Science.gov

Sample records for petroleum solvents chromosomal

  1. 40 CFR Table 6 to Subpart Vvvv of... - Default Organic HAP Contents of Petroleum Solvent Groups

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... Petroleum Solvent Groups 6 Table 6 to Subpart VVVV of Part 63 Protection of Environment ENVIRONMENTAL... Contents of Petroleum Solvent Groups As specified in § 63.5758(a)(6), when detailed organic HAP content..., Naphthol Spirits, Petroleum Spirits, Petroleum Oil, Petroleum Naphtha, Solvent Naphtha, Solvent Blend.) 3...

  2. 40 CFR Table 4 to Subpart Rrrr of... - Default Organic HAP Mass Fraction for Petroleum Solvent Groups 1

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... Petroleum Solvent Groups 1 4 Table 4 to Subpart RRRR of Part 63 Protection of Environment ENVIRONMENTAL... Organic HAP Mass Fraction for Petroleum Solvent Groups 1 You May Use the Mass Fraction Values in the..., Petroleum Spirits, Petroleum Oil, Petroleum Naphtha, Solvent Naphtha, Solvent Blend. 3 E.g.,...

  3. New selective solvents of aromatic hydrocarbons based on petroleum sulfides

    SciTech Connect

    Nikitin, Yu.E.; Baikova, A.Ya.; Vakhitova, N.G.; Khorosheva, S.I.; Murinov, Yu.I.

    1985-01-01

    The present work examines the extractive properties of petroleum sulfoxides (PSO) and their mixtures with other industrial extraction agents. Substitutes are tested to find inexpensive, high-boiling selective solvents and as extractive rectification agents for aromatic hydrocarbons. Effective extraction agents were proposed for the recovery of benzene and toluene from hydrocarbon mixtures during extractive rectification. Petroleum sulfoxides and their synergistic mixtures with diethylene glycol and dimethylformamide, enabled benzene and toluene to be recovered to the extent of 91-99% with a purity of 92-98%; when recovery is from a mixture enriched with benzene, purity increases to 99.5%.

  4. 40 CFR Table 7 to Subpart Kkkk of... - Default Organic HAP Mass Fraction for Petroleum Solvent Groups a

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 13 2014-07-01 2014-07-01 false Default Organic HAP Mass Fraction for Petroleum Solvent Groups a 7 Table 7 to Subpart KKKK of Part 63 Protection of Environment ENVIRONMENTAL... Organic HAP Mass Fraction for Petroleum Solvent Groups a You may use the mass fraction values in...

  5. 40 CFR Table 7 to Subpart Kkkk of... - Default Organic HAP Mass Fraction for Petroleum Solvent Groups a

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 13 2013-07-01 2012-07-01 true Default Organic HAP Mass Fraction for Petroleum Solvent Groups a 7 Table 7 to Subpart KKKK of Part 63 Protection of Environment ENVIRONMENTAL... Organic HAP Mass Fraction for Petroleum Solvent Groups a You may use the mass fraction values in...

  6. 40 CFR Table 7 to Subpart Kkkk of... - Default Organic HAP Mass Fraction for Petroleum Solvent Groups a

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 13 2012-07-01 2012-07-01 false Default Organic HAP Mass Fraction for Petroleum Solvent Groups a 7 Table 7 to Subpart KKKK of Part 63 Protection of Environment ENVIRONMENTAL... Organic HAP Mass Fraction for Petroleum Solvent Groups a You may use the mass fraction values in...

  7. 40 CFR Table 6 to Subpart Vvvv of... - Default Organic HAP Contents of Petroleum Solvent Groups

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 12 2011-07-01 2009-07-01 true Default Organic HAP Contents of... Manufacturing Pt. 63, Subpt. VVVV, Table 6 Table 6 to Subpart VVVV of Part 63—Default Organic HAP Contents of Petroleum Solvent Groups As specified in § 63.5758(a)(6), when detailed organic HAP content data for...

  8. 40 CFR Table 6 to Subpart Vvvv of... - Default Organic HAP Contents of Petroleum Solvent Groups

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 12 2010-07-01 2010-07-01 true Default Organic HAP Contents of... Manufacturing Pt. 63, Subpt. VVVV, Table 6 Table 6 to Subpart VVVV of Part 63—Default Organic HAP Contents of Petroleum Solvent Groups As specified in § 63.5758(a)(6), when detailed organic HAP content data for...

  9. 40 CFR Table 6 to Subpart Vvvv of... - Default Organic HAP Contents of Petroleum Solvent Groups

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 13 2014-07-01 2014-07-01 false Default Organic HAP Contents of... Boat Manufacturing Pt. 63, Subpt. VVVV, Table 6 Table 6 to Subpart VVVV of Part 63—Default Organic HAP Contents of Petroleum Solvent Groups As specified in § 63.5758(a)(6), when detailed organic HAP...

  10. 40 CFR Table 6 to Subpart Vvvv of... - Default Organic HAP Contents of Petroleum Solvent Groups

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 13 2013-07-01 2012-07-01 true Default Organic HAP Contents of... Boat Manufacturing Pt. 63, Subpt. VVVV, Table 6 Table 6 to Subpart VVVV of Part 63—Default Organic HAP Contents of Petroleum Solvent Groups As specified in § 63.5758(a)(6), when detailed organic HAP...

  11. 40 CFR Table 4 to Subpart Pppp of... - Default Organic HAP Mass Fraction for Petroleum Solvent Groups a

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 12 2011-07-01 2009-07-01 true Default Organic HAP Mass Fraction for... Organic HAP Mass Fraction for Petroleum Solvent Groups a You may use the mass fraction values in the.... Solvent type Averageorganic HAP mass fraction Typical organic HAP, percent by mass Aliphatic b 0.03...

  12. 40 CFR Table 4 to Subpart Pppp of... - Default Organic HAP Mass Fraction for Petroleum Solvent Groups a

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 13 2012-07-01 2012-07-01 false Default Organic HAP Mass Fraction for... 63—Default Organic HAP Mass Fraction for Petroleum Solvent Groups a You may use the mass fraction... formulation data. Solvent type Averageorganic HAP mass fraction Typical organic HAP, percent by mass...

  13. 40 CFR Table 4 to Subpart Pppp of... - Default Organic HAP Mass Fraction for Petroleum Solvent Groups a

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 13 2013-07-01 2012-07-01 true Default Organic HAP Mass Fraction for... 63—Default Organic HAP Mass Fraction for Petroleum Solvent Groups a You may use the mass fraction... formulation data. Solvent type Averageorganic HAP mass fraction Typical organic HAP, percent by mass...

  14. 40 CFR Table 4 to Subpart Pppp of... - Default Organic HAP Mass Fraction for Petroleum Solvent Groups a

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 13 2014-07-01 2014-07-01 false Default Organic HAP Mass Fraction for... 63—Default Organic HAP Mass Fraction for Petroleum Solvent Groups a You may use the mass fraction... formulation data. Solvent type Averageorganic HAP mass fraction Typical organic HAP, percent by mass...

  15. 40 CFR Table 4 to Subpart IIIi of... - Default Organic HAP Mass Fraction for Petroleum Solvent Groups a

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 13 2013-07-01 2012-07-01 true Default Organic HAP Mass Fraction for... of Part 63—Default Organic HAP Mass Fraction for Petroleum Solvent Groups a You may use the mass... manufacturer's formulation data Solvent type Averageorganic HAP mass fraction Typical organic HAP, percent...

  16. 40 CFR Table 4 to Subpart Nnnn of... - Default Organic HAP Mass Fraction for Petroleum Solvent Groups a

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 13 2012-07-01 2012-07-01 false Default Organic HAP Mass Fraction for...—Default Organic HAP Mass Fraction for Petroleum Solvent Groups a You may use the mass fraction values in... formulation data. Solvent type Average organic HAP mass fraction Typical organic HAP, percent by...

  17. 40 CFR Table 4 to Subpart IIIi of... - Default Organic HAP Mass Fraction for Petroleum Solvent Groups a

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 12 2011-07-01 2009-07-01 true Default Organic HAP Mass Fraction for... Organic HAP Mass Fraction for Petroleum Solvent Groups a You may use the mass fraction values in the... Solvent type Averageorganic HAP mass fraction Typical organic HAP, percent by mass Aliphatic b 0.03...

  18. 40 CFR Table 4 to Subpart Mmmm of... - Default Organic HAP Mass Fraction for Petroleum Solvent Groups a

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 13 2014-07-01 2014-07-01 false Default Organic HAP Mass Fraction for... MMMM of Part 63—Default Organic HAP Mass Fraction for Petroleum Solvent Groups a You may use the mass... manufacturer's formulation data. Solvent type Average organic HAP mass fraction Typical organic HAP, percent...

  19. 40 CFR Table 5 to Subpart Oooo of... - Default Organic HAP Mass Fraction for Petroleum Solvent Groups a

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 12 2010-07-01 2010-07-01 true Default Organic HAP Mass Fraction for... 63—Default Organic HAP Mass Fraction for Petroleum Solvent Groups a You may use the mass fraction... formulation data: Solvent type Averageorganic HAP mass fraction Typical organic HAP, percent by mass...

  20. 40 CFR Table 5 to Subpart Oooo of... - Default Organic HAP Mass Fraction for Petroleum Solvent Groups a

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 13 2014-07-01 2014-07-01 false Default Organic HAP Mass Fraction for... OOOO of Part 63—Default Organic HAP Mass Fraction for Petroleum Solvent Groups a You may use the mass... manufacturer's formulation data: Solvent type Averageorganic HAP mass fraction Typical organic HAP, percent...

  1. 40 CFR Table 4 to Subpart Mmmm of... - Default Organic HAP Mass Fraction for Petroleum Solvent Groups a

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 12 2011-07-01 2009-07-01 true Default Organic HAP Mass Fraction for... Part 63—Default Organic HAP Mass Fraction for Petroleum Solvent Groups a You may use the mass fraction... formulation data. Solvent type Average organic HAP mass fraction Typical organic HAP, percent by...

  2. 40 CFR Table 6 to Subpart Qqqq of... - Default Organic HAP Mass Fraction for Petroleum Solvent Groups a

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 13 2012-07-01 2012-07-01 false Default Organic HAP Mass Fraction for...—Default Organic HAP Mass Fraction for Petroleum Solvent Groups a You may use the mass fraction values in... formulation data. Solvent type Average organic HAP mass fraction Typical organic HAP, percent by...

  3. 40 CFR Table 4 to Subpart Nnnn of... - Default Organic HAP Mass Fraction for Petroleum Solvent Groups a

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 13 2014-07-01 2014-07-01 false Default Organic HAP Mass Fraction for...—Default Organic HAP Mass Fraction for Petroleum Solvent Groups a You may use the mass fraction values in... formulation data. Solvent type Average organic HAP mass fraction Typical organic HAP, percent by...

  4. 40 CFR Table 6 to Subpart Qqqq of... - Default Organic HAP Mass Fraction for Petroleum Solvent Groups a

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 13 2013-07-01 2012-07-01 true Default Organic HAP Mass Fraction for...—Default Organic HAP Mass Fraction for Petroleum Solvent Groups a You may use the mass fraction values in... formulation data. Solvent type Average organic HAP mass fraction Typical organic HAP, percent by...

  5. 40 CFR Table 5 to Subpart Oooo of... - Default Organic HAP Mass Fraction for Petroleum Solvent Groups a

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 13 2013-07-01 2012-07-01 true Default Organic HAP Mass Fraction for... OOOO of Part 63—Default Organic HAP Mass Fraction for Petroleum Solvent Groups a You may use the mass... manufacturer's formulation data: Solvent type Averageorganic HAP mass fraction Typical organic HAP, percent...

  6. 40 CFR Table 4 to Subpart IIIi of... - Default Organic HAP Mass Fraction for Petroleum Solvent Groups a

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 13 2012-07-01 2012-07-01 false Default Organic HAP Mass Fraction for... of Part 63—Default Organic HAP Mass Fraction for Petroleum Solvent Groups a You may use the mass... manufacturer's formulation data Solvent type Averageorganic HAP mass fraction Typical organic HAP, percent...

  7. 40 CFR Table 6 to Subpart Qqqq of... - Default Organic HAP Mass Fraction for Petroleum Solvent Groups a

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 13 2014-07-01 2014-07-01 false Default Organic HAP Mass Fraction for...—Default Organic HAP Mass Fraction for Petroleum Solvent Groups a You may use the mass fraction values in... formulation data. Solvent type Average organic HAP mass fraction Typical organic HAP, percent by...

  8. 40 CFR Table 4 to Subpart Mmmm of... - Default Organic HAP Mass Fraction for Petroleum Solvent Groups a

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 12 2010-07-01 2010-07-01 true Default Organic HAP Mass Fraction for... Part 63—Default Organic HAP Mass Fraction for Petroleum Solvent Groups a You may use the mass fraction... formulation data. Solvent type Average organic HAP mass fraction Typical organic HAP, percent by...

  9. 40 CFR Table 4 to Subpart IIIi of... - Default Organic HAP Mass Fraction for Petroleum Solvent Groups a

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 12 2010-07-01 2010-07-01 true Default Organic HAP Mass Fraction for... Organic HAP Mass Fraction for Petroleum Solvent Groups a You may use the mass fraction values in the... Solvent type Averageorganic HAP mass fraction Typical organic HAP, percent by mass Aliphatic b 0.03...

  10. 40 CFR Table 4 to Subpart Nnnn of... - Default Organic HAP Mass Fraction for Petroleum Solvent Groups a

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 13 2013-07-01 2012-07-01 true Default Organic HAP Mass Fraction for...—Default Organic HAP Mass Fraction for Petroleum Solvent Groups a You may use the mass fraction values in... formulation data. Solvent type Average organic HAP mass fraction Typical organic HAP, percent by...

  11. 40 CFR Table 4 to Subpart Rrrr of... - Default Organic HAP Mass Fraction for Petroleum Solvent Groups 1

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 13 2014-07-01 2014-07-01 false Default Organic HAP Mass Fraction for... Organic HAP Mass Fraction for Petroleum Solvent Groups 1 You May Use the Mass Fraction Values in the...: Solvent type Average organic HAP mass fraction Typical organic percent HAP, by mass Aliphatic 2 0.03...

  12. 40 CFR Table 5 to Subpart Oooo of... - Default Organic HAP Mass Fraction for Petroleum Solvent Groups a

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 12 2011-07-01 2009-07-01 true Default Organic HAP Mass Fraction for... 63—Default Organic HAP Mass Fraction for Petroleum Solvent Groups a You may use the mass fraction... formulation data: Solvent type Averageorganic HAP mass fraction Typical organic HAP, percent by mass...

  13. 40 CFR Table 5 to Subpart Oooo of... - Default Organic HAP Mass Fraction for Petroleum Solvent Groups a

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 13 2012-07-01 2012-07-01 false Default Organic HAP Mass Fraction for... OOOO of Part 63—Default Organic HAP Mass Fraction for Petroleum Solvent Groups a You may use the mass... manufacturer's formulation data: Solvent type Averageorganic HAP mass fraction Typical organic HAP, percent...

  14. 40 CFR Table 4 to Subpart IIIi of... - Default Organic HAP Mass Fraction for Petroleum Solvent Groups a

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 13 2014-07-01 2014-07-01 false Default Organic HAP Mass Fraction for... of Part 63—Default Organic HAP Mass Fraction for Petroleum Solvent Groups a You may use the mass... manufacturer's formulation data Solvent type Averageorganic HAP mass fraction Typical organic HAP, percent...

  15. 40 CFR Table 4 to Subpart Mmmm of... - Default Organic HAP Mass Fraction for Petroleum Solvent Groups a

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 13 2013-07-01 2012-07-01 true Default Organic HAP Mass Fraction for... MMMM of Part 63—Default Organic HAP Mass Fraction for Petroleum Solvent Groups a You may use the mass... manufacturer's formulation data. Solvent type Average organic HAP mass fraction Typical organic HAP, percent...

  16. 40 CFR Table 4 to Subpart Mmmm of... - Default Organic HAP Mass Fraction for Petroleum Solvent Groups a

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 13 2012-07-01 2012-07-01 false Default Organic HAP Mass Fraction for... MMMM of Part 63—Default Organic HAP Mass Fraction for Petroleum Solvent Groups a You may use the mass... manufacturer's formulation data. Solvent type Average organic HAP mass fraction Typical organic HAP, percent...

  17. 40 CFR Table 4 to Subpart Pppp of... - Default Organic HAP Mass Fraction for Petroleum Solvent Groups a

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 12 2010-07-01 2010-07-01 true Default Organic HAP Mass Fraction for... Organic HAP Mass Fraction for Petroleum Solvent Groups a You may use the mass fraction values in the.... Solvent type Averageorganic HAP mass fraction Typical organic HAP, percent by mass Aliphatic b 0.03...

  18. 40 CFR Table 4 to Subpart Rrrr of... - Default Organic HAP Mass Fraction for Petroleum Solvent Groups 1

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 13 2013-07-01 2012-07-01 true Default Organic HAP Mass Fraction for... Organic HAP Mass Fraction for Petroleum Solvent Groups 1 You May Use the Mass Fraction Values in the...: Solvent type Average organic HAP mass fraction Typical organic percent HAP, by mass Aliphatic 2 0.03...

  19. Analysis of solvent dyes in refined petroleum products by electrospray ionization mass spectrometry

    USGS Publications Warehouse

    Rostad, C.E.

    2010-01-01

    Solvent dyes are used to color refined petroleum products to enable differentiation between gasoline, diesel, and jet fuels. Analysis for these dyes in the hydrocarbon product is difficult due to their very low concentrations in such a complex matrix. Flow injection analysis/electrospray ionization/mass spectrometry in both negative and positive mode was used to optimize ionization of ten typical solvent dyes. Samples of hydrocarbon product were analyzed under similar conditions. Positive electrospray ionization produced very complex spectra, which were not suitably specific for targeting only the dyes. Negative electrospray ionization produced simple spectra because aliphatic and aromatic moieties were not ionized. This enabled screening for a target dye in samples of hydrocarbon product from a spill.

  20. In situ thermally enhanced biodegradation of petroleum fuel hydrocarbons and halogenated organic solvents

    DOEpatents

    Taylor, R.T.; Jackson, K.J.; Duba, A.G.; Chen, C.I.

    1998-05-19

    An in situ thermally enhanced microbial remediation strategy and a method for the biodegradation of toxic petroleum fuel hydrocarbon and halogenated organic solvent contaminants are described. The method utilizes nonpathogenic, thermophilic bacteria for the thermal biodegradation of toxic and carcinogenic contaminants, such as benzene, toluene, ethylbenzene and xylenes, from fuel leaks and the chlorinated ethenes, such as trichloroethylene, chlorinated ethanes, such as 1,1,1-trichloroethane, and chlorinated methanes, such as chloroform, from past solvent cleaning practices. The method relies on and takes advantage of the pre-existing heated conditions and the array of delivery/recovery wells that are created and in place following primary subsurface contaminant volatilization efforts via thermal approaches, such as dynamic underground steam-electrical heating. 21 figs.

  1. In situ thermally enhanced biodegradation of petroleum fuel hydrocarbons and halogenated organic solvents

    DOEpatents

    Taylor, Robert T.; Jackson, Kenneth J.; Duba, Alfred G.; Chen, Ching-I

    1998-01-01

    An in situ thermally enhanced microbial remediation strategy and a method for the biodegradation of toxic petroleum fuel hydrocarbon and halogenated organic solvent contaminants. The method utilizes nonpathogenic, thermophilic bacteria for the thermal biodegradation of toxic and carcinogenic contaminants, such as benzene, toluene, ethylbenzene and xylenes, from fuel leaks and the chlorinated ethenes, such as trichloroethylene, chlorinated ethanes, such as 1,1,1-trichloroethane, and chlorinated methanes, such as chloroform, from past solvent cleaning practices. The method relies on and takes advantage of the pre-existing heated conditions and the array of delivery/recovery wells that are created and in place following primary subsurface contaminant volatilization efforts via thermal approaches, such as dynamic underground steam-electrical heating.

  2. Carcinogenicity of petroleum lubricating oil distillates: effects of solvent refining, hydroprocessing, and blending.

    PubMed

    Halder, C A; Warne, T M; Little, R Q; Garvin, P J

    1984-01-01

    Certain refining processes were investigated to determine their influence on the dermal carcinogenic activity of petroleum-derived lubricating oil distillates. Specifically, the effects of solvent refining, hydroprocessing, a combination of both processes, and the blending of oils processed using each technique were evaluated in standard mouse skin-painting bioassays. The refining process used as well as the level or severity of treatment greatly influenced the carcinogenic outcome of processed lubricating oils. Solvent refining at severities normally used appeared to eliminate carcinogenicity. In contrast, hydroprocessing alone at mild levels of treatment was successful only in reducing the carcinogenic potency; severe hydroprocessing conditions were necessary to eliminate carcinogenic activity without the use of additional refining processes. Carcinogenic activity could also be eliminated by following moderate solvent refining with mild hydroprocessing. Blending of hydroprocessed oils with solvent-refined oils resulted in a substantial reduction or even elimination of carcinogenic activity. However, the degree of protection obtained varied with the particular distillates used and appeared largely dependent on the inherent biological activity of the hydroprocessed oil.

  3. 40 CFR Table 7 to Subpart Kkkk of... - Default Organic HAP Mass Fraction for Petroleum Solvent Groups a

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 12 2010-07-01 2010-07-01 true Default Organic HAP Mass Fraction for Petroleum Solvent Groups a 7 Table 7 to Subpart KKKK of Part 63 Protection of Environment ENVIRONMENTAL... Metal Cans Pt. 63, Subpt. KKKK, Table 7 Table 7 to Subpart KKKK of Part 63—Default Organic HAP...

  4. 40 CFR Table 7 to Subpart Kkkk of... - Default Organic HAP Mass Fraction for Petroleum Solvent Groups a

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 12 2011-07-01 2009-07-01 true Default Organic HAP Mass Fraction for Petroleum Solvent Groups a 7 Table 7 to Subpart KKKK of Part 63 Protection of Environment ENVIRONMENTAL... Metal Cans Pt. 63, Subpt. KKKK, Table 7 Table 7 to Subpart KKKK of Part 63—Default Organic HAP...

  5. Petroleum.

    ERIC Educational Resources Information Center

    McManus, T. R.; And Others

    1989-01-01

    This review of petroleum covers: crude oil; fuels, gaseous and liquid; lubricants, oils, and greases; asphalts, bitumens, tars, and pitches; hydrocarbons; physical properties; metals in oil; nonmetallic elements and heterocompounds; and analytical methods and apparatus. (MVL)

  6. A combination of solvent extraction and freeze thaw for oil recovery from petroleum refinery wastewater treatment pond sludge.

    PubMed

    Hu, Guangji; Li, Jianbing; Hou, Haobo

    2015-01-01

    A combination of solvent extraction and freeze thaw was examined for recovering oil from the high-moisture petroleum refinery wastewater treatment pond sludge. Five solvents including cyclohexane (CHX), dichloromethane (DCM), methyl ethyl ketone (MEK), ethyl acetate (EA), and 2-propanol (2-Pro) were examined. It was found that these solvents except 2-Pro showed a promising oil recovery rate of about 40%, but the recycling of DCM solvent after oil extraction was quite low. Three solvents (CHX, MEK and EA) were then selected for examining the effect of freeze/thaw treatment on improving the quality of recovered oil. This treatment increased the total petroleum hydrocarbon (TPH) content in recovered oil from about 40% to 60% for both MEK and EA extractions, but little effect was observed for CHX extraction. Although the solid residue after oil recovery had a significantly decreased TPH content, a high concentration of heavy metals was observed, indicating that this residue may require proper management. In general, the combination of solvent extraction with freeze/thaw is effective for high-moisture oily hazardous waste treatment.

  7. Petroleum solvent mortality study of Oklahoma dry cleaners. Volume 2. Final report, 1 January 1986-31 March 1988

    SciTech Connect

    Asal, N.R.; Coleman, R.L.; Petrone, R.L.; Owen, W.; Walsworth, S.

    1988-06-30

    The association between exposures to the primary petroleum solvents used in commercial dry-cleaning processes and various causes of death was investigated. Each commercial dry-cleaning establishment in Oklahoma was classified according to the solvent or solvents in use from 1941 to 1983, based on data from the State Dry Cleaners Board. A cohort with known solvent exposures was identified. The proportionate mortality ratios and standardized mortality ratios were determined for all major causes of death. Nearly 59% were white males, with an average exposure of 10.5 years. No excess in overall cancer mortality was found. Significant excesses were noted for mental, psychoneurotic, and personality disorders due to alcoholism; genitourinary system due to acute nephritis, chronic nephritis, and renal sclerosis; bone and organ movement due to arthritis and spondylitis. An excess in cancers of the respiratory system was identified with excesses in mortality due to trachea, bronchus, and lung cancer among those dying at age 65 or older. A 45% excess in proportionate mortality due to pancreatic cancer was found. Only on analysis of petroleum-solvent exposure to white males was an excess found for kidney cancer. Moderately increased incidents of skin and bone cancer were found. Volume 1 is also available.

  8. Influence of soil and hydrocarbon properties on the solvent extraction of high-concentration weathered petroleum from contaminated soils.

    PubMed

    Sui, Hong; Hua, Zhengtao; Li, Xingang; Li, Hong; Wu, Guozhong

    2014-05-01

    Petroleum ether was used to extract petroleum hydrocarbons from soils collected from six oil fields with different history of exploratory and contamination. It was capable of fast removing 76-94 % of the total petroleum hydrocarbons including 25 alkanes (C11-C35) and 16 US EPA priority polycyclic aromatic hydrocarbons from soils at room temperature. The partial least squares analysis indicated that the solvent extraction efficiencies were positively correlated with soil organic matter, cation exchange capacity, moisture, pH, and sand content of soils, while negative effects were observed in the properties reflecting the molecular size (e.g., molecular weight and number of carbon atoms) and hydrophobicity (e.g., water solubility, octanol-water partition coefficient, soil organic carbon partition coefficient) of hydrocarbons. The high concentration of weathered crude oil at the order of 10(5) mg kg(-1) in this study was demonstrated adverse for solvent extraction by providing an obvious nonaqueous phase liquid phase for hydrocarbon sinking and increasing the sequestration of soluble hydrocarbons in the insoluble oil fractions during weathering. A full picture of the mass distribution and transport mechanism of petroleum contaminants in soils will ultimately require a variety of studies to gain insights into the dynamic interactions between environmental indicator hydrocarbons and their host oil matrix.

  9. Investigation of ethyl lactate as a green solvent for desorption of total petroleum hydrocarbons (TPH) from contaminated soil.

    PubMed

    Jalilian Ahmadkalaei, Seyedeh Pegah; Gan, Suyin; Ng, Hoon Kiat; Abdul Talib, Suhaimi

    2016-11-01

    Treatment of oil-contaminated soil is a major environmental concern worldwide. The aim of this study is to examine the applicability of a green solvent, ethyl lactate (EL), in desorption of diesel aliphatic fraction within total petroleum hydrocarbons (TPH) in contaminated soil and to determine the associated desorption kinetics. Batch desorption experiments were carried out on artificially contaminated soil at different EL solvent percentages (%). In analysing the diesel range of TPH, TPH was divided into three fractions and the effect of solvent extraction on each fraction was examined. The experimental results demonstrated that EL has a high and fast desorbing power. Pseudo-second order rate equation described the experimental desorption kinetics data well with correlation coefficient values, R (2), between 0.9219 and 0.9999. The effects of EL percentage, initial contamination level of soil and liquid to solid ratio (L/S (v/w)) on initial desorption rate have also been evaluated. The effective desorption performance of ethyl lactate shows its potential as a removal agent for remediation of TPH-contaminated soil worldwide.

  10. Analysis of petroleum-contaminated soils by diffuse reflectance spectroscopy and sequential ultrasonic solvent extraction-gas chromatography.

    PubMed

    Okparanma, Reuben N; Coulon, Frederic; Mouazen, Abdul M

    2014-01-01

    In this study, we demonstrate that partial least-squares regression analysis with full cross-validation of spectral reflectance data estimates the amount of polycyclic aromatic hydrocarbons in petroleum-contaminated tropical rainforest soils. We applied the approach to 137 field-moist intact soil samples collected from three oil spill sites in Ogoniland in the Niger Delta province (5.317°N, 6.467°E), Nigeria. We used sequential ultrasonic solvent extraction-gas chromatography as the reference chemical method. We took soil diffuse reflectance spectra with a mobile fibre-optic visible and near-infrared spectrophotometer (350-2500 nm). Independent validation of combined data from studied sites showed reasonable prediction precision (root-mean-square error of prediction = 1.16-1.95 mg kg(-1), ratio of prediction deviation = 1.86-3.12, and validation r(2) = 0.77-0.89). This suggests that the methodology may be useful for rapid assessment of the spatial variability of polycyclic aromatic hydrocarbons in petroleum-contaminated soils in the Niger Delta to inform risk assessment and remediation.

  11. Monitoring the effect of poplar trees on petroleum-hydrocarbon and chlorinated-solvent contaminated ground water

    USGS Publications Warehouse

    Landmeyer, J.E.

    2001-01-01

    At contaminated groundwater sites, poplar trees can be used to affect groundwater levels, flow directions, and ultimately total groundwater and contaminant flux to areas downgradient of the trees. The magnitude of the hydrologic changes can be monitored using fundamental concepts of groundwater hydrology, in addition to plant physiology-based approaches, and can be viewed as being almost independent of the contaminant released. The affect of poplar trees on the fate of groundwater contaminants, however, is contaminant dependent. Some petroleum hydrocarbons or chlorinated solvents may be mineralized or transformed to innocuous compounds by rhizospheric bacteria associated with the tree roots, mineralized or transformed by plant tissues in the transpiration stream or leaves after uptake, or passively volatilized and rapidly dispersed or oxidized in the atmosphere. These processes also can be monitored using a combination of physiological- or geochemical-based field or laboratory approaches. When combined, such hydrologic and contaminant monitoring approaches can result in a more accurate assessment of the use of poplar trees to meet regulatory goals at contaminated groundwater sites, verify that these goals continue to be met in the future, and ultimately lead to a consensus on how the performance of plant-based remedial strategies (phytoremediation) is to be assessed.

  12. Monitoring the effect of poplar trees on petroleum-hydrocarbon and chlorinated-solvent contaminated ground water

    USGS Publications Warehouse

    Landmeyer, James E.

    2001-01-01

    At contaminated groundwater sites, poplar trees can be used to affect ground-water levels, flow directions, and ultimately total groundwater and contaminant flux to areas downgradient of the trees. The magnitude of the hydrologic changes can be monitored using fundamental concepts of groundwater hydrology, in addition to plant physiology-based approaches, and can be viewed as being almost independent of the contaminant released. The affect of poplar trees on the fate of groundwater contaminants, however, is contaminant dependent. Some petroleum hydrocarbons or chlorinated solvents may be mineralized or transformed to innocuous compounds by rhizospheric bacteria associated with the tree roots, mineralized or transformed by plant tissues in the transpiration stream or leaves after uptake, or passively volatilized and rapidly dispersed or oxidized in the atmosphere. These processes also can be monitored using a combination of physiological- or geochemical-based field or laboratory approaches. When combined, such hydrologic and contaminant monitoring approaches can result in a more accurate assessment of the use of poplar trees to meet regulatory goals at contaminated groundwater sites, verify that these goals continue to be met in the future, and ultimately lead to a consensus on how the performance of plant-based remedial strategies (phytoremediation) is to be assessed.

  13. Chromosome

    MedlinePlus

    Chromosomes are structures found in the center (nucleus) of cells that carry long pieces of DNA. DNA ... is the building block of the human body. Chromosomes also contain proteins that help DNA exist in ...

  14. Protective effects of solvent fractions of Mentha spicata (L.) leaves evaluated on 4-nitroquinoline-1-oxide induced chromosome damage and apoptosis in mouse bone marrow cells.

    PubMed

    Arumugam, Ponnan; Ramesh, Arabandi

    2009-10-01

    Spearmint leaves (Mentha spicata L.) contain high levels of antioxidants that are known to protect against both exogenous and endogenous DNA damage. In this study, the protective effects of the hexane fraction (HF), chloroform fraction (CF) and ethyl acetate fraction (EAF) in an ethanol extract from M. spicata were evaluated against 4-nitroquinoline-1-oxide (4-NQO) induced chromosome damage and apoptosis in bone marrow cells of Swiss albino mice. Two (EAF; 80 and 160 mg/ kg body weight - bw) or three (HF and CF; 80, 160 and 320 mg/ kg bw) doses of solvent fractions or vehicle control (25% DMSO in water) were administered orally for five consecutive days. Upon the sixth day, 4-NQO was injected intraperitoneally. The animals were killed the following day. Other control groups were comprised of animals treated with either the vehicle control or the various doses of solvent fractions, but with no 4-NQO treatment. 4-NQO induced micro-nucleated polychromatic erythrocytes (MnPCEs) in all the test groups. However, pre-treatment of animals with the solvent fractions significantly reduced the 4-NQO-induced MnPCEs as well as the percentage of apoptotic cells. The reduction of both MnPCE and apoptosis was more evident following the pre-treatment of animals with 160 mg/kg bw EAF.

  15. Carbonization of petroleum feedstocks

    SciTech Connect

    Eser, S.

    1987-01-01

    The properties of the petroleum cokes are determined by their crystalline structure, which principally depends on the nature of the mesophase formed during the liquid-phase carbonization of the precursors. This study was aimed at investigating the relationships between the chemical nature of the petroleum feedstocks and the mesophase development during carbonization. Ashland 240 pitch and a range of petroleum heavy residua were characterized by solvent fractionation, elemental analysis, Fourier Transform Infrared Spectroscopy, H and TC Nuclear Magnetic Resonance Spectroscopy. The semi-coke (pyridine insolubles) formation from the feedstocks and their asphaltene fractions was found to be first-order with respect to the concentration of pyridine solubles over a wide conversion range. An inverse relationship was observed between the rate of carbonization of the asphaltenes and the degree of mesophase development. The degree of mesophase development during the carbonization of the feedstock asphaltenes increased consistently with the increasing hydrogen aromaticity over the whole range of the feedstocks used. The principal conclusion from this study is that the mesophase development during carbonization critically depends on the chemical constitution of the petroleum feedstocks. The molecular nature of the asphaltene fractions determines the extent of mesophase development during the carbonization of the petroleum heavy residua. In this respect, the hydrogen aromaticity of the asphaltenes appears to be a good measure for the feedstock quality in terms of resulting coke structure and properties.

  16. Process development for the separation and recovery of Mo and Co from chloride leach liquors of petroleum refining catalyst by solvent extraction.

    PubMed

    Banda, Raju; Sohn, Seong Ho; Lee, Man Seung

    2012-04-30

    The separation and recovery of Mo and Co from the synthetic chloride leach liquors of petroleum refining catalyst has been investigated by employing TOPO and Alamine 308 as extractants. The synthetic leach liquor contained Mo 394 mg/L, Al 1782 mg/L, Co 119 mg/L in 3 M HCl. The separation of Mo from Co and Al was achieved with 0.05 M TOPO in Escaid 110 and complete stripping of Mo was attained with combination of 0.1M NH(4)OH and 0.05 M (NH(4))(2)CO(3). After separation of molybdenum, cobalt can be selectively extracted by Alamine 308 from Mo free raffinate after adjusting the concentration of chloride ion to 5 M by adding AlCl(3). The back-extraction of cobalt was obtained easily from loaded Alamine 308 with acidified water (pH=1.0). McCabe-Thiele diagrams were constructed from the extraction and stripping experiments of each element (Mo and Co). From the batch simulation of the counter-current extraction and stripping experiments, it was confirmed that Mo and Co recovery of 99.4% and 99.1% respectively was obtained from the synthetic leach liquor of the chloride solutions. Finally a hydrometallurgical process flow sheet was developed.

  17. Process for producing a petroleum wax composition

    SciTech Connect

    Jones, R.L.

    1991-04-23

    This patent describes a process for producing a wax composition. It comprises: vacuum distilling a petroleum feed to prepare a 650 distillate heavy intermediate petroleum wax, having a melting point range of from about 155{degrees}F. to about 185{degrees}F., subjecting the heavy intermediate petroleum wax to furfural/duosol solvent extraction, dissolving and crystallizing the heavy intermediate petroleum wax from a methyl ethyl ketone/toluene mixed solvent, dissolving and recrystallizing the heavy intermediate petroleum wax from a methyl ethyl ketone/toluene mixed solvent, percolating the recrystallized heavy intermediate petroleum wax in the molten state through a clay bed; and blending the recrystallized heavy intermediate petroleum wax from about 50 weight percent to about 90 weight percent with from about 10 weight percent to about 30 weight percent of a polymeric compound selected from the group consisting of ethylene-vinyl acetate copolymer, ethylene-ethyl acrylate copolymer, polypropylene and mixtures there of and having a molecular weight of from about 2,000 to about 100,000 and a melt index of from about 1 to about 250{degrees} at 375{degrees}F.

  18. Process for removing halogenated aliphatic and aromatic compounds from petroleum products

    DOEpatents

    Googin, J.M.; Napier, J.M.; Travaglini, M.A.

    1983-09-20

    A process is described for removing halogenated aliphatic and aromatic compounds, e.g., polychlorinated biphenyls, from petroleum products by solvent extraction. The halogenated aliphatic and aromatic compounds are extracted from a petroleum product into a polar solvent by contacting the petroleum product with the polar solvent. The polar solvent is characterized by a high solubility for the extracted halogenated aliphatic and aromatic compounds, a low solubility for the petroleum product and considerable solvent power for polyhydroxy compound. The preferred polar solvent is dimethylformamide. A miscible compound, such as, water or a polyhydroxy compound, is added to the polar extraction solvent to increase the polarity of the polar extraction solvent. The halogenated aliphatic and aromatic compounds are extracted from the highly-polarized mixture of water or polyhydroxy compound and polar extraction solvent into a low polar or nonpolar solvent by contacting the water or polyhydroxy compound-polar solvent mixture with the low polar or nonpolar solvent. The halogenated aliphatic and aromatic compounds and the low polar or nonpolar solvent are separated by physical means, e.g., vacuum evaporation. The polar and nonpolar solvents are recovered from recycling. The process can easily be designed for continuous operation. Advantages of the process include that the polar solvent and a major portion of the nonpolar solvent can be recycled, the petroleum products are reclaimable and the cost for disposing of waste containing polychlorinated biphenyls is significantly reduced. 1 fig.

  19. Process for removing halogenated aliphatic and aromatic compounds from petroleum products

    DOEpatents

    Googin, John M.; Napier, John M.; Travaglini, Michael A.

    1983-01-01

    A process for removing halogenated aliphatic and aromatic compounds, e.g., polychlorinated biphenyls, from petroleum products by solvent extraction. The halogenated aliphatic and aromatic compounds are extracted from a petroleum product into a polar solvent by contacting the petroleum product with the polar solvent. The polar solvent is characterized by a high solubility for the extracted halogenated aliphatic and aromatic compounds, a low solubility for the petroleum product and considerable solvent power for polyhydroxy compound. The preferred polar solvent is dimethylformamide. A miscible compound, such as, water or a polyhydroxy compound, is added to the polar extraction solvent to increase the polarity of the polar extraction solvent. The halogenated aliphatic and aromatic compounds are extracted from the highly-polarized mixture of water or polyhydroxy compound and polar extraction solvent into a low polar or nonpolar solvent by contacting the water or polyhydroxy compound-polar solvent mixture with the low polar or nonpolar solvent. The halogenated aliphatic and aromatic compounds and the low polar or nonpolar solvent are separated by physical means, e.g., vacuum evaporation. The polar and nonpolar solvents are recovered from recycling. The process can easily be designed for continuous operation. Advantages of the process include that the polar solvent and a major portion of the nonpolar solvent can be recycled, the petroleum products are reclaimable and the cost for disposing of waste containing polychlorinated biphenyls is significantly reduced.

  20. Prebiotic Petroleum

    NASA Astrophysics Data System (ADS)

    Ali, Mekki-Berrada

    2014-12-01

    This short communication summarizes a global and continuous reflection on the origins of life. "Prebiotic Petroleum" assumes that " the class of most complex molecules of life that may have geochemical and abiotic origin is the class of fatty acids with long aliphatic chains" and proposes a physical process for the formation of liposomes. Developments following the workshop start from the idea that the liposomes also acquire ion exchange channels physically during their forming process.

  1. Prebiotic petroleum.

    PubMed

    Ali, Mekki-Berrada

    2014-12-01

    This short communication summarizes a global and continuous reflection on the origins of life. "Prebiotic Petroleum" assumes that "the class of most complex molecules of life that may have geochemical and abiotic origin is the class of fatty acids with long aliphatic chains" and proposes a physical process for the formation of liposomes. Developments following the workshop start from the idea that the liposomes also acquire ion exchange channels physically during their forming process.

  2. 31 CFR 576.308 - Iraqi petroleum and petroleum products.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 31 Money and Finance:Treasury 3 2011-07-01 2011-07-01 false Iraqi petroleum and petroleum products... SANCTIONS REGULATIONS General Definitions § 576.308 Iraqi petroleum and petroleum products. The term Iraqi petroleum and petroleum products means any petroleum, petroleum products, or natural gas originating in...

  3. 31 CFR 576.308 - Iraqi petroleum and petroleum products.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 31 Money and Finance:Treasury 3 2012-07-01 2012-07-01 false Iraqi petroleum and petroleum products... SANCTIONS REGULATIONS General Definitions § 576.308 Iraqi petroleum and petroleum products. The term Iraqi petroleum and petroleum products means any petroleum, petroleum products, or natural gas originating in...

  4. 31 CFR 576.308 - Iraqi petroleum and petroleum products.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 31 Money and Finance:Treasury 3 2014-07-01 2014-07-01 false Iraqi petroleum and petroleum products... SANCTIONS REGULATIONS General Definitions § 576.308 Iraqi petroleum and petroleum products. The term Iraqi petroleum and petroleum products means any petroleum, petroleum products, or natural gas originating in...

  5. 31 CFR 576.308 - Iraqi petroleum and petroleum products.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 31 Money and Finance:Treasury 3 2013-07-01 2013-07-01 false Iraqi petroleum and petroleum products... SANCTIONS REGULATIONS General Definitions § 576.308 Iraqi petroleum and petroleum products. The term Iraqi petroleum and petroleum products means any petroleum, petroleum products, or natural gas originating in...

  6. 27 CFR 21.125 - Rubber hydrocarbon solvent.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2011-04-01 2011-04-01 false Rubber hydrocarbon solvent. 21.125 Section 21.125 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU....125 Rubber hydrocarbon solvent. (a) Rubber hydrocarbon solvent is a petroleum derivative....

  7. 27 CFR 21.125 - Rubber hydrocarbon solvent.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2013-04-01 2013-04-01 false Rubber hydrocarbon solvent. 21.125 Section 21.125 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU....125 Rubber hydrocarbon solvent. (a) Rubber hydrocarbon solvent is a petroleum derivative....

  8. 27 CFR 21.125 - Rubber hydrocarbon solvent.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2014-04-01 2014-04-01 false Rubber hydrocarbon solvent. 21.125 Section 21.125 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU....125 Rubber hydrocarbon solvent. (a) Rubber hydrocarbon solvent is a petroleum derivative....

  9. 27 CFR 21.125 - Rubber hydrocarbon solvent.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2012-04-01 2012-04-01 false Rubber hydrocarbon solvent. 21.125 Section 21.125 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU....125 Rubber hydrocarbon solvent. (a) Rubber hydrocarbon solvent is a petroleum derivative....

  10. 27 CFR 21.125 - Rubber hydrocarbon solvent.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Rubber hydrocarbon solvent. 21.125 Section 21.125 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU....125 Rubber hydrocarbon solvent. (a) Rubber hydrocarbon solvent is a petroleum derivative....

  11. Process for removing halogenated aliphatic and aromatic compounds from petroleum products. [Polychlorinated biphenyls; methylene chloride; perchloroethylene; trichlorofluoroethane; trichloroethylene; chlorobenzene

    DOEpatents

    Googin, J.M.; Napier, J.M.; Travaglini, M.A.

    1982-03-31

    A process for removing halogenated aliphatic and aromatic compounds, e.g., polychlorinated biphenyls, from petroleum products by solvent extraction. The halogenated aliphatic and aromatic compounds are extracted from a petroleum product into a polar solvent by contracting the petroleum product with the polar solvent. The polar solvent is characterized by a high solubility for the extracted halogenated aliphatic and aromatic compounds, a low solubility for the petroleum product and considerable solvent power for polyhydroxy compound. The preferred polar solvent is dimethylformamide. A miscible polyhydroxy compound, such as, water, is added to the polar extraction solvent to increase the polarity of the polar extraction solvent. The halogenated aliphatic and aromatic compounds are extracted from the highly-polarized mixture of polyhydroxy compound and polar extraction solvent into a low polar or nonpolar solvent by contacting the polyhydroxy compound-polar solvent mixture with the low polar or nonpolar solvent. The halogenated aliphatic and aromatic compounds in the low polar or nonpolar solvent by physical means, e.g., vacuum evaporation. The polar and nonpolar solvents are recovered for recycling. The process can easily be designed for continuous operation. Advantages of the process include that the polar solvent and a major portion of the nonpolar solvent can be recycled, the petroleum products are reclaimable and the cost for disposing of waste containing polychlorinated biphenyls is significantly reduced. 2 tables.

  12. Chromosomal Conditions

    MedlinePlus

    ... 150 babies is born with a chromosomal condition. Down syndrome is an example of a chromosomal condition. Because ... all pregnant women be offered prenatal tests for Down syndrome and other chromosomal conditions. A screening test is ...

  13. Petroleum Sector (NAICS 324)

    EPA Pesticide Factsheets

    Find relevant environmental regulations for the petroleum industry (NAICS 324), including National Emission Standards for Hazardous Air Pollutants (NESHAP)s for petroleum refineries and gasoline dispensing & effluent guidelines for oil and gas extraction

  14. Petroleum Processing Wastes.

    ERIC Educational Resources Information Center

    Baker, D. A.

    1978-01-01

    Presents a literature review of the petroleum processing wastes, covering publications of 1977. This review covers studies such as the use of activated carbon in petroleum and petrochemical waste treatment. A list of 15 references is also presented. (HM)

  15. Marker chromosomes.

    PubMed

    Rao, Kiran Prabhaker; Belogolovkin, Victoria

    2013-04-01

    Marker chromosomes are a morphologically heterogeneous group of structurally abnormal chromosomes that pose a significant challenge in prenatal diagnosis. Phenotypes associated with marker chromosomes are highly variable and range from normal to severely abnormal. Clinical outcomes are very difficult to predict when marker chromosomes are detected prenatally. In this review, we outline the classification, etiology, cytogenetic characterization, and clinical consequences of marker chromosomes, as well as practical approaches to prenatal diagnosis and genetic counseling.

  16. Petroleum marketing monthly

    SciTech Connect

    1995-11-01

    The Petroleum Marketing Monthly (PMM) provides information and statistical data on a variety of crude oils and refined petroleum products. The publication presents statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the f.o.b. and landed cost of imported crude oil, and the refiners` acquisition cost of crude oil. Refined petroleum product sales data include motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane. The Petroleum Marketing Division, Office of Oil and Gas, Energy Information Administration ensures the accuracy, quality, and confidentiality of the published data.

  17. Petroleum Supply Monthly

    SciTech Connect

    1996-02-01

    The Petroleum Supply Monthly (PSM) is one of a family of four publications produced by the Petroleum Supply Division within the Energy Information Administration (EIA) reflecting different levels of data timeliness and completeness. The other publications are the Weekly Petroleum Status Report (WPSR), the Winter Fuels Report, and the Petroleum Supply Annual (PSA). Data presented in the PSM describe the supply and disposition of petroleum products in the United States and major U.S. geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics.

  18. Petroleum supply monthly

    SciTech Connect

    1995-10-01

    The Petroleum Supply Monthly (PSM) is one of a family of four publications produced by the Petroleum Supply Division within the Energy Information Administration (EIA) reflecting different levels of data timeliness and completeness. The other publications are the Weekly Petroleum Status Report (WPSR), the Winter Fuels Report, and the Petroleum Supply Annual (PSA). Data presented in the PSM describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blends, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States.

  19. Petroleum marketing annual 1994

    SciTech Connect

    1995-08-24

    The Petroleum Marketing Annual (PMA) provides information and statistical data on a variety of crude oils and refined petroleum products. The publication presents statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysis, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the fob and landed cost of imported crude oil, and the refiners` acquisition cost of crude oil. Refined petroleum product sales data include motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane. The Petroleum Marketing Division, Office of Oil and Gas, Energy Information Administration ensures the accuracy, quality, and confidentiality of the published data in the Petroleum Marketing Annual. For this production, all estimates have been recalculated since their earlier publication in the Petroleum Marketing Monthly (PMM). These calculations made use of additional data and corrections that were received after the PMM publication date.

  20. Solvent substitution

    SciTech Connect

    Not Available

    1990-01-01

    The DOE Environmental Restoration and Waste Management Office of Technology Development and the Air Force Engineering and Services Center convened the First Annual International Workshop on Solvent Substitution on December 4--7, 1990. The primary objectives of this joint effort were to share information and ideas among attendees in order to enhance the development and implementation of required new technologies for the elimination of pollutants associated with industrial use of hazardous and toxic solvents; and to aid in accelerating collaborative efforts and technology transfer between government and industry for solvent substitution. There were workshop sessions focusing on Alternative Technologies, Alternative Solvents, Recovery/Recycling, Low VOC Materials and Treatment for Environmentally Safe Disposal. The 35 invited papers presented covered a wide range of solvent substitution activities including: hardware and weapons production and maintenance, paint stripping, coating applications, printed circuit boards, metal cleaning, metal finishing, manufacturing, compliance monitoring and process control monitoring. This publication includes the majority of these presentations. In addition, in order to further facilitate information exchange and technology transfer, the US Air Force and DOE solicited additional papers under a general Call for Papers.'' These papers, which underwent review and final selection by a peer review committee, are also included in this combined Proceedings/Compendium. For those involved in handling, using or managing hazardous and toxic solvents, this document should prove to be a valuable resource, providing the most up-to-date information on current technologies and practices in solvent substitution. Individual papers are abstracted separated.

  1. What makes critical-solvent processes work

    SciTech Connect

    Brule, M.R.; Corbett, R.W.

    1984-06-01

    Critical-solvent processing (sometimes called supercritical-gas extraction) is an ongoing technology based on phase-equilibrium phenomena in the critical region. Many new practical applications of critical-solvent processing are being conceived and implemented in the food, drug and chemical industries. The advantages afforded by critical-solvent processing in performing difficult separations such as caffeine from coffee, nicotine from tobacco, chemotherapeutic drugs from plants, and chemical feedstocks from petroleum and synfuels residua have been realized just in the last decade or so.

  2. Petroleum: An Energy Profile 1999

    EIA Publications

    1999-01-01

    Explains in layman's terms the major components and operations of the U.S. petroleum industry that include: petroleum products, resources and reserves, drilling and exploration, refining, storage and transportation, imports, exports, and petroleum marketing.

  3. Petroleum 1996: Issues and Trends

    EIA Publications

    1997-01-01

    Examines historical trends and focuses on major petroleum issues and the events they represent. It analyzes different dimensions of the petroleum industry and related markets in terms of how they relate to the volatility in petroleum markets.

  4. Fundamentals of Petroleum.

    ERIC Educational Resources Information Center

    Bureau of Naval Personnel, Washington, DC.

    Basic information on petroleum is presented in this book prepared for naval logistics officers. Petroleum in national defense is discussed in connection with consumption statistics, productive capacity, world's resources, and steps in logistics. Chemical and geological analyses are made in efforts to familiarize methods of refining, measuring,…

  5. Geostatistics and petroleum geology

    SciTech Connect

    Hohn, M.E.

    1988-01-01

    The book reviewed is designed as a practical guide to geostatistics or kriging for the petroleum geologists. The author's aim in the book is to explain geostatistics as a working tool for petroleum geologists through extensive use of case-study material mostly drawn from his own research in gas potential evaluation in West Virginia. Theory and mathematics are pared down to immediate needs.

  6. Petroleum supply monthly, April 1994

    SciTech Connect

    Not Available

    1994-04-01

    Data presented in the Petroleum Supply Monthly (PSM) describe the supply and disposition of petroleum products in the United States and major US geographical regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the US. The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the US.

  7. World petroleum supplies

    NASA Astrophysics Data System (ADS)

    Bell, Peter M.

    A number of conclusions by political conservatives about the fate of world petroleum supplies have been emerging lately. Among the most recent of them arose from discussions, held at the 1983 spring meeting of the American Association for the Advancement of Science (AAAS), which focused on the environment and resource study entitled “The Global 2000 Report” (New Scientist, June 9, 1983). Fred Singer, representing the Heritage Foundation of Washington, D.C., criticized the report, which predicted shortages in the near future, saying that the current world-wide oil glut will continue beyond the year 2000. Alternatives to the use of petroleum are a part of the cause. Singer argued that conservation, nuclear energy, and other petroleum substitutes will continue to suppress the demand for petroleum. In addition, according to other evaluations, exploration for petroleum and natural gas has not really begun.

  8. Thermal stability of petroleum pitches

    SciTech Connect

    Sorensen, I.W.

    1982-01-01

    Petroleum pitches and similar materials are becoming increasingly important as raw materials for the production of various types of carbons and graphites. Most recently, significant interest in such materials as low cost precursors for carbon fiber has developed. Crucial to success in this regard is the behavior of pitches and related substances as they pass through a mesophase or liquid crystalline form during heat treatment to form carbonaceous material. There is limited understanding of this phenomenon as well as the effects of pitch modification on it. An effort was made to elucidate the mesophase formation mechanisms by comparison of thermally-formed mesophase with that formed more rapidly in solvent-separated narrower pitch fractions. Specifically, selected pitches are subjected to heat treatment and characterized in terms of their composition, microstructural development, and rheology. Independent study was made of the effects of shearing field on composition, mesophase development, and molecular weight distributions for CTP-240 pitch. Complementary work is described for the thermal decomposition of pitch fractions obtained by solvent extraction. Several important technical advances are described that will assist in further study of these materials.

  9. Co-processing of carbonaceous solids and petroleum oil

    DOEpatents

    Gupta, Avinash; Greene, Marvin I.

    1992-01-01

    In a process for producing distillates from coal by a first stage thermal liquefaction followed by a catalytic hydrogenation, liquefaction solvent is added at points spaced over the length of the thermal liquefaction heater. Coal may be co-processed with petroleum oil by adding pre-hydrogenated oil to the first stage or unhydrogenated oil to the second stage.

  10. Chromosomal Flexibility

    ERIC Educational Resources Information Center

    Journal of College Science Teaching, 2005

    2005-01-01

    Scientists have shown that a genetic element on one chromosome may direct gene activity on another. Howard Hughes Medical Institute (HHMI) researchers report that a multitasking master-control region appears to over-see both a set of its own genes and a related gene on a nearby chromosome. The findings reinforce the growing importance of location…

  11. Modeling Chromosomes

    ERIC Educational Resources Information Center

    Robertson, Carol

    2016-01-01

    Learning about chromosomes is standard fare in biology classrooms today. However, students may find it difficult to understand the relationships among the "genome", "chromosomes", "genes", a "gene locus", and "alleles". In the simple activity described in this article, which follows the 5E approach…

  12. [Petroleum substances--human health hazards. I. Classification of petroleum substances on the list of dangerous substances and assessment of existing hazards].

    PubMed

    Konieczko, Katarzyna

    2006-01-01

    Complex products derived from petroleum are widely used as fuels, greases, solvents, and intermediates in many branches of industry. Petroleum exposure-related human health hazards, observed in occupationally exposed people and in the general population, are a serious sanitary problem. Complex and variable composition of individual petroleum products makes the actual assessment of human health hazards difficult. Potential hazards, and resulting classification of individual petroleum substance groups, are discussed in the presented work. This should prove to be helpful to work safety and hygiene services as well as to supervising institutions, mainly the sanitary inspection, in a proper assessment of the hazards, and consequently in taking appropriate preventive actions. In Part I., general issues concerning the hazard assessment and legal aspects of petroleum substances classification are presented. In Part. II., individual groups of petroleum substances are discussed with respect to health hazards, resulting from both physicochemical properties and toxicity, and their classification based on this analysis is suggested.

  13. Determination of Total Petroleum Hydrocarbons (TPH) Using Total Carbon Analysis

    SciTech Connect

    Ekechukwu, A.A.

    2002-05-10

    Several methods have been proposed to replace the Freon(TM)-extraction method to determine total petroleum hydrocarbon (TPH) content. For reasons of cost, sensitivity, precision, or simplicity, none of the replacement methods are feasible for analysis of radioactive samples at our facility. We have developed a method to measure total petroleum hydrocarbon content in aqueous sample matrixes using total organic carbon (total carbon) determination. The total carbon content (TC1) of the sample is measured using a total organic carbon analyzer. The sample is then contacted with a small volume of non-pokar solvent to extract the total petroleum hydrocarbons. The total carbon content of the resultant aqueous phase of the extracted sample (TC2) is measured. Total petroleum hydrocarbon content is calculated (TPH = TC1-TC2). The resultant data are consistent with results obtained using Freon(TM) extraction followed by infrared absorbance.

  14. Petroleum supply monthly, February 1994

    SciTech Connect

    Not Available

    1994-03-01

    The Petroleum Supply Monthly presents data describing the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the US. The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders; operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. Data are divided into two sections: Summary statistics and Detailed statistics.

  15. Petroleum supply monthly, January 1994

    SciTech Connect

    Not Available

    1994-01-01

    Data presented describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States. The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States.

  16. Petroleum supply monthly, August 1993

    SciTech Connect

    Not Available

    1993-09-01

    This publication the Petroleum Supply Monthly (PSM) is one of a family of four publications produced by the Petroleum Supply Division within the Energy Information Administration (EIA) reflecting different levels of data timeliness and completeness. The other publications are the Weekly Petroleum Status Report, (WPSR), the Winter Fuels Report, and the Petroleum Supply Annual (PSA). Data presented describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. Data presented are divided into Summary Statistics and Detailed Statistics.

  17. Carbonate petroleum reservoirs

    SciTech Connect

    Roehl, P.O.; Choquette, P.W.

    1985-01-01

    This book presents papers on the geology of petroleum deposits. Topics considered include diagenesis, porosity, dolomite reservoirs, deposition, reservoir rock, reefs, morphology, fracture-controlled production, Cenozoic reservoirs, Mesozoic reservoirs, and Paleozoic reservoirs.

  18. Petroleum Vapor Intrusion

    EPA Pesticide Factsheets

    One type of vapor intrusion is PVI, in which vapors from petroleum hydrocarbons such as gasoline, diesel, or jet fuel enter a building. Intrusion of contaminant vapors into indoor spaces is of concern.

  19. Petroleum marketing annual 1993

    SciTech Connect

    Not Available

    1995-01-01

    The Petroleum Marketing Annual (PMA) contains statistical data on a variety of crude oils and refined petroleum products. The publication provides statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the free-on-board (f.o.b.) and landed cost of imported crude oil, and the refiners acquisition cost of crude oil. Sales data for motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane are presented. For this publication, all estimates have been recalculated since their earlier publication in the Petroleum Marketing Monthly (PMM). These calculations made use of additional data and corrections that were received after the PMM publication dates.

  20. NAFTA opportunities: Petroleum refining

    SciTech Connect

    Not Available

    1993-01-01

    The North American Free Trade Agreement (NAFTA) creates a more transparent environment for the sale of refined petroleum products to Mexico, and locks in access to Canada's relatively open market for these products. Canada and Mexico are sizable United States export markets for refined petroleum products, with exports of $556 million and $864 million, respectively, in 1992. These markets represent approximately 24 percent of total U.S. exports of these goods.

  1. Fundamentals of petroleum maps

    SciTech Connect

    Mc Elroy, D.P.

    1986-01-01

    It's a complete guide to the fundamentals of reading, using, and making petroleum maps. The topics covered are well spotting, lease posting, contouring, hanging cross sections, and ink drafting. This book not only tells the how of petroleum mapping, but it also tells the why to better understand the principles and techniques. The books does not teach ''drafting,'' but does describe the proper care and use of drafting equipment for those who are totally new to the task.

  2. 1991 international petroleum encyclopedia

    SciTech Connect

    Not Available

    1991-01-01

    There is no other petroleum industry publication quite like the International Petroleum Encyclopedia. With a timely, accurate combination of global industry coverage and analysis, detailed statistical surveys, cutting-edge reports on technological advancements and the ever-popular atlas maps, the 1991 International Petroleum Encyclopedia is a smart buy for professionals whose business is oil and gas, as well as for those whose business is affected by the industry's trends and developments. Written by a professional staff of Oil and Gas Journal petroleum experts, the 1991 IPE gives you the all important global perspective for constructing sound business strategies for the 90's. The petroleum industry is scrambling for information that will help it survive this volitile period. This book reports on the topics in the petroleum industry the latest developments in horizontal drilling, world refining (the latest information on reformulated fuels), and predictions about the post-war Persian Gulf industry. PULS, discussions on changes in the Gulf of Mexico, developments in the LNG trade, and crude oil tanker supply/.demand curves.

  3. Used lubricating oil recycling using hydrocarbon solvents.

    PubMed

    Hamad, Ahmad; Al-Zubaidy, Essam; Fayed, Muhammad E

    2005-01-01

    A solvent extraction process using new hydrocarbon solvents was employed to treat used lubricant oil. The solvents used were liquefied petroleum gas (LPG) condensate and stabilized condensate. A demulsifier was used to enhance the treatment process. The extraction process using stabilized condensate demonstrated characteristics that make it competitive with existing used oil treatment technologies. The process is able to reduce the asphaltene content of the treated lubricating oil to 0.106% (w/w), the ash content to 0.108%, and the carbon residue to 0.315% with very low levels of contaminant metals. The overall yield of oil is 79%. The treated used oil can be recycled as base lubricating oil. The major disadvantage of this work is the high temperature of solvent recovery. Experimental work and results are presented in detail.

  4. Selective isolation of nitrogen bases from petroleum

    SciTech Connect

    Schmitter, J.M.; Ignatiadis, I.; Arpino, P.; Guiochon, G.

    1983-09-01

    A method has been designed for the rapid separation of nitrogen bases from petroleum by trapping their quaternary ammonium salts on hydrochloric acid treated silica. A chromatographic column filled with this adsorbent and equipped with a solvent recycling system allows a selective and quantitative extraction of basic compounds from large amounts (>100 g) of crude oil. The procedure has been tested with reference compounds, a coker gas-oil, and a heavy biodegraded crude and applied to 15 different oil samples. 22 references, 3 figures, 4 tables.

  5. 31 CFR 542.314 - Petroleum or petroleum products of Syrian origin.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 31 Money and Finance:Treasury 3 2014-07-01 2014-07-01 false Petroleum or petroleum products of... REGULATIONS General Definitions § 542.314 Petroleum or petroleum products of Syrian origin. The term petroleum or petroleum products of Syrian origin means petroleum or petroleum products of Syrian...

  6. Petroleum marketing monthly, May 1994

    SciTech Connect

    Not Available

    1994-05-26

    The Petroleum Marketing Monthly (PMM) provides information and statistical data on a variety of crude oils and refined petroleum products. The publication presents statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the f.o.b. and landed cost of imported crude oil, petroleum product sales data include motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane. The Petroleum Marketing Division, Office of Oil and Gas, Energy Information Administration ensures the accuracy, quality, and confidentiality of the published data in the Petroleum Marketing Monthly.

  7. Petroleum Marketing Annual, 1989

    SciTech Connect

    Not Available

    1990-12-18

    This report contains statistical data on a variety of crude oils and refined petroleum products. The publication provides statistics on crude oil costs and refined petroleum products sales for us by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the free-on-board (f.o.b.) and landed cost of imported crude oil, and the refiners' acquisition cost of crude oil. Sales data for motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane are presented. 13 figs., 51 tabs.

  8. Synthetic chromosomes.

    PubMed

    Schindler, Daniel; Waldminghaus, Torsten

    2015-11-01

    What a living organism looks like and how it works and what are its components-all this is encoded on DNA, the genetic blueprint. Consequently, the way to change an organism is to change its genetic information. Since the first pieces of recombinant DNA have been used to transform cells in the 1970s, this approach has been enormously extended. Bigger and bigger parts of the genetic information have been exchanged or added over the years. Now we are at a point where the construction of entire chromosomes becomes a reachable goal and first examples appear. This development leads to fundamental new questions, for example, about what is possible and desirable to build or what construction rules one needs to follow when building synthetic chromosomes. Here we review the recent progress in the field, discuss current challenges and speculate on the appearance of future synthetic chromosomes.

  9. Petroleum supply monthly, August 1994

    SciTech Connect

    Not Available

    1994-08-26

    Data presented in the Petroleum Supply Monthly (PSM) describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics.

  10. Petroleum marketing monthly, June 1994

    SciTech Connect

    Not Available

    1994-06-01

    The Petroleum Marketing Monthly (PMM) provides information and statistical data on a variety of crude oils and refined petroleum products. The publication presents statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the f.o.b. and landed cost of imported crude oil, and the refiners` acquisition cost of crude oil. Refined petroleum product sales data include motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane. Monthly statistics on purchases of crude oil and sales of petroleum products are presented in five sections: Summary Statistics; Crude Oil Prices; Prices of Petroleum Products; Volumes of Petroleum Products; and Prime Supplier Sales Volumes of Petroleum Products for Local Consumption. The feature article is entitled ``The Second Oxygenated Gasoline Season.`` 7 figs., 50 tabs.

  11. Petroleum supply monthly, July 1993

    SciTech Connect

    Not Available

    1993-07-29

    Data presented in the Petroleum Supply Monthly (PSM) describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: Petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States.

  12. Petroleum marketing monthly, July 1994

    SciTech Connect

    Not Available

    1994-07-01

    The Petroleum Marketing Monthly (PMM) provides information and statistical data on a variety of crude oils and refined petroleum products. The publication presents statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the f.o.b. and landed cost of imported crude oil, and the refiners` acquisition cost of crude oil. Refined petroleum product sales data include motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane. Monthly statistics on purchases of crude oil and sales of petroleum products are presented in five sections: summary statistics; crude oil prices; prices of petroleum products; volumes of petroleum products; and prime supplier sales volumes of petroleum products for local consumption. 7 figs., 50 tabs.

  13. National Standard Petroleum Oil Tables

    DTIC Science & Technology

    1936-03-04

    largely according to the recommendations of a committee appointed by the American Petroleum Institute to represent the petroleum industry. In order to... Petroleum Institute , the U. S. Bureau of Mines, and the National Bureau of Standards, in December 1921, agreed to recommend that in the future only...overcome the confusion that has existed in the petroleum-oil industry by reason of the use of two so-called Baume scales for light liquids, the American

  14. Petroleum supply monthly, April 1990

    SciTech Connect

    1990-06-26

    The Petroleum Supply Monthly (PSM) is one of a family of three publications produced by the Petroleum Supply Division within the Energy Information Administration (EIA) reflecting different levels of data timeliness and completeness. The other two publications are the Weekly Petroleum Status Report (WPSR) and the Petroleum Supply Annual (PSA). Data presented in the Petroleum Supply Monthly describe (PSM) the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in Primary Supply.'' Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States. Data presented in the PSM are divided into two sections: (1) the Summary Statistics and (2) the Detailed Statistics.

  15. Chemical Principles Revisited: Petroleum Chemistry.

    ERIC Educational Resources Information Center

    Kolb, Doris; Kolb, Kenneth E.

    1979-01-01

    Presents an historical review of the role of petroleum in world history and information on the chemistry of petroleum. It is suggested that petroleum chemistry be discussed since within the next two decades oil and gas will provide the major portion of U.S. energy. (Author/SA)

  16. Petroleum lands and leasing

    SciTech Connect

    Burk, J.

    1984-01-01

    This is a reference book for the lessor, lessee, royalty owner, PLM student and landman. Contents: A historical background; Rights of ownership; Instruments of conveyance; Who owns this land. The oil and gas lease and leasing procedures; Curing titles; Pooling and utilization; Contracts and agreements; Lease maintenance; Land measurements and descriptions; Code of ethics; American Association of Petroleum Landmen; Glossary.

  17. Petroleum-derived carbons

    SciTech Connect

    Bacha, J.D.; Newman, J.W.; White, J.L.

    1986-01-01

    This book presents the papers given at a symposium on petroleum coke. Topics considered at the symposium included mesophase formation, thermal analysis, rheology, microstructure, carbon fibers, electron microscopy, residual oil processing, synthetic aromatic pitch, delayed coking, calcination, desulfurization, graphite, metallurgical coke, carbon black, natural gas pyrolysis, liquid impregnation, and carbon-carbon composites.

  18. Non-Petroleum Oils

    EPA Pesticide Factsheets

    These include synthetics such as silicone fluids and tung oils, wood-derivative oils such as resin/rosin, animal fats/oil, and seed oils. Many have similar physical properties to petroleum-based, such as water insolubility and formation of slicks.

  19. Petroleum Vapor - Field Technical

    EPA Science Inventory

    The screening approach being developed by EPA OUST to evaluate petroleum vapor intrusion (PVI) requires information that has not be routinely collected in the past at vapor intrusion sites. What is the best way to collect this data? What are the relevant data quality issues and ...

  20. Stoddard solvent poisoning

    MedlinePlus

    These products contain Stoddard solvent: Dry cleaning fluids Paints Paint thinner Stoddard solvent ( mineral spirits ) Toners used in copy machines This list may not include all products containing Stoddard solvent.

  1. Petroleum supply monthly, May 1994

    SciTech Connect

    Not Available

    1994-05-27

    The Petroleum Supply Monthly (PSM) is one of a family of four publications produced by the Petroleum Supply Division within the Energy Information Administration (EIA) reflecting different levels of data timeliness and completeness. The other publications are the Weekly Petroleum Status Report (WPSR), the Winter Fuels Report, and the Petroleum supply annual (PSA). Data presented in the PSM describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics.

  2. Petroleum supply monthly, January 1996

    SciTech Connect

    1996-02-15

    The Petroleum Supply Monthly (PSM) is one of a family of four publications produced by the Petroleum Supply Division within the Energy Information Administration (EIA) reflecting different levels of data timeliness and completeness. The other publications are the Weekly Petroleum Status Report (WPSR), the Winter Fuels Report, and the Petroleum Supply Annual (PSA). Data presented in the PSM describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics.

  3. Petroleum supply monthly, September 1991

    SciTech Connect

    Not Available

    1991-09-30

    The Petroleum Supply Monthly (PSM) is one of a family of three publications produced by the Petroleum Supply Division within the Energy Information Administration (EIA) reflecting different levels of data timeliness and completeness. The other two publications are the Weekly Petroleum Status Report (WPSR) and the Petroleum Supply Annual (PSA). Data presented in PSM describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administrations for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 states and the District of Columbia). The reporting universe includes those petroleum sectors in Primary Supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States. Data presented in the PSM are divided into two sections (1) the Summary Statistics and (2) the Detailed Statistics. 65 tabs.

  4. Petroleum supply monthly, October 1993

    SciTech Connect

    Not Available

    1993-10-26

    The Petroleum Supply Monthly (PSM) is one of a family of four publications produced by the Petroleum Supply Division within the Energy Information Administration (EIA) reflecting different levels of data timeliness and completeness. The other publications are the Weekly Petroleum Status Report (WPSR), the Winter Fuels Report, and the Petroleum Supply Annual (PSA). Data presented in the PSM describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics.

  5. Petroleum supply monthly, June 1994

    SciTech Connect

    Not Available

    1994-06-28

    The Petroleum Supply Monthly (PSM) is one of a family of four publications produced by the Petroleum Supply Division within the Energy Information Administration (EIA) reflecting different levels of data timeliness and completeness. The other publications are the Weekly Petroleum Status Report (WPSR), the Winter Fuels Report, and the Petroleum Supply Annual (PSA). Data presented in the PSM describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics.

  6. Petroleum Supply Monthly, August 1990

    SciTech Connect

    Not Available

    1990-10-30

    The Petroleum Supply Monthly (PSM) is one of a family of three publications produced by the Petroleum Supply Division within the Energy Information administration (EIA) reflecting different levels of data timeliness and completeness. The other two publications are the Weekly Petroleum Status Report (WPSR) and the Petroleum Supply Annual (PSA). Data presented in the PSM describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) district movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in Primary Supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States. Data presented in the PSM are divided into two sections (1) the Summary Statistics and (2) the Detailed Statistics.

  7. Petroleum supply monthly, July 1994

    SciTech Connect

    Not Available

    1994-07-26

    The Petroleum Supply Monthly (PSM) is one of a family of four publications produced by the Petroleum Supply Division within the Energy Information Administration (EIA) reflecting different levels of data timeliness and completeness. The other publications are the Weekly Petroleum Status Report (WPSR), the Winter Fuels Report, and the Petroleum Supply Annual (PSA). Data presented in the PSM describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics.

  8. Petroleum Supply Monthly, July 1990

    SciTech Connect

    Not Available

    1990-09-28

    Data presented in the PSM describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 states and the District of Columbia). The reporting universe includes those petroleum sectors in Primary Supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States.

  9. Strategic Petroleum Reserve quarterly report

    SciTech Connect

    1995-11-15

    The Strategic Petroleum Reserve was created pursuant to the Energy Policy and Conservation Act of December 22, 1975 (Public Law 94-163). Its purposes are to reduce the impact of disruptions in supplies of petroleum products and to carry out obligations of the United States under the Agreement on an International Energy Program. Section 165(a) of the Act requires the submission of Annual Reports and Section 165(b)(1) requires the submission of Quarterly Reports. This Quarterly Report highlights activities undertaken during the third quarter of calendar year 1995, including: inventory of petroleum products stored in the Reserve; current storage capacity and ullage available; current status of the Strategic Petroleum Reserve storage facilities, major projects and the acquisition of petroleum products; funds obligated by the Secretary from the SPR Petroleum Account and the Strategic Petroleum Reserve Account during the prior calendar quarter and in total; and major environmental actions completed, in progress, or anticipated.

  10. Chromosome Microarray.

    PubMed

    Anderson, Sharon

    2016-01-01

    Over the last half century, knowledge about genetics, genetic testing, and its complexity has flourished. Completion of the Human Genome Project provided a foundation upon which the accuracy of genetics, genomics, and integration of bioinformatics knowledge and testing has grown exponentially. What is lagging, however, are efforts to reach and engage nurses about this rapidly changing field. The purpose of this article is to familiarize nurses with several frequently ordered genetic tests including chromosomes and fluorescence in situ hybridization followed by a comprehensive review of chromosome microarray. It shares the complexity of microarray including how testing is performed and results analyzed. A case report demonstrates how this technology is applied in clinical practice and reveals benefits and limitations of this scientific and bioinformatics genetic technology. Clinical implications for maternal-child nurses across practice levels are discussed.

  11. Extraction of petroleum hydrocarbons from soil by mechanical shaking

    SciTech Connect

    Schwab, A.P.; Su, J.; Wetzel, S.; Pekarek, S.; Banks, M.K.

    1999-06-01

    A shaking extraction method for petroleum hydrocarbons in soil was developed and compared to Soxhlet extraction. Soxhlet extraction is an EPA-approved method for volatile and semivolatile organic contaminants from solid materials, but it has many disadvantages including long extraction periods and potential loss of volatile compounds. When field-moist soils are used, variability in subsamples is higher, and the extraction of hydrocarbons with a nonpolar solvent may be less efficient. A shaking method was designed to fill the need for simpler and more efficient extraction of petroleum hydrocarbons from soil. A systematic study of extraction conditions was performed for various soil types, soil weights, solvents, extraction times, and extraction cycles. The results were compared to those for Soxhlet extraction. Shaking 1 g of soil with a sequence of three 10-mL aliquots of dichloromethane or acetone was found to be equivalent to Soxhlet extraction for total petroleum hydrocarbons and polycyclic aromatic hydrocarbons. Shaking with acetone was more consistent than all other methods for the extraction of specific compounds from aged, contaminated soil. The shaking method appears to be applicable to a wide range of soil types and petroleum contaminants but should be compared to Soxhlet extraction for new conditions.

  12. Chromosome Analysis

    NASA Technical Reports Server (NTRS)

    1998-01-01

    Perceptive Scientific Instruments, Inc., provides the foundation for the Powergene line of chromosome analysis and molecular genetic instrumentation. This product employs image processing technology from NASA's Jet Propulsion Laboratory and image enhancement techniques from Johnson Space Center. Originally developed to send pictures back to earth from space probes, digital imaging techniques have been developed and refined for use in a variety of medical applications, including diagnosis of disease.

  13. Norwegian petroleum guide

    SciTech Connect

    Christie, H.B.

    1984-01-01

    This is about the comprehensive guide to Norwegian oil and gas activities, very useful to anyone in the industry. Material includes political guidelines, control institutions, work possibilities and licenses, working environment law, employer and employee organizations, national insurance, taxes, communication, rescue operations and standby. Contents: Oil and the economy; Petroleum technology research; Responsibilities of different authorities; The Labour Inspection Directorate; The Health Directorate Offshore Office; The Coastal Directorate; Helicopter traffic; The Norwegian Petroleum Directorate; The Maritime Directorate; Det norske Veritas; The Norwegian Waterways and Electricity Board; The State Institute for Radiation Hygiene; The State Explosive Inspection; Work possibilities in the North Sea; Working environment legislation on the Continental Shelf; Collective bargaining agreements, labor conflicts and the right to organize; Taxation Rules; National health insurance and the petroleum activity; Occupational injuries on the Norwegian Continental Shelf; Company insurances; The private pension scheme; Other types of insuracne common among oil companies; The rescue service in Norway; Oganizations within the oil industry offshore and onshore; and Law of aliens admission to the Kindgom.

  14. Distribution of zirconium in petroleum sulfoxides during extraction and sorption from nitric and hydrochloric acid solutions

    SciTech Connect

    Turanov, A.N.

    1988-11-20

    Petroleum sulfoxides (PSO) are effective extractants for several metals. We discussed the distribution of petroleum sulfoxides and zirconium between aqueous solutions of hydrochloric and nitric acid and organic solvents, and also the macroporous sorbent impregnated with PSO. For the investigation we used a macroposous copolymer of styrene with divinylbenzene. Our investigation showed a noticeable decrease in the contamination of the raffinates by petroleum sulfoxides and their more complete utilization as extractant of metals from solutions of acids when PSO is deposited on a macroporous copolymer of styrene with divinylbenzene.

  15. Solvent wash solution

    DOEpatents

    Neace, J.C.

    1984-03-13

    A process is claimed for removing diluent degradation products from a solvent extraction solution, which has been used to recover uranium and plutonium from spent nuclear fuel. A wash solution and the solvent extraction solution are combined. The wash solution contains (a) water and (b) up to about, and including, 50 vol % of at least one-polar water-miscible organic solvent based on the total volume of the water and the highly-polar organic solvent. The wash solution also preferably contains at least one inorganic salt. The diluent degradation products dissolve in the highly-polar organic solvent and the organic solvent extraction solvent do not dissolve in the highly-polar organic solvent. The highly-polar organic solvent and the extraction solvent are separated.

  16. Solvent wash solution

    DOEpatents

    Neace, James C.

    1986-01-01

    Process for removing diluent degradation products from a solvent extraction solution, which has been used to recover uranium and plutonium from spent nuclear fuel. A wash solution and the solvent extraction solution are combined. The wash solution contains (a) water and (b) up to about, and including, 50 volume percent of at least one-polar water-miscible organic solvent based on the total volume of the water and the highly-polar organic solvent. The wash solution also preferably contains at least one inorganic salt. The diluent degradation products dissolve in the highly-polar organic solvent and the organic solvent extraction solvent do not dissolve in the highly-polar organic solvent. The highly-polar organic solvent and the extraction solvent are separated.

  17. Liquid-vapor equilibrium in the systems hexane-benzene-petroleum sulfoxides-diethylene glycol and hexane-benzene-petroleum sulfoxides-dimethylformamide

    SciTech Connect

    Vakhitova, N.G.; Baikova, A.Y.; Murinov, Y.I.; Nikitin, Y.E.

    1985-12-01

    This paper reports the results of studies of liquid-vapor equilibrium in the benzene-hexane system in presence of binary extractants: petroleum sulfoxide-dimethylformamide (DMFA) and petroleum sulfoxide-diethylene glycol (DEG). The physicochemical properties of the extractants are presented and the influence of the content of slelective solvent on vapor-liquid equilibrium was studied; the total concentration of the binary solvent in the experiments was 50 vol. %. Results also show that the introduction of a second solvent into petroleum sulfoxides alters the vapor-liquid equilibrium in the system substantially. The volatility of hexane is increased considerably, especially in the case of the PSO-DMFA mixed extractant. In the case of benzene, petroleum sulfoxides and their mixtures with diethylene glycol and dimethylformamide are approximately equal in effectiveness in the region of low benzene concentrations. In the region of high benzene concentrations mixed extractants are more effective than petroleum sulfoxides; this is decisive for isolation of aromatic hydrocarbons from mixtures rich in aromatics.

  18. Carotenoid extraction from plants using a novel, environmentally friendly solvent.

    PubMed

    Ishida, Betty K; Chapman, Mary H

    2009-02-11

    Few environmentally friendly solvents are available to extract carotenoids for use in foods. The most effective known solvents are products of the petroleum industry and toxic for human consumption. Yet carotenoid extracts are desirable for use in dietary supplements and as additives to enhance the health benefits of processed foods. Ethyl lactate is an excellent solvent to extract both trans- and cis-lycopene isomers from dried tomato powder, the extraction efficiency of which is enhanced by the addition of the antioxidants alpha-tocopherol and alpha-lipoic acid, both of which are known to benefit human health. It is also useful to extract lutein and beta-carotene from dried powders prepared from white corn and carrots. Because of its low flammability and its origin as a byproduct of the corn and soybean industries, it is more advantageous than ethyl acetate, which is a petroleum product.

  19. Petroleum marketing monthly, September 1994

    SciTech Connect

    Not Available

    1994-09-01

    The Petroleum Marketing Monthly (PMM) provides information and statistical data on a variety of crude oils and refined petroleum products. The publication presents statistics on crude oil costs and refined petroleum product sales for use by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the f.o.b. and landed cost of imported crude oil, and the refiners` acquisition cost of crude oil. Refined petroleum product sales data include motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane. The Petroleum Marketing Division, Office of Oil and Gas, Energy Information Administration ensures the accuracy, quality, and confidentiality of the published data in the Petroleum Marketing Monthly.

  20. Microbial degradation of petroleum hydrocarbons.

    PubMed

    Varjani, Sunita J

    2017-01-01

    Petroleum hydrocarbon pollutants are recalcitrant compounds and are classified as priority pollutants. Cleaning up of these pollutants from environment is a real world problem. Bioremediation has become a major method employed in restoration of petroleum hydrocarbon polluted environments that makes use of natural microbial biodegradation activity. Petroleum hydrocarbons utilizing microorganisms are ubiquitously distributed in environment. They naturally biodegrade pollutants and thereby remove them from the environment. Removal of petroleum hydrocarbon pollutants from environment by applying oleophilic microorganisms (individual isolate/consortium of microorganisms) is ecofriendly and economic. Microbial biodegradation of petroleum hydrocarbon pollutants employs the enzyme catalytic activities of microorganisms to enhance the rate of pollutants degradation. This article provides an overview about bioremediation for petroleum hydrocarbon pollutants. It also includes explanation about hydrocarbon metabolism in microorganisms with a special focus on new insights obtained during past couple of years.

  1. Petroleum marketing monthly, August 1994

    SciTech Connect

    Not Available

    1994-08-15

    The Petroleum Marketing Monthly (PMM) provides information and statistical data on a variety of crude oils and refined petroleum products. The publication presents statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the f.o.b. and landed cost of imported crude oil, and the refiners` acquisition cost of crude oil. Refined petroleum product Sales data include motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane. The Petroleum Marketing Division, Office of Oil and Gas, Energy Information Administration ensures the accuracy, quality, and confidentiality of the published data in the Petroleum Marketing Monthly.

  2. Strategic Petroleum Reserve quarterly report

    SciTech Connect

    Not Available

    1990-08-15

    The Strategic Petroleum Reserve Quarterly Report is submitted in accordance with section 165(b) of the Energy Policy and Conservation Act, as amended, which requires that the Secretary of Energy submit quarterly reports to Congress on Activities undertaken with respect to the Strategic Petroleum Reserve. This August 15, 1990, Strategic Petroleum Reserve Quarterly Report describes activities related to the site development, oil acquisition, budget and cost of the Reserve during the period April 1, 1990, through June 30, 1990. 3 tabs.

  3. Petroleum marketing monthly, December 1995

    SciTech Connect

    1995-12-05

    This publication provides information and statistical data on a variety of crude oils and refined petroleum products. It presents statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include domestic first purchase price, f.o.b. and landed cost of imported crude, and refiners` acquisition cost of crude. Refined petroleum product sales data include motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane.

  4. Petroleum supply monthly: December 1993

    SciTech Connect

    Not Available

    1993-12-01

    Data are presented which describe the supply and disposition of petroleum products in the United States and major U.S. geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States. Data are presented in two sections: Summary Statistics, presenting a time series of selected petroleum data on a U.S. level, and Detailed Statistics, presenting statistics for the most current month available as well as year to date.

  5. 31 CFR 542.412 - Transactions relating to Syrian petroleum or petroleum products from third countries...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... petroleum or petroleum products from third countries; transshipments. 542.412 Section 542.412 Money and... Syrian petroleum or petroleum products from third countries; transshipments. (a) Transactions relating to goods containing petroleum or petroleum products of Syrian origin are not prohibited by § 542.208...

  6. 19 CFR 151.47 - Optional entry of net quantity of petroleum or petroleum products.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 19 Customs Duties 2 2012-04-01 2012-04-01 false Optional entry of net quantity of petroleum or petroleum products. 151.47 Section 151.47 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF... Petroleum and Petroleum Products § 151.47 Optional entry of net quantity of petroleum or petroleum...

  7. 15 CFR Supplement No. 1 to Part 754 - Petroleum and Petroleum Products

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 15 Commerce and Foreign Trade 2 2012-01-01 2012-01-01 false Petroleum and Petroleum Products No... SUPPLY CONTROLS Pt. 754, Supp. 1 Supplement No. 1 to Part 754—Petroleum and Petroleum Products This... petroleum (including reconstituted crude petroleum), tar sands and crude shale oil. 2710.0710...

  8. 19 CFR 151.47 - Optional entry of net quantity of petroleum or petroleum products.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 19 Customs Duties 2 2010-04-01 2010-04-01 false Optional entry of net quantity of petroleum or petroleum products. 151.47 Section 151.47 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF... Petroleum and Petroleum Products § 151.47 Optional entry of net quantity of petroleum or petroleum...

  9. 15 CFR Supplement No. 1 to Part 754 - Petroleum and Petroleum Products

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 15 Commerce and Foreign Trade 2 2011-01-01 2011-01-01 false Petroleum and Petroleum Products No... SUPPLY CONTROLS Pt. 754, Supp. 1 Supplement No. 1 to Part 754—Petroleum and Petroleum Products This... petroleum (including reconstituted crude petroleum), tar sands and crude shale oil. 2710.0710...

  10. 19 CFR 151.47 - Optional entry of net quantity of petroleum or petroleum products.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 19 Customs Duties 2 2013-04-01 2013-04-01 false Optional entry of net quantity of petroleum or petroleum products. 151.47 Section 151.47 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF... Petroleum and Petroleum Products § 151.47 Optional entry of net quantity of petroleum or petroleum...

  11. 19 CFR 151.47 - Optional entry of net quantity of petroleum or petroleum products.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 19 Customs Duties 2 2014-04-01 2014-04-01 false Optional entry of net quantity of petroleum or petroleum products. 151.47 Section 151.47 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF... Petroleum and Petroleum Products § 151.47 Optional entry of net quantity of petroleum or petroleum...

  12. 15 CFR Supplement No. 1 to Part 754 - Petroleum and Petroleum Products

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 15 Commerce and Foreign Trade 2 2014-01-01 2014-01-01 false Petroleum and Petroleum Products No... SUPPLY CONTROLS Pt. 754, Supp. 1 Supplement No. 1 to Part 754—Petroleum and Petroleum Products This... petroleum (including reconstituted crude petroleum), tar sands and crude shale oil. 2710.0710...

  13. 15 CFR Supplement No. 1 to Part 754 - Petroleum and Petroleum Products

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 15 Commerce and Foreign Trade 2 2013-01-01 2013-01-01 false Petroleum and Petroleum Products No... SUPPLY CONTROLS Pt. 754, Supp. 1 Supplement No. 1 to Part 754—Petroleum and Petroleum Products This... petroleum (including reconstituted crude petroleum), tar sands and crude shale oil. 2710.0710...

  14. 19 CFR 151.47 - Optional entry of net quantity of petroleum or petroleum products.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 19 Customs Duties 2 2011-04-01 2011-04-01 false Optional entry of net quantity of petroleum or petroleum products. 151.47 Section 151.47 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF... Petroleum and Petroleum Products § 151.47 Optional entry of net quantity of petroleum or petroleum...

  15. 15 CFR Supplement No. 1 to Part 754 - Petroleum and Petroleum Products

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 15 Commerce and Foreign Trade 2 2010-01-01 2010-01-01 false Petroleum and Petroleum Products No... SUPPLY CONTROLS Pt. 754, Supp. 1 Supplement No. 1 to Part 754—Petroleum and Petroleum Products This... petroleum (including reconstituted crude petroleum), tar sands and crude shale oil. 2710.0710...

  16. Underground petroleum tanks

    SciTech Connect

    Not Available

    1990-07-01

    This book presents the results of a survey of 46 state underground storage tank program officials. The survey covers: Whether petroleum tank insurance (mandated by the EPA) is available in each state and whether category 3 and 4 owners can obtain it; state programs that help owners meet the financial responsibility and/or technical requirements of such insurance; and lending institutions' attitudes towards providing loans to storage tank owners. A survey of the number and terms of insurance policies offered to tank owners is also presented.

  17. International petroleum statistics report

    SciTech Connect

    1995-10-01

    The International Petroleum Statistics Report is a monthly publication that provides current international oil data. This report presents data on international oil production, demand, imports, exports and stocks. The report has four sections. Section 1 contains time series data on world oil production, and on oil demand and stocks in the Organization for Economic Cooperation and Development (OECD). Section 2 presents an oil supply/demand balance for the world, in quarterly intervals for the most recent two years. Section 3 presents data on oil imports by OECD countries. Section 4 presents annual time series data on world oil production and oil stocks, demand, and trade in OECD countries.

  18. Petroleum supply monthly, June 1993

    SciTech Connect

    Not Available

    1993-06-28

    Data presented in the Petroleum Supply Monthly (PSM) describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics. The tables and figures ih the Summary Statistics section of the PSM present a time series of selected petroleum data on a US level. Most time series include preliminary estimates for one month based on the Weekly Petroleum Supply Reporting System; statistics based on the most recent data from the Monthly Petroleum Supply Reporting System (MPSRS); and statistics published in prior issues of the PSM and PSA. The Detailed Statistics tables of the PSM present statistics for the most current month available as well as year-to-date. In most cases, the statistics are presented for several geographic areas - - the United States (50 States and the District of Columbia), five PAD Districts, and 12 Refining Districts. At the US and PAD District level, the total volume and the daily rate of activities are presented. The statistics are developed from monthly survey forms submitted by respondents to the EIA and from data provided firom other sources.

  19. Petroleum supply monthly, March 1994

    SciTech Connect

    Not Available

    1994-03-30

    Data presented in the Petroleum Supply Monthly (PSM) describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics. The tables and figures in the Summary Statistics section of the PSM present a time series of selected petroleum data on a US level. Most time series include preliminary estimates for one month based on the Weekly Petroleum Supply Reporting System; statistics based on the most recent data from the Monthly Petroleum Supply Reporting System (MPSRS); and statistics published in prior issues of the PSM and PSA. The Detailed Statistics tables of the PSM present statistics for the most current month available as well as year-to-date. In most cases, the statistics are presented for several geographic areas -- the United States (50 States and the District of Columbia), five PAD Districts, and 12 Refining Districts. At the US and PAD District level, the total volume and the daily rate of activities are presented. The statistics are developed from monthly survey forms submitted by respondents to the EIA and from data provided from other sources.

  20. Chemical Characterization of Crude Petroleum Using Nanospray Desorption Electrospray Ionization Coupled with High-Resolution Mass Spectrometry

    SciTech Connect

    Eckert, Peter A.; Roach, Patrick J.; Laskin, Alexander; Laskin, Julia

    2012-02-07

    Nanospray desorption electrospray ionization (nano-DESI) combined with high-resolution mass spectrometry was used for the first time for the analysis of liquid petroleum crude oil samples. The analysis was performed in both positive and negative ionization modes using three solvents one of which (acetonitrile/toluene mixture) is commonly used in petroleomics studies while two other polar solvents (acetonitrile/water and methanol/water mixtures) are generally not compatible with petroleum characterization using mass spectrometry. The results demonstrate that nano-DESI analysis efficiently ionizes petroleum constituents soluble in a particular solvent. When acetonitrile/toluene is used as a solvent, nano-DESI generates electrospray-like spectra. In contrast, strikingly different spectra were obtained using acetonitrile/water and methanol/water. Comparison with the literature data indicates that these solvents selectively extract water-soluble constituents of the crude oil. Water-soluble compounds are predominantly observed as sodium adducts in nano-DESI spectra indicating that addition of sodium to the solvent may be a viable approach for efficient ionization of water-soluble crude oil constituents. Nano-DESI enables rapid screening of different classes of compounds in crude oil samples using solvents that are rarely used for petroleum characterization.

  1. International petroleum statistics report

    SciTech Connect

    1997-05-01

    The International Petroleum Statistics Report is a monthly publication that provides current international oil data. This report is published for the use of Members of Congress, Federal agencies, State agencies, industry, and the general public. Publication of this report is in keeping with responsibilities given the Energy Information Administration in Public Law 95-91. The International Petroleum Statistics Report presents data on international oil production, demand, imports, and stocks. The report has four sections. Section 1 contains time series data on world oil production, and on oil demand and stocks in the Organization for Economic Cooperation and Development (OECD). This section contains annual data beginning in 1985, and monthly data for the most recent two years. Section 2 presents an oil supply/demand balance for the world. This balance is presented in quarterly intervals for the most recent two years. Section 3 presents data on oil imports by OECD countries. This section contains annual data for the most recent year, quarterly data for the most recent two quarters, and monthly data for the most recent twelve months. Section 4 presents annual time series data on world oil production and oil stocks, demand, and trade in OECD countries. World oil production and OECD demand data are for the years 1970 through 1995; OECD stocks from 1973 through 1995; and OECD trade from 1985 through 1995.

  2. Indigenous Precambrian petroleum revisited

    SciTech Connect

    Murray, G.E.; Kaczor, M.J.; McArthur, R.E.

    1980-10-01

    Irrefutable evidence of fossil remains from Precambrian sediments and proved petroleum reserves in upper Proterozoic (Riphean-Vendian) strata of the Irkutsk basin, USSR, suggest that unmetamorphosed Precambrian sedimentary rocks should be a focus for hydrocarbon exploration. Since 1965, a dramatic increase in publications which document worldwide occurrences of Precambrian life forms discloses that, by the end of the Proterozoic, organic evolution had produced diversified assemblages of relatively highly developed macroorganisms and microorganisms. Some of these organisms have generated crude oil in the Nonesuch Shale of northern Michigan and kerogen in stromatolitic carbonate rocks in Africa Kerogen has been extracted from approx. 2300-m.y. old Transvaal (Africa) stromatolitic limestone containing coccoid and complex filamentous cyanophytes. Also, aromatic and aliphatic hydrocarbons have been obtained from the approx. 2800-m.y. old Bulawayan stromatolitic limestone of Rhodesia. Additional evidence indicates that commercial reserves of petroleum from Precambrian strata are possible. An oil discovery in Lower Cambrian rocks in 1962, at Markovo in the Irkutsk basin of the Siberian platform area, led to four noncommercial and eight commercial fields producing from Lower Cambrian and Upper Proterozoic strata.

  3. Petroleum: An energy profile, 1999

    SciTech Connect

    1999-07-01

    This report prepared by the Energy Information Administration covers the following topics: petroleum production and end-use sectors; resources and reserves; exploration and production; LPG sources and processing; motor gasoline octane enhancement; constructing pipelines; the strategic petroleum reserve; imports and exports; marketing; district descriptions and maps; and refinery processes and facilities. 33 figs., 7 tabs.

  4. Petroleum occurrences and plate tectonics

    SciTech Connect

    Olenin, V.B.; Sokolov, B.A.

    1983-01-01

    This paper analyzes the mechanisms of petroleum formation and petroleum accumulation proposed in recent years by some Russian and foreign investigators from the viewpoint of the new global or plate tectonics. On the basis of discussion and the facts, the authors conclude that the mechanisms proposed are in contradiction to reality and their use in practical application is at least premature.

  5. Discrimination of petroleum fluorescence spectra.

    PubMed

    Stelmaszewski, Adam

    2007-01-01

    This paper presents studies of the total spectra (fluorescence-excitation matrix) of petroleum with regard to the utilization of fluorescence for determining petroleum pollutants. Thorough testing of one group, comprising almost forty lubricating oils in the form of their hexane solutions, points out their discrimination.

  6. Strategic petroleum reserve. Quarterly report

    SciTech Connect

    Not Available

    1994-05-15

    The Strategic Petroleum Reserve serves as one of our most important investments in reducing the Nation`s vulnerability to oil supply disruptions. Its existence provides an effective response mechanism should a disruption occur and a formidable deterrent to the use of oil as a political instrument. The Strategic Petroleum Reserve was created pursuant to the Energy Policy and Conservation Act of December 22, 1975, (Public Law 94-163) as amended, to reduce the impact of disruptions in supplies of petroleum products and to carry out obligations of the United States under the Agreement on an International Energy Program. Section 165(a) of the Act requires the submission of Annual Reports and Section 165(b)(1) requires the submission of Quarterly Reports. This Quarterly Report highlights activities undertaken during the first quarter of calendar year 1994, including: (1) inventory of petroleum products stored in the Reserve, under contract and in transit at the end of the calendar quarter; (2) fill rate for the current quarter and projected fill rate for the next calendar quarter; (3) average price of the petroleum products acquired during the calendar quarter; (4) current and projected storage capacity; (5) analysis of existing or anticipated problems with the acquisition and storage of petroleum products, and future expansion of storage capacity; (6) funds obligated by the Secretary from the SPR Petroleum Account and the Strategic Petroleum Reserve Account during the prior calendar quarter and in total; and (7) major environmental actions completed, in progress, or anticipated.

  7. Job Prospects for Petroleum Engineers.

    ERIC Educational Resources Information Center

    Basta, Nicholas

    1988-01-01

    Describes petroleum engineering as one area in industry where job opportunities are few but where the worst of the declines has been seen. Discusses the causes of the decline. Lists several areas where petroleum engineers have found alternatives including environmental projects, water supply projects, and computer applications. (CW)

  8. Strategic Petroleum Reserve quarterly report

    SciTech Connect

    Not Available

    1993-08-15

    This Quarterly Report highlights activities undertaken during the second quarter of calendar year 1993, including: inventory of petroleum products stored in the Reserve, under contract and in transit at the end of the calendar quarter; fill rate for the current quarter and projected fill rate for the next calendar quarter; average price of the petroleum products acquired during the calendar quarter; current and projected storage capacity and plans to accelerate the acquisition or construction of such capacity; analysis of existing or anticipated problems with the acquisition and storage of petroleum products, and future expansion of storage capacity; funds obligated by the Secretary from the SPR Petroleum Account and the Strategic Petroleum Reserve Account during the prior calendar quarter and in total; and major environmental actions completed, in progress, or anticipated.

  9. Solvents in novolak synthesis

    NASA Astrophysics Data System (ADS)

    Sobodacha, Chet J.; Lynch, Thomas J.; Durham, Dana L.; Paradis, Valerie R.

    1993-09-01

    Novolac resins may be prepared with or without a solvent present. We have found that solvent power greatly affects the properties of the finished resin and thus gives the resist chemist another variable with which to `fine-tune' resist properties. Using designed experiments, we investigated the effect of solvent power, as measured by Hansen's Solubility Parameters, of a number of solvents and solvent mixtures on the final properties of the novolac resin. We found that the relative molecular weight (RMW) and dissolution rate of a novolac resin can be varied by selection of a solvent or solvent mixture with the appropriate polarity and hydrogen- bonding characteristics. The solvent polarity and hydrogen-bonding characteristics may affect the stability of the cresol/formaldehyde transition state, thus causing the observed changes in RMW and dissolution rate.

  10. A new approach to supercritical solvent recovery in deasphalting

    SciTech Connect

    Hotier, G.; Cormerais, F.; Magnin, C. )

    1987-04-01

    The purpose of solvent deasphalting is to separate a petroleum heavy out into a low value solid or liquid product Deasphalted Oil or DAO, that will either be further converted or used as a lube oil base. This is realized by phase decantation when the solvent and the feed are mixed in an extractor. The refiners aim is to reach the maximum yield of a specified quality DAO. The factors that act on the linked couple yield-quality are: nature of solvent, temperature, pressure, solvent to feed volume ratio, extractor design (mixer-settler or countercurrent column), and temperature gap between products outlets. The main disadvantage of conventional solvent deasphalting is its solvent-DAO separation step, which is very costly in energy, since the solvent is vaporized under adverse conditions. The condensation heat of the solvent cannot be recycled to the process, because of its too low thermal level. This step represents about 60% of the operating costs. In a recent publication, Brule and Corbet pinpoint how important the knowledge of diphasic limits and the mixture critical point could be, for operating in the retrograde condensation area, while in another paper from Nelson and Roodman, it can be read that an increase in the solvent ratio from 5:1 to 10:1 causes only a 10% rise in total energy consumption. This study investigates factors which affect diphasic limits and energy consumption.

  11. Solvent Recycling for Shipyards

    DTIC Science & Technology

    1993-05-01

    alternatives to solvent cleaning. Typical equipment types that can be effectively cleaned with recycled solvents include spray guns paint hoses pumps...in place of solvent-based coatings; or equipment changes, such as the use of airless or HVLP systems to reduce paint consumption and overspray...Using mechanical cleaning methods instead of solvent cleaning Change from conventional painting to solventless processes such as thermal spray or powder

  12. NEPTUNIUM SOLVENT EXTRACTION PROCESS

    DOEpatents

    Dawson, L.R.; Fields, P.R.

    1959-10-01

    The separation of neptunium from an aqueous solution by solvent extraction and the extraction of neptunium from the solvent solution are described. Neptunium is separated from an aqueous solution containing tetravalent or hexavalent neptunium nitrate, nitric acid, and a nitrate salting out agent, such as sodium nitrate, by contacting the solution with an organic solvent such as diethyl ether. Subsequently, the neptunium nitrate is extracted from the organic solvent extract phase with water.

  13. Relationships between chromosome structure and chromosomal aberrations

    NASA Astrophysics Data System (ADS)

    Eidelman, Yuri; Andreev, Sergey

    An interphase nucleus of human lymphocyte was simulated by the novel Monte Carlo tech-nique. The main features of interphase chromosome structure and packaging were taken into account: different levels of chromatin organisation; nonrandom localisation of chromosomes within a nucleus; chromosome loci dynamics. All chromosomes in a nucleus were modelled as polymer globules. A dynamic pattern of intra/interchromosomal contacts was simulated. The detailed information about chromosomal contacts, such as distribution of intrachromoso-mal contacts over the length of each chromosome and dependence of contact probability on genomic separation between chromosome loci, were calculated and compared to the new exper-imental data obtained by the Hi-C technique. Types and frequencies of simple and complex radiation-induced chromosomal exchange aberrations (CA) induced by X-rays were predicted with taking formation and decay of chromosomal contacts into account. Distance dependence of exchange formation probability was calculated directly. mFISH data for human lymphocytes were analysed. The calculated frequencies of simple CA agreed with the experimental data. Complex CA were underestimated despite the dense packaging of chromosome territories within a nucleus. Possible influence of chromosome-nucleus structural organisation on the frequency and spectrum of radiation-induced chromosome aberrations is discussed.

  14. Strategic Petroleum Reserves

    SciTech Connect

    Not Available

    1989-01-01

    GAO examined approximately 40 alternative, nontraditional methods of acquiring oil for the Strategic Petroleum Reserve. The alternatives identified were compared to the current method of acquiring and financing SPR oil through congressional appropriations that are reported in the budget. When compared to the conventional method of financing oil, most of the proposals have certain benefits or advantages, but all of them have economic or other disadvantages. For example, some proposals would reduce the budget deficit by increasing government revenues but would raise prices to the consumer. Other proposals would reduce short-term expenditures (asset sales, leasing oil or indexed bonds). However, the proposals might increase long-term expenditures by more than the initial reduction in outlays.

  15. Strategic petroleum reserves

    SciTech Connect

    Not Available

    1989-04-01

    This report has examined approximately 40 alternative, nontraditional methods of acquiring oil for the Strategic Petroleum Reserve. The alternatives identified are compared to the current method of acquiring and financing SPR oil through congressional appropriations that are reported in the budget. When compared to the conventional method of financing oil, most of the proposals have certain benefits or advantages, but all of them have economic or other disadvantages. For example, some proposals would reduce the budget deficit by increasing government revenues but would raise prices to the consumer. Other proposals would reduce short-term expenditures (asset sales, leasing oil or indexed bonds). However, the proposals might increase long-term expenditures by more than the initial reduction in outlays.

  16. Solvents and sustainable chemistry

    PubMed Central

    Welton, Tom

    2015-01-01

    Solvents are widely recognized to be of great environmental concern. The reduction of their use is one of the most important aims of green chemistry. In addition to this, the appropriate selection of solvent for a process can greatly improve the sustainability of a chemical production process. There has also been extensive research into the application of so-called green solvents, such as ionic liquids and supercritical fluids. However, most examples of solvent technologies that give improved sustainability come from the application of well-established solvents. It is also apparent that the successful implementation of environmentally sustainable processes must be accompanied by improvements in commercial performance. PMID:26730217

  17. Solvent recycle/recovery

    SciTech Connect

    Paffhausen, M.W.; Smith, D.L.; Ugaki, S.N.

    1990-09-01

    This report describes Phase I of the Solvent Recycle/Recovery Task of the DOE Chlorinated Solvent Substitution Program for the US Air Force by the Idaho National Engineering Laboratory, EG G Idaho, Inc., through the US Department of Energy, Idaho Operations Office. The purpose of the task is to identify and test recovery and recycling technologies for proposed substitution solvents identified by the Biodegradable Solvent Substitution Program and the Alternative Solvents/Technologies for Paint Stripping Program with the overall objective of minimizing hazardous wastes. A literature search to identify recycle/recovery technologies and initial distillation studies has been conducted. 4 refs.

  18. Strategic petroleum reserve. Quarterly report

    SciTech Connect

    1995-08-15

    The Strategic Petroleum Reserve reduces the Nation`s vulnerability to oil supply disruptions. Its existence provides a formidable deterrent to the use of oil as a political instrument and an effective response mechanism should a disruption occur. The Strategic Petroleum Reserve was created pursuant to the Energy Policy and Conservation Act of December 22, 1975 (Public Law 94-163). Its purposes are to reduce the impact of disruptions in supplies of petroleum products and to carry out obligations of the United States under the Agreement on an International Energy Program. Section 165(a) of the Act requires the submission of Annual Reports and Section 165(b)(1) requires the submission of Quarterly Reports. This Quarterly Report highlights activities undertaken during the second quarter of calendar year 1995, including: inventory of petroleum products stored in the Reserve; current and projected storage capacity, analysis of existing or anticipated problems with the acquisition and storage of petroleum products, and future expansion of storage capacity; funds obligated by the Secretary from the SPR Petroleum Account and the Strategic Petroleum Reserve Account during the prior calendar quarter and in total; and major environmental actions completed, in progress, or anticipated.

  19. Petroleum fingerprinting: Effective identification of petroleum products at contaminated sites

    SciTech Connect

    Uhler, A.D.

    1997-07-01

    A critical issue in many environmental liability cases is the successful identification of the parties responsible for petroleum products that contaminate sites or properties. Identification of these parties is critical for owners of petroleum contaminated sites who are seeking to spread liability by identifying previous owners or operators of nearby properties who may be the source of, and thus be responsible for, the petroleum contamination at these sites. This issue is also critical for these potential defendants who will seek to demonstrate that the petroleum products associated with their activities could not be the source of the contamination in question. Finally, the issue is critical in situations where multiple responsible parties seek to equitably allocate among themselves shares of contamination and associated clean-up costs.

  20. Petroleum marketing monthly, August 1990

    SciTech Connect

    Not Available

    1990-11-07

    The Petroleum Marketing Monthly (PMM) is designed to give information and statistical data about a variety of crude oils and refined petroleum products. The publication provides statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the f.o.b. and landed cost of imported crude oil, and the refiners' acquisition cost of crude oil. Sales data for motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane are presented. 12 figs., 49 tabs.

  1. Petroleum marketing monthly, March 1994

    SciTech Connect

    Not Available

    1994-03-22

    The Petroleum Marketing Monthly is designed to give information and statistical data about a variety of crude oils and refined petroleum products. The publication provides statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysts, education institutions, and consumers. Data on crude oil include the domestic first purchase price, the f.o.b. and landed cost of imported crude oil, and the refiner`s acquisition cost of crude oil. Sales data for motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane are presented.

  2. Petroleum marketing monthly, November 1993

    SciTech Connect

    Not Available

    1993-11-09

    The Petroleum Marketing Monthly (PMM) is designed to give information and statistical data about a variety of crude oils and refined petroleum products. The publication provides statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the f.o.b. and landed costs of imported crude oil, and the refiner`s acquisition cost of crude oil. Sales data for motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane are presented.

  3. Petroleum marketing monthly, February 1994

    SciTech Connect

    Not Available

    1994-02-25

    The Petroleum Marketing Monthly is designed to give information and statistical data about a variety of crude oils and refined petroleum products. The publication provides statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the f.o.b. and landed cost of imported crude oil, and the refiner`s acquisition cost of crude oil. Sales data for motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane are presented.

  4. Human chromosome 8.

    PubMed Central

    Wood, S

    1988-01-01

    The role of human chromosome 8 in genetic disease together with the current status of the genetic linkage map for this chromosome is reviewed. Both hereditary genetic disease attributed to mutant alleles at gene loci on chromosome 8 and neoplastic disease owing to somatic mutation, particularly chromosomal translocations, are discussed. PMID:3070042

  5. 21 CFR 178.3710 - Petroleum wax.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 3 2013-04-01 2013-04-01 false Petroleum wax. 178.3710 Section 178.3710 Food and... and Production Aids § 178.3710 Petroleum wax. Petroleum wax may be safely used as a component of nonfood articles in contact with food, in accordance with the following conditions: (a) Petroleum wax is...

  6. 21 CFR 172.886 - Petroleum wax.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 3 2012-04-01 2012-04-01 false Petroleum wax. 172.886 Section 172.886 Food and... Multipurpose Additives § 172.886 Petroleum wax. Petroleum wax may be safely used in or on food, in accordance with the following conditions: (a) Petroleum wax is a mixture of solid hydrocarbons, paraffinic...

  7. 21 CFR 172.250 - Petroleum naphtha.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 3 2013-04-01 2013-04-01 false Petroleum naphtha. 172.250 Section 172.250 Food... Coatings, Films and Related Substances § 172.250 Petroleum naphtha. Petroleum naphtha may be safely used in..., essentially paraffinic and naphthenic in nature obtained from petroleum, (b) The additive is refined to...

  8. 31 CFR 561.319 - Petroleum products.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 31 Money and Finance:Treasury 3 2012-07-01 2012-07-01 false Petroleum products. 561.319 Section... Definitions § 561.319 Petroleum products. The term petroleum products includes unfinished oils, liquefied petroleum gases, pentanes plus, aviation gasoline, motor gasoline, naphtha-type jet fuel, kerosene-type...

  9. 31 CFR 561.319 - Petroleum products.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 31 Money and Finance:Treasury 3 2014-07-01 2014-07-01 false Petroleum products. 561.319 Section... Definitions § 561.319 Petroleum products. The term petroleum products includes unfinished oils, liquefied petroleum gases, pentanes plus, aviation gasoline, motor gasoline, naphtha-type jet fuel, kerosene-type...

  10. 31 CFR 561.319 - Petroleum products.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 31 Money and Finance:Treasury 3 2013-07-01 2013-07-01 false Petroleum products. 561.319 Section... Definitions § 561.319 Petroleum products. The term petroleum products includes unfinished oils, liquefied petroleum gases, pentanes plus, aviation gasoline, motor gasoline, naphtha-type jet fuel, kerosene-type...

  11. 21 CFR 178.3710 - Petroleum wax.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 3 2012-04-01 2012-04-01 false Petroleum wax. 178.3710 Section 178.3710 Food and... and Production Aids § 178.3710 Petroleum wax. Petroleum wax may be safely used as a component of nonfood articles in contact with food, in accordance with the following conditions: (a) Petroleum wax is...

  12. 21 CFR 172.250 - Petroleum naphtha.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 3 2012-04-01 2012-04-01 false Petroleum naphtha. 172.250 Section 172.250 Food... Coatings, Films and Related Substances § 172.250 Petroleum naphtha. Petroleum naphtha may be safely used in..., essentially paraffinic and naphthenic in nature obtained from petroleum, (b) The additive is refined to...

  13. 21 CFR 178.3710 - Petroleum wax.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 3 2011-04-01 2011-04-01 false Petroleum wax. 178.3710 Section 178.3710 Food and... and Production Aids § 178.3710 Petroleum wax. Petroleum wax may be safely used as a component of nonfood articles in contact with food, in accordance with the following conditions: (a) Petroleum wax is...

  14. 21 CFR 178.3710 - Petroleum wax.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 3 2014-04-01 2014-04-01 false Petroleum wax. 178.3710 Section 178.3710 Food and... Petroleum wax. Petroleum wax may be safely used as a component of nonfood articles in contact with food, in accordance with the following conditions: (a) Petroleum wax is a mixture of solid hydrocarbons, paraffinic...

  15. 21 CFR 172.886 - Petroleum wax.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 3 2011-04-01 2011-04-01 false Petroleum wax. 172.886 Section 172.886 Food and... Multipurpose Additives § 172.886 Petroleum wax. Petroleum wax may be safely used in or on food, in accordance with the following conditions: (a) Petroleum wax is a mixture of solid hydrocarbons, paraffinic...

  16. 21 CFR 172.886 - Petroleum wax.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Petroleum wax. 172.886 Section 172.886 Food and... Multipurpose Additives § 172.886 Petroleum wax. Petroleum wax may be safely used in or on food, in accordance with the following conditions: (a) Petroleum wax is a mixture of solid hydrocarbons, paraffinic...

  17. 21 CFR 172.250 - Petroleum naphtha.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 3 2014-04-01 2014-04-01 false Petroleum naphtha. 172.250 Section 172.250 Food... § 172.250 Petroleum naphtha. Petroleum naphtha may be safely used in food in accordance with the... naphthenic in nature obtained from petroleum, (b) The additive is refined to meet the...

  18. 21 CFR 172.250 - Petroleum naphtha.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Petroleum naphtha. 172.250 Section 172.250 Food and..., Films and Related Substances § 172.250 Petroleum naphtha. Petroleum naphtha may be safely used in food..., essentially paraffinic and naphthenic in nature obtained from petroleum, (b) The additive is refined to...

  19. 21 CFR 178.3710 - Petroleum wax.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Petroleum wax. 178.3710 Section 178.3710 Food and... and Production Aids § 178.3710 Petroleum wax. Petroleum wax may be safely used as a component of nonfood articles in contact with food, in accordance with the following conditions: (a) Petroleum wax is...

  20. 21 CFR 172.250 - Petroleum naphtha.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 3 2011-04-01 2011-04-01 false Petroleum naphtha. 172.250 Section 172.250 Food... Coatings, Films and Related Substances § 172.250 Petroleum naphtha. Petroleum naphtha may be safely used in..., essentially paraffinic and naphthenic in nature obtained from petroleum, (b) The additive is refined to...

  1. 21 CFR 172.886 - Petroleum wax.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 3 2013-04-01 2013-04-01 false Petroleum wax. 172.886 Section 172.886 Food and... Multipurpose Additives § 172.886 Petroleum wax. Petroleum wax may be safely used in or on food, in accordance with the following conditions: (a) Petroleum wax is a mixture of solid hydrocarbons, paraffinic...

  2. Mitotic chromosome structure

    SciTech Connect

    Heermann, Dieter W.

    2012-07-15

    Mounting evidence is compiling linking the physical organizational structure of chromosomes and the nuclear structure to biological function. At the base of the physical organizational structure of both is the concept of loop formation. This implies that physical proximity within chromosomes is provided for otherwise distal genomic regions and thus hierarchically organizing the chromosomes. Together with entropy many experimental observations can be explained with these two concepts. Among the observations that can be explained are the measured physical extent of the chromosomes, their shape, mechanical behavior, the segregation into territories (chromosomal and territories within chromosomes), the results from chromosome conformation capture experiments, as well as linking gene expression to structural organization.

  3. Molecular characterization of vanadyl and nickel non-porphyrin compounds in heavy crude petroleums and residua

    SciTech Connect

    Reynolds, J.G.; Biggs, W.R.; Fetzer, J.C.; Gallegos, E.J.; Fish, R.H.; Komlenic, J.J.; Wines, B.K.

    1984-01-01

    The molecular characterization of vanadium and nickel compounds in heavy crude petroleums has been the subject of current research. Arabian Heavy, Maya, Boscan, Cerro Negro, Prudhoe Bay, Wilmington Beta, Kern River, and Morichal crude petroleums have been examined. Fractions from D 2007 separations, porphyrin extractions, and solvent selective extraction with reversed phase column separations of these petroleums have been studied thoroughly by EPR. Important structural aspects are emerging from the presented data: (1) There are non-porphyrin metal complexes in the crude petroleums. (2) They appear to be smaller molecules with MW < 400 which are liberated when the tertiary structure of the large asphaltics is denatured. (3) The first coordination spheres of this class of compounds are possibly 4N, N O 2S, and 4S. 10 references, 3 figures, 1 table.

  4. Toxic effects of various solvents against Rhipicephalus (Boophilus) annulatus.

    PubMed

    Ravindran, Reghu; Juliet, Sanis; Kumar, K G Ajith; Sunil, A R; Nair, Suresh N; Amithamol, K K; Rawat, Ajay Kumar Singh; Ghosh, Srikanta

    2011-09-01

    The current need of identification of a new acaricidal agent which is acceptable to public as environmentally safe is a daring task. Use of herbal acaricides is such an alternative. Most of the herbal extracts or fractions are dissolved in polar or non-polar solvents or detergents before tested for acaricidal activity. The solvent or detergent to be used for dissolving the herbal extract should be of little acaricidal activity. In the present study, experimentations were carried out on adult engorged female ticks to detect the toxicity of different solvents, viz. hexane, petroleum ether, n-butanol, isopropyl alcohol, chloroform, glycerol, ethyl acetate, acetone, ethanol, and methanol. The study revealed that methanol was the least toxic solvent against Rhipicephalus (Boophilus) annulatus.

  5. PETROLEUM PRODUCTS, PROPERTIES, QUALITY, APPLICATION,

    DTIC Science & Technology

    The document contains Chapters 7-10 of a Russian handbook of petroleum products. These chapters discuss drive-train oils, lubricating oils for aviation gas-turbine engines, industrial oils, and insulating oils.

  6. B Chromosomes - A Matter of Chromosome Drive.

    PubMed

    Houben, Andreas

    2017-01-01

    B chromosomes are supernumerary chromosomes which are often preferentially inherited, deviating from usual Mendelian segregation. The balance between the so-called chromosome drive and the negative effects that the presence of Bs applies on the fitness of their host determines the frequency of Bs in a particular population. Drive is the key for understanding most B chromosomes. Drive occurs in many ways at pre-meiotic, meiotic or post-meiotic divisions, but the molecular mechanism remains unclear. The cellular mechanism of drive is reviewed based on the findings obtained for the B chromosomes of rye, maize and other species. How novel analytical tools will expand our ability to uncover the biology of B chromosome drive is discussed.

  7. International petroleum statistics report

    SciTech Connect

    1996-05-01

    The International Petroleum Statistics Report presents data on international oil production, demand, imports, exports, and stocks. The report has four sections. Section 1 contains time series data on world oil production, and on oil demand and stocks in the Organization for Economic Cooperation and Development (OECD). This section contains annual data beginning in 1985, and monthly data for the most recent two years. Section 2 presents an oil supply/demand balance for the world. This balance is presented in quarterly intervals for the most recent two years. Section 3 presents data on oil imports by OECD countries. This section contains annual data for the most recent year, quarterly data for the most recent two quarters, and monthly data for the most recent twelve months. Section 4 presents annual time series data on world oil production and oil stocks, demand, and trade in OECD countries. World oil production and OECD demand data are for the years 1970 through 1995; OECD stocks from 1973 through 1995; and OECD trade from 1084 through 1994.

  8. International petroleum statistics report

    SciTech Connect

    1996-10-01

    The International Petroleum Statistics Report presents data on international oil production, demand, imports, and stocks. The report has four sections. Section 1 contains time series data on world oil production, and on oil demand and stocks in the Organization for Economic Cooperation and Development (OECD). This section contains annual data beginning in 1985, and monthly data for the most recent two years. Section 2 presents an oil supply/demand balance for the world. This balance is presented in quarterly intervals for the most recent two years. Section 3 presents data on oil imports by OECD countries. This section contains annual data for the most recent year, quarterly data for the most recent two quarters, and monthly data for the most recent twelve months. Section 4 presents annual time series data on world oil production and oil stocks, demand, and trade in OECD countries. Word oil production and OECD demand data are for the years 1970 through 1995; OECD stocks from 1973 through 1995; and OECD trade from 1985 through 1995.

  9. International petroleum statistics report

    SciTech Connect

    1995-11-01

    The International Petroleum Statistics Report presents data on international oil production, demand, imports, exports, and stocks. The report has four sections. Section 1 contains time series data on world oil production, and on oil demand and stocks in the Organization for Economic Cooperation and Development (OECD). This section contains annual data beginning in 1985, and monthly data for the most recent two years. Section 2 presents an oil supply/demand balance for the world. This balance is presented in quarterly intervals for the most recent two years. Section 3 presents data on oil imports by OECD countries. This section contains annual data for the most recent year, quarterly data for the most recent two quarters, and monthly data for the most recent twelve months. Section 4 presents annual time series data on world oil production and oil stocks, demand, and trade in OECD countries. World oil production and OECD demand data are for the years 1970 through 1994; OECD stocks from 1973 through 1994; and OECD trade from 1984 through 1994.

  10. International petroleum statistics report

    SciTech Connect

    1995-07-27

    The International Petroleum Statistics Report presents data on international oil production, demand, imports, and exports, and stocks. The report has four sections. Section 1 contains time series data on world oil production, and on oil demand and stocks in the Organization for Economic Cooperation and Development (OECD). This section contains annual data beginning in 1985, and monthly data for the most recent two years. Section 2 presents an oil supply/demand balance for the world. This balance is presented in quarterly intervals for the most recent two years. Section 3 presents data on oil imports by OECD countries. This section contains annual data for the most recent year, quarterly data for the most recent two quarters, and monthly data for the most recent twelve months. Section 4 presents annual time series data on world oil production and oil stocks, demand, and trade in OECD countries. World oil production and OECD demand data are for the years 1970 through 1994; OECD stocks from 1973 through 1994; and OECD trade from 1984 through 1994.

  11. International petroleum statistics report

    SciTech Connect

    1997-07-01

    The International Petroleum Statistics Report is a monthly publication that provides current international data. The report presents data on international oil production, demand, imports, and stocks. The report has four sections. Section 1 contains time series data on world oil production, and on oil demand and stocks in the Organization for Economic Cooperation and Development (OECD). This section contains annual data beginning in 1985, and monthly data for the most recent two years. Section 2 presents an oil supply/demand balance for the world. This balance is presented in quarterly intervals for the most recent two years. Section 3 presents data on oil imports by OECD countries. This section contains annual data for the most recent year, quarterly data for the most recent two quarters, and monthly data for the most recent 12 months. Section 4 presents annual time series data on world oil production and oil stocks, demand, and trade in OECD countries. World oil production and OECD demand data are for the years 1970 through 1996; OECD stocks from 1973 through 1996; and OECD trade from 1986 through 1996.

  12. The Precarious Prokaryotic Chromosome

    PubMed Central

    2014-01-01

    Evolutionary selection for optimal genome preservation, replication, and expression should yield similar chromosome organizations in any type of cells. And yet, the chromosome organization is surprisingly different between eukaryotes and prokaryotes. The nuclear versus cytoplasmic accommodation of genetic material accounts for the distinct eukaryotic and prokaryotic modes of genome evolution, but it falls short of explaining the differences in the chromosome organization. I propose that the two distinct ways to organize chromosomes are driven by the differences between the global-consecutive chromosome cycle of eukaryotes and the local-concurrent chromosome cycle of prokaryotes. Specifically, progressive chromosome segregation in prokaryotes demands a single duplicon per chromosome, while other “precarious” features of the prokaryotic chromosomes can be viewed as compensations for this severe restriction. PMID:24633873

  13. B-chromosome evolution.

    PubMed Central

    Camacho, J P; Sharbel, T F; Beukeboom, L W

    2000-01-01

    B chromosomes are extra chromosomes to the standard complement that occur in many organisms. They can originate in a number of ways including derivation from autosomes and sex chromosomes in intra- and interspecies crosses. Their subsequent molecular evolution resembles that of univalent sex chromosomes, which involves gene silencing, heterochromatinization and the accumulation of repetitive DNA and transposons. B-chromosome frequencies in populations result from a balance between their transmission rates and their effects on host fitness. Their long-term evolution is considered to be the outcome of selection on the host genome to eliminate B chromosomes or suppress their effects and on the B chromosome's ability to escape through the generation of new variants. Because B chromosomes interact with the standard chromosomes, they can play an important role in genome evolution and may be useful for studying molecular evolutionary processes. PMID:10724453

  14. Supernumerary small ring chromosome.

    PubMed Central

    Kaffe, S; Kim, H J; Hsu, L Y; Brill, C B; Hirschhorn, K

    1977-01-01

    A supernumerary small ring chromosome was found in 30% of cultured peripheral leucocytes and 50% of skin fibroblasts in a 6-year-old boy with mild mental retardation and midline cleft palate. The extra chromosome appeared to carry a densely staining region on Giemsa banding. The banding patterns of the remaining 46 chromosomes were normal. C banding indicated that the ring chromosome contained mainly centromeric constitutive heterochromatin. Chromosome analysis of both parents showed normal karyotypes by both conventional and banding techniques; thus the origin of the ring chromosome could not be determined. Images PMID:604496

  15. Petroleum biodegradation in marine environments.

    PubMed

    Harayama, S; Kishira, H; Kasai, Y; Shutsubo, K

    1999-08-01

    Petroleum-based products are the major source of energy for industry and daily life. Petroleum is also the raw material for many chemical products such as plastics, paints, and cosmetics. The transport of petroleum across the world is frequent, and the amounts of petroleum stocks in developed countries are enormous. Consequently, the potential for oil spills is significant, and research on the fate of petroleum in a marine environment is important to evaluate the environmental threat of oil spills, and to develop biotechnology to cope with them. Crude oil is constituted from thousands of components which are separated into saturates, aromatics, resins and asphaltenes. Upon discharge into the sea, crude oil is subjected to weathering, the process caused by the combined effects of physical, chemical and biological modification. Saturates, especially those of smaller molecular weight, are readily biodegraded in marine environments. Aromatics with one, two or three aromatic rings are also efficiently biodegraded; however, those with four or more aromatic ring are quite resistant to biodegradation. The asphaltene and resin fractions contain higher molecular weight compounds whose chemical structures have not yet been resolved. The biodegradability of these compounds is not yet known. It is known that the concentrations of available nitrogen and phosphorus in seawater limit the growth and activities of hydrocarbon-degrading microorganisms in a marine environment. In other words, the addition of nitrogen and phosphorus fertilizers to an oil-contaminated marine environment can stimulate the biodegradation of spilled oil. This notion was confirmed in the large-scale operation for bioremediation after the oil spill from the Exxon Valdez in Alaska. Many microorganisms capable of degrading petroleum components have been isolated. However, few of them seem to be important for petroleum biodegradation in natural environments. One group of bacteria belonging to the genus

  16. SOLVENT EXTRACTION OF NEPTUNIUM

    DOEpatents

    Butler, J.P.

    1958-08-12

    A process is described for the recovery of neptuniunn from dissolver solutions by solvent extraction. The neptunium containing solution should be about 5N, in nitric acid.and about 0.1 M in ferrous ion. The organic extracting agent is tributyl phosphate, and the neptuniunn is recovered from the organic solvent phase by washing with water.

  17. Solvent-free synthesis

    EPA Science Inventory

    This chapter gives a brief introduction about solvent-free reactions whose importance can be gauged by the increasing number of publications every year during the last decade. The mechanistic aspects of the reactions under solvent-free conditions have been highlighted. Our observ...

  18. Alternative Green Solvents Project

    NASA Technical Reports Server (NTRS)

    Maloney, Phillip R.

    2012-01-01

    Necessary for safe and proper functioning of equipment. Mainly halogenated solvents. Tetrachloride, Trichloroethylene (TCE), CFC-113. No longer used due to regulatory/safety concerns. Precision Cleaning at KSC: Small % of total parts. Used for liquid oxygen (LOX) systems. Dual solvent process. Vertrel MCA (decafluoropentane (DFP) and trons-dichloroethylene) HFE-7100. DFP has long term environmental concerns. Project Goals: a) Identify potential replacements. b) 22 wet chemical processes. c) 3 alternative processes. d) Develop test procedures. e) Contamination and cleaning. f) Analysis. g) Use results to recommend alternative processes. Conclusions: a) No alternative matched Vertrel in this study. b) No clear second place solvent. c) Hydrocarbons- easy; Fluorinated greases- difficult. d) Fluorinated component may be needed in replacement solvent. e) Process may need to make up for shortcoming of the solvent. f) Plasma and SCC02 warrant further testing.

  19. Ring chromosome 4.

    PubMed Central

    McDermott, A; Voyce, M A; Romain, D

    1977-01-01

    A mentally and physically retarded boy with a 46,XY,ring (4) (p16q35) chromosome complement is described. Chromosome banding showed that the amount of chromosome material deleted from the ring chromosome 4 was minimal, apparently no more than the telomeres. Chromosomal aberrations appear to be restricted to the production of double-sized dicentric rings, and aneuploidy. The mosiacism resulting from the behavioural peculiarities of ring chromosomes is described as dynamic mosaicism. It is suggested that the clinical features associated with this ring chromosome are more likely to be the result of the effects of a diploid/monosomy 4/polysomy 4 mosaicism than to the deficiency of the telomeric regions of the chromosome. Images PMID:881718

  20. Chromosome Disorder Outreach

    MedlinePlus

    ... BLOG Join Us Donate You are not alone. Chromosome Disorder Outreach, Inc. is a non-profit organization, ... Support For all those diagnosed with any rare chromosome disorder. Since 1992, CDO has supported the parents ...

  1. Human X chromosome

    SciTech Connect

    1993-12-31

    Chapter 21, describes in detail the human X chromosome. X chromatin (or Barr body) formation, inactivation and reactivation of the X chromosome, X;Y translocations, and sex reversal are discussed. 30 refs., 3 figs.

  2. Abnormal human sex chromosome constitutions

    SciTech Connect

    1993-12-31

    Chapter 22, discusses abnormal human sex chromosome constitution. Aneuploidy of X chromosomes with a female phenotype, sex chromosome aneuploidy with a male phenotype, and various abnormalities in X chromosome behavior are described. 31 refs., 2 figs.

  3. Chromosomal Disorders and Autism.

    ERIC Educational Resources Information Center

    Gillberg, Christopher

    1998-01-01

    This paper reviews the literature on chromosomal aberrations in autism, especially possible gene markers. It notes that Chromosome 15 and numerical and structural abnormalities of the sex chromosomes have been most frequently reported as related to the genesis of autism. (Author/DB)

  4. Biological Remediation of Petroleum Contaminants

    NASA Astrophysics Data System (ADS)

    Kuhad, Ramesh Chander; Gupta, Rishi

    Large volumes of hazardous wastes are generated in the form of oily sludges and contaminated soils during crude oil transportation and processing. Although many physical, chemical and biological treatment technologies are available for petroleum contaminants petroleum contaminants in soil, biological methods have been considered the most cost-effective. Practical biological remediation methods typically involve direct use of the microbes naturally occurring in the contaminated environment and/or cultured indigenous or modified microorganisms. Environmental and nutritional factors, including the properties of the soil, the chemical structure of the hydrocarbon(s), oxygen, water, nutrient availability, pH, temperature, and contaminant bioavailability, can significantly affect the rate and the extent of hydrocarbon biodegradation hydrocarbon biodegradation by microorganisms in contaminated soils. This chapter concisely discusses the major aspects of bioremediation of petroleum contaminants.

  5. Petroleum 1996 - issues and trends

    SciTech Connect

    1997-09-01

    Increasingly, users of the Energy Information Administration`s petroleum data and analytical reports have expressed an interest in a recurring report that takes a broad view of the petroleum sector. What is sought is some perspective on the complex interrelationships that comprise an industry and markets accounting for 40 percent of the energy consumed in the United States and ranging from the drilling rig in the oil field to the pump at the local gasoline station. This report comprehensively examines historical trends, and selectively focuses on major issues and the events they represent. It analyzes different dimensions of the industry and related markets in terms of how they relate to a common theme, in this case, the volatility in petroleum markets.

  6. Inhibition of retrogressive reactions in coal/petroleum co-processing. Final technical report

    SciTech Connect

    Schobert, H.H.; Tomic, J.

    1993-05-25

    The objective of this study was to examine the processes in coal/petroleum coprocessing systems which led to coke formation. Specifically, the interactions between the petroleum residue and coal, leading to retrogressive products, were investigated. Five coals were reacted with five model compounds in order to investigate the coal conversions in a variety of solvents and to determine the role of the solvent in promoting or inhibiting coal conversion. The selected model compounds range from paraffinic to fully aromatic and were chosen as representative of types of compounds that are found in petroleum residua. Coprocessing experiments were conducted using the five coals and three petroleum residua. The effect of temperature on coal conversions was crucial. The coal conversions at 350 and 400{degree}C seem to be governed by the nature of the coal and to a lesser extent by the petroleum residua. Negative coal conversions were observed above 400{degree}C indicating that retrogressive processes had occurred. At temperatures higher than 400{degree}C, the petroleum residua undergo physical and chemical transformations and the influence of the petroleum residua on coal conversions is significant. The structural features of the residues indicated that the residues were predominately coal-derived. An overall increase in aromaticity was observed with increasing temperature which was also accompanied by loss of oxygen functional groups. The retrogressive reactions with non-caking coals involve carbonyl and carboxyl group leading to a final solid characterized by a cross-linked structure. In the case of caking coal, these reactions are governed by loss of aromatic oxygen groups and loss of alkyl groups.

  7. The human Y chromosome.

    PubMed Central

    Goodfellow, P; Darling, S; Wolfe, J

    1985-01-01

    Despite its central role in sex determination, genetic analysis of the Y chromosome has been slow. This poor progress has been due to the paucity of available genetic markers. Whereas the X chromosome is known to include at least 100 functional genetic loci, only three or four loci have been ascribed to the Y chromosome and even the existence of several of these loci is controversial. Other factors limiting genetic analysis are the small size of the Y chromosome, which makes cytogenetic definition difficult, and the absence of extensive recombination. Based on cytogenetic observation and speculation, a working model of the Y chromosome has been proposed. In this classical model the Y chromosome is defined into subregions; an X-Y homologous meiotic pairing region encompassing most of the Y chromosome short arm and, perhaps, including a pseudoautosomal region of sex chromosome exchange; a pericentric region containing the sex determining gene or genes; and a long arm heterochromatic genetically inert region. The classical model has been supported by studies on the MIC2 loci, which encode a cell surface antigen defined by the monoclonal antibody 12E7. The X linked locus MIC2X, which escapes X inactivation, maps to the tip of the X chromosome short arm and the homologous locus MIC2Y maps to the Y chromosome short arm; in both cases, these loci are within the proposed meiotic pairing region. MIC2Y is the first biochemically defined, expressed locus to be found on the human Y chromosome. The proposed simplicity of the classical model has been challenged by recent molecular analysis of the Y chromosome. Using cloned probes, several groups have shown that a major part of the Y chromosome short arm is unlikely to be homologous to the X chromosome short arm. A substantial block of sequences of the short arm are homologous to sequences of the X chromosome long arm but well outside the pairing region. In addition, the short arm contains sequences shared with the Y chromosome

  8. SOLVENT EXTRACTION PROCESS

    DOEpatents

    Jonke, A.A.

    1957-10-01

    In improved solvent extraction process is described for the extraction of metal values from highly dilute aqueous solutions. The process comprises contacting an aqueous solution with an organic substantially water-immiscible solvent, whereby metal values are taken up by a solvent extract phase; scrubbing the solvent extract phase with an aqueous scrubbing solution; separating an aqueous solution from the scrubbed solvent extract phase; and contacting the scrubbed solvent phase with an aqueous medium whereby the extracted metal values are removed from the solvent phase and taken up by said medium to form a strip solution containing said metal values, the aqueous scrubbing solution being a mixture of strip solution and an aqueous solution which contains mineral acids anions and is free of the metal values. The process is particularly effective for purifying uranium, where one starts with impure aqueous uranyl nitrate, extracts with tributyl phosphate dissolved in carbon tetrachloride, scrubs with aqueous nitric acid and employs water to strip the uranium from the scrubbed organic phase.

  9. Petroleum marketing monthly, June 1993

    SciTech Connect

    Not Available

    1993-06-10

    This publication is designed to give information and statistical data about a variety of crude oils and refined petroleum products. The publication provides statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the f.o.b. and landed cost of imported crude oil, and the refiners` acquisition cost of crude oil. Sales data for motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane are presented.

  10. Solvent alternatives guide

    SciTech Connect

    Elion, J.M.; Monroe, K.R.; Hill, E.A.

    1996-06-01

    It is no longer legal to manufacture or import chlorofluorocarbon 113 or methyl chloroform solvents, and companies that currently clean their parts with either material are now required to implement environmentally safe substitutes. To help find alternative methods, Research Triangle Institute`s Surface Cleaning Technology Program has designed a Solvent Alternatives Guide (SAGE), an online tool that enables access to practical information and recommendations for acceptable solvents. Developed in partnership with the US Environmental Protection Agency, SAGE is available free of charge on the Internet`s World Wide Web.

  11. Chromosome instability syndromes

    SciTech Connect

    1993-12-31

    Chapter 11, discusses chromosome instability syndromes. The focus is on the most extensively studied genotypic chromosomal aberrations which include Bloom syndrome, Fanconi anemia, ataxia telangiectasia, and xeroderma pigmentosum. The great interest in these syndromes is out of proportion to their rare occurrence; however, studies of genotypic chromosome breakage have been inspired by the hope of throwing light on chromosome structure and behavior. A table is given which relates chromosomal aberrations in Bloom syndrome which may cause or promote cancer. 34 refs., 3 figs., 1 tab.

  12. Congenital Fibrosarcoma and History of Prenatal Exposure to Petroleum Derivatives

    PubMed Central

    Soldin, Offie P.; López-Hernández, Fernando A.; Trasande, Leonardo; Ferrís-Tortajada, Josep

    2012-01-01

    Congenital fibrosarcoma (CFS) is a rare fibrous tissue malignancy that usually presents in the first few years of life. It is unique among human sarcomas in that it has an excellent prognosis. We describe a temporal clustering of a number of cases of CFS and investigate the possible associated prenatal risk factors. The Pediatric Environmental History, a questionnaire developed in our clinic that is instrumental in determining environmental risk factors for tumor-related disease, was essential in documenting the presence or absence of risk factors considered as human carcinogens. We found a history of exposure to petroleum products in four cases of CFS that occurred at a greater than expected rate in a short time frame–an apparent cancer cluster. We call attention to the possibility that exposure to petroleum products raises the risk of developing CFS. While future studies should focus on systematic investigation of CFS and its underlying mechanisms, this report suggests the need for proactive measures to avoid exposure to solvents and petroleum products during pregnancy. PMID:22945410

  13. Characterization of Petroleum Residue in the Entrada Sandstone, Colorado National Monument

    USGS Publications Warehouse

    Lillis, Paul G.; King, J. David

    2007-01-01

    Introduction As part of the U.S. Geological Survey's (USGS) petroleum resource assessment of the Uinta-Piceance Province, Colorado and Utah, in 2000 (USGS Uinta-Piceance Assessment Team, 2003), some 170 oils, oil stains, and oil seeps were geochemically characterized and divided into genetic types (Lillis and others, 2003). Recognized oil types include Minturn, Phosphoria, Grassy Trail Creek, Mancos, Mesaverde, and Green River. Subsequent to that study, the existence and general locality of petroleum residue in the Middle Jurassic Entrada Sandstone in Colorado National Monument (CNM) was brought to the attention of the authors (Scott and others, 2001). Because the analysis of such non-commercial petroleum deposits commonly yields valuable regional resource-trend information, we collected and characterized the reported CNM petroleum residue and compared the results with identified oil types in the Uinta-Piceance Province. Three samples of Entrada Sandstone with petroleum residue were collected near Little Park Road along the south edge of the CNM in sec.20, T.12S., R.101W. The approximate extent of the petroleum staining was determined by field testing with solvent, and the stains appear to be restricted to the upper part of the 'board beds' unit (informal name, Scott and others, 2001) of the Entrada Sandstone between the two fault traces of the Glade Park fault.

  14. 46 CFR 148.04-15 - Petroleum coke, uncalcined; petroleum coke, uncalcined and calcined (mixture).

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Petroleum coke, uncalcined; petroleum coke, uncalcined and calcined (mixture). 148.04-15 Section 148.04-15 Shipping COAST GUARD, DEPARTMENT OF HOMELAND... Requirements for Certain Material § 148.04-15 Petroleum coke, uncalcined; petroleum coke, uncalcined...

  15. Petroleum supply annual 1995: Volume 1

    SciTech Connect

    1996-05-01

    The {ital Petroleum Supply Annual} contains information on supply and disposition of crude oil and petroleum products. It reflects data collected from the petroleum industry during 1995 through monthly surveys, and it is divided into 2 volumes. This volume contains three sections: summary statistics, detailed statistics, and selected refinery statistics, each with final annual data. (The other volume contains final statistics for each month and replaces data previously published in the {ital Petroleum Supply Monthly}).

  16. The Second Colloquium on Petroleum Engineering Education

    SciTech Connect

    Willhite, G.P.; Forney, R.H.

    1993-11-30

    This paper describes findings from the Second Colloquium on Petroleum engineering Education. The purpose of this colloquium was to provide a forum for petroleum engineering educators and representatives from industry and government to explore critical issues facing petroleum engineering education as we move into the 21st Century. It was expected that the colloquium would identify areas where changes are needed in petroleum engineering education, to best prepare students for careers in the oil and gas industry or other, related industries.

  17. FRACTURED PETROLEUM RESERVOIRS

    SciTech Connect

    Abbas Firoozabadi

    1999-06-11

    different from that of gas displacement processes. The work is of experimental nature and clarifies several misconceptions in the literature. Based on experimental results, it is established that the main reason for high efficiency of solution gas drive from heavy oil reservoirs is due to low gas mobility. Chapter III presents the concept of the alteration of porous media wettability from liquid-wetting to intermediate gas-wetting. The idea is novel and has not been introduced in the petroleum literature before. There are significant implications from such as proposal. The most direct application of intermediate gas wetting is wettability alteration around the wellbore. Such an alteration can significantly improve well deliverability in gas condensate reservoirs where gas well deliverability decreases below dewpoint pressure. Part I of Chapter III studies the effect of gravity, viscous forces, interfacial tension, and wettability on the critical condensate saturation and relative permeability of gas condensate systems. A simple phenomenological network model is used for this study, The theoretical results reveal that wettability significantly affects both the critical gas saturation and gas relative permeability. Gas relative permeability may increase ten times as contact angle is altered from 0{sup o} (strongly liquid wet) to 85{sup o} (intermediate gas-wetting). The results from the theoretical study motivated the experimental investigation described in Part II. In Part II we demonstrate that the wettability of porous media can be altered from liquid-wetting to gas-wetting. This part describes our attempt to find appropriate chemicals for wettability alteration of various substrates including rock matrix. Chapter IV provides a comprehensive treatment of molecular, pressure, and thermal diffusion and convection in porous media Basic theoretical analysis is presented using irreversible thermodynamics.

  18. 31 CFR 561.318 - Petroleum.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 31 Money and Finance:Treasury 3 2014-07-01 2014-07-01 false Petroleum. 561.318 Section 561.318 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE OF FOREIGN... § 561.318 Petroleum. The term petroleum (also known as crude oil) means a mixture of hydrocarbons...

  19. 78 FR 40131 - National Petroleum Council

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-07-03

    ... National Petroleum Council AGENCY: Office of Fossil Energy, Department of Energy. ACTION: Notice of Open Meeting. SUMMARY: This notice announces a meeting of the National Petroleum Council. The Federal Advisory... Business Properly Brought Before the National Petroleum Council Adjournment Public Participation:...

  20. 77 FR 42297 - National Petroleum Council

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-07-18

    ... National Petroleum Council AGENCY: Department of Energy, Office of Fossil Energy. ACTION: Notice of open meeting. ] SUMMARY: This notice announces a meeting of the National Petroleum Council. The Federal... Brought Before the National Petroleum Council Adjournment Public Participation: The meeting is open to...

  1. 31 CFR 561.318 - Petroleum.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 31 Money and Finance:Treasury 3 2013-07-01 2013-07-01 false Petroleum. 561.318 Section 561.318 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE OF FOREIGN... § 561.318 Petroleum. The term petroleum (also known as crude oil) means a mixture of hydrocarbons...

  2. 76 FR 53889 - National Petroleum Council

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-08-30

    ... National Petroleum Council AGENCY: Department of Energy, Office of Fossil Energy. ACTION: Notice of Open Meeting. SUMMARY: This notice announces a meeting of the National Petroleum Council. The Federal Advisory... National, Petroleum Council, Adjournment. Public Participation: The meeting is open to the public....

  3. Unit: Petroleum, Inspection Pack, National Trial Print.

    ERIC Educational Resources Information Center

    Australian Science Education Project, Toorak, Victoria.

    This is a National Trial Print of a unit on petroleum developed for the Australian Science Education Project. The package contains the teacher's edition of the written material and a script for a film entitled "The Extraordinary Experience of Nicholas Nodwell" emphasizing the uses of petroleum and petroleum products in daily life and…

  4. 21 CFR 172.886 - Petroleum wax.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 3 2014-04-01 2014-04-01 false Petroleum wax. 172.886 Section 172.886 Food and... PERMITTED FOR DIRECT ADDITION TO FOOD FOR HUMAN CONSUMPTION Multipurpose Additives § 172.886 Petroleum wax. Petroleum wax may be safely used in or on food, in accordance with the following conditions: (a)...

  5. Vegetable oils as a petroleum replacement

    Technology Transfer Automated Retrieval System (TEKTRAN)

    The current dependence of the world economy on petroleum cannot be sustained in the long run. Petroleum is expected to be depleted in the foreseeable future. In addition, the use of petroleum causes carbon dioxide emissions leading to global warming. Renewable sources need to be explored. One of the...

  6. CHLORINATED SOLVENT PLUME CONTROL

    EPA Science Inventory

    This lecture will cover recent success in controlling and assessing the treatment of shallow ground water plumes of chlorinated solvents, other halogenated organic compounds, and methyl tert-butyl ether (MTBE).

  7. Continuous countercurrent membrane column for the separation of solute/solvent and solvent/solvent systems

    DOEpatents

    Nerad, Bruce A.; Krantz, William B.

    1988-01-01

    A reverse osmosis membrane process or hybrid membrane - complementary separator process for producing enriched product or waste streams from concentrated and dilute feed streams for both solvent/solvent and solute/solvent systems is described.

  8. Strategic petroleum reserve annual report

    SciTech Connect

    1996-02-15

    Section 165 of the Energy Policy and Conservation Act (Public Law 94- 163), as amended, requires the Secretary of Energy to submit annual reports to the President and the Congress on activities of the Strategic Petroleum Reserve (SPR). This report describes activities for the year ending December 31, 1995.

  9. PETROLEUM BIOREFINING FOR POLLUTION PREVENTION

    SciTech Connect

    John J. Kilbane II

    2002-03-01

    The objective of this project was to isolate and characterize thermophilic bacterial cultures that can be used for the selective removal of nitrogen, sulfur, and/or metals in the biorefining of petroleum. The project was completed on schedule and no major difficulties were encountered. Significant progress was made on multiple topics relevant to the development of a petroleum biorefining process capable of operating at thermophilic temperatures. New cultures capable of selectively cleaving C-N or C-S bonds in molecules relevant to petroleum were obtained, and the genes encoding the enzymes for these unique biochemical reactions were cloned and sequenced. Genetic tools were developed that enable the use of Thermus thermophilus as a host to express any gene of interest, and information was obtained regarding the optimum conditions for the growth of T. thermophilus. The development of a practical biorefining process still requires further research and the future research needs identified in this project include the development of new enzymes and pathways for the selective cleavage of C-N or C-S bonds that have higher specific activities, increased substrate range, and are capable of functioning at thermophilic temperatures. Additionally, there is a need for process engineering research to determine the maximum yield of biomass and cloned gene products that can be obtained in fed-batch cultures using T. thermophilus, and to determine the best configuration for a process employing biocatalysts to treat petroleum.

  10. Petroleum geology of marine evaporites

    SciTech Connect

    Billo, S.M. )

    1994-08-01

    The conditions necessary for evaporite deposition are also important with respect to genesis of source beds for petroleum. In a restricted basin marked by large-scale salt successions, it is presumed that the basin proper is separated from the open sea either by structural or physiographic barriers. These barriers may elevate the effective wave base so that much of the basin is in the stagnant zone or in reducing environment, where sediments rich in organic matter may be deposited. Such shallow barriers increase the conditions favorable for the generation of petroleum. Since marine evaporitic basins are not ideally closed systems, but are subject to influxes and perhaps refluxes of sea water or brine, much petroleum associated with evaporites is generated from dissolved and particulate organic matter swept from the normal marine into the evaporitic environments. Only carbonates precipitate in the mesosaline part (4-12% salinity) of such evaporitic environments. They are of great significance in source rock origin. The huge reserves of petroleum in the Mesozoic of the Middle East, and many other areas including the Michigan, Paradox, and Delaware basins, owe their origin to the thick sequences of carbonates and evaporites of the mesosaline environments. Repeated cycles of oil and gas formation in the stratigraphic record are related to tectonic, climatic, or eustatic events or both, and to increasing sedimentary overburden.

  11. Coke from coal and petroleum

    DOEpatents

    Wynne, Jr., Francis E.; Lopez, Jaime; Zaborowsky, Edward J.

    1981-01-01

    A carbonaceous coke is manufactured by the delayed coking of a slurry mixture of from about 10 to about 30 weight percent of caking or non-caking coal and the remainder a petroleum resid blended at below 50.degree. C.

  12. SOLVENT EXTRACTION OF RUTHENIUM

    DOEpatents

    Hyman, H.H.; Leader, G.R.

    1959-07-14

    The separation of rathenium from aqueous solutions by solvent extraction is described. According to the invention, a nitrite selected from the group consisting of alkali nitrite and alkaline earth nitrite in an equimolecular quantity with regard to the quantity of rathenium present is added to an aqueous solution containing ruthenium tetrantrate to form a ruthenium complex. Adding an organic solvent such as ethyl ether to the resulting mixture selectively extracts the rathenium complex.

  13. Supercritical solvent coal extraction

    NASA Technical Reports Server (NTRS)

    Compton, L. E. (Inventor)

    1984-01-01

    Yields of soluble organic extract are increased up to about 50% by the supercritical extraction of particulate coal at a temperature below the polymerization temperature for coal extract fragments (450 C.) and a pressure from 500 psig to 5,000 psig by the conjoint use of a solvent mixture containing a low volatility, high critical temperature coal dissolution catalyst such as phenanthrene and a high volatility, low critical temperature solvent such as toluene.

  14. Recent Advances in Petroleum Microbiology

    PubMed Central

    Van Hamme, Jonathan D.; Singh, Ajay; Ward, Owen P.

    2003-01-01

    Recent advances in molecular biology have extended our understanding of the metabolic processes related to microbial transformation of petroleum hydrocarbons. The physiological responses of microorganisms to the presence of hydrocarbons, including cell surface alterations and adaptive mechanisms for uptake and efflux of these substrates, have been characterized. New molecular techniques have enhanced our ability to investigate the dynamics of microbial communities in petroleum-impacted ecosystems. By establishing conditions which maximize rates and extents of microbial growth, hydrocarbon access, and transformation, highly accelerated and bioreactor-based petroleum waste degradation processes have been implemented. Biofilters capable of removing and biodegrading volatile petroleum contaminants in air streams with short substrate-microbe contact times (<60 s) are being used effectively. Microbes are being injected into partially spent petroleum reservoirs to enhance oil recovery. However, these microbial processes have not exhibited consistent and effective performance, primarily because of our inability to control conditions in the subsurface environment. Microbes may be exploited to break stable oilfield emulsions to produce pipeline quality oil. There is interest in replacing physical oil desulfurization processes with biodesulfurization methods through promotion of selective sulfur removal without degradation of associated carbon moieties. However, since microbes require an environment containing some water, a two-phase oil-water system must be established to optimize contact between the microbes and the hydrocarbon, and such an emulsion is not easily created with viscous crude oil. This challenge may be circumvented by application of the technology to more refined gasoline and diesel substrates, where aqueous-hydrocarbon emulsions are more easily generated. Molecular approaches are being used to broaden the substrate specificity and increase the rates and

  15. Cleaning without chlorinated solvents

    SciTech Connect

    Thompson, L.M.; Simandl, R.F.

    1994-12-31

    Because of health and environmental concerns, many regulations have been passed in recent years regarding the use of chlorinated solvents. The Oak Ridge Y-12 Plant has had an active program to find alternatives for these solvents used in cleaning applications for the past 7 years. During this time frame, the quantity of solvents purchased has been reduced by 92%. The program has been a twofold effort. Vapor degreasers used in batch cleaning-operations have been replaced by ultrasonic cleaning with aqueous detergent, and other organic solvents have been identified for use in hand-wiping or specialty operations. In order to qualify these alternatives for use, experimentation was conducted on cleaning ability as well as effects on subsequent operations such as welding, painting and bonding. Cleaning ability was determined using techniques such as X-ray photoelectron spectroscopy (XPS) and Fourier Transform Infrared Spectroscopy (FTIR) which are capable of examining monolayer levels of contamination on a surface. Solvents have been identified for removal of rust preventative oils, lapping oils, machining coolants, lubricants, greases, and mold releases. Solvents have also been evaluated for cleaning urethane foam spray guns, swelling of urethanes and swelling of epoxies.

  16. Cleaning without chlorinated solvents

    NASA Technical Reports Server (NTRS)

    Thompson, L. M.; Simandl, R. F.

    1995-01-01

    Because of health and environmental concerns, many regulations have been passed in recent years regarding the use of chlorinated solvents. The Oak Ridge Y-12 Plant has had an active program to find alternatives for these solvents used in cleaning applications for the past 7 years. During this time frame, the quantity of solvents purchased has been reduced by 92 percent. The program has been a twofold effort. Vapor degreasers used in batch cleaning operations have been replaced by ultrasonic cleaning with aqueous detergent, and other organic solvents have been identified for use in hand-wiping or specialty operations. In order to qualify these alternatives for use, experimentation was conducted on cleaning ability as well as effects on subsequent operations such as welding, painting, and bonding. Cleaning ability was determined using techniques such as x-ray photoelectron spectroscopy (XPS) and Fourier transform infrared spectroscopy (FTIR) which are capable of examining monolayer levels of contamination on a surface. Solvents have been identified for removal of rust preventative oils, lapping oils, machining coolants, lubricants, greases, and mold releases. Solvents have also been evaluated for cleaning urethane foam spray guns, swelling of urethanes, and swelling of epoxies.

  17. 31 CFR 576.206 - Protection granted to the Development Fund for Iraq, Iraqi Petroleum and Petroleum Products, and...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... Fund for Iraq, Iraqi Petroleum and Petroleum Products, and the Central Bank of Iraq. 576.206 Section... Prohibitions § 576.206 Protection granted to the Development Fund for Iraq, Iraqi Petroleum and Petroleum... petroleum and petroleum products, and interests therein, but only until title passes to the...

  18. 31 CFR 542.209 - Prohibited transactions or dealings in or related to petroleum or petroleum products of Syrian...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... or related to petroleum or petroleum products of Syrian origin. 542.209 Section 542.209 Money and... dealings in or related to petroleum or petroleum products of Syrian origin. Except as otherwise authorized... petroleum or petroleum products of Syrian origin is prohibited....

  19. 31 CFR 542.529 - Policy on activities related to petroleum and petroleum products of Syrian origin for the benefit...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... petroleum and petroleum products of Syrian origin for the benefit of the National Coalition of Syrian... activities related to petroleum and petroleum products of Syrian origin for the benefit of the National... the purchase, trade, export, import, or production of petroleum or petroleum products of Syrian...

  20. 31 CFR 576.206 - Protection granted to the Development Fund for Iraq, Iraqi Petroleum and Petroleum Products, and...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... Fund for Iraq, Iraqi Petroleum and Petroleum Products, and the Central Bank of Iraq. 576.206 Section... Prohibitions § 576.206 Protection granted to the Development Fund for Iraq, Iraqi Petroleum and Petroleum... petroleum and petroleum products, and interests therein, but only until title passes to the...

  1. 31 CFR 576.206 - Protection granted to the Development Fund for Iraq, Iraqi Petroleum and Petroleum Products, and...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... Fund for Iraq, Iraqi Petroleum and Petroleum Products, and the Central Bank of Iraq. 576.206 Section... Prohibitions § 576.206 Protection granted to the Development Fund for Iraq, Iraqi Petroleum and Petroleum... petroleum and petroleum products, and interests therein, but only until title passes to the...

  2. 31 CFR 576.206 - Protection granted to the Development Fund for Iraq, Iraqi Petroleum and Petroleum Products, and...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... Fund for Iraq, Iraqi Petroleum and Petroleum Products, and the Central Bank of Iraq. 576.206 Section... Prohibitions § 576.206 Protection granted to the Development Fund for Iraq, Iraqi Petroleum and Petroleum... petroleum and petroleum products, and interests therein, but only until title passes to the...

  3. Solvent extraction of Southern US tar sands

    SciTech Connect

    Penney, W.R.

    1990-01-01

    The Department of Chemical Engineering at the University of Arkansas, in association with Diversified Petroleum Recovery, Inc. (DPR) of Little Rock, Arkansas, has been developing a solvent extraction process for the recovery of bitumen from tar sands for the past five years. The unique feature of the process is that the bitumen is recovered from the solvent by contacting with a co-solvent, which causes the bitumen to precipitate. The overall purpose of this project is to study both the technical and economic feasibility of applying this technology for recovery of bitumen from tar sands by (1) investigating the socioeconmic factors which affect (a) plant siting and (b) the market value of recovered bitumen; (2) operating a process demonstration unit at the rate of 1 lb/hr recovered bitumen while producing clean sand and recyclable solvents; and (3) determine the economic conditions which will make a bitumen recovery project economical. DPR has analyzed the historical trends of domestic production, consumption, discoveries and reserves of crude oil. They have started an investigation of the volatility in the price of crude oil and of gasoline prices and of the differential between gasoline and crude oil. DPR continues to analyze the geographical movement and demand for asphalt products. Utah does not appear economically attractive as a site for a bitumen from tar sands asphalt plant. Oklahoma sites are now being studied. This report also contains the quarterly progress report from a University of Nevada study to determine bitumen composition, oxygen uptake rates, and viscosities of Alabama and Utah bitumens. Both reports have been indexed separately for inclusion on the data base.

  4. Basic petroleum geology, 2nd ed. , revised

    SciTech Connect

    Link.

    1990-01-01

    This book contains revised and updated material, including approximately 200 additional illustrations and an extensive glossary of terms. A valuable reference for geology students and petroleum professionals, the text presents fundamental concepts of geology in terms of sedimentary deposition, petroleum occurrence, exploration, and recovery. This book contains information on geologic time, historical geology and stratigraphy; Minerals and rocks; Weathering erosion, and deposition; Marine erosion and deposition; Depositional basins; Lacustrine, desert and glacial environments; Subsurface water and diagenesis; Structural geology; petroleum traps; Petroleum and reservoirs; Geological considerations and engineering practices; Rocks, reservoirs, and recovery techniques; Exploration techniques for petroleum; Bibliography Glossary; Index.

  5. Analysis of plant meiotic chromosomes by chromosome painting.

    PubMed

    Lysak, Martin A; Mandáková, Terezie

    2013-01-01

    Chromosome painting (CP) refers to visualization of large chromosome regions, entire chromosome arms, or entire chromosomes via fluorescence in situ hybridization (FISH). For CP in plants, contigs of chromosome-specific bacterial artificial chromosomes (BAC) from the target species or from a closely related species (comparative chromosome painting, CCP) are typically applied as painting probes. Extended pachytene chromosomes provide the highest resolution of CP in plants. CP enables identification and tracing of particular chromosome regions and/or entire chromosomes throughout all meiotic stages as well as corresponding chromosome territories in premeiotic interphase nuclei. Meiotic pairing and structural chromosome rearrangements (typically inversions and translocations) can be identified by CP. Here, we describe step-by-step protocols of CP and CCP in plant species including chromosome preparation, BAC DNA labeling, and multicolor FISH.

  6. Petroleum Supply Monthly, September 1990. [Contains glossary

    SciTech Connect

    Whited, D.; Jacobus, P.

    1990-11-28

    Data presented in this PSM describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in Primary Supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States. 12 figs., 46 tabs.

  7. Petroleum supply monthly, October 1990. [Contains Glossary

    SciTech Connect

    Not Available

    1990-12-27

    Data presented in this report describes the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in Primary Supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States. 12 figs., 54 tabs.

  8. Petroleum supply monthly, October 1991. [Contains glossary

    SciTech Connect

    Not Available

    1991-10-30

    Data presented in this report describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in Primary Supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importer, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States. Data are divided into two sections (1) the Summary Statistics and (2) the Detailed Statistics 14 figs., 56 tabs.

  9. Alaskan North Slope petroleum systems

    USGS Publications Warehouse

    Magoon, L.B.; Lillis, P.G.; Bird, K.J.; Lampe, C.; Peters, K.E.

    2003-01-01

    Six North Slope petroleum systems are identified, described, and mapped using oil-to-oil and oil-to-source rock correlations, pods of active source rock, and overburden rock packages. To map these systems, we assumed that: a) petroleum source rocks contain 3.2 wt. % organic carbon (TOC); b) immature oil-prone source rocks have hydrogen indices (HI) >300 (mg HC/gm TOC); c) the top and bottom of the petroleum (oil plus gas) window occur at vitrinite reflectance values of 0.6 and 1.0% Ro, respectively; and d) most hydrocarbons are expelled within the petroleum window. The six petroleum systems we have identified and mapped are: a) a southern system involving the Kuna-Lisburne source rock unit that was active during the Late Jurassic and Early Cretaceous; b) two western systems involving source rock in the Kingak-Blankenship, and GRZ-lower Torok source rock units that were active during the Albian; and c) three eastern systems involving the Shublik-Otuk, Hue Shale and Canning source rock units that were active during the Cenozoic. The GRZ-lower Torok in the west is correlative with the Hue Shale to the east. Four overburden rock packages controlled the time of expulsion and gross geometry of migration paths: a) a southern package of Early Cretaceous and older rocks structurally-thickened by early Brooks Range thrusting; b) a western package of Early Cretaceous rocks that filled the western part of the foreland basin; c) an eastern package of Late Cretaceous and Paleogene rocks that filled the eastern part of the foreland basin; and d) an offshore deltaic package of Neogene rocks deposited by the Colville, Canning, and Mackenzie rivers. This petroleum system poster is part of a series of Northern Alaska posters on modeling. The poster in this session by Saltus and Bird present gridded maps for the greater Northern Alaskan onshore and offshore that are used in the 3D modeling poster by Lampe and others. Posters on source rock units are by Keller and Bird as well as

  10. Petroleum geology of Arabian Peninsula

    SciTech Connect

    Billo, S.M.

    1982-05-01

    Petroleum activities in the Arabian Peninsula show new trends in the 1980s. Petroleum exploration is intensified and huge discoveries are anticipated. A giant Jurassic gas field along the coast of the Arabian Gulf discovered recently tops 150 tcf, the largest single reserve ever. Other giant oil fields in the area are undergoing expansion in development and productivity. Today, the Peninsula, with a total area that surpasses one million square miles, produces and exports more oil and gas and has greater reserves than any other area in the world. The excellent reservoir rocks are located in the Jurassic and Cretaceous formations between the Arabian Shield and the Tethyan Seaway. They represent porous and permeable marine cyclical beds sealed by impervious shales and anhydrites. Reservoir sedimentology was affected by 2 orogenies during late Cretaceous and Pliocene time portrayed by the Cratonic area to the southwest and the orthogeosynclinal area to the northeast. The eastern part was little deformed by these movements.

  11. Safe battery solvents

    DOEpatents

    Harrup, Mason K.; Delmastro, Joseph R.; Stewart, Frederick F.; Luther, Thomas A.

    2007-10-23

    An ion transporting solvent maintains very low vapor pressure, contains flame retarding elements, and is nontoxic. The solvent in combination with common battery electrolyte salts can be used to replace the current carbonate electrolyte solution, creating a safer battery. It can also be used in combination with polymer gels or solid polymer electrolytes to produce polymer batteries with enhanced conductivity characteristics. The solvents may comprise a class of cyclic and acyclic low molecular weight phosphazenes compounds, comprising repeating phosphorus and nitrogen units forming a core backbone and ion-carrying pendent groups bound to the phosphorus. In preferred embodiments, the cyclic phosphazene comprises at least 3 phosphorus and nitrogen units, and the pendent groups are polyethers, polythioethers, polyether/polythioethers or any combination thereof, and/or other groups preferably comprising other atoms from Group 6B of the periodic table of elements.

  12. Separation by solvent extraction

    DOEpatents

    Holt, Jr., Charles H.

    1976-04-06

    17. A process for separating fission product values from uranium and plutonium values contained in an aqueous solution, comprising adding an oxidizing agent to said solution to secure uranium and plutonium in their hexavalent state; contacting said aqueous solution with a substantially water-immiscible organic solvent while agitating and maintaining the temperature at from -1.degree. to -2.degree. C. until the major part of the water present is frozen; continuously separating a solid ice phase as it is formed; separating a remaining aqueous liquid phase containing fission product values and a solvent phase containing plutonium and uranium values from each other; melting at least the last obtained part of said ice phase and adding it to said separated liquid phase; and treating the resulting liquid with a new supply of solvent whereby it is practically depleted of uranium and plutonium.

  13. Solvent resistant copolyimide

    NASA Technical Reports Server (NTRS)

    Chang, Alice C. (Inventor); St. Clair, Terry L. (Inventor)

    1995-01-01

    A solvent resistant copolyimide was prepared by reacting 4,4'-oxydiphthalic anhydride with a diaimine blend comprising, based on the total amount of the diamine blend, about 75 to 90 mole percent of 3,4'-oxydianiline and about 10 to 25 mole percent p-phenylene diamine. The solvent resistant copolyimide had a higher glass transition temperature when cured at 350.degree. , 371.degree. and 400.degree. C. than LaRC.TM.-IA. The composite prepared from the copolyimide had similar mechanical properties to LaRC.TM.-IA. Films prepared from the copolyimide were resistant to immediate breakage when exposed to solvents such as dimethylacetamide and chloroform. The adhesive properties of the copolyimide were maintained even after testing at 23.degree., 150.degree., 177.degree. and 204.degree. C.

  14. Halogenated solvent remediation

    DOEpatents

    Sorenson, Jr., Kent S.

    2008-11-11

    Methods for enhancing bioremediation of ground water contaminated with nonaqueous halogenated solvents are disclosed. An illustrative method includes adding an electron donor for microbe-mediated anaerobic reductive dehalogenation of the halogenated solvents, which electron donor enhances mass transfer of the halogenated solvents from residual source areas into the aqueous phase of the ground water. Illustrative electron donors include C.sub.2-C.sub.4 carboxylic acids and hydroxy acids, salts thereof, esters of C.sub.2-C.sub.4 carboxylic acids and hydroxy acids, and mixtures thereof, of which lactic acid, salts of lactic acid--such as sodium lactate, lactate esters, and mixtures thereof are particularly illustrative. The microbes are either indigenous to the ground water, or such microbes can be added to the ground water in addition to the electron donor.

  15. Halogenated solvent remediation

    DOEpatents

    Sorenson, Kent S.

    2004-08-31

    Methods for enhancing bioremediation of ground water contaminated with nonaqueous halogenated solvents are disclosed. A preferred method includes adding a composition to the ground water wherein the composition is an electron donor for microbe-mediated reductive dehalogenation of the halogenated solvents and enhances mass transfer of the halogenated solvents from residual source areas into the aqueous phase of the ground water. Illustrative compositions effective in these methods include surfactants such as C.sub.2 -C.sub.4 carboxylic acids and hydroxy acids, salts thereof, esters of C.sub.2 -C.sub.4 carboxylic acids and hydroxy acids, and mixtures thereof. Especially preferred compositions for use in these methods include lactic acid, salts of lactic acid, such as sodium lactate, lactate esters, and mixtures thereof. The microbes are either indigenous to the ground water, or such microbes can be added to the ground water in addition to the composition.

  16. Petroleum geology of western Antarctica

    SciTech Connect

    Kingston, J. )

    1990-05-01

    Antarctica's geology is mostly obscured by thick, moving ice that covers 95% of the land and continental shelf. Reconnaissance investigations of outcrops, shallow boreholes, and geophysical surveys are limited and peripheral owing to ice coverage. However, it is possible to outline substantial elements of the regional geology. Further insight is gained by comparison to analogous sedimentary provinces, especially provinces once adjoined within the framework of the Gondwana supercontinent until middle Cretaceous. The petroleum potential of Antarctica, as in the case of the other related high-standing Gondwana continental fragments, is in Early Cretaceous rifts associated with the Gondwana breakup and with the Pacific convergence in the west Antarctica back arc. The Pacific-facing western Antarctica includes two structural provinces: (1) the Cretaceous and younger interior rift system on the east side of the Weddell and Ross Sea embayment, which contain aulacogens that form the boundary with East Antarctica and (2) the back-arc and fore-arc basins adjoining the Antarctica Peninsula and extending into Marie Byrd Land and the Bellingshausen Sea which are associated with the eastward convergence of the Pacific plate. The petroleum potential of the rifts may be assessed by analogies with related rifts of Australia, India, and South Africa; assessment of the convergent basins of western Antarctica depends upon analogy with similar basins of South America, New Zealand, and Indonesia. An estimate of the petroleum potential of western Antarctica generally is comparable with oil and gas occurrences (both in overall quantity and in field sizes) in the other Gondwana continental fragments. However, in view of the thict moving ice cover, the remote locale, and severe climate, petroleum production is largely beyond technology at this time and probably is economically unfeasible.

  17. Conversion of heavy petroleum oils

    SciTech Connect

    Farcasiu, M.

    1982-03-02

    Heavy petroleum oils, such as vacuum resids, and heavy fractions of tar sands and shale oil, are partially converted to more volatile hydrocarbons by mixing with light aromatic hydrocarbons and treatment of the mixture with a friedel-crafts catalyst such as aluminum chloride. It is believed that the conversion found is essentially a transalkylation, I.E. The resid undergoes dealkylation with concurrent alkylation of the light aromatic hydrocarbon.

  18. Pennsylvania's contribution to petroleum geology

    SciTech Connect

    Dickey, P.A.

    1989-09-01

    John F. Carll of the Second Geological Survey of Pennsylvania laid the foundations of both petroleum geology and reservoir engineering. J. P. Lesley, director of the Second Survey, had introduced structure contours when he was working in the anthracite fields. He pointed out that the great oil fields of Pennsylvania were in the only part of the state where there were no anticlines. I. C. White, another geologist with the Second Survey, emphasized the anticlinal theory adopted as a method of prospecting until the discovery of the Cushing field in Oklahoma in 1912. George Ashley, state geologist of Pennsylvanian in the 1930s and 1940s, said that after the gas companies had drilled all the anticlines there would still be the synclines. David White in 1915 noticed the relation between the metamorphosis (rank) of coal and the occurrence of oil and gas. This method (vitrinite reflectance) is now widely applied in the evaluation of basins. In the late 1930s, the resurvey of the Pennsylvania oil regions showed that the reservoirs were shoreline sands, probably barrier islands. In the 1950s the AAPG recommended a study of the recent sediments of the Mississippi delta by Scripps Institute of Oceanography. The ability to recognize depositional environments has caused a revolution in petroleum geology, and recently has been recognized by petroleum engineers as the key to reservoir characterization.

  19. Overview of African petroleum systems

    SciTech Connect

    Perrodon, A. )

    1993-07-12

    Bordered by two large, still spreading oceans and subjected to tensional forces for more than 200 million years, continental Africa has now reached its largest surface expression ever. With a total sedimentary area of 15 million sq km distributed in about 80 basins, Africa possesses and produces circa 10% of the world's oil and 7% of the gas. More than 95% of these hydrocarbons are concentrated in seven petroleum provinces, ruled by three great petroleum systems that in turn are tightly controlled and determined by the geodynamic characteristics of the basins. From a stratigraphic standpoint, these three petroleum systems belong to three geological time periods: Silurian, Cretaceous, and Oligo-Miocene. Generally the Silurian system occurs in Saharan sag basins, the Cretaceous-Eocene systems in a continental rift complex of western and equatorial Africa, and the Cenozoic in two deltaic basins. The Upper Paleozoic and Jurassic, so rich in other continents, here play but a very minor part. The paper describes the Silurian system, the Cretaceous-Eocene system, and the Tertiary system.

  20. Dermal uptake of petroleum substances.

    PubMed

    Jakasa, Ivone; Kezic, Sanja; Boogaard, Peter J

    2015-06-01

    Petroleum products are complex substances comprising varying amounts of linear and branched alkanes, alkenes, cycloalkanes, and aromatics which may penetrate the skin at different rates. For proper interpretation of toxic hazard data, understanding their percutaneous absorption is of paramount importance. The extent and significance of dermal absorption of eight petroleum substances, representing different classes of hydrocarbons, was evaluated. Literature data on the steady-state flux and permeability coefficient of these substances were evaluated and compared to those predicted by mathematical models. Reported results spanned over 5-6 orders of magnitude and were largely dependent on experimental conditions in particular on the type of the vehicle used. In general, aromatic hydrocarbons showed higher dermal absorption than more lipophilic aliphatics with similar molecular weight. The results showed high variation and were largely influenced by experimental conditions emphasizing the need of performing the experiments under "in use" scenario. The predictive models overestimated experimental absorption. The overall conclusion is that, based on the observed percutaneous penetration data, dermal exposure to petroleum hydrocarbons, even of aromatics with highest dermal absorption is limited and highly unlikely to be associated with health risks under real use scenarios.

  1. Chromosomal differentiation of cells

    SciTech Connect

    1993-12-31

    Chapter 16, discusses the chromosomal differentiation of cells. The chromosomes of differentiated cells have been much less studies than those of meristematic or germline cells, probably because such cells do not usually divide spontaneously. However, in many cases they can be induced to undergo mitosis. 26 refs., 2 figs.

  2. XYY chromosome anomaly and schizophrenia.

    PubMed

    Rajagopalan, M; MacBeth, R; Varma, S L

    1998-02-07

    Sex chromosome anomalies have been associated with psychoses, and most of the evidence is linked to the presence of an additional X chromosome. We report a patient with XYY chromosome anomaly who developed schizophrenia.

  3. Sexually antagonistic chromosomal cuckoos

    PubMed Central

    Rice, William R.; Gavrilets, Sergey; Friberg, Urban

    2009-01-01

    The two kinds of sex chromosomes in the heterogametic parent are transmitted to offspring with different sexes, causing opposite-sex siblings to be completely unrelated for genes located on these chromosomes. Just as the nest-parasitic cuckoo chick is selected to harm its unrelated nest-mates in order to garner more shared resources, sibling competition causes the sex chromosomes to be selected to harm siblings that do not carry them. Here we quantify and contrast this selection on the X and Y, or Z and W, sex chromosomes. We also develop a hypothesis for how this selection can contribute to the decay of the non-recombining sex chromosome. PMID:19364719

  4. Capturing Chromosome Conformation

    NASA Astrophysics Data System (ADS)

    Dekker, Job; Rippe, Karsten; Dekker, Martijn; Kleckner, Nancy

    2002-02-01

    We describe an approach to detect the frequency of interaction between any two genomic loci. Generation of a matrix of interaction frequencies between sites on the same or different chromosomes reveals their relative spatial disposition and provides information about the physical properties of the chromatin fiber. This methodology can be applied to the spatial organization of entire genomes in organisms from bacteria to human. Using the yeast Saccharomyces cerevisiae, we could confirm known qualitative features of chromosome organization within the nucleus and dynamic changes in that organization during meiosis. We also analyzed yeast chromosome III at the G1 stage of the cell cycle. We found that chromatin is highly flexible throughout. Furthermore, functionally distinct AT- and GC-rich domains were found to exhibit different conformations, and a population-average 3D model of chromosome III could be determined. Chromosome III emerges as a contorted ring.

  5. Molecular-weight distributions of coal and petroleum asphaltenes from laser desorption/ionization experiments

    SciTech Connect

    Ana R. Hortal; Paola Hurtado; Bruno Martinez-Haya; Oliver C. Mullins

    2007-09-15

    Molecular-weight distributions (MWDs) of asphaltenes extracted from coal and petroleum have been measured in laser desorption/ionization (LDI) mass spectrometric experiments. The dried-droplet and solvent-free sample preparation methods are compared. The coal asphaltenes have a relatively narrow MWD (full width 150 amu) with an average molecular weight of 340 amu. The petroleum asphaltenes display a broader MWD (full width 300 amu) and are heavier on average (680 amu). The LDI spectra also provide evidence for the formation of noncovalent clusters of the two types of asphaltenes during the desorption process. Petroleum and coal asphaltenes exhibit aggregation as do large model polycyclic aromatic hydrocarbons (PAHs) with five or more fused rings also included in the study. Smaller PAHs (pyrene) exhibit less aggregation, especially when alkane-chain substituents are incorporated to the molecular structure. This indicates that asphaltenes possess large PAHs and, according to the relatively small molecular weights observed, that there is a preponderance of asphaltene molecules with only a single fused ring system. The coal asphaltenes present a significantly smaller propensity toward aggregation than their crude oil counterparts. This finding, coupled with the fact that (1) alkanes inhibit aggregation in LDI and (2) petroleum asphaltenes possess much more alkane carbon, indicates that coal asphaltenes have smaller PAHs on average than petroleum asphaltenes. This is further corroborated by the stronger ultraviolet absorbance of the coal asphaltenes at wavelengths shorter than 400 nm. 32 refs., 8 figs.

  6. Phospholipid Biosynthesis and Solvent Tolerance in Pseudomonas putida Strains

    DTIC Science & Technology

    1997-07-01

    11. Franklin, T. J., and G. A. Snow. 1989. Resistance to antimicrobial drugs, p. 173–200. In K. J. Barrett-Bee and R. D. Nolan (ed.), Biochemistry of...transforming (8, 20, 35, 44). Most of these organisms do not harbor plasmids, indicating that the resistance factors reside on the chromosome (8, 35...Extrusion pumps similar to those described for antibiotic resistance have also been postulated as having a role in solvent tolerance (21). The 1996 study

  7. ONSITE SOLVENT RECOVERY

    EPA Science Inventory

    This study evaluated the product quality, waste reduction/pollution prevention, and economic aspects of three technologies for onsite solvent recovery. The technologies were (1) atmospheric batch distillation, (2) vacuum heat-pump distillation, and (3) low-emission vapor degreas...

  8. DESIGNING GREENER SOLVENTS

    EPA Science Inventory

    Computer-aided design of chemicals and chemical mixtures provides a powerful tool to help engineers identify cleaner process designs and more-benign alternatives to toxic industrial solvents. Three software programs are discussed: (1) PARIS II (Program for Assisting the Replaceme...

  9. Organic solvent topical report

    SciTech Connect

    Cowley, W.L.

    1998-04-30

    This report is the technical basis for the accident and consequence analyses used in the Hanford Tank Farms Basis for Interim Operation. The report also contains the scientific and engineering information and reference material needed to understand the organic solvent safety issue. This report includes comments received from the Chemical Reactions Subcommittee of the Tank Advisory Panel.

  10. Organic solvent topical report

    SciTech Connect

    COWLEY, W.L.

    1999-05-13

    This report provides the basis for closing the organic solvent safety issue. Sufficient information is presented to conclude that risk posed by an organic solvent fire is within risk evaluation guidelines. This report updates information contained in Analysis of Consequences of Postulated Solvent Fires in Hanford Site Waste Tanks. WHC-SD-WM-CN-032. Rev. 0A (Cowley et al. 1996). However, this document will not replace Cowley et al (1996) as the primary reference for the Basis for Interim Operation (BIO) until the recently submitted BIO amendment (Hanson 1999) is approved by the US Department of Energy. This conclusion depends on the use of controls for preventing vehicle fuel fires and for limiting the use of flame cutting in areas where hot metal can fall on the waste surface.The required controls are given in the Tank Waste Remediation System Technical Safety Requirements (Noorani 1997b). This is a significant change from the conclusions presented in Revision 0 of this report. Revision 0 of this calcnote concluded that some organic solvent fire scenarios exceeded risk evaluation guidelines, even with controls imposed.

  11. 21 CFR 172.884 - Odorless light petroleum hydrocarbons.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 3 2014-04-01 2014-04-01 false Odorless light petroleum hydrocarbons. 172.884... § 172.884 Odorless light petroleum hydrocarbons. Odorless light petroleum hydrocarbons may be safely... liquid hydrocarbons derived from petroleum or synthesized from petroleum gases. The additive is...

  12. 21 CFR 178.3650 - Odorless light petroleum hydrocarbons.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 3 2014-04-01 2014-04-01 false Odorless light petroleum hydrocarbons. 178.3650... Production Aids § 178.3650 Odorless light petroleum hydrocarbons. Odorless light petroleum hydrocarbons may... derived from petroleum or synthesized from petroleum gases. The additive is chiefly...

  13. Solvent-Ion Interactions in Salt Water: A Simple Experiment.

    ERIC Educational Resources Information Center

    Willey, Joan D.

    1984-01-01

    Describes a procedurally quick, simple, and inexpensive experiment which illustrates the magnitude and some effects of solvent-ion interactions in aqueous solutions. Theoretical information, procedures, and examples of temperature, volume and hydration number calculations are provided. (JN)

  14. World petroleum systems with Jurassic source rocks

    SciTech Connect

    Klemme, H.D. )

    1993-11-08

    Fourteen petroleum systems with Upper Jurassic source rocks contain one quarter of the world's discovered oil and gas. Eleven other systems with Lower and Middle Jurassic source rocks presently have a minor but significant amount of discovered oil and gas. The purpose of this article is to review the systems geologically, describe their location in space and time on a continental scale, estimate their relative petroleum system recovery efficiencies, and outline the effect their essential elements and processes have on their petroleum plumbing.

  15. Petroleum resource potential GIS of northern Afghanistan

    USGS Publications Warehouse

    Steinshouer, Douglas W.; Klett, Timothy R.; Ulmishek, Gregory F.; Wandrey, Craig J.; Wahl, Ronald R.; Hill, Ronald J.; Pribil, Michael J.; Pawlewicz, Mark J.; King, J. David; Agena, Warren F.; Taylor, David J.; Amirzada, Abdulla; Selab, Amir Mohammad; Mutteh, Abdul-Salam; Haidari, Ghulam Naqshband; Wardak, Moeengul Gullabudeen

    2006-01-01

    The CD-ROM contains an ESRI ArcReader format GIS project presenting the results of a petroleum resource assessment of Northern Afghanistan, and other data used in the petroleum assessment. Geologic, structural, field, well, political, and other GIS layers covering Afghanistan, Northern Afghanistan and adjacent areas, along with associated geochemical and other data tables pertinent to a petroleum assessment are included. The purpose of this GIS is to provide the basic data layers and tables required to support the petroleum assessment, data for further exploration and development, and an index of known data.

  16. Petroleum geology of the state of Washington

    USGS Publications Warehouse

    Johnson, Samuel Y.; Tennyson, Marilyn E.; Lingley, William S.; Law, Ben E.

    1997-01-01

    This report describes the potential petroleum resources of Washington State as recently summarized in the 1995 U.S. Geological Survey National Assessment of Oil and Gas Resources. Eight conventional petroleum plays, three coal-bed gas plays, and two continuous-type gas plays are defined and characterized. Of these plays, the potential for significant petroleum accumulations appears greatest in the Columbia Plateau region of eastern Washington. Potential accumulations in western Washington are smaller but could have local economic significance. The absence of high-quality petroleum source rocks is probably the most important factor limiting development of large accumulations.

  17. Petroleum supply annual, 1997. Volume 1

    SciTech Connect

    1998-06-01

    The Petroleum Supply Annual (PSA) contains information on the supply and disposition of crude oil and petroleum products. The publication reflects data that were collected from the petroleum industry during 1997 through annual and monthly surveys. The PSA is divided into two volumes. This first volume contains three sections: Summary Statistics, Detailed Statistics, and Refinery Statistics; each with final annual data. The second volume contains final statistics for each month of 1997, and replaces data previously published in the Petroleum Supply Monthly (PSM). The tables in Volumes 1 and 2 are similarly numbered to facilitate comparison between them. 16 figs., 48 tabs.

  18. Petroleum supply annual 1994. Volume 1

    SciTech Connect

    1995-05-22

    The Petroleum Supply Annual (PSA) contains information on the supply and disposition of crude oil and petroleum products. The publication reflects data that were collected from the petroleum industry during 1994 through annual and monthly surveys. The PSA is divided into two volumes. This first volume contains four sections: Summary Statistics, Detailed Statistics, Refinery Capacity, and Oxygenate Capacity each with final annual data. The second volume contains final statistics for each month of 1994, and replaces data previously published in the Petroleum Supply Monthly (PSM). The tables in Volumes 1 and 2 are similarly numbered to facilitate comparison between them. Below is a description of each section in Volume 1 of the PSA.

  19. Petroleum supply annual 1993. Volume 1

    SciTech Connect

    Not Available

    1994-06-01

    The Petroleum Supply Annual (PSA) contains information on the supply and disposition of crude oil and petroleum products. The publication reflects data that were collected from the petroleum industry during 1993 through annual and monthly surveys. The PSA is divided into two volumes. This first volume contains four sections: Summary Statistics, Detailed Statistics, Refinery Capacity, and Oxygenate Capacity each with final annual data. The second volume contains final statistics for each month of 1993, and replaces data previously published in the Petroleum Supply Monthly (PSM). The tables in Volumes 1 and 2 are similarly numbered to facilitate comparison between them. Below is a description of each section in Volume 1 of the PSA.

  20. Strategic Petroleum Reserve annual/quarterly report

    SciTech Connect

    Not Available

    1993-02-16

    During 1992 the Department continued planning activities for the expansion of the Strategic Petroleum Reserve to one billion barrels. A draft Environmental Impact Statement for the five candidate sites was completed in October 1992, and a series of public hearings was held during December 1992. Conceptual design engineering activities, life cycle cost estimates and geotechnical studies to support the technical requirements for an Strategic Petroleum Reserve Plan Amendment were essentially completed in December 1992. At the end of 1992, the Strategic Petroleum Reserve crude oil inventory was 574.7 million barrels and an additional 1.7 million barrels was in transit to the Reserve. During 1992 approximately 6.2 million barrels of crude oil were acquired for the Reserve. A Department of Energy Tiger Team Environmental, Safety and Health (ES&H) Assessment was conducted at the Strategic Petroleum Reserve from March 9 through April 10, 1992. In general, the Tiger Team found that Strategic Petroleum Reserve activities do not pose undue environmental, safety or health risks. The Strategic Petroleum Reserve`s Final Corrective Action Plan, prepared in response to the Tiger Team assessment, was submitted for Department approval in December 1992. On November 18, 1992, the Assistant Secretary for Fossil Energy selected DynMcDennott Petroleum Operations Company to provide management and operating services for the Strategic Petroleum Reserve for a period of 5 years commencing April 1, 1993. DynMcDermott will succeed Boeing Petroleum Services, Inc.

  1. 31 CFR 542.208 - Prohibited importation of petroleum or petroleum products of Syrian origin.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 31 Money and Finance:Treasury 3 2014-07-01 2014-07-01 false Prohibited importation of petroleum or petroleum products of Syrian origin. 542.208 Section 542.208 Money and Finance: Treasury Regulations... SYRIAN SANCTIONS REGULATIONS Prohibitions § 542.208 Prohibited importation of petroleum or...

  2. Sequential cloning of chromosomes

    DOEpatents

    Lacks, Sanford A.

    1995-07-18

    A method for sequential cloning of chromosomal DNA of a target organism is disclosed. A first DNA segment homologous to the chromosomal DNA to be sequentially cloned is isolated. The first segment has a first restriction enzyme site on either side. A first vector product is formed by ligating the homologous segment into a suitably designed vector. The first vector product is circularly integrated into the target organism's chromosomal DNA. The resulting integrated chromosomal DNA segment includes the homologous DNA segment at either end of the integrated vector segment. The integrated chromosomal DNA is cleaved with a second restriction enzyme and ligated to form a vector-containing plasmid, which is replicated in a host organism. The replicated plasmid is then cleaved with the first restriction enzyme. Next, a DNA segment containing the vector and a segment of DNA homologous to a distal portion of the previously isolated DNA segment is isolated. This segment is then ligated to form a plasmid which is replicated within a suitable host. This plasmid is then circularly integrated into the target chromosomal DNA. The chromosomal DNA containing the circularly integrated vector is treated with a third, retrorestriction (class IIS) enzyme. The cleaved DNA is ligated to give a plasmid that is used to transform a host permissive for replication of its vector. The sequential cloning process continues by repeated cycles of circular integration and excision. The excision is carried out alternately with the second and third enzymes.

  3. Sequential cloning of chromosomes

    DOEpatents

    Lacks, S.A.

    1995-07-18

    A method for sequential cloning of chromosomal DNA of a target organism is disclosed. A first DNA segment homologous to the chromosomal DNA to be sequentially cloned is isolated. The first segment has a first restriction enzyme site on either side. A first vector product is formed by ligating the homologous segment into a suitably designed vector. The first vector product is circularly integrated into the target organism`s chromosomal DNA. The resulting integrated chromosomal DNA segment includes the homologous DNA segment at either end of the integrated vector segment. The integrated chromosomal DNA is cleaved with a second restriction enzyme and ligated to form a vector-containing plasmid, which is replicated in a host organism. The replicated plasmid is then cleaved with the first restriction enzyme. Next, a DNA segment containing the vector and a segment of DNA homologous to a distal portion of the previously isolated DNA segment is isolated. This segment is then ligated to form a plasmid which is replicated within a suitable host. This plasmid is then circularly integrated into the target chromosomal DNA. The chromosomal DNA containing the circularly integrated vector is treated with a third, retrorestriction (class IIS) enzyme. The cleaved DNA is ligated to give a plasmid that is used to transform a host permissive for replication of its vector. The sequential cloning process continues by repeated cycles of circular integration and excision. The excision is carried out alternately with the second and third enzymes. 9 figs.

  4. Human chromosome 22.

    PubMed Central

    Kaplan, J C; Aurias, A; Julier, C; Prieur, M; Szajnert, M F

    1987-01-01

    The acrocentric chromosome 22, one of the shortest human chromosomes, carries about 52 000 kb of DNA. The short arm is made up essentially of heterochromatin and, as in other acrocentric chromosomes, it contains ribosomal RNA genes. Ten identified genes have been assigned to the long arm, of which four have already been cloned and documented (the cluster of lambda immunoglobulin genes, myoglobin, the proto-oncogene c-sis, bcr). In addition, about 10 anonymous DNA segments have been cloned from chromosome 22 specific DNA libraries. About a dozen diseases, including at least four different malignancies, are related to an inherited or acquired pathology of chromosome 22. They have been characterised at the phenotypic or chromosome level or both. In chronic myelogenous leukaemia, with the Ph1 chromosome, and Burkitt's lymphoma, with the t(8;22) variant translocation, the molecular pathology is being studied at the DNA level, bridging for the first time the gap between cytogenetics and molecular genetics. PMID:3550088

  5. Application of the Salmonella mutagenicity assay and determination of polycyclic aromatic hydrocarbons in workplaces exposed to petroleum pitch and petroleum coke.

    PubMed

    Monarca, S; Pasquini, R; Sforzolini, G S; Viola, V; Fagioli, F

    1982-02-01

    Workplaces of an Italian carbon electrode factory, exposed to petroleum pitch and petroleum coke, were studied using a coupled chemical and biological approach to evaluate occupational mutagenic/carcinogenic hazards. Analytical procedures for the determination of polycyclic aromatic hydrocarbons (PAH) and Salmonella/microsome mutagenicity tests (with TA98 and TA100 strains) were performed on both industrial ingredients (pitch and coke) and airborne particulate matter of the working environment, after fractionating by sequential Soxhlet extractions with four organic solvents of increasing polarity (benzene, chloroform, methanol and acetone). The results showed: (a) the presence of extraordinarily high PAH (carcinogenic and non-carcinogenic) contents in the benzene extracts of petroleum pitch (3.6 wt% of total PAH) and of airborne particulate samples (up to 0.35 wt% of total PAH), in correlation with very high indirect (after metabolic activation) mutagenic responses of benzene extracts with strain TA98; (b) very high indirect mutagenic responses in the other extracts of the airborne particulate samples (especially with strain TA98); (c) the production during the processing at high temperatures of directly acting mutagens (without metabolic activation) which were absent in the starting materials and their release in the air of workplaces. The comparison of chemical analytical and mutagenicity data has proved to be an interesting approach for better defining the relative health hazards due to occupational exposure to potentially mutagenic/carcinogenic petroleum products.

  6. Sequential cloning of chromosomes

    SciTech Connect

    Lacks, S.A.

    1991-12-31

    A method for sequential cloning of chromosomal DNA and chromosomal DNA cloned by this method are disclosed. The method includes the selection of a target organism having a segment of chromosomal DNA to be sequentially cloned. A first DNA segment, having a first restriction enzyme site on either side. homologous to the chromosomal DNA to be sequentially cloned is isolated. A first vector product is formed by ligating the homologous segment into a suitably designed vector. The first vector product is circularly integrated into the target organism`s chromosomal DNA. The resulting integrated chromosomal DNA segment includes the homologous DNA segment at either end of the integrated vector segment. The integrated chromosomal DNA is cleaved with a second restriction enzyme and ligated to form a vector-containing plasmid, which is replicated in a host organism. The replicated plasmid is then cleaved with the first restriction enzyme. Next, a DNA segment containing the vector and a segment of DNA homologous to a distal portion of the previously isolated DNA segment is isolated. This segment is then ligated to form a plasmid which is replicated within a suitable host. This plasmid is then circularly integrated into the target chromosomal DNA. The chromosomal DNA containing the circularly integrated vector is treated with a third, retrorestriction enzyme. The cleaved DNA is ligated to give a plasmid that is used to transform a host permissive for replication of its vector. The sequential cloning process continues by repeated cycles of circular integration and excision. The excision is carried out alternately with the second and third enzymes.

  7. Characterization of the toxicological hazards of hydrocarbon solvents.

    PubMed

    Mckee, Richard H; Adenuga, M David; Carrillo, Juan-Carlos

    2015-04-01

    Hydrocarbon solvents are liquid hydrocarbon fractions derived from petroleum processing streams, containing only carbon and hydrogen atoms, with carbon numbers ranging from approximately C5-C20 and boiling between approximately 35-370°C. Many of the hydrocarbon solvents have complex and variable compositions with constituents of 4 types, alkanes (normal paraffins, isoparaffins, and cycloparaffins) and aromatics (primarily alkylated one- and two-ring species). Because of the compositional complexity, hydrocarbon solvents are now identified by a nomenclature ("the naming convention") that describes them in terms of physical/chemical properties and compositional elements. Despite the compositional complexity, most hydrocarbon solvent constituents have similar toxicological properties, and the overall toxicological hazards can be characterized in generic terms. To facilitate hazard characterization, the solvents were divided into 9 groups (categories) of substances with similar physical and chemical properties. Hydrocarbon solvents can cause chemical pneumonitis if aspirated into the lung, and those that are volatile can cause acute CNS effects and/or ocular and respiratory irritation at exposure levels exceeding occupational recommendations. Otherwise, there are few toxicologically important effects. The exceptions, n-hexane and naphthalene, have unique toxicological properties, and those solvents containing constituents for which classification is required under the Globally Harmonized System (GHS) are differentiated by the substance names. Toxicological information from studies of representative substances was used to fulfill REACH registration requirements and to satisfy the needs of the OECD High Production Volume (HPV) initiative. As shown in the examples provided, the hazard characterization data can be used for hazard classification and for occupational exposure limit recommendations.

  8. DESIGNING ENVIRONMENTALLY BENIGN SOLVENT SUBSTITUTES

    EPA Science Inventory

    Since the signing of 1987 Montreal Protocol, reducing and eliminating the use of harmful solvents has become an internationally imminent environmental protection mission. Solvent substitution is an effective way to achieve this goal. The Program for Assisting the Replacement of...

  9. Petroleum characterization by perfluorocarbon tracers

    SciTech Connect

    Senum, G.I.; Fajer, R.W. ); Harris, B.R. Jr. ); DeRose, W.E. ); Ottaviani, W.L. )

    1992-02-01

    Perfluorocarbon tracers (PFTs), a class of six compounds, were used to help characterize the Shallow Oil Zone (SOZ) reservoir at the Naval Petroleum Reserve in California (NPRC) at Elk Hills. The SOZ reservoir is undergoing a pilot gas injection program to assess the technical feasibility and economic viability of injecting gas into the SOZ for improved oil recovery. PFTs were utilized in the pilot gas injection to qualitatively assess the extent of the pilot gas injection so as to determine the degree of gas containment within the SOZ reservoir.

  10. Petroleum fingerprinting with organic markers

    USGS Publications Warehouse

    Hostettler, Frances D.; Lorenson, T.D.; Bekins, Barbara A.

    2013-01-01

    Petroleum fingerprinting is an invaluable tool in forensic geochemistry. This article summarizes applications of fingerprinting in several oil spills and natural oil seepages that we have studied during the last 25 years. It shows how each unique chemical fingerprint can be used to correlate or differentiate oils. Fingerprints can provide information about processes in the environment that impact oils such as weathering and microbial degradation. They can be used to evaluate organic matter that contributed to oils, and classify oils with regard to the geological framework of their source, such as evaluating geological facies, age, lithology, and depositional environment.

  11. THE HUMAN CHROMOSOME

    PubMed Central

    Abuelo, J. G.; Moore, Dorothy E.

    1969-01-01

    Human lymphocytes were grown in short-term tissue culture and were arrested in metaphase with Colcemid. Their chromosomes were prepared by the Langmuir trough-critical point drying technique and were examined under the electron microscope. In addition, some chromosomes were digested with trypsin, Pronase, or DNase. The chromosomes consist entirely of tightly packed, 240 ± 50-A chromatin fibers. Trypsin and Pronase treatments induce relaxation of fiber packing and reveal certain underlying fiber arrangements. Furthermore, trypsin treatment demonstrates that the chromatin fiber has a 25–50 A trypsin-resistant core surrounded by a trypsin-sensitive sheath. DNase digestion suggests that this core contains DNA. PMID:5775795

  12. Chromosome Segregation Mechanisms

    PubMed Central

    Nicklas, R. Bruce

    1974-01-01

    Most aspects of chromosome distribution to the daughter cells in meiosis and mitosis are now understood, at the cellular level. The most striking evidence that the proposed explanation is valid is that it correctly predicts the outcome of experiments on living cells in which the experimenter (1) can determine the distribution of any chosen chromosome to a chosen daughter cell, (2) can induce a mal-orientation, and (3) can stabilize a mal-orientation, causing non-disjunction of a chosen bivalent. Recent reviews of chromosome distribution mechanisms are also considered, in an attempt to clarify the remaining unsolved problems. PMID:4442702

  13. Solvent Immersion Imprint Lithography

    SciTech Connect

    Vasdekis, Andreas E.; Wilkins, Michael J.; Grate, Jay W.; Kelly, Ryan T.; Konopka, Allan; Xantheas, Sotiris S.; Chang, M. T.

    2014-06-21

    The mechanism of polymer disolution was explored for polymer microsystem prototyping, including microfluidics and optofluidics. Polymer films are immersed in a solvent, imprinted and finally brought into contact with a non-modified surface to permanently bond. The underlying polymer-solvent interactions were experimentally and theoretically investigated, and enabled rapid polymer microsystem prototyping. During imprinting, small molecule integration in the molded surfaces was feasible, a principle applied to oxygen sensing. Polystyrene (PS) was employed for microbiological studies at extreme environmental conditions. The thermophile anaerobe Clostridium Thermocellum was grown in PS pore-scale micromodels, revealing a double mean generation lifetime than under ideal culture conditions. Microsystem prototyping through directed polymer dissolution is simple and accessible, while simultaneous patterning, bonding, and surface/volume functionalization are possible in less than one minute.

  14. Alternative Bio-Based Solvents for Extraction of Fat and Oils: Solubility Prediction, Global Yield, Extraction Kinetics, Chemical Composition and Cost of Manufacturing

    PubMed Central

    Sicaire, Anne-Gaëlle; Vian, Maryline; Fine, Frédéric; Joffre, Florent; Carré, Patrick; Tostain, Sylvain; Chemat, Farid

    2015-01-01

    The present study was designed to evaluate the performance of alternative bio-based solvents, more especially 2-methyltetrahydrofuran, obtained from crop’s byproducts for the substitution of petroleum solvents such as hexane in the extraction of fat and oils for food (edible oil) and non-food (bio fuel) applications. First a solvent selection as well as an evaluation of the performance was made with Hansen Solubility Parameters and the COnductor-like Screening MOdel for Realistic Solvation (COSMO-RS) simulations. Experiments were performed on rapeseed oil extraction at laboratory and pilot plant scale for the determination of lipid yields, extraction kinetics, diffusion modeling, and complete lipid composition in term of fatty acids and micronutrients (sterols, tocopherols and tocotrienols). Finally, economic and energetic evaluations of the process were conducted to estimate the cost of manufacturing using 2-methyltetrahydrofuran (MeTHF) as alternative solvent compared to hexane as petroleum solvent. PMID:25884332

  15. Alternative bio-based solvents for extraction of fat and oils: solubility prediction, global yield, extraction kinetics, chemical composition and cost of manufacturing.

    PubMed

    Sicaire, Anne-Gaëlle; Vian, Maryline; Fine, Frédéric; Joffre, Florent; Carré, Patrick; Tostain, Sylvain; Chemat, Farid

    2015-04-15

    The present study was designed to evaluate the performance of alternative bio-based solvents, more especially 2-methyltetrahydrofuran, obtained from crop's byproducts for the substitution of petroleum solvents such as hexane in the extraction of fat and oils for food (edible oil) and non-food (bio fuel) applications. First a solvent selection as well as an evaluation of the performance was made with Hansen Solubility Parameters and the COnductor-like Screening MOdel for Realistic Solvation (COSMO-RS) simulations. Experiments were performed on rapeseed oil extraction at laboratory and pilot plant scale for the determination of lipid yields, extraction kinetics, diffusion modeling, and complete lipid composition in term of fatty acids and micronutrients (sterols, tocopherols and tocotrienols). Finally, economic and energetic evaluations of the process were conducted to estimate the cost of manufacturing using 2-methyltetrahydrofuran (MeTHF) as alternative solvent compared to hexane as petroleum solvent.

  16. PARIS II: DESIGNING GREENER SOLVENTS

    EPA Science Inventory

    PARIS II (the program for assisting the replacement of industrial solvents, version II), developed at the USEPA, is a unique software tool that can be used for customizing the design of replacement solvents and for the formulation of new solvents. This program helps users avoid ...

  17. Development of carbon-carbon composites from solvent extracted pitch

    SciTech Connect

    1996-06-24

    There are several methods used to fabricate carbon-carbon composites. One used extensively in the fabrication of aerospace components such as rocket nozzles and reentry vehicle nosetips, as well as commercial components for furnace fixturing and glass manufacturing, is the densification of a woven preform with molten pitch, and the subsequent conversion of the pitch to graphite through heat treatment. Two types of pitch are used in this process; coal tar pitch and petroleum pitch. The objective of this program was to determine if a pitch produced by the direct extraction of coal could be used as a substitute for these pitches in the fabrication of carbon-carbon composites. The program involved comparing solvent extracted pitch with currently accepted pitches and rigidizing a carbon-carbon preform with solvent extracted pitch for comparison with carbon-carbon fabricated with currently available pitch.

  18. Hazardous solvent substitution

    SciTech Connect

    Twitchell, K.E.

    1995-11-01

    Eliminating hazardous solvents is good for the environment, worker safety, and the bottom line. However, even though we are motivated to find replacements, the big question is `What can we use as replacements for hazardous solvents?`You, too, can find replacements for your hazardous solvents. All you have to do is search for them. Search through the vendor literature of hundreds of companies with thousands of products. Ponder the associated material safety data sheets, assuming of course that you can obtain them and, having obtained them, that you can read them. You will want to search the trade magazines and other sources for product reviews. You will want to talk to users about how well the product actually works. You may also want to check US Environmental Protection Agency (EPA) and other government reports for toxicity and other safety information. And, of course, you will want to compare the product`s constituent chemicals with the many hazardous constituency lists to ensure the safe and legal use of the product in your workplace.

  19. Increased frequency of chromosomal aberrations in railroad car painters.

    PubMed

    Piña-Calva, A; Madrigal-Bujaidar, E; Fuentes, M V; Neria, P; Pérez-Lucio, C; Vélez-Zamora, N M

    1991-01-01

    The purpose of this study was to determine if exposure to paints and solvents contributes to chromosomal alterations in occupationally exposed individuals. A total of 25 male railroad and underground railroad car painters were studied. This group had a mean age of 32.7 y and a mean exposure time of 5.2 y. The results were compared with those obtained for 25 healthy (unexposed) males. The scoring of structural chromosome aberrations clearly revealed an increase in the number of all types of aberrations considered in the population of painters. This suggests that exposure to a combination of chemicals may increase genotoxicity in industrial workers.

  20. Chromosome doubling method

    DOEpatents

    Kato, Akio

    2006-11-14

    The invention provides methods for chromosome doubling in plants. The technique overcomes the low yields of doubled progeny associated with the use of prior techniques for doubling chromosomes in plants such as grasses. The technique can be used in large scale applications and has been demonstrated to be highly effective in maize. Following treatment in accordance with the invention, plants remain amenable to self fertilization, thereby allowing the efficient isolation of doubled progeny plants.

  1. Chromosome evolution in Eulipotyphla.

    PubMed

    Biltueva, L; Vorobieva, N

    2012-01-01

    We integrated chromosome painting information on 5 core-insectivora species available in the literature with new Zoo-FISH data for Iberian shrew (Sorex granarius) and Altai mole (Talpa altaica). Our analysis of these 7 species allowed us to determine the chromosomal features of Eulipotyphla genomes and to update the previously proposed ancestral karyotype for 2 main groups of the Sorex genus. The chromosome painting evidence with human painting probes (HSA) reveals the presence of the 2 unique associations HSA4/5 and 1/10p/12/22b, which support Eulipotyphla. There are a series of synapomorphies both for Erinaceidae (HSA3/1/5, 3/17, 11/15 and 10/20) and for Soricinae (HSA5/9, 6/7/16, 8/3/21 and 11/12/22). We found associations that link Talpidae/Erinaceidae (HSA7/8, 1/5 and 1/19p), Talpidae/Soricidae (HSA1/8/4) and Erinaceidae/Soricidae (HSA4/20 and 2/13). Genome conservation in Eulipotyphla was estimated on the basis of the number of evolutionary breaks in the ancestral mammalian chromosomes. In total, 7 chromosomes of the boreo-eutherian ancestor (BEA8 or 10, 9, 17, 18, 20-22) were retained in all eulipotyphlans studied; among them moles show the highest level of chromosome conservation. The integration of sequence data into the chromosome painting information allowed us to further examine the chromosomal syntenies within a phylogenetic perspective. Based on our analysis we offer the most parsimonious reconstruction of phylogenetic relationships in Eulipotyphla. The cytogenetic reconstructions based on these data do not conflict with molecular phylogenies supporting basal position of Talpidae in the order.

  2. [Sex chromosomes and meiosis].

    PubMed

    Guichaoua, M-R; Geoffroy-Siraudin, C; Tassistro, V; Ghalamoun-Slaimi, R; Perrin, J; Metzler-Guillemain, C

    2009-01-01

    Sex chromosome behaviour fundamentally differs between male and female meiosis. In oocyte, X chromosomes synapse giving a XX bivalent which is not recognizable in their morphology and behaviour from autosomal bivalents. In human male, X and Y chromosomes differ from one another in their morphology and their genetic content, leading to a limited pairing and preventing genetic recombination, excepted in homologous region PAR1. During pachytene stage of the first meiotic prophase, X and Y chromosomes undergo a progressive condensation and form a transcriptionally silenced peripheral XY body. The condensation of the XY bivalent during pachytene stage led us to describe four pachytene substages and to localize the pachytene checkpoint between substages 2 and 3. We also defined the pachytene index (PI=P1+P2/P1+P2+P3+P4) which is always less than 0.50 in normal meiosis. XY body undergoes decondensation at diplotene stage, but transcriptional inactivation of the two sex chromosomes or Meiotic Sex Chromosome Inactivation (MSCI) persists through to the end of spermatogenesis. Sex chromosome inactivation involves several proteins, some of them were now identified. Two isoforms of the HP1 protein, HP1beta and HP1gamma, are involved in the facultative heterochromatinization of the XY body, but the initiation of this process involves the phosphorylation of the protein H2AX by the kinase ATR whose recruitment depends on BRCA1. Extensive researches on the inactivation of the sex chromosomes during male meiosis will allow to a better understanding of some male infertilities.

  3. Genetic markers on chromosome 7.

    PubMed Central

    Tsui, L C

    1988-01-01

    Chromosome 7 is frequently associated with chromosome aberrations, rearrangements, and deletions. It also contains many important genes, gene families, and disease loci. This brief review attempts to summarise these and other interesting aspects of chromosome 7. With the rapid accumulation of cloned genes and polymorphic DNA fragments, this chromosome has become an excellent substrate for molecular genetic studies. PMID:3290488

  4. Investigation of Non-Petroleum Based Fuels

    DTIC Science & Technology

    2005-09-01

    to investigate Non-Petroleum Based Fuels and Lubricants for Advanced CIDI Automobile Engines, in two phases. The project began with a Planning...passenger car engine. Planning was to include defining the research necessary for future transitional non- petroleum fuel components that could also be

  5. Technology Roadmap for the Petroleum Industry

    SciTech Connect

    none,

    2000-02-01

    The petroleum refining industry defined a detailed R&D roadmap, Technology Roadmap for the Petroleum Industry, to identify high-priority areas for technology R&D. Those priorities helped ITP target cost-shared solicitations and guide development of a balanced R&D portfolio to yield useful results in the near, mid, and long-term.

  6. Petroleum supply annual 1993. Volume 2

    SciTech Connect

    Not Available

    1994-06-01

    This publication contains information on the supply and disposition of crude oil and petroleum products. The publication reflects data that were collected from the petroleum industry during 1993 through annual and monthly surveys. This second volume contains final statistics for each month of 1993.

  7. 75 FR 48320 - National Petroleum Council

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-08-10

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF ENERGY National Petroleum Council AGENCY: Department of Energy, Office of Fossil Energy. ACTION: Notice of open meeting. SUMMARY: This notice announces a meeting of the National Petroleum Council. The Federal...

  8. 77 FR 2714 - National Petroleum Council

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-01-19

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF ENERGY National Petroleum Council AGENCY: Office of Fossil Energy, Department of Energy. ACTION: Notice of Renewal... that the National Petroleum Council has been renewed for a two-year period, beginning January 12,...

  9. 31 CFR 561.318 - Petroleum.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 31 Money and Finance:Treasury 3 2012-07-01 2012-07-01 false Petroleum. 561.318 Section 561.318 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE OF FOREIGN... § 561.318 Petroleum. A mixture of hydrocarbons that exists in liquid phase in natural...

  10. Detecting and discriminating petroleum and petroleum products from water on terrestrial backgrounds with hyperspectral remote sensing

    NASA Astrophysics Data System (ADS)

    Allen, C. Scott

    Petroleum and petroleum product spills are frequent and as both Hurricane Katrina and the Deepwater Horizon accident demonstrated, they can be catastrophic. A prominent portion of the response is mapping the extent to which oil has reached both shoreline and inland areas. Yet, petroleum and water--when present on common substrates such as sand, concrete, and vegetation--are often difficult to distinguish in panchromatic and multispectral imagery. This research demonstrates how hyperspectral remote sensing, also known as imaging spectroscopy, provides petroleum detection and discrimination from water on terrestrial backgrounds. Utilizing spectral libraries, it also performs material identification and successfully discriminates some petroleum products from one another as a means of further classification and mapping spill extent. To achieve these goals, this effort collected spectral signatures of four crude oils and five refined petroleum products on ten common terrestrial substrates and compared them to water on the same backgrounds over a period of 1-90 days, depending on liquid volatility. The result is the first publicly available spectral library for petroleum and petroleum products on terrestrial substrates in the reflective portion of the electromagnetic spectrum (400-2500 nm) for use in petroleum spill detection and response. It also establishes a baseline for the use of imaging spectroscopy as a technique for confident, accurate petroleum detection in the terrestrial environment. Using common material identification algorithms, the spectra were successfully applied to airborne hyperspectral data from the Hurricane Katrina disaster in 2005 as a proof-of-concept for discriminating petroleum from water.

  11. Epilepsy and chromosomal abnormalities

    PubMed Central

    2010-01-01

    Background Many chromosomal abnormalities are associated with Central Nervous System (CNS) malformations and other neurological alterations, among which seizures and epilepsy. Some of these show a peculiar epileptic and EEG pattern. We describe some epileptic syndromes frequently reported in chromosomal disorders. Methods Detailed clinical assessment, electrophysiological studies, survey of the literature. Results In some of these congenital syndromes the clinical presentation and EEG anomalies seems to be quite typical, in others the manifestations appear aspecific and no strictly linked with the chromosomal imbalance. The onset of seizures is often during the neonatal period of the infancy. Conclusions A better characterization of the electro clinical patterns associated with specific chromosomal aberrations could give us a valuable key in the identification of epilepsy susceptibility of some chromosomal loci, using the new advances in molecular cytogenetics techniques - such as fluorescent in situ hybridization (FISH), subtelomeric analysis and CGH (comparative genomic hybridization) microarray. However further studies are needed to understand the mechanism of epilepsy associated with chromosomal abnormalities. PMID:20438626

  12. SOLVENT FIRE BY-PRODUCTS

    SciTech Connect

    Walker, D; Samuel Fink, S

    2006-05-22

    Southwest Research Institute (SwRI) conducted a burn test of the Caustic-Side Solvent Extraction (CSSX) solvent to determine the combustion products. The testing showed hydrogen fluoride gas is not a combustion product from a solvent fire when up to 70% of the solvent is consumed. The absence of HF in the combustion gases may reflect concentration of the modifier containing the fluoride groups in the unburned portion. SwRI reported results for other gases (CO, HCN, NOx, formaldehyde, and hydrocarbons). The results, with other supporting information, can be used for evaluating the consequences of a facility fire involving the CSSX solvent inventory.

  13. Solvent replacement for green processing.

    PubMed Central

    Sherman, J; Chin, B; Huibers, P D; Garcia-Valls, R; Hatton, T A

    1998-01-01

    The implementation of the Montreal Protocol, the Clean Air Act, and the Pollution Prevention Act of 1990 has resulted in increased awareness of organic solvent use in chemical processing. The advances made in the search to find "green" replacements for traditional solvents are reviewed, with reference to solvent alternatives for cleaning, coatings, and chemical reaction and separation processes. The development of solvent databases and computational methods that aid in the selection and/or design of feasible or optimal environmentally benign solvent alternatives for specific applications is also discussed. Images Figure 2 Figure 3 PMID:9539018

  14. Micromechanics of human mitotic chromosomes

    NASA Astrophysics Data System (ADS)

    Sun, Mingxuan; Kawamura, Ryo; Marko, John F.

    2011-02-01

    Eukaryote cells dramatically reorganize their long chromosomal DNAs to facilitate their physical segregation during mitosis. The internal organization of folded mitotic chromosomes remains a basic mystery of cell biology; its understanding would likely shed light on how chromosomes are separated from one another as well as into chromosome structure between cell divisions. We report biophysical experiments on single mitotic chromosomes from human cells, where we combine micromanipulation, nano-Newton-scale force measurement and biochemical treatments to study chromosome connectivity and topology. Results are in accord with previous experiments on amphibian chromosomes and support the 'chromatin network' model of mitotic chromosome structure. Prospects for studies of chromosome-organizing proteins using siRNA expression knockdowns, as well as for differential studies of chromosomes with and without mutations associated with genetic diseases, are also discussed.

  15. Process for desulfurizing petroleum feedstocks

    DOEpatents

    Gordon, John Howard; Alvare, Javier

    2014-06-10

    A process for upgrading an oil feedstock includes reacting the oil feedstock with a quantity of an alkali metal, wherein the reaction produces solid materials and liquid materials. The solid materials are separated from the liquid materials. The solid materials may be washed and heat treated by heating the materials to a temperature above 400.degree. C. The heat treating occurs in an atmosphere that has low oxygen and water content. Once heat treated, the solid materials are added to a solution comprising a polar solvent, where sulfide, hydrogen sulfide or polysulfide anions dissolve. The solution comprising polar solvent is then added to an electrolytic cell, which during operation, produces alkali metal and sulfur.

  16. Petroleum mineral oil refining and evaluation of cancer hazard.

    PubMed

    Mackerer, Carl R; Griffis, Larry C; Grabowski Jr, John S; Reitman, Fred A

    2003-11-01

    Petroleum base oils (petroleum mineral oils) are manufactured from crude oils by vacuum distillation to produce several distillates and a residual oil that are then further refined. Aromatics including alkylated polycyclic aromatic compounds (PAC) are undesirable constituents of base oils because they are deleterious to product performance and are potentially carcinogenic. In modern base oil refining, aromatics are reduced by solvent extraction, catalytic hydrotreating, or hydrocracking. Chronic exposure to poorly refined base oils has the potential to cause skin cancer. A chronic mouse dermal bioassay has been the standard test for estimating carcinogenic potential of mineral oils. The level of alkylated 3-7-ring PAC in raw streams from the vacuum tower must be greatly reduced to render the base oil noncarcinogenic. The processes that can reduce PAC levels are known, but the operating conditions for the processing units (e.g., temperature, pressure, catalyst type, residence time in the unit, unit engineering design, etc.) needed to achieve adequate PAC reduction are refinery specific. Chronic dermal bioassays provide information about whether conditions applied can make a noncarcinogenic oil, but cannot be used to monitor current production for quality control or for conducting research or developing new processes since this test takes at least 78 weeks to conduct. Three short-term, non-animal assays all involving extraction of oil with dimethylsulfoxide (DMSO) have been validated for predicting potential carcinogenic activity of petroleum base oils: a modified Ames assay of a DMSO extract, a gravimetric assay (IP 346) for wt. percent of oil extracted into DMSO, and a GC-FID assay measuring 3-7-ring PAC content in a DMSO extract of oil, expressed as percent of the oil. Extraction with DMSO concentrates PAC in a manner that mimics the extraction method used in the solvent refining of noncarcinogenic oils. The three assays are described, data demonstrating the

  17. Philadelphia chromosome duplication as a ring-shaped chromosome.

    PubMed

    Borjas-Gutierrez, Cesar; Gonzalez-Garcia, Juan Ramon

    2016-01-01

    The gain of a second copy of the Philadelphia chromosome is one of the main secondary chromosomal changes related to the clonal evolution of cells with t(9;22) in chronic myelogenous leukemia. This gain causes the acquisition of another copy of the BCR/ABL1 fusion gene. Isochromosomes of the der(22) chromosome or double minute chromosomes are well known to lead an increased copy number of BCR/ABL1 gene. There is no antecedent of Philadelphia chromosome duplication as a ring chromosome. A recent published report contains evidence that strongly suggests that the Philadelphia chromosome was duplicated as a ring chromosome, observation that was overlooked by the authors. The instability inherent to the ring chromosome increases the risk of emergence of clones containing more and more BCR/ABL1 gene copies, which would produce increased fitness for clonal selection, resulting in worsening of the patient's prognosis.

  18. Petroleum marketing monthly with data for April 1995

    SciTech Connect

    1995-07-05

    The Petroleum Marketing Monthly (PMM) provides information and statistical data on a variety of crude oils and refined petroleum products. The publication presents statistics on crude oil costs and refined petroleum products sales for use by industry, government private sector analysts, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the f.o.b. and landed cost of imported crude oil, and the refiners` acquisition cost of crude oil. Refined petroleum product sales data include motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane. The Petroleum Marketing Division, Office of Oil and Gas, Energy Information Administration ensures the accuracy, quality, and confidentiality of the published data on the Petroleum Marketing Monthly. Monthly statistics on purchases of crude oil and sales of petroleum products are presented in the Petroleum Marketing Monthly in five sections: Summary statistics; crude oil prices; prices of petroleum products; volumes of petroleum products; and prime supplier sales volumes of petroleum products for local consumption.

  19. Petroleum marketing monthly, June 1995 with data for March 1995

    SciTech Connect

    1995-06-16

    The Petroleum Marketing Monthly (PMM) provides information and statistical data on a variety of crude oils and refined petroleum products. The publication presents statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the f.o.b. and landed cost of imported crude oil, and the refiners` acquisition cost of crude oil. Refined petroleum product sales data include motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane. The Petroleum Marketing Division, Office of Oil and Gas, Energy Information Administration ensures the accuracy, quality, and confidentiality of the published data in the Petroleum Marketing Monthly. Monthly statistics on purchases of crude oil and sales of petroleum products are presented in the Petroleum Marketing Monthly in five sections: Summary Statistics Crude Oil Prices; Prices of Petroleum Products; Volumes of Petroleum Products; and Prime Supplier Sales Volumes of Petroleum Products for Local Consumption.

  20. Solvent Fractionation of Lignin

    SciTech Connect

    Chatterjee, Sabornie; Saito, Tomonori

    2014-01-01

    Lignin is a highly abundant source of renewable carbon that can be considered as a valuable sustainable source of biobased materials. The major issues for the commercial production of value added high performance lignin products are lignin s physical and chemical heterogenities. To overcome these problems, a variety of procedures have been developed to produce pure lignin suitable for high performace applications such as lignin-derived carbon materials. However, most of the isolation procedures affect lignin s properties and structure. In this chapter, a short review of the effect of solvent fractionation on lignin s properties and structure is presented.

  1. Drilling and general petroleum engineering

    SciTech Connect

    Not Available

    1994-01-01

    Forty-nine papers are included in the Drilling and General Petroleum Engineering Volume of the SPE Annual Conference and Exhibition proceedings. The conference was held in New Orleans, Louisiana, September 25-28, 1994. The papers cover such topics as: extended reach well drilling, development of marginal satellite fields, slim hole drilling, pressure loss predictions, models for cuttings transport, ester-based drilling fluid systems, borehole stability, cementing, operations, bit failures, roller core bits, well tracking techniques, nitrogen drilling systems, plug failures, drill bit and drillstring dynamics, slim hole vibrations, reserve estimates, enhanced recovery methods, waste disposal, and engineering salary trends. A separate abstract and indexing was prepared for each paper for inclusion in the Energy Science and Technology Database.

  2. Petroleum resins and their production

    SciTech Connect

    Luvinh, Q.

    1989-04-25

    A process is described for the production of petroleum resins compatible with base polymers in hot melt formulations and having a softening point of from about 60/sup 0/C. to about 120/sup 0/C. and Gardner color of about 4 or less, comprising copolymerizing using a Friedel-Crafts catalyst. The mixture is substantially free form cyclopentadiene and dicyclopentadiene. This patent also describes a resin consisting essentially of a copolymer containing from 5 to 80 wt. % of units derived from an olefinically unsaturated aromatic compound form 5 to 80 wt. % of units derived from C/sub 5/ olefines or diolefines or C/sub 6/ olefines diolefines or a mixture of C/sub 5/ and C/sub 6/ olefines or diolefines and from 7 to 45 wt. % of units derived from a terpene.

  3. "Chromosome": a knowledge-based system for the chromosome classification.

    PubMed

    Ramstein, G; Bernadet, M

    1993-01-01

    Chromosome, a knowledge-based analysis system has been designed for the classification of human chromosomes. Its aim is to perform an optimal classification by driving a tool box containing the procedures of image processing, pattern recognition and classification. This paper presents the general architecture of Chromosome, based on a multiagent system generator. The image processing tool box is described from the met aphasic enhancement to the fine classification. Emphasis is then put on the knowledge base intended for the chromosome recognition. The global classification process is also presented, showing how Chromosome proceeds to classify a given chromosome. Finally, we discuss further extensions of the system for the karyotype building.

  4. Analysis of petroleum-contaminated soils by thin-layer chromatography with flame ionization detection

    SciTech Connect

    Napolitano, G.E.; Richmond, J.E.

    1995-12-31

    Thin-layer chromatography with flame ionization detection (TLC-FID) offers a rapid and accurate method for the analysis of non-volatile organic materials. If the instrument is properly calibrated and the operational parameters are standardized, TLC-FID permits a rapid and accurate quantification of total petroleum hydrocarbons (TPH), and offers the possibility of separation and quantification of the major types of components in petroleum and petroleum products. Petroleum hydrocarbons from contaminated soil were extracted overnight with a mixture of chloroform:methanol. The analysis method consisted of spotting a small volume of the samples on silica-coated quartz rods followed by three chromatographic developments in solvent systems of increasing polarities. This series of chromatographic steps resulted in the complete separation of aliphatic hydrocarbons, aromatic hydrocarbons, resins and asphaltenes, starting from mixtures of the materials. This method also allows the quantification of aromatic and aliphatic hydrocarbons without interference from biogenic lipids present in the soil. A simplified version of this method allowed excellent separation of aliphatics plus aromatics (forming a single peak) from resins and asphaltenes. The instrument provides the complete analysis of 10 samples in about one hour after extraction. This rapid analytical tool is especially suited for synoptic studies or for the screening of a large number of samples prior to the consideration of more detailed and costly analyses.

  5. The effect of solvents on the stabilities (color and Fe) of anthocyanin isolated from the red-color-melinjo peels

    SciTech Connect

    Tarmizi, Ermiziar E-mail: ermitarmizi@gmail.com; Saragih, Raskita; Lalasari, Latifa Hanum E-mail: lati003@lipi.go.id

    2015-12-29

    Anthocyanin from the red-color-melinjo peels could be isolated using a polar solvent (ethanol) [ermiziar, 2010]. The amount of hydrocarbons in the structure of anthocyanin might cause that anthocyanin could be isolated using a non polar solvent. The purpose of research is to isolate anthocyanin using non polar solvents (hexane and petroleum ether) with maceration steps for 24 hours and separate solvents using rotary evaporator equipment. The stability of anthocyanin could be observed every week (1,2,3 and 4 weeks) in various environmental conditions (with or without light in refrigerator and open or closed storage). The characterization of anthocyanin was analyzed with visual (physic photo) and or using equipments such as Fourier Transform Infrared Spectroscopy (FTIR) for determining functional groups, Ultraviolet–Visible Spectroscopy (UV/Vis) with 500-550 nm wavelengths for deciding absorption of anthocyanin and atomic absorption spectroscopy (AAS) for analyzing Fe element. The result showed that anthocyanin isolation with hexane solvent has yield higher than petroleum eter solvent. From the results of physic observation for 4 weeks looked that there are changing colors of samples significant after 3 and 4 weeks in cooler with or without light. The stability of anthocyanin color was the best on the storage time until 2 weeks using hexane solvent in refrigerator and closed condition that it has absorption of 0.6740 with 500 nm wavelengths and Fe concentration 6.29 ppm.

  6. Effect of the solvent type and temperature on phytosterol contents and compositions of wheat straw, bran, and germ extracts.

    PubMed

    Dunford, Nurhan Turgut; Irmak, Sibel; Jonnala, Ramakanth

    2009-11-25

    Wheat fractions, such as bran, germ, and straw, are rich in a number of health beneficial bioactive compounds. However, they have not been exploited to their full capacity for value-added product development. This study examines the potential of recovering phytosterol (PS)-enriched extracts from wheat germ, bran, and straw. The main objective of the study was to evaluate the effect of solvent type and temperature on PS content and composition in straw, bran, and germ extracts. Petroleum ether, chloroform, n-hexane, and ethanol were used as solvents. A pressurized solvent extraction system was used for extraction of wheat fractions. Germ extracts had the highest total PS content followed by straw and bran extracts. Beta-sitosterol, campesterol, and stigmasterol were the main PSs in all of the extracts. Ethanol extraction resulted in the lowest total PS recovery from germ. Solvent type had a significant effect on PS composition in straw extracts. beta-Sitosterol was the most abundant PS in straw hexane extracts (74% of total PS). Petroleum ether, chloroform, and ethanol extracted more stigmasterol than beta-sitosterol from straw. This study demonstrated that the solvent type and temperature had significant effects on both PS content and composition of extracts collected from wheat fractions. Because of the complex nature of the agricultural materials, solvent selection and process optimization need to be based on experimental data. Pressurized solvent extraction is a useful technique to screen complex biological materials for their composition and to determine processing conditions to be optimized.

  7. The effect of solvents on the stabilities (color and Fe) of anthocyanin isolated from the red-color-melinjo peels

    NASA Astrophysics Data System (ADS)

    Tarmizi, Ermiziar; Lalasari, Latifa Hanum; Saragih, Raskita

    2015-12-01

    Anthocyanin from the red-color-melinjo peels could be isolated using a polar solvent (ethanol) [ermiziar, 2010]. The amount of hydrocarbons in the structure of anthocyanin might cause that anthocyanin could be isolated using a non polar solvent. The purpose of research is to isolate anthocyanin using non polar solvents (hexane and petroleum ether) with maceration steps for 24 hours and separate solvents using rotary evaporator equipment. The stability of anthocyanin could be observed every week (1,2,3 and 4 weeks) in various environmental conditions (with or without light in refrigerator and open or closed storage). The characterization of anthocyanin was analyzed with visual (physic photo) and or using equipments such as Fourier Transform Infrared Spectroscopy (FTIR) for determining functional groups, Ultraviolet-Visible Spectroscopy (UV/Vis) with 500-550 nm wavelengths for deciding absorption of anthocyanin and atomic absorption spectroscopy (AAS) for analyzing Fe element. The result showed that anthocyanin isolation with hexane solvent has yield higher than petroleum eter solvent. From the results of physic observation for 4 weeks looked that there are changing colors of samples significant after 3 and 4 weeks in cooler with or without light. The stability of anthocyanin color was the best on the storage time until 2 weeks using hexane solvent in refrigerator and closed condition that it has absorption of 0.6740 with 500 nm wavelengths and Fe concentration 6.29 ppm.

  8. Petroleum marketing monthly, November 1991. [Contains glossary

    SciTech Connect

    Not Available

    1991-11-07

    The Petroleum Marketing Monthly is designed to give information and statistical data about a variety of crude oils and refined petroleum products. The publication provides statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the f.o.b. and landed cost of imported crude oil, and the refiners' acquisition cost of crude oil. Sales data for motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane are presented. 12 figs., 53 tabs.

  9. Macros help solve common petroleum engineering calculations

    SciTech Connect

    Muchmore, D.

    1995-11-06

    A toolkit consisting of macros provides petroleum engineers an easy method for incorporating petroleum fluid properties into spreadsheets. Published correlations were used to write the macros, defined as Microsoft Excel functions. Engineers can call these functions when constructing spreadsheets and eliminate having to access external sources for many common fluid property correlations. The Excel functions also allow the correlations to be easily incorporated into existing spreadsheets. A collection of spreadsheets is included with the toolkit that use these functions for the solution of common petroleum engineering problems. Functions, terms, spreadsheets are listed in the accompany box. The article also explains how to obtain a diskette containing the macros.

  10. Petroleum supply annual 1998: Volume 1

    SciTech Connect

    1999-06-01

    The ``Petroleum Supply Annual`` (PSA) contains information on the supply and disposition of crude oil and petroleum products. The publication reflects data that were collected from the petroleum industry during 1998 through annual and monthly surveys. The PSA is divided into two volumes. This first volume contains three sections: Summary Statistics, Detailed Statistics, and Refinery Statistics; each with final annual data. The second volume contains final statistics for each month of 1998, and replaces data previously published in the PSA. The tables in Volumes 1 and 2 are similarly numbered to facilitate comparison between them. 16 figs., 59 tabs.

  11. Engineering salary trends in the petroleum industry

    SciTech Connect

    Brown, D.C.; Terrant, L.E.

    1986-01-01

    To understand the changes that occur cyclically in engineering manpower supply/demand trends in the petroleum industry, it is desirable to have an awareness of some of the major activities and factors affecting such trends; of starting Petroleum Engineering salaries relating to that background; of the on-going engineering salary status which developed from these activities; and of the large effect that high starting and on-going salaries do have in attracting and retaining engineers within the petroleum industry. It is important to realize that changes in industry trends can be brought about both by economic and political decisions, in both domestic and international activities.

  12. Strategic Petroleum Reserve: Annual/quarterly report

    SciTech Connect

    Not Available

    1994-02-16

    Section 165 of the Energy Policy and Conservation Act (Public Law 94-163), as amended, requires the Secretary of Energy to submit annual and quarterly reports to the President and the Congress on activities of the Strategic Petroleum Reserve. This report combines the fourth quarter 1993 Quarterly Report with the 1993 Annual Report. Key activities described include appropriations; life extension planning; expansion planning; Strategic Petroleum Reserve oil acquisition; the oil stabilization program; and the refined petroleum product reserve test programs. Sections of this report also describe the program mission; the storage facility development program; environmental compliance; budget and finance; and drawdown and distribution.

  13. Petroleum Marketing Monthly, January 1991. [Contains Glossary

    SciTech Connect

    Not Available

    1991-01-09

    The Petroleum Marketing Monthly (PMM) is designed to give information and statistical data about a variety of crude oils and refined petroleum products. The publication provides statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the f.o.b. and landed cost of imported crude oil, and the refiners' acquisition cost of crude oil. Sales data for motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane are presented. 12 figs., 55 tabs.

  14. Geology for petroleum exploration, drilling and production

    SciTech Connect

    Hyne, N.J.

    1984-01-01

    This book provides a non-technical introduction to the subject of oil. The author guides the readers in logical sequence: How oil and gas form and accumulate; how to explore for oil; and how to drill and complete a well and produce the petroleum. The contents are: The earth's crust; identification of common rocks and minerals; weathering, erosion, and unconformities; deformation; geologic time; sandstone reservoirs; limestone reservoirs; subsurface fluids; sedimentary rock patterns; surface and subsurface maps; ocean environment - plate tectonics; hydrocarbons source rocks, generation, migration and accumulation; well logs, traps; petroleum exploration; drilling a well; completing a well; and petroleum production.

  15. Analysis of soils contaminated with petroleum constituents

    SciTech Connect

    O'Shay, T.A. ); Hoddinott, K. )

    1994-01-01

    This symposium was held in Atlanta, Georgia on June 24, 1993. The purpose of the symposium was to provide a forum for exchange of information on petroleum contaminated soils. When spilled on the ground, petroleum products can cause massive problems in the environment. In this Special Technical Publication (STP), papers were selected in two categories; the analytical procedures for soil contaminated with petroleum hydrocarbons and the behavior of hydrocarbon contaminated soils. Individual papers have been processed separately for inclusion in the appropriate data bases.

  16. Sex Chromosome Drive

    PubMed Central

    Helleu, Quentin; Gérard, Pierre R.; Montchamp-Moreau, Catherine

    2015-01-01

    Sex chromosome drivers are selfish elements that subvert Mendel's first law of segregation and therefore are overrepresented among the products of meiosis. The sex-biased progeny produced then fuels an extended genetic conflict between the driver and the rest of the genome. Many examples of sex chromosome drive are known, but the occurrence of this phenomenon is probably largely underestimated because of the difficulty to detect it. Remarkably, nearly all sex chromosome drivers are found in two clades, Rodentia and Diptera. Although very little is known about the molecular and cellular mechanisms of drive, epigenetic processes such as chromatin regulation could be involved in many instances. Yet, its evolutionary consequences are far-reaching, from the evolution of mating systems and sex determination to the emergence of new species. PMID:25524548

  17. Meiotic sex chromosome inactivation.

    PubMed

    Turner, James M A

    2007-05-01

    X chromosome inactivation is most commonly studied in the context of female mammalian development, where it performs an essential role in dosage compensation. However, another form of X-inactivation takes place in the male, during spermatogenesis, as germ cells enter meiosis. This second form of X-inactivation, called meiotic sex chromosome inactivation (MSCI) has emerged as a novel paradigm for studying the epigenetic regulation of gene expression. New studies have revealed that MSCI is a special example of a more general mechanism called meiotic silencing of unsynapsed chromatin (MSUC), which silences chromosomes that fail to pair with their homologous partners and, in doing so, may protect against aneuploidy in subsequent generations. Furthermore, failure in MSCI is emerging as an important etiological factor in meiotic sterility.

  18. Vibrios Commonly Possess Two Chromosomes

    PubMed Central

    Okada, Kazuhisa; Iida, Tetsuya; Kita-Tsukamoto, Kumiko; Honda, Takeshi

    2005-01-01

    The prevalence of the two-chromosome configuration was investigated in 34 species of vibrios and closely related species. Pulsed-field gel electrophoresis of undigested genomic DNA suggested that vibrios commonly have two chromosomes. The size of the large chromosome is predominantly within a narrow range (3.0 to 3.3 Mb), whereas the size of the small chromosome varies considerably among the vibrios (0.8 to 2.4 Mb). This fact suggests that the structure of the small chromosome is more flexible than that of the large chromosome during the evolution of vibrios. PMID:15629946

  19. Petroleum and Health Care: Evaluating and Managing Health Care's Vulnerability to Petroleum Supply Shifts

    PubMed Central

    Bednarz, Daniel; Bae, Jaeyong; Pierce, Jessica

    2011-01-01

    Petroleum is used widely in health care—primarily as a transport fuel and feedstock for pharmaceuticals, plastics, and medical supplies—and few substitutes for it are available. This dependence theoretically makes health care vulnerable to petroleum supply shifts, but this vulnerability has not been empirically assessed. We quantify key aspects of petroleum use in health care and explore historical associations between petroleum supply shocks and health care prices. These analyses confirm that petroleum products are intrinsic to modern health care and that petroleum supply shifts can affect health care prices. In anticipation of future supply contractions lasting longer than previous shifts and potentially disrupting health care delivery, we propose an adaptive management approach and outline its application to the example of emergency medical services. PMID:21778473

  20. Solvent Blending Strategy to Upgrade MCU CSSX Solvent to Equivalent Next-Generation CSSX Solvent

    SciTech Connect

    Delmau, Laetitia Helene; Moyer, Bruce A

    2012-12-01

    The results of the present study have validated an equal-volume blending strategy for upgrading freshly prepared CSSX solvent to a blended solvent functionally equivalent to NG-CSSX solvent. It is shown that blending fresh CSSX solvent as currently used in MCU with an equal volume of an NG-CSSX solvent concentrate of appropriate composition yields a blended solvent composition (46.5 mM of MaxCalix, 3.5 mM of BOBCalixC6, 0.5 M of Cs-7SB, 3 mM of guanidine suppressor, and 1.5 mM of TOA in Isopar L) that exhibits equivalent batch ESS performance to that of the NG-CSSX solvent containing 50 mM of MaxCalix, 0.5 M of Cs-7SB, and 3 mM of guanidine suppressor in Isopar L. The solvent blend composition is robust to third-phase formation. Results also show that a blend containing up to 60% v/v of CSSX solvent could be accommodated with minimal risk. Extraction and density data for the effect of solvent concentration mimicking diluent evaporation or over-dilution of the equal-volume blended solvent are also given, providing input for setting operational limits. Given that the experiments employed all pristine chemicals, the results do not qualify a blended solvent starting with actual used MCU solvent, which can be expected to have undergone some degree of degradation. Consequently, further work should be considered to evaluate this risk and implement appropriate remediation if needed.

  1. 21 CFR 172.888 - Synthetic petroleum wax.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 3 2014-04-01 2014-04-01 false Synthetic petroleum wax. 172.888 Section 172.888... Synthetic petroleum wax. Synthetic petroleum wax may be safely used in or on foods in accordance with the following conditions: (a) Synthetic petroleum wax is a mixture of solid hydrocarbons, paraffinic in...

  2. 21 CFR 178.3720 - Petroleum wax, synthetic.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 3 2014-04-01 2014-04-01 false Petroleum wax, synthetic. 178.3720 Section 178... § 178.3720 Petroleum wax, synthetic. Synthetic petroleum wax may be safely used in applications and under the same conditions where naturally derived petroleum wax is permitted in subchapter B of...

  3. 21 CFR 178.3720 - Petroleum wax, synthetic.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 3 2013-04-01 2013-04-01 false Petroleum wax, synthetic. 178.3720 Section 178... SANITIZERS Certain Adjuvants and Production Aids § 178.3720 Petroleum wax, synthetic. Synthetic petroleum wax may be safely used in applications and under the same conditions where naturally derived petroleum...

  4. 21 CFR 178.3720 - Petroleum wax, synthetic.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Petroleum wax, synthetic. 178.3720 Section 178.3720... Certain Adjuvants and Production Aids § 178.3720 Petroleum wax, synthetic. Synthetic petroleum wax may be safely used in applications and under the same conditions where naturally derived petroleum wax...

  5. 21 CFR 172.888 - Synthetic petroleum wax.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 3 2013-04-01 2013-04-01 false Synthetic petroleum wax. 172.888 Section 172.888... CONSUMPTION Multipurpose Additives § 172.888 Synthetic petroleum wax. Synthetic petroleum wax may be safely used in or on foods in accordance with the following conditions: (a) Synthetic petroleum wax is...

  6. 21 CFR 178.3720 - Petroleum wax, synthetic.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 3 2011-04-01 2011-04-01 false Petroleum wax, synthetic. 178.3720 Section 178... SANITIZERS Certain Adjuvants and Production Aids § 178.3720 Petroleum wax, synthetic. Synthetic petroleum wax may be safely used in applications and under the same conditions where naturally derived petroleum...

  7. 21 CFR 172.888 - Synthetic petroleum wax.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Synthetic petroleum wax. 172.888 Section 172.888... CONSUMPTION Multipurpose Additives § 172.888 Synthetic petroleum wax. Synthetic petroleum wax may be safely used in or on foods in accordance with the following conditions: (a) Synthetic petroleum wax is...

  8. 21 CFR 172.888 - Synthetic petroleum wax.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 3 2012-04-01 2012-04-01 false Synthetic petroleum wax. 172.888 Section 172.888... CONSUMPTION Multipurpose Additives § 172.888 Synthetic petroleum wax. Synthetic petroleum wax may be safely used in or on foods in accordance with the following conditions: (a) Synthetic petroleum wax is...

  9. 21 CFR 178.3720 - Petroleum wax, synthetic.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 3 2012-04-01 2012-04-01 false Petroleum wax, synthetic. 178.3720 Section 178... SANITIZERS Certain Adjuvants and Production Aids § 178.3720 Petroleum wax, synthetic. Synthetic petroleum wax may be safely used in applications and under the same conditions where naturally derived petroleum...

  10. 21 CFR 172.888 - Synthetic petroleum wax.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 3 2011-04-01 2011-04-01 false Synthetic petroleum wax. 172.888 Section 172.888... CONSUMPTION Multipurpose Additives § 172.888 Synthetic petroleum wax. Synthetic petroleum wax may be safely used in or on foods in accordance with the following conditions: (a) Synthetic petroleum wax is...

  11. Chromosomes and clinical anatomy.

    PubMed

    Gardner, Robert James McKinlay

    2016-07-01

    Chromosome abnormalities may cast light on the nature of mechanisms whereby normal anatomy evolves, and abnormal anatomy arises. Correlating genotype to phenotype is an exercise in which the geneticist and the anatomist can collaborate. The increasing power of the new genetic methodologies is enabling an increasing precision in the delineation of chromosome imbalances, even to the nucleotide level; but the classical skills of careful observation and recording remain as crucial as they always have been. Clin. Anat. 29:540-546, 2016. © 2016 Wiley Periodicals, Inc.

  12. Ki-67 acts as a biological surfactant to disperse mitotic chromosomes.

    PubMed

    Cuylen, Sara; Blaukopf, Claudia; Politi, Antonio Z; Müller-Reichert, Thomas; Neumann, Beate; Poser, Ina; Ellenberg, Jan; Hyman, Anthony A; Gerlich, Daniel W

    2016-07-14

    Eukaryotic genomes are partitioned into chromosomes that form compact and spatially well-separated mechanical bodies during mitosis. This enables chromosomes to move independently of each other for segregation of precisely one copy of the genome to each of the nascent daughter cells. Despite insights into the spatial organization of mitotic chromosomes and the discovery of proteins at the chromosome surface, the molecular and biophysical bases of mitotic chromosome structural individuality have remained unclear. Here we report that the proliferation marker protein Ki-67 (encoded by the MKI67 gene), a component of the mitotic chromosome periphery, prevents chromosomes from collapsing into a single chromatin mass after nuclear envelope disassembly, thus enabling independent chromosome motility and efficient interactions with the mitotic spindle. The chromosome separation function of human Ki-67 is not confined within a specific protein domain, but correlates with size and net charge of truncation mutants that apparently lack secondary structure. This suggests that Ki-67 forms a steric and electrostatic charge barrier, similar to surface-active agents (surfactants) that disperse particles or phase-separated liquid droplets in solvents. Fluorescence correlation spectroscopy showed a high surface density of Ki-67 and dual-colour labelling of both protein termini revealed an extended molecular conformation, indicating brush-like arrangements that are characteristic of polymeric surfactants. Our study thus elucidates a biomechanical role of the mitotic chromosome periphery in mammalian cells and suggests that natural proteins can function as surfactants in intracellular compartmentalization.

  13. Ki-67 acts as a biological surfactant to disperse mitotic chromosomes

    PubMed Central

    Cuylen, Sara; Blaukopf, Claudia; Politi, Antonio Z.; Müller-Reichert, Thomas; Neumann, Beate; Poser, Ina; Ellenberg, Jan; Hyman, Anthony A.; Gerlich, Daniel W.

    2016-01-01

    Summary Eukaryotic genomes are partitioned into chromosomes, which during mitosis form compact and spatially well-separated mechanical bodies1–3.This enables chromosomes to move independently of each other for segregation of precisely one copy of the genome to each of the nascent daughter cells. Despite insights into the spatial organization of mitotic chromosomes4 and the discovery of proteins at the chromosome surface3,5,6, the molecular and biophysical basis of mitotic chromosome individuality have remained unclear. We report that Ki-67, a component of the mitotic chromosome periphery, prevents chromosomes from collapsing into a single chromatin mass after nuclear envelope disassembly, thus enabling independent chromosome motility and efficient interactions with the mitotic spindle. The chromosome separation function of Ki-67 is not confined within a specific protein domain but correlates with size and net charge of truncation mutants that apparently lack secondary structure. This suggests that Ki-67 forms a steric and electrical barrier, similar to surface-active agents (surfactants) that disperse particles or phase-separated liquid droplets in solvents. Fluorescence correlation spectroscopy showed a high surface density of Ki-67 and dual-color labeling of both protein termini revealed an extended molecular conformation, indicating brush-like arrangements that are characteristic for polymeric surfactants. Our study thus elucidates a biomechanical role of the mitotic chromosome periphery and suggests that natural proteins can function as surfactants in intracellular compartmentalization. PMID:27362226

  14. Petroleum potential of the Upper Ordovician Maquoketa Group in Illinois: A coordinated geological and geochemical study

    SciTech Connect

    Crockett, J.E.; Oltz, D.F. ); Kruge, M.A. )

    1990-05-01

    The Ordovician Maquoketa Group in Illinois, predominantly composed of shale, calcareous shale, and carbonates, has long been considered a potential source for Illinois basin hydrocarbons. Methods used to better define the petroleum potential of the Maquoketa in the Illinois basin were lithostratigraphic study, Rock-Eval (pyrolysis) analyses, comparison of molecular markers from whole-rock extracts and produced oil, and construction of burial history models. Organic-rich submature Maquoketa potential source rocks are present in western Illinois at shallow depths on the basin flank. Deeper in the basin in southern Illinois, Rock-Eval analyses indicate that the Maquoketa shale is within the oil window. Solvent extracts of the Maquoketa from western Illinois closely resemble the Devonian New Albany Shale, suggesting that past studies may have erroneously attributed Maquoketa-generated petroleum to a New Albany source or failed to identify mixed source oils. Subtle differences between Maquoketa and New Albany solvent extracts include differences in pristane/phytane ratios, proportions of steroids, and distribution of dimethyldibenzothiophene isomers. Maquoketa solvent extracts show little resemblance to Middle Ordovician oils from the Illinois or Michigan basins. Lithostratigraphic studies identified localized thick carbonate facies in the Maquoketa, suggesting depositional response to upper Ordovician paleostructures. Sandstone facies in the Maquoketa in southwestern Illinois offer a potential source/trap play, as well as serving as potential carrier beds for hydrocarbon migration. Maquoketa source and carrier beds may feed older Ordovician rocks in faulted areas along and south of the Cottage Grove fault system in southern Illinois.

  15. Features of the carbonization of compositions of uncalcined petroleum coke with hard-coal pitch

    SciTech Connect

    Drovetskaya, L.A.; Lukina, E.Yu.; Tsarev, V.Ya.

    1981-01-01

    In the reported experiments, the influence of an inhomogeneity of the filler and its treatment with organic solvents on the process of carbonizing coke-pitch compositions has been investigated. Uncalcined petroleum coke of type KNPS (GOST 22898-78) and medium-temperature hard-coal pitch of type A (COST 10200-73) were used as raw materials. It is shown that the inhomogeneity of the properties of uncalcined petroleum coke obtained by the pot-still method permit the appearance of differences in the mesophase conditions at the final stage of formation of the coke, the larger are the spherical elements of the mesophase before their fusion into a continuous matrix. 7 refs.

  16. Control of molecular weight distribution of petroleum pitches via multistage supercritical extraction

    SciTech Connect

    Cervo, Eduardo; Thies, Mark C

    2010-01-01

    Packed-column supercritical extraction (SCE), followed by low-pressure gas stripping, was used to produce a dimer-rich pitch fraction from an oligomeric petroleum pitch, Marathon M-50, of broad molecular weight distribution (MWD). Both solvent-to-pitch ratios (S/P) >5 and a positive retrograde temperature gradient of 380 330 C at 70 bar were found to reduce significantly the amount of trimer+ oligomers in the overhead product from the SCE column. This monomer- and dimer-rich overhead was subsequently stripped of monomer with gaseous toluene in a second packed column at 380 C and 1.5 bar to obtain an 80+ mol% dimer product with an overall yield, based on the original feed, of 30%. To our knowledge, this is the first reported fractionation of a dimer-rich cut from a petroleum pitch with a demonstrably low level of both lower and higher mol wt impurities.

  17. Characterization of chromosomal architecture in Arabidopsis by chromosome conformation capture

    PubMed Central

    2013-01-01

    Background The packaging of long chromatin fibers in the nucleus poses a major challenge, as it must fulfill both physical and functional requirements. Until recently, insights into the chromosomal architecture of plants were mainly provided by cytogenetic studies. Complementary to these analyses, chromosome conformation capture technologies promise to refine and improve our view on chromosomal architecture and to provide a more generalized description of nuclear organization. Results Employing circular chromosome conformation capture, this study describes chromosomal architecture in Arabidopsis nuclei from a genome-wide perspective. Surprisingly, the linear organization of chromosomes is reflected in the genome-wide interactome. In addition, we study the interplay of the interactome and epigenetic marks and report that the heterochromatic knob on the short arm of chromosome 4 maintains a pericentromere-like interaction profile and interactome despite its euchromatic surrounding. Conclusion Despite the extreme condensation that is necessary to pack the chromosomes into the nucleus, the Arabidopsis genome appears to be packed in a predictive manner, according to the following criteria: heterochromatin and euchromatin represent two distinct interactomes; interactions between chromosomes correlate with the linear position on the chromosome arm; and distal chromosome regions have a higher potential to interact with other chromosomes. PMID:24267747

  18. Petroleum supply annual, 1997. Volume 2

    SciTech Connect

    1998-06-01

    The Petroleum Supply Annual (PSA) contains information on the supply and disposition of crude oil and petroleum products. The publication reflects data that were collected from the petroleum industry during 1997 through monthly surveys. The PSA is divided into two volumes. The first volume contains three sections: Summary Statistics, Detailed Statistics, and Refinery Statistics; each with final annual data. The second volume contains final statistics for each month of 1997, and replaces data previously published in the Petroleum Supply Monthly (PSM). The tables in Volumes 1 and 2 are similarly numbered to facilitate comparison between them. Explanatory Notes, located at the end of this publication, present information describing data collection, sources, estimation methodology, data quality control procedures, modifications to reporting requirements and interpretation of tables. Industry terminology and product definitions are listed alphabetically in the Glossary. 35 tabs.

  19. Petroleum supply annual 1995: Volume 2

    SciTech Connect

    1996-06-01

    The Petroleum Supply Annual (PSA) contains information on the supply and disposition of crude oil and petroleum products. The publication reflects data that were collected from the petroleum industry during 1995 through monthly surveys. The PSA is divided into two volumes. This first volume contains three sections: Summary Statistics, Detailed Statistics, and selected Refinery Statistics each with final annual data. The second volume contains final statistics for each month of 1995, and replaces data previously published in the Petroleum Supply Monthly (PSM). The tables in Volumes 1 and 2 are similarly numbered to facilitate comparison between them. Explanatory Notes, located at the end of this publication, present information describing data collection, sources, estimation methodology, data quality control procedures, modifications to reporting requirements and interpretation of tables. Industry terminology and product definitions are listed alphabetically in the Glossary.

  20. Slides for Petroleum Refinery Fenceline Monitoring Data

    EPA Pesticide Factsheets

    These webinars provided an overview of EPA’s 2015 rule to reduce air emissions from petroleum refineries and solicit input on how to display the information collected from fenceline monitors at refineries.

  1. Petroleum supply annual 1998: Volume 2

    SciTech Connect

    1999-06-01

    The Petroleum Supply Annual (PSA) contains information on the supply and disposition of crude oil and petroleum products. The publication reflects data that were collected from the petroleum industry during 1998 through monthly surveys. The PSA is divided into two volumes. The first volume contains three sections: Summary Statistics, Detailed Statistics, and Refinery Statistics; each with final annual data. This second volume contains final statistics for each month of 1998, and replaces data previously published in the Petroleum Supply Monthly (PSM). The tables in Volumes 1 and 2 are similarly numbered to facilitate comparison between them. Explanatory Notes, located at the end of this publication, present information describing data collection, sources, estimation methodology, data quality control procedures, modifications to reporting requirements and interpretation of tables. Industry terminology and product definitions are listed alphabetically in the Glossary. 35 tabs.

  2. Petroleum supply annual 1994, Volume 2

    SciTech Connect

    1995-06-01

    The Petroleum Supply Annual (PSA) contains information on the supply and disposition of crude oil and petroleum products. The publication reflects data that were collected from the petroleum industry during 1994 through annual and monthly surveys. The PSA is divided into two volumes. This first volume contains four sections: Summary Statistics, Detailed Statistics, Refinery Capacity, and Oxygenate Capacity each with final annual data. The second volume contains final statistics for each month of 1994, and replaces data previously published in the Petroleum Supply Monthly (PSM). The tables in Volumes 1 and 2 are similarly numbered to facilitate comparison between them. Explanatory Notes, located at the end of this publication, present information describing data collection, sources, estimation methodology, data quality control procedures, modifications to reporting requirements and interpretation of tables. Industry terminology and product definitions are listed alphabetically in the Glossary.

  3. SYSTEMS CHEMICAL ANALYSIS OF PETROLEUM POLLUTANTS

    EPA Science Inventory

    The application of an established mathematical treatment useful for the characterization and identification of petroleum pollutants is described. Using discriminant analysis of relevant infrared spectrophotometric data, 99% of numerous known and unknown oil samples have been corr...

  4. Petroleum supply annual 1996: Volume 2

    SciTech Connect

    1997-06-01

    The Petroleum Supply Annual (PSA) contains information on the supply and disposition of crude oil and petroleum products. The publication reflects data that were collected from the petroleum industry during 1996 through monthly surveys. The PSA is divided into two volumes. The first volume contains three sections: Summary Statistics, Detailed Statistics, and Refinery Capacity; each with final annual data. The second volume contains final statistics for each month of 1996, and replaces data previously published in the Petroleum Supply Monthly (PSM). The tables in Volumes 1 and 2 are similarly numbered to facilitate comparison between them. Explanatory Notes, located at the end of this publication, present information describing data collection, sources, estimation methodology, data quality control procedures, modifications to reporting requirements and interpretation of tables. Industry terminology and product definitions are listed alphabetically in the Glossary. 35 tabs.

  5. Petroleum and Individual polycyclic aromatic hydrocarbons

    USGS Publications Warehouse

    Albers, P.H.; Hoffman, David J.; Rattner, Barnett A.; Burton, G. Allen; Cairns, John=

    2003-01-01

    A general treatment of petroleum and PAHs including presentations on composition and characteristics, sources, environmental fate, and effects on plants, invertebrates, fish, reptiles and amphibians, birds, and mammals. A revision of the 1995 book chapter of the same title.

  6. Natural analogs in the petroleum industry

    SciTech Connect

    Wood, J.R.

    1995-09-01

    This article describes the use of natural analogues in petroleum exploration and includes numerous geologic model descriptions which have historically been used in the prediction of geometries and location of oil and gas accumulations. These geologic models have been passed down to and used by succeeding generations of petroleum geologists. Some examples of these geologic models include the Allan fault-plane model, porosity prediction, basin modelling, prediction of basin compartmentalization, and diagenesis.

  7. Guam Transportation Petroleum-Use Reduction Plan

    SciTech Connect

    Johnson, C.

    2013-04-01

    The island of Guam has set a goal to reduce petroleum use 20% by 2020. Because transportation is responsible for one-third of on-island petroleum use, the Guam Energy Task Force (GETF), a collaboration between the U.S. Department of Energy and numerous Guam-based agencies and organizations, devised a specific plan by which to meet the 20% goal within the transportation sector. This report lays out GETF's plan.

  8. Chromosome Variations And Human Behavior

    ERIC Educational Resources Information Center

    Soudek, D.

    1974-01-01

    Article focused on the science of cytogenetics, which studied the transmission of the units of heredity called chromosomes, and considered the advantage of proper diagnosis of genetic diseases, treated on the chromosomal level. (Author/RK)

  9. Chromosomes, cancer and radiosensitivity

    SciTech Connect

    Samouhos, E.

    1983-08-01

    Some specific chromosomal abnormalities are associated with certain cancers. The earliest description of such a specific association is the one of the Philadelphia chromosome and myelogenous leukemia (1960). Other congenital karyotype abnormalities are associated with specific cancers. Examples of these are Down's syndrome with leukemia and Klinefelter's syndrome with male breast cancer. Genetic diseases of increased chromosome breakage, or of defective chromosome repair, are associated with greatly increased cancer incidence. Three such diseases have been recognized: 1) Fanconi's anemia, associated with leukemias and lymphomas, 2) Bloom's syndrome, associated with acute leukemias and lymphosarcoma, and 3) ataxia telangiectasia, associated with Hodgkin's disease, leukemia, and lymphosarcomas. Ten percent of individuals with ataxia telangiectasia will develop one of these neoplasms. Individuals with certain of these syndromes display an unusually high radiosensitivity. Radiation therapy for cancers has been fatal in patients who received as low as 3000 rad. This remarkable radiosensitivity has been quantitated in cell cultures from such cases. Evidence suggests that the apparent sensitivity may reflect subnormal ability to repair radiation damage. The rapid proliferation of information in this field stems from the interdigitation of many disciplines and specialties, including cytogenetics, cell biology, molecular biology, epidemiology, radiobiology, and several others. This paper is intended for clinicians; it presents a structured analytic scheme for correlating and classifying this multidisciplinary information as it becomes available.

  10. Why Chromosome Palindromes?

    PubMed Central

    Betrán, Esther; Demuth, Jeffery P.; Williford, Anna

    2012-01-01

    We look at sex-limited chromosome (Y or W) evolution with particular emphasis on the importance of palindromes. Y chromosome palindromes consist of inverted duplicates that allow for local recombination in an otherwise nonrecombining chromosome. Since palindromes enable intrachromosomal gene conversion that can help eliminate deleterious mutations, they are often highlighted as mechanisms to protect against Y degeneration. However, the adaptive significance of recombination resides in its ability to decouple the evolutionary fates of linked mutations, leading to both a decrease in degeneration rate and an increase in adaptation rate. Our paper emphasizes the latter, that palindromes may exist to accelerate adaptation by increasing the potential targets and fixation rates of incoming beneficial mutations. This hypothesis helps reconcile two enigmatic features of the “palindromes as protectors” view: (1) genes that are not located in palindromes have been retained under purifying selection for tens of millions of years, and (2) under models that only consider deleterious mutations, gene conversion benefits duplicate gene maintenance but not initial fixation. We conclude by looking at ways to test the hypothesis that palindromes enhance the rate of adaptive evolution of Y-linked genes and whether this effect can be extended to palindromes on other chromosomes. PMID:22844637

  11. The Y Chromosome

    ERIC Educational Resources Information Center

    Offner, Susan

    2010-01-01

    The Y chromosome is of great interest to students and can be used to teach about many important biological concepts in addition to sex determination. This paper discusses mutation, recombination, mammalian sex determination, sex determination in general, and the evolution of sex determination in mammals. It includes a student activity that…

  12. Femtosecond transient dichroism/birefringence studies of solute- solvent friction and solvent dynamics

    SciTech Connect

    Chang, Y.J.; Castner, E.W. Jr.; Konitsky, W.; Waldeck, D.H.

    1994-02-01

    Ultrafast, heterodyne, polarization spectroscopies are used to measure solute-solvent frictional coupling and characterize the neat solvent`s relaxation dynamics on femtosecond and picosecond timescales.

  13. Indonesian petroleum systems and exploration efficiency

    SciTech Connect

    Howes, J.V.C.; Tisnawijaya, S. )

    1996-01-01

    The Republic of Indonesia has over 40 productive petroleum systems and more than 100 speculative petroleum systems. Since the first oil discoveries in the 1880's, cumulative discovered ultimately recoverable petroleum resources in Indonesia have reached 50 billion barrels of oil equivalent. There are eight principal producing areas and nearly 1,000 oil and gas fields. Most of these resources have been found in the last 50 years. Successful exploration continues; at least two discoveries per year are made which exceed 50 million barrels of oil equivalent reserves. Productive petroleum system source types are split almost equally between marine and deltaic-lacustrine facies. The majority of source rocks are Tertiary in age; Mesozoic source rocks are restricted to Eastern Indonesia. Discovery process analysis indicates generally high exploration efficiency in Indonesia. An upwardly convex discovery process curve typifies many systems, reflecting both exploration efficiency and maturity; this pattern is well displayed in areas such as Central Sumatra and Salawati. A much more random or straight line process curve, as seen in West Natuna, occurs where more complex petroleum systems have inhibited exploration efficiency. An inverted, or concave upward curve, seen in some Java petroleum systems, is probably economically driven, related to development of domestic Indonesian gas markets. Several curves, such as those for the North Sumatra:Bampo-Peutu and East Kalimantan:Tanjung systems are dominated by single fields. Different exploration phases can be recognized in many systems, each phase having its own specific exploration statistics.

  14. Indonesian petroleum systems and exploration efficiency

    SciTech Connect

    Howes, J.V.C.; Tisnawijaya, S.

    1996-12-31

    The Republic of Indonesia has over 40 productive petroleum systems and more than 100 speculative petroleum systems. Since the first oil discoveries in the 1880`s, cumulative discovered ultimately recoverable petroleum resources in Indonesia have reached 50 billion barrels of oil equivalent. There are eight principal producing areas and nearly 1,000 oil and gas fields. Most of these resources have been found in the last 50 years. Successful exploration continues; at least two discoveries per year are made which exceed 50 million barrels of oil equivalent reserves. Productive/petroleum system source types are split almost equally between marine and deltaic-lacustrine facies. The majority of source rocks are Tertiary in age; Mesozoic source rocks are restricted to Eastern Indonesia. Discovery process analysis indicates generally high exploration efficiency in Indonesia. An upwardly convex discovery process curve typifies many systems, reflecting both exploration efficiency and maturity; this pattern is well displayed in areas such as Central Sumatra and Salawati. A much more random or straight line process curve, as seen in West Natuna, occurs where more complex petroleum systems have inhibited exploration efficiency. An inverted, or concave upward curve, seen in some Java petroleum systems, is probably economically driven, related to development of domestic Indonesian gas markets. Several curves, such as those for the North Sumatra:Bampo-Peutu and East Kalimantan:Tanjung systems are dominated by single fields. Different exploration phases can be recognized in many systems, each phase having its own specific exploration statistics.

  15. Biogenically formed petroleum should be considered

    SciTech Connect

    Roach, J.W.

    1987-06-01

    This article argues that the currently popular thermal maturation theory for source beds holds that significant quantities of petroleum (oil and/or gas that can be produced, captured and used as fuel or feedstock) cannot be generated at temperatures less than about 200/sup 0/F, which typically require burial depths of about 10,000 ft. On the contrary, physical geologic evidence often indicates that petroleum was generated within a few hundred feet vertically (stratigraphically) of its present occurrence and at significantly lower temperatures and shallower depths than held by thermal maturation theory. Further, it is known that at least some methane (such as ''swamp gas'') can be derived from immature sources; these are commonly called biogenic gases. So, perhaps most petroleum is formed under this old concept of biogenic petroleum, aided, but not limited by, the heating of kerogens. That is, perhaps most petroleum is produced by the activities of bacteria, and/or other life forms, on the remains of plants and animals. Certainly both procedures can produce petroleum; there is no need to universally accept one an reject the other.

  16. Asphaltenes: The cholesterol of petroleum

    SciTech Connect

    Kokal, S.L.; Sayegh, S.G.

    1995-11-01

    Asphaltene precipitation and deposition has been recognized to be a significant problem in oil production, transmission,and processing facilities. The precipitation of asphaltenes is cause by a number of factors including changes in pressure, temperature, chemical composition of the crude oil, mixing the oil with diluents or other oils, and during acid stimulation. The precipitated asphaltenes reduces the permeability of the reservoir near the well-bore region causing formation damage and can plug-up the well-bores and well tubings. Deposition of asphaltenic organic scales leads to operational problems, safety hazards and an overall decrease in production efficiency, thereby increasing the cost of oil production. This paper presents a review of the important factors which affect asphaltene precipitation in petroleum reservoirs and in processing facilities. The nature and characteristics of asphaltenes in the crude oil and their molecular and colloidal properties are discussed. A description of the asphaltene deposition problem manifestations in the reservoir, well bores and well tubings, processing and transportation equipment is presented. current research work in this area is also discussed.

  17. Petroleum geology of east Siberia

    SciTech Connect

    Clarke, J.W. )

    1991-03-01

    Two oil-gas provinces are present in East Siberia: the Lena-Tunguska in the central, southern, and western parts, and the Khatanga-Viluy along the northern and eastern margins. The provinces developed as rift-sag features in late Proterozoic and Paleozoic time. The identified oil and gas deposits of the Lena-Tunguska province appear to be associated with a Proterozoic rift that extends east-northeast across the southern part of the basin. These deposits are in upper Proterozoic and Cambrian sandstones and carbonate rocks, sealed by Cambrian salt and argillites. The oil and gas deposits of the Khatanga-Vilyuy province are within foreland downwarps that developed in connection with docking of crustal plates during the Mesozoic: during the Triassic on the north and during the Cretaceous on the east. The source of the petroleum in the immature rocks of the southeastern Lena-Tunguska province is uncertain, perhaps being derived from rocks in a downwarp to the south or from source beds that are now beneath a conjectured thrust sheet. This province has both oil and gas pools, but is gas prone in general. The source beds for the Khatanga-Vilyuy province are Permian and Mesozoic in age; the province is gas prone. More than 40 oil and gas fields have now been discovered in East Siberia.

  18. [Dicentric Y chromosome].

    PubMed

    Abdelmoula, N Bouayed; Amouri, A

    2005-01-01

    Dicentric Y chromosomes are the most common Y structural abnormalities and their influence on gonadal and somatic development is extremely variable. Here, we report the third comprehensive review of the literature concerning dicentric Y chromosomes reported since 1994. We find 78 new cases for which molecular studies (PCR or FISH) have been widely applied to investigate SRY (68% of cases), GBY, ZFY, RFS4Y, GCY and different genes at AZF region. For dic(Yq), all cases (n = 20) were mosaic for 45,X and 4 of them were also mosaic for a 46,XY cell line. When breakpoints were available (15/20 cases), they were in Yp11. 50% of cases were phenotypic female and 20% phenotypic male while 20% of cases were reported with gonadal dysgenesis. Gonadal histology was defined in 8 cases but only in one case, gonadal tissu was genetically investigated because of gonadoblastoma. For dic(Yp) (n = 55), mosaicism concerned only 45,X cell line and was found in 50 cases while the remainder five cases were homogeneous. When breakpoints were available, it was at Yq11 in 50 cases and at Yq12 in two cases. 54% of cases were phenotypic female, 26% were phenotypic male and 18% were associated with genitalia ambiguous. SRY was analyzed in 33 cases, sequenced in 9 cases and was muted in only one case. Gonads were histologically explored in 34 cases and genetically investigated in 8 cases. Gonadoblastoma was found in only two cases. Through this review, it seems that phenotype-genotype correlations are still not possible and that homogeneous studies of dic(Y) in more patients using molecular tools for structural characterization of the rearranged Y chromosome and assessment of mosaicism in many organs are necessary to clarify the basis of the phenotypic heterogeneity of dicentric Y chromosomes and then to help phenotypic prediction of such chromosome rearrangement.

  19. SOLVENT EXTRACTION OF URANIUM VALUES

    DOEpatents

    Feder, H.M.; Ader, M.; Ross, L.E.

    1959-02-01

    A process is presented for extracting uranium salt from aqueous acidic solutions by organic solvent extraction. It consists in contacting the uranium bearing solution with a water immiscible dialkylacetamide having at least 8 carbon atoms in the molecule. Mentioned as a preferred extractant is dibutylacetamide. The organic solvent is usually used with a diluent such as kerosene or CCl/sub 4/.

  20. Supercritical multicomponent solvent coal extraction

    NASA Technical Reports Server (NTRS)

    Corcoran, W. H.; Fong, W. S.; Pichaichanarong, P.; Chan, P. C. F.; Lawson, D. D. (Inventor)

    1983-01-01

    The yield of organic extract from the supercritical extraction of coal with larger diameter organic solvents such as toluene is increased by use of a minor amount of from 0.1 to 10% by weight of a second solvent such as methanol having a molecular diameter significantly smaller than the average pore diameter of the coal.

  1. Experimental study of the combined calcination and hydrodesulfurization of high-sulfur green petroleum coke

    NASA Astrophysics Data System (ADS)

    Kilic, Saliha Meltem

    The primary production of aluminum is done by means of the Hall-Heroult process where large amounts of carbon anodes are required and consumed. The quality of carbon anodes used in electrolysis is one of the most important parameters affecting the production of primary aluminum. The anode quality widely depends on the raw materials, one of which is the petroleum coke. Green petroleum coke is produced from the heavy residual fractions of petroleum. Petroleum cokes produced from sour crude oil sources contain high quantity of sulfur. A certain level of sulfur is needed to reduce the anode reactivities; however, the demand for anode-grade coke with acceptable sulfur content is increasing faster than the available supply. High sulfur levels in carbon anodes would have an adverse effect on environment; hence, the desulfurization of high sulfur green petroleum cokes is necessary. There are different ways of desulfurizing green petroleum cokes: solvent extraction, thermal desulfurization, and hydrodesulfurization. Coke produced by solvent extraction is prone to contamination. The thermal approach requires greater energy consumption and causes an increase in coke porosity. The global objective of this master project is to find an alternative solution for desulfurization that will produce quality calcined coke with minimum impact on environment. Hydrodesulfurization seems to be a viable option and was investigated in this study. Water was used for the hydrodesulfurization of commercially available high sulfur green petroleum coke. Different experimental systems were tried during the hydrodesulfurization experiments. A systematic approach was used to investigate the influence of hydrodesulfurization parameters including water injection temperature, duration, and water flow rate as well as coke particle size on the hydrodesulfurization of green petroleum coke. In addition to hydrodesulfurization, a number of thermal desulfurization experiments were carried out with the same

  2. Solvent degradation products in nuclear fuel processing solvents

    SciTech Connect

    Shook, H.E. Jr.

    1988-06-01

    The Savannah River Plant uses a modified Purex process to recover enriched uranium and separate fission products. This process uses 7.5% tri-n-butyl phosphate (TBP) dissolved in normal paraffin hydrocarbons for the solvent extraction of a nitric acid solution containing the materials to be separated. Periodic problems in product decontamination result from solvent degradation. A study to improve process efficiency has identified certain solvent degradation products and suggested mitigation measures. Undecanoic acid, lauric acid, and tridecanoic acid were tentatively identified as diluent degradation products in recycle solvent. These long-chain organic acids affect phase separation and lead to low decontamination factors. Solid phase extraction (SPE) was used to concentrate the organic acids in solvent prior to analysis by high performance liquid chromatography (HPLC). SPE and HPLC methods were optimized in this work for analysis of decanoic acid, undecanoic acid, and lauric acid in solvent. Accelerated solvent degradation studies with 7.5% TBP in normal paraffin hydrocarbons showed that long-chain organic acids and long-chain alkyl butyl phosphoric acids are formed by reactions with nitric acid. Degradation of both tributyl phosphate and hydrocarbon can be minimized with purified normal paraffin replacing the standard grade presently used. 12 refs., 1 fig., 3 tabs.

  3. Switchable Polarity Solvents: Are They Green?

    NASA Astrophysics Data System (ADS)

    Plaumann, Heinz

    2017-03-01

    Solvents play an incredibly important role in large scale chemical reactions. Switchable polarity solvents may prove to be a class of solvent that offers energy and material efficiencies greater than existing solvents. This paper examines such solvents and their potential in a variety of chemical reactions.

  4. COMPUTER AIDED SOLVENT DESIGN FOR THE ENVIRONMENT

    EPA Science Inventory

    Solvent substitution is an effective and useful means of eliminating the use of harmful solvents, but finding substitute solvents which are less harmful and as effective as currently used solvents presents significant difficulties. Solvent substitution is a form of reverse engin...

  5. Biodiesel production from ethanolysis of DPO using deep eutectic solvent (DES) based choline chloride - ethylene glycol as co-solvent

    NASA Astrophysics Data System (ADS)

    Taslim, Indra, Leonardo; Manurung, Renita; Winarta, Agus; Ramadhani, Debbie Aditia

    2017-03-01

    Biodiesel is usually produced from transesterification using methanol or ethanol as alcohol. However, biodiesel produced using methanol has several disadvantages because methanol is toxic and not entirely bio-based as it is generally produced from petroleum, natural gas and coal. On the other hand, ethanol also has several disadvantages such as lower reactivity in transesterification process and formation of stable emulsion between ester and glycerol. To improve ethanolysis process, deep eutectic solvent (DES) was prepared from choline chloride and ethylene glycol to be used as co-solvent in ethanolysis. Deep eutectic solvent was prepared by mixing choline chloride and ethylene glycol at molar ratio of 1:2, temperature of 80 °C, and stirring speed of 300 rpm for 1 hour. The DES was characterized by its density and viscosity. The ethanolysis of DPO / Degummed Palm Oil was performed at 70 °C, ethanol to oil molar ratio of 9:1, catalyst (potassium hydroxide) concentration of 0.75 wt.% concentration, co-solvent (DES) concentration of 1, 2, 3, 4, 5 and 6 wt.%, stirring speed of 600 rpm, and reaction time of 1 hour. The obtained biodiesel was then characterized by its density, viscosity and ester content. The oil - ethanol phase condition was observed in reaction tube. The oil - ethanol phase with DES tends to form meniscus compared to that without DES. Which implied that oil and ethanol become more slightly miscible, which favours the reaction. Using DES as co-solvent in ethanolysis resulted in an increase in yield and easier purification. The esters properties met the international standards ASTM D6751, with highest yield achieved at 81.72 % with 99.35 % ethyl ester contents at 4% DES concentration.

  6. [Chromosomal organization of the genomes of small-chromosome plants].

    PubMed

    Muravenko, O V; Zelenin, A V

    2009-11-01

    An effective approach to study the chromosome organization in genomes of plants with small chromosomes and/or with low-informative C-banding patterns was developed in the course of investigation of the karyotypes of cotton plant, camomile, flax, and pea. To increase the resolving power of chromosome analysis, methods were worked out for revealing early replication patterns on chromosomes and for artificial impairment of mitotic chromosome condensation with the use of a DNA intercalator, 9-aminoacridine (9-AMA). To estimate polymorphism of the patterns of C-banding of small chromosomes on preparations obtained with the use of 9-AMA, it is necessary to choose a length interval that must not exceed three average sizes of metaphase chromosomes without the intercalator. The use of 9-AMA increases the resolution of differential C- and OR-banding and the precision of physical chromosome mapping by the FISH method. Of particular importance in studying small chromosomes is optimization of the computer-aided methods used to obtain and process chromosome images. The complex approach developed for analysis of the chromosome organization in plant genomes was used to study the karyotypes of 24 species of the genus Linum L. It permitted their chromosomes to be identified for the first time, and, in addition, B chromosomes were discovered and studied in the karyotypes of the species of the section Syllinum. By similarity of the karyotypes, the studied flax species were distributed in eight groups in agreement with the clusterization of these species according to the results of RAPD analysis performed in parallel. Systematic positions and phylogenetic relationships of the studied flax species were verified. Out results can serve as an important argument in favour of the proposal to develop a special program for sequencing the genome of cultivated flax (L. usitatissimum L.), which is a major representative of small-chromosome species.

  7. Mortality and cancer morbidity in a cohort of Canadian petroleum workers

    PubMed Central

    Lewis, R; Schnatter, A; Drummond, I; Murray, N; Thompson, F; Katz, A; Jorgensen, G; Nicolich, M; Dahlman, D; Theriault, G

    2003-01-01

    Aims: To assess mortality and cancer morbidity in Canadian petroleum workers and explore exposure-response relations for specific petroleum agents. Methods: A total of 25 292 employees hired between 1964 and 1994 were linked to the Canadian tumour registry and national mortality database. Exposure-response trends were assessed for hydrocarbon solvents/fuels, hydrocarbon lubricants, petroleum coke/spent catalyst, and hydrogen sulphide (H2S). Results: External comparison analyses (mortality and incidence) showed deficits for all causes and all malignant neoplasms combined and were consistent with expectation for most malignant and non-malignant sites analysed. Gall bladder cancer mortality was increased among males based on four deaths, but cases had no common job assignments and the increase was focused in workers employed <10 years. Mesothelioma incidence was increased. Most exposure-specific analyses were compromised by small numbers. Statistically significant increases were observed for H2S exposure and a subgroup of accidental deaths as well as for petroleum coke/spent catalyst exposure and lung cancer. While both findings have a degree of biologic plausibility, the H2S association, which exhibited a clearer exposure-response pattern, could be subject to unmeasured confounders. Additionally, interpretation was complicated by the high correlation between hydrocarbon and H2S exposures. With regard to lung cancer, the analysis could not adequately control for smoking, was based on small numbers, and exhibited a tenuous exposure-response pattern. Conclusion: The findings for mesothelioma suggest the need for continued attention to asbestos in the petroleum industry. The relation between accidental deaths and H2S exposure deserves closer scrutiny in similarly exposed populations. Further analyses of lung cancer are underway and will be reported separately. PMID:14634182

  8. Petroleum and the Environment: Teaching about Petroleum and the Future of Energy Resources

    ERIC Educational Resources Information Center

    Hudson, Travis; Camphire, Geoffrey

    2005-01-01

    Students live in a world that is powered by petroleum and other energy resources to an unsurpassed degree. The United States today consumes more than 24% of all the energy used in the world--and about 60% of this energy is provided by petroleum (oil and natural gas). The availability of abundant, inexpensive energy is the main reason that the…

  9. Degeneration of a Nonrecombining Chromosome

    NASA Astrophysics Data System (ADS)

    Rice, William R.

    1994-01-01

    Comparative studies suggest that sex chromosomes begin as ordinary autosomes that happen to carry a major sex determining locus. Over evolutionary time the Y chromosome is selected to stop recombining with the X chromosome, perhaps in response to accumulation of alleles beneficial to the heterogametic but harmful to the homogametic sex. Population genetic theory predicts that a nonrecombining Y chromosome should degenerate. Here this prediction is tested by application of specific selection pressures to Drosophila melanogaster populations. Results demonstrate the decay of a nonrecombining, nascent Y chromosome and the capacity for recombination to ameliorate such decay.

  10. Petroleum supply monthly with data for March 1997

    SciTech Connect

    1997-05-01

    The Petroleum Supply Monthly (PSM) is one of a family of four publications produced by the Petroleum Supply Division within the Energy Information Administration reflecting different levels of data timeliness and completeness. Data presented in the PSM describe the supply and disposition of petroleum products in the United States and major U.S. geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 states and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States.

  11. Petroleum supply monthly, May 1998, with data for March 1998

    SciTech Connect

    1998-05-01

    The Petroleum Supply Monthly (PSM) is one of a family of four publications produced by the Petroleum Supply Division within the Energy Information Administration (EIA) reflecting different levels of data timeliness and completeness. Data presented in the PSM describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States. 16 figs., 66 tabs.

  12. Petroleum supply monthly with data from January 1998

    SciTech Connect

    1998-03-01

    The Petroleum Supply Monthly (PSM) is one of a family of four publications produced by the Petroleum Supply Division within the Energy Information Administration (EIA) reflecting different levels of data timeliness and completeness. Data presented in the PSM describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States.

  13. Petroleum marketing monthly, June 1999, with data for March 1999

    SciTech Connect

    1999-06-01

    The Petroleum Marketing Monthly (PMM) provides information and statistical data on a variety of crude oils and refined petroleum products. The publication presents statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the f.o.b. and landed cost of imported crude oil, and the refiners` acquisition cost of crude oil. Refined petroleum product sales data include motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane. Monthly statistics on purchases of crude oil and sales of petroleum products are presented in the Petroleum Marketing Monthly in five sections: Initial Estimates; Summary Statistics; Crude Oil Prices; Prices of Petroleum Products; Volumes of Petroleum Products; and Prime Supplier Sales Volumes of Petroleum Products for Local Consumption. 7 figs., 50 tabs.

  14. Petroleum marketing monthly, May 1999, with data for February 1999

    SciTech Connect

    1999-05-01

    The Petroleum Marketing Monthly (PMM) provides information and statistical data on a variety of crude oils and refined petroleum products. The publication presents statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the f.o.b. and landed cost of imported crude oil, and the refiners` acquisition cost of crude oil. Refined petroleum product sales data include motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane. Monthly statistics on purchases of crude oil and sales of petroleum products are presented in the Petroleum Marketing Monthly in five sections: Initial Estimates; Summary Statistics; Crude Oil Prices; Prices of Petroleum Products; Volumes of Petroleum Products; and Prime Supplier Sales Volumes of Petroleum Products for Local Consumption. 7 figs., 50 tabs.

  15. Petroleum marketing monthly, November 1998, with data for August 1998

    SciTech Connect

    1998-11-01

    The Petroleum Marketing Monthly (PMM) provides information and statistical data on a variety of crude oils and refined petroleum products. The publication presents statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the f.o.b. and landed cost of imported crude oil, and the refiners` acquisition cost of crude oil. Refined petroleum product sales data include motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane. Monthly statistics on purchases of crude oil and sales of petroleum products are presented in the Petroleum Marketing Monthly in five sections: Summary statistics; Crude oil prices; Prices of petroleum products; Volumes of petroleum products; and Prime supplier sales volumes of petroleum products for local consumption. 7 figs., 50 tabs.

  16. Petroleum marketing monthly, June 1998, with data from March 1998

    SciTech Connect

    1998-06-01

    The Petroleum Marketing Monthly (PMM) provides information and statistical data on a variety of crude oils and refined petroleum products. The publication presents statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the f.o.b. and landed cost of imported crude oil, and the refiners` acquisition cost of crude oil. Refined petroleum product sales data include motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane. Monthly statistics on purchases of crude oil and sales of petroleum products are presented in the Petroleum Marketing Monthly in five sections: summary statistics; crude oil prices; prices of petroleum products; volumes of petroleum products and prime supplier sales volumes of petroleum products for local consumption. 7 figs., 50 tabs.

  17. Petroleum marketing monthly, December 1998 with data for September 1998

    SciTech Connect

    1998-12-01

    The Petroleum Marketing Monthly (PMM) provides information and statistical data on a variety of crude oils and refined petroleum products. The publication presents statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the f.o.b. and landed cost of imported crude oil, and the refiners` acquisition cost of crude oil. Refined petroleum product sales data include motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane. Monthly statistics on purchases of crude oil and sales of petroleum products are presented in the Petroleum Marketing Monthly in five sections: summary statistics; crude oil prices; prices of petroleum products; volumes of petroleum products; and prime supplier sales volumes of petroleum products for local consumption. 7 figs., 50 tabs.

  18. Petroleum marketing monthly, July 1999, with data for April 1999

    SciTech Connect

    1999-07-01

    The Petroleum Marketing Monthly (PMM) provides information and statistical data on a variety of crude oils and refined petroleum products. The publication presents statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the f.o.b. and landed cost of imported crude oil, and the refiners` acquisition cost of crude oil. Refined petroleum product sales data include motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane. Monthly statistics on purchases of crude oil and sales of petroleum products are presented in the Petroleum Marketing Monthly in five sections: initial estimates; summary statistics; crude oil prices; prices of petroleum products; volumes of petroleum products; and prime supplier sales volumes of petroleum products for local consumption. 7 figs., 70 tabs.

  19. Petroleum marketing monthly: August 1998, with data for May 1998

    SciTech Connect

    1998-08-01

    The Petroleum Marketing Monthly (PMM) provides information and statistical data on a variety of crude oils and refined petroleum products. The publication presents statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the f.o.b. and landed cost of imported crude oil, and the refiners` acquisition cost of crude oil. Refined petroleum product sales data include motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane. Monthly statistics on purchases of crude oil and sales of petroleum products are presented in the Petroleum Marketing Monthly in five sections: Summary Statistics; Crude Oil Prices; Prices of Petroleum Products; Volumes of Petroleum Products; and Prime Supplier Sales Volumes of Petroleum Products for Local Consumption. 7 figs., 50 tabs.

  20. Petroleum marketing monthly, July 1998 with data for April 1998

    SciTech Connect

    1998-07-01

    The Petroleum Marketing Monthly (PMM) provides information and statistical data on a variety of crude oils and refined petroleum products. The publication presents statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the f.o.b. and landed cost of imported crude oil, and the refiners` acquisition cost of crude oil. Refined petroleum product sales data include motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane. Monthly statistics on purchases of crude oil and sales of petroleum products are presented in the Petroleum Marketing Monthly in five sections: summary statistics; crude oil prices; prices of petroleum products; volumes of petroleum products; and prime supplier sales volumes of petroleum products for local consumption. 7 figs., 50 tabs.

  1. Petroleum geology of southwestern Ohio

    SciTech Connect

    Sitler, G.

    1987-09-01

    Approximately 250 wells have been drilled in the 22-county area comprising southwestern Ohio. Despite numerous shows from various zones, no sustained commercial production has been established. Live oil and gas shows have been reported from surface exposures of outcropping Silurian carbonates down to, and including, the Cambrian Mount Simon Sandstone. Several wells have been completed and actually produced hydrocarbons for a short period, but were subsequently abandoned. Despite the lack of established production, the area holds considerable promise as a potential oil and natural gas producing region. Gravity, magnetics, seismic, surface and source rock geochemistry, linear trace analysis, and subsurface computer mapping have all been used to study the structure, stratigraphy, and petroleum geology of the area. Basement geology is complex and has affected sedimentation patterns in the overlying Cambrian rocks. The Grenville-Central Province contact is present in the area and exhibits faulting, mineralization, and possibly plutonism. The Cambrian and Ordovician stratigraphy in the area is relatively simple, with clastics at the base, carbonates in the middle, and a thick shale capping the sequence. Several major facies changes are evident within the section. Structural geology is also fairly simple. However, local discontinuities are apparent and include Precambrian doming and faulting, reactivated faulting, and Knox unconformable surfaces. Potential reservoirs in the area include the Utica Shale, Trenton Limestone, St. Peter Sandstone, Rose Run sandstone, Knox dolomites, Kerbel sandstone, Eau Claire Sandstone, and Mount Simon Sandstone. Favorable source rock geochemistry and the abundance of hydrocarbon shows suggest favorable source rocks to be present. Many different types of traps have been observed.

  2. Petroleum geology of East Siberia

    SciTech Connect

    Clarke, J.W.

    1986-05-01

    The unmetamorphosed geologic section of the East Siberian region consists of upper Proterozoic clastic and carbonate sediments; Cambrian evaporites, carbonates, and black shales; Ordovician to permian clastic and carbonate sediments; Triassic basaltic flows and intrusives; and Jurassic and Cretaceous clastic sediments. During the Cambrian, a barrier reef extended across the region. Salt and anhydrite were deposited in the vast lagoon to the southwest behind this reef. The structure is typical of platforms; broad, gentle warps are complicated by smaller highs. The total area of East Siberia that is potentially favorable for oil and gas is 3.23 million km/sup 2/ (1.24 million mi/sup 2/). Deposits in the Lena-Tunguska province are in stratigraphic traps in Proterozoic to Cambrian clastic and carbonate sediments sealed by Cambrian salt and in anticlinal structures in areas of salt tectonics. Source beds seem to be Proterozoic. Pools in the Khatanga-Vilyuy province are in anticlines in Triassic, Jurassic, and Cretaceous clastic sedimentary rocks. Source beds are Permian carbonaceous shale. Most discoveries have been of gas; however, several fields have oil rings. The traps appear to have been filled by oil at one time. Undiscovered recoverable petroleum resources of East Siberia are assessed, at 90% probability, within the range of 2.2-14.6 billion bbl of oil and 72-278 tcf of gas. Mean estimates are 7.3 billion bbl of oil and 158 tcf of gas, respectively. Gas-hydrate deposits in the Lena-Vilyuy province, where permafrost is more than 400 m thick, are estimated to contain 27 tcf of possibly recoverable gas.

  3. SOME CHROMOSOME NUMBERS OF DRAPARNALDIA.

    PubMed

    Carroll, J W; Deason, T R

    1969-03-01

    The variability exhibited by Draparnaldia both in nature and in the laboratory makes it difficult to identify the species. The natural variability of Draparnaldia was amplified by the environmental conditions and the media used in this study. With the hope that chromosome studies would aid in taxonomic characterization by providing additional differentiating criteria, special attention was devoted to adapting techniques which could be used to determine chromosome numbers of Draparnaldia isolates. The chromosome numbers reported herein are as follows: (1) Draparnaldia glomerata, Isolate #1, isolated from Davis Falls, Montevallo, Alabama, was found to have a chromosome number of 13. (2) Draparnaldia Isolate #2, an unidentified species obtained from Anniston, Alabama, was found to have a chromosome number of 13. (3) Draparnaldia acuta, Isolate #3 from Northwood Lake, Northport, Alabama, exhibited 26 chromosomes. (4) Draparnaldia plumosa strain 423 (Indiana Culture Collection), 418/a (Cambridge) was observed to have a chromosome number of 13.

  4. Supercritical fractionation of petroleum pitches: Experiment and prediction

    NASA Astrophysics Data System (ADS)

    Zhuang, Shuzhong

    Previous work at Clemson has shown that supercritical extraction (SCE) can be used to produce liquid crystalline (i.e., mesophase) pitches of excellent quality for use as starting materials for high-performance carbon products. However, to date the full potential of such extraction processes for manipulating the molecular composition of pitches for a desired end use has yet to be realized. The goals of this project were twofold: (1) to develop equations of state (EoSs) applicable to pitch-solvent systems and to the multicomponent pitch mixtures themselves; (2) to investigate the potential of stagewise SCE for producing fractions suitable for analytical characterization studies. A thermodynamic model that incorporates the SAFT EoS, the MWD of the feed pitch, and mathematically generated pseudocomponents was developed for predicting phase compositions and extraction yields for the SCE process. Our model uses two binary parameters, which were determined by fitting a limited set of isothermal LLE data for pitch-solvent systems. SAFT was subsequently used with these parameters to successfully predict solvent-phase compositions at other extraction conditions. As originally developed, SAFT cannot predict the existence of mesophase. Thus, in collaboration with Hurt and co-workers at Brown University, we created a modification of SAFT for these liquid crystalline pitches (i.e., SAFT-LC). Using only three binary parameters, SAFT-LC was successfully used to model both the SCE step, where solvent-pitch interactions dominate, and the mesophase formation step in the dried pitch product, where pitch-pitch interactions are significant. A stagewise fractionation technique employing sequential, single-stage SCE was used to fractionate the heaviest portion of a petroleum pitch by operating at higher pressures in the LLE region. The pressure was sequentially reduced in each stage so as to precipitate out ˜5 wt % of the feed pitch in each stage. Five fractions comprising the heaviest

  5. Automated Chromosome Breakage Assessment

    NASA Technical Reports Server (NTRS)

    Castleman, Kenneth

    1985-01-01

    An automated karyotyping machine was built at JPL in 1972. It does computerized karyotyping, but it has some hardware limitations. The image processing hardware that was available at a reasonable price in 1972 was marginal, at best, for this job. In the meantime, NASA has developed an interest in longer term spaceflights and an interest in using chromosome breakage studies as a dosimeter for radiation or perhaps other damage that might occur to the tissues. This uses circulating lymphocytes as a physiological dosimeter looking for chromosome breakage on long-term spaceflights. For that reason, we have reactivated the automated karyotyping work at JPL. An update on that work, and a description of where it appears to be headed is presented.

  6. Chromosome 19 International Workshop

    SciTech Connect

    Pericak-Vance, M.A. . Medical Center); Ropers, H.H. . Dept. of Human Genetics); Carrano, A.J. )

    1993-01-04

    The Second International Workshop on Human Chromosome 19 was hosted on January 25 and 26, 1992, by the Department of Human Genetics, University Hospital Nijmegen, The Netherlands, at the 'Meerdal Conference Center'. The workshop was supported by a grant from the European Community obtained through HUGO, the Dutch Research Organization (NWO) and the Muscular Dystrophy Association (MDA). Travel support for American participants was provided by the Department of Energy. The goals of this workshop were to produce genetic, physical and integrated maps of chromosome 19, to identify inconsistencies and gaps, and to discuss and exchange resources and techniques available for the completion of these maps. The second day of the meeting was largely devoted to region or disease specific efforts. In particular, the meeting served as a platform for assessing and discussing the recent progress made into the molecular elucidation of myotonic dystrophy.

  7. Solvent extraction of lubricating oils

    SciTech Connect

    Sequeira, A. Jr.

    1991-08-13

    This patent describes improvement in a process for solvent refining a hydrocarbon based lubricating oil stock containing aromatics and non-aromatics components with an extraction solvent wherein the lubricating oil stock is contacted with the extraction solvent in a first extraction zone at a first extraction temperature in the range of 100{degrees} F to 250{degrees} F and a solvent to oil dosage in the range of 75 to 500 vol % forming an aromatics-rich primary extract and an aromatics-lean primary raffinate of high viscosity index of at least 85. The improvement comprises: withdrawing and cooling the primary extract to a temperature 10{degrees} F to 120{degrees} F below the extraction temperature and admixing with 0.0 vol % to 10 vol % anti-solvent thereby forming a secondary extract and a secondary raffinate, passing the secondary raffinate to a second extraction zone wherein the secondary raffinate is contacted with the extraction solvent at a second extraction temperature in the range of 100{degrees} F to 250{degrees} F and solvent to oil dosage in the range of 75 to 500 vol %, to form an aromatics-lean tertiary raffinate phase of viscosity index 65 or greater.

  8. Chromosomal evolution in Rodentia.

    PubMed

    Romanenko, S A; Perelman, P L; Trifonov, V A; Graphodatsky, A S

    2012-01-01

    Rodentia is the most species-rich mammalian order and includes several important laboratory model species. The amount of new information on karyotypic and phylogenetic relations within and among rodent taxa is rapidly increasing, but a synthesis of these data is currently lacking. Here, we have integrated information drawn from conventional banding studies, recent comparative painting investigations and molecular phylogenetic reconstructions of different rodent taxa. This permitted a revision of several ancestral karyotypic reconstructions, and a more accurate depiction of rodent chromosomal evolution.

  9. Construction of human chromosome 21-specific yeast artificial chromosomes

    SciTech Connect

    McCormick, M.K.; Shero, J.H.; Hieter, P.A.; Antonarakis, S.E. ); Cheung, Meichi; Kan, Yuetwai )

    1989-12-01

    Chromosome 21-specific yeast artificial chromosomes (YACs) have been constructed by a method that performs all steps in agarose, allowing size selection by pulsed-field gel electrophoresis and the use of nanogram to microgram quantities of DNA. The DNA sources used were hybrid cell line WAV-17, containing chromosome 21 as the only human chromosome and flow-sorted chromosome 21. The transformation efficiency of ligation products was similar to that obtained in aqueous transformations and yielded YACs with sizes ranging from 100 kilobases (kb) to > 1 megabase when polyamines were included in the transformation procedure. Twenty-five YACs containing human DNA have been obtained from a mouse-human hybrid, ranging in size from 200 to > 1000 kb, with an average size of 410 kb. Ten of these YACs were localized to subregions of chromosome 21 by hybridization of RNA probes to a panel of somatic cell hybrid DNA. Twenty-one human YACs, ranging in size from 100 to 500 kb, with an average size of 150 kb, were obtained from {approx} 50 ng of flow-sorted chromosome 21 DNA. Three were localized to subregions of chromosome 21. YACs will aid the construction of a physical map of human chromosome 21 and the study of disorders associated with chromosome 21 such as Alzheimer disease and Down syndrome.

  10. Interpreting Chromosome Aberration Spectra

    NASA Technical Reports Server (NTRS)

    Levy, Dan; Reeder, Christopher; Loucas, Bradford; Hlatky, Lynn; Chen, Allen; Cornforth, Michael; Sachs, Rainer

    2007-01-01

    Ionizing radiation can damage cells by breaking both strands of DNA in multiple locations, essentially cutting chromosomes into pieces. The cell has enzymatic mechanisms to repair such breaks; however, these mechanisms are imperfect and, in an exchange process, may produce a large-scale rearrangement of the genome, called a chromosome aberration. Chromosome aberrations are important in killing cells, during carcinogenesis, in characterizing repair/misrepair pathways, in retrospective radiation biodosimetry, and in a number of other ways. DNA staining techniques such as mFISH ( multicolor fluorescent in situ hybridization) provide a means for analyzing aberration spectra by examining observed final patterns. Unfortunately, an mFISH observed final pattern often does not uniquely determine the underlying exchange process. Further, resolution limitations in the painting protocol sometimes lead to apparently incomplete final patterns. We here describe an algorithm for systematically finding exchange processes consistent with any observed final pattern. This algorithm uses aberration multigraphs, a mathematical formalism that links the various aspects of aberration formation. By applying a measure to the space of consistent multigraphs, we will show how to generate model-specific distributions of aberration processes from mFISH experimental data. The approach is implemented by software freely available over the internet. As a sample application, we apply these algorithms to an aberration data set, obtaining a distribution of exchange cycle sizes, which serves to measure aberration complexity. Estimating complexity, in turn, helps indicate how damaging the aberrations are and may facilitate identification of radiation type in retrospective biodosimetry.

  11. Swelling of lignites in organic solvents

    SciTech Connect

    R.G. Makitra; D.V. Bryk

    2008-10-15

    Data on the swelling of Turkish lignites can be summarized using linear multiparameter equations that take into account various properties of solvents. Factors responsible for the amounts of absorbed solvents are the basicity and cohesion energy density of the solvents.

  12. Aggregates structure analysis of petroleum asphaltenes with small-angle neutron scattering.

    SciTech Connect

    Tanaka, R.; Hunt, J. E.; Winans, R. E.; Thiyagarajan, P.; Sato, S.; Takanohashi, T.; Idemitsu Kosan Co.; National Institute of Advanced Industrial Science and Technology

    2003-01-01

    The objective of this study is to examine changes in the structures of petroleum asphaltene aggregates in situ with small-angle neutron scattering (SANS). Asphaltenes were isolated from three different crude oils: Maya, Khafji, and Iranian Light. An aliquot of the 5 wt % asphaltene solution in deuterated Decalin, 1-methylnaphthalene, or quinoline was loaded in a special stainless steel cell for SANS measurements. SANS data measured at various temperatures from 25 to 350 {sup o}C showed various topological features different with asphaltene or solvent species. A fractal network was formed only with asphaltene of Maya in Decalin, and it remained even at 350 {sup o}C. In all of the solvents, asphaltenes aggregate in the form of a prolate ellipsoid with a high aspect ratio at 25 {sup o}C and got smaller with increasing temperature. That became a compact sphere with the size of around 25 {angstrom} in radius at 350 {sup o}C.

  13. Petroleum supply monthly with data for June 1997

    SciTech Connect

    1997-08-01

    Data presented in this publication describe the supply and disposition of petroleum products in the United states and major U.S. geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the U.S. The report includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. Both summary and detailed statistics are presented. 16 figs., 56 tabs.

  14. Petroleum supply monthly, with data from June 1996

    SciTech Connect

    1996-08-01

    The Petroleum Supply Division (PSD) of the Energy Information Administration (EIA) collects and published information on petroleum supply and disposition in the United States. The information is collected through a series of surveys that make up the Petroleum Supply Reporting System (PSRS). The PSRS data are published in the Weekly Petroleum Status Report (WPSR), Petroleum Supply Monthly (PSM), and Petroleum Supply Annual (PSA). This report presents information on crude oil production, crude oil imports and exports, refinery operations, natural gas processing, transportation, and oxygenate data.

  15. Petroleum supply annual 1996: Volume 1

    SciTech Connect

    1997-06-01

    The Petroleum Supply Annual (PSA) contains information on the supply and disposition of crude oil and petroleum products. The publication reflects data that were collected from the petroleum industry during 1996 through annual and monthly surveys. The PSA is divided into two volumes. This first volume contains three sections: Summary Statistics, Detailed Statistics, and Refinery Capacity; each with final annual data. The summary statistics section show 16 years of data depicting the balance between supply, disposition and ending stocks for various commodities including crude oil, motor gasoline, distillate fuel oil, residual fuel oil, jet fuel propane/propylene, and liquefied petroleum gases. The detailed statistics section provide 1996 detailed statistics on supply and disposition, refinery operations, imports and exports, stocks, and transportation of crude oil and petroleum products. The refinery capacity contain listings of refineries and associated crude oil distillation and downstream capacities by State, as of January 1, 1997, as well as summaries of corporate refinery capacities and refinery storage capacities. In addition, refinery receipts of crude oil by method of transportation for 1996 are provided. Also included are fuels consumed at refineries, and lists of shutdowns, sales, reactivations, and mergers during 1995 and 1996. 16 figs., 59 tabs.

  16. B Chromosomes – A Matter of Chromosome Drive

    PubMed Central

    Houben, Andreas

    2017-01-01

    B chromosomes are supernumerary chromosomes which are often preferentially inherited, deviating from usual Mendelian segregation. The balance between the so-called chromosome drive and the negative effects that the presence of Bs applies on the fitness of their host determines the frequency of Bs in a particular population. Drive is the key for understanding most B chromosomes. Drive occurs in many ways at pre-meiotic, meiotic or post-meiotic divisions, but the molecular mechanism remains unclear. The cellular mechanism of drive is reviewed based on the findings obtained for the B chromosomes of rye, maize and other species. How novel analytical tools will expand our ability to uncover the biology of B chromosome drive is discussed. PMID:28261259

  17. ON-SITE SOLVENT RECOVERY

    EPA Science Inventory

    This study evaluated the product quality, waste reduction/pollution prevention, and economic aspects of three technologies for onsite solvent recovery: atmospheric batch distillation, vacuum heat-pump distillation, and low-emission vapor degreasing. The atmospheric and vacuum ...

  18. RESIDUAL RISK ASSESSMENT: HALOGENATED SOLVENTS

    EPA Science Inventory

    This source category previously subjected to a technology-based standard will be examined to determine if health or ecological risks are significant enough to warrant further regulation for Halogenated Solvent Degreasing Facilities. These assessments utilize existing models and d...

  19. SOLV-DB: Solvents Data

    DOE Data Explorer

    SOLV-DB provides a specialized mix of information on commercially available solvents. The development of the database was funded under the Strategic Environmental Research and Development Program (SERDP) with funds from EPA and DOE's Office of Industrial Technologies in EE. The information includes: • Health and safety considerations involved in choosing and using solvents • Chemical and physical data affecting the suitability of a particular solvent for a wide range of potential applications • Regulatory responsibilities, including exposure and effluent limits, hazard classification status with respect to several key statutes, and selected reporting requirements • Environmental fate data, to indicate whether a solvent is likely to break down or persist in air or water, and what types of waste treatment techniques may apply to it • CAS numbers (from Chemical Abstracts Service) and Sax Numbers (from Sax, et.al., Dangerous Properties of Industrial Materials) Supplier Information See help information at http://solvdb.ncms.org/welcome.htm (Specialized Interface)

  20. Economics and regulation of petroleum futures markets

    SciTech Connect

    Not Available

    1980-08-01

    Because the futures market in petroleum products is a relatively recent phenomenon, the implications of public policies formulated for that market have not yet been fully explored. To provide the Office of Competition of the Department of Energy (DOE) with sufficient information to assess policy alternatives, Resource Planning Associates, Inc. (RPA) was asked to analyze the development of the futures market in No. 2 oil, assess the potential for futures markets in other petroleum products, and identify policy alternatives available to DOE. To perform this analysis, the criteria for a viable futures market was established first. Then, the experience to date with the 18-month-old futures market in No. 2 oil was examined, and the potential for viable futures markets in No. 6 oil, gasoline, jet fuel, and crude oil was assessed. Finally, how existing DOE regulations and prospective actions might affect petroleum futures market development was investigated.

  1. Unconventional petroleum: a current awareness bulletin

    SciTech Connect

    Grissom, M.C.

    1983-10-30

    The summaries in this bulletin cover both secondary and tertiary recovery of petroleum and the following topics under Oil Shales and Tar Sands: reserves and exploration; site geology and hydrology; drilling, fracturing, and mining; oil production, recovery, and refining; properties and composition; direct uses and by-products; health and safety; marketing and economics; waste research and management; environmental aspects; and regulations. These summaries and older citations to information on petroleum, oil shales, and tar sands back to the 1960's are available for on-line searching and retrieval on the Energy Data Base using the DOE/RECON system or commercial on-line retrieval systems. Retrospective searches can be made on any aspect of petroleum, oil shales, or tar sands, or customized profiles can be developed to provide current information for each user's needs.

  2. Petroleum systems, resources of Southeast Asia, Australasia

    SciTech Connect

    Howes, J.

    1997-12-15

    The Southeast Asia-Australasia region has over 100 productive petroleum systems ranging in age from the Paleozoic to the Pliocene. Plate tectonics have played a fundamental role in controlling the distribution and character of the region`s petroleum systems. There is a clear division between those systems on the Eurasian plate and those on the Indo-Australian plate. The distribution of significant oil and gas resources is highly concentrated in just a few chrono-stratigraphic units. Early Tertiary Paleogene source rocks account for over 50% of the region`s in-place petroleum resources. This article summarizes the region`s systems and resources, and compares and contrasts some of their essential elements in Southeast Asia and Australasia. With average production of 3.2 million b/d of oil and 18 bscfd of gas, the region accounts for almost 6% of world oil and gas production.

  3. Process for manufacturing a petroleum resin

    SciTech Connect

    Iwashita, T.; Nagano, M.; Tanaka, K.

    1981-08-11

    The present invention relates to a process for manufacturing a petroleum resin wherein a fraction (Component a) containing an aromatic hydrocarbon obtained by cracking of petroleum and a thermally polymerized oil (Component b) obtained by previously thermal-polymerizing the component a are mixed and then the mixture of the components a and B is subjected to polymerization by employing a Friedel-Crafts catalyst. It is also directed to propose a petroleum resin of a superior quality having a softening point optionally in a range of 30-120/sup 0/C and various bromine value in such a manner that a mixing ratio of the components a and B is properly adjusted.

  4. Applied biotransformations in green solvents.

    PubMed

    Hernáiz, María J; Alcántara, Andrés R; García, José I; Sinisterra, José V

    2010-08-16

    The definite interest in implementing sustainable industrial technologies has impelled the use of biocatalysts (enzymes or cells), leading to high chemo-, regio- and stereoselectivities under mild conditions. As usual substrates are not soluble in water, the employ of organic solvents is mandatory. We will focus on different attempts to combine the valuable properties of green solvents with the advantages of using biocatalysts for developing cleaner synthetic processes.

  5. The potential for low petroleum gasoline

    SciTech Connect

    Hadder, G.R.; Webb, G.M.; Clauson, M.

    1996-06-01

    The Energy Policy Act requires the Secretary of Energy to determine the feasibility of producing sufficient replacement fuels to replace at least 30 percent of the projected consumption of motor fuels by light duty vehicles in the year 2010. The Act also requires the Secretary to determine the greenhouse gas implications of the use of replacement fuels. A replacement fuel is a non-petroleum portion of gasoline, including certain alcohols, ethers, and other components. The Oak Ridge National Laboratory Refinery Yield Model has been used to study the cost and refinery impacts for production of {open_quotes}low petroleum{close_quotes} gasolines, which contain replacement fuels. The analysis suggests that high oxygenation is the key to meeting the replacement fuel target, and a major contributor to cost increase is investment in processes to produce and etherify light olefins. High oxygenation can also increase the costs of control of vapor pressure, distillation properties, and pollutant emissions of gasolines. Year-round low petroleum gasoline with near-30 percent non-petroleum components might be produced with cost increases of 23 to 37 cents per gallon of gasoline, and with greenhouse gas emissions changes between a 3 percent increase and a 16 percent decrease. Crude oil reduction, with decreased dependence on foreign sources, is a major objective of the low petroleum gasoline program. For year-round gasoline with near-30 percent non-petroleum components, crude oil use is reduced by 10 to 12 percent, at a cost $48 to $89 per barrel. Depending upon resolution of uncertainties about extrapolation of the Environmental Protection Agency Complex Model for pollutant emissions, availability of raw materials and other issues, costs could be lower or higher.

  6. Petroleum marketing monthly, September 1990. [Contains Glossary

    SciTech Connect

    Not Available

    1990-12-11

    This report is designed to give information and statistical data about a variety of crude oils and refined petroleum products. The publication provides statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysts, education institutions, and consumers. Data on crude oil include the domestic first purchase price, the f.o.b. and landed cost of imported crude oil, and the refiners' acquisition cost of crude oil. Sales data for motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane are presented. 12 figs., 55 tabs.

  7. The mirage of higher petroleum prices

    SciTech Connect

    Lynch, M.C.

    1996-02-01

    Most petroleum industry price forecasters do not possess a record of which they can be proud. Long-term petroleum market forecasting has been so inaccurate that it has often been described as virtually impossible. To avoid criticism of their performance, many organizations no longer circulate their forecasts. Why have the forecasts been so wrong? Because of failure to predict supply. This paper reviews the erroneous methods used to predict price trends in the oil and gas industry and identifies methods to correct the problem.

  8. Effect of petroleum hydrocarbons on algae

    SciTech Connect

    Bhadauria, S. ); Sengar, R.M.S. ); Mittal, S.; Bhattacharjee, S. )

    1992-01-01

    Algal species (65) were isolated from oil refinery effluent. Twenty-five of these species were cultured in Benecke's medium in a growth chamber, along with controls. Retardation in algal growth, inhibition in algal photosynthesis, and discoloration was observed in petroleum enriched medium. Few forms, viz. Cyclotella sp., Cosmarium sp., and Merismopedia sp. could not survive. The lag phase lengthened by several days and slope of exponential phase was also depressed. Chlamydomonas sp., Scenedesmus sp., Ankistrodesmus sp., Nitzschia sp. and Navicula sp. were comparatively susceptible to petroleum. Depression in carbon fixation, cell numbers, and total dry algal mass was noticeable, showing toxicity to both diatoms and green algae.

  9. Situation report for petroleum exporting countries

    SciTech Connect

    Hermelee, A.; D'Acierno, J.; Beller, M.; Smith, T.A.

    1980-11-01

    This report incorporates the contents of fifteen individual situation reports for major petroleum exporting countries that were prepared from the Office of Energy Emergency Management Information System. The situation reports give a synopsis of political, economic, and petroleum industry data for each oil exporting country and are designed to provide up-to-date information enabling the EEMIS Project Office to react in a timely manner to late-breaking events. The report gives a brief overview of crude oil production for the major oil producing regions of the world and identifies crude flows from the major oil producing to consuming regions - Western Europe, United States, and Japan.

  10. Petroleum Production for the Nontechnical Person

    SciTech Connect

    Gray, F.

    1986-01-01

    Petroleum Production for the Nontechnical Person is written for those whose jobs touch the production field but who still want to know more about the basics of production - without going back to school and without getting bogged down in a lengthy discourse on fluid dynamics. Contents include: Overview of the petroleum industry; Majors and independents; Productive formations; Field development; Drilling equipment and methods; Formation evaluation; Completion methods; Casing and cementing; Production concepts; Production methods; Production problems and special cases; Stimulation methods; Waterflooding; Enhanced oil recovery; Natural gas processing and cogeneration; Glossary; Index.

  11. Two stochastic models useful in petroleum exploration

    NASA Technical Reports Server (NTRS)

    Kaufman, G. M.; Bradley, P. G.

    1972-01-01

    A model of the petroleum exploration process that tests empirically the hypothesis that at an early stage in the exploration of a basin, the process behaves like sampling without replacement is proposed along with a model of the spatial distribution of petroleum reserviors that conforms to observed facts. In developing the model of discovery, the following topics are discussed: probabilitistic proportionality, likelihood function, and maximum likelihood estimation. In addition, the spatial model is described, which is defined as a stochastic process generating values of a sequence or random variables in a way that simulates the frequency distribution of areal extent, the geographic location, and shape of oil deposits

  12. Solubility of pyrene in binary alkane + 1-octanol solvent mixtures

    SciTech Connect

    Zvaigzne, A.I.; Acree, W.E. Jr.

    1995-09-01

    Solid-liquid equilibrium data of organic nonelectrolyte systems are becoming increasingly important in the petroleum industry, particularly in light of present trends toward heavier feedstocks and known carcinogenicity/mutagenicity of many of the larger polycyclic aromatic compounds. Experimental solubilities are reported for pyrene dissolved in seven binary mixtures containing 1-octanol with hexane, heptane, octane, cyclohexane, methylcyclohexane, 2,2,4-trimethylpentane, and (1,1-dimethylethyl)cyclohexane at 26 C. Results of these measurements are used to test two mathematical representations based upon the combined nearly ideal binary solvent (NIBS)/Redlich-Kister equation and modified Wilson model. For the system studied, the three-parameter combined NIBS/Redlich-Kister equation was found to provide the better mathematical representation, with deviations between experimental and back-calculated values being on the order of {+-}1.5% or lees. Slightly larger deviations were noted in the case of the two-parameter modified Wilson equation.

  13. Polymer Models of Interphase Chromosomes

    NASA Astrophysics Data System (ADS)

    Martin, Joshua; Kondev, Jané; Bressen, Debra; Haber, James

    2006-03-01

    Experiments during interphase, the growth phase of the cell cycle in eukaryotic cells, have shown that parts of chromosomes are tethered to the nuclear periphery[1]. Using a simple polymer model of interphase chromosomes that includes tethering, we compute the probability distribution for the distance between two marked points on the chromosome. These calculations are inspired by recent experiments with two or more fluorescent markers placed along the chromosome[2]. We demonstrate how experiments of this kind, in conjunction with simpe polymer models, can be used to systematically dissect the spatial organization of interphase chromosomes in the nucleus of living cells. This comparison of theory with experiments has lead to the conclusion that the structure of chromosome III in yeast is consistent with a 10nm-fiber model of chromatin. [1]Wallace F. Marshall. Current Biology, 12, 2002. [2] Kerstin Bystricky, Patrick Heun, Lutz Gehlen, Jörg Langowski and Susan M. Gasser. PNAS, 101(47) 2004

  14. Petroleum supply monthly, November 1996 with data for September 1996

    SciTech Connect

    1996-11-01

    Data presented in this report describes the supply and disposition of petroleum products in the US and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products fin the US (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the US. The tables and figures in the Summary Statistics section present a time series of selected petroleum data on a US level. The Detailed Statistics tables present statistics for the most current month available as well as year-to-date. 16 figs., 66 tabs.

  15. Petroleum supply monthly with data from October 1996

    SciTech Connect

    1996-12-01

    This publication provides information on the supply and disposition of petroleum products in the United states and major geographic regions. The data series describe production, imports, exports, PAD district movements, and inventories by major suppliers of petroleum products.

  16. Petroleum supply monthly, December 1998 with data for October 1998

    SciTech Connect

    1998-12-01

    Data presented in the Petroleum Supply Monthly (PSM) describe the supply and disposition of petroleum products in the US and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the US (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the US. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics. 82 tabs.

  17. Petroleum supply monthly with data for December 1996

    SciTech Connect

    1997-02-01

    This report presents statistical data on the production, imports, exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States.

  18. Petroleum supply monthly: September 1996, with data for July 1996

    SciTech Connect

    1996-09-01

    Data presented in this report describe the supply and disposition of petroleum products in the US and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the US (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the US. The tables and figures in the Summary Statistics section of the PSM present a time series of selected petroleum data on a US level. The Detailed Statistics tables of the PSM present statistics for the most current month available as well as year-to-date. 56 tabs.

  19. Histone acetylation in insect chromosomes.

    PubMed

    Allfrey, V G; Pogo, B G; Littau, V C; Gershey, E L; Mirsky, A E

    1968-01-19

    Acetylation of histones takes place along the salivary gland chromosomes of Chironomus thummi when RNA synthesis is active. It can be observed but not measured quantitatively by autoradiography of chromosome squashes. The "fixatives" commonly used in preparing squashes of insect chromosomes preferentially extract the highly acetylated "arginine-rich" histone fractions; the use of such fixatives may explain the reported absence of histone acetylation in Drosophila melanogaster.

  20. [Compositions and residual properties of petroleum hydrocarbon in contaminated soil of the oilfields].

    PubMed

    Hu, Di; Li, Chuan; Dong, Qian-Qian; Li, Li-Ming; Li, Guang-He

    2014-01-01

    The aims of this study were to determine the compositions and residual properties of petroleum hydrocarbon in soil, as well as to identify the source and weathering degree of the pollution. A total of 5 producing wells in Gudao and Hekou oil producing region of Shengli oilfields were analyzed. More than 50 individual target compounds including straight-and branched-chain alkanes( n-alkanes, pristine and phytane) and polycyclic aromatic hydrocarbons (PAHs) in soil samples and crude oil were determined by gas chromatography-mass spectrometry (GC-MS). The percentages of chain alkanes and PAHs in total solvent extractable matters(TSEM) of soil samples were both much lower than those in the crude oil samples. The compositions of petroleum hydrocarbon in soil samples differed from those in crude oil, which indicated the n-alkanes with carbon numbers <12 were much easier to lose in contrast to the n-alkanes with high carbon numbers. With n-octadecane/phytane as index for the weathering rate of oil contaminated soils, the relationship between the index and petroleum hydrocarbon compounds was analyzed using principal component analysis (PCA). The results showed that the n-alkanes with carbon numbers > 33 and the PAHs with rings between 3 and 5 were much harder to degrade. PCA of 4 indexes for source identification revealed more than 50% of the soil samples were polluted by crude oil, which needs more attention during remediation.

  1. Effect of some petroleum sulfonate surfactants on the apparent water solubility of organic compounds

    SciTech Connect

    Kile, D.E.; Chiou, C.T. ); Helburn, R.S. )

    1990-02-01

    Water solubility enhancements of 1,1-bis(p-chlorophenyl)-2,2,2-trichloroethane (DDT) and 1,2,3-trichlorobenzene (TCB) by some commercial petroleum sulfonates (Petronate L, Petronate HL, and Pyronate 40) were studied at room temperature. Unlike conventional surfactants, the petroleum sulfonate surfactants are mixtures of sulfonated hydrocarbons and free mineral oils, which form stable emulsions in water and thus behave much like a bulk organic phase in concentrating organic solutes. The extent of solubility enhancement is linearly proportional to the concentration of the petroleum sulfonate-oil (PSO) emulsion, in contrast with the effect of a conventional surfactant in which a sharp inflection occurs in the vicinity of the critical micelle concentration (CMC). The enhancement effect of the PSO surfactant is 1.5-3 orders of magnitude greater than that of ordinary surfactant monomers below the CMC. The partition coefficient of the solute between the emulsified PSO phase and water (K{sub em}) is closely related to the nonpolar content of the PSO surfactant; the normalized K{sub em} values are about the same order of magnitude as the solvent (octanol)-water partition coefficients of the solutes.

  2. Solvent/Non-Solvent Sintering To Make Microsphere Scaffolds

    NASA Technical Reports Server (NTRS)

    Laurencin, Cato T.; Brown, Justin L.; Nair, Lakshmi

    2011-01-01

    A solvent/non-solvent sintering technique has been devised for joining polymeric microspheres to make porous matrices for use as drug-delivery devices or scaffolds that could be seeded with cells for growing tissues. Unlike traditional sintering at elevated temperature and pressure, this technique is practiced at room temperature and pressure and, therefore, does not cause thermal degradation of any drug, protein, or other biochemical with which the microspheres might be loaded to impart properties desired in a specific application. Also, properties of scaffolds made by this technique are more reproducible than are properties of comparable scaffolds made by traditional sintering. The technique involves the use of two miscible organic liquids: one that is and one that is not a solvent for the affected polymer. The polymeric microspheres are placed in a mold having the size and shape of the desired scaffold, then the solvent/non-solvent mixture is poured into the mold to fill the void volume between the microspheres, then the liquid mixture is allowed to evaporate. Some of the properties of the resulting scaffold can be tailored through choice of the proportions of the liquids and the diameter of the microspheres.

  3. REDUCING POWER PRODUCTION COSTS BY UTILIZING PETROLEUM COKE

    SciTech Connect

    Kevin C. Galbreath; Donald L. Toman; Christopher J. Zygarlicke

    1999-09-01

    Petroleum coke, a byproduct of the petroleum-refining process, is an attractive primary or supplemental fuel for power production primarily because of a progressive and predictable increase in the production volumes of petroleum coke (1, 2). Petroleum coke is most commonly blended with coal in proportions suitable to meet sulfur emission compliance. Petroleum coke is generally less reactive than coal; therefore, the cofiring of petroleum coke with coal typically improves ignition, flame stability, and carbon loss relative to the combustion of petroleum coke alone. Although petroleum coke is a desirable fuel for producing relatively inexpensive electrical power, concerns about the effects of petroleum coke blending on combustion and pollution control processes exist in the coal-fired utility industry (3). The Energy & Environmental Research Center (EERC) completed a 2-year technical assessment of petroleum coke as a supplemental fuel. A survey questionnaire was sent to seven electric utility companies that are currently cofiring coal and petroleum coke in an effort to solicit specific suggestions on research needs and fuel selections. An example of the letter and survey questionnaire is presented in Appendix A. Interest was expressed by most utilities in evaluating the effects of petroleum coke blending on grindability, combustion reactivity, fouling, slagging, and fly ash emissions control. Unexpectedly, concern over corrosion was not expressed by the utilities contacted. Although all seven utilities responded to the question, only two utilities, Northern States Power Company (NSP) and Ameren, sent fuels to the EERC for evaluation. Both utilities sent subbituminous coals from the Power River Basin and petroleum shot coke samples. Petroleum shot coke is produced unintentionally during operational upsets in the petroleum refining process. This report evaluates the effects of petroleum shot coke blending on grindability, fuel reactivity, fouling/slagging, and

  4. Mexico's petroleum and US policy: implications for the 1980s

    SciTech Connect

    Ronfeldt, D.; Nehring, R.; Gandara, A.

    1980-06-01

    This report examines selected factor affecting Mexico's future petroleum policies, and then assesses various implications of Mexico's petroleum for US interests and policies. After a brief introduction, the report is divided into three sections. The first offers a detailed analysis of Mexico's petroleum resources and production possibilities. The second considers petroleum as a symbolic issue of profound significance for Mexican nationalism. The final section provides an assessment of these and other factors for US interests, objectives, and policy options during the 1980s.

  5. Computational comparison of oxidation stability: Solvent/salt monomers vs solvent-solvent/salt pairs

    NASA Astrophysics Data System (ADS)

    Kim, Dong Young; Park, Min Sik; Lim, Younhee; Kang, Yoon-Sok; Park, Jin-Hwan; Doo, Seok-Gwang

    2015-08-01

    A fundamental understanding of the anodic stabilities of electrolytes is important for the development of advanced high-voltage electrolytes. In this study, we calculated and systematically compared the oxidation stabilities of monomeric solvents and anions, and bimolecular solvent-solvent and anion-solvent systems that are considered to be high-voltage electrolyte components, using ab initio calculations. Oxidation stabilities of solvent or anion monomers without considering specific solvation molecules cannot represent experimental oxidation stabilities. The oxidation of electrolytes usually forms neutral or cationic radicals, which immediately undergo further reactions stabilizing the products. Oxidatively driven intermolecular reactions are the main reason for the lower oxidation stabilities of electrolytes compared with those of monomeric compounds. Electrolyte components such as tetramethylene sulfone (TMS), ethyl methyl sulfone (EMS), bis(oxalate)borate (BOB-), and bis(trifluoromethane)sulfonamide (TFSI-) that minimize such intermolecular chemical reactions on oxidation can maintain the oxidation stabilities of monomers. In predictions of the theoretical oxidation stabilities of electrolytes, simple comparisons of highest occupied molecular orbital energies can be misleading, even if microsolvation or bulk clusters are considered. Instead, bimolecular solvent complexes with a salt anion should be at least considered in oxidation calculations. This study provides important information on fundamental and applied aspects of the development of electrolytes.

  6. Petroleum supply monthly, March 1999, with data for January 1999

    SciTech Connect

    1999-03-01

    The Petroleum Supply Monthly (PSM) is one of a family of four petroleum supply publications produced by the Petroleum Division within the Energy Information Administration (EIA) reflecting different levels of data timeliness and completeness. The other publications are the Weekly Petroleum Status Report (WPSR), the Winter Fuels Report, and the Petroleum Supply Annual (PSA). Data presented in the PSM describe the supply and disposition of petroleum products in the US and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the US (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the US. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics.

  7. 49 CFR 393.69 - Liquefied petroleum gas systems.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 49 Transportation 5 2013-10-01 2013-10-01 false Liquefied petroleum gas systems. 393.69 Section... ACCESSORIES NECESSARY FOR SAFE OPERATION Fuel Systems § 393.69 Liquefied petroleum gas systems. (a) A fuel system that uses liquefied petroleum gas as a fuel for the operation of a motor vehicle or for...

  8. 75 FR 63200 - Petroleum Wax Candles From China

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-10-14

    ... COMMISSION Petroleum Wax Candles From China AGENCY: United States International Trade Commission. ACTION: Scheduling of an expedited five-year review concerning the antidumping duty order on petroleum wax candles... whether revocation of the antidumping duty order on petroleum wax candles from China would be likely...

  9. 21 CFR 172.884 - Odorless light petroleum hydrocarbons.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 3 2011-04-01 2011-04-01 false Odorless light petroleum hydrocarbons. 172.884... HUMAN CONSUMPTION Multipurpose Additives § 172.884 Odorless light petroleum hydrocarbons. Odorless light petroleum hydrocarbons may be safely used in food, in accordance with the following prescribed...

  10. 21 CFR 172.882 - Synthetic isoparaffinic petroleum hydrocarbons.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 3 2012-04-01 2012-04-01 false Synthetic isoparaffinic petroleum hydrocarbons... FOOD FOR HUMAN CONSUMPTION Multipurpose Additives § 172.882 Synthetic isoparaffinic petroleum hydrocarbons. Synthetic isoparaffinic petroleum hydrocarbons may be safely used in food, in accordance with...

  11. 21 CFR 172.882 - Synthetic isoparaffinic petroleum hydrocarbons.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 3 2011-04-01 2011-04-01 false Synthetic isoparaffinic petroleum hydrocarbons... FOOD FOR HUMAN CONSUMPTION Multipurpose Additives § 172.882 Synthetic isoparaffinic petroleum hydrocarbons. Synthetic isoparaffinic petroleum hydrocarbons may be safely used in food, in accordance with...

  12. 49 CFR 393.69 - Liquefied petroleum gas systems.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 5 2011-10-01 2011-10-01 false Liquefied petroleum gas systems. 393.69 Section... ACCESSORIES NECESSARY FOR SAFE OPERATION Fuel Systems § 393.69 Liquefied petroleum gas systems. (a) A fuel system that uses liquefied petroleum gas as a fuel for the operation of a motor vehicle or for...

  13. 21 CFR 172.882 - Synthetic isoparaffinic petroleum hydrocarbons.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 3 2013-04-01 2013-04-01 false Synthetic isoparaffinic petroleum hydrocarbons... FOOD FOR HUMAN CONSUMPTION Multipurpose Additives § 172.882 Synthetic isoparaffinic petroleum hydrocarbons. Synthetic isoparaffinic petroleum hydrocarbons may be safely used in food, in accordance with...

  14. 48 CFR 908.7109 - Fuels and packaged petroleum products.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 48 Federal Acquisition Regulations System 5 2012-10-01 2012-10-01 false Fuels and packaged petroleum products. 908.7109 Section 908.7109 Federal Acquisition Regulations System DEPARTMENT OF ENERGY....7109 Fuels and packaged petroleum products. Acquisitions of fuel and packaged petroleum products by...

  15. 21 CFR 178.3650 - Odorless light petroleum hydrocarbons.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 3 2013-04-01 2013-04-01 false Odorless light petroleum hydrocarbons. 178.3650... SANITIZERS Certain Adjuvants and Production Aids § 178.3650 Odorless light petroleum hydrocarbons. Odorless light petroleum hydrocarbons may be safely used, as a component of nonfood articles intended for use...

  16. 40 CFR 1065.720 - Liquefied petroleum gas.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 34 2013-07-01 2013-07-01 false Liquefied petroleum gas. 1065.720... Standards § 1065.720 Liquefied petroleum gas. (a) Except as specified in paragraph (b) of this section, liquefied petroleum gas for testing must meet the specifications in the following table: Table 1 of §...

  17. 10 CFR 490.804 - Eligible reductions in petroleum consumption.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 10 Energy 3 2012-01-01 2012-01-01 false Eligible reductions in petroleum consumption. 490.804... Alternative Compliance § 490.804 Eligible reductions in petroleum consumption. (a) Motor vehicles. Demonstrated reductions in petroleum consumption during the model year for which a waiver is requested that...

  18. 30 CFR 57.4463 - Liquefied petroleum gas use underground.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 30 Mineral Resources 1 2014-07-01 2014-07-01 false Liquefied petroleum gas use underground. 57... Fire Prevention and Control Flammable and Combustible Liquids and Gases § 57.4463 Liquefied petroleum gas use underground. Use of liquefied petroleum gases underground shall be limited to maintenance...

  19. 21 CFR 172.884 - Odorless light petroleum hydrocarbons.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 3 2012-04-01 2012-04-01 false Odorless light petroleum hydrocarbons. 172.884... HUMAN CONSUMPTION Multipurpose Additives § 172.884 Odorless light petroleum hydrocarbons. Odorless light petroleum hydrocarbons may be safely used in food, in accordance with the following prescribed...

  20. 40 CFR 52.1931 - Petroleum storage tank controls.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 4 2011-07-01 2011-07-01 false Petroleum storage tank controls. 52... (CONTINUED) APPROVAL AND PROMULGATION OF IMPLEMENTATION PLANS (CONTINUED) Oklahoma § 52.1931 Petroleum... plan, the petroleum storage tanks listed in paragraphs (b) through (e) of this section shall be...

  1. 10 CFR 490.804 - Eligible reductions in petroleum consumption.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 10 Energy 3 2013-01-01 2013-01-01 false Eligible reductions in petroleum consumption. 490.804... Alternative Compliance § 490.804 Eligible reductions in petroleum consumption. (a) Motor vehicles. Demonstrated reductions in petroleum consumption during the model year for which a waiver is requested that...

  2. 40 CFR 280.41 - Requirements for petroleum UST systems.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 27 2014-07-01 2014-07-01 false Requirements for petroleum UST systems... UNDERGROUND STORAGE TANKS (UST) Release Detection § 280.41 Requirements for petroleum UST systems. Owners and operators of petroleum UST systems must provide release detection for tanks and piping as follows: (a)...

  3. 40 CFR 1065.720 - Liquefied petroleum gas.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 33 2014-07-01 2014-07-01 false Liquefied petroleum gas. 1065.720... Standards § 1065.720 Liquefied petroleum gas. (a) Except as specified in paragraph (b) of this section, liquefied petroleum gas for testing must meet the specifications in the following table: Table 1 of §...

  4. 49 CFR 393.69 - Liquefied petroleum gas systems.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 49 Transportation 5 2014-10-01 2014-10-01 false Liquefied petroleum gas systems. 393.69 Section... ACCESSORIES NECESSARY FOR SAFE OPERATION Fuel Systems § 393.69 Liquefied petroleum gas systems. (a) A fuel system that uses liquefied petroleum gas as a fuel for the operation of a motor vehicle or for...

  5. 49 CFR 192.11 - Petroleum gas systems.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 49 Transportation 3 2014-10-01 2014-10-01 false Petroleum gas systems. 192.11 Section 192.11... BY PIPELINE: MINIMUM FEDERAL SAFETY STANDARDS General § 192.11 Petroleum gas systems. (a) Each plant that supplies petroleum gas by pipeline to a natural gas distribution system must meet the...

  6. 21 CFR 178.3530 - Isoparaffinic petroleum hydrocarbons, synthetic.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Isoparaffinic petroleum hydrocarbons, synthetic... AIDS, AND SANITIZERS Certain Adjuvants and Production Aids § 178.3530 Isoparaffinic petroleum hydrocarbons, synthetic. Isoparaffinic petroleum hydrocarbons, synthetic, may be safely used in the...

  7. 10 CFR 490.804 - Eligible reductions in petroleum consumption.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 10 Energy 3 2014-01-01 2014-01-01 false Eligible reductions in petroleum consumption. 490.804... Alternative Compliance § 490.804 Eligible reductions in petroleum consumption. (a) Motor vehicles. Demonstrated reductions in petroleum consumption during the model year for which a waiver is requested that...

  8. 30 CFR 57.4463 - Liquefied petroleum gas use underground.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 30 Mineral Resources 1 2012-07-01 2012-07-01 false Liquefied petroleum gas use underground. 57... Fire Prevention and Control Flammable and Combustible Liquids and Gases § 57.4463 Liquefied petroleum gas use underground. Use of liquefied petroleum gases underground shall be limited to maintenance...

  9. 40 CFR 280.41 - Requirements for petroleum UST systems.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 28 2013-07-01 2013-07-01 false Requirements for petroleum UST systems... UNDERGROUND STORAGE TANKS (UST) Release Detection § 280.41 Requirements for petroleum UST systems. Owners and operators of petroleum UST systems must provide release detection for tanks and piping as follows: (a)...

  10. 46 CFR 105.05-2 - Prohibitions regarding petroleum products.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 4 2014-10-01 2014-10-01 false Prohibitions regarding petroleum products. 105.05-2... VESSELS COMMERCIAL FISHING VESSELS DISPENSING PETROLEUM PRODUCTS Application § 105.05-2 Prohibitions regarding petroleum products. (a) Commercial fishing vessels shall not transport Grade A flammable...

  11. 40 CFR 52.1931 - Petroleum storage tank controls.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 4 2013-07-01 2013-07-01 false Petroleum storage tank controls. 52... (CONTINUED) APPROVAL AND PROMULGATION OF IMPLEMENTATION PLANS (CONTINUED) Oklahoma § 52.1931 Petroleum... plan, the petroleum storage tanks listed in paragraphs (b) through (e) of this section shall be...

  12. 21 CFR 172.882 - Synthetic isoparaffinic petroleum hydrocarbons.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Synthetic isoparaffinic petroleum hydrocarbons. 172... FOOD FOR HUMAN CONSUMPTION Multipurpose Additives § 172.882 Synthetic isoparaffinic petroleum hydrocarbons. Synthetic isoparaffinic petroleum hydrocarbons may be safely used in food, in accordance with...

  13. 29 CFR 794.132 - “Petroleum products”.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 29 Labor 3 2011-07-01 2011-07-01 false âPetroleum productsâ. 794.132 Section 794.132 Labor... WHOLESALE OR BULK PETROLEUM DISTRIBUTORS UNDER SECTION 7(b)(3) OF THE FAIR LABOR STANDARDS ACT Exemption... § 794.132 “Petroleum products”. A sale by an enterprise engaged in the wholesale or bulk distribution...

  14. 40 CFR 280.41 - Requirements for petroleum UST systems.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 27 2011-07-01 2011-07-01 false Requirements for petroleum UST systems... UNDERGROUND STORAGE TANKS (UST) Release Detection § 280.41 Requirements for petroleum UST systems. Owners and operators of petroleum UST systems must provide release detection for tanks and piping as follows: (a)...

  15. Petroleum Technology: From Refinery To Home, Business, and Industry.

    ERIC Educational Resources Information Center

    Shewell, John A.

    1997-01-01

    Discusses the application of petroleum technology and presents activities designed to raise students' awareness of the importance of petroleum-based products in their lives. Includes a handout designed to help students understand the refining processes in which the crude oil from the drill site is transformed into nearly 6,000 petroleum-based…

  16. 49 CFR 192.11 - Petroleum gas systems.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 49 Transportation 3 2012-10-01 2012-10-01 false Petroleum gas systems. 192.11 Section 192.11... BY PIPELINE: MINIMUM FEDERAL SAFETY STANDARDS General § 192.11 Petroleum gas systems. (a) Each plant that supplies petroleum gas by pipeline to a natural gas distribution system must meet the...

  17. 49 CFR 192.11 - Petroleum gas systems.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 49 Transportation 3 2013-10-01 2013-10-01 false Petroleum gas systems. 192.11 Section 192.11... BY PIPELINE: MINIMUM FEDERAL SAFETY STANDARDS General § 192.11 Petroleum gas systems. (a) Each plant that supplies petroleum gas by pipeline to a natural gas distribution system must meet the...

  18. 46 CFR 105.05-2 - Prohibitions regarding petroleum products.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 4 2011-10-01 2011-10-01 false Prohibitions regarding petroleum products. 105.05-2... VESSELS COMMERCIAL FISHING VESSELS DISPENSING PETROLEUM PRODUCTS Application § 105.05-2 Prohibitions regarding petroleum products. (a) Commercial fishing vessels shall not transport Grade A flammable...

  19. 21 CFR 172.882 - Synthetic isoparaffinic petroleum hydrocarbons.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 3 2014-04-01 2014-04-01 false Synthetic isoparaffinic petroleum hydrocarbons... Multipurpose Additives § 172.882 Synthetic isoparaffinic petroleum hydrocarbons. Synthetic isoparaffinic petroleum hydrocarbons may be safely used in food, in accordance with the following conditions: (a) They...

  20. 21 CFR 172.884 - Odorless light petroleum hydrocarbons.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Odorless light petroleum hydrocarbons. 172.884... HUMAN CONSUMPTION Multipurpose Additives § 172.884 Odorless light petroleum hydrocarbons. Odorless light petroleum hydrocarbons may be safely used in food, in accordance with the following prescribed...