Sample records for phenylethylene
-
Weigel, A; Ernsting, N P
2010-06-17
Excited-state relaxation of cis- and trans-stilbene is traced with femtosecond stimulated Raman spectroscopy, exploiting S(n) <-- S(1) resonance conditions. For both isomers, decay in Raman intensity, shift of spectral positions, and broadening of the bands indicate intramolecular vibrational redistribution (IVR). In n-hexane this process effectively takes 0.5-0.7 ps. Analysis of the intensity decay allows us to further distinguish two phases for trans-stilbene: fast IVR within a subset of modes (approximately 0.3 ps) followed by slower equilibration over the full vibrational manifold (approximately 0.9 ps). In acetonitrile IVR completes with 0.15 ps; this acceleration may originate from symmetry breakage induced by the polar solvent. Another process, dynamic solvation by acetonitrile, is seen as spectral narrowing and characteristic band shifts of the C=C stretch and phenyl bending modes with 0.69 ps. Wavepacket motion is observed in both isomers as oscillation of low-frequency bands with their pertinent mode frequency (90 or 195 cm(-1) in trans-stilbene; 250 cm(-1) in cis-stilbene). Anharmonic coupling shows up as a modulation of high-frequency peak positions by phenyl/ethylene torsion modes of 57 and 90 cm(-1). Decay and shift of the 90 cm(-1) inverse Raman band within the first 0.3 ps suggests a gradual involvement of phenyl/ethylene torsion in relaxation. In cis- and trans-stilbene, low-frequency spectral changes are found within 0.15 ps, indicating an additional ultrafast process.
-
[The compounds from n-butanol fraction of Alpinia oxyphylla].
Xie, Bin-Bin; Hou, Lei; Guo, Bao-Lin; Huang, Wen-Hua; Yu, Jing-Guang
2014-11-01
Nine compounds were isolated from the n-butanol fraction of 95% ethanol extract of the fruit of Alpinia oxyphylla Miq. with a combination of various chromatographic approaches, including MDS resin, silica gel, reverse phase C18 and preparative HPLC. On the basis of spectroscopic data analysis, they were elucidated as (1R, 4R, 10R)-1β, 4α-dihydroxy-11, 12, 13-trinor-5, 6-eudesmen-7-one (1), 1β, 4β-dihydroxy-11, 12, 13-trinor-8, 9-eudesmen-7-one (2), oxyphyllenone A (3), oxyphyllenone B (4), rhamnocitrin (5), staphylionoside D (6), benzyl-1-O-β-D-glucopyranoside (7), 2-O-β-D-glucopyranosyl-(1S)-phenylethylene glycol (8), and (S)-1-phenylethyl-β-D-glucopyranoside (9). Among them, compound 1 is a new sesquiterpene, named as oxyphyllenone C; compounds 8 and 9 are new natural products; compounds 2 and 6 were isolated from the genus Alpinia for the first time, and compound 7 was isolated from A. oxyphylla for the first time.
-
DOE Office of Scientific and Technical Information (OSTI.GOV)
Milstein, O.; Gersonde, R.; Huttermann, A.
1992-10-01
White rot basidiomycetes were able to biodegrade styrene (1-phenylethene) graft copolymers of lignin containing different proportions of lignin and polystyrene (poly(1-phenylethylene)). The biodegradation tests were run on lignin-styrene copolymerization products which contained 10.3, 32.2, and 50.4{percent} (wt/wt) lignin. The polymer samples were incubated with the white rot fungi Pleurotus ostreatus, Phanerochaete chrysosporium, and Trametes versicolor and the brown rot fungus Gloeophyllum trabeum. White rot fungi degraded the plastic samples at a rate which increased with increasing lignin content in the copolymer sample. Both polystyrene and lignin components of the copolymer were readily degraded. Polystyrene pellets were not degradable in thesemore » tests. Degradation was verified for both incubated and control samples by weight loss, quantitative UV spectrophotometric analysis of both lignin and styrene residues, scanning electron microscopy of the plastic surface, and the presence of enzymes active in degradation during incubation. Brown rot fungus did not affect any of the plastics. White rot fungi produced and secreted oxidative enzymes associated with lignin degradation in liquid media during incubation with lignin-polystyrene copolymer.« less
-
Electron transfer of plurimodified DNA SAMs.
Rospigliosi, Alessandro; Ehlich, Rudolf; Hoerber, Heinrich; Middelberg, Anton; Moggridge, Geoff
2007-07-17
An STM-based current-voltage (I/V) investigation of deoxyribonucleic acid (DNA) 18 base pair (bp) oligonucleotide monolayers on gold is presented. Three bases of each of the immobilized and complementary strands were modified with either iodine or phenylethylene moieties. The oligonucleotides were immobilized on template stripped gold (tsg) surfaces and characterized by atomic force microscopy (AFM) and scanning tunneling microscopy (STM). AFM imaging showed that monolayers of the expected height were formed. A comparative study of normal, halogenated, and phenyl-modified DNA was made with the STM in tunneling spectroscopy (TS) mode. I/V spectroscopic measurements in the range +/-250 mV on both single- and double-stranded (ds) DNA monolayers (modified and unmodified) showed that for negative substrate bias (U(sub)) electron transfer is more efficient through a phenyl-modified monolayer than through normal or halogenated DNA. This effect was particularly clear below a threshold bias of -100 mV. For positive U(sub), unmodified ds DNA was found to conduct slightly better than the modified strands. This is presumably caused by greater order in the unmodified versus modified DNA monolayers. Modifications on the immobilized (thiolated) strand seem to improve electron transport through the DNA monolayer more than modifications on the complementary (not surface-bound) strand.
-
An issue paper on the use of hydrogen getters in transportation packaging
DOE Office of Scientific and Technical Information (OSTI.GOV)
NIGREY,PAUL J.
2000-02-01
The accumulation of hydrogen is usually an undesirable occurrence because buildup in sealed systems pose explosion hazards under certain conditions. Hydrogen scavengers, or getters, can avert these problems by removing hydrogen from such environments. This paper provides a review of a number of reversible and irreversible getters that potentially could be used to reduce the buildup of hydrogen gas in containers for the transport of radioactive materials. In addition to describing getters that have already been used for such purposes, novel getters that might find application in future transport packages are also discussed. This paper also discusses getter material poisoning,more » the use of getters in packaging, the effects of radiation on getters, the compatibility of getters with packaging, design considerations, regulatory precedents, and makes general recommendations for the materials that have the greatest applicability in transport packaging. At this time, the Pacific Northwest National Laboratory composite getter, DEB [1,4-(phenylethylene)benzene] or similar polymer-based getters, and a manganese dioxide-based getter appear to be attractive candidates that should be further evaluated. These getters potentially can help prevent pressurization from radiolytic reactions in transportation packaging.« less
-
NASA Astrophysics Data System (ADS)
Barnsley, Kelton K.
Chemotherapy is often limited by off-target toxicity and the development of multi-drug resistance in response to treatment. Strategies which reduce off-target toxicity by passively or actively targeting cancer cells may improve the efficacy of chemotherapy. Herein, two projects relating to targeted therapy are described. In the first project, the binding modes of 1,1-bis(4-hydroxyphenyl)-2-phenylethylenes (THPEs), a class of synthetic estrogens previously developed by our group, in the human estrogen receptor alpha-ligand binding domain were studied using molecular modeling programs YASARA AutoDock and Schrodinger Glide. The results were internally consistent and supported the observation that a bromine or iodine atom at the 2-position of the THPEs contributes positively to their binding in the estrogen receptor. In the second project, a "molecular toolkit" approach to the synthesis of multifunctional nanoparticles was envisioned. Our hypothesis was that the physical and chemical properties of the final product could be defined by controlling the types and relative amounts of prefunctionalized polymer units (PPUs) as well as the emulsification conditions. The design and syntheses of heterobifunctional linkers and other components for a preliminary molecular toolkit are reported, and the literature on select heterobifunctional aliphatic linkers is examined.
-
Microplates with adaptive surfaces.
Akbulut, Meshude; Lakshmi, Dhana; Whitcombe, Michael J; Piletska, Elena V; Chianella, Iva; Güven, Olgun; Piletsky, Sergey A
2011-11-14
Here we present a new and versatile method for the modification of the well surfaces of polystyrene microtiter plates (microplates) with poly(N-phenylethylene diamine methacrylamide), (poly-NPEDMA). The chemical grafting of poly-NPEDMA to the surface of microplates resulted in the formation of thin layers of a polyaniline derivative bearing pendant methacrylamide double bonds. These were used as the attachment point for various functional polymers through photochemical grafting of various, for example, acrylate and methacrylate, polymers with different functionalities. In a model experiment, we have modified poly-NPEDMA-coated microplates with a small library of polymers containing different functional groups using a two-step approach. In the first step, double bonds were activated by UV irradiation in the presence of N,N-diethyldithiocarbamic acid benzyl ester (iniferter). This enabled grafting of the polymer library in the second step by UV irradiation of solutions of the corresponding monomers in the microplate wells. The uniformity of coatings was confirmed spectrophotometrically, by microscopic imaging and by contact angle measurements (CA). The feasibility of the current technology has been shown by the generation of a small library of polymers grafted to the microplate well surfaces and screening of their affinity to small molecules, such as atrazine, a trio of organic dyes, and a model protein, bovine serum albumin (BSA). The stability of the polymers, reproducibility of measurement, ease of preparation, and cost-effectiveness make this approach suitable for applications in high-throughput screening in the area of materials research.
-
DOE Office of Scientific and Technical Information (OSTI.GOV)
DeSombre, E.R.; Mease, R.C.; Hughes, A.
1988-01-01
A triphenylbromoethylene, 1,1-bis(p-hydroxyphenyl)-2-bromo-2-phenylethylene, Br-BHPE, and a bromosteroidal estrogen, 17..cap alpha..- bromovinylestradiol, BrVE/sub 2/, were labeled with the Auger electron emitting nuclide bromine-80m, prepared by the (p,n) reaction with /sup 80/Se. To assess their potential as estrogen receptor (ER) directed therapeutic substrates the bromine-80m labeled estrogens were injected into immature female rats and the tissue distribution studied at 0.5 and 2 hours. Both radiobromoestrogens showed substantial diethylstilbesterol (DES)-inhibitable localization in the ER rich tissues, uterus, pituitary, ovary and vagina at both time points. While the percent dose per gram tissue was higher for the Br-BHPE, the BrVE/sub 2/ showed higher tissuemore » to blood ratios, especially at 2 hr, reflecting the lower blood concentrations of radiobromine following administration of the steroidal bromoestrogen. Comparing intraperitoneal, intravenous and subcutaneous routes of administration for the radiobromine labeled Br-BHPE, the intraperitoneal route was particularly advantageous to provide maximum, DES-inhibitable concentrations in the peritoneal, ER-rich target organs, the uterus, ovary and vagina. While uterine concentrations after BrBHPE were from 10--48% dose/g and after BrVE/sub 2/ were 15--25% dose/g, similar treatment with /sup 80m/Br as sodium bromide showed uniform low concentrations in all tissues at about the levels seen in blood. The effective specific activity of (/sup 80m/Br)BrBHPE, assayed by specific binding to ER in rat uterine cytosol, was 8700 Ci/mmole. 23 refs., 9 figs., 2 tabs.« less