Zinc and copper status of women by physical activity and menstrual status

DOE Office of Scientific and Technical Information (OSTI.GOV)

Singh, A.; Deuster, P.A.; Kyle, S.B.

The zinc and copper status of 33 eumenorrheic (EU) and 12 amenorrheic (AM) female marathon runners and 19 EU and 8 AM nonrunners were determined from 3-day diet records and plasma and erythrocyte (RBC) levels. The study was conducted as a completely randomized 2 x 2 factorial. Mean daily zinc intakes of all groups fell below the recommended dietary allowances. Copper intakes of runners (EU = 1.3 mg; AM = 1.3 mg) were not significantly different. Menstrual status did not affect plasma zinc, RBC zinc or plasma copper levels. Physical activity however, affected RBC zinc and plasma copper levels. Bothmore » these parameters were significantly higher in runners. These findings suggest that exercise influences blood zinc and copper levels.« less

Social capital and health in Kenya: A multilevel analysis.

PubMed

Musalia, John

2016-10-01

Despite the acknowledgment that social capital is an important predictor of good health and overall well being in wealthy countries, little empirical research has been conducted in developing countries, particularly in Africa, to examine this relationship. This study examines the association between cognitive (trust) and structural (membership in organization) social capital on health at both the individual and contextual levels. Health was measured using answers to a subjective question on physical health and anxiety/worry suffered by individuals within the last 30 days. This study utilized Afrobarometer data collected in Kenya in 2005 to examine this relationship using multilevel logistic statistical modeling. Upon controlling for socioeconomic and demographic factors, social capital was found to be significantly associated with anxiety/worry and physical health in Kenya. Membership in organizations was associated with increased odds (OR = 1.34, 95%CI: 1.02-1.76) of physical health problems, while individual trust was associated with a 6% (OR = 0.94, 95%CI: 0.90-0.99) reduction in the likelihood of physical health problems. Conversely, generalized trust was associated with a 37% reduction in the odds (OR = 0.63, 95%CI: 0.40-0.99) of anxiety/worry, while individual trust was associated with a 5% reduction (OR = 0.95, 95%CI: 0.90-1.00) of anxiety/worry. With the exception of membership in an organization that exacerbates physical health, both individual level trust and generalized trust were associated with better health outcomes in Kenya. The availability of social organizations at the contextual level was associated with worsening anxiety/worry although the effect size was small. These results show that social capital, particularly trust, is a concept that can apply to different social and cultural contexts and can potentially be harnessed to improve health in settings that suffer from resource poverty. Copyright © 2016 Elsevier Ltd. All rights reserved.

78 FR 13726 - Self-Regulatory Organizations; NYSE Arca, Inc.; Notice of Filing of Amendments No. 1 and No. 2...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-28

... SECURITIES AND EXCHANGE COMMISSION [Release No. 34-68973; File No. SR-NYSEArca-2012-66] Self-Regulatory Organizations; NYSE Arca, Inc.; Notice of Filing of Amendments No. 1 and No. 2 and Order Granting Accelerated Approval of a Proposed Rule Change as Modified by Amendments No. 1 and No. 2 To List and Trade Shares of the iShares Copper Trust...

Neighborhood social capital and infant physical abuse: a population-based study in Japan.

PubMed

Fujiwara, Takeo; Yamaoka, Yui; Kawachi, Ichiro

2016-01-01

We sought to investigate the relationship between neighborhood social capital and infant physical abuse using a population-based sample of women with 4-month-old infants in Japan. A questionnaire was administered to women who participated in a 4-month health checkup program (n = 1277; valid response rate, 80 %). We inquired about their perceptions of the level of trust in their neighborhood (an indicator of "social capital") as well as the availability of support from their personal social networks. Infant physical abuse during the past month was assessed by self-reports of spanking, shaking or smothering. The prevalence of infant physical abuse at 4 months of age was 9.0 % (95 % confidence interval [CI], 7.6-10.7 %). Women living in trusting neighborhoods were less likely to report infant physical abuse compared to those living in areas with low neighborhood trust (odds ratio [OR] 0.25, 95 % CI 0.06-0.97). In addition, women with supportive social networks were less likely to report infant physical abuse (OR 0.59, 95 % CI 0.36-0.99). In addition to one's personal social network, social trust in the neighborhood was independently associated with lowered risk of infant physical abuse. To prevent infant abuse, interventions should consider strengthening community social bonds in addition to strengthening the social network of isolated mothers.

Physical activity: The importance of the extended theory of planned behavior, in type 2 diabetes patients.

PubMed

Ferreira, Gabriela; Pereira, M Graça

2017-09-01

This study focused on the contribution of the extended theory of planned behavior regarding intention to perform physical activity, adherence to physical activity, and its mediator role in the relationship between trust in the physician and adherence to physical activity, in a sample of 120 patients with type 2 diabetes. The results revealed that positive attitudes and perception of control predicted a stronger intention to do physical activity. The intention to do physical activity was the only predictor of adherence to physical activity. Planning mediated the relationship between trust in the physician and adherence. Implications for patients with type 2 diabetes are discussed.

The Price of Distrust: Trust, Anxious Attachment, Jealousy, and Partner Abuse

PubMed Central

Rodriguez, Lindsey M.; DiBello, Angelo M.; Øverup, Camilla S.; Neighbors, Clayton

2017-01-01

Trust is essential to the development of healthy, secure, and satisfying relationships (Simpson, 2007a). Attachment styles provide a theoretical framework for understanding how individuals respond to partner behaviors that either confirm or violate trust (Hazan & Shaver, 1994). The current research aimed to identify how trust and attachment anxiety might interact to predict different types of jealousy and physical and psychological abuse. We expected that when experiencing lower levels of trust, anxiously attached individuals would report higher levels of both cognitive and behavioral jealousy as well as partner abuse perpetration. Participants in committed romantic relationships (N = 261) completed measures of trust, attachment anxiety and avoidance, jealousy, and physical and psychological partner abuse in a cross-sectional study. Moderation results largely supported the hypotheses: Attachment anxiety moderated the association between trust and jealousy, such that anxious individuals experienced much higher levels of cognitive and behavioral jealousy when reporting lower levels of trust. Moreover, attachment anxiety moderated the association between trust and nonphysical violence. These results suggest that upon experiencing distrust in one’s partner, anxiously attached individuals are more likely to become jealous, snoop through a partner’s belongings, and become psychologically abusive. The present research illustrates that particularly for anxiously attached individuals, distrust has cascading effects on relationship cognitions and behavior, and this should be a key area of discussion during therapy. PMID:28386379

75 FR 41247 - Self-Regulatory Organizations; International Securities Exchange, LLC; Notice of Filing and...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-07-15

... Rule Change to List and Trade Options on the Sprott Physical Gold Trust July 8, 2010. Pursuant to... Exchange Commission (``SEC'' or ``Commission'') authorized ISE to list and trade options on the SPDR Gold... list and trade options on the Sprott Physical Gold Trust. \\5\\ See Securities Exchange Act Release No...

The Effect of Nanocopper Additions in a Urea-Formaldehyde Adhesive on the Physical and Mechanical Properties of Particleboard Manufactured from Date Palm Waste

NASA Astrophysics Data System (ADS)

Rangavar, H.; Hoseiny fard, M. S.

2015-03-01

The effect of addition of copper nanoparticles to a urea-formaldehyde (UF) adhesive on the physical and mechanical properties of particleboards manufactured from date palm waste (DPW) was investigated. The variable factors in the study included copper nanoparticles in amounts of 6 and 8 wt.% of the dry mass of wood, pressing durations of 5 and 6 min, and pressing temperatures of 150 and 160°C. The physical and mechanical properties of manufactured boards were measured according to EN standards. The results showed that the addition of copper nanoparticles to the UF adhesive considerably improved the physical and mechanical properties of the boards and shortened the pressing duration. The boards manufactured with 6 wt.% copper nanoparticles in a dry mass of wood mixed with the adhesive and pressed at a temperature of 160°C for 5 min had mechanical properties exceeding the EN312-2 standard levels.

25 CFR 224.137 - What must the Director do if a tribe's noncompliance has resulted in harm or the potential for...

Code of Federal Regulations, 2010 CFR

2010-04-01

... resulted in harm or the potential for harm to a physical trust asset? 224.137 Section 224.137 Indians... AGREEMENTS UNDER THE INDIAN TRIBAL ENERGY DEVELOPMENT AND SELF DETERMINATION ACT Periodic Reviews... potential for harm to a physical trust asset? If, because of the tribe's noncompliance with Federal law or...

[Balance of iron and copper in cadets of military school during physical exercise and next-day rest at different times of the year].

PubMed

Zaĭtseva, I P; Nasolodin, V V; Beliakov, R A; Arshinov, N P; Zaĭtsev, O N; Meshcheriakov, S I

2013-03-01

According to examination, with the help of emission spectrum analysis method, of 24 cadets-athletes of different specialization it was determined that during physical exercise in summer and in winter loss of ferrum and copper with excrements exceeded the intake if these microelements with food. The next day rise of impaction of microelements and decrease of excretion. But despite the positive balance of ferrum and copper, spend of these microelements during physical exercise wasn't compensated for the day of rest. That is why there is a possibility of microelement deficit.

Child Abuse: The Hidden Bruises

MedlinePlus

... poor self image sexual acting out inability to trust or love others aggressive, disruptive, and sometimes illegal ... have trouble with physical closeness, touching, intimacy, and trust as adults. They are also at higher risk ...

25 CFR 224.152 - Must the Secretary always reassume the activities upon a finding of imminent jeopardy to a...

Code of Federal Regulations, 2011 CFR

2011-04-01

... reassume the activities upon a finding of imminent jeopardy to a physical trust asset? (a) The Secretary... 25 Indians 1 2011-04-01 2011-04-01 false Must the Secretary always reassume the activities upon a finding of imminent jeopardy to a physical trust asset? 224.152 Section 224.152 Indians BUREAU OF INDIAN...

25 CFR 224.152 - Must the Secretary always reassume the activities upon a finding of imminent jeopardy to a...

Code of Federal Regulations, 2010 CFR

2010-04-01

... reassume the activities upon a finding of imminent jeopardy to a physical trust asset? (a) The Secretary... 25 Indians 1 2010-04-01 2010-04-01 false Must the Secretary always reassume the activities upon a finding of imminent jeopardy to a physical trust asset? 224.152 Section 224.152 Indians BUREAU OF INDIAN...

Exploring monovalent copper compounds with oxygen and hydrogen

PubMed Central

Korzhavyi, Pavel A.; Soroka, Inna L.; Isaev, Eyvaz I.; Lilja, Christina; Johansson, Börje

2012-01-01

New important applications of copper metal, e.g., in the areas of hydrogen production, fuel cell operation, and spent nuclear fuel disposal, require accurate knowledge of the physical and chemical properties of stable and metastable copper compounds. Among the copper(I) compounds with oxygen and hydrogen, cuprous oxide Cu2O is the only one stable and the best studied. Other such compounds are less known (CuH) or totally unknown (CuOH) due to their instability relative to the oxide. Here we combine quantum-mechanical calculations with experimental studies to search for possible compounds of monovalent copper. Cuprous hydride (CuH) and cuprous hydroxide (CuOH) are proved to exist in solid form. We establish the chemical and physical properties of these compounds, thereby filling the existing gaps in our understanding of hydrogen- and oxygen-related phenomena in Cu metal. PMID:22219370

Medicago truncatula copper transporter 1 (MtCOPT1) delivers copper for symbiotic nitrogen fixation.

PubMed

Senovilla, Marta; Castro-Rodríguez, Rosario; Abreu, Isidro; Escudero, Viviana; Kryvoruchko, Igor; Udvardi, Michael K; Imperial, Juan; González-Guerrero, Manuel

2018-04-01

Copper is an essential nutrient for symbiotic nitrogen fixation. This element is delivered by the host plant to the nodule, where membrane copper (Cu) transporter would introduce it into the cell to synthesize cupro-proteins. COPT family members in the model legume Medicago truncatula were identified and their expression determined. Yeast complementation assays, confocal microscopy and phenotypical characterization of a Tnt1 insertional mutant line were carried out in the nodule-specific M. truncatula COPT family member. Medicago truncatula genome encodes eight COPT transporters. MtCOPT1 (Medtr4g019870) is the only nodule-specific COPT gene. It is located in the plasma membrane of the differentiation, interzone and early fixation zones. Loss of MtCOPT1 function results in a Cu-mitigated reduction of biomass production when the plant obtains its nitrogen exclusively from symbiotic nitrogen fixation. Mutation of MtCOPT1 results in diminished nitrogenase activity in nodules, likely an indirect effect from the loss of a Cu-dependent function, such as cytochrome oxidase activity in copt1-1 bacteroids. These data are consistent with a model in which MtCOPT1 transports Cu from the apoplast into nodule cells to provide Cu for essential metabolic processes associated with symbiotic nitrogen fixation. © 2018 The Authors. New Phytologist © 2018 New Phytologist Trust.

Synthesis and characterization of conducting polyaniline-copper composites.

PubMed

Liu, Aijie; Bac, Luong Huu; Kim, Ji-Soon; Kim, Byoung-Kee; Kim, Jin-Chun

2013-11-01

Conducting polymer composites have many interesting physical properties and important application potentials. Suitable combinations of metal nanoparticles with conductive polymers can result in composite materials having unique physical and chemical properties that can have wide application potential in diverse areas. In this work, copper nanoparticles were fabricated by electrical explosion of wire (EEW) in solution of polyacrylic acid (PAA) and ethanol. Conductive polyaniline-copper (PANI-Cu) composites have been synthesized by in-situ polymerization of aniline in the fabricated copper suspension. Optical absorption in the UV-visible region of these suspensions was measured in the range of 200-900 nm. Morphology and structure of the composites were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD) and Fourier-transform infrared spectra (FTIR). Pure copper nanoparticles were uniformly dispersed into the polymer matrix. Thermal stability of the composites was characterized by thermogravimetric analysis (TGA). Electrical conductivity measurements indicated that the conductivity of the composites was higher than that of pure polyaniline and increased with increasing content of copper.

Two Silene vulgaris copper transporters residing in different cellular compartments confer copper hypertolerance by distinct mechanisms when expressed in Arabidopsis thaliana.

PubMed

Li, Yanbang; Iqbal, Mazhar; Zhang, Qianqian; Spelt, Cornelis; Bliek, Mattijs; Hakvoort, Henk W J; Quattrocchio, Francesca M; Koes, Ronald; Schat, Henk

2017-08-01

Silene vulgaris is a metallophyte of calamine, cupriferous and serpentine soils all over Europe. Its metallicolous populations are hypertolerant to zinc (Zn), cadmium (Cd), copper (Cu) or nickel (Ni), compared with conspecific nonmetallicolous populations. These hypertolerances are metal-specific, but the underlying mechanisms are poorly understood. We investigated the role of HMA5 copper transporters in Cu-hypertolerance of a S. vulgaris copper mine population. Cu-hypertolerance in Silene is correlated and genetically linked with enhanced expression of two HMA5 paralogs, SvHMA5I and SvHMA5II, each of which increases Cu tolerance when expressed in Arabidopsis thaliana. Most Spermatophytes, except Brassicaceae, possess homologs of SvHMA5I and SvHMA5II, which originate from an ancient duplication predating the appearance of spermatophytes. SvHMA5II and the A. thaliana homolog AtHMA5 localize in the endoplasmic reticulum and upon Cu exposure move to the plasma membrane, from where they are internalized and degraded in the vacuole. This resembles trafficking of mammalian homologs and is apparently an extremely ancient mechanism. SvHMA5I, instead, neofunctionalized and always resides on the tonoplast, likely sequestering Cu in the vacuole. Adaption of Silene to a Cu-polluted soil is at least in part due to upregulation of two distinct HMA5 transporters, which contribute to Cu hypertolerance by distinct mechanisms. © 2017 The Authors. New Phytologist © 2017 New Phytologist Trust.

The role of individual differences on perceptions of wearable fitness device trust, usability, and motivational impact.

PubMed

Rupp, Michael A; Michaelis, Jessica R; McConnell, Daniel S; Smither, Janan A

2018-07-01

Lack of physical activity is a severe health concern in the United States with fewer than half of all Americans meeting the recommended weekly physical activity guidelines. Although wearable fitness devices can be effective in motivating people to be active, consumers are abandoning this technology soon after purchase. We examined the impact of several user (i.e. personality, age, computer self-efficacy, physical activity level) and device characteristics (trust, usability, and motivational affordances) on the behavioral intentions to use a wearable fitness device. Novice users completed a brief interaction with a fitness device similar to a first purchase experience before completing questionnaires about their interaction. We found computer self-efficacy, physical activity level, as well as personality traits indirectly increased the desire to use a fitness device and influenced the saliency of perceived motivational affordances. Additionally, trust, usability, and perceived motivational affordances were associated with increased intentions to use fitness devices. Copyright © 2018 Elsevier Ltd. All rights reserved.

Re-building Trust after Physical Restraint During Involuntary Psychiatric Hospitalization.

PubMed

Khatib, Anwar; Ibrahim, Mahajne; Roe, David

2018-06-01

This study attempted to identify the elements which might best minimize the negative consequences of restriction of inpatients and rebuild therapeutic alliance and trust. Through in depth interviews with 15 psychiatric patients who had experience restrained during the last involuntary psychiatric hospitalization. Analysis of the data revealed three major themes with regard to trust between restrained patient and restraining staff members during restriction of the patient's freedom. Duration of Restriction, Contact with a Staff Member while Restrained, Supportive Interactions and Staff's Response to Restricted Patients' Needs were reported by patients as crucial in determining the way restrained is experienced and its later impact. Physical restraint in psychiatric hospitalizations generates many negative feelings and can even be traumatic. The patients interviewed help us learn how to provide more human and therapeutic interactions even in extreme situations of restrain which can be crucial to rebuild therapeutic alliance and trust. Copyright © 2018 Elsevier Inc. All rights reserved.

The effect of nickel addition on antimicrobial, physical, and mechanical properties of copper-nickel alloy against suspensions of Escherichia coli

NASA Astrophysics Data System (ADS)

Nurhayani, Dinni; Korda, Akhmad A.

2015-09-01

Escherichia coli (E. coli) infection can cause serious illness. Humans can be infected by E. coli via contact with the contaminated food and water. Copper and copper alloys were known for their antimicrobial properties and were applied in several healthcare setting as antimicrobial material. However, the people preference in the appearance of stainless steel and aluminum contribute to the low application of copper and its alloy. In this study, the mechanical, physical, and antibacterial properties of copper and copper-nickel alloy compared with stainless steel 304 were tested. The antibacterial activity of stainless steel, copper, and copper-nickel alloy was evaluated by inoculating 7.5 × 106 - 2.5 × 107 CFU/ml suspensions of E. coli. The bacterial colonies were investigated after 0-4 hour incubation at 37°C. The result showed that on the observation time, copper and copper-nickel (Cu-Ni) alloys have antibacterial activity while the bacteria in stainless steel remain existed. The appearance (color / shade) of Cu-Ni alloys in some composition is silvery which is stainless steel-like. For the mechanical properties, copper-nickel alloys have lower hardness than stainless steel (SS 304). This research proved that copper-nickel alloys have the ability to reduce the amount of E. col colonies. The copper content may affect the antibacterial activity but not directly linked. Cu-Ni alloys also have the appearance and mechanical properties that quite similar compared to SS304. Therefore, Cu-Ni alloys have the potential to be applied as substitution or complementary material of SS304 in various applications for preventing the bacterial contamination especially E. coli.

Bulk Nanocrystalline Metals: Review of the Current State of the Art and Future Opportunities for Copper and Copper Alloys

DTIC Science & Technology

2014-05-13

nanocrystalline materials using mechanical alloying, the alloy development and synthesis process for stabilizing these materials at elevated temperatures, and...the physical and mechanical properties of nanocrystalline materials with a focus throughout on nanocrystalline copper and a nanocrystalline Cu-Ta...approaches as well as experimental results for grain growth, grain boundary processes, and deformation mechanisms in nanocrystalline copper are

Shape-dependent bactericidal activity of copper oxide nanoparticle mediated by DNA and membrane damage

DOE Office of Scientific and Technical Information (OSTI.GOV)

Laha, Dipranjan; Pramanik, Arindam; Laskar, Aparna

Highlights: • Spherical and sheet shaped copper oxide nanoparticles were synthesized. • Physical characterizations of these nanoparticles were done by TEM, DLS, XRD, FTIR. • They showed shape dependent antibacterial activity on different bacterial strain. • They induced both membrane damage and ROS mediated DNA damage in bacteria. - Abstract: In this work, we synthesized spherical and sheet shaped copper oxide nanoparticles and their physical characterizations were done by the X-ray diffraction, fourier transform infrared spectroscopy, transmission electron microscopy and dynamic light scattering. The antibacterial activity of these nanoparticles was determined on both gram positive and gram negative bacterial. Sphericalmore » shaped copper oxide nanoparticles showed more antibacterial property on gram positive bacteria where as sheet shaped copper oxide nanoparticles are more active on gram negative bacteria. We also demonstrated that copper oxide nanoparticles produced reactive oxygen species in both gram negative and gram positive bacteria. Furthermore, they induced membrane damage as determined by atomic force microscopy and scanning electron microscopy. Thus production of and membrane damage are major mechanisms of the bactericidal activity of these copper oxide nanoparticles. Finally it was concluded that antibacterial activity of nanoparticles depend on physicochemical properties of copper oxide nanoparticles and bacterial strain.« less

Preschoolers show less trust in physically disabled or obese informants

PubMed Central

Ma, Lili

2015-01-01

This research examined whether preschool-aged children show less trust in physically disabled or obese informants. In Study 1, when learning about novel physical activities and facts, 4- and 5-year-olds preferred to endorse the testimony of a physically abled, non-obese informant rather than a physically disabled or obese one. In Study 2, after seeing that the physically disabled or obese informant was previously reliable whereas the physically abled, non-obese one was unreliable, 4- and 5-year-olds did not show a significant preference for either informant. We conclude that in line with the literature on children’s negative stereotypes of physically disabled or obese others, preschoolers are biased against these individuals as potential sources of new knowledge. This bias is robust in that past reliability might undermine its effect on children, but cannot reverse it. PMID:25610413

The california poppy (eschscholtzia mexicana) as a copper indicator plant - a new example

USGS Publications Warehouse

Chaffee, M.A.; Gale, C.W.

1976-01-01

The abundance and distribution of the California poppy (Eschscholtzia mexicana) correlates closely with the copper-rich outcrop of a small porphyry-type deposit in Arizona. Chemical factors are probably more important than physical factors in determining why this species is sometimes found as a copper indicator plant. ?? 1976.

Particularized trust, generalized trust, and immigrant self-rated health: cross-national analysis of World Values Survey.

PubMed

Kim, H H-S

2018-05-01

This research examined the associations between two types of trust, generalized and particularized, and self-rated health among immigrants. Data were drawn from the World Values Survey (WVS6), the latest wave of cross-sectional surveys based on face-to-face interviews. The immigrant subsample analyzed herein contains 3108 foreign-born individuals clustered from 51 countries. Given the hierarchically nested data, two-level logistic regressions models were estimated using HLM (Hierarchical Linear Modeling) 7.1. At the individual level, net of socio-economic and demographic factors (age, gender, marital status, education, income, neighborhood security, and subjective well-being), particularized trust was positively related to physical health (odds ratio [OR] = 1.11, P < .001). Generalized trust, however, was not a significant predictor. At the country level, based on alternative models, the aggregate measure of particularized trust was negatively associated with subjective health. The odds of being healthy were on average about 30% lower. The interdisciplinary literature on social determinants of health has largely focused on the salubrious impact of trust and other forms of social capital on physical well-being. Many previous studies based on general, not immigrant, populations also did not differentiate between generalized and particularized types of trust. Results from this study suggest that this conceptual distinction is critical in understanding how and to what extent the two are differentially related to immigrant well-being across multiple levels of analysis. Copyright © 2018 The Royal Society for Public Health. Published by Elsevier Ltd. All rights reserved.

Victimization and Vulnerability: A Study of Incarceration, Interpersonal Trauma, and Patient-Physician Trust.

PubMed

Junewicz, Alexandra; Kleinert, Kelly J; Dubler, Nancy Neveloff; Caplan, Arthur

2017-09-01

Despite the critical importance of patient-physician trust, it may be compromised among vulnerable patients, such as (1) incarcerated patients and (2) those patients who have been victims of trauma. The purpose of this study was to examine patient-physician trust among forensic and civilian psychiatric inpatient populations and to explore whether it varied based on a patient's history of incarceration and/or victimization. A trust survey (WFPTS) and a trauma instrument (LEC-5) were administered to 93 patients hospitalized on forensic and civilian psychiatric hospital units in a large, urban public hospital. Results showed no difference in patient-physician trust between incarcerated and civilian patients. Similarly, there was no effect of a history of physical assault or sexual assault on ratings of patient-physician trust. However, the hospitalized civilian and forensic patients who reported being the victim of weapons assault had significantly lower patient-physician trust scores than their counterparts.

Towards the discovery of novel genetic component involved in stress resistance in Arabidopsis thaliana.

PubMed

Juraniec, Michal; Lequeux, Hélène; Hermans, Christian; Willems, Glenda; Nordborg, Magnus; Schneeberger, Korbinian; Salis, Pietrino; Vromant, Maud; Lutts, Stanley; Verbruggen, Nathalie

2014-02-01

The exposure of plants to high concentrations of trace metallic elements such as copper involves a remodeling of the root system, characterized by a primary root growth inhibition and an increase in the lateral root density. These characteristics constitute easy and suitable markers for screening mutants altered in their response to copper excess. A forward genetic approach was undertaken in order to discover novel genetic factors involved in the response to copper excess. A Cu(2+) -sensitive mutant named copper modified resistance1 (cmr1) was isolated and a causative mutation in the CMR1 gene was identified by using positional cloning and next-generation sequencing. CMR1 encodes a plant-specific protein of unknown function. The analysis of the cmr1 mutant indicates that the CMR1 protein is required for optimal growth under normal conditions and has an essential role in the stress response. Impairment of the CMR1 activity alters root growth through aberrant activity of the root meristem, and modifies potassium concentration and hormonal balance (ethylene production and auxin accumulation). Our data support a putative role for CMR1 in cell division regulation and meristem maintenance. Research on the role of CMR1 will contribute to the understanding of the plasticity of plants in response to changing environments. © 2013 The Authors. New Phytologist © 2013 New Phytologist Trust.

Combinations of social participation and trust, and association with health status-an Australian perspective.

PubMed

Williams, Susan L; Ronan, Kevin

2014-12-01

A limited number of studies have examined the 'miniaturization of community' model which is based on belief that 'new' individualistic, and narrower forms of social participation, do not promote generalized trust in others. Little is known about miniaturization of community and self-reported health, physical health and psychological health in Australia. Data from a 2009 computer-assisted-telephone-interview survey was used to investigate generalized trust, social participation and health-related quality of life in a regional Australian population (n = 1273; mean age 51.2 years). Logistic regression analyses were performed to investigate the associations between generalized trust, social participation and poor self-reported health (global self-rated, psychological and physical), and included four social participation/trust categories. A majority (67%) reported high generalized trust of others, 54% were categorized as high social participators. Miniaturization of community was a risk factor for poor self-rated psychological health across genders, and a risk factor for poor self-rated health for males. For women, low social participation (irrespective of trust level) was associated with poor self-reported health. Given current and previous findings, there is a need for further research in a range of contexts which explores the underlying concept of miniaturization of community, that is, the changes in social participation and social networks which may negatively impact community health. © The Author (2013). Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

A Protocol Layer Trust-Based Intrusion Detection Scheme for Wireless Sensor Networks

PubMed Central

Wang, Jian; Jiang, Shuai; Fapojuwo, Abraham O.

2017-01-01

This article proposes a protocol layer trust-based intrusion detection scheme for wireless sensor networks. Unlike existing work, the trust value of a sensor node is evaluated according to the deviations of key parameters at each protocol layer considering the attacks initiated at different protocol layers will inevitably have impacts on the parameters of the corresponding protocol layers. For simplicity, the paper mainly considers three aspects of trustworthiness, namely physical layer trust, media access control layer trust and network layer trust. The per-layer trust metrics are then combined to determine the overall trust metric of a sensor node. The performance of the proposed intrusion detection mechanism is then analyzed using the t-distribution to derive analytical results of false positive and false negative probabilities. Numerical analytical results, validated by simulation results, are presented in different attack scenarios. It is shown that the proposed protocol layer trust-based intrusion detection scheme outperforms a state-of-the-art scheme in terms of detection probability and false probability, demonstrating its usefulness for detecting cross-layer attacks. PMID:28555023

A Protocol Layer Trust-Based Intrusion Detection Scheme for Wireless Sensor Networks.

PubMed

Wang, Jian; Jiang, Shuai; Fapojuwo, Abraham O

2017-05-27

This article proposes a protocol layer trust-based intrusion detection scheme for wireless sensor networks. Unlike existing work, the trust value of a sensor node is evaluated according to the deviations of key parameters at each protocol layer considering the attacks initiated at different protocol layers will inevitably have impacts on the parameters of the corresponding protocol layers. For simplicity, the paper mainly considers three aspects of trustworthiness, namely physical layer trust, media access control layer trust and network layer trust. The per-layer trust metrics are then combined to determine the overall trust metric of a sensor node. The performance of the proposed intrusion detection mechanism is then analyzed using the t-distribution to derive analytical results of false positive and false negative probabilities. Numerical analytical results, validated by simulation results, are presented in different attack scenarios. It is shown that the proposed protocol layer trust-based intrusion detection scheme outperforms a state-of-the-art scheme in terms of detection probability and false probability, demonstrating its usefulness for detecting cross-layer attacks.

Physical characterization and recovery of corroded fingerprint impressions from postblast copper pipe bomb fragments.

PubMed

Bond, John W; Brady, Thomas F

2013-05-01

Pipe bombs made from 1 mm thick copper pipe were detonated with a low explosive power powder. Analysis of the physical characteristics of fragments revealed that the copper had undergone work hardening with an increased Vickers Hardness of 107HV1 compared with 80HV1 for unexploded copper pipe. Mean plastic strain prior to fracture was calculated at 0.28 showing evidence of both plastic deformation and wall thinning. An examination of the external surface showed microfractures running parallel with the length of the pipe at approximately 100 μm intervals and 1-2 μm in width. Many larger fragments had folded "inside out" making the original outside surface inaccessible and difficult to fold back through work hardening. A visual examination for fingerprint corrosion revealed ridge details on several fragments that were enhanced by selective digital mapping of colors reflected from the surface of the copper. One of these fingerprints was identified partially to the original donor. © 2013 American Academy of Forensic Sciences.

Role of plastic deformation in wear of copper and copper - 10-percent-aluminum alloy in cryogenic fuels

NASA Technical Reports Server (NTRS)

Bill, R. C.; Wisander, D. W.

1973-01-01

High-purity copper specimens and a copper-aluminum (10%) alloy specimen were subjected to sliding against Type 440 C in cryogenic fuel environments. It was found that virtually all wear occurred by the plastic deformation of a recrystallized layer extending to about 10 micrometers below the wear scar surface of the copper or copper alloy. The wear debris was in the form of a layered structure adhering to the exit region of the wear scar. Measurements on the high purity copper specimens indicated that the wear rate was proportional to the applied load and to the sliding velocity squared. A physical model of the wear process is proposed to account for these observations.

Social capital, trust in health information, and acceptance of Measles-Rubella vaccination campaign in Tamil Nadu: A case-control study.

PubMed

Palanisamy, B; Gopichandran, V; Kosalram, K

2018-06-18

Parents' decision about vaccination of children is influenced by social relationships and sources of information. The aim of this study was to assess the influence of social capital and trust in health information on the status of Measles-Rubella (MR) vaccination campaign in Tamil Nadu. This was a case-control study carried out in Kancheepuram district in Tamil Nadu where the MR vaccination campaign offered by Government of Tamil Nadu had poor acceptance. Cases were parents of children who had refused the MR vaccine and controls were parents having children in the same age group who had accepted the vaccine. Data on social capital and trust in health information were collected by using social capital scale developed by the researchers and trust in the source of information was measured by using simple questions on the level of trust in the information source. Nonadministration of MR vaccine was high among young parents and parents of younger children. Vaccine acceptance was higher when it was offered at school (P < 0.000) and also among parents who trusted school teachers (P < 0.003) and other school children (P < 0.014) as source of information. MR vaccine acceptance was less among parents who trusted social media and WhatsApp information. Greater levels of health-related physical social capital led to greater vaccine hesitancy. Multivariate analysis revealed that greater the age of the child, better parental attitudes toward vaccination, poorer health-related physical social capital, and greater trust in health information provided by school teachers led to overall greater acceptance of the MR vaccine. Strong homogeneous bonding social capital had a negative influence on MR vaccine acceptance. Schools and school teachers played a vital role in influencing parental decision to vaccinate.

An evaluation of a lathe-cut high-copper amalgam alloy.

PubMed

Knibbs, P J; Plant, C G; Shovelton, D S; Jones, P A

1987-09-01

Modification of an amalgam alloy may give rise to improved physical properties. The physical properties of a newly formulated, single-composition lathe-cut amalgam alloy were studied and found to be superior to those of a conventional lathe-cut amalgam alloy. However, such modification in formulation may result in changes in the clinical handling properties of the material. The high-copper amalgam alloy was assessed by a panel of general practitioners who found that the general handling properties of the material were similar to those of conventional lathe-cut amalgam alloys. The longer term performance of the high-copper alloy was assessed by means of a blind, controlled clinical trial carried out by two operators. A 1-year assessment of the resulting restorations and tooth replicas could not distinguish between the high-copper alloy and a conventional alloy. The two alloys had both given good clinical results.

Physical, chemical and antimicrobial characterization of copper-bearing material

NASA Astrophysics Data System (ADS)

Li, Bowen; Hwang, Jiann-Yang; Drelich, Jaroslaw; Popko, Domenic; Bagley, Susan

2010-12-01

Arsenic, cadmium, copper, mercury, silver, and zinc are elements with strong antimicrobial properties. Among them, copper is more environmentally friendly and has both good antibacterial and antifungal properties. It has been shown that copper can even be effective against new viruses such as avian influenza (H5N1). Development of copper-bearing materials for various applications, therefore, is receiving increased attention. The Keweenaw Peninsula of Michigan was the largest native copper mining regions of North America at the turn of the 20th century. Copper was extracted by mining the copper-rich basaltic rock, and steamdriven stamp mills were used to process a great volume of low-grade ores, resulting in huge amounts of crushed waste ore called stamp sands. Approximately 500 million tons of stamp sand were discarded. This material is investigated in this study as an example for the development of antimicrobial materials.

Physical and thermal processing of Waste Printed Circuit Boards aiming for the recovery of gold and copper.

PubMed

Ventura, E; Futuro, A; Pinho, S C; Almeida, M F; Dias, J M

2018-06-20

The recovery of electronic waste to obtain secondary raw materials is a subject of high relevance in the context of circular economy. Accordingly, the present work relies on the evaluation of mining separation/concentration techniques (comminution, size screening, magnetic separation and gravity concentration) alone as well as combined with thermal pre-treatment to recover gold and copper from Waste Printed Circuit Boards. For that purpose, Waste Printed Circuit Boards were subjected to physical processing (comminution, size screening in 6 classes from <0.425 mm to > 6.70 mm, magnetic separation and gravity concentration) alone and combined with thermal treatment (200-500 °C), aiming the recovery of gold and copper. Mixed motherboards and graphic cards (Lot 1 and 3) and highly rich components (connectors separated from memory cards, Lot 2) were analyzed. Gold and copper concentrations were determined before and after treatment. Before treatment, concentrations from 0.01 to 0.6 % wt. and from 9 to 20 % wt. were found for gold and copper respectively. The highest concentrations were observed in the size fractions between 0.425 and 1.70 mm. The highest copper concentration was around 35 % wt. (class 0.425-0.85 mm) and when analyzing memory card connectors alone, gold concentrations reached almost 2% in the same class, reflecting the interest of separating such components. The physical treatment alone was more effective for Lot 1/3, compared to Lot 2, allowing recoveries of 67 % wt. and 87 % wt. for gold and copper respectively, mostly due to differences in particles size and shape. The thermal treatment showed unperceptive influence on gold concentration but significant effect for copper concentration, mostly attributed to the size of the copper particles. Concentrations increased in a factor of around 10 when the thermal treatment was performed at 300 °C for the larger particles (1.70-6.70 mm); the best results were obtained at 400 °C for the other sizes, when the highest rate of thermal decomposition of the material occurred. Copyright © 2018 Elsevier Ltd. All rights reserved.

A trust evaluation algorithm for wireless sensor networks based on node behaviors and D-S evidence theory.

PubMed

Feng, Renjian; Xu, Xiaofeng; Zhou, Xiang; Wan, Jiangwen

2011-01-01

For wireless sensor networks (WSNs), many factors, such as mutual interference of wireless links, battlefield applications and nodes exposed to the environment without good physical protection, result in the sensor nodes being more vulnerable to be attacked and compromised. In order to address this network security problem, a novel trust evaluation algorithm defined as NBBTE (Node Behavioral Strategies Banding Belief Theory of the Trust Evaluation Algorithm) is proposed, which integrates the approach of nodes behavioral strategies and modified evidence theory. According to the behaviors of sensor nodes, a variety of trust factors and coefficients related to the network application are established to obtain direct and indirect trust values through calculating weighted average of trust factors. Meanwhile, the fuzzy set method is applied to form the basic input vector of evidence. On this basis, the evidence difference is calculated between the indirect and direct trust values, which link the revised D-S evidence combination rule to finally synthesize integrated trust value of nodes. The simulation results show that NBBTE can effectively identify malicious nodes and reflects the characteristic of trust value that 'hard to acquire and easy to lose'. Furthermore, it is obvious that the proposed scheme has an outstanding advantage in terms of illustrating the real contribution of different nodes to trust evaluation.

Utilization of turkey manure as granular activated carbon: physical, chemical and adsorptive properties.

PubMed

Lima, Isabel; Marshall, Wayne E

2005-01-01

The high availability of large quantities of turkey manure generated from turkey production makes it an attractive feedstock for carbon production. Pelletized samples of turkey litter and cake were converted to granular activated carbons (GACs) by steam activation. Water flow rate and activation time were changed to produce a range of activation conditions. The GACs were characterized for select physical (yield, surface area, bulk density, attrition), chemical (pH, surface charge) and adsorptive properties (copper ion uptake). Carbon physical and adsorptive properties were dependent on activation time and quantity of steam used as activant. Yields varied from 23% to 37%, surface area varied from 248 to 472 m(2)/g and copper ion adsorption varied from 0.72 to 1.86 mmol Cu(2+)/g carbon. Copper ion adsorption greatly exceeded the values for two commercial GACs. GACs from turkey litter and cake show considerable potential to remove metal ions from water.

Developing radiopure copper alloys for high strength low background applications

NASA Astrophysics Data System (ADS)

Suriano, A. M.; Howard, S. M.; Christofferson, C. D.; Arnquist, I. J.; Hoppe, E. W.

2018-01-01

High purity copper continues to play an important role for ultra-low-background detectors. Measurements of rare nuclear decays, e.g. neutrinoless double-beta decay, and searches for dark matter can require construction materials that have high thermal and electrical conductivity with bulk radiopurity less than one micro-Becquerel per kilogram. However, experiments currently using components constructed of radiopure electroformed copper struggle with design of structural and mechanical parts due to the physical properties of pure copper. A higher strength material which possesses many of the favorable attributes of copper yet remains radiopure is desired. A number of copper alloying candidates which may provide improved mechanical performance and adequate radiopurity were considered. Development of an electrodeposited copper-chrome alloy from additive-free electrolyte systems is discussed. The resulting material is shown to possess high strength and meets the aforementioned radiopurity goals.

Culture, Identity, and Structure in Social Exchange: A Web-Based Trust Experiment in the United States and Japan

ERIC Educational Resources Information Center

Kuwabara, Ko; Willer, Robb; Macy, Michael W.; Mashima, Rie; Terai, Shigeru; Yamagishi, Toshio

2007-01-01

Cross-cultural trust and cooperation are important concerns for international markets, political cooperation, and cultural exchange. Until recently, this problem was difficult to study under controlled conditions due to the inability to conduct experiments involving interaction between participants located in physically distant locations. We…

Copper Doping of Zinc Oxide by Nuclear Transmutation

DTIC Science & Technology

2014-03-27

Copper Doping of Zinc Oxide by Nuclear Transmutation THESIS Matthew C. Recker, Captain, USAF AFIT-ENP-14-M-30 DEPARTMENT OF THE AIR FORCE AIR...NUCLEAR TRANSMUTATION THESIS Presented to the Faculty Department of Engineering Physics Graduate School of Engineering and Management Air Force...COPPER DOPING OF ZINC OXIDE BY NUCLEAR TRANSMUTATION Matthew C. Recker, BS Captain, USAF Approved: //signed// 27 February 2014 John W. McClory, PhD

Establishment of safety paradigms and trust in emerging adult relationships.

PubMed

Mullinax, Margo; Sanders, Stephanie; Higgins, Jenny; Dennis, Barbara; Reece, Michael; Fortenberry, J Dennis

2016-08-01

There is a critical need to understand the interplay between relationship trust and public health outcomes. The purpose of this study was to develop an understanding of emerging adult women's processes of establishing trust in sexual relationships. Twenty-five women aged 18-24 years participated in semi-structured interviews. Throughout the interviews, women compared and contrasted experiences in which they felt comfortable engaging in sexual intercourse with a partner versus times in which they did not feel comfortable. Analysis was based on a critical qualitative research orientation. When asked to speak to instances when they felt comfortable having sex, most women spoke about relationship trust. Many participants conceptualised trust based on past experiences with bad relationships or sexual violence. Based on their previous experiences of feeling unsafe or undervalued, emotional and physical security became prioritised in relationship development. Trust was developed through friendship, communication over time, and through shared life experiences. This research is among the first to qualitatively investigate trust formation and other impersonal dynamics related to sexual health decision-making. Insights from this study should be translated into future action by public health practitioners to promote healthy sexual relationships and communication about sexual health topics as a form of trust building.

Release of Micronized Copper Particles from Pressure ...

EPA Pesticide Factsheets

Micronized copper pressure treated lumber (PTL) has recently been introduced to the consumer market as a replacement for ionized copper PTL. The presence of particulate rather than aqueous copper raises concerns about the exposure of humans as well as the environment to the particles. Two common pathways of exposure, leaching during contact with water and transfer during physical contact, were investigated to gage potential human and environmental risk during intended use of the product. Characterization, leaching tests, and wipe tests were conducted on two representative formulations of micronized copper PTL (micronized copper azole or MCA) to quantify the levels of copper present in the treated material and the amount of copper released during use as well as to determine the form (particle or ion) of the copper after it was released. Additionally, an ionized copper pressure treated wood (alkaline copper azole or ACA) was tested for comparison. The characterization showed that copper carbonate is the primary particle form in the MCA treated wood, but other forms are also present, particularly in the MCA-1 formulation, which contained a large amount of organically complexed copper. Microscopy showed that MCA-1 contained particles roughly half the size of MCA-2. The leaching results indicate that mostly (> ~95%) ionic copper is released from the MCA wood and that the particulate copper that was released is attached to cellulose and not free in solution. A sma

Cyberbiosecurity: From Naive Trust to Risk Awareness.

PubMed

Peccoud, Jean; Gallegos, Jenna E; Murch, Randall; Buchholz, Wallace G; Raman, Sanjay

2018-01-01

The cyber-physical nature of biotechnology raises unprecedented security concerns. Computers can be compromised by encoding malware in DNA sequences, and biological threats can be synthesized using publicly available data. Trust within the biotechnology community creates vulnerabilities at the interface between cyberspace and biology. Awareness is a prerequisite to managing these risks. Copyright © 2017 Elsevier Ltd. All rights reserved.

Healing, Mental Energy in the Physics Classroom: Energy Conceptions and Trust in Complementary and Alternative Medicine in Grade 10-12 Students

NASA Astrophysics Data System (ADS)

Svedholm, Annika M.; Lindeman, Marjaana

2013-03-01

Lay conceptions of energy often conflict with scientific knowledge, hinder science learning and scientific literacy, and provide a basis for ungrounded beliefs. In a sample of Finnish upper secondary school students, energy was attributed with features of living and animate beings and thought of as a mental property. These ontologically confused conceptions (OCC) were associated with trust in complementary and alternative medicine (CAM), and independent of scientifically valid conceptions. Substance-based energy conceptions followed the correlational pattern of OCC, rather than scientific conceptions. OCC and CAM decreased both during the regular school physics curriculum and after a lesson targeted at the ontological confusions. OCC and CAM were slightly less common among students with high actively open-minded thinking, low trust in intuition and high need for cognition. The findings are discussed in relation to the goals of scientific education.

Creating a positive workplace culture.

PubMed

Sergeant, Jenny; Laws-Chapman, Colette

2012-02-01

This article considers the link between emotional resilience and the mental and physical wellbeing of healthcare staff, and how this affects leadership and patient care. The authors outline six steps to building and sustaining emotional resilience. In two NHS surveys (Boorman 2009, Healthcare Commission 2010) staff reported that their physical health and emotional wellbeing affected their ability to undertake daily activities and their ability to care for patients. Some NHS trusts are addressing staff wellbeing through emotional resilience training. Guy's and St Thomas' NHS Foundation Trust, London, for example, includes it in its preceptorship programme, which supports transition from student to staff nurse.

Leaching behaviour and mechanical properties of copper flotation waste in stabilized/solidified products.

PubMed

Mesci, Başak; Coruh, Semra; Ergun, Osman Nuri

2009-02-01

This research describes the investigation of a cement-based solidification/stabilization process for the safe disposal of copper flotation waste and the effect on cement properties of the addition of copper flotation waste (CW) and clinoptilolite (C). In addition to the reference mixture, 17 different mixtures were prepared using different proportions of CW and C. Physical properties such as setting time, specific surface area and compressive strength were determined and compared to a reference mixture and Turkish standards (TS). Different mixtures with the copper flotation waste portion ranging from 2.5 to 12.5% by weight of the mixture were tested for copper leachability. The results show that as cement replacement materials especially clinoptilolite had clear effects on the mechanical properties. Substitution of 5% copper flotation waste for Portland cement gave a similar strength performance to the reference mixture. Higher copper flotation waste addition such as 12.5% replacement yielded lower strength values. As a result, copper flotation waste and clinoptilolite can be used as cementitious materials, and copper flotation waste also can be safely stabilized/solidified in a cement-based solidification/stabilization system.

Production and Physical Metallurgy of Pure Metals - Part V

DTIC Science & Technology

1960-07-25

crucible . The essence of arc melting consists in the ignit- ion of an arc between the specimen placed in an intensively cooled copper crucible , and...water-cooled, and the cooling can be regulated by valves. -14- Universal laboratory arc furnace with cooled copper crucible : LOsend continued on next pag...furnaces by ordinary methods is very difficult and re- quires a fundamentally new method of melting. Such a method is arc melting in a water-cooled copper

Binding of copper to lysozyme: Spectroscopic, isothermal titration calorimetry and molecular docking studies

NASA Astrophysics Data System (ADS)

Jing, Mingyang; Song, Wei; Liu, Rutao

2016-07-01

Although copper is essential to all living organisms, its potential toxicity to human health have aroused wide concerns. Previous studies have reported copper could alter physical properties of lysozyme. The direct binding of copper with lysozyme might induce the conformational and functional changes of lysozyme and then influence the body's resistance to bacterial attack. To better understand the potential toxicity and toxic mechanisms of copper, the interaction of copper with lysozyme was investigated by biophysical methods including multi-spectroscopic measurements, isothermal titration calorimetry (ITC), molecular docking study and enzyme activity assay. Multi-spectroscopic measurements proved that copper quenched the intrinsic fluorescence of lysozyme in a static process accompanied by complex formation and conformational changes. The ITC results indicated that the binding interaction was a spontaneous process with approximately three thermodynamical binding sites at 298 K and the hydrophobic force is the predominant driven force. The enzyme activity was obviously inhibited by the addition of copper with catalytic residues Glu 35 and Asp 52 locating at the binding sites. This study helps to elucidate the molecular mechanism of the interaction between copper and lysozyme and provides reference for toxicological studies of copper.

Faith, Practice, and the Trust of Community: A Profile of the Meeting School.

ERIC Educational Resources Information Center

Hawthorn, Margaret

2000-01-01

The Meeting School is a boarding high school in New Hampshire based on the principles of the Religious Society of Friends, which emphasize simplicity, honesty, the peaceful resolution of conflict, the dignity of physical labor, mutual trust, and care for each other and the earth. Describes how students and faculty participate fully in the life of…

Placebo treatment facilitates social trust and approach behavior.

PubMed

Yan, Xinyuan; Yong, Xue; Huang, Wenhao; Ma, Yina

2018-05-29

Placebo effect refers to beneficial changes induced by the use of inert treatment, such as placebo-induced relief of physical pain and attenuation of negative affect. To date, we know little about whether placebo treatment could facilitate social functioning, a crucial aspect for well-being of a social species. In the present study, we develop and validate a paradigm to induce placebo effects on social trust and approach behavior (social placebo effect), and show robust evidence that placebo treatment promotes trust in others and increases preference for a closer interpersonal distance. We further examine placebo effects in real-life social interaction and show that placebo treatment makes single, but not pair-bonded, males keep closer to an attractive first-met female and perceive less social anxiety in the female. Finally, we show evidence that the effects of placebo treatment on social trust and approach behavior can be as strong as the effect of intranasal administration of oxytocin, a neuropeptide known for its function in facilitating social cognition and behavior. The finding of the social placebo effect extends our understanding of placebo effects on improvement of physical, mental, and social well-being and suggests clinical potentials in the treatment of social dysfunction.

Establishment of safety paradigms and trust in emerging adult relationships

PubMed Central

Mullinax, Margo; Sanders, Stephanie; Higgins, Jenny; Dennis, Barbara; Reece, Michael; Fortenberry, J. Dennis

2016-01-01

There is a critical need to understand the interplay between relationship trust and public health outcomes. The purpose of this study was to develop an understanding of emerging adult women’s processes of establishing trust in sexual relationships. Twenty-five women aged 18–24 years participated in semi-structured interviews. Throughout the interviews, women compared and contrasted experiences in which they felt comfortable engaging in sexual intercourse with a partner versus times in which they did not feel comfortable. Analysis was based on a critical qualitative research orientation. When asked to speak to instances when they felt comfortable having sex, most women spoke about relationship trust. Many participants conceptualised trust based on past experiences with bad relationships or sexual violence. Based on their previous experiences of feeling unsafe or undervalued, emotional and physical security became prioritised in relationship development. Trust was developed through friendship, communication over time, and through shared life experiences. This research is among the first to qualitatively investigate trust formation and other impersonal dynamics related to sexual health decision-making. Insights from this study should be translated into future action by public health practitioners to promote healthy sexual relationships and communication about sexual health topics as a form of trust building. PMID:26943023

What's in the Walls: Copper, Fiber, or Coaxial Wiring?

ERIC Educational Resources Information Center

Weiss, Andrew M.

1995-01-01

Presents planning guidelines for wiring specifications for K-12 schools by reviewing advantages and disadvantages of using copper, fiber-optic, and coaxial wire. Addresses the future of network wiring and educational technology, and makes recommendations. A sidebar describes the physical appearance of different types of wire and a table compares…

Hybrid Fiber/Copper LAN Meets School's 25-Year Networking Requirements.

ERIC Educational Resources Information Center

Petruso, Sam; Humes, Vince

1994-01-01

Describes an innovative new curriculum being implemented at Walnut Creek Middle School (Pennsylvania) and an advanced networked computer environment that supports it now and will also meet future needs. Topics addressed include physical facilities; networking goals, both short-term and long-term; fiber-optic cable versus copper; and future…

Experimental Consequences of Mottness in High-Temperature Copper-Oxide Superconductors

ERIC Educational Resources Information Center

Chakraborty, Shiladitya

2009-01-01

It has been more than two decades since the copper-oxide high temperature superconductors were discovered. However, building a satisfactory theoretical framework to study these compounds still remains one of the major challenges in condensed matter physics. In addition to the mechanism of superconductivity, understanding the properties of the…

The enemies of trust.

PubMed

Galford, Robert; Drapeau, Anne Seibold

2003-02-01

Researchers have established that trust is critical to organizational effectiveness. Being trustworthy yourself, however, does not guarantee that you are capable of building trust in an organization. That takes old-fashioned managerial virtues like consistency, clear communication, and a willingness to tackle awkward questions. It also requires a good defense: You must protect trust from its enemies. Any act of bad management erodes trust, so the list of potential enemies is endless. Among the most common enemies of trust, though, are inconsistent messages from top management, inconsistent standards, a willingness to tolerate incompetence or bad behavior, dishonest feedback, a failure to trust others to do good work, a tendency to ignore painful or politically charged situations, consistent corporate underperformance, and rumors. Fending off these enemies must be at the top of every chief executive's agenda. But even with constant vigilance, an organization and its leaders will sometimes lose people's trust. During a crisis, managers should enlist the help of an objective third party--chances are you won't be thinking clearly--and be available physically and emotionally. If you "go dark" in the face of a crisis, employees will worry about the company's survival, about their own capacity to cope, and about your abilities as a leader. And if trust has broken down so badly that your only choice is to start over, you can do so by figuring out exactly how the breach of trust happened, ascertaining the depth and breadth of the loss, owning up to the loss instead of downplaying it, and identifying as precisely as possible the specific changes you must make to rebuild trust.

Copper wire theft and high voltage electrical burns

PubMed Central

Francis, Eamon C; Shelley, Odhran P

2014-01-01

High voltage electrical burns are uncommon. However in the midst of our economic recession we are noticing an increasing number of these injuries. Copper wire is a valuable commodity with physical properties as an excellent conductor of electricity making it both ubiquitous in society and prized on the black market. We present two consecutive cases referred to the National Burns Unit who sustained life threatening injuries from the alleged theft of high voltage copper wire and its omnipresence on an international scale. PMID:25356371

Mechanical and electrical properties of laminates for high performance printed wiring boards

NASA Astrophysics Data System (ADS)

Guiles, Chester L.

The physical and electrical properties of laminate boards intended for high-performance applications are reviewed with particular reference to the coefficient of thermal expansion, dielectric constant, and characteristic impedance. It is shown, in particular, that the electrical properties can be tailored to some extent by using various conbinations of basic board materials, such as copper foil, fiberglass fabric, glass fabric, epoxy resin, polyimide resin, aluminum sheet, Kevlar and quartz fabrics, copper-invar-copper, and alumina-ceramic.

Copper wire theft and high voltage electrical burns.

PubMed

Francis, Eamon C; Shelley, Odhran P

2014-01-01

High voltage electrical burns are uncommon. However in the midst of our economic recession we are noticing an increasing number of these injuries. Copper wire is a valuable commodity with physical properties as an excellent conductor of electricity making it both ubiquitous in society and prized on the black market. We present two consecutive cases referred to the National Burns Unit who sustained life threatening injuries from the alleged theft of high voltage copper wire and its omnipresence on an international scale.

Study of a Waveguide Antenna Implemented in Laminated Material

DTIC Science & Technology

2002-12-01

CRC had some experience with fabricating microwave circuits with laminated copper clad dielectric. There was bonding material (CLTE-P) that could be...PEC) and copper walls in Table 4. For all of the simulations, the physical parameters (width= 5.13 mm, height=3.40 mm, length=24.27 mm) and the... copper waveguide. As shown in Chapter 2, it is also possible to determine the losses from the conductor and dielectric (Equations 2.6 - 2.8) of a RWG

(Dis)placing trust: the long-term effects of job displacement on generalised trust over the adult lifecourse.

PubMed

Laurence, James

2015-03-01

Increasing rates of job displacement (i.e. involuntary job loss from redundancy, downsizing, restructuring) have been suggested to be a key driver of declining macro-levels of generalised trust. This article undertakes the first test of how job displacement affects individuals' tendencies to (dis)trust over the adult lifecourse, using two-waves of the Great Britain National Child Development Study cohort data, on a sample of n=6840 individuals. Applying both lagged dependent variable logistic regression and two-wave change-score models, experiencing job displacement between the ages of 33 and 50 appears to significantly scar individuals' generalised trust, with depressed trust observable at least nine years after the event occurred. However, this effect is dependent on the value an individual places on work: the greater the attachment to employment the stronger the negative effect of displacement. A range of mediators, such as physical health, mental well-being, and personal efficacy, do not appear to account for the effect. Copyright © 2014 Elsevier Inc. All rights reserved.

[Vitamin and mineral supplements in the diet of military personnel: effect on the balance of iron, copper and manganese, immune reactivity and physical work-capacity].

PubMed

Zaĭtseva, I P; Nosolodin, V V; Zaĭtsev, O N; Gladkikh, I P; Koznienko, I V; Beliakov, R A; Arshinov, N P

2012-03-01

Conducted with the participation of 50 students of military educational study the effect of various vitamin and mineral complexes for the provision by the body naturally iron, copper and manganese on the immune and physical status. Found that diets enriched BMV was accompanied by a significant delay in the micro-elements, mainly iron, which indicates a deficiency of these bioelements in chickens Santo during the summer. Under the influence of vitamin-mineral complexes significantly increased rates of natural and specific immunity. As the delay increases significantly increased iron medical indicators of immunological reaction efficiency and physical performance.

Evolution of a Heavy Metal Homeostasis/Resistance Island Reflects Increasing Copper Stress in Enterobacteria

PubMed Central

Staehlin, Benjamin M.; Gibbons, John G.; Rokas, Antonis; O’Halloran, Thomas V.; Slot, Jason C.

2016-01-01

Copper homeostasis in bacteria is challenged by periodic elevation of copper levels in the environment, arising from both natural sources and human inputs. Several mechanisms have evolved to efflux copper from bacterial cells, including the cus (copper sensing copper efflux system), and pco (plasmid-borne copper resistance system) systems. The genes belonging to these two systems can be physically clustered in a Copper Homeostasis and Silver Resistance Island (CHASRI) on both plasmids and chromosomes in Enterobacteria. Increasing use of copper in agricultural and industrial applications raises questions about the role of human activity in the evolution of novel copper resistance mechanisms. Here we present evidence that CHASRI emerged and diversified in response to copper deposition across aerobic and anaerobic environments. An analysis of diversification rates and a molecular clock model suggest that CHASRI experienced repeated episodes of elevated diversification that could correspond to peaks in human copper production. Phylogenetic analyses suggest that CHASRI originated in a relative of Enterobacter cloacae as the ultimate product of sequential assembly of several pre-existing two-gene modules. Once assembled, CHASRI dispersed via horizontal gene transfer within Enterobacteriaceae and also to certain members of Shewanellaceae, where the original pco module was replaced by a divergent pco homolog. Analyses of copper stress mitigation suggest that CHASRI confers increased resistance aerobically, anaerobically, and during shifts between aerobic and anaerobic environments, which could explain its persistence in facultative anaerobes and emergent enteric pathogens. PMID:26893455

Optics vs copper: from the perspective of "Thunderbolt" interconnect technology

NASA Astrophysics Data System (ADS)

Cheng, Hengju; Krause, Christine; Ko, Jamyuen; Gao, Miaobin; Liu, Guobin; Wu, Huichin; Qi, Mike; Lam, Chun-Chit

2013-02-01

Interconnect technology has been progressed at a very fast pace for the past decade. The signaling rates have steadily increased from 100:Mb/s to 25Gb/s. In every generation of interconnect technology evolution, optics always seems to take over at first, however, at the end, the cost advantage of copper wins over. Because of this, optical interconnects are limited to longer distance links where the attenuation in copper cable is too large for the integrated circuits to compensate. Optical interconnect has long been viewed as the premier solution in compared with copper interconnect. With the release of Thunderbolt technology, we are entering a new era in consumer electronics that runs at 10Gb/s line rate (20Gb/s throughput per connector interface). Thunderbolt interconnect technology includes both active copper cables and active optical cables as the transmission media which have very different physical characteristics. In order for optics to succeed in consumer electronics, several technology hurdles need to be cleared. For example, the optical cable needs to handle the consumer abuses such as pinch and bend. Also, the optical engine used in the active optical cable needs to be physically very small so that we don't change the looks and feels of the cable/connector. Most importantly, the cost of optics needs to come down significantly to effectively compete with the copper solution. Two interconnect technologies are compared and discussed on the relative cost, power consumption, form factor, density, and future scalability.

Copper Ion Beam Irradiation-Induced Effects on Structural, Morphological and Optical Properties of Tin Dioxide Nanowires

NASA Astrophysics Data System (ADS)

A. Khan, M.; Qayyum, A.; I., Ahmed; T., Iqbal; A. Khan, A.; Waleed, R.; Mohuddin, B.; Malik, M.

2016-07-01

Not Available Supported by the Department of Physics, the University of AJK, High Tech. Centralized Instrumentation Lab, the University of AJK, Pakistan and the Experimental Physics Division, and the National Center for Physics, Islamabad Pakistan.

"It's All about Developing the Whole Child": An Examination of the "Legacy" Benefits of Youth Sport Trust's School-Based Inclusion Initiatives

ERIC Educational Resources Information Center

Black, Alison; Costello, Rebecca; Craft, Anna; Katene, Will

2015-01-01

Between 2011 and 2013, the Department for Education (DfE) in England made £3.3 million available to support the development of opportunities for young disabled people to access high-quality physical education and school sport. The DfE with the Youth Sport Trust (YST) developed a range of initiatives to help meet this aim, including Project…

The Roles of Intuition and Informants' Expertise in Children's Epistemic Trust.

PubMed

Lane, Jonathan D; Harris, Paul L

2015-01-01

This study examined how children's intuitions and informants' expertise influence children's trust in informants' claims. Three- to 8-year-olds (N = 192) watched videos in which experts (animal/biology experts or artifact/physics experts) made either intuitively plausible or counterintuitive claims about obscure animals or artifacts. Claims fell either within or beyond experts' domains of expertise. Children of all ages were more trusting of claims made by informants with relevant, as opposed to irrelevant, expertise. Children also showed greater acceptance of intuitive rather than counterintuitive claims, a differentiation that increased with age as they developed firmer intuitions about what can ordinarily happen. In summary, children's trust in testimony depends on whether informants have the relevant expertise as well as on children's own developing intuitions. © 2014 The Authors. Child Development © 2014 Society for Research in Child Development, Inc.

Diffusion-based recommendation with trust relations on tripartite graphs

NASA Astrophysics Data System (ADS)

Wang, Ximeng; Liu, Yun; Zhang, Guangquan; Xiong, Fei; Lu, Jie

2017-08-01

The diffusion-based recommendation approach is a vital branch in recommender systems, which successfully applies physical dynamics to make recommendations for users on bipartite or tripartite graphs. Trust links indicate users’ social relations and can provide the benefit of reducing data sparsity. However, traditional diffusion-based algorithms only consider rating links when making recommendations. In this paper, the complementarity of users’ implicit and explicit trust is exploited, and a novel resource-allocation strategy is proposed, which integrates these two kinds of trust relations on tripartite graphs. Through empirical studies on three benchmark datasets, our proposed method obtains better performance than most of the benchmark algorithms in terms of accuracy, diversity and novelty. According to the experimental results, our method is an effective and reasonable way to integrate additional features into the diffusion-based recommendation approach.

Health, work, social trust, and financial situation in persons with Usher syndrome type 1.

PubMed

Ehn, Mattias; Wahlqvist, Moa; Danermark, Berth; Dahlström, Örjan; Möller, Claes

2018-05-28

Research has demonstrated that persons with Usher syndrome type 1 (USH1) have significantly poorer physical and psychological health compared to a reference group. To explore the relation between work, health, social trust, and financial situation in USH1 compared to a reference group. Sixty-six persons (18-65 y) from the Swedish Usher database received a questionnaire and 47 were included, 23 working and 24 non-working. The reference group comprised 3,049 working and 198 non-working persons. The Swedish Health on Equal Terms questionnaire was used and statistical analysis with multiple logistic regression was conducted. The USH1 non-work group had a higher Odds ratio (95% CI) in poor psychological and physical health, social trust, and financial situation compared to the USH1 work group and reference groups. Age, gender, hearing, and vision impairment did not explain the differences. The relation between the USH1 work and non-work groups showed the same pattern as the reference groups, but the magnitude of problems was significantly higher. Both disability and unemployment increased the risk of poor health, social trust and financial situation in persons with USH1, but having an employment seemed to counteract the risks related to disability.

News

NASA Astrophysics Data System (ADS)

2002-05-01

Physics on Stage: Physics on the political stage Women in Physics: Allez les girls! Curriculum: Students want ethics debate in school science Physics on Stage: Buzzing around the tulips Events: GIREP 2002 Competition: Schumacher in the shower! Higher Education: Universities consider conceptual physics courses Resources: Evaluation of Advancing Physics Research Frontiers: Physics Teachers @ CERN 2002 UK Curriculum: Preparing useful citizens China: Changing the approach NSTA Annual Convention: Innovations and simplicity Europe: European Community Science and Society Action Plan Citizenship: ASE-Wellcome Trust citizenship education initiative

Copper-free route to triazole-modified peptidomimetic by the combination of two multicomponent reactions in one pot.

PubMed

Niu, Teng-fei; Gu, Lin; Yi, Wen-bin; Cai, Chun

2012-05-14

An efficient copper-free protocol for the synthesis of 5-methyl-1H-1,2,3-triazole-modified peptidomimetics through the combination of Ugi four-component reaction with a three-component cycloaddition, has been developed. The copper-free straightforward process is suitable for drug discovery. The chemoselective preparation of 1,4-disubstituted, triazole-modified peptidomimetics by using alkynyl substituted amines may have potential biological and synthetic application. At last, a "Lapinski type" analysis of the physical properties was performed, which is expected to help drug discovery.

Characterizing copper flows in international trade of China, 1975-2015.

PubMed

Zhang, Ling; Chen, Tianming; Yang, Jiameng; Cai, Zhijian; Sheng, Hu; Yuan, Zengwei; Wu, Huijun

2017-12-01

Since the economic reform, China has actively participated in the global market with rapid industrialization and gradually dominated the utilization and consumption of some critical materials, one of which is copper. China has reigned the global anthropogenic cycle of copper since 2004. We explore copper flows along with the international trade of China during 1975-2015, through life cycle lens, from ore to final products. Our main finding is that China has become more active in the copper-related trade, indicated by its great increase in trade volume and the number of trade partners. The physical volume of copper flows through trade increased over 119 times between 1975 and 2015, mainly because of more imported raw materials of copper and exported copper products. Generally, China is a net importer of copper, with increasing import dependence through the study period, whereas the degree of dependence slightly decreased from 2010 to 2015. The indicator of Export Support Rate took a decreasing percentage, which has fallen about 35% since 2010. It suggests China's changing position in the global resource and manufacturing market. In terms of trade price of different copper products, the price of imported copper concentrate was noticeably higher than that of exported one, revealing the poor copper resource endowment of China; while the different trend of copper semis in recent years signifies that China is in urgent need to improve its capability of producing high value-added semis. From international trade perspective, the copper resource of China presented stable supply as well as demand. The One Belt One Road strategy proposed by the state will further expand both the resource and market of copper. Copyright © 2017 Elsevier B.V. All rights reserved.

Copper-Zinc Superoxide Dismutase: A Unique Biological "Ligand" for Bioinorganic Studies.

ERIC Educational Resources Information Center

Valentine, Joan Selverstone; de Freitas, Duarte Mota

1985-01-01

Discusses superoxide dismutase (SOD) research and the properties of copper, zinc (Cu, Zn)-SOD. Emphasizes the controversy concerning the role of Cu,Zn-SOD and other SOD enzymes as protective agents in reactions involving dioxygen metabolism, and the properties of Cu, Zn-SOD that make it an interesting biological ligand for physical studies of…

Photochemical Copper Coating on 3D Printed Thermoplastics

NASA Astrophysics Data System (ADS)

Yung, Winco K. C.; Sun, Bo; Huang, Junfeng; Jin, Yingdi; Meng, Zhengong; Choy, Hang Shan; Cai, Zhixiang; Li, Guijun; Ho, Cheuk Lam; Yang, Jinlong; Wong, Wai Yeung

2016-08-01

3D printing using thermoplastics has become very popular in recent years, however, it is challenging to provide a metal coating on 3D objects without using specialized and expensive tools. Herein, a novel acrylic paint containing malachite for coating on 3D printed objects is introduced, which can be transformed to copper via one-step laser treatment. The malachite containing pigment can be used as a commercial acrylic paint, which can be brushed onto 3D printed objects. The material properties and photochemical transformation processes have been comprehensively studied. The underlying physics of the photochemical synthesis of copper was characterized using density functional theory calculations. After laser treatment, the surface coating of the 3D printed objects was transformed to copper, which was experimentally characterized by XRD. 3D printed prototypes, including model of the Statue of Liberty covered with a copper surface coating and a robotic hand with copper interconnections, are demonstrated using this painting method. This composite material can provide a novel solution for coating metals on 3D printed objects. The photochemical reduction analysis indicates that the copper rust in malachite form can be remotely and photo-chemically reduced to pure copper with sufficient photon energy.

Photochemical Copper Coating on 3D Printed Thermoplastics

PubMed Central

Yung, Winco K. C.; Sun, Bo; Huang, Junfeng; Jin, Yingdi; Meng, Zhengong; Choy, Hang Shan; Cai, Zhixiang; Li, Guijun; Ho, Cheuk Lam; Yang, Jinlong; Wong, Wai Yeung

2016-01-01

3D printing using thermoplastics has become very popular in recent years, however, it is challenging to provide a metal coating on 3D objects without using specialized and expensive tools. Herein, a novel acrylic paint containing malachite for coating on 3D printed objects is introduced, which can be transformed to copper via one-step laser treatment. The malachite containing pigment can be used as a commercial acrylic paint, which can be brushed onto 3D printed objects. The material properties and photochemical transformation processes have been comprehensively studied. The underlying physics of the photochemical synthesis of copper was characterized using density functional theory calculations. After laser treatment, the surface coating of the 3D printed objects was transformed to copper, which was experimentally characterized by XRD. 3D printed prototypes, including model of the Statue of Liberty covered with a copper surface coating and a robotic hand with copper interconnections, are demonstrated using this painting method. This composite material can provide a novel solution for coating metals on 3D printed objects. The photochemical reduction analysis indicates that the copper rust in malachite form can be remotely and photo-chemically reduced to pure copper with sufficient photon energy. PMID:27501761

Photochemical Copper Coating on 3D Printed Thermoplastics.

PubMed

Yung, Winco K C; Sun, Bo; Huang, Junfeng; Jin, Yingdi; Meng, Zhengong; Choy, Hang Shan; Cai, Zhixiang; Li, Guijun; Ho, Cheuk Lam; Yang, Jinlong; Wong, Wai Yeung

2016-08-09

3D printing using thermoplastics has become very popular in recent years, however, it is challenging to provide a metal coating on 3D objects without using specialized and expensive tools. Herein, a novel acrylic paint containing malachite for coating on 3D printed objects is introduced, which can be transformed to copper via one-step laser treatment. The malachite containing pigment can be used as a commercial acrylic paint, which can be brushed onto 3D printed objects. The material properties and photochemical transformation processes have been comprehensively studied. The underlying physics of the photochemical synthesis of copper was characterized using density functional theory calculations. After laser treatment, the surface coating of the 3D printed objects was transformed to copper, which was experimentally characterized by XRD. 3D printed prototypes, including model of the Statue of Liberty covered with a copper surface coating and a robotic hand with copper interconnections, are demonstrated using this painting method. This composite material can provide a novel solution for coating metals on 3D printed objects. The photochemical reduction analysis indicates that the copper rust in malachite form can be remotely and photo-chemically reduced to pure copper with sufficient photon energy.

The importance of surface functional groups in the adsorption of copper onto walnut shell derived activated carbon.

PubMed

Xie, Ruzhen; Jin, Yan; Chen, Yao; Jiang, Wenju

2017-12-01

In this study, activated carbon (AC) was prepared from walnut shell using chemical activation. The surface chemistry of the prepared AC was modified by introducing or blocking certain functional groups, and the role of the different functional groups involved in the copper uptake was investigated. The structural and chemical heterogeneity of the produced carbons are characterized by Fourier transform infrared spectrometry, X-ray photoelectron spectroscopy, Boehm titration method and N 2 /77 K adsorption isotherm analysis. The equilibrium and the kinetics of copper adsorption onto AC were studied. The results demonstrated that the functional groups on AC played an important role in copper uptake. Among various surface functional groups, the oxygen-containing group was found to play a critical role in the copper uptake, and oxidation is the most effective way to improve Cu (II) adsorption onto AC. Ion-exchange was identified to be the dominant mechanism in the copper uptake by AC. Some other types of interactions, like complexation, were also proven to be involved in the adsorption process, while physical force was found to play a small role in the copper uptake. The regeneration of copper-loaded AC and the recovery of copper were also studied to evaluate the reusability of the oxidized AC.

Migration of copper from nanocopper/LDPE composite films.

PubMed

Liu, Fang; Hu, Chang-Ying; Zhao, Quan; Shi, Yu-Jie; Zhong, Huai-Ning

2016-11-01

Three nanocopper/low-density polyethylene (LDPE) composite films were tested in food simulants (3% acetic acid and 10% ethanol) and real food matrices (rice vinegar, bottled water and Chinese liquor) to explore the behaviours of copper migration using ICP-OES and GFAAS. The effects of exposure time, temperature, nanocopper concentration and contact media on the release of copper from nanocopper/LDPE composite films were studied. It was shown that the migration of copper into 10% ethanol was much less than that into 3% acetic acid at the same conditions. With the increase of nanocopper concentration, exposure time and temperature, the release of copper increased. Copper migration does not appear to be significant in the case of bottled water and Chinese liquor compared with rice vinegar with a maximum value of 0.54 μg mL -1 for the CF-0.25# bags at 70°C for 2 h. The presence and morphology of copper nanoparticles in the films and the topographical changes of the films were confirmed by field emission scanning electron microscope (FE-SEM) and atomic force microscope (AFM). In this manner, copper nanoparticles of different morphologies, sizes and distribution were found, and samples with higher nanocopper concentration had a more irregular topography. In the case of Fourier transform infrared spectroscopy (FTIR), no chemical bonds formed between copper nanoparticles and LDPE. Copper nanoparticles were just as physically dispersed in LDPE.

Nano Copper Induces Apoptosis in PK-15 Cells via a Mitochondria-Mediated Pathway.

PubMed

Zhang, Hui; Chang, Zhenyu; Mehmood, Khalid; Abbas, Rao Zahid; Nabi, Fazul; Rehman, Mujeeb Ur; Wu, Xiaoxing; Tian, Xinxin; Yuan, Xiaodan; Li, Zhaoyang; Zhou, Donghai

2018-01-01

Nano-sized copper particles are widely used in various chemical, physical, and biological fields. However, earlier studies have shown that nano copper particles (40-100 μg/mL) can induce cell toxicity and apoptosis. Therefore, this study was conducted to investigate the role of nano copper in mitochondrion-mediated apoptosis in PK-15 cells. The cells were treated with different doses of nano copper (20, 40, 60, and 80 μg/mL) to determine the effects of apoptosis using acridine orange/ethidium bromide (AO/EB) fluorescence staining and a flow cytometry assay. The levels of malondialdehyde (MDA) and superoxide dismutase (SOD) in the PK-15 cells were examined using commercially available kits. Moreover, the mRNA levels of the Bax, Bid, Caspase-3, and CYCS genes were assessed by real-time PCR. The results revealed that nano copper exposure induced apoptosis and changed the mitochondrial membrane potential. In addition, nano copper significantly altered the levels of the Bax, Bid, Caspase-3, and CYCS genes at a concentration of 40 μg/mL. To summarize, nano copper significantly (P < 0.05) decreased the level of SOD and increased the level of MDA in PK-15 cells. Altogether, these results suggest that nano copper can play an important role in inducing the apoptotic pathway in PK-15 cells, which may be the mechanism by which nano copper induces nephrotoxicity.

Trust, Satisfaction, and Confidence in Health Care Providers Among Student and Professional Dancers in France.

PubMed

Alimena, Stephanie; Air, Mary E

2016-09-01

Patients who trust their physicians are more likely to communicate about medical problems, adhere to medical advice, and be satisfied with care. Dancers have demonstrated low utilization of physician services for both preventive care and dance injuries. The purpose of this cross-sectional study was to examine trust in physicians as a variable influencing dancers' health care-seeking behavior. The validated Trust in Physician Scale was administered to 45 professional and 34 student ballet/contemporary dancers in France (36.7% male, 63.3% female) to evaluate their trust in medical doctors (MDs) vs physical therapists (PTs). Dancers were also asked about satisfaction and confidence in medical treatment for dance injuries. Dancers indicated greater trust in PTs than MDs (70.61±10.57 vs 65.38±10.79, t=-3.499, p=0.001). Students exhibited significantly less trust in MDs than professional dancers (62.04±9.96 vs 67.65±10.42, t=-2.381, p=0.020). Trust scale scores for PTs did not differ between students and professionals (69.53±8.30 vs 71.68±12.09, t=-0.866, p=0.389). Students were less confident than professional dancers in their physician's ability to treat their most severe injury (6.7% of students vs 35.7% of professionals "very confident, " X2=9.402, p=0.052). Dancer patients exhibit lower trust in physicians compared to previously studied non-dancer populations. Our results suggest that reduced trust in physicians and factors related to professional status may influence dancers' health care-seeking behavior. Student dancers may comprise a unique subpopulation of dancers with distinctive health care needs.

Using Reputation Based Trust to Overcome Malfunctions and Malicious Failures in Electric Power Protection Systems

DTIC Science & Technology

2011-09-01

concert with a physical attack. Additionally, the importance of preventive measures implemented by a social human network to counteract a cyber attack...integrity of the data stored on specific computers. This coordinated cyber attack would have been successful if not for the trusted social network...established by Mr. Hillar Aarelaid, head of the Estonian computer 6 emergency response team (CERT). This social network consisted of Mr. Hillar Aarelaid

Technical Qualifications for Treating Photovoltaic Assets as Real Property by Real Estate Investment Trusts (REITs)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Feldman, D.; Mendelsohn, M.; Coughlin, J.

2012-06-01

It has been proposed that Real Estate Investment Trusts (REITs) have the potential to lower the cost and increase the adoption of photovoltaic systems (PV) by offering a more attractive source of capital. The purpose of this paper is to explain the fundamental physical characteristics of PV and compare them to the characteristics of 'real' property, to help determine whether REITs can own PV systems.

An Improved Quantum Proxy Blind Signature Scheme Based on Genuine Seven-Qubit Entangled State

NASA Astrophysics Data System (ADS)

Yang, Yuan-Yuan; Xie, Shu-Cui; Zhang, Jian-Zhong

2017-07-01

An improved quantum proxy blind signature scheme based on controlled teleportation is proposed in this paper. Genuine seven-qubit entangled state functions as quantum channel. We use the physical characteristics of quantum mechanics to implement delegation, signature and verification. Security analysis shows that our scheme is unforgeability, undeniability, blind and unconditionally secure. Meanwhile, we propose a trust party to provide higher security, the trust party is costless.

A sediment quality triad assessment of the impact of copper mine tailings disposal on the littoral sedimentary environment in the Atacama region of northern Chile.

PubMed

Lee, Matthew R; Correa, Juan A; Seed, Ray

2006-11-01

A sediment quality triad (SQT) assessment was made of the impact of copper mine tailings disposal on littoral meiofaunal assemblages in the Atacama region of northern Chile. This situation is unusual in that the disposal is direct into the high-energy coastal system and not via a river estuary or other low-energy environment. This situation also allows for the examination of the impact of copper mine tailings in the absence of confounding effects from other pollutants. The three components of the SQT were: 1. an analysis of the bioavailable metals in both the sedimentary porewater and the adjacent seawater, 2. a microcosm bioassay of both sediments and seawaters using meiofaunal assemblages, and 3. quantitative field samples of the meiofaunal assemblages. Twelve study sites with varying degrees of impact were used, including three reference sites. The study identified that both the meiofaunal assemblage densities and taxa diversities decrease with increasing levels of bioavailable copper, that the Foraminifera and Harpacticoida are sensitive to copper, and that otoplanid Turbellaria are often characteristic of impacted sites; tailings also have both chemical and physical impacts on the environment. In some cases the physical impact of tailings is more important in excluding some organisms e.g. the interstitial polychaete, Saccocirrus sonomacus, from a site than is their chemical impact.

A Theoretical Analysis: Physical Unclonable Functions and The Software Protection Problem

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nithyanand, Rishab; Solis, John H.

2011-09-01

Physical Unclonable Functions (PUFs) or Physical One Way Functions (P-OWFs) are physical systems whose responses to input stimuli (i.e., challenges) are easy to measure (within reasonable error bounds) but hard to clone. This property of unclonability is due to the accepted hardness of replicating the multitude of uncontrollable manufacturing characteristics and makes PUFs useful in solving problems such as device authentication, software protection, licensing, and certified execution. In this paper, we focus on the effectiveness of PUFs for software protection and show that traditional non-computational (black-box) PUFs cannot solve the problem against real world adversaries in offline settings. Our contributionsmore » are the following: We provide two real world adversary models (weak and strong variants) and present definitions for security against the adversaries. We continue by proposing schemes secure against the weak adversary and show that no scheme is secure against a strong adversary without the use of trusted hardware. Finally, we present a protection scheme secure against strong adversaries based on trusted hardware.« less

The effect of natural and anthropogenic factors on sorption of copper in chernozem

NASA Astrophysics Data System (ADS)

Bauer, Tatiana; Minkina, Tatiana; Mandzhieva, Saglara; Pinskii, David; Linnik, Vitaly; Sushkova, Svetlana

2016-04-01

The aim of this work was to study the effect of the attendant anions and particle-size distribution on the adsorption of copper by ordinary chernozem. Solutions of HM nitrates, acetates, chlorides, and sulfates were used to study the effect of the chemical composition of added copper salts on the adsorption of copper by an ordinary chernozem. Samples of the soil sieved through a 1-mm sieve in the natural ionic form and soil fraction with different particle size (clay - the particle with size < 1μm and physical clay < 10 μm) were treated with solutions of the corresponding copper salts at a soil : solution ratio of 1:10. The concentrations of the initial copper solutions were 0.02, 0.05, 0.08, 0.1, 0.3, 0.5, and 1.0 mM/L. The range of Cu2+ concentrations in the studied system covers different geochemical situations corresponding to the actual levels of soil contamination with the metal under study. The suspensions were shaken for 1 h, left to stand for 24 h, and then filtered. The contents of the HM in the filtrates were determined by atomic absorption spectrometry (AAS). The contents of the adsorbed copper cations were calculated from the difference between the metal concentrations in the initial and equilibrium solutions. The isotherms of copper adsorption from the metal nitrate, chloride, and sulfate solutions have near linear shapes and, hence, can be satisfactorily described by a Henry or Freundlich equation: Cads = KH •Ceq.(1) Cads = KF •Ceqn,(2) where Cadsis the content of the adsorbed cations, mM/kg soil;Ceq is the concentration of copper in the equilibrium solution, mM/L; KH and KF denote the Henry and Freundlich adsorption coefficients, respectively, kg/L. The isotherm of Cu2+ adsorption by ordinary chernozem from acetate solutions is described by the Langmuir equation: Cads = C∞ÊLC / (1 + ÊLC), (3) where Cadsis the content of the adsorbed cations, mM/kg soil;C∞ is the maximum adsorption of the HM, mM/kg soil; ÊL is the affinity constant, L/mM; C is the concentration of the HM in the equilibrium solution, mM/L. According to the values of KH, the binding strength of the copper cations adsorbed from different salt solutions decreases in the series: Cu(Ac)2(1880,5± 76,2) > CuCl2(1442,8±113,5) > Cu(NO3)2(911,4 ± 31,1) >> CuSO4(165,3 ± 12,9). Thus, copper is most strongly adsorbed from the acetate solution and least strongly from the sulfate solution. The adsorption of copper by clay and physical clay fractions from the ordinary chernozem was of limited character and followed the (3) equation. In the particle-size fractions separated from the soils, the concentrations of copper decreased with the decreasing particle size. The values of ÊL and C∞characterizing the HM adsorption by the chernozem and its particle-size fractions formed the following sequence: clay (80,20±20,29 and 28,45±0,46 > physical clay (58,20±14,54 and 22,15±1,22) > entire soil (38,80±12,33 and 17,58±3,038). This work was supported by the Russian Ministry of Education and Science, project no. 5.885.2014/K, Russian Foundation for Basic Research, projects no. 14-05-00586 À

Experimental and Theoretical Investigation of Thiazolyl Blue as a Corrosion Inhibitor for Copper in Neutral Sodium Chloride Solution.

PubMed

Feng, Li; Zhang, Shengtao; Qiang, Yujie; Xu, Yue; Guo, Lei; Madkour, Loutfy H; Chen, Shijin

2018-06-19

The anticorrosion effect of thiazolyl blue (MTT) for copper in 3% NaCl at 298 K was researched by electrochemical methods, scanning electron-microscopy (SEM), and atomic force microscopy (AFM). The results reveal that MTT can protect copper efficiently, with a maximum efficiency of 95.7%. The corrosion inhibition mechanism was investigated by X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectral (FT-IR), and theoretical calculation. The results suggest that the MTT molecules are adsorbed on metal surface forming a hydrophobic protective film to prevent copper corrosion. It also indicates that the MTT and copper form covalent bonds. The molecular dynamic simulation further gives the evidence for adsorption. The adsorption isotherm studies demonstrate that a spontaneous, mixed physical and chemical adsorption occurs, which obeys Langmuir adsorption isotherm. The present research can help us better understand the corrosion inhibition process and improve it.

Where does the neighborhood go? Trust, social engagement, and health among older adults in Baltimore City.

PubMed

Garoon, Joshua; Engelman, Michal; Gitlin, Laura; Szanton, Sarah

2016-09-01

Trust is often cited as a necessary predecessor of social engagement, and a public-health good. We question those suppositions through analysis of the life histories of lower-income older adults aging in place in Baltimore. These people desired to continue living independently, but also expressed a complex mix of trust and mistrust in their neighbors, neighborhoods, and broader environments. This was the product of interrelated processes of multilevel physical and social changes over time and space - and, we argue, often featured a "healthy mistrust" that pushed participants to pursue personally meaningful forms of social engagement, whether new or continued. Copyright © 2016 Elsevier Ltd. All rights reserved.

[Study on physical properties of titanium alloy sample fabricated with vacuum-sintered powder metallurgy].

PubMed

Ding, X; Liang, X; Chao, Y; Han, X

2000-06-01

To investigate the physical properties of titanium alloy fabricated with vacuum-sintered powder metallurgy. The titanium powders of three different particle sizes(-160mesh, -200 - +300mesh, -300mesh) were selected, and mixed with copper and aluminum powder in different proportions. Two other groups were made up of titanium powder(-200 - +300mesh) plated with copper and tin. The build-up and, condensation method and a double-direction press with a metal mold were used. The green compacts were sintered at 1000 degrees C for 15 minutes in a vacuum furnace at 0.025 Pa. In the double-direction press, the specimens were compacted at the pressure of 100 MPa, 200 MPa and 300 MPa respectively. Then the linear shrinkage ratio and the opening porosity of the sintered compacts were evaluated respectively. 1. The linear shrinkage ratio of specimens decreased with the increased compacted pressure(P < 0.05). There was no significant difference among the linear shrinkage ratios of three different titanium powders at the same compacted pressure(P > 0.05), but that of titanium powder plated with copper and tin was higher than those of other specimens without plating(P < 0.05). 2. The opening porosity of specimens decreased with the increased compacted pressure(P < 0.05). Three different sized particle of titanium powder did not affect the opening porosity at the same compacted pressure(P > 0.05). The composition of titanium-based metal powder mixtures and the compacted pressures affect the physical properties of sintered compacts. Titanium powder plated with copper and tin is compacted and sintered easily, and the physical properties of sintered compacts are greatly improved.

An Illumination- and Temperature-Dependent Analytical Model for Copper Indium Gallium Diselenide (CIGS) Solar Cells

DOE PAGES

Sun, Xingshu; Silverman, Timothy; Garris, Rebekah; ...

2016-07-18

In this study, we present a physics-based analytical model for copper indium gallium diselenide (CIGS) solar cells that describes the illumination- and temperature-dependent current-voltage (I-V) characteristics and accounts for the statistical shunt variation of each cell. The model is derived by solving the drift-diffusion transport equation so that its parameters are physical and, therefore, can be obtained from independent characterization experiments. The model is validated against CIGS I-V characteristics as a function of temperature and illumination intensity. This physics-based model can be integrated into a large-scale simulation framework to optimize the performance of solar modules, as well as predict themore » long-term output yields of photovoltaic farms under different environmental conditions.« less

ARINC 818 express for high-speed avionics video and power over coax

NASA Astrophysics Data System (ADS)

Keller, Tim; Alexander, Jon

2012-06-01

CoaXPress is a new standard for high-speed video over coax cabling developed for the machine vision industry. CoaXPress includes both a physical layer and a video protocol. The physical layer has desirable features for aerospace and defense applications: it allows 3Gbps (up to 6Gbps) communication, includes 21Mbps return path allowing for bidirectional communication, and provides up to 13W of power, all over a single coax connection. ARINC 818, titled "Avionics Digital Video Bus" is a protocol standard developed specifically for high speed, mission critical aerospace video systems. ARINC 818 is being widely adopted for new military and commercial display and sensor applications. The ARINC 818 protocol combined with the CoaXPress physical layer provide desirable characteristics for many aerospace systems. This paper presents the results of a technology demonstration program to marry the physical layer from CoaXPress with the ARINC 818 protocol. ARINC 818 is a protocol, not a physical layer. Typically, ARINC 818 is implemented over fiber or copper for speeds of 1 to 2Gbps, but beyond 2Gbps, it has been implemented exclusively over fiber optic links. In many rugged applications, a copper interface is still desired, by implementing ARINC 818 over the CoaXPress physical layer, it provides a path to 3 and 6 Gbps copper interfaces for ARINC 818. Results of the successful technology demonstration dubbed ARINC 818 Express are presented showing 3Gbps communication while powering a remote module over a single coax cable. The paper concludes with suggested next steps for bring this technology to production readiness.

A natural macroalgae consortium for biosorption of copper from aqueous solution: Optimization, modeling and design studies.

PubMed

Deniz, Fatih; Ersanli, Elif Tezel

2018-03-21

In this study, the capacity of a natural macroalgae consortium consisting of Chaetomorpha sp., Polysiphonia sp., Ulva sp. and Cystoseira sp. species for the removal of copper ions from aqueous environment was investigated at different operating conditions, such as solution pH, copper ion concentration and contact time. These environmental parameters affecting the biosorption process were optimized on the basis of batch experiments. The experimentally obtained data for the biosorption of copper ions onto the macroalgae-based biosorbent were modeled using the isotherm models of Freundlich, Langmuir, Sips and Dubinin-Radushkevich and the kinetic models of pseudo-first-order, pseudo-second-order, Elovich and Weber and Morris. The pseudo-first-order and Sips equations were the most suitable models to describe the copper biosorption from aqueous solution. The thermodynamic data revealed the feasibility, spontaneity and physical nature of biosorption process. Based on the data of Sips isotherm model, the biosorption capacity of biosorbent for copper ions was calculated as 105.370 mg g -1 under the optimum operating conditions. A single-stage batch biosorption system was developed to predict the real-scale-based copper removal performance of biosorbent. The results of this investigation showed the potential utility of macroalgae consortium for the biosorption of copper ions from aqueous medium.

Equity and Inclusion in Physical Education PLC

ERIC Educational Resources Information Center

Evans, John

2014-01-01

Physical Educationalists in many western and westernised societies across the globe are facing new challenges as system wide changes take place increasing the role of private bodies (e.g. Academy trusts) in the delivery of school based education. This reflective and rather personal paper considers the place and meaning of "inclusion" and…

TOP Outdoors: Outdoor and Adventurous Activities for Every Teacher and Child.

ERIC Educational Resources Information Center

Haskins, David; Perry, Frank

1999-01-01

The Youth Sport Trust developed a package of activities to support the teaching of outdoor and adventurous activities, integrated into the British national curriculum through physical education programs for preschool through secondary school age. Activity categories are physical challenges, trails, and orienteering. Teaching resources and their…

Factors influencing trust in doctors: a community segmentation strategy for quality improvement in healthcare

PubMed Central

Gopichandran, Vijayaprasad; Chetlapalli, Satish Kumar

2013-01-01

Background Trust is a forward-looking covenant between the patient and the doctor where the patient optimistically accepts his/her vulnerability. Trust is known to improve the clinical outcomes. Objectives To explore the factors that determine patients’ trust in doctors and to segment the community based on factors which drive their trust. Setting Resource-poor urban and rural settings in Tamil Nadu, a state in southern India. Participants A questionnaire was administered to a sample of 625 adult community-dwelling respondents from four districts of Tamil Nadu, India, chosen by multistage sampling strategy. Outcome measures The outcomes were to understand the main domains of factors influencing trust in doctors and to segment the community based on which of these domains predominantly influenced their trust. Results Factor analysis revealed five main categories, namely, comfort with the doctor, doctor with personal involvement with the patient, behaviourally competent doctor, doctor with a simple appearance and culturally competent doctor, which explained 49.3% of the total variance. Using k-means cluster analysis the respondents were segmented into four groups, namely, those who have ‘comfort-based trust’, ‘emotionally assessed trust’, who were predominantly older and belonging to lower socioeconomic status, those who had ‘personal trust’, who were younger people from higher socioeconomic strata of the community and the group who had ‘objectively assessed trust’, who were younger women. Conclusions Trust in doctors seems to be influenced by the doctor's behaviuor, perceived comfort levels, personal involvement with the patient, and to a lesser extent by cultural competence and doctor's physical appearance. On the basis of these dimensions, the community can be segmented into distinct groups, and trust building can happen in a strategic manner which may lead to improvement in perceived quality of care. PMID:24302512

Fabricating and strengthening the carbon nanotube/copper composite fibers with high strength and high electrical conductivity

NASA Astrophysics Data System (ADS)

Han, Baoshuai; Guo, Enyu; Xue, Xiang; Zhao, Zhiyong; Li, Tiejun; Xu, Yanjin; Luo, Liangshun; Hou, Hongliang

2018-05-01

Combining the excellent properties of carbon nanotube (CNT) and copper, CNT/Cu composite fibers were fabricated by physical vapor deposition (PVD) and rolling treatment. Dense and continuous copper film (∼2 μm) was coated on the surface of the CNT fibers by PVD, and rolling treatment was adopt to strengthen the CNT/Cu composite fibers. After the rolling treatment, the defects between the Cu grains and the CNT bundles were eliminated, and the structure of both the copper film and the core CNT fibers were optimized. The rolled CNT/Cu composite fibers possess high tensile effective strength (1.01 ± 0.13 GPa) and high electrical conductivity ((2.6 ± 0.3) × 107 S/m), and thus, this material may become a promising wire material.

A dance intervention for cancer survivors and their partners (RHYTHM).

PubMed

Pisu, Maria; Demark-Wahnefried, Wendy; Kenzik, Kelly M; Oster, Robert A; Lin, Chee Paul; Manne, Sharon; Alvarez, Ronald; Martin, Michelle Y

2017-06-01

The purpose of this study was to assess the feasibility, acceptability, and impact of a ballroom dance intervention on improving quality of life (QOL) and relationship outcomes in cancer survivors and their partners. We conducted a pilot randomized controlled trial with two arms (Restoring Health in You (and Your Partner) through Movement, RHYTHM): (1) immediate dance intervention and (2) delayed intervention (wait-list control). The intervention consisted of 10 private weekly dance lessons and 2 practice parties over 12 weeks. Main outcomes were physical activity (Godin Leisure-Time Exercise Questionnaire), functional capacity (6 Minute Walk Test), QOL (SF-36), Couples' trust (Dyadic Trust Scale), and other dyadic outcomes. Exit interviews were completed by all participating couples. Thirty-one women survivors (68% breast cancer) and their partners participated. Survivors were 57.9 years old on average and 22.6% African American. Partners had similar characteristics. RHYTHM had significant positive effects on physical activity (p = 0.05), on the mental component of QOL (p = 0.04), on vitality (p = 0.03), and on the dyadic trust scale (p = 0.04). Couples expressed satisfaction with the intervention including appreciating the opportunity to spend time and exercise together. Survivors saw this light-intensity physical activity as easing them into becoming more physically active. Light intensity ballroom dancing has the potential to improve cancer survivors' QOL. Larger trials are needed to build strong support for this ubiquitous and acceptable activity. Ballroom dance may be an important tool for cancer survivors to return to a physically active life and improve QOL and other aspects of their intimate life.

Blood lead level and physical fitness of schoolchildren in the copper basin of south-western Poland: indirect effects through growth stunting.

PubMed

Ignasiak, Zosia; Sławinska, Teresa; Rozek, Krystyna; Malina, Robert; Little, B B

2007-01-01

The present study was set in the context of two questions. First, does blood lead level exert a direct effect on measures of physical fitness? And second, might blood lead influence physical fitness indirectly through growth stunting? Blood lead level is negatively associated with performances on a variety of fine motor tasks. Corresponding information on associations with measures of physical fitness and gross motor coordination are limited. Schoolchildren 7-15 years of age (463 males, 436 females) living in the vicinity of copper smelters and refineries were tested for blood lead. In addition to body size and blood lead, physical fitness was measured: right and left grip strength, timed sit-ups, flexed arm hang, plate tapping, shuttle run, standing long jump and medicine ball throw. Simple reaction time was also measured. The effect of blood lead level on physical fitness was indirect and small, and operated through anthropometric dimensions that more directly influenced the measures of fitness. Direct effects of blood lead level on indicators of physical fitness in school age youth are not evident. Blood lead level adversely affects physical fitness indirectly through growth stunting.

Prevalence and perpetrators of workplace violence by nursing unit and the relationship between violence and the perceived work environment.

PubMed

Park, Mihyun; Cho, Sung-Hyun; Hong, Hyun-Ja

2015-01-01

To identify the prevalence and perpetrators of workplace violence against nurses and to examine the relationship of work demands and trust and justice in the workplace with the occurrence of violence. This study employed cross-sectional data from a 2013 nurse survey conducted at a university hospital in Seoul, South Korea. The study sample included 970 female nurses from 47 nursing units, including general, oncology, intensive care units (ICUs), operating rooms, and outpatient departments. The second version of the medium-sized Copenhagen Psychosocial Questionnaire (COPSOQ II) was used to measure work demands (i.e., quantitative demands, work pace, and emotional demands), trust and justice, and violence. Relationships among those variables were examined by conducting multiple logistic regression analyses with multilevel modeling. The 12-month prevalence of verbal abuse (63.8%) was highest, followed by threats of violence (41.6%), physical violence (22.3%), and sexual harassment (19.7%), but bullying had the lowest prevalence (9.7%). Physical violence, threats of violence, and verbal abuse occurred most frequently in ICUs, whereas sexual harassment and bullying were highest in operating rooms. The main perpetrators were patients, followed by physicians and patients' families. Nurses perceiving greater work demands and less trust and justice were more likely to have been exposed to violence. The prevalence and perpetrators of violence varied considerably among nursing units. Greater work demands and less trust and justice were associated with nurses' experiences of violence. Adequate work demands and a trusted and just work environment may reduce violence against nurses. In return, reduction of violence will contribute to creating a better nursing work environment. © 2014 Sigma Theta Tau International.

Thermal and Surface Evaluation on The Process of Forming a Cu2O/CuO Semiconductor Photocatalyst on a Thin Copper Plate

NASA Astrophysics Data System (ADS)

Zainul, R.; Oktavia, B.; Dewata, I.; Efendi, J.

2018-04-01

This research aims to investigate the process of forming a multi-scale copper oxide semiconductor (CuO/Cu2O) through a process of calcining a copper plate. The changes that occur during the formation of the oxide are thermally and surface evaluated. Evaluation using Differential Thermal Analysis (DTA) obtained by surface change of copper plate happened at temperature 380°C. Calcination of oxide formation was carried out at temperature 380°C for 1 hour. Surface evaluation process by using Scanning Electron Microscope (SEM) surface and cross-section, to determine diffusion of oxide formation on copper plate. The material composition is monitored by XRF and XRD to explain the process of structural and physical changes of the copper oxide plate formed during the heating process. The thickness of Cu plates used is 200-250 μm. SEM analysis results, the oxygen atom interruption region is in the range of 20-30 μm, and diffuses deeper during thermal oxidation process. The maximum diffusion depth of oxygen atoms reaches 129 μm.

Electrochemical Control of Copper Intercalation into Nanoscale Bi 2Se 3

DOE PAGES

Zhang, Jinsong; Sun, Jie; Li, Yanbin; ...

2017-02-20

Intercalation of exotic atoms or molecules into the layered materials remains an extensively investigated subject in current physics and chemistry. However, traditionally melt-growth and chemical interaction strategies are either limited by insufficiency of intercalant concentrations or destitute of accurate controllability. Here, we have developed a general electrochemical intercalation method to efficaciously regulate the concentration of zerovalent copper atoms into layered Bi 2Se 3, followed by comprehensive experimental characterization and analyses. Up to 57% copper atoms (Cu 6.7Bi 2Se 3) can be intercalated with no disruption to the host lattice. Meanwhile the unconventional resistance dip accompanied by a hysteresis loop belowmore » 40 K, as well as the emergence of new Raman peak in Cu xBi 2Se 3, is a distinct manifestation of the interplay between intercalated Cu atoms with Bi 2Se 3 host. Furthermore, our work demonstrates a new methodology to study fundamentally new and unexpected physical behaviors in intercalated metastable materials.« less

The ultimate physical limits of privacy

NASA Astrophysics Data System (ADS)

Ekert, Artur; Renner, Renato

2014-03-01

Among those who make a living from the science of secrecy, worry and paranoia are just signs of professionalism. Can we protect our secrets against those who wield superior technological powers? Can we trust those who provide us with tools for protection? Can we even trust ourselves, our own freedom of choice? Recent developments in quantum cryptography show that some of these questions can be addressed and discussed in precise and operational terms, suggesting that privacy is indeed possible under surprisingly weak assumptions.

The ultimate physical limits of privacy.

PubMed

Ekert, Artur; Renner, Renato

2014-03-27

Among those who make a living from the science of secrecy, worry and paranoia are just signs of professionalism. Can we protect our secrets against those who wield superior technological powers? Can we trust those who provide us with tools for protection? Can we even trust ourselves, our own freedom of choice? Recent developments in quantum cryptography show that some of these questions can be addressed and discussed in precise and operational terms, suggesting that privacy is indeed possible under surprisingly weak assumptions.

Neither the internist nor the Internet: use of and trust in health information sources by people with schizophrenia.

PubMed

Maguire, Paul A; Reay, Rebecca E; Looi, Jeffrey C L; Cubis, Jeff; Byrne, Gerard J; Raphael, Beverley

2011-06-01

The aim of this study was to explore health information sources accessed by people with schizophrenia and the level of trust invested in them. A cross-sectional survey was performed comparing the responses of 71 adults with schizophrenia (recruited from both community and inpatient settings) with 238 general practice attendees on their use of television, radio, the Internet, newspapers, magazines, family and friends, and doctor to obtain information on health matters, and their levels of trust in these sources. People with schizophrenia most commonly reported using a doctor, family and friends, and television to obtain information on health matters. However, compared with general practice attendees, they gained less health information from doctors and the Internet, and had less trust in doctors. Within-group analysis revealed that in people with schizophrenia: living alone increased the likelihood of obtaining health information from television; a higher level of education increased the odds of trusting the Internet as a health information source; a higher estimated household income was associated with an increased likelihood of trusting newspapers; and women with schizophrenia were considerably more likely than men with schizophrenia to trust family and friends as providers of health information. For both groups, there were significant positive correlations between the amount of health information obtained from a given information source and the level of trust invested in it. There are significant differences in the reported utilization and trust of health information sources between people with schizophrenia and attendees at general practice settings. Those with schizophrenia are less likely to trust and obtain information from a doctor, and less likely to access the Internet. Further research is required to explore this disparity. This is critical given the high rates of comorbid physical illness and reduced longevity in people suffering from schizophrenia.

Effect of Silica Particle Size on Texture, Structure, and Catalytic Performance of Cu/SiO2 Catalysts for Glycerol Hydrogenolysis

NASA Astrophysics Data System (ADS)

Qi, Ye Tong; Zhe, Chen Hong; Ning, Xiang

2018-03-01

The influences of carrier particle sizes of Cu/SiO2 catalysts for hydrogenolysis of glycerol were studied use mono-dispersed silica as models. Catalysts were prepared by precipitation method with the average size of the mono-dispersed silica supports varying of 10, 20, and 90 nm. Characterization of the catalysts show that the physical properties such as pore volume and BET surface area of the catalysts were largely affected by the carrier particle size of silica. However, the copper dispersion of the three samples were similar. XPS patterns show a difference in the chemical states of copper species, small carrier particle size induced formation of copper phyllosilicate, which benefits on the stability of copper species in reaction. The overall activity in the reaction of glycerol hydrogenolysis shows a correlation with the carrier particle size. The small carrier particles prevent the copper species from aggregation thus such catalysts exhibit good catalytic activity and stability.

Leaching for recovery of copper from municipal solid waste incineration fly ash: influence of ash properties and metal speciation.

PubMed

Lassesson, Henric; Fedje, Karin Karlfeldt; Steenari, Britt-Marie

2014-08-01

Recovery of metals occurring in significant amounts in municipal solid waste incineration fly ash, such as copper, could offer several advantages: a decreased amount of potentially mobile metal compounds going to landfill, saving of natural resources and a monetary value. A combination of leaching and solvent extraction may constitute a feasible recovery path for metals from municipal solid waste incineration fly ash. However, it has been shown that the initial dissolution and leaching is a limiting step in such a recovery process. The work described in this article was focused on elucidating physical and chemical differences between two ash samples with the aim of explaining the differences in copper release from these samples in two leaching methods. The results showed that the chemical speciation is an important factor affecting the release of copper. The occurrence of copper as phosphate or silicate will hinder leaching, while sulphate and chloride will facilitate leaching. © The Author(s) 2014.

Weathering of sulfidic shale and copper mine waste: Secondary minerals and metal cycling in Great Smoky Mountains National Park, Tennessee, and North Carolina, USA

USGS Publications Warehouse

Hammarstrom, J.M.; Seal, R.R.; Meier, A.L.; Jackson, J.C.

2003-01-01

Metal cycling via physical and chemical weathering of discrete sources (copper mines) and regional (non-point) sources (sulfide-rich shale) is evaluated by examining the mineralogy and chemistry of weathering products in Great Smoky Mountains National Park, Tennessee, and North Carolina, USA. The elements in copper mine waste, secondary minerals, stream sediments, and waters that are most likely to have negative impacts on aquatic ecosystems are aluminum, copper, zinc, and arsenic because these elements locally exceed toxicity guidelines for surface waters or for stream sediments. Acid-mine drainage has not developed in streams draining inactive copper mines. Acid-rock drainage and chemical weathering processes that accompany debris flows or human disturbances of sulfidic rocks are comparable to processes that develop acid-mine drainage elsewhere. Despite the high rainfall in the mountain range, sheltered areas and intermittent dry spells provide local venues for development of secondary weathering products that can impact aquatic ecosystems.

Evidence for the role of copper in the injury process of coliform bacteria in drinking water. [Escherichia coli

DOE Office of Scientific and Technical Information (OSTI.GOV)

Domek, M.J.; LeChevallier, M.W.; Cameron, S.C.

1984-08-01

Low levels of copper in chlorine-free distribution water caused injury of coliform populations. Monitoring of 44 drinking water samples indicated that 64% of the coliform population was injured. Physical and chemical parameters were measured, including three heavy metals (Cu, Cd, and Pb). Copper concentrations were important, ranging from 0.007 to 0.54 mg/liter. Statistical analyses of these factors were used to develop a model to predict coliform injury. The model predicted almost 90% injury with a copper concentration near the mean observed value (0.158 mg/liter) in distribution waters. Laboratory studies with copper concentrations of 0.025 and 0.050 mg/liter in an inorganicmore » carbon buffer under controlled conditions of temperature and pH caused over 90% injury within 6 and 2 days, respectively. Studies of the metabolism of injured Escherichia coli cells indicated that the respiratory chain is at least one site of damage in injured cells.« less

77 FR 3106 - Damages Received on Account of Personal Physical Injuries or Physical Sickness

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-23

...). * * * * * Steven T. Miller, Deputy Commissioner for Services and Enforcement. Approved: December 6, 2011. Emily S..., however, Commissioner v. Schleier, 515 U.S. 323 (1995), has interpreted the statutory ``on account of... aside for the claimant's benefit in a trust or fund, such as a qualified settlement fund described in...

Copper slag as a catalyst for mercury oxidation in coal combustion flue gas.

PubMed

Li, Hailong; Zhang, Weilin; Wang, Jun; Yang, Zequn; Li, Liqing; Shih, Kaimin

2018-04-01

Copper slag is a byproduct of the pyrometallurgical smelting of copper concentrate. It was used in this study to catalyze elemental mercury (Hg 0 ) oxidation in simulated coal combustion flue gas. The copper slag exhibited excellent catalytic performance in Hg 0 oxidation at temperatures between 200 °C and 300 °C. At the most optimal temperature of 250 °C, a Hg 0 oxidation efficiency of 93.8% was achieved under simulated coal combustion flue gas with both a high Hg 0 concentration and a high gas hourly space velocity of 128,000 h -1 . Hydrogen chloride (HCl) was the flue gas component responsible for Hg 0 oxidation over the copper slag. The transition metal oxides, including iron oxides and copper oxide in the copper slag, exhibited significant catalytic activities in the surface-mediated oxidation of Hg 0 in the presence of HCl. It is proposed that the Hg 0 oxidation over the copper slag followed the Langmuir-Hinshelwood mechanism whereby reactive chlorine species that originated from HCl reacted with the physically adsorbed Hg 0 to form oxidized mercury. This study demonstrated the possibility of reusing copper slag as a catalyst for Hg 0 oxidation and revealed the mechanisms involved in the process and the key factors in the performance. This knowledge has fundamental importance in simultaneously reducing industrial waste and controlling mercury emissions from coal-fired power plants. Copyright © 2017 Elsevier Ltd. All rights reserved.

Relation of serum γ-glutamyl transferase activity with copper in an adult population.

PubMed

Peng, You-Fan; Wang, Chun-Fang; Pan, Guo-Gang

2017-10-26

The aim of this study was to evaluate the relationship between serum γ-glutamyl transferase (γ-GGT) activity and serum copper in an adult population. We analyzed 281 adult subjects who regularly attended the physical examination center at the Affiliated Hospital of Youjiang Medical University for Nationalities. The demographic and laboratory data of the participants were divided into two groups according to the median of serum γ-GGT activity. Serum copper concentrations in individuals with higher γ-GGT levels were significantly increased compared with those with lower γ-GGT concentrations (9.9±2.41 vs. 11.2±3.36 μmol/L, p<0.001). There was a positive correlation between serum γ-GGT activity and copper in all eligible subjects (r=0.198, p=0.001). Further, serum γ-GGT maintained a positive correlation with serum copper in both males and females (r=0.322, p<0.001; r=0.230, p=0.010). The results of multiple linear regression analysis showed that serum γ-GGT maintained a significantly positive correlation with copper after adjusting for multiple potential confounders (b=0.464, p=0.001). This study suggests that serum γ-GGT activity is correlated with copper in the study population, indicating that serum γ-GGT may be a biomarker to evaluate serum copper levels in an adult population.

Biosorption of copper by cyanobacterial bloom-derived biomass harvested from the eutrophic Lake Dianchi in China.

PubMed

Wang, Kan; Colica, Giovanni; De Philippis, Roberto; Liu, Yongding; Li, Dunhai

2010-10-01

Biomass of cyanobacterial bloom from Lake Dianchi was used as a biosorbent for copper removal from aqueous solution. The maximum capacity was found at conditions of pH 4, initial concentration of copper was 10 mg/l and initial dose of biomass was 1.0 g/l. HNO(3) demonstrated the highest desorption efficiency compared with HCl, EDTA, and citric acid. Physical adsorption was assumed not to be the dominant mechanism of biosorption as revealed by scanning electron microscopy and surface area measurement of the biomass. Infrared ray spectra analysis of the biomass suggested that ion-exchange is the principal mechanism for biosorption. Considering the advantages-low cost, easy to collect, and huge in quantity-the Microcystis bloom biomass could be used as a sorbent for copper and other heavy metals removal.

Loss of Trust in the Neighborhood: The Experience of Older African Americans in Detroit.

PubMed

Fritz, Heather; Cutchin, Malcolm P; Cummins, Emily R

2018-02-19

Although evidence suggests that neighborhood conditions are related to stress and health, the processes connecting neighborhood conditions and stress for older minorities is little explored. The purpose of this analysis is to contribute new insights into this issue. We conducted a qualitative analysis as part of a larger mixed methods study of 100 African Americans aged 55 and older living in neighborhoods of varying quality in Detroit, Michigan. A subsample of (n = 20) older adults took photographs of bothersome aspects of their neighborhoods and participated in in-depth photo-elicitation interviews. Data were analyzed using a grounded theory approach. 'Loss of trust in the neighborhood' emerged as the core category to explain how older African Americans in our sample experienced neighborhood stressors in their daily lives. Loss of trust in physical, social, and institutional dimensions of the neighborhood contributed to the core category. The life course of neighborhoods and the trust placed in them appears to be intimately connected to the well-being of older African Americans. We therefore hypothesize that a fundamental pathway through which neighborhood stressors are experienced for older African Americans in U.S. 'Rust Belt' cities is the multifaceted loss of trust in the neighborhood.

"Left to my own devices, I don't know": using theory and patient-reported barriers to move from physical activity recommendations to practice.

PubMed

Ziebart, C; McArthur, C; Lee, L; Papaioannou, A; Laprade, J; Cheung, A M; Jain, R; Giangregorio, L

2018-05-01

Knowledge exchange with community-dwelling individuals across Ontario revealed barriers to implementation of physical activity recommendations that reflected capability, opportunity, and motivation; barriers unique to individuals with osteoporosis include fear of fracturing, trust in providers, and knowledge of exercise terminology. Using the Behaviour Change Wheel, we identified interventions (training, education, modeling) and policy categories (communication/marketing, guidelines, service provision). Physical activity recommendations exist for individuals with osteoporosis; however, to change behavior, we must address barriers and facilitators to their implementation. The purposes of this project are (1) to identify barriers to and facilitators of uptake of disease-specific physical activity recommendations (2) to use the findings to identify behavior change strategies using the Behaviour Change Wheel (BCW). Focus groups and semi-structured interviews were conducted with community-dwelling individuals attending osteoporosis-related programs or education sessions in Ontario. They were stratified by geographic area, urban/rural, and gender, and transcribed verbatim. Two researchers coded data and identified emerging themes. Using the Behaviour Change Wheel framework, themes were categorized into capability, opportunity, and motivation, and interventions were identified. Two hundred forty community-dwelling individuals across Ontario participated (mean ± SD age = 72 ± 8.28). Barriers were as follows: capability: disease-related symptoms hinder exercise and physical activity participation, lack of exercise-related knowledge, low exercise self-efficacy; opportunity: access to exercise programs that meet needs and preferences, limited resources and time, physical activity norms and preferences; motivation: incentives to exercise, fear of fracturing, trust in exercise providers. Interventions selected were training, education, and modeling. Policy categories selected were communication/marketing, guidelines, and service provision. Barriers unique to individuals with osteoporosis included the following: lack of knowledge on key exercise concepts, fear of fracturing, and trust in providers. Behavior change techniques may need tailoring to gender, age, or presence of comorbid conditions.

Reflectometry-Ellipsometry Reveals Thickness, Growth Rate, and Phase Composition in Oxidation of Copper.

PubMed

Diaz Leon, Juan J; Fryauf, David M; Cormia, Robert D; Zhang, Min-Xian Max; Samuels, Kathryn; Williams, R Stanley; Kobayashi, Nobuhiko P

2016-08-31

The oxidation of copper is a complicated process. Copper oxide develops two stable phases at room temperature and standard pressure (RTSP): cuprous oxide (Cu2O) and cupric oxide (CuO). Both phases have different optical and electrical characteristics that make them interesting for applications such as solar cells or resistive switching devices. For a given application, it is necessary to selectively control oxide thickness and cupric/cuprous oxide phase volume fraction. The thickness and composition of a copper oxide film growing on the surface of copper widely depend on the characteristics of as-deposited copper. In this Research Article, two samples, copper films prepared by two different deposition techniques, electron-beam evaporation and sputtering, were studied. As the core part of the study, the formation of the oxidized copper was analyzed routinely over a period of 253 days using spectroscopic polarized reflectometry-spectroscopic ellipsometry (RE). An effective medium approximation (EMA) model was used to fit the RE data. The RE measurements were complemented and validated by using X-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM) and X-ray diffraction (XRD). Our results show that the two samples oxidized under identical laboratory ambient conditions (RTSP, 87% average relative humidity) developed unique oxide films following an inverse-logarithmic growth rate with thickness and composition different from each other over time. Discussion is focused on the ability of RE to simultaneously extract thickness (i.e., growth rate) and composition of copper oxide films and on plausible physical mechanisms responsible for unique oxidation habits observed in the two copper samples. It appears that extended surface characteristics (i.e., surface roughness and grain boundaries) and preferential crystalline orientation of as-deposited polycrystalline copper films control the growth kinetics of the copper oxide film. Analysis based on a noncontact and nondestructive measurement, such as RE, to extract key material parameters is beneficial for conveniently understanding the oxidation process that would ultimately enable copper oxide-based devices at manufacturing scales.

Social and Physical Environments and Self-Rated Health in Urban and Rural Communities in Korea

PubMed Central

Lee, Jung-A; Park, Jong Heon; Kim, Myung

2015-01-01

This study evaluated the associations between social and physical environments and self-rated health (SRH) for urban and rural Korean adults, using data from the Korean Community Health Survey (KCHS) of 199,790 participants (115,454 urban and 84,336 rural). The main dependent variable was SRH, while the primary independent variables were social and physical characteristics. Urban residents reported better SRH than did rural residents. Five social environmental variables (trust of neighbors, residence in the area for over 20 years, exchanging help with neighbors, friend and fellowship activities, contact with relatives and neighbors over five times per month) were more prevalent among rural residents. Satisfaction with physical environment was more common among rural residents, but satisfaction with traffic and healthcare facilities was more common among urban areas. After adjusting for relevant factors, positive associations between SRH and trust of neighbors, exchanging help with neighbors, participation in social activities or organizations, and physical environment existed in both rural and urban populations. Also, in both areas, there was no demonstrated association between SRH and years of residence or frequency of contact with relatives. Our findings suggest the existence of an association between social and physical factors and perceived health status among the general population of Korea. PMID:26569279

Physical and Chemical Properties of the Copper-Alanine System: An Advanced Laboratory Project

ERIC Educational Resources Information Center

Farrell, John J.

1977-01-01

An integrated physical-analytical-inorganic chemistry laboratory procedure for use with undergraduate biology majors is described. The procedure requires five to six laboratory periods and includes acid-base standardizations, potentiometric determinations, computer usage, spectrophotometric determinations of crystal-field splitting…

Suprathermal electrons in kJ-laser produced plasmas: M- shell resolved high-resolution x-ray spectroscopic study of transient matter evolution

NASA Astrophysics Data System (ADS)

Condamine, F. P.; Šmíd, M.; Renner, O.; Dozières, M.; Thais, F.; Angelo, P.; Bobin, J.-L.; Rosmej, F. B.

2016-05-01

Hot electrons are of key importance to understand many physical processes in plasma physics. They impact strongly on atomic physics as almost all radiative properties are seriously modified. X-ray spectroscopy is of particular interest due to reduced photoabsorption in dense matter. We report on a study of the copper Kα X-ray emission conducted at the ns, kJ laser facility PALS, Prague, Czech Republic. Thin copper foils have been irradiated with 1ω pulses. Two spherically bent quartz Bragg crystal spectrometers with high spectral and spatial resolution have been set up simultaneously to achieve a high level of confidence in the spectral distribution. In particular, an emission on the red wing of the Kα2 transition (λ = 1.5444 Å) could be identified with complex atomic structure calculations. We discuss possible implications for the analysis of non-equilibrium phenomena and present first atomic physics simulations.

A survey of the health needs of hospital staff: implications for health care managers.

PubMed

Jinks, Annette M; Lawson, Valerie; Daniels, Ruth

2003-09-01

Developing strategies to address the health needs of the National Health Services (NHS) workforce are of concern to many health care managers. Focal to the development of such strategies are of being in receipt of baseline information about employees expressed health needs and concerns. This article addresses obtaining such baseline information and presents the findings of a health needs survey of acute hospital staff in a trust in North Wales. The total population of trust employees were surveyed (n = 2300) and a 44% (n = 1021) response rate was achieved. A number of positive findings are given. Included are that the majority of those surveyed stated that their current health status is good, are motivated to improve their health further, do not smoke and their alcohol consumption is within recommended levels. There appears, however, to be a number of areas where trust managers can help its staff improve their health. Included are trust initiatives that focus on weight control and taking more exercise. In addition, there appears to be a reported lack of knowledge and positive health behaviour amongst the male respondents surveyed that would imply the trust needs to be more effective in promoting well man type issues. Finally there appears to be a general lack of pride in working for the trust and a pervasive feeling that the trust does not care about its employees that needs to be addressed. It is concluded that the findings of this survey have implications for management practices in the trust where the survey was conducted and also wider applicability to the management of health care professionals. For example, addressing work-related psychological and physical problems of employees are of importance to all health care managers. This is especially so when considering recruitment and retention issues.

Principles of Faithful Execution in the implementation of trusted objects.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tarman, Thomas David; Campbell, Philip LaRoche; Pierson, Lyndon George

2003-09-01

We begin with the following definitions: Definition: A trusted volume is the computing machinery (including communication lines) within which data is assumed to be physically protected from an adversary. A trusted volume provides both integrity and privacy. Definition: Program integrity consists of the protection necessary to enable the detection of changes in the bits comprising a program as specified by the developer, for the entire time that the program is outside a trusted volume. For ease of discussion we consider program integrity to be the aggregation of two elements: instruction integrity (detection of changes in the bits within an instructionmore » or block of instructions), and sequence integrity (detection of changes in the locations of instructions within a program). Definition: Faithful Execution (FE) is a type of software protection that begins when the software leaves the control of the developer and ends within the trusted volume of a target processor. That is, FE provides program integrity, even while the program is in execution. (As we will show below, FE schemes are a function of trusted volume size.) FE is a necessary quality for computing. Without it we cannot trust computations. In the early days of computing FE came for free since the software never left a trusted volume. At that time the execution environment was the same as the development environment. In some circles that environment was referred to as a ''closed shop:'' all of the software that was used there was developed there. When an organization bought a large computer from a vendor the organization would run its own operating system on that computer, use only its own editors, only its own compilers, only its own debuggers, and so on. However, with the continuing maturity of computing technology, FE becomes increasingly difficult to achieve« less

Trusted measurement model based on multitenant behaviors.

PubMed

Ning, Zhen-Hu; Shen, Chang-Xiang; Zhao, Yong; Liang, Peng

2014-01-01

With a fast growing pervasive computing, especially cloud computing, the behaviour measurement is at the core and plays a vital role. A new behaviour measurement tailored for Multitenants in cloud computing is needed urgently to fundamentally establish trust relationship. Based on our previous research, we propose an improved trust relationship scheme which captures the world of cloud computing where multitenants share the same physical computing platform. Here, we first present the related work on multitenant behaviour; secondly, we give the scheme of behaviour measurement where decoupling of multitenants is taken into account; thirdly, we explicitly explain our decoupling algorithm for multitenants; fourthly, we introduce a new way of similarity calculation for deviation control, which fits the coupled multitenants under study well; lastly, we design the experiments to test our scheme.

Trusted Measurement Model Based on Multitenant Behaviors

PubMed Central

Ning, Zhen-Hu; Shen, Chang-Xiang; Zhao, Yong; Liang, Peng

2014-01-01

With a fast growing pervasive computing, especially cloud computing, the behaviour measurement is at the core and plays a vital role. A new behaviour measurement tailored for Multitenants in cloud computing is needed urgently to fundamentally establish trust relationship. Based on our previous research, we propose an improved trust relationship scheme which captures the world of cloud computing where multitenants share the same physical computing platform. Here, we first present the related work on multitenant behaviour; secondly, we give the scheme of behaviour measurement where decoupling of multitenants is taken into account; thirdly, we explicitly explain our decoupling algorithm for multitenants; fourthly, we introduce a new way of similarity calculation for deviation control, which fits the coupled multitenants under study well; lastly, we design the experiments to test our scheme. PMID:24987731

Sensorimotor Cortex Reorganization in Alzheimer's Disease and Metal Dysfunction: A MEG Study

PubMed Central

Salustri, C.; Tecchio, F.; Zappasodi, F.; Tomasevic, L.; Ercolani, M.; Moffa, F.; Cassetta, E.; Rossini, P. M.; Squitti, R.

2013-01-01

Objective. To verify whether systemic biometals dysfunctions affect neurotransmission in living Alzheimer's disease (AD) patients. Methods. We performed a case-control study using magnetoencephalography to detect sensorimotor fields of AD patients, at rest and during median nerve stimulation. We analyzed position and amount of neurons synchronously activated by the stimulation in both hemispheres to investigate the capability of the primary somatosensory cortex to reorganize its circuitry disrupted by the disease. We also assessed systemic levels of copper, ceruloplasmin, non-Cp copper (i.e., copper not bound to ceruloplasmin), peroxides, transferrin, and total antioxidant capacity. Results. Patients' sensorimotor generators appeared spatially shifted, despite no change of latency and strength, while spontaneous activity sources appeared unchanged. Neuronal reorganization was greater in moderately ill patients, while delta activity increased in severe patients. Non-Cp copper was the only biological variable appearing to be associated with patient sensorimotor transmission. Conclusions. Our data strengthen the notion that non-Cp copper, not copper in general, affects neuronal activity in AD. Significance. High plasticity in the disease early stages in regions controlling more commonly used body parts strengthens the notion that physical and cognitive activities are protective factors against progression of dementia. PMID:24416615

Adelante Ball: A Student-Developed Activity Designed to Increase Motivation and Participation

ERIC Educational Resources Information Center

Hansen, Ken

2010-01-01

Physical education is the type of discipline which can be taught in a variety of settings. While fitness was a principle component of daily instruction, various physical activities also served as the medium for teaching valuable life skills, such as respect, communication, trust, problem solving, and self-direction. In an effort to teach these…

Child Abuse in Religiously-Affiliated Institutions: Long-Term Impact on Men's Mental Health

ERIC Educational Resources Information Center

Wolfe, David A.; Francis, Karen J.; Straatman, Anna-Lee

2006-01-01

Objective: To describe the long-term impact of physical and sexual abuse of boys by someone in a trusting, non-familial relationship. This clinical study reports on the psychological functioning of men (N=76) with substantiated claims against a residential religiously-affiliated institution for multiple and severe incidents of sexual, physical,…

Students' Perception of Relationship Skills during an Adventure-Based Learning Unit within Physical Education

ERIC Educational Resources Information Center

Stuhr, Paul T.; Sutherland, Sue; Ressler, James; Ortiz-Stuhr, Esther M.

2015-01-01

Adventure-based learning (ABL) is a sequenced curriculum using structured physical and team building activities that create the space for participants to work on group communication, cooperation, trust, and problem solving. Reflection (i.e., debriefing) is an essential aspect of the ABL curriculum (Cosgriff, 2000). A debrief in ABL is the…

25 CFR 224.141 - What must the Secretary do if the tribe responds to the Director's order?

Code of Federal Regulations, 2010 CFR

2010-04-01

... DETERMINATION ACT Periodic Reviews Noncompliance § 224.141 What must the Secretary do if the tribe responds to... Secretary will determine whether the noncompliance caused imminent jeopardy to a physical trust asset. (b) If the Secretary determines that the tribe's noncompliance has caused imminent jeopardy to a physical...

Synergistic interaction between oxides of copper and iron for production of fatty alcohols from fatty acids

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kandel, Kapil; Chaudhary, Umesh; Nelson, Nicholas C.

2015-10-08

In this study, the selective hydrogenation of fatty acids to fatty alcohols can be achieved under moderate conditions (180 °C, 30 bar H 2) by simultaneously supporting copper and iron oxides on mesoporous silica nanoparticles. The activity of the cosupported oxides is significantly higher than that of each supported metal oxide and of a physical mixture of both individually supported metal oxides. A strong interaction between both metal oxides is evident from dispersion, XRD, TPR, and acetic acid TPD measurements, which is likely responsible for the synergistic behavior of the catalyst. Copper oxide is reduced in situ to its metallicmore » form and thereby activates hydrogen.« less

INDIAN PEAKS WILDERNESS, COLORADO.

USGS Publications Warehouse

Pearson, Robert C.; Speltz, Charles N.

1984-01-01

The Indian Peaks Wilderness northwest of Denver is partly within the Colorado Mineral Belt, and the southeast part of it contains all the geologic characteristics associated with the several nearby mining districts. Two deposits have demonstrated mineral resources, one of copper and the other of uranium; both are surrounded by areas with probable potential. Two other areas have probable resource potential for copper, gold, and possibly molydenum. Detailed gravity and magnetic studies in the southeast part of the Indian Peaks Wilderness might detect in the subsurface igneous bodies that may be mineralized. Physical exploration such as drilling would be necessary to determine more precisely the copper resources at the Roaring Fork locality and uranium resources at Wheeler Basin.

Preparation of copper-indium-gallium-diselenide precursor films by electrodeposition for fabricating high efficiency solar cells

DOEpatents

Bhattacharya, Raghu N.; Hasoon, Falah S.; Wiesner, Holm; Keane, James; Noufi, Rommel; Ramanathan, Kannan

1999-02-16

A photovoltaic cell exhibiting an overall conversion efficiency of 13.6% is prepared from a copper-indium-gallium-diselenide precursor thin film. The film is fabricated by first simultaneously electrodepositing copper, indium, gallium, and selenium onto a glass/molybdenum substrate (12/14). The electrodeposition voltage is a high frequency AC voltage superimposed upon a DC voltage to improve the morphology and growth rate of the film. The electrodeposition is followed by physical vapor deposition to adjust the final stoichiometry of the thin film to approximately Cu(In.sub.1-n Ga.sub.x)Se.sub.2, with the ratio of Ga/(In+Ga) being approximately 0.39.

Target-specific copper hybrid T7 phage particles.

PubMed

Dasa, Siva Sai Krishna; Jin, Qiaoling; Chen, Chin-Tu; Chen, Liaohai

2012-12-18

Target-specific nanoparticles have attracted significant attention recently, and have greatly impacted life and physical sciences as new agents for imaging, diagnosis, and therapy, as well as building blocks for the assembly of novel complex materials. While most of these particles are synthesized by chemical conjugation of an affinity reagent to polymer or inorganic nanoparticles, we are promoting the use of phage particles as a carrier to host organic or inorganic functional components, as well as to display the affinity reagent on the phage surface, taking advantage of the fact that some phages host well-established vectors for protein expression. An affinity reagent can be structured in a desired geometry on the surface of phage particles, and more importantly, the number of the affinity reagent molecules per phage particle can be precisely controlled. We previously have reported the use of the T7 phage capsid as a template for synthesizing target-specific metal nanoparticles. In this study herein, we reported the synthesis of nanoparticles using an intact T7 phage as a scaffold from which to extend 415 copies of a peptide that contains a hexahistidine (6His) motif for capture of copper ions and staging the conversion of copper ions to copper metal, and a cyclic Arginine-Glycine-Aspartic Acid (RGD4C) motif for targeting integrin and cancer cells. We demonstrated that the recombinant phage could load copper ions under low bulk copper concentrations without interfering with its target specificity. Further reduction of copper ions to copper metal rendered a very stable copper hybrid T7 phage, which prevents the detachment of copper from phage particles and maintains the phage structural integrity even under harsh conditions. Cancer cells (MCF-7) can selectively uptake copper hybrid T7 phage particles through ligand-mediated transmembrane transportation, whereas normal control cells (MCF-12F) uptake 1000-fold less. We further demonstrated that copper hybrid T7 phage could be endocytosed by cancer cells in culture.

Research and development of plasma sprayed tungsten coating on graphite and copper substrates

NASA Astrophysics Data System (ADS)

Liu, Xiang; Zhang, Fu; Tao, Shunyan; Cao, Yunzhen; Xu, Zengyu; Liu, Yong; Noda, N.

2007-06-01

Vacuum plasma sprayed tungsten coating on graphite and copper substrates has been prepared. VPS-W coated graphite has multilayered silicon and tungsten interface pre-deposited by physical vapor deposition (PVD) and VPS-W coated copper has graded transition interlayer. VPS-W coating was characterized, and then the high heat flux properties of the coating were examined. Experimental results indicated that both VPS-W coated graphite and VPS-W coated copper could endure 1000 cycles without visible failure under a heat flux of approximately 5 MW/m2 absorbed power density and 5 s pulse duration. A comparison between the present VPS-W coated graphite and VPS-W coated carbon fiber composite (CX-2002U) with Re interface made by Plansee Aktiengesllshaft was carried out. Results show that both Re and Si are suitable as intermediate layer for tungsten coating on carbon substrates.

A promising structure for fabricating high strength and high electrical conductivity copper alloys

PubMed Central

Li, Rengeng; Kang, Huijun; Chen, Zongning; Fan, Guohua; Zou, Cunlei; Wang, Wei; Zhang, Shaojian; Lu, Yiping; Jie, Jinchuan; Cao, Zhiqiang; Li, Tingju; Wang, Tongmin

2016-01-01

To address the trade-off between strength and electrical conductivity, we propose a strategy: introducing precipitated particles into a structure composed of deformation twins. A Cu-0.3%Zr alloy was designed to verify our strategy. Zirconium was dissolved into a copper matrix by solution treatment prior to cryorolling and precipitated in the form of Cu5Zr from copper matrix via a subsequent aging treatment. The microstructure evolutions of the processed samples were investigated by transmission electron microscopy and X-ray diffraction analysis, and the mechanical and physical behaviours were evaluated through tensile and electrical conductivity tests. The results demonstrated that superior tensile strength (602.04 MPa) and electrical conductivity (81.4% IACS) was achieved. This strategy provides a new route for balancing the strength and electrical conductivity of copper alloys, which can be developed for large-scale industrial application. PMID:26856764

Maternal intuitive eating as a moderator of the association between concern about child weight and restrictive child feeding.

PubMed

Tylka, Tracy L; Lumeng, Julie C; Eneli, Ihuoma U

2015-12-01

Mothers who are concerned about their young child's weight are more likely to use restrictive feeding, which has been associated with increased food seeking behaviors, emotional eating, and overeating in young children across multiple prospective and experimental studies. In the present study, we examined whether mothers' intuitive eating behaviors would moderate the association between their concern about their child's weight and their use of restrictive feeding. In a sample of 180 mothers of young children, two maternal intuitive eating behaviors (i.e., eating for physical reasons, trust in hunger and satiety cues) moderated this association after controlling for maternal age, body mass index, years of education, race/ethnicity, awareness of hunger and satiety cues and perceptions of child weight. More specifically, concern about child weight was unrelated to restrictive feeding for mothers with higher levels of eating for physical reasons and trust in hunger and satiety cues. However, concern about child weight was positively related to restrictive feeding among mothers with lower or average levels of eating for physical reasons and trust in hunger and satiety cues. These findings indicate that it may be important address maternal intuitive eating within interventions designed to improve self-regulated eating in children, as mothers who attend these interventions tend to be highly concerned about their child's weight and, if also low in intuitive eating, may be at risk for using restrictive feeding behaviors that interfere with children's self-regulated eating. Copyright © 2015 Elsevier Ltd. All rights reserved.

Maternal Intuitive Eating as a Moderator of the Association between Concern about Child Weight and Restrictive Child Feeding

PubMed Central

Tylka, Tracy L.; Lumeng, Julie C.; Eneli, Ihuoma U.

2015-01-01

Mothers who are concerned about their young child's weight are more likely to use restrictive feeding, which has been associated with increased food seeking behaviors, emotional eating, and overeating in young children across multiple prospective studies. In the present study, we examined whether mothers' intuitive eating behaviors would moderate the association between their concern about their child's weight and their use of restrictive feeding. In a sample of 180 mothers of young children, two maternal intuitive eating behaviors (i.e., eating for physical reasons, trust in hunger and satiety cues) moderated this association after controlling for maternal age, body mass index, years of education, race/ethnicity, awareness of hunger and satiety cues and perceptions of child weight. More specifically, concern about child weight was unrelated to restrictive feeding for mothers with higher levels of eating for physical reasons and trust in hunger and satiety cues. However, concern about child weight was positively related to restrictive feeding among mothers with lower or average levels of eating for physical reasons and trust in hunger and satiety cues. These findings indicate that it may be important address maternal intuitive eating within interventions designed to improve self-regulated eating in children, as mothers who attend these interventions tend to be highly concerned about their child's weight and, if also low in intuitive eating, may be at risk for using restrictive feeding behaviors that interfere with children's self-regulated eating. PMID:26145275

Yeast Starter as a Biotechnological Tool for Reducing Copper Content in Wine

PubMed Central

Capece, Angela; Romaniello, Rossana; Scrano, Laura; Siesto, Gabriella; Romano, Patrizia

2018-01-01

Copper is widely used in agriculture as a traditional fungicide in organic farming to control downy mildew on grapes, consequently it is possible to find this metal during all stages of the vinification process. Low amounts of copper play a key role on the function of key cell enzymes, whereas excess quantities can exert amount-dependent cytotoxicity, resulting in general cellular damage. Nowadays the excessive copper ions in wines is removed by addition of adsorbents, but these additives can influence the sensory characteristics of wine, as well as detrimental to the health of consumers. It is well known that high concentrations of Cu2+ can be toxic to yeasts, inhibiting growth and activity, causing sluggish fermentation and reducing alcohol production. In this study, 47 S. cerevisiae strains were tested for copper tolerance by two different tests, growth on copper added medium and fermentative activity in copper added grape must. The results obtained by the two different tests were comparable and the high strain variability found was used to select four wild strains, possessing this characteristic at the highest (PP1-13 and A20) and the lowest level (MPR2-24 and A13). The selected strains were tested in synthetic and natural grape must fermentation for ability to reduce copper content in wine. The determination of copper content in wines and yeast cells revealed that at the lowest copper residual in wine corresponded the highest content in yeast cells, indicating a strong strain ability to reduce the copper content in wine. This effect was inversely correlated with strain copper resistance and the most powerful strain in copper reduction was the most sensitive strain, MPR2-24. This wild strain was finally tested as starter culture in cellar pilot scale fermentation in comparison to a commercial starter, confirming the behavior exhibited at lab scale. The use of this wild strain to complete the alcoholic fermentation and remove the copper from wine represents a biotechnological sustainable approach, as alternative to the chemical-physical methods, ensuring at the same time a completed alcoholic fermentation and organoleptic quality of wine. PMID:29375502

DOING Physics--Physics Activities for Groups.

ERIC Educational Resources Information Center

Zwicker, Earl, Ed.

1985-01-01

Students are challenged to investigate a simple electric motor and to build their own model from a battery, wood block, clips, enameled copper wire, bare wire, and sandpaper. Through trial and error, several discoveries are made, including a substitute commutator and use of a radio to detect motor armature contact changes. (DH)

DOING Physics--Physics Activities for Groups.

ERIC Educational Resources Information Center

Zwicker, Earl, Ed.

1985-01-01

Shows how an electric stud finder (available from hardware stores for $15-20) is used to detect changes in capacitance produced by changes in thickness of a medium or in dielectric constant. Also describes how to construct an inexpensive motor from a battery, rubber bands, ceramic magnet, and copper wire. (DH)

Effect of Filler and Heat Treatment on the Physical and Mechanical Properties of the Brazed Joint between Carbide Tip and Steel

NASA Astrophysics Data System (ADS)

Winardi, Y.; Triyono; Wijayanta, A. T.

2017-02-01

In this study, the effect of filler and heat treatment on the physical and mechanical properties of the brazed joint carbide tip and steel was investigated. Tip carbide YG6 and low carbon steel (SS400) is joining by torch brazing with two filler metals, silver, and copper filler. Heat treatment was performed in induction furnace. Microstructure and shear strength of the brazed joint have been investigated. Many silver filler layer are formed on the surface of the base metal rather then using copper filler. The highest shear strength is achieved using a silver filler metal at temperatur 725°C. The highest shear load is 18.62 kN.

Suppression of copper thin film loss during graphene synthesis.

PubMed

Lee, Alvin L; Tao, Li; Akinwande, Deji

2015-01-28

Thin metal films can be used to catalyze the growth of nanomaterials in place of the bulk metal, while greatly reducing the amount of material used. A big drawback of copper thin films (0.5-1.5 μm thick) is that, under high temperature/vacuum synthesis, the mass loss of films severely reduces the process time due to discontinuities in the metal film, thereby limiting the time scale for controlling metal grain and film growth. In this work, we have developed a facile method, namely "covered growth" to extend the time copper thin films can be exposed to high temperature/vacuum environment for graphene synthesis. The key to preventing severe mass loss of copper film during the high temperature chemical vapor deposition (CVD) process is to have a cover piece on top of the growth substrate. This new "covered growth" method enables the high-temperature annealing of the copper film upward of 4 h with minimal mass loss, while increasing copper film grain and graphene domain size. Graphene was then successfully grown on the capped copper film with subsequent transfer for device fabrication. Device characterization indicated equivalent physical, chemical, and electrical properties to conventional CVD graphene. Our "covered growth" provides a convenient and effective solution to the mass loss issue of thin films that serve as catalysts for a variety of 2D material syntheses.

Health disparities in awareness of physical activity and cancer prevention: findings from the National Cancer Institute's 2007 Health Information National Trends Survey (HINTS).

PubMed

Oh, April; Shaikh, Abdul; Waters, Erika; Atienza, Audie; Moser, Richard P; Perna, Frank

2010-01-01

This national study examines differences between racial/ethnic groups on awareness of physical activity and reduced cancer risk and explores correlates of awareness including trust, demographic, and health characteristics within racial/ethnic groups. The 2007 Health Information and National Trends Survey (HINTS) provided data for this study. After exclusions, 6,809 adults were included in analyses. Awareness of physical activity in reduced cancer risk was the main outcome. Logistic regression models tested relationships. Non-Hispanic Blacks had a 0.71 (0.54,0.93) lower odds of being aware of physical activity in reduced cancer risk than non-Hispanic Whites. Current attempts to lose weight were associated with greater odds for awareness among non-Hispanic Blacks and Hispanics (p < .01). Among non-Hispanic Blacks, trust in traditional and Internet media was associated with greater odds of awareness (p < .01). This study is the first national study to examine racial/ethnic disparities in awareness of physical activity and cancer risk. Comparisons between racial/ethnic groups found Black-White disparities in awareness. Variables associated with awareness within racial/ethnic groups identify potential subgroups to whom communication efforts to promote awareness may be targeted.

78 FR 26669 - Self-Regulatory Organizations; EDGX Exchange, Inc.; Notice of Filing and Immediate Effectiveness...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-05-07

... gigabyte Copper circuit; $750 per physical port that connects to the System via a 1 gigabyte Fiber circuit; and $1,000 per physical port that connects to the System via a 10 gigabyte Fiber circuit. The Exchange... physical port that connects to the System via a 1 gigabyte Fiber circuit from $750 to $1,000; (ii) increase...

Trusted Silicon Stratus (TSS) Workshop

DTIC Science & Technology

2011-02-01

business case for a proposed Infrastructure-as-a- Service (IaaS)/ Software -as-a- Service ( SaaS ) cloud architecture. User desires for innovative pricing and...Public Physically Unclonable Function PUF Physically Unclonable Function SaaS Software -as-a- Service SIP Semiconductor Intellectual Property SNL...WORKSHOP NIMBIS SERVICES INCORPORATED FEBRUARY 2011 FINAL TECHNICAL REPORT  ROME, NY 13441 UNITED STATES AIR FORCE  AIR FORCE

VLSI Design of Trusted Virtual Sensors.

PubMed

Martínez-Rodríguez, Macarena C; Prada-Delgado, Miguel A; Brox, Piedad; Baturone, Iluminada

2018-01-25

This work presents a Very Large Scale Integration (VLSI) design of trusted virtual sensors providing a minimum unitary cost and very good figures of size, speed and power consumption. The sensed variable is estimated by a virtual sensor based on a configurable and programmable PieceWise-Affine hyper-Rectangular (PWAR) model. An algorithm is presented to find the best values of the programmable parameters given a set of (empirical or simulated) input-output data. The VLSI design of the trusted virtual sensor uses the fast authenticated encryption algorithm, AEGIS, to ensure the integrity of the provided virtual measurement and to encrypt it, and a Physical Unclonable Function (PUF) based on a Static Random Access Memory (SRAM) to ensure the integrity of the sensor itself. Implementation results of a prototype designed in a 90-nm Complementary Metal Oxide Semiconductor (CMOS) technology show that the active silicon area of the trusted virtual sensor is 0.86 mm 2 and its power consumption when trusted sensing at 50 MHz is 7.12 mW. The maximum operation frequency is 85 MHz, which allows response times lower than 0.25 μ s. As application example, the designed prototype was programmed to estimate the yaw rate in a vehicle, obtaining root mean square errors lower than 1.1%. Experimental results of the employed PUF show the robustness of the trusted sensing against aging and variations of the operation conditions, namely, temperature and power supply voltage (final value as well as ramp-up time).

VLSI Design of Trusted Virtual Sensors

PubMed Central

2018-01-01

This work presents a Very Large Scale Integration (VLSI) design of trusted virtual sensors providing a minimum unitary cost and very good figures of size, speed and power consumption. The sensed variable is estimated by a virtual sensor based on a configurable and programmable PieceWise-Affine hyper-Rectangular (PWAR) model. An algorithm is presented to find the best values of the programmable parameters given a set of (empirical or simulated) input-output data. The VLSI design of the trusted virtual sensor uses the fast authenticated encryption algorithm, AEGIS, to ensure the integrity of the provided virtual measurement and to encrypt it, and a Physical Unclonable Function (PUF) based on a Static Random Access Memory (SRAM) to ensure the integrity of the sensor itself. Implementation results of a prototype designed in a 90-nm Complementary Metal Oxide Semiconductor (CMOS) technology show that the active silicon area of the trusted virtual sensor is 0.86 mm2 and its power consumption when trusted sensing at 50 MHz is 7.12 mW. The maximum operation frequency is 85 MHz, which allows response times lower than 0.25 μs. As application example, the designed prototype was programmed to estimate the yaw rate in a vehicle, obtaining root mean square errors lower than 1.1%. Experimental results of the employed PUF show the robustness of the trusted sensing against aging and variations of the operation conditions, namely, temperature and power supply voltage (final value as well as ramp-up time). PMID:29370141

Copper link evaluations/solutions for fiber channel, SSA, SONET, ATM, and other services through 4 Gb/sec: basic information, test results, and evaluation

NASA Astrophysics Data System (ADS)

Leib, Michael J.

1995-10-01

Technitrol, the original designer of MIL-STD-1553 transformers, the original military 1Mb/s LAN, has advanced the state of the art one further notch, introducing a series of transceivers that allow high speed (through 1 Gb/s) data transmission over copper wire instead of fiber optic cable. One such device can be employed to implement the Fiber Channel Interface as defined by hte X3T11 ANSI Fibre Channel Committee using either mini coax, Type 1 shielded twisted pair, twinax or video cable. The technology now exists to upgrade data transmission rates on current physical media to speeds formerly only available with fiber optic cabling. Copper transceiver technology provides a cost effective alternative for dealing with demanding high speed applications such as high speed serial data transfer, high speed disk and tape storage transfer, imaging telemetry, radar, and other avionics applications. Eye diagrams will be presented to show that excellent data transmission at rates of 1 gigabit/sec with low jitter is capable over mini coax at distances to approximately 50 meters, shielded twisted pair and twinax cable to distances of 105 meters, and video cable to distances of 175 meters. Distances are further at lower data rates. As a member of the X3T11 ANSI Fiber Channel Committee, Technitrol has developed a Physical Media (copper wire) Dependant (PMD) transceiver not only compliant with the Fibre Channel Specifications but exceeding the specifications by a factor greater than four. Conceivably, this opens high speed interconnections for today's high data rate requirements to copper cabling systems. Fibre Optic problems need not be dealt with to obtain data transfers for high speed information transfers.

The association between serum copper concentrations and cardiovascular disease risk factors in children and adolescents in NHANES.

PubMed

Zang, Xiaodong; Huang, Hesuyuan; Zhuang, Zhulun; Chen, Runsen; Xie, Zongyun; Xu, Cheng; Mo, Xuming

2018-06-01

Copper is an essential element in human beings, alterations in serum copper levels could potentially have effect on human health. To date, no data are available regarding how serum copper affects cardiovascular disease (CVD) risk factors in children and adolescents. We examined the association between serum copper levels and CVD risk factors in children and adolescents. We analyzed data consisting of 1427 subjects from a nationally representative sample of the US population in the National Health and Nutrition Examination Survey (NHANES) from 2011 to 2014. The CVD risk factors included total cholesterol, HDL-cholesterol, LDL-cholesterol, triglycerides, fasting glucose, glycohemoglobin, fasting insulin, and blood pressure. Multivariate and generalized linear regressions were performed to investigate associations adjusted for age, gender, ethnicity, poverty:income ratio (PIR), BMI, energy intake, and physical activity. We found significant associations between serum copper and total cholesterol (coefficient = 0.132; 95% CI 0.081, 0.182; P for trend < 0.001), glycohemoglobin (coefficient = 0.044; 95% CI 0.020, 0.069; P < 0.001), and fasting insulin (coefficient = 0.730; 95% CI 0.410, 1.050; P < 0.001) among the included participants. Moreover, in the generalized linear models, subjects with the highest copper levels demonstrated a 0.83% (95% CI 0.44%, 1.24%) greater increase in serum total cholesterol (p for trend < 0.001) when compared to participants with the lowest copper concentrations. Our results provide the first epidemiological evidence that serum copper concentrations are associated with total cholesterol concentrations in children and adolescents. However, the underlying mechanisms still need further exploration.

The metal chaperone Atox1 regulates the activity of the human copper transporter ATP7B by modulating domain dynamics.

PubMed

Yu, Corey H; Yang, Nan; Bothe, Jameson; Tonelli, Marco; Nokhrin, Sergiy; Dolgova, Natalia V; Braiterman, Lelita; Lutsenko, Svetlana; Dmitriev, Oleg Y

2017-11-03

The human transporter ATP7B delivers copper to the biosynthetic pathways and maintains copper homeostasis in the liver. Mutations in ATP7B cause the potentially fatal hepatoneurological disorder Wilson disease. The activity and intracellular localization of ATP7B are regulated by copper, but the molecular mechanism of this regulation is largely unknown. We show that the copper chaperone Atox1, which delivers copper to ATP7B, and the group of the first three metal-binding domains (MBD1-3) are central to the activity regulation of ATP7B. Atox1-Cu binding to ATP7B changes domain dynamics and interactions within the MBD1-3 group and activates ATP hydrolysis. To understand the mechanism linking Atox1-MBD interactions and enzyme activity, we have determined the MBD1-3 conformational space using small angle X-ray scattering and identified changes in MBD dynamics caused by apo -Atox1 and Atox1-Cu by solution NMR. The results show that copper transfer from Atox1 decreases domain interactions within the MBD1-3 group and increases the mobility of the individual domains. The N-terminal segment of MBD1-3 was found to interact with the nucleotide-binding domain of ATP7B, thus physically coupling the domains involved in copper binding and those involved in ATP hydrolysis. Taken together, the data suggest a regulatory mechanism in which Atox1-mediated copper transfer activates ATP7B by releasing inhibitory constraints through increased freedom of MBD1-3 motions. © 2017 by The American Society for Biochemistry and Molecular Biology, Inc.

Preparation Of Copper Indium Gallium Diselenide Films For Solar Cells

DOEpatents

Bhattacharya, Raghu N.; Contreras, Miguel A.; Keane, James; Tennant, Andrew L. , Tuttle, John R.; Ramanathan, Kannan; Noufi, Rommel

1998-08-08

High quality thin films of copper-indium-gallium-diselenide useful in the production of solar cells are prepared by electrodepositing at least one of the constituent metals onto a glass/Mo substrate, followed by physical vapor deposition of copper and selenium or indium and selenium to adjust the final stoichiometry of the thin film to approximately Cu(In,Ga)Se.sub.2. Using an AC voltage of 1-100 KHz in combination with a DC voltage for electrodeposition improves the morphology and growth rate of the deposited thin film. An electrodeposition solution comprising at least in part an organic solvent may be used in conjunction with an increased cathodic potential to increase the gallium content of the electrodeposited thin film.

Molecular and Electronic Structure of Thin Films of Protoporphyrin(IX)Fe(III)C1

DTIC Science & Technology

1991-11-10

Union Carbide). Electrical contact to the back side of the HOPG sample was made with a copper wire and conductive epoxy (Epo-tek H20E, Epoxy Technology...analysis of the contrast in STM images of copper phthalocyanine [641 and by Zheng and Tsong in their analysis of resonant tunneling via tip-localized...Electroanal. Chem. 1980, 110, 369. 71. Makinen, M.W.; Churg A.K. Iron Porphyri ns-P art One; Lever, A.B.P.; Gray, H.B., Eds.; Physical Bioinorganic

The Fate of Malathion on Copper and Iron Piping Within a Water Distribution System

DTIC Science & Technology

2015-03-26

environmental and food conditions of 50 µg cm-2 to 100 µg cm-2 and 200 µg cm-2 of soil and worms, respectively. The results were conclusive; there were...principal technique depends on the detection of molecule absorbance of infrared radiation; the absorbance of radiation is proportionate to increases... Traces of this salt or sulfide may have physically bonded to the copper. H(g) + S(s) H2S(g) (5) Where H, hydrogen gas; reacts with S

Associations of Perceived Social and Physical Environmental Supports With Physical Activity and Walking Behavior

PubMed Central

Addy, Cheryl L.; Wilson, Dawn K.; Kirtland, Karen A.; Ainsworth, Barbara E.; Sharpe, Patricia; Kimsey, Dexter

2004-01-01

We evaluated perceived social and environmental supports for physical activity and walking using multivariable modeling. Perceptions were obtained on a sample of households in a southeastern county. Respondents were classified according to physical activity levels and walking behaviors. Respondents who had good street lighting; trusted their neighbors; and used private recreational facilities, parks, playgrounds, and sports fields were more likely to be regularly active. Perceiving neighbors as being active, having access to sidewalks, and using malls were associated with regular walking. PMID:14998810

An Attenuated Total Reflectance Sensor for Copper: An Experiment for Analytical or Physical Chemistry

ERIC Educational Resources Information Center

Shtoyko, Tanya; Zudans, Imants; Seliskar, Carl J.; Heineman, William R.; Richardson, John N.

2004-01-01

A sensor experiment which can be applied to advanced undergraduate laboratory course in physical or analytical chemistry is described along with certain concepts like the demonstration of chemical sensing, preparation of thin films on a substrate, microtitration, optical determination of complex ion stoichiometry and isosbestic point. It is seen…

Quantum random number generation

DOE PAGES

Ma, Xiongfeng; Yuan, Xiao; Cao, Zhu; ...

2016-06-28

Quantum physics can be exploited to generate true random numbers, which play important roles in many applications, especially in cryptography. Genuine randomness from the measurement of a quantum system reveals the inherent nature of quantumness -- coherence, an important feature that differentiates quantum mechanics from classical physics. The generation of genuine randomness is generally considered impossible with only classical means. Based on the degree of trustworthiness on devices, quantum random number generators (QRNGs) can be grouped into three categories. The first category, practical QRNG, is built on fully trusted and calibrated devices and typically can generate randomness at a highmore » speed by properly modeling the devices. The second category is self-testing QRNG, where verifiable randomness can be generated without trusting the actual implementation. The third category, semi-self-testing QRNG, is an intermediate category which provides a tradeoff between the trustworthiness on the device and the random number generation speed.« less

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ma, Xiongfeng; Yuan, Xiao; Cao, Zhu

Quantum physics can be exploited to generate true random numbers, which play important roles in many applications, especially in cryptography. Genuine randomness from the measurement of a quantum system reveals the inherent nature of quantumness -- coherence, an important feature that differentiates quantum mechanics from classical physics. The generation of genuine randomness is generally considered impossible with only classical means. Based on the degree of trustworthiness on devices, quantum random number generators (QRNGs) can be grouped into three categories. The first category, practical QRNG, is built on fully trusted and calibrated devices and typically can generate randomness at a highmore » speed by properly modeling the devices. The second category is self-testing QRNG, where verifiable randomness can be generated without trusting the actual implementation. The third category, semi-self-testing QRNG, is an intermediate category which provides a tradeoff between the trustworthiness on the device and the random number generation speed.« less

A finite world, earth sciences, and public trust.

PubMed

Narasimhan, T N

2003-01-01

The beginning of the 21st century has coincided with our recognition that life-sustaining earth cycles are remarkably fine-tuned, and that humans have developed technological abilities to perturb these cycles. Also, inspired bythe gifts of freedom and democracy, humans have given themselves laws to exploit nature for profit. The upshot is that nature's balance, governed by immutable physical laws, is being confronted by social laws driven by human aspirations. This conflict and its implications to the human relevance of the earth sciences are explored in the context of an extraordinary tradition of European culture known as public trust.

Thrust chamber life prediction. Volume 1: Mechanical and physical properties of high performance rocket nozzle materials

NASA Technical Reports Server (NTRS)

Esposito, J. J.; Zabora, R. F.

1975-01-01

Pertinent mechanical and physical properties of six high conductivity metals were determined. The metals included Amzirc, NARloy Z, oxygen free pure copper, electroformed copper, fine silver, and electroformed nickel. Selection of these materials was based on their possible use in high performance reusable rocket nozzles. The typical room temperature properties determined for each material included tensile ultimate strength, tensile yield strength, elongation, reduction of area, modulus of elasticity, Poisson's ratio, density, specific heat, thermal conductivity, and coefficient of thermal expansion. Typical static tensile stress-strain curves, cyclic stress-strain curves, and low-cycle fatigue life curves are shown. Properties versus temperature are presented in graphical form for temperatures from 27.6K (-410 F) to 810.9K (1000 F).

The Role of E-Mentoring in Distinguishing Pedagogic Experiences of Gifted and Talented Pupils in Physical Education

ERIC Educational Resources Information Center

Lamb, Penny; Aldous, David

2014-01-01

Background: Programmes to support children identified as gifted and talented in physical education in the UK have evolved as a result of the work of the Youth Sports Trust and the Excellence in Cities (EiC) scheme. However, beyond insights regarding Gifted and Talented (G&T) Policy, there remains little understanding of the pupil experiences…

Power Efficient Hardware Architecture of SHA-1 Algorithm for Trusted Mobile Computing

NASA Astrophysics Data System (ADS)

Kim, Mooseop; Ryou, Jaecheol

The Trusted Mobile Platform (TMP) is developed and promoted by the Trusted Computing Group (TCG), which is an industry standard body to enhance the security of the mobile computing environment. The built-in SHA-1 engine in TMP is one of the most important circuit blocks and contributes the performance of the whole platform because it is used as key primitives supporting platform integrity and command authentication. Mobile platforms have very stringent limitations with respect to available power, physical circuit area, and cost. Therefore special architecture and design methods for low power SHA-1 circuit are required. In this paper, we present a novel and efficient hardware architecture of low power SHA-1 design for TMP. Our low power SHA-1 hardware can compute 512-bit data block using less than 7,000 gates and has a power consumption about 1.1 mA on a 0.25μm CMOS process.

A New Cloud Architecture of Virtual Trusted Platform Modules

NASA Astrophysics Data System (ADS)

Liu, Dongxi; Lee, Jack; Jang, Julian; Nepal, Surya; Zic, John

We propose and implement a cloud architecture of virtual Trusted Platform Modules (TPMs) to improve the usability of TPMs. In this architecture, virtual TPMs can be obtained from the TPM cloud on demand. Hence, the TPM functionality is available for applications that do not have physical TPMs in their local platforms. Moreover, the TPM cloud allows users to access their keys and data in the same virtual TPM even if they move to untrusted platforms. The TPM cloud is easy to access for applications in different languages since cloud computing delivers services in standard protocols. The functionality of the TPM cloud is demonstrated by applying it to implement the Needham-Schroeder public-key protocol for web authentications, such that the strong security provided by TPMs is integrated into high level applications. The chain of trust based on the TPM cloud is discussed and the security properties of the virtual TPMs in the cloud is analyzed.

Quantitative analysis of oxygen content in copper oxide films using ultra microbalance

NASA Astrophysics Data System (ADS)

Shu, Yonghua; Wang, Lianhong; Liu, Chong; Fan, Jing

2014-12-01

Copper oxide films were prepared on quartz substrates through electron beam physical vapor deposition in a vacuum chamber, and the films were observed using X-ray diffraction (XRD) and scanning electron microscope (SEM). The oxygen content of the films were analyzed using an ultra microbalance. Results indicated that when the substrate was heated to 600°C and the oxygen flow rate was 5 sccm, the film was composed of 47% Cu and 53% Cu2O (mass percent), and the oxidation ratio of copper was 25%. After the deposition process at the same condition, i.e. the substrate at temperature of 600°C and blowed by oxygen flowrate of 5 sccm, then in-stu annealed at 600°C in low oxygen pressure of 10 Pa for 30 minutes, the film composition became 22% Cu2O and 78% CuO (mass percent), and the oxidation ratio of copper greatly increased to about 88%.

Growth Of Single Crystalline Copper Nanowhiskers

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kolb, Matthias; Richter, Gunther

2010-11-24

Nanowhiskers are defect free single crystals with high aspect ratios and as result exhibit superior physical, e.g. mechanical properties. This paper sheds light on the kinetics of copper nanowhisker growth and thickening. Whisker growth was provoked by covering silicon wafers with a thin carbon film and subsequently coating them with copper by molecular beam epitaxy. The whiskers grown were examined by scanning electron microscopy and the length and diameter were measured as a function of the amount of copper deposited. The experiments show that nanowhisker growth follows Ruth and Hirth's growth model. A fit of the model parameters to themore » acquired data shows that adsorption of atoms on the substrate and on the whisker surface, with subsequent surface diffusion to the whisker tip, delivers by far the greatest portion of material for whisker growth. Additionally, the experiments demonstrate that the crystallographic orientation of the substrate surface greatly influences the growth rate in the early stage of whisker growth.« less

Rheological study of copper and copper grapheme feedstock for powder injection molding

NASA Astrophysics Data System (ADS)

Azaman, N. Emira Binti; Rafi Raza, M.; Muhamad, N.; Niaz Akhtar, M.; Bakar Sulong, A.

2017-01-01

Heatsink is one of the solution to optimize the performance of smart electronic devices. Copper and its composites are helping the electronic industry to solve the heating problem. Copper-graphene heat sink material with enhanced thermal conductivity is the ultimate goal.Powder injection molding (PIM) has advantages of high precision and production rate, complex shape, low cost and suitabality for metal and cremics.PIM consists of four sub sequential steps; feedstock preparation, molding, debinding and sintering. Feedstock preparation is a critical step in PIM process. Any deficiency at this stage cannot be recovered at latter stages. Therefore, this research was carried out to investigate the injectability of copper and copper graphene composite using PIM. PEG based multicomponent binder system was used and the powder loading was upto 7vol.% less than the critical powder loading was used to provide the wettability of the copper powder and graphene nanoplatelets (GNps). Corpper-graphene feedstock contained 0.5vol.% of GNps . To ensure the homogeneity of GNps within feedstock a unique technique was addopted. The microscopic results showed that the feedstock is homogeneous and ready for injection. The viscosity-shear rate relationship was determined and results showed that the addition of 0.5vol.% of GNps in copper has increased the viscosity upto 64.9% at 140˚C than that of pure copper feedstock. This attribute may be due to the large surface area of GNps. On the other hand, by increasing the temperature, viscosity of the feedstock was decreased, which was recommended for PIM. The overall viscosity and share rate lies within the range recommended for PIM process. It is clear that both feedstocks showed pseudo plastic behaviour which is suitable for PIM process. In the pseudo plastic behaviour, the viscosity decreases with the shear rate. It may be due to change in the structure of the solid particles or the binder. The molding results showed that both copper feedstocks were successfully molded and free from the physical defects.

Printed circuit board recycling: Physical processing and copper extraction by selective leaching.

PubMed

Silvas, Flávia P C; Correa, Mónica M Jiménez; Caldas, Marcos P K; de Moraes, Viviane T; Espinosa, Denise C R; Tenório, Jorge A S

2015-12-01

Global generation of waste electrical and electronic equipment (WEEE) is about 40 million tons per year. Constant increase in WEEE generation added to international legislations has improved the development of processes for materials recovery and sustainability of electrical and electronic industry. This paper describes a new hydrometallurgical route (leaching process) to recycle printed circuit boards (PCBs) from printers to recover copper. Methodology included PCBs characterization and a combined route of physical and hydrometallurgical processing. Magnetic separation, acid digestion and chemical analysis by ICP-OES were performed. On leaching process were used two stages: the first one in a sulfuric media and the second in an oxidant media. The results showed that the PCBs composition was 74.6 wt.% of non-magnetic material and 25.4 wt.% of magnetic one. The metallic fraction corresponded to 44.0 wt.%, the polymeric to 28.5 wt.% and the ceramic to 27.5 wt.%. The main metal was copper and its initial content was 32.5 wt.%. On sulfuric leaching 90 wt.% of Al, 40 wt.% of Zn and 8.6 wt.% of Sn were extracted, whereas on oxidant leaching tests the extraction percentage of Cu was 100 wt.%, of Zn 60 wt.% and of Al 10 wt.%. At the end of the hydrometallurgical processing was obtained 100% of copper extraction and the recovery factor was 98.46%, which corresponds to a 32 kg of Cu in 100 kg of PCB. Copyright © 2015 Elsevier Ltd. All rights reserved.

Demonstrating Forces between Parallel Wires.

ERIC Educational Resources Information Center

Baker, Blane

2000-01-01

Describes a physics demonstration that dramatically illustrates the mutual repulsion (attraction) between parallel conductors using insulated copper wire, wooden dowels, a high direct current power supply, electrical tape, and an overhead projector. (WRM)

Interfacial thermal resistance and thermal rectification in carbon nanotube film-copper systems.

PubMed

Duan, Zheng; Liu, Danyang; Zhang, Guang; Li, Qingwei; Liu, Changhong; Fan, Shoushan

2017-03-02

Thermal rectification occurring at interfaces is an important research area, which contains deep fundamental physics and has extensive application prospects. In general, the measurement of interfacial thermal rectification is based on measuring interfacial thermal resistance (ITR). However, ITRs measured via conventional methods cannot avoid extra thermal resistance asymmetry due to the contact between the sample and the thermometer. In this study, we employed a non-contact infrared thermal imager to monitor the temperature of super-aligned carbon nanotube (CNT) films and obtain the ITRs between the CNT films and copper. The ITRs along the CNT-copper direction and the reverse direction are in the ranges of 2.2-3.6 cm 2 K W -1 and 9.6-11.9 cm 2 K W -1 , respectively. The obvious difference in the ITRs of the two directions shows a significant thermal rectification effect, and the rectifying coefficient ranges between 0.57 and 0.68. The remarkable rectification factor is extremely promising for the manufacture of thermal transistors with a copper/CNT/copper structure and further thermal logic devices. Moreover, our method could be extended to other 2-dimensional materials, such as graphene and MoS 2 , for further explorations.

Photogrammetry for environmental monitoring: the use of drones and hydrological models for detection of soil contaminated by copper.

PubMed

Capolupo, Alessandra; Pindozzi, Stefania; Okello, Collins; Fiorentino, Nunzio; Boccia, Lorenzo

2015-05-01

Campania Region of Southern Italy has a complex environmental situation, due to geogenic and anthropogenic soil pollution. Some of the pollutants such as copper are mobilized in the organic matter. It has been shown that wetlands provide physical as well as biogeochemical barriers against pollutants. Therefore, the objective of this study was to introduce and test an innovative approach able to predict copper accumulation points at plot scales, using a combination of aerial photos, taken by drones, micro-rill network modelling and wetland prediction indices usually used at catchment scales. Data were collected from an area measuring 4500 m(2) in Trentola Ducenta locality of Caserta Province of southern Italy. The photos processing with a fifth generation software for photogrammetry resulted in a high resolution Digital Elevation Model (DEM), used to study micro-rill processes. The DEM was also used to test the ability of Topographic Index (TI) and the Clima-Topographic Index (CTI) to predict copper sedimentation points at plot scale (0.1-10 ha) by comparing the map of the predicted and the actual copper distribution in the field. The DEM obtained with a resolution of 30 mm showed a high potential for the study of micro-rill processes and TI and CTI indices were able to predict zones of copper accumulation at a plot scale. Copyright © 2015 Elsevier B.V. All rights reserved.

Effect of annealing temperature on the properties of copper oxide films prepared by dip coating technique

NASA Astrophysics Data System (ADS)

Raship, N. A.; Sahdan, M. Z.; Adriyanto, F.; Nurfazliana, M. F.; Bakri, A. S.

2017-01-01

Copper oxide films were grown on silicon substrates by sol-gel dip coating method. In order to study the effects of annealing temperature on the properties of copper oxide films, the temperature was varied from 200 °C to 450 °C. In the process of dip coating, the substrate is withdrawn from the precursor solution with uniform velocity to obtain a uniform coating before undergoing an annealing process to make the copper oxide film polycrystalline. The physical properties of the copper oxide films were measured by an X-ray diffraction (XRD), a field emission scanning electron microscope (FESEM), an atomic force microscopy (AFM) and a four point probe instrument. From the XRD results, we found that pure cuprite (Cu2O) phase can be obtained by annealing the films annealed at 200 °C. Films annealed at 300 °C had a combination phase which consists of tenorite (CuO) and cuprite (Cu2O) phase while pure tenorite (CuO) phase can be obtained at 450 °C annealing temperature. The surface microstructure showed that the grains size is increased whereas the surface roughness is increased and then decreases by increasing in annealing temperature. The films showed that the resistivity decreased with increasing annealing temperature. Consequently, it was observed that annealing temperature has strong effects on the structural, morphological and electrical properties of copper oxide films.

Delaying gratification depends on social trust

PubMed Central

Michaelson, Laura; de la Vega, Alejandro; Chatham, Christopher H.; Munakata, Yuko

2013-01-01

Delaying gratification is hard, yet predictive of important life outcomes, such as academic achievement and physical health. Prominent theories focus on the role of self-control, hypersensitivity to immediate rewards, and the cost of time spent waiting. However, delaying gratification may also require trust in people delivering future rewards as promised. To test the role of social trust, participants were presented with character vignettes and faces that varied in trustworthiness, and then choose between hypothetical smaller immediate or larger delayed rewards from those characters. Across two experiments, participants were less willing to wait for delayed rewards from less trustworthy characters, and perceived trustworthiness predicted willingness to delay gratification. These findings provide the first demonstration of a causal role for social trust in willingness to delay gratification, independent of other relevant factors, such as self-control or reward history. Thus, delaying gratification requires choosing not only a later reward, but a reward that is potentially less likely to be delivered, when there is doubt about the person promising it. Implications of this work include the need to revise prominent theories of delay of gratification, and new directions for interventions with populations characterized by impulsivity. PMID:23801977

Effect of long term organic amendments and vegetation of vineyard soils on the microscale distribution and biogeochemistry of copper.

PubMed

Navel, Aline; Martins, Jean M F

2014-01-01

In this study we evaluated the effect of the long term organic management of a vineyard-soil on the biogeochemistry of copper at the micro-aggregate scale. The model vineyard-soil (Mâcon-France) experienced a long-term field-experiment that consisted in amendments and vegetations with various materials and plants. We studied specifically the effect of Straw (S) and Conifer Compost (CC) organic amendments and Clover (Cl) and Fescue (F) vegetation on the fate of copper (fungicide) in the surface layer of this loamy soil, through a comparison with the Non Amended soil (NA). After collection the five soils were immediately physically fractionated in order to obtain 5 granulometric size-fractions. All soils and size-fractions were quantitatively characterized in terms of granulometry, chemical content and copper distribution, speciation and bioavailability to bacteria and plants. The results showed strong increases of soil-constituents aggregation for all treatments (Cl>CC>S>F>NA), in relation with the increased cementation of soil-constituents by organic matter (OM). The distribution patterns of all major elements and organic carbon were found highly variable within the soil sub-fractions and also between the 5 treatments. Due to their specific inorganic and organic composition, soil sub-fractions can thus be considered as a specific microbial habitat. Added OM accumulated preferentially in the 20-2 μm and in the >250 μm of the 5 soils. The distribution patterns of copper as well as its speciation and bioavailability to bacteria in the soil sub-fractions were shown to be strongly different among the five soils, in relation with OM distribution. Our results also suggest that Cu-bioavailability to plants is controlled by soil-rhizosphere structure. Altogether our results permitted to show that long-term organic management of a vineyard soil induced stable modifications of soil physical and chemical properties at both macro and micro-scales. These modifications affected in turn the micro-scale biogeochemistry of copper, and especially its bioavailability to bacteria and plants. © 2013.

Understanding narrative effects in physical activity promotion: the influence of breast cancer survivor testimony on exercise beliefs, self-efficacy, and intention in breast cancer patients.

PubMed

Falzon, Charlène; Radel, Rémi; Cantor, Ambre; d'Arripe-Longueville, Fabienne

2015-03-01

Research in health communication has shown that narratives contribute more positively to changing health behaviors than informational messages. The main purposes of this study were to examine and to compare the effects of two messages promoting physical activity, one narrative and the other informational, on the perceptions and behavioral intentions of cancer patients. A total of 158 women with breast cancer, undergoing chemotherapy and sedentary, were assigned to read the testimony of a breast cancer survivor who had been physically active during and after treatment (TE group), a content-equivalent message composed of expert recommendations about physical activity in breast cancer patients (RE group), or no message (control group). Source trust was higher in TE group than RE group (p < 0.001). Exercise self-efficacy and exercise intention were higher in TE group than RE and control groups (p < 0.001). However, scores in RE group were higher than those of TE group for beliefs about exercise benefits (p < 0.001) and lower than those of TE and control groups for beliefs about exercise risks (p < 0.001). Source trust, exercise self-efficacy, and beliefs about exercise benefits and risks mediated the relationship between the message and exercise intention. The results suggest that narratives may be more effective in improving perceived physical abilities and involvement in physical activity, whereas informational messages seem to be more appropriate to convey the benefits and the absence of risks related to physical activity.

A Reformulation of Nonlinear Anisotropic Elasticity for Impact Physics

DTIC Science & Technology

2014-02-01

aluminum, copper, and magnesium . 15. SUBJECT TERMS impact physics, shock compression, elasticity, plasticity 16. SECURITY CLASSIFICATION OF: 17... deformation wave propagation code accounting for dissipative inelastic mechanisms. • Accuracy of the new nonlinear elastic- plastic model(s) will be...gradient and its transpose. A new general thermomechanical theory accounting for both elastic and plastic deformations has been briefly outlined in

The effect of copper, MDA, and accelerated aging on jet fuel thermal stability as measured by the gravimetric JFTOT

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pande, S.G.; Hardy, D.R.

1995-05-01

Thermally unstable jet fuels pose operational problems. In order to adequately identify such fuels, factors that realistically impact on thermal stability were examined. Evaluation was based on a quantitative method of measuring thermal stability, viz., NRL`s recently developed gravimetric JFTOT. This method gives a quantitative measurement of both the strip deposit and filterables formed. The pertinent factors examined, included the individual and interactive effects of: soluble copper, MDA (metal deactivator), and aging. The latter was accelerated to simulate field conditions of approximately six months aging at ambient temperature and pressure. The results indicate that the individual and interactive effects ofmore » copper, MDA, and accelerated aging appear to be fuel dependent. Based on the results, the three test fuels examined (one JP-8 and two JP-5s) were categorized as exhibiting very good, typical, and poor thermal stabilities, respectively. For both the very good and poor thermal stability fuels, the effect of copper in conjunction with accelerated aging did not significantly increase the total thermal deposits of the neat fuels. In contrast, for the typical thermal stability fuel, the combined effects of copper and accelerated aging, did. Furthermore, the addition of MDA prior to aging of the copper-doped, typical stability fuel significantly counteracted the adverse effect of copper and aging. A similar beneficial effect of MDA was not observed for the poor stability fuel. These results focus on the compositional differences among fuels and the need to elucidate these differences (physical and chemical) for a better understanding and prediction of their performance.« less

A novel anti-influenza copper oxide containing respiratory face mask.

PubMed

Borkow, Gadi; Zhou, Steve S; Page, Tom; Gabbay, Jeffrey

2010-06-25

Protective respiratory face masks protect the nose and mouth of the wearer from vapor drops carrying viruses or other infectious pathogens. However, incorrect use and disposal may actually increase the risk of pathogen transmission, rather than reduce it, especially when masks are used by non-professionals such as the lay public. Copper oxide displays potent antiviral properties. A platform technology has been developed that permanently introduces copper oxide into polymeric materials, conferring them with potent biocidal properties. We demonstrate that impregnation of copper oxide into respiratory protective face masks endows them with potent biocidal properties in addition to their inherent filtration properties. Both control and copper oxide impregnated masks filtered above 99.85% of aerosolized viruses when challenged with 5.66+/-0.51 and 6.17+/-0.37 log(10)TCID(50) of human influenza A virus (H1N1) and avian influenza virus (H9N2), respectively, under simulated breathing conditions (28.3 L/min). Importantly, no infectious human influenza A viral titers were recovered from the copper oxide containing masks within 30 minutes (< or = 0.88 log(10)TCID(50)), while 4.67+/-1.35 log(10)TCID(50) were recovered from the control masks. Similarly, the infectious avian influenza titers recovered from the copper oxide containing masks were < or = 0.97+/-0.01 log(10)TCID(50) and from the control masks 5.03+/-0.54 log(10)TCID(50). The copper oxide containing masks successfully passed Bacterial Filtration Efficacy, Differential Pressure, Latex Particle Challenge, and Resistance to Penetration by Synthetic Blood tests designed to test the filtration properties of face masks in accordance with the European EN 14683:2005 and NIOSH N95 standards. Impregnation of copper oxide into respiratory protective face masks endows them with potent anti-influenza biocidal properties without altering their physical barrier properties. The use of biocidal masks may significantly reduce the risk of hand or environmental contamination, and thereby subsequent infection, due to improper handling and disposal of the masks.

Green Adeptness in the Synthesis and Stabilization of Copper Nanoparticles: Catalytic, Antibacterial, Cytotoxicity, and Antioxidant Activities

NASA Astrophysics Data System (ADS)

Din, Muhammad Imran; Arshad, Farhan; Hussain, Zaib; Mukhtar, Maria

2017-12-01

Copper nanoparticles (CuNPs) are of great interest due to their extraordinary properties such as high surface-to-volume ratio, high yield strength, ductility, hardness, flexibility, and rigidity. CuNPs show catalytic, antibacterial, antioxidant, and antifungal activities along with cytotoxicity and anticancer properties in many different applications. Many physical and chemical methods have been used to synthesize nanoparticles including laser ablation, microwave-assisted process, sol-gel, co-precipitation, pulsed wire discharge, vacuum vapor deposition, high-energy irradiation, lithography, mechanical milling, photochemical reduction, electrochemistry, electrospray synthesis, hydrothermal reaction, microemulsion, and chemical reduction. Phytosynthesis of nanoparticles has been suggested as a valuable alternative to physical and chemical methods due to low cytotoxicity, economic prospects, environment-friendly, enhanced biocompatibility, and high antioxidant and antimicrobial activities. The review explains characterization techniques, their main role, limitations, and sensitivity used in the preparation of CuNPs. An overview of techniques used in the synthesis of CuNPs, synthesis procedure, reaction parameters which affect the properties of synthesized CuNPs, and a screening analysis which is used to identify phytochemicals in different plants is presented from the recent published literature which has been reviewed and summarized. Hypothetical mechanisms of reduction of the copper ion by quercetin, stabilization of copper nanoparticles by santin, antimicrobial activity, and reduction of 4-nitrophenol with diagrammatic illustrations are given. The main purpose of this review was to summarize the data of plants used for the synthesis of CuNPs and open a new pathway for researchers to investigate those plants which have not been used in the past.

Review of Fabrication Methods, Physical Properties, and Applications of Nanostructured Copper Oxides Formed via Electrochemical Oxidation.

PubMed

Stepniowski, Wojciech J; Misiolek, Wojciech Z

2018-05-29

Typically, anodic oxidation of metals results in the formation of hexagonally arranged nanoporous or nanotubular oxide, with a specific oxidation state of the transition metal. Recently, the majority of transition metals have been anodized; however, the formation of copper oxides by electrochemical oxidation is yet unexplored and offers numerous, unique properties and applications. Nanowires formed by copper electrochemical oxidation are crystalline and composed of cuprous (CuO) or cupric oxide (Cu₂O), bringing varied physical and chemical properties to the nanostructured morphology and different band gaps: 1.44 and 2.22 eV, respectively. According to its Pourbaix (potential-pH) diagram, the passivity of copper occurs at ambient and alkaline pH. In order to grow oxide nanostructures on copper, alkaline electrolytes like NaOH and KOH are used. To date, no systemic study has yet been reported on the influence of the operating conditions, such as the type of electrolyte, its temperature, and applied potential, on the morphology of the grown nanostructures. However, the numerous reports gathered in this paper will provide a certain view on the matter. After passivation, the formed nanostructures can be also post-treated. Post-treatments employ calcinations or chemical reactions, including the chemical reduction of the grown oxides. Nanostructures made of CuO or Cu₂O have a broad range of potential applications. On one hand, with the use of surface morphology, the wetting contact angle is tuned. On the other hand, the chemical composition (pure Cu₂O) and high surface area make such materials attractive for renewable energy harvesting, including water splitting. While compared to other fabrication techniques, self-organized anodization is a facile, easy to scale-up, time-efficient approach, providing high-aspect ratio one-dimensional (1D) nanostructures. Despite these advantages, there are still numerous challenges that have to be faced, including the strict control of the chemical composition and morphology of the grown nanostructures, their uniformity, and understanding the mechanism of their growth.

25 CFR 224.139 - What must a tribe do after receiving a notice of imminent jeopardy to a physical trust asset?

Code of Federal Regulations, 2011 CFR

2011-04-01

... THE INTERIOR ENERGY AND MINERALS TRIBAL ENERGY RESOURCE AGREEMENTS UNDER THE INDIAN TRIBAL ENERGY DEVELOPMENT AND SELF DETERMINATION ACT Periodic Reviews Noncompliance § 224.139 What must a tribe do after...

Families as Partners with Disabled Youth.

ERIC Educational Resources Information Center

Roland, Christopher; And Others

1986-01-01

The involvement of the Dunham family and their physically disabled son with the Family Challenge Program (Westfield, Massachusetts) is outlined with particular attention to how the family relationships (especially between father and son) have grown closer through improved communication, cooperation, and trust, thereby creating a partnership. (JMM)

Elder Mistreatment among Chinese and Korean Immigrants: The Roles of Sociocultural Contexts on Perceptions and Help-Seeking Behaviors

PubMed Central

LEE, YEON-SHIM; KAPLAN, CELIA P.; PEREZ-STABLE, ELISEO J.

2014-01-01

The purpose of this study was to identify dimensions of elder mistreatment in Chinese and Korean immigrant communities and to increase sociocultural understanding of such mistreatment by elucidating the complexities of abuse embedded in unique social and cultural contexts. In-depth interviews were conducted with 20 local professionals working primarily in Asian elderly advocacy, and six focus group discussions were conducted involving 60 community members in the San Francisco Bay area. Five dimensions of elder mistreatment were identified: psychological abuse, neglect by a trusted person, financial exploitation, physical abuse, and sexual abuse. In general, fewer Korean community member participants reported having observed physical or financial abuse than Chinese groups, but they reported greater knowledge of situations involving psychological abuse, neglect by a trusted person, and sexual abuse. The contexts of cultural influences and immigration and acculturation were salient themes that shaped participants’ subjective perceptions and beliefs about elder abuse and hence help-seeking behaviors. PMID:24779539

Elder Mistreatment among Chinese and Korean Immigrants: The Roles of Sociocultural Contexts on Perceptions and Help-Seeking Behaviors

PubMed Central

Lee, Yeon-Shim; Kaplan, Celia P.; Perez-Stable, Eliseo J.

2014-01-01

The purpose of this study was to identify dimensions of elder mistreatment in Chinese and Korean immigrant communities and to increase sociocultural understanding of such mistreatment by elucidating the complexities of abuse embedded in unique social and cultural contexts. In-depth interviews were conducted with 20 local professionals working primarily in Asian elderly advocacy, and six focus group discussions were conducted involving 60 community members in the San Francisco Bay area. Five dimensions of elder mistreatment were identified: psychological abuse, neglect by a trusted person, financial exploitation, physical abuse, and sexual abuse. In general, fewer Korean community member participants reported having observed physical or financial abuse than Chinese groups, but they reported greater knowledge of situations involving psychological abuse, neglect by a trusted person, and sexual abuse. The contexts of cultural influences and immigration and acculturation were salient themes that shaped participants’ subjective perceptions and beliefs about elder abuse and hence help-seeking behaviors. PMID:25431530

Passive Gas-Gap Heat Switches for Use in Adiabatic Demagnetization Refrigerators

NASA Technical Reports Server (NTRS)

Shirron, P. J.; Canavan, E. R.; DiPirro, M. J.; Jackson, M.; Panek, J.; Tuttle, J. G.; Krebs, Carolyn (Technical Monitor)

2001-01-01

We have designed, built, and tested a gas gap heat switch that works passively, without the need for a separate, thermally activated getter. This switch uses He-3 condensed as a thin film on alternating plates of copper. The switch is thermally conductive at temperatures above about 0.2 K, and is insulating if either end of the switch is below about 0.15 K. The "on" conductance (7 mW/K at 0.25K) is limited by the surface area and gap between the copper leaves, the saturated vapor pressure of the He-3, and the Kapitza boundary resistance between the He-3 and the copper. The "off" conductance is determined by the helium containment shell which physically supports the two conductive ends. We have also designed and are building passive gas gap heat switches which will passively turn off near 1 K and 4 K. For these switches we rely on the rapidly changing vapor pressure of He-4 above neon or copper substrates, respectively, when the coverage is less than one monolayer. The different binding energies of the He-4 to the neon or copper give rise to the different temperatures where the switches transition between the on and off states.

Big Pile or Small Pile?

NASA Astrophysics Data System (ADS)

Branca, Mario; Quidacciolu, Rossana G.; Soletta, Isabella

2013-10-01

The construction of a voltaic pile (battery) is a simple laboratory activity that commemorates the invention of this important device and is of great help in teaching physics. The voltaic pile is often seen as a scientific toy, with the "pile" being constructed from fruit. These toys use some strips of copper and zinc inserted in a piece of fruit to produce a low-intensity electrical current to power a digital device. In a voltaic pile of this type, the zinc acts as an anode while the copper acts as a cathode. The reduction reaction [i.e.,2H+(aq)+2e⇋H2(g)] occurs on the copper (the cathode). The two electrons that are needed for the reduction are taken from the metal (copper), which remains positively charged, while the anode is the zinc, which is oxidized through the reaction Zn∘(m)⇋Zn+2(aq )+2e, and the two electrons remain on the metal, which is negatively charged. If the two pieces of metal are connected by an external conductor, electrons flow from the zinc to the copper. The electromotive force of this system is about 0.76 V, which is the reduction potential of zinc, as can be found in the table of standard reduction potentials.

Microstructural evolution and sliding wear studies of copper-alumina micro- and nano-composites fabricated by spark plasma sintering

NASA Astrophysics Data System (ADS)

Dash, Khushbu; Chaira, Debasis; Ray, Bankim Chandra

2015-05-01

Copper-alumina nanocomposites of 0.5, 1, 3, 5, 7 vol.% alumina (average size <50 nm) reinforced in copper matrix were fabricated using spark plasma sintering (SPS) technique. Another set of microcomposites containing 1, 5, 20 vol.% of alumina (average size ˜10 μm) had been fabricated to compare the physical as well as mechanical attributes of composites with variation of reinforcement particle size. These micro- and nano-composites have been characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS), transmission electron microscopy (TEM) followed by microhardness, nanoindentation hardness, and wear measurements. It has been found that hardness values are higher for nanocomposites as compared to microcomposites. It is also found that wear resistance increases with increasing alumina content. The microcomposites show better wear resistance than nanocomposites for the same composition. The interaction of copper and alumina results in the formation of CuAlO2 which manifests differential interfacial phenomenon. We have obtained 95.82% densification and 93.17 HV hardness for spark plasma sintered Cu-20 vol.% Al2O3 microcomposite. The wear rate is appreciably low, that is, 0.86×10-4 mm3N-1m-1 for 20 vol.% alumina reinforced copper microcomposite.

Composite vascular scaffold combining electrospun fibers and physically-crosslinked hydrogel with copper wire-induced grooves structure.

PubMed

Liu, Yuanyuan; Jiang, Chen; Li, Shuai; Hu, Qingxi

2016-08-01

While the field of tissue engineered vascular grafts has greatly advanced, many inadequacies still exist. Successfully developed scaffolds require mechanical and structural properties that match native vessels and optimal microenvironments that foster cell integration, adhesion and growth. We have developed a small diameter, three-layered composite vascular scaffold which consists of electrospun fibers and physically-crosslinked hydrogel with copper wire-induced grooves by combining the electrospinning and dip-coating methods. Scaffold morphology and mechanics were assessed, quantified and compared to native vessels. Scaffolds were seeded with Human Umbilical Vein Endothelial Cells (HUVECs), cultured in vitro for 3 days and were evaluated for cell viability and morphology. The results showed that composite scaffolds had adjustable mechanical strength and favorable biocompatibility, which is important in the future clinical application of Tissue-engineered vascular grafts (TEVGs). Copyright © 2016 Elsevier Ltd. All rights reserved.

Granular activated carbons from broiler manure: physical, chemical and adsorptive properties.

PubMed

Lima, Isabel M; Marshall, Wayne E

2005-04-01

Broiler manure produced at large concentrated facilities poses risks to the quality of water and public health. This study utilizes broiler litter and cake as source materials for granular activated carbon production and optimizes conditions for their production. Pelletized manure samples were pyrolyzed at 700 degrees C for 1 h followed by activation in an inert atmosphere under steam at different water flow rates, for a period ranging from 15 to 75 min. Carbon physical and adsorptive properties were dependent on activation time and quantity of steam used as activant, yields varied from 18% to 28%, surface area varied from 253 to 548 m2/g and copper ion adsorption varied from 0.13 to 1.92 mmol Cu2+/g carbon. Best overall performing carbons were steam activated for 45 min at 3 ml/min. Comparative studies with commercial carbons revealed the broiler cake-based carbon as having the highest copper ion efficiency.

Copper and cobalt accumulation in plants: a critical assessment of the current state of knowledge.

PubMed

Lange, Bastien; van der Ent, Antony; Baker, Alan John Martin; Echevarria, Guillaume; Mahy, Grégory; Malaisse, François; Meerts, Pierre; Pourret, Olivier; Verbruggen, Nathalie; Faucon, Michel-Pierre

2017-01-01

This review synthesizes contemporary understanding of copper-cobalt (Cu-Co) tolerance and accumulation in plants. Accumulation of foliar Cu and Co to > 300 μg g -1 is exceptionally rare globally, and known principally from the Copperbelt of Central Africa. Cobalt accumulation is also observed in a limited number of nickel (Ni) hyperaccumulator plants occurring on ultramafic soils around the world. None of the putative Cu or Co hyperaccumulator plants appears to comply with the fundamental principle of hyperaccumulation, as foliar Cu-Co accumulation is strongly dose-dependent. Abnormally high plant tissue Cu concentrations occur only when plants are exposed to high soil Cu with a low root to shoot translocation factor. Most Cu-tolerant plants are Excluders sensu Baker and therefore setting nominal threshold values for Cu hyperaccumulation is not informative. Abnormal accumulation of Co occurs under similar circumstances in the Copperbelt of Central Africa as well as sporadically in Ni hyperaccumulator plants on ultramafic soils; however, Co-tolerant plants behave physiologically as Indicators sensu Baker. Practical application of Cu-Co accumulator plants in phytomining is limited due to their dose-dependent accumulation characteristics, although for Co field trials may be warranted on highly Co-contaminated mineral wastes because of its relatively high metal value. © 2016 The Authors. New Phytologist © 2016 New Phytologist Trust.

A Cleaner Process for Selective Recovery of Valuable Metals from Electronic Waste of Complex Mixtures of End-of-Life Electronic Products.

PubMed

Sun, Zhi; Xiao, Y; Sietsma, J; Agterhuis, H; Yang, Y

2015-07-07

In recent years, recovery of metals from electronic waste within the European Union has become increasingly important due to potential supply risk of strategic raw material and environmental concerns. Electronic waste, especially a mixture of end-of-life electronic products from a variety of sources, is of inherently high complexity in composition, phase, and physiochemical properties. In this research, a closed-loop hydrometallurgical process was developed to recover valuable metals, i.e., copper and precious metals, from an industrially processed information and communication technology waste. A two-stage leaching design of this process was adopted in order to selectively extract copper and enrich precious metals. It was found that the recovery efficiency and extraction selectivity of copper both reached more than 95% by using ammonia-based leaching solutions. A new electrodeposition process has been proven feasible with 90% current efficiency during copper recovery, and the copper purity can reach 99.8 wt %. The residue from the first-stage leaching was screened into coarse and fine fractions. The coarse fraction was returned to be releached for further copper recovery. The fine fraction was treated in the second-stage leaching using sulfuric acid to further concentrate precious metals, which could achieve a 100% increase in their concentrations in the residue with negligible loss into the leaching solution. By a combination of different leaching steps and proper physical separation of light materials, this process can achieve closed-loop recycling of the waste with significant efficiency.

Surface investigation of naturally corroded gilded copper-based objects

NASA Astrophysics Data System (ADS)

Ingo, G. M.; Riccucci, C.; Lavorgna, M.; Salzano de Luna, M.; Pascucci, M.; Di Carlo, G.

2016-11-01

Gold and silver coated copper-based artefacts subjected to long-term natural corrosion phenomena were studied by means of the combined use of X-ray photoelectron spectroscopy (XPS), scanning electron microscopy coupled with energy dispersive X-ray spectroscopy (SEM + EDS), and optical microscopy (OM). The results allowed the identification of the chemistry and structure of the Au or Ag layers deposited by fire-gilding or mercury-silvering and the determination of the corrosion products formed due to interaction with the surrounding environment. Different degradation phenomena of the noble metal layer and copper substrate are induced by the presence of chlorine, sulphur and phosphorous and they are boosted by the metal galvanic coupling which makes gilded-metal art works unstable from a chemico-physical point of view. The SEM + EDS and OM results also suggest that particular care must be used during the removal of the encrustations and of the external corrosion products to avoid the loss of the remains of the noble layer often floating or embedded in the corrosion products. Furthermore, in order to avoid the reaction between nantokite (CuCl) and moisture the use no or low toxic inhibitors is suggested to avoid further severe degradation phenomena enhancing the long-lasting chemico-physical stability of these precious artefacts and giving them a greater chance of survival.

Metal Alloy ICF Capsules Created by Electrodeposition

DOE Office of Scientific and Technical Information (OSTI.GOV)

Horwood, Corie; Stadermann, Michael; Bunn, Thomas L.

Electrochemical deposition is an attractive alternative to physical vapor deposition and micromachining to produce metal capsules for inertial confinement fusion (ICF). Electrochemical deposition (also referred to as electrodeposition or plating) is expected to produce full-density metal capsules without seams or inclusions of unwanted atomic constituents, the current shortcomings of micromachine and physical vapor deposition, respectively. In this paper, we discuss new cathode designs that allow for the rapid electrodeposition of gold and copper alloys on spherical mandrels by making transient contact with the constantly moving spheres. Electrodeposition of pure gold, copper, platinum, and alloys of gold-copper and gold-silver are demonstrated,more » with nonporous coatings of >40 µm achieved in only a few hours of plating. The surface roughness of the spheres after electrodeposition is comparable to the starting mandrel, and the coatings appear to be fully dense with no inclusions. A detailed understanding of the electrodeposition conditions that result in different alloy compositions and plating rates will allow for the electrodeposition of graded alloys on spheres in the near future. Finally, this report on the electrodeposition of metals on spherical mandrels is an important first step toward the fabrication of graded-density metal capsules for ICF experiments at the National Ignition Facility.« less

Dependence of the critical temperature in overdoped copper oxides on superfluid density

NASA Astrophysics Data System (ADS)

Božović, I.; He, X.; Wu, J.; Bollinger, A. T.

2016-08-01

The physics of underdoped copper oxide superconductors, including the pseudogap, spin and charge ordering and their relation to superconductivity, is intensely debated. The overdoped copper oxides are perceived as simpler, with strongly correlated fermion physics evolving smoothly into the conventional Bardeen-Cooper-Schrieffer behaviour. Pioneering studies on a few overdoped samples indicated that the superfluid density was much lower than expected, but this was attributed to pair-breaking, disorder and phase separation. Here we report the way in which the magnetic penetration depth and the phase stiffness depend on temperature and doping by investigating the entire overdoped side of the La2-xSrxCuO4 phase diagram. We measured the absolute values of the magnetic penetration depth and the phase stiffness to an accuracy of one per cent in thousands of samples; the large statistics reveal clear trends and intrinsic properties. The films are homogeneous; variations in the critical superconducting temperature within a film are very small (less than one kelvin). At every level of doping the phase stiffness decreases linearly with temperature. The dependence of the zero-temperature phase stiffness on the critical superconducting temperature is generally linear, but with an offset; however, close to the origin this dependence becomes parabolic. This scaling law is incompatible with the standard Bardeen-Cooper-Schrieffer description.

Metal Alloy ICF Capsules Created by Electrodeposition

DOE PAGES

Horwood, Corie; Stadermann, Michael; Bunn, Thomas L.

2017-12-04

Electrochemical deposition is an attractive alternative to physical vapor deposition and micromachining to produce metal capsules for inertial confinement fusion (ICF). Electrochemical deposition (also referred to as electrodeposition or plating) is expected to produce full-density metal capsules without seams or inclusions of unwanted atomic constituents, the current shortcomings of micromachine and physical vapor deposition, respectively. In this paper, we discuss new cathode designs that allow for the rapid electrodeposition of gold and copper alloys on spherical mandrels by making transient contact with the constantly moving spheres. Electrodeposition of pure gold, copper, platinum, and alloys of gold-copper and gold-silver are demonstrated,more » with nonporous coatings of >40 µm achieved in only a few hours of plating. The surface roughness of the spheres after electrodeposition is comparable to the starting mandrel, and the coatings appear to be fully dense with no inclusions. A detailed understanding of the electrodeposition conditions that result in different alloy compositions and plating rates will allow for the electrodeposition of graded alloys on spheres in the near future. Finally, this report on the electrodeposition of metals on spherical mandrels is an important first step toward the fabrication of graded-density metal capsules for ICF experiments at the National Ignition Facility.« less

JPRS Report Science & Technology Europe & Latin America.

DTIC Science & Technology

1997-09-11

mixture of barium, yttrium, copper, and oxygen) was that of the Institute for Research in Non -Traditional Materials of the CNR [National Research...the necessary equipment for this kind of experimental work. The problem now is to coordinate all these branches of research which were begun...Nuclear Physics, the CNR [National Research Council] Institute for Non -Traditional Materials Technology, the physics departments of Naples and Salerno

Reconstructing Macroeconomics Based on Statistical Physics

NASA Astrophysics Data System (ADS)

Aoki, Masanao; Yoshikawa, Hiroshi

We believe that time has come to integrate the new approach based on statistical physics or econophysics into macroeconomics. Toward this goal, there must be more dialogues between physicists and economists. In this paper, we argue that there is no reason why the methods of statistical physics so successful in many fields of natural sciences cannot be usefully applied to macroeconomics that is meant to analyze the macroeconomy comprising a large number of economic agents. It is, in fact, weird to regard the macroeconomy as a homothetic enlargement of the representative micro agent. We trust the bright future of the new approach to macroeconomies based on statistical physics.

Ethical Frameworks, Moral Practices and Outdoor Education.

ERIC Educational Resources Information Center

Fox, Karen M.; Lautt, Mick

Insights from quantum physics and chaos theory help create new metaphors about ethical frameworks and moral practices in outdoor education. The seemingly straightforward concept of values is analogous to the initial simple nonlinear equation of a fractal. The value claims of outdoor education--trust, cooperation, environmental awareness,…

25 CFR 224.140 - What must the Secretary do if the tribe fails to respond to or does not comply with the Director...

Code of Federal Regulations, 2010 CFR

2010-04-01

... TRIBAL ENERGY DEVELOPMENT AND SELF DETERMINATION ACT Periodic Reviews Noncompliance § 224.140 What must... Secretary may take any actions the Secretary deems appropriate to protect the physical trust asset, which...

Prediction of Thermal Fatigue in Tooling for Die-casting Copper via Finite Element Analysis

NASA Astrophysics Data System (ADS)

Sakhuja, Amit; Brevick, Jerald R.

2004-06-01

Recent research by the Copper Development Association (CDA) has demonstrated the feasibility of die-casting electric motor rotors using copper. Electric motors using copper rotors are significantly more energy efficient relative to motors using aluminum rotors. However, one of the challenges in copper rotor die-casting is low tool life. Experiments have shown that the higher molten metal temperature of copper (1085 °C), as compared to aluminum (660 °C) accelerates the onset of thermal fatigue or heat checking in traditional H-13 tool steel. This happens primarily because the mechanical properties of H-13 tool steel decrease significantly above 650 °C. Potential approaches to mitigate the heat checking problem include: 1) identification of potential tool materials having better high temperature mechanical properties than H-13, and 2) reduction of the magnitude of cyclic thermal excursions experienced by the tooling by increasing the bulk die temperature. A preliminary assessment of alternative tool materials has led to the selection of nickel-based alloys Haynes 230 and Inconel 617 as potential candidates. These alloys were selected based on their elevated temperature physical and mechanical properties. Therefore, the overall objective of this research work was to predict the number of copper rotor die-casting cycles to the onset of heat checking (tool life) as a function of bulk die temperature (up to 650 °C) for Haynes 230 and Inconel 617 alloys. To achieve these goals, a 2D thermo-mechanical FEA was performed to evaluate strain ranges on selected die surfaces. The method of Universal Slopes (Strain Life Method) was then employed for thermal fatigue life predictions.

A Swedish interview study: parents' assessment of risks in home births.

PubMed

Lindgren, Helena; Hildingsson, Ingegerd; Rådestad, Ingela

2006-03-01

to describe home-birth risk assessment by parents. interviews using a semi-structured interview guide. Data were analysed using a phenomenological approach. independent midwifery practices in Sweden. five couples who had had planned home births. the parents had a fundamental trust that the birth would take place without complications, and they experienced meaningfulness in the event itself. Risks were considered to be part of a complex phenomenon that was not limited to births at home. This attitude seems to be part of a lifestyle that has a bearing on how risks experienced during the birth were handled. Five categories were identified as counterbalancing the risk of possible complications: (1) trust in the woman's ability to give birth; (2) trust in intuition; (3) confidence in the midwife; (4) confidence in the relationship; and (5) physical and intellectual preparation. although the parents were conscious of the risk of complications during childbirth, a fundamental trust in the woman's independent ability to give birth was central to the decision to choose a home birth. Importance was attached to the expected positive effects of having the birth at home. knowledge of parents' assessment can promote an increased understanding of how parents-to-be experience the risks associated with home birth.

Artificial Leaks in Container Closure Integrity Testing: Nonlinear Finite Element Simulation of Aperture Size Originated by a Copper Wire Sandwiched between the Stopper and the Glass Vial.

PubMed

Nieto, Alejandra; Roehl, Holger; Brown, Helen; Adler, Michael; Chalus, Pascal; Mahler, Hanns-Christian

2016-01-01

Container closure integrity (CCI) testing is required by different regulatory authorities in order to provide assurance of tightness of the container closure system against possible contamination, for example, by microorganisms. Microbial ingress CCI testing is performed by incubation of the container closure system with microorganisms under specified testing conditions. Physical CCI uses surrogate endpoints, such as coloration by dye solution ingress or gas flow (helium leakage testing). In order to correlate microbial CCI and physical CCI test methods and to evaluate the methods' capability to detect a given leak, artificial leaks are being introduced into the container closure system in a variety of different ways. In our study, artificial leaks were generated using inserted copper wires between the glass vial opening and rubber stopper. However, the insertion of copper wires introduces leaks of unknown size and shape. With nonlinear finite element simulations, the aperture size between the rubber stopper and the glass vial was calculated, depending on wire diameter and capping force. The dependency of the aperture size on the copper wire diameter was quadratic. With the data obtained, we were able to calculate the leak size and model leak shape. Our results suggest that the size as well as the shape of the artificial leaks should be taken into account when evaluating critical leak sizes, as flow rate does not, independently, correlate to hole size. Capping force also affected leak size. An increase in the capping force from 30 to 70 N resulted in a reduction of the aperture (leak size) by approximately 50% for all wire diameters. From 30 to 50 N, the reduction was approximately 33%. Container closure integrity (CCI) testing is required by different regulatory authorities in order to provide assurance of tightness of the container closure system against contamination, for example, by microorganisms. Microbial ingress CCI testing is performed by incubation of the container closure system with microorganisms under specified testing conditions. Physical CCI uses surrogate endpoints, such as coloration by dye solution ingress or gas flow. In order to correlate microbial ingress CCI and physical CCI test methods and to evaluate the methods' capability to detect a given leak, artificially created defects (artificial leaks) are being introduced into the container closure system in a variety of different ways. In our study, artificial leaks were generated using inserted copper wires between the glass vial opening and rubber stopper. Up to date, the insertion of copper wires introduced leaks of unknown size and shape. With nonlinear finite element simulations, the effective aperture size between the rubber stopper and the glass vial was calculated, depending on wire diameter and capping force, and the leak shape was modelled. Our results suggest that the size as well as the shape of the artificial leaks should be taken into account when evaluating critical leak sizes, as flow rate does not, independently, correlate to the hole size. © PDA, Inc. 2016.

Copper Indium Gallium Diselenide Cluster Tool | Photovoltaic Research |

Science.gov Websites

-mobile unit The figure shows where chambers-numbered in the list above-are physically located on the laboratory space. Samples from the CIGS cluster tool can be transported to these other tools using a mobile

Asymptotic Slavery in the Copper Oxide High Temperature Superconductors

NASA Astrophysics Data System (ADS)

Phillips, Philip

2004-05-01

Vast progress in theoretical solid state physics has been made by constructing models which mimic the low-energy properties of solids. Essential to the success of this program is the separability of the high and low energy degrees of freedom. While it is hoped that a high energy reduction can be made to solve the problem of high temperature superconductivity in the copper oxide materials, I will show that no consistent theory is possible if the high energy scale is removed. At the heart of the problem is the mixing of all energy scales (that is, UV-IR mixing) in the copper-oxide materials. Optical experiments demonstrate that the number of low-energy degrees of freedom is derived from a high energy scale. The implications of the inseparability of the high and low energy degrees of freedom on the phase diagram of the cuprates is discussed.

Alginate biopolymer as green corrosion inhibitor for copper in 1 M hydrochloric acid: Experimental and theoretical approaches

NASA Astrophysics Data System (ADS)

Jmiai, A.; El Ibrahimi, B.; Tara, A.; El Issami, S.; Jbara, O.; Bazzi, L.

2018-04-01

The anti-corrosion behavior of sodium alginate (SA) on copper in the 1 M hydrochloric medium was carried out using weight loss and electrochemical measurements. The obtained results show that the inhibition increases with SA concentration and then reaches a maximum of 83% at a concentration of 0.1 mg L-1. The effect of temperature on the reactions of copper corrosion inhibition and analyzing the thermodynamic parameters revealed that the mode of adsorption has a physical nature and obeys the Langmuir isotherm. The surface morphology was performed by scanning electron microscopy coupled with energy dispersive X-ray spectrometry and atomic force microscopy. To better understand the adsorption mechanism, describing the relationship between inhibitory ability and the molecular structure of SA, quantum calculations using density functional theory were performed. Monte Carlo simulation approache was performed to know well of the relationship between the inhibition ability and molecular structure of alginate.

The development of Zirconia and Copper toughened Alumina ceramic insert

NASA Astrophysics Data System (ADS)

Amalina Sabuan, Nur; Zolkafli, Nurfatini; Mebrahitom, A.; Azhari, Azmir; Mamat, Othman

2018-04-01

Ceramic cutting tools have been utilized in industry for over a century for its productivity and efficiency in machine tools and cutting tool material. However, due to the brittleness property the application has been limited. In order to manufacture high strength ceramic cutting tools, there is a need for suitable reinforcement to improve its toughness. In this case, copper (Cu) and zirconia (ZrO2) powders were added to investigate the hardness and physical properties of the developed composite insert. A uniaxial pre-forming process of the mix powder was done prior to densification by sintering at 1000 and 1300°C. The effect of the composition of the reinforcement on the hardness, density, shrinkage and microstructure of the inserts was investigated. It was found that an optimum density of 3.26 % and hardness 1385HV was obtained for composite of 10wt % zirconia and 10wt% copper at temperature 1000 °C.

Columnar to nematic mesophase transition in mixtures of rhodium or copper soaps with hydrocarbon solvents

NASA Astrophysics Data System (ADS)

Ibn-Elhaj, M.; Guillon, D.; Skoulios, A.; Giroud-Godquin, A. M.; Marchon, J.-C.

1992-12-01

This paper describes observations of the mesomorphic behaviour of mixtures of rhodium eicosanoate or copper dodecanoate with solvents such as toluene, decahydronaphthalene, and (+) camphene. The mesophase found with these compounds at high temperatures turns from columnar to nematic when the weight fraction of the solvent (toluene, decahydronaphthalene is increased beyond a value of about 50%. The binary phase diagram of the copper compound with toluene was experimentally determined using polarizing optical microscopy, differential scanning calorimetry and X-ray diffraction. The novel feature of the nematic phase is that the basic physical object which align parallel to the nematic director are not individual molecules, but columns of molecules (one-dimensional supramolecular assemblies) which have lost the long-range lateral positional order characteristic of the columnar mesophase. These observations are discussed on the grounds of recent theoretical calculations. Cholesteric-like textures are observed for mixtures of rhodium eicosanoate with the chiral solvent (+) camphene.

Effect of copper doping sol-gel ZnO thin films: physical properties and sensitivity to ethanol vapor

NASA Astrophysics Data System (ADS)

Boukaous, Chahra; Benhaoua, Boubaker; Telia, Azzedine; Ghanem, Salah

2017-10-01

In the present paper, the effect of copper doping ZnO thin films, deposited using a sol-gel dip-coating technique, on the structural, optical and ethanol vapor-sensing properties, was investigated. The range of the doping content is 0 wt. %-5 wt. % Cu/Zn and the films’ properties were studied using x-ray diffraction, scanning electron microscopy and a UV-vis spectrophotometer. The obtained results indicated that undoped and copper-doped zinc oxide thin films have polycrystalline wurtzite structure with (1 0 1) preferred orientation. All samples have a smooth and dense structure free of pinholes. A decrease in the band gap with Cu concentration in the ZnO network was observed. The influence of the dopant on ethanol vapor-sensing properties shows an increase in the film sensitivity to the ethanol vapor within the Cu concentration.

78 FR 69737 - Self-Regulatory Organizations; Chicago Board Options Exchange, Incorporated; Notice of Filing and...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-20

... SECURITIES AND EXCHANGE COMMISSION [Release No. 34-70878; File No. SR-CBOE-2013-106] Self-Regulatory Organizations; Chicago Board Options Exchange, Incorporated; Notice of Filing and Immediate... Position and Exercise Limits for Physically-Settled SPDR S&P 500 ETF Trust (``SPY'') Options November 14...

Construction of Trust Judgments within Cooperative Dyads

ERIC Educational Resources Information Center

Evin, Agathe; Sève, Carole; Saury, Jacques

2014-01-01

Introduction: One of the aims of physical education (PE) is to develop social skills such as cooperation, teamwork, and mutual helping among students. Cooperation is a broad research topic, implicating several disciplines in the human sciences (e.g. psychology, sociology, linguistics, philosophy). It is also an important topic in various domains…

Social capital dynamics and health in mid to later life: findings from Australia.

PubMed

Yiengprugsawan, Vasoontara; Welsh, Jennifer; Kendig, Hal

2018-05-01

The influence of social capital has been shown to improve health and wellbeing. This study investigates the relationship between changes in social capital and health outcomes during a 6-year follow-up in mid to later life in Australia. Nationally representative data from the Household, Income and Labour Dynamics in Australia (HILDA) survey included participants aged 45 years and over who responded in 2006, 2010 and 2012 (N = 3606). Each of the three components of social capital (connectedness, trust and participation) was measured in Waves 2006 and 2010 and categorised as: 'never low', 'transitioned to low', 'transitioned out of low' and 'consistently low'. Health outcomes in 2012 included self-rated overall health, physical functioning, and mental health based on the Short Form 36-item health survey (SF-36). Multivariable logistic regression assessed changes in social capital (measured in 2006 and 2010) predicted poor health (measured in 2012), adjusting for covariates. Consistently low trust was significantly associated with higher odds of transitions into poor physical functioning (AOR 1.54; 95% Confidence Interval 1.06-1.22), poor mental health (AOR 1.59; 95% CI 1.08-2.36) and poor self-rated health (AOR 1.86; 95% CI 1.27-2.72). Transition into low trust was also a predictor of poor self-rated health after adjusting for covariates (AOR 1.74; 95% CI 1.11-2.73). Changes in social connectedness in both directions (transitioned out of and into low) were statistically associated with poor self-rated health (AORs 1.40; 95% CI 1.00-1.97 and 1.61; 95% CI 1.11-2.34, respectively) after adjusting for confounders as well as other social capital components. Our longitudinal findings reveal social capital dynamics and effects on health in mid to later life. Social trust and connectedness could be important enablers for older persons to be more active in the community and potentially benefit their health and wellbeing over time.

A Novel Anti-Influenza Copper Oxide Containing Respiratory Face Mask

PubMed Central

Borkow, Gadi; Zhou, Steve S.; Page, Tom; Gabbay, Jeffrey

2010-01-01

Background Protective respiratory face masks protect the nose and mouth of the wearer from vapor drops carrying viruses or other infectious pathogens. However, incorrect use and disposal may actually increase the risk of pathogen transmission, rather than reduce it, especially when masks are used by non-professionals such as the lay public. Copper oxide displays potent antiviral properties. A platform technology has been developed that permanently introduces copper oxide into polymeric materials, conferring them with potent biocidal properties. Methodology/Principal Findings We demonstrate that impregnation of copper oxide into respiratory protective face masks endows them with potent biocidal properties in addition to their inherent filtration properties. Both control and copper oxide impregnated masks filtered above 99.85% of aerosolized viruses when challenged with 5.66±0.51 and 6.17±0.37 log10TCID50 of human influenza A virus (H1N1) and avian influenza virus (H9N2), respectively, under simulated breathing conditions (28.3 L/min). Importantly, no infectious human influenza A viral titers were recovered from the copper oxide containing masks within 30 minutes (≤0.88 log10TCID50), while 4.67±1.35 log10TCID50 were recovered from the control masks. Similarly, the infectious avian influenza titers recovered from the copper oxide containing masks were ≤0.97±0.01 log10TCID50 and from the control masks 5.03±0.54 log10TCID50. The copper oxide containing masks successfully passed Bacterial Filtration Efficacy, Differential Pressure, Latex Particle Challenge, and Resistance to Penetration by Synthetic Blood tests designed to test the filtration properties of face masks in accordance with the European EN 14683:2005 and NIOSH N95 standards. Conclusions/Significance Impregnation of copper oxide into respiratory protective face masks endows them with potent anti-influenza biocidal properties without altering their physical barrier properties. The use of biocidal masks may significantly reduce the risk of hand or environmental contamination, and thereby subsequent infection, due to improper handling and disposal of the masks. PMID:20592763

Coteaching in physical education: a strategy for inclusive practice.

PubMed

Grenier, Michelle A

2011-04-01

Qualitative research methods were used to explore the factors that informed general and adapted physical education teachers' coteaching practices within an inclusive high school physical education program. Two physical education teachers and one adapted physical education teacher were observed over a 16-week period. Interviews, field notes, and documents were collected and a constant comparative approach was used in the analysis that adopted a social model framework. Primary themes included community as the cornerstone for student learning, core values of trust and respect, and creating a natural support structure. Coteaching practices existed because of the shared values of teaching, learning, and the belief that all students should be included. Recommendations include shifting orientations within professional preparation programs to account for the social model of disability.

Comprehensive Soldier Fitness: Building Resilience in the U.S. Army

DTIC Science & Technology

2011-01-24

Physical Exercise  Meditation, Yoga  Active Problem Solving  Talking to trusted friend, Chaplain, family member Maladaptive, Immature, Undesirable...Disorderly 6 25 19 29 E1-E2 (4 of 6) Suicide Gesture 5 27 19 34 E1-E3 (All) Possession of Alcohol in POV 4 20 19 21 E1 (2 of 4) possession of child porn 2 21...Adaptive, Mature, Resilient, Motivated Comprehensive Fitness includes Spiritual, Family , Emotional, and Social, as well as Physical Components

Electrical injuries due to theft of copper.

PubMed

Curinga, Giuseppe; Pietramaggiori, Giorgio; Scherer, Sandra Saja; Masellis, Alessandro; Gherardini, Giulio; Brancato, Renato; Conte, Francesco; Bistoni, Giovanni

2010-01-01

This study shows that the theft of copper, mainly from electrical wires, is becoming a more frequent crime as the value of this metal rises. We have collected all the data from the Burn Centre of the Hospital of Palermo, Italy, from 1992 to 2007. Over the last two decades, we assisted to a dramatic increase of patients admitted to our hospital, reporting burn injuries while attempting to steal it in dangerous conditions. The circumstances of the injury, the clinical management of the case, and the long-term consequences are presented and discussed. We found that the electrical burn related to the theft of copper is often a life-threatening event because of the high-voltage electrical current passing through the patients. Patients, due to the type of activity, often requiring physical effort, were generally young and healthy. From a review of the literature on the subject, we have noticed that theft of copper is not reported as an important risk factor for electrical burns. Our report clearly shows that theft of copper-related electrical injury is becoming more frequent in the community and should be added as a "new" risk factor. The already high incidence reported here may actually be lower than the actual incidence because many patients tend not to come to the hospital because of the risk of being prosecuted by the police.

Post examination of copper ER sensors exposed to bentonite

NASA Astrophysics Data System (ADS)

Kosec, Tadeja; Kranjc, Andrej; Rosborg, Bo; Legat, Andraž

2015-04-01

Copper corrosion in saline solutions under oxic conditions is one of concerns for the early periods of disposal of spent nuclear fuel in deep geological repositories. The main aim of the study was to investigate the corrosion behaviour of copper during this oxic period. The corrosion rate of pure copper was measured by means of thin electrical resistance (ER) sensors that were placed in a test package containing an oxic bentonite/saline groundwater environment at room temperature for a period of four years. Additionally, the corrosion rate was monitored by electrochemical impedance spectroscopy (EIS) measurements that were performed on the same ER sensors. By the end of the exposure period the corrosion rate, as estimated by both methods, had dropped to approximately 1.0 μm/year. The corrosion rate was also estimated by the examination of metallographic cross sections. The post examination tests which were used to determine the type and extent of corrosion products included different spectroscopic techniques (XRD and Raman analysis). It was confirmed that the corrosion rate obtained by means of physical (ER) and electrochemical techniques (EIS) was consistent with that estimated from the metallographic cross section analysis. The corrosion products consisted of cuprous oxide and paratacamite, which was very abundant. From the types of attack it can be concluded that the investigated samples of copper in bentonite underwent uneven general corrosion.

The evolution of machining-induced surface of single-crystal FCC copper via nanoindentation

NASA Astrophysics Data System (ADS)

Zhang, Lin; Huang, Hu; Zhao, Hongwei; Ma, Zhichao; Yang, Yihan; Hu, Xiaoli

2013-05-01

The physical properties of the machining-induced new surface depend on the performance of the initial defect surface and deformed layer in the subsurface of the bulk material. In this paper, three-dimensional molecular dynamics simulations of nanoindentation are preformed on the single-point diamond turning surface of single-crystal copper comparing with that of pristine single-crystal face-centered cubic copper. The simulation results indicate that the nucleation of dislocations in the nanoindentation test on the machining-induced surface and pristine single-crystal copper is different. The dislocation embryos are gradually developed from the sites of homogeneous random nucleation around the indenter in the pristine single-crystal specimen, while the dislocation embryos derived from the vacancy-related defects are distributed in the damage layer of the subsurface beneath the machining-induced surface. The results show that the hardness of the machining-induced surface is softer than that of pristine single-crystal copper. Then, the nanocutting simulations are performed along different crystal orientations on the same crystal surface. It is shown that the crystal orientation directly influences the dislocation formation and distribution of the machining-induced surface. The crystal orientation of nanocutting is further verified to affect both residual defect generations and their propagation directions which are important in assessing the change of mechanical properties, such as hardness and Young's modulus, after nanocutting process.

Social capital and health in China: exploring the mediating role of lifestyle.

PubMed

Xue, Xindong; Cheng, Mingmei

2017-11-06

Although social capital as a key determinant of health has been well established in various studies, little is known about how lifestyle factors mediate this relationship. Understanding the cross-relationships between social capital, health, and lifestyle factors is important if health promotion policies are to be effective. The purpose of this study is to explore whether different dimensions of social capital and lifestyle factors are related, and whether lifestyle factors mediate the association between social capital and self-rated health (SRH) and psychological well-being (PWB) in China. This study used nationally representative data from the 2014 China Family Panel Studies (n = 28,916). The data reported on three dimensions of individual-level social capital: social trust, social relationship and Chinese Communist Party (CCP) membership. Health was assessed using SRH and PWB. Five lifestyle indicators were recorded: healthy diet, physical activity, smoking, sleeping, and non-overweight status. Logistic regression was used to examine the associations between social capital and lifestyle factors, and whether there was a mediating role of lifestyle. Odds ratios relating health status to social capital were reported before and after adjustment for lifestyle factors. Mediation analysis was then used to calculate the total, direct and indirect effects of social capital on SRH and PWB. The results show that social trust was significantly associated with all five lifestyle factors. Social relationship was significantly associated with four of the five: healthy diet, physical activity, sleeping and non-overweight. CCP membership was only significantly associated with two lifestyle factors: physical activity and non-overweight. Social trust and social relationship were significantly related to both SRH and PWB. CCP membership was only significantly related to SRH. Mediation analysis found modest evidence that lifestyle factors influenced the relationship between all three types of social capital and SRH. In contrast, only social trust and social relationship, but not CCP membership, were mediated by lifestyle factors with respect to PWB. This study is the first to explore the mediating role of lifestyle factors in the relationship between social capital and health in China. The overall findings suggest that lifestyle factors modestly mediate the association between social capital and health. The degree of mediating effect varies across different dimensions of social capital. Social capital-based health promotion policies would benefit from taking lifestyle factors into account.

Fe(II)/Cu(II) interaction on goethite stimulated by an iron-reducing bacteria Aeromonas Hydrophila HS01 under anaerobic conditions.

PubMed

Tao, Liang; Zhu, Zhen-Ke; Li, Fang-Bai; Wang, Shan-Li

2017-11-01

Copper is a trace element essential for living creatures, but copper content in soil should be controlled, as it is toxic. The physical-chemical-biological features of Cu in soil have a significant correlation with the Fe(II)/Cu(II) interaction in soil. Of significant interest to the current study is the effect of Fe(II)/Cu(II) interaction conducted on goethite under anaerobic conditions stimulated by HS01 (a dissimilatory iron reduction (DIR) microbial). The following four treatments were designed: HS01 with α-FeOOH and Cu(II) (T1), HS01 with α-FeOOH (T2), HS01 with Cu(II) (T3), and α-FeOOH with Cu(II) (T4). HS01 presents a negligible impact on copper species transformation (T3), whereas the presence of α-FeOOH significantly enhanced copper aging contributing to the DIR effect (T1). Moreover, the violent reaction between adsorbed Fe(II) and Cu(II) leads to the decreased concentration of the active Fe(II) species (T1), further inhibiting reactions between Fe(II) and iron (hydr)oxides and decelerating the phase transformation of iron (hydr)oxides (T1). From this study, the effects of the Fe(II)/Cu(II) interaction on goethite under anaerobic conditions by HS01 are presented in three aspects: (1) the accelerating effect of copper aging, (2) the reductive transformation of copper, and (3) the inhibition effect of the phase transformation of iron (hydr)oxides. Copyright © 2017 Elsevier Ltd. All rights reserved.

Understanding experiences of and preferences for service user and carer involvement in physical health care discussions within mental health care planning.

PubMed

Small, Nicola; Brooks, Helen; Grundy, Andrew; Pedley, Rebecca; Gibbons, Chris; Lovell, Karina; Bee, Penny

2017-04-13

People with severe mental illness suffer more physical comorbidity than the general population, which can require a tailored approach to physical health care discussions within mental health care planning. Although evidence pertaining to service user and carer involvement in mental health care planning is accumulating, current understanding of how physical health is prioritised within this framework is limited. Understanding stakeholder experiences of physical health discussions within mental health care planning, and the key domains that underpin this phenomena is essential to improve quality of care. Our study aimed to explore service user, carer and professional experiences of and preferences for service user and carer involvement in physical health discussions within mental health care planning, and develop a conceptual framework of effective user-led involvement in this aspect of service provision. Six focus groups and four telephone interviews were carried out with twelve service users, nine carers, three service users with a dual service user and carer role, and ten mental health professionals recruited from one mental health Trust in the United Kingdom. Data was analysed utilising a thematic approach, analysed separately for each stakeholder group, and combined to aid comparisons. No service users or carers recalled being explicitly involved in physical health discussions within mental health care planning. Six prerequisites for effective service user and carer involvement in physical care planning were identified. Three themes confirmed general mental health care planning requirements: tailoring a collaborative working relationship, maintaining a trusting relationship with a professional, and having access to and being able to edit a living document. Three themes were novel to feeling involved in physical health care planning discussions: valuing physical health equally with mental health; experiencing coordination of care between physical-mental health professionals, and having a physical health discussion that is personalised. High quality physical health care discussions within the care planning process demands action at multiple levels. A conceptual framework is presented which provides an evidence-based foundation for service level improvement. Further work is necessary to develop a new patient reported outcome measure to enable meaningful quantification of health care quality and patient experience.

Two Decades into the LCR: What We Do and Still Don’t Know to Solve Lead Problems

EPA Science Inventory

Site selection and sampling protocol biases in LCR samplingunderestimate peak lead and copper concentrations whilemissing erratic lead release episodes resulting from distributionsystem chemical and physical disturbances. Possible sitetargeting and sampling protocol changes could...

Two Decades into the LCR: What We Do and Still Don’t Know to Solve Lead Problems - abstract

EPA Science Inventory

Site selection and sampling protocol biases in LCR samplingunderestimate peak lead and copper concentrations whilemissing erratic lead release episodes resulting from distributionsystem chemical and physical disturbances. Possible sitetargeting and sampling protocol changes could...

Real-time control data wrangling for development of mathematical control models of technological processes

NASA Astrophysics Data System (ADS)

Vasilyeva, N. V.; Koteleva, N. I.; Fedorova, E. R.

2018-05-01

The relevance of the research is due to the need to stabilize the composition of the melting products of copper-nickel sulfide raw materials in the Vanyukov furnace. The goal of this research is to identify the most suitable methods for the aggregation of the real time data for the development of a mathematical model for control of the technological process of melting copper-nickel sulfide raw materials in the Vanyukov furnace. Statistical methods of analyzing the historical data of the real technological object and the correlation analysis of process parameters are described. Factors that exert the greatest influence on the main output parameter (copper content in matte) and ensure the physical-chemical transformations are revealed. An approach to the processing of the real time data for the development of a mathematical model for control of the melting process is proposed. The stages of processing the real time information are considered. The adopted methodology for the aggregation of data suitable for the development of a control model for the technological process of melting copper-nickel sulfide raw materials in the Vanyukov furnace allows us to interpret the obtained results for their further practical application.

"Bulk" Nanocrystalline Metals: Review of the Current State of the Art and Future Opportunities for Copper and Copper Alloys

NASA Astrophysics Data System (ADS)

Tschopp, M. A.; Murdoch, H. A.; Kecskes, L. J.; Darling, K. A.

2014-06-01

It is a new beginning for innovative fundamental and applied science in nanocrystalline materials. Many of the processing and consolidation challenges that have haunted nanocrystalline materials are now more fully understood, opening the doors for bulk nanocrystalline materials and parts to be produced. While challenges remain, recent advances in experimental, computational, and theoretical capability have allowed for bulk specimens that have heretofore been pursued only on a limited basis. This article discusses the methodology for synthesis and consolidation of bulk nanocrystalline materials using mechanical alloying, the alloy development and synthesis process for stabilizing these materials at elevated temperatures, and the physical and mechanical properties of nanocrystalline materials with a focus throughout on nanocrystalline copper and a nanocrystalline Cu-Ta system, consolidated via equal channel angular extrusion, with properties rivaling that of nanocrystalline pure Ta. Moreover, modeling and simulation approaches as well as experimental results for grain growth, grain boundary processes, and deformation mechanisms in nanocrystalline copper are briefly reviewed and discussed. Integrating experiments and computational materials science for synthesizing bulk nanocrystalline materials can bring about the next generation of ultrahigh strength materials for defense and energy applications.

Anticancer activity of silver and copper embedded chitin nanocomposites against human breast cancer (MCF-7) cells.

PubMed

Solairaj, Dhanasekaran; Rameshthangam, Palanivel; Arunachalam, Gnanapragasam

2017-12-01

Chitin is a natural biopolymer widely used in biomedical and environmental applications due to its distinctive physical, chemical and mechanical properties. Although the anticancer property of chitin nanoforms and chitin derivatives against various cancers were studied earlier, there is no report in the chitin nanostructure incorporated metal nanocomposite. The present study was aimed to investigate the cytotoxicity of chitin incorporated silver and copper nanocomposite against human breast cancer (MCF-7) cells. Cytotoxicity of chitin nanoparticles (CNP), silver nanoparticles (AgNP), copper nanoparticles (CuNP), chitin/silver nanocomposite (CNP/AgNP) and chitin/copper nanocomposite (CNP/CuNP) was evaluated. Among all the above, CNP/AgNP has shown a lower of 31 mg as inhibitory concentration (IC 50 ) value. Our study further showed the increased generation of reactive oxygen species with decreased activity of antioxidant enzymes and damage in the membrane integrity, thus confirms the cellular cytotoxic action of CNP/AgNP. In conclusion, the present study validates that, incorporating chitin nanoparticles with metallic nanostructure could be an effective and promising therapeutic agent against breast cancer. Copyright © 2017 Elsevier B.V. All rights reserved.

Characterization of commercially cold sprayed copper coatings and determination of the effects of impacting copper powder velocities

NASA Astrophysics Data System (ADS)

Jakupi, P.; Keech, P. G.; Barker, I.; Ramamurthy, S.; Jacklin, R. L.; Shoesmith, D. W.; Moser, D. E.

2015-11-01

Copper coated steel containers are being developed for the disposal of high level nuclear waste using processes such as cold spray and electrodeposition. Electron Back-Scatter Diffraction has been used to determine the microstructural properties and the quality of the steel-copper coating interface. The influence of the nature of the cold-spray carrier gas as well as its temperature and pressure (velocity) on the coating's plastic strain and recrystallization behaviour have been investigated, and one commercially-produced electrodeposited coating characterized. The quality of the coatings was assessed using the coincident site lattice model to analyse the properties of the grain boundaries. For cold spray coatings the grain size and number of coincident site lattice grain boundaries increased, and plastic strain decreased, with carrier gas velocity. In all cases annealing improved the quality of the coatings by increasing texture and coincidence site-lattices, but also increased the number of physical voids, especially when a low temperature cold spray carrier gas was used. Comparatively, the average grain size and number of coincident site-lattices was considerably larger for the strongly textured electrodeposited coating. Tensile testing showed the electrodeposited coating was much more strongly adherent to the steel substrate.

A three-dimensional thermal finite element analysis of AISI 304 stainless steel and copper dissimilar weldment

NASA Astrophysics Data System (ADS)

Singh, Gurdeep; Saxena, Ravindra K.; Pandey, Sunil

2018-04-01

The aim of this study to developed a 3-D thermal finite element model for dissimilar material welding of AISI-304 stainless steel and copper. Welding of similar material is widely studied using experimental and numerical methods but the problem becomes trivial for the welding of dissimilar materials especially in ferrous and nonferrous materials. Finite element analysis of dissimilar material welding is a cost-effective method for the understanding and analysis of the process. The finite element analysis has been performed to predict the heat affected zone and temperature distribution in AISI-304 stainless steel and copper dissimilar weldment using MSC Marc 2017®. Due to the difference in physical properties of these materials the behavior of heat affected zone and temperature distribution are perceived to be different. To verify the accuracy of the thermal finite element model, the welding process was simulated with butt-welded joints having same dimensions and parameters from Attarha and Far [1]. It is found from the study that the heat affected zone is larger in copper weld pads than in AISI 304 stainless steel due to large difference in thermal conductivity of these two weld pads.

Blasted copper slag as fine aggregate in Portland cement concrete.

PubMed

Dos Anjos, M A G; Sales, A T C; Andrade, N

2017-07-01

The present work focuses on assessing the viability of applying blasted copper slag, produced during abrasive blasting, as fine aggregate for Portland cement concrete manufacturing, resulting in an alternative and safe disposal method. Leaching assays showed no toxicity for this material. Concrete mixtures were produced, with high aggregate replacement ratios, varying from 0% to 100%. Axial compressive strength, diametrical compressive strength, elastic modulus, physical indexes and durability were evaluated. Assays showed a significant improvement in workability, with the increase in substitution of fine aggregate. With 80% of replacement, the concrete presented lower levels of water absorption capacity. Axial compressive strength and diametrical compressive strength decreased, with the increase of residue replacement content. The greatest reductions of compressive strength were found when the replacement was over 40%. For tensile strength by diametrical compression, the greatest reduction occurred for the concrete with 80% of replacement. After the accelerated aging, results of mechanic properties showed a small reduction of the concrete with blasted copper slag performance, when compared with the reference mixture. Results indicated that the blasted copper slag is a technically viable material for application as fine aggregate for concrete mixtures. Copyright © 2017 Elsevier Ltd. All rights reserved.

Physical activity promotion for people with spinal cord injury: physiotherapists' beliefs and actions.

PubMed

Williams, Toni L; Smith, Brett; Papathomas, Anthony

2018-01-01

It is vital that people with spinal cord injury (SCI) lead a physically active lifestyle to promote long term health and well-being. Yet within rehabilitation and upon discharge into the community, people with SCI are largely inactive. Physiotherapists are well placed to promote a physically active lifestyle and are valued and trusted messengers of physical activity (PA) by people with SCI. Therefore this study aimed to explore the perceptions of physiotherapists in SCI rehabilitation on PA for people with SCI, and what is done to promote PA. Semi-structured interviews were completed with 18 neurological physiotherapists (2-22 years experience) from SCI centres in the United Kingdom and Ireland. Framed by interpretivism, an inductive thematic analysis was conducted. Three themes were identified: (1) perceived importance of PA; (2) inconsistent PA promotion efforts; and (3) concern regarding community PA. This article makes a significant contribution to the literature by identifying that although physiotherapists value PA, active promotion of PA remains largely absent from their practice. To enable physiotherapists to promote and prescribe PA as a structured and integral component of their practice, effective knowledge strategies need designing and implementing at the macro, meso, and micro levels of healthcare. Implications for Rehabilitation Physiotherapists are well placed to promote a physically active lifestyle and are perceived as valued and trusted messengers of physical activity (PA). The importance of PA for patients with spinal cord injury (SCI) is valued by physiotherapists yet PA promotion is largely absent from their practice. Physiotherapists lack specific education and training on PA and SCI and hold certain beliefs which restrict their promotion of PA. Knowledge translation across the macro, meso, and micro levels of healthcare are essential to facilitate effective PA promotion.

[A young boy with elevated aminotransferases in physical examination--Two novel missense mutations associated with Wilson's disease were found].

PubMed

Zhu, Yu; Deng, Si-Yan; Wan, Chao-Min

2015-07-01

A 3-year-old boy had abnormal liver function, which was found in physical examination, for 5 months before admission. He had no symptoms such as anorexia, poor appetite, and jaundice, had normal growth and development, and showed no hepatosplenomegaly. Laboratory examination revealed significantly reduced ceruloplasmin (35 mg/L), as well as negative hepatotropic virus, cytomegalovirus, and Epstein-Barr virus. There were normal muscle enzymes, blood glucose, and blood ammonia and negative liver-specific autoantibodies. The boy had negative K-F ring and normal 24-hour urine copper (0.56 μmol/L). The ATP7B gene testing for the boy, his sister, and their parents detected two novel missense mutations in the boy and his sister, i.e., compound heterozygous mutations in exon 7 (c.2075T>C, p.L692P) and exon 13 (c.3044T>C, p.L1015P), which were inherited from their father and mother, respectively. Wilson's disease was confirmed by genetic diagnosis in the boy and his sister. The boy and his sister were given a low-copper diet. The boy was administered with penicillamine for decoppering and zinc supplement against copper uptake. His sister received zinc supplement alone because no clinical symptoms were observed. The boy showed normal liver function in the reexamination after 3 months of treatment.

The fabrication of a double-layer atom chip with through silicon vias for an ultra-high-vacuum cell

NASA Astrophysics Data System (ADS)

Chuang, Ho-Chiao; Lin, Yun-Siang; Lin, Yu-Hsin; Huang, Chi-Sheng

2014-04-01

This study presents a double-layer atom chip that provides users with increased diversity in the design of the wire patterns and flexibility in the design of the magnetic field. It is more convenient for use in atomic physics experiments. A negative photoresist, SU-8, was used as the insulating layer between the upper and bottom copper wires. The electrical measurement results show that the upper and bottom wires with a width of 100 µm can sustain a 6 A current without burnout. Another focus of this study is the double-layer atom chips integrated with the through silicon via (TSV) technique, and anodically bonded to a Pyrex glass cell, which makes it a desired vacuum chamber for atomic physics experiments. Thus, the bonded glass cell not only significantly reduces the overall size of the ultra-high-vacuum (UHV) chamber but also conducts the high current from the backside to the front side of the atom chip via the TSV under UHV (9.5 × 10-10 Torr). The TSVs with a diameter of 70 µm were etched through by the inductively coupled plasma ion etching and filled by the bottom-up copper electroplating method. During the anodic bonding process, the electroplated copper wires and TSVs on atom chips also need to pass the examination of the required bonding temperature of 250 °C, under an applied voltage of 1000 V. Finally, the UHV test of the double-layer atom chips with TSVs at room temperature can be reached at 9.5 × 10-10 Torr, thus satisfying the requirements of atomic physics experiments under an UHV environment.

25 CFR 224.151 - When may the Secretary reassume activities?

Code of Federal Regulations, 2010 CFR

2010-04-01

... Reassumption § 224.151 When may the Secretary reassume activities? Upon issuing a written finding of imminent jeopardy to a physical trust asset, the Secretary may reassume activities under a TERA in accordance with... 25 Indians 1 2010-04-01 2010-04-01 false When may the Secretary reassume activities? 224.151...

25 CFR 224.135 - Under what circumstances may the Director conduct additional reviews and evaluations?

Code of Federal Regulations, 2010 CFR

2010-04-01

... harm to a physical trust asset, previously identified in a periodic review and evaluation, exists; or... additional reviews and evaluations? 224.135 Section 224.135 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF... DEVELOPMENT AND SELF DETERMINATION ACT Periodic Reviews § 224.135 Under what circumstances may the Director...

Ensuring Ethical Behavior of School District Leaders

ERIC Educational Resources Information Center

Ruder, Robert

2010-01-01

When employees of public school entities retire after 35 or 40 years of service, they usually take with them a reputation built on goodwill and trust within the community in which they worked. While their physical departure is immediate, their legacy continues. But what happens if months later, evidence emerges that the educator behaved in a…

25 CFR 224.136 - How will the Director's report address a tribe's noncompliance?

Code of Federal Regulations, 2012 CFR

2012-04-01

... MINERALS TRIBAL ENERGY RESOURCE AGREEMENTS UNDER THE INDIAN TRIBAL ENERGY DEVELOPMENT AND SELF... determination of whether the tribe's noncompliance has resulted in harm or the potential for harm to a physical trust asset. (b) If the Director determines that the tribe's noncompliance may cause harm or has caused...

25 CFR 224.136 - How will the Director's report address a tribe's noncompliance?

Code of Federal Regulations, 2011 CFR

2011-04-01

... MINERALS TRIBAL ENERGY RESOURCE AGREEMENTS UNDER THE INDIAN TRIBAL ENERGY DEVELOPMENT AND SELF... determination of whether the tribe's noncompliance has resulted in harm or the potential for harm to a physical trust asset. (b) If the Director determines that the tribe's noncompliance may cause harm or has caused...

25 CFR 224.136 - How will the Director's report address a tribe's noncompliance?

Code of Federal Regulations, 2013 CFR

2013-04-01

... MINERALS TRIBAL ENERGY RESOURCE AGREEMENTS UNDER THE INDIAN TRIBAL ENERGY DEVELOPMENT AND SELF... determination of whether the tribe's noncompliance has resulted in harm or the potential for harm to a physical trust asset. (b) If the Director determines that the tribe's noncompliance may cause harm or has caused...

25 CFR 224.136 - How will the Director's report address a tribe's noncompliance?

Code of Federal Regulations, 2014 CFR

2014-04-01

... MINERALS TRIBAL ENERGY RESOURCE AGREEMENTS UNDER THE INDIAN TRIBAL ENERGY DEVELOPMENT AND SELF... determination of whether the tribe's noncompliance has resulted in harm or the potential for harm to a physical trust asset. (b) If the Director determines that the tribe's noncompliance may cause harm or has caused...

Adolescent Victims of Abuse: A Treatment Model.

ERIC Educational Resources Information Center

Anderson-Merchant, Darlene

This paper presents a theory and model for treating adolescent victims of physical and sexual abuse and neglect. The theory examines issues related to abuse or neglect and the effect that an abusive history has on adolescent development. Specific issues noted are depression, anger, low self-esteem, self-shame, lack of trust, a sense of…

Child Abuse and Multiple Personality Disorders: Review of the Literature and Suggestions for Treatment.

ERIC Educational Resources Information Center

Coons, Philip M.

1986-01-01

Multiple personality disorder is associated with a high incidence of physical and sexual abuse during childhood. While difficult to diagnose, multiple personality is easier to treat if diagnosed early in childhood or adolescence. Treatment for multiple personality focuses on establishing trust and communicating with and integrating the…

Graphene growth process modeling: a physical-statistical approach

NASA Astrophysics Data System (ADS)

Wu, Jian; Huang, Qiang

2014-09-01

As a zero-band semiconductor, graphene is an attractive material for a wide variety of applications such as optoelectronics. Among various techniques developed for graphene synthesis, chemical vapor deposition on copper foils shows high potential for producing few-layer and large-area graphene. Since fabrication of high-quality graphene sheets requires the understanding of growth mechanisms, and methods of characterization and control of grain size of graphene flakes, analytical modeling of graphene growth process is therefore essential for controlled fabrication. The graphene growth process starts with randomly nucleated islands that gradually develop into complex shapes, grow in size, and eventually connect together to cover the copper foil. To model this complex process, we develop a physical-statistical approach under the assumption of self-similarity during graphene growth. The growth kinetics is uncovered by separating island shapes from area growth rate. We propose to characterize the area growth velocity using a confined exponential model, which not only has clear physical explanation, but also fits the real data well. For the shape modeling, we develop a parametric shape model which can be well explained by the angular-dependent growth rate. This work can provide useful information for the control and optimization of graphene growth process on Cu foil.

Environmental health literacy in support of social action: an environmental justice perspective.

PubMed

White, Brandi M; Hall, Eric S; Johnson, Cheryl

2014-01-01

Different demographic groups in the U.S. experience unequal exposures to environmental hazards, i.e., 56% of the population in neighborhoods containing commercial waste facilities are people of color, with the associated poverty rates in those communities being 50% higher than in neighborhoods without commercial waste facilities. Developing programs to educate communities about environmental hazards affecting their health and quality of life is an essential component for a community to understand their true risk. The study described in this article examined the risk of environmental hazards as perceived by public housing residents and assessed the residents' preference for educational programs on environmental hazards. Residents perceived their risk factors in a broad context and they included environmental health risks caused by pollutants along with physical safety concerns from crime and law enforcement interactions. The most trusted sources of information on environmental health include community organizations, trusted individuals in the community, and television programs. Recommendations for developing community-specific environmental health education programs include using sources of environmental health information that community members trust.

Next Generation Trusted Radiation Identification System (NG-TRIS).

DOE Office of Scientific and Technical Information (OSTI.GOV)

Flynn, Adam J.; Amai, Wendy A.; Merkle, Peter Benedict

2010-05-01

The original Trusted Radiation Identification System (TRIS) was developed from 1999-2001, featuring information barrier technology to collect gamma radiation template measurements useful for arms control regime operations. The first TRIS design relied upon a multichannel analyzer (MCA) that was external to the protected volume of the system enclosure, undesirable from a system security perspective. An internal complex programmable logic device (CPLD) contained data which was not subject to software authentication. Physical authentication of the TRIS instrument case was performed by a sensitive but slow eddy-current inspection method. This paper describes progress to date for the Next Generation TRIS (NG-TRIS), whichmore » improves the TRIS design. We have incorporated the MCA internal to the trusted system volume, achieved full authentication of CPLD data, and have devised rapid methods to authenticate the system enclosure and weld seals of the NG-TRIS enclosure. For a complete discussion of the TRIS system and components upon which NG-TRIS is based, the reader is directed to the comprehensive user's manual and system reference of Seager, et al.« less

Restoring balance to industry-academia relationships in an era of institutional financial conflicts of interest: promoting research while maintaining trust.

PubMed

Johns, Michael M E; Barnes, Mark; Florencio, Patrik S

2003-02-12

Economic partnerships between industry and academia accelerate medical innovation and enhance patient access to medical advances, but such partnerships have sometimes eroded public trust in the research enterprise. There is particular risk for conflict of interest when economic partnerships extend beyond a university's corporate interests to involve institutional decision makers. Institutions and institutional decision makers should fully disclose industry-related financial interests and relationships. Without legitimate justification for such interests, individuals should divest themselves from these interests or recuse themselves from responsibility for research oversight. Management of institutional partnerships also might entail the physical separation of certain facilities, the placement of restrictions on information shared between investment and research staffs, and provision of oversight by independent review panels made up of persons who have expertise in intellectual property, finance, and research, but who are not financially or otherwise dependent on the institution. Through these means, it is possible to restore balance to industry-academia relationships, thereby promoting progress while maintaining public trust in research.

USEPA SHEDS MODEL: METHODOLOGY FOR EXPOSURE ASSESSMENT FOR WOOD PRESERVATIVES

EPA Science Inventory

A physically-based, Monte Carlo probabilistic model (SHEDS-Wood: Stochastic Human Exposure and Dose Simulation model for wood preservatives) has been applied to assess the exposure and dose of children to arsenic (As) and chromium (Cr) from contact with chromated copper arsenat...

Using a Dissecting Microscope in Teaching Introductory Chemistry.

ERIC Educational Resources Information Center

Winokur, Robert; Monroe, Manus

1985-01-01

To have students develop observational skills and acquire an excitement about chemistry, stereoscopic dissecting microscopes are used to observe the physical characteristics and chemical reactions of various substances. Several of these reactions (including dissolving potassium permanganate in deionized water and reactions between copper metal and…

Does Cu(acac)2 Quench Benzene Fluorescence? A Physical Chemistry Experiment.

ERIC Educational Resources Information Center

Marciniak, Bronislaw

1986-01-01

Describes a laboratory experiment in which benzene fluorescence is quenched by bis(acetylacetonato) copper(II). Discusses how this experiment can demonstrate a special technique used in the field of photochemistry. Provides an outline of the experimental procedure and discusses its results. (TW)

Oxidation Kinetics of Copper: An Experiment in Solid State Chemistry.

ERIC Educational Resources Information Center

Ebisuzaki, Y.; Sanborn, W. B.

1985-01-01

Oxidation kinetics in metals and the role defects play in diffusion-controlled reactions are discussed as background for a junior/senior-level experiment in the physical or inorganic chemistry laboratory. Procedures used and typical data obtained are provided for the experiment. (JN)

The structural chemistry of metallocorroles: combined X-ray crystallography and quantum chemistry studies afford unique insights.

PubMed

Thomas, Kolle E; Alemayehu, Abraham B; Conradie, Jeanet; Beavers, Christine M; Ghosh, Abhik

2012-08-21

Although they share some superficial structural similarities with porphyrins, corroles, trianionic ligands with contracted cores, give rise to fundamentally different transition metal complexes in comparison with the dianionic porphyrins. Many metallocorroles are formally high-valent, although a good fraction of them are also noninnocent, with significant corrole radical character. These electronic-structural characteristics result in a variety of fascinating spectroscopic behavior, including highly characteristic, paramagnetically shifted NMR spectra and textbook cases of charge-transfer spectra. Although our early research on corroles focused on spectroscopy, we soon learned that the geometric structures of metallocorroles provide a fascinating window into their electronic-structural characteristics. Thus, we used X-ray structure determinations and quantum chemical studies, chiefly using DFT, to obtain a comprehensive understanding of metallocorrole geometric and electronic structures. This Account describes our studies of the structural chemistry of metallocorroles. At first blush, the planar or mildly domed structure of metallocorroles might appear somewhat uninteresting particularly when compared to metalloporphyrins. Metalloporphyrins, especially sterically hindered ones, are routinely ruffled or saddled, but the missing meso carbon apparently makes the corrole skeleton much more resistant to nonplanar distortions. Ruffling, where the pyrrole rings are alternately twisted about the M-N bonds, is energetically impossible for metallocorroles. Saddling is also uncommon; thus, a number of sterically hindered, fully substituted metallocorroles exhibit almost perfectly planar macrocycle cores. Against this backdrop, copper corroles stand out as an important exception. As a result of an energetically favorable Cu(d(x2-y2))-corrole(π) orbital interaction, copper corroles, even sterically unhindered ones, are inherently saddled. Sterically hindered substituents accentuate this effect, sometimes dramatically. Thus, a crystal structure of a copper β-octakis(trifluoromethyl)-meso-triarylcorrole complex exhibits nearly orthogonal, adjacent pyrrole rings. Intriguingly, the formally isoelectronic silver and gold corroles are much less saddled than their copper congeners because the high orbital energy of the valence d(x2-y2) orbital discourages overlap with the corrole π orbital. A crystal structure of a gold β-octakis(trifluoromethyl)-meso-triarylcorrole complex exhibits a perfectly planar corrole core, which translates to a difference of 85° in the saddling dihedral angles between analogous copper and gold complexes. Gratifyingly, electrochemical, spectroscopic, and quantum chemical studies provide a coherent, theoretical underpinning for these fascinating structural phenomena. With the development of facile one-pot syntheses of corrole macrocycles in the last 10-15 years, corroles are now almost as readily accessible as porphyrins. Like porphyrins, corroles are promising building blocks for supramolecular constructs such as liquid crystals and metal-organic frameworks. However, because of their symmetry properties, corrole-based supramolecular constructs will probably differ substantially from porphyrin-based ones. We are particularly interested in exploiting the inherently saddled, chiral architectures of copper corroles to create novel oriented materials such as chiral liquid crystals. We trust that the fundamental structural principles uncovered in this Account will prove useful as we explore these fascinating avenues.

rf breakdown measurements in electron beam driven 200 GHz copper and copper-silver accelerating structures

DOE PAGES

Dal Forno, Massimo; Dolgashev, Valery; Bowden, Gordon; ...

2016-11-30

This study explores the physics of vacuum rf breakdowns in subterahertz high-gradient traveling-wave accelerating structures. We present the experimental results of rf tests of 200 GHz metallic accelerating structures, made of copper and copper-silver. These experiments were carried out at the Facility for Advanced Accelerator Experimental Tests (FACET) at the SLAC National Accelerator Laboratory. The rf fields were excited by the FACET ultrarelativistic electron beam. The traveling-wave structure is an open geometry, 10 cm long, composed of two halves separated by a gap. The rf frequency of the fundamental accelerating mode depends on the gap size and can be changedmore » from 160 to 235 GHz. When the beam travels off axis, a deflecting field is induced in addition to the longitudinal field. We measure the deflecting forces by observing the displacement of the electron bunch and use this measurement to verify the expected accelerating gradient. Furthermore, we present the first quantitative measurement of rf breakdown rates in 200 GHz metallic accelerating structures. The breakdown rate of the copper structure is 10 –2 per pulse, with a peak surface electric field of 500 MV/m and a rf pulse length of 0.3 ns, which at a relatively large gap of 1.5 mm, or one wavelength, corresponds to an accelerating gradient of 56 MV/m. For the same breakdown rate, the copper-silver structure has a peak electric field of 320 MV/m at a pulse length of 0.5 ns. For a gap of 1.1 mm, or 0.74 wavelengths, this corresponds to an accelerating gradient of 50 MV/m.« less

Multi-keV x-ray sources from metal-lined cylindrical hohlraums

NASA Astrophysics Data System (ADS)

Jacquet, L.; Girard, F.; Primout, M.; Villette, B.; Stemmler, Ph.

2012-08-01

As multi-keV x-ray sources, plastic hohlraums with inner walls coated with titanium, copper, and germanium have been fired on Omega in September 2009. For all the targets, the measured and calculated multi-keV x-ray power time histories are in a good qualitative agreement. In the same irradiation conditions, measured multi-keV x-ray conversion rates are ˜6%-8% for titanium, ˜2% for copper, and ˜0.5% for germanium. For titanium and copper hohlraums, the measured conversion rates are about two times higher than those given by hydroradiative computations. Conversely, for the germanium hohlraum, a rather good agreement is found between measured and computed conversion rates. To explain these findings, multi-keV integrated emissivities calculated with RADIOM [M. Busquet, Phys. Fluids 85, 4191 (1993)], the nonlocal-thermal-equilibrium atomic physics model used in our computations, have been compared to emissivities obtained from different other models. These comparisons provide an attractive way to explain the discrepancies between experimental and calculated quantitative results.

Copper oxide nanowires as better performance electrode material for supercapacitor application

NASA Astrophysics Data System (ADS)

Yar, A.; Dennis, J. O.; Mohamed, N. M.; Mian, M. U.; Irshad, M. I.; Mumtaz, A.

2016-11-01

Supercapacitors are highly attractive energy storage devices which are capable of delivering high power, with fast charging and long cycle life. Carbon based material rely on physical charging with less capacitance while metal oxide store charge by fast redox reaction with increased capacitance. Among metal oxide, copper oxide compounds are widely use in the form of nano and micro structures with no definite control over structure. In this work we utilized the well-controlled structure copper wires, originated from AAO template. Such well controlled structure offer better capacitance values due to easily excess of ions to the surface of wires. Performance of material was check in 3 M of potassium hydroxide (KOH). Specific capacitance (Cs) was calculated by using cyclic voltammetry (CV) and Charge discharge (CDC) test. The capacitance calculate on base on CV at 25 mV/s was 101.37 F/g while CDC showed the capacitance of 90 F/g at 2 A/g.

Highly sensitive copper fiber-in-tube solid-phase microextraction for online selective analysis of polycyclic aromatic hydrocarbons coupled with high performance liquid chromatography.

PubMed

Sun, Min; Feng, Juanjuan; Bu, Yanan; Luo, Chuannan

2015-08-21

A fiber-in-tube solid-phase microextraction (SPME) device was developed with copper wire and copper tube, which was served as both the substrate and sorbent with high physical strength and good flexibility. Its morphology and surface properties were characterized by scanning electron microscopy and energy dispersive X-ray spectrometry. It was coupled with high performance liquid chromatography (HPLC) equipment by replacing the sample loop of six-port injection valve, building the online SPME-HPLC system conveniently. Using ten polycyclic aromatic hydrocarbons (PAHs) as model analytes, extraction conditions including sampling rate, extraction time, organic content and desorption time were investigated and optimized. The copper fiber-in-tube exhibits excellent extraction efficiency toward PAHs, with enrichment factors from 268 to 2497. The established online SPME-HPLC method provides good linearity (0.05-100μgL(-1)) and low detection limits (0.001-0.01μgL(-1)) for PAHs. It has been used to determine PAHs in water samples, with recoveries in the range of 86.2-115%. Repeatability on the same extraction tube is in the range of 0.6-3.6%, and repeatability among three tubes is in the range of 5.6-20.1%. Compared with phthalates, anilines and phenols, the copper fiber-in-tube possesses good extraction selectivity for PAHs. The extraction mechanism is probably related to hydrophobic interaction and π-electron-metal interaction. Copyright © 2015 Elsevier B.V. All rights reserved.

Investigation on the properties of nano copper matrix composite via vacuum arc melting method

NASA Astrophysics Data System (ADS)

Liu, Yi; Leng, Jinfeng; Wu, Qirui; Zhang, Shaochen; Teng, Xinying

2017-10-01

Copper and copper matrix composites (CMCs) are widely used as electrical contact materials in electrical switch systems due to their excellent electrical properties. Graphene has great mechanical, physical and electrical properties, which is competent as an attractive reinforcing material for fabricating CMCs. Therefore, graphene was added to CMCs to improve the mechanical properties. In this study, graphene-reinforced copper matrix composites (Gr/Cu composites) were obtained. The xGr/Cu (x  =  0, 0.1, 0.3 and 0.5 wt.%) composites were fabricated via the vacuum arc melting method and compared the performance of them. The mechanical properties and electrical properties were obtained by measuring the hardness and conductivity. The microstructure of Gr/Cu composites was observed by optical microscopy (OM) and scanning electron microscopy (SEM). With the addition of graphene from 0 wt.% to 0.5 wt.%, the densities of materials decreased from 97.0% to 95.7%. With the increasing of graphene content, the hardness of composites increased at beginning and then decreased. In this range of adding amount, the hardness of 0.3Gr/Cu composite was up to 66.8 HB and increased by 15.4% compared to Al2O3/Cu composites without graphene. With the addition of graphene powder, the international annealing copper standard IACS% of Gr/Cu composites decreased from 86.16 to 69.86. The range of decline and the percentage of decline range are middle and 18.9%, respectively.

75 FR 33882 - Self-Regulatory Organizations; NYSE Amex LLC and NYSE Arca, Inc.; Order Granting Approval of...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-15

... contracts, options on commodity futures contracts, swaps, forward contracts and/or options on physical.... \\8\\ 17 CFR 242.600. \\9\\ NYSE Amex Rule 915 also includes stock index futures contracts and options on... Approval of Proposed Rule Changes Relating to Listing and Trading Options on the ETFS Palladium Trust and...

78 FR 75627 - Self-Regulatory Organizations: Miami International Securities Exchange LLC; Notice of Filing and...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-12

... Effectiveness of a Proposed Rule Change for the Extension of a Pilot Program for SPY Position and Exercise... eliminates the position and exercise limits for physically-settled options on the SPDR S&P 500 ETF Trust... Exchange Rule 307, Commentary .01, Position Limits, and Exchange Rule 309, Commentary .01, Exercise limits...

An Imperfect Understanding: The Air Forces Transition to Diversity and Inclusion

DTIC Science & Technology

2016-01-01

background, cultural knowledge, educational background, work background, language abilities, physical abilities, philosophical/spiritual...it resulted in an over- looked second-order effect: the universally and explicitly acknowledged need to prevent discrimination, sexual harassment, and...for leaders to encourage innovation and stimulate energy in their skilled Airmen. Complemented by the building of trust, discussed later, this

77 FR 62300 - Self-Regulatory Organizations; International Securities Exchange, LLC; Notice of Filing and...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-12

... Rule Change To Adopt a Pilot Program To Eliminate Position and Exercise Limits in SPY Options October 5... eliminate position and exercise limits for physically-settled options on the SPDR S&P ETF Trust (``SPY... Material .01 to ISE Rule 412 and Supplementary Material .01 of ISE Rule 414 to eliminate position and...

25 CFR 1000.303 - What is imminent jeopardy to natural resources?

Code of Federal Regulations, 2012 CFR

2012-04-01

... 25 Indians 2 2012-04-01 2012-04-01 false What is imminent jeopardy to natural resources? 1000.303...-DETERMINATION AND EDUCATION ACT Reassumption § 1000.303 What is imminent jeopardy to natural resources? The standard for natural resources is the same as for a physical trust asset, except that a review for...

25 CFR 1000.303 - What is imminent jeopardy to natural resources?

Code of Federal Regulations, 2013 CFR

2013-04-01

... 25 Indians 2 2013-04-01 2013-04-01 false What is imminent jeopardy to natural resources? 1000.303...-DETERMINATION AND EDUCATION ACT Reassumption § 1000.303 What is imminent jeopardy to natural resources? The standard for natural resources is the same as for a physical trust asset, except that a review for...

25 CFR 1000.303 - What is imminent jeopardy to natural resources?

Code of Federal Regulations, 2014 CFR

2014-04-01

... 25 Indians 2 2014-04-01 2014-04-01 false What is imminent jeopardy to natural resources? 1000.303...-DETERMINATION AND EDUCATION ACT Reassumption § 1000.303 What is imminent jeopardy to natural resources? The standard for natural resources is the same as for a physical trust asset, except that a review for...

78 FR 41443 - BofA Funds Series Trust, et al., Notice of Application

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-10

... offices physically separate from MLPF&S. 3. Investment decisions for the Funds are determined solely by... securities which are eligible for purchase by money market funds under rule 2a-7, including conventional... have the security in inventory and be in a position to quote a purchase and sale price that is the best...

25 CFR 224.135 - Under what circumstances may the Director conduct additional reviews and evaluations?

Code of Federal Regulations, 2011 CFR

2011-04-01

... DEVELOPMENT AND SELF DETERMINATION ACT Periodic Reviews § 224.135 Under what circumstances may the Director... submitted under subpart E of this part; (d) As follow-up to a determination that harm or the potential for harm to a physical trust asset, previously identified in a periodic review and evaluation, exists; or...

25 CFR 224.135 - Under what circumstances may the Director conduct additional reviews and evaluations?

Code of Federal Regulations, 2014 CFR

2014-04-01

... DEVELOPMENT AND SELF DETERMINATION ACT Periodic Reviews § 224.135 Under what circumstances may the Director... submitted under subpart E of this part; (d) As follow-up to a determination that harm or the potential for harm to a physical trust asset, previously identified in a periodic review and evaluation, exists; or...

25 CFR 224.135 - Under what circumstances may the Director conduct additional reviews and evaluations?

Code of Federal Regulations, 2012 CFR

2012-04-01

... DEVELOPMENT AND SELF DETERMINATION ACT Periodic Reviews § 224.135 Under what circumstances may the Director... submitted under subpart E of this part; (d) As follow-up to a determination that harm or the potential for harm to a physical trust asset, previously identified in a periodic review and evaluation, exists; or...

25 CFR 224.135 - Under what circumstances may the Director conduct additional reviews and evaluations?

Code of Federal Regulations, 2013 CFR

2013-04-01

... DEVELOPMENT AND SELF DETERMINATION ACT Periodic Reviews § 224.135 Under what circumstances may the Director... submitted under subpart E of this part; (d) As follow-up to a determination that harm or the potential for harm to a physical trust asset, previously identified in a periodic review and evaluation, exists; or...

25 CFR 1000.303 - What is imminent jeopardy to natural resources?

Code of Federal Regulations, 2010 CFR

2010-04-01

... 25 Indians 2 2010-04-01 2010-04-01 false What is imminent jeopardy to natural resources? 1000.303...-DETERMINATION AND EDUCATION ACT Reassumption § 1000.303 What is imminent jeopardy to natural resources? The standard for natural resources is the same as for a physical trust asset, except that a review for...

25 CFR 1000.303 - What is imminent jeopardy to natural resources?

Code of Federal Regulations, 2011 CFR

2011-04-01

... 25 Indians 2 2011-04-01 2011-04-01 false What is imminent jeopardy to natural resources? 1000.303...-DETERMINATION AND EDUCATION ACT Reassumption § 1000.303 What is imminent jeopardy to natural resources? The standard for natural resources is the same as for a physical trust asset, except that a review for...

76 FR 62470 - MFS Series Trust I, et al.

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-07

...] MFS Series Trust I, et al.; Notice of Application September 30, 2011. AGENCY: Securities and Exchange... Series Trust I, MFS Series Trust II, MFS Series Trust III, MFS Series Trust IV, MFS Series Trust V, MFS Series Trust VI, MFS Series Trust VII, MFS Series Trust VIII, MFS Series Trust IX, MFS Series Trust X...

[Bronchopulmonary diseases in workers engaged in deep-mined extraction of copper-nickel ore].

PubMed

Siurin, S A; Derevoedov, A A; Nikanov, A N

2008-01-01

Examinations were made in 220 male workers exposed to dust-gas (low-silicon dioxide, nitric oxides, and carbon oxide) mixture, physical exercises, and cooling microclimate on deep-mined output of copper-nickel ore. Twenty-eight per cent of the workers were found to have evolving chronic bronchitis that did not substantially affect the patients' working capacity; 3.2% had chronic obstructive pulmonary disease and 1.4% had asthma that had developed before the onset of professional activity. 32.3% of the examinees were ascertained to have individual clinicofunctional disorders that permit their identification as a bronchopulmonary disease risk group to carry out early preventive and rehabilitative measures.

Direct Measurement of the Nanomechanical Stability of a Redox Protein Active Site and Its Dependence upon Metal Binding.

PubMed

Giannotti, Marina I; Cabeza de Vaca, Israel; Artés, Juan M; Sanz, Fausto; Guallar, Victor; Gorostiza, Pau

2015-09-10

The structural basis of the low reorganization energy of cupredoxins has long been debated. These proteins reconcile a conformationally heterogeneous and exposed metal-chelating site with the highly rigid copper center required for efficient electron transfer. Here we combine single-molecule mechanical unfolding experiments with statistical analysis and computer simulations to show that the metal-binding region of apo-azurin is mechanically flexible and that high mechanical stability is imparted by copper binding. The unfolding pathway of the metal site depends on the pulling residue and suggests that partial unfolding of the metal-binding site could be facilitated by the physical interaction with certain regions of the redox protein.

Improving health sector travel.

PubMed

Hurdle, David; Davis, Adrian

2004-10-01

Preventing ill health and obesity and building more physical activity into our daily lives have never been so high on the agenda, and the way we travel can help. Many workplaces and schools are drawing up travel plans, with the aims usually to minimise car use and encourage healthier and more environmentally friendly travel. The Transport White Paper of 1998 advocated travel plans and singled out hospitals for action. Travel plans continue to be a focus within the latest Transport White Paper, launched in July 2004. This article covers various prompts to the health sector to implement travel plans. It addresses issues and concerns facing NHS Trusts, the practical things Trusts can do, and the increasing amount of good practice available. Finally, it demonstrates that travel plans can work, and are working, in the health sector.

Non-Arcing Clamp for Automotive Battery Jumper Cables.

DTIC Science & Technology

cable via an encapsulated pressure switch . The pressure switch is physically positioned between the copper jaw and the jaw end of the gripping member...such that spring pressure provided by the torsion spring is operative for closing the pressure switch when the clamp is mounted on a battery terminal

The Colour of the Noble Metals.

ERIC Educational Resources Information Center

Poole, R. T.

1983-01-01

Examines the physical basis for colors of noble metals (copper, silver, gold) developed from energy conservation/quantum mechanical view of free electron photoabsorption. Describes production of absorption edges produced by change in density of occupied valence electron states in the d-band, which allows stronger absorption in the visible photon…

47 CFR 51.323 - Standards for physical collocation and virtual collocation.

Code of Federal Regulations, 2011 CFR

2011-10-01

... accessible by both the incumbent LEC and the collocating telecommunications carrier, at which the fiber optic... technically feasible, the incumbent LEC shall provide the connection using copper, dark fiber, lit fiber, or... that the incumbent LEC may adopt include: (1) Installing security cameras or other monitoring systems...

47 CFR 51.323 - Standards for physical collocation and virtual collocation.

Code of Federal Regulations, 2010 CFR

2010-10-01

... accessible by both the incumbent LEC and the collocating telecommunications carrier, at which the fiber optic... technically feasible, the incumbent LEC shall provide the connection using copper, dark fiber, lit fiber, or... that the incumbent LEC may adopt include: (1) Installing security cameras or other monitoring systems...

Calcium carbonate scale control, effect of material and inhibitors.

PubMed

Macadam, J; Parsons, S A

2004-01-01

This paper focuses on developing a reproducible method for reducing calcium carbonate scale formation on heated surfaces where scaling can cause serious problems. It is known that calcium carbonate precipitation is sensitive to impurity ions, such as iron and zinc, even at trace concentration levels. In this paper two sets of experiments are reported. The first experiments were undertaken to investigate the effect of zinc, copper and iron dosing on CaCO3 nucleation and precipitation. Results from the experiments showed that the most effective inhibitor of CaCO3 precipitation was zinc and the effect was linked to dose levels and temperature. Copper and iron had little effect on precipitation in the dose range investigated. The second trial was undertaken to translate the precipitation data to scale formation. These tests were undertaken at 70 degrees C. 5 mg x L(-1) zinc dose reduced the scale formation by 35%. The effect of iron on calcium carbonate scaling rate was not significant. The physical nature of the material on which the scale is formed also influences the scaling. The scaling experiment was also used to investigate the effect of different surface material (stainless steel, copper and aluminium) on CaCO3 scale formation. Copper surface scaled the most.

Void growth and coalescence in irradiated copper under deformation

NASA Astrophysics Data System (ADS)

Barrioz, P. O.; Hure, J.; Tanguy, B.

2018-04-01

A decrease of fracture toughness of irradiated materials is usually observed, as reported for austenitic stainless steels in Light Water Reactors (LWRs) or copper alloys for fusion applications. For a wide range of applications (e.g. structural steels irradiated at low homologous temperature), void growth and coalescence fracture mechanism has been shown to be still predominant. As a consequence, a comprehensive study of the effects of irradiation-induced hardening mechanisms on void growth and coalescence in irradiated materials is required. The effects of irradiation on ductile fracture mechanisms - void growth to coalescence - are assessed in this study based on model experiments. Pure copper thin tensile samples have been irradiated with protons up to 0.01 dpa. Micron-scale holes drilled through the thickness of these samples subjected to uniaxial loading conditions allow a detailed description of void growth and coalescence. In this study, experimental data show that physical mechanisms of micron-scale void growth and coalescence are similar between the unirradiated and irradiated copper. However, an acceleration of void growth is observed in the later case, resulting in earlier coalescence, which is consistent with the decrease of fracture toughness reported in irradiated materials. These results are qualitatively reproduced with numerical simulations accounting for irradiation macroscopic hardening and decrease of strain-hardening capability.

Carbon-based nanostructured surfaces for enhanced phase-change cooling

NASA Astrophysics Data System (ADS)

Selvaraj Kousalya, Arun

To maintain acceptable device temperatures in the new generation of electronic devices under development for high-power applications, conventional liquid cooling schemes will likely be superseded by multi-phase cooling solutions to provide substantial enhancement to the cooling capability. The central theme of the current work is to investigate the two-phase thermal performance of carbon-based nanostructured coatings in passive and pumped liquid-vapor phase-change cooling schemes. Quantification of the critical parameters that influence thermal performance of the carbon nanostructured boiling surfaces presented herein will lead to improved understanding of the underlying evaporative and boiling mechanisms in such surfaces. A flow boiling experimental facility is developed to generate consistent and accurate heat transfer performance curves with degassed and deionized water as the working fluid. New means of boiling heat transfer enhancement by altering surface characteristics such as surface energy and wettability through light-surface interactions is explored in this work. In this regard, carbon nanotube (CNT) coatings are exposed to low-intensity irradiation emitted from a light emitting diode and the subcooled flow boiling performance is compared against a non-irradiated CNT-coated copper surface. A considerable reduction in surface superheat and enhancement in average heat transfer coefficient is observed. In another work involving CNTs, the thermal performance of CNT-integrated sintered wick structures is evaluated in a passively cooled vapor chamber. A physical vapor deposition process is used to coat the CNTs with varying thicknesses of copper to promote surface wetting with the working fluid, water. Thermal performance of the bare sintered copper powder sample and the copper-functionalized CNT-coated sintered copper powder wick samples is compared using an experimental facility that simulates the capillary fluid feeding conditions of a vapor chamber. Nanostructured samples having a thicker copper coating provided a considerable increase in dryout heat flux while maintaining lower surface superheat temperatures compared to a bare sintered powder sample; this enhancement is attributed primarily to the improved surface wettability. Dynamic contact angle measurements are conducted to quantitatively compare the surface wetting trends for varying copper coating thicknesses and confirm the increase in hydrophilicity with increasing coating thickness. The second and relatively new carbon nanostructured coating, carbon nanotubes decorated with graphitic nanopetals, are used as a template to manufacture boiling surfaces with heterogeneous wettability. Heat transfer surfaces with parallel alternating superhydrophobic and superhydrophilic stripes are fabricated by a combination of oxygen plasma treatment, Teflon coating and shadow masking. Such composite wetting surfaces exhibit enhanced flow-boiling performance compared to homogeneous wetting surfaces. Flow visualization studies elucidate the physical differences in nucleate boiling mechanisms between the different heterogeneous wetting surfaces. The third and the final carbon nanomaterial, graphene, is examined as an oxidation barrier coating for liquid and liquid-vapor phase-change cooling systems. Forced convection heat transfer experiments on bare and graphene-coated copper surfaces reveal nearly identical liquid-phase and two-phase thermal performance for the two surfaces. Surface analysis after thermal testing indicates significant oxide formation on the entire surface of the bare copper substrate; however, oxidation is observed only along the grain boundaries of the graphene-coated substrate. Results suggest that few-layer graphene can act as a protective layer even under vigorous flow boiling conditions, indicating a broad application space of few-layer graphene as an ultra-thin oxidation barrier coating.

The Design, Fabrication and Characterization of a Transparent Atom Chip

PubMed Central

Chuang, Ho-Chiao; Huang, Chia-Shiuan; Chen, Hung-Pin; Huang, Chi-Sheng; Lin, Yu-Hsin

2014-01-01

This study describes the design and fabrication of transparent atom chips for atomic physics experiments. A fabrication process was developed to define the wire patterns on a transparent glass substrate to create the desired magnetic field for atom trapping experiments. An area on the chip was reserved for the optical access, so that the laser light can penetrate directly through the glass substrate for the laser cooling process. Furthermore, since the thermal conductivity of the glass substrate is poorer than other common materials for atom chip substrate, for example silicon, silicon carbide, aluminum nitride. Thus, heat dissipation copper blocks are designed on the front and back of the glass substrate to improve the electrical current conduction. The testing results showed that a maximum burnout current of 2 A was measured from the wire pattern (with a width of 100 μm and a height of 20 μm) without any heat dissipation design and it can increase to 2.5 A with a heat dissipation design on the front side of the atom chips. Therefore, heat dissipation copper blocks were designed and fabricated on the back of the glass substrate just under the wire patterns which increases the maximum burnout current to 4.5 A. Moreover, a maximum burnout current of 6 A was achieved when the entire backside glass substrate was recessed and a thicker copper block was electroplated, which meets most requirements of atomic physics experiments. PMID:24922456

Physical Activity, Gender Difference, and Depressive Symptoms.

PubMed

Zhang, Jun; Yen, Steven T

2015-10-01

To investigate the roles of physical activity (exercise) and sociodemographic factors in depressive symptoms among men and women in the United States. 2011 U.S. Behavioral Risk Factor Surveillance System (BRFSS). Patient Health Questionnaire Depression Scale (PHQ-8) scores are aggregated and divided into five categories. An ordered switching probability model with binary endogenous physical activity is developed to accommodate ordinality of depression categories and ameliorate statistical biases due to endogeneity of physical activity. Average treatment effects suggest physical activity ameliorates depressive symptoms among mildly and moderately depressed individuals, most notably among mildly depressed women. Gender differences exist in the roles of sociodemographic factors, with age, income, race, education, employment status, and recent mental health condition playing differentiated roles in affecting depressive symptoms. Regular physical activity reduces depressive symptoms among both men and women with mild to moderate depression, notably among women. © Health Research and Educational Trust.

How different contexts of social capital are associated with self-rated health among Lithuanian high-school students.

PubMed

Novak, Dario; Emeljanovas, Arunas; Mieziene, Brigita; Štefan, Lovro; Kawachi, Ichiro

2018-01-01

Adolescents' self-rated health is related to a number of sociodemographic and socio-economic factors, health-related behaviors, and their social environment. The impact of the latter is still not well explored. An adolescent's social environment is represented by the social capital, i.e. social resources that they can access. The relationships between various contexts of social capital (family, neighborhood, peers, and school) and self-rated health among adolescents are still unclear. This study aims to examine the relationships between various social capital contexts and self-rated health in Lithuanian adolescents. The current cross-sectional study includes a nationally representative sample of 1863 adolescents (51.4% were girls) aged 14-18 years. The indicators of self-rated health as well as indicators of social capital in family, neighborhood, and school contexts were assessed. The results of the relationships between self-rated health and contexts of social capital were calculated controlling for the following covariates: physical activity, psychological distress, gender, body mass index, and family socioeconomic status. Results indicate that there are significant relationships between good self-rated health and a higher level of family support, neighborhood trust, and vertical school trust. In the final logistic regression model, while controlling for all covariates, a higher level of family support and neighborhood trust remain significant predictors of good self-rated health. Family support and neighborhood trust are important correlates of self-rated health in adolescents.

How different contexts of social capital are associated with self-rated health among Lithuanian high-school students

PubMed Central

Novak, Dario; Emeljanovas, Arunas; Mieziene, Brigita; Štefan, Lovro; Kawachi, Ichiro

2018-01-01

ABSTRACT Background. Adolescents’ self-rated health is related to a number of sociodemographic and socio-economic factors, health-related behaviors, and their social environment. The impact of the latter is still not well explored. An adolescent’s social environment is represented by the social capital, i.e. social resources that they can access. The relationships between various contexts of social capital (family, neighborhood, peers, and school) and self-rated health among adolescents are still unclear. Objective. This study aims to examine the relationships between various social capital contexts and self-rated health in Lithuanian adolescents. Methods. The current cross-sectional study includes a nationally representative sample of 1863 adolescents (51.4% were girls) aged 14–18 years. The indicators of self-rated health as well as indicators of social capital in family, neighborhood, and school contexts were assessed. The results of the relationships between self-rated health and contexts of social capital were calculated controlling for the following covariates: physical activity, psychological distress, gender, body mass index, and family socioeconomic status. Results. Results indicate that there are significant relationships between good self-rated health and a higher level of family support, neighborhood trust, and vertical school trust. In the final logistic regression model, while controlling for all covariates, a higher level of family support and neighborhood trust remain significant predictors of good self-rated health. Conclusions. Family support and neighborhood trust are important correlates of self-rated health in adolescents. PMID:29871556

"You always end up feeling like you're some hypochondriac": intimate partner violence survivors' experiences addressing depression and pain.

PubMed

Nicolaidis, Christina; Gregg, Jessica; Galian, Hilary; McFarland, Bentson; Curry, Maryann; Gerrity, Martha

2008-08-01

Little is known regarding how providers should use information about intimate partner violence (IPV) to care for depressed patients. Our objective was to explore what depressed IPV survivors believe about the relationship between abuse, mental health, and physical symptoms and to elicit their recommendations for addressing depression. Focus group study. Adult, English-speaking, female, Internal Medicine clinic patients with depressive symptoms and a history of IPV. Thematic analysis using an inductive approach (consistent with grounded theory), at a semantic level, with an essentialist paradigm. Twenty three women participated in 5 focus groups. Although selected because of their depression, participants often felt their greatest concerns were physical. They acknowledged that their abuse history, depression, and physical complaints compound each other. They appreciated the need for health care workers to know about their depression and IPV history to get a "full picture" of their health, but they were often hesitant to discuss such issues with providers because of their fear that such information would make providers think their symptoms were "all in their head" or would encourage providers to discount their pain. Participants discussed difficulties related to trust and control in relationships with providers and gave recommendations as to how providers can earn their trust. Understanding a patient's IPV history may allow providers to develop a better therapeutic relationship. To treat depression adequately, it is important for providers to reassure patients that they believe their physical symptoms; to communicate respect for patients' intelligence, experience, and complexity; and to share control.

Effect of anode material on the breakdown in low-pressure helium gas

NASA Astrophysics Data System (ADS)

Demidov, V. I.; Adams, S. F.; Kudryavtsev, A. A.; Kurlyandskaya, I. P.; Miles, J. A.; Tolson, B. A.

2017-10-01

The electric breakdown of gases is one of the fundamental phenomena of gas discharge physics. It has been studied for a long time but still attracts incessant interest of researchers. Besides the interesting physics, breakdown is important for many applications including development of reliable electric insulation in electric grids and the study of different aspects of gas discharge physics. In this work an experimental study of the electric breakdown in helium gas for the plane-parallel electrode configuration has been conducted using a copper cathode and a variety of anode materials: copper, aluminum, stainless steel, graphite, platinum-plated aluminum and gold-plated aluminum. According to the Paschen law for studied electrode configuration, the breakdown voltage is a function of the product of gas pressure and inter-electrode gap. The breakdown processes on the left, lower pressure side of the Paschen curve have been the subject of this investigation. For those pressures, the Paschen curve may become multi-valued, where any given pressure corresponds to three breakdown voltage values. It was experimentally demonstrated that the form of the Paschen curve might strongly depend on the material of the anode and the cleanness of the anode surface. A possible explanation for this phenomenon is that electrons streaming from the cathode are reflected by the surface of the anode.

In Healthy Young Men, a Short Exhaustive Exercise Alters the Oxidative Stress Only Slightly, Independent of the Actual Fitness.

PubMed

Finkler, Maya; Hochman, Ayala; Pinchuk, Ilya; Lichtenberg, Dov

2016-01-01

The aim of the present study was to evaluate the apparent disagreement regarding the effect of a typical cycling progressive exercise, commonly used to assess VO2max, on the kinetics of ex vivo copper induced peroxidation of serum lipids. Thirty-two (32) healthy young men, aged 24-30 years, who do not smoke and do not take any food supplements, participated in the study. Blood was withdrawn from each participant at three time points (before the exercise and 5 minutes and one hour after exercise). Copper induced peroxidation of sera made of the blood samples was monitored by spectrophotometry. For comparison, we also assayed TBARS concentration and the activity of oxidation-related enzymes. The physical exercise resulted in a slight and reversible increase of TBARS and slight changes in the activities of the studied antioxidant enzymes and the lag preceding peroxidation did not change substantially. Most altered parameters returned to baseline level one hour after exercise. Notably, the exercise-induced changes in OS did not correlate with the physical fitness of the subjects, as evaluated in this study (VO2max = 30-60 mL/min/kg). We conclude that in healthy young fit men a short exhaustive exercise alters only slightly the OS, independent of the actual physical fitness.

Trust-region based return mapping algorithm for implicit integration of elastic-plastic constitutive models

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lester, Brian; Scherzinger, William

2017-01-19

Here, a new method for the solution of the non-linear equations forming the core of constitutive model integration is proposed. Specifically, the trust-region method that has been developed in the numerical optimization community is successfully modified for use in implicit integration of elastic-plastic models. Although attention here is restricted to these rate-independent formulations, the proposed approach holds substantial promise for adoption with models incorporating complex physics, multiple inelastic mechanisms, and/or multiphysics. As a first step, the non-quadratic Hosford yield surface is used as a representative case to investigate computationally challenging constitutive models. The theory and implementation are presented, discussed, andmore » compared to other common integration schemes. Multiple boundary value problems are studied and used to verify the proposed algorithm and demonstrate the capabilities of this approach over more common methodologies. Robustness and speed are then investigated and compared to existing algorithms. Through these efforts, it is shown that the utilization of a trust-region approach leads to superior performance versus a traditional closest-point projection Newton-Raphson method and comparable speed and robustness to a line search augmented scheme.« less

Trust-region based return mapping algorithm for implicit integration of elastic-plastic constitutive models

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lester, Brian T.; Scherzinger, William M.

2017-01-19

A new method for the solution of the non-linear equations forming the core of constitutive model integration is proposed. Specifically, the trust-region method that has been developed in the numerical optimization community is successfully modified for use in implicit integration of elastic-plastic models. Although attention here is restricted to these rate-independent formulations, the proposed approach holds substantial promise for adoption with models incorporating complex physics, multiple inelastic mechanisms, and/or multiphysics. As a first step, the non-quadratic Hosford yield surface is used as a representative case to investigate computationally challenging constitutive models. The theory and implementation are presented, discussed, and comparedmore » to other common integration schemes. Multiple boundary value problems are studied and used to verify the proposed algorithm and demonstrate the capabilities of this approach over more common methodologies. Robustness and speed are then investigated and compared to existing algorithms. As a result through these efforts, it is shown that the utilization of a trust-region approach leads to superior performance versus a traditional closest-point projection Newton-Raphson method and comparable speed and robustness to a line search augmented scheme.« less

Culturally Aware Agents for Training Environments (CAATE): Phase I Final Report

DTIC Science & Technology

2009-01-01

attitudes, relationships , personality, personal traits, state, social roles, physical context. The initial set of potentially important cultural... relationships that affect culturally situated behavior. For instance, we will want to be able to model interconnections such as familial... relationships , group membership, and attitudes (e.g., trust, dislike). To accomplish this, our design leverages social network modeling technologies provided by

76 FR 55984 - Self-Regulatory Organizations; ICE Clear Credit LLC; Notice of Filing of Proposed Rule Change To...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-09

... Organizations; ICE Clear Credit LLC; Notice of Filing of Proposed Rule Change To Add Rules Related to the..., 2011, ICE Clear Credit LLC (``ICC'') filed with the Securities and Exchange Commission (``Commission... Contracts by ICE Trust), 26D- 315 (Terms of the Cleared SES Contract), 26D-316 (Relevant Physical Settlement...

76 FR 65763 - Self-Regulatory Organizations; ICE Clear Credit LLC; Order Approving Proposed Rule Change To Add...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-24

... Organizations; ICE Clear Credit LLC; Order Approving Proposed Rule Change To Add Rules Related to the Clearing of Emerging Markets Sovereigns October 18, 2011. I. Introduction On August 30, 2011, ICE Clear Credit... Contracts by ICE Trust), 26D- 315 (Terms of the Cleared SES Contract), 26D-316 (Relevant Physical Settlement...

Is It Time for a US Cyber Force?

DTIC Science & Technology

2015-02-17

network of information technology (IT) and resident data, including the Internet , telecommunications networks, computer systems, and embedded processors...and controllers.13 JP 3-12 further goes on to explain cyberspace in terms of three layers: physical network, logical network, and cyber- persona .14...zero day) vulnerabilities against Microsoft operating system code using trusted hardware vendor certificates to cloak their presence. Though not

A Teacher's Guide to Including Students with Disabilities in General Physical Education, Third Edition

ERIC Educational Resources Information Center

Block, Martin E.

2007-01-01

This book, provides a comprehensive guide to making phys. ed. inclusion work for students of all ages. In this new edition of the trusted bestseller, renowned expert Martin E. Block and a select group of highly respected contributors provide: (1) new information reflecting all the latest updates to IDEA, other disability-related legislation, and…

Big Pile or Small Pile?

ERIC Educational Resources Information Center

Branca, Mario; Quidacciolu, Rossana G.; Soletta, Isabella

2013-01-01

The construction of a voltaic pile (battery) is a simple laboratory activity that commemorates the invention of this important device and is of great help in teaching physics. The voltaic pile is often seen as a scientific toy, with the "pile" being constructed from fruit. These toys use some strips of copper and zinc inserted in a piece…

Unit: Charge, Inspection Pack, National Trial Print. Reference No. 214.

ERIC Educational Resources Information Center

Australian Science Education Project, Toorak, Victoria.

This physical science unit from the Australian Science Education Project (ASEP) focuses on electrostatics. After students complete the activities contained in the core of the unit, they have six optional activities to pursue: How do charged objects behave? (conductors, insulators, charged objects); What is blue? (formation of copper ion); Putting…

Modeling Graphene Contrast on Copper Surfaces Using Optical Microscopy

DTIC Science & Technology

2014-10-01

Raman spectrum of graphene and graphene layers. Physical Review Letters. 2006;97(18):187401. 19. Stankovich S, Dikin DA, Piner RD, Kohlhaas KA...graphene: interference colors of ultrathin graphite on SiO2. Nano Letters. 2007;7(9):2707–2710. 11 26. Jung I, Pelton M, Piner R, Dikin DA

Superconductivity at Dawn of the Iron Age

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tesanovic, Zlatko

2010-03-03

Superconductivity is a stunning quantum phenomenon and among the deepest paradigms in all of physics. From fundamental theories of the universe to strange goings-on in exotic materials to medical imaging and cell phones, its conceptual and practical dimensions span a reach as wide as anything in science. Twenty-odd years ago, the discovery of copper oxides ushered in a new era of high-temperature superconductivity, and the joyous exuberance that followed - with physicists throwing everything from fancy gauge theories to synchrotron radiation into its kitchen sink - only recently began to show any signs of waning. In the spring of 2008,more » as if on cue, a new family of iron pnictide high-temperature superconductors burst on the scene, hinting at an alternative route to room-temperature superconductivity and all of its momentous consequences. Fueled by genuine excitement - and a bit of hype - the iron-based superconductivity turned into a science blockbuster of 2009. I will present a pedagogical review of this new field, contrast the physics of iron- and copper-based systems, and speculate on the microscopic origins of the two types of high-temperature superconductivity.« less

The uses of radiotracers in the life sciences

NASA Astrophysics Data System (ADS)

Ruth, Thomas J.

2009-01-01

Radionuclides have been used to follow physical, chemical and biological processes almost from the time of their discovery. Probably the application with the biggest impact has been in the medical field where radionuclides have been incorporated into biologically active molecules and used to diagnose a wide variety of diseases and to treat many disorders. Other uses in the life sciences, in general, are related to using a radioactive isotope as marker for an existing species such as nitrogen-13 in plant studies or copper-67 to track copper catalysts in phytoplankton. This review describes in general terms these uses as well as providing the reader with the background related to the physical properties of radioactive decay, the concepts associated with the production of radionuclides using reactors or accelerators and the fundamentals of imaging radioactivity. The advances in imaging technology in recent years has had a profound impact on the use of radionuclides in positron emission tomography and the coupling of other imaging modalities to provide very precise insights into human disease. The variety of uses for radiotracers in science is almost boundless dependent only upon ones imagination.

Superconductivity at Dawn of the Iron Age

ScienceCinema

Tesanovic, Zlatko

2018-01-12

Superconductivity is a stunning quantum phenomenon and among the deepest paradigms in all of physics. From fundamental theories of the universe to strange goings-on in exotic materials to medical imaging and cell phones, its conceptual and practical dimensions span a reach as wide as anything in science. Twenty-odd years ago, the discovery of copper oxides ushered in a new era of high-temperature superconductivity, and the joyous exuberance that followed - with physicists throwing everything from fancy gauge theories to synchrotron radiation into its kitchen sink - only recently began to show any signs of waning. In the spring of 2008, as if on cue, a new family of iron pnictide high-temperature superconductors burst on the scene, hinting at an alternative route to room-temperature superconductivity and all of its momentous consequences. Fueled by genuine excitement - and a bit of hype - the iron-based superconductivity turned into a science blockbuster of 2009. I will present a pedagogical review of this new field, contrast the physics of iron- and copper-based systems, and speculate on the microscopic origins of the two types of high-temperature superconductivity.

Interface Defect States and Charge Transport Properties in Low-Cost Photovoltaic Devices made from Scalable Deposition Methods

NASA Astrophysics Data System (ADS)

Marin, Andrew; Munoz-Rojas, David; Iza, Diana; Gershon, Talia; MacManus-Driscoll, Judith

2011-03-01

In-plane (parallel to the substrate) polymer diffusion at and near interfaces has significant implications for polymeric surfactants used in tertiary oil recovery, exfoliation of clay sheets in polymer nano-composites, and several other high technology applications. Here, we report a study on the in-plane diffusion of whole polymer chains confined between interfaces using fluorescence recovery after photobleaching. Adapted from quantitative biology, FRAP provides a platform to independently study the effect of temperature, molecular weight, and film thickness on in-plane diffusion of polymers confined between interfaces. Fluorescently labeled polymers were synthesized, spin coated onto quartz substrates and the self-diffusion coefficient was measured by irreversibly photobleaching fluorophores in a pre-defined pattern and monitoring recovery of fluorescence over time. Preliminary results indicate that for thick films the diffusion coefficient is consistent with bulk values. The authors would like to thank the Gates-Cambridge Trust and the International Copper Association.

Method and apparatus for the management of hazardous waste material

DOEpatents

Murray, Jr., Holt

1995-01-01

A container for storing hazardous waste material, particularly radioactive waste material, consists of a cylindrical body and lid of precipitation hardened C17510 beryllium-copper alloy, and a channel formed between the mated lid and body for receiving weld filler material of C17200 copper-beryllium alloy. The weld filler material has a precipitation hardening temperature lower than the aging kinetic temperature of the material of the body and lid, whereby the weld filler material is post weld heat treated for obtaining a weld having substantially the same physical, thermal, and electrical characteristics as the material of the body and lid. A mechanical seal assembly is located between an interior shoulder of the body and the bottom of the lid for providing a vacuum seal.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Burch, S.W.; Goven, A.J.; Fitzpatrick, L.C.

An in vitro assay has been developed for rapid (48 h) evaluation of cytotoxic effects of exposure (24 h) of earthworm coelomocytes. The assay, inhibition of phagocytosis (24 h) of stained yeast cells and cell viability, links a traditional soil bioassay organism (Lumbricus terrestris) with a laboratory protocol for use in evaluating physical/chemical fractions resulting from terrestrial TIE manipulations. The assay was developed using copper sulfate as a reference toxicant. Copper exposures as low as 2--4 pg/ml. resulted in 20--60% inhibition of phagocytosis without significant decrease in cell viability. Exposures above 10 pg/ml resulted in reduced cell viability and inhibitionmore » of phagocytosis. The assay was successfully applied to terrestrial TIE fractions derived from extractions of soil from a PCP contaminated wood treatment site.« less

Mla- and Rom1-mediated control of microRNA398 and chloroplast copper/zinc superoxide dismutase regulates cell death in response to the barley powdery mildew fungus.

PubMed

Xu, Weihui; Meng, Yan; Wise, Roger P

2014-03-01

• Barley (Hordeum vulgare L.) Mildew resistance locus a (Mla) confers allele-specific interactions with natural variants of the ascomycete fungus Blumeria graminis f. sp. hordei (Bgh), the causal agent of powdery mildew disease. Significant reprogramming of Mla-mediated gene expression occurs upon infection by this obligate biotrophic pathogen. • We utilized a proteomics-based approach, combined with barley mla, required for Mla12 resistance1 (rar1), and restoration of Mla resistance1 (rom1) mutants, to identify components of Mla-directed signaling. • Loss-of-function mutations in Mla and Rar1 both resulted in the reduced accumulation of chloroplast copper/zinc superoxide dismutase 1 (HvSOD1), whereas loss of function in Rom1 re-established HvSOD1 levels. In addition, both Mla and Rom1 negatively regulated hvu-microRNA398 (hvu-miR398), and up-regulation of miR398 was coupled to reduced HvSOD1 expression. Barley stripe mosaic virus (BSMV)-mediated over-expression of both barley and Arabidopsis miR398 repressed accumulation of HvSOD1, and BSMV-induced gene silencing of HvSod1 impeded Mla-triggered H₂O₂ and hypersensitive reaction (HR) at barley-Bgh interaction sites. • These data indicate that Mla- and Rom1-regulated hvu-miR398 represses HvSOD1 accumulation, influencing effector-induced HR in response to the powdery mildew fungus. No claim to original US Government works. New Phytologist © 2013 New Phytologist Trust.

Interrelationships of adult attachment orientations, health status and worrying among fibromyalgia patients.

PubMed

Oliveira, Paula; Costa, Maria Emilía

2009-11-01

This study examined associations between adult attachment dimensions, perceived health status and worrying (coping strategy with chronic pain), and explored whether worrying mediated observed relationships between attachment dimensions and health outcomes within a sample of 128 Portuguese female fibromyalgia patients. Physical health status was inversely correlated with dependence and worrying; mental health status was positively correlated with trust, and inversely related to attachment-related ambivalence, dependence and worrying. Finally, worrying mediated relationships between dependence and both physical and mental health status; moreover, worrying partially mediated the relationship between ambivalence and mental health status. Implications of the findings are discussed.

76 FR 58849 - Legg Mason Partners Equity Trust, et al.;

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-22

...] Legg Mason Partners Equity Trust, et al.; Notice of Application September 15, 2011. AGENCY: Securities... Trust (``LMP Equity Trust''), Legg Mason Partners Variable Equity Trust (``LMP Variable Equity Trust'' and together with LMP Equity Trust, the ``Trusts''), Legg Mason Partners Fund Advisor, LLC (``LMPFA...

Modeling physical vapor deposition of energetic materials

DOE PAGES

Shirvan, Koroush; Forrest, Eric C.

2018-03-28

Morphology and microstructure of organic explosive films formed using physical vapor deposition (PVD) processes strongly depends on local surface temperature during deposition. Currently, there is no accurate means of quantifying the local surface temperature during PVD processes in the deposition chambers. This study focuses on using a multiphysics computational fluid dynamics tool, STARCCM+, to simulate pentaerythritol tetranitrate (PETN) deposition. The PETN vapor and solid phase were simulated using the volume of fluid method and its deposition in the vacuum chamber on spinning silicon wafers was modeled. The model also included the spinning copper cooling block where the wafers are placedmore » along with the chiller operating with forced convection refrigerant. Implicit time-dependent simulations in two- and three-dimensional were performed to derive insights in the governing physics for PETN thin film formation. PETN is deposited at the rate of 14 nm/s at 142.9 °C on a wafer with an initial temperature of 22 °C. The deposition of PETN on the wafers was calculated at an assumed heat transfer coefficient (HTC) of 400 W/m 2 K. This HTC proved to be the most sensitive parameter in determining the local surface temperature during deposition. Previous experimental work found noticeable microstructural changes with 0.5 mm fused silica wafers in place of silicon during the PETN deposition. This work showed that fused silica slows initial wafer cool down and results in ~10 °C difference for the surface temperature at 500 μm PETN film thickness. It was also found that the deposition surface temperature is insensitive to the cooling power of the copper block due to the copper block's very large heat capacity and thermal conductivity relative to the heat input from the PVD process. Future work should incorporate the addition of local stress during PETN deposition. Lastly, based on simulation results, it is also recommended to investigate the impact of wafer surface energy on the PETN microstructure and morphology formation.« less

Modeling physical vapor deposition of energetic materials

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shirvan, Koroush; Forrest, Eric C.

Morphology and microstructure of organic explosive films formed using physical vapor deposition (PVD) processes strongly depends on local surface temperature during deposition. Currently, there is no accurate means of quantifying the local surface temperature during PVD processes in the deposition chambers. This study focuses on using a multiphysics computational fluid dynamics tool, STARCCM+, to simulate pentaerythritol tetranitrate (PETN) deposition. The PETN vapor and solid phase were simulated using the volume of fluid method and its deposition in the vacuum chamber on spinning silicon wafers was modeled. The model also included the spinning copper cooling block where the wafers are placedmore » along with the chiller operating with forced convection refrigerant. Implicit time-dependent simulations in two- and three-dimensional were performed to derive insights in the governing physics for PETN thin film formation. PETN is deposited at the rate of 14 nm/s at 142.9 °C on a wafer with an initial temperature of 22 °C. The deposition of PETN on the wafers was calculated at an assumed heat transfer coefficient (HTC) of 400 W/m 2 K. This HTC proved to be the most sensitive parameter in determining the local surface temperature during deposition. Previous experimental work found noticeable microstructural changes with 0.5 mm fused silica wafers in place of silicon during the PETN deposition. This work showed that fused silica slows initial wafer cool down and results in ~10 °C difference for the surface temperature at 500 μm PETN film thickness. It was also found that the deposition surface temperature is insensitive to the cooling power of the copper block due to the copper block's very large heat capacity and thermal conductivity relative to the heat input from the PVD process. Future work should incorporate the addition of local stress during PETN deposition. Lastly, based on simulation results, it is also recommended to investigate the impact of wafer surface energy on the PETN microstructure and morphology formation.« less

Social trust, interpersonal trust and self-rated health in China: a multi-level study.

PubMed

Feng, Zhixin; Vlachantoni, Athina; Liu, Xiaoting; Jones, Kelvyn

2016-11-08

Trust is important for health at both the individual and societal level. Previous research using Western concepts of trust has shown that a high level of trust in society can positively affect individuals' health; however, it has been found that the concepts and culture of trust in China are different from those in Western countries and research on the relationship between trust and health in China is scarce. The analyses use data from the national scale China General Social Survey (CGSS) on adults aged above 18 in 2005 and 2010. Two concepts of trust ("out-group" and "in-group" trust) are used to examine the relationship between trust and self-rated health in China. Multilevel logistical models are applied, examining the trust at the individual and societal level on individuals' self-rated health. In terms of interpersonal trust, both "out-group" and "in-group" trust are positively associated with good health in 2005 and 2010. At the societal level, the relationships between the two concepts of trust and health are different. In 2005, higher "out-group" social trust (derived from trust in strangers) is positively associated with better health; however, higher "in-group" social trust (derived from trust in most people) is negatively associated with good health in 2010. The cross-level interactions show that lower educated individuals (no education or only primary level), rural residents and those on lower incomes are the most affected groups in societies with higher "out-group" social trust; whereas people with lower levels of educational attainment, a lower income, and those who think that most people can be trusted are the most affected groups in societies with higher "in-group" social trust. High levels of interpersonal trust are of benefit to health. Higher "out-group" social trust is positively associated with better health; while higher "in-group" social trust is negatively associated with good health. Individuals with different levels of educational attainment are affected by trust differently.

Energy Harvesting from Salinity Gradient

NASA Astrophysics Data System (ADS)

Muhthassim, B.; Thian, X. K.; Hasan, K. N. Md

2018-04-01

Abstract: Energy harvesting from salt water received attention started back in 1970s’, but due to varying interests in the field and the growing potentials of other more promising sources, more work was required to fully establish it. This paper aims at identifying existing techniques of energy harvesting and the methodology involved determining an effective technique for small scale applications of the method. Capacitive deionization technique which involves electrochemical reaction was chosen for further analysis. The experiment was conducted to analyze factors affecting its performance including the electrode and the electrolyte. Combination electrode of carbon/aluminium, copper/aluminium and carbon/copper were selected and tested with different concentration of salty water. From the experiment, copper and aluminum electrodes were found to be the most effective among the rest. A DC-DC boost converter was used to step-up the voltage. Physical implementation of the circuit was done and the circuit was tested in which an input voltage of 1.022 V was boosted to 1.255 V. The efficiency of the boost converter was 38.17 % based on input power and output power obtained.

Effect of Heat and Laser Treatment on Cu2S Thin Film Sprayed on Polyimide Substrate

NASA Astrophysics Data System (ADS)

Magdy, Wafaa; Mahmoud, Fawzy A.; Nassar, Amira H.

2018-02-01

Three samples of copper sulfide Cu2S thin film were deposited on polyimide substrate by spray pyrolysis using deposition temperature of 400°C and deposition time of about 45 min. One of the samples was left as deposited, another was heat treated, while the third was laser treated. The structural, surface morphological, optical, mechanical, and electrical properties of the films were investigated. X-ray diffraction (XRD) analysis showed that the copper sulfide films were close to copper-rich phase (Cu2S). Increased crystallite size after heat and laser treatment was confirmed by XRD analysis and scanning electron microscopy. Vickers hardness measurements showed that the samples' hardness values were enhanced with increasing crystallite size, representing an inverse Hall-Petch (H-P) effect. The calculated optical bandgap of the treated films was lower than that of the deposited film. Finally, it was found that both heat and laser treatment enhanced the physical properties of the sprayed Cu2S films on polyimide substrate for use in solar energy applications.

A novel copper/polydimethiylsiloxane nanocomposite for copper-containing intrauterine contraceptive devices.

PubMed

Xu, X X; Ding, M H; Zhang, J X; Zheng, W; Li, L; Zheng, Y F

2013-11-01

In this article, a novel composite of copper (Cu) nanoparticles and polydimethiylsiloxane (PDMS) has been prepared and investigated for the potential application in Cu-containing intrauterine device. The Cu/PDMS composite with various mass fraction of Cu nanoparticles was fabricated via the hot vulcanizing process. The chemical structures and surface morphologies of the Cu/PDMS composites were characterized confirming the physical interaction between Cu nanoparticles and PDMS. The surface morphology observation using scanning electron microscope and atomic force microscope showed the agglomeration of Cu nanoparticles in PDMS matrix and the distribution of the agglomerations was more uniform with increased amount of Cu nanoparticles. The cupric ion release behaviors of the Cu/PDMS composites with different amounts of Cu nanoparticles were investigated in simulated uterine fluid at 37°C for 150 days. The corrosion morphologies of the Cu/PDMS composites were also characterized. Both the burst release rate of the cupric ion in the first few days and the steady release rate after 30-day immersion were improved. The cytotoxicity test has been done for the Cu/PDMS composites. Copyright © 2013 Wiley Periodicals, Inc.

A model for finite-deformation nonlinear thermomechanical response of single crystal copper under shock conditions

NASA Astrophysics Data System (ADS)

Luscher, Darby J.; Bronkhorst, Curt A.; Alleman, Coleman N.; Addessio, Francis L.

2013-09-01

A physically consistent framework for combining pressure-volume-temperature equations of state with crystal plasticity models is developed for the application of modeling the response of single and polycrystals under shock conditions. The particular model is developed for copper, thus the approach focuses on crystals of cubic symmetry although many of the concepts in the approach are applicable to crystals of lower symmetry. We employ a multiplicative decomposition of the deformation gradient into isochoric elastic, thermoelastic dilation, and plastic parts leading to a definition of isochoric elastic Green-Lagrange strain. This finite deformation kinematic decomposition enables a decomposition of Helmholtz free-energy into terms reflecting dilatational thermoelasticity, strain energy due to long-range isochoric elastic deformation of the lattice and a term reflecting energy stored in short range elastic lattice deformation due to evolving defect structures. A model for the single crystal response of copper is implemented consistent with the framework into a three-dimensional Lagrangian finite element code. Simulations exhibit favorable agreement with single and bicrystal experimental data for shock pressures ranging from 3 to 110 GPa.

Copper nanocoils synthesized through solvothermal method

PubMed Central

Liu, Yanjuan; Liu, Xiaowei; Zhan, Yongjie; Fan, Haiming; Lu, Yang

2015-01-01

Recently helical nanostructures such as nanosprings and nanocoils have drawn great interests in nanotechnology, due to their unique morphologies and physical properties, and they may be potential building blocks in sorts of electromechanical, magnetic, photoelectronic and plasmonic devices at micro/nanoscales. In this report, multi-turns copper nanocoils were synthesized through a modified solvothermal method, in which the mixture of water and N-methyl-2-pyrrolidone (NMP) were selected as reaction medium and copolymer poly(1-vinylpyrrolidone-co-vinyl acetate) (PVP/VA 64E) as reductant. In the liquid solution, nanosprings could be formed from relaxed nanocoils and demonstrated high elasticity. These nanocoils and nanosprings are of single crystalline structure, with the characteristics wire diameters ranging from tens to a few hundreds of nanometers and the ring/coil diameters mostly ~10–35 microns. Their growth and deformation mechanisms were then investigated and discussed along with that of previously reported single-turn copper nanorings. This work could be of importance for researchers working on synthesis and applications of novel 1-D helical nanomaterials and their functional devices. PMID:26607386

How can we help students appreciate physics education?

NASA Astrophysics Data System (ADS)

Lin, Jia-Ling; Zaki, Eman; Schmidt, Jason; Woolston, Don

2004-03-01

Helping students appreciate physics education is a formidable task, considering that many students struggle to pass introductory physics courses. Numerous efforts have been made for this undertaking because it is an important step leading to successful learning. In an out-of-classroom academic program, the Supplemental Instruction (SI) Program, we have used the approach, INSPIRE (inquiry, network, skillfulness, perseverance, intuition, reasoning, and effort), to help more students value their experiences in these courses. The method basically includes key elements outlined by experts in physics education [1]. Student responses have been encouraging. Having undergraduates as facilitators in the program is advantageous in promoting principles of physics education. Their training emphasizes tenacity, resourcefulness, understanding, support, and teamwork, i.e. TRUST. We present the organization and focus of the SI Program, and discuss how these improve learning atmosphere and facilitate learning. [1] Edward F. Redish et al, Am J. Phys. 66(3), March 1998.

25 CFR 1000.354 - What is a trust evaluation?

Code of Federal Regulations, 2010 CFR

2010-04-01

... that the functions are performed in accordance with trust standards as defined by Federal law. Trust... 25 Indians 2 2010-04-01 2010-04-01 false What is a trust evaluation? 1000.354 Section 1000.354... Trust Evaluation Review Annual Trust Evaluations § 1000.354 What is a trust evaluation? A trust...

26 CFR 26.2654-1 - Certain trusts treated as separate trusts.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 26 Internal Revenue 14 2010-04-01 2010-04-01 false Certain trusts treated as separate trusts. 26... 1986 § 26.2654-1 Certain trusts treated as separate trusts. (a) Single trust treated as separate trusts—(1) Substantially separate and independent shares—(i) In general. If a single trust consists solely...

Trust Model of Wireless Sensor Networks and Its Application in Data Fusion

PubMed Central

Chen, Zhenguo; Tian, Liqin; Lin, Chuang

2017-01-01

In order to ensure the reliability and credibility of the data in wireless sensor networks (WSNs), this paper proposes a trust evaluation model and data fusion mechanism based on trust. First of all, it gives the model structure. Then, the calculation rules of trust are given. In the trust evaluation model, comprehensive trust consists of three parts: behavior trust, data trust, and historical trust. Data trust can be calculated by processing the sensor data. Based on the behavior of nodes in sensing and forwarding, the behavior trust is obtained. The initial value of historical trust is set to the maximum and updated with comprehensive trust. Comprehensive trust can be obtained by weighted calculation, and then the model is used to construct the trust list and guide the process of data fusion. Using the trust model, simulation results indicate that energy consumption can be reduced by an average of 15%. The detection rate of abnormal nodes is at least 10% higher than that of the lightweight and dependable trust system (LDTS) model. Therefore, this model has good performance in ensuring the reliability and credibility of the data. Moreover, the energy consumption of transmitting was greatly reduced. PMID:28350347

A reliable control system for measurement on film thickness in copper chemical mechanical planarization system

NASA Astrophysics Data System (ADS)

Li, Hongkai; Qu, Zilian; Zhao, Qian; Tian, Fangxin; Zhao, Dewen; Meng, Yonggang; Lu, Xinchun

2013-12-01

In recent years, a variety of film thickness measurement techniques for copper chemical mechanical planarization (CMP) are subsequently proposed. In this paper, the eddy-current technique is used. In the control system of the CMP tool developed in the State Key Laboratory of Tribology, there are in situ module and off-line module for measurement subsystem. The in situ module can get the thickness of copper film on wafer surface in real time, and accurately judge when the CMP process should stop. This is called end-point detection. The off-line module is used for multi-points measurement after CMP process, in order to know the thickness of remained copper film. The whole control system is structured with two levels, and the physical connection between the upper and the lower is achieved by the industrial Ethernet. The process flow includes calibration and measurement, and there are different algorithms for two modules. In the process of software development, C++ is chosen as the programming language, in combination with Qt OpenSource to design two modules' GUI and OPC technology to implement the communication between the two levels. In addition, the drawing function is developed relying on Matlab, enriching the software functions of the off-line module. The result shows that the control system is running stably after repeated tests and practical operations for a long time.

A reliable control system for measurement on film thickness in copper chemical mechanical planarization system.

PubMed

Li, Hongkai; Qu, Zilian; Zhao, Qian; Tian, Fangxin; Zhao, Dewen; Meng, Yonggang; Lu, Xinchun

2013-12-01

In recent years, a variety of film thickness measurement techniques for copper chemical mechanical planarization (CMP) are subsequently proposed. In this paper, the eddy-current technique is used. In the control system of the CMP tool developed in the State Key Laboratory of Tribology, there are in situ module and off-line module for measurement subsystem. The in situ module can get the thickness of copper film on wafer surface in real time, and accurately judge when the CMP process should stop. This is called end-point detection. The off-line module is used for multi-points measurement after CMP process, in order to know the thickness of remained copper film. The whole control system is structured with two levels, and the physical connection between the upper and the lower is achieved by the industrial Ethernet. The process flow includes calibration and measurement, and there are different algorithms for two modules. In the process of software development, C++ is chosen as the programming language, in combination with Qt OpenSource to design two modules' GUI and OPC technology to implement the communication between the two levels. In addition, the drawing function is developed relying on Matlab, enriching the software functions of the off-line module. The result shows that the control system is running stably after repeated tests and practical operations for a long time.

A reliable control system for measurement on film thickness in copper chemical mechanical planarization system

DOE Office of Scientific and Technical Information (OSTI.GOV)

Li, Hongkai; Qu, Zilian; Zhao, Qian

In recent years, a variety of film thickness measurement techniques for copper chemical mechanical planarization (CMP) are subsequently proposed. In this paper, the eddy-current technique is used. In the control system of the CMP tool developed in the State Key Laboratory of Tribology, there are in situ module and off-line module for measurement subsystem. The in situ module can get the thickness of copper film on wafer surface in real time, and accurately judge when the CMP process should stop. This is called end-point detection. The off-line module is used for multi-points measurement after CMP process, in order to knowmore » the thickness of remained copper film. The whole control system is structured with two levels, and the physical connection between the upper and the lower is achieved by the industrial Ethernet. The process flow includes calibration and measurement, and there are different algorithms for two modules. In the process of software development, C++ is chosen as the programming language, in combination with Qt OpenSource to design two modules’ GUI and OPC technology to implement the communication between the two levels. In addition, the drawing function is developed relying on Matlab, enriching the software functions of the off-line module. The result shows that the control system is running stably after repeated tests and practical operations for a long time.« less

Simulation and measurement of nanometer-scale resistivity of copper films for interconnect applications

NASA Astrophysics Data System (ADS)

Yarimbiyik, Arif Emre

2007-12-01

A highly versatile simulation program is developed and used to examine how the resistivity of thin metal films and lines increases as their dimensions approach and become smaller than the mean fee path of electrons in metals such as copper (size effect). The simulation program: (1) provides a more accurate calculation of surface scattering effects than that obtained from the usual formulation of Fuchs' theory, (2) calculates grain-boundary effects that are consistent with the theory of Mayadas and Shatzkes, (3) includes the effects of surface and grain-boundary scattering either separately or together, and (4) simulates the effect on resistivity if a surface of a film or line has a different value for the scattering parameter. The increase in resistivity with decreasing thickness of thin, evaporated copper films (approximately 10 nm to 150 nm thick) was determined from sheet resistance and film thickness measurements. Good agreement between the experimental results with those of the simulation program was obtained when the measured mean grain sizes were used by the simulation program. The mean of the grain sizes tend to decrease with decreasing film thickness and thereby increase the impact of grain-boundary scattering on the effective resistivity of the film. Estimates of the mean grain size for each film were determined from using, in combination, the electron backscatter diffraction (EBSD) and the X-ray diffraction (XRD) methods. With values for the measured change in sheet resistance with temperature of these films, it is shown that measurements of the electrical film thickness, using Matthiessen's rule, agreed to within 3 nm of the physical measurements (profilometer) of these films. Hence, Matthiessen's rule can continue to be used to measure the thickness of a copper film and, by inference, the cross-sectional area of a copper line for dimensions well below the mean free path of electrons in copper at room temperature (39 nm).

Healing, Mental Energy in the Physics Classroom: Energy Conceptions and Trust in Complementary and Alternative Medicine in Grade 10-12 Students

ERIC Educational Resources Information Center

Svedholm, Annika M.; Lindeman, Marjaana

2013-01-01

Lay conceptions of energy often conflict with scientific knowledge, hinder science learning and scientific literacy, and provide a basis for ungrounded beliefs. In a sample of Finnish upper secondary school students, energy was attributed with features of living and animate beings and thought of as a mental property. These ontologically confused…

25 CFR 224.88 - What must the Director do after receiving notice of a violation or breach from the tribe?

Code of Federal Regulations, 2010 CFR

2010-04-01

... receiving notice of a violation or breach from the tribe, the Director will: (a) Review the notice and... review of relevant records, including transactions and reports. (b) If the Director determines, after the investigation, that a violation or breach is not causing or will not cause imminent jeopardy to a physical trust...

77 FR 75239 - Self-Regulatory Organizations; NYSE Arca, Inc.; Order Approving a Proposed Rule Change, as...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-19

... SECURITIES AND EXCHANGE COMMISSION [Release No. 34-68430; File No. SR-NYSEArca-2012-111] Self-Regulatory Organizations; NYSE Arca, Inc.; Order Approving a Proposed Rule Change, as Modified by Amendment No. 1, To List and Trade Units of the Sprott Physical Platinum and Palladium Trust Pursuant to NYSE Arca Equities Rule 8.201 December 13, 2012. I...

25 CFR 224.137 - What must the Director do if a tribe's noncompliance has resulted in harm or the potential for...

Code of Federal Regulations, 2012 CFR

2012-04-01

... resulted in harm or the potential for harm to a physical trust asset? 224.137 Section 224.137 Indians... AGREEMENTS UNDER THE INDIAN TRIBAL ENERGY DEVELOPMENT AND SELF DETERMINATION ACT Periodic Reviews Noncompliance § 224.137 What must the Director do if a tribe's noncompliance has resulted in harm or the...

25 CFR 224.137 - What must the Director do if a tribe's noncompliance has resulted in harm or the potential for...

Code of Federal Regulations, 2014 CFR

2014-04-01

... resulted in harm or the potential for harm to a physical trust asset? 224.137 Section 224.137 Indians... AGREEMENTS UNDER THE INDIAN TRIBAL ENERGY DEVELOPMENT AND SELF DETERMINATION ACT Periodic Reviews Noncompliance § 224.137 What must the Director do if a tribe's noncompliance has resulted in harm or the...

25 CFR 224.137 - What must the Director do if a tribe's noncompliance has resulted in harm or the potential for...

Code of Federal Regulations, 2013 CFR

2013-04-01

... resulted in harm or the potential for harm to a physical trust asset? 224.137 Section 224.137 Indians... AGREEMENTS UNDER THE INDIAN TRIBAL ENERGY DEVELOPMENT AND SELF DETERMINATION ACT Periodic Reviews Noncompliance § 224.137 What must the Director do if a tribe's noncompliance has resulted in harm or the...

25 CFR 224.137 - What must the Director do if a tribe's noncompliance has resulted in harm or the potential for...

Code of Federal Regulations, 2011 CFR

2011-04-01

... resulted in harm or the potential for harm to a physical trust asset? 224.137 Section 224.137 Indians... AGREEMENTS UNDER THE INDIAN TRIBAL ENERGY DEVELOPMENT AND SELF DETERMINATION ACT Periodic Reviews Noncompliance § 224.137 What must the Director do if a tribe's noncompliance has resulted in harm or the...

High gradient tests of metallic mm-wave accelerating structures

DOE PAGES

Dal Forno, Massimo; Dolgashev, Valery; Bowden, Gordon; ...

2017-05-10

This study explores the physics of vacuum rf breakdowns in high gradient mm-wave accelerating structures. We performed a series of experiments with 100 GHz and 200 GHz metallic accelerating structures, at the Facility for Advanced Accelerator Experimental Tests (FACET) at the SLAC National Accelerator Laboratory. This paper presents the experimental results of rf tests of 100 GHz travelling-wave accelerating structures, made of hard copper-silver alloy. The results are compared with pure hard copper structures. The rf fields were excited by the FACET ultra-relativistic electron beam. The accelerating structures have open geometries, 10 cm long, composed of two halves separated bymore » a variable gap. The rf frequency of the fundamental accelerating mode depends on the gap size and can be changed from 90 GHz to 140 GHz. The measured frequency and pulse length are consistent with our simulations. When the beam travels off-axis, a deflecting field is induced in addition to the decelerating longitudinal field. We measured the deflecting forces by observing the displacement of the electron bunch and used this measurement to verify the expected accelerating gradient. We present the first quantitative measurement of rf breakdown rates in 100 GHz copper-silver accelerating structure, which was 10 –3 per pulse, with peak electric field of 0.42 GV/m, an accelerating gradient of 127 MV/m, at a pulse length of 2.3 ns. The goal of our studies is to understand the physics of gradient limitations in order to increase the energy reach of future accelerators.« less

High gradient tests of metallic mm-wave accelerating structures

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dal Forno, Massimo; Dolgashev, Valery; Bowden, Gordon

This study explores the physics of vacuum rf breakdowns in high gradient mm-wave accelerating structures. We performed a series of experiments with 100 GHz and 200 GHz metallic accelerating structures, at the Facility for Advanced Accelerator Experimental Tests (FACET) at the SLAC National Accelerator Laboratory. This paper presents the experimental results of rf tests of 100 GHz travelling-wave accelerating structures, made of hard copper-silver alloy. The results are compared with pure hard copper structures. The rf fields were excited by the FACET ultra-relativistic electron beam. The accelerating structures have open geometries, 10 cm long, composed of two halves separated bymore » a variable gap. The rf frequency of the fundamental accelerating mode depends on the gap size and can be changed from 90 GHz to 140 GHz. The measured frequency and pulse length are consistent with our simulations. When the beam travels off-axis, a deflecting field is induced in addition to the decelerating longitudinal field. We measured the deflecting forces by observing the displacement of the electron bunch and used this measurement to verify the expected accelerating gradient. We present the first quantitative measurement of rf breakdown rates in 100 GHz copper-silver accelerating structure, which was 10 –3 per pulse, with peak electric field of 0.42 GV/m, an accelerating gradient of 127 MV/m, at a pulse length of 2.3 ns. The goal of our studies is to understand the physics of gradient limitations in order to increase the energy reach of future accelerators.« less

The Need to Trust and to Trust More Wisely in Academe

ERIC Educational Resources Information Center

Bowman, Richard F.

2012-01-01

Where trust is an issue, there is no trust. Trust in diverse organizations has never been lower. A shadow of doubt stalks one's every decision to trust collegially and institutionally. Still, colleagues sense intuitively that institutions cannot function optimally without a bedrock level of trust. In academic life, trust is a form of social…

Trusting patients, trusting nurses.

PubMed

Sellman, Derek

2007-01-01

The general expectation that patients should be willing to trust nurses is rarely explored or challenged despite claims of diminishing public trust in social and professional institutions. Everyday meanings of trust take account of circumstance and suggest that our understanding of what it means to trust is contextually bound. However, in the context of health care, to trust implies a particular understanding which becomes apparent when abuses of this trust are reported and acknowledged as scandals. The predominant assumption in the literature that trust is something that occurs between equally competent adults cannot explain trust in nursing precisely because of the unequal power relationships between patients on the one hand and healthcare professionals on the other. Moreover, the tendency to conflate terms such as trust, reliance, confidence and so on suggests that confusion permeates discussions of trust in nursing. In this paper, I argue in support of Annette Baier's requirement of good will (or lack of ill will) as the essential feature of trust, and outline how this account (i) enables us to make the necessary distinctions between trust on the one hand and 'trust pretenders' on the other; and (ii) lays the foundations for understanding trust in relationships, such as those between patients and nurses, where power differentials exist.

Adequate trust avails, mistaken trust matters: on the moral responsibility of doctors as proxies for patients' trust in biobank research.

PubMed

Johnsson, Linus; Helgesson, Gert; Hansson, Mats G; Eriksson, Stefan

2013-11-01

In Sweden, most patients are recruited into biobank research by non-researcher doctors. Patients' trust in doctors may therefore be important to their willingness to participate. We suggest a model of trust that makes sense of such transitions of trust between domains and distinguishes adequate trust from mistaken trust. The unique position of doctors implies, we argue, a Kantian imperfect duty to compensate for patients' mistaken trust. There are at least three kinds of mistaken trust, each of which requires a different set of countermeasures. First, trust is mistaken when necessary competence is lacking; the competence must be developed or the illusion dispelled. Second, trust is irrational whenever the patient is mistaken about his actual reasons for trusting. Care must therefore be taken to support the patient's reasoning and moral agency. Third, some patients inappropriately trust doctors to recommend only research that will benefit them directly. Such trust should be counteracted by nurturing a culture where patients expect to be asked occasionally to contribute to the common good. © 2012 John Wiley & Sons Ltd.

Trust: the sublime duty in health care leadership.

PubMed

Piper, Llewellyn E

2010-01-01

Trust is the essence of human social existence. From the moment of birth, trust is the basic component in any human relationship and interaction. Trust is the Holy Grail for human confidence in others. From human survival to organizational survival, trust is the primordial bond. No organization is more dependent on trust than health care. This article views trust as the most basic fundamental quality for leadership. Trust is a sublime duty of a leader and the leadership of an organization. Leadership sets the culture of trust. Trust is the one quality that is essential for guiding an organization toward serving others. This article addresses trust from many perspectives. Trust is viewed from our subordinates, our peers, our superiors, and the public we serve. This article postulates how trust in an organization is the sublime duty of leadership that unites all human understanding and without it destroys all human relationships.

How does trust affect acceptance of a nuclear power plant (NPP): A survey among people living with Qinshan NPP in China

PubMed Central

Feldman, Marcus W.

2017-01-01

It is difficult to know whether different dimensions of trust have different effects on local residents’ acceptance of nuclear power plants (NPPs). In previous research such trust has been considered as a single dimensional concept. This paper divides trust into goodwill trust and competence trust, and we explore the ways in which trust affects acceptance of NPPs through structural equation modeling. A survey of 491 people was conducted in Haiyan County, China, where the Qinshan nuclear power plant is located. We find that goodwill trust is significantly correlated with competence trust, and each can indirectly promote residents’ acceptance of NPPs but by different paths. Goodwill trust improves acceptance of NPPs by decreasing risk perception, while competence trust improves acceptance of NPPs by increasing benefit perception. However, the associations between goodwill trust and benefit perception, competence trust and risk perception, are not significant. PMID:29176852

How does trust affect acceptance of a nuclear power plant (NPP): A survey among people living with Qinshan NPP in China.

PubMed

Xiao, Qunying; Liu, Huijun; Feldman, Marcus W

2017-01-01

It is difficult to know whether different dimensions of trust have different effects on local residents' acceptance of nuclear power plants (NPPs). In previous research such trust has been considered as a single dimensional concept. This paper divides trust into goodwill trust and competence trust, and we explore the ways in which trust affects acceptance of NPPs through structural equation modeling. A survey of 491 people was conducted in Haiyan County, China, where the Qinshan nuclear power plant is located. We find that goodwill trust is significantly correlated with competence trust, and each can indirectly promote residents' acceptance of NPPs but by different paths. Goodwill trust improves acceptance of NPPs by decreasing risk perception, while competence trust improves acceptance of NPPs by increasing benefit perception. However, the associations between goodwill trust and benefit perception, competence trust and risk perception, are not significant.

The reuse of treated wood

Treesearch

Robert L. Smith; David Bailey; Delton R. Alderman; Philip A. Araman

2006-01-01

The primary goals of this book chapter are to identify barriers to the reuse of treated lumber, to describe the physical properties of spent chromated copper arsenate (CCA)-treated lumber coming from residential decks and to identify potential products and markets that can use spent treated lumber. The primary focus will be on CCA-treated lumber because it has been the...

Enhancing in situ hydrogen peroxide generation of greige cotton nonwoven wound dressings via ascorbate stabilized copper micro- and nano-particles

USDA-ARS?s Scientific Manuscript database

Understanding how wound dressings may be designed to address critical unsolved issues in wound repair and treatment influences the development of dressings and new concepts of promoting healing. The vast majority of commercial dressing materials focus on the physical aspects of wounds, e.g., acting ...

75 FR 67258 - Position Reports for Physical Commodity Swaps

Federal Register 2010, 2011, 2012, 2013, 2014

2010-11-02

... Cattle. CME Milk Class III. Comex (``CMX'') Copper Grade 1. CMX Gold. CMX Silver. ICE Futures US (``ICUS... Oats. CME Butter. CME Cheese. CME Dry Whey. CME Hardwood Pulp. CME Lean Hogs. CME Non Fat Dry Milk. CME... contract--The ICE WTI Average Price Option is indirectly linked to a 20.2 listed futures contract because...

Lenz's Law Demonstration Using an Ultrasound Position Sensor

ERIC Educational Resources Information Center

Fodor, Petru S.; Peppard, Tara

2012-01-01

One of the very popular demonstrations used in introductory physics courses to illustrate Lenz's law is the "slowly falling magnet." In its simplest version it requires only a powerful cylindrical magnet and a metal tube, typically of copper or aluminum. When dropped in the tube the magnet takes significantly longer to reach the other end than a…

“You Always End up Feeling Like You’re Some Hypochondriac”: Intimate Partner Violence Survivors’ Experiences Addressing Depression and Pain

PubMed Central

Gregg, Jessica; Galian, Hilary; McFarland, Bentson; Curry, MaryAnn; Gerrity, Martha

2008-01-01

Objective Little is known regarding how providers should use information about intimate partner violence (IPV) to care for depressed patients. Our objective was to explore what depressed IPV survivors believe about the relationship between abuse, mental health, and physical symptoms and to elicit their recommendations for addressing depression. Design Focus group study. Patients/Participants Adult, English-speaking, female, Internal Medicine clinic patients with depressive symptoms and a history of IPV. Interventions Thematic analysis using an inductive approach (consistent with grounded theory), at a semantic level, with an essentialist paradigm. Measurements and Main Results Twenty three women participated in 5 focus groups. Although selected because of their depression, participants often felt their greatest concerns were physical. They acknowledged that their abuse history, depression, and physical complaints compound each other. They appreciated the need for health care workers to know about their depression and IPV history to get a “full picture” of their health, but they were often hesitant to discuss such issues with providers because of their fear that such information would make providers think their symptoms were “all in their head” or would encourage providers to discount their pain. Participants discussed difficulties related to trust and control in relationships with providers and gave recommendations as to how providers can earn their trust. Conclusions Understanding a patient’s IPV history may allow providers to develop a better therapeutic relationship. To treat depression adequately, it is important for providers to reassure patients that they believe their physical symptoms; to communicate respect for patients’ intelligence, experience, and complexity; and to share control. Electronic supplementary material The online version of this article (doi:10.1007/s11606-008-0606-0) contains supplementary material, which is available to authorized users. PMID:18443884

The Need to Objectively Measure Physical Activity During Pregnancy: Considerations for Clinical Research and Public Health Impact.

PubMed

Guérin, Eva; Ferraro, Zachary M; Adamo, Kristi B; Prud'homme, Denis

2018-05-01

Engaging in recommended levels of physical activity during pregnancy can provide a host of physical and mental health benefits for the expecting mother and her child. However, methodological issues related to physical activity measurement have plagued many studies examining the effects of physical activity during this important life stage. Burgeoning support exists for the more widespread use of objective methods, and accelerometers specifically, for an accurate appraisal of maternal physical activity. In this commentary, we highlight discrepancies between activity estimates obtained via self-report and objective measures and describe the implications of erroneous measurement when making clinical recommendations and in conducting future physical activity and pregnancy research. Most importantly, we aim to foster academic discussion and propose a call to action requiring a paradigm shift where we acknowledge the shortcomings of self-report and move toward an empirically driven approach for physical activity measurement. Results from more high-quality research studies will help support public health messaging and facilitate trust among health care providers, clinical researchers, and expecting mothers regarding the health benefits of physical activity recommendations.

The Role of Trust in Information Science and Technology.

ERIC Educational Resources Information Center

Marsh, Stephen; Dibben, Mark R.

2003-01-01

Discusses the notion of trust as it relates to information science and technology, specifically user interfaces, autonomous agents, and information systems. Highlights include theoretical meaning of trust; trust and levels of analysis, including organizational trust; electronic commerce, user interfaces, and static trust; dynamic trust; and trust…

Comparison of copper heptonate with copper oxide wire particles as copper supplements for sheep on pasture of high molybdenum content.

PubMed

Judson, G J; Babidge, P J

2002-10-01

To assess the effectiveness of intramuscular injection of copper heptonate (CuHep) and an oral dose of copper oxide wire particles (COWP) in preventing Cu inadequacy in adult and young sheep on pasture of high Mo content. Field experiments with flocks of mature Merino wethers and crossbred weaners. Adult wethers were given 25 or 37.5 mg Cu as CuHep, 2.5 g COWP or no Cu treatment. The weaners were given 12.5 or 25 mg Cu as CuHep, 1.25 g COWP or no Cu treatment. At intervals over the next 12 (adults) or 8 (weaners) months the sheep were weighed and samples of blood and liver were collected for trace element assay. Wool samples collected from the adults at the end of the experiment were assessed for physical characteristics. The higher dosage of CuHep raised liver Cu above control group values for at least 9 months in adults and 3 months in weaners. The lower dosage of CuHep was similarly effective for 3 months in adults but was without effect in weaners. In adults the response to COWP matched that to the higher dosage of CuHep; in weaners it was greater, lasting at least 5 months. No changes indicative of Cu deficiency, apart from a depressed body weight in adults, were seen. In sheep on pasture of high Mo content a single intramuscular injection of CuHep providing 37.5 mg Cu to adults or 25 mg Cu to weaners will raise liver Cu reserves for at least 9 and 3 months respectively and may be an acceptable alternative to COWP for preventing seasonal Cu deficiency in sheep in southern Australia.

Microstructural characterization of ultra thin copper interconnects

NASA Astrophysics Data System (ADS)

Yang, Hee-Dong

The present study investigates the defects related to reliability issues, such as physical failures developed during processing and end use. In the first part of this study, kinetic analysis using the Johnson-Mehl-Avrami (JMA) model demonstrates that a self-annealing mechanism in electroplated Cu films depends on the film properties, such as thickness and the amount of crystal defects in an as-deposited state. In order to obtain the evidence of such defects, the microstructural characterization of defects in ultra thin copper interconnects using transmission electron microscopy (TEM) is presented. Examination of the defects using TEM reveals that voids filled with gas form as a lens shape along the {110} habit planes of the copper matrix. In the second part of this study, methodology and results of an electro-thermal-fatigue (ETF) testing, designed for early detection of process defects, are presented. Such ETF testing combines high-density current electrical stressing and thermal cycling to accelerate the evolution of defects in Cu interconnects. In ETF testing, the evolution of defects provides the nucleation sites for voids which open or close during thermal cycling. Then, the accumulation of voids creates the change in resistance when they reach a critical size. As a result of voids evolution, the high current density and high joule heating create a transient resistance increase. ETF testing reveals two failure modes, and the mode-I failure has the importance in detecting defects. The number of cycles to failure in ETF testing decreases with higher current density, but the rate of thermal cycling has no effect. Results from this investigation suggest that impurities in the copper electrodeposition process must be carefully controlled to achieve reliable ultra thin copper interconnects.

The relationship between trust in mass media and the healthcare system and individual health: evidence from the AsiaBarometer Survey

PubMed Central

Tokuda, Yasuharu; Fujii, Seiji; Jimba, Masamine; Inoguchi, Takashi

2009-01-01

Background Vertical and horizontal trust, as dimensions of social capital, may be important determinants of health. As mass media campaigns have been used extensively to promote healthy lifestyles and convey health-related information, high levels of individual trust in the media may facilitate the success of such campaigns and, hence, have a positive influence on health. However, few studies have investigated the relationship between trust levels in mass media, an aspect of vertical trust, and health. Methods Based on cross-sectional data of the general population from the AsiaBarometer Survey (2003–2006), we analyzed the relationship between self-rated health and trust in mass media, using a multilevel logistic model, adjusted for age, gender, marital status, income, education, occupation, horizontal trust, and trust in the healthcare system. Results In a total of 39082 participants (mean age 38; 49% male), 26808 (69%) were classified as in good health. By the levels of trust in mass media, there were 6399 (16%) who reported that they trust a lot, 16327 (42%) reporting trust to a degree, 9838 (25%) who do not really trust, 3307 (9%) who do not trust at all, and 191 (0.5%) who have not thought about it. In the multilevel model, trust in mass media was associated with good health (do not trust at all as the base group): the odds ratios (OR) of 1.16 (95% confidence interval (CI) = 1.05–1.27) for do not really trust; OR of 1.35 (95% CI = 1.23–1.49) for trust to a degree, and 1.57 (95% CI = 1.36–1.81) for trust a lot. Horizontal trust and trust in the healthcare system were also associated with health. Conclusion Vertical trust in mass media is associated with better health in Asian people. Since mass media is likely an important arena for public health, media trust should be enhanced to make people healthier. PMID:19161600

78 FR 53509 - Self-Regulatory Organizations; BATS Exchange, Inc.; Order Approving a Proposed Rule Change, as...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-29

... for the following securities: Index-Linked Exchangeable Notes; Equity Gold Shares; Trust Certificates; Commodity-Based Trust Shares; Currency Trust Shares; Commodity Index Trust Shares; Commodity Futures Trust Shares; Partnership Units; Trust Units; Managed Trust Securities; and Currency Warrants (together with...

Integrated Social and Quality of Service Trust Management of Mobile Groups in Ad Hoc Networks

DTIC Science & Technology

2013-01-01

high resiliency to malicious attacks and misbehaving nodes. Keywords—trust management; mobile ad hoc networks; QoS trust; social trust; trust...paper we address an importance issue of trust management protocol design for MANETs: trust bias minimization despite misbehaving nodes performing

78 FR 43251 - Grosvenor Alternative Funds Master Trust, et al.; Notice of Application

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-19

... Alternative Funds Master Trust, et al.; Notice of Application July 15, 2013. AGENCY: Securities and Exchange... Alternative Funds Master Trust (``Master Trust''), Grosvenor Alternative Funds (``GAF Trust''), and Grosvenor... calling (202) 551-8090. Applicants' Representations 1. The Master Trust \\1\\ and the GAF Trust...

78 FR 34410 - First Trust Exchange-Traded Fund, et al.; Notice of Application

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-07

...] First Trust Exchange-Traded Fund, et al.; Notice of Application June 3, 2013. AGENCY: Securities and... disclosure requirements. Applicants: First Trust Exchange-Traded Fund, First Trust Exchange- Traded Fund II, First Trust Exchange-Traded Fund III, First Trust Exchange-Traded Fund IV, First Trust Exchange-Traded...

Four Essential Practices for Building Trust

ERIC Educational Resources Information Center

Combs, Julie Peterson; Harris, Sandra; Edmonson, Stacey

2015-01-01

The presence of trust can enhance an organization's efforts to fulfill its mission, and the lack of trust can constrict those efforts. The authors offer four essential guidelines to help school leaders communicate in a way that builds trust. Build trust by understanding trust. Trusted leaders demonstrate care, character, and competence in their…

In Healthy Young Men, a Short Exhaustive Exercise Alters the Oxidative Stress Only Slightly, Independent of the Actual Fitness

PubMed Central

Finkler, Maya; Hochman, Ayala; Pinchuk, Ilya; Lichtenberg, Dov

2016-01-01

The aim of the present study was to evaluate the apparent disagreement regarding the effect of a typical cycling progressive exercise, commonly used to assess VO2max, on the kinetics of ex vivo copper induced peroxidation of serum lipids. Thirty-two (32) healthy young men, aged 24–30 years, who do not smoke and do not take any food supplements, participated in the study. Blood was withdrawn from each participant at three time points (before the exercise and 5 minutes and one hour after exercise). Copper induced peroxidation of sera made of the blood samples was monitored by spectrophotometry. For comparison, we also assayed TBARS concentration and the activity of oxidation-related enzymes. The physical exercise resulted in a slight and reversible increase of TBARS and slight changes in the activities of the studied antioxidant enzymes and the lag preceding peroxidation did not change substantially. Most altered parameters returned to baseline level one hour after exercise. Notably, the exercise-induced changes in OS did not correlate with the physical fitness of the subjects, as evaluated in this study (VO2max = 30–60 mL/min/kg). We conclude that in healthy young fit men a short exhaustive exercise alters only slightly the OS, independent of the actual physical fitness. PMID:26989456

Impact of recycling on cradle-to-gate energy consumption and greenhouse gas emissions of automotive lithium-ion batteries.

PubMed

Dunn, Jennifer B; Gaines, Linda; Sullivan, John; Wang, Michael Q

2012-11-20

This paper addresses the environmental burdens (energy consumption and air emissions, including greenhouse gases, GHGs) of the material production, assembly, and recycling of automotive lithium-ion batteries in hybrid electric, plug-in hybrid electric, and battery electric vehicles (BEV) that use LiMn(2)O(4) cathode material. In this analysis, we calculated the energy consumed and air emissions generated when recovering LiMn(2)O(4), aluminum, and copper in three recycling processes (hydrometallurgical, intermediate physical, and direct physical recycling) and examined the effect(s) of closed-loop recycling on environmental impacts of battery production. We aimed to develop a U.S.-specific analysis of lithium-ion battery production and in particular sought to resolve literature discrepancies concerning energy consumed during battery assembly. Our analysis takes a process-level (versus a top-down) approach. For a battery used in a BEV, we estimated cradle-to-gate energy and GHG emissions of 75 MJ/kg battery and 5.1 kg CO(2)e/kg battery, respectively. Battery assembly consumes only 6% of this total energy. These results are significantly less than reported in studies that take a top-down approach. We further estimate that direct physical recycling of LiMn(2)O(4), aluminum, and copper in a closed-loop scenario can reduce energy consumption during material production by up to 48%.

The Types of Trust Involved in American Muslim Healthcare Decisions: An Exploratory Qualitative Study.

PubMed

Padela, Aasim I; Pruitt, Liese; Mallick, Saleha

2017-08-01

Trust in physicians and the healthcare system underlies some disparities noted among minority populations, yet a descriptive typology of different types of trust informing healthcare decisions among minority populations is limited. Using data from 13 focus groups with 102 American Muslims, we identified the types and influence of trust in healthcare decision-making. Participants conveyed four types of trust implicating their health-seeking behaviors-(I) trust in allopathic medicine, (II) trust in God, (III) trust in personal relationships, and (IV) trust in self. Healthcare disparity research can benefit from assessing how these types of trust are associated with health outcomes among minority populations so as to inform intervention programs that seek to enhance trust as a means to improve community health.

Institutional shelter to protect adolescent victims of domestic violence: theory or practice?

PubMed

Carlos, Diene Monique; Ferriani, Maria das Graças Carvalho; Silva, Marta Angelica Iossi; Roque, Eliana Mendes de Souza Teixeira; Vendruscolo, Telma Sanchez

2013-01-01

To understand and analyze, from the perspective of adolescent victims of domestic violence who were cared for in an institution in Campinas-SP, the protective factors to which they are submitted and / or have access. This was qualitative research, with data collection occurring through focus groups with 17 adolescents, and semistructured interviews with seven of them; the data analysis was based on content analysis, using a thematic modality. Two themes emerged, entitled Four Walls and Trust. We discuss the context of institutional care, that despite the efforts made contemporaneously, still maintains an authoritarian environment; the importance of the bond and trust established with some employees, acting as protective factors for the adolescents and the protective aspect of religiosity. It is understood that these considerations should be valued and reinforced through the healthcare services provided to children and adolescents, as they contribute to the promotion of the physical and mental health of this population.

The HEPiX Virtualisation Working Group: Towards a Grid of Clouds

NASA Astrophysics Data System (ADS)

Cass, Tony

2012-12-01

The use of virtual machine images, as for example with Cloud services such as Amazon's Elastic Compute Cloud, is attractive for users as they have a guaranteed execution environment, something that cannot today be provided across sites participating in computing grids such as the Worldwide LHC Computing Grid. However, Grid sites often operate within computer security frameworks which preclude the use of remotely generated images. The HEPiX Virtualisation Working Group was setup with the objective to enable use of remotely generated virtual machine images at Grid sites and, to this end, has introduced the idea of trusted virtual machine images which are guaranteed to be secure and configurable by sites such that security policy commitments can be met. This paper describes the requirements and details of these trusted virtual machine images and presents a model for their use to facilitate the integration of Grid- and Cloud-based computing environments for High Energy Physics.

From the general to the specific: How social trust motivates relational trust.

PubMed

Robbins, Blaine G

2016-01-01

When people form beliefs about the trustworthiness of others with respect to particular matters (i.e., when individuals trust), theory suggests that they rely on preexistent cognitive schemas regarding the general cooperativeness of individuals and organizations (i.e., social trust). In spite of prior work, the impact of social trust on relational trust-or what Russell Hardin (2002) calls trust as a three-part relation where actor A trusts actor B with reference to matter Y-is not well established. Four vignette experiments were administered to Amazon.com Mechanical Turk workers (N = 1388 and N = 1419) and to public university undergraduate students (N = 995 and N = 956) in order to investigate the relationship between social trust and relational trust. Measures of general social trust and particular social trust produced statistically equivalent effects that were positively associated with relational trust. Political trust, however, was statistically unrelated to relational trust. These results support the idea that people rely on schemas and stereotypes concerned with the general cooperativeness and helpfulness of others when forming beliefs about another person's trustworthiness with respect to a particular matter at hand. Copyright © 2015 Elsevier Inc. All rights reserved.

Pharmacological Role of Anions (Sulphate, Nitrate, Oxalate and Acetate) on the Antibacterial Activity of Cobalt(II), Copper(II) and Nickel(II) Complexes With Nicotinoylhydrazine-Derived ONO, NNO and SNO Ligands

PubMed Central

Rauf, Abdur

1996-01-01

Mixed ligands biologically active complexes of cobalt(II), copper(II) and nickel(II) with nicotinoylhydrazine-derived ONO, NNO and SNO donor schiff-base ligands having the same metal ion but different anions such as sulphate, nitrate, oxalate and acetate have been synthesised and characterised on the basis of their physical, analytical and spectral data. In order to evaluate the role of anions on their bioability, these ligands and their synthesised metal complexes with various anions have been screened against bacterial species such as Escherichia coli, Pseudomonas aeruginosa and Staphylococcus aureus and the title studies have proved a definative role of anions in increasing the biological activity PMID:18472896

RF design for the TOPGUN photogun: A cryogenic normal conducting copper electron gun

DOE PAGES

Cahill, A. D.; Fukasawa, A.; Pakter, R.; ...

2016-08-31

Some recent studies of rf breakdown physics in cryogenic copper X-band accelerating structures have shown a dramatic increase in the operating gradient while maintaining low breakdown rates. The TOPGUN project, a collaboration between UCLA, SLAC, and INFN, will use this improvement in gradient to create an ultra-high brightness cryogenic normal conducting photoinjector [16]. The brightness is expected to be higher by a factor of 25 relative to the LCLS photogun [9]. This improvement in the brightness will lead to increased performance of X-Ray free electron lasers (FELs) and ultrafast electron diffraction devices [16]. Here, we present the rf design formore » this S-band photogun, which will be a drop-in replacement for the current LCLS photogun.« less

Method and apparatus for the management of hazardous waste material

DOEpatents

Murray, H. Jr.

1995-02-21

A container for storing hazardous waste material, particularly radioactive waste material, consists of a cylindrical body and lid of precipitation hardened C17510 beryllium-copper alloy, and a channel formed between the mated lid and body for receiving weld filler material of C17200 copper-beryllium alloy. The weld filler material has a precipitation hardening temperature lower than the aging kinetic temperature of the material of the body and lid, whereby the weld filler material is post weld heat treated for obtaining a weld having substantially the same physical, thermal, and electrical characteristics as the material of the body and lid. A mechanical seal assembly is located between an interior shoulder of the body and the bottom of the lid for providing a vacuum seal. 40 figs.

Physics-based simulation of EM and SM in TSV-based 3D IC structures

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kteyan, Armen; Sukharev, Valeriy; Zschech, Ehrenfried

2014-06-19

Evolution of stresses in through-silicon-vias (TSVs) and in the TSV landing pad due to the stress migration (SM) and electromigration (EM) phenomena are considered. It is shown that an initial stress distribution existing in a TSV depends on its architecture and copper fill technology. We demonstrate that in the case of proper copper annealing the SM-induced redistribution of atoms results in uniform distributions of the hydrostatic stress and concentration of vacancies along each segment. In this case, applied EM stressing generates atom migration that is characterized by kinetics depending on the preexisting equilibrium concentration of vacancies. Stress-induced voiding in TSVmore » is considered. EM induced voiding in TSV landing pad is analyzed in details.« less

Trust and Influence

DTIC Science & Technology

2012-03-05

DISTRIBUTION A: Approved for public release; distribution is unlimited. Program Trends •Trust in Autonomous Systems • Cross - cultural Trust...Trust & trustworthiness are independent (Mayer et al, 1995) •Trust is relational •Humans in cross - cultural interactions •Complex human-machine...Interpersonal Trustworthiness •Ability •Benevolence •Integrity Trust Metrics Cross - Cultural Trust Issues Human-Machine Interactions Autonomous

77 FR 45381 - Cash Account Trust, et al.; Notice of Application

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-31

..., DWS Market Trust, DWS Money Funds, DWS Money Market Trust, DWS Municipal Trust, DWS Portfolio Trust, DWS Securities Trust, DWS State Tax-Free Income Series, DWS Target Date Series, DWS Target Fund, DWS Tax Free Trust, DWS Value Series, Inc., DWS Variable Series I, DWS Variable Series II, Investors Cash...

Managing healthcare information: analyzing trust.

PubMed

Söderström, Eva; Eriksson, Nomie; Åhlfeldt, Rose-Mharie

2016-08-08

Purpose - The purpose of this paper is to analyze two case studies with a trust matrix tool, to identify trust issues related to electronic health records. Design/methodology/approach - A qualitative research approach is applied using two case studies. The data analysis of these studies generated a problem list, which was mapped to a trust matrix. Findings - Results demonstrate flaws in current practices and point to achieving balance between organizational, person and technology trust perspectives. The analysis revealed three challenge areas, to: achieve higher trust in patient-focussed healthcare; improve communication between patients and healthcare professionals; and establish clear terminology. By taking trust into account, a more holistic perspective on healthcare can be achieved, where trust can be obtained and optimized. Research limitations/implications - A trust matrix is tested and shown to identify trust problems on different levels and relating to trusting beliefs. Future research should elaborate and more fully address issues within three identified challenge areas. Practical implications - The trust matrix's usefulness as a tool for organizations to analyze trust problems and issues is demonstrated. Originality/value - Healthcare trust issues are captured to a greater extent and from previously unchartered perspectives.

Attracting Girls Into Physics

NASA Astrophysics Data System (ADS)

Hosny, Hala M.; Kahil, Heba M.

2005-10-01

From our national statistics, it is evident that in the population of physicists there are considerably fewer women than men. Our role is to attract girls to physics and thus decrease this gap. The institutional structure in Egypt provides an equal opportunity for girls to study sciences, including physics. It is reckoned that girls refrain from studying physics due to a group of social and economic factors. We will discuss teaching physics at schools and present some ideas to develop it. The media should play a role in placing female physicists in the spotlight. Unfortunately, careers that require intellectual skills are considered men's careers. This necessitates that society changes the way it sees women and trusts more in their skills and talents. We therefore call for the cooperation of governmental and nongovernmental bodies, together with universities and the production sectors involved. This will ultimately lead to enhancing the entrepreneurial projects related to physics and technology on the one hand, and will encourage girls to find challenging opportunities on the other.

Explaining the justice-performance relationship: trust as exchange deepener or trust as uncertainty reducer?

PubMed

Colquitt, Jason A; Lepine, Jeffery A; Piccolo, Ronald F; Zapata, Cindy P; Rich, Bruce L

2012-01-01

Past research has revealed significant relationships between organizational justice dimensions and job performance, and trust is thought to be one mediator of those relationships. However, trust has been positioned in justice theorizing in 2 different ways, either as an indicator of the depth of an exchange relationship or as a variable that reflects levels of work-related uncertainty. Moreover, trust scholars distinguish between multiple forms of trust, including affect- and cognition-based trust, and it remains unclear which form is most relevant to justice effects. To explore these issues, we built and tested a more comprehensive model of trust mediation in which procedural, interpersonal, and distributive justice predicted affect- and cognition-based trust, with those trust forms predicting both exchange- and uncertainty-based mechanisms. The results of a field study in a hospital system revealed that the trust variables did indeed mediate the relationships between the organizational justice dimensions and job performance, with affect-based trust driving exchange-based mediation and cognition-based trust driving uncertainty-based mediation.

Risk perception of heat waves and its spatial variation in Nanjing, China

NASA Astrophysics Data System (ADS)

Huang, Lei; Yang, Qianqi; Li, Jie; Chen, Jin; He, Ruoying; Zhang, Can; Chen, Kai; Dong, Steven Guanpeng; Liu, Yang

2018-05-01

The intensity, frequency, and duration of heat waves are expected to increase with climate change. In this study, we found a significant difference of public perceived effects of heat waves and trust in government among urban, suburban, and rural districts. Rural residents had a significant higher effect perception than urbanites and also showed stronger willingness to have medical insurance or regular physical examinations. Meanwhile, suburban residents had the lowest trust perception in government among these three districts, which may be due to suburban districts' unique social structure and complex social issues. Besides, we assessed the relationship between the factor effect and demographic variables. The results showed that urban respondents' effect perception was significantly related to heat wave experiences. Suburban respondents' effect perception was significantly related to age, income, and heat wave experiences. And rural respondents' effect perception was significantly related to income and chronic diseases. Based on our results, much more attention needs to be paid to rural districts. The government should strengthen infrastructure construction such as cooling centers, improve emergency response plans and mechanisms, and increase reserves of emergency supplies in rural districts. Also, targeted risk communication is of the equal importance to aid the policy-makers improving the relationship with the public and regaining the public's trust and support.

Risk perception of heat waves and its spatial variation in Nanjing, China.

PubMed

Huang, Lei; Yang, Qianqi; Li, Jie; Chen, Jin; He, Ruoying; Zhang, Can; Chen, Kai; Dong, Steven Guanpeng; Liu, Yang

2018-05-01

The intensity, frequency, and duration of heat waves are expected to increase with climate change. In this study, we found a significant difference of public perceived effects of heat waves and trust in government among urban, suburban, and rural districts. Rural residents had a significant higher effect perception than urbanites and also showed stronger willingness to have medical insurance or regular physical examinations. Meanwhile, suburban residents had the lowest trust perception in government among these three districts, which may be due to suburban districts' unique social structure and complex social issues. Besides, we assessed the relationship between the factor effect and demographic variables. The results showed that urban respondents' effect perception was significantly related to heat wave experiences. Suburban respondents' effect perception was significantly related to age, income, and heat wave experiences. And rural respondents' effect perception was significantly related to income and chronic diseases. Based on our results, much more attention needs to be paid to rural districts. The government should strengthen infrastructure construction such as cooling centers, improve emergency response plans and mechanisms, and increase reserves of emergency supplies in rural districts. Also, targeted risk communication is of the equal importance to aid the policy-makers improving the relationship with the public and regaining the public's trust and support.

Risk perception of heat waves and its spatial variation in Nanjing, China

NASA Astrophysics Data System (ADS)

Huang, Lei; Yang, Qianqi; Li, Jie; Chen, Jin; He, Ruoying; Zhang, Can; Chen, Kai; Dong, Steven Guanpeng; Liu, Yang

2017-12-01

The intensity, frequency, and duration of heat waves are expected to increase with climate change. In this study, we found a significant difference of public perceived effects of heat waves and trust in government among urban, suburban, and rural districts. Rural residents had a significant higher effect perception than urbanites and also showed stronger willingness to have medical insurance or regular physical examinations. Meanwhile, suburban residents had the lowest trust perception in government among these three districts, which may be due to suburban districts' unique social structure and complex social issues. Besides, we assessed the relationship between the factor effect and demographic variables. The results showed that urban respondents' effect perception was significantly related to heat wave experiences. Suburban respondents' effect perception was significantly related to age, income, and heat wave experiences. And rural respondents' effect perception was significantly related to income and chronic diseases. Based on our results, much more attention needs to be paid to rural districts. The government should strengthen infrastructure construction such as cooling centers, improve emergency response plans and mechanisms, and increase reserves of emergency supplies in rural districts. Also, targeted risk communication is of the equal importance to aid the policy-makers improving the relationship with the public and regaining the public's trust and support.

Impact of signals and experience on trust and trusting behavior.

PubMed

Chen, Ying-Hueih; Chien, Shu-Hua; Wu, Jyh-Jeng; Tsai, Pei-Yin

2010-10-01

Trust is an essential factor that drives virtual interaction and transactions on the Internet. Researchers have investigated the trust development process, and identified several important factors that form the basis for trust. This research combines the signal perspective and trust theory to examine the impact of market signals and past experience on trust formation and trusting behavior. Three market signals, including brand image, Web-site investment, and privacy policies, are identified and empirically tested to determine their impact on consumer trust. Based on 322 active Web users, the quantitative results suggest that brand image, Web-site investment, privacy policies, and past experience all positively impact trust formation. Furthermore, trust shows a positive effect on Web-site stickiness. Both theoretical and practical implications of the results are also offered.

Trust in automation: integrating empirical evidence on factors that influence trust.

PubMed

Hoff, Kevin Anthony; Bashir, Masooda

2015-05-01

We systematically review recent empirical research on factors that influence trust in automation to present a three-layered trust model that synthesizes existing knowledge. Much of the existing research on factors that guide human-automation interaction is centered around trust, a variable that often determines the willingness of human operators to rely on automation. Studies have utilized a variety of different automated systems in diverse experimental paradigms to identify factors that impact operators' trust. We performed a systematic review of empirical research on trust in automation from January 2002 to June 2013. Papers were deemed eligible only if they reported the results of a human-subjects experiment in which humans interacted with an automated system in order to achieve a goal. Additionally, a relationship between trust (or a trust-related behavior) and another variable had to be measured. All together, 101 total papers, containing 127 eligible studies, were included in the review. Our analysis revealed three layers of variability in human-automation trust (dispositional trust, situational trust, and learned trust), which we organize into a model. We propose design recommendations for creating trustworthy automation and identify environmental conditions that can affect the strength of the relationship between trust and reliance. Future research directions are also discussed for each layer of trust. Our three-layered trust model provides a new lens for conceptualizing the variability of trust in automation. Its structure can be applied to help guide future research and develop training interventions and design procedures that encourage appropriate trust. © 2014, Human Factors and Ergonomics Society.

77 FR 16873 - First Trust Exchange-Traded Fund, et al.; Notice of Application

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-22

...] First Trust Exchange-Traded Fund, et al.; Notice of Application March 15, 2012. AGENCY: Securities and... exemption from sections 17(a)(1) and (a)(2) of the Act. Applicants: First Trust Exchange-Traded Fund (the ``Initial Trust''), First Trust Exchange-Traded Fund II (``Trust II''), First Trust Exchange-Traded Fund III...

The Relationship between Collective Student Trust and Student Achievement

ERIC Educational Resources Information Center

Casper, David Carl

2012-01-01

The relationship between collective student trust and student achievement was tested in a sample of 1,748 5th grade students in 34 Title I elementary schools in an urban and urban fringe district. Trust was defined, the conditions of trust described, and the facets of trust discussed. Collective trust was distinguished from relational trust and…

New information and social trust: asymmetry and perseverance of attributions about hazard managers.

PubMed

Cvetkovich, George; Siegrist, Michael; Murray, Rachel; Tragesser, Sarah

2002-04-01

It has been argued that news about negative events has a much stronger effect on decreasing social trust than does news about positive events on increasing it. This asymmetry principle of trust was investigated in two surveys that also investigated the perseverance of trust. The possibility that established trust attributions persevere in the face of new information raises questions about the limits of trust asymmetry. The two studies yielded evidence that both type of news (good versus bad) and initial general trust in the nuclear power industry or the food supply industry affected level of trust. Compared to individuals trusting the industry, those distrusting the industry exhibited less trust following both bad and good news events. Study I also found that judged informativeness and judged positiveness of news events were affected by type of news and general trust of the industry. Individuals low in general trust of the nuclear power industry judged both bad news and good news as less positive than did those high in general trust. Those low in general trust judged bad news as more informative than good news and than did those high in general trust. An important implication of the perseverance of trust is to focus attention on including not only the effects of information about specific events and actions, but also on the judgment processes underlying social trust. The Salient Value Similarity model is suggested as one way of accounting for these psychological processes.

JPRS Report, Soviet Union, USA: Economics, Politics, Ideology, No. 7, Jul 1987

DTIC Science & Technology

1988-02-02

their aid, suggesting the use of ESOP- engen - dered employee stock ownership trusts for the purchase of the companies. Because the previously...pulp and paper and timber industries, medicine, and light industry, chemicals for agriculture, means of mon- itoring the state of the environment, etc...launched for the resolution of engineering problems and around 30 percent were financing research in physics, mathematics, and biology.16 Chemical and

X-ray Intermolecular Structure Factor (XISF): separation of intra- and intermolecular interactions from total X-ray scattering data

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mou, Q.; Benmore, C. J.; Yarger, J. L.

2015-06-01

XISF is a MATLAB program developed to separate intermolecular structure factors from total X-ray scattering structure factors for molecular liquids and amorphous solids. The program is built on a trust-region-reflective optimization routine with the r.m.s. deviations of atoms physically constrained. XISF has been optimized for performance and can separate intermolecular structure factors of complex molecules.

X-ray Intermolecular Structure Factor ( XISF ): separation of intra- and intermolecular interactions from total X-ray scattering data

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mou, Q.; Benmore, C. J.; Yarger, J. L.

2015-05-09

XISFis a MATLAB program developed to separate intermolecular structure factors from total X-ray scattering structure factors for molecular liquids and amorphous solids. The program is built on a trust-region-reflective optimization routine with the r.m.s. deviations of atoms physically constrained.XISFhas been optimized for performance and can separate intermolecular structure factors of complex molecules.

Preliminary evidence that sub-chronic citalopram triggers the re-evaluation of value in intimate partnerships

PubMed Central

Bilderbeck, Amy C.; Wakeley, Judi; Godlewska, Beata R.; McGlone, Francis; Harris, Tirril; Cowen, Phillip J.

2014-01-01

Depression frequently involves disrupted inter-personal relationships, while treatment with serotonergic anti-depressants can interfere with libido and sexual function. However, little is known about how serotonin activity influences appraisals of intimate partnerships. Learning more could help to specify how serotonergic mechanisms mediate social isolation in psychiatric illness. Forty-four healthy heterosexual adults, currently in romantic relationships, received 8 days treatment with the selective serotonin re-uptake inhibitor citalopram (N = 21; 10 male) or placebo (N = 23; 12 male). Participants viewed photographs of unknown, heterosexual couples and made a series of judgements about their relationships. Participants also indicated the importance of relationship features in their own close partnerships, and close partnerships generally. Citalopram reduced the rated quality of couples’ physical relationships and the importance attributed to physical and intimate aspects of participants’ own relationships. In contrast, citalopram also enhanced the evaluated worth of mutual trust in relationships. Amongst males, citalopram was associated with judgements of reduced turbulence and bickering in others’ relationships, and increased male dominance. These data constitute preliminary evidence that enhancing serotonin activity modulates cognitions about sexual activity as part of a re-appraisal of sources of value within close intimate relationships, enhancing the judged importance of longer-term benefits of trust and shared experiences. PMID:23996287

Coniunctio--in bodily and psychic modes: dissociation, devitalization and integration in a case of chronic fatigue syndrome.

PubMed

Holland, P

1997-04-01

Three years of analytical psychotherapy with a professional woman in mid-life, suffering from chronic fatigue syndrome (CFS), is described. Gradual recovery merged into mid-life changes; marriage, along with a new balance of maternal and paternal imagos, enabled her to trust enough to become pregnant-coniunctio in the most primal bodily and psychic modes. Her life-long, schizoid type pattern, "the pendulum of closeness and isolation', with its extreme of psycho-physical collapse and devitalization, was replayed in therapy. The analyst's symbolic attitude is emphasized, containing the patient's initial affective explosion and validating the physicality of her condition. Mirroring and steady rhythmic attunement became a new, pre-verbal, source of trust-vitalization; differentiation and separation replaced defensive splitting and dissociation. Then the overwhelmingly powerful bodily/maternal could be counterbalanced by the masculine, and a transitional space emerged for symbolic work. Both the regressive and the dynamic aspects of CFS are located in the earliest undifferentiated, archetypal, bodily/psychic modes, when the frustration of primary needs evokes the defences of the self. It is argued that our psychodynamic understanding can contribute to the stalemate in seeing chronic fatigue syndrome as either an organic illness or depression, and that a new linking of the somatic and psychic calls for a new professional collaboration.

Interpersonal Trust across Six Asia-Pacific Countries: Testing and Extending the ‘High Trust Society’ and ‘Low Trust Society’ Theory

PubMed Central

Ward, Paul R.; Mamerow, Loreen; Meyer, Samantha B.

2014-01-01

Background Trust is regarded as a necessary component for the smooth running of society, although societal and political modernising processes have been linked to an increase in mistrust, potentially signalling social and economic problems. Fukuyama developed the notion of ‘high trust’ and ‘low trust’ societies, as a way of understanding trust within different societies. The purpose of this paper is to empirically test and extend Fukuyama’s theory utilising data on interpersonal trust in Taiwan, Hong Kong, South Korea, Japan, Australia and Thailand. This paper focuses on trust in family, neighbours, strangers, foreigners and people with a different religion. Methods Cross-sectional surveys were undertaken in 2009–10, with an overall sample of 6331. Analyses of differences in overall levels of trust between countries were undertaken using Chi square analyses. Multivariate binomial logistic regression analysis was undertaken to identify socio-demographic predictors of trust in each country. Results Our data indicate a tripartite trust model: ‘high trust’ in Australia and Hong Kong; ‘medium trust’ in Japan and Taiwan; and ‘low trust’ in South Korea and Thailand. Trust in family and neighbours were very high across all countries, although trust in people with a different religion, trust in strangers and trust in foreigners varied considerably between countries. The regression models found a consistent group of subpopulations with low trust across the countries: people on low incomes, younger people and people with poor self-rated health. The results were conflicting for gender: females had lower trust in Thailand and Hong Kong, although in Australia, males had lower trust in strangers, whereas females had lower trust in foreigners. Conclusion This paper identifies high, medium and low trust societies, in addition to high and low trusting population subgroups. Our analyses extend the seminal work of Fukuyama, providing both corroboration and refutation for his theory. PMID:24760052

Does Trust Beget Trustworthiness? Trust and Trustworthiness in Two Games and Two Cultures: A Research Note

ERIC Educational Resources Information Center

Kiyonari, Toko; Yamagishi, Toshio; Cook, Karen S.; Cheshire, Coye

2006-01-01

An important unanswered question in the empirical literature on trust is whether trusting begets trustworthiness. In two experimental games, with Japanese and American participants, respectively, we compared trust and trustworthiness to provide an answer to this question. The trustee in the standard Trust Game knows that he or she is trusted,…

Drawing on a Knowledge-Based Trust Perspective to Examine and Conceptualize within-School Trust Development by Principals

ERIC Educational Resources Information Center

Cosner, Shelby

2010-01-01

Research has revealed the importance of trust to schools and pointed to the central role that principals play in cultivating within-school trust, yet less is known about the ways that principals cultivate such trust. Moreover, divergent perspectives and varied contexts for examining trust have limited the transfer of trust scholarship to practice…

Polymorphism of the Oxytocin Receptor Gene Modulates Behavioral and Attitudinal Trust among Men but Not Women.

PubMed

Nishina, Kuniyuki; Takagishi, Haruto; Inoue-Murayama, Miho; Takahashi, Hidehiko; Yamagishi, Toshio

2015-01-01

A relationship between the oxytocin receptor gene (OXTR) and behavioral and attitudinal trust has been suggested, but the nature of this relationship has not yet been established. We obtained behavioral trust data from 470 Japanese participants (242 women) aged 20-59 years, together with their levels of general trust and personality traits (NEO-FFI). Saliva buccal swabs were collected from 411 of these 470 participants and used for genotyping of OXTR rs53576. Our participants were found to have more AA alleles (40%) than GG alleles (12%). The GG men were more trusting and also rated higher on attitudinal trust than AA men, and this difference did not diminish when personality traits were controlled for. However, this pattern was not observed among women. In addition, controlling for attitudinal trust reduced the difference in behavioral trust among men to a non-significant level, but the difference in attitudinal trust remained significant when behavioral trust was controlled. These results indicate that the OXTR genotype affects attitudinal trust as part of an individual's relatively stable disposition, and further affects behavioral trust through changes in attitudinal trust.

I trust it, but I don't know why: effects of implicit attitudes toward automation on trust in an automated system.

PubMed

Merritt, Stephanie M; Heimbaugh, Heather; LaChapell, Jennifer; Lee, Deborah

2013-06-01

This study is the first to examine the influence of implicit attitudes toward automation on users' trust in automation. Past empirical work has examined explicit (conscious) influences on user level of trust in automation but has not yet measured implicit influences. We examine concurrent effects of explicit propensity to trust machines and implicit attitudes toward automation on trust in an automated system. We examine differential impacts of each under varying automation performance conditions (clearly good, ambiguous, clearly poor). Participants completed both a self-report measure of propensity to trust and an Implicit Association Test measuring implicit attitude toward automation, then performed an X-ray screening task. Automation performance was manipulated within-subjects by varying the number and obviousness of errors. Explicit propensity to trust and implicit attitude toward automation did not significantly correlate. When the automation's performance was ambiguous, implicit attitude significantly affected automation trust, and its relationship with propensity to trust was additive: Increments in either were related to increases in trust. When errors were obvious, a significant interaction between the implicit and explicit measures was found, with those high in both having higher trust. Implicit attitudes have important implications for automation trust. Users may not be able to accurately report why they experience a given level of trust. To understand why users trust or fail to trust automation, measurements of implicit and explicit predictors may be necessary. Furthermore, implicit attitude toward automation might be used as a lever to effectively calibrate trust.

26 CFR 301.7701-4 - Trusts.

Code of Federal Regulations, 2014 CFR

2014-04-01

...) Environmental remediation trusts. (1) An environmental remediation trust is considered a trust for purposes of... trust is collecting and disbursing amounts for environmental remediation of an existing waste site to... federal, state, or local environmental laws for environmental remediation of the waste site; and the trust...

26 CFR 301.7701-4 - Trusts.

Code of Federal Regulations, 2011 CFR

2011-04-01

...) Environmental remediation trusts. (1) An environmental remediation trust is considered a trust for purposes of... trust is collecting and disbursing amounts for environmental remediation of an existing waste site to... federal, state, or local environmental laws for environmental remediation of the waste site; and the trust...

26 CFR 301.7701-4 - Trusts.

Code of Federal Regulations, 2012 CFR

2012-04-01

...) Environmental remediation trusts. (1) An environmental remediation trust is considered a trust for purposes of... trust is collecting and disbursing amounts for environmental remediation of an existing waste site to... federal, state, or local environmental laws for environmental remediation of the waste site; and the trust...

26 CFR 301.7701-4 - Trusts.

Code of Federal Regulations, 2013 CFR

2013-04-01

...) Environmental remediation trusts. (1) An environmental remediation trust is considered a trust for purposes of... trust is collecting and disbursing amounts for environmental remediation of an existing waste site to... federal, state, or local environmental laws for environmental remediation of the waste site; and the trust...

A robust trust establishment scheme for wireless sensor networks.

PubMed

Ishmanov, Farruh; Kim, Sung Won; Nam, Seung Yeob

2015-03-23

Security techniques like cryptography and authentication can fail to protect a network once a node is compromised. Hence, trust establishment continuously monitors and evaluates node behavior to detect malicious and compromised nodes. However, just like other security schemes, trust establishment is also vulnerable to attack. Moreover, malicious nodes might misbehave intelligently to trick trust establishment schemes. Unfortunately, attack-resistance and robustness issues with trust establishment schemes have not received much attention from the research community. Considering the vulnerability of trust establishment to different attacks and the unique features of sensor nodes in wireless sensor networks, we propose a lightweight and robust trust establishment scheme. The proposed trust scheme is lightweight thanks to a simple trust estimation method. The comprehensiveness and flexibility of the proposed trust estimation scheme make it robust against different types of attack and misbehavior. Performance evaluation under different types of misbehavior and on-off attacks shows that the detection rate of the proposed trust mechanism is higher and more stable compared to other trust mechanisms.

The Role of Concurrent Chemical and Physical Processes in Determining the Maximum Use Temperature of Thermosetting Polymers for Aerospace Applications

DTIC Science & Technology

2011-04-04

ore purchased f rom Lonz a, AG and used a s-received. Copper(I I) acetoacetonate from R OC/RIC and nony lphenol (Technical Grade) fro m Aldrich...were combined to produce a liquid catalyst. Sample Preparation. Catalyst batc hes were prepared by blending 30 weight parts nony lphenol with

Physically (CO2) activated hydrochars from hickory and peanut hull: preparation, characterization, and sorption of methylene blue, lead, copper, and cadmium

USDA-ARS?s Scientific Manuscript database

The effects of carbon dioxide activation temperature (600-900 degree Celsius °C) and time (1 and 2 h) on the physicochemical and sorptive characteristics of hickory and peanut hull hydrochars were investigated. The extent of burn-off increased with increasing activation times and temperatures, and r...

High Pressure Particulate Physics Facility

DTIC Science & Technology

2011-03-26

controlled loading conditions, nanosecond time resolution diagnostics are required. Therefore, state of the art diagnostic tools such as Velocity...front end plate. The Data Acquisition System (DAS) is based on the state of the art National Instruments PXI system. The architecture provides...obtained by copper wire. In the future x-ray cinematography , line VISAR and time indexed spectroscopy are planned. SECTION III SUMMARY We are

Physical and mechanical properties of flakeboard produced from recycled CCA-treated wood

Treesearch

W. Li; T.F. Shupe; Chung-Yun Hse

2004-01-01

Chromated copper arsenate (CCA) treated wood has been most widely used in North America since the 1970s for many exterior applications such as decks, fences, playground equipment, utility poles, and others. A large volume of CCA-treated wood is currently coming out of service. Traditional disposal methods such as landfilling and incineration are not without adverse...

A longitudinal and experimental study of the impact of knowledge on the bases of institutional trust

PubMed Central

Kimbrough, Christopher D.; Shockley, Ellie; Neal, Tess M. S.; Herian, Mitchel N.; Hamm, Joseph A.; Bornstein, Brian H.; Tomkins, Alan J.

2017-01-01

This study examined a knowledge-centered theory of institutional trust development. In the context of trust in water regulatory institutions, the moderating impact of knowledge was tested to determine if there were longitudinal changes in the bases of institutional trust as a function of increases in knowledge about a target institution. We hypothesized that as people learn about an institution with which they were previously unfamiliar, they begin to form more nuanced perceptions, distinguishing the new institution from other institutions and relying less upon their generalized trust to estimate their trust in that institution. Prior to having specific, differential information about a new institution, we expected institutional trust to be a function of generalized trust variables such as dispositional trust and trust in government. The longitudinal experiment involved 185 college students randomly assigned to one of three information conditions. Every 3 months for 15 months, participants read information about water regulatory institutions or a control institution. At each time point, participants reported their trust in and perceptions of the trust- and distrust-worthiness of the water regulatory institutions. Participants also completed measures of knowledge of water regulatory institutions, dispositional trust, and governmental trust. Our manipulation check indicated that, as expected, those in the experimental group increased in subjective knowledge of water regulatory institutions to a greater extent than those in the control condition. Consistent with our hypotheses, there was some evidence that, compared to the control group, the experimental group relied less on their general trust in government as a basis for their trust in water regulatory institutions. However, contrary to our hypotheses, there was no evidence the experimental group relied less on dispositional trust as a basis for institutional trust. There also was some evidence the experimental group’s trust in water regulatory institutions was less affected by fluctuations of trustworthiness (but not distrustworthiness) perceptions over time. This suggests that knowledge results in the development of more stable institutional trust attitudes, but that trustworthiness and distrustworthiness perceptions may operate somewhat differently when impacting trust in specific institutions. PMID:28414808

A longitudinal and experimental study of the impact of knowledge on the bases of institutional trust.

PubMed

PytlikZillig, Lisa M; Kimbrough, Christopher D; Shockley, Ellie; Neal, Tess M S; Herian, Mitchel N; Hamm, Joseph A; Bornstein, Brian H; Tomkins, Alan J

2017-01-01

This study examined a knowledge-centered theory of institutional trust development. In the context of trust in water regulatory institutions, the moderating impact of knowledge was tested to determine if there were longitudinal changes in the bases of institutional trust as a function of increases in knowledge about a target institution. We hypothesized that as people learn about an institution with which they were previously unfamiliar, they begin to form more nuanced perceptions, distinguishing the new institution from other institutions and relying less upon their generalized trust to estimate their trust in that institution. Prior to having specific, differential information about a new institution, we expected institutional trust to be a function of generalized trust variables such as dispositional trust and trust in government. The longitudinal experiment involved 185 college students randomly assigned to one of three information conditions. Every 3 months for 15 months, participants read information about water regulatory institutions or a control institution. At each time point, participants reported their trust in and perceptions of the trust- and distrust-worthiness of the water regulatory institutions. Participants also completed measures of knowledge of water regulatory institutions, dispositional trust, and governmental trust. Our manipulation check indicated that, as expected, those in the experimental group increased in subjective knowledge of water regulatory institutions to a greater extent than those in the control condition. Consistent with our hypotheses, there was some evidence that, compared to the control group, the experimental group relied less on their general trust in government as a basis for their trust in water regulatory institutions. However, contrary to our hypotheses, there was no evidence the experimental group relied less on dispositional trust as a basis for institutional trust. There also was some evidence the experimental group's trust in water regulatory institutions was less affected by fluctuations of trustworthiness (but not distrustworthiness) perceptions over time. This suggests that knowledge results in the development of more stable institutional trust attitudes, but that trustworthiness and distrustworthiness perceptions may operate somewhat differently when impacting trust in specific institutions.

The arsenic removal from arsenopyrite in sulfide mineral by physicochemical extraction

NASA Astrophysics Data System (ADS)

Jo, Jiyu; Cho, Kanghee; Choi, Nagchoul; Park*, Cheonyoung

2015-04-01

The most abundant As ore mineral is arsenopyrite (FeAsS). Arsenopyrite is present in sulfide ores associated with sediment-hosted Au deposits, it tends to be the earliest-formed mineral, derived from hydrothermal solutions and formed at temperatures typically of 100(degree Celsius) or more. The aim of this study was to investigate the mineralogical phase change and arsenic removal from arsenopyrite as a penalty element in sulfide mineral contained Au by physical extraction (high frequency) and chemical leaching (thiocyanate). Arsenic removal experiments for were performed under various conditions of high frequency exposure(1~35 min), thiocyanate concentration (0.1~1.0M), HCl concentration (0.1~2.0M), copper(2) sulfate concentration (0.1~1.0M), temperature (30~60 degree Celsius). Increasing the high frequency exposure produced a positive effect on arsenic removal in arsenopyrite. The highest percentage arsenic removal of 96.67% was obtained under the following conditions by thiocyanate leaching: thiocyanate concentration = 1.0M ; HCl concentration = 2.0M ; copper(2) sulfate concentration = 1.0M ; temperature = 60(degree Celsius) This study demonstrates the adequate performance of physical extraction (high frequency) and chemical leaching (thiocyanate) for the arsenic removal from arsenopyrite as a penalty element.

Not all trust is created equal: dispositional and history-based trust in human-automation interactions.

PubMed

Merritt, Stephanie M; Ilgen, Daniel R

2008-04-01

We provide an empirical demonstration of the importance of attending to human user individual differences in examinations of trust and automation use. Past research has generally supported the notions that machine reliability predicts trust in automation, and trust in turn predicts automation use. However, links between user personality and perceptions of the machine with trust in automation have not been empirically established. On our X-ray screening task, 255 students rated trust and made automation use decisions while visually searching for weapons in X-ray images of luggage. We demonstrate that individual differences affect perceptions of machine characteristics when actual machine characteristics are constant, that perceptions account for 52% of trust variance above the effects of actual characteristics, and that perceptions mediate the effects of actual characteristics on trust. Importantly, we also demonstrate that when administered at different times, the same six trust items reflect two types of trust (dispositional trust and history-based trust) and that these two trust constructs are differentially related to other variables. Interactions were found among user characteristics, machine characteristics, and automation use. Our results suggest that increased specificity in the conceptualization and measurement of trust is required, future researchers should assess user perceptions of machine characteristics in addition to actual machine characteristics, and incorporation of user extraversion and propensity to trust machines can increase prediction of automation use decisions. Potential applications include the design of flexible automation training programs tailored to individuals who differ in systematic ways.

Understanding Teamwork in the Provision of Cancer Care: Highlighting the Role of Trust.

PubMed

Lazzara, Elizabeth H; Keebler, Joseph R; Day, Soosi; DiazGranados, Deborah; Pan, Minggui; King, Michael A; Tu, Shin-Ping

2016-11-01

Team science research has indicated that trust is a critical variable of teamwork, contributing greatly to a team's performance. Trust has long been examined in health care with research focusing on the development of trust by patients with their health care practitioners. Studies have indicated that trust is linked to patient satisfaction, adherence to treatment, continuity of care, and improved outcomes. We explore the construct of trust using a case example of a patient who received a surgical procedure for a precancerous polyp. We apply the principle of trust to the case as well as present the literature on trust and key definitions for understanding trust. Additionally, we apply the definitions presented to the specific case example by highlighting moments where trust is developed or violated. Lastly, we offer insights to health care practitioners on the development of trust in their own patient interactions to improve care.

Understanding Teamwork in the Provision of Cancer Care: Highlighting the Role of Trust

PubMed Central

Keebler, Joseph R.; Day, Soosi; DiazGranados, Deborah; Pan, Minggui; King, Michael A.; Tu, Shin-Ping

2016-01-01

Team science research has indicated that trust is a critical variable of teamwork, contributing greatly to a team’s performance. Trust has long been examined in health care with research focusing on the development of trust by patients with their health care practitioners. Studies have indicated that trust is linked to patient satisfaction, adherence to treatment, continuity of care, and improved outcomes. We explore the construct of trust using a case example of a patient who received a surgical procedure for a precancerous polyp. We apply the principle of trust to the case as well as present the literature on trust and key definitions for understanding trust. Additionally, we apply the definitions presented to the specific case example by highlighting moments where trust is developed or violated. Lastly, we offer insights to health care practitioners on the development of trust in their own patient interactions to improve care. PMID:27601505

Trust Discovery in Online Communities

ERIC Educational Resources Information Center

Piorkowski, John

2014-01-01

This research aims to discover interpersonal trust in online communities. Two novel trust models are built to explain interpersonal trust in online communities drawing theories and models from multiple relevant areas, including organizational trust models, trust in virtual settings, speech act theory, identity theory, and common bond theory. In…

Trust-Effectiveness Patterns in Schools

ERIC Educational Resources Information Center

Forsyth, Patrick B.; Barnes, Laura L. B.; Adams, Curt M.

2006-01-01

Purpose: To investigate the consequences of relational trust, especially parent measured trust, for desirable school outcomes. Design/methodology/approach: Using a US Midwestern state sample of 79 schools, parent and teacher trust data are used to derive a trust-effectiveness typology. Trust was conceptualized as one party's willingness to be…

5 CFR 2634.405 - Certification of trusts.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 5 Administrative Personnel 3 2010-01-01 2010-01-01 false Certification of trusts. 2634.405 Section... FINANCIAL DISCLOSURE, QUALIFIED TRUSTS, AND CERTIFICATES OF DIVESTITURE Qualified Trusts § 2634.405 Certification of trusts. (a) Standards. Before a trust may be classified as a qualified blind or a qualified...

Building trust and diversity in patient-centered oncology clinical trials: An integrated model.

PubMed

Hurd, Thelma C; Kaplan, Charles D; Cook, Elise D; Chilton, Janice A; Lytton, Jay S; Hawk, Ernest T; Jones, Lovell A

2017-04-01

Trust is the cornerstone of clinical trial recruitment and retention. Efforts to decrease barriers and increase clinical trial participation among diverse populations have yielded modest results. There is an urgent need to better understand the complex interactions between trust and clinical trial participation. The process of trust-building has been a focus of intense research in the business community. Yet, little has been published about trust in oncology clinical trials or the process of building trust in clinical trials. Both clinical trials and business share common dimensions. Business strategies for building trust may be transferable to the clinical trial setting. This study was conducted to understand and utilize contemporary thinking about building trust to develop an Integrated Model of Trust that incorporates both clinical and business perspectives. A key word-directed literature search of the PubMed, Medline, Cochrane, and Google Search databases for entries dated between 1 January 1985 and 1 September 2015 was conducted to obtain information from which to develop an Integrated Model of Trust. Successful trial participation requires both participants and clinical trial team members to build distinctly different types of interpersonal trust to effect recruitment and retention. They are built under conditions of significant emotional stress and time constraints among people who do not know each other and have never worked together before. Swift Trust and Traditional Trust are sequentially built during the clinical trial process. Swift trust operates during the recruitment and very early active treatment phases of the clinical trial process. Traditional trust is built over time and operates during the active treatment and surveillance stages of clinical trials. The Psychological Contract frames the participants' and clinical trial team members' interpersonal trust relationship. The "terms" of interpersonal trust are negotiated through the psychological contract. Contract renegotiation occurs in response to cyclical changes within the trust relationship throughout trial participation. The Integrated Model of Trust offers a novel framework to interrogate the process by which diverse populations and clinical trial teams build trust. To our knowledge, this is the first model of trust-building in clinical trials that frames trust development through integrated clinical and business perspectives. By focusing on the process, rather than outcomes of trust-building diverse trial participants, clinical trials teams, participants, and cancer centers may be able to better understand, measure, and manage their trust relationships in real time. Ultimately, this may foster increased recruitment and retention of diverse populations to clinical trials.

Trust transitivity in social networks.

PubMed

Richters, Oliver; Peixoto, Tiago P

2011-04-05

Non-centralized recommendation-based decision making is a central feature of several social and technological processes, such as market dynamics, peer-to-peer file-sharing and the web of trust of digital certification. We investigate the properties of trust propagation on networks, based on a simple metric of trust transitivity. We investigate analytically the percolation properties of trust transitivity in random networks with arbitrary in/out-degree distributions, and compare with numerical realizations. We find that the existence of a non-zero fraction of absolute trust (i.e. entirely confident trust) is a requirement for the viability of global trust propagation in large systems: The average pair-wise trust is marked by a discontinuous transition at a specific fraction of absolute trust, below which it vanishes. Furthermore, we perform an extensive analysis of the Pretty Good Privacy (PGP) web of trust, in view of the concepts introduced. We compare different scenarios of trust distribution: community- and authority-centered. We find that these scenarios lead to sharply different patterns of trust propagation, due to the segregation of authority hubs and densely-connected communities. While the authority-centered scenario is more efficient, and leads to higher average trust values, it favours weakly-connected "fringe" nodes, which are directly trusted by authorities. The community-centered scheme, on the other hand, favours nodes with intermediate in/out-degrees, in detriment of the authorities and its "fringe" peers.

Trust Transitivity in Social Networks

PubMed Central

Richters, Oliver; Peixoto, Tiago P.

2011-01-01

Non-centralized recommendation-based decision making is a central feature of several social and technological processes, such as market dynamics, peer-to-peer file-sharing and the web of trust of digital certification. We investigate the properties of trust propagation on networks, based on a simple metric of trust transitivity. We investigate analytically the percolation properties of trust transitivity in random networks with arbitrary in/out-degree distributions, and compare with numerical realizations. We find that the existence of a non-zero fraction of absolute trust (i.e. entirely confident trust) is a requirement for the viability of global trust propagation in large systems: The average pair-wise trust is marked by a discontinuous transition at a specific fraction of absolute trust, below which it vanishes. Furthermore, we perform an extensive analysis of the Pretty Good Privacy (PGP) web of trust, in view of the concepts introduced. We compare different scenarios of trust distribution: community- and authority-centered. We find that these scenarios lead to sharply different patterns of trust propagation, due to the segregation of authority hubs and densely-connected communities. While the authority-centered scenario is more efficient, and leads to higher average trust values, it favours weakly-connected “fringe” nodes, which are directly trusted by authorities. The community-centered scheme, on the other hand, favours nodes with intermediate in/out-degrees, in detriment of the authorities and its “fringe” peers. PMID:21483683

Ecotoxicological assessment of solar cell leachates: Copper indium gallium selenide (CIGS) cells show higher activity than organic photovoltaic (OPV) cells.

PubMed

Brun, Nadja Rebecca; Wehrli, Bernhard; Fent, Karl

2016-02-01

Despite the increasing use of photovoltaics their potential environmental risks are poorly understood. Here, we compared ecotoxicological effects of two thin-film photovoltaics: established copper indium gallium selenide (CIGS) and organic photovoltaic (OPV) cells. Leachates were produced by exposing photovoltaics to UV light, physical damage, and exposure to environmentally relevant model waters, representing mesotrophic lake water, acidic rain, and seawater. CIGS cell leachates contained 583 μg L(-1) molybdenum at lake water, whereas at acidic rain and seawater conditions, iron, copper, zinc, molybdenum, cadmium, silver, and tin were present up to 7219 μg L(-1). From OPV, copper (14 μg L(-1)), zinc (87 μg L(-1)) and silver (78 μg L(-1)) leached. Zebrafish embryos were exposed until 120 h post-fertilization to these extracts. CIGS leachates produced under acidic rain, as well as CIGS and OPV leachates produced under seawater conditions resulted in a marked hatching delay and increase in heart edema. Depending on model water and solar cell, transcriptional alterations occurred in genes involved in oxidative stress (cat), hormonal activity (vtg1, ar), metallothionein (mt2), ER stress (bip, chop), and apoptosis (casp9). The effects were dependent on the concentrations of cationic metals in leachates. Addition of ethylenediaminetetraacetic acid protected zebrafish embryos from morphological and molecular effects. Our study suggests that metals leaching from damaged CIGS cells, may pose a potential environmental risk. Copyright © 2015 Elsevier B.V. All rights reserved.

The transparency paradox. Building trust, resolving disputes and optimising logistics on conventional and online drugs markets.

PubMed

Tzanetakis, Meropi; Kamphausen, Gerrit; Werse, Bernd; von Laufenberg, Roger

2016-09-01

In recent years, marketplaces in the darknet emerged where vendors and customers can exchange illicit drugs and other goods on digital platforms by using hidden internet services. The main thesis of this paper is that in an online environment, different practices for building trust and reputation emerge that stabilise market processes. Qualitative and quantitative data from a recent German project on conventional (offline) small-scale drug dealing as well as qualitative case studies on four online vendors operating on Agora market are used to explore alternative practices for building trust and reputation. They also explore the use of violence and logistics established on cryptomarkets in comparison to traditional dealing. To analyse the data we applied qualitative content analyses. For conventional commercial illicit drug dealing on various kinds of markets, trust between buyer and seller is a crucial issue, often emphasized by restricting deals to well-known persons. While this typically includes face-to-face contact, the opposite is true with online drug trading. It is characteristic of cryptomarkets that the parties involved in a transaction know neither the personal identity nor the physical location of one another. This is realised by using aliases, anonymising software, and cryptocurrencies for payments. Violence typically only plays a role in traditional drug dealing, but mostly, if at all, just as a latent threat for potential rule-breakers. Processing a transaction anonymously includes escrow services for the buyers, which makes trading more reliable, although they cannot completely prevent scamming. Furthermore, online drug marketplaces usually offer a customer feedback system that allows customers to rate vendors and review products. A positive vendor feedback helps building reputation and trust in such an online environment. With regard to logistics, most conventional small-scale dealers restrict their acts of selling to private surroundings to avoid encounters with law enforcement. In cryptomarkets, the purchased drugs are delivered by traditional postal services, sometimes to false addresses or to someone else's name to conceal the identity and address of the buyer. On virtual drug markets practices of building trust, conflict resolution and logistics is constantly evolving. They offer improved security solutions on the one hand while on the other hand scamming and fraud seem to be widely used on both online and conventional drug markets. Copyright © 2015 Elsevier B.V. All rights reserved.

25 CFR 1000.355 - How are trust evaluations conducted?

Code of Federal Regulations, 2010 CFR

2010-04-01

... 25 Indians 2 2010-04-01 2010-04-01 false How are trust evaluations conducted? 1000.355 Section... EDUCATION ACT Trust Evaluation Review Annual Trust Evaluations § 1000.355 How are trust evaluations conducted? (a) Each year the Secretary's designated representative(s) will conduct trust evaluations for...

78 FR 21428 - Royce Focus Trust, Inc., et al.;

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-10

...] Royce Focus Trust, Inc., et al.; Notice of Application April 4, 2013. AGENCY: Securities and Exchange.... Applicants: Royce Focus Trust, Inc. (``RFT''), Royce Value Trust, Inc. (``RVT''), Royce Micro-Cap Trust, Inc... prior order (``Prior Order'').\\1\\ \\1\\ Royce Global Trust, Inc., et al., Investment Company Act Release...

77 FR 25514 - Northern Trust Investments, Inc., et al.; Notice of Application

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-30

... Trust Investments, Inc., et al.; Notice of Application April 24, 2012. AGENCY: Securities and Exchange... sections 12(d)(1)(A) and (B) of the Act. Applicants: Northern Trust Investments, Inc. (``Northern Trust''), FlexShares Trust (``Trust''), and Foreside Fund Services, LLC (``Foreside''). Summary of Application...

78 FR 5846 - Securian Funds Trust, et al.; Notice of Application

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-28

...] Securian Funds Trust, et al.; Notice of Application January 22, 2013. AGENCY: Securities and Exchange... the Act to invest in certain financial instruments. Applicants: Securian Funds Trust (the ``Trust... Trust is organized as a Delaware statutory trust and is registered under the Act as an open-end...

5 CFR 2634.403 - Qualified blind trusts.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 5 Administrative Personnel 3 2012-01-01 2012-01-01 false Qualified blind trusts. 2634.403 Section... Qualified blind trusts. (a) Definition. A qualified blind trust is a trust in which the filer, his spouse... instrument which establishes a blind trust must adhere substantively to model drafts circulated by the Office...

25 CFR 115.815 - How does a tribe request trust funds from a tribal trust account?

Code of Federal Regulations, 2010 CFR

2010-04-01

... 25 Indians 1 2010-04-01 2010-04-01 false How does a tribe request trust funds from a tribal trust account? 115.815 Section 115.815 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR FINANCIAL ACTIVITIES TRUST FUNDS FOR TRIBES AND INDIVIDUAL INDIANS Tribal Accounts Withdrawing Tribal Trust Funds § 115.815 How does a tribe request trust...

Trust is a must: What is involved in trusting those who manage forest fires?

Treesearch

Adam Liljeblad; Bill Borrie; Alan Watson

2010-01-01

Trust is a complicated emotion. In the past, many social scientists have studied trust. They discovered that trust involves a number of beliefs and emotions. The scientists in this study were interested in learning more about trust. They believed that forest managers can do a better job if people trust them to do what is best for citizens and the environment (figure 1...

Impact of malicious servers over trust and reputation models in wireless sensor networks

NASA Astrophysics Data System (ADS)

Verma, Vinod Kumar; Singh, Surinder; Pathak, N. P.

2016-03-01

This article deals with the impact of malicious servers over different trust and reputation models in wireless sensor networks. First, we analysed the five trust and reputation models, namely BTRM-WSN, Eigen trust, peer trust, power trust, linguistic fuzzy trust model. Further, we proposed wireless sensor network design for optimisation of these models. Finally, influence of malicious servers on the behaviour of above mentioned trust and reputation models is discussed. Statistical analysis has been carried out to prove the validity of our proposal.

[Trust and power--three interrelationships].

PubMed

Grimen, H

2001-12-10

Trust is not always an idyllic phenomenon; it may also serve as a context in which power is exercised. Reflecting on power in relation to trust gives us a richer theoretical framework for analysing the social conditions for establishing, maintaining and eroding relations of trust. This article proposes three interrelationships between trust and power: power may create trust; unequal distribution of power may affect the conditions for establishing and maintaining relations of trust; the internal structure of interest and control is identical in some types of trust relations and some types of power relations.

BIOS Security Analysis and a Kind of Trusted BIOS

NASA Astrophysics Data System (ADS)

Zhou, Zhenliu; Xu, Rongsheng

The BIOS's security threats to computer system are analyzed and security requirements for firmware BIOS are summarized in this paper. Through discussion about TCG's trust transitivity, a new approach about CRTM implementation based on BIOS is developed. In this paper, we also put forward a new trusted BIOS architecture-UTBIOS which is built on Intel Framework for EFI/UEFI. The trustworthiness of UTBIOS is based on trusted hardware TPM. In UTBIOS, trust encapsulation and trust measurement are used to construct pre-OS trust chain. Performance of trust measurement is also analyzed in the end.

Trust-Building in Electronic Markets: Relative Importance and Interaction Effects of Trust-Building Mechanisms

NASA Astrophysics Data System (ADS)

Tams, Stefan

We examine the relative and complementary effectiveness of trust-building strategies in online environments. While prior research has examined various antecedents to trust, we investigated two trust-building mechanisms more in depth: Web site trust and vendor reputation. We tried to understand the relative effectiveness of these two important mechanisms to provide online businesses with a clear recommendation of how to establish trust in an effective and efficient manner. Drawing from the literature on trust, we proposed vendor reputation to be more effective than Web site trust. Moreover, we examined a potential complementary effect of these mechanisms so as to provide online businesses with a deeper understanding of how to derive superior trust. We hypothesize a small such effect. The study proposes a laboratory experiment to test the model.

Introducing ab initio based neural networks for transition-rate prediction in kinetic Monte Carlo simulations

NASA Astrophysics Data System (ADS)

Messina, Luca; Castin, Nicolas; Domain, Christophe; Olsson, Pär

2017-02-01

The quality of kinetic Monte Carlo (KMC) simulations of microstructure evolution in alloys relies on the parametrization of point-defect migration rates, which are complex functions of the local chemical composition and can be calculated accurately with ab initio methods. However, constructing reliable models that ensure the best possible transfer of physical information from ab initio to KMC is a challenging task. This work presents an innovative approach, where the transition rates are predicted by artificial neural networks trained on a database of 2000 migration barriers, obtained with density functional theory (DFT) in place of interatomic potentials. The method is tested on copper precipitation in thermally aged iron alloys, by means of a hybrid atomistic-object KMC model. For the object part of the model, the stability and mobility properties of copper-vacancy clusters are analyzed by means of independent atomistic KMC simulations, driven by the same neural networks. The cluster diffusion coefficients and mean free paths are found to increase with size, confirming the dominant role of coarsening of medium- and large-sized clusters in the precipitation kinetics. The evolution under thermal aging is in better agreement with experiments with respect to a previous interatomic-potential model, especially concerning the experiment time scales. However, the model underestimates the solubility of copper in iron due to the excessively high solution energy predicted by the chosen DFT method. Nevertheless, this work proves the capability of neural networks to transfer complex ab initio physical properties to higher-scale models, and facilitates the extension to systems with increasing chemical complexity, setting the ground for reliable microstructure evolution simulations in a wide range of alloys and applications.

A new approach for crystallization of copper(ii) oxide hollow nanostructures with superior catalytic and magnetic response

NASA Astrophysics Data System (ADS)

Singh, Inderjeet; Landfester, Katharina; Chandra, Amreesh; Muñoz-Espí, Rafael

2015-11-01

We report the synthesis of copper(ii) oxide hollow nanostructures at ambient pressure and close to room temperature by applying the soft templating effect provided by the confinement of droplets in miniemulsion systems. Particle growth can be explained by considering a mechanism that involves both diffusion and reaction control. The catalytic reduction of p-nitrophenol in aqueous media is used as a model reaction to prove the catalytic activity of the materials: the synthesized hollow structures show nearly 100 times higher rate constants than solid CuO microspheres. The kinetic behavior and the order of the reduction reaction change due to the increase of the surface area of the hollow structures. The synthesis also leads to modification of physical properties such as magnetism.We report the synthesis of copper(ii) oxide hollow nanostructures at ambient pressure and close to room temperature by applying the soft templating effect provided by the confinement of droplets in miniemulsion systems. Particle growth can be explained by considering a mechanism that involves both diffusion and reaction control. The catalytic reduction of p-nitrophenol in aqueous media is used as a model reaction to prove the catalytic activity of the materials: the synthesized hollow structures show nearly 100 times higher rate constants than solid CuO microspheres. The kinetic behavior and the order of the reduction reaction change due to the increase of the surface area of the hollow structures. The synthesis also leads to modification of physical properties such as magnetism. Electronic supplementary information (ESI) available: Associated structural and morphological analysis, XPS characterization, BET surface area, catalytic measurements, recycle tests of the catalyst, and magnetic characterizations. See DOI: 10.1039/c5nr05579b

Food and trust in Australia: building a picture.

PubMed

Coveney, John

2008-03-01

To explore consumer trust in food, especially people's experiences that support or diminish trust in the food supply; consumer practices to strengthen trust in food; and views on how trust in the food supply could be increased. Adelaide, South Australia. In-depth qualitative research interviews and focus groups. Women and men who are primary food providers in families (n = 24). Media coverage of food scares and scandals and personal experience of food-borne illness challenged respondents' trust in the food system. Poor retail food handling practices and questionable marketing ploys by food manufacturers also decreased trust. Buying 'Made-in-Australia' produce and following food safety procedures at home were important practices to strengthen food trust. Knowledge of procedures for local food inspection and for national food regulation to keep food safe was scanty. Having a strong regulatory environment governing food safety and quality was considered by respondents to be of prime importance for trust building. The dimensions of trust found in this study are consistent with key theoretical aspects of trust. The need for trust in highly complex environments, in this case the food supply, was evident. Trust was found to be integral to food choice, and negative media reports, the sources of which themselves enjoy various levels of dependability, were found to easily damage trust relationships. The lack of visibility of authoritative monitoring and surveillance, misleading food advertising, and poor retail food handling practices were identified as areas that decreased consumer trust. Respondents also questioned the probity of food labelling, especially health claims and other mechanisms designed to guide food choice. The research highlights the role trust plays in food choice. It also emphasises the importance of a visible authoritative presence in the food system to strengthen trust and provide reassurance to consumers.

Social capital, political trust and self-reported psychological health: a population-based study.

PubMed

Lindstrom, Martin; Mohseni, Mohabbat

2009-02-01

This study investigates the association between political trust (an aspect of institutional trust) in the Riksdag (the national parliament in Sweden) and self-reported psychological health, taking generalized (horizontal) trust in other people into account. The 2004 public health survey in Skåne in Southern Sweden is a cross-sectional postal questionnaire study that was answered by 27,757 respondents aged 18-80 yielding a 59% response rate. A logistic regression model was used to investigate the associations between political trust and self-reported psychological health adjusting for possible confounders (age, country of origin, education, economic stress and generalized trust in other people i.e. horizontal trust). We found that 13.0% of the men and 18.9% of the women reported poor psychological health. A total of 17.3% and 11.6% of the male and female respondents, respectively, reported that they had no trust at all in the national parliament, and another 38.2% and 36.2%, respectively, reported that their political trust was not particularly high. Respondents in younger age groups, born abroad, with high education, high levels of economic stress, low horizontal trust and low political trust had significantly higher levels of self-reported poor psychological health. There was a significant association between low political trust and low horizontal trust. After adjustments for age, country of origin, education and economic stress, the inclusion of horizontal trust reduced the odds ratios of self-reported poor psychological health in the "no political trust at all" category compared to the "very high political trust" category from 1.6 to 1.4 among men and from 1.7 to 1.4 among women. It is concluded that low political trust in the Riksdag seems to be significantly and positively associated with poor mental health.

Measuring physicians' trust: A scoping review with implications for public policy.

PubMed

Wilk, Adam S; Platt, Jodyn E

2016-09-01

Increasingly, physicians are expected to work in productive, trusting relationships with other health system stakeholders to improve patient and system outcomes. A better understanding of physicians' trust is greatly needed. This study assesses the state of the literature on physicians' trust in patients, other health care providers, institutions, and data systems or technology, and identifies key themes, dimensions of trust considered, quantitative measures used, and opportunities for further development via a scoping review. Peer-reviewed, English-language research articles were identified for inclusion in this study based on systematic searches of the Ovid/Medline, Pubmed, Proquest, Scopus, Elsevier, and Web of Science databases. Search terms included "trust" along with "physician," "doctor," "primary care provider," "family practitioner," "family practice," "generalist," "general practitioner," "general practice," "internist," "internal medicine," or "health professional," and plausible variants. Among the relevant articles identified (n = 446), the vast majority focused on patient trust in physicians (81.2%). Among articles examining physicians' trust, rigorous investigations of trust are rare, narrowly focused, and imprecise in their discussion of trust. Robust investigations of the effects of trust or distrust-as opposed to trust's determinants-and studies using validated quantitative trust measures are particularly rare. Studies typically measured trust using the language of confidence, effective communication, or cooperation, rarely or never capturing other important dimensions of trust, such as fidelity, the trustee's reputation, social capital, vulnerability, and acceptance. Research employing new, validated measures of physicians' trust, especially trust in institutions, may be highly informative to health system leaders and policymakers seeking to hone and enhance tools for improving the effectiveness and efficiency of the health care system. Copyright © 2016 Elsevier Ltd. All rights reserved.

Technology advancement: a factor in increasing resource use

USGS Publications Warehouse

Wilburn, David R.; Goonan, Thomas G.; Bleiwas, Donald I.

2001-01-01

The specter of mineral resource scarcity has been repeatedly raised as a concern because ever-growing populations with seemingly insatiable appetites for minerals place claims against a finite resource endowment. This report analyzes how technology has helped to ease resource constraints, and uses case studies of aluminum, copper, potash, and sulfur minerals to identify the effects of technology on resource supply. In spite of heightened demand for and increased loss of resources to environmental policy and urbanization, mineral producers historically have been able to continually expand production and lower costs. Specific production increases for the years 1900-98 were: aluminum (3,250 percent), copper (2,465 percent), potash (3,770 percent), and sulfur (6,000 percent). For the same period, constant-dollar (1998) prices decreased: aluminum (90 percent), copper (75 percent), potash (94 percent), and sulfur (89 percent). The application of technology has made available mineral deposits that were previously overlooked or considered non-viable. Using technology, producers can meet the demand for stronger, energy-efficient, more environmentally safe products with less physical material. Technologies have been developed to increase the amount of materials recycled and remanufactured. Technology development can occur in breakthroughs, but most often advances incrementally. Technological development is driven by the profit motive.

Phytoremediation of heavy metal copper (Cu2+) by sunflower (Helianthus annuus l.)

NASA Astrophysics Data System (ADS)

Mahardika, G.; Rinanti, A.; Fachrul, M. F.

2018-01-01

A study in microcosmic condition has been carried out to determine the effectiveness of Helianthus annuus as a hyperaccumulator plant for heavy metal, Copper (Cu2+), that exposed in the soil. Artificial pollutants containing Copper (Cu2+) 0, 60, 120, 180 ppm are exposed to uncontaminated soil. The 12-weeks old H. annuus seedling were grown in Cu2+ contaminated soil, with variations of absorption time 3, 6, and 9 weeks. Analysis of Cu2+ concentration on soil and H. annuus (root, stem, leaf) was analised by Atomic Absorbtion Spectrometry (AAS). H. annuus are capable for Cu2+ removal, and the highest removal of Cu2+ is 85.56%, the highest metal accumulation/bioconcentration factor (BCF) is 0.99 occurred at roots with 9 weeks of exposure time and the highest translocation factor (TF) is 0.71. This highest removal is five times better than absorption by stems and leaves. The results concluded, the use of H. annuus for phytoextraction of heavy metals Cu2+ in contaminated soil can be an alternative to the absorption of heavy metal Cu2+ with low concentration metals which is generally very difficult to do in physical-chemical removal.

Time Dependent Dielectric Breakdown in Copper Low-k Interconnects: Mechanisms and Reliability Models

PubMed Central

Wong, Terence K.S.

2012-01-01

The time dependent dielectric breakdown phenomenon in copper low-k damascene interconnects for ultra large-scale integration is reviewed. The loss of insulation between neighboring interconnects represents an emerging back end-of-the-line reliability issue that is not fully understood. After describing the main dielectric leakage mechanisms in low-k materials (Poole-Frenkel and Schottky emission), the major dielectric reliability models that had appeared in the literature are discussed, namely: the Lloyd model, 1/E model, thermochemical E model, E1/2 models, E2 model and the Haase model. These models can be broadly categorized into those that consider only intrinsic breakdown (Lloyd, 1/E, E and Haase) and those that take into account copper migration in low-k materials (E1/2, E2). For each model, the physical assumptions and the proposed breakdown mechanism will be discussed, together with the quantitative relationship predicting the time to breakdown and supporting experimental data. Experimental attempts on validation of dielectric reliability models using data obtained from low field stressing are briefly discussed. The phenomenon of soft breakdown, which often precedes hard breakdown in porous ultra low-k materials, is highlighted for future research.

Modification of graphene electronic properties via controllable gas-phase doping with copper chloride

NASA Astrophysics Data System (ADS)

Rybin, Maxim G.; Islamova, Vera R.; Obraztsova, Ekaterina A.; Obraztsova, Elena D.

2018-01-01

Molecular doping is an efficient, non-destructive, and simple method for changing the electronic structure of materials. Here, we present a simple air ambient vapor deposition method for functionalization of pristine graphene with a strong electron acceptor: copper chloride. The doped graphene was characterized by Raman spectroscopy, UV-vis-NIR optical absorption spectroscopy, scanning electron microscopy, and electro-physical measurements performed using the 4-probe method. The effect of charge transfer from graphene to a dopant results in shifting the Fermi level in doped graphene. The change of the electronic structure of doped graphene was confirmed by the tangential Raman peak (G-peak) shift and by the appearance of the gap in the UV-vis-NIR spectrum after doping. Moreover, the charge transfer resulted in a substantial decrease in electrical sheet resistance depending on the doping level. At the highest concentration of copper chloride, a Fermi level shift into the valence band up to 0.64 eV and a decrease in the sheet resistance value by 2.36 times were observed (from 888 Ω/sq to 376 Ω/sq for a single graphene layer with 97% of transparency).

Adaptation of Selenastrum capricornutum (Chlorophyceae) to copper

USGS Publications Warehouse

Kuwabara, J.S.; Leland, H.V.

1986-01-01

Selenastrum capricornutum Printz, growing in a chemically defined medium, was used as a model for studying adaptation of algae to a toxic metal (copper) ion. Cells exhibited lag-phase adaptation to 0.8 ??M total Cu (10-12 M free ion concentration) after 20 generations of Cu exposure. Selenastrum adapted to the same concentration when Cu was gradually introduced over an 8-h period using a specially designed apparatus that provided a transient increase in exposure concentration. Cu adaptation was not attributable to media conditioning by algal exudates. Duration of lag phase was a more sensitive index of copper toxicity to Selenastrum that was growth rate or stationary-phase cell density under the experimental conditions used. Chemical speciation of the Cu dosing solution influenced the duration of lag phase even when media formulations were identical after dosing. Selenastrum initially exposed to Cu in a CuCl2 injection solution exhibited a lag phase of 3.9 d, but this was reduced to 1.5 d when a CuEDTA solution was used to achieve the same total Cu and EDTA concentrations. Physical and chemical processes that accelerated the rate of increase in cupric ion concentration generally increased the duration of lag phase. ?? 1986.

Toward a Trust Evaluation Mechanism in the Social Internet of Things.

PubMed

Truong, Nguyen Binh; Lee, Hyunwoo; Askwith, Bob; Lee, Gyu Myoung

2017-06-09

In the blooming era of the Internet of Things (IoT), trust has been accepted as a vital factor for provisioning secure, reliable, seamless communications and services. However, a large number of challenges still remain unsolved due to the ambiguity of the concept of trust as well as the variety of divergent trust models in different contexts. In this research, we augment the trust concept, the trust definition and provide a general conceptual model in the context of the Social IoT (SIoT) environment by breaking down all attributes influencing trust. Then, we propose a trust evaluation model called REK, comprised of the triad of trust indicators (TIs) Reputation, Experience and Knowledge. The REK model covers multi-dimensional aspects of trust by incorporating heterogeneous information from direct observation (as Knowledge TI), personal experiences (as Experience TI) to global opinions (as Reputation TI). The associated evaluation models for the three TIs are also proposed and provisioned. We then come up with an aggregation mechanism for deriving trust values as the final outcome of the REK evaluation model. We believe this article offers better understandings on trust as well as provides several prospective approaches for the trust evaluation in the SIoT environment.

Toward a Trust Evaluation Mechanism in the Social Internet of Things

PubMed Central

Truong, Nguyen Binh; Lee, Hyunwoo; Askwith, Bob; Lee, Gyu Myoung

2017-01-01

In the blooming era of the Internet of Things (IoT), trust has been accepted as a vital factor for provisioning secure, reliable, seamless communications and services. However, a large number of challenges still remain unsolved due to the ambiguity of the concept of trust as well as the variety of divergent trust models in different contexts. In this research, we augment the trust concept, the trust definition and provide a general conceptual model in the context of the Social IoT (SIoT) environment by breaking down all attributes influencing trust. Then, we propose a trust evaluation model called REK, comprised of the triad of trust indicators (TIs) Reputation, Experience and Knowledge. The REK model covers multi-dimensional aspects of trust by incorporating heterogeneous information from direct observation (as Knowledge TI), personal experiences (as Experience TI) to global opinions (as Reputation TI). The associated evaluation models for the three TIs are also proposed and provisioned. We then come up with an aggregation mechanism for deriving trust values as the final outcome of the REK evaluation model. We believe this article offers better understandings on trust as well as provides several prospective approaches for the trust evaluation in the SIoT environment. PMID:28598401

A Unified Theory of Trust and Collaboration

NASA Astrophysics Data System (ADS)

Cai, Guoray; Squicciarini, Anna

We consider a type of applications where collaboration and trust are tightly coupled with the need to protect sensitive information. Existing trust management technologies have been limited to offering generic mechanisms for enforcing access control policies based on exchanged credentials, and rarely deal with the situated meaning of trust in a specific collaborative context. Towards trust management for highly dynamic and collaborative activities, this paper describes a theory of trust intention and semantics that makes explicit connections between collaborative activities and trust. The model supports inferring trust state based on knowledge about state of collaborative activity. It is the first step towards a unified approach for computer-mediated trust communication in the context of collaborative work.

Building trusting relationships in online health communities.

PubMed

Zhao, Jing; Ha, Sejin; Widdows, Richard

2013-09-01

This study investigates consumers' use of online health communities (OHCs) for healthcare from a relationship building perspective based on the commitment-trust theory of relationships. The study proposes that perspective taking, empathic concern, self-efficacy, and network density affect the development of both cognitive and affective trust, which together determine OHC members' membership continuance intention (MCI) and knowledge contribution. Data collected from eight existing OHCs (N=255) were utilized to test the hypothesized model. Results show that perspective taking and self-efficacy can increase cognitive trust and affective trust, respectively. Network density contributes to cognitive and affective trust. Both cognitive trust and affective trust influence MCI, while only affective trust impacts members' knowledge contribution behaviors.

Copper transport and trafficking at the host-bacterial pathogen interface.

PubMed

Fu, Yue; Chang, Feng-Ming James; Giedroc, David P

2014-12-16

CONSPECTUS: The human innate immune system has evolved the means to reduce the bioavailability of first-row late d-block transition metal ions to invading microbial pathogens in a process termed "nutritional immunity". Transition metals from Mn(II) to Zn(II) function as metalloenzyme cofactors in all living cells, and the successful pathogen is capable of mounting an adaptive response to mitigate the effects of host control of transition metal bioavailability. Emerging evidence suggests that Mn, Fe, and Zn are withheld from the pathogen in classically defined nutritional immunity, while Cu is used to kill invading microorganisms. This Account summarizes new molecular-level insights into copper trafficking across cell membranes from studies of a number of important bacterial pathogens and model organisms, including Escherichia coli, Salmonella species, Mycobacterium tuberculosis, and Streptococcus pneumoniae, to illustrate general principles of cellular copper resistance. Recent highlights of copper chemistry at the host-microbial pathogen interface include the first high resolution structures and functional characterization of a Cu(I)-effluxing P1B-ATPase, a new class of bacterial copper chaperone, a fungal Cu-only superoxide dismutase SOD5, and the discovery of a small molecule Cu-bound SOD mimetic. Successful harnessing by the pathogen of host-derived bactericidal Cu to reduce the bacterial load of reactive oxygen species (ROS) is an emerging theme; in addition, recent studies continue to emphasize the importance of short lifetime protein-protein interactions that orchestrate the channeling of Cu(I) from donor to target without dissociation into bulk solution; this, in turn, mitigates the off-pathway effects of Cu(I) toxicity in both the periplasm in Gram negative organisms and in the bacterial cytoplasm. It is unclear as yet, outside of the photosynthetic bacteria, whether Cu(I) is trafficked to other cellular destinations, for example, to cuproenzymes or other intracellular storage sites, or the general degree to which copper chaperones vs copper efflux transporters are essential for bacterial pathogenesis in the vertebrate host. Future studies will be directed toward the identification and structural characterization of other cellular targets of Cu(I) trafficking and resistance, the physical and mechanistic characterization of Cu(I)-transfer intermediates, and elucidation of the mutual dependence of Cu(I) trafficking and cellular redox status on thiol chemistry in the cytoplasm. Crippling bacterial control of Cu(I) sensing, trafficking, and efflux may represent a viable strategy for the development of new antibiotics.

78 FR 41462 - Self-Regulatory Organizations; BATS Exchange, Inc.; Notice of Filing of a Proposed Rule Change...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-10

... Asset. The term ``Currency,'' as used in the proposed rule, means one or more currencies, or currency...; Commodity-Based Trust Shares; Currency Trust Shares; Commodity Index Trust Shares; Commodity Futures Trust Shares; Partnership Units; Trust Units; Managed Trust Securities; and Currency Warrants. Specifically...

The Trust Project - Symbiotic Human Machine Teams: Social Cueing for Trust and Reliance

DTIC Science & Technology

2016-06-30

AFRL-RH-WP-TR-2016-0096 THE TRUST PROJECT - SYMBIOTIC HUMAN-MACHINE TEAMS: SOCIAL CUEING FOR TRUST & RELIANCE Susan Rivers, Monika Lohani, Marissa...30 JUN 2012 – 30 JUN 2016 4. TITLE AND SUBTITLE THE TRUST PROJECT - SYMBIOTIC HUMAN-MACHINE TEAMS: SOCIAL CUEING FOR TRUST & RELIANCE 5a. CONTRACT

Trust and School Life: The Role of Trust for Learning, Teaching, Leading, and Bridging

ERIC Educational Resources Information Center

Van Maele, Dimitri, Ed.; Forsyth, Patrick B., Ed.; Van Houtte, Miek, Ed.

2014-01-01

This book samples recent and emerging trust research in education including an array of conceptual approaches, measurement innovations, and explored determinants and outcomes of trust. The collection of pathways explores the phenomenon of trust and establishes the significance of trust relationships in school life. It emboldens the claim that…

[Trust-promoting variables in child-adult interaction].

PubMed

Esser, M; Petermann, F

1985-01-01

As interpersonal trust is recognized as a central variable in child-psychotherapy, and as psychological research has not yet developed strategies to advance interpersonal trust, the question arose by which social behavior variables children's trust is determined in the interaction process between adults and children. After having developed a most concrete definition of trust in terms of social interaction behavior, everyday pedagogical interaction sequences involving adults and children were analyzed in order to identify behavioral elements or patterns of interaction conducive to trust. According to the hypotheses, the behavior classes "positive adult reaction", "adult trusting behavior" and the interaction pattern "positive adult response to child trusting behavior" were found as conducive to interpersonal trust in children. Furthermore the realisation of the pattern "alternation of trusting child behavior and positive adult behavior" for a longer period of interaction was identified as material to the foundation of interpersonal trust. The realisation of that pattern is encouraged by positive and permanent reinforcement of different child reactions by the adult and by the child's readiness to react trustfully to positive adult behavior.

Scheduling multimedia services in cloud computing environment

NASA Astrophysics Data System (ADS)

Liu, Yunchang; Li, Chunlin; Luo, Youlong; Shao, Yanling; Zhang, Jing

2018-02-01

Currently, security is a critical factor for multimedia services running in the cloud computing environment. As an effective mechanism, trust can improve security level and mitigate attacks within cloud computing environments. Unfortunately, existing scheduling strategy for multimedia service in the cloud computing environment do not integrate trust mechanism when making scheduling decisions. In this paper, we propose a scheduling scheme for multimedia services in multi clouds. At first, a novel scheduling architecture is presented. Then, We build a trust model including both subjective trust and objective trust to evaluate the trust degree of multimedia service providers. By employing Bayesian theory, the subjective trust degree between multimedia service providers and users is obtained. According to the attributes of QoS, the objective trust degree of multimedia service providers is calculated. Finally, a scheduling algorithm integrating trust of entities is proposed by considering the deadline, cost and trust requirements of multimedia services. The scheduling algorithm heuristically hunts for reasonable resource allocations and satisfies the requirement of trust and meets deadlines for the multimedia services. Detailed simulated experiments demonstrate the effectiveness and feasibility of the proposed trust scheduling scheme.

Damage to the insula is associated with abnormal interpersonal trust

PubMed Central

Belfi, Amy M.; Koscik, Timothy R.; Tranel, Daniel

2015-01-01

Reciprocal trust is a crucial component of cooperative, mutually beneficial social relationships. Previous research using tasks that require judging and developing interpersonal trust has suggested that the insula may be an important brain region underlying these processes (King-Casas et al., 2008). Here, using a neuropsychological approach, we investigated the role of the insula in reciprocal trust during the Trust Game (TG), an interpersonal economic exchange. Consistent with previous research, we found that neurologically normal adults reciprocate trust in kind, i.e., they increase trust in response to increases from their partners, and decrease trust in response to decreases. In contrast, individuals with damage to the insula displayed abnormal expressions of trust. Specifically, these individuals behaved benevolently (expressing misplaced trust) when playing the role of investor, and malevolently (violating their partner’s trust) when playing the role of the trustee. Our findings lend further support to the idea that the insula is important for expressing normal interpersonal trust, perhaps because the insula helps to recognize risk during decision-making and to identify social norm violations. PMID:25846668

A game theory-based trust measurement model for social networks.

PubMed

Wang, Yingjie; Cai, Zhipeng; Yin, Guisheng; Gao, Yang; Tong, Xiangrong; Han, Qilong

2016-01-01

In social networks, trust is a complex social network. Participants in online social networks want to share information and experiences with as many reliable users as possible. However, the modeling of trust is complicated and application dependent. Modeling trust needs to consider interaction history, recommendation, user behaviors and so on. Therefore, modeling trust is an important focus for online social networks. We propose a game theory-based trust measurement model for social networks. The trust degree is calculated from three aspects, service reliability, feedback effectiveness, recommendation credibility, to get more accurate result. In addition, to alleviate the free-riding problem, we propose a game theory-based punishment mechanism for specific trust and global trust, respectively. We prove that the proposed trust measurement model is effective. The free-riding problem can be resolved effectively through adding the proposed punishment mechanism.

The Reputational Consequences of Generalized Trust

PubMed Central

Evans, Anthony M.; van de Calseyde, Philippe P. F. M.

2017-01-01

The present research examines the reputational consequences of generalized trust. High-trust individuals are seen as moral and sociable, but not necessarily competent. When controlling for other traits, there is a negative relationship between trust and perceived competence (Studies 1 and 2). Compared with optimism, generalized trust has stronger effects on morality and sociability (Study 2). Furthermore, people judge those who do not discriminate between trustworthy and untrustworthy groups (unconditional trustors) more negatively than those who only trust groups that are, in fact, trustworthy (conditional trustors). Unconditional trust and unconditional distrust are both viewed negatively (Study 3), even after controlling for attitudinal similarity (Study 4). Critically, both generalized trust and discriminant ability (i.e., conditional trust) have independent reputational benefits (Study 5). These studies suggest that generalized trust plays an important role in how we perceive and judge others. PMID:29251247

Two dimensions of trust in physicians in OECD-countries.

PubMed

Saarinen, Arttu Olavi; Räsänen, Pekka; Kouvo, Antti

2016-01-01

The purpose of this paper is to analyse citizens' trust in physicians in 22 OECD countries. The authors measure trust in physicians using items on generalised and particularised trust. Individual-level data are received from the ISSP Research Group (2011). The authors also utilise macro variables drawn from different data banks. Data were analysed using descriptive statistics and xtlogit regression models. The main micro-level hypothesis is that low self-reported health is strongly associated with lower trust in physicians. The second micro-level hypothesis is that frequent meetings with physicians result in higher trust. The third micro-level hypothesis assumes that males, and older and better educated respondents, express higher trust compared to others. The first macro-level hypothesis is that lower income inequality leads to higher trust in physicians. The second macro-level hypothesis is that greater physician density leads to higher trust in physicians. The authors found that the influence of individual and macro-level characteristics varies between trust types. Results indicate that both trust types are clearly associated with individual-level determinants. However, only general trust in physicians has weak associations with macro-level indicators (mainly physician density) and therefore on institutional cross-country differences. It seems that particularised trust in a physician's skills is more restricted to the individuals' health and their own experiences meeting doctors, whereas general trust likely reflects attitudes towards the prevalent profession in the country. The findings hold significance for healthcare systems research and for research concerning social trust generally.

Application of the Reina Trust and Betrayal Model to the experience of pediatric critical care clinicians.

PubMed

Rushton, Cynda Hylton; Reina, Michelle L; Francovich, Christopher; Naumann, Phyllis; Reina, Dennis S

2010-07-01

Trust is essential in the workplace, yet no systematic studies of trust among pediatric critical care professionals have been done. To determine the feasibility of measuring trust in a pediatric intensive care unit by using established scales from the corporate world and to determine what behaviors build, break, and rebuild trust. The Reina Trust and Betrayal Model was used to explore contractual, competence, and communication trust. Nurses and physicians in a pediatric intensive care unit completed online surveys to measure organizational, team, and patient trust. Quantitative data from 3 standard survey instruments and qualitative responses to 3 open-ended questions were analyzed and compared. Quantitative data from all 3 instruments indicated moderate to high levels of trust; scores for competence and contractual trust were higher than scores for communication trust. Scores indicated agreement on behaviors that build trust, such as pointing out risky situations to each other, actively striving to build supportive and productive relationships, and giving and receiving constructive feedback. Foremost among trust-breaking behaviors was gossip, which was more troublesome to respondents with longer experience in critical care. Responses to the open-ended questions underscored these themes. The most frequently cited items included encouraging mutually serving intentions, sharing information, and involving and seeking the input of others. The Reina trust scales and open-ended questions are feasible and applicable to pediatric critical care units, and data collected with these instruments are useful in determining what behaviors build, break, and rebuild trust among staff.

Trust me, I'm a researcher!: The role of trust in biomedical research.

PubMed

Kerasidou, Angeliki

2017-03-01

In biomedical research lack of trust is seen as a great threat that can severely jeopardise the whole biomedical research enterprise. Practices, such as informed consent, and also the administrative and regulatory oversight of research in the form of research ethics committees and Institutional Review Boards, are established to ensure the protection of future research subjects and, at the same time, restore public trust in biomedical research. Empirical research also testifies to the role of trust as one of the decisive factors in research participation and lack of trust as a barrier for consenting to research. However, what is often missing is a clear definition of trust. This paper seeks to address this gap. It starts with a conceptual analysis of the term trust. It compares trust with two other related terms, those of reliance and trustworthiness, and offers a defence of Baier's attribute of 'good will' a basic characteristic of trust. It, then, proceeds to consider trust in the context of biomedical research by examining two questions: First, is trust necessary in biomedical research?; and second, do increases in regulatory oversight of biomedical research also increase trust in the field? This paper argues that regulatory oversight is important for increasing reliance in biomedical research, but it does not improve trust, which remains important for biomedical research. It finishes by pointing at professional integrity as a way of promoting trust and trustworthiness in this field.

Who Adolescents Trust May Impact Their Health: Findings from Baltimore.

PubMed

Mmari, Kristin; Marshall, Beth; Lantos, Hannah; Blum, Robert Wm

2016-06-01

This study is one of the first to explore the relevance of trust to the health of adolescents living in a disadvantaged urban setting. The primary objectives were to determine the differences in the sociodemographic characteristics between adolescents who do and do not trust and to examine the associations between trust and health. Data were drawn from the Well-Being of Adolescents in Vulnerable Environments (WAVE) study, which is a cross-sectional global study of adolescents in very low-income urban settings conducted in 2011-2013. This paper focused on 446 adolescents in Baltimore as it was the primary site where trust was explicitly measured. For the main analyses, six health outcomes were examined: (1) self-rated health; (2) violence victimization; (3) binge drinking; (4) marijuana use; (5) post-traumatic stress disorder (PTSD); and (6) condom use at last sex. Independent variables included sociodemographic variables (age, gender, current school enrolment, perceived relative wealth, and family structure) and two dimensions of trust: community trust (trust in individuals/groups within neighborhood) and institutional trust (trust in authorities). The results show that more than half the sample had no trust in police, and a high proportion had no trust in other types of authority. Among girls, those with higher levels of community trust were less likely to be victimized and involved in binge drinking. Meanwhile, girls with higher levels of institutional trust were more likely to use a condom and less likely to have used marijuana. Among boys, those with higher levels of community trust were more likely to use a condom, while those with higher levels of institutional trust were less likely to use marijuana, but more likely binge drink. Overall, this study highlights the importance of trust for adolescent health. Most surprising were the differences in the associations between boys and girls with regard to the type of trust and specific health outcome that was significant.

Lowest energy Frenkel and charge transfer exciton intermixing in one-dimensional copper phthalocyanine molecular lattice

NASA Astrophysics Data System (ADS)

Bondarev, I. V.; Popescu, A.; Younts, R. A.; Hoffman, B.; McAfee, T.; Dougherty, D. B.; Gundogdu, K.; Ade, H. W.

2016-11-01

We report the results of the combined experimental and theoretical studies of the low-lying exciton states in crystalline copper phthalocyanine. We derive the eigen energy spectrum for the two lowest intramolecular Frenkel excitons coupled to the intermolecular charge transfer exciton state and compare it with temperature dependent optical absorption spectra measured experimentally, to obtain the parameters of the Frenkel-charge-transfer exciton intermixing. The two Frenkel exciton states are spaced apart by 0.26 eV, and the charge transfer exciton state is 50 meV above the lowest Frenkel exciton. Both Frenkel excitons are strongly mixed with the charge transfer exciton, showing the coupling constant 0.17 eV which agrees with earlier experimental measurements. These results can be used for the proper interpretation of the physical properties of crystalline phthalocyanines.

Preparation of cuxinygazsen (X=0-2, Y=0-2, Z=0-2, N=0-3) precursor films by electrodeposition for fabricating high efficiency solar cells

DOEpatents

Bhattacharya, Raghu N.; Contreras, Miguel A.; Keane, James; Tennant, Andrew L.; Tuttle, John R.; Ramanathan, Kannan; Noufi, Rommel

1998-03-24

High quality thin films of copper-indium-gallium-diselenide useful in the production of solar cells are prepared by electrodepositing at least one of the constituent metals onto a glass/Mo substrate, followed by physical vapor deposition of copper and selenium or indium and selenium to adjust the final stoichiometry of the thin film to approximately Cu(In,Ga)Se.sub.2. Using an AC voltage of 1-100 KHz in combination with a DC voltage for electrodeposition improves the morphology and growth rate of the deposited thin film. An electrodeposition solution comprising at least in part an organic solvent may be used in conjunction with an increased cathodic potential to increase the gallium content of the electrodeposited thin film.

In situ conductance measurements of copper phthalocyanine thin film growth on sapphire [0001].

PubMed

Murdey, Richard; Sato, Naoki

2011-06-21

The current flowing through a thin film of copper phthalocyanine vacuum deposited on a single crystal sapphire [0001] surface was measured during film growth from 0 to 93 nm. The results, expressed as conductance vs. nominal film thickness, indicate three distinct film growth regions. Conductive material forms below about 5 nm and again above 35 nm, but in the intermediate thicknesses the film conductance was observed to decrease with increasing film thickness. With the aid of ac-AFM topology images taken ex situ, the conductance results are explained based on the Stranski-Krastanov (2D + 3D) film growth mechanism, in which the formation of a thin wetting layer is followed by the growth of discrete islands that eventually coalesce into an interpenetrating, conductive network. © 2011 American Institute of Physics

New hermetic sealing material for vacuum brazing of stainless steels

NASA Astrophysics Data System (ADS)

Hildebrandt, S.; Wiehl, G.; Silze, F.

2016-03-01

For vacuum brazing applications such as in vacuum interrupter industry Hermetic Sealing Materials (HSM) with low partial pressure are widely used. AgCu28 dominates the hermetic sealing market, as it has a very good wetting behavior on copper and metallized ceramics. Within recent decades wetting on stainless steel has become more and more important. However, today the silver content of HSMs is more in focus than in the past decades, because it has the biggest impact on the material prices. Umicore Technical Materials has developed a new copper based HSM, CuAg40Ga10. The wettability on stainless steel is significantly improved compared to AgCu28 and the total silver content is reduced by almost 44%. In this article the physical properties of the alloy and its brazed joints will be presented compared to AgCu28.

What predicts the trust of online health information?

PubMed Central

Kwon, Jeong Hyun; Kye, Su-Yeon; Park, Eun Young; Oh, Kyung Hee; Park, Keeho

2015-01-01

OBJECTIVES: Little attention has been paid to levels of trust in online sources of health information. The objective of this study was to investigate levels of trust in various sources of health information (interpersonal channels, traditional media, and Internet media), and to examine the predictors of trust in health information available on the Internet. METHODS: A questionnaire was administered to 1,300 people (20 years of age or older), evaluating levels of trust in various sources of health information. RESULTS: The highest level of trust was expressed regarding interpersonal channels, with hospital physicians regarded as the most trusted source of information age and income showed an association with trust in online information sources. Elderly people were not likely to trust Internet news sources, and high incomes were found to be strongly associated with trust in online sources of information overall. CONCLUSIONS: Public health organizations must consider the predictors for trust in various sources of information in order to employ appropriate media when targeting vulnerable individuals or developing messaging strategies for health professionals. PMID:26212505

Online trust building through third party trust transfer and third party protection

NASA Astrophysics Data System (ADS)

Wandoko, Wanda; Saleh Abbas, Bahtiar; Budiastuti, Dyah; Kosala, Raymond

2017-03-01

The primary objective of this research is to develop an online trust building mechanism for SME (Small Medium Enterprise). Trust is very important in e-commerce. The nature of online shopping has a greater uncertainty than offline shopping. Seeing as there is an uncertainty that can produce risks, a prospective buyer’s trust is needed. A lot of people’s unwillingness to shop online is caused by their lack of trust toward e-commerce. E-commerce is said to be one of the ways for SME to compete with bigger companies. However, building trust requires immense time and cost. SME with limited resources may experience difficulties in building trust just with their own resources. Base on literature research that needs to be validated in next research, we found that trust can be built through trust transfer from the reputable and well-known trust-mark issuer, and third party protection such as escrow account service and credit card issuer.

Report 11HL: Technologies for Trusted Maritime Situational Awareness

DTIC Science & Technology

2011-10-01

Olympics. The AIS antenna can be seen on the wooden pole to the right. The ASIA camera is contained within the Pelco enclosure (i.e., white case) on...tracks based on GPS and radar. The physical deployment of ASIA, radar and the acoustic array are also shown...the 2010 Vancouver Olympics. The AIS antenna can be seen on the wooden pole to the right. The ASIA camera is contained within the Pelco enclosure

Modelling Public Security Operations: Evaluation of the Holistic Security Ecosystem (HSE) Proof-of-Concept

DTIC Science & Technology

2012-12-01

base pour construire de telles simulations et pourrait être adaptée à d’autres expériences à un coût relativement bas. Perspectives : Les leçons...systems (such as culture , [ Culture ]). This seven-dimensional framework advocates that systems be viewed from the physical, individual, functional...structural, normative, social, and informational dimensions. The human factors include modelling stress, trust, risk factors, and cultural factors

Is It a Trust Issue? Factors That Influence Trust for Persons Living With HIV/AIDS.

PubMed

Krause, Denise D; May, Warren L

2016-09-01

Trust in one's health care provider, trust in the health care system in general, and even trust in one's community affects engagement in HIV-related health care. This article examines the issue of trust among a random sample of HIV-infected individuals residing in Mississippi, an area hard-hit by the HIV/AIDS epidemic. Five constructs based on survey responses from these individuals were developed: (1) trust in one's provider to offer the best possible medical care, (2) trust in one's provider to protect patient privacy, (3) willingness to disclose HIV status to one's provider, (4) trust in the health care system, and (5) trust in one's community. Findings suggest that interventions to improve trust in providers to deliver the highest quality of care should be targeted to young people, African Americans, and the more highly educated. Interventions to increase trust in providers to protect privacy should focus on creating and strengthening social support groups or networks that build relationships and foster trust. Interventions aimed to increase community trust also should be targeted to young people. This information is useful to researchers, policy makers, health care providers, and organizations interested in prioritizing interventions and strategies that have the greatest potential to reduce health disparities in HIV diagnosis and treatment in the Deep South. © 2016 Society for Public Health Education.

Keep Your Scanners Peeled: Gaze Behavior as a Measure of Automation Trust During Highly Automated Driving.

PubMed

Hergeth, Sebastian; Lorenz, Lutz; Vilimek, Roman; Krems, Josef F

2016-05-01

The feasibility of measuring drivers' automation trust via gaze behavior during highly automated driving was assessed with eye tracking and validated with self-reported automation trust in a driving simulator study. Earlier research from other domains indicates that drivers' automation trust might be inferred from gaze behavior, such as monitoring frequency. The gaze behavior and self-reported automation trust of 35 participants attending to a visually demanding non-driving-related task (NDRT) during highly automated driving was evaluated. The relationship between dispositional, situational, and learned automation trust with gaze behavior was compared. Overall, there was a consistent relationship between drivers' automation trust and gaze behavior. Participants reporting higher automation trust tended to monitor the automation less frequently. Further analyses revealed that higher automation trust was associated with lower monitoring frequency of the automation during NDRTs, and an increase in trust over the experimental session was connected with a decrease in monitoring frequency. We suggest that (a) the current results indicate a negative relationship between drivers' self-reported automation trust and monitoring frequency, (b) gaze behavior provides a more direct measure of automation trust than other behavioral measures, and (c) with further refinement, drivers' automation trust during highly automated driving might be inferred from gaze behavior. Potential applications of this research include the estimation of drivers' automation trust and reliance during highly automated driving. © 2016, Human Factors and Ergonomics Society.

Capturing Young American Trust in National Databases

ERIC Educational Resources Information Center

Menard, Lauren A.

2011-01-01

A pattern of decreasing trusting proportions in each consecutive decade and increasing trusting proportions with age was revealed in data. Although trust levels were lower in younger adults and the 2000s, findings did not support hypotheses of more rapidly falling trust levels or a college degree procuring less trust in the 2000s. A hypothesis of…

Trust or Consequences: The Relationship between Faculty Trust and Faculty Learning Communities in Higher Education

ERIC Educational Resources Information Center

Wilson, Gaye R.

2011-01-01

The purpose of this study was to investigate relationships between FLC membership and faculty trust in higher education colleagues and faculty trust in higher education administration in public and private universities in the United States. This quantitative study examines trust in colleagues and trust in administration in higher education, two…

25 CFR 115.808 - Could trust fund investments made by OTFM lose money?

Code of Federal Regulations, 2011 CFR

2011-04-01

... 25 Indians 1 2011-04-01 2011-04-01 false Could trust fund investments made by OTFM lose money? 115... TRUST FUNDS FOR TRIBES AND INDIVIDUAL INDIANS Tribal Accounts Investing and Managing Tribal Trust Funds § 115.808 Could trust fund investments made by OTFM lose money? The value of trust fund investments made...

17 CFR 240.16a-8 - Trusts.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 17 Commodity and Securities Exchanges 3 2010-04-01 2010-04-01 false Trusts. 240.16a-8 Section 240...-8 Trusts. (a) Persons subject to section 16—(1) Trusts. A trust shall be subject to section 16 of the Act with respect to securities of the issuer if the trust is a beneficial owner, pursuant to § 240...

26 CFR 1.684-4 - Outbound migrations of domestic trusts.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 26 Internal Revenue 8 2010-04-01 2010-04-01 false Outbound migrations of domestic trusts. 1.684-4... TAX (CONTINUED) INCOME TAXES Miscellaneous § 1.684-4 Outbound migrations of domestic trusts. (a) In general. If a U.S. person transfers property to a domestic trust, and such trust becomes a foreign trust...

26 CFR 25.2702-5 - Personal residence trusts.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 26 Internal Revenue 14 2010-04-01 2010-04-01 false Personal residence trusts. 25.2702-5 Section 25... residence trusts. (a)(1) In general. Section 2702 does not apply to a transfer in trust meeting the requirements of this section. A transfer in trust meets the requirements of this section only if the trust is a...

17 CFR 300.104 - Trust accounts.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 17 Commodity and Securities Exchanges 3 2010-04-01 2010-04-01 false Trust accounts. 300.104... Customers of Sipc Members § 300.104 Trust accounts. (a) A trust account held with a member shall be deemed a “qualifying trust account” if it is held on behalf of a valid and subsisting express trust created by a...

36 CFR 1011.14 - How will the Presidio Trust report debts to credit bureaus?

Code of Federal Regulations, 2010 CFR

2010-07-01

... 36 Parks, Forests, and Public Property 3 2010-07-01 2010-07-01 false How will the Presidio Trust... TRUST DEBT COLLECTION Procedures To Collect Presidio Trust Debts § 1011.14 How will the Presidio Trust report debts to credit bureaus? The Presidio Trust will report delinquent debts to credit bureaus in...

36 CFR 1011.15 - How will the Presidio Trust refer debts to private collection contractors?

Code of Federal Regulations, 2010 CFR

2010-07-01

... 36 Parks, Forests, and Public Property 3 2010-07-01 2010-07-01 false How will the Presidio Trust... Property PRESIDIO TRUST DEBT COLLECTION Procedures To Collect Presidio Trust Debts § 1011.15 How will the Presidio Trust refer debts to private collection contractors? The Presidio Trust will transfer delinquent...

75 FR 48337 - Change in Bank Control Notices; Acquisition of Shares of Bank or Bank Holding Companies

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-10

... of Helena, Montana; and David L. Anderson, Los Altos Hills, California; to acquire and retain control... Peeples, Amy L. Peeples, G. Thomas Peeples, Garrett T. Peeples Trust, with G. Thomas Peeples as trustee... Trust, Gage W. Peeples Trust, Garrett T. Peeples Trust, Lily L. Peeples Trust, Syndi M. Peeples Trust...

Trust in the workplace: factors affecting trust formation between team members.

PubMed

Spector, Michele D; Jones, Gwen E

2004-06-01

The authors used survey data from 127 professional-level employees working in 8 industries to assess the effects of respondent's trusting stance and (a) the trustee's organization membership (internal or external), (b) the hierarchical relationship (supervisor or peer), and (c) the gender of the trustee, on initial trust level for a new project team member. The authors found that trusting stance was positively related to initial trust level. The authors also found an interaction effect between respondent gender and trustee gender on initial trust. Specifically, male initial trust level was higher for a new male team member and lower for a new female team member. The present study provided additional understanding of the formation of initial trust levels and its importance for team functioning.

High school students' science academic achievement: The effect of the Lemov positive framing trust-building technique

NASA Astrophysics Data System (ADS)

Gigliette, Linda Marie

The purpose of this research was to investigate the effect of a trust-building technique called "positive-framing" (Lemov, 2010, p. 204) on the level of student-teacher trust and students' science academic achievement. The existing literature was reviewed under the constructs of trust, types of trust, trust-building strategies, and student academic achievement. The identified problem is a lack of research into the effect of trust from the high school student perspective and the effect of trust on student academic achievement in science. In addition, there is no empirical evidence to support the effectiveness of the "positive-framing" (Lemov, 2010, p. 204) trust-building intervention. The study involved a volunteer, convenience sample of 9th-grade science students at one high school in Northern California (N=240). The study employed a quasi-experimental, pretest, posttest non-equivalent control group design to examine the level of student trust in the teacher, using the "Student trust in faculty scale" (Forsyth, Adams, & Hoy, 2011, p. 180), and the students' academic achievement, according to the Integrated Process Skills Test II (Okey, Wise, & Burns, 1982). The independent variable was the "positive-framing" (Lemov, 2010, p. 204) trust-building intervention; the two dependent variables were the level of student-teacher trust and student academic achievement. The composite data from the "Student trust in faculty scale" and the academic achievement test were evaluated by a multivariate analysis of covariance (MANCOVA). Results of this study indicated that the null hypothesis was accepted. The "positive-framing" (Lemov, 2010, p. 204) trust-building intervention did not have a significant effect on either the student-teacher trust level or academic achievement in science.

The Condition for Generous Trust.

PubMed

Shinya, Obayashi; Yusuke, Inagaki; Hiroki, Takikawa

2016-01-01

Trust has been considered the "cement" of a society and is much studied in sociology and other social sciences. Most studies, however, have neglected one important aspect of trust: it involves an act of forgiving and showing tolerance toward another's failure. In this study, we refer to this concept as "generous trust" and examine the conditions under which generous trust becomes a more viable option when compared to other types of trust. We investigate two settings. First, we introduce two types of uncertainties: uncertainty as to whether trustees have the intention to cooperate, and uncertainty as to whether trustees have enough competence to accomplish the entrusted tasks. Second, we examine the manner in which trust functions in a broader social context, one that involves matching and commitment processes. Since we expect generosity or forgiveness to work differently in the matching and commitment processes, we must differentiate trust strategies into generous trust in the matching process and that in the commitment process. Our analytical strategy is two-fold. First, we analyze the "modified" trust game that incorporates the two types of uncertainties without the matching process. This simplified setting enables us to derive mathematical results using game theory, thereby giving basic insight into the trust mechanism. Second, we investigate socially embedded trust relationships in contexts involving the matching and commitment processes, using agent-based simulation. Results show that uncertainty about partner's intention and competence makes generous trust a viable option. In contrast, too much uncertainty undermines the possibility of generous trust. Furthermore, a strategy that is too generous cannot stand alone. Generosity should be accompanied with moderate punishment. As for socially embedded trust relationships, generosity functions differently in the matching process versus the commitment process. Indeed, these two types of generous trust coexist, and their coexistence enables a society to function well.

Intimate partner violence and poor mental health among Thai women residing in Sweden.

PubMed

Fernbrant, Cecilia; Emmelin, Maria; Essén, Birgitta; Östergren, Per-Olof; Cantor-Graae, Elizabeth

2014-01-01

The current aim is to examine the prevalence of intimate partner violence (IPV) among Thai women residing in Sweden and its association with mental health. We also investigate the potential influence of social isolation and social capital regarding the association between IPV and mental health outcome. A public health questionnaire in Thai was distributed by post to the entire population of Thai women, aged 18-64, residing in two regions in Sweden since 2006. Items included aspects related to IPV (physical/sexual/emotional), sociodemographic background, physical health, mental health (GHQ-12), social isolation, and social capital (i.e. social trust/participation). The response rate was 62.3% (n=804). Prevalence of lifetime reported IPV was 22.1%, with 20.5% by a previous partner and 6.7% by a current partner. Previous IPV exposure was significantly related to current IPV exposure, and all IPV exposure measures were significantly related to poor mental health. However, Thai women experiencing IPV by a current partner were more at risk for poor mental health than Thai women with previous or without any experience of IPV. Also, among all women exposed to IPV, those with trust in others and without exposure to social isolation seemed to have partial protection against the adverse mental health consequences associated with IPV. Most Thai women had never been exposed to IPV, and after migrating to Sweden, women had lower IPV exposure than in Thailand. However, the increased risk for poor mental health among those Thai women exposed to IPV suggests the need for supportive measures and targeted interventions to prevent further injuries and adverse health consequences. Although poor mental health in Thai women represents an obstacle for integration, the potential resilience indicated in the group with high social trust and without exposure to social isolation suggests that such aspects be included in the program designed to facilitate integration.

Intimate partner violence and poor mental health among Thai women residing in Sweden

PubMed Central

Fernbrant, Cecilia; Emmelin, Maria; Essén, Birgitta; Östergren, Per-Olof; Cantor-Graae, Elizabeth

2014-01-01

Objectives The current aim is to examine the prevalence of intimate partner violence (IPV) among Thai women residing in Sweden and its association with mental health. We also investigate the potential influence of social isolation and social capital regarding the association between IPV and mental health outcome. Design A public health questionnaire in Thai was distributed by post to the entire population of Thai women, aged 18–64, residing in two regions in Sweden since 2006. Items included aspects related to IPV (physical/sexual/emotional), sociodemographic background, physical health, mental health (GHQ-12), social isolation, and social capital (i.e. social trust/participation). Results The response rate was 62.3% (n=804). Prevalence of lifetime reported IPV was 22.1%, with 20.5% by a previous partner and 6.7% by a current partner. Previous IPV exposure was significantly related to current IPV exposure, and all IPV exposure measures were significantly related to poor mental health. However, Thai women experiencing IPV by a current partner were more at risk for poor mental health than Thai women with previous or without any experience of IPV. Also, among all women exposed to IPV, those with trust in others and without exposure to social isolation seemed to have partial protection against the adverse mental health consequences associated with IPV. Conclusions Most Thai women had never been exposed to IPV, and after migrating to Sweden, women had lower IPV exposure than in Thailand. However, the increased risk for poor mental health among those Thai women exposed to IPV suggests the need for supportive measures and targeted interventions to prevent further injuries and adverse health consequences. Although poor mental health in Thai women represents an obstacle for integration, the potential resilience indicated in the group with high social trust and without exposure to social isolation suggests that such aspects be included in the program designed to facilitate integration. PMID:25231099

What helps or hinders midwives to implement physical activity guidelines for obese pregnant women? A questionnaire survey using the Theoretical Domains Framework.

PubMed

McParlin, Catherine; Bell, Ruth; Robson, Stephen C; Muirhead, Colin R; Araújo-Soares, Vera

2017-06-01

to investigate barriers and facilitators to physical activity (PA) guideline implementation for midwives when advising obese pregnant women. a cross-sectional, self-completion, anonymous questionnaire was designed using the Theoretical Domains Framework. this framework was developed to evaluate the implementation of guidelines by health care professionals. A total of 40 questions were included. These were informed by previous research on pregnant women's and midwives views, knowledge and attitudes to PA, and supported by national evidence based guidelines. Demographic information and free text comments were also collected. three diverse NHS Trusts in the North East of England. all midwives employed by two hospital Trusts and the community midwives from the third Trust (n=375) were invited to participate. mean domain scores were calculated. Factor and regression analysis were performed to describe which theoretical domains may be influencing practice. Free text comments were analysed thematically. 192 (53%) questionnaires were returned. Mean domain scores were highest for social professional role and knowledge, and lowest for skills, beliefs about capabilities and behaviour regulation. Regression analysis indicated that skills and memory/attention/decision domains had a statistically significant influence on midwives discussing PA with obese pregnant women and advising them accordingly. Midwives comments indicated that they felt it was part of their role to discuss PA with all pregnant women but felt they lacked the skills and resources to do so effectively. midwives seem to have the necessary knowledge about the need/importance of PA advice for obese women and believe it is part of their role, but perceive they lack necessary skills and resources, and do not plan or prioritise the discussion regarding PA with obese pregnant woman. designing interventions that improve skills, promote routine enquiry regarding PA and provide resources (eg. information, referral pathways) may help improve midwives' PA advice. Copyright © 2016 Elsevier Ltd. All rights reserved.

Social capital, political trust and experience of cannabis smoking: a population-based study in southern Sweden.

PubMed

Lindström, Martin

2008-06-01

To investigate whether political mistrust in the Riksdag (the national parliament in Sweden) is an independent characteristic of cannabis smokers, or whether it reflects low confidence in people in general, and therefore low social capital. The 2004 public health survey in Skåne is a cross-sectional postal questionnaire study answered by 27,757 respondents aged 18-80 with a 59% response rate providing data on political trust, cannabis smoking, and potential confounders. 13.9% of the men and 8.3% of the women had smoked cannabis; 17.3% of the male and 11.6% of the female respondents reported no trust at all in the Riksdag, and another 38.2% and 36.2%, respectively, reported a moderate political trust. Young age, high education, unemployment, low generalized trust in other people, and lower levels of political trust were associated with cannabis smoking, even after multiple adjustments. The groups men with no trust at all in the Riksdag, and women with high trust, not particularly high political trust and no political trust at all had significantly higher odds ratios of cannabis smoking than the very high trust reference category. The results thus somewhat differed between men and women. Low political trust is associated with cannabis smoking, independently of trust in people in general.

[Trust in organizations concerned with risks of the Great East Japan Earthquake].

PubMed

Nakayachi, Kazuya; Kudo, Daisuke; Ozaki, Taku

2014-06-01

This study investigated the levels of public trust in organizations associated with the Great East Japan Earthquake. In Study 1 (N = 639), the levels of trust in eight organizations as well as the determinants of trust--perceived salient value similarity (SVS), ability, and motivation--were measured twice, first immediately after the earthquake and then a year later. The results indicated that the trust levels for six of the eight organizations had been preserved, supporting the double asymmetric effect of trust. The results of structural equation modeling (SEM) revealed that SVS explained trust more when the organization had been less trusted. Trust in the organization explains well the perceived reduction of the target risk. The results of SEM in Study 2 (N = 1,030) replicated those of Study 1, suggesting the stability of the explanatory power of the determinants of trust. Implications of the study for risk management practices are discussed.

System-wide versus component-specific trust using multiple aids.

PubMed

Keller, David; Rice, Stephen

2010-01-01

Previous research in operator trust toward automated aids has focused primarily on single aids. The current study focuses on how operator trust is affected by the presence of multiple aids. Two competing theories of multiple-trust are presented. A component-specific trust theory predicts that operators will differentially place their trust in automated aids that vary in reliability. A system-wide trust theory predicts that operators will treat multiple imperfect aids as one "system" and merge their trust across aids despite differences in the aids' reliability. A simulated flight task was used to test these theories, whereby operators performed a pursuit tracking task while concurrently monitoring multiple system gauges that were augmented with perfect or imperfect automated aids. The data revealed that a system-wide trust theory best predicted the data; operators merged their trust across both aids, behaving toward a perfectly reliable aid in the same manner as they did towards unreliable aids.

The imagination maze

NASA Astrophysics Data System (ADS)

Welty, Scott; Rylander, Jeff

2001-05-01

Working off of a 10,000 Toyota TAPESTRY grant, 80 physics students at Maine East High School in Park Ridge, Illinois, spent the 1999-2000 school year building a gaint pool ball maze in the school's stairwell. The maze sits in a 10 × 11 × 1 ft recess in the wall. It features an 11-ft screwlift operated by a crank accessible to the passing student to raise the balls to the top where they then meander down four possible trails of copper tubing, performing a variety of physics tricks along the way. The project was a great lesson in organization, engineering, building, quality control, and of course, the laws of physics. The maze is now the "property" of all future AP physics classes whose job it will be to fine-tune, repair, replace, and generally take care of the maze.

Capable Copper Electrodeposition Process for Integrated Circuit - substrate Packaging Manufacturing

NASA Astrophysics Data System (ADS)

Ghanbari, Nasrin

This work demonstrates a capable reverse pulse deposition methodology to influence gap fill behavior inside microvia along with a uniform deposit in the fine line patterned regions for substrate packaging applications. Interconnect circuitry in IC substrate packages comprises of stacked microvia that varies in depth from 20microm to 100microm with an aspect ratio of 0.5 to 1.5 and fine line patterns defined by photolithography. Photolithography defined pattern regions incorporate a wide variety of feature sizes including large circular pad structures with diameter of 20microm - 200microm, fine traces with varying widths of 3microm - 30microm and additional planar regions to define a IC substrate package. Electrodeposition of copper is performed to establish the desired circuit. Electrodeposition of copper in IC substrate applications holds certain unique challenges in that they require a low cost manufacturing process that enables a void-free gap fill inside the microvia along with uniform deposition of copper on exposed patterned regions. Deposition time scales to establish the desired metal thickness for such packages could range from several minutes to few hours. This work showcases a reverse pulse electrodeposition methodology that achieves void-free gap fill inside the microvia and uniform plating in FLS (Fine Lines and Spaces) regions with significantly higher deposition rates than traditional approaches. In order to achieve this capability, systematic experimental and simulation studies were performed. A strong correlation of independent parameters that govern the electrodeposition process such as bath temperature, reverse pulse plating parameters and the ratio of electrolyte concentrations is shown to the deposition kinetics and deposition uniformity in fine patterned regions and gap fill rate inside the microvia. Additionally, insight into the physics of via fill process is presented with secondary and tertiary current simulation efforts. Such efforts lead to show "smart" control of deposition rate at the top and bottom of via to avoid void formation. Finally, a parametric effect on grain size and the ensuing copper metallurgical characteristics of bulk copper is also shown to enable high reliability substrate packages for the IC packaging industry.

How does trust affect patient preferences for participation in decision-making?

PubMed

Kraetschmer, Nancy; Sharpe, Natasha; Urowitz, Sara; Deber, Raisa B

2004-12-01

Does trust in physicians aid or hinder patient autonomy? We examine the relationship between trust in the recipient's doctor, and desire for a participative role in decisions about medical treatment. We conducted a cross-sectional survey in an urban Canadian teaching hospital. A total of 606 respondents in three clinics (breast cancer, prostate cancer, fracture) completed questionnaires. The instrument included the Problem Solving Decision Making (PSDM) Scale, which used two vignettes (current health condition, chest pain) to categorize respondents by preferred role, and the Trust-in-Physician Scale. Few respondents preferred an autonomous role (2.9% for the current health condition vignette and 1.2% for the chest pain vignette); most preferred shared decision-making (DM) (67.3% current health condition; 48.7% chest pain) or a passive role (29.6% current health condition; 50.1% chest pain). Trust-in-physician yielded 6.3% with blind trust, 36.1% with high trust, 48.6% moderate trust and 9.0% low trust. As hypothesized, autonomous patients had relatively low levels of trust, passive respondents were more likely to have blind trust, while shared respondents had high but not excessive trust. Trust had a significant influence on preferred role even after controlling for the demographic factors such as sex, age and education. Very few respondents wish an autonomous role; those who do tend to have lower trust in their providers. Familiarity with a clinical condition increases desire for a shared (as opposed to passive) role. Shared DM often accompanies, and may require, a trusting patient-physician relationship.

Organizational and technological correlates of nurses’ trust in a smart IV pump

PubMed Central

Montague, Enid; Asan, Onur; Chiou, Erin

2013-01-01

The aim of this study was to understand technology and system characteristics that contribute to nurses’ ratings of trust in a smart IV pump. Nurse’s trust in new technologies can influence how technologies are used. Trust in technology is defined as a person’s belief that a technology will not fail them. Potential outcomes of trust in technology are appropriate trust, over trust, distrust, and mistrust. Trust in technology is also related to several use specific outcomes, including appropriate use and inappropriate use such as over reliance, disuse or rejection, or misuse. Understanding trust in relation to outcomes can contribute to designs that facilitate appropriate trust in new technologies. A survey was completed by 391 nurses a year after the implementation of a new smart IV pump. The survey assessed trust in the IV pump and other elements of the sociotechnical system, individual characteristics, technology characteristics and organizational characteristics. Results show perceptions of usefulness, safety, ease of use and usability are related to ratings of trust in smart IV pumps. Other work system factors such as perception of work environment, age, experience, quality of work, and perception of work performance are also related to ratings of trust. Nurses’ trust in smart IV pumps is influenced by both characteristics of the technology and the sociotechnical system. Findings from this research have implications for the design of future smart IV pumps and health systems. Recommendations for appropriately trustworthy smart IV pumps are discussed. Findings also have implications for how trust in health technologies can be measured and conceptualized in complex sociotechnical systems. PMID:23321482

Trust and Society: Suggestions for Further Development of Niklas Luhmann's Theory of Trust.

PubMed

Morgner, Christian

2018-05-01

This paper addresses an apparent gap in the work of Niklas Luhmann. While the issue of trust continues to receive widespread attention in the social sciences, Luhmann's interest in this topic declined following the development of his systems theory. It is argued that this decline does not reflect any diminished relevance of trust for systems theory, but rather that the architectural remodeling of theory cannot easily be applied to the issue of trust. Here, the issue of trust is reconceptualized as a connection medium. This entails a reconstruction of Luhmann's early theory of trust, especially with regard to function and social positioning. In this context, trust can in turn be linked to the concept of medium in Luhmann's late work. As a connection medium, trust mediates between the different levels of sociality-interaction, organization, and society. These theoretical considerations are employed to develop a more applied framework for empirical research, with a brief case study from southern Italy. From this perspective, the idea of trust as society's glue is seen to be overly simplistic. The common ethical understanding that more trust leads to a better society is also questioned on the grounds that social cooperation can also lead to social sclerosis. Finally, risk and trust are shown to accommodate the formation of different cultures of trust. The paper shows how Luhmann's updated version of trust can inspire current research and enhance our understanding of how trust operates in contemporary society. © 2018 Canadian Sociological Association/La Société canadienne de sociologie.

The 'dark side' of social capital: trust and self-rated health in European countries.

PubMed

Campos-Matos, Inês; Subramanian, S V; Kawachi, Ichiro

2016-02-01

Generalized interpersonal trust (as an indicator of social capital) has been linked to health status at both the individual and ecological level. We sought to examine how changes in contextual and individual trust are associated with changes in self-rated health in the European Social Surveys 2002-12. A multilevel analysis using a variance components model was performed on 203 452 individuals nested within 145 country cohorts covering 35 countries. Conditional on sociodemographic covariates, we sought to examine the association between self-rated health and individual trust, country average trust and a cross-level interaction between the two. Although individual trust perceptions were significantly correlated with self-rated health [OR = 0.95, 95% confidence interval (0.94-0.96)], country-level trust was not associated [OR = 1.12, 95% confidence interval (0.95-1.32)]. There was, however, a strong crosslevel interaction between contextual and individual trust (P < 0.001), such that individuals with high interpersonal trust reported better health in contexts in which other individuals expressed high average interpersonal trust. Conversely, low trust individuals reported worse health in high trust contexts. Our findings suggest that contexts with increasing average trust can be harmful for low trust individuals, which might reflect the negative impact that social capital can have in certain groups. These findings suggest that contextual trust has a complex role in explaining health inequalities and individual self-rated health. © The Author 2015. Published by Oxford University Press on behalf of the European Public Health Association. All rights reserved.

25 CFR 1000.366 - Can the Department conduct more than one trust evaluation per Tribe per year?

Code of Federal Regulations, 2010 CFR

2010-04-01

... AMENDMENTS TO THE INDIAN SELF-DETERMINATION AND EDUCATION ACT Trust Evaluation Review Annual Trust Evaluations § 1000.366 Can the Department conduct more than one trust evaluation per Tribe per year? Trust... 25 Indians 2 2010-04-01 2010-04-01 false Can the Department conduct more than one trust evaluation...

An Investigation of Children's Peer Trust across Culture: Is the Composition of Peer Trust Universal?

ERIC Educational Resources Information Center

Betts, Lucy R.; Rotenberg, Ken J.; Petrocchi, Serena; Lecciso, Flavia; Sakai, Atsushi; Maeshiro, Kazumi; Judson, Helen

2014-01-01

The components of children's trust in same-gender peers (trust beliefs, ascribed trustworthiness, and dyadic reciprocal trust) were examined in samples of 8-11-year-olds from the UK, Italy, and Japan. Trust was assessed by children's ratings of the extent to which same-gender classmates kept promises and kept secrets. Social relations analyses…

26 CFR 1.643(a)-6 - Income of foreign trust.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 26 Internal Revenue 8 2010-04-01 2010-04-01 false Income of foreign trust. 1.643(a)-6 Section 1... (CONTINUED) INCOME TAXES Estates, Trusts, and Beneficiaries § 1.643(a)-6 Income of foreign trust. (a) Distributable net income of a foreign trust. In the case of a foreign trust (see section 7701(a)(31)), the...

36 CFR 1011.4 - What notice will the Presidio Trust send to a debtor when collecting a debt?

Code of Federal Regulations, 2010 CFR

2010-07-01

... PRESIDIO TRUST DEBT COLLECTION Procedures To Collect Presidio Trust Debts § 1011.4 What notice will the Presidio Trust send to a debtor when collecting a debt? (a) Notice requirements. The Presidio Trust will aggressively collect debts. The Presidio Trust will send at least one written notice to a debtor informing the...