This discovery distribution suggests that, from an overall prospective, the industry was successful in delineating the most productive areas early. The price increases of the 1970's and 1980's allowed the commercial exploration and development of fields in high-cost areas, such as the North Sea and Campos Basin, Brazil. Data on natural-gas discoveries also indicate that gas will be supplying an increasing share of the worldwide energy market. The size distribution of petroleum provinces is highly skewed. The skewed distribution and the stability in province size orderings suggest that intense exploration in identified provinces will not change the distribution of oil within the study area. Although evidence of the field-growth phenomenon outside the United States and Canada is presented, the data are not yet reliable enough for projecting future growth. The field-growth phenomenon implies not only that recent discoveries are substantially understated, but that field growth could become the dominant source of additions to proved reserves in the future.

  1. Petroleum supply monthly, July 1993

    SciTech Connect

    Not Available

    1993-07-29

    Data presented in the Petroleum Supply Monthly (PSM) describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: Petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States.

  2. Petroleum supply monthly, August 1994

    SciTech Connect

    Not Available

    1994-08-26

    Data presented in the Petroleum Supply Monthly (PSM) describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics.

  3. Marine Oil-Degrading Microorganisms and Biodegradation Process of Petroleum Hydrocarbon in Marine Environments: A Review.

    PubMed

    Xue, Jianliang; Yu, Yang; Bai, Yu; Wang, Liping; Wu, Yanan

    2015-08-01

    Due to the toxicity of petroleum compounds, the increasing accidents of marine oil spills/leakages have had a significant impact on our environment. Recently, different remedial techniques for the treatment of marine petroleum pollution have been proposed, such as bioremediation, controlled burning, skimming, and solidifying. (Hedlund and Staley in Int J Syst Evol Microbiol 51:61-66, 2001). This review introduces an important remedial method for marine oil pollution treatment-bioremediation technique-which is considered as a reliable, efficient, cost-effective, and eco-friendly method. First, the necessity of bioremediation for marine oil pollution was discussed. Second, this paper discussed the species of oil-degrading microorganisms, degradation pathways and mechanisms, the degradation rate and reaction model, and the factors affecting the degradation. Last, several suggestions for the further research in the field of marine oil spill bioremediation were proposed.

  4. Hungary's petroleum refineries: A review of energy usage, environmental, and processing issues. Phase 2 final report. Export trade information

    SciTech Connect

    Not Available

    1991-08-01

    The U.S. Agency for International Development (USAID) developed a program designed to assist Hungary in improving operating efficiency, energy conservation, and environmental control in its petroleum refinery sector. The volume reviews operating and planning issues in processing, energy, and environment. The primary focus of the effort was to identify changes in operating practices and equipment modifications that could be implemented in the near-term to increase the overall operating efficiency of the effort, reduce energy usage, and reduce the level of pollutants from Hungary's two largest operating refineries. In addition, it identifies areas for potential longer-term capital improvement projects. Finally, operating and planning issues were also reviewed.

  5. Petroleum supply monthly, April 1990

    SciTech Connect

    1990-06-26

    The Petroleum Supply Monthly (PSM) is one of a family of three publications produced by the Petroleum Supply Division within the Energy Information Administration (EIA) reflecting different levels of data timeliness and completeness. The other two publications are the Weekly Petroleum Status Report (WPSR) and the Petroleum Supply Annual (PSA). Data presented in the Petroleum Supply Monthly describe (PSM) the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in Primary Supply.'' Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States. Data presented in the PSM are divided into two sections: (1) the Summary Statistics and (2) the Detailed Statistics.

  6. Inhibition of retrogressive reactions in coal/petroleum co-processing: Quarterly technical progress report, 1 December 1988--28 February 1989

    SciTech Connect

    Schobert, H. H.; Tomic, J.

    1989-03-01

    The overall objective of this project is to develop a fundamental understanding of the reactions occurring at the onset of coke formation during the co-processing of coals with petroleum residua. The specific objectives include the examination of chemical components, or groups of components, in coals and petroleum feedstocks to quantify and rank the effects of these components on retardation or enhancement of coke formation. The work involves bench scale reactions in microautoclaves, supplemented by optical microscopy of carbonaceous residues and instrumental analyses such as FTIR and /sup 13/C NMR. During this reporting period the objectives of the work were to obtain baseline FTIR and /sup 13/C NMR spectra of the coals to be used in the project, and to obtain samples of petroleum residua for use in the project. It was also intended to begin separation of the petroleum residua by sequential elution by solvents chromatography (SESC).

  7. Naphthenic acids speciation and removal during petroleum-coke adsorption and ozonation of oil sands process-affected water.

    PubMed

    Gamal El-Din, Mohamed; Fu, Hongjing; Wang, Nan; Chelme-Ayala, Pamela; Pérez-Estrada, Leonidas; Drzewicz, Przemysław; Martin, Jonathan W; Zubot, Warren; Smith, Daniel W

    2011-11-01

    The Athabasca Oil Sands industry produces large volumes of oil sands process-affected water (OSPW) as a result of bitumen extraction and upgrading processes. Constituents of OSPW include chloride, naphthenic acids (NAs), aromatic hydrocarbons, and trace heavy metals, among other inorganic and organic compounds. To address the environmental issues associated with the recycling and/or safe return of OSPW into the environment, water treatment technologies are required. This study examined, for the first time, the impacts of pretreatment steps, including filtration and petroleum-coke adsorption, on ozonation requirements and performance. The effect of the initial OSPW pH on treatment performance, and the evolution of ozonation and its impact on OSPW toxicity and biodegradability were also examined. The degradation of more than 76% of total acid-extractable organics was achieved using a semi-batch ozonation system at a utilized ozone dose of 150 mg/L. With a utilized ozone dose of 100 mg/L, the treated OSPW became more biodegradable and showed no toxicity towards Vibrio fischeri. Changes in the NA profiles in terms of carbon number and number of rings were observed after ozonation. The filtration of the OSPW did not improve the ozonation performance. Petroleum-coke adsorption was found to be effective in reducing total acid-extractable organics by a 91%, NA content by an 84%, and OSPW toxicity from 4.3 to 1.1 toxicity units. The results of this study indicate that the combination of petroleum-coke adsorption and ozonation is a promising treatment approach to treat OSPW. Copyright © 2011 Elsevier B.V. All rights reserved.

  8. Tectonosedimentary framework of Upper Cretaceous -Neogene series in the Gulf of Tunis inferred from subsurface data: implications for petroleum exploration

    NASA Astrophysics Data System (ADS)

    Dhraief, Wissem; Dhahri, Ferid; Chalwati, Imen; Boukadi, Noureddine

    2017-04-01

    The objective and the main contribution of this issue are dedicated to using subsurface data to delineate a basin beneath the Gulf of Tunis and its neighbouring areas, and to investigate the potential of this area in terms of hydrocarbon resources. Available well data provided information about the subsurface geology beneath the Gulf of Tunis. 2D seismic data allowed delineation of the basin shape, strata geometries, and some potential promising subsurface structures in terms of hydrocarbon accumulation. Together with lithostratigraphic data obtained from drilled wells, seismic data permitted the construction of isochron and isobath maps of Upper Cretaceous-Neogene strata. Structural and lithostratigraphic interpretations indicate that the area is tectonically complex, and they highlight the tectonic control of strata deposition during the Cretaceous and Neogene. Tectonic activity related to the geodynamic evolution of the northern African margin appears to have been responsible for several thickness and facies variations, and to have played a significant role in the establishment and evolution of petroleum systems in northeastern Tunisia. As for petroleum systems in the basin, the Cretaceous series of the Bahloul, Mouelha and Fahdene formations are acknowledged to be the main source rocks. In addition, potential reservoirs (Fractured Abiod and Bou Dabbous carbonated formations) sealed by shaly and marly formations (Haria and Souar formations respectively) show favourable geometries of trap structures (anticlines, tilted blocks, unconformities, etc.) which make this area adequate for hydrocarbon accumulations.

  9. Petroleum Supply Monthly, July 1990

    SciTech Connect

    Not Available

    1990-09-28

    Data presented in the PSM describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 states and the District of Columbia). The reporting universe includes those petroleum sectors in Primary Supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States.

  10. Removal of petroleum hydrocarbons from contaminated groundwater by the combined technique of adsorption onto perlite followed by the O3/H2O2 process.

    PubMed

    Moussavi, Gholamreza; Bagheri, Amir

    2012-09-01

    Groundwater contaminated with petroleum hydrocarbons was treated using a combined system of adsorption onto powdered expanded perlite (PEP) followed by the O3/H2O2 process. The pretreatment investigations indicated a high capacity for PEP to remove petroleum hydrocarbons from the contaminated water. An experimental total petroleum hydrocarbon (TPH) adsorption capacity of 275 mg/g PEP was obtained at the natural pH of water. The experimental data fit best with the Freundlich isotherm model and pseudo-second-order adsorption model. The second phase of the experiment evaluated the performance of the O3/H2O2 process in the removal of residual TPH from pretreated water and compared the results with that of raw water. The O3/H202 process attained a maximum TPH removal rate for the pretreated water after 70 min, when 93% of the residual TPH in the effluent of the adsorption system was removed. Overall, the combination of adsorption onto PEP for 100 min and the subsequent treatment with the O3/H2O2 process for 70min eliminated over 99% of the TPH of highly petroleum-contaminated groundwater, with initial values of 162 mg/L. Therefore, we can conclude that the developed treatment system is an appropriate method of remediation for petroleum-contaminated waters.

  11. A systematic process for adaptive concept exploration

    NASA Astrophysics Data System (ADS)

    Nixon, Janel Nicole

    several common challenges to the creation of quantitative modeling and simulation environments. Namely, a greater number of alternative solutions imply a greater number of design variables as well as larger ranges on those variables. This translates to a high-dimension combinatorial problem. As the size and dimensionality of the solution space gets larger, the number of physically impossible solutions within that space greatly increases. Thus, the ratio of feasible design space to infeasible space decreases, making it much harder to not only obtain a good quantitative sample of the space, but to also make sense of that data. This is especially the case in the early stages of design, where it is not practical to dedicate a great deal of resources to performing thorough, high-fidelity analyses on all the potential solutions. To make quantitative analyses feasible in these early stages of design, a method is needed that allows for a relatively sparse set of information to be collected quickly and efficiently, and yet, that information needs to be meaningful enough with which to base a decision. The method developed to address this need uses a Systematic Process for Adaptive Concept Exploration (SPACE). In the SPACE method, design space exploration occurs in a sequential fashion; as data is acquired, the sampling scheme adapts to the specific problem at hand. Previously gathered data is used to make inferences about the nature of the problem so that future samples can be taken from the more interesting portions of the design space. Furthermore, the SPACE method identifies those analyses that have significant impacts on the relationships being modeled, so that effort can be focused on acquiring only the most pertinent information. The SPACE method uses a four-part sampling scheme to efficiently uncover the parametric relationships between the design variables and responses. Step 1 aims to identify the location of infeasible space within the region of interest using an initial

  12. Petroleum-processing projects in Venezuela: Definitional-Mission report. Export trade information

    SciTech Connect

    Grady, R.B.; Shrivastava, V.K.

    1992-02-01

    The U.S. Trade and Development Program (TDP) contracted a Definitional Mission to evaluate the prospects of TDP funding feasibility studies of three petroleum refining projects for Maraven, an integrated oil subsidiary of Petroleos de Venezuela, S.A. (PDVSA). Maraven has requested TDP support for feasibility studies of the following projects: Zuata (Orinoco Belt) Extra Heavy Crude Upgrading, Boscan Heavy Crude Gasification Complex, and High Quality Lube Oil Base Manufacting Project. The ratio of U.S. export potential to the cost of the feasibility studies is very high (350:1 for the lube project to 1600:1 for the heavy crude projects). Even assuming relatively low probabilities of timely implementation, the projects meet TDP potential export benefit/cost requirements. Therefore, the study recommends that TDP support all three projects at a level of 50 percent of the estimated cost.

  13. Petroleum supply monthly, October 1993

    SciTech Connect

    Not Available

    1993-10-26

    The Petroleum Supply Monthly (PSM) is one of a family of four publications produced by the Petroleum Supply Division within the Energy Information Administration (EIA) reflecting different levels of data timeliness and completeness. The other publications are the Weekly Petroleum Status Report (WPSR), the Winter Fuels Report, and the Petroleum Supply Annual (PSA). Data presented in the PSM describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics.

  14. Petroleum supply monthly, September 1991

    SciTech Connect

    Not Available

    1991-09-30

    The Petroleum Supply Monthly (PSM) is one of a family of three publications produced by the Petroleum Supply Division within the Energy Information Administration (EIA) reflecting different levels of data timeliness and completeness. The other two publications are the Weekly Petroleum Status Report (WPSR) and the Petroleum Supply Annual (PSA). Data presented in PSM describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administrations for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 states and the District of Columbia). The reporting universe includes those petroleum sectors in Primary Supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States. Data presented in the PSM are divided into two sections (1) the Summary Statistics and (2) the Detailed Statistics. 65 tabs.

  15. Petroleum supply monthly, May 1994

    SciTech Connect

    Not Available

    1994-05-27

    The Petroleum Supply Monthly (PSM) is one of a family of four publications produced by the Petroleum Supply Division within the Energy Information Administration (EIA) reflecting different levels of data timeliness and completeness. The other publications are the Weekly Petroleum Status Report (WPSR), the Winter Fuels Report, and the Petroleum supply annual (PSA). Data presented in the PSM describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics.

  16. Petroleum Supply Monthly, August 1990

    SciTech Connect

    Not Available

    1990-10-30

    The Petroleum Supply Monthly (PSM) is one of a family of three publications produced by the Petroleum Supply Division within the Energy Information administration (EIA) reflecting different levels of data timeliness and completeness. The other two publications are the Weekly Petroleum Status Report (WPSR) and the Petroleum Supply Annual (PSA). Data presented in the PSM describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) district movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in Primary Supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States. Data presented in the PSM are divided into two sections (1) the Summary Statistics and (2) the Detailed Statistics.

  17. Petroleum supply monthly, July 1994

    SciTech Connect

    Not Available

    1994-07-26

    The Petroleum Supply Monthly (PSM) is one of a family of four publications produced by the Petroleum Supply Division within the Energy Information Administration (EIA) reflecting different levels of data timeliness and completeness. The other publications are the Weekly Petroleum Status Report (WPSR), the Winter Fuels Report, and the Petroleum Supply Annual (PSA). Data presented in the PSM describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics.

  18. Petroleum supply monthly, June 1994

    SciTech Connect

    Not Available

    1994-06-28

    The Petroleum Supply Monthly (PSM) is one of a family of four publications produced by the Petroleum Supply Division within the Energy Information Administration (EIA) reflecting different levels of data timeliness and completeness. The other publications are the Weekly Petroleum Status Report (WPSR), the Winter Fuels Report, and the Petroleum Supply Annual (PSA). Data presented in the PSM describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics.

  19. Petroleum supply monthly, January 1996

    SciTech Connect

    1996-02-15

    The Petroleum Supply Monthly (PSM) is one of a family of four publications produced by the Petroleum Supply Division within the Energy Information Administration (EIA) reflecting different levels of data timeliness and completeness. The other publications are the Weekly Petroleum Status Report (WPSR), the Winter Fuels Report, and the Petroleum Supply Annual (PSA). Data presented in the PSM describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics.

  20. Dynamic processes of indigenous microorganisms from a low-temperature petroleum reservoir during nutrient stimulation.

    PubMed

    Gao, Pei-Ke; Li, Guo-Qiang; Zhao, Ling-Xia; Dai, Xue-Cheng; Tian, Hui-Mei; Dai, Liu-Bing; Wang, Hong-Bo; Huang, Hai-Dong; Chen, Yue-Hua; Ma, Ting

    2014-02-01

    Compared to medium-high temperature petroleum reservoirs (30°C-73°C), little is known about microbial regulation by nutrients in low-temperature reservoirs. In this study, we report the performance (oil emulsification and biogas production) and community structure of indigenous microorganisms from a low-temperature (22.6°C) petroleum reservoir during nutrient stimulation. Culture-dependent approaches indicated that the number of hydrocarbon-oxidizing bacteria (HOB), nitrate-reducing bacteria (NRB) and methane-producing bacteria (MPB) increased by between 10- and 1000-fold, while sulfate-reducing bacteria (SRB) were observed at low levels during stimulation. Phylogenetic analysis of the 16S rRNA gene indicated that Pseudomonas, Ochrobactrum, Acinetobacter, Halomonas and Marinobacter, which have the capability to produce surfactants, were selectively enriched. Methanoculleus, Methanosaeta, Methanocorpusculum and Methanocalculus showed the largest increase in relative abundance among archaea. Micro-emulsion formed with an average oil droplet diameter of 14.3 μm (ranging between 4.1 μm and 84.2 μm) during stimulation. Gas chromatographic analysis of gas production (186 mL gas/200 mL medium) showed the levels of CO2 and CH4 increased 8.97% and 6.21%, respectively. Similar to medium-high temperature reservoirs, HOB, NRB, SRB and MPB were ubiquitous in the low-temperature reservoir, and oil emulsification and gas production were the main phenomena observed during stimulation. Oil emulsification required a longer duration of time to occur in the low-temperature reservoir. Copyright © 2013 The Society for Biotechnology, Japan. Published by Elsevier B.V. All rights reserved.

  1. Exploring the Composing Process with Microcomputers.

    ERIC Educational Resources Information Center

    Combs, Martha

    As a result of a telephone survey of 100 experienced elementary and secondary teachers concerning their comfort with computers and the teaching of writing skills, a weekend workshop was designed to help teachers develop some confidence in their skill as writers and to explore the possibilities available when writing with a word processor. The…

  2. Exploring the Composing Process with Microcomputers.

    ERIC Educational Resources Information Center

    Combs, Martha

    As a result of a telephone survey of 100 experienced elementary and secondary teachers concerning their comfort with computers and the teaching of writing skills, a weekend workshop was designed to help teachers develop some confidence in their skill as writers and to explore the possibilities available when writing with a word processor. The…

  3. Vegetable oils as a petroleum replacement

    USDA-ARS?s Scientific Manuscript database

    The current dependence of the world economy on petroleum cannot be sustained in the long run. Petroleum is expected to be depleted in the foreseeable future. In addition, the use of petroleum causes carbon dioxide emissions leading to global warming. Renewable sources need to be explored. One of the...

  4. Benthos response following petroleum exploration in the southern Caspian Sea: Relating effects of nonaqueous drilling fluid, water depth, and dissolved oxygen.

    PubMed

    Tait, R D; Maxon, C L; Parr, T D; Newton, F C

    2016-09-15

    The effects of linear alpha olefin (LAO) nonaqueous drilling fluid on benthic macrofauna were assessed over a six year period at a southern Caspian Sea petroleum exploration site. A wide-ranging, pre-drilling survey identified a relatively diverse shelf-depth macrofauna numerically dominated by amphipods, cumaceans, and gastropods that transitioned to a less diverse assemblage dominated by hypoxia-tolerant annelid worms and motile ostracods with increasing depth. After drilling, a similar transition in macrofauna assemblage was observed with increasing concentration of LAO proximate to the shelf-depth well site. Post-drilling results were consistent with a hypothesis of hypoxia from microbial degradation of LAO, supported by the presence of bacterial mats and lack of oxygen penetration in surface sediment. Chemical and biological recoveries at ≥200m distance from the well site were evident 33months after drilling ceased. Our findings show the importance of monitoring recovery over time and understanding macrofauna community structure prior to drilling.

  5. The Second Colloquium on Petroleum Engineering Education

    SciTech Connect

    Willhite, G.P.; Forney, R.H.

    1993-11-30

    This paper describes findings from the Second Colloquium on Petroleum engineering Education. The purpose of this colloquium was to provide a forum for petroleum engineering educators and representatives from industry and government to explore critical issues facing petroleum engineering education as we move into the 21st Century. It was expected that the colloquium would identify areas where changes are needed in petroleum engineering education, to best prepare students for careers in the oil and gas industry or other, related industries.

  6. Jurassic sequence stratigraphy in Mississippi interior salt basin: an aid to petroleum exploration in eastern Gulf of Mexico area

    SciTech Connect

    Mancini, E.A.; Mink, R.M.; Tew, B.H.

    1988-02-01

    An understanding of sequence stratigraphy of Jurassic units in onshore basins can serve as an aid to identify potential petroleum reservoir and source rocks in the eastern Gulf of Mexico area. Three depositional sequences associated with cycles of eustatic sea level change and coastal onlap have been identified in the Mississippi Interior Salt basin. Three depositional sequences probably correspond to the J2.4, J3.1, and J3.2 sequences of Vail et al for Callovian through Kimmeridgian strata. In the Mississippi Interior salt basin, the lower depositional sequence is bounded by a basal type 2 unconformity and an upper type 2 unconformity in the Callovian. This sequence includes Louann evaporites (transgressive), Pine Hill anhydrites and shales (condensed section), and Norphlet eolian sandstones (highstand regressive). The middle depositional sequence reflects relative sea level rise in the late Callovian. This sequence includes Norphlet marine sandstones and lower Smackover packstones and mudstones (transgressive), middle Smackover mudstones (condensed section), and upper Smackover grainstones and anhydrites (highstand regressive).

  7. Basic petroleum geology, 2nd ed. , revised

    SciTech Connect

    Link.

    1990-01-01

    This book contains revised and updated material, including approximately 200 additional illustrations and an extensive glossary of terms. A valuable reference for geology students and petroleum professionals, the text presents fundamental concepts of geology in terms of sedimentary deposition, petroleum occurrence, exploration, and recovery. This book contains information on geologic time, historical geology and stratigraphy; Minerals and rocks; Weathering erosion, and deposition; Marine erosion and deposition; Depositional basins; Lacustrine, desert and glacial environments; Subsurface water and diagenesis; Structural geology; petroleum traps; Petroleum and reservoirs; Geological considerations and engineering practices; Rocks, reservoirs, and recovery techniques; Exploration techniques for petroleum; Bibliography Glossary; Index.

  8. Getting Started: Curriculum Exploration Process Introduction

    ERIC Educational Resources Information Center

    Powell, Gwynn M.

    2013-01-01

    This mini-article describes a faculty meeting process used for curriculum planning. The proffered outline helped us document and assess our program, to focus our conversation, to envision where we wanted students to be, and to share across the curriculum what was happening in our solitary courses. The results prompted us to share with each other…

  9. Process Drama Explorations to Support "Macbeth."

    ERIC Educational Resources Information Center

    Anderson, Jared; Barrera, Gregory; Benedict, Julie; Cavanaugh, Michael; Christensen, Jessica; Clark, Susannah; Dallimore, Natalie; Drown, Danielle; Fink, Susan; Hansen, Josh; Haubner, Ashley; Hinsdale, Robin; Johnson, Tyler; King, JuLee; Maufort, Brenda; Neubauer, Laura; Popple, Jennifer; Praggastis, Cate; Price, Matt; Raber, Lloyd; Rowland, Tiffany; Strite-Hatch, Amy; Torson, Christine; Tuckness, Tara

    2003-01-01

    Explains that each year, theatre education majors at the University of Utah select a production that will be mounted by a professional theatre company on the campus. Explains that the theatre education majors complete extensive dramaturgical research for the production, and create a process drama pre-show piece that is presented to over 1500 K-12…

  10. Process Drama Explorations to Support "Macbeth."

    ERIC Educational Resources Information Center

    Anderson, Jared; Barrera, Gregory; Benedict, Julie; Cavanaugh, Michael; Christensen, Jessica; Clark, Susannah; Dallimore, Natalie; Drown, Danielle; Fink, Susan; Hansen, Josh; Haubner, Ashley; Hinsdale, Robin; Johnson, Tyler; King, JuLee; Maufort, Brenda; Neubauer, Laura; Popple, Jennifer; Praggastis, Cate; Price, Matt; Raber, Lloyd; Rowland, Tiffany; Strite-Hatch, Amy; Torson, Christine; Tuckness, Tara

    2003-01-01

    Explains that each year, theatre education majors at the University of Utah select a production that will be mounted by a professional theatre company on the campus. Explains that the theatre education majors complete extensive dramaturgical research for the production, and create a process drama pre-show piece that is presented to over 1500 K-12…

  11. Experiences of a Multidisciplinary Course on Geo-Signal Processing from a DSP Perspective Offered in Electrical Engineering at King Fahd University of Petroleum and Minerals

    ERIC Educational Resources Information Center

    Mousa, W. A.

    2012-01-01

    The purpose of this paper is to share the experience gained in, and the efforts made toward, introducing and implementing a new course in the challenging and important area of geophysical signal processing at the Electrical Engineering (EE) Department, King Fahd University of Petroleum and Minerals (KFUPM), Dhahran, Saudi Arabia. The new course,…

  12. Experiences of a Multidisciplinary Course on Geo-Signal Processing from a DSP Perspective Offered in Electrical Engineering at King Fahd University of Petroleum and Minerals

    ERIC Educational Resources Information Center

    Mousa, W. A.

    2012-01-01

    The purpose of this paper is to share the experience gained in, and the efforts made toward, introducing and implementing a new course in the challenging and important area of geophysical signal processing at the Electrical Engineering (EE) Department, King Fahd University of Petroleum and Minerals (KFUPM), Dhahran, Saudi Arabia. The new course,…

  13. Exploring groundwater processes in Rocky Mountain headwaters

    NASA Astrophysics Data System (ADS)

    Janzen, D.; Ireson, A. M.; Yassin, F. A.

    2014-12-01

    More than one-sixth of the Earth's human population relies on freshwater originating in mountain headwaters, which is understood to be generated largely from snowpacks that melt throughout the spring and summer. Annual hydrographs in these regions are characterized by large peaks occurring in the spring, followed by slow recession towards winter baseflow conditions. However, atmospheric warming trends are found to coincide with earlier periods of snowmelt, leading to increased flows in spring and decreased flows in summer. This decreased ability of our 'water towers' to store snow late into the summer suggests that other mechanisms of storage and release may become more important in sustaining baseflows. In particular, subsurface processes leading to late summer and winter flow will become increasingly important earlier on, but are as yet poorly understood. By utilising historical data to inform a better understanding of late-season subsurface processes, we will be better prepared to predict how these mountains will temporarily store and release groundwater in a warmer climate. Here, we analyse long-term data sets from a small (Marmot Creek, Alberta ~10 km2) and a large (Bow River at Banff, Alberta ~1000 km2) basinwithin the Canadian Rocky Mountains, comparing observations with model outputs, to investigate late-season hydrological responses, and particularly the role of groundwater as a temporary storage mechanism.

  14. Environmental Benefit Assessment for the Carbonation Process of Petroleum Coke Fly Ash in a Rotating Packed Bed.

    PubMed

    Pei, Si-Lu; Pan, Shu-Yuan; Li, Ye-Mei; Chiang, Pen-Chi

    2017-09-19

    A high-gravity carbonation process was deployed at a petrochemical plant using petroleum coke fly ash and blowdown wastewater to simultaneously mineralized CO2 and remove nitrogen oxides and particulate matters from the flue gas. With a high-gravity carbonation process, the CO2 removal efficiency was found to be 95.6%, corresponding to a capture capacity of 600 kg CO2 per day, at a gas flow rate of 1.47 m(3)/min under ambient temperature and pressure. Moreover, the removal efficiency of nitrogen oxides and particulate matters was 99.1% and 83.2%, respectively. After carbonation, the reacted fly ash was further utilized as supplementary cementitious materials in the blended cement mortar. The results indicated that cement with carbonated fly ash exhibited superior compressive strength (38.1 ± 2.5 MPa at 28 days in 5% substitution ratio) compared to the cement with fresh fly ash. Furthermore, the environmental benefits for the high-gravity carbonation process using fly ash were critically assessed. The energy consumption of the entire high-gravity carbonation ranged from 80 to 169 kWh/t-CO2 (0.29-0.61 GJ/t-CO2). Compared with the scenarios of business-as-usual and conventional carbon capture and storage plant, the economic benefit from the high-gravity carbonation process was approximately 90 and 74 USD per ton of CO2 fixation, respectively.

  15. Exploring scalar field dynamics with Gaussian processes

    SciTech Connect

    Nair, Remya; Jhingan, Sanjay; Jain, Deepak E-mail: sanjay.jhingan@gmail.com

    2014-01-01

    The origin of the accelerated expansion of the Universe remains an unsolved mystery in Cosmology. In this work we consider a spatially flat Friedmann-Robertson-Walker (FRW) Universe with non-relativistic matter and a single scalar field contributing to the energy density of the Universe. Properties of this scalar field, like potential, kinetic energy, equation of state etc. are reconstructed from Supernovae and BAO data using Gaussian processes. We also reconstruct energy conditions and kinematic variables of expansion, such as the jerk and the slow roll parameter. We find that the reconstructed scalar field variables and the kinematic quantities are consistent with a flat ΛCDM Universe. Further, we find that the null energy condition is satisfied for the redshift range of the Supernovae data considered in the paper, but the strong energy condition is violated.

  16. Exploring the neural substrates of misinformation processing.

    PubMed

    Gordon, Andrew; Brooks, Jonathan C W; Quadflieg, Susanne; Ecker, Ullrich K H; Lewandowsky, Stephan

    2017-10-04

    It is well known that information that is initially thought to be correct but then revealed to be false, often continues to influence human judgement and decision making despite people being aware of the retraction. Yet little research has examined the underlying neural substrates of this phenomenon, which is known as the 'continued influence effect of misinformation' (CIEM). It remains unclear how the human brain processes critical information that retracts prior claims. To address this question in further detail, 26 healthy adults underwent functional magnetic resonance imaging (fMRI) while listening to brief narratives which either involved a retraction of prior information or not. Following each narrative, subjects' comprehension of the narrative, including their inclination to rely on retracted information, was probed. As expected, it was found that retracted information continued to affect participants' narrative-related reasoning. In addition, the fMRI data indicated that the continued influence of retracted information may be due to a breakdown of narrative-level integration and coherence-building mechanisms implemented by the precuneus and posterior cingulate gyrus. Copyright © 2017. Published by Elsevier Ltd.

  17. Plant-microbial association in petroleum and gas exploration sites in the state of Assam, north-east India-significance for bioremediation.

    PubMed

    Sarma, Hemen; Islam, N F; Prasad, M N V

    2017-03-01

    The state of Assam in north-east India gained popularity in Asia because of discovery of oil. Pollution due to petroleum and gas exploration is a serious problem in Assam. Oil and gas exploration by various agencies in Assam resulted in soil pollution due to hydrocarbons (HCs) and heavy metals (HMs). Bioremediation gained considerable significance in addressing petroleum hydrocarbon polluted sites in various parts of the world. In this investigation, we have observed 15 species of plants belonging to grass growing on the contaminated soils. Among 15 species of grasses, 10 species with high important value index (IVI) were found to be better adapted. The highest IVI is exhibited by Axonopus compressus (21.41), and this grass can be identified as key ecological tool in the rehabilitation of the degraded site. But no definite correlation between the IVI and the biomass of the various grass existed in the study sites. Chemical study of rhizosphere (RS) and non-rhizosphere (NRS) soil of these grasses revealed both aromatic and aliphatic compounds (M.W. 178-456). Four-ring pyrene was detected in NRS soil but not in RS soil. Microbiological study of RS and NRS soil showed high colony-forming unit (CFU) of HC-degrading microbes in RS compared to NRS. The increased microbial catabolism in RS soil established the fact that pyrene is transformed to aliphatic compounds. Metals in RS soil ranged from (in mg kg(-1)) 222.6 to 267.3 (Cr), 854 to 956 (Pb) and 180 to 247 (Ni), but despite the very high total metal concentration in RS and NRS soil, the CaCl2-extracted metals were relatively low in RS soil (1.04 for Cr, 0.56 for Pb, 0.35 for Ni). Plants with the highest uptake of metals were Leersia hexandra (36.43 mg Cr kg(-1)) and Kyllinga brevifolia (67.73 mg Pb kg(-1) and 40.24 mg Ni kg(-1)). These plant species could be potentially exploited for biomonitoring and bioremediation. Out of 15 plant species, 8 of them have high percentages of cellulose, crude fibres, lignin

  18. Fouling reduction by ozone-enhanced backwashing process in ultrafiltration of petroleum-based oil in water emulsion

    NASA Astrophysics Data System (ADS)

    Aryanti, Nita; Prihatiningtyas, Indah; Kusworo, Tutuk Djoko

    2017-06-01

    Ultrafiltration membrane has been successfully applied for oily waste water treatment. However, one significant drawback of membrane technology is fouling which is responsible for permeate flux decline as well as reducing membrane performance. One method commonly used to reduce fouling is a backwashing process. The backwashing is carried out by a push of reversed flow from permeate side to the feed side of a membrane to remove fouling on the membrane pore and release fouling release fouling layer on the external side. However, for adsorptive fouling, the backwashing process was not effective. On the other hand, Ozone demonstrated great performance for reducing organics fouling. Hence this research was focused on backwashing process with ozone for removing fouling due to ultrafiltration of petroleum based oil emulsion. Gasoline and diesel oil were selected as dispersed phase, while as continuous phase was water added with Tween 80 as a surfactant. This research found that the Ozone backwashing was effective to improve flux recovery. In ultrafiltration of gasoline emulsion, the flux recovery after Ozone backwashing was in the range of 42-74%. For ultrafiltration of diesel oil emulsion, the permeate flux recovery was about 35-84%. In addition, foulant deposition was proposed and predicting that foulant deposition for ultrafiltration of gasoline-in-water emulsion was surfactant as the top layer and the oil was underneath the surfactant. On the other hand, for ultrafiltration of diesel oil-in-water emulsion, the oil was predicted as a top layer above the surfactant foulant.

  19. Slow Radio-Frequency Processing of Large Oil Shale Volumes to Produce Petroleum-Like Shale Oil

    SciTech Connect

    Burnham, A K

    2003-08-20

    A process is proposed to convert oil shale by radio frequency heating over a period of months to years to create a product similar to natural petroleum. Electrodes would be placed in drill holes, either vertical or horizontal, and a radio frequency chosen so that the penetration depth of the radio waves is of the order of tens to hundreds of meters. A combination of excess volume production and overburden compaction drives the oil and gas from the shale into the drill holes, where it is pumped to the surface. Electrical energy for the process could be provided initially by excess regional capacity, especially off-peak power, which would generate {approx}3 x 10{sup 5} bbl/day of synthetic crude oil, depending on shale grade. The electricity cost, using conservative efficiency assumptions, is $4.70 to $6.30/bbl, depending on grade and heating rate. At steady state, co-produced gas can generate more than half the electric power needed for the process, with the fraction depending on oil shale grade. This would increase production to 7.3 x 10{sup 5} bbl/day for 104 l/Mg shale and 1.6 x 10{sup 6} bbl/day for 146 l/Mg shale using a combination of off-peak power and power from co-produced gas.

  20. Reconstructing pre-impact baseline conditions using benthic foraminifera in an area of increasing petroleum exploration activities

    NASA Astrophysics Data System (ADS)

    Dijkstra, Noortje; Junttila, Juho; Aagaard-Sørensen, Steffen

    2016-04-01

    While macrofauna is traditionally used to bio-monitor to state of the ecosystem, benthic foraminifera have large potential for bio-monitoring as well. As their tests stay preserved in the sedimentary archive it is possible to reconstruct pre-impacted conditions, by studying foraminiferal assemblages in sediment cores. The use of foraminiferal faunas as bio-monitoring tools is complicated by the natural variability. Therefore, detailed site specific studies are needed, to understand the range of natural variability of the area of interest. This study characterizes the natural variability in the Bjørnøyrenna-Ingøydjupet area in the Southern Barents Sea. The Southern Barents Sea is a relatively un-impacted and uncontaminated area, however petroleum industry related activities are expected to increase in the near future. This makes the area a valuable natural laboratory to establish pre-impacted baselines for future seabed monitoring programs. Benthic foraminiferal assemblages were examined at high resolution in sediment cores and compared to sediment properties and metal concentrations. Species associated to temperate water masses dominate in the southern part of the study area, while species associated to cooler water masses increase in abundance towards the north into Bjørnøyrenna. Additionally, the foraminiferal assemblages might reflect climatic oscillations on both millennial and decadal time scales. Patterns in the calcareous foraminiferal assemblages suggest an enhanced food supply as a result of increased Atlantic Water inflow through the region during the last 150 years. Sediment TOC content has been linked with variable inflow of Atlantic Water. A strong positive correlation was observed between TOC content with metal content in the cores. It is therefore essential to consider the role of natural variability of oceanographic conditions when using benthic foraminiferal assemblages to monitor for potential anthropogenic impacts on the environment. This

  1. A comprehensive evaluation of re-circulated bio-filter as a pretreatment process for petroleum refinery wastewater.

    PubMed

    Dai, Xiaoli; Chen, Chunmao; Yan, Guangxu; Chen, Yu; Guo, Shaohui

    2016-12-01

    Conventional biological treatment process is not very efficient for the treatment of petroleum refinery wastewater (PRW) that contains high-concentration of organic contaminants. Prior to biological treatment, an additional pretreatment process for PRW is required for the effluent to meet the discharge standards. While re-circulated bio-filter (RBF) has been applied as a pretreatment process in several PRW treatment plants, its effects have not been comprehensively evaluated. In this study, the parameters of operation, the changes in pollution indexes and contaminant composition in an engineered RBF have been investigated. We found that mainly highly active de-carbonization bacteria were present in the RBF, while no nitrification bacteria were found in the RBF. This indicated the absence of nitrification in this process. The biodegradable organic contaminants were susceptible to degradation by RBF, which decreased the Biological Oxygen Demand (BOD5) by 83.64% and the Chemical Oxygen Demand (CODCr) by 54.63%. Consequently, the alkalinity and pH value of RBF effluent significantly increased, which was unfavorable for the control of operating parameters in subsequent biological treatment. Along with the decrease of CODCr, the RBF effluent exhibited a reduction in biodegradability. 834 kinds of recalcitrant polar organic contaminants remained in the effluent; most of the contaminant molecules having complex structures of aromatic, polycyclic and heterocyclic rings. The results of this study showed that RBF could efficiently treat PRW for biodegradable organic contaminants removal; however, it is difficult to treat bio-refractory organic contaminants, which was unfavorable for the subsequent biological treatment process operation. An improved process might provide overall guarantees for the PRW treatment.

  2. Development of a Geologic Exploration Model foe the Permo-Pennsylvanian Petroleum System in South-Central Montana

    SciTech Connect

    David A. Lopez

    2007-06-30

    presented: migration occurred (1) before mid-Jurassic erosion produced a major regional unconformity or (2) about 82 million years ago. Migration pre-Laramide occurred because oil in both the Bighorn Basin and the Powder River Basin are part of the same petroleum system. Geochemical analyses of oils from producing fields across the region show the oils are all similar and have the same source and generation history. No Phosphoria source rocks exist in the project area of south-central Montana, requiring that oil migrated from distant source areas, probably in central and southwestern Wyoming. Oil shows and production in the Tensleep are absent in the northern part of the project area. This appears to be controlled by the merging of the top of the Tensleep Sandstone and the Jurassic unconformity (top of the Triassic Chugwater Formation). There should be potential for the discovery of oil in Tensleep stratigraphic traps or combination traps everywhere south of the Jurassic-Pennsylvanian Isopach zero contour except where the Tensleep has been exposed by uplift and erosion. Known Tensleep fields in south-central Montana are generally small in area, which agrees with outcrop studies that show eolian dune sequences are generally quite small in lateral extent, on the order of 10 to 40 acres. Although existing fields are small in area, they are very productive; individual wells will probably make 300,000 to 500,000 barrels of oil. In the project area, hydrodynamic considerations are important. All the existing Tensleep fields have active water drives. In many cases, the reservoir pressure today is as it was when initially discovered. In areas of high structural complexity, such as the Lodge Grass-Crow Agency fault and the Lake Basin fault zone, significant structural closure may be necessary to trap oil because of the strong hydrodynamic influence exerted by the underlying Madison Formation aquifer.

  3. Process waste assessment: Petroleum jelly removal from semiconductor die using trichloroethylene

    SciTech Connect

    Curtin, D.P.

    1993-05-01

    The process analyzed involves non-production, laboratory environment use of trichloroethylene for the cleaning of semiconductor devices. The option selection centered on the replacement of the trichloroethylene with a non-hazardous material. This process waste assessment was performed as part of a pilot project.

  4. Simultaneous application of chemical oxidation and extraction processes is effective at remediating soil Co-contaminated with petroleum and heavy metals.

    PubMed

    Yoo, Jong-Chan; Lee, Chadol; Lee, Jeung-Sun; Baek, Kitae

    2017-01-15

    Chemical extraction and oxidation processes to clean up heavy metals and hydrocarbon from soil have a higher remediation efficiency and take less time than other remediation processes. In batch extraction/oxidation process, 3% hydrogen peroxide (H2O2) and 0.1 M ethylenediaminetetraacetic acid (EDTA) could remove approximately 70% of the petroleum and 60% of the Cu and Pb in the soil, respectively. In particular, petroleum was effectively oxidized by H2O2 without addition of any catalysts through dissolution of Fe oxides in natural soils. Furthermore, heavy metals bound to Fe-Mn oxyhydroxides could be extracted by metal-EDTA as well as Fe-EDTA complexation due to the high affinity of EDTA for metals. However, the strong binding of Fe-EDTA inhibited the oxidation of petroleum in the extraction-oxidation sequential process because Fe was removed during the extraction process with EDTA. The oxidation-extraction sequential process did not significantly enhance the extraction of heavy metals from soil, because a small portion of heavy metals remained bound to organic matter. Overall, simultaneous application of oxidation and extraction processes resulted in highly efficient removal of both contaminants; this approach can be used to remove co-contaminants from soil in a short amount of time at a reasonable cost. Copyright © 2016 Elsevier Ltd. All rights reserved.

  5. Hyperspectral remote sensing detection of petroleum hydrocarbons in mixtures with mineral substrates: Implications for onshore exploration and monitoring

    NASA Astrophysics Data System (ADS)

    Scafutto, Rebecca Del'Papa Moreira; de Souza Filho, Carlos Roberto; de Oliveira, Wilson José

    2017-06-01

    Remote detection and mapping of hydrocarbons (PHCs) in situ in continental areas is still an operational challenge due to the small scale of the occurrences and the mix of spectral signatures of PHCs and mineral substrates in imagery pixels. Despite the increasing development of new technologies, the use of hyperspectral remote sensing data as a complementary tool for both oil exploration and environmental monitoring is not standard in the oil industry, despite its potential. The high spectral resolution of hyperspectral images allows the direct identification of PHCs on the surface and provides valuable information regarding the location and spread of oil spills that can assist in containment and cleanup operations. Combining the spectral information with statistical techniques also offers the potential to improve exploration programs focused on the discovery of new exploration fields through the qualitative and quantitative characterization of oil occurrences in onshore areas. In this scenario, the aim of this work was to develop methods that can assist the detection of continental areas affected by natural oil seeps or leaks (crude oils and fuels). A field experiment was designed by impregnating several mineral substrates with crude oils and fuels in varying concentrations. Simultaneous measurements of soil-PHC combinations were taken using both a hand-held spectrometer and an airborne hyperspectral imager. Classification algorithms were used to directly map the PHCs on the surface. Spectral information was submitted to a PLS (partial least square regression) to create a prediction model for the estimation of the concentrations of PHCs in soils. The developed model was able to detect three impregnation levels (low, intermediate, high), predicting values close to the concentrations used in the experiment. Given the quality of the results in controlled experiments, the methods developed in this research show the potential to support the oil industry in the

  6. Southeastern slope of the Bohemian Massif: Paleogene submarine fill of the Nesvacilka depression and its importance for petroleum exploration

    SciTech Connect

    Benada, S.; Berka, J.; Brzobohaty, J.; Rehanek, J. )

    1993-09-01

    The Nesvacilka depression is a trough-like paleovalley, about 2000 m deep, that was cut at the transition from the Cretaceous to the Paleocene by fluvial erosion into Jurassic and Carboniferous strata. This morphological feature, which is superimposed on an ancient tectonic zone, trends to the present southeast boundary of the Bohemian massif and is, from a hydrocarbon exploration point of view, the most important structure in the Czech Republic. During the Paleogene, marine transgressions gradually flooded this paleovalley. In the resulting relatively closed water body, more than 1500 m of thick deeper water clastics accumulated. These clastics display features similar to those described from submarine fan lobes in other hydrocarbon-producing basins. Following the discovery of two oil and gas accumulations contained in Jurassic and Paleogene clastic rocks, exploration was focused on the central parts of the Nesvacilka depression. The depositional pattern of its Paleogene fill was worked out on the basis of well data and the results of two-dimensional and three-dimensional seismic surveys. From this, it was concluded that accumulation of the Paleogene clastic series was significantly influenced by sea level changes. The depositional concepts developed may be applied to the deeper parts of the Nesvacilka Canyon, where exploration for hydrocarbons is still at an early stage. Results obtained so far indicate that the Nesvacilka depression can be ranked as the most prospective oil play in the Czech Republic. Play concepts developed may be extrapolated to similar morphological features occurring elsewhere in the Carpathian foreland.

  7. Petroleum-derived carbons

    SciTech Connect

    Bacha, J.D.; Newman, J.W.; White, J.L.

    1986-01-01

    This book presents the papers given at a symposium on petroleum coke. Topics considered at the symposium included mesophase formation, thermal analysis, rheology, microstructure, carbon fibers, electron microscopy, residual oil processing, synthetic aromatic pitch, delayed coking, calcination, desulfurization, graphite, metallurgical coke, carbon black, natural gas pyrolysis, liquid impregnation, and carbon-carbon composites.

  8. The effects of Fenton process on the removal of petroleum hydrocarbons from oily sludge in Shiraz oil refinery, Iran

    PubMed Central

    2014-01-01

    Background Due to the high concentrations of total petroleum hydrocarbons (TPH) in oily sludge and their environmental hazards, the concern regarding their effects on health and the environment has increased. The main objective of this research was focused on evaluating the feasibility of using Fenton process in removing TPH in oily sludge from Shiraz oil refinery, Southern Iran. Results To determine optimum conditions, four different parameters were assessed at four different levels using Taguchi method. According to data, the optimum conditions were as follows: the reaction time of 1 hour, H2O2 to sample mass ratio of 15, H2O2 to Fe (II) molar ratio of 10 and pH of 5. The maximum TPH reduction rate was 36.47%. Because of the semi-solid nature of the sample and the hydroxyl radicals mainly generated in the aqueous solution, TPH reduction rate greatly improved by adding water. Ultimately, by adding 40 ml water per gram of the oily sludge under optimized conditions, the reduction rate of 73.07% was achieved. Conclusions The results demonstrated that this method can be used as a pre-treatment method for the oily sludge. Moreover, a complementary treatment is necessary to reach the standard limit. PMID:24422994

  9. Petroleum supply monthly, March 1994

    SciTech Connect

    Not Available

    1994-03-30

    Data presented in the Petroleum Supply Monthly (PSM) describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics. The tables and figures in the Summary Statistics section of the PSM present a time series of selected petroleum data on a US level. Most time series include preliminary estimates for one month based on the Weekly Petroleum Supply Reporting System; statistics based on the most recent data from the Monthly Petroleum Supply Reporting System (MPSRS); and statistics published in prior issues of the PSM and PSA. The Detailed Statistics tables of the PSM present statistics for the most current month available as well as year-to-date. In most cases, the statistics are presented for several geographic areas -- the United States (50 States and the District of Columbia), five PAD Districts, and 12 Refining Districts. At the US and PAD District level, the total volume and the daily rate of activities are presented. The statistics are developed from monthly survey forms submitted by respondents to the EIA and from data provided from other sources.

  10. Petroleum supply monthly, June 1993

    SciTech Connect

    Not Available

    1993-06-28

    Data presented in the Petroleum Supply Monthly (PSM) describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics. The tables and figures ih the Summary Statistics section of the PSM present a time series of selected petroleum data on a US level. Most time series include preliminary estimates for one month based on the Weekly Petroleum Supply Reporting System; statistics based on the most recent data from the Monthly Petroleum Supply Reporting System (MPSRS); and statistics published in prior issues of the PSM and PSA. The Detailed Statistics tables of the PSM present statistics for the most current month available as well as year-to-date. In most cases, the statistics are presented for several geographic areas - - the United States (50 States and the District of Columbia), five PAD Districts, and 12 Refining Districts. At the US and PAD District level, the total volume and the daily rate of activities are presented. The statistics are developed from monthly survey forms submitted by respondents to the EIA and from data provided firom other sources.

  11. Evaluation of concepts for controlling exhaust emissions from minimally processed petroleum and synthetic fuels

    NASA Technical Reports Server (NTRS)

    Russell, P. L.; Beal, G. W.; Sederquist, R. A.; Shultz, D.

    1981-01-01

    Rich-lean combustor concepts designed to enhance rich combustion chemistry and increase combustor flexibility for NO(x) reduction with minimally processed fuels are examined. Processes such as rich product recirculation in the rich chamber, rich-lean annihilation, and graduated air addition or staged rich combustion to release bound nitrogen in steps of reduced equivalence ratio are discussed. Variations to the baseline rapid quench section are considered, and the effect of residence time in the rich zone is investigated. The feasibility of using uncooled non-metallic materials for the rich zone combustion construction is also addressed. The preliminary results indicate that rich primary zone staged combustion provides environmentally acceptable operation with residual and/or synthetic coal-derived liquid fuels

  12. [Recent advances in analysis of petroleum geological samples by comprehensive two-dimensional gas chromatography].

    PubMed

    Gao, Xuanbo; Chang, Zhenyang; Dai, Wei; Tong, Ting; Zhang, Wanfeng; He, Sheng; Zhu, Shukui

    2014-10-01

    Abundant geochemical information can be acquired by analyzing the chemical compositions of petroleum geological samples. The information obtained from the analysis provides scientifical evidences for petroleum exploration. However, these samples are complicated and can be easily influenced by physical (e. g. evaporation, emulsification, natural dispersion, dissolution and sorption), chemical (photodegradation) and biological (mainly microbial degradation) weathering processes. Therefore, it is very difficult to analyze the petroleum geological samples and they cannot be effectively separated by traditional gas chromatography/mass spectrometry. A newly developed separation technique, comprehensive two-dimensional gas chromatography (GC x GC), has unique advantages in complex sample analysis, and recently it has been applied to petroleum geological samples. This article mainly reviews the research progres- ses in the last five years, the main problems and the future research about GC x GC applied in the area of petroleum geology.

  13. Novel Catalysts and Processing Technologies for Production of Aerospace Fuels from Non-Petroleum Raw Materials

    NASA Technical Reports Server (NTRS)

    Hepp, Aloysius F.; Kulis, Michael J.; Psarras, Peter C.; Ball, David W.; Timko, Michael T.; Wong, Hsi-Wu; Peck, Jay; Chianelli, Russell R.

    2014-01-01

    Transportation fuels production (including aerospace propellants) from non-traditional sources (gases, waste materials, and biomass) has been an active area of research and development for decades. Reducing terrestrial waste streams simultaneous with energy conversion, plentiful biomass, new low-cost methane sources, and/or extra-terrestrial resource harvesting and utilization present significant technological and business opportunities being realized by a new generation of visionary entrepreneurs. We examine several new approaches to catalyst fabrication and new processing technologies to enable utilization of these nontraditional raw materials. Two basic processing architectures are considered: a single-stage pyrolysis approach that seeks to basically re-cycle hydrocarbons with minimal net chemistry or a two-step paradigm that involves production of supply or synthesis gas (mainly carbon oxides and H2) followed by production of fuel(s) via Sabatier or methanation reactions and/or Fischer-Tröpsch synthesis. Optimizing the fraction of product stream relevant to targeted aerospace (and other transportation) fuels via modeling, catalyst fabrication and novel reactor design are described. Energy utilization is a concern for production of fuels for either terrestrial or space operations; renewable sources based on solar energy and/or energy efficient processes may be mission enabling. Another important issue is minimizing impurities in the product stream(s), especially those potentially posing risks to personnel or operations through (catalyst) poisoning or (equipment) damage. Technologies being developed to remove (and/or recycle) heteroatom impurities are briefly discussed as well as the development of chemically robust catalysts whose activities are not diminished during operation. The potential impacts on future missions by such new approaches as well as balance of system issues are addressed.

  14. Novel Catalysts and Processing Technologies for Production of Aerospace Fuels from Non-Petroleum Raw Materials

    NASA Technical Reports Server (NTRS)

    Hepp, A. F.; Kulis, M. J.; Psarras, P. C.; Ball, D. W.; Timko, M. T.; Wong, H.-W.; Peck, J.; Chianelli, R. R.

    2014-01-01

    Transportation fuels production (including aerospace propellants) from non-traditional sources (gases, waste materials, and biomass) has been an active area of research and development for decades. Reducing terrestrial waste streams simultaneous with energy conversion, plentiful biomass, new low-cost methane sources, and/or extra-terrestrial resource harvesting and utilization present significant technological and business opportunities being realized by a new generation of visionary entrepreneurs. We examine several new approaches to catalyst fabrication and new processing technologies to enable utilization of these non-traditional raw materials. Two basic processing architectures are considered: a single-stage pyrolysis approach that seeks to basically re-cycle hydrocarbons with minimal net chemistry or a two-step paradigm that involves production of supply or synthesis gas (mainly carbon oxides and hydrogen) followed by production of fuel(s) via Sabatier or methanation reactions and/or Fischer-Tropsch synthesis. Optimizing the fraction of product stream relevant to targeted aerospace (and other transportation) fuels via modeling, catalyst fabrication and novel reactor design are described. Energy utilization is a concern for production of fuels for either terrestrial or space operations; renewable sources based on solar energy and/or energy efficient processes may be mission enabling. Another important issue is minimizing impurities in the product stream(s), especially those potentially posing risks to personnel or operations through (catalyst) poisoning or (equipment) damage. Technologies being developed to remove (and/or recycle) heteroatom impurities are briefly discussed as well as the development of chemically robust catalysts whose activity are not diminished during operation. The potential impacts on future missions by such new approaches as well as balance of system issues are addressed.

  15. Developing Terrestrial Trophic Models for Petroleum and Natural Gas Exploration and Production Sites: The Oklahoma Tallgrass Prairie Preserve Example

    SciTech Connect

    Stevenson, M; Coty, J; Stewart, J; Carlsen, T; Callaham, M

    2001-01-26

    This document details procedures to be used when constructing a conceptual terrestrial trophic model for natural gas and oil exploration and production sites. A site conceptual trophic model is intended for use in evaluating ecological impacts of oil and brine releases at E&P sites from a landscape or ecosystem perspective. The terrestrial trophic model protocol was developed using an example site, the Tallgrass Prairie Preserve (TPP) in Oklahoma. The procedure focuses on developing a terrestrial trophic model using information found in the primary literature, and augmented using site-specific research where available. Although the TPP has been the subject of considerable research and public interest since the high-profile reintroduction of bison (Bison bison) in 1993, little formal work has been done to develop a food web for the plant and animal communities found at the preserve. We describe how to divide species into guilds using explicit criteria on the basis of resource use and spatial distribution. For the TPP, sixteen guilds were developed for use in the trophic model, and the relationships among these guilds were analyzed. A brief discussion of the results of this model is provided, along with considerations for its use and areas for further study.

  16. Exploring Moral Values with Young Adolescents through Process Drama

    ERIC Educational Resources Information Center

    Gervais, Marie

    2006-01-01

    The connection between drama and moral education in young adolescence has not been widely researched. This study examines the role of process drama. In this study process drama is defined as educational drama for awareness and conflict resolution through the creation of a dramatic collective exploring the moral values of junior high school age…

  17. Petroleum geology of heavy oil in the Oriente basin of Ecuador: Exploration and exploitation challenge for the 1990s

    SciTech Connect

    Leadholm, R.H. )

    1990-05-01

    Published Ecuadorian government forecasts suggest that Oriente basin light oil (21-32{degree} API) production may start to decline in the early to mid-1990s. To maintain stabilized production into the next century, heavy oil reserves (10-20{degree} API) will have to be aggressively exploited. The Oriente's undeveloped proven plus probable heavy reserves are substantial and are expected to exceed 0.5 billion bbl. A recent discovery made by Conoc Ecuador Ltd., operator of Block 16 for a group which consists of O.P.I.C., Maxus, Nomeco, Murphy and Canam, is a good model for future exploration and exploitation of heavy oil in the remote eastern regions of the basin. Amo-1 tested a low-relief anticline (less than 100 ft vertical closure) and encountered 10-20{degree} API oil in five Cretaceous sandstone reservoirs (8,000-10,000 ft depth). Cumulative test production was 1,062 BOPD. Subsequent drilling along the trend resulted in three additional discoveries. The Cretaceous sands were transported from the Brazilian shield by the westward flowing proto-Amazon River and were deposited in fluviodeltaic, tidal, and high-energy marginal marine environments. Air permeabilities are high and geometric mean values approaching several darcies. Porosities average 18-22% in generally well-consolidated sands. The heavy oils are the result of mild biodegradation and/or expulsion from a thermally immature source. Oil-to-oil correlations suggest that all of the basin oils have the same or similar origin, probably marine calcareous shales of the Cretaceous Napo formation. The Block 16 project will provide a major step toward the strategic exploitation of the Oriente basin's heavy oil reserves, when it comes on stream in the early 1990s.

  18. Studies on the origin and transformation of selenium and its chemical species along the process of petroleum refining

    NASA Astrophysics Data System (ADS)

    Stivanin de Almeida, Cibele M.; Ribeiro, Anderson S.; Saint'Pierre, Tatiana D.; Miekeley, Norbert

    2009-06-01

    Inductively coupled plasma optical emission spectrometry and mass spectrometry (ICPMS), the latter hyphenated to flow injection hydride generation, electrothermal vaporization or ion chromatography, have been applied to the chemical characterization of crude oil, aqueous process stream samples and wastewaters from a petroleum refinery, in order to get information on the behavior of selenium and its chemical species along effluent generation and treatment. Multielemental characterization of these effluents by ICPMS revealed a complex composition of most of them, with high salinity and potential spectral and non-spectral interferents present. For this reason, a critical re-assessment of the analytical techniques for the determination of total selenium and its species was performed. Methane was employed as gas in dynamic reaction cell ICPMS and cell parameters were optimized for a simulated brine matrix and for diluted aqueous solutions to match the expected process and treated wastewaters samples. The signal-to-background ratios for 78Se and 80Se were used as criteria in optimization, the first isotope resulting in better detection limits for the simulated brine matrix ( 78Se: 0.07 μg L - 1 , 80Se: 0.31 μg L - 1 ). A large variability in the concentration of selenium (from < 10 μg kg - 1 up to 960 μg kg - 1 ) was observed in 16 of the most frequently processed crude oil samples in the refinery here investigated, which may explain the pronounced concentrations changes of this element measured in aqueous process stream and wastewater samples. Highest concentrations of total selenium were analyzed in samples from the hydrotreater (up to about 1800 μg L - 1 ). The predominance of selenocyanate (SeCN -) was observed in most of the wastewaters so far investigated, but also other species were detected with retention times different from Se(IV), Se(VI) and SeCN -. Colloidal selenium (Se 0) was the only Se-species observed in samples from the atmospheric distillation

  19. Inhibition of retrogressive reactions in coal/petroleum co-processing. Quarterly technical progress report, October 1, 1991--December 30, 1991

    SciTech Connect

    Schobert, H.H.; Tomic, J.

    1992-01-01

    The overall objective of this project is to develop a fundamental understanding of the reactions occurring at the onset of coke formation during the co-processing of coals with petroleum residua. The specific objectives include examination of chemical components, or groups of components, in coals and petroleum feedstocks to quantify and rank the effects of these components in retarding or enhancement of coke formation. The work involves bench scale reactions in microautoclaves, supplemented by studies of the carbonaceous residues by such techniques as diffuse reflectance Fourier transform infrared spectroscopy and {sup 13}C nuclear magnetic resonance spectrometry. During this reporting period work focused on identification of mechanisms of coke formation. The objective of this task is to identify those compounds or components which are specifically responsible for initiating coke formation.

  20. Petroleum Processing Efficiency Improvement

    SciTech Connect

    John Schabron; Joseph Rovani; Mark Sanderson; Jenny Loveridge

    2012-09-01

    A series of volatile crude oils was characterized using the Asphaltene Determinator oncolumn precipitation and re-dissolution method developed at Western Research Institute (WRI). Gravimetric asphaltenes and polars fractions from silica gel chromatography separation of the oils were characterized also. A study to define the differences in composition of asphaltenes in refinery desalter rag layer emulsions and the corresponding feed and desalter oils was conducted. Results indicate that the most polar and pericondensed aromatic material in the asphaltenes is enriched in the emulsions. The wax types and carbon number distributions in the two heptaneeluting fractions from the Waxphaltene Determinator separation were characterized by repetitive collection of the fractions followed by high temperature gas chromatography (GC) and Fourier transform infrared spectroscopy (FTIR). High resolution Fourier transform ion cyclotron resonance mass spectrometry (FT-ICRMS) was conducted by researchers at the Florida State University National High Magnetic Field laboratory in a no-cost collaboration with the study.

  1. 31 CFR 576.308 - Iraqi petroleum and petroleum products.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 31 Money and Finance:Treasury 3 2011-07-01 2011-07-01 false Iraqi petroleum and petroleum products... SANCTIONS REGULATIONS General Definitions § 576.308 Iraqi petroleum and petroleum products. The term Iraqi petroleum and petroleum products means any petroleum, petroleum products, or natural gas originating in...

  2. 31 CFR 576.308 - Iraqi petroleum and petroleum products.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 31 Money and Finance:Treasury 3 2012-07-01 2012-07-01 false Iraqi petroleum and petroleum products... SANCTIONS REGULATIONS General Definitions § 576.308 Iraqi petroleum and petroleum products. The term Iraqi petroleum and petroleum products means any petroleum, petroleum products, or natural gas originating in...

  3. 31 CFR 576.308 - Iraqi petroleum and petroleum products.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 31 Money and Finance:Treasury 3 2014-07-01 2014-07-01 false Iraqi petroleum and petroleum products... SANCTIONS REGULATIONS General Definitions § 576.308 Iraqi petroleum and petroleum products. The term Iraqi petroleum and petroleum products means any petroleum, petroleum products, or natural gas originating in...

  4. 31 CFR 576.308 - Iraqi petroleum and petroleum products.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 31 Money and Finance:Treasury 3 2013-07-01 2013-07-01 false Iraqi petroleum and petroleum products... SANCTIONS REGULATIONS General Definitions § 576.308 Iraqi petroleum and petroleum products. The term Iraqi petroleum and petroleum products means any petroleum, petroleum products, or natural gas originating in...

  5. A brief history of oil and gas exploration in the southern San Joaquin Valley of California: Chapter 3 in Petroleum systems and geologic assessment of oil and gas in the San Joaquin Basin Province, California

    USGS Publications Warehouse

    Takahashi, Kenneth I.; Gautier, Donald L.

    2007-01-01

    The Golden State got its nickname from the Sierra Nevada gold that lured so many miners and settlers to the West, but California has earned much more wealth from so-called “black gold” than from metallic gold. The San Joaquin Valley has been the principal source for most of the petroleum produced in the State during the past 145 years. In attempting to assess future additions to petroleum reserves in a mature province such as the San Joaquin Basin, it helps to be mindful of the history of resource development. In this chapter we present a brief overview of the long and colorful history of petroleum exploration and development in the San Joaquin Valley. This chapter relies heavily upon the work of William Rintoul, who wrote extensively on the history of oil and gas exploration in California and especially in the San Joaquin Valley. No report on the history of oil and gas exploration in the San Joaquin Valley would be possible without heavily referencing his publications. We also made use of publications by Susan Hodgson and a U.S. Geological Survey Web site, Natural Oil and Gas Seeps in California (http://seeps.wr.usgs.gov/seeps/index.html), for much of the material describing the use of petroleum by Native Americans in the San Joaquin Valley. Finally, we wish to acknowledge the contribution of Don Arnot, who manages the photograph collection at the West Kern Oil Museum in Taft, California. The collection consists of more than 10,000 photographs that have been scanned and preserved in digital form on CD-ROM. Many of the historical photographs used in this paper are from that collection. Finally, to clarify our terminology, we use the term “San Joaquin Valley” when we refer to the geographical or topographical feature and the term “San Joaquin Basin” when we refer to geological province and the rocks therein.

  6. Web-Enabled Simulations: Exploring the Learning Process

    ERIC Educational Resources Information Center

    Whitehouse, Kendall

    2005-01-01

    With funding from Alfred West, Jr., an alumnus of The Wharton School of the University of Pennsylvania and chairman of SEI Investments, Wharton Dean Patrick T. Harker established the Alfred West Jr. Learning Lab to explore ways "to reach a deeper understanding of how people learn and to push that process to a higher level using advancements…

  7. Petroleum supply monthly, October 1990. [Contains Glossary

    SciTech Connect

    Not Available

    1990-12-27

    Data presented in this report describes the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in Primary Supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States. 12 figs., 54 tabs.

  8. Petroleum Supply Monthly, September 1990. [Contains glossary

    SciTech Connect

    Whited, D.; Jacobus, P.

    1990-11-28

    Data presented in this PSM describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in Primary Supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States. 12 figs., 46 tabs.

  9. Petroleum supply monthly, October 1991. [Contains glossary

    SciTech Connect

    Not Available

    1991-10-30

    Data presented in this report describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in Primary Supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importer, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States. Data are divided into two sections (1) the Summary Statistics and (2) the Detailed Statistics 14 figs., 56 tabs.

  10. A Successful Infusion Process for Enabling Lunar Exploration Technologies

    NASA Technical Reports Server (NTRS)

    Over, Ann P.; Klem, Mark K.; Motil, Susan M.

    2008-01-01

    The NASA Vision for Space Exploration begins with a more reliable flight capability to the International Space Station and ends with sending humans to Mars. An important stepping stone on the path to Mars encompasses human missions to the Moon. There is little doubt throughout the stakeholder community that new technologies will be required to enable this Vision. However, there are many factors that influence the ability to successfully infuse any technology including the technical risk, requirement and development schedule maturity, and, funds available. This paper focuses on effective infusion processes that have been used recently for the technologies in development for the lunar exploration flight program, Constellation. Recent successes with Constellation customers are highlighted for the Exploration Technology Development Program (ETDP) Projects managed by NASA Glenn Research Center (GRC). Following an overview of the technical context of both the flight program and the technology capability mapping, the process is described for how to effectively build an integrated technology infusion plan. The process starts with a sound risk development plan and is completed with an integrated project plan, including content, schedule and cost. In reality, the available resources for this development are going to change over time, necessitating some level of iteration in the planning. However, the driving process is based on the initial risk assessment, which changes only when the overall architecture changes, enabling some level of stability in the process.

  11. Petroleum resource potential GIS of northern Afghanistan

    USGS Publications Warehouse

    Steinshouer, Douglas W.; Klett, Timothy R.; Ulmishek, Gregory F.; Wandrey, Craig J.; Wahl, Ronald R.; Hill, Ronald J.; Pribil, Michael J.; Pawlewicz, Mark J.; King, J. David; Agena, Warren F.; Taylor, David J.; Amirzada, Abdulla; Selab, Amir Mohammad; Mutteh, Abdul-Salam; Haidari, Ghulam Naqshband; Wardak, Moeengul Gullabudeen

    2006-01-01

    The CD-ROM contains an ESRI ArcReader format GIS project presenting the results of a petroleum resource assessment of Northern Afghanistan, and other data used in the petroleum assessment. Geologic, structural, field, well, political, and other GIS layers covering Afghanistan, Northern Afghanistan and adjacent areas, along with associated geochemical and other data tables pertinent to a petroleum assessment are included. The purpose of this GIS is to provide the basic data layers and tables required to support the petroleum assessment, data for further exploration and development, and an index of known data.

  12. Microbial dynamics in petroleum oilfields and their relationship with physiological properties of petroleum oil reservoirs.

    PubMed

    Varjani, Sunita J; Gnansounou, Edgard

    2017-08-09

    Petroleum is produced by thermal decay of buried organic material over millions of years. Petroleum oilfield ecosystems represent resource of reduced carbon which favours microbial growth. Therefore, it is obvious that many microorganisms have adapted to harsh environmental conditions of these ecosystems specifically temperature, oxygen availability and pressure. Knowledge of microorganisms present in ecosystems of petroleum oil reservoirs; their physiological and biological properties help in successful exploration of petroleum. Understanding microbiology of petroleum oilfield(s) can be used to enhance oil recovery, as microorganisms in oil reservoirs produce various metabolites viz. gases, acids, solvents, biopolymers and biosurfactants. The aim of this review is to discuss characteristics of petroleum oil reservoirs. This review also provides an updated literature on microbial ecology of these extreme ecosystems including microbial origin as well as various types of microorganisms such as methanogens; iron, nitrate and sulphate reducing bacteria, and fermentative microbes present in petroleum oilfield ecosystems. Copyright © 2017 Elsevier Ltd. All rights reserved.

  13. Identity processes and statuses in post-Soviet Georgia: Exploration processes operate differently.

    PubMed

    Skhirtladze, Nino; Javakhishvili, Nino; Schwartz, Seth J; Beyers, Wim; Luyckx, Koen

    2016-02-01

    Identity formation is one of the main developmental tasks of emerging adulthood. Based on quantitative data on a five-dimensional model of identity formation, we concluded that the identity formation process has some different features in the Republic of Georgia than it does in many Western countries. Results obtained from young Georgian adults (N = 295, 82.6% female) yielded four exploration processes instead of three, which is in line with the recent Swiss findings. A key difference between Georgia and the Western contexts, however, is that exploration in breadth is highly correlated with ruminative exploration. Cluster analysis, which produced six identity clusters, also supported this pattern. Achievement, the most adjusted cluster in Western contexts, was relatively low on exploration in breadth. We discuss ways in which the Georgian transition from Soviet communism to a more globalized society may contribute to limited opportunities for identity exploration and may add some tension to the identity development process.

  14. A Computerized Petroleum Geology Package.

    ERIC Educational Resources Information Center

    Moser, Louise E.

    1983-01-01

    Describes a package of computer programs developed to implement an oil exploration game that gives undergraduate students practical experience in applying theoretical principles of petroleum geology. The programs facilitate management of the game by the instructor and enhance the learning experience. (Author/MBR)

  15. World petroleum systems with Jurassic source rocks

    SciTech Connect

    Klemme, H.D. )

    1993-11-08

    Fourteen petroleum systems with Upper Jurassic source rocks contain one quarter of the world's discovered oil and gas. Eleven other systems with Lower and Middle Jurassic source rocks presently have a minor but significant amount of discovered oil and gas. The purpose of this article is to review the systems geologically, describe their location in space and time on a continental scale, estimate their relative petroleum system recovery efficiencies, and outline the effect their essential elements and processes have on their petroleum plumbing.

  16. Exploration of polyelectrolytes as draw solutes in forward osmosis processes.

    PubMed

    Ge, Qingchun; Su, Jincai; Amy, Gary L; Chung, Tai-Shung

    2012-03-15

    The development of the forward osmosis (FO) process has been constrained by the slow development of appropriate draw solutions. Two significant concerns related to draw solutions are the draw solute leakage and intensive energy requirement in recycling draw solutes after the FO process. FO would be much attractive if there is no draw solute leakage and the recycle of draw solutes is easy and economic. In this study, polyelectrolytes of a series of polyacrylic acid sodium salts (PAA-Na), were explored as draw solutes in the FO process. The characteristics of high solubility in water and flexibility in structural configuration ensure the suitability of PAA-Na as draw solutes and their relative ease in recycle through pressure-driven membrane processes. The high water flux with insignificant salt leakage in the FO process and the high salt rejection in recycle processes reveal the superiority of PAA-Na to conventional ionic salts, such as NaCl, when comparing their FO performance via the same membranes. The repeatable performance of PAA-Na after recycle indicates the absence of any aggregation problems. The overall performance demonstrates that polyelectrolytes of PAA-Na series are promising as draw solutes, and the new concept of using polyelectrolytes as draw solutes in FO processes is applicable. Copyright © 2011 Elsevier Ltd. All rights reserved.

  17. Overview of infrared in the petroleum industry

    NASA Astrophysics Data System (ADS)

    Ohliger, Albert A.

    2003-04-01

    Infrared Thermography has been found to be a very valuable tool in the petroleum industry. It has had focus in surveying all the types of equipment in its asset base. This includes electrical distribution systems, pumping systems, piping systems, exchangers, flares, process fired heaters and many other types of equipment. The petroleum industry is divided into three basic operating areas; Upstream, Midstream and Downstream. Upstream operation covers the exploration, drilling and production of natural gas and crude oil. Midstream operation in the petroleum industry is the distribution and storage system between the Upstream to the Downstream systems. Downstream operations make the finished energy product and are the refineries and chemical plants. As in other industries, the petroleum industry has mechanical equipment, electrical equipment, pressure-containing equipment, and fixed structures. In addition to this equipment, there is some specialty equipment which includes items such as fired heaters and specialty process vessels. The industry has put in place infrared programs as a predictive maintenance tool in many of their operating areas. Using infrared to monitor the operating integrity on equipment is one of the synergies now being better developed. The opportunity is to define measurable thermal patterns that can be used to define defects and predict failures. Infrared technology is a mature reliability work process and been around for many years. The first commercial infrared camera was available in the '70's. These radiometric cameras and the support equipment have had many improvements since then. The use of the technology has also been improved with synergies incorporated from many type of industries, including the military. Infrared is a technology that has been added to the predictive & preventative maintenance toolbox of the petroleum industry reliability focus. An important part of any reliability work process is to have predictive tools to define

  18. The 'Robust' roster: exploring the nurse rostering process.

    PubMed

    Drake, Robert G

    2014-09-01

    To identify and explore the relationships between stages of the rostering process and the robustness of the worked roster. Once published, a nurse roster is often subject to many changes. However, post-approval changes and their implications are rarely examined. Consequently, there is little evidence to determine whether a 'worked' roster was safe, efficient or fair. Electronic rostering systems provide greater transparency of the rostering process allowing postapproval changes to be examined more thoroughly. Using quantitative data, this study compares the outcomes from different stages of the roster process with the shifts breaking roster rules. This study covered the period November 2009-January 2013 and included forty-two roster periods from fifteen wards. For each of the rosters, data specifying the type of shift assignment (request, manual and automatic) and number of shifts changed after approval (response variables) were captured. Linear regression analysis was then used to identify and explore the relationships between these response variables and the number of shifts breaking rules. Roster robustness is unaffected by the number of staff requests, Yet, how shifts are assigned before approval and the number of changes postapproval have a marked effect on the robustness of the roster. Roster 'robustness' is determined by the quality of the approved roster and subsequent postapproval demand- and supply-driven changes. Despite evidence that e-rostering can improve roster robustness, many Ward Managers prefer to roster manually. On some wards, rosters are approved, regardless of the number of rule breakages occurring. © 2014 John Wiley & Sons Ltd.

  19. The harm of petroleum-polluted soil and its remediation research

    NASA Astrophysics Data System (ADS)

    Wang, Shuguang; Xu, Yan; Lin, Zhaofeng; Zhang, Jishi; Norbu, Namkha; Liu, Wei

    2017-08-01

    Land resources are the foundation of human's survival and development, and it's one of the most valuable natural resources of each country. In view of the serious problems of petroleum pollution to soil caused during the exploration and development processes, this article based on a large number of literature researches, firstly discussed the compositions and properties of petroleum contaminants, secondly investigated some restoration methods for the current situation of petroleum polluted soil, compared and analyzed the advantages and disadvantages of three kinds of bioremediation technologies. Finally, according to the deficiencies of previous research and existing problems, made an outlook of the physical and chemical remediation, bioremediation, and microbe-plant remediation, to provide some enlightenments for petroleum-contaminated soil remediation.

  20. A Coordinated Initialization Process for the Distributed Space Exploration Simulation

    NASA Technical Reports Server (NTRS)

    Crues, Edwin Z.; Phillips, Robert G.; Dexter, Dan; Hasan, David

    2007-01-01

    A viewgraph presentation on the federate initialization process for the Distributed Space Exploration Simulation (DSES) is described. The topics include: 1) Background: DSES; 2) Simulation requirements; 3) Nine Step Initialization; 4) Step 1: Create the Federation; 5) Step 2: Publish and Subscribe; 6) Step 3: Create Object Instances; 7) Step 4: Confirm All Federates Have Joined; 8) Step 5: Achieve initialize Synchronization Point; 9) Step 6: Update Object Instances With Initial Data; 10) Step 7: Wait for Object Reflections; 11) Step 8: Set Up Time Management; 12) Step 9: Achieve startup Synchronization Point; and 13) Conclusions

  1. Applied Geophysics Opportunities in the Petroleum Industry

    NASA Astrophysics Data System (ADS)

    Olgaard, D. L.; Tikku, A.; Roberts, J. C.; Martinez, A.

    2012-12-01

    Meeting the increasing global demand for energy over the next several decades presents daunting challenges to engineers and scientists, including geoscientists of all disciplines. Many opportunities exist for geophysicists to find and produce oil and gas in a safe, environmentally responsible and affordable manner. Successful oil and gas exploration involves a 'Plates to Pores' approach that integrates multi-scale data from satellites, marine and land seismic and non-seismic field surveys, lab experiments, and even electron microscopy. The petroleum industry is at the forefront of using high performance computing to develop innovative methods to process and analyze large volumes of seismic data and perform realistic numerical modeling, such as finite element fluid flow and rock deformation simulations. Challenging and rewarding jobs in exploration, production and research exist for students with BS/BA, MS and PhD degrees. Geophysics students interested in careers in the petroleum industry should have a broad foundation in science, math and fundamental geosciences at the BS/BA level, as well as mastery of the scientific method, usually gained through thesis work at MS and PhD levels. Field geology or geophysics experience is also valuable. Other personal attributes typical for geoscientists to be successful in industry include a passion for solving complex geoscience problems, the flexibility to work on a variety of assignments throughout a career and skills such as teamwork, communication, integration and leadership. In this presentation we will give examples of research, exploration and production opportunities for geophysicists in petroleum companies and compare and contrast careers in academia vs. industry.

  2. Petroleum supply monthly with data from January 1998

    SciTech Connect

    1998-03-01

    The Petroleum Supply Monthly (PSM) is one of a family of four publications produced by the Petroleum Supply Division within the Energy Information Administration (EIA) reflecting different levels of data timeliness and completeness. Data presented in the PSM describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States.

  3. Petroleum supply monthly, May 1998, with data for March 1998

    SciTech Connect

    1998-05-01

    The Petroleum Supply Monthly (PSM) is one of a family of four publications produced by the Petroleum Supply Division within the Energy Information Administration (EIA) reflecting different levels of data timeliness and completeness. Data presented in the PSM describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States. 16 figs., 66 tabs.

  4. Petroleum supply monthly with data for March 1997

    SciTech Connect

    1997-05-01

    The Petroleum Supply Monthly (PSM) is one of a family of four publications produced by the Petroleum Supply Division within the Energy Information Administration reflecting different levels of data timeliness and completeness. Data presented in the PSM describe the supply and disposition of petroleum products in the United States and major U.S. geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 states and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States.

  5. Deployment Process, Mechanization, and Testing for the Mars Exploration Rovers

    NASA Technical Reports Server (NTRS)

    Iskenderian, Ted

    2004-01-01

    NASA's Mar Exploration Rover (MER) robotic prospectors were produced in an environment of unusually challenging schedule, volume, and mass restrictions. The technical challenges pushed the system s design towards extensive integration of function, which resulted in complex system engineering issues. One example of the system's integrated complexity can be found in the deployment process for the rover. Part of this process, rover "standup", is outlined in this paper. Particular attention is given to the Rover Lift Mechanism's (RLM) role and its design. Analysis methods are presented and compared to test results. It is shown that because prudent design principles were followed, a robust mechanism was created that minimized the duration of integration and test, and enabled recovery without perturbing related systems when reasonably foreseeable problems did occur. Examples of avoidable, unnecessary difficulty are also presented.

  6. Processing of Lunar Soil Simulant for Space Exploration Applications

    NASA Technical Reports Server (NTRS)

    Sen, Subhayu; Ray, Chandra S.; Reddy, Ramana

    2005-01-01

    NASA's long-term vision for space exploration includes developing human habitats and conducting scientific investigations on planetary bodies, especially on Moon and Mars. To reduce the level of up-mass processing and utilization of planetary in-situ resources is recognized as an important element of this vision. Within this scope and context, we have undertaken a general effort aimed primarily at extracting and refining metals, developing glass, glass-ceramic, or traditional ceramic type materials using lunar soil simulants. In this paper we will present preliminary results on our effort on carbothermal reduction of oxides for elemental extraction and zone refining for obtaining high purity metals. In additions we will demonstrate the possibility of developing glasses from lunar soil simulant for fixing nuclear waste from potential nuclear power generators on planetary bodies. Compositional analysis, x-ray diffraction patterns and differential thermal analysis of processed samples will be presented.

  7. Design Exploration of Engineered Materials, Products, and Associated Manufacturing Processes

    NASA Astrophysics Data System (ADS)

    Shukla, Rishabh; Kulkarni, Nagesh H.; Gautham, B. P.; Singh, Amarendra K.; Mistree, Farrokh; Allen, Janet K.; Panchal, Jitesh H.

    2015-01-01

    In the past few years, ICME-related research has been directed towards the study of multi-scale materials design. However, relatively little has been reported on model-based methods that are of relevance to industry for the realization of engineered materials, products, and associated industrial manufacturing processes. Computational models used in the realization of engineered materials and products are fraught with uncertainty, have different levels of fidelity, are incomplete and are even likely to be inaccurate. In light of this, we adopt a robust design strategy that facilitates the exploration of the solution space thereby providing decision support to a design engineer. In this paper, we describe a foundational construct embodied in our method for design exploration, namely, the compromise Decision Support Problem. We introduce a problem that we are using to establish the efficacy of our method. It involves the integrated design of steel and gears, traversing the chain of steel making, mill production, and evolution of the material during these processes, and linking this to the mechanical design and manufacture of the gear. We provide an overview of our method to determine the operating set points for the ladle, tundish and caster operations necessary to manufacture steel of a desired set of properties. Finally, we highlight the efficacy of our method.

  8. Petroleum supply monthly with data for June 1997

    SciTech Connect

    1997-08-01

    Data presented in this publication describe the supply and disposition of petroleum products in the United states and major U.S. geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the U.S. The report includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. Both summary and detailed statistics are presented. 16 figs., 56 tabs.

  9. Petroleum supply monthly, with data from June 1996

    SciTech Connect

    1996-08-01

    The Petroleum Supply Division (PSD) of the Energy Information Administration (EIA) collects and published information on petroleum supply and disposition in the United States. The information is collected through a series of surveys that make up the Petroleum Supply Reporting System (PSRS). The PSRS data are published in the Weekly Petroleum Status Report (WPSR), Petroleum Supply Monthly (PSM), and Petroleum Supply Annual (PSA). This report presents information on crude oil production, crude oil imports and exports, refinery operations, natural gas processing, transportation, and oxygenate data.

  10. Study of the petroleum schedules thermal cleaning process from asphalt, ressin and paraffin deposits using low- temperature plasma

    NASA Astrophysics Data System (ADS)

    Samigullin, A. D.; Galiakbarov, A. T.; Galiakbarov, R. T.

    2016-01-01

    Petroleum industry uses large amount of pumping and compression pipes. Carrying out the whole range of repair works requires cleaning of the pipe inner surface from deposits which appeared in it during operation [1]. The task of asphalt, resin and paraffin deposits control remains one of the most essential for the branch. The article deals with thermal method and device for asphalt, resin and paraffin deposits removal from pumping and compression pipes inner surface, describes and provides the device application scope for cleaning the pumping and compression pipes inner surface. To deal with borehole equipment and pipe systems waxing problem various deposit prevention and removal methods are used, including mechanical, thermal, chemical, combined and nonconventional methods.

  11. Petroleum and Health Care: Evaluating and Managing Health Care's Vulnerability to Petroleum Supply Shifts

    PubMed Central

    Bednarz, Daniel; Bae, Jaeyong; Pierce, Jessica

    2011-01-01

    Petroleum is used widely in health care—primarily as a transport fuel and feedstock for pharmaceuticals, plastics, and medical supplies—and few substitutes for it are available. This dependence theoretically makes health care vulnerable to petroleum supply shifts, but this vulnerability has not been empirically assessed. We quantify key aspects of petroleum use in health care and explore historical associations between petroleum supply shocks and health care prices. These analyses confirm that petroleum products are intrinsic to modern health care and that petroleum supply shifts can affect health care prices. In anticipation of future supply contractions lasting longer than previous shifts and potentially disrupting health care delivery, we propose an adaptive management approach and outline its application to the example of emergency medical services. PMID:21778473

  12. Biostimulation of petroleum-hydrocarbon-contaminated marine sediment with co-substrate: involved metabolic process and microbial community.

    PubMed

    Zhang, Zhen; Lo, Irene M C

    2015-07-01

    This study investigated the effect of acetate and methanol as co-substrates on anaerobic biodegradation of total petroleum hydrocarbons (TPHs, C10-C40) in marine sediment. The findings evidenced that the degradation of TPH can be enhanced by adding acetate or methanol. The addition of acetate was generally more favorable than the addition of methanol for the TPH degradation. Both sulfate reduction and methanogenesis occurred in the acetate-treated sediment. However, the depletion of SO4 (2-) inhibited sulfate reduction over the incubation period. Only methanogenesis was prevalent in the methanol-treated sediment within the whole incubation period. The degradation of TPH fractions with higher carbon number ranges (C31-C40) was speculated to be more favored under sulfate-reducing condition, while TPH fractions with lower carbon number ranges (C10-C20) were preferentially degraded under methanogenic condition. The 16S rRNA clone library-based analysis revealed that the addition of different co-substrates led to distinct structures of the microbial community. Clones related to sulfate-reducing Desulfobacterales were the most abundant in the sediment dosed with acetate. Clones related to Clostridiales predominated in the sediment dosed with methanol. Acetoclastic methanogens were found to be the predominant archaeal species in the sediment dosed with acetate, while both acetoclastic methanogens and hydrogenotrophic methanogens accounted for large proportions in the sediment dosed with methanol. The results obtained in this study will contribute to more comprehensive knowledge on the role of acetate and methanol as co-substrates in biostimulation of petroleum-hydrocarbon-contaminated marine sediment.

  13. A new interpretation of the deep-part of Senegal-Mauritanian Basin in the Diourbel-Thies area by integrating seismic, magnetic, gravimetric and borehole data: Implication for petroleum exploration

    NASA Astrophysics Data System (ADS)

    Ndiaye, Matar; Ngom, Papa Malick; Gorin, Georges; Villeneuve, Michel; Sartori, Mario; Medou, Joseph

    2016-09-01

    The Diourbel-Thies area is located in the centre of the onshore part of the Senegal-Mauritanian Basin (SMB). The new interpretation of old petroleum data (2-D seismic lines and drilling data of three oil wells) in the deeppart of this poorly evaluated zone, integrating gravimetric and magnetic data, has allowed the distinction of the Hercynian ante-rift phase (U1) which is distinguished from the syn-rift phase (U2) probably of Permo-Triassic to Middle Jurassic age. The syn-rift phase resulted in a series of compartments or grabens infilling aligned in a North-South direction. Tholeiitic volcanism of the Central Atlantic Magmatic Province (CAMP) is present in the syn-rift phase of the Diourbel-Thies area. The syn-rift deposits and associated volcanics allow us to surmise that the Diourbel basin represents a deeper rift basin. In comparison with other Central Atlantic Margins (CAM), the Diourbel rift basin could be one of the numerous rift basins that formed during the Permo-Triassic age. From a petroleum exploration perspective, the existence of the Diourbel rift basin is attractive because of the presence of structures that are excellent for deep gas exploration.

  14. Application of Advanced Materials in Petroleum Engineering

    NASA Astrophysics Data System (ADS)

    Zhao, Gufan; Di, Weina; Wang, Minsheng

    With the background of increasing requirements on the petroleum engineering technology from more high demanding exploration targets, global oil companies and oil service companies are making more efforts on both R&D and application of new petroleum engineering technology. Advanced materials always have a decisive role in the functionality of a new product. Technology transplantation has become the important means of innovation in oil and gas industry. Here, we mainly discuss the properties and scope of application of several advanced materials. Based on the material requirements in petroleum engineering, we provide several candidates for downhole electronics protection, drilling fluid additives, downhole tools, etc. Based on the analysis of petroleum engineering technology characteristics, this paper made analysis and research on such advanced materials as new insulation materials, functional gradient materials, self-healing polymers, and introduced their application prospect in petroleum engineering in terms of specific characteristics.

  15. Petroleum Sector (NAICS 324)

    EPA Pesticide Factsheets

    Find relevant environmental regulations for the petroleum industry (NAICS 324), including National Emission Standards for Hazardous Air Pollutants (NESHAP)s for petroleum refineries and gasoline dispensing & effluent guidelines for oil and gas extraction

  16. Petroleum biodegradation in marine environments.

    PubMed

    Harayama, S; Kishira, H; Kasai, Y; Shutsubo, K

    1999-08-01

    Petroleum-based products are the major source of energy for industry and daily life. Petroleum is also the raw material for many chemical products such as plastics, paints, and cosmetics. The transport of petroleum across the world is frequent, and the amounts of petroleum stocks in developed countries are enormous. Consequently, the potential for oil spills is significant, and research on the fate of petroleum in a marine environment is important to evaluate the environmental threat of oil spills, and to develop biotechnology to cope with them. Crude oil is constituted from thousands of components which are separated into saturates, aromatics, resins and asphaltenes. Upon discharge into the sea, crude oil is subjected to weathering, the process caused by the combined effects of physical, chemical and biological modification. Saturates, especially those of smaller molecular weight, are readily biodegraded in marine environments. Aromatics with one, two or three aromatic rings are also efficiently biodegraded; however, those with four or more aromatic ring are quite resistant to biodegradation. The asphaltene and resin fractions contain higher molecular weight compounds whose chemical structures have not yet been resolved. The biodegradability of these compounds is not yet known. It is known that the concentrations of available nitrogen and phosphorus in seawater limit the growth and activities of hydrocarbon-degrading microorganisms in a marine environment. In other words, the addition of nitrogen and phosphorus fertilizers to an oil-contaminated marine environment can stimulate the biodegradation of spilled oil. This notion was confirmed in the large-scale operation for bioremediation after the oil spill from the Exxon Valdez in Alaska. Many microorganisms capable of degrading petroleum components have been isolated. However, few of them seem to be important for petroleum biodegradation in natural environments. One group of bacteria belonging to the genus

  17. Indigenous Precambrian petroleum revisited

    SciTech Connect

    Murray, G.E.; Kaczor, M.J.; McArthur, R.E.

    1980-10-01

    Irrefutable evidence of fossil remains from Precambrian sediments and proved petroleum reserves in upper Proterozoic (Riphean-Vendian) strata of the Irkutsk basin, USSR, suggest that unmetamorphosed Precambrian sedimentary rocks should be a focus for hydrocarbon exploration. Since 1965, a dramatic increase in publications which document worldwide occurrences of Precambrian life forms discloses that, by the end of the Proterozoic, organic evolution had produced diversified assemblages of relatively highly developed macroorganisms and microorganisms. Some of these organisms have generated crude oil in the Nonesuch Shale of northern Michigan and kerogen in stromatolitic carbonate rocks in Africa Kerogen has been extracted from approx. 2300-m.y. old Transvaal (Africa) stromatolitic limestone containing coccoid and complex filamentous cyanophytes. Also, aromatic and aliphatic hydrocarbons have been obtained from the approx. 2800-m.y. old Bulawayan stromatolitic limestone of Rhodesia. Additional evidence indicates that commercial reserves of petroleum from Precambrian strata are possible. An oil discovery in Lower Cambrian rocks in 1962, at Markovo in the Irkutsk basin of the Siberian platform area, led to four noncommercial and eight commercial fields producing from Lower Cambrian and Upper Proterozoic strata.

  18. Energy landscape exploration of the folding processes of biological molecules

    NASA Astrophysics Data System (ADS)

    Engel, Megan Clare

    For decades, scientists from every discipline have struggled to understand the mechanism of biological self-assembly, which allows proteins and nucleic acids to fold reliably into functional three-dimensional structures. Such an understanding may hold the key to eliminating diseases such as Alzheimer's and Parkinson's and to effective protein engineering. The current best framework for describing biological folding processes is that of statistical mechanical energy landscape theory, and one of the most promising experimental techniques for exploring molecular energy landscapes is single molecule force spectroscopy (SMFS), in which molecules are mechanically denatured. Theoretical advances have enabled the extraction of complete energy landscape profiles from SMFS data. Here, SMFS experiments performed using laser optical tweezers are analyzed to yield the first ever full landscape profile for an RNA pseudoknot. Further, a promising novel landscape reconstruction technique is validated for the first time using experimental data from a DNA hairpin.

  19. Petroleum system modeling capabilities for use in oil and gas resource assessments

    USGS Publications Warehouse

    Higley, Debra K.; Lewan, Michael; Roberts, Laura N.R.; Henry, Mitchell E.

    2006-01-01

    Summary: Petroleum resource assessments are among the most highly visible and frequently cited scientific products of the U.S. Geological Survey. The assessments integrate diverse and extensive information on the geologic, geochemical, and petroleum production histories of provinces and regions of the United States and the World. Petroleum systems modeling incorporates these geoscience data in ways that strengthen the assessment process and results are presented visually and numerically. The purpose of this report is to outline the requirements, advantages, and limitations of one-dimensional (1-D), two-dimensional (2-D), and three-dimensional (3-D) petroleum systems modeling that can be applied to the assessment of oil and gas resources. Primary focus is on the application of the Integrated Exploration Systems (IES) PetroMod? software because of familiarity with that program as well as the emphasis by the USGS Energy Program on standardizing to one modeling application. The Western Canada Sedimentary Basin (WCSB) is used to demonstrate the use of the PetroMod? software. Petroleum systems modeling quantitatively extends the 'total petroleum systems' (TPS) concept (Magoon and Dow, 1994; Magoon and Schmoker, 2000) that is employed in USGS resource assessments. Modeling allows integration of state-of-the-art analysis techniques, and provides the means to test and refine understanding of oil and gas generation, migration, and accumulation. Results of modeling are presented visually, numerically, and statistically, which enhances interpretation of the processes that affect TPSs through time. Modeling also provides a framework for the input and processing of many kinds of data essential in resource assessment, including (1) petroleum system elements such as reservoir, seal, and source rock intervals; (2) timing of depositional, hiatus, and erosional events and their influences on petroleum systems; (3) incorporation of vertical and lateral distribution and lithologies of

  20. Petroleum Technology: From Refinery To Home, Business, and Industry.

    ERIC Educational Resources Information Center

    Shewell, John A.

    1997-01-01

    Discusses the application of petroleum technology and presents activities designed to raise students' awareness of the importance of petroleum-based products in their lives. Includes a handout designed to help students understand the refining processes in which the crude oil from the drill site is transformed into nearly 6,000 petroleum-based…

  1. Petroleum Technology: From Refinery To Home, Business, and Industry.

    ERIC Educational Resources Information Center

    Shewell, John A.

    1997-01-01

    Discusses the application of petroleum technology and presents activities designed to raise students' awareness of the importance of petroleum-based products in their lives. Includes a handout designed to help students understand the refining processes in which the crude oil from the drill site is transformed into nearly 6,000 petroleum-based…

  2. Processing of Lunar Soil Simulant for Space Exploration Applications

    NASA Technical Reports Server (NTRS)

    Sen, Subhayu; Ray, C. S.; Ramachandran, N.

    2005-01-01

    NASA's long-term vision for space exploration includes developing human habitats and conducting scientific investigations on planetary bodies, especially on Moon and Mars. Processing and utilization of planetary in-situ resources is recognized as an important element of this vision since it can minimize the level of up-mass that will have to be transported from earth to the planetary bodies. Within this scope and context, we have undertaken a general effort aimed primarily at extracting and refining metals, developing glass, glass-ceramic, or traditional ceramic type materials using lunar soil simulants. In this paper we will present preliminary results on our effort on simultaneous carbothermal reduction of oxides for elemental extraction and zone refining for obtaining high purity metals. In additions we will demonstrate the possibility of developing glass fibers as reinforcement agents for planetary habitat construction, glasses for fixing nuclear waste from potential nuclear power generators, and glasses for magnetic applications. The paper will also include initial thermal characterization of the glasses produced from lunar simulant. Compositional analysis of processed samples will be presented.

  3. Ground Processing of Data From the Mars Exploration Rovers

    NASA Technical Reports Server (NTRS)

    Wright, Jesse; Sturdevant, Kathryn; Noble, David

    2006-01-01

    A computer program implements the Earth side of the protocol that governs the transfer of data files generated by the Mars Exploration Rovers. It also provides tools for viewing data in these files and integrating data-product files into automated and manual processes. It reconstitutes files from telemetry data packets. Even if only one packet is received, metadata provide enough information to enable this program to identify and use partial data products. This software can generate commands to acknowledge received files and retransmit missed parts of files, or it can feed a manual process to make decisions about retransmission. The software uses an Extensible Markup Language (XML) data dictionary to provide a generic capability for displaying files of basic types, and uses external "plug-in" application programs to provide more sophisticated displays. This program makes data products available with very low latency, and can trigger automated actions when complete or partial products are received. The software is easy to install and use. The only system requirement for installing the software is a Java J2SE 1.4 platform. Several instances of the software can be executed simultaneously on the same machine.

  4. Biological Remediation of Petroleum Contaminants

    NASA Astrophysics Data System (ADS)

    Kuhad, Ramesh Chander; Gupta, Rishi

    Large volumes of hazardous wastes are generated in the form of oily sludges and contaminated soils during crude oil transportation and processing. Although many physical, chemical and biological treatment technologies are available for petroleum contaminants petroleum contaminants in soil, biological methods have been considered the most cost-effective. Practical biological remediation methods typically involve direct use of the microbes naturally occurring in the contaminated environment and/or cultured indigenous or modified microorganisms. Environmental and nutritional factors, including the properties of the soil, the chemical structure of the hydrocarbon(s), oxygen, water, nutrient availability, pH, temperature, and contaminant bioavailability, can significantly affect the rate and the extent of hydrocarbon biodegradation hydrocarbon biodegradation by microorganisms in contaminated soils. This chapter concisely discusses the major aspects of bioremediation of petroleum contaminants.

  5. A safe, efficient and cost effective process for removing petroleum hydrocarbons from a highly heterogeneous and relatively inaccessible shoreline.

    PubMed

    Guerin, Turlough F

    2015-10-01

    A rocky, intractable and highly heterogeneous, intertidal zone, was contaminated from a diesel fuel spill that occurred during refuelling of a grader used in road construction, on an operational mine's shiploading facility. A practical, cost-effective, and safer (to personnel by avoiding drilling and earthworks), and non-invasive sampling and remediation strategy was designed and implemented since the location and nature of the impacted geology (rock fill) and sediment, precluded conventional ex-situ and any in-situ treatment where drilling would be required. Enhanced biostimulation with surfactant, available N & P (which were highly constrained), and increased aeration, increased the degradation rate from no discernable change for 2 years post-spill, to 170 mg/kg/day; the maximum degradation rate after intervention. While natural attenuation was ineffective in this application, the low-cost, biostimulation intervention proved successful, allowing the site owner to meet their regulatory obligations. Petroleum hydrocarbons (aliphatic fraction) decreased from ∼20,000 mg/kg to <200 mg/kg at the completion of 180 weeks of treatment. Copyright © 2015 Elsevier Ltd. All rights reserved.

  6. Interactive chemistry of coal-petroleum processing: Quarterly progress report for June 16, 1987-September 15, 1987

    SciTech Connect

    Curtis, C.W.; Guin, J.A.; Tarrer, A.R.

    1987-01-01

    The thermal and catalytic chemistry of napthalene, indan, indene, benzothiophene, o-cresol, benzofuran and quinoline has been investigated to help elucidate the reactions occurring during the coprocessing of coal and petroleum. Hydrogenation reactions were conducted. Three sets of reactions were performed: thermal, thermal with sulfur and catalytic with Mo naphthenate as an oil-soluble catalyst precursor and added sulfur to generate the catalyst in situ. A reaction temperature of 380/sup 0/C and a hydrogen atmosphere of 1250 psig (cold) were used. Analysis of the solids generated from Mo naphthenate and sulfur amorphous and poorly crystalline molybdenum sulfide, most probably MoS/sub 2/; however, the exact stoichiometry is inknown. The thermal reaction was performed as a baseline and to evaluate the thermal interactions among the various hydrocarbon and heteroatomic species; the thermal reaction with sulfur was performed to ascertain the effect of excess sulfur on the system since the catalytic system required excess sulfur to form the in situ generated catalyst; and the catalytic reaction was performed to determine the interactive chemistry of the hydrocarbons and heteroatomic species under catalytic coprocessing conditions. 13 refs., 14 figs., 10 tabs.

  7. Petroleum marketing monthly

    SciTech Connect

    1995-11-01

    The Petroleum Marketing Monthly (PMM) provides information and statistical data on a variety of crude oils and refined petroleum products. The publication presents statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the f.o.b. and landed cost of imported crude oil, and the refiners` acquisition cost of crude oil. Refined petroleum product sales data include motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane. The Petroleum Marketing Division, Office of Oil and Gas, Energy Information Administration ensures the accuracy, quality, and confidentiality of the published data.

  8. Removal of organic compounds and trace metals from oil sands process-affected water using zero valent iron enhanced by petroleum coke.

    PubMed

    Pourrezaei, Parastoo; Alpatova, Alla; Khosravi, Kambiz; Drzewicz, Przemysław; Chen, Yuan; Chelme-Ayala, Pamela; Gamal El-Din, Mohamed

    2014-06-15

    The oil production generates large volumes of oil sands process-affected water (OSPW), referring to the water that has been in contact with oil sands or released from tailings deposits. There are concerns about the environmental impacts of the release of OSPW because of its toxicity. Zero valent iron alone (ZVI) and in combination with petroleum coke (CZVI) were investigated as environmentally friendly treatment processes for the removal of naphthenic acids (NAs), acid-extractable fraction (AEF), fluorophore organic compounds, and trace metals from OSPW. While the application of 25 g/L ZVI to OSPW resulted in 58.4% removal of NAs in the presence of oxygen, the addition of 25 g petroleum coke (PC) as an electron conductor enhanced the NAs removal up to 90.9%. The increase in ZVI concentration enhanced the removals of NAs, AEF, and fluorophore compounds from OSPW. It was suggested that the electrons generated from the oxidation of ZVI were transferred to oxygen, resulting in the production of hydroxyl radicals and oxidation of NAs. When OSPW was de-oxygenated, the NAs removal decreased to 17.5% and 65.4% during treatment with ZVI and CZVI, respectively. The removal of metals in ZVI samples was similar to that obtained during CZVI treatment. Although an increase in ZVI concentration did not enhance the removal of metals, their concentrations effectively decreased at all ZVI loadings. The Microtox(®) bioassay with Vibrio fischeri showed a decrease in the toxicity of ZVI- and CZVI-treated OSPW. The results obtained in this study showed that the application of ZVI in combination with PC is a promising technology for OSPW treatment.

  9. PETROLEUM BIOREFINING FOR POLLUTION PREVENTION

    SciTech Connect

    John J. Kilbane II

    2002-03-01

    The objective of this project was to isolate and characterize thermophilic bacterial cultures that can be used for the selective removal of nitrogen, sulfur, and/or metals in the biorefining of petroleum. The project was completed on schedule and no major difficulties were encountered. Significant progress was made on multiple topics relevant to the development of a petroleum biorefining process capable of operating at thermophilic temperatures. New cultures capable of selectively cleaving C-N or C-S bonds in molecules relevant to petroleum were obtained, and the genes encoding the enzymes for these unique biochemical reactions were cloned and sequenced. Genetic tools were developed that enable the use of Thermus thermophilus as a host to express any gene of interest, and information was obtained regarding the optimum conditions for the growth of T. thermophilus. The development of a practical biorefining process still requires further research and the future research needs identified in this project include the development of new enzymes and pathways for the selective cleavage of C-N or C-S bonds that have higher specific activities, increased substrate range, and are capable of functioning at thermophilic temperatures. Additionally, there is a need for process engineering research to determine the maximum yield of biomass and cloned gene products that can be obtained in fed-batch cultures using T. thermophilus, and to determine the best configuration for a process employing biocatalysts to treat petroleum.

  10. Processes of Curiosity and Exploration in Preschool Disadvantaged Children.

    ERIC Educational Resources Information Center

    Minuchin, Patricia

    This study was created primarily to explore new techniques and to generate fruitful new hypotheses and procedures for the (1) description of variations in expressed curiosity and constructive exploration among disadvantaged preschool children and (2) assessment of the relationship between such curiosity and exploration and other aspects of the…

  11. Petroleum marketing annual 1994

    SciTech Connect

    1995-08-24

    The Petroleum Marketing Annual (PMA) provides information and statistical data on a variety of crude oils and refined petroleum products. The publication presents statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysis, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the fob and landed cost of imported crude oil, and the refiners` acquisition cost of crude oil. Refined petroleum product sales data include motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane. The Petroleum Marketing Division, Office of Oil and Gas, Energy Information Administration ensures the accuracy, quality, and confidentiality of the published data in the Petroleum Marketing Annual. For this production, all estimates have been recalculated since their earlier publication in the Petroleum Marketing Monthly (PMM). These calculations made use of additional data and corrections that were received after the PMM publication date.

  12. REDUCING POWER PRODUCTION COSTS BY UTILIZING PETROLEUM COKE

    SciTech Connect

    Kevin C. Galbreath; Donald L. Toman; Christopher J. Zygarlicke

    1999-09-01

    Petroleum coke, a byproduct of the petroleum-refining process, is an attractive primary or supplemental fuel for power production primarily because of a progressive and predictable increase in the production volumes of petroleum coke (1, 2). Petroleum coke is most commonly blended with coal in proportions suitable to meet sulfur emission compliance. Petroleum coke is generally less reactive than coal; therefore, the cofiring of petroleum coke with coal typically improves ignition, flame stability, and carbon loss relative to the combustion of petroleum coke alone. Although petroleum coke is a desirable fuel for producing relatively inexpensive electrical power, concerns about the effects of petroleum coke blending on combustion and pollution control processes exist in the coal-fired utility industry (3). The Energy & Environmental Research Center (EERC) completed a 2-year technical assessment of petroleum coke as a supplemental fuel. A survey questionnaire was sent to seven electric utility companies that are currently cofiring coal and petroleum coke in an effort to solicit specific suggestions on research needs and fuel selections. An example of the letter and survey questionnaire is presented in Appendix A. Interest was expressed by most utilities in evaluating the effects of petroleum coke blending on grindability, combustion reactivity, fouling, slagging, and fly ash emissions control. Unexpectedly, concern over corrosion was not expressed by the utilities contacted. Although all seven utilities responded to the question, only two utilities, Northern States Power Company (NSP) and Ameren, sent fuels to the EERC for evaluation. Both utilities sent subbituminous coals from the Power River Basin and petroleum shot coke samples. Petroleum shot coke is produced unintentionally during operational upsets in the petroleum refining process. This report evaluates the effects of petroleum shot coke blending on grindability, fuel reactivity, fouling/slagging, and

  13. Multichannel seismic reflection surveys over the Antarctic continental margin relevant to petroleum resource studies: Chapter 5 in Antarctica as an exploration-hydrocarbon potential, geology, and hazards

    USGS Publications Warehouse

    Behrendt, John C.

    1990-01-01

    More than 100,000 km of marine multichannel seismic profiles have been acquired over the continental margin of Antarctica since 1976 by scientific research programs of Australia, Brazil, France, Italy, Japan, Norway, Poland, United Kingdom, United States, U.S.S.R. and West Germany. Although scientific results are reported for most of these data, they also are relevant to petroleum resource assessment. Because of the one or two orders of magnitude greater cost of standard land survey techniques in Antarctica compared with marine techniques in areas of open water, there will likely be no great amount of coverage on the interior of the Antarctic ice sheet. Despite this, several countries are experimenting in a research mode using land systems, and deep crustal reflection sur eys at carefully selected interior sites will probably be made soon.

  14. Natural analogs in the petroleum industry

    SciTech Connect

    Wood, J.R.

    1995-09-01

    This article describes the use of natural analogues in petroleum exploration and includes numerous geologic model descriptions which have historically been used in the prediction of geometries and location of oil and gas accumulations. These geologic models have been passed down to and used by succeeding generations of petroleum geologists. Some examples of these geologic models include the Allan fault-plane model, porosity prediction, basin modelling, prediction of basin compartmentalization, and diagenesis.

  15. Petroleum supply monthly, November 1996 with data for September 1996

    SciTech Connect

    1996-11-01

    Data presented in this report describes the supply and disposition of petroleum products in the US and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products fin the US (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the US. The tables and figures in the Summary Statistics section present a time series of selected petroleum data on a US level. The Detailed Statistics tables present statistics for the most current month available as well as year-to-date. 16 figs., 66 tabs.

  16. Petroleum supply monthly, December 1998 with data for October 1998

    SciTech Connect

    1998-12-01

    Data presented in the Petroleum Supply Monthly (PSM) describe the supply and disposition of petroleum products in the US and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the US (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the US. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics. 82 tabs.

  17. Petroleum supply monthly: September 1996, with data for July 1996

    SciTech Connect

    1996-09-01

    Data presented in this report describe the supply and disposition of petroleum products in the US and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the US (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the US. The tables and figures in the Summary Statistics section of the PSM present a time series of selected petroleum data on a US level. The Detailed Statistics tables of the PSM present statistics for the most current month available as well as year-to-date. 56 tabs.

  18. Arctic lake physical processes and regimes with implications for winter water availability and management in the national petroleum reserve alaska

    USGS Publications Warehouse

    Jones, Benjamin M.; Arp, C.D.; Hinkel, Kenneth M.; Beck, R.A.; Schmutz, J.A.; Winston, B.

    2009-01-01

    Lakes are dominant landforms in the National Petroleum Reserve Alaska (NPRA) as well as important social and ecological resources. Of recent importance is the management of these freshwater ecosystems because lakes deeper than maximum ice thickness provide an important and often sole source of liquid water for aquatic biota, villages, and industry during winter. To better understand seasonal and annual hydrodynamics in the context of lake morphometry, we analyzed lakes in two adjacent areas where winter water use is expected to increase in the near future because of industrial expansion. Landsat Thematic Mapper and Enhanced Thematic Mapper Plus imagery acquired between 1985 and 2007 were analyzed and compared with climate data to understand interannual variability. Measured changes in lake area extent varied by 0.6% and were significantly correlated to total precipitation in the preceding 12 months (p < 0.05). Using this relation, the modeled lake area extent from 1985 to 2007 showed no long-term trends. In addition, high-resolution aerial photography, bathymetric surveys, water-level monitoring, and lake-ice thickness measurements and growth models were used to better understand seasonal hydrodynamics, surface area-to-volume relations, winter water availability, and more permanent changes related to geomorphic change. Together, these results describe how lakes vary seasonally and annually in two critical areas of the NPRA and provide simple models to help better predict variation in lake-water supply. Our findings suggest that both overestimation and underestimation of actual available winter water volume may occur regularly, and this understanding may help better inform management strategies as future resource use expands in the NPRA. ?? 2008 Springer Science+Business Media, LLC.

  19. Arctic lake physical processes and regimes with implications for winter water availability and management in the National Petroleum Reserve Alaska.

    PubMed

    Jones, Benjamin M; Arp, Christopher D; Hinkel, Kenneth M; Beck, Richard A; Schmutz, Joel A; Winston, Barry

    2009-06-01

    Lakes are dominant landforms in the National Petroleum Reserve Alaska (NPRA) as well as important social and ecological resources. Of recent importance is the management of these freshwater ecosystems because lakes deeper than maximum ice thickness provide an important and often sole source of liquid water for aquatic biota, villages, and industry during winter. To better understand seasonal and annual hydrodynamics in the context of lake morphometry, we analyzed lakes in two adjacent areas where winter water use is expected to increase in the near future because of industrial expansion. Landsat Thematic Mapper and Enhanced Thematic Mapper Plus imagery acquired between 1985 and 2007 were analyzed and compared with climate data to understand interannual variability. Measured changes in lake area extent varied by 0.6% and were significantly correlated to total precipitation in the preceding 12 months (p < 0.05). Using this relation, the modeled lake area extent from 1985 to 2007 showed no long-term trends. In addition, high-resolution aerial photography, bathymetric surveys, water-level monitoring, and lake-ice thickness measurements and growth models were used to better understand seasonal hydrodynamics, surface area-to-volume relations, winter water availability, and more permanent changes related to geomorphic change. Together, these results describe how lakes vary seasonally and annually in two critical areas of the NPRA and provide simple models to help better predict variation in lake-water supply. Our findings suggest that both overestimation and underestimation of actual available winter water volume may occur regularly, and this understanding may help better inform management strategies as future resource use expands in the NPRA.

  20. Spatial Data Exploring by Satellite Image Distributed Processing

    NASA Astrophysics Data System (ADS)

    Mihon, V. D.; Colceriu, V.; Bektas, F.; Allenbach, K.; Gvilava, M.; Gorgan, D.

    2012-04-01

    Our society needs and environmental predictions encourage the applications development, oriented on supervising and analyzing different Earth Science related phenomena. Satellite images could be explored for discovering information concerning land cover, hydrology, air quality, and water and soil pollution. Spatial and environment related data could be acquired by imagery classification consisting of data mining throughout the multispectral bands. The process takes in account a large set of variables such as satellite image types (e.g. MODIS, Landsat), particular geographic area, soil composition, vegetation cover, and generally the context (e.g. clouds, snow, and season). All these specific and variable conditions require flexible tools and applications to support an optimal search for the appropriate solutions, and high power computation resources. The research concerns with experiments on solutions of using the flexible and visual descriptions of the satellite image processing over distributed infrastructures (e.g. Grid, Cloud, and GPU clusters). This presentation highlights the Grid based implementation of the GreenLand application. The GreenLand application development is based on simple, but powerful, notions of mathematical operators and workflows that are used in distributed and parallel executions over the Grid infrastructure. Currently it is used in three major case studies concerning with Istanbul geographical area, Rioni River in Georgia, and Black Sea catchment region. The GreenLand application offers a friendly user interface for viewing and editing workflows and operators. The description involves the basic operators provided by GRASS [1] library as well as many other image related operators supported by the ESIP platform [2]. The processing workflows are represented as directed graphs giving the user a fast and easy way to describe complex parallel algorithms, without having any prior knowledge of any programming language or application commands

  1. Exploring the process of a skin care team.

    PubMed

    Klingel, P

    1996-01-01

    In early 1994, the nursing department in a 153 bed acute care facility with a twenty bed short-term physical rehabilitation unit noticed that patients were developing nosocomial skin care problems at their facility. It was found that patients who returned to the facility within 31 days were at risk. A one-day, prevalence survey was conducted which revealed the presence of a high percentage of pressure ulcers among the patients surveyed. A group of nurses decided to institute a multidisciplinary team in an attempt to solve the skin care problems, which resulted in the formation of a Skin Care Team. The Skin Care Team sought to improve the appropriateness, effectiveness, and efficiency of delivering skin care to patients, as well as to improve the continuity of care among healthcare providers in the provision of skin care services. The following article was written by a member of the Skin Care Team. The concept of teamwork is defined and explored, and a description of the developmental process of a team, specifically a skin care team, is also provided.

  2. Exploring the geophysical signatures of microbial processes in the earth

    SciTech Connect

    Slater, L.; Atekwana, E.; Brantley, S.; Gorby, Y.; Hubbard, S. S.; Knight, R.; Morgan, D.; Revil, A.; Rossbach, S.; Yee, N.

    2009-05-15

    AGU Chapman Conference on Biogeophysics; Portland, Maine, 13-16 October 2008; Geophysical methods have the potential to detect and characterize microbial growth and activity in subsurface environments over different spatial and temporal scales. Recognition of this potential has resulted in the development of a new subdiscipline in geophysics called 'biogeophysics,' a rapidly evolving Earth science discipline that integrates environmental microbiology, geomicrobiology, biogeochemistry, and geophysics to investigate interactions that occur between the biosphere (microorganisms and their products) and the geosphere. Biogeophysics research performed over the past decade has confirmed the potential for geophysical techniques to detect microbes, microbial growth/biofilm formation, and microbe-mineral interactions. The unique characteristics of geophysical data sets (e.g., noninvasive data acquisition, spatially continuous properties retrieved) present opportunities to explore geomicrobial processes outside of the laboratory, at unique spatial scales unachievable with microbiological techniques, and possibly in remote environments such as the deep ocean. In response to this opportunity, AGU hosted a Chapman Conference with a mission to bring together geophysicists, biophysicists, geochemists, geomicrobiologists, and environmental microbiologists conducting multidisciplinary research with potential impact on biogeophysics in order to define the current state of the science, identify the critical questions facing the community, and generate a road map for establishing biogeophysics as a critical subdiscipline of Earth science research. For more information on the conference, see http://www.agu.org/meetings/chapman/2008/fcall/.

  3. Process improvement exploration: mapping multimedia production process to CMMI-DEV

    NASA Astrophysics Data System (ADS)

    Lim, ChienWin; Kamaruddin, Noraida; Daud, Nor Izyani; Zainal Osman, Zosipha

    2013-03-01

    Multimedia takes improvement of multiple computing technologies to incorporate data from a wide variety of resources, without involving users to know how and where the data is encoded and stored. By reason of Multimedia applications interact with users with numerous diverse techniques and incorporate into strong applications that greatly extend the range and strength of applications, the production process are often complicated and complex. Production of such applications requires both process- and product-based quality assurance. Apparently, there are no universally accepted technical production standards. Consequently, Multimedia applications have sometimes diminished the quality of the end product, increased costs, delayed completion and failure. The focus is on the mapping between the current practices of multimedia production process and one of universal process improvement framework, Capability Maturity Model Integration for Development (CMMI-DEV). It shows that how current practices of multimedia production process address the Engineering Process Areas of CMMI-DEV. For each of the relevant process areas, it then explores how current practices can contribute to achieve the specific goals of that process area. This is practical for organizations that have their plan-driven process based on the CMMI-DEV model and are planning to improve the current practices of multimedia production process or to assist organization to define an innovative multimedia production process cycle based on CMMI-DEV practices.

  4. Recent Advances in Petroleum Microbiology

    PubMed Central

    Van Hamme, Jonathan D.; Singh, Ajay; Ward, Owen P.

    2003-01-01

    Recent advances in molecular biology have extended our understanding of the metabolic processes related to microbial transformation of petroleum hydrocarbons. The physiological responses of microorganisms to the presence of hydrocarbons, including cell surface alterations and adaptive mechanisms for uptake and efflux of these substrates, have been characterized. New molecular techniques have enhanced our ability to investigate the dynamics of microbial communities in petroleum-impacted ecosystems. By establishing conditions which maximize rates and extents of microbial growth, hydrocarbon access, and transformation, highly accelerated and bioreactor-based petroleum waste degradation processes have been implemented. Biofilters capable of removing and biodegrading volatile petroleum contaminants in air streams with short substrate-microbe contact times (<60 s) are being used effectively. Microbes are being injected into partially spent petroleum reservoirs to enhance oil recovery. However, these microbial processes have not exhibited consistent and effective performance, primarily because of our inability to control conditions in the subsurface environment. Microbes may be exploited to break stable oilfield emulsions to produce pipeline quality oil. There is interest in replacing physical oil desulfurization processes with biodesulfurization methods through promotion of selective sulfur removal without degradation of associated carbon moieties. However, since microbes require an environment containing some water, a two-phase oil-water system must be established to optimize contact between the microbes and the hydrocarbon, and such an emulsion is not easily created with viscous crude oil. This challenge may be circumvented by application of the technology to more refined gasoline and diesel substrates, where aqueous-hydrocarbon emulsions are more easily generated. Molecular approaches are being used to broaden the substrate specificity and increase the rates and

  5. Future petroleum geologist: discussion

    SciTech Connect

    Davis, G.D.

    1987-07-01

    Robert R. Berg's (1986) article, ''The Future Petroleum Geologist,'' summarizes the findings of the 13-member AAPG Select Committee on The Future Petroleum Geologist appointed by President William L. Fisher in July 1985. While this undertaking is laudable, particularly considering present circumstance in the petroleum industry, the committee has apparently overlooked a vital aspect concerning the future knowledge requirements of the petroleum geologist. Specifically, the Select Committee makes no mention of the need for computer literacy in its list of educational training categories. Obviously, AAPG is well aware of both the interest in computers by its membership and the increasing need for training and familiarity in this discipline. The Select Committee on The Future Petroleum Geologist, while undertaking a difficult and potentially controversial task, has omitted an important aspect of the background requirements for generations of future petroleum geologists; the committee should consider an amendment to their recommendations to reflect this increasingly important field study.

  6. Petroleum marketing monthly

    SciTech Connect

    1995-08-01

    The Petroleum Marketing Monthly (PMM) provides information and statistical data on a variety of crude oils and refined petroleum products. The publication presents statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the f.o.b. and landed cost of imported crude oil, and the refiners` acquisition cost of crude oil. Refined petroleum product sales data include motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane. The Petroleum Marketing Division, Office of Oil and Gas, Energy Information Administration ensures the accuracy, quality, and confidentiality of the published data in the Petroleum Marketing Monthly.

  7. Petroleum marketing monthly

    SciTech Connect

    1996-02-01

    The Petroleum Marketing Monthly (PMM) provides information and statistical data on a variety of crude oils and refined petroleum products. The publication presents statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the f.o.b. and landed cost of imported crude oil, and the refiners acquisition cost of crude oil. Refined petroleum product sales data include motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane. The Petroleum Marketing Division, Office of Oil and Gas, Energy Information Administration ensures the accuracy, quality, and confidentiality of the published data in the Petroleum Marketing Monthly.

  8. Petroleum marketing monthly

    SciTech Connect

    1996-07-01

    Petroleum Marketing Monthly (PPM) provides information and statistical data on a variety of crude oils and refined petroleum products. The publication presents statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the f.o. b. and landed cost of imported crude oil, and the refiners` acquisition cost of crude oil. Refined petroleum product sales data include motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane. The Petroleum Marketing Division, Office of Oil and Gas, Energy Information Administration ensures the accuracy, quality, and confidentiality of the published data in the Petroleum Marketing Monthly.

  9. Direct determination of manganese in produced waters from petroleum exploration by Electrothermal Atomic Absorption Spectrometry using Ir-W as permanent modifier.

    PubMed

    Cassella, Ricardo J; Dos Reis, Luis Gustavo T; Santelli, Ricardo E; Oliveira, Eliane P

    2011-07-15

    This present work reports the development and evaluation of a method for the direct determination of manganese in waters extracted during petroleum exploitation by Electrothermal Atomic Absorption Spectrometry (ET AAS) using Ir-W as permanent modifier. These waters, usually called produced waters, contain a wide range of organic and inorganic substances and are characterized by their high salinity. In order to achieve suitable experimental conditions for the method application, studies about the effect of operational variables (chemical modifier, pyrolysis and atomization temperatures) were performed, as well as the establishment of convenient calibration strategy. The best results were verified when the temperatures of pyrolysis and atomization were 1000°C and 2300°C, respectively, and using Ir-W as permanent modifier. The results showed that manganese can be determined by the standard addition method or employing external calibration with standard solutions prepared in the same salinity of the samples (with NaCl). Three real samples with salinities varying between 74 and 84‰ were successfully analyzed by the developed procedure. The limits of detection and quantification were 0.24 and 0.80 μg L(-1), respectively, in purified water, and 0.34 and 1.1 μg L(-1), respectively, in 0.4 mol L(-1) NaCl medium (approximately 23‰ salinity). Copyright © 2011 Elsevier B.V. All rights reserved.

  10. Synthetic crude oil from petroleum waste materials

    SciTech Connect

    Schieffer, A.

    1994-12-31

    This report describes the VEBA-COMBI-Cracking (VCC) process for the conversion of petroleum derived wastes. It is a hydrogen addition technology which directly combines liquid phase hydrogenation with with an integrated catalytic hydrofinishing step. The main objective of the hydrogenation is to convert wastes such as waste plastics or vacuum residues into valuable hydrocarbons. The hydrocracking process converts petroleum residues at high conversion rates.

  11. Petroleum supply monthly, March 1999, with data for January 1999

    SciTech Connect

    1999-03-01

    The Petroleum Supply Monthly (PSM) is one of a family of four petroleum supply publications produced by the Petroleum Division within the Energy Information Administration (EIA) reflecting different levels of data timeliness and completeness. The other publications are the Weekly Petroleum Status Report (WPSR), the Winter Fuels Report, and the Petroleum Supply Annual (PSA). Data presented in the PSM describe the supply and disposition of petroleum products in the US and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the US (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the US. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics.

  12. BIODEGRADATION OF PETROLEUM-WASTE BY BIOSURFACTANT-PRODUCING BACTERIA

    SciTech Connect

    Brigmon, R; Grazyna A. Plaza, G; Kamlesh Jangid, K; Krystyna Lukasik, K; Grzegorz Nalecz-Jawecki, G; Topher Berry, T

    2007-05-16

    The degradation of petroleum waste by mixed bacterial cultures which produce biosurfactants: Ralstonia pickettii SRS (BP-20), Alcaligenes piechaudii SRS (CZOR L-1B), Bacillus subtilis (1'- 1a), Bacillus sp. (T-1) and Bacillus sp. (T'-1) was investigated. The total petroleum hydrocarbons were degraded substantially (91 %) by the mixed bacterial culture in 30 days (reaching up to 29 % in the first 72 h). Similarly, the toxicity of the biodegraded petroleum waste decreased 3 times after 30 days as compared to raw petroleum waste. Thus, the mixed bacterial strains effectively clean-up the petroleum waste and they can be used in other bioremediation processes.

  13. Exploration

    USGS Publications Warehouse

    Wilburn, D.R.

    1997-01-01

    This summary of international nonfuel mineral exploration activities for 1996 uses available data from literature, industry, and US Geological Survey (USGS) specialists. Data on exploration budgets by region and commodity are reported, significant mineral discoveries and exploration target areas are identified and government programs affecting the mineral exploration industry are discussed. Inferences and observations on minerals industry direction are drawn from these data.

  14. Petroleum geology of Arabian Peninsula

    SciTech Connect

    Billo, S.M.

    1982-05-01

    Petroleum activities in the Arabian Peninsula show new trends in the 1980s. Petroleum exploration is intensified and huge discoveries are anticipated. A giant Jurassic gas field along the coast of the Arabian Gulf discovered recently tops 150 tcf, the largest single reserve ever. Other giant oil fields in the area are undergoing expansion in development and productivity. Today, the Peninsula, with a total area that surpasses one million square miles, produces and exports more oil and gas and has greater reserves than any other area in the world. The excellent reservoir rocks are located in the Jurassic and Cretaceous formations between the Arabian Shield and the Tethyan Seaway. They represent porous and permeable marine cyclical beds sealed by impervious shales and anhydrites. Reservoir sedimentology was affected by 2 orogenies during late Cretaceous and Pliocene time portrayed by the Cratonic area to the southwest and the orthogeosynclinal area to the northeast. The eastern part was little deformed by these movements.

  15. Exploration

    USGS Publications Warehouse

    Wilburn, D.R.

    2001-01-01

    Part of an annual review of mines and mineral resources in the U.S. An overview of nonfuel-mineral exploration in 2000 is presented. Principal exploration target was gold exploration in Latin America, Australia, and the U.S. There was a decrease of 18 percent in the exploration budget for gold as compared with the budget for 1999. Statistical information on nonfuel-mineral exploration worldwide is presented, analyzed, and interpreted.

  16. Paleogene thrust tectonics in northwestern Venezuela: Petroleum system implications

    SciTech Connect

    Quijada, E.; Oropeza, S.

    1996-08-01

    Oil exploration in northeastern Perija Mountains, northwestern Maracaibo basin, has been difficult, mainly due to the various tectonic events that have strongly deformed this area. This study is an attempt at better understanding the effect of a Paleogene thrusting event on the petroleum system development in the area. Subsidence analysis interpretation at both sides of the NNE directed Tigre fault (which separates the northern Perija Mountains from the rest of the Maracaibo basin) suggests the onset of a foreland basin during, at least, Paleocene-Early Eocene time. Continuous sedimentation occurred from Late Cretaceous to Early Eocene, as long as it kept pace with subsidence, in the west block of the fault, while the east block acted as an obstacle against the thrust-sheet movement, delaying its subsidence. Sedimentation for this time is associated with a thick unit of mainly paralic sediments west of that fault and thinner continental (fluvial) to shallow marine sediments, with an intra-Paleocene/Early Eocene unconformity, east of it. So, this tectonic event, associated with convergence from the north, caused a south-verging thrust sheet giving rise to differences in the evolution of the petroleum system on both sides of the Tigre fault, mainly regarding the existence of source rocks and their generation/migration of hydrocarbons, preservation time and critical moment. Finally, in order to evaluate the oil exploration opportunities in northeastern Perija mountains, it is advisable that any integrated interpretation of the petroleum system processes (generation-migration-accumulation) take into account this tectonic event.

  17. Analysis of soils contaminated with petroleum constituents

    SciTech Connect

    O'Shay, T.A. ); Hoddinott, K. )

    1994-01-01

    This symposium was held in Atlanta, Georgia on June 24, 1993. The purpose of the symposium was to provide a forum for exchange of information on petroleum contaminated soils. When spilled on the ground, petroleum products can cause massive problems in the environment. In this Special Technical Publication (STP), papers were selected in two categories; the analytical procedures for soil contaminated with petroleum hydrocarbons and the behavior of hydrocarbon contaminated soils. Individual papers have been processed separately for inclusion in the appropriate data bases.

  18. Petroleum 1996: Issues and Trends

    EIA Publications

    1997-01-01

    Examines historical trends and focuses on major petroleum issues and the events they represent. It analyzes different dimensions of the petroleum industry and related markets in terms of how they relate to the volatility in petroleum markets.

  19. 2011, 2010 petroleum resource assessment of the National Petroleum Reserve in Alaska: GIS play maps

    USGS Publications Warehouse

    Garrity, Christopher P.; Houseknecht, David W.; Bird, Kenneth J.

    2011-01-01

    This report provides digital geographic information systems (GIS) files of maps for each of the 24 plays considered in the U.S. Geological Survey (USGS) 2010 updated petroleum resource assessment of the National Petroleum Reserve in Alaska (NPRA) (Houseknecht and others, 2010). These are the sample plays evaluated in a previous USGS assessment of the NPRA (Bird and Houseknecht, 2002a), maps of which were released in pdf format (Bird and Houseknecht, 2002b). The 2010 updated assessment of the NPRA evaluated each of the previously used 24 plays based on new geologic data available from exploration activities and scientific research. Quantitative assessments were revised for 11 plays, and no revisions were made for 9 plays. Estimates of the volume of technically recoverable, undiscovered oil, and nonassociated gas resources in these 20 plays are reported elsewhere (Houseknecht and others, 2010). Four plays quantitatively assessed in 2002 were eliminated from quantitative assessment for reasons explained by Houseknecht and others (2010). The NPRA assessment study area includes Federal and native onshore land and adjacent State offshore areas. A map showing the areal extent of each play was prepared by USGS geologists as a preliminary step in the assessment process. Boundaries were drawn on the basis of a variety of information, including seismic reflection data, results of exploration drilling, and regional patterns of rock properties. Play boundary polygons were captured by digitizing the play maps prepared by USGS geologists.

  20. Determining Important Nuclear Fragmentation Processes for Human Space Explorations

    NASA Technical Reports Server (NTRS)

    Lin, Zi-Wei

    2005-01-01

    Space radiation from cosmic ray particles is a major risk for astronauts in long-term human space explorations such as a permanent moon base or a trip to Mars. Radiation shielding is needed to reduce the radiation hazard to astronauts, and models have been developed in order to evaluate the effectiveness of different shielding materials. In this talk we determine the nuclear fragmentation cross sections which will most affect the radiation risk behind typical radiation shielding materials. As a result, these cross sections need more theoretical studies and accurate experimental measurements in order for us to more precisely predict the radiation risk in human space explorations.

  1. Determining Important Nuclear Fragmentation Processes for Human Space Explorations

    NASA Technical Reports Server (NTRS)

    Lin, Zi-Wei

    2005-01-01

    Space radiation from cosmic ray particles is a major risk for astronauts in long-term human space explorations such as a permanent moon base or a trip to Mars. Radiation shielding is needed to reduce the radiation hazard to astronauts, and models have been developed in order to evaluate the effectiveness of different shielding materials. In this talk we determine the nuclear fragmentation cross sections which will most affect the radiation risk behind typical radiation shielding materials. As a result, these cross sections need more theoretical studies and accurate experimental measurements in order for us to more precisely predict the radiation risk in human space explorations.

  2. Quest for Accountability: Exploring the Evaluation Process of Universities

    ERIC Educational Resources Information Center

    Minelli, Eliana; Rebora, Gianfranco; Turri, Matteo

    2015-01-01

    The article explores the organisational impact of evaluation and control mechanisms on universities from the point of view of accountability. Three case studies are analysed with the aim of understanding the significance of these systems both at corporate governance level and in relation to their influence on the behaviour of the academic staff.…

  3. Touch: An Exploration of Its Role in the Counseling Process.

    ERIC Educational Resources Information Center

    Guy, Kathleen C.

    1987-01-01

    Explores the efficacy of touch in the counseling situation by examining the importance of tactile communication in human development, the impact of socialization and cultural factors on the meanings of touch, and clinical and research evidence relevant to the use of touch in therapeutic settings. Suggests guidelines for the use of touch in…

  4. Quest for Accountability: Exploring the Evaluation Process of Universities

    ERIC Educational Resources Information Center

    Minelli, Eliana; Rebora, Gianfranco; Turri, Matteo

    2015-01-01

    The article explores the organisational impact of evaluation and control mechanisms on universities from the point of view of accountability. Three case studies are analysed with the aim of understanding the significance of these systems both at corporate governance level and in relation to their influence on the behaviour of the academic staff.…

  5. Touch: An Exploration of Its Role in the Counseling Process.

    ERIC Educational Resources Information Center

    Guy, Kathleen C.

    1987-01-01

    Explores the efficacy of touch in the counseling situation by examining the importance of tactile communication in human development, the impact of socialization and cultural factors on the meanings of touch, and clinical and research evidence relevant to the use of touch in therapeutic settings. Suggests guidelines for the use of touch in…

  6. Exploring Processes Linking Shyness and Academic Achievement in Childhood

    ERIC Educational Resources Information Center

    Hughes, Kathleen; Coplan, Robert J.

    2010-01-01

    The goal of the current study was to explore the relations between shyness, academic engagement, and academic achievement in childhood. Participants were (n = 125) children (aged 9-13 years) attending public school boards in Canada. Children completed self reports of shyness and were administered a test of nonverbal IQ. Academic achievement was…

  7. Geostatistics and petroleum geology

    SciTech Connect

    Hohn, M.E.

    1988-01-01

    The book reviewed is designed as a practical guide to geostatistics or kriging for the petroleum geologists. The author's aim in the book is to explain geostatistics as a working tool for petroleum geologists through extensive use of case-study material mostly drawn from his own research in gas potential evaluation in West Virginia. Theory and mathematics are pared down to immediate needs.

  8. Fundamentals of Petroleum.

    ERIC Educational Resources Information Center

    Bureau of Naval Personnel, Washington, DC.

    Basic information on petroleum is presented in this book prepared for naval logistics officers. Petroleum in national defense is discussed in connection with consumption statistics, productive capacity, world's resources, and steps in logistics. Chemical and geological analyses are made in efforts to familiarize methods of refining, measuring,…

  9. Exploration

    USGS Publications Warehouse

    Wilburn, D.R.

    2000-01-01

    This summary of international nonfuel mineral exploration activities for 1999 draws upon available data from literature, industry and US Geological Survey (USGS) specialists. The report documents data on exploration budgets by region and commodity and identifies significant mineral discoveries and exploration target areas. It also discusses government programs affecting the mineral exploration industry. And it presents inferences and observations on mineral industry direction based on these data and discussions.

  10. Exploration

    USGS Publications Warehouse

    Wilburn, D.R.

    1998-01-01

    This summary of international nonfuel mineral exploration activities for 1997 draws upon available data from literature, industry and US Geological Sulvey (USGS) specialists. Data on exploration budgets by region and commodity are reported, significant mineral discoveries and exploration target areas are identified and government programs affecting the mineral exploration industry are discussed. Inferences and observations on mineral industry direction are drawn from these data and discussions.

  11. Exploration

    USGS Publications Warehouse

    Wilburn, D.R.; Porter, K.E.

    1999-01-01

    This summary of international nonfuel mineral exploration activities for 1998 draws on available data from literature, industry and US Geological Survey (USGS) specialists. Data on exploration budgets by region and commodity are reported, significant mineral discoveries and exploration target areas are identified and government programs affecting the mineral exploration industry are discussed. Inferences and observations on mineral industry direction are drawn from these data and discussions.

  12. Petroleum supply monthly, August 1995 with data for June 1995

    SciTech Connect

    1995-08-25

    Data presented in the PSM describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics.

  13. Petroleum supply monthly, March 1995 with data for January 1995

    SciTech Connect

    1995-03-30

    Data presented in this report for March 1995, describes the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States.

  14. Process development for the separation and recovery of Mo and Co from chloride leach liquors of petroleum refining catalyst by solvent extraction.

    PubMed

    Banda, Raju; Sohn, Seong Ho; Lee, Man Seung

    2012-04-30

    The separation and recovery of Mo and Co from the synthetic chloride leach liquors of petroleum refining catalyst has been investigated by employing TOPO and Alamine 308 as extractants. The synthetic leach liquor contained Mo 394 mg/L, Al 1782 mg/L, Co 119 mg/L in 3 M HCl. The separation of Mo from Co and Al was achieved with 0.05 M TOPO in Escaid 110 and complete stripping of Mo was attained with combination of 0.1M NH(4)OH and 0.05 M (NH(4))(2)CO(3). After separation of molybdenum, cobalt can be selectively extracted by Alamine 308 from Mo free raffinate after adjusting the concentration of chloride ion to 5 M by adding AlCl(3). The back-extraction of cobalt was obtained easily from loaded Alamine 308 with acidified water (pH=1.0). McCabe-Thiele diagrams were constructed from the extraction and stripping experiments of each element (Mo and Co). From the batch simulation of the counter-current extraction and stripping experiments, it was confirmed that Mo and Co recovery of 99.4% and 99.1% respectively was obtained from the synthetic leach liquor of the chloride solutions. Finally a hydrometallurgical process flow sheet was developed.

  15. Environmental analysis of plastic production processes: comparing petroleum-based polypropylene and polyethylene with biologically-based poly-beta-hydroxybutyric acid using life cycle analysis.

    PubMed

    Harding, K G; Dennis, J S; von Blottnitz, H; Harrison, S T L

    2007-05-31

    Polymers based on olefins have wide commercial applicability. However, they are made from non-renewable resources and are characterised by difficulty in disposal where recycle and re-use is not feasible. Poly-beta-hydroxybutyric acid (PHB) provides one example of a polymer made from renewable resources. Before motivating its widespread use, the advantages of a renewable polymer must be weighed against the environmental aspects of its production. Previous studies relating the environmental impacts of petroleum-based and bio-plastics have centred on the impact categories of global warming and fossil fuel depletion. Cradle-to-grave studies report equivalent or reduced global warming impacts, in comparison to equivalent polyolefin processes. This stems from a perceived CO(2) neutral status of the renewable resource. Indeed, no previous work has reported the results of a life cycle assessment (LCA) giving the environmental impacts in all major categories. This study investigates a cradle-to-gate LCA of PHB production taking into account net CO(2) generation and all major impact categories. It compares the findings with similar studies of polypropylene (PP) and polyethylene (PE). It is found that, in all of the life cycle categories, PHB is superior to PP. Energy requirements are slightly lower than previously observed and significantly lower than those for polyolefin production. PE impacts are lower than PHB values in acidification and eutrophication.

  16. Effect of the ultrasound-Fenton oxidation process with the addition of a chelating agent on the removal of petroleum-based contaminants from soil.

    PubMed

    Li, Ying; Li, Fangmin; Li, Fanxiu; Yuan, Fuqian; Wei, Pingfang

    2015-12-01

    The effects of ultrasonic irradiation, the chelating agent modified Fenton reaction, and a combination of ultrasound and the Fenton method in removing petroleum contaminants from a soil were studied. The results showed that the contaminant removal rate of the Fenton treatment combined with an oxalic acid chelating agent was 55.6% higher than that without a chelating agent. The average removal rate of the contaminants using the ultrasound-Fenton treatment was 59.0% higher than that without ultrasonic treatment. A combination of ultrasound and an Fe(2+)/Fe(3+)-oxalate complex-modified Fenton reagent resulted in significantly higher removal rates of n-alkanes (C(n)H(2n+2), n < 28), isoprenoid hydrocarbons, aromatic hydrocarbons, and saturated polycyclic terpenes compared with the ultrasound treatment alone or the Fenton method. The Fenton reaction and the ultrasound-Fenton treatment can unselectively remove multiple components of residual hydrocarbons and a number of benzene rings in polycyclic aromatic hydrocarbons. The chemistry of the heterocyclic compounds and the position and number of substituents can affect the degradation process.

  17. Petroleum supply monthly, with data for September 1995

    SciTech Connect

    1995-11-01

    The Petroleum Supply Monthly (PSM) is one of a family of four publications produced by the Petroleum Supply Division within the Energy Information Administration (EIA) reflecting different levels of data timeliness and completeness. The other publications are the Weekly Petroleum Status Report (WPSR), the Winter Fuels Report, and the Petroleum Supply Annual (PSA). Data presented in the PSM describe the supply and disposition of petroleum products in the United States and major U.S. geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States.

  18. Petroleum supply monthly, September 1995 with data for July 1995

    SciTech Connect

    1995-09-27

    The Petroleum Supply Monthly (PSM) is one of a family of four publications produced by the Petroleum Supply Division within the Energy Information Administration (EIA) reflecting different levels of data timeliness and completeness. The other publications are the Weekly Petroleum Status Report (WPSR), the Winter Fuels Report, and the Petroleum Supply Annual (PSA). Data presented in the PSM describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics.

  19. Petroleum supply monthly with data from April 1996

    SciTech Connect

    1996-06-01

    The Petroleum Supply Monthly (PSM) is one of a family of four publications produced by the Petroleum Supply Division within the Energy Information Administration (EIA) reflecting different levels of data timeliness and completeness. The other publications are the Weekly Petroleum Status Report (WPSR), the Winter Fuels Report, and the Petroleum Supply Annual (PSA). Data presented in the PSM describe the supply and disposition of petroleum products in the United States and major U.S. geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States.

  20. Petroleum supply monthly, July 1995 with data for May 1995

    SciTech Connect

    1995-07-27

    The Petroleum Supply Monthly (PSM) is one of a family of four publications produced by the Petroleum Supply Division within the Energy Information Administration (EIA) reflecting different levels of data timeliness and completeness. The other publications are the Weekly Petroleum Status Report (WPSR), the Winter Fuels Report, and the Petroleum Supply Annual (PSA). Data presented in the PSM describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics.

  1. Petroleum Supply Monthly, September 1998, with data for July 1998

    SciTech Connect

    1998-09-28

    The Petroleum Supply Monthly (PSM) is one of a family of four publications produced by the Petroleum Division within the Energy Information Administration (EIA) reflecting different levels of data timeliness and completeness. The other publications are the Weekly Petroleum Status Report WPSR), the Winter Fuels Report, and the Petroleum Supply Annual (PSA). Data presented in the PSM describe the suppiy and disposition of petroleum products in the United States and major U.S. geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics

  2. Petroleum supply monthly, June 1995 with data for April 1995

    SciTech Connect

    1995-06-28

    The Petroleum Supply Monthly (PSM) is one of a family of four publications produced by the Petroleum Supply Division within the Energy Information Administration (EIA) reflecting different levels of data timeliness and completeness. The other publications are the Weekly Petroleum Status Report (WPSR), the Winter Fuels Report, and the Petroleum Supply Annual (PSA). Data presented in the PSM describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics.

  3. Petroleum Supply Monthly, March 1996 (with data for January 1996)

    SciTech Connect

    1996-04-04

    The Petroleum Supply Monthly (PSM) is one of a family of four publications produced by the Petroleum Supply Division within the Energy Information Administration (EIA) reflecting different levels of data timeliness and completeness. The other publications are the Weekly Petroleum Status Report (WPSR), the Winter Fuels Report, and the Petroleum Supply Annual (PSA). Data presented in the PSM describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics.

  4. Petroleum supply monthly - with data for May 1996

    SciTech Connect

    1996-07-01

    The Petroleum Supply Monthly (PSM) is one of a family of four publications produced by the Petroleum Supply Division within the Energy Information Administration (EIA) reflecting different levels of data timeliness and completeness. The other publications are the Weekly Petroleum Status Report (WPSR), the Winter Fuels Report, and the Petroleum Supply Annual (PSA). Data presented in the PSM describe the supply and disposition of petroleum products in the United States and major U.S. geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States. This document contains a glossary.

  5. Petroleum supply monthly, May 1995 with data for March 1995

    SciTech Connect

    1995-05-25

    The Petroleum Supply Monthly (PSM) is one of a family of four publications produced by the Petroleum Supply Division within the Energy Information Administration (EIA) reflecting different levels of data timeliness and completeness. The other publications are the Weekly Petroleum Status Report (WPSR), the Winter Fuels Report, and the Petroleum Supply Annual (PSA). Data presented in the PSM describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States.Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics.

  6. Petroleum supply monthly, with data for August 1996

    SciTech Connect

    1996-10-01

    The Petroleum Supply Monthly (PSM) is one of a family of four publications produced by the Petroleum Supply Division within the Energy Information Administration (EIA) reflecting different levels of data timeliness and completeness. The other publications are the Weekly Petroleum Status Report (WPSR), the Winter Fuels Report, and the Petroleum Supply Annual (PSA). Data presented in the PSM describe the supply and disposition of petroleum products in the United States and major U.S. geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States.

  7. Alaskan Manpower and the Petroleum-Related Workforce.

    ERIC Educational Resources Information Center

    Bland, Laurel L.

    This article, in two parts, presents information as a foundation for an integrated approach to utilization and employment of Alaskan manpower in the construction and maintenance of the trans-Alaska pipeline, and the continuing exploration and development of the petroleum fields. The four primary manpower sources for petroleum related employment in…

  8. China's petroleum reserves

    NASA Astrophysics Data System (ADS)

    Bell, Peter M.

    Perhaps because of declining yields inland, the People's Republic of China has moved to its storm-ridden coast to develop additional petroleum reserves. During 1979 and 1980, 44 foreign oil-exploration companies engaged in what has been termed the world's record “seismic shoot” over 411,000 km2 extending from the Yellow Sea through the South China Sea, and including Beibu Wan (Gulf of Tonkin), the bay lying east of Hanoi and west of Hainan Island. These offshore oil reserves are estimated to be 40-100 billion barrels.The seas off the mainland are relatively shallow (most drilling has been done in less than 100 m) but they are stormy. According to a recent description, “Typhoons can … occur in the area at almost any time of the year, and the strong winds (160 km h-1 or more) which they generate frequently wreak havoc in the Philippines, Vietnam, China, and occasionally, Hong Kong. Typhoon Vera, which hit southern China in late July, did immense damage and claimed dozens of lives. The main implications for oil operation naturally relate to rig design and safety measures but onshore facilities will also have to be designed accordingly” (New Scientist, Sept. 8, 1983).

  9. Exploration

    USGS Publications Warehouse

    Wilburn, D.R.

    2005-01-01

    The worldwide budget for nonferrous, nonfuel mineral exploration was expected to increase by 58 percent in 2004 from the 2003 budget, according to Metals Economics Group (MEG) of Halifax, Nova Scotia. The increase comes two years after a five-year period of declining spending for mineral exploration (1998 to 2002). Figures suggest a subsequent 27 percent increase in budgeted expenditures from 2002 to 2003. For the second consecutive year, all regional exploration budget estimates were anticipated to increase.

  10. Combination of surfactant enhanced soil washing and electro-Fenton process for the treatment of soils contaminated by petroleum hydrocarbons.

    PubMed

    Huguenot, David; Mousset, Emmanuel; van Hullebusch, Eric D; Oturan, Mehmet A

    2015-04-15

    In order to improve the efficiency of soil washing treatment of hydrocarbon contaminated soils, an innovative combination of this soil treatment technique with an electrochemical advanced oxidation process (i.e. electro-Fenton (EF)) has been proposed. An ex situ soil column washing experiment was performed on a genuinely diesel-contaminated soil. The washing solution was enriched with surfactant Tween 80 at different concentrations, higher than the critical micellar concentration (CMC). The impact of soil washing was evaluated on the hydrocarbons concentration in the leachates collected at the bottom of the soil columns. These eluates were then studied for their degradation potential by EF treatment. Results showed that a concentration of 5% of Tween 80 was required to enhance hydrocarbons extraction from the soil. Even with this Tween 80 concentration, the efficiency of the treatment remained very low (only 1% after 24 h of washing). Electrochemical treatments performed thereafter with EF on the collected eluates revealed that the quasi-complete mineralization (>99.5%) of the hydrocarbons was achieved within 32 h according to a linear kinetic trend. Toxicity was higher than in the initial solution and reached 95% of inhibition of Vibrio fischeri bacteria measured by Microtox method, demonstrating the presence of remaining toxic compounds even after the complete degradation. Finally, the biodegradability (BOD₅/COD ratio) reached a maximum of 20% after 20 h of EF treatment, which is not enough to implement a combined treatment with a biological treatment process.

  11. Exploring a Phonological Process Approach to Adult Pronunciation Training

    PubMed Central

    McDaniel, Lana

    2016-01-01

    Purpose The production of speech sound classes in adult language learners is affected by (a) interference between the native language and the target language and (b) speaker variables such as time speaking English. In this article, we demonstrate how phonological process analysis, an approach typically used in child speech, can be used to characterize adult target language phonological learning. Method Sentences produced by 2 adult Japanese English language learners were transcribed and coded for phoneme accuracy and analyzed according to the percent occurrence of phonological processes. The results were interpreted relative to a contrastive analysis between Japanese and English phonetic inventories and developmental norms for monolingual English children. Results In this pilot study, common consonant processes included vocalization, final consonant devoicing, and cluster reduction. These are processes commonly observed in the speech of children who are typically developing. Conclusions The process analysis can inform clinical approaches to pronunciation training in adult English language learners. For example, the cycles approach (Hodson & Paden, 1981) may provide more clinical efficacy than an articulatory approach in which phonemes are targeted individually. In addition, a process analysis can enable clinicians to examine the principles of within-class and across-class generalization in adult pronunciation instruction. PMID:27151825

  12. Eastern Europe: Former Soviet Union, Humpty Dumpty still on its fall. [Petroleum and natural gas exploration and development in the former Soviet Union

    SciTech Connect

    Khartukov, E.M. ); Vinogradova, O.V.

    1993-08-01

    This paper reviews the oil and gas exploration and development activities in the former Soviet Union on a republic by republic basis. It gives figures on new well drilling activities (footage and numbers of new wells), locations of this activity, and production. The paper concentrates on the effects of the Soviet Union break-up on the availability of supplies and markets and the associated logistical headaches which resulted. The paper also briefly discusses activities in Bulgaria, Czech Republic, and Slovenia.

  13. Exploring Group Communication and Productivity Improvement: Using an Experiential Process.

    ERIC Educational Resources Information Center

    Mandeville, Mary Y.; Mandeville, David E.

    Engineering students at Oklahoma State University used an experiential process (the ACME Basket Exercise) to develop an understanding of how quality and productivity can be improved. The exercise simulates a traditional production organization in the classroom and mirrors the efforts, the successes, and the frustrations of individuals and work…

  14. A mental models approach to exploring perceptions of hazardous processes

    SciTech Connect

    Bostrom, A.H.H.

    1990-01-01

    Based on mental models theory, a decision-analytic methodology is developed to elicit and represent perceptions of hazardous processes. An application to indoor radon illustrates the methodology. Open-ended interviews were used to elicit non-experts' perceptions of indoor radon, with explicit prompts for knowledge about health effects, exposure processes, and mitigation. Subjects then sorted photographs into radon-related and unrelated piles, explaining their rationale aloud as they sorted. Subjects demonstrated a small body of correct but often unspecific knowledge about exposure and effects processes. Most did not mention radon-decay processes, and seemed to rely on general knowledge about gases, radioactivity, or pollution to make inferences about radon. Some held misconceptions about contamination and health effects resulting from exposure to radon. In two experiments, subjects reading brochures designed according to the author's guidelines outperformed subjects reading a brochure distributed by the EPA on a diagnostic test, and did at least as well on an independently designed quiz. In both experiments, subjects who read any one of the brochures had more complete and correct knowledge about indoor radon than subjects who did not, whose knowledge resembled the radon-interview subjects'.

  15. Defining Forgiveness: An Empirical Exploration of Process and Role.

    ERIC Educational Resources Information Center

    Denton, Roy T.; Martin, Michael W.

    1998-01-01

    Assesses a sample of experienced clinicians for their perceptions of the definition of forgiveness, the steps in the process, and appropriate therapeutic usage. Statistical analysis within and between groups yields clear guidelines for therapeutic and research purposes. Treatment suggestions and directions for future research are explicated.…

  16. Adaptation to Work: An Exploration of Processes and Outcomes.

    ERIC Educational Resources Information Center

    Ashley, William L.; And Others

    A study of adaptation to work as both a process and an outcome was conducted. The study was conducted by personal interview that probed adaptation with respect to work's organizational, performance, interpersonal, responsibility, and affective aspects; and by questionnaire using the same aspects. The population studied consisted of persons without…

  17. Children's Metacognition: Exploring Relations among Knowledge, Process, and Motivational Variables

    ERIC Educational Resources Information Center

    Kurtz, Beth E.; Borkowski, John G.

    1984-01-01

    A total of 60 first- and third-grade children were divided into three treatment groups receiving task-specific strategy instructions and/or metacognitive training. Results were discussed in terms of the interactive nature of knowledge, process, and motivational variables as determinants of strategy transfer. (Author/CI)

  18. Applying Information Processing Theory to Supervision: An Initial Exploration

    ERIC Educational Resources Information Center

    Tangen, Jodi L.; Borders, L. DiAnne

    2017-01-01

    Although clinical supervision is an educational endeavor (Borders & Brown, [Borders, L. D., 2005]), many scholars neglect theories of learning in working with supervisees. The authors describe 1 learning theory--information processing theory (Atkinson & Shiffrin, 1968, 1971; Schunk, 2016)--and the ways its associated interventions may…

  19. Remedial Process Optimization and Green In-Situ Ozone Sparging for Treatment of Groundwater Impacted with Petroleum Hydrocarbons

    NASA Astrophysics Data System (ADS)

    Leu, J.

    2012-12-01

    A former natural gas processing station is impacted with TPH and BTEX in groundwater. Air sparging and soil vapor extraction (AS/AVE) remediation systems had previously been operated at the site. Currently, a groundwater extraction and treatment system is operated to remove the chemicals of concern (COC) and contain the groundwater plume from migrating offsite. A remedial process optimization (RPO) was conducted to evaluate the effectiveness of historic and current remedial activities and recommend an approach to optimize the remedial activities. The RPO concluded that both the AS/SVE system and the groundwater extraction system have reached the practical limits of COC mass removal and COC concentration reduction. The RPO recommended an in-situ chemical oxidation (ISCO) study to evaluate the best ISCO oxidant and approach. An ISCO bench test was conducted to evaluate COC removal efficiency and secondary impacts to recommend an application dosage. Ozone was selected among four oxidants based on implementability, effectiveness, safety, and media impacts. The bench test concluded that ozone demand was 8 to 12 mg ozone/mg TPH and secondary groundwater by-products of ISCO include hexavalent chromium and bromate. The pH also increased moderately during ozone sparging and the TDS increased by approximately 20% after 48 hours of ozone treatment. Prior to the ISCO pilot study, a capture zone analysis (CZA) was conducted to ensure containment of the injected oxidant within the existing groundwater extraction system. The CZA was conducted through a groundwater flow modeling using MODFLOW. The model indicated that 85%, 90%, and 95% of an injected oxidant could be captured when a well pair is injecting and extracting at 2, 5, and 10 gallons per minute, respectively. An ISCO pilot test using ozone was conducted to evaluate operation parameters for ozone delivery. The ozone sparging system consisted of an ozone generator capable of delivering 6 lbs/day ozone through two ozone

  20. 77 FR 22226 - Regulation of Oil-Bearing Hazardous Secondary Materials From the Petroleum Refining Industry...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-04-13

    ... From the Petroleum Refining Industry Processed in a Gasification System To Produce Synthesis Gas; Final... Petroleum Refining Industry Processed in a Gasification System To Produce Synthesis Gas,'' published in the... From the Petroleum Refining Industry Processed in a Gasification System To Produce Synthesis...

  1. Aeolian Processes at the Mars Exploration Rover Opportunity Landing Site

    NASA Technical Reports Server (NTRS)

    Sullivan, R.; Bell, J. F., III; Calvin, W.; Fike, D.; Golombek, M.; Greeley, R.; Grotzinger, J.; Herkenhoff, K.; Jerolmack, D.; Malin, M.

    2005-01-01

    The traverse of the Mars Exploration Rover Opportunity across its Meridiani Planum landing site has shown that wind has affected regolith by creating drifts, dunes, and ubiquitous ripples, by sorting grains during aeolian transport, by forming bright wind streaks downwind from craters seen from orbit, and by eroding rock with abrading, wind-blown material. Pre-landing orbiter observations showed bright and dark streaks tapering away from craters on the Meridiani plains. Further analysis of orbiter images shows that major dust storms can cause bright streak orientations in the area to alternate between NW and SE, implying bright wind streak materials encountered by Opportunity are transient, potentially mobilized deposits. Opportunity performed the first in situ investigation of a martian wind streak, focusing on a bright patch of material just outside the rim of Eagle crater. Data from Pancam, the Miniature Thermal Emission Spectrometer (Mini-TES), the Alpha-Particle X-Ray Spectrometer (APXS), and the Mossbauer spectrometer either are consistent with or permit an air fall dust interpretation. We conclude that air fall dust, deposited in the partial wind shadow of Eagle crater, is responsible for the bright streak seen from orbit, consistent with models involving patchy, discontinuous deposits of air fall dust distributed behind obstacles during periods of atmospheric thermal stability during major dust storms.

  2. Petroleum marketing annual 1993

    SciTech Connect

    Not Available

    1995-01-01

    The Petroleum Marketing Annual (PMA) contains statistical data on a variety of crude oils and refined petroleum products. The publication provides statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the free-on-board (f.o.b.) and landed cost of imported crude oil, and the refiners acquisition cost of crude oil. Sales data for motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane are presented. For this publication, all estimates have been recalculated since their earlier publication in the Petroleum Marketing Monthly (PMM). These calculations made use of additional data and corrections that were received after the PMM publication dates.

  3. Carbonate petroleum reservoirs

    SciTech Connect

    Roehl, P.O.; Choquette, P.W.

    1985-01-01

    This book presents papers on the geology of petroleum deposits. Topics considered include diagenesis, porosity, dolomite reservoirs, deposition, reservoir rock, reefs, morphology, fracture-controlled production, Cenozoic reservoirs, Mesozoic reservoirs, and Paleozoic reservoirs.

  4. Petroleum Vapor Intrusion

    EPA Pesticide Factsheets

    One type of vapor intrusion is PVI, in which vapors from petroleum hydrocarbons such as gasoline, diesel, or jet fuel enter a building. Intrusion of contaminant vapors into indoor spaces is of concern.

  5. History of petroleum development in Arctic Alaska

    SciTech Connect

    Gryc, G. )

    1991-03-01

    Long before recorded history, tar from oil seepages and oil shale that burned like wood were used for fuel by the Inuit (native people of Arctic Alaska). The first published descriptions of these oil seepages that identified Arctic Alaska as a petroliferous province appeared in 1909. In 1921, several applications for prospecting permits were filed by private groups under the old mining laws, but the permits were never issued. In 1923, President Harding set aside about half of the North Slope of Alaska, including most of the seepage areas, as Naval Petroleum Reserve No. 4. This was followed by three periods of federally sponsored exploration programs in the reserve and the adjoining areas during the periods 1923 to 1926, 1944 to 1952, and 1974 to 1982. Noncommercial oil and gas deposits were discovered in the reserve, the gas deposits at Barrow were developed for local use, and the feasibility of petroleum exploration and development in the Arctic was established. Industry exploration began in 1958 when the lands adjacent to the reserve were opened for lease. Prudhoe Bay, North America's largest oil field, was discovered in 1968. The history of petroleum development in Arctic Alaska provides an interesting study of the building of a geologic, geographic, and logistic base, of the lead time required for resource exploitation, of the interaction of government and industry, and of the expansion of the US resource base during a time of expanding ecologic awareness. Petroleum exploration in the Canadian Arctic region was stimulated by the activity across the border in Alaska.

  6. An Air-Stripping Packed Bed Combined with a Biofilm-Type Biological Process for Treating BTEX and Total Petroleum Hydrocarbon Contaminated Groudwater

    NASA Astrophysics Data System (ADS)

    Hong, U.; Park, S.; Lim, J.; Lee, W.; Kwon, S.; Kim, Y.

    2009-12-01

    In this study, we examined the removal efficiency of a volatile compound (e.g. toluene) and a less volatile compound [e.g. total petroleum hydrocarbon (TPH)] using an air stripping packed bed combined with a biofilm-type biological process. We hypothesized that this system might be effective and economical to simultaneously remove both volatile and less volatile compounds. The gas-tight reactor has 5.9-inch-diameter and 48.8-inch-height. A spray nozzle was installed at the top cover to distribute the liquid evenly through reactor. The reactor was filled with polypropylene packing media for the increase of volatilization surface area and the growth of TPH degrading facultative aerobic bacteria on the surface of the packing media. In air stripping experiments, 45.6%, 71.7%, 72.0%, and 75.4% of toluene was removed at air injection rates of 0 L/min, 2.5 L/min, 4 L/min, and 6 L/min, respectively. Through the result, we confirmed that toluene removal efficiency increased by injecting higher amounts of air. TPH removal by stripping was minimal. To remove a less volatile TPH by commercial TPH degrading culture (BIO-ZYME B-52), 15-times diluted culture was circulated through the reactor for 2-3 days to build up a biofilm on the surface of packing media with 1 mg-soluble nitrogen source /L-water per 1 ppm of TPH. Experiments evaluating the degree of TPH biodegradation in this system are carrying out.

  7. Anaerobic methanethiol degradation and methanogenic community analysis in an alkaline (pH 10) biological process for liquefied petroleum gas desulfurization.

    PubMed

    van Leerdam, Robin C; Bonilla-Salinas, Monica; de Bok, Frank A M; Bruning, H; Lens, Piet N L; Stams, Alfons J M; Janssen, Albert J H

    2008-11-01

    Anaerobic methanethiol (MT) degradation by mesophilic (30 degrees C) alkaliphilic (pH 10) communities was studied in a lab-scale Upflow Anaerobic Sludge Bed (UASB) reactor inoculated with a mixture of sediments from the Wadden Sea (The Netherlands), Soap Lake (Central Washington), and Russian soda lakes. MT degradation started after 32 days of incubation. During the first 252 days, complete degradation was achieved till a volumetric loading rate of 7.5 mmol MT/L/day, and sulfide, methane, and carbon dioxide were the main reaction products. Temporary inhibition of MT degradation occurred after MT peak loads and in the presence of dimethyl disulfide (DMDS), which is the autooxidation product of MT. From day 252 onwards, methanol was dosed to the reactor as co-substrate at a loading rate of 3-6 mmol/L/day to stimulate growth of methylotrophic methanogens. Methanol was completely degraded and also a complete MT degradation was achieved till a volumetric loading rate of 13 mmol MT/L/day (0.77 mmol MT/gVSS/day). However, from day 354 till the end of the experimental run (day 365), acetate was formed and MT was not completely degraded anymore, indicating that methanol-degrading homoacetogenic bacteria had partially outcompeted the methanogenic MT-degrading archea. The archeal community in the reactor sludge was analyzed by DGGE and sequencing of 16S rRNA genes. The methanogenic archea responsible for the degradation of MT in the reactor were related to Methanolobus oregonensis. A pure culture, named strain SODA, was obtained by serial dilutions in medium containing both trimethyl amine and dimethyl sulfide (DMS). Strain SODA degraded MT, DMS, trimethyl amine, and methanol. Flow sheet simulations revealed that for sufficient MT removal from liquefied petroleum gas, the extraction and biological degradation process should be operated above pH 9.

  8. Fundamentals of petroleum maps

    SciTech Connect

    Mc Elroy, D.P.

    1986-01-01

    It's a complete guide to the fundamentals of reading, using, and making petroleum maps. The topics covered are well spotting, lease posting, contouring, hanging cross sections, and ink drafting. This book not only tells the how of petroleum mapping, but it also tells the why to better understand the principles and techniques. The books does not teach ''drafting,'' but does describe the proper care and use of drafting equipment for those who are totally new to the task.

  9. Sedimentology and petroleum geology

    SciTech Connect

    Bjorlykke, K.O. )

    1989-01-01

    This book presents an introduction to sedimentology as well as petroleum geology. It integrates both subjects, which are closely related but mostly treated separately. The author covers the basic aspects of sedimentology, sedimentary geochemistry and diagenesis. Principles of stratigraphy, seismic stratigraphy and basin modelling forms the base for the part on petroleum geology. Subjects discussed include the composition of kerogen and hydrocarbons, theories of migration and trapping of hydrocarbons and properties of reservoir rocks. Introductions to well logging and production geology are given.

  10. NAFTA opportunities: Petroleum refining

    SciTech Connect

    Not Available

    1993-01-01

    The North American Free Trade Agreement (NAFTA) creates a more transparent environment for the sale of refined petroleum products to Mexico, and locks in access to Canada's relatively open market for these products. Canada and Mexico are sizable United States export markets for refined petroleum products, with exports of $556 million and $864 million, respectively, in 1992. These markets represent approximately 24 percent of total U.S. exports of these goods.

  11. Exploration

    USGS Publications Warehouse

    Wilburn, D.R.

    2002-01-01

    Exploration budgets fell for a fourth successive year in 2001. These decreases reflected low mineral commodity prices, mineral-market investment reluctance, company failures and a continued trend of company mergers and takeovers.

  12. Experiment at Duck, N.C., beach explores nearshore processes

    NASA Astrophysics Data System (ADS)

    Long, C. E.; Sallenger, A. H., Jr.

    Last year's first northeaster yielded a few surprises about the physics of nearshore oceanographic processes along a well-studied patch of the North Carolina coast. The storm winds and incident waves were typical, but nearshore currents and bathymetric response took an unexpected turn. An immense rip channel cut through the nearshore bar. Previous storm observations at this site had suggested that mean currents and bathymetry become uniform in the alongshore direction, but the rip channel challenged this assumption. Mapping after the storm showed that the bar crest in the vicinity of the rip had migrated up to 100 m seaward over an alongshore distance of 200 m.

  13. 1991 international petroleum encyclopedia

    SciTech Connect

    Not Available

    1991-01-01

    There is no other petroleum industry publication quite like the International Petroleum Encyclopedia. With a timely, accurate combination of global industry coverage and analysis, detailed statistical surveys, cutting-edge reports on technological advancements and the ever-popular atlas maps, the 1991 International Petroleum Encyclopedia is a smart buy for professionals whose business is oil and gas, as well as for those whose business is affected by the industry's trends and developments. Written by a professional staff of Oil and Gas Journal petroleum experts, the 1991 IPE gives you the all important global perspective for constructing sound business strategies for the 90's. The petroleum industry is scrambling for information that will help it survive this volitile period. This book reports on the topics in the petroleum industry the latest developments in horizontal drilling, world refining (the latest information on reformulated fuels), and predictions about the post-war Persian Gulf industry. PULS, discussions on changes in the Gulf of Mexico, developments in the LNG trade, and crude oil tanker supply/.demand curves.

  14. Synthetic Fuels and Biofuels: Questionable Replacements for Petroleum

    DTIC Science & Technology

    2008-12-31

    FOR PETROLEUM 1.0 STATEMENT OF THE PROBLEM Petroleum- derived fuels meet the stringent military requirements that other alternative energy...resources of the United States such as coal, shale, biomass, gas hydrates, and CO2 [2]. Any hydrocarbon fuels derived by commercial processes, such as...exists on the composition of a wide range of petroleum fuels, commercial FT derived fuels, and biofuels [3-7]. However, the blend data of FT with

  15. Towards multidisciplinary assessment of older people: exploring the change process.

    PubMed

    Ross, Fiona; O'Tuathail, Claire; Stubberfield, Debbie

    2005-04-01

    This paper discusses the process of change that took place in an intervention study of standardized multidisciplinary assessment guidelines implemented in a female ward for older people in a District General Hospital in South London. This study was one of nine implementation projects in the South Thames Evidence-Based Practice Project. The relationship between the worlds of research and healthcare practice is uneasy and contested and, as such, is a breeding ground for challenging questions about how evidence can be used to foment change in clinical practice. Recent literature on change highlights the importance of understanding complexity, which informed our approach and analysis. A multifaceted approach to change that comprised evidence-based guidelines, leadership (project leader) and change management was evaluated before and after the implementation by telephone interviews with patients, a postal survey of community staff and interviews with ward staff. A diagnostic analysis of current assessment practice informed the change process. The project leader collected data on adherence. This paper draws on descriptive and qualitative data and addresses the links between contextual issues and the processes and pathways of change, informed by theoretical ideas from the change literature. Key themes emerged: working through others and across boundaries, managing uncertainty and unanticipated challenges. Adherence of ward staff to using the multidisciplinary assessment guidelines was high, with evidence of some dissemination to community staff at follow-up. Three years after the project finished the multidisciplinary assessment is still part of routine clinical practice. The analysis contributes to understanding about the nursing leadership of change within an interprofessional arena of practice. It highlights the importance of understanding the context in relation to the impact and sustainability of change and thus the utility of conducting a diagnostic analysis in the

  16. Exploring the {alpha}p-process with Grand Raiden

    SciTech Connect

    O'Brien, S.; Berg, G. P. A.; Couder, M.; Goerres, J.; Patel, D.; Sault, K.; Wiescher, M.; Adachi, T.; Hatanaka, K.; Ishikawa, D.; Matsubara, H.; Okamura, H.; Ong, H. J.; Suzuki, T.; Tamii, A.; Zenihiro, J.; Dozono, M.; Wakasa, T.; Fujita, H.; Fujita, Y.

    2009-01-28

    {sup 22}Mg, {sup 30}S, {sup 34}Ar and {sup 38}Ca have been investigated using (p,t) reactions at RCNP with the intent of identifying energy levels in nuclei that determine the reaction rates along the pathway of the {alpha}p-process. These experiments exploit the high resolution and 0 deg. capabilities of the Grand Raiden spectrometer and the WS beamline, which can deliver a fully dispersion matched beam to target. The level information is vital to understanding the nucleosynthesis occurring during explosive hydrogen burning, which, for example, is thought to occur during type I X-ray bursts. In the case of {sup 22}Mg, new reaction rate calculations have been performed for the {sup 18}Ne({alpha},p){sup 21}Na reaction. The experimental technique will be discussed, and the experimental results will be presented.

  17. Exploring the cortical evidence of a sensory-discrimination process.

    PubMed Central

    Romo, Ranulfo; Hernández, Adrián; Zainos, Antonio; Brody, Carlos; Salinas, Emilio

    2002-01-01

    Humans and monkeys have similar abilities to discriminate the difference in frequency between two consecutive mechanical vibrations applied to their fingertips. This task can be conceived as a chain of neural operations: encoding the two consecutive stimuli, maintaining the first stimulus in working memory, comparing the second stimulus with the memory trace left by the first stimulus and communicating the result of the comparison to the motor apparatus. We studied this chain of neural operations by recording and manipulating neurons from different areas of the cerebral cortex while monkeys performed the task. The results indicate that neurons of the primary somatosensory cortex (S1) generate a neural representation of vibrotactile stimuli which correlates closely with psychophysical performance. Discrimination based on microstimulation patterns injected into clusters of S1 neurons is indistinguishable from that produced by natural stimuli. Neurons from the secondary somatosensory cortex (S2), prefrontal cortex and medial premotor cortex (MPC) display at different times the trace of the first stimulus during the working-memory component of the task. Neurons from S2 and MPC appear to show the comparison between the two stimuli and correlate with the behavioural decisions. These neural operations may contribute to the sensory-discrimination process studied here. PMID:12217172

  18. Learning Science Process Through Data Exploration and Writing

    NASA Astrophysics Data System (ADS)

    Prothero, W. A.

    2007-12-01

    One of the most effective ways of teaching science process is to have students take part in the same activities that practicing scientists engage in. These activities include studying the current research in the field, discussing ideas with colleagues, formulating a research problem, making a proposal defining the problem and plan of attack, presenting and writing about the results of the study, and critically reviewing the work of others. An inquiry curriculum can use these activities to guide the scaffolding of assignments and learning experiences that help students learn science process. At UCSB, students in a large general education oceanography class use real Earth data to study plate tectonics, the Indian Monsoon, climate change, and the health of the world fisheries. The end product for each subject has been a science paper based on Earth data. Over a period of approximately 15 years, the scaffolding of activities to prepare each student for the written assignments has been modified and improved, in response to student feedback and their success with the assignments. I have found that the following resources and sequence of activities help the oceanography students write good science papers. 1. Lecture: motivation and the opportunity for feedback and questions. 2. Textbook: background information. It is also possible to get the information from the internet, but unless the scope of reading is strictly defined, students don't know when to stop reading and become unhappy. 3. Online assignments: automatically graded assignments that force the student to keep up with reading. 4. Questions of the day: in-class handouts, with diagrams that the students either complete, or answer questions about. They are handed in and tallied, but not graded. They also inform the instructor of misconceptions. 5. Thought questions: student answers are posted on a threaded discussion list, and are due prior to lecture. The answers provide instructor feedback and guide the lecture

  19. Unconventional petroleum: a current awareness bulletin

    SciTech Connect

    Grissom, M.C.

    1983-10-30

    The summaries in this bulletin cover both secondary and tertiary recovery of petroleum and the following topics under Oil Shales and Tar Sands: reserves and exploration; site geology and hydrology; drilling, fracturing, and mining; oil production, recovery, and refining; properties and composition; direct uses and by-products; health and safety; marketing and economics; waste research and management; environmental aspects; and regulations. These summaries and older citations to information on petroleum, oil shales, and tar sands back to the 1960's are available for on-line searching and retrieval on the Energy Data Base using the DOE/RECON system or commercial on-line retrieval systems. Retrospective searches can be made on any aspect of petroleum, oil shales, or tar sands, or customized profiles can be developed to provide current information for each user's needs.

  20. Document imaging finding niche in petroleum industry

    SciTech Connect

    Cisco, S.L.

    1992-11-09

    Optical disk-based document imaging systems can reduce operating costs, save office space, and improve access to necessary information for petroleum companies that have extensive records in various formats. These imaging systems help solve document management problems to improve technical and administrative operations. Enron Gas Pipeline Group has installed a document imaging system for engineering applications to integrate records stored on paper, microfilm, or computer-aided drafting (CAD) systems. BP Exploration Inc. recently implemented a document imaging system for administrative applications. The company is evaluating an expansion of the system to include engineering and technical applications. The petroleum industry creates, acquires, distributes, and retrieves enormous amounts of data and information, which are stored on multiple media, including paper, microfilm, and electronic formats. There are two main factors responsible for the immense information storage requirements in the petroleum industry.

  1. Economics and regulation of petroleum futures markets

    SciTech Connect

    Not Available

    1980-08-01

    Because the futures market in petroleum products is a relatively recent phenomenon, the implications of public policies formulated for that market have not yet been fully explored. To provide the Office of Competition of the Department of Energy (DOE) with sufficient information to assess policy alternatives, Resource Planning Associates, Inc. (RPA) was asked to analyze the development of the futures market in No. 2 oil, assess the potential for futures markets in other petroleum products, and identify policy alternatives available to DOE. To perform this analysis, the criteria for a viable futures market was established first. Then, the experience to date with the 18-month-old futures market in No. 2 oil was examined, and the potential for viable futures markets in No. 6 oil, gasoline, jet fuel, and crude oil was assessed. Finally, how existing DOE regulations and prospective actions might affect petroleum futures market development was investigated.

  2. Sulphur petroleum coke as a highly effective reducing agent in the production of barite salts

    SciTech Connect

    Koshkarov, V.Ya; Barabadze, R.A.; Kazakova, M.Ye.; Margvelashvili, P.V.; Okreshidze, A.Yu.; Trutnyev, G.A.

    1980-01-01

    Describes laboratory and industrial tests on the use of lowasash sulphurous petroleum coke during reduction of barite. Shows the potential of substituting blast furnace coke with petroleum/coke fines in this process.

  3. 31 CFR 542.314 - Petroleum or petroleum products of Syrian origin.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 31 Money and Finance:Treasury 3 2014-07-01 2014-07-01 false Petroleum or petroleum products of... REGULATIONS General Definitions § 542.314 Petroleum or petroleum products of Syrian origin. The term petroleum or petroleum products of Syrian origin means petroleum or petroleum products of Syrian...

  4. Petroleum marketing monthly, May 1994

    SciTech Connect

    Not Available

    1994-05-26

    The Petroleum Marketing Monthly (PMM) provides information and statistical data on a variety of crude oils and refined petroleum products. The publication presents statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the f.o.b. and landed cost of imported crude oil, petroleum product sales data include motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane. The Petroleum Marketing Division, Office of Oil and Gas, Energy Information Administration ensures the accuracy, quality, and confidentiality of the published data in the Petroleum Marketing Monthly.

  5. Carbonization of petroleum feedstocks

    SciTech Connect

    Eser, S.

    1987-01-01

    The properties of the petroleum cokes are determined by their crystalline structure, which principally depends on the nature of the mesophase formed during the liquid-phase carbonization of the precursors. This study was aimed at investigating the relationships between the chemical nature of the petroleum feedstocks and the mesophase development during carbonization. Ashland 240 pitch and a range of petroleum heavy residua were characterized by solvent fractionation, elemental analysis, Fourier Transform Infrared Spectroscopy, H and TC Nuclear Magnetic Resonance Spectroscopy. The semi-coke (pyridine insolubles) formation from the feedstocks and their asphaltene fractions was found to be first-order with respect to the concentration of pyridine solubles over a wide conversion range. An inverse relationship was observed between the rate of carbonization of the asphaltenes and the degree of mesophase development. The degree of mesophase development during the carbonization of the feedstock asphaltenes increased consistently with the increasing hydrogen aromaticity over the whole range of the feedstocks used. The principal conclusion from this study is that the mesophase development during carbonization critically depends on the chemical constitution of the petroleum feedstocks. The molecular nature of the asphaltene fractions determines the extent of mesophase development during the carbonization of the petroleum heavy residua. In this respect, the hydrogen aromaticity of the asphaltenes appears to be a good measure for the feedstock quality in terms of resulting coke structure and properties.

  6. Reservoirs and petroleum systems of the Gulf Coast

    USGS Publications Warehouse

    Pitman, Janet

    2010-01-01

    This GIS product was designed to provide a quick look at the ages and products (oil or gas) of major reservoir intervals with respect to the different petroleum systems that have been identified in the Gulf Coast Region. The three major petroleum source-rock systems are the Tertiary (Paleocene-Eocene) Wilcox Formation, Cretaceous (Turonian) Eagle Ford Formation, and Jurassic (Oxfordian) Smackover Formation. The ages of the reservoir units extend from Jurassic to Pleistocene. By combining various GIS layers, the user can gain insights into the maximum extent of each petroleum system and the pathways for petroleum migration from the source rocks to traps. Interpretations based on these data should improve development of exploration models for this petroleum-rich province.

  7. Petroleum fingerprinting with organic markers

    USGS Publications Warehouse

    Hostettler, Frances D.; Lorenson, T.D.; Bekins, Barbara A.

    2013-01-01

    Petroleum fingerprinting is an invaluable tool in forensic geochemistry. This article summarizes applications of fingerprinting in several oil spills and natural oil seepages that we have studied during the last 25 years. It shows how each unique chemical fingerprint can be used to correlate or differentiate oils. Fingerprints can provide information about processes in the environment that impact oils such as weathering and microbial degradation. They can be used to evaluate organic matter that contributed to oils, and classify oils with regard to the geological framework of their source, such as evaluating geological facies, age, lithology, and depositional environment.

  8. Petroleum Marketing Annual, 1989

    SciTech Connect

    Not Available

    1990-12-18

    This report contains statistical data on a variety of crude oils and refined petroleum products. The publication provides statistics on crude oil costs and refined petroleum products sales for us by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the free-on-board (f.o.b.) and landed cost of imported crude oil, and the refiners' acquisition cost of crude oil. Sales data for motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane are presented. 13 figs., 51 tabs.

  9. Petroleum marketing annual, 1992

    SciTech Connect

    Not Available

    1993-07-01

    This publication contains statistical data on a variety of crude oils and refined petroleum products. The publication provides statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the free-on-board (f.o.b.) and landed cost of imported crude oil, and the refiners` acquisition cost of crude oil. Sales data for motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane are presented.

  10. [Exploration on academic thought of Zhang Zhongjing on processing of Chinese herbal medicine].

    PubMed

    Yuan, Guoqing

    2010-03-01

    For exploration on the academic thought on processing of Chinese herbal medicine the basic theory and methods, textual research of the scientific of Zhang Zhongiing on processing of Chinese herbal medicine was summarized, and the historical significance on academic thought of Zhang Zhongjing on processing of Chinese herbal medicine was analyzed. Regarded Zhang Zhongjing is the ancestor of processing of Chinese herbal medicine to lay the theoretical foundation on processing of Chinese herbal medicine for later.

  11. Reflective Processes: A Qualitative Study Exploring Early Learning Student Teacher Mentoring Experiences in Student Teaching Practicums

    ERIC Educational Resources Information Center

    Barnes, Michelle M.

    2013-01-01

    This doctoral thesis explored mentoring in early learning teacher preparation programs. This study explored the reflective processes embedded in the work between student teachers and their mentors during early learning student teacher experiences at Washington State community and technical colleges. Schon's (1987a) concepts of…

  12. Reflective Processes: A Qualitative Study Exploring Early Learning Student Teacher Mentoring Experiences in Student Teaching Practicums

    ERIC Educational Resources Information Center

    Barnes, Michelle M.

    2013-01-01

    This doctoral thesis explored mentoring in early learning teacher preparation programs. This study explored the reflective processes embedded in the work between student teachers and their mentors during early learning student teacher experiences at Washington State community and technical colleges. Schon's (1987a) concepts of…

  13. An Exploration of the Process of Ideological Identity Formation in Young Rural Adolescents.

    ERIC Educational Resources Information Center

    Manners, Pamela A.; Smart, David J.

    This paper explores the process of identity formation as related to adolescents' level of moral development, race, sex, and family configuration. Ego identity was operationalized into four identity statuses based on an adolescent's reported degree of exploration and goal commitment in the areas of occupation, religion, politics, and philosophy…

  14. Petroleum supply monthly, July 1999, with data for May 1999

    SciTech Connect

    1999-07-01

    The Petroleum Supply Monthly (PSM) is one of a family of four petroleum supply publications produced by the Petroleum Division within the Energy Information Administration (EIA) reflecting different levels of data timeliness and completeness. The other publications are the Weekly Petroleum Status Report (WPSR), the Winter Fuels Report, and the Petroleum Supply Annual (PSA). Data presented in the PSM describe the supply and disposition of petroleum products in the US and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the US (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the US. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics. The Detail Statistics tables of the PSM present statistics for the most current month available as well as year-to-date. In most cases, the statistics are presented for several geographic areas--the US (50 States and the District of Columbia), five PAD Districts, and 12 Refining Districts. At the US and PAD District level, the total volume and the daily rate of activities are presented. The statistics are developed from monthly survey forms submitted by respondents to the EIA and from data provided from other sources.

  15. Petroleum supply monthly, April 1998, with data for February 1998

    SciTech Connect

    1998-04-01

    The Petroleum Supply Monthly (PSM) is one of a family of four publications produced by the Petroleum Supply Division within the Energy Information Administration (EIA) reflecting different levels of data timeliness and completeness. Data presented in the PSM describe the supply and disposition of petroleum products in the US and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the US (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the US. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics. The tables and figures in the Summary Statistics section of the PSM present a time series of selected petroleum data on a US level. Most time series include preliminary estimates for one month based on the Weekly Petroleum Supply Reporting System; statistics based on the most recent data from the Monthly Petroleum Supply Reporting System (MPSRS); and statistics published in prior issues of the PSM and PSA. The Detailed Statistics tables of the PSM present statistics for the most current month available as well as year-to-date. In most cases, the statistics are presented for several geographic areas--the US (50 States and District of Columbia), 5 PAD Districts and 12 Refining Districts. 16 figs., 56 tabs.

  16. Petroleum marketing monthly, June 1994

    SciTech Connect

    Not Available

    1994-06-01

    The Petroleum Marketing Monthly (PMM) provides information and statistical data on a variety of crude oils and refined petroleum products. The publication presents statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the f.o.b. and landed cost of imported crude oil, and the refiners` acquisition cost of crude oil. Refined petroleum product sales data include motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane. Monthly statistics on purchases of crude oil and sales of petroleum products are presented in five sections: Summary Statistics; Crude Oil Prices; Prices of Petroleum Products; Volumes of Petroleum Products; and Prime Supplier Sales Volumes of Petroleum Products for Local Consumption. The feature article is entitled ``The Second Oxygenated Gasoline Season.`` 7 figs., 50 tabs.

  17. Petroleum marketing monthly, July 1994

    SciTech Connect

    Not Available

    1994-07-01

    The Petroleum Marketing Monthly (PMM) provides information and statistical data on a variety of crude oils and refined petroleum products. The publication presents statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the f.o.b. and landed cost of imported crude oil, and the refiners` acquisition cost of crude oil. Refined petroleum product sales data include motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane. Monthly statistics on purchases of crude oil and sales of petroleum products are presented in five sections: summary statistics; crude oil prices; prices of petroleum products; volumes of petroleum products; and prime supplier sales volumes of petroleum products for local consumption. 7 figs., 50 tabs.

  18. Characteristics of petroleum contaminants and their distribution in Lake Taihu, China

    PubMed Central

    2012-01-01

    Background Taihu Lake is a typical plain eutrophic shallow lake. With rapidly economic development of the lake area, the petroleum products and oil wastewater produced in various processes have been inevitably discharged into Taihu Lake. As the major fresh water resource in the economically developed region of Yangtze River Delta, the water quality and environmental condition of Taihu Lake have the direct bearing on the natural environment and sustainable development of economy in this region. For this reason we carried out the study to explore the composition, distribution characteristics and sources of petroleum contaminants in Taihu Lake. The aim of this study was to provide the basis for standard management and pollution control of the Taihu Lake environment. Results The result showed that water samples from near industrial locations were of relatively higher petroleum contaminants concentrations. The oil pollutants concentrations in different areas of Lake Taihu ranged from 0.106 mg/L to 1.168 mg/L, and the sequence of total contents distribution characteristics of petroleum pollutants from high to low in different regions of Taihu Lake was: “Dapu”, “Xiaomeikou”, “Zhushan Bay”, “Lake center”, “Qidu”. The results showed that total concentrations of n-alkanes and PAHs ranged from 0.045 to 0.281 mg/L and from 0.011 to 0.034 mg/L respectively. In the same region, the concentrations of hydrocarbon pollutants in the surface and bottom of the lake were higher than that in the middle. Conclusion This paper reached a conclusion that the petroleum contaminants in Taihu Lake mainly derived from petroleum pollution caused by human activities as indicated by OEP, bimodal distribution, CPI, Pr/Ph ratio, the LMW/HMW ratio and other evaluation indices for sources of n-alkanes and polycyclic aromatic hydrocarbons (PAHs). PMID:22935425

  19. Petroleum supply monthly, July 1997 with data from May 1997

    SciTech Connect

    1997-07-01

    Data presented in the Petroleum Supply Monthly (PSM) describes the supply and disposition of petroleum products in the US and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the US (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the US. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics. The tables and figures in the Summary Statistics section of the PSM present a time series of selected petroleum data on a US level. The Detailed Statistics tables of the PSM present statistics for the most current month available as well as year-to-date. 16 figs., 66 tabs.

  20. Petroleum supply monthly, May 1996 with data from March 1996

    SciTech Connect

    1996-05-01

    Data presented in the Petroleum Supply Monthly (PSM) describe the supply and disposition of petroleum products in the US and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the US (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the US. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics. The tables and figures in the Summary Statistics section of the PSM present a time series of selected petroleum data on a US level. The Detailed Statistics tables of the PSM present statistics for the most current month available as well as year-to-date. 16 figs., 66 tabs.

  1. Petroleum supply monthly, February 1998 with data from December 1997

    SciTech Connect

    1998-02-01

    The Petroleum Supply Monthly (PSM) describes the supply and disposition of petroleum products in the US and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the US (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the US. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics. The tables and figures in the Summary Statistics section of the PSM present a time series of selected petroleum data on a US level. The Detailed Statistics tables of the PSM present statistics for the most current month available as well as year-to-date. 16 figs., 66 tabs.

  2. Sulphur-radical control on petroleum formation rates

    USGS Publications Warehouse

    Lewan, M.D.

    1998-01-01

    Most petroleum is formed through the partial decomposition of kerogen (an insoluble sedimentary organic material) in response to thermal stress during subsurface burial in a sedimentary basin. Knowing the mechanisms and kinetics of this process allows the determination of the extent and timing of petroleum formation, which, in turn, are critical for evaluating the potential for petroleum occurrences within a sedimentary basin. Kinetic models of petroleum generation are derived mainly from pyrolysis experiments, in which it is usually assumed that formation rates are controlled by the strength of the bonds within the precursor compounds: this agrees with the observation that petroleum formation rates increase with increasing sulphur content of thermally immature kerogen, C-S bonds being weaker than C-C bonds. However, this explanation fails to account for the overall composition of petroleum. Here I argue, on the basis of pyrolysis experiments, that it is the presence of sulphur radicals, rather than the relative weakness of C-S bonds, that controls petroleum formation rates. My findings suggest that the rate of petroleum formation depends critically on the concentration of sulphur radicals generated during the initial stages of thermal maturation. The proposed mechanism appears to provide a realistic explanation for both the overall composition of petroleum and the observed variation in formation rates.

  3. Petroleum supply monthly, October 1998, with data for August 1998

    SciTech Connect

    1998-10-01

    Data presented in the PSM describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics. The tables and figures in the Summary Statistics section of the PSM present a time series of selected petroleum data on a US level. The Detailed Statistics tables of the PSM present statistics for the most current month available as well as year-to-date. A feature article, Accuracy of petroleum supply data, is also included. 72 tabs.

  4. Petroleum supply monthly, December 1997 with data from October 1997

    SciTech Connect

    1997-12-01

    Data presented in the Petroleum Supply Monthly (PSM) describes the supply and disposition of petroleum products in the US and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the US (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregates, the data reported by these sectors approximately represent the consumption of petroleum products in the US. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics. The tables and figures in the Summary Statistics section of the PSM present a time series of selected petroleum data on a US level. The Detailed Statistics tables of the PSM present statistics for the most current month available as well as year-to-date. 16 figs., 66 tabs.

  5. Petroleum supply monthly, February 1999, with data for December 1998

    SciTech Connect

    1999-02-01

    Data presented in the Petroleum Supply Monthly (PSM) describes the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics. The tables and figures in the Summary Statistics section of the PSM present a time series of selected petroleum data on a US level. The Detailed Statistics tables of the PSM present statistics for the most current month available as well as year-to-date. 16 figs., 66 tabs.

  6. Petroleum supply monthly, April 1999, with data for February 1999

    SciTech Connect

    1999-04-01

    Data presented in the Petroleum Supply Monthly (PSM) describe the supply and disposition of petroleum products in the US and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the US (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the US. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics. The tables and figures in the Summary Statistics section of the PSM present a time series of selected petroleum data on a US level. The Detailed Statistics tables of the PSM present statistics for the most current month available as well as year-to-date. 72 tabs.

  7. Petroleum supply monthly: July 1998, with data for May 1998

    SciTech Connect

    1998-07-01

    Data presented in the Petroleum Supply Monthly (PSM) describes the supply and disposition of petroleum products in the US and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the US (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the US. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics. The tables and figures in the Summary Statistics section of the PSM present a time series of selected petroleum data on a US level. The Detailed Statistics tables of the PSM present statistics for the most current month available as well as year-to-date. 16 figs., 56 tabs.

  8. Petroleum supply monthly, June 1998 with data for April 1998

    SciTech Connect

    1998-06-01

    Data presented in the Petroleum Supply Monthly (PSM) describe the supply and disposition of petroleum products in the US and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the US (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the US. The tables and figures in the Summary Statistics section of the PSM present a time series of selected petroleum data on a US level. The Detailed Statistics tables of the PSM present statistics for the most current month available as well as year-to-date. 16 figs., 66 tabs.

  9. Petroleum supply monthly, January 1997 with data for November 1996

    SciTech Connect

    1997-01-01

    Data presented in the Petroleum Supply Monthly describe the supply and disposition of petroleum products in the US and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the US (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the US. Data are divided into two sections: Summary Statistics and Detailed Statistics. The tables and figures in the Summary Statistics section present a time series of selected petroleum data on a US level. The Detailed Statistics tables present statistics for the most current month available as well as year-to-date. 16 figs., 66 tabs.

  10. Petroleum supply monthly, December 1995: With data for October 1995

    SciTech Connect

    1995-12-01

    Data presented in the Petroleum Supply Monthly (PSM) describe the supply and disposition of petroleum products in the US and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the US (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the US. The tables and figures in the Summary Statistics section of the PSM present a time series of selected petroleum data on a US level. The Detailed Statistics tables of the PSM present statistics for the most current month available as well as year-to-date. In most cases, the statistics are presented for several geographic areas--the US (50 States and the District of Columbia), five PAD Districts, and 12 Refining Districts. At the US and PAD District level, the total volume and the daily rate of activities are presented. 16 figs., 6 tabs.

  11. Petroleum supply monthly, January 1999 with data for November 1998

    SciTech Connect

    1999-01-01

    Data presented in the Petroleum Supply Monthly (PSM) describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics. The tables and figures in the Summary Statistics section of the PSM present a time series of selected petroleum data on a US level. The Detailed Statistics tables of the PSM present statistics for the most current month available as well as year-to-date. 82 tabs.

  12. Petroleum supply monthly, May 1999, with data for March 1999

    SciTech Connect

    1999-05-01

    Data presented in the Petroleum Supply Monthly (PSM) describe the supply and disposition of petroleum products in the US and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary supplies of petroleum products in the US (50 states and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the US. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics. The tables and figures in the Summary Statistics section of the PSM present a time series of selected petroleum data on a US level. The Detailed Statistics tables of the PSM present statistics for the most current month available as well as year-to-date. 72 tabs.

  13. Petroleum supply monthly, August 1998, with data for June 1998

    SciTech Connect

    1998-08-01

    Data presented in the Petroleum Supply Monthly (PSM) describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the US (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics. The tables and figures in the Summary Statistics section of the PSM present a time series of selected petroleum data on a US level. The Detailed Statistics tables of the PSM present statistics for the most current month available as well as year-to-date. 16 fig., 66 tabs.

  14. Petroleum supply monthly, November 1998, with data for September 1998

    SciTech Connect

    1998-11-01

    Data presented in the Petroleum Supply Monthly (PSM) describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the Unites States. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics. The tables and figures in the Summary Statistics section of the PSM present a time series of selected petroleum data on a US level. The Detailed Statistics tables of the PSM present statistics for the most current month available as well as year-to-date. 72 tabs.

  15. Petroleum supply monthly, June 1999, with data for April 1999

    SciTech Connect

    1999-06-01

    Data presented in the Petroleum Supply Monthly (PSM) describe the supply and disposition of petroleum products in the US and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the US (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the US. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics. The tables and figures in the Summary Statistics section of the PSM present a time series of selected petroleum data on a US level. The Detailed Statistics tables of the PSM present statistics for the most current month available as well as year-to-date. 16 figs., 66 tabs.

  16. BIOREMEDIATION OF PETROLEUM HYDROCARBONS: A FLEXIBLE VARIABLE SPEED TECHNOLOGY

    EPA Science Inventory

    The bioremediation of petroleum hydrocarbons has evolved into a number of different processes. These processes include in-situ aquifer bioremediation, bioventing, biosparging, passive bioremediation with oxygen release compounds, and intrinsic bioremediation. Although often viewe...

  17. BIOREMEDIATION OF PETROLEUM HYDROCARBONS: A FLEXIBLE VARIABLE SPEED TECHNOLOGY

    EPA Science Inventory

    The bioremediation of petroleum hydrocarbons has evolved into a number of different processes. These processes include in-situ aquifer bioremediation, bioventing, biosparging, passive bioremediation with oxygen release compounds, and intrinsic bioremediation. Although often viewe...

  18. Chemical Principles Revisited: Petroleum Chemistry.

    ERIC Educational Resources Information Center

    Kolb, Doris; Kolb, Kenneth E.

    1979-01-01

    Presents an historical review of the role of petroleum in world history and information on the chemistry of petroleum. It is suggested that petroleum chemistry be discussed since within the next two decades oil and gas will provide the major portion of U.S. energy. (Author/SA)

  19. Chemical Principles Revisited: Petroleum Chemistry.

    ERIC Educational Resources Information Center

    Kolb, Doris; Kolb, Kenneth E.

    1979-01-01

    Presents an historical review of the role of petroleum in world history and information on the chemistry of petroleum. It is suggested that petroleum chemistry be discussed since within the next two decades oil and gas will provide the major portion of U.S. energy. (Author/SA)

  20. Life in the slow lane; biogeochemistry of biodegraded petroleum containing reservoirs and implications for energy recovery and carbon management

    PubMed Central

    Head, Ian M.; Gray, Neil D.; Larter, Stephen R.

    2014-01-01

    Our understanding of the processes underlying the formation of heavy oil has been transformed in the last decade. The process was once thought to be driven by oxygen delivered to deep petroleum reservoirs by meteoric water. This paradigm has been replaced by a view that the process is anaerobic and frequently associated with methanogenic hydrocarbon degradation. The thermal history of a reservoir exerts a fundamental control on the occurrence of biodegraded petroleum, and microbial activity is focused at the base of the oil column in the oil water transition zone, that represents a hotspot in the petroleum reservoir biome. Here we present a synthesis of new and existing microbiological, geochemical, and biogeochemical data that expands our view of the processes that regulate deep life in petroleum reservoir ecosystems and highlights interactions of a range of biotic and abiotic factors that determine whether petroleum is likely to be biodegraded in situ, with important consequences for oil exploration and production. Specifically we propose that the salinity of reservoir formation waters exerts a key control on the occurrence of biodegraded heavy oil reservoirs and introduce the concept of palaeopickling. We also evaluate the interaction between temperature and salinity to explain the occurrence of non-degraded oil in reservoirs where the temperature has not reached the 80–90°C required for palaeopasteurization. In addition we evaluate several hypotheses that might explain the occurrence of organisms conventionally considered to be aerobic, in nominally anoxic petroleum reservoir habitats. Finally we discuss the role of microbial processes for energy recovery as we make the transition from fossil fuel reliance, and how these fit within the broader socioeconomic landscape of energy futures. PMID:25426105

  1. Life in the slow lane; biogeochemistry of biodegraded petroleum containing reservoirs and implications for energy recovery and carbon management.

    PubMed

    Head, Ian M; Gray, Neil D; Larter, Stephen R

    2014-01-01

    Our understanding of the processes underlying the formation of heavy oil has been transformed in the last decade. The process was once thought to be driven by oxygen delivered to deep petroleum reservoirs by meteoric water. This paradigm has been replaced by a view that the process is anaerobic and frequently associated with methanogenic hydrocarbon degradation. The thermal history of a reservoir exerts a fundamental control on the occurrence of biodegraded petroleum, and microbial activity is focused at the base of the oil column in the oil water transition zone, that represents a hotspot in the petroleum reservoir biome. Here we present a synthesis of new and existing microbiological, geochemical, and biogeochemical data that expands our view of the processes that regulate deep life in petroleum reservoir ecosystems and highlights interactions of a range of biotic and abiotic factors that determine whether petroleum is likely to be biodegraded in situ, with important consequences for oil exploration and production. Specifically we propose that the salinity of reservoir formation waters exerts a key control on the occurrence of biodegraded heavy oil reservoirs and introduce the concept of palaeopickling. We also evaluate the interaction between temperature and salinity to explain the occurrence of non-degraded oil in reservoirs where the temperature has not reached the 80-90°C required for palaeopasteurization. In addition we evaluate several hypotheses that might explain the occurrence of organisms conventionally considered to be aerobic, in nominally anoxic petroleum reservoir habitats. Finally we discuss the role of microbial processes for energy recovery as we make the transition from fossil fuel reliance, and how these fit within the broader socioeconomic landscape of energy futures.

  2. Petroleum Vapor - Field Technical

    EPA Science Inventory

    The screening approach being developed by EPA OUST to evaluate petroleum vapor intrusion (PVI) requires information that has not be routinely collected in the past at vapor intrusion sites. What is the best way to collect this data? What are the relevant data quality issues and ...

  3. Non-Petroleum Oils

    EPA Pesticide Factsheets

    These include synthetics such as silicone fluids and tung oils, wood-derivative oils such as resin/rosin, animal fats/oil, and seed oils. Many have similar physical properties to petroleum-based, such as water insolubility and formation of slicks.

  4. Petroleum lands and leasing

    SciTech Connect

    Burk, J.

    1984-01-01

    This is a reference book for the lessor, lessee, royalty owner, PLM student and landman. Contents: A historical background; Rights of ownership; Instruments of conveyance; Who owns this land. The oil and gas lease and leasing procedures; Curing titles; Pooling and utilization; Contracts and agreements; Lease maintenance; Land measurements and descriptions; Code of ethics; American Association of Petroleum Landmen; Glossary.

  5. Petroleum Vapor - Field Technical

    EPA Science Inventory

    The screening approach being developed by EPA OUST to evaluate petroleum vapor intrusion (PVI) requires information that has not be routinely collected in the past at vapor intrusion sites. What is the best way to collect this data? What are the relevant data quality issues and ...

  6. 75 FR 18607 - Mandatory Reporting of Greenhouse Gases: Petroleum and Natural Gas Systems

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-04-12

    ...EPA is proposing a supplemental rule to require reporting of greenhouse gas (GHG) emissions from petroleum and natural gas systems. Specifically, the proposed supplemental rulemaking would require emissions reporting from the following industry segments: Onshore petroleum and natural gas production, offshore petroleum and natural gas production, natural gas processing, natural gas transmission......

  7. Petroleum Production for the Nontechnical Person

    SciTech Connect

    Gray, F.

    1986-01-01

    Petroleum Production for the Nontechnical Person is written for those whose jobs touch the production field but who still want to know more about the basics of production - without going back to school and without getting bogged down in a lengthy discourse on fluid dynamics. Contents include: Overview of the petroleum industry; Majors and independents; Productive formations; Field development; Drilling equipment and methods; Formation evaluation; Completion methods; Casing and cementing; Production concepts; Production methods; Production problems and special cases; Stimulation methods; Waterflooding; Enhanced oil recovery; Natural gas processing and cogeneration; Glossary; Index.

  8. 15 CFR Supplement No. 1 to Part 754 - Petroleum and Petroleum Products

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 15 Commerce and Foreign Trade 2 2011-01-01 2011-01-01 false Petroleum and Petroleum Products No... SUPPLY CONTROLS Pt. 754, Supp. 1 Supplement No. 1 to Part 754—Petroleum and Petroleum Products This... petroleum (including reconstituted crude petroleum), tar sands and crude shale oil. 2710.0710 Petroleum...

  9. 15 CFR Supplement No. 1 to Part 754 - Petroleum and Petroleum Products

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 15 Commerce and Foreign Trade 2 2014-01-01 2014-01-01 false Petroleum and Petroleum Products No... SUPPLY CONTROLS Pt. 754, Supp. 1 Supplement No. 1 to Part 754—Petroleum and Petroleum Products This... petroleum (including reconstituted crude petroleum), tar sands and crude shale oil. 2710.0710 Petroleum...

  10. 15 CFR Supplement No. 1 to Part 754 - Petroleum and Petroleum Products

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 15 Commerce and Foreign Trade 2 2010-01-01 2010-01-01 false Petroleum and Petroleum Products No... SUPPLY CONTROLS Pt. 754, Supp. 1 Supplement No. 1 to Part 754—Petroleum and Petroleum Products This... petroleum (including reconstituted crude petroleum), tar sands and crude shale oil. 2710.0710 Petroleum...

  11. 15 CFR Supplement No. 1 to Part 754 - Petroleum and Petroleum Products

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 15 Commerce and Foreign Trade 2 2013-01-01 2013-01-01 false Petroleum and Petroleum Products No... SUPPLY CONTROLS Pt. 754, Supp. 1 Supplement No. 1 to Part 754—Petroleum and Petroleum Products This... petroleum (including reconstituted crude petroleum), tar sands and crude shale oil. 2710.0710 Petroleum...

  12. 15 CFR Supplement No. 1 to Part 754 - Petroleum and Petroleum Products

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 15 Commerce and Foreign Trade 2 2012-01-01 2012-01-01 false Petroleum and Petroleum Products No... SUPPLY CONTROLS Pt. 754, Supp. 1 Supplement No. 1 to Part 754—Petroleum and Petroleum Products This... petroleum (including reconstituted crude petroleum), tar sands and crude shale oil. 2710.0710 Petroleum...

  13. Contributions in petroleum geology and engineering

    SciTech Connect

    Harvey, A.H.; Koederitz, L.; Honarpour, M. )

    1989-01-01

    This book discusses petroleum reservoir components and properties. The contents include: Systems of units. Reservoir Rocks. Reservoir fluids. Relative permeability and capillarity. Reservoir volume and fluid flow. Naturally fractured reservoirs. Natural production mechanisms. Prediction of oil and gas recovery. Analysis of well performance. Gas-condensate reservoirs. Enhanced oil recovery processes.

  14. Petroleum pollutant degradation by surface water microorganisms.

    PubMed

    Antić, Malisa P; Jovancićević, Branimir S; Ilić, Mila; Vrvić, Miroslav M; Schwarzbauer, Jan

    2006-09-01

    It is well known that the composition of petroleum or some of its processing products changes in the environment mostly under the influence of microorganisms. A series of experiments was conducted in order to define the optimum conditions for an efficient biodegradation of petroleum pollutant, or bioremediation of different segments of the environment. The aim of these investigations was to show to what extent the hydrocarbons of a petroleum pollutant are degraded by microbial cultures which were isolated as dominant microorganisms from a surface water of a wastewater canal of an oil refinery and a nitrogen plant. Biodegradation experiments were conducted on one paraffinic, and one naphthenic type of petroleum during a three month period under aerobic conditions, varying the following parameters: Inorganic (Kp) or an organic medium (Bh) with or without exposition to light. Microorganisms were analyzed in a surface water sample from a canal (Pancevo, Serbia), into which wastewater from an oil refinery and a nitrogen plant is released. The consortia of microorganisms were isolated from the water sample (most abundant species: Phormidium foveolarum--filamentous Cyanobacteria, blue-green algae and Achanthes minutissima, diatoms, algae). The simulation experiments of biodegradation were conducted with the biomass suspension and crude oils Sirakovo (Sir, paraffinic type) and Velebit (Ve, naphthenic type). After a three month period, organic substance was extracted by means of chloroform. In the extracts, the content of saturated hydrocarbons, aromatic hydrocarbons, alcohols and fatty acids was determined (the group composition). n-Alkanes and isoprenoid aliphatic alkanes, pristane and phytane, in the aliphatic fractions, were analyzed using gas chromatography (GC). Total isoprenoid aliphatic alkanes and polycyclic alkanes of sterane and triterpane types were analyzed by GC-MS. Paraffinic type petroleums have a significant loss of saturated hydrocarbons. For naphthenic

  15. Strategic Petroleum Reserve quarterly report

    SciTech Connect

    1995-11-15

    The Strategic Petroleum Reserve was created pursuant to the Energy Policy and Conservation Act of December 22, 1975 (Public Law 94-163). Its purposes are to reduce the impact of disruptions in supplies of petroleum products and to carry out obligations of the United States under the Agreement on an International Energy Program. Section 165(a) of the Act requires the submission of Annual Reports and Section 165(b)(1) requires the submission of Quarterly Reports. This Quarterly Report highlights activities undertaken during the third quarter of calendar year 1995, including: inventory of petroleum products stored in the Reserve; current storage capacity and ullage available; current status of the Strategic Petroleum Reserve storage facilities, major projects and the acquisition of petroleum products; funds obligated by the Secretary from the SPR Petroleum Account and the Strategic Petroleum Reserve Account during the prior calendar quarter and in total; and major environmental actions completed, in progress, or anticipated.

  16. Communicating Knowing through Communities of Practice: Exploring Internal Communicative Processes and Differences among CoPs

    ERIC Educational Resources Information Center

    Iverson, Joel O.; McPhee, Robert D.

    2008-01-01

    Knowing is an enacted, communicated process that is difficult to observe, let alone manage, in organizations. Communities of practice (CoPs) offer a productive solution for improving knowledge and knowledge management, but the communicative processes that enact CoPs have not been explored, leaving CoPs as an organizational black box. This research…

  17. Exploring the Writing Process of Indonesian EFL Students: The Effectiveness of Think-Aloud Protocol

    ERIC Educational Resources Information Center

    Abas, Imelda Hermilinda; Aziz, Noor Hashima Abd

    2016-01-01

    The objectives of this study were to explore the writing process of the Indonesian English as a Foreign Language (EFL) students and to find out the effectiveness of using think-aloud protocol to understand the writing process. The data were obtained from six proficient EFL students who were doing Postgraduate English Language Studies Program in…

  18. Exploring the Processing Continuum of Single-Word Comprehension in Aphasia

    ERIC Educational Resources Information Center

    Moineau, Suzanne; Dronkers, Nina F.; Bates, Elizabeth

    2005-01-01

    This study investigated the vulnerability of lexical processing in individuals with aphasia. Though classical teaching of aphasia syndromes holds that people with Broca's aphasia have intact comprehension at the single-word level, the nature and extent of this purported sparing were explored under suboptimal processing conditions. A combination of…

  19. Exploring business process modelling paradigms and design-time to run-time transitions

    NASA Astrophysics Data System (ADS)

    Caron, Filip; Vanthienen, Jan

    2016-09-01

    The business process management literature describes a multitude of approaches (e.g. imperative, declarative or event-driven) that each result in a different mix of process flexibility, compliance, effectiveness and efficiency. Although the use of a single approach over the process lifecycle is often assumed, transitions between approaches at different phases in the process lifecycle may also be considered. This article explores several business process strategies by analysing the approaches at different phases in the process lifecycle as well as the various transitions.

  20. Metagenomic approach for understanding microbial population from petroleum muck.

    PubMed

    Joshi, M N; Dhebar, S V; Dhebar, S V; Bhargava, P; Pandit, A S; Patel, R P; Saxena, A K; Bagatharia, S B

    2014-05-29

    Petroleum products play a major role in fueling the economy of the world but the pollution they create has become a critical issue. Understanding the diversity present in pipeline muck will help with the exploration of new microbial strains with better hydrocarbon degrading capacities for bioremediation of polluted sites. This study provides an analysis of petroleum muck using next generation sequencing. Copyright © 2014 Joshi et al.

  1. Exploring Input Processing in the Classroom: An Experimental Comparison of Processing Instruction and Enriched Input

    ERIC Educational Resources Information Center

    Marsden, Emma

    2006-01-01

    The research reported here tests the claim made in the Input Processing approach to second language (L2) acquisition that interpreting the meaning of language form is essential for learning. This claim has been put forward as an underlying part of the pedagogical package known as Processing Instruction (PI) (VanPatten, 1996, 2002a, 2004). Two…

  2. Exploring Input Processing in the Classroom: An Experimental Comparison of Processing Instruction and Enriched Input

    ERIC Educational Resources Information Center

    Marsden, Emma

    2006-01-01

    The research reported here tests the claim made in the Input Processing approach to second language (L2) acquisition that interpreting the meaning of language form is essential for learning. This claim has been put forward as an underlying part of the pedagogical package known as Processing Instruction (PI) (VanPatten, 1996, 2002a, 2004). Two…

  3. Review of Exploration Systems Development (ESD) Integrated Hazard Development Process. Appendices; Volume 2

    NASA Technical Reports Server (NTRS)

    Smiles, Michael D.; Blythe, Michael P.; Bejmuk, Bohdan; Currie, Nancy J.; Doremus, Robert C.; Franzo, Jennifer C.; Gordon, Mark W.; Johnson, Tracy D.; Kowaleski, Mark M.; Laube, Jeffrey R.

    2015-01-01

    The Chief Engineer of the Exploration Systems Development (ESD) Office requested that the NASA Engineering and Safety Center (NESC) perform an independent assessment of the ESD's integrated hazard development process. The focus of the assessment was to review the integrated hazard analysis (IHA) process and identify any gaps/improvements in the process (e.g. missed causes, cause tree completeness, missed hazards). This document contains the outcome of the NESC assessment.

  4. Review of Exploration Systems Development (ESD) Integrated Hazard Development Process. Volume 1; Appendices

    NASA Technical Reports Server (NTRS)

    Smiles, Michael D.; Blythe, Michael P.; Bejmuk, Bohdan; Currie, Nancy J.; Doremus, Robert C.; Franzo, Jennifer C.; Gordon, Mark W.; Johnson, Tracy D.; Kowaleski, Mark M.; Laube, Jeffrey R.

    2015-01-01

    The Chief Engineer of the Exploration Systems Development (ESD) Office requested that the NASA Engineering and Safety Center (NESC) perform an independent assessment of the ESD's integrated hazard development process. The focus of the assessment was to review the integrated hazard analysis (IHA) process and identify any gaps/improvements in the process (e.g., missed causes, cause tree completeness, missed hazards). This document contains the outcome of the NESC assessment.

  5. Sedimentology and petroleum geology

    SciTech Connect

    Bjorlykke, K.

    1989-01-01

    In this introduction to sedimentology and petroleum geology the subjects, which are closely related but mostly treated separately, are integrated. The first part covers the basic aspects of sedimentology, sedimentary geochemistry and diagenesis, including brief discussions of flow in rivers and channels, types of sediment transport, lake and river deposits, deltas (river-dominated, tide-dominated, and wave-dominated) and the water budget. Principles of stratigraphy, seismic stratigraphy and basin modeling form the basis for the last part on petroleum geology. Here subjects include the composition of kerogen and hydrocarbons, theories of migration and trapping of hydrocarbons and properties of reservoir rocks. Finally, short introductions to well logging and production geology are given.

  6. The potential for low petroleum gasoline

    SciTech Connect

    Hadder, G.R.; Webb, G.M.; Clauson, M.

    1996-06-01

    The Energy Policy Act requires the Secretary of Energy to determine the feasibility of producing sufficient replacement fuels to replace at least 30 percent of the projected consumption of motor fuels by light duty vehicles in the year 2010. The Act also requires the Secretary to determine the greenhouse gas implications of the use of replacement fuels. A replacement fuel is a non-petroleum portion of gasoline, including certain alcohols, ethers, and other components. The Oak Ridge National Laboratory Refinery Yield Model has been used to study the cost and refinery impacts for production of {open_quotes}low petroleum{close_quotes} gasolines, which contain replacement fuels. The analysis suggests that high oxygenation is the key to meeting the replacement fuel target, and a major contributor to cost increase is investment in processes to produce and etherify light olefins. High oxygenation can also increase the costs of control of vapor pressure, distillation properties, and pollutant emissions of gasolines. Year-round low petroleum gasoline with near-30 percent non-petroleum components might be produced with cost increases of 23 to 37 cents per gallon of gasoline, and with greenhouse gas emissions changes between a 3 percent increase and a 16 percent decrease. Crude oil reduction, with decreased dependence on foreign sources, is a major objective of the low petroleum gasoline program. For year-round gasoline with near-30 percent non-petroleum components, crude oil use is reduced by 10 to 12 percent, at a cost $48 to $89 per barrel. Depending upon resolution of uncertainties about extrapolation of the Environmental Protection Agency Complex Model for pollutant emissions, availability of raw materials and other issues, costs could be lower or higher.

  7. Updated estimation of energy efficiencies of U.S. petroleum refineries.

    SciTech Connect

    Palou-Rivera, I.; Wang, M. Q.

    2010-12-08

    Evaluation of life-cycle (or well-to-wheels, WTW) energy and emission impacts of vehicle/fuel systems requires energy use (or energy efficiencies) of energy processing or conversion activities. In most such studies, petroleum fuels are included. Thus, determination of energy efficiencies of petroleum refineries becomes a necessary step for life-cycle analyses of vehicle/fuel systems. Petroleum refinery energy efficiencies can then be used to determine the total amount of process energy use for refinery operation. Furthermore, since refineries produce multiple products, allocation of energy use and emissions associated with petroleum refineries to various petroleum products is needed for WTW analysis of individual fuels such as gasoline and diesel. In particular, GREET, the life-cycle model developed at Argonne National Laboratory with DOE sponsorship, compares energy use and emissions of various transportation fuels including gasoline and diesel. Energy use in petroleum refineries is key components of well-to-pump (WTP) energy use and emissions of gasoline and diesel. In GREET, petroleum refinery overall energy efficiencies are used to determine petroleum product specific energy efficiencies. Argonne has developed petroleum refining efficiencies from LP simulations of petroleum refineries and EIA survey data of petroleum refineries up to 2006 (see Wang, 2008). This memo documents Argonne's most recent update of petroleum refining efficiencies.

  8. Petroleum supply monthly: April 1996, with data from February 1996

    SciTech Connect

    1996-04-01

    Data presented in this report describe the supply and disposition of petroleum products in the US and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the US (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the US. The tables and figures in the Summary Statistics section of the report present a time series of selected petroleum data on a US level. The Detailed Statistics tables present statistics for the most current month available as well as year-to-date. In most cases, the statistics are presented for several geographic areas--the US (50 States and the District of Columbia), five PAD districts, and 12 Refining Districts. A future article gives a summer 1996 gasoline assessment. 16 figs., 66 tabs.

  9. Petroleum supply monthly, February 1995, with data for December 1994

    SciTech Connect

    1995-02-27

    Data presented in the Petroleum Supply Monthly (PSM) describe the supply and disposition of petroleum products in the US and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the US (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics. The tables and figures in the Summary Statistics section of the PSM present a time series of selected petroleum data on a US level. The detailed Statistics tables of the PSM present statistics for the most current month available as well as year-to-date. In most cases, the statistics are presented for several geographic areas--the US (50 States and the District of Columbia), five PAD Districts, and 12 Refining Districts. 16 figs., 66 tabs.

  10. Frontier petroleum basins of Colombia

    SciTech Connect

    Keith, J.F. Jr.; Perez, V.E.

    1989-03-01

    The frontier basins of Colombia with hydrocarbon potential are numerous, have varying geological histories, and are in different stages of exploration development. In this paper, sedimentary or structural basins are classified as frontier petroleum basins if commercial discoveries of hydrocarbons are lacking, if the basin has not attained a high degree of exploration development, or if a new play concept has been perceived or developed for a portion of a mature exploration basin. Using these criteria for classification, the authors discuss the Cauca-Patia Choco-Pacifico, and Lower Magdalena basin complexes; the Cordillera Oriental foreland basin; and the Cesar-Rancheria, Sabana, and Amazonas basins. A comprehensive geological and structural setting of each of these frontier basins will be presented. The depositional and tectonic evolution of the basins will be highlighted, and the play concepts for each will be inventoried, catalogued, and categorized as to whether they are theoretical or established. The discussion of the available plays in each of these basins will include the main play concept elements of reservoirs traps, seals, source rocks, maturation, and timing. When detailed data permit, the reservoir and trap geometry will be presented.

  11. Norwegian petroleum guide

    SciTech Connect

    Christie, H.B.

    1984-01-01

    This is about the comprehensive guide to Norwegian oil and gas activities, very useful to anyone in the industry. Material includes political guidelines, control institutions, work possibilities and licenses, working environment law, employer and employee organizations, national insurance, taxes, communication, rescue operations and standby. Contents: Oil and the economy; Petroleum technology research; Responsibilities of different authorities; The Labour Inspection Directorate; The Health Directorate Offshore Office; The Coastal Directorate; Helicopter traffic; The Norwegian Petroleum Directorate; The Maritime Directorate; Det norske Veritas; The Norwegian Waterways and Electricity Board; The State Institute for Radiation Hygiene; The State Explosive Inspection; Work possibilities in the North Sea; Working environment legislation on the Continental Shelf; Collective bargaining agreements, labor conflicts and the right to organize; Taxation Rules; National health insurance and the petroleum activity; Occupational injuries on the Norwegian Continental Shelf; Company insurances; The private pension scheme; Other types of insuracne common among oil companies; The rescue service in Norway; Oganizations within the oil industry offshore and onshore; and Law of aliens admission to the Kindgom.

  12. Biosurfactants: Promising Molecules for Petroleum Biotechnology Advances.

    PubMed

    De Almeida, Darne G; Soares Da Silva, Rita de Cássia F; Luna, Juliana M; Rufino, Raquel D; Santos, Valdemir A; Banat, Ibrahim M; Sarubbo, Leonie A

    2016-01-01

    The growing global demand for sustainable technologies that improves the efficiency of petrochemical processes in the oil industry has driven advances in petroleum biotechnology in recent years. Petroleum industry uses substantial amounts of petrochemical-based synthetic surfactants in its activities as mobilizing agents to increase the availability or recovery of hydrocarbons as well as many other applications related to extraction, treatment, cleaning, and transportation. However, biosurfactants have several potential applications for use across the oil processing chain and in the formulations of petrochemical products such as emulsifying/demulsifying agents, anticorrosive, biocides for sulfate-reducing bacteria, fuel formulation, extraction of bitumen from tar sands, and many other innovative applications. Due to their versatility and proven efficiency, biosurfactants are often presented as valuable versatile tools that can transform and modernize petroleum biotechnology in an attempt to provide a true picture of state of the art and directions or use in the oil industry. We believe that biosurfactants are going to have a significant role in many future applications in the oil industries and in this review therefore, we highlight recent important relevant applications, patents disclosures and potential future applications for biosurfactants in petroleum and related industries.

  13. Biosurfactants: Promising Molecules for Petroleum Biotechnology Advances

    PubMed Central

    De Almeida, Darne G.; Soares Da Silva, Rita de Cássia F.; Luna, Juliana M.; Rufino, Raquel D.; Santos, Valdemir A.; Banat, Ibrahim M.; Sarubbo, Leonie A.

    2016-01-01

    The growing global demand for sustainable technologies that improves the efficiency of petrochemical processes in the oil industry has driven advances in petroleum biotechnology in recent years. Petroleum industry uses substantial amounts of petrochemical-based synthetic surfactants in its activities as mobilizing agents to increase the availability or recovery of hydrocarbons as well as many other applications related to extraction, treatment, cleaning, and transportation. However, biosurfactants have several potential applications for use across the oil processing chain and in the formulations of petrochemical products such as emulsifying/demulsifying agents, anticorrosive, biocides for sulfate-reducing bacteria, fuel formulation, extraction of bitumen from tar sands, and many other innovative applications. Due to their versatility and proven efficiency, biosurfactants are often presented as valuable versatile tools that can transform and modernize petroleum biotechnology in an attempt to provide a true picture of state of the art and directions or use in the oil industry. We believe that biosurfactants are going to have a significant role in many future applications in the oil industries and in this review therefore, we highlight recent important relevant applications, patents disclosures and potential future applications for biosurfactants in petroleum and related industries. PMID:27843439

  14. THE SOLAR TRANSFORMITY OF OIL AND PETROLEUM NATURAL GAS

    EPA Science Inventory

    This paper presents an emergy evaluation of the biogeochemical process of petroleum formation. Unlike the previous calculation, in which the transformity of crude oil was back calculated from the relative efficiency of electricity production and factors relating coal to transport...

  15. THE SOLAR TRANSFORMITY OF OIL AND PETROLEUM NATURAL GAS

    EPA Science Inventory

    This paper presents an emergy evaluation of the biogeochemical process of petroleum formation. Unlike the previous calculation, in which the transformity of crude oil was back calculated from the relative efficiency of electricity production and factors relating coal to transport...

  16. Petroleum Market Model of the National Energy Modeling System

    SciTech Connect

    1997-01-01

    The purpose of this report is to define the objectives of the Petroleum Market Model (PMM), describe its basic approach, and provide detail on how it works. This report is intended as a reference document for model analysts, users, and the public. The PMM models petroleum refining activities, the marketing of petroleum products to consumption regions. The production of natural gas liquids in gas processing plants, and domestic methanol production. The PMM projects petroleum product prices and sources of supply for meeting petroleum product demand. The sources of supply include crude oil, both domestic and imported; other inputs including alcohols and ethers; natural gas plant liquids production; petroleum product imports; and refinery processing gain. In addition, the PMM estimates domestic refinery capacity expansion and fuel consumption. Product prices are estimated at the Census division level and much of the refining activity information is at the Petroleum Administration for Defense (PAD) District level. This report is organized as follows: Chapter 2, Model Purpose; Chapter 3, Model Overview and Rationale; Chapter 4, Model Structure; Appendix A, Inventory of Input Data, Parameter Estimates, and Model Outputs; Appendix B, Detailed Mathematical Description of the Model; Appendix C, Bibliography; Appendix D, Model Abstract; Appendix E, Data Quality; Appendix F, Estimation methodologies; Appendix G, Matrix Generator documentation; Appendix H, Historical Data Processing; and Appendix I, Biofuels Supply Submodule.

  17. FRACTURED PETROLEUM RESERVOIRS

    SciTech Connect

    Abbas Firoozabadi

    1999-06-11

    different from that of gas displacement processes. The work is of experimental nature and clarifies several misconceptions in the literature. Based on experimental results, it is established that the main reason for high efficiency of solution gas drive from heavy oil reservoirs is due to low gas mobility. Chapter III presents the concept of the alteration of porous media wettability from liquid-wetting to intermediate gas-wetting. The idea is novel and has not been introduced in the petroleum literature before. There are significant implications from such as proposal. The most direct application of intermediate gas wetting is wettability alteration around the wellbore. Such an alteration can significantly improve well deliverability in gas condensate reservoirs where gas well deliverability decreases below dewpoint pressure. Part I of Chapter III studies the effect of gravity, viscous forces, interfacial tension, and wettability on the critical condensate saturation and relative permeability of gas condensate systems. A simple phenomenological network model is used for this study, The theoretical results reveal that wettability significantly affects both the critical gas saturation and gas relative permeability. Gas relative permeability may increase ten times as contact angle is altered from 0{sup o} (strongly liquid wet) to 85{sup o} (intermediate gas-wetting). The results from the theoretical study motivated the experimental investigation described in Part II. In Part II we demonstrate that the wettability of porous media can be altered from liquid-wetting to gas-wetting. This part describes our attempt to find appropriate chemicals for wettability alteration of various substrates including rock matrix. Chapter IV provides a comprehensive treatment of molecular, pressure, and thermal diffusion and convection in porous media Basic theoretical analysis is presented using irreversible thermodynamics.

  18. Preparation, characterization and photocatalytic application of TiO2/Fe-ZSM-5 nanocomposite for the treatment of petroleum refinery wastewater: Optimization of process parameters by response surface methodology.

    PubMed

    Ghasemi, Zahra; Younesi, Habibollah; Zinatizadeh, Ali Akbar

    2016-09-01

    Photocatalytic degradation of organic contaminants from petroleum refinery wastewater under UV and sunlight was investigated by immobilizing nanosized TiO2 photocatalyst into the structure of as-synthesized Fe-ZSM-5 zeolite via sol-gel method. Pure phase of TiO2/Fe-ZSM-5 photocatalyst with specific surface area of 304.6 m(2) g(-1) and loaded TiO2 of 29.28% was successfully synthesized. Effects of various operational parameters on treatment process were investigated by use of Response Surface Methodology (RSM). Maximum reduction of 80% COD was achieved at pH of 4, a photocatalyst concentration of 2.1 g l(-1), temperature of 45 °C and UV exposure time of 240 min. Gas chromatography-mass demonstrated an apparent shift in molecular weight from a higher fraction to a lower fraction even under sunlight. It is expected that the prepared photocatalyst is able to use ultraviolet and visible light energy. Results indicated that removal of COD degradation did not decrease as the reuse cycle of photocatalyst increased. Moreover, the potential to use sunlight energy and the simplicity of operation make photocatalysis an attractive prospect in terms of petroleum refinery wastewater treatment.

  19. Interactive chemistry of coal-petroleum processing: Quarterly progress report for March 15, 1987-June 15, 1987. [Effect of coal or resid on reaction

    SciTech Connect

    Curtis, C.W.; Guin, J.A.; Tarrer, A.R.

    1987-01-01

    The thermal reactions of model compounds NAPH, DMC, PN, BZT, and QN with Maya TLR (topped long resid) showed no reactions. The presence of Maya TLR blocked the intermediate hydrogenation pathway from QN to THQ compared to the reaction without Maya TLR where 13% THQ was formed. Maya TLR served as a strong inhibitor in the catalytic hydrogenations of model compounds, being more detrimental to the hydrogenation and heteroatom removal reactions than coal. The severe inhibition of Maya TLR is caused by the chemical composition of the resid. The resid contains large refractory hydrocarbon species and substantial amounts of metals. Maya TLR was most likely deactivating the NiMo/Al/sub 2/O/sub 3/ catalyst as well as possibly interacting with model species present. Catalyst deactivation due to pore-plugging by petroleum crude and residua reaction products from hydrotreating, i.e., metal sulfides and coke has been studied by Newson. In crude oils and residua, vanadium and nickel compounds are the most abundant organometallic constituents and cause major problems in hydrotreating of residuum oils. At hydroprocessing conditions, these metal compounds deposit on and deactivate the catalyst. Pore mouth plugging in the catalyst by the metal deposit has been known as the major cause in the catalyst deactivation. Tamm and co-workers studied two mechanisms of catalyst deactivation by petroleum feed metals: (1) poisoning of the active surface and (2) physical obstruction of the pore structure. Thus, two possible reasons for the severe deactivation observed in the Maya TLR are metal deposition and carbon laydown on the catalyst surface. Another reason why the Maya TLR had a stronger inhibiting effect than coal is that these reactions are at 350/sup 0/C, where the coal was only partially dissolved; therefore, all the bad actors from coal were not available in the system, while those from the resid were. 3 refs., 4 figs., 36 tabs.

  20. Microbial degradation of petroleum hydrocarbons.

    PubMed

    Varjani, Sunita J

    2017-01-01

    Petroleum hydrocarbon pollutants are recalcitrant compounds and are classified as priority pollutants. Cleaning up of these pollutants from environment is a real world problem. Bioremediation has become a major method employed in restoration of petroleum hydrocarbon polluted environments that makes use of natural microbial biodegradation activity. Petroleum hydrocarbons utilizing microorganisms are ubiquitously distributed in environment. They naturally biodegrade pollutants and thereby remove them from the environment. Removal of petroleum hydrocarbon pollutants from environment by applying oleophilic microorganisms (individual isolate/consortium of microorganisms) is ecofriendly and economic. Microbial biodegradation of petroleum hydrocarbon pollutants employs the enzyme catalytic activities of microorganisms to enhance the rate of pollutants degradation. This article provides an overview about bioremediation for petroleum hydrocarbon pollutants. It also includes explanation about hydrocarbon metabolism in microorganisms with a special focus on new insights obtained during past couple of years. Copyright © 2016 Elsevier Ltd. All rights reserved.

  1. Petroleum marketing monthly, September 1994

    SciTech Connect

    Not Available

    1994-09-01

    The Petroleum Marketing Monthly (PMM) provides information and statistical data on a variety of crude oils and refined petroleum products. The publication presents statistics on crude oil costs and refined petroleum product sales for use by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the f.o.b. and landed cost of imported crude oil, and the refiners` acquisition cost of crude oil. Refined petroleum product sales data include motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane. The Petroleum Marketing Division, Office of Oil and Gas, Energy Information Administration ensures the accuracy, quality, and confidentiality of the published data in the Petroleum Marketing Monthly.

  2. Petroleum marketing monthly, August 1994

    SciTech Connect

    Not Available

    1994-08-15

    The Petroleum Marketing Monthly (PMM) provides information and statistical data on a variety of crude oils and refined petroleum products. The publication presents statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the f.o.b. and landed cost of imported crude oil, and the refiners` acquisition cost of crude oil. Refined petroleum product Sales data include motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane. The Petroleum Marketing Division, Office of Oil and Gas, Energy Information Administration ensures the accuracy, quality, and confidentiality of the published data in the Petroleum Marketing Monthly.

  3. The Novo-Ufa Petroleum Refinery, Inc. (NOVOIL)

    SciTech Connect

    Karakuts, V.N.

    1995-07-01

    The Novo-Ufa Petroleum Refinery, Inc. (NOVOIL) is one of the largest enterprises of the Russian Federation in terms of output of high-quality petroleum products. This refinery has been operating successfully for more than 40 years: the first tonnes of gasoline were produced on July 25, 1951. The present-day refinery flow plan provides for complex processing to cut deep into the barrel of crude, with extensive use of highly effective hydrogenation processes.

  4. Opportunities for petroleum company leadership in host nations sustainable petroleum economic development business

    SciTech Connect

    Stultz-Karim, S.P.

    1995-12-31

    This paper examines the dynamic international political economic environment in which petroleum exploration and production companies must operate when considering investments in the economically transitional nations of the former Soviet Union or developing nations In this period of critical global changes low oil prices is only one factor with which petroleum companies Must be. concerned in their investment decisions Other factors include the transition from a bipolar world to a multipolar world of free trade zones. the general malaise of the international economy public and political recognition that nations and industries can no longer practice environmental {open_quotes}beggar-thy-neighbor{close_quotes} policies, and the rejection of aggregate national economic growth policies for sustainable economic development policies in both the Developed and developing world This paper focuses on actions which investing petroleum exploration and production companies can take in order to gain a leadership role in the sustainable Petroleum economic development business, to work with host countries regulations, and to develop a cooperative environment with host countries so that both the investing company and the host country can progress, not just survive.

  5. Strategic Petroleum Reserve quarterly report

    SciTech Connect

    Not Available

    1990-08-15

    The Strategic Petroleum Reserve Quarterly Report is submitted in accordance with section 165(b) of the Energy Policy and Conservation Act, as amended, which requires that the Secretary of Energy submit quarterly reports to Congress on Activities undertaken with respect to the Strategic Petroleum Reserve. This August 15, 1990, Strategic Petroleum Reserve Quarterly Report describes activities related to the site development, oil acquisition, budget and cost of the Reserve during the period April 1, 1990, through June 30, 1990. 3 tabs.

  6. Petroleum marketing monthly, December 1995

    SciTech Connect

    1995-12-05

    This publication provides information and statistical data on a variety of crude oils and refined petroleum products. It presents statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include domestic first purchase price, f.o.b. and landed cost of imported crude, and refiners` acquisition cost of crude. Refined petroleum product sales data include motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane.

  7. An Attractive Materials Process: Exploring High Magnetic Field Processing for Developing Customized Microstructures with Enhanced Performance

    SciTech Connect

    Ludtka, Gail Mackiewicz-; Ludtka, Gerard Michael; Jaramillo, Roger A; Wilgen, John B; Kisner, Roger A

    2007-01-01

    Multiple facets of an innovative research endeavor involving high magnetic field processing will be highlighted for this very promising technology initiative for materials and process development. This approach has both scientific and industrial relevance with significant energy savings and environmental benefit ramifications and represents a major step towards achieving materials by design goals for the next generation of materials encompassing both structural and functional material applications. Our experimental and modeling research efforts are clearly demonstrating that phase stability (conventional phase diagrams) can be dramatically altered through the application of an ultrahigh magnetic field. This ability to selectively control microstructural stability and alter transformation kinetics through appropriate selection of the magnetic field strength is being shown to provide a very robust mechanism to develop and tailor enhanced microstructures (even potential bulk nanostructures through accelerated product phase nucleation and transformation kinetics) with potentially superior properties. The broad goals for this research are to demonstrate and document the influence of ultrahigh magnetic field processing on the phase equilibria and kinetics for ferromagnetic and paramagnetic material systems and to develop predictive capability based on first principle calculations.

  8. Visualizing petroleum systems with a combination of GIS and multimedia technologies: An example from the West Siberia Basin

    SciTech Connect

    Walsh, D.B.; Grace, J.D. )

    1996-01-01

    Petroleum system studies provide an ideal application for the combination of Geographic Information System (GIS) and multimedia technologies. GIS technology is used to build and maintain the spatial and tabular data within the study region. Spatial data may comprise the zones of active source rocks and potential reservoir facies. Similarly, tabular data include the attendant source rock parameters (e.g. pyroloysis results, organic carbon content) and field-level exploration and production histories for the basin. Once the spatial and tabular data base has been constructed, GIS technology is useful in finding favorable exploration trends, such as zones of high organic content, mature source rocks in positions adjacent to sealed, high porosity reservoir facies. Multimedia technology provides powerful visualization tools for petroleum system studies. The components of petroleum system development, most importantly generation, migration and trap development typically span periods of tens to hundreds of millions of years. The ability to animate spatial data over time provides an insightful alternative for studying the development of processes which are only captured in [open quotes]snapshots[close quotes] by static maps. New multimedia-authoring software provides this temporal dimension. The ability to record this data on CD-ROMs and allow user- interactivity further leverages the combination of spatial data bases, tabular data bases and time-based animations. The example used for this study was the Bazhenov-Neocomian petroleum system of West Siberia.

  9. Visualizing petroleum systems with a combination of GIS and multimedia technologies: An example from the West Siberia Basin

    SciTech Connect

    Walsh, D.B.; Grace, J.D.

    1996-12-31

    Petroleum system studies provide an ideal application for the combination of Geographic Information System (GIS) and multimedia technologies. GIS technology is used to build and maintain the spatial and tabular data within the study region. Spatial data may comprise the zones of active source rocks and potential reservoir facies. Similarly, tabular data include the attendant source rock parameters (e.g. pyroloysis results, organic carbon content) and field-level exploration and production histories for the basin. Once the spatial and tabular data base has been constructed, GIS technology is useful in finding favorable exploration trends, such as zones of high organic content, mature source rocks in positions adjacent to sealed, high porosity reservoir facies. Multimedia technology provides powerful visualization tools for petroleum system studies. The components of petroleum system development, most importantly generation, migration and trap development typically span periods of tens to hundreds of millions of years. The ability to animate spatial data over time provides an insightful alternative for studying the development of processes which are only captured in {open_quotes}snapshots{close_quotes} by static maps. New multimedia-authoring software provides this temporal dimension. The ability to record this data on CD-ROMs and allow user- interactivity further leverages the combination of spatial data bases, tabular data bases and time-based animations. The example used for this study was the Bazhenov-Neocomian petroleum system of West Siberia.

  10. Application of electrochemical technology for removing petroleum hydrocarbons from produced water using lead dioxide and boron-doped diamond electrodes.

    PubMed

    Gargouri, Boutheina; Gargouri, Olfa Dridi; Gargouri, Bochra; Trabelsi, Souhel Kallel; Abdelhedi, Ridha; Bouaziz, Mohamed

    2014-12-01

    Although diverse methods exist for treating polluted water, the most promising and innovating technology is the electrochemical remediation process. This paper presents the anodic oxidation of real produced water (PW), generated by the petroleum exploration of the Petrobras plant-Tunisia. Experiments were conducted at different current densities (30, 50 and 100 mA cm(-2)) using the lead dioxide supported on tantalum (Ta/PbO2) and boron-doped diamond (BDD) anodes in an electrolytic batch cell. The electrolytic process was monitored by the chemical oxygen demand (COD) and the residual total petroleum hydrocarbon [TPH] in order to know the feasibility of electrochemical treatment. The characterization and quantification of petroleum wastewater components were performed by gas chromatography mass spectrometry. The COD removal was approximately 85% and 96% using PbO2 and BDD reached after 11 and 7h, respectively. Compared with PbO2, the BDD anode showed a better performance to remove petroleum hydrocarbons compounds from produced water. It provided a higher oxidation rate and it consumed lower energy. However, the energy consumption and process time make useless anodic oxidation for the complete elimination of pollutants from PW. Cytotoxicity has shown that electrochemical oxidation using BDD could be efficiently used to reduce more than 90% of hydrocarbons compounds. All results suggest that electrochemical oxidation could be an effective approach to treat highly concentrated organic pollutants present in the industrial petrochemical wastewater and significantly reduce the cost and time of treatment.

  11. Petroleum Market Model of the National Energy Modeling System. Part 1

    SciTech Connect

    1997-12-18

    The purpose of this report is to define the objectives of the Petroleum Market Model (PMM), describe its basic approach, and provide detail on how it works. This report is intended as a reference document for model analysts, users, and the public. The PMM models petroleum refining activities, the marketing of petroleum products to consumption regions, the production of natural gas liquids in gas processing plants, and domestic methanol production. The PMM projects petroleum product prices and sources of supply for meeting petroleum product demand. The sources of supply include crude oil, both domestic and imported; other inputs including alcohols and ethers; natural gas plant liquids production; petroleum product imports; and refinery processing gain. In addition, the PMM estimates domestic refinery capacity expansion and fuel consumption. Product prices are estimated at the Census division level and much of the refining activity information is at the Petroleum Administration for Defense (PAD) District level.

  12. Petroleum supply monthly: December 1993

    SciTech Connect

    Not Available

    1993-12-01

    Data are presented which describe the supply and disposition of petroleum products in the United States and major U.S. geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States. Data are presented in two sections: Summary Statistics, presenting a time series of selected petroleum data on a U.S. level, and Detailed Statistics, presenting statistics for the most current month available as well as year to date.

  13. Microcomputer-based digital image processing - A tutorial package for exploration geologists

    NASA Technical Reports Server (NTRS)

    Harrington, J. A., Jr.; Cartin, K. F.

    1985-01-01

    An Apple II microcomputer-based software package for analysis of digital data developed at the University of Oklahoma, the Digital Image Analysis System (DIAS), provides a relatively low-cost, portable alternative to large, dedicated minicomputers for digital image processing education. Digital processing techniques for analysis of Landsat MSS data and a series of tutorial exercises for exploration geologists are described and evaluated. DIAS allows in-house training that does not interfere with computer-based prospect analysis objectives.

  14. Microcomputer-based digital image processing - A tutorial package for exploration geologists

    NASA Technical Reports Server (NTRS)

    Harrington, J. A., Jr.; Cartin, K. F.

    1985-01-01

    An Apple II microcomputer-based software package for analysis of digital data developed at the University of Oklahoma, the Digital Image Analysis System (DIAS), provides a relatively low-cost, portable alternative to large, dedicated minicomputers for digital image processing education. Digital processing techniques for analysis of Landsat MSS data and a series of tutorial exercises for exploration geologists are described and evaluated. DIAS allows in-house training that does not interfere with computer-based prospect analysis objectives.

  15. Petroleum geology of Solimoes Basin, Brazil

    SciTech Connect

    Campos, J.N.P.; Meister, E.M.; Pereira, C.A.G.; Murakami, C.Y. )

    1993-02-01

    Solimoes basin is located at the northwestern portion of the South American continent, adjacent to a subandean pericratonic belt. It constitutes a Paleozoic intracratonic basin covering an area of about 600,000 km[sup 2] and displaying a maximum sedimentary thickness of 3400 m. The tectono-sedimentary evolution can be largely related with important events that occurred at the western border of the continent. The regional flexural subsidence and tectonic deformation observed are correlated to two major phases: Pre-Andean (Paleozoic) and Andean (Mesozoic and Cenozoic). In the Andean phase, compression with shear components, of Triassic age, known as the Jurua Tectonism, became very important for oil exploration of the basin. The stratigraphic conditions considered of greatest interest for petroleum exploration comprise Devonian gas and oil sourcing shales and Carboniferous sandstones reservoirs with an evaporitic seal. The main traps are anticlines related to reverse faults. In this context, Petrobras discovered Jurua gas field in 1978 and the Rio Urucu gas and oil field in 1986. These were the first fields discovered in Brazilian Paleozoic basins. Total petroleum fields discovered in Brazilian Paleozoic basins. Total petroleum reserves discovered represent 400 million bbl of equivalent oil. Present migration and accumulation call for previous accumulation in intrabasinal Paleozoic highs and related stratigraphic traps. Late tectonism seems to have resulted in redistribution and/or escape of fluids into new traps. Less disturbed areas are expected to contain original accumulations.

  16. Exploring Dyslexics' Phonological Deficit I: Lexical vs Sub-Lexical and Input vs Output Processes

    ERIC Educational Resources Information Center

    Szenkovits, Gayaneh; Ramus, Franck

    2005-01-01

    We report a series of experiments designed to explore the locus of the phonological deficit in dyslexia. Phonological processing of dyslexic adults is compared to that of age- and IQ-matched controls. Dyslexics' impaired performance on tasks involving nonwords suggests that sub-lexical phonological representations are deficient. Contrasting…

  17. Analysis of the premitting processes associated with exploration of Federal OCS leases. Final report

    SciTech Connect

    Not Available

    1980-11-01

    Under contract to the Office of Leasing Policy Development (LPDO), Jack Faucett Associates is currently undertaking the description and analysis of the Outer Continental Shelf (OCS) regulatory process to determine the nature of time delays that affect OCS production of oil and gas. This report represents the results of the first phase of research under this contract, the description and analysis of regulatory activity associated with exploration activities on the Federal OCS. Volume 1 contains the following three sections: (1) study results; (2) Federal regulatory activities during exploration of Federal OCS leases which involved the US Geological Survey, Environmental Protection Agency, US Coast Guard, Corps of Engineers, and National Ocean and Atmospheric Administration; and (3) state regulatory activities during exploration of Federal OCS leases of Alaska, California, Louisiana, Massachusetts, New Jersey, North Carolina, and Texas. Volume II contains appendices of US Geological Survey, Environmental Protection Agency, Coast Guard, Corps of Engineers, the Coastal Zone Management Act, and Alaska. The major causes of delay in the regulatory process governing exploration was summarized in four broad categories: (1) the long and tedious process associated with the Environmental Protection Agency's implementation of the National Pollutant Discharge Elimination System Permit; (2) the lack of mandated time periods for the completion of individual activities in the permitting process; (3) the lack of overall coordination of OCS exploratory regulation; and (4) the inexperience of states, the Federal government and industry relating to the appropriate level of regulation for first-time lease sale areas.

  18. Exploring the Process of Integrating the Internet into English Language Teaching

    ERIC Educational Resources Information Center

    Abdallah, Mahmoud Mohammad Sayed

    2007-01-01

    The present paper explores the process of integrating the Internet into the field of English language teaching in the light of the following points: the general importance of the Internet in our everyday lives shedding some light on the increasing importance of the Internet as a new innovation in our modern life; benefits of using the Internet in…

  19. Exploring the Critical Role of Motivation to Transfer in the Training Transfer Process

    ERIC Educational Resources Information Center

    Grohmann, Anna; Beller, Johannes; Kauffeld, Simone

    2014-01-01

    The present study aims at exploring the critical role of motivation to transfer within the training transfer process. In a sample of N?=?252 employees of one industrial company, one peer rating and several self-ratings of transfer were used to investigate the mediating role of motivation to transfer in the relationship between training…

  20. Exploring the Relationship between Human Resource Development Functions and the Mentoring Process: A Qualitative Study

    ERIC Educational Resources Information Center

    Cole, Ann F.; McArdle, Geri; Clements, Kimberly D.

    2005-01-01

    Human resource development professionals are in a unique position to help organizations achieve maximum positive impact and avoid legal difficulties when implementing mentoring programs. This case study explored a formal mentoring program that was data-based and linked to HRD in order to advance the mentoring process as an effective individual and…

  1. Exploring the Critical Role of Motivation to Transfer in the Training Transfer Process

    ERIC Educational Resources Information Center

    Grohmann, Anna; Beller, Johannes; Kauffeld, Simone

    2014-01-01

    The present study aims at exploring the critical role of motivation to transfer within the training transfer process. In a sample of N?=?252 employees of one industrial company, one peer rating and several self-ratings of transfer were used to investigate the mediating role of motivation to transfer in the relationship between training…

  2. Exploring Student Teachers' Views of Science Process Skills in Their Initial Teacher Education Programmes

    ERIC Educational Resources Information Center

    Molefe, Leonard; Stears, Michele; Hobden, Sally

    2016-01-01

    The South African secondary school curriculum emphasises the importance of science process skills in its respective natural sciences curricula. The purpose of this study was to explore the views of student teachers with regard to the importance they attach to these skills. A 14-item questionnaire was administered to 75 third- and fourth-year…

  3. Explorations of the viability of ARM and Xeon Phi for physics processing

    NASA Astrophysics Data System (ADS)

    Abdurachmanov, David; Arya, Kapil; Bendavid, Josh; Boccali, Tommaso; Cooperman, Gene; Dotti, Andrea; Elmer, Peter; Eulisse, Giulio; Giacomini, Francesco; Jones, Christopher D.; Manzali, Matteo; Muzaffar, Shahzad

    2014-06-01

    We report on our investigations into the viability of the ARM processor and the Intel Xeon Phi co-processor for scientific computing. We describe our experience porting software to these processors and running benchmarks using real physics applications to explore the potential of these processors for production physics processing.

  4. A Phenomenological Exploration of Superintendents' and Principals' Experiences in a Shared Professional Development Process

    ERIC Educational Resources Information Center

    Severson, John R.

    2013-01-01

    For this qualitative study, I explored and described how superintendents and principals interpreted and experienced a sustained professional development process focusing on instruction and student learning, a form of Elmore's Superintendents in the Classroom (SITC) Network. Specifically, I examined how the addition of principals in the SITC…

  5. Influence of Career Exploration Process Behaviors on Agriculture Students' Level of Career Certainty

    ERIC Educational Resources Information Center

    Esters, Levon T.

    2008-01-01

    The purpose of this study was to determine the extent to which career exploration process behaviors influence the level of career certainty of agriculture students. Data were gathered from 181 freshmen and 131 senior students enrolled in the College of Agriculture and Life Sciences at Iowa State University. Career certainty was assessed using…

  6. Brief Report: Exploring the Relationship between Sensory Processing and Repetitive Behaviours in Williams Syndrome

    ERIC Educational Resources Information Center

    Riby, Deborah M.; Janes, Emily; Rodgers, Jacqui

    2013-01-01

    This study explored the relationship between sensory processing abnormalities and repetitive behaviours in children with Williams Syndrome (WS; n = 21). This is a novel investigation bringing together two clinical phenomena for the first time in this neuro-developmental disorder. Parents completed the Sensory Profile (Short Form; Dunn in The…

  7. The Central Executive as a Search Process: Priming Exploration and Exploitation across Domains

    ERIC Educational Resources Information Center

    Hills, Thomas T.; Todd, Peter M.; Goldstone, Robert L.

    2010-01-01

    The trade-off between exploration and exploitation is common to a wide variety of problems involving search in space and mind. The prevalence of this trade-off and its neurological underpinnings led us to propose domain-general cognitive search processes (Hills, Todd, & Goldstone, 2008). We propose further that these are consistent with the…

  8. Markov Processes: Exploring the Use of Dynamic Visualizations to Enhance Student Understanding

    ERIC Educational Resources Information Center

    Pfannkuch, Maxine; Budgett, Stephanie

    2016-01-01

    Finding ways to enhance introductory students' understanding of probability ideas and theory is a goal of many first-year probability courses. In this article, we explore the potential of a prototype tool for Markov processes using dynamic visualizations to develop in students a deeper understanding of the equilibrium and hitting times…

  9. Brief Report: Exploring the Relationship between Sensory Processing and Repetitive Behaviours in Williams Syndrome

    ERIC Educational Resources Information Center

    Riby, Deborah M.; Janes, Emily; Rodgers, Jacqui

    2013-01-01

    This study explored the relationship between sensory processing abnormalities and repetitive behaviours in children with Williams Syndrome (WS; n = 21). This is a novel investigation bringing together two clinical phenomena for the first time in this neuro-developmental disorder. Parents completed the Sensory Profile (Short Form; Dunn in The…

  10. Markov Processes: Exploring the Use of Dynamic Visualizations to Enhance Student Understanding

    ERIC Educational Resources Information Center

    Pfannkuch, Maxine; Budgett, Stephanie

    2016-01-01

    Finding ways to enhance introductory students' understanding of probability ideas and theory is a goal of many first-year probability courses. In this article, we explore the potential of a prototype tool for Markov processes using dynamic visualizations to develop in students a deeper understanding of the equilibrium and hitting times…

  11. Exploring National Environmental Policy Act processes across federal land management agencies

    Treesearch

    Marc J. Stern; Michael J. Mortimer

    2009-01-01

    Broad discretion is granted at all levels throughout federal land management agencies regarding compliance with the National Environmental Policy Act (NEPA). We explored the diversity of procedures employed in NEPA processes across four agencies, the USDA Forest Service, The USDI National Park Service and Bureau of Land Management, and the U.S. Army Corps of Engineers...

  12. The National Petroleum Reserve-Alaska (NPRA) data archive

    USGS Publications Warehouse

    Bird, K.J.

    2001-01-01

    The area currently known as the National Petroleum ReserveAlaska was originally designated in 1923 as Naval Petroleum Reserve No. 4 (NPR4). It was one of four U.S. regions thought to contain significant amounts of oil that were to be reserved for national crises. Geographic and geologic knowledge of the NPR4 was only superficial in 1923. Earlier exploration, however, had shown that the region contained the ingredients necessary for oil accumulations to exist: source rocks, reservoir rocks, and geologic structures that could trap petroleum. Oil seeps on the coast and the size of the area (some 37,000 square miles, about the size of Indiana) reinforced the notion that significant quantities of petroleum were present.

  13. 19 CFR 151.47 - Optional entry of net quantity of petroleum or petroleum products.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 19 Customs Duties 2 2010-04-01 2010-04-01 false Optional entry of net quantity of petroleum or petroleum products. 151.47 Section 151.47 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF... Petroleum and Petroleum Products § 151.47 Optional entry of net quantity of petroleum or petroleum products...

  14. 31 CFR 542.412 - Transactions relating to Syrian petroleum or petroleum products from third countries...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... petroleum or petroleum products from third countries; transshipments. 542.412 Section 542.412 Money and... Syrian petroleum or petroleum products from third countries; transshipments. (a) Transactions relating to goods containing petroleum or petroleum products of Syrian origin are not prohibited by § 542.208...

  15. 19 CFR 151.47 - Optional entry of net quantity of petroleum or petroleum products.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 19 Customs Duties 2 2012-04-01 2012-04-01 false Optional entry of net quantity of petroleum or petroleum products. 151.47 Section 151.47 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF... Petroleum and Petroleum Products § 151.47 Optional entry of net quantity of petroleum or petroleum...

  16. 19 CFR 151.47 - Optional entry of net quantity of petroleum or petroleum products.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 19 Customs Duties 2 2013-04-01 2013-04-01 false Optional entry of net quantity of petroleum or petroleum products. 151.47 Section 151.47 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF... Petroleum and Petroleum Products § 151.47 Optional entry of net quantity of petroleum or petroleum...

  17. 19 CFR 151.47 - Optional entry of net quantity of petroleum or petroleum products.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 19 Customs Duties 2 2014-04-01 2014-04-01 false Optional entry of net quantity of petroleum or petroleum products. 151.47 Section 151.47 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF... Petroleum and Petroleum Products § 151.47 Optional entry of net quantity of petroleum or petroleum...

  18. 19 CFR 151.47 - Optional entry of net quantity of petroleum or petroleum products.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 19 Customs Duties 2 2011-04-01 2011-04-01 false Optional entry of net quantity of petroleum or petroleum products. 151.47 Section 151.47 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF... Petroleum and Petroleum Products § 151.47 Optional entry of net quantity of petroleum or petroleum...

  19. Petroleum resins and their production

    SciTech Connect

    Luvinh, Q.

    1989-04-25

    A process is described for the production of petroleum resins compatible with base polymers in hot melt formulations and having a softening point of from about 60/sup 0/C. to about 120/sup 0/C. and Gardner color of about 4 or less, comprising copolymerizing using a Friedel-Crafts catalyst. The mixture is substantially free form cyclopentadiene and dicyclopentadiene. This patent also describes a resin consisting essentially of a copolymer containing from 5 to 80 wt. % of units derived from an olefinically unsaturated aromatic compound form 5 to 80 wt. % of units derived from C/sub 5/ olefines or diolefines or C/sub 6/ olefines diolefines or a mixture of C/sub 5/ and C/sub 6/ olefines or diolefines and from 7 to 45 wt. % of units derived from a terpene.

  20. National Petroleum Reserve-Alaska (NPRA) core images and well data

    USGS Publications Warehouse

    Houseknecht, D. W.

    2002-01-01

    This report contains photographic images and data from petroleum exploration wells drilled within and near the National Petroleum Reserve-Alaska (NPRA). The volume is organized into six chapters, each of which contains images and well data (including a GIS project of public domain cores) pertinent to the geology and petroleum potential of NPRA. This product is a compilation of data not available elsewhere and contains limited interpretive material.

  1. Underground petroleum tanks

    SciTech Connect

    Not Available

    1990-07-01

    This book presents the results of a survey of 46 state underground storage tank program officials. The survey covers: Whether petroleum tank insurance (mandated by the EPA) is available in each state and whether category 3 and 4 owners can obtain it; state programs that help owners meet the financial responsibility and/or technical requirements of such insurance; and lending institutions' attitudes towards providing loans to storage tank owners. A survey of the number and terms of insurance policies offered to tank owners is also presented.

  2. International petroleum statistics report

    SciTech Connect

    1995-10-01

    The International Petroleum Statistics Report is a monthly publication that provides current international oil data. This report presents data on international oil production, demand, imports, exports and stocks. The report has four sections. Section 1 contains time series data on world oil production, and on oil demand and stocks in the Organization for Economic Cooperation and Development (OECD). Section 2 presents an oil supply/demand balance for the world, in quarterly intervals for the most recent two years. Section 3 presents data on oil imports by OECD countries. Section 4 presents annual time series data on world oil production and oil stocks, demand, and trade in OECD countries.

  3. Implementing NASA's Capability-Driven Approach: Insight into NASA's Processes for Maturing Exploration Systems

    NASA Technical Reports Server (NTRS)

    Williams-Byrd, Julie; Arney, Dale; Rodgers, Erica; Antol, Jeff; Simon, Matthew; Hay, Jason; Larman, Kevin

    2015-01-01

    NASA is engaged in transforming human spaceflight. The Agency is shifting from an exploration-based program with human activities focused on low Earth orbit (LEO) and targeted robotic missions in deep space to a more sustainable and integrated pioneering approach. Through pioneering, NASA seeks to address national goals to develop the capacity for people to work, learn, operate, live, and thrive safely beyond the Earth for extended periods of time. However, pioneering space involves more than the daunting technical challenges of transportation, maintaining health, and enabling crew productivity for long durations in remote, hostile, and alien environments. This shift also requires a change in operating processes for NASA. The Agency can no longer afford to engineer systems for specific missions and destinations and instead must focus on common capabilities that enable a range of destinations and missions. NASA has codified a capability driven approach, which provides flexible guidance for the development and maturation of common capabilities necessary for human pioneers beyond LEO. This approach has been included in NASA policy and is captured in the Agency's strategic goals. It is currently being implemented across NASA's centers and programs. Throughout 2014, NASA engaged in an Agency-wide process to define and refine exploration-related capabilities and associated gaps, focusing only on those that are critical for human exploration beyond LEO. NASA identified 12 common capabilities ranging from Environmental Control and Life Support Systems to Robotics, and established Agency-wide teams or working groups comprised of subject matter experts that are responsible for the maturation of these exploration capabilities. These teams, called the System Maturation Teams (SMTs) help formulate, guide and resolve performance gaps associated with the identified exploration capabilities. The SMTs are defining performance parameters and goals for each of the 12 capabilities

  4. Exploring the success of an integrated primary care partnership: a longitudinal study of collaboration processes.

    PubMed

    Valentijn, Pim P; Vrijhoef, Hubertus J M; Ruwaard, Dirk; de Bont, Antoinette; Arends, Rosa Y; Bruijnzeels, Marc A

    2015-01-22

    Forming partnerships is a prominent strategy used to promote integrated service delivery across health and social service systems. Evidence about the collaboration process upon which partnerships evolve has rarely been addressed in an integrated-care setting. This study explores the longitudinal relationship of the collaboration process and the influence on the final perceived success of a partnership in such a setting. The collaboration process through which partnerships evolve is based on a conceptual framework which identifies five themes: shared ambition, interests and mutual gains, relationship dynamics, organisational dynamics and process management. Fifty-nine out of 69 partnerships from a national programme in the Netherlands participated in this survey study. At baseline, 338 steering committee members responded, and they returned 320 questionnaires at follow-up. Multiple-regression-analyses were conducted to explore the relationship between the baseline as well as the change in the collaboration process and the final success of the partnerships. Mutual gains and process management were the most significant baseline predictors for the final success of the partnership. A positive change in the relationship dynamics had a significant effect on the final success of a partnership. Insight into the collaboration process of integrated primary care partnerships offers a potentially powerful way of predicting their success. Our findings underscore the importance of monitoring the collaboration process during the development of the partnerships in order to achieve their full collaborative advantage.

  5. NASA's M and S Accreditation Process Plan and Specification for Space Exploration

    NASA Technical Reports Server (NTRS)

    O'Neil, David; Hale, Joe

    2006-01-01

    NASA's Exploration Systems Mission Directorate (ESMD) is implementing a management approach for modeling and simulation (M&S) that will provide decision-makers information on the model's fidelity, credibility, and quality. This information will allow the decision-maker to understand the risks involved in using a model's results in the decision-making process. This presentation will discuss NASA's overall approach to achieving formal accreditation of its models or simulations supporting space exploration. The development of a formal Accreditation Plan is a key component in the preliminary activities for modeling and simulation (M&S) assessment. This presentation will describe NASA's process for identifying risks associated with M&S use and the associated M&S assessments that will dictate the level of data certification and M&S verification and validation (V&V) activities required to support the decision-making process. The M&S Accreditation Plan and Report templates for ESMD will also be illustrated.

  6. Probability theory versus simulation of petroleum potential in play analysis

    USGS Publications Warehouse

    Crovelli, R.A.

    1987-01-01

    An analytic probabilistic methodology for resource appraisal of undiscovered oil and gas resources in play analysis is presented. This play-analysis methodology is a geostochastic system for petroleum resource appraisal in explored as well as frontier areas. An objective was to replace an existing Monte Carlo simulation method in order to increase the efficiency of the appraisal process. Underlying the two methods is a single geologic model which considers both the uncertainty of the presence of the assessed hydrocarbon and its amount if present. The results of the model are resource estimates of crude oil, nonassociated gas, dissolved gas, and gas for a geologic play in terms of probability distributions. The analytic method is based upon conditional probability theory and a closed form solution of all means and standard deviations, along with the probabilities of occurrence. ?? 1987 J.C. Baltzer A.G., Scientific Publishing Company.

  7. Environmental hazard and risk characterisation of petroleum substances: a guided "walking tour" of petroleum hydrocarbons.

    PubMed

    Bierkens, Johan; Geerts, Lieve

    2014-05-01

    Petroleum substances are used in large quantities, primarily as fuels. They are complex mixtures whose major constituents are hydrocarbons derived from crude oil by distillation and fractionation. Determining the complete molecular composition of petroleum and its refined products is not feasible with current analytical techniques because of the huge number of molecular components. This complex nature of petroleum products, with their varied number of constituents, all of them exhibiting different fate and effect characteristics, merits a dedicated hazard and risk assessment approach. From a regulatory perspective they pose a great challenge in a number of REACH processes, in particular in the context of dossier and substance evaluation but also for priority setting activities. In order to facilitate the performance of hazard and risk assessment for petroleum substances the European oil company association, CONCAWE, has developed the PETROTOX and PETRORISK spreadsheet models. Since the exact composition of many petroleum products is not known, an underlying assumption of the PETROTOX and PETRORISK tools is that the behaviour and fate of a total petroleum substance can be simulated based on the physical-chemical properties of representative structures mapped to hydrocarbon blocks (HBs) and on the relative share of each HB in the total mass of the product. To assess how differing chemical compositions affect the simulated chemical fate and toxicity of hydrocarbon mixtures, a series of model simulations were run using an artificial petroleum substance, containing 386 (PETROTOX) or 160 (PETRORISK) HBs belonging to different chemical classes and molecular weight ranges, but with equal mass assigned to each of them. To this artificial petroleum substance a guided series of subsequent modifications in mass allocation to a delineated number of HBs belonging to different chemical classes and carbon ranges was performed, in what we perceived as a guided "walking tour

  8. International petroleum statistics report

    SciTech Connect

    1997-05-01

    The International Petroleum Statistics Report is a monthly publication that provides current international oil data. This report is published for the use of Members of Congress, Federal agencies, State agencies, industry, and the general public. Publication of this report is in keeping with responsibilities given the Energy Information Administration in Public Law 95-91. The International Petroleum Statistics Report presents data on international oil production, demand, imports, and stocks. The report has four sections. Section 1 contains time series data on world oil production, and on oil demand and stocks in the Organization for Economic Cooperation and Development (OECD). This section contains annual data beginning in 1985, and monthly data for the most recent two years. Section 2 presents an oil supply/demand balance for the world. This balance is presented in quarterly intervals for the most recent two years. Section 3 presents data on oil imports by OECD countries. This section contains annual data for the most recent year, quarterly data for the most recent two quarters, and monthly data for the most recent twelve months. Section 4 presents annual time series data on world oil production and oil stocks, demand, and trade in OECD countries. World oil production and OECD demand data are for the years 1970 through 1995; OECD stocks from 1973 through 1995; and OECD trade from 1985 through 1995.

  9. Exploring the Role of Usability in the Software Process: A Study of Irish Software SMEs

    NASA Astrophysics Data System (ADS)

    O'Connor, Rory V.

    This paper explores the software processes and usability techniques used by Small and Medium Enterprises (SMEs) that develop web applications. The significance of this research is that it looks at development processes used by SMEs in order to assess to what degree usability is integrated into the process. This study seeks to gain an understanding into the level of awareness of usability within SMEs today and their commitment to usability in practice. The motivation for this research is to explore the current development processes used by SMEs in developing web applications and to understand how usability is represented in those processes. The background for this research is provided by the growth of the web application industry beyond informational web sites to more sophisticated applications delivering a broad range of functionality. This paper presents an analysis of the practices of several Irish SMEs that develop web applications through a series of case studies. With the focus on SMEs that develop web applications as Management Information Systems and not E-Commerce sites, informational sites, online communities or web portals. This study gathered data about the usability techniques practiced by these companies and their awareness of usability in the context of the software process in those SMEs. The contribution of this study is to further the understanding of the current role of usability within the software development processes of SMEs that develop web applications.

  10. Environmental impact assessment in urban transport planning: Exploring process-related barriers in Spanish practice

    SciTech Connect

    Soria-Lara, Julio A. Bertolini, Luca Brömmelstroet, Marco te

    2015-01-15

    The effectiveness of EIA for evaluating transport planning projects is increasingly being questioned by practitioners, institutions and scholars. The academic literature has traditionally focused more on solving content-related problems with EIA (i.e. the measurement of environmental effects) than on process-related issues (i.e. the role of EIA in the planning process and the interaction between key actors). Focusing only on technical improvements is not sufficient for rectifying the effectiveness problems of EIA. In order to address this knowledge gap, the paper explores how EIA is experienced in the Spanish planning context and offers in-depth insight into EIA process-related issues in the field of urban transport planning. From the multitude of involved actors, the research focuses on exploring the perceptions of the two main professional groups: EIA developers and transport planners. Through a web-based survey we assess the importance of process-related barriers to the effective use of EIA in urban transport planning. The analyses revealed process issues based fundamentally on unstructured stakeholders involvement and an inefficient public participation - Highlights: • Qualitative research on perceptions of EIA participants on EIA processes. • Web-based survey with different participants (EIA-developers; transport planners). • It was seen an inefficient participation of stakeholders during the EIA processes.

  11. Job Prospects for Petroleum Engineers.

    ERIC Educational Resources Information Center

    Basta, Nicholas

    1988-01-01

    Describes petroleum engineering as one area in industry where job opportunities are few but where the worst of the declines has been seen. Discusses the causes of the decline. Lists several areas where petroleum engineers have found alternatives including environmental projects, water supply projects, and computer applications. (CW)

  12. Petroleum occurrences and plate tectonics

    SciTech Connect

    Olenin, V.B.; Sokolov, B.A.

    1983-01-01

    This paper analyzes the mechanisms of petroleum formation and petroleum accumulation proposed in recent years by some Russian and foreign investigators from the viewpoint of the new global or plate tectonics. On the basis of discussion and the facts, the authors conclude that the mechanisms proposed are in contradiction to reality and their use in practical application is at least premature.

  13. Job Prospects for Petroleum Engineers.

    ERIC Educational Resources Information Center

    Basta, Nicholas

    1988-01-01

    Describes petroleum engineering as one area in industry where job opportunities are few but where the worst of the declines has been seen. Discusses the causes of the decline. Lists several areas where petroleum engineers have found alternatives including environmental projects, water supply projects, and computer applications. (CW)

  14. Strategic petroleum reserve. Quarterly report

    SciTech Connect

    Not Available

    1994-05-15

    The Strategic Petroleum Reserve serves as one of our most important investments in reducing the Nation`s vulnerability to oil supply disruptions. Its existence provides an effective response mechanism should a disruption occur and a formidable deterrent to the use of oil as a political instrument. The Strategic Petroleum Reserve was created pursuant to the Energy Policy and Conservation Act of December 22, 1975, (Public Law 94-163) as amended, to reduce the impact of disruptions in supplies of petroleum products and to carry out obligations of the United States under the Agreement on an International Energy Program. Section 165(a) of the Act requires the submission of Annual Reports and Section 165(b)(1) requires the submission of Quarterly Reports. This Quarterly Report highlights activities undertaken during the first quarter of calendar year 1994, including: (1) inventory of petroleum products stored in the Reserve, under contract and in transit at the end of the calendar quarter; (2) fill rate for the current quarter and projected fill rate for the next calendar quarter; (3) average price of the petroleum products acquired during the calendar quarter; (4) current and projected storage capacity; (5) analysis of existing or anticipated problems with the acquisition and storage of petroleum products, and future expansion of storage capacity; (6) funds obligated by the Secretary from the SPR Petroleum Account and the Strategic Petroleum Reserve Account during the prior calendar quarter and in total; and (7) major environmental actions completed, in progress, or anticipated.

  15. Petroleum industry assists hurricane relief

    SciTech Connect

    Not Available

    1992-09-14

    This paper reports that the petroleum industry is aiding victims of last month's Hurricane Andrew with cash, clothing, food, water, and other supplies. Cash contributions announced as of last week totaled more than $2.7 million for distribution in South Florida and South Louisiana. Petroleum industry employees were collecting relief items such as bottled water and diapers for distribution in those areas.

  16. Potential applications of bioprocess technology in petroleum industry.

    PubMed

    Singh, Ajay; Singh, Brajesh; Ward, Owen

    2012-11-01

    Petroleum refining is traditionally based on the use of physicochemical processes such as distillation and chemical catalysis that operate under high temperatures and pressures conditions, which are energy intensive and costly. Biotechnology has become an important tool for providing new approaches in petroleum industry during oil production, refining and processing as well as managing environmentally safe pollutant remediation and disposal practices. Earlier biotechnology applications in the petroleum industry were limited to microbial enhanced oil recovery, applications of bioremediation to contaminated marine shorelines, soils and sludges. The potential role of bioprocess technology in this industry has now expanded further into the areas of biorefining and upgrading of fuels, production of fine chemicals, control of souring during production and air VOC biofiltration. In this paper we provide an overview of the major applications of bioprocesses and technology development in the petroleum industry both in upstream and downstream areas and highlight future challenges and opportunities.

  17. Petroleum marketing monthly, March 1995

    SciTech Connect

    1995-03-10

    This report for March 1995, provides information and statistical data on a variety of crude oils and refined petroleum products. The publication presents statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the f.o.b. and landed cost of imported crude oil, and the refiners` acquisition cost of crude oil. Refined petroleum product sales data include motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane. The Petroleum Marketing Division, Office of Oil and Gas, Energy Information Administration ensures the accuracy, quality, and confidentiality of the published data in the Petroleum Marketing Monthly. A glossary is included.

  18. Strategic Petroleum Reserve quarterly report

    SciTech Connect

    Not Available

    1993-08-15

    This Quarterly Report highlights activities undertaken during the second quarter of calendar year 1993, including: inventory of petroleum products stored in the Reserve, under contract and in transit at the end of the calendar quarter; fill rate for the current quarter and projected fill rate for the next calendar quarter; average price of the petroleum products acquired during the calendar quarter; current and projected storage capacity and plans to accelerate the acquisition or construction of such capacity; analysis of existing or anticipated problems with the acquisition and storage of petroleum products, and future expansion of storage capacity; funds obligated by the Secretary from the SPR Petroleum Account and the Strategic Petroleum Reserve Account during the prior calendar quarter and in total; and major environmental actions completed, in progress, or anticipated.

  19. Processing of Mars Exploration Rover Imagery for Science and Operations Planning

    NASA Technical Reports Server (NTRS)

    Alexander, Douglass A.; Deen, Robert G.; Andres, Paul M.; Zamani, Payam; Mortensen, Helen B.; Chen, Amy C.; Cayanan, Michael K.; Hall, Jeffrey R.; Klochko, Vadim S.; Pariser, Oleg; Stanley, Carol L.; Thompson, Charles K.; Yagi, Gary M.

    2006-01-01

    The twin Mars Exploration Rovers (MER) delivered an unprecedented array of image sensors to the Mars surface. These cameras were essential for operations, science, and public engagement. The Multimission Image Processing Laboratory (MIPL) at the Jet Propulsion Laboratory was responsible for the first-order processing of all of the images returned by these cameras. This processing included reconstruction of the original images, systematic and ad hoc generation of a wide variety of products derived from those images, and delivery of the data to a variety of customers, within tight time constraints. A combination of automated and manual processes was developed to meet these requirements, with significant inheritance from prior missions. This paper describes the image products generated by MIPL for MER and the processes used to produce and deliver them.

  20. Processing of Mars Exploration Rover Imagery for Science and Operations Planning

    NASA Technical Reports Server (NTRS)

    Alexander, Douglass A.; Deen, Robert G.; Andres, Paul M.; Zamani, Payam; Mortensen, Helen B.; Chen, Amy C.; Cayanan, Michael K.; Hall, Jeffrey R.; Klochko, Vadim S.; Pariser, Oleg; hide

    2006-01-01

    The twin Mars Exploration Rovers (MER) delivered an unprecedented array of image sensors to the Mars surface. These cameras were essential for operations, science, and public engagement. The Multimission Image Processing Laboratory (MIPL) at the Jet Propulsion Laboratory was responsible for the first-order processing of all of the images returned by these cameras. This processing included reconstruction of the original images, systematic and ad hoc generation of a wide variety of products derived from those images, and delivery of the data to a variety of customers, within tight time constraints. A combination of automated and manual processes was developed to meet these requirements, with significant inheritance from prior missions. This paper describes the image products generated by MIPL for MER and the processes used to produce and deliver them.