Demonstrating the improvement of predictive maturity of a computational model

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hemez, Francois M; Unal, Cetin; Atamturktur, Huriye S

2010-01-01

We demonstrate an improvement of predictive capability brought to a non-linear material model using a combination of test data, sensitivity analysis, uncertainty quantification, and calibration. A model that captures increasingly complicated phenomena, such as plasticity, temperature and strain rate effects, is analyzed. Predictive maturity is defined, here, as the accuracy of the model to predict multiple Hopkinson bar experiments. A statistical discrepancy quantifies the systematic disagreement (bias) between measurements and predictions. Our hypothesis is that improving the predictive capability of a model should translate into better agreement between measurements and predictions. This agreement, in turn, should lead to a smallermore » discrepancy. We have recently proposed to use discrepancy and coverage, that is, the extent to which the physical experiments used for calibration populate the regime of applicability of the model, as basis to define a Predictive Maturity Index (PMI). It was shown that predictive maturity could be improved when additional physical tests are made available to increase coverage of the regime of applicability. This contribution illustrates how the PMI changes as 'better' physics are implemented in the model. The application is the non-linear Preston-Tonks-Wallace (PTW) strength model applied to Beryllium metal. We demonstrate that our framework tracks the evolution of maturity of the PTW model. Robustness of the PMI with respect to the selection of coefficients needed in its definition is also studied.« less

Cross-comparison of spacecraft-environment interaction model predictions applied to Solar Probe Plus near perihelion

DOE Office of Scientific and Technical Information (OSTI.GOV)

Marchand, R.; Miyake, Y.; Usui, H.

2014-06-15

Five spacecraft-plasma models are used to simulate the interaction of a simplified geometry Solar Probe Plus (SPP) satellite with the space environment under representative solar wind conditions near perihelion. By considering similarities and differences between results obtained with different numerical approaches under well defined conditions, the consistency and validity of our models can be assessed. The impact on model predictions of physical effects of importance in the SPP mission is also considered by comparing results obtained with and without these effects. Simulation results are presented and compared with increasing levels of complexity in the physics of interaction between solar environmentmore » and the SPP spacecraft. The comparisons focus particularly on spacecraft floating potentials, contributions to the currents collected and emitted by the spacecraft, and on the potential and density spatial profiles near the satellite. The physical effects considered include spacecraft charging, photoelectron and secondary electron emission, and the presence of a background magnetic field. Model predictions obtained with our different computational approaches are found to be in agreement within 2% when the same physical processes are taken into account and treated similarly. The comparisons thus indicate that, with the correct description of important physical effects, our simulation models should have the required skill to predict details of satellite-plasma interaction physics under relevant conditions, with a good level of confidence. Our models concur in predicting a negative floating potential V{sub fl}∼−10V for SPP at perihelion. They also predict a “saturated emission regime” whereby most emitted photo- and secondary electron will be reflected by a potential barrier near the surface, back to the spacecraft where they will be recollected.« less

Warped Linear Prediction of Physical Model Excitations with Applications in Audio Compression and Instrument Synthesis

NASA Astrophysics Data System (ADS)

Glass, Alexis; Fukudome, Kimitoshi

2004-12-01

A sound recording of a plucked string instrument is encoded and resynthesized using two stages of prediction. In the first stage of prediction, a simple physical model of a plucked string is estimated and the instrument excitation is obtained. The second stage of prediction compensates for the simplicity of the model in the first stage by encoding either the instrument excitation or the model error using warped linear prediction. These two methods of compensation are compared with each other, and to the case of single-stage warped linear prediction, adjustments are introduced, and their applications to instrument synthesis and MPEG4's audio compression within the structured audio format are discussed.

Logistic regression models for predicting physical and mental health-related quality of life in rheumatoid arthritis patients.

PubMed

Alishiri, Gholam Hossein; Bayat, Noushin; Fathi Ashtiani, Ali; Tavallaii, Seyed Abbas; Assari, Shervin; Moharamzad, Yashar

2008-01-01

The aim of this work was to develop two logistic regression models capable of predicting physical and mental health related quality of life (HRQOL) among rheumatoid arthritis (RA) patients. In this cross-sectional study which was conducted during 2006 in the outpatient rheumatology clinic of our university hospital, Short Form 36 (SF-36) was used for HRQOL measurements in 411 RA patients. A cutoff point to define poor versus good HRQOL was calculated using the first quartiles of SF-36 physical and mental component scores (33.4 and 36.8, respectively). Two distinct logistic regression models were used to derive predictive variables including demographic, clinical, and psychological factors. The sensitivity, specificity, and accuracy of each model were calculated. Poor physical HRQOL was positively associated with pain score, disease duration, monthly family income below 300 US$, comorbidity, patient global assessment of disease activity or PGA, and depression (odds ratios: 1.1; 1.004; 15.5; 1.1; 1.02; 2.08, respectively). The variables that entered into the poor mental HRQOL prediction model were monthly family income below 300 US$, comorbidity, PGA, and bodily pain (odds ratios: 6.7; 1.1; 1.01; 1.01, respectively). Optimal sensitivity and specificity were achieved at a cutoff point of 0.39 for the estimated probability of poor physical HRQOL and 0.18 for mental HRQOL. Sensitivity, specificity, and accuracy of the physical and mental models were 73.8, 87, 83.7% and 90.38, 70.36, 75.43%, respectively. The results show that the suggested models can be used to predict poor physical and mental HRQOL separately among RA patients using simple variables with acceptable accuracy. These models can be of use in the clinical decision-making of RA patients and to recognize patients with poor physical or mental HRQOL in advance, for better management.

Evaluating Air-Quality Models: Review and Outlook.

NASA Astrophysics Data System (ADS)

Weil, J. C.; Sykes, R. I.; Venkatram, A.

1992-10-01

Over the past decade, much attention has been devoted to the evaluation of air-quality models with emphasis on model performance in predicting the high concentrations that are important in air-quality regulations. This paper stems from our belief that this practice needs to be expanded to 1) evaluate model physics and 2) deal with the large natural or stochastic variability in concentration. The variability is represented by the root-mean- square fluctuating concentration (c about the mean concentration (C) over an ensemble-a given set of meteorological, source, etc. conditions. Most air-quality models used in applications predict C, whereas observations are individual realizations drawn from an ensemble. For cC large residuals exist between predicted and observed concentrations, which confuse model evaluations.This paper addresses ways of evaluating model physics in light of the large c the focus is on elevated point-source models. Evaluation of model physics requires the separation of the mean model error-the difference between the predicted and observed C-from the natural variability. A residual analysis is shown to be an elective way of doing this. Several examples demonstrate the usefulness of residuals as well as correlation analyses and laboratory data in judging model physics.In general, c models and predictions of the probability distribution of the fluctuating concentration (c), (c, are in the developmental stage, with laboratory data playing an important role. Laboratory data from point-source plumes in a convection tank show that (c approximates a self-similar distribution along the plume center plane, a useful result in a residual analysis. At pmsent,there is one model-ARAP-that predicts C, c, and (c for point-source plumes. This model is more computationally demanding than other dispersion models (for C only) and must be demonstrated as a practical tool. However, it predicts an important quantity for applications- the uncertainty in the very high and infrequent concentrations. The uncertainty is large and is needed in evaluating operational performance and in predicting the attainment of air-quality standards.

Active lifestyles in older adults: an integrated predictive model of physical activity and exercise

PubMed Central

Galli, Federica; Chirico, Andrea; Mallia, Luca; Girelli, Laura; De Laurentiis, Michelino; Lucidi, Fabio; Giordano, Antonio; Botti, Gerardo

2018-01-01

Physical activity and exercise have been identified as behaviors to preserve physical and mental health in older adults. The aim of the present study was to test the Integrated Behavior Change model in exercise and physical activity behaviors. The study evaluated two different samples of older adults: the first engaged in exercise class, the second doing spontaneous physical activity. The key analyses relied on Variance-Based Structural Modeling, which were performed by means of WARP PLS 6.0 statistical software. The analyses estimated the Integrated Behavior Change model in predicting exercise and physical activity, in a longitudinal design across two months of assessment. The tested models exhibited a good fit with the observed data derived from the model focusing on exercise, as well as with those derived from the model focusing on physical activity. Results showed, also, some effects and relations specific to each behavioral context. Results may form a starting point for future experimental and intervention research. PMID:29875997

Predicting Risk of Suicide Attempt Using History of Physical Illnesses From Electronic Medical Records

PubMed Central

Luo, Wei; Tran, Truyen; Berk, Michael; Venkatesh, Svetha

2016-01-01

Background Although physical illnesses, routinely documented in electronic medical records (EMR), have been found to be a contributing factor to suicides, no automated systems use this information to predict suicide risk. Objective The aim of this study is to quantify the impact of physical illnesses on suicide risk, and develop a predictive model that captures this relationship using EMR data. Methods We used history of physical illnesses (except chapter V: Mental and behavioral disorders) from EMR data over different time-periods to build a lookup table that contains the probability of suicide risk for each chapter of the International Statistical Classification of Diseases and Related Health Problems, 10th Revision (ICD-10) codes. The lookup table was then used to predict the probability of suicide risk for any new assessment. Based on the different lengths of history of physical illnesses, we developed six different models to predict suicide risk. We tested the performance of developed models to predict 90-day risk using historical data over differing time-periods ranging from 3 to 48 months. A total of 16,858 assessments from 7399 mental health patients with at least one risk assessment was used for the validation of the developed model. The performance was measured using area under the receiver operating characteristic curve (AUC). Results The best predictive results were derived (AUC=0.71) using combined data across all time-periods, which significantly outperformed the clinical baseline derived from routine risk assessment (AUC=0.56). The proposed approach thus shows potential to be incorporated in the broader risk assessment processes used by clinicians. Conclusions This study provides a novel approach to exploit the history of physical illnesses extracted from EMR (ICD-10 codes without chapter V-mental and behavioral disorders) to predict suicide risk, and this model outperforms existing clinical assessments of suicide risk. PMID:27400764

Integrating non-colocated well and geophysical data to capture subsurface heterogeneity at an aquifer recharge and recovery site

NASA Astrophysics Data System (ADS)

Gottschalk, Ian P.; Hermans, Thomas; Knight, Rosemary; Caers, Jef; Cameron, David A.; Regnery, Julia; McCray, John E.

2017-12-01

Geophysical data have proven to be very useful for lithological characterization. However, quantitatively integrating the information gained from acquiring geophysical data generally requires colocated lithological and geophysical data for constructing a rock-physics relationship. In this contribution, the issue of integrating noncolocated geophysical and lithological data is addressed, and the results are applied to simulate groundwater flow in a heterogeneous aquifer in the Prairie Waters Project North Campus aquifer recharge site, Colorado. Two methods of constructing a rock-physics transform between electrical resistivity tomography (ERT) data and lithology measurements are assessed. In the first approach, a maximum likelihood estimation (MLE) is used to fit a bimodal lognormal distribution to horizontal crosssections of the ERT resistivity histogram. In the second approach, a spatial bootstrap is applied to approximate the rock-physics relationship. The rock-physics transforms provide soft data for multiple point statistics (MPS) simulations. Subsurface models are used to run groundwater flow and tracer test simulations. Each model's uncalibrated, predicted breakthrough time is evaluated based on its agreement with measured subsurface travel time values from infiltration basins to selected groundwater recovery wells. We find that incorporating geophysical information into uncalibrated flow models reduces the difference with observed values, as compared to flow models without geophysical information incorporated. The integration of geophysical data also narrows the variance of predicted tracer breakthrough times substantially. Accuracy is highest and variance is lowest in breakthrough predictions generated by the MLE-based rock-physics transform. Calibrating the ensemble of geophysically constrained models would help produce a suite of realistic flow models for predictive purposes at the site. We find that the success of breakthrough predictions is highly sensitive to the definition of the rock-physics transform; it is therefore important to model this transfer function accurately.

Machine Learning and Deep Learning Models to Predict Runoff Water Quantity and Quality

NASA Astrophysics Data System (ADS)

Bradford, S. A.; Liang, J.; Li, W.; Murata, T.; Simunek, J.

2017-12-01

Contaminants can be rapidly transported at the soil surface by runoff to surface water bodies. Physically-based models, which are based on the mathematical description of main hydrological processes, are key tools for predicting surface water impairment. Along with physically-based models, data-driven models are becoming increasingly popular for describing the behavior of hydrological and water resources systems since these models can be used to complement or even replace physically based-models. In this presentation we propose a new data-driven model as an alternative to a physically-based overland flow and transport model. First, we have developed a physically-based numerical model to simulate overland flow and contaminant transport (the HYDRUS-1D overland flow module). A large number of numerical simulations were carried out to develop a database containing information about the impact of various input parameters (weather patterns, surface topography, vegetation, soil conditions, contaminants, and best management practices) on runoff water quantity and quality outputs. This database was used to train data-driven models. Three different methods (Neural Networks, Support Vector Machines, and Recurrence Neural Networks) were explored to prepare input- output functional relations. Results demonstrate the ability and limitations of machine learning and deep learning models to predict runoff water quantity and quality.

Analyzing Log Files to Predict Students' Problem Solving Performance in a Computer-Based Physics Tutor

ERIC Educational Resources Information Center

Lee, Young-Jin

2015-01-01

This study investigates whether information saved in the log files of a computer-based tutor can be used to predict the problem solving performance of students. The log files of a computer-based physics tutoring environment called Andes Physics Tutor was analyzed to build a logistic regression model that predicted success and failure of students'…

Dispositional and Situational Avoidance and Approach as Predictors of Physical Symptom Bother Following Breast Cancer Diagnosis

PubMed Central

Bauer, Margaret R.; Harris, Lauren N.; Wiley, Joshua F.; Crespi, Catherine M.; Krull, Jennifer L.; Weihs, Karen L.; Stanton, Annette L.

2016-01-01

Background Few studies examine whether dispositional approach and avoidance coping and stressor-specific coping strategies differentially predict physical adjustment to cancer-related stress. Purpose This study examines dispositional and situational avoidance and approach coping as unique predictors of the bother women experience from physical symptoms after breast cancer treatment, as well as whether situational coping mediates the prediction of bother from physical symptoms by dispositional coping. Method Breast cancer patients (N=460) diagnosed within the past 3 months completed self-report measures of dispositional coping at study entry and of situational coping and bother from physical symptoms every 6 weeks through 6 months. Results In multilevel structural equation modeling analyses, both dispositional and situational avoidance predict greater symptom bother. Dispositional, but not situational, approach predicts less symptom bother. Supporting mediation models, dispositional avoidance predicts more symptom bother indirectly through greater situational avoidance. Dispositional approach predicts less symptom bother through less situational avoidance. Conclusion Psychosocial interventions to reduce cancer-related avoidance coping are warranted for cancer survivors who are high in dispositional avoidance and/or low in dispositional approach. PMID:26769023

Dispositional and Situational Avoidance and Approach as Predictors of Physical Symptom Bother Following Breast Cancer Diagnosis.

PubMed

Bauer, Margaret R; Harris, Lauren N; Wiley, Joshua F; Crespi, Catherine M; Krull, Jennifer L; Weihs, Karen L; Stanton, Annette L

2016-06-01

Few studies examine whether dispositional approach and avoidance coping and stressor-specific coping strategies differentially predict physical adjustment to cancer-related stress. This study examines dispositional and situational avoidance and approach coping as unique predictors of the bother women experience from physical symptoms after breast cancer treatment, as well as whether situational coping mediates the prediction of bother from physical symptoms by dispositional coping. Breast cancer patients (N = 460) diagnosed within the past 3 months completed self-report measures of dispositional coping at study entry and of situational coping and bother from physical symptoms every 6 weeks through 6 months. In multilevel structural equation modeling analyses, both dispositional and situational avoidance predict greater symptom bother. Dispositional, but not situational, approach predicts less symptom bother. Supporting mediation models, dispositional avoidance predicts more symptom bother indirectly through greater situational avoidance. Dispositional approach predicts less symptom bother through less situational avoidance. Psychosocial interventions to reduce cancer-related avoidance coping are warranted for cancer survivors who are high in dispositional avoidance and/or low in dispositional approach.

Incorporating groundwater flow into the WEPP model

Treesearch

William Elliot; Erin Brooks; Tim Link; Sue Miller

2010-01-01

The water erosion prediction project (WEPP) model is a physically-based hydrology and erosion model. In recent years, the hydrology prediction within the model has been improved for forest watershed modeling by incorporating shallow lateral flow into watershed runoff prediction. This has greatly improved WEPP's hydrologic performance on small watersheds with...

DATA ASSIMILATION APPROACH FOR FORECAST OF SOLAR ACTIVITY CYCLES

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kitiashvili, Irina N., E-mail: irina.n.kitiashvili@nasa.gov

Numerous attempts to predict future solar cycles are mostly based on empirical relations derived from observations of previous cycles, and they yield a wide range of predicted strengths and durations of the cycles. Results obtained with current dynamo models also deviate strongly from each other, thus raising questions about criteria to quantify the reliability of such predictions. The primary difficulties in modeling future solar activity are shortcomings of both the dynamo models and observations that do not allow us to determine the current and past states of the global solar magnetic structure and its dynamics. Data assimilation is a relativelymore » new approach to develop physics-based predictions and estimate their uncertainties in situations where the physical properties of a system are not well-known. This paper presents an application of the ensemble Kalman filter method for modeling and prediction of solar cycles through use of a low-order nonlinear dynamo model that includes the essential physics and can describe general properties of the sunspot cycles. Despite the simplicity of this model, the data assimilation approach provides reasonable estimates for the strengths of future solar cycles. In particular, the prediction of Cycle 24 calculated and published in 2008 is so far holding up quite well. In this paper, I will present my first attempt to predict Cycle 25 using the data assimilation approach, and discuss the uncertainties of that prediction.« less

Evaluation of snow modeling with Noah and Noah-MP land surface models in NCEP GFS/CFS system

NASA Astrophysics Data System (ADS)

Dong, J.; Ek, M. B.; Wei, H.; Meng, J.

2017-12-01

Land surface serves as lower boundary forcing in global forecast system (GFS) and climate forecast system (CFS), simulating interactions between land and the atmosphere. Understanding the underlying land model physics is a key to improving weather and seasonal prediction skills. With the upgrades in land model physics (e.g., release of newer versions of a land model), different land initializations, changes in parameterization schemes used in the land model (e.g., land physical parametrization options), and how the land impact is handled (e.g., physics ensemble approach), it always prompts the necessity that climate prediction experiments need to be re-conducted to examine its impact. The current NASA LIS (version 7) integrates NOAA operational land surface and hydrological models (NCEP's Noah, versions from 2.7.1 to 3.6 and the future Noah-MP), high-resolution satellite and observational data, and land DA tools. The newer versions of the Noah LSM used in operational models have a variety of enhancements compared to older versions, where the Noah-MP allows for different physics parameterization options and the choice could have large impact on physical processes underlying seasonal predictions. These impacts need to be reexamined before implemented into NCEP operational systems. A set of offline numerical experiments driven by the GFS forecast forcing have been conducted to evaluate the impact of snow modeling with daily Global Historical Climatology Network (GHCN).

Probing new physics through Bs*→μ+μ- decay

NASA Astrophysics Data System (ADS)

Kumar, Dinesh; Saini, Jyoti; Gangal, Shireen; Das, Sanjeeda Bharati

2018-02-01

We perform a model independent analysis of new physics in Bs*→μ+μ- decay. We intend to identify new physics operator(s) which can provide large enhancement in the branching ratio of Bs*→μ+μ- above its standard model prediction. For this, we consider new physics in the form of vector, axial-vector, scalar and pseudoscalar operators. We find that scalar and pseudoscalar operators do not contribute to the branching ratio of Bs*→μ+μ- . We perform a global fit to all relevant b →s μ+μ- data for different new physics scenarios. For each of these scenarios, we predict Br (Bs*→μ+μ-) . We find that a significant enhancement in Br (Bs*→μ+μ-) is not allowed by any of these new physics operators. In fact, for all new physics scenarios providing a good fit to the data, the branching ratio of Bs*→μ+μ- is suppressed as compared to the standard model (SM) value. Hence the present b →s μ+μ- data indicates that the future measurement of Br (Bs*→μ+μ-) is expected to be suppressed in comparison to the standard model prediction.

The management submodel of the Wind Erosion Prediction System

USDA-ARS?s Scientific Manuscript database

The Wind Erosion Prediction System (WEPS) is a process-based, daily time-step, computer model that predicts soil erosion via simulation of the physical processes controlling wind erosion. WEPS is comprised of several individual modules (submodels) that reflect different sets of physical processes, ...

Physical activity and parents of very young children: The role of beliefs and social-cognitive factors.

PubMed

Cowie, Eloise; White, Katherine; Hamilton, Kyra

2018-05-14

Despite the unequivocal benefits of regular physical activity, many parents engage in lower levels of physical activity (PA) following the birth of a child. Drawing on the theory of planned behaviour (TPB) and health action process approach (HAPA), an integrative model was developed to examine variables predicting PA in parents of very young children. In addition, key beliefs related to PA intentions and behaviour among parents of very young children were investigated. A prospective-correlational design with two waves of data collection, spaced one week apart, was adopted. Parents (N = 297) completed an online- or paper-based questionnaire assessing TPB global constructs and belief-based items as well as family social support and planning from the HAPA. One week later, parents self-reported their PA behaviour. Data were analysed using latent variable structural equation modelling. Findings revealed the model was a good fit to the data, accounting for 62% and 27% of the variance in PA intentions and behaviour, respectively. Attitude, subjective norm, and perceived behavioural control predicted intentions. Family social support failed to predict both planning and intentions. Physical activity was predicted by planning only, with an indirect effect occurring from intentions to behaviour through planning. A number of key beliefs on intentions and behaviour were also identified. This formative research provides further understanding of the factors that influence the PA behaviour of parents of very young children. Results provide targets for future interventions to increase PA for parents in a transition phase where PA levels decline. Statement of Contribution What is already known on this subject? Despite physical activity benefits, many parents are inactive following the birth of a child Social-cognitive models have demonstrated efficacy in predicting physical activity Weaknesses are inherent in the use of single theories to explain behaviour What does this study add? Use of integrative models allows for meaningful prediction of parental physical activity A range of key beliefs were found to be related to parental physical activity Results can inform future physical activity interventions for parents of very young children. © 2018 The British Psychological Society.

Multivariate statistical assessment of predictors of firefighters' muscular and aerobic work capacity.

PubMed

Lindberg, Ann-Sofie; Oksa, Juha; Antti, Henrik; Malm, Christer

2015-01-01

Physical capacity has previously been deemed important for firefighters physical work capacity, and aerobic fitness, muscular strength, and muscular endurance are the most frequently investigated parameters of importance. Traditionally, bivariate and multivariate linear regression statistics have been used to study relationships between physical capacities and work capacities among firefighters. An alternative way to handle datasets consisting of numerous correlated variables is to use multivariate projection analyses, such as Orthogonal Projection to Latent Structures. The first aim of the present study was to evaluate the prediction and predictive power of field and laboratory tests, respectively, on firefighters' physical work capacity on selected work tasks. Also, to study if valid predictions could be achieved without anthropometric data. The second aim was to externally validate selected models. The third aim was to validate selected models on firefighters' and on civilians'. A total of 38 (26 men and 12 women) + 90 (38 men and 52 women) subjects were included in the models and the external validation, respectively. The best prediction (R2) and predictive power (Q2) of Stairs, Pulling, Demolition, Terrain, and Rescue work capacities included field tests (R2 = 0.73 to 0.84, Q2 = 0.68 to 0.82). The best external validation was for Stairs work capacity (R2 = 0.80) and worst for Demolition work capacity (R2 = 0.40). In conclusion, field and laboratory tests could equally well predict physical work capacities for firefighting work tasks, and models excluding anthropometric data were valid. The predictive power was satisfactory for all included work tasks except Demolition.

Multimethod Prediction of Physical Parent-Child Aggression Risk in Expectant Mothers and Fathers with Social Information Processing Theory

PubMed Central

Rodriguez, Christina M.; Smith, Tamika L.; Silvia, Paul J.

2015-01-01

The Social Information Processing (SIP) model postulates that parents undergo a series of stages in implementing physical discipline that can escalate into physical child abuse. The current study utilized a multimethod approach to investigate whether SIP factors can predict risk of parent-child aggression (PCA) in a diverse sample of expectant mothers and fathers. SIP factors of PCA attitudes, negative child attributions, reactivity, and empathy were considered as potential predictors of PCA risk; additionally, analyses considered whether personal history of PCA predicted participants’ own PCA risk through its influence on their attitudes and attributions. Findings indicate that, for both mothers and fathers, history influenced attitudes but not attributions in predicting PCA risk, and attitudes and attributions predicted PCA risk; empathy and reactivity predicted negative child attributions for expectant mothers, but only reactivity significantly predicted attributions for expectant fathers. Path models for expectant mothers and fathers were remarkably similar. Overall, the findings provide support for major aspects of the SIP model. Continued work is needed in studying the progression of these factors across time for both mothers and fathers as well as the inclusion of other relevant ecological factors to the SIP model. PMID:26631420

Integrating sequence stratigraphy and rock-physics to interpret seismic amplitudes and predict reservoir quality

NASA Astrophysics Data System (ADS)

Dutta, Tanima

This dissertation focuses on the link between seismic amplitudes and reservoir properties. Prediction of reservoir properties, such as sorting, sand/shale ratio, and cement-volume from seismic amplitudes improves by integrating knowledge from multiple disciplines. The key contribution of this dissertation is to improve the prediction of reservoir properties by integrating sequence stratigraphy and rock physics. Sequence stratigraphy has been successfully used for qualitative interpretation of seismic amplitudes to predict reservoir properties. Rock physics modeling allows quantitative interpretation of seismic amplitudes. However, often there is uncertainty about selecting geologically appropriate rock physics model and its input parameters, away from the wells. In the present dissertation, we exploit the predictive power of sequence stratigraphy to extract the spatial trends of sedimentological parameters that control seismic amplitudes. These spatial trends of sedimentological parameters can serve as valuable constraints in rock physics modeling, especially away from the wells. Consequently, rock physics modeling, integrated with the trends from sequence stratigraphy, become useful for interpreting observed seismic amplitudes away from the wells in terms of underlying sedimentological parameters. We illustrate this methodology using a comprehensive dataset from channelized turbidite systems, deposited in minibasin settings in the offshore Equatorial Guinea, West Africa. First, we present a practical recipe for using closed-form expressions of effective medium models to predict seismic velocities in unconsolidated sandstones. We use an effective medium model that combines perfectly rough and smooth grains (the extended Walton model), and use that model to derive coordination number, porosity, and pressure relations for P and S wave velocities from experimental data. Our recipe provides reasonable fits to other experimental and borehole data, and specifically improves the predictions of shear wave velocities. In addition, we provide empirical relations on normal compaction depth trends of porosity, velocities, and VP/VS ratio for shale and clean sands in shallow, supra-salt sediments in the Gulf of Mexico. Next, we identify probable spatial trends of sand/shale ratio and sorting as predicted by the conventional sequence stratigraphic model in minibasin settings (spill-and-fill model). These spatial trends are evaluated using well data from offshore West Africa, and the same well data are used to calibrate rock physics models (modified soft-sand model) that provide links between P-impedance and quartz/clay ratio, and sorting. The spatial increase in sand/shale ratio and sorting corresponds to an overall increase in P-impedance, and AVO intercept and gradient. The results are used as a guide to interpret sedimentological parameters from seismic attributes, away from the well locations. We present a quantitative link between carbonate cement and seismic attributes by combining stratigraphie cycles and the rock physics model (modified differential effective medium model). The variation in carbonate cement volume in West Africa can be linked with two distinct stratigraphic cycles: the coarsening-upward cycles and the fining-upward cycles. Cemented sandstones associated with these cycles exhibit distinct signatures on P-impedance vs. porosity and AVO intercept vs. gradient crossplots. These observations are important for assessing reservoir properties in the West Africa as well as in other analogous depositional environments. Finally, we investigate the relationship between seismic velocities and time temperature index (TTI) using basin and petroleum system modeling at Rio Muni basin, West Africa. We find that both VP and VS increase exponentially with TTI. The results can be applied to predict TTI, and thereby thermal maturity, from observed velocities.

Youth Sport Readiness: A Predictive Model for Success.

ERIC Educational Resources Information Center

Aicinena, Steven

1992-01-01

A model for predicting organized youth sport participation readiness has four predictive components: sport-related fundamental motor skill development; sport-specific knowledge; motivation; and socialization. Physical maturation is also important. The model emphasizes the importance of preparing children for successful participation through…

Change in physical education motivation and physical activity behavior during middle school.

PubMed

Cox, Anne E; Smith, Alan L; Williams, Lavon

2008-11-01

To test a mediational model of the relationships among motivation-related variables in middle-school physical education and leisure-time physical activity behavior. Sixth- and seventh-grade physical education students from five middle schools in the midwest United States completed a survey containing measures of study variables on two occasions, 1 year apart. Motivation-related constructs positively predicted leisure-time physical activity behavior. Enjoyment of activities in physical education and physical activity during class mediated the relationship between self-determined motivation in physical education and leisure-time physical activity. Perceived competence, autonomy, and relatedness were important antecedent variables in the model, with autonomy and relatedness showing less stability over time and positively predicting self-determined motivation. Students' leisure-time physical activity is linked to motivation-related experiences in physical education. Perceptions of competence, autonomy, and relatedness, self-determined motivation, enjoyment, and physical activity in the physical education setting directly or indirectly predict leisure-time physical activity. The associations suggest that more adaptive motivation corresponds to transfer of behavior across contexts. Also, the findings suggest that the efficacy of school-based physical activity interventions, within and outside of school, is linked to the degree of support for students' self-determined motivation.

Prediction of adolescents doing physical activity after completing secondary education.

PubMed

Moreno-Murcia, Juan Antonio; Huéscar, Elisa; Cervelló, Eduardo

2012-03-01

The purpose of this study, based on the self-determination theory (Ryan & Deci, 2000) was to test the prediction power of student's responsibility, psychological mediators, intrinsic motivation and the importance attached to physical education in the intention to continue to practice some form of physical activity and/or sport, and the possible relationships that exist between these variables. We used a sample of 482 adolescent students in physical education classes, with a mean age of 14.3 years, which were measured for responsibility, psychological mediators, sports motivation, the importance of physical education and intention to be physically active. We completed an analysis of structural equations modelling. The results showed that the responsibility positively predicted psychological mediators, and this predicted intrinsic motivation, which positively predicted the importance students attach to physical education, and this, finally, positively predicted the intention of the student to continue doing sport. Results are discussed in relation to the promotion of student's responsibility towards a greater commitment to the practice of physical exercise.

A machine-learning approach for computation of fractional flow reserve from coronary computed tomography.

PubMed

Itu, Lucian; Rapaka, Saikiran; Passerini, Tiziano; Georgescu, Bogdan; Schwemmer, Chris; Schoebinger, Max; Flohr, Thomas; Sharma, Puneet; Comaniciu, Dorin

2016-07-01

Fractional flow reserve (FFR) is a functional index quantifying the severity of coronary artery lesions and is clinically obtained using an invasive, catheter-based measurement. Recently, physics-based models have shown great promise in being able to noninvasively estimate FFR from patient-specific anatomical information, e.g., obtained from computed tomography scans of the heart and the coronary arteries. However, these models have high computational demand, limiting their clinical adoption. In this paper, we present a machine-learning-based model for predicting FFR as an alternative to physics-based approaches. The model is trained on a large database of synthetically generated coronary anatomies, where the target values are computed using the physics-based model. The trained model predicts FFR at each point along the centerline of the coronary tree, and its performance was assessed by comparing the predictions against physics-based computations and against invasively measured FFR for 87 patients and 125 lesions in total. Correlation between machine-learning and physics-based predictions was excellent (0.9994, P < 0.001), and no systematic bias was found in Bland-Altman analysis: mean difference was -0.00081 ± 0.0039. Invasive FFR ≤ 0.80 was found in 38 lesions out of 125 and was predicted by the machine-learning algorithm with a sensitivity of 81.6%, a specificity of 83.9%, and an accuracy of 83.2%. The correlation was 0.729 (P < 0.001). Compared with the physics-based computation, average execution time was reduced by more than 80 times, leading to near real-time assessment of FFR. Average execution time went down from 196.3 ± 78.5 s for the CFD model to ∼2.4 ± 0.44 s for the machine-learning model on a workstation with 3.4-GHz Intel i7 8-core processor. Copyright © 2016 the American Physiological Society.

Predicting the Activity Coefficients of Free-Solvent for Concentrated Globular Protein Solutions Using Independently Determined Physical Parameters

PubMed Central

McBride, Devin W.; Rodgers, Victor G. J.

2013-01-01

The activity coefficient is largely considered an empirical parameter that was traditionally introduced to correct the non-ideality observed in thermodynamic systems such as osmotic pressure. Here, the activity coefficient of free-solvent is related to physically realistic parameters and a mathematical expression is developed to directly predict the activity coefficients of free-solvent, for aqueous protein solutions up to near-saturation concentrations. The model is based on the free-solvent model, which has previously been shown to provide excellent prediction of the osmotic pressure of concentrated and crowded globular proteins in aqueous solutions up to near-saturation concentrations. Thus, this model uses only the independently determined, physically realizable quantities: mole fraction, solvent accessible surface area, and ion binding, in its prediction. Predictions are presented for the activity coefficients of free-solvent for near-saturated protein solutions containing either bovine serum albumin or hemoglobin. As a verification step, the predictability of the model for the activity coefficient of sucrose solutions was evaluated. The predicted activity coefficients of free-solvent are compared to the calculated activity coefficients of free-solvent based on osmotic pressure data. It is observed that the predicted activity coefficients are increasingly dependent on the solute-solvent parameters as the protein concentration increases to near-saturation concentrations. PMID:24324733

Reality-Theoretical Models-Mathematics: A Ternary Perspective on Physics Lessons in Upper-Secondary School

ERIC Educational Resources Information Center

Hansson, Lena; Hansson, Örjan; Juter, Kristina; Redfors, Andreas

2015-01-01

This article discusses the role of mathematics during physics lessons in upper-secondary school. Mathematics is an inherent part of theoretical models in physics and makes powerful predictions of natural phenomena possible. Ability to use both theoretical models and mathematics is central in physics. This paper takes as a starting point that the…

Predicting physical activity and fruit and vegetable intake in adolescents: a test of the information, motivation, behavioral skills model.

PubMed

Kelly, Stephanie; Melnyk, Bernadette Mazurek; Belyea, Michael

2012-04-01

Most adolescents do not meet national recommendations regarding physical activity and/or the intake of fruits and vegetables. The purpose of this study was to explore whether variables in the information, motivation, behavioral skills (IMB) model of health promotion predicted physical activity and fruit and vegetable intake in 404 adolescents from 2 high schools in the Southwest United States using structural equation modeling (SEM). The SEM models included theoretical constructs, contextual variables, and moderators. The theoretical relationships in the IMB model were confirmed and were moderated by gender and race. Interventions that incorporate cognitive-behavioral skills building may be a key factor for promoting physical activity as well as fruit and vegetable intake in adolescents. Copyright © 2012 Wiley Periodicals, Inc.

Soil erosion model predictions using parent material/soil texture-based parameters compared to using site-specific parameters

Treesearch

R. B. Foltz; W. J. Elliot; N. S. Wagenbrenner

2011-01-01

Forested areas disturbed by access roads produce large amounts of sediment. One method to predict erosion and, hence, manage forest roads is the use of physically based soil erosion models. A perceived advantage of a physically based model is that it can be parameterized at one location and applied at another location with similar soil texture or geological parent...

Maternal risk factors predicting child physical characteristics and dysmorphology in fetal alcohol syndrome and partial fetal alcohol syndrome.

PubMed

May, Philip A; Tabachnick, Barbara G; Gossage, J Phillip; Kalberg, Wendy O; Marais, Anna-Susan; Robinson, Luther K; Manning, Melanie; Buckley, David; Hoyme, H Eugene

2011-12-01

Previous research in South Africa revealed very high rates of fetal alcohol syndrome (FAS), of 46-89 per 1000 among young children. Maternal and child data from studies in this community summarize the multiple predictors of FAS and partial fetal alcohol syndrome (PFAS). Sequential regression was employed to examine influences on child physical characteristics and dysmorphology from four categories of maternal traits: physical, demographic, childbearing, and drinking. Then, a structural equation model (SEM) was constructed to predict influences on child physical characteristics. Individual sequential regressions revealed that maternal drinking measures were the most powerful predictors of a child's physical anomalies (R² = .30, p < .001), followed by maternal demographics (R² = .24, p < .001), maternal physical characteristics (R²=.15, p < .001), and childbearing variables (R² = .06, p < .001). The SEM utilized both individual variables and the four composite categories of maternal traits to predict a set of child physical characteristics, including a total dysmorphology score. As predicted, drinking behavior is a relatively strong predictor of child physical characteristics (β = 0.61, p < .001), even when all other maternal risk variables are included; higher levels of drinking predict child physical anomalies. Overall, the SEM model explains 62% of the variance in child physical anomalies. As expected, drinking variables explain the most variance. But this highly controlled estimation of multiple effects also reveals a significant contribution played by maternal demographics and, to a lesser degree, maternal physical and childbearing variables. Copyright © 2011 Elsevier Ireland Ltd. All rights reserved.

A Model of Contextual Motivation in Physical Education: Using Constructs from Self-Determination and Achievement Goal Theories To Predict Physical Activity Intentions.

ERIC Educational Resources Information Center

Standage, Martyn; Duda, Joan L.; Ntoumanis, Nikos

2003-01-01

Examines a study of student motivation in physical education that incorporated constructs from achievement goal and self-determination theories. Self-determined motivation was found to positively predict, whereas amotivation was a negative predictor of leisure-time physical activity intentions. (Contains 86 references and 3 tables.) (GCP)

Broadening the trans-contextual model of motivation: A study with Spanish adolescents.

PubMed

González-Cutre, D; Sicilia, Á; Beas-Jiménez, M; Hagger, M S

2014-08-01

The original trans-contextual model of motivation proposed that autonomy support from teachers develops students' autonomous motivation in physical education (PE), and that autonomous motivation is transferred from PE contexts to physical activity leisure-time contexts, and predicts attitudes, perceived behavioral control and subjective norms, and forming intentions to participate in future physical activity behavior. The purpose of this study was to test an extended trans-contextual model of motivation including autonomy support from peers and parents and basic psychological needs in a Spanish sample. School students (n = 400) aged between 12 and 18 years completed measures of perceived autonomy support from three sources, autonomous motivation and constructs from the theory of planned behavior at three different points in time and in two contexts, PE and leisure-time. A path analysis controlling for past physical activity behavior supported the main postulates of the model. Autonomous motivation in a PE context predicted autonomous motivation in a leisure-time physical activity context, perceived autonomy support from teachers predicted satisfaction of basic psychological needs in PE, and perceived autonomy support from peers and parents predicted need satisfaction in leisure-time. This study provides a cross-cultural replication of the trans-contextual model of motivation and broadens it to encompass basic psychological needs. © 2013 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Testing a model of antecedents and consequences of defensive pessimism and self-handicapping in school physical education.

PubMed

Ntoumanis, Nikos; Taylor, Ian M; Standage, Martyn

2010-12-01

There has been very limited research on the use of self-worth protection strategies in the achievement context of school physical education (PE). Thus the aim of the present study was to examine some antecedents and consequences of defensive pessimism and self-handicapping. The sample comprised 534 British pupils (275 females, 259 males) recruited from two schools who responded to established questionnaires. Results of structural equation modelling analysis indicated that self-handicapping and defensive pessimism were positively predicted by fear of failure and negatively predicted by competence valuation. In addition, defensive pessimism was negatively predicted by physical self-concept. In turn, defensive pessimism negatively predicted enjoyment in PE and intentions to participate in future optional PE programmes. Self-handicapping did not predict enjoyment or intentions. Results from multi-sample structural equation modelling showed the specified model to be largely invariant across males and females. The findings indicate that although both strategies aim to protect one's self-worth, some of their antecedents and consequences in PE may differ.

Model Forecast Skill and Sensitivity to Initial Conditions in the Seasonal Sea Ice Outlook

NASA Technical Reports Server (NTRS)

Blanchard-Wrigglesworth, E.; Cullather, R. I.; Wang, W.; Zhang, J.; Bitz, C. M.

2015-01-01

We explore the skill of predictions of September Arctic sea ice extent from dynamical models participating in the Sea Ice Outlook (SIO). Forecasts submitted in August, at roughly 2 month lead times, are skillful. However, skill is lower in forecasts submitted to SIO, which began in 2008, than in hindcasts (retrospective forecasts) of the last few decades. The multimodel mean SIO predictions offer slightly higher skill than the single-model SIO predictions, but neither beats a damped persistence forecast at longer than 2 month lead times. The models are largely unsuccessful at predicting each other, indicating a large difference in model physics and/or initial conditions. Motivated by this, we perform an initial condition sensitivity experiment with four SIO models, applying a fixed -1 m perturbation to the initial sea ice thickness. The significant range of the response among the models suggests that different model physics make a significant contribution to forecast uncertainty.

Advances in modeling sorption and diffusion of moisture in porous reactive materials.

PubMed

Harley, Stephen J; Glascoe, Elizabeth A; Lewicki, James P; Maxwell, Robert S

2014-06-23

Water-vapor-uptake experiments were performed on a silica-filled poly(dimethylsiloxane) (PDMS) network and modeled by using two different approaches. The data was modeled by using established methods and the model parameters were used to predict moisture uptake in a sample. The predictions are reasonably good, but not outstanding; many of the shortcomings of the modeling are discussed. A high-fidelity modeling approach is derived and used to improve the modeling of moisture uptake and diffusion. Our modeling approach captures the physics and kinetics of diffusion and adsorption/desorption, simultaneously. It predicts uptake better than the established method; more importantly, it is also able to predict outgassing. The material used for these studies is a filled-PDMS network; physical interpretations concerning the sorption and diffusion of moisture in this network are discussed. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Regional Assessment of Storm-triggered Shall Landslide Risks using the SLIDE (SLope-Infiltration-Distributed Equilibrium) Model

NASA Astrophysics Data System (ADS)

Hong, Y.; Kirschbaum, D. B.; Fukuoka, H.

2011-12-01

The key to advancing the predictability of rainfall-triggered landslides is to use physically based slope-stability models that simulate the dynamical response of the subsurface moisture to spatiotemporal variability of rainfall in complex terrains. An early warning system applying such physical models has been developed to predict rainfall-induced shallow landslides over Java Island in Indonesia and Honduras. The prototyped early warning system integrates three major components: (1) a susceptibility mapping or hotspot identification component based on a land surface geospatial database (topographical information, maps of soil properties, and local landslide inventory etc.); (2) a satellite-based precipitation monitoring system (http://trmm.gsfc.nasa.gov) and a precipitation forecasting model (i.e. Weather Research Forecast); and (3) a physically-based, rainfall-induced landslide prediction model SLIDE (SLope-Infiltration-Distributed Equilibrium). The system utilizes the modified physical model to calculate a Factor of Safety (FS) that accounts for the contribution of rainfall infiltration and partial saturation to the shear strength of the soil in topographically complex terrains. The system's prediction performance has been evaluated using a local landslide inventory. In Java Island, Indonesia, evaluation of SLIDE modeling results by local news reports shows that the system successfully predicted landslides in correspondence to the time of occurrence of the real landslide events. Further study of SLIDE is implemented in Honduras where Hurricane Mitch triggered widespread landslides in 1998. Results shows within the approximately 1,200 square kilometers study areas, the values of hit rates reached as high as 78% and 75%, while the error indices were 35% and 49%. Despite positive model performance, the SLIDE model is limited in the early warning system by several assumptions including, using general parameter calibration rather than in situ tests and neglecting geologic information. Advantages and limitations of this model will be discussed with respect to future applications of landslide assessment and prediction over large scales. In conclusion, integration of spatially distributed remote sensing precipitation products and in-situ datasets and physical models in this prototype system enable us to further develop a regional early warning tool in the future for forecasting storm-induced landslides.

Hierarchical multi-scale approach to validation and uncertainty quantification of hyper-spectral image modeling

NASA Astrophysics Data System (ADS)

Engel, Dave W.; Reichardt, Thomas A.; Kulp, Thomas J.; Graff, David L.; Thompson, Sandra E.

2016-05-01

Validating predictive models and quantifying uncertainties inherent in the modeling process is a critical component of the HARD Solids Venture program [1]. Our current research focuses on validating physics-based models predicting the optical properties of solid materials for arbitrary surface morphologies and characterizing the uncertainties in these models. We employ a systematic and hierarchical approach by designing physical experiments and comparing the experimental results with the outputs of computational predictive models. We illustrate this approach through an example comparing a micro-scale forward model to an idealized solid-material system and then propagating the results through a system model to the sensor level. Our efforts should enhance detection reliability of the hyper-spectral imaging technique and the confidence in model utilization and model outputs by users and stakeholders.

Automated Systematic Generation and Exploration of Flat Direction Phenomenology in Free Fermionic Heterotic String Theory

NASA Astrophysics Data System (ADS)

Greenwald, Jared

Any good physical theory must resolve current experimental data as well as offer predictions for potential searches in the future. The Standard Model of particle physics, Grand Unied Theories, Minimal Supersymmetric Models and Supergravity are all attempts to provide such a framework. However, they all lack the ability to predict many of the parameters that each of the theories utilize. String theory may yield a solution to this naturalness (or self-predictiveness) problem as well as offer a unifed theory of gravity. Studies in particle physics phenomenology based on perturbative low energy analysis of various string theories can help determine the candidacy of such models. After a review of principles and problems leading up to our current understanding of the universe, we will discuss some of the best particle physics model building techniques that have been developed using string theory. This will culminate in the introduction of a novel approach to a computational, systematic analysis of the various physical phenomena that arise from these string models. We focus on the necessary assumptions, complexity and open questions that arise while making a fully-automated at direction analysis program.

Predictive Analytical Model for Isolator Shock-Train Location in a Mach 2.2 Direct-Connect Supersonic Combustion Tunnel

NASA Astrophysics Data System (ADS)

Lingren, Joe; Vanstone, Leon; Hashemi, Kelley; Gogineni, Sivaram; Donbar, Jeffrey; Akella, Maruthi; Clemens, Noel

2016-11-01

This study develops an analytical model for predicting the leading shock of a shock-train in the constant area isolator section in a Mach 2.2 direct-connect scramjet simulation tunnel. The effective geometry of the isolator is assumed to be a weakly converging duct owing to boundary-layer growth. For some given pressure rise across the isolator, quasi-1D equations relating to isentropic or normal shock flows can be used to predict the normal shock location in the isolator. The surface pressure distribution through the isolator was measured during experiments and both the actual and predicted locations can be calculated. Three methods of finding the shock-train location are examined, one based on the measured pressure rise, one using a non-physics-based control model, and one using the physics-based analytical model. It is shown that the analytical model performs better than the non-physics-based model in all cases. The analytic model is less accurate than the pressure threshold method but requires significantly less information to compute. In contrast to other methods for predicting shock-train location, this method is relatively accurate and requires as little as a single pressure measurement. This makes this method potentially useful for unstart control applications.

Use of machine learning methods to reduce predictive error of groundwater models.

PubMed

Xu, Tianfang; Valocchi, Albert J; Choi, Jaesik; Amir, Eyal

2014-01-01

Quantitative analyses of groundwater flow and transport typically rely on a physically-based model, which is inherently subject to error. Errors in model structure, parameter and data lead to both random and systematic error even in the output of a calibrated model. We develop complementary data-driven models (DDMs) to reduce the predictive error of physically-based groundwater models. Two machine learning techniques, the instance-based weighting and support vector regression, are used to build the DDMs. This approach is illustrated using two real-world case studies of the Republican River Compact Administration model and the Spokane Valley-Rathdrum Prairie model. The two groundwater models have different hydrogeologic settings, parameterization, and calibration methods. In the first case study, cluster analysis is introduced for data preprocessing to make the DDMs more robust and computationally efficient. The DDMs reduce the root-mean-square error (RMSE) of the temporal, spatial, and spatiotemporal prediction of piezometric head of the groundwater model by 82%, 60%, and 48%, respectively. In the second case study, the DDMs reduce the RMSE of the temporal prediction of piezometric head of the groundwater model by 77%. It is further demonstrated that the effectiveness of the DDMs depends on the existence and extent of the structure in the error of the physically-based model. © 2013, National GroundWater Association.

Predicting cognitive function from clinical measures of physical function and health status in older adults.

PubMed

Bolandzadeh, Niousha; Kording, Konrad; Salowitz, Nicole; Davis, Jennifer C; Hsu, Liang; Chan, Alison; Sharma, Devika; Blohm, Gunnar; Liu-Ambrose, Teresa

2015-01-01

Current research suggests that the neuropathology of dementia-including brain changes leading to memory impairment and cognitive decline-is evident years before the onset of this disease. Older adults with cognitive decline have reduced functional independence and quality of life, and are at greater risk for developing dementia. Therefore, identifying biomarkers that can be easily assessed within the clinical setting and predict cognitive decline is important. Early recognition of cognitive decline could promote timely implementation of preventive strategies. We included 89 community-dwelling adults aged 70 years and older in our study, and collected 32 measures of physical function, health status and cognitive function at baseline. We utilized an L1-L2 regularized regression model (elastic net) to identify which of the 32 baseline measures were strongly predictive of cognitive function after one year. We built three linear regression models: 1) based on baseline cognitive function, 2) based on variables consistently selected in every cross-validation loop, and 3) a full model based on all the 32 variables. Each of these models was carefully tested with nested cross-validation. Our model with the six variables consistently selected in every cross-validation loop had a mean squared prediction error of 7.47. This number was smaller than that of the full model (115.33) and the model with baseline cognitive function (7.98). Our model explained 47% of the variance in cognitive function after one year. We built a parsimonious model based on a selected set of six physical function and health status measures strongly predictive of cognitive function after one year. In addition to reducing the complexity of the model without changing the model significantly, our model with the top variables improved the mean prediction error and R-squared. These six physical function and health status measures can be easily implemented in a clinical setting.

Are atmospheric updrafts a key to unlocking climate forcing and sensitivity?

DOE PAGES

Donner, Leo J.; O'Brien, Travis A.; Rieger, Daniel; ...

2016-10-20

Both climate forcing and climate sensitivity persist as stubborn uncertainties limiting the extent to which climate models can provide actionable scientific scenarios for climate change. A key, explicit control on cloud–aerosol interactions, the largest uncertainty in climate forcing, is the vertical velocity of cloud-scale updrafts. Model-based studies of climate sensitivity indicate that convective entrainment, which is closely related to updraft speeds, is an important control on climate sensitivity. Updraft vertical velocities also drive many physical processes essential to numerical weather prediction. Vertical velocities and their role in atmospheric physical processes have been given very limited attention in models for climatemore » and numerical weather prediction. The relevant physical scales range down to tens of meters and are thus frequently sub-grid and require parameterization. Many state-of-science convection parameterizations provide mass fluxes without specifying Vertical velocities and their role in atmospheric physical processes have been given very limited attention in models for climate and numerical weather prediction. The relevant physical scales range down to tens of meters and are thus frequently sub-grid and require parameterization. Many state-of-science convection parameterizations provide mass fluxes without specifying vs in climate models may capture this behavior, but it has not been accounted for when parameterizing cloud and precipitation processes in current models. New observations of convective vertical velocities offer a potentially promising path toward developing process-level cloud models and parameterizations for climate and numerical weather prediction. Taking account of the scale dependence of resolved vertical velocities offers a path to matching cloud-scale physical processes and their driving dynamics more realistically, with a prospect of reduced uncertainty in both climate forcing and sensitivity.« less

Are atmospheric updrafts a key to unlocking climate forcing and sensitivity?

DOE Office of Scientific and Technical Information (OSTI.GOV)

Donner, Leo J.; O'Brien, Travis A.; Rieger, Daniel

Both climate forcing and climate sensitivity persist as stubborn uncertainties limiting the extent to which climate models can provide actionable scientific scenarios for climate change. A key, explicit control on cloud–aerosol interactions, the largest uncertainty in climate forcing, is the vertical velocity of cloud-scale updrafts. Model-based studies of climate sensitivity indicate that convective entrainment, which is closely related to updraft speeds, is an important control on climate sensitivity. Updraft vertical velocities also drive many physical processes essential to numerical weather prediction. Vertical velocities and their role in atmospheric physical processes have been given very limited attention in models for climatemore » and numerical weather prediction. The relevant physical scales range down to tens of meters and are thus frequently sub-grid and require parameterization. Many state-of-science convection parameterizations provide mass fluxes without specifying Vertical velocities and their role in atmospheric physical processes have been given very limited attention in models for climate and numerical weather prediction. The relevant physical scales range down to tens of meters and are thus frequently sub-grid and require parameterization. Many state-of-science convection parameterizations provide mass fluxes without specifying vs in climate models may capture this behavior, but it has not been accounted for when parameterizing cloud and precipitation processes in current models. New observations of convective vertical velocities offer a potentially promising path toward developing process-level cloud models and parameterizations for climate and numerical weather prediction. Taking account of the scale dependence of resolved vertical velocities offers a path to matching cloud-scale physical processes and their driving dynamics more realistically, with a prospect of reduced uncertainty in both climate forcing and sensitivity.« less

Prediction of early summer rainfall over South China by a physical-empirical model

NASA Astrophysics Data System (ADS)

Yim, So-Young; Wang, Bin; Xing, Wen

2014-10-01

In early summer (May-June, MJ) the strongest rainfall belt of the northern hemisphere occurs over the East Asian (EA) subtropical front. During this period the South China (SC) rainfall reaches its annual peak and represents the maximum rainfall variability over EA. Hence we establish an SC rainfall index, which is the MJ mean precipitation averaged over 72 stations over SC (south of 28°N and east of 110°E) and represents superbly the leading empirical orthogonal function mode of MJ precipitation variability over EA. In order to predict SC rainfall, we established a physical-empirical model. Analysis of 34-year observations (1979-2012) reveals three physically consequential predictors. A plentiful SC rainfall is preceded in the previous winter by (a) a dipole sea surface temperature (SST) tendency in the Indo-Pacific warm pool, (b) a tripolar SST tendency in North Atlantic Ocean, and (c) a warming tendency in northern Asia. These precursors foreshadow enhanced Philippine Sea subtropical High and Okhotsk High in early summer, which are controlling factors for enhanced subtropical frontal rainfall. The physical empirical model built on these predictors achieves a cross-validated forecast correlation skill of 0.75 for 1979-2012. Surprisingly, this skill is substantially higher than four-dynamical models' ensemble prediction for 1979-2010 period (0.15). The results here suggest that the low prediction skill of current dynamical models is largely due to models' deficiency and the dynamical prediction has large room to improve.

Contribution of Submarine Groundwater on the Water-Food Nexus in Coastal Ecosystems: Effects on Biodiversity and Fishery Production

NASA Astrophysics Data System (ADS)

Shoji, J.; Sugimoto, R.; Honda, H.; Tominaga, O.; Taniguchi, M.

2014-12-01

In the past decade, machine-learning methods for empirical rainfall-runoff modeling have seen extensive development. However, the majority of research has focused on a small number of methods, such as artificial neural networks, while not considering other approaches for non-parametric regression that have been developed in recent years. These methods may be able to achieve comparable predictive accuracy to ANN's and more easily provide physical insights into the system of interest through evaluation of covariate influence. Additionally, these methods could provide a straightforward, computationally efficient way of evaluating climate change impacts in basins where data to support physical hydrologic models is limited. In this paper, we use multiple regression and machine-learning approaches to predict monthly streamflow in five highly-seasonal rivers in the highlands of Ethiopia. We find that generalized additive models, random forests, and cubist models achieve better predictive accuracy than ANNs in many basins assessed and are also able to outperform physical models developed for the same region. We discuss some challenges that could hinder the use of such models for climate impact assessment, such as biases resulting from model formulation and prediction under extreme climate conditions, and suggest methods for preventing and addressing these challenges. Finally, we demonstrate how predictor variable influence can be assessed to provide insights into the physical functioning of data-sparse watersheds.

Multimethod prediction of physical parent-child aggression risk in expectant mothers and fathers with Social Information Processing theory.

PubMed

Rodriguez, Christina M; Smith, Tamika L; Silvia, Paul J

2016-01-01

The Social Information Processing (SIP) model postulates that parents undergo a series of stages in implementing physical discipline that can escalate into physical child abuse. The current study utilized a multimethod approach to investigate whether SIP factors can predict risk of parent-child aggression (PCA) in a diverse sample of expectant mothers and fathers. SIP factors of PCA attitudes, negative child attributions, reactivity, and empathy were considered as potential predictors of PCA risk; additionally, analyses considered whether personal history of PCA predicted participants' own PCA risk through its influence on their attitudes and attributions. Findings indicate that, for both mothers and fathers, history influenced attitudes but not attributions in predicting PCA risk, and attitudes and attributions predicted PCA risk; empathy and reactivity predicted negative child attributions for expectant mothers, but only reactivity significantly predicted attributions for expectant fathers. Path models for expectant mothers and fathers were remarkably similar. Overall, the findings provide support for major aspects of the SIP model. Continued work is needed in studying the progression of these factors across time for both mothers and fathers as well as the inclusion of other relevant ecological factors to the SIP model. Copyright © 2015 Elsevier Ltd. All rights reserved.

ECOHAB - HYDROGRAPHY AND BIOLOGY TO PROVIDE INFORMATION FOR THE CONSTRUCTION OF A MODEL TO PREDICT THE INITIATION, MAINTANENCE AND DISPERSAL OF RED TIDE ON THE WEST COAST OF FLORIDA

EPA Science Inventory

This program is part of a larger program called ECOHAB: Florida that includes this study as well as physical oceanography, circulation patterns, and shelf scale modeling for predicting the occurrence and transport of Karenia brevis (=Gymnodinium breve) red tides. The physical par...

A Toolkit to Study Sensitivity of the Geant4 Predictions to the Variations of the Physics Model Parameters

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fields, Laura; Genser, Krzysztof; Hatcher, Robert

Geant4 is the leading detector simulation toolkit used in high energy physics to design detectors and to optimize calibration and reconstruction software. It employs a set of carefully validated physics models to simulate interactions of particles with matter across a wide range of interaction energies. These models, especially the hadronic ones, rely largely on directly measured cross-sections and phenomenological predictions with physically motivated parameters estimated by theoretical calculation or measurement. Because these models are tuned to cover a very wide range of possible simulation tasks, they may not always be optimized for a given process or a given material. Thismore » raises several critical questions, e.g. how sensitive Geant4 predictions are to the variations of the model parameters, or what uncertainties are associated with a particular tune of a Geant4 physics model, or a group of models, or how to consistently derive guidance for Geant4 model development and improvement from a wide range of available experimental data. We have designed and implemented a comprehensive, modular, user-friendly software toolkit to study and address such questions. It allows one to easily modify parameters of one or several Geant4 physics models involved in the simulation, and to perform collective analysis of multiple variants of the resulting physics observables of interest and comparison against a variety of corresponding experimental data. Based on modern event-processing infrastructure software, the toolkit offers a variety of attractive features, e.g. flexible run-time configurable workflow, comprehensive bookkeeping, easy to expand collection of analytical components. Design, implementation technology, and key functionalities of the toolkit are presented and illustrated with results obtained with Geant4 key hadronic models.« less

Estimation of the viscosities of liquid binary alloys

NASA Astrophysics Data System (ADS)

Wu, Min; Su, Xiang-Yu

2018-01-01

As one of the most important physical and chemical properties, viscosity plays a critical role in physics and materials as a key parameter to quantitatively understanding the fluid transport process and reaction kinetics in metallurgical process design. Experimental and theoretical studies on liquid metals are problematic. Today, there are many empirical and semi-empirical models available with which to evaluate the viscosity of liquid metals and alloys. However, the parameter of mixed energy in these models is not easily determined, and most predictive models have been poorly applied. In the present study, a new thermodynamic parameter Δ G is proposed to predict liquid alloy viscosity. The prediction equation depends on basic physical and thermodynamic parameters, namely density, melting temperature, absolute atomic mass, electro-negativity, electron density, molar volume, Pauling radius, and mixing enthalpy. Our results show that the liquid alloy viscosity predicted using the proposed model is closely in line with the experimental values. In addition, if the component radius difference is greater than 0.03 nm at a certain temperature, the atomic size factor has a significant effect on the interaction of the binary liquid metal atoms. The proposed thermodynamic parameter Δ G also facilitates the study of other physical properties of liquid metals.

Interpersonal Emotional Behaviors and Physical Health: A 20-Year Longitudinal Study of Long-Term Married Couples

PubMed Central

Haase, Claudia M.; Holley, Sarah; Bloch, Lian; Verstaen, Alice; Levenson, Robert W.

2016-01-01

Objectively coded interpersonal emotional behaviors that emerged during a 15-minute marital conflict interaction predicted the development of physical symptoms in a 20-year longitudinal study of long-term marriages. Dyadic latent growth curve modeling showed that anger behavior predicted increases in cardiovascular symptoms and stonewalling behavior predicted increases in musculoskeletal symptoms. Both associations were found for husbands (although cross-lagged path models also showed some support for wives) and were controlled for sociodemographic characteristics (age, education) and behaviors (i.e., exercise, smoking, alcohol consumption, caffeine consumption) known to influence health. Both associations did not exist at the start of the study, but only emerged over the ensuing 20 years. There was some support for the specificity of these relationships (i.e., stonewalling behavior did not predict cardiovascular symptoms; anger behavior did not predict musculoskeletal symptoms; neither symptom was predicted by fear nor sadness behavior), with the anger-cardiovascular relationship emerging as most robust. Using cross-lagged path models to probe directionality of these associations, emotional behaviors predicted physical health symptoms over time (with some reverse associations found as well). These findings illuminate longstanding theoretical and applied issues concerning the association between interpersonal emotional behaviors and physical health and suggest opportunities for preventive interventions focused on specific emotions to help address major public health problems. PMID:27213730

Rethinking Indian monsoon rainfall prediction in the context of recent global warming

NASA Astrophysics Data System (ADS)

Wang, Bin; Xiang, Baoqiang; Li, Juan; Webster, Peter J.; Rajeevan, Madhavan N.; Liu, Jian; Ha, Kyung-Ja

2015-05-01

Prediction of Indian summer monsoon rainfall (ISMR) is at the heart of tropical climate prediction. Despite enormous progress having been made in predicting ISMR since 1886, the operational forecasts during recent decades (1989-2012) have little skill. Here we show, with both dynamical and physical-empirical models, that this recent failure is largely due to the models' inability to capture new predictability sources emerging during recent global warming, that is, the development of the central-Pacific El Nino-Southern Oscillation (CP-ENSO), the rapid deepening of the Asian Low and the strengthening of North and South Pacific Highs during boreal spring. A physical-empirical model that captures these new predictors can produce an independent forecast skill of 0.51 for 1989-2012 and a 92-year retrospective forecast skill of 0.64 for 1921-2012. The recent low skills of the dynamical models are attributed to deficiencies in capturing the developing CP-ENSO and anomalous Asian Low. The results reveal a considerable gap between ISMR prediction skill and predictability.

Prediction of Meiyu rainfall in Taiwan by multi-lead physical-empirical models

NASA Astrophysics Data System (ADS)

Yim, So-Young; Wang, Bin; Xing, Wen; Lu, Mong-Ming

2015-06-01

Taiwan is located at the dividing point of the tropical and subtropical monsoons over East Asia. Taiwan has double rainy seasons, the Meiyu in May-June and the Typhoon rains in August-September. To predict the amount of Meiyu rainfall is of profound importance to disaster preparedness and water resource management. The seasonal forecast of May-June Meiyu rainfall has been a challenge to current dynamical models and the factors controlling Taiwan Meiyu variability has eluded climate scientists for decades. Here we investigate the physical processes that are possibly important for leading to significant fluctuation of the Taiwan Meiyu rainfall. Based on this understanding, we develop a physical-empirical model to predict Taiwan Meiyu rainfall at a lead time of 0- (end of April), 1-, and 2-month, respectively. Three physically consequential and complementary predictors are used: (1) a contrasting sea surface temperature (SST) tendency in the Indo-Pacific warm pool, (2) the tripolar SST tendency in North Atlantic that is associated with North Atlantic Oscillation, and (3) a surface warming tendency in northeast Asia. These precursors foreshadow an enhanced Philippine Sea anticyclonic anomalies and the anomalous cyclone near the southeastern China in the ensuing summer, which together favor increasing Taiwan Meiyu rainfall. Note that the identified precursors at various lead-times represent essentially the same physical processes, suggesting the robustness of the predictors. The physical empirical model made by these predictors is capable of capturing the Taiwan rainfall variability with a significant cross-validated temporal correlation coefficient skill of 0.75, 0.64, and 0.61 for 1979-2012 at the 0-, 1-, and 2-month lead time, respectively. The physical-empirical model concept used here can be extended to summer monsoon rainfall prediction over the Southeast Asia and other regions.

Establishment of a Physical Model for Solute Diffusion in Hydrogel: Understanding the Diffusion of Proteins in Poly(sulfobetaine methacrylate) Hydrogel.

PubMed

Zhou, Yuhang; Li, Junjie; Zhang, Ying; Dong, Dianyu; Zhang, Ershuai; Ji, Feng; Qin, Zhihui; Yang, Jun; Yao, Fanglian

2017-02-02

Prediction of the diffusion coefficient of solute, especially bioactive molecules, in hydrogel is significant in the biomedical field. Considering the randomness of solute movement in a hydrogel network, a physical diffusion RMP-1 model based on obstruction theory was established in this study. The physical properties of the solute and the polymer chain and their interactions were introduced into this model. Furthermore, models RMP-2 and RMP-3 were established to understand and predict the diffusion behaviors of proteins in hydrogel. In addition, zwitterionic poly(sulfobetaine methacrylate) (PSBMA) hydrogels with wide range and fine adjustable mesh sizes were prepared and used as efficient experimental platforms for model validation. The Flory characteristic ratios, Flory-Huggins parameter, mesh size, and polymer chain radii of PSBMA hydrogels were determined. The diffusion coefficients of the proteins (bovine serum albumin, immunoglobulin G, and lysozyme) in PSBMA hydrogels were studied by the fluorescence recovery after photobleaching technique. The measured diffusion coefficients were compared with the predictions of obstruction models, and it was found that our model presented an excellent predictive ability. Furthermore, the assessment of our model revealed that protein diffusion in PSBMA hydrogel would be affected by the physical properties of the protein and the PSBMA network. It was also confirmed that the diffusion behaviors of protein in zwitterionic hydrogels can be adjusted by changing the cross-linking density of the hydrogel and the ionic strength of the swelling medium. Our model is expected to possess accurate predictive ability for the diffusion coefficient of solute in hydrogel, which will be widely used in the biomedical field.

Stochastic simulation of predictive space–time scenarios of wind speed using observations and physical model outputs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bessac, Julie; Constantinescu, Emil; Anitescu, Mihai

We propose a statistical space-time model for predicting atmospheric wind speed based on deterministic numerical weather predictions and historical measurements. We consider a Gaussian multivariate space-time framework that combines multiple sources of past physical model outputs and measurements in order to produce a probabilistic wind speed forecast within the prediction window. We illustrate this strategy on wind speed forecasts during several months in 2012 for a region near the Great Lakes in the United States. The results show that the prediction is improved in the mean-squared sense relative to the numerical forecasts as well as in probabilistic scores. Moreover, themore » samples are shown to produce realistic wind scenarios based on sample spectra and space-time correlation structure.« less

Stochastic simulation of predictive space–time scenarios of wind speed using observations and physical model outputs

DOE PAGES

Bessac, Julie; Constantinescu, Emil; Anitescu, Mihai

2018-03-01

We propose a statistical space-time model for predicting atmospheric wind speed based on deterministic numerical weather predictions and historical measurements. We consider a Gaussian multivariate space-time framework that combines multiple sources of past physical model outputs and measurements in order to produce a probabilistic wind speed forecast within the prediction window. We illustrate this strategy on wind speed forecasts during several months in 2012 for a region near the Great Lakes in the United States. The results show that the prediction is improved in the mean-squared sense relative to the numerical forecasts as well as in probabilistic scores. Moreover, themore » samples are shown to produce realistic wind scenarios based on sample spectra and space-time correlation structure.« less

Fire spread in chaparral – a comparison of laboratory data and model predictions in burning live fuels

Treesearch

David R. Weise; Eunmo Koo; Xiangyang Zhou; Shankar Mahalingam; Frédéric Morandini; Jacques-Henri Balbi

2016-01-01

Fire behaviour data from 240 laboratory fires in high-density live chaparral fuel beds were compared with model predictions. Logistic regression was used to develop a model to predict fire spread success in the fuel beds and linear regression was used to predict rate of spread. Predictions from the Rothermel equation and three proposed changes as well as two physically...

Hierarchical Multi-Scale Approach To Validation and Uncertainty Quantification of Hyper-Spectral Image Modeling

DOE Office of Scientific and Technical Information (OSTI.GOV)

Engel, David W.; Reichardt, Thomas A.; Kulp, Thomas J.

Validating predictive models and quantifying uncertainties inherent in the modeling process is a critical component of the HARD Solids Venture program [1]. Our current research focuses on validating physics-based models predicting the optical properties of solid materials for arbitrary surface morphologies and characterizing the uncertainties in these models. We employ a systematic and hierarchical approach by designing physical experiments and comparing the experimental results with the outputs of computational predictive models. We illustrate this approach through an example comparing a micro-scale forward model to an idealized solid-material system and then propagating the results through a system model to the sensormore » level. Our efforts should enhance detection reliability of the hyper-spectral imaging technique and the confidence in model utilization and model outputs by users and stakeholders.« less

Self-consistent core-pedestal transport simulations with neural network accelerated models

DOE PAGES

Meneghini, Orso; Smith, Sterling P.; Snyder, Philip B.; ...

2017-07-12

Fusion whole device modeling simulations require comprehensive models that are simultaneously physically accurate, fast, robust, and predictive. In this paper we describe the development of two neural-network (NN) based models as a means to perform a snon-linear multivariate regression of theory-based models for the core turbulent transport fluxes, and the pedestal structure. Specifically, we find that a NN-based approach can be used to consistently reproduce the results of the TGLF and EPED1 theory-based models over a broad range of plasma regimes, and with a computational speedup of several orders of magnitudes. These models are then integrated into a predictive workflowmore » that allows prediction with self-consistent core-pedestal coupling of the kinetic profiles within the last closed flux surface of the plasma. Finally, the NN paradigm is capable of breaking the speed-accuracy trade-off that is expected of traditional numerical physics models, and can provide the missing link towards self-consistent coupled core-pedestal whole device modeling simulations that are physically accurate and yet take only seconds to run.« less

Self-consistent core-pedestal transport simulations with neural network accelerated models

DOE Office of Scientific and Technical Information (OSTI.GOV)

Meneghini, Orso; Smith, Sterling P.; Snyder, Philip B.

Fusion whole device modeling simulations require comprehensive models that are simultaneously physically accurate, fast, robust, and predictive. In this paper we describe the development of two neural-network (NN) based models as a means to perform a snon-linear multivariate regression of theory-based models for the core turbulent transport fluxes, and the pedestal structure. Specifically, we find that a NN-based approach can be used to consistently reproduce the results of the TGLF and EPED1 theory-based models over a broad range of plasma regimes, and with a computational speedup of several orders of magnitudes. These models are then integrated into a predictive workflowmore » that allows prediction with self-consistent core-pedestal coupling of the kinetic profiles within the last closed flux surface of the plasma. Finally, the NN paradigm is capable of breaking the speed-accuracy trade-off that is expected of traditional numerical physics models, and can provide the missing link towards self-consistent coupled core-pedestal whole device modeling simulations that are physically accurate and yet take only seconds to run.« less

Self-consistent core-pedestal transport simulations with neural network accelerated models

NASA Astrophysics Data System (ADS)

Meneghini, O.; Smith, S. P.; Snyder, P. B.; Staebler, G. M.; Candy, J.; Belli, E.; Lao, L.; Kostuk, M.; Luce, T.; Luda, T.; Park, J. M.; Poli, F.

2017-08-01

Fusion whole device modeling simulations require comprehensive models that are simultaneously physically accurate, fast, robust, and predictive. In this paper we describe the development of two neural-network (NN) based models as a means to perform a snon-linear multivariate regression of theory-based models for the core turbulent transport fluxes, and the pedestal structure. Specifically, we find that a NN-based approach can be used to consistently reproduce the results of the TGLF and EPED1 theory-based models over a broad range of plasma regimes, and with a computational speedup of several orders of magnitudes. These models are then integrated into a predictive workflow that allows prediction with self-consistent core-pedestal coupling of the kinetic profiles within the last closed flux surface of the plasma. The NN paradigm is capable of breaking the speed-accuracy trade-off that is expected of traditional numerical physics models, and can provide the missing link towards self-consistent coupled core-pedestal whole device modeling simulations that are physically accurate and yet take only seconds to run.

Standard Model and New physics for ɛ'k/ɛk

NASA Astrophysics Data System (ADS)

Kitahara, Teppei

2018-05-01

The first result of the lattice simulation and improved perturbative calculations have pointed to a discrepancy between data on ɛ'k/ɛk and the standard-model (SM) prediction. Several new physics (NP) models can explain this discrepancy, and such NP models are likely to predict deviations of ℬ(K → πvv) from the SM predictions, which can be probed precisely in the near future by NA62 and KOTO experiments. We present correlations between ɛ'k/ɛk and ℬ(K → πvv) in two types of NP scenarios: a box dominated scenario and a Z-penguin dominated one. It is shown that different correlations are predicted and the future precision measurements of K → πvv can distinguish both scenarios.

The Universe Adventure - The Plank Epoch

Science.gov Websites

Physics In the time before the first 10-44 seconds of the Universe, or the Planck Epoch, the laws of physics as we know them break down; the predictions of General Relativity become meaningless as distance physics models predict that during this epoch the four fundamental forces were combined into one unified

Hunting Solomonoff's Swans: Exploring the Boundary Between Physics and Statistics in Hydrological Modeling

NASA Astrophysics Data System (ADS)

Nearing, G. S.

2014-12-01

Statistical models consistently out-perform conceptual models in the short term, however to account for a nonstationary future (or an unobserved past) scientists prefer to base predictions on unchanging and commutable properties of the universe - i.e., physics. The problem with physically-based hydrology models is, of course, that they aren't really based on physics - they are based on statistical approximations of physical interactions, and we almost uniformly lack an understanding of the entropy associated with these approximations. Thermodynamics is successful precisely because entropy statistics are computable for homogeneous (well-mixed) systems, and ergodic arguments explain the success of Newton's laws to describe systems that are fundamentally quantum in nature. Unfortunately, similar arguments do not hold for systems like watersheds that are heterogeneous at a wide range of scales. Ray Solomonoff formalized the situation in 1968 by showing that given infinite evidence, simultaneously minimizing model complexity and entropy in predictions always leads to the best possible model. The open question in hydrology is about what happens when we don't have infinite evidence - for example, when the future will not look like the past, or when one watershed does not behave like another. How do we isolate stationary and commutable components of watershed behavior? I propose that one possible answer to this dilemma lies in a formal combination of physics and statistics. In this talk I outline my recent analogue (Solomonoff's theorem was digital) of Solomonoff's idea that allows us to quantify the complexity/entropy tradeoff in a way that is intuitive to physical scientists. I show how to formally combine "physical" and statistical methods for model development in a way that allows us to derive the theoretically best possible model given any given physics approximation(s) and available observations. Finally, I apply an analogue of Solomonoff's theorem to evaluate the tradeoff between model complexity and prediction power.

Improving Computational Efficiency of Prediction in Model-Based Prognostics Using the Unscented Transform

NASA Technical Reports Server (NTRS)

Daigle, Matthew John; Goebel, Kai Frank

2010-01-01

Model-based prognostics captures system knowledge in the form of physics-based models of components, and how they fail, in order to obtain accurate predictions of end of life (EOL). EOL is predicted based on the estimated current state distribution of a component and expected profiles of future usage. In general, this requires simulations of the component using the underlying models. In this paper, we develop a simulation-based prediction methodology that achieves computational efficiency by performing only the minimal number of simulations needed in order to accurately approximate the mean and variance of the complete EOL distribution. This is performed through the use of the unscented transform, which predicts the means and covariances of a distribution passed through a nonlinear transformation. In this case, the EOL simulation acts as that nonlinear transformation. In this paper, we review the unscented transform, and describe how this concept is applied to efficient EOL prediction. As a case study, we develop a physics-based model of a solenoid valve, and perform simulation experiments to demonstrate improved computational efficiency without sacrificing prediction accuracy.

Mineral resource models and the Alaskan Mineral Resource Assessment Program

USGS Publications Warehouse

Singer, Donald A.; Vogely, W. A.

1975-01-01

The least exacting demand that can be made of any model is that it serves as a device whereby we can predict actual physical happenings. Another demand which could be made is that the physical happenings predicted be in some way relevant to man, either by allowing him to anticipate future uncontrollable events or by demonstrating the possible consequences of various decisions. To date, many mineral resource models have been deficient in meeting these demands.

The Role of Teachers' Support in Predicting Students' Motivation and Achievement Outcomes in Physical Education

ERIC Educational Resources Information Center

Zhang, Tao; Solmon, Melinda A.; Gu, Xiangli

2012-01-01

Examining how teachers' beliefs and behaviors predict students' motivation and achievement outcomes in physical education is an area of increasing research interest. Guided by the expectancy-value model and self-determination theory, the major purpose of this study was to examine the predictive strength of teachers' autonomy, competence, and…

Sakurai Prize: The Future of Higgs Physics

NASA Astrophysics Data System (ADS)

Dawson, Sally

2017-01-01

The discovery of the Higgs boson relied critically on precision calculations. The quantum contributions from the Higgs boson to the W and top quark masses suggested long before the Higgs discovery that a Standard Model Higgs boson should have a mass in the 100-200 GeV range. The experimental extraction of Higgs properties requires normalization to the predicted Higgs production and decay rates, for which higher order corrections are also essential. As Higgs physics becomes a mature subject, more and more precise calculations will be required. If there is new physics at high scales, it will contribute to the predictions and precision Higgs physics will be a window to beyond the Standard Model physics.

Tampa Bay Water Clarity Model (TBWCM): As a Predictive Tool

EPA Science Inventory

The Tampa Bay Water Clarity Model was developed as a predictive tool for estimating the impact of changing nutrient loads on water clarity as measured by secchi depth. The model combines a physical mixing model with an irradiance model and nutrient cycling model. A 10 segment bi...

Psychological factors related to physical education classes as predictors of students' intention to partake in leisure-time physical activity.

PubMed

Baena-Extremera, Antonio; Granero-Gallegos, Antonio; Ponce-de-León-Elizondo, Ana; Sanz-Arazuri, Eva; Valdemoros-San-Emeterio, María de Los Ángeles; Martínez-Molina, Marina

2016-04-01

In view of the rise in sedentary lifestyle amongst young people, knowledge regarding their intention to partake in physical activity can be decisive when it comes to instilling physical activity habits to improve the current and future health of school students. Therefore, the object of this study was to find a predictive model of the intention to partake in leisure- time physical activity based on motivation, satisfaction and competence. The sample consisted of 347 Spanish, male, high school students and 411 female students aged between 13 and 18 years old. We used a questionnaire made up of the Sport Motivation Scale, Sport Satisfaction Instrument, and the competence factor in the Basic Psychological Needs in Exercise Scale and Intention to Partake in Leisure-Time Physical Activity, all of them adapted to school Physical Education. We carried out confirmatory factor analyses and structural equation models. The intention to partake in leisure-time physical activity was predicted by competence and the latter by satisfaction/fun. Intrinsic motivation was revealed to be the best predictor of satisfaction/fun. Intrinsic motivation should be enhanced in order to predict an intention to partake in physical activity in Physical Education students.

Autonomous Motivation Predicts 7-Day Physical Activity in Hong Kong Students.

PubMed

Ha, Amy S; Ng, Johan Y Y

2015-07-01

Autonomous motivation predicts positive health behaviors such as physical activity. However, few studies have examined the relation between motivational regulations and objectively measured physical activity and sedentary behaviors. Thus, we investigated whether different motivational regulations (autonomous motivation, controlled motivation, and amotivation) predicted 7-day physical activity, sedentary behaviors, and health-related quality of life (HRQoL) of students. A total of 115 students (mean age = 11.6 years, 55.7% female) self-reported their motivational regulations and health-related quality of life. Physical activity and sedentary behaviors were measured using accelerometers for seven days. Using multilevel modeling, we found that autonomous motivation predicted higher levels of moderate-to-vigorous physical activity, less sedentary behaviors, and better HRQoL. Controlled motivation and amotivation each only negatively predicted one facet of HRQoL. Results suggested that autonomous motivation could be an important predictor of physical activity behaviors in Hong Kong students. Promotion of this form of motivational regulation may also increase HRQoL. © 2015 The International Association of Applied Psychology.

A Bayesian approach for parameter estimation and prediction using a computationally intensive model

DOE PAGES

Higdon, Dave; McDonnell, Jordan D.; Schunck, Nicolas; ...

2015-02-05

Bayesian methods have been successful in quantifying uncertainty in physics-based problems in parameter estimation and prediction. In these cases, physical measurements y are modeled as the best fit of a physics-based modelmore » $$\\eta (\\theta )$$, where θ denotes the uncertain, best input setting. Hence the statistical model is of the form $$y=\\eta (\\theta )+\\epsilon ,$$ where $$\\epsilon $$ accounts for measurement, and possibly other, error sources. When nonlinearity is present in $$\\eta (\\cdot )$$, the resulting posterior distribution for the unknown parameters in the Bayesian formulation is typically complex and nonstandard, requiring computationally demanding computational approaches such as Markov chain Monte Carlo (MCMC) to produce multivariate draws from the posterior. Although generally applicable, MCMC requires thousands (or even millions) of evaluations of the physics model $$\\eta (\\cdot )$$. This requirement is problematic if the model takes hours or days to evaluate. To overcome this computational bottleneck, we present an approach adapted from Bayesian model calibration. This approach combines output from an ensemble of computational model runs with physical measurements, within a statistical formulation, to carry out inference. A key component of this approach is a statistical response surface, or emulator, estimated from the ensemble of model runs. We demonstrate this approach with a case study in estimating parameters for a density functional theory model, using experimental mass/binding energy measurements from a collection of atomic nuclei. Lastly, we also demonstrate how this approach produces uncertainties in predictions for recent mass measurements obtained at Argonne National Laboratory.« less

Predicting physical properties of emerging compounds with limited physical and chemical data: QSAR model uncertainty and applicability to military munitions.

PubMed

Bennett, Erin R; Clausen, Jay; Linkov, Eugene; Linkov, Igor

2009-11-01

Reliable, up-front information on physical and biological properties of emerging materials is essential before making a decision and investment to formulate, synthesize, scale-up, test, and manufacture a new material for use in both military and civilian applications. Multiple quantitative structure-activity relationships (QSARs) software tools are available for predicting a material's physical/chemical properties and environmental effects. Even though information on emerging materials is often limited, QSAR software output is treated without sufficient uncertainty analysis. We hypothesize that uncertainty and variability in material properties and uncertainty in model prediction can be too large to provide meaningful results. To test this hypothesis, we predicted octanol water partitioning coefficients (logP) for multiple, similar compounds with limited physical-chemical properties using six different commercial logP calculators (KOWWIN, MarvinSketch, ACD/Labs, ALogP, CLogP, SPARC). Analysis was done for materials with largely uncertain properties that were similar, based on molecular formula, to military compounds (RDX, BTTN, TNT) and pharmaceuticals (Carbamazepine, Gemfibrizol). We have also compared QSAR modeling results for a well-studied pesticide and pesticide breakdown product (Atrazine, DDE). Our analysis shows variability due to structural variations of the emerging chemicals may be several orders of magnitude. The model uncertainty across six software packages was very high (10 orders of magnitude) for emerging materials while it was low for traditional chemicals (e.g. Atrazine). Thus the use of QSAR models for emerging materials screening requires extensive model validation and coupling QSAR output with available empirical data and other relevant information.

Prediction of energy expenditure and physical activity in preschoolers

USDA-ARS?s Scientific Manuscript database

Accurate, nonintrusive, and feasible methods are needed to predict energy expenditure (EE) and physical activity (PA) levels in preschoolers. Herein, we validated cross-sectional time series (CSTS) and multivariate adaptive regression splines (MARS) models based on accelerometry and heart rate (HR) ...

Risk Management and Physical Modelling for Mountainous Natural Hazards

NASA Astrophysics Data System (ADS)

Lehning, Michael; Wilhelm, Christian

Population growth and climate change cause rapid changes in mountainous regions resulting in increased risks of floods, avalanches, debris flows and other natural hazards. Xevents are of particular concern, since attempts to protect against them result in exponentially growing costs. In this contribution, we suggest an integral risk management approach to dealing with natural hazards that occur in mountainous areas. Using the example of a mountain pass road, which can be protected from the danger of an avalanche by engineering (galleries) and/or organisational (road closure) measures, we show the advantage of an optimal combination of both versus the traditional approach, which is to rely solely on engineering structures. Organisational measures become especially important for Xevents because engineering structures cannot be designed for those events. However, organisational measures need a reliable and objective forecast of the hazard. Therefore, we further suggest that such forecasts should be developed using physical numerical modelling. We present the status of current approaches to using physical modelling to predict snow cover stability for avalanche warnings and peak runoff from mountain catchments for flood warnings. While detailed physical models can already predict peak runoff reliably, they are only used to support avalanche warnings. With increased process knowledge and computer power, current developments should lead to a enhanced role for detailed physical models in natural mountain hazard prediction.

Improve SSME power balance model

NASA Technical Reports Server (NTRS)

Karr, Gerald R.

1992-01-01

Effort was dedicated to development and testing of a formal strategy for reconciling uncertain test data with physically limited computational prediction. Specific weaknesses in the logical structure of the current Power Balance Model (PBM) version are described with emphasis given to the main routing subroutines BAL and DATRED. Selected results from a variational analysis of PBM predictions are compared to Technology Test Bed (TTB) variational study results to assess PBM predictive capability. The motivation for systematic integration of uncertain test data with computational predictions based on limited physical models is provided. The theoretical foundation for the reconciliation strategy developed in this effort is presented, and results of a reconciliation analysis of the Space Shuttle Main Engine (SSME) high pressure fuel side turbopump subsystem are examined.

Development of a Conceptual Model to Predict Physical Activity Participation in Adults with Brain Injuries

ERIC Educational Resources Information Center

Driver, Simon

2008-01-01

The purpose was to examine psychosocial factors that influence the physical activity behaviors of adults with brain injuries. Two differing models, based on Harter's model of self-worth, were proposed to examine the relationship between perceived competence, social support, physical self-worth, affect, and motivation. Adults numbering 384 with…

Astrophysical tests for radiative decay of neutrinos and fundamental physics implications

NASA Technical Reports Server (NTRS)

Stecker, F. W.; Brown, R. W.

1981-01-01

The radiative lifetime tau for the decay of massious neutrinos was calculated using various physical models for neutrino decay. The results were then related to the astrophysical problem of the detectability of the decay photons from cosmic neutrinos. Conversely, the astrophysical data were used to place lower limits on tau. These limits are all well below predicted values. However, an observed feature at approximately 1700 A in the ultraviolet background radiation at high galactic latitudes may be from the decay of neutrinos with mass approximately 14 eV. This would require a decay rate much larger than the predictions of standard models but could be indicative of a decay rate possible in composite models or other new physics. Thus an important test for substructure in leptons and quarks or other physics beyond the standard electroweak model may have been found.

Embedded Model Error Representation and Propagation in Climate Models

NASA Astrophysics Data System (ADS)

Sargsyan, K.; Ricciuto, D. M.; Safta, C.; Thornton, P. E.

2017-12-01

Over the last decade, parametric uncertainty quantification (UQ) methods have reached a level of maturity, while the same can not be said about representation and quantification of structural or model errors. Lack of characterization of model errors, induced by physical assumptions, phenomenological parameterizations or constitutive laws, is a major handicap in predictive science. In particular, e.g. in climate models, significant computational resources are dedicated to model calibration without gaining improvement in predictive skill. Neglecting model errors during calibration/tuning will lead to overconfident and biased model parameters. At the same time, the most advanced methods accounting for model error merely correct output biases, augmenting model outputs with statistical error terms that can potentially violate physical laws, or make the calibrated model ineffective for extrapolative scenarios. This work will overview a principled path for representing and quantifying model errors, as well as propagating them together with the rest of the predictive uncertainty budget, including data noise, parametric uncertainties and surrogate-related errors. Namely, the model error terms will be embedded in select model components rather than as external corrections. Such embedding ensures consistency with physical constraints on model predictions, and renders calibrated model predictions meaningful and robust with respect to model errors. Besides, in the presence of observational data, the approach can effectively differentiate model structural deficiencies from those of data acquisition. The methodology is implemented in UQ Toolkit (www.sandia.gov/uqtoolkit), relying on a host of available forward and inverse UQ tools. We will demonstrate the application of the technique on few application of interest, including ACME Land Model calibration via a wide range of measurements obtained at select sites.

Prediction of shallow landslide occurrence: Validation of a physically-based approach through a real case study.

PubMed

Schilirò, Luca; Montrasio, Lorella; Scarascia Mugnozza, Gabriele

2016-11-01

In recent years, physically-based numerical models have frequently been used in the framework of early-warning systems devoted to rainfall-induced landslide hazard monitoring and mitigation. For this reason, in this work we describe the potential of SLIP (Shallow Landslides Instability Prediction), a simplified physically-based model for the analysis of shallow landslide occurrence. In order to test the reliability of this model, a back analysis of recent landslide events occurred in the study area (located SW of Messina, northeastern Sicily, Italy) on October 1st, 2009 was performed. The simulation results have been compared with those obtained for the same event by using TRIGRS, another well-established model for shallow landslide prediction. Afterwards, a simulation over a 2-year span period has been performed for the same area, with the aim of evaluating the performance of SLIP as early warning tool. The results confirm the good predictive capability of the model, both in terms of spatial and temporal prediction of the instability phenomena. For this reason, we recommend an operating procedure for the real-time definition of shallow landslide triggering scenarios at the catchment scale, which is based on the use of SLIP calibrated through a specific multi-methodological approach. Copyright © 2016 Elsevier B.V. All rights reserved.

Predicting Physical Activity-Related Outcomes in Overweight and Obese Adults: A Health Action Process Approach.

PubMed

Hattar, Anne; Pal, Sebely; Hagger, Martin S

2016-03-01

We tested the adequacy of a model based on the Health Action Process Approach (HAPA) in predicting changes in psychological, body composition, and cardiovascular risk outcomes with respect to physical activity participation in overweight and obese adults. Measures of HAPA constructs (action and maintenance self-efficacy, outcome expectancies, action planning, risk perceptions, intentions, behaviour), psychological outcomes (quality of life, depression, anxiety, stress symptoms), body composition variables (body weight, body fat mass), cardiovascular risk measures (total cholesterol, low density lipoprotein), and self-reported physical activity behaviour were administered to participants (N = 74) at baseline, and 6 and 12 weeks later. Data were analysed using variance-based structural equation modelling with residualised change scores for HAPA variables. The model revealed effects of action self-efficacy and outcome expectancies on physical activity intentions, action self-efficacy on maintenance self-efficacy, and maintenance self-efficacy and intentions on action planning. Intention predicted psychological and body composition outcomes indirectly through physical activity behaviour. Action planning was a direct predictor of psychological, cardiovascular, and body composition outcomes. Data supported HAPA hypotheses in relation to intentions and behaviour, but not the role of action planning as a mediator of the intention-behaviour relationship. Action planning predicted outcomes independent of intentions and behaviour. © 2016 The International Association of Applied Psychology.

Coupling of the Models of Human Physiology and Thermal Comfort

NASA Astrophysics Data System (ADS)

Pokorny, J.; Jicha, M.

2013-04-01

A coupled model of human physiology and thermal comfort was developed in Dymola/Modelica. A coupling combines a modified Tanabe model of human physiology and thermal comfort model developed by Zhang. The Coupled model allows predicting the thermal sensation and comfort of both local and overall from local boundary conditions representing ambient and personal factors. The aim of this study was to compare prediction of the Coupled model with the Fiala model prediction and experimental data. Validation data were taken from the literature, mainly from the validation manual of software Theseus-FE [1]. In the paper validation of the model for very light physical activities (1 met) indoor environment with temperatures from 12 °C up to 48 °C is presented. The Coupled model predicts mean skin temperature for cold, neutral and warm environment well. However prediction of core temperature in cold environment is inaccurate and very affected by ambient temperature. Evaluation of thermal comfort in warm environment is supplemented by skin wettedness prediction. The Coupled model is designed for non-uniform and transient environmental conditions; it is also suitable simulation of thermal comfort in vehicles cabins. The usage of the model is limited for very light physical activities up to 1.2 met only.

Physically based approaches incorporating evaporation for early warning predictions of rainfall-induced landslides

NASA Astrophysics Data System (ADS)

Reder, Alfredo; Rianna, Guido; Pagano, Luca

2018-02-01

In the field of rainfall-induced landslides on sloping covers, models for early warning predictions require an adequate trade-off between two aspects: prediction accuracy and timeliness. When a cover's initial hydrological state is a determining factor in triggering landslides, taking evaporative losses into account (or not) could significantly affect both aspects. This study evaluates the performance of three physically based predictive models, converting precipitation and evaporative fluxes into hydrological variables useful in assessing slope safety conditions. Two of the models incorporate evaporation, with one representing evaporation as both a boundary and internal phenomenon, and the other only a boundary phenomenon. The third model totally disregards evaporation. Model performances are assessed by analysing a well-documented case study involving a 2 m thick sloping volcanic cover. The large amount of monitoring data collected for the soil involved in the case study, reconstituted in a suitably equipped lysimeter, makes it possible to propose procedures for calibrating and validating the parameters of the models. All predictions indicate a hydrological singularity at the landslide time (alarm). A comparison of the models' predictions also indicates that the greater the complexity and completeness of the model, the lower the number of predicted hydrological singularities when no landslides occur (false alarms).

PREDICTING SUBSURFACE CONTAMINANT TRANSPORT AND TRANSFORMATION: CONSIDERATIONS FOR MODEL SELECTION AND FIELD VALIDATION

EPA Science Inventory

Predicting subsurface contaminant transport and transformation requires mathematical models based on a variety of physical, chemical, and biological processes. The mathematical model is an attempt to quantitatively describe observed processes in order to permit systematic forecas...

Physics-based model for predicting the performance of a miniature wind turbine

NASA Astrophysics Data System (ADS)

Xu, F. J.; Hu, J. Z.; Qiu, Y. P.; Yuan, F. G.

2011-04-01

A comprehensive physics-based model for predicting the performance of the miniature wind turbine (MWT) for power wireless sensor systems was proposed in this paper. An approximation of the power coefficient of the turbine rotor was made after the turbine rotor performance was measured. Incorporation of the approximation with the equivalent circuit model which was proposed according to the principles of the MWT, the overall system performance of the MWT was predicted. To demonstrate the prediction, the MWT system comprised of a 7.6 cm thorgren plastic propeller as turbine rotor and a DC motor as generator was designed and its performance was tested experimentally. The predicted output voltage, power and system efficiency are matched well with the tested results, which imply that this study holds promise in estimating and optimizing the performance of the MWT.

Leisure-Time Physical Activity and Academic Performance: Cross-Lagged Associations from Adolescence to Young Adulthood

PubMed Central

Aaltonen, Sari; Latvala, Antti; Rose, Richard J.; Kujala, Urho M.; Kaprio, Jaakko; Silventoinen, Karri

2016-01-01

Physical activity and academic performance are positively associated, but the direction of the association is poorly understood. This longitudinal study examined the direction and magnitude of the associations between leisure-time physical activity and academic performance throughout adolescence and young adulthood. The participants were Finnish twins (from 2,859 to 4,190 individuals/study wave) and their families. In a cross-lagged path model, higher academic performance at ages 12, 14 and 17 predicted higher leisure-time physical activity at subsequent time-points (standardized path coefficient at age 14: 0.07 (p < 0.001), age 17: 0.12 (p < 0.001) and age 24: 0.06 (p < 0.05)), whereas physical activity did not predict future academic performance. A cross-lagged model of co-twin differences suggested that academic performance and subsequent physical activity were not associated due to the environmental factors shared by co-twins. Our findings suggest that better academic performance in adolescence modestly predicts more frequent leisure-time physical activity in late adolescence and young adulthood. PMID:27976699

Leisure-Time Physical Activity and Academic Performance: Cross-Lagged Associations from Adolescence to Young Adulthood.

PubMed

Aaltonen, Sari; Latvala, Antti; Rose, Richard J; Kujala, Urho M; Kaprio, Jaakko; Silventoinen, Karri

2016-12-15

Physical activity and academic performance are positively associated, but the direction of the association is poorly understood. This longitudinal study examined the direction and magnitude of the associations between leisure-time physical activity and academic performance throughout adolescence and young adulthood. The participants were Finnish twins (from 2,859 to 4,190 individuals/study wave) and their families. In a cross-lagged path model, higher academic performance at ages 12, 14 and 17 predicted higher leisure-time physical activity at subsequent time-points (standardized path coefficient at age 14: 0.07 (p < 0.001), age 17: 0.12 (p < 0.001) and age 24: 0.06 (p < 0.05)), whereas physical activity did not predict future academic performance. A cross-lagged model of co-twin differences suggested that academic performance and subsequent physical activity were not associated due to the environmental factors shared by co-twins. Our findings suggest that better academic performance in adolescence modestly predicts more frequent leisure-time physical activity in late adolescence and young adulthood.

Infrasound Predictions Using the Weather Research and Forecasting Model: Atmospheric Green's Functions for the Source Physics Experiments 1-6.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Poppeliers, Christian; Aur, Katherine Anderson; Preston, Leiph

This report shows the results of constructing predictive atmospheric models for the Source Physics Experiments 1-6. Historic atmospheric data are combined with topography to construct an atmo- spheric model that corresponds to the predicted (or actual) time of a given SPE event. The models are ultimately used to construct atmospheric Green's functions to be used for subsequent analysis. We present three atmospheric models for each SPE event: an average model based on ten one- hour snap shots of the atmosphere and two extrema models corresponding to the warmest, coolest, windiest, etc. atmospheric snap shots. The atmospheric snap shots consist ofmore » wind, temperature, and pressure profiles of the atmosphere for a one-hour time window centered at the time of the predicted SPE event, as well as nine additional snap shots for each of the nine preceding years, centered at the time and day of the SPE event.« less

Data-adaptive Harmonic Decomposition and Real-time Prediction of Arctic Sea Ice Extent

NASA Astrophysics Data System (ADS)

Kondrashov, Dmitri; Chekroun, Mickael; Ghil, Michael

2017-04-01

Decline in the Arctic sea ice extent (SIE) has profound socio-economic implications and is a focus of active scientific research. Of particular interest is prediction of SIE on subseasonal time scales, i.e. from early summer into fall, when sea ice coverage in Arctic reaches its minimum. However, subseasonal forecasting of SIE is very challenging due to the high variability of ocean and atmosphere over Arctic in summer, as well as shortness of observational data and inadequacies of the physics-based models to simulate sea-ice dynamics. The Sea Ice Outlook (SIO) by Sea Ice Prediction Network (SIPN, http://www.arcus.org/sipn) is a collaborative effort to facilitate and improve subseasonal prediction of September SIE by physics-based and data-driven statistical models. Data-adaptive Harmonic Decomposition (DAH) and Multilayer Stuart-Landau Models (MSLM) techniques [Chekroun and Kondrashov, 2017], have been successfully applied to the nonlinear stochastic modeling, as well as retrospective and real-time forecasting of Multisensor Analyzed Sea Ice Extent (MASIE) dataset in key four Arctic regions. In particular, DAH-MSLM predictions outperformed most statistical models and physics-based models in real-time 2016 SIO submissions. The key success factors are associated with DAH ability to disentangle complex regional dynamics of MASIE by data-adaptive harmonic spatio-temporal patterns that reduce the data-driven modeling effort to elemental MSLMs stacked per frequency with fixed and small number of model coefficients to estimate.

Perceived Autonomy Support in Physical Education and Leisure-Time Physical Activity: A Cross-Cultural Evaluation of the Trans-Contextual Model

ERIC Educational Resources Information Center

Hagger, Martin S.; Chatzisarantis, Nikos L. D.; Barkoukis, Vassilis; Wang, C. K. John; Baranowski, Jaroslaw

2005-01-01

This study tested the replicability and cross-cultural invariance of a trans-contextual model of motivation across 4 samples from diverse cultures. The model proposes a motivational sequence in which perceived autonomy support (PAS) in physical education (PE) predicts autonomous motivation, intentions, and behavior in a leisure-time (LT) physical…

Physical characteristics of shrub and conifer fuels for fire behavior models

Treesearch

Jonathan R. Gallacher; Thomas H. Fletcher; Victoria Lansinger; Sydney Hansen; Taylor Ellsworth; David R. Weise

2017-01-01

The physical properties and dimensions of foliage are necessary inputs for some fire spread models. Currently, almost no data exist on these plant characteristics to fill this need. In this report, we measured the physical properties and dimensions of the foliage from 10 live shrub and conifer fuels throughout a 1-year period. We developed models to predict relative...

Daily Autonomy Support and Sexual Identity Disclosure Predicts Daily Mental and Physical Health Outcomes.

PubMed

Legate, Nicole; Ryan, Richard M; Rogge, Ronald D

2017-06-01

Using a daily diary methodology, we examined how social environments support or fail to support sexual identity disclosure, and associated mental and physical health outcomes. Results showed that variability in disclosure across the diary period related to greater psychological well-being and fewer physical symptoms, suggesting potential adaptive benefits to selectively disclosing. A multilevel path model indicated that perceiving autonomy support in conversations predicted more disclosure, which in turn predicted more need satisfaction, greater well-being, and fewer physical symptoms that day. Finally, mediation analyses revealed that disclosure and need satisfaction explained why perceiving autonomy support in a conversation predicted greater well-being and fewer physical symptoms. That is, perceiving autonomy support in conversations indirectly predicted greater wellness through sexual orientation disclosure, along with feeling authentic and connected in daily interactions with others. Discussion highlights the role of supportive social contexts and everyday opportunities to disclose in affecting sexual minority mental and physical health.

Common neighbours and the local-community-paradigm for topological link prediction in bipartite networks

NASA Astrophysics Data System (ADS)

Daminelli, Simone; Thomas, Josephine Maria; Durán, Claudio; Vittorio Cannistraci, Carlo

2015-11-01

Bipartite networks are powerful descriptions of complex systems characterized by two different classes of nodes and connections allowed only across but not within the two classes. Unveiling physical principles, building theories and suggesting physical models to predict bipartite links such as product-consumer connections in recommendation systems or drug-target interactions in molecular networks can provide priceless information to improve e-commerce or to accelerate pharmaceutical research. The prediction of nonobserved connections starting from those already present in the topology of a network is known as the link-prediction problem. It represents an important subject both in many-body interaction theory in physics and in new algorithms for applied tools in computer science. The rationale is that the existing connectivity structure of a network can suggest where new connections can appear with higher likelihood in an evolving network, or where nonobserved connections are missing in a partially known network. Surprisingly, current complex network theory presents a theoretical bottle-neck: a general framework for local-based link prediction directly in the bipartite domain is missing. Here, we overcome this theoretical obstacle and present a formal definition of common neighbour index and local-community-paradigm (LCP) for bipartite networks. As a consequence, we are able to introduce the first node-neighbourhood-based and LCP-based models for topological link prediction that utilize the bipartite domain. We performed link prediction evaluations in several networks of different size and of disparate origin, including technological, social and biological systems. Our models significantly improve topological prediction in many bipartite networks because they exploit local physical driving-forces that participate in the formation and organization of many real-world bipartite networks. Furthermore, we present a local-based formalism that allows to intuitively implement neighbourhood-based link prediction entirely in the bipartite domain.

Overview of physical models of liquid entrainment in annular gas-liquid flow

NASA Astrophysics Data System (ADS)

Cherdantsev, Andrey V.

2018-03-01

A number of recent papers devoted to development of physically-based models for prediction of liquid entrainment in annular regime of two-phase flow are analyzed. In these models shearing-off the crests of disturbance waves by the gas drag force is supposed to be the physical mechanism of entrainment phenomenon. The models are based on a number of assumptions on wavy structure, including inception of disturbance waves due to Kelvin-Helmholtz instability, linear velocity profile inside liquid film and high degree of three-dimensionality of disturbance waves. Validity of the assumptions is analyzed by comparison to modern experimental observations. It was shown that nearly every assumption is in strong qualitative and quantitative disagreement with experiments, which leads to massive discrepancies between the modeled and real properties of the disturbance waves. As a result, such models over-predict the entrained fraction by several orders of magnitude. The discrepancy is usually reduced using various kinds of empirical corrections. This, combined with empiricism already included in the models, turns the models into another kind of empirical correlations rather than physically-based models.

COMPARISONS OF SPATIAL PATTERNS OF WET DEPOSITION TO MODEL PREDICTIONS

EPA Science Inventory

The Community Multiscale Air Quality model, (CMAQ), is a "one-atmosphere" model, in that it uses a consistent set of chemical reactions and physical principles to predict concentrations of primary pollutants, photochemical smog, and fine aerosols, as well as wet and dry depositi...

Factors Influencing Physical Activity among Postpartum Iranian Women

ERIC Educational Resources Information Center

Roozbahani, Nasrin; Ghofranipour, Fazlollah; Eftekhar Ardabili, Hassan; Hajizadeh, Ebrahim

2014-01-01

Background: Postpartum women are a population at risk for sedentary living. Physical activity (PA) prior to pregnancy may be effective in predicting similar behaviour in the postpartum period. Objective: To test a composite version of the extended transtheoretical model (TTM) by adding "past behaviour" in order to predict PA behaviour…

Statistical and engineering methods for model enhancement

NASA Astrophysics Data System (ADS)

Chang, Chia-Jung

Models which describe the performance of physical process are essential for quality prediction, experimental planning, process control and optimization. Engineering models developed based on the underlying physics/mechanics of the process such as analytic models or finite element models are widely used to capture the deterministic trend of the process. However, there usually exists stochastic randomness in the system which may introduce the discrepancy between physics-based model predictions and observations in reality. Alternatively, statistical models can be used to develop models to obtain predictions purely based on the data generated from the process. However, such models tend to perform poorly when predictions are made away from the observed data points. This dissertation contributes to model enhancement research by integrating physics-based model and statistical model to mitigate the individual drawbacks and provide models with better accuracy by combining the strengths of both models. The proposed model enhancement methodologies including the following two streams: (1) data-driven enhancement approach and (2) engineering-driven enhancement approach. Through these efforts, more adequate models are obtained, which leads to better performance in system forecasting, process monitoring and decision optimization. Among different data-driven enhancement approaches, Gaussian Process (GP) model provides a powerful methodology for calibrating a physical model in the presence of model uncertainties. However, if the data contain systematic experimental errors, the GP model can lead to an unnecessarily complex adjustment of the physical model. In Chapter 2, we proposed a novel enhancement procedure, named as “Minimal Adjustment”, which brings the physical model closer to the data by making minimal changes to it. This is achieved by approximating the GP model by a linear regression model and then applying a simultaneous variable selection of the model and experimental bias terms. Two real examples and simulations are presented to demonstrate the advantages of the proposed approach. Different from enhancing the model based on data-driven perspective, an alternative approach is to focus on adjusting the model by incorporating the additional domain or engineering knowledge when available. This often leads to models that are very simple and easy to interpret. The concepts of engineering-driven enhancement are carried out through two applications to demonstrate the proposed methodologies. In the first application where polymer composite quality is focused, nanoparticle dispersion has been identified as a crucial factor affecting the mechanical properties. Transmission Electron Microscopy (TEM) images are commonly used to represent nanoparticle dispersion without further quantifications on its characteristics. In Chapter 3, we developed the engineering-driven nonhomogeneous Poisson random field modeling strategy to characterize nanoparticle dispersion status of nanocomposite polymer, which quantitatively represents the nanomaterial quality presented through image data. The model parameters are estimated through the Bayesian MCMC technique to overcome the challenge of limited amount of accessible data due to the time consuming sampling schemes. The second application is to calibrate the engineering-driven force models of laser-assisted micro milling (LAMM) process statistically, which facilitates a systematic understanding and optimization of targeted processes. In Chapter 4, the force prediction interval has been derived by incorporating the variability in the runout parameters as well as the variability in the measured cutting forces. The experimental results indicate that the model predicts the cutting force profile with good accuracy using a 95% confidence interval. To conclude, this dissertation is the research drawing attention to model enhancement, which has considerable impacts on modeling, design, and optimization of various processes and systems. The fundamental methodologies of model enhancement are developed and further applied to various applications. These research activities developed engineering compliant models for adequate system predictions based on observational data with complex variable relationships and uncertainty, which facilitate process planning, monitoring, and real-time control.

Sleep Quality Prediction From Wearable Data Using Deep Learning.

PubMed

Sathyanarayana, Aarti; Joty, Shafiq; Fernandez-Luque, Luis; Ofli, Ferda; Srivastava, Jaideep; Elmagarmid, Ahmed; Arora, Teresa; Taheri, Shahrad

2016-11-04

The importance of sleep is paramount to health. Insufficient sleep can reduce physical, emotional, and mental well-being and can lead to a multitude of health complications among people with chronic conditions. Physical activity and sleep are highly interrelated health behaviors. Our physical activity during the day (ie, awake time) influences our quality of sleep, and vice versa. The current popularity of wearables for tracking physical activity and sleep, including actigraphy devices, can foster the development of new advanced data analytics. This can help to develop new electronic health (eHealth) applications and provide more insights into sleep science. The objective of this study was to evaluate the feasibility of predicting sleep quality (ie, poor or adequate sleep efficiency) given the physical activity wearable data during awake time. In this study, we focused on predicting good or poor sleep efficiency as an indicator of sleep quality. Actigraphy sensors are wearable medical devices used to study sleep and physical activity patterns. The dataset used in our experiments contained the complete actigraphy data from a subset of 92 adolescents over 1 full week. Physical activity data during awake time was used to create predictive models for sleep quality, in particular, poor or good sleep efficiency. The physical activity data from sleep time was used for the evaluation. We compared the predictive performance of traditional logistic regression with more advanced deep learning methods: multilayer perceptron (MLP), convolutional neural network (CNN), simple Elman-type recurrent neural network (RNN), long short-term memory (LSTM-RNN), and a time-batched version of LSTM-RNN (TB-LSTM). Deep learning models were able to predict the quality of sleep (ie, poor or good sleep efficiency) based on wearable data from awake periods. More specifically, the deep learning methods performed better than traditional logistic regression. “CNN had the highest specificity and sensitivity, and an overall area under the receiver operating characteristic (ROC) curve (AUC) of 0.9449, which was 46% better as compared with traditional logistic regression (0.6463). Deep learning methods can predict the quality of sleep based on actigraphy data from awake periods. These predictive models can be an important tool for sleep research and to improve eHealth solutions for sleep. ©Aarti Sathyanarayana, Shafiq Joty, Luis Fernandez-Luque, Ferda Ofli, Jaideep Srivastava, Ahmed Elmagarmid, Teresa Arora, Shahrad Taheri. Originally published in JMIR Mhealth and Uhealth (http://mhealth.jmir.org), 04.11.2016.

Sleep Quality Prediction From Wearable Data Using Deep Learning

PubMed Central

Sathyanarayana, Aarti; Joty, Shafiq; Ofli, Ferda; Srivastava, Jaideep; Elmagarmid, Ahmed; Arora, Teresa; Taheri, Shahrad

2016-01-01

Background The importance of sleep is paramount to health. Insufficient sleep can reduce physical, emotional, and mental well-being and can lead to a multitude of health complications among people with chronic conditions. Physical activity and sleep are highly interrelated health behaviors. Our physical activity during the day (ie, awake time) influences our quality of sleep, and vice versa. The current popularity of wearables for tracking physical activity and sleep, including actigraphy devices, can foster the development of new advanced data analytics. This can help to develop new electronic health (eHealth) applications and provide more insights into sleep science. Objective The objective of this study was to evaluate the feasibility of predicting sleep quality (ie, poor or adequate sleep efficiency) given the physical activity wearable data during awake time. In this study, we focused on predicting good or poor sleep efficiency as an indicator of sleep quality. Methods Actigraphy sensors are wearable medical devices used to study sleep and physical activity patterns. The dataset used in our experiments contained the complete actigraphy data from a subset of 92 adolescents over 1 full week. Physical activity data during awake time was used to create predictive models for sleep quality, in particular, poor or good sleep efficiency. The physical activity data from sleep time was used for the evaluation. We compared the predictive performance of traditional logistic regression with more advanced deep learning methods: multilayer perceptron (MLP), convolutional neural network (CNN), simple Elman-type recurrent neural network (RNN), long short-term memory (LSTM-RNN), and a time-batched version of LSTM-RNN (TB-LSTM). Results Deep learning models were able to predict the quality of sleep (ie, poor or good sleep efficiency) based on wearable data from awake periods. More specifically, the deep learning methods performed better than traditional linear regression. CNN had the highest specificity and sensitivity, and an overall area under the receiver operating characteristic (ROC) curve (AUC) of 0.9449, which was 46% better as compared with traditional linear regression (0.6463). Conclusions Deep learning methods can predict the quality of sleep based on actigraphy data from awake periods. These predictive models can be an important tool for sleep research and to improve eHealth solutions for sleep. PMID:27815231

Multidimensional Physical Self-Concept of Athletes with Physical Disabilities

ERIC Educational Resources Information Center

Shapiro, Deborah R.; Martin, Jeffrey J.

2010-01-01

The purposes of this investigation were first to predict reported PA (physical activity) behavior and self-esteem using a multidimensional physical self-concept model and second to describe perceptions of multidimensional physical self-concept (e.g., strength, endurance, sport competence) among athletes with physical disabilities. Athletes (N =…

On entropy, financial markets and minority games

NASA Astrophysics Data System (ADS)

Zapart, Christopher A.

2009-04-01

The paper builds upon an earlier statistical analysis of financial time series with Shannon information entropy, published in [L. Molgedey, W. Ebeling, Local order, entropy and predictability of financial time series, European Physical Journal B-Condensed Matter and Complex Systems 15/4 (2000) 733-737]. A novel generic procedure is proposed for making multistep-ahead predictions of time series by building a statistical model of entropy. The approach is first demonstrated on the chaotic Mackey-Glass time series and later applied to Japanese Yen/US dollar intraday currency data. The paper also reinterprets Minority Games [E. Moro, The minority game: An introductory guide, Advances in Condensed Matter and Statistical Physics (2004)] within the context of physical entropy, and uses models derived from minority game theory as a tool for measuring the entropy of a model in response to time series. This entropy conditional upon a model is subsequently used in place of information-theoretic entropy in the proposed multistep prediction algorithm.

Causal Modeling of Secondary Science Students' Intentions to Enroll in Physics.

ERIC Educational Resources Information Center

Crawley, Frank E.; Black, Carolyn B.

1992-01-01

Reports a study using the causal modeling method to verify underlying causes of student interest in enrolling in physics as predicted by the theory of planned behavior. Families were identified as major referents in the social support system for physics enrollment. Course and extracurricular conflicts and fear of failure were primary beliefs…

Some predictions of the attached eddy model for a high Reynolds number boundary layer.

PubMed

Nickels, T B; Marusic, I; Hafez, S; Hutchins, N; Chong, M S

2007-03-15

Many flows of practical interest occur at high Reynolds number, at which the flow in most of the boundary layer is turbulent, showing apparently random fluctuations in velocity across a wide range of scales. The range of scales over which these fluctuations occur increases with the Reynolds number and hence high Reynolds number flows are difficult to compute or predict. In this paper, we discuss the structure of these flows and describe a physical model, based on the attached eddy hypothesis, which makes predictions for the statistical properties of these flows and their variation with Reynolds number. The predictions are shown to compare well with the results from recent experiments in a new purpose-built high Reynolds number facility. The model is also shown to provide a clear physical explanation for the trends in the data. The limits of applicability of the model are also discussed.

Predictability of the geospace variations and measuring the capability to model the state of the system

NASA Astrophysics Data System (ADS)

Pulkkinen, A.

2012-12-01

Empirical modeling has been the workhorse of the past decades in predicting the state of the geospace. For example, numerous empirical studies have shown that global geoeffectiveness indices such as Kp and Dst are generally well predictable from the solar wind input. These successes have been facilitated partly by the strongly externally driven nature of the system. Although characterizing the general state of the system is valuable and empirical modeling will continue playing an important role, refined physics-based quantification of the state of the system has been the obvious next step in moving toward more mature science. Importantly, more refined and localized products are needed also for space weather purposes. Predictions of local physical quantities are necessary to make physics-based links to the impacts on specific systems. As we have introduced more localized predictions of the geospace state one central question is how predictable these local quantities are? This complex question can be addressed by rigorously measuring the model performance against the observed data. Space sciences community has made great advanced on this topic over the past few years and there are ongoing efforts in SHINE, CEDAR and GEM to carry out community-wide evaluations of the state-of-the-art solar and heliospheric, ionosphere-thermosphere and geospace models, respectively. These efforts will help establish benchmarks and thus provide means to measure the progress in the field analogous to monitoring of the improvement in lower atmospheric weather predictions carried out rigorously since 1980s. In this paper we will discuss some of the latest advancements in predicting the local geospace parameters and give an overview of some of the community efforts to rigorously measure the model performances. We will also briefly discuss some of the future opportunities for advancing the geospace modeling capability. These will include further development in data assimilation and ensemble modeling (e.g. taking into account uncertainty in the inflow boundary conditions).

Forecasting runout of rock and debris avalanches

USGS Publications Warehouse

Iverson, Richard M.; Evans, S.G.; Mugnozza, G.S.; Strom, A.; Hermanns, R.L.

2006-01-01

Physically based mathematical models and statistically based empirical equations each may provide useful means of forecasting runout of rock and debris avalanches. This paper compares the foundations, strengths, and limitations of a physically based model and a statistically based forecasting method, both of which were developed to predict runout across three-dimensional topography. The chief advantage of the physically based model results from its ties to physical conservation laws and well-tested axioms of soil and rock mechanics, such as the Coulomb friction rule and effective-stress principle. The output of this model provides detailed information about the dynamics of avalanche runout, at the expense of high demands for accurate input data, numerical computation, and experimental testing. In comparison, the statistical method requires relatively modest computation and no input data except identification of prospective avalanche source areas and a range of postulated avalanche volumes. Like the physically based model, the statistical method yields maps of predicted runout, but it provides no information on runout dynamics. Although the two methods differ significantly in their structure and objectives, insights gained from one method can aid refinement of the other.

Improving orbit prediction accuracy through supervised machine learning

NASA Astrophysics Data System (ADS)

Peng, Hao; Bai, Xiaoli

2018-05-01

Due to the lack of information such as the space environment condition and resident space objects' (RSOs') body characteristics, current orbit predictions that are solely grounded on physics-based models may fail to achieve required accuracy for collision avoidance and have led to satellite collisions already. This paper presents a methodology to predict RSOs' trajectories with higher accuracy than that of the current methods. Inspired by the machine learning (ML) theory through which the models are learned based on large amounts of observed data and the prediction is conducted without explicitly modeling space objects and space environment, the proposed ML approach integrates physics-based orbit prediction algorithms with a learning-based process that focuses on reducing the prediction errors. Using a simulation-based space catalog environment as the test bed, the paper demonstrates three types of generalization capability for the proposed ML approach: (1) the ML model can be used to improve the same RSO's orbit information that is not available during the learning process but shares the same time interval as the training data; (2) the ML model can be used to improve predictions of the same RSO at future epochs; and (3) the ML model based on a RSO can be applied to other RSOs that share some common features.

Orbital Debris Modeling

NASA Technical Reports Server (NTRS)

Liou, J. C.

2012-01-01

Presentation outlne: (1) The NASA Orbital Debris (OD) Engineering Model -- A mathematical model capable of predicting OD impact risks for the ISS and other critical space assets (2) The NASA OD Evolutionary Model -- A physical model capable of predicting future debris environment based on user-specified scenarios (3) The NASA Standard Satellite Breakup Model -- A model describing the outcome of a satellite breakup (explosion or collision)

Paths to leisure physical activity among adults with intellectual disabilities: self-efficacy and social support.

PubMed

Peterson, Jana J; Lowe, John B; Peterson, N Andrew; Nothwehr, Faryle K; Janz, Kathleen F; Lobas, Jeffrey G

2008-01-01

This study tested a path model that included perceptions of social support and self-efficacy for leisure physical activity and leisure physical activity participation among adults with intellectual disabilities. A cross-sectional design was used. Data was collected via oral interview. Community-based group, supported-living settings in one Midwestern state. A total of 152 adults with mild to moderate intellectual disabilities, which provided a 39% response rate. Self-efficacy and social support (from family, residential staff and peers with disabilities) for leisure physical activity were assessed using self-reported scales. Leisure physical activity participation was measured with a self-reported checklist of the frequency of leisure physical activity participation. Path analysis was conducted for the entire sample and was repeated for younger and older age groups. The hypothesized model fit the data from each group. Social support and self-efficacy predicted physical activity participation, and self-efficacy served as a mediator between social support and physical activity. Significant sources of social support differed between groups; among younger participants, social support from family predicted physical activity, whereas, for the older group, social support from staff and peers predicted physical activity. Self-efficacy and social support for leisure physical activity are related to leisure physical activity participation among adults with intellectual disabilities who are receiving supported-living services. The results provide information to guide health promotion programs for this group.

Mothers' Expectancies and Young Adolescents' Perceived Physical Competence: A Yearlong Study.

ERIC Educational Resources Information Center

Bois, Julien E.; Sarrazin, Philippe G.; Brustad, Robert J.; Trouilloud, David O.; Cury, Francois

2002-01-01

Investigated the role of mothers' expectancies in shaping their child's perceived physical competence. Structural equation modeling revealed that mothers' perceptions of their child's physical competence predicted their child's own perceived physical competence 1 year later, independent of the child's previously demonstrated physical ability and…

The CEOP Inter-Monsoon Studies (CIMS)

NASA Technical Reports Server (NTRS)

Lau, William K. M.

2003-01-01

Prediction of climate relies on models, and better model prediction depends on good model physics. Improving model physics requires the maximal utilization of climate data of the past, present and future. CEOP provides the first example of a comprehensive, integrated global and regional data set, consisting of globally gridded data, reference site in-situ observations, model location time series (MOLTS), and integrated satellite data for a two-year period covering two complete annual cycles of 2003-2004. The monsoon regions are the most important socio-economically in terms of devastation by floods and droughts, and potential impacts from climate change md fluctuatinns nf the hydrologic cyc!e. Scientifically, it is most challenging, because of complex interactions of atmosphere, land and oceans, local vs. remote forcings in contributing to climate variability and change in the region. Given that many common features, and physical teleconnection exist among different monsoon regions, an international research focus on monsoon must be coordinated and sustained. Current models of the monsoon are grossly inadequate for regional predictions. For improvement, models must be confronted with relevant observations, and model physic developers must be made to be aware of the wealth of information from existing climate data, field measurements, and satellite data that can be used to improve models. Model transferability studles must be conducted. CIMS is a major initiative under CEOP to engage the modeling and the observational communities to join in a coordinated effort to study the monsoons. The objectives of CIMS are (a) To provide a better understanding of fundamental physical processes (diurnal cycle, annual cycle, and intraseasonal oscillations) in monsoon regions around the world and (b) To demonstrate the synergy and utility of CEOP data in providing a pathway for model physics evaluation and improvement. In this talk, I will present the basic concepts of CIMS and the key scientific problems facing monsoon climates and provide examples of common monsoon features, and possible monsoon induced teleconnections linking different parts of the world.

Between tide and wave marks: a unifying model of physical zonation on littoral shores

PubMed Central

Bird, Christopher E.; Franklin, Erik C.; Smith, Celia M.

2013-01-01

The effects of tides on littoral marine habitats are so ubiquitous that shorelines are commonly described as ‘intertidal’, whereas waves are considered a secondary factor that simply modifies the intertidal habitat. However mean significant wave height exceeds tidal range at many locations worldwide. Here we construct a simple sinusoidal model of coastal water level based on both tidal range and wave height. From the patterns of emergence and submergence predicted by the model, we derive four vertical shoreline benchmarks which bracket up to three novel, spatially distinct, and physically defined zones. The (1) emergent tidal zone is characterized by tidally driven emergence in air; the (2) wave zone is characterized by constant (not periodic) wave wash; and the (3) submergent tidal zone is characterized by tidally driven submergence. The decoupling of tidally driven emergence and submergence made possible by wave action is a critical prediction of the model. On wave-dominated shores (wave height ≫ tidal range), all three zones are predicted to exist separately, but on tide-dominated shores (tidal range ≫ wave height) the wave zone is absent and the emergent and submergent tidal zones overlap substantially, forming the traditional “intertidal zone”. We conclude by incorporating time and space in the model to illustrate variability in the physical conditions and zonation on littoral shores. The wave:tide physical zonation model is a unifying framework that can facilitate our understanding of physical conditions on littoral shores whether tropical or temperate, marine or lentic. PMID:24109544

Progress on Implementing Additional Physics Schemes into MPAS-A v5.1 for Next Generation Air Quality Modeling

EPA Science Inventory

The U.S. Environmental Protection Agency (USEPA) has a team of scientists developing a next generation air quality modeling system employing the Model for Prediction Across Scales – Atmosphere (MPAS-A) as its meteorological foundation. Several preferred physics schemes and ...

Dynamic Socialized Gaussian Process Models for Human Behavior Prediction in a Health Social Network

PubMed Central

Shen, Yelong; Phan, NhatHai; Xiao, Xiao; Jin, Ruoming; Sun, Junfeng; Piniewski, Brigitte; Kil, David; Dou, Dejing

2016-01-01

Modeling and predicting human behaviors, such as the level and intensity of physical activity, is a key to preventing the cascade of obesity and helping spread healthy behaviors in a social network. In our conference paper, we have developed a social influence model, named Socialized Gaussian Process (SGP), for socialized human behavior modeling. Instead of explicitly modeling social influence as individuals' behaviors influenced by their friends' previous behaviors, SGP models the dynamic social correlation as the result of social influence. The SGP model naturally incorporates personal behavior factor and social correlation factor (i.e., the homophily principle: Friends tend to perform similar behaviors) into a unified model. And it models the social influence factor (i.e., an individual's behavior can be affected by his/her friends) implicitly in dynamic social correlation schemes. The detailed experimental evaluation has shown the SGP model achieves better prediction accuracy compared with most of baseline methods. However, a Socialized Random Forest model may perform better at the beginning compared with the SGP model. One of the main reasons is the dynamic social correlation function is purely based on the users' sequential behaviors without considering other physical activity-related features. To address this issue, we further propose a novel “multi-feature SGP model” (mfSGP) which improves the SGP model by using multiple physical activity-related features in the dynamic social correlation learning. Extensive experimental results illustrate that the mfSGP model clearly outperforms all other models in terms of prediction accuracy and running time. PMID:27746515

An integrated physiology model to study regional lung damage effects and the physiologic response

PubMed Central

2014-01-01

Background This work expands upon a previously developed exercise dynamic physiology model (DPM) with the addition of an anatomic pulmonary system in order to quantify the impact of lung damage on oxygen transport and physical performance decrement. Methods A pulmonary model is derived with an anatomic structure based on morphometric measurements, accounting for heterogeneous ventilation and perfusion observed experimentally. The model is incorporated into an existing exercise physiology model; the combined system is validated using human exercise data. Pulmonary damage from blast, blunt trauma, and chemical injury is quantified in the model based on lung fluid infiltration (edema) which reduces oxygen delivery to the blood. The pulmonary damage component is derived and calibrated based on published animal experiments; scaling laws are used to predict the human response to lung injury in terms of physical performance decrement. Results The augmented dynamic physiology model (DPM) accurately predicted the human response to hypoxia, altitude, and exercise observed experimentally. The pulmonary damage parameters (shunt and diffusing capacity reduction) were fit to experimental animal data obtained in blast, blunt trauma, and chemical damage studies which link lung damage to lung weight change; the model is able to predict the reduced oxygen delivery in damage conditions. The model accurately estimates physical performance reduction with pulmonary damage. Conclusions We have developed a physiologically-based mathematical model to predict performance decrement endpoints in the presence of thoracic damage; simulations can be extended to estimate human performance and escape in extreme situations. PMID:25044032

Persistent Physical Symptoms as Perceptual Dysregulation: A Neuropsychobehavioral Model and Its Clinical Implications.

PubMed

Henningsen, Peter; Gündel, Harald; Kop, Willem J; Löwe, Bernd; Martin, Alexandra; Rief, Winfried; Rosmalen, Judith G M; Schröder, Andreas; van der Feltz-Cornelis, Christina; Van den Bergh, Omer

2018-06-01

The mechanisms underlying the perception and experience of persistent physical symptoms are not well understood, and in the models, the specific relevance of peripheral input versus central processing, or of neurobiological versus psychosocial factors in general, is not clear. In this article, we proposed a model for this clinical phenomenon that is designed to be coherent with an underlying, relatively new model of the normal brain functions involved in the experience of bodily signals. Based on a review of recent literature, we describe central elements of this model and its clinical implications. In the model, the brain is seen as an active predictive processing or inferential device rather than one that is passively waiting for sensory input. A central aspect of the model is the attempt of the brain to minimize prediction errors that result from constant comparisons of predictions and sensory input. Two possibilities exist: adaptation of the generative model underlying the predictions or alteration of the sensory input via autonomic nervous activation (in the case of interoception). Following this model, persistent physical symptoms can be described as "failures of inference" and clinically well-known factors such as expectation are assigned a role, not only in the later amplification of bodily signals but also in the very basis of symptom perception. We discuss therapeutic implications of such a model including new interpretations for established treatments as well as new options such as virtual reality techniques combining exteroceptive and interoceptive information.

Final Report, DOE Early Career Award: Predictive modeling of complex physical systems: new tools for statistical inference, uncertainty quantification, and experimental design

DOE Office of Scientific and Technical Information (OSTI.GOV)

Marzouk, Youssef

Predictive simulation of complex physical systems increasingly rests on the interplay of experimental observations with computational models. Key inputs, parameters, or structural aspects of models may be incomplete or unknown, and must be developed from indirect and limited observations. At the same time, quantified uncertainties are needed to qualify computational predictions in the support of design and decision-making. In this context, Bayesian statistics provides a foundation for inference from noisy and limited data, but at prohibitive computional expense. This project intends to make rigorous predictive modeling *feasible* in complex physical systems, via accelerated and scalable tools for uncertainty quantification, Bayesianmore » inference, and experimental design. Specific objectives are as follows: 1. Develop adaptive posterior approximations and dimensionality reduction approaches for Bayesian inference in high-dimensional nonlinear systems. 2. Extend accelerated Bayesian methodologies to large-scale {\\em sequential} data assimilation, fully treating nonlinear models and non-Gaussian state and parameter distributions. 3. Devise efficient surrogate-based methods for Bayesian model selection and the learning of model structure. 4. Develop scalable simulation/optimization approaches to nonlinear Bayesian experimental design, for both parameter inference and model selection. 5. Demonstrate these inferential tools on chemical kinetic models in reacting flow, constructing and refining thermochemical and electrochemical models from limited data. Demonstrate Bayesian filtering on canonical stochastic PDEs and in the dynamic estimation of inhomogeneous subsurface properties and flow fields.« less

Surrogate screening models for the low physical activity criterion of frailty.

PubMed

Eckel, Sandrah P; Bandeen-Roche, Karen; Chaves, Paulo H M; Fried, Linda P; Louis, Thomas A

2011-06-01

Low physical activity, one of five criteria in a validated clinical phenotype of frailty, is assessed by a standardized, semiquantitative questionnaire on up to 20 leisure time activities. Because of the time demanded to collect the interview data, it has been challenging to translate to studies other than the Cardiovascular Health Study (CHS), for which it was developed. Considering subsets of activities, we identified and evaluated streamlined surrogate assessment methods and compared them to one implemented in the Women's Health and Aging Study (WHAS). Using data on men and women ages 65 and older from the CHS, we applied logistic regression models to rank activities by "relative influence" in predicting low physical activity.We considered subsets of the most influential activities as inputs to potential surrogate models (logistic regressions). We evaluated predictive accuracy and predictive validity using the area under receiver operating characteristic curves and assessed criterion validity using proportional hazards models relating frailty status (defined using the surrogate) to mortality. Walking for exercise and moderately strenuous household chores were highly influential for both genders. Women required fewer activities than men for accurate classification. The WHAS model (8 CHS activities) was an effective surrogate, but a surrogate using 6 activities (walking, chores, gardening, general exercise, mowing and golfing) was also highly predictive. We recommend a 6 activity questionnaire to assess physical activity for men and women. If efficiency is essential and the study involves only women, fewer activities can be included.

Predicting cyberbullying perpetration in emerging adults: A theoretical test of the Barlett Gentile Cyberbullying Model.

PubMed

Barlett, Christopher; Chamberlin, Kristina; Witkower, Zachary

2017-04-01

The Barlett and Gentile Cyberbullying Model (BGCM) is a learning-based theory that posits the importance of positive cyberbullying attitudes predicting subsequent cyberbullying perpetration. Furthermore, the tenants of the BGCM state that cyberbullying attitude are likely to form when the online aggressor believes that the online environment allows individuals of all physical sizes to harm others and they are perceived as anonymous. Past work has tested parts of the BGCM; no study has used longitudinal methods to examine this model fully. The current study (N = 161) employed a three-wave longitudinal design to test the BGCM. Participants (age range: 18-24) completed measures of the belief that physical strength is irrelevant online and anonymity perceptions at Wave 1, cyberbullying attitudes at Wave 2, and cyberbullying perpetration at Wave 3. Results showed strong support for the BGCM: anonymity perceptions and the belief that physical attributes are irrelevant online at Wave 1 predicted Wave 2 cyberbullying attitudes, which predicted subsequent Wave 3 cyberbullying perpetration. These results support the BGCM and are the first to show empirical support for this model. Aggr. Behav. 43:147-154, 2017. © 2016 Wiley Periodicals, Inc. © 2016 Wiley Periodicals, Inc.

Validated Predictions of Metabolic Energy Consumption for Submaximal Effort Movement

PubMed Central

Tsianos, George A.; MacFadden, Lisa N.

2016-01-01

Physical performance emerges from complex interactions among many physiological systems that are largely driven by the metabolic energy demanded. Quantifying metabolic demand is an essential step for revealing the many mechanisms of physical performance decrement, but accurate predictive models do not exist. The goal of this study was to investigate if a recently developed model of muscle energetics and force could be extended to reproduce the kinematics, kinetics, and metabolic demand of submaximal effort movement. Upright dynamic knee extension against various levels of ergometer load was simulated. Task energetics were estimated by combining the model of muscle contraction with validated models of lower limb musculotendon paths and segment dynamics. A genetic algorithm was used to compute the muscle excitations that reproduced the movement with the lowest energetic cost, which was determined to be an appropriate criterion for this task. Model predictions of oxygen uptake rate (VO2) were well within experimental variability for the range over which the model parameters were confidently known. The model's accurate estimates of metabolic demand make it useful for assessing the likelihood and severity of physical performance decrement for a given task as well as investigating underlying physiologic mechanisms. PMID:27248429

Prediction of porosity of food materials during drying: Current challenges and directions.

PubMed

Joardder, Mohammad U H; Kumar, C; Karim, M A

2017-07-18

Pore formation in food samples is a common physical phenomenon observed during dehydration processes. The pore evolution during drying significantly affects the physical properties and quality of dried foods. Therefore, it should be taken into consideration when predicting transport processes in the drying sample. Characteristics of pore formation depend on the drying process parameters, product properties and processing time. Understanding the physics of pore formation and evolution during drying will assist in accurately predicting the drying kinetics and quality of food materials. Researchers have been trying to develop mathematical models to describe the pore formation and evolution during drying. In this study, existing porosity models are critically analysed and limitations are identified. Better insight into the factors affecting porosity is provided, and suggestions are proposed to overcome the limitations. These include considerations of process parameters such as glass transition temperature, sample temperature, and variable material properties in the porosity models. Several researchers have proposed models for porosity prediction of food materials during drying. However, these models are either very simplistic or empirical in nature and failed to consider relevant significant factors that influence porosity. In-depth understanding of characteristics of the pore is required for developing a generic model of porosity. A micro-level analysis of pore formation is presented for better understanding, which will help in developing an accurate and generic porosity model.

Experimental characterization and modeling of isothermal and nonisothermal physical aging in glassy polymer films

NASA Astrophysics Data System (ADS)

Guo, Yunlong

This dissertation focuses on nonisothermal physical aging of polymers from both experimental and theoretical aspects. The study concentrates on pure polymers rather than fiber-reinforced composites; this step removes several complicating factors to simplify the study. It is anticipated that the findings of this work can then be applied to composite materials applications. The physical aging tests in this work are performed using a dynamic mechanical analyzer (DMA). The viscoelastic response of glassy polymers under various loading and thermal histories are observed as stress-strain data at a series of time points. The first stage of the experimental work involves the characterization of the isothermal physical aging behavior of two advanced thermoplastics. The second stage conducts tests on the same materials with varying thermal histories and with long-term test duration. This forms the basis to assess and modify a nonisothermal physical aging model (KAHR-ate model). Based on the experimental findings, the KAHR-ate model has been revised by new correlations between aging shift factors and volume response; this revised model performed well in predicting the nonisothermal physical aging behavior of glassy polymers. In the work on isothermal physical aging, short-term creep and stress relaxation tests were performed at several temperatures within 15-35°C below the glass transition temperature (Tg) at various aging times, using the short-term test method established by Struik. Stress and strain levels were such that the materials remained in the linear viscoelastic regime. These curves were then shifted together to determine momentary master curves and shift rates. In order to validate the obtained isothermal physical aging behavior, the results of creep and stress relaxation testing were compared and shown to be consistent with one another using appropriate interconversion of the viscoelastic material functions. Time-temperature superposition of the master curves was also performed. The temperature shift factors and aging shift rates for both PEEK and PPS were consistent for both creep and stress relaxation test results. Nonisothermal physical aging was monitored by sequential short-term creep tests after a series of temperature jumps; the resulting strain histories were analyzed to determine aging shift factors (ate) for each of the creep tests. The nonisothermal aging response was predicted using the KAHR-ate model, which combines the KAHR model of volume recovery with a suitable linear relationship between aging shift factors and specific volume. The KAHR-ate model can be utilized to both predict aging response and to determine necessary model parameters from a set of aging shift factor data. For the PEEK and PPS materials considered in the current study, predictions of mechanical response were demonstrated to be in good agreement with the experimental results for several complicated thermal histories. In addition to short-term nonisothermal aging, long-term creep tests under identical thermal conditions were also analyzed. Effective time theory was unitized to predict long-term response under both isothermal and nonisothermal temperature histories. The long-term compliance after a series of temperature changes was predicted by the KAHR- ate model, and the theoretical predictions and experimental data showed good agreement for various thermal histories. Lastly, physical aging behavior of PPS near the glass transition temperature was investigated, in order to observe the mechanical response in the process of the evolution of the material into equilibrium. At several temperatures near Tg, the time need to reach equilibrium were determined by the creep test results at various aging times. In addition to isothermal physical aging, mechanical shift factors in the period of approaching equilibrium at a common temperature after temperature up-jumps and down-jumps are monitored from creep tests; prior to these temperature jumps, the materials were aged to reach equilibrium states. From these tests, asymmetry of approaching equilibrium phenomenon in ate was observed, which is first-time reported in the literature. This finding shows the similarity between the thermodynamic and mechanical properties during structural relaxation. This work will lead to improved understanding of the viscoelastic behavior of glassy polymers, which is important for better understanding and design of PMCs in elevated temperature applications. With the above findings, this dissertation deals with nonisothermal physical aging of glassy polymers, including both experimental characterization and constructing a framework for predictions of mechanical behavior of polymeric materials under complicated thermal conditions. (Abstract shortened by UMI.)

The distribution of density in supersonic turbulence

NASA Astrophysics Data System (ADS)

Squire, Jonathan; Hopkins, Philip F.

2017-11-01

We propose a model for the statistics of the mass density in supersonic turbulence, which plays a crucial role in star formation and the physics of the interstellar medium (ISM). The model is derived by considering the density to be arranged as a collection of strong shocks of width ˜ M^{-2}, where M is the turbulent Mach number. With two physically motivated parameters, the model predicts all density statistics for M>1 turbulence: the density probability distribution and its intermittency (deviation from lognormality), the density variance-Mach number relation, power spectra and structure functions. For the proposed model parameters, reasonable agreement is seen between model predictions and numerical simulations, albeit within the large uncertainties associated with current simulation results. More generally, the model could provide a useful framework for more detailed analysis of future simulations and observational data. Due to the simple physical motivations for the model in terms of shocks, it is straightforward to generalize to more complex physical processes, which will be helpful in future more detailed applications to the ISM. We see good qualitative agreement between such extensions and recent simulations of non-isothermal turbulence.

Physics-Based Hazard Assessment for Critical Structures Near Large Earthquake Sources

NASA Astrophysics Data System (ADS)

Hutchings, L.; Mert, A.; Fahjan, Y.; Novikova, T.; Golara, A.; Miah, M.; Fergany, E.; Foxall, W.

2017-09-01

We argue that for critical structures near large earthquake sources: (1) the ergodic assumption, recent history, and simplified descriptions of the hazard are not appropriate to rely on for earthquake ground motion prediction and can lead to a mis-estimation of the hazard and risk to structures; (2) a physics-based approach can address these issues; (3) a physics-based source model must be provided to generate realistic phasing effects from finite rupture and model near-source ground motion correctly; (4) wave propagations and site response should be site specific; (5) a much wider search of possible sources of ground motion can be achieved computationally with a physics-based approach; (6) unless one utilizes a physics-based approach, the hazard and risk to structures has unknown uncertainties; (7) uncertainties can be reduced with a physics-based approach, but not with an ergodic approach; (8) computational power and computer codes have advanced to the point that risk to structures can be calculated directly from source and site-specific ground motions. Spanning the variability of potential ground motion in a predictive situation is especially difficult for near-source areas, but that is the distance at which the hazard is the greatest. The basis of a "physical-based" approach is ground-motion syntheses derived from physics and an understanding of the earthquake process. This is an overview paper and results from previous studies are used to make the case for these conclusions. Our premise is that 50 years of strong motion records is insufficient to capture all possible ranges of site and propagation path conditions, rupture processes, and spatial geometric relationships between source and site. Predicting future earthquake scenarios is necessary; models that have little or no physical basis but have been tested and adjusted to fit available observations can only "predict" what happened in the past, which should be considered description as opposed to prediction. We have developed a methodology for synthesizing physics-based broadband ground motion that incorporates the effects of realistic earthquake rupture along specific faults and the actual geology between the source and site.

Learning to Predict and Control the Physics of Our Movements

PubMed Central

2017-01-01

When we hold an object in our hand, the mass of the object alters the physics of our arm, changing the relationship between motor commands that our brain sends to our arm muscles and the resulting motion of our hand. If the object is unfamiliar to us, our first movement will exhibit an error, producing a trajectory that is different from the one we had intended. This experience of error initiates learning in our brain, making it so that on the very next attempt our motor commands partially compensate for the unfamiliar physics, resulting in smaller errors. With further practice, the compensation becomes more complete, and our brain forms a model that predicts the physics of the object. This model is a motor memory that frees us from having to relearn the physics the next time that we encounter the object. The mechanism by which the brain transforms sensory prediction errors into corrective motor commands is the basis for how we learn the physics of objects with which we interact. The cerebellum and the motor cortex appear to be critical for our ability to learn physics, allowing us to use tools that extend our capabilities, making us masters of our environment. PMID:28202784

Integrating Unified Gravity Wave Physics into the NOAA Next Generation Global Prediction System

NASA Astrophysics Data System (ADS)

Alpert, J. C.; Yudin, V.; Fuller-Rowell, T. J.; Akmaev, R. A.

2017-12-01

The Unified Gravity Wave Physics (UGWP) project for the Next Generation Global Prediction System (NGGPS) is a NOAA collaborative effort between the National Centers for Environmental Prediction (NCEP), Environemntal Modeling Center (EMC) and the University of Colorado, Cooperative Institute for Research in Environmental Sciences (CU-CIRES) to support upgrades and improvements of GW dynamics (resolved scales) and physics (sub-grid scales) in the NOAA Environmental Modeling System (NEMS)†. As envisioned the global climate, weather and space weather models of NEMS will substantially improve their predictions and forecasts with the resolution-sensitive (scale-aware) formulations planned under the UGWP framework for both orographic and non-stationary waves. In particular, the planned improvements for the Global Forecast System (GFS) model of NEMS are: calibration of model physics for higher vertical and horizontal resolution and an extended vertical range of simulations, upgrades to GW schemes, including the turbulent heating and eddy mixing due to wave dissipation and breaking, and representation of the internally-generated QBO. The main priority of the UGWP project is unified parameterization of orographic and non-orographic GW effects including momentum deposition in the middle atmosphere and turbulent heating and eddies due to wave dissipation and breaking. The latter effects are not currently represented in NOAA atmosphere models. The team has tested and evaluated four candidate GW solvers integrating the selected GW schemes into the NGGPS model. Our current work and planned activity is to implement the UGWP schemes in the first available GFS/FV3 (open FV3) configuration including adapted GFDL modification for sub-grid orography in GFS. Initial global model results will be shown for the operational and research GFS configuration for spectral and FV3 dynamical cores. †http://www.emc.ncep.noaa.gov/index.php?branch=NEMS

Motivating Kids in Physical Activity.

ERIC Educational Resources Information Center

Weiss, Maureen R.

2000-01-01

This article adopts a motivational stance in identifying factors that strongly predict physical activity in children. One model for understanding physical activity motivation in children portrays the sources and consequences of self-esteem for physical activity behavior (perceived competency/adequacy, social support, enjoyment, and physical…

Predicting fire frequency with chemistry and climate

Treesearch

Richard P. Guyette; Michael C. Stambaugh; Daniel C. Dey; Rose-Marie Muzika

2012-01-01

A predictive equation for estimating fire frequency was developed from theories and data in physical chemistry, ecosystem ecology, and climatology. We refer to this equation as the Physical Chemistry Fire Frequency Model (PC2FM). The equation was calibrated and validated with North American fire data (170 sites) prior to widespread industrial influences (before ...

Class-Related Emotions in Secondary Physical Education: A Control-Value Theory Approach

ERIC Educational Resources Information Center

Simonton, Kelly L.; Garn, Alex C.; Solmon, Melinda Ann

2017-01-01

Purpose: Grounded in control-value theory, a model of students' achievement emotions in physical education (PE) was investigated. Methods: A path analysis tested hypotheses that students' (N = 529) perceptions of teacher responsiveness, assertiveness, and clarity predict control and value beliefs which, in turn, predict enjoyment and boredom.…

Data Aggregation, Curation and Modeling Approaches to Deliver Prediction Models to Support Computational Toxicology at the EPA (ACS Fall meeting)

EPA Science Inventory

The U.S. Environmental Protection Agency (EPA) Computational Toxicology Program develops and utilizes QSAR modeling approaches across a broad range of applications. In terms of physical chemistry we have a particular interest in the prediction of basic physicochemical parameters ...

Catchments as non-linear filters: evaluating data-driven approaches for spatio-temporal predictions in ungauged basins

NASA Astrophysics Data System (ADS)

Bellugi, D. G.; Tennant, C.; Larsen, L.

2016-12-01

Catchment and climate heterogeneity complicate prediction of runoff across time and space, and resulting parameter uncertainty can lead to large accumulated errors in hydrologic models, particularly in ungauged basins. Recently, data-driven modeling approaches have been shown to avoid the accumulated uncertainty associated with many physically-based models, providing an appealing alternative for hydrologic prediction. However, the effectiveness of different methods in hydrologically and geomorphically distinct catchments, and the robustness of these methods to changing climate and changing hydrologic processes remain to be tested. Here, we evaluate the use of machine learning techniques to predict daily runoff across time and space using only essential climatic forcing (e.g. precipitation, temperature, and potential evapotranspiration) time series as model input. Model training and testing was done using a high quality dataset of daily runoff and climate forcing data for 25+ years for 600+ minimally-disturbed catchments (drainage area range 5-25,000 km2, median size 336 km2) that cover a wide range of climatic and physical characteristics. Preliminary results using Support Vector Regression (SVR) suggest that in some catchments this nonlinear-based regression technique can accurately predict daily runoff, while the same approach fails in other catchments, indicating that the representation of climate inputs and/or catchment filter characteristics in the model structure need further refinement to increase performance. We bolster this analysis by using Sparse Identification of Nonlinear Dynamics (a sparse symbolic regression technique) to uncover the governing equations that describe runoff processes in catchments where SVR performed well and for ones where it performed poorly, thereby enabling inference about governing processes. This provides a robust means of examining how catchment complexity influences runoff prediction skill, and represents a contribution towards the integration of data-driven inference and physically-based models.

A Bayesian network approach for modeling local failure in lung cancer

NASA Astrophysics Data System (ADS)

Oh, Jung Hun; Craft, Jeffrey; Lozi, Rawan Al; Vaidya, Manushka; Meng, Yifan; Deasy, Joseph O.; Bradley, Jeffrey D.; El Naqa, Issam

2011-03-01

Locally advanced non-small cell lung cancer (NSCLC) patients suffer from a high local failure rate following radiotherapy. Despite many efforts to develop new dose-volume models for early detection of tumor local failure, there was no reported significant improvement in their application prospectively. Based on recent studies of biomarker proteins' role in hypoxia and inflammation in predicting tumor response to radiotherapy, we hypothesize that combining physical and biological factors with a suitable framework could improve the overall prediction. To test this hypothesis, we propose a graphical Bayesian network framework for predicting local failure in lung cancer. The proposed approach was tested using two different datasets of locally advanced NSCLC patients treated with radiotherapy. The first dataset was collected retrospectively, which comprises clinical and dosimetric variables only. The second dataset was collected prospectively in which in addition to clinical and dosimetric information, blood was drawn from the patients at various time points to extract candidate biomarkers as well. Our preliminary results show that the proposed method can be used as an efficient method to develop predictive models of local failure in these patients and to interpret relationships among the different variables in the models. We also demonstrate the potential use of heterogeneous physical and biological variables to improve the model prediction. With the first dataset, we achieved better performance compared with competing Bayesian-based classifiers. With the second dataset, the combined model had a slightly higher performance compared to individual physical and biological models, with the biological variables making the largest contribution. Our preliminary results highlight the potential of the proposed integrated approach for predicting post-radiotherapy local failure in NSCLC patients.

Elongated Tetrakaidecahedron Micromechanics Model for Space Shuttle External Tank Foams

NASA Technical Reports Server (NTRS)

Sullivan, Roy M.; Ghosn, Louis J.; Lerch, Bradley A.; Baker, Eric H.

2009-01-01

The results of microstructural characterization studies and physical and mechanical testing of BX-265 and NCFI24-124 foams are reported. A micromechanics model developed previously by the authors is reviewed, and the resulting equations for the elastic constants, the relative density, and the strength of the foam in the principal material directions are presented. The micromechanics model is also used to derive equations to predict the effect of vacuum on the tensile strength and the strains induced by exposure to vacuum. Using a combination of microstructural dimensions and physical and mechanical measurements as input, the equations for the elastic constants and the relative density are applied and the remaining microstructural dimensions are predicted. The predicted microstructural dimensions are in close agreement with the average measured values for both BX-265 and NCFI24-124. With the microstructural dimensions, the model predicts the ratio of the strengths in the principal material directions for both foams. The model is also used to predict the Poisson s ratios, the vacuum-induced strains, and the effect of vacuum on the tensile strengths. However, the comparison of these predicted values with the measured values is not as favorable.

Experimental studies of electroweak physics

DOE Office of Scientific and Technical Information (OSTI.GOV)

Etzion, E.

1997-09-01

Some experimental new Electroweak physics results measured at the LEP/SLD and the TEVATRON are discussed. The excellent accuracy achieved by the experiments still yield no significant evidence for deviation from the Standard Model predictions, or signal to physics beyond the Standard Model. The Higgs particle still has not been discovered and a low bound is given to its mass.

The Trans-Contextual Model of Autonomous Motivation in Education: Conceptual and Empirical Issues and Meta-Analysis

ERIC Educational Resources Information Center

Hagger, Martin S.; Chatzisarantis, Nikos L. D.

2016-01-01

The trans-contextual model outlines the processes by which autonomous motivation toward activities in a physical education context predicts autonomous motivation toward physical activity outside of school, and beliefs about, intentions toward, and actual engagement in, out-of-school physical activity. In the present article, we clarify the…

Next Generation Community Based Unified Global Modeling System Development and Operational Implementation Strategies at NCEP

NASA Astrophysics Data System (ADS)

Tallapragada, V.

2017-12-01

NOAA's Next Generation Global Prediction System (NGGPS) has provided the unique opportunity to develop and implement a non-hydrostatic global model based on Geophysical Fluid Dynamics Laboratory (GFDL) Finite Volume Cubed Sphere (FV3) Dynamic Core at National Centers for Environmental Prediction (NCEP), making a leap-step advancement in seamless prediction capabilities across all spatial and temporal scales. Model development efforts are centralized with unified model development in the NOAA Environmental Modeling System (NEMS) infrastructure based on Earth System Modeling Framework (ESMF). A more sophisticated coupling among various earth system components is being enabled within NEMS following National Unified Operational Prediction Capability (NUOPC) standards. The eventual goal of unifying global and regional models will enable operational global models operating at convective resolving scales. Apart from the advanced non-hydrostatic dynamic core and coupling to various earth system components, advanced physics and data assimilation techniques are essential for improved forecast skill. NGGPS is spearheading ambitious physics and data assimilation strategies, concentrating on creation of a Common Community Physics Package (CCPP) and Joint Effort for Data Assimilation Integration (JEDI). Both initiatives are expected to be community developed, with emphasis on research transitioning to operations (R2O). The unified modeling system is being built to support the needs of both operations and research. Different layers of community partners are also established with specific roles/responsibilities for researchers, core development partners, trusted super-users, and operations. Stakeholders are engaged at all stages to help drive the direction of development, resources allocations and prioritization. This talk presents the current and future plans of unified model development at NCEP for weather, sub-seasonal, and seasonal climate prediction applications with special emphasis on implementation of NCEP FV3 Global Forecast System (GFS) and Global Ensemble Forecast System (GEFS) into operations by 2019.

Predicting the performance uncertainty of a 1-MW pilot-scale carbon capture system after hierarchical laboratory-scale calibration and validation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Xu, Zhijie; Lai, Canhai; Marcy, Peter William

2017-05-01

A challenging problem in designing pilot-scale carbon capture systems is to predict, with uncertainty, the adsorber performance and capture efficiency under various operating conditions where no direct experimental data exist. Motivated by this challenge, we previously proposed a hierarchical framework in which relevant parameters of physical models were sequentially calibrated from different laboratory-scale carbon capture unit (C2U) experiments. Specifically, three models of increasing complexity were identified based on the fundamental physical and chemical processes of the sorbent-based carbon capture technology. Results from the corresponding laboratory experiments were used to statistically calibrate the physical model parameters while quantifying some of theirmore » inherent uncertainty. The parameter distributions obtained from laboratory-scale C2U calibration runs are used in this study to facilitate prediction at a larger scale where no corresponding experimental results are available. In this paper, we first describe the multiphase reactive flow model for a sorbent-based 1-MW carbon capture system then analyze results from an ensemble of simulations with the upscaled model. The simulation results are used to quantify uncertainty regarding the design’s predicted efficiency in carbon capture. In particular, we determine the minimum gas flow rate necessary to achieve 90% capture efficiency with 95% confidence.« less

Standard solar model. II - g-modes

NASA Technical Reports Server (NTRS)

Guenther, D. B.; Demarque, P.; Pinsonneault, M. H.; Kim, Y.-C.

1992-01-01

The paper presents the g-mode oscillation for a set of modern solar models. Each solar model is based on a single modification or improvement to the physics of a reference solar model. Improvements were made to the nuclear reaction rates, the equation of state, the opacities, and the treatment of the atmosphere. The error in the predicted g-mode periods associated with the uncertainties in the model physics is predicted and the specific sensitivities of the g-mode periods and their period spacings to the different model structures are described. In addition, these models are compared to a sample of published observations. A remarkably good agreement is found between the 'best' solar model and the observations of Hill and Gu (1990).

Moving beyond "sticks and stones": chronic psychological trauma predicts posttraumatic stress symptoms.

PubMed

Jeter, Whitney K; Brannon, Laura A

2014-01-01

To date, trauma research has focused on the impact of physical trauma on posttraumatic stress (PTS) symptoms. Sometimes psychological trauma is measured with instances of physical trauma; however, less is known about solely psychological trauma. The current study addresses this by examining psychological trauma and PTS symptoms using the chronic relational trauma (CRT) model. The CRT model examines physical and possible concurrent psychological childhood, peer, and intimate partner trauma; however, psychological trauma alone has yet to be tested. A total of 232 female undergraduates (M age = 18.32, SD = 1.60) completed a series of questionnaires. Structural equation modeling indicated that childhood, peer, and intimate partner psychological trauma predict current PTS symptoms. Contributions of these findings are discussed.

SF-FDTD analysis of a predictive physical model for parallel aligned liquid crystal devices

NASA Astrophysics Data System (ADS)

Márquez, Andrés.; Francés, Jorge; Martínez, Francisco J.; Gallego, Sergi; Alvarez, Mariela L.; Calzado, Eva M.; Pascual, Inmaculada; Beléndez, Augusto

2017-08-01

Recently we demonstrated a novel and simplified model enabling to calculate the voltage dependent retardance provided by parallel aligned liquid crystal devices (PA-LCoS) for a very wide range of incidence angles and any wavelength in the visible. To our knowledge it represents the most simplified approach still showing predictive capability. Deeper insight into the physics behind the simplified model is necessary to understand if the parameters in the model are physically meaningful. Since the PA-LCoS is a black-box where we do not have information about the physical parameters of the device, we cannot perform this kind of analysis using the experimental retardance measurements. In this work we develop realistic simulations for the non-linear tilt of the liquid crystal director across the thickness of the liquid crystal layer in the PA devices. We consider these profiles to have a sine-like shape, which is a good approximation for typical ranges of applied voltage in commercial PA-LCoS microdisplays. For these simulations we develop a rigorous method based on the split-field finite difference time domain (SF-FDTD) technique which provides realistic retardance values. These values are used as the experimental measurements to which the simplified model is fitted. From this analysis we learn that the simplified model is very robust, providing unambiguous solutions when fitting its parameters. We also learn that two of the parameters in the model are physically meaningful, proving a useful reverse-engineering approach, with predictive capability, to probe into internal characteristics of the PA-LCoS device.

Physical controls and predictability of stream hyporheic flow evaluated with a multiscale model

USGS Publications Warehouse

Stonedahl, Susa H.; Harvey, Judson W.; Detty, Joel; Aubeneau, Antoine; Packman, Aaron I.

2012-01-01

Improved predictions of hyporheic exchange based on easily measured physical variables are needed to improve assessment of solute transport and reaction processes in watersheds. Here we compare physically based model predictions for an Indiana stream with stream tracer results interpreted using the Transient Storage Model (TSM). We parameterized the physically based, Multiscale Model (MSM) of stream-groundwater interactions with measured stream planform and discharge, stream velocity, streambed hydraulic conductivity and porosity, and topography of the streambed at distinct spatial scales (i.e., ripple, bar, and reach scales). We predicted hyporheic exchange fluxes and hyporheic residence times using the MSM. A Continuous Time Random Walk (CTRW) model was used to convert the MSM output into predictions of in stream solute transport, which we compared with field observations and TSM parameters obtained by fitting solute transport data. MSM simulations indicated that surface-subsurface exchange through smaller topographic features such as ripples was much faster than exchange through larger topographic features such as bars. However, hyporheic exchange varies nonlinearly with groundwater discharge owing to interactions between flows induced at different topographic scales. MSM simulations showed that groundwater discharge significantly decreased both the volume of water entering the subsurface and the time it spent in the subsurface. The MSM also characterized longer timescales of exchange than were observed by the tracer-injection approach. The tracer data, and corresponding TSM fits, were limited by tracer measurement sensitivity and uncertainty in estimates of background tracer concentrations. Our results indicate that rates and patterns of hyporheic exchange are strongly influenced by a continuum of surface-subsurface hydrologic interactions over a wide range of spatial and temporal scales rather than discrete processes.

Preduction of Vehicle Mobility on Large-Scale Soft-Soil Terrain Maps Using Physics-Based Simulation

DTIC Science & Technology

2016-08-02

PREDICTION OF VEHICLE MOBILITY ON LARGE-SCALE SOFT- SOIL TERRAIN MAPS USING PHYSICS-BASED SIMULATION Tamer M. Wasfy, Paramsothy Jayakumar, Dave...NRMM • Objectives • Soft Soils • Review of Physics-Based Soil Models • MBD/DEM Modeling Formulation – Joint & Contact Constraints – DEM Cohesive... Soil Model • Cone Penetrometer Experiment • Vehicle- Soil Model • Vehicle Mobility DOE Procedure • Simulation Results • Concluding Remarks 2UNCLASSIFIED

Changes at work and employee reactions: organizational elements, job insecurity, and short-term stress as predictors for employee health and safety.

PubMed

Størseth, Fred

2006-12-01

The objective was to identify focus areas for possible reduction of job insecurity and its outcomes. A model was specified and tested as a prediction model for health and safety. First, a parsimonious model was specified. The model consisted of perceived job insecurity (as a stressor), organizational factors (information quality, leadership style, work task administration), and short-term stress reactions (job dissatisfaction, reduced work motivation). Second, the model was tested as a prediction model in three separate path analyses, in order to examine the model's contribution in explaining (1) physical health complaints, (2) mental health complaints, and (3) risk taking behavior. A quota sample of Norwegian employees (N= 1,002) was obtained by means of a self-completion questionnaire survey. The results of the structural equation modeling (path analyses) supported the hypothesized model. Mental health complaints and employee risk taking behavior were significantly predicted (not physical health complaints).

Prediction equation for estimating total daily energy requirements of special operations personnel.

PubMed

Barringer, N D; Pasiakos, S M; McClung, H L; Crombie, A P; Margolis, L M

2018-01-01

Special Operations Forces (SOF) engage in a variety of military tasks with many producing high energy expenditures, leading to undesired energy deficits and loss of body mass. Therefore, the ability to accurately estimate daily energy requirements would be useful for accurate logistical planning. Generate a predictive equation estimating energy requirements of SOF. Retrospective analysis of data collected from SOF personnel engaged in 12 different SOF training scenarios. Energy expenditure and total body water were determined using the doubly-labeled water technique. Physical activity level was determined as daily energy expenditure divided by resting metabolic rate. Physical activity level was broken into quartiles (0 = mission prep, 1 = common warrior tasks, 2 = battle drills, 3 = specialized intense activity) to generate a physical activity factor (PAF). Regression analysis was used to construct two predictive equations (Model A; body mass and PAF, Model B; fat-free mass and PAF) estimating daily energy expenditures. Average measured energy expenditure during SOF training was 4468 (range: 3700 to 6300) Kcal·d- 1 . Regression analysis revealed that physical activity level ( r  = 0.91; P  < 0.05) and body mass ( r  = 0.28; P  < 0.05; Model A), or fat-free mass (FFM; r  = 0.32; P  < 0.05; Model B) were the factors that most highly predicted energy expenditures. Predictive equations coupling PAF with body mass (Model A) and FFM (Model B), were correlated ( r  = 0.74 and r  = 0.76, respectively) and did not differ [mean ± SEM: Model A; 4463 ± 65 Kcal·d - 1 , Model B; 4462 ± 61 Kcal·d - 1 ] from DLW measured energy expenditures. By quantifying and grouping SOF training exercises into activity factors, SOF energy requirements can be predicted with reasonable accuracy and these equations used by dietetic/logistical personnel to plan appropriate feeding regimens to meet SOF nutritional requirements across their mission profile.

CALCULATING PHYSICAL PROPERTIES OF ORGANIC COMPOUNDS FOR ENVIRONMENTAL MODELING FROM MOLECULAR STRUCTURE

EPA Science Inventory

Mathematical models for predicting the transport and fate of pollutants in the environment require reactivity parameter values-- that is value of the physical and chemical constants that govern reactivity. Although empirical structure activity relationships have been developed t...

Blind test of physics-based prediction of protein structures.

PubMed

Shell, M Scott; Ozkan, S Banu; Voelz, Vincent; Wu, Guohong Albert; Dill, Ken A

2009-02-01

We report here a multiprotein blind test of a computer method to predict native protein structures based solely on an all-atom physics-based force field. We use the AMBER 96 potential function with an implicit (GB/SA) model of solvation, combined with replica-exchange molecular-dynamics simulations. Coarse conformational sampling is performed using the zipping and assembly method (ZAM), an approach that is designed to mimic the putative physical routes of protein folding. ZAM was applied to the folding of six proteins, from 76 to 112 monomers in length, in CASP7, a community-wide blind test of protein structure prediction. Because these predictions have about the same level of accuracy as typical bioinformatics methods, and do not utilize information from databases of known native structures, this work opens up the possibility of predicting the structures of membrane proteins, synthetic peptides, or other foldable polymers, for which there is little prior knowledge of native structures. This approach may also be useful for predicting physical protein folding routes, non-native conformations, and other physical properties from amino acid sequences.

Blind Test of Physics-Based Prediction of Protein Structures

PubMed Central

Shell, M. Scott; Ozkan, S. Banu; Voelz, Vincent; Wu, Guohong Albert; Dill, Ken A.

2009-01-01

We report here a multiprotein blind test of a computer method to predict native protein structures based solely on an all-atom physics-based force field. We use the AMBER 96 potential function with an implicit (GB/SA) model of solvation, combined with replica-exchange molecular-dynamics simulations. Coarse conformational sampling is performed using the zipping and assembly method (ZAM), an approach that is designed to mimic the putative physical routes of protein folding. ZAM was applied to the folding of six proteins, from 76 to 112 monomers in length, in CASP7, a community-wide blind test of protein structure prediction. Because these predictions have about the same level of accuracy as typical bioinformatics methods, and do not utilize information from databases of known native structures, this work opens up the possibility of predicting the structures of membrane proteins, synthetic peptides, or other foldable polymers, for which there is little prior knowledge of native structures. This approach may also be useful for predicting physical protein folding routes, non-native conformations, and other physical properties from amino acid sequences. PMID:19186130

Special Issue on Uncertainty Quantification in Multiscale System Design and Simulation

DOE PAGES

Wang, Yan; Swiler, Laura

2017-09-07

The importance of uncertainty has been recognized in various modeling, simulation, and analysis applications, where inherent assumptions and simplifications affect the accuracy of model predictions for physical phenomena. As model predictions are now heavily relied upon for simulation-based system design, which includes new materials, vehicles, mechanical and civil structures, and even new drugs, wrong model predictions could potentially cause catastrophic consequences. Therefore, uncertainty and associated risks due to model errors should be quantified to support robust systems engineering.

Special Issue on Uncertainty Quantification in Multiscale System Design and Simulation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wang, Yan; Swiler, Laura

The importance of uncertainty has been recognized in various modeling, simulation, and analysis applications, where inherent assumptions and simplifications affect the accuracy of model predictions for physical phenomena. As model predictions are now heavily relied upon for simulation-based system design, which includes new materials, vehicles, mechanical and civil structures, and even new drugs, wrong model predictions could potentially cause catastrophic consequences. Therefore, uncertainty and associated risks due to model errors should be quantified to support robust systems engineering.

Lumped Parameter Models for Predicting Nitrogen Transport in Lower Coastal Plain Watersheds

Treesearch

Devendra M. Amatya; George M. Chescheir; Glen P. Fernandez; R. Wayne Skaggs; F. Birgand; J.W. Gilliam

2003-01-01

hl recent years physically based comprehensive disfributed watershed scale hydrologic/water quality models have been developed and applied 10 evaluate cumulative effects of land arld water management practices on receiving waters, Although fhesc complex physically based models are capable of simulating the impacts ofthese changes in large watersheds, they are often...

Importance of physical and hydraulic characteristics to unionid mussels: A retrospective analysis in a reach of large river

USGS Publications Warehouse

Zigler, S.J.; Newton, T.J.; Steuer, J.J.; Bartsch, M.R.; Sauer, J.S.

2008-01-01

Interest in understanding physical and hydraulic factors that might drive distribution and abundance of freshwater mussels has been increasing due to their decline throughout North America. We assessed whether the spatial distribution of unionid mussels could be predicted from physical and hydraulic variables in a reach of the Upper Mississippi River. Classification and regression tree (CART) models were constructed using mussel data compiled from various sources and explanatory variables derived from GIS coverages. Prediction success of CART models for presence-absence of mussels ranged from 71 to 76% across three gears (brail, sled-dredge, and dive-quadrat) and 51% of the deviance in abundance. Models were largely driven by shear stress and substrate stability variables, but interactions with simple physical variables, especially slope, were also important. Geospatial models, which were based on tree model results, predicted few mussels in poorly connected backwater areas (e.g., floodplain lakes) and the navigation channel, whereas main channel border areas with high geomorphic complexity (e.g., river bends, islands, side channel entrances) and small side channels were typically favorable to mussels. Moreover, bootstrap aggregation of discharge-specific regression tree models of dive-quadrat data indicated that variables measured at low discharge were about 25% more predictive (PMSE = 14.8) than variables measured at median discharge (PMSE = 20.4) with high discharge (PMSE = 17.1) variables intermediate. This result suggests that episodic events such as droughts and floods were important in structuring mussel distributions. Although the substantial mussel and ancillary data in our study reach is unusual, our approach to develop exploratory statistical and geospatial models should be useful even when data are more limited. ?? 2007 Springer Science+Business Media B.V.

Parameterized reduced-order models using hyper-dual numbers.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fike, Jeffrey A.; Brake, Matthew Robert

2013-10-01

The goal of most computational simulations is to accurately predict the behavior of a real, physical system. Accurate predictions often require very computationally expensive analyses and so reduced order models (ROMs) are commonly used. ROMs aim to reduce the computational cost of the simulations while still providing accurate results by including all of the salient physics of the real system in the ROM. However, real, physical systems often deviate from the idealized models used in simulations due to variations in manufacturing or other factors. One approach to this issue is to create a parameterized model in order to characterize themore » effect of perturbations from the nominal model on the behavior of the system. This report presents a methodology for developing parameterized ROMs, which is based on Craig-Bampton component mode synthesis and the use of hyper-dual numbers to calculate the derivatives necessary for the parameterization.« less

Development of Predictive Models of Injury for the Lower Extremity, Lumbar, and Thoracic Spine after Discharge from Physical Rehabilitation

DTIC Science & Technology

2016-10-01

prediction models will vary by age and sex . Hypothesis 3: A multi-factorial prediction model that accurately predicts risk of new and recurring injuries...members for injury risk after they have been cleared to return to duty from an injury is of great importance. The purpose of this project is to determine ...It turns out that many patients are not formally discharged from rehabilitation. Many of them “ self -discharge” and just stop coming back, either

Predicting nonstationary flood frequencies: Evidence supports an updated stationarity thesis in the United States

NASA Astrophysics Data System (ADS)

Luke, Adam; Vrugt, Jasper A.; AghaKouchak, Amir; Matthew, Richard; Sanders, Brett F.

2017-07-01

Nonstationary extreme value analysis (NEVA) can improve the statistical representation of observed flood peak distributions compared to stationary (ST) analysis, but management of flood risk relies on predictions of out-of-sample distributions for which NEVA has not been comprehensively evaluated. In this study, we apply split-sample testing to 1250 annual maximum discharge records in the United States and compare the predictive capabilities of NEVA relative to ST extreme value analysis using a log-Pearson Type III (LPIII) distribution. The parameters of the LPIII distribution in the ST and nonstationary (NS) models are estimated from the first half of each record using Bayesian inference. The second half of each record is reserved to evaluate the predictions under the ST and NS models. The NS model is applied for prediction by (1) extrapolating the trend of the NS model parameters throughout the evaluation period and (2) using the NS model parameter values at the end of the fitting period to predict with an updated ST model (uST). Our analysis shows that the ST predictions are preferred, overall. NS model parameter extrapolation is rarely preferred. However, if fitting period discharges are influenced by physical changes in the watershed, for example from anthropogenic activity, the uST model is strongly preferred relative to ST and NS predictions. The uST model is therefore recommended for evaluation of current flood risk in watersheds that have undergone physical changes. Supporting information includes a MATLAB® program that estimates the (ST/NS/uST) LPIII parameters from annual peak discharge data through Bayesian inference.

Examination of multi-model ensemble seasonal prediction methods using a simple climate system

NASA Astrophysics Data System (ADS)

Kang, In-Sik; Yoo, Jin Ho

2006-02-01

A simple climate model was designed as a proxy for the real climate system, and a number of prediction models were generated by slightly perturbing the physical parameters of the simple model. A set of long (240 years) historical hindcast predictions were performed with various prediction models, which are used to examine various issues of multi-model ensemble seasonal prediction, such as the best ways of blending multi-models and the selection of models. Based on these results, we suggest a feasible way of maximizing the benefit of using multi models in seasonal prediction. In particular, three types of multi-model ensemble prediction systems, i.e., the simple composite, superensemble, and the composite after statistically correcting individual predictions (corrected composite), are examined and compared to each other. The superensemble has more of an overfitting problem than the others, especially for the case of small training samples and/or weak external forcing, and the corrected composite produces the best prediction skill among the multi-model systems.

Model Independent Search For New Physics At The Tevatron

DOE Office of Scientific and Technical Information (OSTI.GOV)

Choudalakis, Georgios

2008-04-01

The Standard Model of elementary particles can not be the final theory. There are theoretical reasons to expect the appearance of new physics, possibly at the energy scale of few TeV. Several possible theories of new physics have been proposed, each with unknown probability to be confirmed. Instead of arbitrarily choosing to examine one of those theories, this thesis is about searching for any sign of new physics in a model-independent way. This search is performed at the Collider Detector at Fermilab (CDF). The Standard Model prediction is implemented in all final states simultaneously, and an array of statistical probesmore » is employed to search for significant discrepancies between data and prediction. The probes are sensitive to overall population discrepancies, shape disagreements in distributions of kinematic quantities of final particles, excesses of events of large total transverse momentum, and local excesses of data expected from resonances due to new massive particles. The result of this search, first in 1 fb -1 and then in 2 fb -1, is null, namely no considerable evidence of new physics was found.« less

Pilot Wave Model for Impulsive Thrust from RF Test Device Measured in Vacuum

NASA Technical Reports Server (NTRS)

White, Harold; Lawrence, James; Sylvester, Andre; Vera, Jerry; Chap, Andrew; George, Jeff

2017-01-01

A physics model is developed in detail and its place in the taxonomy of ideas about the nature of the quantum vacuum is discussed. The experimental results from the recently completed vacuum test campaign evaluating the impulsive thrust performance of a tapered RF test article excited in the TM212 mode at 1,937 megahertz (MHz) are summarized. The empirical data from this campaign is compared to the predictions from the physics model tools. A discussion is provided to further elaborate on the possible implications of the proposed model if it is physically valid. Based on the correlation of analysis prediction with experimental data collected, it is proposed that the observed anomalous thrust forces are real, not due to experimental error, and are due to a new type of interaction with quantum vacuum fluctuations.

Simulation of Atmospheric-Entry Capsules in the Subsonic Regime

NASA Technical Reports Server (NTRS)

Murman, Scott M.; Childs, Robert E.; Garcia, Joseph A.

2015-01-01

The accuracy of Computational Fluid Dynamics predictions of subsonic capsule aerodynamics is examined by comparison against recent NASA wind-tunnel data at high-Reynolds-number flight conditions. Several aspects of numerical and physical modeling are considered, including inviscid numerical scheme, mesh adaptation, rough-wall modeling, rotation and curvature corrections for eddy-viscosity models, and Detached-Eddy Simulations of the unsteady wake. All of these are considered in isolation against relevant data where possible. The results indicate that an improved predictive capability is developed by considering physics-based approaches and validating the results against flight-relevant experimental data.

Surface temperature distribution of GTA weld pools on thin-plate 304 stainless steel

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zacharia, T.; David, S.A.; Vitek, J.M.

1995-11-01

A transient multidimensional computational model was utilized to study gas tungsten arc (GTA) welding of thin-plate 304 stainless steel (SS). The model eliminates several of the earlier restrictive assumptions including temperature-independent thermal-physical properties. Consequently, all important thermal-physical properties were considered as temperature dependent throughout the range of temperatures experienced by the weld metal. The computational model was used to predict surface temperature distribution of the GTA weld pools in 1.5-mm-thick AISI 304 SS. The welding parameters were chosen so as to correspond with an earlier experimental study that produced high-resolution surface temperature maps. One of the motivations of the presentmore » study was to verify the predictive capability of the computational model. Comparison of the numerical predictions and experimental observations indicate excellent agreement, thereby verifying the model.« less

Testing Bayesian and heuristic predictions of mass judgments of colliding objects

PubMed Central

Sanborn, Adam N.

2014-01-01

Mass judgments of colliding objects have been used to explore people's understanding of the physical world because they are ecologically relevant, yet people display biases that are most easily explained by a small set of heuristics. Recent work has challenged the heuristic explanation, by producing the same biases from a model that copes with perceptual uncertainty by using Bayesian inference with a prior based on the correct combination rules from Newtonian mechanics (noisy Newton). Here I test the predictions of the leading heuristic model (Gilden and Proffitt, 1989) against the noisy Newton model using a novel manipulation of the standard mass judgment task: making one of the objects invisible post-collision. The noisy Newton model uses the remaining information to predict above-chance performance, while the leading heuristic model predicts chance performance when one or the other final velocity is occluded. An experiment using two different types of occlusion showed better-than-chance performance and response patterns that followed the predictions of the noisy Newton model. The results demonstrate that people can make sensible physical judgments even when information critical for the judgment is missing, and that a Bayesian model can serve as a guide in these situations. Possible algorithmic-level accounts of this task that more closely correspond to the noisy Newton model are explored. PMID:25206345

Searching for a relevant definition of sarcopenia: results from the cross-sectional EPIDOS study

PubMed Central

Dupuy, Charlotte; Lauwers-Cances, Valérie; Guyonnet, Sophie; Gentil, Catherine; Abellan Van Kan, Gabor; Beauchet, Olivier; Schott, Anne-Marie; Vellas, Bruno; Rolland, Yves

2015-01-01

Background The diversity of definitions proposed for sarcopenia has been rarely tested in the same population, and so far, their clinical utilities for predicting physical difficulties could not be clearly understood. Our objective is to report the prevalence of sarcopenia and the characteristics of sarcopenic community-dwelling older women according to the different definitions of sarcopenia currently proposed. We also assessed these definitions for their incremental predictive value over currently standard predictors for some self-reported difficulties in physical function and knee extension strength. Methods Cross-sectional analysis included data from 3025 non-disabled women aged 75 years or older without previous history of hip fracture from the inclusion visit of the EPIDémiologie de l'OStéoporose study. A total body composition evaluation was available for 2725 women. Sarcopenia was defined using six different definitions of sarcopenia based on different muscle mass, gait speed, and grip strength cut-offs. Self-reported difficulties in physical function and knee extension strength were collected. Logistic regression and multiple linear regression models were built for each physical dysfunction, and the predictive capacity of sarcopenia (one model for each definition) was studied using the C-statistic, the net reclassification index, or adjusted R2. Results The estimated prevalence of sarcopenia ranged from 3.3–20.0%. Only 85 participants (3.1%) were identified having sarcopenia according to all definitions. All definitions were, to some degree, associated with self-reported difficulties in physical function and knee extension strength, but none improved the predictive ability of the self-reported difficulties in physical function. Conversely, all definitions accounted for a small but significant amount of explained variation for predicting knee extension strength. Conclusions Prevalence of sarcopenia varies widely depending on the definition adopted. Based on this research, the current definitions for sarcopenia does not substantially increment the predictive value of clinical characteristics of patients to predict self-reported physical difficulties and knee extension strength. PMID:26136190

Computational Modeling of Hydrodynamics and Scour around Underwater Munitions

NASA Astrophysics Data System (ADS)

Liu, X.; Xu, Y.

2017-12-01

Munitions deposited in water bodies are a big threat to human health, safety, and environment. It is thus imperative to predict the motion and the resting status of the underwater munitions. A multitude of physical processes are involved, which include turbulent flows, sediment transport, granular material mechanics, 6 degree-of-freedom motion of the munition, and potential liquefaction. A clear understanding of this unique physical setting is currently lacking. Consequently, it is extremely hard to make reliable predictions. In this work, we present the computational modeling of two importance processes, i.e., hydrodynamics and scour, around munition objects. Other physical processes are also considered in our comprehensive model. However, they are not shown in this talk. To properly model the dynamics of the deforming bed and the motion of the object, an immersed boundary method is implemented in the open source CFD package OpenFOAM. Fixed bed and scour cases are simulated and compared with laboratory experiments. The future work of this project will implement the coupling between all the physical processes.

Analogical scaffolding: Making meaning in physics through representation and analogy

NASA Astrophysics Data System (ADS)

Podolefsky, Noah Solomon

This work reviews the literature on analogy, introduces a new model of analogy, and presents a series of experiments that test and confirm the utility of this model to describe and predict student learning in physics with analogy. Pilot studies demonstrate that representations (e.g., diagrams) can play a key role in students' use of analogy. A new model of analogy, Analogical Scaffolding, is developed to explain these initial empirical results. This model will be described in detail, and then applied to describe and predict the outcomes of further experiments. Two large-scale (N>100) studies will demonstrate that: (1) students taught with analogies, according to the Analogical Scaffolding model, outperform students taught without analogies on pre-post assessments focused on electromagnetic waves; (2) the representational forms used to teach with analogy can play a significant role in student learning, with students in one treatment group outperforming students in other treatment groups by factors of two or three. It will be demonstrated that Analogical Scaffolding can be used to predict these results, as well as finer-grained results such as the types of distracters students choose in different treatment groups, and to describe and analyze student reasoning in interviews. Abstraction in physics is reconsidered using Analogical Scaffolding. An operational definition of abstraction is developed within the Analogical Scaffolding framework and employed to explain (a) why physicists consider some ideas more abstract than others in physics, and (b) how students conceptions of these ideas can be modeled. This new approach to abstraction suggests novel approaches to curriculum design in physics using Analogical Scaffolding.

A physical-based gas-surface interaction model for rarefied gas flow simulation

NASA Astrophysics Data System (ADS)

Liang, Tengfei; Li, Qi; Ye, Wenjing

2018-01-01

Empirical gas-surface interaction models, such as the Maxwell model and the Cercignani-Lampis model, are widely used as the boundary condition in rarefied gas flow simulations. The accuracy of these models in the prediction of macroscopic behavior of rarefied gas flows is less satisfactory in some cases especially the highly non-equilibrium ones. Molecular dynamics simulation can accurately resolve the gas-surface interaction process at atomic scale, and hence can predict accurate macroscopic behavior. They are however too computationally expensive to be applied in real problems. In this work, a statistical physical-based gas-surface interaction model, which complies with the basic relations of boundary condition, is developed based on the framework of the washboard model. In virtue of its physical basis, this new model is capable of capturing some important relations/trends for which the classic empirical models fail to model correctly. As such, the new model is much more accurate than the classic models, and in the meantime is more efficient than MD simulations. Therefore, it can serve as a more accurate and efficient boundary condition for rarefied gas flow simulations.

Student Use of Physics to Make Sense of Incomplete but Functional VPython Programs in a Lab Setting

NASA Astrophysics Data System (ADS)

Weatherford, Shawn A.

2011-12-01

Computational activities in Matter & Interactions, an introductory calculus-based physics course, have the instructional goal of providing students with the experience of applying the same set of a small number of fundamental principles to model a wide range of physical systems. However there are significant instructional challenges for students to build computer programs under limited time constraints, especially for students who are unfamiliar with programming languages and concepts. Prior attempts at designing effective computational activities were successful at having students ultimately build working VPython programs under the tutelage of experienced teaching assistants in a studio lab setting. A pilot study revealed that students who completed these computational activities had significant difficultly repeating the exact same tasks and further, had difficulty predicting the animation that would be produced by the example program after interpreting the program code. This study explores the interpretation and prediction tasks as part of an instructional sequence where students are asked to read and comprehend a functional, but incomplete program. Rather than asking students to begin their computational tasks with modifying program code, we explicitly ask students to interpret an existing program that is missing key lines of code. The missing lines of code correspond to the algebraic form of fundamental physics principles or the calculation of forces which would exist between analogous physical objects in the natural world. Students are then asked to draw a prediction of what they would see in the simulation produced by the VPython program and ultimately run the program to evaluate the students' prediction. This study specifically looks at how the participants use physics while interpreting the program code and creating a whiteboard prediction. This study also examines how students evaluate their understanding of the program and modification goals at the beginning of the modification task. While working in groups over the course of a semester, study participants were recorded while they completed three activities using these incomplete programs. Analysis of the video data showed that study participants had little difficulty interpreting physics quantities, generating a prediction, or determining how to modify the incomplete program. Participants did not base their prediction solely from the information from the incomplete program. When participants tried to predict the motion of the objects in the simulation, many turned to their knowledge of how the system would evolve if it represented an analogous real-world physical system. For example, participants attributed the real-world behavior of springs to helix objects even though the program did not include calculations for the spring to exert a force when stretched. Participants rarely interpreted lines of code in the computational loop during the first computational activity, but this changed during latter computational activities with most participants using their physics knowledge to interpret the computational loop. Computational activities in the Matter & Interactions curriculum were revised in light of these findings to include an instructional sequence of tasks to build a comprehension of the example program. The modified activities also ask students to create an additional whiteboard prediction for the time-evolution of the real-world phenomena which the example program will eventually model. This thesis shows how comprehension tasks identified by Palinscar and Brown (1984) as effective in improving reading comprehension are also effective in helping students apply their physics knowledge to interpret a computer program which attempts to model a real-world phenomena and identify errors in their understanding of the use, or omission, of fundamental physics principles in a computational model.

3D Printed Organ Models with Physical Properties of Tissue and Integrated Sensors.

PubMed

Qiu, Kaiyan; Zhao, Zichen; Haghiashtiani, Ghazaleh; Guo, Shuang-Zhuang; He, Mingyu; Su, Ruitao; Zhu, Zhijie; Bhuiyan, Didarul B; Murugan, Paari; Meng, Fanben; Park, Sung Hyun; Chu, Chih-Chang; Ogle, Brenda M; Saltzman, Daniel A; Konety, Badrinath R; Sweet, Robert M; McAlpine, Michael C

2018-03-01

The design and development of novel methodologies and customized materials to fabricate patient-specific 3D printed organ models with integrated sensing capabilities could yield advances in smart surgical aids for preoperative planning and rehearsal. Here, we demonstrate 3D printed prostate models with physical properties of tissue and integrated soft electronic sensors using custom-formulated polymeric inks. The models show high quantitative fidelity in static and dynamic mechanical properties, optical characteristics, and anatomical geometries to patient tissues and organs. The models offer tissue-mimicking tactile sensation and behavior and thus can be used for the prediction of organ physical behavior under deformation. The prediction results show good agreement with values obtained from simulations. The models also allow the application of surgical and diagnostic tools to their surface and inner channels. Finally, via the conformal integration of 3D printed soft electronic sensors, pressure applied to the models with surgical tools can be quantitatively measured.

A novel phenomenological multi-physics model of Li-ion battery cells

NASA Astrophysics Data System (ADS)

Oh, Ki-Yong; Samad, Nassim A.; Kim, Youngki; Siegel, Jason B.; Stefanopoulou, Anna G.; Epureanu, Bogdan I.

2016-09-01

A novel phenomenological multi-physics model of Lithium-ion battery cells is developed for control and state estimation purposes. The model can capture electrical, thermal, and mechanical behaviors of battery cells under constrained conditions, e.g., battery pack conditions. Specifically, the proposed model predicts the core and surface temperatures and reaction force induced from the volume change of battery cells because of electrochemically- and thermally-induced swelling. Moreover, the model incorporates the influences of changes in preload and ambient temperature on the force considering severe environmental conditions electrified vehicles face. Intensive experimental validation demonstrates that the proposed multi-physics model accurately predicts the surface temperature and reaction force for a wide operational range of preload and ambient temperature. This high fidelity model can be useful for more accurate and robust state of charge estimation considering the complex dynamic behaviors of the battery cell. Furthermore, the inherent simplicity of the mechanical measurements offers distinct advantages to improve the existing power and thermal management strategies for battery management.

3D Printed Organ Models with Physical Properties of Tissue and Integrated Sensors

PubMed Central

Qiu, Kaiyan; Zhao, Zichen; Haghiashtiani, Ghazaleh; Guo, Shuang-Zhuang; He, Mingyu; Su, Ruitao; Zhu, Zhijie; Bhuiyan, Didarul B.; Murugan, Paari; Meng, Fanben; Park, Sung Hyun; Chu, Chih-Chang; Ogle, Brenda M.; Saltzman, Daniel A.; Konety, Badrinath R.

2017-01-01

The design and development of novel methodologies and customized materials to fabricate patient-specific 3D printed organ models with integrated sensing capabilities could yield advances in smart surgical aids for preoperative planning and rehearsal. Here, we demonstrate 3D printed prostate models with physical properties of tissue and integrated soft electronic sensors using custom-formulated polymeric inks. The models show high quantitative fidelity in static and dynamic mechanical properties, optical characteristics, and anatomical geometries to patient tissues and organs. The models offer tissue-mimicking tactile sensation and behavior and thus can be used for the prediction of organ physical behavior under deformation. The prediction results show good agreement with values obtained from simulations. The models also allow the application of surgical and diagnostic tools to their surface and inner channels. Finally, via the conformal integration of 3D printed soft electronic sensors, pressure applied to the models with surgical tools can be quantitatively measured. PMID:29608202

Sensitivity of Hypoxia Predictions for the Northern Gulf of Mexico to Sediment Oxygen Consumption and Model Nesting

NASA Astrophysics Data System (ADS)

Fennel, Katja; Hu, Jiatang; Laurent, Arnaud; Marta-Almeida, Martinho; Hetland, Robert

2014-05-01

Interannual variations of the hypoxic area that develops every summer over the Texas-Louisiana Shelf are large. The 2008 Action Plan put forth by an alliance of multiple state and federal agencies and tribes calls for a decrease of the hypoxic area through nutrient management in the watershed. Realistic models help build mechanistic understanding of the processes underlying hypoxia formation and are thus indispensable for devising efficient nutrient reduction strategies. Here we present such a model, evaluate its hypoxia predictions against monitoring observations and assess the sensitivity of hypoxia predictions to model resolution, variations in sediment oxygen consumption and choice of physical horizontal boundary conditions. We find that hypoxia predictions on the shelf are very sensitive to the parameterization of sediment oxygen consumption, a result of the fact that hypoxic conditions are restricted to a relatively thin layer above the bottom over most of the shelf. We also show that the strength of vertical stratification is an important predictor of oxygen concentration in bottom waters and that modification of physical horizontal boundary conditions can have a large effect on hypoxia predictions.

Barriers to Mindfulness: a Path Analytic Model Exploring the Role of Rumination and Worry in Predicting Psychological and Physical Engagement in an Online Mindfulness-Based Intervention.

PubMed

Banerjee, Moitree; Cavanagh, Kate; Strauss, Clara

2018-01-01

Little is known about the factors associated with engagement in mindfulness-based interventions (MBIs). Moreover, engagement in MBIs is usually defined in terms of class attendance ('physical engagement') only. However, in the psychotherapy literature, there is increasing emphasis on measuring participants' involvement with interventions ('psychological engagement'). This study tests a model that rumination and worry act as barriers to physical and psychological engagement in MBIs and that this in turn impedes learning mindfulness. One hundred and twenty-four participants were given access to a 2-week online mindfulness-based self-help (MBSH) intervention. Self-report measures of mindfulness, rumination, worry, positive beliefs about rumination, positive beliefs about worry and physical and psychological engagement were administered. A path analysis was used to test the linear relationships between the variables. Physical and psychological engagement were identified as two distinct constructs. Findings were that rumination and worry both predicted psychological disengagement in MBSH. Psychological engagement predicted change in the describe, act with awareness, non-judge and non-react facets of mindfulness while physical engagement only predicted changes in the non-react facet of mindfulness. Thus, rumination and worry may increase risk of psychological disengagement from MBSH which may in turn hinder cultivating mindfulness. Future suggestions for practice are discussed.

Prediction of sport adherence through the influence of autonomy-supportive coaching among spanish adolescent athletes.

PubMed

Almagro, Bartolomé J; Sáenz-López, Pedro; Moreno, Juan A

2010-01-01

The purpose of this study was to test a motivational model of the coach-athlete relationship, based on self-determination theory and on the hierarchical model of intrinsic and extrinsic motivation. The sample comprised of 608 athletes (ages of 12-17 years) completed the following measures: interest in athlete's input, praise for autonomous behavior, perceived autonomy, intrinsic motivation, and the intention to be physically active. Structural equation modeling results demonstrated that interest in athletes' input and praise for autonomous behavior predicted perceived autonomy, and perceived autonomy positively predicted intrinsic motivation. Finally, intrinsic motivation predicted the intention to be physically active in the future. The results are discussed in relation to the importance of the climate of autonomy support created by the coach on intrinsic motivation and adherence to sport by adolescent athletes. Further, the results provide information related to the possible objectives of future interventions for the education of coaches, with the goal of providing them with tools and strategies to favor the development of intrinsic motivation among their athletes. In conclusion, the climate of autonomy support created by the coach can predict the autonomy perceived by the athletes which predicts the intrinsic motivation experienced by the athletes, and therefore, their adherence to athletic practice. Key pointsImportance of the climate of autonomy support created by the coach on intrinsic motivation and adherence to sport by adolescent athletes.Interest in athletes' input and praise for autonomous behavior predicted perceived autonomy, and perceived autonomy positively predicted intrinsic motivation.Intrinsic motivation predicted the intention to be physically active in the future.

Prediction of Sport Adherence Through the Influence of Autonomy-Supportive Coaching Among Spanish Adolescent Athletes

PubMed Central

Almagro, Bartolomé J.; Sáenz-López, Pedro; Moreno, Juan A.

2010-01-01

The purpose of this study was to test a motivational model of the coach-athlete relationship, based on self-determination theory and on the hierarchical model of intrinsic and extrinsic motivation. The sample comprised of 608 athletes (ages of 12-17 years) completed the following measures: interest in athlete's input, praise for autonomous behavior, perceived autonomy, intrinsic motivation, and the intention to be physically active. Structural equation modeling results demonstrated that interest in athletes' input and praise for autonomous behavior predicted perceived autonomy, and perceived autonomy positively predicted intrinsic motivation. Finally, intrinsic motivation predicted the intention to be physically active in the future. The results are discussed in relation to the importance of the climate of autonomy support created by the coach on intrinsic motivation and adherence to sport by adolescent athletes. Further, the results provide information related to the possible objectives of future interventions for the education of coaches, with the goal of providing them with tools and strategies to favor the development of intrinsic motivation among their athletes. In conclusion, the climate of autonomy support created by the coach can predict the autonomy perceived by the athletes which predicts the intrinsic motivation experienced by the athletes, and therefore, their adherence to athletic practice. Key points Importance of the climate of autonomy support created by the coach on intrinsic motivation and adherence to sport by adolescent athletes. Interest in athletes' input and praise for autonomous behavior predicted perceived autonomy, and perceived autonomy positively predicted intrinsic motivation. Intrinsic motivation predicted the intention to be physically active in the future. PMID:24149380

Predictors of emotional and physical dating violence in a sample of serious juvenile offenders.

PubMed

Sweeten, Gary; Larson, Matthew; Piquero, Alex R

2016-10-01

We estimate group-based dating violence trajectories and identify the adolescent risk factors that explain membership in each trajectory group. Using longitudinal data from the Pathways to Desistance Study, which follows a sample of 1354 serious juvenile offenders from Philadelphia, Pennsylvania and Phoenix, Arizona between mid-adolescence and early adulthood, we estimate group-based trajectory models of both emotional dating violence and physical dating violence over a span of five years in young adulthood. We then estimate multinomial logistic regression models to identify theoretically motivated risk factors that predict membership in these groups. We identified three developmental patterns of emotional dating violence: none (33%), low-level (59%) and high-level decreasing (8%). The best-fitting model for physical dating violence also had three groups: none (73%), low-level (24%) and high-level (3%). Race/ethnicity, family and psychosocial variables were among the strongest predictors of both emotional and physical dating violence. In addition, delinquency history variables predicted emotional dating violence and relationship variables predicted physical dating violence. Dating violence is quite prevalent in young adulthood among serious juvenile offenders. Numerous predictors distinguish between chronic dating violence perpetrators and other groups. These may suggest points of intervention for reducing future violence. Copyright © 2016 John Wiley & Sons, Ltd. Copyright © 2016 John Wiley & Sons, Ltd.

Dilution physics modeling: Dissolution/precipitation chemistry

DOE Office of Scientific and Technical Information (OSTI.GOV)

Onishi, Y.; Reid, H.C.; Trent, D.S.

This report documents progress made to date on integrating dilution/precipitation chemistry and new physical models into the TEMPEST thermal-hydraulics computer code. Implementation of dissolution/precipitation chemistry models is necessary for predicting nonhomogeneous, time-dependent, physical/chemical behavior of tank wastes with and without a variety of possible engineered remediation and mitigation activities. Such behavior includes chemical reactions, gas retention, solids resuspension, solids dissolution and generation, solids settling/rising, and convective motion of physical and chemical species. Thus this model development is important from the standpoint of predicting the consequences of various engineered activities, such as mitigation by dilution, retrieval, or pretreatment, that can affectmore » safe operations. The integration of a dissolution/precipitation chemistry module allows the various phase species concentrations to enter into the physical calculations that affect the TEMPEST hydrodynamic flow calculations. The yield strength model of non-Newtonian sludge correlates yield to a power function of solids concentration. Likewise, shear stress is concentration-dependent, and the dissolution/precipitation chemistry calculations develop the species concentration evolution that produces fluid flow resistance changes. Dilution of waste with pure water, molar concentrations of sodium hydroxide, and other chemical streams can be analyzed for the reactive species changes and hydrodynamic flow characteristics.« less

Statistical physics of interacting neural networks

NASA Astrophysics Data System (ADS)

Kinzel, Wolfgang; Metzler, Richard; Kanter, Ido

2001-12-01

Recent results on the statistical physics of time series generation and prediction are presented. A neural network is trained on quasi-periodic and chaotic sequences and overlaps to the sequence generator as well as the prediction errors are calculated numerically. For each network there exists a sequence for which it completely fails to make predictions. Two interacting networks show a transition to perfect synchronization. A pool of interacting networks shows good coordination in the minority game-a model of competition in a closed market. Finally, as a demonstration, a perceptron predicts bit sequences produced by human beings.

Strike-Slip Fault Patterns on Europa: Obliquity or Polar Wander?

NASA Technical Reports Server (NTRS)

Rhoden, Alyssa Rose; Hurford, Terry A.; Manga, Michael

2011-01-01

Variations in diurnal tidal stress due to Europa's eccentric orbit have been considered as the driver of strike-slip motion along pre-existing faults, but obliquity and physical libration have not been taken into account. The first objective of this work is to examine the effects of obliquity on the predicted global pattern of fault slip directions based on a tidal-tectonic formation model. Our second objective is to test the hypothesis that incorporating obliquity can reconcile theory and observations without requiring polar wander, which was previously invoked to explain the mismatch found between the slip directions of 192 faults on Europa and the global pattern predicted using the eccentricity-only model. We compute predictions for individual, observed faults at their current latitude, longitude, and azimuth with four different tidal models: eccentricity only, eccentricity plus obliquity, eccentricity plus physical libration, and a combination of all three effects. We then determine whether longitude migration, presumably due to non-synchronous rotation, is indicated in observed faults by repeating the comparisons with and without obliquity, this time also allowing longitude translation. We find that a tidal model including an obliquity of 1.2?, along with longitude migration, can predict the slip directions of all observed features in the survey. However, all but four faults can be fit with only 1? of obliquity so the value we find may represent the maximum departure from a lower time-averaged obliquity value. Adding physical libration to the obliquity model improves the accuracy of predictions at the current locations of the faults, but fails to predict the slip directions of six faults and requires additional degrees of freedom. The obliquity model with longitude migration is therefore our preferred model. Although the polar wander interpretation cannot be ruled out from these results alone, the obliquity model accounts for all observations with a value consistent with theoretical expectations and cycloid modeling.

Accuracy Analysis of a Box-wing Theoretical SRP Model

NASA Astrophysics Data System (ADS)

Wang, Xiaoya; Hu, Xiaogong; Zhao, Qunhe; Guo, Rui

2016-07-01

For Beidou satellite navigation system (BDS) a high accuracy SRP model is necessary for high precise applications especially with Global BDS establishment in future. The BDS accuracy for broadcast ephemeris need be improved. So, a box-wing theoretical SRP model with fine structure and adding conical shadow factor of earth and moon were established. We verified this SRP model by the GPS Block IIF satellites. The calculation was done with the data of PRN 1, 24, 25, 27 satellites. The results show that the physical SRP model for POD and forecast for GPS IIF satellite has higher accuracy with respect to Bern empirical model. The 3D-RMS of orbit is about 20 centimeters. The POD accuracy for both models is similar but the prediction accuracy with the physical SRP model is more than doubled. We tested 1-day 3-day and 7-day orbit prediction. The longer is the prediction arc length, the more significant is the improvement. The orbit prediction accuracy with the physical SRP model for 1-day, 3-day and 7-day arc length are 0.4m, 2.0m, 10.0m respectively. But they are 0.9m, 5.5m and 30m with Bern empirical model respectively. We apply this means to the BDS and give out a SRP model for Beidou satellites. Then we test and verify the model with Beidou data of one month only for test. Initial results show the model is good but needs more data for verification and improvement. The orbit residual RMS is similar to that with our empirical force model which only estimate the force for along track, across track direction and y-bias. But the orbit overlap and SLR observation evaluation show some improvement. The remaining empirical force is reduced significantly for present Beidou constellation.

Modeling Global Ocean Biogeochemistry With Physical Data Assimilation: A Pragmatic Solution to the Equatorial Instability

NASA Astrophysics Data System (ADS)

Park, Jong-Yeon; Stock, Charles A.; Yang, Xiaosong; Dunne, John P.; Rosati, Anthony; John, Jasmin; Zhang, Shaoqing

2018-03-01

Reliable estimates of historical and current biogeochemistry are essential for understanding past ecosystem variability and predicting future changes. Efforts to translate improved physical ocean state estimates into improved biogeochemical estimates, however, are hindered by high biogeochemical sensitivity to transient momentum imbalances that arise during physical data assimilation. Most notably, the breakdown of geostrophic constraints on data assimilation in equatorial regions can lead to spurious upwelling, resulting in excessive equatorial productivity and biogeochemical fluxes. This hampers efforts to understand and predict the biogeochemical consequences of El Niño and La Niña. We develop a strategy to robustly integrate an ocean biogeochemical model with an ensemble coupled-climate data assimilation system used for seasonal to decadal global climate prediction. Addressing spurious vertical velocities requires two steps. First, we find that tightening constraints on atmospheric data assimilation maintains a better equatorial wind stress and pressure gradient balance. This reduces spurious vertical velocities, but those remaining still produce substantial biogeochemical biases. The remainder is addressed by imposing stricter fidelity to model dynamics over data constraints near the equator. We determine an optimal choice of model-data weights that removed spurious biogeochemical signals while benefitting from off-equatorial constraints that still substantially improve equatorial physical ocean simulations. Compared to the unconstrained control run, the optimally constrained model reduces equatorial biogeochemical biases and markedly improves the equatorial subsurface nitrate concentrations and hypoxic area. The pragmatic approach described herein offers a means of advancing earth system prediction in parallel with continued data assimilation advances aimed at fully considering equatorial data constraints.

Physical workload, leisure-time physical activity, obesity and smoking as predictors of multisite musculoskeletal pain. A 2-year prospective study of kitchen workers.

PubMed

Haukka, Eija; Ojajärvi, Anneli; Takala, Esa-Pekka; Viikari-Juntura, Eira; Leino-Arjas, Päivi

2012-07-01

The aim of this prospective study was to examine the role of physical workload, leisure-time physical activity, obesity and smoking in predicting the occurrence and course of multisite musculoskeletal pain (MSP). Data on physical and psychosocial workload, lifestyle factors and MSP were based on questionnaire surveys of 385 Finnish female kitchen workers. MSP (defined as pain at three or more of seven sites) during the past 3 months was measured repeatedly at 3-month intervals over 2 years. Four different patterns (trajectories) in the course of MSP were identified. The authors analysed whether the determinants at baseline predicted the occurrence of MSP (1) at the 2-year follow-up and (2) over the total of nine measurements during the 2 years by exploiting the MSP trajectories. Logistic regression was used. High physical workload at baseline was an independent predictor of MSP at the 2-year follow-up (OR 3.8, 95% CI 1.7 to 8.5) in a model allowing for age, psychosocial factors at work and lifestyle. High physical workload (OR 2.0, 95% CI 1.0 to 4.0) and moderate (OR 2.4, 95% CI 1.2 to 4.9) or low (OR 2.3, 95% CI 1.1 to 4.7) physical activity predicted persistent MSP. Obesity (OR 2.8, 95% CI 1.0 to 7.8) predicted an increased, and not being obese (OR 3.7, 95% CI 1.1 to 12.7) a decreased, prevalence of MSP in models similarly including all covariates. Smoking had no effect. The results emphasise the importance of high physical workload, low to moderate physical activity and obesity as potential modifiable risk factors for the occurrence and course of MSP over time.

Impulsive Approach Tendencies towards Physical Activity and Sedentary Behaviors, but Not Reflective Intentions, Prospectively Predict Non-Exercise Activity Thermogenesis

PubMed Central

Cheval, Boris; Sarrazin, Philippe; Pelletier, Luc

2014-01-01

Understanding the determinants of non-exercise activity thermogenesis (NEAT) is crucial, given its extensive health benefits. Some scholars have assumed that a proneness to react differently to environmental cues promoting sedentary versus active behaviors could be responsible for inter-individual differences in NEAT. In line with this reflection and grounded on the Reflective-Impulsive Model, we test the assumption that impulsive processes related to sedentary and physical activity behaviors can prospectively predict NEAT, operationalized as spontaneous effort exerted to maintain low intensity muscle contractions within the release phases of an intermittent maximal isometric contraction task. Participants (n = 91) completed a questionnaire assessing their intentions to adopt physical activity behaviors and a manikin task to assess impulsive approach tendencies towards physical activity behaviors (IAPA) and sedentary behaviors (IASB). Participants were then instructed to perform a maximal handgrip strength task and an intermittent maximal isometric contraction task. As hypothesized, multilevel regression analyses revealed that spontaneous effort was (a) positively predicted by IAPA, (b) negatively predicted by IASB, and (c) was not predicted by physical activity intentions, after controlling for some confounding variables such as age, sex, usual PA level and average force provided during the maximal-contraction phases of the task. These effects remained constant throughout all the phases of the task. This study demonstrated that impulsive processes may play a unique role in predicting spontaneous physical activity behaviors. Theoretically, this finding reinforces the utility of a motivational approach based on dual-process models to explain inter-individual differences in NEAT. Implications for health behavior theories and behavior change interventions are outlined. PMID:25526596

Impulsive approach tendencies towards physical activity and sedentary behaviors, but not reflective intentions, prospectively predict non-exercise activity thermogenesis.

PubMed

Cheval, Boris; Sarrazin, Philippe; Pelletier, Luc

2014-01-01

Understanding the determinants of non-exercise activity thermogenesis (NEAT) is crucial, given its extensive health benefits. Some scholars have assumed that a proneness to react differently to environmental cues promoting sedentary versus active behaviors could be responsible for inter-individual differences in NEAT. In line with this reflection and grounded on the Reflective-Impulsive Model, we test the assumption that impulsive processes related to sedentary and physical activity behaviors can prospectively predict NEAT, operationalized as spontaneous effort exerted to maintain low intensity muscle contractions within the release phases of an intermittent maximal isometric contraction task. Participants (n = 91) completed a questionnaire assessing their intentions to adopt physical activity behaviors and a manikin task to assess impulsive approach tendencies towards physical activity behaviors (IAPA) and sedentary behaviors (IASB). Participants were then instructed to perform a maximal handgrip strength task and an intermittent maximal isometric contraction task. As hypothesized, multilevel regression analyses revealed that spontaneous effort was (a) positively predicted by IAPA, (b) negatively predicted by IASB, and (c) was not predicted by physical activity intentions, after controlling for some confounding variables such as age, sex, usual PA level and average force provided during the maximal-contraction phases of the task. These effects remained constant throughout all the phases of the task. This study demonstrated that impulsive processes may play a unique role in predicting spontaneous physical activity behaviors. Theoretically, this finding reinforces the utility of a motivational approach based on dual-process models to explain inter-individual differences in NEAT. Implications for health behavior theories and behavior change interventions are outlined.

Three-dimensional fuel pin model validation by prediction of hydrogen distribution in cladding and comparison with experiment

DOE Office of Scientific and Technical Information (OSTI.GOV)

Aly, A.; Avramova, Maria; Ivanov, Kostadin

To correctly describe and predict this hydrogen distribution there is a need for multi-physics coupling to provide accurate three-dimensional azimuthal, radial, and axial temperature distributions in the cladding. Coupled high-fidelity reactor-physics codes with a sub-channel code as well as with a computational fluid dynamics (CFD) tool have been used to calculate detailed temperature distributions. These high-fidelity coupled neutronics/thermal-hydraulics code systems are coupled further with the fuel-performance BISON code with a kernel (module) for hydrogen. Both hydrogen migration and precipitation/dissolution are included in the model. Results from this multi-physics analysis is validated utilizing calculations of hydrogen distribution using models informed bymore » data from hydrogen experiments and PIE data.« less

Thermal barrier coating life prediction model development, phase 2

NASA Technical Reports Server (NTRS)

Meier, Susan Manning; Sheffler, Keith D.; Nissley, David M.

1991-01-01

The objective of this program was to generate a life prediction model for electron-beam-physical vapor deposited (EB-PVD) zirconia thermal barrier coating (TBC) on gas turbine engine components. Specific activities involved in development of the EB-PVD life prediction model included measurement of EB-PVD ceramic physical and mechanical properties and adherence strength, measurement of the thermally grown oxide (TGO) growth kinetics, generation of quantitative cyclic thermal spallation life data, and development of a spallation life prediction model. Life data useful for model development was obtained by exposing instrumented, EB-PVD ceramic coated cylindrical specimens in a jet fueled burner rig. Monotonic compression and tensile mechanical tests and physical property tests were conducted to obtain the EB-PVD ceramic behavior required for burner rig specimen analysis. As part of that effort, a nonlinear constitutive model was developed for the EB-PVD ceramic. Spallation failure of the EB-PVD TBC system consistently occurred at the TGO-metal interface. Calculated out-of-plane stresses were a small fraction of that required to statically fail the TGO. Thus, EB-PVD spallation was attributed to the interfacial cracking caused by in-plane TGO strains. Since TGO mechanical properties were not measured in this program, calculation of the burner rig specimen TGO in-plane strains was performed by using alumina properties. A life model based on maximum in-plane TGO tensile mechanical strain and TGO thickness correlated the burner rig specimen EB-PVD ceramic spallation lives within a factor of about plus or minus 2X.

Predictive and mechanistic multivariate linear regression models for reaction development

PubMed Central

Santiago, Celine B.; Guo, Jing-Yao

2018-01-01

Multivariate Linear Regression (MLR) models utilizing computationally-derived and empirically-derived physical organic molecular descriptors are described in this review. Several reports demonstrating the effectiveness of this methodological approach towards reaction optimization and mechanistic interrogation are discussed. A detailed protocol to access quantitative and predictive MLR models is provided as a guide for model development and parameter analysis. PMID:29719711

A combination of routine blood analytes predicts fitness decrement in elderly endurance athletes.

PubMed

Haslacher, Helmuth; Ratzinger, Franz; Perkmann, Thomas; Batmyagmar, Delgerdalai; Nistler, Sonja; Scherzer, Thomas M; Ponocny-Seliger, Elisabeth; Pilger, Alexander; Gerner, Marlene; Scheichenberger, Vanessa; Kundi, Michael; Endler, Georg; Wagner, Oswald F; Winker, Robert

2017-01-01

Endurance sports are enjoying greater popularity, particularly among new target groups such as the elderly. Predictors of future physical capacities providing a basis for training adaptations are in high demand. We therefore aimed to estimate the future physical performance of elderly marathoners (runners/bicyclists) using a set of easily accessible standard laboratory parameters. To this end, 47 elderly marathon athletes underwent physical examinations including bicycle ergometry and a blood draw at baseline and after a three-year follow-up period. In order to compile a statistical model containing baseline laboratory results allowing prediction of follow-up ergometry performance, the cohort was subgrouped into a model training (n = 25) and a test sample (n = 22). The model containing significant predictors in univariate analysis (alanine aminotransferase, urea, folic acid, myeloperoxidase and total cholesterol) presented with high statistical significance and excellent goodness of fit (R2 = 0.789, ROC-AUC = 0.951±0.050) in the model training sample and was validated in the test sample (ROC-AUC = 0.786±0.098). Our results suggest that standard laboratory parameters could be particularly useful for predicting future physical capacity in elderly marathoners. It hence merits further research whether these conclusions can be translated to other disciplines or age groups.

A combination of routine blood analytes predicts fitness decrement in elderly endurance athletes

PubMed Central

Ratzinger, Franz; Perkmann, Thomas; Batmyagmar, Delgerdalai; Nistler, Sonja; Scherzer, Thomas M.; Ponocny-Seliger, Elisabeth; Pilger, Alexander; Gerner, Marlene; Scheichenberger, Vanessa; Kundi, Michael; Endler, Georg; Wagner, Oswald F.; Winker, Robert

2017-01-01

Endurance sports are enjoying greater popularity, particularly among new target groups such as the elderly. Predictors of future physical capacities providing a basis for training adaptations are in high demand. We therefore aimed to estimate the future physical performance of elderly marathoners (runners/bicyclists) using a set of easily accessible standard laboratory parameters. To this end, 47 elderly marathon athletes underwent physical examinations including bicycle ergometry and a blood draw at baseline and after a three-year follow-up period. In order to compile a statistical model containing baseline laboratory results allowing prediction of follow-up ergometry performance, the cohort was subgrouped into a model training (n = 25) and a test sample (n = 22). The model containing significant predictors in univariate analysis (alanine aminotransferase, urea, folic acid, myeloperoxidase and total cholesterol) presented with high statistical significance and excellent goodness of fit (R2 = 0.789, ROC-AUC = 0.951±0.050) in the model training sample and was validated in the test sample (ROC-AUC = 0.786±0.098). Our results suggest that standard laboratory parameters could be particularly useful for predicting future physical capacity in elderly marathoners. It hence merits further research whether these conclusions can be translated to other disciplines or age groups. PMID:28475643

Effect of citizen engagement levels in flood forecasting by assimilating crowdsourced observations in hydrological models

NASA Astrophysics Data System (ADS)

Mazzoleni, Maurizio; Cortes Arevalo, Juliette; Alfonso, Leonardo; Wehn, Uta; Norbiato, Daniele; Monego, Martina; Ferri, Michele; Solomatine, Dimitri

2017-04-01

In the past years, a number of methods have been proposed to reduce uncertainty in flood prediction by means of model updating techniques. Traditional physical observations are usually integrated into hydrological and hydraulic models to improve model performances and consequent flood predictions. Nowadays, low-cost sensors can be used for crowdsourced observations. Different type of social sensors can measure, in a more distributed way, physical variables such as precipitation and water level. However, these crowdsourced observations are not integrated into a real-time fashion into water-system models due to their varying accuracy and random spatial-temporal coverage. We assess the effect in model performance due to the assimilation of crowdsourced observations of water level. Our method consists in (1) implementing a Kalman filter into a cascade of hydrological and hydraulic models. (2) defining observation errors depending on the type of sensor either physical or social. Randomly distributed errors are based on accuracy ranges that slightly improve according to the citizens' expertise level. (3) Using a simplified social model to realistically represent citizen engagement levels based on population density and citizens' motivation scenarios. To test our method, we synthetically derive crowdsourced observations for different citizen engagement levels from a distributed network of physical and social sensors. The observations are assimilated during a particular flood event occurred in the Bacchiglione catchment, Italy. The results of this study demonstrate that sharing crowdsourced water level observations (often motivated by a feeling of belonging to a community of friends) can help in improving flood prediction. On the other hand, a growing participation of individual citizens or weather enthusiasts sharing hydrological observations in cities can help to improve model performance. This study is a first step to assess the effects of crowdsourced observations in flood model predictions. Effective communication and feedback about the quality of observations from water authorities to engaged citizens are further required to minimize their intrinsic low-variable accuracy.

Estimation of Physical Properties and Chemical Reactivity Parameters of Organic Compounds for Environmental Modeling by SPARC

EPA Science Inventory

Mathematical models for predicting the transport and fate of pollutants in the environment require reactivity parameter values that is value of the physical and chemical constants that govern reactivity. Although empirical structure activity relationships have been developed th...

DOE Office of Scientific and Technical Information (OSTI.GOV)

Puskar, Joseph David; Quintana, Michael A.; Sorensen, Neil Robert

A program is underway at Sandia National Laboratories to predict long-term reliability of photovoltaic (PV) systems. The vehicle for the reliability predictions is a Reliability Block Diagram (RBD), which models system behavior. Because this model is based mainly on field failure and repair times, it can be used to predict current reliability, but it cannot currently be used to accurately predict lifetime. In order to be truly predictive, physics-informed degradation processes and failure mechanisms need to be included in the model. This paper describes accelerated life testing of metal foil tapes used in thin-film PV modules, and how tape jointmore » degradation, a possible failure mode, can be incorporated into the model.« less

Evaluating crown fire rate of spread predictions from physics-based models

Treesearch

C. M. Hoffman; J. Ziegler; J. Canfield; R. R. Linn; W. Mell; C. H. Sieg; F. Pimont

2015-01-01

Modeling the behavior of crown fires is challenging due to the complex set of coupled processes that drive the characteristics of a spreading wildfire and the large range of spatial and temporal scales over which these processes occur. Detailed physics-based modeling approaches such as FIRETEC and the Wildland Urban Interface Fire Dynamics Simulator (WFDS) simulate...

Microstructure-based approach for predicting crack initiation and early growth in metals.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cox, James V.; Emery, John M.; Brewer, Luke N.

2009-09-01

Fatigue cracking in metals has been and is an area of great importance to the science and technology of structural materials for quite some time. The earliest stages of fatigue crack nucleation and growth are dominated by the microstructure and yet few models are able to predict the fatigue behavior during these stages because of a lack of microstructural physics in the models. This program has developed several new simulation tools to increase the microstructural physics available for fatigue prediction. In addition, this program has extended and developed microscale experimental methods to allow the validation of new microstructural models formore » deformation in metals. We have applied these developments to fatigue experiments in metals where the microstructure has been intentionally varied.« less

Unitarity and predictiveness in new Higgs inflation

NASA Astrophysics Data System (ADS)

Fumagalli, Jacopo; Mooij, Sander; Postma, Marieke

2018-03-01

In new Higgs inflation the Higgs kinetic terms are non-minimally coupled to the Einstein tensor, allowing the Higgs field to play the role of the inflaton. The new interaction is non-renormalizable, and the model only describes physics below some cutoff scale. Even if the unknown UV physics does not affect the tree level inflaton potential significantly, it may still enter at loop level and modify the running of the Standard Model (SM) parameters. This is analogous to what happens in the original model for Higgs inflation. A key difference, though, is that in new Higgs inflation the inflationary predictions are sensitive to this running. Thus the boundary conditions at the EW scale as well as the unknown UV completion may leave a signature on the inflationary parameters. However, this dependence can be evaded if the kinetic terms of the SM fermions and gauge fields are non-minimally coupled to gravity as well. Our approach to determine the model's UV dependence and the connection between low and high scale physics can be used in any particle physics model of inflation.

Predictive model for falling in Parkinson disease patients.

PubMed

Custodio, Nilton; Lira, David; Herrera-Perez, Eder; Montesinos, Rosa; Castro-Suarez, Sheila; Cuenca-Alfaro, Jose; Cortijo, Patricia

2016-12-01

Falls are a common complication of advancing Parkinson's disease (PD). Although numerous risk factors are known, reliable predictors of future falls are still lacking. The aim of this study was to develop a multivariate model to predict falling in PD patients. Prospective cohort with forty-nine PD patients. The area under the receiver-operating characteristic curve (AUC) was calculated to evaluate predictive performance of the purposed multivariate model. The median of PD duration and UPDRS-III score in the cohort was 6 years and 24 points, respectively. Falls occurred in 18 PD patients (30%). Predictive factors for falling identified by univariate analysis were age, PD duration, physical activity, and scores of UPDRS motor, FOG, ACE, IFS, PFAQ and GDS ( p -value < 0.001), as well as fear of falling score ( p -value = 0.04). The final multivariate model (PD duration, FOG, ACE, and physical activity) showed an AUC = 0.9282 (correctly classified = 89.83%; sensitivity = 92.68%; specificity = 83.33%). This study showed that our multivariate model have a high performance to predict falling in a sample of PD patients.

Original predictive approach to the compressibility of pharmaceutical powder mixtures based on the Kawakita equation.

PubMed

Mazel, Vincent; Busignies, Virginie; Duca, Stéphane; Leclerc, Bernard; Tchoreloff, Pierre

2011-05-30

In the pharmaceutical industry, tablets are obtained by the compaction of two or more components which have different physical properties and compaction behaviours. Therefore, it could be interesting to predict the physical properties of the mixture using the single-component results. In this paper, we have focused on the prediction of the compressibility of binary mixtures using the Kawakita model. Microcrystalline cellulose (MCC) and L-alanine were compacted alone and mixed at different weight fractions. The volume reduction, as a function of the compaction pressure, was acquired during the compaction process ("in-die") and after elastic recovery ("out-of-die"). For the pure components, the Kawakita model is well suited to the description of the volume reduction. For binary mixtures, an original approach for the prediction of the volume reduction without using the effective Kawakita parameters was proposed and tested. The good agreement between experimental and predicted data proved that this model was efficient to predict the volume reduction of MCC and L-alanine mixtures during compaction experiments. Copyright © 2011 Elsevier B.V. All rights reserved.

Early prediction of extreme stratospheric polar vortex states based on causal precursors

NASA Astrophysics Data System (ADS)

Kretschmer, Marlene; Runge, Jakob; Coumou, Dim

2017-08-01

Variability in the stratospheric polar vortex (SPV) can influence the tropospheric circulation and thereby winter weather. Early predictions of extreme SPV states are thus important to improve forecasts of winter weather including cold spells. However, dynamical models are usually restricted in lead time because they poorly capture low-frequency processes. Empirical models often suffer from overfitting problems as the relevant physical processes and time lags are often not well understood. Here we introduce a novel empirical prediction method by uniting a response-guided community detection scheme with a causal discovery algorithm. This way, we objectively identify causal precursors of the SPV at subseasonal lead times and find them to be in good agreement with known physical drivers. A linear regression prediction model based on the causal precursors can explain most SPV variability (r2 = 0.58), and our scheme correctly predicts 58% (46%) of extremely weak SPV states for lead times of 1-15 (16-30) days with false-alarm rates of only approximately 5%. Our method can be applied to any variable relevant for (sub)seasonal weather forecasts and could thus help improving long-lead predictions.

Cross-national validation of prognostic models predicting sickness absence and the added value of work environment variables.

PubMed

Roelen, Corné A M; Stapelfeldt, Christina M; Heymans, Martijn W; van Rhenen, Willem; Labriola, Merete; Nielsen, Claus V; Bültmann, Ute; Jensen, Chris

2015-06-01

To validate Dutch prognostic models including age, self-rated health and prior sickness absence (SA) for ability to predict high SA in Danish eldercare. The added value of work environment variables to the models' risk discrimination was also investigated. 2,562 municipal eldercare workers (95% women) participated in the Working in Eldercare Survey. Predictor variables were measured by questionnaire at baseline in 2005. Prognostic models were validated for predictions of high (≥30) SA days and high (≥3) SA episodes retrieved from employer records during 1-year follow-up. The accuracy of predictions was assessed by calibration graphs and the ability of the models to discriminate between high- and low-risk workers was investigated by ROC-analysis. The added value of work environment variables was measured with Integrated Discrimination Improvement (IDI). 1,930 workers had complete data for analysis. The models underestimated the risk of high SA in eldercare workers and the SA episodes model had to be re-calibrated to the Danish data. Discrimination was practically useful for the re-calibrated SA episodes model, but not the SA days model. Physical workload improved the SA days model (IDI = 0.40; 95% CI 0.19-0.60) and psychosocial work factors, particularly the quality of leadership (IDI = 0.70; 95% CI 053-0.86) improved the SA episodes model. The prognostic model predicting high SA days showed poor performance even after physical workload was added. The prognostic model predicting high SA episodes could be used to identify high-risk workers, especially when psychosocial work factors are added as predictor variables.

Lattice QCD and physics beyond the Standar Model: an experimentalist perspective

NASA Astrophysics Data System (ADS)

Artuso, Marina

2017-01-01

The new frontier in elementary particle physics is to find evidence for new physics that may lead to a deeper understanding of observations such as the baryon-antibaryon asymmetry of the universe, mass hierarchy, dark matter, or dark energy to name a few. Flavor physics provides a wealth of opportunities to find such signatures, and a vast body of data taken at e+e- b-factories and at hadron machines has provided valuable information, and a few tantalizing ``tensions'' with respect to the Standard Model predictions. While the window for new physics is still open, the chance that its manifestations will be subtle is very real. A vibrant experimental program is ongoing, and significant upgrades, such as the upgraded LHCb experiment at LHC and Belle 2 at KEKb, are imminent. One of the challenges in extracting new physics from flavor physics data is the need to relate observed hadron decays to fundamental particles and interactions. The continuous improvement of Lattice QCD predictions is a key element to achieve success in this quest. Improvements in algorithms and hardware have led to predictions of increasing precision on several fundamental matrix elements, and the continuous breaking of new grounds, thus allowing a broader spectrum of measurements to become relevant to this quest. An important aspect of the experiment-lattice synergy is a comparison between lattice predictions with experiment for a variety of hadronic quantities. This talk summarizes current synergies between lattice QCD theory and flavor physics experiments, and gives some highlights of expectations from future upgrades. this work was supported by NSF.

Physical Function Does Not Predict Care Assessment Need Score in Older Veterans.

PubMed

Serra, Monica C; Addison, Odessa; Giffuni, Jamie; Paden, Lydia; Morey, Miriam C; Katzel, Leslie

2017-01-01

The Veterans Health Administration's Care Assessment Need (CAN) score is a statistical model, aimed to predict high-risk patients. We were interested in determining if a relationship existed between physical function and CAN scores. Seventy-four older (71 ± 1 years) male Veterans underwent assessment of CAN score and subjective (Short Form-36 [SF-36]) and objective (self-selected walking speed, four square step test, short physical performance battery) assessment of physical function. Approximately 25% of participants self-reported limitations performing lower intensity activities, while 70% to 90% reported limitations with more strenuous activities. When compared with cut points indicative of functional limitations, 35% to 65% of participants had limitations for each of the objective measures. Any measure of subjective or objective physical function did not predict CAN score. These data indicate that the addition of a physical function assessment may complement the CAN score in the identification of high-risk patients.

Balance Confidence: A Predictor of Perceived Physical Function, Perceived Mobility, and Perceived Recovery 1 Year After Inpatient Stroke Rehabilitation.

PubMed

Torkia, Caryne; Best, Krista L; Miller, William C; Eng, Janice J

2016-07-01

To estimate the effect of balance confidence measured at 1 month poststroke rehabilitation on perceived physical function, mobility, and stroke recovery 12 months later. Longitudinal study (secondary analysis). Multisite, community-based. Community-dwelling individuals (N=69) with stroke living in a home setting. Not applicable. Activities-specific Balance Confidence scale; physical function and mobility subscales of the Stroke Impact Scale 3.0; and a single item from the Stroke Impact Scale for perceived recovery. Balance confidence at 1 month postdischarge from inpatient rehabilitation predicts perceived physical function (model 1), mobility (model 2), and recovery (model 3) 12 months later after adjusting for important covariates. The covariates included in model 1 were age, sex, basic mobility, and depression. The covariates selected for model 2 were age, sex, balance capacity, and anxiety, and the covariates in model 3 were age, sex, walking capacity, and social support. The amount of variance in perceived physical function, perceived mobility, and perceived recovery that balance confidence accounted for was 12%, 9%, and 10%, respectively. After discharge from inpatient rehabilitation poststroke, balance confidence predicts individuals' perceived physical function, mobility, and recovery 12 months later. There is a need to address balance confidence at discharge from inpatient stroke rehabilitation. Copyright © 2016 American Congress of Rehabilitation Medicine. Published by Elsevier Inc. All rights reserved.

An experimental method to verify soil conservation by check dams on the Loess Plateau, China.

PubMed

Xu, X Z; Zhang, H W; Wang, G Q; Chen, S C; Dang, W Q

2009-12-01

A successful experiment with a physical model requires necessary conditions of similarity. This study presents an experimental method with a semi-scale physical model. The model is used to monitor and verify soil conservation by check dams in a small watershed on the Loess Plateau of China. During experiments, the model-prototype ratio of geomorphic variables was kept constant under each rainfall event. Consequently, experimental data are available for verification of soil erosion processes in the field and for predicting soil loss in a model watershed with check dams. Thus, it can predict the amount of soil loss in a catchment. This study also mentions four criteria: similarities of watershed geometry, grain size and bare land, Froude number (Fr) for rainfall event, and soil erosion in downscaled models. The efficacy of the proposed method was confirmed using these criteria in two different downscaled model experiments. The B-Model, a large scale model, simulates watershed prototype. The two small scale models, D(a) and D(b), have different erosion rates, but are the same size. These two models simulate hydraulic processes in the B-Model. Experiment results show that while soil loss in the small scale models was converted by multiplying the soil loss scale number, it was very close to that of the B-Model. Obviously, with a semi-scale physical model, experiments are available to verify and predict soil loss in a small watershed area with check dam system on the Loess Plateau, China.

Clinical correlates of verbal aggression, physical aggression and inappropriate sexual behaviour after brain injury.

PubMed

James, Andrew I W; Young, Andrew W

2013-01-01

To explore the relationships between verbal aggression, physical aggression and inappropriate sexual behaviour following acquired brain injury. Multivariate statistical modelling of observed verbal aggression, physical aggression and inappropriate sexual behaviour utilizing demographic, pre-morbid, injury-related and neurocognitive predictors. Clinical records of 152 participants with acquired brain injury were reviewed, providing an important data set as disordered behaviours had been recorded at the time of occurrence with the Brain Injury Rehabilitation Trust (BIRT) Aggression Rating Scale and complementary measures of inappropriate sexual behaviour. Three behavioural components (verbal aggression, physical aggression and inappropriate sexual behaviour) were identified and subjected to separate logistical regression modelling in a sub-set of 77 participants. Successful modelling was achieved for both verbal and physical aggression (correctly classifying 74% and 65% of participants, respectively), with use of psychotropic medication and poorer verbal function increasing the odds of aggression occurring. Pre-morbid history of aggression predicted verbal but not physical aggression. No variables predicted inappropriate sexual behaviour. Verbal aggression, physical aggression and inappropriate sexual behaviour following acquired brain injury appear to reflect separate clinical phenomena rather than general behavioural dysregulation. Clinical markers that indicate an increased risk of post-injury aggression were not related to inappropriate sexual behaviour.

Modeling quality of life in patients with rheumatic diseases: the role of pain catastrophizing, fear-avoidance beliefs, physical disability, and depression.

PubMed

Shim, Eun-Jung; Hahm, Bong-Jin; Go, Dong Jin; Lee, Kwang-Min; Noh, Hae Lim; Park, Seung-Hee; Song, Yeong Wook

2018-06-01

To examine factors in the fear-avoidance model, such as pain, pain catastrophizing, fear-avoidance beliefs, physical disability, and depression and their relationships with physical and psychological quality of life in patients with rheumatic diseases. The data were obtained from 360 patients with rheumatic diseases who completed self-report measures assessing study variables. Structural equation modeling was used to examine the hypothesized relationships among factors specified in the fear-avoidance model predicting physical and psychological quality of life. Final models fit the data well, explaining 96% and 82% of the variance in physical and psychological quality of life, respectively. Higher pain catastrophizing was related to stronger fear-avoidance beliefs that had a direct negative association with physical disability and depression, which, in turn, negatively affected physical quality of life. Pain severity was also directly related to physical disability. Physical disability also affected physical quality of life indirectly through depression. The hypothesized relationships specified in the model were also confirmed for psychological quality of life. However, physical disability had an indirect association with psychological quality of life via depression. The current results underscore the significant role of cognitive, affective, and behavioral factors in perceived physical disability and their mediated detrimental effect on physical and psychological quality of life in patients with rheumatic diseases. Implications for rehabilitation The fear-avoidance model is applicable to the prediction of quality of life in patients with rheumatic diseases. As pain-catastrophizing and fear-avoidance beliefs are important factors linked to physical disability and depression, intervening these cognitive factors is necessary to improve physical function and depression in patients with rheumatic diseases. Considering the strong association between depression and physical and psychological quality of life, the assessment and treatment of the former should be included in the rehabilitation of patients with rheumatic diseases. Interventions targeting physical function and depression are likely to be effective in terms of improving physical and psychological quality of life in patients with rheumatic diseases.

Inferring mass in complex scenes by mental simulation.

PubMed

Hamrick, Jessica B; Battaglia, Peter W; Griffiths, Thomas L; Tenenbaum, Joshua B

2016-12-01

After observing a collision between two boxes, you can immediately tell which is empty and which is full of books based on how the boxes moved. People form rich perceptions about the physical properties of objects from their interactions, an ability that plays a crucial role in learning about the physical world through our experiences. Here, we present three experiments that demonstrate people's capacity to reason about the relative masses of objects in naturalistic 3D scenes. We find that people make accurate inferences, and that they continue to fine-tune their beliefs over time. To explain our results, we propose a cognitive model that combines Bayesian inference with approximate knowledge of Newtonian physics by estimating probabilities from noisy physical simulations. We find that this model accurately predicts judgments from our experiments, suggesting that the same simulation mechanism underlies both peoples' predictions and inferences about the physical world around them. Copyright © 2016 Elsevier B.V. All rights reserved.

Predictive Power of Prospective Physical Education Teachers' Attitudes towards Educational Technologies for Their Technological Pedagogical Content Knowledge

ERIC Educational Resources Information Center

Varol, Yaprak Kalemoglu

2015-01-01

The aim of the research is to determine the predictive power of prospective physical education teachers' attitudes towards educational technologies for their technological pedagogical content knowledge. In this study, a relational research model was used on a study group that consisted of 529 (M[subscript age]=21.49, SD=1.44) prospective physical…

UNRES server for physics-based coarse-grained simulations and prediction of protein structure, dynamics and thermodynamics.

PubMed

Czaplewski, Cezary; Karczynska, Agnieszka; Sieradzan, Adam K; Liwo, Adam

2018-04-30

A server implementation of the UNRES package (http://www.unres.pl) for coarse-grained simulations of protein structures with the physics-based UNRES model, coined a name UNRES server, is presented. In contrast to most of the protein coarse-grained models, owing to its physics-based origin, the UNRES force field can be used in simulations, including those aimed at protein-structure prediction, without ancillary information from structural databases; however, the implementation includes the possibility of using restraints. Local energy minimization, canonical molecular dynamics simulations, replica exchange and multiplexed replica exchange molecular dynamics simulations can be run with the current UNRES server; the latter are suitable for protein-structure prediction. The user-supplied input includes protein sequence and, optionally, restraints from secondary-structure prediction or small x-ray scattering data, and simulation type and parameters which are selected or typed in. Oligomeric proteins, as well as those containing D-amino-acid residues and disulfide links can be treated. The output is displayed graphically (minimized structures, trajectories, final models, analysis of trajectory/ensembles); however, all output files can be downloaded by the user. The UNRES server can be freely accessed at http://unres-server.chem.ug.edu.pl.

A Model-Based Prognostics Approach Applied to Pneumatic Valves

NASA Technical Reports Server (NTRS)

Daigle, Matthew J.; Goebel, Kai

2011-01-01

Within the area of systems health management, the task of prognostics centers on predicting when components will fail. Model-based prognostics exploits domain knowledge of the system, its components, and how they fail by casting the underlying physical phenomena in a physics-based model that is derived from first principles. Uncertainty cannot be avoided in prediction, therefore, algorithms are employed that help in managing these uncertainties. The particle filtering algorithm has become a popular choice for model-based prognostics due to its wide applicability, ease of implementation, and support for uncertainty management. We develop a general model-based prognostics methodology within a robust probabilistic framework using particle filters. As a case study, we consider a pneumatic valve from the Space Shuttle cryogenic refueling system. We develop a detailed physics-based model of the pneumatic valve, and perform comprehensive simulation experiments to illustrate our prognostics approach and evaluate its effectiveness and robustness. The approach is demonstrated using historical pneumatic valve data from the refueling system.

Launch Vehicle Debris Models and Crew Vehicle Ascent Abort Risk

NASA Technical Reports Server (NTRS)

Gee, Ken; Lawrence, Scott

2013-01-01

For manned space launch systems, a reliable abort system is required to reduce the risks associated with a launch vehicle failure during ascent. Understanding the risks associated with failure environments can be achieved through the use of physics-based models of these environments. Debris fields due to destruction of the launch vehicle is one such environment. To better analyze the risk posed by debris, a physics-based model for generating launch vehicle debris catalogs has been developed. The model predicts the mass distribution of the debris field based on formulae developed from analysis of explosions. Imparted velocity distributions are computed using a shock-physics code to model the explosions within the launch vehicle. A comparison of the debris catalog with an existing catalog for the Shuttle external tank show good comparison in the debris characteristics and the predicted debris strike probability. The model is used to analyze the effects of number of debris pieces and velocity distributions on the strike probability and risk.

The Physics of Boundary-Layer Aero-Optic Effects

DTIC Science & Technology

2012-09-01

various models to predict aero-optical effects for both subsonic and supersonic Mach numbers, laser beam sizes and non- adiabatic walls. The developed...models to predict aero-optical effects for both subsonic and supersonic Mach numbers, laser beam sizes and non- adiabatic walls. The developed models were... Supersonic Facilities .................................................................................................... 8 3.3 2-D Wavefront Data

Bayesian calibration for electrochemical thermal model of lithium-ion cells

NASA Astrophysics Data System (ADS)

Tagade, Piyush; Hariharan, Krishnan S.; Basu, Suman; Verma, Mohan Kumar Singh; Kolake, Subramanya Mayya; Song, Taewon; Oh, Dukjin; Yeo, Taejung; Doo, Seokgwang

2016-07-01

Pseudo-two dimensional electrochemical thermal (P2D-ECT) model contains many parameters that are difficult to evaluate experimentally. Estimation of these model parameters is challenging due to computational cost and the transient model. Due to lack of complete physical understanding, this issue gets aggravated at extreme conditions like low temperature (LT) operations. This paper presents a Bayesian calibration framework for estimation of the P2D-ECT model parameters. The framework uses a matrix variate Gaussian process representation to obtain a computationally tractable formulation for calibration of the transient model. Performance of the framework is investigated for calibration of the P2D-ECT model across a range of temperatures (333 Ksbnd 263 K) and operating protocols. In the absence of complete physical understanding, the framework also quantifies structural uncertainty in the calibrated model. This information is used by the framework to test validity of the new physical phenomena before incorporation in the model. This capability is demonstrated by introducing temperature dependence on Bruggeman's coefficient and lithium plating formation at LT. With the incorporation of new physics, the calibrated P2D-ECT model accurately predicts the cell voltage with high confidence. The accurate predictions are used to obtain new insights into the low temperature lithium ion cell behavior.

Job Demands and Job Resources as Predictors of Absence Duration and Frequency.

ERIC Educational Resources Information Center

Bakker, Arnold B.; Demerouti, Evangelia; de Boer, Elpine; Schaufeli, Wilmar B.

2003-01-01

Structural equation modeling of data from 214 employees indicated that job demands uniquely predicted burnout and indirectly predicted length of absence. Job resources (physical, psychological, social, or organizational aspects that reduce job demands or stimulate growth) uniquely predicted organizational commitment and indirectly predicted spells…

An Analysis on the Constitutive Models for Forging of Ti6Al4V Alloy Considering the Softening Behavior

NASA Astrophysics Data System (ADS)

Souza, Paul M.; Beladi, Hossein; Singh, Rajkumar P.; Hodgson, Peter D.; Rolfe, Bernard

2018-05-01

This paper developed high-temperature deformation constitutive models for a Ti6Al4V alloy using an empirical-based Arrhenius equation and an enhanced version of the authors' physical-based EM + Avrami equations. The initial microstructure was a partially equiaxed α + β grain structure. A wide range of experimental data was obtained from hot compression of the Ti6Al4 V alloy at deformation temperatures ranging from 720 to 970 °C, and at strain rates varying from 0.01 to 10 s-1. The friction- and adiabatic-corrected flow curves were used to identify the parameter values of the constitutive models. Both models provided good overall accuracy of the flow stress. The generalized modified Arrhenius model was better at predicting the flow stress at lower strain rates. However, the model was inaccurate in predicting the peak strain. In contrast, the enhanced physical-based EM + Avrami model revealed very good accuracy at intermediate and high strain rates, but it was also better at predicting the peak strain. Blind sample tests revealed that the EM + Avrami maintained good predictions on new (unseen) data. Thus, the enhanced EM + Avrami model may be preferred over the Arrhenius model to predict the flow behavior of Ti6Al4V alloy during industrial forgings, when the initial microstructure is partially equiaxed.

Intuitive Physics: Current Research and Controversies.

PubMed

Kubricht, James R; Holyoak, Keith J; Lu, Hongjing

2017-10-01

Early research in the field of intuitive physics provided extensive evidence that humans succumb to common misconceptions and biases when predicting, judging, and explaining activity in the physical world. Recent work has demonstrated that, across a diverse range of situations, some biases can be explained by the application of normative physical principles to noisy perceptual inputs. However, it remains unclear how knowledge of physical principles is learned, represented, and applied to novel situations. In this review we discuss theoretical advances from heuristic models to knowledge-based, probabilistic simulation models, as well as recent deep-learning models. We also consider how recent work may be reconciled with earlier findings that favored heuristic models. Copyright © 2017 Elsevier Ltd. All rights reserved.

Development of the physics driver in NOAA Environmental Modeling System (NEMS)

NASA Astrophysics Data System (ADS)

Lei, H.; Iredell, M.; Tripp, P.

2016-12-01

As a key component of the Next Generation Global Prediction System (NGGPS), a physics driver is developed in the NOAA Environmental Modeling System (NEMS) in order to facilitate the research, development, and transition to operations of innovations in atmospheric physical parameterizations. The physics driver connects the atmospheric dynamic core, the Common Community Physics Package and the other NEMS-based forecast components (land, ocean, sea ice, wave, and space weather). In current global forecasting system, the physics driver has incorporated major existing physics packages including radiation, surface physics, cloud and microphysics, ozone, and stochastic physics. The physics driver is also applicable to external physics packages. The structure adjustment in NEMS by separating the PHYS trunk is to create an open physics package pool. This open platform is beneficial to the enhancement of U.S. weather forecast ability. In addition, with the universal physics driver, the NEMS can also be used for specific functions by connecting external target physics packages through physics driver. The test of its function is to connect a physics dust-radiation model in the system. Then the modified system can be used for dust storm prediction and forecast. The physics driver is also developed into a standalone form. This is to facilitate the development works on physics packages. The developers can save instant fields of meteorology data and snapshots from the running system , and then used them as offline driving data fields to test the new individual physics modules or small modifications to current modules. This prevents the run of whole system for every test.

A multiscale strength model for tantalum over an extended range of strain rates

NASA Astrophysics Data System (ADS)

Barton, N. R.; Rhee, M.

2013-09-01

A strength model for tantalum is developed and exercised across a range of conditions relevant to various types of experimental observations. The model is based on previous multiscale modeling work combined with experimental observations. As such, the model's parameterization includes a hybrid of quantities that arise directly from predictive sub-scale physics models and quantities that are adjusted to align the model with experimental observations. Given current computing and experimental limitations, the response regions for sub-scale physics simulations and detailed experimental observations have been largely disjoint. In formulating the new model and presenting results here, attention is paid to integrated experimental observations that probe strength response at the elevated strain rates where a previous version of the model has generally been successful in predicting experimental data [Barton et al., J. Appl. Phys. 109(7), 073501 (2011)].

Validating a Model for Welding Induced Residual Stress Using High-Energy X-ray Diffraction

NASA Astrophysics Data System (ADS)

Mach, J. C.; Budrow, C. J.; Pagan, D. C.; Ruff, J. P. C.; Park, J.-S.; Okasinski, J.; Beaudoin, A. J.; Miller, M. P.

2017-05-01

Integrated computational materials engineering (ICME) provides a pathway to advance performance in structures through the use of physically-based models to better understand how manufacturing processes influence product performance. As one particular challenge, consider that residual stresses induced in fabrication are pervasive and directly impact the life of structures. For ICME to be an effective strategy, it is essential that predictive capability be developed in conjunction with critical experiments. In the present work, simulation results from a multi-physics model for gas metal arc welding are evaluated through x-ray diffraction using synchrotron radiation. A test component was designed with intent to develop significant gradients in residual stress, be representative of real-world engineering application, yet remain tractable for finely spaced strain measurements with positioning equipment available at synchrotron facilities. The experimental validation lends confidence to model predictions, facilitating the explicit consideration of residual stress distribution in prediction of fatigue life.

Motor Skill Competence and Perceived Motor Competence: Which Best Predicts Physical Activity among Girls?

PubMed

Khodaverdi, Zeinab; Bahram, Abbas; Khalaji, Hassan; Kazemnejad, Anoshirvan

2013-10-01

The main purpose of this study was to determine which correlate, perceived motor competence or motor skill competence, best predicts girls' physical activity behavior. A sample of 352 girls (mean age=8.7, SD=0.3 yr) participated in this study. To assess motor skill competence and perceived motor competence, each child completed the Test of Gross Motor Development-2 and Physical Ability sub-scale of Marsh's Self-Description Questionnaire. Children's physical activity was assessed by the Physical Activity Questionnaire for Older Children. Multiple linear regression model was used to determine whether perceived motor competence or motor skill competence best predicts moderate-to-vigorous self-report physical activity. Multiple regression analysis indicated that motor skill competence and perceived motor competence predicted 21% variance in physical activity (R(2)=0.21, F=48.9, P=0.001), and motor skill competence (R(2)=0.15, ᵝ=0.33, P= 0.001) resulted in more variance than perceived motor competence (R(2)=0.06, ᵝ=0.25, P=0.001) in physical activity. Results revealed motor skill competence had more influence in comparison with perceived motor competence on physical activity level. We suggest interventional programs based on motor skill competence and perceived motor competence should be administered or implemented to promote physical activity in young girls.

A Model to Predict Psychological- and Health-Related Adjustment in Men with Prostate Cancer: The Role of Post Traumatic Growth, Physical Post Traumatic Growth, Resilience and Mindfulness.

PubMed

Walsh, Deirdre M J; Morrison, Todd G; Conway, Ronan J; Rogers, Eamonn; Sullivan, Francis J; Groarke, AnnMarie

2018-01-01

Background: Post traumatic growth (PTG) can be defined as positive change following a traumatic event. The current conceptualization of PTG encompasses five main dimensions, however, there is no dimension which accounts for the distinct effect of a physical trauma on PTG. The purpose of the present research was to test the role of PTG, physical post traumatic growth (PPTG), resilience and mindfulness in predicting psychological and health related adjustment. Method: Ethical approval was obtained from relevant institutional ethics committees. Participants ( N = 241), who were at least 1 year post prostate cancer treatment, were invited to complete a battery of questionnaires either through an online survey or a paper and pencil package received in the post The sample ranged in age from 44 to 88 years ( M = 64.02, SD = 7.76). Data were analysis using confirmatory factor analysis and structural equation modeling. Results: The physical post traumatic growth inventory (P-PTGI) was used to evaluate the role of PPTG in predicting adjustment using structural equation modeling. P-PTGI predicted lower distress and improvement of quality of life, whereas conversely, the traditional PTG measure was linked with poor adjustment. The relationship between resilience and adjustment was found to be mediated by P-PTGI. Conclusion: Findings suggest the central role of PTG in the prostate cancer survivorship experience is enhanced by the inclusion of PPTG. Adjusting to a physical trauma such as illness (internal transgressor) is unlike a trauma with an external transgressor as the physical trauma creates an entirely different framework for adjustment. The current study demonstrates the impact of PPTG on adjustment. This significantly adds to the theory of the development of PTG by highlighting the interplay of resilience with PTG, PPTG, and adjustment.

Family Predictors of Continuity and Change in Social and Physical Aggression from Ages 9 – 18

PubMed Central

Ehrenreich, Samuel E.; Beron, Kurt J.; Brinkley, Dawn Y.; Underwood, Marion K.

2014-01-01

This research examined developmental trajectories for social and physical aggression for a sample followed from age 9–18, and investigated possible family predictors of following different trajectory groups. Participants were 158 girls and 138 boys, their teachers, and their parents (21% African American, 5.3% Asian, 51.6% Caucasian, and 21% Hispanic). Teachers rated children’s social and physical aggression yearly in grades 3–12. Participants’ parent (83% mothers) reported on family income, conflict strategies, and maternal authoritarian and permissive parenting styles. The results suggested that both social and physical aggression decline slightly from middle childhood through late adolescence. Using a dual trajectory model, group based mixture modeling revealed three trajectory groups for both social and physical aggression: low-, medium-, and high-desisting for social aggression, and stably-low, stably-medium, and high-desisting for physical aggression. Membership in higher trajectory groups was predicted by being from a single-parent family, and having a parent high on permissiveness. Being male was related to both elevated physical aggression trajectories and the medium-desisting social aggression trajectory. Negative interparental conflict strategies did not predict social or physical aggression trajectories when permissive parenting was included in the model. Permissive parenting in middle childhood predicted following higher social aggression trajectories across many years, which suggests that parents setting fewer limits on children’s behaviors may have lasting consequences for their peer relations. Future research should examine transactional relations between parenting styles and practices and aggression to understand the mechanisms that may contribute to changes in involvement in social and physical aggression across childhood and adolescence. PMID:24888340

Family predictors of continuity and change in social and physical aggression from ages 9 to 18.

PubMed

Ehrenreich, Samuel E; Beron, Kurt J; Brinkley, Dawn Y; Underwood, Marion K

2014-01-01

This research examined developmental trajectories for social and physical aggression for a sample followed from age 9 to 18, and investigated possible family predictors of following different trajectory groups. Participants were 158 girls and 138 boys, their teachers, and their parents (21% African American, 5.3% Asian, 51.6% Caucasian, and 21% Hispanic). Teachers rated children's social and physical aggression yearly in grades 3-12. Participants' parent (83% mothers) reported on family income, conflict strategies, and maternal authoritarian and permissive parenting styles. The results suggested that both social and physical aggression decline slightly from middle childhood through late adolescence. Using a dual trajectory model, group-based mixture modeling revealed three trajectory groups for both social and physical aggression: low-, medium-, and high-desisting for social aggression, and stably-low, stably-medium, and high-desisting for physical aggression. Membership in higher trajectory groups was predicted by being from a single-parent family, and having a parent high on permissiveness. Being male was related to both elevated physical aggression trajectories and the medium-desisting social aggression trajectory. Negative interparental conflict strategies did not predict social or physical aggression trajectories when permissive parenting was included in the model. Permissive parenting in middle childhood predicted following higher social aggression trajectories across many years, which suggests that parents setting fewer limits on children's behaviors may have lasting consequences for their peer relations. Future research should examine transactional relations between parenting styles and practices and aggression to understand the mechanisms that may contribute to changes in involvement in social and physical aggression across childhood and adolescence. © 2014 Wiley Periodicals, Inc.

Specification of the Surface Charging Environment with SHIELDS

NASA Astrophysics Data System (ADS)

Jordanova, V.; Delzanno, G. L.; Henderson, M. G.; Godinez, H. C.; Jeffery, C. A.; Lawrence, E. C.; Meierbachtol, C.; Moulton, J. D.; Vernon, L.; Woodroffe, J. R.; Brito, T.; Toth, G.; Welling, D. T.; Yu, Y.; Albert, J.; Birn, J.; Borovsky, J.; Denton, M.; Horne, R. B.; Lemon, C.; Markidis, S.; Thomsen, M. F.; Young, S. L.

2016-12-01

Predicting variations in the near-Earth space environment that can lead to spacecraft damage and failure, i.e. "space weather", remains a big space physics challenge. A recently funded project through the Los Alamos National Laboratory (LANL) Directed Research and Development (LDRD) program aims at developing a new capability to understand, model, and predict Space Hazards Induced near Earth by Large Dynamic Storms, the SHIELDS framework. The project goals are to understand the dynamics of the surface charging environment (SCE), the hot (keV) electrons representing the source and seed populations for the radiation belts, on both macro- and microscale. Important physics questions related to rapid particle injection and acceleration associated with magnetospheric storms and substorms as well as plasma waves are investigated. These challenging problems are addressed using a team of world-class experts in the fields of space science and computational plasma physics, and state-of-the-art models and computational facilities. In addition to physics-based models (like RAM-SCB, BATS-R-US, and iPIC3D), new data assimilation techniques employing data from LANL instruments on the Van Allen Probes and geosynchronous satellites are developed. Simulations with the SHIELDS framework of the near-Earth space environment where operational satellites reside are presented. Further model development and the organization of a "Spacecraft Charging Environment Challenge" by the SHIELDS project at LANL in collaboration with the NSF Geospace Environment Modeling (GEM) Workshop and the multi-agency Community Coordinated Modeling Center (CCMC) to assess the accuracy of SCE predictions are discussed.

The Effect of Nondeterministic Parameters on Shock-Associated Noise Prediction Modeling

NASA Technical Reports Server (NTRS)

Dahl, Milo D.; Khavaran, Abbas

2010-01-01

Engineering applications for aircraft noise prediction contain models for physical phenomenon that enable solutions to be computed quickly. These models contain parameters that have an uncertainty not accounted for in the solution. To include uncertainty in the solution, nondeterministic computational methods are applied. Using prediction models for supersonic jet broadband shock-associated noise, fixed model parameters are replaced by probability distributions to illustrate one of these methods. The results show the impact of using nondeterministic parameters both on estimating the model output uncertainty and on the model spectral level prediction. In addition, a global sensitivity analysis is used to determine the influence of the model parameters on the output, and to identify the parameters with the least influence on model output.

The Theory of Planned Behavior within the Stages of the Transtheoretical Model: Latent Structural Modeling of Stage-Specific Prediction Patterns in Physical Activity

ERIC Educational Resources Information Center

Lippke, Sonia; Nigg, Claudio R.; Maddock, Jay E.

2007-01-01

This is the first study to test whether the stages of change of the transtheoretical model are qualitatively different through exploring discontinuity patterns in theory of planned behavior (TPB) variables using latent multigroup structural equation modeling (MSEM) with AMOS. Discontinuity patterns in terms of latent means and prediction patterns…

VLP Simulation: An Interactive Simple Virtual Model to Encourage Geoscience Skill about Volcano

NASA Astrophysics Data System (ADS)

Hariyono, E.; Liliasari; Tjasyono, B.; Rosdiana, D.

2017-09-01

The purpose of this study was to describe physics students predicting skills after following the geoscience learning using VLP (Volcano Learning Project) simulation. This research was conducted to 24 physics students at one of the state university in East Java-Indonesia. The method used is the descriptive analysis based on students’ answers related to predicting skills about volcanic activity. The results showed that the learning by using VLP simulation was very potential to develop physics students predicting skills. Students were able to explain logically about volcanic activity and they have been able to predict the potential eruption that will occur based on the real data visualization. It can be concluded that the VLP simulation is very suitable for physics student requirements in developing geosciences skill and recommended as an alternative media to educate the society in an understanding of volcanic phenomena.

A wave model test bed study for wave energy resource characterization

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yang, Zhaoqing; Neary, Vincent S.; Wang, Taiping

This paper presents a test bed study conducted to evaluate best practices in wave modeling to characterize energy resources. The model test bed off the central Oregon Coast was selected because of the high wave energy and available measured data at the site. Two third-generation spectral wave models, SWAN and WWIII, were evaluated. A four-level nested-grid approach—from global to test bed scale—was employed. Model skills were assessed using a set of model performance metrics based on comparing six simulated wave resource parameters to observations from a wave buoy inside the test bed. Both WWIII and SWAN performed well at themore » test bed site and exhibited similar modeling skills. The ST4 package with WWIII, which represents better physics for wave growth and dissipation, out-performed ST2 physics and improved wave power density and significant wave height predictions. However, ST4 physics tended to overpredict the wave energy period. The newly developed ST6 physics did not improve the overall model skill for predicting the six wave resource parameters. Sensitivity analysis using different wave frequencies and direction resolutions indicated the model results were not sensitive to spectral resolutions at the test bed site, likely due to the absence of complex bathymetric and geometric features.« less

Associations of physical activity and sedentary behaviour with metabolic syndrome in rural Australian adults.

PubMed

Mitchell, Braden L; Smith, Ashleigh E; Rowlands, Alex V; Parfitt, Gaynor; Dollman, James

2018-05-22

Associations between objectively measured sedentary behaviour, physical activity (PA) and metabolic syndrome (MetS)-classified using three different definitions were investigated in an inactive sample of rural Australian adults. Quantitative, cross-sectional. 171 adults (50.7±12.4years) from two rural South Australian regions underwent seven-day accelerometer activity monitoring and MetS classification using the National Cholesterol Education Program, the International Diabetes Federation and the Harmonized definitions. Associations between sedentary and activity variables and MetS (adjusted for age, sex, diet and smoking status) were modelled using logistic regression. In secondary modelling, associations of sedentary and activity outcomes for each MetS definition were assessed, adjusting for other activity and sedentary variables. Prediction differences across the definitions of MetS were directly compared using Akaike's Information Criterion. Sedentary behaviour increased MetS risk, whereas light physical activity (LPA) and moderate-to-vigorous physical activity (MVPA) reduced MetS risk, irrespective of definition. In secondary models, LPA predicted MetS independently of MVPA and total sedentary time. Time spent in sedentary bouts (>30min) predicted MetS independently of MVPA and the number of sedentary bouts predicted MetS independently of LPA and MVPA. Prediction differences for MetS definitions failed to reach the critical threshold for difference (>10). This study highlights the importance of sedentary behaviour and LPA on the prevalence of MetS in an inactive sample of rural Australian adults. Studies assessing the efficacy of increasing LPA on MetS in this population are needed. Minimal predictive differences across the three MetS definitions suggest evidence from previous studies can be considered cumulative. Copyright © 2018 Sports Medicine Australia. Published by Elsevier Ltd. All rights reserved.

An Expectancy-Value Model for Sustained Enrolment Intentions of Senior Secondary Physics Students

ERIC Educational Resources Information Center

Abraham, Jessy; Barker, Katrina

2015-01-01

This study investigates the predictive influences of achievement motivational variables that may sustain students' engagement in physics and influence their future enrolment plans in the subject. Unlike most studies attempting to address the decline of physics enrolments through capturing students' intention to enrol in physics before ever…

Relations of Gender and Socioeconomic Status to Physics through Metacognition and Self-Efficacy

ERIC Educational Resources Information Center

Yerdelen-Damar, Sevda; Pesman, Haki

2013-01-01

The authors explored how gender and socioeconomic status (SES) predicted physics achievement as mediated by metacognition and physics self-efficacy. Data were collected from 338 high school students. The model designed for exploring how gender and SES-related differences in physics achievement were explained through metacognition and physics…

Who will have Sustainable Employment After a Back Injury? The Development of a Clinical Prediction Model in a Cohort of Injured Workers.

PubMed

Shearer, Heather M; Côté, Pierre; Boyle, Eleanor; Hayden, Jill A; Frank, John; Johnson, William G

2017-09-01

Purpose Our objective was to develop a clinical prediction model to identify workers with sustainable employment following an episode of work-related low back pain (LBP). Methods We used data from a cohort study of injured workers with incident LBP claims in the USA to predict employment patterns 1 and 6 months following a workers' compensation claim. We developed three sequential models to determine the contribution of three domains of variables: (1) basic demographic/clinical variables; (2) health-related variables; and (3) work-related factors. Multivariable logistic regression was used to develop the predictive models. We constructed receiver operator curves and used the c-index to measure predictive accuracy. Results Seventy-nine percent and 77 % of workers had sustainable employment at 1 and 6 months, respectively. Sustainable employment at 1 month was predicted by initial back pain intensity, mental health-related quality of life, claim litigation and employer type (c-index = 0.77). At 6 months, sustainable employment was predicted by physical and mental health-related quality of life, claim litigation and employer type (c-index = 0.77). Adding health-related and work-related variables to models improved predictive accuracy by 8.5 and 10 % at 1 and 6 months respectively. Conclusion We developed clinically-relevant models to predict sustainable employment in injured workers who made a workers' compensation claim for LBP. Inquiring about back pain intensity, physical and mental health-related quality of life, claim litigation and employer type may be beneficial in developing programs of care. Our models need to be validated in other populations.

Prediction of AL and Dst Indices from ACE Measurements Using Hybrid Physics/Black-Box Techniques

NASA Astrophysics Data System (ADS)

Spencer, E.; Rao, A.; Horton, W.; Mays, L.

2008-12-01

ACE measurements of the solar wind velocity, IMF and proton density is used to drive a hybrid Physics/Black- Box model of the nightside magnetosphere. The core physics is contained in a low order nonlinear dynamical model of the nightside magnetosphere called WINDMI. The model is augmented by wavelet based nonlinear mappings between the solar wind quantities and the input into the physics model, followed by further wavelet based mappings of the model output field aligned currents onto the ground based magnetometer measurements of the AL index and Dst index. The black box mappings are introduced at the input stage to account for uncertainties in the way the solar wind quantities are transported from the ACE spacecraft at L1 to the magnetopause. Similar mappings are introduced at the output stage to account for a spatially and temporally varying westward auroral electrojet geometry. The parameters of the model are tuned using a genetic algorithm, and trained using the large geomagnetic storm dataset of October 3-7 2000. It's predictive performance is then evaluated on subsequent storm datasets, in particular the April 15-24 2002 storm. This work is supported by grant NSF 7020201

Nonlinear ARMA models for the D(st) index and their physical interpretation

NASA Technical Reports Server (NTRS)

Vassiliadis, D.; Klimas, A. J.; Baker, D. N.

1996-01-01

Time series models successfully reproduce or predict geomagnetic activity indices from solar wind parameters. A method is presented that converts a type of nonlinear filter, the nonlinear Autoregressive Moving Average (ARMA) model to the nonlinear damped oscillator physical model. The oscillator parameters, the growth and decay, the oscillation frequencies and the coupling strength to the input are derived from the filter coefficients. Mathematical methods are derived to obtain unique and consistent filter coefficients while keeping the prediction error low. These methods are applied to an oscillator model for the Dst geomagnetic index driven by the solar wind input. A data set is examined in two ways: the model parameters are calculated as averages over short time intervals, and a nonlinear ARMA model is calculated and the model parameters are derived as a function of the phase space.

A Novel Model for Predicting Rehospitalization Risk Incorporating Physical Function, Cognitive Status, and Psychosocial Support Using Natural Language Processing.

PubMed

Greenwald, Jeffrey L; Cronin, Patrick R; Carballo, Victoria; Danaei, Goodarz; Choy, Garry

2017-03-01

With the increasing focus on reducing hospital readmissions in the United States, numerous readmissions risk prediction models have been proposed, mostly developed through analyses of structured data fields in electronic medical records and administrative databases. Three areas that may have an impact on readmission but are poorly captured using structured data sources are patients' physical function, cognitive status, and psychosocial environment and support. The objective of the study was to build a discriminative model using information germane to these 3 areas to identify hospitalized patients' risk for 30-day all cause readmissions. We conducted clinician focus groups to identify language used in the clinical record regarding these 3 areas. We then created a dataset including 30,000 inpatients, 10,000 from each of 3 hospitals, and searched those records for the focus group-derived language using natural language processing. A 30-day readmission prediction model was developed on 75% of the dataset and validated on the other 25% and also on hospital specific subsets. Focus group language was aggregated into 35 variables. The final model had 16 variables, a validated C-statistic of 0.74, and was well calibrated. Subset validation of the model by hospital yielded C-statistics of 0.70-0.75. Deriving a 30-day readmission risk prediction model through identification of physical, cognitive, and psychosocial issues using natural language processing yielded a model that performs similarly to the better performing models previously published with the added advantage of being based on clinically relevant factors and also automated and scalable. Because of the clinical relevance of the variables in the model, future research may be able to test if targeting interventions to identified risks results in reductions in readmissions.

Physics Guided Data Science in the Earth Sciences

NASA Astrophysics Data System (ADS)

Ganguly, A. R.

2017-12-01

Even as the geosciences are becoming relatively data-rich owing to remote sensing and archived model simulations, established physical understanding and process knowledge cannot be ignored. The ability to leverage both physics and data-intensive sciences may lead to new discoveries and predictive insights. A principled approach to physics guided data science, where physics informs feature selection, output constraints, and even the architecture of the learning models, is motivated. The possibility of hybrid physics and data science models at the level of component processes is discussed. The challenges and opportunities, as well as the relations to other approaches such as data assimilation - which also bring physics and data together - are discussed. Case studies are presented in climate, hydrology and meteorology.

Modeling coherent errors in quantum error correction

NASA Astrophysics Data System (ADS)

Greenbaum, Daniel; Dutton, Zachary

2018-01-01

Analysis of quantum error correcting codes is typically done using a stochastic, Pauli channel error model for describing the noise on physical qubits. However, it was recently found that coherent errors (systematic rotations) on physical data qubits result in both physical and logical error rates that differ significantly from those predicted by a Pauli model. Here we examine the accuracy of the Pauli approximation for noise containing coherent errors (characterized by a rotation angle ɛ) under the repetition code. We derive an analytic expression for the logical error channel as a function of arbitrary code distance d and concatenation level n, in the small error limit. We find that coherent physical errors result in logical errors that are partially coherent and therefore non-Pauli. However, the coherent part of the logical error is negligible at fewer than {ε }-({dn-1)} error correction cycles when the decoder is optimized for independent Pauli errors, thus providing a regime of validity for the Pauli approximation. Above this number of correction cycles, the persistent coherent logical error will cause logical failure more quickly than the Pauli model would predict, and this may need to be combated with coherent suppression methods at the physical level or larger codes.

FY17 Status Report on the Micromechanical Finite Element Modeling of Creep Fracture of Grade 91 Steel

DOE Office of Scientific and Technical Information (OSTI.GOV)

Messner, M. C.; Truster, T. J.; Cochran, K. B.

Advanced reactors designed to operate at higher temperatures than current light water reactors require structural materials with high creep strength and creep-fatigue resistance to achieve long design lives. Grade 91 is a ferritic/martensitic steel designed for long creep life at elevated temperatures. It has been selected as a candidate material for sodium fast reactor intermediate heat exchangers and other advanced reactor structural components. This report focuses on the creep deformation and rupture life of Grade 91 steel. The time required to complete an experiment limits the availability of long-life creep data for Grade 91 and other structural materials. Design methodsmore » often extrapolate the available shorter-term experimental data to longer design lives. However, extrapolation methods tacitly assume the underlying material mechanisms causing creep for long-life/low-stress conditions are the same as the mechanisms controlling creep in the short-life/high-stress experiments. A change in mechanism for long-term creep could cause design methods based on extrapolation to be non-conservative. The goal for physically-based microstructural models is to accurately predict material response in experimentally-inaccessible regions of design space. An accurate physically-based model for creep represents all the material mechanisms that contribute to creep deformation and damage and predicts the relative influence of each mechanism, which changes with loading conditions. Ideally, the individual mechanism models adhere to the material physics and not an empirical calibration to experimental data and so the model remains predictive for a wider range of loading conditions. This report describes such a physically-based microstructural model for Grade 91 at 600° C. The model explicitly represents competing dislocation and diffusional mechanisms in both the grain bulk and grain boundaries. The model accurately recovers the available experimental creep curves at higher stresses and the limited experimental data at lower stresses, predominately primary creep rates. The current model considers only one temperature. However, because the model parameters are, for the most part, directly related to the physics of fundamental material processes, the temperature dependence of the properties are known. Therefore, temperature dependence can be included in the model with limited additional effort. The model predicts a mechanism shift for 600° C at approximately 100 MPa from a dislocation- dominated regime at higher stress to a diffusion-dominated regime at lower stress. This mechanism shift impacts the creep life, notch-sensitivity, and, likely, creep ductility of Grade 91. In particular, the model predicts existing extrapolation methods for creep life may be non-conservative when attempting to extrapolate data for higher stress creep tests to low stress, long-life conditions. Furthermore, the model predicts a transition from notchstrengthening behavior at high stress to notch-weakening behavior at lower stresses. Both behaviors may affect the conservatism of existing design methods.« less

Spacecraft-environment interaction model cross comparison applied to Solar Probe Plus

NASA Astrophysics Data System (ADS)

Lapenta, G.; Deca, J.; Markidis, S.; Marchand, R.; Guillemant, S.; Matéo Vélez, J.; Miyake, Y.; Usui, H.; Ergun, R.; Sturner, A. P.

2013-12-01

Given that our society becomes increasingly dependent on space technology, it is imperative to develop a good understanding of spacecraft-plasma interactions. Two main issues are important. First, one needs to be able to design a reliable spacecraft that can survive in the harsh solar wind conditions, and second a very good knowledge of the behaviour and plasma structure around the spacecraft is required to be able to interpret and correct measurements from onboard instruments and science experiments. In this work we present the results of a cross-comparison study between five spacecraft-plasma models (EMSES, iPic3D, LASP, PTetra, SPIS) used to simulate the interaction of the Solar Probe Plus (SPP) satellite with the space environment under representative solar wind conditions near perihelion. The purpose of this cross-comparison is to assess the consistency and validity of the different numerical approaches from the similarities and differences of their predictions under well defined conditions, with attention to the implicit PIC code iPic3D, which has never been used for spacecraft-environment interaction studies before. The physical effects considered are spacecraft charging, photoelectron and secondary electron emission, the presence of a background magnetic field and density variations. The latter of which can cause the floating potential of SPP to go from negative to positive or visa versa, depending on the solar wind conditions, and spacecraft material properties. Simulation results are presented and compared with increasing levels of complexity in the physics to evaluate the sensitivity of the model predictions to certain physical effects. The comparisons focus particularly on spacecraft floating potential, detailed contributions to the currents collected and emitted by the spacecraft, and on the potential and density spatial profiles near the satellite. Model predictions obtained with our different computational approaches are found to be in good agreement when the physical processes are treated similarly. The comparisons considered here indicate that, with the correct parameterization of important physical effects such as photoemission and secondary electron emission, our simulation models should have the required skill to predict details of satellite-plasma interaction physics with a high level of confidence. This work was supported by the International Space Science Institute in Bern Switzerland. The potential profile around the Solar Probe Plus spacecraft in orbital flow, from the iPic3D code. The physical model includes photo- and secondary electrons and a static magnetic field.

Integrated Social- and Neurocognitive Model of Physical Activity Behavior in Older Adults with Metabolic Disease.

PubMed

Olson, Erin A; Mullen, Sean P; Raine, Lauren B; Kramer, Arthur F; Hillman, Charles H; McAuley, Edward

2017-04-01

Despite the proven benefits of physical activity to treat and prevent metabolic diseases, such as diabetes (T2D) and metabolic syndrome (MetS), most individuals with metabolic disease do not meet physical activity (PA) recommendations. PA is a complex behavior requiring substantial motivational and cognitive resources. The purpose of this study was to examine social cognitive and neuropsychological determinants of PA behavior in older adults with T2D and MetS. The hypothesized model theorized that baseline self-regulatory strategy use and cognitive function would indirectly influence PA through self-efficacy. Older adults with T2D or MetS (M age  = 61.8 ± 6.4) completed either an 8-week physical activity intervention (n = 58) or an online metabolic health education course (n = 58) and a follow-up at 6 months. Measures included cognitive function, self-efficacy, self-regulatory strategy use, and PA. The data partially supported the hypothesized model (χ 2  = 158.535(131), p > .05, comparative fit index = .96, root mean square error of approximation = .04, standardized root mean square residual = .06) with self-regulatory strategy use directly predicting self-efficacy (β = .33, p < .05), which in turn predicted PA (β = .21, p < .05). Performance on various cognitive function tasks predicted PA directly and indirectly via self-efficacy. Baseline physical activity (β = .62, p < .01) and intervention group assignment via self-efficacy (β = -.20, p < .05) predicted follow-up PA. The model accounted for 54.4 % of the variance in PA at month 6. Findings partially support the hypothesized model and indicate that select cognitive functions (i.e., working memory, inhibition, attention, and task-switching) predicted PA behavior 6 months later. Future research warrants the development of interventions targeting cognitive function, self-regulatory skill development, and self-efficacy enhancement. The trial was registered with the clinical trial number NCT01790724.

Higher Education Planning and Budgeting: Ideas for the 80s. Contributed Papers for an NCHEMS Competition on State and Institute Financing.

ERIC Educational Resources Information Center

Christal, Melodie E., Ed.

Practitioner papers and research papers on higher education planning and budgeting are presented. "Before the Roof Caves In: A Predictive Model for Physical Plant Renewal" by Frederick M. Biedenweg and Robert E. Hutson outlines a systematic approach that was used at Stanford University to predict the associated costs of physical plant…

Using Machine Learning as a fast emulator of physical processes within the Met Office's Unified Model

NASA Astrophysics Data System (ADS)

Prudden, R.; Arribas, A.; Tomlinson, J.; Robinson, N.

2017-12-01

The Unified Model is a numerical model of the atmosphere used at the UK Met Office (and numerous partner organisations including Korean Meteorological Agency, Australian Bureau of Meteorology and US Air Force) for both weather and climate applications.Especifically, dynamical models such as the Unified Model are now a central part of weather forecasting. Starting from basic physical laws, these models make it possible to predict events such as storms before they have even begun to form. The Unified Model can be simply described as having two components: one component solves the navier-stokes equations (usually referred to as the "dynamics"); the other solves relevant sub-grid physical processes (usually referred to as the "physics"). Running weather forecasts requires substantial computing resources - for example, the UK Met Office operates the largest operational High Performance Computer in Europe - and the cost of a typical simulation is spent roughly 50% in the "dynamics" and 50% in the "physics". Therefore there is a high incentive to reduce cost of weather forecasts and Machine Learning is a possible option because, once a machine learning model has been trained, it is often much faster to run than a full simulation. This is the motivation for a technique called model emulation, the idea being to build a fast statistical model which closely approximates a far more expensive simulation. In this paper we discuss the use of Machine Learning as an emulator to replace the "physics" component of the Unified Model. Various approaches and options will be presented and the implications for further model development, operational running of forecasting systems, development of data assimilation schemes, and development of ensemble prediction techniques will be discussed.

Patterns and predictors of father-infant engagement across race/ethnic groups

PubMed Central

Cabrera, Natasha J.; Hofferth, Sandra L.; Chae, Soo

2011-01-01

This study examines whether levels of father engagement (e.g., verbal stimulation, caregiving, and physical play) vary by race/ethnicity using a model that controls for fathers’ human capital, mental health, and family relationships. It also tests whether the models work similarly across race/ethnic groups. Its sample of N=5,089 infants and their families is drawn from the Early Childhood Longitudinal Study – Birth Cohort (ECLS-B). We found that, after including controls, African American and Latino fathers had higher levels of engagement in caregiving and physical play activities than White fathers. There were no differences in verbal stimulation activities across race/ethnicity. Fathers’ education (college level) predicted more verbally stimulating activities whereas fathers’ report of couple conflict predicted less caregiving and physical play. Although levels of engagement differed across the groups, the overall models did not differ by race/ethnicity, except for physical play. African American mothers who reported high levels of depressive symptoms had partners who engaged in more physical play than White mothers with high levels of depressive symptoms. PMID:22110258

Stochastic Spatial Models in Ecology: A Statistical Physics Approach

NASA Astrophysics Data System (ADS)

Pigolotti, Simone; Cencini, Massimo; Molina, Daniel; Muñoz, Miguel A.

2018-07-01

Ecosystems display a complex spatial organization. Ecologists have long tried to characterize them by looking at how different measures of biodiversity change across spatial scales. Ecological neutral theory has provided simple predictions accounting for general empirical patterns in communities of competing species. However, while neutral theory in well-mixed ecosystems is mathematically well understood, spatial models still present several open problems, limiting the quantitative understanding of spatial biodiversity. In this review, we discuss the state of the art in spatial neutral theory. We emphasize the connection between spatial ecological models and the physics of non-equilibrium phase transitions and how concepts developed in statistical physics translate in population dynamics, and vice versa. We focus on non-trivial scaling laws arising at the critical dimension D = 2 of spatial neutral models, and their relevance for biological populations inhabiting two-dimensional environments. We conclude by discussing models incorporating non-neutral effects in the form of spatial and temporal disorder, and analyze how their predictions deviate from those of purely neutral theories.

Stochastic Spatial Models in Ecology: A Statistical Physics Approach

NASA Astrophysics Data System (ADS)

Pigolotti, Simone; Cencini, Massimo; Molina, Daniel; Muñoz, Miguel A.

2017-11-01

Ecosystems display a complex spatial organization. Ecologists have long tried to characterize them by looking at how different measures of biodiversity change across spatial scales. Ecological neutral theory has provided simple predictions accounting for general empirical patterns in communities of competing species. However, while neutral theory in well-mixed ecosystems is mathematically well understood, spatial models still present several open problems, limiting the quantitative understanding of spatial biodiversity. In this review, we discuss the state of the art in spatial neutral theory. We emphasize the connection between spatial ecological models and the physics of non-equilibrium phase transitions and how concepts developed in statistical physics translate in population dynamics, and vice versa. We focus on non-trivial scaling laws arising at the critical dimension D = 2 of spatial neutral models, and their relevance for biological populations inhabiting two-dimensional environments. We conclude by discussing models incorporating non-neutral effects in the form of spatial and temporal disorder, and analyze how their predictions deviate from those of purely neutral theories.

A Cause and A Solution for the Underprediction of Extreme Wave Events in the Northeast Pacific

NASA Astrophysics Data System (ADS)

Ellenson, A. N.; Ozkan-Haller, H. T.; Thomson, J.; Brown, A. C.; Haller, M. C.

2016-12-01

Along the coastlines of Washington and Oregon, at least one 10 m wave height event occurs every year, and the strongest storms produce wave heights of 14-15 m. Extremely high wave heights can cause severe damage to coastal infrastructure and pose hazards to stakeholders along the coast. A system which can accurately predict such sea states is important for quantifying risk and aiding in preparation for extreme wave events. This study explores how to optimize forecast model performance for extreme wave events by utilizing different physics packages or wind input in four model configurations. The different wind input products consist of a reanalyzed Global Forecasting System (GFS) wind input and a Climate Forecast System Reanalysis (CFSR) from the National Center of Environmental Prediction (NCEP). The physics packages are the Tolman-Chalikov (1996) ST2 physics package and the Ardhuin et al (2009) ST4 physics package associated with version 4.18 of WaveWatch III. A hindcast was previously performed to assess the wave character along the Pacific Northwest Coastline for wave energy applications. Inspection of hindcast model results showed that the operational model, which consisted of ST2 physics and GFS wind, underpredicted events where wave height exceeded six meters.The under-prediction is most severe for cases with the combined conditions of a distant cyclone and a strong coastal jet. Three such cases were re-analyzed with the four model configurations. Model output is compared with observations at NDBC buoy 46050, offshore of Newport, OR. The model configuration consisting of ST4 physics package and CFSR wind input performs best as compared with the original model, reducing significant wave height underprediction from 1.25 m to approximately 0.67 m and mean wave direction error from 30 degrees to 17 degrees for wave heights greater than 6 m. Spectral analysis shows that the ST4-CFSR model configuration best resolves southerly wave energy, and all model configurations tend to overestimate northerly wave energy. This directional distinction is important when attempting to identify which atmospheric feature has induced the extreme wave energy.

Simplified Physics Based Models Research Topical Report on Task #2

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mishra, Srikanta; Ganesh, Priya

We present a simplified-physics based approach, where only the most important physical processes are modeled, to develop and validate simplified predictive models of CO2 sequestration in deep saline formation. The system of interest is a single vertical well injecting supercritical CO2 into a 2-D layered reservoir-caprock system with variable layer permeabilities. We use a set of well-designed full-physics compositional simulations to understand key processes and parameters affecting pressure propagation and buoyant plume migration. Based on these simulations, we have developed correlations for dimensionless injectivity as a function of the slope of fractional-flow curve, variance of layer permeability values, and themore » nature of vertical permeability arrangement. The same variables, along with a modified gravity number, can be used to develop a correlation for the total storage efficiency within the CO2 plume footprint. Similar correlations are also developed to predict the average pressure within the injection reservoir, and the pressure buildup within the caprock.« less

Predictors of regular cigarette smoking among adolescent females: Does body image matter?

PubMed Central

Kaufman, Annette R.; Augustson, Erik M.

2013-01-01

This study examined how factors associated with body image predict regular smoking in adolescent females. Data were from the National Longitudinal Study of Adolescent Health (Add Health), a study of health-related behaviors in a nationally representative sample of adolescents in grades 7 through 12. Females in Waves I and II (n=6,956) were used for this study. Using SUDAAN to adjust for the sampling frame, univariate and multivariate analyses were performed to investigate if baseline body image factors, including perceived weight, perceived physical development, trying to lose weight, and self-esteem, were predictive of regular smoking status 1 year later. In univariate analyses, perceived weight (p<.01), perceived physical development (p<.0001), trying to lose weight (p<.05), and self-esteem (p<.0001) significantly predicted regular smoking 1 year later. In the logistic regression model, perceived physical development (p<.05), and self-esteem (p<.001) significantly predicted regular smoking. The more developed a female reported being in comparison to other females her age, the more likely she was to be a regular smoker. Lower self-esteem was predictive of regular smoking. Perceived weight and trying to lose weight failed to reach statistical significance in the multivariate model. This current study highlights the importance of perceived physical development and self-esteem when predicting regular smoking in adolescent females. Efforts to promote positive self-esteem in young females may be an important strategy when creating interventions to reduce regular cigarette smoking. PMID:18686177

Polymer physics predicts the effects of structural variants on chromatin architecture.

PubMed

Bianco, Simona; Lupiáñez, Darío G; Chiariello, Andrea M; Annunziatella, Carlo; Kraft, Katerina; Schöpflin, Robert; Wittler, Lars; Andrey, Guillaume; Vingron, Martin; Pombo, Ana; Mundlos, Stefan; Nicodemi, Mario

2018-05-01

Structural variants (SVs) can result in changes in gene expression due to abnormal chromatin folding and cause disease. However, the prediction of such effects remains a challenge. Here we present a polymer-physics-based approach (PRISMR) to model 3D chromatin folding and to predict enhancer-promoter contacts. PRISMR predicts higher-order chromatin structure from genome-wide chromosome conformation capture (Hi-C) data. Using the EPHA4 locus as a model, the effects of pathogenic SVs are predicted in silico and compared to Hi-C data generated from mouse limb buds and patient-derived fibroblasts. PRISMR deconvolves the folding complexity of the EPHA4 locus and identifies SV-induced ectopic contacts and alterations of 3D genome organization in homozygous or heterozygous states. We show that SVs can reconfigure topologically associating domains, thereby producing extensive rewiring of regulatory interactions and causing disease by gene misexpression. PRISMR can be used to predict interactions in silico, thereby providing a tool for analyzing the disease-causing potential of SVs.

The Trans-Contextual Model: Perceived Learning and Performance Motivational Climates as Analogues of Perceived Autonomy Support

ERIC Educational Resources Information Center

Barkoukis, Vassilis; Hagger, Martin S.

2013-01-01

The trans-contextual model of motivation (TCM) proposes that perceived autonomy support in physical education (PE) predicts autonomous motivation within this context, which, in turn, is related to autonomous motivation and physical activity in leisure-time. According to achievement goal theory perceptions of learning and performance, motivational…

Inhibitors to Responsibility-Based Professional Development with In-Service Teachers

ERIC Educational Resources Information Center

Hemphill, Michael A.

2015-01-01

Researchers of continuing professional development (CPD) in physical education have called for new models that move beyond the traditional CPD model. The outcomes of CPD protocols are hard to predict even when they align with the best practices. Responsibility-based CPD has become the focus of recent attention to assist physical educators in…

A predictive estimation method for carbon dioxide transport by data-driven modeling with a physically-based data model

NASA Astrophysics Data System (ADS)

Jeong, Jina; Park, Eungyu; Han, Weon Shik; Kim, Kue-Young; Jun, Seong-Chun; Choung, Sungwook; Yun, Seong-Taek; Oh, Junho; Kim, Hyun-Jun

2017-11-01

In this study, a data-driven method for predicting CO2 leaks and associated concentrations from geological CO2 sequestration is developed. Several candidate models are compared based on their reproducibility and predictive capability for CO2 concentration measurements from the Environment Impact Evaluation Test (EIT) site in Korea. Based on the data mining results, a one-dimensional solution of the advective-dispersive equation for steady flow (i.e., Ogata-Banks solution) is found to be most representative for the test data, and this model is adopted as the data model for the developed method. In the validation step, the method is applied to estimate future CO2 concentrations with the reference estimation by the Ogata-Banks solution, where a part of earlier data is used as the training dataset. From the analysis, it is found that the ensemble mean of multiple estimations based on the developed method shows high prediction accuracy relative to the reference estimation. In addition, the majority of the data to be predicted are included in the proposed quantile interval, which suggests adequate representation of the uncertainty by the developed method. Therefore, the incorporation of a reasonable physically-based data model enhances the prediction capability of the data-driven model. The proposed method is not confined to estimations of CO2 concentration and may be applied to various real-time monitoring data from subsurface sites to develop automated control, management or decision-making systems.

Failure Models and Criteria for FRP Under In-Plane or Three-Dimensional Stress States Including Shear Non-Linearity

NASA Technical Reports Server (NTRS)

Pinho, Silvestre T.; Davila, C. G.; Camanho, P. P.; Iannucci, L.; Robinson, P.

2005-01-01

A set of three-dimensional failure criteria for laminated fiber-reinforced composites, denoted LaRC04, is proposed. The criteria are based on physical models for each failure mode and take into consideration non-linear matrix shear behaviour. The model for matrix compressive failure is based on the Mohr-Coulomb criterion and it predicts the fracture angle. Fiber kinking is triggered by an initial fiber misalignment angle and by the rotation of the fibers during compressive loading. The plane of fiber kinking is predicted by the model. LaRC04 consists of 6 expressions that can be used directly for design purposes. Several applications involving a broad range of load combinations are presented and compared to experimental data and other existing criteria. Predictions using LaRC04 correlate well with the experimental data, arguably better than most existing criteria. The good correlation seems to be attributable to the physical soundness of the underlying failure models.

Data Assimilation - Advances and Applications

DOE Office of Scientific and Technical Information (OSTI.GOV)

Williams, Brian J.

2014-07-30

This presentation provides an overview of data assimilation (model calibration) for complex computer experiments. Calibration refers to the process of probabilistically constraining uncertain physics/engineering model inputs to be consistent with observed experimental data. An initial probability distribution for these parameters is updated using the experimental information. Utilization of surrogate models and empirical adjustment for model form error in code calibration form the basis for the statistical methodology considered. The role of probabilistic code calibration in supporting code validation is discussed. Incorporation of model form uncertainty in rigorous uncertainty quantification (UQ) analyses is also addressed. Design criteria used within a batchmore » sequential design algorithm are introduced for efficiently achieving predictive maturity and improved code calibration. Predictive maturity refers to obtaining stable predictive inference with calibrated computer codes. These approaches allow for augmentation of initial experiment designs for collecting new physical data. A standard framework for data assimilation is presented and techniques for updating the posterior distribution of the state variables based on particle filtering and the ensemble Kalman filter are introduced.« less

The role of data fusion in predictive maintenance using digital twin

NASA Astrophysics Data System (ADS)

Liu, Zheng; Meyendorf, Norbert; Mrad, Nezih

2018-04-01

Modern aerospace industry is migrating from reactive to proactive and predictive maintenance to increase platform operational availability and efficiency, extend its useful life cycle and reduce its life cycle cost. Multiphysics modeling together with data-driven analytics generate a new paradigm called "Digital Twin." The digital twin is actually a living model of the physical asset or system, which continually adapts to operational changes based on the collected online data and information, and can forecast the future of the corresponding physical counterpart. This paper reviews the overall framework to develop a digital twin coupled with the industrial Internet of Things technology to advance aerospace platforms autonomy. Data fusion techniques particularly play a significant role in the digital twin framework. The flow of information from raw data to high-level decision making is propelled by sensor-to-sensor, sensor-to-model, and model-to-model fusion. This paper further discusses and identifies the role of data fusion in the digital twin framework for aircraft predictive maintenance.

Development of a Predictive Model for the Stabilizer Concentration Estimation in Microreservoir Transdermal Drug Delivery Systems Using Lipophilic Pressure-Sensitive Adhesives as Matrix/Carrier.

PubMed

Chenevas-Paule, Clémence; Wolff, Hans-Michael; Ashton, Mark; Schubert, Martin; Dodou, Kalliopi

2017-05-01

Microreservoir-type transdermal drug delivery systems (MTDDS) can prevent drug crystallization; however, no current predictive model considers the impact of drug load and hydration on their physical stability. We investigated MTDDS films containing polyvinylpyrrolidone (PVP) as polymeric drug stabilizer in lipophilic pressure-sensitive adhesive (silicone). Medicated and unmedicated silicone films with different molar N-vinylpyrrolidone:drug ratios were prepared and characterized by Fourier transform infrared spectroscopy, differential scanning calorimetry, scanning electron microscopy, microscopy, dynamic vapor sorption (DVS), and stability testing for 4 months at different storage conditions. Homogeneously distributed drug-PVP associates were observed when nonaqueous emulsions, containing drug-PVP (inner phase) and silicone adhesive (outer phase), were dried to films. DVS data were essential to predict physical stability at different humidities. A predictive thermodynamic model was developed based on drug-polymer hydrogen-bonding interactions, using the Hoffman equation, to estimate the drug-PVP ratio needed to obtain stable MTDDS and to evaluate the impact of humidity on their physical stability. This new approach considers the impact of polymorphism on drug solubility by using easily accessible experimental data (T m and DVS) and avoids uncertainties associated with the solubility parameter approach. In conclusion, a good fit of predicted and experimental data was observed. Copyright © 2017 American Pharmacists Association®. Published by Elsevier Inc. All rights reserved.

Comprehensive model for predicting elemental composition of coal pyrolysis products

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ricahrds, Andrew P.; Shutt, Tim; Fletcher, Thomas H.

Large-scale coal combustion simulations depend highly on the accuracy and utility of the physical submodels used to describe the various physical behaviors of the system. Coal combustion simulations depend on the particle physics to predict product compositions, temperatures, energy outputs, and other useful information. The focus of this paper is to improve the accuracy of devolatilization submodels, to be used in conjunction with other particle physics models. Many large simulations today rely on inaccurate assumptions about particle compositions, including that the volatiles that are released during pyrolysis are of the same elemental composition as the char particle. Another common assumptionmore » is that the char particle can be approximated by pure carbon. These assumptions will lead to inaccuracies in the overall simulation. There are many factors that influence pyrolysis product composition, including parent coal composition, pyrolysis conditions (including particle temperature history and heating rate), and others. All of these factors are incorporated into the correlations to predict the elemental composition of the major pyrolysis products, including coal tar, char, and light gases.« less

Protection motivation theory and physical activity in the general population: a systematic literature review.

PubMed

Bui, Linh; Mullan, Barbara; McCaffery, Kirsten

2013-01-01

An appropriate theoretical framework may be useful for guiding the development of physical activity interventions. This review investigates the effectiveness of the protection motivation theory (PMT), a model based on the cognitive mediation processes of behavioral change, in the prediction and promotion of physical activity participation. A literature search was conducted using the databases MEDLINE, PsycINFO, PubMed, and Web of Science, and a manual search was conducted on relevant reference lists. Studies were included if they tested or applied the PMT, measured physical activity, and sampled from healthy populations. A total of 20 studies were reviewed, grouped into four design categories: prediction, stage discrimination, experimental manipulation, and intervention. The results indicated that the PMT's coping appraisal construct of self-efficacy generally appears to be the most effective in predicting and promoting physical activity participation. In conclusion, the PMT shows some promise, however, there are still substantial gaps in the evidence.

Dissecting Magnetar Variability with Bayesian Hierarchical Models

NASA Astrophysics Data System (ADS)

Huppenkothen, Daniela; Brewer, Brendon J.; Hogg, David W.; Murray, Iain; Frean, Marcus; Elenbaas, Chris; Watts, Anna L.; Levin, Yuri; van der Horst, Alexander J.; Kouveliotou, Chryssa

2015-09-01

Neutron stars are a prime laboratory for testing physical processes under conditions of strong gravity, high density, and extreme magnetic fields. Among the zoo of neutron star phenomena, magnetars stand out for their bursting behavior, ranging from extremely bright, rare giant flares to numerous, less energetic recurrent bursts. The exact trigger and emission mechanisms for these bursts are not known; favored models involve either a crust fracture and subsequent energy release into the magnetosphere, or explosive reconnection of magnetic field lines. In the absence of a predictive model, understanding the physical processes responsible for magnetar burst variability is difficult. Here, we develop an empirical model that decomposes magnetar bursts into a superposition of small spike-like features with a simple functional form, where the number of model components is itself part of the inference problem. The cascades of spikes that we model might be formed by avalanches of reconnection, or crust rupture aftershocks. Using Markov Chain Monte Carlo sampling augmented with reversible jumps between models with different numbers of parameters, we characterize the posterior distributions of the model parameters and the number of components per burst. We relate these model parameters to physical quantities in the system, and show for the first time that the variability within a burst does not conform to predictions from ideas of self-organized criticality. We also examine how well the properties of the spikes fit the predictions of simplified cascade models for the different trigger mechanisms.

DISSECTING MAGNETAR VARIABILITY WITH BAYESIAN HIERARCHICAL MODELS

DOE Office of Scientific and Technical Information (OSTI.GOV)

Huppenkothen, Daniela; Elenbaas, Chris; Watts, Anna L.

Neutron stars are a prime laboratory for testing physical processes under conditions of strong gravity, high density, and extreme magnetic fields. Among the zoo of neutron star phenomena, magnetars stand out for their bursting behavior, ranging from extremely bright, rare giant flares to numerous, less energetic recurrent bursts. The exact trigger and emission mechanisms for these bursts are not known; favored models involve either a crust fracture and subsequent energy release into the magnetosphere, or explosive reconnection of magnetic field lines. In the absence of a predictive model, understanding the physical processes responsible for magnetar burst variability is difficult. Here,more » we develop an empirical model that decomposes magnetar bursts into a superposition of small spike-like features with a simple functional form, where the number of model components is itself part of the inference problem. The cascades of spikes that we model might be formed by avalanches of reconnection, or crust rupture aftershocks. Using Markov Chain Monte Carlo sampling augmented with reversible jumps between models with different numbers of parameters, we characterize the posterior distributions of the model parameters and the number of components per burst. We relate these model parameters to physical quantities in the system, and show for the first time that the variability within a burst does not conform to predictions from ideas of self-organized criticality. We also examine how well the properties of the spikes fit the predictions of simplified cascade models for the different trigger mechanisms.« less

WEPP Model applications for evaluations of best management practices

Treesearch

D. C. Flanagan; W. J. Elliott; J. R. Frankenberger; C. Huang

2010-01-01

The Water Erosion Prediction Project (WEPP) model is a process-based erosion prediction technology for application to small watersheds and hillslope profiles, under agricultural, forested, rangeland, and other land management conditions. Developed by the United States Department of Agriculture (USDA) over the past 25 years, WEPP simulates many of the physical processes...

The Magnetic Field along the Axis of a Short, Thick Solenoid

ERIC Educational Resources Information Center

Hart, Francis Xavier

2018-01-01

We commonly ask students to compare the results of their experimental measurements with the predictions of a simple physical model that is well understood. However, in practice, physicists must compare their experimental measurements with the predictions of several models, none of which may work well over the entire range of measurements. The…

Calculation of the Intensity of Physical Time Fluctuations Using the Standard Solar Model and its Comparison with the Results of Experimental Measurements

NASA Astrophysics Data System (ADS)

Morozov, A. N.

2017-11-01

The article reviews the possibility of describing physical time as a random Poisson process. An equation allowing the intensity of physical time fluctuations to be calculated depending on the entropy production density within irreversible natural processes has been proposed. Based on the standard solar model the work calculates the entropy production density inside the Sun and the dependence of the intensity of physical time fluctuations on the distance to the centre of the Sun. A free model parameter has been established, and the method of its evaluation has been suggested. The calculations of the entropy production density inside the Sun showed that it differs by 2-3 orders of magnitude in different parts of the Sun. The intensity of physical time fluctuations on the Earth's surface depending on the entropy production density during the sunlight-to-Earth's thermal radiation conversion has been theoretically predicted. A method of evaluation of the Kullback's measure of voltage fluctuations in small amounts of electrolyte has been proposed. Using a simple model of the Earth's surface heat transfer to the upper atmosphere, the effective Earth's thermal radiation temperature has been determined. A comparison between the theoretical values of the Kullback's measure derived from the fluctuating physical time model and the experimentally measured values of this measure for two independent electrolytic cells showed a good qualitative and quantitative concurrence of predictions of both theoretical model and experimental data.

Exploring Gender Differences in Predicting Physical Activity among Elementary Aged Children: An Application of the Integrated Behavioral Model

ERIC Educational Resources Information Center

Branscum, Paul; Bhochhibhoya, Amir

2016-01-01

Background: The integrated behavioral model (IBM) is a new and emerging theory in the field of health promotion and health education, and more applications are needed to test the usefulness of the model for research and practice. Purpose: The purpose of this study was to operationalize the IBM as it relates to physical activity (PA) among children…

Predictive Ability of Pender's Health Promotion Model for Physical Activity and Exercise in People with Spinal Cord Injuries: A Hierarchical Regression Analysis

ERIC Educational Resources Information Center

Keegan, John P.; Chan, Fong; Ditchman, Nicole; Chiu, Chung-Yi

2012-01-01

The main objective of this study was to validate Pender's Health Promotion Model (HPM) as a motivational model for exercise/physical activity self-management for people with spinal cord injuries (SCIs). Quantitative descriptive research design using hierarchical regression analysis (HRA) was used. A total of 126 individuals with SCI were recruited…

Variable Selection for Regression Models of Percentile Flows

NASA Astrophysics Data System (ADS)

Fouad, G.

2017-12-01

Percentile flows describe the flow magnitude equaled or exceeded for a given percent of time, and are widely used in water resource management. However, these statistics are normally unavailable since most basins are ungauged. Percentile flows of ungauged basins are often predicted using regression models based on readily observable basin characteristics, such as mean elevation. The number of these independent variables is too large to evaluate all possible models. A subset of models is typically evaluated using automatic procedures, like stepwise regression. This ignores a large variety of methods from the field of feature (variable) selection and physical understanding of percentile flows. A study of 918 basins in the United States was conducted to compare an automatic regression procedure to the following variable selection methods: (1) principal component analysis, (2) correlation analysis, (3) random forests, (4) genetic programming, (5) Bayesian networks, and (6) physical understanding. The automatic regression procedure only performed better than principal component analysis. Poor performance of the regression procedure was due to a commonly used filter for multicollinearity, which rejected the strongest models because they had cross-correlated independent variables. Multicollinearity did not decrease model performance in validation because of a representative set of calibration basins. Variable selection methods based strictly on predictive power (numbers 2-5 from above) performed similarly, likely indicating a limit to the predictive power of the variables. Similar performance was also reached using variables selected based on physical understanding, a finding that substantiates recent calls to emphasize physical understanding in modeling for predictions in ungauged basins. The strongest variables highlighted the importance of geology and land cover, whereas widely used topographic variables were the weakest predictors. Variables suffered from a high degree of multicollinearity, possibly illustrating the co-evolution of climatic and physiographic conditions. Given the ineffectiveness of many variables used here, future work should develop new variables that target specific processes associated with percentile flows.

Fit to predict? Eco-informatics for predicting the catchability of a pelagic fish in near real time.

PubMed

Scales, Kylie L; Hazen, Elliott L; Maxwell, Sara M; Dewar, Heidi; Kohin, Suzanne; Jacox, Michael G; Edwards, Christopher A; Briscoe, Dana K; Crowder, Larry B; Lewison, Rebecca L; Bograd, Steven J

2017-12-01

The ocean is a dynamic environment inhabited by a diverse array of highly migratory species, many of which are under direct exploitation in targeted fisheries. The timescales of variability in the marine realm coupled with the extreme mobility of ocean-wandering species such as tuna and billfish complicates fisheries management. Developing eco-informatics solutions that allow for near real-time prediction of the distributions of highly mobile marine species is an important step towards the maturation of dynamic ocean management and ecological forecasting. Using 25 yr (1990-2014) of NOAA fisheries' observer data from the California drift gillnet fishery, we model relative probability of occurrence (presence-absence) and catchability (total catch per gillnet set) of broadbill swordfish Xiphias gladius in the California Current System. Using freely available environmental data sets and open source software, we explore the physical drivers of regional swordfish distribution. Comparing models built upon remotely sensed data sets with those built upon a data-assimilative configuration of the Regional Ocean Modelling System (ROMS), we explore trade-offs in model construction, and address how physical data can affect predictive performance and operational capacity. Swordfish catchability was found to be highest in deeper waters (>1,500 m) with surface temperatures in the 14-20°C range, isothermal layer depth (ILD) of 20-40 m, positive sea surface height (SSH) anomalies, and during the new moon (<20% lunar illumination). We observed a greater influence of mesoscale variability (SSH, wind speed, isothermal layer depth, eddy kinetic energy) in driving swordfish catchability (total catch) than was evident in predicting the relative probability of presence (presence-absence), confirming the utility of generating spatiotemporally dynamic predictions. Data-assimilative ROMS circumvent the limitations of satellite remote sensing in providing physical data fields for species distribution models (e.g., cloud cover, variable resolution, subsurface data), and facilitate broad-scale prediction of dynamic species distributions in near real time. © 2017 by the Ecological Society of America.

Assessing participation in community-based physical activity programs in Brazil.

PubMed

Reis, Rodrigo S; Yan, Yan; Parra, Diana C; Brownson, Ross C

2014-01-01

This study aimed to develop and validate a risk prediction model to examine the characteristics that are associated with participation in community-based physical activity programs in Brazil. We used pooled data from three surveys conducted from 2007 to 2009 in state capitals of Brazil with 6166 adults. A risk prediction model was built considering program participation as an outcome. The predictive accuracy of the model was quantified through discrimination (C statistic) and calibration (Brier score) properties. Bootstrapping methods were used to validate the predictive accuracy of the final model. The final model showed sex (women: odds ratio [OR] = 3.18, 95% confidence interval [CI] = 2.14-4.71), having less than high school degree (OR = 1.71, 95% CI = 1.16-2.53), reporting a good health (OR = 1.58, 95% CI = 1.02-2.24) or very good/excellent health (OR = 1.62, 95% CI = 1.05-2.51), having any comorbidity (OR = 1.74, 95% CI = 1.26-2.39), and perceiving the environment as safe to walk at night (OR = 1.59, 95% CI = 1.18-2.15) as predictors of participation in physical activity programs. Accuracy indices were adequate (C index = 0.778, Brier score = 0.031) and similar to those obtained from bootstrapping (C index = 0.792, Brier score = 0.030). Sociodemographic and health characteristics as well as perceptions of the environment are strong predictors of participation in community-based programs in selected cities of Brazil.

The role of personality, disability and physical activity in the development of medication-overuse headache: a prospective observational study.

PubMed

Mose, Louise S; Pedersen, Susanne S; Debrabant, Birgit; Jensen, Rigmor H; Gram, Bibi

2018-05-25

Factors associated with development of medication-overuse headache (MOH) in migraine patients are not fully understood, but with respect to prevention, the ability to predict the onset of MOH is clinically important. The aims were to examine if personality characteristics, disability and physical activity level are associated with the onset of MOH in a group of migraine patients and explore to which extend these factors combined can predict the onset of MOH. The study was a single-center prospective observational study of migraine patients. At inclusion, all patients completed questionnaires evaluating 1) personality (NEO Five-Factor Inventory), 2) disability (Migraine Disability Assessment), and 3) physical activity level (Physical Activity Scale 2.1). Diagnostic codes from patients' electronic health records confirmed if they had developed MOH during the study period of 20 months. Analyses of associations were performed and to identify which of the variables predict onset MOH, a multivariable least absolute shrinkage and selection operator (LASSO) logistic regression model was fitted to predict presence or absence of MOH. Out of 131 participants, 12 % (n=16) developed MOH. Migraine disability score (OR=1.02, 95 % CI: 1.00 to 1.04), intensity of headache (OR=1.49, 95 % CI: 1.03 to 2.15) and headache frequency (OR=1.02, 95 % CI: 1.00 to 1.04) were associated with the onset of MOH adjusting for age and gender. To identify which of the variables predict onset MOH, we used a LASSO regression model, and evaluating the predictive performance of the LASSO-mode (containing the predictors MIDAS score, MIDAS-intensity and -frequency, neuroticism score, time with moderate physical activity, educational level, hours of sleep daily and number of contacts to the headache clinic) in terms of area under the curve (AUC) was weak (apparent AUC=0.62, 95% CI: 0.41-0.82). Disability, headache intensity and frequency were associated with the onset of MOH whereas personality and the level of physical activity were not. The multivariable LASSO model based on personality, disability and physical activity is applicable despite moderate study size, however it can be considered as a weak classifier for discriminating between absence and presence of MOH.

Social influences on physical activity in Anglo- and Vietnamese-Australian adolescent males in a single sex school.

PubMed

Wilson, Andrew N; Dollman, James

2007-06-01

Understanding factors that influence physical activity levels of adolescents can assist the design of more effective interventions. Social support is a consistent correlate of youth physical activity but few studies have examined this in different cultural settings. Male adolescents (n=180, age=13.58+/-0.97 years) from a metropolitan single sex private school participated in this study. Habitual physical activity was estimated using the 3-day physical activity recall (3dPAR), and aspects of social support to be physically active using a specifically designed questionnaire. Comparisons were made between Anglo-Australians (n=118), whose parents were both born in Australia, and Vietnamese-Australians (n=62), whose parents were both born in Vietnam. There was a trend towards higher physical activity among Anglo-Australians, particularly on weekends. Anglo-Australians reported significantly more parental and peer support across most items pertaining to these constructs. Among the whole sample, social support variables explained 5-12% of the total explained variance in physical activity, with items pertaining to father and best friend support emerging as the strongest and most consistent predictors in multiple regression models. Among Anglo-Australians, the prediction models were relatively weak, explaining 0-9% of the total explained variance in physical activity. Prediction models for physical activity among Vietnamese-Australians were much stronger, explaining 11-32% of the total explained variance, with father's support variables contributing consistently to these models. The strong paternal influence on physical activity among Vietnamese-Australians needs to be confirmed in more diverse population groups, but results from this study suggest that interventions promoting physical activity among adolescent boys need to take into account cultural background as a moderator of widely reported social influences.

Channelling information flows from observation to decision; or how to increase certainty

NASA Astrophysics Data System (ADS)

Weijs, S. V.

2015-12-01

To make adequate decisions in an uncertain world, information needs to reach the decision problem, to enable overseeing the full consequences of each possible decision.On its way from the physical world to a decision problem, information is transferred through the physical processes that influence the sensor, then through processes that happen in the sensor, through wires or electromagnetic waves. For the last decade, most information becomes digitized at some point. From moment of digitization, information can in principle be transferred losslessly. Information about the physical world is often also stored, sometimes in compressed form, such as physical laws, concepts, or models of specific hydrological systems. It is important to note, however, that all information about a physical system eventually has to originate from observation (although inevitably coloured by some prior assumptions). This colouring makes the compression lossy, but is effectively the only way to make use of similarities in time and space that enable predictions while measuring only a a few macro-states of a complex hydrological system.Adding physical process knowledge to a hydrological model can thus be seen as a convenient way to transfer information from observations from a different time or place, to make predictions about another situation, assuming the same dynamics are at work.The key challenge to achieve more certainty in hydrological prediction can therefore be formulated as a challenge to tap and channel information flows from the environment. For tapping more information flows, new measurement techniques, large scale campaigns, historical data sets, and large sample hydrology and regionalization efforts can bring progress. For channelling the information flows with minimum loss, model calibration, and model formulation techniques should be critically investigated. Some experience from research in a Swiss high alpine catchment are used as an illustration.

a Study of Ultrasonic Wave Propagation Through Parallel Arrays of Immersed Tubes

NASA Astrophysics Data System (ADS)

Cocker, R. P.; Challis, R. E.

1996-06-01

Tubular array structures are a very common component in industrial heat exchanging plant and the non-destructive testing of these arrays is essential. Acoustic methods using microphones or ultrasound are attractive but require a thorough understanding of the acoustic properties of tube arrays. This paper details the development and testing of a small-scale physical model of a tube array to verify the predictions of a theoretical model for acoustic propagation through tube arrays developed by Heckl, Mulholland, and Huang [1-5] as a basis for the consideration of small-scale physical models in the development of non-destructive testing procedures for tube arrays. Their model predicts transmission spectra for plane waves incident on an array of tubes arranged in straight rows. Relative transmission is frequency dependent with bands of high and low attenuation caused by resonances within individual tubes and between tubes in the array. As the number of rows in the array increases the relative transmission spectrum becomes more complex, with increasingly well-defined bands of high and low attenuation. Diffraction of acoustic waves with wavelengths less than the tube spacing is predicted and appears as step reductions in the transmission spectrum at frequencies corresponding to integer multiples of the tube spacing. Experiments with the physical model confirm the principle features of the theoretical treatment.

Predictive Factors of Regular Physical Activity among Middle-Aged Women in the West of Iran, Hamadan: Application of PRECEDE Model.

PubMed

Emdadi, Shohreh; Hazavehie, Seyed Mohammad Mehdi; Soltanian, Alireza; Bashirian, Saeed; Heidari Moghadam, Rashid

2015-01-01

Regular physical activity is important for midlife women. Models and theories help better understanding this behavior among middle-aged women and better planning for change behavior in target group. This study aimed to investigate predictive factors of regular physical activity among middle-aged women based on PRECEDE model as a theoretical framework. This descriptive-analytical study was performed on 866 middle-aged women of Hamadan City western Iran, recruited with a proportional stratified sampling method in 2015. The participants completed a self-administered questionnaire including questions on demographic characteristics and PRECEDE model constructs and IPAQ questionnaire. Data were then analyzed by SPSS-16 and AMOS-16 using the Pearson correlation test and the pathway analysis method. Overall, 57% of middle-aged women were inactive (light level) or not sufficiently active. With SEM (Structural Equation Modeling) analysis, knowledge b=0.84, P<0.001, attitude b=0.799, P<0.001, self-efficacy b=0.633, P<0.001 as predisposing factor and social support as reinforcing factor b=0.2, P<0.001 were the most important predictors for physical activity among middle-aged women in Hamadan. The framework of the PRECEDE model is useful in understanding regular physical activity among middle-aged women. Furthermore, results showed the importance of predisposing and reinforcing factors when planning educational interventions.

A Goddard Multi-Scale Modeling System with Unified Physics

NASA Technical Reports Server (NTRS)

Tao, W.K.; Anderson, D.; Atlas, R.; Chern, J.; Houser, P.; Hou, A.; Lang, S.; Lau, W.; Peters-Lidard, C.; Kakar, R.;

Motor Skill Competence and Perceived Motor Competence: Which Best Predicts Physical Activity among Girls?

PubMed Central

Khodaverdi, Zeinab; Bahram, Abbas; Khalaji, Hassan; Kazemnejad, Anoshirvan

2013-01-01

Abstract Background The main purpose of this study was to determine which correlate, perceived motor competence or motor skill competence, best predicts girls’ physical activity behavior. Methods A sample of 352 girls (mean age=8.7, SD=0.3 yr) participated in this study. To assess motor skill competence and perceived motor competence, each child completed the Test of Gross Motor Development-2 and Physical Ability sub-scale of Marsh’s Self-Description Questionnaire. Children’s physical activity was assessed by the Physical Activity Questionnaire for Older Children. Multiple linear regression model was used to determine whether perceived motor competence or motor skill competence best predicts moderate-to-vigorous self-report physical activity. Results Multiple regression analysis indicated that motor skill competence and perceived motor competence predicted 21% variance in physical activity (R2=0.21, F=48.9, P=0.001), and motor skill competence (R2=0.15, ᵝ=0.33, P= 0.001) resulted in more variance than perceived motor competence (R2=0.06, ᵝ=0.25, P=0.001) in physical activity. Conclusion Results revealed motor skill competence had more influence in comparison with perceived motor competence on physical activity level. We suggest interventional programs based on motor skill competence and perceived motor competence should be administered or implemented to promote physical activity in young girls. PMID:26060623

Finite Element Modeling of the NASA Langley Aluminum Testbed Cylinder

NASA Technical Reports Server (NTRS)

Grosveld, Ferdinand W.; Pritchard, Joselyn I.; Buehrle, Ralph D.; Pappa, Richard S.

2002-01-01

The NASA Langley Aluminum Testbed Cylinder (ATC) was designed to serve as a universal structure for evaluating structural acoustic codes, modeling techniques and optimization methods used in the prediction of aircraft interior noise. Finite element models were developed for the components of the ATC based on the geometric, structural and material properties of the physical test structure. Numerically predicted modal frequencies for the longitudinal stringer, ring frame and dome component models, and six assembled ATC configurations were compared with experimental modal survey data. The finite element models were updated and refined, using physical parameters, to increase correlation with the measured modal data. Excellent agreement, within an average 1.5% to 2.9%, was obtained between the predicted and measured modal frequencies of the stringer, frame and dome components. The predictions for the modal frequencies of the assembled component Configurations I through V were within an average 2.9% and 9.1%. Finite element modal analyses were performed for comparison with 3 psi and 6 psi internal pressurization conditions in Configuration VI. The modal frequencies were predicted by applying differential stiffness to the elements with pressure loading and creating reduced matrices for beam elements with offsets inside external superelements. The average disagreement between the measured and predicted differences for the 0 psi and 6 psi internal pressure conditions was less than 0.5%. Comparably good agreement was obtained for the differences between the 0 psi and 3 psi measured and predicted internal pressure conditions.

Temporal Relationship Between Insulin Sensitivity and the Pubertal Decline in Physical Activity in Peripubertal Hispanic and African American Females

PubMed Central

Spruijt-Metz, Donna; Belcher, Britni R.; Hsu, Ya-Wen; McClain, Arianna D.; Chou, Chih-Ping; Nguyen-Rodriguez, Selena; Weigensberg, Marc J.; Goran, Michael I.

2013-01-01

OBJECTIVE Little attention has been paid to possible intrinsic biological mechanisms for the decline in physical activity that occurs during puberty. This longitudinal observational study examined the association between baseline insulin sensitivity (SI) and declines in physical activity and increases in sedentary behavior in peripubertal minority females over a year. RESEARCH DESIGN AND METHODS Participants were Hispanic and African American girls (n = 55; 76% Hispanic; mean age 9.4 years; 36% obese). SI and other insulin indices were measured at baseline using the frequently sampled intravenous glucose tolerance test. Physical activity was measured on a quarterly basis by accelerometry and self-report. RESULTS Physical activity declined by 25% and time spent in sedentary behaviors increased by ∼13% over 1 year. Lower baseline SI predicted the decline in physical activity measured by accelerometry, whereas higher baseline acute insulin response to glucose predicted the decline in physical activity measured by self-report. Time spent in sedentary behavior increased by ~13% over 1 year, and this was predicted by lower baseline SI. All models controlled for adiposity, age, pubertal stage, and ethnicity. CONCLUSIONS When evaluated using a longitudinal design with strong outcome measures, this study suggests that lower baseline SI predicts a greater decline in physical activity in peripubertal minority females. PMID:23846812

One-Dimensional Modelling of Internal Ballistics

NASA Astrophysics Data System (ADS)

Monreal-González, G.; Otón-Martínez, R. A.; Velasco, F. J. S.; García-Cascáles, J. R.; Ramírez-Fernández, F. J.

2017-10-01

A one-dimensional model is introduced in this paper for problems of internal ballistics involving solid propellant combustion. First, the work presents the physical approach and equations adopted. Closure relationships accounting for the physical phenomena taking place during combustion (interfacial friction, interfacial heat transfer, combustion) are deeply discussed. Secondly, the numerical method proposed is presented. Finally, numerical results provided by this code (UXGun) are compared with results of experimental tests and with the outcome from a well-known zero-dimensional code. The model provides successful results in firing tests of artillery guns, predicting with good accuracy the maximum pressure in the chamber and muzzle velocity what highlights its capabilities as prediction/design tool for internal ballistics.

A Simulation Model for Studying Effects of Pollution and Freshwater Inflow on Secondary Productivity in an Ecosystem. Ph.D. Thesis - North Carolina State Univ.

NASA Technical Reports Server (NTRS)

Johnson, R. W.

1974-01-01

A mathematical model of an ecosystem is developed. Secondary productivity is evaluated in terms of man related and controllable factors. Information from an existing physical parameters model is used as well as pertinent biological measurements. Predictive information of value to estuarine management is presented. Biological, chemical, and physical parameters measured in order to develop models of ecosystems are identified.

Integrating machine learning to achieve an automatic parameter prediction for practical continuous-variable quantum key distribution

NASA Astrophysics Data System (ADS)

Liu, Weiqi; Huang, Peng; Peng, Jinye; Fan, Jianping; Zeng, Guihua

2018-02-01

For supporting practical quantum key distribution (QKD), it is critical to stabilize the physical parameters of signals, e.g., the intensity, phase, and polarization of the laser signals, so that such QKD systems can achieve better performance and practical security. In this paper, an approach is developed by integrating a support vector regression (SVR) model to optimize the performance and practical security of the QKD system. First, a SVR model is learned to precisely predict the time-along evolutions of the physical parameters of signals. Second, such predicted time-along evolutions are employed as feedback to control the QKD system for achieving the optimal performance and practical security. Finally, our proposed approach is exemplified by using the intensity evolution of laser light and a local oscillator pulse in the Gaussian modulated coherent state QKD system. Our experimental results have demonstrated three significant benefits of our SVR-based approach: (1) it can allow the QKD system to achieve optimal performance and practical security, (2) it does not require any additional resources and any real-time monitoring module to support automatic prediction of the time-along evolutions of the physical parameters of signals, and (3) it is applicable to any measurable physical parameter of signals in the practical QKD system.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Donner, Leo J.; O'Brien, Travis A.; Rieger, Daniel

Both climate forcing and climate sensitivity persist as stubborn uncertainties limiting the extent to which climate models can provide actionable scientific scenarios for climate change. A key, explicit control on cloud-aerosol interactions, the largest uncertainty in climate forcing, is the vertical velocity of cloud-scale updrafts. Model-based studies of climate sensitivity indicate that convective entrainment, which is closely related to updraft speeds, is an important control on climate sensitivity. Updraft vertical velocities also drive many physical processes essential to numerical weather prediction. Vertical velocities and their role in atmospheric physical processes have been given very limited attention in models for climatemore » and numerical weather prediction. The relevant physical scales range down to tens of meters and are thus frequently sub-grid and require parameterization. Many state-of-science convection parameterizations provide mass fluxes without specifying vertical velocities, and parameterizations which do provide vertical velocities have been subject to limited evaluation against what have until recently been scant observations. Atmospheric observations imply that the distribution of vertical velocities depends on the areas over which the vertical velocities are averaged. Distributions of vertical velocities in climate models may capture this behavior, but it has not been accounted for when parameterizing cloud and precipitation processes in current models. New observations of convective vertical velocities offer a potentially promising path toward developing process-level cloud models and parameterizations for climate and numerical weather prediction. Taking account of scale-dependence of resolved vertical velocities offers a path to matching cloud-scale physical processes and their driving dynamics more realistically, with a prospect of reduced uncertainty in both climate forcing and sensitivity.« less

A laboratory-scale comparison of rate of spread model predictions using chaparral fuel beds – preliminary results

Treesearch

D.R. Weise; E. Koo; X. Zhou; S. Mahalingam

2011-01-01

Observed fire spread rates from 240 laboratory fires in horizontally-oriented single-species live fuel beds were compared to predictions from various implementations and modifications of the Rothermel rate of spread model and a physical fire spread model developed by Pagni and Koo. Packing ratio of the laboratory fuel beds was generally greater than that observed in...

Predictable patterns of the May-June rainfall anomaly over East Asia

NASA Astrophysics Data System (ADS)

Xing, Wen; Wang, Bin; Yim, So-Young; Ha, Kyung-Ja

2017-02-01

During early summer (May-June, MJ), East Asia (EA) subtropical front is a defining feature of Asian monsoon, which produces the most prominent precipitation band in the global subtropics. Here we show that dynamical prediction of early summer EA (20°N-45°N, 100°E-130°E) rainfall made by four coupled climate models' ensemble hindcast (1979-2010) yields only a moderate skill and cannot be used to estimate predictability. The present study uses an alternative, empirical orthogonal function (EOF)-based physical-empirical (P-E) model approach to predict rainfall anomaly pattern and estimate its potential predictability. The first three leading modes are physically meaningful and can be, respectively, attributed to (a) the interaction between the anomalous western North Pacific subtropical high and underlying Indo-Pacific warm ocean, (b) the forcing associated with North Pacific sea surface temperature (SST) anomaly, and (c) the development of equatorial central Pacific SST anomalies. A suite of P-E models is established to forecast the first three leading principal components. All predictors are 0 month ahead of May, so the prediction here is named as a 0 month lead prediction. The cross-validated hindcast results demonstrate that these modes may be predicted with significant temporal correlation skills (0.48-0.72). Using the predicted principal components and the corresponding EOF patterns, the total MJ rainfall anomaly was hindcasted for the period of 1979-2015. The time-mean pattern correlation coefficient (PCC) score reaches 0.38, which is significantly higher than dynamical models' multimodel ensemble skill (0.21). The estimated potential maximum attainable PCC is around 0.65, suggesting that the dynamical prediction models may have large rooms to improve. Limitations and future work are discussed.

Ecological Forecasting in the Applied Sciences Program and Input to the Decadal Survey

NASA Technical Reports Server (NTRS)

Skiles, Joseph

2015-01-01

Ecological forecasting uses knowledge of physics, ecology and physiology to predict how ecosystems will change in the future in response to environmental factors. Further, Ecological Forecasting employs observations and models to predict the effects of environmental change on ecosystems. In doing so, it applies information from the physical, biological, and social sciences and promotes a scientific synthesis across the domains of physics, geology, chemistry, biology, and psychology. The goal is reliable forecasts that allow decision makers access to science-based tools in order to project changes in living systems. The next decadal survey will direct the development Earth Observation sensors and satellites for the next ten years. It is important that these new sensors and satellites address the requirements for ecosystem models, imagery, and other data for resource management. This presentation will give examples of these model inputs and some resources needed for NASA to continue effective Ecological Forecasting.

The motivating role of positive feedback in sport and physical education: evidence for a motivational model.

PubMed

Mouratidis, Athanasios; Vansteenkiste, Maarten; Lens, Willy; Sideridis, Georgios

2008-04-01

Based on self-determination theory (Deci & Ryan, 2000), an experimental study with middle school students participating in a physical education task and a correlational study with highly talented sport students investigated the motivating role of positive competence feedback on participants' well-being, performance, and intention to participate. In Study 1, structural equation modeling favored the hypothesized motivational model, in which, after controlling for pretask perceived competence and competence valuation, feedback positively predicted competence satisfaction, which in turn predicted higher levels of vitality and greater intentions to participate, through the mediation of autonomous motivation. No effects on performance were found. Study 2 further showed that autonomous motivation mediated the relation between competence satisfaction and well-being, whereas a motivation mediated the negative relation between competence satisfaction and ill-being and rated performance. The discussion focuses on the motivational role of competence feedback in sports and physical education settings.

Causal modeling of secondary science students' intentions to enroll in physics

NASA Astrophysics Data System (ADS)

Crawley, Frank E.; Black, Carolyn B.

The purpose of this study was to explore the utility of the theory of planned behavior model developed by social psychologists for understanding and predicting the behavioral intentions of secondary science students regarding enrolling in physics. In particular, the study used a three-stage causal model to investigate the links from external variables to behavioral, normative, and control beliefs; from beliefs to attitudes, subjective norm, and perceived behavioral control; and from attitudes, subjective norm, and perceived behavioral control to behavioral intentions. The causal modeling method was employed to verify the underlying causes of secondary science students' interest in enrolling physics as predicted in the theory of planned behavior. Data were collected from secondary science students (N = 264) residing in a central Texas city who were enrolled in earth science (8th grade), biology (9th grade), physical science (10th grade), or chemistry (11th grade) courses. Cause-and-effect relationships were analyzed using path analysis to test the direct effects of model variables specified in the theory of planned behavior. Results of this study indicated that students' intention to enroll in a high school physics course was determined by their attitude toward enrollment and their degree of perceived behavioral control. Attitude, subjective norm, and perceived behavioral control were, in turn, formed as a result of specific beliefs that students held about enrolling in physics. Grade level and career goals were found to be instrumental in shaping students' attitude. Immediate family members were identified as major referents in the social support system for enrolling in physics. Course and extracurricular conflicts and the fear of failure were shown to be the primary beliefs obstructing students' perception of control over physics enrollment. Specific recommendations are offered to researchers and practitioners for strengthening secondary school students' intentions to study physics.

A Novel Respiratory Motion Perturbation Model Adaptable to Patient Breathing Irregularities

PubMed Central

Yuan, Amy; Wei, Jie; Gaebler, Carl P.; Huang, Hailiang; Olek, Devin; Li, Guang

2016-01-01

Purpose To develop a physical, adaptive motion perturbation model to predict tumor motion using feedback from dynamic measurement of breathing conditions to compensate for breathing irregularities. Methods and Materials A novel respiratory motion perturbation (RMP) model was developed to predict tumor motion variations caused by breathing irregularities. This model contained 2 terms: the initial tumor motion trajectory, measured from 4-dimensional computed tomography (4DCT) images, and motion perturbation, calculated from breathing variations in tidal volume (TV) and breathing pattern (BP). The motion perturbation was derived from the patient-specific anatomy, tumor-specific location, and time-dependent breathing variations. Ten patients were studied, and 2 amplitude-binned 4DCT images for each patient were acquired within 2 weeks. The motion trajectories of 40 corresponding bifurcation points in both 4DCT images of each patient were obtained using deformable image registration. An in-house 4D data processing toolbox was developed to calculate the TV and BP as functions of the breathing phase. The motion was predicted from the simulation 4DCT scan to the treatment 4DCT scan, and vice versa, resulting in 800 predictions. For comparison, noncorrected motion differences and the predictions from a published 5-dimensional model were used. Results The average motion range in the superoinferior direction was 9.4 ± 4.4 mm, the average ΔTV ranged from 10 to 248 mm3 (−26% to 61%), and the ΔBP ranged from 0 to 0.2 (−71% to 333%) between the 2 4DCT scans. The mean noncorrected motion difference was 2.0 ± 2.8 mm between 2 4DCT motion trajectories. After applying the RMP model, the mean motion difference was reduced significantly to 1.2 ± 1.8 mm (P = .0018), a 40% improvement, similar to the 1.2 ± 1.8 mm (P = .72) predicted with the 5-dimensional model. Conclusions A novel physical RMP model was developed with an average accuracy of 1.2 ± 1.8 mm for interfraction motion prediction, similar to that of a published lung motion model. This physical RMP was analytically derived and is able to adapt to breathing irregularities. Further improvement of this RMP model is under investigation. PMID:27745981

A Novel Respiratory Motion Perturbation Model Adaptable to Patient Breathing Irregularities

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yuan, Amy; Wei, Jie; Gaebler, Carl P.

Purpose: To develop a physical, adaptive motion perturbation model to predict tumor motion using feedback from dynamic measurement of breathing conditions to compensate for breathing irregularities. Methods and Materials: A novel respiratory motion perturbation (RMP) model was developed to predict tumor motion variations caused by breathing irregularities. This model contained 2 terms: the initial tumor motion trajectory, measured from 4-dimensional computed tomography (4DCT) images, and motion perturbation, calculated from breathing variations in tidal volume (TV) and breathing pattern (BP). The motion perturbation was derived from the patient-specific anatomy, tumor-specific location, and time-dependent breathing variations. Ten patients were studied, and 2more » amplitude-binned 4DCT images for each patient were acquired within 2 weeks. The motion trajectories of 40 corresponding bifurcation points in both 4DCT images of each patient were obtained using deformable image registration. An in-house 4D data processing toolbox was developed to calculate the TV and BP as functions of the breathing phase. The motion was predicted from the simulation 4DCT scan to the treatment 4DCT scan, and vice versa, resulting in 800 predictions. For comparison, noncorrected motion differences and the predictions from a published 5-dimensional model were used. Results: The average motion range in the superoinferior direction was 9.4 ± 4.4 mm, the average ΔTV ranged from 10 to 248 mm{sup 3} (−26% to 61%), and the ΔBP ranged from 0 to 0.2 (−71% to 333%) between the 2 4DCT scans. The mean noncorrected motion difference was 2.0 ± 2.8 mm between 2 4DCT motion trajectories. After applying the RMP model, the mean motion difference was reduced significantly to 1.2 ± 1.8 mm (P=.0018), a 40% improvement, similar to the 1.2 ± 1.8 mm (P=.72) predicted with the 5-dimensional model. Conclusions: A novel physical RMP model was developed with an average accuracy of 1.2 ± 1.8 mm for interfraction motion prediction, similar to that of a published lung motion model. This physical RMP was analytically derived and is able to adapt to breathing irregularities. Further improvement of this RMP model is under investigation.« less

Elastic velocity models for gas-hydrate-bearing sediments-a comparison

NASA Astrophysics Data System (ADS)

Chand, Shyam; Minshull, Tim A.; Gei, Davide; Carcione, José M.

2004-11-01

The presence of gas hydrate in oceanic sediments is mostly identified by bottom-simulating reflectors (BSRs), reflection events with reversed polarity following the trend of the seafloor. Attempts to quantify the amount of gas hydrate present in oceanic sediments have been based mainly on the presence or absence of a BSR and its relative amplitude. Recent studies have shown that a BSR is not a necessary criterion for the presence of gas hydrates, but rather its presence depends on the type of sediments and the in situ conditions. The influence of hydrate on the physical properties of sediments overlying the BSR is determined by the elastic properties of their constituents and on sediment microstructure. In this context several approaches have been developed to predict the physical properties of sediments, and thereby quantify the amount of gas/gas hydrate present from observed deviations of these properties from those predicted for sediments without gas hydrate. We tested four models: the empirical weighted equation (WE); the three-phase effective-medium theory (TPEM); the three-phase Biot theory (TPB) and the differential effective-medium theory (DEM). We compared these models for a range of variables (porosity and clay content) using standard values for physical parameters. The comparison shows that all the models predict sediment properties comparable to field values except for the WE model at lower porosities and the TPB model at higher porosities. The models differ in the variation of velocity with porosity and clay content. The variation of velocity with hydrate saturation is also different, although the range is similar. We have used these models to predict velocities for field data sets from sediment sections with and without gas hydrates. The first is from the Mallik 2L-38 well, Mackenzie Delta, Canada, and the second is from Ocean Drilling Program (ODP) Leg 164 on Blake Ridge. Both data sets have Vp and Vs information along with the composition and porosity of the matrix. Models are considered successful if predictions from both Vp and Vs match hydrate saturations inferred from other data. Three of the models predict consistent hydrate saturations of 60-80 per cent from both Vp and Vs from log and vertical seismic profiling data for the Mallik 2L-38 well data set, but the TPEM model predicts 20 per cent higher saturations, as does the DEM model with a clay-water starting medium. For the clay-rich sediments of Blake Ridge, the DEM, TPEM and WE models predict 10-20 per cent hydrate saturation from Vp data, comparable to that inferred from resistivity data. The hydrate saturation predicted by the TPB model from Vp is higher. Using Vs data, the DEM and TPEM models predict very low or zero hydrate saturation while the TPB and WE models predict hydrate saturation very much higher than those predicted from Vp data. Low hydrate saturations are observed to have little effect on Vs. The hydrate phase appears to be connected within the sediment microstructure even at low saturations.

Modeling of metal thin film growth: Linking angstrom-scale molecular dynamics results to micron-scale film topographies

NASA Astrophysics Data System (ADS)

Hansen, U.; Rodgers, S.; Jensen, K. F.

2000-07-01

A general method for modeling ionized physical vapor deposition is presented. As an example, the method is applied to growth of an aluminum film in the presence of an ionized argon flux. Molecular dynamics techniques are used to examine the surface adsorption, reflection, and sputter reactions taking place during ionized physical vapor deposition. We predict their relative probabilities and discuss their dependence on energy and incident angle. Subsequently, we combine the information obtained from molecular dynamics with a line of sight transport model in a two-dimensional feature, incorporating all effects of reemission and resputtering. This provides a complete growth rate model that allows inclusion of energy- and angular-dependent reaction rates. Finally, a level-set approach is used to describe the morphology of the growing film. We thus arrive at a computationally highly efficient and accurate scheme to model the growth of thin films. We demonstrate the capabilities of the model predicting the major differences on Al film topographies between conventional and ionized sputter deposition techniques studying thin film growth under ionized physical vapor deposition conditions with different Ar fluxes.

Fundamental Studies of Strength Physics--Methodology of Longevity Prediction of Materials under Arbitrary Thermally and Forced Effects

ERIC Educational Resources Information Center

Petrov, Mark G.

2016-01-01

Thermally activated analysis of experimental data allows considering about the structure features of each material. By modelling the structural heterogeneity of materials by means of rheological models, general and local plastic flows in metals and alloys can be described over. Based on physical fundamentals of failure and deformation of materials…

The influence of API concentration on the roller compaction process: modeling and prediction of the post compacted ribbon, granule and tablet properties using multivariate data analysis.

PubMed

Boersen, Nathan; Carvajal, M Teresa; Morris, Kenneth R; Peck, Garnet E; Pinal, Rodolfo

2015-01-01

While previous research has demonstrated roller compaction operating parameters strongly influence the properties of the final product, a greater emphasis might be placed on the raw material attributes of the formulation. There were two main objectives to this study. First, to assess the effects of different process variables on the properties of the obtained ribbons and downstream granules produced from the rolled compacted ribbons. Second, was to establish if models obtained with formulations of one active pharmaceutical ingredient (API) could predict the properties of similar formulations in terms of the excipients used, but with a different API. Tolmetin and acetaminophen, chosen for their different compaction properties, were roller compacted on Fitzpatrick roller compactor using the same formulation. Models created using tolmetin and tested using acetaminophen. The physical properties of the blends, ribbon, granule and tablet were characterized. Multivariate analysis using partial least squares was used to analyze all data. Multivariate models showed that the operating parameters and raw material attributes were essential in the prediction of ribbon porosity and post-milled particle size. The post compacted ribbon and granule attributes also significantly contributed to the prediction of the tablet tensile strength. Models derived using tolmetin could reasonably predict the ribbon porosity of a second API. After further processing, the post-milled ribbon and granules properties, rather than the physical attributes of the formulation were needed to predict downstream tablet properties. An understanding of the percolation threshold of the formulation significantly improved the predictive ability of the models.

Toward Supersonic Retropropulsion CFD Validation

NASA Technical Reports Server (NTRS)

Kleb, Bil; Schauerhamer, D. Guy; Trumble, Kerry; Sozer, Emre; Barnhardt, Michael; Carlson, Jan-Renee; Edquist, Karl

2011-01-01

This paper begins the process of verifying and validating computational fluid dynamics (CFD) codes for supersonic retropropulsive flows. Four CFD codes (DPLR, FUN3D, OVERFLOW, and US3D) are used to perform various numerical and physical modeling studies toward the goal of comparing predictions with a wind tunnel experiment specifically designed to support CFD validation. Numerical studies run the gamut in rigor from code-to-code comparisons to observed order-of-accuracy tests. Results indicate that this complex flowfield, involving time-dependent shocks and vortex shedding, design order of accuracy is not clearly evident. Also explored is the extent of physical modeling necessary to predict the salient flowfield features found in high-speed Schlieren images and surface pressure measurements taken during the validation experiment. Physical modeling studies include geometric items such as wind tunnel wall and sting mount interference, as well as turbulence modeling that ranges from a RANS (Reynolds-Averaged Navier-Stokes) 2-equation model to DES (Detached Eddy Simulation) models. These studies indicate that tunnel wall interference is minimal for the cases investigated; model mounting hardware effects are confined to the aft end of the model; and sparse grid resolution and turbulence modeling can damp or entirely dissipate the unsteadiness of this self-excited flow.

Emergent Constraints for Cloud Feedbacks and Climate Sensitivity

DOE PAGES

Klein, Stephen A.; Hall, Alex

2015-10-26

Emergent constraints are physically explainable empirical relationships between characteristics of the current climate and long-term climate prediction that emerge in collections of climate model simulations. With the prospect of constraining long-term climate prediction, scientists have recently uncovered several emergent constraints related to long-term cloud feedbacks. We review these proposed emergent constraints, many of which involve the behavior of low-level clouds, and discuss criteria to assess their credibility. With further research, some of the cases we review may eventually become confirmed emergent constraints, provided they are accompanied by credible physical explanations. Because confirmed emergent constraints identify a source of model errormore » that projects onto climate predictions, they deserve extra attention from those developing climate models and climate observations. While a systematic bias cannot be ruled out, it is noteworthy that the promising emergent constraints suggest larger cloud feedback and hence climate sensitivity.« less

On the predictive information criteria for model determination in seismic hazard analysis

NASA Astrophysics Data System (ADS)

Varini, Elisa; Rotondi, Renata

2016-04-01

Many statistical tools have been developed for evaluating, understanding, and comparing models, from both frequentist and Bayesian perspectives. In particular, the problem of model selection can be addressed according to whether the primary goal is explanation or, alternatively, prediction. In the former case, the criteria for model selection are defined over the parameter space whose physical interpretation can be difficult; in the latter case, they are defined over the space of the observations, which has a more direct physical meaning. In the frequentist approaches, model selection is generally based on an asymptotic approximation which may be poor for small data sets (e.g. the F-test, the Kolmogorov-Smirnov test, etc.); moreover, these methods often apply under specific assumptions on models (e.g. models have to be nested in the likelihood ratio test). In the Bayesian context, among the criteria for explanation, the ratio of the observed marginal densities for two competing models, named Bayes Factor (BF), is commonly used for both model choice and model averaging (Kass and Raftery, J. Am. Stat. Ass., 1995). But BF does not apply to improper priors and, even when the prior is proper, it is not robust to the specification of the prior. These limitations can be extended to two famous penalized likelihood methods as the Akaike Information Criterion (AIC) and the Bayesian Information Criterion (BIC), since they are proved to be approximations of -2log BF . In the perspective that a model is as good as its predictions, the predictive information criteria aim at evaluating the predictive accuracy of Bayesian models or, in other words, at estimating expected out-of-sample prediction error using a bias-correction adjustment of within-sample error (Gelman et al., Stat. Comput., 2014). In particular, the Watanabe criterion is fully Bayesian because it averages the predictive distribution over the posterior distribution of parameters rather than conditioning on a point estimate, but it is hardly applicable to data which are not independent given parameters (Watanabe, J. Mach. Learn. Res., 2010). A solution is given by Ando and Tsay criterion where the joint density may be decomposed into the product of the conditional densities (Ando and Tsay, Int. J. Forecast., 2010). The above mentioned criteria are global summary measures of model performance, but more detailed analysis could be required to discover the reasons for poor global performance. In this latter case, a retrospective predictive analysis is performed on each individual observation. In this study we performed the Bayesian analysis of Italian data sets by four versions of a long-term hazard model known as the stress release model (Vere-Jones, J. Physics Earth, 1978; Bebbington and Harte, Geophys. J. Int., 2003; Varini and Rotondi, Environ. Ecol. Stat., 2015). Then we illustrate the results on their performance evaluated by Bayes Factor, predictive information criteria and retrospective predictive analysis.

An order statistics approach to the halo model for galaxies

NASA Astrophysics Data System (ADS)

Paul, Niladri; Paranjape, Aseem; Sheth, Ravi K.

2017-04-01

We use the halo model to explore the implications of assuming that galaxy luminosities in groups are randomly drawn from an underlying luminosity function. We show that even the simplest of such order statistics models - one in which this luminosity function p(L) is universal - naturally produces a number of features associated with previous analyses based on the 'central plus Poisson satellites' hypothesis. These include the monotonic relation of mean central luminosity with halo mass, the lognormal distribution around this mean and the tight relation between the central and satellite mass scales. In stark contrast to observations of galaxy clustering; however, this model predicts no luminosity dependence of large-scale clustering. We then show that an extended version of this model, based on the order statistics of a halo mass dependent luminosity function p(L|m), is in much better agreement with the clustering data as well as satellite luminosities, but systematically underpredicts central luminosities. This brings into focus the idea that central galaxies constitute a distinct population that is affected by different physical processes than are the satellites. We model this physical difference as a statistical brightening of the central luminosities, over and above the order statistics prediction. The magnitude gap between the brightest and second brightest group galaxy is predicted as a by-product, and is also in good agreement with observations. We propose that this order statistics framework provides a useful language in which to compare the halo model for galaxies with more physically motivated galaxy formation models.

Numerical Modeling of Pulsed Electrical Discharges for High-Speed Flow Control

DTIC Science & Technology

2012-02-01

dimensions , and later on more complex problems. Subsequent work compared different physical models for pulsed discharges: one-moment (drift-diffusion with...two dimensions , and later on more complex problems. Subsequent work compared different physical models for pulsed discharges: one-moment (drift...The state of a particle can be specified by its position and velocity. In principal, the motion of a large group of particles can be predicted from

Overhead Projector Spectrum of Polymethine Dye: A Physical Chemistry Demonstration.

ERIC Educational Resources Information Center

Solomon, Sally; Hur, Chinhyu

1995-01-01

Encourages the incorporation into lecture of live experiments that can be predicted or interpreted with abstract models. A demonstration is described where the position of the predominant peak of 1,1'-diethyl-4,4'-cyanine iodide is measured in class using an overhead projector spectrometer, then predicted using the model of a particle in a…

Prediction and Analysis of the Nonsteady Transition and Separation Processes on an Oscillating Wind Turbine Airfoil using the \\gamma-Re_\\theta Transition Model.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nandi, Taraj; Brasseur, James; Vijayakumar, Ganesh

2016-01-04

This study is aimed at gaining insight into the nonsteady transitional boundary layer dynamics of wind turbine blades and the predictive capabilities of URANS based transition and turbulence models for similar physics through the analysis of a controlled flow with similar nonsteady parameters.

A physical model for strain accumulation in the San Francisco Bay region: Stress evolution since 1838

USGS Publications Warehouse

Pollitz, F.; Bakun, W.H.; Nyst, M.

2004-01-01

Understanding of the behavior of plate boundary zones has progressed to the point where reasonably comprehensive physical models can predict their evolution. The San Andreas fault system in the San Francisco Bay region (SFBR) is dominated by a few major faults whose behavior over about one earthquake cycle is fairly well understood. By combining the past history of large ruptures on SFBR faults with a recently proposed physical model of strain accumulation in the SFBR, we derive the evolution of regional stress from 1838 until the present. This effort depends on (1) an existing compilation of the source properties of historic and contemporary SFBR earthquakes based on documented shaking, geodetic data, and seismic data (Bakun, 1999) and (2) a few key parameters of a simple regional viscoelastic coupling model constrained by recent GPS data (Pollitz and Nyst, 2004). Although uncertainties abound in the location, magnitude, and fault geometries of historic ruptures and the physical model relies on gross simplifications, the resulting stress evolution model is sufficiently detailed to provide a useful window into the past stress history. In the framework of Coulomb failure stress, we find that virtually all M ??? 5.8 earthquakes prior to 1906 and M ??? 5.5 earthquakes after 1906 are consistent with stress triggering from previous earthquakes. These events systematically lie in zones of predicted stress concentration elevated 5-10 bars above the regional average. The SFBR is predicted to have emerged from the 1906 "shadow" in about 1980, consistent with the acceleration in regional seismicity at that time. The stress evolution model may be a reliable indicator of the most likely areas to experience M ??? 5.5 shocks in the future.

Prediction of SOFC Performance with or without Experiments: A Study on Minimum Requirements for Experimental Data

DOE PAGES

Yang, Tao; Sezer, Hayri; Celik, Ismail B.; ...

2015-06-02

In the present paper, a physics-based procedure combining experiments and multi-physics numerical simulations is developed for overall analysis of SOFCs operational diagnostics and performance predictions. In this procedure, essential information for the fuel cell is extracted first by utilizing empirical polarization analysis in conjunction with experiments and refined by multi-physics numerical simulations via simultaneous analysis and calibration of polarization curve and impedance behavior. The performance at different utilization cases and operating currents is also predicted to confirm the accuracy of the proposed model. It is demonstrated that, with the present electrochemical model, three air/fuel flow conditions are needed to producemore » a set of complete data for better understanding of the processes occurring within SOFCs. After calibration against button cell experiments, the methodology can be used to assess performance of planar cell without further calibration. The proposed methodology would accelerate the calibration process and improve the efficiency of design and diagnostics.« less

Predicting physiological capacity of human load carriage - a review.

PubMed

Drain, Jace; Billing, Daniel; Neesham-Smith, Daniel; Aisbett, Brad

2016-01-01

This review article aims to evaluate a proposed maximum acceptable work duration model for load carriage tasks. It is contended that this concept has particular relevance to physically demanding occupations such as military and firefighting. Personnel in these occupations are often required to perform very physically demanding tasks, over varying time periods, often involving load carriage. Previous research has investigated concepts related to physiological workload limits in occupational settings (e.g. industrial). Evidence suggests however, that existing (unloaded) workload guidelines are not appropriate for load carriage tasks. The utility of this model warrants further work to enable prediction of load carriage durations across a range of functional workloads for physically demanding occupations. If the maximum duration for which personnel can physiologically sustain a load carriage task could be accurately predicted, commanders and supervisors could better plan for and manage tasks to ensure operational imperatives were met whilst minimising health risks for their workers. Copyright © 2015 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Inverse and Predictive Modeling

DOE Office of Scientific and Technical Information (OSTI.GOV)

Syracuse, Ellen Marie

The LANL Seismo-Acoustic team has a strong capability in developing data-driven models that accurately predict a variety of observations. These models range from the simple – one-dimensional models that are constrained by a single dataset and can be used for quick and efficient predictions – to the complex – multidimensional models that are constrained by several types of data and result in more accurate predictions. Team members typically build models of geophysical characteristics of Earth and source distributions at scales of 1 to 1000s of km, the techniques used are applicable for other types of physical characteristics at an evenmore » greater range of scales. The following cases provide a snapshot of some of the modeling work done by the Seismo- Acoustic team at LANL.« less

High-frequency techniques for RCS prediction of plate geometries and a physical optics/equivalent currents model for the RCS of trihedral corner reflectors, parts 1 and 2

NASA Technical Reports Server (NTRS)

Balanis, Constantine A.; Polka, Lesley A.; Polycarpou, Anastasis C.

1994-01-01

Formulations for scattering from the coated plate and the coated dihedral corner reflector are included. A coated plate model based upon the Uniform Theory of Diffraction (UTD) for impedance wedges was presented in the last report. In order to resolve inaccuracies and discontinuities in the predicted patterns using the UTD-based model, an improved model that uses more accurate diffraction coefficients is presented. A Physical Optics (PO) model for the coated dihedral corner reflector is presented as an intermediary step in developing a high-frequency model for this structure. The PO model is based upon the reflection coefficients for a metal-backed lossy material. Preliminary PO results for the dihedral corner reflector suggest that, in addition to being much faster computationally, this model may be more accurate than existing moment method (MM) models. An improved Physical Optics (PO)/Equivalent Currents model for modeling the Radar Cross Section (RCS) of both square and triangular, perfectly conducting, trihedral corner reflectors is presented. The new model uses the PO approximation at each reflection for the first- and second-order reflection terms. For the third-order reflection terms, a Geometrical Optics (GO) approximation is used for the first reflection; and PO approximations are used for the remaining reflections. The previously reported model used GO for all reflections except the terminating reflection. Using PO for most of the reflections results in a computationally slower model because many integrations must be performed numerically, but the advantage is that the predicted RCS using the new model is much more accurate. Comparisons between the two PO models, Finite-Difference Time-Domain (FDTD) and experimental data are presented for validation of the new model.

Stream Discharge and Evapotranspiration Responses to Climate Change and Their Associated Uncertainties in a Large Semi-Arid Basin

NASA Astrophysics Data System (ADS)

Bassam, S.; Ren, J.

2017-12-01

Predicting future water availability in watersheds is very important for proper water resources management, especially in semi-arid regions with scarce water resources. Hydrological models have been considered as powerful tools in predicting future hydrological conditions in watershed systems in the past two decades. Streamflow and evapotranspiration are the two important components in watershed water balance estimation as the former is the most commonly-used indicator of the overall water budget estimation, and the latter is the second biggest component of water budget (biggest outflow from the system). One of the main concerns in watershed scale hydrological modeling is the uncertainties associated with model prediction, which could arise from errors in model parameters and input meteorological data, or errors in model representation of the physics of hydrological processes. Understanding and quantifying these uncertainties are vital to water resources managers for proper decision making based on model predictions. In this study, we evaluated the impacts of different climate change scenarios on the future stream discharge and evapotranspiration, and their associated uncertainties, throughout a large semi-arid basin using a stochastically-calibrated, physically-based, semi-distributed hydrological model. The results of this study could provide valuable insights in applying hydrological models in large scale watersheds, understanding the associated sensitivity and uncertainties in model parameters, and estimating the corresponding impacts on interested hydrological process variables under different climate change scenarios.

Physical re-examination of parameters on a molecular collisions-based diffusion model for diffusivity prediction in polymers.

PubMed

Ohashi, Hidenori; Tamaki, Takanori; Yamaguchi, Takeo

2011-12-29

Molecular collisions, which are the microscopic origin of molecular diffusive motion, are affected by both the molecular surface area and the distance between molecules. Their product can be regarded as the free space around a penetrant molecule defined as the "shell-like free volume" and can be taken as a characteristic of molecular collisions. On the basis of this notion, a new diffusion theory has been developed. The model can predict molecular diffusivity in polymeric systems using only well-defined single-component parameters of molecular volume, molecular surface area, free volume, and pre-exponential factors. By consideration of the physical description of the model, the actual body moved and which neighbor molecules are collided with are the volume and the surface area of the penetrant molecular core. In the present study, a semiempirical quantum chemical calculation was used to calculate both of these parameters. The model and the newly developed parameters offer fairly good predictive ability. © 2011 American Chemical Society

Validating a Model for Welding Induced Residual Stress Using High-Energy X-ray Diffraction

DOE PAGES

Mach, J. C.; Budrow, C. J.; Pagan, D. C.; ...

2017-03-15

Integrated computational materials engineering (ICME) provides a pathway to advance performance in structures through the use of physically-based models to better understand how manufacturing processes influence product performance. As one particular challenge, consider that residual stresses induced in fabrication are pervasive and directly impact the life of structures. For ICME to be an effective strategy, it is essential that predictive capability be developed in conjunction with critical experiments. In the present paper, simulation results from a multi-physics model for gas metal arc welding are evaluated through x-ray diffraction using synchrotron radiation. A test component was designed with intent to developmore » significant gradients in residual stress, be representative of real-world engineering application, yet remain tractable for finely spaced strain measurements with positioning equipment available at synchrotron facilities. Finally, the experimental validation lends confidence to model predictions, facilitating the explicit consideration of residual stress distribution in prediction of fatigue life.« less

Correlation Imaging Reveals Specific Crowding Dynamics of Kinesin Motor Proteins

NASA Astrophysics Data System (ADS)

Miedema, Daniël M.; Kushwaha, Vandana S.; Denisov, Dmitry V.; Acar, Seyda; Nienhuis, Bernard; Peterman, Erwin J. G.; Schall, Peter

2017-10-01

Molecular motor proteins fulfill the critical function of transporting organelles and other building blocks along the biopolymer network of the cell's cytoskeleton, but crowding effects are believed to crucially affect this motor-driven transport due to motor interactions. Physical transport models, like the paradigmatic, totally asymmetric simple exclusion process (TASEP), have been used to predict these crowding effects based on simple exclusion interactions, but verifying them in experiments remains challenging. Here, we introduce a correlation imaging technique to precisely measure the motor density, velocity, and run length along filaments under crowding conditions, enabling us to elucidate the physical nature of crowding and test TASEP model predictions. Using the kinesin motor proteins kinesin-1 and OSM-3, we identify crowding effects in qualitative agreement with TASEP predictions, and we achieve excellent quantitative agreement by extending the model with motor-specific interaction ranges and crowding-dependent detachment probabilities. These results confirm the applicability of basic nonequilibrium models to the intracellular transport and highlight motor-specific strategies to deal with crowding.

Validating a Model for Welding Induced Residual Stress Using High-Energy X-ray Diffraction

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mach, J. C.; Budrow, C. J.; Pagan, D. C.

Integrated computational materials engineering (ICME) provides a pathway to advance performance in structures through the use of physically-based models to better understand how manufacturing processes influence product performance. As one particular challenge, consider that residual stresses induced in fabrication are pervasive and directly impact the life of structures. For ICME to be an effective strategy, it is essential that predictive capability be developed in conjunction with critical experiments. In the present paper, simulation results from a multi-physics model for gas metal arc welding are evaluated through x-ray diffraction using synchrotron radiation. A test component was designed with intent to developmore » significant gradients in residual stress, be representative of real-world engineering application, yet remain tractable for finely spaced strain measurements with positioning equipment available at synchrotron facilities. Finally, the experimental validation lends confidence to model predictions, facilitating the explicit consideration of residual stress distribution in prediction of fatigue life.« less

A hybrid deep neural network and physically based distributed model for river stage prediction

NASA Astrophysics Data System (ADS)

hitokoto, Masayuki; sakuraba, Masaaki

2016-04-01

We developed the real-time river stage prediction model, using the hybrid deep neural network and physically based distributed model. As the basic model, 4 layer feed-forward artificial neural network (ANN) was used. As a network training method, the deep learning technique was applied. To optimize the network weight, the stochastic gradient descent method based on the back propagation method was used. As a pre-training method, the denoising autoencoder was used. Input of the ANN model is hourly change of water level and hourly rainfall, output data is water level of downstream station. In general, the desirable input of the ANN has strong correlation with the output. In conceptual hydrological model such as tank model and storage-function model, river discharge is governed by the catchment storage. Therefore, the change of the catchment storage, downstream discharge subtracted from rainfall, can be the potent input candidate of the ANN model instead of rainfall. From this point of view, the hybrid deep neural network and physically based distributed model was developed. The prediction procedure of the hybrid model is as follows; first, downstream discharge was calculated by the distributed model, and then estimates the hourly change of catchment storage form rainfall and calculated discharge as the input of the ANN model, and finally the ANN model was calculated. In the training phase, hourly change of catchment storage can be calculated by the observed rainfall and discharge data. The developed model was applied to the one catchment of the OOYODO River, one of the first-grade river in Japan. The modeled catchment is 695 square km. For the training data, 5 water level gauging station and 14 rain-gauge station in the catchment was used. The training floods, superior 24 events, were selected during the period of 2005-2014. Prediction was made up to 6 hours, and 6 models were developed for each prediction time. To set the proper learning parameters and network architecture of the ANN model, sensitivity analysis was done by the case study approach. The prediction result was evaluated by the superior 4 flood events by the leave-one-out cross validation. The prediction result of the basic 4 layer ANN was better than the conventional 3 layer ANN model. However, the result did not reproduce well the biggest flood event, supposedly because the lack of the sufficient high-water level flood event in the training data. The result of the hybrid model outperforms the basic ANN model and distributed model, especially improved the performance of the basic ANN model in the biggest flood event.

A closed-loop hybrid physiological model relating to subjects under physical stress.

PubMed

El-Samahy, Emad; Mahfouf, Mahdi; Linkens, Derek A

2006-11-01

The objective of this research study is to derive a comprehensive physiological model relating to subjects under physical stress conditions. The model should describe the behaviour of the cardiovascular system, respiratory system, thermoregulation and brain activity in response to physical workload. An experimental testing rig was built which consists of recumbent high performance bicycle for inducing the physical load and a data acquisition system comprising monitors and PCs. The signals acquired and used within this study are the blood pressure, heart rate, respiration, body temperature, and EEG signals. The proposed model is based on a grey-box based modelling approach which was used because of the sufficient level of details it provides. Cardiovascular and EEG Data relating to 16 healthy subject volunteers (data from 12 subjects were used for training/validation and the data from 4 subjects were used for model testing) were collected using the Finapres and the ProComp+ monitors. For model validation, residual analysis via the computing of the confidence intervals as well as related histograms was performed. Closed-loop simulations for different subjects showed that the model can provide reliable predictions for heart rate, blood pressure, body temperature, respiration, and the EEG signals. These findings were also reinforced by the residual analyses data obtained, which suggested that the residuals were within the 90% confidence bands and that the corresponding histograms were of a normal distribution. A higher intelligent level was added to the model, based on neural networks, to extend the capabilities of the model to predict over a wide range of subjects dynamics. The elicited physiological model describing the effect of physiological stress on several physiological variables can be used to predict performance breakdown of operators in critical environments. Such a model architecture lends itself naturally to exploitation via feedback control in a 'reverse-engineering' fashion to control stress via the specification of a safe operating range for the psycho-physiological variables.

A predictive estimation method for carbon dioxide transport by data-driven modeling with a physically-based data model.

PubMed

Jeong, Jina; Park, Eungyu; Han, Weon Shik; Kim, Kue-Young; Jun, Seong-Chun; Choung, Sungwook; Yun, Seong-Taek; Oh, Junho; Kim, Hyun-Jun

2017-11-01

In this study, a data-driven method for predicting CO 2 leaks and associated concentrations from geological CO 2 sequestration is developed. Several candidate models are compared based on their reproducibility and predictive capability for CO 2 concentration measurements from the Environment Impact Evaluation Test (EIT) site in Korea. Based on the data mining results, a one-dimensional solution of the advective-dispersive equation for steady flow (i.e., Ogata-Banks solution) is found to be most representative for the test data, and this model is adopted as the data model for the developed method. In the validation step, the method is applied to estimate future CO 2 concentrations with the reference estimation by the Ogata-Banks solution, where a part of earlier data is used as the training dataset. From the analysis, it is found that the ensemble mean of multiple estimations based on the developed method shows high prediction accuracy relative to the reference estimation. In addition, the majority of the data to be predicted are included in the proposed quantile interval, which suggests adequate representation of the uncertainty by the developed method. Therefore, the incorporation of a reasonable physically-based data model enhances the prediction capability of the data-driven model. The proposed method is not confined to estimations of CO 2 concentration and may be applied to various real-time monitoring data from subsurface sites to develop automated control, management or decision-making systems. Copyright © 2017 Elsevier B.V. All rights reserved.

Near Identifiability of Dynamical Systems

NASA Technical Reports Server (NTRS)

Hadaegh, F. Y.; Bekey, G. A.

1987-01-01

Concepts regarding approximate mathematical models treated rigorously. Paper presents new results in analysis of structural identifiability, equivalence, and near equivalence between mathematical models and physical processes they represent. Helps establish rigorous mathematical basis for concepts related to structural identifiability and equivalence revealing fundamental requirements, tacit assumptions, and sources of error. "Structural identifiability," as used by workers in this field, loosely translates as meaning ability to specify unique mathematical model and set of model parameters that accurately predict behavior of corresponding physical system.

Meteorological Processes Affecting Air Quality – Research and Model Development Needs

EPA Science Inventory

Meteorology modeling is an important component of air quality modeling systems that defines the physical and dynamical environment for atmospheric chemistry. The meteorology models used for air quality applications are based on numerical weather prediction models that were devel...

Lesbian, gay, & bisexual older adults: linking internal minority stressors, chronic health conditions, and depression.

PubMed

Hoy-Ellis, Charles P; Fredriksen-Goldsen, Karen I

2016-11-01

This study aims to: (1) test whether the minority stressors disclosure of sexual orientation; and (2) internalized heterosexism are predictive of chronic physical health conditions; and (3) depression; (4) to test direct and indirect relationships between these variables; and (5) whether chronic physical health conditions are further predictive of depression, net of disclosure of sexual orientation and internalized heterosexism. Secondary analysis of national, community-based surveys of 2349 lesbian, gay, and bisexual adults aged 50 and older residing in the US utilizing structural equation modeling. Congruent with minority stress theory, disclosure of sexual orientation is indirectly associated with chronic physical health conditions and depression, mediated by internalized heterosexism with a suppressor effect. Internalized heterosexism is directly associated with chronic physical health conditions and depression, and further indirectly associated with depression mediated by chronic physical health conditions. Finally, chronic physical health conditions have an additional direct relationship with depression, net of other predictor variables. Minority stressors and chronic physical health conditions independently and collectively predict depression, possibly a synergistic effect. Implications for depression among older sexual minority adults are discussed.

Estimation of the Viscosities of Liquid Sn-Based Binary Lead-Free Solder Alloys

NASA Astrophysics Data System (ADS)

Wu, Min; Li, Jinquan

2018-01-01

The viscosity of a binary Sn-based lead-free solder alloy was calculated by combining the predicted model with the Miedema model. The viscosity factor was proposed and the relationship between the viscosity and surface tension was analyzed as well. The investigation result shows that the viscosity of Sn-based lead-free solders predicted from the predicted model shows excellent agreement with the reported values. The viscosity factor is determined by three physical parameters: atomic volume, electronic density, and electro-negativity. In addition, the apparent correlation between the surface tension and viscosity of the binary Sn-based Pb-free solder was obtained based on the predicted model.

An articulated predictive model for fluid-free artificial basilar membrane as broadband frequency sensor

NASA Astrophysics Data System (ADS)

Ahmed, Riaz; Banerjee, Sourav

2018-02-01

In this article, an extremely versatile predictive model for a newly developed Basilar meta-Membrane (BM2) sensors is reported with variable engineering parameters that contribute to it's frequency selection capabilities. The predictive model reported herein is for advancement over existing method by incorporating versatile and nonhomogeneous (e.g. functionally graded) model parameters that could not only exploit the possibilities of creating complex combinations of broadband frequency sensors but also explain the unique unexplained physical phenomenon that prevails in BM2, e.g. tailgating waves. In recent years, few notable attempts were made to fabricate the artificial basilar membrane, mimicking the mechanics of the human cochlea within a very short range of frequencies. To explain the operation of these sensors a few models were proposed. But, we fundamentally argue the "fabrication to explanation" approach and proposed the model driven predictive design process for the design any (BM2) as broadband sensors. Inspired by the physics of basilar membrane, frequency domain predictive model is proposed where both the material and geometrical parameters can be arbitrarily varied. Broadband frequency is applicable in many fields of science, engineering and technology, such as, sensors for chemical, biological and acoustic applications. With the proposed model, which is three times faster than its FEM counterpart, it is possible to alter the attributes of the selected length of the designed sensor using complex combinations of model parameters, based on target frequency applications. Finally, the tailgating wave peaks in the artificial basilar membranes that prevails in the previously reported experimental studies are also explained using the proposed model.

A review of numerical models to predict the atmospheric dispersion of radionuclides.

PubMed

Leelőssy, Ádám; Lagzi, István; Kovács, Attila; Mészáros, Róbert

2018-02-01

The field of atmospheric dispersion modeling has evolved together with nuclear risk assessment and emergency response systems. Atmospheric concentration and deposition of radionuclides originating from an unintended release provide the basis of dose estimations and countermeasure strategies. To predict the atmospheric dispersion and deposition of radionuclides several numerical models are available coupled with numerical weather prediction (NWP) systems. This work provides a review of the main concepts and different approaches of atmospheric dispersion modeling. Key processes of the atmospheric transport of radionuclides are emission, advection, turbulent diffusion, dry and wet deposition, radioactive decay and other physical and chemical transformations. A wide range of modeling software are available to simulate these processes with different physical assumptions, numerical approaches and implementation. The most appropriate modeling tool for a specific purpose can be selected based on the spatial scale, the complexity of meteorology, land surface and physical and chemical transformations, also considering the available data and computational resource. For most regulatory and operational applications, offline coupled NWP-dispersion systems are used, either with a local scale Gaussian, or a regional to global scale Eulerian or Lagrangian approach. The dispersion model results show large sensitivity on the accuracy of the coupled NWP model, especially through the description of planetary boundary layer turbulence, deep convection and wet deposition. Improvement of dispersion predictions can be achieved by online coupling of mesoscale meteorology and atmospheric transport models. The 2011 Fukushima event was the first large-scale nuclear accident where real-time prognostic dispersion modeling provided decision support. Dozens of dispersion models with different approaches were used for prognostic and retrospective simulations of the Fukushima release. An unknown release rate proved to be the largest factor of uncertainty, underlining the importance of inverse modeling and data assimilation in future developments. Copyright © 2017 Elsevier Ltd. All rights reserved.

Molecular mobility in amorphous state: Implications on physical stability

NASA Astrophysics Data System (ADS)

Bhardwaj, Sunny Piyush

Amorphous pharmaceuticals are desirable in drug development due to their advantageous biopharmaceutical properties of higher apparent aqueous solubility and dissolution rate. The main obstacle in their widespread use, however, is their higher physicochemical instability than their crystalline counterparts. The goal of the present research project was to investigate correlations between the molecular mobility and physical stability in model amorphous compounds. The objective was to identify the specific mobility which is responsible for the physical instability in each case. This will potentially enable the development of effective strategies for the stabilization of amorphous pharmaceuticals. Moreover, these correlations can be used to develop predictive models for the stability at the pharmaceutically relevant storage conditions. Subtraction of dc conductivity enabled the comprehensive characterization of molecular mobility in amorphous trehalose. This was followed by investigation of correlation between crystallization behavior and different relaxations. Global mobility was found to be strongly coupled to both crystallization onset time and rate. Different preparation methods imparted different mobility states to amorphous trehalose which was postulated to be the reason for the significant physical stability differences. Predictive models were developed and a good agreement was found between the predicted and the experimental crystallization onset times at temperatures around and below the glass transition temperature (Tg). Effect of annealing was investigated on water sorption, enthalpic recovery and dielectric relaxation times in amorphous trehalose. Global mobility was found to be linearly correlated to the water sorption potential which enabled the development of predictive models. Global mobility was also found to be strongly correlated to physical instability in amorphous itraconazole. Effect of polymer (PVP and HPMCAS) on itraconazole mobility and stability was also evaluated. Global mobility was found to be correlated to stability in both the solid dispersions. HPMCAS was found to be a better stabilizer than PVP due to its pronounced effect on global mobility.

Predicting remaining life by fusing the physics of failure modeling with diagnostics

NASA Astrophysics Data System (ADS)

Kacprzynski, G. J.; Sarlashkar, A.; Roemer, M. J.; Hess, A.; Hardman, B.

2004-03-01

Technology that enables failure prediction of critical machine components (prognostics) has the potential to significantly reduce maintenance costs and increase availability and safety. This article summarizes a research effort funded through the U.S. Defense Advanced Research Projects Agency and Naval Air System Command aimed at enhancing prognostic accuracy through more advanced physics-of-failure modeling and intelligent utilization of relevant diagnostic information. H-60 helicopter gear is used as a case study to introduce both stochastic sub-zone crack initiation and three-dimensional fracture mechanics lifing models along with adaptive model updating techniques for tuning key failure mode variables at a local material/damage site based on fused vibration features. The overall prognostic scheme is aimed at minimizing inherent modeling and operational uncertainties via sensed system measurements that evolve as damage progresses.

Physical fitness predicts technical-tactical and time-motion profile in simulated Judo and Brazilian Jiu-Jitsu matches.

PubMed

Coswig, Victor S; Gentil, Paulo; Bueno, João C A; Follmer, Bruno; Marques, Vitor A; Del Vecchio, Fabrício B

2018-01-01

Among combat sports, Judo and Brazilian Jiu-Jitsu (BJJ) present elevated physical fitness demands from the high-intensity intermittent efforts. However, information regarding how metabolic and neuromuscular physical fitness is associated with technical-tactical performance in Judo and BJJ fights is not available. This study aimed to relate indicators of physical fitness with combat performance variables in Judo and BJJ. The sample consisted of Judo ( n  = 16) and BJJ ( n  = 24) male athletes. At the first meeting, the physical tests were applied and, in the second, simulated fights were performed for later notational analysis. The main findings indicate: (i) high reproducibility of the proposed instrument and protocol used for notational analysis in a mobile device; (ii) differences in the technical-tactical and time-motion patterns between modalities; (iii) performance-related variables are different in Judo and BJJ; and (iv) regression models based on metabolic fitness variables may account for up to 53% of the variances in technical-tactical and/or time-motion variables in Judo and up to 31% in BJJ, whereas neuromuscular fitness models can reach values up to 44 and 73% of prediction in Judo and BJJ, respectively. When all components are combined, they can explain up to 90% of high intensity actions in Judo. In conclusion, performance prediction models in simulated combat indicate that anaerobic, aerobic and neuromuscular fitness variables contribute to explain time-motion variables associated with high intensity and technical-tactical variables in Judo and BJJ fights.

Evaluation of SCS-CN method using a fully distributed physically based coupled surface-subsurface flow model

NASA Astrophysics Data System (ADS)

Shokri, Ali

2017-04-01

The hydrological cycle contains a wide range of linked surface and subsurface flow processes. In spite of natural connections between surface water and groundwater, historically, these processes have been studied separately. The current trend in hydrological distributed physically based model development is to combine distributed surface water models with distributed subsurface flow models. This combination results in a better estimation of the temporal and spatial variability of the interaction between surface and subsurface flow. On the other hand, simple lumped models such as the Soil Conservation Service Curve Number (SCS-CN) are still quite common because of their simplicity. In spite of the popularity of the SCS-CN method, there have always been concerns about the ambiguity of the SCS-CN method in explaining physical mechanism of rainfall-runoff processes. The aim of this study is to minimize these ambiguity by establishing a method to find an equivalence of the SCS-CN solution to the DrainFlow model, which is a fully distributed physically based coupled surface-subsurface flow model. In this paper, two hypothetical v-catchment tests are designed and the direct runoff from a storm event are calculated by both SCS-CN and DrainFlow models. To find a comparable solution to runoff prediction through the SCS-CN and DrainFlow, the variance between runoff predictions by the two models are minimized by changing Curve Number (CN) and initial abstraction (Ia) values. Results of this study have led to a set of lumped model parameters (CN and Ia) for each catchment that is comparable to a set of physically based parameters including hydraulic conductivity, Manning roughness coefficient, ground surface slope, and specific storage. Considering the lack of physical interpretation in CN and Ia is often argued as a weakness of SCS-CN method, the novel method in this paper gives a physical explanation to CN and Ia.

A New Navigation Satellite Clock Bias Prediction Method Based on Modified Clock-bias Quadratic Polynomial Model

NASA Astrophysics Data System (ADS)

Wang, Y. P.; Lu, Z. P.; Sun, D. S.; Wang, N.

2016-01-01

In order to better express the characteristics of satellite clock bias (SCB) and improve SCB prediction precision, this paper proposed a new SCB prediction model which can take physical characteristics of space-borne atomic clock, the cyclic variation, and random part of SCB into consideration. First, the new model employs a quadratic polynomial model with periodic items to fit and extract the trend term and cyclic term of SCB; then based on the characteristics of fitting residuals, a time series ARIMA ~(Auto-Regressive Integrated Moving Average) model is used to model the residuals; eventually, the results from the two models are combined to obtain final SCB prediction values. At last, this paper uses precise SCB data from IGS (International GNSS Service) to conduct prediction tests, and the results show that the proposed model is effective and has better prediction performance compared with the quadratic polynomial model, grey model, and ARIMA model. In addition, the new method can also overcome the insufficiency of the ARIMA model in model recognition and order determination.

FireStem2D — A two-dimensional heat transfer model for simulating tree stem injury in fires

Treesearch

Efthalia K. Chatziefstratiou; Gil Bohrer; Anthony S. Bova; Ravishankar Subramanian; Renato P.M. Frasson; Amy Scherzer; Bret W. Butler; Matthew B. Dickinson

2013-01-01

FireStem2D, a software tool for predicting tree stem heating and injury in forest fires, is a physically-based, two-dimensional model of stem thermodynamics that results from heating at the bark surface. It builds on an earlier one-dimensional model (FireStem) and provides improved capabilities for predicting fire-induced mortality and injury before a fire occurs by...

Sound transmission in the chest under surface excitation - An experimental and computational study with diagnostic applications

PubMed Central

Peng, Ying; Dai, Zoujun; Mansy, Hansen A.; Sandler, Richard H.; Balk, Robert A; Royston, Thomas. J

2014-01-01

Chest physical examination often includes performing chest percussion, which involves introducing sound stimulus to the chest wall and detecting an audible change. This approach relies on observations that underlying acoustic transmission, coupling, and resonance patterns can be altered by chest structure changes due to pathologies. More accurate detection and quantification of these acoustic alterations may provide further useful diagnostic information. To elucidate the physical processes involved, a realistic computer model of sound transmission in the chest is helpful. In the present study, a computational model was developed and validated by comparing its predictions with results from animal and human experiments which involved applying acoustic excitation to the anterior chest while detecting skin vibrations at the posterior chest. To investigate the effect of pathology on sound transmission, the computational model was used to simulate the effects of pneumothorax on sounds introduced at the anterior chest and detected at the posterior. Model predictions and experimental results showed similar trends. The model also predicted wave patterns inside the chest, which may be used to assess results of elastography measurements. Future animal and human tests may expand the predictive power of the model to include acoustic behavior for a wider range of pulmonary conditions. PMID:25001497

Accuracy of gap analysis habitat models in predicting physical features for wildlife-habitat associations in the southwest U.S.

USGS Publications Warehouse

Boykin, K.G.; Thompson, B.C.; Propeck-Gray, S.

2010-01-01

Despite widespread and long-standing efforts to model wildlife-habitat associations using remotely sensed and other spatially explicit data, there are relatively few evaluations of the performance of variables included in predictive models relative to actual features on the landscape. As part of the National Gap Analysis Program, we specifically examined physical site features at randomly selected sample locations in the Southwestern U.S. to assess degree of concordance with predicted features used in modeling vertebrate habitat distribution. Our analysis considered hypotheses about relative accuracy with respect to 30 vertebrate species selected to represent the spectrum of habitat generalist to specialist and categorization of site by relative degree of conservation emphasis accorded to the site. Overall comparison of 19 variables observed at 382 sample sites indicated ???60% concordance for 12 variables. Directly measured or observed variables (slope, soil composition, rock outcrop) generally displayed high concordance, while variables that required judgments regarding descriptive categories (aspect, ecological system, landform) were less concordant. There were no differences detected in concordance among taxa groups, degree of specialization or generalization of selected taxa, or land conservation categorization of sample sites with respect to all sites. We found no support for the hypothesis that accuracy of habitat models is inversely related to degree of taxa specialization when model features for a habitat specialist could be more difficult to represent spatially. Likewise, we did not find support for the hypothesis that physical features will be predicted with higher accuracy on lands with greater dedication to biodiversity conservation than on other lands because of relative differences regarding available information. Accuracy generally was similar (>60%) to that observed for land cover mapping at the ecological system level. These patterns demonstrate resilience of gap analysis deductive model processes to the type of remotely sensed or interpreted data used in habitat feature predictions. ?? 2010 Elsevier B.V.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Smith, Kandler A; Santhanagopalan, Shriram; Yang, Chuanbo

Computer models are helping to accelerate the design and validation of next generation batteries and provide valuable insights not possible through experimental testing alone. Validated 3-D physics-based models exist for predicting electrochemical performance, thermal and mechanical response of cells and packs under normal and abuse scenarios. The talk describes present efforts to make the models better suited for engineering design, including improving their computation speed, developing faster processes for model parameter identification including under aging, and predicting the performance of a proposed electrode material recipe a priori using microstructure models.

Interoceptive predictions in the brain

PubMed Central

Barrett, Lisa Feldman; Simmons, W. Kyle

2016-01-01

Intuition suggests that perception follows sensation and therefore bodily feelings originate in the body. However, recent evidence goes against this logic: interoceptive experience may largely reflect limbic predictions about the expected state of the body that are constrained by ascending visceral sensations. In this Opinion article, we introduce the Embodied Predictive Interoception Coding model, which integrates an anatomical model of corticocortical connections with Bayesian active inference principles, to propose that agranular visceromotor cortices contribute to interoception by issuing interoceptive predictions. We then discuss how disruptions in interoceptive predictions could function as a common vulnerability for mental and physical illness. PMID:26016744

Hot limpets: predicting body temperature in a conductance-mediated thermal system.

PubMed

Denny, Mark W; Harley, Christopher D G

2006-07-01

Living at the interface between the marine and terrestrial environments, intertidal organisms may serve as a bellwether for environmental change and a test of our ability to predict its biological consequences. However, current models do not allow us to predict the body temperature of intertidal organisms whose heat budgets are strongly affected by conduction to and from the substratum. Here, we propose a simple heat-budget model of one such animal, the limpet Lottia gigantea, and test the model against measurements made in the field. Working solely from easily measured physical and meteorological inputs, the model predicts the daily maximal body temperatures of live limpets within a fraction of a degree, suggesting that it may be a useful tool for exploring the thermal biology of limpets and for predicting effects of climate change. The model can easily be adapted to predict the temperatures of chitons, acorn barnacles, keyhole limpets, and encrusting animals and plants.

Physical Activity Predicts Performance in an Unpracticed Bimanual Coordination Task.

PubMed

Boisgontier, Matthieu P; Serbruyns, Leen; Swinnen, Stephan P

2017-01-01

Practice of a given physical activity is known to improve the motor skills related to this activity. However, whether unrelated skills are also improved is still unclear. To test the impact of physical activity on an unpracticed motor task, 26 young adults completed the international physical activity questionnaire and performed a bimanual coordination task they had never practiced before. Results showed that higher total physical activity predicted higher performance in the bimanual task, controlling for multiple factors such as age, physical inactivity, music practice, and computer games practice. Linear mixed models allowed this effect of physical activity to be generalized to a large population of bimanual coordination conditions. This finding runs counter to the notion that generalized motor abilities do not exist and supports the existence of a "learning to learn" skill that could be improved through physical activity and that impacts performance in tasks that are not necessarily related to the practiced activity.

Predicting Energy Performance of a Net-Zero Energy Building: A Statistical Approach

PubMed Central

Kneifel, Joshua; Webb, David

2016-01-01

Performance-based building requirements have become more prevalent because it gives freedom in building design while still maintaining or exceeding the energy performance required by prescriptive-based requirements. In order to determine if building designs reach target energy efficiency improvements, it is necessary to estimate the energy performance of a building using predictive models and different weather conditions. Physics-based whole building energy simulation modeling is the most common approach. However, these physics-based models include underlying assumptions and require significant amounts of information in order to specify the input parameter values. An alternative approach to test the performance of a building is to develop a statistically derived predictive regression model using post-occupancy data that can accurately predict energy consumption and production based on a few common weather-based factors, thus requiring less information than simulation models. A regression model based on measured data should be able to predict energy performance of a building for a given day as long as the weather conditions are similar to those during the data collection time frame. This article uses data from the National Institute of Standards and Technology (NIST) Net-Zero Energy Residential Test Facility (NZERTF) to develop and validate a regression model to predict the energy performance of the NZERTF using two weather variables aggregated to the daily level, applies the model to estimate the energy performance of hypothetical NZERTFs located in different cities in the Mixed-Humid climate zone, and compares these estimates to the results from already existing EnergyPlus whole building energy simulations. This regression model exhibits agreement with EnergyPlus predictive trends in energy production and net consumption, but differs greatly in energy consumption. The model can be used as a framework for alternative and more complex models based on the experimental data collected from the NZERTF. PMID:27956756

Predicting Energy Performance of a Net-Zero Energy Building: A Statistical Approach.

PubMed

Kneifel, Joshua; Webb, David

2016-09-01

Performance-based building requirements have become more prevalent because it gives freedom in building design while still maintaining or exceeding the energy performance required by prescriptive-based requirements. In order to determine if building designs reach target energy efficiency improvements, it is necessary to estimate the energy performance of a building using predictive models and different weather conditions. Physics-based whole building energy simulation modeling is the most common approach. However, these physics-based models include underlying assumptions and require significant amounts of information in order to specify the input parameter values. An alternative approach to test the performance of a building is to develop a statistically derived predictive regression model using post-occupancy data that can accurately predict energy consumption and production based on a few common weather-based factors, thus requiring less information than simulation models. A regression model based on measured data should be able to predict energy performance of a building for a given day as long as the weather conditions are similar to those during the data collection time frame. This article uses data from the National Institute of Standards and Technology (NIST) Net-Zero Energy Residential Test Facility (NZERTF) to develop and validate a regression model to predict the energy performance of the NZERTF using two weather variables aggregated to the daily level, applies the model to estimate the energy performance of hypothetical NZERTFs located in different cities in the Mixed-Humid climate zone, and compares these estimates to the results from already existing EnergyPlus whole building energy simulations. This regression model exhibits agreement with EnergyPlus predictive trends in energy production and net consumption, but differs greatly in energy consumption. The model can be used as a framework for alternative and more complex models based on the experimental data collected from the NZERTF.

Rock physics model-based prediction of shear wave velocity in the Barnett Shale formation

NASA Astrophysics Data System (ADS)

Guo, Zhiqi; Li, Xiang-Yang

2015-06-01

Predicting S-wave velocity is important for reservoir characterization and fluid identification in unconventional resources. A rock physics model-based method is developed for estimating pore aspect ratio and predicting shear wave velocity Vs from the information of P-wave velocity, porosity and mineralogy in a borehole. Statistical distribution of pore geometry is considered in the rock physics models. In the application to the Barnett formation, we compare the high frequency self-consistent approximation (SCA) method that corresponds to isolated pore spaces, and the low frequency SCA-Gassmann method that describes well-connected pore spaces. Inversion results indicate that compared to the surroundings, the Barnett Shale shows less fluctuation in the pore aspect ratio in spite of complex constituents in the shale. The high frequency method provides a more robust and accurate prediction of Vs for all the three intervals in the Barnett formation, while the low frequency method collapses for the Barnett Shale interval. Possible causes for this discrepancy can be explained by the fact that poor in situ pore connectivity and low permeability make well-log sonic frequencies act as high frequencies and thus invalidate the low frequency assumption of the Gassmann theory. In comparison, for the overlying Marble Falls and underlying Ellenburger carbonates, both the high and low frequency methods predict Vs with reasonable accuracy, which may reveal that sonic frequencies are within the transition frequencies zone due to higher pore connectivity in the surroundings.

Physical Activity, Sleep, and Nutrition Do Not Predict Cognitive Performance in Young and Middle-Aged Adults.

PubMed

Gijselaers, Hieronymus J M; Elena, Barberà; Kirschner, Paul A; de Groot, Renate H M

2016-01-01

Biological lifestyle factors (BLFs) such as physical activity, sleep, and nutrition play a role in cognitive functioning. Research concerning the relation between BLFs and cognitive performance is scarce however, especially in young and middle-aged adults. Research has not yet focused on a multidisciplinary approach with respect to this relation in the abovementioned population, where lifestyle habits are more stable. The aim of this study was to examine the contribution of these BLFs to cognitive performance. Path analysis was conducted in an observational study in which 1131 adults were analyzed using a cross-validation approach. Participants provided information on physical activity, sedentary behavior, chronotype, sleep duration, sleep quality, and the consumption of breakfast, fish, and caffeine via a survey. Their cognitive performance was measured using objective digital cognitive tests. Exploration yielded a predictive cohesive model that fitted the data properly, χ(2) /df = 0.8, CFI = 1.00, RMSEA < 0.001, SRMR = 0.016. Validation of the developed model indicated that the model fitted the data satisfactorily, χ(2) /df = 2.75, CFI = 0.95, RMSEA < 0.056, SRMR = 0.035. None of the variables within the BLFs were predictive for any of the cognitive performance measures, except for sedentary behavior. Although sedentary behavior was positively predictive for processing speed its contribution was small and unclear. The results indicate that the variables within the BLFs do not predict cognitive performance in young and middle-aged adults.

Power maximization of a point absorber wave energy converter using improved model predictive control

NASA Astrophysics Data System (ADS)

Milani, Farideh; Moghaddam, Reihaneh Kardehi

2017-08-01

This paper considers controlling and maximizing the absorbed power of wave energy converters for irregular waves. With respect to physical constraints of the system, a model predictive control is applied. Irregular waves' behavior is predicted by Kalman filter method. Owing to the great influence of controller parameters on the absorbed power, these parameters are optimized by imperialist competitive algorithm. The results illustrate the method's efficiency in maximizing the extracted power in the presence of unknown excitation force which should be predicted by Kalman filter.

Recent advances in hypersonic technology

NASA Technical Reports Server (NTRS)

Dwoyer, Douglas L.

1990-01-01

This paper will focus on recent advances in hypersonic aerodynamic prediction techniques. Current capabilities of existing numerical methods for predicting high Mach number flows will be discussed and shortcomings will be identified. Physical models available for inclusion into modern codes for predicting the effects of transition and turbulence will also be outlined and their limitations identified. Chemical reaction models appropriate to high-speed flows will be addressed, and the impact of their inclusion in computational fluid dynamics codes will be discussed. Finally, the problem of validating predictive techniques for high Mach number flows will be addressed.

ANEMOS: Development of a next generation wind power forecasting system for the large-scale integration of onshore and offshore wind farms.

NASA Astrophysics Data System (ADS)

Kariniotakis, G.; Anemos Team

2003-04-01

Objectives: Accurate forecasting of the wind energy production up to two days ahead is recognized as a major contribution for reliable large-scale wind power integration. Especially, in a liberalized electricity market, prediction tools enhance the position of wind energy compared to other forms of dispatchable generation. ANEMOS, is a new 3.5 years R&D project supported by the European Commission, that resembles research organizations and end-users with an important experience on the domain. The project aims to develop advanced forecasting models that will substantially outperform current methods. Emphasis is given to situations like complex terrain, extreme weather conditions, as well as to offshore prediction for which no specific tools currently exist. The prediction models will be implemented in a software platform and installed for online operation at onshore and offshore wind farms by the end-users participating in the project. Approach: The paper presents the methodology of the project. Initially, the prediction requirements are identified according to the profiles of the end-users. The project develops prediction models based on both a physical and an alternative statistical approach. Research on physical models gives emphasis to techniques for use in complex terrain and the development of prediction tools based on CFD techniques, advanced model output statistics or high-resolution meteorological information. Statistical models (i.e. based on artificial intelligence) are developed for downscaling, power curve representation, upscaling for prediction at regional or national level, etc. A benchmarking process is set-up to evaluate the performance of the developed models and to compare them with existing ones using a number of case studies. The synergy between statistical and physical approaches is examined to identify promising areas for further improvement of forecasting accuracy. Appropriate physical and statistical prediction models are also developed for offshore wind farms taking into account advances in marine meteorology (interaction between wind and waves, coastal effects). The benefits from the use of satellite radar images for modeling local weather patterns are investigated. A next generation forecasting software, ANEMOS, will be developed to integrate the various models. The tool is enhanced by advanced Information Communication Technology (ICT) functionality and can operate both in stand alone, or remote mode, or be interfaced with standard Energy or Distribution Management Systems (EMS/DMS) systems. Contribution: The project provides an advanced technology for wind resource forecasting applicable in a large scale: at a single wind farm, regional or national level and for both interconnected and island systems. A major milestone is the on-line operation of the developed software by the participating utilities for onshore and offshore wind farms and the demonstration of the economic benefits. The outcome of the ANEMOS project will help consistently the increase of wind integration in two levels; in an operational level due to better management of wind farms, but also, it will contribute to increasing the installed capacity of wind farms. This is because accurate prediction of the resource reduces the risk of wind farm developers, who are then more willing to undertake new wind farm installations especially in a liberalized electricity market environment.

A Solution to the Cosmic Conundrum including Cosmological Constant and Dark Energy Problems

NASA Astrophysics Data System (ADS)

Singh, A.

2009-12-01

A comprehensive solution to the cosmic conundrum is presented that also resolves key paradoxes of quantum mechanics and relativity. A simple mathematical model, the Gravity Nullification model (GNM), is proposed that integrates the missing physics of the spontaneous relativistic conversion of mass to energy into the existing physics theories, specifically a simplified general theory of relativity. Mechanistic mathematical expressions are derived for a relativistic universe expansion, which predict both the observed linear Hubble expansion in the nearby universe and the accelerating expansion exhibited by the supernova observations. The integrated model addresses the key questions haunting physics and Big Bang cosmology. It also provides a fresh perspective on the misconceived birth and evolution of the universe, especially the creation and dissolution of matter. The proposed model eliminates singularities from existing models and the need for the incredible and unverifiable assumptions including the superluminous inflation scenario, multiple universes, multiple dimensions, Anthropic principle, and quantum gravity. GNM predicts the observed features of the universe without any explicit consideration of time as a governing parameter.

MicroRNAfold: pre-microRNA secondary structure prediction based on modified NCM model with thermodynamics-based scoring strategy.

PubMed

Han, Dianwei; Zhang, Jun; Tang, Guiliang

2012-01-01

An accurate prediction of the pre-microRNA secondary structure is important in miRNA informatics. Based on a recently proposed model, nucleotide cyclic motifs (NCM), to predict RNA secondary structure, we propose and implement a Modified NCM (MNCM) model with a physics-based scoring strategy to tackle the problem of pre-microRNA folding. Our microRNAfold is implemented using a global optimal algorithm based on the bottom-up local optimal solutions. Our experimental results show that microRNAfold outperforms the current leading prediction tools in terms of True Negative rate, False Negative rate, Specificity, and Matthews coefficient ratio.

Advancing investigation and physical modeling of first-order fire effects on soils

Treesearch

William J. Massman; John M. Frank; Sacha J. Mooney

2010-01-01

Heating soil during intense wildland fires or slash-pile burns can alter the soil irreversibly, resulting in many significant long-term biological, chemical, physical, and hydrological effects. To better understand these long-term effects, it is necessary to improve modeling capability and prediction of the more immediate, or first-order, effects that fire can have on...

Ensemble superparameterization versus stochastic parameterization: A comparison of model uncertainty representation in tropical weather prediction

NASA Astrophysics Data System (ADS)

Subramanian, Aneesh C.; Palmer, Tim N.

2017-06-01

Stochastic schemes to represent model uncertainty in the European Centre for Medium-Range Weather Forecasts (ECMWF) ensemble prediction system has helped improve its probabilistic forecast skill over the past decade by both improving its reliability and reducing the ensemble mean error. The largest uncertainties in the model arise from the model physics parameterizations. In the tropics, the parameterization of moist convection presents a major challenge for the accurate prediction of weather and climate. Superparameterization is a promising alternative strategy for including the effects of moist convection through explicit turbulent fluxes calculated from a cloud-resolving model (CRM) embedded within a global climate model (GCM). In this paper, we compare the impact of initial random perturbations in embedded CRMs, within the ECMWF ensemble prediction system, with stochastically perturbed physical tendency (SPPT) scheme as a way to represent model uncertainty in medium-range tropical weather forecasts. We especially focus on forecasts of tropical convection and dynamics during MJO events in October-November 2011. These are well-studied events for MJO dynamics as they were also heavily observed during the DYNAMO field campaign. We show that a multiscale ensemble modeling approach helps improve forecasts of certain aspects of tropical convection during the MJO events, while it also tends to deteriorate certain large-scale dynamic fields with respect to stochastically perturbed physical tendencies approach that is used operationally at ECMWF.