The role of anthropometry in designing for sustainability.

PubMed

Nadadur, Gopal; Parkinson, Matthew B

2013-01-01

An understanding of human factors and ergonomics facilitates the design of artefacts, tasks and environments that fulfil their users' physical and cognitive requirements. Research in these fields furthers the goal of efficiently accommodating the desired percentage of user populations through enhanced awareness and modelling of human variability. Design for sustainability (DfS) allows for these concepts to be leveraged in the broader context of designing to minimise negative impacts on the environment. This paper focuses on anthropometry and proposes three ways in which its consideration is relevant to DfS: reducing raw material consumption, increasing usage lifetimes and ethical human resource considerations. This is demonstrated through the application of anthropometry synthesis, virtual fitting, and sizing and adjustability allocation methods in the design of an industrial workstation seat for use in five distinct global populations. This work highlights the importance of and opportunities for using ergonomic design principles in DfS efforts. This research demonstrates the relevance of some anthropometry-based ergonomics concepts to the field of design for sustainability. A global design case study leverages human variability considerations in furthering three sustainable design goals: reducing raw material consumption, increasing usage lifetimes and incorporating ethical human resource considerations in design.

Investigation of model-based physical design restrictions (Invited Paper)

NASA Astrophysics Data System (ADS)

Lucas, Kevin; Baron, Stanislas; Belledent, Jerome; Boone, Robert; Borjon, Amandine; Couderc, Christophe; Patterson, Kyle; Riviere-Cazaux, Lionel; Rody, Yves; Sundermann, Frank; Toublan, Olivier; Trouiller, Yorick; Urbani, Jean-Christophe; Wimmer, Karl

2005-05-01

As lithography and other patterning processes become more complex and more non-linear with each generation, the task of physical design rules necessarily increases in complexity also. The goal of the physical design rules is to define the boundary between the physical layout structures which will yield well from those which will not. This is essentially a rule-based pre-silicon guarantee of layout correctness. However the rapid increase in design rule requirement complexity has created logistical problems for both the design and process functions. Therefore, similar to the semiconductor industry's transition from rule-based to model-based optical proximity correction (OPC) due to increased patterning complexity, opportunities for improving physical design restrictions by implementing model-based physical design methods are evident. In this paper we analyze the possible need and applications for model-based physical design restrictions (MBPDR). We first analyze the traditional design rule evolution, development and usage methodologies for semiconductor manufacturers. Next we discuss examples of specific design rule challenges requiring new solution methods in the patterning regime of low K1 lithography and highly complex RET. We then evaluate possible working strategies for MBPDR in the process development and product design flows, including examples of recent model-based pre-silicon verification techniques. Finally we summarize with a proposed flow and key considerations for MBPDR implementation.

A Guide for Planning Indoor Facilities for College Physical Education.

ERIC Educational Resources Information Center

Crawford, Wayne H.

Following a general consideration of the functional aspects of planning facilities and the relationship between program and facilities, a detailed presentation is made of planning buildings for college and university indoor physical education activities. Recommendations are made with regard to design, structural and functional features of…

Integrated communication and control systems. II - Design considerations

NASA Technical Reports Server (NTRS)

Ray, Asok; Halevi, Yoram

1988-01-01

The ICCS design issues for nonperiodic and stochastic delays are addressed and the framework for alternative design procedures is outlined. The impact of network-induced delays on system stability is investigated and their physical significance is demonstrated using a simulation. The negative effects of vacant sampling and message rejection at the controller are demonstrated.

Considerations in the design of a communication network for an autonomously managed power system

NASA Technical Reports Server (NTRS)

Mckee, J. W.; Whitehead, Norma; Lollar, Louis

1989-01-01

The considerations involved in designing a communication network for an autonomously managed power system intended for use in space vehicles are examined. An overview of the design and implementation of a communication network implemented in a breadboard power system is presented. An assumption that the monitoring and control devices are distributed but physically close leads to the selection of a multidrop cable communication system. The assumption of a high-quality communication cable in which few messages are lost resulted in a simple recovery procedure consisting of a time out and retransmit process.

Review of physical activity measurement using accelerometers in older adults: considerations for research design and conduct.

PubMed

Murphy, Susan L

2009-02-01

Accelerometers are being increasingly used in studies of physical activity (PA) among older adults, however the use of these monitors requires some specialized knowledge and up-to-date information on technological innovations. The purpose of this review article is to provide researchers with a guide to some commonly-used accelerometers in order to better design and conduct PA research with older adults. A literature search was conducted to obtain all available literature on commonly-used accelerometers in older adult samples with specific attention to articles discussing research design. The use of accelerometers in older adults requires a basic understanding of the type being used, rationale for their placement, and attention to calibration when needed. The updated technology in some monitors should make study conduct less difficult, however comparison studies of the newer versus the older generation models will be needed. Careful considerations for design and conduct of accelerometer research as outlined in this review should help to enhance the quality and comparability of future research studies.

Evaluating Effectiveness of a Frigate in an Anti-Air Warfare (AAW) Environment

DTIC Science & Technology

2016-06-01

missions to accomplish. Both studies are used in ship design to determine the ship’s required combat capabilities before finalizing the hull design. This...accomplish. Both studies are used in ship design to determine the ship’s required combat capabilities before finalizing the hull design. This...capabilities should be determined before the ship’s hull design is complete to make operational effectiveness independent from physical design considerations

Composite structural materials. [aircraft applications

NASA Technical Reports Server (NTRS)

Ansell, G. S.; Loewy, R. G.; Wiberley, S. E.

1981-01-01

The development of composite materials for aircraft applications is addressed with specific consideration of physical properties, structural concepts and analysis, manufacturing, reliability, and life prediction. The design and flight testing of composite ultralight gliders is documented. Advances in computer aided design and methods for nondestructive testing are also discussed.

Considerations for Integration of Physically Handicapped and Non-Handicapped Preschool Children.

ERIC Educational Resources Information Center

Cormack, Elizabeth O.

Eight physically handicapped (blind, spina bifida, cerebral palsy, or genetic defect) preschool children and eight children with normal sensory motor abilities (mean age of both groups 3 1/2 years) participated in a preschool demonstration project designed to promote equal educational and social experiences in an integrated preschool through the…

Library Media Center Design Considerations for Physically Disabled Students.

ERIC Educational Resources Information Center

Moy, Patricia J.

Federal legislation ensures that children with physical disabilities should not be denied access to the school library. These children have the same information needs as their peers, and they want equal access to information in the school library media center. To create an accessible and functional school library, many requirements and…

EVA Physiology and Medical Considerations Working in the Suit

NASA Technical Reports Server (NTRS)

Parazynski, Scott

2012-01-01

This "EVA Physiology and Medical Considerations Working in the Suit" presentation covers several topics related to the medical implications and physiological effects of suited operations in space from the perspective of a physician with considerable first-hand Extravehicular Activity (EVA) experience. Key themes include EVA physiology working in a pressure suit in the vacuum of space, basic EVA life support and work support, Thermal Protection System (TPS) inspections and repairs, and discussions of the physical challenges of an EVA. Parazynski covers the common injuries and significant risks during EVAs, as well as physical training required to prepare for EVAs. He also shares overall suit physiological and medical knowledge with the next generation of Extravehicular Mobility Unit (EMU) system designers.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chou, Weiren

This paper discusses the cost consideration and a possible construction timeline of the CEPC-SPPC study based on a preliminary conceptual design that is being carried out at the Institute of High Energy Physics (IHEP) in China.

Preliminary design of turbopumps and related machinery

NASA Technical Reports Server (NTRS)

Wislicenus, George F.

1986-01-01

Pumps used in large liquid-fuel rocket engines are examined. The term preliminary design denotes the initial, creative phases of design, where the general shape and characteristics of the machine are determined. This compendium is intended to provide the design engineer responsible for these initial phases with a physical understanding and background knowledge of the numerous special fields involved in the design process. Primary attention is directed to the pumping part of the turbopump and hence is concerned with essentially incompressible fluids. However, compressible flow principles are developed. As much as possible, the simplicity and reliability of incompressible flow considerations are retained by treating the mechanics of compressible fluids as a departure from the theory of incompressible fluids. Five areas are discussed: a survey of the field of turbomachinery in dimensionless form; the theoretical principles of the hydrodynamic design of turbomachinery; the hydrodynamic and gas dynamic design of axial flow turbomachinery; the hydrodynamic and gas dynamic design of radial and mixed flow turbomachinery; and some mechanical design considerations of turbomachinery. Theoretical considerations are presented with a relatively elementary mathematical treatment.

Photovoltaic central station step and touch potential considerations in grounding system design

NASA Technical Reports Server (NTRS)

Engmann, G.

1983-01-01

The probability of hazardous step and touch potentials is an important consideration in central station grounding system design. Steam turbine generating station grounding system design is based on accepted industry practices and there is extensive in-service experience with these grounding systems. A photovoltaic (PV) central station is a relatively new concept and there is limited experience with PV station grounding systems. The operation and physical configuration of a PV central station is very different from a steam electric station. A PV station bears some similarity to a substation and the PV station step and touch potentials might be addressed as they are in substation design. However, the PV central station is a generating station and it is appropriate to examine the effect that the differences and similarities of the two types of generating stations have on step and touch potential considerations.

Materials Selection. Resources in Technology.

ERIC Educational Resources Information Center

Technology Teacher, 1991

1991-01-01

This learning activity develops algorithms to ensure that the process of selecting materials is well defined and sound. These procedures require the use of many databases to provide the designer with information such as physical, mechanical, and chemical properties of the materials under consideration. A design brief, student quiz, and five…

Report from the Integrated Modeling Panel at the Workshop on the Science of Ignition on NIF

DOE Office of Scientific and Technical Information (OSTI.GOV)

Marinak, M; Lamb, D

2012-07-03

This section deals with multiphysics radiation hydrodynamics codes used to design and simulate targets in the ignition campaign. These topics encompass all the physical processes they model, and include consideration of any approximations necessary due to finite computer resources. The section focuses on what developments would have the highest impact on reducing uncertainties in modeling most relevant to experimental observations. It considers how the ICF codes should be employed in the ignition campaign. This includes a consideration of how the experiments can be best structured to test the physical models the codes employ.

Mechanical design of DNA nanostructures.

PubMed

Castro, Carlos E; Su, Hai-Jun; Marras, Alexander E; Zhou, Lifeng; Johnson, Joshua

2015-04-14

Structural DNA nanotechnology is a rapidly emerging field that has demonstrated great potential for applications such as single molecule sensing, drug delivery, and templating molecular components. As the applications of DNA nanotechnology expand, a consideration of their mechanical behavior is becoming essential to understand how these structures will respond to physical interactions. This review considers three major avenues of recent progress in this area: (1) measuring and designing mechanical properties of DNA nanostructures, (2) designing complex nanostructures based on imposed mechanical stresses, and (3) designing and controlling structurally dynamic nanostructures. This work has laid the foundation for mechanically active nanomachines that can generate, transmit, and respond to physical cues in molecular systems.

Design elements in implementation research: a structured review of child welfare and child mental health studies.

PubMed

Landsverk, John; Brown, C Hendricks; Rolls Reutz, Jennifer; Palinkas, Lawrence; Horwitz, Sarah McCue

2011-01-01

Implementation science is an emerging field of research with considerable penetration in physical medicine and less in the fields of mental health and social services. There remains a lack of consensus on methodological approaches to the study of implementation processes and tests of implementation strategies. This paper addresses the need for methods development through a structured review that describes design elements in nine studies testing implementation strategies for evidence-based interventions addressing mental health problems of children in child welfare and child mental health settings. Randomized trial designs were dominant with considerable use of mixed method designs in the nine studies published since 2005. The findings are discussed in reference to the limitations of randomized designs in implementation science and the potential for use of alternative designs.

A hydroponic design for microgravity and gravity installations

NASA Technical Reports Server (NTRS)

Fielder, Judith; Leggett, Nickolaus

1990-01-01

A hydroponic system is presented that is designed for use in microgravity or gravity experiments. The system uses a sponge-like growing medium installed in tubular modules. The modules contain the plant roots and manage the flow of the nutrient solution. The physical design and materials considerations are discussed, as are modifications of the basic design for use in microgravity or gravity experiments. The major external environmental requirements are also presented.

Automated Circulation Systems in Libraries Serving the Blind and Physically Handicapped: A Reference Guide for Planning.

ERIC Educational Resources Information Center

Wanger, Judith; And Others

Designed to facilitate communications in future automation projects between library and data processing personnel, especially those projects involving the use of automated systems in the service of disabled patrons, this guide identifies and describes a master set of major circulation system requirements and design considerations, and illustrates…

Anxieties, Preferences, Expectations and Opinions of Pre-Service Teachers Related to Physics Laboratory

ERIC Educational Resources Information Center

Berber, Nilufer Cerit

2013-01-01

Science anxiety, which is one of the affective dimensions in science learning, is one of the factors affecting success in Science and has been studied for 35 years. The existence of considerable negative attitudes towards Physics courses, which is one of the basic branches of Science, is a fact. This research has been designed to identify the…

High Energy Colliders

NASA Astrophysics Data System (ADS)

Palmer, R. B.; Gallardo, J. C.

INTRODUCTION PHYSICS CONSIDERATIONS GENERAL REQUIRED LUMINOSITY FOR LEPTON COLLIDERS THE EFFECTIVE PHYSICS ENERGIES OF HADRON COLLIDERS HADRON-HADRON MACHINES LUMINOSITY SIZE AND COST CIRCULAR e^{+}e^- MACHINES LUMINOSITY SIZE AND COST e^{+}e^- LINEAR COLLIDERS LUMINOSITY CONVENTIONAL RF SUPERCONDUCTING RF AT HIGHER ENERGIES γ - γ COLLIDERS μ ^{+} μ^- COLLIDERS ADVANTAGES AND DISADVANTAGES DESIGN STUDIES STATUS AND REQUIRED R AND D COMPARISION OF MACHINES CONCLUSIONS DISCUSSION

Design consideration of resonance inverters with electro-technological application

NASA Astrophysics Data System (ADS)

Hinov, Nikolay

2017-12-01

This study presents design consideration of resonance inverters with electro-technological application. The presented methodology was achieved as a result of investigations and analyses of different types and working regimes of resonance inverters, made by the author. Are considered schemes of resonant inverters without inverse diodes. The first harmonic method is used in the analysis and design. This method for the case of inverters with electro-technological application gives very good accuracy. This does not require the use of a complex and heavy mathematical apparatus. The proposed methodology is easy to use and is suitable for use in training students in power electronics. Authenticity of achieved results is confirmed by simulating and physical prototypes research work.

Interaction devices for hands-on desktop design

NASA Astrophysics Data System (ADS)

Ju, Wendy; Madsen, Sally; Fiene, Jonathan; Bolas, Mark T.; McDowall, Ian E.; Faste, Rolf

2003-05-01

Starting with a list of typical hand actions - such as touching or twisting - a collection of physical input device prototypes was created to study better ways of engaging the body and mind in the computer aided design process. These devices were interchangeably coupled with a graphics system to allow for rapid exploration of the interplay between the designer's intent, body motions, and the resulting on-screen design. User testing showed that a number of key considerations should influence the future development of such devices: coupling between the physical and virtual worlds, tactile feedback, and scale. It is hoped that these explorations contribute to the greater goal of creating user interface devices that increase the fluency, productivity and joy of computer-augmented design.

Fundamentals of Sports Analytics.

PubMed

Wasserman, Erin B; Herzog, Mackenzie M; Collins, Christy L; Morris, Sarah N; Marshall, Stephen W

2018-07-01

Recently, the importance of statistics and analytics in sports has increased. This review describes measures of sports injury and fundamentals of sports injury research with a brief overview of some of the emerging measures of sports performance. We describe research study designs that can be used to identify risk factors for injury, injury surveillance programs, and common measures of injury risk and association. Finally, we describe measures of physical performance and training and considerations for using these measures. This review provides sports medicine clinicians with an understanding of current research measures and considerations for designing sports injury research studies. Copyright © 2018 Elsevier Inc. All rights reserved.

Considerations for planning and conducting clinic-based research in physical therapy.

PubMed

Fitzgerald, G K; Delitto, A

2001-08-01

There is growing demand to increase the volume of clinic-based research in physical therapy. Special considerations, unique to the planning and conduct of clinic-based research, need to be addressed to increase the likelihood that these studies will be completed successfully. The purposes of this perspective are to discuss factors affecting clinic-based research and to offer suggestions for addressing these problems when designing and conducting research studies in a clinical setting. This perspective discusses issues such as patient management, determining the availability of target patient populations, acquiring support from physical therapists and physicians, reporting and managing research-related injury or illness, and modifying or terminating projects. Some of the points made in this perspective are illustrated using examples from the authors' experiences in conducting clinical research.

77 FR 43796 - Endangered and Threatened Wildlife and Plants; Designation of Critical Habitat for the Lost River...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-26

... essential to the conservation of the species should be included in the designation and why; (c) Special management considerations or protection that may be needed for the physical and biological features essential... our criteria for being essential for the conservation of the species and, therefore, should be...

The physics of proton therapy.

PubMed

Newhauser, Wayne D; Zhang, Rui

2015-04-21

The physics of proton therapy has advanced considerably since it was proposed in 1946. Today analytical equations and numerical simulation methods are available to predict and characterize many aspects of proton therapy. This article reviews the basic aspects of the physics of proton therapy, including proton interaction mechanisms, proton transport calculations, the determination of dose from therapeutic and stray radiations, and shielding design. The article discusses underlying processes as well as selected practical experimental and theoretical methods. We conclude by briefly speculating on possible future areas of research of relevance to the physics of proton therapy.

The physics of proton therapy

PubMed Central

Newhauser, Wayne D; Zhang, Rui

2015-01-01

The physics of proton therapy has advanced considerably since it was proposed in 1946. Today analytical equations and numerical simulation methods are available to predict and characterize many aspects of proton therapy. This article reviews the basic aspects of the physics of proton therapy, including proton interaction mechanisms, proton transport calculations, the determination of dose from therapeutic and stray radiations, and shielding design. The article discusses underlying processes as well as selected practical experimental and theoretical methods. We conclude by briefly speculating on possible future areas of research of relevance to the physics of proton therapy. PMID:25803097

Engineering Guide for Fire Protection and Detection Systems at Army Ammunition Plants. Volume 1. Selection and Design

DTIC Science & Technology

1980-12-01

type of personnel likely to he using them, (3) the physical environment , (4) health and operational safety considerations. Carefully selected portable...operated apparatus must have the battery and energy-limiting components located outside the hazardous environment , and be so constructed that a direct...designate effect on equipment or personnel), based upon the most severe result of personnel error, procedural deficiencies, environment , design

Optimization of Ballast Design: A Case Study of the Physics Entrepreneurship Program

NASA Astrophysics Data System (ADS)

Ding, Jun; Cheng, Norman; Lamouri, Abbas; Sulcs, Juris; Brown, Robert; Taylor, Cyrus

2001-10-01

This talk presents a typical internship project for students in the Physics Entrepreneurship Program at Case Western Reserve University. As part of their overall strategy, Advanced Lighting International (ADLT) is involved in the production of magnetic ballasts for metal halide lamps. The systems in which these ballasts function is undergoing rapid evolution, leading to the question of how the design of the ballasts can be optimized in order to deliver superior performance for lower cost. Addressing this question requires a full understanding of a variety of issues ranging from the basic modeling of the physics of the magnetic ballasts to questions of overall market strategy, manufacturing considerations, and the competitive environment.

Design Considerations for High Energy Electron -- Positron Storage Rings

DOE R&D Accomplishments Database

Richter, B.

1966-11-01

High energy electron-positron storage rings give a way of making a new attack on the most important problems of elementary particle physics. All of us who have worked in the storage ring field designing, building, or using storage rings know this. The importance of that part of storage ring work concerning tests of quantum electrodynamics and mu meson physics is also generally appreciated by the larger physics community. However, I do not think that most of the physicists working tin the elementary particle physics field realize the importance of the contribution that storage ring experiments can make to our understanding of the strongly interacting particles. I would therefore like to spend the next few minutes discussing the sort of things that one can do with storage rings in the strongly interacting particle field.

Computerized Adaptive Testing System Design: Preliminary Design Considerations.

DTIC Science & Technology

1982-07-01

the administrative or operational requirements of CAT and presented - # k*----.,ku nh-n.-utu (IPOI efi~g.2me (PMU tQ7q. vim NPRDC TR 82-52 July 1982...design model for a computerized adaptive testing ( CAT ) system was developed and presented through a series of hierarchy plus input-process-output (HIPO...physical system was addressed through brief discussions of hardware, software, interfaces, and personnel requirements. Further steps in CAT system

Classification, Properties, and Management of Aridisols.

ERIC Educational Resources Information Center

Mack, C. B.; And Others

1990-01-01

Described is a slide set which is designed to illustrate the entire range of soils found in the arid regions of the earth's surface. Information on physical and chemical soil properties, soil classification, and related soil management considerations for agricultural development are included. (CW)

Recent Developments in Positron Emission Tomography (PET) Instrumentation

DOE R&D Accomplishments Database

Derenzo, S. E.; Budinger, T. F.

1986-04-01

This paper presents recent detector developments and perspectives for positron emission tomography (PET) instrumentation used for medical research, as well as the physical processes in positron annihilation, photon scattering and detection, tomograph design considerations, and the potentials for new advances in detectors.

FAST FLUX TEST FACILITY CONCEPTUAL FACILTY DESIGN DESCRIPTION FOR THE INERT GAS CELL EXAMINATION FACILITY NO. 71

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

1968-12-12

The purpose of this Conceptual Facility Design Description (CFDD) is to provide a technical description of the Inert Gas Cell Examination Facility such that agreement with RDT on a Conceptual Design can be reached . The CFDD also serves to establish a common understanding of the facility concept among all responsible FFTF Project parties including the Architect Engineer and Reactor Designer. Included are functions and design requirements, a physical description of the facility, safety considerations, principles of operation, and maintenance principles.

An optimal system design process for a Mars roving vehicle

NASA Technical Reports Server (NTRS)

Pavarini, C.; Baker, J.; Goldberg, A.

1971-01-01

The problem of determining the optimal design for a Mars roving vehicle is considered. A system model is generated by consideration of the physical constraints on the design parameters and the requirement that the system be deliverable to the Mars surface. An expression which evaluates system performance relative to mission goals as a function of the design parameters only is developed. The use of nonlinear programming techniques to optimize the design is proposed and an example considering only two of the vehicle subsystems is formulated and solved.

Design and Calibration of an Airborne Multichannel Swept-Tuned Spectrum Analyzer

NASA Technical Reports Server (NTRS)

Hamory, Philip J.; Diamond, John K.; Bertelrud, Arild

1999-01-01

This paper describes the design and calibration of a four-channel, airborne, swept-tuned spectrum analyzer used in two hypersonic flight experiments for characterizing dynamic data up to 25 kHz. Built mainly from commercially available analog function modules, the analyzer proved useful for an application with limited telemetry bandwidth, physical weight and volume, and electrical power. The authors discuss considerations that affect the frequency and amplitude calibrations, limitations of the design, and example flight data.

Infection prevention and control in the design of healthcare facilities.

PubMed

Farrow, Tye S; Black, Stephen M

2009-01-01

The lead paper, "Healthcare-Associated Infections as Patient Safety Indicators," written by Gardam, Lemieux, Reason, van Dijk and Goel, puts forward the design of healthcare facilities as one of many strategies to improve patient safety with respect to healthcare-associated infections. This commentary explores some of the issues in balancing infection prevention and control priorities with other needs and values brought to the design process. This balance is challenged not only by a lack of supporting evidence but also by the superficial nature in which infection prevention and control are often discussed within a design context. For the physical environment to support any patient safety initiative, the design of the processes must be developed in conjunction with that of the physical environment so that compliance can be natural and convenient. Finally, consideration is given to the value of documenting decision-making related to infection prevention and control in facility design and ongoing assessments of existing facilities.

2009 Linear Collider Workshop of the Americas

DOE Office of Scientific and Technical Information (OSTI.GOV)

Seidel, Sally

The 2009 Linear Collider Workshop of the Americas was held on the campus of the University of New Mexico from 29 September to 3 October, 2009. This was a joint meeting of the American Linear Collider Physics Group and the ILC Global Design Effort. Two hundred fifty people attended. The number of scientific contributions was 333. The complete agenda, with links to all of the presentations, is available at physics.unm.edu/LCWA09/. The meeting brought together international experts as well as junior scientists, to discuss the physics potential of the linear collider and advances in detector technology. The validation of detector designsmore » was announced, and the detector design groups planned the next phase of the effort. Detector R&D teams reported on progress on many topics including calorimetry and tracking. Recent accelerator design considerations were discussed in a special session for experimentalists and theorists.« less

An Investigation of the Flow Physics of Acoustic Liners by Direct Numerical Simulation

NASA Technical Reports Server (NTRS)

Watson, Willie R. (Technical Monitor); Tam, Christopher

2004-01-01

This report concentrates on reporting the effort and status of work done on three dimensional (3-D) simulation of a multi-hole resonator in an impedance tube. This work is coordinated with a parallel experimental effort to be carried out at the NASA Langley Research Center. The outline of this report is as follows : 1. Preliminary consideration. 2. Computation model. 3. Mesh design and parallel computing. 4. Visualization. 5. Status of computer code development. 1. Preliminary Consideration.

Ranking of Cities According to Public Health Criteria: Pitfalls and Opportunities

PubMed Central

Ham, Sandra A.; Levin, Sarah; Zlot, Amy I.; Andrews, Richard R.; Miles, Rebecca

2004-01-01

Popular magazines often rank cities in terms of various aspects of quality of life. Such ranking studies can motivate people to visit or relocate to a particular city or increase the frequency with which they engage in healthy behaviors. With careful consideration of study design and data limitations, these efforts also can assist policymakers in identifying local public health issues. We discuss considerations in interpreting ranking studies that use environmental measures of a city population’s public health related to physical activity, nutrition, and obesity. Ranking studies such as those commonly publicized are constrained by statistical methodology issues and a lack of a scientific basis in regard to design. PMID:15053999

Sensor Network Middleware for Cyber-Physical Systems: Opportunities and Challenges

NASA Astrophysics Data System (ADS)

Singh, G.

2015-12-01

Wireless Sensor Network middleware typically provides abstractions for common tasks such as atomicity, synchronization and communication with the intention of isolating the developers of distributed applications from lower-level details of the underlying platforms. Developing middleware to meet the performance constraints of applications is an important challenge. Although one would like to develop generic middleware services which can be used in a variety of different applications, efficiency considerations often force developers to design middleware and algorithms customized to specific operational contexts. This presentation will discuss techniques to design middleware that is customizable to suit the performance needs of specific applications. We also discuss the challenges poised in designing middleware for pervasive sensor networks and cyber-physical systems with specific focus on environmental monitoring.

Maintaining High-Performance Schools after Construction or Renovation

ERIC Educational Resources Information Center

Luepke, Gary; Ronsivalli, Louis J., Jr.

2009-01-01

With taxpayers' considerable investment in schools, it is critical for school districts to preserve their community's assets with new construction or renovation and effective facility maintenance programs. "High-performance" school buildings are designed to link the physical environment to positive student achievement while providing such benefits…

Performance and operational considerations in the design of vehicle antennas for mobile satellite communications

NASA Technical Reports Server (NTRS)

Milne, R.

1995-01-01

This paper examines the vehicle antenna requirements for mobile satellite systems. The antenna parameters are discussed in the light of the requirements and the limitations in performance imposed by the physical constraints of antenna and by vehicle geometries. Measurements of diffraction and antenna noise temperature in an operational environment are examined, as well as their effects on system margins. Mechanical versus electronic designs are compared with regards to performance, cost, reliability, and design complexity. Comparisons between open-loop and close-loop tracking systems are made and the effects of bandwidth, sidelobe levels, operational constraints, vehicle angular velocity, and acceleration are discussed. Some consideration is given to the use of hybrid systems employing both open and closed-loop tracking. Changes to antenna/terminal specifications are recommended which will provide greater design flexibility and increase the likelihood of meeting the performance and operational requirements.

Conceptual design of a piloted Mars sprint life support system

NASA Technical Reports Server (NTRS)

Cullingford, H. S.; Novara, M.

1988-01-01

This paper presents the conceptual design of a life support system sustaining a crew of six in a piloted Mars sprint. The requirements and constraints of the system are discussed along with its baseline performance parameters. An integrated operation is achieved with air, water, and waste processing and supplemental food production. The design philosophy includes maximized reliability considerations, regenerative operations, reduced expendables, and fresh harvest capability. The life support system performance will be described with characteristics of the associated physical-chemical subsystems and a greenhouse.

Computer Science Concept Inventories: Past and Future

ERIC Educational Resources Information Center

Taylor, C.; Zingaro, D.; Porter, L.; Webb, K. C.; Lee, C. B.; Clancy, M.

2014-01-01

Concept Inventories (CIs) are assessments designed to measure student learning of core concepts. CIs have become well known for their major impact on pedagogical techniques in other sciences, especially physics. Presently, there are no widely used, validated CIs for computer science. However, considerable groundwork has been performed in the form…

Physical and Psychological Well-Being and University Student Satisfaction with E-Learning

ERIC Educational Resources Information Center

Johnson, Genevieve Marie

2015-01-01

Although research establishes that student characteristics exert considerable influence on learning outcomes, research concerned with e-learning satisfaction most typically focuses of factors associated with instructional design, curriculum and pedagogy. Fifty-eight first-year university e-students completed an online survey that queried their…

The Campus as a Total Community.

ERIC Educational Resources Information Center

Hunt, Robert E.

The myriad and complex health and safety needs of a college or university campus are discussed. Consideration is given to the demands of fire prevention, accident prevention, food service standards, and the mental and physical well-being of students, faculty, and staff. Structural and architectural concerns of the well-designed campus are…

Navigating through Number and Operations in Grades 9-12

ERIC Educational Resources Information Center

National Council of Teachers of Mathematics, 2006

2006-01-01

This book's activities probe rational and irrational numbers and investigate properties of integers and complex numbers. They explore numbers and operations embedded in physical objects and show how simple problems can lead to sophisticated considerations. Students examine the usefulness of irrational numbers in designing musical scales and of…

FEL (free-electron lasers) undulator technology and synchrotron radiation source requirements

DOE Office of Scientific and Technical Information (OSTI.GOV)

Robinson, K.; Quimby, D.; Slater, J.

This paper describes design and construction considerations of the THUNDER undulator, for use in free-electron laser experiments at visible wavelengths. For the parameters of these experiments, an unusually high degree of optimization of the electron-photon interaction is required and, as a result, THUNDER is built to especially high mechanical and magnetic precision. Except for its narrow magnet gap, the 5-meter THUNDER undulator is quite similar to insertion devices under consideration for the proposed 6-GeV storage ring. The engineering and physics approach adopted for this FEL modulator design is directly applicable to insertion device development. The tolerance limits to THUNDER, establishedmore » by modeling and design and achieved through careful control of mechanical and magnetic errors, are essential to the next generation of insertion devices.« less

Metal-free organic dyes for dye-sensitized solar cells: from structure: property relationships to design rules.

PubMed

Mishra, Amaresh; Fischer, Markus K R; Bäuerle, Peter

2009-01-01

Dye-sensitized solar cells (DSSC) have attracted considerable attention in recent years as they offer the possibility of low-cost conversion of photovoltaic energy. This Review focuses on recent advances in molecular design and technological aspects of metal-free organic dyes for applications in dye-sensitized solar cells. Special attention has been paid to the design principles of these dyes and on the effect of various electrolyte systems. Cosensitization, an emerging technique to extend the absorption range, is also discussed as a way to improve the performance of the device. In addition, we report on inverted dyes for photocathodes, which constitutes a relatively new approach for the production of tandem cells. Special consideration has been paid to the correlation between the molecular structure and physical properties to their performance in DSSCs.

Students' experiences with interactivity and learning in a high school physics multimedia distance learning course

NASA Astrophysics Data System (ADS)

Villarreal-Stewart, Irene

The purpose guiding this research has been to learn about and describe the phenomena of interactivity from the learners' perspectives and to learn which of the interactivity affordances and practices were actually used by students and why in the process of learning physics using an interactive multimedia distance learning course system. The bigger purpose behind learning about and describing interactivity has been to gain knowledge and perspective for its instructional design to benefit the learner, the school as curriculum implementer, and instructional media designers to create better products. Qualitative methodology in the interpretivist tradition was used, that is, in-depth interviews and on-site observations, to gain understanding of interactivity from the learners' perspective and to gain understanding of the student learning context impacting and shaping the students' interactivity experiences. NVivo was used to sort, organize and index data. All data were read on three levels: literally, interpretively, and reflexively; and were read comparatively to other perspectives to get descriptions and interpretations that were holistic to the implementation and had potential insight to improve practice for instructional designers, teachers, administrators, specifically to improve the learning experience for students. Site-Specific Findings: Students watched videos, resisted using phone and e-mail, and worked math problems to demonstrate learning, which resulted in very little interactivity, virtually no dialogue about physics, no physical activity, one-way communication, multifaceted dissatisfaction, student need for teacher involvement in the learning enterprise, student appreciation for interactivity, and expressed desire for a real, live teacher. I also found that some students did experience the system as interactive, did experience learner control and self-directed learning, and despite dissatisfaction, liked and appreciated the course. Wider Applications: Interactivity, a design element, requires scaffolding and nurturing in implementation. The variable and changing context of implementation suggests the requirement for its consideration in design work. The study suggests that during implementation the integrity of design as a whole and flexibility within the design are important continuing considerations. Recommendations. (1) implementation supervision by the school district, (2) use of a language and activity-based theory of learning and teaching and (3) dialogic inquiry (Wells, 1999) to continue learning about interactivity.

Considerations for human-machine interfaces in tele-operations

NASA Technical Reports Server (NTRS)

Newport, Curt

1991-01-01

Numerous factors impact on the efficiency of tele-operative manipulative work. Generally, these are related to the physical environment of the tele-operator and how he interfaces with robotic control consoles. The capabilities of the operator can be influenced by considerations such as temperature, eye strain, body fatigue, and boredom created by repetitive work tasks. In addition, the successful combination of man and machine will, in part, be determined by the configuration of the visual and physical interfaces available to the teleoperator. The design and operation of system components such as full-scale and mini-master manipulator controllers, servo joysticks, and video monitors will have a direct impact on operational efficiency. As a result, the local environment and the interaction of the operator with the robotic control console have a substantial effect on mission productivity.

Bat noseleaf model: echolocation function, design considerations, and experimental verification.

PubMed

Kuc, Roman

2011-05-01

This paper describes a possible bat noseleaf echolocation function that improves target elevation resolution. Bats with a protruding noseleaf can rotate the lancet to act as an acoustic mirror that reflects the nostril emission, modeled as a virtual nostril that produces a delayed emission. The cancellation of the nostril and virtual nostril components at a target produces a sharp spectral notch whose frequency location relates to target elevation. This notch can be observed directly from the swept-frequency emission waveform, suggesting cochlear processing capabilities. Physical acoustic principles indicate the design considerations and trade-offs that a bat can accomplish through noseleaf shape and emission characteristics. An experimental model verifies the analysis and exhibits an elevation versus notch frequency sensitivity of approximately 1°/kHz.

An Interdisciplinary Design Project in Second Life: Creating a Virtual Marine Science Learning Environment

ERIC Educational Resources Information Center

Triggs, Riley; Jarmon, Leslie; Villareal, Tracy A.

2010-01-01

Virtual environments can resolve many practical and pedagogical challenges within higher education. Economic considerations, accessibility issues, and safety concerns can all be somewhat alleviated by creating learning activities in a virtual space. Because of the removal of real-world physical limitations like gravity, durability and scope,…

Research in Chinese-English Machine Translation. Final Report.

ERIC Educational Resources Information Center

Wang, William S-Y.; And Others

This report documents results of a two-year effort toward the study and investigation of the design of a prototype system for Chinese-English machine translation in the general area of physics. Previous work in Chinese-English machine translation is reviewed. Grammatical considerations in machine translation are discussed and detailed aspects of…

AAHPER Research Consortium Symposium Papers: Socio-Psychological Dimensions, Research Design and Safety. Volume II, Book 3.

ERIC Educational Resources Information Center

Cox, Richard H., Ed.

This collection focuses on research topics in physical education and athletics and includes the following papers: Methodological Problems in the Assessment of Personality from the Psychoanalytic, Behavioral and Cognitive Positions; Some Factors Affecting the Performance of Women in Sports and Activity; Multivariate Considerations in Children's…

Practical Advice for Teachers and Coaches: Handling Acute Athletic Injuries

ERIC Educational Resources Information Center

Hunt, Kevin; Ormond, Tom; Griffin, Lisa; Maina, Michael; Jones, Christopher; Goldman, Alexander Steven; McMichael, Callaway

2016-01-01

Safety concerns are among the first considerations in the design and implementation of any curriculum. However, in the dynamic worlds of physical education and coaching, athletic injuries will inevitably arise, regardless of the proactive strategies in place. These situations will vary in nature, and the student's or athlete's risk of further…

A simulation of the atmospheric cloud physics laboratory to aid in its design and the design of the experiments within the laboratory

NASA Technical Reports Server (NTRS)

Winchester, L. W., Jr.

1980-01-01

Using the finite difference method with overrelaxation, numerical solutions of the steady-state vorticity transport equation were obtained for a continuous flow diffusion chamber of the Hudson-Squires type. The calculation neglected the effects due to temperature, gravity, and saturation. The size and shape of the manifold used to inject the aerosol laden flow were varied to obtain a design which would improve the performance of the chamber from strictly low Reynolds number (less than 20) fluid dynamical considerations.

A linearized theory method of constrained optimization for supersonic cruise wing design

NASA Technical Reports Server (NTRS)

Miller, D. S.; Carlson, H. W.; Middleton, W. D.

1976-01-01

A linearized theory wing design and optimization procedure which allows physical realism and practical considerations to be imposed as constraints on the optimum (least drag due to lift) solution is discussed and examples of application are presented. In addition to the usual constraints on lift and pitching moment, constraints are imposed on wing surface ordinates and wing upper surface pressure levels and gradients. The design procedure also provides the capability of including directly in the optimization process the effects of other aircraft components such as a fuselage, canards, and nacelles.

System Development Guidelines From a Review of Motion-Based Technology for People With Dementia or MCI

PubMed Central

Astell, Arlene J.; Czarnuch, Stephen; Dove, Erica

2018-01-01

As the population ages and the number of people living with dementia or mild cognitive impairment (MCI) continues to increase, it is critical to identify creative and innovative ways to support and improve their quality of life. Motion-based technology has shown significant potential for people living with dementia or MCI by providing opportunities for cognitive stimulation, physical activity and participation in meaningful leisure activities, while simultaneously functioning as a useful tool for research and development of interventions. However, many of the current systems created using motion-based technology have not been designed specifically for people with dementia or MCI. Additionally, the usability and accessibility of these systems for these populations has not been thoroughly considered. This paper presents a set of system development guidelines derived from a review of the state of the art of motion-based technologies for people with dementia or MCI. These guidelines highlight three overarching domains of consideration for systems targeting people with dementia or MCI: (i) cognitive, (ii) physical, and (iii) social. We present the guidelines in terms of relevant design and use considerations within these domains and the emergent design themes within each domain. Our hope is that these guidelines will aid in designing motion-based software to meet the needs of people with dementia or MCI such that the potential of these technologies can be realized. PMID:29867610

System Development Guidelines From a Review of Motion-Based Technology for People With Dementia or MCI.

PubMed

Astell, Arlene J; Czarnuch, Stephen; Dove, Erica

2018-01-01

As the population ages and the number of people living with dementia or mild cognitive impairment (MCI) continues to increase, it is critical to identify creative and innovative ways to support and improve their quality of life. Motion-based technology has shown significant potential for people living with dementia or MCI by providing opportunities for cognitive stimulation, physical activity and participation in meaningful leisure activities, while simultaneously functioning as a useful tool for research and development of interventions. However, many of the current systems created using motion-based technology have not been designed specifically for people with dementia or MCI. Additionally, the usability and accessibility of these systems for these populations has not been thoroughly considered. This paper presents a set of system development guidelines derived from a review of the state of the art of motion-based technologies for people with dementia or MCI. These guidelines highlight three overarching domains of consideration for systems targeting people with dementia or MCI: (i) cognitive, (ii) physical, and (iii) social. We present the guidelines in terms of relevant design and use considerations within these domains and the emergent design themes within each domain. Our hope is that these guidelines will aid in designing motion-based software to meet the needs of people with dementia or MCI such that the potential of these technologies can be realized.

The Impact of Visibility on Teamwork, Collaborative Communication, and Security in Emergency Departments: An Exploratory Study.

PubMed

Gharaveis, Arsalan; Hamilton, D Kirk; Pati, Debajyoti; Shepley, Mardelle

2017-01-01

The aim of this study was to examine the influence of visibility on teamwork, collaborative communication, and security issues in emergency departments (EDs). This research explored whether with high visibility in EDs, teamwork and collaborative communication can be improved while the security issues will be reduced. Visibility has been regarded as a critical design consideration and can be directly and considerably impacted by ED's physical design. Teamwork is one of the major related operational outcomes of visibility and involves nurses, support staff, and physicians. The collaborative communication in an ED is another important factor in the process of care delivery and affects efficiency and safety. Furthermore, security is a behavioral factor in ED designs, which includes all types of safety including staff safety, patient safety, and the safety of visitors and family members. This qualitative study investigated the impact of visibility on teamwork, collaborative communication, and security issues in the ED. One-on-one interviews and on-site observation sessions were conducted in a community hospital. Corresponding data analysis was implemented by using computer plan analysis, observation and interview content, and theme analyses. The findings of this exploratory study provided a framework to identify visibility as an influential factor in ED design. High levels of visibility impact productivity and efficiency of teamwork and communication and improve the chance of lowering security issues. The findings of this study also contribute to the general body of knowledge about the effect of physical design on teamwork, collaborative communication, and security.

Physics design of a 10 MeV injector test stand for an accelerator-driven subcritical system

NASA Astrophysics Data System (ADS)

Yan, Fang; Pei, Shilun; Geng, Huiping; Meng, Cai; Zhao, Yaliang; Sun, Biao; Cheng, Peng; Yang, Zheng; Ouyang, Huafu; Li, Zhihui; Tang, Jingyu; Wang, Jianli; Sui, Yefeng; Dai, Jianping; Sha, Peng; Ge, Rui

2015-05-01

The 10 MeV accelerator-driven subcritical system (ADS) Injector I test stand at Institute of High Energy Physics (IHEP) is a testing facility dedicated to demonstrate one of the two injector design schemes [Injector Scheme-I, which works at 325 MHz], for the ADS project in China. The injector is composed of two parts, the linac part and the beam dump line. The former is designed on the basis of 325 MHz four-vane type copper structure radio frequency quadrupole and superconducting (SC) spoke cavities with β =0.12 . The latter is designed to transport the beam coming out of the SC section of the linac to the beam dump, where the beam transverse profile is fairly enlarged and unformed to simplify the beam target design. The SC section consists of two cryomodules with 14 β =0.12 Spoke cavities, 14 solenoid and 14 BPMs in total. The first challenge in the physics design comes from the necessary space required for the cryomodule separation where the periodical lattice is destroyed at a relatively lower energy of ˜5 MeV . Another challenge is the beam dump line design, as it will be the first beam dump line being built by using a step field magnet for the transverse beam expansion and uniformity in the world. This paper gives an overview of the physics design study together with the design principles and machine construction considerations. The results of an optimized design, fabrication status and end to end simulations including machine errors are presented.

Obesity and episodic memory function.

PubMed

Loprinzi, Paul D; Frith, Emily

2018-04-17

Obesity-related lifestyle factors, such as physical activity behavior and dietary intake, have been shown to be associated with episodic memory function. From animal work, there is considerable biological plausibility linking obesity with worse memory function. There are no published systematic reviews evaluating the effects of obesity on episodic memory function among humans, and examining whether physical activity and diet influences this obesity-memory link. Thus, the purpose of this systematic review was to evaluate the totality of research examining whether obesity is associated with episodic memory function, and whether physical activity and dietary behavior confounds this relationship. A review approach was employed, using PubMed, PsychInfo, and Sports Discus databases. Fourteen studies met our criteria. Among these 14 reviewed studies, eight were cross-sectional, four were prospective, and two employed a randomized controlled experimental design. Twelve of the 14 studies did not take into consideration dietary behavior in their analysis, and similarly, nine of the 14 studies did not take into consideration participant physical activity behavior. Among the 14 studies, ten found an inverse association of weight status on memory function, but for one of these studies, this association was attenuated after controlling for physical activity. Among the 14 evaluated studies, four did not find a direct effect of weight status on memory. Among the four null studies, one, however, found an indirect effect of BMI on episodic memory and another found a moderation effect of BMI and age on memory function. It appears that obesity may be associated with worse memory function, with the underlying mechanisms discussed herein. At this point, it is uncertain whether adiposity, itself, is influencing memory changes, or rather, whether adiposity-related lifestyle behaviors (e.g., physical inactivity and diet) are driving the obesity-memory relationship.

MIUS community conceptual design study

NASA Technical Reports Server (NTRS)

Fulbright, B. E.

1976-01-01

The feasibility, practicality, and applicability of the modular integrated utility systems (MIUS) concept to a satellite new-community development with a population of approximately 100,000 were analyzed. Two MIUS design options, the 29-MIUS-unit (option 1) and the 8-MIUS-unit (option 2) facilities were considered. Each resulted in considerable resource savings when compared to a conventional utility system. Economic analyses indicated that the total cash outlay and operations and maintenance costs for these two options were considerably less than for a conventional system. Computer analyses performed in support of this study provided corroborative data for the study group. An environmental impact assessment was performed to determine whether the MIUS meets or will meet necessary environmental standards. The MIUS can provide improved efficiency in the conservation of natural resources while not adversely affecting the physical environment.

Occupational Stress, Negative Affectivity and Physical Health in Special and General Education Teachers in Greece

ERIC Educational Resources Information Center

Lazuras, Lambros

2006-01-01

Teacher stress has attracted considerable attention, yet few studies have focused on special education teachers. This article, by Lambros Lazuras of the South-East European Research Centre (SEERC) in Thessaloniki, reports research designed to explore differences in the stress levels of general and special educators in Greece and provides…

A Barrier-Free Home: Considerations and Recommendations for Design. Information Support Packet #3.

ERIC Educational Resources Information Center

Stevens, John H.

This guide is intended to assist people with physical disabilities who are wheelchair users and their families in the construction of a barrier-free home. Introductory information notes the importance of specific planning for individual needs and full participation by the homeowner as well as the architect and contractor. Briefly addressed are:…

Multireceiver Acoustic Communications in Time-Varying Environments

DTIC Science & Technology

2014-06-01

Canberra, ACT, 2012, pp. 1–7. [7] W. Chen and F. Yanjun, “Physical layer design consideration for underwater acoustic sensor networks ,”3rd IEEE Int...analysis of underwater acoustic MIMO communications,”OCEANS, Sydney, NSW, 2010, pp. 1–8. [9] Wines lab (2013). Wireless networks and embedded... NETWORKS ......................................................................3 B. CHALLENGES OF UNDERWATER ACOUSTIC COMMUNICATIONS

Preliminary space station solar array structural design study

NASA Technical Reports Server (NTRS)

Dorsey, J. T.; Bush, H. G.; Mikulas, M. M., Jr.

1984-01-01

Structurally efficient ways to support the large solar arrays (3,716 square meters which are currently considered for space station use) are examined. An erectable truss concept is presented for the on orbit construction of winged solar arrays. The means for future growth, maintenance, and repair are integrally designed into this concept. Results from parametric studies, which highlight the physical and structural differences between various configuration options are presented. Consideration is given to both solar blanket and hard panel arrays.

Preliminary space station solar array structural design study

NASA Astrophysics Data System (ADS)

Dorsey, J. T.; Bush, H. G.; Mikulas, M. M., Jr.

Structurally efficient ways to support the large solar arrays (3,716 square meters which are currently considered for space station use) are examined. An erectable truss concept is presented for the on orbit construction of winged solar arrays. The means for future growth, maintenance, and repair are integrally designed into this concept. Results from parametric studies, which highlight the physical and structural differences between various configuration options are presented. Consideration is given to both solar blanket and hard panel arrays.

Spanking and child outcomes: Old controversies and new meta-analyses.

PubMed

Gershoff, Elizabeth T; Grogan-Kaylor, Andrew

2016-06-01

Whether spanking is helpful or harmful to children continues to be the source of considerable debate among both researchers and the public. This article addresses 2 persistent issues, namely whether effect sizes for spanking are distinct from those for physical abuse, and whether effect sizes for spanking are robust to study design differences. Meta-analyses focused specifically on spanking were conducted on a total of 111 unique effect sizes representing 160,927 children. Thirteen of 17 mean effect sizes were significantly different from zero and all indicated a link between spanking and increased risk for detrimental child outcomes. Effect sizes did not substantially differ between spanking and physical abuse or by study design characteristics. (PsycINFO Database Record (c) 2016 APA, all rights reserved).

Artificial gravity studies and design considerations for Space Station centrifuges

NASA Technical Reports Server (NTRS)

Halstead, T. W.; Brown, A. H.; Fuller, C. A.; Oyama, J.

1984-01-01

The requirements to and capabilities of a Space Station biological facility centrifuge are discussed on the basis of an assessment of the objectives and subjects of future microgravity biological experiments. It is argued that the facility should be capable of both acute and extended chronic exposure of test subjects and biological materials to altered-g loading. In addition, the experimental approaches and equipment for microgravity studies on a Space Station are outlined. Finally, the engineering requirements of such a centrifuge are examined, with consideration of radial gravity gradients, size, and physical access to animals.

An Apollo compatible cloud physics experiment.

NASA Technical Reports Server (NTRS)

Eaton, L. R.; Hollinden, A. B.; Satterblom, P. R.

1973-01-01

Consideration of the utilization of a low-gravity environment to obtain experimental information, in the area of cloud microphysics, which cannot be obtained in ground laboratories. The experiment discussed is designed to obtain quantitative answers about evaporation and breakup of salt particles from ocean spray and other sources. In addition to salt nuclei distribution mechanisms, this breakup has ecological importance in relation to the spreading of salt mists from salted highways and spreading of brine cooling tower spray from electrical power generation plants. This experiment is being submitted for consideration on the Apollo-Soyuz Test Program in 1975.

Design of a Minimum Surface-Effect Three Degree-of-Freedom Micromanipulator

NASA Technical Reports Server (NTRS)

Goldfarb, Michael; Speich, John E.

1997-01-01

This paper describes the fundamental physical motivations for small-scale minimum surface-effect design, and presents a three degree-of-freedom micromanipulator design that incorporates a minimum surface-effect approach. The primary focus of the design is the split-tube flexure, a unique small-scale revolute joint that exhibits a considerably larger range of motion and significantly better multi-axis revolute joint characteristics than a conventional flexure. The development of this joint enables the implementation of a small-scale spatially-loaded revolute joint-based manipulator with well-behaved kinematic characteristics and without the backlash and stick-slip behavior that would otherwise prevent precision control

Study of the application of hydrogen fuel to long-range subsonic transport aircraft. Volume 1: Summary

NASA Technical Reports Server (NTRS)

Brewer, G. D.; Morris, R. E.; Lange, R. H.; Moore, J. W.

1975-01-01

The feasibility of using liquid hydrogen as fuel in advanced designs of long range, subsonic transport aircraft is assessed. Both passenger and cargo type aircraft are investigated. Comparisons of physical, performance, and economic parameters of the LH2 fueled designs with conventionally fueled aircraft are presented. Design studies are conducted to determine appropriate characteristics for the hydrogen related systems required on board the aircraft. These studies included consideration of material, structural, and thermodynamic requirements of the cryogenic fuel tanks and fuel systems with the structural support and thermal protection systems.

Validity of a combined fibromyalgia (FM) questionnaires to asses physical activity levels in Spanish elderly women: an experimental approach.

PubMed

Cancela, José María; Varela, Silvia; Alvarez, María José; Molina, Antonio; Ayán, Carlos; Martín, Vicente

2011-01-01

Questionnaires designed to assess the level of physical activity among elderly Spanish speaking women usually have problems of reproducibility and are difficult to administer. This study aims to validate a Spanish combined version of two questionnaires originally designed to assess physical activity levels in fibromyalgia women. The leisure time physical activity instrument (LTPAI) and the physical activity at home and work instrument (PAHWI). Both questionnaires were translated to Spanish using translation/back translation methodology, and then were administered to 44 women aged 60-80 twice, with an interval of 2 weeks. During the first administration, participants answered the Yale physical activity questionnaires (YPAS) and performed the 6-min walking test (6MWT). Although the Spanish version of the LTPAI and the PAWHI showed poor test-retest reliability and poor construct validity, the sum of the two questionnaires showed much better associations. The results suggest that the Spanish combined version of LTPAI and PAHWI would seem to be useful tools for assessing the level of physical activity among elderly Spanish speaking women. Nevertheless, such considerations as the cultural adaptation of their content or the link between the intensity of physical activity as perceived and that actually done must be adjusted for greater efficiency. Copyright © 2010 Elsevier Ireland Ltd. All rights reserved.

Consideration of Learning Orientations as an Application of Achievement Goals in Evaluating Life Science Majors in Introductory Physics

ERIC Educational Resources Information Center

Mason, Andrew J.; Bertram, Charles A.

2018-01-01

When considering performing an Introductory Physics for Life Sciences course transformation for one's own institution, life science majors' achievement goals are a necessary consideration to ensure the pedagogical transformation will be effective. However, achievement goals are rarely an explicit consideration in physics education research topics…

Development of a wearable plantar force measurement device for gait analysis in remote conditions.

PubMed

Hamid, Rawnak; Wijesundara, Suharshani; McMillan, Lachlan; Scott, David; Redoute, Jean-Michel; Ebeling, Peter R; Yuce, Mehmet Rasit

2017-07-01

The pressure field that exists between the foot and the supporting surface is identified as the foot plantar pressure. The information obtained from foot plantar pressure measurements has useful applications that include diagnosis of gait disturbances, optimization of footwear design, sport biomechanics and prevention of injury. Using wearable technology to measure foot plantar pressure continuously allows the collection of comprehensive real-life data sets while interfering minimally with the subject's daily activities. This paper presents the design of a wearable device to measure foot plantar pressure. Mechanical and electrical design considerations as well as data analysis are discussed. A pilot study involving 20 physically fit volunteers (15 males and 5 females, ageing from 20 - 45) performing a variety of physical activities (such as standing, walking, jumping and climbing up and down stairs) illustrate the potential of the device in terms of its wearability, and suitability for unobtrusive long-term monitoring.

Designing Modern Dance Classes for the Mature Mover: Physiological and Psychological Considerations

ERIC Educational Resources Information Center

Brodie, Julie A.; Lobel, Elin E.

2016-01-01

Dancers are continuing to dance longer due to changes in technique and increased awareness of the body and safe movement practices. Even after performing careers have ended, it is healthy both physically and emotionally for dancers to continue to take technique class, particularly if they are teaching dance classes. It can be a challenge, however,…

UTDallas Offline Computing System for B Physics with the Babar Experiment at SLAC

NASA Astrophysics Data System (ADS)

Benninger, Tracy L.

1998-10-01

The University of Texas at Dallas High Energy Physics group is building a high performance, large storage computing system for B physics research with the BaBar experiment (``factory'') at the Stanford Linear Accelerator Center. The goal of this system is to analyze one terabyte of complex Event Store data from BaBar in one to two days. The foundation of the computing system is a Sun E6000 Enterprise multiprocessor system, with additions of a Sun StorEdge L1800 Tape Library, a Sun Workstation for processing batch jobs, staging disks and interface cards. The design considerations, current status, projects underway, and possible upgrade paths will be discussed.

Performance of GeantV EM Physics Models

NASA Astrophysics Data System (ADS)

Amadio, G.; Ananya, A.; Apostolakis, J.; Aurora, A.; Bandieramonte, M.; Bhattacharyya, A.; Bianchini, C.; Brun, R.; Canal, P.; Carminati, F.; Cosmo, G.; Duhem, L.; Elvira, D.; Folger, G.; Gheata, A.; Gheata, M.; Goulas, I.; Iope, R.; Jun, S. Y.; Lima, G.; Mohanty, A.; Nikitina, T.; Novak, M.; Pokorski, W.; Ribon, A.; Seghal, R.; Shadura, O.; Vallecorsa, S.; Wenzel, S.; Zhang, Y.

2017-10-01

The recent progress in parallel hardware architectures with deeper vector pipelines or many-cores technologies brings opportunities for HEP experiments to take advantage of SIMD and SIMT computing models. Launched in 2013, the GeantV project studies performance gains in propagating multiple particles in parallel, improving instruction throughput and data locality in HEP event simulation on modern parallel hardware architecture. Due to the complexity of geometry description and physics algorithms of a typical HEP application, performance analysis is indispensable in identifying factors limiting parallel execution. In this report, we will present design considerations and preliminary computing performance of GeantV physics models on coprocessors (Intel Xeon Phi and NVidia GPUs) as well as on mainstream CPUs.

Physics and the production of antibiotics

NASA Astrophysics Data System (ADS)

Fairbrother, Robert; Riddle, Wendy; Fairbrother, Neil

2006-01-01

This article is the first in a series that describe some of the physics involved in the production of antibiotics. The field is often referred to as biochemical engineering but this does not indicate the considerable part played by physics and physicists. It is a process that undergoes continual research and development. Penicillin has been selected for the focus of this article, although the engineering principles and underlying physics apply to the production of other microbial products such as amino acids (which can be used as food additives), bulk chemicals such as ethanol (used in everything from hair spray and aftershave to solvents for paints and explosives) and the well-known processes of brewing and baking. In this article the application of physics to the design of the fermenter—the giant vessel in which the production of these products occurs—is discussed.

Class notes from the first international training course on the physical protection of nuclear facilities and materials

DOE Office of Scientific and Technical Information (OSTI.GOV)

Herrington, P.B.

1979-05-01

The International Training Course on Physical Protection of Nuclear Facilities and Materials was intended for representatives from the developing countries who are responsible for preparing regulations and designing and assessing physical protection systems. The first part of the course consists of lectures on the objectives, organizational characteristics, and licensing and regulations requirements of a state system of physical protection. Since the participants may have little experience in nuclear energy, background information is provided on the topics of nuclear materials, radiation hazards, reactor systems, and reactor operations. Transportation of nuclear materials is addressed and emphasis is placed on regulations. Included inmore » these discussions are presentations by guest speakers from countries outside the United States of America who present their countries' threat to nuclear facilities. Effectiveness evaluation methodology is introduced to the participants by means of instructions which teach them how to use logic trees and the EASI (Estimate of Adversary Sequence Interruption) program. The following elements of a physical protection system are discussed: barriers, protective force, intrusion detection systems, communications, and entry-control systems. Total systems concepts of physical protection system design are emphasized throughout the course. Costs, manpower/technology trade-offs, and other practical considerations are discussed. Approximately one-third of the course is devoted to practical exercises during which the attendees participatein problem solving. A hypothetical nuclear facility is introduced, and the attendees participate in the conceptual design of a physical protection system for the facility.« less

Parental-reported health anxiety symptoms in 5- to 7-year-old children: the Copenhagen Child Cohort CCC 2000.

PubMed

Rask, Charlotte Ulrikka; Elberling, Hanne; Skovgaard, Anne Mette; Thomsen, Per Hove; Fink, Per

2012-01-01

Hypochondriasis, now often designated as health anxiety, is important in terms of prevalence, levels of suffering, and health services cost in adults. Whereas the DSM-IV-TR suggests that the condition primarily begins in adulthood, retrospective reports point to a possible origin in childhood with onset as early as preschool age. However, little research has addressed health anxiety in children. In the present study we explored parental-reported health anxiety symptoms (HAS) and their association with physical and mental health in a population-based sample of 5- to 7-year-old children. Parents of 1323 children (49.7% boys), recruited from the birth cohort: Copenhagen Child Cohort CCC 2000, completed questionnaires regarding their child's HAS, and physical and mental health. Associations were examined using multiple logistic regression analyses adjusted for concurrent chronic physical disease. HAS were present in 17.6% and present 'a lot' (categorized as considerable HAS) in 2.4% of the children. Children with considerable HAS demonstrated more physical health problems and internalizing disorders than children with no or non-considerable HAS, but in the majority (71.9%) no associated chronic physical disease or other mental disorder was reported. In a subsample of children with functional somatic symptoms (FSS), impairing FSS were more likely among children who reported HAS. The findings suggest that HAS present as primary complaints early in life and are associated with impairing child health problems in the area of FSS and internalizing disorders. These aspects may be important to understand and also to prevent the development of severe health anxiety. Copyright © 2012 The Academy of Psychosomatic Medicine. Published by Elsevier Inc. All rights reserved.

Photonic Design: From Fundamental Solar Cell Physics to Computational Inverse Design

NASA Astrophysics Data System (ADS)

Miller, Owen Dennis

Photonic innovation is becoming ever more important in the modern world. Optical systems are dominating shorter and shorter communications distances, LED's are rapidly emerging for a variety of applications, and solar cells show potential to be a mainstream technology in the energy space. The need for novel, energy-efficient photonic and optoelectronic devices will only increase. This work unites fundamental physics and a novel computational inverse design approach towards such innovation. The first half of the dissertation is devoted to the physics of high-efficiency solar cells. As solar cells approach fundamental efficiency limits, their internal physics transforms. Photonic considerations, instead of electronic ones, are the key to reaching the highest voltages and efficiencies. Proper photon management led to Alta Device's recent dramatic increase of the solar cell efficiency record to 28.3%. Moreover, approaching the Shockley-Queisser limit for any solar cell technology will require light extraction to become a part of all future designs. The second half of the dissertation introduces inverse design as a new computational paradigm in photonics. An assortment of techniques (FDTD, FEM, etc.) have enabled quick and accurate simulation of the "forward problem" of finding fields for a given geometry. However, scientists and engineers are typically more interested in the inverse problem: for a desired functionality, what geometry is needed? Answering this question breaks from the emphasis on the forward problem and forges a new path in computational photonics. The framework of shape calculus enables one to quickly find superior, non-intuitive designs. Novel designs for optical cloaking and sub-wavelength solar cell applications are presented.

Review: Semiconductor Piezoresistance for Microsystems.

PubMed

Barlian, A Alvin; Park, Woo-Tae; Mallon, Joseph R; Rastegar, Ali J; Pruitt, Beth L

2009-01-01

Piezoresistive sensors are among the earliest micromachined silicon devices. The need for smaller, less expensive, higher performance sensors helped drive early micromachining technology, a precursor to microsystems or microelectromechanical systems (MEMS). The effect of stress on doped silicon and germanium has been known since the work of Smith at Bell Laboratories in 1954. Since then, researchers have extensively reported on microscale, piezoresistive strain gauges, pressure sensors, accelerometers, and cantilever force/displacement sensors, including many commercially successful devices. In this paper, we review the history of piezoresistance, its physics and related fabrication techniques. We also discuss electrical noise in piezoresistors, device examples and design considerations, and alternative materials. This paper provides a comprehensive overview of integrated piezoresistor technology with an introduction to the physics of piezoresistivity, process and material selection and design guidance useful to researchers and device engineers.

Theoretical studies on the mechanical behavior of granular materials under very low intergranular stresses

NASA Technical Reports Server (NTRS)

French, Kenneth W., Jr.

1986-01-01

The salient aspects of the theoretical modeling of a conventional triaxial test (CTC) of a cohesionless granular medium with stress and strain rate loading are described. Included are a controllable gravitational body force and provision for low confining pressure and/or very low intergranular stress. The modeling includes rational, analytic, and numerical phases, all in various stages of development. The numerical evolutions of theoretical models will be used in final design stages and in the analysis of the experimental data. In this the experimental design stage, it is of special interest to include in the candidate considerations every anomaly found in preliminary terrestrial experimentation. Most of the anomalies will be eliminated by design or enhanced for measurement as the project progresses. The main aspect of design being not the physical apparatus but the type and trajectories of loading elected. The major considerations that have been treated are: appearance and growth of local surface aberrations, stress-power coefficients, strain types, optical strain, radial bead migration, and measures of rotation for the proper stress flux.

The Vega balloons - A tool for studying atmosphere dynamics on Venus

NASA Technical Reports Server (NTRS)

Kremnev, R. S.; Selivanov, A. S.; Linkin, V. M.; Lipatov, A. N.; Tarnoruder, I. IA.; Puchkov, V. I.; Kustodiev, V. D.; Shurupov, A. A.; Ragent, B.; Preston, R. A.

1986-01-01

The Vega balloon experiment, designed to measure the dynamics of the Venus atmosphere, comprised the balloons themselves, their gondolas with on-board sensors and radio transmitters, and the radio telescope network on the earth. The structures and the physical parameters of the balloon probe are described, together with the instruments on the gondola, designed for the measurements of the atmospheric pressure, temperature, and vertical wind flows, and illumination, as well as possible flashes of lightning. Consideration is also given to the formatting of the information flow for the individual parameters measured.

Topics in LIFE Target Survival: 11-SI-004 Final Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Miles, Robin; Benett, Bill; Bond, Tiziana

The LIFE target design incorporates many considerations to generate the desired fusion gain including the physics design, the cost of manufacturing of the target, the injectability of the target, the aerodynamic flight characteristics of the target, the ability to track and engage the target and to maintain the structural and thermal integrity of the target. This document describes the effort that was made in support of issues of survivability of the target during injection which included issues massmanufactural materials and processes which could be used in the target.

Some process control/design considerations in the development of a microgravity mammalian cell bioreactor

NASA Technical Reports Server (NTRS)

Goochee, Charles F.

1987-01-01

The purpose is to review some of the physical/metabolic factors which must be considered in the development of an operating strategy for a mammalian cell bioreactor. Emphasis is placed on the dissolved oxygen and carbon dioxide requirements of growing mammalian epithelial cells. Literature reviews concerning oxygen and carbon dioxide requirements are discussed. A preliminary, dynamic model which encompasses the current features of the NASA bioreactor is presented. The implications of the literature survey and modeling effort on the design and operation of the NASA bioreactor are discussed.

Alternate fusion fuels workshop

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1981-06-01

The workshop was organized to focus on a specific confinement scheme: the tokamak. The workshop was divided into two parts: systems and physics. The topics discussed in the systems session were narrowly focused on systems and engineering considerations in the tokamak geometry. The workshop participants reviewed the status of system studies, trade-offs between d-t and d-d based reactors and engineering problems associated with the design of a high-temperature, high-field reactor utilizing advanced fuels. In the physics session issues were discussed dealing with high-beta stability, synchrotron losses and transport in alternate fuel systems. The agenda for the workshop is attached.

Transcranial magnetic stimulation: physics, electrophysiology, and applications.

PubMed

Fatemi-Ardekani, Ali

2008-01-01

Transcranial magnetic stimulation (TMS) is a noninvasive technique used to stimulate the brain. This review will examine the fundamental principles of physics upon which magnetic stimulation is based, the design considerations of the TMS device, and hypotheses about its electrophysiological effects resulting in neuromodulation. TMS is valuable in neurophysiology research and has significant therapeutic potential in clinical neurology and psychiatry. While TMS can modify neuronal currents in the brain, its underlying mechanism remains unknown. Salient applications are included and some suggestions are outlined for future development of magnetic stimulators that could lead to more effective neuronal stimulation and therefore better therapeutic and diagnostic applications.

Proposal for an Experiment to Measure Mixing, CP Violation and Rare Decays in Charm and Beauty Particle Decays at the Fermilab Collider - BTeV

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kulyavtsev, A.; Procario, M.; Russ, J.

2000-05-01

This proposal consists of five parts and two appendices. The first part provides a detailed physics justification for the BTe V experiment. The second part presents the considerations that drive the detector design, followed by a description of the detector itself. The third part summarizes our simulation results which demonstrate that the design does enable us to achieve our physics goals. The fourth part compares BTeV's physics reach to that of other experiments which will be active in B physics in the same time period. The fifth part gives a very brief, high level summary of the cost estimate formore » BTeV. Appendix A has additional technical details about many of the detector subsystems and R&D plans; it is intended to be read primarily by experts in each area. Appendix B contains a roadmap which describes the location in the proposal of the answers to questions posed to the BTeV collaboration by the Fermilab Program Advisory Committee in June of 1999.« less

Physical Aspects of Light--"Seeing Parameters". Lighting Techniques in Architecture (Madison, December 9-10, 1969).

ERIC Educational Resources Information Center

Turek, Robert W.

In order to judge or design the lighting of an interior a person must be able to understand and take into account many aspects of seeing and illumination. Important areas of consideration are--(1) factors that contribute to the visibility of an object: size, brightness, contrast, and time, (2) radiant energy with regard to the visible spectrums of…

Photon-limited Sensing and Surveillance

DTIC Science & Technology

2015-01-29

considerable time delay). More specifically, there were four main outcomes from this work: • Improved understanding of the fundmental limitations of...that we design novel cameras for photon-limited settings based on the principles of CS. Most prior theoretical results in compressed sensing and related...inverse problems apply to idealized settings where the noise is i.i.d., and do not account for signal-dependent noise and physical sensing

Technical Assessment: Autonomy

DTIC Science & Technology

2015-02-01

and video games . If DoD develops CONOPS for lower- performance systems, there is an opportunity to leverage a large amount of private investment, as the...originally designed for the Xbox video game platform, it is now being used or developed for retail environments, operating rooms, and physical therapy...approaches that render artificial intelligence less susceptible to intelligent influence. One area worthy of consideration is applied game theory, which

Design considerations for the beam-waveguide retrofit of a ground antenna station

NASA Technical Reports Server (NTRS)

Veruttipong, T.; Withington, J.; Galindo-Israel, V.; Imbriale, W.; Bathker, D.

1986-01-01

Retrofitting an antenna that was originally designed without a beam waveguide introduces special difficulties because it is desirable to minimize alteration of the original mechanical truss work and to image the actual feed without distortion at the focal point of the dual-shaped reflector. To obtain an acceptable image, certain Geometrical Optics (GO) design criteria are followed as closely as possible. The problems associated with applying these design criteria to a 34-meter dual-shaped DSN (Deep Space Network) antenna are discussed. The use of various diffraction analysis techniques in the design process is also discussed. GTD and FFT algorithms are particularly necessary at the higher frequencies, while Physical Optics and Spherical Wave Expansions proved necessary at the lower frequencies.

Lubricant effects on bearing life

NASA Technical Reports Server (NTRS)

Zaretsky, Erwin V.

1986-01-01

Lubricant considerations for rolling-element bearings have within the last two decades taken on added importance in the design and operation of mechanical systems. The phenomenon which limits the useful life of bearings is rolling-element or surface pitting fatigue. The elastohydrodynamic (EHD) film thickness which separates the ball or roller surface from those of the raceways of the bearing directly affects bearing life. Chemical additives added to the lubricant can also significantly affect bearings life and reliability. The interaction of these physical and chemical effects is important to the design engineer and user of these systems. Design methods and lubricant selection for rolling-element bearings are presented and discussed.

Multifrequency synthetic aperture radar antenna comparison study. [for remote sensing

NASA Technical Reports Server (NTRS)

Blevins, B. A.

1983-01-01

Three multifrequency, dual polarization SAR antenna designs are reviewed. The SAR antenna design specifications were for a "straw man' SAR which would approximate the requirements for projected shuttle-based SAR's. Therefore, the physical dimensions were constrained to be compatible with the space shuttle. The electrical specifications were similar to those of SIR-A and SIR-B with the addition of dual polarization and the addition of C and X band operation. Early in the antenna design considerations, three candidate technologies emerged as having promise. They were: (1) microstrip patch planar array antennas, (2) slotted waveguide planar array antennas, and (3) open-ended waveguide planar array antennas.

Material Control and Accounting Design Considerations for High-Temperature Gas Reactors

DOE Office of Scientific and Technical Information (OSTI.GOV)

Trond Bjornard; John Hockert

The subject of this report is domestic safeguards and security by design (2SBD) for high-temperature gas reactors, focusing on material control and accountability (MC&A). The motivation for the report is to provide 2SBD support to the Next Generation Nuclear Plant (NGNP) project, which was launched by Congress in 2005. This introductory section will provide some background on the NGNP project and an overview of the 2SBD concept. The remaining chapters focus specifically on design aspects of the candidate high-temperature gas reactors (HTGRs) relevant to MC&A, Nuclear Regulatory Commission (NRC) requirements, and proposed MC&A approaches for the two major HTGR reactormore » types: pebble bed and prismatic. Of the prismatic type, two candidates are under consideration: (1) GA's GT-MHR (Gas Turbine-Modular Helium Reactor), and (2) the Modular High-Temperature Reactor (M-HTR), a derivative of Areva's Antares reactor. The future of the pebble-bed modular reactor (PBMR) for NGNP is uncertain, as the PBMR consortium partners (Westinghouse, PBMR [Pty] and The Shaw Group) were unable to agree on the path forward for NGNP during 2010. However, during the technology assessment of the conceptual design phase (Phase 1) of the NGNP project, AREVA provided design information and technology assessment of their pebble bed fueled plant design called the HTR-Module concept. AREVA does not intend to pursue this design for NGNP, preferring instead a modular reactor based on the prismatic Antares concept. Since MC&A relevant design information is available for both pebble concepts, the pebble-bed HTGRs considered in this report are: (1) Westinghouse PBMR; and (2) AREVA HTR-Module. The DOE Office of Nuclear Energy (DOE-NE) sponsors the Fuel Cycle Research and Development program (FCR&D), which contains an element specifically focused on the domestic (or state) aspects of SBD. This Material Protection, Control and Accountancy Technology (MPACT) program supports the present work summarized in this report, namely the development of guidance to support the consideration of MC&A in the design of both pebble-bed and prismatic-fueled HTGRs. The objective is to identify and incorporate design features into the facility design that will cost effectively aid in making MC&A more effective and efficient, with minimum impact on operations. The theft of nuclear material is addressed through both MC&A and physical protection, while the threat of sabotage is addressed principally through physical protection.« less

Recommendations for the use of notebooks in upper-division physics lab courses

NASA Astrophysics Data System (ADS)

Stanley, Jacob T.; Lewandowski, H. J.

2018-01-01

The use of lab notebooks for scientific documentation is a ubiquitous part of physics research. However, it is common for undergraduate physics laboratory courses not to emphasize the development of documentation skills, despite the fact that such courses are some of the earliest opportunities for students to start engaging in this practice. One potential impediment to the inclusion of explicit documentation training is that it may be unclear to instructors which features of authentic documentation practice are efficacious to teach and how to incorporate these features into the lab class environment. In this work, we outline some of the salient features of authentic documentation, informed by interviews with physics researchers, and provide recommendations for how these can be incorporated into the lab curriculum. We do not focus on structural details or templates for notebooks. Instead, we address holistic considerations for the purpose of scientific documentation that can guide students to develop their own documentation style. While taking into consideration all the aspects that can help improve students' documentation, it is also important to consider the design of the lab activities themselves. Students should have experience with implementing these authentic features of documentation during lab activities in order for them to find practice with documentation beneficial.

Community Agency Survey Formative Research Results From the TAAG Study

PubMed Central

Saunders, Ruth P.; Moody, Jamie

2008-01-01

School and community agency collaboration can potentially increase physical activity opportunities for youth. Few studies have examined the role of community agencies in promoting physical activity, much less in collaboration with schools. This article describes formative research data collection from community agencies to inform the development of the Trial of Activity for Adolescent Girls (TAAG) intervention to provide out-of-school physical activity programs for girls. The community agency survey is designed to assess agency capacity to provide physical activity programs for girls, including resources, programs, and partnerships. Most agency respondents (n = 138) report operations during after-school hours, adequate facilities, and program options for girls, although most are sport oriented. Agency resources and programming vary considerably across the six TAAG field sites. Many agencies report partnerships, some involving schools, although not necessarily related to physical activity. Implications for the TAAG intervention are presented. PMID:16397156

The Effects of Constraints and Mastery on Mental and Physical Health: Conceptual and Methodological Considerations

PubMed Central

Infurna, Frank J.; Mayer, Axel

2015-01-01

Perceived control and health are closely interrelated in adulthood and old age. However, less is known regarding the differential implications of two facets of perceived control, constraints and mastery, for mental and physical health. Furthermore, a limitation of previous research testing the pathways linking perceived control to mental and physical health is that mediation was tested with cross-sectional designs and not in a longitudinal mediation design that accounts for temporal ordering and prior confounds. Using data from the Health and Retirement Study (HRS; n = 7,612, M age = 68, SD = 10.66; 59% women) we examined the effect of constraints and mastery on 4-year changes in mental and physical health and whether physical activity mediated such effects in a longitudinal mediation design. Using confirmatory factor analysis, we modeled the two-factor structure of perceived control that consisted of constraints and mastery. In our longitudinal mediation model, where we accounted for possible confounders (e.g., age, gender, education, neuroticism, conscientiousness, memory, and health conditions), constraints showed a stronger total effect on mental and physical health, than mastery, such that more constraints were associated with 4-year declines in mental and physical health. Physical activity did not mediate the effect of constraints and mastery on mental and physical health (indirect effect). In order to demonstrate the importance of a longitudinal mediation model that accounts for confounders, we also estimated the mediated effect using two models commonly used in the literature: cross-sectional mediation model and longitudinal mediation model without accounting for confounders. These mediation models indicated a spurious indirect effect that cannot be causally interpreted. Our results showcase that constraints and mastery have differential implications for mental and physical health, as well as how a longitudinal mediation design can illustrate (or not) pathways in developmental processes. Our discussion focuses on the conceptual and methodological implications of a two facet model of perceived control and the strengths of longitudinal mediation designs for testing conceptual models of human development. PMID:25938243

The effects of constraints and mastery on mental and physical health: Conceptual and methodological considerations.

PubMed

Infurna, Frank J; Mayer, Axel

2015-06-01

Perceived control and health are closely interrelated in adulthood and old age. However, less is known regarding the differential implications of 2 facets of perceived control, constraints and mastery, for mental and physical health. Furthermore, a limitation of previous research testing the pathways linking perceived control to mental and physical health is that mediation was tested with cross-sectional designs and not in a longitudinal mediation design that accounts for temporal ordering and prior confounds. Using data from the Health and Retirement Study (HRS; n = 7,612, M age = 68, SD = 10.66; 59% women) we examined the effect of constraints and mastery on 4-year changes in mental and physical health and whether physical activity mediated such effects in a longitudinal mediation design. Using confirmatory factor analysis, we modeled the 2-factor structure of perceived control that consisted of constraints and mastery. In our longitudinal mediation model, where we accounted for possible confounders (e.g., age, gender, education, neuroticism, conscientiousness, memory, and health conditions), constraints showed a stronger total effect on mental and physical health, than mastery, such that more constraints were associated with 4-year declines in mental and physical health. Physical activity did not mediate the effect of constraints and mastery on mental and physical health (indirect effect). To demonstrate the importance of a longitudinal mediation model that accounts for confounders, we also estimated the mediated effect using 2 models commonly used in the literature: cross-sectional mediation model and longitudinal mediation model without accounting for confounders. These mediation models indicated a spurious indirect effect that cannot be causally interpreted. Our results showcase that constraints and mastery have differential implications for mental and physical health, as well as how a longitudinal mediation design can illustrate (or not) pathways in developmental processes. Our discussion focuses on the conceptual and methodological implications of a 2 facet model of perceived control and the strengths of longitudinal mediation designs for testing conceptual models of human development. (c) 2015 APA, all rights reserved.

Expert reasoning within an object-oriented framework

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bohn, S.J.; Pennock, K.A.

1991-10-01

A large number of contaminated waste sites across the United States await site remediation efforts. These sites can be physically complex, composed of multiple, possibly interacting, contaminants distributed throughout one or more media. The Remedial Action Assessment System (RAAS) is being designed and developed to support decisions concerning the selection of remediation alternatives. The goal of this system is to broaden the consideration of remediation alternatives, while reducing the time and cost of making these considerations. The Remedial Action Assessment System was designed and constructed using object-oriented techniques. It is a hybrid system which uses a combination of quantitative andmore » qualitative reasoning to consider and suggest remediation alternatives. the reasoning process that drives this application is centered around an object-oriented organization of remediation technology information. This paper briefly describes the waste remediation problem and then discusses the information structure and organization RAAS utilizes to address it. 4 refs., 4 figs.« less

The impact of student diversity on interest, design, and promotion of Web-based tailored nutrition and physical activity programs for community colleges.

PubMed

Quintiliani, Lisa M; De Jesus, Maria; Wallington, Sherrie Flynt

2011-01-01

To examine an organizational level perspective of the process of adopting Web-based tailored nutrition and physical activity programs for community college students. In this qualitative study, 21 individual key informant interviews of community college student services and health center administrators were used to examine organizational-level perceptions of interest in, design characteristics of, and ways to promote health programs. A cross-classification matrix of a priori and emergent themes related to student diversity was created to describe cross-cutting patterns. Findings revealed 5 emergent themes for consideration in program development related to student diversity: (1) multiple roles played by students, (2) limited access to financial resources, (3) varied student demographics, (4) different levels of understanding, and (5) commuting to campus. Nutrition and physical activity programs for community colleges need to specifically address the diverse nature of their students to increase the potential of adoption. Copyright © 2011 Society for Nutrition Education. Published by Elsevier Inc. All rights reserved.

One-dimensional collision carts computer model and its design ideas for productive experiential learning

NASA Astrophysics Data System (ADS)

Wee, Loo Kang

2012-05-01

We develop an Easy Java Simulation (EJS) model for students to experience the physics of idealized one-dimensional collision carts. The physics model is described and simulated by both continuous dynamics and discrete transition during collision. In designing the simulations, we discuss briefly three pedagogical considerations namely (1) a consistent simulation world view with a pen and paper representation, (2) a data table, scientific graphs and symbolic mathematical representations for ease of data collection and multiple representational visualizations and (3) a game for simple concept testing that can further support learning. We also suggest using a physical world setup augmented by simulation by highlighting three advantages of real collision carts equipment such as a tacit 3D experience, random errors in measurement and the conceptual significance of conservation of momentum applied to just before and after collision. General feedback from the students has been relatively positive, and we hope teachers will find the simulation useful in their own classes.

Designing Adaptive Low-Dissipative High Order Schemes for Long-Time Integrations. Chapter 1

NASA Technical Reports Server (NTRS)

Yee, Helen C.; Sjoegreen, B.; Mansour, Nagi N. (Technical Monitor)

2001-01-01

A general framework for the design of adaptive low-dissipative high order schemes is presented. It encompasses a rather complete treatment of the numerical approach based on four integrated design criteria: (1) For stability considerations, condition the governing equations before the application of the appropriate numerical scheme whenever it is possible; (2) For consistency, compatible schemes that possess stability properties, including physical and numerical boundary condition treatments, similar to those of the discrete analogue of the continuum are preferred; (3) For the minimization of numerical dissipation contamination, efficient and adaptive numerical dissipation control to further improve nonlinear stability and accuracy should be used; and (4) For practical considerations, the numerical approach should be efficient and applicable to general geometries, and an efficient and reliable dynamic grid adaptation should be used if necessary. These design criteria are, in general, very useful to a wide spectrum of flow simulations. However, the demand on the overall numerical approach for nonlinear stability and accuracy is much more stringent for long-time integration of complex multiscale viscous shock/shear/turbulence/acoustics interactions and numerical combustion. Robust classical numerical methods for less complex flow physics are not suitable or practical for such applications. The present approach is designed expressly to address such flow problems, especially unsteady flows. The minimization of employing very fine grids to overcome the production of spurious numerical solutions and/or instability due to under-resolved grids is also sought. The incremental studies to illustrate the performance of the approach are summarized. Extensive testing and full implementation of the approach is forthcoming. The results shown so far are very encouraging.

Madres para la Salud: Design of a Theory-based Intervention for Postpartum Latinas

PubMed Central

Keller, Colleen; Records, Kathie; Ainsworth, Barbara; Belyea, Michael; Permana, Paska; Coonrod, Dean; Vega-López, Sonia; Nagle-Williams, Allison

2011-01-01

Background Weight gain in young women suggests that childbearing may be an important contributor to the development of obesity in women. Depressive symptoms can interfere with resumption of normal activity levels following childbirth or with the initiation of or adherence to physical activity programs essential for losing pregnancy weight. Depression symptoms may function directly to promote weight gain through a physiologic mechanism. Obesity and its related insulin resistance may contribute to depressed mood physiologically. Although physical activity has well-established beneficial effects on weight management and depression, women tend to under participate in physical activity during childbearing years. Further, the mechanisms underpinning the interplay of overweight, obesity, physical activity, depression, and inflammatory processes are not clearly explained. Objectives This report describes the theoretical rationale, design considerations, and cultural relevance for “Madres para la Salud” [Mothers for Health]. Design and Methods Madres para la Salud is a 12 month prospective, randomized controlled trial exploring the effectiveness of a culturally specific intervention using “bouts” of physical activity to effect changes in body fat, systemic and fat tissue inflammation, and postpartum depression symptoms in sedentary postpartum Latinas. Summary The significance and innovation of Madres para la Salud includes use of a theory-driven approach to intervention, specification and cultural relevance of a social support intervention, use of a Promotora model to incorporate cultural approaches, use of objective measures of physical activity in post partum Latinas women, and the examination of biomarkers indicative of cardiovascular risk related to physical activity behaviors in postpartum Latinas. PMID:21238614

Review: Semiconductor Piezoresistance for Microsystems

PubMed Central

Barlian, A. Alvin; Park, Woo-Tae; Mallon, Joseph R.; Rastegar, Ali J.; Pruitt, Beth L.

2010-01-01

Piezoresistive sensors are among the earliest micromachined silicon devices. The need for smaller, less expensive, higher performance sensors helped drive early micromachining technology, a precursor to microsystems or microelectromechanical systems (MEMS). The effect of stress on doped silicon and germanium has been known since the work of Smith at Bell Laboratories in 1954. Since then, researchers have extensively reported on microscale, piezoresistive strain gauges, pressure sensors, accelerometers, and cantilever force/displacement sensors, including many commercially successful devices. In this paper, we review the history of piezoresistance, its physics and related fabrication techniques. We also discuss electrical noise in piezoresistors, device examples and design considerations, and alternative materials. This paper provides a comprehensive overview of integrated piezoresistor technology with an introduction to the physics of piezoresistivity, process and material selection and design guidance useful to researchers and device engineers. PMID:20198118

Design, randomization and methodology of the TriAtiva Program to reduce obesity in school children in Southern Brazil.

PubMed

Friedrich, Roberta R; Caetano, Lisandrea C; Schiffner, Mariana D; Wagner, Mário B; Schuch, Ilaine

2015-04-11

The prevalence of child obesity in Brazil has increased rapidly in recent decades. There is, therefore, an urgent need to develop effective strategies to prevent and control child obesity. In light of these considerations, an intervention program with a focus on nutrition education and physical activity was developed for to prevent and control obesity in schools. The intervention was called the TriAtiva Program: Education, Nutrition and Physical Activity. This article describes the design, randomization and method used to evaluate the TriAtiva program. This randomized controlled cluster trial was performed in 12 municipal schools in the city of Porto Alegre/RS (six schools in the intervention group and six control schools) which offered first- through fourth grade, during one school year. The TriAtiva Program was implemented through educational activities related to healthy eating and physical activity, creating an environment which promoted student health while involving the school community and student families. The primary outcome of the present study was body mass, while its secondary outcomes were waist circumference, percent body fat, blood pressure and behavioural variables such as eating habits and physical activity levels, as well as the prevalence, incidence and remission rates of obesity. The intervention was developed based on a comprehensive review of controlled trials of similar design. The TriAtiva Program: Education, Nutrition and Physical Activity was the first study in Southern Brazil to use a randomized controlled design to evaluate an intervention involving both nutrition education and physical activity in schools. Our results will contribute to the development of future interventions aimed at preventing and controlling child obesity in schools, especially in Brazil. Brazilian Clinical Trials Registry (REBEC) number RBR2xx2z4.

Physics of Artificial Gravity

NASA Technical Reports Server (NTRS)

Bukley, Angie; Paloski, William; Clement, Gilles

2006-01-01

This chapter discusses potential technologies for achieving artificial gravity in a space vehicle. We begin with a series of definitions and a general description of the rotational dynamics behind the forces ultimately exerted on the human body during centrifugation, such as gravity level, gravity gradient, and Coriolis force. Human factors considerations and comfort limits associated with a rotating environment are then discussed. Finally, engineering options for designing space vehicles with artificial gravity are presented.

Development and Application of Low Energy X-Ray and Electron Physics.

DTIC Science & Technology

1984-03-14

the other with a specially designed streak camera. D. X-Ray Optics 1. Analyzers and Monochromators Along with our theoretical model calculations for...stearate and lead behenate (2d-spacings of 80, 100 and 120 A, respectively) that have reached the theoretically predicted values for peak, integrated...energy secondary electron energy photoemission, considerably more theoretical and ex- region. The secondary electron spectrum peaks at about perimental

Safeguards and Security by Design (SSBD) for Small Modular Reactors (SMRs) through a Common Global Approach

DOE Office of Scientific and Technical Information (OSTI.GOV)

Badwan, Faris M.; Demuth, Scott Francis; Miller, Michael Conrad

Small Modular Reactors (SMR) with power levels significantly less than the currently standard 1000 to 1600-MWe reactors have been proposed as a potential game changer for future nuclear power. SMRs may offer a simpler, more standardized, and safer modular design by using factory built and easily transportable components. Additionally, SMRs may be more easily built and operated in isolated locations, and may require smaller initial capital investment and shorter construction times. Because many SMRs designs are still conceptual and consequently not yet fixed, designers have a unique opportunity to incorporate updated design basis threats, emergency preparedness requirements, and then fullymore » integrate safety, physical security, and safeguards/material control and accounting (MC&A) designs. Integrating safety, physical security, and safeguards is often referred to as integrating the 3Ss, and early consideration of safeguards and security in the design is often referred to as safeguards and security by design (SSBD). This paper describes U.S./Russian collaborative efforts toward developing an internationally accepted common approach for implementing SSBD/3Ss for SMRs based upon domestic requirements, and international guidance and requirements. These collaborative efforts originated with the Nuclear Energy and Nuclear Security working group established under the U.S.-Russia Bilateral Presidential Commission during the 2009 Presidential Summit. Initial efforts have focused on review of U.S. and Russian domestic requirements for Security and MC&A, IAEA guidance for security and MC&A, and IAEA requirements for international safeguards. Additionally, example SMR design features that can enhance proliferation resistance and physical security have been collected from past work and reported here. The development of a U.S./Russian common approach for SSBD/3Ss should aid the designer of SMRs located anywhere in the world. More specifically, the application of this approach may lead to more proliferation resistant and physically secure design features for SMRs.« less

The dynamic and steady state behavior of a PEM fuel cell as an electric energy source

NASA Astrophysics Data System (ADS)

Costa, R. A.; Camacho, J. R.

The main objective of this work is to extract information on the internal behavior of three small polymer electrolyte membrane fuel cells under static and dynamic load conditions. A computational model was developed using Scilab [SCILAB 4, Scilab-a free scientific software package, http://www.scilab.org/, INRIA, France, December, 2005] to simulate the static and dynamic performance [J.M. Correa, A.F. Farret, L.N. Canha, An analysis of the dynamic performance of proton exchange membrane fuel cells using an electrochemical model, in: 27th Annual Conference of IEEE Industrial Electronics Society, 2001, pp. 141-146] of this particular type of fuel cell. This dynamic model is based on electrochemical equations and takes into consideration most of the chemical and physical characteristics of the device in order to generate electric power. The model takes into consideration the operating, design parameters and physical material properties. The results show the internal losses and concentration effects behavior, which are of interest for power engineers and researchers.

Statistical sensitivity analysis of a simple nuclear waste repository model

NASA Astrophysics Data System (ADS)

Ronen, Y.; Lucius, J. L.; Blow, E. M.

1980-06-01

A preliminary step in a comprehensive sensitivity analysis of the modeling of a nuclear waste repository. The purpose of the complete analysis is to determine which modeling parameters and physical data are most important in determining key design performance criteria and then to obtain the uncertainty in the design for safety considerations. The theory for a statistical screening design methodology is developed for later use in the overall program. The theory was applied to the test case of determining the relative importance of the sensitivity of near field temperature distribution in a single level salt repository to modeling parameters. The exact values of the sensitivities to these physical and modeling parameters were then obtained using direct methods of recalculation. The sensitivity coefficients found to be important for the sample problem were thermal loading, distance between the spent fuel canisters and their radius. Other important parameters were those related to salt properties at a point of interest in the repository.

Control design based on dead-zone and leakage adaptive laws for artificial swarm mechanical systems

NASA Astrophysics Data System (ADS)

Zhao, Xiaomin; Chen, Y. H.; Zhao, Han

2017-05-01

We consider the control design of artificial swarm systems with emphasis on four characteristics. First, the agent is made of mechanical components. As a result, the motion of each agent is subject to physical laws that govern mechanical systems. Second, both nonlinearity and uncertainty of the mechanical system are taken into consideration. Third, the ideal agent kinematic performance is treated as a desired d'Alembert constraint. This in turn suggests a creative way of embedding the constraint into the control design. Fourth, two types of adaptive robust control schemes are designed. They both contain leakage and dead-zone. However, one design suggests a trade-off between the amount of leakage and the size of dead-zone, in exchange for a simplified dead-zone structure.

A Walk in the Park: The Influence of Urban Parks and Community Violence on Physical Activity in Chelsea, MA.

PubMed

Ou, Judy Y; Levy, Jonathan I; Peters, Junenette L; Bongiovanni, Roseann; Garcia-Soto, Jovanna; Medina, Rafael; Scammell, Madeleine K

2016-01-04

Proximity to a park does not necessarily imply access or use, and the social environment may positively or negatively influence the positive intentions of the built environment. To investigate parks, park use and physical activity, and their associations with exposure to community violence, we interviewed residents (n = 354) of a densely populated urban community. Our findings indicate that proximity to any park is not associated with physical activity. However, proximity to the preferred park reported by residents to be conducive for physical activity (with walking paths, large fields, playgrounds for children and tennis courts) was associated with physical activity. Conversely, knowledge of sexual assault or rape in the neighborhood is inversely associated with every type of physical activity (park-based, outdoor, and indoor). Our findings suggest that improvements to the built environment (parks, green spaces) may be hindered by adverse social environments and both are necessary for consideration in the design of public health interventions.

Factors related to physical activity adherence in women: review and suggestions for future research.

PubMed

White, Jennifer L; Ransdell, Lynda B; Vener, Jamie; Flohr, Judith A

2005-01-01

Approximately 50 percent of individuals who start an exercise program withdraw within 6 months. Thus, many individuals withdraw before health benefits have been realized. This is a disconcerting statistic considering the well known benefits of physical activity for decreasing risk of hypokinetic diseases and improving quality of life. The literature has suggested a plethora of factors to increase the number of individuals who initiate a physical activity program. However, little is known about the factors that keep women exercising-otherwise known as exercise adherence. The purpose of this paper is to: (a) systematically review the quantitative literature to discern the major factors contributing to adherence to physical activity in women and men and make recommendations for specific gender-based considerations that are important when designing PA interventions for women, and (b) suggest areas of future research related to increasing adherence to physical activity in women. Key factors reviewed in this paper may be useful in developing efficacious physical activity programs for women.

A Walk in the Park: The Influence of Urban Parks and Community Violence on Physical Activity in Chelsea, MA

PubMed Central

Ou, Judy Y.; Levy, Jonathan I.; Peters, Junenette L.; Bongiovanni, Roseann; Garcia-Soto, Jovanna; Medina, Rafael; Scammell, Madeleine K.

2016-01-01

Proximity to a park does not necessarily imply access or use, and the social environment may positively or negatively influence the positive intentions of the built environment. To investigate parks, park use and physical activity, and their associations with exposure to community violence, we interviewed residents (n = 354) of a densely populated urban community. Our findings indicate that proximity to any park is not associated with physical activity. However, proximity to the preferred park reported by residents to be conducive for physical activity (with walking paths, large fields, playgrounds for children and tennis courts) was associated with physical activity. Conversely, knowledge of sexual assault or rape in the neighborhood is inversely associated with every type of physical activity (park-based, outdoor, and indoor). Our findings suggest that improvements to the built environment (parks, green spaces) may be hindered by adverse social environments and both are necessary for consideration in the design of public health interventions. PMID:26742051

Frequency choice of eRHIC SRF linac

DOE Office of Scientific and Technical Information (OSTI.GOV)

Xu, W.; Ben-Zvi, I.; Roser, T.

2016-01-05

eRHIC is a FFAG lattice-based multipass ERL. The eRHIC SRF linac has been decided to change from 422 MHz 5-cell cavity to 647 MHz 5-cell cavity. There are several considerations affecting the frequency choice for a high-current multipass-ERL: the beam structure, bunch length, energy spread, beam-break-up (BBU) threshold, SRF loss considerations. Beyond the physics considerations, cost and complexity or risk is an important consideration for the frequency choice, especially when we are designing a machine to be built in a few years. Although there are some benefits of using a 422 MHz cavity for eRHIC ERL, however, there are somemore » very critical drawbacks, including lack of facilities to fabricate a 422 MHz 5-cell cavity, very few facilities to process such a cavity and no existing facility to test the cavity anywhere. As the cavity size is big and its weight is large, it is difficult to handle it during fabrication, processing and testing, and no one has experience in this area. As the cavity size is large, the cryomodule becomes big as well. All of these considerations drive the risk of building eRHIC ERL with 422 MHz cavities to a very high level. Therefore, a decision was made to change the frequency of main linac to be 647 MHz 5-cell cavities. This note will compare these two linacs: 422MHz 5-cell cavity linac and 647Mz 5-cell cavity SRF linac, from both practical point of view and physics point of view.« less

Shielding analyses for repetitive high energy pulsed power accelerators

NASA Astrophysics Data System (ADS)

Jow, H. N.; Rao, D. V.

Sandia National Laboratories (SNL) designs, tests and operates a variety of accelerators that generate large amounts of high energy Bremsstrahlung radiation over an extended time. Typically, groups of similar accelerators are housed in a large building that is inaccessible to the general public. To facilitate independent operation of each accelerator, test cells are constructed around each accelerator to shield it from the radiation workers occupying surrounding test cells and work-areas. These test cells, about 9 ft. high, are constructed of high density concrete block walls that provide direct radiation shielding. Above the target areas (radiation sources), lead or steel plates are used to minimize skyshine radiation. Space, accessibility and cost considerations impose certain restrictions on the design of these test cells. SNL Health Physics division is tasked to evaluate the adequacy of each test cell design and compare resultant dose rates with the design criteria stated in DOE Order 5480.11. In response, SNL Health Physics has undertaken an intensive effort to assess existing radiation shielding codes and compare their predictions against measured dose rates. This paper provides a summary of the effort and its results.

Animation graphic interface for the space shuttle onboard computer

NASA Technical Reports Server (NTRS)

Wike, Jeffrey; Griffith, Paul

1989-01-01

Graphics interfaces designed to operate on space qualified hardware challenge software designers to display complex information under processing power and physical size constraints. Under contract to Johnson Space Center, MICROEXPERT Systems is currently constructing an intelligent interface for the LASER DOCKING SENSOR (LDS) flight experiment. Part of this interface is a graphic animation display for Rendezvous and Proximity Operations. The displays have been designed in consultation with Shuttle astronauts. The displays show multiple views of a satellite relative to the shuttle, coupled with numeric attitude information. The graphics are generated using position data received by the Shuttle Payload and General Support Computer (PGSC) from the Laser Docking Sensor. Some of the design considerations include crew member preferences in graphic data representation, single versus multiple window displays, mission tailoring of graphic displays, realistic 3D images versus generic icon representations of real objects, the physical relationship of the observers to the graphic display, how numeric or textual information should interface with graphic data, in what frame of reference objects should be portrayed, recognizing conditions of display information-overload, and screen format and placement consistency.

"It's fun, but …" Children with cerebral palsy and their experiences of participation in physical activities.

PubMed

Lauruschkus, Katarina; Nordmark, Eva; Hallström, Inger

2015-01-01

To explore the experiences of children with cerebral palsy (CP) regarding participation in physical activities, and to describe facilitators and barriers. Sixteen children with CP 8-11 years old who varied in gross motor, cognitive and communicative function participated in either an individual interview or a focus group. Two categories and 10 sub-categories emerged from the content analysis. The category "Being physically active, because …" describes facilitators for being physically active divided into the sub-categories "Enjoying the feeling", "Being capable", "Feeling of togetherness", "Being aware it is good for me", and "Using available opportunities". The second category "Being physically active, but …" describes barriers to being physically active, divided into the sub-categories "Getting tired and experiencing pain", "Something being wrong with my body", "Being dependent on others", "Not being good enough" and "Missing available opportunities". Asking children with CP about the physical activities they enjoy, and giving them the opportunity of trying self-selected activities with the right support is important for facilitating an increased participation in physical activities. Having fun with family and friends when being physically active, and enjoying the sensation of speed should be taken into consideration when designing interventions. When supporting children to become and remain physically active, attention should be paid to pain, fatigue and the accessibility of activities and locations. Implications for Rehabilitation Children want to be physically active together with friends or others. Children want to have fun and enjoy the sensation of speed when being physically active. Self-selected physical activities and the opportunity of trying new activities with the right support is essential for facilitating an increased participation in physical activities. Service planning and design may be facilitated by asking children about the physical activities they enjoy.

Carbon dioxide mineralization process design and evaluation: concepts, case studies, and considerations.

PubMed

Yuen, Yeo Tze; Sharratt, Paul N; Jie, Bu

2016-11-01

Numerous carbon dioxide mineralization (CM) processes have been proposed to overcome the slow rate of natural weathering of silicate minerals. Ten of these proposals are mentioned in this article. The proposals are described in terms of the four major areas relating to CM process design: pre-treatment, purification, carbonation, and reagent recycling operations. Any known specifics based on probable or representative operating and reaction conditions are listed, and basic analysis of the strengths and shortcomings associated with the individual process designs are given in this article. The processes typically employ physical or chemical pseudo-catalytic methods to enhance the rate of carbon dioxide mineralization; however, both methods have its own associated advantages and problems. To examine the feasibility of a CM process, three key aspects should be included in the evaluation criteria: energy use, operational considerations as well as product value and economics. Recommendations regarding the optimal level of emphasis and implementation of measures to control these aspects are given, and these will depend very much on the desired process objectives. Ultimately, a mix-and-match approach to process design might be required to provide viable and economic proposals for CM processes.

Methodological proceedings to evaluate the physical accessibility in urban historic sites.

PubMed

Ribeiro, Gabriela Sousa; Martins, Laura Bezerra; Monteiro, Circe Maria Gama

2012-01-01

Historic urban sites are set by cultural and social diversities, generating multiple activities and use and access to these sites should be available to all people including those with disabilities. Taking into consideration that using the same methodology that was used in different historic sites researches with positive results facilitates replication, we aimed to develop methodological procedures that identify conditions of physical accessibility in open public spaces and access to public buildings in historic urban sites to support proposals about design requirements for improvements to the problems diagnosed and control inadequacies of the physical environment. The study methods and techniques from different areas of knowledge culminated in a proposal built with an emphasis on user participation that could be applied with low cost and in relatively short period of time.

Risk Factors, Pathobiomechanics and Physical Examination of Rotator Cuff Tears

PubMed Central

Moulton, Samuel G.; Greenspoon, Joshua A.; Millett, Peter J.; Petri, Maximilian

2016-01-01

Background: It is important to appreciate the risk factors for the development of rotator cuff tears and specific physical examination maneuvers. Methods: A selective literature search was performed. Results: Numerous well-designed studies have demonstrated that common risk factors include age, occupation, and anatomic considerations such as the critical shoulder angle. Recently, research has also reported a genetic component as well. The rotator cuff axially compresses the humeral head in the glenohumeral joint and provides rotational motion and abduction. Forces are grouped into coronal and axial force couples. Rotator cuff tears are thought to occur when the force couples become imbalanced. Conclusion: Physical examination is essential to determining whether a patient has an anterosuperior or posterosuperior tear. Diagnostic accuracy increases when combining a series of examination maneuvers. PMID:27708731

Characterisation of FOGs in grease trap waste from the processing of chickens in Thailand.

PubMed

Nitayapat, Nuttakan; Chitprasert, Pakamon

2014-06-01

Industrial firms that kill and process chickens generate wastewater that contains fat, oil, and grease (FOG). The FOGs are located in the fatty waste that is collected by floatation in grease traps. Chemical and physical characterisation of FOGs would provide useful information that would help in the development of methods designed to decrease the extent of pollution caused by disposal of the waste and to utilise commercially some of its lipid constituents. Employing these methods would enhance the profitability and competitive potential of these commercial organisations. Samples of grease trap waste from 14 firms in central Thailand have been examined. Due to the very different schemes of waste management employed by these firms, the physical appearance of their fatty wastes showed considerable variation. The chemical and physical properties of the FOGs present in these wastes showed considerable variation also. Large amounts of free fatty acids (10-70% as oleic acid) were detected in most of the 14 wastes and palmitic, cis-9-oleic, cis,cis-9,12-linoleic, stearic, and palmitoleic acids were the predominant species of free and esterified acids. Most of the FOGs were solid at temperatures below 40 °C. Many of them contained traces of heavy metals (Cu and Pb) and some contained traces of the pesticides dimethoate and cypermethrin. The content of these potentially hazardous substances would have to be considered very carefully before discarding the fatty wastes and during the development of methods designed to isolate their potentially profitable lipid constituents. Copyright © 2013 Elsevier Ltd. All rights reserved.

Adaptive and Resilient Soft Tensegrity Robots.

PubMed

Rieffel, John; Mouret, Jean-Baptiste

2018-04-17

Living organisms intertwine soft (e.g., muscle) and hard (e.g., bones) materials, giving them an intrinsic flexibility and resiliency often lacking in conventional rigid robots. The emerging field of soft robotics seeks to harness these same properties to create resilient machines. The nature of soft materials, however, presents considerable challenges to aspects of design, construction, and control-and up until now, the vast majority of gaits for soft robots have been hand-designed through empirical trial-and-error. This article describes an easy-to-assemble tensegrity-based soft robot capable of highly dynamic locomotive gaits and demonstrating structural and behavioral resilience in the face of physical damage. Enabling this is the use of a machine learning algorithm able to discover effective gaits with a minimal number of physical trials. These results lend further credence to soft-robotic approaches that seek to harness the interaction of complex material dynamics to generate a wealth of dynamical behaviors.

Mothers and teenage daughters walking to health: using the behaviour change wheel to develop an intervention to improve adolescent girls' physical activity.

PubMed

Murtagh, E M; Barnes, A T; McMullen, J; Morgan, P J

2018-05-01

The majority of adolescent girls fail to meet public health guidelines for physical activity. Engaging mothers in the promotion of physical activity for their daughters may be an important strategy to facilitate behaviour change. The aim of this study was to use the behaviour change wheel (BCW) framework to design the components of an intervention to improve adolescent girls' physical activity. Cross-sectional study to inform intervention development. The BCW framework was used to (1) understand the behaviour, (2) identify intervention functions and (3) select content and implementation options. A circular development process was undertaken by the research team to collectively design the intervention in accordance with the steps recommended by the BCW. The BCW design process resulted in the selection of six intervention functions (education, persuasion, incentivization, training, modelling, enablement) and 18 behaviour change techniques delivered via group-based, face-to-face mode. Behaviour change technique groupings include: goals and planning; feedback and monitoring; social support; shaping knowledge; natural consequences; comparison of behaviour; associations; comparison of outcomes; reward and threat; identity; and, self-belief. The BCW process allowed an in-depth consideration of the target behaviours and provided a systematic framework for developing the intervention. The feasibility and preliminary efficacy of the programme will be examined. Copyright © 2018 The Royal Society for Public Health. Published by Elsevier Ltd. All rights reserved.

Why Cosmic Fine-Tuning Needs to BE Explained

NASA Astrophysics Data System (ADS)

Manson, Neil Alan

Discoveries in modern physics and Big Bang cosmology indicate that if either the initial conditions of the universe or the physical laws governing its development had differed even slightly, life could never have developed. It is for this reason that the universe is said to be ``fine-tuned'' for life. I argue that cosmic fine-tuning, which some want to dismiss as the way things just happen to be, in fact needs to be explained. In Chapter One I provide an overview of the evidence that the universe is fine-tuned for life. In Chapter Two I present a set of sufficient conditions for a fact's needing to be explained. The conditions are that the fact is improbable and that a ``tidy'' explanation of it is available. A tidy explanation of a fact is considerably less improbable than that fact and makes the obtaining of that fact considerably less improbable. Chapters Three, Four, and Five are devoted to showing that cosmic Chapter Three I argue that the universe's being finely tuned for life can meaningfully be considered improbable. In Chapter Four I claim that there is at least one tidy explanation of cosmic fine-tuning: that the universe was created by some sort of extramundane designer. In Chapters Four and Five I respond to three objections. The first is that the design hypothesis is ad hoc. The second is that we have no reason to believe a supernatural designer would prefer life-permitting cosmoi to other possible cosmoi and that our tendency to believe otherwise is the result of anthropocentrism. The third is that the design hypothesis never buys us an explanatory advantage.

Barriers, Motivations, and Preferences for Physical Activity Among Female African American Older Adults.

PubMed

Gothe, Neha P; Kendall, Bradley J

2016-01-01

According to the Centers for Disease Control and Prevention, less than 11% of adults more than the age of 65 meet the 2008 Physical Activity Guidelines for Americans. Among minority populations, only 5% of non-Hispanic Black older adults met the guidelines. Given our limited understanding of psychosocial and environmental factors that affect physical activity participation in these groups, the purpose of our focus groups was to investigate barriers, motivators, and preferences of physical activity for community-dwelling African American older adults. Three focus groups were conducted with female African American older adults ( N = 20). Questions posed to each focus group targeted motivations and barriers toward physical activity as well as their preferences for physical activity. The motivations included perceived health benefits of physical activity, social support, and enjoyment associated with engagement in physical activity. Prominent barriers included time and physical limitations, peer pressure and family responsibilities, and weather and poor neighborhood conditions. Group activities involving a dance component and novel exercises such as tai-chi or yoga were preferred choices. These findings should be taken into consideration when designing and implementing research or community physical activity programs for female African American older adults.

Comparative laser Doppler measurement on tooth pulp blood flow at 632 and 750 nm

NASA Astrophysics Data System (ADS)

Oberg, P. Ake; Pettersson, Hans; Rohman, Hakan

1993-12-01

Laser-Doppler flowmetry has been used for the assessment of pulp blood flow in health and disease. General purpose laser Doppler instruments working at the Helium-Neon (632,8 nm) as well as IR (750 - 810 nm) wavelengths have been used in this application. Specially designed handheld equipment has also been used to assess blood supply to the tooth. A considerable difference in the measurement results have been noticed when using different wavelengths and probe designs. In this study some of the problems related to the use of various wavelengths and probe designs are studied in human teeth and in a physical model of a tooth. Our results support the early observation that measurements at different wavelengths and with different probe designs cannot be directly compared.

Gene–Physical Activity Interactions: Overview of Human Studies

PubMed Central

Rankinen, Tuomo; Bouchard, Claude

2009-01-01

Physical activity level is an important component of the total daily energy expenditure and as such contributes to body weight regulation. A body of data indicates that the level of physical activity plays a role in the risk of excessive weight gain, in weight loss programs, and particularly in the prevention of weight regain. Most studies dealing with potential gene–physical activity interaction effects use an exercise and fitness or performance paradigm as opposed to an obesity-driven model. From these studies, it is clear that there are considerable individual differences in the response to an exercise regimen and that there is a substantial familial aggregation component to the observed heterogeneity. Few studies have focused on the role of specific genes in accounting for the highly prevalent gene–exercise interaction effects. Results for specific genes have been inconsistent with few exceptions. Progress is likely to come when studies will be designed to truly address gene–exercise or physical activity interaction issues and with sample sizes that will provide adequate statistical power. PMID:19037212

Challenge Activities for the Physical Education Classroom: Considerations

ERIC Educational Resources Information Center

McKenzie, Emily; Tapps, Tyler; Fink, Kevin; Symonds, Matthew L.

2018-01-01

The purpose of this article is to provide physical education teachers with the tools to develop and implement challenge course-like activities in their physical education classes. The article also covers environmental considerations for teachers who have the desire to create a challenge-based classroom setting in order to reach a wider and more…

Current Considerations About the Elderly and Firearms

PubMed Central

Mertens, Brian

2012-01-01

In the United States, more than 17 million people aged 65 years or older own a firearm. They have the highest rate of suicide by a firearm, and recent data suggest that a disproportionate number apply to carry a concealed weapon. At least one new handgun has been designed and marketed for older people. Memory, thinking, and judgment as well as physical and behavioral competence issues related to an elderly person's safe operation of a motor vehicle apply to firearms, too. Gun availability can pose a particular risk to those with dementia and to their caretakers. The elderly constitute a substantial and rapidly growing population and market segment for whom the public health implications of firearm production, promotion, access, ownership, and use merit consideration. PMID:22390501

Current considerations about the elderly and firearms.

PubMed

Mertens, Brian; Sorenson, Susan B

2012-03-01

In the United States, more than 17 million people aged 65 years or older own a firearm. They have the highest rate of suicide by a firearm, and recent data suggest that a disproportionate number apply to carry a concealed weapon. At least one new handgun has been designed and marketed for older people. Memory, thinking, and judgment as well as physical and behavioral competence issues related to an elderly person's safe operation of a motor vehicle apply to firearms, too. Gun availability can pose a particular risk to those with dementia and to their caretakers. The elderly constitute a substantial and rapidly growing population and market segment for whom the public health implications of firearm production, promotion, access, ownership, and use merit consideration.

Basin view geothermal heating district, Klamath Falls, Oregon. Conceptual design and economic-feasibility study report

NASA Astrophysics Data System (ADS)

1981-07-01

The findings of a feasibility study performed for Basin View Heating District in Klamath Falls, Oregon are reported. The physical, economic, and political feasibility of establishing a geothermal heating district to provide space heat to housing units in the Basin View Development of Klamath Falls are determined. Of the several systems considered, all are physically feasible. The project is politically feasible if the owner complies with governmental requirements. Economic feasibility is based on considerations of money value rates, tax rates and expected rates of return, which are dependent on government and money markets. For analysis a money value rate of 21% and an owner's marginal tax rate of 35% were adopted.

Beam Dynamics Considerations in Electron Ion Colliders

NASA Astrophysics Data System (ADS)

Krafft, Geoffrey

2015-04-01

The nuclear physics community is converging on the idea that the next large project after FRIB should be an electron-ion collider. Both Brookhaven National Lab and Thomas Jefferson National Accelerator Facility have developed accelerator designs, both of which need novel solutions to accelerator physics problems. In this talk we discuss some of the problems that must be solved and their solutions. Examples in novel beam optics systems, beam cooling, and beam polarization control will be presented. Authored by Jefferson Science Associates, LLC under U.S. DOE Contract No. DE-AC05-06OR23177. The U.S. Government retains a non-exclusive, paid-up, irrevocable, world-wide license to publish or reproduce this manuscript for U.S. Government purposes.

Canadian Air Force Establishment Analysis: Creating a meta-methodology to address integrated questions of force structure, workforce planning and organizational design

DTIC Science & Technology

2010-01-28

Considerations – Position categories: • Hard • Generic or “ soft ” • Advanced Training – Language requirements – Need for • military, combat and/or field...Analysis (DGMPRA) Presentation to MORS WG Personnel and National Security: A Quantitative Approach 25-28 January 2010 Defence Research and...SUPPLEMENTARY NOTES Personnel and National Security: A Quantitative Approach (Unclass), 25-28 January 2010, Johns Hopkins University Applied Physics

Time-resolved methods in biophysics. 9. Laser temperature-jump methods for investigating biomolecular dynamics.

PubMed

Kubelka, Jan

2009-04-01

Many important biochemical processes occur on the time-scales of nanoseconds and microseconds. The introduction of the laser temperature-jump (T-jump) to biophysics more than a decade ago opened these previously inaccessible time regimes up to direct experimental observation. Since then, laser T-jump methodology has evolved into one of the most versatile and generally applicable methods for studying fast biomolecular kinetics. This perspective is a review of the principles and applications of the laser T-jump technique in biophysics. A brief overview of the T-jump relaxation kinetics and the historical development of laser T-jump methodology is presented. The physical principles and practical experimental considerations that are important for the design of the laser T-jump experiments are summarized. These include the Raman conversion for generating heating pulses, considerations of size, duration and uniformity of the temperature jump, as well as potential adverse effects due to photo-acoustic waves, cavitation and thermal lensing, and their elimination. The laser T-jump apparatus developed at the NIH Laboratory of Chemical Physics is described in detail along with a brief survey of other laser T-jump designs in use today. Finally, applications of the laser T-jump in biophysics are reviewed, with an emphasis on the broad range of problems where the laser T-jump methodology has provided important new results and insights into the dynamics of the biomolecular processes.

The theory of expanded, extended, and enhanced opportunities for youth physical activity promotion.

PubMed

Beets, Michael W; Okely, Anthony; Weaver, R Glenn; Webster, Collin; Lubans, David; Brusseau, Tim; Carson, Russ; Cliff, Dylan P

2016-11-16

Physical activity interventions targeting children and adolescents (≤18 years) often focus on complex intra- and inter-personal behavioral constructs, social-ecological frameworks, or some combination of both. Recently published meta-analytical reviews and large-scale randomized controlled trials have demonstrated that these intervention approaches have largely produced minimal or no improvements in young people's physical activity levels. In this paper, we propose that the main reason for previous studies' limited effects is that fundamental mechanisms that lead to change in youth physical activity have often been overlooked or misunderstood. Evidence from observational and experimental studies is presented to support the development of a new theory positing that the primary mechanisms of change in many youth physical activity interventions are approaches that fall into one of the following three categories: (a) the expansion of opportunities for youth to be active by the inclusion of a new occasion to be active, (b) the extension of an existing physical activity opportunity by increasing the amount of time allocated for that opportunity, and/or (c) the enhancement of existing physical activity opportunities through strategies designed to increase physical activity above routine practice. Their application and considerations for intervention design and interpretation are presented. The utility of these mechanisms, referred to as the Theory of Expanded, Extended, and Enhanced Opportunities (TEO), is demonstrated in their parsimony, logical appeal, support with empirical evidence, and the direct and immediate application to numerous settings and contexts. The TEO offers a new way to understand youth physical activity behaviors and provides a common taxonomy by which interventionists can identify appropriate targets for interventions across different settings and contexts. We believe the formalization of the TEO concepts will propel them to the forefront in the design of future intervention studies and through their use, lead to a greater impact on youth activity behaviors than what has been demonstrated in previous studies.

Design and assembly considerations for Redox cells and stacks

NASA Technical Reports Server (NTRS)

Stalnaker, D. K.; Lieberman, A.

1981-01-01

Individual redox flow cells are arranged electrically in series and hydraulically in parallel to form a single assembly called a stack. The hardware currently being tested in the laboratory has an active electrode area of either 310 sq cm or 929 sq cm. Four 310 sq cm stacks, each consisting of 39 active cells, were incorporated into a 1.0 kW preprototype system. The physical design of the stack is very critical to the performance and efficiency of the redox storage sytem. This report will discuss the mechanical aspects of the cell and stack design for the current Redox hardware, with regard to sealing the stack internally as well as externally, minimizing shunt currents and minimizing the electrical resistance of the stack.

Mechanical design and analysis of a low beta squeezed half-wave resonator

NASA Astrophysics Data System (ADS)

He, Shou-Bo; Zhang, Cong; Yue, Wei-Ming; Wang, Ruo-Xu; Xu, Meng-Xin; Wang, Zhi-Jun; Huang, Shi-Chun; Huang, Yu-Lu; Jiang, Tian-Cai; Wang, Feng-Feng; Zhang, Sheng-Xue; He, Yuan; Zhang, Sheng-Hu; Zhao, Hong-Wei

2014-08-01

A superconducting squeezed type half-wave resonator (HWR) of β=0.09 has been developed at the Institute of Modern Physics, Lanzhou. In this paper, a basic design is presented for the stiffening structure for the detuning effect caused by helium pressure and Lorentz force. The mechanical modal analysis has been investigated the with finite element method (FEM). Based on these considerations, a new stiffening structure is proposed for the HWR cavity. The computation results concerning the frequency shift show that the low beta HWR cavity with new stiffening structure has low frequency sensitivity coefficient df/dp and Lorentz force detuning coefficient KL, and stable mechanical properties.

Aircraft-Fuel-Tank Design for Liquid Hydrogen

NASA Technical Reports Server (NTRS)

Reynolds, T W

1955-01-01

Some of the considerations involved in the design of aircraft fuel tanks for liquid hydrogen are discussed herein. Several of the physical properties of metals and thermal insulators in the temperature range from ambient to liquid-hydrogen temperatures are assembled. Calculations based on these properties indicate that it is possible to build a large-size liquid-hydrogen fuel tank which (1) will weigh less then 15 percent of the fuel weight, (2) will have a hydrogen vaporization rate less than 30 percent of the cruise fuel-flow rate, and (3) can be held in a stand-by condition and readied for flight in a short time.

Space Settlements: A Design Study

NASA Technical Reports Server (NTRS)

Johnson, Richard D. (Editor); Holbrow, Charles (Editor)

1977-01-01

Nineteen professors of engineering, physical science, social science, and architecture, three volunteers, six students, a technical director, and two co-directors worked for ten weeks to construct a convincing picture of how people might permanently sustain life in space on a large scale, and to design a system for the colonization of space. Because the idea of colonizing space has awakened strong public interest, the document presented is written to be understood by the educated public and specialists in other fields. It also includes considerable background material. A table of units and conversion factors is included to aid the reader in interpreting the units of the metric system used in the report.

Laboratory and Physical Modelling of Building Ventilation Flows

NASA Astrophysics Data System (ADS)

Hunt, Gary

2001-11-01

Heating and ventilating buildings accounts for a significant fraction of the total energy budget of cities and an immediate challenge in building physics is for the design of sustainable, low-energy buildings. Natural ventilation provides a low-energy solution as it harness the buoyancy force associated with temperature differences between the internal and external environment, and the wind to drive a ventilating flow. Modern naturally-ventilated buildings use innovative design solutions, e.g. glazed atria and solar chimneys, to enhance the ventilation and demand for these and other designs has far outstripped our understanding of the fluid mechanics within these buildings. Developing an understanding of the thermal stratification and movement of air provides a considerable challenge as the flows involve interactions between stratification and turbulence and often in complex geometries. An approach that has provided significant new insight into these flows and which has led to the development of design guidelines for architects and ventilation engineers is laboratory modelling at small-scale in water tanks combined with physical modelling. Density differences to drive the flow in simplified plexiglass models of rooms or buildings are provided by fresh and salt water solutions, and wind flow is represented by a mean flow in a flume tank. In tandom with the experiments, theoretical models that capture the essential physics of these flows have been developed in order to generalise the experimental results to a wide range of typical building geometries and operating conditions. This paper describes the application and outcomes of these modelling techniques to the study of a variety of natural ventilation flows in buildings.

Summary of Technical Meeting To Compare US/French Approaches for Physical Protection Test Beds

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mack, Thomas Kimball; Martinez, Ruben; Thomas, Gerald

In September 2015, representatives of the US Department of Energy/National Nuclear Security Administration, including test bed professionals from Sandia National Laboratories, and representatives of the French Alternative Energies and Atomic Energy Commission participated in a one-week workshop to share best practices in design, organization, operations, utilization, improvement, and performance testing of physical protection test beds. The intended workshop outcomes were to (1) share methods of improving respective test bed methodologies and programs and (2) prepare recommendations for standards regarding creating and operating testing facilities for nations new to nuclear operations. At the workshop, the French and American subject matter expertsmore » compared best practices as developed at their respective test bed sites; discussed access delay test bed considerations; and presented the limitations/ constraints of physical protection test beds.« less

Sensing network for electromagnetic fields generated by seismic activities

NASA Astrophysics Data System (ADS)

Gershenzon, Naum I.; Bambakidis, Gust; Ternovskiy, Igor V.

2014-06-01

The sensors network is becoming prolific and play now increasingly more important role in acquiring and processing information. Cyber-Physical Systems are focusing on investigation of integrated systems that includes sensing, networking, and computations. The physics of the seismic measurement and electromagnetic field measurement requires special consideration how to design electromagnetic field measurement networks for both research and detection earthquakes and explosions along with the seismic measurement networks. In addition, the electromagnetic sensor network itself could be designed and deployed, as a research tool with great deal of flexibility, the placement of the measuring nodes must be design based on systematic analysis of the seismic-electromagnetic interaction. In this article, we review the observations of the co-seismic electromagnetic field generated by earthquakes and man-made sources such as vibrations and explosions. The theoretical investigation allows the distribution of sensor nodes to be optimized and could be used to support existing geological networks. The placement of sensor nodes have to be determined based on physics of electromagnetic field distribution above the ground level. The results of theoretical investigations of seismo-electromagnetic phenomena are considered in Section I. First, we compare the relative contribution of various types of mechano-electromagnetic mechanisms and then analyze in detail the calculation of electromagnetic fields generated by piezomagnetic and electrokinetic effects.

The development of a practical pipe auto-routing system in a shipbuilding CAD environment using network optimization

NASA Astrophysics Data System (ADS)

Kim, Shin-Hyung; Ruy, Won-Sun; Jang, Beom Seon

2013-09-01

An automatic pipe routing system is proposed and implemented. Generally, the pipe routing design as a part of the shipbuilding process requires a considerable number of man hours due to the complexity which comes from physical and operational constraints and the crucial influence on outfitting construction productivity. Therefore, the automation of pipe routing design operations and processes has always been one of the most important goals for improvements in shipbuilding design. The proposed system is applied to a pipe routing design in the engine room space of a commercial ship. The effectiveness of this system is verified as a reasonable form of support for pipe routing design jobs. The automatic routing result of this system can serve as a good basis model in the initial stages of pipe routing design, allowing the designer to reduce their design lead time significantly. As a result, the design productivity overall can be improved with this automatic pipe routing system

Optimization of a Lunar Pallet Lander Reinforcement Structure Using a Genetic Algorithm

NASA Technical Reports Server (NTRS)

Burt, Adam

2014-01-01

In this paper, a unique system level spacecraft design optimization will be presented. A Genetic Algorithm is used to design the global pattern of the reinforcing structure, while a gradient routine is used to adequately stiffen the sub-structure. The system level structural design includes determining the optimal physical location (and number) of reinforcing beams of a lunar pallet lander deck structure. Design of the substructure includes determining placement of secondary stiffeners and the number of rivets required for assembly.. In this optimization, several considerations are taken into account. The primary objective was to raise the primary natural frequencies of the structure such that the Pallet Lander primary structure does not significantly couple with the launch vehicle. A secondary objective is to determine how to properly stiffen the reinforcing beams so that the beam web resists the shear buckling load imparted by the spacecraft components mounted to the pallet lander deck during launch and landing. A third objective is that the calculated stress does not exceed the allowable strength of the material. These design requirements must be met while, minimizing the overall mass of the spacecraft. The final paper will discuss how the optimization was implemented as well as the results. While driven by optimization algorithms, the primary purpose of this effort was to demonstrate the capability of genetic algorithms to enable design automation in the preliminary design cycle. By developing a routine that can automatically generate designs through the use of Finite Element Analysis, considerable design efficiencies, both in time and overall product, can be obtained over more traditional brute force design methods.

How might we increase physical activity through dog walking?: A comprehensive review of dog walking correlates.

PubMed

Westgarth, Carri; Christley, Robert M; Christian, Hayley E

2014-08-20

Physical inactivity and sedentary behaviour are major threats to population health. A considerable proportion of people own dogs, and there is good evidence that dog ownership is associated with higher levels of physical activity. However not all owners walk their dogs regularly. This paper comprehensively reviews the evidence for correlates of dog walking so that effective interventions may be designed to increase the physical activity of dog owners. Published findings from 1990-2012 in both the human and veterinary literature were collated and reviewed for evidence of factors associated with objective and self-reported measures of dog walking behaviour, or reported perceptions about dog walking. Study designs included cross-sectional observational, trials and qualitative interviews. There is good evidence that the strength of the dog-owner relationship, through a sense of obligation to walk the dog, and the perceived support and motivation a dog provides for walking, is strongly associated with increased walking. The perceived exercise requirements of the dog may also be a modifiable point for intervention. In addition, access to suitable walking areas with dog supportive features that fulfil dog needs such as off-leash exercise, and that also encourage human social interaction, may be incentivising. Current evidence suggests that dog walking may be most effectively encouraged through targeting the dog-owner relationship and by providing dog-supportive physical environments. More research is required to investigate the influence of individual owner and dog factors on 'intention' to walk the dog as well as the influence of human social interaction whilst walking a dog. The effects of policy and cultural practices relating to dog ownership and walking should also be investigated. Future studies must be of a higher quality methodological design, including accounting for the effects of confounding between variables, and longitudinal designs and testing of interventions in a controlled design in order to infer causality.

A new method for designing dual foil electron beam forming systems. I. Introduction, concept of the method

NASA Astrophysics Data System (ADS)

Adrich, Przemysław

2016-05-01

In Part I of this work existing methods and problems in dual foil electron beam forming system design are presented. On this basis, a new method of designing these systems is introduced. The motivation behind this work is to eliminate the shortcomings of the existing design methods and improve overall efficiency of the dual foil design process. The existing methods are based on approximate analytical models applied in an unrealistically simplified geometry. Designing a dual foil system with these methods is a rather labor intensive task as corrections to account for the effects not included in the analytical models have to be calculated separately and accounted for in an iterative procedure. To eliminate these drawbacks, the new design method is based entirely on Monte Carlo modeling in a realistic geometry and using physics models that include all relevant processes. In our approach, an optimal configuration of the dual foil system is found by means of a systematic, automatized scan of the system performance in function of parameters of the foils. The new method, while being computationally intensive, minimizes the involvement of the designer and considerably shortens the overall design time. The results are of high quality as all the relevant physics and geometry details are naturally accounted for. To demonstrate the feasibility of practical implementation of the new method, specialized software tools were developed and applied to solve a real life design problem, as described in Part II of this work.

Design Considerations of a Virtual Laboratory for Advanced X-ray Sources

NASA Astrophysics Data System (ADS)

Luginsland, J. W.; Frese, M. H.; Frese, S. D.; Watrous, J. J.; Heileman, G. L.

2004-11-01

The field of scientific computation has greatly advanced in the last few years, resulting in the ability to perform complex computer simulations that can predict the performance of real-world experiments in a number of fields of study. Among the forces driving this new computational capability is the advent of parallel algorithms, allowing calculations in three-dimensional space with realistic time scales. Electromagnetic radiation sources driven by high-voltage, high-current electron beams offer an area to further push the state-of-the-art in high fidelity, first-principles simulation tools. The physics of these x-ray sources combine kinetic plasma physics (electron beams) with dense fluid-like plasma physics (anode plasmas) and x-ray generation (bremsstrahlung). There are a number of mature techniques and software packages for dealing with the individual aspects of these sources, such as Particle-In-Cell (PIC), Magneto-Hydrodynamics (MHD), and radiation transport codes. The current effort is focused on developing an object-oriented software environment using the Rational© Unified Process and the Unified Modeling Language (UML) to provide a framework where multiple 3D parallel physics packages, such as a PIC code (ICEPIC), a MHD code (MACH), and a x-ray transport code (ITS) can co-exist in a system-of-systems approach to modeling advanced x-ray sources. Initial software design and assessments of the various physics algorithms' fidelity will be presented.

Resistance Exercise for Knee Osteoarthritis

PubMed Central

Vincent, Kevin R.; Vincent, Heather K.

2013-01-01

The initiation, progression, and severity of knee osteoarthritis (OA) has been associated with decreased muscular strength and alterations in joint biomechanics. Chronic OA pain may lead to anxiety, depression, fear of movement, and poor psychological outlook. The fear of movement may prevent participation in exercise and social events which could lead to further physical and social isolation. Resistance exercise (RX) has been shown to be an effective intervention both for decreasing pain and for improving physical function and self-efficacy. RX may restore muscle strength and joint mechanics while improving physical function. RX may also normalize muscle firing patterns and joint biomechanics leading to reductions in joint pain and cartilage degradation. These physical adaptations could lead to improved self-efficacy and decreased anxiety and depression. RX can be prescribed and performed by patients across the OA severity spectrum. When designing and implementing an RX program for a patient with knee OA, it is important to consider both the degree of OA severity as well as the level of pain. RX, either in the home or at a fitness facility, is an important component of a comprehensive regimen designed to offset the physical and psychological limitations associated with knee OA. Unique considerations for this population include: 1) monitoring pain during and after exercise, 2) providing days of rest when disease flares occur, and 3) infusing variety into the exercise regimen to encourage adherence. PMID:22632702

Critical thinking: optimal outcomes through end user involvement in the design of critical care areas.

PubMed

Braun, Debra; Barnhardt, Kim

2014-01-01

Including end users in evidence-based design is vital to outcomes. The physical environment impacts caregiver efficiencies, safety, satisfaction, and quality of patient outcomes. End users are more than members of the organization: patients should have representation as well. Patients bring value by offering insight from a different perspective. Timing is key; therefore, it is critical in obtaining desired outcomes, to include end users as early as possible, gaining the most insight into the design of the build. Consideration should also be given to best practice standards, regulatory compliance, progressive sciences, and technologies. Another vital factor is education of the end users on their role and expectations for participation in a design team. When end users are educated and understand the significance of input, the design team will be able to conceive a critical care unit that will meet needs for today and be able to adapt to needs for the future.

The Work Design Method for Human Friendly

NASA Astrophysics Data System (ADS)

Harada, Narumi; Sasaki, Masatoshi; Ichikawa, Masami

In order to realize “the product life cycle with respect for human nature". we ought to make work design so that work environment should be configured to be sound in mind and body, with due consideration of not only physical but also mental factors from the viewpoint of workers. The former includes too heavy work, unreasonable working posture, local fatigue of the body, the safety, and working comfort, and the latter includes work motivation, work worthiness, stress, etc. For the purpose of evaluating the degree of working comfort and safety at human-oriented production lines, we acknowledged, for the work design, the effectiveness of the work designing technique with working time variation duly considered. And, we formulated a model for a mental factor experienced by workers from the degree of working delays. This study covers a work design technique we developed with the effect of the factor as the value of evaluation.

Automatic design and manufacture of robotic lifeforms.

PubMed

Lipson, H; Pollack, J B

2000-08-31

Biological life is in control of its own means of reproduction, which generally involves complex, autocatalysing chemical reactions. But this autonomy of design and manufacture has not yet been realized artificially. Robots are still laboriously designed and constructed by teams of human engineers, usually at considerable expense. Few robots are available because these costs must be absorbed through mass production, which is justified only for toys, weapons and industrial systems such as automatic teller machines. Here we report the results of a combined computational and experimental approach in which simple electromechanical systems are evolved through simulations from basic building blocks (bars, actuators and artificial neurons); the 'fittest' machines (defined by their locomotive ability) are then fabricated robotically using rapid manufacturing technology. We thus achieve autonomy of design and construction using evolution in a 'limited universe' physical simulation coupled to automatic fabrication.

Circadian rhythms as a basis for work organization: a study with live line electricians.

PubMed

Guimarães, Lia Buarque de Macedo; Ribeiro, Jose Luis Duarte; Saurin, Tarcísio Abreu; de Bittencourt Júnior, Paulo Ivo Homem

2013-02-01

With the assumption that circadian rhythms influence human performance, the work of live line electricians was reorganized and evaluated. The hypothesis was that in highly physical and attention-demanding work, the organization of tasks, according to the ideal period of day and day of week, should diminish stress and consequent work risks. There are only a few studies reporting the work of electricians and even fewer approaching work organization. Moreover, these investigations often do not consider human physiological limitations and capabilities as well as task demands. A new work system was proposed with consideration of (a) the circadian cycles and homeostatic processes; (b) the effect of heat, which is a zeitgeber (synchronizer) for the biological clocks; and (c) the degree of physical and mental demands of the different performed tasks, which was assessed on the basis of opinions of the electricians and physiological markers of stress that are controlled by circadian rhythms. The traditional and new systems were compared on the basis of two cognitive indices (the arrangement of matchsticks and the perception of a minute) and three physiological markers of mental-to-physical loads (heart frequency and the level of adrenaline and noradrenaline). Both physical and mental loads were reduced in the new system. Work organization should include consideration of human circadian rhythms, mainly when stressful and high-risk tasks are involved. The findings can be applied in any work design, but they are especially suited for highly demanding work carried out outdoors.

Functional Basis for Efficient Physical Layer Classical Control in Quantum Processors

NASA Astrophysics Data System (ADS)

Ball, Harrison; Nguyen, Trung; Leong, Philip H. W.; Biercuk, Michael J.

2016-12-01

The rapid progress seen in the development of quantum-coherent devices for information processing has motivated serious consideration of quantum computer architecture and organization. One topic which remains open for investigation and optimization relates to the design of the classical-quantum interface, where control operations on individual qubits are applied according to higher-level algorithms; accommodating competing demands on performance and scalability remains a major outstanding challenge. In this work, we present a resource-efficient, scalable framework for the implementation of embedded physical layer classical controllers for quantum-information systems. Design drivers and key functionalities are introduced, leading to the selection of Walsh functions as an effective functional basis for both programing and controller hardware implementation. This approach leverages the simplicity of real-time Walsh-function generation in classical digital hardware, and the fact that a wide variety of physical layer controls, such as dynamic error suppression, are known to fall within the Walsh family. We experimentally implement a real-time field-programmable-gate-array-based Walsh controller producing Walsh timing signals and Walsh-synthesized analog waveforms appropriate for critical tasks in error-resistant quantum control and noise characterization. These demonstrations represent the first step towards a unified framework for the realization of physical layer controls compatible with large-scale quantum-information processing.

Requirements for soldered electrical connections

NASA Technical Reports Server (NTRS)

1992-01-01

This publication is applicable to NASA programs involving solder connections for flight hardware, mission essential support equipment, and elements thereof. This publication sets forth hand and wave soldering requirements for reliable electrical connections. The prime consideration is the physical integrity of solder connections. Special requirements may exist which are not in conformance with the requirements of this publication. Design documentation contains the detail for these requirements, and they take precedence over conflicting portions of this publication when they are approved in writing by the procuring NASA installation.

Design and Evaluation of an Energy-Dense, Light-Weight Combat Ration to Sustain Land Forces Involved in High-Intensity, Short-Duration Operations

DTIC Science & Technology

2015-03-01

8260 kJ provided, and was less than the target of at least 90% consumption . The effect of this on cognitive and physical performance is unknown and...texture and flavour. Packaging, serve size, palatability in different environments, effects on morale, ease of consumption , preparation considerations...acids (found in fatty fish ), which may have several beneficial effects on military health and fitness (Lewis et al, 2011; Lewis & Bailes, 2011

Optical trapping

PubMed Central

Neuman, Keir C.; Block, Steven M.

2006-01-01

Since their invention just over 20 years ago, optical traps have emerged as a powerful tool with broad-reaching applications in biology and physics. Capabilities have evolved from simple manipulation to the application of calibrated forces on—and the measurement of nanometer-level displacements of—optically trapped objects. We review progress in the development of optical trapping apparatus, including instrument design considerations, position detection schemes and calibration techniques, with an emphasis on recent advances. We conclude with a brief summary of innovative optical trapping configurations and applications. PMID:16878180

Testing general relativity in space-borne and astronomical laboratories

NASA Technical Reports Server (NTRS)

Will, Clifford M.

1989-01-01

The current status of space-based experiments and astronomical observations designed to test the theory of general relativity is surveyed. Consideration is given to tests of post-Newtonian gravity, searches for feeble short-range forces and gravitomagnetism, improved measurements of parameterized post-Newtonian parameter values, explorations of post-Newtonian physics, tests of the Einstein equivalence principle, observational tests of post-Newtonian orbital effects, and efforts to detect quadrupole and dipole radiation damping. Recent numerical results are presented in tables.

Considerations for the Optimal Design of a Two-Way Interactive Distance Education Classroom.

ERIC Educational Resources Information Center

Gregg, Joe; Persichitte, Kay

To make effective use of a two-way interactive distance education system, classroom design should be a primary consideration. A properly designed classroom will enhance content objectives and increase acceptance of this type of instructional delivery. This paper describes key considerations for optimal design. Construction considerations include…

Nursing staff members' intentions to use physical restraints with older people: testing the theory of reasoned action.

PubMed

Werner, P; Mendelsson, G

2001-09-01

To examine nursing staff members' attitudes, subjective norms, moral obligations and intentions to use physical restraints, using the Theory of Reasoned Action (TRA). During the last two decades an extensive body of research has examined nurses' attitudes as one of the main factors affecting the decision to use or not to use physical restraints with older persons. However, no studies have examined empirically the antecedents to nurses' intentions to use physical restraints within a theoretically based framework. A correlational design was used with 303 nursing staff members from an 800-bed elder care hospital in central Israel. Participants completed a questionnaire including questions based on the TRA as well as socio-demographic and professional characteristics. Regression analyses found attitudes, subjective norms and moral considerations to be significantly associated to intention to use physical restraints with older people. The TRA explained 48% of the variance in nurses' intentions. The TRA proved to be a useful framework for examining nurses' intentions to use physical restraints. Nurses' attitudes, beliefs and expectations of significant others should be examined before implementing educational programmes regarding the use of physical restraints.

Measurement of Physical Activity and Energy Expenditure in Wheelchair Users: Methods, Considerations and Future Directions.

PubMed

Nightingale, Tom E; Rouse, Peter C; Thompson, Dylan; Bilzon, James L J

2017-12-01

Accurately measuring physical activity and energy expenditure in persons with chronic physical disabilities who use wheelchairs is a considerable and ongoing challenge. Quantifying various free-living lifestyle behaviours in this group is at present restricted by our understanding of appropriate measurement tools and analytical techniques. This review provides a detailed evaluation of the currently available measurement tools used to predict physical activity and energy expenditure in persons who use wheelchairs. It also outlines numerous considerations specific to this population and suggests suitable future directions for the field. Of the existing three self-report methods utilised in this population, the 3-day Physical Activity Recall Assessment for People with Spinal Cord Injury (PARA-SCI) telephone interview demonstrates the best reliability and validity. However, the complexity of interview administration and potential for recall bias are notable limitations. Objective measurement tools, which overcome such considerations, have been validated using controlled laboratory protocols. These have consistently demonstrated the arm or wrist as the most suitable anatomical location to wear accelerometers. Yet, more complex data analysis methodologies may be necessary to further improve energy expenditure prediction for more intricate movements or behaviours. Multi-sensor devices that incorporate physiological signals and acceleration have recently been adapted for persons who use wheelchairs. Population specific algorithms offer considerable improvements in energy expenditure prediction accuracy. This review highlights the progress in the field and aims to encourage the wider scientific community to develop innovative solutions to accurately quantify physical activity in this population.

Madres para la Salud: design of a theory-based intervention for postpartum Latinas.

PubMed

Keller, Colleen; Records, Kathie; Ainsworth, Barbara; Belyea, Michael; Permana, Paska; Coonrod, Dean; Vega-López, Sonia; Nagle-Williams, Allison

2011-05-01

Weight gain in young women suggests that childbearing may be an important contributor to the development of obesity in women. Depressive symptoms can interfere with resumption of normal activity levels following childbirth or with the initiation of or adherence to physical activity programs essential for losing pregnancy weight. Depression symptoms may function directly to promote weight gain through a physiologic mechanism. Obesity and its related insulin resistance may contribute to depressed mood physiologically. Although physical activity has well-established beneficial effects on weight management and depression, women tend to under participate in physical activity during childbearing years. Further, the mechanisms underpinning the interplay of overweight, obesity, physical activity, depression, and inflammatory processes are not clearly explained. This report describes the theoretical rationale, design considerations, and cultural relevance for "Madres para la Salud" [Mothers for Health]. Madres para la Salud is a 12 month prospective, randomized controlled trial exploring the effectiveness of a culturally specific intervention using "bouts" of physical activity to effect changes in body fat, systemic and fat tissue inflammation, and postpartum depression symptoms in sedentary postpartum Latinas. The significance and innovation of Madres para la Salud includes use of a theory-driven approach to intervention, specification and cultural relevance of a social support intervention, use of a Promotora model to incorporate cultural approaches, use of objective measures of physical activity in post partum Latinas women, and the examination of biomarkers indicative of cardiovascular risk related to physical activity behaviors in postpartum Latinas. Copyright © 2011 Elsevier Inc. All rights reserved.

Status of Simulations for the Cyclotron Laboratory at the Institute for Nuclear Research and Nuclear Energy

NASA Astrophysics Data System (ADS)

Asova, G.; Goutev, N.; Tonev, D.; Artinyan, A.

2018-05-01

The Institute for Nuclear Research and Nuclear Energy is preparing to operate a high-power cyclotron for production of radioisotopes for nuclear medicine, research in radiochemistry, radiobiology, nuclear physics, solid state physics. The cyclotron is a TR24 produced by ASCI, Canada, capable to deliver proton beams in the energy range of 15 to 24 MeV with current as high as 400 µA. Multiple extraction lines can be fed. The primary goal of the project is the production of PET and SPECT isotopes as 18F, 67,68Ga, 99mTc, etc. This contribution reports the status of the project. Design considerations for the cyclotron vault will be discussed for some of the target radioisotopes.

Programming languages and compiler design for realistic quantum hardware.

PubMed

Chong, Frederic T; Franklin, Diana; Martonosi, Margaret

2017-09-13

Quantum computing sits at an important inflection point. For years, high-level algorithms for quantum computers have shown considerable promise, and recent advances in quantum device fabrication offer hope of utility. A gap still exists, however, between the hardware size and reliability requirements of quantum computing algorithms and the physical machines foreseen within the next ten years. To bridge this gap, quantum computers require appropriate software to translate and optimize applications (toolflows) and abstraction layers. Given the stringent resource constraints in quantum computing, information passed between layers of software and implementations will differ markedly from in classical computing. Quantum toolflows must expose more physical details between layers, so the challenge is to find abstractions that expose key details while hiding enough complexity.

Numerical Ergonomics Analysis in Operation Environment of CNC Machine

NASA Astrophysics Data System (ADS)

Wong, S. F.; Yang, Z. X.

2010-05-01

The performance of operator will be affected by different operation environments [1]. Moreover, poor operation environment may cause health problems of the operator [2]. Physical and psychological considerations are two main factors that will affect the performance of operator under different conditions of operation environment. In this paper, applying scientific and systematic methods find out the pivot elements in the field of physical and psychological factors. There are five main factors including light, temperature, noise, air flow and space that are analyzed. A numerical ergonomics model has been built up regarding the analysis results which can support to advance the design of operation environment. Moreover, the output of numerical ergonomic model can provide the safe, comfortable, more productive conditions for the operator.

Zero-gravity cloud physics laboratory: Candidate experiments definition and preliminary concept studies

NASA Technical Reports Server (NTRS)

Eaton, L. R.; Greco, R. V.; Hollinden, A. B.

1973-01-01

The candidate definition studies on the zero-g cloud physics laboratory are covered. This laboratory will be an independent self-contained shuttle sortie payload. Several critical technology areas have been identified and studied to assure proper consideration in terms of engineering requirements for the final design. Areas include chambers, gas and particle generators, environmental controls, motion controls, change controls, observational techniques, and composition controls. This unique laboratory will allow studies to be performed without mechanical, aerodynamics, electrical, or other type techniques to support the object under study. This report also covers the candidate experiment definitions, chambers and experiment classes, laboratory concepts and plans, special supporting studies, early flight opportunities and payload planning data for overall shuttle payload requirements assessments.

Programming languages and compiler design for realistic quantum hardware

NASA Astrophysics Data System (ADS)

Chong, Frederic T.; Franklin, Diana; Martonosi, Margaret

2017-09-01

Quantum computing sits at an important inflection point. For years, high-level algorithms for quantum computers have shown considerable promise, and recent advances in quantum device fabrication offer hope of utility. A gap still exists, however, between the hardware size and reliability requirements of quantum computing algorithms and the physical machines foreseen within the next ten years. To bridge this gap, quantum computers require appropriate software to translate and optimize applications (toolflows) and abstraction layers. Given the stringent resource constraints in quantum computing, information passed between layers of software and implementations will differ markedly from in classical computing. Quantum toolflows must expose more physical details between layers, so the challenge is to find abstractions that expose key details while hiding enough complexity.

Hospital design for better infection control

PubMed Central

Lateef, Fatimah

2009-01-01

The physical design and infrastructure of a hospital or institution is an essential component of its infection control measure. Thus is must be a prerequisite to take these into consideration from the initial conception and planning stages of the building. The balance between designing a hospital to be an open, accessible and public place and the control to reduce the spread of infections diseases is a necessity. At Singapore General Hospital, many lessons were learnt during the SARS outbreak pertaining to this. During and subsequent to the SARS outbreak, many changes evolved in the hospital to enable us to handle and face any emerging infectious situation with calm, confidence and the knowledge that staff and patients will be in good stead. This paper will share some of our experiences as well as challenges PMID:20009307

MPD Thruster Performance Analytic Models

NASA Technical Reports Server (NTRS)

Gilland, James; Johnston, Geoffrey

2003-01-01

Magnetoplasmadynamic (MPD) thrusters are capable of accelerating quasi-neutral plasmas to high exhaust velocities using Megawatts (MW) of electric power. These characteristics make such devices worthy of consideration for demanding, far-term missions such as the human exploration of Mars or beyond. Assessment of MPD thrusters at the system and mission level is often difficult due to their status as ongoing experimental research topics rather than developed thrusters. However, in order to assess MPD thrusters utility in later missions, some adequate characterization of performance, or more exactly, projected performance, and system level definition are required for use in analyses. The most recent physical models of self-field MPD thrusters have been examined, assessed, and reconfigured for use by systems and mission analysts. The physical models allow for rational projections of thruster performance based on physical parameters that can be measured in the laboratory. The models and their implications for the design of future MPD thrusters are presented.

MPD Thruster Performance Analytic Models

NASA Technical Reports Server (NTRS)

Gilland, James; Johnston, Geoffrey

2007-01-01

Magnetoplasmadynamic (MPD) thrusters are capable of accelerating quasi-neutral plasmas to high exhaust velocities using Megawatts (MW) of electric power. These characteristics make such devices worthy of consideration for demanding, far-term missions such as the human exploration of Mars or beyond. Assessment of MPD thrusters at the system and mission level is often difficult due to their status as ongoing experimental research topics rather than developed thrusters. However, in order to assess MPD thrusters utility in later missions, some adequate characterization of performance, or more exactly, projected performance, and system level definition are required for use in analyses. The most recent physical models of self-field MPD thrusters have been examined, assessed, and reconfigured for use by systems and mission analysts. The physical models allow for rational projections of thruster performance based on physical parameters that can be measured in the laboratory. The models and their implications for the design of future MPD thrusters are presented.

Comprehensive rehabilitation of the child with osteogenesis imperfecta.

PubMed

Binder, H; Conway, A; Hason, S; Gerber, L H; Marini, J; Berry, R; Weintrob, J

1993-01-15

Children with osteogenesis imperfecta (OI) that results in considerable deformity are often viewed as poor candidates for aggressive physical therapy and rehabilitation. To determine if this view is realistic, we have entered almost 50 children with OI type III and OI type IV into a comprehensive graduated rehabilitation program, based at the National Institutes of Health, but designed to be implemented by continuing involvement of community resources. Children are begun in the program early with emphasis on gain of head and trunk control and progression to sitting and walking, if possible, with the aid of a variety of physical supports, including internal and external bracing. Although not conducted in a randomized fashion, the program's success in bringing children into graded exercise regimes and fostering their increased involvement in school and social situations suggest that aggressive physical therapy and rehabilitation have a major place in the overall care of the infants and children with OI.

Physics and engineering design of the accelerator and electron dump for SPIDER

NASA Astrophysics Data System (ADS)

Agostinetti, P.; Antoni, V.; Cavenago, M.; Chitarin, G.; Marconato, N.; Marcuzzi, D.; Pilan, N.; Serianni, G.; Sonato, P.; Veltri, P.; Zaccaria, P.

2011-06-01

The ITER Neutral Beam Test Facility (PRIMA) is planned to be built at Consorzio RFX (Padova, Italy). PRIMA includes two experimental devices: a full size ion source with low voltage extraction called SPIDER and a full size neutral beam injector at full beam power called MITICA. SPIDER is the first experimental device to be built and operated, aiming at testing the extraction of a negative ion beam (made of H- and in a later stage D- ions) from an ITER size ion source. The main requirements of this experiment are a H-/D- extracted current density larger than 355/285 A m-2, an energy of 100 keV and a pulse duration of up to 3600 s. Several analytical and numerical codes have been used for the design optimization process, some of which are commercial codes, while some others were developed ad hoc. The codes are used to simulate the electrical fields (SLACCAD, BYPO, OPERA), the magnetic fields (OPERA, ANSYS, COMSOL, PERMAG), the beam aiming (OPERA, IRES), the pressure inside the accelerator (CONDUCT, STRIP), the stripping reactions and transmitted/dumped power (EAMCC), the operating temperature, stress and deformations (ALIGN, ANSYS) and the heat loads on the electron dump (ED) (EDAC, BACKSCAT). An integrated approach, taking into consideration at the same time physics and engineering aspects, has been adopted all along the design process. Particular care has been taken in investigating the many interactions between physics and engineering aspects of the experiment. According to the 'robust design' philosophy, a comprehensive set of sensitivity analyses was performed, in order to investigate the influence of the design choices on the most relevant operating parameters. The design of the SPIDER accelerator, here described, has been developed in order to satisfy with reasonable margin all the requirements given by ITER, from the physics and engineering points of view. In particular, a new approach to the compensation of unwanted beam deflections inside the accelerator and a new concept for the ED have been introduced.

Cell design concepts for aqueous lithium-oxygen batteries: A model-based assessment

NASA Astrophysics Data System (ADS)

Grübl, Daniel; Bessler, Wolfgang G.

2015-11-01

Seven cell design concepts for aqueous (alkaline) lithium-oxygen batteries are investigated using a multi-physics continuum model for predicting cell behavior and performance in terms of the specific energy and specific power. Two different silver-based cathode designs (a gas diffusion electrode and a flooded cathode) and three different separator designs (a porous separator, a stirred separator chamber, and a redox-flow separator) are compared. Cathode and separator thicknesses are varied over a wide range (50 μm-20 mm) in order to identify optimum configurations. All designs show a considerable capacity-rate effect due to spatiotemporally inhomogeneous precipitation of solid discharge product LiOH·H2O. In addition, a cell design with flooded cathode and redox-flow separator including oxygen uptake within the external tank is suggested. For this design, the model predicts specific power up to 33 W/kg and specific energy up to 570 Wh/kg (gravimetric values of discharged cell including all cell components and catholyte except housing and piping).

The role of a posteriori mathematics in physics

NASA Astrophysics Data System (ADS)

MacKinnon, Edward

2018-05-01

The calculus that co-evolved with classical mechanics relied on definitions of functions and differentials that accommodated physical intuitions. In the early nineteenth century mathematicians began the rigorous reformulation of calculus and eventually succeeded in putting almost all of mathematics on a set-theoretic foundation. Physicists traditionally ignore this rigorous mathematics. Physicists often rely on a posteriori math, a practice of using physical considerations to determine mathematical formulations. This is illustrated by examples from classical and quantum physics. A justification of such practice stems from a consideration of the role of phenomenological theories in classical physics and effective theories in contemporary physics. This relates to the larger question of how physical theories should be interpreted.

Energy absorption capability and crashworthiness of composite material structures: A review

DOE Office of Scientific and Technical Information (OSTI.GOV)

Carruthers, J.J.; Kettle, A.P.; Robinson, A.M.

1998-10-01

The controlled brittle failure of thermosetting fiber-reinforced polymer composites can provide a very efficient energy absorption mechanism. Consequently, the use of these materials in crashworthy vehicle designs has been the subject of considerable interest. In this respect, their more widespread application has been limited by the complexity of their collapse behavior. This article reviews the current level of understanding i this field, including the correlations between failure mode and energy absorption, the principal material, geometric, and physical parameters relevant to crashworthy design and methods of predicting the energy absorption capability of polymer composites. Areas which require further investigation are identified.more » This review article contains 70 references.« less

Hand controllers for teleoperation. A state-of-the-art technology survey and evaluation

NASA Technical Reports Server (NTRS)

Brooks, T. L.; Bejczy, A. K.

1985-01-01

Hand controller technology for teleoperation is surveyed in three major catagories: (1) hand grip design, (2) control input devices, and (3) control strategies. In the first category, 14 hand grip designs are reviewed and evaluated in light of human factor considerations. In the second, 12 hand controller input devices are evaluated in terms of task performance, configuration and force feedback, controller/slave correspondence, operating volume, operator workload, human limitations, cross coupling, singularities, anthropomorphic characteristics, physical complexity, control/display interference, accuracy, technological base, cost, and reliability. In the third catagory, control strategies, commonly called control modes, are surveyed and evaluated. The report contains a bibliography with 189 select references on hand controller technology.

Considerations for designing robotic upper limb rehabilitation devices

NASA Astrophysics Data System (ADS)

Nadas, I.; Vaida, C.; Gherman, B.; Pisla, D.; Carbone, G.

2017-12-01

The present study highlights the advantages of robotic systems for post-stroke rehabilitation of the upper limb. The latest demographic studies illustrate a continuous increase of the average life span, which leads to a continuous increase of stroke incidents and patients requiring rehabilitation. Some studies estimate that by 2030 the number of physical therapists will be insufficient for the patients requiring physical rehabilitation, imposing a shift in the current methodologies. A viable option is the implementation of robotic systems that assist the patient in performing rehabilitation exercises, the physical therapist role being to establish the therapeutic program for each patient and monitor their individual progress. Using a set of clinical measurements for the upper limb motions, the analysis of rehabilitation robotic systems provides a comparative study between the motions required by clinicians and the ones that robotic systems perform for different therapeutic exercises. A critical analysis of existing robots is performed using several classifications: mechanical design, assistance type, actuation and power transmission, control systems and human robot interaction (HRI) strategies. This classification will determine a set of pre-requirements for the definition of new concepts and efficient solutions for robotic assisted rehabilitation therapy.

PROPOSAL FOR AN EXPERIMENT PROGRAM IN NEUTRINO PHYSICS AND PROTON DECAY IN THE HOMESTAKE LABORATORY.

DOE Office of Scientific and Technical Information (OSTI.GOV)

DIWAN, M.; KETTELL, S.; LITTENBERG, W.

2006-07-24

This report is intended to describe first, the principal physics reasons for an ambitious experimental program in neutrino physics and proton decay based on construction of a series of massive water Cherenkov detectors located deep underground (4850 ft) in the Homestake Mine of the South Dakota Science and Technology Authority (SDSTA); and second, the engineering design of the underground chambers to house the Cherenkov detector modules; and third, the conceptual design of the water Cherenkov detectors themselves for this purpose. In this proposal we show the event rates and physics sensitivity for beams from both FNAL (1300 km distant frommore » Homestake) and BNL (2540 km distant from Homestake). The program we propose will benefit with a beam from FNAL because of the high intensities currently available from the Main Injector with modest upgrades. The possibility of tuning the primary proton energy over a large range from 30 to 120 GeV also adds considerable flexibility to the program from FNAL. On the other hand the beam from BNL over the larger distance will produce very large matter effects, and consequently a hint of new physics (beyond CP violation) can be better tested with that configuration. In this proposal we focus on the CP violation physics. Included in this document are preliminary costs and time-to-completion estimates which have been exposed to acknowledged experts in their respective areas. This presentation is not, however, to be taken as a technical design report with the extensive documentation and contingency costs that a TDR usually entails. Nevertheless, some contingency factors have been included in the estimates given here. The essential ideas expressed here were first laid out in a letter of intent to the interim director of the Homestake Laboratory on July 26, 2001. Since that time, the prospect of a laboratory in the Homestake Mine has been realized, and the design of a long baseline neutrino experiment has been refined. The extrapolation contained in this proposal is within the common domain of thinking in the area of physics discussed here. It needs now only the encouragement of the funding agencies, NSF and DOE.« less

Design Considerations for a Water Treatment System Utilizing Ultra-Violet Light Emitting Diodes

DTIC Science & Technology

2014-03-27

DESIGN CONSIDERATIONS FOR A WATER TREATMENT SYSTEM UTILIZING ULTRA-VIOLET LIGHT EMITTING DIODES...the United States. ii AFIT-ENV-14-M-58 DESIGN CONSIDERATIONS FOR A WATER TREATMENT SYSTEM UTILIZING ULTRA-VIOLET LIGHT EMITTING DIODES...DISTRIBUTION UNLIMITED. iii AFIT-ENV-14-M-58 DESIGN CONSIDERATIONS FOR A WATER TREATMENT SYSTEM UTILIZING ULTRA-VIOLET LIGHT EMITTING

Electrical conductivity modeling and experimental study of densely packed SWCNT networks.

PubMed

Jack, D A; Yeh, C-S; Liang, Z; Li, S; Park, J G; Fielding, J C

2010-05-14

Single-walled carbon nanotube (SWCNT) networks have become a subject of interest due to their ability to support structural, thermal and electrical loadings, but to date their application has been hindered due, in large part, to the inability to model macroscopic responses in an industrial product with any reasonable confidence. This paper seeks to address the relationship between macroscale electrical conductivity and the nanostructure of a dense network composed of SWCNTs and presents a uniquely formulated physics-based computational model for electrical conductivity predictions. The proposed model incorporates physics-based stochastic parameters for the individual nanotubes to construct the nanostructure such as: an experimentally obtained orientation distribution function, experimentally derived length and diameter distributions, and assumed distributions of chirality and registry of individual CNTs. Case studies are presented to investigate the relationship between macroscale conductivity and nanostructured variations in the bulk stochastic length, diameter and orientation distributions. Simulation results correspond nicely with those available in the literature for case studies of conductivity versus length and conductivity versus diameter. In addition, predictions for the increasing anisotropy of the bulk conductivity as a function of the tube orientation distribution are in reasonable agreement with our experimental results. Examples are presented to demonstrate the importance of incorporating various stochastic characteristics in bulk conductivity predictions. Finally, a design consideration for industrial applications is discussed based on localized network power emission considerations and may lend insight to the design engineer to better predict network failure under high current loading applications.

A feasibility study of a culturally and gender-specific dance to promote physical activity for South Asian immigrant women in the greater Toronto area.

PubMed

Vahabi, Mandana; Damba, Cynthia

2015-01-01

Despite ample evidence demonstrating the protective effect of physical activity, the uptake of regular physical activity among South Asian (SA) women remains relatively low. The purpose of this study was to explore the feasibility and health impacts of implementing a culture- and gender-specific physical activity among SA immigrant women residing in Greater Toronto Area (GTA) in Ontario, Canada. A community-based mixed methods approach combining cohort pretest and posttest design and qualitative methods employing in depth interviews was used. Twenty-seven SA women from the GTA participated in a 6-week, 2 days per week, Bollywood Dance exercise program led by a female SA instructor. The participation rate was considerably high (85%) and approximately 82% of the participants attended 10 or more of the classes offered. The participants' physical measurements (weight, waist and hip, and body mass index) decreased, although not significantly, over the 6-week period and there was an improvement in their physical, mental, and social health. During the face-to-face interviews, participants reported feeling less stressed and tired, being more mentally and physically robust, and having a sense of fulfillment and self-satisfaction. The only common criticism expressed was that the 6-week duration of the intervention was too short. The results showed that the Bollywood Dance was a feasible strategy in engaging SA immigrant women in physical activity. The key aspects when designing culture- and gender-specific dance interventions include community participation and active engagement in planning and implementation of the program, a supportive environment, same gender and culturally attuned dance instructor, easy access, and minimal to no cost. Copyright © 2015 Jacobs Institute of Women's Health. Published by Elsevier Inc. All rights reserved.

Cherenkov radiation conversion and collection considerations for a gamma bang time/reaction history diagnostic for the NIF.

PubMed

Herrmann, Hans W; Mack, Joseph M; Young, Carlton S; Malone, Robert M; Stoeffl, Wolfgang; Horsfield, Colin J

2008-10-01

Bang time and reaction history measurements are fundamental components of diagnosing inertial confinement fusion (ICF) implosions and will be essential contributors to diagnosing attempts at ignition on the National Ignition Facility (NIF). Fusion gammas provide a direct measure of fusion interaction rate without being compromised by Doppler spreading. Gamma-based gas Cherenkov detectors that convert fusion gamma rays to optical Cherenkov photons for collection by fast recording systems have been developed and fielded at Omega. These systems have established their usefulness in illuminating ICF physics in several experimental campaigns. Bang time precision better than 25 ps has been demonstrated, well below the 50 ps accuracy requirement defined by the NIF system design requirements. A comprehensive, validated numerical study of candidate systems is providing essential information needed to make a down selection based on optimization of sensitivity, bandwidth, dynamic range, cost, and NIF logistics. This paper presents basic design considerations arising from the two-step conversion process from gamma rays to relativistic electrons to UV/visible Cherenkov radiation.

Object reasoning for waste remediation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pennock, K.A.; Bohn, S.J.; Franklin, A.L.

1991-08-01

A large number of contaminated waste sites across the United States await size remediation efforts. These sites can be physically complex, composed of multiple, possibly interacting, contaminants distributed throughout one or more media. The Remedial Action Assessment System (RAAS) is being designed and developed to support decisions concerning the selection of remediation alternatives. The goal of this system is to broaden the consideration of remediation alternatives, while reducing the time and cost of making these considerations. The Remedial Action Assessment System is a hybrid system, designed and constructed using object-oriented, knowledge- based systems, and structured programming techniques. RAAS uses amore » combination of quantitative and qualitative reasoning to consider and suggest remediation alternatives. The reasoning process that drives this application is centered around an object-oriented organization of remediation technology information. This paper describes the information structure and organization used to support this reasoning process. In addition, the paper describes the level of detail of the technology related information used in RAAS, discusses required assumptions and procedural implications of these assumptions, and provides rationale for structuring RAAS in this manner. 3 refs., 3 figs.« less

Book Review: Book review

NASA Astrophysics Data System (ADS)

Wüthrich, Christian

Symmetry considerations stand at the core of classical and quantum physics. No modern-and few older-physical theories forgo the immense services that these considerations offer. It is therefore only natural that philosophers of physics have increasingly started to study the motivations for, as well as the technical implementations and the interpretative implications of, symmetries in fundamental physics. Apart from the extraordinary foundational interest of symmetries, they provide a vehicle to study more general philosophical issues such as the relation between the physical world and its representations and between physics and mathematics. Moreover, traditional problems in metaphysics and philosophy of science such as the nature and status of laws of nature, scientific realism, and determinism naturally arise in, and enjoy substantial fertilisation from, the context of symmetries in physics.

TU-C-218-01: Effective Medical Imaging Physics Education.

PubMed

Sprawls, P

2012-06-01

A practical and applied knowledge of physics and the associated technology is required for the clinically effective and safe use of the various medical imaging modalities. This is needed by all involved in the imaging process, including radiologists, especially residents in training, technologists, and physicists who provide consultation on optimum and safe procedures and as educators for the other imaging professionals. This area of education is undergoing considerable change and evolution for three reasons: 1. Increasing capabilities and complexity of medical imaging technology and procedures, 2.Expanding scope and availability of educational resources, especially on the internet, and 3. A significant increase in our knowledge of the mental learning process and the design of learning activities to optimize effectiveness and efficiency, especially for clinically applied physics. This course will address those three issues by providing guidance on establishing appropriate clinically focused learning outcomes, a review of the brain function for enhancing clinically applied physics, and the design and delivery of effective learning activities beginning with the classroom and continuing through learning physics during the clinical practice of radiology. Characteristics of each type of learning activity will be considered with respect to effectiveness and efficiency in achieving appropriate learning outcomes. A variety of available resources will be identified and demonstrated for use in the different phases of learning process. A major focus is on enhancing the role of the medical physicist in clinical radiology both as a resource and educator with contemporary technology being the tool, but not the teacher. 1. Develop physics learning objectives that will support effective and safe medical imaging procedures. 2. Understand specific brain functions that are involved in learning and applying physics. 3. Describe the characteristics and development of mental knowledge structures for applied clinical physics. 4. List the established levels of learning and associate each with specific functions that can be performed. 5. Analyze the different types of learning activities (classroom, individual study, clinical, etc.) with respect to effectiveness and efficiency. 6. Design and Provide a comprehensive physics education program with each activity optimized with respect to outcomes and available resources. © 2012 American Association of Physicists in Medicine.

Designing degradable hydrogels for orthogonal control of cell microenvironments

PubMed Central

Kharkar, Prathamesh M.

2013-01-01

Degradable and cell-compatible hydrogels can be designed to mimic the physical and biochemical characteristics of native extracellular matrices and provide tunability of degradation rates and related properties under physiological conditions. Hence, such hydrogels are finding widespread application in many bioengineering fields, including controlled bioactive molecule delivery, cell encapsulation for controlled three-dimensional culture, and tissue engineering. Cellular processes, such as adhesion, proliferation, spreading, migration, and differentiation, can be controlled within degradable, cell-compatible hydrogels with temporal tuning of biochemical or biophysical cues, such as growth factor presentation or hydrogel stiffness. However, thoughtful selection of hydrogel base materials, formation chemistries, and degradable moieties is necessary to achieve the appropriate level of property control and desired cellular response. In this review, hydrogel design considerations and materials for hydrogel preparation, ranging from natural polymers to synthetic polymers, are overviewed. Recent advances in chemical and physical methods to crosslink hydrogels are highlighted, as well as recent developments in controlling hydrogel degradation rates and modes of degradation. Special attention is given to spatial or temporal presentation of various biochemical and biophysical cues to modulate cell response in static (i.e., non-degradable) or dynamic (i.e., degradable) microenvironments. This review provides insight into the design of new cell-compatible, degradable hydrogels to understand and modulate cellular processes for various biomedical applications. PMID:23609001

Usage of Parameterized Fatigue Spectra and Physics-Based Systems Engineering Models for Wind Turbine Component Sizing: Preprint

DOE Office of Scientific and Technical Information (OSTI.GOV)

Parsons, Taylor; Guo, Yi; Veers, Paul

Software models that use design-level input variables and physics-based engineering analysis for estimating the mass and geometrical properties of components in large-scale machinery can be very useful for analyzing design trade-offs in complex systems. This study uses DriveSE, an OpenMDAO-based drivetrain model that uses stress and deflection criteria to size drivetrain components within a geared, upwind wind turbine. Because a full lifetime fatigue load spectrum can only be defined using computationally-expensive simulations in programs such as FAST, a parameterized fatigue loads spectrum that depends on wind conditions, rotor diameter, and turbine design life has been implemented. The parameterized fatigue spectrummore » is only used in this paper to demonstrate the proposed fatigue analysis approach. This paper details a three-part investigation of the parameterized approach and a comparison of the DriveSE model with and without fatigue analysis on the main shaft system. It compares loads from three turbines of varying size and determines if and when fatigue governs drivetrain sizing compared to extreme load-driven design. It also investigates the model's sensitivity to shaft material parameters. The intent of this paper is to demonstrate how fatigue considerations in addition to extreme loads can be brought into a system engineering optimization.« less

Considerations for the Use of Remote Gaze Tracking to Assess Behavior in Flight Simulators

NASA Technical Reports Server (NTRS)

Kalar, Donald J.; Liston, Dorion; Mulligan, Jeffrey B.; Beutter, Brent; Feary, Michael

2016-01-01

Complex user interfaces (such as those found in an aircraft cockpit) may be designed from first principles, but inevitably must be evaluated with real users. User gaze data can provide valuable information that can help to interpret other actions that change the state of the system. However, care must be taken to ensure that any conclusions drawn from gaze data are well supported. Through a combination of empirical and simulated data, we identify several considerations and potential pitfalls when measuring gaze behavior in high-fidelity simulators. We show that physical layout, behavioral differences, and noise levels can all substantially alter the quality of fit for algorithms that segment gaze measurements into individual fixations. We provide guidelines to help investigators ensure that conclusions drawn from gaze tracking data are not artifactual consequences of data quality or analysis techniques.

Toxicity testing of chemical mixtures: some general aspects and need of international guidelines.

PubMed

Kappus, H; Yang, R S

1996-01-01

The topics discussed by the Working Group on Toxicity Testing of Chemical Mixtures included the following (1) the study designs and results from two real-life exposure scenarios as additional information to the various investigations reported at the conference; (2) the need to take into consideration low-level, long-term exposure (i.e. mimicking human exposure conditions) as well as the issue of limited resources in experimental toxicology studies; (3) the importance of exploring alternative and predictive toxicology methodologies to minimize animal use and to conserve resources; (4) the realization that interactive toxicity should include the consideration of physical and biological agents in addition to chemicals. Two specific studies reported at the conference were also discussed. A number of recommendations were made concerning the planning and implementation of toxicology studies on chemical mixtures.

A Critical Review of Dental Implant Materials with an Emphasis on Titanium versus Zirconia

PubMed Central

Osman, Reham B.; Swain, Michael V.

2015-01-01

The goal of the current publication is to provide a comprehensive literature review on the topic of dental implant materials. The following paper focuses on conventional titanium implants and more recently introduced and increasingly popular zirconia implants. Major subtopics include the material science and the clinical considerations involving both implant materials and the influence of their physical properties on the treatment outcome. Titanium remains the gold standard for the fabrication of oral implants, even though sensitivity does occur, though its clinical relevance is not yet clear. Zirconia implants may prove to be promising in the future; however, further in vitro and well-designed in vivo clinical studies are needed before such a recommendation can be made. Special considerations and technical experience are needed when dealing with zirconia implants to minimize the incidence of mechanical failure. PMID:28787980

Introduction to Heat Pipes

NASA Technical Reports Server (NTRS)

Ku, Jentung

2015-01-01

This is the presentation file for the short course Introduction to Heat Pipes, to be conducted at the 2015 Thermal Fluids and Analysis Workshop, August 3-7, 2015, Silver Spring, Maryland. NCTS 21070-15. Course Description: This course will present operating principles of the heat pipe with emphases on the underlying physical processes and requirements of pressure and energy balance. Performance characterizations and design considerations of the heat pipe will be highlighted. Guidelines for thermal engineers in the selection of heat pipes as part of the spacecraft thermal control system, testing methodology, and analytical modeling will also be discussed.

Definition of avionics concepts for a heavy lift cargo vehicle. Volume 1: Executive summary

NASA Technical Reports Server (NTRS)

1989-01-01

A cost effective, multiuser simulation, test, and demonstration facility to support the development of avionics systems for future space vehicles is examined. The technology needs and requirements of future Heavy Lift Cargo Vehicles (HLCVs) are analyzed and serve as the basis for sizing of the avionics facility, although the lab is not limited in use to support of HLCVs. Volume 1 provides a summary of the vehicle avionics trade studies, the avionics lab objectives, a summary of the lab's functional requirements and design, physical facility considerations, and cost estimates.

MEMS-based thermoelectric infrared sensors: A review

NASA Astrophysics Data System (ADS)

Xu, Dehui; Wang, Yuelin; Xiong, Bin; Li, Tie

2017-12-01

In the past decade, micro-electromechanical systems (MEMS)-based thermoelectric infrared (IR) sensors have received considerable attention because of the advances in micromachining technology. This paper presents a review of MEMS-based thermoelectric IR sensors. The first part describes the physics of the device and discusses the figures of merit. The second part discusses the sensing materials, thermal isolation microstructures, absorber designs, and packaging methods for these sensors and provides examples. Moreover, the status of sensor implementation technology is examined from a historical perspective by presenting findings from the early years to the most recent findings.

Experiment Definition Using the Space Laboratory, Long Duration Exposure Facility, and Space Transportation System Shuttle

NASA Technical Reports Server (NTRS)

Sheppard, Albert P.; Wood, Joan M.

1976-01-01

Candidate experiments designed for the space shuttle transportation system and the long duration exposure facility are summarized. The data format covers: experiment title, Experimenter, technical abstract, benefits/justification, technical discussion of experiment approach and objectives, related work and experience, experiment facts space properties used, environmental constraints, shielding requirements, if any, physical description, and sketch of major elements. Information was also included on experiment hardware, research required to develop experiment, special requirements, cost estimate, safety considerations, and interactions with spacecraft and other experiments.

Evaluation of some significant issues affecting trajectory and control management for air-breathing hypersonic vehicles

NASA Technical Reports Server (NTRS)

Hattis, Philip D.; Malchow, Harvey L.

1992-01-01

Horizontal takeoff airbreathing-propulsion launch vehicles require near-optimal guidance and control which takes into account performance sensitivities to atmospheric characteristics while satisfying physically-derived operational constraints. A generic trajectory/control analysis tool that deepens insight into these considerations has been applied to two versions of a winged-cone vehicle model. Information that is critical to the design and trajectory of these vehicles is derived, and several unusual characteristics of the airbreathing propulsion model are shown to have potentially substantial effects on vehicle dynamics.

MDO and Cross-Disciplinary Practice in R&D: A Portrait of Principles and Current Practice

NASA Technical Reports Server (NTRS)

Rivas McGowan, Anna-Maria; Papalambros, Panos Y.; Baker, Wayne E.

2014-01-01

For several decades, Multidisciplinary Design Optimization (MDO) has served an important role in aerospace engineering by incorporating physics based disciplinary models into integrated system or sub-system models for use in research, development, (R&D) and design. This paper examines MDO's role in facilitating the integration of the researchers from different single disciplines during R&D and early design of large-scale complex engineered systems (LaCES) such as aerospace systems. The findings in this paper are summarized from a larger study on interdisciplinary practices and perspectives that included considerable empirical data from surveys, interviews, and ethnography. The synthesized findings were derived by integrating the data with theories from organization science and engineering. The over-arching finding is that issues related to cognition, organization, and social interrelations mostly dominate interactions across disciplines. Engineering issues, such as the integration of hardware or physics-based models, are not as significant. Correspondingly, the data showed that MDO is not the primary integrator of researchers working across disciplines during R&D and early design of LaCES. Cognitive focus such as analysis versus design, organizational challenges such as incentives, and social opportunities such as personal networks often drove the human interactive practices among researchers from different disciplines. Facilitation of the inherent confusion, argument, and learning in crossdisciplinary research was identified as one of several needed elements of enabling successful research across disciplines.

DriveID: safety innovation through individuation.

PubMed

Sawyer, Ben; Teo, Grace; Mouloua, Mustapha

2012-01-01

The driving task is highly complex and places considerable perceptual, physical and cognitive demands on the driver. As driving is fundamentally an information processing activity, distracted or impaired drivers have diminished safety margins compared with non- distracted drivers (Hancock and Parasuraman, 1992; TRB 1998 a & b). This competition for sensory and decision making capacities can lead to failures that cost lives. Some groups, teens and elderly drivers for example, have patterns of systematically poor perceptual, physical and cognitive performance while driving. Although there are technologies developed to aid these different drivers, these systems are often misused and underutilized. The DriveID project aims to design and develop a passive, automated face identification system capable of robustly identifying the driver of the vehicle, retrieve a stored profile, and intelligently prescribing specific accident prevention systems and driving environment customizations.

46 CFR 177.340 - Alternate design considerations.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 7 2010-10-01 2010-10-01 false Alternate design considerations. 177.340 Section 177.340... TONS) CONSTRUCTION AND ARRANGEMENT Hull Structure § 177.340 Alternate design considerations. When the structure of vessel is of novel design, unusual form, or special materials, which cannot be reviewed or...

Envisioning future cognitive telerehabilitation technologies: a co-design process with clinicians.

PubMed

How, Tuck-Voon; Hwang, Amy S; Green, Robin E A; Mihailidis, Alex

2017-04-01

Purpose Cognitive telerehabilitation is the concept of delivering cognitive assessment, feedback, or therapeutic intervention at a distance through technology. With the increase of mobile devices, wearable sensors, and novel human-computer interfaces, new possibilities are emerging to expand the cognitive telerehabilitation paradigm. This research aims to: (1) explore design opportunities and considerations when applying emergent pervasive computing technologies to cognitive telerehabilitation and (2) develop a generative co-design process for use with rehabilitation clinicians. Methods We conducted a custom co-design process that used design cards, probes, and design sessions with traumatic brain injury (TBI) clinicians. All field notes and transcripts were analyzed qualitatively. Results Potential opportunities for TBI cognitive telerehabilitation exist in the areas of communication competency, executive functioning, emotional regulation, energy management, assessment, and skill training. Designers of TBI cognitive telerehabilitation technologies should consider how technologies are adapted to a patient's physical/cognitive/emotional state, their changing rehabilitation trajectory, and their surrounding life context (e.g. social considerations). Clinicians were receptive to our co-design approach. Conclusion Pervasive computing offers new opportunities for life-situated cognitive telerehabilitation. Convivial design methods, such as this co-design process, are a helpful way to explore new design opportunities and an important space for further methodological development. Implications for Rehabilitation Designers of rehabilitation technologies should consider how to extend current design methods in order to facilitate the creative contribution of rehabilitation stakeholders. This co-design approach enables a fuller participation from rehabilitation clinicians at the front-end of design. Pervasive computing has the potential to: extend the duration and intensity of cognitive telerehabilitation training (including the delivery of 'booster' sessions or maintenance therapies); provide assessment and treatment in the context of a traumatic brain injury (TBI) patient's everyday life (thereby enhancing generalization); and permit time-sensitive interventions. Long-term use of pervasive computing for TBI cognitive telerehabilitation should take into account a patient's changing recovery trajectory, their meaningful goals, and their journey from loss to redefinition.

Physics Design Considerations for Diagnostic X Electron Beam Transport System

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chen, Y-J

2000-04-10

The Diagnostic X (D-X) beamlines will transport the DARHT-II beam from the end of the accelerator to the Diagnostic X firing point providing four lines of sight for x-ray radiography. The design goal for the Diagnostic X beamline is to deliver four x-ray pulses with the DARHT-II dose format and time integrated spot size on each line of sight. The D-X beamline's final focus should be compatible with a range of first conjugates from 1 m-5 m. Furthermore, the D-X beamline operational parameters and the beamline layout should not preclude a possible upgrade to additional lines of sight. The DARHT-IImore » accelerator is designed to deliver beams at a rate of 1 pulse per minute or less. Tuning the D-X beamline with several hundred optical elements would be time consuming. Therefore, minimizing the required number of tuning shots for the D-X beamline is also an important design goal. Many different beamline configurations may be able to accomplish these design objectives, and high beam quality (i.e., high current and low emittance) must be maintained throughout the chosen beamline configuration in order to achieve the DARHT-II x-ray dose format. In general, the longer the distance a beam travels, the harder it is to preserve the beam quality. Therefore, from the point of view of maintaining beam quality, it is highly desirable to minimize the beamline length. Lastly, modification to the DARHT-II building and the downstream transport should be minimized. Several processes can degrade beam quality by increasing the beam emittance, increasing the time-varying transverse beam motion, creating a beam halo, or creating a time-varying beam envelope. In this report, we consider those processes in the passive magnet lattice beamline and indicate how they constrain the beamline design. The physics design considerations for the active components such as the kicker system will be discussed in Ref. 2. In Sec. I, we discuss how beam emittance affects the x-ray forward dose. We also establish a physics design goal for the emittance growth budget. In Sec. II, we discuss how the conductivity and size of the beam pipe affects the transverse beam motion. We also discuss the emittance growth arise from the beam centroid offset. In Sec. III, we discuss the background gas focusing effects and establish the vacuum requirements. In Sec. IV, we consider the emittance growth in a bend. In Sec. V, we discuss the misalignment and corkscrew motion. The design specifications for misalignment are established. In Secs. VI and VII, we discuss the design objectives on how to extract beams from the DARHT-II beamline and how to minimize the tuning shots. The integrated spot size and final focusing are discussed in Sec. VIII. A conclusion will be presented in Sec. IX.« less

Glass for low-cost photovoltaic solar arrays

NASA Technical Reports Server (NTRS)

Bouquet, F. L.

1980-01-01

Various aspects of glass encapsulation that are important for the designer of photovoltaic systems are discussed. Candidate glasses and available information defining the state of the art of glass encapsulation materials and processes for automated, high volume production of terrestrial photovoltaic devices and related applications are presented. The criteria for consideration of the glass encapsulation systems were based on the low-cost solar array project goals for arrays: (1) a low degradation rate, (2) high reliability, (3) an efficiency greater than 10 percent, (4) a total array price less than $500/kW, and (5) a production capacity of 500,000 kW/yr. The glass design areas discussed include the types of glass, sources and costs, physical properties, and glass modifications, such as antireflection coatings.

Augmenting endogenous repair of soft tissues with nanofibre scaffolds

PubMed Central

Snelling, Sarah; Dakin, Stephanie; Carr, Andrew

2018-01-01

As our ability to engineer nanoscale materials has developed we can now influence endogenous cellular processes with increasing precision. Consequently, the use of biomaterials to induce and guide the repair and regeneration of tissues is a rapidly developing area. This review focuses on soft tissue engineering, it will discuss the types of biomaterial scaffolds available before exploring physical, chemical and biological modifications to synthetic scaffolds. We will consider how these properties, in combination, can provide a precise design process, with the potential to meet the requirements of the injured and diseased soft tissue niche. Finally, we frame our discussions within clinical trial design and the regulatory framework, the consideration of which is fundamental to the successful translation of new biomaterials. PMID:29695606

Contemporary research on parenting: conceptual, methodological, and translational issues.

PubMed

Power, Thomas G; Sleddens, Ester F C; Berge, Jerica; Connell, Lauren; Govig, Bert; Hennessy, Erin; Liggett, Leanne; Mallan, Kimberley; Santa Maria, Diane; Odoms-Young, Angela; St George, Sara M

2013-08-01

Researchers over the last decade have documented the association between general parenting style and numerous factors related to childhood obesity (e.g., children's eating behaviors, physical activity, and weight status). Many recent childhood obesity prevention programs are family focused and designed to modify parenting behaviors thought to contribute to childhood obesity risk. This article presents a brief consideration of conceptual, methodological, and translational issues that can inform future research on the role of parenting in childhood obesity. They include: (1) General versus domain specific parenting styles and practices; (2) the role of ethnicity and culture; (3) assessing bidirectional influences; (4) broadening assessments beyond the immediate family; (5) novel approaches to parenting measurement; and (6) designing effective interventions. Numerous directions for future research are offered.

A systematic review of the benefits of physical therapy within a multidisciplinary care approach for people with schizophrenia: An update.

PubMed

Vera-Garcia, Elisa; Mayoral-Cleries, Fermín; Vancampfort, Davy; Stubbs, Brendon; Cuesta-Vargas, Antonio I

2015-10-30

This systematic review summarizes the most recent evidence from randomized controlled trials (RCTs) considering the effectiveness of physical therapy interventions (aerobic exercises, strength exercises, relaxation training, basic body awareness exercises, or a combination of these) within the multidisciplinary management of schizophrenia. Two authors searched PubMed, PsycINFO, EMBASE, Web of Science, Physiotherapy Evidence Database (PEDro), and the Cochrane Library considering RCTs published from July 1, 2011-October 1, 2014. Thirteen RCTs representing 549 participants met the inclusion criteria. Overall, the results demonstrate that aerobic exercise significantly reduces psychiatric symptoms, potentially improves mental and physical quality of life and reduces metabolic risk and weight. Specifically, yoga reduces psychiatric symptoms, whilst Tai-chi and progressive muscle relaxation may also have benefits to patients. Two RCTs reported on adverse events. No adverse event was observed supporting the notion that physical therapy is safe in people with schizophrenia. There was considerable heterogeneity in the design, implementation and outcomes in the included studies precluding a meaningful meta-analysis. In general, the quality of physical therapy RCTS is improving and current research demonstrates that physical therapy approaches are valuable interventions and can help improve the psychiatric, physical and quality of life of people with schizophrenia. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

Approximation, abstraction and decomposition in search and optimization

NASA Technical Reports Server (NTRS)

Ellman, Thomas

1992-01-01

In this paper, I discuss four different areas of my research. One portion of my research has focused on automatic synthesis of search control heuristics for constraint satisfaction problems (CSPs). I have developed techniques for automatically synthesizing two types of heuristics for CSPs: Filtering functions are used to remove portions of a search space from consideration. Another portion of my research is focused on automatic synthesis of hierarchic algorithms for solving constraint satisfaction problems (CSPs). I have developed a technique for constructing hierarchic problem solvers based on numeric interval algebra. Another portion of my research is focused on automatic decomposition of design optimization problems. We are using the design of racing yacht hulls as a testbed domain for this research. Decomposition is especially important in the design of complex physical shapes such as yacht hulls. Another portion of my research is focused on intelligent model selection in design optimization. The model selection problem results from the difficulty of using exact models to analyze the performance of candidate designs.

Optimization of coupled multiphysics methodology for safety analysis of pebble bed modular reactor

NASA Astrophysics Data System (ADS)

Mkhabela, Peter Tshepo

The research conducted within the framework of this PhD thesis is devoted to the high-fidelity multi-physics (based on neutronics/thermal-hydraulics coupling) analysis of Pebble Bed Modular Reactor (PBMR), which is a High Temperature Reactor (HTR). The Next Generation Nuclear Plant (NGNP) will be a HTR design. The core design and safety analysis methods are considerably less developed and mature for HTR analysis than those currently used for Light Water Reactors (LWRs). Compared to LWRs, the HTR transient analysis is more demanding since it requires proper treatment of both slower and much longer transients (of time scale in hours and days) and fast and short transients (of time scale in minutes and seconds). There is limited operation and experimental data available for HTRs for validation of coupled multi-physics methodologies. This PhD work developed and verified reliable high fidelity coupled multi-physics models subsequently implemented in robust, efficient, and accurate computational tools to analyse the neutronics and thermal-hydraulic behaviour for design optimization and safety evaluation of PBMR concept The study provided a contribution to a greater accuracy of neutronics calculations by including the feedback from thermal hydraulics driven temperature calculation and various multi-physics effects that can influence it. Consideration of the feedback due to the influence of leakage was taken into account by development and implementation of improved buckling feedback models. Modifications were made in the calculation procedure to ensure that the xenon depletion models were accurate for proper interpolation from cross section tables. To achieve this, the NEM/THERMIX coupled code system was developed to create the system that is efficient and stable over the duration of transient calculations that last over several tens of hours. Another achievement of the PhD thesis was development and demonstration of full-physics, three-dimensional safety analysis methodology for the PBMR to provide reference solutions. Investigation of different aspects of the coupled methodology and development of efficient kinetics treatment for the PBMR were carried out, which accounts for all feedback phenomena in an efficient manner. The OECD/NEA PBMR-400 coupled code benchmark was used as a test matrix for the proposed investigations. The integrated thermal-hydraulics and neutronics (multi-physics) methods were extended to enable modeling of a wider range of transients pertinent to the PBMR. First, the effect of the spatial mapping schemes (spatial coupling) was studied and quantified for different types of transients, which resulted in implementation of improved mapping methodology based on user defined criteria. The second aspect that was studied and optimized is the temporal coupling and meshing schemes between the neutronics and thermal-hydraulics time step selection algorithms. The coupled code convergence was achieved supplemented by application of methods to accelerate it. Finally, the modeling of all feedback phenomena in PBMRs was investigated and a novel treatment of cross-section dependencies was introduced for improving the representation of cross-section variations. The added benefit was that in the process of studying and improving the coupled multi-physics methodology more insight was gained into the physics and dynamics of PBMR, which will help also to optimize the PBMR design and improve its safety. One unique contribution of the PhD research is the investigation of the importance of the correct representation of the three-dimensional (3-D) effects in the PBMR analysis. The performed studies demonstrated that explicit 3-D modeling of control rod movement is superior and removes the errors associated with the grey curtain (2-D homogenized) approximation.

77 FR 74196 - Draft Guidance for Industry on Safety Considerations for Product Design To Minimize Medication...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-13

... document, which addresses safety achieved through drug product design, is the first in a series of planned...] Draft Guidance for Industry on Safety Considerations for Product Design To Minimize Medication Errors... Considerations for Product Design to Minimize Medication Errors.'' The draft guidance provides sponsors of...

46 CFR 177.340 - Alternate design considerations.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 7 2014-10-01 2014-10-01 false Alternate design considerations. 177.340 Section 177.340 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) SMALL PASSENGER VESSELS (UNDER 100 GROSS TONS) CONSTRUCTION AND ARRANGEMENT Hull Structure § 177.340 Alternate design considerations. When the structure of vessel is of novel design,...

46 CFR 177.340 - Alternate design considerations.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 46 Shipping 7 2012-10-01 2012-10-01 false Alternate design considerations. 177.340 Section 177.340 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) SMALL PASSENGER VESSELS (UNDER 100 GROSS TONS) CONSTRUCTION AND ARRANGEMENT Hull Structure § 177.340 Alternate design considerations. When the structure of vessel is of novel design,...

46 CFR 177.340 - Alternate design considerations.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 46 Shipping 7 2013-10-01 2013-10-01 false Alternate design considerations. 177.340 Section 177.340 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) SMALL PASSENGER VESSELS (UNDER 100 GROSS TONS) CONSTRUCTION AND ARRANGEMENT Hull Structure § 177.340 Alternate design considerations. When the structure of vessel is of novel design,...

Physical activity in Arab women in Southern California.

PubMed

Qahoush, Rafat; Stotts, Nancy; Alawneh, Manal S; Froelicher, Erika Sivarajan

2010-12-01

The limited research of Arab women suggests that most are sedentary. Given the known health benefits of physical activity suggests that the study of physical activity of women in Southern California where the climate favors year round outdoor activities is warranted. To describe Arab women's cardiovascular risk factors (CVD): physical activity levels, self-efficacy, and determinants of physical inactivity and their preferences for physical activity programs. This cross-sectional design used the International Physical Activity Questionnaire (IPAQ), Exercise Self-Efficacy Scale, Choose to Move Questionnaire, and "How America Measures Up" Questionnaire. The mean age of the 180 women was 37.6 (±12.9). Most (91.1%) had ≥high school education, 68.9% were married, and 24.4% were below poverty level. CVD risk factors were: hypertension 20.6%; hyperlipidemia 21.1%; diabetes 10%; and excess weight in 60%. Their self-efficacy scores were 39.2 (±18.2); and 46.2% were sedentary. A logistic regressions analysis found statistically significant determinant(s) for physical inactivity performance were low self-efficacy score and "not being born in the U.S." These young Arab women are considerably physically inactive and overweight. The findings from our study can guide culturally relevant health promotion programs in Arab women who have unique needs and preferences. Copyright © 2010 European Society of Cardiology. Published by Elsevier B.V. All rights reserved.

The pseudo-symmetric optimization of the National Compact Stellarator Experiment

DOE Office of Scientific and Technical Information (OSTI.GOV)

Isaev, M.Y.; Mikhailov, M.I.; Monticello, D.A.

1999-08-01

A new experiment, the National Compact Stellarator Experiment (NCSX) [Monticello {ital et al.} {open_quotes}Physics Consideration for the Design of NCSX,{close_quotes} {ital Proceedings of 25th EPS Conference on Controlled Fusion and Plasma Physics, Prague, 1998} (European Physical Society, Petit-Lancy), paper 1.187], hopes to overcome the deleterious ripple transport usually associated with stellarators by creating a quasi-axisymmetric configuration. A quasi-axisymmetric configuration is one in which the Fourier spectrum of the magnetic field strength in so-called Boozer coordinates is dominated by the toroidal angle averaged (n=0) components. In this article the concept of pseudosymmetry is used to improve ripple transport in a four-periodmore » variant of NCSX. By definition, pseudosymmetric magnetic configurations have no locally trapped particles. To obtain a pseudosymmetric configuration, different target functions are considered. It is found that a target function equal to the area of ripple of the magnetic field magnitude along the field line is very effective in reducing the neoclassical transport coefficient. {copyright} {ital 1999 American Institute of Physics.}« less

Relationships between self-reported physical and mental health and intelligence performance across adulthood.

PubMed

Perlmutter, M; Nyquist, L

1990-07-01

One hundred and twenty-seven adults between 20 and 90 years of age were tested on the Wechsler Adult Intelligence Scale for their digit span memory (forward and backward), fluid intelligence (block design and digit symbol), and crystallized intelligence (vocabulary and information), as well as assessed for self-reported health (Cornell Medical Index, Zung Depression Scale, health habits, and self-ratings of physical and mental health). As expected, across the entire age range there was no correlation between age and digit span memory (r = .03), a strong negative correlation between age and fluid intelligence (r = -.78), and a modest positive correlation between age and crystallized intelligence (r = .27). In addition, older adults reported more physical (r = .36) and mental (r = .32) health problems than did younger adults. Of special interest was the finding that both self-reported physical and mental health accounted for significant variance in intelligence performance, particularly in older adults. Moreover, self-reported health accounted for a considerable portion of observed variance, even when age differences in self-reported health were statistically controlled.

Physics objectives of PI3 spherical tokamak program

NASA Astrophysics Data System (ADS)

Howard, Stephen; Laberge, Michel; Reynolds, Meritt; O'Shea, Peter; Ivanov, Russ; Young, William; Carle, Patrick; Froese, Aaron; Epp, Kelly

2017-10-01

Achieving net energy gain with a Magnetized Target Fusion (MTF) system requires the initial plasma state to satisfy a set of performance goals, such as particle inventory (1021 ions), sufficient magnetic flux (0.3 Wb) to confine the plasma without MHD instability, and initial energy confinement time several times longer than the compression time. General Fusion (GF) is now constructing Plasma Injector 3 (PI3) to explore the physics of reactor-scale plasmas. Energy considerations lead us to design around an initial state of Rvessel = 1 m. PI3 will use fast coaxial helicity injection via a Marshall gun to create a spherical tokamak plasma, with no additional heating. MTF requires solenoid-free startup with no vertical field coils, and will rely on flux conservation by a metal wall. PI3 is 5x larger than SPECTOR so is expected to yield magnetic lifetime increase of 25x, while peak temperature of PI3 is expected to be similar (400-500 eV) Physics investigations will study MHD activity and the resistive and convective evolution of current, temperature and density profiles. We seek to understand the confinement physics, radiative loss, thermal and particle transport, recycling and edge physics of PI3.

Trait self-esteem and claimed self-handicapping motives in sports situations.

PubMed

Finez, Lucie; Berjot, Sophie; Rosnet, Elisabeth; Cleveland, Christena; Tice, Dianne M

2012-12-01

We examined the relationship between physical self-esteem and claimed self-handicapping among athletes by taking motives into consideration. In Study 1, 99 athletes were asked to report their tendency to engage in claimed self-handicapping for self-protective and self-enhancement motives (trait measures). Low self-esteem athletes reported a higher tendency to engage in claimed self-handicapping for these two motives compared with high self-esteem athletes. Neither low nor high self-esteem athletes reported a preference for one motive over the other. In Study 2, 107 athletes participated in a test that was ostensibly designed to assess high physical abilities - and thus to encourage self-handicapping for self-enhancement motives (success-meaningful condition) - or to assess low physical abilities, and thus to encourage self-handicapping for self-protective motives (failure-meaningful condition). Before starting the test, athletes were given the opportunity to claim handicaps that could impair their performance. Low self-esteem athletes claimed more handicaps than high self-esteem athletes in both conditions. Findings suggest that low physical self-esteem athletes engage more in claimed handicapping regardless of motives, relative to high physical self-esteem athletes.

Behavioral, normative and control beliefs underlying low-fat dietary and regular physical activity behaviors for adults diagnosed with type 2 diabetes and/or cardiovascular disease.

PubMed

White, Katherine M; Terry, Deborah J; Troup, Carolyn; Rempel, Lynn A

2007-08-01

Promoting healthy lifestyle behaviors is an important aspect of interventions designed to improve the management of chronic diseases such as Type 2 diabetes and cardiovascular disease. The present study used Ajzen's (1991) theory of planned behavior as a framework to examine beliefs amongst adults diagnosed with these conditions who do and do not engage in low-fat dietary and regular physical activity behaviors. Participants (N = 192) completed a questionnaire assessing their behavioral, normative and control beliefs in relation to regular, moderate physical activity and eating foods low in saturated fats. Measures of self-reported behavior were also examined. The findings revealed that, in general, it is the underlying behavioral beliefs that are important determinants for both physical activity and low-fat food consumption with some evidence to suggest that pressure from significant others is an important consideration for low-fat food consumption. Laziness, as a barrier to engaging in physical activity, also emerged as an important factor. To encourage a healthy lifestyle amongst this population, interventions should address the perceived costs associated with behavioral performance and encourage people to maintain healthy behaviors in light of these costs.

Cyber-physical networking for wireless mesh infrastructures

NASA Astrophysics Data System (ADS)

Mannweiler, C.; Lottermann, C.; Klein, A.; Schneider, J.; Schotten, H. D.

2012-09-01

This paper presents a novel approach for cyber-physical network control. "Cyber-physical" refers to the inclusion of different parameters and information sources, ranging from physical sensors (e.g. energy, temperature, light) to conventional network information (bandwidth, delay, jitter, etc.) to logical data providers (inference systems, user profiles, spectrum usage databases). For a consistent processing, collected data is represented in a uniform way, analyzed, and provided to dedicated network management functions and network services, both internally and, through an according API, to third party services. Specifically, in this work, we outline the design of sophisticated energy management functionalities for a hybrid wireless mesh network (WLAN for both backhaul traffic and access, GSM for access only), disposing of autonomous energy supply, in this case solar power. Energy consumption is optimized under the presumption of fluctuating power availability and considerable storage constraints, thus influencing, among others, handover and routing decisions. Moreover, advanced situation-aware auto-configuration and self-adaptation mechanisms are introduced for an autonomous operation of the network. The overall objective is to deploy a robust wireless access and backbone infrastructure with minimal operational cost and effective, cyber-physical control mechanisms, especially dedicated for rural or developing regions.

Nonlinear rocket motor stability prediction: Limit amplitude, triggering, and mean pressure shifta)

NASA Astrophysics Data System (ADS)

Flandro, Gary A.; Fischbach, Sean R.; Majdalani, Joseph

2007-09-01

High-amplitude pressure oscillations in solid propellant rocket motor combustion chambers display nonlinear effects including: (1) limit cycle behavior in which the fluctuations may dwell for a considerable period of time near their peak amplitude, (2) elevated mean chamber pressure (DC shift), and (3) a triggering amplitude above which pulsing will cause an apparently stable system to transition to violent oscillations. Along with the obvious undesirable vibrations, these features constitute the most damaging impact of combustion instability on system reliability and structural integrity. The physical mechanisms behind these phenomena and their relationship to motor geometry and physical parameters must, therefore, be fully understood if instability is to be avoided in the design process, or if effective corrective measures must be devised during system development. Predictive algorithms now in use have limited ability to characterize the actual time evolution of the oscillations, and they do not supply the motor designer with information regarding peak amplitudes or the associated critical triggering amplitudes. A pivotal missing element is the ability to predict the mean pressure shift; clearly, the designer requires information regarding the maximum chamber pressure that might be experienced during motor operation. In this paper, a comprehensive nonlinear combustion instability model is described that supplies vital information. The central role played by steep-fronted waves is emphasized. The resulting algorithm provides both detailed physical models of nonlinear instability phenomena and the critically needed predictive capability. In particular, the origin of the DC shift is revealed.

Human subjects concerns in ground based ECLSS testing - Managing uncertainty in closely recycled systems

NASA Technical Reports Server (NTRS)

Crump, William J.; Janik, Daniel S.; Thomas, L. Dale

1990-01-01

U.S. space missions have to this point used water either made on board or carried from earth and discarded after use. For Space Station Freedom, long duration life support will include air and water recycling using a series of physical-chemical subsystems. The Environmental Control and Life Support System (ECLSS) designed for this application must be tested extensively at all stages of hardware maturity. Human test subjects are required to conduct some of these tests, and the risks associated with the use of development hardware must be addressed. Federal guidelines for protection of human subjects require careful consideration of risks and potential benefits by an Institutional Review Board (IRB) before and during testing. This paper reviews the ethical principles guiding this consideration, details the problems and uncertainties inherent in current hardware testing, and presents an incremental approach to risk assessment for ECLSS testing.

The free energy landscape of small peptides as obtained from metadynamics with umbrella sampling corrections

PubMed Central

Babin, Volodymyr; Roland, Christopher; Darden, Thomas A.; Sagui, Celeste

2007-01-01

There is considerable interest in developing methodologies for the accurate evaluation of free energies, especially in the context of biomolecular simulations. Here, we report on a reexamination of the recently developed metadynamics method, which is explicitly designed to probe “rare events” and areas of phase space that are typically difficult to access with a molecular dynamics simulation. Specifically, we show that the accuracy of the free energy landscape calculated with the metadynamics method may be considerably improved when combined with umbrella sampling techniques. As test cases, we have studied the folding free energy landscape of two prototypical peptides: Ace-(Gly)2-Pro-(Gly)3-Nme in vacuo and trialanine solvated by both implicit and explicit water. The method has been implemented in the classical biomolecular code AMBER and is to be distributed in the next scheduled release of the code. © 2006 American Institute of Physics. PMID:17144742

Laboratory studies on the excitation and collisional deactivation of metastable atoms and molecules in the aurora and airglow

NASA Technical Reports Server (NTRS)

Zipf, E. C.

1974-01-01

The aeronomy group at the University of Pittsburgh is actively engaged in a series of coordinated satellite, sounding rocket, and laboratory studies designed to expand and clarify knowledge of the physics and chemistry of planetary atmospheres. Three major discoveries have been made that will lead ultimately to a complete and dramatic revision of our ideas on the ionospheres of Mars, Venus, and the Earth and on the origin of their vacuum ultraviolet airglows. The results have already suggested a new generation of ionosphere studies which probably can be carried out best by laser heterodyning techniques. Laboratory studies have also identified, for the first time, the physical mechanism responsible for the remarkable nitric oxide buildup observed in some auroral arcs. This development is an important break-through in auroral physics, and has military ramifications of considerable interest to the Department of Defense. This work may also shed some light on related NO and atomic nitrogen problems in the mesosphere.

Problematic Internet use and physical health.

PubMed

Kelley, Kevin J; Gruber, Elon M

2013-06-01

Background and aims A considerable body of literature has emerged over the past two decades assessing the relationship between problematic or addictive use of the Internet and various indices of psychological well-being. Conversely, comparatively little research has assessed the relationship between problematic or addictive use of the Internet and one's physical health. Method The current study assesses this relationship using a sample of college students (N = 133) who responded online to two questionnaires: the Problematic Internet Use Questionnaire (PIUQ; Demetrovics, Szeredi&Rózsa, 2008) and the SF-36v2 Health Survey (Ware et al., 2008). Results The findings indicate that problematic Internet use is associated with poorer physical health. These results are consistent with other data that assessed the relationship between these two variables. Furthermore, this relationship supersedes the influence of the number of hours spent online per day. Conclusions The findings are discussed in terms of the limitations of the study design and conclusions that can be drawn from this preliminary empirical effort.

Mathematical modeling of the infrastructure of attosecond actuators and femtosecond sensors of nonequilibrium physical media in smart materials

NASA Astrophysics Data System (ADS)

Beznosyuk, Sergey A.; Maslova, Olga A.; Zhukovsky, Mark S.; Valeryeva, Ekaterina V.; Terentyeva, Yulia V.

2017-12-01

The task of modeling the multiscale infrastructure of quantum attosecond actuators and femtosecond sensors of nonequilibrium physical media in smart materials is considered. Computer design and calculation of supra-atomic femtosecond sensors of nonequilibrium physical media in materials based on layered graphene-transition metal nanosystems are carried out by vdW-DF and B3LYP methods. It is shown that the molybdenum substrate provides fixation of graphene nanosheets by Van der Waals forces at a considerable distance (5.3 Å) from the metal surface. This minimizes the effect of the electronic and nuclear subsystem of the substrate metal on the sensory properties of "pure" graphene. The conclusion is substantiated that graphene-molybdenum nanosensors are able to accurately orient and position one molecule of carbon monoxide. It is shown that graphene selectively adsorbs CO and fixes the oxygen atom of the molecule at the position of the center of the graphene ring C6.

Implementation of virtual models from sheet metal forming simulation into physical 3D colour models using 3D printing

NASA Astrophysics Data System (ADS)

Junk, S.

2016-08-01

Today the methods of numerical simulation of sheet metal forming offer a great diversity of possibilities for optimization in product development and in process design. However, the results from simulation are only available as virtual models. Because there are any forming tools available during the early stages of product development, physical models that could serve to represent the virtual results are therefore lacking. Physical 3D-models can be created using 3D-printing and serve as an illustration and present a better understanding of the simulation results. In this way, the results from the simulation can be made more “comprehensible” within a development team. This paper presents the possibilities of 3D-colour printing with particular consideration of the requirements regarding the implementation of sheet metal forming simulation. Using concrete examples of sheet metal forming, the manufacturing of 3D colour models will be expounded upon on the basis of simulation results.

Novel index for micromixing characterization and comparative analysis

PubMed Central

Jain, Mranal; Nandakumar, K.

2010-01-01

The most basic micromixer is a T- or Y-mixer, where two confluent streams mix due to transverse diffusion. To enhance micromixing, various modifications of T-mixers are reported such as heterogeneously charged walls, grooves on the channel base, geometric variations by introducing physical constrictions, etc. The performance of these reported designs is evaluated against the T-mixer in terms of the deviation from perfectly mixed state and mixing length (device length required to achieve perfect mixing). Although many studies have noticed the reduced flow rates for improved mixer designs, the residence time is not taken into consideration for micromixing performance evaluation. In this work, we propose a novel index, based on residence time, for micromixing characterization and comparative analysis. For any given mixer, the proposed index identifies the nondiffusive mixing enhancement with respect to the T-mixer. Various micromixers are evaluated using the proposed index to demonstrate the usefulness of the index. It is also shown that physical constriction mixer types are equivalent to T-mixers. The proposed index is found to be insightful and could be used as a benchmark for comparing different mixing strategies. PMID:20689773

Common Problems with Pyrometry at Shock Physics Experiments and How to Avoid Them

NASA Astrophysics Data System (ADS)

Seifter, Achim; Obst, Andrew; Holtkamp, David

2007-06-01

Temperature is not only one of the most prominent parameters in shock physics experiments but also very hard to determine experimentally. Only a few techniques are available because of difficulties due to the short timescale and often very low temperatures. Pyrometry is the most portable of these techniques but has to deal with some problems which give rise to uncertainties. Only if the experiment is designed very carefully some of these difficulties like background radiation from high explosive burn products, muzzle flash or laser light can be avoided. Other problems like spatial temperature non-uniformities or thermal radiation from a transparent anvil are inherent to the experiment and cannot be avoided. By choosing the proper spectral range covered by the pyrometer and fitting the obtained spectral radiance traces with appropriate models meaningful results can be obtained. In this paper we will describe the most important points to be taken into account when designing the experiment, present considerations for choosing the wavelength range of the pyrometer and show data where spatial non uniformities or radiation from hot anvils occurred and temperature data could still be obtained.

Cavity control as a new quantum algorithms implementation treatment

NASA Astrophysics Data System (ADS)

AbuGhanem, M.; Homid, A. H.; Abdel-Aty, M.

2018-02-01

Based on recent experiments [ Nature 449, 438 (2007) and Nature Physics 6, 777 (2010)], a new approach for realizing quantum gates for the design of quantum algorithms was developed. Accordingly, the operation times of such gates while functioning in algorithm applications depend on the number of photons present in their resonant cavities. Multi-qubit algorithms can be realized in systems in which the photon number is increased slightly over the qubit number. In addition, the time required for operation is considerably less than the dephasing and relaxation times of the systems. The contextual use of the photon number as a main control in the realization of any algorithm was demonstrated. The results indicate the possibility of a full integration into the realization of multi-qubit multiphoton states and its application in algorithm designs. Furthermore, this approach will lead to a successful implementation of these designs in future experiments.

Fitness attenuates the prevalence of increased coronary artery calcium in individuals with metabolic syndrome.

PubMed

Ekblom-Bak, Elin; Ekblom, Örjan; Fagman, Erika; Angerås, Oskar; Schmidt, Caroline; Rosengren, Annika; Börjesson, Mats; Bergström, Göran

2018-02-01

Background The association between cardiorespiratory fitness, physical activity and coronary artery calcium (CAC) is unclear, and whether higher levels of fitness attenuate CAC prevalence in subjects with metabolic syndrome is not fully elucidated. The present study aims to: a) investigate the independent association of fitness on the prevalence of CAC, after adjustment for moderate-to-vigorous physical activity and sedentary time, and b) study the possible attenuation of increased CAC by higher fitness, in participants with metabolic syndrome. Design Cross-sectional. Methods In total 678 participants (52% women), 50-65 years old, from the SCAPIS pilot study were included. Fitness (VO 2 max) was estimated by submaximal cycle ergometer test and moderate-to-vigorous physical activity and sedentary time were assessed using hip-worn accelerometers. CAC score (CACS) was quantified using the Agatston score. Results The odds of having a significant CACS (≥100) was half in participants with moderate/high fitness compared with their low fitness counterparts. Further consideration of moderate-to-vigorous physical activity, sedentary time and number of components of the metabolic syndrome did only slightly alter the effect size. Those with metabolic syndrome had 47% higher odds for significant CAC compared with those without metabolic syndrome. However, moderate/high fitness seems to partially attenuate this risk, as further joint analysis indicated an increased odds for having significant CAC only in the unfit metabolic syndrome participants. Conclusions Being fit is associated with a reduced risk of having significant CAC in individuals with metabolic syndrome. While still very much underutilized, fitness should be taken into consideration in everyday clinical risk prediction in addition to the traditional risk factors of the metabolic syndrome.

Recreational physical activity and the risk of preeclampsia: a prospective cohort of Norwegian women.

PubMed

Magnus, Per; Trogstad, Lill; Owe, Katrine M; Olsen, Sjurdur F; Nystad, Wenche

2008-10-15

Previous case-control studies suggest that recreational physical activity protects against preeclampsia. Using a prospective design, the authors estimated the risk of preeclampsia for pregnant women according to level of physical activity, taking other variables that influence risk into consideration. The data set comprised 59,573 pregnancies from the Norwegian Mother and Child Cohort Study (1999-2006). Information on physical activity and other exposures was extracted from questionnaire responses given in pregnancy weeks 14-22, whereas diagnosis of preeclampsia was retrieved from the Medical Birth Registry of Norway. Estimation and confounder control was performed with multiple logistic regression. About 24% of pregnant women reported no physical activity, and 7% reported more than 25 such activities per month. The adjusted odds ratio was 0.79 (95% confidence interval: 0.65, 0.96) for preeclampsia when comparing women who exercised 25 times or more per month with inactive women. The association appeared strongest among women whose body mass index was less than 25 kg/m(2) and was absent among women whose body mass index was higher than 30 kg/m(2). These results suggest that the preventive effect of recreational physical activity during pregnancy may be more limited than has been shown in case-control studies and may apply to nonobese women only.

Recreational Physical Activity and the Risk of Preeclampsia: A Prospective Cohort of Norwegian Women

PubMed Central

Trogstad, Lill; Owe, Katrine M.; Olsen, Sjurdur F.; Nystad, Wenche

2008-01-01

Previous case-control studies suggest that recreational physical activity protects against preeclampsia. Using a prospective design, the authors estimated the risk of preeclampsia for pregnant women according to level of physical activity, taking other variables that influence risk into consideration. The data set comprised 59,573 pregnancies from the Norwegian Mother and Child Cohort Study (1999–2006). Information on physical activity and other exposures was extracted from questionnaire responses given in pregnancy weeks 14–22, whereas diagnosis of preeclampsia was retrieved from the Medical Birth Registry of Norway. Estimation and confounder control was performed with multiple logistic regression. About 24% of pregnant women reported no physical activity, and 7% reported more than 25 such activities per month. The adjusted odds ratio was 0.79 (95% confidence interval: 0.65, 0.96) for preeclampsia when comparing women who exercised 25 times or more per month with inactive women. The association appeared strongest among women whose body mass index was less than 25 kg/m2 and was absent among women whose body mass index was higher than 30 kg/m2. These results suggest that the preventive effect of recreational physical activity during pregnancy may be more limited than has been shown in case-control studies and may apply to nonobese women only. PMID:18701444

Barriers to undergraduate peer-physical examination of the lower limb in the health sciences and strategies to improve inclusion: a review.

PubMed

Hendry, Gordon James

2013-10-01

Peer-physical examination is a widely adopted and an integral component of the undergraduate curriculum for many health science programs. Unwillingness or perceived inability to participate in peer-physical examination classes may have a negative impact upon students' abilities to competently conduct physical examinations of patients in future as registered health professionals. A literature review on the perceptions and attitudes of peer-physical examination of the lower limb amongst medical and health science students was conducted to identify potential barriers to participation, and to review strategies to improve participation in classes designed to develop clinical examination skills. A pragmatic search strategy of the literature from PubMed and Google Scholar published prior to June 2012 yielded 23 relevant articles. All articles were concerned with the views of medical students' education and there were no articles explicitly addressing the role of peer-physical examination in health science disciplines. Several ethical issues were identified including feelings of coercion, embarrassment, and perceptions of a lack of consideration for cultural and religious beliefs. The available evidence suggests that barriers to participation may be overcome by implementing standard protocols concerned with obtaining informed written consent, adequate choice of peer-examiner, changing facilities and garment advice, and possible alternative learning methods.

Designing an operator interface? Consider user`s `psychology`

DOE Office of Scientific and Technical Information (OSTI.GOV)

Toffer, D.E.

The modern operator interface is a channel of communication between operators and the plant that, ideally, provides them with information necessary to keep the plant running at maximum efficiency. Advances in automation technology have increased information flow from the field to the screen. New and improved Supervisory Control and Data Acquisition (SCADA) packages provide designers with powerful and open design considerations. All too often, however, systems go to the field designed for the software rather than the operator. Plant operators` jobs have changed fundamentally, from controlling their plants from out in the field to doing so from within control rooms.more » Control room-based operation does not denote idleness. Trained operators should be engaged in examination of plant status and cognitive evaluation of plant efficiencies. Designers who are extremely computer literate, often do not consider demographics of field operators. Many field operators have little knowledge of modern computer systems. As a result, they do not take full advantage of the interface`s capabilities. Designers often fail to understand the true nature of how operators run their plants. To aid field operators, designers must provide familiar controls and intuitive choices. To achieve success in interface design, it is necessary to understand the ways in which humans think conceptually, and to understand how they process this information physically. The physical and the conceptual are closely related when working with any type of interface. Designers should ask themselves: {open_quotes}What type of information is useful to the field operator?{close_quotes} Let`s explore an integration model that contains the following key elements: (1) Easily navigated menus; (2) Reduced chances for misunderstanding; (3) Accurate representations of the plant or operation; (4) Consistent and predictable operation; (5) A pleasant and engaging interface that conforms to the operator`s expectations. 4 figs.« less

Physics of negative absolute temperatures.

PubMed

Abraham, Eitan; Penrose, Oliver

2017-01-01

Negative absolute temperatures were introduced into experimental physics by Purcell and Pound, who successfully applied this concept to nuclear spins; nevertheless, the concept has proved controversial: a recent article aroused considerable interest by its claim, based on a classical entropy formula (the "volume entropy") due to Gibbs, that negative temperatures violated basic principles of statistical thermodynamics. Here we give a thermodynamic analysis that confirms the negative-temperature interpretation of the Purcell-Pound experiments. We also examine the principal arguments that have been advanced against the negative temperature concept; we find that these arguments are not logically compelling, and moreover that the underlying "volume" entropy formula leads to predictions inconsistent with existing experimental results on nuclear spins. We conclude that, despite the counterarguments, negative absolute temperatures make good theoretical sense and did occur in the experiments designed to produce them.

Basic targeting strategies for rendezvous and flyby missions to the near-Earth asteroids

NASA Astrophysics Data System (ADS)

Perozzi, Ettore; Rossi, Alessandro; Valsecchi, Giovanni B.

2001-01-01

Missions to asteroids and comets are becoming increasingly feasible both from a technical and a financial point of view. In particular, those directed towards the Near-Earth Asteroids have proven suitable for a low-cost approach, thus attracting the major space agencies as well as private companies. The choice of a suitable target involves both scientific relevance and mission design considerations, being often a difficult task to accomplish due to the limited energy budget at disposal. The aim of this paper is to provide an approach to basic trajectory design which allows to account for both aspects of the problem, taking into account scientific and technical information. A global characterization of the Near-Earth Asteroids population carried out on the basis of their dynamics, physical properties and flight dynamics considerations, allows to identify a group of candidates which satisfy both, the scientific and engineering requirements. The feasibility of rendezvous and flyby missions towards them is then discussed and the possibility of repeated encounters with the same object is investigated, as an intermediate scenario. Within this framework, the capability of present and near future launch and propulsion systems for interplanetary missions is also addressed.

Design and manufacture of imaging time-of-propagation optics

NASA Astrophysics Data System (ADS)

Albrecht, Mike; Fast, James; Schwartz, Alan

2016-09-01

There are several challenges associated with the design and manufacture of the optics required for the imaging time-of- propagation detector constructed for the Belle II particle physics experiment. This detector uses Cherenkov light radiated in quartz bars to identify subatomic particles: pions, kaons, and protons. The optics are physically large (125 cm x 45 cm x 2 cm bars and 45 cm x 10 cm x 5 cm prisms), all surfaces are optically polished, and there is very little allowance for chamfers or surface defects. In addition to the optical challenges, there are several logistical and handling challenges associated with measuring, assembling, cleaning, packaging, and shipping these delicate precision optics. This paper describes a collaborative effort between Pacific Northwest National Laboratory, the University of Cincinnati, and ZYGO Corporation for the design and manufacture of 48 fused silica optics (30 bars and 18 prisms) for the iTOP Detector. Details of the iTOP detector design that drove the challenging optical requirements are provided, along with material selection considerations. Since the optics are so large, precise, and delicate, special care had to be given to the selection of a manufacturing process capable of achieving the challenging optical and surface defect requirements on such large and high-aspect-ratio (66:1) components. A brief update on the current status and performance of these optics is also provided.

The need for ergonomics considerations for the design and development of agricultural machinery in Thailand.

PubMed

Mamansari, D U; Salokhe, V M

1995-06-01

Agriculture plays an important role in developing countries which are mainly located in tropical regions. Agriculture is an industry with tremendous opportunities for the application of ergonomics principles. Working conditions are extremely difficult due to severe environmental conditions, long working hours, strenuous work and the use of mobile equipment. The ignorance of the majority of ergonomics principles in the design of agricultural equipment make the conditions more difficult. Thailand is one of the important suppliers of agricultural products in the world. Mechanization has expanded tremendously during the last 10 years and the number of agricultural machinery has rapidly increased. This paper looks at ergonomics principles which must be considered in the design and development of agricultural machines and equipment used in Thailand. It was identified that the common farming system in Thailand is rice-based cultivation, mostly in swampy conditions with heavy clay soil. It was also found that the most energy-consuming task in agriculture was primary cultivation. The most widely used machine is a power tiller which is suitable for the farm sizes available and can be operated easily. Most of the power tillers and other equipment were found to be locally made, with less than 5% imported. Unfortunately, there was no standardization in power tiller manufacturing which led to increasing farmers' strain. There is still a need to collect more ergonomics data of Thai farmers such as anthropometry, strength and physical work capacity for the design and development of agricultural machines and equipment used in Thailand. Different ergonomic consideration for the design and development of agricultural machinery have been suggested.

The Intuitive Physics of the Equilibrium of the Lever and of the Hydraulic Pressures: Implications for the Teaching of Elementary Physics

ERIC Educational Resources Information Center

Masin, Sergio Cesare; Crivellaro, Francesco; Varotto, Diego

2014-01-01

The research field of intuitive physics focuses on discrepancies between theoretical and intuitive physical knowledge. Consideration of these discrepancies can help in the teaching of elementary physics. However, evidence shows that theoretical and intuitive physical knowledge may also be congruent. Physics teaching could further benefit from…

Considerations for Explosively Driven Conical Shock Tube Design: Computations and Experiments

DTIC Science & Technology

2017-02-16

ARL-TR-7953 ● FEB 2017 US Army Research Laboratory Considerations for Explosively Driven Conical Shock Tube Design : Computations...The findings in this report are not to be construed as an official Department of the Army position unless so designated by other authorized...Considerations for Explosively Driven Conical Shock Tube Designs : Computations and Experiments by Joel B Stewart Weapons and Materials Research Directorate

A comparative study of patients' activities and interactions in a stroke unit before and after reconstruction-The significance of the built environment.

PubMed

Anåker, Anna; von Koch, Lena; Sjöstrand, Christina; Bernhardt, Julie; Elf, Marie

2017-01-01

Early mobilization and rehabilitation, multidisciplinary stroke expertise and comprehensive therapies are fundamental in a stroke unit. To achieve effective and safe stroke care, the physical environment in modern stroke units should facilitate the delivery of evidence-based care. Therefore, the purpose of this study was to explore patients' activities and interactions in a stroke unit before the reconstruction of the physical environment, while in a temporary location and after reconstruction. This case study examined a stroke unit as an integrated whole. The data were collected using a behavioral mapping technique at three different time points: in the original unit, in the temporary unit and in the new unit. A total of 59 patients were included. The analysis included field notes from observations of the physical environment and examples from planning and design documents. The findings indicated that in the new unit, the patients spent more time in their rooms, were less active, and had fewer interactions with staff and family than the patients in the original unit. The reconstruction involved a change from a primarily multi-bed room design to single-room accommodations. In the new unit, the patients' lounge was located in a far corner of the unit with a smaller entrance than the patients' lounge in the old unit, which was located at the end of a corridor with a noticeable entrance. Changes in the design of the stroke unit may have influenced the patients' activities and interactions. This study raises the question of how the physical environment should be designed in the future to facilitate the delivery of health care and improve outcomes for stroke patients. This research is based on a case study, and although the results should be interpreted with caution, we strongly recommend that environmental considerations be included in future stroke guidelines.

Encouraging choice, serendipity and experimentation: experiences from Griffith University library (G11) extension and Gumurrii Centre.

PubMed

Legerton, Graham

2013-09-01

The refurbishment and extension of existing university buildings is a critical consideration for many universities. This article details an architect's perspective of an innovative and collaborative design approach to transforming an existing library into a futuristic and student-centric interactive learning environment. The design is responsive to people, place, the community and the environment, due, in part, to the enhanced physical permeability of the building. Associated user-group forums comprised the end user client, the university's facilities body, the builder, lead architectural consultants, the Centre for Indigenous Students (Gumurrii Centre) and architectural sub-consultants. This article discusses five key design moves--"triangulate", "unique geometries and spaces", "learning aviary", "sky lounge" and "understanding flexibility". It goes on to discuss these elements in relation to designing spaces to enhance interprofessional education and collaboration. In summary, this article identifies how it is possible to maximise the value and characteristics of an existing library whilst creating a series of innovative spaces that offer choice, encourage serendipity and embrace experimentation.

Definition of avionics concepts for a heavy lift cargo vehicle, volume 2

NASA Technical Reports Server (NTRS)

1989-01-01

A cost effective, multiuser simulation, test, and demonstration facility to support the development of avionics systems for future space vehicles is defined. The technology needs and requirements of future Heavy Lift Cargo Vehicles (HLCVs) are analyzed and serve as the basis for sizing of the avionics facility although the lab is not limited in use to support of HLCVs. Volume 2 is the technical volume and provides the results of the vehicle avionics trade studies, the avionics lab objectives, the lab's functional requirements and design, physical facility considerations, and a summary cost estimate.

Core plasma design of the compact helical reactor with a consideration of the equipartition effect

NASA Astrophysics Data System (ADS)

Goto, T.; Miyazawa, J.; Yanagi, N.; Tamura, H.; Tanaka, T.; Sakamoto, R.; Suzuki, C.; Seki, R.; Satake, S.; Nunami, M.; Yokoyama, M.; Sagara, A.; the FFHR Design Group

2018-07-01

Integrated physics analysis of plasma operation scenario of the compact helical reactor FFHR-c1 has been conducted. The DPE method, which predicts radial profiles in a reactor by direct extrapolation from the reference experimental data, has been extended to implement the equipartition effect. Close investigation of the plasma operation regime has been conducted and a candidate plasma operation point of FFHR-c1 has been identified within the parameter regime that has already been confirmed in LHD experiment in view of MHD equilibrium, MHD stability and neoclassical transport.

Wave-Optics Analysis of Pupil Imaging

NASA Technical Reports Server (NTRS)

Dean, Bruce H.; Bos, Brent J.

2006-01-01

Pupil imaging performance is analyzed from the perspective of physical optics. A multi-plane diffraction model is constructed by propagating the scalar electromagnetic field, surface by surface, along the optical path comprising the pupil imaging optical system. Modeling results are compared with pupil images collected in the laboratory. The experimental setup, although generic for pupil imaging systems in general, has application to the James Webb Space Telescope (JWST) optical system characterization where the pupil images are used as a constraint to the wavefront sensing and control process. Practical design considerations follow from the diffraction modeling which are discussed in the context of the JWST Observatory.

Reasoning with alternative explanations in physics: The cognitive accessibility rule

NASA Astrophysics Data System (ADS)

Heckler, Andrew F.; Bogdan, Abigail M.

2018-06-01

A critical component of scientific reasoning is the consideration of alternative explanations. Recognizing that decades of cognitive psychology research have demonstrated that relative cognitive accessibility, or "what comes to mind," strongly affects how people reason in a given context, we articulate a simple "cognitive accessibility rule", namely that alternative explanations are considered less frequently when an explanation with relatively high accessibility is offered first. In a series of four experiments, we test the cognitive accessibility rule in the context of consideration of alternative explanations for six physical scenarios commonly found in introductory physics curricula. First, we administer free recall and recognition tasks to operationally establish and distinguish between the relative accessibility and availability of common explanations for the physical scenarios. Then, we offer either high or low accessibility explanations for the physical scenarios and determine the extent to which students consider alternatives to the given explanations. We find two main results consistent across algebra- and calculus-based university level introductory physics students for multiple answer formats. First, we find evidence that, at least for some contexts, most explanatory factors are cognitively available to students but not cognitively accessible. Second, we empirically verify the cognitive accessibility rule and demonstrate that the rule is strongly predictive, accounting for up to 70% of the variance of the average student consideration of alternative explanations across scenarios. Overall, we find that cognitive accessibility can help to explain biases in the consideration of alternatives in reasoning about simple physical scenarios, and these findings lend support to the growing number of science education studies demonstrating that tasks relevant to science education curricula often involve rapid, automatic, and potentially predictable processes and outcomes.

Measurements and TCAD simulation of novel ATLAS planar pixel detector structures for the HL-LHC upgrade

NASA Astrophysics Data System (ADS)

Nellist, C.; Dinu, N.; Gkougkousis, E.; Lounis, A.

2015-06-01

The LHC accelerator complex will be upgraded between 2020-2022, to the High-Luminosity-LHC, to considerably increase statistics for the various physics analyses. To operate under these challenging new conditions, and maintain excellent performance in track reconstruction and vertex location, the ATLAS pixel detector must be substantially upgraded and a full replacement is expected. Processing techniques for novel pixel designs are optimised through characterisation of test structures in a clean room and also through simulations with Technology Computer Aided Design (TCAD). A method to study non-perpendicular tracks through a pixel device is discussed. Comparison of TCAD simulations with Secondary Ion Mass Spectrometry (SIMS) measurements to investigate the doping profile of structures and validate the simulation process is also presented.

Contemporary Research on Parenting: Conceptual, Methodological, and Translational Issues

PubMed Central

Sleddens, Ester F. C.; Berge, Jerica; Connell, Lauren; Govig, Bert; Hennessy, Erin; Liggett, Leanne; Mallan, Kimberley; Santa Maria, Diane; Odoms-Young, Angela; St. George, Sara M.

2013-01-01

Abstract Researchers over the last decade have documented the association between general parenting style and numerous factors related to childhood obesity (e.g., children's eating behaviors, physical activity, and weight status). Many recent childhood obesity prevention programs are family focused and designed to modify parenting behaviors thought to contribute to childhood obesity risk. This article presents a brief consideration of conceptual, methodological, and translational issues that can inform future research on the role of parenting in childhood obesity. They include: (1) General versus domain specific parenting styles and practices; (2) the role of ethnicity and culture; (3) assessing bidirectional influences; (4) broadening assessments beyond the immediate family; (5) novel approaches to parenting measurement; and (6) designing effective interventions. Numerous directions for future research are offered. PMID:23944927

Design and fabrication of a polarization-independent two-port beam splitter.

PubMed

Feng, Jijun; Zhou, Changhe; Zheng, Jiangjun; Cao, Hongchao; Lv, Peng

2009-10-10

We design and manufacture a fused-silica polarization-independent two-port beam splitter grating. The physical mechanism of this deeply etched grating can be shown clearly by using the simplified modal method with consideration of corresponding accumulated phase difference of two excited propagating grating modes, which illustrates that the binary-phase fused-silica grating structure depends little on the incident wavelength, but mainly on the ratio of groove depth to grating period and the ratio of incident wavelength to grating period. These analytic results would also be very helpful for wavelength bandwidth analysis. The exact grating profile is optimized by using the rigorous coupled-wave analysis. Holographic recording technology and inductively coupled plasma etching are used to manufacture the fused-silica grating. Experimental results agree well with the theoretical values.

Opportunities and choice in a new vector era

NASA Astrophysics Data System (ADS)

Nowak, A.

2014-06-01

This work discusses the significant changes in computing landscape related to the progression of Moore's Law, and the implications on scientific computing. Particular attention is devoted to the High Energy Physics domain (HEP), which has always made good use of threading, but levels of parallelism closer to the hardware were often left underutilized. Findings of the CERN openlab Platform Competence Center are reported in the context of expanding "performance dimensions", and especially the resurgence of vectors. These suggest that data oriented designs are feasible in HEP and have considerable potential for performance improvements on multiple levels, but will rarely trump algorithmic enhancements. Finally, an analysis of upcoming hardware and software technologies identifies heterogeneity as a major challenge for software, which will require more emphasis on scalable, efficient design.

Design consideration of high voltage Ga2O3 vertical Schottky barrier diode with field plate

NASA Astrophysics Data System (ADS)

Choi, J.-H.; Cho, C.-H.; Cha, H.-Y.

2018-06-01

Gallium oxide (Ga2O3) based vertical Schottky barrier diodes (SBDs) were designed for high voltage switching applications. Since p-type Ga2O3 epitaxy growth or p-type ion implantation technique has not been developed yet, a field plate structure was employed in this study to maximize the breakdown voltage by suppressing the electric field at the anode edge. TCAD simulation was used for the physical analysis of Ga2O3 SBDs from which it was found that careful attention must be paid to the insulator under the field plate. Due to the extremely high breakdown field property of Ga2O3, an insulator with both high permittivity and high breakdown field must be used for the field plate formation.

Part of the job: the role of physical work conditions in the nurse turnover process.

PubMed

Vardaman, James M; Cornell, Paul T; Allen, David G; Gondo, Maria B; Muslin, Ivan S; Mobley, Robin N; Brock, Meagan E; Sigmon, Tracy L

2014-01-01

Retention of nursing staff remains an important issue for health care managers. Turnover research has focused primarily on motivational and social factors as keys to retention, whereas the role of the physical work conditions has received considerably less attention. However, work design theory suggests that physical work conditions may be an important factor in fostering retention among nursing staff. The aim of this study was to integrate work design theory with turnover process models to explore the influence of perceptions of physical work conditions on the development of turnover intentions among nursing staff. Drawing on two samples of registered nurses working in cancer units in metropolitan hospitals in the southeastern United States, this study explores the impact of perceptions of physical work conditions on turnover intentions using ordinary least squares regression. Hypotheses are tested in Study 1 and replicated in Study 2. A measure of perceptions of physical work conditions is also developed and validated using exploratory (Study 1) and confirmatory (Study 2) factor analyses. Perceptions of physical work conditions explain variance in turnover intentions above than that explained by motivational and social factors. Specifically, employee perceptions of noisy work conditions are found to significantly increase turnover intentions, whereas perceptions that work conditions facilitate tasks were found to significantly reduce turnover intentions. Perceptions of temperature and health hazard did not show significant effects. Results suggest that health care managers and scholars should re-examine the role of physical work conditions in the turnover process. Investments in upgrades that facilitate tasks may foster retention better than investments that simply improve employee comfort. Negative perceptions of work conditions may have no impact if they are considered a normal "part of the job," although negative perceptions of conditions that are viewed as under the organization's control may be important in creating a desire to leave.

Endurance Training and Cardiorespiratory Conditioning after Traumatic Brain Injury

PubMed Central

Mossberg, Kurt A.; Amonette, William E.; Masel, Brent E.

2010-01-01

Objective To examine the importance of cardiorespiratory conditioning after traumatic brain injury (TBI) and provide recommendations for patients recovering from TBI. Method Review of literature assessing the effectiveness of endurance training programs. Main outcomes and results A sedentary lifestyle and lack of endurance are common characteristics of individuals with TBI who have a reduction in peak aerobic capacity of 25-30% compared to healthy sedentary persons. Increased physical activity and exercise training improves cardiorespiratory fitness in many populations with physical and cognitive impairments. Therefore, increasing the endurance and cardiorespiratory fitness of persons with TBI would seem to have important health implications. However, review of the TBI literature reveals that there have been few well-designed, well-controlled studies of physiologic and psychological adaptations of fitness training. Also lacking are long-term follow-up studies of persons with TBI. Conclusions Assessing endurance capacity and cardiorespiratory fitness early in the TBI rehabilitation process merits consideration as a standard of care by professional rehabilitation societies. Also, providing effective, safe and accessible training modalities would seem to be an important consideration for persons with TBI, given the mobility impairments many possess. Long-term follow-up studies are needed to assess the effectiveness of cardiorespiratory training programs on overall morbidity and mortality. PMID:20473091

78 FR 24211 - Draft Guidance for Industry on Safety Considerations for Container Labels and Carton Labeling...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-24

... container labels and carton labeling design, is the second in a series of three planned guidance documents...] Draft Guidance for Industry on Safety Considerations for Container Labels and Carton Labeling Design To... entitled ``Safety Considerations for Container Labels and Carton Labeling Design to Minimize Medication...

78 FR 39736 - Draft Guidance for Industry: Considerations for the Design of Early-Phase Clinical Trials of...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-02

..., choosing a study population, using a control group and blinding, dose selection, treatment plans...] Draft Guidance for Industry: Considerations for the Design of Early-Phase Clinical Trials of Cellular... document entitled ``Guidance for Industry: Considerations for the Design of Early-Phase Clinical Trials of...

Promoting Physical Activity in Adapted Physical Education

ERIC Educational Resources Information Center

Yun, Joonkoo; Beamer, Jennifer

2018-01-01

The importance of physical activity has received considerable attention during the past decade. Physical education has been viewed as a cost-effective way to promote physical activity as a public health initiative. In fact, the Centers for Disease Control and Prevention recommends that a "substantial percentage" of students' overall…

Non-singular acoustic cloak derived by the ray tracing method with rotationally symmetric transformations

PubMed Central

Wu, Linzhi

2016-01-01

Recently, the ray tracing method has been used to derive the non-singular cylindrical invisibility cloaks for out-of-plane shear waves, which is impossible via the transformation method directly owing to the singular push-forward mapping. In this paper, the method is adopted to design a kind of non-singular acoustic cloak. Based on Hamilton's equations of motion, eikonal equation and pre-designed ray equations, we derive several constraint equations for bulk modulus and density tensor. On the premise that the perfect matching conditions are satisfied, a series of non-singular physical profiles can be obtained by arranging the singular terms reasonably. The physical profiles derived by the ray tracing method will degenerate to the transformation-based solutions when taking the transport equation into consideration. This illuminates the essence of the newly designed cloaks that they are actually the so-called eikonal cloaks that can accurately control the paths of energy flux but with small disturbance in energy distribution along the paths. The near-perfect invisible performance has been demonstrated by the numerical ray tracing results and the pressure distribution snapshots. Finally, a kind of reduced cloak is conceived, and the good invisible performance has been measured quantitatively by the normalized scattering width. PMID:27118884

An empirical study of the process of crafting and using definitions

NASA Astrophysics Data System (ADS)

Little, Angela Jean

In this dissertation I analyze the process of crafting definitions whose purpose is classification. The context I examine is undergraduate upper-division physical science majors defining and naming sub-categories of a physical phenomenon in the context of a design task over an extended period of time. The goal of the design task is one of classification: help people better identify the phenomenon out in the world. I first develop an analytic framework for the process of improving a definition. This framework involves an interplay between four main elements: the current state of the definition, criteria for what makes a good definition, examples, and definitionally unarticulated knowledge (DUK). By DUK, I mean implicit judgments that definers make about categorization that have not been incorporated into the definition, per se. I show how criteria and the practices associated with meeting them guide the refinement work. Once participants craft their definition a question emerges: to what extent does it serve them as a tool when they make sense of new examples? I zoom in on moments where new examples are introduced by participants or the facilitator and describe the extent to which students rely on their own crafted definition. The consideration of a new example can sometimes lead to participants naming a new sub-category and I analyze this process as well. The detailed empirical analysis is bookended by a set of workshop design principles that made the analysis possible and some educational implications of the work. I lay out a set of design principles for creating activities wherein people engage productively in collaboratively defining. I conclude by exploring the educational implications for college physics teaching as well as more general instances where one is interested in crafting a definition for the purpose of classification.

Designing a biomechanics investigation: choosing the right model.

PubMed

Olson, Steven A; Marsh, J Lawrence; Anderson, Donald D; Latta Pe, Loren L

2012-12-01

Physical testing is commonly performed to answer important biomechanical questions in the treatment of patients with fractures and other orthopaedic conditions. However, a variety of mistakes that are made in performing such investigations can severely limit their impact. The goal of this article is to discuss important aspects of study design to consider when planning for biomechanical investigations so that the studies can provide maximal benefit to the field. The best mechanical investigations begin with a good research question, one that comes out of patient care experience, is clearly defined, and can be stated concisely. The first practical issue to be considered is often choosing the type of physical specimens to be tested to address the research question. A related issue involves determining how many specimens will be needed to answer the posed mechanical question. Cadavers are generally still the closest to the actual clinical situation, but they are limited by interspecimen variability, which often requires a matched pair design that can address only one question. Simulated bone specimens limit variability and can replicate normal and osteoporotic bone. In planning the physical testing, the critical mechanical variables involved in answering the research question must be identified and due consideration given to deciding how best to measure them. Another important issue that arises relates to whether or not single static loadings will suffice in the testing (eg, to study construct stiffness) or whether cyclic dynamic testing is necessary (eg, to study late failure likely attributable to fatigue). To summarize, experimental design should be carefully planned before initiating mechanical testing. Sample size calculations should be performed to ensure adequate power and that clinically relevant differences can be detected. This pregame analysis can save significant time and cost and greatly increase the likelihood that the results will advance knowledge.

20 CFR 220.132 - Physical exertion requirements.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 20 Employees' Benefits 1 2010-04-01 2010-04-01 false Physical exertion requirements. 220.132... ACT DETERMINING DISABILITY Vocational Considerations § 220.132 Physical exertion requirements. To determine the physical exertion requirements of work in the national economy, jobs are classified as...

20 CFR 220.132 - Physical exertion requirements.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 20 Employees' Benefits 1 2013-04-01 2012-04-01 true Physical exertion requirements. 220.132... ACT DETERMINING DISABILITY Vocational Considerations § 220.132 Physical exertion requirements. To determine the physical exertion requirements of work in the national economy, jobs are classified as...

20 CFR 220.132 - Physical exertion requirements.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 20 Employees' Benefits 1 2011-04-01 2011-04-01 false Physical exertion requirements. 220.132... ACT DETERMINING DISABILITY Vocational Considerations § 220.132 Physical exertion requirements. To determine the physical exertion requirements of work in the national economy, jobs are classified as...

20 CFR 220.132 - Physical exertion requirements.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 20 Employees' Benefits 1 2014-04-01 2012-04-01 true Physical exertion requirements. 220.132... ACT DETERMINING DISABILITY Vocational Considerations § 220.132 Physical exertion requirements. To determine the physical exertion requirements of work in the national economy, jobs are classified as...

20 CFR 220.132 - Physical exertion requirements.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 20 Employees' Benefits 1 2012-04-01 2012-04-01 false Physical exertion requirements. 220.132... ACT DETERMINING DISABILITY Vocational Considerations § 220.132 Physical exertion requirements. To determine the physical exertion requirements of work in the national economy, jobs are classified as...

Production Design: Holding It Together.

ERIC Educational Resources Information Center

Connelly, James O.

1994-01-01

Discusses production design for videos. Outlines general considerations (opening, transitions, content areas, and closing) and specific considerations (typography, screen design, music, and sound effects). Offers an example. (SR)

Physical principles for DNA tile self-assembly.

PubMed

Evans, Constantine G; Winfree, Erik

2017-06-19

DNA tiles provide a promising technique for assembling structures with nanoscale resolution through self-assembly by basic interactions rather than top-down assembly of individual structures. Tile systems can be programmed to grow based on logical rules, allowing for a small number of tile types to assemble large, complex assemblies that can retain nanoscale resolution. Such algorithmic systems can even assemble different structures using the same tiles, based on inputs that seed the growth. While programming and theoretical analysis of tile self-assembly often makes use of abstract logical models of growth, experimentally implemented systems are governed by nanoscale physical processes that can lead to very different behavior, more accurately modeled by taking into account the thermodynamics and kinetics of tile attachment and detachment in solution. This review discusses the relationships between more abstract and more physically realistic tile assembly models. A central concern is how consideration of model differences enables the design of tile systems that robustly exhibit the desired abstract behavior in realistic physical models and in experimental implementations. Conversely, we identify situations where self-assembly in abstract models can not be well-approximated by physically realistic models, putting constraints on physical relevance of the abstract models. To facilitate the discussion, we introduce a unified model of tile self-assembly that clarifies the relationships between several well-studied models in the literature. Throughout, we highlight open questions regarding the physical principles for DNA tile self-assembly.

Engine design considerations for 2nd generation supersonic transports

NASA Technical Reports Server (NTRS)

Howlett, R. A.

1975-01-01

The environmental and economic goals projected for advanced supersonic transports will require revolutionary improvements in propulsion systems. Variable cycle engine concepts that incorporate unique components and advanced technologies show promise in meeting these goals. Pratt & Whitney Aircraft is conducting conceptual design studies of variable cycle engine concepts under NASA sponsorship. This paper reviews some of the design considerations for these engine concepts. Emphasis is placed on jet noise abatement, reduction of emissions, performance improvements, installation considerations, hot-section characteristics and control system requirements. Two representative variable cycle engine concepts that incorporate these basic design considerations are described.

Monte Carlo tree search -based non-coplanar trajectory design for station parameter optimized radiation therapy (SPORT).

PubMed

Dong, Peng; Liu, Hongcheng; Xing, Lei

2018-06-04

An important yet challenging problem in LINAC-based rotational arc radiation therapy is the design of beam trajectory, which requires simultaneous consideration of delivery efficiency and final dose distribution. In this work, we propose a novel trajectory selection strategy by developing a Monte Carlo tree search (MCTS) algorithm during the beam trajectory selection process. Methods: To search through the vast number of possible trajectories, MCTS algorithm was implemented. In this approach, a candidate trajectory is explored by starting from a leaf node and sequentially examining the next level of linked nodes with consideration of geometric and physical constraints. The maximum Upper Confidence Bounds for Trees, which is a function of average objective function value and the number of times the node under testing has been visited, was employed to intelligently select the trajectory. For each candidate trajectory, we run an inverse fluence map optimization with an infinity norm regularization. The ranking of the plan as measured by the corresponding objective function value was then fed back to update the statistics of the nodes on the trajectory. The method was evaluated with a chest wall and a brain case, and the results were compared with the coplanar and noncoplanar 4pi beam configurations. Results: For both clinical cases, the MCTS method found effective and easy-to-deliver trajectories within an hour. As compared with the coplanar plans, it offers much better sparing of the OARs while maintaining the PTV coverage. The quality of the MCTS-generated plan is found to be comparable to the 4pi plans. Conclusion: AI based on MCTS is valuable to facilitate the design of beam trajectory and paves the way for future clinical use of non-coplanar treatment delivery. . © 2018 Institute of Physics and Engineering in Medicine.

Design Considerations | Efficient Windows Collaborative

Science.gov Websites

Foundry Foundry New Construction Windows Window Selection Tool Selection Process Design Guidance Installation Replacement Windows Window Selection Tool Assessing Options Selection Process Design Guidance Installation Understanding Windows Benefits Design Considerations Measuring Performance Performance Standards

Design considerations for rechargeable lithium batteries

NASA Technical Reports Server (NTRS)

Shen, D. H.; Huang, C.-K.; Davies, E.; Perrone, D.; Surampudi, S.; Halpert, Gerald

1993-01-01

Viewgraphs of a discussion of design considerations for rechargable lithium batteries. The objective is to determine the influence of cell design parameters on the performance of Li-TiS2 cells. Topics covered include cell baseline design and testing, cell design and testing, cell design parameters studies, and cell cycling performance.

The Importance of Leisure Activities in the Relationship between Physical Health and Well-Being in a Life Span Sample.

PubMed

Paggi, Michelle E; Jopp, Daniela; Hertzog, Christopher

2016-01-01

Previous studies have examined the relationships between physical health and leisure activities and between leisure activities and well-being, but, to our knowledge, none has examined these relationships simultaneously. This study investigated the relationships between leisure activities, health and well-being considering the role of age, and whether leisure activities mediate the relationship between physical health and well-being. Utilizing a cross-sectional database of 259 adults (ages 18-81 years) who completed several questionnaires, linear regression models and mediation models were tested. Regression analyses indicated that physical health was related to leisure activities and leisure activities were related to well-being. When physical health was measured by subjective ratings, age had a stronger relationship with leisure activities. However, when physical health was indicated by health restrictions, physical health had a stronger relationship with leisure activities than did age. Leisure activities were a partial mediator of the relationship between physical health and well-being. The results demonstrated that the reduction in leisure activities with age has more to do with physical health limitations than with older age itself. In addition, regardless of age, the benefits of physical health for well-being are due in part to the level of leisure activity participation. These results highlight the importance of leisure activities for successful aging throughout the adult life span. Interventions designed to improve well-being through increasing leisure activity participation should take physical health into consideration, particularly for older adults. © 2016 S. Karger AG, Basel.

Conceptual design considerations and neutronics of lithium fall laser fusion target chambers

DOE Office of Scientific and Technical Information (OSTI.GOV)

Meier, W.R.; Thomson, W.B.

1978-05-31

Atomics International and Lawrence Livermore Laboratory are involved in the conceptual design of a laser fusion power plant incorporating the lithium fall target chamber. In this paper we discuss some of the more important design considerations for the target chamber and evaluate its nuclear performance. Sizing and configuration of the fall, hydraulic effects, and mechanical design considerations are addressed. The nuclear aspects examined include tritium breeding, energy deposition, and radiation damage.

Critical Considerations for Physical Literacy Policy in Public Health, Recreation, Sport, and Education Agencies

ERIC Educational Resources Information Center

Dudley, Dean; Cairney, John; Wainwright, Nalda; Kriellaars, Dean; Mitchell, Drew

2017-01-01

The International Charter for Physical Education, Physical Activity, and Sport clearly states that vested agencies must participate in creating a strategic vision and identify policy options and priorities that enable the fundamental right for all people to participate in meaningful physical activity across their life course. Physical literacy is…

Understanding Physics in Relation to Working Memory

ERIC Educational Resources Information Center

Chen, Wen-Chao; Whitehead, Rex

2009-01-01

The aim of physics education is to generate understanding of physics and there is considerable anecdotal evidence that passing examinations in physics is not the same as understanding the subject. This paper describes how the areas of difficulties in understanding of physics were determined for pupils in Taiwan aged 13-15. Test material which…

Evaluation of a School Building in Turkey According to the Basic Sustainable Design Criteria

NASA Astrophysics Data System (ADS)

Arslan, H. D.

2017-08-01

In Turkey, as well as many other developing countries, the significance of sustainable education buildings has only recently become recognized and the issue of sustainability issue has not been sufficiently involved in laws and regulations. In this study, first of all architectural sustainability with basic design criteria has been explained. After that selected type primary school project in Turkey has been evaluated according to the sustainable design criteria. Type project of school buildings significantly limits the sustainability performance expected from buildings. It is clear that type projects shorten the planning time as they include a designing process that is independent of settlement and they are repeated in various places with different characteristics, indeed. On the other hand; abundance of disadvantages such as the overlook of the natural physical and structural properties of the location mostly restricts the sustainable design of the building. For sustainable buildings, several factors such as the environment, land, climate, insolation, direction etc. shall be taken into consideration at the beginning stage. Therefore; implementation of type projects can be deemed to be inappropriate for sustainability.

Unsteady Adjoint Approach for Design Optimization of Flapping Airfoils

NASA Technical Reports Server (NTRS)

Lee, Byung Joon; Liou, Meng-Sing

2012-01-01

This paper describes the work for optimizing the propulsive efficiency of flapping airfoils, i.e., improving the thrust under constraining aerodynamic work during the flapping flights by changing their shape and trajectory of motion with the unsteady discrete adjoint approach. For unsteady problems, it is essential to properly resolving time scales of motion under consideration and it must be compatible with the objective sought after. We include both the instantaneous and time-averaged (periodic) formulations in this study. For the design optimization with shape parameters or motion parameters, the time-averaged objective function is found to be more useful, while the instantaneous one is more suitable for flow control. The instantaneous objective function is operationally straightforward. On the other hand, the time-averaged objective function requires additional steps in the adjoint approach; the unsteady discrete adjoint equations for a periodic flow must be reformulated and the corresponding system of equations solved iteratively. We compare the design results from shape and trajectory optimizations and investigate the physical relevance of design variables to the flapping motion at on- and off-design conditions.

Approximate analytical relationships for linear optimal aeroelastic flight control laws

NASA Astrophysics Data System (ADS)

Kassem, Ayman Hamdy

1998-09-01

This dissertation introduces new methods to uncover functional relationships between design parameters of a contemporary control design technique and the resulting closed-loop properties. Three new methods are developed for generating such relationships through analytical expressions: the Direct Eigen-Based Technique, the Order of Magnitude Technique, and the Cost Function Imbedding Technique. Efforts concentrated on the linear-quadratic state-feedback control-design technique applied to an aeroelastic flight control task. For this specific application, simple and accurate analytical expressions for the closed-loop eigenvalues and zeros in terms of basic parameters such as stability and control derivatives, structural vibration damping and natural frequency, and cost function weights are generated. These expressions explicitly indicate how the weights augment the short period and aeroelastic modes, as well as the closed-loop zeros, and by what physical mechanism. The analytical expressions are used to address topics such as damping, nonminimum phase behavior, stability, and performance with robustness considerations, and design modifications. This type of knowledge is invaluable to the flight control designer and would be more difficult to formulate when obtained from numerical-based sensitivity analysis.

Design of a Blended Learning Environment: Considerations and Implementation Issues

ERIC Educational Resources Information Center

Gedik, Nuray; Kiraz, Ercan; Ozden, M. Yasar

2013-01-01

This study identified critical issues in the design of a blended learning environment by examining basic design considerations and implementation issues. Following a design-based research approach with the phenomenological tradition of qualitative research, the study investigated instructor experiences relating to the design, development, and…

Censored rainfall modelling for estimation of fine-scale extremes

NASA Astrophysics Data System (ADS)

Cross, David; Onof, Christian; Winter, Hugo; Bernardara, Pietro

2018-01-01

Reliable estimation of rainfall extremes is essential for drainage system design, flood mitigation, and risk quantification. However, traditional techniques lack physical realism and extrapolation can be highly uncertain. In this study, we improve the physical basis for short-duration extreme rainfall estimation by simulating the heavy portion of the rainfall record mechanistically using the Bartlett-Lewis rectangular pulse (BLRP) model. Mechanistic rainfall models have had a tendency to underestimate rainfall extremes at fine temporal scales. Despite this, the simple process representation of rectangular pulse models is appealing in the context of extreme rainfall estimation because it emulates the known phenomenology of rainfall generation. A censored approach to Bartlett-Lewis model calibration is proposed and performed for single-site rainfall from two gauges in the UK and Germany. Extreme rainfall estimation is performed for each gauge at the 5, 15, and 60 min resolutions, and considerations for censor selection discussed.

Interplay between defects, disorder and flexibility in metal-organic frameworks

NASA Astrophysics Data System (ADS)

Bennett, Thomas D.; Cheetham, Anthony K.; Fuchs, Alain H.; Coudert, François-Xavier

2017-01-01

Metal-organic frameworks are a novel family of chemically diverse materials, which are of interest across engineering, physics, chemistry, biology and medicine-based disciplines. Since the development of the field in its current form more than two decades ago, priority has been placed on the synthesis of new structures. However, more recently, a clear trend has emerged in shifting the emphasis from material design to exploring the chemical and physical properties of structures already known. In particular, although such nanoporous materials were traditionally seen as rigid crystalline structures, there is growing evidence that large-scale flexibility, the presence of defects and long-range disorder are not the exception in metal-organic frameworks, but the rule. Here we offer some perspective into how these concepts are perhaps inescapably intertwined, highlight recent advances in our understanding and discuss how a consideration of the interfaces between them may lead to enhancements of the materials' functionalities.

"Keep All Thee 'Til the End": Reclaiming the Lifeworld for Patients in the Hospice Setting.

PubMed

West, Emily; Onwuteaka-Philipsen, Bregje; Philipsen, Hans; Higginson, Irene J; Pasman, H R W

2017-01-01

St Christopher's Hospice, London, was founded to provide specialist care to the incurably ill. We studied the dimensions of difference that set St Christopher's Hospice apart from hospital care of the dying, focusing on physical space and social organization. Material from 1953 to 1980 from the Cicely Saunders Archive was analyzed qualitatively. Through thematic analysis, quotes were found and analyzed using open coding. Five themes were developed. Themes identified were home/homelike, community, consideration of others, link with outside world, and privacy. The hospice philosophy functioned as the catalyst for the development of the physical environment of St Christopher's Hospice. Taking Habermas' concept of lifeworld, it seems that, in contrast to acute care, the need for hospice to formulate their own lifeworld to support and fully engage patients was central. As lifeworlds are culture sensitive, this underlines the need for variation in design and organization of hospices around the world.

Validating a Model for Welding Induced Residual Stress Using High-Energy X-ray Diffraction

NASA Astrophysics Data System (ADS)

Mach, J. C.; Budrow, C. J.; Pagan, D. C.; Ruff, J. P. C.; Park, J.-S.; Okasinski, J.; Beaudoin, A. J.; Miller, M. P.

2017-05-01

Integrated computational materials engineering (ICME) provides a pathway to advance performance in structures through the use of physically-based models to better understand how manufacturing processes influence product performance. As one particular challenge, consider that residual stresses induced in fabrication are pervasive and directly impact the life of structures. For ICME to be an effective strategy, it is essential that predictive capability be developed in conjunction with critical experiments. In the present work, simulation results from a multi-physics model for gas metal arc welding are evaluated through x-ray diffraction using synchrotron radiation. A test component was designed with intent to develop significant gradients in residual stress, be representative of real-world engineering application, yet remain tractable for finely spaced strain measurements with positioning equipment available at synchrotron facilities. The experimental validation lends confidence to model predictions, facilitating the explicit consideration of residual stress distribution in prediction of fatigue life.

A survey of anthropometry and physical accommodation in ergonomics curricula.

PubMed

Garneau, Christopher J; Parkinson, Matthew B

2016-01-01

The size and shape of users are an important consideration for many products and environments. Designers and engineers in many disciplines must often accommodate these attributes to meet objectives such as fit and safety. When practitioners have academic training in addressing these issues, it is typically through courses in Human Factors/Ergonomics (HF/E). This paper investigates education related to physical accommodation and offers suggestions for improvement. A survey was conducted wherein 21 instructors at 18 universities in the United States provided syllabi for 29 courses, which were analysed to determine topics related to anthropometry and resources used for the courses. The results show that within the U.S., anthropometry is covered in the majority of courses discussing physical ergonomics, but important related concepts were often omitted (e.g., digital human modelling, multivariate accommodation and variability across global populations). Curricula could be improved by incorporating more accurate anthropometry, multivariate problems and interactive online tools. This paper describes a study investigating collegiate ergonomics courses within the U.S. in the area of physical accommodation. Course schedules and texts were studied for their treatment of several topics related to accommodating the spatial requirements (anthropometry) of users. Recommendations are made for improving course curricula.

A Delay-Aware and Reliable Data Aggregation for Cyber-Physical Sensing

PubMed Central

Zhang, Jinhuan; Long, Jun; Zhang, Chengyuan; Zhao, Guihu

2017-01-01

Physical information sensed by various sensors in a cyber-physical system should be collected for further operation. In many applications, data aggregation should take reliability and delay into consideration. To address these problems, a novel Tiered Structure Routing-based Delay-Aware and Reliable Data Aggregation scheme named TSR-DARDA for spherical physical objects is proposed. By dividing the spherical network constructed by dispersed sensor nodes into circular tiers with specifically designed widths and cells, TSTR-DARDA tries to enable as many nodes as possible to transmit data simultaneously. In order to ensure transmission reliability, lost packets are retransmitted. Moreover, to minimize the latency while maintaining reliability for data collection, in-network aggregation and broadcast techniques are adopted to deal with the transmission between data collecting nodes in the outer layer and their parent data collecting nodes in the inner layer. Thus, the optimization problem is transformed to minimize the delay under reliability constraints by controlling the system parameters. To demonstrate the effectiveness of the proposed scheme, we have conducted extensive theoretical analysis and comparisons to evaluate the performance of TSR-DARDA. The analysis and simulations show that TSR-DARDA leads to lower delay with reliability satisfaction. PMID:28218668

Reliability- and performance-based robust design optimization of MEMS structures considering technological uncertainties

NASA Astrophysics Data System (ADS)

Martowicz, Adam; Uhl, Tadeusz

2012-10-01

The paper discusses the applicability of a reliability- and performance-based multi-criteria robust design optimization technique for micro-electromechanical systems, considering their technological uncertainties. Nowadays, micro-devices are commonly applied systems, especially in the automotive industry, taking advantage of utilizing both the mechanical structure and electronic control circuit on one board. Their frequent use motivates the elaboration of virtual prototyping tools that can be applied in design optimization with the introduction of technological uncertainties and reliability. The authors present a procedure for the optimization of micro-devices, which is based on the theory of reliability-based robust design optimization. This takes into consideration the performance of a micro-device and its reliability assessed by means of uncertainty analysis. The procedure assumes that, for each checked design configuration, the assessment of uncertainty propagation is performed with the meta-modeling technique. The described procedure is illustrated with an example of the optimization carried out for a finite element model of a micro-mirror. The multi-physics approach allowed the introduction of several physical phenomena to correctly model the electrostatic actuation and the squeezing effect present between electrodes. The optimization was preceded by sensitivity analysis to establish the design and uncertain domains. The genetic algorithms fulfilled the defined optimization task effectively. The best discovered individuals are characterized by a minimized value of the multi-criteria objective function, simultaneously satisfying the constraint on material strength. The restriction of the maximum equivalent stresses was introduced with the conditionally formulated objective function with a penalty component. The yielded results were successfully verified with a global uniform search through the input design domain.

The development of summary components for the Disablement in the Physically Active scale in collegiate athletes.

PubMed

Houston, Megan N; Hoch, Johanna M; Van Lunen, Bonnie L; Hoch, Matthew C

2015-11-01

The Disablement in the Physically Active scale (DPA) is a generic patient-reported outcome designed to evaluate constructs of disability in physically active populations. The purpose of this study was to analyze the DPA scale structure for summary components. Four hundred and fifty-six collegiate athletes completed a demographic form and the DPA. A principal component analysis (PCA) was conducted with oblique rotation. Factors with eigenvalues >1 that explained >5 % of the variance were retained. The PCA revealed a two-factor structure consistent with paradigms used to develop the original DPA. Items 1-12 loaded on Factors 1 and Items 13-16 loaded on Factor 2. Items 1-12 pertain to impairment, activity limitations, and participation restrictions. Items 13-16 address psychosocial and emotional well-being. Consideration of item content suggested Factor 1 concerned physical function, while Factor 2 concerned mental well-being. Thus, items clustered around Factor 1 and 2 were identified as physical (DPA-PSC) and mental (DPA-MSC) summary components, respectively. Together, the factors accounted for 65.1 % of the variance. The PCA revealed a two-factor structure for the DPA that resulted in DPA-PSC and DPA-MSC. Analyzing the DPA as separate constructs may provide distinct information that could help to prescribe treatment and rehabilitation strategies.

Design considerations for composite fuselage structure of commercial transport aircraft

NASA Technical Reports Server (NTRS)

Davis, G. W.; Sakata, I. F.

1981-01-01

The structural, manufacturing, and service and environmental considerations that could impact the design of composite fuselage structure for commercial transport aircraft application were explored. The severity of these considerations was assessed and the principal design drivers delineated. Technical issues and potential problem areas which must be resolved before sufficient confidence is established to commit to composite materials were defined. The key issues considered are: definition of composite fuselage design specifications, damage tolerance, and crashworthiness.

Does increased exercise or physical activity alter ad-libitum daily energy intake or macronutrient composition in healthy adults? A systematic review.

PubMed

Donnelly, Joseph E; Herrmann, Stephen D; Lambourne, Kate; Szabo, Amanda N; Honas, Jeffery J; Washburn, Richard A

2014-01-01

The magnitude of the negative energy balance induced by exercise may be reduced due to compensatory increases in energy intake. TO ADDRESS THE QUESTION: Does increased exercise or physical activity alter ad-libitum daily energy intake or macronutrient composition in healthy adults? PubMed and Embase were searched (January 1990-January 2013) for studies that presented data on energy and/or macronutrient intake by level of exercise, physical activity or change in response to exercise. Ninety-nine articles (103 studies) were included. Primary source articles published in English in peer-reviewed journals. Articles that presented data on energy and/or macronutrient intake by level of exercise or physical activity or changes in energy or macronutrient intake in response to acute exercise or exercise training in healthy (non-athlete) adults (mean age 18-64 years). Articles were grouped by study design: cross-sectional, acute/short term, non-randomized, and randomized trials. Considerable heterogeneity existed within study groups for several important study parameters, therefore a meta-analysis was considered inappropriate. Results were synthesized and presented by study design. No effect of physical activity, exercise or exercise training on energy intake was shown in 59% of cross-sectional studies (n = 17), 69% of acute (n = 40), 50% of short-term (n = 10), 92% of non-randomized (n = 12) and 75% of randomized trials (n = 24). Ninety-four percent of acute, 57% of short-term, 100% of non-randomized and 74% of randomized trials found no effect of exercise on macronutrient intake. Forty-six percent of cross-sectional trials found lower fat intake with increased physical activity. The literature is limited by the lack of adequately powered trials of sufficient duration, which have prescribed and measured exercise energy expenditure, or employed adequate assessment methods for energy and macronutrient intake. We found no consistent evidence that increased physical activity or exercise effects energy or macronutrient intake.

Smart homes, private homes? An empirical study of technology researchers' perceptions of ethical issues in developing smart-home health technologies.

PubMed

Birchley, Giles; Huxtable, Richard; Murtagh, Madeleine; Ter Meulen, Ruud; Flach, Peter; Gooberman-Hill, Rachael

2017-04-04

Smart-home technologies, comprising environmental sensors, wearables and video are attracting interest in home healthcare delivery. Development of such technology is usually justified on the basis of the technology's potential to increase the autonomy of people living with long-term conditions. Studies of the ethics of smart-homes raise concerns about privacy, consent, social isolation and equity of access. Few studies have investigated the ethical perspectives of smart-home engineers themselves. By exploring the views of engineering researchers in a large smart-home project, we sought to contribute to dialogue between ethics and the engineering community. Either face-to-face or using Skype, we conducted in-depth qualitative interviews with 20 early- and mid-career smart-home researchers from a multi-centre smart-home project, who were asked to describe their own experience and to reflect more broadly about ethical considerations that relate to smart-home design. With participants' consent, interviews were audio-recorded, transcribed and analysed using a thematic approach. Two overarching themes emerged: in 'Privacy', researchers indicated that they paid close attention to negative consequences of potential unauthorised information sharing in their current work. However, when discussing broader issues in smart-home design beyond the confines of their immediate project, researchers considered physical privacy to a lesser extent, even though physical privacy may manifest in emotive concerns about being watched or monitored. In 'Choice', researchers indicated they often saw provision of choice to end-users as a solution to ethical dilemmas. While researchers indicated that choices of end-users may need to be restricted for technological reasons, ethical standpoints that restrict choice were usually assumed and embedded in design. The tractability of informational privacy may explain the greater attention that is paid to it. However, concerns about physical privacy may reduce acceptability of smart-home technologies to future end-users. While attention to choice suggests links with privacy, this may misidentify the sources of privacy and risk unjustly burdening end-users with problems that they cannot resolve. Separating considerations of choice and privacy may result in more satisfactory treatment of both. Finally, through our engagement with researchers as participants this study demonstrates the relevance of (bio)ethics as a critical partner to smart-home engineering.

Lack of interest in physical activity - individual and environmental attributes in adults across Europe: The SPOTLIGHT project.

PubMed

Carraça, Eliana V; Mackenbach, Joreintje D; Lakerveld, Jeroen; Rutter, Harry; Oppert, Jean-Michel; De Bourdeaudhuij, Ilse; Compernolle, Sofie; Roda, Célina; Bardos, Helga; Teixeira, Pedro J

2018-06-01

A considerable proportion of European adults report little or no interest in physical activity. Identifying individual-level and environmental-level characteristics of these individuals can help designing effective interventions and policies to promote physical activity. This cross-sectional study additionally explored associations between level of interest and physical activity, after controlling for other individual and environmental variables. Measures of objective and perceived features of the physical environment of residence, self-reported physical activity and other lifestyle behaviors, barriers towards physical activity, general health, and demographics were obtained from 5205 European adults participating in the 2014 online SPOTLIGHT survey. t-Tests, chi-square tests, and generalized estimating equations with negative binomial log-link function were conducted. Adults not interested in physical activity reported a higher BMI and a lower self-rated health, were less educated, and to a smaller extent female and less frequently employed. They were more prone to have less healthy eating habits, and to perceive more barriers towards physical activity. Only minor differences were observed in environmental attributes: the non-interested were slightly more likely to live in neighborhoods objectively characterized as less aesthetic and containing more destinations, and perceived as less functional, safe, and aesthetic. Even after controlling for other individual and environmental factors, interest in physical activity remained a significant correlate of physical activity, supporting the importance of this association. This study is among the first to describe characteristics of individuals with reduced interest in physical activity, suggesting that (lack of) interest is a robust correlate of physical activity in several personal and environmental conditions. Copyright © 2018 Elsevier Inc. All rights reserved.

Physical Requirements of the Workplace: Research Considerations for Personnel Selection.

ERIC Educational Resources Information Center

Hogan, Joyce C.

Personnel selection processes for physically demanding jobs often discriminate against women, minorities, and handicapped individuals. Developing and validating job-related performance tests requires the assessment of the physical demands of a job and of the same physical capabilities in individuals. Job analysis is a systematic assessment…

Injury and Inclusion: Understanding Common Legal Concerns in Physical Education

ERIC Educational Resources Information Center

McCoy, Lauren; Esslinger, Keri; Baghurst, Timothy

2017-01-01

Physical education teachers are often focused on the many benefits of physical education to students, but there must also be a consideration of risk. How can the risks in physical education be minimized to maximize the benefits? One way to accomplish this goal is to increase physical educators' understanding of the legal risks related to…

A meta-model based approach for rapid formability estimation of continuous fibre reinforced components

NASA Astrophysics Data System (ADS)

Zimmerling, Clemens; Dörr, Dominik; Henning, Frank; Kärger, Luise

2018-05-01

Due to their high mechanical performance, continuous fibre reinforced plastics (CoFRP) become increasingly important for load bearing structures. In many cases, manufacturing CoFRPs comprises a forming process of textiles. To predict and optimise the forming behaviour of a component, numerical simulations are applied. However, for maximum part quality, both the geometry and the process parameters must match in mutual regard, which in turn requires numerous numerically expensive optimisation iterations. In both textile and metal forming, a lot of research has focused on determining optimum process parameters, whilst regarding the geometry as invariable. In this work, a meta-model based approach on component level is proposed, that provides a rapid estimation of the formability for variable geometries based on pre-sampled, physics-based draping data. Initially, a geometry recognition algorithm scans the geometry and extracts a set of doubly-curved regions with relevant geometry parameters. If the relevant parameter space is not part of an underlying data base, additional samples via Finite-Element draping simulations are drawn according to a suitable design-table for computer experiments. Time saving parallel runs of the physical simulations accelerate the data acquisition. Ultimately, a Gaussian Regression meta-model is built from the data base. The method is demonstrated on a box-shaped generic structure. The predicted results are in good agreement with physics-based draping simulations. Since evaluations of the established meta-model are numerically inexpensive, any further design exploration (e.g. robustness analysis or design optimisation) can be performed in short time. It is expected that the proposed method also offers great potential for future applications along virtual process chains: For each process step along the chain, a meta-model can be set-up to predict the impact of design variations on manufacturability and part performance. Thus, the method is considered to facilitate a lean and economic part and process design under consideration of manufacturing effects.

Prevalence of physical inactivity in Iran: a systematic review.

PubMed

Fakhrzadeh, Hossein; Djalalinia, Shirin; Mirarefin, Mojdeh; Arefirad, Tahereh; Asayesh, Hamid; Safiri, Saeid; Samami, Elham; Mansourian, Morteza; Shamsizadeh, Morteza; Qorbani, Mostafa

2016-01-01

Introduction: Physical inactivity is one of the most important risk factors for chronic diseases, including cardiovascular disease, cancer, and stroke. We aim to conduct a systematic review of the prevalence of physical inactivity in Iran. Methods: We searched international databases; ISI, PubMed/Medline, Scopus, and national databases Irandoc, Barakat knowledge network system, and Scientific Information Database (SID). We collected data for outcome measures of prevalence of physical inactivity by sex, age, province, and year. Quality assessment and data extraction has been conducted independently by two independent research experts. There were no limitations for time and language. Results: We analyzed data for prevalence of physical inactivity in Iranian population. According to our search strategy we found 254 records; of them 185 were from international databases and the remaining 69 were obtained from national databases after refining the data, 34 articles that met eligible criteria remained for data extraction. From them respectively; 9, 20, 2 and 3 studies were at national, provincial, regional and local levels. The estimates for inactivity ranged from approximately 30% to almost 70% and had considerable variation between sexes and studied sub-groups. Conclusion: In Iran, most of studies reported high prevalence of physical inactivity. Our findings reveal a heterogeneity of reported values, often from differences in study design, measurement tools and methods, different target groups and sub-population sampling. These data do not provide the possibility of aggregation of data for a comprehensive inference.

Equations for estimating Clark Unit-hydrograph parameters for small rural watersheds in Illinois

USGS Publications Warehouse

Straub, Timothy D.; Melching, Charles S.; Kocher, Kyle E.

2000-01-01

Simulation of the measured discharge hydrographs for the verification storms utilizing TC and R obtained from the estimation equations yielded good results. The error in peak discharge for 21 of the 29 verification storms was less than 25 percent, and the error in time-to-peak discharge for 18 of the 29 verification storms also was less than 25 percent. Therefore, applying the estimation equations to determine TC and R for design-storm simulation may result in reliable design hydrographs, as long as the physical characteristics of the watersheds under consideration are within the range of those characteristics for the watersheds in this study [area: 0.02-2.3 mi2, main-channel length: 0.17-3.4 miles, main-channel slope: 10.5-229 feet per mile, and insignificant percentage of impervious cover].

Environmental design, work, and well being: managing occupational stress through changes in the workplace environment.

PubMed

Heerwagen, J H; Heubach, J G; Montgomery, J; Weimer, W C

1995-09-01

The physical environment can be an important contributor to occupational stress. Factors that contribute to stress and other negative outcomes include: lack of control over the environment, distractions from coworkers, lack of privacy, noise, crowding, and environmental deprivations (such as lack of windows and aesthetic impoverishment). The design of "salutogenic" environments requires not only the elimination of negative stress inducing features, but also the addition of environmental enhancements, including such factors as increased personal control, contact with nature and daylight, aesthetically pleasing spaces, and spaces for relaxation alone or with others. Salutogenic environments also take into consideration positive psychosocial "fit," as well as functional fit between people and environments. At the heart of the current interest in the work environment are two major concerns: organizational productivity and employee well being.

A hierarchy for modeling high speed propulsion systems

NASA Technical Reports Server (NTRS)

Hartley, Tom T.; Deabreu, Alex

1991-01-01

General research efforts on reduced order propulsion models for control systems design are overviewed. Methods for modeling high speed propulsion systems are discussed including internal flow propulsion systems that do not contain rotating machinery such as inlets, ramjets, and scramjets. The discussion is separated into four sections: (1) computational fluid dynamics model for the entire nonlinear system or high order nonlinear models; (2) high order linearized model derived from fundamental physics; (3) low order linear models obtained from other high order models; and (4) low order nonlinear models. Included are special considerations on any relevant control system designs. The methods discussed are for the quasi-one dimensional Euler equations of gasdynamic flow. The essential nonlinear features represented are large amplitude nonlinear waves, moving normal shocks, hammershocks, subsonic combustion via heat addition, temperature dependent gases, detonation, and thermal choking.

Facility design consideration for continuous mix production of class 1.3 propellant

NASA Technical Reports Server (NTRS)

Williamson, K. L.; Schirk, P. G.

1994-01-01

In November of 1989, NASA awarded the Advanced Solid Rocket Motor (ASRM) contract to Lockheed Missiles and Space Company (LMSC) for production of advanced solid rocket motors using the continuous mix process. Aerojet ASRM division (AAD) was selected as the facility operator and RUST International Corporation provided the engineering, procurement, and construction management services. The continuous mix process mandates that the mix and cast facilities be 'close-coupled' along with the premix facilities, creating unique and challenging requirements for the facility designer. The classical approach to handling energetic materials-division into manageable quantities, segregation, and isolation-was not available due to these process requirements and quantities involved. This paper provides a description of the physical facilities, the continuous mix process, and discusses the monitoring and detection techniques used to mitigate hazards and prevent an incident.

Test plan : I-40 TTIS focus groups and personal interview

DOT National Transportation Integrated Search

1976-04-01

This provides specific design recommendations, design considerations, and construction techniques for the construction of lateral support systems and underpinning. The design considerations are presented for each technique or method (solider piles, s...

Students with Shunts: Program Considerations.

ERIC Educational Resources Information Center

French, Ron; And Others

1997-01-01

Examines how the medical condition of hydrocephalus can affect physical education students and physical education programs, and stresses the need to provide physical educators with information on students' medical conditions. Describes hydrocephalus and its treatment with ventricular peritoneal shunts, and offers suggestions on modifying…

12 CFR 1320.10 - Factors for consideration in designations.

Code of Federal Regulations, 2014 CFR

2014-01-01

... FINANCIAL MARKET UTILITIES Consultations, Determinations and Hearings § 1320.10 Factors for consideration in designations. In making any proposed or final determination with respect to whether a financial market utility... consideration: (a) The aggregate monetary value of transactions processed by the financial market utility...

12 CFR 1320.10 - Factors for consideration in designations.

Code of Federal Regulations, 2012 CFR

2012-01-01

... MARKET UTILITIES Consultations, Determinations and Hearings § 1320.10 Factors for consideration in designations. In making any proposed or final determination with respect to whether a financial market utility... consideration: (a) The aggregate monetary value of transactions processed by the financial market utility...

12 CFR 1320.10 - Factors for consideration in designations.

Code of Federal Regulations, 2013 CFR

2013-01-01

... MARKET UTILITIES Consultations, Determinations and Hearings § 1320.10 Factors for consideration in designations. In making any proposed or final determination with respect to whether a financial market utility... consideration: (a) The aggregate monetary value of transactions processed by the financial market utility...

Get Active Orlando: changing the built environment to increase physical activity.

PubMed

McCreedy, Malisa; Leslie, Jill G

2009-12-01

Active Living by Design's Get Active Orlando partnership (GAO) focused on downtown Orlando's Community Redevelopment Area, including the Parramore Heritage District, home to many low-income and ethnically diverse residents, including many seniors. The area had undergone substantial development, and GAO aimed to incorporate active living considerations into the city's changing landscape. Get Active Orlando conducted a baseline survey of all streets, sidewalks, and bicycle lanes in the project area and identified a sequence of plans and policies in which to incorporate changes identified in the assessment. To create more immediate opportunities for active living, the partnership initiated a senior walking program, a bicycle refurbishment and giveaway program, and community bicycle-riding events, and led a social-marketing campaign that emphasized simple lifestyle changes. Get Active Orlando influenced adoption of public policies supporting active living in Orlando, including the Downtown Transportation Plan, Streetscape Guidelines, Design Standards Review Checklist, and growth management policies. Establishment of the Mayor's Advisory Council on Active Living is testament to the heightened significance of active living in Orlando. Initial assessment data served as a strong platform for policy change. Creating connections across disciplines including land-use planning, transportation, public health, and economic development allowed GAO to secure substantial policy change to influence design of the built environment. Engaging community members, including youth, as leaders was an important factor in program success. The physical environment in Orlando's Community Redevelopment Area is beginning to change as a reflection of a new policy framework designed to support active living.

The effects of hands-free communication device systems: communication changes in hospital organizations

PubMed Central

Richardson, Joshua E; Ash, Joan S

2010-01-01

Objective To analyze the effects that hands-free communication device (HCD) systems have on healthcare organizations from multiple user perspectives. Design This exploratory qualitative study recruited 26 subjects from multiple departments in two research sites located in Portland, Oregon: an academic medical center and a community hospital. Interview and observation data were gathered January through March, 2007. Measurements Data were analyzed using a grounded theory approach. Because this study was exploratory, data were coded and patterns identified until overall themes ‘emerged’. Results Five themes arose: (1) Communication access—the perception that HCD systems provide fast and efficient communication that supports workflow; (2) Control—social and technical considerations associated with use of an HCD system; (3) Training—processes that should be used to improve use of the HCD system; (4) Organizational change—changes to organizational design and behavior caused by HCD system implementation; and (5) Environment and infrastructure—HCD system use within the context of physical workspaces. Conclusion HCD systems improve communication access but users experience challenges integrating the system into workflow. Effective HCD use depends on how well organizations train users, adapt to changes brought about by HCD systems, and integrate HCD systems into physical surroundings. PMID:20064808

Short-wavelength free-electron laser sources and science: a review.

PubMed

Seddon, E A; Clarke, J A; Dunning, D J; Masciovecchio, C; Milne, C J; Parmigiani, F; Rugg, D; Spence, J C H; Thompson, N R; Ueda, K; Vinko, S M; Wark, J S; Wurth, W

2017-11-01

This review is focused on free-electron lasers (FELs) in the hard to soft x-ray regime. The aim is to provide newcomers to the area with insights into: the basic physics of FELs, the qualities of the radiation they produce, the challenges of transmitting that radiation to end users and the diversity of current scientific applications. Initial consideration is given to FEL theory in order to provide the foundation for discussion of FEL output properties and the technical challenges of short-wavelength FELs. This is followed by an overview of existing x-ray FEL facilities, future facilities and FEL frontiers. To provide a context for information in the above sections, a detailed comparison of the photon pulse characteristics of FEL sources with those of other sources of high brightness x-rays is made. A brief summary of FEL beamline design and photon diagnostics then precedes an overview of FEL scientific applications. Recent highlights are covered in sections on structural biology, atomic and molecular physics, photochemistry, non-linear spectroscopy, shock physics, solid density plasmas. A short industrial perspective is also included to emphasise potential in this area.

The Use of 3D Printing Technology in the Ilizarov Method Treatment: Pilot Study.

PubMed

Burzyńska, Karolina; Morasiewicz, Piotr; Filipiak, Jarosław

2016-01-01

Significant developments in additive manufacturing technology have occurred in recent years. 3D printing techniques can also be helpful in the Ilizarov method treatment. The aim of this study was to evaluate the usefulness of 3D printing technology in the Ilizarov method treatment. Physical models of bones used to plan the spatial design of Ilizarov external fixator were manufactured by FDM (Fused Deposition Modeling) spatial printing technology. Bone models were made of poly(L-lactide) (PLA). Printed 3D models of both lower leg bones allow doctors to prepare in advance for the Ilizarov method treatment: detailed consideration of the spatial configuration of the external fixation, experimental assembly of the Ilizarov external fixator onto the physical models of bones prior to surgery, planning individual osteotomy level and Kirschner wires introduction sites. Printed 3D bone models allow for accurate preparation of the Ilizarov apparatus spatially matched to the size of the bones and prospective bone distortion. Employment of the printed 3D models of bone will enable a more precise design of the apparatus, which is especially useful in multiplanar distortion and in the treatment of axis distortion and limb length discrepancy in young children. In the course of planning the use of physical models manufactured with additive technology, attention should be paid to certain technical aspects of model printing that have an impact on the accuracy of mapping of the geometry and physical properties of the model. 3D printing technique is very useful in 3D planning of the Ilizarov method treatment.

Healthful environments for hospitalized infants.

PubMed

Marshall-Baker, Anna

2011-01-01

Medical and technological advances dominate the design of infant incubators because of their essential role in the survival of critically ill neonates. Yet other important design considerations, such as caregiver interaction, discomfort at bedside, and harmful materials, often are overlooked. The purpose of this paper is to consider the effects of existing incubator designs and to suggest criteria for the next generation of infant incubators. Incubators of the mid-1940s established an industry standard that exists to this day: portholes in an infant chamber positioned over a mechanical system, resting on top of storage cabinets or drawers. This design is unresponsive to many of the infants' needs and significantly influences parent/infant interaction. The physical effects and social barriers that the incubator presents to the health and well-being of infants are compounded by the use of unhealthful substances and materials such as formaldehyde. Collectively, these conditions call for an incubator that not only ameliorates physical and social obstacles, but also uses benign materials. Simple alterations to existing incubator design, such as introducing color and pattern, providing arm rests, and freeing space beneath the infant chamber to accommodate seated caregivers, would encourage more prolonged periods of contact with the infant occupants, thereby improving their behavioral organization and recovery. Replacing harmful materials with alternatives such as formaldehyde-free substrates in the cabinetry also will improve the developmental outcomes of the infant occupants. These types of recommended changes embrace the intent of the incubator to provide a controlled, secure environment while acknowledging that incubators are not merely medical equipment, but the living spaces of their infant occupants.

Linking Obesity Prevention and Mental Health Promotion to Address Health Disparities.

PubMed

Claydon, Elizabeth; Austin, Anna; Smith, Megan V

2016-05-01

Considerable racial health disparities exist, especially in mental health and obesity. However, few approaches exist to address obesity and mental health simultaneously in minority groups. An intervention to address mental health in a low-income, minority group of urban mothers was designed using results from a needs assessment. Participating women were asked to rank their top health concerns and personal goals. Along with mental health concerns and basic needs, the majority of mothers desired assistance with improving their physical well-being. These results are surprising, but lend credence to creating interventions that aim to address both mental health and obesity concerns simultaneously.

Feasibility of AN Ecrh System for Jet:. Plant Layout, Auxiliaries and Services

NASA Astrophysics Data System (ADS)

Lennholm, M.; Bouquey, F.; Braune, H.; Farthing, J.; Garavaglia, S.; Giruzzi, G.; Granucci, G.; Jennison, M.; Parkin, A.

2011-02-01

A study conducted over the last year to asses the desirability and feasibility of installing an ECRH system on the JET tokamak has concluded that such a system is indeed both desirable and feasible. Details of physics studies, launcher and transmission line design, and power supplies are presented elsewhere in these proceedings. This paper concentrates on the logistical implications of installing this system at JET. The paper addresses issues such as port allocation and plant location. The study has concluded that a new building will be needed to house the ECRH plant. Building layout proposals are presented together with considerations regarding the required auxiliary equipment.

Recommendations for Assessment of the Reliability, Sensitivity, and Validity of Data Provided by Wearable Sensors Designed for Monitoring Physical Activity

PubMed Central

2018-01-01

Although it is becoming increasingly popular to monitor parameters related to training, recovery, and health with wearable sensor technology (wearables), scientific evaluation of the reliability, sensitivity, and validity of such data is limited and, where available, has involved a wide variety of approaches. To improve the trustworthiness of data collected by wearables and facilitate comparisons, we have outlined recommendations for standardized evaluation. We discuss the wearable devices themselves, as well as experimental and statistical considerations. Adherence to these recommendations should be beneficial not only for the individual, but also for regulatory organizations and insurance companies. PMID:29712629

Intracavity adaptive optics. 1: Astigmatism correction performance.

PubMed

Spinhirne, J M; Anafi, D; Freeman, R H; Garcia, H R

1981-03-15

A detailed experimental study has been conducted on adaptive optical control methodologies inside a laser resonator. A comparison is presented of several optimization techniques using a multidither zonal coherent optical adaptive technique system within a laser resonator for the correction of astigmatism. A dramatic performance difference is observed when optimizing on beam quality compared with optimizing on power-in-the-bucket. Experimental data are also presented on proper selection criteria for dither frequencies when controlling phase front errors. The effects of hardware limitations and design considerations on the performance of the system are presented, and general conclusions and physical interpretations on the results are made when possible.

Ethical Design of Intelligent Assistive Technologies for Dementia: A Descriptive Review.

PubMed

Ienca, Marcello; Wangmo, Tenzin; Jotterand, Fabrice; Kressig, Reto W; Elger, Bernice

2017-09-22

The use of Intelligent Assistive Technology (IAT) in dementia care opens the prospects of reducing the global burden of dementia and enabling novel opportunities to improve the lives of dementia patients. However, with current adoption rates being reportedly low, the potential of IATs might remain under-expressed as long as the reasons for suboptimal adoption remain unaddressed. Among these, ethical and social considerations are critical. This article reviews the spectrum of IATs for dementia and investigates the prevalence of ethical considerations in the design of current IATs. Our screening shows that a significant portion of current IATs is designed in the absence of explicit ethical considerations. These results suggest that the lack of ethical consideration might be a codeterminant of current structural limitations in the translation of IATs from designing labs to bedside. Based on these data, we call for a coordinated effort to proactively incorporate ethical considerations early in the design and development of new products.

Human factors considerations in designing for infection prevention and control in neonatal care - findings from a pre-design inquiry.

PubMed

Trudel, Chantal; Cobb, Sue; Momtahan, Kathryn; Brintnell, Janet; Mitchell, Ann

2018-01-01

Qualitative data collection methods drawn from the early stages of human-centred design frameworks combined with thematic analysis were used to develop an understanding of infection prevention practice within an existing neonatal intensive care unit. Findings were used to generate a framework of understanding which in turn helped inform a baseline approach for future research and design development. The study revealed that a lack of clarity between infection transmission zones and a lack of design attributes needed to uphold infection prevention measures may be undermining healthcare workers' understanding and application of good practice. The issue may be further complicated by well-intentioned behavioural attitudes to meeting work objectives; undue influences from spatial constraints; the influence of inadvertent and excessive touch-based interactions; physical and/or cognitive exertion to maintain transmission barriers; and the impact of expanding job design and increased workload to supplement for lack of effective barriers. Practitioner Summary: Despite high hand hygiene compliance within a neonatal intensive care unit, healthcare workers expressed concerns about the unit design and infection prevention practice. Early inquiry methods from human-centred design and thematic analysis helped develop a framework to understand how design can be used to aid infection prevention.

Ergonomic Considerations for the Human Environment: Color Treatment, Lighting, and Furniture Selection.

ERIC Educational Resources Information Center

Robertson, Michelle M.

1992-01-01

Discusses ergonomic design considerations for library media centers. Specific design variables, including temperature and humidity, noise, illumination, color, and windows are discussed; and computer workstation design requirements are presented that address furniture and keyboard design, monitor and display features, software issues, and…

Using Smartphones to Collect Behavioral Data in Psychological Science: Opportunities, Practical Considerations, and Challenges

PubMed Central

Harari, Gabriella M.; Lane, Nicholas D.; Wang, Rui; Crosier, Benjamin S.; Campbell, Andrew T.; Gosling, Samuel D.

2017-01-01

Smartphones now offer the promise of collecting behavioral data unobtrusively, in situ, as it unfolds in the course of daily life. Data can be collected from the onboard sensors and other phone logs embedded in today’s off-the-shelf smartphone devices. These data permit fine-grained, continuous collection of people’s social interactions (e.g., speaking rates in conversation, size of social groups, calls, and text messages), daily activities (e.g., physical activity and sleep), and mobility patterns (e.g., frequency and duration of time spent at various locations). In this article, we have drawn on the lessons from the first wave of smartphone-sensing research to highlight areas of opportunity for psychological research, present practical considerations for designing smartphone studies, and discuss the ongoing methodological and ethical challenges associated with research in this domain. It is our hope that these practical guidelines will facilitate the use of smartphones as a behavioral observation tool in psychological science. PMID:27899727

Using Smartphones to Collect Behavioral Data in Psychological Science: Opportunities, Practical Considerations, and Challenges.

PubMed

Harari, Gabriella M; Lane, Nicholas D; Wang, Rui; Crosier, Benjamin S; Campbell, Andrew T; Gosling, Samuel D

2016-11-01

Smartphones now offer the promise of collecting behavioral data unobtrusively, in situ, as it unfolds in the course of daily life. Data can be collected from the onboard sensors and other phone logs embedded in today's off-the-shelf smartphone devices. These data permit fine-grained, continuous collection of people's social interactions (e.g., speaking rates in conversation, size of social groups, calls, and text messages), daily activities (e.g., physical activity and sleep), and mobility patterns (e.g., frequency and duration of time spent at various locations). In this article, we have drawn on the lessons from the first wave of smartphone-sensing research to highlight areas of opportunity for psychological research, present practical considerations for designing smartphone studies, and discuss the ongoing methodological and ethical challenges associated with research in this domain. It is our hope that these practical guidelines will facilitate the use of smartphones as a behavioral observation tool in psychological science. © The Author(s) 2016.

Education Affects Attitudes of Physical Therapy Providers toward People with Dementia

ERIC Educational Resources Information Center

Staples, William H.; Killian, Clyde B.

2012-01-01

A survey was sent to every skilled nursing home (N = 495) in Indiana regarding the demographics, education, and whether the severity of dementia impacts the attitudes of people in physical therapy practice. Physical therapists (PTs) and physical therapist assistants (PTAs) practicing in nursing homes spend considerable time (44.0%) working with…

The Short- and Long-Term Effects of Quality Physical Education

ERIC Educational Resources Information Center

Siegel, Donald

2005-01-01

The short- and long-term effects of quality physical education programs have been a subject of considerable debate by educational administrators and state legislators during the past decade. While physical educators have repeatedly demonstrated the importance of daily moderate and vigorous physical activity on the immediate health and wellbeing of…

Transonic Flutter Suppression Control Law Design, Analysis and Wind-Tunnel Results

NASA Technical Reports Server (NTRS)

Mukhopadhyay, Vivek

1999-01-01

The benchmark active controls technology and wind tunnel test program at NASA Langley Research Center was started with the objective to investigate the nonlinear, unsteady aerodynamics and active flutter suppression of wings in transonic flow. The paper will present the flutter suppression control law design process, numerical nonlinear simulation and wind tunnel test results for the NACA 0012 benchmark active control wing model. The flutter suppression control law design processes using classical, and minimax techniques are described. A unified general formulation and solution for the minimax approach, based on the steady state differential game theory is presented. Design considerations for improving the control law robustness and digital implementation are outlined. It was shown that simple control laws when properly designed based on physical principles, can suppress flutter with limited control power even in the presence of transonic shocks and flow separation. In wind tunnel tests in air and heavy gas medium, the closed-loop flutter dynamic pressure was increased to the tunnel upper limit of 200 psf. The control law robustness and performance predictions were verified in highly nonlinear flow conditions, gain and phase perturbations, and spoiler deployment. A non-design plunge instability condition was also successfully suppressed.

Evaluation of the Use of Remote Laboratories for Secondary School Science Education

NASA Astrophysics Data System (ADS)

Lowe, David; Newcombe, Peter; Stumpers, Ben

2013-06-01

Laboratory experimentation is generally considered central to science-based education. Allowing students to "experience" science through various forms of carefully designed practical work, including experimentation, is often claimed to support their learning and motivate their engagement while fulfilling specific curriculum requirements. However, logistical constraints (most especially related to funding) place significant limitations on the ability of schools to provide and maintain high-quality science laboratory experiences and equipment. One potential solution that has recently been the subject of growing interest is the use of remotely accessible laboratories to either supplant, or more commonly to supplement, conventional hands-on laboratories. Remote laboratories allow students and teachers to use high-speed networks, coupled with cameras, sensors, and controllers, to carry out experiments on real physical laboratory apparatus that is located remotely from the student. Research has shown that when used appropriately this can bring a range of potential benefits, including the ability to share resources across multiple institutions, support access to facilities that would otherwise be inaccessible for cost or technical reasons, and provide augmentation of the experimental experience. Whilst there has been considerable work on evaluating the use of remote laboratories within tertiary education, consideration of their role within secondary school science education is much more limited. This paper describes trials of the use of remote laboratories within secondary schools, reporting on the student and teacher reactions to their interactions with the laboratories. The paper concludes that remote laboratories can be highly beneficial, but considerable care must be taken to ensure that their design and delivery address a number of critical issues identified in this paper.

Rubber closures for freeze-dried products.

PubMed

Hopkins, G H

1976-10-01

Once a biological product has been developed to perform its required medical or pharmaceutical function, it is essential that a container-closure system by chosen which will preserve the efficacy of the product up to the point of administration. The general requirements applicable to proper closure function will be reviewed and the suitability of natural and synthetic elastomers to perform these functions will be discussed. The specialized application of elastomeric materials as closures for freeze-dried products presents additional requirements which are superimposed upon those previously discussed. The first of these unique considerations relates to the proper physical design which will permit the outgassing of water vapor during the sublimation step in the lyophilizing chamber. During this outgassing the design must also permit the closure to remain affixed in the neck while only partially inserted. Since these preparations are lyophilized because they are unstable in aqueous solutions, the elastomer used must constitute an effective barrier to the transmission of moisture vapor through the closure. The MVT and gas transmission properties of elastomers will be discussed. Special consideration will be given to the extremely low temperatures used in the sublimation, stoppering, and storage before use of lyophilized products. The phenomenon of glass transition points with different elastomers will be explained as its relation to satisfactory performance of the closure function at low temperatures.

Physical activity and low-back pain in schoolchildren.

PubMed

Skoffer, Birgit; Foldspang, Anders

2008-03-01

Design of the experiment is to study the cross-sectional sample with retrospective information. The objective is to identify the types of physical activity associated with the decreased occurrence of low-back pain (LBP) in schoolchildren. Physical activity may be hypothesized to possess a potential for LBP prevention. The possible connection between LBP and specific sports activities is however sparsely documented. A total of 546, 15- to 16-year-old schoolchildren filled a questionnaire on current physical activities and LBP occurrence and severity. In multiple logistic regressions, the association of LBP with exposure variables was corrected for body height and weight (data from school health service files) and for anthropometric and school furniture parameters. More than half of the children reported pain or discomfort in the low-back region during the preceding 3 months, and 1/4 experienced a decreased functioning or need of care because of LBP. LBP correlated with physical inactivity, e.g. time spent on homework and hours watching TV or video, and with a series of sports activities, e.g. jogging, handball playing and gymnastics. Among sports activities, only swimming and the number of hours per week participating in soccer were associated with a decreased LBP prevalence. With the exception of swimming and soccer, the types of sport reported by this schoolchild population do not offer themselves for consideration as tools for LBP prevention. Based on the associations found with indicators of physical inactivity, attempts to motivate the children to increase their general physical activity level should be considered for trial.

Sixty minutes of what? A developing brain perspective for activating children with an integrative exercise approach.

PubMed

Myer, Gregory D; Faigenbaum, Avery D; Edwards, Nicholas M; Clark, Joseph F; Best, Thomas M; Sallis, Robert E

2015-12-01

Current recommendations for physical activity in children overlook the critical importance of motor skill acquisition early in life. Instead, they focus on the quantitative aspects of physical activity (eg, accumulate 60 min of daily moderate to vigorous physical activity) and selected health-related components of physical fitness (eg, aerobic fitness, muscular strength, muscular endurance, flexibility and body composition). This focus on exercise quantity in youth may limit considerations of qualitative aspects of programme design which include (1) skill development, (2) socialisation and (3) enjoyment of exercise. The timing of brain development and associated neuroplasticity for motor skill learning makes the preadolescence period a critical time to develop and reinforce fundamental movement skills in boys and girls. Children who do not participate regularly in structured motor skill-enriched activities during physical education classes or diverse youth sports programmes may never reach their genetic potential for motor skill control which underlies sustainable physical fitness later in life. The goals of this review are twofold: (1) challenge current dogma that is currently focused on the quantitative rather than qualitative aspects of physical activity recommendations for youth and (2) synthesise the latest evidence regarding the brain and motor control that will provide the foundation for integrative exercise programming that provide a framework sustainable activity for life. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

Evolution of design considerations in complex craniofacial reconstruction using patient-specific implants.

PubMed

Peel, Sean; Bhatia, Satyajeet; Eggbeer, Dominic; Morris, Daniel S; Hayhurst, Caroline

2017-06-01

Previously published evidence has established major clinical benefits from using computer-aided design, computer-aided manufacturing, and additive manufacturing to produce patient-specific devices. These include cutting guides, drilling guides, positioning guides, and implants. However, custom devices produced using these methods are still not in routine use, particularly by the UK National Health Service. Oft-cited reasons for this slow uptake include the following: a higher up-front cost than conventionally fabricated devices, material-choice uncertainty, and a lack of long-term follow-up due to their relatively recent introduction. This article identifies a further gap in current knowledge - that of design rules, or key specification considerations for complex computer-aided design/computer-aided manufacturing/additive manufacturing devices. This research begins to address the gap by combining a detailed review of the literature with first-hand experience of interdisciplinary collaboration on five craniofacial patient case studies. In each patient case, bony lesions in the orbito-temporal region were segmented, excised, and reconstructed in the virtual environment. Three cases translated these digital plans into theatre via polymer surgical guides. Four cases utilised additive manufacturing to fabricate titanium implants. One implant was machined from polyether ether ketone. From the literature, articles with relevant abstracts were analysed to extract design considerations. In all, 19 frequently recurring design considerations were extracted from previous publications. Nine new design considerations were extracted from the case studies - on the basis of subjective clinical evaluation. These were synthesised to produce a design considerations framework to assist clinicians with prescribing and design engineers with modelling. Promising avenues for further research are proposed.

Optical performance of multifocal soft contact lenses via a single-pass method.

PubMed

Bakaraju, Ravi C; Ehrmann, Klaus; Falk, Darrin; Ho, Arthur; Papas, Eric

2012-08-01

A physical model eye capable of carrying soft contact lenses (CLs) was used as a platform to evaluate optical performance of several commercial multifocals (MFCLs) with high- and low-add powers and a single-vision control. Optical performance was evaluated at three pupil sizes, six target vergences, and five CL-correcting positions using a spatially filtered monochromatic (632.8 nm) light source. The various target vergences were achieved by using negative trial lenses. A photosensor in the retinal plane recorded the image point-spread that enabled the computation of visual Strehl ratios. The centration of CLs was monitored by an additional integrated en face camera. Hydration of the correcting lens was maintained using a humidity chamber and repeated instillations of rewetting saline drops. All the MFCLs reduced performance for distance but considerably improved performance along the range of distance to near target vergences, relative to the single-vision CL. Performance was dependent on add power, design, pupil, and centration of the correcting CLs. Proclear (D) design produced good performance for intermediate vision, whereas Proclear (N) design performed well at near vision (p < 0.05). AirOptix design exhibited good performance for distance and intermediate vision. PureVision design showed improved performance across the test vergences, but only for pupils ≥4 mm in diameter. Performance of Acuvue bifocal was comparable with other MFCLs, but only for pupils >4 mm in diameter. Acuvue Oasys bifocal produced performance comparable with single-vision CL for most vergences. Direct measurement of single-pass images at the retinal plane of a physical model eye used in conjunction with various MFCLs is demonstrated. This method may have utility in evaluating the relative effectiveness of commercial and prototype designs.

Design and application of multimegawatt X -band deflectors for femtosecond electron beam diagnostics

DOE PAGES

Dolgashev, Valery A.; Bowden, Gordon; Ding, Yuantao; ...

2014-10-02

Performance of the x-ray free electron laser Linac Coherent Light Source (LCLS) and the Facility for Advanced Accelerator Experimental Tests (FACET) is determined by the properties of their extremely short electron bunches. Multi-GeV electron bunches in both LCLS and FACET are less than 100 fs long. Optimization of beam properties and understanding of free-electron laser operation require electron beam diagnostics with time resolution of about 10 fs. We designed, built and commissioned a set of high frequency X-band deflectors which can measure the beam longitudinal space charge distribution and slice energy spread to better than 10 fs resolution at fullmore » LCLS energy (14 GeV), and with 70 fs resolution at full FACET energy (20 GeV). Use of high frequency and high gradient in these devices allows them to reach unprecedented performance. We report on the physics motivation, design considerations, operational configuration, cold tests, and typical results of the X-band deflector systems currently in use at SLAC.« less

Terror Weapons: The British Experience of Gas and Its Treatment in the First World War

PubMed Central

Jones, Edgar

2016-01-01

Chemical weapons accounted for only 1 per cent of the 750,000 British troops killed in the First World War and yet caused disproportionate casualties (estimated at 180,100). The considerable investment in the development of new toxins and methods of delivery was designed to maintain the elements of surprise and uncertainty as these accentuated their psychological effect. Soldiers were continually challenged on the battlefield by combinations of different types of agent designed to undermine their confidence in respirators, disorientate them, and erode their morale. At first, army doctors practised defensive medicine, invaliding their patients for protracted periods to the UK or base hospitals. By 1917, progressive study of the physical and psychological effects of different types of toxin allowed physicians to design new management strategies. Borrowing ideas from shell shock, specialist units were set up closer to the front line and medical officers taught to identify crucial points in the course of illness to accelerate recovery times and forestall the accretion of psychosomatic symptoms. PMID:27917027

Spectromicroscopic insights for rational design of redox-based memristive devices

PubMed Central

Baeumer, Christoph; Schmitz, Christoph; Ramadan, Amr H. H.; Du, Hongchu; Skaja, Katharina; Feyer, Vitaliy; Müller, Philipp; Arndt, Benedikt; Jia, Chun-Lin; Mayer, Joachim; De Souza, Roger A.; Michael Schneider, Claus; Waser, Rainer; Dittmann, Regina

2015-01-01

The demand for highly scalable, low-power devices for data storage and logic operations is strongly stimulating research into resistive switching as a novel concept for future non-volatile memory devices. To meet technological requirements, it is imperative to have a set of material design rules based on fundamental material physics, but deriving such rules is proving challenging. Here, we elucidate both switching mechanism and failure mechanism in the valence-change model material SrTiO3, and on this basis we derive a design rule for failure-resistant devices. Spectromicroscopy reveals that the resistance change during device operation and failure is indeed caused by nanoscale oxygen migration resulting in localized valence changes between Ti4+ and Ti3+. While fast reoxidation typically results in retention failure in SrTiO3, local phase separation within the switching filament stabilizes the retention. Mimicking this phase separation by intentionally introducing retention-stabilization layers with slow oxygen transport improves retention times considerably. PMID:26477940

Terror Weapons: The British Experience of Gas and Its Treatment in the First World War.

PubMed

Jones, Edgar

2014-07-01

Chemical weapons accounted for only 1 per cent of the 750,000 British troops killed in the First World War and yet caused disproportionate casualties (estimated at 180,100). The considerable investment in the development of new toxins and methods of delivery was designed to maintain the elements of surprise and uncertainty as these accentuated their psychological effect. Soldiers were continually challenged on the battlefield by combinations of different types of agent designed to undermine their confidence in respirators, disorientate them, and erode their morale. At first, army doctors practised defensive medicine, invaliding their patients for protracted periods to the UK or base hospitals. By 1917, progressive study of the physical and psychological effects of different types of toxin allowed physicians to design new management strategies. Borrowing ideas from shell shock, specialist units were set up closer to the front line and medical officers taught to identify crucial points in the course of illness to accelerate recovery times and forestall the accretion of psychosomatic symptoms.

Architectural design of a ground-based deep-space optical reception antenna

NASA Technical Reports Server (NTRS)

Kerr, E. L.

1989-01-01

An architectural design of a ground-based antenna (telescope) for receiving optical communications from deep space is presented. Physical and optical parameters, and their effect on the performance and cost considerations, are described. The channel capacity of the antenna is 100 kbits/s from Saturn and 5 Mbits/s from Mars. A novel sunshade is designed to permit optical communication even when the deep-space laser source is as close to the sun as 12 deg. Inserts in the tubes of the sunshade permit operations at solar elongations as small as 6 or 3 deg. The Nd:YAG source laser and the Fraunhofer filter (a narrow-band predetection optical filter) are tuned to match the Doppler shifts of the source and background. A typical Saturn-to-earth data link can reduce its source power requirement from 8.2 W to 2 W of laser output by employing a Fraunhofer filter instead of a conventional multilayer dielectric filter.

Predicting protein contact map using evolutionary and physical constraints by integer programming.

PubMed

Wang, Zhiyong; Xu, Jinbo

2013-07-01

Protein contact map describes the pairwise spatial and functional relationship of residues in a protein and contains key information for protein 3D structure prediction. Although studied extensively, it remains challenging to predict contact map using only sequence information. Most existing methods predict the contact map matrix element-by-element, ignoring correlation among contacts and physical feasibility of the whole-contact map. A couple of recent methods predict contact map by using mutual information, taking into consideration contact correlation and enforcing a sparsity restraint, but these methods demand for a very large number of sequence homologs for the protein under consideration and the resultant contact map may be still physically infeasible. This article presents a novel method PhyCMAP for contact map prediction, integrating both evolutionary and physical restraints by machine learning and integer linear programming. The evolutionary restraints are much more informative than mutual information, and the physical restraints specify more concrete relationship among contacts than the sparsity restraint. As such, our method greatly reduces the solution space of the contact map matrix and, thus, significantly improves prediction accuracy. Experimental results confirm that PhyCMAP outperforms currently popular methods no matter how many sequence homologs are available for the protein under consideration. http://raptorx.uchicago.edu.

Seismic hazard assessment: Issues and alternatives

USGS Publications Warehouse

Wang, Z.

2011-01-01

Seismic hazard and risk are two very important concepts in engineering design and other policy considerations. Although seismic hazard and risk have often been used inter-changeably, they are fundamentally different. Furthermore, seismic risk is more important in engineering design and other policy considerations. Seismic hazard assessment is an effort by earth scientists to quantify seismic hazard and its associated uncertainty in time and space and to provide seismic hazard estimates for seismic risk assessment and other applications. Although seismic hazard assessment is more a scientific issue, it deserves special attention because of its significant implication to society. Two approaches, probabilistic seismic hazard analysis (PSHA) and deterministic seismic hazard analysis (DSHA), are commonly used for seismic hazard assessment. Although PSHA has been pro-claimed as the best approach for seismic hazard assessment, it is scientifically flawed (i.e., the physics and mathematics that PSHA is based on are not valid). Use of PSHA could lead to either unsafe or overly conservative engineering design or public policy, each of which has dire consequences to society. On the other hand, DSHA is a viable approach for seismic hazard assessment even though it has been labeled as unreliable. The biggest drawback of DSHA is that the temporal characteristics (i.e., earthquake frequency of occurrence and the associated uncertainty) are often neglected. An alternative, seismic hazard analysis (SHA), utilizes earthquake science and statistics directly and provides a seismic hazard estimate that can be readily used for seismic risk assessment and other applications. ?? 2010 Springer Basel AG.

Impact of the physical environment in paediatric hospitals on health outcomes: a systematic review.

PubMed

Watts, Robin; Wilson, Sally

Nesmith identified two roles for the physical settings in which health care is provided. One is as a tool to support productivity and effectiveness and the second is as healer: "… they are an end in themselves - aiding in the healing and wellness process through psychological and physiological effect…" (p. 671). Research to confirm this statement has been slowly accumulating over the last two decades, but primarily in the area of adult care. Although there are a plethora of articles describing the various creative and innovative approaches to physical design in paediatric hospitals, very few of these innovations have been evaluated in terms of their impact on the health outcomes of children and their families. The objective of this review was to determine from the available evidence the impact of the physical paediatric hospital environment on health outcomes of children and adolescents. Using a defined search and retrieval method, a wide range of indexes of periodical articles were accessed for the period 1980 to 2008 including both health and architectural databases. Unpublished studies from 1991 were sought using a variety of sources including Dissertation Abstracts, Index to Theses, conference proceedings, research and clinical trials registers and web sites of relevant professional associations. The review considered studies using either quantitative or qualitative methodologies or mixed methods that assessed the impact of physical design elements of a paediatric hospital environment including architectural, interior design, ambient features and /or features that supported patient and family centred care. The primary outcomes of interest were clinical or psychological, with other outcomes of interest being patient - family perceptions, including safety and security. Each study was assessed independently by two reviewers prior to inclusion in the review using standardised critical appraisal instruments developed by the Joanna Briggs Institute. As both assessors were in agreement on all studies a third reviewer was not required. Data was extracted independently from each of the included studies by two reviewers using standardised critical appraisal instruments developed by the Joanna Briggs Institute. Again there were no disagreements between the reviewers in relation to the data extracted from the quantitative studies. Agreement was reached on the synthesis of the findings from the two qualitative studies through discussion. Given the differences in study design, interventions and outcome measures in the quantitative studies, statistical pooling of the results was not possible and the findings are presented in a narrative form. Eight studies were included in the review with five elements of physical design addressed. In the sub-topic of physical building structures, single room design for paediatric intensive care units significantly reduced nosocomial infections as did the addition of negative pressure ventilation to single rooms in an isolation unit. The one study on the effect of specially designed gardens found very low usage rates but children who did visit them were actively engaged with both natural and structural features. On the same theme of active engagement a play centre designed to encourage symbolic play generated statistically significantly more total play and less unoccupied time or wandering as well as the type of play it was designed to encourage. The one study on art did not demonstrate that nature art was effective in reducing stress in hospitalised children. In regard to adolescents, the two themes that emerged in regard to physical facilities from the two qualitative studies were ways of maximising normal life and ways of supporting coping with the illness through ward design. Given the small number of studies addressing five sub-topics, no firm conclusions can be drawn from the review. However the results suggest positive elements of physical design that could be considered for implementation to support a healing environment within paediatric hospitals or paediatric wards in general hospitals. The review clearly illustrates the need for more research in this area assessing the health outcomes of innovations in physical design in paediatric hospitals or units. There are numerous opportunities for multidisciplinary studies and in varying cultural contexts. This review suggests a number of aspects of physical design that can be implemented although cost and cultural appropriateness are a consideration in several cases. These include the use of single rooms with negative pressure ventilation to control cross infection; the provision of both private and 'public' space for adolescent inpatients with 'public' spaces including spaces for interaction just with other peers; the incorporation of interactive gardens, however small, designed for families and their use encouraged by staff; and specially designed play structures to encourage symbolic play.

Investigation of Engineering and Design Considerations in Selecting Conveyors for Densified Refuse-Derived Fuel (dRDF) and dRDF: Coal Mixtures.

DTIC Science & Technology

1981-08-01

or discharge paths of material over the end pulley of a conveyor are important to the proper design and function of discharge chutes , wear plates or...8217 ’iESL-TR-81-58 INVESTIGATION OF ENGINEERING AND DESIGN CONSIDERATIONS IN SELECTING CONVEYORS FOR DENSIFIED REFUSE-DERIVED FUEL (dRDF) AND dRDF: COAL...Engineering and Design Final Report Considerations in Selecting Conveyors for JUN 1980 - SEP 1981 Densified Refuse-Derived Fuel (dRDF) and 6. PERFORMING ORG

Lunar Module ECS (Environmental Control System) - Design Considerations and Failure Modes. Part 1

NASA Technical Reports Server (NTRS)

Interbartolo, Michael

2009-01-01

Design considerations and failure modes for the Lunar Module (LM) Environmental Control System (ECS) are described. An overview of the the oxygen supply and cabin pressurization, atmosphere revitalization, water management and heat transport systems are provided. Design considerations including reliability, flight instrumentation, modularization and the change to the use of batteries instead of fuel cells are discussed. A summary is provided for the LM ECS general testing regime.

Design and analysis of a keel latch for use on the Hubble Space Telescope

NASA Technical Reports Server (NTRS)

Calvert, John; Stinson, Melanie

1986-01-01

The mechanical design of the keel latch is discussed, as well as the stress analysis of the keel latch. Background information; mechanical design requirements; some of the initial design considerations; the design considerations that led to the selection of the final design; the mechanics of the final design; testing that has been and will be accomplished to verify that design requirements have been met; and future tests are discussed.

Solar Design Workbook

DOE Office of Scientific and Technical Information (OSTI.GOV)

Franta, G.; Baylin, F.; Crowther, R.

1981-06-01

This Solar Design Workbook presents solar building design applications for commercial buildir^s. The book is divided into four sections. The first section describes the variety of solar applications in buildings including conservation aspects, solar fundamentals, passive systems, active systems, daylighting, and other solar options. Solar system design evaluation techniques including considerations for building energy requirements, passive systems, active systems, and economics are presented in Section II. The third section attempts to assist the designer in the building design process for energy conservation and solar applications including options and considerations for pre-design, design, and post-design phases. The information required for themore » solar design proee^ has not been fully developed at this time. Therefore, Section III is incomplete, but an overview of the considerations with some of the design proces elements is presented. Section IV illustrates ease studies that utilize solar applications in the building design.« less

Particle Accelerators Test Cosmological Theory.

ERIC Educational Resources Information Center

Schramm, David N.; Steigman, Gary

1988-01-01

Discusses the symbiotic relationship of cosmology and elementary-particle physics. Presents a brief overview of particle physics. Explains how cosmological considerations set limits on the number of types of elementary particles. (RT)

Parameter design considerations for an oscillator IR-FEL

NASA Astrophysics Data System (ADS)

Jia, Qi-Ka

2017-01-01

An infrared oscillator FEL user facility will be built at the National Synchrotron Radiation Laboratory at in Hefei, China. In this paper, the parameter design of the oscillator FEL is discussed, and some original relevant approaches and expressions are presented. Analytic formulae are used to estimate the optical field gain and saturation power for the preliminary design. By considering both physical and technical constraints, the relation of the deflection parameter K to the undulator period is analyzed. This helps us to determine the ranges of the magnetic pole gap, the electron energy and the radiation wavelength. The relations and design of the optical resonator parameters are analyzed. Using dimensionless quantities, the interdependences between the radii of curvature of the resonator mirror and the various parameters of the optical resonator are clearly demonstrated. The effect of the parallel-plate waveguide is analyzed for the far-infrared oscillator FEL. The condition of the necessity of using a waveguide and the modified filling factor in the case of the waveguide are given, respectively. Supported by National Nature Science Foundation of China (21327901, 11375199)

Scramjet fuel injector design parameters and considerations: Development of a two-dimensional tangential fuel injector with constant pressure at the flame

NASA Technical Reports Server (NTRS)

Agnone, A. M.

1972-01-01

The factors affecting a tangential fuel injector design for scramjet operation are reviewed and their effect on the efficiency of the supersonic combustion process is evaluated using both experimental data and theoretical predictions. A description of the physical problem of supersonic combustion and method of analysis is followed by a presentation and evaluation of some standard and exotic types of fuel injectors. Engineering fuel injector design criteria and hydrogen ignition schemes are presented along with a cursory review of available experimental data. A two-dimensional tangential fuel injector design is developed using analyses as a guide in evaluating the effects on the combustion process of various initial and boundary conditions including splitter plate thickness, injector wall temperature, pressure gradients, etc. The fuel injector wall geometry is shaped so as to maintain approximately constant pressure at the flame as required by a cycle analysis. A viscous characteristics program which accounts for lateral as well as axial pressure variations due to the mixing and combustion process is used in determining the wall geometry.

Telerehabilitation store and forward applications: a review of applications and privacy considerations in physical and occupational therapy practice.

PubMed

Peterson, Christopher; Watzlaf, Valerie

2014-01-01

An overview of store and forward applications commonly used in physical and occupational therapy practice is reviewed with respect to regulation, privacy, security, and clinical applications. A privacy and security checklist provides a clear reference of pertinent regulatory issues regarding these software applications. A case study format is used to highlight clinical applications of store and forward software features. Important considerations of successful implementation of store and forward applications are also identified and discussed.

A novel compact compliant actuator design for rehabilitation robots.

PubMed

Yu, Haoyong; Huang, Sunan; Thakor, Nitish V; Chen, Gong; Toh, Siew-Lok; Sta Cruz, Manolo; Ghorbel, Yassine; Zhu, Chi

2013-06-01

Rehabilitation robots have direct physical interaction with human body. Ideally, actuators for rehabilitation robots should be compliant, force controllable, and back drivable due to safety and control considerations. Various designs of Series Elastic Actuators (SEA) have been developed for these applications. However, current SEA designs face a common performance limitation due to the compromise on the spring stiffness selection. This paper presents a novel compact compliant force control actuator design for portable rehabilitation robots to overcome the performance limitations in current SEAs. Our design consists of a servomotor, a ball screw, a torsional spring between the motor and the ball screw, and a set of translational springs between the ball screw nut and the external load. The soft translational springs are used to handle the low force operation and reduce output impedance, stiction, and external shock load. The torsional spring, being in the high speed range, has high effective stiffness and improves the system bandwidth in large force operation when the translational springs are fully compressed. This design is also more compact due to the smaller size of the springs. We explain the construction and the working principle of our new design, followed by the dynamic modeling and analysis of the actuator. We also show the preliminary testing results of a prototype actuator designed for a lower limb exoskeleton for gait rehabilitation.

Tungsten fiber reinforced superalloy composite high temperature component design considerations

NASA Technical Reports Server (NTRS)

Winsa, E. A.

1982-01-01

Tungsten fiber reinforced superalloy composites (TFRS) are intended for use in high temperature turbine components. Current turbine component design methodology is based on applying the experience, sometimes semiempirical, gained from over 30 years of superalloy component design. Current composite component design capability is generally limited to the methodology for low temperature resin matrix composites. Often the tendency is to treat TFRS as just another superalloy or low temperature composite. However, TFRS behavior is significantly different than that of superalloys, and the high environment adds consideration not common in low temperature composite component design. The methodology used for preliminary design of TFRS components are described. Considerations unique to TFRS are emphasized.

Engaging Students in Physical Education: Key Challenges and Opportunities for Physical Educators in Urban Settings

ERIC Educational Resources Information Center

Sliwa, Sarah; Nihiser, Allison; Lee, Sarah; McCaughtry, Nathan; Culp, Brian; Michael, Shannon

2017-01-01

In October 2009, "JOPERD" published a special issue about "Engaging Urban Youths in Physical Education and Physical Activity." Seven years later, many of the considerations mentioned remain relevant, such as large class sizes, limited access to equipment, and the lack of a dedicated gymnasium or outdoor space. These structural…

An Analysis of Middle School Students Physical Education Physical Activity Preferences

ERIC Educational Resources Information Center

Hill, Grant; Hannon, James C.

2008-01-01

The idea of providing student's choice over curricular offerings in physical education has gained a considerable amount of attention in recent years. The purpose of this study was to determine which physical education activities middle school students would like to have included in the yearly curriculum and if there were differences in responses…

Validation of newly developed and redesigned key indicator methods for assessment of different working conditions with physical workloads based on mixed-methods design: a study protocol

PubMed Central

Liebers, Falk; Brandstädt, Felix; Schust, Marianne; Serafin, Patrick; Schäfer, Andreas; Gebhardt, Hansjürgen; Hartmann, Bernd; Steinberg, Ulf

2017-01-01

Introduction The impact of work-related musculoskeletal disorders is considerable. The assessment of work tasks with physical workloads is crucial to estimate the work-related health risks of exposed employees. Three key indicator methods are available for risk assessment regarding manual lifting, holding and carrying of loads; manual pulling and pushing of loads; and manual handling operations. Three further KIMs for risk assessment regarding whole-body forces, awkward body postures and body movement have been developed de novo. In addition, the development of a newly drafted combined method for mixed exposures is planned. All methods will be validated regarding face validity, reliability, convergent validity, criterion validity and further aspects of utility under practical conditions. Methods and analysis As part of the joint project MEGAPHYS (multilevel risk assessment of physical workloads), a mixed-methods study is being designed for the validation of KIMs and conducted in companies of different sizes and branches in Germany. Workplaces are documented and analysed by observations, applying KIMs, interviews and assessment of environmental conditions. Furthermore, a survey among the employees at the respective workplaces takes place with standardised questionnaires, interviews and physical examinations. It is intended to include 1200 employees at 120 different workplaces. For analysis of the quality criteria, recommendations of the COSMIN checklist (COnsensus-based Standards for the selection of health Measurement INstruments) will be taken into account. Ethics and dissemination The study was planned and conducted in accordance with the German Medical Professional Code and the Declaration of Helsinki as well as the German Federal Data Protection Act. The design of the study was approved by ethics committees. We intend to publish the validated KIMs in 2018. Results will be published in peer-reviewed journals, presented at international meetings and disseminated to actual users for practical application. PMID:28827239

Validation of newly developed and redesigned key indicator methods for assessment of different working conditions with physical workloads based on mixed-methods design: a study protocol.

PubMed

Klussmann, Andre; Liebers, Falk; Brandstädt, Felix; Schust, Marianne; Serafin, Patrick; Schäfer, Andreas; Gebhardt, Hansjürgen; Hartmann, Bernd; Steinberg, Ulf

2017-08-21

The impact of work-related musculoskeletal disorders is considerable. The assessment of work tasks with physical workloads is crucial to estimate the work-related health risks of exposed employees. Three key indicator methods are available for risk assessment regarding manual lifting, holding and carrying of loads; manual pulling and pushing of loads; and manual handling operations. Three further KIMs for risk assessment regarding whole-body forces, awkward body postures and body movement have been developed de novo. In addition, the development of a newly drafted combined method for mixed exposures is planned. All methods will be validated regarding face validity, reliability, convergent validity, criterion validity and further aspects of utility under practical conditions. As part of the joint project MEGAPHYS (multilevel risk assessment of physical workloads), a mixed-methods study is being designed for the validation of KIMs and conducted in companies of different sizes and branches in Germany. Workplaces are documented and analysed by observations, applying KIMs, interviews and assessment of environmental conditions. Furthermore, a survey among the employees at the respective workplaces takes place with standardised questionnaires, interviews and physical examinations. It is intended to include 1200 employees at 120 different workplaces. For analysis of the quality criteria, recommendations of the COSMIN checklist (COnsensus-based Standards for the selection of health Measurement INstruments) will be taken into account. The study was planned and conducted in accordance with the German Medical Professional Code and the Declaration of Helsinki as well as the German Federal Data Protection Act. The design of the study was approved by ethics committees. We intend to publish the validated KIMs in 2018. Results will be published in peer-reviewed journals, presented at international meetings and disseminated to actual users for practical application. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Design of physical and logical topologies with fault-tolerant ability in wavelength-routed optical network

NASA Astrophysics Data System (ADS)

Chen, Chunfeng; Liu, Hua; Fan, Ge

2005-02-01

In this paper we consider the problem of designing a network of optical cross-connects(OXCs) to provide end-to-end lightpath services to label switched routers (LSRs). Like some previous work, we select the number of OXCs as our objective. Compared with the previous studies, we take into account the fault-tolerant characteristic of logical topology. First of all, using a Prufer number randomly generated, we generate a tree. By adding some edges to the tree, we can obtain a physical topology which consists of a certain number of OXCs and fiber links connecting OXCs. It is notable that we for the first time limit the number of layers of the tree produced according to the method mentioned above. Then we design the logical topologies based on the physical topologies mentioned above. In principle, we will select the shortest path in addition to some consideration on the load balancing of links and the limitation owing to the SRLG. Notably, we implement the routing algorithm for the nodes in increasing order of the degree of the nodes. With regarding to the problem of the wavelength assignment, we adopt the heuristic algorithm of the graph coloring commonly used. It is clear our problem is computationally intractable especially when the scale of the network is large. We adopt the taboo search algorithm to find the near optimal solution to our objective. We present numerical results for up to 1000 LSRs and for a wide range of system parameters such as the number of wavelengths supported by each fiber link and traffic. The results indicate that it is possible to build large-scale optical networks with rich connectivity in a cost-effective manner, using relatively few but properly dimensioned OXCs.

Human Behavior and Environmental Sustainability: promoting a pro-environmental behavior by harnessing the social, psychological and physical influences of the built environment

NASA Astrophysics Data System (ADS)

Abusafieh, Shaden; Razem, Maiss

2017-11-01

Recently, technological advancements in the sustainable design field have allowed us to reduce the ecological impact of the built environment, to reduce consumption of non-renewable resources, to create healthy environments and in some cases may even rehabilitate the ecosystem. Nevertheless, several studies have been carried out showing that sustainable technology does not automatically lead to environmentally friendly behaviors in its users. Various environmental problems threaten environmental sustainability and many of these problems are rooted in human behavior. Unfortunately, there is a lack in studies which take into consideration the human behavior influences within a sustainable built environment. We believe that the built environment should be used to support human goals and requirements, but at the same time we should consider it as a context in which human values and behaviors are cultivated. This research aimed to help in promoting environmental sustainability by using architectural design in changing relevant human behavior toward an environmentally friendly behavior. In order to achieve this, the research adopted Environment-centered Approach to gain more acute perspective into the relationship between the physical environment and human behavior, focusing on social, psychological and physical influences of the built environment. It appears that environmental psychology's merits have high potential in changing behavior within the built environment. The research provides a systematic approach for selecting, assessing, evaluating the behaviors to be changed and the factors that determine them. Furthermore, this approach helps in choosing the best interventions that could be applied in built environment to encourage such a sustainable behavior. This study tried to construct an agenda for further researches to find particular architectural design elements and strategies that we can harness to develop a pro-environment human behavior.

Probe interface design consideration. [for interplanetary spacecraft missions

NASA Technical Reports Server (NTRS)

Casani, E. K.

1974-01-01

Interface design between a probe and a spacecraft requires not only technical considerations but also management planning and mission analysis interactions. Two further aspects of importance are the flyby versus the probe trade-off, and the relay link design and data handling optimization.

Effect of exercise referral schemes in primary care on physical activity and improving health outcomes: systematic review and meta-analysis

PubMed Central

Taylor, A H; Fox, K R; Hillsdon, M; Anokye, N; Campbell, J L; Foster, C; Green, C; Moxham, T; Mutrie, N; Searle, J; Trueman, P; Taylor, R S

2011-01-01

Objective To assess the impact of exercise referral schemes on physical activity and health outcomes. Design Systematic review and meta-analysis. Data sources Medline, Embase, PsycINFO, Cochrane Library, ISI Web of Science, SPORTDiscus, and ongoing trial registries up to October 2009. We also checked study references. Study selection Design: randomised controlled trials or non-randomised controlled (cluster or individual) studies published in peer review journals. Population: sedentary individuals with or without medical diagnosis. Exercise referral schemes defined as: clear referrals by primary care professionals to third party service providers to increase physical activity or exercise, physical activity or exercise programmes tailored to individuals, and initial assessment and monitoring throughout programmes. Comparators: usual care, no intervention, or alternative exercise referral schemes. Results Eight randomised controlled trials met the inclusion criteria, comparing exercise referral schemes with usual care (six trials), alternative physical activity intervention (two), and an exercise referral scheme plus a self determination theory intervention (one). Compared with usual care, follow-up data for exercise referral schemes showed an increased number of participants who achieved 90-150 minutes of physical activity of at least moderate intensity per week (pooled relative risk 1.16, 95% confidence intervals 1.03 to 1.30) and a reduced level of depression (pooled standardised mean difference −0.82, −1.28 to −0.35). Evidence of a between group difference in physical activity of moderate or vigorous intensity or in other health outcomes was inconsistent at follow-up. We did not find any difference in outcomes between exercise referral schemes and the other two comparator groups. None of the included trials separately reported outcomes in individuals with specific medical diagnoses.Substantial heterogeneity in the quality and nature of the exercise referral schemes across studies might have contributed to the inconsistency in outcome findings. Conclusions Considerable uncertainty remains as to the effectiveness of exercise referral schemes for increasing physical activity, fitness, or health indicators, or whether they are an efficient use of resources for sedentary people with or without a medical diagnosis. PMID:22058134

Effect of workplace- versus home-based physical exercise on pain in healthcare workers: study protocol for a single blinded cluster randomized controlled trial

PubMed Central

2014-01-01

Background The prevalence and consequences of musculoskeletal pain is considerable among healthcare workers, allegedly due to high physical work demands of healthcare work. Previous investigations have shown promising results of physical exercise for relieving pain among different occupational groups, but the question remains whether such physical exercise should be performed at the workplace or conducted as home-based exercise. Performing physical exercise at the workplace together with colleagues may be more motivating for some employees and thus increase adherence. On the other hand, physical exercise performed during working hours at the workplace may be costly for the employers in terms of time spend. Thus, it seems relevant to compare the efficacy of workplace- versus home-based training on musculoskeletal pain. This study is intended to investigate the effect of workplace-based versus home-based physical exercise on musculoskeletal pain among healthcare workers. Methods/Design This study was designed as a cluster randomized controlled trial performed at 3 hospitals in Copenhagen, Denmark. Clusters are hospital departments and hospital units. Cluster randomization was chosen to increase adherence and avoid contamination between interventions. Two hundred healthcare workers from 18 departments located at three different hospitals is allocated to 10 weeks of 1) workplace based physical exercise performed during working hours (using kettlebells, elastic bands and exercise balls) for 5 × 10 minutes per week and up to 5 group-based coaching sessions, or 2) home based physical exercise performed during leisure time (using elastic bands and body weight exercises) for 5 × 10 minutes per week. Both intervention groups will also receive ergonomic instructions on patient handling and use of lifting aides etc. Inclusion criteria are female healthcare workers working at a hospital. Average pain intensity (VAS scale 0-10) of the back, neck and shoulder (primary outcome) and physical exertion during work, social capital and work ability (secondary outcomes) is assessed at baseline and 10-week follow-up. Further, postural balance and mechanical muscle function is assessed during clinical examination at baseline and follow-up. Discussion This cluster randomized trial will investigate the change in self-rated average pain intensity in the back, neck and shoulder after either 10 weeks of physical exercise at the workplace or at home. Trial registration ClinicalTrials.gov (NCT01921764). PMID:24708570

Particulate Matter Filtration Design Considerations for Crewed Spacecraft Life Support Systems

NASA Technical Reports Server (NTRS)

Agui, Juan H.; Vijayakumar, R.; Perry, Jay L.

2016-01-01

Particulate matter filtration is a key component of crewed spacecraft cabin ventilation and life support system (LSS) architectures. The basic particulate matter filtration functional requirements as they relate to an exploration vehicle LSS architecture are presented. Particulate matter filtration concepts are reviewed and design considerations are discussed. A concept for a particulate matter filtration architecture suitable for exploration missions is presented. The conceptual architecture considers the results from developmental work and incorporates best practice design considerations.

Mapping the Prevalence of Physical Inactivity in U.S. States, 1984-2015.

PubMed

An, Ruopeng; Xiang, Xiaoling; Yang, Yan; Yan, Hai

2016-01-01

Physical inactivity is a leading cause of morbidity, disability and premature mortality in the U.S. and worldwide. This study aimed to map the prevalence of physical inactivity across U.S. states over the past three decades, and estimate the over-time adjusted changes in the prevalence of physical inactivity in each state. Individual-level data (N = 6,701,954) were taken from the 1984-2015 Behavioral Risk Factor Surveillance System (BRFSS), an annually repeated cross-sectional survey of state-representative adult population. Prevalence of self-reported leisure-time physical inactivity was estimated by state and survey year, accounting for the BRFSS sampling design. Logistic regressions were performed to estimate the changes in the prevalence of physical inactivity over the study period for each state, adjusting for individual characteristics including sex, age, race/ethnicity, education, marital status, and employment status. The prevalence of leisure-time physical inactivity varied substantially across states and survey years. In general, the adjusted prevalence of physical inactivity gradually declined over the past three decades in a majority of states. However, a substantial proportion of American adults remain physically inactive. Among the 50 states and District of Columbia, 45 had over a fifth of their adult population without any leisure-time physical activity, and 8 had over 30% without physical activity in 2015. Moreover, the adjusted prevalence of physical inactivity in several states (Arizona, North Carolina, North Dakota, Utah, West Virginia, and Wyoming) remained largely unchanged or even increased (Minnesota and Ohio) over the study period. Although the prevalence of physical inactivity declined over the past three decades in a majority of states, the rates remain substantially high and vary considerably across states. Closely monitoring and tracking physical activity level using the state physical activity maps can help guide policy and program development to promote physical activity and reduce the burden of chronic disease.

Mapping the Prevalence of Physical Inactivity in U.S. States, 1984-2015

PubMed Central

Xiang, Xiaoling; Yang, Yan; Yan, Hai

2016-01-01

Background Physical inactivity is a leading cause of morbidity, disability and premature mortality in the U.S. and worldwide. This study aimed to map the prevalence of physical inactivity across U.S. states over the past three decades, and estimate the over-time adjusted changes in the prevalence of physical inactivity in each state. Methods Individual-level data (N = 6,701,954) were taken from the 1984–2015 Behavioral Risk Factor Surveillance System (BRFSS), an annually repeated cross-sectional survey of state-representative adult population. Prevalence of self-reported leisure-time physical inactivity was estimated by state and survey year, accounting for the BRFSS sampling design. Logistic regressions were performed to estimate the changes in the prevalence of physical inactivity over the study period for each state, adjusting for individual characteristics including sex, age, race/ethnicity, education, marital status, and employment status. Results The prevalence of leisure-time physical inactivity varied substantially across states and survey years. In general, the adjusted prevalence of physical inactivity gradually declined over the past three decades in a majority of states. However, a substantial proportion of American adults remain physically inactive. Among the 50 states and District of Columbia, 45 had over a fifth of their adult population without any leisure-time physical activity, and 8 had over 30% without physical activity in 2015. Moreover, the adjusted prevalence of physical inactivity in several states (Arizona, North Carolina, North Dakota, Utah, West Virginia, and Wyoming) remained largely unchanged or even increased (Minnesota and Ohio) over the study period. Conclusions Although the prevalence of physical inactivity declined over the past three decades in a majority of states, the rates remain substantially high and vary considerably across states. Closely monitoring and tracking physical activity level using the state physical activity maps can help guide policy and program development to promote physical activity and reduce the burden of chronic disease. PMID:27959906

Fluctuations in energy loss and their implications for dosimetry and radiobiology

NASA Technical Reports Server (NTRS)

Baily, N. A.; Steigerwalt, J. E.

1972-01-01

Serious consideration of the physics of energy deposition indicates that a fundamental change in the interpretation of absorbed dose is required at least for considerations of effects in biological systems. In addition, theoretical approaches to radiobiology and microdosimetry seem to require statistical considerations incorporating frequency distributions of the magnitude of the event sizes within the volume of interest.

Design and life-cycle considerations for unconventional-reservoir wells

DOE Office of Scientific and Technical Information (OSTI.GOV)

Miskimins, J.L.

2009-05-15

This paper provides an overview of design and life-cycle considerations for certain unconventional-reservoir wells. An overview of unconventional-reservoir definitions is provided. Well design and life-cycle considerations are addressed from three aspects: upfront reservoir development, initial well completion, and well-life and long-term considerations. Upfront-reservoir-development issues discussed include well spacing, well orientation, reservoir stress orientations, and tubular metallurgy. Initial-well-completion issues include maximum treatment pressures and rates, treatment diversion, treatment staging, flowback and cleanup, and dewatering needs. Well-life and long-term discussions include liquid loading, corrosion, refracturing and associated fracture reorientation, and the cost of abandonment. These design considerations are evaluated with case studiesmore » for five unconventional-reservoir types: shale gas (Barnett shale), tight gas (Jonah feld), tight oil (Bakken play), coalbed methane (CBM) (San Juan basin), and tight heavy oil (Lost Hills field). In evaluating the life cycle and design of unconventional-reservoir wells, 'one size' does not fit all and valuable knowledge and a shortening of the learning curve can be achieved for new developments by studying similar, more-mature fields.« less

Second Insulin Pump Safety Meeting: Summary Report

PubMed Central

Zhang, Yi; Jones, Paul L.; Klonoff, David C.

2010-01-01

Diabetes Technology Society facilitated a second meeting of insulin pump experts at Mills-Peninsula Health Services, San Mateo, California on November 4, 2009, at the request of the Food and Drug Administration, Center for Devices and Radiological Health, Office of Science and Engineering Laboratories. The first such meeting was held in Bethesda, Maryland, on November 12, 2008. The group of physicians, nurses, diabetes educators, and engineers from across the United States discussed safety issues in insulin pump therapy and recommended adjustments to current insulin pump design and use to enhance overall safety. The meeting discussed safety issues in the context of pump operation; software; hardware; physical structure; electrical, biological, and chemical considerations; use; and environment from engineering, medical, nursing, and pump/user perspectives. There was consensus among meeting participants that insulin pump designs have made great progress in improving the quality of life of people with diabetes, but much more remains to be done. PMID:20307411

Experimental Identification and Characterization of Multirotor UAV Propulsion

NASA Astrophysics Data System (ADS)

Kotarski, Denis; Krznar, Matija; Piljek, Petar; Simunic, Nikola

2017-07-01

In this paper, an experimental procedure for the identification and characterization of multirotor Unmanned Aerial Vehicle (UAV) propulsion is presented. Propulsion configuration needs to be defined precisely in order to achieve required flight performance. Based on the accurate dynamic model and empirical measurements of multirotor propulsion physical parameters, it is possible to design diverse configurations with different characteristics for various purposes. As a case study, we investigated design considerations for a micro indoor multirotor which is suitable for control algorithm implementation in structured environment. It consists of open source autopilot, sensors for indoor flight, “take off the shelf” propulsion components and frame. The series of experiments were conducted to show the process of parameters identification and the procedure for analysis and propulsion characterization. Additionally, we explore battery performance in terms of mass and specific energy. Experimental results show identified and estimated propulsion parameters through which blade element theory is verified.

Superconducting magnet development for tokamaks and mirrors: a technical assessment

DOE Office of Scientific and Technical Information (OSTI.GOV)

Laverick, C.; Jacobs, R. B.; Boom, R. W.

1977-11-01

The role of superconducting magnets in Magnetic Fusion Energy Research and Development is assessed from a consideration of program plans and schedules, the present status of the programs and the research and development suggestions arising from recent studies and workshops. A principal conclusion is that the large superconducting magnet systems needed for commercial magnetic fusion reactors can be constructed. However such magnets working under severe conditions, with increasingly stringent reliability, safety and cost restrictions can never be built unless experience is first gained in a number of important installations designed to prove physics and technology steps on the way tomore » commercial power demonstration. The immediate problem is to design a technology program in the absence of definite device needs and specifications, giving a priority weighting to the multiplicity of good, high quality development program suggestions when all proposals cannot be supported.« less

Adaptation of sensor morphology: an integrative view of perception from biologically inspired robotics perspective

PubMed Central

Nurzaman, Surya G.

2016-01-01

Sensor morphology, the morphology of a sensing mechanism which plays a role of shaping the desired response from physical stimuli from surroundings to generate signals usable as sensory information, is one of the key common aspects of sensing processes. This paper presents a structured review of researches on bioinspired sensor morphology implemented in robotic systems, and discusses the fundamental design principles. Based on literature review, we propose two key arguments: first, owing to its synthetic nature, biologically inspired robotics approach is a unique and powerful methodology to understand the role of sensor morphology and how it can evolve and adapt to its task and environment. Second, a consideration of an integrative view of perception by looking into multidisciplinary and overarching mechanisms of sensor morphology adaptation across biology and engineering enables us to extract relevant design principles that are important to extend our understanding of the unfinished concepts in sensing and perception. PMID:27499843

Supersonic Retropropulsion Flight Test Concepts

NASA Technical Reports Server (NTRS)

Post, Ethan A.; Dupzyk, Ian C.; Korzun, Ashley M.; Dyakonov, Artem A.; Tanimoto, Rebekah L.; Edquist, Karl T.

2011-01-01

NASA's Exploration Technology Development and Demonstration Program has proposed plans for a series of three sub-scale flight tests at Earth for supersonic retropropulsion, a candidate decelerator technology for future, high-mass Mars missions. The first flight test in this series is intended to be a proof-of-concept test, demonstrating successful initiation and operation of supersonic retropropulsion at conditions that replicate the relevant physics of the aerodynamic-propulsive interactions expected in flight. Five sub-scale flight test article concepts, each designed for launch on sounding rockets, have been developed in consideration of this proof-of-concept flight test. Commercial, off-the-shelf components are utilized as much as possible in each concept. The design merits of the concepts are compared along with their predicted performance for a baseline trajectory. The results of a packaging study and performance-based trade studies indicate that a sounding rocket is a viable launch platform for this proof-of-concept test of supersonic retropropulsion.

Development of an Integrated Human Factors Toolkit

NASA Technical Reports Server (NTRS)

Resnick, Marc L.

2003-01-01

An effective integration of human abilities and limitations is crucial to the success of all NASA missions. The Integrated Human Factors Toolkit facilitates this integration by assisting system designers and analysts to select the human factors tools that are most appropriate for the needs of each project. The HF Toolkit contains information about a broad variety of human factors tools addressing human requirements in the physical, information processing and human reliability domains. Analysis of each tool includes consideration of the most appropriate design stage, the amount of expertise in human factors that is required, the amount of experience with the tool and the target job tasks that are needed, and other factors that are critical for successful use of the tool. The benefits of the Toolkit include improved safety, reliability and effectiveness of NASA systems throughout the agency. This report outlines the initial stages of development for the Integrated Human Factors Toolkit.

Advanced concepts for transformers pressboard dielectric constant and mechanical strength

NASA Astrophysics Data System (ADS)

1982-03-01

Of the numerous electrical considerations in a material, the value of the dielectric constant serves as an important criterion in designing proper insulation systems. Ways to reduce the dielectric constant of solid (fibrous) insulating materials were investigated. A literature search was made on cellulosic and synthetic fibers and also additives which offered the potential for dielectric constant reduction of the solid insulation. Sample board structures were produced in the laboratory and tested for electrical, mechanical and chemical characteristics. Electrical tests determined the suitability of the material at transformer test and operating conditions. The mechanical tests established the physical characteristics of the modified board structures. Chemical tests checked the conductivity of the aqueous extract, acidity, and ash content. Further, compatibility with transformer oil and some aging tests were performed. An actual computer transformer design was made based on one of the modified board structures and the reduction in core steel and transformer losses were shown.

What implies the good work for registered nurses in municipal elderly care in Sweden?

PubMed

Josefsson, Karin; Aling, Jenny; Östin, Britt-Louise

2011-08-01

The aim was to describe registered nurses' perceptions of what the good work implies to them in municipal elderly care. A descriptive design and a structured questionnaire specifically designed for this study were used. Sixty housing units for older people and 213 nurses participated, with a response rate of 62%. The good work included the following aspects: intellectually stimulating without guilt feelings; freedom and independence with the possibility to influence; having appreciative and pleasant fellow workers and a fair and understanding manager; a good physical and risk-free environment; work security and a steady income with the possibility of improving salary through work effort; work effort should be beneficial to others; innovative thinking and initiative should be highly valued; and pride in work without compromising personal values. Employers must take this into consideration to retain those nurses already employed and recruit nurses to municipal elderly care.

An esthetics rehabilitation with computer-aided design/ computer-aided manufacturing technology.

PubMed

Mazaro, Josá Vitor Quinelli; de Mello, Caroline Cantieri; Zavanelli, Adriana Cristina; Santiago, Joel Ferreira; Amoroso, Andressa Paschoal; Pellizzer, Eduardo Piza

2014-07-01

This paper describes a case of a rehabilitation involving Computer Aided Design/Computer Aided Manufacturing (CAD-CAM) system in implant supported and dental supported prostheses using zirconia as framework. The CAD-CAM technology has developed considerably over last few years, becoming a reality in dental practice. Among the widely used systems are the systems based on zirconia which demonstrate important physical and mechanical properties of high strength, adequate fracture toughness, biocompatibility and esthetics, and are indicated for unitary prosthetic restorations and posterior and anterior framework. All the modeling was performed by using CAD-CAM system and prostheses were cemented using resin cement best suited for each situation. The rehabilitation of the maxillary arch using zirconia framework demonstrated satisfactory esthetic and functional results after a 12-month control and revealed no biological and technical complications. This article shows the important of use technology CAD/CAM in the manufacture of dental prosthesis and implant-supported.

Operational Physical Performance and Fitness in Military Women: Physiological, Musculoskeletal Injury, and Optimized Physical Training Considerations for Successfully Integrating Women Into Combat-Centric Military Occupations.

PubMed

Nindl, Bradley C; Jones, Bruce H; Van Arsdale, Stephanie J; Kelly, Karen; Kraemer, William J

2016-01-01

This article summarizes presentations from a 2014 United States Department of Defense (DoD) Health Affairs Women in Combat symposium addressing physiological, musculoskeletal injury, and optimized physical training considerations from the operational physical performance section. The symposium was held to provide a state-of-the-science meeting on the U.S. DoD's rescinding of the ground combat exclusion policy opening up combat-centric occupations to women. Physiological, metabolic, body composition, bone density, cardiorespiratory fitness, and thermoregulation differences between men and women were briefly reviewed. Injury epidemiological data are presented within military training and operational environments demonstrating women to be at a higher risk for musculoskeletal injuries than men. Physical training considerations for improved muscle strength and power, occupational task performance, load carriage were also reviewed. Particular focus of this article was given to translating physiological and epidemiological findings from the literature on these topics toward actionable guidance and policy recommendations for military leaders responsible for military physical training doctrine: (1) inclusion of resistance training with special emphasis on strength and power development (i.e., activation of high-threshold motor units and recruitment of type II high-force muscle fibers), upper-body strength development, and heavy load carriage, (2) moving away from "field expediency" as the major criteria for determining military physical training policy and training implementation, (3) improvement of load carriage ability with emphasis placed on specific load carriage task performance, combined with both resistance and endurance training, and (4) providing greater equipment resources, coaching assets, and increased training time dedicated to physical readiness training. Reprint & Copyright © 2016 Association of Military Surgeons of the U.S.

METHODS FOR INTEGRATING ENVIRONMENTAL CONSIDERATIONS INTO CHEMICAL PROCESS DESIGN DECISIONS

EPA Science Inventory

The objective of this cooperative agreement was to postulate a means by which an engineer could routinely include environmental considerations in day-to-day conceptual design problems; a means that could easily integrate with existing design processes, and thus avoid massive retr...

STORMWATER BEST MANAGEMENT PRACTICES DESIGN GUIDE VOLUME 1 - GENERAL CONSIDERATIONS

EPA Science Inventory

This document is Volume 1 of a three volume series that provides guidance on the selection and design of stormwater management Best Management Practices (BMPs). This first volume provides general considerations associated with the selection and design of BMPs.
Volume I provi...

Interrater reliability of the cervicothoracic and shoulder physical examination in patients with a primary complaint of shoulder pain.

PubMed

Burns, Scott A; Cleland, Joshua A; Carpenter, Kristin; Mintken, Paul E

2016-03-01

Examine the interrater reliability of cervicothoracic and shoulder physical examination in patients with a primary complaint of shoulder pain. Single-group repeated-measures design for interrater reliability. Orthopaedic physical therapy clinics. Twenty-one patients with a primary complaint of shoulder pain underwent a standardized examination by a physical therapist (PT). A PT conducted the first examination and one of two additional PTs conducted the 2nd examination. The Cohen κ and weighted κ were used to calculate the interrater reliability of ordinal level data. Intraclass correlation coefficients model 2,1 (ICC2,1) and the 95% confidence intervals were calculated to determine the interrater reliability. The kappa coefficients ranged from -.24 to .83 for the mobility assessment of the glenohumeral, acromioclavicular and sternoclavicular joints. The kappa coefficients ranged from -.20 to .58 for joint mobility assessment of the cervical and thoracic spine. The kappa coefficients ranged from .23 to 1.0 for special tests of the shoulder and cervical spine. The present study reported the reliability of a comprehensive upper quarter physical examination for a group of patients with a primary report of shoulder pain. The reliability varied considerably for the cervical and shoulder examination and was significantly higher for the examination of muscle length and cervical range of motion. Copyright © 2015 Elsevier Ltd. All rights reserved.

Design considerations to improve cognitive ergonomic issues of unmanned vehicle interfaces utilizing video game controllers.

PubMed

Oppold, P; Rupp, M; Mouloua, M; Hancock, P A; Martin, J

2012-01-01

Unmanned (UAVs, UCAVs, and UGVs) systems still have major human factors and ergonomic challenges related to the effective design of their control interface systems, crucial to their efficient operation, maintenance, and safety. Unmanned system interfaces with a human centered approach promote intuitive interfaces that are easier to learn, and reduce human errors and other cognitive ergonomic issues with interface design. Automation has shifted workload from physical to cognitive, thus control interfaces for unmanned systems need to reduce mental workload on the operators and facilitate the interaction between vehicle and operator. Two-handed video game controllers provide wide usability within the overall population, prior exposure for new operators, and a variety of interface complexity levels to match the complexity level of the task and reduce cognitive load. This paper categorizes and provides taxonomy for 121 haptic interfaces from the entertainment industry that can be utilized as control interfaces for unmanned systems. Five categories of controllers were based on the complexity of the buttons, control pads, joysticks, and switches on the controller. This allows the selection of the level of complexity needed for a specific task without creating an entirely new design or utilizing an overly complex design.

Physics Textbooks Presentation of the Energy-Conservation Principle in Hydrodynamics

ERIC Educational Resources Information Center

Ibanez, M.; Ramos, M. C.

2004-01-01

The purpose of this study is to determine how energy-conservation principle is exposed in hydrodynamics chapters of university physics textbooks. Ten physics textbooks analyzed show considerable deficiencies in the use of energy concepts related to uncompressible fluid dynamics. The following problems have been extensively found: The pressure…

Ego Integrity of Older People with Physical Disability and Therapeutic Recreation

ERIC Educational Resources Information Center

de Guzman, Allan B.; Shim, Hye-Eun; Sia, Charmin Kathleen M.; Siazon, Wilbart Harvey S.; Sibal, Mary Joyce Ann P.; Siglos, Joanna Brigitte Lorraine C.; Simeon, Francis Marlo C.

2011-01-01

Ego integrity, the last developmental task in Erikson's psychological theory, develops naturally among older people. However, the presence of loss-like physical disability-can considerably affect the quality of life, interactions, and well being of older adults. Hence, older people with physical disabilities need more assistance in accomplishing…

Active Learning Strategies for Introductory Light and Optics

ERIC Educational Resources Information Center

Sokoloff, David R.

2016-01-01

There is considerable evidence that traditional approaches are ineffective in teaching physics concepts, including light and optics concepts. A major focus of the work of the Activity Based Physics Group has been on the development of active learning curricula like RealTime Physics (RTP) labs and Interactive Lecture Demonstrations (ILDs). Among…

Fundamentals of microfluidic cell culture in controlled microenvironments†

PubMed Central

Young, Edmond W. K.; Beebe, David J.

2010-01-01

Microfluidics has the potential to revolutionize the way we approach cell biology research. The dimensions of microfluidic channels are well suited to the physical scale of biological cells, and the many advantages of microfluidics make it an attractive platform for new techniques in biology. One of the key benefits of microfluidics for basic biology is the ability to control parameters of the cell microenvironment at relevant length and time scales. Considerable progress has been made in the design and use of novel microfluidic devices for culturing cells and for subsequent treatment and analysis. With the recent pace of scientific discovery, it is becoming increasingly important to evaluate existing tools and techniques, and to synthesize fundamental concepts that would further improve the efficiency of biological research at the microscale. This tutorial review integrates fundamental principles from cell biology and local microenvironments with cell culture techniques and concepts in microfluidics. Culturing cells in microscale environments requires knowledge of multiple disciplines including physics, biochemistry, and engineering. We discuss basic concepts related to the physical and biochemical microenvironments of the cell, physicochemical properties of that microenvironment, cell culture techniques, and practical knowledge of microfluidic device design and operation. We also discuss the most recent advances in microfluidic cell culture and their implications on the future of the field. The goal is to guide new and interested researchers to the important areas and challenges facing the scientific community as we strive toward full integration of microfluidics with biology. PMID:20179823

A brittle star-like robot capable of immediately adapting to unexpected physical damage.

PubMed

Kano, Takeshi; Sato, Eiki; Ono, Tatsuya; Aonuma, Hitoshi; Matsuzaka, Yoshiya; Ishiguro, Akio

2017-12-01

A major challenge in robotic design is enabling robots to immediately adapt to unexpected physical damage. However, conventional robots require considerable time (more than several tens of seconds) for adaptation because the process entails high computational costs. To overcome this problem, we focus on a brittle star-a primitive creature with expendable body parts. Brittle stars, most of which have five flexible arms, occasionally lose some of them and promptly coordinate the remaining arms to escape from predators. We adopted a synthetic approach to elucidate the essential mechanism underlying this resilient locomotion. Specifically, based on behavioural experiments involving brittle stars whose arms were amputated in various ways, we inferred the decentralized control mechanism that self-coordinates the arm motions by constructing a simple mathematical model. We implemented this mechanism in a brittle star-like robot and demonstrated that it adapts to unexpected physical damage within a few seconds by automatically coordinating its undamaged arms similar to brittle stars. Through the above-mentioned process, we found that physical interaction between arms plays an essential role for the resilient inter-arm coordination of brittle stars. This finding will help develop resilient robots that can work in inhospitable environments. Further, it provides insights into the essential mechanism of resilient coordinated motions characteristic of animal locomotion.

Symptom variability, affect and physical activity in ambulatory persons with multiple sclerosis: Understanding patterns and time-bound relationships.

PubMed

Kasser, Susan L; Goldstein, Amanda; Wood, Phillip K; Sibold, Jeremy

2017-04-01

Individuals with multiple sclerosis (MS) experience a clinical course that is highly variable with daily fluctuations in symptoms significantly affecting functional ability and quality of life. Yet, understanding how MS symptoms co-vary and associate with physical and psychological health is unclear. The purpose of the study was to explore variability patterns and time-bound relationships across symptoms, affect, and physical activity in individuals with MS. The study employed a multivariate, replicated, single-subject repeated-measures (MRSRM) design and involved four individuals with MS. Mood, fatigue, pain, balance confidence, and losses of balance were measured daily over 28 days by self-report. Physical activity was also measured daily over this same time period via accelerometry. Dynamic factor analysis (DFA) was used to determine the dimensionality and lagged relationships across the variables. Person-specific models revealed considerable time-dependent co-variation patterns as well as pattern variation across subjects. Results also offered insight into distinct variability structures at varying levels of disability. Modeling person-level variability may be beneficial for addressing the heterogeneity of experiences in individuals with MS and for understanding temporal and dynamic interrelationships among perceived symptoms, affect, and health outcomes in this group. Copyright © 2016 Elsevier Inc. All rights reserved.

A brittle star-like robot capable of immediately adapting to unexpected physical damage

PubMed Central

Sato, Eiki; Ono, Tatsuya; Aonuma, Hitoshi; Matsuzaka, Yoshiya; Ishiguro, Akio

2017-01-01

A major challenge in robotic design is enabling robots to immediately adapt to unexpected physical damage. However, conventional robots require considerable time (more than several tens of seconds) for adaptation because the process entails high computational costs. To overcome this problem, we focus on a brittle star—a primitive creature with expendable body parts. Brittle stars, most of which have five flexible arms, occasionally lose some of them and promptly coordinate the remaining arms to escape from predators. We adopted a synthetic approach to elucidate the essential mechanism underlying this resilient locomotion. Specifically, based on behavioural experiments involving brittle stars whose arms were amputated in various ways, we inferred the decentralized control mechanism that self-coordinates the arm motions by constructing a simple mathematical model. We implemented this mechanism in a brittle star-like robot and demonstrated that it adapts to unexpected physical damage within a few seconds by automatically coordinating its undamaged arms similar to brittle stars. Through the above-mentioned process, we found that physical interaction between arms plays an essential role for the resilient inter-arm coordination of brittle stars. This finding will help develop resilient robots that can work in inhospitable environments. Further, it provides insights into the essential mechanism of resilient coordinated motions characteristic of animal locomotion. PMID:29308250

The Physics Performance Of The Front Steering Launcher For The ITER ECRH Upper Port

DOE Office of Scientific and Technical Information (OSTI.GOV)

Henderson, M.; Chavan, R.; Nikkola, P.

2005-09-26

The capability of any given e.m.-wave plasma heating system to be utilized for physics applications depends strongly on the technical properties of the launching antenna (or launcher). An effective ECH launcher must project a small mm-wave beam spot size far into the plasma and 'steer' the beam across a large fraction of the plasma cross section (along the resonance surface). Thus the choice in the launcher concept and design may either severely limit or enhance the capability of a heating system to be effectively applied for physics applications, such as sawtooth stabilization, control of the Neoclassical Tearing Mode (NTM), Edgemore » Localized Mode (ELM) control, etc. Presently, two antenna concepts are under consideration for the ITER upper port ECH launcher: front steering (FS) and remote steering (RS) launchers. The RS launcher has the technical advantage of easier maintenance access to the steering mirror, which is isolated from the torus vacuum. The FS launcher places the steering mirror near the plasma increasing the technical challenges, but significantly enhancing the focusing and steering capabilities of the launcher, offering a threefold increase in NTM stabilization efficiency over the RS launcher as well as the potential for application to other critical physics issues such as ELM or sawtooth control.« less

Glasses-type wearable computer displays: usability considerations examined with a 3D glasses case study.

PubMed

Chang, Joonho; Moon, Seung Ki; Jung, Kihyo; Kim, Wonmo; Parkinson, Matthew; Freivalds, Andris; Simpson, Timothy W; Baik, Seon Pill

2018-05-01

This study presents usability considerations and solutions for the design of glasses-type wearable computer displays and examines their effectiveness in a case study. Design countermeasures were investigated by a four-step design process: (1) preliminary design analysis; (2) design idea generation; (3) final design selection; and (4) virtual fitting trial. Three design interventions were devised from the design process: (1) weight balance to reduce pressure concentrated on the nose, (2) compliant temples to accommodate diverse head sizes and (3) a hanger mechanism to help spectacle users hang their wearable display on their eye glasses. To investigate their effectiveness, in the case study, the novel 3D glasses adopting the three interventions were compared with two existing 3D glasses in terms of neck muscle fatigue and subjective discomfort rating. While neck muscle fatigue was not significantly different among the three glasses (p = 0.467), the novel glasses had significantly smaller discomfort ratings (p = 0.009). Relevance to Industry: A four-step design process identified usability considerations and solutions for the design of glasses-type wearable computer displays. A novel 3D glasses was proposed through the process and its effectiveness was validated. The results identify design considerations and opportunities relevant to the emerging wearable display industry.

Gender Differences in the High School and Affective Experiences of Introductory College Physics Students

ERIC Educational Resources Information Center

Hazari, Zahra; Sadler, Philip M.; Tai, Robert H.

2008-01-01

The disparity in persistence between males and females studying physics has been a topic of concern to physics educators for decades. Overall, while female students perform as well as or better than male students, they continue to lag considerably in terms of persistence. The most significant drop in females studying physics occurs between high…

The association between physical symptoms and depression among medical students in Bahrain.

PubMed

Abdelaziz, Ammar M Y; Alotaibi, Khalid T; Alhurayyis, Jarah H; Alqahtani, Turky A; Alghamlas, Aamer M; Algahtani, Haifa M; Jahrami, Haitham A

2017-12-15

To examine the association between depression and physical symptoms among medical students in Bahrain.   The present study employed a cross-sectional design.  A total of 160 students were recruited, 41.3% were male and 58.8% female, using a convenience sampling approach. Participants completed the validated Patients Health Questionnaires (PHQs) in which they provided information about demographics, physical symptoms, and depression. Results were considered significant if p <0.05. Nearly nineteen percent of the participants have moderate to severe depression, and 42.2% has moderate to severe physical symptoms.  Participants reported different physical symptoms, sleep problems, 40%; lethargy, 31.9%; and headaches, 23.8%. The results of the logistic regression showed that there was a significant association between age and gender (χ 2 (3) = 32.28, p < 0.001). Sleep and gastrointestinal symptoms were the most associated with depression, respectively (χ 2 (3) =49.77, p<0.001) and (χ 2 (3) =49.77, p< 0.05). The association between depression and physical symptoms are considerably high among medical students in Bahrain.  Medical educators should take such symptoms seriously among medical students as it may have serious consequences on the mental health of medical students. In practice, adequate awareness initiatives should be organized and provided for medical students to help them overcome their challenges they face. Additionally, incorporating screening self-screening strategies in the medical curriculum can be beneficial for early detections of mental health problems. The Implications and limitations of the study are discussed.

New Developments in the Method of Space-Time Conservation Element and Solution Element-Applications to Two-Dimensional Time-Marching Problems

NASA Technical Reports Server (NTRS)

Chang, Sin-Chung; Wang, Xiao-Yen; Chow, Chuen-Yen

1994-01-01

A new numerical discretization method for solving conservation laws is being developed. This new approach differs substantially in both concept and methodology from the well-established methods, i.e., finite difference, finite volume, finite element, and spectral methods. It is motivated by several important physical/numerical considerations and designed to avoid several key limitations of the above traditional methods. As a result of the above considerations, a set of key principles for the design of numerical schemes was put forth in a previous report. These principles were used to construct several numerical schemes that model a 1-D time-dependent convection-diffusion equation. These schemes were then extended to solve the time-dependent Euler and Navier-Stokes equations of a perfect gas. It was shown that the above schemes compared favorably with the traditional schemes in simplicity, generality, and accuracy. In this report, the 2-D versions of the above schemes, except the Navier-Stokes solver, are constructed using the same set of design principles. Their constructions are simplified greatly by the use of a nontraditional space-time mesh. Its use results in the simplest stencil possible, i.e., a tetrahedron in a 3-D space-time with a vertex at the upper time level and other three at the lower time level. Because of the similarity in their design, each of the present 2-D solvers virtually shares with its 1-D counterpart the same fundamental characteristics. Moreover, it is shown that the present Euler solver is capable of generating highly accurate solutions for a famous 2-D shock reflection problem. Specifically, both the incident and the reflected shocks can be resolved by a single data point without the presence of numerical oscillations near the discontinuity.

3D toroidal physics: testing the boundaries of symmetry breaking

NASA Astrophysics Data System (ADS)

Spong, Don

2014-10-01

Toroidal symmetry is an important concept for plasma confinement; it allows the existence of nested flux surface MHD equilibria and conserved invariants for particle motion. However, perfect symmetry is unachievable in realistic toroidal plasma devices. For example, tokamaks have toroidal ripple due to discrete field coils, optimized stellarators do not achieve exact quasi-symmetry, the plasma itself continually seeks lower energy states through helical 3D deformations, and reactors will likely have non-uniform distributions of ferritic steel near the plasma. Also, some level of designed-in 3D magnetic field structure is now anticipated for most concepts in order to lead to a stable, steady-state fusion reactor. Such planned 3D field structures can take many forms, ranging from tokamaks with weak 3D ELM-suppression fields to stellarators with more dominant 3D field structures. There is considerable interest in the development of unified physics models for the full range of 3D effects. Ultimately, the questions of how much symmetry breaking can be tolerated and how to optimize its design must be addressed for all fusion concepts. Fortunately, significant progress is underway in theory, computation and plasma diagnostics on many issues such as magnetic surface quality, plasma screening vs. amplification of 3D perturbations, 3D transport, influence on edge pedestal structures, MHD stability effects, modification of fast ion-driven instabilities, prediction of energetic particle heat loads on plasma-facing materials, effects of 3D fields on turbulence, and magnetic coil design. A closely coupled program of simulation, experimental validation, and design optimization is required to determine what forms and amplitudes of 3D shaping and symmetry breaking will be compatible with future fusion reactors. The development of models to address 3D physics and progress in these areas will be described. This work is supported both by the US Department of Energy under Contract DE-AC05-00OR22725 with UT-Battelle, LLC and under the US DOE SciDAC GSEP Center.

Content and bibliometric analyses of the Journal of Manual & Manipulative Therapy

PubMed Central

Simon, Corey B; Coronado, Rogelio A; Wurtzel, Wendy A; Riddle, Daniel L; George, Steven Z

2014-01-01

Background: Article characteristics and trends have been elucidated for other physical therapy-focused journals using content and bibliometric analysis. These findings are important for assessing the current state of a journal and for guiding future publication of research. To date, these analyses have not been performed for the Journal of Manual & Manipulative Therapy (JMMT). Objective: To describe content and trends for articles published in JMMT over a 20-year period (1993–2012). Methods: Journal articles were coded using previously-established domains (article type, participant type, research design, study purpose, and clinical condition). Total publications and proportion of publications based on domain were described. Articles specific to manual therapy intervention were examined and compared to data from other physical therapy-focused journals. Impact by citation and author was examined using bibliometric software. Results: Journal of Manual & Manipulative Therapy was found to have a recent acceleration in the number of articles published annually. Over time, topical reviews have decreased in favor of research reports. However, rigorous study designs have represented only a small portion of total journal content, and case reports have maintained a consistent publication presence. Manual therapy intervention articles in JMMT are predominantly case designs, however are similar in characteristics to manual therapy intervention articles published in other physical therapy-focused journals. For JMMT articles overall and manual therapy intervention articles across journals, young to middle-aged symptomatic adults with low back and/or neck pain were the most common study participants. Discussion: Increases in the number of papers and a move toward research reports were observed in JMMT over the 20-year period. Considerations for the future were outlined, including the publication of articles with more rigorous research designs. Manual therapy research for adolescents and older adults and for upper and lower extremity conditions should also be considered as priorities for the future. PMID:25395826

Shuttle considerations for the design of large space structures

NASA Technical Reports Server (NTRS)

Roebuck, J. A., Jr.

1980-01-01

Shuttle related considerations (constraints and guidelines) are compiled for use by designers of a potential class of large space structures which are transported to orbit and, deployed, fabricated or assembled in space using the Space Shuttle Orbiter. Considerations of all phases of shuttle operations from launch to ground turnaround operations are presented. Design of large space structures includes design of special construction fixtures and support equipment, special stowage cradles or pallets, special checkout maintenance, and monitoring equipment, and planning for packaging into the orbiter of all additional provisions and supplies chargeable to payload. Checklists of design issues, Shuttle capabilities constraints and guidelines, as well as general explanatory material and references to source documents are included.

Frequent attenders in general practice care: a literature review with special reference to methodological considerations.

PubMed

Vedsted, P; Christensen, M B

2005-02-01

To describe the basis on which our knowledge of frequent attendance in general practice rests and to propose recommendations for further research on frequent attenders (FAs). The literature review (finished February 2004) encompassed peer-reviewed articles in English describing contacts with general practice in terms of frequency. Searches were performed in the Medline, CINAHL, EMBASE, PsycINFO, Social Sciences Expanded Index and ISI Citation databases with additional searches in reference lists and the 'related articles' function in the ISI Citation database and Medline. General practice. Sixty-one articles (54 studies). The articles were assessed according to the following design variables: setting; definition of FAs; sampling; sample size; control groups; study aim; study design; data sources; effect measure; and main results. There was no generally accepted definition of frequent attendance. Research designs differed substantially. Eight articles gave sufficient information on all design variables. The top 10% of attenders accounted for 30-50% of all contacts, and up to 40% of FAs were still FAs the following year. More than 50% of FAs had a physical disease, more than 50% of FAs suffered from psychological distress, social factors (low social support, unemployment, divorce) were associated with frequent attendance in more than 50% of FAs, multiproblems (physical, psychological and social) were found in one-third of FAs, and frequent attendance was associated with increasing age and female gender. The diversity of designs, definitions and methods in the current literature on FAs in general practice hampers comparison of their precision, validity and generalizability, and calls for cautious interpretation and adoption of a common, generally acceptable definition in future studies.

Conceptual Demands in the Nuffield O-Level Physics Course

ERIC Educational Resources Information Center

Shayer, Michael

1972-01-01

Critical examination of the Teachers' Guide and Guide to Experiments and Questions Book in O-level Nuffield physics course reveals there may be disadvantages to the current organization when analyzed with psychological considerations. (PS)

Classification of accelerometer wear and non-wear events in seconds for monitoring free-living physical activity

PubMed Central

Zhou, Shang-Ming; Hill, Rebecca A; Morgan, Kelly; Stratton, Gareth; Gravenor, Mike B; Bijlsma, Gunnar; Brophy, Sinead

2015-01-01

Objective To classify wear and non-wear time of accelerometer data for accurately quantifying physical activity in public health or population level research. Design A bi-moving-window-based approach was used to combine acceleration and skin temperature data to identify wear and non-wear time events in triaxial accelerometer data that monitor physical activity. Setting Local residents in Swansea, Wales, UK. Participants 50 participants aged under 16 years (n=23) and over 17 years (n=27) were recruited in two phases: phase 1: design of the wear/non-wear algorithm (n=20) and phase 2: validation of the algorithm (n=30). Methods Participants wore a triaxial accelerometer (GeneActiv) against the skin surface on the wrist (adults) or ankle (children). Participants kept a diary to record the timings of wear and non-wear and were asked to ensure that events of wear/non-wear last for a minimum of 15 min. Results The overall sensitivity of the proposed method was 0.94 (95% CI 0.90 to 0.98) and specificity 0.91 (95% CI 0.88 to 0.94). It performed equally well for children compared with adults, and females compared with males. Using surface skin temperature data in combination with acceleration data significantly improved the classification of wear/non-wear time when compared with methods that used acceleration data only (p<0.01). Conclusions Using either accelerometer seismic information or temperature information alone is prone to considerable error. Combining both sources of data can give accurate estimates of non-wear periods thus giving better classification of sedentary behaviour. This method can be used in population studies of physical activity in free-living environments. PMID:25968000

Human Modeling Evaluations in Microgravity Workstation and Restraint Development

NASA Technical Reports Server (NTRS)

Whitmore, Mihriban; Chmielewski, Cynthia; Wheaton, Aneice; Hancock, Lorraine; Beierle, Jason; Bond, Robert L. (Technical Monitor)

1999-01-01

The International Space Station (ISS) will provide long-term missions which will enable the astronauts to live and work, as well as, conduct research in a microgravity environment. The dominant factor in space affecting the crew is "weightlessness" which creates a challenge for establishing workstation microgravity design requirements. The crewmembers will work at various workstations such as Human Research Facility (HRF), Microgravity Sciences Glovebox (MSG) and Life Sciences Glovebox (LSG). Since the crew will spend considerable amount of time at these workstations, it is critical that ergonomic design requirements are integral part of design and development effort. In order to achieve this goal, the Space Human Factors Laboratory in the Johnson Space Center Flight Crew Support Division has been tasked to conduct integrated evaluations of workstations and associated crew restraints. Thus, a two-phase approach was used: 1) ground and microgravity evaluations of the physical dimensions and layout of the workstation components, and 2) human modeling analyses of the user interface. Computer-based human modeling evaluations were an important part of the approach throughout the design and development process. Human modeling during the conceptual design phase included crew reach and accessibility of individual equipment, as well as, crew restraint needs. During later design phases, human modeling has been used in conjunction with ground reviews and microgravity evaluations of the mock-ups in order to verify the human factors requirements. (Specific examples will be discussed.) This two-phase approach was the most efficient method to determine ergonomic design characteristics for workstations and restraints. The real-time evaluations provided a hands-on implementation in a microgravity environment. On the other hand, only a limited number of participants could be tested. The human modeling evaluations provided a more detailed analysis of the setup. The issues identified during the real-time testing were investigated in the human modeling analyses. In some cases, the opposite was true where preliminary human modeling analyses provided the design engineers with critical issues that needed to be addressed further. This extensive approach provided an effective means to fully address ergonomic design considerations and accurately identify critical issues.

Educational differences in leisure-time physical inactivity: a descriptive and explanatory study.

PubMed

Droomers, M; Schrijvers, C T; van de Mheen, H; Mackenbach, J P

1998-12-01

In this study we aim to explain educational differences in leisure-time physical inactivity in terms of psychosocial and material factors. Cross-sectional data were obtained from the baseline of the Dutch GLOBE study in 1991, including 2598 men and women, aged 15-74 years. Physical inactivity during leisure time was defined as not participating in any activity, such as sports, gardening, walking or cycling. Psychosocial factors included in the study were coping resources, personality, and stressors. Material factors were financial situation, employment status, and living conditions. Logistic regression models were used to calculate educational differences in physical inactivity. Physical inactivity was more prevalent in lower educational groups. Psychosocial factors related to physical inactivity were locus of control, parochialism, neuroticism, emotional social support, active problem focussing, optimistic and palliative coping styles. Material factors associated with physical inactivity were income, employment status and financial problems. All correlates of physical inactivity were unequally distributed over educational groups, except optimistic and palliative coping. Personality and coping style were the main contributors to the observed educational differences in physical inactivity. That is to say, parochialism, locus of control, neuroticism and active problem focussing explained about half of elevated odds ratios of physical inactivity in the lower educational groups. The material factors, equivalent income and employment status explained about 40% of the elevated odds ratios. Psychosocial and material correlates together reduced the odds ratios of lower educational groups by on average 75%. These results have practical consequences for the design of more effective interventions to promote physical activity. In particular, personality and coping style of risk groups, such as lower educational groups, should be taken into consideration at the future development of these interventions, as well as inequalities in material restrictions related to engaging in physical activity. Supplementary interventions focussing on childhood conditions which, partly, influence both personality and physical inactivity may also contribute to a reduction of socio-economic differences in physical inactivity.

An economical educational seismic system

USGS Publications Warehouse

Lehman, J. D.

1980-01-01

There is a considerable interest in seismology from the nonprofessional or amateur standpoint. The operation of a seismic system can be satisfying and educational, especially when you have built and operated the system yourself. A long-period indoor-type sensor and recording system that works extremely well has been developed in the James Madison University Physics Deparment. The system can be built quite economically, and any educational institution that cannot commit themselves to a professional installation need not be without first-hand seismic information. The system design approach has been selected by college students working a project or senior thesis, several elementary and secondary science teachers, as well as the more ambitious tinkerer or hobbyist at home 

Optical polarimetry: Instrumentation and applications; Proceedings of the Seminar, San Diego, Calif., August 23, 24, 1977

NASA Technical Reports Server (NTRS)

Azzam, R. M. A. (Editor); Coffeen, D. L.

1977-01-01

Instrumentation used in optical polarimetry is discussed with reference to high-resolution spectropolarimetry, an orbiter cloud photopolarimeter, X-ray polarimeters, and the design of a self-nulling ellipsometer. Consideration is given to surface and thin-film ellipsometry noting studies of electrochemical surface layers, surface anisotropy, polish layers on infrared window materials, and anodic films. Papers on biological, chemical, and physical polarimetry are presented including birefringence in biological materials, vibrational optical activity, and the optical determination of the thermodynamic phase diagram of a metamagnet. Remote sensing is discussed in terms of polarization imagery, the optical polarimetry of particulate surfaces, and techniques and applications of elliptical polarimetry in astronomy and atmospheric studies.

Young Adults’ Attitudes and Perceptions of Obesity and Weight Management: Implications for Treatment Development

PubMed Central

Lanoye, Autumn; Gorin, Amy A.; LaRose, Jessica Gokee

2017-01-01

Young adults are underrepresented in standard behavioral weight loss trials, and evidence suggests that they differ from older adults on many weight related constructs. The aim of this review is to explore young adults’ attitudes toward obesity and weight management, with particular attention to those factors that may play a role in development of future treatment efforts. Both intrapersonal and interpersonal considerations unique to young adulthood are assessed; in addition, we examine young adults’ perceptions of specific weight-related behaviors such as dieting, physical activity, and self-weighing. Conclusions are consistent with other findings suggesting that weight management interventions should be adapted and designed specifically for this age group. PMID:26923688

Using artificial intelligence to control fluid flow computations

NASA Technical Reports Server (NTRS)

Gelsey, Andrew

1992-01-01

Computational simulation is an essential tool for the prediction of fluid flow. Many powerful simulation programs exist today. However, using these programs to reliably analyze fluid flow and other physical situations requires considerable human effort and expertise to set up a simulation, determine whether the output makes sense, and repeatedly run the simulation with different inputs until a satisfactory result is achieved. Automating this process is not only of considerable practical importance but will also significantly advance basic artificial intelligence (AI) research in reasoning about the physical world.

LABORATORY DESIGN CONSIDERATIONS FOR SAFETY.

ERIC Educational Resources Information Center

National Safety Council, Chicago, IL. Campus Safety Association.

THIS SET OF CONSIDERATIONS HAS BEEN PREPARED TO PROVIDE PERSONS WORKING ON THE DESIGN OF NEW OR REMODELED LABORATORY FACILITIES WITH A SUITABLE REFERENCE GUIDE TO DESIGN SAFETY. THERE IS NO DISTINCTION BETWEEN TYPES OF LABORATORY AND THE EMPHASIS IS ON GIVING GUIDES AND ALTERNATIVES RATHER THAN DETAILED SPECIFICATIONS. AREAS COVERED INCLUDE--(1)…

Design considerations for space flight hardware

NASA Technical Reports Server (NTRS)

Glover, Daniel

1990-01-01

The environmental and design constraints are reviewed along with some insight into the established design and quality assurance practices that apply to low earth orbit (LEO) space flight hardware. It is intended as an introduction for people unfamiliar with space flight considerations. Some basic data and a bibliography are included.

Optimum Design of High Speed Prop-Rotors

NASA Technical Reports Server (NTRS)

Chattopadhyay, Aditi

1992-01-01

The objective of this research is to develop optimization procedures to provide design trends in high speed prop-rotors. The necessary disciplinary couplings are all considered within a closed loop optimization process. The procedures involve the consideration of blade aeroelastic, aerodynamic performance, structural and dynamic design requirements. Further, since the design involves consideration of several different objectives, multiobjective function formulation techniques are developed.

A framework for understanding school based physical environmental influences on childhood obesity

PubMed Central

Harrison, Flo; Jones, Andrew P

2013-01-01

Schools are inviting settings for the promotion of healthy behaviours in children, and a number of interventions have been trialled to improve diet or increase physical activity levels with the ultimate aim of reducing the prevalence of obesity. However, these have seen mixed results and there is suggestion that consideration needs to be given to a broader definition of the school environment in order to encourage sustainable behaviour changes. This review considers evidence for associations between the physical school environment and diet, physical activity and adiposity. School environment covers the neighbourhood around the school as well as the school grounds, buildings and facilities. Reviewed evidence is used to construct a conceptual framework for understanding associations between the physical school environment and adiposity and related behaviours. The framework highlights how school environments may be modified to promote behaviour changes, and how they may limit or enhance the success of other school-based interventions. Consideration is also given to where future work may best be directed. PMID:22281440

Spacelab to Space Station; Proceedings of the International Symposium on Spacelab 1 - Results, Implications and Perspectives, Naples and Capri, Italy, June 11-16, 1984

NASA Technical Reports Server (NTRS)

Napolitano, L. G. (Editor)

1985-01-01

Consideration is given to the scientific objectives of the Spacelab program, a review of data obtained during the STS-9/Spacelab 1 mission on board the Shuttle, and the coordination of future Spacelab research among participating European nations. Among the specific fields of study covered by Spacelab 1 were space plasma physics, materials and fluid sciences and technology, astronomy and solar physics, and atmospheric physics and earth observations. Consideration is also given to the legal aspects of space manufacturing activities, the role of private industry in space-based manufacturing ventures, plant production and breeding in space, and the development of remote sensing systems for use in a microgravity environment.

Computational Nanoelectronics and Nanotechnology at NASA ARC

NASA Technical Reports Server (NTRS)

Saini, Subhash; Kutler, Paul (Technical Monitor)

1998-01-01

Both physical and economic considerations indicate that the scaling era of CMOS will run out of steam around the year 2010. However, physical laws also indicate that it is possible to compute at a rate of a billion times present speeds with the expenditure of only one Watt of electrical power. NASA has long-term needs where ultra-small semiconductor devices are needed for critical applications: high performance, low power, compact computers for intelligent autonomous vehicles and Petaflop computing technology are some key examples. To advance the design, development, and production of future generation micro- and nano-devices, IT Modeling and Simulation Group has been started at NASA Ames with a goal to develop an integrated simulation environment that addresses problems related to nanoelectronics and molecular nanotechnology. Overview of nanoelectronics and nanotechnology research activities being carried out at Ames Research Center will be presented. We will also present the vision and the research objectives of the IT Modeling and Simulation Group including the applications of nanoelectronic based devices relevant to NASA missions.

Computational Nanoelectronics and Nanotechnology at NASA ARC

NASA Technical Reports Server (NTRS)

Saini, Subhash

1998-01-01

Both physical and economic considerations indicate that the scaling era of CMOS will run out of steam around the year 2010. However, physical laws also indicate that it is possible to compute at a rate of a billion times present speeds with the expenditure of only one Watt of electrical power. NASA has long-term needs where ultra-small semiconductor devices are needed for critical applications: high performance, low power, compact computers for intelligent autonomous vehicles and Petaflop computing technolpgy are some key examples. To advance the design, development, and production of future generation micro- and nano-devices, IT Modeling and Simulation Group has been started at NASA Ames with a goal to develop an integrated simulation environment that addresses problems related to nanoelectronics and molecular nanotecnology. Overview of nanoelectronics and nanotechnology research activities being carried out at Ames Research Center will be presented. We will also present the vision and the research objectives of the IT Modeling and Simulation Group including the applications of nanoelectronic based devices relevant to NASA missions.

The performance and limitations of FPGA-based digital servos for atomic, molecular, and optical physics experiments

NASA Astrophysics Data System (ADS)

Yu, Shi Jing; Fajeau, Emma; Liu, Lin Qiao; Jones, David J.; Madison, Kirk W.

2018-02-01

In this work, we address the advantages, limitations, and technical subtleties of employing field programmable gate array (FPGA)-based digital servos for high-bandwidth feedback control of lasers in atomic, molecular, and optical physics experiments. Specifically, we provide the results of benchmark performance tests in experimental setups including noise, bandwidth, and dynamic range for two digital servos built with low and mid-range priced FPGA development platforms. The digital servo results are compared to results obtained from a commercially available state-of-the-art analog servo using the same plant for control (intensity stabilization). The digital servos have feedback bandwidths of 2.5 MHz, limited by the total signal latency, and we demonstrate improvements beyond the transfer function offered by the analog servo including a three-pole filter and a two-pole filter with phase compensation to suppress resonances. We also discuss limitations of our FPGA-servo implementation and general considerations when designing and using digital servos.

AAPM Task Group 103 report on peer review in clinical radiation oncology physics

PubMed Central

Halvorsen, Per H.; Das, Indra J.; Fraser, Martin; Freedman, D. Jay; Rice, Robert E.; Ibbott, Geoffrey S.; Parsai, E. Ishmael; Robin, T. Tydings; Thomadsen, Bruce R.

2005-01-01

This report provides guidelines for a peer review process between two clinical radiation oncology physicists. While the Task Group's work was primarily focused on ensuring timely and productive independent reviews for physicists in solo practice, these guidelines may also be appropriate for physicists in a group setting, particularly when dispersed over multiple separate clinic locations. To ensure that such reviews enable a collegial exchange of professional ideas and productive critique of the entire clinical physics program, the reviews should not be used as an employee evaluation instrument by the employer. Such use is neither intended nor supported by this Task Group. Detailed guidelines are presented on the minimum content of such reviews, as well as a recommended format for reporting the findings of a review. In consideration of the full schedules faced by most clinical physicists, the process outlined herein was designed to be completed in one working day. PACS numbers: 87.53.Xd, 87.90.+y PMID:16421500

Validating a Model for Welding Induced Residual Stress Using High-Energy X-ray Diffraction

DOE PAGES

Mach, J. C.; Budrow, C. J.; Pagan, D. C.; ...

2017-03-15

Integrated computational materials engineering (ICME) provides a pathway to advance performance in structures through the use of physically-based models to better understand how manufacturing processes influence product performance. As one particular challenge, consider that residual stresses induced in fabrication are pervasive and directly impact the life of structures. For ICME to be an effective strategy, it is essential that predictive capability be developed in conjunction with critical experiments. In the present paper, simulation results from a multi-physics model for gas metal arc welding are evaluated through x-ray diffraction using synchrotron radiation. A test component was designed with intent to developmore » significant gradients in residual stress, be representative of real-world engineering application, yet remain tractable for finely spaced strain measurements with positioning equipment available at synchrotron facilities. Finally, the experimental validation lends confidence to model predictions, facilitating the explicit consideration of residual stress distribution in prediction of fatigue life.« less

The performance and limitations of FPGA-based digital servos for atomic, molecular, and optical physics experiments.

PubMed

Yu, Shi Jing; Fajeau, Emma; Liu, Lin Qiao; Jones, David J; Madison, Kirk W

2018-02-01

In this work, we address the advantages, limitations, and technical subtleties of employing field programmable gate array (FPGA)-based digital servos for high-bandwidth feedback control of lasers in atomic, molecular, and optical physics experiments. Specifically, we provide the results of benchmark performance tests in experimental setups including noise, bandwidth, and dynamic range for two digital servos built with low and mid-range priced FPGA development platforms. The digital servo results are compared to results obtained from a commercially available state-of-the-art analog servo using the same plant for control (intensity stabilization). The digital servos have feedback bandwidths of 2.5 MHz, limited by the total signal latency, and we demonstrate improvements beyond the transfer function offered by the analog servo including a three-pole filter and a two-pole filter with phase compensation to suppress resonances. We also discuss limitations of our FPGA-servo implementation and general considerations when designing and using digital servos.

Programme costing of a physical activity programme in primary prevention: should the costs of health asset assessment and participatory programme development count?

PubMed

Wolfenstetter, Silke B; Schweikert, Bernd; John, Jürgen

2012-01-01

This analysis aims to discuss the implications of the "health asset concept", introduced by the WHO, and the "investment for health model" requiring a "participatory approach" of cooperative programme development applied on a physical activity programme for socially disadvantaged women and to demonstrate the related costing issues as well as the relevant decision context. The costs of programme implementation amounted to €48,700. Adding the costs for developing the programme design of €48,800 results in total costs of €97,500; adding on top of that the costs of asset assessment running to €35,600 would total €133,100. These four different cost figures match four different types of potentially relevant decisions contexts. Depending on the decision context the total costs, and hence the incremental cost-effectiveness ratio of a health promotion intervention, could differ considerably. Therefore, a detailed cost assessment and the identification of the decision context are of crucial importance.

Wind effects on long-span bridges: Probabilistic wind data format for buffeting and VIV load assessments

NASA Astrophysics Data System (ADS)

Hoffmann, K.; Srouji, R. G.; Hansen, S. O.

2017-12-01

The technology development within the structural design of long-span bridges in Norwegian fjords has created a need for reformulating the calculation format and the physical quantities used to describe the properties of wind and the associated wind-induced effects on bridge decks. Parts of a new probabilistic format describing the incoming, undisturbed wind is presented. It is expected that a fixed probabilistic format will facilitate a more physically consistent and precise description of the wind conditions, which in turn increase the accuracy and considerably reduce uncertainties in wind load assessments. Because the format is probabilistic, a quantification of the level of safety and uncertainty in predicted wind loads is readily accessible. A simple buffeting response calculation demonstrates the use of probabilistic wind data in the assessment of wind loads and responses. Furthermore, vortex-induced fatigue damage is discussed in relation to probabilistic wind turbulence data and response measurements from wind tunnel tests.

Failure Models and Criteria for FRP Under In-Plane or Three-Dimensional Stress States Including Shear Non-Linearity

NASA Technical Reports Server (NTRS)

Pinho, Silvestre T.; Davila, C. G.; Camanho, P. P.; Iannucci, L.; Robinson, P.

2005-01-01

A set of three-dimensional failure criteria for laminated fiber-reinforced composites, denoted LaRC04, is proposed. The criteria are based on physical models for each failure mode and take into consideration non-linear matrix shear behaviour. The model for matrix compressive failure is based on the Mohr-Coulomb criterion and it predicts the fracture angle. Fiber kinking is triggered by an initial fiber misalignment angle and by the rotation of the fibers during compressive loading. The plane of fiber kinking is predicted by the model. LaRC04 consists of 6 expressions that can be used directly for design purposes. Several applications involving a broad range of load combinations are presented and compared to experimental data and other existing criteria. Predictions using LaRC04 correlate well with the experimental data, arguably better than most existing criteria. The good correlation seems to be attributable to the physical soundness of the underlying failure models.

Validating a Model for Welding Induced Residual Stress Using High-Energy X-ray Diffraction

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mach, J. C.; Budrow, C. J.; Pagan, D. C.

Integrated computational materials engineering (ICME) provides a pathway to advance performance in structures through the use of physically-based models to better understand how manufacturing processes influence product performance. As one particular challenge, consider that residual stresses induced in fabrication are pervasive and directly impact the life of structures. For ICME to be an effective strategy, it is essential that predictive capability be developed in conjunction with critical experiments. In the present paper, simulation results from a multi-physics model for gas metal arc welding are evaluated through x-ray diffraction using synchrotron radiation. A test component was designed with intent to developmore » significant gradients in residual stress, be representative of real-world engineering application, yet remain tractable for finely spaced strain measurements with positioning equipment available at synchrotron facilities. Finally, the experimental validation lends confidence to model predictions, facilitating the explicit consideration of residual stress distribution in prediction of fatigue life.« less

Scaling and Systems Considerations in Pulsed Inductive Thrusters

NASA Technical Reports Server (NTRS)

Polzin, Kurt A.

2007-01-01

Performance scaling in pulsed inductive thrusters is discussed in the context of previous experimental studies and modeling results. Two processes, propellant ionization and acceleration, are interconnected where overall thruster performance and operation are concerned, but they are separated here to gain physical insight into each process and arrive at quantitative criteria that should be met to address or mitigate inherent inductive thruster difficulties. The effects of preionization in lowering the discharge energy requirements relative to a case where no preionization is employed, and in influencing the location of the initial current sheet, are described. The relevant performance scaling parameters for the acceleration stage are reviewed, emphasizing their physical importance and the numerical values required for efficient acceleration. The scaling parameters are then related to the design of the pulsed power train providing current to the acceleration stage. The impact of various choices in pulsed power train and circuit topology selection are reviewed, paying special attention to how these choices mitigate or exacerbate switching, lifetime, and power consumption issues.

Numerical and analytical approaches to an advection-diffusion problem at small Reynolds number and large Péclet number

NASA Astrophysics Data System (ADS)

Fuller, Nathaniel J.; Licata, Nicholas A.

2018-05-01

Obtaining a detailed understanding of the physical interactions between a cell and its environment often requires information about the flow of fluid surrounding the cell. Cells must be able to effectively absorb and discard material in order to survive. Strategies for nutrient acquisition and toxin disposal, which have been evolutionarily selected for their efficacy, should reflect knowledge of the physics underlying this mass transport problem. Motivated by these considerations, in this paper we discuss the results from an undergraduate research project on the advection-diffusion equation at small Reynolds number and large Péclet number. In particular, we consider the problem of mass transport for a Stokesian spherical swimmer. We approach the problem numerically and analytically through a rescaling of the concentration boundary layer. A biophysically motivated first-passage problem for the absorption of material by the swimming cell demonstrates quantitative agreement between the numerical and analytical approaches. We conclude by discussing the connections between our results and the design of smart toxin disposal systems.

Cavitation Generation and Usage Without Ultrasound: Hydrodynamic Cavitation

NASA Astrophysics Data System (ADS)

Gogate, Parag R.; Pandit, Aniruddha B.

Hydrodynamic Cavitation, which was and is still looked upon as an unavoidable nuisance in the flow systems, can be a serious contender as an alternative to acoustic cavitation for harnessing the spectacular effects of cavitation in physical and chemical processing. The present chapter covers the basics of hydrodynamic cavitation including the considerations for the bubble dynamics analysis, reactor designs and recommendations for optimum operating parameters. An overview of applications in different areas of physical, chemical and biological processing on scales ranging from few grams to several hundred kilograms has also been presented. Since hydrodynamic cavitation was initially proposed as an alternative to acoustic cavitation, it is necessary to compare the efficacy of both these modes of cavitations for a variety of applications and hence comparisons have been discussed either on the basis of energy efficiency or based on the scale of operation. Overall it appears that hydrodynamic cavitation results in conditions similar to those generated using acoustic cavitation but at comparatively much larger scale of operation and with better energy efficiencies.

Towards a systems approach to risk considerations for concurrent design

NASA Technical Reports Server (NTRS)

Meshkat, Leila; Oberto, Robert E.

2004-01-01

This paper describes the new process used by the Project Design Center at NASA's Jet Propulsion Laboratory for the identification, assessment and communication of risk elements throughout the lifecycle of a mission design. This process includes a software tool, 'RAP' that collects and communicates risk information between the various designers and a 'risk expert' who mediates this process. The establishment of this process is an attempt towards the systematic consideration of risk in the design decision making process. Using this process, we are able to better keep track of the risks associated with the design decisions. Furthermore, it helps us develop better risk profiles for the studies under consideration. We aim to refine and expand the current process to enable more thorough risk analysis capabilities in the future.

Does Increased Exercise or Physical Activity Alter Ad-Libitum Daily Energy Intake or Macronutrient Composition in Healthy Adults? A Systematic Review

PubMed Central

Donnelly, Joseph E.; Herrmann, Stephen D.; Lambourne, Kate; Szabo, Amanda N.; Honas, Jeffery J.; Washburn, Richard A.

2014-01-01

Background The magnitude of the negative energy balance induced by exercise may be reduced due to compensatory increases in energy intake. Objective To address the question: Does increased exercise or physical activity alter ad-libitum daily energy intake or macronutrient composition in healthy adults? Data Sources PubMed and Embase were searched (January 1990–January 2013) for studies that presented data on energy and/or macronutrient intake by level of exercise, physical activity or change in response to exercise. Ninety-nine articles (103 studies) were included. Study Eligibility Criteria Primary source articles published in English in peer-reviewed journals. Articles that presented data on energy and/or macronutrient intake by level of exercise or physical activity or changes in energy or macronutrient intake in response to acute exercise or exercise training in healthy (non-athlete) adults (mean age 18–64 years). Study Appraisal and Synthesis Methods Articles were grouped by study design: cross-sectional, acute/short term, non-randomized, and randomized trials. Considerable heterogeneity existed within study groups for several important study parameters, therefore a meta-analysis was considered inappropriate. Results were synthesized and presented by study design. Results No effect of physical activity, exercise or exercise training on energy intake was shown in 59% of cross-sectional studies (n = 17), 69% of acute (n = 40), 50% of short-term (n = 10), 92% of non-randomized (n = 12) and 75% of randomized trials (n = 24). Ninety-four percent of acute, 57% of short-term, 100% of non-randomized and 74% of randomized trials found no effect of exercise on macronutrient intake. Forty-six percent of cross-sectional trials found lower fat intake with increased physical activity. Limitations The literature is limited by the lack of adequately powered trials of sufficient duration, which have prescribed and measured exercise energy expenditure, or employed adequate assessment methods for energy and macronutrient intake. Conclusions We found no consistent evidence that increased physical activity or exercise effects energy or macronutrient intake. PMID:24454704

Quasi-steady aerodynamic model of clap-and-fling flapping MAV and validation using free-flight data.

PubMed

Armanini, S F; Caetano, J V; Croon, G C H E de; Visser, C C de; Mulder, M

2016-06-30

Flapping-wing aerodynamic models that are accurate, computationally efficient and physically meaningful, are challenging to obtain. Such models are essential to design flapping-wing micro air vehicles and to develop advanced controllers enhancing the autonomy of such vehicles. In this work, a phenomenological model is developed for the time-resolved aerodynamic forces on clap-and-fling ornithopters. The model is based on quasi-steady theory and accounts for inertial, circulatory, added mass and viscous forces. It extends existing quasi-steady approaches by: including a fling circulation factor to account for unsteady wing-wing interaction, considering real platform-specific wing kinematics and different flight regimes. The model parameters are estimated from wind tunnel measurements conducted on a real test platform. Comparison to wind tunnel data shows that the model predicts the lift forces on the test platform accurately, and accounts for wing-wing interaction effectively. Additionally, validation tests with real free-flight data show that lift forces can be predicted with considerable accuracy in different flight regimes. The complete parameter-varying model represents a wide range of flight conditions, is computationally simple, physically meaningful and requires few measurements. It is therefore potentially useful for both control design and preliminary conceptual studies for developing new platforms.

Testing CuO nanowires as a novel X-ray to electron converter for gas-filled radiation detectors

NASA Astrophysics Data System (ADS)

Zarei, H.; Saramad, S.; Razaghi, S.

2017-10-01

Nanowires, due to their special physical properties and also high surface to volume ratio, can have considerable applications in designing and development of novel nanodevices. For the radiation shielding, higher absorption coefficient of nanostructures in comparison to bulk ones is an advantage. In gas detectors, designing a proper converter that absorbs higher energy of gamma and X-rays and convert it to more free electrons is one of the major problems. Since the nanowires have higher surface to volume ratio in comparison to the bulk one, so it is expected that by optimizing the thickness, the generated electrons can have higher chance to escape from the surface. In this work, the random CuO nanowires with diameter of 40 nm are deposited on thin glass slide. This nanostructure with different thicknesses are tested by plastic and CsI scintillators by X-ray tube with HVs in the range of 16 to 25 kV. The results show that for the same thickness, the CuO nanowires can release electrons six times more than the bulk ones and for the same energy the optimum QE of nanoconverter can be three times greater than the bulk converter. This novel nanoconverter with higher detection efficiency can have applications in high energy physics, medical imaging and also astronomy.

A physics-based fractional order model and state of energy estimation for lithium ion batteries. Part I: Model development and observability analysis

NASA Astrophysics Data System (ADS)

Li, Xiaoyu; Fan, Guodong; Pan, Ke; Wei, Guo; Zhu, Chunbo; Rizzoni, Giorgio; Canova, Marcello

2017-11-01

The design of a lumped parameter battery model preserving physical meaning is especially desired by the automotive researchers and engineers due to the strong demand for battery system control, estimation, diagnosis and prognostics. In light of this, a novel simplified fractional order electrochemical model is developed for electric vehicle (EV) applications in this paper. In the model, a general fractional order transfer function is designed for the solid phase lithium ion diffusion approximation. The dynamic characteristics of the electrolyte concentration overpotential are approximated by a first-order resistance-capacitor transfer function in the electrolyte phase. The Ohmic resistances and electrochemical reaction kinetics resistance are simplified to a lumped Ohmic resistance parameter. Overall, the number of model parameters is reduced from 30 to 9, yet the accuracy of the model is still guaranteed. In order to address the dynamics of phase-change phenomenon in the active particle during charging and discharging, variable solid-state diffusivity is taken into consideration in the model. Also, the observability of the model is analyzed on two types of lithium ion batteries subsequently. Results show the fractional order model with variable solid-state diffusivity agrees very well with experimental data at various current input conditions and is suitable for electric vehicle applications.

Fun Food Experiences for Preschool Children with Handicaps.

ERIC Educational Resources Information Center

Mosiman, Joyce; And Others

The manual includes lesson plans and suggestions for introducting handicapped children to good nutrition through enjoyable activities. Special considerations for specific types of handicaps are briefly noted (including safety considerations for children with physical disabilities). Each lesson is organized according to purpose, teacher objectives,…

Consideration of learning orientations as an application of achievement goals in evaluating life science majors in introductory physics

NASA Astrophysics Data System (ADS)

Mason, Andrew J.; Bertram, Charles A.

2018-06-01

When considering performing an Introductory Physics for Life Sciences course transformation for one's own institution, life science majors' achievement goals are a necessary consideration to ensure the pedagogical transformation will be effective. However, achievement goals are rarely an explicit consideration in physics education research topics such as metacognition. We investigate a sample population of 218 students in a first-semester introductory algebra-based physics course, drawn from 14 laboratory sections within six semesters of course sections, to determine the influence of achievement goals on life science majors' attitudes towards physics. Learning orientations that, respectively, pertain to mastery goals and performance goals, in addition to a learning orientation that does not report a performance goal, were recorded from students in the specific context of learning a problem-solving framework during an in-class exercise. Students' learning orientations, defined within the context of students' self-reported statements in the specific context of a problem-solving-related research-based course implementation, are compared to pre-post results on physics problem-solving items in a well-established attitudinal survey instrument, in order to establish the categories' validity. In addition, mastery-related and performance-related orientations appear to extend to overall pre-post attitudinal shifts, but not to force and motion concepts or to overall course grade, within the scope of an introductory physics course. There also appears to be differentiation regarding overall course performance within health science majors, but not within biology majors, in terms of learning orientations; however, health science majors generally appear to fare less well on all measurements in the study than do biology majors, regardless of learning orientations.

Transonic Flutter Suppression Control Law Design, Analysis and Wind Tunnel Results

NASA Technical Reports Server (NTRS)

Mukhopadhyay, Vivek

1999-01-01

The benchmark active controls technology and wind tunnel test program at NASA Langley Research Center was started with the objective to investigate the nonlinear, unsteady aerodynamics and active flutter suppression of wings in transonic flow. The paper will present the flutter suppression control law design process, numerical nonlinear simulation and wind tunnel test results for the NACA 0012 benchmark active control wing model. The flutter suppression control law design processes using (1) classical, (2) linear quadratic Gaussian (LQG), and (3) minimax techniques are described. A unified general formulation and solution for the LQG and minimax approaches, based on the steady state differential game theory is presented. Design considerations for improving the control law robustness and digital implementation are outlined. It was shown that simple control laws when properly designed based on physical principles, can suppress flutter with limited control power even in the presence of transonic shocks and flow separation. In wind tunnel tests in air and heavy gas medium, the closed-loop flutter dynamic pressure was increased to the tunnel upper limit of 200 psf The control law robustness and performance predictions were verified in highly nonlinear flow conditions, gain and phase perturbations, and spoiler deployment. A non-design plunge instability condition was also successfully suppressed.

Transonic Flutter Suppression Control Law Design, Analysis and Wind-Tunnel Results

NASA Technical Reports Server (NTRS)

Mukhopadhyay, Vivek

1999-01-01

The benchmark active controls technology and wind tunnel test program at NASA Langley Research Center was started with the objective to investigate the nonlinear, unsteady aerodynamics and active flutter suppression of wings in transonic flow. The paper will present the flutter suppression control law design process, numerical nonlinear simulation and wind tunnel test results for the NACA 0012 benchmark active control wing model. The flutter suppression control law design processes using (1) classical, (2) linear quadratic Gaussian (LQG), and (3) minimax techniques are described. A unified general formulation and solution for the LQG and minimax approaches, based on the steady state differential game theory is presented. Design considerations for improving the control law robustness and digital implementation are outlined. It was shown that simple control laws when properly designed based on physical principles, can suppress flutter with limited control power even in the presence of transonic shocks and flow separation. In wind tunnel tests in air and heavy gas medium, the closed-loop flutter dynamic pressure was increased to the tunnel upper limit of 200 psf. The control law robustness and performance predictions were verified in highly nonlinear flow conditions, gain and phase perturbations, and spoiler deployment. A non-design plunge instability condition was also successfully suppressed.

Transonic Flutter Suppression Control Law Design Using Classical and Optimal Techniques with Wind-Tunnel Results

NASA Technical Reports Server (NTRS)

Mukhopadhyay, Vivek

1999-01-01

The benchmark active controls technology and wind tunnel test program at NASA Langley Research Center was started with the objective to investigate the nonlinear, unsteady aerodynamics and active flutter suppression of wings in transonic flow. The paper will present the flutter suppression control law design process, numerical nonlinear simulation and wind tunnel test results for the NACA 0012 benchmark active control wing model. The flutter suppression control law design processes using (1) classical, (2) linear quadratic Gaussian (LQG), and (3) minimax techniques are described. A unified general formulation and solution for the LQG and minimax approaches, based on the steady state differential game theory is presented. Design considerations for improving the control law robustness and digital implementation are outlined. It was shown that simple control laws when properly designed based on physical principles, can suppress flutter with limited control power even in the presence of transonic shocks and flow separation. In wind tunnel tests in air and heavy gas medium, the closed-loop flutter dynamic pressure was increased to the tunnel upper limit of 200 psf. The control law robustness and performance predictions were verified in highly nonlinear flow conditions, gain and phase perturbations, and spoiler deployment. A non-design plunge instability condition was also successfully suppressed.

Workplace design contributions to mental health and well-being.

PubMed

Veitch, Jennifer A

2011-01-01

People spend much of their waking time in their workplaces (approximately 33% on a weekly basis), which raises the possibility that the conditions they experience at work influence their health and well-being. The workplace design literature has given scant attention to mental health outcomes, instead focusing on healthy populations. Conversely, the mental health literature gives scant attention to the potential contribution of workplace design in preventing mental health problems; nor does it provide much insight into facilitating return to work. Taken together, however, the literature does suggest both lines of research and possible interventions. Existing knowledge proposes that workplace design can influence mental health via the effects of light exposure on circadian regulation, social behaviour and affect; the effects of aesthetic judgement on at-work mood and physical well-being and at-home sleep quality; access to nature and recovery from stressful experiences; and privacy regulation and stimulus control. This paper includes a short review of the literature in this area, proposals for new research directions and consideration of the implications of this information on the design choices made by business owners, designers and facility managers. Providing suitable working conditions for all employees avoids stigmatizing employees who have mental health problems, while facilitating prevention and return to work among those who do. Copyright © 2011 Longwoods Publishing.

Shuttle Communications and Tracking, Avionics, and Electromagnetic Compatibility

NASA Technical Reports Server (NTRS)

deSilva, K.; Hwu, Shian; Kindt, Kaylene; Kroll, Quin; Nuss, Ray; Romero, Denise; Schuler, Diana; Sham, Catherine; Scully, Robert

2011-01-01

By definition, electromagnetic compatibility (EMC) is the capability of components, sub-systems, and systems, to operate in their intended electromagnetic environment, within an established margin of safety, and at design levels of performance. Practice of the discipline itself incorporates knowledge of various aspects of applied physics, materials science, and engineering across the board, and includes control and mitigation of undesirable electromagnetic interaction between intentional and unintentional emitters and receivers of radio frequency energy, both within and external to the vehicle; identification and control of the hazards of non-ionizing electromagnetic radiation to personnel, ordnance, and fuels and propellants; and vehicle and system protection from the direct and indirect effects of lightning and various other forms of electrostatic discharge (ESD) threats, such as triboelectrification and plasma charging. EMC is extremely complex and far-reaching, affecting in some degree every aspect of the vehicle s design and operation. The most successful efforts incorporate EMC design features and techniques throughout design and fabrication of the vehicle s structure and components, as well as appropriate operational considerations with regard to electromagnetic threats in the operational environment, from the beginning of the design effort to the end of the life cycle of the manufactured product. This approach yields the highest design performance with the lowest cost and schedule impact.

Statistical physics studies of multilayer adsorption isotherm in food materials and pore size distribution

NASA Astrophysics Data System (ADS)

Aouaini, F.; Knani, S.; Ben Yahia, M.; Ben Lamine, A.

2015-08-01

Water sorption isotherms of foodstuffs are very important in different areas of food science engineering such as for design, modeling and optimization of many processes. The equilibrium moisture content is an important parameter in models used to predict changes in the moisture content of a product during storage. A formulation of multilayer model with two energy levels was based on statistical physics and theoretical considerations. Thanks to the grand canonical ensemble in statistical physics. Some physicochemical parameters related to the adsorption process were introduced in the analytical model expression. The data tabulated in literature of water adsorption at different temperatures on: chickpea seeds, lentil seeds, potato and on green peppers were described applying the most popular models applied in food science. We also extend the study to the newest proposed model. It is concluded that among studied models the proposed model seems to be the best for description of data in the whole range of relative humidity. By using our model, we were able to determine the thermodynamic functions. The measurement of desorption isotherms, in particular a gas over a solid porous, allows access to the distribution of pore size PSD.

Analysis of pre-service physics teacher skills designing simple physics experiments based technology

NASA Astrophysics Data System (ADS)

Susilawati; Huda, C.; Kurniawan, W.; Masturi; Khoiri, N.

2018-03-01

Pre-service physics teacher skill in designing simple experiment set is very important in adding understanding of student concept and practicing scientific skill in laboratory. This study describes the skills of physics students in designing simple experiments based technologicall. The experimental design stages include simple tool design and sensor modification. The research method used is descriptive method with the number of research samples 25 students and 5 variations of simple physics experimental design. Based on the results of interviews and observations obtained the results of pre-service physics teacher skill analysis in designing simple experimental physics charged technology is good. Based on observation result, pre-service physics teacher skill in designing simple experiment is good while modification and sensor application are still not good. This suggests that pre-service physics teacher still need a lot of practice and do experiments in designing physics experiments using sensor modifications. Based on the interview result, it is found that students have high enough motivation to perform laboratory activities actively and students have high curiosity to be skilled at making simple practicum tool for physics experiment.

Flow Distribution Control Characteristics in Marine Gas Turbine Waste- Heat Recovery Systems. Phase 2. Flow Distribution Control in Waste-Heat Steam Generators

DTIC Science & Technology

1982-07-01

waste-heat steam generators. The applicable steam generator design concepts and general design consideration were reviewed and critical problems...a once-through forced-circulation steam generator design should be selected because of stability, reliability, compact- ness and lightweight...consists of three sections and one appendix. In Section I, the applicable steam generator design conccpts and general design * considerations are reviewed

10 CFR 72.182 - Design for physical protection.

Code of Federal Regulations, 2013 CFR

2013-01-01

... Physical Protection § 72.182 Design for physical protection. The design for physical protection must show the site layout and the design features provided to protect the ISFSI or MRS from sabotage. It must... 10 Energy 2 2013-01-01 2013-01-01 false Design for physical protection. 72.182 Section 72.182...

10 CFR 72.182 - Design for physical protection.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Physical Protection § 72.182 Design for physical protection. The design for physical protection must show the site layout and the design features provided to protect the ISFSI or MRS from sabotage. It must... 10 Energy 2 2010-01-01 2010-01-01 false Design for physical protection. 72.182 Section 72.182...

10 CFR 72.182 - Design for physical protection.

Code of Federal Regulations, 2012 CFR

2012-01-01

... Physical Protection § 72.182 Design for physical protection. The design for physical protection must show the site layout and the design features provided to protect the ISFSI or MRS from sabotage. It must... 10 Energy 2 2012-01-01 2012-01-01 false Design for physical protection. 72.182 Section 72.182...

10 CFR 72.182 - Design for physical protection.

Code of Federal Regulations, 2014 CFR

2014-01-01

... Physical Protection § 72.182 Design for physical protection. The design for physical protection must show the site layout and the design features provided to protect the ISFSI or MRS from sabotage. It must... 10 Energy 2 2014-01-01 2014-01-01 false Design for physical protection. 72.182 Section 72.182...

10 CFR 72.182 - Design for physical protection.

Code of Federal Regulations, 2011 CFR

2011-01-01

... Physical Protection § 72.182 Design for physical protection. The design for physical protection must show the site layout and the design features provided to protect the ISFSI or MRS from sabotage. It must... 10 Energy 2 2011-01-01 2011-01-01 false Design for physical protection. 72.182 Section 72.182...

Quasi-experimental designs in practice-based research settings: design and implementation considerations.

PubMed

Handley, Margaret A; Schillinger, Dean; Shiboski, Stephen

2011-01-01

Although randomized controlled trials are often a gold standard for determining intervention effects, in the area of practice-based research (PBR), there are many situations in which individual randomization is not possible. Alternative approaches to evaluating interventions have received increased attention, particularly those that can retain elements of randomization such that they can be considered "controlled" trials. Methodological design elements and practical implementation considerations for two quasi-experimental design approaches that have considerable promise in PBR settings--the stepped-wedge design, and a variant of this design, a wait-list cross-over design, are presented along with a case study from a recent PBR intervention for patients with diabetes. PBR-relevant design features include: creation of a cohort over time that collects control data but allows all participants (clusters or patients) to receive the intervention; staggered introduction of clusters; multiple data collection points; and one-way cross-over into the intervention arm. Practical considerations include: randomization versus stratification, training run in phases; and extended time period for overall study completion. Several design features of practice based research studies can be adapted to local circumstances yet retain elements to improve methodological rigor. Studies that utilize these methods, such as the stepped-wedge design and the wait-list cross-over design, can increase the evidence base for controlled studies conducted within the complex environment of PBR.

The first step in using a robot in brain injury rehabilitation: patients' and health-care professionals' perspective.

PubMed

Boman, Inga-Lill; Bartfai, Aniko

2015-01-01

To evaluate the usability of a mobile telepresence robot (MTR) in a hospital training apartment (HTA). The MTR was manoeuvred remotely and was used for communication when assessing independent living skills, and for security monitoring of cognitively impaired patients. Occupational therapists (OTs) and nurses received training in how to use the MTR. The nurses completed a questionnaire regarding their expectations of using the MTR. OTs and patients staying in the HTA were interviewed about their experiences of the MTR. Interviews and questionnaires were analysed qualitatively. The HTA patients were very satisfied with the MTR. The OTs and nurses reported generally positive experiences. The OT's found that assessment via the MTR was more neutral than being physically present. However, the use of the MTR implied considerable difficulties for health-care professionals. The main obstacle for the nurses was the need for fast and easy access in emergency situations while protecting the patients' integrity. The results indicate that the MTR could be a useful tool to support daily living skills and safety monitoring of HTA patients. However, when designing technology for multiple users, such as health-care professionals, the needs of all users, their routines and support services involved, should also be considered. Implications for Rehabilitation A mobile telepresence robot (MTR) can be a useful tool for assessments and communication in rehabilitation. The design of the robot has to allow easy use by remote users, particularly in emergency situations. When designing MTRs the needs of ALL users have to be taken into consideration.

Fort Hood Solar Total Energy Project. Volume II. Preliminary design. Part 1. System criteria and design description. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

None,

1979-01-01

This volume documents the preliminary design developed for the Solar Total Energy System to be installed at Fort Hood, Texas. Current system, subsystem, and component designs are described and additional studies which support selection among significant design alternatives are presented. Overall system requirements which form the system design basis are presented. These include program objectives; performance and output load requirements; industrial, statutory, and regulatory standards; and site interface requirements. Material in this section will continue to be issued separately in the Systems Requirements Document and maintained current through revision throughout future phases of the project. Overall system design and detailedmore » subsystem design descriptions are provided. Consideration of operation and maintenance is reflected in discussion of each subsystem design as well as in an integrated overall discussion. Included are the solar collector subsystem; the thermal storage subsystem, the power conversion sybsystem (including electrical generation and distribution); the heating/cooling and domestic hot water subsystems; overall instrumentation and control; and the STES building and physical plant. The design of several subsystems has progressed beyond the preliminary stage; descriptions for such subsystems are therefore provided in more detail than others to provide complete documentation of the work performed. In some cases, preliminary design parameters require specific verificaton in the definitive design phase and are identified in the text. Subsystem descriptions will continue to be issued and revised separately to maintain accuracy during future phases of the project. (WHK)« less

Habitat Design Considerations for Implementing Solar Particle Event Radiation Protection

NASA Technical Reports Server (NTRS)

Simon, Mathew A.; Clowdsley, Martha S.; Walker, Steven A.

2013-01-01

Radiation protection is an important habitat design consideration for human exploration missions beyond Low Earth Orbit. Fortunately, radiation shelter concepts can effectively reduce astronaut exposure for the relatively low proton energies of solar particle events, enabling moderate duration missions of several months before astronaut exposure (galactic cosmic ray and solar particle event) approaches radiation exposure limits. In order to minimize habitat mass for increasingly challenging missions, design of radiation shelters must minimize dedicated, single-purpose shielding mass by leveraging the design and placement of habitat subsystems, accommodations, and consumables. NASA's Advanced Exploration Systems RadWorks Storm Shelter Team has recently designed and performed radiation analysis on several low dedicated mass shelter concepts for a year-long mission. This paper describes habitat design considerations identified during the study's radiation analysis. These considerations include placement of the shelter within a habitat for improved protection, integration of human factors guidance for sizing shelters, identification of potential opportunities for habitat subsystems to compromise on individual subsystem performances for overall vehicle mass reductions, and pre-configuration of shelter components for reduced deployment times.

Dust Interactions on Small Solar System Bodies and Technology Considerations for Exploration

NASA Technical Reports Server (NTRS)

Kobrick, Ryan,; Hoffman, Jeffrey; Pavone, Marco; Street, Kenneth; Rickman, Douglas

2014-01-01

Small-bodies such as asteroids and Mars' moons Phobos and Deimos have relatively unknown regolith environments. It is hypothesized that dust preserved in the regolith on the surfaces will have similar mechanical properties to lunar dust because of similar formation processes from micrometeorite bombardment, low relative gravity for slow settling times, and virtually no weathering because there is no atmosphere. This combination of processes infers that small-body dust particles will be highly angular and retain abrasive properties. The focus of this paper uses the mission architecture and engineering design for an asteroid hopper known as Hedgehog, a spherical spacecraft with several symmetric spikes used to aid with tumbling mobility in a low gravity environment. Dust abrasion considerations are highlighted throughout the paper relating to the lead authors' previous work, but act as an example of one of many important dust or regolith physical properties that need to be considered for future exploration. Measurable regolith properties are summarized in order to identify technologies that may be useful for exploration in terms of scientific return and spacecraft design. Previous instruments are summarized in this paper that could be used on the Hedgehog. Opportunities for hardware payloads are highlighted that include low mass solutions or dualpurpose instruments that can measure regolith or dust properties. Finally, dust mitigation suggestions are made for vehicles of this mobility profile.

Mental and behavioral health environments: critical considerations for facility design.

PubMed

Shepley, Mardelle McCuskey; Watson, Angela; Pitts, Francis; Garrity, Anne; Spelman, Elizabeth; Kelkar, Janhawi; Fronsman, Andrea

2016-01-01

The purpose of the study was to identify features in the physical environment that are believed to positively impact staff and patients in psychiatric environments and use these features as the foundation for future research regarding the design of mental and behavioral health facilities. Pursuant to a broad literature review that produced an interview script, researchers conducted 19 interviews of psychiatric staff, facility administrators and architects. Interview data were analyzed using the highly structured qualitative data analysis process authored by Lincoln and Guba (1985). Seventeen topics were addressed ranging from the importance of a deinstitutionalized environment to social interaction and autonomy. The interviewees reinforced the controversy that exists around the implications of a deinstitutionalized environment, when the resulting setting diminishes patient and staff safety. Respondents tended to support open nurse stations vs. enclosed stations. Support for access to nature and the provision of an aesthetic environment was strong. Most interviewees asserted that private rooms were highly desirable because lower room density reduces the institutional character of a unit. However, a few interviewees adamantly opposed private rooms because they considered the increased supervision of one patient by another to be a deterrent to self-harm. The need to address smoking rooms in future research received the least support of all topics. Responses of interviews illustrate current opinion regarding best practice in the design of psychiatric facilities. The findings emphasize the need for more substantive research on appropriate physical environments in mental and behavioral health settings. Copyright © 2016 Elsevier Inc. All rights reserved.

Students mentoring students in a service-learning clinical supervision experience: an educational case report.

PubMed

Lattanzi, Jill Black; Campbell, Sandra L; Dole, Robin L; Palombaro, Kerstin M

2011-10-01

Service-learning projects present the opportunity to combine academic skill practice and peer mentorship with meaningful community service. Implicit learning outcomes include an enhanced understanding of social responsibility and professional development-concepts difficult to teach in the classroom. The purpose of this educational case report is to describe the development, application, and outcomes of a service-learning project designed to facilitate peer mentorship and the development of social responsibility. DEVELOPMENT OF THE PROCESS: Widener University mandated that all programs offer student community service opportunities on Martin Luther King Day. In response, the physical therapy program developed a plan to clean and screen assistive and mobility devices and provide blood pressure screening at designated community sites. APPLICATION OF THE PROCESS: All faculty and all members of the first-year and third-year Doctor of Physical Therapy (DPT) classes participated. The students and a faculty member traveled to designated community sites in teams. First-year students were able to practice newly acquired skills under the supervision and peer mentorship of third-year students. Outcomes of the service-learning project were assessed through a tally of services rendered, measurement of curricular goal achievement, a survey of the community partners' satisfaction with the event, and consideration of both first-year and third-year DPT student reflection papers. The service-learning project was effective in meeting a community need, enhancing community partner relationships, fostering student understandings of social responsibility, and creating a valuable peer mentorship experience.

Canted-Cosine-Theta Superconducting Accelerator Magnets for High Energy Physics and Ion Beam Cancer Therapy

NASA Astrophysics Data System (ADS)

Brouwer, Lucas Nathan

Advances in superconducting magnet technology have historically enabled the construction of new, higher energy hadron colliders. Looking forward to the needs of a potential future collider, a significant increase in magnet field and performance is required. Such a task requires an open mind to the investigation of new design concepts for high field magnets. Part I of this thesis will present an investigation of the Canted-Cosine-Theta (CCT) design for high field Nb3Sn magnets. New analytic and finite element methods for analysis of CCT magnets will be given, along with a discussion on optimization of the design for high field. The design, fabrication, and successful test of the 2.5 T NbTi dipole CCT1 will be presented as a proof-of-principle step towards a high field Nb3Sn magnet. Finally, the design and initial steps in the fabrication of the 16 T Nb3Sn dipole CCT2 will be described. Part II of this thesis will investigate the CCT concept extended to a curved magnet for use in an ion beam therapy gantry. The introduction of superconducting technology in this field shows promise to reduce the weight and cost of gantries, as well as open the door to new beam optics solutions with high energy acceptance. An analytic approach developed for modeling curved CCT magnets will be presented, followed by a design study of a superconducting magnet for a proton therapy gantry. Finally, a new magnet concept called the "Alternating Gradient CCT" (AG-CCT) will be introduced. This concept will be shown to be a practical magnet solution for achieving the alternating quadrupole fields desired for an achromatic gantry, allowing for the consideration of treatment with minimal field changes in the superconducting magnets. The primary motivation of this thesis is to share new developments for Canted-Cosine-Theta superconducting magnets, with the hope this design will improve technology for high energy physics and ion beam cancer therapy.

Design, Specification, and Synthesis of Aircraft Electric Power Systems Control Logic

NASA Astrophysics Data System (ADS)

Xu, Huan

Cyber-physical systems integrate computation, networking, and physical processes. Substantial research challenges exist in the design and verification of such large-scale, distributed sensing, actuation, and control systems. Rapidly improving technology and recent advances in control theory, networked systems, and computer science give us the opportunity to drastically improve our approach to integrated flow of information and cooperative behavior. Current systems rely on text-based specifications and manual design. Using new technology advances, we can create easier, more efficient, and cheaper ways of developing these control systems. This thesis will focus on design considerations for system topologies, ways to formally and automatically specify requirements, and methods to synthesize reactive control protocols, all within the context of an aircraft electric power system as a representative application area. This thesis consists of three complementary parts: synthesis, specification, and design. The first section focuses on the synthesis of central and distributed reactive controllers for an aircraft elec- tric power system. This approach incorporates methodologies from computer science and control. The resulting controllers are correct by construction with respect to system requirements, which are formulated using the specification language of linear temporal logic (LTL). The second section addresses how to formally specify requirements and introduces a domain-specific language for electric power systems. A software tool automatically converts high-level requirements into LTL and synthesizes a controller. The final sections focus on design space exploration. A design methodology is proposed that uses mixed-integer linear programming to obtain candidate topologies, which are then used to synthesize controllers. The discrete-time control logic is then verified in real-time by two methods: hardware and simulation. Finally, the problem of partial observability and dynamic state estimation is explored. Given a set placement of sensors on an electric power system, measurements from these sensors can be used in conjunction with control logic to infer the state of the system.

How architectural design affords experiences of freedom in residential care for older people.

PubMed

Van Steenwinkel, Iris; Dierckx de Casterlé, Bernadette; Heylighen, Ann

2017-04-01

Human values and social issues shape visions on dwelling and care for older people, a growing number of whom live in residential care facilities. These facilities' architectural design is considered to play an important role in realizing care visions. This role, however, has received little attention in research. This article presents a case study of a residential care facility for which the architects made considerable effort to match the design with the care vision. The study offers insights into residents' and caregivers' experiences of, respectively, living and working in this facility, and the role of architectural features therein. A single qualitative case study design was used to provide in-depth, contextual insights. The methods include semi-structured interviews with residents and caregivers, and participant observation. Data concerning design intentions, assumptions and strategies were obtained from design documents, through a semi-structured interview with the architects, and observations on site. Our analysis underlines the importance of freedom (and especially freedom of movement), and the balance between experiencing freedom and being bound to a social and physical framework. It shows the architecture features that can have a role therein: small-scaleness in terms of number of residents per dwelling unit, size and compactness; spatial generosity in terms of surface area, room to maneuver and variety of places; and physical accessibility. Our study challenges the idea of family-like group living. Since we found limited sense of group belonging amongst residents, our findings suggest to rethink residential care facilities in terms of private or collective living in order to address residents' social freedom of movement. Caregivers associated 'hominess' with freedom of movement, action and choice, with favorable social dynamics and with the building's residential character. Being perceived as homey, the facility's architectural design matches caregivers' care vision and, thus, helped them realizing this vision. Copyright © 2017 Elsevier Inc. All rights reserved.

The devil that we know: lead (Pb) replacement policies under conditions of scientific uncertainty

NASA Technical Reports Server (NTRS)

Ogunseitan, Dele; Schoenung, Julie; Saphores, Jean-Daniel; Shapiro, Andrew; Bhuie, Amrit; Kang, Hai-Yong; Nixon, Hilary; Stein, Antionette

2003-01-01

Engineering and economic considerations are typical driving forces behind the selection of specific chemicals used in the manufacture of consumer products. Only recently has post-consumer environmental impact become part of the major considerations during the initial phases of product design. Therefore, reactive, rather than proactive strategies have dominated the consideration of environmental and health issues in product design.

Characteristics of highly successful orthopedic surgeons: a survey of orthopedic chairs and editors

PubMed Central

Klein, Guy; Hussain, Nasir; Sprague, Sheila; Mehlman, Charles T.; Dogbey, Godwin; Bhandari, Mohit

2013-01-01

Background Highly successful orthopedic surgeons are a small group of individuals who exert a large influence on the orthopedic field. However, the characteristics of these leaders have not been well-described or studied. Methods Orthopedic surgeons who are departmental chairs, journal editors, editorial board members of the Journal of Bone and Joint Surgery (British edition), or current or past presidents of major orthopedic associations were invited to complete a survey designed to provide insight into their motivations, academic backgrounds and accomplishments, emotional and physical health, and job satisfaction. Results In all, 152 surgeons completed the questionnaire. We identified several characteristics of highly successful surgeons. Many have contributed prolific numbers of publications and book chapters and obtained considerable funding for research. They were often motivated by a “desire for personal development (interesting challenge, new opportunities),” whereas “relocating to a new institution, financial gain, or lack of alternative candidates” played little to no role in their decisions to take positions of leadership. Most respondents were happy with their specialty choice despite long hours and high levels of stress. Despite challenges to their time, successful orthopedic surgeons made a strong effort to maintain their health; compared with other physicians, they exercise more, are more likely to have a primary care physician and feel better physically. Conclusion Departmental chairs, journal editors and presidents of orthopedic associations cope with considerable demands of clinical, administrative, educational and research duties while maintaining a high level of health, happiness and job satisfaction. PMID:23706848

Human respiratory considerations for civil transport aircraft oxygen system.

DOT National Transportation Integrated Search

1978-01-01

This report is intended to acquaint personnel involved in the design, inspection, and maintenance of civil transport oxygen systems with the human respiratory requirements and oxygen system design considerations necessary to effect an interface and p...

Physical Therapist, Physical Therapist Assistant, and Student Response to Inappropriate Patient Sexual Behavior: Results of a National Survey.

PubMed

Cambier, Ziádee; Boissonnault, Jill S; Hetzel, Scott J; Plack, Margaret M

2018-06-08

A recent survey found that 84% of physical therapist, physical therapist assistant, and student respondents experienced inappropriate patient sexual behavior (IPSB) over their careers and 47% over the prior 12 months. Prevalence data justify consideration of how to address IPSB. The objective was to determine how physical therapist clinicians (used here to mean physical therapists, physical therapist assistants, and students) address IPSB and examine strategy impact. The design was observational and cross-sectional. Several sections of the American Physical Therapy Association and selected education programs fielded the electronic survey. Respondents reported on IPSB strategy frequency and effect. Response-strategy impact was tested for statistical significance. Open-ended comments were analyzed using qualitative methods. Of 1027 respondents, 396 had experienced IPSB over the prior 12 months; 391 provided data on the frequency and effect of response strategies used. Common informal responses included distraction, ignoring IPSB, and altering treatment to avoid physical contact or being alone. Common formal responses included reporting the behavior within the facility and documenting the behavior. Successful strategies included distraction, avoidance, direct confrontation, behavioral contracts, transfer of care, and chaperone use. Experienced clinicians were more likely to be direct, whereas novice clinicians were more likely to engage in unsuccessful actions of ignoring and joking. Limitations included self-report, clinician memory, and convenience sampling. The first findings in 20 years on physical therapist, physical therapist assistant, and student response to IPSB provide direction for the profession. Results indicate a need for clear workplace policies coupled with training for managers and supervisors to support clinicians in resolving IPSB. Policies on using behavioral contracts, chaperones, and transfer of care could empower staff to consider these successful options. Professional education and training for all physical therapy professionals on assertive communication and redirection strategies with IPSB appears warranted.

20 CFR 405.373 - Requesting consideration of new evidence.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 20 Employees' Benefits 2 2010-04-01 2010-04-01 false Requesting consideration of new evidence. 405.373 Section 405.373 Employees' Benefits SOCIAL SECURITY ADMINISTRATION ADMINISTRATIVE REVIEW PROCESS... you; (2) You had a physical, mental, educational, or linguistic limitation(s) that prevented you from...

Benefits of Operational Consideration into the Guidance, Navigation, and Control Design of Spacecraft

NASA Technical Reports Server (NTRS)

Morris, Mark C.; Holt, Greg N.

2011-01-01

The following paper points out historical examples where operational consideration into the GN&C design could have helped avoid operational complexity, reduce costs, ensure the ability for a GN&C system to be able to adapt to failures, and in some cases might have helped save mission objectives. A costly repeat of mistakes could befall a program if previous operational lessons, especially from operators of vehicles with similar GN&C systems, are not considered during the GN&C design phase of spacecraft. The information gained from operational consideration during the design can lead to improvements of the design, allow less ground support during operations, and prevent repetition of previous mistakes. However, this benefit can only occur if spacecraft operators adequately capture lessons learned that would improve future designs for operations and those who are designing spacecraft incorporate inputs from those that have previously operated similar GN&C systems.

Psychological abuse: a variable deserving critical attention in domestic violence.

PubMed

O'Leary, K D

1999-01-01

Policy makers and researchers give psychological abuse considerably less attention than physical abuse in the partner abuse area. One reason for the relative neglect of psychological abuse is that there are difficulties in arriving at a common definition of psychological abuse that might be useful to both the mental health and legal professions. Another reason for the relative neglect of psychological abuse has been an implicit assumption that physical abuse exacts a greater psychological toll on victims than does psychological abuse. At the extreme level of physical abuse, this assumption seems defensible, but at levels of physical aggression that are most common in marriage and long-term relationships, psychological abuse appears to have as great an impact as physical abuse. Even direct ratings of psychological and physical abuse by women in physically abusive relationships indicate that psychological abuse has a greater adverse effect on them than physical abuse. Retrospective reports, longitudinal research, and treatment dropout research all provide evidence that psychological abuse can exact a negative effect on relationships that is as great as that of physical abuse. Finally, psychological abuse almost always precedes physical abuse, so that prevention and treatment efforts clearly need to address psychological abuse. Eight measures of various forms of psychological abuse that have reasonable psychometric properties and considerable construct validity are reviewed and a definition of psychological abuse in intimate relations is provided.

Geometric asymmetry driven Janus micromotors

NASA Astrophysics Data System (ADS)

Zhao, Guanjia; Pumera, Martin

2014-09-01

The production and application of nano-/micromotors is of great importance. In order for the motors to work, asymmetry in their chemical composition or physical geometry must be present if no external asymmetric field is applied. In this paper, we present a ``coconut'' micromotor made of platinum through the partial or complete etching of the silica templates. It was shown that although both the inner and outer surfaces are made of the same material (Pt), motion of the structure can be observed as the convex surface is capable of generating oxygen bubbles. This finding shows that not only the chemical asymmetry of the micromotor, but also its geometric asymmetry can lead to fast propulsion of the motor. Moreover, a considerably higher velocity can be seen for partially etched coconut structures than the velocities of Janus or fully etched, shell-like motors. These findings will have great importance on the design of future micromotors.The production and application of nano-/micromotors is of great importance. In order for the motors to work, asymmetry in their chemical composition or physical geometry must be present if no external asymmetric field is applied. In this paper, we present a ``coconut'' micromotor made of platinum through the partial or complete etching of the silica templates. It was shown that although both the inner and outer surfaces are made of the same material (Pt), motion of the structure can be observed as the convex surface is capable of generating oxygen bubbles. This finding shows that not only the chemical asymmetry of the micromotor, but also its geometric asymmetry can lead to fast propulsion of the motor. Moreover, a considerably higher velocity can be seen for partially etched coconut structures than the velocities of Janus or fully etched, shell-like motors. These findings will have great importance on the design of future micromotors. Electronic supplementary information (ESI) available: Additional SEM images, data analysis, Videos S-1 and S-2. See DOI: 10.1039/c4nr02393e

Sports doping in the adolescent: the Faustian conundrum of Hors de Combat.

PubMed

Greydanus, Donald E; Patel, Dilip R

2010-06-01

The drive toward success in sports and the need for a cosmetically acceptable appearance have driven many adolescents to take a wide variety of so-called doping substances. The consumption of these chemicals in the hope and hype of improved sports performance, fueled by the easing of government restrictions on their proof of safety and efficacy, has resulted in an explosion of so-called ergogenic products available to our youth. Agents that have been used include anabolic steroids, anabolic-like agents, designer steroids, creatine, protein and amino acid supplements, minerals, antioxidants, stimulants, blood doping, erythropoietin, beta-blockers, and others. The use of these agents has considerable potential to cause physical and psychological damage. Use and misuse of drugs in this sports doping process should be discouraged. This discussion reviews some of the agents that are currently being used. Clinicians providing sports medicine care to youth, whether through anticipatory guidance or direct sports medicine management, should educate their young patients about the hype and hyperbole of these products that may keep them out instead of in the game at considerable financial cost to the unwary consumer.

GNSS-ISR data fusion: General framework with application to the high-latitude ionosphere

NASA Astrophysics Data System (ADS)

Semeter, Joshua; Hirsch, Michael; Lind, Frank; Coster, Anthea; Erickson, Philip; Pankratius, Victor

2016-03-01

A mathematical framework is presented for the fusion of electron density measured by incoherent scatter radar (ISR) and total electron content (TEC) measured using global navigation satellite systems (GNSS). Both measurements are treated as projections of an unknown density field (for GNSS-TEC the projection is tomographic; for ISR the projection is a weighted average over a local spatial region) and discrete inverse theory is applied to obtain a higher fidelity representation of the field than could be obtained from either modality individually. The specific implementation explored herein uses the interpolated ISR density field as initial guess to the combined inverse problem, which is subsequently solved using maximum entropy regularization. Simulations involving a dense meridional network of GNSS receivers near the Poker Flat ISR demonstrate the potential of this approach to resolve sub-beam structure in ISR measurements. Several future directions are outlined, including (1) data fusion using lower level (lag product) ISR data, (2) consideration of the different temporal sampling rates, (3) application of physics-based regularization, (4) consideration of nonoptimal observing geometries, and (5) use of an ISR simulation framework for optimal experiment design.

Misconceptions on Classical Mechanics by Freshman University Students: A Case Study in a Physics Department in Greece

ERIC Educational Resources Information Center

Stylos, George; Evangelakis, George A.; Kotsis, Konstantinos T.

2008-01-01

This paper presents results of an empirical research study on Newton's laws classical mechanics and its perceptions on freshman students at the Physics Department, University of Ioannina, Greece. Results and outcome measures reveal misconceptions on students' perceptions in consideration of the fundamental concepts in freshman Physics education.…

THE PHYSICAL ASPECTS OF URBANIZATION, PHYSICAL CONSIDERATIONS IN COMMUNITY ACTION. KANSAS STATE UNIVERSITY SHORT COURSE SERIES IN PLANNING AND DEVELOPMENT, 5.

ERIC Educational Resources Information Center

MCGRAW, EUGENE T.

PART OF A KANSAS STATE UNIVERSITY SERIES ON COMMUNITY PLANNING AND DEVELOPMENT, THIS MONOGRAPH DESCRIBES AND DEFINES THE NATURE OF URBAN CENTERS AS PHYSICAL ENTITIES. BASIC LAND USE CATEGORIES AND SUBDIVISIONS, FUNCTIONAL CLASSIFICATIONS OF COMMUNITIES IN THE UNITED STATES (MANUFACTURING, RETAIL, WHOLESALE, DIVERSIFIED, TRANSPORTATION, MINING,…

78 FR 15009 - Consideration of Withdrawal From Commercial Production and Distribution of the Radioisotope...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-08

... may be addressed to: Dr. Marc Garland, Program Manager, Office of Nuclear Physics, Office of Science... Management Division, Office of Nuclear Physics, Office of Science, U.S. Department of Energy, Germantown..., Office of Nuclear Physics, Office of Science. [FR Doc. 2013-05444 Filed 3-7-13; 8:45 am] BILLING CODE...

Creating Library Interiors: Planning and Design Considerations.

ERIC Educational Resources Information Center

Jones, Plummer Alston, Jr.; Barton, Phillip K.

1997-01-01

Examines design considerations for public library interiors: access; acoustical treatment; assignable and nonassignable space; building interiors: ceilings, clocks, color, control, drinking fountains; exhibit space: slotwall display, floor coverings, floor loading, furniture, lighting, mechanical systems, public address, copying machines,…

Design and Manufacturing Considerations for Shockproof and Corrosion-Immune Superelastic Nickel-Titanium Bearings for a Space Station Application

NASA Technical Reports Server (NTRS)

DellaCorte, Christopher; Wozniak, Walter A.

2012-01-01

An intermetallic nickel-titanium alloy, 60NiTi (60wt%Ni, 40wt%Ti), is a promising tribological material for space mechanisms. 60NiTi offers a broad combination of physical properties that make it unique among bearing materials. 60NiTi is hard, electrically conductive, highly corrosion resistant, readily machined prior to final heat treatment, easily lubricated and is non-magnetic. It also falls within the class of superelastic alloys and can elastically endure large strains (beyond 5 percent) making it highly resistant to excessive and unexpected (shock) loads. Key material properties and characteristics such as elastic modulus, tensile fracture sensitivity and residual stress behavior, however, differ from conventional alloys such as steel and this significantly affects bearing design and manufacturing. In this paper, the preliminary design and manufacture of ball bearings made from 60NiTi are considered for a highly corrosive, lightly loaded, low speed bearing application found inside the International Space Station s water recycling system. The information presented is expected to help guide more widespread commercialization of this new technology into space mechanism and other applications.

Optimization of helicopter airframe structures for vibration reduction considerations, formulations and applications

NASA Technical Reports Server (NTRS)

Murthy, T. Sreekanta

1988-01-01

Several key issues involved in the application of formal optimization technique to helicopter airframe structures for vibration reduction are addressed. Considerations which are important in the optimization of real airframe structures are discussed. Considerations necessary to establish relevant set of design variables, constraints and objectives which are appropriate to conceptual, preliminary, detailed design, ground and flight test phases of airframe design are discussed. A methodology is suggested for optimization of airframes in various phases of design. Optimization formulations that are unique to helicopter airframes are described and expressions for vibration related functions are derived. Using a recently developed computer code, the optimization of a Bell AH-1G helicopter airframe is demonstrated.

Applying evolutionary psychology to a serious game about children's interpersonal conflict.

PubMed

Ingram, Gordon P D; Campos, Joana; Hondrou, Charline; Vasalou, Asimina; Martinho, Carlos; Joinson, Adam

2012-12-20

This article describes the use of evolutionary psychology to inform the design of a serious computer game aimed at improving 9-12-year-old children's conflict resolution skills. The design of the game will include dynamic narrative generation and emotional tagging, and there is a strong evolutionary rationale for the effect of both of these on conflict resolution. Gender differences will also be taken into consideration in designing the game. In interview research in schools in three countries (Greece, Portugal, and the UK) aimed at formalizing the game requirements, we found that gender differences varied in the extent to which they applied cross-culturally. Across the three countries, girls were less likely to talk about responding to conflict with physical aggression, talked more about feeling sad about conflict and about conflicts over friendship alliances, and talked less about conflicts in the context of sports or games. Predicted gender differences in anger and reconciliation were not found. Results are interpreted in terms of differing underlying models of friendship that are motivated by parental investment theory. This research will inform the design of the themes that we use in game scenarios for both girls and boys.

Space bioreactor: Design/process flow

NASA Technical Reports Server (NTRS)

Cross, John H.

1987-01-01

The design of the space bioreactor stems from three considerations. First, and foremost, it must sustain cells in microgravity. Closely related is the ability to take advantage of the weightlessness and microgravity. Lastly, it should fit into a bioprocess. The design of the space bioreactor is described in view of these considerations. A flow chart of the bioreactor is presented and discussed.

Philosophical midwifery and the birthpangs of modern cosmology

NASA Astrophysics Data System (ADS)

Gale, George; Urani, John

1993-01-01

Philosophical considerations sometimes direct developments in physics. Such influence most frequently operates during the genesis of new fields. The birth of modern cosmology provides clear evidence of the interaction between philosophical issues and the shape and direction of a new physical discipline. Philosophical controversy between E. A. Milne and other astrophysicists, including A. S. Eddington, James Jeans, and H. P. Robertson, directly affected the models, methods, and very nature of cosmological science for future generations. Today's standard space-time metric, for example, resulted from responses by Robertson and A. G. Walker to philosophical challenges presented in Milne's proposals to scrap the very idea of expanding ``space.'' Analysis of published works, unpublished manuscripts and correspondence, and personal interviews illustrates the role philosophical considerations played in development of this new field in physics.

Logistics in the Computer Lab.

ERIC Educational Resources Information Center

Cowles, Jim

1989-01-01

Discusses ways to provide good computer laboratory facilities for elementary and secondary schools. Topics discussed include establishing the computer lab and selecting hardware; types of software; physical layout of the room; printers; networking possibilities; considerations relating to the physical environment; and scheduling methods. (LRW)

Integrating Physically Handicapped Pupils.

ERIC Educational Resources Information Center

Hodgson, Ann

1984-01-01

Intended for regular class teachers working with mainstreamed physically handicapped pupils, the article offers guidelines regarding school organization, conditions directly affecting the pupil, and classroom considerations. A brief review of the major conditions (such as allergies, cerebral palsy, and muscular dystrophy) is presented. (CL)

Design Development Analyses in Support of a Heatpipe-Brayton Cycle Heat Exchanger

NASA Technical Reports Server (NTRS)

Steeve, Brian E.; Kapernick, Richard J.

2004-01-01

One of the power systems under consideration for nuclear electric propulsion or as a planetary surface power source is a heatpipe-cooled reactor coupled to a Brayton cycle. In this system, power is transferred from the heatpipes to the Brayton gas via a heat exchanger attached to the heatpipes. This paper discusses the fluid, thermal and structural analyses that were performed in support of the design of the heat exchanger to be tested in the SAFE-100 experimental program at the Marshall Space Flight Center: An important consideration throughout the design development of the heat exchanger w its capability to be utilized for higher power and temperature applications. This paper also discusses this aspect of the design and presents designs for specific applications that are under consideration.

Fathers’ perspectives on the diets and physical activity behaviours of their young children

PubMed Central

Hesketh, Kylie D.; van der Pligt, Paige; Cameron, Adrian J.; Crawford, David; Campbell, Karen J.

2017-01-01

Background Children’s learning about food and physical activity is considerable during their formative years, with parental influence pivotal. Research has focused predominantly on maternal influences with little known about the relationships between fathers’ and young children’s dietary and physical activity behaviours. A greater understanding of paternal beliefs regarding young children’s dietary and physical activity behaviours is important to inform the design and delivery of child-focussed health promotion interventions. This study aimed to describe fathers’ perceived roles in their children’s eating and physical activity behaviours. It also sought to document fathers’ views regarding how they could be best supported to promote healthy eating and physical activity behaviours in their young children. Methods In depth, semi-structured interviews were conducted with twenty fathers living in socio-economically diverse areas of metropolitan Melbourne, Australia who had at least one child aged five years or less. All interviews were audio recorded, transcribed verbatim and thematically analysed. Results Thematic analysis of the transcripts revealed eight broad themes about fathers’ beliefs, perceptions and attitudes towards the dietary and physical activity behaviours of their young children: (i) shared responsibility and consultation; (ii) family meal environment; (iii) parental role modelling; (iv) parental concerns around food; (v) food rewards; (vi) health education; (vii) limiting screen time; and (viii) parental knowledge. Analysis of themes according to paternal education/employment revealed no substantial differences in the views of fathers. Conclusions This exploratory study presents the views of a socio-economically diverse group of fathers regarding the dietary and physical activity behaviours of their young children and the insights into the underlying perceptions informing these views. The findings suggest that fathers believe healthy eating behaviours and being physically active are important for their young children. Fathers believe these behaviours can be promoted and supported in different ways including through the provision of appropriate meal and physical activity environments and parental role modelling of desired dietary and physical activity behaviours. PMID:28604810

'On Your Feet to Earn Your Seat', a habit-based intervention to reduce sedentary behaviour in older adults: study protocol for a randomized controlled trial.

PubMed

Gardner, Benjamin; Thuné-Boyle, Ingela; Iliffe, Steve; Fox, Kenneth R; Jefferis, Barbara J; Hamer, Mark; Tyler, Nick; Wardle, Jane

2014-09-20

Many older adults are both highly sedentary (that is, spend considerable amounts of time sitting) and physically inactive (that is, do little physical activity). This protocol describes an exploratory trial of a theory-based behaviour change intervention in the form of a booklet outlining simple activities ('tips') designed both to reduce sedentary behaviour and to increase physical activity in older adults. The intervention is based on the 'habit formation' model, which proposes that consistent repetition leads to behaviour becoming automatic, sustaining activity gains over time. The intervention is being developed iteratively, in line with Medical Research Council complex intervention guidelines. Selection of activity tips was informed by semi-structured interviews and focus groups with older adults, and input from a multidisciplinary expert panel. An ongoing preliminary field test of acceptability among 25 older adults will inform further refinement. An exploratory randomized controlled trial will be conducted within a primary care setting, comparing the tips booklet with a control fact sheet. Retired, inactive and sedentary adults (n = 120) aged 60 to 74 years, with no physical impairments precluding light physical activity, will be recruited from general practices in north London, UK. The primary outcomes are recruitment and attrition rates. Secondary outcomes are changes in behaviour, habit, health and wellbeing over 12 weeks. Data will be used to inform study procedures for a future, larger-scale definitive randomized controlled trial. Current Controlled Trials ISRCTN47901994.

Investigating approaches to diversity in a national survey of physics doctoral degree programs: The graduate admissions landscape

NASA Astrophysics Data System (ADS)

Potvin, Geoff; Chari, Deepa; Hodapp, Theodore

2017-12-01

Graduate admissions play a critical gatekeeping role in the physics community not only because they select students who are allowed to begin their graduate studies, but also because they influence how students perceive graduate school, and in some cases whether or not they will even choose to apply. In conjunction with the APS Bridge Program, we conducted a national survey of graduate directors (and related faculty) of physics Ph.D. programs in the United States to explore graduate admissions practices. Our focus was on criteria used in determining admissions, mechanisms through which graduate applicants are handled, and how student representation considerations are incorporated into admissions (if at all). We report here on existing graduate admission practices in physics departments and highlight some critical issues for understanding barriers for diversifying graduate physics, including the use of GRE scores (and the relative importance placed on them). We find that the use of a minimum GRE score for admission, a practice in opposition to recommendations made by the tests designers, is reported to be used in many departments (more than one in three). We also find letters of recommendation to be highly valued in admissions decisions. Our data describe various initiatives at the institutional or individual level to increase gender diversity in admissions. A sizable number of departments also express a latent demand for greater numbers of students from traditionally marginalized racial or ethnic groups, but simultaneously report a lack of such applicants.

Design and Management of an IMC Micro Center.

ERIC Educational Resources Information Center

Bunson, Stanley N.

1988-01-01

Outlines design and management factors to be considered when developing a microcomputer lab for an instructional media center (IMC). Highlights include environmental considerations, including spatial arrangements, furniture, power requirements, temperature control, and lighting; software and hardware acquisition; and administrative considerations,…

Community-based interventions to promote increased physical activity: a primer.

PubMed

Bopp, Melissa; Fallon, Elizabeth

2008-01-01

Current recommendations, based on an abundance of empirical data documenting the impact of physical activity (PA) on preventing morbidity and mortality associated with common chronic diseases, indicate that adults should accumulate 30 minutes of moderate-intensity PA > or =5 days per week. However, worldwide rates of PA remain low, indicating a great need for large-scale implementation of evidence-based PA interventions. We briefly present practical aspects of intervention planning, implementation and evaluation within common community settings. The first stage of intervention planning is formative research, which allows for a better understanding of the elements needed for a successful intervention. Partnering with community settings (schools, worksites, faith-based organizations and healthcare organizations) offers many benefits and the opportunity to reach specific populations. Setting-based approaches allow for multilevel strategies, ranging from individual-based programmes and educational initiatives to physical and social environmental changes. Various settings such as healthcare, worksite, and school- and community-based settings are discussed. Intervention delivery methods and strategies can range, depending on the population and setting targeted, from small-group approaches to mediated methods (e.g. print, telephone, electronic). The final phase of intervention planning and implementation is evaluation. Several objective and subjective methods of PA assessment are available to determine the effectiveness of the intervention. We have highlighted the need for process evaluation of intervention implementation to provide valuable information for the dissemination and sustainability of successful interventions. Although there are numerous considerations for the design, implementation, assessment and evaluation of PA interventions, the potential for positive impact on the overall health of the public indicates the necessity for programmes designed to increase PA.

Residential design for real life rehabilitation.

PubMed

Kiser, Laura; Zasler, Nathan

2009-01-01

This article provides readers with a review of the major considerations for designing living environments for persons with neurodisability due to acquired brain injury (ABI). Components that need to be considered in order to assure that the environment is designed with a functional perspective in mind are explored. The issues to be considered herein include the influences of cognition and visual and visuoperceptual, motor, behavioral, and sensory impairment on residential design considerations. Resources for individuals involved in residential design for this special population are also provided to facilitate design decisions and implementation.

An integrated optimum design approach for high speed prop-rotors including acoustic constraints

NASA Technical Reports Server (NTRS)

Chattopadhyay, Aditi; Wells, Valana; Mccarthy, Thomas; Han, Arris

1993-01-01

The objective of this research is to develop optimization procedures to provide design trends in high speed prop-rotors. The necessary disciplinary couplings are all considered within a closed loop multilevel decomposition optimization process. The procedures involve the consideration of blade-aeroelastic aerodynamic performance, structural-dynamic design requirements, and acoustics. Further, since the design involves consideration of several different objective functions, multiobjective function formulation techniques are developed.

Mechanics of Ballast Compaction. Volume 2 : Field Methods for Ballast Physical State Measurement

DOT National Transportation Integrated Search

1982-03-01

Field methods for measuring ballast physical state are needed to study the effects of ballast compaction. Following a consideration of various alternatives, three methods were selected for development and evaluation. The first was in-place density, w...