An aquatic multiscale assessment and planning framework approach—forest plan revision case study

Treesearch

Kerry Overton; Ann D. Carlson; Cynthia Tait

2010-01-01

The Aquatic Multiscale Assessment and Planning Framework is a Web-based decision-support tool developed to assist aquatic practitioners in managing fisheries and watershed information. This tool, or framework, was designed to assist resource assessments and planning efforts from the broad scale to the fine scale, to document procedures, and to link directly to relevant...

Green Infrastructure Modeling Tools

EPA Pesticide Factsheets

Modeling tools support planning and design decisions on a range of scales from setting a green infrastructure target for an entire watershed to designing a green infrastructure practice for a particular site.

Teachers' Perspectives on Digital Tools for Pedagogic Planning and Design

ERIC Educational Resources Information Center

Masterman, Elizabeth; Manton, Marion

2011-01-01

The authors introduce the concept of design support tools and situate them in the pedagogic context of professional development for technology-enhanced learning (TEL) and the research field of learning design. Through focusing on the development and evaluation of one such tool, Phoebe, they discuss their value to lecturers in post-compulsory…

The Effect of Guided Self-Reflection on Teachers' Technology Use

ERIC Educational Resources Information Center

Farber, Susan

2010-01-01

The purpose of this study was to pilot an instructional planning tool grounded in guided self-reflection on the instructional planning practices and instructional behaviors of a small sample of teachers. I designed the instructional planning tool, which was named the Informed Technology Integration Guide (ITIG). Participants used the instructional…

Design and Implementation of the PMS Module for ’Argos’

DTIC Science & Technology

1989-12-01

designing , and implementing a fully workable Planned Maintenance System (PMS). This implementation demonstrates both the capabilities and benefits such a...analyzing, designing , and implementing a fully workable Planned Maintenance System (PMS). This implementation demonstrates both the capabilities and... design and implementation. PMS is the system developed by the navy to provide each ship, department, and supervisor with the tools needed to plan

Framework for Multidisciplinary Analysis, Design, and Optimization with High-Fidelity Analysis Tools

NASA Technical Reports Server (NTRS)

Orr, Stanley A.; Narducci, Robert P.

2009-01-01

A plan is presented for the development of a high fidelity multidisciplinary optimization process for rotorcraft. The plan formulates individual disciplinary design problems, identifies practical high-fidelity tools and processes that can be incorporated in an automated optimization environment, and establishes statements of the multidisciplinary design problem including objectives, constraints, design variables, and cross-disciplinary dependencies. Five key disciplinary areas are selected in the development plan. These are rotor aerodynamics, rotor structures and dynamics, fuselage aerodynamics, fuselage structures, and propulsion / drive system. Flying qualities and noise are included as ancillary areas. Consistency across engineering disciplines is maintained with a central geometry engine that supports all multidisciplinary analysis. The multidisciplinary optimization process targets the preliminary design cycle where gross elements of the helicopter have been defined. These might include number of rotors and rotor configuration (tandem, coaxial, etc.). It is at this stage that sufficient configuration information is defined to perform high-fidelity analysis. At the same time there is enough design freedom to influence a design. The rotorcraft multidisciplinary optimization tool is built and substantiated throughout its development cycle in a staged approach by incorporating disciplines sequentially.

Application of modern tools and techniques to maximize engineering productivity in the development of orbital operations plans for the space station progrm

NASA Technical Reports Server (NTRS)

Manford, J. S.; Bennett, G. R.

1985-01-01

The Space Station Program will incorporate analysis of operations constraints and considerations in the early design phases to avoid the need for later modifications to the Space Station for operations. The application of modern tools and administrative techniques to minimize the cost of performing effective orbital operations planning and design analysis in the preliminary design phase of the Space Station Program is discussed. Tools and techniques discussed include: approach for rigorous analysis of operations functions, use of the resources of a large computer network, and providing for efficient research and access to information.

Analysis of optoelectronic strategic planning in Taiwan by artificial intelligence portfolio tool

NASA Astrophysics Data System (ADS)

Chang, Rang-Seng

1992-05-01

Taiwan ROC has achieved significant advances in the optoelectronic industry with some Taiwan products ranked high in the world market and technology. Six segmentations of optoelectronic were planned. Each one was divided into several strategic items, design artificial intelligent portfolio tool (AIPT) to analyze the optoelectronic strategic planning in Taiwan. The portfolio is designed to provoke strategic thinking intelligently. This computer- generated strategy should be selected and modified by the individual. Some strategies for the development of the Taiwan optoelectronic industry also are discussed in this paper.

Human factors issues in the design of user interfaces for planning and scheduling

NASA Technical Reports Server (NTRS)

Murphy, Elizabeth D.

1991-01-01

The purpose is to provide and overview of human factors issues that impact the effectiveness of user interfaces to automated scheduling tools. The following methods are employed: (1) a survey of planning and scheduling tools; (2) the identification and analysis of human factors issues; (3) the development of design guidelines based on human factors literature; and (4) the generation of display concepts to illustrate guidelines.

An online planning tool for designing terrace layouts

USDA-ARS?s Scientific Manuscript database

A web-based conservation planning tool, WebTERLOC (web-based Terrace Location Program), was developed to provide multiple terrace layout options using digital elevation model (DEM) and geographic information systems (GIS). Development of a terrace system is complicated by the time-intensive manual ...

Science opportunity analyzer - a multi-mission tool for planning

NASA Technical Reports Server (NTRS)

Streiffert, B. A.; Polanskey, C. A.; O'Reilly, T.; Colwell, J.

2002-01-01

For many years the diverse scientific community that supports JPL's wide variety ofinterplanetary space missions has needed a tool in order to plan and develop their experiments. The tool needs to be easily adapted to various mission types and portable to the user community. The Science Opportunity Analyzer, SOA, now in its third year of development, is intended to meet this need. SOA is a java-based application that is designed to enable scientists to identify and analyze opportunities for science observations from spacecraft. It differs from other planning tools in that it does not require an in-depth knowledge of the spacecraft command system or operation modes to begin high level planning. Users can, however, develop increasingly detailed levels of design. SOA consists of six major functions: Opportunity Search, Visualization, Observation Design, Constraint Checking, Data Output and Communications. Opportunity Search is a GUI driven interface to existing search engines that can be used to identify times when a spacecraft is in a specific geometrical relationship with other bodies in the solar system. This function can be used for advanced mission planning as well as for making last minute adjustments to mission sequences in response to trajectory modifications. Visualization is a key aspect of SOA. The user can view observation opportunities in either a 3D representation or as a 2D map projection. The user is given extensive flexibility to customize what is displayed in the view. Observation Design allows the user to orient the spacecraft and visualize the projection of the instrument field of view for that orientation using the same views as Opportunity Search. Constraint Checking is provided to validate various geometrical and physical aspects of an observation design. The user has the ability to easily create custom rules or to use official project-generated flight rules. This capability may also allow scientists to easily impact the cost to science if flight rule changes occur. Data Output generates information based on the spacecraft's trajectory, opportunity search results or based on a created observation. The data can be viewed either in tabular format or as a graph. Finally, SOA is unique in that it is designed to be able to communicate with a variety of existing planning and sequencing tools. From the very beginning SOA was designed with the user in mind. Extensive surveys of the potential user community were conducted in order to develop the software requirements. Throughout the development period, close ties have been maintained with the science community to insure that the tool maintains its user focus. Although development is still in its early stages, SOA is already developing a user community on the Cassini project, which is depending on this tool for their science planning. There are other tools at JPL that do various pieces of what SOA can do; however, there is no other tool which combines all these functions and presents them to the user in such a convenient, cohesive, and easy to use fashion.

The Internet and managed care: a new wave of innovation.

PubMed

Goldsmith, J

2000-01-01

Managed care firms have been under siege in the political system and the marketplace for the past few years. The rise of the Internet has brought into being powerful new electronic tools for automating administrative and financial processes in health insurance. These tools may enable new firms or employers to create custom-designed networks connecting their workers and providers, bypassing health plans altogether. Alternatively, health plans may use these tools to create a new consumer-focused business model. While some disintermediation of managed care plans may occur, the barriers to adoption of Internet tools by established plans are quite low. Network computing may provide important leverage for health plans not only to retain their franchises but also to improve their profitability and customer service.

Planning Tool for Strategic Evaluation of Facility Plans - 13570

DOE Office of Scientific and Technical Information (OSTI.GOV)

Magoulas, Virginia; Cercy, Michael; Hall, Irin

2013-07-01

Savannah River National Laboratory (SRNL) has developed a strategic planning tool for the evaluation of the utilization of its unique resources for processing and research and development of nuclear materials. The Planning Tool is a strategic level tool for assessing multiple missions that could be conducted utilizing the SRNL facilities and showcasing the plan. Traditional approaches using standard scheduling tools and laying out a strategy on paper tended to be labor intensive and offered either a limited or cluttered view for visualizing and communicating results. A tool that can assess the process throughput, duration, and utilization of the facility wasmore » needed. SRNL teamed with Newport News Shipbuilding (NNS), a division of Huntington Ingalls Industries, to create the next generation Planning Tool. The goal of this collaboration was to create a simulation based tool that allows for quick evaluation of strategies with respect to new or changing missions, and clearly communicates results to the decision makers. This tool has been built upon a mature modeling and simulation software previously developed by NNS. The Planning Tool provides a forum for capturing dependencies, constraints, activity flows, and variable factors. It is also a platform for quickly evaluating multiple mission scenarios, dynamically adding/updating scenarios, generating multiple views for evaluating/communicating results, and understanding where there are areas of risks and opportunities with respect to capacity. The Planning Tool that has been developed is useful in that it presents a clear visual plan for the missions at the Savannah River Site (SRS). It not only assists in communicating the plans to SRS corporate management, but also allows the area stakeholders a visual look at the future plans for SRS. The design of this tool makes it easily deployable to other facility and mission planning endeavors. (authors)« less

Primers-4-Yeast: a comprehensive web tool for planning primers for Saccharomyces cerevisiae.

PubMed

Yofe, Ido; Schuldiner, Maya

2014-02-01

The budding yeast Saccharomyces cerevisiae is a key model organism of functional genomics, due to its ease and speed of genetic manipulations. In fact, in this yeast, the requirement for homologous sequences for recombination purposes is so small that 40 base pairs (bp) are sufficient. Hence, an enormous variety of genetic manipulations can be performed by simply planning primers with the correct homology, using a defined set of transformation plasmids. Although designing primers for yeast transformations and for the verification of their correct insertion is a common task in all yeast laboratories, primer planning is usually done manually and a tool that would enable easy, automated primer planning for the yeast research community is still lacking. Here we introduce Primers-4-Yeast, a web tool that allows primers to be designed in batches for S. cerevisiae gene-targeting transformations, and for the validation of correct insertions. This novel tool enables fast, automated, accurate primer planning for large sets of genes, introduces consistency in primer planning and is therefore suggested to serve as a standard in yeast research. Primers-4-Yeast is available at: http://www.weizmann.ac.il/Primers-4-Yeast Copyright © 2013 John Wiley & Sons, Ltd.

NOTE: MMCTP: a radiotherapy research environment for Monte Carlo and patient-specific treatment planning

NASA Astrophysics Data System (ADS)

Alexander, A.; DeBlois, F.; Stroian, G.; Al-Yahya, K.; Heath, E.; Seuntjens, J.

2007-07-01

Radiotherapy research lacks a flexible computational research environment for Monte Carlo (MC) and patient-specific treatment planning. The purpose of this study was to develop a flexible software package on low-cost hardware with the aim of integrating new patient-specific treatment planning with MC dose calculations suitable for large-scale prospective and retrospective treatment planning studies. We designed the software package 'McGill Monte Carlo treatment planning' (MMCTP) for the research development of MC and patient-specific treatment planning. The MMCTP design consists of a graphical user interface (GUI), which runs on a simple workstation connected through standard secure-shell protocol to a cluster for lengthy MC calculations. Treatment planning information (e.g., images, structures, beam geometry properties and dose distributions) is converted into a convenient MMCTP local file storage format designated, the McGill RT format. MMCTP features include (a) DICOM_RT, RTOG and CADPlan CART format imports; (b) 2D and 3D visualization views for images, structure contours, and dose distributions; (c) contouring tools; (d) DVH analysis, and dose matrix comparison tools; (e) external beam editing; (f) MC transport calculation from beam source to patient geometry for photon and electron beams. The MC input files, which are prepared from the beam geometry properties and patient information (e.g., images and structure contours), are uploaded and run on a cluster using shell commands controlled from the MMCTP GUI. The visualization, dose matrix operation and DVH tools offer extensive options for plan analysis and comparison between MC plans and plans imported from commercial treatment planning systems. The MMCTP GUI provides a flexible research platform for the development of patient-specific MC treatment planning for photon and electron external beam radiation therapy. The impact of this tool lies in the fact that it allows for systematic, platform-independent, large-scale MC treatment planning for different treatment sites. Patient recalculations were performed to validate the software and ensure proper functionality.

Policy options evaluation tool for managed lanes (POET-ML) users guide and methodology description : Federal Highway Administration HOV lane performance

DOT National Transportation Integrated Search

2008-12-01

Users guide for a sketch planning tool for exploring policy alternatives. It is intended for an audience of transportation professionals responsible for planning, designing, funding, operating, enforcing, monitoring, and managing HOV and HOT lanes...

Ascent/Descent Software

NASA Technical Reports Server (NTRS)

Brown, Charles; Andrew, Robert; Roe, Scott; Frye, Ronald; Harvey, Michael; Vu, Tuan; Balachandran, Krishnaiyer; Bly, Ben

2012-01-01

The Ascent/Descent Software Suite has been used to support a variety of NASA Shuttle Program mission planning and analysis activities, such as range safety, on the Integrated Planning System (IPS) platform. The Ascent/Descent Software Suite, containing Ascent Flight Design (ASC)/Descent Flight Design (DESC) Configuration items (Cis), lifecycle documents, and data files used for shuttle ascent and entry modeling analysis and mission design, resides on IPS/Linux workstations. A list of tools in Navigation (NAV)/Prop Software Suite represents tool versions established during or after the IPS Equipment Rehost-3 project.

Adaptation Design Tool for Climate-Smart Management of Coral Reefs and Other Natural Resources.

PubMed

West, Jordan M; Courtney, Catherine A; Hamilton, Anna T; Parker, Britt A; Gibbs, David A; Bradley, Patricia; Julius, Susan H

2018-06-22

Scientists and managers of natural resources have recognized an urgent need for improved methods and tools to enable effective adaptation of management measures in the face of climate change. This paper presents an Adaptation Design Tool that uses a structured approach to break down an otherwise overwhelming and complex process into tractable steps. The tool contains worksheets that guide users through a series of design considerations for adapting their planned management actions to be more climate-smart given changing environmental stressors. Also provided with other worksheets is a framework for brainstorming new adaptation options in response to climate threats not yet addressed in the current plan. Developed and tested in collaboration with practitioners in Hawai'i and Puerto Rico using coral reefs as a pilot ecosystem, the tool and associated reference materials consist of worksheets, instructions and lessons-learned from real-world examples. On the basis of stakeholder feedback from expert consultations during tool development, we present insights and recommendations regarding how to maximize tool efficiency, gain the greatest value from the thought process, and deal with issues of scale and uncertainty. We conclude by reflecting on how the tool advances the theory and practice of assessment and decision-making science, informs higher level strategic planning, and serves as a platform for a systematic, transparent and inclusive process to tackle the practical implications of climate change for management of natural resources.

Mixed-Initiative Constraint-Based Activity Planning for Mars Exploration Rovers

NASA Technical Reports Server (NTRS)

Bresina, John; Jonsson, Ari K.; Morris, Paul H.; Rajan, Kanna

2004-01-01

In January, 2004, two NASA rovers, named Spirit and Opportunity, successfully landed on Mars, starting an unprecedented exploration of the Martian surface. Power and thermal concerns constrained the duration of this mission, leading to an aggressive plan for commanding both rovers every day. As part of the process for generating these command loads, the MAPGEN tool provides engineers and scientists an intelligent activity planning tool that allows them to more effectively generate complex plans that maximize the science return each day. The key to'the effectiveness of the MAPGEN tool is an underlying artificial intelligence plan and constraint reasoning engine. In this paper we outline the design and functionality of the MAEPGEN tool and focus on some of the key capabilities it offers to the MER mission engineers.

Contingency Contractor Optimization Phase 3 Sustainment Software Design Document - Contingency Contractor Optimization Tool - Prototype

DOE Office of Scientific and Technical Information (OSTI.GOV)

Durfee, Justin David; Frazier, Christopher Rawls; Bandlow, Alisa

This document describes the final software design of the Contingency Contractor Optimization Tool - Prototype. Its purpose is to provide the overall architecture of the software and the logic behind this architecture. Documentation for the individual classes is provided in the application Javadoc. The Contingency Contractor Optimization project is intended to address Department of Defense mandates by delivering a centralized strategic planning tool that allows senior decision makers to quickly and accurately assess the impacts, risks, and mitigation strategies associated with utilizing contract support. The Contingency Contractor Optimization Tool - Prototype was developed in Phase 3 of the OSD ATLmore » Contingency Contractor Optimization project to support strategic planning for contingency contractors. The planning tool uses a model to optimize the Total Force mix by minimizing the combined total costs for selected mission scenarios. The model optimizes the match of personnel types (military, DoD civilian, and contractors) and capabilities to meet mission requirements as effectively as possible, based on risk, cost, and other requirements.« less

12th Annual Science and Engineering Technology Conference/DoD TECH Exposition

DTIC Science & Technology

2011-06-23

compound when planning horizons grow: long design - test - build-field-adapt lead-times exacerbate uncertain futures problems, overload designs , and...ERS Environment ERS: Tools and Technologies to Facilitate Adaptability & Trustability 4. Tying design , physical and computational testing 6...science, engineering concepts, processes, and design tools to: • Continuously coordinate design , testing , and production with warfighter review to

A Set of Planning Tools for School Leaders & Teams: Differentiated Planning.

ERIC Educational Resources Information Center

Miles, Bruce H.

This presentation outline with overheads demonstrates differentiated planning, a system with four separate planning methods designed to reduce confusion and increase staff commitment to planning efforts. Differentiated planning involves: (1) prioritization (used for single question issues, multiple question issues, and as a follow-up to the…

Decision support frameworks and tools for conservation

USGS Publications Warehouse

Schwartz, Mark W.; Cook, Carly N.; Pressey, Robert L.; Pullin, Andrew S.; Runge, Michael C.; Salafsky, Nick; Sutherland, William J.; Williamson, Matthew A.

2018-01-01

The practice of conservation occurs within complex socioecological systems fraught with challenges that require transparent, defensible, and often socially engaged project planning and management. Planning and decision support frameworks are designed to help conservation practitioners increase planning rigor, project accountability, stakeholder participation, transparency in decisions, and learning. We describe and contrast five common frameworks within the context of six fundamental questions (why, who, what, where, when, how) at each of three planning stages of adaptive management (project scoping, operational planning, learning). We demonstrate that decision support frameworks provide varied and extensive tools for conservation planning and management. However, using any framework in isolation risks diminishing potential benefits since no one framework covers the full spectrum of potential conservation planning and decision challenges. We describe two case studies that have effectively deployed tools from across conservation frameworks to improve conservation actions and outcomes. Attention to the critical questions for conservation project planning should allow practitioners to operate within any framework and adapt tools to suit their specific management context. We call on conservation researchers and practitioners to regularly use decision support tools as standard practice for framing both practice and research.

SEQ-POINTER: Next generation, planetary spacecraft remote sensing science observation design tool

NASA Technical Reports Server (NTRS)

Boyer, Jeffrey S.

1994-01-01

Since Mariner, NASA-JPL planetary missions have been supported by ground software to plan and design remote sensing science observations. The software used by the science and sequence designers to plan and design observations has evolved with mission and technological advances. The original program, PEGASIS (Mariners 4, 6, and 7), was re-engineered as POGASIS (Mariner 9, Viking, and Mariner 10), and again later as POINTER (Voyager and Galileo). Each of these programs were developed under technological, political, and fiscal constraints which limited their adaptability to other missions and spacecraft designs. Implementation of a multi-mission tool, SEQ POINTER, under the auspices of the JPL Multimission Operations Systems Office (MOSO) is in progress. This version has been designed to address the limitations experienced on previous versions as they were being adapted to a new mission and spacecraft. The tool has been modularly designed with subroutine interface structures to support interchangeable celestial body and spacecraft definition models. The computational and graphics modules have also been designed to interface with data collected from previous spacecraft, or on-going observations, which describe the surface of each target body. These enhancements make SEQ POINTER a candidate for low-cost mission usage, when a remote sensing science observation design capability is required. The current and planned capabilities of the tool will be discussed. The presentation will also include a 5-10 minute video presentation demonstrating the capabilities of a proto-Cassini Project version that was adapted to test the tool. The work described in this abstract was performed by the Jet Propulsion Laboratory, California Institute of Technology, under contract to the National Aeronautics and Space Administration.

SEQ-POINTER: Next generation, planetary spacecraft remote sensing science observation design tool

NASA Astrophysics Data System (ADS)

Boyer, Jeffrey S.

1994-11-01

Since Mariner, NASA-JPL planetary missions have been supported by ground software to plan and design remote sensing science observations. The software used by the science and sequence designers to plan and design observations has evolved with mission and technological advances. The original program, PEGASIS (Mariners 4, 6, and 7), was re-engineered as POGASIS (Mariner 9, Viking, and Mariner 10), and again later as POINTER (Voyager and Galileo). Each of these programs were developed under technological, political, and fiscal constraints which limited their adaptability to other missions and spacecraft designs. Implementation of a multi-mission tool, SEQ POINTER, under the auspices of the JPL Multimission Operations Systems Office (MOSO) is in progress. This version has been designed to address the limitations experienced on previous versions as they were being adapted to a new mission and spacecraft. The tool has been modularly designed with subroutine interface structures to support interchangeable celestial body and spacecraft definition models. The computational and graphics modules have also been designed to interface with data collected from previous spacecraft, or on-going observations, which describe the surface of each target body. These enhancements make SEQ POINTER a candidate for low-cost mission usage, when a remote sensing science observation design capability is required. The current and planned capabilities of the tool will be discussed. The presentation will also include a 5-10 minute video presentation demonstrating the capabilities of a proto-Cassini Project version that was adapted to test the tool. The work described in this abstract was performed by the Jet Propulsion Laboratory, California Institute of Technology, under contract to the National Aeronautics and Space Administration.

Problem Solving in a Middle School Robotics Design Classroom

NASA Astrophysics Data System (ADS)

Norton, Stephen J.; McRobbie, Campbell J.; Ginns, Ian S.

2007-07-01

Little research has been conducted on how students work when they are required to plan, build and evaluate artefacts in technology rich learning environments such as those supported by tools including flow charts, Labview programming and Lego construction. In this study, activity theory was used as an analytic tool to examine the social construction of meaning. There was a focus on the effect of teachers’ goals and the rules they enacted upon student use of the flow chart planning tool, and the tools of the programming language Labview and Lego construction. It was found that the articulation of a teacher’s goals via rules and divisions of labour helped to form distinct communities of learning and influenced the development of different problem solving strategies. The use of the planning tool flow charting was associated with continuity of approach, integration of problem solutions including appreciation of the nexus between construction and programming, and greater educational transformation. Students who flow charted defined problems in a more holistic way and demonstrated more methodical, insightful and integrated approaches to their use of tools. The findings have implications for teaching in design dominated learning environments.

Healthy by Design: an innovative planning tool for the development of safe, accessible and attractive environments.

PubMed

Sutherland, Emma; Carlisle, Rachel

2007-01-01

The Healthy by Design guidelines were developed by the National Heart Foundation of Australia in 2004 to assist planners to deliver plans for residential developments that support active living. This article provides an overview of the contents of this resource. It also provides examples of its application and influence in the planning sector.

Account planning: applying an advertising discipline to health communication and social marketing.

PubMed

Mackert, Michael

2012-01-01

As health marketers seek new models to design campaigns, the advertising discipline of account planning offers an approach that can improve campaign development. The underlying principle of account planning is to bring the consumer perspective to all phases of campaign development, primarily through qualitative formative research. Account planners design the overall communication strategy and contribute to creative development of individual executions. The creative brief, a primary tool of account planning, is especially useful in conceptualizing campaigns. This report discusses the history and approach of account planning, followed by an example of account planning in the design of a social marketing campaign.

Highlights of the Workshop

NASA Technical Reports Server (NTRS)

Noor, Ahmed K.

1997-01-01

Economic stresses are forcing many industries to reduce cost and time-to-market, and to insert emerging technologies into their products. Engineers are asked to design faster, ever more complex systems. Hence, there is a need for novel design paradigms and effective design tools to reduce the design and development times. Several computational tools and facilities have been developed to support the design process. Some of these are described in subsequent presentations. The focus of the workshop is on the computational tools and facilities which have high potential for use in future design environment for aerospace systems. The outline for the introductory remarks is given. First, the characteristics and design drivers for future aerospace systems are outlined; second, simulation-based design environment, and some of its key modules are described; third, the vision for the next-generation design environment being planned by NASA, the UVA ACT Center and JPL is presented. The anticipated major benefits of the planned environment are listed; fourth, some of the government-supported programs related to simulation-based design are listed; and fifth, the objectives and format of the workshop are presented.

Maritime Spatial Planning supported by systematic site selection: Applying Marxan for offshore wind power in the western Baltic Sea

PubMed Central

Dahl, Karsten; Mohn, Christian

2018-01-01

The development of offshore wind energy and other competing interests in sea space are a major incentive for designating marine and coastal areas for specific human activities. Maritime Spatial Planning (MSP) considers human activities at sea in a more integrated way by analysing and designating spatial and temporal distributions of human activities based on ecological, economic and social targets. However, specific tools supporting spatial decisions at sea incorporating all relevant sectors are rarely adopted. The decision support tool Marxan is traditionally used for systematic selection and designation of nature protection and conservation areas. In this study, Marxan was applied as a support tool to identify suitable sites for offshore wind power in the pilot area Pomeranian Bight / Arkona Basin in the western Baltic Sea. The software was successfully tested and scenarios were developed that support the sites indicated in existing national plans, but also show options for alternative developments of offshore wind power in the Pomeranian Bight / Arkona Basin area. PMID:29543878

Next Generation Nuclear Plant Methods Research and Development Technical Program Plan -- PLN-2498

DOE Office of Scientific and Technical Information (OSTI.GOV)

Richard R. Schultz; Abderrafi M. Ougouag; David W. Nigg

2008-09-01

One of the great challenges of designing and licensing the Very High Temperature Reactor (VHTR) is to confirm that the intended VHTR analysis tools can be used confidently to make decisions and to assure all that the reactor systems are safe and meet the performance objectives of the Generation IV Program. The research and development (R&D) projects defined in the Next Generation Nuclear Plant (NGNP) Design Methods Development and Validation Program will ensure that the tools used to perform the required calculations and analyses can be trusted. The Methods R&D tasks are designed to ensure that the calculational envelope ofmore » the tools used to analyze the VHTR reactor systems encompasses, or is larger than, the operational and transient envelope of the VHTR itself. The Methods R&D focuses on the development of tools to assess the neutronic and thermal fluid behavior of the plant. The fuel behavior and fission product transport models are discussed in the Advanced Gas Reactor (AGR) program plan. Various stress analysis and mechanical design tools will also need to be developed and validated and will ultimately also be included in the Methods R&D Program Plan. The calculational envelope of the neutronics and thermal-fluids software tools intended to be used on the NGNP is defined by the scenarios and phenomena that these tools can calculate with confidence. The software tools can only be used confidently when the results they produce have been shown to be in reasonable agreement with first-principle results, thought-problems, and data that describe the “highly ranked” phenomena inherent in all operational conditions and important accident scenarios for the VHTR.« less

Next Generation Nuclear Plant Methods Technical Program Plan

DOE Office of Scientific and Technical Information (OSTI.GOV)

Richard R. Schultz; Abderrafi M. Ougouag; David W. Nigg

2010-12-01

One of the great challenges of designing and licensing the Very High Temperature Reactor (VHTR) is to confirm that the intended VHTR analysis tools can be used confidently to make decisions and to assure all that the reactor systems are safe and meet the performance objectives of the Generation IV Program. The research and development (R&D) projects defined in the Next Generation Nuclear Plant (NGNP) Design Methods Development and Validation Program will ensure that the tools used to perform the required calculations and analyses can be trusted. The Methods R&D tasks are designed to ensure that the calculational envelope ofmore » the tools used to analyze the VHTR reactor systems encompasses, or is larger than, the operational and transient envelope of the VHTR itself. The Methods R&D focuses on the development of tools to assess the neutronic and thermal fluid behavior of the plant. The fuel behavior and fission product transport models are discussed in the Advanced Gas Reactor (AGR) program plan. Various stress analysis and mechanical design tools will also need to be developed and validated and will ultimately also be included in the Methods R&D Program Plan. The calculational envelope of the neutronics and thermal-fluids software tools intended to be used on the NGNP is defined by the scenarios and phenomena that these tools can calculate with confidence. The software tools can only be used confidently when the results they produce have been shown to be in reasonable agreement with first-principle results, thought-problems, and data that describe the “highly ranked” phenomena inherent in all operational conditions and important accident scenarios for the VHTR.« less

Next Generation Nuclear Plant Methods Technical Program Plan -- PLN-2498

DOE Office of Scientific and Technical Information (OSTI.GOV)

Richard R. Schultz; Abderrafi M. Ougouag; David W. Nigg

2010-09-01

One of the great challenges of designing and licensing the Very High Temperature Reactor (VHTR) is to confirm that the intended VHTR analysis tools can be used confidently to make decisions and to assure all that the reactor systems are safe and meet the performance objectives of the Generation IV Program. The research and development (R&D) projects defined in the Next Generation Nuclear Plant (NGNP) Design Methods Development and Validation Program will ensure that the tools used to perform the required calculations and analyses can be trusted. The Methods R&D tasks are designed to ensure that the calculational envelope ofmore » the tools used to analyze the VHTR reactor systems encompasses, or is larger than, the operational and transient envelope of the VHTR itself. The Methods R&D focuses on the development of tools to assess the neutronic and thermal fluid behavior of the plant. The fuel behavior and fission product transport models are discussed in the Advanced Gas Reactor (AGR) program plan. Various stress analysis and mechanical design tools will also need to be developed and validated and will ultimately also be included in the Methods R&D Program Plan. The calculational envelope of the neutronics and thermal-fluids software tools intended to be used on the NGNP is defined by the scenarios and phenomena that these tools can calculate with confidence. The software tools can only be used confidently when the results they produce have been shown to be in reasonable agreement with first-principle results, thought-problems, and data that describe the “highly ranked” phenomena inherent in all operational conditions and important accident scenarios for the VHTR.« less

Towards a framework for geospatial tangible user interfaces in collaborative urban planning

NASA Astrophysics Data System (ADS)

Maquil, Valérie; Leopold, Ulrich; De Sousa, Luís Moreira; Schwartz, Lou; Tobias, Eric

2018-04-01

The increasing complexity of urban planning projects today requires new approaches to better integrate stakeholders with different professional backgrounds throughout a city. Traditional tools used in urban planning are designed for experts and offer little opportunity for participation and collaborative design. This paper introduces the concept of geospatial tangible user interfaces (GTUI) and reports on the design and implementation as well as the usability of such a GTUI to support stakeholder participation in collaborative urban planning. The proposed system uses physical objects to interact with large digital maps and geospatial data projected onto a tabletop. It is implemented using a PostGIS database, a web map server providing OGC web services, the computer vision framework reacTIVision, a Java-based TUIO client, and GeoTools. We describe how a GTUI has be instantiated and evaluated within the scope of two case studies related to real world collaborative urban planning scenarios. Our results confirm the feasibility of our proposed GTUI solutions to (a) instantiate different urban planning scenarios, (b) support collaboration, and (c) ensure an acceptable usability.

Towards a framework for geospatial tangible user interfaces in collaborative urban planning

NASA Astrophysics Data System (ADS)

Maquil, Valérie; Leopold, Ulrich; De Sousa, Luís Moreira; Schwartz, Lou; Tobias, Eric

2018-03-01

The increasing complexity of urban planning projects today requires new approaches to better integrate stakeholders with different professional backgrounds throughout a city. Traditional tools used in urban planning are designed for experts and offer little opportunity for participation and collaborative design. This paper introduces the concept of geospatial tangible user interfaces (GTUI) and reports on the design and implementation as well as the usability of such a GTUI to support stakeholder participation in collaborative urban planning. The proposed system uses physical objects to interact with large digital maps and geospatial data projected onto a tabletop. It is implemented using a PostGIS database, a web map server providing OGC web services, the computer vision framework reacTIVision, a Java-based TUIO client, and GeoTools. We describe how a GTUI has be instantiated and evaluated within the scope of two case studies related to real world collaborative urban planning scenarios. Our results confirm the feasibility of our proposed GTUI solutions to (a) instantiate different urban planning scenarios, (b) support collaboration, and (c) ensure an acceptable usability.

Managing design excellence tools during the development of new orthopaedic implants.

PubMed

Défossez, Henri J P; Serhan, Hassan

2013-11-01

Design excellence (DEX) tools have been widely used for years in some industries for their potential to facilitate new product development. The medical sector, targeted by cost pressures, has therefore started adopting them. Numerous tools are available; however only appropriate deployment during the new product development stages can optimize the overall process. The primary study objectives were to describe generic tools and illustrate their implementation and management during the development of new orthopaedic implants, and compile a reference package. Secondary objectives were to present the DEX tool investment costs and savings, since the method can require significant resources for which companies must carefully plan. The publicly available DEX method "Define Measure Analyze Design Verify Validate" was adopted and implemented during the development of a new spinal implant. Several tools proved most successful at developing the correct product, addressing clinical needs, and increasing market penetration potential, while reducing design iterations and manufacturing validations. Cost analysis and Pugh Matrix coupled with multi generation planning enabled developing a strong rationale to activate the project, set the vision and goals. improved risk management and product map established a robust technical verification-validation program. Design of experiments and process quantification facilitated design for manufacturing of critical features, as early as the concept phase. Biomechanical testing with analysis of variance provided a validation model with a recognized statistical performance baseline. Within those tools, only certain ones required minimum resources (i.e., business case, multi generational plan, project value proposition, Pugh Matrix, critical To quality process validation techniques), while others required significant investments (i.e., voice of customer, product usage map, improved risk management, design of experiments, biomechanical testing techniques). All used techniques provided savings exceeding investment costs. Some other tools were considered and found less relevant. A matrix summarized the investment costs and generated estimated savings. Globally, all companies can benefit from using DEX by smartly selecting and estimating those tools with best return on investment at the start of the project. For this, a good understanding of the available company resources, background and development strategy are needed. In conclusion, it was possible to illustrate that appropriate management of design excellence tools can greatly facilitate the development of new orthopaedic implant systems.

Seismology software: state of the practice

NASA Astrophysics Data System (ADS)

Smith, W. Spencer; Zeng, Zheng; Carette, Jacques

2018-05-01

We analyzed the state of practice for software development in the seismology domain by comparing 30 software packages on four aspects: product, implementation, design, and process. We found room for improvement in most seismology software packages. The principal areas of concern include a lack of adequate requirements and design specification documents, a lack of test data to assess reliability, a lack of examples to get new users started, and a lack of technological tools to assist with managing the development process. To assist going forward, we provide recommendations for a document-driven development process that includes a problem statement, development plan, requirement specification, verification and validation (V&V) plan, design specification, code, V&V report, and a user manual. We also provide advice on tool use, including issue tracking, version control, code documentation, and testing tools.

Seismology software: state of the practice

NASA Astrophysics Data System (ADS)

Smith, W. Spencer; Zeng, Zheng; Carette, Jacques

2018-02-01

We analyzed the state of practice for software development in the seismology domain by comparing 30 software packages on four aspects: product, implementation, design, and process. We found room for improvement in most seismology software packages. The principal areas of concern include a lack of adequate requirements and design specification documents, a lack of test data to assess reliability, a lack of examples to get new users started, and a lack of technological tools to assist with managing the development process. To assist going forward, we provide recommendations for a document-driven development process that includes a problem statement, development plan, requirement specification, verification and validation (V&V) plan, design specification, code, V&V report, and a user manual. We also provide advice on tool use, including issue tracking, version control, code documentation, and testing tools.

3D Displays And User Interface Design For A Radiation Therapy Treatment Planning CAD Tool

NASA Astrophysics Data System (ADS)

Mosher, Charles E.; Sherouse, George W.; Chaney, Edward L.; Rosenman, Julian G.

1988-06-01

The long term goal of the project described in this paper is to improve local tumor control through the use of computer-aided treatment design methods that can result in selection of better treatment plans compared with conventional planning methods. To this end, a CAD tool for the design of radiation treatment beams is described. Crucial to the effectiveness of this tool are high quality 3D display techniques. We have found that 2D and 3D display methods dramatically improve the comprehension of the complex spatial relationships between patient anatomy, radiation beams, and dose distributions. In order to take full advantage of these displays, an intuitive and highly interactive user interface was created. If the system is to be used by physicians unfamiliar with computer systems, it is essential that a user interface is incorporated that allows the user to navigate through each step of the design process in a manner similar to what they are used to. Compared with conventional systems, we believe our display and CAD tools will allow the radiotherapist to achieve more accurate beam targetting leading to a better radiation dose configuration to the tumor volume. This would result in a reduction of the dose to normal tissue.

Design and Operational Evaluation of the Traffic Management Advisor at the Fort Worth Air Route Traffic Control Center

DOT National Transportation Integrated Search

1997-06-19

NASA and the Federal Aviation Administration (FAA) have designed and developed an automation tool known as the Traffic Management Advisor (TMA). The TMA is a time-based strategic planning tool that provides Traffic Management Coordinators (TMCs) and ...

Development of a Design Tool for Planning Aqueous Amendment Injection Systems

DTIC Science & Technology

2012-08-01

Chemical Oxidation with Permanganate (MnO4- ) ...................................... 2 1.4 IMPLEMENTATION ISSUES...17 6.4 SS DESIGN TOOL DEVELOPMENT AND EVALUATION ........................... 19 7.0 CHEMICAL OXIDATION WITH PERMANGANATE ...21 7.1 NUMERICAL MODELING OF PERMANGANATE DISTRIBUTION ........... 21 7.2 CDISCO DEVELOPMENT AND EVALUATION

Deep Impact Sequence Planning Using Multi-Mission Adaptable Planning Tools With Integrated Spacecraft Models

NASA Technical Reports Server (NTRS)

Wissler, Steven S.; Maldague, Pierre; Rocca, Jennifer; Seybold, Calina

2006-01-01

The Deep Impact mission was ambitious and challenging. JPL's well proven, easily adaptable multi-mission sequence planning tools combined with integrated spacecraft subsystem models enabled a small operations team to develop, validate, and execute extremely complex sequence-based activities within very short development times. This paper focuses on the core planning tool used in the mission, APGEN. It shows how the multi-mission design and adaptability of APGEN made it possible to model spacecraft subsystems as well as ground assets throughout the lifecycle of the Deep Impact project, starting with models of initial, high-level mission objectives, and culminating in detailed predictions of spacecraft behavior during mission-critical activities.

The use of the digital smile design concept as an auxiliary tool in periodontal plastic surgery.

PubMed

Santos, Felipe Rychuv; Kamarowski, Stephanie Felice; Lopez, Camilo Andres Villabona; Storrer, Carmen Lucia Mueller; Neto, Alexandre Teixeira; Deliberador, Tatiana Miranda

2017-01-01

Periodontal surgery associated with prior waxing, mock-up, and the use of digital tools to design the smile is the current trend of reverse planning in periodontal plastic surgery. The objective of this study is to report a surgical resolution of the gummy smile using a prior esthetic design with the use of digital tools. A digital smile design and mock-up were used for performing gingival recontouring surgery. The relationship between the facial and dental measures and the incisal plane with the horizontal facial plane of reference were evaluated. The relative dental height x width was measured, and the dental contour drawing was inserted. Complementary lines are drawn such as the gingival zenith, joining lines of the gingival and incisal battlements. The periodontal esthetic was improved according to the established design digital smile pattern. These results demonstrate the importance of surgical techniques and are well accepted by patients and are easy to perform for the professional. When properly planned, they provide the desired expectations. Periodontal Surgical procedures associated with the design digital smile facilitate the communication between the patient and the professional. It is, therefore, essential to demonstrate the reverse planning of the smile and periodontal parameters with approval by the patient to solve the esthetic problem.

Policy Negotiations: Simulation as a Tool in Long-Range Library Planning

ERIC Educational Resources Information Center

Townley, Charles T.; And Others

1978-01-01

The development and use of a simulation game designed to facilitate nationwide long-range library planning for American Indian communities is described. The use of simulation outcomes in plan development is analyzed. Implications on the effectiveness of simulation in the library planning process are made. (Author)

Team-Building Tools for Students.

ERIC Educational Resources Information Center

Page, Diana; Donelan, Joseph G.

2003-01-01

Explains why college students need teamwork skills. Discusses how instructors can help develop those skills and design projects to improve them. Provides an action plan and team-building tools. (Author/SK)

The Way Point Planning Tool: Real Time Flight Planning for Airborne Science

NASA Technical Reports Server (NTRS)

He, Yubin; Blakeslee, Richard; Goodman, Michael; Hall, John

2012-01-01

Airborne real time observation are a major component of NASA's Earth Science research and satellite ground validation studies. For mission scientist, planning a research aircraft mission within the context of meeting the science objective is a complex task because it requires real time situational awareness of the weather conditions that affect the aircraft track. Multiple aircraft are often involved in the NASA field campaigns the coordination of the aircraft with satellite overpasses, other airplanes and the constantly evolving dynamic weather conditions often determine the success of the campaign. A flight planning tool is needed to provide situational awareness information to the mission scientist and help them plan and modify the flight tracks successfully. Scientists at the University of Alabama Huntsville and the NASA Marshal Space Flight Center developed the Waypoint Planning Tool (WPT), an interactive software tool that enables scientist to develop their own flight plans (also known as waypoints), with point and click mouse capabilities on a digital map filled with time raster and vector data. The development of this Waypoint Planning Tool demonstrates the significance of mission support in responding to the challenges presented during NASA field campaigns. Analyses during and after each campaign helped identify both issues and new requirements, initiating the next wave of development. Currently the Waypoint Planning Tool has gone through three rounds of development and analysis processes. The development of this waypoint tool is directly affected by the technology advances on GIS/Mapping technologies. From the standalone Google Earth application and simple KML functionalities to the Google Earth Plugin and Java Web Start/Applet on web platform, as well as to the rising open source GIS tools with new JavaScript frameworks, the Waypoint planning Tool has entered its third phase of technology advancement. The newly innovated, cross-platform, modular designed JavaScript-controled Waypoint tool is planned to be integrated with the NASA Airborne Science Mission Tool Suite. Adapting new technologies for the Waypoint Planning Tool ensures its success in helping scientist reach their mission objectives. This presentation will discuss the development process of the Waypoint Planning Tool in responding to field campaign challenges, identifying new information technologies, and describing the capabilities and features of the Waypoint Planning Tool with the real time aspect, interactive nature, and the resultant benefits to the airborne science community.

BH-ShaDe: A Software Tool That Assists Architecture Students in the III-Structured Task of Housing Design

ERIC Educational Resources Information Center

Millan, Eva; Belmonte, Maria-Victoria; Ruiz-Montiel, Manuela; Gavilanes, Juan; Perez-de-la-Cruz, Jose-Luis

2016-01-01

In this paper, we present BH-ShaDe, a new software tool to assist architecture students learning the ill-structured domain/task of housing design. The software tool provides students with automatic or interactively generated floor plan schemas for basic houses. The students can then use the generated schemas as initial seeds to develop complete…

A Guide for Planning Facilities for Occupational Preparation Programs in the Machine Trades. Interim Report. Research 24.

ERIC Educational Resources Information Center

Larson, Milton E.

This guide is designed for use by any person or groups of persons responsible for planning occupational programs in the machine trades. Its major purpose is to elicit the necessary information for the writing of educational specifications for facilities to house needed vocational programs in machine tool operation, machine shop, and tool and die…

Development of Waypoint Planning Tool in Response to NASA Field Campaign Challenges

NASA Technical Reports Server (NTRS)

He, Matt; Hardin, Danny; Conover, Helen; Graves, Sara; Meyer, Paul; Blakeslee, Richard; Goodman, Michael

2012-01-01

Airborne real time observations are a major component of NASA's Earth Science research and satellite ground validation studies. For mission scientists, planning a research aircraft mission within the context of meeting the science objectives is a complex task because it requires real time situational awareness of the weather conditions that affect the aircraft track. Multiple aircrafts are often involved in NASA field campaigns. The coordination of the aircrafts with satellite overpasses, other airplanes and the constantly evolving, dynamic weather conditions often determines the success of the campaign. A flight planning tool is needed to provide situational awareness information to the mission scientists, and help them plan and modify the flight tracks. Scientists at the University of Alabama-Huntsville and the NASA Marshall Space Flight Center developed the Waypoint Planning Tool, an interactive software tool that enables scientists to develop their own flight plans (also known as waypoints) with point -and-click mouse capabilities on a digital map filled with real time raster and vector data. The development of this Waypoint Planning Tool demonstrates the significance of mission support in responding to the challenges presented during NASA field campaigns. Analysis during and after each campaign helped identify both issues and new requirements, and initiated the next wave of development. Currently the Waypoint Planning Tool has gone through three rounds of development and analysis processes. The development of this waypoint tool is directly affected by the technology advances on GIS/Mapping technologies. From the standalone Google Earth application and simple KML functionalities, to Google Earth Plugin and Java Web Start/Applet on web platform, and to the rising open source GIS tools with new JavaScript frameworks, the Waypoint Planning Tool has entered its third phase of technology advancement. The newly innovated, cross ]platform, modular designed JavaScript ]controlled Way Point Tool is planned to be integrated with NASA Airborne Science Mission Tool Suite. Adapting new technologies for the Waypoint Planning Tool ensures its success in helping scientists reach their mission objectives. This presentation will discuss the development processes of the Waypoint Planning Tool in responding to field campaign challenges, identify new information technologies, and describe the capabilities and features of the Waypoint Planning Tool with the real time aspect, interactive nature, and the resultant benefits to the airborne science community.

Development of Way Point Planning Tool in Response to NASA Field Campaign Challenges

NASA Astrophysics Data System (ADS)

He, M.; Hardin, D. M.; Conover, H.; Graves, S. J.; Meyer, P.; Blakeslee, R. J.; Goodman, M. L.

2012-12-01

Airborne real time observations are a major component of NASA's Earth Science research and satellite ground validation studies. For mission scientists, planning a research aircraft mission within the context of meeting the science objectives is a complex task because it requires real time situational awareness of the weather conditions that affect the aircraft track. Multiple aircrafts are often involved in NASA field campaigns. The coordination of the aircrafts with satellite overpasses, other airplanes and the constantly evolving, dynamic weather conditions often determines the success of the campaign. A flight planning tool is needed to provide situational awareness information to the mission scientists, and help them plan and modify the flight tracks. Scientists at the University of Alabama-Huntsville and the NASA Marshall Space Flight Center developed the Waypoint Planning Tool, an interactive software tool that enables scientists to develop their own flight plans (also known as waypoints) with point-and-click mouse capabilities on a digital map filled with real time raster and vector data. The development of this Waypoint Planning Tool demonstrates the significance of mission support in responding to the challenges presented during NASA field campaigns. Analysis during and after each campaign helped identify both issues and new requirements, and initiated the next wave of development. Currently the Waypoint Planning Tool has gone through three rounds of development and analysis processes. The development of this waypoint tool is directly affected by the technology advances on GIS/Mapping technologies. From the standalone Google Earth application and simple KML functionalities, to Google Earth Plugin and Java Web Start/Applet on web platform, and to the rising open source GIS tools with new JavaScript frameworks, the Waypoint Planning Tool has entered its third phase of technology advancement. The newly innovated, cross-platform, modular designed JavaScript-controlled Way Point Tool is planned to be integrated with NASA Airborne Science Mission Tool Suite. Adapting new technologies for the Waypoint Planning Tool ensures its success in helping scientists reach their mission objectives. This presentation will discuss the development processes of the Waypoint Planning Tool in responding to field campaign challenges, identify new information technologies, and describe the capabilities and features of the Waypoint Planning Tool with the real time aspect, interactive nature, and the resultant benefits to the airborne science community.

Strategy Planning Visualization Tool (SPVT) for the Air Operations Center (AOC). Volume 2: Information Operations (IO) Planning Enhancements

DTIC Science & Technology

2009-12-31

Status and Assessment data interfaces leverage the TBONE Services and data model. The services and supporting Java 2 Platform Enterprise Edition (J2EE...existing Java ™ and .Net developed “Fat Clients.” The IOPC-X design includes an Open Services Gateway Initiative (OSGi) compliant plug-in...J2EE Java 2 Platform Enterprise Edition JAOP Joint Air Operations Plan JAST JAOP AOD Status Tool JFACC Joint Forces Air Component Commander Data

NTL Data Management Planning "Greenout" Bingo Self Assessment Tool

DOT National Transportation Integrated Search

2016-08-11

This tool is designed to help assess your current data management practices. Pick a dataset or research project, sit down with your data collection team, and discuss each prompt below. This tool can guide DMP improvement by revealing best practices t...

Sustaining Learning Design and Pedagogical Planning in CSCL

ERIC Educational Resources Information Center

Pozzi, Francesca; Francesca, Donatella

2013-01-01

This paper tackles the issue of learning design and pedagogical planning in the context of computer-supported collaborative learning (CSCL). In this sector, we witness the same variety of approaches and tools that we find in the technology-enhanced learning (TEL) research field. In particular, in the CSCL context, notions such as…

The Hemophilia Games: An Experiment in Health Education Planning.

ERIC Educational Resources Information Center

National Heart and Lung Inst. (DHEW/PHS), Bethesda, MD.

The Hemophilia Health Education Planning Project was designed to (1) create a set of tools useful in hemophilia planning and education, and (2) create a planning model for other diseases with similar factors. The project used the game-simulations technique which was felt to be particularly applicable to hemophilia health problems, since as a…

Your Marketing Plan: A Workbook for Small Businesses in Oregon.

ERIC Educational Resources Information Center

Pryor, Chris

Designed as an aid for those interested in starting a business and for experienced business owners who have never prepared a written marketing plan, this workbook offers fundamental concepts about marketing planning, provides tools to effectively assess a marketing situation, and presents step-by-step assistance in developing a marketing plan.…

Design tool for inventory and monitoring

Treesearch

Charles T. Scott; Renate Bush

2009-01-01

Forest survey planning typically begins by determining the area to be sampled and the attributes to be measured. All too often the data are collected but underutilized because they did not address the critical management questions. The Design Tool for Inventory and Monitoring (DTIM) is being developed by the National Inventory and Monitoring Applications Center in...

The Integrated Medical Model: A Risk Assessment and Decision Support Tool for Space Flight Medical Systems

NASA Technical Reports Server (NTRS)

Kerstman, Eric; Minard, Charles; Saile, Lynn; deCarvalho, Mary Freire; Myers, Jerry; Walton, Marlei; Butler, Douglas; Iyengar, Sriram; Johnson-Throop, Kathy; Baumann, David

2009-01-01

The Integrated Medical Model (IMM) is a decision support tool that is useful to mission planners and medical system designers in assessing risks and designing medical systems for space flight missions. The IMM provides an evidence based approach for optimizing medical resources and minimizing risks within space flight operational constraints. The mathematical relationships among mission and crew profiles, medical condition incidence data, in-flight medical resources, potential crew functional impairments, and clinical end-states are established to determine probable mission outcomes. Stochastic computational methods are used to forecast probability distributions of crew health and medical resource utilization, as well as estimates of medical evacuation and loss of crew life. The IMM has been used in support of the International Space Station (ISS) medical kit redesign, the medical component of the ISS Probabilistic Risk Assessment, and the development of the Constellation Medical Conditions List. The IMM also will be used to refine medical requirements for the Constellation program. The IMM outputs for ISS and Constellation design reference missions will be presented to demonstrate the potential of the IMM in assessing risks, planning missions, and designing medical systems. The implementation of the IMM verification and validation plan will be reviewed. Additional planned capabilities of the IMM, including optimization techniques and the inclusion of a mission timeline, will be discussed. Given the space flight constraints of mass, volume, and crew medical training, the IMM is a valuable risk assessment and decision support tool for medical system design and mission planning.

Electronic Design Automation (EDA) Roadmap Taskforce Report, Design of Microprocessors

DTIC Science & Technology

1999-04-01

through on time. Hence, the study is not a crystal-ball- gazing exercise, but a rigorous, schedulable plan of action to attain the goal. NTRS97...formats so as not to impose too heavy a maintenance burden on their users Object Interfaces eliminate these problems: • A tool that binds the interface ...and User Interface - Design Tool Communication - EDA System Extension Language - EDA Standards- Based Software Development Environment - Design and

Development of Continuing Nursing Education Offerings for the World Wide Web.

ERIC Educational Resources Information Center

Billings, Diane M.; Rowles, Connie J.

2001-01-01

Describes steps for web-based continuing education courses in terms of planning (strategic plan, website development, resource team, marketing plan), implementing (course design, web-based tools, copyright and intellectual property), and evaluating (pilot test, formative/summative evaluation, continuous quality improvement). (Contains 16…

Revel8or: Model Driven Capacity Planning Tool Suite

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhu, Liming; Liu, Yan; Bui, Ngoc B.

2007-05-31

Designing complex multi-tier applications that must meet strict performance requirements is a challenging software engineering problem. Ideally, the application architect could derive accurate performance predictions early in the project life-cycle, leveraging initial application design-level models and a description of the target software and hardware platforms. To this end, we have developed a capacity planning tool suite for component-based applications, called Revel8tor. The tool adheres to the model driven development paradigm and supports benchmarking and performance prediction for J2EE, .Net and Web services platforms. The suite is composed of three different tools: MDAPerf, MDABench and DSLBench. MDAPerf allows annotation of designmore » diagrams and derives performance analysis models. MDABench allows a customized benchmark application to be modeled in the UML 2.0 Testing Profile and automatically generates a deployable application, with measurement automatically conducted. DSLBench allows the same benchmark modeling and generation to be conducted using a simple performance engineering Domain Specific Language (DSL) in Microsoft Visual Studio. DSLBench integrates with Visual Studio and reuses its load testing infrastructure. Together, the tool suite can assist capacity planning across platforms in an automated fashion.« less

Multi Modal Anticipation in Fuzzy Space

NASA Astrophysics Data System (ADS)

Asproth, Viveca; Holmberg, Stig C.; Hâkansson, Anita

2006-06-01

We are all stakeholders in the geographical space, which makes up our common living and activity space. This means that a careful, creative, and anticipatory planning, design, and management of that space will be of paramount importance for our sustained life on earth. Here it is shown that the quality of such planning could be significantly increased with help of a computer based modelling and simulation tool. Further, the design and implementation of such a tool ought to be guided by the conceptual integration of some core concepts like anticipation and retardation, multi modal system modelling, fuzzy space modelling, and multi actor interaction.

Massachusetts Public Fire and Safety Education Curriculum Planning Guidebook. Second Version.

ERIC Educational Resources Information Center

Massachusetts Department of Fire Services, Stow.

This updated curriculum planning guidebook is a resource for fire educators throughout the state of Massachusetts. It is designed to be a tool in efforts to: identify fire problems in the community; select appropriate behaviors and lessons to correct the fire problems; design fire education programs; and implement and evaluate the programs. The…

Unconventional Tools for an Unconventional Resource: Community and Landscape Planning for Shale in the Marcellus Region

NASA Astrophysics Data System (ADS)

Murtha, T., Jr.; Orland, B.; Goldberg, L.; Hammond, R.

2014-12-01

Deep shale natural gas deposits made accessible by new technologies are quickly becoming a considerable share of North America's energy portfolio. Unlike traditional deposits and extraction footprints, shale gas offers dispersed and complex landscape and community challenges. These challenges are both cultural and environmental. This paper describes the development and application of creative geospatial tools as a means to engage communities along the northern tier counties of Pennsylvania, experiencing Marcellus shale drilling in design and planning. Uniquely combining physical landscape models with predictive models of exploration activities, including drilling, pipeline construction and road reconstruction, the tools quantify the potential impacts of drilling activities for communities and landscapes in the commonwealth of Pennsylvania. Dividing the state into 9836 watershed sub-basins, we first describe the current state of Marcellus related activities through 2014. We then describe and report the results of three scaled predictive models designed to investigate probable sub-basins where future activities will be focused. Finally, the core of the paper reports on the second level of tools we have now developed to engage communities in planning for unconventional gas extraction in Pennsylvania. Using a geodesign approach we are working with communities to transfer information for comprehensive landscape planning and informed decision making. These tools not only quantify physical landscape impacts, but also quantify potential visual, aesthetic and cultural resource implications.

The new medicare drug benefit: formularies and their potential effects on access to medications.

PubMed

Huskamp, Haiden A; Keating, Nancy L

2005-07-01

During congressional debate over the Medicare Part D prescription drug benefit, much attention was focused on nominal benefit design. Relatively little attention was paid to details about how plans would operate, such as the design of drug formularies. Yet, formularies will be important tools for controlling costs, and may be as important as nominal benefit design in determining enrollees' access to medications and out-of-pocket costs. We describe Part D plan incentives and how they may influence formulary design, and then provide recommendations for Part D formulary implementation. We encourage the Centers for Medicare & Medicaid Services (CMS) to develop standardized tools to provide physicians and patients with up-to-date and easily accessible information about covered drugs on each plan's formulary (perhaps via a central website) and a national set of easy-to-follow procedures for reconsideration and appeals. Such efforts should reduce administrative burden and better allow physicians to help patients obtain needed medications.

Empowering the Design and the Sharing of Learning Plans by Means of Net Technologies: The IAMEL System

NASA Astrophysics Data System (ADS)

Bottino, Rosa Maria; Ott, Michela; Tavella, Mauro

This paper reports on the research work carried out by the authors in the framework of the IAMEL project, supported by the Italian Ministry of Education. The project was mainly aimed at enhancing the teaching/learning of mathematics by providing teachers with specific e-learning platforms endowed with a number of dedicated tools supporting the setting-up and the carrying-out of specific in-field experiments. One of the main results of the project was the development of a methodology to carry out the design of educational interventions; such a methodology was based on a conceptual goal-oriented framework and on different authoring tools among which the IAMEL system, an online tool fully described in the paper that allows both the production and the sharing of pedagogical plans and consents the design and the modeling of educational interventions with different levels of granularity and scope.

Career Activity File: Counseling Tools for a Guidance Program, K-12.

ERIC Educational Resources Information Center

Oklahoma State Dept. of Career and Technology Education, Stillwater.

This career activity file provides career information resources and tools to support a guidance program. Section 1 is a school guidance program plan designed to assist school counselors in strengthening their current program or in designing a new one. The information can be used to assist schools in meeting the requirements of Standard VI,…

"Thinking about Drinking": Exploring Children's Perceptions of Alcohol Using the Draw and Write Tool

ERIC Educational Resources Information Center

Farmer, Siobhan; Porcellato, Lorna

2016-01-01

Purpose: The purpose of this paper is to explore perceptions of alcohol held by schoolchildren using the "Draw and Write" tool, to inform the planning of alcohol education in the classroom setting. Design/methodology/approach: A specifically designed "Draw and Write" booklet was used with 169 children aged nine to ten years…

Patient-specific surgical planning and hemodynamic computational fluid dynamics optimization through free-form haptic anatomy editing tool (SURGEM).

PubMed

Pekkan, Kerem; Whited, Brian; Kanter, Kirk; Sharma, Shiva; de Zelicourt, Diane; Sundareswaran, Kartik; Frakes, David; Rossignac, Jarek; Yoganathan, Ajit P

2008-11-01

The first version of an anatomy editing/surgical planning tool (SURGEM) targeting anatomical complexity and patient-specific computational fluid dynamics (CFD) analysis is presented. Novel three-dimensional (3D) shape editing concepts and human-shape interaction technologies have been integrated to facilitate interactive surgical morphology alterations, grid generation and CFD analysis. In order to implement "manual hemodynamic optimization" at the surgery planning phase for patients with congenital heart defects, these tools are applied to design and evaluate possible modifications of patient-specific anatomies. In this context, anatomies involve complex geometric topologies and tortuous 3D blood flow pathways with multiple inlets and outlets. These tools make it possible to freely deform the lumen surface and to bend and position baffles through real-time, direct manipulation of the 3D models with both hands, thus eliminating the tedious and time-consuming phase of entering the desired geometry using traditional computer-aided design (CAD) systems. The 3D models of the modified anatomies are seamlessly exported and meshed for patient-specific CFD analysis. Free-formed anatomical modifications are quantified using an in-house skeletization based cross-sectional geometry analysis tool. Hemodynamic performance of the systematically modified anatomies is compared with the original anatomy using CFD. CFD results showed the relative importance of the various surgically created features such as pouch size, vena cave to pulmonary artery (PA) flare and PA stenosis. An interactive surgical-patch size estimator is also introduced. The combined design/analysis cycle time is used for comparing and optimizing surgical plans and improvements are tabulated. The reduced cost of patient-specific shape design and analysis process, made it possible to envision large clinical studies to assess the validity of predictive patient-specific CFD simulations. In this paper, model anatomical design studies are performed on a total of eight different complex patient specific anatomies. Using SURGEM, more than 30 new anatomical designs (or candidate configurations) are created, and the corresponding user times presented. CFD performances for eight of these candidate configurations are also presented.

Specification and Design Methodologies for High-Speed Fault-Tolerant Array Algorithms and Structures for VLSI.

DTIC Science & Technology

1987-06-01

evaluation and chip layout planning for VLSI digital systems. A high-level applicative (functional) language, implemented at UCLA, allows combining of...operating system. 2.1 Introduction The complexity of VLSI requires the application of CAD tools at all levels of the design process. In order to be...effective, these tools must be adaptive to the specific design. In this project we studied a design method based on the use of applicative languages

Development of a Comprehensive and Interactive Tool to Inform State Violence and Injury Prevention Plans

PubMed Central

Wilson, Lauren; Deokar, Angela J.; Zaesim, Araya; Thomas, Karen; Kresnow-Sedacca, Marcie-jo

2018-01-01

Context The Center of Disease Control and Prevention’s Core State Violence and Injury Prevention Program (Core SVIPP) provides an opportunity for states to engage with their partners to implement, evaluate, and disseminate strategies that lead to the reduction and prevention of injury and violence. Core SVIPP requires awardees to develop or update their state injury and violence plans. Currently, literature informing state planning efforts is limited, especially regarding materials related to injury and violence. Presumably, plans that are higher quality result in having a greater impact on preventing injury and violence, and literature to improve quality would benefit prevention programming. Objective (1) To create a comprehensive injury-specific index to aid in the development and revision of state injury and violence prevention plans, and (2) to assess the reliability and utility of this index. Design Through an iterative development process, a workgroup of subject matter experts created the Violence and Injury Prevention: Comprehensive Index Tool (VIP:CIT). The tool was pilot tested on 3 state injury and violence prevention plans and assessed for initial usability. Following revisions to the tool (ie, a rubric was developed to further delineate consistent criteria for rating; items were added and clarified), the same state plans were reassessed to test interrater reliability and tool utility. Results For the second assessment, reliability of the VIP:CIT improved, indicating that the rubric was a useful addition. Qualitative feedback from states suggested that the tool significantly helped guide plan development and communicate about planning processes. Conclusion The final VIP:CIT is a tool that can help increase plan quality, decrease the research-to-practice gap, and increase connectivity to emerging public health paradigms. The tool provides an example of tailoring guidance materials to reflect academic literature, and it can be easily adapted to other topic areas to promote quality of strategic plans for numerous outcomes. PMID:29189505

ArrayNinja: An Open Source Platform for Unified Planning and Analysis of Microarray Experiments.

PubMed

Dickson, B M; Cornett, E M; Ramjan, Z; Rothbart, S B

2016-01-01

Microarray-based proteomic platforms have emerged as valuable tools for studying various aspects of protein function, particularly in the field of chromatin biochemistry. Microarray technology itself is largely unrestricted in regard to printable material and platform design, and efficient multidimensional optimization of assay parameters requires fluidity in the design and analysis of custom print layouts. This motivates the need for streamlined software infrastructure that facilitates the combined planning and analysis of custom microarray experiments. To this end, we have developed ArrayNinja as a portable, open source, and interactive application that unifies the planning and visualization of microarray experiments and provides maximum flexibility to end users. Array experiments can be planned, stored to a private database, and merged with the imaged results for a level of data interaction and centralization that is not currently attainable with available microarray informatics tools. © 2016 Elsevier Inc. All rights reserved.

Diagnostic Tools for the Systemic Reform of Schools.

ERIC Educational Resources Information Center

Amsler, Mary; Kirsch, Kayla

This paper presents three interrelated diagnostic tools that can be used by school staff as they begin to plan a systemic reform effort. These tools are designed to help educators reflect on their experiences in creating changes in their school and to examine the current barriers to and supports for the change process. The tools help school design…

Realization of planning design of mechanical manufacturing system by Petri net simulation model

NASA Astrophysics Data System (ADS)

Wu, Yanfang; Wan, Xin; Shi, Weixiang

1991-09-01

Planning design is to work out a more overall long-term plan. In order to guarantee a mechanical manufacturing system (MMS) designed to obtain maximum economical benefit, it is necessary to carry out a reasonable planning design for the system. First, some principles on planning design for MMS are introduced. Problems of production scheduling and their decision rules for computer simulation are presented. Realizable method of each production scheduling decision rule in Petri net model is discussed. Second, the solution of conflict rules for conflict problems during running Petri net is given. Third, based on the Petri net model of MMS which includes part flow and tool flow, according to the principle of minimum event time advance, a computer dynamic simulation of the Petri net model, that is, a computer dynamic simulation of MMS, is realized. Finally, the simulation program is applied to a simulation exmple, so the scheme of a planning design for MMS can be evaluated effectively.

Assessment of the Monitor Unit Objective tool for VMAT in the Eclipse treatment planning system.

PubMed

Jiménez-Puertas, Sara; Sánchez-Artuñedo, David; Hermida-López, Marcelino

2018-01-01

This work aims to achieve the highest possible monitor units (MU) reduction using the MU Objective tool included in the Eclipse treatment planning system, while preserving the plan quality. The treatment planning system Eclipse (Varian Medical Systems, Palo Alto, CA) includes a control mechanism for the number of monitor units of volumetric modulated arc therapy (VMAT) plans, named the MU Objective tool. Forty prostate plans, 20 gynecological plans and 20 head and neck plans designed with VMAT were retrospectively studied. Each plan ( base plan ) was optimized without using the MU Objective tool, and it was re-optimized with different values of the Maximum MU ( MaxMU ) parameter of the MU Objective tool. MU differences were analyzed with a paired samples t -test and changes in plan quality were assessed with a set of parameters for OARs and PTVs. The average relative MU difference [Formula: see text] considering all treatment sites, was the highest when MaxMU  = 400 (-4.2%, p  < 0.001). For prostate plans, the lowest [Formula: see text] was obtained (-3.7%, p  < 0.001). For head and neck plans [Formula: see text] was -7.3% ( p  < 0.001) and for gynecological plans [Formula: see text] was 7.0% ( p  = 0.002). Although similar MU reductions were observed for both sites, for some gynecological plans maximum differences were greater than 10%. All the assessed parameters for PTVs and OARs sparing showed average differences below 2%. For the three studied clinical sites, establishing MaxMU  = 400 led to the optimum MU reduction, maintaining the original dose distribution and dosimetric parameters practically unaltered.

Orbit Software Suite

NASA Technical Reports Server (NTRS)

Osgood, Cathy; Williams, Kevin; Gentry, Philip; Brownfield, Dana; Hallstrom, John; Stuit, Tim

2012-01-01

Orbit Software Suite is used to support a variety of NASA/DM (Dependable Multiprocessor) mission planning and analysis activities on the IPS (Intrusion Prevention System) platform. The suite of Orbit software tools (Orbit Design and Orbit Dynamics) resides on IPS/Linux workstations, and is used to perform mission design and analysis tasks corresponding to trajectory/ launch window, rendezvous, and proximity operations flight segments. A list of tools in Orbit Software Suite represents tool versions established during/after the Equipment Rehost-3 Project.

Beyond consumer-driven health care: purchasers' expectations of all plans.

PubMed

Lee, Peter V; Hoo, Emma

2006-01-01

Skyrocketing health care costs and quality deficits can only be addressed through a broad approach of quality-based benefit design. Consumer-directed health plans that are built around better consumer information tools and support hold the promise of consumer engagement, but purchasers expect these features in all types of health plans. Regardless of plan type, simply shifting costs to consumers is a threat to access and adherence to evidence-based medicine. Comparative and interactive consumer information tools, coupled with provider performance transparency and payment reform, are needed to advance accountability and support consumers in getting the right care at the right time.

Application of Particle Swarm Optimization in Computer Aided Setup Planning

NASA Astrophysics Data System (ADS)

Kafashi, Sajad; Shakeri, Mohsen; Abedini, Vahid

2011-01-01

New researches are trying to integrate computer aided design (CAD) and computer aided manufacturing (CAM) environments. The role of process planning is to convert the design specification into manufacturing instructions. Setup planning has a basic role in computer aided process planning (CAPP) and significantly affects the overall cost and quality of machined part. This research focuses on the development for automatic generation of setups and finding the best setup plan in feasible condition. In order to computerize the setup planning process, three major steps are performed in the proposed system: a) Extraction of machining data of the part. b) Analyzing and generation of all possible setups c) Optimization to reach the best setup plan based on cost functions. Considering workshop resources such as machine tool, cutter and fixture, all feasible setups could be generated. Then the problem is adopted with technological constraints such as TAD (tool approach direction), tolerance relationship and feature precedence relationship to have a completely real and practical approach. The optimal setup plan is the result of applying the PSO (particle swarm optimization) algorithm into the system using cost functions. A real sample part is illustrated to demonstrate the performance and productivity of the system.

Human Factors Evaluations of Two-Dimensional Spacecraft Conceptual Layouts

NASA Technical Reports Server (NTRS)

Kennedy, Kriss J.; Toups, Larry D.; Rudisill, Marianne

2010-01-01

Much of the human factors work done in support of the NASA Constellation lunar program has been with low fidelity mockups. These volumetric replicas of the future lunar spacecraft allow researchers to insert test subjects from the engineering and astronaut population and evaluate the vehicle design as the test subjects perform simulations of various operational tasks. However, lunar outpost designs must be evaluated without the use of mockups, creating a need for evaluation tools that can be performed on two-dimension conceptual spacecraft layouts, such as floor plans. A tool based on the Cooper- Harper scale was developed and applied to one lunar scenario, enabling engineers to select between two competing floor plan layouts. Keywords: Constellation, human factors, tools, processes, habitat, outpost, Net Habitable Volume, Cooper-Harper.

On the design of computer-based models for integrated environmental science.

PubMed

McIntosh, Brian S; Jeffrey, Paul; Lemon, Mark; Winder, Nick

2005-06-01

The current research agenda in environmental science is dominated by calls to integrate science and policy to better understand and manage links between social (human) and natural (nonhuman) processes. Freshwater resource management is one area where such calls can be heard. Designing computer-based models for integrated environmental science poses special challenges to the research community. At present it is not clear whether such tools, or their outputs, receive much practical policy or planning application. It is argued that this is a result of (1) a lack of appreciation within the research modeling community of the characteristics of different decision-making processes including policy, planning, and (2) participation, (3) a lack of appreciation of the characteristics of different decision-making contexts, (4) the technical difficulties in implementing the necessary support tool functionality, and (5) the socio-technical demands of designing tools to be of practical use. This article presents a critical synthesis of ideas from each of these areas and interprets them in terms of design requirements for computer-based models being developed to provide scientific information support for policy and planning. Illustrative examples are given from the field of freshwater resources management. Although computer-based diagramming and modeling tools can facilitate processes of dialogue, they lack adequate simulation capabilities. Component-based models and modeling frameworks provide such functionality and may be suited to supporting problematic or messy decision contexts. However, significant technical (implementation) and socio-technical (use) challenges need to be addressed before such ambition can be realized.

Development of a Design Tool for Planning Aqueous Amendment Injection Systems Permanganate Design Tool

DTIC Science & Technology

2010-08-01

CSTR continuously stirred tank reactors CT contact time EDB ethylene dibromide ESTCP Environmental Security Technology Certification Program...63 6.2 Simulating Oxidant Distribution Using a Series of CSTRs -------------------- 63 6.2.1 Model...SIMULATING OXIDANT DISTRIBUTION USING A SERIES OF CSTRS 6.2.1 MODEL DEVELOPMENT The transport and consumption of permanganate are simulated within the

77 FR 70444 - Agency Information Collection Activities: Submission for OMB Review; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2012-11-26

... Collection Request: New collection; Title: Medicare Plan Finder Experiment; Use: The mission of the Centers... experimental design to assess the effectiveness of two potential enhancements to the Medicare Plan Finder tool... experiment is to test the effects of two prospective enhancements to the Medicare Plan Finder (MPF) Web site...

Austin Community College Learning Resource Services Strategic Plan, 1992-1997.

ERIC Educational Resources Information Center

Austin Community Coll., TX.

Designed as a planning tool and a statement of philosophy and mission, this five-part strategic planning report provides information on the activities, goals, and review processes of the Learning Resource Services (LRS) at Austin Community College in Austin, Texas. The LRS combines library services, access to computer terminals, and other…

The Application of Concurrent Engineering Tools and Design Structure Matrix in Designing Tire

NASA Astrophysics Data System (ADS)

Ginting, Rosnani; Fachrozi Fitra Ramadhan, T.

2016-02-01

The development of automobile industry in Indonesia is growing rapidly. This phenomenon causes companies related to the automobile industry such as tire industry must develop products based on customers’ needs and considering the timeliness of delivering the product to the customer. It could be reached by applying strategic planning in developing an integrated concept of product development. This research was held in PT. XYZ that applied the sequential approach in designing and developing products. The need to improve in one stage of product development could occur re-designing that needs longer time in developing a new product. This research is intended to get an integrated product design concept of tire pertaining to the customer's needs using Concurrent Engineering Tools by implementing the two-phased of product development. The implementation of Concurrent Engineering approach results in applying the stage of project planning, conceptual design, and product modules. The product modules consist of four modules that using Product Architecture - Design Structure Matrix to ease the designing process of new product development.

78 FR 45598 - Industry Forums on the Next ITS Strategic Plan; Notice of Public Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-29

... of critical thinking tools designed to draw out information to identify and validate focus areas for... inputs through an online tool, IdeaScale at http://itsstrategicplan.ideascale.com . The first facilitated...

From community preferences to design: Investigation of human-centered optimization algorithms in web-based, democratic planning of watershed restoration

NASA Astrophysics Data System (ADS)

Babbar-Sebens, M.; Mukhopadhyay, S.

2014-12-01

Web 2.0 technologies are useful resources for reaching out to larger stakeholder communities and involve them in policy making and planning efforts. While these technologies have been used in the past to support education and communication endeavors, we have developed a novel, web-based, interactive planning tool that involves the community in using science-based methods for the design of potential runoff management strategies on their landscape. The tool, Watershed REstoration using Spatio-Temporal Optimization of Resources (WRESTORE), uses a democratic voting process coupled with visualization interfaces, computational simulation and optimization models, and user modeling techniques to support a human-centered design approach. The tool can be used to engage diverse watershed stakeholders and landowners via the internet, thereby improving opportunities for outreach and collaborations. Users are able to (a) design multiple types of conservation practices at their field-scale catchment and at the entire watershed scale, (b) examine impacts and limitations of their decisions on their neighboring catchments and on the entire watershed, (c) compare alternatives via a cost-benefit analysis, (d) vote on their "favorite" designs based on their preferences and constraints, and (e) propose their "favorite" alternatives to policy makers and other stakeholders. In this presentation, we will demonstrate the effectiveness of WRESTORE for designing alternatives of conservation practices to reduce peak flows in a Midwestern watershed, present results on multiple approaches for engaging with larger communities, and discuss potential for future developments.

Use of technology to support information needs for continuity of operations planning in public health: a systematic review.

PubMed

Reeder, Blaine; Turner, Anne; Demiris, George

2010-01-01

Continuity of operations planning focuses on an organization's ability to deliver essential services before, during and after an emergency. Public health leaders must make decisions based on information from many sources and their information needs are often facilitated or hindered by technology. The aim of this study is to provide a systematic review of studies of technology projects that address public health continuity of operations planning information needs and to discuss patterns, themes, and challenges to inform the design of public health continuity of operations information systems. To return a comprehensive results set in an under-explored area, we searched broadly in the Medline and EBSCOHost bibliographic databases using terms from prior work in public health emergency management and continuity of operations planning in other domains. In addition, we manually searched the citation lists of publications included for review. A total of 320 publications were reviewed. Twenty studies were identified for inclusion (twelve risk assessment decision support tools, six network and communications-enabled decision support tools, one training tool and one dedicated video-conferencing tool). Levels of implementation for information systems in the included studies range from proposed frameworks to operational systems. There is a general lack of documented efforts in the scientific literature for technology projects about public health continuity of operations planning. Available information about operational information systems suggest inclusion of public health practitioners in the design process as a factor in system success.

Evaluating the Effectiveness of Web-based Climate Resilience Decision Support Tools: Insights from Coastal New Jersey

NASA Astrophysics Data System (ADS)

Brady, M.; Lathrop, R.; Auermuller, L. M.; Leichenko, R.

2016-12-01

Despite the recent surge of Web-based decision support tools designed to promote resiliency in U.S. coastal communities, to-date there has been no systematic study of their effectiveness. This study demonstrates a method to evaluate important aspects of effectiveness of four Web map tools designed to promote consideration of climate risk information in local decision-making and planning used in coastal New Jersey. In summer 2015, the research team conducted in-depth phone interviews with users of one regulatory and three non-regulatory Web map tools using a semi-structured questionnaire. The interview and analysis design drew from a combination of effectiveness evaluation approaches developed in software and information usability, program evaluation, and management information system (MIS) research. Effectiveness assessment results were further analyzed and discussed in terms of conceptual hierarchy of system objectives defined by respective tool developer and user organizations represented in the study. Insights from the interviews suggest that users rely on Web tools as a supplement to desktop and analog map sources because they provide relevant and up-to-date information in a highly accessible and mobile format. The users also reported relying on multiple information sources and comparison between digital and analog sources for decision support. However, with respect to this decision support benefit, users were constrained by accessibility factors such as lack of awareness and training with some tools, lack of salient information such as planning time horizons associated with future flood scenarios, and environmental factors such as mandates restricting some users to regulatory tools. Perceptions of Web tool credibility seem favorable overall, but factors including system design imperfections and inconsistencies in data and information across platforms limited trust, highlighting a need for better coordination between tools. Contributions of the study include user feedback on web-tool system designs consistent with collaborative methods for enhancing usability and a systematic look at effectiveness that includes both user perspectives and consideration of developer and organizational objectives.

Collaborative Mission Design at NASA Langley Research Center

NASA Technical Reports Server (NTRS)

Gough, Kerry M.; Allen, B. Danette; Amundsen, Ruth M.

2005-01-01

NASA Langley Research Center (LaRC) has developed and tested two facilities dedicated to increasing efficiency in key mission design processes, including payload design, mission planning, and implementation plan development, among others. The Integrated Design Center (IDC) is a state-of-the-art concurrent design facility which allows scientists and spaceflight engineers to produce project designs and mission plans in a real-time collaborative environment, using industry-standard physics-based development tools and the latest communication technology. The Mission Simulation Lab (MiSL), a virtual reality (VR) facility focused on payload and project design, permits engineers to quickly translate their design and modeling output into enhanced three-dimensional models and then examine them in a realistic full-scale virtual environment. The authors were responsible for envisioning both facilities and turning those visions into fully operational mission design resources at LaRC with multiple advanced capabilities and applications. In addition, the authors have created a synergistic interface between these two facilities. This combined functionality is the Interactive Design and Simulation Center (IDSC), a meta-facility which offers project teams a powerful array of highly advanced tools, permitting them to rapidly produce project designs while maintaining the integrity of the input from every discipline expert on the project. The concept-to-flight mission support provided by IDSC has shown improved inter- and intra-team communication and a reduction in the resources required for proposal development, requirements definition, and design effort.

Automated planning of tangential breast intensity-modulated radiotherapy using heuristic optimization.

PubMed

Purdie, Thomas G; Dinniwell, Robert E; Letourneau, Daniel; Hill, Christine; Sharpe, Michael B

2011-10-01

To present an automated technique for two-field tangential breast intensity-modulated radiotherapy (IMRT) treatment planning. A total of 158 planned patients with Stage 0, I, and II breast cancer treated using whole-breast IMRT were retrospectively replanned using automated treatment planning tools. The tools developed are integrated into the existing clinical treatment planning system (Pinnacle(3)) and are designed to perform the manual volume delineation, beam placement, and IMRT treatment planning steps carried out by the treatment planning radiation therapist. The automated algorithm, using only the radio-opaque markers placed at CT simulation as inputs, optimizes the tangential beam parameters to geometrically minimize the amount of lung and heart treated while covering the whole-breast volume. The IMRT parameters are optimized according to the automatically delineated whole-breast volume. The mean time to generate a complete treatment plan was 6 min, 50 s ± 1 min 12 s. For the automated plans, 157 of 158 plans (99%) were deemed clinically acceptable, and 138 of 158 plans (87%) were deemed clinically improved or equal to the corresponding clinical plan when reviewed in a randomized, double-blinded study by one experienced breast radiation oncologist. In addition, overall the automated plans were dosimetrically equivalent to the clinical plans when scored for target coverage and lung and heart doses. We have developed robust and efficient automated tools for fully inversed planned tangential breast IMRT planning that can be readily integrated into clinical practice. The tools produce clinically acceptable plans using only the common anatomic landmarks from the CT simulation process as an input. We anticipate the tools will improve patient access to high-quality IMRT treatment by simplifying the planning process and will reduce the effort and cost of incorporating more advanced planning into clinical practice. Crown Copyright © 2011. Published by Elsevier Inc. All rights reserved.

Development of an interactive GIS based work zone traffic control tool.

DOT National Transportation Integrated Search

2013-08-01

The purpose of this study was to include consideration for intersections into the previously created GIS traffic control planning tool. Available data for making intersection control calculations were collected and integrated into the design of the t...

Protecting Endangered Species: Do the Main Legislative Tools Work?

PubMed Central

Gibbs, Katherine E.; Currie, David J.

2012-01-01

It is critical to assess the effectiveness of the tools used to protect endangered species. The main tools enabled under the U.S. Endangered Species Act (ESA) to promote species recovery are funding, recovery plan development and critical habitat designation. Earlier studies sometimes found that statistically significant effects of these tools could be detected, but they have not answered the question of whether the effects were large enough to be biologically meaningful. Here, we ask: how much does the recovery status of ESA-listed species improve with the application of these tools? We used species' staus reports to Congress from 1988 to 2006 to quantify two measures of recovery for 1179 species. We related these to the amount of federal funding, years with a recovery plan, years with critical habitat designation, the amount of peer-reviewed scientific information, and time listed. We found that change in recovery status of listed species was, at best, only very weakly related to any of these tools. Recovery was positively related to the number of years listed, years with a recovery plan, and funding, however, these tools combined explain <13% of the variation in recovery status among species. Earlier studies that reported significant effects of these tools did not focus on effect sizes; however, they are in fact similarly small. One must conclude either that these tools are not very effective in promoting species' recovery, or (as we suspect) that species recovery data are so poor that it is impossible to tell whether the tools are effective or not. It is critically important to assess the effectiveness of tools used to promote species recovery; it is therefore also critically important to obtain population status data that are adequate to that task. PMID:22567111

Protecting endangered species: do the main legislative tools work?

PubMed

Gibbs, Katherine E; Currie, David J

2012-01-01

It is critical to assess the effectiveness of the tools used to protect endangered species. The main tools enabled under the U.S. Endangered Species Act (ESA) to promote species recovery are funding, recovery plan development and critical habitat designation. Earlier studies sometimes found that statistically significant effects of these tools could be detected, but they have not answered the question of whether the effects were large enough to be biologically meaningful. Here, we ask: how much does the recovery status of ESA-listed species improve with the application of these tools? We used species' staus reports to Congress from 1988 to 2006 to quantify two measures of recovery for 1179 species. We related these to the amount of federal funding, years with a recovery plan, years with critical habitat designation, the amount of peer-reviewed scientific information, and time listed. We found that change in recovery status of listed species was, at best, only very weakly related to any of these tools. Recovery was positively related to the number of years listed, years with a recovery plan, and funding, however, these tools combined explain <13% of the variation in recovery status among species. Earlier studies that reported significant effects of these tools did not focus on effect sizes; however, they are in fact similarly small. One must conclude either that these tools are not very effective in promoting species' recovery, or (as we suspect) that species recovery data are so poor that it is impossible to tell whether the tools are effective or not. It is critically important to assess the effectiveness of tools used to promote species recovery; it is therefore also critically important to obtain population status data that are adequate to that task.

Design and evaluation of a software prototype for participatory planning of environmental adaptations.

PubMed

Eriksson, J; Ek, A; Johansson, G

2000-03-01

A software prototype to support the planning process for adapting home and work environments for people with physical disabilities was designed and later evaluated. The prototype exploits low-cost three-dimensional (3-D) graphics products in the home computer market. The essential features of the prototype are: interactive rendering with optional hardware acceleration, interactive walk-throughs, direct manipulation tools for moving objects and measuring distances, and import of 3-D-objects from a library. A usability study was conducted, consisting of two test sessions (three weeks apart) and a final interview. The prototype was then tested and evaluated by representatives of future users: five occupational therapist students, and four persons with physical disability, with no previous experience of the prototype. Emphasis in the usability study was placed on the prototype's efficiency and learnability. We found that it is possible to realise a planning tool for environmental adaptations, both regarding usability and technical efficiency. The usability evaluation confirms our findings from previous case studies, regarding the relevance and positive attitude towards this kind of planning tool. Although the prototype was found to be satisfactorily efficient for the basic tasks, the paper presents several suggestions for improvement of future prototype versions.

Le Nouveau Manuel de Formation sur l'Elaboration et la Gestion des Projets. (The New Project Design and Management Workshop Training Manual).

ERIC Educational Resources Information Center

Peace Corps, Washington, DC. Information Collection and Exchange Div.

A french language version of a training manual that presents guidelines for planning and conducting a project design and management (PDM) workshop to teach Peace Corps volunteers to involve local community members in the process of using participatory analysis tools and planning and implementing projects meeting local desires and needs. The first…

Resource Allocation Planning Helper (RALPH): Lessons learned

NASA Technical Reports Server (NTRS)

Durham, Ralph; Reilly, Norman B.; Springer, Joe B.

1990-01-01

The current task of Resource Allocation Process includes the planning and apportionment of JPL's Ground Data System composed of the Deep Space Network and Mission Control and Computing Center facilities. The addition of the data driven, rule based planning system, RALPH, has expanded the planning horizon from 8 weeks to 10 years and has resulted in large labor savings. Use of the system has also resulted in important improvements in science return through enhanced resource utilization. In addition, RALPH has been instrumental in supporting rapid turn around for an increased volume of special what if studies. The status of RALPH is briefly reviewed and important lessons learned from the creation of an highly functional design team are focused on through an evolutionary design and implementation period in which an AI shell was selected, prototyped, and ultimately abandoned, and through the fundamental changes to the very process that spawned the tool kit. Principal topics include proper integration of software tools within the planning environment, transition from prototype to delivered to delivered software, changes in the planning methodology as a result of evolving software capabilities and creation of the ability to develop and process generic requirements to allow planning flexibility.

SU-E-T-595: Design of a Graphical User Interface for An In-House Monte Carlo Based Treatment Planning System: Planning and Contouring Tools

DOE Office of Scientific and Technical Information (OSTI.GOV)

EMAM, M; Eldib, A; Lin, M

2014-06-01

Purpose: An in-house Monte Carlo based treatment planning system (MC TPS) has been developed for modulated electron radiation therapy (MERT). Our preliminary MERT planning experience called for a more user friendly graphical user interface. The current work aimed to design graphical windows and tools to facilitate the contouring and planning process. Methods: Our In-house GUI MC TPS is built on a set of EGS4 user codes namely MCPLAN and MCBEAM in addition to an in-house optimization code, which was named as MCOPTIM. Patient virtual phantom is constructed using the tomographic images in DICOM format exported from clinical treatment planning systemsmore » (TPS). Treatment target volumes and critical structures were usually contoured on clinical TPS and then sent as a structure set file. In our GUI program we developed a visualization tool to allow the planner to visualize the DICOM images and delineate the various structures. We implemented an option in our code for automatic contouring of the patient body and lungs. We also created an interface window displaying a three dimensional representation of the target and also showing a graphical representation of the treatment beams. Results: The new GUI features helped streamline the planning process. The implemented contouring option eliminated the need for performing this step on clinical TPS. The auto detection option for contouring the outer patient body and lungs was tested on patient CTs and it was shown to be accurate as compared to that of clinical TPS. The three dimensional representation of the target and the beams allows better selection of the gantry, collimator and couch angles. Conclusion: An in-house GUI program has been developed for more efficient MERT planning. The application of aiding tools implemented in the program is time saving and gives better control of the planning process.« less

Decision Support Systems for Research and Management in Advanced Life Support

NASA Technical Reports Server (NTRS)

Rodriquez, Luis F.

2004-01-01

Decision support systems have been implemented in many applications including strategic planning for battlefield scenarios, corporate decision making for business planning, production planning and control systems, and recommendation generators like those on Amazon.com(Registered TradeMark). Such tools are reviewed for developing a similar tool for NASA's ALS Program. DSS are considered concurrently with the development of the OPIS system, a database designed for chronicling of research and development in ALS. By utilizing the OPIS database, it is anticipated that decision support can be provided to increase the quality of decisions by ALS managers and researchers.

[Health impact assessment methodology for urban planning projects in Andalusia (Spain)].

PubMed

Moya-Ruano, Luis A; Candau-Bejarano, Ana; Rodríguez-Rasero, Francisco J; Ruiz-Fernández, Josefa; Vela-Ríos, José

To describe the tool developed in Andalusia (Spain) to conduct an analysis and prospective assessment of health impacts from urban planning projects as well as the process followed to design it. On the one hand, direct and indirect relationships between urban setting and health were identified in light of the best scientific evidence available; and, on the other hand, methods and tools in impact assessment were reviewed. After the design of the tool, it was tested via both internal and external validation processes (meetings, workshops and interviews with key informants). The tool consists of seven phases, structured in two stages. A first descriptive stage shows how to obtain information about goals, objectives and general points pertaining the project and also to characterise the potentially affected population. The second one indicates, in several phases, how to identify and sort out potential impacts from the project using different supporting tools. Both in the testing phase and through its implementation since the entry into force of Andalusian Decree 169/2014 (16 June 2015) and forced all urban planning projects to be subjected to an Health Impact Assessment, this methodology has proved responsive, identifying major potential health impacts from the measures included in those projects. However, the tool has been shaped as a living tool and will be adapted in line with the experience acquired in its use. Copyright © 2017. Publicado por Elsevier España, S.L.U.

Lesson Plans To Advance Discussion of Ethical Issues.

ERIC Educational Resources Information Center

Swikle, Randy G.

2002-01-01

Presents lesson plans designed to enable high school students to recognize ethical issues involving the printed media and to give students practical experience in ethical decision-making using the newspaper as a learning tool. Includes 10 ethical issues and related case studies. (RS)

Supporting Beginning Teacher Planning and Enactment of Investigation-based Science Discussions: The Design and Use of Tools within Practice-based Teacher Education

NASA Astrophysics Data System (ADS)

Kademian, Sylvie M.

Current reform efforts prioritize science instruction that provides opportunities for students to engage in productive talk about scientific phenomena. Given the challenges teachers face enacting instruction that integrates science practices and science content, beginning teachers need support to develop the knowledge and teaching practices required to teach reform-oriented science lessons. Practice-based teacher education shows potential for supporting beginning teachers while they are learning to teach in this way. However, little is known about how beginning elementary teachers draw upon the types of support and tools associated with practice-based teacher education to learn to successfully enact this type of instruction. This dissertation addresses this gap by investigating how a practice-based science methods course using a suite of teacher educator-provided tools can support beginning teachers' planning and enactment of investigation-based science lessons. Using qualitative case study methodologies, this study drew on video-records, lesson plans, class assignments, and surveys from one cohort of 22 pre-service teachers (called interns in this study) enrolled in a year-long elementary education master of the arts and teaching certification program. Six focal interns were also interviewed at multiple time-points during the methods course. Similarities existed across the types of tools and teaching practices interns used most frequently to plan and enact investigation-based discussions. For the focal interns, use of four synergistic teaching practices throughout the lesson enactments (including consideration of students' initial ideas; use of open-ended questions to elicit, extend, and challenge ideas; connecting across students' ideas and the disciplinary core ideas; and use of a representation to organize and highlight students' ideas) appeared to lead to increased opportunities for students to share their ideas and engage in data analysis, argumentation and explanation construction. Student opportunities to engage in practices that prioritize scientific discourse also occurred when interns were using dialogic voice and the tools designed to foster development of teacher knowledge for facilitating investigation-based science discussions. However, several intern characteristics likely moderated or mediated intern use of tools, dialogic voice, and productive teaching practices to capitalize on student contributions. These characteristics included intern knowledge of the science content and practices and initial beliefs about science teaching. Missed opportunities to use a combination of several teaching practices and tools designed to foster the development of knowledge for science teaching resulted in fewer opportunities for students to engage in data analysis, argumentation based on evidence, and construction of scientific explanations. These findings highlight the potential of teacher-educator provided tools for supporting beginning teachers in learning to facilitate investigation-based discussions that capitalize on student contributions. These findings also help the field conceptualize how beginning teachers use tools and teaching practices to plan and enact investigation-based science lessons, and how intern characteristics relate to tool use and planned and enacted lessons. By analyzing the investigation-based science lessons holistically, this study begins to unpack the complexities of facilitating investigation-based discussions including the interplay between intern characteristics and tool use, and the ways intern engagement in synergistic teaching practices provide opportunities for students to engage in data analysis, explanation construction, and argumentation. This study also describes methodological implications for this type of whole-lesson analysis and comments on the need for further research investigating beginning teachers' use of tools over time. Finally, I propose the need for iterative design of scaffolds to further support beginning teacher facilitation of investigation-based science lessons.

Preservation Planning Program. Study Report. Iowa State University Library. Final Report.

ERIC Educational Resources Information Center

Galejs, John; And Others

This final report is a product of a Preservation Planning Program (PPP) self-study conducted by the Iowa State University, working with the Association of Research Libraries' (ARL) Office of Management Studies. The PPP is designed to put self-help tools into the hands of library staff responsible for developing plans and procedures for preserving…

Conceptualizing and Describing Teachers' Learning of Pedagogical Concepts

ERIC Educational Resources Information Center

González, María José; Gómez, Pedro

2014-01-01

In this paper, we propose a model to explore how teachers learn pedagogical concepts in teacher education programs that expect them to become competent in lesson planning. In this context, we view pedagogical concepts as conceptual and methodological tools that help teachers to design a lesson plan on a topic, implement this lesson plan and assess…

Science opportunity analyzer - a multi-mission approach to science planning

NASA Technical Reports Server (NTRS)

Streiffert, B. A.; Polanskey, C. A.; O'Reilly, T.; Colwell, J.

2003-01-01

In the past Science Planning for space missions has been comprised of using ad-hoc software toolscollected or reconstructed from previous missions, tools used by other groups who often speak a different 'technical' language or even 'the backs of envelopes'. In addition to the tools being rough, the work done with these tools often has had to be redone or at least re-entered when it came time to determine actual observations. Science Opportunity Analyzer (SOA), a Java-based application, has been built for scientists to enable them to identify/analyze observation opportunities and then, to create corresponding observation designs.

A comparative study of the Unified System for Orbit Computation and the Flight Design System. [computer programs for mission planning tasks associated with space shuttle

NASA Technical Reports Server (NTRS)

Maag, W.

1977-01-01

The Flight Design System (FDS) and the Unified System for Orbit Computation (USOC) are compared and described in relation to mission planning for the shuttle transportation system (STS). The FDS is designed to meet the requirements of a standardized production tool and the USOC is designed for rapid generation of particular application programs. The main emphasis in USOC is put on adaptability to new types of missions. It is concluded that a software system having a USOC-like structure, adapted to the specific needs of MPAD, would be appropriate to support planning tasks in the area unique to STS missions.

Work Plans.

ERIC Educational Resources Information Center

Zemsky, Robert; Shaman, Susan; Shapiro, Daniel B.

2001-01-01

Proposes a set of axioms, rules, and practical tools that campuses can use when they ask: What is our market position and is repositioning possible? The tools are designed to help higher education institutional leaders and researchers achieve the goal of being both market smart and mission centered. (EV)

3D treatment planning systems.

PubMed

Saw, Cheng B; Li, Sicong

2018-01-01

Three-dimensional (3D) treatment planning systems have evolved and become crucial components of modern radiation therapy. The systems are computer-aided designing or planning softwares that speed up the treatment planning processes to arrive at the best dose plans for the patients undergoing radiation therapy. Furthermore, the systems provide new technology to solve problems that would not have been considered without the use of computers such as conformal radiation therapy (CRT), intensity-modulated radiation therapy (IMRT), and volumetric modulated arc therapy (VMAT). The 3D treatment planning systems vary amongst the vendors and also the dose delivery systems they are designed to support. As such these systems have different planning tools to generate the treatment plans and convert the treatment plans into executable instructions that can be implemented by the dose delivery systems. The rapid advancements in computer technology and accelerators have facilitated constant upgrades and the introduction of different and unique dose delivery systems than the traditional C-arm type medical linear accelerators. The focus of this special issue is to gather relevant 3D treatment planning systems for the radiation oncology community to keep abreast of technology advancement by assess the planning tools available as well as those unique "tricks or tips" used to support the different dose delivery systems. Copyright © 2018 American Association of Medical Dosimetrists. Published by Elsevier Inc. All rights reserved.

Translating research into practice through user-centered design: An application for osteoarthritis healthcare planning.

PubMed

Carr, Eloise Cj; Babione, Julie N; Marshall, Deborah

2017-08-01

To identify the needs and requirements of the end users, to inform the development of a user-interface to translate an existing evidence-based decision support tool into a practical and usable interface for health service planning for osteoarthritis (OA) care. We used a user-centered design (UCD) approach that emphasized the role of the end-users and is well-suited to knowledge translation (KT). The first phase used a needs assessment focus group (n=8) and interviews (n=5) with target users (health care planners) within a provincial health care organization. The second phase used a participatory design approach, with two small group sessions (n=6) to explore workflow, thought processes, and needs of intended users. The needs assessment identified five design recommendations: ensuring the user-interface supports the target user group, allowing for user-directed data explorations, input parameter flexibility, clear presentation, and provision of relevant definitions. The second phase identified workflow insights from a proposed scenario. Graphs, the need for a visual overview of the data, and interactivity were key considerations to aid in meaningful use of the model and knowledge translation. A UCD approach is well suited to identify health care planners' requirements when using a decision support tool to improve health service planning and management of OA. We believe this is one of the first applications to be used in planning for health service delivery. We identified specific design recommendations that will increase user acceptability and uptake of the user-interface and underlying decision support tool in practice. Our approach demonstrated how UCD can be used to enable knowledge translation. Copyright © 2017 Elsevier B.V. All rights reserved.

The Culture Audit: A Leadership Tool for Assessment and Strategic Planning in Diverse Schools and Colleges

ERIC Educational Resources Information Center

Bustamante, Rebecca M.

2006-01-01

This module is designed to introduce educational leaders to an organizational assessment tool called a "culture audit." Literature on organizational cultural competence suggests that culture audits are a valuable tool for determining how well school policies, programs, and practices respond to the needs of diverse groups and prepare…

Climate project screening tool: an aid for climate change adaptation

Treesearch

Toni Lyn Morelli; Sharon Yeh; Nikola M. Smith; Mary Beth Hennessy; Constance I. Millar

2012-01-01

To address the impacts of climate change, land managers need techniques for incorporating adaptation into ongoing or impending projects. We present a new tool, the Climate Project Screening Tool (CPST), for integrating climate change considerations into project planning as well as for developing concrete adaptation options for land managers. We designed CPST as part of...

A Human-Centered Command and Control (C2) Assessment of an Experimental Campaign Planning Tool

DTIC Science & Technology

2014-04-01

and control (team without the CPT) groups . The two groups were designed to have an equal number of members; however, one member of the experimental...the researchers to analyze the planning process and outcomes. 3.3 Design and Procedure An experimental versus control group design was implemented...the post -PFnet (figure 16b). Within the PFnets, a concept can be focused on in order to identify how the individual or group is defining or

Design and evaluation of a disaster preparedness logistics tool.

PubMed

Neches, Robert; Ryutov, Tatyana; Kichkaylo, Tatiana; Burke, Rita V; Claudius, Ilene A; Upperman, Jeffrey S

2009-01-01

The purpose of this article is to describe the development and testing of the Pediatric Emergency Decision Support System (PEDSS), a dynamic tool for pediatric victim disaster planning. This is a descriptive article outlining an innovative automated approach to pediatric decision support and disaster planning. Disaster Resource Centers and umbrella hospitals in Los Angeles County. The authors use a model set of hypothetical patients for our pediatric disaster planning approach. The authors developed the PEDSS software to accomplish two goals: (a) core that supports user interaction and data management requirements (e.g., accessing demographic information about a healthcare facility's catchment area) and (b) set of modules each addressing a critical disaster preparation issue. The authors believe the PEDSS tool will help hospital disaster response personnel produce and maintain disaster response plans that apply best practice pediatric recommendations to their particular local conditions and requirements.

SU-E-T-43: A Methodology for Quality Control of IMPT Treatment Plan Based On VMAT Plan

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jiang, S; Tianjin Medical University Cancer Institute and Hospital; Yang, Y

Purpose: IMPT plan design is highly dependent on planner’s experiences. VMAT plan design is relatively mature and can even be automated. The quality of IMPT plan designed by in-experienced planner could be inferior to that of VMAT plan designed by experienced planner or automatic planning software. Here we introduce a method for designing IMPT plan based on VMAT plan to ensure the IMPT plan be superior to IMRT/VMAT plan for majority clinical scenario. Methods: To design a new IMPT plan, a VMAT plan is first generated either by experienced planner or by in-house developed automatic planning system. An in-house developedmore » tool is used to generate the dose volume constrains for the IMPT plan as plan template to Eclipse TPS. The beam angles for IMPT plan are selected based on the preferred angles in the VMAT plan. IMPT plan is designed by importing the plan objectives generated from VMAT plan. Majority thoracic IMPT plans are designed using this plan approach in our center. In this work, a thoracic IMPT plan under RTOG 1308 protocol is selected to demonstrate the effectiveness and efficiency of this approach. The dosimetric indices of IMPT are compared with VMAT plan. Results: The PTV D95, lung V20, MLD, mean heart dose, esophagus D1, cord D1 are 70Gy, 31%, 17.8Gy, 25.5Gy, 73Gy, 45Gy for IMPT plan and 65.3Gy, 34%, 21.6Gy, 35Gy, 74Gy, 48Gy for VMAT plan. For majority cases, the high dose region of the normal tissue which is in proximity of PTV is comparable between IMPT and VMAT plan. The low dose region of the IMPT plan is significantly better than VMAT plan. Conclusion: Using the knowledge gained in VMAT plan design can help efficiently and effectively design high quality IMPT plan. The quality of IMPT plan can be controlled to ensure the superiority of IMPT plan compared to VMAT/IMRT plan.« less

Advanced Free Flight Planner and Dispatcher's Workstation: Preliminary Design Specification

NASA Technical Reports Server (NTRS)

Wilson, J.; Wright, C.; Couluris, G. J.

1997-01-01

The National Aeronautics and Space Administration (NASA) has implemented the Advanced Air Transportation Technology (AATT) program to investigate future improvements to the national and international air traffic management systems. This research, as part of the AATT program, developed preliminary design requirements for an advanced Airline Operations Control (AOC) dispatcher's workstation, with emphasis on flight planning. This design will support the implementation of an experimental workstation in NASA laboratories that would emulate AOC dispatch operations. The work developed an airline flight plan data base and specified requirements for: a computer tool for generation and evaluation of free flight, user preferred trajectories (UPT); the kernel of an advanced flight planning system to be incorporated into the UPT-generation tool; and an AOC workstation to house the UPT-generation tool and to provide a real-time testing environment. A prototype for the advanced flight plan optimization kernel was developed and demonstrated. The flight planner uses dynamic programming to search a four-dimensional wind and temperature grid to identify the optimal route, altitude and speed for successive segments of a flight. An iterative process is employed in which a series of trajectories are successively refined until the LTPT is identified. The flight planner is designed to function in the current operational environment as well as in free flight. The free flight environment would enable greater flexibility in UPT selection based on alleviation of current procedural constraints. The prototype also takes advantage of advanced computer processing capabilities to implement more powerful optimization routines than would be possible with older computer systems.

Multisite Assessment of Nursing Continuing Education Learning Needs Using an Electronic Tool.

PubMed

Winslow, Susan; Jackson, Stephanie; Cook, Lesley; Reed, Joanne Williams; Blakeney, Keshia; Zimbro, Kathie; Parker, Cindy

2016-02-01

A continued education needs assessment and associated education plan are required for organizations on the journey for American Nurses Credentialing Center Magnet® designation. Leveraging technology to support the assessment and analysis of continuing education needs was a new venture for a 12-hospital regional health system. The purpose of this performance improvement project was to design and conduct an enhanced process to increase the efficiency and effectiveness of gathering data on nurses' preferences and increase nurse satisfaction with the learner assessment portion of the process. Educators trialed the use of a standardized approach via an electronic survey tool to replace the highly variable processes previously used. Educators were able to view graphical summary of responses by category and setting, which substantially decreased analysis and action planning time for education implementation plans at the system, site, or setting level. Based on these findings, specific continuing education action plans were drafted for each category and classification of nurses. Copyright 2016, SLACK Incorporated.

Geographic information system-based healthcare waste management planning for treatment site location and optimal transportation routeing.

PubMed

Shanmugasundaram, Jothiganesh; Soulalay, Vongdeuane; Chettiyappan, Visvanathan

2012-06-01

In Lao People's Democratic Republic (Lao PDR), a growth of healthcare centres, and the environmental hazards and public health risks typically accompanying them, increased the need for healthcare waste (HCW) management planning. An effective planning of an HCW management system including components such as the treatment plant siting and an optimized routeing system for collection and transportation of waste is deemed important. National government offices at developing countries often lack the proper tools and methodologies because of the high costs usually associated with them. However, this study attempts to demonstrate the use of an inexpensive GIS modelling tool for healthcare waste management in the country. Two areas were designed for this study on HCW management, including: (a) locating centralized treatment plants and designing optimum travel routes for waste collection from nearby healthcare facilities; and (b) utilizing existing hospital incinerators and designing optimum routes for collecting waste from nearby healthcare facilities. Spatial analysis paved the way to understand the spatial distribution of healthcare wastes and to identify hotspots of higher waste generating locations. Optimal route models were designed for collecting and transporting HCW to treatment plants, which also highlights constraints in collecting and transporting waste for treatment and disposal. The proposed model can be used as a decision support tool for the efficient management of hospital wastes by government healthcare waste management authorities and hospitals.

Design of automation tools for management of descent traffic

NASA Technical Reports Server (NTRS)

Erzberger, Heinz; Nedell, William

1988-01-01

The design of an automated air traffic control system based on a hierarchy of advisory tools for controllers is described. Compatibility of the tools with the human controller, a key objective of the design, is achieved by a judicious selection of tasks to be automated and careful attention to the design of the controller system interface. The design comprises three interconnected subsystems referred to as the Traffic Management Advisor, the Descent Advisor, and the Final Approach Spacing Tool. Each of these subsystems provides a collection of tools for specific controller positions and tasks. This paper focuses primarily on the Descent Advisor which provides automation tools for managing descent traffic. The algorithms, automation modes, and graphical interfaces incorporated in the design are described. Information generated by the Descent Advisor tools is integrated into a plan view traffic display consisting of a high-resolution color monitor. Estimated arrival times of aircraft are presented graphically on a time line, which is also used interactively in combination with a mouse input device to select and schedule arrival times. Other graphical markers indicate the location of the fuel-optimum top-of-descent point and the predicted separation distances of aircraft at a designated time-control point. Computer generated advisories provide speed and descent clearances which the controller can issue to aircraft to help them arrive at the feeder gate at the scheduled times or with specified separation distances. Two types of horizontal guidance modes, selectable by the controller, provide markers for managing the horizontal flightpaths of aircraft under various conditions. The entire system consisting of descent advisor algorithm, a library of aircraft performance models, national airspace system data bases, and interactive display software has been implemented on a workstation made by Sun Microsystems, Inc. It is planned to use this configuration in operational evaluations at an en route center.

Application of Mathematical and Three-Dimensional Computer Modeling Tools in the Planning of Processes of Fuel and Energy Complexes

NASA Astrophysics Data System (ADS)

Aksenova, Olesya; Nikolaeva, Evgenia; Cehlár, Michal

2017-11-01

This work aims to investigate the effectiveness of mathematical and three-dimensional computer modeling tools in the planning of processes of fuel and energy complexes at the planning and design phase of a thermal power plant (TPP). A solution for purification of gas emissions at the design development phase of waste treatment systems is proposed employing mathematical and three-dimensional computer modeling - using the E-nets apparatus and the development of a 3D model of the future gas emission purification system. Which allows to visualize the designed result, to select and scientifically prove economically feasible technology, as well as to ensure the high environmental and social effect of the developed waste treatment system. The authors present results of a treatment of planned technological processes and the system for purifying gas emissions in terms of E-nets. using mathematical modeling in the Simulink application. What allowed to create a model of a device from the library of standard blocks and to perform calculations. A three-dimensional model of a system for purifying gas emissions has been constructed. It allows to visualize technological processes and compare them with the theoretical calculations at the design phase of a TPP and. if necessary, make adjustments.

Anatomical information in radiation treatment planning.

PubMed

Kalet, I J; Wu, J; Lease, M; Austin-Seymour, M M; Brinkley, J F; Rosse, C

1999-01-01

We report on experience and insights gained from prototyping, for clinical radiation oncologists, a new access tool for the University of Washington Digital Anatomist information resources. This access tool is designed to integrate with a radiation therapy planning (RTP) system in use in a clinical setting. We hypothesize that the needs of practitioners in a clinical setting are different from the needs of students, the original targeted users of the Digital Anatomist system, but that a common knowledge resource can serve both. Our prototype was designed to help define those differences and study the feasibility of a full anatomic reference system that will support both clinical radiation therapy and all the existing educational applications.

Promoting information sharing for multijurisdictional public health emergency preparedness.

PubMed

Grier, Nancy L; Homish, Gregory G; Rowe, Donald W; Barrick, Christopher

2011-01-01

The objective was to assess the planning needs of emergency management and public health professionals to provide a flexible and comprehensive planning tool. This study first assessed the needs of emergency management and public health professionals via an online survey. On the basis of results of the assessment, pertinent information was collected and organized into an online resource tool. The assessment was designed to address the needs of local, state, and federal government administrators working in emergency management and public health. The online tool was designed for use by any entity that functions to promote public health in the event of an emergency. Sixty-four participants completed the assessment survey. Seven states were represented. Most participants were senior-level administrators or management-level employees and were employed in public health, emergency, or bioterrorism preparedness, or in emergency medical services. Needs assessment for preparedness tools. The results of the survey identified a need for increased access to information (especially concerning liability issues and authority to enter into agreements) and high levels of interest in the availability of an online planning tool. The majority (80.7%) of respondents indicated an ability to locate and quantify resources within their own jurisdiction but only about half (42.9%) could do the same for resources outside of their jurisdiction. Finally, 71.9% reported having no assessment tool to measure emergency capacity and limitations. Planning for cross-border and multijurisdictional emergencies depends on access to pertinent information and the feasibility of attaining such information. The creation of a comprehensive guide to multijurisdictional collaborations, with its self-assessment checklists, can easily provide such information to emergency. In addition, information sharing and increased collaboration can lead to increased utilization of emergency preparedness best practices.

Aerospace Systems Design in NASA's Collaborative Engineering Environment

NASA Technical Reports Server (NTRS)

Monell, Donald W.; Piland, William M.

1999-01-01

Past designs of complex aerospace systems involved an environment consisting of collocated design teams with project managers, technical discipline experts, and other experts (e.g. manufacturing and systems operations). These experts were generally qualified only on the basis of past design experience and typically had access to a limited set of integrated analysis tools. These environments provided less than desirable design fidelity, often lead to the inability of assessing critical programmatic and technical issues (e.g., cost risk, technical impacts), and generally derived a design that was not necessarily optimized across the entire system. The continually changing, modern aerospace industry demands systems design processes that involve the best talent available (no matter where it resides) and access to the best design and analysis tools. A solution to these demands involves a design environment referred to as collaborative engineering. The collaborative engineering environment evolving within the National Aeronautics and Space Administration (NASA) is a capability that enables the Agency's engineering infrastructure to interact and use the best state-of-the-art tools and data across organizational boundaries. Using collaborative engineering, the collocated team is replaced with an interactive team structure where the team members are geographically distributed and the best engineering talent can be applied to the design effort regardless of physical location. In addition, a more efficient, higher quality design product is delivered by bringing together the best engineering talent with more up-to-date design and analysis tools. These tools are focused on interactive, multidisciplinary design and analysis with emphasis on the complete life cycle of the system, and they include nontraditional, integrated tools for life cycle cost estimation and risk assessment. NASA has made substantial progress during the last two years in developing a collaborative engineering environment. NASA is planning to use this collaborative engineering infrastructure to provide better aerospace systems life cycle design and analysis, which includes analytical assessment of the technical and programmatic aspects of a system from "cradle to grave." This paper describes the recent NASA developments in the area of collaborative engineering, the benefits (realized and anticipated) of using the developed capability, and the long-term plans for implementing this capability across the Agency.

Aerospace Systems Design in NASA's Collaborative Engineering Environment

NASA Technical Reports Server (NTRS)

Monell, Donald W.; Piland, William M.

2000-01-01

Past designs of complex aerospace systems involved an environment consisting of collocated design teams with project managers, technical discipline experts, and other experts (e.g., manufacturing and systems operation). These experts were generally qualified only on the basis of past design experience and typically had access to a limited set of integrated analysis tools. These environments provided less than desirable design fidelity, often lead to the inability of assessing critical programmatic and technical issues (e.g., cost, risk, technical impacts), and generally derived a design that was not necessarily optimized across the entire system. The continually changing, modern aerospace industry demands systems design processes that involve the best talent available (no matter where it resides) and access to the the best design and analysis tools. A solution to these demands involves a design environment referred to as collaborative engineering. The collaborative engineering environment evolving within the National Aeronautics and Space Administration (NASA) is a capability that enables the Agency's engineering infrastructure to interact and use the best state-of-the-art tools and data across organizational boundaries. Using collaborative engineering, the collocated team is replaced with an interactive team structure where the team members are geographical distributed and the best engineering talent can be applied to the design effort regardless of physical location. In addition, a more efficient, higher quality design product is delivered by bringing together the best engineering talent with more up-to-date design and analysis tools. These tools are focused on interactive, multidisciplinary design and analysis with emphasis on the complete life cycle of the system, and they include nontraditional, integrated tools for life cycle cost estimation and risk assessment. NASA has made substantial progress during the last two years in developing a collaborative engineering environment. NASA is planning to use this collaborative engineering engineering infrastructure to provide better aerospace systems life cycle design and analysis, which includes analytical assessment of the technical and programmatic aspects of a system from "cradle to grave." This paper describes the recent NASA developments in the area of collaborative engineering, the benefits (realized and anticipated) of using the developed capability, and the long-term plans for implementing this capability across Agency.

Aerospace Systems Design in NASA's Collaborative Engineering Environment

NASA Astrophysics Data System (ADS)

Monell, Donald W.; Piland, William M.

2000-07-01

Past designs of complex aerospace systems involved an environment consisting of collocated design teams with project managers, technical discipline experts, and other experts (e.g., manufacturing and systems operations). These experts were generally qualified only on the basis of past design experience and typically had access to a limited set of integrated analysis tools. These environments provided less than desirable design fidelity, often led to the inability of assessing critical programmatic and technical issues (e.g., cost, risk, technical impacts), and generally derived a design that was not necessarily optimized across the entire system. The continually changing, modern aerospace industry demands systems design processes that involve the best talent available (no matter where it resides) and access to the best design and analysis tools. A solution to these demands involves a design environment referred to as collaborative engineering. The collaborative engineering environment evolving within the National Aeronautics and Space Administration (NASA) is a capability that enables the Agency's engineering infrastructure to interact and use the best state-of-the-art tools and data across organizational boundaries. Using collaborative engineering, the collocated team is replaced with an interactive team structure where the team members are geographically distributed and the best engineering talent can be applied to the design effort regardless of physical location. In addition, a more efficient, higher quality design product is delivered by bringing together the best engineering talent with more up-to-date design and analysis tools. These tools are focused on interactive, multidisciplinary design and analysis with emphasis on the complete life cycle of the system, and they include nontraditional, integrated tools for life cycle cost estimation and risk assessment. NASA has made substantial progress during the last two years in developing a collaborative engineering environment. NASA is planning to use this collaborative engineering infrastructure to provide better aerospace systems life cycle design and analysis, which includes analytical assessment of the technical and programmatic aspects of a system from "cradle to grave." This paper describes the recent NASA developments in the area of collaborative engineering, the benefits (realized and anticipated) of using the developed capability, and the long-term plans for implementing this capability across the Agency.

Developing a Graphical User Interface for the ALSS Crop Planning Tool

NASA Technical Reports Server (NTRS)

Koehlert, Erik

1997-01-01

The goal of my project was to create a graphical user interface for a prototype crop scheduler. The crop scheduler was developed by Dr. Jorge Leon and Laura Whitaker for the ALSS (Advanced Life Support System) program. The addition of a system-independent graphical user interface to the crop planning tool will make the application more accessible to a wider range of users and enhance its value as an analysis, design, and planning tool. My presentation will demonstrate the form and functionality of this interface. This graphical user interface allows users to edit system parameters stored in the file system. Data on the interaction of the crew, crops, and waste processing system with the available system resources is organized and labeled. Program output, which is stored in the file system, is also presented to the user in performance-time plots and organized charts. The menu system is designed to guide the user through analysis and decision making tasks, providing some help if necessary. The Java programming language was used to develop this interface in hopes of providing portability and remote operation.

Developing a Framework for Effective Network Capacity Planning

NASA Technical Reports Server (NTRS)

Yaprak, Ece

2005-01-01

As Internet traffic continues to grow exponentially, developing a clearer understanding of, and appropriately measuring, network's performance is becoming ever more critical. An important challenge faced by the Information Resources Directorate (IRD) at the Johnson Space Center in this context remains not only monitoring and maintaining a secure network, but also better understanding the capacity and future growth potential boundaries of its network. This requires capacity planning which involves modeling and simulating different network alternatives, and incorporating changes in design as technologies, components, configurations, and applications change, to determine optimal solutions in light of IRD's goals, objectives and strategies. My primary task this summer was to address this need. I evaluated network-modeling tools from OPNET Technologies Inc. and Compuware Corporation. I generated a baseline model for Building 45 using both tools by importing "real" topology/traffic information using IRD's various network management tools. I compared each tool against the other in terms of the advantages and disadvantages of both tools to accomplish IRD's goals. I also prepared step-by-step "how to design a baseline model" tutorial for both OPNET and Compuware products.

Continuous Improvement of Team Assignments: Using a Web-based Tool and the Plan-Do-Check-Act Cycle in Design and Redesign

ERIC Educational Resources Information Center

Morgan, Shona D.; Stewart, Alice C.

2017-01-01

The purpose of this brief is twofold. First, it describes a useful template for business instructors to improve teamwork assignment design and efficacy; and second, it provides an example of how to use data collected and analyzed from a Web-based tool, Comprehensive Assessment of Team Member Effectiveness (CATME). Though CATME has been the subject…

Integrating an EMR-based Transition Planning Tool for CYSHCN at a Children's Hospital: A Quality Improvement Project to Increase Provider Use and Satisfaction

PubMed Central

Wiemann, Constance M.; Hergenroeder, Albert C.; Bartley, Krystle A.; Sanchez-Fournier, Blanca; Hilliard, Marisa E.; Warren, Laura J.; Graham, Sarah C.

2016-01-01

An electronic medical record (EMR)-based transition planning tool (TPT) designed to facilitate transition from pediatric to adult-based health care for youth (16–25 years) with special health care needs was introduced at a large children's hospital. Activities to increase provider use were implemented in five plan–do–study–act cycles. Overall, 22 of 25 (88%) consenting providers in four pediatric subspecialty services used the TPT during 303 patient encounters, with nurses and case-managers the top users and physicians the least likely users. Use was highest with intensive technical assistance and following the introduction of an upgraded tool. Provider satisfaction with the TPT and self-reported transition planning activities notably increased across the PDSA cycles. PMID:26209173

Modeling Off-Nominal Recovery in NextGen Terminal-Area Operations

NASA Technical Reports Server (NTRS)

Callantine, Todd J.

2011-01-01

Robust schedule-based arrival management requires efficient recovery from off-nominal situations. This paper presents research on modeling off-nominal situations and plans for recovering from them using TRAC, a route/airspace design, fast-time simulation, and analysis tool for studying NextGen trajectory-based operations. The paper provides an overview of a schedule-based arrival-management concept and supporting controller tools, then describes TRAC implementations of methods for constructing off-nominal scenarios, generating trajectory options to meet scheduling constraints, and automatically producing recovery plans.

Computational Design Tool for Bridge Hydrodynamic Loading in Inundated Flows of Midwest Rivers

DOT National Transportation Integrated Search

2009-12-01

The hydraulic forces experienced by an inundated bridge deck have great importance in the design of bridges. The proper estimation of loading exerted by the flow on the structure is important for design plans and is pertinent for evaluating its vulne...

An Automated Approach to Instructional Design Guidance.

ERIC Educational Resources Information Center

Spector, J. Michael; And Others

This paper describes the Guided Approach to Instructional Design Advising (GAIDA), an automated instructional design tool that incorporates techniques of artificial intelligence. GAIDA was developed by the U.S. Air Force Armstrong Laboratory to facilitate the planning and production of interactive courseware and computer-based training materials.…

OEXP Analysis Tools Workshop

NASA Technical Reports Server (NTRS)

Garrett, L. Bernard; Wright, Robert L.; Badi, Deborah; Findlay, John T.

1988-01-01

This publication summarizes the software needs and available analysis tools presented at the OEXP Analysis Tools Workshop held at the NASA Langley Research Center, Hampton, Virginia on June 21 to 22, 1988. The objective of the workshop was to identify available spacecraft system (and subsystem) analysis and engineering design tools, and mission planning and analysis software that could be used for various NASA Office of Exploration (code Z) studies, specifically lunar and Mars missions.

IP Sample Plan #4 | NCI Technology Transfer Center | TTC

Cancer.gov

Sample letter from Research Institutes and their principal investigator and consultants, describing a data and research tool sharing plan and procedures for sharing data, research materials, and patent and licensing of intellectual property. This letter is designed to be included as part of an application.

Development of a Traffic Management Decision Support Tool for Freeway Incident Traffic Management (FITM) Plan Deployment : Research Summary

DOT National Transportation Integrated Search

2017-12-01

In designing an effective traffic management plan for non-recurrent congestion, it is critical for responsible highway agencies to have some vital information, such as estimated incident duration, resulting traffic queues, and the expected delays. Ov...

A decision support tool for synchronizing technology advances with strategic mission objectives

NASA Technical Reports Server (NTRS)

Hornstein, Rhoda S.; Willoughby, John K.

1992-01-01

Successful accomplishment of the objectives of many long-range future missions in areas such as space systems, land-use planning, and natural resource management requires significant technology developments. This paper describes the development of a decision-support data-derived tool called MisTec for helping strategic planners to determine technology development alternatives and to synchronize the technology development schedules with the performance schedules of future long-term missions. Special attention is given to the operations, concept, design, and functional capabilities of the MisTec. The MisTec was initially designed for manned Mars mission, but can be adapted to support other high-technology long-range strategic planning situations, making it possible for a mission analyst, planner, or manager to describe a mission scenario, determine the technology alternatives for making the mission achievable, and to plan the R&D activity necessary to achieve the required technology advances.

Doing Academic Planning: Effective Tools for Decision Making.

ERIC Educational Resources Information Center

Nedwek, Brian P., Ed.

This sourcebook was designed to provide academic planners with the tools to perform core functions and activities that facilitate the transformation of higher education institutions from provider-centered cultures and organizations to learner-centered franchises. The readings examine partnerships and alliances needed for higher education to…

A Tool for the Administration and Management of University Profile Information

ERIC Educational Resources Information Center

Bulchand, Jacques; Rodriguez, Jorge; Chattah, Ana C.

2005-01-01

Purpose: The purpose of this paper is to present a management tool that helps to achieve the objectives of the plan for info-tech systems and communications of the University of Las Palmas de Gran Canaria for the 2003-2006 period. Design/methodology/approach: The methodology used in this case is nothing if not practical. The chosen tool involved…

A web-based 3D visualisation and assessment system for urban precinct scenario modelling

NASA Astrophysics Data System (ADS)

Trubka, Roman; Glackin, Stephen; Lade, Oliver; Pettit, Chris

2016-07-01

Recent years have seen an increasing number of spatial tools and technologies for enabling better decision-making in the urban environment. They have largely arisen because of the need for cities to be more efficiently planned to accommodate growing populations while mitigating urban sprawl, and also because of innovations in rendering data in 3D being well suited for visualising the urban built environment. In this paper we review a number of systems that are better known and more commonly used in the field of urban planning. We then introduce Envision Scenario Planner (ESP), a web-based 3D precinct geodesign, visualisation and assessment tool, developed using Agile and Co-design methods. We provide a comprehensive account of the tool, beginning with a discussion of its design and development process and concluding with an example use case and a discussion of the lessons learned in its development.

JPL Facilities and Software for Collaborative Design: 1994 - Present

NASA Technical Reports Server (NTRS)

DeFlorio, Paul A.

2004-01-01

The viewgraph presentation provides an overview of the history of the JPL Project Design Center (PDC) and, since 2000, the Center for Space Mission Architecture and Design (CSMAD). The discussion includes PDC objectives and scope; mission design metrics; distributed design; a software architecture timeline; facility design principles; optimized design for group work; CSMAD plan view, facility design, and infrastructure; and distributed collaboration tools.

Employing Earned Value Management in Government Research and Design - Lessons Learned from the Trenches

NASA Technical Reports Server (NTRS)

Simon, Tom

2009-01-01

To effectively manage a project, the project manager must have a plan, understand the current conditions, and be able to take action to correct the course when challenges arise. Research and design projects face technical, schedule, and budget challenges that make it difficult to utilize project management tools developed for projects based on previously demonstrated technologies. Projects developing new technologies by their inherent nature are trying something new and thus have little to no data to support estimates for schedule and cost, let alone the technical outcome. Projects with a vision for the outcome but little confidence in the exact tasks to accomplish in order to achieve the vision incur cost and schedule penalties when conceptual solutions require unexpected iterations or even a reinvention of the plan. This presentation will share the project management methodology and tools developed through trial and error for a NASA research and design project combining industry, academia, and NASA inhouse work in which Earned Value Management principles were employed but adapted for the reality of the government financial system and the reality of challenging technology development. The priorities of the presented methodology are flexibility, accountability, and simplicity to give the manager tools to help deliver to the customer while not using up valuable time and resources on extensive planning and analysis. This presentation will share the methodology, tools, and work through failed and successful examples from the three years of process evolution.

CQI: using the Hoshin planning system to design an orientation process.

PubMed

Platt, D; Laird, C

1995-01-01

The Hoshin planning system, developed in Japan after World War II, includes management tools intended specifically for planning new processes. There are seven tools, which can be used individually or in any combination: affinity diagrams, interrelationship digraphs, systematic diagrams, matrix diagrams, process decision program charts, arrow diagrams and prioritization matrices. The radiology department at Carson-Tahoe Hospital formed a CQI team to improve the training of front office clerks. The team quickly discovered that a new orientation program was needed and decided to use Hoshin tools to create one. Using the tools, the team identified and prioritized all relevant factors, described specific tasks needed to complete the planning process and how long each would take, anticipated problems, and assigned areas of responsibility to members of the team. Each time the team grew weary or discouraged, the clarity and organization afforded by the tools helped them feel productive and in control of the process. The team was amazed at the creative ideas they generated through this 3-month-long process. Not only did they develop and implement a new orientation program, they also cultivated a stronger sense of pride and confidence in their work and each other.

Cooperative optimization of reconfigurable machine tool configurations and production process plan

NASA Astrophysics Data System (ADS)

Xie, Nan; Li, Aiping; Xue, Wei

2012-09-01

The production process plan design and configurations of reconfigurable machine tool (RMT) interact with each other. Reasonable process plans with suitable configurations of RMT help to improve product quality and reduce production cost. Therefore, a cooperative strategy is needed to concurrently solve the above issue. In this paper, the cooperative optimization model for RMT configurations and production process plan is presented. Its objectives take into account both impacts of process and configuration. Moreover, a novel genetic algorithm is also developed to provide optimal or near-optimal solutions: firstly, its chromosome is redesigned which is composed of three parts, operations, process plan and configurations of RMTs, respectively; secondly, its new selection, crossover and mutation operators are also developed to deal with the process constraints from operation processes (OP) graph, otherwise these operators could generate illegal solutions violating the limits; eventually the optimal configurations for RMT under optimal process plan design can be obtained. At last, a manufacturing line case is applied which is composed of three RMTs. It is shown from the case that the optimal process plan and configurations of RMT are concurrently obtained, and the production cost decreases 6.28% and nonmonetary performance increases 22%. The proposed method can figure out both RMT configurations and production process, improve production capacity, functions and equipment utilization for RMT.

Bioassessment Tools for Stony Corals: Monitoring Approaches and Proposed Sampling Plan for the U.S. Virgin Islands

EPA Science Inventory

This document describes three general approaches to the design of a sampling plan for biological monitoring of coral reefs. Status assessment, trend detection and targeted monitoring each require a different approach to site selection and statistical analysis. For status assessm...

Appendix X. ComField Information Management System.

ERIC Educational Resources Information Center

Coffin, Robert W.

This appendix outlines the ComField information management system which is designed to give the project management a comprehensive tool for decisionmaking and to free instructors from tasks of keeping current records of every student's performance, help them plan their time more efficiently for counseling students and planning instruction, and…

Overview of Vertical Axis Wind Turbine (VAWT)

NASA Technical Reports Server (NTRS)

Sullivan, W. N.

1979-01-01

A survey is presented of the practices which were applied for designing VAWT blades. An attempt is made to discuss strengths and weaknesses of the existing procedures. Discussion is provided on planned or suggested future work in developing improved design tools.

A Preservation Program for the Colorado State University Libraries. The Final Report of the ARL/OMS Preservation Planning Program.

ERIC Educational Resources Information Center

Green, Stephen; And Others

This final report is a product of a Preservation Planning Program (PPP) self-study conducted by the Colorado State University Library (CSUL) working with the Association of Research Libraries' (ARL) Office of Management Studies (OMS). Designed to put self-help tools into the hands of library staff responsible for developing plans and procedures…

Science Base and Tools for Evaluating Stream Restoration Project Proposals.

NASA Astrophysics Data System (ADS)

Cluer, B.; Thorne, C.; Skidmore, P.; Castro, J.; Pess, G.; Beechie, T.; Shea, C.

2008-12-01

Stream restoration, stabilization, or enhancement projects typically employ site-specific designs and site- scale habitat improvement projects have become the default solution to many habitat problems and constraints. Such projects are often planned and implemented without thorough consideration of the broader scale problems that may be contributing to habitat degradation, attention to project resiliency to flood events, accounting for possible changes in climate or watershed land use, or ensuring the long term sustainability of the project. To address these issues, NOAA Fisheries and USFWS have collaboratively commissioned research to develop a science document and accompanying tools to support more consistent and comprehensive review of stream management and restoration projects proposals by Service staff responsible for permitting. The science document synthesizes the body of knowledge in fluvial geomorphology and presents it in a way that is accessible to the Services staff biologists, who are not trained experts in this field. Accompanying the science document are two electronic tools: a Project Information Checklist to assist in evaluating whether a proposal includes all the information necessary to allow critical and thorough project evaluation; and a Project Evaluation Tool (in flow chart format) that guides reviewers through the steps necessary to critically evaluate the quality of the information submitted, the goals and objectives of the project, project planning and development, project design, geomorphic-habitat-species relevance, and risks to listed species. Materials for training Services staff and others in the efficient use of the science document and tools have also been developed. The longer term goals of this effort include: enabling consistent and comprehensive reviews that are completed in a timely fashion by regulators; facilitating improved project planning and design by proponents; encouraging projects that are attuned to their watershed and geomorphic contexts; questioning perceived constraints on project design; reducing the use of hard structures and encouraging deformability; promoting designs that address both risk and uncertainty in applying engineering design standards; allowing for future climate and land use changes; and encouraging post-project monitoring, appraisal and project aftercare.

Developing a Web-Based Ppgis, as AN Environmental Reporting Service

NASA Astrophysics Data System (ADS)

Ranjbar Nooshery, N.; Taleai, M.; Kazemi, R.; Ebadi, K.

2017-09-01

Today municipalities are searching for new tools to empower locals for changing the future of their own areas by increasing their participation in different levels of urban planning. These tools should involve the community in planning process using participatory approaches instead of long traditional top-down planning models and help municipalities to obtain proper insight about major problems of urban neighborhoods from the residents' point of view. In this matter, public participation GIS (PPGIS) which enables citizens to record and following up their feeling and spatial knowledge regarding problems of the city in the form of maps have been introduced. In this research, a tool entitled CAER (Collecting & Analyzing of Environmental Reports) is developed. In the first step, a software framework based on Web-GIS tool, called EPGIS (Environmental Participatory GIS) has been designed to support public participation in reporting urban environmental problems and to facilitate data flow between citizens and municipality. A web-based cartography tool was employed for geo-visualization and dissemination of map-based reports. In the second step of CAER, a subsystem is developed based on SOLAP (Spatial On-Line Analytical Processing), as a data mining tools to elicit the local knowledge facilitating bottom-up urban planning practices and to help urban managers to find hidden relations among the recorded reports. This system is implemented in a case study area in Boston, Massachusetts and its usability was evaluated. The CAER should be considered as bottom-up planning tools to collect people's problems and views about their neighborhood and transmits them to the city officials. It also helps urban planners to find solutions for better management from citizen's viewpoint and gives them this chance to develop good plans to the neighborhoods that should be satisfied the citizens.

An empirical evaulation of computerized tools to aid in enroute flight planning

NASA Technical Reports Server (NTRS)

Smith, Philip J.; Mccoy, C. Elaine; Layton, Charles

1993-01-01

The paper describes an experiment using the Flight Planning Testbed (FPT) in which 27 airline dispatchers were studied. Five general questions was addresses in the study: Under what circumstances does the introduction of computer-generated suggestions (flight plans) influence the planning behavior of dispatchers; what is the nature of such influences; How beneficial are the general design concepts underlying FPT; How effective are the specific implementation decisions made in realizing these general design concepts; How effectively do dispatchers evaluate situations requiring replanning and how effectively do they identify appropriate solutions to these situations. The study leaves little doubt that the introduction of computer-generated suggestions for solving a flight planning problem can have a marked impact on the cognitive processes of the user and on the ultimate plan selected.

Investigating University Educators' Design Thinking and the Implications for Design Support Tools

ERIC Educational Resources Information Center

Bennett, Sue; Agostinho, Shirley; Lockyer, Lori

2016-01-01

All university educators perform design work as they prepare and plan learning experiences for their students. How such design work is undertaken, conceptualised, and optimally supported is the focus of ongoing research for the authors. The purpose of this article is to present the results of a research study that sought to gain a richer…

Potential Impacts of Accelerated Climate Change

DOE Office of Scientific and Technical Information (OSTI.GOV)

Leung, L. R.; Vail, L. W.

2016-05-31

This research project is part of the U.S. Nuclear Regulatory Commission’s (NRC’s) Probabilistic Flood Hazard Assessment (PFHA) Research plan in support of developing a risk-informed licensing framework for flood hazards and design standards at proposed new facilities and significance determination tools for evaluating potential deficiencies related to flood protection at operating facilities. The PFHA plan aims to build upon recent advances in deterministic, probabilistic, and statistical modeling of extreme precipitation events to develop regulatory tools and guidance for NRC staff with regard to PFHA for nuclear facilities. The tools and guidance developed under the PFHA plan will support and enhancemore » NRC’s capacity to perform thorough and efficient reviews of license applications and license amendment requests. They will also support risk-informed significance determination of inspection findings, unusual events, and other oversight activities.« less

A geometrically based method for automated radiosurgery planning.

PubMed

Wagner, T H; Yi, T; Meeks, S L; Bova, F J; Brechner, B L; Chen, Y; Buatti, J M; Friedman, W A; Foote, K D; Bouchet, L G

2000-12-01

A geometrically based method of multiple isocenter linear accelerator radiosurgery treatment planning optimization was developed, based on a target's solid shape. Our method uses an edge detection process to determine the optimal sphere packing arrangement with which to cover the planning target. The sphere packing arrangement is converted into a radiosurgery treatment plan by substituting the isocenter locations and collimator sizes for the spheres. This method is demonstrated on a set of 5 irregularly shaped phantom targets, as well as a set of 10 clinical example cases ranging from simple to very complex in planning difficulty. Using a prototype implementation of the method and standard dosimetric radiosurgery treatment planning tools, feasible treatment plans were developed for each target. The treatment plans generated for the phantom targets showed excellent dose conformity and acceptable dose homogeneity within the target volume. The algorithm was able to generate a radiosurgery plan conforming to the Radiation Therapy Oncology Group (RTOG) guidelines on radiosurgery for every clinical and phantom target examined. This automated planning method can serve as a valuable tool to assist treatment planners in rapidly and consistently designing conformal multiple isocenter radiosurgery treatment plans.

Resilient cities: meaning, models, and metaphor for integrating the ecological, socio-economic, and planning realms

Treesearch

S.T.A. Pickett; M.L. Cadenasso; J.M. Grove

2004-01-01

Urban designers, ecologists, and social scientists have called for closer links among their disciplines. We examine a promising new tool for promoting this linkage—the metaphor of "cities of resilience." To put this tool to best use, we indicate how metaphor fits with other conceptual tools in science. We then present the two opposing definitions of...

Preserving the Family Woods: tools to help guide transfer to the next generation of landowners

Treesearch

US FS Northeastern Area State and Private Forestry; John Becker; Michael Jacobson

2008-01-01

Hello, Woodland Owner! Looking forward to a nice conversation with your family about estate planning? If so, you're one of a fairly small number. Estate planning may not be a fun or easy topic, but this is an area where failing to plan can mean planning to fail. This guide is designed to help make the process a little easier. If it helps to know, you're not...

Beyond information access: Support for complex cognitive activities in public health informatics tools.

PubMed

Sedig, Kamran; Parsons, Paul; Dittmer, Mark; Ola, Oluwakemi

2012-01-01

Public health professionals work with a variety of information sources to carry out their everyday activities. In recent years, interactive computational tools have become deeply embedded in such activities. Unlike the early days of computational tool use, the potential of tools nowadays is not limited to simply providing access to information; rather, they can act as powerful mediators of human-information discourse, enabling rich interaction with public health information. If public health informatics tools are designed and used properly, they can facilitate, enhance, and support the performance of complex cognitive activities that are essential to public health informatics, such as problem solving, forecasting, sense-making, and planning. However, the effective design and evaluation of public health informatics tools requires an understanding of the cognitive and perceptual issues pertaining to how humans work and think with information to perform such activities. This paper draws on research that has examined some of the relevant issues, including interaction design, complex cognition, and visual representations, to offer some human-centered design and evaluation considerations for public health informatics tools.

Malicious Activity Simulation Tool (MAST) and Trust

DTIC Science & Technology

2015-06-01

application through discovery and remediation of flaws. B. DESIGN AND DEVELOPMENT CONSIDERATIONS Design and development focuses on the actual...protection of the backup and restoration of the application. COBR -1 X V-16846 The IAO will ensure a disaster recovery plan exists in accordance

Efficient System Design and Sustainable Finance for China's Village Electrification Program: Preprint

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ma, S.; Yin, H.; Kline, D. M.

2006-08-01

This paper describes a joint effort of the Institute for Electrical Engineering of the Chinese Academy of Sciences (IEE), and the U.S. National Renewable Energy Laboratory (NREL) to support China's rural electrification program. This project developed a design tool that provides guidelines both for off-grid renewable energy system designs and for cost-based tariff and finance schemes to support them. This tool was developed to capitalize on lessons learned from the Township Electrification Program that preceded the Village Electrification Program. We describe the methods used to develop the analysis, some indicative results, and the planned use of the tool in themore » Village Electrification Program.« less

Ergonomic risk assessment with DesignCheck to evaluate assembly work in different phases of the vehicle development process.

PubMed

Winter, Gabriele; Schaub, Karlheinz G; Großmann, Kay; Laun, Gerhard; Landau, Kurt; Bruder, Ralph

2012-01-01

Occupational hazards exist, if the design of the work situation is not in accordance with ergonomic design principles. At assembly lines ergonomics is applied to the design of work equipment and tasks and to work organisation. The ignoring of ergonomic principles in planning and design of assembly work leads to unfavourable working posture, action force and material handling. Disorders of the musculoskeletal system are of a common occurrence throughout Europe. Musculoskeletal disorders are a challenge against the background of disabled workers. The changes in a worker's capability have to be regarded in the conception of redesigned and new assembly lines. In this way ergonomics becomes progressively more important in planning and design of vehicles: The objective of ergonomic design in different stages of the vehicles development process is to achieve an optimal adaptation of the assembly work to workers. Hence the ergonomic screening tool "Design Check" (DC) was developed to identify ergonomic deficits in workplace layouts. The screening-tool is based on the current ergonomic state of the art in the design of physical work and relevant EU legal requirements. It was tested within a federal German research project at selected work stations at the assembly lines at Dr.-Ing. h.c. F. Porsche AG / Stuttgart. Meanwhile the application of the screening-tool DC is transferred in other parts of the Porsche AG, Stuttgart. It is also realized as an ergonomic standard method to perform assembly work in different phases of the vehicle development process.

Knowledge-based commodity distribution planning

NASA Technical Reports Server (NTRS)

Saks, Victor; Johnson, Ivan

1994-01-01

This paper presents an overview of a Decision Support System (DSS) that incorporates Knowledge-Based (KB) and commercial off the shelf (COTS) technology components. The Knowledge-Based Logistics Planning Shell (KBLPS) is a state-of-the-art DSS with an interactive map-oriented graphics user interface and powerful underlying planning algorithms. KBLPS was designed and implemented to support skilled Army logisticians to prepare and evaluate logistics plans rapidly, in order to support corps-level battle scenarios. KBLPS represents a substantial advance in graphical interactive planning tools, with the inclusion of intelligent planning algorithms that provide a powerful adjunct to the planning skills of commodity distribution planners.

Manufacturing engineering: Principles for optimization

NASA Astrophysics Data System (ADS)

Koenig, Daniel T.

Various subjects in the area of manufacturing engineering are addressed. The topics considered include: manufacturing engineering organization concepts and management techniques, factory capacity and loading techniques, capital equipment programs, machine tool and equipment selection and implementation, producibility engineering, methods, planning and work management, and process control engineering in job shops. Also discussed are: maintenance engineering, numerical control of machine tools, fundamentals of computer-aided design/computer-aided manufacture, computer-aided process planning and data collection, group technology basis for plant layout, environmental control and safety, and the Integrated Productivity Improvement Program.

Inspection planning development: An evolutionary approach using reliability engineering as a tool

NASA Technical Reports Server (NTRS)

Graf, David A.; Huang, Zhaofeng

1994-01-01

This paper proposes an evolutionary approach for inspection planning which introduces various reliability engineering tools into the process and assess system trade-offs among reliability, engineering requirement, manufacturing capability and inspection cost to establish an optimal inspection plan. The examples presented in the paper illustrate some advantages and benefits of the new approach. Through the analysis, reliability and engineering impacts due to manufacturing process capability and inspection uncertainty are clearly understood; the most cost effective and efficient inspection plan can be established and associated risks are well controlled; some inspection reductions and relaxations are well justified; and design feedbacks and changes may be initiated from the analysis conclusion to further enhance reliability and reduce cost. The approach is particularly promising as global competitions and customer quality improvement expectations are rapidly increasing.

Family Planning Services Available to Migratory Farm Workers in the Mid-Continent Streams.

ERIC Educational Resources Information Center

Planned Parenthood--World Population, Austin, TX. Southwest Region.

The information in this directory is designed to promote continuity in family planning services for migrant families in mid-continent streams. It provides professional personnel with a new tool to help meet the distinctive needs of individual migrants. Names, addresses, schedules, methods, and fee information of service agencies (health…

An Introduction to the Transition to Work Simulator.

ERIC Educational Resources Information Center

Conroy, William G., Jr.

The transition to work simulator (TWS) was developed as a policy tool for education and manpower planning. It was designed in anticipation of the Education Amendments of 1976 and the Youth Employment and Demonstration Projects Act of 1977 to facilitate comprehensive planning. TWS is a computerized simulation model of the stream of important…

Preservation Planning Project Study Team. Final Report.

ERIC Educational Resources Information Center

Pittsburgh Univ., PA. Libraries.

This final report is a product of a comprehensive 14-month Preservation Planning Program (PPP) self-study conducted by the University of Pittsburgh Libraries, working with the Association of Research Libraries' (ARL) Office of Management Studies. The PPP is designed to put self-help tools into the hands of library staff responsible for developing…

Planning in Reverse: A Viable Approach to Organizational Leadership

ERIC Educational Resources Information Center

Ballantyne, Scott; Berret, Beth; Wells, Mary Ellen

2011-01-01

Planning in Reverse is an innovative concept designed to make organizations more successful by altering the perspective utilized in the strategy process. What is needed for organizations to thrive in this new environment of change and uncertainty is a short-term approach for long-term viability. In this book, tools and concepts regarding Planning…

Succeeding with Struggling Students: A Planning Resource for Raising Achievement

ERIC Educational Resources Information Center

Richardson, Marti T.

2006-01-01

Schools today are working harder than ever to help ensure that "all" children "can" learn and achieve high standards. Marti Richardson, a recognized leader in professional and curriculum development, delivers an innovative, classroom-tested program with planning tools to customize it for any school or district's data-based needs. Designed around a…

A Computer Simulation Modeling Tool to Assist Colleges in Long-Range Planning. Final Report.

ERIC Educational Resources Information Center

Salmon, Richard; And Others

Long-range planning involves the establishment of educational objectives within a rational philosophy, the design of activities and programs to meet stated objectives, the organization and allocation of resources to implement programs, and the analysis of results in terms of the objectives. Current trends of educational growth and complexity…

Innovative applications of artificial intelligence

NASA Astrophysics Data System (ADS)

Schorr, Herbert; Rappaport, Alain

Papers concerning applications of artificial intelligence are presented, covering applications in aerospace technology, banking and finance, biotechnology, emergency services, law, media planning, music, the military, operations management, personnel management, retail packaging, and manufacturing assembly and design. Specific topics include Space Shuttle telemetry monitoring, an intelligent training system for Space Shuttle flight controllers, an expert system for the diagnostics of manufacturing equipment, a logistics management system, a cooling systems design assistant, and a knowledge-based integrated circuit design critic. Additional topics include a hydraulic circuit design assistant, the use of a connector assembly specification expert system to harness detailed assembly process knowledge, a mixed initiative approach to airlift planning, naval battle management decision aids, an inventory simulation tool, a peptide synthesis expert system, and a system for planning the discharging and loading of container ships.

The comparative risk assessment framework and tools (CRAFT)

Treesearch

Southern Research Station USDA Forest Service

2010-01-01

To help address these challenges, the USDA Forest Service’s Eastern Forest Environmental Threat Assessment Center (EFETAC) and the University of North Carolina Asheville’s National Environmental Modeling and Analysis Center (NEMAC) designed a planning framework, called the Comparative Risk Assessment Framework and Tools (CRAFT). CRAFT is...

Tool time: melding watershed and site goals on private lands

Treesearch

Gary Bentrup; Michele Schoeneberger; Mike Dosskey; Gary Wells; Todd Kellerman

2005-01-01

Creating effective agroforestry systems with broad public support requires simultaneously addressing landowner and societal goals while paying respect to ecological processes that cross spatial and political boundaries. To meet this challenge, a variety of planning and design tools are needed that are straight-forward and flexible enough to accommodate the range of...

An Overview of the State of Environmental Assessment Education at Canadian Universities

ERIC Educational Resources Information Center

Stelmack, Colleen M.; Sinclair, John A.; Fitzpatrick, Patricia

2005-01-01

Purpose--Environmental assessment (EA) is a proactive planning tool designed to consider the ecological, cultural, socio-political and economic impacts of potential projects, making it a major tool for achieving sustainable development. Meaningful EA requires a bridging of the natural sciences with the social sciences to broaden understanding of…

Web Database Development: Implications for Academic Publishing.

ERIC Educational Resources Information Center

Fernekes, Bob

This paper discusses the preliminary planning, design, and development of a pilot project to create an Internet accessible database and search tool for locating and distributing company data and scholarly work. Team members established four project objectives: (1) to develop a Web accessible database and decision tool that creates Web pages on the…

Three Approaches for Developing Training Materials and Curriculum Policies.

ERIC Educational Resources Information Center

Doxey, Isabel

Agencies funding early childhood education projects, policy analysts, and research consumers have created a demand for research tools generating data with applied reliability. This paper examines the focus group as a social science research tool which meets this demand. Part 1 defines a focus group as a carefully planned discussion designed to…

The French eco-neighbourhood evaluation model: Contributions to sustainable city making and to the evolution of urban practices.

PubMed

Chastenet, Cédissia About-de; Belziti, Daniela; Bessis, Bruno; Faucheux, Franck; Le Sceller, Thibaut; Monaco, François-Xavier; Pech, Pierre

2016-07-01

In this article we discuss whether the French eco-neighbourhood policy tool may be considered as an original experimentation in sustainable urban planning. From scientific literature across a number of countries and especially in European context, we present what kind of policies may achieve eco-neighbourhoods. Then we present what the French framework is, and what tools to promote and elaborate eco-neighbourhoods there are in France. Thirdly, in fact, both French policies, national and local, concerning eco-neighbourhood projects, seem to integrate means of assessing urban projects and this assessment achieves a kind of certification. While the Ministry in charge of Urban Planning has developed the national EcoQuartier ("EcoNeighbourhood" in English) certification, the City of Paris and other local authorities have designed similar tools, which integrate a large number of parameters dealing with urban sustainability and which are designed to evolve over time. Finally, we discuss whether the French tool is really original and whether it prefigures new practices in the field of sustainable urban development. Copyright © 2016 Elsevier Ltd. All rights reserved.

Global Snow from Space: Development of a Satellite-based, Terrestrial Snow Mission Planning Tool

NASA Astrophysics Data System (ADS)

Forman, B. A.; Kumar, S.; LeMoigne, J.; Nag, S.

2017-12-01

A global, satellite-based, terrestrial snow mission planning tool is proposed to help inform experimental mission design with relevance to snow depth and snow water equivalent (SWE). The idea leverages the capabilities of NASA's Land Information System (LIS) and the Tradespace Analysis Tool for Constellations (TAT-C) to harness the information content of Earth science mission data across a suite of hypothetical sensor designs, orbital configurations, data assimilation algorithms, and optimization and uncertainty techniques, including cost estimates and risk assessments of each hypothetical permutation. One objective of the proposed observing system simulation experiment (OSSE) is to assess the complementary - or perhaps contradictory - information content derived from the simultaneous collection of passive microwave (radiometer), active microwave (radar), and LIDAR observations from space-based platforms. The integrated system will enable a true end-to-end OSSE that can help quantify the value of observations based on their utility towards both scientific research and applications as well as to better guide future mission design. Science and mission planning questions addressed as part of this concept include: What observational records are needed (in space and time) to maximize terrestrial snow experimental utility? How might observations be coordinated (in space and time) to maximize this utility? What is the additional utility associated with an additional observation? How can future mission costs be minimized while ensuring Science requirements are fulfilled?

Towards the Development of a Global, Satellite-based, Terrestrial Snow Mission Planning Tool

NASA Technical Reports Server (NTRS)

Forman, Bart; Kumar, Sujay; Le Moigne, Jacqueline; Nag, Sreeja

2017-01-01

A global, satellite-based, terrestrial snow mission planning tool is proposed to help inform experimental mission design with relevance to snow depth and snow water equivalent (SWE). The idea leverages the capabilities of NASAs Land Information System (LIS) and the Tradespace Analysis Tool for Constellations (TAT C) to harness the information content of Earth science mission data across a suite of hypothetical sensor designs, orbital configurations, data assimilation algorithms, and optimization and uncertainty techniques, including cost estimates and risk assessments of each hypothetical orbital configuration.One objective the proposed observing system simulation experiment (OSSE) is to assess the complementary or perhaps contradictory information content derived from the simultaneous collection of passive microwave (radiometer), active microwave (radar), and LIDAR observations from space-based platforms. The integrated system will enable a true end-to-end OSSE that can help quantify the value of observations based on their utility towards both scientific research and applications as well as to better guide future mission design. Science and mission planning questions addressed as part of this concept include:1. What observational records are needed (in space and time) to maximize terrestrial snow experimental utility?2. How might observations be coordinated (in space and time) to maximize utility? 3. What is the additional utility associated with an additional observation?4. How can future mission costs being minimized while ensuring Science requirements are fulfilled?

Towards the Development of a Global, Satellite-Based, Terrestrial Snow Mission Planning Tool

NASA Technical Reports Server (NTRS)

Forman, Bart; Kumar, Sujay; Le Moigne, Jacqueline; Nag, Sreeja

2017-01-01

A global, satellite-based, terrestrial snow mission planning tool is proposed to help inform experimental mission design with relevance to snow depth and snow water equivalent (SWE). The idea leverages the capabilities of NASA's Land Information System (LIS) and the Tradespace Analysis Tool for Constellations (TAT-C) to harness the information content of Earth science mission data across a suite of hypothetical sensor designs, orbital configurations, data assimilation algorithms, and optimization and uncertainty techniques, including cost estimates and risk assessments of each hypothetical permutation. One objective of the proposed observing system simulation experiment (OSSE) is to assess the complementary or perhaps contradictory information content derived from the simultaneous collection of passive microwave (radiometer), active microwave (radar), and LIDAR observations from space-based platforms. The integrated system will enable a true end-to-end OSSE that can help quantify the value of observations based on their utility towards both scientific research and applications as well as to better guide future mission design. Science and mission planning questions addressed as part of this concept include: What observational records are needed (in space and time) to maximize terrestrial snow experimental utility? How might observations be coordinated (in space and time) to maximize this utility? What is the additional utility associated with an additional observation? How can future mission costs be minimized while ensuring Science requirements are fulfilled?

Mainstreaming Climate Change: Recent and Ongoing Efforts to Understand, Improve, and Expand Consideration of Climate Change in Federal Water Resources Planning

NASA Astrophysics Data System (ADS)

Ferguson, I. M.; McGuire, M.; Broman, D.; Gangopadhyay, S.

2017-12-01

The Bureau of Reclamation is a Federal agency tasked with developing and managing water supply and hydropower projects in the Western U.S. Climate and hydrologic variability and change significantly impact management actions and outcomes across Reclamation's programs and initiatives, including water resource planning and operations, infrastructure design and maintenance, hydropower generation, and ecosystem restoration, among others. Planning, design, and implementation of these programs therefore requires consideration of future climate and hydrologic conditions will impact program objectives. Over the past decade, Reclamation and other Federal agencies have adopted new guidelines, directives, and mandates that require consideration of climate change in water resources planning and decision making. Meanwhile, the scientific community has developed a large number of climate projections, along with an array of models, methods, and tools to facilitate consideration of climate projections in planning and decision making. However, water resources engineers, planners, and decision makers continue to face challenges regarding how best to use the available data and tools to support major decisions, including decisions regarding infrastructure investments and long-term operating criteria. This presentation will discuss recent and ongoing research towards understanding, improving, and expanding consideration of climate projections and related uncertainties in Federal water resources planning and decision making. These research efforts address a variety of challenges, including: How to choose between available climate projection datasets and related methods, models, and tools—many of which are considered experimental or research tools? How to select an appropriate decision framework when design or operating alternatives may differ between climate scenarios? How to effectively communicate results of a climate impacts analysis to decision makers? And, how to improve robustness and resilience of water resources systems in the face of significant uncertainty? Discussion will focus on the intersection between technical challenges and decision making paradigms and the need for improved scientist-decision maker engagement through the lens of this Federal water management agency.

Communicating Navigation Data Inside the Cassini-Huygens Project: Visualizations and Tools

NASA Technical Reports Server (NTRS)

Wagner, Sean V.; Gist, Emily M.; Goodson, Troy D.; Hahn, Yungsun; Stumpf, Paul W.; Williams, Powtawche N.

2008-01-01

The Cassini-Huygens Saturn tour poses an interesting navigation challenge. From July 2004 through June 2008, the Cassini orbiter performed 112 of 161 planned maneuvers. This demanding schedule, where maneuvers are often separated by just a few days, motivated the development of maneuver design/analysis automation software tools. Besides generating maneuver designs and presentations, these tools are the mechanism to producing other types of navigation information; information used to facilitate operational decisions on such issues as maneuver cancellation and alternate maneuver strategies. This paper will discuss the navigation data that are communicated inside the Cassini-Huygens Project, as well as the maneuver software tools behind the processing of the data.

Dissemination of a Web-Based Tool for Supporting Health Insurance Plan Decisions (Show Me Health Plans): Cross-Sectional Observational Study.

PubMed

Zhao, Jingsong; Mir, Nageen; Ackermann, Nicole; Kaphingst, Kimberly A; Politi, Mary C

2018-06-20

The rate of uninsured people has decreased dramatically since the Affordable Care Act was passed. To make an informed decision, consumers need assistance to understand the advantages and disadvantages of health insurance plans. The Show Me Health Plans Web-based decision support tool was developed to improve the quality of health insurance selection. In response to the promising effectiveness of Show Me Health Plans in a randomized controlled trial (RCT) and the growing need for Web-based health insurance decision support, the study team used expert recommendations for dissemination and implementation, engaged external stakeholders, and made the Show Me Health Plans tool available to the public. The purpose of this study was to implement the public dissemination of the Show Me Health Plans tool in the state of Missouri and to evaluate its impact compared to the RCT. This study used a cross-sectional observational design. Dissemination phase users were compared with users in the RCT study across the same outcome measures. Time spent using the Show Me Health Plans tool, knowledge, importance rating of 9 health insurance features, and intended plan choice match with algorithm predictions were examined. During the dissemination phase (November 2016 to January 2017), 10,180 individuals visited the SMHP website, and the 1069 users who stayed on the tool for more than one second were included in our analyses. Dissemination phase users were more likely to live outside St. Louis City or County (P<.001), were less likely to be below the federal poverty level (P<.001), and had a higher income (P=.03). Overall, Show Me Health Plans users from St. Louis City or County spent more time on the Show Me Health Plans tool than those from other Missouri counties (P=.04); this association was not observed in the RCT. Total time spent on the tool was not correlated with knowledge scores, which were associated with lower poverty levels (P=.009). The users from the RCT phase were more likely to select an insurance plan that matched the tool's recommendations (P<.001) compared with the dissemination phase users. The study suggests that a higher income population may be more likely to seek information and online help when making a health insurance plan decision. We found that Show Me Health Plans users in the dissemination phase were more selective in the information they reviewed. This study illustrates one way of disseminating and implementing an empirically tested Web-based decision aid tool. Distributing Web-based tools is feasible and may attract a large number of potential users, educate them on basic health insurance information, and make recommendations based on personal information and preference. However, using Web-based tools may differ according to the demographics of the general public compared to research study participants. ©Jingsong Zhao, Nageen Mir, Nicole Ackermann, Kimberly A Kaphingst, Mary C Politi. Originally published in the Journal of Medical Internet Research (http://www.jmir.org), 20.06.2018.

A patient self-assessment tool for cardiac rehabilitation.

PubMed

Phelan, C; Finnell, M D; Mottla, K A

1989-01-01

A patient self-assessment tool was designed, tested, and implemented to promote cardiac-specific data collection, based on Gordon's Functional Health Patterns, to maximize patient/family involvement in determining a plan of care, and to streamline primary nurses' documentation requirements. Retrospective and concurrent chart reviews provided data for quality assurance monitoring. The results of the monitoring demonstrated that the self-assessment tool markedly improved the patient-specific data base.

Enroute flight planning: Evaluating design concepts for the development of cooperative problem-solving systems

NASA Technical Reports Server (NTRS)

Smith, Philip J.

1995-01-01

There are many problem-solving tasks that are too complex to fully automate given the current state of technology. Nevertheless, significant improvements in overall system performance could result from the introduction of well-designed computer aids. We have been studying the development of cognitive tools for one such problem-solving task, enroute flight path planning for commercial airlines. Our goal has been two-fold. First, we have been developing specific system designs to help with this important practical problem. Second, we have been using this context to explore general design concepts to guide in the development of cooperative problem-solving systems. These design concepts are described below, along with illustrations of their application.

Plastic Surgery Applications Using Three-Dimensional Planning and Computer-Assisted Design and Manufacturing.

PubMed

Pfaff, Miles J; Steinbacher, Derek M

2016-03-01

Three-dimensional analysis and planning is a powerful tool in plastic and reconstructive surgery, enabling improved diagnosis, patient education and communication, and intraoperative transfer to achieve the best possible results. Three-dimensional planning can increase efficiency and accuracy, and entails five core components: (1) analysis, (2) planning, (3) virtual surgery, (4) three-dimensional printing, and (5) comparison of planned to actual results. The purpose of this article is to provide an overview of three-dimensional virtual planning and to provide a framework for applying these systems to clinical practice. Therapeutic, V.

The development of internet based ship design support system for small and medium sized shipyards

NASA Astrophysics Data System (ADS)

Shin, Sung-Chul; Lee, Soon-Sup; Kang, Dong-Hoon; Lee, Kyung-Ho

2012-03-01

In this paper, a prototype of ship basic planning system is implemented for the small and medium sized shipyards based on the internet technology and concurrent engineering concept. The system is designed from the user requirements. Consequently, standardized development environment and tools are selected. These tools are used for the system development to define and evaluate core application technologies. The system will contribute to increasing competitiveness of small and medium sized shipyards in the 21st century industrial en-vironment.

2015 Army Science Planning and Strategy Meeting Series: Outcomes and Conclusions

DTIC Science & Technology

2017-12-21

modeling and nanoscale characterization tools to enable efficient design of hybridized manufacturing ; realtime, multiscale computational capability...to enable predictive analytics for expeditionary on-demand manufacturing • Discovery of design principles to enable programming advanced genetic...goals, significant research is needed to mature the fundamental materials science, processing and manufacturing sciences, design methodologies, data

Curriculum Guide for Art in the Secondary Schools.

ERIC Educational Resources Information Center

Chicago Board of Education, IL.

This secondary school curriculum guide is written in outline form to simplify the planning of a design-oriented art program. For each of 15 design units, a step-by-step set of instructions is given. Each unit is presented in three stages, each of which is a complete lesson in design. Materials and tools necessary for lesson preparation, motivation…

High School Students' Compositions of Ranch Designs: Implications for Academic and Personal Achievement

ERIC Educational Resources Information Center

Smagorinsky, Peter; Pettis, Victoria; Reed, Patty

2004-01-01

This research analyzed the composing processes of two high school students designing horse ranch plans for a course in equine management and production. The investigation focused on understanding the problems driving the design process, the tools through which the students inscribed and encoded meaning in their compositions, and the integration,…

A Maturity Model: Does It Provide a Path for Online Course Design?

ERIC Educational Resources Information Center

Neuhauser, Charlotte

2004-01-01

Maturity models are successfully used by organizations attempting to improve their processes, products, and delivery. As more faculty include online course design and teaching, a maturity model of online course design may serve as a tool in planning and assessing their courses for improvement based on best practices. This article presents such a…

A Planning Tool for Incorporating Backward Design, Active Learning, and Authentic Assessment in the College Classroom

ERIC Educational Resources Information Center

Reynolds, Heather L.; Kearns, Katherine Dowell

2017-01-01

Backward course design is a compelling strategy for achieving results-based, student-centered learning. The backward course-design approach is first to identify student-learning outcomes, then the means of assessing the outcomes, and lastly the classroom activities that would support the learning outcomes. With demonstrated success at improving…

Ares First Stage "Systemology" - Combining Advanced Systems Engineering and Planning Tools to Assure Mission Success

NASA Technical Reports Server (NTRS)

Seiler, James; Brasfield, Fred; Cannon, Scott

2008-01-01

Ares is an integral part of NASA s Constellation architecture that will provide crew and cargo access to the International Space Station as well as low earth orbit support for lunar missions. Ares replaces the Space Shuttle in the post 2010 time frame. Ares I is an in-line, two-stage rocket topped by the Orion Crew Exploration Vehicle, its service module, and a launch abort system. The Ares I first stage is a single, five-segment reusable solid rocket booster derived from the Space Shuttle Program's reusable solid rocket motor. The Ares second or upper stage is propelled by a J-2X main engine fueled with liquid oxygen and liquid hydrogen. This paper describes the advanced systems engineering and planning tools being utilized for the design, test, and qualification of the Ares I first stage element. Included are descriptions of the current first stage design, the milestone schedule requirements, and the marriage of systems engineering, detailed planning efforts, and roadmapping employed to achieve these goals.

Analysis of post-mining excavations as places for municipal waste

NASA Astrophysics Data System (ADS)

Górniak-Zimroz, Justyna

2018-01-01

Waste management planning is an interdisciplinary task covering a wide range of issues including costs, legal requirements, spatial planning, environmental protection, geography, demographics, and techniques used in collecting, transporting, processing and disposing of waste. Designing and analyzing this issue is difficult and requires the use of advanced analysis methods and tools available in GIS geographic information systems containing readily available graphical and descriptive databases, data analysis tools providing expert decision support while selecting the best-designed alternative, and simulation models that allow the user to simulate many variants of waste management together with graphical visualization of the results of performed analyzes. As part of the research study, there have been works undertaken concerning the use of multi-criteria data analysis in waste management in areas located in southwestern Poland. These works have proposed the inclusion in waste management of post-mining excavations as places for the final or temporary collection of waste assessed in terms of their suitability with the tools available in GIS systems.

Stickybear's Math Splash: Adventures in Math Fun for Ages 5-10! School Version with Lesson Plans. [CD-ROM].

ERIC Educational Resources Information Center

Highsmith, Joni Bitman

Stickybear's Math Splash is a CD-ROM-based software tool for teaching mathematics skills beyond simple number recognition to elementary students. The accompanying printed lesson plans are designed to complement mathematics skills with other methods and areas of emphasis including kinesthetic learning, listening skills, decision making skills, and…

Planning the National Agricultural Library's Multimedia CD-ROM "Ornamental Horticulture."

ERIC Educational Resources Information Center

Mason, Pamela R.

1991-01-01

Discussion of issues involved in planning a multimedia CD-ROM product explains the selection of authoring tools, the design of a user interface, expert systems, text conversion and capture (including scanning and optical character recognition), and problems associated with image files. The use of audio is also discussed, and a 14-item glossary is…

Preservation at Stony Brook. Preservation Planning Program. Study Report.

ERIC Educational Resources Information Center

Cook, Donald C.; And Others

This final report is a product of a Preservation Planning Program (PPP) self-study conducted by the State University of New York (SUNY), Stony Brook, working with the Association of Research Libraries' (ARL) Office of Management Studies (OMS). The PPP is designed to put self-help tools into the hands of library staff responsible for developing…

Evaluation of Crew-Centric Onboard Mission Operations Planning and Execution Tool: Year 2

NASA Technical Reports Server (NTRS)

Hillenius, S.; Marquez, J.; Korth, D.; Rosenbaum, M.; Deliz, Ivy; Kanefsky, Bob; Zheng, Jimin

2018-01-01

Currently, mission planning for the International Space Station (ISS) is largely affected by ground operators in mission control. The task of creating a week-long mission plan for ISS crew takes dozens of people multiple days to complete, and is often created far in advance of its execution. As such, re-planning or adapting to changing real-time constraints or emergent issues is similarly taxing. As we design for future mission operations concepts to other planets or areas with limited connectivity to Earth, more of these ground-based tasks will need to be handled autonomously by the crew onboard.There is a need for a highly usable (including low training time) tool that enables efficient self-scheduling and execution within a single package. The ISS Program has identified Playbook as a potential option. It already has high crew acceptance as a plan viewer from previous analogs and can now support a crew self-scheduling assessment on ISS or on another mission. The goals of this work, a collaboration between the Human Research Program and the ISS Program, are to inform the design of systems for more autonomous crew operations and provide a platform for research on crew autonomy for future deep space missions. Our second year of the research effort have included new insights on the crew self-scheduling sessions performed by the crew through use on the HERA (Human Exploration Research Analog) and NEEMO (NASA Extreme Environment Mission Operations) analogs. Use on the NEEMO analog involved two self-scheduling strategies where the crew planned and executed two days of EVAs (Extra-Vehicular Activities). On HERA year two represented the first HERA campaign where we were able to perform research tasks. This involved selected flexible activities that the crew could schedule, mock timelines where the crew completed more complex planning exercises, usability evaluation of the crew self-scheduling features, and more insights into the limit of plan complexity that the crew could effectively self-schedule. In parallel we have added in new features and functionality in the Playbook tool based off of our insights from crew self-scheduling in the NASA analogs. In particular this year we have added in the ability for the crew to add, edit, and remove their own activities in the Playbook tool, expanding the type of planning and re-planning possible in the tool and opening up the ability for more free form plan creation. The ability to group and manipulate groups of activities from the plan task list was also added, allowing crew members to add predefined sets of activities onto their mission timeline. In addition we also added a way for crew members to roll back changes in their plan, in order to allow an undo like capability. These features expand and complement the initial self-scheduling features added in year one with the goal of making crew autonomous planning more efficient. As part of this work we have also finished developing the first version of our Playbook Data Analysis Tool, a research tool built to interpret and analyze the unobtrusively collected data obtained during the NASA analog missions through Playbook. This data which includes user click interaction as well as plan change information, through the Playbook Data Analysis Tool, allows us to playback this information as if a video camera was mounted over the crewmember's tablet. While the primary purpose of this tool is to allow usability analysis of crew self-scheduling sessions used on the NASA analog, since the data collected is structured, the tool can automatically derive metrics that would be traditionally tedious to achieve without manual analysis of video playback. We will demonstrate and discuss the ability for future derived metrics to be added to the tool. In addition to the current data and results gathered in year two we will also discuss the preparation and goals of our International Space Station (ISS) onboard technology demonstration with Playbook. This technology demonstration will be preformed as part of the CAST payload starting in late 2016.

Principal component analysis as a tool for library design: a case study investigating natural products, brand-name drugs, natural product-like libraries, and drug-like libraries.

PubMed

Wenderski, Todd A; Stratton, Christopher F; Bauer, Renato A; Kopp, Felix; Tan, Derek S

2015-01-01

Principal component analysis (PCA) is a useful tool in the design and planning of chemical libraries. PCA can be used to reveal differences in structural and physicochemical parameters between various classes of compounds by displaying them in a convenient graphical format. Herein, we demonstrate the use of PCA to gain insight into structural features that differentiate natural products, synthetic drugs, natural product-like libraries, and drug-like libraries, and show how the results can be used to guide library design.

Principal Component Analysis as a Tool for Library Design: A Case Study Investigating Natural Products, Brand-Name Drugs, Natural Product-Like Libraries, and Drug-Like Libraries

PubMed Central

Wenderski, Todd A.; Stratton, Christopher F.; Bauer, Renato A.; Kopp, Felix; Tan, Derek S.

2015-01-01

Principal component analysis (PCA) is a useful tool in the design and planning of chemical libraries. PCA can be used to reveal differences in structural and physicochemical parameters between various classes of compounds by displaying them in a convenient graphical format. Herein, we demonstrate the use of PCA to gain insight into structural features that differentiate natural products, synthetic drugs, natural product-like libraries, and drug-like libraries, and show how the results can be used to guide library design. PMID:25618349

Development and First Phase Evaluation of a Maternity Leave Educational Tool for Pregnant, Working Women in California.

PubMed

Kurtovich, Elaine; Guendelman, Sylvia; Neuhauser, Linda; Edelman, Dana; Georges, Maura; Mason-Marti, Peyton

2015-01-01

Despite the provision of maternity leave offered to mothers, many American women fail to take leave. We developed an evidence-based maternity leave educational tool for working women in California using participatory design. We tested its short-term efficacy with a randomized controlled trial of pregnant English-speakers (n=155). Among intervention participants exposed to the tool, 65% reported that they learned something new; 38% were motivated to seek more information; and 49% said it helped them plan their maternity leave. Among participants who delivered at ≥ 37 weeks gestation and said the tool helped them plan their leave, 89% took more than one week of prenatal leave, a significantly higher proportion than among controls who did not receive the tool (64%, p=0.049). Other findings favored trial participants, but were not statistically significant in this small sample. More intervention participants took some prenatal leave (80%) vs. controls (74%, p=0.44). Among participants who had returned to work when surveyed (n=50), mean postnatal leave uptake was on average 1 week longer for intervention participants vs. controls (13.3 vs. 12.2 weeks, p=0.54). The first-phase evaluation of this tool shows that it successfully informed women about maternity leave options, clarified complex regulations, encouraged women to seek further information and helped plan maternity leave. Compared to controls, trial participants who used the tool to plan their leave were far more likely to take prenatal leave close to term. Future evaluation of the tool when mediated by a health provider or employer is warranted.

The Technical Work Plan Tracking Tool

NASA Technical Reports Server (NTRS)

Chullen, Cinda; Leighton, Adele; Weller, Richard A.; Woodfill, Jared; Parkman, William E.; Ellis, Glenn L.; Wilson, Marilyn M.

2003-01-01

The Technical Work Plan Tracking Tool is a web-based application that enables interactive communication and approval of contract requirements that pertain to the administration of the Science, Engineering, Analysis, and Test (SEAT) contract at Johnson Space Center. The implementation of the application has (1) shortened the Technical Work Plan approval process, (2) facilitated writing and documenting requirements in a performance-based environment with associated surveillance plans, (3) simplified the contractor s estimate of the cost for the required work, and (4) allowed for the contractor to document how they plan to accomplish the work. The application is accessible to over 300 designated NASA and contractor employees via two Web sites. For each employee, the application regulates access according to the employee s authority to enter, view, and/or print out diverse information, including reports, work plans, purchase orders, and financial data. Advanced features of this application include on-line approval capability, automatic e-mail notifications requesting review by subsequent approvers, and security inside and outside the firewall.

Application and Adaptation of an Institutional Learning Framework

ERIC Educational Resources Information Center

Foutz, Susan; Emmons, Claire Thoma

2017-01-01

The Children's Museum of Indianapolis has used a mission-aligned learning framework for more than a decade. Designed to foster and support adult-child interaction in exhibitions and programs, the central tool of the family learning framework is the Assessment of Learning Families in Exhibits (ALFIE) Inventory. ALFIE is used as a tool to plan for…

Designing a Decision-Support System for Enrollment Management. AIR 1985 Annual Forum Paper.

ERIC Educational Resources Information Center

Glover, Robert H.

University of Hartford's decision-support system for enrollment management, which uses fourth-generation software tools, is described, with attention to the conceptual framework, design and implementation plan, and progress to date. The university's planners, institutional researchers, and admissions and financial aid officers are cooperating in…

Designing an Amusement Park Ride

ERIC Educational Resources Information Center

Kurz, Terri L.; Robles, Rolando

2016-01-01

To improve access to STEM curriculum, an activity was planned that presents the opportunity to design and build using gears and other tools. In this challenge, preservice elementary school teachers were asked to mathematically analyze gears and create an amusement park ride that uses gears to spin. Although this lesson was implemented with…

Asphalt Overlay Design Methods for Rigid Pavements Considering Rutting, Reflection Cracking, and Fatigue Cracking

DOT National Transportation Integrated Search

1998-10-01

The overall objectives of this study were (1) to provide basic performance evaluation of asphalt overlays on rigid pavements and (2) to provide a design tool for supporting a long-range rehabilitation plan for the US 59 : corridor in the Lufkin Distr...

Applicability of the Design Tool for Inventory and Monitoring (DTIM) and the Explore Sample Data Tool for the Assessment of Caribbean Forest Dynamics

Treesearch

Humfredo Marcano-Vega; Andrew Lister; Kevin Megown; Charles Scott

2016-01-01

There is a growing need within the insular Caribbean for technical assistance in planning forest-monitoring projects and data analysis. This paper gives an overview of software tools developed by the USDA Forest Service’s National Inventory and Monitoring Applications Center and the Remote Sensing Applications Center. We discuss their applicability in the efficient...

The Lunar Mapping and Modeling Project

NASA Technical Reports Server (NTRS)

Nall, M.; French, R.; Noble, S.; Muery, K.

2010-01-01

The Lunar Mapping and Modeling Project (LMMP) is managing a suite of lunar mapping and modeling tools and data products that support lunar exploration activities, including the planning, de-sign, development, test, and operations associated with crewed and/or robotic operations on the lunar surface. Although the project was initiated primarily to serve the needs of the Constellation program, it is equally suited for supporting landing site selection and planning for a variety of robotic missions, including NASA science and/or human precursor missions and commercial missions such as those planned by the Google Lunar X-Prize participants. In addition, LMMP should prove to be a convenient and useful tool for scientific analysis and for education and public out-reach (E/PO) activities.

SU-F-P-03: Management of Time to Treatment Inititation: Case for An Electronic Whiteboard

DOE Office of Scientific and Technical Information (OSTI.GOV)

Adnani, N

2016-06-15

Purpose: To determine if data mining of an electronic whiteboard improves the management of the Time to Treatment Initiation (TTI) in radiation oncology. Methods: An electronic whiteboard designed to help in managing the planning workflow and improves communication regarding patient planning progress was used to record the dates at which each phase of the planning process began or completed. These are CT Sim date, Plan Start, Physician Review, Physicist Review, Approval for Treatment Delivery, Setup or Verification of Simulation. Results: During clinical implementation, the electronic whiteboard was able to fulfill its primary objective of providing a transparent account of themore » planning progress of each patient. Peer pressure also meant that individual tasks, such as contouring, were easily brought to the attention of the responsible party and prioritized accordingly. Data mining to analyze the electronic whiteboard per patient (figure 1), per diagnosis (figure 2), per treatment modality (figure 3), per physician (figure 4), per planner (figure 5), etc., added another sophisticated tool in the management of Time to Treatment Initiation without compromising quality of the plans being generated. A longer than necessary time between CT Sim and Plan Start can be discussed among the members of the treatment team as an indication of inadequate/outdated CT Simulator, Contouring Tools, Image Fusion Tools, Other Imaging Studies (MRI, PET/CT) performed, etc. The same for the Plan Start to Physician Review where an extended time than expected may be due unrealistic planning goals, limited planning system features, etc. Conclusion: An Electronic Whiteboard in radiation oncology is not only helping with organizing planning workflow, it is also a potent tool that can be used to reduce the Time to Treatment Initiation by providing the clinic with hard data about the duration of each phase treatment planning as a function of different variable affecting the planning process. The work is supported by the Global Medical Physics Institute.« less

Network Performance Evaluation Model for assessing the impacts of high-occupancy vehicle facilities

DOE Office of Scientific and Technical Information (OSTI.GOV)

Janson, B.N.; Zozaya-Gorostiza, C.; Southworth, F.

1986-09-01

A model to assess the impacts of major high-occupancy vehicle (HOV) facilities on regional levels of energy consumption and vehicle air pollution emissions in urban aeas is developed and applied. This model can be used to forecast and compare the impacts of alternative HOV facility design and operation plans on traffic patterns, travel costs, model choice, travel demand, energy consumption and vehicle emissions. The model is designed to show differences in the overall impacts of alternative HOV facility types, locations and operation plans rather than to serve as a tool for detailed engineering design and traffic planning studies. The Networkmore » Performance Evaluation Model (NETPEM) combines several urban transportation planning models within a multi-modal network equilibrium framework including modules with which to define the type, location and use policy of the HOV facility to be tested, and to assess the impacts of this facility.« less

Pegasus hypersonic flight research

NASA Technical Reports Server (NTRS)

Curry, Robert E.; Meyer, Robert R., Jr.; Budd, Gerald D.

1992-01-01

Hypersonic aeronautics research using the Pegasus air-launched space booster is described. Two areas are discussed in the paper: previously obtained results from Pegasus flights 1 and 2, and plans for future programs. Proposed future research includes boundary-layer transition studies on the airplane-like first stage and also use of the complete Pegasus launch system to boost a research vehicle to hypersonic speeds. Pegasus flight 1 and 2 measurements were used to evaluate the results of several analytical aerodynamic design tools applied during the development of the vehicle as well as to develop hypersonic flight-test techniques. These data indicated that the aerodynamic design approach for Pegasus was adequate and showed that acceptable margins were available. Additionally, the correlations provide insight into the capabilities of these analytical tools for more complex vehicles in which design margins may be more stringent. Near-term plans to conduct hypersonic boundary-layer transition studies are discussed. These plans involve the use of a smooth metallic glove at about the mid-span of the wing. Longer-term opportunities are proposed which identify advantages of the Pegasus launch system to boost large-scale research vehicles to the real-gas hypersonic flight regime.

Advanced manufacturing development of a composite empennage component for L-1011 aircraft

NASA Technical Reports Server (NTRS)

Alva, T.; Henkel, J.; Johnson, R.; Carll, B.; Jackson, A.; Mosesian, B.; Brozovic, R.; Obrien, R.; Eudaily, R.

1982-01-01

This is the final report of technical work conducted during the fourth phase of a multiphase program having the objective of the design, development and flight evaluation of an advanced composite empennage component manufactured in a production environment at a cost competitive with those of its metal counterpart, and at a weight savings of at least 20 percent. The empennage component selected for this program is the vertical fin box of the L-1011 aircraft. The box structure extends from the fuselage production joint to the tip rib and includes front and rear spars. During Phase 4 of the program, production quality tooling was designed and manufactured to produce three sets of covers, ribs, spars, miscellaneous parts, and subassemblies to assemble three complete ACVF units. Recurring and nonrecurring cost data were compiled and documented in the updated producibility/design to cost plan. Nondestruct inspections, quality control tests, and quality acceptance tests were performed in accordance with the quality assurance plan and the structural integrity control plan. Records were maintained to provide traceability of material and parts throughout the manufacturing development phase. It was also determined that additional tooling would not be required to support the current and projected L-1011 production rate.

Visual display aid for orbital maneuvering - Design considerations

NASA Technical Reports Server (NTRS)

Grunwald, Arthur J.; Ellis, Stephen R.

1993-01-01

This paper describes the development of an interactive proximity operations planning system that allows on-site planning of fuel-efficient multiburn maneuvers in a potential multispacecraft environment. Although this display system most directly assists planning by providing visual feedback to aid visualization of the trajectories and constraints, its most significant features include: (1) the use of an 'inverse dynamics' algorithm that removes control nonlinearities facing the operator, and (2) a trajectory planning technique that separates, through a 'geometric spreadsheet', the normally coupled complex problems of planning orbital maneuvers and allows solution by an iterative sequence of simple independent actions. The visual feedback of trajectory shapes and operational constraints, provided by user-transparent and continuously active background computations, allows the operator to make fast, iterative design changes that rapidly converge to fuel-efficient solutions. The planning tool provides an example of operator-assisted optimization of nonlinear cost functions.

SPANR planning and scheduling

NASA Astrophysics Data System (ADS)

Freund, Richard F.; Braun, Tracy D.; Kussow, Matthew; Godfrey, Michael; Koyama, Terry

2001-07-01

SPANR (Schedule, Plan, Assess Networked Resources) is (i) a pre-run, off-line planning and (ii) a runtime, just-in-time scheduling mechanism. It is designed to support primarily commercial applications in that it optimizes throughput rather than individual jobs (unless they have highest priority). Thus it is a tool for a commercial production manager to maximize total work. First the SPANR Planner is presented showing the ability to do predictive 'what-if' planning. It can answer such questions as, (i) what is the overall effect of acquiring new hardware or (ii) what would be the effect of a different scheduler. The ability of the SPANR Planner to formulate in advance tree-trimming strategies is useful in several commercial applications, such as electronic design or pharmaceutical simulations. The SPANR Planner is demonstrated using a variety of benchmarks. The SPANR Runtime Scheduler (RS) is briefly presented. The SPANR RS can provide benefit for several commercial applications, such as airframe design and financial applications. Finally a design is shown whereby SPANR can provide scheduling advice to most resource management systems.

Control/structure interaction design methodology

NASA Technical Reports Server (NTRS)

Briggs, Hugh C.; Layman, William E.

1989-01-01

The Control Structure Interaction Program is a technology development program for spacecraft that exhibit interactions between the control system and structural dynamics. The program objectives include development and verification of new design concepts (such as active structure) and new tools (such as a combined structure and control optimization algorithm) and their verification in ground and possibly flight test. The new CSI design methodology is centered around interdisciplinary engineers using new tools that closely integrate structures and controls. Verification is an important CSI theme and analysts will be closely integrated to the CSI Test Bed laboratory. Components, concepts, tools and algorithms will be developed and tested in the lab and in future Shuttle-based flight experiments. The design methodology is summarized in block diagrams depicting the evolution of a spacecraft design and descriptions of analytical capabilities used in the process. The multiyear JPL CSI implementation plan is described along with the essentials of several new tools. A distributed network of computation servers and workstations was designed that will provide a state-of-the-art development base for the CSI technologies.

Modelling of tunnelling processes and rock cutting tool wear with the particle finite element method

NASA Astrophysics Data System (ADS)

Carbonell, Josep Maria; Oñate, Eugenio; Suárez, Benjamín

2013-09-01

Underground construction involves all sort of challenges in analysis, design, project and execution phases. The dimension of tunnels and their structural requirements are growing, and so safety and security demands do. New engineering tools are needed to perform a safer planning and design. This work presents the advances in the particle finite element method (PFEM) for the modelling and the analysis of tunneling processes including the wear of the cutting tools. The PFEM has its foundation on the Lagrangian description of the motion of a continuum built from a set of particles with known physical properties. The method uses a remeshing process combined with the alpha-shape technique to detect the contacting surfaces and a finite element method for the mechanical computations. A contact procedure has been developed for the PFEM which is combined with a constitutive model for predicting the excavation front and the wear of cutting tools. The material parameters govern the coupling of frictional contact and wear between the interacting domains at the excavation front. The PFEM allows predicting several parameters which are relevant for estimating the performance of a tunnelling boring machine such as wear in the cutting tools, the pressure distribution on the face of the boring machine and the vibrations produced in the machinery and the adjacent soil/rock. The final aim is to help in the design of the excavating tools and in the planning of the tunnelling operations. The applications presented show that the PFEM is a promising technique for the analysis of tunnelling problems.

DoD Key Technologies Plan

DTIC Science & Technology

1992-07-01

methodologies ; software performance analysis; software testing; and concurrent languages. Finally, efforts in algorithms, which are primarily designed to upgrade...These codes provide a powerful research tool for testing new concepts and designs prior to experimental implementation. DoE’s laser program has also...development, and specially designed production facilities. World leadership in bth non -fluorinated and fluorinated materials resides in the U.S. but Japan

Planned Axial Reorientation Investigation on Sloshsat

NASA Technical Reports Server (NTRS)

Chato, David J.

2000-01-01

This paper details the design and logic of an experimental investigation to study axial reorientation in low gravity. The Sloshsat free-flyer is described. The planned axial reorientation experiments and test matrixes are presented. Existing analytical tools are discussed. Estimates for settling range from 64 to 1127 seconds. The planned experiments are modelled using computational fluid dynamics. These models show promise in reducing settling estimates and demonstrate the ability of pulsed high thrust settling to emulate lower thrust continuous firing.

Effects of a Patient-Provider, Collaborative, Medication-Planning Tool: A Randomized, Controlled Trial

PubMed Central

Wolf, Michael S.; Kaiser, Darren; Morrow, Daniel G.

2016-01-01

Among patients with various levels of health literacy, the effects of collaborative, patient-provider, medication-planning tools on outcomes relevant to self-management are uncertain. Objective. Among adult patients with type II diabetes mellitus, we tested the effectiveness of a medication-planning tool (Medtable™) implemented via an electronic medical record to improve patients' medication knowledge, adherence, and glycemic control compared to usual care. Design. A multicenter, randomized controlled trial in outpatient primary care clinics. 674 patients received either the Medtable tool or usual care and were followed up for up to 12 months. Results. Patients who received Medtable had greater knowledge about indications for medications in their regimens and were more satisfied with the information about their medications. Patients' knowledge of drug indication improved with Medtable regardless of their literacy status. However, Medtable did not improve patients' demonstrated medication use, regimen adherence, or glycemic control (HbA1c). Conclusion. The Medtable tool supported provider/patient collaboration related to medication use, as reflected in patient satisfaction with communication, but had limited impact on patient medication knowledge, adherence, and HbA1c outcomes. This trial is registered with ClinicalTrials.gov NCT01296633. PMID:27699179

Development, features and application of DIET ASSESS & PLAN (DAP) software in supporting public health nutrition research in Central Eastern European Countries (CEEC).

PubMed

Gurinović, Mirjana; Milešević, Jelena; Kadvan, Agnes; Nikolić, Marina; Zeković, Milica; Djekić-Ivanković, Marija; Dupouy, Eleonora; Finglas, Paul; Glibetić, Maria

2018-01-01

In order to meet growing public health nutrition challenges in Central Eastern European Countries (CEEC) and Balkan countries, development of a Research Infrastructure (RI) and availability of an effective nutrition surveillance system are a prerequisite. The building block of this RI is an innovative tool called DIET ASSESS & PLAN (DAP), which is a platform for standardized and harmonized food consumption collection, comprehensive dietary intake assessment and nutrition planning. Its unique structure enables application of national food composition databases (FCDBs) from the European food composition exchange platform (28 national FCDBs) developed by EuroFIR (http://www.eurofir.org/) and in addition allows communication with other tools. DAP is used for daily menu and/or long-term diet planning in diverse public sector settings, foods design/reformulation, food labelling, nutrient intake assessment and calculation of the dietary diversity indicator, Minimum Dietary Diversity-Women (MDD-W). As a validated tool in different national and international projects, DAP represents an important RI in public health nutrition epidemiology in the CEEC region. Copyright © 2016 Elsevier Ltd. All rights reserved.

Automated and comprehensive link engineering supporting branched, ring, and mesh network topologies

NASA Astrophysics Data System (ADS)

Farina, J.; Khomchenko, D.; Yevseyenko, D.; Meester, J.; Richter, A.

2016-02-01

Link design, while relatively easy in the past, can become quite cumbersome with complex channel plans and equipment configurations. The task of designing optical transport systems and selecting equipment is often performed by an applications or sales engineer using simple tools, such as custom Excel spreadsheets. Eventually, every individual has their own version of the spreadsheet as well as their own methodology for building the network. This approach becomes unmanageable very quickly and leads to mistakes, bending of the engineering rules and installations that do not perform as expected. We demonstrate a comprehensive planning environment, which offers an efficient approach to unify, control and expedite the design process by controlling libraries of equipment and engineering methodologies, automating the process and providing the analysis tools necessary to predict system performance throughout the system and for all channels. In addition to the placement of EDFAs and DCEs, performance analysis metrics are provided at every step of the way. Metrics that can be tracked include power, CD and OSNR, SPM, XPM, FWM and SBS. Automated routine steps assist in design aspects such as equalization, padding and gain setting for EDFAs, the placement of ROADMs and transceivers, and creating regeneration points. DWDM networks consisting of a large number of nodes and repeater huts, interconnected in linear, branched, mesh and ring network topologies, can be designed much faster when compared with conventional design methods. Using flexible templates for all major optical components, our technology-agnostic planning approach supports the constant advances in optical communications.

An Analysis of Individual Teachers' Development of Instruction Based on ClassScape Program Data

ERIC Educational Resources Information Center

Parker, Jason L.

2011-01-01

This dissertation was designed to examine and assess the effectiveness of the ClassScape formative assessment tool on the planning, implementation, and evaluation of instruction at a rural middle school in western North Carolina. The teachers had the ClassScape program for 3 years, but were not using the program to plan future instruction. The…

Safe Schooling: Always at the Ready

ERIC Educational Resources Information Center

Moore, Brian N.

2012-01-01

Those who spent time in the classroom recognize the need to formulate well-designed lesson plans before they can provide a first-rate education. A lesson plan provides guidance on what they will be teaching, the tools they will need to teach a lesson, and their expectations for the outcomes of the lesson--what kids will learn. The same is true for…

South Australia's River Murray: Social and cultural values in water planning

NASA Astrophysics Data System (ADS)

Mooney, Carla; Tan, Poh-Ling

2012-12-01

SummaryThe South Australian River Murray is at the end of the Murray-Darling Basin which spans four Australian states, and is reliant on upstream flow. Under the Murray-Darling Basin Agreement, South Australia has an annual entitlement of 1850 GL flow. In the recent debilitating drought, the Agreement was put 'on hold' while emergency sharing arrangements provided for critical human needs, with meagre supplies for any other consumptive use. The drought also impacted on environmental values already compromised by river regulation and the high levels of water consumption. Conducted during the policy development phase of a second water allocation plan, our research trialled three tools designed to assess economic, social and cultural values for the new plan. The first was a pilot social impact study of effects of changing water availability in the Murraylands. In the second, researchers used a participatory modelling tool conjunctively with multi-criteria analysis to identify community values relevant to the prioritisation of environmental assets in the context of water scarcity. The third tool addressed Indigenous cultural values associated with water. Results of trials demonstrate that identifying public and social values in water require a number of interactive and deliberative tools in order to engage the broad community in water planning. Of the three tools, the most innovative was the second tool as it facilitated deliberation about the relative importance of the environment and helped shift individuals from entrenched interest based positions to consensus on values in wetlands.

I-FORCAST: Rapid Flight Planning Tool

NASA Technical Reports Server (NTRS)

Oaida, Bogdan; Khan, Mohammed; Mercury, Michael B.

2012-01-01

I-FORCAST (Instrument - Field of Regard Coverage Analysis and Simulation Tool) is a flight planning tool specifically designed for quickly verifying the feasibility and estimating the cost of airborne remote sensing campaigns (see figure). Flights are simulated by being broken into three predefined routing algorithms as necessary: mapping in a snaking pattern, mapping the area around a point target (like a volcano) with a star pattern, and mapping the area between a list of points. The tool has been used to plan missions for radar, lidar, and in-situ atmospheric measuring instruments for a variety of aircraft. It has also been used for global and regional scale campaigns and automatically includes landings when refueling is required. The software has been compared to the flight times of known commercial aircraft route travel times, as well as a UAVSAR (Uninhabited Aerial Vehicle Synthetic Aperture Radar) campaign, and was within 15% of the actual flight time. Most of the discrepancy is due to non-optimal flight paths taken by actual aircraft to avoid restricted airspace and used to follow landing and take-off corridors.

Preparing GMAT for Operational Maneuver Planning of the Advanced Composition Explorer (ACE)

NASA Technical Reports Server (NTRS)

Qureshi, Rizwan Hamid; Hughes, Steven P.

2014-01-01

The General Mission Analysis Tool (GMAT) is an open-source space mission design, analysis and trajectory optimization tool. GMAT is developed by a team of NASA, private industry, public and private contributors. GMAT is designed to model, optimize and estimate spacecraft trajectories in flight regimes ranging from low Earth orbit to lunar applications, interplanetary trajectories and other deep space missions. GMAT has also been flight qualified to support operational maneuver planning for the Advanced Composition Explorer (ACE) mission. ACE was launched in August, 1997 and is orbiting the Sun-Earth L1 libration point. The primary science objective of ACE is to study the composition of both the solar wind and the galactic cosmic rays. Operational orbit determination, maneuver operations and product generation for ACE are conducted by NASA Goddard Space Flight Center (GSFC) Flight Dynamics Facility (FDF). This paper discusses the entire engineering lifecycle and major operational certification milestones that GMAT successfully completed to obtain operational certification for the ACE mission. Operational certification milestones such as gathering of the requirements for ACE operational maneuver planning, gap analysis, test plans and procedures development, system design, pre-shadow operations, training to FDF ACE maneuver planners, shadow operations, Test Readiness Review (TRR) and finally Operational Readiness Review (ORR) are discussed. These efforts have demonstrated that GMAT is flight quality software ready to support ACE mission operations in the FDF.

Geometry and gravity influences on strength capability

NASA Technical Reports Server (NTRS)

Poliner, Jeffrey; Wilmington, Robert P.; Klute, Glenn K.

1994-01-01

Strength, defined as the capability of an individual to produce an external force, is one of the most important determining characteristics of human performance. Knowledge of strength capabilities of a group of individuals can be applied to designing equipment and workplaces, planning procedures and tasks, and training individuals. In the manned space program, with the high risk and cost associated with spaceflight, information pertaining to human performance is important to ensuring mission success and safety. Knowledge of individual's strength capabilities in weightlessness is of interest within many areas of NASA, including workplace design, tool development, and mission planning. The weightless environment of space places the human body in a completely different context. Astronauts perform a variety of manual tasks while in orbit. Their ability to perform these tasks is partly determined by their strength capability as demanded by that particular task. Thus, an important step in task planning, development, and evaluation is to determine the ability of the humans performing it. This can be accomplished by utilizing quantitative techniques to develop a database of human strength capabilities in weightlessness. Furthermore, if strength characteristics are known, equipment and tools can be built to optimize the operators' performance. This study examined strength in performing a simple task, specifically, using a tool to apply a torque to a fixture.

Innovated Conceptual Design of Loading Unloading Tool for Livestock at the Port

NASA Astrophysics Data System (ADS)

Mustakim, Achmad; Hadi, Firmanto

2018-03-01

The condition of loading and unloading process of livestock in a number of Indonesian ports doesn’t meet the principle of animal welfare, which makes cattle lose weight and injury when unloaded. Livestock loading and unloading is done by throwing cattle into the sea one by one, tying cattle hung with a sling strap and push the cattle to the berth directly. This process is against PP. 82 year 2000 on Article 47 and 55 about animal welfare. Innovation of loading and unloading tools design offered are loading and unloading design with garbarata. In the design of loading and unloading tools with garbarata, apply the concept of semi-horizontal hydraulic ladder that connects the ship and truck directly. This livestock unloading equipment design innovation is a combination of fire extinguisher truck design and bridge equipped with weightlifting equipment. In 10 years of planning garbarata, requires a total cost of IDR 321,142,921; gets benefits IDR 923,352,333; and BCR (Benefit-Cost Ratio) Value worth 2.88. BCR value >1 means the tool is feasible applied. The designs of this loading and unloading tools are estimated up to 1 hour faster than existing way. It can also minimize risks such as injury and also weight reduction livestock agencies significantly.

Visualization, documentation, analysis, and communication of large scale gene regulatory networks

PubMed Central

Longabaugh, William J.R.; Davidson, Eric H.; Bolouri, Hamid

2009-01-01

Summary Genetic regulatory networks (GRNs) are complex, large-scale, and spatially and temporally distributed. These characteristics impose challenging demands on computational GRN modeling tools, and there is a need for custom modeling tools. In this paper, we report on our ongoing development of BioTapestry, an open source, freely available computational tool designed specifically for GRN modeling. We also outline our future development plans, and give some examples of current applications of BioTapestry. PMID:18757046

The use of computer graphic simulation in the development of on-orbit tele-robotic systems

NASA Technical Reports Server (NTRS)

Fernandez, Ken; Hinman, Elaine

1987-01-01

This paper describes the use of computer graphic simulation techniques to resolve critical design and operational issues for robotic systems used for on-orbit operations. These issues are robot motion control, robot path-planning/verification, and robot dynamics. The major design issues in developing effective telerobotic systems are discussed, and the use of ROBOSIM, a NASA-developed computer graphic simulation tool, to address these issues is presented. Simulation plans for the Space Station and the Orbital Maneuvering Vehicle are presented and discussed.

An Investigation of the Factors That Influence Preservice Teachers' Intentions and Integration of Web 2.0 Tools

ERIC Educational Resources Information Center

Sadaf, Ayesha; Newby, Timothy J.; Ertmer, Peggy A.

2016-01-01

The purpose of the study was to investigate factors that predict preservice teachers' intentions and actual uses of Web 2.0 tools in their classrooms. A two-phase, mixed method, sequential explanatory design was used. The first phase explored factors, based on the decomposed theory of planned behavior, that predict preservice teachers' intentions…

Development of a Virtual Tool for Learning Basic Organisation and Planning in Rural Engineering Projects

ERIC Educational Resources Information Center

Redel-Macías, María Dolores; Castillo, Carlos; Aguilar Porro, Cristina; Polo, María; Taguas, Encarnación V.

2014-01-01

This paper presents a virtual lab for the contents of an Engineering project, for designing an agro-industrial building, which is also useful for a range of different transversal courses in Engineering sciences. The aims of this tool are to analyse the most important contents of a project-document (calculation, regulations, drawings and budgets),…

Fault Tree Analysis: A Research Tool for Educational Planning. Technical Report No. 1.

ERIC Educational Resources Information Center

Alameda County School Dept., Hayward, CA. PACE Center.

This ESEA Title III report describes fault tree analysis and assesses its applicability to education. Fault tree analysis is an operations research tool which is designed to increase the probability of success in any system by analyzing the most likely modes of failure that could occur. A graphic portrayal, which has the form of a tree, is…

Optimum-AIV: A planning and scheduling system for spacecraft AIV

NASA Technical Reports Server (NTRS)

Arentoft, M. M.; Fuchs, Jens J.; Parrod, Y.; Gasquet, Andre; Stader, J.; Stokes, I.; Vadon, H.

1991-01-01

A project undertaken for the European Space Agency (ESA) is presented. The project is developing a knowledge based software system for planning and scheduling of activities for spacecraft assembly, integration, and verification (AIV). The system extends into the monitoring of plan execution and the plan repair phase. The objectives are to develop an operational kernel of a planning, scheduling, and plan repair tool, called OPTIMUM-AIV, and to provide facilities which will allow individual projects to customize the kernel to suit its specific needs. The kernel shall consist of a set of software functionalities for assistance in initial specification of the AIV plan, in verification and generation of valid plans and schedules for the AIV activities, and in interactive monitoring and execution problem recovery for the detailed AIV plans. Embedded in OPTIMUM-AIV are external interfaces which allow integration with alternative scheduling systems and project databases. The current status of the OPTIMUM-AIV project, as of Jan. 1991, is that a further analysis of the AIV domain has taken place through interviews with satellite AIV experts, a software requirement document (SRD) for the full operational tool was approved, and an architectural design document (ADD) for the kernel excluding external interfaces is ready for review.

Lakeside: Merging Urban Design with Scientific Analysis

ScienceCinema

Guzowski, Leah; Catlett, Charlie; Woodbury, Ed

2018-01-16

Researchers at the U.S. Department of Energy's Argonne National Laboratory and the University of Chicago are developing tools that merge urban design with scientific analysis to improve the decision-making process associated with large-scale urban developments. One such tool, called LakeSim, has been prototyped with an initial focus on consumer-driven energy and transportation demand, through a partnership with the Chicago-based architectural and engineering design firm Skidmore, Owings & Merrill, Clean Energy Trust and developer McCaffery Interests. LakeSim began with the need to answer practical questions about urban design and planning, requiring a better understanding about the long-term impact of design decisions on energy and transportation demand for a 600-acre development project on Chicago's South Side - the Chicago Lakeside Development project.

A brief understanding of process optimisation in microwave-assisted extraction of botanical materials: options and opportunities with chemometric tools.

PubMed

Das, Anup Kumar; Mandal, Vivekananda; Mandal, Subhash C

2014-01-01

Extraction forms the very basic step in research on natural products for drug discovery. A poorly optimised and planned extraction methodology can jeopardise the entire mission. To provide a vivid picture of different chemometric tools and planning for process optimisation and method development in extraction of botanical material, with emphasis on microwave-assisted extraction (MAE) of botanical material. A review of studies involving the application of chemometric tools in combination with MAE of botanical materials was undertaken in order to discover what the significant extraction factors were. Optimising a response by fine-tuning those factors, experimental design or statistical design of experiment (DoE), which is a core area of study in chemometrics, was then used for statistical analysis and interpretations. In this review a brief explanation of the different aspects and methodologies related to MAE of botanical materials that were subjected to experimental design, along with some general chemometric tools and the steps involved in the practice of MAE, are presented. A detailed study on various factors and responses involved in the optimisation is also presented. This article will assist in obtaining a better insight into the chemometric strategies of process optimisation and method development, which will in turn improve the decision-making process in selecting influential extraction parameters. Copyright © 2013 John Wiley & Sons, Ltd.

Optimizing digital elevation models (DEMs) accuracy for planning and design of mobile communication networks

NASA Astrophysics Data System (ADS)

Hassan, Mahmoud A.

2004-02-01

Digital elevation models (DEMs) are important tools in the planning, design and maintenance of mobile communication networks. This research paper proposes a method for generating high accuracy DEMs based on SPOT satellite 1A stereo pair images, ground control points (GCP) and Erdas OrthoBASE Pro image processing software. DEMs with 0.2911 m mean error were achieved for the hilly and heavily populated city of Amman. The generated DEM was used to design a mobile communication network resulted in a minimum number of radio base transceiver stations, maximum number of covered regions and less than 2% of dead zones.

Multimedia Projects in Education: Designing, Producing, and Assessing, Third Edition

ERIC Educational Resources Information Center

Ivers, Karen S.; Barron, Ann E.

2005-01-01

Building on the materials in the two previous successful editions, this book features approximately 40% all new material and updates the previous information. The authors use the DDD-E model (Decide, Design, Develop--Evaluate) to show how to select and plan multimedia projects, use presentation and development tools, manage graphics, audio, and…

A Digital Library for Education: The PEN-DOR Project.

ERIC Educational Resources Information Center

Fullerton, Karen; Greenberg, Jane; McClure, Maureen; Rasmussen, Edie; Stewart, Darin

1999-01-01

Describes Pen-DOR (Pennsylvania Education Network Digital Object Repository), a digital library designed to provide K-12 educators with access to multimedia resources and tools to create new lesson plans and modify existing ones via the World Wide Web. Discusses design problems of a distributed, object-oriented database architecture and describes…

Development and First Phase Evaluation of a Maternity Leave Educational Tool for Pregnant, Working Women in California

PubMed Central

Kurtovich, Elaine; Guendelman, Sylvia; Neuhauser, Linda; Edelman, Dana; Georges, Maura; Mason-Marti, Peyton

2015-01-01

Background Despite the provision of maternity leave offered to mothers, many American women fail to take leave. Methods We developed an evidence-based maternity leave educational tool for working women in California using participatory design. We tested its short-term efficacy with a randomized controlled trial of pregnant English-speakers (n=155). Results Among intervention participants exposed to the tool, 65% reported that they learned something new; 38% were motivated to seek more information; and 49% said it helped them plan their maternity leave. Among participants who delivered at ≥ 37 weeks gestation and said the tool helped them plan their leave, 89% took more than one week of prenatal leave, a significantly higher proportion than among controls who did not receive the tool (64%, p=0.049). Other findings favored trial participants, but were not statistically significant in this small sample. More intervention participants took some prenatal leave (80%) vs. controls (74%, p=0.44). Among participants who had returned to work when surveyed (n=50), mean postnatal leave uptake was on average 1 week longer for intervention participants vs. controls (13.3 vs. 12.2 weeks, p=0.54). Conclusions The first-phase evaluation of this tool shows that it successfully informed women about maternity leave options, clarified complex regulations, encouraged women to seek further information and helped plan maternity leave. Compared to controls, trial participants who used the tool to plan their leave were far more likely to take prenatal leave close to term. Future evaluation of the tool when mediated by a health provider or employer is warranted. PMID:26107519

A tool to convert CAD models for importation into Geant4

NASA Astrophysics Data System (ADS)

Vuosalo, C.; Carlsmith, D.; Dasu, S.; Palladino, K.; LUX-ZEPLIN Collaboration

2017-10-01

The engineering design of a particle detector is usually performed in a Computer Aided Design (CAD) program, and simulation of the detector’s performance can be done with a Geant4-based program. However, transferring the detector design from the CAD program to Geant4 can be laborious and error-prone. SW2GDML is a tool that reads a design in the popular SOLIDWORKS CAD program and outputs Geometry Description Markup Language (GDML), used by Geant4 for importing and exporting detector geometries. Other methods for outputting CAD designs are available, such as the STEP format, and tools exist to convert these formats into GDML. However, these conversion methods produce very large and unwieldy designs composed of tessellated solids that can reduce Geant4 performance. In contrast, SW2GDML produces compact, human-readable GDML that employs standard geometric shapes rather than tessellated solids. This paper will describe the development and current capabilities of SW2GDML and plans for its enhancement. The aim of this tool is to automate importation of detector engineering models into Geant4-based simulation programs to support rapid, iterative cycles of detector design, simulation, and optimization.

An intelligent advisor for the design manager

NASA Technical Reports Server (NTRS)

Rogers, James L.; Padula, Sharon L.

1989-01-01

A design problem is viewed as a complex system divisible into modules. Before the design of a complex system can begin, much time and money are spent in determining the couplings among modules and the presence of iterative loops. This is important because the design manager must know how to group the modules into substems and how to assign subsystems to design teams so that changes in one subsystem will have predictable effects on other subsystems. Determining these subsystems is not an easy, straightforward process and often important couplings are overlooked. Moreover, the planning task must be repeated as new information becomes available or as the design specifications change. The purchase of this research effort is to develop a knowledge-based tool to act as an intelligent advisor for the design manager. This tool identifies the subsystems of a complex design problem, orders them into a well-structured format, and marks the couplings among the subsystems to facilitate the use of multilevel tools. The tool was tested in the decomposition of the COFS (Control of Flexible Structures) mast design which has about 50 modules. This test indicated that this type of approach could lead to a substantial savings by organizing and displaying a complex problem as a sequence of subsystems easily divisible among design teams.

America's Next Great Ship: Space Launch System Core Stage Transitioning from Design to Manufacturing

NASA Technical Reports Server (NTRS)

Birkenstock, Benjamin; Kauer, Roy

2014-01-01

The Space Launch System (SLS) Program is essential to achieving the Nation's and NASA's goal of human exploration and scientific investigation of the solar system. As a multi-element program with emphasis on safety, affordability, and sustainability, SLS is becoming America's next great ship of exploration. The SLS Core Stage includes avionics, main propulsion system, pressure vessels, thrust vector control, and structures. Boeing manufactures and assembles the SLS core stage at the Michoud Assembly Facility (MAF) in New Orleans, LA, a historical production center for Saturn V and Space Shuttle programs. As the transition from design to manufacturing progresses, the importance of a well-executed manufacturing, assembly, and operation (MA&O) plan is crucial to meeting performance objectives. Boeing employs classic techniques such as critical path analysis and facility requirements definition as well as innovative approaches such as Constraint Based Scheduling (CBS) and Cirtical Chain Project Management (CCPM) theory to provide a comprehensive suite of project management tools to manage the health of the baseline plan on both a macro (overall project) and micro level (factory areas). These tools coordinate data from multiple business systems and provide a robust network to support Material & Capacity Requirements Planning (MRP/CRP) and priorities. Coupled with these tools and a highly skilled workforce, Boeing is orchestrating the parallel buildup of five major sub assemblies throughout the factory. Boeing and NASA are transforming MAF to host state of the art processes, equipment and tooling, the most prominent of which is the Vertical Assembly Center (VAC), the largest weld tool in the world. In concert, a global supply chain is delivering a range of structural elements and component parts necessary to enable an on-time delivery of the integrated Core Stage. SLS is on plan to launch humanity into the next phase of space exploration.

Prediction of Cutting Force in Turning Process-an Experimental Approach

NASA Astrophysics Data System (ADS)

Thangarasu, S. K.; Shankar, S.; Thomas, A. Tony; Sridhar, G.

2018-02-01

This Paper deals with a prediction of Cutting forces in a turning process. The turning process with advanced cutting tool has a several advantages over grinding such as short cycle time, process flexibility, compatible surface roughness, high material removal rate and less environment problems without the use of cutting fluid. In this a full bridge dynamometer has been used to measure the cutting forces over mild steel work piece and cemented carbide insert tool for different combination of cutting speed, feed rate and depth of cut. The experiments are planned based on taguchi design and measured cutting forces were compared with the predicted forces in order to validate the feasibility of the proposed design. The percentage contribution of each process parameter had been analyzed using Analysis of Variance (ANOVA). Both the experimental results taken from the lathe tool dynamometer and the designed full bridge dynamometer were analyzed using Taguchi design of experiment and Analysis of Variance.

Visual Analysis as a design and decision-making tool in the development of a quarry

Treesearch

Randall Boyd Fitzgerald

1979-01-01

In order to obtain local and state government approvals, an environmental impact analysis of the mining and reclamation of a proposed hard rock quarry was required. High visibility of the proposed mining area from the adjacent community required a visual impact analysis in the planning and design of the project. The Visual Analysis defined design criteria for the...

Graphical Requirements for Force Level Planning. Volume 2

DTIC Science & Technology

1991-09-01

technology review includes graphics algorithms, computer hardware, computer software, and design methodologies. The technology can either exist today or...level graphics language. 7.4 User Interface Design Tools As user interfaces have become more sophisticated, they have become harder to develop. Xl...Setphen M. Pizer, editors. Proceedings 1986 Workshop on Interactive 31) Graphics , October 1986. 18 J. S. Dumas. Designing User Interface Software. Prentice

Preservice elementary teachers learning to use curriculum materials to plan and teach science

NASA Astrophysics Data System (ADS)

Gunckel, Kristin Lee

New elementary teachers rely heavily on curriculum materials, but available science curriculum materials do not often support teachers in meeting specified learning goals, engaging students in the inquiry and application practices of science, or leveraging students' intellectual and cultural resources for learning. One approach to supporting new elementary teachers in using available science curriculum materials is to provide frameworks to scaffold preservice teachers' developing lesson planning and teaching practices. The Inquiry-Application Instructional Model (I-AIM) and the Critical Analysis and Planning (CA&P) tool were designed to scaffold preservice teachers' developing practice to use curriculum materials effectively to plan and teach science. The I-AIM identifies functions for each activity in an instructional sequence. The CA&P provides guides preservice teachers in modifying curriculum materials to better fit I-AIM and leverage students' resources for learning. This study followed three elementary preservice teachers in an intern-level science method course as they learned to use the I-AIM and CA&P to plan and teach a science unit in their field placement classrooms. Using a sociocultural perspective, this study focused on the ways that the interns used the tools and the mediators that influenced how they used the tools. A color-coding analysis procedure was developed to identify the teaching patterns in the interns' planned instructional approaches and enacted activity sequences and compare those to the patterns implied by the I-AIM and CA&P tools. Interviews with the interns were also conducted and analyzed, along with the assignments they completed for their science methods course, to gain insight into the meanings the interns made of the tools and their experiences planning and teaching science. The results show that all three interns had some successes using the I-AIM and CA&P to analyze their curriculum materials and to plan and teach science lessons. However, all three interns used the tools in different ways, and some of their ways of using the tools were different from the intentions for the tools. These differences can be accounted for by the variety of mediators that influenced the interns' use of the I-AIM and CA&P tools. These mediators were rooted in the Discourses at play in the various communities in which the interns participated during their teacher preparation program. Some of the practices and resources of these various Discourses interfered with or supported the interns' use of the I-AIM and CA&P tools. Each intern took a different trajectory through these Discourses and encountered different practices that mediated how each used the I-AIM and CA&P tools. The results of this study suggest that the goal of preparing preservice teachers to use the I-AIM and CA&P tools should be to provide preservice teachers with opportunities to use the tools and help them develop the metaknowledge about the tools necessary to critically analyze the affordances and weaknesses of different approaches to teaching science.

On the Development of a Hospital-Patient Web-Based Communication Tool: A Case Study From Norway.

PubMed

Granja, Conceição; Dyb, Kari; Bolle, Stein Roald; Hartvigsen, Gunnar

2015-01-01

Surgery cancellations are undesirable in hospital settings as they increase costs, reduce productivity and efficiency, and directly affect the patient. The problem of elective surgery cancellations in a North Norwegian University Hospital is addressed. Based on a three-step methodology conducted at the hospital, the preoperative planning process was modeled taking into consideration the narratives from different health professions. From the analysis of the generated process models, it is concluded that in order to develop a useful patient centered web-based communication tool, it is necessary to fully understand how hospitals plan and organize surgeries today. Moreover, process reengineering is required to generate a standard process that can serve as a tool for health ICT designers to define the requirements for a robust and useful system.

Collaborative Workshops for Assessment and Creation of Multi-Objective Decision Support for Multiple Sectors

NASA Astrophysics Data System (ADS)

Kasprzyk, J. R.; Smith, R.; Raseman, W. J.; DeRousseau, M. A.; Dilling, L.; Ozekin, K.; Summers, R. S.; Balaji, R.; Livneh, B.; Rosario-Ortiz, F.; Sprain, L.; Srubar, W. V., III

2017-12-01

This presentation will report on three projects that used interactive workshops with stakeholders to develop problem formulations for Multi-Objective Evolutionary Algorithm (MOEA)-based decision support in diverse fields - water resources planning, water quality engineering under climate extremes, and sustainable materials design. When combined with a simulation model of a system, MOEAs use intelligent search techniques to provide new plans or designs. This approach is gaining increasing prominence in design and planning for environmental sustainability. To use this technique, a problem formulation - objectives and constraints (quantitative measures of performance) and decision variables (actions that can be modified to improve the system) - must be identified. Although critically important for MOEA effectiveness, the problem formulations are not always developed with stakeholders' interests in mind. To ameliorate this issue, project workshops were organized to improve the tool's relevance as well as collaboratively build problem formulations that can be used in applications. There were interesting differences among the projects, which altered the findings of each workshop. Attendees ranged from a group of water managers on the Front Range of Colorado, to water utility representatives from across the country, to a set of designers, academics, and trade groups. The extent to which the workshop participants were already familiar with simulation tools contributed to their willingness to accept the solutions that were generated using the tool. Moreover, in some instances, brainstorming new objectives to include within the MOEA expanded the scope of the problem formulation, relative to the initial conception of the researchers. Through describing results across a diversity of projects, the goal of this presentation is to report on how our approach may inform future decision support collaboration with a variety of stakeholders and sectors.

Can we use virtual reality tools in the planning of an experiment?

NASA Astrophysics Data System (ADS)

Kucaba-Pietal, Anna; Szumski, Marek; Szczerba, Piotr

2015-03-01

Virtual reality (VR) has proved to be a particularly useful tool in engineering and design. A related area of aviation in which VR is particularly significant is a flight training, as it requires many hours of practice and using real planes for all training is both expensive and more dangerous. Research conducted at the Rzeszow University of Technology (RUT) showed that virtual reality can be successfully used for planning experiment during a flight tests. Motivation to the study were a wing deformation measurements of PW-6 glider in flight by use Image Pattern Correlation Technique (IPCT) planned within the frame of AIM2 project. The tool VirlIPCT was constructed, which permits to perform virtual IPCT setup on an airplane. Using it, we can test a camera position, camera resolution, pattern application. Moreover performed tests on RUT indicate, that VirlIPCT can be used as a virtual IPCT image generator. This paper presents results of the research on VirlIPCT.

Development Roadmap of an Evolvable and Extensible Multi-Mission Telecom Planning and Analysis Framework

NASA Technical Reports Server (NTRS)

Cheung, Kar-Ming; Tung, Ramona H.; Lee, Charles H.

2003-01-01

In this paper, we describe the development roadmap and discuss the various challenges of an evolvable and extensible multi-mission telecom planning and analysis framework. Our long-term goal is to develop a set of powerful flexible telecommunications analysis tools that can be easily adapted to different missions while maintain the common Deep Space Communication requirements. The ability of re-using the DSN ground models and the common software utilities in our adaptations has contributed significantly to our development efforts measured in terms of consistency, accuracy, and minimal effort redundancy, which can translate into shorter development time and major cost savings for the individual missions. In our roadmap, we will address the design principles, technical achievements and the associated challenges for following telecom analysis tools (i) Telecom Forecaster Predictor - TFP (ii) Unified Telecom Predictor - UTP (iii) Generalized Telecom Predictor - GTP (iv) Generic TFP (v) Web-based TFP (vi) Application Program Interface - API (vii) Mars Relay Network Planning Tool - MRNPT.

Design of a cooperative problem-solving system for en-route flight planning: An empirical evaluation

NASA Technical Reports Server (NTRS)

Layton, Charles; Smith, Philip J.; Mc Coy, C. Elaine

1994-01-01

Both optimization techniques and expert systems technologies are popular approaches for developing tools to assist in complex problem-solving tasks. Because of the underlying complexity of many such tasks, however, the models of the world implicitly or explicitly embedded in such tools are often incomplete and the problem-solving methods fallible. The result can be 'brittleness' in situations that were not anticipated by the system designers. To deal with this weakness, it has been suggested that 'cooperative' rather than 'automated' problem-solving systems be designed. Such cooperative systems are proposed to explicitly enhance the collaboration of the person (or a group of people) and the computer system. This study evaluates the impact of alternative design concepts on the performance of 30 airline pilots interacting with such a cooperative system designed to support en-route flight planning. The results clearly demonstrate that different system design concepts can strongly influence the cognitive processes and resultant performances of users. Based on think-aloud protocols, cognitive models are proposed to account for how features of the computer system interacted with specific types of scenarios to influence exploration and decision making by the pilots. The results are then used to develop recommendations for guiding the design of cooperative systems.

Design of a cooperative problem-solving system for en-route flight planning: An empirical evaluation

NASA Technical Reports Server (NTRS)

Layton, Charles; Smith, Philip J.; McCoy, C. Elaine

1994-01-01

Both optimization techniques and expert systems technologies are popular approaches for developing tools to assist in complex problem-solving tasks. Because of the underlying complexity of many such tasks, however, the models of the world implicitly or explicitly embedded in such tools are often incomplete and the problem-solving methods fallible. The result can be 'brittleness' in situations that were not anticipated by the system designers. To deal with this weakness, it has been suggested that 'cooperative' rather than 'automated' problem-solving systems be designed. Such cooperative systems are proposed to explicitly enhance the collaboration of the person (or a group of people) and the computer system. This study evaluates the impact of alternative design concepts on the performance of 30 airline pilots interacting with such a cooperative system designed to support enroute flight planning. The results clearly demonstrate that different system design concepts can strongly influence the cognitive processes and resultant performances of users. Based on think-aloud protocols, cognitive models are proposed to account for how features of the computer system interacted with specific types of scenarios to influence exploration and decision making by the pilots. The results are then used to develop recommendations for guiding the design of cooperative systems.

Engaging stakeholders to design a comparative effectiveness trial in children with uncontrolled asthma.

PubMed

Erwin, Kim; Martin, Molly A; Flippin, Tara; Norell, Sarah; Shadlyn, Ariana; Yang, Jie; Falco, Paula; Rivera, Jaime; Ignoffo, Stacy; Kumar, Rajesh; Margellos-Anast, Helen; McDermott, Michael; McMahon, Kate; Mosnaim, Giselle; Nyenhuis, Sharmilee M; Press, Valerie G; Ramsay, Jessica E; Soyemi, Kenneth; Thompson, Trevonne M; Krishnan, Jerry A

2016-01-01

To present the methods and outcomes of stakeholder engagement in the development of interventions for children presenting to the emergency department (ED) for uncontrolled asthma. We engaged stakeholders (caregivers, physicians, nurses, administrators) from six EDs in a three-phase process to: define design requirements; prototype and refine; and evaluate. Interviews among 28 stakeholders yielded themes regarding in-home asthma management practices and ED discharge experiences. Quantitative and qualitative evaluation showed strong preference for the new discharge tool over current tools. Engaging end-users in contextual inquiry resulted in CAPE (CHICAGO Action Plan after ED discharge), a new stakeholder-balanced discharge tool, which is being tested in a multicenter comparative effectiveness trial.

Determinants of Medicare plan choices: are beneficiaries more influenced by premiums or benefits?

PubMed

Jacobs, Paul D; Buntin, Melinda B

2015-07-01

To evaluate the sensitivity of Medicare beneficiaries to premiums and benefits when selecting healthcare plans after the introduction of Part D. We matched respondents in the 2008 Medicare Current Beneficiary Survey to the Medicare Advantage (MA) plans available to them using the Bid Pricing Tool and previously unavailable data on beneficiaries' plan choices. We estimated a 2-stage nested logit model of Medicare plan choice decision making, including the decision to choose traditional fee-for-service (FFS) Medicare or an MA plan, and for those choosing MA, which specific plan they chose. Beneficiaries living in areas with higher average monthly rebates available from MA plans were more likely to choose MA rather than FFS. When choosing MA plans, beneficiaries are roughly 2 to 3 times more responsive to dollars spent to reduce cost sharing than reductions in their premium. We calculated an elasticity of plan choice with respect to the monthly MA premium of -0.20. Beneficiaries with lower incomes are more sensitive to plan premiums and cost sharing than higher-income beneficiaries. MA plans appear to have a limited incentive to aggressively price their products, and seem to compete primarily over reduced beneficiary cost sharing. Given the limitations of the current plan choice environment, policies designed to encourage the selection of lower-cost plans may require increasing premium differences between plans and providing the tools to enable beneficiaries to easily assess those differences.

A unified approach for composite cost reporting and prediction in the ACT program

NASA Technical Reports Server (NTRS)

Freeman, W. Tom; Vosteen, Louis F.; Siddiqi, Shahid

1991-01-01

The Structures Technology Program Office (STPO) at NASA Langley Research Center has held two workshops with representatives from the commercial airframe companies to establish a plan for development of a standard cost reporting format and a cost prediction tool for conceptual and preliminary designers. This paper reviews the findings of the workshop representatives with a plan for implementation of their recommendations. The recommendations of the cost tracking and reporting committee will be implemented by reinstituting the collection of composite part fabrication data in a format similar to the DoD/NASA Structural Composites Fabrication Guide. The process of data collection will be automated by taking advantage of current technology with user friendly computer interfaces and electronic data transmission. Development of a conceptual and preliminary designers' cost prediction model will be initiated. The model will provide a technically sound method for evaluating the relative cost of different composite structural designs, fabrication processes, and assembly methods that can be compared to equivalent metallic parts or assemblies. The feasibility of developing cost prediction software in a modular form for interfacing with state of the art preliminary design tools and computer aided design (CAD) programs is assessed.

Land Use. An Instructional Unit for Teachers of Adult Vocational Education in Agriculture.

ERIC Educational Resources Information Center

Wise, Jack; Iverson, Maynard J.

An adult farmer course designed to develop the effective ability of land holders to plan for and implement wise land use is presented. The unit consists of eight lesson plans: (1) the importance of land use, (2) the physical and chemical properties of the soil, (3) soil testing as a tool of land use, (4) balanced fertilization of soils, (5)…

The RTI Daily Planning Book, K-6: Tools and Strategies for Collecting and Assessing Reading Data & Targeted Follow-Up Instruction

ERIC Educational Resources Information Center

Owocki, Gretchen

2010-01-01

Children's needs differ so vastly that a single program designed to support numerous students can only do so much. More than anything else, students need to use professional expertise to unravel their needs and to plan instruction that is directly responsive. This book makes exemplary RTI possible in every reading classroom. The author gives you…

A Semantic Web-Based Authoring Tool to Facilitate the Planning of Collaborative Learning Scenarios Compliant with Learning Theories

ERIC Educational Resources Information Center

Isotani, Seiji; Mizoguchi, Riichiro; Isotani, Sadao; Capeli, Olimpio M.; Isotani, Naoko; de Albuquerque, Antonio R. P. L.; Bittencourt, Ig. I.; Jaques, Patricia

2013-01-01

When the goal of group activities is to support long-term learning, the task of designing well-thought-out collaborative learning (CL) scenarios is an important key to success. To help students adequately acquire and develop their knowledge and skills, a teacher can plan a scenario that increases the probability for learning to occur. Such a…

An Introduction to Emergency Medical Services (EMS). Pre-Hospital Phase. Emergency Medical Services Orientation, Lesson Plan No. 9.

ERIC Educational Resources Information Center

Young, Derrick P.

Designed for use with interested students at high schools, community colleges, and four-year colleges, this lesson plan was developed to provide an introduction to the pre-hospital phase of Emergency Medical Services (EMS) and to serve as a recruitment tool for the EMS Program at Kapiolani Community College (KCC) in Hawaii. The objectives of the…

Algorithm for planning a double-jaw orthognathic surgery using a computer-aided surgical simulation (CASS) protocol. Part 1: planning sequence

PubMed Central

Xia, J. J.; Gateno, J.; Teichgraeber, J. F.; Yuan, P.; Chen, K.-C.; Li, J.; Zhang, X.; Tang, Z.; Alfi, D. M.

2015-01-01

The success of craniomaxillofacial (CMF) surgery depends not only on the surgical techniques, but also on an accurate surgical plan. The adoption of computer-aided surgical simulation (CASS) has created a paradigm shift in surgical planning. However, planning an orthognathic operation using CASS differs fundamentally from planning using traditional methods. With this in mind, the Surgical Planning Laboratory of Houston Methodist Research Institute has developed a CASS protocol designed specifically for orthognathic surgery. The purpose of this article is to present an algorithm using virtual tools for planning a double-jaw orthognathic operation. This paper will serve as an operation manual for surgeons wanting to incorporate CASS into their clinical practice. PMID:26573562

Economic considerations and decision support tool for wastewater reuse scheme planning.

PubMed

Hochstrat, R; Joksimovic, D; Wintgens, T; Melin, T; Savic, D

2007-01-01

The reuse of upgraded wastewater for beneficial uses is increasingly adopted and accepted as a tool in water management. However, funding of schemes is still a critical issue. The focus of this paper is on economic considerations of water reuse planning. A survey of pricing mechanisms for reclaimed water revealed that most schemes are subsidised to a great extent. In order to minimise these state contributions to the implementation and operation of reuse projects, their planning should identify a least cost design option. This also has to take into account the established pricing structure for conventional water resources and the possibility of gaining revenues from reclaimed water pricing. The paper presents a case study which takes into account these aspects. It evaluates different scheme designs with regard to their Net Present Value (NPV). It could be demonstrated that for the same charging level, quite different amounts of reclaimed water can be delivered while still producing an overall positive NPV. Moreover, the economic feasibility and competitiveness of a reuse scheme is highly determined by the cost structure of the conventional water market.

Computer-assisted template-guided custom-designed 3D-printed implant placement with custom-designed 3D-printed surgical tooling: an in-vitro proof of a novel concept.

PubMed

Anssari Moin, David; Derksen, Wiebe; Waars, Hugo; Hassan, Bassam; Wismeijer, Daniel

2017-05-01

The aim of this study was to introduce a new concept for computer-assisted template-guided placement of a custom 3D-designed/3D-printed implant with congruent custom 3D-designed/3D-printed surgical tooling and to test the feasibility and accuracy of this method in-vitro. One partially edentulous human mandibular cadaver was scanned with a cone-beam computed tomography (CBCT) system and intra-oral scan system. The 3D data of this cadaver were imported in specialized software and used to analyse the region of a missing tooth. Based on the functional and anatomical parameters, an individual implant with congruent surgical tooling and surgical guided template was designed and 3D-printed. The guided osteotomy was performed, and the custom implant inserted. To evaluate the planned implant position in comparison with the placed implant position, the mandible with implant was scanned again with the CBCT system and software matching was applied to measure the accuracy of the procedure. The angular deflection with the planned implant position was 0.40°. When comparing the 3D positions of the shoulder, there is a deviation of 0.72 mm resulting in an apical deviation of 0.72 mm. With the use of currently available technology, it is very well feasible to create in a virtual simulation a custom implant with congruent custom surgical tooling and to transfer this to a clinical setting. However, further research on multiple levels is needed to explore this novel approach. © 2016 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Internet of People: Opportunities and challenges for engaging stakeholders in watershed planning via the Web

NASA Astrophysics Data System (ADS)

Babbar-Sebens, M.

2016-12-01

Social computing technologies are transforming the way our society interacts and generates content on the Web via collective intelligence. Previously unimagined possibilities have arisen for using these technologies to engage stakeholders and involve them in policy making and planning efforts. While the Internet has been used in the past to support education and communication endeavors, we have developed a novel, web-based, interactive planning tool that engages the community in using science-based methods for the design of potential conservation practices on their landscape, and thereby, reducing undesirable impacts of extreme hydroclimatic events. The tool, Watershed REstoration using Spatio-Temporal Optimization of Resources (WRESTORE), uses a democratic voting process coupled with visualization interfaces, computational simulation and optimization models, and user modeling techniques to support a human-centered design approach. This human-centered design approach, which is reinforced by use of Web 2.0 technologies, has the potential to enable policy makers to connect to a larger community of stakeholders and directly engage them in environmental stewardship efforts. Additionally, the design framework can be used by watershed groups to plug-in their own hydrologic models, climate observations and forecasts, and various other simulation models unique to their watersheds. In this presentation, we will demonstrate the effectiveness of WRESTORE for designing alternatives of conservation practices in a HUC-11 Midwestern watershed, results of various experiments with a diverse set of test users and stakeholders, and discuss potential for future developments.

A methodological approach for designing a usable ontology-based GUI in healthcare.

PubMed

Lasierra, N; Kushniruk, A; Alesanco, A; Borycki, E; García, J

2013-01-01

This paper presents a methodological approach to the design and evaluation of an interface for an ontology-based system used for designing care plans for monitoring patients at home. In order to define the care plans, physicians need a tool for creating instances of the ontology and configuring some rules. Our purpose is to develop an interface to allow clinicians to interact with the ontology. Although ontology-driven applications do not necessarily present the ontology in the user interface, it is our hypothesis that showing selected parts of the ontology in a "usable" way could enhance clinician's understanding and make easier the definition of the care plans. Based on prototyping and iterative testing, this methodology combines visualization techniques and usability methods. Preliminary results obtained after a formative evaluation indicate the effectiveness of suggested combination.

Using Behavioral Science to Design a Peer Comparison Intervention for Postabortion Family Planning in Nepal.

PubMed

Spring, Hannah; Datta, Saugato; Sapkota, Sabitri

2016-01-01

Despite the provision of free and subsidized family planning services and clients' demonstrated intentions to delay pregnancies, family planning uptake among women who receive abortion and postabortion services at Sunaulo Parivar Nepal (SPN), one of Nepal's largest non-governmental sexual and reproductive health (SRH) providers, remains low. Through meetings, interviews, and observations with SPN's stakeholders, service providers, and clients at its 36 SRH centers, we developed hypotheses about client- and provider-side barriers that may inhibit postabortion family planning (PAFP) uptake. On the provider side, we found that the lack of benchmarks (such as the performance of other facilities) against which providers could compare their own performance and the lack of feedback on the performance were important barriers to PAFP uptake. We designed several variants of three interventions to address these barriers. Through conversations with team members at SPN's centralized support office and service providers at SPN centers, we prioritized a peer-comparison tool that allows providers at one center to compare their performance with that of other similar centers. We used feedback from the community of providers on the tools' usability and features to select a variant of the tool that also leverages and reinforces providers' strong intrinsic motivation to provide quality PAFP services. In this paper, we detail the process of identifying barriers and creating an intervention to overcome those barriers. The intervention's effectiveness will be tested with a center-level, stepped-wedge randomized control trial in which SPN's 36 centers will be randomly assigned to receive the intervention at 1-month intervals over a 6-month period. Existing medical record data will be used to monitor family planning uptake.

NJDOT Transportation Data User Survey

DOT National Transportation Integrated Search

2010-02-01

The New Jersey Straight Line Diagrams (SLD) is the main reference for the State's centerline roadway inventory. SLD was initially designed as a planning tool, but it has become a standard information platform for many other purposes within and outsid...

An advance care plan decision support video before major surgery: a patient- and family-centred approach.

PubMed

Isenberg, Sarina R; Crossnohere, Norah L; Patel, Manali I; Conca-Cheng, Alison; Bridges, John F P; Swoboda, Sandy M; Smith, Thomas J; Pawlik, Timothy M; Weiss, Matthew; Volandes, Angelo E; Schuster, Anne; Miller, Judith A; Pastorini, Carolyn; Roter, Debra L; Aslakson, Rebecca A

2018-06-01

Video-based advanc care planning (ACP) tools have been studied in varied medical contexts; however, none have been developed for patients undergoing major surgery. Using a patient- and family-centredness approach, our objective was to implement human-centred design (HCD) to develop an ACP decision support video for patients and their family members when preparing for major surgery. The study investigators partnered with surgical patients and their family members, surgeons and other health professionals to design an ACP decision support video using key HCD principles. Adapting Maguire's HCD stages from computer science to the surgical context, while also incorporating Elwyn et al 's specifications for patient-oriented decision support tool development, we used a six-stage HCD process to develop the video: (1) plan HCD process; (2) specify where video will be used; (3) specify user and organisational requirements; (4) produce and test prototypes; (5) carry out user-based assessment; (6) field test with end users. Over 450 stakeholders were engaged in the development process contributing to setting objectives, applying for funding, providing feedback on the storyboard and iterations of the decision tool video. Throughout the HCD process, stakeholders' opinions were compiled and conflicting approaches negotiated resulting in a tool that addressed stakeholders' concerns. Our patient- and family-centred approach using HCD facilitated discussion and the ability to elicit and balance sometimes competing viewpoints. The early engagement of users and stakeholders throughout the development process may help to ensure tools address the stated needs of these individuals. NCT02489799. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Chapter 2 - An overview of the LANDFIRE Prototype Project

Treesearch

Matthew G. Rollins; Robert E. Keane; Zhiliang Zhu; James P. Menakis

2006-01-01

This chapter describes the background and design of the Landscape Fire and Resource Management Planning Tools Prototype Project, or LANDFIRE Prototype Project, which was a sub-regional, proof-of-concept effort designed to develop methods and applications for providing the high-resolution data (30-m pixel) needed to support wildland fire management and to implement the...

Policy Implications Analysis: A Methodological Advancement for Policy Research and Evaluation.

ERIC Educational Resources Information Center

Madey, Doren L.; Stenner, A. Jackson

Policy Implications Analysis (PIA) is a tool designed to maximize the likelihood that an evaluation report will have an impact on decision-making. PIA was designed to help people planning and conducting evaluations tailor their information so that it has optimal potential for being used and acted upon. This paper describes the development and…

Academic Libraries as High-Tech Gateways: A Guide to Design & Space Decisions. Second Edition.

ERIC Educational Resources Information Center

Bazillion, Richard J.; Braun, Connie L.

This book, based on research about libraries around the country, provides tools that can be used for planning and building an academic library space that streamlines access to information. It explains how to incorporate the latest innovations in academic library facility design; how to make the facility flexible for changing information technology…

Technology Combination Analysis Tool (TCAT) for Active Debris Removal

NASA Astrophysics Data System (ADS)

Chamot, B.; Richard, M.; Salmon, T.; Pisseloup, A.; Cougnet, C.; Axthelm, R.; Saunder, C.; Dupont, C.; Lequette, L.

2013-08-01

This paper present the work of the Swiss Space Center EPFL within the CNES-funded OTV-2 study. In order to find the most performant Active Debris Removal (ADR) mission architectures and technologies, a tool was developed in order to design and compare ADR spacecraft, and to plan ADR campaigns to remove large debris. Two types of architectures are considered to be efficient: the Chaser (single-debris spacecraft), the Mothership/ Kits (multiple-debris spacecraft). Both are able to perform controlled re-entry. The tool includes modules to optimise the launch dates and the order of capture, to design missions and spacecraft, and to select launch vehicles. The propulsion, power and structure subsystems are sized by the tool thanks to high-level parametric models whilst the other ones are defined by their mass and power consumption. Final results are still under investigation by the consortium but two concrete examples of the tool's outputs are presented in the paper.

To connect or not to connect? Modelling the optimal degree of centralisation for wastewater infrastructures.

PubMed

Eggimann, Sven; Truffer, Bernhard; Maurer, Max

2015-11-01

The strong reliance of most utility services on centralised network infrastructures is becoming increasingly challenged by new technological advances in decentralised alternatives. However, not enough effort has been made to develop planning tools designed to address the implications of these new opportunities and to determine the optimal degree of centralisation of these infrastructures. We introduce a planning tool for sustainable network infrastructure planning (SNIP), a two-step techno-economic heuristic modelling approach based on shortest path-finding and hierarchical-agglomerative clustering algorithms to determine the optimal degree of centralisation in the field of wastewater management. This SNIP model optimises the distribution of wastewater treatment plants and the sewer network outlay relative to several cost and sewer-design parameters. Moreover, it allows us to construct alternative optimal wastewater system designs taking into account topography, economies of scale as well as the full size range of wastewater treatment plants. We quantify and confirm that the optimal degree of centralisation decreases with increasing terrain complexity and settlement dispersion while showing that the effect of the latter exceeds that of topography. Case study results for a Swiss community indicate that the calculated optimal degree of centralisation is substantially lower than the current level. Copyright © 2015 Elsevier Ltd. All rights reserved.

Automated radiotherapy treatment plan integrity verification

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yang Deshan; Moore, Kevin L.

2012-03-15

Purpose: In our clinic, physicists spend from 15 to 60 min to verify the physical and dosimetric integrity of radiotherapy plans before presentation to radiation oncology physicians for approval. The purpose of this study was to design and implement a framework to automate as many elements of this quality control (QC) step as possible. Methods: A comprehensive computer application was developed to carry out a majority of these verification tasks in the Philips PINNACLE treatment planning system (TPS). This QC tool functions based on both PINNACLE scripting elements and PERL sub-routines. The core of this technique is the method ofmore » dynamic scripting, which involves a PERL programming module that is flexible and powerful for treatment plan data handling. Run-time plan data are collected, saved into temporary files, and analyzed against standard values and predefined logical rules. The results were summarized in a hypertext markup language (HTML) report that is displayed to the user. Results: This tool has been in clinical use for over a year. The occurrence frequency of technical problems, which would cause delays and suboptimal plans, has been reduced since clinical implementation. Conclusions: In addition to drastically reducing the set of human-driven logical comparisons, this QC tool also accomplished some tasks that are otherwise either quite laborious or impractical for humans to verify, e.g., identifying conflicts amongst IMRT optimization objectives.« less

Integrating automated structured analysis and design with Ada programming support environments

NASA Technical Reports Server (NTRS)

Hecht, Alan; Simmons, Andy

1986-01-01

Ada Programming Support Environments (APSE) include many powerful tools that address the implementation of Ada code. These tools do not address the entire software development process. Structured analysis is a methodology that addresses the creation of complete and accurate system specifications. Structured design takes a specification and derives a plan to decompose the system subcomponents, and provides heuristics to optimize the software design to minimize errors and maintenance. It can also produce the creation of useable modules. Studies have shown that most software errors result from poor system specifications, and that these errors also become more expensive to fix as the development process continues. Structured analysis and design help to uncover error in the early stages of development. The APSE tools help to insure that the code produced is correct, and aid in finding obscure coding errors. However, they do not have the capability to detect errors in specifications or to detect poor designs. An automated system for structured analysis and design TEAMWORK, which can be integrated with an APSE to support software systems development from specification through implementation is described. These tools completement each other to help developers improve quality and productivity, as well as to reduce development and maintenance costs. Complete system documentation and reusable code also resultss from the use of these tools. Integrating an APSE with automated tools for structured analysis and design provide capabilities and advantages beyond those realized with any of these systems used by themselves.

A flexible framework for process-based hydraulic and water ...

EPA Pesticide Factsheets

Background Models that allow for design considerations of green infrastructure (GI) practices to control stormwater runoff and associated contaminants have received considerable attention in recent years. While popular, generally, the GI models are relatively simplistic. However, GI model predictions are being relied upon by many municipalities and State/Local agencies to make decisions about grey vs. green infrastructure improvement planning. Adding complexity to GI modeling frameworks may preclude their use in simpler urban planning situations. Therefore, the goal here was to develop a sophisticated, yet flexible tool that could be used by design engineers and researchers to capture and explore the effect of design factors and properties of the media used in the performance of GI systems at a relatively small scale. We deemed it essential to have a flexible GI modeling tool that is capable of simulating GI system components and specific biophysical processes affecting contaminants such as reactions, and particle-associated transport accurately while maintaining a high degree of flexibly to account for the myriad of GI alternatives. The mathematical framework for a stand-alone GI performance assessment tool has been developed and will be demonstrated.Framework Features The process-based model framework developed here can be used to model a diverse range of GI practices such as green roof, retention pond, bioretention, infiltration trench, permeable pavement and

Obtaining mathematical models for assessing efficiency of dust collectors using integrated system of analysis and data management STATISTICA Design of Experiments

NASA Astrophysics Data System (ADS)

Azarov, A. V.; Zhukova, N. S.; Kozlovtseva, E. Yu; Dobrinsky, D. R.

2018-05-01

The article considers obtaining mathematical models to assess the efficiency of the dust collectors using an integrated system of analysis and data management STATISTICA Design of Experiments. The procedure for obtaining mathematical models and data processing is considered by the example of laboratory studies on a mounted installation containing a dust collector in counter-swirling flows (CSF) using gypsum dust of various fractions. Planning of experimental studies has been carried out in order to reduce the number of experiments and reduce the cost of experimental research. A second-order non-position plan (Box-Bencken plan) was used, which reduced the number of trials from 81 to 27. The order of statistical data research of Box-Benken plan using standard tools of integrated system for analysis and data management STATISTICA Design of Experiments is considered. Results of statistical data processing with significance estimation of coefficients and adequacy of mathematical models are presented.

The ITER bolometer diagnostic: Status and plansa)

NASA Astrophysics Data System (ADS)

Meister, H.; Giannone, L.; Horton, L. D.; Raupp, G.; Zeidner, W.; Grunda, G.; Kalvin, S.; Fischer, U.; Serikov, A.; Stickel, S.; Reichle, R.

2008-10-01

A consortium consisting of four EURATOM Associations has been set up to develop the project plan for the full development of the ITER bolometer diagnostic and to continue urgent R&D activities. An overview of the current status is given, including detector development, line-of-sight optimization, performance analysis as well as the design of the diagnostic components and their integration in ITER. This is complemented by the presentation of plans for future activities required to successfully implement the bolometer diagnostic, ranging from the detector development over diagnostic design and prototype testing to RH tools for calibration.

Urban planning and public health at CDC.

PubMed

Kochtitzky, Chris S; Frumkin, H; Rodriguez, R; Dannenberg, A L; Rayman, J; Rose, K; Gillig, R; Kanter, T

2006-12-22

Urban planning, also called city and regional planning, is a multidisciplinary field in which professionals work to improve the welfare of persons and communities by creating more convenient, equitable, healthful, efficient, and attractive places now and for the future. The centerpiece of urban planning activities is a "master plan," which can take many forms, including comprehensive plans, neighborhood plans, community action plans, regulatory and incentive strategies, economic development plans, and disaster preparedness plans. Traditionally, these plans include assessing and planning for community needs in some or all of the following areas: transportation, housing, commercial/office buildings, natural resource utilization, environmental protection, and health-care infrastructure. Urban planning and public health share common missions and perspectives. Both aim to improve human well-being, emphasize needs assessment and service delivery, manage complex social systems, focus at the population level, and rely on community-based participatory methods. Both fields focus on the needs of vulnerable populations. Throughout their development, both fields have broadened their perspectives. Initially, public health most often used a biomedical model (examining normal/abnormal functioning of the human organism), and urban planning often relied on a geographic model (analysis of human needs or interactions in a spatial context). However, both fields have expanded their tools and perspectives, in part because of the influence of the other. Urban planning and public health have been intertwined for most of their histories. In 1854, British physician John Snow used geographic mapping of an outbreak of cholera in London to identify a public water pump as the outbreak's source. Geographic analysis is a key planning tool shared by urban planning and public health. In the mid-1800s, planners such as Frederick Law Olmsted bridged the gap between the fields by advancing the concept that community design contributes to physical and mental health; serving as President Lincoln's U.S. Sanitary Commission Secretary; and designing hundreds of places, including New York's Central Park. By 1872, the disciplines were so aligned that two of the seven founders of the American Public Health Association were urban designers (an architect and a housing specialist). In 1926, the U.S. Supreme Court, in validating zoning and land-use law as a legal government authority in Village of Euclid v. Ambler Realty, cited the protection of public health as part of its justification. Other connections have included 1) pioneering urbanist Jane Jacobs, who during the 1960s, called for community design that offered safe and convenient options for walking, biking, and impromptu social interaction; and 2) the Healthy Cities movement, which began in Europe and the United States during the 1980s and now includes projects in approximately 1,000 cities that in various ways highlight the role of health as much more than the presence of medical care.

A new DoD initiative: the Computational Research and Engineering Acquisition Tools and Environments (CREATE) program

NASA Astrophysics Data System (ADS)

Arevalo, S.; Atwood, C.; Bell, P.; Blacker, T. D.; Dey, S.; Fisher, D.; Fisher, D. A.; Genalis, P.; Gorski, J.; Harris, A.; Hill, K.; Hurwitz, M.; Kendall, R. P.; Meakin, R. L.; Morton, S.; Moyer, E. T.; Post, D. E.; Strawn, R.; Veldhuizen, D. v.; Votta, L. G.; Wynn, S.; Zelinski, G.

2008-07-01

In FY2008, the U.S. Department of Defense (DoD) initiated the Computational Research and Engineering Acquisition Tools and Environments (CREATE) program, a 360M program with a two-year planning phase and a ten-year execution phase. CREATE will develop and deploy three computational engineering tool sets for DoD acquisition programs to use to design aircraft, ships and radio-frequency antennas. The planning and execution of CREATE are based on the 'lessons learned' from case studies of large-scale computational science and engineering projects. The case studies stress the importance of a stable, close-knit development team; a focus on customer needs and requirements; verification and validation; flexible and agile planning, management, and development processes; risk management; realistic schedules and resource levels; balanced short- and long-term goals and deliverables; and stable, long-term support by the program sponsor. Since it began in FY2008, the CREATE program has built a team and project structure, developed requirements and begun validating them, identified candidate products, established initial connections with the acquisition programs, begun detailed project planning and development, and generated the initial collaboration infrastructure necessary for success by its multi-institutional, multidisciplinary teams.

Development and Calibration of Highway Safety Manual Equations for Florida Conditions

DOT National Transportation Integrated Search

2011-08-31

The Highway Safety Manual (HSM) provides statistically-valid analytical tools and techniques for quantifying the potential effects on crashes as a result of decisions made in planning, design, operations, and maintenance. Implementation of the new te...

Development and calibration of highway safety manual equations for Florida conditions.

DOT National Transportation Integrated Search

2011-08-31

The Highway Safety Manual (HSM) provides statistically-valid analytical tools and techniques for : quantifying the potential effects on crashes as a result of decisions made in planning, design, : operations, and maintenance. Implementation of the ne...

Adding biological realism to assessments of landscape connectivity

EPA Science Inventory

Researchers have long appreciated the practical value of connectivity and source-sink analyses. The importance of these assessments for conservation, planning, and reserve design has motivated many empirical and simulation studies. But there are few modeling tools available that ...

Interactive, open source, travel time scenario modelling: tools to facilitate participation in health service access analysis.

PubMed

Fisher, Rohan; Lassa, Jonatan

2017-04-18

Modelling travel time to services has become a common public health tool for planning service provision but the usefulness of these analyses is constrained by the availability of accurate input data and limitations inherent in the assumptions and parameterisation. This is particularly an issue in the developing world where access to basic data is limited and travel is often complex and multi-modal. Improving the accuracy and relevance in this context requires greater accessibility to, and flexibility in, travel time modelling tools to facilitate the incorporation of local knowledge and the rapid exploration of multiple travel scenarios. The aim of this work was to develop simple open source, adaptable, interactive travel time modelling tools to allow greater access to and participation in service access analysis. Described are three interconnected applications designed to reduce some of the barriers to the more wide-spread use of GIS analysis of service access and allow for complex spatial and temporal variations in service availability. These applications are an open source GIS tool-kit and two geo-simulation models. The development of these tools was guided by health service issues from a developing world context but they present a general approach to enabling greater access to and flexibility in health access modelling. The tools demonstrate a method that substantially simplifies the process for conducting travel time assessments and demonstrate a dynamic, interactive approach in an open source GIS format. In addition this paper provides examples from empirical experience where these tools have informed better policy and planning. Travel and health service access is complex and cannot be reduced to a few static modeled outputs. The approaches described in this paper use a unique set of tools to explore this complexity, promote discussion and build understanding with the goal of producing better planning outcomes. The accessible, flexible, interactive and responsive nature of the applications described has the potential to allow complex environmental social and political considerations to be incorporated and visualised. Through supporting evidence-based planning the innovative modelling practices described have the potential to help local health and emergency response planning in the developing world.

CASE tools and UML: state of the ART.

PubMed

Agarwal, S

2001-05-01

With increasing need for automated tools to assist complex systems development, software design methods are becoming popular. This article analyzes the state of art in computer-aided software engineering (CASE) tools and unified modeling language (UML), focusing on their evolution, merits, and industry usage. It identifies managerial issues for the tools' adoption and recommends an action plan to select and implement them. While CASE and UML offer inherent advantages like cheaper, shorter, and efficient development cycles, they suffer from poor user satisfaction. The critical success factors for their implementation include, among others, management and staff commitment, proper corporate infrastructure, and user training.

78 FR 15086 - Self-Regulatory Organizations; The NASDAQ Stock Market LLC; Notice of Filing and Immediate...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-08

... Locator is accessed through the NASDAQ Workstation or Weblink ACT 2.0 and is offered for a fee of $750 per... Locator is an add on tool to the NASDAQ Workstation and Weblink ACT 2.0 that assists a member firm that is... Volatility (the ``Plan'').\\3\\ The Plan provides a limit up/limit down mechanism designed to prevent trades in...

Outfit Planning

DTIC Science & Technology

1979-12-01

ETC.ronments where, in most cases, it is difficult or time consum - ing to get tools and materials. The natural result is more lost-time accidents, increased...is already on-hand and the time consuming vendor-drawing approval cycle is eliminated from the pro- curement process. The flow of design information...SYSTEM/STAGE TO SPECIFICATION BY MATERIA !L/DELIVERY DATE - TO PLAN MATERIAL PROCUREMENT ON SCHEOULE - TO MINIMIZE ST0CKED MATERIAL MATERIAL CONTROL

TRACON Aircraft Arrival Planning and Optimization Through Spatial Constraint Satisfaction

NASA Technical Reports Server (NTRS)

Bergh, Christopher P.; Krzeczowski, Kenneth J.; Davis, Thomas J.; Denery, Dallas G. (Technical Monitor)

1995-01-01

A new aircraft arrival planning and optimization algorithm has been incorporated into the Final Approach Spacing Tool (FAST) in the Center-TRACON Automation System (CTAS) developed at NASA-Ames Research Center. FAST simulations have been conducted over three years involving full-proficiency, level five air traffic controllers from around the United States. From these simulations an algorithm, called Spatial Constraint Satisfaction, has been designed, coded, undergone testing, and soon will begin field evaluation at the Dallas-Fort Worth and Denver International airport facilities. The purpose of this new design is an attempt to show that the generation of efficient and conflict free aircraft arrival plans at the runway does not guarantee an operationally acceptable arrival plan upstream from the runway -information encompassing the entire arrival airspace must be used in order to create an acceptable aircraft arrival plan. This new design includes functions available previously but additionally includes necessary representations of controller preferences and workload, operationally required amounts of extra separation, and integrates aircraft conflict resolution. As a result, the Spatial Constraint Satisfaction algorithm produces an optimized aircraft arrival plan that is more acceptable in terms of arrival procedures and air traffic controller workload. This paper discusses the current Air Traffic Control arrival planning procedures, previous work in this field, the design of the Spatial Constraint Satisfaction algorithm, and the results of recent evaluations of the algorithm.

Models, Strategies, and Tools: Theory in Implementing Evidence-Based Findings into Health Care Practice

PubMed Central

Sales, Anne; Smith, Jeffrey; Curran, Geoffrey; Kochevar, Laura

2006-01-01

This paper presents a case for careful consideration of theory in planning to implement evidence-based practices into clinical care. As described, theory should be tightly linked to strategic planning through careful choice or creation of an implementation framework. Strategies should be linked to specific interventions and/or intervention components to be implemented, and the choice of tools should match the interventions and overall strategy, linking back to the original theory and framework. The thesis advanced is that in most studies where there is an attempt to implement planned change in clinical processes, theory is used loosely. An example of linking theory to intervention design is presented from a Mental Health Quality Enhancement Research Initiative effort to increase appropriate use of antipsychotic medication among patients with schizophrenia in the Veterans Health Administration. PMID:16637960

Models, strategies, and tools. Theory in implementing evidence-based findings into health care practice.

PubMed

Sales, Anne; Smith, Jeffrey; Curran, Geoffrey; Kochevar, Laura

2006-02-01

This paper presents a case for careful consideration of theory in planning to implement evidence-based practices into clinical care. As described, theory should be tightly linked to strategic planning through careful choice or creation of an implementation framework. Strategies should be linked to specific interventions and/or intervention components to be implemented, and the choice of tools should match the interventions and overall strategy, linking back to the original theory and framework. The thesis advanced is that in most studies where there is an attempt to implement planned change in clinical processes, theory is used loosely. An example of linking theory to intervention design is presented from a Mental Health Quality Enhancement Research Initiative effort to increase appropriate use of antipsychotic medication among patients with schizophrenia in the Veterans Health Administration.

A Tale of Two Regions: Landscape Ecological Planning for Shale Gas Energy Futures

NASA Astrophysics Data System (ADS)

Murtha, T., Jr.; Schroth, O.; Orland, B.; Goldberg, L.; Mazurczyk, T.

2015-12-01

As we increasingly embrace deep shale gas deposits to meet global energy demands new and dispersed local and regional policy and planning challenges emerge. Even in regions with long histories of energy extraction, such as coal, shale gas and the infrastructure needed to produce the gas and transport it to market offers uniquely complex transformations in land use and landcover not previously experienced. These transformations are fast paced, dispersed and can overwhelm local and regional planning and regulatory processes. Coupled to these transformations is a structural confounding factor. While extraction and testing are carried out locally, regulation and decision-making is multilayered, often influenced by national and international factors. Using a geodesign framework, this paper applies a set of geospatial landscape ecological planning tools in two shale gas settings. First, we describe and detail a series of ongoing studies and tools that we have developed for communities in the Marcellus Shale region of the eastern United States, specifically the northern tier of Pennsylvania. Second, we apply a subset of these tools to potential gas development areas of the Fylde region in Lancashire, United Kingdom. For the past five years we have tested, applied and refined a set of place based and data driven geospatial models for forecasting, envisioning, analyzing and evaluating shale gas activities in northern Pennsylvania. These models are continuously compared to important landscape ecological planning challenges and priorities in the region, e.g. visual and cultural resource preservation. Adapting and applying these tools to a different landscape allow us to not only isolate and define important regulatory and policy exigencies in each specific setting, but also to develop and refine these models for broader application. As we continue to explore increasingly complex energy solutions globally, we need an equally complex comparative set of landscape ecological planning tools to inform policy, design and regional planning. Adapting tools and techniques developed in Pennsylvania where shale gas extraction is ongoing to Lancashire, where industry is still in the exploratory phase offers a key opportunity to test and refine more generalizable models.

TAE Plus: Transportable Applications Environment Plus tools for building graphic-oriented applications

NASA Technical Reports Server (NTRS)

Szczur, Martha R.

1989-01-01

The Transportable Applications Environment Plus (TAE Plus), developed by NASA's Goddard Space Flight Center, is a portable User Interface Management System (UIMS), which provides an intuitive WYSIWYG WorkBench for prototyping and designing an application's user interface, integrated with tools for efficiently implementing the designed user interface and effective management of the user interface during an application's active domain. During the development of TAE Plus, many design and implementation decisions were based on the state-of-the-art within graphics workstations, windowing system and object-oriented programming languages. Some of the problems and issues experienced during implementation are discussed. A description of the next development steps planned for TAE Plus is also given.

A Computerized Family Planning Counseling Aid: A Pilot Study Evaluation of Smart Choices.

PubMed

Koo, Helen P; Wilson, Ellen K; Minnis, Alexandra M

2017-03-01

Resource constraints may make it challenging for family planning clinics to provide comprehensive contraceptive counseling; technological tools that help providers follow recommended practices without straining resources merit evaluation. A pilot study using a two-group, posttest-only experimental design evaluated Smart Choices, a computer-based tool designed to help providers offer more patient-centered counseling and enable patients to participate proactively in the counseling session. In two North Carolina family planning clinics, 214 women received usual counseling in March-May 2013, and 126 women used Smart Choices in May-July 2013. Exit interviews provided data for the evaluation. Multivariate Poisson and multinomial logistic regression analyses were performed to examine group differences in counseling outcomes. Three of 12 hypotheses tested were supported: Compared with controls, women in the intervention group knew more contraceptive methods (adjusted mean, 11.1 vs. 10.7); discussed more topics related to sexual health during counseling (1.2 vs. 0.9 among those reporting any discussion); and rated counseling as more patient-centered, an indication of how well they felt providers understood their family planning circumstances and ideas (3.9 vs. 3.7 on a scale of 1-4). Contrary to another hypothesis, controls were more likely than women in the intervention group to choose IUDs and implants. Computerized counseling aids like Smart Choices are in an early stage of development. Future research is warranted to develop tools that lead to more productive and individualized clinic visits and, ultimately, to more effective contraceptive use and reduced levels of unintended pregnancy. Copyright © 2017 by the Guttmacher Institute.

Using a Service Planning Approach to Improve the Impact of Earth Observations in the Developing World

NASA Astrophysics Data System (ADS)

Irwin, D.; Frankel-Reed, J.

2017-12-01

SERVIR is joint development initiative of the National Aeronautics and Space Administration (NASA) and the United States Agency for International Development (USAID), working in partnership with leading regional organizations around the world to help developing countries use information provided by Earth observing satellites and geospatial technologies to empower decision-makers with tools, products, and services to better address critical issues related to food security, water resources, natural disasters, and land use. Since its launch in 2005, SERVIR has grown into a global network of four active hubs that are improving awareness, increasing access to information, and supporting analysis to help people in Africa, Hindu Kush Himalaya, and the Lower Mekong regions better manage today's complex environmental challenges. To help improve the impact of SERVIR activities throughout the global network, a Service Planning Approach was developed with three main steps that involve: 1) consultation and needs assessment, 2) service design and 3) service delivery. To successfully accomplish these steps, SERVIR has created a series of capacity building tools that focus on specific activities to better engage stakeholders, design a more successful service, and to conduct end-to-end monitoring, evaluation, and learning. Currently, all four SERVIR hubs in different regions of the world are implementing this Service Planning Approach and helping to improve it by providing feedback based on their implementation. This presentation will describe the SERVIR Service Planning Approach and discuss the various tools, which ultimately can empower remote sensing scientists and application developers to obtain a greater impact from the Earth Observation products they develop.

CWA 15793 2011 Planning and Implementation Tool

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gross, Alan; Nail, George

This software, built on an open source platform called Electron (runs on Chromium and Node.js), is designed to assist organizations in the implementation of a biorisk management system consistent with the requirements of the international, publicly available guidance document CEN Workshop Agreement 15793:2011 (CWA 15793). The software includes tools for conducting organizational gap analysis against CWA 15793 requirements, planning tools to support the implementation of CWA 15793 requirements, and performance monitoring support. The gap analysis questions are based on the text of CWA 15793, and its associated guidance document, CEN Workshop Agreement 16393:2012. The authors have secured permission from themore » publisher of CWA 15793, the European Committee for Standardization (CEN), to use language from the document in the software, with the understanding that the software will be made available freely, without charge.« less

Oncentra brachytherapy planning system.

PubMed

Yang, Jack

2018-03-27

In modern cancer management, treatment planning has progressed as a contemporary tool with all the advances in computing power in recent years. One of the advanced planning tools uses 3-dimensional (3D) data sets for accurate dose distributions in patient prescription. Among these planning processes, brachytherapy has been a very important part of a successful cancer management program, offering clinical benefits with specific or combined treatments with external beam therapy. In this chapter, we mainly discussed the Elekta Oncentra planning system, which is the main treatment planning tool for high-dose rate (HDR) modality in our facility and in many other facilities in the United States. HDR is a technically advanced form of brachytherapy; a high-intensity radiation source (3.6 mm in length) is delivered with step motor in submillimeter precision under computer guidance directly into the tumor areas while minimizing injury to surrounding normal healthy tissue. Oncentra planning is the key component to generate a deliverable brachytherapy procedure, which is executed on the microSelectron V3 remote afterloader treatment system. Creating a highly conformal plan can be a time-consuming task. The development of Oncentra software (version 4.5.3) offers a variety of useful tools that facilitate many of the clinical challenging tasks for planning, such as contouring and image reconstruction, as well as rapid planning calculations with dose and dose volume histogram analysis. Oncentra Brachy module creates workflow and optimizes the planning accuracy for wide varieties of clinical HDR treatments, such as skin, gynecologic (GYN), breast, prostate, and many other applications. The treatment file can also be transferred to the afterloader control station for speedy delivery. The design concept, calculation algorithms, and optimization modules presented some key characteristics to plan and treat the patients effectively and accurately. The dose distribution and accuracy of several clinical sample cases were discussed to illustrate the effectiveness and clinical efficacy. The American Association of Physicists in Medicine brachytherapy reports of TG-43 and TG-186 were also described and compared in evaluations of fundamental calculation methodologies. Copyright © 2018 American Association of Medical Dosimetrists. Published by Elsevier Inc. All rights reserved.

Defense Facility Condition: Revised Guidance Needed to Improve Oversight of Assessments and Ratings

DTIC Science & Technology

2016-06-01

are to implement the standardized process in part by assessing the condition of buildings, pavement , and rail using the same set of software tools...facility to current standards; costs for labor, equipment, materials, and currency exchange rates overseas; costs for project planning and design ...example, the services are to assess the condition of buildings, pavement , and rail using Sustainment Management System software tools developed by the

Engaging stakeholders to design a comparative effectiveness trial in children with uncontrolled asthma

PubMed Central

Erwin, Kim; Martin, Molly A; Flippin, Tara; Norell, Sarah; Shadlyn, Ariana; Yang, Jie; Falco, Paula; Rivera, Jaime; Ignoffo, Stacy; Kumar, Rajesh; Margellos-Anast, Helen; McDermott, Michael; McMahon, Kate; Mosnaim, Giselle; Nyenhuis, Sharmilee M; Press, Valerie G; Ramsay, Jessica E; Soyemi, Kenneth; Thompson, Trevonne M; Krishnan, Jerry A

2016-01-01

Aim: To present the methods and outcomes of stakeholder engagement in the development of interventions for children presenting to the emergency department (ED) for uncontrolled asthma. Methods: We engaged stakeholders (caregivers, physicians, nurses, administrators) from six EDs in a three-phase process to: define design requirements; prototype and refine; and evaluate. Results: Interviews among 28 stakeholders yielded themes regarding in-home asthma management practices and ED discharge experiences. Quantitative and qualitative evaluation showed strong preference for the new discharge tool over current tools. Conclusion: Engaging end-users in contextual inquiry resulted in CAPE (CHICAGO Action Plan after ED discharge), a new stakeholder-balanced discharge tool, which is being tested in a multicenter comparative effectiveness trial. PMID:26690579

Translating Vision into Design: A Method for Conceptual Design Development

NASA Technical Reports Server (NTRS)

Carpenter, Joyce E.

2003-01-01

One of the most challenging tasks for engineers is the definition of design solutions that will satisfy high-level strategic visions and objectives. Even more challenging is the need to demonstrate how a particular design solution supports the high-level vision. This paper describes a process and set of system engineering tools that have been used at the Johnson Space Center to analyze and decompose high-level objectives for future human missions into design requirements that can be used to develop alternative concepts for vehicles, habitats, and other systems. Analysis and design studies of alternative concepts and approaches are used to develop recommendations for strategic investments in research and technology that support the NASA Integrated Space Plan. In addition to a description of system engineering tools, this paper includes a discussion of collaborative design practices for human exploration mission architecture studies used at the Johnson Space Center.

The Future of Additive Manufacturing in Air Force Acquisition

DTIC Science & Technology

2017-03-22

manufacturing data - Designing and deploying a virtual aircraft fleet for future conflict - Space-based satellite production for defense capabilities via...changing system design via lower production costs, enhanced performance possibilities, and rapid replenishment. In the Technology Maturation and Risk... manufacturing as well as major cost savings via reduction of required materials, unique tooling, specialized production plans, and segments of the

A Design that Teaches Others. Learning by Design: Part I

ERIC Educational Resources Information Center

Theimer, James E.

2009-01-01

Educating our children about our planet is a good idea, but if seeing is believing, then maybe we should consider that the next generation of school buildings such as the Redding School of the Arts can serve as potent educational tools for our teachers to utilize in their lesson plans on how to preserve our planet. Buildings are too rarely…

Strategic Investment Plan Fiscal Year 1993.

DTIC Science & Technology

1993-09-01

Groundwater ........................ 283 Heavy Metals in Soils, Sludges, Sediments and Water .................... 321 Energetics in Soils and Groundwater...technologies and tools to achieve a design for reconfiguring existing PEP production facilities into agile factories which will reduce total life cycle wastes...facilities. When use of existing facilities is not practical, a special demonstration testbed may be built. The factory design will then be developed

Comparative Investigation on Tool Wear during End Milling of AISI H13 Steel with Different Tool Path Strategies

NASA Astrophysics Data System (ADS)

Adesta, Erry Yulian T.; Riza, Muhammad; Avicena

2018-03-01

Tool wear prediction plays a significant role in machining industry for proper planning and control machining parameters and optimization of cutting conditions. This paper aims to investigate the effect of tool path strategies that are contour-in and zigzag tool path strategies applied on tool wear during pocket milling process. The experiments were carried out on CNC vertical machining centre by involving PVD coated carbide inserts. Cutting speed, feed rate and depth of cut were set to vary. In an experiment with three factors at three levels, Response Surface Method (RSM) design of experiment with a standard called Central Composite Design (CCD) was employed. Results obtained indicate that tool wear increases significantly at higher range of feed per tooth compared to cutting speed and depth of cut. This result of this experimental work is then proven statistically by developing empirical model. The prediction model for the response variable of tool wear for contour-in strategy developed in this research shows a good agreement with experimental work.

Federal and tribal lands road safety audits : case studies

DOT National Transportation Integrated Search

2009-12-01

A road safety audit (RSA) is a formal safety performance examination by an independent, multidisciplinary team. RSAs are an effective tool for proactively improving the safety performance of a road project during the planning and design stages, and f...

Review of Collaborative Tools for Planning and Engineering

DTIC Science & Technology

2007-10-01

including PDAs) and Operating Systems 1 In general, should support laptops, desktops, Windows OS, Mac OS, Palm OS, Windows CE, Blackberry , Sun...better), voting (to establish operating parameters), reactor design, wind tunnel simulation Display same material on every computer, synchronisation

Resources in Technology III.

ERIC Educational Resources Information Center

Ritz, John M.; And Others

This document--intended to help technology education teachers plan their classroom curriculum for secondary school and college students--contains units on exploring high-impact technology, microcomputers as technological tools, integrated manufacturing systems (the future of design and production), the role of robotics in integrated manufacturing…

Modeling and analysis of power processing systems: Feasibility investigation and formulation of a methodology

NASA Technical Reports Server (NTRS)

Biess, J. J.; Yu, Y.; Middlebrook, R. D.; Schoenfeld, A. D.

1974-01-01

A review is given of future power processing systems planned for the next 20 years, and the state-of-the-art of power processing design modeling and analysis techniques used to optimize power processing systems. A methodology of modeling and analysis of power processing equipment and systems has been formulated to fulfill future tradeoff studies and optimization requirements. Computer techniques were applied to simulate power processor performance and to optimize the design of power processing equipment. A program plan to systematically develop and apply the tools for power processing systems modeling and analysis is presented so that meaningful results can be obtained each year to aid the power processing system engineer and power processing equipment circuit designers in their conceptual and detail design and analysis tasks.

The Consolidated Planning and Scheduling System for Space Transportation and Space Station operations - Successful development experience

NASA Technical Reports Server (NTRS)

Hornstein, Rhoda S.; Willoughby, John K.; Gardner, Jo A.; Shinkle, Gerald L.

1993-01-01

In 1992, NASA made the decision to evolve a Consolidated Planning System (CPS) by adding the Space Transportation System (STS) requirements to the Space Station Freedom (SSF) planning software. This paper describes this evolutionary process, which began with a series of six-month design-build-test cycles, using a domain-independent architecture and a set of developmental tools known as the Advanced Scheduling Environment. It is shown that, during these tests, the CPS could be used at multiple organizational levels of planning and for integrating schedules from geographically distributed (including international) planning environments. The potential for using the CPS for other planning and scheduling tasks in the SSF program is being currently examined.

Design and evaluation of a web-based decision support tool for district-level disease surveillance in a low-resource setting

PubMed Central

Pore, Meenal; Sengeh, David M.; Mugambi, Purity; Purswani, Nuri V.; Sesay, Tom; Arnold, Anna Lena; Tran, Anh-Minh A.; Myers, Ralph

2017-01-01

During the 2014 West African Ebola Virus outbreak it became apparent that the initial response to the outbreak was hampered by limitations in the collection, aggregation, analysis and use of data for intervention planning. As part of the post-Ebola recovery phase, IBM Research Africa partnered with the Port Loko District Health Management Team (DHMT) in Sierra Leone and GOAL Global, to design, implement and deploy a web-based decision support tool for district-level disease surveillance. This paper discusses the design process and the functionality of the first version of the system. The paper presents evaluation results prior to a pilot deployment and identifies features for future iterations. A qualitative assessment of the tool prior to pilot deployment indicates that it improves the timeliness and ease of using data for making decisions at the DHMT level. PMID:29854209

Designer's unified cost model

NASA Technical Reports Server (NTRS)

Freeman, William T.; Ilcewicz, L. B.; Swanson, G. D.; Gutowski, T.

1992-01-01

A conceptual and preliminary designers' cost prediction model has been initiated. The model will provide a technically sound method for evaluating the relative cost of different composite structural designs, fabrication processes, and assembly methods that can be compared to equivalent metallic parts or assemblies. The feasibility of developing cost prediction software in a modular form for interfacing with state of the art preliminary design tools and computer aided design programs is being evaluated. The goal of this task is to establish theoretical cost functions that relate geometric design features to summed material cost and labor content in terms of process mechanics and physics. The output of the designers' present analytical tools will be input for the designers' cost prediction model to provide the designer with a data base and deterministic cost methodology that allows one to trade and synthesize designs with both cost and weight as objective functions for optimization. The approach, goals, plans, and progress is presented for development of COSTADE (Cost Optimization Software for Transport Aircraft Design Evaluation).

Structured Analysis of the Logistic Support Analysis (LSA) Task, ’Integrated Logistic Support (ILS) Assessment Maintenance Planning E-1 Element’ (APJ 966-204)

DTIC Science & Technology

1988-10-01

Structured Analysis involves building a logical (non-physical) model of a system, using graphic techniques which enable users, analysts, and designers to... Design uses tools, especially graphic ones, to render systems readily understandable. 8 Ř. Structured Design offers a set of strategies for...in the overall systems design process, and an overview of the assessment procedures, as well as a guide to the overall assessment. 20. DISTRIBUTION

For Third Enrollment Period, Marketplaces Expand Decision Support Tools To Assist Consumers.

PubMed

Wong, Charlene A; Polsky, Daniel E; Jones, Arthur T; Weiner, Janet; Town, Robert J; Baker, Tom

2016-04-01

The design of the Affordable Care Act's online health insurance Marketplaces can improve how consumers make complex health plan choices. We examined the choice environment on the state-based Marketplaces and HealthCare.gov in the third open enrollment period. Compared to previous enrollment periods, we found greater adoption of some decision support tools, such as total cost estimators and integrated provider lookups. Total cost estimators differed in how they generated estimates: In some Marketplaces, consumers categorized their own utilization, while in others, consumers answered detailed questions and were assigned a utilization profile. The tools available before creating an account (in the window-shopping period) and afterward (in the real-shopping period) differed in several Marketplaces. For example, five Marketplaces provided total cost estimators to window shoppers, but only two provided them to real shoppers. Further research is needed on the impact of different choice environments and on which tools are most effective in helping consumers pick optimal plans. Project HOPE—The People-to-People Health Foundation, Inc.

Human Factors Engineering Program Review Model (NUREG-0711)Revision 3: Update Methodology and Key Revisions

DOE Office of Scientific and Technical Information (OSTI.GOV)

OHara J. M.; Higgins, J.; Fleger, S.

The U.S. Nuclear Regulatory Commission (NRC) reviews the human factors engineering (HFE) programs of applicants for nuclear power plant construction permits, operating licenses, standard design certifications, and combined operating licenses. The purpose of these safety reviews is to help ensure that personnel performance and reliability are appropriately supported. Detailed design review procedures and guidance for the evaluations is provided in three key documents: the Standard Review Plan (NUREG-0800), the HFE Program Review Model (NUREG-0711), and the Human-System Interface Design Review Guidelines (NUREG-0700). These documents were last revised in 2007, 2004 and 2002, respectively. The NRC is committed to the periodicmore » update and improvement of the guidance to ensure that it remains a state-of-the-art design evaluation tool. To this end, the NRC is updating its guidance to stay current with recent research on human performance, advances in HFE methods and tools, and new technology being employed in plant and control room design. NUREG-0711 is the first document to be addressed. We present the methodology used to update NUREG-0711 and summarize the main changes made. Finally, we discuss the current status of the update program and the future plans.« less

Detailed Design Documentation, without the Pain

NASA Astrophysics Data System (ADS)

Ramsay, C. D.; Parkes, S.

2004-06-01

Producing detailed forms of design documentation, such as pseudocode and structured flowcharts, to describe the procedures of a software system:(1) allows software developers to model and discuss their understanding of a problem and the design of a solution free from the syntax of a programming language,(2) facilitates deeper involvement of non-technical stakeholders, such as the customer or project managers, whose influence ensures the quality, correctness and timeliness of the resulting system,(3) forms comprehensive documentation of the system for its future maintenance, reuse and/or redeployment.However, such forms of documentation require effort to create and maintain.This paper describes a software tool which is currently being developed within the Space Systems Research Group at the University of Dundee which aims to improve the utility of, and the incentive for, creating detailed design documentation for the procedures of a software system. The rationale for creating such a tool is briefly discussed, followed by a description of the tool itself, a summary of its perceived benefits, and plans for future work.

The service blueprint as a tool for designing innovative pharmaceutical services.

PubMed

Holdford, D A; Kennedy, D T

1999-01-01

To describe service blueprints, discuss their need and design, and provide examples of their use in advancing pharmaceutical care. Service blueprints are pictures or maps of service processes that permit the people involved in designing, providing, managing, and using the service to better understand them and deal with them objectively. A service blueprint simultaneously depicts the service process and the roles of consumers, service providers, and supporting services. Service blueprints can be useful in pharmacy because many of the obstacles to pharmaceutical care are a result of insufficient planning by service designers and/or poor communication between those designing services and those implementing them. One consequence of this poor design and communication is that many consumers and third party payers are uninformed about pharmacist roles. Service blueprints can be used by pharmacists to promote the value of pharmaceutical care to consumers and other decision makers. They can also assist in designing better pharmaceutical services. Blueprints are designed by identifying and mapping a process from the consumer's point of view, mapping employee actions and support activities, and adding visible evidence of service at each consumer action step. Key components of service blueprints are consumer actions, "onstage" and "backstage" employee actions, and support processes. Blueprints can help pharmacy managers identify and correct problems with the service process, provide pharmacy employees an opportunity to offer feedback in the planning stages of services, and demonstrate the value of pharmaceutical services to consumers. Service blueprints can be a valuable tool for designing, implementing, and evaluating pharmacy services.

Estimating the Reliability of Electronic Parts in High Radiation Fields

NASA Technical Reports Server (NTRS)

Everline, Chester; Clark, Karla; Man, Guy; Rasmussen, Robert; Johnston, Allan; Kohlhase, Charles; Paulos, Todd

2008-01-01

Radiation effects on materials and electronic parts constrain the lifetime of flight systems visiting Europa. Understanding mission lifetime limits is critical to the design and planning of such a mission. Therefore, the operational aspects of radiation dose are a mission success issue. To predict and manage mission lifetime in a high radiation environment, system engineers need capable tools to trade radiation design choices against system design and reliability, and science achievements. Conventional tools and approaches provided past missions with conservative designs without the ability to predict their lifetime beyond the baseline mission.This paper describes a more systematic approach to understanding spacecraft design margin, allowing better prediction of spacecraft lifetime. This is possible because of newly available electronic parts radiation effects statistics and an enhanced spacecraft system reliability methodology. This new approach can be used in conjunction with traditional approaches for mission design. This paper describes the fundamentals of the new methodology.

Local Government Planning Tool to Calculate Institutional and Engineering Control Costs for Brownfield Properties

EPA Pesticide Factsheets

This cost calculator is designed as a guide for municipal or local governments to assist in calculating their expected costs of implementing and conducting long-term stewardship of institutional controls and engineering controls at brownfield properties.

Development of a Tool for Documenting, Tracking, Recording, and Analyzing Improvements to Intersection Sites and Roadway Departures in Curve Locations : Research Project Capsule

DOT National Transportation Integrated Search

2012-09-01

Intermodal transportation : system planning, design, : improvement, performance : evaluation, or economic : assessments include safety : improvements because they : lower the overall cost of : transportation. State Departments of Transportation (DOTs...

Storm Water Management Model (SWMM): Performance Review and Gap Analysis

EPA Science Inventory

The Storm Water Management Model (SWMM) is a widely used tool for urban drainage design and planning. Hundreds of peer-reviewed articles and conference proceedings have been written describing applications of SWMM. This review focused on collecting information on model performanc...

AI in manufacturing

NASA Astrophysics Data System (ADS)

Gross, John E.; Minato, Rick; Smith, David M.; Loftin, R. B.; Savely, Robert T.

1991-10-01

AI techniques are shown to have been useful in such aerospace industry tasks as vehicle configuration layouts, process planning, tool design, numerically-controlled programming of tools, production scheduling, and equipment testing and diagnosis. Accounts are given of illustrative experiences at the production facilities of three major aerospace defense contractors. Also discussed is NASA's autonomous Intelligent Computer-Aided Training System, for such ambitious manned programs as Space Station Freedom, which employs five different modules to constitute its job-independent training architecture.

Strategic workforce planning for a multihospital, integrated delivery system.

PubMed

Datz, David; Hallberg, Colleen; Harris, Kathy; Harrison, Lisa; Samples, Patience

2012-01-01

Banner Health has long recognized the need to anticipate, beyond the immediate operational realities or even the annual budgeting projection exercises, the necessary workforce needs of the future. Thus, in 2011, Banner implemented a workforce planning model that included structures, processes, and tools for predicting workforce needs, with particular focus on identified critical systemwide practice areas. The model represents the incorporation of labor management tools and processes with more strategic, broad-view, long-term assessment and planning mechanisms. The sequential tying of the workforce planning lifecycle with the organization's strategy and financial planning process supports alignment of goals, objectives, and resource allocation. Collaboration among strategy, finance, human resources, and operations has provided us with the ability to identify critical position groups based on 3-year strategic priorities. By engaging leaders from across the organization, focusing on activities at facility, regional, and system levels, and building in mechanisms for accountability, we are now engaged in continuous evaluations of our delivery models, the competencies and preparations necessary for the staff to effectively function within those delivery models, and developing and implementing action plans designed to ensure adequate numbers of the staff whose competencies will be suited to the work expected of them.

Virtual surgery in a (tele-)radiology framework.

PubMed

Glombitza, G; Evers, H; Hassfeld, S; Engelmann, U; Meinzer, H P

1999-09-01

This paper presents telemedicine as an extension of a teleradiology framework through tools for virtual surgery. To classify the described methods and applications, the research field of virtual reality (VR) is broadly reviewed. Differences with respect to technical equipment, methodological requirements and areas of application are pointed out. Desktop VR, augmented reality, and virtual reality are differentiated and discussed in some typical contexts of diagnostic support, surgical planning, therapeutic procedures, simulation and training. Visualization techniques are compared as a prerequisite for virtual reality and assigned to distinct levels of immersion. The advantage of a hybrid visualization kernel is emphasized with respect to the desktop VR applications that are subsequently shown. Moreover, software design aspects are considered by outlining functional openness in the architecture of the host system. Here, a teleradiology workstation was extended by dedicated tools for surgical planning through a plug-in mechanism. Examples of recent areas of application are introduced such as liver tumor resection planning, diagnostic support in heart surgery, and craniofacial surgery planning. In the future, surgical planning systems will become more important. They will benefit from improvements in image acquisition and communication, new image processing approaches, and techniques for data presentation. This will facilitate preoperative planning and intraoperative applications.

Efficient Digital Implementation of The Sigmoidal Function For Artificial Neural Network

NASA Astrophysics Data System (ADS)

Pratap, Rana; Subadra, M.

2011-10-01

An efficient piecewise linear approximation of a nonlinear function (PLAN) is proposed. This uses simulink environment design to perform a direct transformation from X to Y, where X is the input and Y is the approximated sigmoidal output. This PLAN is then used within the outputs of an artificial neural network to perform the nonlinear approximation. In This paper, is proposed a method to implement in FPGA (Field Programmable Gate Array) circuits different approximation of the sigmoid function.. The major benefit of the proposed method resides in the possibility to design neural networks by means of predefined block systems created in System Generator environment and the possibility to create a higher level design tools used to implement neural networks in logical circuits.

Future states: the axioms underlying prospective, future-oriented, health planning instruments.

PubMed

Koch, T

2001-02-01

Proscriptive planning exercises are critical to and generally accepted as integral to health planning at varying scales. These require specific instruments designed to predict future actions on the basis of present knowledge. At the macro-level of health economics, for example, a number of future-oriented Quality of Life Instruments (QL) are commonly employed. At the level of individual decision making, on the other hand, Advance Directives (AD's) are advanced as a means by which healthy individuals can assure their wishes will be carried out if at some future point they are incapacitated. As proscriptive tools, both instrument classes appear to share an axiomatic set whose individual parts have not been rigorously considered. This paper attempts to first identify and then consider a set of five axioms underlying future oriented health planning instruments. These axioms are then critiqued using data from a pre-test survey designed specifically to address their assumptions. Results appear to challenge the validity of the axioms underlying the proscriptive planning instruments.

Task-level control for autonomous robots

NASA Technical Reports Server (NTRS)

Simmons, Reid

1994-01-01

Task-level control refers to the integration and coordination of planning, perception, and real-time control to achieve given high-level goals. Autonomous mobile robots need task-level control to effectively achieve complex tasks in uncertain, dynamic environments. This paper describes the Task Control Architecture (TCA), an implemented system that provides commonly needed constructs for task-level control. Facilities provided by TCA include distributed communication, task decomposition and sequencing, resource management, monitoring and exception handling. TCA supports a design methodology in which robot systems are developed incrementally, starting first with deliberative plans that work in nominal situations, and then layering them with reactive behaviors that monitor plan execution and handle exceptions. To further support this approach, design and analysis tools are under development to provide ways of graphically viewing the system and validating its behavior.

A procedural model for planning and evaluating behavioral interventions.

PubMed

Hyner, G C

2005-01-01

A model for planning, implementing and evaluating health behavior change strategies is proposed. Variables are presented which can be used in the model or serve as examples for how the model is utilized once a theory of health behavior is adopted. Examples of three innovative strategies designed to influence behavior change are presented so that the proposed model can be modified for use following comprehensive screening and baseline measurements. Three measurement priorities: clients, methods and agency are subjected to three phases of assessment: goals, implementation and effects. Lifestyles account for the majority of variability in quality-of-life and premature morbidity and mortality. Interventions designed to influence healthy behavior changes must be driven by theory and carefully planned and evaluated. The proposed model is offered as a useful tool for the behavior change strategist.

Digital surveying and mapping of forest road network for development of a GIS tool for the effective protection and management of natural ecosystems

NASA Astrophysics Data System (ADS)

Drosos, Vasileios C.; Liampas, Sarantis-Aggelos G.; Doukas, Aristotelis-Kosmas G.

2014-08-01

In our time, the Geographic Information Systems (GIS) have become important tools, not only in the geosciences and environmental sciences, as well as virtually for all researches that require monitoring, planning or land management. The purpose of this paper was to develop a planning tool and decision making tool using AutoCAD Map software, ArcGIS and Google Earth with emphasis on the investigation of the suitability of forest roads' mapping and the range of its implementation in Greece in prefecture level. Integrating spatial information into a database makes data available throughout the organization; improving quality, productivity, and data management. Also working in such an environment, you can: Access and edit information, integrate and analyze data and communicate effectively. To select desirable information such as forest road network in a very early stage in the planning of silviculture operations, for example before the planning of the harvest is carried out. The software programs that were used were AutoCAD Map for the export in shape files for the GPS data, and ArcGIS in shape files (ArcGlobe), while Google Earth with KML files (Keyhole Markup Language) in order to better visualize and evaluate existing conditions, design in a real-world context and exchange information with government agencies, utilities, and contractors in both CAD and GIS data formats. The automation of the updating procedure and transfer of any files between agencies-departments is one of the main tasks of the integrated GIS-tool among the others should be addressed.

Asthma education: different viewpoints elicited by qualitative and quantitative methods.

PubMed

Damon, Scott A; Tardif, Richard R

2015-04-01

This project began as a qualitative examination of how asthma education provided by health professionals could be improved. Unexpected qualitative findings regarding the use of Asthma Action Plans and the importance of insurance reimbursement for asthma education prompted further quantitative examination. Qualitative individual interviews were conducted with primary care physicians in private practice who routinely provide initial diagnoses of asthma and focus groups were conducted with other clinicians in private primary care practices who routinely provide asthma education. Using the DocStyles quantitative tool two questions regarding Asthma Action Plans and insurance reimbursement were asked of a representative sample of physicians and other clinicians. The utility of Asthma Action Plans was questioned in the 2012 qualitative study. Qualitative findings also raised questions regarding whether reimbursement is the barrier to asthma education for patients performed by medical professionals it is thought to be. 2013 quantitative findings show that the majority of clinicians see Asthma Action Plans as useful. The question of whether reimbursement is a barrier to providing asthma education to patients was not resolved by the quantitative data. The majority of clinicians see Asthma Action Plans as a useful tool for patient education. Clinicians had less clear opinions on whether the lack of defined reimbursement codes acted as a barrier to asthma education. The study also provided useful audience data for design of new asthma educational tools developed by CDC.

Inverse-optimized 3D conformal planning: Minimizing complexity while achieving equivalence with beamlet IMRT in multiple clinical sites

PubMed Central

Fraass, Benedick A.; Steers, Jennifer M.; Matuszak, Martha M.; McShan, Daniel L.

2012-01-01

Purpose: Inverse planned intensity modulated radiation therapy (IMRT) has helped many centers implement highly conformal treatment planning with beamlet-based techniques. The many comparisons between IMRT and 3D conformal (3DCRT) plans, however, have been limited because most 3DCRT plans are forward-planned while IMRT plans utilize inverse planning, meaning both optimization and delivery techniques are different. This work avoids that problem by comparing 3D plans generated with a unique inverse planning method for 3DCRT called inverse-optimized 3D (IO-3D) conformal planning. Since IO-3D and the beamlet IMRT to which it is compared use the same optimization techniques, cost functions, and plan evaluation tools, direct comparisons between IMRT and simple, optimized IO-3D plans are possible. Though IO-3D has some similarity to direct aperture optimization (DAO), since it directly optimizes the apertures used, IO-3D is specifically designed for 3DCRT fields (i.e., 1–2 apertures per beam) rather than starting with IMRT-like modulation and then optimizing aperture shapes. The two algorithms are very different in design, implementation, and use. The goals of this work include using IO-3D to evaluate how close simple but optimized IO-3D plans come to nonconstrained beamlet IMRT, showing that optimization, rather than modulation, may be the most important aspect of IMRT (for some sites). Methods: The IO-3D dose calculation and optimization functionality is integrated in the in-house 3D planning/optimization system. New features include random point dose calculation distributions, costlet and cost function capabilities, fast dose volume histogram (DVH) and plan evaluation tools, optimization search strategies designed for IO-3D, and an improved, reimplemented edge/octree calculation algorithm. The IO-3D optimization, in distinction to DAO, is designed to optimize 3D conformal plans (one to two segments per beam) and optimizes MLC segment shapes and weights with various user-controllable search strategies which optimize plans without beamlet or pencil beam approximations. IO-3D allows comparisons of beamlet, multisegment, and conformal plans optimized using the same cost functions, dose points, and plan evaluation metrics, so quantitative comparisons are straightforward. Here, comparisons of IO-3D and beamlet IMRT techniques are presented for breast, brain, liver, and lung plans. Results: IO-3D achieves high quality results comparable to beamlet IMRT, for many situations. Though the IO-3D plans have many fewer degrees of freedom for the optimization, this work finds that IO-3D plans with only one to two segments per beam are dosimetrically equivalent (or nearly so) to the beamlet IMRT plans, for several sites. IO-3D also reduces plan complexity significantly. Here, monitor units per fraction (MU/Fx) for IO-3D plans were 22%–68% less than that for the 1 cm × 1 cm beamlet IMRT plans and 72%–84% than the 0.5 cm × 0.5 cm beamlet IMRT plans. Conclusions: The unique IO-3D algorithm illustrates that inverse planning can achieve high quality 3D conformal plans equivalent (or nearly so) to unconstrained beamlet IMRT plans, for many sites. IO-3D thus provides the potential to optimize flat or few-segment 3DCRT plans, creating less complex optimized plans which are efficient and simple to deliver. The less complex IO-3D plans have operational advantages for scenarios including adaptive replanning, cases with interfraction and intrafraction motion, and pediatric patients. PMID:22755717

Health communication cards as a tool for behaviour change.

PubMed

Matteson, Carrie L; Merth, Thomas D N; Finegood, Diane T

2014-01-01

Individuals seeking healthcare treatment in the context of obesity often experience difficulty engaging in discussions around their health and face challenges finding consensus with practitioners on care plans that best suit their lives. The complex set of biological, social, and environmental variables that have contributed to the higher prevalence of obesity are well illustrated in the foresight obesity system map. Effectively understanding and addressing key variables for each individual has proven to be difficult, with clinicians facing barriers and limited resources to help address patients' unique needs. However, productive discussions inspired by patient centered care may be particularly effective in promoting behaviour change. Tools based on systems science that facilitate patient centered care and help identify behaviour change priorities have not been developed to help treat adult obesity. This project created and pilot tested a card based clinical communication tool designed to help facilitate conversations with individuals engaged in health behaviour change. The health communication cards were designed to help direct conversation between patients and healthcare providers toward issues relevant to the individual. Use of the cards to facilitate patient driven conversations in clinical care may help to streamline conversations, set realistic care plan goals, and improve long term rates of compliance.

Algorithm for planning a double-jaw orthognathic surgery using a computer-aided surgical simulation (CASS) protocol. Part 1: planning sequence.

PubMed

Xia, J J; Gateno, J; Teichgraeber, J F; Yuan, P; Chen, K-C; Li, J; Zhang, X; Tang, Z; Alfi, D M

2015-12-01

The success of craniomaxillofacial (CMF) surgery depends not only on the surgical techniques, but also on an accurate surgical plan. The adoption of computer-aided surgical simulation (CASS) has created a paradigm shift in surgical planning. However, planning an orthognathic operation using CASS differs fundamentally from planning using traditional methods. With this in mind, the Surgical Planning Laboratory of Houston Methodist Research Institute has developed a CASS protocol designed specifically for orthognathic surgery. The purpose of this article is to present an algorithm using virtual tools for planning a double-jaw orthognathic operation. This paper will serve as an operation manual for surgeons wanting to incorporate CASS into their clinical practice. Copyright © 2015 International Association of Oral and Maxillofacial Surgeons. Published by Elsevier Ltd. All rights reserved.

Computer-aided software development process design

NASA Technical Reports Server (NTRS)

Lin, Chi Y.; Levary, Reuven R.

1989-01-01

The authors describe an intelligent tool designed to aid managers of software development projects in planning, managing, and controlling the development process of medium- to large-scale software projects. Its purpose is to reduce uncertainties in the budget, personnel, and schedule planning of software development projects. It is based on dynamic model for the software development and maintenance life-cycle process. This dynamic process is composed of a number of time-varying, interacting developmental phases, each characterized by its intended functions and requirements. System dynamics is used as a modeling methodology. The resulting Software LIfe-Cycle Simulator (SLICS) and the hybrid expert simulation system of which it is a subsystem are described.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cox, S.; Katz, J.; Wurtenberger, L.

Low emission development strategies (LEDS) articulate economy-wide policies and implementation plans designed to enable a country to meet its long-term development objectives while reducing greenhouse gas emissions. A development impact assessment tool was developed to inform an analytically robust and transparent prioritization of LEDS actions based on their economic, social, and environmental impacts. The graphical tool helps policymakers communicate the development impacts of LEDS options and identify actions that help meet both emissions reduction and development goals. This paper summarizes the adaptation and piloting of the tool in Kenya and Montenegro. The paper highlights strengths of the tool and discussesmore » key needs for improving it.« less

Barriers and Facilitators to Implementing the HEADS-ED: A Rapid Screening Tool for Pediatric Patients in Emergency Departments.

PubMed

MacWilliams, Kate; Curran, Janet; Racek, Jakub; Cloutier, Paula; Cappelli, Mario

2017-12-01

This study sought to identify barriers and facilitators to the implementation of the HEADS-ED, a screening tool appropriate for use in the emergency department (ED) that facilitates standardized assessments, discharge planning, charting, and linking pediatric mental health patients to appropriate community resources. A qualitative theory-based design was used to identify barriers and facilitators to implementing the HEADS-ED tool. Focus groups were conducted with participants recruited from 6 different ED settings across 2 provinces (Ontario and Nova Scotia). The Theoretical Domains Framework was used as a conceptual framework to guide data collection and to identify themes from focus group discussions. The following themes spanning 12 domains were identified as reflective of participants' beliefs about the barriers and facilitators to implementing the HEADS-ED tool: knowledge, skills, beliefs about capabilities, social professional role and identity, optimism, beliefs about consequences, reinforcement, environmental context and resources, social influences, emotion, behavioral regulation and memory, and attention and decision process. The HEADS-ED has the potential to address the need for better discharge planning, complete charting, and standardized assessments for the increasing population of pediatric mental health patients who present to EDs. This study has identified potential barriers and facilitators, which should be considered when developing an implementation plan for adopting the HEADS-ED tool into practice within EDs.

Designing a Graphical Decision Support Tool to Improve System Acquisition Decisions

DTIC Science & Technology

2009-06-01

relationships within the data [9]. Displaying acquisition data in a graphical manner was chosen because graphical formats, in general, have been...acquisition plan which includes information pertaining to the acquisition objectives, the required capability of the system, design trade-off, budgeting...which introduce artificial neural networks to approximate the real world experience of an acquisition manager [8]. However, these strategies lack a

Reflective Analysis as a Tool for Task Redesign: The Case of Prospective Elementary Teachers Solving and Posing Fraction Comparison Problems

ERIC Educational Resources Information Center

Thanheiser, Eva; Olanoff, Dana; Hillen, Amy; Feldman, Ziv; Tobias, Jennifer M.; Welder, Rachael M.

2016-01-01

Mathematical task design has been a central focus of the mathematics education research community over the last few years. In this study, six university teacher educators from six different US institutions formed a community of practice to explore key aspects of task design (planning, implementing, reflecting, and modifying) in the context of…

Design and test of a 100 ampere-hour nickel cadmium battery module

NASA Technical Reports Server (NTRS)

Gaston, S.; Wertheim, M.; Burgess, F. S.; Lehrfeld, D.; Winegard, A.

1973-01-01

A feasibility study was conducted on the design and construction of a flight-worthy replaceable battery module consisting of four 100 A.H. nickel-cadmium rechargeable cells for large manned space vehicles. The module is planned to weigh less than 43 pounds and be fully maintainable in a zero-g environment by one man without use of special tools. An active environmental control system was designed for the temperature control of the module.

The Waypoint Planning Tool: Real Time Flight Planning for Airborne Science

NASA Astrophysics Data System (ADS)

He, M.; Goodman, H. M.; Blakeslee, R.; Hall, J. M.

2010-12-01

NASA Earth science research utilizes both spaceborne and airborne real time observations in the planning and operations of its field campaigns. The coordination of air and space components is critical to achieve the goals and objectives and ensure the success of an experiment. Spaceborne imagery provides regular and continual coverage of the Earth and it is a significant component in all NASA field experiments. Real time visible and infrared geostationary images from GOES satellites and multi-spectral data from the many elements of the NASA suite of instruments aboard the TRMM, Terra, Aqua, Aura, and other NASA satellites have become norm. Similarly, the NASA Airborne Science Program draws upon a rich pool of instrumented aircraft. The NASA McDonnell Douglas DC-8, Lockheed P3 Orion, DeHavilland Twin Otter, King Air B200, Gulfstream-III are all staples of a NASA’s well-stocked, versatile hangar. A key component in many field campaigns is coordinating the aircraft with satellite overpasses, other airplanes and the constantly evolving, dynamic weather conditions. Given the variables involved, developing a good flight plan that meets the objectives of the field experiment can be a challenging and time consuming task. Planning a research aircraft mission within the context of meeting the science objectives is complex task because it is much more than flying from point A to B. Flight plans typically consist of flying a series of transects or involve dynamic path changes when “chasing” a hurricane or forest fire. These aircraft flight plans are typically designed by the mission scientists then verified and implemented by the navigator or pilot. Flight planning can be an arduous task requiring frequent sanity checks by the flight crew. This requires real time situational awareness of the weather conditions that affect the aircraft track. Scientists at the University of Alabama-Huntsville and the NASA Marshall Space Flight Center developed the Waypoint Planning Tool, an interactive software tool, that enables scientists to develop their own flight plans (also known as waypoints) with point-and-click mouse capabilities on a digital map draped with real time satellite imagery. The Waypoint Planning Tool has further advanced to include satellite orbit predictions and seamlessly interfaces with the Real Time Mission Monitor which tracks the aircraft’s position when the planes are flying. This presentation will describe the capabilities and features of the Waypoint Planning Tool highlighting the real time aspect, interactive nature and the resultant benefits to the airborne science community.

The Waypoint Planning Tool: Real Time Flight Planning for Airborne Science

NASA Technical Reports Server (NTRS)

He, Yubin; Blakeslee, Richard; Goodman, Michael; Hall, John

2010-01-01

NASA Earth science research utilizes both spaceborne and airborne real time observations in the planning and operations of its field campaigns. The coordination of air and space components is critical to achieve the goals and objectives and ensure the success of an experiment. Spaceborne imagery provides regular and continual coverage of the Earth and it is a significant component in all NASA field experiments. Real time visible and infrared geostationary images from GOES satellites and multi-spectral data from the many elements of the NASA suite of instruments aboard the TRMM, Terra, Aqua, Aura, and other NASA satellites have become norm. Similarly, the NASA Airborne Science Program draws upon a rich pool of instrumented aircraft. The NASA McDonnell Douglas DC-8, Lockheed P3 Orion, DeHavilland Twin Otter, King Air B200, Gulfstream-III are all staples of a NASA's well-stocked, versatile hangar. A key component in many field campaigns is coordinating the aircraft with satellite overpasses, other airplanes and the constantly evolving, dynamic weather conditions. Given the variables involved, developing a good flight plan that meets the objectives of the field experiment can be a challenging and time consuming task. Planning a research aircraft mission within the context of meeting the science objectives is complex task because it is much more than flying from point A to B. Flight plans typically consist of flying a series of transects or involve dynamic path changes when "chasing" a hurricane or forest fire. These aircraft flight plans are typically designed by the mission scientists then verified and implemented by the navigator or pilot. Flight planning can be an arduous task requiring frequent sanity checks by the flight crew. This requires real time situational awareness of the weather conditions that affect the aircraft track. Scientists at the University of Alabama-Huntsville and the NASA Marshall Space Flight Center developed the Waypoint Planning Tool, an interactive software tool, that enables scientists to develop their own flight plans (also known as waypoints) with point-and-click mouse capabilities on a digital map draped with real time satellite imagery. The Waypoint Planning Tool has further advanced to include satellite orbit predictions and seamlessly interfaces with the Real Time Mission Monitor which tracks the aircraft s position when the planes are flying. This presentation will describe the capabilities and features of the Waypoint Planning Tool highlighting the real time aspect, interactive nature and the resultant benefits to the airborne science community.

Effectiveness of Cooperative Learning Instructional Tools With Predict-Observe-Explain Strategy on the Topic of Cuboid and Cube Volume

NASA Astrophysics Data System (ADS)

Nurhuda; Lukito, A.; Masriyah

2018-01-01

This study aims to develop instructional tools and implement it to see the effectiveness. The method used in this research referred to Designing Effective Instruction. Experimental research with two-group pretest-posttest design method was conducted. The instructional tools have been developed is cooperative learning model with predict-observe-explain strategy on the topic of cuboid and cube volume which consist of lesson plans, POE tasks, and Tests. Instructional tools were of good quality by criteria of validity, practicality, and effectiveness. These instructional tools was very effective for teaching the volume of cuboid and cube. Cooperative instructional tool with predict-observe-explain (POE) strategy was good of quality because the teacher was easy to implement the steps of learning, students easy to understand the material and students’ learning outcomes completed classically. Learning by using this instructional tool was effective because learning activities were appropriate and students were very active. Students’ learning outcomes were completed classically and better than conventional learning. This study produced a good instructional tool and effectively used in learning. Therefore, these instructional tools can be used as an alternative to teach volume of cuboid and cube topics.

The Usability of Online Geographic Virtual Reality for Urban Planning

NASA Astrophysics Data System (ADS)

Zhang, S.; Moore, A. B.

2013-08-01

Virtual reality (VR) technology is starting to become widely and freely available (for example the online OpenSimulator tool), with potential for use in 3D urban planning and design tasks but still needing rigorous assessment to establish this. A previous study consulted with a small group of urban professionals, who concluded in a satisfaction usability test that online VR had potential value as a usable 3D communication and remote marketing tool but acknowledged that visual quality and geographic accuracy were obstacles to overcome. This research takes the investigation a significant step further to also examine the usability aspects of efficiency (how quickly tasks are completed) and effectiveness (how successfully tasks are completed), relating to OpenSimulator in an urban planning situation. The comparative study pits a three-dimensional VR model (with increased graphic fidelity and geographic content to address the feedback of the previous study) of a subdivision design (in a Dunedin suburb) against 3D models built with GIS (ArcGIS) and CAD (BricsCAD) tools, two types of software environment well established in urban professional practice. Urban professionals participated in the study by attempting to perform timed tasks correctly in each of the environments before being asked questions about the technologies involved and their perceived importance to their professional work. The results reinforce the positive feedback for VR of the previous study, with the graphical and geographic data issues being somewhat addressed (though participants stressed the need for accurate and precise object and terrain modification capabilities in VR). Ease-ofuse and associated fastest task completion speed were significant positive outcomes to emerge from the comparison with GIS and CAD, pointing to a strong future for VR in an urban planning context.

A strategic planning methodology for aircraft redesign

NASA Astrophysics Data System (ADS)

Romli, Fairuz Izzuddin

Due to a progressive market shift to a customer-driven environment, the influence of engineering changes on the product's market success is becoming more prominent. This situation affects many long lead-time product industries including aircraft manufacturing. Derivative development has been the key strategy for many aircraft manufacturers to survive the competitive market and this trend is expected to continue in the future. Within this environment of design adaptation and variation, the main market advantages are often gained by the fastest aircraft manufacturers to develop and produce their range of market offerings without any costly mistakes. This realization creates an emphasis on the efficiency of the redesign process, particularly on the handling of engineering changes. However, most activities involved in the redesign process are supported either inefficiently or not at all by the current design methods and tools, primarily because they have been mostly developed to improve original product development. In view of this, the main goal of this research is to propose an aircraft redesign methodology that will act as a decision-making aid for aircraft designers in the change implementation planning of derivative developments. The proposed method, known as Strategic Planning of Engineering Changes (SPEC), combines the key elements of the product redesign planning and change management processes. Its application is aimed at reducing the redesign risks of derivative aircraft development, improving the detection of possible change effects propagation, increasing the efficiency of the change implementation planning and also reducing the costs and the time delays due to the redesign process. To address these challenges, four research areas have been identified: baseline assessment, change propagation prediction, change impact analysis and change implementation planning. Based on the established requirements for the redesign planning process, several methods and tools that are identified within these research areas have been abstracted and adapted into the proposed SPEC method to meet the research goals. The proposed SPEC method is shown to be promising in improving the overall efficiency of the derivative aircraft planning process through two notional aircraft system redesign case studies that are presented in this study.

Emergency Medical Dispatch. National Standard Curriculum. Instructor Guide. Trainee Guide.

ERIC Educational Resources Information Center

National Highway Traffic Safety Administration (DOT), Washington, DC.

This guide contains all instructor materials and requirements for the National Highway Traffic Safety Administration (NHTSA), Emergency Medical Dispatch (EMD) National Standard Curriculum. It includes lesson plans, instructional aids, and tools and supporting information designed to elevate trained and experienced public safety telecommunicators…

Theory and Design Tools For Studies of Reactions to Abrupt Changes in Noise Exposure

NASA Technical Reports Server (NTRS)

Fields, James M.; Ehrlich, Gary E.; Zador, Paul; Shepherd, Kevin P. (Technical Monitor)

2000-01-01

Study plans, a pre-tested questionnaire, a sample design evaluation tool, a community publicity monitoring plan, and a theoretical framework have been developed to support combined social/acoustical surveys of residents' reactions to an abrupt change in environmental noise, Secondary analyses of more than 20 previous surveys provide estimates of three parameters of a study simulation model; within individual variability, between study wave variability, and between neighborhood variability in response to community noise. The simulation model predicts the precision of the results from social surveys of reactions to noise, including changes in noise. When the study simulation model analyzed the population distribution, noise exposure environments and feasible noise measurement program at a proposed noise change survey site, it was concluded that the site could not yield sufficient precise estimates of human reaction model to justify conducting a survey. Additional secondary analyses determined that noise reactions are affected by the season of the social survey.

Distributed Observer Network

NASA Technical Reports Server (NTRS)

2008-01-01

NASA s advanced visual simulations are essential for analyses associated with life cycle planning, design, training, testing, operations, and evaluation. Kennedy Space Center, in particular, uses simulations for ground services and space exploration planning in an effort to reduce risk and costs while improving safety and performance. However, it has been difficult to circulate and share the results of simulation tools among the field centers, and distance and travel expenses have made timely collaboration even harder. In response, NASA joined with Valador Inc. to develop the Distributed Observer Network (DON), a collaborative environment that leverages game technology to bring 3-D simulations to conventional desktop and laptop computers. DON enables teams of engineers working on design and operations to view and collaborate on 3-D representations of data generated by authoritative tools. DON takes models and telemetry from these sources and, using commercial game engine technology, displays the simulation results in a 3-D visual environment. Multiple widely dispersed users, working individually or in groups, can view and analyze simulation results on desktop and laptop computers in real time.

Options to improve energy efficiency for educational building

NASA Astrophysics Data System (ADS)

Jahan, Mafruha

The cost of energy is a major factor that must be considered for educational facility budget planning purpose. The analysis of energy related issues and options can be complex and requires significant time and detailed effort. One way to facilitate the inclusion of energy option planning in facility planning efforts is to utilize a tool that allows for quick appraisal of the facility energy profile. Once such an appraisal is accomplished, it is then possible to rank energy improvement options consistently with other facility needs and requirements. After an energy efficiency option has been determined to have meaningful value in comparison with other facility planning options, it is then possible to utilize the initial appraisal as the basis for an expanded consideration of additional facility and energy use detail using the same analytic system used for the initial appraisal. This thesis has developed a methodology and an associated analytic model to assist in these tasks and thereby improve the energy efficiency of educational facilities. A detailed energy efficiency and analysis tool is described that utilizes specific university building characteristics such as size, architecture, envelop, lighting, occupancy, thermal design which allows reducing the annual energy consumption. Improving the energy efficiency of various aspects of an educational building's energy performance can be complex and can require significant time and experience to make decisions. The approach developed in this thesis initially assesses the energy design for a university building. This initial appraisal is intended to assist administrators in assessing the potential value of energy efficiency options for their particular facility. Subsequently this scoping design can then be extended as another stage of the model by local facility or planning personnel to add more details and engineering aspects to the initial screening model. This approach can assist university planning efforts to identify the most cost effective combinations of energy efficiency strategies. The model analyzes and compares the payback periods of all proposed Energy Performance Measures (EPMs) to determine which has the greatest potential value.

Scenario for concurrent conceptual assembly line design: A case study

NASA Astrophysics Data System (ADS)

Mas, F.; Ríos, J.; Menéndez, J. L.

2012-04-01

The decision to design and build a new aircraft is preceded by years of research and study. Different disciplines work together throughout the lifecycle to ensure not only a complete functional definition of the product, but also a complete industrialization, a marketing plan, a maintenance plan, etc. This case study focuses on the conceptual design phase. During this phase, the design solutions that will meet the functional and industrial requirements are defined, i.e.: the basic requirements of industrialization. During this phase, several alternatives are studied, and the most attractive in terms of performance and cost requirements is selected. As a result of the study of these alternatives, it is possible to define an early conceptual design of the assembly line and its basic parameters. The plant needs, long cycle jigs & tools or industrial means and human resources with the necessary skills can be determined in advance.

MAP-IT: A Practical Tool for Planning Complex Behavior Modification Interventions.

PubMed

Hansen, Sylvia; Kanning, Martina; Lauer, Romy; Steinacker, Jürgen M; Schlicht, Wolfgang

2017-09-01

Health research often aims to prevent noncommunicable diseases and to improve individual and public health by discovering intervention strategies that are effective in changing behavior and/or environments that are detrimental to one's health. Ideally, findings from original research support practitioners in planning and implementing effective interventions. Unfortunately, interventions often fail to overcome the translational block between science and practice. They often ignore theoretical knowledge, overlook empirical evidence, and underrate the impact of the environment. Accordingly, sustainable changes in individual behavior and/or the environment are difficult to achieve. Developing theory-driven and evidence-based interventions in the real world is a complex task. Existing implementation frameworks and theories often do not meet the needs of health practitioners. The purpose of this article is to synthesize existing frameworks and to provide a tool, the Matrix Assisting Practitioner's Intervention Planning Tool (MAP-IT), that links research to practice and helps practitioners to design multicomponent interventions. In this article, we use physical activity of older adults as an example to explain the rationale of MAP-IT. In MAP-IT, individual as well as environmental mechanisms are listed and behavior change techniques are linked to these mechanisms and to intervention components. MAP-IT is theory-driven and evidence-based. It is time-saving and helpful for practitioners when planning complex interventions.

A qualitative appraisal of stakeholder reactions to a tool for burden of disease–based health system budgeting in Ghana

PubMed Central

Awoonor-Williams, John Koku; Schmitt, Margaret L.; Tiah, Janet; Ndago, Joyce; Asuru, Rofina; Bawah, Ayaga A.; Phillips, James F.

2016-01-01

Background In 2010, the Ghana Health Service launched a program of cooperation with the Tanzania Ministry of Health and Social Welfare that was designed to adapt Tanzania's PLANREP budgeting and reporting tool to Ghana's primary health care program. The product of this collaboration is a system of budgeting, data visualization, and reporting that is known as the District Health Planning and Reporting Tool (DiHPART). Objective This study was conducted to evaluate the design and implementation processes (technical, procedures, feedback, maintenance, and monitoring) of the DiHPART tool in northern Ghana. Design This paper reports on a qualitative appraisal of user reactions to the DiHPART system and implications of pilot experience for national scale-up. A total of 20 health officials responsible for financial planning operations were drawn from the national, regional, and district levels of the health system and interviewed in open-ended discussions about their reactions to DiHPART and suggestions for systems development. Results The findings show that technical shortcomings merit correction before scale-up can proceed. The review makes note of features of the software system that could be developed, based on experience gained from the pilot. Changes in the national system of financial reporting and budgeting complicate DiHPART utilization. This attests to the importance of pursuing a software application framework that anticipates the need for automated software generation. Conclusions Despite challenges encountered in the pilot, the results lend support to the notion that evidence-based budgeting merits development and implementation in Ghana. PMID:27246868

4D modeling in high-rise construction

NASA Astrophysics Data System (ADS)

Balakina, Anastasiya; Simankina, Tatyana; Lukinov, Vitaly

2018-03-01

High-rise construction is a complex construction process, requiring the use of more perfected and sophisticated tools for design, planning and construction management. The use of BIM-technologies allows minimizing the risks associated with design errors and errors that occur during construction. This article discusses a visual planning method using the 4D model, which allows the project team to create an accurate and complete construction plan, which is much more difficult to achieve with the help of traditional planning methods. The use of the 4D model in the construction of a 70-story building allowed to detect spatial and temporal errors before the start of construction work. In addition to identifying design errors, 4D modeling has allowed to optimize the construction, as follows: to optimize the operation of cranes, the placement of building structures and materials at various stages of construction, to optimize the organization of work performance, as well as to monitor the activities related to the preparation of the construction site for compliance with labor protection and safety requirements, which resulted in saving money and time.

State Health Mapper: An Interactive, Web-Based Tool for Physician Workforce Planning, Recruitment, and Health Services Research.

PubMed

Krause, Denise D

2015-11-01

Health rankings in Mississippi are abysmal. Mississippi also has fewer physicians to serve its population compared with all other states. Many residents of this predominately rural state do not have access to healthcare providers. To better understand the demographics and distribution of the current health workforce in Mississippi, the main objective of the study was to design a Web-based, spatial, interactive application to visualize and explore the physician workforce. A Web application was designed to assist in health workforce planning. Secondary datasets of licensure and population information were obtained, and live feeds from licensure systems are being established. Several technologies were used to develop an intuitive, user-friendly application. Custom programming was completed in JavaScript so the application could run on most platforms, including mobile devices. The application allows users to identify and query geographic locations of individual or aggregated physicians based on attributes included in the licensure data, to perform drive time or buffer analyses, and to explore sociodemographic population data by geographic area of choice. This Web-based application with analytical tools visually represents the physician workforce licensed in Mississippi and its attributes, and provides access to much-needed information for statewide health workforce planning and research. The success of the application is not only based on the practicality of the tool but also on its ease of use. Feedback has been positive and has come from a wide variety of organizations across the state.

NASA Planning for Orion Multi-Purpose Crew Vehicle Ground Operations

NASA Technical Reports Server (NTRS)

Letchworth, Gary; Schlierf, Roland

2011-01-01

The NASA Orion Ground Processing Team was originally formed by the Kennedy Space Center (KSC) Constellation (Cx) Project Office's Orion Division to define, refine and mature pre-launch and post-landing ground operations for the Orion human spacecraft. The multidisciplined KSC Orion team consisted of KSC civil servant, SAIC, Productivity Apex, Inc. and Boeing-CAPPS engineers, project managers and safety engineers, as well as engineers from Constellation's Orion Project and Lockheed Martin Orion Prime contractor. The team evaluated the Orion design configurations as the spacecraft concept matured between Systems Design Review (SDR), Systems Requirement Review (SRR) and Preliminary Design Review (PDR). The team functionally decomposed prelaunch and post-landing steps at three levels' of detail, or tiers, beginning with functional flow block diagrams (FFBDs). The third tier FFBDs were used to build logic networks and nominal timelines. Orion ground support equipment (GSE) was identified and mapped to each step. This information was subsequently used in developing lower level operations steps in a Ground Operations Planning Document PDR product. Subject matter experts for each spacecraft and GSE subsystem were used to define 5th - 95th percentile processing times for each FFBD step, using the Delphi Method. Discrete event simulations used this information and the logic network to provide processing timeline confidence intervals for launch rate assessments. The team also used the capabilities of the KSC Visualization Lab, the FFBDs and knowledge of the spacecraft, GSE and facilities to build visualizations of Orion pre-launch and postlanding processing at KSC. Visualizations were a powerful tool for communicating planned operations within the KSC community (i.e., Ground Systems design team), and externally to the Orion Project, Lockheed Martin spacecraft designers and other Constellation Program stakeholders during the SRR to PDR timeframe. Other operations planning tools included Kaizen/Lean events, mockups and human factors analysis. The majority of products developed by this team are applicable as KSC prepares 21st Century Ground Systems for the Orion Multi-Purpose Crew Vehicle and Space Launch System.

PST and PARR: Plan specification tools and a planning and resource reasoning shell for use in satellite mission planning

NASA Technical Reports Server (NTRS)

Mclean, David; Yen, Wen

1989-01-01

Plan Specification Tools (PST) are tools that allow the user to specify satellite mission plans in terms of satellite activities, relevent orbital events, and targets for observation. The output of these tools is a set of knowledge bases and environmental events which can then be used by a Planning And Resource Reasoning (PARR) shell to build a schedule. PARR is a reactive planning shell which is capable of reasoning about actions in the satellite mission planning domain. Each of the PST tools and PARR are described as well as the use of PARR for scheduling computer usage in the multisatellite operations control center at Goddard Space Flight Center.

The novel use of climate information in water utility planning

NASA Astrophysics Data System (ADS)

Yates, D. N.

2016-12-01

Municipal water utilities have a long history of planning and yet their traditional use of climate information has been rather static in nature, using approaches such as 'safe-yield' to design their water infrastructure. New planning paradigms, such as triple-bottom-line approaches that integerate environemntal, social, and financial aspects of the water enterprise have led water utilies to use climate information in a much more rich and informative way. This presentation will describe examples of how climate climate information, hydrologic modeling, and water systems decision support tools are uniquely bleneded to help water utilties make informed decisions.

NEEMO 21: Tools, Techniques, Technologies & Training for Science Exploration EVA

NASA Technical Reports Server (NTRS)

Graff, Trevor

2016-01-01

The 21st mission of the NASA Extreme Environment Mission Operations (NEEMO) was a highly integrated operational test and evaluation of tools, techniques, technologies, and training for science driven exploration during Extravehicular Activity (EVA).The 16-day mission was conducted from the Aquarius habitat, an underwater laboratory, off the coast of Key Largo, FL. The unique facility, authentic science objectives, and diverse skill-sets of the crew/team facilitate the planning and design for future space exploration.

Army Sustainability Modelling Analysis and Reporting Tool Phase 1: User Manual and Results Interpretation Guide

DTIC Science & Technology

2009-11-01

force structure liability analysis tool, designed to forecast the dynamics of personnel and equipment populations over time for a particular scenario...it is intended that it will support analysis of the sustainability of planned Army force structures against a range of possible scenarios, as well as...the force options testing process. A-SMART Phase 1 has been limited to the development of personnel, major equipment and supplies/strategic lift

Pydna: a simulation and documentation tool for DNA assembly strategies using python.

PubMed

Pereira, Filipa; Azevedo, Flávio; Carvalho, Ângela; Ribeiro, Gabriela F; Budde, Mark W; Johansson, Björn

2015-05-02

Recent advances in synthetic biology have provided tools to efficiently construct complex DNA molecules which are an important part of many molecular biology and biotechnology projects. The planning of such constructs has traditionally been done manually using a DNA sequence editor which becomes error-prone as scale and complexity of the construction increase. A human-readable formal description of cloning and assembly strategies, which also allows for automatic computer simulation and verification, would therefore be a valuable tool. We have developed pydna, an extensible, free and open source Python library for simulating basic molecular biology DNA unit operations such as restriction digestion, ligation, PCR, primer design, Gibson assembly and homologous recombination. A cloning strategy expressed as a pydna script provides a description that is complete, unambiguous and stable. Execution of the script automatically yields the sequence of the final molecule(s) and that of any intermediate constructs. Pydna has been designed to be understandable for biologists with limited programming skills by providing interfaces that are semantically similar to the description of molecular biology unit operations found in literature. Pydna simplifies both the planning and sharing of cloning strategies and is especially useful for complex or combinatorial DNA molecule construction. An important difference compared to existing tools with similar goals is the use of Python instead of a specifically constructed language, providing a simulation environment that is more flexible and extensible by the user.

Conservation planning for offsetting the impacts of development: a case study of biodiversity and renewable energy in the Mojave Desert

USGS Publications Warehouse

Kreitler, Jason R.; Schloss, Carrie A.; Soong, Oliver; Lee Hannah,; Davis, Frank W.

2015-01-01

Balancing society’s competing needs of development and conservation requires careful consideration of tradeoffs. Renewable energy development and biodiversity conservation are often considered beneficial environmental goals. The direct footprint and disturbance of renewable energy, however, can displace species’ habitat and negatively impact populations and natural communities if sited without ecological consideration. Offsets have emerged as a potentially useful tool to mitigate residual impacts after trying to avoid, minimize, or restore affected sites. Yet the problem of efficiently designing a set of offset sites becomes increasingly complex where many species or many sites are involved. Spatial conservation prioritization tools are designed to handle this problem, but have seen little application to offset siting and analysis. To address this need we designed an offset siting support tool for the Desert Renewable Energy Conservation Plan (DRECP) of California, and present a case study of hypothetical impacts from solar development in the Western Mojave subsection. We compare two offset scenarios designed to mitigate a hypothetical 15,331 ha derived from proposed utility-scale solar energy development (USSED) projects. The first scenario prioritizes offsets based precisely on impacted features, while the second scenario offsets impacts to maximize biodiversity conservation gains in the region. The two methods only agree on 28% of their prioritized sites and differ in meeting species-specific offset goals. Differences between the two scenarios highlight the importance of clearly specifying choices and priorities for offset siting and mitigation in general. Similarly, the effects of background climate and land use change may lessen the durability or effectiveness of offsets if not considered. Our offset siting support tool was designed specifically for the DRECP area, but with minor code modification could work well in other offset analyses, and could provide continuing support for a potentially innovative mitigation solution to environmental impacts.

Conservation Planning for Offsetting the Impacts of Development: A Case Study of Biodiversity and Renewable Energy in the Mojave Desert.

PubMed

Kreitler, Jason; Schloss, Carrie A; Soong, Oliver; Hannah, Lee; Davis, Frank W

2015-01-01

Balancing society's competing needs of development and conservation requires careful consideration of tradeoffs. Renewable energy development and biodiversity conservation are often considered beneficial environmental goals. The direct footprint and disturbance of renewable energy, however, can displace species' habitat and negatively impact populations and natural communities if sited without ecological consideration. Offsets have emerged as a potentially useful tool to mitigate residual impacts after trying to avoid, minimize, or restore affected sites. Yet the problem of efficiently designing a set of offset sites becomes increasingly complex where many species or many sites are involved. Spatial conservation prioritization tools are designed to handle this problem, but have seen little application to offset siting and analysis. To address this need we designed an offset siting support tool for the Desert Renewable Energy Conservation Plan (DRECP) of California, and present a case study of hypothetical impacts from solar development in the Western Mojave subsection. We compare two offset scenarios designed to mitigate a hypothetical 15,331 ha derived from proposed utility-scale solar energy development (USSED) projects. The first scenario prioritizes offsets based precisely on impacted features, while the second scenario offsets impacts to maximize biodiversity conservation gains in the region. The two methods only agree on 28% of their prioritized sites and differ in meeting species-specific offset goals. Differences between the two scenarios highlight the importance of clearly specifying choices and priorities for offset siting and mitigation in general. Similarly, the effects of background climate and land use change may lessen the durability or effectiveness of offsets if not considered. Our offset siting support tool was designed specifically for the DRECP area, but with minor code modification could work well in other offset analyses, and could provide continuing support for a potentially innovative mitigation solution to environmental impacts.

Conservation Planning for Offsetting the Impacts of Development: A Case Study of Biodiversity and Renewable Energy in the Mojave Desert

PubMed Central

Kreitler, Jason; Schloss, Carrie A.; Soong, Oliver; Hannah, Lee; Davis, Frank W.

2015-01-01

Balancing society’s competing needs of development and conservation requires careful consideration of tradeoffs. Renewable energy development and biodiversity conservation are often considered beneficial environmental goals. The direct footprint and disturbance of renewable energy, however, can displace species’ habitat and negatively impact populations and natural communities if sited without ecological consideration. Offsets have emerged as a potentially useful tool to mitigate residual impacts after trying to avoid, minimize, or restore affected sites. Yet the problem of efficiently designing a set of offset sites becomes increasingly complex where many species or many sites are involved. Spatial conservation prioritization tools are designed to handle this problem, but have seen little application to offset siting and analysis. To address this need we designed an offset siting support tool for the Desert Renewable Energy Conservation Plan (DRECP) of California, and present a case study of hypothetical impacts from solar development in the Western Mojave subsection. We compare two offset scenarios designed to mitigate a hypothetical 15,331 ha derived from proposed utility-scale solar energy development (USSED) projects. The first scenario prioritizes offsets based precisely on impacted features, while the second scenario offsets impacts to maximize biodiversity conservation gains in the region. The two methods only agree on 28% of their prioritized sites and differ in meeting species-specific offset goals. Differences between the two scenarios highlight the importance of clearly specifying choices and priorities for offset siting and mitigation in general. Similarly, the effects of background climate and land use change may lessen the durability or effectiveness of offsets if not considered. Our offset siting support tool was designed specifically for the DRECP area, but with minor code modification could work well in other offset analyses, and could provide continuing support for a potentially innovative mitigation solution to environmental impacts. PMID:26529595

Assessment of PlanIQ Feasibility DVH for head and neck treatment planning.

PubMed

Fried, David V; Chera, Bhishamjit S; Das, Shiva K

2017-09-01

Designing a radiation plan that optimally delivers both target coverage and normal tissue sparing is challenging. There are limited tools to determine what is dosimetrically achievable and frequently the experience of the planner/physician is relied upon to make these determinations. PlanIQ software provides a tool that uses target and organ at risk (OAR) geometry to indicate the difficulty of achieving different points for organ dose-volume histograms (DVH). We hypothesized that PlanIQ Feasibility DVH may aid planners in reducing dose to OARs. Clinically delivered head and neck treatments (clinical plan) were re-planned (re-plan) putting high emphasis on maximally sparing the contralateral parotid gland, contralateral submandibular gland, and larynx while maintaining routine clinical dosimetric objectives. The planner was blinded to the results of the clinically delivered plan as well as the Feasibility DVHs from PlanIQ. The re-plan treatments were designed using 3-arc VMAT in Raystation (RaySearch Laboratories, Sweden). The planner was then given the results from the PlanIQ Feasibility DVH analysis and developed an additional plan incorporating this information using 4-arc VMAT (IQ plan). The DVHs across the three treatment plans were compared with what was deemed "impossible" by PlanIQ's Feasibility DVH (Impossible DVH). The impossible DVH (red) is defined as the DVH generated using the minimal dose that any voxel outside the targets must receive given 100% target coverage. The re-plans performed blinded to PlanIQ Feasibilty DVH achieved superior sparing of aforementioned OARs compared to the clinically delivered plans and resulted in discrepancies from the impossible DVHs by an average of 200-700 cGy. Using the PlanIQ Feasibility DVH led to additionalOAR sparing compared to both the re-plans and clinical plans and reduced the discrepancies from the impossible DVHs to an average of approximately 100 cGy. The dose reduction from clinical to re-plan and re-plan to IQ plan were significantly different even when taking into account multiple hypothesis testing for both the contralateral parotid and the larynx (P < 0.004 for all comparisons). No significant differences were observed between the three plans for the contralateral parotid when considering multiple hypothesis testing. Clinical treatment plans and blinded re-plans were found to suboptimally spare OARs. PlanIQ could aid planners in generating treatment plans that push the limits of OAR sparing while maintaining routine clinical target coverage goals. © 2017 The Authors. Journal of Applied Clinical Medical Physics published by Wiley Periodicals, Inc. on behalf of American Association of Physicists in Medicine.

Practical Education Support to Foster Engineers at Manufacturing and Engineering Design Center in Muroran Institute of Technology

NASA Astrophysics Data System (ADS)

Kazama, Toshiharu; Hanajima, Naohiko; Shimizu, Kazumichi; Satoh, Kohki

To foster engineers with creative power, Muroran Institute of Technology established Manufacturing and Engineering Design Center (MEDeC) that concentrates on Monozukuri. MEDeC consists of three project groups : i) Education Support Group provides educational support for practical training classes on and off campus and PDCA (plan-do-check-action) -conscious engineering design education related to Monozukuri ; ii) Fundamental Manufacturing Research Group carries out nurture research into fundamental and innovative technology of machining and manufacturing, and iii) Regional Cooperation Group coordinates the activities in cooperation with bureau, schools and industries in and around Muroran City. MEDeC has a fully integrated collection of machine tools and hand tools for manufacturing, an atelier, a tatara workplace, implements for measurement and related equipment designed for practically teaching state-of-the-practice manufacturing methods.

TU-C-17A-03: An Integrated Contour Evaluation Software Tool Using Supervised Pattern Recognition for Radiotherapy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chen, H; Tan, J; Kavanaugh, J

Purpose: Radiotherapy (RT) contours delineated either manually or semiautomatically require verification before clinical usage. Manual evaluation is very time consuming. A new integrated software tool using supervised pattern contour recognition was thus developed to facilitate this process. Methods: The contouring tool was developed using an object-oriented programming language C# and application programming interfaces, e.g. visualization toolkit (VTK). The C# language served as the tool design basis. The Accord.Net scientific computing libraries were utilized for the required statistical data processing and pattern recognition, while the VTK was used to build and render 3-D mesh models from critical RT structures in real-timemore » and 360° visualization. Principal component analysis (PCA) was used for system self-updating geometry variations of normal structures based on physician-approved RT contours as a training dataset. The inhouse design of supervised PCA-based contour recognition method was used for automatically evaluating contour normality/abnormality. The function for reporting the contour evaluation results was implemented by using C# and Windows Form Designer. Results: The software input was RT simulation images and RT structures from commercial clinical treatment planning systems. Several abilities were demonstrated: automatic assessment of RT contours, file loading/saving of various modality medical images and RT contours, and generation/visualization of 3-D images and anatomical models. Moreover, it supported the 360° rendering of the RT structures in a multi-slice view, which allows physicians to visually check and edit abnormally contoured structures. Conclusion: This new software integrates the supervised learning framework with image processing and graphical visualization modules for RT contour verification. This tool has great potential for facilitating treatment planning with the assistance of an automatic contour evaluation module in avoiding unnecessary manual verification for physicians/dosimetrists. In addition, its nature as a compact and stand-alone tool allows for future extensibility to include additional functions for physicians’ clinical needs.« less

Benefit design innovations: implications for consumer-directed health care.

PubMed

Tu, Ha T; Ginsburg, Paul B

2007-02-01

Current health insurance benefit designs that simply rely on higher, one-size-fits-all patient cost sharing have limited potential to curb rapidly rising costs, but innovations in benefit design can potentially make cost sharing a more effective tool, according to a new study by the Center for Studying Health System Change (HSC). Innovative benefit designs include incentives to encourage healthy behaviors; incentives that vary by service type, patient condition or enrollee income; and incentives to use efficient providers. But most applications of these innovative designs are not widespread, suggesting that any significant cost impact is many years off. Moreover, regulations governing high-deductible, consumer-directed health plans eligible for health savings accounts (HSAs) preclude some promising benefit design innovations and dilute the incentives in others. A movement away from a one-size-fits-all HSA benefit structure toward a more flexible design might broaden the appeal of HSA plans and enable them to incorporate features that promote cost-effective care.

78 FR 59924 - Centralized Capacity Markets in Regional Transmission Organizations and Independent System...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-09-30

... does the changing resource mix (i.e., increased reliance on natural gas-fired generation, increasing... resource planning policies, emerging technologies and fuels such as shale gas, price responsive demand and... design tools could prospectively augment, supplement or substitute for typical centralized capacity...

A Suite of GIS-Based Tools for Siting Low Impact Development in an Urban Watershed

EPA Science Inventory

Low impact development (LID) -- a comprehensive land use planning and design approach with the goal of mitigating development impacts on hydrologic/nutrient cycles and ecosystems -- is increasingly being touted as an effective approach to lessen overland runoff and pollutant load...

UNICOR: a species connectivity and corridor network simulator

Treesearch

E. L. Landguth; B. K. Hand; J. Glassy; S. A. Cushman; M. A. Sawaya

2012-01-01

We introduce UNIversal CORridor network simulator (UNICOR), a species connectivity and corridor identifi cation tool. UNICOR applies Dijkstra's shortest path algorithm to individual-based simulations. Outputs can be used to designate movement corridors, identify isolated populations, and prioritize conservation plans to promote species persistence. The key...

An Automated Treatment Plan Quality Control Tool for Intensity-Modulated Radiation Therapy Using a Voxel-Weighting Factor-Based Re-Optimization Algorithm.

PubMed

Song, Ting; Li, Nan; Zarepisheh, Masoud; Li, Yongbao; Gautier, Quentin; Zhou, Linghong; Mell, Loren; Jiang, Steve; Cerviño, Laura

2016-01-01

Intensity-modulated radiation therapy (IMRT) currently plays an important role in radiotherapy, but its treatment plan quality can vary significantly among institutions and planners. Treatment plan quality control (QC) is a necessary component for individual clinics to ensure that patients receive treatments with high therapeutic gain ratios. The voxel-weighting factor-based plan re-optimization mechanism has been proved able to explore a larger Pareto surface (solution domain) and therefore increase the possibility of finding an optimal treatment plan. In this study, we incorporated additional modules into an in-house developed voxel weighting factor-based re-optimization algorithm, which was enhanced as a highly automated and accurate IMRT plan QC tool (TPS-QC tool). After importing an under-assessment plan, the TPS-QC tool was able to generate a QC report within 2 minutes. This QC report contains the plan quality determination as well as information supporting the determination. Finally, the IMRT plan quality can be controlled by approving quality-passed plans and replacing quality-failed plans using the TPS-QC tool. The feasibility and accuracy of the proposed TPS-QC tool were evaluated using 25 clinically approved cervical cancer patient IMRT plans and 5 manually created poor-quality IMRT plans. The results showed high consistency between the QC report quality determinations and the actual plan quality. In the 25 clinically approved cases that the TPS-QC tool identified as passed, a greater difference could be observed for dosimetric endpoints for organs at risk (OAR) than for planning target volume (PTV), implying that better dose sparing could be achieved in OAR than in PTV. In addition, the dose-volume histogram (DVH) curves of the TPS-QC tool re-optimized plans satisfied the dosimetric criteria more frequently than did the under-assessment plans. In addition, the criteria for unsatisfied dosimetric endpoints in the 5 poor-quality plans could typically be satisfied when the TPS-QC tool generated re-optimized plans without sacrificing other dosimetric endpoints. In addition to its feasibility and accuracy, the proposed TPS-QC tool is also user-friendly and easy to operate, both of which are necessary characteristics for clinical use.

Exoplanet Yield Estimation for Decadal Study Concepts using EXOSIMS

NASA Astrophysics Data System (ADS)

Morgan, Rhonda; Lowrance, Patrick; Savransky, Dmitry; Garrett, Daniel

2016-01-01

The anticipated upcoming large mission study concepts for the direct imaging of exo-earths present an exciting opportunity for exoplanet discovery and characterization. While these telescope concepts would also be capable of conducting a broad range of astrophysical investigations, the most difficult technology challenges are driven by the requirements for imaging exo-earths. The exoplanet science yield for these mission concepts will drive design trades and mission concept comparisons.To assist in these trade studies, the Exoplanet Exploration Program Office (ExEP) is developing a yield estimation tool that emphasizes transparency and consistent comparison of various design concepts. The tool will provide a parametric estimate of science yield of various mission concepts using contrast curves from physics-based model codes and Monte Carlo simulations of design reference missions using realistic constraints, such as solar avoidance angles, the observatory orbit, propulsion limitations of star shades, the accessibility of candidate targets, local and background zodiacal light levels, and background confusion by stars and galaxies. The python tool utilizes Dmitry Savransky's EXOSIMS (Exoplanet Open-Source Imaging Mission Simulator) design reference mission simulator that is being developed for the WFIRST Preliminary Science program. ExEP is extending and validating the tool for future mission concepts under consideration for the upcoming 2020 decadal review. We present a validation plan and preliminary yield results for a point design.

Application of the user-centred design process according ISO 9241-210 in air traffic control.

PubMed

König, Christina; Hofmann, Thomas; Bruder, Ralph

2012-01-01

Designing a usable human machine interface for air traffic control is challenging and should follow approved methods. The ISO 9241-210 standard promises high usability of products by integrating future users and following an iterative process. This contribution describes the proceeding and first results of the analysis and application of ISO 9241-210 to develop a planning tool for air traffic controllers.

Ada (Trade Name) Foundation Technology. Volume 4. Software Requirements for WIS (WWMCCS (World Wide Military Command and Control System) Information System) Text Processing Prototypes

DTIC Science & Technology

1986-12-01

graphics : The package allows a character set which can be defined by users giving the picture for a character by designating its pixels. Such characters...type lonts and gsei-oriented "help" messages tailored to the operations being performed and user expertise In general, critical design issues...other volumes include command language, software design , description and analysis tools, database management system operating systems; planning and

Integrated Hybrid System Architecture for Risk Analysis

NASA Technical Reports Server (NTRS)

Moynihan, Gary P.; Fonseca, Daniel J.; Ray, Paul S.

2010-01-01

A conceptual design has been announced of an expert-system computer program, and the development of a prototype of the program, intended for use as a project-management tool. The program integrates schedule and risk data for the purpose of determining the schedule applications of safety risks and, somewhat conversely, the effects of changes in schedules on changes on safety. It is noted that the design has been delivered to a NASA client and that it is planned to disclose the design in a conference presentation.

Support to the Air Force Installation and Mission Support Center: Enabling AFIMSC’s Role in Agile Combat Support Planning, Execution, Monitoring, and Control

DTIC Science & Technology

2017-06-23

field of organizational design is that decisions should be made by those who have the necessary information, something AFIMSC does not yet have. See...data system designator , D087X. EXPRESS is the Air Force’s implemented version of the tool DRIVE, which was developed at RAND in the early 1990s. The...The UMMIPS system could also serve as a pattern. UMMIPS works by assigning a priority designator based on a force activity designator (FAD) (the

Design and implementation of a project-based active/cooperative engineering design course for freshmen

NASA Astrophysics Data System (ADS)

Abdulaal, R. M.; Al-Bahi, A. M.; Soliman, A. Y.; Iskanderani, F. I.

2011-08-01

A project-based active/cooperative design course is planned, implemented, assessed and evaluated to achieve several desired engineering outcomes. The course allows freshman-level students to gain professional hands-on engineering design experience through an opportunity to practise teamwork, quality principles, communication skills, life-long learning, realistic constraints and awareness of current domestic and global challenges. Throughout successive design reports and in-class assignments, the students are required by the end of the semester to communicate, clearly and concisely, the details of their design both orally and in writing through a functional artefact/prototype, a design notebook, an A0 project poster and a final oral presentation. In addition to these direct assessment tools, several indirect measures are used to ensure triangulation. Assignments are based on customer expectations using a detailed checklist. This paper shows the direct and indirect assessment tools that indicated a high level of achievement of course learning outcomes and a high level of student satisfaction.

Direct Bio-printing with Heterogeneous Topology Design.

PubMed

Ahsan, Amm Nazmul; Xie, Ruinan; Khoda, Bashir

2017-01-01

Bio-additive manufacturing is a promising tool to fabricate porous scaffold structures for expediting the tissue regeneration processes. Unlike the most traditional bulk material objects, the microstructures of tissue and organs are mostly highly anisotropic, heterogeneous, and porous in nature. However, modelling the internal heterogeneity of tissues/organs structures in the traditional CAD environment is difficult and oftentimes inaccurate. Besides, the de facto STL conversion of bio-models introduces loss of information and piles up more errors in each subsequent step (build orientation, slicing, tool-path planning) of the bio-printing process plan. We are proposing a topology based scaffold design methodology to accurately represent the heterogeneous internal architecture of tissues/organs. An image analysis technique is used that digitizes the topology information contained in medical images of tissues/organs. A weighted topology reconstruction algorithm is implemented to represent the heterogeneity with parametric functions. The parametric functions are then used to map the spatial material distribution. The generated information is directly transferred to the 3D bio-printer and heterogeneous porous tissue scaffold structure is manufactured without STL file. The proposed methodology is implemented to verify the effectiveness of the approach and the designed example structure is bio-fabricated with a deposition based bio-additive manufacturing system.

Tailored Prevention of Inpatient Falls

PubMed Central

ZUYEV, LYUBOV; BENOIT, ANGELA N.; CHANG, FRANK Y.; DYKES, PATRICIA C.

2011-01-01

Patient falls and fall-related injuries are serious problems in hospitals. The Fall TIPS application aims to prevent patient falls by translating routine nursing fall risk assessment into a decision support intervention that communicates fall risk status and creates a tailored evidence-based plan of care that is accessible to the care team, patients, and family members. In our design and implementation of the Fall TIPS toolkit, we used the Spiral Software Development Life Cycle model. Three output tools available to be generated from the toolkit are bed poster, plan of care, and patient education handout. A preliminary design of the application was based on initial requirements defined by project leaders and informed by focus groups with end users. Preliminary design partially simulated the paper version of the Morse Fall Scale currently used in hospitals involved in the research study. Strengths and weaknesses of the first prototype were identified by heuristic evaluation. Usability testing was performed at sites where research study is implemented. Suggestions mentioned by end users participating in usability studies were either directly incorporated into the toolkit and output tools, were slightly modified, or will be addressed during training. The next step is implementation of the fall prevention toolkit on the pilot testing units. PMID:20975543

Top-Mounted Propulsion Test Plans (TMP17)

NASA Technical Reports Server (NTRS)

Bridges, James; Henderson, Brenda; Huff, Dennis

2017-01-01

NASA recently completed a study of propulsion cycles and nozzle types applicable to a 70-passenger, M1.6 supersonic airliner, paying especial attention to the noise produced during landing and take-off. The results of the study were validated in a model-scale test at NASA Glenn last summer. The findings of that study and test, along with other studies, have resulted in a new strategy for achieving the Commercial Supersonic Technologys goals for noise and performance. Key to that strategy is moving the propulsion to the top-side of the vehicle and modifying the nozzle and inlet to maximally shield the propulsion noise while maintaining efficient operation. Installed exhaust configurations have been designed to minimize the exhaust noise using new acoustic design tools. A test planned for the fall of 2017 will validate both the new design tools and the low-noise concept using a new translating phased array. During the test, questions regarding modifications of convected waves in the jet near-field that are key to new understandings of aft jet noise will be addressed. Also, to better tie rig results to real-world measurements, a model-scale version of a nozzle that was flight tested by Glenn Research Center in 2001 will be tested.

Patient-specific dosimetric endpoints based treatment plan quality control in radiotherapy.

PubMed

Song, Ting; Staub, David; Chen, Mingli; Lu, Weiguo; Tian, Zhen; Jia, Xun; Li, Yongbao; Zhou, Linghong; Jiang, Steve B; Gu, Xuejun

2015-11-07

In intensity modulated radiotherapy (IMRT), the optimal plan for each patient is specific due to unique patient anatomy. To achieve such a plan, patient-specific dosimetric goals reflecting each patient's unique anatomy should be defined and adopted in the treatment planning procedure for plan quality control. This study is to develop such a personalized treatment plan quality control tool by predicting patient-specific dosimetric endpoints (DEs). The incorporation of patient specific DEs is realized by a multi-OAR geometry-dosimetry model, capable of predicting optimal DEs based on the individual patient's geometry. The overall quality of a treatment plan is then judged with a numerical treatment plan quality indicator and characterized as optimal or suboptimal. Taking advantage of clinically available prostate volumetric modulated arc therapy (VMAT) treatment plans, we built and evaluated our proposed plan quality control tool. Using our developed tool, six of twenty evaluated plans were identified as sub-optimal plans. After plan re-optimization, these suboptimal plans achieved better OAR dose sparing without sacrificing the PTV coverage, and the dosimetric endpoints of the re-optimized plans agreed well with the model predicted values, which validate the predictability of the proposed tool. In conclusion, the developed tool is able to accurately predict optimally achievable DEs of multiple OARs, identify suboptimal plans, and guide plan optimization. It is a useful tool for achieving patient-specific treatment plan quality control.

MTRETR MAINTENANCE SHOP, TRA653. FLOOR PLAN FOR FIRST FLOOR: MACHINE ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

MTR-ETR MAINTENANCE SHOP, TRA-653. FLOOR PLAN FOR FIRST FLOOR: MACHINE SHOP, ELECTRICAL AND INSTRUMENT SHOP, TOOL CRIB, ELECTRONIC SHOP, LOCKER ROOM, SPECIAL TEMPERATURE CONTROLLED ROOM, AND OFFICES. "NEW" ON DRAWING REFERS TO REVISION OF 11/1956 DRAWING ON WHICH AREAS WERE DESIGNATED AS "FUTURE." HUMMEL HUMMEL & JONES 810-MTR-ETR-653-A-7, 5/1957. INL INDEX NO. 532-0653-00-381-101839, REV. 2. - Idaho National Engineering Laboratory, Test Reactor Area, Materials & Engineering Test Reactors, Scoville, Butte County, ID

Development and pilot testing of a mobile health solution for asthma self-management: asthma action plan smartphone application pilot study.

PubMed

Licskai, Christopher; Sands, Todd W; Ferrone, Madonna

2013-01-01

Collaborative self-management is a core recommendation of national asthma guidelines; the written action plan is the knowledge tool that supports this objective. Mobile health technologies have the potential to enhance the effectiveness of the action plan as a knowledge translation tool. To design, develop and pilot a mobile health system to support asthma self-management. The present study was a prospective, single-centre, nonrandomized, pilot preintervention-postintervention analysis. System design and development were guided by an expert steering committee. The network included an agnostic web browser-based asthma action plan smartphone application (SPA). Subjects securely transmitted symptoms and peak flow data daily, and received automated control assessment, treatment advice and environmental alerts. Twenty-two adult subjects (mean age 47 years, 82% women) completed the study. Biophysical data were received on 84% of subject days (subject day = 1 subject × 1 day). Subjects viewed their action plan current zone of control on 54% and current air quality on 61% of subject days, 86% followed self-management advice and 50% acted to reduce exposure risks. A large majority affirmed ease of use, clarity and timeliness, and 95% desired SPA use after the study. At baseline, 91% had at least one symptom criterion for uncontrolled asthma and 64% had ≥2, compared with 45% (P=0.006) and 27% (P=0.022) at study close. Mean Asthma Quality of Life Questionnaire score improved from 4.3 to 4.8 (P=0.047). A dynamic, real-time, interactive, mobile health system with an integrated asthma action plan SPA can support knowledge translation at the patient and provider levels.

User-Centered Design of a Tablet Waiting Room Tool for Complex Patients to Prioritize Discussion Topics for Primary Care Visits.

PubMed

Lyles, Courtney R; Altschuler, Andrea; Chawla, Neetu; Kowalski, Christine; McQuillan, Deanna; Bayliss, Elizabeth; Heisler, Michele; Grant, Richard W

2016-09-14

Complex patients with multiple chronic conditions often face significant challenges communicating and coordinating with their primary care physicians. These challenges are exacerbated by the limited time allotted to primary care visits. Our aim was to employ a user-centered design process to create a tablet tool for use by patients for visit discussion prioritization. We employed user-centered design methods to create a tablet-based waiting room tool that enables complex patients to identify and set discussion topic priorities for their primary care visit. In an iterative design process, we completed one-on-one interviews with 40 patients and their 17 primary care providers, followed by three design sessions with a 12-patient group. We audiorecorded and transcribed all discussions and categorized major themes. In addition, we met with 15 key health communication, education, and technology leaders within our health system to further review the design and plan for broader implementation of the tool. In this paper, we present the significant changes made to the tablet tool at each phase of this design work. Patient feedback emphasized the need to make the tablet tool accessible for patients who lacked technical proficiency and to reduce the quantity and complexity of text presentation. Both patients and their providers identified specific content choices based on their personal experiences (eg, the ability to raise private or sensitive concerns) and recommended targeting new patients. Stakeholder groups provided essential input on the need to augment text with video and to create different versions of the videos to match sex and race/ethnicity of the actors with patients. User-centered design in collaboration with patients, providers, and key health stakeholders led to marked evolution in the initial content, layout, and target audience for a tablet waiting room tool intended to assist complex patients with setting visit discussion priorities.

Evidence that implementation intentions can overcome the effects of smoking habits.

PubMed

Armitage, Christopher J

2016-09-01

In this study, the aim was to (a) test for the first time whether implementation intentions formed outside the laboratory can overcome the effects of habits, and (b) see whether the operation of implementation intentions could be improved by asking people to form certain "when-then" plans as opposed to uncertain "if-then" plans. The study employed a 2 × 2 fully factorial design with baseline and follow-up measures of smoking status and habits. Smokers (N = 168; circa 33 years of age; 79 women, 89 men) were randomly allocated to 1 of 2 intervention groups to form either if-then plans or when-then plans using supporting tools, or to 1 of 2 control conditions in which they were exposed to identical supporting tools but were not asked to form if-then plans or when-then plans. Certainty did not affect the operation of implementation intentions, but smokers who formed implementation intentions were significantly more likely to quit, χ2(1, N = 168) = 8.86, p < .01, and the effect was mediated by changes in smoking habits (95% CI [0.02, 0.14]). Similar effects were observed when cigarettes smoked per day, nicotine dependence, and craving served as the dependent variables. The findings demonstrate that people who have formed implementation intentions can overcome habits, such as smoking, outside the laboratory. The supporting tools described in the present research could be deployed at low cost with high public health reach to support behavior change. (PsycINFO Database Record (c) 2016 APA, all rights reserved).

Computer-Based Tools for Evaluating Graphical User Interfaces

NASA Technical Reports Server (NTRS)

Moore, Loretta A.

1997-01-01

The user interface is the component of a software system that connects two very complex system: humans and computers. Each of these two systems impose certain requirements on the final product. The user is the judge of the usability and utility of the system; the computer software and hardware are the tools with which the interface is constructed. Mistakes are sometimes made in designing and developing user interfaces because the designers and developers have limited knowledge about human performance (e.g., problem solving, decision making, planning, and reasoning). Even those trained in user interface design make mistakes because they are unable to address all of the known requirements and constraints on design. Evaluation of the user inter-face is therefore a critical phase of the user interface development process. Evaluation should not be considered the final phase of design; but it should be part of an iterative design cycle with the output of evaluation being feed back into design. The goal of this research was to develop a set of computer-based tools for objectively evaluating graphical user interfaces. The research was organized into three phases. The first phase resulted in the development of an embedded evaluation tool which evaluates the usability of a graphical user interface based on a user's performance. An expert system to assist in the design and evaluation of user interfaces based upon rules and guidelines was developed during the second phase. During the final phase of the research an automatic layout tool to be used in the initial design of graphical inter- faces was developed. The research was coordinated with NASA Marshall Space Flight Center's Mission Operations Laboratory's efforts in developing onboard payload display specifications for the Space Station.

Assessing pre-service science teachers' technological pedagogical content knowledge (TPACK) through observations and lesson plans

NASA Astrophysics Data System (ADS)

Canbazoglu Bilici, Sedef; Selcen Guzey, S.; Yamak, Havva

2016-05-01

Background: Technological pedagogical content knowledge (TPACK) is critical for effective teaching with technology. However, generally science teacher education programs do not help pre-service teachers develop TPACK. Purpose: The purpose of this study was to assess pre-service science teachers' TPACK over a semester-long Science Methods. Sample: Twenty-seven pre-service science teachers took the course toward the end of their four-year teacher education program. Design and method: The study employed the case study methodology. Lesson plans and microteaching observations were used as data collection tools. Technological Pedagogical Content Knowledge-based lesson plan assessment instrument (TPACK-LpAI) and Technological Pedagogical Content Knowledge Observation Protocol (TPACK-OP) were used to analyze data obtained from observations and lesson plans. Results: The results showed that the TPACK-focused Science Methods course had an impact on pre-service teachers' TPACK to varying degrees. Most importantly, the course helped teachers gain knowledge of effective usage of educational technology tools. Conclusion: Teacher education programs should provide opportunities to pre-service teachers to develop their TPACK so that they can effectively integrate technology into their teaching.

Materials Genome Initiative

NASA Technical Reports Server (NTRS)

Vickers, John

2015-01-01

The Materials Genome Initiative (MGI) project element is a cross-Center effort that is focused on the integration of computational tools to simulate manufacturing processes and materials behavior. These computational simulations will be utilized to gain understanding of processes and materials behavior to accelerate process development and certification to more efficiently integrate new materials in existing NASA projects and to lead to the design of new materials for improved performance. This NASA effort looks to collaborate with efforts at other government agencies and universities working under the national MGI. MGI plans to develop integrated computational/experimental/ processing methodologies for accelerating discovery and insertion of materials to satisfy NASA's unique mission demands. The challenges include validated design tools that incorporate materials properties, processes, and design requirements; and materials process control to rapidly mature emerging manufacturing methods and develop certified manufacturing processes

Stress analysis and design considerations for Shuttle pointed autonomous research tool for astronomy /SPARTAN/

NASA Technical Reports Server (NTRS)

Ferragut, N. J.

1982-01-01

The Shuttle Pointed Autonomous Research Tool for Astronomy (SPARTAN) family of spacecraft are intended to operate with minimum interfaces with the U.S. Space Shuttle in order to increase flight opportunities. The SPARTAN I Spacecraft was designed to enhance structural capabilities and increase reliability. The approach followed results from work experience which evolved from sounding rocket projects. Structural models were developed to do the analyses necessary to satisfy safety requirements for Shuttle hardware. A loads analysis must also be performed. Stress analysis calculations will be performed on the main structural elements and subcomponents. Attention is given to design considerations and program definition, the schematic representation of a finite element model used for SPARTAN I spacecraft, details of loads analysis, the stress analysis, and fracture mechanics plan implications.

Designers' unified cost model

NASA Technical Reports Server (NTRS)

Freeman, W.; Ilcewicz, L.; Swanson, G.; Gutowski, T.

1992-01-01

The Structures Technology Program Office (STPO) at NASA LaRC has initiated development of a conceptual and preliminary designers' cost prediction model. The model will provide a technically sound method for evaluating the relative cost of different composite structural designs, fabrication processes, and assembly methods that can be compared to equivalent metallic parts or assemblies. The feasibility of developing cost prediction software in a modular form for interfacing with state-of-the-art preliminary design tools and computer aided design programs is being evaluated. The goal of this task is to establish theoretical cost functions that relate geometric design features to summed material cost and labor content in terms of process mechanics and physics. The output of the designers' present analytical tools will be input for the designers' cost prediction model to provide the designer with a database and deterministic cost methodology that allows one to trade and synthesize designs with both cost and weight as objective functions for optimization. This paper presents the team members, approach, goals, plans, and progress to date for development of COSTADE (Cost Optimization Software for Transport Aircraft Design Evaluation).

Design Tool for Planning Permanganate Injection Systems

DTIC Science & Technology

2010-08-01

Chemical Spill 10 CSTR continuously stirred tank reactors CT contact time EDB ethylene dibromide ESTCP Environmental Security Technology...63 6.2 Simulating Oxidant Distribution Using a Series of CSTRs ...ER- 0625. 6.2 SIMULATING OXIDANT DISTRIBUTION USING A SERIES OF CSTRS 6.2.1 MODEL DEVELOPMENT The transport and consumption of permanganate

Young and Old Serving Together: Meeting Community Needs through Intergenerational Partnerships.

ERIC Educational Resources Information Center

Scannell, Tess; Roberts, Angela

This document is designed to enlarge and expand the intergenerational community service mission and serve as a practical tool to anyone (including policymakers and program planning professionals) who wishes to learn about or start intergenerational community service programs (ICSPs). The following ICSP topics are discussed: rationale (building…

Using Performance Task Data to Improve Instruction

ERIC Educational Resources Information Center

Abbott, Amy L.; Wren, Douglas G.

2016-01-01

Two well-accepted ideas among educators are (a) performance assessment is an effective means of assessing higher-order thinking skills and (b) data-driven instruction planning is a valuable tool for optimizing student learning. This article describes a locally developed performance task (LDPT) designed to measure critical thinking, problem…

Mapping International Cancer Activities – Global Cancer Project Map Launch

Cancer.gov

CGH’s Dr. Sudha Sivaram, Dr. Makeda Williams, and Ms. Kalina Duncan have partnered with Drs. Ami Bhatt and Franklin Huang at Global Oncology, Inc. (GO) to develop the Global Cancer Project Map - a web-based tool designed to facilitate cancer research and control activity planning.

A new tool that links landscale connectivity and source-sink dynamics to population viability

EPA Science Inventory

The importance of connectivity and source-sink dynamics to conservation planning is widely appreciated. But the use of these concepts in practical applications such as the identification of critical habitat has been slowed because few models are designed to identify demographic s...

Successful Strategies for Planning a Green Building.

ERIC Educational Resources Information Center

Browning, William D.

2003-01-01

Presents several strategies for successful green building on campus: develop a set of clear environmental performance goals (buildings as pedagogical tools, climate-neutral operations, maximized human performance), use Leadership in Energy and Environmental Design (LEED) as a gauge of performance, and use the project to reform the campus building…

Exploring Literature through Films. Project ELF.

ERIC Educational Resources Information Center

Los Angeles County Office of Education, Downey, CA.

Noting that instructional films can serve as a valuable tool to motivate students and to help them organize, interpret, and evaluate concepts presented, this program guide is designed to assist teachers in planning instructional activities that will effectively integrate films into the English language arts curriculum. The first section of the…

Simulation tools for design of the next gseneration of milk processing plants

USDA-ARS?s Scientific Manuscript database

A growing number of food retailers have incorporated environmental sustainability into their business plans and are concerned about the greenhouse gas emissions (GHG) and the carbon footprint associated with the fluid milk value chain. The fluid milk value chain begins on the farm with crop product...

Title V Delinquency Prevention Program. Community Self-Evaluation Workbook.

ERIC Educational Resources Information Center

Caliber Associates, Fairfax, VA.

This workbook is designed to help communities and program administrators assess the success of their Title V delinquency prevention programs, but it may serve as an evaluation tool for other prevention efforts as well. It provides information and resource aids on program planning, conducting evaluations, tracking programs, describing activities,…

Interactive Radio Counseling in Indira Gandhi National Open University: A Study.

ERIC Educational Resources Information Center

Chaudhary, Sohanvir S.; Bansal, Kiron

2000-01-01

Explains interactive radio as an effective tool for open and distance learning provided it is planned, designed, implemented, and monitored systematically. Describes the interactive radio counseling at Indira Gandhi National Open University (IGNOU) that provides support to students who study print material and may attend weekend…

Monitoring components of GypsES

Treesearch

Lukas P. Schaub; F. William Ravlin; Jesse A. Logan; Shelby J. Fleischer

1991-01-01

The manager needs tools for assistance in planning and interpreting monitoring systems. We are building a system that designs sampling programs by interpreting data about Gypsy Moth, stand condition and management objectives. The system prioritizes areas within the management unit within budgetary constraints and defines the areas to be monitored. The system proposes...

Thinning Guidelines For Southern Bottomland Hardwood Forests

Treesearch

James S. Meadows

1996-01-01

Thinnings, improvement cuttings, and other partial cuttings in southern bottomland hardwood forests are generally designed to enhance the growth and development of those species favored for management objectives. Hardwood tree classes and stocking guides can be used as tools to aid in planning and conducting partial cuttings in hardwood forests. Two disadvantages...

Knowledge Management ERP Curriculum Design/Mapping (Theory and Development Tools)

ERIC Educational Resources Information Center

Swanson, Zane; Hepner, Michelle

2011-01-01

This study proposes a knowledge management framework for developing and managing enterprise resource planning (ERP) curriculum within business schools. Both theory and a practical implementation are addressed. The knowledge management (KM) framework has two components which utilize ERP from a big picture curriculum overview and a ground level…

Tools for valuing tree and park services

Treesearch

E.G. McPherson

2010-01-01

Arborists and urban foresters plan, design, construct, and manage trees and parks in cities throughout the world. These civic improvements create walkable, cool environments, save energy, reduce stormwater runoff, sequester carbon dioxide, and absorb air pollutants. The presence of trees and green spaces in cities is associated with increases in property values,...

The RN-BSN Bridge Course: Transitioning the Re-Entry Learner.

ERIC Educational Resources Information Center

Huston, Carol; Shovein, Julia; Damazo, Becky; Fox, Sherry

2001-01-01

A 6-week bridge course designed to ease the transition of registered nurses into baccalaureate degree programs focused on critical thinking, learning styles, professional roles, values clarification, time management, and career planning. It also oriented students to Web Course Tools, used for distance learning. Outcomes included role and campus…

Model Educational Specifications for Technology in Schools.

ERIC Educational Resources Information Center

Maryland State Dept. of Education, College Park. Office of Administration and Finance.

This description of the Model Edspec, which can be used by itself or in conjunction with the "Format Guide of Educational Specifications," serves as a comprehensive planning tool for the selection and application of technology. The model is designed to assist schools in implementing the facilities development process, thereby making…

Creating a Classroom Kaleidoscope with the World Wide Web.

ERIC Educational Resources Information Center

Quinlan, Laurie A.

1997-01-01

Discusses the elements of classroom Web presentations: planning; construction, including design tips; classroom use; and assessment. Lists 14 World Wide Web resources for K-12 teachers; Internet search tools (directories, search engines and meta-search engines); a Web glossary; and an example of HTML for a simple Web page. (PEN)

Integrating payload design, planning, and control in the Dutch Utilisation Centre

NASA Technical Reports Server (NTRS)

Grant, T. J.

1993-01-01

Spacecraft payload design, experiment planning and scheduling, and payload control are traditionally separate areas of activity. This paper describes the development of a prototype software tool--the Activity Scheduling System (ASS)--which integrates these activity areas. ASS is part of a larger project to build a Dutch Utilisation Centre (DUC), intended eventually to support all space utilization activities in The Netherlands. ASS has been tested on the High Performance Capillary Electrophoresis payload. The paper outlines the integrated preparation and operations concept embodied in ASS. It describes the ASS prototype, including a typical session. The results of testing are summarized. Possible enhancement of ASS, including integration into DUC, is sketched.

Decision-support tools for Extreme Weather and Climate Events in the Northeast United States

NASA Astrophysics Data System (ADS)

Kumar, S.; Lowery, M.; Whelchel, A.

2013-12-01

Decision-support tools were assessed for the 2013 National Climate Assessment technical input document, "Climate Change in the Northeast, A Sourcebook". The assessment included tools designed to generate and deliver actionable information to assist states and highly populated urban and other communities in assessment of climate change vulnerability and risk, quantification of effects, and identification of adaptive strategies in the context of adaptation planning across inter-annual, seasonal and multi-decadal time scales. State-level adaptation planning in the Northeast has generally relied on qualitative vulnerability assessments by expert panels and stakeholders, although some states have undertaken initiatives to develop statewide databases to support vulnerability assessments by urban and local governments, and state agencies. The devastation caused by Superstorm Sandy in October 2012 has raised awareness of the potential for extreme weather events to unprecedented levels and created urgency for action, especially in coastal urban and suburban communities that experienced pronounced impacts - especially in New Jersey, New York and Connecticut. Planning approaches vary, but any adaptation and resiliency planning process must include the following: - Knowledge of the probable change in a climate variable (e.g., precipitation, temperature, sea-level rise) over time or that the climate variable will attain a certain threshold deemed to be significant; - Knowledge of intensity and frequency of climate hazards (past, current or future events or conditions with potential to cause harm) and their relationship with climate variables; - Assessment of climate vulnerabilities (sensitive resources, infrastructure or populations exposed to climate-related hazards); - Assessment of relative risks to vulnerable resources; - Identification and prioritization of adaptive strategies to address risks. Many organizations are developing decision-support tools to assist in the urban planning process by addressing some of these needs. In this paper we highlight the decision tools available today, discuss their application in selected case studies, and present a gap analysis with opportunities for innovation and future work.

Testing, Requirements, and Metrics

NASA Technical Reports Server (NTRS)

Rosenberg, Linda; Hyatt, Larry; Hammer, Theodore F.; Huffman, Lenore; Wilson, William

1998-01-01

The criticality of correct, complete, testable requirements is a fundamental tenet of software engineering. Also critical is complete requirements based testing of the final product. Modern tools for managing requirements allow new metrics to be used in support of both of these critical processes. Using these tools, potential problems with the quality of the requirements and the test plan can be identified early in the life cycle. Some of these quality factors include: ambiguous or incomplete requirements, poorly designed requirements databases, excessive or insufficient test cases, and incomplete linkage of tests to requirements. This paper discusses how metrics can be used to evaluate the quality of the requirements and test to avoid problems later. Requirements management and requirements based testing have always been critical in the implementation of high quality software systems. Recently, automated tools have become available to support requirements management. At NASA's Goddard Space Flight Center (GSFC), automated requirements management tools are being used on several large projects. The use of these tools opens the door to innovative uses of metrics in characterizing test plan quality and assessing overall testing risks. In support of these projects, the Software Assurance Technology Center (SATC) is working to develop and apply a metrics program that utilizes the information now available through the application of requirements management tools. Metrics based on this information provides real-time insight into the testing of requirements and these metrics assist the Project Quality Office in its testing oversight role. This paper discusses three facets of the SATC's efforts to evaluate the quality of the requirements and test plan early in the life cycle, thus preventing costly errors and time delays later.

Chapter 8: Planning Tools to Simulate and Optimize Neighborhood Energy Systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhivov, Alexander Michael; Case, Michael Patrick; Jank, Reinhard

This section introduces different energy modeling tools available in Europe and the USA for community energy master planning process varying from strategic Urban Energy Planning to more detailed Local Energy Planning. Two modeling tools used for Energy Master Planning of primarily residential communities, the 3D city model with CityGML, and the Net Zero Planner tool developed for the US Department of Defense installations are described in more details.

Effects of Planning on Task Load, Knowledge, and Tool Preference: A Comparison of Two Tools

ERIC Educational Resources Information Center

Bonestroo, Wilco J.; de Jong, Ton

2012-01-01

Self-regulated learners are expected to plan their own learning. Because planning is a complex task, it is not self-evident that all learners can perform this task successfully. In this study, we examined the effects of two planning support tools on the quality of created plans, planning behavior, task load, and acquired knowledge. Sixty-five…

Factors affecting strategic plan implementation using interpretive structural modeling (ISM).

PubMed

Bahadori, Mohammadkarim; Teymourzadeh, Ehsan; Tajik, Hamidreza; Ravangard, Ramin; Raadabadi, Mehdi; Hosseini, Seyed Mojtaba

2018-06-11

Purpose Strategic planning is the best tool for managers seeking an informed presence and participation in the market without surrendering to changes. Strategic planning enables managers to achieve their organizational goals and objectives. Hospital goals, such as improving service quality and increasing patient satisfaction cannot be achieved if agreed strategies are not implemented. The purpose of this paper is to investigate the factors affecting strategic plan implementation in one teaching hospital using interpretive structural modeling (ISM). Design/methodology/approach The authors used a descriptive study involving experts and senior managers; 16 were selected as the study sample using a purposive sampling method. Data were collected using a questionnaire designed and prepared based on previous studies. Data were analyzed using ISM. Findings Five main factors affected strategic plan implementation. Although all five variables and factors are top level, "senior manager awareness and participation in the strategic planning process" and "creating and maintaining team participation in the strategic planning process" had maximum drive power. "Organizational structure effects on the strategic planning process" and "Organizational culture effects on the strategic planning process" had maximum dependence power. Practical implications Identifying factors affecting strategic plan implementation is a basis for healthcare quality improvement by analyzing the relationship among factors and overcoming the barriers. Originality/value The authors used ISM to analyze the relationship between factors affecting strategic plan implementation.

Mission Options Scoping Tool for Mars Orbiters: Mass Cost Calculator (MC2)

NASA Technical Reports Server (NTRS)

Sturm, Eric J., II; Deutsch, Marie-Jose; Harmon, Corey; Nakagawa, Roy; Kinsey, Robert; Lopez, Nino; Kudrle, Paul; Evans, Alex

2007-01-01

Prior to developing the details of an advanced mission study, the mission architecture trade space is typically explored to assess the scope of feasible options. This paper describes the main features of an Excel-based tool, called the Mass-Cost-Calculator (MC2 ), which is used to perform rapid, high-level mass and cost options analyses of Mars orbiter missions. MC2 consists of a combination of databases, analytical solutions, and parametric relationships to enable quick evaluation of new mission concepts and comparison of multiple architecture options. The tool's outputs provide program management and planning teams with answers to "what if" queries, as well as an understanding of the driving mission elements, during the pre-project planning phase. These outputs have been validated against the outputs generated by the Advanced Projects Design Team (Team X) at NASA's Jet Propulsion Laboratory (JPL). The architecture of the tool allows for future expansion to other orbiters beyond Mars, and to non-orbiter missions, such as those involving fly-by spacecraft, probes, landers, rovers, or other mission elements.

Empowering districts to target priorities for improving child health service in Uganda using change management and rapid assessment methods

PubMed Central

Odaga, John; Henriksson, Dorcus K.; Nkolo, Charles; Tibeihaho, Hector; Musabe, Richard; Katusiime, Margaret; Sinabulya, Zaccheus; Mucunguzi, Stephen; Mbonye, Anthony K.; Valadez, Joseph J.

2016-01-01

Background Local health system managers in low- and middle-income countries have the responsibility to set health priorities and allocate resources accordingly. Although tools exist to aid this process, they are not widely applied for various reasons including non-availability, poor knowledge of the tools, and poor adaptability into the local context. In Uganda, delivery of basic services is devolved to the District Local Governments through the District Health Teams (DHTs). The Community and District Empowerment for Scale-up (CODES) project aims to provide a set of management tools that aid contextualised priority setting, fund allocation, and problem-solving in a systematic way to improve effective coverage and quality of child survival interventions. Design Although the various tools have previously been used at the national level, the project aims to combine them in an integral way for implementation at the district level. These tools include Lot Quality Assurance Sampling (LQAS) surveys to generate local evidence, Bottleneck analysis and Causal analysis as analytical tools, Continuous Quality Improvement, and Community Dialogues based on Citizen Report Cards and U reports. The tools enable identification of gaps, prioritisation of possible solutions, and allocation of resources accordingly. This paper presents some of the tools used by the project in five districts in Uganda during the proof-of-concept phase of the project. Results All five districts were trained and participated in LQAS surveys and readily adopted the tools for priority setting and resource allocation. All districts developed health operational work plans, which were based on the evidence and each of the districts implemented more than three of the priority activities which were included in their work plans. Conclusions In the five districts, the CODES project demonstrated that DHTs can adopt and integrate these tools in the planning process by systematically identifying gaps and setting priority interventions for child survival. PMID:27225791

Integrated risk management

NASA Technical Reports Server (NTRS)

Hunsucker, J. L.

1993-01-01

The purpose of this report is to first present a basis or foundation for the building of an integrated risk management plan and them to present the plan. The integration referred to is across both the temporal and the hierarchical dimensions. Complexity, consequence, and credibility seem to be driving the need for the consideration of risk. Reduction of personal bias and reproducibility of the decision making process seem to be driving the consideration of a formal risk plan. While risk can be used as either a selection tool or a control tool, this paper concentrates on the selection usage. Risk relies on stated purpose. The tightness of the definition of purpose and success is directly reflected in the definition and control of risk. Much of a risk management plan could be designed by the answers to the questions of why, what, who, when, and where. However, any plan must provide the following information about a threat or risk: likelihood, consequence, predictability, reliability, and reproducibility. While the environment at NASA is seen as warm, but not hot, for the introduction of a risk program, some encouragement is seen if the following problems are addressed: no champion, no commitment of resource, confused definitions, lack of direction and focus, a hard sell, NASA culture, many choices of assessment methods, and cost. The plan is designed to follow the normal method of doing work and is structured to follow either the work break down structure or a functional structure very well. The parts of the plan include: defining purpose and success, initial threat assessment, initial risk assessment, reconciling threats and parameters, putting part of the information down and factoring the information back into the decision process as it comes back up, and developing inferences. Two major suggestions are presented. One is to build an office of risk management to be used as a resource by managers in doing the risk process. Another is to form a pilot program to try out the details in the plan and modify the method where needed.

Planning Coverage Campaigns for Mission Design and Analysis: CLASP for DESDynl

NASA Technical Reports Server (NTRS)

Knight, Russell L.; McLaren, David A.; Hu, Steven

2013-01-01

Mission design and analysis presents challenges in that almost all variables are in constant flux, yet the goal is to achieve an acceptable level of performance against a concept of operations, which might also be in flux. To increase responsiveness, automated planning tools are used that allow for the continual modification of spacecraft, ground system, staffing, and concept of operations, while returning metrics that are important to mission evaluation, such as area covered, peak memory usage, and peak data throughput. This approach was applied to the DESDynl mission design using the CLASP planning system, but since this adaptation, many techniques have changed under the hood for CLASP, and the DESDynl mission concept has undergone drastic changes. The software produces mission evaluation products, such as memory highwater marks, coverage percentages, given a mission design in the form of coverage targets, concept of operations, spacecraft parameters, and orbital parameters. It tries to overcome the lack of fidelity and timeliness of mission requirements coverage analysis during mission design. Previous techniques primarily use Excel in ad hoc fashion to approximate key factors in mission performance, often falling victim to overgeneralizations necessary in such an adaptation. The new program allows designers to faithfully represent their mission designs quickly, and get more accurate results just as quickly.

Climate-Smart Design for Ecosystem Management: A Test Application for Coral Reefs.

PubMed

West, Jordan M; Courtney, Catherine A; Hamilton, Anna T; Parker, Britt A; Julius, Susan H; Hoffman, Jennie; Koltes, Karen H; MacGowan, Petra

2017-01-01

The interactive and cumulative impacts of climate change on natural resources such as coral reefs present numerous challenges for conservation planning and management. Climate change adaptation is complex due to climate-stressor interactions across multiple spatial and temporal scales. This leaves decision makers worldwide faced with local, regional, and global-scale threats to ecosystem processes and services, occurring over time frames that require both near-term and long-term planning. Thus there is a need for structured approaches to adaptation planning that integrate existing methods for vulnerability assessment with design and evaluation of effective adaptation responses. The Corals and Climate Adaptation Planning project of the U.S. Coral Reef Task Force seeks to develop guidance for improving coral reef management through tailored application of a climate-smart approach. This approach is based on principles from a recently-published guide which provides a framework for adopting forward-looking goals, based on assessing vulnerabilities to climate change and applying a structured process to design effective adaptation strategies. Work presented in this paper includes: (1) examination of the climate-smart management cycle as it relates to coral reefs; (2) a compilation of adaptation strategies for coral reefs drawn from a comprehensive review of the literature; (3) in-depth demonstration of climate-smart design for place-based crafting of robust adaptation actions; and (4) feedback from stakeholders on the perceived usefulness of the approach. We conclude with a discussion of lessons-learned on integrating climate-smart design into real-world management planning processes and a call from stakeholders for an "adaptation design tool" that is now under development.

Planning Multitechnology Access Networks with Performance Constraints

NASA Astrophysics Data System (ADS)

Chamberland, Steven

Considering the number of access network technologies and the investment needed for the “last mile” of a solution, in today’s highly competitive markets, planning tools are crucial for the service providers to optimize the network costs and accelerate the planning process. In this paper, we propose to tackle the problem of planning access networks composed of four technologies/architectures: the digital subscriber line (xDSL) technologies deployed directly from the central office (CO), the fiber-to-the-node (FTTN), the fiber-to-the-micro-node (FTTn) and the fiber-to-the-premises (FTTP). A mathematical programming model is proposed for this planning problem that is solved using a commercial implementation of the branch-and-bound algorithm. Next, a detailed access network planning example is presented followed by a systematic set of experiments designed to assess the performance of the proposed approach.

Undersea applications of dexterous robotics

NASA Technical Reports Server (NTRS)

Gittleman, Mark M.

1994-01-01

The revolution and application of dexterous robotics in the undersea energy production industry and how this mature technology has affected planned SSF dexterous robotic tasks are examined. Undersea telerobotics, or Remotely Operated Vehicles (ROV's), have evolved in design and use since the mid-1970s. Originally developed to replace commercial divers for both planned and unplanned tasks, they are now most commonly used to perform planned robotic tasks in all phases of assembly, inspection, and maintenance of undersea structures and installations. To accomplish these tasks, the worksites, the tasks themselves, and the tools are now engineered with both the telerobot's and the diver's capabilities in mind. In many cases, this planning has permitted a reduction in telerobot system complexity and cost. The philosophies and design practices that have resulted in the successful incorporation of telerobotics into the highly competitive and cost conscious offshore production industry have been largely ignored in the space community. Cases where these philosophies have been adopted or may be successfully adopted in the near future are explored.

Methods and Tools for Ethical Usability

NASA Astrophysics Data System (ADS)

Kavathatzopoulos, Iordanis; Kostrzewa, Agata; Laaksoharju, Mikael

The objectives of the tutorial are to provide knowledge of basic ethical, psychological and organizational theories that are relevant to consider ethical aspects during design and use of IT systems; knowledge and skills about handling and solving ethical problems in connection with design and use of IT-systems; and skills in using questionnaires, surveys, interviews and the like in connection with software development and IT-use. It contains lectures, workshop and exercises; use of special tools to identify and consider IT ethical issues during planning, construction, installation and use of IT systems; and group exercises where the participants train their ethical skills on IT ethical conflicts and problems. Intended participants are system developers, purchasers, usability experts, academics, HCI teachers.

Map Sensitivity vs. Map Dependency: A Case Study of Subway Maps’ Impact on Passenger Route Choices in Washington DC

PubMed Central

Xu, John

2017-01-01

This paper addresses the key assumption in behavioral and transportation planning literature that, when people use a transit system more frequently, they become less dependent on and less sensitive to transit maps in their decision-making. Therefore, according to this assumption, map changes are much less impactful to travel decisions of frequent riders than to that of first-time or new passengers. This assumption—though never empirically validated—has been the major hurdle for transit maps to becoming a planning tool to change passengers’ behavior. This paper examines this assumption using the Washington DC metro map as a case study by conducting a route choice experiment between 30 Origin-Destination (O-D) pairs on seven metro map designs. The experiment targets two types of passengers: frequent metro riders through advertisements on a free daily newspaper available at DC metro stations, and general residents in the Washington metropolitan area through Amazon Mechanical Turk, an online crowdsourcing platform. A total of 255 and 371 participants made 2024 and 2960 route choices in the respective experiments. The results show that frequent passengers are in fact more sensitive to subtle changes in map design than general residents who are less likely to be familiar with the metro map and therefore unaffected by map changes presented in the alternative designs. The work disproves the aforementioned assumption and further validates metro maps as an effective planning tool in transit systems. PMID:29068371

An Automated Treatment Plan Quality Control Tool for Intensity-Modulated Radiation Therapy Using a Voxel-Weighting Factor-Based Re-Optimization Algorithm

PubMed Central

Song, Ting; Li, Nan; Zarepisheh, Masoud; Li, Yongbao; Gautier, Quentin; Zhou, Linghong; Mell, Loren; Jiang, Steve; Cerviño, Laura

2016-01-01

Intensity-modulated radiation therapy (IMRT) currently plays an important role in radiotherapy, but its treatment plan quality can vary significantly among institutions and planners. Treatment plan quality control (QC) is a necessary component for individual clinics to ensure that patients receive treatments with high therapeutic gain ratios. The voxel-weighting factor-based plan re-optimization mechanism has been proved able to explore a larger Pareto surface (solution domain) and therefore increase the possibility of finding an optimal treatment plan. In this study, we incorporated additional modules into an in-house developed voxel weighting factor-based re-optimization algorithm, which was enhanced as a highly automated and accurate IMRT plan QC tool (TPS-QC tool). After importing an under-assessment plan, the TPS-QC tool was able to generate a QC report within 2 minutes. This QC report contains the plan quality determination as well as information supporting the determination. Finally, the IMRT plan quality can be controlled by approving quality-passed plans and replacing quality-failed plans using the TPS-QC tool. The feasibility and accuracy of the proposed TPS-QC tool were evaluated using 25 clinically approved cervical cancer patient IMRT plans and 5 manually created poor-quality IMRT plans. The results showed high consistency between the QC report quality determinations and the actual plan quality. In the 25 clinically approved cases that the TPS-QC tool identified as passed, a greater difference could be observed for dosimetric endpoints for organs at risk (OAR) than for planning target volume (PTV), implying that better dose sparing could be achieved in OAR than in PTV. In addition, the dose-volume histogram (DVH) curves of the TPS-QC tool re-optimized plans satisfied the dosimetric criteria more frequently than did the under-assessment plans. In addition, the criteria for unsatisfied dosimetric endpoints in the 5 poor-quality plans could typically be satisfied when the TPS-QC tool generated re-optimized plans without sacrificing other dosimetric endpoints. In addition to its feasibility and accuracy, the proposed TPS-QC tool is also user-friendly and easy to operate, both of which are necessary characteristics for clinical use. PMID:26930204

MAPGEN: Mixed-Initiative Activity Planning for the Mars Exploration Rover Mission

NASA Technical Reports Server (NTRS)

Ai-Chang, Mitchell; Bresina, John; Hsu, Jennifer; Jonsson, Ari; Kanefsky, Bob; McCurdy, Michael; Morris, Paul; Rajan, Kanna; Vera, Alonso; Yglesias, Jeffrey

2004-01-01

This document describes the Mixed initiative Activity Plan Generation system MAPGEN. This system is one of the critical tools in the Mars Exploration Rover mission surface operations, where it is used to build activity plans for each of the rovers, each Martian day. The MAPGEN system combines an existing tool for activity plan editing and resource modeling, with an advanced constraint-based reasoning and planning framework. The constraint-based planning component provides active constraint and rule enforcement, automated planning capabilities, and a variety of tools and functions that are useful for building activity plans in an interactive fashion. In this demonstration, we will show the capabilities of the system and demonstrate how the system has been used in actual Mars rover operations. In contrast to the demonstration given at ICAPS 03, significant improvement have been made to the system. These include various additional capabilities that are based on automated reasoning and planning techniques, as well as a new Constraint Editor support tool. The Constraint Editor (CE) as part of the process for generating these command loads, the MAPGEN tool provides engineers and scientists an intelligent activity planning tool that allows them to more effectively generate complex plans that maximize the science return each day. The key to the effectiveness of the MAPGEN tool is an underlying constraint-based planning and reasoning engine.

Overview of Hazard Assessment and Emergency Planning Software of Use to RN First Responders

DOE Office of Scientific and Technical Information (OSTI.GOV)

Waller, E; Millage, K; Blakely, W F

2008-08-26

There are numerous software tools available for field deployment, reach-back, training and planning use in the event of a radiological or nuclear (RN) terrorist event. Specialized software tools used by CBRNe responders can increase information available and the speed and accuracy of the response, thereby ensuring that radiation doses to responders, receivers, and the general public are kept as low as reasonably achievable. Software designed to provide health care providers with assistance in selecting appropriate countermeasures or therapeutic interventions in a timely fashion can improve the potential for positive patient outcome. This paper reviews various software applications of relevance tomore » radiological and nuclear (RN) events that are currently in use by first responders, emergency planners, medical receivers, and criminal investigators.« less

A Flight Deck Decision Support Tool for Autonomous Airborne Operations

NASA Technical Reports Server (NTRS)

Ballin, Mark G.; Sharma, Vivek; Vivona, Robert A.; Johnson, Edward J.; Ramiscal, Ermin

2002-01-01

NASA is developing a flight deck decision support tool to support research into autonomous operations in a future distributed air/ground traffic management environment. This interactive real-time decision aid, referred to as the Autonomous Operations Planner (AOP), will enable the flight crew to plan autonomously in the presence of dense traffic and complex flight management constraints. In assisting the flight crew, the AOP accounts for traffic flow management and airspace constraints, schedule requirements, weather hazards, aircraft operational limits, and crew or airline flight-planning goals. This paper describes the AOP and presents an overview of functional and implementation design considerations required for its development. Required AOP functionality is described, its application in autonomous operations research is discussed, and a prototype software architecture for the AOP is presented.

Integrated Campaign Probabilistic Cost, Schedule, Performance, and Value for Program Office Support

NASA Technical Reports Server (NTRS)

Cornelius, David; Sasamoto, Washito; Daugherty, Kevin; Deacon, Shaun

2012-01-01

This paper describes an integrated assessment tool developed at NASA Langley Research Center that incorporates probabilistic analysis of life cycle cost, schedule, launch performance, on-orbit performance, and value across a series of planned space-based missions, or campaign. Originally designed as an aid in planning the execution of missions to accomplish the National Research Council 2007 Earth Science Decadal Survey, it utilizes Monte Carlo simulation of a series of space missions for assessment of resource requirements and expected return on investment. Interactions between simulated missions are incorporated, such as competition for launch site manifest, to capture unexpected and non-linear system behaviors. A novel value model is utilized to provide an assessment of the probabilistic return on investment. A demonstration case is discussed to illustrate the tool utility.

A Summary Description of a Computer Program Concept for the Design and Simulation of Solar Pond Electric Power Generation Systems

NASA Technical Reports Server (NTRS)

1984-01-01

A solar pond electric power generation subsystem, an electric power transformer and switch yard, a large solar pond, a water treatment plant, and numerous storage and evaporation ponds. Because a solar pond stores thermal energy over a long period of time, plant operation at any point in time is dependent upon past operation and future perceived generation plans. This time or past history factor introduces a new dimension in the design process. The design optimization of a plant must go beyond examination of operational state points and consider the seasonal variations in solar, solar pond energy storage, and desired plant annual duty-cycle profile. Models or design tools will be required to optimize a plant design. These models should be developed in order to include a proper but not excessive level of detail. The model should be targeted to a specific objective and not conceived as a do everything analysis tool, i.e., system design and not gradient-zone stability.

The role of locally-designed organizational artifacts in supporting nurses’ work: an ethnographic study on the wards

PubMed

Talamo, Alessandra; Mellini, Barbara; Barbieri, Barbara

2017-01-01

This paper aims to describe how nurses' planning and coordination work is performed through the use of locally designed tools (i.e., diaries, planners, reminders, and organizers). These tools are investigated as the materialization of organizational work, thus offering a complementary perspective on nursing practice to that proposed by the professional mandate and supported by official artifacts in use. Ethnographic study. By analyzing locally designed artifacts, the rationale that enables nurses to make the flow of activities work is highlighted and explained. Evidence is provided by a description of how nurses' tacit knowledge is reified and embedded into objects produced by the nurses themselves. Implications for the design of digital systems supporting nursing practice are discussed. The analysis of these artifacts has allowed an understanding of practices used by the nurses to manage the workflow in the wards.

Workflow Agents vs. Expert Systems: Problem Solving Methods in Work Systems Design

NASA Technical Reports Server (NTRS)

Clancey, William J.; Sierhuis, Maarten; Seah, Chin

2009-01-01

During the 1980s, a community of artificial intelligence researchers became interested in formalizing problem solving methods as part of an effort called "second generation expert systems" (2nd GES). How do the motivations and results of this research relate to building tools for the workplace today? We provide an historical review of how the theory of expertise has developed, a progress report on a tool for designing and implementing model-based automation (Brahms), and a concrete example how we apply 2nd GES concepts today in an agent-based system for space flight operations (OCAMS). Brahms incorporates an ontology for modeling work practices, what people are doing in the course of a day, characterized as "activities." OCAMS was developed using a simulation-to-implementation methodology, in which a prototype tool was embedded in a simulation of future work practices. OCAMS uses model-based methods to interactively plan its actions and keep track of the work to be done. The problem solving methods of practice are interactive, employing reasoning for and through action in the real world. Analogously, it is as if a medical expert system were charged not just with interpreting culture results, but actually interacting with a patient. Our perspective shifts from building a "problem solving" (expert) system to building an actor in the world. The reusable components in work system designs include entire "problem solvers" (e.g., a planning subsystem), interoperability frameworks, and workflow agents that use and revise models dynamically in a network of people and tools. Consequently, the research focus shifts so "problem solving methods" include ways of knowing that models do not fit the world, and ways of interacting with other agents and people to gain or verify information and (ultimately) adapt rules and procedures to resolve problematic situations.

Formulation of consumables management models. Development approach for the mission planning processor working model

NASA Technical Reports Server (NTRS)

Connelly, L. C.

1977-01-01

The mission planning processor is a user oriented tool for consumables management and is part of the total consumables subsystem management concept. The approach to be used in developing a working model of the mission planning processor is documented. The approach includes top-down design, structured programming techniques, and application of NASA approved software development standards. This development approach: (1) promotes cost effective software development, (2) enhances the quality and reliability of the working model, (3) encourages the sharing of the working model through a standard approach, and (4) promotes portability of the working model to other computer systems.

Meeting IYA Goals for Diverse Science Center and Planetarium Audiences

NASA Astrophysics Data System (ADS)

Nichols Yehling, Michelle; Carney, K.

2008-05-01

The International Year of Astronomy provides the Adler Planetarium in Chicago, IL with a chance to bring astronomy into the greater Chicagoland area. 1) The presenters will outline Adler's program plans to date, from community outreach programs such as Café Scientifique and citizen science light pollution observations, to programs within the institution, like a temporary exhibit about how telescopes have shaped our understanding of the cosmos. The presenters will focus on the range of programming and how this suite of programs brings together IYA topical threads, addressing sustainability and the needs of our audiences. 2) How do we know that the IYA programs we design actually work for our audiences? How do we assess and improve our work? This session will introduce participants to the "backwards design” process through which Adler educators create experiences that begin with focused goals. Facilitators will take participants through the Adler's evaluation planning method that uncovers what we want to know about our educational programs and experiences. Tools for program design and evaluation will be shared. 3) Facilitators will present for discussion three activities that have been designed and evaluated for one of our audiences, the museum-going family. Workshop participants are invited to critique and discuss these activities, their rationale, their fit with identified audience and institutional needs, and IYA thematic strands. Participants will share any ideas they have for adaptation of these activities for other audiences in their own settings. 4) Finally, all of the educational design and evaluation tools, program descriptions, and lesson plans will be compiled into an electronic document. Participants are encouraged to bring program description examples and/or activity lesson plans that can be incorporated into the document to provide an IYA "workbook". This workbook will be sent to all interested session participants by no later than July 31, 2008.

Fundamental Aeronautics Program: Overview of Project Work in Supersonic Cruise Efficiency

NASA Technical Reports Server (NTRS)

Castner, Raymond

2011-01-01

The Supersonics Project, part of NASA?s Fundamental Aeronautics Program, contains a number of technical challenge areas which include sonic boom community response, airport noise, high altitude emissions, cruise efficiency, light weight durable engines/airframes, and integrated multi-discipline system design. This presentation provides an overview of the current (2011) activities in the supersonic cruise efficiency technical challenge, and is focused specifically on propulsion technologies. The intent is to develop and validate high-performance supersonic inlet and nozzle technologies. Additional work is planned for design and analysis tools for highly-integrated low-noise, low-boom applications. If successful, the payoffs include improved technologies and tools for optimized propulsion systems, propulsion technologies for a minimized sonic boom signature, and a balanced approach to meeting efficiency and community noise goals. In this propulsion area, the work is divided into advanced supersonic inlet concepts, advanced supersonic nozzle concepts, low fidelity computational tool development, high fidelity computational tools, and improved sensors and measurement capability. The current work in each area is summarized.

Fundamental Aeronautics Program: Overview of Propulsion Work in the Supersonic Cruise Efficiency Technical Challenge

NASA Technical Reports Server (NTRS)

Castner, Ray

2012-01-01

The Supersonics Project, part of NASA's Fundamental Aeronautics Program, contains a number of technical challenge areas which include sonic boom community response, airport noise, high altitude emissions, cruise efficiency, light weight durable engines/airframes, and integrated multi-discipline system design. This presentation provides an overview of the current (2012) activities in the supersonic cruise efficiency technical challenge, and is focused specifically on propulsion technologies. The intent is to develop and validate high-performance supersonic inlet and nozzle technologies. Additional work is planned for design and analysis tools for highly-integrated low-noise, low-boom applications. If successful, the payoffs include improved technologies and tools for optimized propulsion systems, propulsion technologies for a minimized sonic boom signature, and a balanced approach to meeting efficiency and community noise goals. In this propulsion area, the work is divided into advanced supersonic inlet concepts, advanced supersonic nozzle concepts, low fidelity computational tool development, high fidelity computational tools, and improved sensors and measurement capability. The current work in each area is summarized.

Software verification plan for GCS. [guidance and control software

NASA Technical Reports Server (NTRS)

Dent, Leslie A.; Shagnea, Anita M.; Hayhurst, Kelly J.

1990-01-01

This verification plan is written as part of an experiment designed to study the fundamental characteristics of the software failure process. The experiment will be conducted using several implementations of software that were produced according to industry-standard guidelines, namely the Radio Technical Commission for Aeronautics RTCA/DO-178A guidelines, Software Consideration in Airborne Systems and Equipment Certification, for the development of flight software. This plan fulfills the DO-178A requirements for providing instructions on the testing of each implementation of software. The plan details the verification activities to be performed at each phase in the development process, contains a step by step description of the testing procedures, and discusses all of the tools used throughout the verification process.

Special population planner, version 4.0.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kuiper, J.; Tanzman, E.; Metz, W.

2007-03-26

Emergencies happen every day. Many are caused by storms or auto accidents and can be planned for, if not predicted. Emergencies resulting from natural hazards often affect a large number of people, and planning for them can be difficult, since knowledge of the needs of the people involved is generally unavailable. Emergencies resulting from accidents at industrial and military facilities can also be large scale in nature if people must be evacuated or sheltered in place. Federal planning for large scale emergencies is the responsibility of the Federal Emergency Management Agency (FEMA), which provides assistance to various emergency management agenciesmore » at the national, state and local level. More information about FEMA is available at http://www.fema.gov/. The purpose of the Special Population Planner (SPP) is to help emergency planners address the needs of persons with special needs. The exact definition of 'special population' is a policy decision. Policymakers have included a variety of groups in this term, such as persons with disabilities, those who do not have vehicles with which to evacuate, children who are unattended at times (latchkey children), and many others. The SPP was developed initially for the Alabama Emergency Management Agency as part of its Chemical Stockpile Emergency Preparedness Program (CSEPP), which aids emergency planning and preparedness in communities surrounding military installations across the United States where chemical weapons are stored pending their destruction under federal law. Like that specialized application, this open-source version contains a set of specialized Geographic Information System (GIS) tools to facilitate emergency planning on behalf of persons with special needs, regardless of how the term is defined. While the original SPP system was developed for emergency planning relating to chemical hazards, it can be applied to other threats as well. It is apparent from Hurricane Katrina and other natural and man-made disasters that many of the problems posed by emergency planning for a chemical weapons agent release are shared by other hazards as well. The notion that emergency planning shares common functions underlies the decision by FEMA to include the Chemical Stockpile Emergency Preparedness Program (CSEPP) in its 'all-hazards' planning approach. The CSEPP's official planning guidance operationalizes this approach by suggesting that state and local CSEPP emergency plans 'should be appended to the existing all-hazards emergency plan.' The SPP is programmed as a set of tools within an ESRI ArcMap 9.1 project. ArcMap is a component of both ESRI ArcGIS 9.1 and ESRI ArcView 9.1, and it provides a rich GIS user interface for viewing spatial and tabular data, analyzing it, and producing output reports and maps. This GIS interface has been augmented with the SPP tools for a user interface that provides custom functionality for emergency planning. The system as released also includes some hypothetical example records for special needs populations, facilities, resources, control points and sirens sufficient for showing how the system would work with real information. A GIS database is included with some publicly available example layers. The SPP is designed to support emergency planners as they address emergency management issues, and includes capabilities that support the collection and importing of data, the review of data in a spatial context, and GIS tools for emergency planning. The SPP system allows for the identification and categorization of response zones to allow for multiple levels of preparedness. An Immediate Response Zone (IRZ) might be designated as the area 0 to 10 miles from a facility where the response would be the most urgent. SPP can support more than one set of planning zones to accommodate different types of emergencies or the different jurisdictions of emergency response organizations. These areas can be delineated by any number of criteria that make sense for the area. An area like New Orleans might designate response zones based on the depth above/below sea level, or an urban area may categorize an IRZ as the 'central business district' with the PAZ encompassing the larger outlying area. Many of the sites involved in the CSEPP currently use an integrated emergency response information system to support their emergency management planning. The D2-Puff system (including or WebPuff 2.1) by Innovative Emergency Management, Inc. is the main software serving this purpose. More information on D2-Puff can be found at www.ieminc.com. SPP differs from D2-Puff in that it is designed for planning, not response to assist those with special needs, is programmed within a popular commercial GIS software system, and can be loaded with large amounts of data to support all hazards emergency planning.« less

Automated Kinematics Equations Generation and Constrained Motion Planning Resolution for Modular and Reconfigurable Robots

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pin, Francois G.; Love, Lonnie L.; Jung, David L.

2004-03-29

Contrary to the repetitive tasks performed by industrial robots, the tasks in most DOE missions such as environmental restoration or Decontamination and Decommissioning (D&D) can be characterized as ''batches-of-one'', in which robots must be capable of adapting to changes in constraints, tools, environment, criteria and configuration. No commercially available robot control code is suitable for use with such widely varying conditions. In this talk we present our development of a ''generic code'' to allow real time (at loop rate) robot behavior adaptation to changes in task objectives, tools, number and type of constraints, modes of controls or kinematics configuration. Wemore » present the analytical framework underlying our approach and detail the design of its two major modules for the automatic generation of the kinematics equations when the robot configuration or tools change and for the motion planning under time-varying constraints. Sample problems illustrating the capabilities of the developed system are presented.« less

Development of Waypoint Planning Tool in Response to NASA Field Campaign Challenges

NASA Technical Reports Server (NTRS)

He, Matt; Hardin, Danny; Mayer, Paul; Blakeslee, Richard; Goodman, Michael

2012-01-01

Airborne real time observations are a major component of NASA 's Earth Science research and satellite ground validation studies. Multiple aircraft are involved in most NASA field campaigns. The coordination of the aircraft with satellite overpasses, other airplanes and the constantly evolving, dynamic weather conditions often determines the success of the campaign. Planning a research aircraft mission within the context of meeting the science objectives is a complex task because it requires real time situational awareness of the weather conditions that affect the aircraft track. A flight planning tools is needed to provide situational awareness information to the mission scientists, and help them plan and modify the flight tracks. Scientists at the University of Alabama ]Huntsville and the NASA Marshall Space Flight Center developed the Waypoint Planning Tool, an interactive software tool that enables scientists to develop their own flight plans (also known as waypoints) with point -and-click mouse capabilities on a digital map filled with real time raster and vector data. The development of this Waypoint Planning Tool demonstrates the significance of mission support in responding to the challenges presented during NASA field campaigns. Analysis during and after each campaign helped identify both issues and new requirements, and initiated the next wave of development. Currently the Waypoint Planning Tool has gone through three rounds of development and analysis processes. The development of this waypoint tool is directly affected by the technology advances on GIS/Mapping technologies. From the standalone Google Earth application and simple KML functionalities, to Google Earth Plugin on web platform, and to the rising open source GIS tools with New Java Script frameworks, the Waypoint Planning Tool has entered its third phase of technology advancement. Adapting new technologies for the Waypoint Planning Tool ensures its success in helping scientist reach their mission objectives.

A qualitative appraisal of stakeholder reactions to a tool for burden of disease-based health system budgeting in Ghana.

PubMed

Awoonor-Williams, John Koku; Schmitt, Margaret L; Tiah, Janet; Ndago, Joyce; Asuru, Rofina; Bawah, Ayaga A; Phillips, James F

2016-01-01

In 2010, the Ghana Health Service launched a program of cooperation with the Tanzania Ministry of Health and Social Welfare that was designed to adapt Tanzania's PLANREP budgeting and reporting tool to Ghana's primary health care program. The product of this collaboration is a system of budgeting, data visualization, and reporting that is known as the District Health Planning and Reporting Tool (DiHPART). This study was conducted to evaluate the design and implementation processes (technical, procedures, feedback, maintenance, and monitoring) of the DiHPART tool in northern Ghana. This paper reports on a qualitative appraisal of user reactions to the DiHPART system and implications of pilot experience for national scale-up. A total of 20 health officials responsible for financial planning operations were drawn from the national, regional, and district levels of the health system and interviewed in open-ended discussions about their reactions to DiHPART and suggestions for systems development. The findings show that technical shortcomings merit correction before scale-up can proceed. The review makes note of features of the software system that could be developed, based on experience gained from the pilot. Changes in the national system of financial reporting and budgeting complicate DiHPART utilization. This attests to the importance of pursuing a software application framework that anticipates the need for automated software generation. Despite challenges encountered in the pilot, the results lend support to the notion that evidence-based budgeting merits development and implementation in Ghana.

Climate Action Planning Tool | NREL

Science.gov Websites

NREL's Climate Action Planning Tool provides a quick, basic estimate of how various technology options can contribute to an overall climate action plan for your research campus. Use the tool to

Software Design for Interactive Graphic Radiation Treatment Simulation Systems*

PubMed Central

Kalet, Ira J.; Sweeney, Christine; Jacky, Jonathan

1990-01-01

We examine issues in the design of interactive computer graphic simulation programs for radiation treatment planning (RTP), as well as expert system programs that automate parts of the RTP process, in light of ten years of experience at designing, building and using such programs. An experiment in object-oriented design using standard Pascal shows that while some advantage is gained from the design, it is still difficult to achieve modularity and to integrate expert system components. A new design based on the Common LISP Object System (CLOS) is described. This series of designs for RTP software shows that this application benefits in specific ways from object-oriented design methods and appropriate languages and tools.

The HDF Product Designer - Interoperability in the First Mile

NASA Astrophysics Data System (ADS)

Lee, H.; Jelenak, A.; Habermann, T.

2014-12-01

Interoperable data have been a long-time goal in many scientific communities. The recent growth in analysis, visualization and mash-up applications that expect data stored in a standardized manner has brought the interoperability issue to the fore. On the other hand, producing interoperable data is often regarded as a sideline task in a typical research team for which resources are not readily available. The HDF Group is developing a software tool aimed at lessening the burden of creating data in standards-compliant, interoperable HDF5 files. The tool, named HDF Product Designer, lowers the threshold needed to design such files by providing a user interface that combines the rich HDF5 feature set with applicable metadata conventions. Users can quickly devise new HDF5 files while at the same time seamlessly incorporating the latest best practices and conventions from their community. That is what the term interoperability in the first mile means: enabling generation of interoperable data in HDF5 files from the onset of their production. The tool also incorporates collaborative features, allowing team approach in the file design, as well as easy transfer of best practices as they are being developed. The current state of the tool and the plans for future development will be presented. Constructive input from interested parties is always welcome.

TH-C-12A-12: Veritas: An Open Source Tool to Facilitate User Interaction with TrueBeam Developer Mode

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mishra, P; Varian Medical Systems, Palo Alto, CA; Lewis, J

2014-06-15

Purpose: To address the challenges of creating delivery trajectories and imaging sequences with TrueBeam Developer Mode, a new open-source graphical XML builder, Veritas, has been developed, tested and made freely available. Veritas eliminates most of the need to understand the underlying schema and write XML scripts, by providing a graphical menu for each control point specifying the state of 30 mechanical/dose axes. All capabilities of Developer Mode are accessible in Veritas. Methods: Veritas was designed using QT Designer, a ‘what-you-is-what-you-get’ (WYSIWIG) tool for building graphical user interfaces (GUI). Different components of the GUI are integrated using QT's signals and slotsmore » mechanism. Functionalities are added using PySide, an open source, cross platform Python binding for the QT framework. The XML code generated is immediately visible, making it an interactive learning tool. A user starts from an anonymized DICOM file or XML example and introduces delivery modifications, or begins their experiment from scratch, then uses the GUI to modify control points as desired. The software automatically generates XML plans following the appropriate schema. Results: Veritas was tested by generating and delivering two XML plans at Brigham and Women's Hospital. The first example was created to irradiate the letter ‘B’ with a narrow MV beam using dynamic couch movements. The second was created to acquire 4D CBCT projections for four minutes. The delivery of the letter ‘B’ was observed using a 2D array of ionization chambers. Both deliveries were generated quickly in Veritas by non-expert Developer Mode users. Conclusion: We introduced a new open source tool Veritas for generating XML plans (delivery trajectories and imaging sequences). Veritas makes Developer Mode more accessible by reducing the learning curve for quick translation of research ideas into XML plans. Veritas is an open source initiative, creating the possibility for future developments and collaboration with other researchers. I am an employee of Varian Medical Systems.« less

Developing an Adaptive Tool to Select, Plan, and Scaffold Oral Assessment Tasks for Undergraduate Courses

ERIC Educational Resources Information Center

Demmans Epp, Carrie; Park, Gina; Plumb, Christopher

2015-01-01

The increased linguistic and cultural diversity of undergraduate classrooms at English language institutions has imposed additional pedagogical and assessment challenges on instructors, many of whom lack the knowledge necessary to design classroom activities and assessments that are fair to all students regardless of students' background and…

Developmental Plan Handbook for Community Skills Training (TACL, Training Adults for Community Living).

ERIC Educational Resources Information Center

Roth, Martin R.; Hermus, Gary P.

Based on behavioral principles, the handbook is designed as both an assessment tool and curriculum guide for training community living skills to mentally retarded and developmentally disabled individuals. Behavioral Programing Scales are provided to record baseline data, where the client receives no assistance. These scales cover all program…

Small Scale Beekeeping. Appropriate Technologies for Development. Manual M-17.

ERIC Educational Resources Information Center

Gentry, Curtis

This manual is designed to assist Peace Corps volunteers in the development and implementation of small-scale beekeeping programs as a tool for development. Addressed in the individual chapters are bees and humans; project planning; the types and habits of bees; the essence of beekeeping; bee space and beehives; intermediate technology beekeeping;…

Rubric for Linked Learning Pathway Certification

ERIC Educational Resources Information Center

LaPlante, Arlene; Stearns, Roman

2010-01-01

This rubric was created to help pathway teams as they work together to develop and improve a comprehensive program of study. Specifically, the rubric can serve as a tool for: (1) Visioning; (2) Self-assessment; (3) Planning; and (4) Quality review. ConnectEd designed this rubric to be used in coordination with the Certification Criteria for Linked…

Habitat classification modelling with incomplete data: Pushing the habitat envelope

Treesearch

Phoebe L. Zarnetske; Thomas C. Edwards; Gretchen G. Moisen

2007-01-01

Habitat classification models (HCMs) are invaluable tools for species conservation, land-use planning, reserve design, and metapopulation assessments, particularly at broad spatial scales. However, species occurrence data are often lacking and typically limited to presence points at broad scales. This lack of absence data precludes the use of many statistical...

Planning the Next Generation of Regional Atlases: Input from Educators.

ERIC Educational Resources Information Center

Keller, C. Peter; And Others

1995-01-01

Maintains that regional atlases are an important educational tool that must be updated to remain current and valuable. Reports on a user survey among 123 Canadian geography teachers about content and design of atlases. Finds that teachers value simplicity and up-to-date information and not CD-ROM atlases. (CFR)

Mathematics-Literacy Checklists: A Pedagogical Innovation to Support Teachers as They Implement the Common Core

ERIC Educational Resources Information Center

del Prado Hill, Pixita; Friedland, Ellen S.; McMillen, Susan

2016-01-01

This article presents two innovative tools--the Mathematics-Literacy Planning Framework and Mathematics-Literacy Implementation Checklist--which are designed to help instructional coaches and specialists support teachers to meet the challenges of the mathematics-literacy integration goals of the Common Core. Developed with teacher input, these…

Implementing Strategic Change: A Practical Guide for Business.

ERIC Educational Resources Information Center

Grundy, Tony

This book is designed to serve as a practical guide to planning and managing change within a business, and as a text for graduate business students studying change strategies. It focuses on the rationale for change, managing the change process, tools for change, creating a strategic vision for change, and checklists for implementing strategic…

Diversity of floral and extrafloral nutritional resources on the fitness of an omnivorous bug, Orius insidiosus (Hemiptera: Anthocoridae)

USDA-ARS?s Scientific Manuscript database

Habitat manipulation and increasing biodiversity are important tools for enhancing biological control of pests but it is important to evaluate the relative benefits of specific plant species when designing conservation plans. Orius insidiosus is an important predator of thrips and aphids that also f...

Construction Systems. Curriculum Guide for Technology Education.

ERIC Educational Resources Information Center

Spencer, Albert G.

This curriculum guide for a 1-semester or 1-year course on construction systems is designed to acquaint students with the nature of the construction industry and its technology--tools, materials, and methods of construction--as well as the systems for planning and managing construction projects. The guide contains a course outline, competencies…

Hunting and Wildlife Management. Issue Pac.

ERIC Educational Resources Information Center

Fish and Wildlife Service (Dept. of Interior), Washington, DC.

The materials in this educational packet are designed for use with students in grades 4 through 7. They consist of an overview, three lesson plans, student data sheets, and a poster. The overview discusses hunting as a tool for wildlife management, the management of wildlife populations and hunter participation in providing research data, and the…

Integrated management of timber and deer: coastal forests of British Columbia and Alaska.

Treesearch

J.B. Nyberg; R.S. McNay; M.D. [and others] Kirchhoff

1989-01-01

Current techniques for integrating timber and deer management in coastal British Columbia and Alaska are reviewed and evaluated. Integration can be improved by setting objectives for deer habitat and timber, improving managers' knowledge of interactions, and providing planning tools to analyze alternative programs of forest management. A handbook designed to...

The Integrative Role of the Campus Environmental Audit: Experiences at Bishop's University, Canada

ERIC Educational Resources Information Center

Bardati, Darren R.

2006-01-01

Purpose: This paper seeks to suggest that the campus environmental audit can become an important tool that synergizes active learning and operations planning and management approaches to promote sustainability on university campuses. Design/methodology/approach: The paper presents the author's experiences at Bishop's University with the evolution…

Maximizing Access Technology Tools for the Library of the Future

ERIC Educational Resources Information Center

Pearson, Waynn

2003-01-01

The renovated Cerritos Public Library is a unique blending of traditional and hightech features. One of the key principles in its planning and design was to enable a range of convenient access services. This article summarizes the process of building this library and how it has been received by users. (Contains 5 figures.)

SCHOOL SAFETY EDUCATION CHECKLIST--ADMINISTRATION, INSTRUCTION, PROTECTION.

ERIC Educational Resources Information Center

National Education Association, Washington, DC.

THIS CHECKLIST IS AN EVALUATIVE TOOL FOR PLANNING PROGRAM IMPROVEMENT. PURPOSING TO STIMULATE THOUGHT AND ACTION ON PROBLEMS OF SAFETY EDUCATION IN SCHOOLS, IT IS DESIGNED TO ENCOURAGE INSPECTIONS OF SCHOOL BUILDINGS FOR (1) SAFE CONDITIONS OF STRUCTURES, GROUNDS, AND EQUIPMENT, (2) SAFE PRACTICES, AND (3) OPTIMUM USE OF THESE SAFE PRACTICES IN…

Leveraging Digital Tools to Build Educative Curricula for Teachers: Two Promising Approaches

ERIC Educational Resources Information Center

Bates, Meg S.

2017-01-01

Well-designed curriculum materials include educative components that help teachers effectively plan, implement, and adapt activities for diverse learners. Digital materials offer several affordances over print materials in the format, fit, and flexibility of the educative information provided to teachers, as well as the ability of the materials to…

Integrating Career Development into the Accounting Curriculum

ERIC Educational Resources Information Center

Wessels, Susan B.; Sumner, Dana F.

2014-01-01

This paper describes a series of integrated career development activities offered in several required courses which are designed to help accounting majors gain a competitive edge in the job market. Supported by a partnership between the School of Business and the Academic and Career Planning Office, the Career Tool Kit program consists of…

Landscape analysis software tools

Treesearch

Don Vandendriesche

2008-01-01

Recently, several new computer programs have been developed to assist in landscape analysis. The “Sequential Processing Routine for Arraying Yields” (SPRAY) program was designed to run a group of stands with particular treatment activities to produce vegetation yield profiles for forest planning. SPRAY uses existing Forest Vegetation Simulator (FVS) software coupled...

Big A Systems Architecture - From Strategy to Design: Systems Architecting in DoD

DTIC Science & Technology

2013-04-01

and modeling standards such as Systems Modeling Language ( SysML ). These tools have great potential to facilitate col- laboration and improve the...MBSE and SysML to Big “A” systems architecting and the potential ben- efits to acquisition outcomes are planned to be the subject of a future article

Virtual Surgical Planning: The Pearls and Pitfalls

PubMed Central

Efanov, Johnny I.; Roy, Andrée-Anne; Huang, Ke N.

2018-01-01

Objective: Over the past few years, virtual surgical planning (VSP) has evolved into a useful tool for the craniofacial surgeon. Virtual planning and computer-aided design and manufacturing (CAD/CAM) may assist in orthognathic, cranio-orbital, traumatic, and microsurgery of the craniofacial skeleton. Despite its increasing popularity, little emphasis has been placed on the learning curve. Methods: A retrospective analysis of consecutive virtual surgeries was done from July 2012 to October 2016 at the University of Montreal Teaching Hospitals. Orthognathic surgeries and free vascularized bone flap surgeries were included in the analysis. Results: Fifty-four virtual surgeries were done in the time period analyzed. Forty-six orthognathic surgeries and 8 free bone transfers were done. An analysis of errors was done. Eighty-five percentage of the orthognathic virtual plans were adhered to completely, 4% of the plans were abandoned, and 11% were partially adhered to. Seventy-five percentage of the virtual surgeries for free tissue transfers were adhered to, whereas 25% were partially adhered to. The reasons for abandoning the plans were (1) poor communication between surgeon and engineer, (2) poor appreciation for condyle placement on preoperative scans, (3) soft-tissue impedance to bony movement, (4) rapid tumor progression, (5) poor preoperative assessment of anatomy. Conclusion: Virtual surgical planning is a useful tool for craniofacial surgery but has inherent issues that the surgeon must be aware of. With time and experience, these surgical plans can be used as powerful adjuvants to good clinical judgement. PMID:29464146

Optimization of turning process through the analytic flank wear modelling

NASA Astrophysics Data System (ADS)

Del Prete, A.; Franchi, R.; De Lorenzis, D.

2018-05-01

In the present work, the approach used for the optimization of the process capabilities for Oil&Gas components machining will be described. These components are machined by turning of stainless steel castings workpieces. For this purpose, a proper Design Of Experiments (DOE) plan has been designed and executed: as output of the experimentation, data about tool wear have been collected. The DOE has been designed starting from the cutting speed and feed values recommended by the tools manufacturer; the depth of cut parameter has been maintained as a constant. Wear data has been obtained by means the observation of the tool flank wear under an optical microscope: the data acquisition has been carried out at regular intervals of working times. Through a statistical data and regression analysis, analytical models of the flank wear and the tool life have been obtained. The optimization approach used is a multi-objective optimization, which minimizes the production time and the number of cutting tools used, under the constraint on a defined flank wear level. The technique used to solve the optimization problem is a Multi Objective Particle Swarm Optimization (MOPS). The optimization results, validated by the execution of a further experimental campaign, highlighted the reliability of the work and confirmed the usability of the optimized process parameters and the potential benefit for the company.

An Intelligent Crop Planning Tool for Controlled Ecological Life Support Systems

NASA Technical Reports Server (NTRS)

Whitaker, Laura O.; Leon, Jorge

1996-01-01

This paper describes a crop planning tool developed for the Controlled Ecological Life Support Systems (CELSS) project which is in the research phases at various NASA facilities. The Crop Planning Tool was developed to assist in the understanding of the long term applications of a CELSS environment. The tool consists of a crop schedule generator as well as a crop schedule simulator. The importance of crop planning tools such as the one developed is discussed. The simulator is outlined in detail while the schedule generator is touched upon briefly. The simulator consists of data inputs, plant and human models, and various other CELSS activity models such as food consumption and waste regeneration. The program inputs such as crew data and crop states are discussed. References are included for all nominal parameters used. Activities including harvesting, planting, plant respiration, and human respiration are discussed using mathematical models. Plans provided to the simulator by the plan generator are evaluated for their 'fitness' to the CELSS environment with an objective function based upon daily reservoir levels. Sample runs of the Crop Planning Tool and future needs for the tool are detailed.

Plan selection in Medicare Part D: Evidence from administrative data

PubMed Central

Heiss, Florian; Leive, Adam; McFadden, Daniel; Winter, Joachim

2014-01-01

We study the Medicare Part D prescription drug insurance program as a bellwether for designs of private, non-mandatory health insurance markets, focusing on the ability of consumers to evaluate and optimize their choices of plans. Our analysis of administrative data on medical claims in Medicare Part D suggests that fewer than 25 percent of individuals enroll in plans that are ex ante as good as the least cost plan specified by the Plan Finder tool made available to seniors by the Medicare administration, and that consumers on average have expected excess spending of about $300 per year, or about 15 percent of expected total out-of-pocket cost for drugs and Part D insurance. These numbers are hard to reconcile with decision costs alone; it appears that unless a sizeable fraction of consumers place large values on plan features other than cost, they are not optimizing effectively. PMID:24308882

EMI datalib - joining the best of ARC and gLite data libraries

NASA Astrophysics Data System (ADS)

Nilsen, J. K.; Cameron, D.; Devresse, A.; Molnar, Zs; Nagy, Zs; Salichos, M.

2012-12-01

To manage data in the grid, with its jungle of protocols and enormous amount of data in different storage solutions, it is important to have a strong, versatile and reliable data management library. While there are several data management tools and libraries available, they all have different strengths and weaknesses, and it can be hard to decide which tool to use for which purpose. EMI is a collaboration between the European middleware providers aiming to take the best out of each middleware to create one consolidated, all-purpose grid middleware. When EMI started there were two main tools for managing data - gLite had lcg util and the GFAL library, ARC had the ARC data tools and libarcdata2. While different in design and purpose, they both have the same goal; to manage data in the grid. The design of the new EMI datalib was ready by the end of 2011, and a first prototype is now implemented and going through a thorough testing phase. This presentation will give the latest results of the consolidated library together with an overview of the design, test plan and roadmap of EMI datalib.

Knowledge-based computer systems for radiotherapy planning.

PubMed

Kalet, I J; Paluszynski, W

1990-08-01

Radiation therapy is one of the first areas of clinical medicine to utilize computers in support of routine clinical decision making. The role of the computer has evolved from simple dose calculations to elaborate interactive graphic three-dimensional simulations. These simulations can combine external irradiation from megavoltage photons, electrons, and particle beams with interstitial and intracavitary sources. With the flexibility and power of modern radiotherapy equipment and the ability of computer programs that simulate anything the machinery can do, we now face a challenge to utilize this capability to design more effective radiation treatments. How can we manage the increased complexity of sophisticated treatment planning? A promising approach will be to use artificial intelligence techniques to systematize our present knowledge about design of treatment plans, and to provide a framework for developing new treatment strategies. Far from replacing the physician, physicist, or dosimetrist, artificial intelligence-based software tools can assist the treatment planning team in producing more powerful and effective treatment plans. Research in progress using knowledge-based (AI) programming in treatment planning already has indicated the usefulness of such concepts as rule-based reasoning, hierarchical organization of knowledge, and reasoning from prototypes. Problems to be solved include how to handle continuously varying parameters and how to evaluate plans in order to direct improvements.

Planning and executing complex large-scale exercises.

PubMed

McCormick, Lisa C; Hites, Lisle; Wakelee, Jessica F; Rucks, Andrew C; Ginter, Peter M

2014-01-01

Increasingly, public health departments are designing and engaging in complex operations-based full-scale exercises to test multiple public health preparedness response functions. The Department of Homeland Security's Homeland Security Exercise and Evaluation Program (HSEEP) supplies benchmark guidelines that provide a framework for both the design and the evaluation of drills and exercises; however, the HSEEP framework does not seem to have been designed to manage the development and evaluation of multiple, operations-based, parallel exercises combined into 1 complex large-scale event. Lessons learned from the planning of the Mississippi State Department of Health Emergency Support Function--8 involvement in National Level Exercise 2011 were used to develop an expanded exercise planning model that is HSEEP compliant but accounts for increased exercise complexity and is more functional for public health. The Expanded HSEEP (E-HSEEP) model was developed through changes in the HSEEP exercise planning process in areas of Exercise Plan, Controller/Evaluator Handbook, Evaluation Plan, and After Action Report and Improvement Plan development. The E-HSEEP model was tested and refined during the planning and evaluation of Mississippi's State-level Emergency Support Function-8 exercises in 2012 and 2013. As a result of using the E-HSEEP model, Mississippi State Department of Health was able to capture strengths, lessons learned, and areas for improvement, and identify microlevel issues that may have been missed using the traditional HSEEP framework. The South Central Preparedness and Emergency Response Learning Center is working to create an Excel-based E-HSEEP tool that will allow practice partners to build a database to track corrective actions and conduct many different types of analyses and comparisons.

A Flexible framework for forward and inverse modeling of stormwater control measures

NASA Astrophysics Data System (ADS)

Aflaki, S.; Massoudieh, A.

2016-12-01

Models that allow for design considerations of green infrastructure (GI) practices to control stormwater runoff and associated contaminants have received considerable attention in recent years. While popular, generally, the GI models are relatively simplistic. However, GI model predictions are being relied upon by many municipalities and State/Local agencies to make decisions about grey vs. green infrastructure improvement planning. Adding complexity to GI modeling frameworks may preclude their use in simpler urban planning situations. Therefore, the goal here was to develop a sophisticated, yet flexible tool that could be used by design engineers and researchers to capture and explore the effect of design factors and properties of the media used in the performance of GI systems at a relatively small scale. We deemed it essential to have a flexible GI modeling tool that is capable of simulating GI system components and specific biophysical processes affecting contaminants such as reactions, and particle-associated transport accurately while maintaining a high degree of flexibly to account for the myriad of GI alternatives. The mathematical framework for a stand-alone GI performance assessment tool has been developed and will be demonstrated. The process-based model framework developed here can be used to model a diverse range of GI practices such as green roof, retention pond, bioretention, infiltration trench, permeable pavement and other custom-designed combinatory systems. Four demonstration applications covering a diverse range of systems will be presented. The example applications include a evaluating hydraulic performance of a complex bioretention system, hydraulic analysis of porous pavement system, flow colloid-facilitated transport, reactive transport and groundwater recharge underneath an infiltration pond and finally reactive transport and bed-sediment interactions in a wetland system will be presented.

Failure mode analysis to predict product reliability.

NASA Technical Reports Server (NTRS)

Zemanick, P. P.

1972-01-01

The failure mode analysis (FMA) is described as a design tool to predict and improve product reliability. The objectives of the failure mode analysis are presented as they influence component design, configuration selection, the product test program, the quality assurance plan, and engineering analysis priorities. The detailed mechanics of performing a failure mode analysis are discussed, including one suggested format. Some practical difficulties of implementation are indicated, drawn from experience with preparing FMAs on the nuclear rocket engine program.

Design and fabrication of composite blades for the Mod-1 wind turbine generator

NASA Technical Reports Server (NTRS)

Batesole, W. R.; Gunsallus, C. T.

1981-01-01

The design, tooling, fabrication, quality control, and testing phases carried out to date, as well as testing still planned are described. Differences from the 150 foot blade which were introduced for cost and manufacturing improvement purposes are discussed as well as the lightning protection system installed in the blades. Actual costs and manhours expended for Blade No. 2 are provided as a base, along with a projection of costs for the blade in production.

Skylab

NASA Image and Video Library

1967-09-01

This September 1967 photograph shows workmen removing a mockup of the Saturn V S-IVB stage that housed the Skylab Orbital Workshop (OWS) from the Marshall Space Flight Center (MSFC), building 4755. The mockup was shipped to McDornell Douglas in Huntington, California for design modifications. NASA used the mockup as an engineering design tool to plan structures, equipment, and experiments for Skylab, an orbiting space laboratory. The MSFC had program management responsibility for the development of Skylab hardware and experiments, including the OWS.

Greased Lightning (GL-10) Performance Flight Research: Flight Data Report

NASA Technical Reports Server (NTRS)

McSwain, Robert G.; Glaab, Louis J.; Theodore, Colin R.; Rhew, Ray D. (Editor); North, David D. (Editor)

2017-01-01

Modern aircraft design methods have produced acceptable designs for large conventional aircraft performance. With revolutionary electronic propulsion technologies fueled by the growth in the small UAS (Unmanned Aerial Systems) industry, these same prediction models are being applied to new smaller, and experimental design concepts requiring a VTOL (Vertical Take Off and Landing) capability for ODM (On Demand Mobility). A 50% sub-scale GL-10 flight model was built and tested to demonstrate the transition from hover to forward flight utilizing DEP (Distributed Electric Propulsion)[1][2]. In 2016 plans were put in place to conduct performance flight testing on the 50% sub-scale GL-10 flight model to support a NASA project called DELIVER (Design Environment for Novel Vertical Lift Vehicles). DELIVER was investigating the feasibility of including smaller and more experimental aircraft configurations into a NASA design tool called NDARC (NASA Design and Analysis of Rotorcraft)[3]. This report covers the performance flight data collected during flight testing of the GL-10 50% sub-scale flight model conducted at Beaver Dam Airpark, VA. Overall the flight test data provides great insight into how well our existing conceptual design tools predict the performance of small scale experimental DEP concepts. Low fidelity conceptual design tools estimated the (L/D)( sub max)of the GL-10 50% sub-scale flight model to be 16. Experimentally measured (L/D)( sub max) for the GL-10 50% scale flight model was 7.2. The aerodynamic performance predicted versus measured highlights the complexity of wing and nacelle interactions which is not currently accounted for in existing low fidelity tools.

Treatment planning and smile design using composite resin.

PubMed

Marus, Robert

2006-05-01

Recent advances in dental materials and adhesive protocols have expanded the restorative procedures available to today's clinicians. Used in combination with proper treatment planning, these innovations enable dental professionals to provide enhanced aesthetic care that achieves the increasing expectations of their patients. Using a case presentation, this article will document the steps required to harmoniously integrate smile design, material selection, and patient communication that are involved in the provisional of aesthetic dental care. This article discusses the utilization of composite resin as a tool to enhance the patient's smile. Upon reading this article, the reader should: Become familiar with a smile-enhancing technique which can be completed in one office visit. Realize the benefits that intraoral composite mockups offer in terms of prototyping and confirming patient satisfaction.

Low-Power Differential SRAM design for SOC Based on the 25-um Technology

NASA Astrophysics Data System (ADS)

Godugunuri, Sivaprasad; Dara, Naveen; Sambasiva Nayak, R.; Nayeemuddin, Md; Singh, Yadu, Dr.; Veda, R. N. S. Sunil

2017-08-01

In recent, the SOC styles area unit the vast complicated styles in VLSI these SOC styles having important low-power operations problems, to comprehend this we tend to enforced low-power SRAM. However these SRAM Architectures critically affects the entire power of SOC and competitive space. To beat the higher than disadvantages, during this paper, a low-power differential SRAM design is planned. The differential SRAM design stores multiple bits within the same cell, operates at minimum in operation low-tension and space per bit. The differential SRAM design designed supported the 25-um technology using Tanner-EDA Tool.

Design concepts for the development of cooperative problem-solving systems

NASA Technical Reports Server (NTRS)

Smith, Philip J.; Mccoy, Elaine; Layton, Chuck; Bihari, Tom

1992-01-01

There are many problem-solving tasks that are too complex to fully automate given the current state of technology. Nevertheless, significant improvements in overall system performance could result from the introduction of well-designed computer aids. We have been studying the development of cognitive tools for one such problem-solving task, enroute flight path planning for commercial airlines. Our goal was two-fold. First, we were developing specific systems designs to help with this important practical problem. Second, we are using this context to explore general design concepts to guide in the development of cooperative problem-solving systems. These designs concepts are described.

Moving toward integrated value-based planning: The issues

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chamberlin, J.H.; Braithwait, C.L.

1988-07-01

Integrated Value-Based Planning (IVP) is a promising new planning approach that uses value, as well as cost, as the common denominator for evaluating supply and demand resource options. Planning based on value yields an ''apples to apples'' comparison of utility and customer options. The IVP approach can form the cornerstone of a successful market-driven utility planning strategy. This conference will raise questions, discuss issues, and further the exchange of information regarding the tools, concepts, and techniques needed to put IVP into the utility planner's toolbox. This proceedings is more than a compendium of papers. It is designed to let bothmore » participants and non-participants exchange information. To this end, listings and cross-listings of papers, speakers and participant interest areas, along with the ever-invaluable phone number have been included.« less

A software tool for advanced MRgFUS prostate therapy planning and follow up

NASA Astrophysics Data System (ADS)

van Straaten, Dörte; Hoogenboom, Martijn; van Amerongen, Martinus J.; Weiler, Florian; Issawi, Jumana Al; Günther, Matthias; Fütterer, Jurgen; Jenne, Jürgen W.

2017-03-01

US guided HIFU/FUS ablation for the therapy of prostate cancer is a clinical established method, while MR guided HIFU/FUS applications for prostate recently started clinical evaluation. Even if MRI examination is an excellent diagnostic tool for prostate cancer, it is a time consuming procedure and not practicable within an MRgFUS therapy session. The aim of our ongoing work is to develop software to support therapy planning and post-therapy follow-up for MRgFUS on localized prostate cancer, based on multi-parametric MR protocols. The clinical workflow of diagnosis, therapy and follow-up of MR guided FUS on prostate cancer was deeply analyzed. Based on this, the image processing workflow was designed and all necessary components, e.g. GUI, viewer, registration tools etc. were defined and implemented. The software bases on MeVisLab with several implemented C++ modules for the image processing tasks. The developed software, called LTC (Local Therapy Control) will register and visualize automatically all images (T1w, T2w, DWI etc.) and ADC or perfusion maps gained from the diagnostic MRI session. This maximum of diagnostic information helps to segment all necessary ROIs, e.g. the tumor, for therapy planning. Final therapy planning will be performed based on these segmentation data in the following MRgFUS therapy session. In addition, the developed software should help to evaluate the therapy success, by synchronization and display of pre-therapeutic, therapy and follow-up image data including the therapy plan and thermal dose information. In this ongoing project, the first stand-alone prototype was completed and will be clinically evaluated.

Design/Analysis of the JWST ISIM Bonded Joints for Survivability at Cryogenic Temperatures

NASA Technical Reports Server (NTRS)

Bartoszyk, Andrew; Johnston, John; Kaprielian, Charles; Kuhn, Jonathan; Kunt, Cengiz; Rodini,Benjamin; Young, Daniel

1990-01-01

A major design and analysis challenge for the JWST ISIM structure is thermal survivability of metal/composite bonded joints below the cryogenic temperature of 30K (-405 F). Current bonded joint concepts include internal invar plug fittings, external saddle titanium/invar fittings and composite gusset/clip joints all bonded to M55J/954-6 and T300/954-6 hybrid composite tubes (75mm square). Analytical experience and design work done on metal/composite bonded joints at temperatures below that of liquid nitrogen are limited and important analysis tools, material properties, and failure criteria for composites at cryogenic temperatures are sparse in the literature. Increasing this challenge is the difficulty in testing for these required tools and properties at cryogenic temperatures. To gain confidence in analyzing and designing the ISIM joints, a comprehensive joint development test program has been planned and is currently running. The test program is designed to produce required analytical tools and develop a composite failure criterion for bonded joint strengths at cryogenic temperatures. Finite element analysis is used to design simple test coupons that simulate anticipated stress states in the flight joints; subsequently the test results are used to correlate the analysis technique for the final design of the bonded joints. In this work, we present an overview of the analysis and test methodology, current results, and working joint designs based on developed techniques and properties.

Using Behavioral Science to Design a Peer Comparison Intervention for Postabortion Family Planning in Nepal

PubMed Central

Spring, Hannah; Datta, Saugato; Sapkota, Sabitri

2016-01-01

Despite the provision of free and subsidized family planning services and clients’ demonstrated intentions to delay pregnancies, family planning uptake among women who receive abortion and postabortion services at Sunaulo Parivar Nepal (SPN), one of Nepal’s largest non-governmental sexual and reproductive health (SRH) providers, remains low. Through meetings, interviews, and observations with SPN’s stakeholders, service providers, and clients at its 36 SRH centers, we developed hypotheses about client- and provider-side barriers that may inhibit postabortion family planning (PAFP) uptake. On the provider side, we found that the lack of benchmarks (such as the performance of other facilities) against which providers could compare their own performance and the lack of feedback on the performance were important barriers to PAFP uptake. We designed several variants of three interventions to address these barriers. Through conversations with team members at SPN’s centralized support office and service providers at SPN centers, we prioritized a peer-comparison tool that allows providers at one center to compare their performance with that of other similar centers. We used feedback from the community of providers on the tools’ usability and features to select a variant of the tool that also leverages and reinforces providers’ strong intrinsic motivation to provide quality PAFP services. In this paper, we detail the process of identifying barriers and creating an intervention to overcome those barriers. The intervention’s effectiveness will be tested with a center-level, stepped-wedge randomized control trial in which SPN’s 36 centers will be randomly assigned to receive the intervention at 1-month intervals over a 6-month period. Existing medical record data will be used to monitor family planning uptake. PMID:27446891

EUROPA2: Plan Database Services for Planning and Scheduling Applications

NASA Technical Reports Server (NTRS)

Bedrax-Weiss, Tania; Frank, Jeremy; Jonsson, Ari; McGann, Conor

2004-01-01

NASA missions require solving a wide variety of planning and scheduling problems with temporal constraints; simple resources such as robotic arms, communications antennae and cameras; complex replenishable resources such as memory, power and fuel; and complex constraints on geometry, heat and lighting angles. Planners and schedulers that solve these problems are used in ground tools as well as onboard systems. The diversity of planning problems and applications of planners and schedulers precludes a one-size fits all solution. However, many of the underlying technologies are common across planning domains and applications. We describe CAPR, a formalism for planning that is general enough to cover a wide variety of planning and scheduling domains of interest to NASA. We then describe EUROPA(sub 2), a software framework implementing CAPR. EUROPA(sub 2) provides efficient, customizable Plan Database Services that enable the integration of CAPR into a wide variety of applications. We describe the design of EUROPA(sub 2) from the perspective of both modeling, customization and application integration to different classes of NASA missions.

Jupiter Europa Orbiter Architecture Definition Process

NASA Technical Reports Server (NTRS)

Rasmussen, Robert; Shishko, Robert

2011-01-01

The proposed Jupiter Europa Orbiter mission, planned for launch in 2020, is using a new architectural process and framework tool to drive its model-based systems engineering effort. The process focuses on getting the architecture right before writing requirements and developing a point design. A new architecture framework tool provides for the structured entry and retrieval of architecture artifacts based on an emerging architecture meta-model. This paper describes the relationships among these artifacts and how they are used in the systems engineering effort. Some early lessons learned are discussed.

Tailored prevention of inpatient falls: development and usability testing of the fall TIPS toolkit.

PubMed

Zuyev, Lyubov; Benoit, Angela N; Chang, Frank Y; Dykes, Patricia C

2011-02-01

Patient falls and fall-related injuries are serious problems in hospitals. The Fall TIPS application aims to prevent patient falls by translating routine nursing fall risk assessment into a decision support intervention that communicates fall risk status and creates a tailored evidence-based plan of care that is accessible to the care team, patients, and family members. In our design and implementation of the Fall TIPS toolkit, we used the Spiral Software Development Life Cycle model. Three output tools available to be generated from the toolkit are bed poster, plan of care, and patient education handout. A preliminary design of the application was based on initial requirements defined by project leaders and informed by focus groups with end users. Preliminary design partially simulated the paper version of the Morse Fall Scale currently used in hospitals involved in the research study. Strengths and weaknesses of the first prototype were identified by heuristic evaluation. Usability testing was performed at sites where research study is implemented. Suggestions mentioned by end users participating in usability studies were either directly incorporated into the toolkit and output tools, were slightly modified, or will be addressed during training. The next step is implementation of the fall prevention toolkit on the pilot testing units.

Visual Decision Support Tool for Supporting Asset ...

EPA Pesticide Factsheets

Abstract:Managing urban water infrastructures faces the challenge of jointly dealing with assets of diverse types, useful life, cost, ages and condition. Service quality and sustainability require sound long-term planning, well aligned with tactical and operational planning and management. In summary, the objective of an integrated approach to infrastructure asset management is to assist utilities answer the following questions:•Who are we at present?•What service do we deliver?•What do we own?•Where do we want to be in the long-term?•How do we get there?The AWARE-P approach (www.aware-p.org) offers a coherent methodological framework and a valuable portfolio of software tools. It is designed to assist water supply and wastewater utility decision-makers in their analyses and planning processes. It is based on a Plan-Do-Check-Act process and is in accordance with the key principles of the International Standards Organization (ISO) 55000 standards on asset management. It is compatible with, and complementary to WERF’s SIMPLE framework. The software assists in strategic, tactical, and operational planning, through a non-intrusive, web-based, collaborative environment where objectives and metrics drive IAM planning. It is aimed at industry professionals and managers, as well as at the consultants and technical experts that support them. It is easy to use and maximizes the value of information from multiple existing data sources, both in da

Low-Cost SIRTF Flight Operations

NASA Astrophysics Data System (ADS)

Deutsch, M.-J.; Ebersole, M.; Nichols, J.

1997-12-01

The Space Infrared Telescope Facility (SIRTF) , the fourth of the Great Observatories, will be placed in a unique solar orbit trailing the Earth, in 2001. SIRTF will acquire both imaging and spectral data using large infrared detector arrays from 3.5mm to 160mm. The primary science objectives are (1) search for and study of brown dwarfs and super planets, (2) discovery and study of protoplanetary debris disks, (3) study of ultraluminous galaxies and active galactic nuclei, and (4) study of the early Universe. Driven by the limited cryogenic lifetime of 2.5 years, with a goal of 5 years, and the severely cost-capped development, a Mission Planning and Operations system is being designed that will result in high on-board efficiency (>90%) and low-cost operation, yet will accommodate rapid response science requirements . SIRTF is designing an architecture for an operations system that will be shared between science and flight operations. Crucial to this effort is the philosophy of an integrated science and engineering plan, co-location, cross-training of teams and common planning tools. The common tool set will enable the automatic generation of an integrated and conflict free planned schedule accommodating 20 000 observations and engineering activities a year. The shared tool set will help generate standard observations , (sometimes non-standard) engineering activities and manage the ground and flight resources and constraints appropriately. The ground software will allow the development from the ground of robust event driven sequences. Flexibility will be provided to incorporate newly discovered science opportunities or health issues late in the process and via quick links. This shared science and flight operations process if used from observation selection through sequence and command generation, will provide a low-cost operations system. Though SIRTF is a 'Great Observatory', its annual mission operations costs will more closely resemble those of an Explorer class mission.

Interactive Planning under Uncertainty with Casual Modeling and Analysis

DTIC Science & Technology

2006-01-01

Tool ( CAT ), a system for creating and analyzing causal models similar to Bayes networks. In order to use CAT as a tool for planning, users go through...an iterative process in which they use CAT to create and an- alyze alternative plans. One of the biggest difficulties is that the number of possible...Causal Analysis Tool ( CAT ), which is a tool for representing and analyzing causal networks sim- ilar to Bayesian networks. In order to represent plans

Collaboratively Conceived, Designed and Implemented: Matching Visualization Tools with Geoscience Data Collections and Geoscience Data Collections with Visualization Tools via the ToolMatch Service.

NASA Astrophysics Data System (ADS)

Hoebelheinrich, N. J.; Lynnes, C.; West, P.; Ferritto, M.

2014-12-01

Two problems common to many geoscience domains are the difficulties in finding tools to work with a given dataset collection, and conversely, the difficulties in finding data for a known tool. A collaborative team from the Earth Science Information Partnership (ESIP) has gotten together to design and create a web service, called ToolMatch, to address these problems. The team began their efforts by defining an initial, relatively simple conceptual model that addressed the two uses cases briefly described above. The conceptual model is expressed as an ontology using OWL (Web Ontology Language) and DCterms (Dublin Core Terms), and utilizing standard ontologies such as DOAP (Description of a Project), FOAF (Friend of a Friend), SKOS (Simple Knowledge Organization System) and DCAT (Data Catalog Vocabulary). The ToolMatch service will be taking advantage of various Semantic Web and Web standards, such as OpenSearch, RESTful web services, SWRL (Semantic Web Rule Language) and SPARQL (Simple Protocol and RDF Query Language). The first version of the ToolMatch service was deployed in early fall 2014. While more complete testing is required, a number of communities besides ESIP member organizations have expressed interest in collaborating to create, test and use the service and incorporate it into their own web pages, tools and / or services including the USGS Data Catalog service, DataONE, the Deep Carbon Observatory, Virtual Solar Terrestrial Observatory (VSTO), and the U.S. Global Change Research Program. In this session, presenters will discuss the inception and development of the ToolMatch service, the collaborative process used to design, refine, and test the service, and future plans for the service.