Dynamic laser piercing of thick section metals
NASA Astrophysics Data System (ADS)
Pocorni, Jetro; Powell, John; Frostevarg, Jan; Kaplan, Alexander F. H.
2018-01-01
Before a contour can be laser cut the laser first needs to pierce the material. The time taken to achieve piercing should be minimised to optimise productivity. One important aspect of laser piercing is the reliability of the process because industrial laser cutting machines are programmed for the minimum reliable pierce time. In this work piercing experiments were carried out in 15 mm thick stainless steel sheets, comparing a stationary laser and a laser which moves along a circular trajectory with varying processing speeds. Results show that circular piercing can decrease the pierce duration by almost half compared to stationary piercing. High speed imaging (HSI) was employed during the piercing process to understand melt behaviour inside the pierce hole. HSI videos show that circular rotation of the laser beam forces melt to eject in opposite direction of the beam movement, while in stationary piercing the melt ejects less efficiently in random directions out of the hole.
Body piercing medical concerns with cutting-edge fashion.
Koenig, L M; Carnes, M
1999-06-01
To review the current information on medical complications, psychological implications, and legislative issues related to body piercing, a largely unregulated industry in the United States. We conducted a MEDLINE search of English language articles from 1966 until May 1998 using the search terms "body piercing" and "ear piercing." Bibliographies of these references were reviewed for additional citations. We also conducted an Internet search for "body piercing" on the World Wide Web. In this manuscript, we review the available body piercing literature. We conclude that body piercing is an increasingly common practice in the United States, that this practice carries substantial risk of morbidity, and that most body piercing in the United States is being performed by unlicensed, unregulated individuals. Primary care physicians are seeing growing numbers of patients with body pierces. Practitioners must be able to recognize, treat, and counsel patients on body piercing complications and be alert to associated psychological conditions in patients who undergo body piercing.
Altered States of Consciousness during an Extreme Ritual
Loewald, Tonio; Comber, Evelyn M.; Hanson, Sarah A.; Pruitt, Bria
2016-01-01
Extreme rituals (body-piercing, fire-walking, etc.) are anecdotally associated with altered states of consciousness—subjective alterations of ordinary mental functioning (Ward, 1984)—but empirical evidence of altered states using both direct and indirect measures during extreme rituals in naturalistic settings is limited. Participants in the “Dance of Souls”, a 3.5-hour event during which participants received temporary piercings with hooks or weights attached to the piercings and danced to music provided by drummers, responded to measures of two altered states of consciousness. Participants also completed measures of positive and negative affect, salivary cortisol (a hormone associated with stress), self-reported stress, sexual arousal, and intimacy. Both pierced participants (pierced dancers) and non-pierced participants (piercers, piercing assistants, observers, drummers, and event leaders) showed evidence of altered states aligned with transient hypofrontality (Dietrich, 2003; measured with a Stroop test) and flow (Csikszentmihalyi, 1990; Csikszentmihalyi & Csikszentmihalyi, 1990; measured with the Flow State Scale). Both pierced and non-pierced participants also reported decreases in negative affect and psychological stress and increases in intimacy from before to after the ritual. Pierced and non-pierced participants showed different physiological reactions, however, with pierced participants showing increases in cortisol and non-pierced participants showing decreases from before to during the ritual. Overall, the ritual appeared to induce different physiological effects but similar psychological effects in focal ritual participants (i.e., pierced dancers) and in participants adopting other roles. PMID:27175897
ERIC Educational Resources Information Center
King, Keith A.; Vidourek, Rebecca A.
2007-01-01
Background: Health concerns of body piercing include infection, scarring, allergic reactions, pain, and disease. Current gaps in the research include students' perceived piercing risks and safe piercing practices. Purpose: The purpose of this study was to examine university students' involvement in body piercing, risk consideration and adherence…
Self-reported characteristics of women and men with intimate body piercings.
Caliendo, Carol; Armstrong, Myrna L; Roberts, Alden E
2005-03-01
The purpose of this paper is to report the findings of a study exploring factors associated with female and male intimate body piercing, with particular emphasis on health issues. Nipple and genital piercings (intimate piercings) have become common types of body art. Scant medical and nursing literature is available, leading to little understanding of these body modifications by health care providers. A convenience sample of intimately pierced individuals (63 women and 83 men) from 29 states in the United States of America was surveyed via an author-developed questionnaire. Questions focused on demographic characteristics, decision factors and health problems related to intimate piercings. Self-reported characteristics were compared between female and male participants, and participants were compared demographically to United States general population. Participants reported wearing nipple piercings (43%), genital piercings (25%) and both types (32%). Respondents were significantly younger, less ethnically diverse, better educated, less likely to be married, more often homosexual or bisexual and they initiated sexual activity at a younger age than the US population. Deliberate, individual decisions for procurement of the intimate piercings were made. Average purchase consideration was at age 25 (nipple) and 27 (genital); average age to obtain the piercing was 27 (nipple) and 28 (genital) years. Purposes for obtaining the piercings included uniqueness, self-expression and sexual expression. Most participants still liked their piercing (73-90%). Health concerns related to intimate piercings were described by both those with nipple piercings (66%) and with genital piercings (52%) and included site sensitivity, skin irritation, infection and change in urinary flow (male genital). Few STDs (3%) were reported and no HIV or hepatitis. Usually non-medical advice was sought for problems -- often from the body piercer. Understanding client rationale is not a necessary prerequisite for providing quality patient care; however, awareness of purposes and decision-making in intimate piercing can help nurses to be sensitive to client needs and plan appropriate health education.
Warshaw, Erin M; Kingsley-Loso, Jaime L; DeKoven, Joel G; Belsito, Donald V; Zug, Kathryn A; Zirwas, Matthew J; Maibach, Howard I; Taylor, James S; Sasseville, Denis; Fowler, Joseph F; Mathias, Charles Gordon Toby; DeLeo, Vincent A; Pratt, Melanie D; Marks, James G; Fransway, Anthony F
2014-01-01
This study aimed to examine the association between piercing and patch test sensitivity to metals (nickel, cobalt, and chromium) in North America. A retrospective analysis of 9334 patients tested by the North American Contact Dermatitis Group from 2007 to 2010 was conducted. Nickel sensitivity was statistically associated with at least 1 piercing (risk ratio [RR], 2.52; 95% confidence interval [CI], 2.26-2.81; P < 0.0001) and nickel sensitivity rates increased with the number of piercings (16% for 1 piercing to 32% for ≥ 5 piercings). Prevalence of nickel sensitivity was higher in females (23.2%) than in males (7.1%), but the association with piercing was stronger in males (RR, 2.38; 95% CI, 1.72-3.30; P < 0.0001) than in females (RR, 1.30; CI, 1.13-1.49; P = 0.0002). Crude analysis indicated that cobalt sensitivity was statistically associated with piercing (RR, 1.63; 95% CI, 1.40-1.91; P < 0.0001); however, stratified analysis showed that this relationship was confounded by nickel. After adjusting for nickel sensitivity, the adjusted risk ratio for piercing and cobalt was 0.78 (not significant). Chromium sensitivity was negatively associated with piercing (RR, 0.60; 95% CI, 0.48-0.75; P < 0.0001). Piercing was statistically associated with sensitivity to nickel. This relationship was dose dependent and stronger in males. Cobalt sensitivity was not associated with piercing when adjusted for nickel. Chromium sensitivity was negatively associated with piercing.
Dental and periodontal complications of lip and tongue piercing: prevalence and influencing factors.
Plessas, A; Pepelassi, E
2012-03-01
The aim of this study was to compare the prevalence of lip and tongue piercing complications and explore the effect of ornament time wear period, habits, ornament morphology and periodontal biotype on the development of complications. One hundred and ten subjects with 110 lip and 51 tongue piercings were assessed for abnormal toothwear and/or tooth chipping/cracking (dental defects), gingival recession, clinical attachment loss and probing depth of teeth adjacent to the pierced site. Piercing habits (biting, rolling, stroking, sucking) were recorded. Wear time and habits significantly affected the prevalence of dental defects and gingival recession. Pierced site significantly affected dental defects prevalence, with greater prevalence for tongue than lip piercing. Wear time significantly affected attachment loss and probing depth. Attachment loss and probing depth did not significantly differ between tongue and lip piercings. Gingival recession was significantly associated with ornament height closure and stem length of tongue ornaments. Periodontal biotype was not significantly associated with gingival recession, attachment loss and probing depth. Dental defects prevalence is greater for tongue than lip piercing. Gingival recession is similar for tongue and lip piercing. Longer wear time of tongue and lip piercing is associated with greater prevalence of dental defects and gingival recession, as well as greater attachment loss and probing depth of teeth adjacent to pierced sites. Ornament morphology affects gingival recession prevalence. © 2012 Australian Dental Association.
... is piercing performed? A single-use, sterilized piercing gun is typically used to insert an earring into ... of jewelry into the hole. The safest piercing guns are single-use guns. It means that it ...
Body piercing: complications and prevention of health risks.
Holbrook, Jaimee; Minocha, Julia; Laumann, Anne
2012-02-01
Body and earlobe piercing are common practices in the USA today. Minor complications including infection and bleeding occur frequently and, although rare, major complications have been reported. Healthcare professionals should be cognizant of the medical consequences of body piercing. Complications vary depending on the body-piercing site, materials used, experience of the practitioner, hygiene regimens, and aftercare by the recipient. Localized infections are common. Systemic infections such as viral hepatitis and toxic shock syndrome and distant infections such as endocarditis and brain abscesses have been reported. Other general complications include allergic contact dermatitis (e.g. from nickel or latex), bleeding, scarring and keloid formation, nerve damage, and interference with medical procedures such as intubation and blood/organ donation. Site-specific complications have been reported. Oral piercings may lead to difficulty speaking and eating, excessive salivation, and dental problems. Oral and nasal piercings may be aspirated or become embedded, requiring surgical removal. Piercing tracts in the ear, nipple, and navel are prone to tearing. Galactorrhea may be caused by stimulation from a nipple piercing. Genital piercings may lead to infertility secondary to infection, and obstruction of the urethra secondary to scar formation. In men, priapism and fistula formation may occur. Women who are pregnant or breastfeeding and have a piercing or are considering obtaining one need to be aware of the rare complications that may affect them or their child. Though not a 'complication' per se, many studies have reported body piercing as a marker for high-risk behavior, psychopathologic symptoms, and anti-social personality traits. When it comes to piercing complications, prevention is the key. Body piercers should take a complete medical and social history to identify conditions that may predispose an individual to complications, and candidates should choose a qualified practitioner to perform their piercing. As body piercing continues to be popular, understanding the risks of the procedures as well as the medical and psychosocial implications of wearing piercing jewelry is important for the medical practitioner.
Body piercing: medical consequences and psychological motivations.
Stirn, Aglaja
2003-04-05
Body piercing is increasing in popularity around the world. In this review, I describe the history, origins, and peculiarities of various forms of body piercing, and procedures involved, variations in healing time, legal aspects and regulations, and complications and side-effects. I have also included a discussion of the motivation for and psychological background behind body piercing. In presenting research results, I aim to raise awareness of the many risks associated with body piercing. In presenting psychological data, I intend to create an understanding of the multifaceted and often intense motivations associated with body piercing, and, thus, to diminish any prejudices held by health professionals against people with piercings.
Should Physicians Have Facial Piercings?
Newman, Alison W; Wright, Seth W; Wrenn, Keith D; Bernard, Aline
2005-01-01
OBJECTIVE The objective of this study was to assess attitudes of patrons and medical school faculty about physicians with nontraditional facial piercings. We also examined whether a piercing affected the perceived competency and trustworthiness of physicians. DESIGN Survey. SETTING Teaching hospital in the southeastern United States. PARTICIPANTS Emergency department patrons and medical school faculty physicians. INTERVENTIONS First, patrons were shown photographs of models with a nontraditional piercing and asked about the appropriateness for a physician or medical student. In the second phase, patrons blinded to the purpose of the study were shown identical photographs of physician models with or without piercings and asked about competency and trustworthiness. The third phase was an assessment of attitudes of faculty regarding piercings. MEASUREMENTS AND MAIN RESULTS Nose and lip piercings were felt to be appropriate for a physician by 24% and 22% of patrons, respectively. Perceived competency and trustworthiness of models with these types of piercings were also negatively affected. An earring in a male was felt to be appropriate by 35% of patrons, but an earring on male models did not negatively affect perceived competency or trustworthiness. Nose and eyebrow piercings were felt to be appropriate by only 7% and 5% of faculty physicians and working with a physician or student with a nose or eyebrow piercing would bother 58% and 59% of faculty, respectively. An ear piercing in a male was felt to be appropriate by 20% of faculty, and 25% stated it would bother them to work with a male physician or student with an ear piercing. CONCLUSIONS Many patrons and physicians feel that some types of nontraditional piercings are inappropriate attire for physicians, and some piercings negatively affect perceived competency and trustworthiness. Health care providers should understand that attire may affect a patient's opinion about their abilities and possibly erode confidence in them as a clinician. PMID:15836523
Body piercing with fatal consequences.
Ranga, N; Jeffery, A J
2011-01-25
Body modifications such as piercings, tattoos and surgery have increased in popularity in recent times and have become more socially acceptable. The common complications of piercing different parts of the human anatomy are well-documented, including sepsis, allergic reactions and, more rarely, endocarditis and ischaemia. Deaths related to piercing complications are primarily septic in origin. In this case, a man in his 50s died due to complications of his multiple umbilical piercings. The cause of death was unusually linked to body modification; the umbilical piercings had ultimately led to a mesenteric infarction. Cases such as these are forensically important due to potential manslaughter charges that could be brought against a piercing establishment. More importantly, this case highlights another extreme complication of body modification. Fashion statements are always changing and impact upon many lives. It is important to highlight to people the potentially life-threatening complications of common piercing practices.
Sandhu, Amonpreet; Gross, Melissa; Wylie, John; Van Caeseele, Paul; Plourde, Pierre
2007-01-01
Auricular or high helical ear piercing is an increasingly widespread fashion trend that is associated with an increased risk of potentially serious post-piercing complications such as auricular perichondritis. An 11-year-old girl developed severe auricular perichondritis following piercing of the upper helical cartilage of her ear at a hairdressing salon. Four days post piercing, she returned to the same salon for a haircut during which the pierced site was manipulated. She presented to her family physician and was treated unsuccessfully with oral cephalexin. She was then referred to an infectious diseases consultant and received antipseudomonal intravenous antibiotics with subsequent resolution. She also required debridement and removal of necrotic cartilage. Public health investigation evaluated potential sources of infection including the piercing gun, disinfectant solutions, and hair cutting spray water bottles. Final culture results of the ear helical aspirate grew Pseudomonas aeruginosa. Pseudomonas aeruginosa was also cultured from one of the water bottles used to wet her hair during the haircut. Although the pseudomonal strains from the water bottle were different than the infecting one, this contamination presents a potential source of wound infection. Damage to the helical cartilage caused by the piercing gun may also have contributed to this infection. Initial empiric antibiotic therapy for these kinds of infection must include anti-pseudomonal coverage. Auricular or high helical ear piercing using a piercing gun is not recommended.
Is chronic nipple piercing associated with hyperprolactinemia?
Sun, Grace E Ching; Pantalone, Kevin M; Gupta, Manjula; Kennedy, Laurence; Nasr, Christian; Constantiner, Marigel; Hamrahian, Amir H; Hatipoglu, Betul
2013-09-01
Literature on hyperprolactinemia in the setting of a nipple piercing is limited to individuals with concomitant breast/chest wall infection. It is unclear if chronic nipple stimulation from a piercing alone can cause sustained elevations of serum prolactin. Nipple piercing is emerging as a more mainstream societal form of body art, and the answer to this clinical question would potentially alter patient management. Our aim was to assess serum prolactin levels in subjects with nipple piercing. Inclusion criteria were as follows: men and women ≥ 18 years old with nipple piercing(s) present > 6 months. Exclusion criteria included: women who are pregnant, lactating or < 6 months postpartum; subjects on medications known to increase prolactin levels; chest wall/breast infection at the time of phlebotomy or conditions known to be associated with hyperprolactinemia. Three men and eight women were enrolled. Median (range) ages for men and women were 33 (24-42) and 27 years (23-42), respectively. All except one subject had bilateral piercings. The median interval from nipple piercing to blood draw was 4.0 (2.0-12.0) years. None of the subjects had hyperprolactinemia. Median (range) prolactin levels for men and women were 5.6 ng/mL (3.8-7.4) and 8.0 ng/mL (2.8-10.9), respectively. Our results suggest that in the absence of any concomitant infection, chronic nipple piercing is not associated with hyperprolactinemia.
Lessons from mosquitoes' painless piercing.
Gurera, Dev; Bhushan, Bharat; Kumar, Navin
2018-05-18
Arthropods are the largest group of the living organisms. They attack other organisms by biting, stinging, or piercing and sucking. Among various medically important arthropods, which feed on living hosts, mosquitoes' piercing spread viruses which have been reported to cause the highest number of deaths annually. The primary cause of the deaths is malaria, which is spread by infected mosquitoes' piercing. This study aims at elucidating lessons from mosquitoes' painless piercing. Mosquitoes pierce using their fascicle, which is a bundle of coherently functioning six stylets. Based on experiments and available literature, it is presented that mosquitoes painlessly pierce using a combination of the numbing, the fascicle's serrated design, the vibratory actuation, and the graded and frequency-dependent mechanical properties of the labrum. Based on this understanding, a mosquito-inspired microneedle design has also been proposed. Copyright © 2018 Elsevier Ltd. All rights reserved.
27 CFR 478.148 - Armor piercing ammunition intended for sporting or industrial purposes.
Code of Federal Regulations, 2014 CFR
2014-04-01
... 27 Alcohol, Tobacco Products and Firearms 3 2014-04-01 2014-04-01 false Armor piercing ammunition... AMMUNITION COMMERCE IN FIREARMS AND AMMUNITION Exemptions, Seizures, and Forfeitures § 478.148 Armor piercing ammunition intended for sporting or industrial purposes. The Director may exempt certain armor piercing...
27 CFR 478.148 - Armor piercing ammunition intended for sporting or industrial purposes.
Code of Federal Regulations, 2013 CFR
2013-04-01
... 27 Alcohol, Tobacco Products and Firearms 3 2013-04-01 2013-04-01 false Armor piercing ammunition... AMMUNITION COMMERCE IN FIREARMS AND AMMUNITION Exemptions, Seizures, and Forfeitures § 478.148 Armor piercing ammunition intended for sporting or industrial purposes. The Director may exempt certain armor piercing...
27 CFR 478.148 - Armor piercing ammunition intended for sporting or industrial purposes.
Code of Federal Regulations, 2011 CFR
2011-04-01
... 27 Alcohol, Tobacco Products and Firearms 3 2011-04-01 2010-04-01 true Armor piercing ammunition... AMMUNITION COMMERCE IN FIREARMS AND AMMUNITION Exemptions, Seizures, and Forfeitures § 478.148 Armor piercing ammunition intended for sporting or industrial purposes. The Director may exempt certain armor piercing...
27 CFR 478.148 - Armor piercing ammunition intended for sporting or industrial purposes.
Code of Federal Regulations, 2012 CFR
2012-04-01
... 27 Alcohol, Tobacco Products and Firearms 3 2012-04-01 2010-04-01 true Armor piercing ammunition... AMMUNITION COMMERCE IN FIREARMS AND AMMUNITION Exemptions, Seizures, and Forfeitures § 478.148 Armor piercing ammunition intended for sporting or industrial purposes. The Director may exempt certain armor piercing...
Federal Register 2010, 2011, 2012, 2013, 2014
2013-12-27
... sources in Pierce County, Washington. On April 16, 2012, FEMA published a proposed rulemaking at 77 FR...-2013-0002; Internal Agency Docket No. FEMA-B-7748] Proposed Flood Elevation Determinations for Pierce... proposed rule concerning proposed flood elevation determinations for Pierce County, Washington, and...
Breast abscess following nipple piercing: a case report and review of the literature.
Kapsimalakou, Smaragda; Grande-Nagel, Isabell; Simon, Martin; Fischer, Dorothea; Thill, Marc; Stöckelhuber, Beate M
2010-12-01
Nipple piercing gains popularity and social acceptance within the last years, especially among young people. The medical literature reports an increase of complications in the post-piercing period. We report a case of a young woman, who presented with a light enlargement of the right breast and tenderness in the retroareolar region following nipple piercing 5 months ago. On ultrasound, a poorly marginated hypoechoic lesion was seen which was suspicious of an inflammation. After 1 week of antibiotic therapy, the mass had enlarged. As carcinoma could not be excluded, open biopsy was performed. Histology showed signs of chronic mastitis. To date, only a few reports of breast abscess after nipple piercing have been published. With the increasing prevalence of body piercing, it is important to document and report infections which may be discovered many months following piercing. Carcinoma can mimic breast abscess and should be included in the differential diagnosis.
Federal Register 2010, 2011, 2012, 2013, 2014
2010-03-25
..., Pierce College District, 9401 Farwest Dr. SW, Lakewood, WA 98498, telephone (253) 912-3655, before April... DEPARTMENT OF THE INTERIOR National Park Service Notice of Inventory Completion: Pierce College... completion of an inventory of human remains in the control of the Pierce College District, Lakewood, WA, and...
Federal Register 2010, 2011, 2012, 2013, 2014
2011-04-28
...-AA00 Safety Zone; Pierce County Department of Emergency Management Regional Water Exercise, East... the Regional Water Rescue Exercise. Basis and Purpose The Pierce County, Washington, Department of... to read as follows: Sec. 165.T13-0251 Safety Zone; Pierce County Department of Emergency Management...
Federal Register 2010, 2011, 2012, 2013, 2014
2012-09-04
... Fine Particulate Standard for the Tacoma, Pierce County Nonattainment Area AGENCY: Environmental..., Pierce County nonattainment area (hereafter referred to as ``Tacoma, Pierce County'' or ``the area'') has... the Tacoma, Pierce County nonattainment area has clean data for the 2006 24-hour PM 2.5 NAAQS. This...
Federal Register 2010, 2011, 2012, 2013, 2014
2012-07-05
... Fine Particulate Standard for the Tacoma, Pierce County Nonattainment Area AGENCY: Environmental..., Pierce County nonattainment area (hereafter referred to as ``Tacoma, Pierce County'' or ``the area'') for... section 107(d)(1), for the 2006 24-hour PM 2.5 NAAQS. As part of that action, Tacoma, Pierce County...
Hellard, Margaret; Aitken, Campbell; Mackintosh, Andrew; Ridge, Allison; Bowden, Scott
2003-06-01
Body piercing has become increasingly popular, leading to concerns about the associated risk of hepatitis C virus (HCV) transmission during piercing. Many body-piercing practitioners (BPPs) have recently entered the industry but little is known about their training and understanding of HCV transmission. This study measured BPP knowledge about HCV and infection control procedures. It also tested for HCV contamination within body-piercing establishments. BPPs completed a questionnaire about the number and type of piercings performed, their methods for disposing of and reprocessing piercing equipment, and their training and knowledge of HCV. Environmental swabs were collected and tested for HCV RNA. BPPs at 35 establishments were recruited. A total of 31 BPPs had training as a BPP, ranging from 1 hour to 6 years (median: 15 days). Reprocessing of equipment was variable; 8 establishments inadequately reprocessed piercing guns and 4 inadequately reprocessed forceps or guiding equipment. All BPPs were aware of HCV but many did not know how the virus was transmitted. A total of 19 BPPs performed extra cleaning after piercing a customer known to be HCV positive. No environmental swabs tested were positive for HCV RNA. This study showed that many BPPs had inadequate training, and lacked knowledge and understanding of HCV transmission, infection control, and universal precautions. To reduce the risk of HCV transmission, BPPs should be required to undergo formal training in infection control before being registered as BPPs.
Code of Federal Regulations, 2010 CFR
2010-07-01
... HEALTH SAFETY AND HEALTH STANDARDS-SURFACE METAL AND NONMETAL MINES Drilling and Rotary Jet Piercing Rotary Jet Piercing § 56.7804 Refueling. When rotary jet piercing equipment requires refueling at...
Code of Federal Regulations, 2011 CFR
2011-07-01
... HEALTH SAFETY AND HEALTH STANDARDS-SURFACE METAL AND NONMETAL MINES Drilling and Rotary Jet Piercing Rotary Jet Piercing § 56.7804 Refueling. When rotary jet piercing equipment requires refueling at...
Code of Federal Regulations, 2010 CFR
2010-07-01
... HEALTH SAFETY AND HEALTH STANDARDS-UNDERGROUND METAL AND NONMETAL MINES Drilling and Rotary Jet Piercing Rotary Jet Piercing-Surface Only § 57.7804 Refueling. When rotary jet piercing equipment requires...
Code of Federal Regulations, 2011 CFR
2011-07-01
... HEALTH SAFETY AND HEALTH STANDARDS-UNDERGROUND METAL AND NONMETAL MINES Drilling and Rotary Jet Piercing Rotary Jet Piercing-Surface Only § 57.7804 Refueling. When rotary jet piercing equipment requires...
An Integrated Finite Element-based Simulation Framework: From Hole Piercing to Hole Expansion
DOE Office of Scientific and Technical Information (OSTI.GOV)
Hu, Xiaohua; Sun, Xin; Golovashchenko, Segey F.
An integrated finite element-based modeling framework is developed to predict the hole expansion ratio (HER) of AA6111-T4 sheet by considering the piercing-induced damages around the hole edge. Using damage models and parameters calibrated from previously reported tensile stretchability studies, the predicted HER correlates well with experimentally measured HER values for different hole piercing clearances. The hole piercing model shows burrs are not generated on the sheared surface for clearances less than 20%, which corresponds well with the experimental data on pierced holes cross-sections. Finite-element-calculated HER also is not especially sensitive to piercing clearances less than this value. However, as clearancesmore » increase to 30% and further to 40%, the HER values are predicted to be considerably smaller, also consistent with experimental measurements. Upon validation, the integrated modeling framework is used to examine the effects of different hole piercing and hole expansion conditions on the critical HERs for AA6111-T4.« less
Diode Laser Ear Piercing: A Novel Technique.
Suseela, Bibilash Babu; Babu, Preethitha; Chittoria, Ravi Kumar; Mohapatra, Devi Prasad
2016-01-01
Earlobe piercing is a common office room procedure done by a plastic surgeon. Various methods of ear piercing have been described. In this article, we describe a novel method of laser ear piercing using the diode laser. An 18-year-old female patient underwent an ear piercing using a diode laser with a power of 2.0 W in continuous mode after topical local anaesthetic and pre-cooling. The diode laser was fast, safe, easy to use and highly effective way of ear piercing. The advantages we noticed while using the diode laser over conventional methods were more precision, minimal trauma with less chances of hypertrophy and keloids, no bleeding with coagulation effect of laser, less time taken compared to conventional method and less chance of infection due to thermal heat effect of laser.
2014-01-01
Background A system providing disabled persons with control of various assistive devices with the tongue has been developed at Aalborg University in Denmark. The system requires an activation unit attached to the tongue with a small piercing. The aim of this study was to establish and evaluate a safe and tolerable procedure for medical tongue piercing and to evaluate the expected and perceived procedural discomfort. Methods Four tetraplegic subjects volunteered for the study. A surgical protocol for a safe insertion of a tongue barbell piercing was presented using sterilized instruments and piercing parts. Moreover, post-procedural observations of participant complications such as bleeding, edema, and infection were recorded. Finally, procedural discomforts were monitored by VAS scores of pain, changes in taste and speech as well as problems related to hitting the teeth. Results The piercings were all successfully inserted in less than 5 min and the pain level was moderate compared with oral injections. No bleeding, infection, embedding of the piercing, or tooth/gingival injuries were encountered; a moderate edema was found in one case without affecting the speech. In two cases the piercing rod later had to be replaced by a shorter rod, because participants complained that the rod hit their teeth. The replacements prevented further problems. Moreover, loosening of balls was encountered, which could be prevented with the addition of dental glue. No cases of swallowing or aspiration of the piercing parts were recorded. Conclusions The procedure proved simple, fast, and safe for insertion of tongue piercings for tetraplegic subjects in a clinical setting. The procedure represented several precautions in order to avoid risks in these susceptible participants with possible co-morbidity. No serious complications were encountered, and the procedure was found tolerable to the participants. The procedure may be used in future studies with tongue piercings being a prerequisite for similar systems, and this may include insertion in an out-patient setting. PMID:24684776
30 CFR 56.7806 - Oxygen intake coupling.
Code of Federal Regulations, 2010 CFR
2010-07-01
... SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-SURFACE METAL AND NONMETAL MINES Drilling and Rotary Jet Piercing Rotary Jet Piercing § 56.7806 Oxygen intake coupling. The oxygen intake coupling on jet-piercing...
30 CFR 56.7806 - Oxygen intake coupling.
Code of Federal Regulations, 2011 CFR
2011-07-01
... SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-SURFACE METAL AND NONMETAL MINES Drilling and Rotary Jet Piercing Rotary Jet Piercing § 56.7806 Oxygen intake coupling. The oxygen intake coupling on jet-piercing...
Junco, Pilar; Barrios, Rocío; Ruiz, María José; Bravo, Manuel
2017-10-01
Oral piercing can lead to complications and dentists are in a unique position to detect such complications. The purpose of this study was: (i) to assess the immediate and the long-term effects, on dental students, of a training programme about oral piercing knowledge; and (ii) to assess the immediate effect, on adolescents, of a single educational intervention session about oral piercing. A training programme for dental students (n = 66) was carried out in three phases. The last phase consisted of preparing and giving talks about oral piercing at schools, which was delivered by a random selection of dental students involved in the training programme. Dental students answered a questionnaire about oral piercing knowledge, before, immediately after (only the dental students included in the last phase) and 12 months after the training programme. Adolescents (n = 347) answered a survey about oral piercing knowledge before and after the talks. There were statistically significant differences in all comparison groups, except for the results in the 'before intervention' and in the '12 months after intervention' groups among dental students who had not prepared and given the talks to adolescents. Knowledge about oral piercing significantly improved among adolescents when comparing results before (mean questionnaire score = 3.0) and after (mean questionnaire score = 6.2) the talks. Oral piercing educational intervention had a favourable impact on adolescents and dental students, particularly among those who were more involved in the learning process. © 2017 FDI World Dental Federation.
30 CFR 57.7806 - Oxygen intake coupling.
Code of Federal Regulations, 2010 CFR
2010-07-01
... Jet Piercing Rotary Jet Piercing-Surface Only § 57.7806 Oxygen intake coupling. The oxygen intake coupling on jet piercing drills shall be constructed so that only the oxygen hose can be coupled to it. ...
30 CFR 57.7806 - Oxygen intake coupling.
Code of Federal Regulations, 2011 CFR
2011-07-01
... Jet Piercing Rotary Jet Piercing-Surface Only § 57.7806 Oxygen intake coupling. The oxygen intake coupling on jet piercing drills shall be constructed so that only the oxygen hose can be coupled to it. ...
Piercings and tattoos are body decorations that go back to ancient times. Body piercing involves making a hole in the skin so that you can ... but can be in other parts of the body. Tattoos are designs on the skin made with ...
Evaluation of Fracture Initiation in the Mannesmann Piercing Process
NASA Astrophysics Data System (ADS)
Fanini, S.; Ghiotti, A.; Bruschi, S.
2007-04-01
One of the challenging objectives in studying the Mannesmann piercing process is to predict the fracture initiation, known as "Mannesmann effect", in order to design and optimize the working parameters of the piercing process. The objective of the paper is to investigate the workability of a tube steel tested in the same conditions of the Mannesman piercing process. The stress and strain states as well as temperature fields arising during the process are identified through numerical simulations. The hot tensile test is chosen for fundamental studies on fracture initiation, as a tensile state of stress in the centre of the billet in the first stages of the piercing process before the plug arrival seems to be one of the main causes of the crack initiation. The material constants of energy-based models implemented in FEM codes are calculated and numerical results are compared with non-plug piercing tests carried out on the industrial plant.
Code of Federal Regulations, 2014 CFR
2014-07-01
... County X Pepin County X Pierce County X Polk County X St. Croix County X Trempealeau County X Vernon... Unclassifiable/Attainment Ozaukee County Unclassifiable/Attainment Pepin County Unclassifiable/Attainment Pierce... Unclassifiable/Attainment Pepin County Unclassifiable/Attainment Pierce County Unclassifiable/Attainment Polk...
The ins and outs of body piercing.
Larkin, Brenda G
2004-02-01
PATIENTS WITH BODY PIERCINGS present a challenge for today's perioperative nurses. The need to prepare these patients for surgery while promoting safety, preserving body image, and respecting cultural values has gone beyond the routine practice of jewelry removal. BODY ART (ie, tattooing, piercing) has been practiced by men, women, and children from ancient times to the present. It was used then, as it is now, for many purposes, including personal expression, rite of passage, and fashion trends. THE EXPANDING POPULARITY of body piercing increases the likelihood that patients will arrive for surgery with body jewelry in place. This article provides perioperative nurses with the proper tools to deliver culturally sensitive care to patients with body piercings.
Breast abscess after nipple piercing: sonographic findings with clinical correlation.
Leibman, A Jill; Misra, Monika; Castaldi, Maria
2011-09-01
The purpose of this series was to review the spectrum of clinical and sonographic features associated with infection after nipple piercing. Between 2002 and 2010, 6 patients presented to our breast center with a breast abscess after nipple piercing. A retrospective analysis of the imaging findings was performed with clinical and pathologic correlation. Patients with breast infections after nipple piercing tend to be young, and the timing since piercing varies from 2 weeks to 17 months. Sonography showed a complex or hypoechoic mass in 5 of 6 patients. Treatment of breast abscesses included surgical incision and drainage, percutaneous drainage, and antibiotic therapy. Surgical evacuation is commonly performed; however, sonographically guided aspiration may be an appropriate management strategy.
Cegolon, Luca; Mastrangelo, Giuseppe; Mazzoleni, Francesco; Majori, Silvia; Baldovin, Tatjana; Xodo, Carla
2010-04-01
This study's purpose was to investigate, in a large cohort of adolescents, the prevalence and association of personal and family characteristics with having or considering body piercing or tattoo. We surveyed students from the Veneto Region of northeast Italy with a self-administered questionnaire that asked about body piercing and tattoo and about personal and family characteristics. Multinomial weighted regression analysis was used to generate adjusted relative risk ratios with 95% confidence interval (CI) for piercing and tattooing separately. A total of 4,277 of 4,524 surveyed students completed and returned a usable questionnaire. For piercing, the prevalence was 20%. Girls, students with a less educated father, and those dissatisfied with their physical appearance were more likely to be interested in and to have undergone this procedure. For tattooing, the prevalence was 6%. Boys and students whose father was younger than 48 were more likely to have experienced tattooing. A strong association was found between having a piercing and having a tattoo. Fify-six percent of pierced students and 48% of tattooed students were underage (<18 years). We found that male gender (for tattoo), female gender (for piercing), dissatisfaction with physical appearance, positive attitudes toward either piercing or tattoo, and having a younger and less educated father were associated with having or desiring body modification. These factors could be considered for targeted patient education.
Bengualid, Victoria; Singh, Veera; Singh, Herpreet; Berger, Judith
2008-05-01
Body piercing has become increasingly prevalent. We describe a case of breast infection with combined mycobacteria and anaerobe following nipple piercing, and review the literature. A 17-year-old female developed a breast abscess 4 months after nipple piercing. Cultures grew Prevotalla melangenica and Mycobacterium fortuitum. She required drainage and antibiotic treatment. Three months into her treatment she stopped her medications, relapsed, and required drainage. Two months later, on antimycobacteria therapy, her wound is healing. Review of the infectious complications of nipple piercing yielded 12 cases, 5 of which had a foreign body. The pathogens isolated (coagulase negative staphylococcus, mycobacteria, streptococcus, anaerobe, and gordonia) are not the usual organisms to be isolated from a breast abscess. This could result from reporting bias or the presence of a foreign body, the nipple ring. The three cases of mycobacteria, in addition to ours, are reviewed. The average age is 22 years. Three to 9 months elapsed between piercing and infection. All cases required drainage. Antimycobacteria therapy was used in three of the four cases for 10 days to 6 months. With the increasing prevalence of body piercing, it is important to document and report infections. We describe a breast abscess following nipple piercing with combined anaerobic and a mycobacterial pathogens. This underscores the need for obtaining cultures including anaerobes and mycobacteria.
NASA Astrophysics Data System (ADS)
Brown, Nicholas W. A.
Composite parts can be manufactured to near-net shape with minimum wastage of material; however, there is almost always a need for further machining. The most common post-manufacture machining operations for composite materials are to create holes for assembly. This thesis presents and discusses a thermally-assisted piercing process that can be used as a technique for introducing holes into thermoplastic composites. The thermally-assisted piercing process heats up, and locally melts, thermoplastic composites to allow material to be displaced around a hole, rather than cutting them out from the structure. This investigation was concerned with how the variation of piercing process parameters (such as the size of the heated area, the temperature of the laminate prior to piercing and the geometry of the piercing spike) changed the material microstructure within carbon fibre/Polyetheretherketone (PEEK) laminates. The variation of process parameters was found to significantly affect the formation of resin rich regions, voids and the fibre volume fraction in the material surrounding the hole. Mechanical testing (using open-hole tension, open-hole compression, plain-pin bearing and bolted bearing tests) showed that the microstructural features created during piercing were having significant influence over the resulting mechanical performance of specimens. By optimising the process parameters strength improvements of up to 11% and 21% were found for pierced specimens when compared with drilled specimens for open-hole tension and compression loading, respectively. For plain-pin and bolted bearing tests, maximum strengths of 77% and 85%, respectively, were achieved when compared with drilled holes. Improvements in first failure force (by 10%) and the stress at 4% hole elongation (by 18%), however, were measured for the bolted bearing tests when compared to drilled specimens. The overall performance of pierced specimens in an industrially relevant application ultimately depends on the properties required for that specific scenario. The results within this thesis show that the piercing technique could be used as a direct replacement to drilling depending on this application.
Ohashi, Manabu; Hiki, Naoki; Ida, Satoshi; Kumagai, Koshi; Nunobe, Souya; Sano, Takeshi
2018-05-21
Delta-shaped anastomosis is usually applied for an intracorporeal gastrogastrostomy in totally laparoscopic pylorus-preserving gastrectomy (TLPPG). However, the remnant stomach is slightly twisted around the anastomosis because it connects in side-to-side fashion. To realize an intracorporeal end-to-end gastrogastrostomy using an endoscopic linear stapler, we invented a novel method including a unique anastomotic technique. In this new approach, we first made small gastrotomies at the greater and lesser curvatures of the transected antrum and then pierced it using an endoscopic linear stapler. After the pierced antrum and the proximal remnant stomach were mechanically connected, the gastrotomies and stapling lines were transected using an endoscopic linear stapler, creating an intracorporeal end-to-end gastrogastrostomy. We have named this technique the "piercing method" because piercing the stomach is essential to its implementation. Between October 2015 and June 2017, 26 patients who had clinically early gastric cancer at the middle third of the stomach without clinical evidence of lymph node metastasis underwent TLPPG involving the novel method. The 26 patients successfully underwent an intracorporeal mechanical end-to-end gastrogastrostomy by the piercing method. The median operation time of the 26 patients was 272 min (range 209-357 min). With the exception of one gastric stasis, no problems associated with the piercing method were encountered during and after surgery. The piercing method can safely create an intracorporeal mechanical end-to-end gastrogastrostomy in TLPPG. Piercing the stomach using an endoscopic linear stapler is a new technique for gastrointestinal anastomosis. This method should be considered if the surgical aim is creation of an intracorporeal end-to-end gastrogastrostomy in TLPPG.
Tongue piercing and insertion of metal studs: three cases of dental and oral consequences.
Ram, D; Peretz, B
2000-01-01
"Body art" is a fashion that appears to be gaining popularity worldwide. There are many risks and potentially adverse results associated with tongue piercing. Pain (the procedure is performed without anesthetics), post-placement edema and the risk of prolonged bleeding, if the blood vessels are punctured during the piercing, and fracture of tooth structures, are but a few of the risks. The purpose of the present article is to describe the consequences of three cases of tongue piercing in which metallic barbell-shaped studs were inserted: the consequences include the fracture of tooth structure, caused by the device knocking against the teeth; and inflammation and edema occurred as a result of the piercing of the tongue.
[Association between tattoos, piercings and risk behaviors in adolescents].
Cossio, María Laura T; Giesen, Laura F; Araya, Gabriela; Pérez-Cotapos, María Luisa S
2012-02-01
The use of tattoos and piercings has increased, especially among adolescents in the last decades. To evaluate the prevalence of these behaviors in adolescents and their association with risk behaviors such as alcohol, tobacco and illicit drug use and sexual promiscuity. An anonymous and confidential survey about tattooing and piercings was applied to randomly selected high school teenagers, attending municipal, private-subsidized and private schools, in four sectors of Santiago (north-east, south-east, north-west, south-west). The surveys were answered by 1329 participants with a mean age of 15 years (62% women) from 9 schools in Santiago. The prevalence of tattoos was 1.7% (confidence intervals (CI) 1.1% to 2.5%). The figure for piercings was 30.6% (CI 28.2 to 33.1%). A higher prevalence of tattooing and piercings was observed in groups with a history of psychiatric disorders, criminal records, alcohol, tobacco and illicit drug consumption and initiation of sexual activity (p < 0,001). This study confirms that tattoos and piercings are indicators of adolescent risk behaviors.
75 FR 71139 - Land Acquisitions; Puyallup Tribe of Washington
Federal Register 2010, 2011, 2012, 2013, 2014
2010-11-22
... Auditor, in Pierce County, Washington. Except that portion of Lot 3 conveyed to the State of Washington by Deeds recorded under Auditor's file number 689865 and 689858. Together with the East half of the... amendment of Short Plat Nos. 8502210395 and 8403080186, filed with the Pierce County Auditor, in Pierce...
Tattoos and Piercings: Attitudes, Behaviors, and Interpretations of College Students
ERIC Educational Resources Information Center
Horne, Jenn; Knox, David; Zusman, Jane; Zusman, Marty E.
2007-01-01
Previously, in those segments of America where "proper" behavior was valued, tattoos and body piercings were examples of what Goffman identified as "stigma"--they spoiled one's identity. Today, tattoos and piercings have become more mainstream. This study reports the survey of 400 undergraduates at a large southeastern university. Regarding…
Code of Federal Regulations, 2014 CFR
2014-07-01
... 30 Mineral Resources 1 2014-07-01 2014-07-01 false Jet drills. 57.7801 Section 57.7801 Mineral... HEALTH SAFETY AND HEALTH STANDARDS-UNDERGROUND METAL AND NONMETAL MINES Drilling and Rotary Jet Piercing Rotary Jet Piercing-Surface Only § 57.7801 Jet drills. Jet piercing drills shall be provided with: (a) A...
Code of Federal Regulations, 2013 CFR
2013-07-01
... 30 Mineral Resources 1 2013-07-01 2013-07-01 false Jet drills. 56.7801 Section 56.7801 Mineral... HEALTH SAFETY AND HEALTH STANDARDS-SURFACE METAL AND NONMETAL MINES Drilling and Rotary Jet Piercing Rotary Jet Piercing § 56.7801 Jet drills. Jet piercing drills shall be provided with— (a) A system to...
Code of Federal Regulations, 2012 CFR
2012-07-01
... 30 Mineral Resources 1 2012-07-01 2012-07-01 false Jet drills. 56.7801 Section 56.7801 Mineral... HEALTH SAFETY AND HEALTH STANDARDS-SURFACE METAL AND NONMETAL MINES Drilling and Rotary Jet Piercing Rotary Jet Piercing § 56.7801 Jet drills. Jet piercing drills shall be provided with— (a) A system to...
Code of Federal Regulations, 2012 CFR
2012-07-01
... 30 Mineral Resources 1 2012-07-01 2012-07-01 false Jet drills. 57.7801 Section 57.7801 Mineral... HEALTH SAFETY AND HEALTH STANDARDS-UNDERGROUND METAL AND NONMETAL MINES Drilling and Rotary Jet Piercing Rotary Jet Piercing-Surface Only § 57.7801 Jet drills. Jet piercing drills shall be provided with: (a) A...
Code of Federal Regulations, 2013 CFR
2013-07-01
... 30 Mineral Resources 1 2013-07-01 2013-07-01 false Jet drills. 57.7801 Section 57.7801 Mineral... HEALTH SAFETY AND HEALTH STANDARDS-UNDERGROUND METAL AND NONMETAL MINES Drilling and Rotary Jet Piercing Rotary Jet Piercing-Surface Only § 57.7801 Jet drills. Jet piercing drills shall be provided with: (a) A...
Code of Federal Regulations, 2014 CFR
2014-07-01
... 30 Mineral Resources 1 2014-07-01 2014-07-01 false Jet drills. 56.7801 Section 56.7801 Mineral... HEALTH SAFETY AND HEALTH STANDARDS-SURFACE METAL AND NONMETAL MINES Drilling and Rotary Jet Piercing Rotary Jet Piercing § 56.7801 Jet drills. Jet piercing drills shall be provided with— (a) A system to...
Code of Federal Regulations, 2010 CFR
2010-07-01
... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Jet drills. 57.7801 Section 57.7801 Mineral... HEALTH SAFETY AND HEALTH STANDARDS-UNDERGROUND METAL AND NONMETAL MINES Drilling and Rotary Jet Piercing Rotary Jet Piercing-Surface Only § 57.7801 Jet drills. Jet piercing drills shall be provided with: (a) A...
Code of Federal Regulations, 2010 CFR
2010-07-01
... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Jet drills. 56.7801 Section 56.7801 Mineral... HEALTH SAFETY AND HEALTH STANDARDS-SURFACE METAL AND NONMETAL MINES Drilling and Rotary Jet Piercing Rotary Jet Piercing § 56.7801 Jet drills. Jet piercing drills shall be provided with— (a) A system to...
Code of Federal Regulations, 2011 CFR
2011-07-01
... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Jet drills. 57.7801 Section 57.7801 Mineral... HEALTH SAFETY AND HEALTH STANDARDS-UNDERGROUND METAL AND NONMETAL MINES Drilling and Rotary Jet Piercing Rotary Jet Piercing-Surface Only § 57.7801 Jet drills. Jet piercing drills shall be provided with: (a) A...
Code of Federal Regulations, 2011 CFR
2011-07-01
... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Jet drills. 56.7801 Section 56.7801 Mineral... HEALTH SAFETY AND HEALTH STANDARDS-SURFACE METAL AND NONMETAL MINES Drilling and Rotary Jet Piercing Rotary Jet Piercing § 56.7801 Jet drills. Jet piercing drills shall be provided with— (a) A system to...
30 CFR 56.7806 - Oxygen intake coupling.
Code of Federal Regulations, 2013 CFR
2013-07-01
... 30 Mineral Resources 1 2013-07-01 2013-07-01 false Oxygen intake coupling. 56.7806 Section 56.7806... Piercing Rotary Jet Piercing § 56.7806 Oxygen intake coupling. The oxygen intake coupling on jet-piercing drills shall be constructed so that only the oxygen hose can be coupled to it. ...
30 CFR 56.7806 - Oxygen intake coupling.
Code of Federal Regulations, 2012 CFR
2012-07-01
... 30 Mineral Resources 1 2012-07-01 2012-07-01 false Oxygen intake coupling. 56.7806 Section 56.7806... Piercing Rotary Jet Piercing § 56.7806 Oxygen intake coupling. The oxygen intake coupling on jet-piercing drills shall be constructed so that only the oxygen hose can be coupled to it. ...
30 CFR 56.7806 - Oxygen intake coupling.
Code of Federal Regulations, 2014 CFR
2014-07-01
... 30 Mineral Resources 1 2014-07-01 2014-07-01 false Oxygen intake coupling. 56.7806 Section 56.7806... Piercing Rotary Jet Piercing § 56.7806 Oxygen intake coupling. The oxygen intake coupling on jet-piercing drills shall be constructed so that only the oxygen hose can be coupled to it. ...
PIERCE1 is critical for specification of left-right asymmetry in mice.
Sung, Young Hoon; Baek, In-Jeoung; Kim, Yong Hwan; Gho, Yong Song; Oh, S Paul; Lee, Young Jae; Lee, Han-Woong
2016-06-16
The specification of left-right asymmetry of the visceral organs is precisely regulated. The earliest breakage of left-right symmetry occurs as the result of leftward flow generated by asymmetric beating of nodal cilia, which eventually induces asymmetric Nodal/Lefty/Pitx2 expression on the left side of the lateral plate mesoderm. PIERCE1 has been identified as a p53 target gene involved in the DNA damage response. In this study, we found that Pierce1-null mice exhibit severe laterality defects, including situs inversus totalis and heterotaxy with randomized situs and left and right isomerisms. The spectrum of laterality defects was closely correlated with randomized expression of Nodal and its downstream genes, Lefty1/2 and Pitx2. The phenotype of Pierce1-null mice most closely resembled that of mutant mice with impaired ciliogenesis and/or ciliary motility of the node. We also found the loss of asymmetric expression of Cerl2, the earliest flow-responding gene in the node of Pierce1-null embryos. The results suggest that Pierce1-null embryos have defects in generating a symmetry breaking signal including leftward nodal flow. This is the first report implicating a role for PIERCE1 in the symmetry-breaking step of left-right asymmetry specification.
Jacobs, V R; Golombeck, K; Jonat, W; Kiechle, M
2002-07-01
Piercing is a growing fashion trend among young people. Nipple piercing has shown an increase over the last years. We report about three coincidental cases of breast abscess after nipple piercing within the last months in our clinics and discuss the related problems for health and society. Retrospective analysis of three case reports regarding course of illness and reasons as well as review of literature and internet. Three patients average age 31.9 (28-35) years were hospitalized with breast abscess after nipple piercing (2 x left, 1 x right). The distance piercing to infection was on average 7.7 (5-12) months. In all patients the abscess was incised and the abscess cavity removed, two had an irrigation tubing for a three days, all received i. v. antibiotics postoperatively. Evidence for bacteria was found in case 1: PCR-confirmation of atypical mycobacteria and coagulase negative staphylococcus, case 2: coagulase negative staphylococcus and group B-streptococcus and case 3: green and microaerophilic staphylococcus. The length of hospital stay was on average 8.0 (6-9) days/case, the hospital costs were 3 624,54 e (3 000,26-4 310,58 e) euro;/case. In a follow-up period of 10,0 (5-15) months one relapse occurred which had to be re-operated. Nipple piercing has grown in popularity within the last years and is in general not a stigma of a subculture or lower social classes any more. However, the risk for breast infection is on the one hand underestimated by the women and on the other hand played down by piercing studios. Breast infection after nipple piercing is rarely documented in scientific literature and data bases. Only seven case reports are scientifically published so far. Healing of the wound channel varies and can take up to 6-12 months. The risk for infection is approximately 10-20 %, often in a interval of months after the procedure. Insufficient understanding as well as inconsequent performance of hygienic preparation of the wound beneath other risk factors like nicotine abuse, wrongs size of jewelry, post breast enlargement with prosthesis etc. increase the risk of breast infection after nipple piercing. Due to obvious under documentation this is the largest series of breast infection after nipple piercing in the world.
Hong, Bo-Kyung; Lee, Hyo Young
2017-01-01
Background: In recent years, increasing numbers of adults and adolescents have opted to undergo tattoo and piercing procedures. Studies among adolescents with tattoo and piercing have usually explored the relationship between one factor and the decision to have tattoos and/or piercings. The aim of this study was to determine relationships between body cosmetic procedures and selfesteem, propensity for sensation seeking, and risk behaviours among adults. Materials and Methods: The subjects were divided into two groups, i.e., those with (n=429) and those without tattoos/piercings (n=237), and self-esteem, propensity for sensation seeking, and risk behaviour were compared between the two groups using self-report questionnaires. To analyse differences in self-esteem and the propensity for sensation seeking, general characteristics were statistically adjusted. In addition, general characteristics, self-esteem, and propensity for sensation seeking were statistically adjusted to determine differences in the propensity for risk behaviour between the two groups. Results: Significant differences were observed in age, marital status, income level, occupation, values or sensitivity to fashion, and educational level between the group with and that without tattoos/ piercings. There was no significant difference in self-esteem, whereas there were significant differences in the propensity for sensation seeking and risk behaviour between the two groups. Conclusions: Continuous attention to, and interest in, the increased incidence of tattooing and piercing are necessary, especially in terms of public interventions for health education and health promotion, as these forms of self-adornment are associated with behaviours that pose a risk to health. Significance for public health The age range and occupations of people who undergo tattoo procedures have diversified with their increasing popularity as cosmetic procedures. This study investigated general characteristics of adults with tattoos and piercings and determined relationships between these body cosmetic procedures and self-esteem, sensation seeking, and risk behaviour. This study provides useful information as to whether adults with tattoos and piercings might be appropriate target groups for public health education, and further identifies factors associated with adults who choose to have tattoos and piercings. PMID:29291195
Code of Federal Regulations, 2011 CFR
2011-04-01
... 27 Alcohol, Tobacco Products and Firearms 3 2011-04-01 2010-04-01 true Armor piercing ammunition... FIREARMS AND AMMUNITION COMMERCE IN FIREARMS AND AMMUNITION Exemptions, Seizures, and Forfeitures § 478.149 Armor piercing ammunition manufactured or imported for the purpose of testing or experimentation. The...
Code of Federal Regulations, 2010 CFR
2010-04-01
... 27 Alcohol, Tobacco Products and Firearms 3 2010-04-01 2010-04-01 false Armor piercing ammunition... FIREARMS AND AMMUNITION COMMERCE IN FIREARMS AND AMMUNITION Exemptions, Seizures, and Forfeitures § 478.149 Armor piercing ammunition manufactured or imported for the purpose of testing or experimentation. The...
Code of Federal Regulations, 2012 CFR
2012-04-01
... 27 Alcohol, Tobacco Products and Firearms 3 2012-04-01 2010-04-01 true Armor piercing ammunition... FIREARMS AND AMMUNITION COMMERCE IN FIREARMS AND AMMUNITION Exemptions, Seizures, and Forfeitures § 478.149 Armor piercing ammunition manufactured or imported for the purpose of testing or experimentation. The...
Code of Federal Regulations, 2014 CFR
2014-04-01
... 27 Alcohol, Tobacco Products and Firearms 3 2014-04-01 2014-04-01 false Armor piercing ammunition... FIREARMS AND AMMUNITION COMMERCE IN FIREARMS AND AMMUNITION Exemptions, Seizures, and Forfeitures § 478.149 Armor piercing ammunition manufactured or imported for the purpose of testing or experimentation. The...
Code of Federal Regulations, 2013 CFR
2013-04-01
... 27 Alcohol, Tobacco Products and Firearms 3 2013-04-01 2013-04-01 false Armor piercing ammunition... FIREARMS AND AMMUNITION COMMERCE IN FIREARMS AND AMMUNITION Exemptions, Seizures, and Forfeitures § 478.149 Armor piercing ammunition manufactured or imported for the purpose of testing or experimentation. The...
30 CFR 57.7806 - Oxygen intake coupling.
Code of Federal Regulations, 2014 CFR
2014-07-01
... 30 Mineral Resources 1 2014-07-01 2014-07-01 false Oxygen intake coupling. 57.7806 Section 57.7806... Jet Piercing Rotary Jet Piercing-Surface Only § 57.7806 Oxygen intake coupling. The oxygen intake coupling on jet piercing drills shall be constructed so that only the oxygen hose can be coupled to it. ...
30 CFR 57.7806 - Oxygen intake coupling.
Code of Federal Regulations, 2013 CFR
2013-07-01
... 30 Mineral Resources 1 2013-07-01 2013-07-01 false Oxygen intake coupling. 57.7806 Section 57.7806... Jet Piercing Rotary Jet Piercing-Surface Only § 57.7806 Oxygen intake coupling. The oxygen intake coupling on jet piercing drills shall be constructed so that only the oxygen hose can be coupled to it. ...
30 CFR 57.7806 - Oxygen intake coupling.
Code of Federal Regulations, 2012 CFR
2012-07-01
... 30 Mineral Resources 1 2012-07-01 2012-07-01 false Oxygen intake coupling. 57.7806 Section 57.7806... Jet Piercing Rotary Jet Piercing-Surface Only § 57.7806 Oxygen intake coupling. The oxygen intake coupling on jet piercing drills shall be constructed so that only the oxygen hose can be coupled to it. ...
Smithsonian Marine Station (SMS) at Fort Pierce
Research Online Resources Get Involved Events Calendar NMNH Home Florida with star for Ft. Pierce RESEARCH Smithsonian Marine Station (SMS) at Fort Pierce, Florida is a research center specializing in marine biodiversity and ecosystems of Florida. Research focuses on the Indian River Lagoon and the offshore waters of
ERIC Educational Resources Information Center
Aizenman, Marta; Jensen, Mary Ann Conover
2007-01-01
Self-injurious behaviors were compared with tattooing and piercing in a college population. Findings indicate a high prevalence of self-injury. Students who self-injured were motivated by a desire to alleviate emotional pain; students who tattooed and pierced by self-expression. Students who self-injured scored higher than students who tattooed…
About Us: Smithsonian Marine Station (SMS) at Fort Pierce
Smithsonian Marine Station at Fort Pierce Website Search Box Search Field: SMS Website Search [PDF] SMS Home ⺠About Us About Us Mission Statement The overall mission of the Smithsonian Marine Station at Fort Pierce is support and conduct of scholarly research in the marine sciences, including
1988-05-01
OF EXTRUSION HLSGFLN XRSO ICO-F XTUINPPER PATE CUT-OFF EXTRUSION I I 7 TUMBLE S TUMBLE HEAT &SORT TML I IEC SPANK & PIERCE P A SPANK & PIERCEI IF...implementation, the Walnut Cell will utilize 50% of the "As-Is" floor space. 106 -EGREflSEII HSL 59 i.CUT OFF EXTRUSION 2. SPANK & PIERCE I 3.DEGREASE 4...FEMALE MALE CUT-OFF EXTRUSION I HOUSNG HOUNG I SPANK & PIERCE SPANK & PIERCE I CLEAN I DEG SE I I DEGREASEI I C P P E R PL A TE I HEAT TREAT I HEAT
Pajor, Anna J; Broniarczyk-Dyła, Grażyna; Świtalska, Julita
2015-01-01
The aim of the study was to determine the level of life satisfaction and the various dimensions of self-esteem of pierced or tattooed people, and evaluate their mental health, compared to those without similar body modifications. The study was conducted on a sample of 449 people aged 16-58 years (mean age 26.7 ± 6.35), of whom 308 had body modifications: tattoo (n = 90), body piercings in places other than the ear lobe (n = 53), or both tattoos and piercings (n = 165). The control group consisted of 141 people without such modifications. The participants completed a questionnaire concerning their socio-demographic status, as well as the following psychological tests: The Satisfaction with Life Scale (SWLS), Multidimensional Self-Esteem Inventory (MSEI) and General Health Questionnaire (GHQ-28). Our findings show no significant differences in terms of life satisfaction between the group with tattoos or piercings and the control group. People with body modifications were characterized by higher self-esteem, with regard to their competence and leadership abilities. They also display fewer symptoms of social impairment and sleep disorders than the control group. Tattoos and piercings should not be considered as indicators of psychopathology.
ERIC Educational Resources Information Center
Labatt, Joseph; Forrest, Michael
2016-01-01
James M. Cain used his literary skills to incorporate business and business law concepts into a best-selling novel, "Mildred Pierce." Set in the Great Depression era, "Mildred Pierce" tells the story of a divorced woman who raises two daughters on her own, while building a restaurant and bakery business. Even in today's popular…
Nipple piercing may be contraindicated in male patients with chest implants.
de Kleer, N; Cohen, M; Semple, J; Simor, A; Antonyshyn, O
2001-08-01
The authors present a man who underwent chest augmentation and nipple piercing. The patient developed chronic nipple infection, which led to unnecessary invasive diagnostic procedures, serious implant infection, and eventually urgent explantation. This unfavorable scenario illustrates the distinct features of the procedure in men, which includes close proximity of the nipple to the implant and reduced awareness by health care providers. Based on this case the authors recommend avoiding nipple piercing in men with chest implants.
... Ear piercing (especially piercing of the cartilage) Contact sports Trauma to the side of the head Ear ... external ear. In: Flint PW, Haughey BH, Lund V, et al, eds. Cummings Otolaryngology . 6th ed. Philadelphia, ...
Self-Pierce Riveting of Three Aluminium Alloy and Mild Steel Sheets
DOE Office of Scientific and Technical Information (OSTI.GOV)
Mori, K.; Abe, Y.; Sakai, S.
2010-06-15
Three aluminium alloy and steel sheets were joined with a self-piercing rivet. Self-pierce riveting has the function of joining steel and aluminium alloys having very different melting points due to plastic joining. The requisites for joining the three sheets are the driving of the rivet leg through the middle sheet, the flaring of the rivet leg in the lower sheet and the prevention of the fracture of the lower sheet. The joinability for various combinations of the three sheets was determined. When the rivet leg is small, no driving through the middle sheet occurs, the lower sheet ruptures for amore » large rivet leg. In addition, 980 MPa high strength steel, mild steel and aluminium alloy sheets were joined by the self-pierce riveting.« less
... weeks. Then you can start enjoying your pierced ears again! Reviewed by: Steven Dowshen, MD Date reviewed: September ... All information on KidsHealth® is for educational purposes only. For specific medical advice, diagnoses, and treatment, ...
The EPA is providing notice of a proposed Administrative Penalty Assessment against Pierce Lumber, Inc. (“Respondent”), located at 1629 13th Street, Belle Plaine, IA for alleged violations of its National Pollutant Discharge Elimination System permit (perm
30 CFR 56.7802 - Oxygen hose lines.
Code of Federal Regulations, 2011 CFR
2011-07-01
... SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-SURFACE METAL AND NONMETAL MINES Drilling and Rotary Jet Piercing Rotary Jet Piercing § 56.7802 Oxygen hose lines. Safety chains or other suitable locking devices...
30 CFR 56.7802 - Oxygen hose lines.
Code of Federal Regulations, 2010 CFR
2010-07-01
... SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-SURFACE METAL AND NONMETAL MINES Drilling and Rotary Jet Piercing Rotary Jet Piercing § 56.7802 Oxygen hose lines. Safety chains or other suitable locking devices...
30 CFR 56.7803 - Lighting the burner.
Code of Federal Regulations, 2010 CFR
2010-07-01
... SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-SURFACE METAL AND NONMETAL MINES Drilling and Rotary Jet Piercing Rotary Jet Piercing § 56.7803 Lighting the burner. A suitable means of protection shall be...
30 CFR 56.7803 - Lighting the burner.
Code of Federal Regulations, 2011 CFR
2011-07-01
... SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-SURFACE METAL AND NONMETAL MINES Drilling and Rotary Jet Piercing Rotary Jet Piercing § 56.7803 Lighting the burner. A suitable means of protection shall be...
Avoiding Infection After Ear Piercing
... in fact, some piercing instruments themselves can put the gold posts in place at the same time, thus ... probing that can increase the chance of infection. The gold in the posts will reduce the risk of ...
21. Historic American Buildings Survey Copyright C.C. Pierce Original: ...
21. Historic American Buildings Survey Copyright - C.C. Pierce Original: About 1902 Re-photo: April 1940 QUANDRANGLE (view from north) - Mission Nuestra Senora de la Soledad, Soledad, Monterey County, CA
Complications following oral piercing. A study among 201 young adults in Strasbourg, France.
Hickey, B M; Schoch, E A; Bigeard, L; Musset, A M
2010-03-01
This study was designed to identify and quantify the number and type of complications relating to the oral environment following piercing of tissue in the oral sphere. The epidemiological survey included patients attending the University of Strasbourg Dental Hospital, students frequenting the University of Strasbourg canteen, and members of the public attending piercing conferences in Strasbourg, France between the months of February and June 2005. No dental examination was performed as part of this survey. RESULTS; 201 people were interviewed in this study. The average subject age was 22.7 years and 73.6% were smokers. Women comprised 72.6% of the sample population. Post-piercing complications occurred in 23.4%, but frequency depended on piercing location in relation to the oral sphere. Gingival recession occurred in 8.5%, and chipped teeth in 6.9% of the group who were aware of complications. Titanium, stainless steel and Teflon were associated with recession in 52.9%, 23.5% and 9%, and chipped teeth in 35.7%, 42.9% and 14.3% of this group respectively. The occurrence of complications was high. There is a need for public education and a further study with a dental examination.
30 CFR 56.7807 - Flushing the combustion chamber.
Code of Federal Regulations, 2011 CFR
2011-07-01
... Rotary Jet Piercing Rotary Jet Piercing § 56.7807 Flushing the combustion chamber. The combustion chamber of a jet drill stem which has been sitting unoperated in a drill hole shall be flushed with a...
30 CFR 57.7807 - Flushing the combustion chamber.
Code of Federal Regulations, 2011 CFR
2011-07-01
... and Rotary Jet Piercing Rotary Jet Piercing-Surface Only § 57.7807 Flushing the combustion chamber. The combustion chamber of a jet drill stem which has been sitting unoperated in a drill hole shall be...
30 CFR 56.7807 - Flushing the combustion chamber.
Code of Federal Regulations, 2010 CFR
2010-07-01
... Rotary Jet Piercing Rotary Jet Piercing § 56.7807 Flushing the combustion chamber. The combustion chamber of a jet drill stem which has been sitting unoperated in a drill hole shall be flushed with a...
30 CFR 57.7807 - Flushing the combustion chamber.
Code of Federal Regulations, 2010 CFR
2010-07-01
... and Rotary Jet Piercing Rotary Jet Piercing-Surface Only § 57.7807 Flushing the combustion chamber. The combustion chamber of a jet drill stem which has been sitting unoperated in a drill hole shall be...
19. Historic American Buildings Survey E. A. Shuster, Jr., Photographer ...
19. Historic American Buildings Survey E. A. Shuster, Jr., Photographer (U.S. Geological Survey) September 4, 1899 copy PIERCE MILL DAM - Pierce Mill, Tilden Street & Beach Drive Northwest, Washington, District of Columbia, DC
Piercing the upper ear: a simple infection, a difficult reconstruction.
Cicchetti, S; Skillman, J; Gault, D T
2002-04-01
Piercing the upper ear to retain jewellery is now commonplace. When infection ensues, devastating chondritis leads to collapse of the ear. To our knowledge, the surgical reconstruction of post-piercing deformities has not been documented in the literature. We present five such cases referred for autogenous-tissue ear reconstruction. In four of these, the destroyed segments of ear cartilage were replaced with a carved costal-cartilage framework. One patient declined surgery. The importance of preventing infection is stressed. Copyright 2002 The British Association of Plastic Surgeons.
Tattoos, piercing, and sexual behaviors in young adults.
Nowosielski, Krzysztof; Sipiński, Adam; Kuczerawy, Ilona; Kozłowska-Rup, Danuta; Skrzypulec-Plinta, Violetta
2012-09-01
Body piercing and tattooing are accepted by a growing number of teenagers and young adults as a way of self-expressing. Some authors suggest association between body piercings/tattoos and early sexual initiation, higher number of sexual partners, or risky sexual behaviors. The aim of the study was to evaluate sexual behaviors among young adults with body modifications (BMs)--tattoos and piercings. One hundred twenty young healthy adults, ages between 20 and 35, were included in the population study. The study group was divided into three subgroups: controls (N = 60), adults with tattoos (N = 28), and adults with piercings (N = 32). The research instrument was a self-prepared questionnaire containing 59 questions assessing socioepidemiological parameters, sexual behaviors, incidents of sexual harassment in the past, and self-attractiveness evaluation, as well as questions concerning tattoos and piercings. Socioepidemiological variables and sexual behaviors were compared between subgroups. To assess and describe the correlation between having BM--tattoos and piercing--and sexual behaviors in the population of young adults by using the logistic regression model. Adults with BMs have had their first intercourse statistically earlier and were more sexually active compared with controls. There were no statically significant differences in sexual orientation, sexual preferences, engaging in risky sexual behaviors, frequency of masturbation, and history of sexual abuse between the groups. In contrast, the frequency of sexual intercourses was statistically higher and oral sex was more likely to be a dominant sexual activity in adults with BM compared with controls. The multivariate logistic model revealed that adults with BM were four times less likely to participate in religious practices and twice more likely to have early sexual initiation. Having BM is associated with early sexual initiation and more liberal attitudes toward sexual behaviors but not with engaging in risky sexual behaviors. © 2012 International Society for Sexual Medicine.
Extendable mast used in one shot soil penetrometer
NASA Technical Reports Server (NTRS)
Hotz, G. M.; Howard, G. A.
1966-01-01
Penetrometer to test soil characteristics has a piercing head with soil instrumentation equipment attached to an expandable mast actuated by compressed air. The penetrometer gives continuous measurements as the mast pushes the piercing head through the soil.
Allergies associated with body piercing and tattoos: a report of the Allergy Vigilance Network.
Dron, P; Lafourcade, M P; Leprince, F; Nonotte-Varly, C; Van Der Brempt, X; Banoun, L; Sullerot, I; This-Vaissette, C; Parisot, L; Moneret-Vautrin, D A
2007-06-01
Body piercing and tattooing are increasingly common. As well as the risk of infection and scarring, allergic reactions are also reported. This is the first multi-centre study to assess the frequency of consultations for allergy. Of the 138 allergologists who answered our two questionnaires, 7.9% reported allergic reactions associated with body piercing and 18.9% identified allergies associated with temporary henna-based tattoos. Contact eczema, rhinitis and urticaria were related to nickel allergy. Contact eczema, generalized eczema, pruritus and edema were caused by tattoos. In 20 out of 28 cases, sensitization to para-phenylenediamine (PPD) was observed. The authors review the literature, underscoring the risk of serious allergy to PPD, the need for long-term monitoring of the risk of skin lymphocytoma, the difficulties met during treatment and the necessity of regulating tattooing and body piercing practices.
Moura, Elaine Cristina Carvalho; Moreira, Maria de Fátima Santana; da Fonseca, Soraia Martins
2009-01-01
This study aimed to analyze the knowledge of nursing auxiliaries and technicians in handling and disposing of piercing-cutting material and describe their performance. This qualitative-descriptive research was carried out with three nursing auxiliaries and 12 technicians at a medium-size hospital, totaling 15 participants interviewed through a semi-structured script. Discourse was analyzed through the content analysis technique. Results appoint that, even though the participants have theoretical knowledge on the management of piercing-cutting material, they do not totally follow their knowledge, which exposes them to several biological risks, revealing reproductive knowledge and performance. Thus, we propose the implementation of continuing education programs based on constructivist methodological approach aiming at effective practices in the management and disposal of piercing-cutting material. In this perspective, research clarifying how adults apprehend knowledge can deepen the results described in the study.
Hail, Daymon; Mitchell, Forrest; Lauzière, Isabelle; Marshall, Patrick; Brady, Jeff; Bextine, Blake
2010-01-01
The glassy-winged sharpshooter, Homalodisca vitripeninis Germar (Hemiptera: Cicadellidae), is a xylophagous insect that is an endemic pest of several economically important plants in Texas. H. vitripennis is the main vector of Xylella fastidiosa Wells (Xanthomonadales: Xanthomonadaceae), the bacterium that causes Pierce's disease of grapevine and can travel long distances putting much of Texas grape production at risk. Understanding the movement of H. vitripennis populations capable of transmitting X. fastidiosa into Pierce's-disease-free areas is critical for developing a management program for Pierce's disease. To that end, the USDA-APHIS has developed a program to sample vineyards across Texas to monitor populations of H. vitripennis. From this sampling, H vitripennis collected during 2005 and 2006 over the months of May, June, and July from eight vineyards in different regions of Texas were recovered from yellow sticky traps and tested for the presence of X. fastidiosa. The foregut contents were vacuum extracted and analyzed using RT-PCR to determine the percentage of H. vitripennis within each population that harbor X. fastidiosa and have the potential to transmit this pathogen. H. vitripennis from vineyards known to have Pierce's disease routinely tested positive for the presence of X. fastidiosa. While almost all H. vitripennis collected from vineyards with no history of Pierce's disease tested negative for the presence of the pathogen, three individual insects tested positive. Furthermore, all three insects were determined, by DNA sequencing, to be carrying a strain of X. fastidiosa homologous to known Pierce's disease strains, signifying them as a risk factor for new X. fastidiosa infections.
Hail, Daymon; Mitchell, Forrest; Lauzière, Isabelle; Marshall, Patrick; Brady, Jeff; Bextine, Blake
2010-01-01
The glassy-winged sharpshooter, Homalodisca vitripeninis Germar (Hemiptera: Cicadellidae), is a xylophagous insect that is an endemic pest of several economically important plants in Texas. H. vitripennis is the main vector of Xylella fastidiosa Wells (Xanthomonadales: Xanthomonadaceae), the bacterium that causes Pierce's disease of grapevine and can travel long distances putting much of Texas grape production at risk. Understanding the movement of H. vitripennis populations capable of transmitting X. fastidiosa into Pierce's-disease-free areas is critical for developing a management program for Pierce's disease. To that end, the USDA-APHIS has developed a program to sample vineyards across Texas to monitor populations of H. vitripennis. From this sampling, H vitripennis collected during 2005 and 2006 over the months of May, June, and July from eight vineyards in different regions of Texas were recovered from yellow sticky traps and tested for the presence of X. fastidiosa. The foregut contents were vacuum extracted and analyzed using RT-PCR to determine the percentage of H. vitripennis within each population that harbor X. fastidiosa and have the potential to transmit this pathogen. H. vitripennis from vineyards known to have Pierce's disease routinely tested positive for the presence of X. fastidiosa. While almost all H. vitripennis collected from vineyards with no history of Pierce's disease tested negative for the presence of the pathogen, three individual insects tested positive. Furthermore, all three insects were determined, by DNA sequencing, to be carrying a strain of X. fastidiosa homologous to known Pierce's disease strains, signifying them as a risk factor for new X. fastidiosa infections. PMID:21062210
Pierce Lumber, Inc. - Clean Water Act Public Notice
The EPA is providing notice of a proposed Administrative Penalty Assessment against Pierce Lumber, Inc. (“Respondent”), located at 1629 13th Street, Belle Plaine, IA for alleged violations of its National Pollutant Discharge Elimination System permit (perm
20. Historic American Buildings Survey Reproduction of Print Loaned by ...
20. Historic American Buildings Survey Reproduction of Print Loaned by Mr. Pollen Jewett, Nyack, New York. Taken about 1900. copy PIERCE MILL DAM FROM VICINITY OF MILL - Pierce Mill, Tilden Street & Beach Drive Northwest, Washington, District of Columbia, DC
Franklin Pierce College's Fire Department: 17 Student Volunteers and a Vintage Engine.
ERIC Educational Resources Information Center
Meyer, Thomas J.
1985-01-01
Seventeen student volunteers form the Franklin Pierce College Fire Department. When the firefighters are on duty, they must carry electronic pagers at all times. They also participate in dormitory inspections and attend weekend sessions at a local firefighters' training school. (MLW)
The NASA/IPAC Teacher Archive Research Program (NITARP) at Pierce College
NASA Astrophysics Data System (ADS)
Mallory, Carolyn R.; Feig, M.; Mahmud, N.; Silic, T.; Rebull, L.; Hoette, V.; Johnson, C.; McCarron, K.
2011-01-01
Our team from Pierce Community College, Woodland Hills, CA, participated in the NASA/IPAC Teacher Archive Research Program (NITARP) this past year (2010). (NITARP is described in another poster, Rebull et al.) Our team worked with archival Spitzer, 2MASS, and optical data to look for young stars in CG4, part of the Gum Nebula; our scientific results are described in a companion poster, Johnson et al. In this poster, we describe more about what we learned and how we incorporated our NITARP experiences into the Pierce College environment. Students developed critical thinking skills and an ability to organize their data analysis and develop a mental "big picture" of what is going on in the CG4 region. The NITARP program is one of several "Active Learning" programs going on at Pierce, and the other programs are briefly summarized in this poster as well. This program was made possible through the NASA/IPAC Teacher Archive Research Project (NITARP) and was funded by NASA Astrophysics Data Program and Archive Outreach funds.
Fernandez, André de Paula; Castro Neto, Ivan de; Anias, Christiane Ribeiro; Pinto, Patrícia Ciminelli Linhares; Castro, Jair de Carvalho E; Carpes, Arturo Frick
2008-01-01
Piercing has become more and more popular among adolescents. The procedure is generally performed by unqualified professionals and carries its risk. Non-sterilized material or inappropiate hygiene increases the possibility of perichondritis and celulitis. The disease is characterized by erythema of the auricula pinna, unbearable pain and fever. Left untreated, the condition progresses with edema along the auricula and abscess formation that may result in ischemic necrosis and a cauliflower anesthetic deformation. The most common bacteria is Pseudomonas aeruginosa. In cases with abscesses, drainage is necessary along with antibiotic therapy guided by cultures and antibiogram. The aim of this case report was to review the past 10 years of published papers dealing with anatomical aspects of the auricular pinna, the history of piercing and its most common complications. A case report of perichondritis after 'high' ear piercing that required surgical treatment and that progressed with no esthetic loss. Theoretical and practical experience based on a review and a report of a case that progressed satisfactorily. The increased incidence of perichondritis in adolescents should require more elaborated primary prevention measures.
Ground-water resources of Benson and Pierce Counties, north-central North Dakota
Randich, P.G.
1972-01-01
The purpose of this investigation is to provide information about the ground-water resources in Benson and Pierce Counties that is sufficient for planning the safe and intelligent development of water supplies for irrigation, domestic, stock, industrial, and municipal purposes. The investigation is part of a statewide program to determine the location and extent of ground-water aquifers; to evaluate the occurrence and movement of ground water within the aquifers, including sources of recharge and discharge; to determine potential yields to wells developed in the aquifers; and to determine the chemical quality of ground water.Benson and Pierce Counties cover an area of 2,512 square miles in north-central North Dakota. This study, which began in July 1967 and was completed in June 1971, was made cooperatively by the U.S. Geological Survey, the North Dakota State Water Commission, the North Dakota Geological Survey, and the Benson and Pierce Counties Water Management Districts. This interim report presents only the major conclusions of the study.
Meijer, C; Bredberg, M; Fischer, T; Widström, L
1995-03-01
Piercing the earlobes has increased in popularity among males in recent years. This habit would be expected to increase the incidence of nickel and cobalt sensitization. Patch testing with nickel sulfate and cobalt chloride was performed in 520 young Swedish men doing compulsory military service. The overall frequency of nickel/cobalt positive tests was 4.2%. The prevalence of nickel/cobalt positive tests was significantly higher (p < 0.05) in 152 men with pierced earlobes (7.9%) than in those 368 with unpierced earlobes (2.7%). A history of hand eczema (7/152 = 4.6%) or other types of eczema (22/152 = 14.5%) in individuals with pierced earlobes was no more common than in those with unpierced earlobes: 24/368 = 6.5% and 51/386 = 13.9%, respectively (n.s.). Hand eczema was no more common in sensitized (1/22 = 4.5%) than in nonsensitized individuals (32/498 = 6.4%) (n.s.).
Mixed Pierce-two-stream instability development in an extraction system of a negative ion source
DOE Office of Scientific and Technical Information (OSTI.GOV)
Barminova, H. Y., E-mail: barminova@mephi.ru; Chikhachev, A. S.
2016-02-15
Mixed Pierce-two-stream instability may occur in an extraction system of a negative ion source based on a volume-produced plasma. The reasons for instability development are discussed. Analytically the conditions of unstable beam propagation are determined. The instability threshold is shown to be increased compared with the pure Pierce instability. The influence of inclined perturbations on the instability behavior is investigated. The numerical calculations are performed in COMSOL Multiphysics. The simulation results confirm the existence of such a mixed instability appearance that develops due to both the electrons of the external circuit and the background positive ions.
27 CFR 478.37 - Manufacture, importation and sale of armor piercing ammunition.
Code of Federal Regulations, 2012 CFR
2012-04-01
... and sale of armor piercing ammunition. 478.37 Section 478.37 Alcohol, Tobacco Products, and Firearms BUREAU OF ALCOHOL, TOBACCO, FIREARMS, AND EXPLOSIVES, DEPARTMENT OF JUSTICE FIREARMS AND AMMUNITION COMMERCE IN FIREARMS AND AMMUNITION Administrative and Miscellaneous Provisions § 478.37 Manufacture...
27 CFR 478.37 - Manufacture, importation and sale of armor piercing ammunition.
Code of Federal Regulations, 2011 CFR
2011-04-01
... and sale of armor piercing ammunition. 478.37 Section 478.37 Alcohol, Tobacco Products, and Firearms BUREAU OF ALCOHOL, TOBACCO, FIREARMS, AND EXPLOSIVES, DEPARTMENT OF JUSTICE FIREARMS AND AMMUNITION COMMERCE IN FIREARMS AND AMMUNITION Administrative and Miscellaneous Provisions § 478.37 Manufacture...
27 CFR 478.37 - Manufacture, importation and sale of armor piercing ammunition.
Code of Federal Regulations, 2013 CFR
2013-04-01
... and sale of armor piercing ammunition. 478.37 Section 478.37 Alcohol, Tobacco Products, and Firearms BUREAU OF ALCOHOL, TOBACCO, FIREARMS, AND EXPLOSIVES, DEPARTMENT OF JUSTICE FIREARMS AND AMMUNITION COMMERCE IN FIREARMS AND AMMUNITION Administrative and Miscellaneous Provisions § 478.37 Manufacture...
27 CFR 478.37 - Manufacture, importation and sale of armor piercing ammunition.
Code of Federal Regulations, 2014 CFR
2014-04-01
... and sale of armor piercing ammunition. 478.37 Section 478.37 Alcohol, Tobacco Products, and Firearms BUREAU OF ALCOHOL, TOBACCO, FIREARMS, AND EXPLOSIVES, DEPARTMENT OF JUSTICE FIREARMS AND AMMUNITION COMMERCE IN FIREARMS AND AMMUNITION Administrative and Miscellaneous Provisions § 478.37 Manufacture...
Rules of Appointment at Franklin Pierce College.
ERIC Educational Resources Information Center
Franklyn Pierce Coll., Rindge, NH.
This memorandum sets forth the regulations and procedures affecting appointments to the instructional faculty of Franklin Pierce College. Part A: General Provisions, includes information on faculty ranks, the procedure of appointment, the regular review, and normal retirement. Part B deals with the terms and conditions of appointment, including…
30 CFR 56.7805 - Smoking and open flames.
Code of Federal Regulations, 2013 CFR
2013-07-01
... 30 Mineral Resources 1 2013-07-01 2013-07-01 false Smoking and open flames. 56.7805 Section 56... Jet Piercing Rotary Jet Piercing § 56.7805 Smoking and open flames. Persons shall not smoke and open... smoking and open flames shall be posted in these areas. ...
30 CFR 56.7805 - Smoking and open flames.
Code of Federal Regulations, 2014 CFR
2014-07-01
... 30 Mineral Resources 1 2014-07-01 2014-07-01 false Smoking and open flames. 56.7805 Section 56... Jet Piercing Rotary Jet Piercing § 56.7805 Smoking and open flames. Persons shall not smoke and open... smoking and open flames shall be posted in these areas. ...
30 CFR 56.7805 - Smoking and open flames.
Code of Federal Regulations, 2010 CFR
2010-07-01
... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Smoking and open flames. 56.7805 Section 56... Jet Piercing Rotary Jet Piercing § 56.7805 Smoking and open flames. Persons shall not smoke and open... smoking and open flames shall be posted in these areas. ...
30 CFR 56.7805 - Smoking and open flames.
Code of Federal Regulations, 2011 CFR
2011-07-01
... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Smoking and open flames. 56.7805 Section 56... Jet Piercing Rotary Jet Piercing § 56.7805 Smoking and open flames. Persons shall not smoke and open... smoking and open flames shall be posted in these areas. ...
30 CFR 56.7805 - Smoking and open flames.
Code of Federal Regulations, 2012 CFR
2012-07-01
... 30 Mineral Resources 1 2012-07-01 2012-07-01 false Smoking and open flames. 56.7805 Section 56... Jet Piercing Rotary Jet Piercing § 56.7805 Smoking and open flames. Persons shall not smoke and open... smoking and open flames shall be posted in these areas. ...
USDA-ARS?s Scientific Manuscript database
Studying feeding, plant damage, and transmission of plant pathogens by hemipteran insect pests is challenging. Hemipteran piercing-sucking mouthparts, the stylets, are probed into opaque plant tissues precluding direct observation. This challenge was overcome by the invention of electropenetrography...
Cis-12-oxo-phytodienoic acid stimulates rice defense response to a piercing-sucking insect.
Guo, Hui-Min; Li, Hai-Chao; Zhou, Shi-Rong; Xue, Hong-Wei; Miao, Xue-Xia
2014-11-01
The brown planthopper (BPH, Nilaparvata lugens) is a destructive, monophagous, piercing-sucking insect pest of rice. Previous studies indicated that jasmonic acid (JA) positively regulates rice defense against chewing insect pests but negatively regulates it against the piercing-sucking insect of BPH. We here demonstrated that overexpression of allene oxide cyclase (AOC) but not OPR3 (cis-12-oxo-phytodienoic acid (OPDA) reductase 3, an enzyme adjacent to AOC in the JA synthetic pathway) significantly increased rice resistance to BPH, mainly by reducing the feeding activity and survival rate. Further analysis revealed that plant response to BPH under AOC overexpression was independent of the JA pathway and that significantly higher OPDA levels stimulated rice resistance to BPH. Microarray analysis identified multiple candidate resistance-related genes under AOC overexpression. OPDA treatment stimulated the resistance of radish seedlings to green peach aphid Myzus persicae, another piercing-sucking insect. These results imply that rice resistance to chewing insects and to sucking insects can be enhanced simultaneously through AOC-mediated increases of JA and OPDA and provide direct evidence of the potential application of OPDA in stimulating plant defense responses to piercing-sucking insect pests in agriculture. © The Author 2014. Published by the Molecular Plant Shanghai Editorial Office in association with Oxford University Press on behalf of CSPB and IPPE, SIBS, CAS.
27 CFR 478.37 - Manufacture, importation and sale of armor piercing ammunition.
Code of Federal Regulations, 2010 CFR
2010-04-01
... 27 Alcohol, Tobacco Products and Firearms 3 2010-04-01 2010-04-01 false Manufacture, importation... COMMERCE IN FIREARMS AND AMMUNITION Administrative and Miscellaneous Provisions § 478.37 Manufacture, importation and sale of armor piercing ammunition. No person shall manufacture or import, and no manufacturer...
Pierce Butler's "An Introduction to Library Science: A Tract for Our Times? A Review Article
ERIC Educational Resources Information Center
Cronin, Blaise
2004-01-01
Considers the historic and contemporary import of Pierce Butler's "An Introduction to Library Science". Characterizes the content of each chapter and critically analyses the central theses. Relates Butler's positivistic premises, assumptions and conclusions to the congeries of competing epistemological and ideological standpoints that defines…
ERIC Educational Resources Information Center
Watkins, Nicole L.
2012-01-01
The nature of racism in the United States has transformed from overt prejudice and blatant discrimination to more covert, embedded, ambiguous manifestations called racial microaggressions (Constantine, 2007; Pierce, Carew, Pierce-Gonzalez, & Willis, 1978; Sue, Capidolupo et al., 2007). Researchers have demonstrated the unique, harmful, and…
30 CFR 56.7807 - Flushing the combustion chamber.
Code of Federal Regulations, 2014 CFR
2014-07-01
... 30 Mineral Resources 1 2014-07-01 2014-07-01 false Flushing the combustion chamber. 56.7807 Section 56.7807 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND... Rotary Jet Piercing Rotary Jet Piercing § 56.7807 Flushing the combustion chamber. The combustion chamber...
30 CFR 56.7807 - Flushing the combustion chamber.
Code of Federal Regulations, 2013 CFR
2013-07-01
... 30 Mineral Resources 1 2013-07-01 2013-07-01 false Flushing the combustion chamber. 56.7807 Section 56.7807 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND... Rotary Jet Piercing Rotary Jet Piercing § 56.7807 Flushing the combustion chamber. The combustion chamber...
30 CFR 56.7807 - Flushing the combustion chamber.
Code of Federal Regulations, 2012 CFR
2012-07-01
... 30 Mineral Resources 1 2012-07-01 2012-07-01 false Flushing the combustion chamber. 56.7807 Section 56.7807 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND... Rotary Jet Piercing Rotary Jet Piercing § 56.7807 Flushing the combustion chamber. The combustion chamber...
30 CFR 57.7802 - Oxygen hose lines.
Code of Federal Regulations, 2012 CFR
2012-07-01
... 30 Mineral Resources 1 2012-07-01 2012-07-01 false Oxygen hose lines. 57.7802 Section 57.7802... Jet Piercing Rotary Jet Piercing-Surface Only § 57.7802 Oxygen hose lines. Safety chains or other suitable locking devices shall be provided across connections to and between high pressure oxygen hose...
30 CFR 57.7802 - Oxygen hose lines.
Code of Federal Regulations, 2011 CFR
2011-07-01
... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Oxygen hose lines. 57.7802 Section 57.7802... Jet Piercing Rotary Jet Piercing-Surface Only § 57.7802 Oxygen hose lines. Safety chains or other suitable locking devices shall be provided across connections to and between high pressure oxygen hose...
30 CFR 57.7802 - Oxygen hose lines.
Code of Federal Regulations, 2014 CFR
2014-07-01
... 30 Mineral Resources 1 2014-07-01 2014-07-01 false Oxygen hose lines. 57.7802 Section 57.7802... Jet Piercing Rotary Jet Piercing-Surface Only § 57.7802 Oxygen hose lines. Safety chains or other suitable locking devices shall be provided across connections to and between high pressure oxygen hose...
30 CFR 57.7802 - Oxygen hose lines.
Code of Federal Regulations, 2013 CFR
2013-07-01
... 30 Mineral Resources 1 2013-07-01 2013-07-01 false Oxygen hose lines. 57.7802 Section 57.7802... Jet Piercing Rotary Jet Piercing-Surface Only § 57.7802 Oxygen hose lines. Safety chains or other suitable locking devices shall be provided across connections to and between high pressure oxygen hose...
30 CFR 57.7802 - Oxygen hose lines.
Code of Federal Regulations, 2010 CFR
2010-07-01
... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Oxygen hose lines. 57.7802 Section 57.7802... Jet Piercing Rotary Jet Piercing-Surface Only § 57.7802 Oxygen hose lines. Safety chains or other suitable locking devices shall be provided across connections to and between high pressure oxygen hose...
27 CFR 478.148 - Armor piercing ammunition intended for sporting or industrial purposes.
Code of Federal Regulations, 2010 CFR
2010-04-01
... intended for sporting or industrial purposes. 478.148 Section 478.148 Alcohol, Tobacco Products, and... ammunition intended for sporting or industrial purposes. The Director may exempt certain armor piercing... for any such ammunition which is primarily intended for sporting purposes or intended for industrial...
A Commentary on "Piercing the Bubble": Should Management Education "Confront" Poverty?
ERIC Educational Resources Information Center
Dart, Raymond
2008-01-01
This commentary contrasts "Piercing the Bubble" by proposing "pull" (rather than "push") strategies as a way for business schools to more meaningfully engage poverty and social exclusion. By reframing poverty issues in such a manner that they connect with core business student interests of career opportunities, current management practices, and…
The Fateful Rift: The San Andreas Fault in the Modern Mind.
ERIC Educational Resources Information Center
Percy, Walker
1990-01-01
Claims that modern science is radically incoherent and that this incoherence lies within the practice of science. Details the work of the scientist and philosopher Charles Sanders Pierce, expounding on the difference between Rene Descartes' dualistic philosophy and Pierce's triadic view. Concludes with a brief description of the human existence.…
Sidewall penetrator for oil wells
NASA Technical Reports Server (NTRS)
Collins, E. R., Jr.
1981-01-01
Penetrator bores horizontal holes in well casing to increase trapped oil drainage. Several penetrators operated by common drive are inserted into well at once. Shaft, made from spiraling cable, rotates and thrusts simultaneously through rigid curvilinear guide tube forcing bit through casing into strata. Device pierces more deeply than armor-piercing bullets and shaped explosive charges.
30 CFR 57.7807 - Flushing the combustion chamber.
Code of Federal Regulations, 2014 CFR
2014-07-01
... 30 Mineral Resources 1 2014-07-01 2014-07-01 false Flushing the combustion chamber. 57.7807... and Rotary Jet Piercing Rotary Jet Piercing-Surface Only § 57.7807 Flushing the combustion chamber. The combustion chamber of a jet drill stem which has been sitting unoperated in a drill hole shall be...
30 CFR 57.7807 - Flushing the combustion chamber.
Code of Federal Regulations, 2013 CFR
2013-07-01
... 30 Mineral Resources 1 2013-07-01 2013-07-01 false Flushing the combustion chamber. 57.7807... and Rotary Jet Piercing Rotary Jet Piercing-Surface Only § 57.7807 Flushing the combustion chamber. The combustion chamber of a jet drill stem which has been sitting unoperated in a drill hole shall be...
30 CFR 57.7807 - Flushing the combustion chamber.
Code of Federal Regulations, 2012 CFR
2012-07-01
... 30 Mineral Resources 1 2012-07-01 2012-07-01 false Flushing the combustion chamber. 57.7807... and Rotary Jet Piercing Rotary Jet Piercing-Surface Only § 57.7807 Flushing the combustion chamber. The combustion chamber of a jet drill stem which has been sitting unoperated in a drill hole shall be...
Draft Genome Sequence of Xylella fastidiosa subsp. fastidiosa Strain Stag's Leap.
Chen, J; Wu, F; Zheng, Z; Deng, X; Burbank, L P; Stenger, D C
2016-04-21
ITALIC! Xylella fastidiosasubsp. ITALIC! fastidiosacauses Pierce's disease of grapevine. Presented here is the draft genome sequence of the Stag's Leap strain, previously used in pathogenicity/virulence assays to evaluate grapevine germplasm bearing Pierce's disease resistance and a phenotypic assessment of knockout mutants to determine gene function. Copyright © 2016 Chen et al.
30 CFR 56.7802 - Oxygen hose lines.
Code of Federal Regulations, 2014 CFR
2014-07-01
... 30 Mineral Resources 1 2014-07-01 2014-07-01 false Oxygen hose lines. 56.7802 Section 56.7802... Piercing Rotary Jet Piercing § 56.7802 Oxygen hose lines. Safety chains or other suitable locking devices shall be provided across connections to and between high pressure oxygen hose lines of 1-inch inside...
30 CFR 56.7802 - Oxygen hose lines.
Code of Federal Regulations, 2012 CFR
2012-07-01
... 30 Mineral Resources 1 2012-07-01 2012-07-01 false Oxygen hose lines. 56.7802 Section 56.7802... Piercing Rotary Jet Piercing § 56.7802 Oxygen hose lines. Safety chains or other suitable locking devices shall be provided across connections to and between high pressure oxygen hose lines of 1-inch inside...
30 CFR 56.7802 - Oxygen hose lines.
Code of Federal Regulations, 2013 CFR
2013-07-01
... 30 Mineral Resources 1 2013-07-01 2013-07-01 false Oxygen hose lines. 56.7802 Section 56.7802... Piercing Rotary Jet Piercing § 56.7802 Oxygen hose lines. Safety chains or other suitable locking devices shall be provided across connections to and between high pressure oxygen hose lines of 1-inch inside...
Improving Immunization Coverage in a Rural School District in Pierce County, Washington
ERIC Educational Resources Information Center
Peterson, Robin M.; Cook, Carolyn; Yerxa, Mary E.; Marshall, James H.; Pulos, Elizabeth; Rollosson, Matthew P.
2012-01-01
Washington State has some of the highest percentages of school immunization exemptions in the country. We compared school immunization records in a rural school district in Pierce County, Washington, to immunization records in the state immunization information system (IIS) and parent-held records. Correcting school immunization records resulted…
Identifying DNA Methylation Features that Underlie Prostate Cancer Disparities
2015-10-01
variant analysis U01 HG007601 (Pierce, B.) NIH/NHGRI 8/1/2014 - 5/31/2017 Direct Cost: $201,814 1 Cal. Month Telomere length and chromosomal...Month Telomere length and chromosomal instability across various tissue types R01 ES023834 (Pierce, B.) NIH/NCI 4/1/14 - 3/31/18 Direct Cost
NASA Technical Reports Server (NTRS)
Montgomery, Kevin; Bruyns, Cynthia D.
2002-01-01
We present schemes for real-time generalized interactions such as probing, piercing, cauterizing and ablating virtual tissues. These methods have been implemented in a robust, real-time (haptic rate) surgical simulation environment allowing us to model procedures including animal dissection, microsurgery, hysteroscopy, and cleft lip repair.
26 CFR 301.7430-1 - Exhaustion of administrative remedies.
Code of Federal Regulations, 2010 CFR
2010-04-01
... March 3, in the name of F. On April 2, F pays the entire liability thereby satisfying the lien. On May 2... revenue ruling which holds that ear piercing does not affect a function or structure of the body within... piercing and, following an examination, receives a notice of proposed deficiency (30-day letter...
26 CFR 301.7430-1 - Exhaustion of administrative remedies.
Code of Federal Regulations, 2014 CFR
2014-04-01
... March 3, in the name of F. On April 2, F pays the entire liability thereby satisfying the lien. On May 2... revenue ruling which holds that ear piercing does not affect a function or structure of the body within... piercing and, following an examination, receives a notice of proposed deficiency (30-day letter...
26 CFR 301.7430-1 - Exhaustion of administrative remedies.
Code of Federal Regulations, 2013 CFR
2013-04-01
... March 3, in the name of F. On April 2, F pays the entire liability thereby satisfying the lien. On May 2... revenue ruling which holds that ear piercing does not affect a function or structure of the body within... piercing and, following an examination, receives a notice of proposed deficiency (30-day letter...
26 CFR 301.7430-1 - Exhaustion of administrative remedies.
Code of Federal Regulations, 2012 CFR
2012-04-01
... March 3, in the name of F. On April 2, F pays the entire liability thereby satisfying the lien. On May 2... revenue ruling which holds that ear piercing does not affect a function or structure of the body within... piercing and, following an examination, receives a notice of proposed deficiency (30-day letter...
26 CFR 301.7430-1 - Exhaustion of administrative remedies.
Code of Federal Regulations, 2011 CFR
2011-04-01
... March 3, in the name of F. On April 2, F pays the entire liability thereby satisfying the lien. On May 2... revenue ruling which holds that ear piercing does not affect a function or structure of the body within... piercing and, following an examination, receives a notice of proposed deficiency (30-day letter...
The nature of cometary materials
NASA Technical Reports Server (NTRS)
Stephens, James
1989-01-01
Because cometary surfaces are likely to be far colder and of a different composition than planetary surfaces, there are some new considerations that must be examined in regards to placing instrumented packages or sample return devices on their surfaces. The qualitative analysis of the problem of attaching hardware to a comet and not being ejected back into space can be divided into two parts. The first problem is to pierce the mantle and obtain access to the icy core. Drilling through the mantle requires that the drilling forces be reacted. Reacting such forces probably requires attachment to the icy core below. Therefore, some kinetic impact piercing device is likely to be required as the first act of attachment. The second problem for a piercing device to overcome is the force produced by the impact kinetic energy that tries to eject the piercing device back into space. The mantle and icy core can absorb some of the impact kinetic energy in the form of fracture formation and friction energy. The energy that is not absorbed in these two ways is stored by the core as elastic deformation of the mantle and icy core. It is concluded that because the cometary materials are almost certainly brittle and the icy core is likely to be self lubricating, the elastic rebound and gas pressure expulsion forces must be counteracted by forces greater than those that may be provided by a piercing device or its capture devices (barbs).
NASA Astrophysics Data System (ADS)
Senn, S.; Liewald, M.
2017-09-01
Deep drawn parts often do have complex designs and, therefore, must be trimmed or punched subsequently in a second stage. Due to the complex part geometry, most punching areas do reveal critical slant angle (angle between part surface and ram movement direction) different to perpendicular direction. Piercing within a critical range of slant angle may lead to severe damage of the cutting tool. Consequently, expensive cam units are required to transform the ram moving direction in order to perform the piercing process perpendicularly to the local part surface. For modern sheet metals, however, the described critical angle of attack has not been investigated adequately until now. Therefore, cam units are used in cases in which regular piercing with high slant angle wouldn’t be possible. Purpose of this study is to investigate influencing factors and their effect on punch damage during piercing of high strength steels with slant angles. Therefore, a modular shearing tool was designed, which allows to simply switch die parts to vary cutting clearance and cutting angle. The target size of the study is to measure the lateral deviation of the punch which is monitored by an eddy current sensor. The sensor is located in the downholder and measures the lateral punch deviation in-line during manufacturing. The deviation is mainly influenced by slant angle of workpiece surface. In relation to slang angle and sheet thickness the clearance has a small influence on the measured punch deflection.
Quaranta, Alessia; Napoli, Christian; Fasano, Fabrizio; Montagna, Claudio; Caggiano, Giuseppina; Montagna, Maria Teresa
2011-10-07
The practice of tattooing and piercing has expanded in western society. In order to verify young adults' knowledge of the risk and practices related to body art, an investigation was conducted among freshmen of the University of Bari in the region of Apulia, Italy. The study was carried out in the Academic Year 2009-2010 through an anonymous self-administered written questionnaire distributed to 1.656 freshmen enrolled in 17 Degree Courses. Of the 1.598 students included in the analysis, 78.3% believe it is risky to undergo piercing/tattoo practices. AIDS was indicated as a possible infection by 60.3% of freshmen, hepatitis C by 38.2%, tetanus by 34.3% and hepatitis B by 33.7% of the sample. 28.1% of freshmen were not aware that there are also non-infectious complications. 29% of the sample had at least one piercing or tattoo (this percentage does not include earlobe piercing in women). Of those with body art, the decision to undergo body art was made autonomously in 57.9% of the participants. 56.3% of freshmen undergoing body art had taken less than a month to decide. With regard to the reasons that led the sample to undergo body art, 28.4% were unable to explain it, 23.8% answered to improve their aesthetic aspect, 18.4% to distinguish themselves from others, 12.3% for fashion; 17.1% for other reasons. 25.4% of the sample declared that they had a piercing (79.8% female vs 20.2% male; ratio M/F 1:4.0). The average age for a first piercing was 15.3 years (range 10-27; SD ± 2.9). 9.6% of the sample declared that they have a tattoo (69.9% female vs 30.1% male; ratio M/F 1:2.3). The average age for a first tattoo was 17.5 years (range 10-26, SD ± 2.4). Most of the freshmen knew about AIDS-related risks but not other potential risks. Body art is fairly common among young adults (especially women). The decision is often not shared with the family and is undertaken mostly without a specific reason or for the improvement of aesthetic aspect. Information about freshmen's knowledge, attitudes and practices could help in effective planning of health promotion strategies.
Pierce - University of Georgia | Division of Cancer Prevention
Principal Investigator: J. Michael Pierce, PhDInstitution: University of Georgia, Athens, GA Our project, Discovery and Development of Cancer Glycomarkers, is a joint collaboration between our laboratories at the CCRC, which include Karen Abbott, Lance Wells, Kevin Dobbin, and Mike Tiemeyer, those at TGen, in Phoenix, AZ, Daniel Von Hoff, Haiyong Han, and Mike Demeure, and
USDA-ARS?s Scientific Manuscript database
Proteins such as rabbit IgG and chicken IgY are markers that are easy to apply and analyze on insects for monitoring dispersal and/or pest consumption, but current application techniques are less effective in research for the large guild of piercing-sucking predators used in biocontrol. To address t...
Reflections on the Law and Curricular Values in American Schools
ERIC Educational Resources Information Center
Russo, Charles J.; Thro, William E.
2012-01-01
The Supreme Court's 1925 ruling in "Pierce v. Society of the Sisters of the Holy Names of Jesus and Mary" ("Pierce"), striking down a law from Oregon that would have required all children, other than those needing special education, between the ages of 8 and 16 to attend public schools, essentially upheld the right of nonpublic…
30 CFR 57.7805 - Smoking and open flames.
Code of Federal Regulations, 2013 CFR
2013-07-01
... 30 Mineral Resources 1 2013-07-01 2013-07-01 false Smoking and open flames. 57.7805 Section 57... Rotary Jet Piercing Rotary Jet Piercing-Surface Only § 57.7805 Smoking and open flames. Persons shall not smoke and open flames shall not be used in the vicinity of the oxygen storage and supply lines. Signs...
30 CFR 57.7805 - Smoking and open flames.
Code of Federal Regulations, 2010 CFR
2010-07-01
... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Smoking and open flames. 57.7805 Section 57... Rotary Jet Piercing Rotary Jet Piercing-Surface Only § 57.7805 Smoking and open flames. Persons shall not smoke and open flames shall not be used in the vicinity of the oxygen storage and supply lines. Signs...
30 CFR 57.7805 - Smoking and open flames.
Code of Federal Regulations, 2012 CFR
2012-07-01
... 30 Mineral Resources 1 2012-07-01 2012-07-01 false Smoking and open flames. 57.7805 Section 57... Rotary Jet Piercing Rotary Jet Piercing-Surface Only § 57.7805 Smoking and open flames. Persons shall not smoke and open flames shall not be used in the vicinity of the oxygen storage and supply lines. Signs...
30 CFR 57.7805 - Smoking and open flames.
Code of Federal Regulations, 2014 CFR
2014-07-01
... 30 Mineral Resources 1 2014-07-01 2014-07-01 false Smoking and open flames. 57.7805 Section 57... Rotary Jet Piercing Rotary Jet Piercing-Surface Only § 57.7805 Smoking and open flames. Persons shall not smoke and open flames shall not be used in the vicinity of the oxygen storage and supply lines. Signs...
30 CFR 57.7805 - Smoking and open flames.
Code of Federal Regulations, 2011 CFR
2011-07-01
... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Smoking and open flames. 57.7805 Section 57... Rotary Jet Piercing Rotary Jet Piercing-Surface Only § 57.7805 Smoking and open flames. Persons shall not smoke and open flames shall not be used in the vicinity of the oxygen storage and supply lines. Signs...
Pierce County High School: Excellence Is the Standard
ERIC Educational Resources Information Center
Principal Leadership, 2012
2012-01-01
This article features Pierce County High School in rural southeast Georgia whose 965 students, almost half of whom are from economically disadvantaged families, have demonstrated what a focus on student learning can accomplish. In 2004, the school ranked at the bottom of the state in students passing the high school graduation tests, and only 55%…
Ink and Holes: Correlates and Predictive Associations of Body Modification among Adolescents
ERIC Educational Resources Information Center
Dukes, Richard L.; Stein, Judith A.
2011-01-01
We examined correlates and predictive associations of tattoos and body piercings among 1,462 Colorado students in grades 9 to 12. More boys (19%) than girls (17%) reported tattoos, but more girls (42%) than boys (16%) reported piercings (earlobes not included). Older students reported more body modification. Structural equation models showed that…
Code of Federal Regulations, 2013 CFR
2013-07-01
... converter department uses Pierce-Smith converters, the capture system design must include use of a primary... discharged to the atmosphere from any Pierce-Smith converter primary hood capture system or Hoboken converter... construction commenced on or after April 20, 1998, the use of batch copper converters is prohibited. (f...
Code of Federal Regulations, 2012 CFR
2012-07-01
... converter department uses Pierce-Smith converters, the capture system design must include use of a primary... discharged to the atmosphere from any Pierce-Smith converter primary hood capture system or Hoboken converter... construction commenced on or after April 20, 1998, the use of batch copper converters is prohibited. (f...
Code of Federal Regulations, 2014 CFR
2014-07-01
... converter department uses Pierce-Smith converters, the capture system design must include use of a primary... discharged to the atmosphere from any Pierce-Smith converter primary hood capture system or Hoboken converter... construction commenced on or after April 20, 1998, the use of batch copper converters is prohibited. (f...
ERIC Educational Resources Information Center
Nelson, Steve; Clark, Robey
Comparing program objectives with program outcomes, 4 program components targeted at 1,100 American Indian students in 9 school districts in Pierce County, Washington were evaluated. Program objectives operationalized by an 11-member staff including 9 specialists and 1 coordinator were to develop: (1) basic skills via tutoring services for…
Triple inverter pierce oscillator circuit suitable for CMOS
Wessendorf,; Kurt, O [Albuquerque, NM
2007-02-27
An oscillator circuit is disclosed which can be formed using discrete field-effect transistors (FETs), or as a complementary metal-oxide-semiconductor (CMOS) integrated circuit. The oscillator circuit utilizes a Pierce oscillator design with three inverter stages connected in series. A feedback resistor provided in a feedback loop about a second inverter stage provides an almost ideal inverting transconductance thereby allowing high-Q operation at the resonator-controlled frequency while suppressing a parasitic oscillation frequency that is inherent in a Pierce configuration using a "standard" triple inverter for the sustaining amplifier. The oscillator circuit, which operates in a range of 10 50 MHz, has applications for use as a clock in a microprocessor and can also be used for sensor applications.
Sosin, Michael; Weissler, Jason M; Pulcrano, Marisa; Rodriguez, Eduardo D
2015-08-01
The purpose of this systematic review was to critically analyze infectious complications and treatment following transcartilaginous ear piercing. MEDLINE Pubmed database. A MEDLINE PubMed database search using free text, including "ear chondritis," "ear perichondritis," "ear cartilage piercing," and "auricle piercing," yielded 483 titles. Based on set inclusion and exclusion criteria, the titles, abstracts, and full text articles were reviewed for inclusion and underwent data extraction. Pooled outcomes are reported. A total of 29 articles met inclusion criteria, including 66 patients. The mean age of the patients was 18.7 ± 7.6 years (range: 11-49), 87.5% female. Ear deformity was more likely to occur following postpiercing perichondritis of the scapha 100% versus the helix 43% (P = 0.003). Mean duration of symptoms prior to patients seeking medical attention was 6.1 ± 4.1 days. Greater than 5 days of symptoms prior to seeking treatment was significantly more likely to result in hospitalization. Pseudomonas aeruginosa accounted for 87.2% infections. Of the patients with Pseudomonas, 92.3% were hospitalized versus 75% of the patients infected with Staphylococcus aureus. Initial oral antibiotics prescribed did not target the cultured bacterium in 53.3% of cases; of these, 87.5% were hospitalized. Transcartilaginous postpiercing infection may lead to ear deformity and hospitalization. Patients (customers) and practitioners must be aware of optimal treatment strategies to minimize associated morbidity. Scapha piercing and delay in presentation are associated with poorer outcomes. Pseudomonas is the most common bacterial infection. Initial antibiotic selection must be optimized accordingly. © 2015 The American Laryngological, Rhinological and Otological Society, Inc.
Prediction Of The Fracture Due To Mannesmann Effect In Tube Piercing
NASA Astrophysics Data System (ADS)
Fanini, S.; Ghiotti, A.; Bruschi, S.
2007-05-01
Mannesmann piercing process is a well-known hot rolling process used for seamless tube production. Its special feature is the so-called Mannesmann effect, that is the cavity formation in the center of the cylindrical billet and its propagation along the axis due to stress state caused by the rolls in the early stages of the process. The cavity is then expanded and sized in its internal diameter by an incoming plug. The industrial requirement is to know quite precisely the characteristics of the cavity especially in terms of its location along the billet axis in order to minimize the plug wear and the oxidation of the pierced bar. However, the scientific knowledge about the fracture mechanism leading to the Mannesmann effect is still limited, even if several theories have been proposed; this lack makes the design and optimization of the process through numerical simulations still a challenging task. The aim of this work is then to develop a suitably calibrated FE model of the piercing process in its first stage before the plug arrival, in order to investigate the Mannesmann effect using different damage criteria. Hot tensile tests, capable to reproduce the industrial conditions in terms of temperature, strain rate, and stress states, are carried out to investigate the material workability and to determine the parameters of the damage models on specimens machined from continuous-casting steel billets. The calculated parameters are implemented in the numerical model of the process and a sensitivity analysis to the different criteria is carried out, comparing numerical results with non-plug piercing tests conducted in the industrial plant.
ERIC Educational Resources Information Center
Bordelon, Suzanne
2006-01-01
In this article, the author demonstrated how recent histories relied primarily on previous accounts and one textbook to characterize George Pierce Baker's work. This narrow assessment of "The Principles of Argumentation" limits one's understanding of his contribution to argumentation theory and pedagogy. Similarly, one has seen the need for care…
ERIC Educational Resources Information Center
Mattern, Krista D.; Patterson, Brian F.
2013-01-01
Research on the predictive bias of cognitive tests has generally shown (a) no slope effects and (b) small intercept effects, typically favoring the minority group. Aguinis, Culpepper, and Pierce (2010) simulated data and demonstrated that statistical artifacts may have led to a lack of power to detect slope differences and an overestimate of the…
ERIC Educational Resources Information Center
Ryan, Richard M.; Deci, Edward L.
1996-01-01
The conclusion of J. Cameron and W. D. Pierce that rewards do not pose a threat to intrinsic motivation (1994) is a misrepresentation of the literature based on a flawed meta-analysis. Their analysis is more an attempt to defend behaviorist turf rather than meaningful consideration of relevant data and issues. (Author/SLD)
1985-06-11
3 Apr 85) 140 Saudi Defense Minister on Military Industrialization (Riyadh Domestic Service, 14 May 8^5) 150 Saudi Interior Minister on Drug ...influence and through cheating, collusion and bribery to conclude contracts with the public agencies, through smuggling and trafficking in drugs ...lethality radius of 5m and the M-433 HEAP (for High Explosive Armour Piercing) fragmentation round can pierce over 6cm of steel armour. Contraves
ERIC Educational Resources Information Center
Fernandez, Andrea M.
2014-01-01
The overt nature of racism in the United States has morphed into an insidious, covert manifestation called racial microaggression (Pierce, Carew, Pierce-Gonzalez, & Wills, 1978; Sue, Capodilupo, et al., 2007). Though not often intentional in nature, these microaggressive behaviors have become pervasive in the lives of people of color (Sue,…
Coutu, Diane L
2004-04-01
"It's worse than I thought.... She's completely lost her mind," says Harry Beecham, the CEO of blue chip management consultancy Pierce and Company. The perplexed executive was in a hotel suite with his wife in Amsterdam, the latest stop on his regular trek to dozens of Pierce offices worldwide. In his hand was a sheaf of paper--the same message sent over and over again by his star employee and protégée Katharina Waldburg. The end of the world is coming, she warned. "Someone is going to die." Harry wouldn't have expected this sort of behavior from Katharina. After graduating with distinction from Oxford, she made a name for herself by single-handedly building Pierce's organizational behavior practice. At 27, she's poised to become the youngest partner ever elected at the firm. But Harry can't ignore the faxes in his hand. Or the stream-of-consciousness e-mails Katharina's been sending to one of the directors in Pierce's Berlin office--mostly gibberish but potentially disastrous to Katharina's reputation if they ever got out. Harry also can't dismiss reports from Roland Fuoroli, manager of the Berlin office, of a vicious verbal exchange Katharina had with him, or of an "over the top" lunch date Katharina had with one of Pierce's clients in which she was explaining the alphabet's role in the creation of the universe. Harry is planning to talk to Katharina when he gets to Berlin. What should he say? And will it be too late? Four commentators offer their advice in this fictional case study. They are Kay Redfield Jamison, a professor of psychiatry and a coauthor of Manic-Depressive Illness; David E. Meen, a former director at McKinsey & Company; Norman Pearlstine, the editor in chief at Time Incorporated; and Richard Primus, an assistant law professor at the University of Michigan.
Phallic decoration in paleolithic art: genital scarification, piercing and tattoos.
Angulo, Javier C; García-Díez, Marcos; Martínez, Marc
2011-12-01
The primitive anthropological meaning of genital ornamentation is not clearly defined and the origin of penile intervention for decorative purposes is lost in time. Corporeal decoration was practiced in the Upper Paleolithic period. We discuss the existing evidence on the practice of phallic piercing, scarring and tattooing in prehistory. We studied the archaeological and artistic evidence regarding explicit genital male representations in portable art made in Europe approximately 38,000 to 11,000 years ago with special emphasis on decorations suggesting genital ornamentation. Archaeological evidence that has survived to our day includes 42 phallic pieces, of which 30 (71.4%) show intentional marks to a different extent with a probable decorative purpose. Of these ornamental elements 18 (60%) were recovered from the upper Magdalenian period (11,000 to 12,700 years ago) in France and Spain, and 23 (76.7%) belong to the category of perforated batons. Decorations show lines (70% of objects), plaques (26.7%), dots/holes (23.3%) or even human/animal forms (13.3%). These designs most probably represent skin scarification, cutting, piercing and tattooing. Notably there are some technical similarities between the motifs represented and some designs present in symbolic cave wall art. This evidence may show the anthropological origin of current male genital piercing and tattooing. European Paleolithic art shows decoration explicitly represented in a high proportion of portable art objects with a phallic form that have survived to our day. Decorative rituals of male genital tattooing, piercing and scarification may have been practiced during Paleolithic times. Copyright © 2011 American Urological Association Education and Research, Inc. Published by Elsevier Inc. All rights reserved.
Piercing and Tattoos in Adolescents: Legal and Medico-legal Implications.
Conti, Adelaide; Bin, Paola; Casella, Claudia; Capasso, Emanuele; Fedeli, Piergiorgio; Salzano, Francesco Antonio; Terracciano, Lucia; Piras, Mauro
2018-01-01
Non-therapeutic body modification interventions are permitted within the limits of the use of one's own body that can be specified in the legal system. The authors take into consideration Italian regulation on tattooing and piercing, in particular in relation to adolescents. In Italy, several regions have therefore issued acts aimed at regulating the activities of tattoo and piercing also in reference to minors. Discussion. With regard to minors, the rules taken into account set precise limits in relation to the age criterion and subordinate the implementation of such practices to the provision of consent by legal representatives. If such practices are of an aesthetic nature, we cannot avoid considering the implications they have on health protection, and then adopt appropriate measures to protect the person who intends to undergo them, particularly in the case of minors.
Characterization of Coatings on Steel Self-Piercing Rivets for Use with Magnesium Alloys
NASA Astrophysics Data System (ADS)
McCune, Robert C.; Forsmark, Joy H.; Upadhyay, Vinod; Battocchi, Dante
Incorporation of magnesium alloys in self-pierce rivet (SPR) joints poses several unique challenges among which are the creation of spurious galvanic cells and aggravated corrosion of adjacent magnesium when coated steel rivets are employed. This work firstly reviews efforts on development of coatings to steel fasteners for the diminution of galvanic corrosion when used with magnesium alloys. Secondly, approaches, based on several electrochemical methods, for the measurement of the galvanic-limiting effect of a number of commercially-available coatings to hardened 10B37 steel self-piercing rivets inserted into alloy couples incorporating several grades of magnesium are reported. Electrochemical impedance spectroscopy (EIS), zero-resistance ammeter (ZRA), corrosion potential and potential-mapping visualization methods (e.g. scanning vibrating electrode technique — SVET) are illustrated for the several rivet coatings considered.
["My body belongs to me"--cultural history and psychology of piercings and tattoos].
Stirn, A
2007-02-01
At present tattoos and piercings can no longer be regarded as destructive acts of self mutilation practized by fringe groups. Body modifications (BMs) are found in virtually all preindustrial cultures and have their roots in ancient myths and magical rituals. The prevalence of tattoos and piercings in the German population is 8.5% and 6.8%, respectively. Unemployed young men and young women who do not live in a firm partnership show particularly high prevalences. The incidence of BMs correlates positively with the personality trait "sensation seeking", particularly in young women. BMs often serve to express individuality and identity, and they also reflect changed attitude towards the human body and body art as well as following fashion trends. However, BMs can also provide valuable diagnostic indications for identity search and risk taking behaviour.
Cytotoxicity due to corrosion of ear piercing studs.
Rogero, S O; Higa, O Z; Saiki, M; Correa, O V; Costa, I
2000-12-01
It is well known that allergic and/or inflammatory reactions can be elicited from the use of gold-coated studs, particularly the type used for piercing ears, since they are left in contact with body fluids until the puncture heals. Inasmuch as gold is known as a non-toxic element, other elements of the substrate material may be responsible for some allergies. Therefore, characteristics of the coating, such as defects that expose the substrate to the human skin or body fluids, play an important role in the development of skin sensitization. In this study, the cytotoxicity of commercial studs used for ear piercing and laboratory-made studs was determined in a culture of mammalian cells. The corrosion performance of the studs was investigated by means of weight loss measurements and electrochemical impedance spectroscopy. The elements that leached out into the medium were also analysed by instrumental neutron activation analysis. Further, the surfaces of the studs were examined by scanning electron microscopy and analysed by energy dispersive spectroscopy to identify defects and reaction products on the surface, both before and after their exposure to the culture medium. The stud which showed lower corrosion performance resulted in higher cytotoxicity. Ti showed no cytotoxicity and high corrosion resistance, proving to be a potential material for the manufacture of ear piercing studs.
Aldrich, Thomas J; Rolshausen, Philippe E; Roper, M Caroline; Reader, Jordan M; Steinhaus, Matthew J; Rapicavoli, Jeannette; Vosburg, David A; Maloney, Katherine N
2015-08-01
The fastidious phytopathogenic bacterium, Xylella fastidiosa, poses a substantial threat to many economically important crops, causing devastating diseases including Pierce's Disease of grapevine. Grapevines (Vitis vinifera L.) planted in an area under Pierce's Disease pressure often display differences in disease severity and symptom expression, with apparently healthy vines growing alongside the dying ones, despite the fact that all the vines are genetic clones of one another. Under the hypothesis that endophytic microbes might be responsible for this non-genetic resistance to X. fastidiosa, endophytic fungi were isolated from vineyard cvs. 'Chardonnay' and 'Cabernet Sauvignon' grown under high Pierce's Disease pressure. A Cochliobolus sp. isolated from a Cabernet Sauvignon grapevine inhibited the growth of X. fastidiosa in vitro. Bioassay-guided isolation of an organic extract of Cochliobolus sp. yielded the natural product radicinin as the major active compound. Radicinin also inhibited proteases isolated from the culture supernatant of X. fastidiosa. In order to assess structure-activity relationships, three semi-synthetic derivatives of radicinin were prepared and tested for activity against X. fastidiosa in vitro. Assay results of these derivatives are consistent with enzyme inactivation by conjugate addition to carbon-10 of radicinin, as proposed previously. Copyright © 2015 Elsevier Ltd. All rights reserved.
Tattoos and Piercings: A Review for the Emergency Physician
Urdang, Michael; Mallek, Jennifer T; Mallon, William K
2011-01-01
Tattoos and piercings are increasingly part of everyday life for large sections of the population, and more emergency physicians are seeing these body modifications (BM) adorn their patients. In this review we elucidate the most common forms of these BMs, we describe how they may affect both the physical and psychological health of the patient undergoing treatment, and also try to educate around any potential pitfalls in treating associated complications. PMID:22224126
Effects of Waves on the Boundary Layer of a Surface-Piercing Body
1985-05-01
piercing bodies have been performed. Furthermore, all of these investigations have been of an approximate nature and none have properly accounted for...equation wall-turbulence model to account for the influence of the free surface. Lastly, in Section VII, a summary of the results from the present...requires V . In order to evaluate V correctly it was necessary to account for the grid nonorthogonality in the marching direction. Specifically, in
Creep, Plasticity, and Fatigue of Single Crystal Superalloy. (Preprint)
2011-07-01
existing approaches (Nissley et al . 1991, Cuitino and Ortiz M. 1993, C. Allen 1995) to increase the accuracy of elastic-visco-plastic material deformation...and higher, as shown in (Pierce et al 1983, Needleman 1988, Kalidindi and Anand, 1994) but this leads to stiff numerical equations with their...1980), Cassenti (1983), Pierce et al 1982, and Chaboche (1986). However, the rate-independent model should be free of limitations inherent in the rate
NCEL (Naval Civil Engineering Lab.) Ocean Platforms Seminar.
1983-11-01
propagating and evanescent modes. The resulting pressure field from both the scattered and radiated waves are integrated over the submerged surface of...fully submerged value. At the same time, an impact load occurs due to water entry of the member. Repeated loading of this type can result in fatigue...pronounced on deeply submerged caissons than on surface-piercing caissons. In the case of surface piercing caissons where the nonlinear effects tend to
Close Binary Star Speckle Interferometry on the McMath-Pierce 0.8-Meter Solar Telescope
NASA Astrophysics Data System (ADS)
Wiley, Edward; Harshaw, Richard; Jones, Gregory; Branston, Detrick; Boyce, Patrick; Rowe, David; Ridgely, John; Estrada, Reed; Genet, Russell
2015-09-01
Observations were made in April 2014 to assess the utility of the 0.8-meter solar telescope at the McMath-Pierce Solar Observatory at Kitt Peak National Observatory for performing speckle interferometry observations of close binary stars. Several configurations using science cameras, acquisition cameras, eyepieces, and flip mirrors were evaluated. Speckle images were obtained and recommendations for further improvement of the acquisition system are presented.
Piercing and Tattoos in Adolescents: Legal and Medico-legal Implications
Conti, Adelaide; Bin, Paola; Casella, Claudia; Capasso, Emanuele; Fedeli, Piergiorgio; Salzano, Francesco Antonio; Terracciano, Lucia; Piras, Mauro
2018-01-01
Abstract Non-therapeutic body modification interventions are permitted within the limits of the use of one’s own body that can be specified in the legal system. The authors take into consideration Italian regulation on tattooing and piercing, in particular in relation to adolescents. Results In Italy, several regions have therefore issued acts aimed at regulating the activities of tattoo and piercing also in reference to minors. Discussion. With regard to minors, the rules taken into account set precise limits in relation to the age criterion and subordinate the implementation of such practices to the provision of consent by legal representatives. Conclusion If such practices are of an aesthetic nature, we cannot avoid considering the implications they have on health protection, and then adopt appropriate measures to protect the person who intends to undergo them, particularly in the case of minors. PMID:29675481
Blanking and piercing theory, applications and recent experimental results
NASA Astrophysics Data System (ADS)
Zaid, Adnan l. O.
2014-06-01
Blanking and piercing are manufacturing processes by which certain geometrical shapes are sheared off a sheet metal. If the sheared off part is the one required, the processes referred to as blanking and if the remaining part in the sheet is the one required, the process is referred to as piercing. In this paper, the theory and practice of these processes are reviewed and discussed The main parameters affecting these processes are presented and discussed. These include: the radial clearance percentage, punch and die geometrical parameters, for example punch and die profile radii. The abovementioned parameters on the force and energy required to effect blanking together with their effect on the quality of the products are also presented and discussed. Recent experimental results together with photomacrographs and photomicrographs are also included and discussed. Finally, the effect of punch and die wear on the quality of the blanks is alsogiven and discussed.
Potential of the McMath-Pierce 1.6-Meter Solar Telescope for Speckle Interferometry
NASA Astrophysics Data System (ADS)
Harshaw, Richard; Jones, Gregory; Wiley, Edward; Boyce, Patrick; Branston, Detrick; Rowe, David; Genet, Russell
2015-09-01
We explored the aiming and tracking accuracy of the McMath-Pierce 1.6 m solar telescope at Kitt Peak National Observatory as part of an investigation of using this telescope for speckle interferometry of close visual double stars. Several slews of various lengths looked for hysteresis in the positioning system (we found none of significance) and concluded that the 1.6 m telescope would make a useful telescope for speckle interferometry.
Characteristics of adolescents who expressed indifference or no interest towards body art
2010-01-01
Background This study examines the underlying characteristics of adolescents attending Italian secondary school who expressed indifference towards or no interest at all in body art. Methods A convenience sample of 4,277 secondary school students from the North Eastern Italy were surveyed with a self-reported questionnaire collecting extensive socio-demographic information. Multivariable logistic regression analysis was employed to investigate the characteristics of those who were not interested or indifferent towards piercing and tattoo, reporting adjusted Odds Ratios (aOR) with a 95% confidence interval (CI). Results Prevalence of tattoo was 6%, whereas body piercing was 20%; 66% (= 558/840) of those with a piercing were underage (<18 years of age), the equivalent for tattoo being 62% (= 159/258). 166 individuals reported having both piercing and tattoo and 152 of these (92% = 152/166) were <18 years of age. The factors found to be predominately higher in those indifferent or who did not indicate interest in body art were: higher school year, increasing father's education and a greater perception of the associated health risks. Discussion Proactive health education campaigns by school educators and family physicians should focus on adolescents of less educated fathers and pupils less aware of the health risks associated with body art. In this respect junior secondary school students can be regarded as the ideal target of such campaigns. PMID:20942946
Natsis, K; Baraliakos, X; Appell, H J; Tsikaras, P; Gigis, I; Koebke, J
2006-05-01
The anatomical relationships of the greater occipital nerve (GON) to the semispinalis capitis muscle (SCM) and the trapezius muscle aponeurosis (TMA) were examined to identify topographic landmarks for use in anesthetic blockade of the GON in occipital neuralgia. The course and the diameter of the GON were studied in 40 cadavers (29 females, 11 males), and the points where it pierced the SCM and the TMA were identified. The course of the GON did not differ between males and females. A left-right difference was detected in the site of the GON in the TMA region but not in the SCM region. The nerve became wider towards the periphery. This may be relevant to entrapment of the nerve in the development of occipital neuralgia. In three cases, the GON split into two branches before piercing the TMA and reunited after having passed the TMA, and it pierced the obliquus capitis inferior muscle in another three cases. The GON and the lesser occipital nerve reunited at the level of the occiput in 80% of the specimens. The occiput and the nuchal midline are useful topographic landmarks to guide anesthetic blockade of the GON for diagnosis and therapy of occipital neuralgia. The infiltration is probably best aimed at the site where the SCM is pierced by the GON.
School of Advanced Military Studies Research Catalog AY 1983 - 1984 through 1991 - 1992
1992-01-01
Battalion Night Attack- Command and Con- trol System, Strengths and Weaknesses, ADA Pierce, Kerry K ., Major, EN, E-Force: How 179 280 Agile Is It?, ADA 179...Sturgeon, Douglas E., Major, MI, Gaining an Pierce, Kerry K ., Major, EN, Kursk: A Study Operational Advantage: The Interdiction of in Operational Art...Synchronization Ability of Division? try Division METL and are the Divisions ADA 225 464 Training to Accomplish Them? ADA 225 483 Major James K . Greer, The
Lane, R.C.; Julich, R.J.; Justin, G.B.
2013-01-01
Hydrographs of groundwater levels for selected wells in and adjacent to the Puyallup River watershed in Pierce and King Counties, Washington, are presented using an interactive Web-based map of the study area to illustrate changes in groundwater levels on a monthly and seasonal basis. The interactive map displays well locations that link to the hydrographs, which in turn link to the U.S. Geological Survey National Water Information System, Groundwater Site Inventory System.
Testing of the McMath-Pierce 0.8-Meter East Auxiliary Telescope's Acquisition and Slewing Accuracy
NASA Astrophysics Data System (ADS)
Harshaw, Richard; Ray, Jimmy; Prause, Lori; Douglass, David; Branston, Detrick; Genet, Russell M.
2015-09-01
Following mediocre results with pointing tests of the McMath-Pierce 0.8-meter East Auxiliary Telescope in April 2014, a team of astronomers/engineers met again in May 2014 to test other pointing models and assess the telescope's ability to point with enough accuracy to permit the efficient use of speckle interferometry. Results show that accurate collimation is a pre-requisite for such accuracy. Once attained, the telescope performs extremely well.
[Perceptions of healthcare providers toward body art: adornment or stigma?].
Caroni, Mariana Malheiros; Grossman, Eloisa
2012-04-01
Nowadays, body art is widespread, especially among adolescents. This qualitative study seeks to assess whether the use of body art interferes with how nursing assistants care for hospitalized adolescents and to identify factors that influence the perceptions of these health care providers. Nursing assistants working in an adolescent-specific ward were interviewed. After the analysis, dominant themes emerged from the narratives, allowing for a better understanding of how nursing assistants perceive tattoos and piercing. Some themes were recurrent, especially the association of body art with deviant behavior, erotic appeal, consumerism, courage, health risks, and psychic disorders. Religion and family values prevail over professional knowledge in how body marks are perceived. It may thus be inferred that a negative attitude toward body art is directly related to quality of care. The number of marks, their location, their type, and the definite/temporary character of tattoos and piercing interfere with the providers' interpretation. However, piercing and tattoos are important semiological tools and must be included in the script for the evaluation of adolescents.
DOE Office of Scientific and Technical Information (OSTI.GOV)
NONE
The Commencement Bay, South Tacoma Field site occupies 260 acres of land located in the southwestern section of the city of Tacoma in Pierce County, Washington. The South Tacoma Field site poses a public health hazard to trespassers who repeatedly ingest contaminated surface soils, surface water, and sediment during recreational activities at the site. Exposure to the contaminants arsenic, copper, lead, manganese, as well as polychlorinated biphenyl and polycyclic aromatic hydrocarbon compounds may have occurred in the past, may be presently occurring, and may occur in the future, which could result in noncarcinogenic and carcinogenic health effects. Potentially, the sitemore » can pose a public health hazard through exposure to groundwater and subsurface soil contaminants that could cause adverse health effects. Additionally, should contruction/excavation uncover contaminated subsurface soils, workers as well as recreationalists/trespassers may be exposed.« less
The Pierce-diode approximation to the single-emitter plasma diode
NASA Astrophysics Data System (ADS)
Ender, A. Ya.; Kuhn, S.; Kuznetsov, V. I.
2006-11-01
The possibility of modeling fast processes in the collisionless single-emitter plasma diode (Knudsen diode with surface ionization, KDSI) by means of the Pierce-diode is studied. The KDSI is of practical importance in that it is an almost exact model of thermionic energy converters (TICs) in the collisionless regime and can also be used to model low-density Q-machines. At high temperatures, the Knudsen TIC comes close to the efficiency of the Carnot cycle and hence is the most promising converter of thermal to electric energy. TICs can be applied as component parts in high-temperature electronics. It is shown that normalizations must be chosen appropriately in order to compare the plasma characteristics of the two models: the KDSI and the Pierce-diode. A linear eigenmode theory of the KDSI is developed. For both nonlinear time-independent states and linear eigenmodes without electron reflection, excellent agreement is found between the analytical potential distributions for the Pierce-diode and the corresponding numerical ones for the KDSI. For the states with electron reflection, the agreement is satisfactory in a qualitative sense. A full classification of states of both diodes for the regimes with and without electron reflection is presented. The effect of the thermal spread in electron velocities on the potential distributions and the (ɛ,η) diagrams is analyzed. Generally speaking, the methodology developed is usefully applicable to a variety of systems in which the electrons have beam-like distributions.
The Pierce-diode approximation to the single-emitter plasma diode
DOE Office of Scientific and Technical Information (OSTI.GOV)
Ender, A. Ya.; Kuhn, S.; Kuznetsov, V. I.
2006-11-15
The possibility of modeling fast processes in the collisionless single-emitter plasma diode (Knudsen diode with surface ionization, KDSI) by means of the Pierce-diode is studied. The KDSI is of practical importance in that it is an almost exact model of thermionic energy converters (TICs) in the collisionless regime and can also be used to model low-density Q-machines. At high temperatures, the Knudsen TIC comes close to the efficiency of the Carnot cycle and hence is the most promising converter of thermal to electric energy. TICs can be applied as component parts in high-temperature electronics. It is shown that normalizations mustmore » be chosen appropriately in order to compare the plasma characteristics of the two models: the KDSI and the Pierce-diode. A linear eigenmode theory of the KDSI is developed. For both nonlinear time-independent states and linear eigenmodes without electron reflection, excellent agreement is found between the analytical potential distributions for the Pierce-diode and the corresponding numerical ones for the KDSI. For the states with electron reflection, the agreement is satisfactory in a qualitative sense. A full classification of states of both diodes for the regimes with and without electron reflection is presented. The effect of the thermal spread in electron velocities on the potential distributions and the ({epsilon},{eta}) diagrams is analyzed. Generally speaking, the methodology developed is usefully applicable to a variety of systems in which the electrons have beam-like distributions.« less
DOE Office of Scientific and Technical Information (OSTI.GOV)
Mueller, Robert
2005-10-01
Pacific Northwest National Laboratory conducted video-based boat surveys to identify fall Chinook salmon (Oncorhynchus tshawytscha) spawning areas located in deep water (greater than 1 m) downstream of Bonneville Dam in fall 2004. This report documents the number and extent of Chinook salmon spawning near Ives and Pierce Islands of the Columbia River and is the sixth in a series of reports prepared since 1999. The main objectives of this study were to find deepwater spawning locations of fall Chinook salmon in the main Columbia River channel, collect additional data on physical habitat parameters at spawning sites, and provide estimates ofmore » adult spawners in the surveyed area. The primary search area was adjacent to the upper portion of Pierce Island, and the secondary search zone was downstream of this area near the lower portion of Pierce Island. A secondary objective was to document the occurrence of any chum salmon (O. keta) redds in the deeper sections downstream of Hamilton Creek (slough zone search area). Fall Chinook salmon redd numbers were down slightly from the record number found during 2003. The number of fall Chinook redds found in the Ives-Pierce Island complex (river km 228.5) during 2004 was 293, which does not include the number of shallow water redds found by visual observation by boat by the Oregon Department of Fish and Wildlife. The redds encompassed an area of 14.6 ha occurring adjacent to the lower part of Ives Island and Pierce Island. Peak spawning activity, based on redd counts and live fish seen near redds, was on or near November 16, 2004. An expanded redd count based on percentage video coverage in the primary and secondary search zones was 3,198 fall Chinook salmon redds at water depths exceeding approximately 1.0 m (approximately 125 kcfs) with an estimated spawning population of 10,800. Fall Chinook salmon redds were found at water depths from 1.07 to 7.6 m and were constructed predominantly of medium cobbles ranging in size from 7.6 to 15.2 cm in diameter. Near-bed water velocity readings taken in the secondary search ranged from 0.04 to 0.98 m/s (median 0.45 m/s). No chum salmon redds were found in a limited area within the relatively deeper sections of Hamilton Slough below Hamilton Creek. No additional salmon or chum redds were found in other areas searched, including near Woodward, Tanner, and McCord Creeks.« less
1949-08-24
t I- Results of Hardoed Survey* at Aberden Proving Ground an at Watertown Axue Average Average Surface Hardness...of surface hardness determination, made at Aberdeen ProvIng Ground and crocea-sectional hardness surveys made at Watertcwn Arsenal are limted in Table...Against 57 ma and, 90 w Armor-Piercing Ammunvtion,," At the request of this Arsenall,, Aerdeen Proving Ground provided 80 x 120" sections cut from a
2013-03-27
American politics, the Vietnam War.134 In a speech at the Junior College World Affairs Day at Pierce College in Los Angeles in May 1966, which was...Johnson 14 May 1966 Now-retired General Shoup gave anti-Vietnam speech at Pierce College, Los Angeles, California 20 March 1968 Testified at...out•tnnd).ng profo1!BlanAl ekl.ll that cuntrlllotto~ t!l\\I~O&oural> lo to tbs dofenee Of Icol.Jlnd. ~11th hie ~ltol•ao nffol’te,end unu<rual
Creutz, E.C.
1958-04-15
The manufacture of thin-walled uranium tubing by the hot-piercing techique is described. Uranium billets are preheated to a temperature above 780 d C. The heated billet is fed to a station where it is engaged on its external surface by three convex-surfaced rotating rollers which are set at an angle to the axis of the billet to produce a surface friction force in one direction to force the billet over a piercing mandrel. While being formed around the mandrel and before losing the desired shape, the tube thus formed is cooled by a water spray.
Assessment of Suicidal Behavior in a Psychiatric Emergency Room in Lisbon.
Marques, João Gama; Guerreiro, Diogo Frasquilho; Sampaio, Daniel
2015-01-01
Some studies alerted for the burden of suicidal attempters at emergency rooms. In this study we characterized the suicidal patients admitted to a Portuguese emergency room. For three years, all patients assessed by the first author after suicidal behaviour were included. Suicidal intentionality was evaluated with the Pierce Suicide Intent Scale. Clinical records were searched for follow-up status and satisfaction level was assessed through telephone call. From 120 included patients 70.8% were female, with mean age of 42.35 years. Pierce Suicide Intent Scale suicidal intentionality was low in 30.1%, medium in 59.3%, and high in 10.6% of the sample. The most important predictors of Pierce Suicide Intent Scale intentionality were male gender (p < 0.001), family history of suicide (p < 0.01), divorced or widowed marital status (p < 0.013), and severe mental illness (p < 0.015). In 41.6% of the patients the follow-up status was unknown. Regarding satisfaction, only 19.5% gave a valid answer: 2.7% 'mildly satisfied', 4.4% 'moderately satisfied', and 12.5% 'very satisfied'. The Pierce Suicide Intent Scale is useful on suicidal behavior assessment at emergency rooms. Highly intentional suicidal behaviour is related to male sex, social problems and personal and familial psychiatric history. The quality of administrative records on this psychiatric emergency room setting are still unacceptable. The most important variables correlated with higher suicidal intentionality are the same described in other countries. Of the reachable patients, one fifth was satisfied with provided follow-up. We still need studies for better understanding of suicidal behaviour observed on this Portuguese emergency room.
Mastin, M.C.; Le, Thanh
2001-01-01
The U.S. Geological Survey, in cooperation with Pierce County Department of Public Works, Washington, has developed an operational tool called the Puyallup Flood-Alert System to alert users of impending floods in the Puyallup River Basin. The system acquires and incorporates meteorological and hydrological data into the Streamflow Synthesis and Reservoir Regulation (SSARR) hydrologic flow-routing model to simulate floods in the Puyallup River Basin. SSARRMENU is the user-interactive graphical interface between the user, the input and output data, and the SSARR model. In a companion cooperative project with Pierce County, the SSARR model for the Puyallup River Basin was calibrated and validated. The calibrated model is accessed through SSARRMENU, which has been specifically programed for the Puyallup River and the needs of Pierce County. SSARRMENU automates the retrieval of data from ADAPS (Automated DAta Processing System, the U.S. Geological Survey?s real-time hydrologic database), formats the data for use with SSARR, initiates SSARR model runs, displays alerts for impending floods, and provides utilities to display the simulated and observed data. An on-screen map of the basin and a series of menu items provide the user wi
NASA Technical Reports Server (NTRS)
1985-01-01
When Feecon Corporation, a manufacturer of fire protection systems, needed a piercing nozzle for larger aircraft, they were assisted by Kennedy Space Center who provided the company with a fire extinguisher with a hard pointed tip that had been developed in case of an orbiter crash landing. The nozzle can penetrate metal skins of aircraft, trains, etc. Feecon obtained a license and now markets its cobra ram piercing nozzle to airport firefighters. Its primary advantage is that the nozzle can be held in one spot during repeated blows of the ram. *This product has been discontinued and is no longer commercially available.
Graphene can wreak havoc with cell membranes.
Dallavalle, Marco; Calvaresi, Matteo; Bottoni, Andrea; Melle-Franco, Manuel; Zerbetto, Francesco
2015-02-25
Molecular dynamics--coarse grained to the level of hydrophobic and hydrophilic interactions--shows that small hydrophobic graphene sheets pierce through the phospholipid membrane and navigate the double layer, intermediate size sheets pierce the membrane only if a suitable geometric orientation is met, and larger sheets lie mainly flat on the top of the bilayer where they wreak havoc with the membrane and create a patch of upturned phospholipids. The effect arises in order to maximize the interaction between hydrophobic moieties and is quantitatively explained in terms of flip-flops by the analysis of the simulations. Possible severe biological consequences are discussed.
Obituary: A. Keith Pierce, 1918 - 2005
NASA Astrophysics Data System (ADS)
Livingston, William Charles
2006-12-01
A. Keith Pierce was a solar astronomer who will be remembered for bringing the physics lab to the telescope and for his design of the world's largest solar telescope, the 1.5-meter McMath Telescope on Kitt Peak in Arizona. Born in Lincoln, Nebraska, he died of cancer in Tucson on 11 March 2005. He was eighty-six. His father, Tracy Pierce, had gone to graduate school in Berkeley, California, with a major in mathematics and a minor in astronomy. Fellow students of his class included Seth Nicholson and Donald Shane, people who were later to influence young Keith's life. Tracy Pierce received an appointment as an instructor, later Professor, of mathematics at the University of Nebraska in Lincoln. In his spare time dad Tracy became something of a telescope nut, following "the bible" —Albert Ingall's A.T.M (Amateur Telescope Making). His enthusiasm rubbed off on his son. Seth Nicholson, who became a famous Mt. Wilson Observatory astronomer, and Donald Shane from Berkeley, both stayed at the Pierce home while on their Sigma Xi lecture tours. After two years at Lincoln, followed by two more at Berkeley, Keith had earned his bachelor's degree in astronomy. During World War II, Dr. Shane became personnel director at the E.O. Lawrence Radiation Lab and arranged for Keith to work there at the cyclotron. A crash program to produce U235 from U238 was under way. At a crucial point in 1942 the cyclotron turned out the sought-after material. Much celebration ensued among the Rad Lab leaders. During this gala, Keith was on the night-shift and pretty much on his own. It was then that he turned a valve to the right, when left was called for, and the entire system went down. Shortly thereafter he was sent to Oak Ridge for the duration of the war. He cannot have been thought of badly, however, because he was invited to the Trinity test in New Mexico. (He didn't go because of the pending birth of his first son, John.) The year 1945 found Keith back in Berkeley working on his Ph.D. under Shane. After finishing this degree, Keith was brought by Leo Goldberg to the University of Michigan, Ann Arbor, and then to Lake Angelus, where his association with Robert McMath began. His prowess with instrumentation led to a mapping of the infrared solar spectrum with unprecedented accuracy. McMath, a Detroit engineer, had this dream of building a large solar telescope at a suitable elevated and dry location. Through friends in Washington (viz. the Director of the Bureau of the Budget), he found funds to construct this telescope under the guidance of Keith Pierce. Kitt Peak National Observatory was an ancillary result. The above is a distillation of an interview with Keith regarding his career on the occasion in 1992 of the re-dedication of the McMath-Pierce Solar Facility. I would add that Keith carried out seminal work on the solar spectrum. These include "The Chromospheric Spectrum Outside Eclipse, ?? 3040-9266," with Jim Breckenridge, "The Kitt Peak Table of Photographic Solar Spectrum Wavelengths," and with Charles Slaughter, "Solar Limb Darkening, I and II." For sixteen years, Keith directed the Solar Program of KPNO with a gentle hand. At home with his first wife, Mildred, and later with his second, Trudy, he extended warm hospitality to visitors from around the world. He leaves three children: John (deceased), Barbara Isabel Orville, and Willard Ross.
2011-01-01
Background Body art practices have emerged as common activities among youth, yet few studies have investigated awareness in different age groups of possible health complications associated with piercing and tattooing. Methods We investigated perceptions of and knowledge about health risks. To highlight differences among age groups, we gathered data from students at high schools and universities in the province of Naples. Results Of 9,322 adolescents, 31.3% were pierced and 11.3% were tattooed. Of 3,610 undergraduates, 33% were pierced and 24.5% were tattooed (p < 0.05). A higher number of females were pierced in both samples, but there were no gender differences among tattooed students. Among high school students, 79.4% knew about infectious risks and 46% about non-infectious risks; the respective numbers among university students were 87.2% and 59.1%. Only 3.5% of students in high school and 15% of university undergraduates acknowledged the risk of viral disease transmission; 2% and 3% knew about allergic risks. Among adolescents and young adults, 6.9% and 15.3%, respectively, provided signed informed consent; the former were less knowledgeable about health risks (24.7% vs. 57.1%) (p < 0.05). Seventy-three percent of the high school students and 33.5% of the university students had body art done at unauthorized facilities. Approximately 7% of both samples reported complications from their purchased body art. Conclusions Results indicate a need for adequate information on health risks associated with body art among students in Naples, mainly among high school students. Therefore, adolescents should be targeted for public health education programs. PMID:21819558
Suitability of selected free-gas and dissolved-gas sampling containers for carbon isotopic analysis.
Eby, P; Gibson, J J; Yi, Y
2015-07-15
Storage trials were conducted for 2 to 3 months using a hydrocarbon and carbon dioxide gas mixture with known carbon isotopic composition to simulate typical hold times for gas samples prior to isotopic analysis. A range of containers (both pierced and unpierced) was periodically sampled to test for δ(13)C isotopic fractionation. Seventeen containers were tested for free-gas storage (20°C, 1 atm pressure) and 7 containers were tested for dissolved-gas storage, the latter prepared by bubbling free gas through tap water until saturated (20°C, 1 atm) and then preserved to avoid biological activity by acidifying to pH 2 with phosphoric acid and stored in the dark at 5°C. Samples were extracted using valves or by piercing septa, and then introduced into an isotope ratio mass spectrometer for compound-specific δ(13)C measurements. For free gas, stainless steel canisters and crimp-top glass serum bottles with butyl septa were most effective at preventing isotopic fractionation (pierced and unpierced), whereas silicone and PTFE-butyl septa allowed significant isotopic fractionation. FlexFoil and Tedlar bags were found to be effective only for storage of up to 1 month. For dissolved gas, crimp-top glass serum bottles with butyl septa were again effective, whereas silicone and PTFE-butyl were not. FlexFoil bags were reliable for up to 2 months. Our results suggest a range of preferred containers as well as several that did not perform very well for isotopic analysis. Overall, the results help establish better QA/QC procedures to avoid isotopic fractionation when storing environmental gas samples. Recommended containers for air transportation include steel canisters and glass serum bottles with butyl septa (pierced and unpierced). Copyright © 2015 John Wiley & Sons, Ltd.
Zhang, Lu; Oh, Youngjoo; Li, Hongyu; Baldwin, Ian T.; Galis, Ivan
2012-01-01
The role of the alternative respiratory pathway in the protection of plants against biotic stress was examined in transgenic tobacco (Nicotiana attenuata) plants (irAOX) silenced in the expression of ALTERNATIVE OXIDASE (AOX) gene. Wild-type and irAOX plants were independently challenged with (1) chewing herbivores (Manduca sexta), (2) piercing-sucking insects (Empoasca spp.), and (3) bacterial pathogens (Pseudomonas syringae pv tomato DC3000), showing that all these treatments can strongly elicit accumulation of AOX gene transcripts in wild-type plants. When N. attenuata chemical defenses and resistance were examined, irAOX plants showed wild-type levels of defense-related phytohormones, secondary metabolites, and resistance to M. sexta. In contrast, piercing-sucking leafhoppers (Empoasca spp.) caused more leaf damage and induced significantly higher salicylic acid levels in irAOX compared with wild-type plants in the field and/or glasshouse. Subsequently, irAOX plants accumulated lower levels of defense metabolites, 17-hydroxygeranyllinalool diterpene glycosides, caffeoylputrescine, and nicotine compared with wild-type plants under prolonged attack of Empoasca spp. in the glasshouse. Finally, an accelerated cell death phenotype was observed in irAOX plants infected with P. syringae, which correlated with higher levels of salicylic acid and hydrogen peroxide levels in pathogen-infected irAOX compared with wild-type leaves. Overall, the AOX-associated changes in phytohormone and/or redox levels appear to support the resistance of N. attenuata plants against cell piercing-sucking insects and modulate the progression of cell death in pathogen-infected tissues but are not effective against rapidly feeding specialist herbivore M. sexta. PMID:22961128
Compositions and Methods for the Treatment of Pierce's Disease
Gupta, Goutam
2008-10-07
Chimeric anti-microbial proteins, compositions, and methods for the therapeutic and prophylactic treatment of plant diseases caused by the bacterial pathogen Xylella fastidiosa are provided. The anti-microbial proteins of the invention generally comprise a surface recognition domain polypeptide, capable of binding to a bacterial membrane component, fused to a bacterial lysis domain polypeptide, capable of affecting lysis or rupture of the bacterial membrane, typically via a fused polypeptide linker. In particular, methods and compositions for the treatment or prevention of Pierce's disease of grapevines are provided. Methods for the generation of transgenic Vitus vinefera plants expressing xylem-secreted anti-microbial chimeras are also provided.
Piercing mandrel strengthening by surfacing with nickel aluminide-based alloy
NASA Astrophysics Data System (ADS)
Zorin, I. V.; Dubtsov, Yu N.; Sokolov, G. N.; Artem'ev, A. A.; Lysak, V. I.; Elsukov, S. N.
2017-02-01
Electrode composite wire (CW) was used for argon-arc surfacing of a thermal-resisting nickel aluminide-based alloy (Ni-Al-Cr-W-Mo-Ta system) on the butt-end surface of the non-water-cooled piercing mandrel. It was shown that multipassing surfacing forms a defect-free deposited metal based on the γ’-Ni3Al phase of various structural origins. Using high-temperature sclerometry and thermal fatigue testing methods, the metal deposited with CW containing ultrafine particle of 0.3-0.4 % wt. WC carbide features increased resistance to thermal and force effects at temperatures up to 1200 °C.
Uckun, F M; Frankel, A
1993-02-01
The Third International Symposium on Immunotoxins was held on June 19-21, 1992 in Orlando, Florida. This symposium was sponsored by NATO, NIH, Pierce Chemical Company, Walt Disney Cancer Institute at Florida Hospital, Duke Comprehensive Cancer Center, Xoma, Immunogen, Seragen, Bristol-Myers Squibb, Chiron, Ortho Biotech, Upjohn, Merck Sharp & Dohme Research Laboratories, Abbot Laboratories, Lilly Research Laboratories, and Evans & Sutherland. The Pierce Immunotoxin Award which recognizes outstanding contributions to immunotoxin research and development, was presented to Drs David FitzGerald, Fatih Uckun, David Eisenberg, and Ira Wool, for their contributions to the immunotoxin field.
The incidence of coring with blunt versus sharp needles.
Wani, Tariq; Wadhwa, Anupama; Tobias, Joseph D
2014-03-01
With the advent of safety needles to prevent inadvertent needle sticks in the operating room (OR), a potentially new issue has arisen. These needles may result in coring, or the shaving off of fragments of the rubber stopper, when the needle is pierced through the rubber stopper of the medication vial. These fragments may be left in the vial and then drawn up with the medication and possibly injected into patients. The current study prospectively evaluated the incidence of coring when blunt and sharp needles were used to pierce rubber topped vials. We also evaluated the incidence of coring in empty medication vials with rubber tops. The rubber caps were then pierced with either an18-gauge sharp hypodermic needle or a blunt plastic (safety) needle. Coring occurred in 102 of 250 (40.8%) vials when a blunt needle was used versus 9 of 215 (4.2%) vials with a sharp needle (P < 0.0001). A significant incidence of coring was demonstrated when a blunt plastic safety needle was used. This situation is potentially a patient safety hazard and methods to eliminate this problem are needed. Copyright © 2014 Elsevier Inc. All rights reserved.
Nickel on the Swedish market. Follow-up after implementation of the Nickel Directive.
Lidén, Carola; Norberg, Kristina
2005-01-01
The Nickel Directive aims at the prevention of sensitization and elicitation of nickel dermatitis. It limits nickel release from, and nickel content in, certain items. The Directive came into full force by July 2001. The aim of this study was to investigate the frequency on the market of items that release nickel and of nickel content in piercing posts, 2 years after coming into force of the Directive. Of special interest was to study changes compared to the situation in 1999, when a baseline study had been carried out. Nickel release from 786 items covered by the Nickel Directive was tested with the dimethylglyoxime (DMG) test, and nickel content in 18 piercing posts was analysed. Nickel release was shown from 8% of items intended for direct and prolonged contact with the skin, and 17% of the piercing posts contained too much nickel, a decrease compared to 1999. There has been significant adaptation to the requirements of the Nickel Directive. The DMG test is useful for screening for nickel release and for monitoring the market. Provided there is further adaptation to the requirements, the risk of sensitization and elicitation of nickel dermatitis will be significantly reduced.
A 120kV IGBT modulator for driving a pierce electron gun
DOE Office of Scientific and Technical Information (OSTI.GOV)
Earley, L. M.; Brown, R. W.; Carlson, R. L.
2004-01-01
An IGBT modulator has been developed to drive a 120 kV, 23 A Pierce electron gun. The modulator is capable of producing pulses up to 10 {mu}s in width at repetition rates up to 10Hz with no active reset. The pulse rise time on the electron gun will be approximately 2 {mu}s and the remaining 8 {mu}s of flattop is tuned to have a ripple of less than 1 percent rms. The modulator technology was developed from a previous 50 kV prototype. The modulator consists of six boards, each with one EUPEC IGBT that drives a single common step-up transformermore » wound on METGLAS 2605SC cores. The six transformer cores share a common bi-filar output secondary winding. The modulator uses a fiber optic trigger system and has a high voltage cable output with an epoxy receptacle on the oil end and a ceramic receptacle on the vacuum end. The 120 kV electron gun was manufactured by MDS Co. and will be used to generate sheet electron beams from the standard pencil beam produced by the Pierce electron gun.« less
Cnidarian internal stinging mechanism
Schlesinger, Ami; Zlotkin, Eliahu; Kramarsky-Winter, Esti; Loya, Y.
2008-01-01
Stinging mechanisms generally deliver venomous compounds to external targets. However, nematocysts, the microscopic stinging organelles that are common to all members of the phylum Cnidaria, occur and act in both external and internal tissue structures. This is the first report of such an internal piercing mechanism. This mechanism identifies prey items within the body cavity of the sea anemone and actively injects them with cytolytic venom compounds. Internal tissues isolated from sea anemones caused the degradation of live Artemia salina nauplii in vitro. When examined, the nauplii were found to be pierced by discharged nematocysts. This phenomenon is suggested to aid digestive phagocytic processes in a predator otherwise lacking the means to masticate its prey. PMID:19129118
[An unusual autoerotic accident: sexual pleasure from peritoneal pain].
Schmeling, A; Correns, A; Geserick, G
2001-01-01
The paper describes a fatal autoerotic accident of a 23-year-old man who derived sexual pleasure from painful irritation of the peritoneum by sharp force. For this purpose he clamped two knife blades into a vice suspended from a rope-pulley construction so that he could lower it to pierce the abdominal skin with the tips of the knives. When one of the ropes broke, the vice with the knives fell onto the man's belly piercing the inferior vena cava and leading to death by exsanguination. This, to the authors' knowledge, has been the first ever report of a fatal autoerotic accident in which sexual pleasure was to be obtained from painful irritation of the peritoneum.
Transforming the Cross Cultural Collaborative of Pierce County Through Assessment Capacity Building
Garza, Mary A.; Abatemarco, Diane J.; Gizzi, Cindan; Abegglen, Lynn M.; Johnson-Conley, Christina
2010-01-01
Background Underserved populations are underrepresented in public health initiatives such as tobacco control and in cancer clinical trials. Community involvement is crucial to interventions aimed at reducing health disparities, and local health departments increasingly are called upon to provide both leadership and funding. The Tacoma Pierce County Health Department (TPCHD), in conjunction with 13 key community-based organizations and healthcare systems, formed the Cross Cultural Collaborative of Pierce County (CCC) that successfully employs needs-assessment and evaluation techniques to identify community health initiatives. Methods Community leaders from six underserved populations of the CCC were trained in needs-assessments techniques. Assessments measured effectiveness of the collaborative process and community health initiatives by using key informant (n = 18) and group interviews (n = 3). Results The CCC, facilitated by its partnership with the TPCHD, built capacity and competence across community groups to successfully obtain two funded public health initiatives for six priority populations. Members expressed overall satisfaction with the training, organizational structure, and leadership. The CCC’s diversity, cultural competency, and sharing of resources were viewed both as a strength and a decision-making challenge. Conclusion Public health department leadership, collaboration, and evidence-based assessment and evaluation were key to demonstrating effectiveness of the interventions, ensuring the CCC’s sustainability. PMID:19077598
Mirilas, Petros
2011-09-01
"Stepladder" surgery for fistula from second or third pharyngeal cleft and pouch is "blind." Neither intraoperative methylene blue injection and probing nor preoperative imaging (fistulogram ultrasound, computed tomography, magnetic resonance imaging) reveal three-dimensional anatomic relations of fistulas. This article describes the most common second and third fistula courses and demonstrates representation of their tracts with wires in human cadavers. A second cleft and pouch fistula, at its external opening, pierces superficial cervical fascia (and platysma), then investing cervical fascia, and travels under the sternocleidomastoid muscle, superficial to the sternohyoid and anterior belly of omohyoid. It ascends along the carotid sheath, and at the upper border of the thyroid cartilage it pierces the pretracheal fascia. Characteristically, it courses between the carotid bifurcation and over the hypoglossal nerve. After passing beneath the posterior belly of the digastric muscle and the stylohyoid, it hooks around both glossopharyngeal nerve and stylopharyngeus muscle. The fistula reaches the pharynx below the superior constrictor muscle. The course of a third cleft and pouch fistula is similar until it has pierced pretracheal fascia; then it passes over the hypoglossal nerve and behind the internal carotid, finally descending parallel to the superior laryngeal nerve, reaching the thyrohyoid membrane cranial to the nerve.
Asami, Tetsu; Kaneko, Hiroki; Miyake, Kensaku; Ota, Ichiro; Miyake, Goichiro; Kato, Seiichi; Yasuda, Shunsuke; Iwase, Takeshi; Ito, Yasuki; Terasaki, Hiroko
2016-01-01
Purpose We report a newly developed device to fragment thrombi in retinal vein occlusion. Methods The new instrument consists of a 23-gauge (G) pipe and a 37-G needle with an internal wire. A total of 40 porcine eyes were used; 20 eyes for experiments in the branch retinal vein (BRV group) and 20 eyes for experiments in the central retinal vein (CRV group). We placed 25-G 3-port trocars, and core vitrectomy was performed. Another 23-G scleral incision was performed for insertion of the needle. The needle pierced the retinal vein at a distance of three- to four- or one-disc diameters from the optic disc (BRV or CRV group, respectively), and the internal wire was advanced toward the disc. The success rates of needle piercing and cannulation of the internal wire were recorded in each group. In the CRV group, the cannulation was deemed successful when the tip reached inside the optic disc. Real-time optical coherence tomography imaging also was performed using the Zeiss Rescan 700 device in porcine eyes. Histologic examination of the retinal vessel inserted with the internal wire was performed. Results The success rates of needle piercing into the BRV and CRV were 85% and 95%, respectively. The success rates of cannulation of the internal wire into the BRV and CRV were 85% and 0%, respectively. The process of cannulation was recorded successfully with the Rescan 700. Histologic examination showed no damages to the endothelial cell layer. Conclusions The needle and internal wire intended to be used for recanalization of BRV occlusion were successfully pierced and cannulated into the BRV. Translational Relevance This newly developed device could become a treatment modality for retinal vein occlusion to fragment thrombi that present treatment methods cannot reach and remove directly. PMID:27730009
Body modification and substance use in adolescents: is there a link?
Brooks, Traci L; Woods, Elizabeth R; Knight, John R; Shrier, Lydia A
2003-01-01
To describe the characteristics of body modification among adolescents and to determine whether adolescents who engage in body modification are more likely to screen positive for alcohol and other drug problems than those who do not. Adolescents aged 14 to 18 years presenting to an urban adolescent clinic for routine health care completed a questionnaire about body modification and a substance use assessment battery that included the 17-item Problem Oriented Screening Instrument for Teenagers Alcohol/Drug Use and Abuse Scale (POSIT-ADS). Body modification was defined as piercings (other than one pair of bilateral earlobe piercings in females), tattoos, scarification, and branding. Problem substance use was defined as a POSIT-ADS score > or =1. Data were analyzed using logistic regression to determine whether the presence of body modification was an independent predictor of problem substance use. The 210 participants had a mean (+/- SD) age of 16.0 (+/- 1.4) years and 63% were female. One hundred adolescents (48%) reported at least one body modification; girls were more likely than boys to have body modification (59% vs. 28%, p < or = .0005). Ninety (42%) reported piercings, 22 (10%) tattoos, 9 (4%) scarification, and 1 (< 1%) branding; 21 (10%) had more than one type of body modification. These were in a variety of locations, most commonly the ear and the nose (piercings) or the extremities (tattoos). One-third of the sample (33%) screened positive for problem substance use on the POSIT-ADS questionnaire. Controlling for age, adolescents with body modification had 3.1 times greater odds of problem substance use than those without body modification (95% CI 1.7, 5.8). Body modification was associated with self-reported problem alcohol and other drug use among middle adolescents presenting for primary care. More research is needed to determine the clinical and sociocultural significance of body modification and its relationship to substance use in this population. Copyright Society for Adolescent Medicine, 2003
Possible Problems: Inverted, Flat, or Pierced Nipples
... Healthy Living Healthy Living Healthy Living Nutrition Fitness Sports Oral Health Emotional Wellness Growing Healthy Sleep Safety & Prevention Safety & Prevention Safety and Prevention Immunizations ...
Biparametric equilibria bifurcations of the Pierce diode: A one-dimensional plasma-filled device
DOE Office of Scientific and Technical Information (OSTI.GOV)
Terra, Maisa O.
2011-03-15
The equilibria bifurcations of the biparametric version of the classical Pierce diode, a one-dimensional plasma-filled device, are analyzed in detail. Our investigation reveals that this spatiotemporal model is not structurally stable in relation to a second control parameter, the ratio of the plasma ion density to the injected electron beam density. For the first time, we relate the existence of one-fluid chaotic regions with specific biparametric equilibria bifurcations, identifying the restricted regions in the parametric plane where they occur. We show that the system presents several biparametric scenarios involving codimension-two transcritical bifurcations. Finally, we provide the spatial profile of themore » stable and unstable one-fluid equilibria in order to describe their metamorphoses.« less
C.-E.A. Winslow Day: Proceedings of the June 3, 1977 Centenary Celebration
Viseltear, Arthur J.
1977-01-01
Sponsored by Yale University, the City of New Haven, and the John B. Pierce Foundation, the C.-E.A. Winslow Day program consisted of speeches by Mr. Leonard Woodcock, President Emeritus, U.A.W., the Honorable Kenneth Gibson, Mayor of Newark, and Dr. Hector Acuña, Director, Pan American Health Organization; reminiscences of Ira Hiscock, Anna M.R. Lauder Professor Emeritus of Public Health, Mary Elizabeth Tennant, Associate Professor Emeritus of Nursing (Public Health), A. Pharo Gagge, Emeritus Fellow, John B. Pierce Foundation, and Mrs. Harriet Welch, Former President of the VNA of New Haven. The proceedings also included the presentation of gifts and the official C.-E.A. Winslow Day Proclamation. PMID:345631
Development Relationship Building Research Interests Solar Energy Wind Technology Education Pierce College - Woodland Hills, CA Commercial and Advertising Art Prior Work Experience UCHealth - Northern Colorado Region
Rethinking Innovation: Disruptive Technology and Strategic Response
2005-04-01
Computer News, a magazine on public sector information technology. Pierce teaches classes at the Naval Postgraduate School and recently authored Warfighting and Disruptive Technologies : Disguising Innovation.
75 FR 22873 - Nebraska Disaster # NE-00035
Federal Register 2010, 2011, 2012, 2013, 2014
2010-04-30
..., Madison, Nance, Nemaha, Nuckolls, Otoe, Pawnee, Pierce, Platte, Polk, Richardson, Saline, Seward, Stanton... of Federal Domestic Assistance Numbers 59002 and 59008) James E. Rivera, Associate Administrator for...
Multi-stage FE simulation of hot ring rolling
NASA Astrophysics Data System (ADS)
Wang, C.; Geijselaers, H. J. M.; van den Boogaard, A. H.
2013-05-01
As a unique and important member of the metal forming family, ring rolling provides a cost effective process route to manufacture seamless rings. Applications of ring rolling cover a wide range of products in aerospace, automotive and civil engineering industries [1]. Above the recrystallization temperature of the material, hot ring rolling begins with the upsetting of the billet cut from raw stock. Next a punch pierces the hot upset billet to form a hole through the billet. This billet, referred to as preform, is then rolled by the ring rolling mill. For an accurate simulation of hot ring rolling, it is crucial to include the deformations, stresses and strains from the upsetting and piercing process as initial conditions for the rolling stage. In this work, multi-stage FE simulations of hot ring rolling process were performed by mapping the local deformation state of the workpiece from one step to the next one. The simulations of upsetting and piercing stages were carried out by 2D axisymmetric models using adaptive remeshing and element erosion. The workpiece for the ring rolling stage was subsequently obtained after performing a 2D to 3D mapping. The commercial FE package LS-DYNA was used for the study and user defined subroutines were implemented to complete the control algorithm. The simulation results were analyzed and also compared with those from the single-stage FE model of hot ring rolling.
Yoshizawa, Kazunori; Lienhard, Charles
2016-02-11
The diversity of feeding apparatuses in insects far exceeds that observed in any other animal group. Consequently, tracking mouthpart innovation in insects is one of the keys toward understanding their diversification. In hemipteroid insects (clade Paraneoptera or Acercaria: lice, thrips, aphids, cicadas, bugs, etc.), the transition from chewing to piercing-and-sucking mouthparts is widely regarded as the turning point that enabled hyperdiversification of the Hemiptera, the fifth largest insect order. However, the transitional process from chewing to piercing-and-sucking in the Paraneoptera was hitherto completely unknown. In this paper, we report a well preserved mid Cretaceous amber fossil of the paraneopteran insect family Archipsyllidae and describe it as Mydiognathus eviohlhoffae gen. et sp. n. This species has elongate mandibles and styliform laciniae similar to Hemiptera but retains functional chewing mouthparts. A number of morphological characters place the Archipsyllidae as the sister group of the thrips plus hemipterans, which strongly suggests that the mouthparts of M. eviohlhoffae represent a transitional condition from primitive chewing to derived piercing-and-sucking mouthparts. The clade composed of Archipsyllidae, thrips, and hemipterans is here named Pancondylognatha, a new supra-ordinal taxon. Based on newly obtained information, we also assess the monophyly of the Paraneoptera, which was called into question by recent phylogenomic analyses. A phylogenetic analysis that includes Mydiognathus strongly supports the monophyly of the Paraneoptera.
Body-art practices among undergraduate medical university students in dar es salaam, Tanzania, 2014.
Chacha, Chacha Emmanuel; Kazaura, Method R
2015-01-01
Body-art practices are increasing among adolescents and young adults. Although substantial data are available in developed countries, little has been documented about body-art practices in developing countries. To determine the magnitude, types and reasons for practicing body-art practices among undergraduate medical University students in Dar es Salaam, Tanzania. A cross-sectional descriptive study was conducteed among undergraduate University students in Dar es Salaam involving 536 respondents from two Universities. We used a self-administered questionnaire to collect data. Analyses were based on summary measures and bivariate analyses. While 7.5% of undergraduate students reported having tattoos, 20% reported having body puncturing or piercing. Body piercing is reported more among female university undergraduate students than their male counterparts. Reported main reasons for undergoing body-art include "a mark of beauty," 24%, "just wanted one," 18% and "a mark of femininity or masculinity," 17%. The majority (98%) of students were aware that unsafe body-art practices may lead to contracting HIV and more than half (52%) reported awareness of the risk of Hepatitis B infection. Despite high awareness of the potential risks involved in unsafe body arts that include tattoo and piercing, these practices are increasing among adolescents and young adults. There is need to have educational and counseling efforts so as to minimize associated health risks.
NASA Astrophysics Data System (ADS)
Harwood, Casey; Young, Yin Lu; Ceccio, Steven
2014-11-01
High-lift devices that operate at or near a fluid free surface (such as surface-piercing or shallowly-submerged propellers and hydrofoils) are prone to a multiphase flow phenomenon called ventilation, wherein non-condensable gas is entrained in the low-pressure flow, forming a cavity around the body and dramatically altering the global hydrodynamic forces. Experiments are being conducted at the University of Michigan's towing tank using a canonical surface-piercing strut to investigate atmospheric ventilation. The goals of the work are (i) to gain an understanding of the dominant physics in fully wetted, partially ventilated, and fully ventilated flow regimes, (ii) to quantify the effects of governing dimensionless parameters on the transition between flow regimes, and (iii) to develop scaling relations for the transition between flow regimes. Using theoretical arguments and flow visualization techniques, new criteria are developed for classifying flow regimes and transition mechanisms. Unsteady transition mechanisms are described and mapped as functions of the governing non-dimensional parameters. A theoretical scaling relationship is developed for ventilation washout, which is shown to adequately capture the experimentally-observed washout boundary. This material is based upon work supported by the National Science Foundation Graduate Student Research Fellowship under Grant No. DGE 1256260. Support also comes from the Naval Engineering Education Center (Award No. N65540-10-C-003).
Azizi, Armaghan; Arora, Arinder; Markiv, Anatoliy; Lampe, David J.; Miller, Thomas A.
2012-01-01
Pierce's disease is a devastating lethal disease of Vitus vinifera grapevines caused by the bacterium Xylella fastidiosa. There is no cure for Pierce's disease, and control is achieved predominantly by suppressing transmission of the glassy-winged sharpshooter insect vector. We present a simple robust approach for the generation of panels of recombinant single-chain antibodies against the surface-exposed elements of X. fastidiosa that may have potential use in diagnosis and/or disease transmission blocking studies. In vitro combinatorial antibody ribosome display libraries were assembled from immunoglobulin transcripts rescued from the spleens of mice immunized with heat-killed X. fastidiosa. The libraries were used in a single round of selection against an outer membrane protein, MopB, resulting in the isolation of a panel of recombinant antibodies. The potential use of selected anti-MopB antibodies was demonstrated by the successful application of the 4XfMopB3 antibody in an enzyme-linked immunosorbent assay (ELISA), a Western blot assay, and an immunofluorescence assay (IFA). These immortalized in vitro recombinant single-chain antibody libraries generated against heat-killed X. fastidiosa are a resource for the Pierce's disease research community that may be readily accessed for the isolation of antibodies against a plethora of X. fastidiosa surface-exposed antigenic molecules. PMID:22327580
Choi, Hong-Kyu; Iandolino, Alberto; da Silva, Francisco Goes; Cook, Douglas R
2013-06-01
Pierce's disease, caused by the bacterium Xylella fastidiosa, is one of the most devastating diseases of cultivated grape, currently restricted to the Americas. To test the long-standing hypothesis that Pierce's disease results from pathogen-induced drought stress, we used the Affymetrix Vitis GeneChip to compare the transcriptional response of Vitis vinifera to Xylella infection, water deficit, or a combination of the two stresses. The results reveal a redirection of gene transcription involving 822 genes with a minimum twofold change (P < 0.05), including the upregulation of transcripts for phenylpropanoid and flavonoid biosynthesis, pathogenesis-related proteins, abscisic acid- and jasmonic acid-responsive biosynthesis, and downregulation of transcripts related to photosynthesis, growth, and nutrition. Although the transcriptional response of plants to Xylella infection was largely distinct from the response of healthy plants to water stress, we find that 138 of the pathogen-induced genes exhibited a significantly stronger transcriptional response when plants were simultaneously exposed to infection and drought stress, suggesting a strong interaction between disease and water deficit. This interaction between drought stress and disease was mirrored in planta at the physiological level for aspects of water relations and photosynthesis and in terms of the severity of disease symptoms and the extent of pathogen colonization, providing a molecular correlate of the classical concept of the disease triangle in which environment impacts disease severity.
... Sweating Bad breath Acne Hair care Douching Makeup Tanning Tattoos and piercing Cosmetic surgery Points about shoes ... at your pimples Scrubbing your skin too hard Tanning Stress Wearing things that press against your skin, ...
... When showering, use a drop of fragrance-free antibacterial liquid soap to clean the jewelry and the ... your skin and delay healing. Do NOT use antibacterial ointments because they don’t allow air to ...
... information you need from the Academy of General Dentistry Friday, June 29, 2018 About | Contact InfoBites Quick ... Terms and Conditions © 1996-2018 Academy of General Dentistry. All Rights Reserved.
Intermittent many-body dynamics at equilibrium
NASA Astrophysics Data System (ADS)
Danieli, C.; Campbell, D. K.; Flach, S.
2017-06-01
The equilibrium value of an observable defines a manifold in the phase space of an ergodic and equipartitioned many-body system. A typical trajectory pierces that manifold infinitely often as time goes to infinity. We use these piercings to measure both the relaxation time of the lowest frequency eigenmode of the Fermi-Pasta-Ulam chain, as well as the fluctuations of the subsequent dynamics in equilibrium. The dynamics in equilibrium is characterized by a power-law distribution of excursion times far off equilibrium, with diverging variance. Long excursions arise from sticky dynamics close to q -breathers localized in normal mode space. Measuring the exponent allows one to predict the transition into nonergodic dynamics. We generalize our method to Klein-Gordon lattices where the sticky dynamics is due to discrete breathers localized in real space.
Investigation of the effects of electron plasma frequency on the operation of a helix TWT
NASA Astrophysics Data System (ADS)
Oksuz, Lutfi; Haytural, Necati; Uygun, Emre; Bozduman, Ferhat; Yesiltepe, Hakan; Gulec, Ali
2016-10-01
The oscillations of electrons are an important subject for the design procedure of linear beam tubes such as klystrons and TWTs. These oscillation frequencies may be affected by the finite region of the tube if the plasma wavelength of the electrons are larger than the bounding region of the device, leading to a reduced plasma frequency which further leads to an increase in wavelength. Following the Pierce's theory on traveling wave tubes, it is seen that the reduced plasma frequency takes place in space charge terms which also include the Pierce's gain parameter C. In this study the effects of plasma frequency on the operation of a helix TWT are investigated using CST Particle Studio. This project is supported by TUBITAK with project number: 1140075.
So You Want to Pierce Your Tongue?
... information you need from the Academy of General Dentistry Friday, June 29, 2018 About | Contact InfoBites Quick ... Terms and Conditions © 1996-2018 Academy of General Dentistry. All Rights Reserved.
83. OVERVIEW OF PARTIALLY COMPLETED POWERHOUSE WITH TWO UNITS IN ...
83. OVERVIEW OF PARTIALLY COMPLETED POWERHOUSE WITH TWO UNITS IN OPERATION, LOOKING UPSTREAM, Print No. 274, June 1904 - Electron Hydroelectric Project, Along Puyallup River, Electron, Pierce County, WA
75 FR 17178 - Nebraska Disaster Number NE-00033
Federal Register 2010, 2011, 2012, 2013, 2014
2010-04-05
... (FEMA-1878-DR), dated 02/25/2010 . Incident: Severe Winter Storms and Snowstorm. Incident Period: 12/22..., Frontier, Furnas, Gosper, Greeley, Harlan, Holt, Howard, Knox, Loup, Merrick, Nuckolls, Pierce, Platte...
1. DEADWOOD CREEK BRIDGE FACING SOUTHWEST. MOUNT RAINIER AND EMMONS ...
1. DEADWOOD CREEK BRIDGE FACING SOUTHWEST. MOUNT RAINIER AND EMMONS GLACIER VISIBLE IN BACKGROUND. - Deadwood Creek Bridge, Spanning Deadwood Creek on Mather Memorial Parkway, Longmire, Pierce County, WA
The Seed Semipermeable Layer and Its Relation to Seed Quality Assessment in Four Grass Species.
Lv, Yan Y; He, Xue Q; Hu, Xiao W; Wang, Yan R
2017-01-01
The existence of a semipermeable layer in grass seeds has been extensively reported, yet knowledge of its influence on tests for seed viability and vigor that depend upon measurement of electrical conductivity (EC) is limited. This study determined the presence and location of the semipermeable layer, and its relation to seed viability and vigor assessment, in seeds of four important grass species- Elymus nutans Griseb., Lolium perenne L., Leymus chinensis (Trin.) Tzvel., and Avena sativa L. Intact seeds of E. nutans, Lolium perenne , and Leymus chinensis exhibited little staining with triphenyl tetrazolium chloride (TTC), and there were no differences in EC between seeds with different germination percentage (GP) ( P > 0.05). After piercing the seed coat, however, all three species displayed positive staining with TTC, along with a significant negative correlation between EC and GP ( E. nutans : R 2 = 0.7708; Lolium perenne : R 2 = 0.8414; Leymus chinensis : R 2 = 0.859; P < 0.01). In contrast, both intact and pierced seeds of A. sativa possessed a permeable seed coat that showed positive staining with TTC and EC values that were significantly negatively correlated with GP [ R 2 = 0.9071 (intact) and 0.9597 (pierced); P < 0.01]. In commercial seed lots of A. sativa , a field emergence test indicated that EC showed a significant negative correlation with field emergence at two sowing dates ( R 2 = 0.6069, P < 0.01 and 0.5316, P < 0.05). Analysis of seed coat permeability revealed the presence of a semipermeable layer located in the seed coat adjacent to the endosperm in E. nutans, Lolium perenne , and Leymus chinensis ; however, no semipermeable layer was observed in A. sativa. This is the first report of the absence of a semipermeable layer in a grass species. The existence of a semipermeable layer is one of the most important factors affecting seed viability and vigor testing (based on EC measurement) in E. nutans, Lolium perenne , and Leymus chinensis . Increasing the permeability of the semipermeable layer, e.g., by piercing the seed coat, may permit the use of EC measurement to assess seed vigor in species that possess such a layer.
Rosin, Zuzanna M.; Tryjanowski, Piotr
2017-01-01
Background The shells of molluscs survive well in many sedimentary contexts and yield information about the diet of prehistoric humans. They also yield evidence of symbolic behaviours through their use as beads for body adornments. Researchers often analyse the location of perforations in shells to make judgements about their use as symbolic objects (e.g., beads), the assumption being that holes attributable to deliberate human behaviour are more likely to exhibit low variability in their anatomical locations, while holes attributable to natural processes yield more random perforations. However, there are non-anthropogenic factors that can cause perforations in shells and these may not be random. The aim of the study is compare the variation in holes in shells from archaeological sites from the Old World with the variation of holes in shells pierced by mollusc predators. Methods Three hundred and sixteen scientific papers were retrieved from online databases by using keywords, (e.g., ‘shell beads’; ‘pierced shells’; ‘drilling predators’); 79 of these publications enabled us to conduct a systematic review to qualitatively assess the location of the holes in the shells described in the published articles. In turn, 54 publications were used to assess the location of the holes in the shells made by non-human predators. Results Almost all archaeological sites described shells with holes in a variety of anatomical locations. High variation of hole-placement was found within the same species from the same site, as well as among sites. These results contrast with research on predatory molluscs, which tend to be more specific in where they attacked their prey. Gastropod and bivalve predators choose similar hole locations to humans. Discussion Based on figures in the analysed articles, variation in hole-location on pierced shells from archaeological sites was similar to variation in the placement of holes created by non-human animals. Importantly, we found that some predators choose similar hole locations to humans. We discuss these findings and identify factors researchers might want to consider when interpreting shells recovered from archaeological contexts. PMID:28123913
... behavior. Get help if you use illicit intravenous drugs. Don't share needles. Use condoms during sex. If you get tattoos or body piercings, make sure the shop you choose is clean and safe. Don't ...
18. VIEW OF SETTLING BASIN FROM UPSTREAM TRESTLE, SHOWING BULKHEAD ...
18. VIEW OF SETTLING BASIN FROM UPSTREAM TRESTLE, SHOWING BULKHEAD ON RIGHT AND SAND BANK ON LEFT, LOOKING NORTHWEST - Electron Hydroelectric Project, Along Puyallup River, Electron, Pierce County, WA
14. INSIDE VIEW OF FLUME, LOOKING DOWNSTREAM TOWARD SETTLING BASIN, ...
14. INSIDE VIEW OF FLUME, LOOKING DOWNSTREAM TOWARD SETTLING BASIN, SHOWING RIGHT FORK TO BYPASS, LEFT FORK TO BASIN - Electron Hydroelectric Project, Along Puyallup River, Electron, Pierce County, WA
81. VIEW OF CONNECTION BETWEEN INTAKE AND FLUME, SHOWING UNCOMPLETED ...
81. VIEW OF CONNECTION BETWEEN INTAKE AND FLUME, SHOWING UNCOMPLETED RADIAL GATE IN PLACE, Print No. 240, April 1904 - Electron Hydroelectric Project, Along Puyallup River, Electron, Pierce County, WA
65. VIEW LOOKING UPSTREAM FROM FLUME SUBSTRUCTURE, SHOWING COLUMBIA IMPROVEMENT ...
65. VIEW LOOKING UPSTREAM FROM FLUME SUBSTRUCTURE, SHOWING COLUMBIA IMPROVEMENT COMPANY'S NEISSON CREEK SAWMILL. Print No. 177, November 1903 - Electron Hydroelectric Project, Along Puyallup River, Electron, Pierce County, WA
79. VIEW OF SPILLWAY THAT AUTOMATICALLY REGULATES HEIGHT OF WATER ...
79. VIEW OF SPILLWAY THAT AUTOMATICALLY REGULATES HEIGHT OF WATER IN RESERVOIR, 'BACKWATER OVERFLOW,' Print No. 233, April 1904 - Electron Hydroelectric Project, Along Puyallup River, Electron, Pierce County, WA
Magnetic Resonance Cholangiopancreatography (MRCP)
... metallic items, which can distort MRI images removable dental work pens, pocket knives and eyeglasses body piercings In most cases, an MRI exam is safe for patients with metal implants, except for a few types. ...
3. DEADWOOD CREEK BRIDGE, VIEW BELOW DECK SHOWING OPEN SPANDREL ...
3. DEADWOOD CREEK BRIDGE, VIEW BELOW DECK SHOWING OPEN SPANDREL ARCH CONSTRUCTION AND ARCH RIBS - Deadwood Creek Bridge, Spanning Deadwood Creek on Mather Memorial Parkway, Longmire, Pierce County, WA
62. Detail of bellmouth looking southeast. Photo by Robin Lee ...
62. Detail of bellmouth looking southeast. Photo by Robin Lee Tedder, Puget Power, 1989. - Puget Sound Power & Light Company, White River Hydroelectric Project, 600 North River Avenue, Dieringer, Pierce County, WA
Lane, Jennifer C E; O'Toole, Gregory
2012-06-01
In this paper the complications of ear piercing are considered and the treatment of resultant deformities is described. Copyright © 2012 British Association of Plastic, Reconstructive and Aesthetic Surgeons. Published by Elsevier Ltd. All rights reserved.
Sealed container sampling device
NASA Technical Reports Server (NTRS)
Hennigan, T. J.
1969-01-01
Sampling device, by means of a tapered needle, pierces a sealed container while maintaining the seal and either evacuates or pressurizes the container. This device has many applications in the chemical, preservative and battery-manufacturing industries.
12. August, 1970 DETAIL FRONT PORCH OF GEORGE B. GARDNER ...
12. August, 1970 DETAIL FRONT PORCH OF GEORGE B. GARDNER HOUSE, 23 ORANGE STREET - Pierce, Easton, Russell, Bunker, & Gardner Houses, 15, 17, 19, 21 & 23 Orange Street, Nantucket, Nantucket County, MA
7. VIEW FROM NEAR INSPIRATION POINT, MOUNT RAINIER IN BACKGROUND, ...
7. VIEW FROM NEAR INSPIRATION POINT, MOUNT RAINIER IN BACKGROUND, HAER HISTORIAN RICHARD QUIN HOLDING SCALE STICK - Stevens Canyon Highway, Between Paradise, WA, & State Highway 123, Ashford, Pierce County, WA
How Piercings and Tattooing Work
... Us Media contacts Advertising contacts AAD logo Advertising, marketing and sponsorships Legal notice Copyright © 2018 American Academy ... prohibited without prior written permission. AAD logo Advertising, marketing and sponsorships Legal notice Copyright © 2017 American Academy ...
... Us Media contacts Advertising contacts AAD logo Advertising, marketing and sponsorships Legal notice Copyright © 2018 American Academy ... prohibited without prior written permission. AAD logo Advertising, marketing and sponsorships Legal notice Copyright © 2017 American Academy ...
58. VIEW OF CABLE INCLINE, LOCATED ON THE HILLSIDE BELOW ...
58. VIEW OF CABLE INCLINE, LOCATED ON THE HILLSIDE BELOW THE FOREBAY (NORTHWEST OF FOREBAY), Print No. 156, August 1903 - Electron Hydroelectric Project, Along Puyallup River, Electron, Pierce County, WA
63. PANORAMIC VIEW OF HEADWORKS FROM WEST SIDE OF RIVER, ...
63. PANORAMIC VIEW OF HEADWORKS FROM WEST SIDE OF RIVER, LOOKING UPSTREAM, Prints No. 173, 174 and 175, November 1903 - Electron Hydroelectric Project, Along Puyallup River, Electron, Pierce County, WA
53. VIEW OF PASSENGER SPEEDER 04 IN FOREGROUND, BOOM SPEEDER ...
53. VIEW OF PASSENGER SPEEDER 04 IN FOREGROUND, BOOM SPEEDER 75 IN BACKGROUND LEFT, AND BOOM SPEEDER 59 IN BACKGROUND RIGHT - Electron Hydroelectric Project, Along Puyallup River, Electron, Pierce County, WA
2. Historic American Buildings Survey Frank O. Branzetti, Photographer Nov. ...
2. Historic American Buildings Survey Frank O. Branzetti, Photographer Nov. 19, 1940. (b) EXT.-FENCE AND HOUSE ENTRANCE, LOOKING WEST - Pierce-Knapp-Perry Place, 47 High Street, Newburyport, Essex County, MA
77 FR 26759 - Sunshine Act Meeting
Federal Register 2010, 2011, 2012, 2013, 2014
2012-05-07
... Minutes for the Meeting of April 26, 2012. Draft Advisory Opinion 2012-07: Feinstein for Senate. Draft Advisory Opinion 2012-16: Angus King for U.S. Senate Campaign and Pierce Atwood LLP. Audit Division...
157. Detail of lightning arresters; looking west. Photo by Jet ...
157. Detail of lightning arresters; looking west. Photo by Jet Lowe, HAER, 1989. - Puget Sound Power & Light Company, White River Hydroelectric Project, 600 North River Avenue, Dieringer, Pierce County, WA
Design and development of a 40 kV pierce electron gun
DOE Office of Scientific and Technical Information (OSTI.GOV)
Bhattacharjee, D.; Tiwari, R.; Jayaprakash, D., E-mail: dhruva.bhattacharjee@gmail.com
A 40 kV electron gun is designed and developed using the Pierce configuration for the focusing electrode. Simulations were carried out using CST Particle Studio. The Gun is a thermionic type electron gun with indirect heating of the LaB6 cathode. The gun is capable of delivering a beam current of more than 500 mA at 40 kV with a beam size of less than 5 mm. The cathode assembly consists of cups and heat shields made out of Tantalum and Rhenium sheets. The cathode assembly and the electron gun was fabricated, assembled and tested on test bench for cathode conditioning,more » HV conditioning and beam characterization. This paper presents the gun design, particle simulations study, testing of the gun on test bench. (author)« less
Hardacre, Allan K; Lentle, Roger G; Yap, Sia-Yen; Monro, John A
2018-05-01
The measurement of the viscosity of digesta is complicated by settling and compositional changes that accompany digestion. The current work determined whether the apparent and relative viscosities ( η a and η r ) of digesta could be accurately determined from the actual and maximum solid volume fractions ( ϕ and ϕ max , respectively) using the Maron-Pierce equation. The rheological properties of digesta from the small intestine of six pigs were determined at a shear rate of 1 s -1 at 37°C. A series of suspensions of plant fibre in a Newtonian liquid (70% aqueous fructose) were made at viscosities similar to pig digesta by adjusting ϕ The relationships between the apparent and relative viscosities ( η a and η r ) and the plant fibre properties; aspect ratio (AR) and ϕ and ϕ max were then determined for digesta and the suspensions. The ARs for the digesta and plant fibre particles were determined using image analysis of scanning electron micrographs and η a from rheometric flow curves at 37°C, ϕ from image analysis and gas pycnometry, and ϕ max from AR and suspension viscosity. The η r of pig digesta and the test suspensions calculated using the Maron-Pierce equation were, with the exception of two outliers, in proportion with η a determined using a rheometer, indicating that η r could be successfully predicted from the Maron-Pierce equation. © 2018 The Author(s).
Get Involved: Smithsonian Marine Station (SMS) at Fort Pierce
Research Online Resources Get Involved Events Calendar NMNH Home Friends of SMS Volunteering Job contributions under Section 170(c). Volunteering Your Time and Talents! We have ongoing volunteer opportunities
... and don't share needles used to inject drugs. Use a condom during sex. If you choose to have tattoos or body piercings, be picky about cleanliness and safety when selecting a shop. Get vaccinated. If you're at increased risk ...
111. Detail of butterfly valve for turbine unit no. 2. ...
111. Detail of butterfly valve for turbine unit no. 2. Photo by Jet Lowe, HAER, 1989. - Puget Sound Power & Light Company, White River Hydroelectric Project, 600 North River Avenue, Dieringer, Pierce County, WA
61. VIEW OF WAREHOUSE, MACHINE SHOP, AND HOISTING PLANT, WITH ...
61. VIEW OF WAREHOUSE, MACHINE SHOP, AND HOISTING PLANT, WITH FOREBAY ON RIGHT IN FOREGROUND, Prints No. 158 and 159, August 1903 - Electron Hydroelectric Project, Along Puyallup River, Electron, Pierce County, WA
12. June 1988 INTERIOR, SOUTHWEST CORNER; SHOWING FIREFINDER (FOREGROUND), LIGHTNING ...
12. June 1988 INTERIOR, SOUTHWEST CORNER; SHOWING FIREFINDER (FOREGROUND), LIGHTNING STOOL AND BED (BOTH TO RIGHT OF FIREFINDER) - Suntop Lookout, Forest Road 510, Mt. Baker-Snoqualmie National Forest, Greenwater, Pierce County, WA
NASA Astrophysics Data System (ADS)
Coogan, J. C.; Decelles, P. G.
2007-12-01
Palinspastic reconstruction of Mesozoic thrust sheets provides the main constraint for an estimated 47 km of Cenozoic extensional displacement along the Sevier Desert detachment (SDD) in the central Sevier Desert Basin. Hanging wall and footwall piercing points indicate that the SDD accommodated a minimum of 35 km of extensional displacement in the narrower southern part of the basin. The piercing points for the SDD are defined by the intersection of the SDD, the Canyon Range thrust (CRT), and a regional early Cenozoic erosion surface (ES). The hanging wall piercing point lies immediately northeast of the Cricket Mountains, where the SDD-CRT- ES intersection is narrowly defined by intersecting structure maps derived from published seismic reflection data. The footwall piercing point lies in the southern foothills of the Canyon Range, where the SDD breakaway plane is well constrained by an industry seismic line that lies within 2 km of the exposed intersection of the CRT with the base of the Oligocene Oak City Formation. Timing of extension in the southern Sevier Desert basin is constrained by a kinematic reconstruction of detachment and imbricate fault displacement, footwall uplift, and supradetachment sedimentation for Oligocene, Miocene, and Plio-Pleistocene seismic sequences. The reconstruction is centered on a seismic reflection and gravity interpretation along the published Pan Canadian profiles 2 and 3 that is tied to dated intervals in six industry wells. Fault restoration indicates that Oligocene and Miocene phases of slip each accounted for about 40 percent of the total displacement. Simultaneous backstripping of the Oligocene, Miocene, and Plio-Pleistocene supradetachment sequences records hanging wall subsidence simultaneous with footwall uplift, with a footwall burial history that is consistent with published Miocene apatite and zircon fission-track ages of footwall samples. The geometric evolution of the southern SDD extensional system is consistent with its development above a broad westward-migrating "rolling hinge" zone associated with isostatic uplift of the detachment footwall. Hanging wall normal faults east of the footwall crest exhibit small post-Miocene displacement, with demonstrable Quaternary slip restricted to the crest and western limb of the uplift, most notably along the Black Rock and Clear Lake fault zones. Early abandonment of the eastern part of the detachment may explain the indistinct geomorphic and structural expression of the break-away zone at the surface. The deepest level of the southern SDD also presents a complex geometry and kinematic history. The 1996 Chevron 1-29 Black Rock Federal well through the western basin margin penetrated a normal fault that places Jurassic over lower Cambrian strata at 4650 m measured depth, well above the principal SDD seismic reflection. The fault is not correlated to any large- displacement high-angle fault at shallow levels, and may form the abandoned roof to an extensional duplex.
60. View of lined canal and hop barn, looking southwest. ...
60. View of lined canal and hop barn, looking southwest. Photo by Robin Lee Tedder, Puget Power, 1989. - Puget Sound Power & Light Company, White River Hydroelectric Project, 600 North River Avenue, Dieringer, Pierce County, WA
20. VIEW OF EAST END OF SPERRY OCEAN DOCK, SHOWING ...
20. VIEW OF EAST END OF SPERRY OCEAN DOCK, SHOWING SOUTH AND EAST ELEVATION, INCLUDING PORTION OF THE SPERRY OCEAN DOCK DECK, LOOKING NORTH - Puget Sound Flouring Mills, 611 Schuster Parkway, Tacoma, Pierce County, WA
75 FR 8746 - Certain Steel Grating From China
Federal Register 2010, 2011, 2012, 2013, 2014
2010-02-25
... sheet or thin plate steel that has been slit and expanded, and does not involve welding or joining of..., that has been pierced and cold formed, and does not involve welding or joining of multiple pieces of...
46. VIEW, LOOKING WEST FROM DETERIORATED END OF FLUME AT ...
46. VIEW, LOOKING WEST FROM DETERIORATED END OF FLUME AT RESERVOIR'S EAST EDGE, SHOWING DREDGE IN LEFT BACKGROUND, SIDE VIEW OF FOREBAY SHED ON RIGHT - Electron Hydroelectric Project, Along Puyallup River, Electron, Pierce County, WA
80. VIEW OF PLACING WHEELS IN SHAFT OF NO. 2 ...
80. VIEW OF PLACING WHEELS IN SHAFT OF NO. 2 UNIT IN POSITION. OVERVIEW LOOKING EAST IN THE POWERHOUSE, Print No. 234, April 1904 - Electron Hydroelectric Project, Along Puyallup River, Electron, Pierce County, WA
70. VIEW OF PARTIALLY COMPLETED FLUME BELOW THE AUTOMATIC SPILL ...
70. VIEW OF PARTIALLY COMPLETED FLUME BELOW THE AUTOMATIC SPILL AT THE RESERVOIR, SHOWING MOUNT RAINIER IN THE DISTANCE, Print No. 192, December 1903 - Electron Hydroelectric Project, Along Puyallup River, Electron, Pierce County, WA
15. INSIDE VIEW OF FLUME, LOOKING DOWNSTREAM, LEFT FORK TO ...
15. INSIDE VIEW OF FLUME, LOOKING DOWNSTREAM, LEFT FORK TO SETTLING BASIN, SHOWING RIGHT FORK WITH GATE IN PLACE AND A FEW NEEDLES IN PLACE - Electron Hydroelectric Project, Along Puyallup River, Electron, Pierce County, WA
30 CFR 56.7011 - Straightening crossed cables.
Code of Federal Regulations, 2012 CFR
2012-07-01
... Rotary Jet Piercing Drilling § 56.7011 Straightening crossed cables. The drill stem shall be resting on the bottom of the hole or on the platform with the stem secured to the mast before attempts are made...
30 CFR 56.7011 - Straightening crossed cables.
Code of Federal Regulations, 2010 CFR
2010-07-01
... Rotary Jet Piercing Drilling § 56.7011 Straightening crossed cables. The drill stem shall be resting on the bottom of the hole or on the platform with the stem secured to the mast before attempts are made...
30 CFR 57.7011 - Straightening crossed cables.
Code of Federal Regulations, 2010 CFR
2010-07-01
... and Rotary Jet Piercing Drilling-Surface Only § 57.7011 Straightening crossed cables. The drill stem shall be resting on the bottom of the hole or on the platform with the stem secured to the mast before...
29. TRACK LAYOUT, INDEX TO DRAWINGS AND INDEX TO MATERIALS, ...
29. TRACK LAYOUT, INDEX TO DRAWINGS AND INDEX TO MATERIALS, REED & STEM ARCHITECTS, ST. PAUL, NEW YORK, 1909 (Burlington Northern Collection, Seattle, Washington) - Union Passenger Station Concourse, 1713 Pacific Avenue, Tacoma, Pierce County, WA
30 CFR 56.7011 - Straightening crossed cables.
Code of Federal Regulations, 2011 CFR
2011-07-01
... Rotary Jet Piercing Drilling § 56.7011 Straightening crossed cables. The drill stem shall be resting on the bottom of the hole or on the platform with the stem secured to the mast before attempts are made...
30 CFR 56.7011 - Straightening crossed cables.
Code of Federal Regulations, 2013 CFR
2013-07-01
... Rotary Jet Piercing Drilling § 56.7011 Straightening crossed cables. The drill stem shall be resting on the bottom of the hole or on the platform with the stem secured to the mast before attempts are made...
30 CFR 57.7011 - Straightening crossed cables.
Code of Federal Regulations, 2012 CFR
2012-07-01
... and Rotary Jet Piercing Drilling-Surface Only § 57.7011 Straightening crossed cables. The drill stem shall be resting on the bottom of the hole or on the platform with the stem secured to the mast before...
30 CFR 57.7011 - Straightening crossed cables.
Code of Federal Regulations, 2011 CFR
2011-07-01
... and Rotary Jet Piercing Drilling-Surface Only § 57.7011 Straightening crossed cables. The drill stem shall be resting on the bottom of the hole or on the platform with the stem secured to the mast before...
30 CFR 57.7011 - Straightening crossed cables.
Code of Federal Regulations, 2013 CFR
2013-07-01
... and Rotary Jet Piercing Drilling-Surface Only § 57.7011 Straightening crossed cables. The drill stem shall be resting on the bottom of the hole or on the platform with the stem secured to the mast before...
30 CFR 56.7011 - Straightening crossed cables.
Code of Federal Regulations, 2014 CFR
2014-07-01
... Rotary Jet Piercing Drilling § 56.7011 Straightening crossed cables. The drill stem shall be resting on the bottom of the hole or on the platform with the stem secured to the mast before attempts are made...
30 CFR 57.7011 - Straightening crossed cables.
Code of Federal Regulations, 2014 CFR
2014-07-01
... and Rotary Jet Piercing Drilling-Surface Only § 57.7011 Straightening crossed cables. The drill stem shall be resting on the bottom of the hole or on the platform with the stem secured to the mast before...
To modify the definition of armor piercing ammunition to better capture its capabilities.
Rep. Speier, Jackie [D-CA-14
2013-06-27
House - 07/15/2013 Referred to the Subcommittee on Crime, Terrorism, Homeland Security, and Investigations. (All Actions) Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:
33. Photocopy of drawing STANDARD PLAN L4, SHEET 6 OF ...
33. Photocopy of drawing STANDARD PLAN L-4, SHEET 6 OF 8; CROSS SECTION, FRONT ELEVATION WITH SHUTTERS, FIRE FINDER - Suntop Lookout, Forest Road 510, Mt. Baker-Snoqualmie National Forest, Greenwater, Pierce County, WA
Federal Register 2010, 2011, 2012, 2013, 2014
2012-02-21
.... Nehalem St., Clatskanie, 12000078 Douglas County Oregon State Soldier's Home Hospital, 1624 W. Harvard Ave... Forest Ave., 205-221 Lewis St., Vermillion, 12000086 WASHINGTON Pierce County Curran, Charles and Mary...
ERIC Educational Resources Information Center
Gregor, Keith, Ed.
2002-01-01
This collection of papers includes the following: "Preface" (Keith Gregor); "Cultural Nationalism and the Irish Literary Revival" (David Pierce); "Transitions in Irish Miscellanies between 1923 and 1940" (Malcom Ballin); "Born into the Troubles: Deirdre Madden's 'Hidden Symptoms'" (Tamara Benito de la…
Business English Hotline Provides Answers--To Callers and Educators.
ERIC Educational Resources Information Center
Guffey, Mary Ellen
1980-01-01
Describes a business English hotline, staffed by faculty members, which serves to augment the instructional aims of Los Angeles Pierce College, and keeps faculty members in touch with the office world and its problems. (JOW)
75 FR 44975 - Notice of Intent To Solicit Nominations, Western Oregon Resource Advisory Committees
Federal Register 2010, 2011, 2012, 2013, 2014
2010-07-30
... for nominations, published in the Federal Register on April 29, 2010, did not result in a sufficient... 97459, (541) 756-0100; Eugene District Resource Advisory Committee: Pat Johnston, 3106 Pierce Parkway...
76 FR 25762 - Qualification of Drivers; Exemption Applications; Vision
Federal Register 2010, 2011, 2012, 2013, 2014
2011-05-05
.... Cotner Randel G. Pierce Everett A. Doty Timmy J. Pottenbaum John K. Fank Manuel H. Sanchez Bobby G... revoke the exemption of a driver. Issued on: April 22, 2011. Larry W. Minor, Associate Administrator for...
Federal Register 2010, 2011, 2012, 2013, 2014
2010-03-17
... comments should be submitted by April 1, 2010. Before including your address, phone number, e-mail address...., 209 & 301 W. Pierce, & 524 & 600 Huntington, Council Bluffs, 10000160 MASSACHUSETTS Franklin County...
154. Detail of lightning arrester on hillside above powerhouse; looking ...
154. Detail of lightning arrester on hillside above powerhouse; looking north. Photo by Jet Lowe, HAER, 1989. - Puget Sound Power & Light Company, White River Hydroelectric Project, 600 North River Avenue, Dieringer, Pierce County, WA
156. Detail of lightning arrester on hillside above powerhouse; looking ...
156. Detail of lightning arrester on hillside above powerhouse; looking west. Photo by Jet Lowe, HAER, 1989. - Puget Sound Power & Light Company, White River Hydroelectric Project, 600 North River Avenue, Dieringer, Pierce County, WA
155. Detail of lightning arrester on hillside above powerhouse; looking ...
155. Detail of lightning arrester on hillside above powerhouse; looking north. Photo by Jet Lowe, HAER, 1989. - Puget Sound Power & Light Company, White River Hydroelectric Project, 600 North River Avenue, Dieringer, Pierce County, WA
Höhner, Gesche; Teismann, Tobias; Willutzki, Ulrike
2014-02-01
Do women suffering from borderline symptomatology differ from women without these symptoms regarding their motives for body modifications?A sample of 289 women with body modifications were questioned about their tattoos, piercings and motives for body modifications as well as about symptoms of borderline personality disorder. Women with borderline symptomatology were compared to women without borderline symptomatology concerning the extent of and motives for body modification.The 2 groups showed no differences in regard to amount and extent of body modifications. The "borderline"-group considered individuality, coping and management of negative life-events to be more crucial reasons for body modification than the non-borderline females.The degree of a person's body modification is not a feasible indicator for psychopathological strain. Though, for people with borderline tendency body modification may serve as a coping strategy similar to self-injury. © Georg Thieme Verlag KG Stuttgart · New York.
Leong, Stephen Chan Teck; Kueh, Roland Jui Heng
2011-01-01
Seasonal population of the fruit-piercing moths Eudocima spp. was monitored throughout the citrus growing seasons in a citrus orchard and in site adjacent to secondary forest from July 2007 to June 2009. The moth was detected practically throughout the year with activity lowest during the wet months (September-February) when fruits are still available and while highest during the dry months (May-June) which also coincided with the main fruiting season. The effects of an nC24 horticultural mineral oil (HMO) on the citrus fruit damage caused by fruit-piecing moths was also determined. The percent fruit damage was significantly lowest (P≤0.05) in HMO-treated plots (8.4), followed by Dimethoate-treated plots (11.6) and untreated plots (22.5). However, there was no significant difference between HMO and Dimethoate treated plots indicating HMO is effective in reducing percent fruit damage. PMID:22203789
A dendrite-suppressing composite ion conductor from aramid nanofibres.
Tung, Siu-On; Ho, Szushen; Yang, Ming; Zhang, Ruilin; Kotov, Nicholas A
2015-01-27
Dendrite growth threatens the safety of batteries by piercing the ion-transporting separators between the cathode and anode. Finding a dendrite-suppressing material that combines high modulus and high ionic conductance has long been considered a major technological and materials science challenge. Here we demonstrate that these properties can be attained in a composite made from Kevlar-derived aramid nanofibres assembled in a layer-by-layer manner with poly(ethylene oxide). Importantly, the porosity of the membranes is smaller than the growth area of the dendrites so that aramid nanofibres eliminate 'weak links' where the dendrites pierce the membranes. The aramid nanofibre network suppresses poly(ethylene oxide) crystallization detrimental for ion transport, giving a composite that exhibits high modulus, ionic conductivity, flexibility, ion flux rates and thermal stability. Successful suppression of hard copper dendrites by the composite ion conductor at extreme discharge conditions is demonstrated, thereby providing a new approach for the materials engineering of solid ion conductors.
Intermittent Fermi-Pasta-Ulam Dynamics at Equilibrium
NASA Astrophysics Data System (ADS)
Campbell, David; Danieli, Carlo; Flach, Sergej
The equilibrium value of an observable defines a manifold in the phase space of an ergodic and equipartitioned many-body syste. A typical trajectory pierces that manifold infinitely often as time goes to infinity. We use these piercings to measure both the relaxation time of the lowest frequency eigenmode of the Fermi-Pasta-Ulam chain, as well as the fluctuations of the subsequent dynamics in equilibrium. We show that previously obtained scaling laws for equipartition times are modified at low energy density due to an unexpected slowing down of the relaxation. The dynamics in equilibrium is characterized by a power-law distribution of excursion times far off equilibrium, with diverging variance. The long excursions arise from sticky dynamics close to regular orbits in the phase space. Our method is generalizable to large classes of many-body systems. The authors acknowledge financial support from IBS (Project Code IBS-R024-D1).
Giant amplification in degenerate band edge slow-wave structures interacting with an electron beam
DOE Office of Scientific and Technical Information (OSTI.GOV)
Othman, Mohamed A. K.; Veysi, Mehdi; Capolino, Filippo
2016-03-15
We propose a new amplification regime based on a synchronous operation of four degenerate electromagnetic (EM) modes in a slow-wave structure and the electron beam, referred to as super synchronization. These four EM modes arise in a Fabry-Pérot cavity when degenerate band edge (DBE) condition is satisfied. The modes interact constructively with the electron beam resulting in superior amplification. In particular, much larger gains are achieved for smaller beam currents compared to conventional structures based on synchronization with only a single EM mode. We demonstrate giant gain scaling with respect to the length of the slow-wave structure compared to conventionalmore » Pierce type single mode traveling wave tube amplifiers. We construct a coupled transmission line model for a loaded waveguide slow-wave structure exhibiting a DBE, and investigate the phenomenon of giant gain via super synchronization using the Pierce model generalized to multimode interaction.« less
Hepatitis B vaccination for injection drug users--Pierce County, Washington, 2000.
2001-05-18
Hepatitis B vaccination has been recommended for injection drug users (IDUs) since 1982, but vaccination coverage of IDUs remains low (1), and outbreaks of hepatitis B among IDUs continue to occur. An outbreak of hepatitis B primarily among IDUs in Pierce County, Washington, detected in April 2000, included 60 cases and resulted in three deaths among IDUs co-infected with hepatitis delta virus. A program to administer hepatitis B vaccine to IDUs was implemented to control the outbreak, and the number of cases identified decreased from 13 per month in May to two cases since November. This report describes a vaccination program during which IDUs accepted hepatitis B vaccination provided free of charge in community-based settings and illustrates how effective hepatitis B vaccination programs targeted at IDUs can be implemented through collaborations between departments of health and corrections and community organizations.
Kamimura, Yoshitaka; Mitsumoto, Hiroyuki; Lee, Chow-Yang
2014-01-01
During mating, male bed bugs (Cimicidae) pierce the female abdomen to inject sperm using their needle-like genitalia. Females evolved specialized paragenital organs (the spermalege and associated structures) to receive traumatically injected ejaculates. In Leptocimex duplicatus, the spermalege is duplicated, but the evolutionary significance of this is unclear. In Cimex hemipterus and C. lectularius, in which females normally develop a single spermalege on the right side of the abdomen, similar duplication sometimes occurs. Using these aberrant morphs (D-females) of C. hemipterus, we tested the hypothesis that both of the duplicated spermaleges are functionally competent. Scars on female abdominal exoskeletons indicated frequent misdirected piercing by male genitalia. However, the piercing sites showed a highly biased distribution towards the right side of the female body. A mating experiment showed that when the normal insemination site (the right-side spermalege) was artificially covered, females remained unfertilized. This was true even when females also had a spermalege on the left side (D-females). This result was attributed to handedness in male mating behavior. Irrespective of the observed disuse of the left-side spermalege by males for insemination, histological examination failed to detect any differences between the right-side and left-side spermaleges. Moreover, an artificial insemination experiment confirmed that spermatozoa injected into the left-side spermalege show apparently normal migration behavior to the female reproductive organs, indicating an evolutionary potential for functionally-competent duplicated spermaleges. We discuss possible mechanisms for the evolutionary maintenance of D-females and propose a plausible route to the functionally-competent duplicated spermaleges observed in L. duplicatus. PMID:24586643
Modelling the Crust beneath the Kashmir valley in Northwestern Himalaya
NASA Astrophysics Data System (ADS)
Mir, R. R.; Parvez, I. A.; Gaur, V. K.; A.; Chandra, R.; Romshoo, S. A.
2015-12-01
We investigate the crustal structure beneath five broadband seismic stations in the NW-SE trendingoval shaped Kashmir valley sandwiched between the Zanskar and the Pir Panjal ranges of thenorthwestern Himalaya. Three of these sites were located along the southwestern edge of the valley andthe other two adjoined the southeastern. Receiver Functions (RFs) at these sites were calculated usingthe iterative time domain deconvolution method and jointly inverted with surface wave dispersiondata to estimate the shear wave velocity structure beneath each station. To further test the results ofinversion, we applied forward modelling by dividing the crust beneath each station into 4-6homogeneous, isotropic layers. Moho depths were separately calculated at different piercing pointsfrom the inversion of only a few stacked receiver functions of high quality around each piercing point.These uncertainties were further reduced to ±2 km by trial forward modelling as Moho depths werevaried over a range of ±6 km in steps of 2 km and the synthetic receiver functions matched with theinverted ones. The final values were also found to be close to those independently estimated using theH-K stacks. The Moho depths on the eastern edge of the valley and at piercing points in itssouthwestern half are close to 55 km, but increase to about 58 km on the eastern edge, suggesting thathere, as in the central and Nepal Himalaya, the Indian plate dips northeastwards beneath the Himalaya.We also calculated the Vp/Vs ratio beneath these 5 stations which were found to lie between 1.7 and1.76, yielding a Poisson's ratio of ~0.25 which is characteristic of a felsic composition.
61. View of bellmouth which empties into Printz Basin, looking ...
61. View of bellmouth which empties into Printz Basin, looking west. Photo by Robin Lee Tedder, Puget Power, 1989. - Puget Sound Power & Light Company, White River Hydroelectric Project, 600 North River Avenue, Dieringer, Pierce County, WA
50. Stream gaging station in steelpipe well and shelter, looking ...
50. Stream gaging station in steel-pipe well and shelter, looking west. Photo by Robin Lee Tedder, Puget Power, 1989. - Puget Sound Power & Light Company, White River Hydroelectric Project, 600 North River Avenue, Dieringer, Pierce County, WA
4. Photocopy of a 1943 architectural drawing titled: 'Patients & ...
4. Photocopy of a 1943 architectural drawing titled: 'Patients & Detachment Mess, MESS-Z-H. Elevations & Sections.' 1-13-43 - Madigan Hospital, Patients' & Medical Detachments, Bounded by Wilson & McKinley Avenues & Garfield & Lincoln Streets, Tacoma, Pierce County, WA
78. VIEW OF UNCOMPLETED RESERVOIR, SHOWING FOREBAY AND FLUME; ALSO ...
78. VIEW OF UNCOMPLETED RESERVOIR, SHOWING FOREBAY AND FLUME; ALSO SHOWING POOL ARRANGEMENT FOR TEMPORARILY UTILIZING WATER WITHOUT FILLING THE RESERVOIR, Print No. 232, April 1904 - Electron Hydroelectric Project, Along Puyallup River, Electron, Pierce County, WA
Device for removing blackheads
Berkovich, Tamara
1995-03-07
A device for removing blackheads from pores in the skin having a elongated handle with a spoon shaped portion mounted on one end thereof, the spoon having multiple small holes piercing therethrough. Also covered is method for using the device to remove blackheads.
Federal Register 2010, 2011, 2012, 2013, 2014
2011-01-03
... Department's Notice of Determination was published in the Federal Register on April 23, 2010 (75 FR 21354... carbide performs and armor piercing products. Information obtained by the Department revealed that the...
Federal Register 2010, 2011, 2012, 2013, 2014
2010-04-23
... the Manager of Receivership Oversight in the appropriate service center. Dated: April 19, 2010... Riverside National Fort Pierce......... FL 4/16/2010 Bank of Florida. 10217 Tamalpais Bank...... San Rafael...
Federal Register 2010, 2011, 2012, 2013, 2014
2013-05-29
... Particles in the Wapato Hills-Puyallup River Valley PM2.5 Nonattainment Area (the name formerly used for the...]. * * * * * * * * * * * * (e) * * * State of Washington Nonregulatory Provisions and Quasi-Regulatory Measures Applicable Name...
Majori, S; Capretta, F; Baldovin, T; Busana, M; Baldo, V; Collaborative Group
2013-03-01
Body piercing (P) and tattoo (T) is a growing social phenomenon over recent years. Nowadays in Italy little is known about the prevalence, the attitude, the medical and social consequences of these activities. The purpose of this study is to examine the prevalence distribution and the attitude towards P and T and the perception of the risk for infections, in a sample of high school students living in the four Provinces of the Veneto Region (Italy). An anonymous, self administrate multiple-choice questionnaire about piercing and tattoo practices was distributed during the 2009-2010 academic year to a sample of randomly extracted grades to obtain information about sociodemographic characteristics, family educational level, personal attitude, prevalence and perception of the importance of the sanitary, technical and artistic competence of the operator. The correctly compiled questionnaires were 2712 (95.4%). Males and females were respectively 46.2% and 53.8% (mean age 17 +/- 1.7 years). The 20.2% and the 6.4% of all the students had already experienced respectively P and T and resulted "very interested" the 46.7% to P and the 57.4% to T. Esthetical motivations are the main ones referred to use body art. The most part of interviewed subjects (81.6%) think that it is possible to have an infection, but only about 50% of students reported to know specific information about transmission of HIV, Viral Hepatitis and skin infections. The parents' educational levels do not influence the perception of the risk of infection. The majority of interviewed subjects (88.0%) prefers to undergo body art practices in a qualified center. Only the 30% of students recur to a medical help to solve problem of infection. The piercing and tattoo prevalence rate in our study (P: 20.2% and T:6.4%) resulted similar to other Italian ones (range reported: P: 20.3-35.1%, T: 4.8-8.6%), showing an increasing trend with age. Since a high rate of interviewed students referred a substantial ignorance about the risk of transmission of body art related infectious diseases, it is suitable to promote as soon as possible among the youth educational interventions and counseling.
NASA Astrophysics Data System (ADS)
Tumiati, S.; Tiraboschi, C.; Recchia, S.; Poli, S.
2014-12-01
The quantitative assessment of species in COH fluids is crucial in modelling mantle processes. For instance, H2O/CO2 ratio in the fluid phase influences the location of the solidus and of carbonation/decarbonation reactions in peridotitic systems . In the scientific literature, the speciation of COH fluids has been generally assumed on the basis of thermodynamic calculations using equations of state of simple H2O-non-polar gas systems (e.g., H2O-CO2-CH4). Only few authors dealt with the experimental determination of high-pressure COH fluid species at different conditions, using diverse experimental and analytical approaches (e.g., piston cylinder+capsule-piercing+gas-chromatography/mass-spectrometry; cold-seal+silica glass capsules+Raman). We performed experiments on COH fluids using a capsule-piercing device coupled with a quadrupole mass spectrometry. This type of analyzer ensures superior performances in terms of selectivity of molecules to be detected, high acquisition rates and extended linear response range. Experiments were carried out in a rocking piston cylinder apparatus at pressure of 1 GPa and temperatures from 800 to 900°C. Carbon-saturated fluids were generated through the addition of oxalic acid dihydrate and graphite. Single/double capsules and different packing materials (BN and MgO) were used to evaluate the divergence from the thermodynamic speciation model. Moreover, to assess the effect of solutes on COH fluid speciation we also performed a set of experiments adding synthetic forsterite to the charge. To determine the speciation we assembled a capsule-piercing device that allows to puncture the capsule in a gas-tight vessel at 80°C. The extraction Teflon vessel is composed of a base part, where the capsule is allocated on a steel support, and a top part where a steel drill is mounted. To release the quenched fluids from the capsule, the base part of vessel is hand-tighten to the top part, allowing the steel pointer to pierce the capsule. The evolved gases are then convoyed to a quadrupole mass spectrometer through a heated line to avoid the condensation of water. Our results suggest that fluid speciation can diverge considerably compared to the thermodynamic model depending on the experimental strategies adopted and on the presence of solutes in complex COH systems.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Mueller, Robert
2004-10-01
Pacific Northwest National Laboratory conducted video-based boat surveys in fall 2003 to identify spawning areas for fall Chinook salmon (Oncorhynchus tshawytscha) in deep water (>1 m) downstream of Bonneville Dam. This report documents the number and extent of Chinook salmon spawning near Ives and Pierce islands of the Columbia River, and is the fifth in a series of reports prepared since 1999. The primary objective of this study was to find deepwater spawning locations of fall Chinook salmon in the main Columbia River channel, collect additional data on physical habitat parameters at spawning sites, and provide estimates of adult spawnersmore » in the surveyed area. The secondary objective was to document the occurrence of any chum salmon (O. keta) redds in the deeper sections near below Hamilton Creek. Results from the 2003 study show a continuing trend upward in the number of fall Chinook salmon redds found within the survey zones. The number of fall Chinook redds found in the Ives Pierce Island complex (river km 228.5) has increased by a factor of five since the surveys began in 1999. The total number of redds found during 2003 was 336, which compares to 192 in 2002, 43 in 2001, 76 in 2000, and 64 in 1999. The redds encompassed an area of 13.7 ha occurring adjacent to the lower part of Ives Island and Pierce Island. Peak spawning activity, based on redd counts and live fish seen near redds, was on or near November 24, 2003. An expanded redd count based on percentage of video coverage in the primary and secondary search zones was 3,218 fall Chinook salmon redds in water exceeding 1 m deep and flowing at about 125 kcfs. Fall Chinook salmon redds were found at water depths from 1.07 to 7.6 m and were constructed predominantly of medium cobbles ranging from 7.6 to 15.2 cm in diameter. Two chum salmon redds were found in a small location downstream from Hamilton Creek in water depths of approximately 1 m. No salmon redds were found in other areas searched, including near Woodward, Tanner, and McCord creeks.« less
59. View of lined canal east of bellmouth near hop ...
59. View of lined canal east of bellmouth near hop barn, looking southwest. Photo by Robin Lee Tedder, Puget Power, 1989. - Puget Sound Power & Light Company, White River Hydroelectric Project, 600 North River Avenue, Dieringer, Pierce County, WA
49. View of unlined canal near inline stream gaging station, ...
49. View of unlined canal near in-line stream gaging station, looking west. Photo by Robin Lee Tedder, Puget Power, 1989. - Puget Sound Power & Light Company, White River Hydroelectric Project, 600 North River Avenue, Dieringer, Pierce County, WA
5. Photocopy of a 1943 architectural drawing titled: 'Patients & ...
5. Photocopy of a 1943 architectural drawing titled: 'Patients & Detachment Mess, MESS-Z-H. Floor Plan, Part A.' 1-13-43 - Madigan Hospital, Patients' & Medical Detachments, Bounded by Wilson & McKinley Avenues & Garfield & Lincoln Streets, Tacoma, Pierce County, WA
6. Photocopy of a 1943 architectural drawing titled: 'Patients & ...
6. Photocopy of a 1943 architectural drawing titled: 'Patients & Detachment Mess, MESS-Z-H. Floor Plan, Part B.' 1-13-43 - Madigan Hospital, Patients' & Medical Detachments, Bounded by Wilson & McKinley Avenues & Garfield & Lincoln Streets, Tacoma, Pierce County, WA
Surface Piercing Propeller Performance
2005-09-01
solid body ( hydrodynamic cavitation ) or by high-intensity sound waves (acoustic cavitation). A Research study done by Yin Lu Young at UT studied and...discusses the effect of hydrodynamic cavitation , which occurs when pressure drops below the saturated vapor pressure, consequently resulting in the
75 FR 15724 - National Register of Historic Places; Weekly Listing of Historic Properties
Federal Register 2010, 2011, 2012, 2013, 2014
2010-03-30
...., Washington, DC 20240; in person (by appointment), 1201 Eye St., NW., 8th floor, Washington, DC 20005; by fax... WASHINGTON Pierce County Blue Mouse Theatre, 2611 N. Proctor St., Tacoma, 09001235, LISTED, 1/13/10 (Movie...
Federal Register 2010, 2011, 2012, 2013, 2014
2013-05-17
... to be closely related to banking and permissible for bank holding companies. Unless otherwise noted...., Fort Pierce, Florida; to acquire 100 percent of the voting shares of BSA Financial Services, Inc., and...
St. Paul central corridor study : Pierce Butler industrial redevelopment parkway
DOT National Transportation Integrated Search
2003-07-01
At present, development in the St. Paul Central Corridor is occurring piecemeal and lacks an integrative vision. This study's aim was to devise design approaches that create a district which integrates light industrial job creation and retention with...
History, principles, and summary of applications of electropenetrography (EPG)
USDA-ARS?s Scientific Manuscript database
Studying feeding, plant damage, and transmission (i.e. acquisition, retention, and inoculation) of plant pathogens by hemipteran insect pests is challenging. Hemipteran piercing-sucking mouthparts, the stylets, are probed into opaque plant tissues precluding direct observation. This challenge was ov...
Online Resources: Smithsonian Marine Station (SMS) at Fort Pierce
to do so with a goal of promoting public awareness and the need for stewardship of the IRL as an students, the public and scientific community, and we encourage you to explore this dynamic, ever-growing
Interior below decks in fish hold looking forward. Fish hatch ...
Interior below decks in fish hold looking forward. Fish hatch opening is at upper left, ceiling planks and knees at center and right. - Purse Seiner SHENANDOAH, Gig Harbor Peninsula Historical Society and Museum, Gig Harbor, Pierce County, WA
17. VIEW OF SETTLING BASIN, SHOWING FLUME TRACK SPUR CROSSING ...
17. VIEW OF SETTLING BASIN, SHOWING FLUME TRACK SPUR CROSSING OVER SETTLING BASIN, SPARE BENT MATERIAL IN RIGHT-HAND FOREGROUND, BYPASS FLUME, AND SHACK #6 IN BACKGROUND, LOOKING NORTHWEST - Electron Hydroelectric Project, Along Puyallup River, Electron, Pierce County, WA
41. VIEW FROM END OF FLUME, LOOKING WEST, SHOWING OVERFLOW ...
41. VIEW FROM END OF FLUME, LOOKING WEST, SHOWING OVERFLOW CHUTE ON RIGHT (PARALLEL TO FLUME), RESERVOIR EMBANKMENT IN BACKGROUND, AND HOOKS ON END OF RAILING FOR SPILLBOARDS - Electron Hydroelectric Project, Along Puyallup River, Electron, Pierce County, WA
Control of Frankliniella occidentalis with foliar insecticides, 2014
USDA-ARS?s Scientific Manuscript database
The objective of this study was to evaluate the efficacy of selected chemical insecticides against a western flower thrips Frankliniella occidentalis Pergande, in ornamental pepper under greenhouse condition. The trial was conducted at United States Horticultural Research Laboratory in Fort Pierce, ...
Federal Register 2010, 2011, 2012, 2013, 2014
2010-04-23
... the Manager of Receivership Oversight in the appropriate service center. Dated: April 19, 2010... Fort Pierce......... FL 4/16/2010 Bank of Florida. 10217 Tamalpais Bank...... San Rafael CA 4/16/2010...
52. View of sitdown cable car, cable way, and stream ...
52. View of sit-down cable car, cable way, and stream gaging station, looking southeast. Photo by Robin Lee Tedder, Puget Power, 1989. - Puget Sound Power & Light Company, White River Hydroelectric Project, 600 North River Avenue, Dieringer, Pierce County, WA
53. View of unlined canal about 1,500' west of streamgaging ...
53. View of unlined canal about 1,500' west of stream-gaging station, looking west. Photo by Robin Lee Tedder, Puget Power, 1989. - Puget Sound Power & Light Company, White River Hydroelectric Project, 600 North River Avenue, Dieringer, Pierce County, WA
51. View of sitdown cable car and cable way for ...
51. View of sit-down cable car and cable way for stream gaging, looking west. Photo by Robin Lee Tedder, Puget Power, 1989. - Puget Sound Power & Light Company, White River Hydroelectric Project, 600 North River Avenue, Dieringer, Pierce County, WA
Variable Temperature Scanning Tunneling Microscopy
1991-07-01
Tomazin, both Electrical Engineering. Build a digital integrator for the STM feedback loop: Kyle Drewry, Electrical Engineering. Write an AutoLisp ...program to automate the AutoCad design of UHV-STM chambers: Alfred Pierce (minority), Mechanical Engineering. Design a 32-bit interface board for the EISA
DETAIL ELEVATION SHOWING THE ROOF TRUSSES, PURLINS, AND SKYLIGHT. NOTE ...
DETAIL ELEVATION SHOWING THE ROOF TRUSSES, PURLINS, AND SKYLIGHT. NOTE THE DOORS TO THE WEIGHTLIFTING ROOM. VIEW FACING SOUTHEAST - U.S. Naval Base, Pearl Harbor, Gymnasium Building, North Waterfront & Pierce Street near Berth S-13, Pearl City, Honolulu County, HI
Federal Register 2010, 2011, 2012, 2013, 2014
2010-06-10
... restricting deep draft vessels from creating a wake near the exercise. DATES: This rule is effective from 7 a... exercise area, and from creating large wakes near the exercise. Discussion of Rule This rule establishes a...
DETAIL OF ORIGINAL SLIDING DOORS ALTERED WITH OPENING FOR HINGED ...
DETAIL OF ORIGINAL SLIDING DOORS ALTERED WITH OPENING FOR HINGED DOOR. WITH GRADUATED SCALE IN 1' INCREMENTS. VIEW FACING NORTHWEST - U.S. Naval Base, Pearl Harbor, Gymnasium Building, North Waterfront & Pierce Street near Berth S-13, Pearl City, Honolulu County, HI
DETAIL OF ORIGINAL SIXOVERSIXLIGHT DOUBLEHUNG SASH WINDOWS WITH GRADUATED SCALE ...
DETAIL OF ORIGINAL SIX-OVER-SIX-LIGHT DOUBLE-HUNG SASH WINDOWS WITH GRADUATED SCALE IN 1' INCREMENTS. VIEW FACING NORTHWEST - U.S. Naval Base, Pearl Harbor, Gymnasium Building, North Waterfront & Pierce Street near Berth S-13, Pearl City, Honolulu County, HI
DETAIL OF THE INTERIOR WALL VENTILATION BAND FROM THE MAIN ...
DETAIL OF THE INTERIOR WALL VENTILATION BAND FROM THE MAIN GYMNASIUM AREA TO THE LOCKER ROOM AREA. VIEW FACING WEST - U.S. Naval Base, Pearl Harbor, Gymnasium Building, North Waterfront & Pierce Street near Berth S-13, Pearl City, Honolulu County, HI
5. Corridor A and Building No. 9962A (with white door). ...
5. Corridor A and Building No. 9962-A (with white door). In upper left is east side of Building No. 9952-B. - Madigan Hospital, Corridors & Ramps, Bounded by Wilson & McKinley Avenues & Garfield & Lincoln Streets, Tacoma, Pierce County, WA
1. 133842 PACIFIC AVE. ITALIANATE BUILDING ON LEFT IS THE ...
1. 1338-42 PACIFIC AVE. ITALIANATE BUILDING ON LEFT IS THE CITIZENS BANK AND THE IRVING BUILDING (1888-89). A HOMOGENEOUS DESIGN FOR THREE SEPERATE PROPERTY OWNERS, DESIGNED BY CARL AUGUST DARMER. - Union Depot Area Study, Tacoma, Pierce County, WA
Code of Federal Regulations, 2010 CFR
2010-07-01
... Perkins County Phelps County Pierce County Platte County Polk County Red Willow County Richardson County... Morrill County Nance County Nemaha County Nuckolls County Otoe County Pawnee County Perkins County Phelps... Morrill County Nance County Nemaha County Nuckolls County Otoe County Pawnee County Perkins County Phelps...
Code of Federal Regulations, 2011 CFR
2011-07-01
... Perkins County Phelps County Pierce County Platte County Polk County Red Willow County Richardson County... Morrill County Nance County Nemaha County Nuckolls County Otoe County Pawnee County Perkins County Phelps... Morrill County Nance County Nemaha County Nuckolls County Otoe County Pawnee County Perkins County Phelps...
5. HISTORIC PHOTOGRAPH OF FIRST CHRISTINE FALLS BRIDGE, BUILT BY ...
5. HISTORIC PHOTOGRAPH OF FIRST CHRISTINE FALLS BRIDGE, BUILT BY U.S. ARMY CORPS OF ENGINEERS CA. 1908. PHOTOGRAPHER TAKEN 1911. MOUNT RAINIER NATIONAL PARK ARCHIVES - Christine Falls Bridge, Spanning Van Trump Creek on Nisqually Road, Longmire, Pierce County, WA
24 CFR 3280.305 - Structural design requirements.
Code of Federal Regulations, 2012 CFR
2012-04-01
..., Plaquemines, St. Bernard, St. Charles, St. Mary, and Terrabonne. North Carolina: Carteret, Dare, and Hyde. (iv... Sherburne Steele Jackson Morrison Anoka Freeborn Nobles Douglas Chisapo Faribault Rock Grant Washington... Douglas Oconto Pepin Lincoln Bayfield Menominee Pierce Oneida Ashland Langlade Dunn Polk Iron Marathon Eau...
24 CFR 3280.305 - Structural design requirements.
Code of Federal Regulations, 2013 CFR
2013-04-01
..., Plaquemines, St. Bernard, St. Charles, St. Mary, and Terrabonne. North Carolina: Carteret, Dare, and Hyde. (iv... Sherburne Steele Jackson Morrison Anoka Freeborn Nobles Douglas Chisapo Faribault Rock Grant Washington... Douglas Oconto Pepin Lincoln Bayfield Menominee Pierce Oneida Ashland Langlade Dunn Polk Iron Marathon Eau...
Timber resource statistics for the Puget Sound area, Washington.
Patricia M. Bassett; Daniel D. Oswald
1982-01-01
This report summarizes a 1979 timber resource inventory of eight counties in the Puget Sound area of Washington: Island, King, Kitsap, Pierce, San Juan, Skagit, Snohomish, and Whatcom. Detailed tables of forest area, timber volume, growth, mortality, and harvest are presented.
Preliminary timber resource statistics for the Puget Sound area, Washington.
Colin D. MacLean; Janet L. Ohmann; Patricia M. Bassett
1991-01-01
This report summarizes a 1989 timber resource inventory of eight counties in the Puget Sound region of Washington: Island, King, Kitsap, Pierce, Skagit, San Juan, Snohomish, and Whatcom. Detailed tables of forest area, timber volume, growth, mortality, and harvest are presented.
Federal Register 2010, 2011, 2012, 2013, 2014
2010-04-22
... Protests April 15, 2010. Take notice that the following hydroelectric application has been filed with the... located on the Nisqually River in Pierce, Thurston, and Lewis Counties, Washington, partly on lands of the...
90. View of east facade of powerhouse, and abandoned lightning ...
90. View of east facade of powerhouse, and abandoned lightning arrester houses on hillside above powerhouse; looking west. Photo by Jet Lowe, HAER, 1989. - Puget Sound Power & Light Company, White River Hydroelectric Project, 600 North River Avenue, Dieringer, Pierce County, WA
Piercing Ear Keloid: Excision Using Loupe Magnification and Topical Liquid Silicone Gel as Adjuvant
Ramesh, Bellam A.; Mohan, J.
2018-01-01
Background: Keloid is an abnormal growth of scar at the site of skin injury, which usually does not regress. It proliferates beyond the original scar. The ear keloid usually develops after piercing injury to wear ornaments. A patient usually asks for removal of keloid, as it is aesthetically unpleasant. Patient may sometimes complain of itching and pain. Aim: The study was conducted to analyze results following excision of keloid with its tract and topical silicone gel as the postsurgical adjuvant. Materials and Methods: Ear keloids measuring less than 0.5cm or more than 5cm in maximum dimension were excluded from the study. Nonpiercing causes such as burns, trauma, and recurrent keloid were excluded from the study. The study was carried out on 22 patients who had keloid because of piercing injury, including 4 cases with both ear keloids. Of 26 ear keloids, 19 had the tract or connecting tissue. The lesion was excised under anesthesia using magnification. For all the operated cases, topical liquid silicone gel was used as postsurgical adjuvant therapy. The method of application of topical silicone gel was taught to each patient and was considered significant. Result: The magnification helped in identification of tract in 73% of the cases in this study. Twenty patients had successfully responded to proposed treatment, and two patients developed recurrence while using topical silicone gel as the adjuvant. These two patients were managed with conventional triamcinolone injection. Conclusion: The topical silicone gel as postsurgical adjuvant therapy avoided the use of painful postsurgical injection or radiotherapy for the 1–3cm primary ear keloids. The advantages of magnification were better clearance of keloid tissue, easier identification of tract and removal of keloid pseudopods, meticulous suturing, and comfortable elevation of a small local flap. PMID:29731586
Body art practices and health risks: young adults' knowledge in two regions of southern Italy.
Gallè, F; Quaranta, A; Napoli, C; Di Onofrio, V; Alfano, V; Montagna, M T; Liguori, G
2012-01-01
In the past several decades the number of individuals, particularly young adults, acquiring body art has increased very seriously in occidental society. In order to verify young adults' practices and knowledge of the risks related to body art, an investigation was conducted among university freshmen in Bari (Apulia Region) and Naples (Campania Region), both in Southern Italy. The study was carried out during the period 2008-2010 through an anonymous questionnaire distributed to 3,868 people selected among 26 Degree Courses of the University of Bari and Naples Parthenope. The two regional samples were matched for age and sex. On the whole, 84.4% declare to know the infectious risks associated with body art practices, but only 4.1% of them correctly identified the infectious diseases which can be transmitted through these procedures; while 59.2% of the sample declared that non-infectious diseases can occur after a tattoo or a piercing, but only 5.4% of them correctly identified allergies, cysts, bleeding and scars. The possible occurrence of infectious and non-infectious diseases has been acknowledged by most students in Apulia region (89.7 versus 79.1% and 64.8 versus 53.6% respectively). In this Region, of the 1,001 (32.4%) pierced and 597 (19.8%) tattooed youths 23.4% reported complications. Campania region youths reported a greater number of complications than Apulia did (30.3 versus 13.1%) and they also purchased more frequently their tattoos or piercings in unauthorized facilities (35.3% versus 15.9%). With regard to the knowledge of health risks associated to body art, it has been registered a higher awareness of infectious than non-infectious diseases. Information about freshmen's knowledge and practices could help in effective planning of health promotion strategies.
Guidetti, Roberto; Bonifacio, Alois; Altiero, Tiziana; Bertolani, Roberto; Rebecchi, Lorena
2015-08-01
The cuticular portion of the tardigrade feeding apparatus is a complex structure that can be schematically divided into four parts: a buccal ring, a buccal tube, a stylet system (formed by two piercing stylets, each within a stylet coat, and two stylet supports), and the lining of a myoepithelial sucking pharynx. To better understand the function and evolution of the feeding apparatus, the morpho-functional traits and chemical composition of the structures forming the feeding apparatuses of eight different species of tardigrades were analyzed. These eight species are representative of almost all main phylogenetic lineages of the phylum. The calcium and chitin in the feeding apparatus were examined by light microscopy, scanning electron microscopy, confocal laser scanning microscopy, energy dispersive X-ray spectroscopy, and Raman microspectroscopy (Raman). In all species, the feeding apparatus had been subjected to biomineralization due to CaCO3 encrustations organized in the crystalline form of aragonite. Aragonite and chitin are present in different concentrations in the feeding apparatus according to the structures and species considered. Generally, where the structures are rigid there is more aragonite than chitin, and vice versa. The buccal tube and piercing stylets are rich in calcium, with the piercing stylets apparently composed exclusively of aragonite. In eutardigrades, chitin is in higher concentration in the structures subject to higher mechanical stresses, such as the crests of the buccal crown and the condyles of the stylet furca. © The Author 2015. Published by Oxford University Press on behalf of the Society for Integrative and Comparative Biology. All rights reserved. For permissions please email: journals.permissions@oup.com.
Vongboot, Monnapat; Suesoonthon, Monrudee
2015-01-01
Polyurethane foam (PUF) mini-column was used to eliminate copper and iron for the determination of nickel in pierced rings. The PUF mini-column was connected to FIA system for on-line sorption of copper and iron in complexes form of CuSCN(+) and FeSCN(2+). For this season, the acid solution containing a mixture of Ni(II), Fe(III), Cu(II) and SCN(-) ions was firstly flew into the PUF column. Then, the percolated solution which Fe(III) and Cu(II) ions is separated from analysis was injected into FIA system to react with 4-(2-pyridylazo) resorcinol (PAR) reagent in basic condition which this method is called pH gradient technique. The Ni-PAR complexes obtained were measured theirs absorbance at 500 nm by UV visible spectrophotometer. In this study, it was found that Cu(II) and Fe(III) were completely to form complexes with 400 mmol/L KSCN and entirely to eliminate in acidic condition at pH 3.0. In the optimum condition of these experiments, the method provided the linear relationship between absorbance and the concentration of Ni(II) in the range from 5.00 to 30.00 mg/L. Linear equation is y=0.0134x+0.0033 (R(2)=0.9948). Precision, assessed in the term of the relative standard deviation, RSD, and accuracy for multiple determinations obtained in values of 0.77-1.73% and 97.4%, respectively. The level of an average amount of Ni(II) in six piercing rings was evaluated to be 14.78 mg/g. Copyright © 2014 Elsevier B.V. All rights reserved.
47. View of beginning of unlined canal from MundyLoss bridge ...
47. View of beginning of unlined canal from Mundy-Loss bridge downstream from fish screens, looking west. Photo by Robin Lee Tedder, Puget Power, 1989. - Puget Sound Power & Light Company, White River Hydroelectric Project, 600 North River Avenue, Dieringer, Pierce County, WA
48. View of unlined canal downstream from MundyLoss bridge, from ...
48. View of unlined canal downstream from Mundy-Loss bridge, from north side of canal looking southwest. Photo by Robin Lee Tedder, Puget Power, 1989. - Puget Sound Power & Light Company, White River Hydroelectric Project, 600 North River Avenue, Dieringer, Pierce County, WA
Report: National Conference on Cooperative Education.
ERIC Educational Resources Information Center
Bureau of Occupational and Adult Education (DHEW/OE), Washington, DC. Div. of Vocational and Technical Education.
The conference report on cooperative vocational education contains four main sections. The first, background papers, contains three papers: Education in a Changing Society, Carl H. Madden; A Prospectus for Cooperative Vocational Education, William F. Pierce; and Critical Issues in Cooperative Vocational Education, Robert M. Worthington. The second…
View down tank tunnel (tunnel no. 2) showing pipes and ...
View down tank tunnel (tunnel no. 2) showing pipes and walkway of metal grating, side tunnel to tank 3 is on the left - U.S. Naval Base, Pearl Harbor, Diesel Purification Plant, North Road near Pierce Street, Pearl City, Honolulu County, HI
ERIC Educational Resources Information Center
Julian, Liam
2009-01-01
In this article, the author talks about George Orwell, his instructive errors, and the manner in which Orwell pierced worthless theory, faced facts and defended decency (with fluctuating success), and largely ignored the tradition of accumulated wisdom that has rendered him a timeless teacher--one whose inadvertent lessons, while infrequently…
Federal Register 2010, 2011, 2012, 2013, 2014
2010-01-06
... that has been slit and expanded, and does not involve welding or joining of multiple pieces of steel... pierced and cold formed, and does not involve welding or joining of multiple pieces of steel. Certain...
2. Historic American Buildings Survey Albert S. Burns, Photographer C. ...
2. Historic American Buildings Survey Albert S. Burns, Photographer C. 1934, 1935 COPY OF PRINT LOANED BY MR. POLLEN JEWETT, NYACK, N.Y. TAKEN ABOUT 1900 VIEW ACROSS ROCK CREEK - Pierce Mill, Tilden Street & Beach Drive Northwest, Washington, District of Columbia, DC
Identifying Determinants of Commitment and Turnover Behavior.
ERIC Educational Resources Information Center
Grady, Thomas L.
A study tested the precursors to vocational teachers' commitment to teaching as suggested by the commitment model proposed by Pierce and Dunham. Important consequences of commitment were examined by identifying relationships between commitment, behavioral intentions, and resulting turnover. The study examined the entire population of teachers…
TERA submitted by the University of California, Riverside. The microorganism will be tested to determine its biology and behavior in vineyard ecosystems as part of a research program to prevent or cure Pierce's disease in grapes.
7 CFR 457.113 - Coarse grains crop insurance provisions.
Code of Federal Regulations, 2012 CFR
2012-01-01
..., Reagan, Sterling, Coke, Tom Green, Concho, McCulloch, San Saba, Mills, Hamilton, Bosque, Johnson, Tarrant..., Upton, Reagan, Sterling, Coke, Tom Green, Concho, McCulloch, San Saba, Mills, Hamilton, Bosque, Johnson... September 30. (2) Clark, Cowlitz, Grays Harbor, Island, Jefferson, King, Kitsap, Lewis, Pierce, Skagit...
7 CFR 457.113 - Coarse grains crop insurance provisions.
Code of Federal Regulations, 2014 CFR
2014-01-01
..., Reagan, Sterling, Coke, Tom Green, Concho, McCulloch, San Saba, Mills, Hamilton, Bosque, Johnson, Tarrant..., Upton, Reagan, Sterling, Coke, Tom Green, Concho, McCulloch, San Saba, Mills, Hamilton, Bosque, Johnson... September 30. (2) Clark, Cowlitz, Grays Harbor, Island, Jefferson, King, Kitsap, Lewis, Pierce, Skagit...
7 CFR 457.113 - Coarse grains crop insurance provisions.
Code of Federal Regulations, 2013 CFR
2013-01-01
..., Reagan, Sterling, Coke, Tom Green, Concho, McCulloch, San Saba, Mills, Hamilton, Bosque, Johnson, Tarrant..., Upton, Reagan, Sterling, Coke, Tom Green, Concho, McCulloch, San Saba, Mills, Hamilton, Bosque, Johnson... September 30. (2) Clark, Cowlitz, Grays Harbor, Island, Jefferson, King, Kitsap, Lewis, Pierce, Skagit...
The Americas and Hurricane Andrew
NASA Technical Reports Server (NTRS)
1992-01-01
Image taken on August 25, 1992 by NOAA GOES-7 of the Americas and Hurricane Andrew.
Photo Credit: Image produced by F. Hasler, M. Jentoft-Nilsen, H. Pierce, K. Palaniappan, and M. Manyin. NASA Goddard Lab for Atmospheres - Data from National Oceanic and Atmospheric Administration (NOAA).A Phenomenological Study of Elementary School Instructional Coaches
ERIC Educational Resources Information Center
Seid, Carol M.
2017-01-01
Problem: Many school districts have implemented instructional coaching as a mechanism to increase professional capacity and student learning (Bean, 2009; Ippolito, 2010; Lia, 2016; Massey, 2012; Pomerantz & Pierce, 2013; Walpole & Blamey, 2008). Instructional coaches have many roles and responsibilities (Bean, 2009; Borman, Feger, &…
69. VIEW OF FOREBAY AND RESERVOIR, SHOWING FLUME ENTRANCE TO ...
69. VIEW OF FOREBAY AND RESERVOIR, SHOWING FLUME ENTRANCE TO RESERVOIR ON THE RIGHT OF FOREBAY IN THE BACKGROUND (SHOWN BY THE WHITE X ON THE PHOTOGRAPHS), Print No. 191, December 1903 - Electron Hydroelectric Project, Along Puyallup River, Electron, Pierce County, WA
40. VIEW, LOOKING WEST, OF TOP OF FLUME NEAR FOREBAY, ...
40. VIEW, LOOKING WEST, OF TOP OF FLUME NEAR FOREBAY, SHOWING LUMBER SHED, TWO TRACKS, CRANEWAY SHED IN BACKGROUND, RESERVOIR TO LEFT, RIGHT TO YARDS AND FACILITIES, AND OVERFLOW SPILLWAY ON LOWER RIGHT - Electron Hydroelectric Project, Along Puyallup River, Electron, Pierce County, WA
61. VIEW FROM NORTHEAST OF LAUNDER FROM BAKER COOLER TO ...
61. VIEW FROM NORTHEAST OF LAUNDER FROM BAKER COOLER TO MILLING. LAUNDER PIERCES THE SOUTH FOUNDATION WALL BETWEEN MILL SOLUTION TANKS No. 1 AND No. 2. - Bald Mountain Gold Mill, Nevada Gulch at head of False Bottom Creek, Lead, Lawrence County, SD
Federal Register 2010, 2011, 2012, 2013, 2014
2010-01-19
... 25-Coin Rolls, honoring Presidents Millard Fillmore, Franklin Pierce, James Buchanan and Abraham Lincoln, will be priced at $35.95 each. Rolls of coins struck at both the United States Mint facilities at...
75 FR 80839 - Notice of Realty Action: Direct Sale of Public Lands in Lane County, OR
Federal Register 2010, 2011, 2012, 2013, 2014
2010-12-23
... Environmental Policy Act Adequacy (DOI-BLM-OR-E050-2010-0006- DNA) that was approved on April 14, 2010. There... documentation, is available for review at the BLM Eugene District Office, 3106 Pierce Parkway, Suite E...
77 FR 66500 - Notice of Final Federal Agency Actions on Proposed Highway in California
Federal Register 2010, 2011, 2012, 2013, 2014
2012-11-05
... will be barred unless the claim is filed on or before April 4, 2013. If the Federal law that authorizes... Anaheim and Yorba Linda to Pierce Street in the City of Riverside. The existing express lanes in Orange...
Code of Federal Regulations, 2010 CFR
2010-10-01
... and Fisheries FISHERY CONSERVATION AND MANAGEMENT, NATIONAL OCEANIC AND ATMOSPHERIC ADMINISTRATION, DEPARTMENT OF COMMERCE (CONTINUED) FISHERIES OF THE EXCLUSIVE ECONOMIC ZONE OFF ALASKA Management Measures... around Cape Pierce (58°33′ N. lat., 161°43′ W. long.). (5) Catcher Vessel Operational Area (CVOA)—(i...
153. View of lightning arrester houses on the hillside above ...
153. View of lightning arrester houses on the hillside above powerhouse (similar view as WA-64-152). Looking southeast. Photo by Jet Lowe, HAER, 1989. - Puget Sound Power & Light Company, White River Hydroelectric Project, 600 North River Avenue, Dieringer, Pierce County, WA
89. View of west and south facades of powerhouse, and ...
89. View of west and south facades of powerhouse, and abandoned lightning arrester houses on hillside above powerhouse; looking north. Photo by Jet Lowe, HAER, 1989. - Puget Sound Power & Light Company, White River Hydroelectric Project, 600 North River Avenue, Dieringer, Pierce County, WA
Experimental study on combined cold forging process of backward cup extrusion and piercing
NASA Astrophysics Data System (ADS)
Henry, Robinson; Liewald, Mathias
2018-05-01
A reduction in material usage of cold forged components while maintaining the functional requirements can be achieved using hollow or tubular preforms. These preforms are used to meet lightweight requirements and to decrease production costs of cold formed components. To increase production efficiency in common multi-stage cold forming processes, manufacturing of hollow preforms by combining the processes backward cup extrusion and piercing was established and will be discussed in this paper. Corresponding investigations and experimental studies are reported in this article. The objectives of the experimental investigations have been the detection of significant process parameters, determination of process limits for the combined processes and validation of the numerical investigations. In addition, the general influence concerning surface quality and diameter tolerance of hollow performs are discussed in this paper. The final goal is to summarize a guideline for industrial application, moreover, to transfer the knowledge to industry, as regards what are required part geometries to reduce the number of forming stages as well as tool cost.
NASA Astrophysics Data System (ADS)
Soto, Dan; Le Helloco, Antoine; Clanet, Cristophe; Quere, David; Varanasi, Kripa
2016-11-01
A drop thrown against a mesh can pass through its holes if impacting with enough inertia. As a result, although part of the droplet may remain on one side of the sieve, the rest will end up grated through the other side. This inexpensive method to break up millimetric droplets into micrometric ones may be of particular interest in a wide variety of applications: enhancing evaporation of droplets launched from the top of an evaporative cooling tower or preventing drift of pesticides sprayed above crops by increasing their initial size and atomizing them at the very last moment with a mesh. In order to understand how much liquid will be grated we propose in this presentation to start first by studying a simpler situation: a drop impacting a plate pierced with a single off centered hole. The study of the role of natural parameters such as the radius drop and speed or the hole position, size and thickness allows us to discuss then the more general situation of a plate pierced with multiple holes: the mesh.
Aerosol can waste disposal device
O'Brien, Michael D.; Klapperick, Robert L.; Bell, Chris
1993-01-01
Disclosed is a device for removing gases and liquid from containers. The ice punctures the bottom of a container for purposes of exhausting gases and liquid from the container without their escaping into the atmosphere. The device includes an inner cup or cylinder having a top portion with an open end for receiving a container and a bottom portion which may be fastened to a disposal or waste container in a substantially leak-proof manner. A piercing device is mounted in the lower portion of the inner cylinder for puncturing the can bottom placed in the inner cylinder. An outer cylinder having an open end and a closed end fits over the top portion of the inner cylinder in telescoping engagement. A force exerted on the closed end of the outer cylinder urges the bottom of a can in the inner cylinder into engagement with the piercing device in the bottom of the inner cylinder to form an opening in the can bottom, thereby permitting the contents of the can to enter the disposal container.
Aerosol can waste disposal device
O'Brien, M.D.; Klapperick, R.L.; Bell, C.
1993-12-21
Disclosed is a device for removing gases and liquid from containers. The device punctures the bottom of a container for purposes of exhausting gases and liquid from the container without their escaping into the atmosphere. The device includes an inner cup or cylinder having a top portion with an open end for receiving a container and a bottom portion which may be fastened to a disposal or waste container in a substantially leak-proof manner. A piercing device is mounted in the lower portion of the inner cylinder for puncturing the can bottom placed in the inner cylinder. An outer cylinder having an open end and a closed end fits over the top portion of the inner cylinder in telescoping engagement. A force exerted on the closed end of the outer cylinder urges the bottom of a can in the inner cylinder into engagement with the piercing device in the bottom of the inner cylinder to form an opening in the can bottom, thereby permitting the contents of the can to enter the disposal container. 7 figures.
Zaspel, Jennifer M; Scott, Clare H; Hill, Sharon R; Ignell, Rickard; Kononenko, Vladimir S; Weller, Susan J
2014-10-01
Facultative blood feeding on live animals or carrion is widespread within Lepidoptera. Male moths within the genus Calyptra are known to use their fruit-piercing mouthparts to occasionally feed on mammalian blood. The Palearctic species Calyptra thalictri is known to exhibit differential feeding behaviors that appear to be based on geographic location. This species is known to pierce fruit throughout its range but has recently been reported to also feed on human blood under experimental conditions in the Russian Far East. Here we document the distribution of this widespread species, reconstruct its evolutionary history, and calculate its genetic diversity for the first time. Recently collected samples are combined with museum specimens to model suitable environments for this taxon. Our findings suggest that while the blood-feeding populations are not monophyletic, there is geographical structure. Our analysis of macroclimate variables suggests that altitude and precipitation are the environmental variables most critical to habitat suitability in this lineage.
Biocompatible polymer microneedle for topical/dermal delivery of tranexamic acid.
A Machekposhti, S; Soltani, M; Najafizadeh, P; Ebrahimi, S A; Chen, P
2017-09-10
Recently-introduced biocompatible polymeric microneedles offer an efficient method for drug delivery. Tranexamic acid is a novel drug for treating melasma that is administered both locally and orally and inhibits excessive melanin via melanocyte. The tranexamic acid biocompatible polymer microneedle used in this study was fabricated from PVP and methacrylic acid, using the lithography method. The required mechanical strength to pierce skin was attained by optimizing the ratio of PVP to methacrylic acid. Acute dermal toxicity was done, and drug diffusion in skin layers was simulated by calculating the diffusion coefficient of tranexamic acid in interstitial fluid (plasma). The biocompatible polymer microneedle was fabricated at 60°C. Needles could sustain 0.6N that is enough to pierce stratum corneum. 34% of the released drug was locally effective and the rest permeated through the skin. The pyramidal polymer microneedle in this study was fully released in skin in approx. 7h. This polymer microneedle has no dermal toxicity. Copyright © 2017 Elsevier B.V. All rights reserved.
A dendrite-suppressing composite ion conductor from aramid nanofibres
NASA Astrophysics Data System (ADS)
Tung, Siu-On; Ho, Szushen; Yang, Ming; Zhang, Ruilin; Kotov, Nicholas A.
2015-01-01
Dendrite growth threatens the safety of batteries by piercing the ion-transporting separators between the cathode and anode. Finding a dendrite-suppressing material that combines high modulus and high ionic conductance has long been considered a major technological and materials science challenge. Here we demonstrate that these properties can be attained in a composite made from Kevlar-derived aramid nanofibres assembled in a layer-by-layer manner with poly(ethylene oxide). Importantly, the porosity of the membranes is smaller than the growth area of the dendrites so that aramid nanofibres eliminate ‘weak links’ where the dendrites pierce the membranes. The aramid nanofibre network suppresses poly(ethylene oxide) crystallization detrimental for ion transport, giving a composite that exhibits high modulus, ionic conductivity, flexibility, ion flux rates and thermal stability. Successful suppression of hard copper dendrites by the composite ion conductor at extreme discharge conditions is demonstrated, thereby providing a new approach for the materials engineering of solid ion conductors.
Microdynamics of the piezo-driven pipettes in ICSI.
Ediz, Kerem; Olgac, Nejat
2004-07-01
Undesirably low success rates have been reported in the intracytoplasmic sperm injection procedure. Recently a method using piezo-driven pipettes with a very small mercury column contributed substantial improvements in this process. Despite the toxicity of mercury, this new procedure is commonly utilized in many laboratories. However, there is no study available to date on the micromechanics of this procedure. The underlying principles of piercing are not clear for both cases, with and without the mercury. Presently, the pressure burst, which is caused by the abrupt axial motion of the mercury column, is attributed to this effect. Here, we take the mercury-filled pipettes and try to understand the governing physics. The findings point out the occurrence of considerable lateral tip oscillations of the injection pipette as the piezoelectric pulse train is introduced. We claim that the lateral dynamics play an important role in the piercing and should be considered to enlighten the process and the effects of the mercury. These claims are analytically studied and experimentally verified.
Beauty and the burn: tanning and other appearance-altering attitudes and behaviors.
Gillen, Meghan M; Markey, Charlotte H
2017-12-01
Tanning is often prompted by appearance concerns, yet little is known about associations between tanning and other appearance-altering behaviors. In the current study, we examined potential correlates of indoor and outdoor tanning that, like tanning, may enhance appearance but present health risks. College students (N = 284; Mage = 20.14, SD = 3.39) completed a survey. The main outcome measures were indoor tanning and outdoor sunbathing. Participants also answered questions pertaining to piercings and tattoos, healthy and unhealthy dieting behaviors, cigarette smoking, and interest in cosmetic surgery and enhancements. Results indicate that indoor tanners were more likely to have piercings, tattoos, to engage in healthy dieting behaviors, and to express interest in cosmetic enhancements. Outdoor sunbathers were more interested in cosmetic enhancements than non-outdoor sunbathers, and female outdoor sunbathers reported more unhealthy dieting behaviors than male outdoor sunbathers. These findings provide evidence for college students' engagement in a constellation of appearance-oriented risk behaviors.
NASA Astrophysics Data System (ADS)
Sharma, A. K.; Gurav, O. B.; Gaikwad, H. P.; Chavan, G. A.; Nade, D. P.; Nikte, S. S.; Ghodpage, R. N.; Patil, P. T.
2018-04-01
The nightglow observations of OI 630.0 nm emission carried out from low latitude station Kolhapur using All Sky Imager (ASI) with 140° field of view (FOV) for the month of April 2011 are used. The images were processed to study the field aligned irregularities often called as equatorial plasma bubbles (EPBs). The present study focuses on the occurrence of scintillation during the traversal of EPBs over ionospheric pierce point (IPP). Here we dealt with the depletion level (depth) of the EPB structures and its effect on VHF signals. We compared VHF scintillation data with airglow intensities at Ionospheric pierce point (IPP) from the same location and found that the largely depleted EPBs make stronger scintillation. From previous literature, it is believed that the small scale structures are present near the steeper walls of EPBs which often degrades the communication, the analysis presented in this paper confirms this belief.
30 CFR 57.7052 - Drilling positions.
Code of Federal Regulations, 2010 CFR
2010-07-01
... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Drilling positions. 57.7052 Section 57.7052... SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-UNDERGROUND METAL AND NONMETAL MINES Drilling and Rotary Jet Piercing Drilling-Surface and Underground § 57.7052 Drilling positions. Persons shall not drill...
Glass transition temperatures of liquid prepolymers obtained by thermal penetrometry
NASA Technical Reports Server (NTRS)
Potts, J. E., Jr.; Ashcraft, A. C.
1973-01-01
Thermal penetrometry is experimental technique for detecting temperature at which frozen prepolymer becomes soft enough to be pierced by weighted penetrometer needle; temperature at which this occurs is called penetration temperature. Apparatus used to obtain penetration temperatures can be set up largely from standard parts.
75 FR 61512 - Outer Continental Shelf Official Protraction Diagrams
Federal Register 2010, 2011, 2012, 2013, 2014
2010-10-05
..., 2008 NG17-10 (Dry Tortugas)--April 1, 2008 NG17-11 (Key West)--April 1, 2008 NH17-02 (Brunswick)--April.../Date NG17-02 (Ft. Pierce)--April 1, 2008 NG17-03 (Walker Cay)--April 1, 2008 NG17-05 (West Palm Beach...
30 CFR 57.7052 - Drilling positions.
Code of Federal Regulations, 2014 CFR
2014-07-01
... 30 Mineral Resources 1 2014-07-01 2014-07-01 false Drilling positions. 57.7052 Section 57.7052... SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-UNDERGROUND METAL AND NONMETAL MINES Drilling and Rotary Jet Piercing Drilling-Surface and Underground § 57.7052 Drilling positions. Persons shall not drill...
30 CFR 57.7052 - Drilling positions.
Code of Federal Regulations, 2011 CFR
2011-07-01
... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Drilling positions. 57.7052 Section 57.7052... SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-UNDERGROUND METAL AND NONMETAL MINES Drilling and Rotary Jet Piercing Drilling-Surface and Underground § 57.7052 Drilling positions. Persons shall not drill...
30 CFR 57.7052 - Drilling positions.
Code of Federal Regulations, 2013 CFR
2013-07-01
... 30 Mineral Resources 1 2013-07-01 2013-07-01 false Drilling positions. 57.7052 Section 57.7052... SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-UNDERGROUND METAL AND NONMETAL MINES Drilling and Rotary Jet Piercing Drilling-Surface and Underground § 57.7052 Drilling positions. Persons shall not drill...
30 CFR 57.7052 - Drilling positions.
Code of Federal Regulations, 2012 CFR
2012-07-01
... 30 Mineral Resources 1 2012-07-01 2012-07-01 false Drilling positions. 57.7052 Section 57.7052... SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-UNDERGROUND METAL AND NONMETAL MINES Drilling and Rotary Jet Piercing Drilling-Surface and Underground § 57.7052 Drilling positions. Persons shall not drill...
ERIC Educational Resources Information Center
Zeiher, Lynne
2006-01-01
This article features the Pierce County Library System (PCLS) in Tacoma, where new services are changing the way customers experience the library. PCLS is comprised of 17 branches, two bookmobiles, one Explorer Kid's bookmobile, serves 509,000 people, and has 234,000 cardholders. The evolution of customer expectations and needs motivated the…
78 FR 62364 - Sunshine Act Meeting
Federal Register 2010, 2011, 2012, 2013, 2014
2013-10-21
... names of two offshore companies he controlled (the ``Corporate Accounts''). The law judge ordered Pierce... provisions of the Government in the Sunshine Act, Public Law 94-409, that the Securities and Exchange... initial decision of an administrative law judge. The law judge found that China-Biotics, Inc., an issuer...
Teaching Mands for Information Using "When" to Children with Autism
ERIC Educational Resources Information Center
Landa, Robin K.; Hansen, Bethany; Shillingsburg, M. Alice
2017-01-01
Previous research has evaluated contrived motivating operations to teach mands for information. However, literature evaluating acquisition of the mand "when?" is comparatively limited. As an extension of Shillingsburg, Bowen, Valentino, & Pierce (2014), we taught three children with autism to engage in mands for information using…
Overview of history, principles, and applications of electropenetrography (EPG) for feeding studies
USDA-ARS?s Scientific Manuscript database
Studying real-time feeding, host injury, and/or transmission of plant pathogens by heteropterans is challenging. Piercing-sucking mouthparts are probed into opaque plant tissues, precluding direct observation. Over fifty years ago, this challenge was overcome for tiny hemipterans like aphids, by the...
Propagation of Homalodisca Coagulata Virus-01 via Homalodisca Vitripennis cell culture
USDA-ARS?s Scientific Manuscript database
The glassy-winged sharpshooter (Homalodisca vitripennis) is a highly vagile and polyphagous insect found throughout the southwestern United States. These insects are the predominant vectors of Xylella fastidiosa, a xylem-limited bacterium that is the causal agent of Pierce's disease (PD) of grapevin...
A New SAS program for behavioral analysis of electrical penetration graph data
USDA-ARS?s Scientific Manuscript database
Monitoring feeding behaviors of insects whose piercing-sucking mouthparts are inserted into plant tissue is done by making the insect part of an electronic circuit, using electropenetrography (EPG). Fluctuating voltage signals in the circuit are graphed, and resulting waveforms are interpreted as sp...
35. Photo of concrete arch culvert constructed by Puget Sound ...
35. Photo of concrete arch culvert constructed by Puget Sound Construction Company, 1911, for the Northern Pacific Railroad, over flume. Photo by Brian C. Morris, Puget Power, 1989. - Puget Sound Power & Light Company, White River Hydroelectric Project, 600 North River Avenue, Dieringer, Pierce County, WA
Smithsonian Marine Station at Fort Pierce Website Search Box Search Field: SMS Website Search Search Submit: Submit Advanced Search IRLSI Home Search the Inventory The IRL Stewardship IRL Photo Institution Privacy SMS Home Contact Us Search NMNH Home DCSIMG
SOURCES OF INDOOR AIR CONTAMINANTS: CHARACTERIZING EMISSIONS AND HEALTH EFFECTS
This document consists of the Preface, Chapter 1. Introduction, Chapter 6. Conclusion, and References relating to an October 1990 conference at the John B. Pierce Laboratory and Yale University, New Haven, CT.
The purpose of a May 1985 international conference on indoor s...
Herbivore exploits chink in armor of host
USDA-ARS?s Scientific Manuscript database
Mites in the genus Raoiella Hirst are obligate plant parasites that feed via stylet-like mouthparts adapted to pierce plant tissues. A species of particular interest in this genus, the red palm mite, R. indica Hirst, is currently spreading aggressively throughout the Americas on species of palm (Ar...
India, '95. Fulbright-Hays Summer Seminar Abroad Project 1997.
ERIC Educational Resources Information Center
Johnson, Cheryl
This paper describes benefits gained from a Fulbright-Hays summer study program to India. Included are examples of classroom materials used to teach classes about Indian folk art: puppets, silhouettes, surface embellishment (body ornamentation) including pierced design, visual communication pins, and T-shirt logos. (EH)
Assessing the Legality of State Tournament Bans in Interscholastic Athletics
ERIC Educational Resources Information Center
Scott, Beau
2017-01-01
State high school athletic associations are tasked with facilitating equitable athletic opportunities for all member schools. To accomplish this task, state associations implement rules designed to ensure competitive balance (Johnson, Tracy, & Pierce, 2015). With over 7.8 million participants, interscholastic athletics are extremely popular…
... needing surgery if you want to close the hole. Tattoos top How about henna? You may have seen temporary tattoos that an artist paints on using a dye like henna. These can cause an allergic reaction even a couple of weeks later. Black henna can cause dangerous reactions in some people. ...
Federal Register 2010, 2011, 2012, 2013, 2014
2010-12-10
... Order 216, 48 FR 34794, 08/01/83) and expanded on April 3, 1985 (Board Order 292, 50 FR 15206, 04/17/85... area under the ASF would be Pierce County, Washington, as described in the application. If approved...
Federal Register 2010, 2011, 2012, 2013, 2014
2011-09-20
..., Pierce (north of U.S. Route 20), and Thurston Counties. In South Dakota: Bounded on the North by State...). Designation in the specified geographic areas is for the period beginning April 1, 2012, and ending March 31...
Protein Localization in Silica Nanospheres Derived via Biomimetic Mineralization (POSTPRINT)
2010-01-01
lyse the cell wall of the bac- terial strain Micrococcus lysodeikticus demonstrating that its native hydrolase activity is retained. The K m (M) for...manufacturer’s instructions (Pierce, Rockford, IL). Lysozyme activity assays were performed with Micrococcus lysodeikticus cells according to the supplier’s
30 CFR 57.7012 - Tending drills in operation.
Code of Federal Regulations, 2010 CFR
2010-07-01
... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Tending drills in operation. 57.7012 Section 57... MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-UNDERGROUND METAL AND NONMETAL MINES Drilling and Rotary Jet Piercing Drilling-Surface Only § 57.7012 Tending drills in operation. While in operation...
30 CFR 57.7009 - Drill helpers.
Code of Federal Regulations, 2010 CFR
2010-07-01
... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Drill helpers. 57.7009 Section 57.7009 Mineral... HEALTH SAFETY AND HEALTH STANDARDS-UNDERGROUND METAL AND NONMETAL MINES Drilling and Rotary Jet Piercing Drilling-Surface Only § 57.7009 Drill helpers. If a drill helper assists the drill operator during movement...
30 CFR 56.7003 - Drill area inspection.
Code of Federal Regulations, 2010 CFR
2010-07-01
... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Drill area inspection. 56.7003 Section 56.7003... SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-SURFACE METAL AND NONMETAL MINES Drilling and Rotary Jet Piercing Drilling § 56.7003 Drill area inspection. The drilling area shall be inspected for hazards before...
30 CFR 56.7012 - Tending drills in operation.
Code of Federal Regulations, 2010 CFR
2010-07-01
... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Tending drills in operation. 56.7012 Section 56... MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-SURFACE METAL AND NONMETAL MINES Drilling and Rotary Jet Piercing Drilling § 56.7012 Tending drills in operation. While in operation, drills shall be...
30 CFR 57.7003 - Drill area inspection.
Code of Federal Regulations, 2010 CFR
2010-07-01
... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Drill area inspection. 57.7003 Section 57.7003... SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-UNDERGROUND METAL AND NONMETAL MINES Drilling and Rotary Jet Piercing Drilling-Surface Only § 57.7003 Drill area inspection. The drilling area shall be...
30 CFR 57.7054 - Starting or moving drill equipment.
Code of Federal Regulations, 2010 CFR
2010-07-01
... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Starting or moving drill equipment. 57.7054... NONMETAL MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-UNDERGROUND METAL AND NONMETAL MINES Drilling and Rotary Jet Piercing Drilling-Surface and Underground § 57.7054 Starting or moving drill equipment...
30 CFR 57.7013 - Covering or guarding drill holes.
Code of Federal Regulations, 2010 CFR
2010-07-01
... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Covering or guarding drill holes. 57.7013... NONMETAL MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-UNDERGROUND METAL AND NONMETAL MINES Drilling and Rotary Jet Piercing Drilling-Surface Only § 57.7013 Covering or guarding drill holes. Drill holes...
30 CFR 57.7053 - Moving hand-held drills.
Code of Federal Regulations, 2010 CFR
2010-07-01
... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Moving hand-held drills. 57.7053 Section 57... MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-UNDERGROUND METAL AND NONMETAL MINES Drilling and Rotary Jet Piercing Drilling-Surface and Underground § 57.7053 Moving hand-held drills. Before hand-held...
30 CFR 56.7009 - Drill helpers.
Code of Federal Regulations, 2010 CFR
2010-07-01
... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Drill helpers. 56.7009 Section 56.7009 Mineral... HEALTH SAFETY AND HEALTH STANDARDS-SURFACE METAL AND NONMETAL MINES Drilling and Rotary Jet Piercing Drilling § 56.7009 Drill helpers. If a drill helper assists the drill operator during movement of a drill...
30 CFR 56.7052 - Drilling positions.
Code of Federal Regulations, 2010 CFR
2010-07-01
... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Drilling positions. 56.7052 Section 56.7052... SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-SURFACE METAL AND NONMETAL MINES Drilling and Rotary Jet Piercing Drilling § 56.7052 Drilling positions. Persons shall not drill from— (a) Positions which hinder...
USDA-ARS?s Scientific Manuscript database
The glassy-winged sharpshooter (GWSS), Homalodisca vitripennis (Germar) (Hemiptera: Cicadellidae), is an important vector of Xylella fastidiosa, the bacterium that causes Pierce's disease of grapevine and is a threat to grape production throughout the United States. Female GWSS deposit egg masses be...
Easing the Transition from Preschool to Kindergarten.
ERIC Educational Resources Information Center
Waxler, Trellis; And Others
1990-01-01
Describes two Head Start projects designed to make the transition from preschool to kindergarten less stressful for Head Start children and their families. Programs are the Mille Lacs Reservation Head Start program in Minnesota and the East Coast Migrant Head Start project in Fort Pierce, Florida. Project evaluations are summarized. (BB)
46 CFR 32.65-20 - Pumprooms-TB/ALL.
Code of Federal Regulations, 2011 CFR
2011-10-01
... bulkhead between the pumproom and the pump-engine compartment may be pierced by fixed lights, drive shaft and pump-engine control rods, provided that the shafts and rods are fitted with stuffing boxes where... their cargo pumps isolated from all sources of vapor ignition by gastight bulkheads. Totally enclosed...
46 CFR 32.65-20 - Pumprooms-TB/ALL.
Code of Federal Regulations, 2013 CFR
2013-10-01
... bulkhead between the pumproom and the pump-engine compartment may be pierced by fixed lights, drive shaft and pump-engine control rods, provided that the shafts and rods are fitted with stuffing boxes where... their cargo pumps isolated from all sources of vapor ignition by gastight bulkheads. Totally enclosed...
46 CFR 32.65-20 - Pumprooms-TB/ALL.
Code of Federal Regulations, 2010 CFR
2010-10-01
... bulkhead between the pumproom and the pump-engine compartment may be pierced by fixed lights, drive shaft and pump-engine control rods, provided that the shafts and rods are fitted with stuffing boxes where... their cargo pumps isolated from all sources of vapor ignition by gastight bulkheads. Totally enclosed...
46 CFR 32.65-20 - Pumprooms-TB/ALL.
Code of Federal Regulations, 2012 CFR
2012-10-01
... bulkhead between the pumproom and the pump-engine compartment may be pierced by fixed lights, drive shaft and pump-engine control rods, provided that the shafts and rods are fitted with stuffing boxes where... their cargo pumps isolated from all sources of vapor ignition by gastight bulkheads. Totally enclosed...
46 CFR 32.65-20 - Pumprooms-TB/ALL.
Code of Federal Regulations, 2014 CFR
2014-10-01
... bulkhead between the pumproom and the pump-engine compartment may be pierced by fixed lights, drive shaft and pump-engine control rods, provided that the shafts and rods are fitted with stuffing boxes where... their cargo pumps isolated from all sources of vapor ignition by gastight bulkheads. Totally enclosed...
Timber resource statistics for western Washington.
Coffin D. MacLean; Patricia M. Bassett; Glenn Yeary
1992-01-01
This report summarizes a 1988-90 timber resource inventory of 19 counties in western Washington: Clallam, Clark, Cowlitz, Grays Harbor, Island, Jefferson, King, Kitsap, Lewis, Mason, Pacific, Pierce, San Juan, Skagit, Skamania, Snohomish, Thurston, Wahkiakum, and Whatcom. Detailed tables of forest area, timber volume, growth, mortality, and harvest are presented.
30 CFR 56.7055 - Intersecting holes.
Code of Federal Regulations, 2011 CFR
2011-07-01
... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Intersecting holes. 56.7055 Section 56.7055... Piercing Drilling § 56.7055 Intersecting holes. Holes shall not be drilled where there is a danger of intersecting a misfired hole or a hole containing explosives blasting agents, or detonators. [56 FR 46508, Sept...
30 CFR 56.7055 - Intersecting holes.
Code of Federal Regulations, 2012 CFR
2012-07-01
... 30 Mineral Resources 1 2012-07-01 2012-07-01 false Intersecting holes. 56.7055 Section 56.7055... Piercing Drilling § 56.7055 Intersecting holes. Holes shall not be drilled where there is a danger of intersecting a misfired hole or a hole containing explosives blasting agents, or detonators. [56 FR 46508, Sept...
30 CFR 57.7055 - Intersecting holes.
Code of Federal Regulations, 2012 CFR
2012-07-01
... 30 Mineral Resources 1 2012-07-01 2012-07-01 false Intersecting holes. 57.7055 Section 57.7055... Jet Piercing Drilling-Surface and Underground § 57.7055 Intersecting holes. Holes shall not be drilled where there is a danger of intersecting a misfired hole or a hole containing explosives, blasting agents...
30 CFR 57.7055 - Intersecting holes.
Code of Federal Regulations, 2014 CFR
2014-07-01
... 30 Mineral Resources 1 2014-07-01 2014-07-01 false Intersecting holes. 57.7055 Section 57.7055... Jet Piercing Drilling-Surface and Underground § 57.7055 Intersecting holes. Holes shall not be drilled where there is a danger of intersecting a misfired hole or a hole containing explosives, blasting agents...
30 CFR 56.7055 - Intersecting holes.
Code of Federal Regulations, 2013 CFR
2013-07-01
... 30 Mineral Resources 1 2013-07-01 2013-07-01 false Intersecting holes. 56.7055 Section 56.7055... Piercing Drilling § 56.7055 Intersecting holes. Holes shall not be drilled where there is a danger of intersecting a misfired hole or a hole containing explosives blasting agents, or detonators. [56 FR 46508, Sept...
30 CFR 57.7055 - Intersecting holes.
Code of Federal Regulations, 2011 CFR
2011-07-01
... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Intersecting holes. 57.7055 Section 57.7055... Jet Piercing Drilling-Surface and Underground § 57.7055 Intersecting holes. Holes shall not be drilled where there is a danger of intersecting a misfired hole or a hole containing explosives, blasting agents...
30 CFR 57.7055 - Intersecting holes.
Code of Federal Regulations, 2013 CFR
2013-07-01
... 30 Mineral Resources 1 2013-07-01 2013-07-01 false Intersecting holes. 57.7055 Section 57.7055... Jet Piercing Drilling-Surface and Underground § 57.7055 Intersecting holes. Holes shall not be drilled where there is a danger of intersecting a misfired hole or a hole containing explosives, blasting agents...
30 CFR 56.7055 - Intersecting holes.
Code of Federal Regulations, 2014 CFR
2014-07-01
... 30 Mineral Resources 1 2014-07-01 2014-07-01 false Intersecting holes. 56.7055 Section 56.7055... Piercing Drilling § 56.7055 Intersecting holes. Holes shall not be drilled where there is a danger of intersecting a misfired hole or a hole containing explosives blasting agents, or detonators. [56 FR 46508, Sept...
ELEVATION OF FACILITY 667 WITH GRADUATED SCALE IN 1' INCREMENTS. ...
ELEVATION OF FACILITY 667 WITH GRADUATED SCALE IN 1' INCREMENTS. NOTE: THE TORPEDO IN THE FOREGROUND IS A DISPLAY ASSOCIATED WITH FACILITY 683. VIEW FACING NORTHEAST - U.S. Naval Base, Pearl Harbor, Gymnasium Building, North Waterfront & Pierce Street near Berth S-13, Pearl City, Honolulu County, HI
VIEW OF THE ROOF TRUSSES OF THE MEN'S LOCKER ROOM. ...
VIEW OF THE ROOF TRUSSES OF THE MEN'S LOCKER ROOM. NOTE THE WIDENED BAND OF VENTILATION SECREENING TO THE OUTSIDE AT THE EAVES (LEFT). VIEW FACING NORTHEAST - U.S. Naval Base, Pearl Harbor, Gymnasium Building, North Waterfront & Pierce Street near Berth S-13, Pearl City, Honolulu County, HI
49 CFR 178.35 - General requirements for specification cylinders.
Code of Federal Regulations, 2011 CFR
2011-10-01
... cylinders made by the billet-piercing process, billets must be inspected and shown to be free from pipe... specific construction design.); (v) Witnessing all tests; (vi) Verify threads by gauge; (vii) Reporting... certifies that the processes of manufacture and heat treatment of cylinders were observed and found...
49 CFR 178.35 - General requirements for specification cylinders.
Code of Federal Regulations, 2014 CFR
2014-10-01
... cylinders made by the billet-piercing process, billets must be inspected and shown to be free from pipe... specific construction design.); (v) Witnessing all tests; (vi) Verify threads by gauge; (vii) Reporting... certifies that the processes of manufacture and heat treatment of cylinders were observed and found...
49 CFR 178.35 - General requirements for specification cylinders.
Code of Federal Regulations, 2013 CFR
2013-10-01
... cylinders made by the billet-piercing process, billets must be inspected and shown to be free from pipe... specific construction design.); (v) Witnessing all tests; (vi) Verify threads by gauge; (vii) Reporting... certifies that the processes of manufacture and heat treatment of cylinders were observed and found...
49 CFR 178.35 - General requirements for specification cylinders.
Code of Federal Regulations, 2010 CFR
2010-10-01
... cylinders made by the billet-piercing process, billets must be inspected and shown to be free from pipe... specific construction design.); (v) Witnessing all tests; (vi) Verify threads by gauge; (vii) Reporting... finished cylinder has been welded by the spinning process, or effected by plugging. (ii) As prescribed in...
49 CFR 178.35 - General requirements for specification cylinders.
Code of Federal Regulations, 2012 CFR
2012-10-01
... cylinders made by the billet-piercing process, billets must be inspected and shown to be free from pipe... specific construction design.); (v) Witnessing all tests; (vi) Verify threads by gauge; (vii) Reporting... certifies that the processes of manufacture and heat treatment of cylinders were observed and found...
4. Corridor B. Perspective of west side as viewed from ...
4. Corridor B. Perspective of west side as viewed from roof of Building No. 9982. The flat-roof building that joins Corridor B is Building No. 9981, Receiving and Evacuation Building. - Madigan Hospital, Corridors & Ramps, Bounded by Wilson & McKinley Avenues & Garfield & Lincoln Streets, Tacoma, Pierce County, WA
3. Ramp No. 6 connection between Medical Detachment Barracks: Building ...
3. Ramp No. 6 connection between Medical Detachment Barracks: Building Nos. 9970-B (left) and 9969-B (right). The many windows makes this section almost unique among the ramps and corridors. - Madigan Hospital, Corridors & Ramps, Bounded by Wilson & McKinley Avenues & Garfield & Lincoln Streets, Tacoma, Pierce County, WA
30 CFR 57.7003 - Drill area inspection.
Code of Federal Regulations, 2011 CFR
2011-07-01
... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Drill area inspection. 57.7003 Section 57.7003... SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-UNDERGROUND METAL AND NONMETAL MINES Drilling and Rotary Jet Piercing Drilling-Surface Only § 57.7003 Drill area inspection. The drilling area shall be...
30 CFR 56.7009 - Drill helpers.
Code of Federal Regulations, 2012 CFR
2012-07-01
... 30 Mineral Resources 1 2012-07-01 2012-07-01 false Drill helpers. 56.7009 Section 56.7009 Mineral... HEALTH SAFETY AND HEALTH STANDARDS-SURFACE METAL AND NONMETAL MINES Drilling and Rotary Jet Piercing Drilling § 56.7009 Drill helpers. If a drill helper assists the drill operator during movement of a drill...
30 CFR 56.7012 - Tending drills in operation.
Code of Federal Regulations, 2014 CFR
2014-07-01
... 30 Mineral Resources 1 2014-07-01 2014-07-01 false Tending drills in operation. 56.7012 Section 56... MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-SURFACE METAL AND NONMETAL MINES Drilling and Rotary Jet Piercing Drilling § 56.7012 Tending drills in operation. While in operation, drills shall be...
30 CFR 56.7052 - Drilling positions.
Code of Federal Regulations, 2013 CFR
2013-07-01
... 30 Mineral Resources 1 2013-07-01 2013-07-01 false Drilling positions. 56.7052 Section 56.7052... SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-SURFACE METAL AND NONMETAL MINES Drilling and Rotary Jet Piercing Drilling § 56.7052 Drilling positions. Persons shall not drill from— (a) Positions which hinder...
30 CFR 57.7009 - Drill helpers.
Code of Federal Regulations, 2011 CFR
2011-07-01
... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Drill helpers. 57.7009 Section 57.7009 Mineral... HEALTH SAFETY AND HEALTH STANDARDS-UNDERGROUND METAL AND NONMETAL MINES Drilling and Rotary Jet Piercing Drilling-Surface Only § 57.7009 Drill helpers. If a drill helper assists the drill operator during movement...
30 CFR 57.7054 - Starting or moving drill equipment.
Code of Federal Regulations, 2013 CFR
2013-07-01
... 30 Mineral Resources 1 2013-07-01 2013-07-01 false Starting or moving drill equipment. 57.7054... NONMETAL MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-UNDERGROUND METAL AND NONMETAL MINES Drilling and Rotary Jet Piercing Drilling-Surface and Underground § 57.7054 Starting or moving drill equipment...
30 CFR 57.7013 - Covering or guarding drill holes.
Code of Federal Regulations, 2011 CFR
2011-07-01
... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Covering or guarding drill holes. 57.7013... NONMETAL MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-UNDERGROUND METAL AND NONMETAL MINES Drilling and Rotary Jet Piercing Drilling-Surface Only § 57.7013 Covering or guarding drill holes. Drill holes...
30 CFR 57.7054 - Starting or moving drill equipment.
Code of Federal Regulations, 2014 CFR
2014-07-01
... 30 Mineral Resources 1 2014-07-01 2014-07-01 false Starting or moving drill equipment. 57.7054... NONMETAL MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-UNDERGROUND METAL AND NONMETAL MINES Drilling and Rotary Jet Piercing Drilling-Surface and Underground § 57.7054 Starting or moving drill equipment...
30 CFR 57.7054 - Starting or moving drill equipment.
Code of Federal Regulations, 2012 CFR
2012-07-01
... 30 Mineral Resources 1 2012-07-01 2012-07-01 false Starting or moving drill equipment. 57.7054... NONMETAL MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-UNDERGROUND METAL AND NONMETAL MINES Drilling and Rotary Jet Piercing Drilling-Surface and Underground § 57.7054 Starting or moving drill equipment...
30 CFR 56.7009 - Drill helpers.
Code of Federal Regulations, 2011 CFR
2011-07-01
... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Drill helpers. 56.7009 Section 56.7009 Mineral... HEALTH SAFETY AND HEALTH STANDARDS-SURFACE METAL AND NONMETAL MINES Drilling and Rotary Jet Piercing Drilling § 56.7009 Drill helpers. If a drill helper assists the drill operator during movement of a drill...
30 CFR 56.7012 - Tending drills in operation.
Code of Federal Regulations, 2012 CFR
2012-07-01
... 30 Mineral Resources 1 2012-07-01 2012-07-01 false Tending drills in operation. 56.7012 Section 56... MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-SURFACE METAL AND NONMETAL MINES Drilling and Rotary Jet Piercing Drilling § 56.7012 Tending drills in operation. While in operation, drills shall be...
30 CFR 57.7009 - Drill helpers.
Code of Federal Regulations, 2013 CFR
2013-07-01
... 30 Mineral Resources 1 2013-07-01 2013-07-01 false Drill helpers. 57.7009 Section 57.7009 Mineral... HEALTH SAFETY AND HEALTH STANDARDS-UNDERGROUND METAL AND NONMETAL MINES Drilling and Rotary Jet Piercing Drilling-Surface Only § 57.7009 Drill helpers. If a drill helper assists the drill operator during movement...
30 CFR 56.7003 - Drill area inspection.
Code of Federal Regulations, 2012 CFR
2012-07-01
... 30 Mineral Resources 1 2012-07-01 2012-07-01 false Drill area inspection. 56.7003 Section 56.7003... SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-SURFACE METAL AND NONMETAL MINES Drilling and Rotary Jet Piercing Drilling § 56.7003 Drill area inspection. The drilling area shall be inspected for hazards before...
30 CFR 56.7012 - Tending drills in operation.
Code of Federal Regulations, 2011 CFR
2011-07-01
... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Tending drills in operation. 56.7012 Section 56... MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-SURFACE METAL AND NONMETAL MINES Drilling and Rotary Jet Piercing Drilling § 56.7012 Tending drills in operation. While in operation, drills shall be...
30 CFR 57.7003 - Drill area inspection.
Code of Federal Regulations, 2014 CFR
2014-07-01
... 30 Mineral Resources 1 2014-07-01 2014-07-01 false Drill area inspection. 57.7003 Section 57.7003... SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-UNDERGROUND METAL AND NONMETAL MINES Drilling and Rotary Jet Piercing Drilling-Surface Only § 57.7003 Drill area inspection. The drilling area shall be...
30 CFR 57.7054 - Starting or moving drill equipment.
Code of Federal Regulations, 2011 CFR
2011-07-01
... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Starting or moving drill equipment. 57.7054... NONMETAL MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-UNDERGROUND METAL AND NONMETAL MINES Drilling and Rotary Jet Piercing Drilling-Surface and Underground § 57.7054 Starting or moving drill equipment...
30 CFR 57.7053 - Moving hand-held drills.
Code of Federal Regulations, 2014 CFR
2014-07-01
... 30 Mineral Resources 1 2014-07-01 2014-07-01 false Moving hand-held drills. 57.7053 Section 57... MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-UNDERGROUND METAL AND NONMETAL MINES Drilling and Rotary Jet Piercing Drilling-Surface and Underground § 57.7053 Moving hand-held drills. Before hand-held...
30 CFR 56.7003 - Drill area inspection.
Code of Federal Regulations, 2014 CFR
2014-07-01
... 30 Mineral Resources 1 2014-07-01 2014-07-01 false Drill area inspection. 56.7003 Section 56.7003... SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-SURFACE METAL AND NONMETAL MINES Drilling and Rotary Jet Piercing Drilling § 56.7003 Drill area inspection. The drilling area shall be inspected for hazards before...
30 CFR 57.7012 - Tending drills in operation.
Code of Federal Regulations, 2014 CFR
2014-07-01
... 30 Mineral Resources 1 2014-07-01 2014-07-01 false Tending drills in operation. 57.7012 Section 57... MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-UNDERGROUND METAL AND NONMETAL MINES Drilling and Rotary Jet Piercing Drilling-Surface Only § 57.7012 Tending drills in operation. While in operation...
30 CFR 57.7012 - Tending drills in operation.
Code of Federal Regulations, 2013 CFR
2013-07-01
... 30 Mineral Resources 1 2013-07-01 2013-07-01 false Tending drills in operation. 57.7012 Section 57... MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-UNDERGROUND METAL AND NONMETAL MINES Drilling and Rotary Jet Piercing Drilling-Surface Only § 57.7012 Tending drills in operation. While in operation...
30 CFR 56.7009 - Drill helpers.
Code of Federal Regulations, 2013 CFR
2013-07-01
... 30 Mineral Resources 1 2013-07-01 2013-07-01 false Drill helpers. 56.7009 Section 56.7009 Mineral... HEALTH SAFETY AND HEALTH STANDARDS-SURFACE METAL AND NONMETAL MINES Drilling and Rotary Jet Piercing Drilling § 56.7009 Drill helpers. If a drill helper assists the drill operator during movement of a drill...
30 CFR 56.7052 - Drilling positions.
Code of Federal Regulations, 2011 CFR
2011-07-01
... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Drilling positions. 56.7052 Section 56.7052... SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-SURFACE METAL AND NONMETAL MINES Drilling and Rotary Jet Piercing Drilling § 56.7052 Drilling positions. Persons shall not drill from— (a) Positions which hinder...
30 CFR 56.7052 - Drilling positions.
Code of Federal Regulations, 2014 CFR
2014-07-01
... 30 Mineral Resources 1 2014-07-01 2014-07-01 false Drilling positions. 56.7052 Section 56.7052... SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-SURFACE METAL AND NONMETAL MINES Drilling and Rotary Jet Piercing Drilling § 56.7052 Drilling positions. Persons shall not drill from— (a) Positions which hinder...
30 CFR 56.7003 - Drill area inspection.
Code of Federal Regulations, 2011 CFR
2011-07-01
... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Drill area inspection. 56.7003 Section 56.7003... SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-SURFACE METAL AND NONMETAL MINES Drilling and Rotary Jet Piercing Drilling § 56.7003 Drill area inspection. The drilling area shall be inspected for hazards before...
30 CFR 56.7052 - Drilling positions.
Code of Federal Regulations, 2012 CFR
2012-07-01
... 30 Mineral Resources 1 2012-07-01 2012-07-01 false Drilling positions. 56.7052 Section 56.7052... SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-SURFACE METAL AND NONMETAL MINES Drilling and Rotary Jet Piercing Drilling § 56.7052 Drilling positions. Persons shall not drill from— (a) Positions which hinder...
30 CFR 57.7003 - Drill area inspection.
Code of Federal Regulations, 2013 CFR
2013-07-01
... 30 Mineral Resources 1 2013-07-01 2013-07-01 false Drill area inspection. 57.7003 Section 57.7003... SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-UNDERGROUND METAL AND NONMETAL MINES Drilling and Rotary Jet Piercing Drilling-Surface Only § 57.7003 Drill area inspection. The drilling area shall be...
30 CFR 57.7013 - Covering or guarding drill holes.
Code of Federal Regulations, 2013 CFR
2013-07-01
... 30 Mineral Resources 1 2013-07-01 2013-07-01 false Covering or guarding drill holes. 57.7013... NONMETAL MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-UNDERGROUND METAL AND NONMETAL MINES Drilling and Rotary Jet Piercing Drilling-Surface Only § 57.7013 Covering or guarding drill holes. Drill holes...
30 CFR 57.7003 - Drill area inspection.
Code of Federal Regulations, 2012 CFR
2012-07-01
... 30 Mineral Resources 1 2012-07-01 2012-07-01 false Drill area inspection. 57.7003 Section 57.7003... SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-UNDERGROUND METAL AND NONMETAL MINES Drilling and Rotary Jet Piercing Drilling-Surface Only § 57.7003 Drill area inspection. The drilling area shall be...
30 CFR 57.7012 - Tending drills in operation.
Code of Federal Regulations, 2012 CFR
2012-07-01
... 30 Mineral Resources 1 2012-07-01 2012-07-01 false Tending drills in operation. 57.7012 Section 57... MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-UNDERGROUND METAL AND NONMETAL MINES Drilling and Rotary Jet Piercing Drilling-Surface Only § 57.7012 Tending drills in operation. While in operation...
30 CFR 57.7053 - Moving hand-held drills.
Code of Federal Regulations, 2013 CFR
2013-07-01
... 30 Mineral Resources 1 2013-07-01 2013-07-01 false Moving hand-held drills. 57.7053 Section 57... MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-UNDERGROUND METAL AND NONMETAL MINES Drilling and Rotary Jet Piercing Drilling-Surface and Underground § 57.7053 Moving hand-held drills. Before hand-held...
30 CFR 56.7012 - Tending drills in operation.
Code of Federal Regulations, 2013 CFR
2013-07-01
... 30 Mineral Resources 1 2013-07-01 2013-07-01 false Tending drills in operation. 56.7012 Section 56... MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-SURFACE METAL AND NONMETAL MINES Drilling and Rotary Jet Piercing Drilling § 56.7012 Tending drills in operation. While in operation, drills shall be...
30 CFR 57.7009 - Drill helpers.
Code of Federal Regulations, 2014 CFR
2014-07-01
... 30 Mineral Resources 1 2014-07-01 2014-07-01 false Drill helpers. 57.7009 Section 57.7009 Mineral... HEALTH SAFETY AND HEALTH STANDARDS-UNDERGROUND METAL AND NONMETAL MINES Drilling and Rotary Jet Piercing Drilling-Surface Only § 57.7009 Drill helpers. If a drill helper assists the drill operator during movement...
30 CFR 57.7053 - Moving hand-held drills.
Code of Federal Regulations, 2012 CFR
2012-07-01
... 30 Mineral Resources 1 2012-07-01 2012-07-01 false Moving hand-held drills. 57.7053 Section 57... MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-UNDERGROUND METAL AND NONMETAL MINES Drilling and Rotary Jet Piercing Drilling-Surface and Underground § 57.7053 Moving hand-held drills. Before hand-held...
30 CFR 57.7012 - Tending drills in operation.
Code of Federal Regulations, 2011 CFR
2011-07-01
... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Tending drills in operation. 57.7012 Section 57... MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-UNDERGROUND METAL AND NONMETAL MINES Drilling and Rotary Jet Piercing Drilling-Surface Only § 57.7012 Tending drills in operation. While in operation...
30 CFR 57.7053 - Moving hand-held drills.
Code of Federal Regulations, 2011 CFR
2011-07-01
... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Moving hand-held drills. 57.7053 Section 57... MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-UNDERGROUND METAL AND NONMETAL MINES Drilling and Rotary Jet Piercing Drilling-Surface and Underground § 57.7053 Moving hand-held drills. Before hand-held...
30 CFR 56.7009 - Drill helpers.
Code of Federal Regulations, 2014 CFR
2014-07-01
... 30 Mineral Resources 1 2014-07-01 2014-07-01 false Drill helpers. 56.7009 Section 56.7009 Mineral... HEALTH SAFETY AND HEALTH STANDARDS-SURFACE METAL AND NONMETAL MINES Drilling and Rotary Jet Piercing Drilling § 56.7009 Drill helpers. If a drill helper assists the drill operator during movement of a drill...
30 CFR 57.7013 - Covering or guarding drill holes.
Code of Federal Regulations, 2014 CFR
2014-07-01
... 30 Mineral Resources 1 2014-07-01 2014-07-01 false Covering or guarding drill holes. 57.7013... NONMETAL MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-UNDERGROUND METAL AND NONMETAL MINES Drilling and Rotary Jet Piercing Drilling-Surface Only § 57.7013 Covering or guarding drill holes. Drill holes...
30 CFR 57.7009 - Drill helpers.
Code of Federal Regulations, 2012 CFR
2012-07-01
... 30 Mineral Resources 1 2012-07-01 2012-07-01 false Drill helpers. 57.7009 Section 57.7009 Mineral... HEALTH SAFETY AND HEALTH STANDARDS-UNDERGROUND METAL AND NONMETAL MINES Drilling and Rotary Jet Piercing Drilling-Surface Only § 57.7009 Drill helpers. If a drill helper assists the drill operator during movement...
30 CFR 56.7003 - Drill area inspection.
Code of Federal Regulations, 2013 CFR
2013-07-01
... 30 Mineral Resources 1 2013-07-01 2013-07-01 false Drill area inspection. 56.7003 Section 56.7003... SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-SURFACE METAL AND NONMETAL MINES Drilling and Rotary Jet Piercing Drilling § 56.7003 Drill area inspection. The drilling area shall be inspected for hazards before...
30 CFR 57.7013 - Covering or guarding drill holes.
Code of Federal Regulations, 2012 CFR
2012-07-01
... 30 Mineral Resources 1 2012-07-01 2012-07-01 false Covering or guarding drill holes. 57.7013... NONMETAL MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-UNDERGROUND METAL AND NONMETAL MINES Drilling and Rotary Jet Piercing Drilling-Surface Only § 57.7013 Covering or guarding drill holes. Drill holes...
The Supreme Court, Religion and the Temper of the Times.
ERIC Educational Resources Information Center
Hunt, Thomas C.
1986-01-01
Explores ties between contemporary social issues and Supreme Court decisions during four periods. Considers Meyer v. Nebraska (1923), Pierce v. Society of Sisters (1925), Central School District v. Allen (1968), Lemon v. Kurtzman (1971), Wallace v. Jaffree (1985), Aguilar v. Felton (1985), and other decisions. (DMM)
76. Interior of tunnel intake building, looking east. Detail of ...
76. Interior of tunnel intake building, looking east. Detail of a ca. 1911 General Electric induction motor, 25 horsepower, 60 cycles, 220 volts, 70 amps. Photo by Jet Lowe, HAER, 1989. - Puget Sound Power & Light Company, White River Hydroelectric Project, 600 North River Avenue, Dieringer, Pierce County, WA