Sample records for plumbing code section

  1. Student-Reported School Drinking Fountain Availability by Youth Characteristics and State Plumbing Codes

    PubMed Central

    Park, Sohyun; Wilking, Cara

    2014-01-01

    Introduction Caloric intake among children could be reduced if sugar-sweetened beverages were replaced by plain water. School drinking water infrastructure is dictated in part by state plumbing codes, which generally require a minimum ratio of drinking fountains to students. Actual availability of drinking fountains in schools and how availability differs according to plumbing codes is unknown. Methods We abstracted state plumbing code data and used the 2010 YouthStyles survey data from 1,196 youth aged 9 through 18 years from 47 states. We assessed youth-reported school drinking fountain or dispenser availability and differences in availability according to state plumbing codes, sociodemographic characteristics, and area-level characteristics. Results Overall, 57.3% of youth reported that drinking fountains or dispensers in their schools were widely available, 40.1% reported there were only a few, and 2.6% reported that there were no working fountains. Reported fountain availability differed significantly (P < .01) by race/ethnicity, census region, the fountain to student ratio specified in plumbing codes, and whether plumbing codes allowed substitution of nonplumbed water sources for plumbed fountains. “Widely available” fountain access ranged from 45.7% in the West to 65.4% in the Midwest and was less common where state plumbing codes required 1 fountain per more than 100 students (45.4%) compared with 1 fountain per 100 students (60.1%) or 1 fountain per fewer than 100 students (57.6%). Conclusion Interventions designed to increase consumption of water may want to consider the role of plumbing codes in availability of school drinking fountains. PMID:24742393

  2. Student-reported school drinking fountain availability by youth characteristics and state plumbing codes.

    PubMed

    Onufrak, Stephen J; Park, Sohyun; Wilking, Cara

    2014-04-17

    Caloric intake among children could be reduced if sugar-sweetened beverages were replaced by plain water. School drinking water infrastructure is dictated in part by state plumbing codes, which generally require a minimum ratio of drinking fountains to students. Actual availability of drinking fountains in schools and how availability differs according to plumbing codes is unknown. We abstracted state plumbing code data and used the 2010 YouthStyles survey data from 1,196 youth aged 9 through 18 years from 47 states. We assessed youth-reported school drinking fountain or dispenser availability and differences in availability according to state plumbing codes, sociodemographic characteristics, and area-level characteristics. Overall, 57.3% of youth reported that drinking fountains or dispensers in their schools were widely available, 40.1% reported there were only a few, and 2.6% reported that there were no working fountains. Reported fountain availability differed significantly (P < .01) by race/ethnicity, census region, the fountain to student ratio specified in plumbing codes, and whether plumbing codes allowed substitution of nonplumbed water sources for plumbed fountains. "Widely available" fountain access ranged from 45.7% in the West to 65.4% in the Midwest and was less common where state plumbing codes required 1 fountain per more than 100 students (45.4%) compared with 1 fountain per 100 students (60.1%) or 1 fountain per fewer than 100 students (57.6%). Interventions designed to increase consumption of water may want to consider the role of plumbing codes in availability of school drinking fountains.

  3. 24 CFR 200.925c - Model codes.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... DEVELOPMENT GENERAL INTRODUCTION TO FHA PROGRAMS Minimum Property Standards § 200.925c Model codes. (a... Plumbing Code, 1993 Edition, and the BOCA National Mechanical Code, 1993 Edition, excluding Chapter I, Administration, for the Building, Plumbing and Mechanical Codes and the references to fire retardant treated wood...

  4. 24 CFR 200.925c - Model codes.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... DEVELOPMENT GENERAL INTRODUCTION TO FHA PROGRAMS Minimum Property Standards § 200.925c Model codes. (a... Plumbing Code, 1993 Edition, and the BOCA National Mechanical Code, 1993 Edition, excluding Chapter I, Administration, for the Building, Plumbing and Mechanical Codes and the references to fire retardant treated wood...

  5. NORTH PORTAL-SANITARY SEWER CALCULATION-SHOP BUILDING #5006

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    S. Blackstone

    1996-01-24

    The purpose of this design calculation is to determine the demand on the waste system and to size the sanitary sewer line serving the Shop Building No.5006 in accordance with the Uniform Plumbing Code (Section 4.4.1) and US Department of Energy Order 6430.1A-1540 (Section 4.4.2).

  6. NORTH PORTAL-HOT WATER CALCULATION-SHOP BUILDING #5006

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    R. Blackstone

    The purpose of this design analysis and calculation is to determine the demand for domestic cold water and to size the supply main for the Shop Building No.5006 in accordance with the Uniform Plumbing Code (UPC) (Section 4.4.1) and the U.S. Department of Energy, Order 6430.1A-1540 (Section 4.4.2).

  7. 36 CFR 68.2 - Definitions.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... upgrading of mechanical, electrical and plumbing systems and other code-required work to make properties... 36 Parks, Forests, and Public Property 1 2011-07-01 2011-07-01 false Definitions. 68.2 Section 68.2 Parks, Forests, and Public Property NATIONAL PARK SERVICE, DEPARTMENT OF THE INTERIOR THE...

  8. 36 CFR 68.2 - Definitions.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... upgrading of mechanical, electrical and plumbing systems and other code-required work to make properties... 36 Parks, Forests, and Public Property 1 2010-07-01 2010-07-01 false Definitions. 68.2 Section 68.2 Parks, Forests, and Public Property NATIONAL PARK SERVICE, DEPARTMENT OF THE INTERIOR THE...

  9. Plumbing and Piping: Construction, Supervision, and Inspection. Course of Study.

    ERIC Educational Resources Information Center

    O'Meara, Lester; Turley, John

    This course of study on plumbing and piping is part of a construction, supervision, and inspection series, which provides instructional materials for community or junior college technical courses in the inspection program. Material covered in this volume pertains to: uniform plumbing code; pipes, fittings, supports, and connections; sewer and…

  10. Tribal Green Building Administrative Code Example

    EPA Pesticide Factsheets

    This Tribal Green Building Administrative Code Example can be used as a template for technical code selection (i.e., building, electrical, plumbing, etc.) to be adopted as a comprehensive building code.

  11. 38 CFR 39.22 - Architectural design standards.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ...) Mechanical requirements. The heating system, boilers, steam system, ventilation system and air-conditioning system shall be furnished and installed to meet all requirements of the local and State codes and... apply. (c) Plumbing requirements. Plumbing systems shall comply with all applicable local and State...

  12. Plumbing noise in multifamily dwellings: 50 years and counting

    NASA Astrophysics Data System (ADS)

    Loverde, John J.; Dong, David W.

    2005-09-01

    Historically, plumbing sound was only of concern in luxury buildings and plumbing noise was rarely addressed explicitly in building codes or design guidelines. The last couple of decades have seen marked increases in population density, occupant expectations and sensitivity to noise, and the number of noise-related lawsuits. These demographic factors have considerably increased the importance of adequately addressing plumbing noise in multifamily projects, as shown by the increasing number of published guidelines (such as in the latest ASHRAE Handbook). Over the course of our firm's history, we have attempted to determine the relationship between the sound level from plumbing systems and the acceptability to the occupants. Our current criteria for plumbing noise and the reasoning behind them is discussed, including test cases and lawsuits, as well as the materials and methods available to meet those criteria, and their impact on the design of multifamily projects.

  13. A Systems Framework for Assessing Plumbing Products-Related Water Conservation

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Williams, Alison; Dunham Whitehead, Camilla; Lutz, James

    2011-12-02

    Reducing the water use of plumbing products—toilets, urinals, faucets, and showerheads —has been a popular conservation measure. Improved technologies have created opportunities for additional conservation in this area. However, plumbing products do not operate in a vacuum. This paper reviews the literature related to plumbing products to determine a systems framework for evaluating future conservation measures using these products. The main framework comprises the following categories: water use efficiency, product components, product performance, source water, energy, and plumbing/sewer infrastructure. This framework for analysis provides a starting point for professionals considering future water conservation measures to evaluate the need for additionalmore » research, collaboration with other standards or codes committees, and attachment of additional metrics to water use efficiency (such as performance).« less

  14. Plumbing and Heating Curriculum.

    ERIC Educational Resources Information Center

    EASTCONN Regional Educational Services Center, North Windham, CT.

    Theory and experience in the following areas are included in this plumbing curriculum: (1) plumbing fixtures and heating; (2) city water service; (3) fixture roughing; (4) venting; and (5) solar heating systems. The plumbing program manual includes the following sections: (1) general objectives for grades 10, 11, and 12; (2) a list of 33 major…

  15. 24 CFR 200.925c - Model codes.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... below. (1) Model Building Codes—(i) The BOCA National Building Code, 1993 Edition, The BOCA National..., Administration, for the Building, Plumbing and Mechanical Codes and the references to fire retardant treated wood... number 2 (Chapter 7) of the Building Code, but including the Appendices of the Code. Available from...

  16. 24 CFR 200.925c - Model codes.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... below. (1) Model Building Codes—(i) The BOCA National Building Code, 1993 Edition, The BOCA National..., Administration, for the Building, Plumbing and Mechanical Codes and the references to fire retardant treated wood... number 2 (Chapter 7) of the Building Code, but including the Appendices of the Code. Available from...

  17. 24 CFR 200.925c - Model codes.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... below. (1) Model Building Codes—(i) The BOCA National Building Code, 1993 Edition, The BOCA National..., Administration, for the Building, Plumbing and Mechanical Codes and the references to fire retardant treated wood... number 2 (Chapter 7) of the Building Code, but including the Appendices of the Code. Available from...

  18. 24 CFR 3285.604 - Drainage system.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 24 Housing and Urban Development 5 2012-04-01 2012-04-01 false Drainage system. 3285.604 Section... DEVELOPMENT MODEL MANUFACTURED HOME INSTALLATION STANDARDS Ductwork and Plumbing and Fuel Supply Systems § 3285.604 Drainage system. (a) Crossovers. Multi-section homes with plumbing in more than one section...

  19. 24 CFR 3285.604 - Drainage system.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 24 Housing and Urban Development 5 2013-04-01 2013-04-01 false Drainage system. 3285.604 Section... DEVELOPMENT MODEL MANUFACTURED HOME INSTALLATION STANDARDS Ductwork and Plumbing and Fuel Supply Systems § 3285.604 Drainage system. (a) Crossovers. Multi-section homes with plumbing in more than one section...

  20. NORTH PORTAL-HOT WATER CIRCULATION PUMP CALCULATION-SHOP BUILDING #5006

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    R. Blackstone

    1996-01-25

    The purpose of this design analysis and calculation is to size a circulating pump for the service hot water system in the Shop Building 5006, in accordance with the Uniform Plumbing Code (Section 4.4.1) and U.S. Department of Energy Order 6430.1A-1540 (Section 4.4.2). The method used for the calculation is based on Reference 5.2. This consists of determining the total heat transfer from the service hot water system piping to the surrounding environment. The heat transfer is then used to define the total pumping capacity based on a given temperature change in the circulating hot water as it flows throughmore » the closed loop piping system. The total pumping capacity is used to select a pump model from manufacturer's literature. This established the head generation for that capacity and particular pump model. The total length of all hot water supply and return piping including fittings is then estimated from the plumbing drawings which defines the pipe friction losses that must fit within the available pump head. Several iterations may be required before a pump can be selected that satisfies the head-capacity requirements.« less

  1. 21 CFR 211.48 - Plumbing.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 4 2010-04-01 2010-04-01 false Plumbing. 211.48 Section 211.48 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) DRUGS: GENERAL CURRENT GOOD MANUFACTURING PRACTICE FOR FINISHED PHARMACEUTICALS Buildings and Facilities § 211.48...

  2. 24 CFR 200.925b - Residential and institutional building code comparison items.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ...., materials, allowable stresses, design; (6) Excavation; (e) Materials standards. (f) Construction components...) Plumbing fixtures; (7) Water supply and distribution; (8) Storm drain systems. (j) Electrical. (1) Wiring...

  3. 24 CFR 200.925b - Residential and institutional building code comparison items.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ...., materials, allowable stresses, design; (6) Excavation; (e) Materials standards. (f) Construction components...) Plumbing fixtures; (7) Water supply and distribution; (8) Storm drain systems. (j) Electrical. (1) Wiring...

  4. 21 CFR 110.37 - Sanitary facilities and controls.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... food-packaging materials, or for employee sanitary facilities. (b) Plumbing. Plumbing shall be of... understandable signs directing employees handling unproteced food, unprotected food-packaging materials, of food... 21 Food and Drugs 2 2011-04-01 2011-04-01 false Sanitary facilities and controls. 110.37 Section...

  5. Plumbing and Environmental Support Specialties AFSCs 552X5/566X1.

    DTIC Science & Technology

    1980-05-01

    c . Missile Water Section Personnel (N=32, GRP362) II. CHEYENNE MOUNTAIN SANITATION SPECIALISTS (N=5, GRP227) III. WATER TREATMENT PERSONNEL (N=36...Managers (N711, GRP600) b. Plumbing Section Supervisors (N=31, GRP407) c . Sanitation Superintendents (N=27, GRP325) d. Water Plant and Swimming Pool... C -> ~ I,. OCCUPATIONAL ANALYSIS PROGRAM -U! F OCCUPATIONAL MEASUREMENT CENTER ~ AIR TRAINING COMMAND RAN DOLPH AFB TEXAt 78148 80 616 2 6: TABLE OF

  6. Community-Based Policies and Support for Free Drinking Water Access in Outdoor Areas and Building Standards in U.S. Municipalities

    PubMed Central

    Onufrak, Stephen; Wilking, Cara; Cradock, Angie

    2018-01-01

    We examined community-level characteristics associated with free drinking water access policies in U.S. municipalities using data from a nationally representative survey of city managers/officials from 2,029 local governments in 2014. Outcomes were 4 free drinking water access policies. Explanatory measures were population size, rural/urban status, census region, poverty prevalence, education, and racial/ethnic composition. We used multivariable logistic regression to test differences and presented only significant findings. Many (56.3%) local governments had at least one community plan with a written objective to provide free drinking water in outdoor areas; municipalities in the Northeast and South regions and municipalities with ≤ 50% of non-Hispanic whites were less likely and municipalities with larger population size were more likely to have a plan. About 59% had polices/budget provisions for free drinking water in parks/outdoor recreation areas; municipalities in the Northeast and South regions were less likely and municipalities with larger population size were more likely to have it. Only 9.3% provided development incentives for placing drinking fountains in outdoor, publicly accessible areas; municipalities with larger population size were more likely to have it. Only 7.7% had a municipal plumbing code with a drinking fountain standard that differed from the statewide plumbing code; municipalities with a lower proportion of non-Hispanic whites were more likely to have it. In conclusion, over half of municipalities had written plans or a provision for providing free drinking water in parks, but providing development incentives or having a local plumbing code provision were rare. PMID:29713617

  7. Community-Based Policies and Support for Free Drinking Water Access in Outdoor Areas and Building Standards in U.S. Municipalities.

    PubMed

    Park, Sohyun; Onufrak, Stephen; Wilking, Cara; Cradock, Angie

    2018-04-01

    We examined community-level characteristics associated with free drinking water access policies in U.S. municipalities using data from a nationally representative survey of city managers/officials from 2,029 local governments in 2014. Outcomes were 4 free drinking water access policies. Explanatory measures were population size, rural/urban status, census region, poverty prevalence, education, and racial/ethnic composition. We used multivariable logistic regression to test differences and presented only significant findings. Many (56.3%) local governments had at least one community plan with a written objective to provide free drinking water in outdoor areas; municipalities in the Northeast and South regions and municipalities with ≤ 50% of non-Hispanic whites were less likely and municipalities with larger population size were more likely to have a plan. About 59% had polices/budget provisions for free drinking water in parks/outdoor recreation areas; municipalities in the Northeast and South regions were less likely and municipalities with larger population size were more likely to have it. Only 9.3% provided development incentives for placing drinking fountains in outdoor, publicly accessible areas; municipalities with larger population size were more likely to have it. Only 7.7% had a municipal plumbing code with a drinking fountain standard that differed from the statewide plumbing code; municipalities with a lower proportion of non-Hispanic whites were more likely to have it. In conclusion, over half of municipalities had written plans or a provision for providing free drinking water in parks, but providing development incentives or having a local plumbing code provision were rare.

  8. How to Identify Lead Free Certification Marks for Drinking Water System & Plumbing Products

    EPA Science Inventory

    The Reduction of Lead in Drinking Water Act went into effect on January 4, 2014. The Act has reduced the lead content allowed in water system and plumbing products by changing the definition of lead free in Section 1417 of the Safe Drinking Water Act (SDWA) from not more than 8% ...

  9. 49 CFR 1248.101 - Commodity codes required.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... Hardware. 343 Plumbing Fixtures and Heating Apparatus, Except Electric. 3433 Heating equipment, except electric. 344 Fabricated structural metal products. 3441 Fabricated structural metal products. 345 Bolts... fabricated pipe fittings. 35 Machinery, Except Electrical. 351 Engines and Turbines. 352 Farm Machinery and...

  10. 49 CFR 1248.101 - Commodity codes required.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... Hardware. 343 Plumbing Fixtures and Heating Apparatus, Except Electric. 3433 Heating equipment, except electric. 344 Fabricated structural metal products. 3441 Fabricated structural metal products. 345 Bolts... fabricated pipe fittings. 35 Machinery, Except Electrical. 351 Engines and Turbines. 352 Farm Machinery and...

  11. 49 CFR 1248.101 - Commodity codes required.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... Hardware. 343 Plumbing Fixtures and Heating Apparatus, Except Electric. 3433 Heating equipment, except electric. 344 Fabricated structural metal products. 3441 Fabricated structural metal products. 345 Bolts... fabricated pipe fittings. 35 Machinery, Except Electrical. 351 Engines and Turbines. 352 Farm Machinery and...

  12. 49 CFR 1248.101 - Commodity codes required.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... Hardware. 343 Plumbing Fixtures and Heating Apparatus, Except Electric. 3433 Heating equipment, except electric. 344 Fabricated structural metal products. 3441 Fabricated structural metal products. 345 Bolts... fabricated pipe fittings. 35 Machinery, Except Electrical. 351 Engines and Turbines. 352 Farm Machinery and...

  13. Fate of free chlorine in drinking water during distribution in premise plumbing.

    PubMed

    Zheng, Muzi; He, Chunguang; He, Qiang

    2015-12-01

    Free chlorine is a potent oxidizing agent and has been used extensively as a disinfectant in processes including water treatment. The presence of free chlorine residual is essential for the prevention of microbial regrowth in water distribution systems. However, excessive levels of free chlorine can cause adverse health effects. It is a major challenge to maintain appropriate levels of free chlorine residual in premise plumbing. As the first effort to assessing the fate of chlorine in premise plumbing using actual premise plumbing pipe sections, three piping materials frequently used in premise plumbing, i.e. copper, galvanized iron, and polyvinyl chloride (PVC), were investigated for their performance in maintaining free chlorine residual. Free chlorine decay was shown to follow first-order kinetics for all three pipe materials tested. The most rapid chlorine decay was observed in copper pipes, suggesting the need for higher chlorine dosage to maintain appropriate levels of free chlorine residual if copper piping is used. PVC pipes exhibited the least reactivity with free chlorine, indicative of the advantage of PVC as a premise plumbing material for maintaining free chlorine residual. The reactivity of copper piping with free chlorine was significantly hindered by the accumulation of pipe deposits. In contrast, the impact on chlorine decay by pipe deposits was not significant in galvanized iron and PVC pipes. Findings in this study are of great importance for the development of effective strategies for the control of free chlorine residual and prevention of microbiological contamination in premise plumbing.

  14. Architectural Terms for Educational Planners.

    ERIC Educational Resources Information Center

    1997

    This booklet is designed to facilitate open, clear communication between educational facility planners and the architects hired to oversee building design and construction. It provides a list of architectural, electrical, plumbing, and topographical symbols; a glossary of architectural terms; and a list of public agencies and relevant codes and…

  15. 5. EAST SECTION OF BUILDING, FIRST FLOOR, WEST ROOM. NOTE ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    5. EAST SECTION OF BUILDING, FIRST FLOOR, WEST ROOM. NOTE OVEN AT LEFT. All construction original except wood flooring, plumbing and electricity. - Ralph Izard House, Kitchen Building, 110 Broad Street, Charleston, Charleston County, SC

  16. 24 CFR 3285.603 - Water supply.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 24 Housing and Urban Development 5 2011-04-01 2011-04-01 false Water supply. 3285.603 Section 3285... § 3285.603 Water supply. (a) Crossover. Multi-section homes with plumbing in both sections require water... pressure and reduction. When the local water supply pressure exceeds 80 psi to the manufactured home, a...

  17. 24 CFR 3285.603 - Water supply.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 24 Housing and Urban Development 5 2010-04-01 2010-04-01 false Water supply. 3285.603 Section 3285... § 3285.603 Water supply. (a) Crossover. Multi-section homes with plumbing in both sections require water... pressure and reduction. When the local water supply pressure exceeds 80 psi to the manufactured home, a...

  18. 24 CFR 3285.603 - Water supply.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 24 Housing and Urban Development 5 2013-04-01 2013-04-01 false Water supply. 3285.603 Section 3285... § 3285.603 Water supply. (a) Crossover. Multi-section homes with plumbing in both sections require water... pressure and reduction. When the local water supply pressure exceeds 80 psi to the manufactured home, a...

  19. 24 CFR 3285.603 - Water supply.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 24 Housing and Urban Development 5 2012-04-01 2012-04-01 false Water supply. 3285.603 Section 3285... § 3285.603 Water supply. (a) Crossover. Multi-section homes with plumbing in both sections require water... pressure and reduction. When the local water supply pressure exceeds 80 psi to the manufactured home, a...

  20. 24 CFR 3285.603 - Water supply.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 24 Housing and Urban Development 5 2014-04-01 2014-04-01 false Water supply. 3285.603 Section 3285... § 3285.603 Water supply. (a) Crossover. Multi-section homes with plumbing in both sections require water... pressure and reduction. When the local water supply pressure exceeds 80 psi to the manufactured home, a...

  1. 24 CFR 3285.604 - Drainage system.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... require drainage system crossover connections to join all sections of the home. The crossover design... all sections of the home and designed to be located underneath the home, they must be installed and... DEVELOPMENT MODEL MANUFACTURED HOME INSTALLATION STANDARDS Ductwork and Plumbing and Fuel Supply Systems...

  2. Plumbing Specialist I, 3-21. Military Curriculum Materials for Vocational and Technical Education.

    ERIC Educational Resources Information Center

    Ohio State Univ., Columbus. National Center for Research in Vocational Education.

    These military-developed curriculum materials consist of a course description, course chart, plan of instruction, and lesson plans for use in training a plumbing specialist I. Study guides and workbooks for student use are also included. This course on Introduction to Plumbing covers plumbing safety; plumbing systems, terminology, and engineering…

  3. 75 FR 53277 - Notice of Intent To Terminate Selected National Voluntary Laboratory Accreditation Program (NVLAP...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-08-31

    ... coatings, paper and related products, building seals and sealants, plastics, plumbing, roofing, and... products, building seals and sealants, plastics, plumbing, roofing, and mattresses. The purpose of this... plumbing laboratories are also accredited for plastic and paint testing in support of plumbing testing...

  4. Plumb Fittings.

    ERIC Educational Resources Information Center

    Jahrling, Peter

    1996-01-01

    Discusses the electronic retrofitting of educational facilities plumbing systems. Some advantages of an electronic plumbing retrofit are cost, hygiene, water conservation, and meeting Americans with Disabilities Act 1990 (ADA) requirements. Issues important to the planning of a successful project are detailed. (RE)

  5. Electromechanical Technician Skills Questionnaire.

    ERIC Educational Resources Information Center

    Anoka-Hennepin Technical Coll., Minneapolis, MN.

    This document contains test items to measure the job skills of electromechanical technicians. Questions are organized in four sections that cover the following topics: (1) shop math; (2) electricity and electronics; (3) mechanics and machining; and (4) plumbing, heating, ventilation and air conditioning, and welding skills. Questions call for…

  6. 24 CFR 3285.601 - Field assembly.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... parts that are necessary to join all sections of the home and are designed to be located underneath the home. The installation instructions must be designed in accordance with applicable requirements of part... DEVELOPMENT MODEL MANUFACTURED HOME INSTALLATION STANDARDS Ductwork and Plumbing and Fuel Supply Systems...

  7. 24 CFR 3285.601 - Field assembly.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 24 Housing and Urban Development 5 2011-04-01 2011-04-01 false Field assembly. 3285.601 Section... § 3285.601 Field assembly. Home manufacturers must provide specific installation instructions for the proper field assembly of manufacturer-supplied and shipped loose ducts, plumbing, and fuel supply system...

  8. 24 CFR 3285.601 - Field assembly.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 24 Housing and Urban Development 5 2013-04-01 2013-04-01 false Field assembly. 3285.601 Section... § 3285.601 Field assembly. Home manufacturers must provide specific installation instructions for the proper field assembly of manufacturer-supplied and shipped loose ducts, plumbing, and fuel supply system...

  9. 24 CFR 3285.601 - Field assembly.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 24 Housing and Urban Development 5 2014-04-01 2014-04-01 false Field assembly. 3285.601 Section... § 3285.601 Field assembly. Home manufacturers must provide specific installation instructions for the proper field assembly of manufacturer-supplied and shipped loose ducts, plumbing, and fuel supply system...

  10. 24 CFR 3285.601 - Field assembly.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 24 Housing and Urban Development 5 2012-04-01 2012-04-01 false Field assembly. 3285.601 Section... § 3285.601 Field assembly. Home manufacturers must provide specific installation instructions for the proper field assembly of manufacturer-supplied and shipped loose ducts, plumbing, and fuel supply system...

  11. 21 CFR 211.48 - Plumbing.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... CURRENT GOOD MANUFACTURING PRACTICE FOR FINISHED PHARMACEUTICALS Buildings and Facilities § 211.48 Plumbing. (a) Potable water shall be supplied under continuous positive pressure in a plumbing system free of defects that could contribute contamination to any drug product. Potable water shall meet the...

  12. 21 CFR 211.48 - Plumbing.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... CURRENT GOOD MANUFACTURING PRACTICE FOR FINISHED PHARMACEUTICALS Buildings and Facilities § 211.48 Plumbing. (a) Potable water shall be supplied under continuous positive pressure in a plumbing system free of defects that could contribute contamination to any drug product. Potable water shall meet the...

  13. 21 CFR 211.48 - Plumbing.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... CURRENT GOOD MANUFACTURING PRACTICE FOR FINISHED PHARMACEUTICALS Buildings and Facilities § 211.48 Plumbing. (a) Potable water shall be supplied under continuous positive pressure in a plumbing system free of defects that could contribute contamination to any drug product. Potable water shall meet the...

  14. 21 CFR 211.48 - Plumbing.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... CURRENT GOOD MANUFACTURING PRACTICE FOR FINISHED PHARMACEUTICALS Buildings and Facilities § 211.48 Plumbing. (a) Potable water shall be supplied under continuous positive pressure in a plumbing system free of defects that could contribute contamination to any drug product. Potable water shall meet the...

  15. 24 CFR 3280.610 - Drainage systems.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 24 Housing and Urban Development 5 2010-04-01 2010-04-01 false Drainage systems. 3280.610 Section... DEVELOPMENT MANUFACTURED HOME CONSTRUCTION AND SAFETY STANDARDS Plumbing Systems § 3280.610 Drainage systems. (a) General. (1) Each fixture directly connected to the drainage system shall be installed with a...

  16. Impact of Plumbing Age on Copper Levels in Drinking Water

    EPA Science Inventory

    Theory and limited practical experiences suggest that higher copper levels in drinking water tap samples are typically associated with newer plumbing systems, and levels decrease with increasing plumbing age. Past researchers have developed a conceptual model to explain the “agin...

  17. Epidemiology and Ecology of Opportunistic Premise Plumbing Pathogens: Legionella pneumophila, Mycobacterium avium, and Pseudomonas aeruginosa

    EPA Science Inventory

    BACKGROUND: Legionella pneumophila, Mycobacterium avium, and Pseudomonas aeruginosa are opportunistic premise plumbing pathogens (OPPPs) that persist and grow in household plumbing, habitats they share with humans. Infections caused by these OPPPs involve individuals with preexis...

  18. Occurrence of Opportunistic Pathogens Legionella Pneumophilaand Non-tuberculous Mycobacteria in Hospital Plumbing Systems

    EPA Science Inventory

    Opportunistic premise plumbing pathogens (OPPPs) such as Legionella pneumophila, Mycobacterium avium, and Pseudomonas aeruginosa are frequently detected in the plumbing systems of large buildings. The ability of these organisms to form biofilms and to grow in phagocytic amoeba ar...

  19. Careers Canada. Volume 1, Careers in Construction.

    ERIC Educational Resources Information Center

    Department of Manpower and Immigration, Ottawa (Ontario).

    This pamphlet, published by the Canadian Department of Manpower and Immigration, is the first of a Careers-Canada series and describes careers in construction. The pamphlet is divided into six major sections: (1) history and importance; (2) nature of the work, including planning, contracting, site preparation, roofing, finishing, plumbing; (3)…

  20. 40 CFR 143.2 - Definitions.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... SECONDARY DRINKING WATER REGULATIONS § 143.2 Definitions. (a) Act means the Safe Drinking Water Act as... corrosion of piping and plumbing caused by water quality, are excluded from this definition. [44 FR 42198... 40 Protection of Environment 23 2011-07-01 2011-07-01 false Definitions. 143.2 Section 143.2...

  1. Construction Cluster Volume III [Plumbing].

    ERIC Educational Resources Information Center

    Pennsylvania State Dept. of Justice, Harrisburg. Bureau of Correction.

    The document is the third of a series, to be integrated with a G.E.D. program, containing instructional materials at the basic skills level for the construction cluster. The volume focuses on plumbing and consists of 20 instructional units which require a month of study. The units include: (1) importance of plumbing; (2) pipe and tubing…

  2. Clonality, recombination, and hybridization in the plumbing-inhabiting human pathogen Fusarium keratoplasticum inferred from multilocus sequence typing

    USDA-ARS?s Scientific Manuscript database

    Recent work has shown that Fusarium species and genotypes most commonly associated with human infections, particularly of the cornea (mycotic keratitis), are the same as those most commonly isolated from plumbing systems. The species most dominant in plumbing biofilms is Fusarium keratoplasticum, a ...

  3. KENNEDY SPACE CENTER, FLA. - Capt. Charles Plumb (USNR retired) dramatically describes some of his six years as a prisoner of war in Vietnam. Plumb was keynote speaker for the kickoff of Spaceport Super Safety and Health Day at KSC, an annual event dedicated to reinforcing safe and healthful behaviors in the workforce.

    NASA Image and Video Library

    2003-10-15

    KENNEDY SPACE CENTER, FLA. - Capt. Charles Plumb (USNR retired) dramatically describes some of his six years as a prisoner of war in Vietnam. Plumb was keynote speaker for the kickoff of Spaceport Super Safety and Health Day at KSC, an annual event dedicated to reinforcing safe and healthful behaviors in the workforce.

  4. 29 CFR 779.372 - Nonmanufacturing establishments with certain exempt employees under section 13(b)(10).

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... is no indication in the statutory language or the legislative history of any intent to provide... structures. Accordingly, servicemen checking, servicing, or repairing the plumbing, electrical, heating, air conditioning, or butane gas systems, the doors, windows, and other structural features of mobile homes to make...

  5. LEAD LEACHING FROM IN-LINE BRASS DEVICES: A CRITICAL EVALUATION OF THE EXISTING STANDARD

    EPA Science Inventory

    The ANSI/NSF 61, Section 8 standard is intended to protect the public from in-line brass plumbing products that might leach excessive levels of lead to potable water. Experiments were conducted to examine the practical rigor of this test. Contrary to expectations, the test was no...

  6. Life and Death of a Flood Basalt: Evolution of a Magma Plumbing System in the Ethiopian Low-Ti Flood Basalt Province

    NASA Astrophysics Data System (ADS)

    Krans, S. R.; Rooney, T. O.; Kappelman, J. W.; Yirgu, G.; Ayalew, D.

    2017-12-01

    Continental flood basalt provinces (CFBPs), which are thought to preserve the magmatic record of an impinging mantle plume head, offer spatial and temporal insight into melt generation processes in Large Igneous Provinces (LIPs). Despite the utility of CFBPs in probing the composition of mantle plumes, these basalts typically erupt fractionated compositions, suggestive of significant residence time in the continental lithosphere. The location and duration of this residence within the continental lithosphere provides additional insights into the flux of plume-related magmas. The NW Ethiopian plateau offers a well preserved stratigraphic section from flood basalt initiation to termination, and is thus an important target for study of CFBPs. We examine petrographic and whole rock geochemical variation within a stratigraphic framework and place these observations within the context of the magmatic evolution of the Ethiopian CFBP. We observe multiple pulses of magma recharge punctuated by brief shut-down events and an overall shallowing of the magmatic plumbing system over time. Initial flows are fed by magmas that have experienced deeper fractionation (clinopyroxene dominated and lower CaO/Al2O3 for a given MgO value), likely near the crust-mantle boundary. Subsequent flows are fed by magmas that have experienced shallower fractionation (plagioclase dominated and higher CaO/Al2O3 for a given MgO value) in addition to deeper fractionated magmas. Broad changes in flow thickness and modal mineralogy are consistent with fluctuating changes in magmatic flux through a complex plumbing system and indicate pulsed magma flux and an overall shallowing of the magmatic plumbing system over time. Pulses of less differentiated magmas (MgO > 8 wt%) and high-An composition of plagioclase megacrysts (labradorite to bytownite) suggest a constant replenishing of new primitive magma recharging the shallow plumbing system during the main phase of flood volcanism, though the magnitude of flux changes, reaching an apex prior to flood basalt termination. The origin of these pulses remains enigmatic and may relate to heterogeneities in plume composition, upwelling rate, or mantle potential temperature. The results of this study provide first order modeling constraints for future modeling of plume-lithosphere interactions.

  7. Limited School Drinking Water Access for Youth.

    PubMed

    Kenney, Erica L; Gortmaker, Steven L; Cohen, Juliana F W; Rimm, Eric B; Cradock, Angie L

    2016-07-01

    Providing children and youth with safe, adequate drinking water access during school is essential for health. This study used objectively measured data to investigate the extent to which schools provide drinking water access that meets state and federal policies. We visited 59 middle and high schools in Massachusetts during spring 2012. Trained research assistants documented the type, location, and working condition of all water access points throughout each school building using a standard protocol. School food service directors (FSDs) completed surveys reporting water access in cafeterias. We evaluated school compliance with state plumbing codes and federal regulations and compared FSD self-reports of water access with direct observation; data were analyzed in 2014. On average, each school had 1.5 (standard deviation: .6) water sources per 75 students; 82% (standard deviation: 20) were functioning and fewer (70%) were both clean and functioning. Less than half of the schools met the federal Healthy Hunger-Free Kids Act requirement for free water access during lunch; 18 schools (31%) provided bottled water for purchase but no free water. Slightly over half (59%) met the Massachusetts state plumbing code. FSDs overestimated free drinking water access compared to direct observation (96% FSD reported vs. 48% observed, kappa = .07, p = .17). School drinking water access may be limited. In this study, many schools did not meet state or federal policies for minimum student drinking water access. School administrative staff may not accurately report water access. Public health action is needed to increase school drinking water access. Copyright © 2016 Society for Adolescent Health and Medicine. Published by Elsevier Inc. All rights reserved.

  8. Military Curriculum Materials for Vocational and Technical Education. Plumbing Specialist 3-2. Volume 1.

    ERIC Educational Resources Information Center

    Ohio State Univ., Columbus. National Center for Research in Vocational Education.

    This individualized, self-paced course for independent study in plumbing was adapted from military curriculum materials for use in vocational education. The course provides the theory to accompany on-the-job training in the plumbing trade. It provides basic information on job safety and tools, waste systems, and water supply systems and fixtures.…

  9. Investigation of the motion processes of wastewater in sewerage of high-rise buildings

    NASA Astrophysics Data System (ADS)

    Pomogaeva, Valentina; Metechko, Lyudmila; Prokofiev, Dmitry; Narezhnaya, Tamara

    2018-03-01

    When designing, constructing and operating sewage pipelines in high-rise buildings, issues of failure-free operation of a network arise. Investigation of the processes of wastewater moving allows identifying problem areas during operation, assessing the possibility of obstructions and breakdowns of plumbing traps on the gravity drainage sections of the pipeline. The article performs the schemes of the water outflow from the floor sewer into the riser, including the places where the riser is bent, of air delivery to the working riser under the change of the direction of drain movement with the dropout line set-up, with the installation of an automatic anti-vacuum valve, with the installation of the ventilation pipeline. Investigations of the process of sewage waste flow in a sewage riser were carried out, in order to select the appropriate structure. The authors consider structure features of some sections of sewerage in high-rise buildings. The exhaustion value in the riser is determined from the rarefactions that occur below the compressed cross-section of the riser and the loss of the air flow pressure coming from the atmosphere into the riser during the deflooding of the liquid. Preventing the formation of obstructions and breakdowns of plumbing traps is an integral part of sewage networks.

  10. Mississippi Curriculum Framework for Plumber and Pipefitter/Steamfitter (Program CIP: 46.0501--Plumber and Pipefitter). Postsecondary Programs.

    ERIC Educational Resources Information Center

    Mississippi Research and Curriculum Unit for Vocational and Technical Education, State College.

    This document, which is intended for use by community and junior colleges throughout Mississippi, contains curriculum frameworks for the course sequences in the plumber and pipefitter/steamfitter cluster. Presented in the introductory section are program descriptions and suggested course sequences for the plumbing and pipefitting programs. Section…

  11. Progressive reactivation of the volcanic plumbing system beneath Tolbachik volcano (Kamchatka, Russia) revealed by long-period seismicity

    NASA Astrophysics Data System (ADS)

    Frank, William B.; Shapiro, Nikolaï M.; Gusev, Alexander A.

    2018-07-01

    After lying dormant for 36 yr, the Tolbachik volcano of the Klyuchevskoy group started to erupt on 27 November 2012. We investigate the preparatory phase of this eruption via a statistical analysis of the temporal behavior of long-period (LP) earthquakes that occurred beneath this volcanic system. The LP seismicity occurs close to the surface beneath the main volcanic edifices and at 30 km depth in the vicinity of a deep magmatic reservoir. The deep LP earthquakes and those beneath the Klyuchevskoy volcano occur quasi-periodically, while the LP earthquakes beneath Tolbachik are clustered in time. As the seismicity rate increased beneath Tolbachik days before the eruption, the level of the time clustering decreased. We interpret this as a manifestation of the evolution of the volcano plumbing system. We suggest that when a plumbing system awakes after quiescence, multiple cracks and channels are reactivated simultaneously and their interaction results in the strong time clustering of LP earthquakes. With time, this network of channels and cracks evolves into a more stable state with an overall increased permeability, where fluids flow uninhibited throughout the plumbing system except for a few remaining impediments that continue to generate seismic radiation. The inter-seismic source interaction and the level of earthquake time clustering in this latter state is weak. This scenario suggests that the observed evolution of the statistical behavior of the shallow LP seismicity beneath Tolbachik is an indicator of the reactivation and consolidation of the near-surface plumbing system prior to the Tolbachik eruption. The parts of the plumbing system above the deep magmatic reservoir and beneath the Klyuchevskoy volcano remain in nearly permanent activity, as demonstrated by the continuous occurrence of the deep LP earthquakes and very frequent Klyuchevskoy eruptions. This implies that these parts of the plumbing system remain in a stable permeable state and contain a few weakly interacting seismogenic sources. Our results provide new constraints on future mechanical models of the magmatic plumbing systems and demonstrate that the level of time clustering of LP earthquakes can be a useful parameter to infer information about the state of the plumbing system.

  12. Domestic water conservation potential in Saudi Arabia

    NASA Astrophysics Data System (ADS)

    Abdulrazzak, Mohammed J.; Khan, Muhammad Z. A.

    1990-03-01

    Domestic water conservation in arid climates can result in efficient utilization of existing water supplies. The impacts of conservation measures such as the installation of water-saving devices, water metering and pricing schemes, water rationing and public awareness programs, strict plumbing codes, penalties for wasting water, programs designed to reduce leakage from public water lines and within the home, water-efficient landscaping, economic and ethical incentives are addressed in detail. Cost savings in arid climates, with particular reference to Saudi Arabia, in relation to some conservation techniques, are presented. Water conservation technology and tentative demonstration and implementation of water conservation programs are discussed.

  13. TMA Chemical Release Payloads for Stratospheric Wind Measurements Auroral E Program and Related Programs

    DTIC Science & Technology

    1982-03-15

    this work was to provide a piston tank filled with trimethyl aluminum for release as a trail in the upper atmosphere. This payload was launched from the...trail payloads. II. PAYLOAD DESCRIPTION The payload consists of a programmer section with plumbing and a piston tank section. The outer shell of the...payload is the wall of the piston tank . The liquid side of the piston tank is filled with 20 pounds of tri- methyl- aluminum (TMA). After filling the

  14. Continuous sterilization of plumbing systems

    NASA Technical Reports Server (NTRS)

    Bryan, C. J.; Moyers, C. V.; Wright, E. E., Jr.

    1979-01-01

    Continuous sterilization of plumbing, such as in hospitals, clinics, and biological testing laboratories is possible with ethylene oxide/Freon 12 (ETO/F-12) humidifier developed for sterilization of potable water systems.

  15. KENNEDY SPACE CENTER, FLA. - Capt. Charles Plumb (USNR retired) begins his dramatic presentation of his six years as a prisoner of war in Vietnam. The block of light on the stage represented the size of the cell he was confined in. Plumb was keynote speaker for the kickoff of Spaceport Super Safety and Health Day at KSC, an annual event dedicated to reinforcing safe and healthful behaviors in the workforce.

    NASA Image and Video Library

    2003-10-15

    KENNEDY SPACE CENTER, FLA. - Capt. Charles Plumb (USNR retired) begins his dramatic presentation of his six years as a prisoner of war in Vietnam. The block of light on the stage represented the size of the cell he was confined in. Plumb was keynote speaker for the kickoff of Spaceport Super Safety and Health Day at KSC, an annual event dedicated to reinforcing safe and healthful behaviors in the workforce.

  16. 33. Second floor, detail of plumbing access area Veterans ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    33. Second floor, detail of plumbing access area - Veterans Administration Center, Officers Duplex Quarters, 5302 East Kellogg (Legal Address); 5500 East Kellogg (Common Address), Wichita, Sedgwick County, KS

  17. APPLICATION OF EPANET TO UNDERSTAND LEAD RELEASE IN PREMISE PLUMBING

    EPA Science Inventory

    This presentation describes the factors affecting lead concentration in tap water using an EPANET hydraulic model for a simplified home model, a realistic home model, and EPA's experimental home plumbing system.

  18. Eligibility of Indoor Plumbing Under Alaska Sanitation Infrastructure Grant Program

    EPA Pesticide Factsheets

    Memorandum response to questions that relate to whether indoor plumbing of homes, as part of a wastewater construction project, is an eligible cost item under the EPA Alaska Sanitation Infrastructure Grant Program.

  19. 9 CFR 354.223 - Drainage and plumbing.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... approved traps and vents. The drainage and plumbing system must permit the quick runoff of all water from... covers. (3) Toilet soil lines shall be separate from house drainage lines to a point outside the...

  20. Simple, Internally Adjustable Valve

    NASA Technical Reports Server (NTRS)

    Burley, Richard K.

    1990-01-01

    Valve containing simple in-line, adjustable, flow-control orifice made from ordinary plumbing fitting and two allen setscrews. Construction of valve requires only simple drilling, tapping, and grinding. Orifice installed in existing fitting, avoiding changes in rest of plumbing.

  1. Release of drinking water contaminants and odor impacts caused by green building cross-linked polyethylene (PEX) plumbing systems.

    PubMed

    Kelley, Keven M; Stenson, Alexandra C; Dey, Rajarashi; Whelton, Andrew J

    2014-12-15

    Green buildings are increasingly being plumbed with crosslinked polyethylene (PEX) potable water pipe. Tap water quality was investigated at a six month old plumbing system and chemical and odor quality impacts of six PEX pipe brands were examined. Eleven PEX related contaminants were found in the plumbing system; one regulated (toluene) and several unregulated: Antioxidant degradation products, resin solvents, initiator degradation products, or manufacturing aides. Water chemical and odor quality was monitored for new PEX-a, -b and -c pipes with (2 mg/L free chlorine) and without disinfectant over 30 days. Odor and total organic carbon (TOC) levels decreased for all pipes, but odor remained greater than the USA's Environmental Protection Agency's (USEPA) secondary maximum contaminant level. Odors were not attributed to known odorants ethyl-tert-butyl ether (ETBE) or methyl-tert-butyl ether (MTBE). Free chlorine caused odor levels for PEX-a1 pipe to increase from 26 to 75 threshold odor number (TON) on day 3 and affected the rate at which TOC changed for each brand over 30 days. As TOC decreased, the ultraviolet absorbance at 254 nm increased. Pipes consumed as much as 0.5 mg/L as Cl2 during each 3 day stagnation period. Sixteen organic chemicals were identified, including toluene, pyridine, methylene trichloroacetate and 2,4-di-tert-butylphenol. Some were also detected during the plumbing system field investigation. Six brands of PEX pipes sold in the USA and a PEX-a green building plumbing system impacted chemical and drinking water odor quality. Copyright © 2014 Elsevier Ltd. All rights reserved.

  2. 77 FR 18687 - Guidance Regarding Deduction and Capitalization of Expenditures Related to Tangible Property...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-03-28

    ... 20. * * * The plumbing fixtures in all the restrooms perform a discrete and critical function in the... fixtures in the hotel building perform a discrete and critical function in the operation of the plumbing...

  3. 7. PHOTOCOPY, PLUMBING AND MECHANICAL PLAN AND DETAILS FOR UNDERGROUND ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    7. PHOTOCOPY, PLUMBING AND MECHANICAL PLAN AND DETAILS FOR UNDERGROUND STORAGE MAGAZINES AND LAUNCHER-LOADER ASSEMBLIES. - NIKE Missile Base SL-40, Underground Storage Magazines & Launcher-Loader Assemblies, Southwesternmost end of launch area, Hecker, Monroe County, IL

  4. Occurrence of Opportunistic Pathogens Legionella pneumophila and non-tuberculous mycobacteria in hospital plumbing systems

    EPA Science Inventory

    Occurrence of Opportunistic Pathogens Legionella pneumophila and non-tuberculous mycobacteria in hospital plumbing systems Jill Hoelle, Michael Coughlin, Elizabeth Sotkiewicz, Jingrang Lu, Stacy Pfaller, Mark Rodgers, and Hodon Ryu U.S. Environmental Protection Agency, Cincinnati...

  5. RESEARCH NEEDS FOR OPPORTUNISTIC PATHOGENS IN PREMISE PLUMBING

    EPA Science Inventory

    EXECUTIVE SUMMARY OBJECTIVES. The objectives of this project were to: 1.) Host an expert workshop to identify research needs for opportunistic premise (i.e., building) plumbing pathogens (OPPPs); 2.) With the assistance of the workshop participants, prepare this research repor...

  6. Impact of Water Quality on Chlorine Demand of Corroding Copper

    EPA Science Inventory

    Copper is the most widely used material in drinking water premise plumbing systems. In buildings such as hospitals, large and complicated plumbing networks make it difficult to maintain good water quality. Sustaining safe disinfectant residuals throughout a building to protect ag...

  7. An Analysis of the Plumbing Occupation.

    ERIC Educational Resources Information Center

    Carlton, Earnest L.; Hollar, Charles E.

    The occupational analysis contains a brief job description, presenting for the occupation of plumbing 12 detailed task statements which specify job duties (tools, equipment, materials, objects acted upon, performance knowledge, safety considerations/hazards, decisions, cues, and errors) and learning skills (science, mathematics/number systems, and…

  8. Environmental Assessment for Phase 6 and Phase 7, Replace Family Housing at Malmstrom Air Force Base, Montana

    DTIC Science & Technology

    2005-01-01

    resulting in severe constriction and pipe leakage, and plumbing fixtures are worn and discolored and require replacing. Bedrooms are small and lack...construction. Damaged or degraded sections of piping will be replaced as needed during construction. New electrical circuits and supporting infrastructure...drainage at the site occurs primarily through open storm ditches, swales and underground pipes and discharge outfalls. Storm water discharge is

  9. Vocational Preparation Curriculum: Plumbing.

    ERIC Educational Resources Information Center

    Usoro, Hogan

    This document is a curriculum guide for instructors teaching vocational preparation for plumbing to special needs students. The purpose of the curriculum guide is to provide minimum skills for disadvantaged and handicapped students entering the mainstream; to supplement vocational skills of those students already in a regular training program…

  10. Importance of Geodetically Controlled Topography to Constrain Rates of Volcanism and Internal Magma Plumbing Systems

    NASA Astrophysics Data System (ADS)

    Glaze, L. S.; Baloga, S. M.; Garvin, J. B.; Quick, L. C.

    2014-05-01

    Lava flows and flow fields on Venus lack sufficient topographic data for any type of quantitative modeling to estimate eruption rates and durations. Such modeling can constrain rates of resurfacing and provide insights into magma plumbing systems.

  11. 24 CFR 3280.607 - Plumbing fixtures.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... less than 11/2 inches for sinks of two or more compartments, dishwashers, clothes washing machines... of Test for Safety Glazing Materials Used in Buildings, ANSI Z97.1-1984. (iv) Prefabricated plumbing fixtures shall be approved or listed. (4) Dishwashing machines. (i) A dishwashing machine shall not be...

  12. 24 CFR 3280.607 - Plumbing fixtures.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... less than 11/2 inches for sinks of two or more compartments, dishwashers, clothes washing machines... of Test for Safety Glazing Materials Used in Buildings, ANSI Z97.1-1984. (iv) Prefabricated plumbing fixtures shall be approved or listed. (4) Dishwashing machines. (i) A dishwashing machine shall not be...

  13. 24 CFR 3280.607 - Plumbing fixtures.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... less than 11/2 inches for sinks of two or more compartments, dishwashers, clothes washing machines... of Test for Safety Glazing Materials Used in Buildings, ANSI Z97.1-1984. (iv) Prefabricated plumbing fixtures shall be approved or listed. (4) Dishwashing machines. (i) A dishwashing machine shall not be...

  14. 24 CFR 3280.607 - Plumbing fixtures.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... less than 11/2 inches for sinks of two or more compartments, dishwashers, clothes washing machines... of Test for Safety Glazing Materials Used in Buildings, ANSI Z97.1-1984. (iv) Prefabricated plumbing fixtures shall be approved or listed. (4) Dishwashing machines. (i) A dishwashing machine shall not be...

  15. Building Trades. Carpentry, Electrical Wiring, Plumbing.

    ERIC Educational Resources Information Center

    Missouri Univ., Columbia. Instructional Materials Lab.

    This curriculum guide contains 21 units of self-paced, self-contained instructional materials in the complete building trades curriculum. It is divided into vocational areas of carpentry, electrical wiring, and plumbing. The purpose of the curriculum is to provide minimum skills for disadvantaged and handicapped students entering mainstream…

  16. Limited school drinking water access for youth

    PubMed Central

    Kenney, Erica L.; Gortmaker, Steven L.; Cohen, Juliana F.W.; Rimm, Eric B.; Cradock, Angie L.

    2016-01-01

    PURPOSE Providing children and youth with safe, adequate drinking water access during school is essential for health. This study utilized objectively measured data to investigate the extent to which schools provide drinking water access that meets state and federal policies. METHODS We visited 59 middle and high schools in Massachusetts during spring 2012. Trained research assistants documented the type, location, and working condition of all water access points throughout each school building using a standard protocol. School food service directors (FSDs) completed surveys reporting water access in cafeterias. We evaluated school compliance with state plumbing codes and federal regulations and compared FSD self-reports of water access with direct observation; data were analyzed in 2014. RESULTS On average, each school had 1.5 (SD: 0.6) water sources per 75 students; 82% (SD: 20) were functioning, and fewer (70%) were both clean and functioning. Less than half of the schools met the federal Healthy Hunger Free Kids Act requirement for free water access during lunch; 18 schools (31%) provided bottled water for purchase but no free water. Slightly over half (59%) met the Massachusetts state plumbing code. FSDs overestimated free drinking water access compared to direct observation (96% FSD-reported versus 48% observed, kappa=0.07, p=0.17). CONCLUSIONS School drinking water access may be limited. In this study, many schools did not meet state or federal policies for minimum student drinking water access. School administrative staff may not accurately report water access. Public health action is needed to increase school drinking water access. IMPLICATIONS AND CONTRIBUTIONS Adolescents’ water consumption is lower than recommended. In a sample of Massachusetts middle and high schools, about half did not meet federal and state minimum drinking water access policies. Direct observation may improve assessments of drinking water access and could be integrated into routine school food service monitoring protocols. PMID:27235376

  17. 24 CFR 3280.602 - Definitions.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... operator. Plumbing appurtenance: means a manufactured device, or a prefabricated assembly, or an on-the-job assembly of component parts, and which is an adjunct to the basic piping system and plumbing system and... following two types, or a combination of the two: (a) Self-siphonage resulting from vacuum in a fixture...

  18. 78 FR 13872 - Proposed Information Collection Request; Comment Request; EPA's WaterSense Program (Renewal); EPA...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-03-01

    ... profanity, threats, information claimed to be Confidential Business Information (CBI) or other information...-efficient products and use water-efficient practices. As part of strategic planning efforts, EPA encourages... Reporting Form Promotional partners 6100-09 Manufacturers (separate forms for plumbing and non- plumbing...

  19. Plumbing and Sewage Disposal.

    ERIC Educational Resources Information Center

    Sutliff, Ronald D.; And Others

    This self-study course is designed to familiarize Marine enlisted personnel with the principles of plumbing and sewage disposal used by Marine Hygiene Equipment Operators to perform their mission. The course contains three study units. Each study unit begins with a general objective, which is a statement of what the student should learn from the…

  20. LEACHING OF METALS FROM HOUSEHOLD PLUMBING MATERIALS: IMPACT OF HOME WATER SOFTENERS

    EPA Science Inventory

    A pilot plant study was conducted to evaluate the effects of household ion exchange softening on the leaching of metals from home plumbing materials. The study was conducted in two phases on two different water qualities. Phase I was conducted using a finished tap water having a...

  1. 16 CFR 305.16 - Labeling and marking for plumbing products.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... CONGRESS RULE CONCERNING DISCLOSURES REGARDING ENERGY CONSUMPTION AND WATER USE OF CERTAIN HOME APPLIANCES AND OTHER PRODUCTS REQUIRED UNDER THE ENERGY POLICY AND CONSERVATION ACT (âAPPLIANCE LABELING RULEâ... 16 Commercial Practices 1 2011-01-01 2011-01-01 false Labeling and marking for plumbing products...

  2. 16 CFR 305.16 - Labeling and marking for plumbing products.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... CONGRESS RULE CONCERNING DISCLOSURES REGARDING ENERGY CONSUMPTION AND WATER USE OF CERTAIN HOME APPLIANCES AND OTHER PRODUCTS REQUIRED UNDER THE ENERGY POLICY AND CONSERVATION ACT (âAPPLIANCE LABELING RULEâ... 16 Commercial Practices 1 2013-01-01 2013-01-01 false Labeling and marking for plumbing products...

  3. 16 CFR 305.16 - Labeling and marking for plumbing products.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... CONGRESS RULE CONCERNING DISCLOSURES REGARDING ENERGY CONSUMPTION AND WATER USE OF CERTAIN HOME APPLIANCES AND OTHER PRODUCTS REQUIRED UNDER THE ENERGY POLICY AND CONSERVATION ACT (âAPPLIANCE LABELING RULEâ... 16 Commercial Practices 1 2012-01-01 2012-01-01 false Labeling and marking for plumbing products...

  4. Introduction to Plumbing. Introduction to Construction Series. Instructor Edition.

    ERIC Educational Resources Information Center

    Oklahoma State Dept. of Vocational and Technical Education, Stillwater. Curriculum and Instructional Materials Center.

    This competency-based curriculum guide on the specialty area of plumbing is part of the Introduction to Construction series. The series is designed with the flexible training requirements of open shop contractors, preapprenticeship programs, multicraft high school programs, technology education programs, and cooperative education programs in mind.…

  5. KSC-03PD-2830

    NASA Technical Reports Server (NTRS)

    2003-01-01

    KENNEDY SPACE CENTER, FLA. Capt. Charles Plumb (USNR retired) dramatically describes some of his six years as a prisoner of war in Vietnam. Plumb was keynote speaker for the kickoff of Spaceport Super Safety and Health Day at KSC, an annual event dedicated to reinforcing safe and healthful behaviors in the workforce.

  6. Plumbing Curriculum Guide. Construction Trades. Michigan Trade and Industrial Education.

    ERIC Educational Resources Information Center

    Michigan State Univ., East Lansing. Coll. of Agriculture and Natural Resources Education Inst.

    This task-based curriculum guide is intended to help secondary teachers provide relevant training for an entry-level job in plumbing. Introductory materials include background information on trade and industrial education and program goals and safety information. Descriptions follow of the construction trades program, vocational cooperative…

  7. Frugal Flow

    ERIC Educational Resources Information Center

    Nortier, Richard

    2008-01-01

    The plumbing products most appropriate for a high-end hotel or executive restroom will differ from those most suited for school and university restrooms, where large numbers of boisterous students may charge through the doors all day long. However, installing plumbing that can stand up to rough-and-tough student use does not have to compromise…

  8. Plumbing. Trade and Industrial Education Course of Study.

    ERIC Educational Resources Information Center

    Erisman, Kenneth E., Comp.; Gerberich, Charles F., Comp.

    Intended to be used as a teaching and learning guide, the basic course of study presented in these materials is designed to provide the essentials of the plumbing trade, insuring that students who successfully complete the course will have sufficient competencies for initial employment and ample orientation for growth and development. The course…

  9. Differential growth of Legionella pneumophila strains within a range of amoebae at various temperatures associated with in-premise plumbing

    EPA Science Inventory

    The potential effect of in-premise plumbing temperatures (24, 32, 37 and 41 °C) on the growth of five different L. pneumophila strains within free-living amoebae (Acanthamoeba polyphaga, Hartmannella vermiformis and Naegleria fowleri) was examined. Compared to controls only fed E...

  10. The Financial Crisis and the Death (or Hegemony) of Development Economics

    ERIC Educational Resources Information Center

    Rajan, Raghuram

    2010-01-01

    "Development economics" was the study of how to create the plumbing that would allow developing economies to become developed. The financial crisis leads us to question whether industrialized countries have the plumbing problem solved and thus leads us to question whether we need a development economics that is separate from macroeconomics.…

  11. How to Identify Lead-Free Certification Marks for Drinking Water System & Plumbing Materials

    EPA Science Inventory

    In 2011, Congress passed the “Reduction of Lead in Drinking Water Act,” which effectively reduces the lead content allowed in material used for potable water plumbing. The Act, which will go into effect on January 4, 2014, changes the definition of “lead-free” by reducing allowed...

  12. How to Identify Lead-Free Certification Marks for Drinking Water System & Plumbing Materials - Presentation

    EPA Science Inventory

    In 2011, Congress passed the “Reduction of Lead in Drinking Water Act,” which effectively reduces the lead content allowed in material used for potable water plumbing. The Act, which will go into effect on January 4, 2014, changes the definition of “lead-free” by reducing allowed...

  13. Plumbing and Pipefitting. Student Learning Guides.

    ERIC Educational Resources Information Center

    Ridge Vocational-Technical Center, Winter Haven, FL.

    These 32 learning guides are self-instructional packets for 32 tasks identified as essential for performance on an entry-level job in plumbing and pipefitting. Each guide is based on a terminal performance objective (task) and 1-4 enabling objectives. For each enabling objective, some or all of these materials may be presented: learning steps…

  14. Working as a Plumber; Construction 7-9--Prevocational: 5846.09.

    ERIC Educational Resources Information Center

    Dade County Public Schools, Miami, FL.

    The beginning course involves the student with practices in plumbing, referring to the various systems of pipes and tubes that carry liquids and gases from a source to a building. Course content includes goals, specific objectives, orientation, selecting hardware, tools and equipment, prescription for faulty fixtures, and plumbing installations.…

  15. Teaching Hands-on Plumbing in a County Facility: A Working Plumber's Experience.

    ERIC Educational Resources Information Center

    Mattucci, Robert F.; Johnson, Meghan W.

    2003-01-01

    A plumbing program teaches minimum-security inmates technical skills, decision making, motivation, and teamwork. In New York, 80 inmates have completed the program and 2 have become apprentices upon release. The course, combined with substance abuse treatment and high school equivalency, seeks to counteract recidivism with practical life skills.…

  16. Interactive Effects of Corrosion, Copper, and Chloramines on Legionella and Mycobacteria in Hot Water Plumbing.

    PubMed

    Rhoads, William J; Pruden, Amy; Edwards, Marc A

    2017-06-20

    Complexities associated with drinking water plumbing systems can result in undesirable interactions among plumbing components that undermine engineering controls for opportunistic pathogens (OPs). In this study, we examine the effects of plumbing system materials and two commonly applied disinfectants, copper and chloramines, on water chemistry and the growth of Legionella and mycobacteria across a transect of bench- and pilot-scale hot water experiments carried out with the same municipal water supply. We discovered that copper released from corrosion of plumbing materials can initiate evolution of >1100 times more hydrogen (H 2 ) from water heater sacrificial anode rods than does presence of copper dosed as soluble cupric ions. H 2 is a favorable electron donor for autotrophs and causes fixation of organic carbon that could serve as a nutrient for OPs. Dosed cupric ions acted as a disinfectant in stratified stagnant pipes, inhibiting culturable Legionella and biofilm formation, but promoted Legionella growth in pipes subject to convective mixing. This difference was presumably due to continuous delivery of nutrients to biofilm on the pipes under convective mixing conditions. Chloramines eliminated culturable Legionella and prevented L. pneumophila from recolonizing biofilms, but M. avium gene numbers increased by 0.14-0.76 logs in the bulk water and were unaffected in the biofilm. This study provides practical confirmation of past discrepancies in the literature regarding the variable effects of copper on Legionella growth, and confirms prior reports of trade-offs between Legionella and mycobacteria if chloramines are applied as secondary disinfectant residual.

  17. Complexities in Shallow Magma Transport at Kilauea (Invited)

    NASA Astrophysics Data System (ADS)

    Swanson, D. A.

    2013-12-01

    The standard model of Kilauea's shallow plumbing system includes magma storage under the caldera and conduits in the southwest rift zone (SWRZ) and the east rift zone (ERZ). As a field geologist, I find that seemingly aberrant locations and trends of some eruptive vents indicate complexities in shallow magma transport not addressed by the standard model. This model is not wrong but instead incomplete, because it does not account for the development of offshoots from the main plumbing. These offshoots supply magma to the surface at places that tell us much about the complicated stress system within the volcano. Perhaps most readily grasped are fissures peripheral to the north and south sides of the caldera. Somehow magma can apparently be injected into caldera-bounding faults from the summit reservoir complex, but the process and pathways are unclear. Of more importance is the presence of fissures with ENE trends on the east side of the caldera, including Kilauea Iki. Is this a rift zone that forms an acute angle with the ERZ? I think there is another explanation: the main part of the ERZ has migrated ~5 km SSE during the past few tens of thousands of years owing to seaward movement of the south flank, but older parts of the rift zone can be reactivated. The fissures east of the caldera have the ERZ trend and may record such reactivation; this interpretation includes the location of the largest eruption (15th century) known from Kilauea. Whether or not this interpretation has validity, the question remains: what changes in the plumbing system allow magma to erupt east of the caldera? The SWRZ can be divided into two sections, the SWRZ proper and the seismically active part (SASWRZ) southeast of the SWRZ. The total width of both sections is ~4 km. The SWRZ might be migrating SSE, as is the ERZ. Fissures in the SWRZ proper trend SW. Fissures in the SASWRZ, however, have ENE trends like that of the ERZ, although, because of en echelon offsets, the fissure zone itself trends SW. Seismicity in the SASWRZ also trends SW. This complicated area is not adequately addressed by the standard model. Possibly stresses related to seaward spreading control surface fracture patterns in the SASWRZ, but stresses related to the summit reservoir control somewhat deeper magma movement. Perhaps the hyaloclastic zone, formed as Kilauea grew above sea level, separates the two stress layers. Whatever the explanation, the observations demand attention because of the disparity between fracture trend and magma movement. In the upper ERZ, surface fractures and eruptive fissures trend ENE, but the overall magma plumbing, as defined by seismicity and pit craters, trends SE. Again a layered stress system is one interpretation, with seaward migration of the ERZ superposed on the plumbing connecting the summit magma reservoir with the ERZ. Clearly this area demands close scrutiny, since most of the magma erupted from Kilauea passes through the upper ERZ. Dikes also intrude the Koa`e fault system, which connects the active ERZ with the SWRZ. Faults and fractures in the Koa`e and ERZ have the same ENE fracture trend and structural style. Vents in the Koa`e occur ~6 km west of the ERZ. Deformation measurements show that magma intrudes the Koa`e during eruptions in the adjacent ERZ. What drives the magma to move so far from well established conduits? Once more, the observations raise more questions than answers.

  18. Plumbing. Pre-Apprenticeship Phase 2 Training. Student Training Modules.

    ERIC Educational Resources Information Center

    Brath, Ed

    These 26 Student Training Modules on plumbing comprise one of nine sets of self-paced learning modules developed for Pre-Apprenticeship Phase 2 Training. (A companion instructor's guide is available separately as CE 031 577.) The modules are designed to impart trade knowledge and skills to the student. Each module contains some or all of the…

  19. Home Plumbing Simulator for the Study of Copper and Lead Corrosion and Release, Disinfectant Demand, and Biofilm Activity - abstract

    EPA Science Inventory

    The corrosion of household or premise plumbing materials (such as copper, brass, and solder) and the metal release that results from that corrosion can cause numerous problems, ranging from “blue” water to copper pinhole leaks. If left untreated, these problems can lead to health...

  20. T & I--Plumbing. Kit No. 67. Instructor's Manual [and] Student Learning Activity Guide.

    ERIC Educational Resources Information Center

    Lanford, Frank

    An instructor's manual and student activity guide on plumbing are provided in this set of prevocational education materials which focuses on the vocational area of trade and industry. (This set of materials is one of ninety-two prevocational education sets arranged around a cluster of seven vocational offerings: agriculture, home economics,…

  1. Plumbing Specialist II & III, 3-22. Military Curriculum Materials for Vocational and Technical Education.

    ERIC Educational Resources Information Center

    Ohio State Univ., Columbus. National Center for Research in Vocational Education.

    These military-developed curriculum materials consist of a course description, course chart, plan of instruction, lesson plans, study guides, and workbooks for use in training plumbing specialists II and III. Covered in the course blocks are building waste systems and exterior and interior supply systems. Course block II, on building waste…

  2. Plumbing Specialist IV & V, 3-23. Military Curriculum Materials for Vocational and Technical Education.

    ERIC Educational Resources Information Center

    Ohio State Univ., Columbus. National Center for Research in Vocational Education.

    These military-developed curriculum materials consist of a course description, course chart, plan of instruction, lesson plans, study guides, and workbooks for use in training plumbing specialists IV and V. Covered in the course blocks are fixtures and appurtenances and utility equipment. Block IV on fixtures and appurtenances deals with…

  3. Plumbing. Manual of Instruction for the Plumbing Trade. [Revised Edition].

    ERIC Educational Resources Information Center

    British Columbia Dept. of Education, Victoria.

    This manual for the classroom instructor provides the basic trade knowledge and product data required by the student and the graduate plumber. It is also useful as an on-the-job reference. First, an information page on metric conversion is provided. The contents are presented in what is considered to be the most logical instructional sequence.…

  4. Funneling toward Authenticity: A Response to "Intimacy and Ethical Behavior in Adult Education"

    ERIC Educational Resources Information Center

    Callahan, Jamie L.

    2009-01-01

    In his article, "Intimacy and Ethical Action in Adult Education," Donovan Plumb (2009) suggests a pathway for adult educators to achieve the type of world that Gunter (1996) envisions. Plumb argues that the personal qualities that enable people to have fulfilling (sexually) intimate relationships are also those that enable ethical action on the…

  5. Sidelooking laser altimeter for a flight simulator

    NASA Technical Reports Server (NTRS)

    Webster, L. D. (Inventor)

    1983-01-01

    An improved laser altimeter for a flight simulator which allows measurement of the height of the simulator probe above the terrain directly below the probe tip is described. A laser beam is directed from the probe at an angle theta to the horizontal to produce a beam spot on the terrain. The angle theta that the laser beam makes with the horizontal is varied so as to bring the beam spot into coincidence with a plumb line coaxial with the longitudinal axis of the probe. A television altimeter camera observes the beam spot and has a raster line aligned with the plumb line. Spot detector circuit coupled to the output of the TV camera monitors the position of the beam spot relative to the plumb line.

  6. Safe hot tap water: knowledge, attitude and practice of plumbers, students and regulatory authorities following the introduction of plumbing regulations in NSW, Australia.

    PubMed

    Harvey, Lara A; Poulos, Roslyn G; Finch, Caroline F; Harvey, John G

    2011-03-01

    Regulations to restrict the temperature of domestic hot tap water were introduced in NSW in 1999. This study investigates the impact of the regulations on the knowledge, attitude and practice of workforce professionals responsible for their uptake and enforcement. Telephone surveys were conducted with a random sample of 110 plumbers and 30 regulating authorities. Surveys were recorded, transcribed and coded. Written questionnaires were completed by 151 plumbing students. The regulations are well known and supported by the majority of plumbers, students and regulators; however 75% of plumbers reported customer dissatisfaction with them. Only a minority of plumbers (11%), students (7%) and regulators (27%) correctly appreciated the impact of a decrease in water temperature in reducing burns. This study identifies the need to improve plumbers and students' understanding of the safety issues underlying the regulations in order to promote more effective advocacy for homes not currently covered by the regulations, and to provide more public education to increase acceptance of them. As only houses built or substantially renovated after June 1999 are likely to have been impacted by the current regulations, there is a need to increase the scope of the regulations to include not only new installations, but also the replacement of existing heated water units if the goal of universal protection is to be achieved. Copyright © 2010 Elsevier Ltd and ISBI. All rights reserved.

  7. Getting Down to Business: Plumbing Business, Module 35. [Student Guide]. Entrepreneurship Training Components.

    ERIC Educational Resources Information Center

    Sanderson, Barbara

    This module on owning and operating a plumbing business is one of 36 in a series on entrepreneurship. The introduction tells the student what topics will be covered and suggests other modules to read in related occupations. Each unit includes student goals, a case study, and a discussion of the unit subject matter. Learning activities are divided…

  8. THE SCHOOL PLANT GUIDE FOR PLANNING SCHOOL PLANTS OF PENNSYLVANIA. ARCHITECTURAL DESIGN REQUIREMENTS AND GENERAL, ELECTRIC, HEATING AND VENTILATING, AND PLUMBING STANDARDS.

    ERIC Educational Resources Information Center

    Pennsylvania State Dept. of Public Instruction, Harrisburg.

    A GUIDE COVERING ARCHITECTURAL DESIGN REQUIREMENTS, ELECTRIC, HEATING AND VENTILATING, AND PLUMBING STANDARDS AS APPROVED BY THE STATE BOARD OF EDUCATION IN 1966. THE FOLLOWING MINIMUM STANDARD FOR NEW BUILDING, ALTERATIONS, AND ADDITIONS ARE OUTLINED--(1) SPATIAL ENVIRONMENTAL FACTORS, SUCH AS CEILING HEIGHTS, INTERIOR SANITARY FACILITIES, ROOMS…

  9. Pseudomonas aeruginosa in premise plumbing of large buildings.

    PubMed

    Bédard, Emilie; Prévost, Michèle; Déziel, Eric

    2016-12-01

    Pseudomonas aeruginosa is an opportunistic bacterial pathogen that is widely occurring in the environment and is recognized for its capacity to form or join biofilms. The present review consolidates current knowledge on P. aeruginosa ecology and its implication in healthcare facilities premise plumbing. The adaptability of P. aeruginosa and its capacity to integrate the biofilm from the faucet and the drain highlight the role premise plumbing devices can play in promoting growth and persistence. A meta-analysis of P. aeruginosa prevalence in faucets (manual and electronic) and drains reveals the large variation in device positivity reported and suggest the high variability in the sampling approach and context as the main reason for this variation. The effects of the operating conditions that prevail within water distribution systems (disinfection, temperature, and hydraulic regime) on the persistence of P. aeruginosa are summarized. As a result from the review, recommendations for proactive control measures of water contamination by P. aeruginosa are presented. A better understanding of the ecology of P. aeruginosa and key influencing factors in premise plumbing are essential to identify culprit areas and implement effective control measures. © 2016 The Authors. MicrobiologyOpen published by John Wiley & Sons Ltd.

  10. Inhibition of Adherence of Mycobacterium avium to Plumbing Surface Biofilms of Methylobacterium spp.

    PubMed Central

    Ji, Pan; Pruden, Amy; Falkinham, Joseph O.

    2017-01-01

    Both Mycobacterium spp. and Methylobacterium spp. are opportunistic premise plumbing pathogens that are found on pipe surfaces in households. However, examination of data published in prior microbiological surveys indicates that Methylobacterium spp. and Mycobacterium spp. tend not to coexist in the same household plumbing biofilms. That evidence led us to test the hypothesis that Methylobacterium spp. in biofilms could inhibit the adherence of Mycobacterium avium. Measurements of adherence of M. avium cells to stainless steel coupons using both culture and PCR-based methods showed that the presence of Methylobacterium spp. biofilms substantially reduced M. avium adherence and vice versa. That inhibition of M. avium adherence was not reduced by UV-irradiation, cyanide/azide exposure, or autoclaving of the Methylobacterium spp. biofilms. Further, there was no evidence of the production of anti-mycobacterial compounds by biofilm-grown Methylobacterium spp. cells. The results add to understanding of the role of microbial interactions in biofilms as a driving force in the proliferation or inhibition of opportunistic pathogens in premise plumbing, and provide a potential new avenue by which M. avium exposures may be reduced for at-risk individuals. PMID:28906463

  11. Farm Water Supply and Sanitation--Pipe, Plumbing, Skills and Symbols. Student Materials. V.A. III. V-D-1, V-D-2.

    ERIC Educational Resources Information Center

    Texas A and M Univ., College Station. Vocational Instructional Services.

    Designed for use by individuals enrolled in vocational agricultural classes, these student materials deal with farm water supply, sanitation, and plumbing skills. Topics covered in the unit are maintaining the farm water supply; repairing faucets and valves, leaks in pipes and storage tanks, and water closets; clearing clogged drains and traps;…

  12. Architectural, Mechanical, Electrical, Plumbing, and Site Documents Associated with Sustainability Base, N232

    NASA Technical Reports Server (NTRS)

    Grymes, Rosalind A.; Martin, Rodney Alexander; Dianati, Soheila

    2016-01-01

    These files contain more precise and accurate representations of the architectural, mechanical, electrical, plumbing, and site information pertaining to Sustainability Base, aka Collaborative Support Facility, aka N232. These supersede the 'bid' drawings released in STI 8112 previously. They are useful for NASA researchers and collaborators in modeling the performance characteristics of the facility. Otherwise, they do not contain new data.

  13. KSC-03PD-2829

    NASA Technical Reports Server (NTRS)

    2003-01-01

    KENNEDY SPACE CENTER, FLA. Capt. Charles Plumb (USNR retired) begins his dramatic presentation of his six years as a prisoner of war in Vietnam. The block of light on the stage represented the size of the cell he was confined in. Plumb was keynote speaker for the kickoff of Spaceport Super Safety and Health Day at KSC, an annual event dedicated to reinforcing safe and healthful behaviors in the workforce.

  14. Fall Department Head Report--Reporting Booklet 2.0 to the Massachusetts Division of Occupational Education (Fiscal Year Ending June 30, 1975) for Plumbing.

    ERIC Educational Resources Information Center

    Management and Information System for Occupational Education, Winchester, MA.

    The reporting booklet is required for the Census Data System (CDS) of the Management Information System for Occupational Education (MISOE); it contains the reporting forms which collect data that describe program structure and job-entry skill outcomes expected of program completors in the individual occupational education area of plumbing.…

  15. Epidemiology and Ecology of Opportunistic Premise Plumbing Pathogens: Legionella pneumophila, Mycobacterium avium, and Pseudomonas aeruginosa

    PubMed Central

    Hilborn, Elizabeth D.; Arduino, Matthew J.; Pruden, Amy; Edwards, Marc A.

    2015-01-01

    Background Legionella pneumophila, Mycobacterium avium, and Pseudomonas aeruginosa are opportunistic premise plumbing pathogens (OPPPs) that persist and grow in household plumbing, habitats they share with humans. Infections caused by these OPPPs involve individuals with preexisting risk factors and frequently require hospitalization. Objectives The objectives of this report are to alert professionals of the impact of OPPPs, the fact that 30% of the population may be exposed to OPPPs, and the need to develop means to reduce OPPP exposure. We herein present a review of the epidemiology and ecology of these three bacterial OPPPs, specifically to identify common and unique features. Methods A Water Research Foundation–sponsored workshop gathered experts from across the United States to review the characteristics of OPPPs, identify problems, and develop a list of research priorities to address critical knowledge gaps with respect to increasing OPPP-associated disease. Discussion OPPPs share the common characteristics of disinfectant resistance and growth in biofilms in water distribution systems or premise plumbing. Thus, they share a number of habitats with humans (e.g., showers) that can lead to exposure and infection. The frequency of OPPP-infected individuals is rising and will likely continue to rise as the number of at-risk individuals is increasing. Improved reporting of OPPP disease and increased understanding of the genetic, physiologic, and structural characteristics governing the persistence and growth of OPPPs in drinking water distribution systems and premise plumbing is needed. Conclusions Because broadly effective community-level engineering interventions for the control of OPPPs have yet to be identified, and because the number of at-risk individuals will continue to rise, it is likely that OPPP-related infections will continue to increase. However, it is possible that individuals can take measures (e.g., raise hot water heater temperatures and filter water) to reduce home exposures. Citation Falkinham JO III, Hilborn ED, Arduino MJ, Pruden A, Edwards MA. 2015. Epidemiology and ecology of opportunistic premise plumbing pathogens: Legionella pneumophila, Mycobacterium avium, and Pseudomonas aeruginosa. Environ Health Perspect 123:749–758; http://dx.doi.org/10.1289/ehp.1408692 PMID:25793551

  16. Laboratory Modelling of Volcano Plumbing Systems: a review

    NASA Astrophysics Data System (ADS)

    Galland, Olivier; Holohan, Eoghan P.; van Wyk de Vries, Benjamin; Burchardt, Steffi

    2015-04-01

    Earth scientists have, since the XIX century, tried to replicate or model geological processes in controlled laboratory experiments. In particular, laboratory modelling has been used study the development of volcanic plumbing systems, which sets the stage for volcanic eruptions. Volcanic plumbing systems involve complex processes that act at length scales of microns to thousands of kilometres and at time scales from milliseconds to billions of years, and laboratory models appear very suitable to address them. This contribution reviews laboratory models dedicated to study the dynamics of volcano plumbing systems (Galland et al., Accepted). The foundation of laboratory models is the choice of relevant model materials, both for rock and magma. We outline a broad range of suitable model materials used in the literature. These materials exhibit very diverse rheological behaviours, so their careful choice is a crucial first step for the proper experiment design. The second step is model scaling, which successively calls upon: (1) the principle of dimensional analysis, and (2) the principle of similarity. The dimensional analysis aims to identify the dimensionless physical parameters that govern the underlying processes. The principle of similarity states that "a laboratory model is equivalent to his geological analogue if the dimensionless parameters identified in the dimensional analysis are identical, even if the values of the governing dimensional parameters differ greatly" (Barenblatt, 2003). The application of these two steps ensures a solid understanding and geological relevance of the laboratory models. In addition, this procedure shows that laboratory models are not designed to exactly mimic a given geological system, but to understand underlying generic processes, either individually or in combination, and to identify or demonstrate physical laws that govern these processes. From this perspective, we review the numerous applications of laboratory models to understand the distinct key features of volcanic plumbing systems: dykes, cone sheets, sills, laccoliths, caldera-related structures, ground deformation, magma/fault interactions, and explosive vents. Barenblatt, G.I., 2003. Scaling. Cambridge University Press, Cambridge. Galland, O., Holohan, E.P., van Wyk de Vries, B., Burchardt, S., Accepted. Laboratory modelling of volcanic plumbing systems: A review, in: Breitkreuz, C., Rocchi, S. (Eds.), Laccoliths, sills and dykes: Physical geology of shallow level magmatic systems. Springer.

  17. Impact of Water Chemistry, Pipe Material and Stagnation on the Building Plumbing Microbiome.

    PubMed

    Ji, Pan; Parks, Jeffrey; Edwards, Marc A; Pruden, Amy

    2015-01-01

    A unique microbiome establishes in the portion of the potable water distribution system within homes and other buildings (i.e., building plumbing). To examine its composition and the factors that shape it, standardized cold water plumbing rigs were deployed at the treatment plant and in the distribution system of five water utilities across the U.S. Three pipe materials (copper with lead solder, CPVC with brass fittings or copper/lead combined pipe) were compared, with 8 hour flush cycles of 10 minutes to simulate typical daily use patterns. High throughput Illumina sequencing of 16S rRNA gene amplicons was employed to profile and compare the resident bulk water bacteria and archaea. The utility, location of the pipe rig, pipe material and stagnation all had a significant influence on the plumbing microbiome composition, but the utility source water and treatment practices were dominant factors. Examination of 21 water chemistry parameters suggested that the total chlorine concentration, pH, P, SO42- and Mg were associated with the most of the variation in bulk water microbiome composition. Disinfectant type exerted a notably low-magnitude impact on microbiome composition. At two utilities using the same source water, slight differences in treatment approaches were associated with differences in rare taxa in samples. For genera containing opportunistic pathogens, Utility C samples (highest pH of 9-10) had the highest frequency of detection for Legionella spp. and lowest relative abundance of Mycobacterium spp. Data were examined across utilities to identify a true universal core, special core, and peripheral organisms to deepen insight into the physical and chemical factors that shape the building plumbing microbiome.

  18. Impact of Water Chemistry, Pipe Material and Stagnation on the Building Plumbing Microbiome

    PubMed Central

    Ji, Pan; Parks, Jeffrey; Edwards, Marc A.; Pruden, Amy

    2015-01-01

    A unique microbiome establishes in the portion of the potable water distribution system within homes and other buildings (i.e., building plumbing). To examine its composition and the factors that shape it, standardized cold water plumbing rigs were deployed at the treatment plant and in the distribution system of five water utilities across the U.S. Three pipe materials (copper with lead solder, CPVC with brass fittings or copper/lead combined pipe) were compared, with 8 hour flush cycles of 10 minutes to simulate typical daily use patterns. High throughput Illumina sequencing of 16S rRNA gene amplicons was employed to profile and compare the resident bulk water bacteria and archaea. The utility, location of the pipe rig, pipe material and stagnation all had a significant influence on the plumbing microbiome composition, but the utility source water and treatment practices were dominant factors. Examination of 21 water chemistry parameters suggested that the total chlorine concentration, pH, P, SO4 2- and Mg were associated with the most of the variation in bulk water microbiome composition. Disinfectant type exerted a notably low-magnitude impact on microbiome composition. At two utilities using the same source water, slight differences in treatment approaches were associated with differences in rare taxa in samples. For genera containing opportunistic pathogens, Utility C samples (highest pH of 9–10) had the highest frequency of detection for Legionella spp. and lowest relative abundance of Mycobacterium spp. Data were examined across utilities to identify a true universal core, special core, and peripheral organisms to deepen insight into the physical and chemical factors that shape the building plumbing microbiome. PMID:26495985

  19. Constraints of texture and composition of clinopyroxene phenocrysts of Holocene volcanic rocks on a magmatic plumbing system beneath Tengchong, SW China

    NASA Astrophysics Data System (ADS)

    Hu, Jun-Hao; Song, Xie-Yan; He, Hai-Long; Zheng, Wen-Qin; Yu, Song-Yue; Chen, Lie-Meng; Lai, Chun-Kit

    2018-04-01

    Understanding processes of magma replenishment in a magma plumbing system is essential to predict eruption potential of a dormant volcano. In this study, we present new petrologic and thermobarometric data for youngest lava flows from the Holocene Heikongshan volcano in the Tengchong area, SW China. Clinopyroxene phenocrysts from the trachytic lava flows display various textural/compositional zoning styles (i.e., normal, reverse and oscillatory). Such zoning patterns are indicative of an open magmatic plumbing system with multiphase magma replenishment and mixing, which were likely a key drive of the volcanic eruptions. Thermobarometric calculations of these zoned clinopyroxene phenocrysts yield crystallization pressures of 3.8-7.1 kbar (peak at 4.5-7.0 kbar), corresponding to a magma chamber at depths of 14-21 km. The calculated depths are consistent with the large low-resistivity body at 12-30 km beneath the Heikongshan volcano, implying that the magmatic plumbing system may still be active. Recent earthquakes in the Tengchong area suggest that the regional strike-slip faulting are still active, and may trigger future volcanic eruptions if the magma chamber(s) beneath the Tengchong volcanic field is disturbed, in spite of the volcanic quiescence since 1609 CE.

  20. Deep crustal melt plumbing of Bárðarbunga volcano, Iceland

    NASA Astrophysics Data System (ADS)

    Hudson, T. S.; White, R. S.; Greenfield, T.; Ágústsdóttir, T.; Brisbourne, A.; Green, R. G.

    2017-09-01

    Understanding magmatic plumbing within the Earth's crust is important for understanding volcanic systems and improving eruption forecasting. We discuss magma plumbing under Bárðarbunga volcano, Iceland, over a 4 year period encompassing the largest Icelandic eruption in 230 years. Microseismicity extends through the usually ductile region of the Earth's crust, from 7 to 22 km depth in a subvertical column. Moment tensor solutions for an example earthquake exhibits opening tensile crack behavior. This is consistent with the deep (>7 km) seismicity being caused by the movement of melt in the normally aseismic crust. The seismically inferred melt path from the mantle source is offset laterally from the center of the Bárðarbunga caldera by 12 km, rather than lying directly beneath it. It is likely that an aseismic melt feed also exists directly beneath the caldera and is aseismic due to elevated temperatures and pervasive partial melt under the caldera.

  1. Re-plumbing in a Mediterranean sponge.

    PubMed

    Mendola, D; van den Boogaart, J G M; van Leeuwen, J L; Wijffels, R H

    2007-12-22

    Observations are reported for Dysidea avara sponges where once functioning oscula (outlets) are converted through internal re-plumbing into functioning oversized ostia (OSO; inlets). Flow tank studies employed high-speed photography and particle tracking of laser-illuminated 0.5-6.0 microm diameter glass beads to trace particles streaming into OSO. A fluorescein dye/glass bead uptake experiment showed that an oversized ostium was connected through internal structures to the lone osculum. Beginning 30 s after uptake and continuing over a 20 min period, dye streamed from the osculum, but no beads emerged. Scanning electron microscopy revealed that beads were deposited only on the inhalant side of particle filtering choanocyte chambers and not on the exhalant side, suggesting that internal re-plumbing had occurred. Functioning OSO were also found on freshly collected specimens in the field, making it highly unlikely that formation of OSO was only an artefact of sponges being held in a laboratory tank.

  2. Environmental Lead Pollution in an Urban Soft-water Area

    PubMed Central

    Beattie, A. D.; Moore, M. R.; Devenay, W. T.; Miller, A. R.; Goldberg, A.

    1972-01-01

    An investigation has been reported on the clinical and metabolic effects of lead acquired by soft domestic water from lead plumbing systems in 23 Glasgow households. The lead content of water from cold taps was up to 18 times the upper acceptable limit and was proportional to the amount of lead in the plumbing system. The blood lead of 71 inhabitants of these houses showed a significant positive correlation with water lead content. Delta-aminolaevulic acid dehydrase activity, an extremely sensitive indicator of lead exposure, showed a significant negative correlation with water-lead content. Atmospheric lead was within acceptable limits in all but one house and no significant correlation could be found with biochemical measurements. A small number of clinical abnormalities were found but could not be directly attributed to lead toxicity. The results of the study underline the possible danger to health of lead plumbing systems in soft-water regions. PMID:5031207

  3. Methylobacterium spp. as an indicator for the presence or absence of Mycobacterium spp.

    PubMed

    Falkinham, Joseph O; Williams, Myra D; Kwait, Rebecca; Lande, Leah

    2016-06-01

    A published survey of bacteria in showerhead biofilm samples revealed that Methylobacterium spp. and Mycobacterium spp. seldom coexisted in biofilms. To confirm that information, biofilm samples were collected from household plumbing of Mycobacterium avium patients and Methylobacterium spp. and M. avium numbers were measured by direct colony counts. The results demonstrated that if Methylobacterium spp. were present, Mycobacterium spp. were absent, and the opposite. The data demonstrate that microbial populations in biofilms can influence the presence or absence of opportunistic premise plumbing pathogens and, thereby, increase the range of strategies to reduce exposure to waterborne pathogens. Finally, by assessing for the visual presence of methylobacteria as pink pigmentation on showers and shower curtains, homeowners and managers of hospitals and other buildings can quickly determine whether a premise plumbing biofilm sample has mycobacteria with a high degree of assurance. Copyright © 2016 Asian African Society for Mycobacteriology. Published by Elsevier Ltd. All rights reserved.

  4. LiDAR observations of an Earth magmatic plumbing system as an analog for Venus and Mars distributed volcanism

    NASA Astrophysics Data System (ADS)

    Richardson, Jacob; Connor, Charles; Malservisi, Rocco; Bleacher, Jacob; Connor, Laura

    2014-05-01

    Clusters of tens to thousands of small volcanoes (diameters generally <30 km) are common features on the surface of Mars, Venus, and the Earth. These clusters may be described as distributed-style volcanism. Better characterizing the magmatic plumbing system of these clusters can constrain magma ascent processes as well as the regional magma production budget and heat flux beneath each cluster. Unfortunately, directly observing the plumbing systems of volcano clusters on Mars and Venus eludes our current geologic abilities. Because erosion exposes such systems at the Earth's surface, a better understanding of magmatic processes and migration can be achieved via field analysis. The terrestrial plumbing system of an eroded volcanic field may be a valuable planetary analog for Venus and Mars clusters. The magmatic plumbing system of a Pliocene-aged monogenetic volcanic field, emplaced at 0.8 km depth, is currently exposed as a sill and dike swarm in the San Rafael Desert of Central Utah, USA. The mafic bodies in this region intruded into Mesozoic sedimentary units and now make up the most erosion resistant units as sills, dikes, and plug-like conduits. Light Detection and Ranging (LiDAR) can identify volcanic units (sills, dikes, and conduits) at high resolution, both geomorphologically and with near infrared return intensity values. Two Terrestrial LiDAR Surveys and an Airborne LiDAR Survey have been carried out over the San Rafael volcanic swarm, producing a three dimensional point cloud over approximately 36 sq. km. From the point clouds of these surveys, 1-meter DEMs are produced and volcanic intrusions have been mapped. Here we present reconstructions of the volcanic instrusions of the San Rafael Swarm. We create this reconstruction by extrapolating mapped intrustions from the LiDAR surveys into a 3D space around the current surface. We compare the estimated intrusive volume to the estimated conduit density and estimates of extrusive volume at volcano clusters of similar density. The extrapolated reconstruction and conduit mapping provide a first-order estimate of the final intrustive/extrusive volume ratio for the now eroded volcanic field. Earth, Venus and Mars clusters are compared using Kernel Density Estimation (KDE) , which objectively compares cluster area, complexity, and vent density per sq. km. We show that Martian clusters are less dense than Venus clusters, which in turn are less dense than those on Earth. KDE and previous models of intrusive morphology for Mars and Venus are here used to calibrate the San Rafael plumbing system model to clusters on the two planets. The results from the calibrated Mars and Venus plumbing system models can be compared to previous estimates of magma budget and intrusive/extrusive ratios on Venus and Mars.

  5. The cleaning method selected for new PEX pipe installation can affect short-term drinking water quality.

    PubMed

    Kelley, Keven M; Stenson, Alexandra C; Cooley, Racheal; Dey, Rajarashi; Whelton, Andrew J

    2015-12-01

    The influence of four different cleaning methods used for newly installed polyethylene (PEX) pipes on chemical and odor quality was determined. Bench-scale testing of two PEX (type b) pipe brands showed that the California Plumbing Code PEX installation method does not maximize total organic carbon (TOC) removal. TOC concentration and threshold odor number values significantly varied between two pipe brands. Different cleaning methods impacted carbon release, odor, as well the level of drinking water odorant ethyl tert-butyl ether. Both pipes caused odor values up to eight times greater than the US federal drinking water odor limit. Unique to this project was that organic chemicals released by PEX pipe were affected by pipe brand, fill/empty cycle frequency, and the pipe cleaning method selected by the installer.

  6. Environmental Assessment for Replace Family Housing Phase IV at Malmstrom Air Force Base, Montana

    DTIC Science & Technology

    2003-08-15

    effects of hard water and corrosion, resulting in severe constriction and pipe leakage, and plumbing fixtures are worn and discolored and require... piping and plumbing fixtures, electrical wiring and lighting fixtures, cabinets, and finish work. All of the room layouts would remain the same since...Falls. The USFWS has classified the Missouri River as a Wild and Scenic River from the confluence with the Teton River, which is 50 miles northeast and

  7. [Identification of Systemic Contaminations with Legionella Spec. in Drinking Water Plumbing Systems: Sampling Strategies and Corresponding Parameters].

    PubMed

    Völker, S; Schreiber, C; Müller, H; Zacharias, N; Kistemann, T

    2017-05-01

    After the amendment of the Drinking Water Ordinance in 2011, the requirements for the hygienic-microbiological monitoring of drinking water installations have increased significantly. In the BMBF-funded project "Biofilm Management" (2010-2014), we examined the extent to which established sampling strategies in practice can uncover drinking water plumbing systems systemically colonized with Legionella. Moreover, we investigated additional parameters that might be suitable for detecting systemic contaminations. We subjected the drinking water plumbing systems of 8 buildings with known microbial contamination (Legionella) to an intensive hygienic-microbiological sampling with high spatial and temporal resolution. A total of 626 drinking hot water samples were analyzed with classical culture-based methods. In addition, comprehensive hygienic observations were conducted in each building and qualitative interviews with operators and users were applied. Collected tap-specific parameters were quantitatively analyzed by means of sensitivity and accuracy calculations. The systemic presence of Legionella in drinking water plumbing systems has a high spatial and temporal variability. Established sampling strategies were only partially suitable to detect long-term Legionella contaminations in practice. In particular, the sampling of hot water at the calorifier and circulation re-entrance showed little significance in terms of contamination events. To detect the systemic presence of Legionella,the parameters stagnation (qualitatively assessed) and temperature (compliance with the 5K-rule) showed better results. © Georg Thieme Verlag KG Stuttgart · New York.

  8. Virtual design and construction of plumbing systems

    NASA Astrophysics Data System (ADS)

    Filho, João Bosco P. Dantas; Angelim, Bruno Maciel; Guedes, Joana Pimentel; de Castro, Marcelo Augusto Farias; Neto, José de Paula Barros

    2016-12-01

    Traditionally, the design coordination process is carried out by overlaying and comparing 2D drawings made by different project participants. Detecting information errors from a composite drawing is especially challenging and error prone. This procedure usually leaves many design errors undetected until construction begins, and typically lead to rework. Correcting conflict issues, which were not identified during design and coordination phase, reduces the overall productivity for everyone involved in the construction process. The identification of construction issues in the field generate Request for Information (RFIs) that is one of delays causes. The application of Virtual Design and Construction (VDC) tools to the coordination processes can bring significant value to architecture, structure, and mechanical, electrical, and plumbing (MEP) designs in terms of a reduced number of errors undetected and requests for information. This paper is focused on evaluating requests for information (RFI) associated with water/sanitary facilities of a BIM model. Thus, it is expected to add improvements of water/sanitary facility designs, as well as to assist the virtual construction team to notice and identify design problems. This is an exploratory and descriptive research. A qualitative methodology is used. This study adopts RFI's classification in six analyzed categories: correction, omission, validation of information, modification, divergence of information and verification. The results demonstrate VDC's contribution improving the plumbing system designs. Recommendations are suggested to identify and avoid these RFI types in plumbing system design process or during virtual construction.

  9. Magma plumbing for the 2014-2015 Holuhraun eruption, Iceland

    NASA Astrophysics Data System (ADS)

    Geiger, Harri; Mattsson, Tobias; Deegan, Frances M.; Troll, Valentin R.; Burchardt, Steffi; Gudmundsson, Ólafur; Tryggvason, Ari; Krumbholz, Michael; Harris, Chris

    2016-08-01

    The 2014-2015 Holuhraun eruption on Iceland was located within the Askja fissure swarm but was accompanied by caldera subsidence in the Bárðarbunga central volcano 45 km to the southwest. Geophysical monitoring of the eruption identified a seismic swarm that migrated from Bárðarbunga to the Holuhraun eruption site over the course of two weeks. In order to better understand this lateral connection between Bárðarbunga and Holuhraun, we present mineral textures and compositions, mineral-melt-equilibrium calculations, whole rock and trace element data, and oxygen isotope ratios for selected Holuhraun samples. The Holuhraun lavas are compositionally similar to recorded historical eruptions from the Bárðarbunga volcanic system but are distinct from the historical eruption products of the nearby Askja system. Thermobarometry calculations indicate a polybaric magma plumbing system for the Holuhraun eruption, wherein clinopyroxene and plagioclase crystallized at average depths of ˜17 km and ˜5 km, respectively. Crystal resorption textures and oxygen isotope variations imply that this multilevel plumbing system facilitated magma mixing and assimilation of low-δ18O Icelandic crust prior to eruption. In conjunction with the existing geophysical evidence for lateral migration, our results support a model of initial vertical magma ascent within the Bárðarbunga plumbing system followed by lateral transport of aggregated magma batches within the upper crust to the Holuhraun eruption site.

  10. Derivative plumbing: redesigning washrooms, bodies, and trans affects in ds+r's Brasserie.

    PubMed

    Crawford, Lucas Cassidy

    2014-01-01

    diller scofidio + renfro's Brasserie restaurant sets the scene for this article's overarching question: what are the stakes of absorbing "the washroom" into our affective habits as trans people? This article uses architectural theory to show that some hygienic models of transgender-such as "original plumbing"-are less about explaining our genders to ourselves and more about (1) communicating our "fuckability" to (presumably non-trans) others and (2) codifying subtle and often problematic beliefs about the relationship between architecture and the body.

  11. 10. Photographic copy of engineering drawing showing the plumbing layout ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    10. Photographic copy of engineering drawing showing the plumbing layout of Test Stand 'C' Cv Cell, vacuum line, and scrubber-condenser as erected in 1977-78. JPL drawing by VTN Consolidated, Inc. Engineers, Architects, Planners, 2301 Campus Drive, Irvine, California 92664: 'JPL-ETS E-18 (C-Stand Modifications) Flow Diagram,' sheet M-2 (JPL sheet number E18/41-0), September 1, 1977. - Jet Propulsion Laboratory Edwards Facility, Test Stand C, Edwards Air Force Base, Boron, Kern County, CA

  12. Linking magma transport structures at Kīlauea volcano

    USGS Publications Warehouse

    Wech, Aaron G.; Thelen, Weston A.

    2015-01-01

    Identifying magma pathways is important for understanding and interpreting volcanic signals. At Kīlauea volcano, seismicity illuminates subsurface plumbing, but the broad spectrum of seismic phenomena hampers event identification. Discrete, long-period events (LPs) dominate the shallow (5-10 km) plumbing, and deep (40+ km) tremor has been observed offshore. However, our inability to routinely identify these events limits their utility in tracking ascending magma. Using envelope cross-correlation, we systematically catalog non-earthquake seismicity between 2008-2014. We find the LPs and deep tremor are spatially distinct, separated by the 15-25 km deep, horizontal mantle fault zone (MFZ). Our search corroborates previous observations, but we find broader-band (0.5-20 Hz) tremor comprising collocated earthquakes and reinterpret the deep tremor as earthquake swarms in a volume surrounding and responding to magma intruding from the mantle plume beneath the MFZ. We propose the overlying MFZ promotes lateral magma transport, linking this deep intrusion with Kīlauea’s shallow magma plumbing.

  13. Effectiveness of Devices to Monitor Biofouling and Metals Deposition on Plumbing Materials Exposed to a Full-Scale Drinking Water Distribution System

    PubMed Central

    Garbin, Scott; Wylie, Jason; Krishna, K. C. Bal

    2017-01-01

    A Modified Robbins Device (MRD) was installed in a full-scale water distribution system to investigate biofouling and metal depositions on concrete, high-density polyethylene (HDPE) and stainless steel surfaces. Bulk water monitoring and a KIWA monitor (with glass media) were used to offline monitor biofilm development on pipe wall surfaces. Results indicated that adenosine triphosphate (ATP) and metal concentrations on coupons increased with time. However, bacterial diversities decreased. There was a positive correlation between increase of ATP and metal deposition on pipe surfaces of stainless steel and HDPE and no correlation was observed on concrete and glass surfaces. The shared bacterial diversity between bulk water and MRD was less than 20% and the diversity shared between the MRD and KIWA monitor was only 10%. The bacterial diversity on biofilm of plumbing material of MRD however, did not show a significant difference suggesting a lack of influence from plumbing material during early stage of biofilm development. PMID:28060947

  14. From initiation to termination: a petrostratigraphic tour of the Ethiopian Low-Ti Flood Basalt Province

    NASA Astrophysics Data System (ADS)

    Krans, S. R.; Rooney, T. O.; Kappelman, J.; Yirgu, G.; Ayalew, D.

    2018-05-01

    Continental flood basalts (CFBs), thought to preserve the magmatic record of an impinging mantle plume head, offer spatial and temporal insights into melt generation processes in large igneous provinces (LIPs). Despite the utility of CFBs in probing mantle plume composition, these basalts typically erupt fractionated compositions, suggestive of significant residence time in the continental lithosphere. The location and duration of residence within the lithosphere provide additional insights into the flux of plume-related magmas. The NW Ethiopian plateau offers a well-preserved stratigraphic sequence from flood basalt initiation to termination, and is thus an important target for study of CFBs. This study examines modal observations within a stratigraphic framework and places these observations within the context of the magmatic evolution of the Ethiopian CFB province. Data demonstrate multiple pulses of magma recharge punctuated by brief shut-down events, with initial flows fed by magmas that experienced deeper fractionation (lower crust). Broad changes in modal mineralogy and flow cyclicity are consistent with fluctuating changes in magmatic flux through a complex plumbing system, indicating pulsed magma flux and an overall shallowing of the magmatic plumbing system over time. The composition of plagioclase megacrysts suggests a constant replenishing of new primitive magma recharging the shallow plumbing system during the main phase of volcanism, reaching an apex prior to flood basalt termination. The petrostratigraphic data sets presented in this paper provide new insight into the evolution of a magma plumbing system in a CFB province.

  15. Supra-acetabular line is better than supra-iliac line for coronal balance referencing-a study of perioperative whole spine X-rays in degenerative lumbar scoliosis and ankylosing spondylitis patients.

    PubMed

    Hey, Hwee Weng Dennis; Kim, Cheung-Kue; Lee, Won-Gyu; Juh, Hyung-Suk; Kim, Ki-Tack

    2017-12-01

    The aim of spinal deformity correction is to restore the spine's functional alignment by balancing it in both the sagittal and coronal planes. Regardless of posture, the ideal coronal profile is straight, and therefore readily assessable. This study compares two radiological methods to determine which better predicts postoperative standing coronal balance. We conducted a single-center, radiographic comparative study between 2011 and 2015. A total of 199 patients with a mean age of 55.1 years were studied. Ninety patients with degenerative lumbar scoliosis (DLS) and 109 ankylosing spondylitis (AS) were treated with posterior surgery during this period. Baseline clinical and radiographic parameters (sagittal and coronal) were recorded. Comparison was performed between the new supra-acetabular line (central sacral vertical line [CSVL1]) and conventional supra-iliac line (CSVL2) perpendicular methods of coronal balance assessment. These methods were also compared with the gold standard standing C7 plumb line. Each patient underwent standardized operative procedures and had perioperative spine X-rays obtained for assessment of spinal balance. Adjusted multivariate analysis was used to determine predictors of coronal balance. Significant differences in baseline characteristics (age, gender, and radiographic parameters) were found between patients with DLS and AS. CSVL1, CSVL2, and C7 plumb line differed in all the perioperative measurements. These three radiological methods showed a mean right coronal imbalance for both diagnoses in all pre-, intra-, and postoperative radiographs. The magnitude of imbalance was the greatest for CSVL2 followed by CSVL1 and subsequently the C7 plumb line. A larger discrepancy between CSVL and C7 plumb line measurements intraoperatively than those postoperatively suggests a postural effect on these parameters, which is greater for CSVL2. Multivariate analysis identified that in DLS, the preoperative C7 plumb line was predictive of its postoperative value. CSVL1, but not CSVL2, was predictive of the postoperative C7 plumb line in patients with AS. The supra-acetabular line (CSVL1) is better, although not ideal, as compared with the supra-iliac line (CSVL2) in determining coronal balance. Because CSVL1 still cannot be relied on with a high predictive value, it is imperative that future studies continue to identify better intraoperative markers for achieving coronal balance. Copyright © 2017 Elsevier Inc. All rights reserved.

  16. Shift in the Microbial Ecology of a Hospital Hot Water System following the Introduction of an On-Site Monochloramine Disinfection System

    PubMed Central

    Baron, Julianne L.; Vikram, Amit; Duda, Scott; Stout, Janet E.; Bibby, Kyle

    2014-01-01

    Drinking water distribution systems, including premise plumbing, contain a diverse microbiological community that may include opportunistic pathogens. On-site supplemental disinfection systems have been proposed as a control method for opportunistic pathogens in premise plumbing. The majority of on-site disinfection systems to date have been installed in hospitals due to the high concentration of opportunistic pathogen susceptible occupants. The installation of on-site supplemental disinfection systems in hospitals allows for evaluation of the impact of on-site disinfection systems on drinking water system microbial ecology prior to widespread application. This study evaluated the impact of supplemental monochloramine on the microbial ecology of a hospital’s hot water system. Samples were taken three months and immediately prior to monochloramine treatment and monthly for the first six months of treatment, and all samples were subjected to high throughput Illumina 16S rRNA region sequencing. The microbial community composition of monochloramine treated samples was dramatically different than the baseline months. There was an immediate shift towards decreased relative abundance of Betaproteobacteria, and increased relative abundance of Firmicutes, Alphaproteobacteria, Gammaproteobacteria, Cyanobacteria and Actinobacteria. Following treatment, microbial populations grouped by sampling location rather than sampling time. Over the course of treatment the relative abundance of certain genera containing opportunistic pathogens and genera containing denitrifying bacteria increased. The results demonstrate the driving influence of supplemental disinfection on premise plumbing microbial ecology and suggest the value of further investigation into the overall effects of premise plumbing disinfection strategies on microbial ecology and not solely specific target microorganisms. PMID:25033448

  17. Shift in the microbial ecology of a hospital hot water system following the introduction of an on-site monochloramine disinfection system.

    PubMed

    Baron, Julianne L; Vikram, Amit; Duda, Scott; Stout, Janet E; Bibby, Kyle

    2014-01-01

    Drinking water distribution systems, including premise plumbing, contain a diverse microbiological community that may include opportunistic pathogens. On-site supplemental disinfection systems have been proposed as a control method for opportunistic pathogens in premise plumbing. The majority of on-site disinfection systems to date have been installed in hospitals due to the high concentration of opportunistic pathogen susceptible occupants. The installation of on-site supplemental disinfection systems in hospitals allows for evaluation of the impact of on-site disinfection systems on drinking water system microbial ecology prior to widespread application. This study evaluated the impact of supplemental monochloramine on the microbial ecology of a hospital's hot water system. Samples were taken three months and immediately prior to monochloramine treatment and monthly for the first six months of treatment, and all samples were subjected to high throughput Illumina 16S rRNA region sequencing. The microbial community composition of monochloramine treated samples was dramatically different than the baseline months. There was an immediate shift towards decreased relative abundance of Betaproteobacteria, and increased relative abundance of Firmicutes, Alphaproteobacteria, Gammaproteobacteria, Cyanobacteria and Actinobacteria. Following treatment, microbial populations grouped by sampling location rather than sampling time. Over the course of treatment the relative abundance of certain genera containing opportunistic pathogens and genera containing denitrifying bacteria increased. The results demonstrate the driving influence of supplemental disinfection on premise plumbing microbial ecology and suggest the value of further investigation into the overall effects of premise plumbing disinfection strategies on microbial ecology and not solely specific target microorganisms.

  18. An in-premise model for Legionella exposure during showering events.

    PubMed

    Schoen, Mary E; Ashbolt, Nicholas J

    2011-11-15

    An exposure model was constructed to predict the critical Legionella densities in an engineered water system that result in infection from inhalation of aerosols containing the pathogen while showering. The model predicted the Legionella densities in the shower air, water and in-premise plumbing biofilm that might result in a deposited dose of Legionella in the alveolar region of the lungs associated with infection for a routine showering event. Processes modeled included the detachment of biofilm-associated Legionella from the in-premise plumbing biofilm during a showering event, the partitioning of the pathogen from the shower water to the air, and the inhalation and deposition of particles in the lungs. The range of predicted critical Legionella densities in the air and water was compared to the available literature. The predictions were generally within the limited set of observations for air and water, with the exception of Legionella density within in-premise plumbing biofilms, for which there remains a lack of observations for comparison. Sensitivity analysis of the predicted results to possible changes in the uncertain input parameters identified the target deposited dose associated with infections, the pathogen air-water partitioning coefficient, and the quantity of detached biofilm from in-premise pluming surfaces as important parameters for additional data collection. In addition, the critical density of free-living protozoan hosts in the biofilm required to propagate the infectious Legionella was estimated. Together, this evidence can help to identify critical conditions that might lead to infection derived from pathogens within the biofilms of any plumbing system from which humans may be exposed to aerosols. Published by Elsevier Ltd.

  19. Shallow plumbing systems inferred from spatial analysis of pockmark arrays

    NASA Astrophysics Data System (ADS)

    Maia, A.; Cartwright, J. A.; Andersen, E.

    2016-12-01

    This study describes and analyses an extraordinary array of pockmarks at the modern seabed of the Lower Congo Basin (offshore Angola), in order to understand the fluid migration routes and shallow plumbing system of the area. The 3D seismic visualization of feeding conduits (pipes) allowed the identification of the source interval for the fluids expelled during pockmark formation. Spatial statistics are used to show the relationship between the underlying (polarised) polygonal fault (PPFs) patterns and seabed pockmarks distributions. Our results show PPFs control the linear arrangement of pockmarks and feeder pipes along fault strike, but faults do not act as conduits. Spatial statistics also revealed pockmark occurrence is not considered to be random, especially at short distances to nearest neighbours (<200m) where anti-clustering distributions suggest the presence of an exclusion zone around each pockmark in which no other pockmark will form. The results of this study are relevant for the understanding of shallow fluid plumbing systems in offshore settings, with implications on our current knowledge of overall fluid flow systems in hydrocarbon-rich continental margins.

  20. The influence of the chemical composition of drinking water on cuprosolvency by biofilm bacteria.

    PubMed

    Critchley, M M; Cromar, N J; McClure, N C; Fallowfield, H J

    2003-01-01

    This study investigated the influence of water chemistry on copper solvation (cuprosolvency) by pure culture biofilms of heterotrophic bacteria isolated from copper plumbing. Heterotrophic bacteria isolated from copper plumbing biofilms including Acidovorax delafieldii, Flavobacterium sp., Corynebacterium sp., Pseudomonas sp. and Stenotrophomonas maltophilia were used in laboratory coupon experiments to assess their potential for cuprosolvency. Sterile copper coupons were exposed to pure cultures of bacteria to allow biofilm formation and suspended in drinking waters with different chemical compositions. Sterile coupons not exposed to bacteria were used as controls. After 5 days of incubation, copper release and biofilm accumulation was quantified. The results demonstrated that cuprosolvency in the control experiments was influenced by water pH, total organic carbon (TOC) and conductivity. Cuprosolvency in the presence of biofilms correlated with the chemical composition of the water supplies particularly pH, Langeliers Index, chloride, alkalinity, TOC and soluble phosphate concentrations. The results suggest water quality may influence cuprosolvency by biofilms present within copper plumbing pipes. The potential for water chemistry to influence cuprosolvency by biofilms may contribute to the sporadic nature of copper corrosion problems in distribution systems.

  1. The relationship between forward head posture and temporomandibular disorders.

    PubMed

    Lee, W Y; Okeson, J P; Lindroth, J

    1995-01-01

    This study investigated the relationship between forward head posture and temporomandibular disorder symptoms. Thirty-three temporomandibular disorder patients with predominant complaints of masticatory muscle pain were compared with an age- and gender-matched control group. Head position was measured from photographs taken with a plumb line drawn from the ceiling to the lateral malleolus of the ankle and with a horizontal plane that was perpendicular to the plumb line and that passed through the spinous process of the seventh cervical vertebra. The distances from the plumb line to the ear, to the seventh vertebra, and to the shoulder were measured. Two angles were also measured: (1) ear-seventh cervical vertebra-horizontal plane and (2) eye-ear-seventh cervical vertebra. The only measurement that revealed a statistically significant difference was angle ear-seventh cervical vertebra-horizontal plane. This angle was smaller in the patients with temporomandibular disorders than in the control subjects. In other words, when evaluating the ear position with respect to the seventh cervical vertebra, the head was positioned more forward in the group with temporomandibular disorders than in the control group (P < .05).

  2. Earthquakes-Rattling the Earth's Plumbing System

    USGS Publications Warehouse

    Sneed, Michelle; Galloway, Devin L.; Cunningham, William L.

    2003-01-01

    Hydrogeologic responses to earthquakes have been known for decades, and have occurred both close to, and thousands of miles from earthquake epicenters. Water wells have become turbid, dry or begun flowing, discharge of springs and ground water to streams has increased and new springs have formed, and well and surface-water quality have become degraded as a result of earthquakes. Earthquakes affect our Earth’s intricate plumbing system—whether you live near the notoriously active San Andreas Fault in California, or far from active faults in Florida, an earthquake near or far can affect you and the water resources you depend on.

  3. Prevalence of Infection-Competent Serogroup 6 Legionella pneumophila within Premise Plumbing in Southeast Michigan

    PubMed Central

    Byrne, Brenda G.; McColm, Sarah; McElmurry, Shawn P.; Sobeck, Joanne; Sadler, Rick; Love, Nancy G.

    2018-01-01

    ABSTRACT Coinciding with major changes to its municipal water system, Flint, MI, endured Legionnaires’ disease outbreaks in 2014 and 2015. By sampling premise plumbing in Flint in the fall of 2016, we found that 12% of homes harbored legionellae, a frequency similar to that in residences in neighboring areas. To evaluate the genetic diversity of Legionella pneumophila in Southeast Michigan, we determined the sequence type (ST) and serogroup (SG) of the 18 residential isolates from Flint and Detroit, MI, and the 33 clinical isolates submitted by hospitals in three area counties in 2013 to 2016. Common to one environmental and four clinical samples were strains of L. pneumophila SG1 and ST1, the most prevalent ST worldwide. Among the Flint premise plumbing isolates, 14 of 16 strains were of ST367 and ST461, two closely related SG6 strain types isolated previously from patients and corresponding environmental samples. Each of the representative SG1 clinical strains and SG6 environmental isolates from Southeast Michigan infected and survived within macrophage cultures at least as well as a virulent laboratory strain, as judged by microscopy and by enumerating CFU. Likewise, 72 h after infection, the yield of viable-cell counts increased >100-fold for each of the representative SG1 clinical isolates, Flint premise plumbing SG6 ST367 and -461 isolates, and two Detroit residential isolates. We verified by immunostaining that SG1-specific antibody does not cross-react with the SG6 L. pneumophila environmental strains. Because the widely used urinary antigen diagnostic test does not readily detect non-SG1 L. pneumophila, Legionnaires’ disease caused by SG6 L. pneumophila is likely underreported worldwide. PMID:29437918

  4. Modeling lead concentration in drinking water of residential plumbing pipes and hot water tanks.

    PubMed

    Chowdhury, Shakhawat; Kabir, Fayzul; Mazumder, Mohammad Abu Jafar; Zahir, Md Hasan

    2018-09-01

    Drinking water is a potential source of exposure to lead (Pb), which can pose risk to humans. The regulatory agencies often monitor Pb in water treatment plants (WTP) and/or water distribution systems (WDS). However, people are exposed to tap water inside the house while water may stay in the plumbing premise for several hours prior to reaching the tap. Depending on stagnation period and plumbing premise, concentrations of Pb in tap water can be significantly higher than the WDS leading to higher intake of Pb than the values from WDS or WTP. In this study, concentrations of Pb and water quality parameters were investigated in WDS, plumbing pipe (PP) and hot water tanks (HWT) for 7months. The samples were collected and analyzed on bi-weekly basis for 7 times a day. Several linear, non-linear and neural network models were developed for predicting Pb in PP and HWT. The models were validated using the additional data, which were not used for model development. The concentrations of Pb in PP and HWT were 1-1.17 and 1-1.21 times the Pb in WDS respectively. Concentrations of Pb were higher in summer than winter. The models showed moderate to excellent performance (R 2 =0.85-0.99) in predicting Pb in PP and HWT. The correlation coefficients (r) with the validation data were in the ranges of 0.76-0.90 and 0.97-0.99 for PP and HWT respectively. The models can be used for predicting Pb in tap water, which can assist to better protect the humans. Copyright © 2018. Published by Elsevier B.V.

  5. Influence of copper ions on the viability and cytotoxicity of Pseudomonas aeruginosa under conditions relevant to drinking water environments.

    PubMed

    Dwidjosiswojo, Zenyta; Richard, Jessica; Moritz, Miriam M; Dopp, Elke; Flemming, Hans-Curt; Wingender, Jost

    2011-11-01

    Copper plumbing materials can be the source of copper ions in drinking water supplies. The aim of the current study was to investigate the influence of copper ions on the viability and cytotoxicity of the potential pathogen Pseudomonas aeruginosa that presents a health hazard when occurring in building plumbing systems. In batch experiments, exposure of P. aeruginosa (10(6)cells/mL) for 24h at 20°C to copper-containing drinking water from domestic plumbing systems resulted in a loss of culturability, while total cell numbers determined microscopically did not decrease. Addition of the chelator diethyldithiocarbamate (DDTC) to copper-containing water prevented the loss of culturability. When suspended in deionized water with added copper sulfate (10 μM), the culturability of P. aeruginosa decreased by more than 6 log units, while total cell counts, the concentration of cells with intact cytoplasmic membranes, determined with the LIVE/DEAD BacLight kit, and the number of cells with intact 16S ribosomal RNA, determined by fluorescent in situ hybridization, remained unchanged. When the chelator DDTC was added to copper-stressed bacteria, complete restoration of culturability was observed to occur within 14 d. Copper-stressed bacteria were not cytotoxic towards Chinese hamster ovary (CHO-9) cells, while untreated and resuscitated bacteria caused an almost complete decrease of the concentration of viable CHO-9 cells within 24 h. Thus, copper ions in concentrations relevant to drinking water in plumbing systems seem to induce a viable but non-culturable (VBNC) state in P. aeruginosa accompanied by a loss of culturability and cytotoxicity, and VBNC cells can regain both culturability and cytotoxicity, when copper stress is abolished. Copyright © 2011 Elsevier GmbH. All rights reserved.

  6. On the three dimensional structure of stratospheric material transport associated with various types of waves

    NASA Astrophysics Data System (ADS)

    Kinoshita, T.; Sato, K.

    2016-12-01

    The Transformed Eulerian-Mean (TEM) equations were derived by Andrews and McIntyre (1976, 1978) and have been widely used to examine wave-mean flow interaction in the meridional cross section. According to previous studies, the Brewer-Dobson circulation in the stratosphere is driven by planetary waves, baroclinic waves, and inertia-gravity waves, and that the meridional circulation from the summer hemisphere to the winter hemisphere in the mesosphere is mainly driven by gravity waves (e.g., Garcia and Boville 1994; Plumb and Semeniuk 2003; Watanabe et al. 2008; Okamoto et al. 2011). However, the TEM equations do not provide the three-dimensional view of the transport, so that the three dimensional TEM equations have been formulated (Hoskins et al. 1983, Trenberth 1986, Plumb 1985, 1986, Takaya and Nakamura 1997, 2001, Miyahara 2006, Kinoshita et al. 2010, Noda 2010, Kinoshita and Sato 2013a, b, and Noda 2014). On the other hand, the TEM equations cannot properly treat the lower boundary and unstable waves. The Mass-weighted Isentropic Mean (MIM) equations derived by Iwasaki (1989, 1990) are the equations that overcome those problems and the formulation of three-dimensional MIM equations have been studied. The present study applies the three-dimensional TEM and MIM equations to the ERA-Interim reanalysis data and examines the climatological character of three-dimensional structure of Stratospheric Brewer-Dobson circulation. Next, we will discuss how to treat the flow associated with spatial structure of stationary waves.

  7. Intra-cone plumbing system and eruptive dynamics of small-volume basaltic volcanoes: A case study in the Calatrava Volcanic Field

    NASA Astrophysics Data System (ADS)

    Carracedo-Sánchez, M.; Sarrionandia, F.; Ábalos, B.; Errandonea-Martin, J.; Gil Ibarguchi, J. I.

    2017-12-01

    The Manoteras volcano (Tortonian to Pleistocene, Calatrava Volcanic Field, Spain) is composed of a scoria and spatter cone surrounded by a field of pahoehoe lava. The volcanic cone is made essentially of vitreous lapilli-tuffs with intercalations of vitreous tuffs and spatter deposits, without any intercalations of lava flows. Erosion has uncovered an intra-cone plumbing system formed by coherent dykes and pyroclastic dykes (mixed-type dykes). This dyke swarm reflects processes of intrusion at the end of the eruption or even post-eruption. All the volcanic products are nephelinitic in composition. The main dyke is up to 3.4 m thick and has an exposed length of 1000 m. It is composed mostly of coherent nephelinite with some pyroclastic sections at its northern extremity. This dyke is regarded as a feeder dyke of the volcano, although the upper parts of the dike have been eroded, which prevents the observation of the characteristics and nature of the possible overlying vent(s). Mixed-type dykes could also have acted as small linear vents and indicate that the magma fragmentation level during final waning stages of the eruption was located inside the volcanic cone. The pyroclastic deposits that make up the volcanic cone at the current exposure level were probably developed during a major phase of violent Strombolian style that formed the scoria cone, followed by a Hawaiian phase that formed the summital intracrater spatter deposit. Three central-type vents have been identified: one at the highest point of the remnant volcanic cone (summital vent), from where the earlier explosive eruptions took place, and the other two at the fringe of the cone base, from where emissions were only effusive. The lava flows were emitted from these boccas through the scoria cone feeding the lava field. The results obtained, based on careful field observations, add substantial complexity to the proposed eruptive models for small-volume basaltic volcanoes as it appears evident that there may exist and evolution through time from central conduit settings to fissure eruptions. Moreover, it is shown that intracone plumbing systems can integrate coherent and clastic dykes of variable thicknesses, which, in some cases could represent feeder dykes. Table 2. Petrographic characteristics of the coherent rocks (dykes and lava flows) from the Manoteras volcano. See Fig. 2 supplementary.

  8. Plumbing Fixture for a Microfluidic Cartridge

    NASA Technical Reports Server (NTRS)

    Francis, Kevin

    2007-01-01

    A fixture has been devised for making the plumbing connections between a microfluidic device in a replaceable cartridge and an external fluidic system. The fixture includes a 0.25-in. (6.35-mm) thick steel plate, to which the cartridge is fastened by two 10-32 thumb screws. The plate holds one plumbing fitting for the inlet and one for the outlet of the microfluidic device. Each fitting includes a fused-silica tube of 0.006-in. (approx.0.15-mm) inside diameter within a fluorinated ethylene-propylene (FEP) tube of 0.0155-in. (approx.0.39-mm) inside diameter and 0.062- in. (approx.1.57-mm) outside diameter. The FEP tube is press-fit through the steel plate so that its exposed end is flush with the surface of the plate, and the silica tube protrudes 0.03 in. (approx.0.76 mm) from the plate/FEP-tube-end surface. The cartridge includes a glass cover plate that contains 0.06-mm-wide access ports. When the cartridge is fastened to the steel plate, the silica tubes become inserted through the access ports and into the body of the cartridge, while the ends of the FEP tubes become butted against the glass cover plate. An extremely tight seal is thereby made.

  9. Multi-technique approach to assess the effects of microbial biofilms involved in copper plumbing corrosion.

    PubMed

    Vargas, Ignacio T; Alsina, Marco A; Pavissich, Juan P; Jeria, Gustavo A; Pastén, Pablo A; Walczak, Magdalena; Pizarro, Gonzalo E

    2014-06-01

    Microbially influenced corrosion (MIC) is recognized as an unusual and severe type of corrosion that causes costly failures around the world. A microbial biofilm could enhance the copper release from copper plumbing into the water by forming a reactive interface. The biofilm increases the corrosion rate, the mobility of labile copper from its matrix and the detachment of particles enriched with copper under variable shear stress due to flow conditions. MIC is currently considered as a series of interdependent processes occurring at the metal-liquid interface. The presence of a biofilm results in the following effects: (a) the formation of localized microenvironments with distinct pH, dissolved oxygen concentrations, and redox conditions; (b) sorption and desorption of labile copper bonded to organic compounds under changing water chemistry conditions; (c) change in morphology by deposition of solid corrosion by-products; (d) diffusive transport of reactive chemical species from or towards the metal surface; and (e) detachment of scale particles under flow conditions. Using a multi-technique approach that combines pipe and coupon experiments this paper reviews the effects of microbial biofilms on the corrosion of copper plumbing systems, and proposes an integrated conceptual model for this phenomenon supported by new experimental data. Copyright © 2013 Elsevier B.V. All rights reserved.

  10. Non-Intrusive Pressure/Multipurpose Sensor and Method

    NASA Technical Reports Server (NTRS)

    Smith, William C. (Inventor)

    2001-01-01

    Method and apparatus are provided for determining pressure using a non-intrusive sensor that is easily attachable to the plumbing of a pressurized system. A bent mode implementation and a hoop mode implementation of the invention are disclosed. Each of these implementations is able to nonintrusively measure pressure while fluid is flowing. As well, each implementation may be used to measure mass flow rate simultaneously with pressure. An ultra low noise control system is provided for making pressure measurements during gas flow. The control system includes two tunable digital bandpass filters with center frequencies that are responsive to a clock frequency. The clock frequency is divided by a factor of N to produce a driving vibrational signal for resonating a metal sensor section.

  11. Case study: Fixture water use and drinking water quality in a new residential green building.

    PubMed

    Salehi, Maryam; Abouali, Mohammad; Wang, Mian; Zhou, Zhi; Nejadhashemi, Amir Pouyan; Mitchell, Jade; Caskey, Stephen; Whelton, Andrew J

    2018-03-01

    Residential plumbing is critical for the health and safety of populations worldwide. A case study was conducted to understand fixture water use, drinking water quality and their possible link, in a newly plumbed residential green building. Water use and water quality were monitored at four in-building locations from September 2015 through December 2015. Once the home was fully inhabited average water stagnation periods were shortest at the 2nd floor hot fixture (90 percentile of 0.6-1.2 h). The maximum water stagnation time was 72.0 h. Bacteria and organic carbon levels increased inside the plumbing system compared to the municipal tap water entering the building. A greater amount of bacteria was detected in hot water samples (6-74,002 gene copy number/mL) compared to cold water (2-597 gene copy number/mL). This suggested that hot water plumbing promoted greater microbial growth. The basement fixture brass needle valve may have caused maximum Zn (5.9 mg/L), Fe (4.1 mg/L), and Pb (23 μg/L) levels compared to other fixture water samples (Zn ≤ 2.1 mg/L, Fe ≤ 0.5 mg/L and Pb ≤ 8 μg/L). At the basement fixture, where the least amount of water use events occurred (cold: 60-105, hot: 21-69 event/month) compared to the other fixtures in the building (cold: 145-856, hot: 326-2230 event/month), greater organic carbon, bacteria, and heavy metal levels were detected. Different fixture use patterns resulted in disparate water quality within a single-family home. The greatest drinking water quality changes were detected at the least frequently used fixture. Copyright © 2017 Elsevier Ltd. All rights reserved.

  12. Magma plumbing in the Grímsvötn volcanic system, Iceland: an overview

    NASA Astrophysics Data System (ADS)

    Thordarson, T.

    2016-12-01

    The basaltic Grímsvötn volcanic system (GVS) consists of Grímsvötn central volcano (GCV) and an immature fissure swarm extending 70 km to the southwest from GCV. The GCV has the highest eruption frequency of all central volcanos in Iceland, or 7 events per 100 years. In contrast, the GVS fissure swarm has only featured two events in postglacial times, the 1783-4 Laki and the prehistoric Lambavatnsgígar fissure eruptions. These two events account for 25% of the total Holocene magma output from the GVS and 80% of the output in historic time (i.e. last 1100 years). Although GVS magma plumbing has been a topic of research for four decades, its general structure, extent and geometry is still deliberated. Is mantle-derived magma delivered straight up beneath the GCV to an upper crustal magma chamber and then vertically to eruptions at the GCV and laterally to eruption on the GVS fissure swarm? Or does the system feature two levels of crustal storage, one in the upper crust beneath GCV and another at mid-crustal depth? Or is the structure of the GVS plumbing more complex? The data that we have so far and is pertinent to GVS magma plumbing is summarised below: Geophysical measurements imply that shallowest magma storage beneath GCV is at 3-4 km. The Zr and Nb concentrations in the tephra from the 1998 and 2004 GCV plus Laki eruptions show that the parent magmas for each was produced by different degrees of partial melting of a similar mantle source. It also demonstrates transport to the surface via separate pathways and that neither magma can be derived by fractional crystallization from a Laki-like magma. Detailed petrological studies on the Laki tephra and lava indicate polybaric magma evolution within the mid-crust (at 6 to 15 km depth), with further evolution at shallower depths induced either by disequilibrium crystal growth during ascent of magma from the mid-crust storage or a brief residence at 3-6 km depths. The Laki magma contains significant abundances of polymineralic glomerocrysts, signifying that erupted magma interacted with preexisting crystal mushes. These data support the notion of a crustal plumbing system with multiple storage level involving polybaric magma evolution and are inconsistent with the idea that all of the magma erupted within the GVS is delivered from a single upper crustal magma chamber beneath GCV.

  13. Glenn Powell | NREL

    Science.gov Websites

    , bearings Construction, project supervision, steel, timber, plumbing, critical climate control Water and wastewater treatment, storage, pumping Purchasing, budgeting, planning Education Yacht 3 Marine Chief

  14. Improving adsorption cryocoolers by multi-stage compression and reducing void volume

    NASA Technical Reports Server (NTRS)

    Bard, S.

    1986-01-01

    It is shown that the performance of gas adsorption cryocoolers is greatly improved by using adsorbents with low void volume within and between individual adsorbent particles (reducing void volumes in plumbing lines), and by compressing the working fluid in more than one stage. Refrigerator specific power requirements and compressor volumetric efficiencies are obtained in terms of adsorbent and plumbing line void volumes and operating pressures for various charcoal adsorbents using an analytical model. Performance optimization curves for 117.5 and 80 K charcoal/nitrogen adsorption cryocoolers are given for both single stage and multistage compressor systems, and compressing the nitrogen in two stages is shown to lower the specific power requirements by 18 percent for the 117.5 K system.

  15. 24 CFR 3280.1 - Scope.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... MANUFACTURED HOME CONSTRUCTION AND SAFETY STANDARDS General § 3280.1 Scope. This standard covers all equipment and installations in the design, construction, transportation, fire safety, plumbing, heat-producing...

  16. 24 CFR 3280.1 - Scope.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... MANUFACTURED HOME CONSTRUCTION AND SAFETY STANDARDS General § 3280.1 Scope. This standard covers all equipment and installations in the design, construction, transportation, fire safety, plumbing, heat-producing...

  17. 24 CFR 3280.1 - Scope.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... MANUFACTURED HOME CONSTRUCTION AND SAFETY STANDARDS General § 3280.1 Scope. This standard covers all equipment and installations in the design, construction, transportation, fire safety, plumbing, heat-producing...

  18. 24 CFR 3280.1 - Scope.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... MANUFACTURED HOME CONSTRUCTION AND SAFETY STANDARDS General § 3280.1 Scope. This standard covers all equipment and installations in the design, construction, transportation, fire safety, plumbing, heat-producing...

  19. Technologies for Legionella Control

    EPA Science Inventory

    Presentation includes a review of new Office of Water document entitled "Technologies for Legionella Control in Premise Plumbing Systems", and discussion on ORD research projects involving Legionella and disinfection.

  20. 48 CFR 246.270-2 - Policy.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ...— (1) Fire protection; (2) Structural integrity; (3) Electrical systems; (4) Plumbing; (5) Water treatment; (6) Waste disposal; and (7) Telecommunications networks. (c) Existing host nation facilities...

  1. 48 CFR 246.270-2 - Policy.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ...— (1) Fire protection; (2) Structural integrity; (3) Electrical systems; (4) Plumbing; (5) Water treatment; (6) Waste disposal; and (7) Telecommunications networks. (c) Existing host nation facilities...

  2. 48 CFR 246.270-2 - Policy.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ...— (1) Fire protection; (2) Structural integrity; (3) Electrical systems; (4) Plumbing; (5) Water treatment; (6) Waste disposal; and (7) Telecommunications networks. (c) Existing host nation facilities...

  3. 48 CFR 246.270-2 - Policy.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ...— (1) Fire protection; (2) Structural integrity; (3) Electrical systems; (4) Plumbing; (5) Water treatment; (6) Waste disposal; and (7) Telecommunications networks. (c) Existing host nation facilities...

  4. Plugging Leaks.

    ERIC Educational Resources Information Center

    Fitzemeyer, Ted

    2000-01-01

    Explains how routine maintenance can help schools and universities avoid plumbing disasters. Common trouble spots and preventive techniques are discussed, as are tips for making repairs without disrupting school activities. (GR)

  5. A Guide for Recertification of Ground Based Pressure Vessels and Liquid Holding Tanks

    DTIC Science & Technology

    1987-12-15

    Boiler and Pressure Vessel Code , Section...Requirements 202 Calculate Vessel MAWP Using ASME Boiler and Pressure Vessel Code Section VUI, Division 1. 203 Assess Vessel MAWP Using ASME Boiler and Pressure Vessel Code Section...Engineers (ASME) Boiler and Pressure Vessel Code (B&PV) Section VIll, Division 1, or other applicable standard. This activity involves the

  6. Impact of water heater temperature setting and water use frequency on the building plumbing microbiome

    PubMed Central

    Ji, Pan; Rhoads, William J; Edwards, Marc A; Pruden, Amy

    2017-01-01

    Hot water plumbing is an important conduit of microbes into the indoor environment and can increase risk of opportunistic pathogens (for example, Legionella pneumophila). We examined the combined effects of water heater temperature (39, 42, 48, 51 and 58 °C), pipe orientation (upward/downward), and water use frequency (21, 3 and 1 flush per week) on the microbial composition at the tap using a pilot-scale pipe rig. 16S rRNA gene amplicon sequencing indicated that bulk water and corresponding biofilm typically had distinct taxonomic compositions (R2Adonis=0.246, PAdonis=0.001), yet similar predicted functions based on PICRUSt analysis (R2Adonis=0.087, PAdonis=0.001). Although a prior study had identified 51 °C under low water use frequency to enrich Legionella at the tap, here we reveal that 51 °C is also a threshold above which there are marked effects of the combined influences of temperature, pipe orientation, and use frequency on taxonomic and functional composition. A positive association was noted between relative abundances of Legionella and mitochondrial DNA of Vermamoeba, a genus of amoebae that can enhance virulence and facilitate replication of some pathogens. This study takes a step towards intentional control of the plumbing microbiome and highlights the importance of microbial ecology in governing pathogen proliferation. PMID:28282040

  7. Investigation of the prevalence of Legionella species in domestic hot water systems.

    PubMed

    Bates, M N; Maas, E; Martin, T; Harte, D; Grubner, M; Margolin, T

    2000-06-09

    To investigate the prevalence of Legionella spp. in the hot water systems of a representative sample of Wellington domestic residences with electrically heated hot water systems, and to investigate risk factors (eg water temperature, plumbing materials) for such contamination. 100 households with electrically heated hot water systems in the Wellington area were investigated. Samples of hot water from several hot water outlets were collected, and characteristics of the plumbing system were recorded. Water samples and swabs were cultured and further examined by polymerase chain reaction (PCR) and direct fluorescence antibody (DFA) testing to identify Legionella spp. and serogroups. No Legionella spp. were isolated by culture. PCR tested positive for Legionella in specimens from twelve residences. Six of these were also positive by DFA testing. The only environmental factor found to be associated with the presence of Legionella was recent plumbing work on the hot water system. Five of the twelve PCR-positive residences, and four of the six DFA-confirmed residences had hot water delivery temperatures in excess of 60 degrees C. The results suggest that either Legionellae colonise domestic hot water reticulation systems and/or that the organisms are killed during passage through the hot water tank. Both possibilities may be correct. Further work to characterise the microbial ecology of Legionella-positive hot water distribution systems would be useful, as would the development of improved methods for culturing the organisms from potable water.

  8. Comparative assessment of chlorine, heat, ozone, and UV light for killing Legionella pneumophila within a model plumbing system.

    PubMed Central

    Muraca, P; Stout, J E; Yu, V L

    1987-01-01

    Nosocomial Legionnaires disease can be acquired by exposure to the organism from the hospital water distribution system. As a result, many hospitals have instituted eradication procedures, including hypercholorination and thermal eradication. We compared the efficacy of ozonation, UV light, hyperchlorination, and heat eradication using a model plumbing system constructed of copper piping, brass spigots, Plexiglas reservoir, electric hot water tank, and a pump. Legionella pneumophila was added to the system at 10(7) CFU/ml. Each method was tested under three conditions; (i) nonturbid water at 25 degrees C, (ii) turbid water at 25 degrees C, and (iii) nonturbid water at 43 degrees C. UV light and heat killed L. pneumophila most rapidly and required minimal maintenance. Both UV light and heat (60 degrees C) produced a 5 log kill in less than 1 h. In contrast, both chlorine and ozone required 5 h of exposure to produce a 5 log decrease. Neither turbidity nor the higher temperature of 43 degrees C impaired the efficacy of any of the disinfectant methods. Surprisingly, higher temperature enhanced the disinfecting efficacy of chlorine. However, higher temperature accelerated the decomposition of the chlorine residual such that an additional 120% volume of chlorine was required. All four methods proved efficacious in eradicating L. pneumophila from a model plumbing system. Images PMID:3566272

  9. Residential tap water contamination following the Freedom Industries chemical spill: perceptions, water quality, and health impacts.

    PubMed

    Whelton, Andrew J; McMillan, LaKia; Connell, Matt; Kelley, Keven M; Gill, Jeff P; White, Kevin D; Gupta, Rahul; Dey, Rajarshi; Novy, Caroline

    2015-01-20

    During January 2014, an industrial solvent contaminated West Virginia’s Elk River and 15% of the state population’s tap water. A rapid in-home survey and water testing was conducted 2 weeks following the spill to understand resident perceptions, tap water chemical levels, and premise plumbing flushing effectiveness. Water odors were detected in all 10 homes sampled before and after premise plumbing flushing. Survey and medical data indicated flushing caused adverse health impacts. Bench-scale experiments and physiochemical property predictions showed flushing promoted chemical volatilization, and contaminants did not appreciably sorb into cross-linked polyethylene (PEX) pipe. Flushing reduced tap water 4-methylcyclohexanemethanol (4-MCHM) concentrations within some but not all homes. 4-MCHM was detected at unflushed (<10 to 420 μg/L) and flushed plumbing systems (<10 to 96 μg/L) and sometimes concentrations differed among faucets within each home. All waters contained less 4-MCHM than the 1000 μg/L Centers for Disease Control drinking water limit, but one home exceeded the 120 μg/L drinking water limit established by independent toxicologists. Nearly all households refused to resume water use activities after flushing because of water safety concerns. Science based flushing protocols should be developed to expedite recovery, minimize health impacts, and reduce concentrations in homes when future events occur.

  10. The Influence of Plumbing System Structure on Volcano Dimensions and Topography

    NASA Astrophysics Data System (ADS)

    Castruccio, Angelo; Diez, Mikel; Gho, Rayen

    2017-11-01

    Volcano morphology has been traditionally studied from a descriptive point of view, but in this work we took a different more quantitative perspective. Here we used volcano dimensions such as height and basal radius, together with the topographic profile as indicators of key plumbing system properties. We started by coupling models for the ascent of magma and extrusion of lava flows with those for volcano edifice construction. We modeled volcanic edifices as a pile of lavas that are emitted from a single vent and reduce in volume with time. We then selected a number of arc-volcano examples to test our physical relationships and estimate parameters, which were compared with independent methods. Our results indicate that large volcanoes (>2,000 m height and base radius >10 km) usually are basaltic systems with overpressured sources located at more than 15 km depth. On the other hand, smaller volcanoes (<2,000 m height and basal radius <10 km) are associated with more evolved systems where the chambers feeding eruptions are located at shallower levels in the crust (<10 km). We find that surface observations on height and basal radius of a volcano and its lavas can give estimates of fundamental properties of the plumbing system, specifically the depth and size of the magma chamber feeding eruptions, as the structure of the magmatic system determines the morphology of the volcanic edifice.

  11. Degassing behavior of Mt. Etna volcano (Italy) before and during the 2008-2009 eruption, inferred from crater plume and soil gas measurements

    NASA Astrophysics Data System (ADS)

    Salerno, Giuseppe; La Spina, Alessandro; Giammanco, Salvatore; Burton, Michael; Caltabiano, Tommaso; Murè, Filippo; Randazzo, Daniele; Lopez, Manuela; Bruno, Nicola; Longo, Vincenza

    2010-05-01

    The evolution of magmatic degassing that preceded and accompanied the 2008-2009 Mt. Etna eruption was monitored by using a combination of: i) near-daily SO2 flux measurements; ii) calculated HCl and HF fluxes, obtained combining the daily SO2 flux values with discrete FTIR measurements of SO2/HCl and SO2/HF molar ratios; iii) periodic soil CO2 flux measurements. Thanks to the differential release of magmatic gas species from an ascending magma body we were able to track the magma transfer process in the volcano plumbing system from depth (< 5 km) to the surface. Our data suggest that the intermittent paroxysmal activity that mainly affected the South-East Crater (SEC) during 2007, displayed the efficient but complex nature of Mt. Etna's plumbing system, with gas-rich magma ascending and degassing via the central conduit system prior to eruption at the peripheral SEC. Conversely, the 15 month long 2008-09 eruption event was characterized by quasi steady state magma supply. The calculated volume of magma required to produce the observed SO2 flux during the 2008-2009 eruption closely matches the volume of erupted magma. This "eruptive" steady-state would indicate an almost perfect process of magma migration and eruption at the surface, without substantial storage within the volcano plumbing system.

  12. California's "Free" Universities

    ERIC Educational Resources Information Center

    Cudhea, David

    1974-01-01

    Heliotrope, Orpheus, and Communiversity, San Francisco's three free universities, offer curricula with combinations of alchemy, magic, Volkswagen repairs, options in education, dance, conversational Mandarin, basic plumbing, and brain wave experiences. (Author/PG)

  13. User's manual for three dimensional FDTD version C code for scattering from frequency-independent dielectric and magnetic materials

    NASA Technical Reports Server (NTRS)

    Beggs, John H.; Luebbers, Raymond J.; Kunz, Karl S.

    1991-01-01

    The Penn State Finite Difference Time Domain Electromagnetic Scattering Code Version C is a three dimensional numerical electromagnetic scattering code based upon the Finite Difference Time Domain Technique (FDTD). The supplied version of the code is one version of our current three dimensional FDTD code set. This manual provides a description of the code and corresponding results for several scattering problems. The manual is organized into fourteen sections: introduction, description of the FDTD method, operation, resource requirements, Version C code capabilities, a brief description of the default scattering geometry, a brief description of each subroutine, a description of the include file (COMMONC.FOR), a section briefly discussing Radar Cross Section (RCS) computations, a section discussing some scattering results, a sample problem setup section, a new problem checklist, references and figure titles.

  14. User's manual for three dimensional FDTD version D code for scattering from frequency-dependent dielectric and magnetic materials

    NASA Technical Reports Server (NTRS)

    Beggs, John H.; Luebbers, Raymond J.; Kunz, Karl S.

    1991-01-01

    The Penn State Finite Difference Time Domain Electromagnetic Scattering Code Version D is a three dimensional numerical electromagnetic scattering code based upon the Finite Difference Time Domain Technique (FDTD). The supplied version of the code is one version of our current three dimensional FDTD code set. This manual provides a description of the code and corresponding results for several scattering problems. The manual is organized into fourteen sections: introduction, description of the FDTD method, operation, resource requirements, Version D code capabilities, a brief description of the default scattering geometry, a brief description of each subroutine, a description of the include file (COMMOND.FOR), a section briefly discussing Radar Cross Section (RCS) computations, a section discussing some scattering results, a sample problem setup section, a new problem checklist, references and figure titles.

  15. User's manual for three dimensional FDTD version A code for scattering from frequency-independent dielectric materials

    NASA Technical Reports Server (NTRS)

    Beggs, John H.; Luebbers, Raymond J.; Kunz, Karl S.

    1992-01-01

    The Penn State Finite Difference Time Domain (FDTD) Electromagnetic Scattering Code Version A is a three dimensional numerical electromagnetic scattering code based on the Finite Difference Time Domain technique. The supplied version of the code is one version of our current three dimensional FDTD code set. The manual provides a description of the code and the corresponding results for the default scattering problem. The manual is organized into 14 sections: introduction, description of the FDTD method, operation, resource requirements, Version A code capabilities, a brief description of the default scattering geometry, a brief description of each subroutine, a description of the include file (COMMONA.FOR), a section briefly discussing radar cross section (RCS) computations, a section discussing the scattering results, a sample problem setup section, a new problem checklist, references, and figure titles.

  16. User's manual for three dimensional FDTD version B code for scattering from frequency-dependent dielectric materials

    NASA Technical Reports Server (NTRS)

    Beggs, John H.; Luebbers, Raymond J.; Kunz, Karl S.

    1991-01-01

    The Penn State Finite Difference Time Domain Electromagnetic Scattering Code Version B is a three dimensional numerical electromagnetic scattering code based upon the Finite Difference Time Domain Technique (FDTD). The supplied version of the code is one version of our current three dimensional FDTD code set. This manual provides a description of the code and corresponding results for several scattering problems. The manual is organized into fourteen sections: introduction, description of the FDTD method, operation, resource requirements, Version B code capabilities, a brief description of the default scattering geometry, a brief description of each subroutine, a description of the include file (COMMONB.FOR), a section briefly discussing Radar Cross Section (RCS) computations, a section discussing some scattering results, a sample problem setup section, a new problem checklist, references and figure titles.

  17. Model Children's Code.

    ERIC Educational Resources Information Center

    New Mexico Univ., Albuquerque. American Indian Law Center.

    The Model Children's Code was developed to provide a legally correct model code that American Indian tribes can use to enact children's codes that fulfill their legal, cultural and economic needs. Code sections cover the court system, jurisdiction, juvenile offender procedures, minor-in-need-of-care, and termination. Almost every Code section is…

  18. Measure Guideline: Transitioning to a Tankless Water Heater

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Brozyna, K.; Rapport, A.

    2012-09-01

    This Measure Guideline provides information to help residential builders and retrofitters with the design, specification, selection, implementation, installation, and maintenance issues of transitioning from tank-type water heaters to tankless water heaters. The report compares the differences between tankless and tank-type water heaters, highlighting the energy savings that can be realized by adopting tankless water heaters over tank-type water heaters. Selection criteria and risks discussed include unit sizing and location, water distribution system, plumbing line length and diameter, water quality, electrical backup, and code issues. Cost and performance data are provided for various types of tankless and tank-type water heaters, bothmore » natural gas fired and electric. Also considered are interactions between the tankless water heater and other functional elements of a house, such as cold water supply and low-flow devices. Operating costs and energy use of water distribution systems for single- and two-story houses are provided, along with discussion of the various types of distribution systems that can be used with tankless water heaters. Finally, details to prepare for proper installation of a tankless water heater are described.« less

  19. Prevalence of Infection-Competent Serogroup 6 Legionella pneumophila within Premise Plumbing in Southeast Michigan.

    PubMed

    Byrne, Brenda G; McColm, Sarah; McElmurry, Shawn P; Kilgore, Paul E; Sobeck, Joanne; Sadler, Rick; Love, Nancy G; Swanson, Michele S

    2018-02-06

    Coinciding with major changes to its municipal water system, Flint, MI, endured Legionnaires' disease outbreaks in 2014 and 2015. By sampling premise plumbing in Flint in the fall of 2016, we found that 12% of homes harbored legionellae, a frequency similar to that in residences in neighboring areas. To evaluate the genetic diversity of Legionella pneumophila in Southeast Michigan, we determined the sequence type (ST) and serogroup (SG) of the 18 residential isolates from Flint and Detroit, MI, and the 33 clinical isolates submitted by hospitals in three area counties in 2013 to 2016. Common to one environmental and four clinical samples were strains of L. pneumophila SG1 and ST1, the most prevalent ST worldwide. Among the Flint premise plumbing isolates, 14 of 16 strains were of ST367 and ST461, two closely related SG6 strain types isolated previously from patients and corresponding environmental samples. Each of the representative SG1 clinical strains and SG6 environmental isolates from Southeast Michigan infected and survived within macrophage cultures at least as well as a virulent laboratory strain, as judged by microscopy and by enumerating CFU. Likewise, 72 h after infection, the yield of viable-cell counts increased >100-fold for each of the representative SG1 clinical isolates, Flint premise plumbing SG6 ST367 and -461 isolates, and two Detroit residential isolates. We verified by immunostaining that SG1-specific antibody does not cross-react with the SG6 L. pneumophila environmental strains. Because the widely used urinary antigen diagnostic test does not readily detect non-SG1 L. pneumophila , Legionnaires' disease caused by SG6 L. pneumophila is likely underreported worldwide. IMPORTANCE L. pneumophila is the leading cause of disease outbreaks associated with drinking water in the United States. Compared to what is known of the established risks of colonization within hospitals and hotels, relatively little is known about residential exposure to L. pneumophila One year after two outbreaks of Legionnaires' disease in Genesee County, MI, that coincided with damage to the Flint municipal water system, our multidisciplinary team launched an environmental surveillance and laboratory research campaign aimed at informing risk management strategies to provide safe public water supplies. The most prevalent L. pneumophila strains isolated from residential plumbing were closely related strains of SG6. In laboratory tests of virulence, the SG6 environmental isolates resembled SG1 clinical strains, yet they are not readily detected by the common diagnostic urinary antigen test, which is specific for SG1. Therefore, our study complements the existing epidemiological literature indicating that Legionnaires' disease due to non-SG1 strains is underreported around the globe. Copyright © 2018 Byrne et al.

  20. 31 CFR 11.6 - Terms of permit.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... normal cleaning, maintenance, and repair of the building structure in and adjacent to the vending... Treasury bureau; and that all plumbing, electrical, and mechanical costs related to the renovation of...

  1. 7 CFR 3550.57 - Dwelling requirements.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... amount required to address the specific need. (b) New dwellings. Construction must meet the requirements..., heating, plumbing, water, and wastewater disposal systems; and be free of termites and other wood damaging...

  2. WaterSense Labeled New Homes

    EPA Pesticide Factsheets

    Homes built to meet EPA's specification can earn the WaterSense label. EPA criteria include WaterSense labeled plumbing fixtures, efficient hot water delivery systems, water-smart landscape design, and other features.

  3. A Plug-and-Play Duct System Evaluation

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Beach, Robert; Dickson, Bruce; Grisolia, Anthony

    This report describes an air distribution system composed of a series of uniformly-sized ducts that terminate in rooms throughout the home and return to a central manifold, similar in fashion to a “home-run” cross-linked polyethylene plumbing system. With a well-designed manifold, each duct receives an equal static pressure potential for airflow from the air handling unit, and the number of needed ducts for each room are simply attached to fittings located on the manifold; in this sense, the system is plug-and-play (PnP). As indicated, all ducts in the PnP system are identical in size and small enough to fit inmore » the ceiling and wall cavities of a house (i.e., less than 3.5-in. outer diameter). These ducts are also more appropriately sized for the lower airflow requirements of modern, energy-efficient homes; therefore, the velocity of the air moving through the duct is between that of conventional duct systems (approximately 700 ft/min) and high-velocity systems (more than 1,500 ft/min) on the market today. The PnP duct system uses semi-rigid plastic pipes, which have a smooth inner wall and are straightforward to install correctly, resulting in a system that has minimal air leakage. However, plastic ducts are currently not accepted by code for use in residential buildings; therefore, the project team considered other duct materials for the system that are currently accepted by code, such as small-diameter, wirehelix, flexible ductwork.« less

  4. A Plug-and-Play Duct System Evaluation

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Beach, R.; Dickson, B.; Grisolia, A.

    2017-07-01

    This report describes an air distribution system composed of a series of uniformly-sized ducts that terminate in rooms throughout the home and return to a central manifold, similar in fashion to a “home-run” cross-linked polyethylene plumbing system. With a well-designed manifold, each duct receives an equal static pressure potential for airflow from the air handling unit, and the number of needed ducts for each room are simply attached to fittings located on the manifold; in this sense, the system is plug-and-play (PnP). As indicated, all ducts in the PnP system are identical in size and small enough to fit inmore » the ceiling and wall cavities of a house (i.e., less than 3.5-in. outer diameter). These ducts are also more appropriately sized for the lower airflow requirements of modern, energy-efficient homes; therefore, the velocity of the air moving through the duct is between that of conventional duct systems (approximately 700 ft/min) and high-velocity systems (more than 1,500 ft/min) on the market today. The PnP duct system uses semi-rigid plastic pipes, which have a smooth inner wall and are straightforward to install correctly, resulting in a system that has minimal air leakage. However, plastic ducts are currently not accepted by code for use in residential buildings; therefore, the project team considered other duct materials for the system that are currently accepted by code, such as small-diameter, wirehelix, flexible ductwork.« less

  5. 48 CFR 36.501 - Performance of work by the contractor.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... SPECIAL CATEGORIES OF CONTRACTING CONSTRUCTION AND ARCHITECT-ENGINEER CONTRACTS Contract Clauses 36.501.... Specialties such as plumbing, heating, and electrical work are usually subcontracted, and should not normally...

  6. 48 CFR 36.501 - Performance of work by the contractor.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... SPECIAL CATEGORIES OF CONTRACTING CONSTRUCTION AND ARCHITECT-ENGINEER CONTRACTS Contract Clauses 36.501.... Specialties such as plumbing, heating, and electrical work are usually subcontracted, and should not normally...

  7. 48 CFR 36.501 - Performance of work by the contractor.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... SPECIAL CATEGORIES OF CONTRACTING CONSTRUCTION AND ARCHITECT-ENGINEER CONTRACTS Contract Clauses 36.501.... Specialties such as plumbing, heating, and electrical work are usually subcontracted, and should not normally...

  8. 48 CFR 36.501 - Performance of work by the contractor.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... SPECIAL CATEGORIES OF CONTRACTING CONSTRUCTION AND ARCHITECT-ENGINEER CONTRACTS Contract Clauses 36.501.... Specialties such as plumbing, heating, and electrical work are usually subcontracted, and should not normally...

  9. 48 CFR 36.501 - Performance of work by the contractor.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... SPECIAL CATEGORIES OF CONTRACTING CONSTRUCTION AND ARCHITECT-ENGINEER CONTRACTS Contract Clauses 36.501.... Specialties such as plumbing, heating, and electrical work are usually subcontracted, and should not normally...

  10. Pebbles in Your Plumbing: Flushing Kidney Stones

    MedlinePlus

    ... Privacy Accessibility Freedom of Information Act No Fear Act Office of Inspector General USA.gov – Government Made Easy NIH…Turning Discovery Into Health ® National Institutes of Health 9000 Rockville ...

  11. Attenuation and scattering tomography of the deep plumbing system of Mount St. Helens

    USGS Publications Warehouse

    De Siena, Luca; Thomas, Christine; Waite, Greg P.; Moran, Seth C.; Klemme, Stefan

    2014-01-01

    We present a combined 3-D P wave attenuation, 2-D S coda attenuation, and 3-D S coda scattering tomography model of fluid pathways, feeding systems, and sediments below Mount St. Helens (MSH) volcano between depths of 0 and 18 km. High-scattering and high-attenuation shallow anomalies are indicative of magma and fluid-rich zones within and below the volcanic edifice down to 6 km depth, where a high-scattering body outlines the top of deeper aseismic velocity anomalies. Both the volcanic edifice and these structures induce a combination of strong scattering and attenuation on any seismic wavefield, particularly those recorded on the northern and eastern flanks of the volcanic cone. North of the cone between depths of 0 and 10 km, a low-velocity, high-scattering, and high-attenuation north-south trending trough is attributed to thick piles of Tertiary marine sediments within the St. Helens Seismic Zone. A laterally extended 3-D scattering contrast at depths of 10 to 14 km is related to the boundary between upper and lower crust and caused in our interpretation by the large-scale interaction of the Siletz terrane with the Cascade arc crust. This contrast presents a low-scattering, 4–6 km2 “hole” under the northeastern flank of the volcano. We infer that this section represents the main path of magma ascent from depths greater than 6 km at MSH, with a small north-east shift in the lower plumbing system of the volcano. We conclude that combinations of different nonstandard tomographic methods, leading toward full-waveform tomography, represent the future of seismic volcano imaging.

  12. Flushometer-Valve Toilets Specification and Certification

    EPA Pesticide Factsheets

    Flushometer-valve toilets, also known as flushometer-valve water closets in plumbing standards, are typically found in commercial, institutional, or industrial restrooms, in such places as airports, theaters, stadiums, schools, and office buildings.

  13. 16 CFR 305.16 - Labeling and marking for plumbing products.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... printed matter distributed or displayed in connection with such product (including packaging and point-of-sale material, catalog material, and print advertising) shall include, in a conspicuous manner, the...

  14. 48 CFR 852.236-79 - Daily report of workers and material.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ..., mechanics, foremen/forewomen and pieces of heavy equipment used or employed by the contractor and... concrete, plastering, masonry, plumbing, sheet metal work, etc. The report shall give a breakdown of...

  15. 48 CFR 852.236-79 - Daily report of workers and material.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ..., mechanics, foremen/forewomen and pieces of heavy equipment used or employed by the contractor and... concrete, plastering, masonry, plumbing, sheet metal work, etc. The report shall give a breakdown of...

  16. 48 CFR 852.236-79 - Daily report of workers and material.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ..., mechanics, foremen/forewomen and pieces of heavy equipment used or employed by the contractor and... concrete, plastering, masonry, plumbing, sheet metal work, etc. The report shall give a breakdown of...

  17. 48 CFR 852.236-79 - Daily report of workers and material.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ..., mechanics, foremen/forewomen and pieces of heavy equipment used or employed by the contractor and... concrete, plastering, masonry, plumbing, sheet metal work, etc. The report shall give a breakdown of...

  18. 48 CFR 852.236-79 - Daily report of workers and material.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ..., mechanics, foremen/forewomen and pieces of heavy equipment used or employed by the contractor and... concrete, plastering, masonry, plumbing, sheet metal work, etc. The report shall give a breakdown of...

  19. 26 CFR 6a.103A-3 - Qualified veterans' mortgage bonds.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... renovation of plumbing or electric systems, the installation of improved heating or air conditioning systems... the active military, naval, or air service, and who was discharged or released therefrom under...

  20. Investigating the deepest part of a volcano plumbing system: Evidence for an active magma path below the western flank of Piton de la Fournaise (La Réunion Island)

    NASA Astrophysics Data System (ADS)

    Boudoire, G.; Liuzzo, M.; Di Muro, A.; Ferrazzini, V.; Michon, L.; Grassa, F.; Derrien, A.; Villeneuve, N.; Bourdeu, A.; Brunet, C.; Giudice, G.; Gurrieri, S.

    2017-07-01

    Peripheral diffuse degassing of CO2 from the soil occurs across the western flank of Piton de la Fournaise volcano (La Réunion Island, Indian Ocean) along a narrow zone. In this area, carbon isotopic analysis on soil gas samples highlights significant mixing between magmatic and organic end-members. The zones with the strongest magmatic signature (highest δ13C) overlap spatial distribution of hypocenters recorded shortly before and during volcano reactivation and allow discriminating a N135° degassing lineament, with a minimum length of 11 km and 140 ± 20 m-width. Such orientation is in accordance with that of an old dyke network along the rift zone and with N120-130° and N140-155° lineaments related to the inheritance of oceanic lithosphere structures. Our findings show that this N135° lineament represents a preferential magmatic pathway for deep magma transfer below the volcano flank. Moreover, spatial distributions of recent eccentric cones indicate a well-founded possibility that future eruptions may by-pass the shallow plumbing system of the central area of the volcano, taking a lateral pathway along this structure. Our results also confirm that Piton de la Fournaise activity is linked to a laterally shifted plumbing system and represent a major improvement in identifying the main high-risk area on the densely populated western flank of the volcano.

  1. The role of physical content in piagetian spatial tasks: Sex differences in spatial knowledge?

    NASA Astrophysics Data System (ADS)

    Golbeck, Susan L.

    Sex-related differences on Piagetian horizontality (water level) and verticality (plumb line) tasks were examined in 64 college students. It was hypothesized that females' difficulties on these Euclidean spatial problems are due not to differences in underlying spatial competence, but rather to differences in knowledge of task specific information about the physical properties of water levels and plumb lines. This was tested by presenting subjects with the standard water level and plumb line problems and also modified problems not requiring knowledge of physical principles (i.e., drawing straight up and down or straight across lines inside tipped rectangles). While males were expected to outperform females on the standard tasks, no sex differences were expected on the modified tasks. Results of an ANOVA on scores for horizontality and verticality each showed main effects for sex and task version but failed to reveal the hypothesized interaction. However, performance on the Euclidean spatial tasks was also considered in terms of overall success versus failure. While males were more successful than females in the standard format, males and females were equally successful in the modified, nonphysical, format. Hence, college aged males and females generally do not differ in spatial competence although they may be differentially influenced by task content. Findings are discussed in terms of their implications for theory and practice. It is emphasized that science educators must be especially aware of such task influences for females so that performance deficits are not mistaken for competence deficits.

  2. An experimental study of the role of subsurface plumbing on geothermal discharge

    USGS Publications Warehouse

    Namiki, Atsuko; Ueno, Yoshinori; Hurwitz, Shaul; Manga, Michael; Munoz-Saez, Carolina; Murphy, Fred

    2016-01-01

    In order to better understand the diverse discharge styles and eruption intervals observed at geothermal features, we performed three series of laboratory experiments with differing plumbing geometries. A single, straight conduit that connects a hot water bath (flask) to a vent (funnel) can originate geyser-like periodic eruptions, continuous discharge like a boiling spring, and fumarole-like steam discharge, depending on the conduit length and radius. The balance between the heat loss from the conduit walls and the heat supplied from the bottom determines whether and where water can condense which in turn controls discharge style. Next, we connected the conduit to a cold water reservoir through a branch, simulating the inflow from an external water source. Colder water located at a higher elevation than a branching point can flow into the conduit to stop the boiling in the flask, controlling the periodicity of the eruption. When an additional branch is connected to a second cold water reservoir, the two cold reservoirs can interact. Our experiments show that branching allows new processes to occur, such as recharge of colder water and escape of steam from side channels, leading to greater variation in discharge styles and eruption intervals. This model is consistent with the fact that eruption duration is not controlled by emptying reservoirs. We show how differences in plumbing geometries can explain various discharge styles and eruption intervals observed in El Tatio, Chile, and Yellowstone, USA.

  3. The plumbing system of the Pagosa thermal Springs, Colorado: Application of geologically constrained geophysical inversion and data fusion

    NASA Astrophysics Data System (ADS)

    Revil, A.; Cuttler, S.; Karaoulis, M.; Zhou, J.; Raynolds, B.; Batzle, M.

    2015-06-01

    Fault and fracture networks usually provide the plumbing for movement of hydrothermal fluids in geothermal fields. The Big Springs of Pagosa Springs in Colorado is known as the deepest geothermal hot springs in the world. However, little is known about the plumbing system of this hot spring, especially regarding the position of the reservoir (if any) or the position of the major tectonic faults controlling the flow of the thermal water in this area. The Mancos shale, a Cretaceous shale, dominates many of the surface expressions around the springs and impede an easy recognition of the fault network. We use three geophysical methods (DC resistivity, self-potential, and seismic) to image the faults in this area, most of which are not recognized in the geologic fault map of the region. Results from these surveys indicate that the hot Springs (the Big Spring and a warm spring located 1.8 km further south) are located at the intersection of the Victoire Fault, a major normal crustal fault, and two north-northeast trending faults (Fault A and B). Self-potential and DC resistivity tomographies can be combined and a set of joint attributes defined to determine the localization of the flow of hot water associated with the Eight Miles Mesa Fault, a second major tectonic feature responsible for the occurrence of warm springs further West and South from the Big Springs of Pagosa Springs.

  4. 75 FR 33992 - Interest and Penalty Suspension Provisions Under Section 6404(g) of the Internal Revenue Code

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-06-16

    ... Interest and Penalty Suspension Provisions Under Section 6404(g) of the Internal Revenue Code AGENCY.... SUMMARY: This document contains final regulations under section 6404(g)(2)(E) of the Internal Revenue Code... Procedure and Administration Regulations (26 CFR part 301) by adding rules under section 6404(g) relating to...

  5. User's manual for two dimensional FDTD version TEA and TMA codes for scattering from frequency-independent dielectic materials

    NASA Technical Reports Server (NTRS)

    Beggs, John H.; Luebbers, Raymond J.; Kunz, Karl S.

    1991-01-01

    The Penn State Finite Difference Time Domain Electromagnetic Scattering Code Versions TEA and TMA are two dimensional numerical electromagnetic scattering codes based upon the Finite Difference Time Domain Technique (FDTD) first proposed by Yee in 1966. The supplied version of the codes are two versions of our current two dimensional FDTD code set. This manual provides a description of the codes and corresponding results for the default scattering problem. The manual is organized into eleven sections: introduction, Version TEA and TMA code capabilities, a brief description of the default scattering geometry, a brief description of each subroutine, a description of the include files (TEACOM.FOR TMACOM.FOR), a section briefly discussing scattering width computations, a section discussing the scattering results, a sample problem set section, a new problem checklist, references and figure titles.

  6. User's manual for two dimensional FDTD version TEA and TMA codes for scattering from frequency-independent dielectric materials

    NASA Technical Reports Server (NTRS)

    Beggs, John H.; Luebbers, Raymond J.; Kunz, Karl S.

    1991-01-01

    The Penn State Finite Difference Time Domain Electromagnetic Scattering Code Versions TEA and TMA are two dimensional electromagnetic scattering codes based on the Finite Difference Time Domain Technique (FDTD) first proposed by Yee in 1966. The supplied version of the codes are two versions of our current FDTD code set. This manual provides a description of the codes and corresponding results for the default scattering problem. The manual is organized into eleven sections: introduction, Version TEA and TMA code capabilities, a brief description of the default scattering geometry, a brief description of each subroutine, a description of the include files (TEACOM.FOR TMACOM.FOR), a section briefly discussing scattering width computations, a section discussing the scattering results, a sample problem setup section, a new problem checklist, references, and figure titles.

  7. User's manual for three dimensional FDTD version C code for scattering from frequency-independent dielectric and magnetic materials

    NASA Technical Reports Server (NTRS)

    Beggs, John H.; Luebbers, Raymond J.; Kunz, Karl S.

    1992-01-01

    The Penn State Finite Difference Time Domain Electromagnetic Scattering Code Version C is a three-dimensional numerical electromagnetic scattering code based on the Finite Difference Time Domain (FDTD) technique. The supplied version of the code is one version of our current three-dimensional FDTD code set. The manual given here provides a description of the code and corresponding results for several scattering problems. The manual is organized into 14 sections: introduction, description of the FDTD method, operation, resource requirements, Version C code capabilities, a brief description of the default scattering geometry, a brief description of each subroutine, a description of the include file (COMMONC.FOR), a section briefly discussing radar cross section computations, a section discussing some scattering results, a new problem checklist, references, and figure titles.

  8. 26 CFR 7.48-3 - Election to apply the amendments made by sections 804 (a) and (b) of the Tax Reform Act of 1976...

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... the Act to movie and television films that are property described in section 50(a) of the Code and... sections 804 (a) and (b) of the Tax Reform Act of 1976 to property described in section 50(a) of the Code... described in section 50(a) of the Code. (a) General rule. Under section 804(e)(2) of the Tax Reform Act of...

  9. Evaluating lightning hazards to building environments using explicit numerical solutions of Maxwell's equations

    NASA Astrophysics Data System (ADS)

    Collier, Richard S.; McKenna, Paul M.; Perala, Rodney A.

    1991-08-01

    The objective here is to describe the lightning hazards to buildings and their internal environments using advanced formulations of Maxwell's Equations. The method described is the Three Dimensional Finite Difference Time Domain Solution. It can be used to solve for the lightning interaction with such structures in three dimensions with the inclusion of a considerable amount of detail. Special techniques were developed for including wire, plumbing, and rebar into the model. Some buildings have provisions for lightning protection in the form of air terminals connected to a ground counterpoise system. It is shown that fields and currents within these structures can be significantly high during a lightning strike. Time lapse video presentations were made showing the electric and magnetic field distributions on selected cross sections of the buildings during a simulated lightning strike.

  10. Evaluating lightning hazards to building environments using explicit numerical solutions of Maxwell's equations

    NASA Technical Reports Server (NTRS)

    Collier, Richard S.; Mckenna, Paul M.; Perala, Rodney A.

    1991-01-01

    The objective here is to describe the lightning hazards to buildings and their internal environments using advanced formulations of Maxwell's Equations. The method described is the Three Dimensional Finite Difference Time Domain Solution. It can be used to solve for the lightning interaction with such structures in three dimensions with the inclusion of a considerable amount of detail. Special techniques were developed for including wire, plumbing, and rebar into the model. Some buildings have provisions for lightning protection in the form of air terminals connected to a ground counterpoise system. It is shown that fields and currents within these structures can be significantly high during a lightning strike. Time lapse video presentations were made showing the electric and magnetic field distributions on selected cross sections of the buildings during a simulated lightning strike.

  11. Interior vie of bath 2 showing original toilet, tub, and ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Interior vie of bath 2 showing original toilet, tub, and plumbing wall cabinet, facing southeast. - Albrook Air Force Station, Company Officer's Quarters, East side of Canfield Avenue, Balboa, Former Panama Canal Zone, CZ

  12. 37 CFR 6.2 - Prior U.S. schedule of classes of goods and services.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... and polishing materials. 5 Adhesives. 6 Chemicals and chemical compositions. 7 Cordage. 8 Smokers... Fertilizers. 11 Inks and inking materials. 12 Construction materials. 13 Hardware and plumbing and...

  13. 37 CFR 6.2 - Prior U.S. schedule of classes of goods and services.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... and polishing materials. 5 Adhesives. 6 Chemicals and chemical compositions. 7 Cordage. 8 Smokers... Fertilizers. 11 Inks and inking materials. 12 Construction materials. 13 Hardware and plumbing and...

  14. 37 CFR 6.2 - Prior U.S. schedule of classes of goods and services.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... and polishing materials. 5 Adhesives. 6 Chemicals and chemical compositions. 7 Cordage. 8 Smokers... Fertilizers. 11 Inks and inking materials. 12 Construction materials. 13 Hardware and plumbing and...

  15. 37 CFR 6.2 - Prior U.S. schedule of classes of goods and services.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... and polishing materials. 5 Adhesives. 6 Chemicals and chemical compositions. 7 Cordage. 8 Smokers... Fertilizers. 11 Inks and inking materials. 12 Construction materials. 13 Hardware and plumbing and...

  16. 75 FR 28632 - Federal Housing Administration (FHA)-Temporary Exemption From Compliance With FHA's Regulation on...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-05-21

    ... and balconies, walkways and driveways. iii The roofing, plumbing systems, electrical systems, heating and air conditioning systems; iv. All interiors; and v. All insulation and ventilation systems, as...

  17. In Pursuit of a Better Seed Trap

    Treesearch

    Adam Wiese; John Zasada; Terry Strong

    1998-01-01

    Seed and litter traps are tools used by foresters and ecologists. We describe two different types of a durable trap constructed from plastic plumbing pipe, which are easily assembled/disassembled for efficient transportation and storage.

  18. 76 FR 22003 - Delegation of Functions and Authority Under Sections 315 and 325 of Title 32, United States Code

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-04-20

    ... Functions and Authority Under Sections 315 and 325 of Title 32, United States Code Memorandum for the... United States of America, including section 301 of title 3, United States Code, I hereby delegate to you: (a) the functions and authority of the President contained in section 315 of title 32, United States...

  19. 75 FR 46903 - Notice of Proposed Changes to the National Handbook of Conservation Practices for the Natural...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-08-04

    ... Treatment (Code 521D), Pond Sealing or Lining--Soil Dispersant Treatment (Code 521B), Salinity and Sodic Soil Management (Code 610), Stream Habitat Improvement and Management (Code 395), Vertical Drain (Code... the criteria section; an expansion of the considerations section to include fish and wildlife and soil...

  20. 30 CFR 905.816 - Performance standards-Surface mining activities.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... Quality Control Act, Cal. Pub. Res. Code section 13000 et seq.; the California Water Code section 1200 et seq.; the California Air Pollution Control Laws, Cal. Health & Safety Code section 39000 et seq.; the..., DEPARTMENT OF THE INTERIOR PROGRAMS FOR THE CONDUCT OF SURFACE MINING OPERATIONS WITHIN EACH STATE CALIFORNIA...

  1. 30 CFR 905.817 - Performance standards-Underground mining activities.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... Quality Control Act, Cal. Pub. Res. Code section 13000 et seq.; the California Water Code section 1200 et seq.; the California Air Pollution Control Laws, Cal. Health & Safety Code section 39000 et seq.; the..., DEPARTMENT OF THE INTERIOR PROGRAMS FOR THE CONDUCT OF SURFACE MINING OPERATIONS WITHIN EACH STATE CALIFORNIA...

  2. 30 CFR 905.817 - Performance standards-Underground mining activities.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... Quality Control Act, Cal. Pub. Res. Code section 13000 et seq.; the California Water Code section 1200 et seq.; the California Air Pollution Control Laws, Cal. Health & Safety Code section 39000 et seq.; the..., DEPARTMENT OF THE INTERIOR PROGRAMS FOR THE CONDUCT OF SURFACE MINING OPERATIONS WITHIN EACH STATE CALIFORNIA...

  3. 30 CFR 905.816 - Performance standards-Surface mining activities.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... Quality Control Act, Cal. Pub. Res. Code section 13000 et seq.; the California Water Code section 1200 et seq.; the California Air Pollution Control Laws, Cal. Health & Safety Code section 39000 et seq.; the..., DEPARTMENT OF THE INTERIOR PROGRAMS FOR THE CONDUCT OF SURFACE MINING OPERATIONS WITHIN EACH STATE CALIFORNIA...

  4. 30 CFR 905.816 - Performance standards-Surface mining activities.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... Quality Control Act, Cal. Pub. Res. Code section 13000 et seq.; the California Water Code section 1200 et seq.; the California Air Pollution Control Laws, Cal. Health & Safety Code section 39000 et seq.; the..., DEPARTMENT OF THE INTERIOR PROGRAMS FOR THE CONDUCT OF SURFACE MINING OPERATIONS WITHIN EACH STATE CALIFORNIA...

  5. 30 CFR 905.817 - Performance standards-Underground mining activities.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... Quality Control Act, Cal. Pub. Res. Code section 13000 et seq.; the California Water Code section 1200 et seq.; the California Air Pollution Control Laws, Cal. Health & Safety Code section 39000 et seq.; the..., DEPARTMENT OF THE INTERIOR PROGRAMS FOR THE CONDUCT OF SURFACE MINING OPERATIONS WITHIN EACH STATE CALIFORNIA...

  6. 30 CFR 905.816 - Performance standards-Surface mining activities.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... Quality Control Act, Cal. Pub. Res. Code section 13000 et seq.; the California Water Code section 1200 et seq.; the California Air Pollution Control Laws, Cal. Health & Safety Code section 39000 et seq.; the..., DEPARTMENT OF THE INTERIOR PROGRAMS FOR THE CONDUCT OF SURFACE MINING OPERATIONS WITHIN EACH STATE CALIFORNIA...

  7. 30 CFR 905.817 - Peformance standards-Underground mining activities.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... Quality Control Act, Cal. Pub. Res. Code section 13000 et seq.; the California Water Code section 1200 et seq.; the California Air Pollution Control Laws, Cal. Health & Safety Code section 39000 et seq.; the..., DEPARTMENT OF THE INTERIOR PROGRAMS FOR THE CONDUCT OF SURFACE MINING OPERATIONS WITHIN EACH STATE CALIFORNIA...

  8. Progress on China nuclear data processing code system

    NASA Astrophysics Data System (ADS)

    Liu, Ping; Wu, Xiaofei; Ge, Zhigang; Li, Songyang; Wu, Haicheng; Wen, Lili; Wang, Wenming; Zhang, Huanyu

    2017-09-01

    China is developing the nuclear data processing code Ruler, which can be used for producing multi-group cross sections and related quantities from evaluated nuclear data in the ENDF format [1]. The Ruler includes modules for reconstructing cross sections in all energy range, generating Doppler-broadened cross sections for given temperature, producing effective self-shielded cross sections in unresolved energy range, calculating scattering cross sections in thermal energy range, generating group cross sections and matrices, preparing WIMS-D format data files for the reactor physics code WIMS-D [2]. Programming language of the Ruler is Fortran-90. The Ruler is tested for 32-bit computers with Windows-XP and Linux operating systems. The verification of Ruler has been performed by comparison with calculation results obtained by the NJOY99 [3] processing code. The validation of Ruler has been performed by using WIMSD5B code.

  9. Household disrepair and the mental health of low-income urban women.

    PubMed

    Burdette, Amy M; Hill, Terrence D; Hale, Lauren

    2011-02-01

    We employ longitudinal survey data from the Welfare, Children, and Families project (1999, 2001) to examine the effects of household disrepair (e.g., living with leaky structures, busted plumbing, broken windows, and pests) on psychological distress among low-income urban women with children. Building on previous research, we adjust for related housing concepts, neighborhood disorder, financial hardship, and a host of relevant background factors. We also formally test the mediating influences of social support and self-esteem. Our cross-sectional analysis indicated that household disrepair is positively associated with recent symptoms of psychological distress. Our longitudinal change score analysis demonstrates two important patterns. First, women living with household disrepair at baseline are not necessarily vulnerable to increases in symptoms of psychological distress over the 2-year study period. Second, women who report an increase in disrepair over the study period are also likely to report a concurrent increase in symptoms of distress. Although social support and self-esteem favor mental health in our cross-sectional and longitudinal analyses, these psychosocial resources fail to mediate or explain the association between disrepair and distress.

  10. Understanding end water quality in hospitals and other large buildings

    EPA Science Inventory

    Local hospitals are depending on the use of copper silver ionization treatment to control Legionella in premise plumbing. Discussion will show some results that speak to the effectiveness of this treatment to control opportunistic pathogens.

  11. WaterSense Specification for Flushometer-Valve Water Closets Supporting Statement

    EPA Pesticide Factsheets

    The U.S. Environmental Protection Agency’s (EPA’s) WaterSense program released its specification for flushometer-valve water closets to further promote and enhance the market for water-efficient commercial restroom plumbing fixtures.

  12. 14 CFR 158.15 - Project eligibility at PFC levels of $1, $2, or $3.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... of the airport. These areas do not include restaurants, car rental and automobile parking facilities..., ventilation, plumbing, and electrical service), and aircraft fueling facilities next to the gate; (7) A...

  13. 46 CFR 92.20-90 - Vessels contracted for prior to November 19, 1952.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... and alterations may be made to the same standard as the original construction. (2) Washbasins, showers, and bathtubs if substituted for showers, must be equipped with adequate plumbing including hot and...

  14. 46 CFR 92.20-90 - Vessels contracted for prior to November 19, 1952.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... and alterations may be made to the same standard as the original construction. (2) Washbasins, showers, and bathtubs if substituted for showers, must be equipped with adequate plumbing including hot and...

  15. Search | Galaxy of Images

    Science.gov Websites

    ; Carriages and Sleighs > Centipedes and Millipedes > Chemical Apparatus > Corals and other Zoophytes > Costume and Dress > Crustaceans > Domestic Life > Electrical Apparatus > Explorers ; Plants - Line Drawings > Plumbing and Bath Equipment > Pop-up and Moveable Books > Postal

  16. Book Review: Microbial fish disease manual by J. A. Plumb, and P. R. Bowser

    USGS Publications Warehouse

    Anderson, D.P.

    1985-01-01

    The authors are faculty members of aquaculture departments in major universities, and as such have compiled a manual for use in teaching laboratory diagnostic procedures for field and research pathologists.

  17. Current Epidemiologic Trends of the Nontuberculous Mycobacteria (NTM).

    PubMed

    Falkinham, Joseph O

    2016-06-01

    The nontuberculous mycobacteria (NTM) are waterborne opportunistic pathogens of humans. They are normal inhabitants of premise plumbing, found, for example, in household and hospital shower heads, water taps, aerators, and hot tubs. The hydrophobic NTM are readily aerosolized, and pulmonary infections and hypersensitivity pneumonitis have been traced to the presence of NTM in shower heads. Hypersensitivity pneumonitis in automotive workers was traced to the presence of NTM in metal recovery fluid used in grinding operations. Recently, NTM bacteremia in heart transplant patients has been traced to the presence of NTM in water reservoirs of instruments employed in operating rooms to heat and cool patient blood during periods of mechanical circulation. Although NTM are difficult to eradicate from premise plumbing as a consequence of their disinfectant-resistance and formation of biofilms, measures such as reduction of turbidity and reduction in carbon and nitrogen for growth and the installation of microbiological filters can reduce exposure of NTM to susceptible individuals.

  18. Role of iron and aluminum coagulant metal residuals and lead release from drinking water pipe materials.

    PubMed

    Knowles, Alisha D; Nguyen, Caroline K; Edwards, Marc A; Stoddart, Amina; McIlwain, Brad; Gagnon, Graham A

    2015-01-01

    Bench-scale experiments investigated the role of iron and aluminum residuals in lead release in a low alkalinity and high (> 0.5) chloride-to-sulfate mass ratio (CSMR) in water. Lead leaching was examined for two lead-bearing plumbing materials, including harvested lead pipe and new lead: tin solder, after exposure to water with simulated aluminum sulfate, polyaluminum chloride and ferric sulfate coagulation treatments with 1-25-μM levels of iron or aluminum residuals in the water. The release of lead from systems with harvested lead pipe was highly correlated with levels of residual aluminum or iron present in samples (R(2) = 0.66-0.88), consistent with sorption of lead onto the aluminum and iron hydroxides during stagnation. The results indicate that aluminum and iron coagulant residuals, at levels complying with recommended guidelines, can sometimes play a significant role in lead mobilization from premise plumbing.

  19. KENNEDY SPACE CENTER, FLA. - Before the start of the kickoff presentation for Spaceport Super Safety and Health Day, Center Director Jim Kennedy (left) chats with guest speaker Capt. Charles Plumb (USNR retired) and United Space Alliance Vice President and Deputy Program Manager, Florida Operations, Bill Pickavance. Spaceport Super Safety and Health Day is an annual event at KSC and Cape Canaveral Air Force Station dedicated to reinforcing safe and healthful behaviors in the workforce. Safety Awards were also given to individuals and groups.

    NASA Image and Video Library

    2003-10-15

    KENNEDY SPACE CENTER, FLA. - Before the start of the kickoff presentation for Spaceport Super Safety and Health Day, Center Director Jim Kennedy (left) chats with guest speaker Capt. Charles Plumb (USNR retired) and United Space Alliance Vice President and Deputy Program Manager, Florida Operations, Bill Pickavance. Spaceport Super Safety and Health Day is an annual event at KSC and Cape Canaveral Air Force Station dedicated to reinforcing safe and healthful behaviors in the workforce. Safety Awards were also given to individuals and groups.

  20. Symposium report: the Waters Bioanalysis World Tour: the broadening impact and future of the DMPK laboratory--addressing large-molecule therapeutics.

    PubMed

    De Vooght-Johnson, Ryan

    2011-03-01

    An evening symposium was held at the Museu de Historia de Catalunya (Barcelona, Spain) as a precursor to the European Bioanalysis Forum meeting, as part of the Waters Corporation Bioanalysis World Tour. The symposium was chaired by Robert Plumb and Jing Lin (Waters Corporation, MA, USA) with a focus on the future of the DMPK laboratory and its role in addressing large-molecule therapeutics and biomarkers. Lieve Dillen (Johnson and Johnson, Belgium) spoke on ultra-sensitive peptide quantification, Richard Kay (Quotient Bioresearch, UK) discussed quantifying proteins and peptides in plasma, Ian Wilson (AstraZeneca, UK) covered metabolic biomarkers and Robert Plumb concluded the evening with a presentation on the future of MS in DMPK studies. Following the presentations, all the speakers took questions from the audience and continued lively discussion over a cocktails and canapés reception.

  1. Common Features of Opportunistic Premise Plumbing Pathogens

    PubMed Central

    Falkinham, Joseph O.

    2015-01-01

    Recently it has been estimated that the annual cost of diseases caused by the waterborne pathogens Legionella pneumonia, Mycobacterium avium, and Pseudomonas aeruginosa is $500 million. For the period 2001–2012, the estimated cost of hospital admissions for nontuberculous mycobacterial pulmonary disease, the majority caused by M. avium, was almost $1 billion. These three waterborne opportunistic pathogens are normal inhabitants of drinking water—not contaminants—that share a number of key characteristics that predispose them to survival, persistence, and growth in drinking water distribution systems and premise plumbing. Herein, I list and describe these shared characteristics that include: disinfectant-resistance, biofilm-formation, growth in amoebae, growth at low organic carbon concentrations (oligotrophic), and growth under conditions of stagnation. This review is intended to increase awareness of OPPPs, identify emerging OPPPs, and challenge the drinking water industry to develop novel approaches toward their control. PMID:25918909

  2. Validation of the WIMSD4M cross-section generation code with benchmark results

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Leal, L.C.; Deen, J.R.; Woodruff, W.L.

    1995-02-01

    The WIMSD4 code has been adopted for cross-section generation in support of the Reduced Enrichment for Research and Test (RERTR) program at Argonne National Laboratory (ANL). Subsequently, the code has undergone several updates, and significant improvements have been achieved. The capability of generating group-collapsed micro- or macroscopic cross sections from the ENDF/B-V library and the more recent evaluation, ENDF/B-VI, in the ISOTXS format makes the modified version of the WIMSD4 code, WIMSD4M, very attractive, not only for the RERTR program, but also for the reactor physics community. The intent of the present paper is to validate the procedure to generatemore » cross-section libraries for reactor analyses and calculations utilizing the WIMSD4M code. To do so, the results of calculations performed with group cross-section data generated with the WIMSD4M code will be compared against experimental results. These results correspond to calculations carried out with thermal reactor benchmarks of the Oak Ridge National Laboratory(ORNL) unreflected critical spheres, the TRX critical experiments, and calculations of a modified Los Alamos highly-enriched heavy-water moderated benchmark critical system. The benchmark calculations were performed with the discrete-ordinates transport code, TWODANT, using WIMSD4M cross-section data. Transport calculations using the XSDRNPM module of the SCALE code system are also included. In addition to transport calculations, diffusion calculations with the DIF3D code were also carried out, since the DIF3D code is used in the RERTR program for reactor analysis and design. For completeness, Monte Carlo results of calculations performed with the VIM and MCNP codes are also presented.« less

  3. User's Guide for RESRAD-OFFSITE

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Gnanapragasam, E.; Yu, C.

    2015-04-01

    The RESRAD-OFFSITE code can be used to model the radiological dose or risk to an offsite receptor. This User’s Guide for RESRAD-OFFSITE Version 3.1 is an update of the User’s Guide for RESRAD-OFFSITE Version 2 contained in the Appendix A of the User’s Manual for RESRAD-OFFSITE Version 2 (ANL/EVS/TM/07-1, DOE/HS-0005, NUREG/CR-6937). This user’s guide presents the basic information necessary to use Version 3.1 of the code. It also points to the help file and other documents that provide more detailed information about the inputs, the input forms and features/tools in the code; two of the features (overriding the source termmore » and computing area factors) are discussed in the appendices to this guide. Section 2 describes how to download and install the code and then verify the installation of the code. Section 3 shows ways to navigate through the input screens to simulate various exposure scenarios and to view the results in graphics and text reports. Section 4 has screen shots of each input form in the code and provides basic information about each parameter to increase the user’s understanding of the code. Section 5 outlines the contents of all the text reports and the graphical output. It also describes the commands in the two output viewers. Section 6 deals with the probabilistic and sensitivity analysis tools available in the code. Section 7 details the various ways of obtaining help in the code.« less

  4. Investigation of Near Shannon Limit Coding Schemes

    NASA Technical Reports Server (NTRS)

    Kwatra, S. C.; Kim, J.; Mo, Fan

    1999-01-01

    Turbo codes can deliver performance that is very close to the Shannon limit. This report investigates algorithms for convolutional turbo codes and block turbo codes. Both coding schemes can achieve performance near Shannon limit. The performance of the schemes is obtained using computer simulations. There are three sections in this report. First section is the introduction. The fundamental knowledge about coding, block coding and convolutional coding is discussed. In the second section, the basic concepts of convolutional turbo codes are introduced and the performance of turbo codes, especially high rate turbo codes, is provided from the simulation results. After introducing all the parameters that help turbo codes achieve such a good performance, it is concluded that output weight distribution should be the main consideration in designing turbo codes. Based on the output weight distribution, the performance bounds for turbo codes are given. Then, the relationships between the output weight distribution and the factors like generator polynomial, interleaver and puncturing pattern are examined. The criterion for the best selection of system components is provided. The puncturing pattern algorithm is discussed in detail. Different puncturing patterns are compared for each high rate. For most of the high rate codes, the puncturing pattern does not show any significant effect on the code performance if pseudo - random interleaver is used in the system. For some special rate codes with poor performance, an alternative puncturing algorithm is designed which restores their performance close to the Shannon limit. Finally, in section three, for iterative decoding of block codes, the method of building trellis for block codes, the structure of the iterative decoding system and the calculation of extrinsic values are discussed.

  5. Prevalence of Legionella in premise plumbing in Hungary.

    PubMed

    Barna, Zsófia; Kádár, Mihály; Kálmán, Emese; Scheirich Szax, Anita; Vargha, Márta

    2016-03-01

    Legionella is one of the emerging concerns of water quality in built water environments. Premise plumbing systems are among the recognised sources of infection. In the present study, colonisation of hot water networks in health care facilities, schools, hotels, private residences, office and industrial buildings was investigated. Data was analysed in connection with building and premise plumbing characteristics. Over 60% of all buildings were colonised by Legionella; counts were over 1000 CFU/L in 49%. The most prevalent type was Legionella pneumophila serogroup 2-14, isolated from 75% of the positive samples. Centrally produced hot water was found to be a key risk factor (46% of the samples were positive vs. 16% in individual systems); within this group the type of the building was less relevant. Colonisation levels in schools were similar to hotels or hospitals, representing a previously underestimated risk setting. Systems supplied by water from deep groundwater sources were significantly less likely to be colonised than more vulnerable sources (bank-wall filtration, surface water abstraction or karstic water; 28% vs. 51% positive), regardless of the type of treatment applied, including the presence of disinfection. The aggravating effect of larger, more complex and older buildings on colonisation was also confirmed. The present study represents the first baseline analysis, pre-empting regulation or monitoring requirements for Legionella. The prevalence of legionellae and the identified risk factors are indicative for other settings lacking targeted interventions. The statistically confirmed risk factors can serve as indicators for preliminary risk assessment and the prioritisation of interventions. Copyright © 2015 Elsevier Ltd. All rights reserved.

  6. Field testing hot water temperature reduction as an energy-saving measure--does the Legionella presence change in a clinic's plumbing system?

    PubMed

    Völker, Sebastian; Kistemann, Thomas

    2015-01-01

    Legionella spp. represent a significant health risk for humans. To ensure hygienically safe drinking water, technical guidelines recommend a central potable water hot (PWH) supply temperature of at least 60°C at the calorifier. In a clinic building we monitored whether slightly lowered temperatures in the PWH system led to a systemic change in the growth of these pathogens. In four separate phases we tested different scenarios concerning PWH supply temperatures and disinfection with chlorine dioxide (ClO2). In each phase, we took 5 sets of samples at 17 representative sampling points in the building's drinking water plumbing system. In total we collected 476 samples from the PWH system. All samples were tested (culture-based) for Legionella spp. and serogroups. Additionally, quantitative parameters at each sampling point were collected, which could possibly be associated with the presence of Legionella spp. (Pseudomonas aeruginsoa, heterotrophic plate count at 20°C and 36°C, temperatures, time until constant temperatures were reached, and chlorine dioxide concentration). The presence of Legionella spp. showed no significant reactions after reducing the PWH supply temperature from 63°C to 60°C and 57°C, as long as disinfection with ClO2 was maintained. After omitting the disinfectant, the PWH system showed statistically significant growth rates at 57°C. PWH temperatures which are permanently lowered to less than recommended values should be carefully accompanied by frequent testing, a thorough evaluation of the building's drinking water plumbing system, and hygiene expertise.

  7. Magma Plumbing System at a Young Back-Arc Spreading Center: The Marsili Volcano, Southern Tyrrhenian Sea

    NASA Astrophysics Data System (ADS)

    Trua, T.; Marani, M. P.; Gamberi, F.

    2018-01-01

    Although spreading rate is commonly taken as a proxy for decompression mantle melting at mid-ocean ridges (MORs), magmatism at back-arc spreading centers (BASCs) is further influenced by the subduction-related flux melting of the mantle. These regions consequently show a diversity of crustal structures, lava compositions, and morphologies not typically found in MORs. Here we investigate the crustal plumbing system of the small-scale, Marsili back-arc spreading center of the Southern Tyrrhenian Sea using plagioclase data from a wide spectrum of lavas (basalts to andesites) dredged from its summit and flanks. We employ petrological modeling to identify the plagioclase populations carried in the individual lavas, allocate them to plausible magmatic components present within the plumbing system, and trace the processes occurring during magma ascent to the surface. The properties of the system, such as mush porosity and abundance of the melt bodies, vary from one magma extraction zone to another along the BASC, evidencing the local variability of melt supply conditions. The plagioclase crystals document a range of relationships with the host lavas, indicating magma extraction from a composite, vertically extensive mush and melt-lens system resembling that of MORs. At the same time, however, in small BASCs, such as in the case of the Marsili Basin, crustal accretion and resulting morphology are significantly influenced by the three-dimensional setting of the basin margins. This is an important deviation from the conventional model based on the linear continuity and essentially two-dimensional framework of MORs.

  8. Case study of complaints on drinking water quality: relationship to copper content?

    PubMed

    Pizarro, Fernando; Araya, Magdalena; Vásquez, Marcela; Lagos, Gustavo; Olivares, Manuel; Méndez, Marco A; Leyton, Bárbara; Reyes, Arturo; Letelier, Victoria; Uauy, Ricardo

    2007-05-01

    Several families of Talca city, Chile complained to health authorities for what they attributed to consumption of copper (Cu)-contaminated drinking water. We assessed the situation 6-12 mo after the initiation of complaints by characterizing the symptoms reported, the chemistry of drinking water, and the Cu concentration in stagnant drinking water. After completing a census, 1778 households accepted participation and were categorized as follows: category 1, Cu plumbing for tap water and dwellers reporting health complaints (HC); category 2, Cu plumbing for tap water and dwellers reporting no HC; category 3, plastic plumbing for tap water and dwellers reporting no HC. Questionnaires recorded characteristics of households and symptoms presented by each member of the family in the last 3 mo. The Cu concentration in drinking water was measured in a subsample of 80 homes with Cu pipes. In category 1, participants presented significantly more abdominal pain, diarrhea, and/or vomiting (gastrointestinal [GI] symptoms) in comparison to category 3 and to categories 2 plus 3. The stagnant Cu concentrations measured in drinking water in all houses studied were below the US Environmental Protection Agency guideline value (<1.3 mg Cu/L). In summary, data obtained by interviews suggested that individuals in some areas of Talca city were suffering more GI symptoms potentially related to Cu excess, but measurement of Cu concentration in stagnant tap waters ruled out the association between Cu exposure and GI symptom reports at the time of this study. The dose-response curves for GI symptoms and Cu exposure now available were crucial in the analyses of results.

  9. Impact of water quality on chlorine demand of corroding copper.

    PubMed

    Lytle, Darren A; Liggett, Jennifer

    2016-04-01

    Copper is widely used in drinking water premise plumbing system materials. In buildings such as hospitals, large and complicated plumbing networks make it difficult to maintain good water quality. Sustaining safe disinfectant residuals throughout a building to protect against waterborne pathogens such as Legionella is particularly challenging since copper and other reactive distribution system materials can exert considerable demands. The objective of this work was to evaluate the impact of pH and orthophosphate on the consumption of free chlorine associated with corroding copper pipes over time. A copper test-loop pilot system was used to control test conditions and systematically meet the study objectives. Chlorine consumption trends attributed to abiotic reactions with copper over time were different for each pH condition tested, and the total amount of chlorine consumed over the test runs increased with increasing pH. Orthophosphate eliminated chlorine consumption trends with elapsed time (i.e., chlorine demand was consistent across entire test runs). Orthophosphate also greatly reduced the total amount of chlorine consumed over the test runs. Interestingly, the total amount of chlorine consumed and the consumption rate were not pH dependent when orthophosphate was present. The findings reflect the complex and competing reactions at the copper pipe wall including corrosion, oxidation of Cu(I) minerals and ions, and possible oxidation of Cu(II) minerals, and the change in chlorine species all as a function of pH. The work has practical applications for maintaining chlorine residuals in premise plumbing drinking water systems including large buildings such as hospitals. Published by Elsevier Ltd.

  10. 46 CFR 53.01-3 - Adoption of section IV of the ASME Boiler and Pressure Vessel Code.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 2 2012-10-01 2012-10-01 false Adoption of section IV of the ASME Boiler and Pressure Vessel Code. 53.01-3 Section 53.01-3 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE ENGINEERING HEATING BOILERS General Requirements § 53.01-3 Adoption of section IV of the ASME Boiler and Pressure Vessel Code. (a) Heating...

  11. 46 CFR 53.01-3 - Adoption of section IV of the ASME Boiler and Pressure Vessel Code.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 2 2014-10-01 2014-10-01 false Adoption of section IV of the ASME Boiler and Pressure Vessel Code. 53.01-3 Section 53.01-3 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE ENGINEERING HEATING BOILERS General Requirements § 53.01-3 Adoption of section IV of the ASME Boiler and Pressure Vessel Code. (a) Heating...

  12. 46 CFR 52.01-2 - Adoption of section I of the ASME Boiler and Pressure Vessel Code.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 2 2011-10-01 2011-10-01 false Adoption of section I of the ASME Boiler and Pressure Vessel Code. 52.01-2 Section 52.01-2 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE ENGINEERING POWER BOILERS General Requirements § 52.01-2 Adoption of section I of the ASME Boiler and Pressure Vessel Code. (a) Main power...

  13. 46 CFR 52.01-2 - Adoption of section I of the ASME Boiler and Pressure Vessel Code.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 2 2010-10-01 2010-10-01 false Adoption of section I of the ASME Boiler and Pressure Vessel Code. 52.01-2 Section 52.01-2 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE ENGINEERING POWER BOILERS General Requirements § 52.01-2 Adoption of section I of the ASME Boiler and Pressure Vessel Code. (a) Main power...

  14. 46 CFR 53.01-3 - Adoption of section IV of the ASME Boiler and Pressure Vessel Code.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 2 2010-10-01 2010-10-01 false Adoption of section IV of the ASME Boiler and Pressure Vessel Code. 53.01-3 Section 53.01-3 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE ENGINEERING HEATING BOILERS General Requirements § 53.01-3 Adoption of section IV of the ASME Boiler and Pressure Vessel Code. (a) Heating...

  15. 46 CFR 52.01-2 - Adoption of section I of the ASME Boiler and Pressure Vessel Code.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 2 2014-10-01 2014-10-01 false Adoption of section I of the ASME Boiler and Pressure Vessel Code. 52.01-2 Section 52.01-2 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE ENGINEERING POWER BOILERS General Requirements § 52.01-2 Adoption of section I of the ASME Boiler and Pressure Vessel Code. (a) Main power...

  16. 46 CFR 53.01-3 - Adoption of section IV of the ASME Boiler and Pressure Vessel Code.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 2 2013-10-01 2013-10-01 false Adoption of section IV of the ASME Boiler and Pressure Vessel Code. 53.01-3 Section 53.01-3 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE ENGINEERING HEATING BOILERS General Requirements § 53.01-3 Adoption of section IV of the ASME Boiler and Pressure Vessel Code. (a) Heating...

  17. 46 CFR 52.01-2 - Adoption of section I of the ASME Boiler and Pressure Vessel Code.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 2 2012-10-01 2012-10-01 false Adoption of section I of the ASME Boiler and Pressure Vessel Code. 52.01-2 Section 52.01-2 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE ENGINEERING POWER BOILERS General Requirements § 52.01-2 Adoption of section I of the ASME Boiler and Pressure Vessel Code. (a) Main power...

  18. 46 CFR 52.01-2 - Adoption of section I of the ASME Boiler and Pressure Vessel Code.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 2 2013-10-01 2013-10-01 false Adoption of section I of the ASME Boiler and Pressure Vessel Code. 52.01-2 Section 52.01-2 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE ENGINEERING POWER BOILERS General Requirements § 52.01-2 Adoption of section I of the ASME Boiler and Pressure Vessel Code. (a) Main power...

  19. 46 CFR 53.01-3 - Adoption of section IV of the ASME Boiler and Pressure Vessel Code.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 2 2011-10-01 2011-10-01 false Adoption of section IV of the ASME Boiler and Pressure Vessel Code. 53.01-3 Section 53.01-3 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE ENGINEERING HEATING BOILERS General Requirements § 53.01-3 Adoption of section IV of the ASME Boiler and Pressure Vessel Code. (a) Heating...

  20. Drinking Water Quality in Hospitals and Other Buildings

    EPA Science Inventory

    Drinking water quality entering large buildings is generally adequately controlled by the water utility, but localized problems may occur within building or “premise” plumbing. Particular concerns are loss of disinfectant residual and temperature variability, which may enhance pa...

  1. PHOSPHATE CHEMICALS FOR BUILDING POTABLE WATER TREATMENT

    EPA Science Inventory

    Buildings can contribute significant quantities of trace metal contamination to drinking water, particularly lead, copper and zinc. Discolored water may also result in corroded galvanized and steel plumbing and after prolonged stagnation times. To protect human health as well as ...

  2. 24 CFR 3280.903 - General requirements for designing the structure to withstand transportation shock and vibration.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... manufactured home shall be designed, in terms of its structural, plumbing, mechanical and electrical systems... subsequent secondary transportation moves. (c) In place of an engineering analysis, either of the following...

  3. 24 CFR 3280.903 - General requirements for designing the structure to withstand transportation shock and vibration.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... manufactured home shall be designed, in terms of its structural, plumbing, mechanical and electrical systems... subsequent secondary transportation moves. (c) In place of an engineering analysis, either of the following...

  4. 24 CFR 3280.903 - General requirements for designing the structure to withstand transportation shock and vibration.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... manufactured home shall be designed, in terms of its structural, plumbing, mechanical and electrical systems... subsequent secondary transportation moves. (c) In place of an engineering analysis, either of the following...

  5. 24 CFR 3280.903 - General requirements for designing the structure to withstand transportation shock and vibration.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... manufactured home shall be designed, in terms of its structural, plumbing, mechanical and electrical systems... subsequent secondary transportation moves. (c) In place of an engineering analysis, either of the following...

  6. 10 CFR 1022.5 - Applicability.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ...) Minor modification (e.g., upgrading lighting, heating, ventilation, and air conditioning systems....g., activities such as reroofing, plumbing repair, door and window replacement); (2) Site... water and air quality, flora and fauna abundance, and soil properties) in a floodplain or wetland...

  7. 10 CFR 1022.5 - Applicability.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ...) Minor modification (e.g., upgrading lighting, heating, ventilation, and air conditioning systems....g., activities such as reroofing, plumbing repair, door and window replacement); (2) Site... water and air quality, flora and fauna abundance, and soil properties) in a floodplain or wetland...

  8. 10 CFR 1022.5 - Applicability.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ...) Minor modification (e.g., upgrading lighting, heating, ventilation, and air conditioning systems....g., activities such as reroofing, plumbing repair, door and window replacement); (2) Site... water and air quality, flora and fauna abundance, and soil properties) in a floodplain or wetland...

  9. 10 CFR 1022.5 - Applicability.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ...) Minor modification (e.g., upgrading lighting, heating, ventilation, and air conditioning systems....g., activities such as reroofing, plumbing repair, door and window replacement); (2) Site... water and air quality, flora and fauna abundance, and soil properties) in a floodplain or wetland...

  10. Advanced Technology Display House. Volume 1: Project Summary and Procedures

    NASA Technical Reports Server (NTRS)

    Maund, D. H.

    1981-01-01

    The Advanced Technology Display House (ATDH) project is described. Tasks are defined in the areas of energy demand, water demand, sewage treatment, electric power, plumbing, lighting, heating, and air conditioning. Energy, water, and sewage systems are defined.

  11. Sampling for Lead in Drinking Water

    EPA Science Inventory

    Sampling protocols for lead in water can be broadly categorized based on their intended purpose of 1) Pb regulatory compliance/corrosion control efficacy, 2) Pb plumbing source determination or Pb type identification, and 3) Pb exposure assessment. Choosing the appropriate protoc...

  12. Hazardous Waste Cleanup: American Standard Incorporated in Hamilton Township, New Jersey

    EPA Pesticide Factsheets

    American Standard Incorporated is located at 240 Princeton Avenue in Trenton, New Jersey. American Standard's Trenton Pottery Facility has operated at its present location since 1923. The facility manufactures ceramic plumbing fixtures using clay, plaster

  13. Water/Ice Heat Sink With Quick-Connect Couplings

    NASA Technical Reports Server (NTRS)

    Lomax, Curtis; Webbon, Bruce

    1996-01-01

    Report presents additional detailed information on apparatus described in "Direct-Interface, Fusible Heat Sink" (ARC-11920). Describes entire apparatus, with special emphasis on features of quick-disconnect couplings governing flow of water under various operating conditions and plumbing configuration.

  14. 75 FR 8923 - Notice of Petitions by Firms for Determination of Eligibility To Apply for Trade Adjustment...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-02-26

    .... archery repair tools and equipment. Optimax Systems, Inc 6367 Dean Parkway, Ontario, 2/17/2010 Fabrication... 60609. fittings, plumbing equipment and supplies, HVAC/Hydronic Equipment and supplies, automated valves...

  15. MOISTURE MOVEMENT (WICKING) WITHIN GYPSUM WALLBOARD

    EPA Science Inventory

    Gypsum wallboard with repeated or prolonged exposure to water or excess moisture can lose its structural integrity and provide a growth medium for biological contaminants. Poorly sealed buildings, leaking or failed plumbing systems, or improperly constructed HVAC systems can all ...

  16. Plumbing Career Ladder AFSC 552X5 and Occupational Series WG-4206.

    DTIC Science & Technology

    1987-12-01

    41 APPENDIX A ........................................................... 42 APPENDIX C ...43 Jl APPENDIX C ............................................................ o. PREFACE This report...instrument was developed by 14r William C . Cosgrove, Inventory Development Specialist, with computer programming support furnished by Ms Rebecca Hernandez

  17. Linking Surface Activity to the Deep Volcanic Plumbing System: the CALIPSO Borehole Observatory Project on Montserrat

    NASA Astrophysics Data System (ADS)

    Young, S. R.; Voight, B.; Mattioli, G. S.; Linde, A. T.; Sacks, I. S.; Malin, P. E.; Shalev, E.; Hidayat, D.; Elsworth, D.; Sparks, R. S.; Neuberg, J.; Dunkley, P. N.; Norton, G. E.; Herd, R. A.; Edmonds, M.; Thompson, G.; Jolly, A.; Bass, V.

    2003-12-01

    The prolonged and ongoing volcanic activity at SoufriŠre Hills Volcano (SHV), Montserrat, provides a rare chance for collecting multi-stream monitoring data in support of volcano research. Conventional surface geophysical instrumentation and detailed observational and geochemical data have enabled the development of a good understanding of surface and near-surface physical processes controlling eruptive style and intensity at SHV. However, the geophysical character and behavior of the deeper plumbing system, including magma storage area(s) and deep recharge processes, are not well understood. Developing better models for the deep system will assist in providing timely warning of large events or changes in eruptive style, and may also provide some clues as to the likely duration of the eruption. Installation of seismic and deformational monitoring instrumentation at depth enables a significant increase in signal to noise ratio so that smaller signals can be recorded and more distant sites (and thus deeper investigation depth) utilized. A variety of cycle-lengths have been noted during the eruption of SHV, and we hope that the new CALIPSO data stream will enable development of models in which cycles from a few hours to a few decades can be linked together in an integrated physical model. Cycle lengths of 7 to 14 weeks (depending on eruption rate and equating to the eruption of about 35 million cubic meters of magma) are likely to source from the shallower of the two upper crustal reservoirs indicated by geochemical evidence. The 30 to 35 year cycles (the fourth one of which marked the start of the current eruption) may relate to processes concerning input of basaltic magma to the deeper plumbing system. We also hope to document geophysical changes in the plumbing system induced by regional seismicity; many eastern Caribbean volcanoes (including SHV between 1933 and 1935 and in 1985) have demonstrated characteristics of unrest triggered or invigorated by regional tectonic earthquakes of Richter magnitude 5 and above. Events within the historical triggering threshold occur every few years; two such events have so far occurred since CALIPSO instrument installation (a Mw6.6 about 400km NE of Montserrat and a Mw5.7 about 150km NE of Montserrat). Both are at the lower end of historical triggering threshold parameters for magnitude and distance and neither produced measurable changes in macro-seismicity or ground deformation beneath SHV.

  18. The Vanderbilt University nanoscale science and engineering fabrication laboratory

    NASA Astrophysics Data System (ADS)

    Hmelo, Anthony B.; Belbusti, Edward F.; Smith, Mark L.; Brice, Sean J.; Wheaton, Robert F.

    2005-08-01

    Vanderbilt University has realized the design and construction of a 1635 sq. ft. Class 10,000 cleanroom facility to support the wide-ranging research mission associated with the Vanderbilt Institute for Nanoscale Science and Engineering (VINSE). By design we have brought together disparate technologies and researchers formerly dispersed across the campus to work together in a small contiguous space intended to foster interaction and synergy of nano-technologies not often found in close proximity. The space hosts a variety of tools for lithographic patterning of substrates, the deposition of thin films, the synthesis of diamond nanostructures and carbon nanotubes, and a variety of reactive ion etchers for the fabrication of nanostructures on silicon substrates. In addition, a separate 911 sq. ft. chemistry laboratory supports nanocrystal synthesis and the investigation of biomolecular films. The design criteria required an integrated space that would support the scientific agenda of the laboratory while satisfying all applicable code and safety concerns. This project required the renovation of pre-existing laboratory space with minimal disruption to ongoing activities in a mixed-use building, while meeting the requirements of the 2000 edition of the International Building Code for the variety of potentially hazardous processes that have been programmed for the space. In this paper we describe how architectural and engineering challenges were met in the areas of mitigating floor vibration issues, shielding our facility against EMI emanations, design of the contamination control facility itself, chemical storage and handling, toxic gas use and management, as well as mechanical, electrical, plumbing, lab security, fire and laboratory safety issues.

  19. User's manual for three dimensional FDTD version B code for scattering from frequency-dependent dielectric materials

    NASA Technical Reports Server (NTRS)

    Beggs, John H.; Luebbers, Raymond J.; Kunz, Karl S.

    1992-01-01

    The Penn State Finite Difference Time Domain Electromagnetic Code Version B is a three dimensional numerical electromagnetic scattering code based upon the Finite Difference Time Domain Technique (FDTD). The supplied version of the code is one version of our current three dimensional FDTD code set. This manual provides a description of the code and corresponding results for several scattering problems. The manual is organized into 14 sections: introduction, description of the FDTD method, operation, resource requirements, Version B code capabilities, a brief description of the default scattering geometry, a brief description of each subroutine, a description of the include file, a discussion of radar cross section computations, a discussion of some scattering results, a sample problem setup section, a new problem checklist, references and figure titles.

  20. [The Patient Rights Act (PatRG)--part 1: legislative procedure, treatment contract, contracting parties and their obligations to cooperate and inform].

    PubMed

    Parzeller, Markus; Zedler, Barbara

    2013-01-01

    The article deals with the new regulations in the German Civil Code (BGB) which came into effect in Germany on 26 Feb 2013 as the Patient Rights Act (PatRG). In Part I, the legislative procedure, the treatment contract and the contracting parties (Section 630a Civil Code), the applicable regulations (Section 630b Civil Code) and the obligations to cooperate and inform (Section 630c Civil Code) are discussed and critically analysed.

  1. Integrated system for production of neutronics and photonics calculational constants. Program SIGMA1 (Version 77-1): Doppler broaden evaluated cross sections in the Evaluated Nuclear Data File/Version B (ENDF/B) format

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Cullen, D.E.

    1977-01-12

    A code, SIGMA1, has been designed to Doppler broaden evaluated cross sections in the ENDF/B format. The code can only be applied to tabulated data that vary linearly in energy and cross section between tabulated points. This report describes the methods used in the code and serves as a user's guide to the code.

  2. Validation of the WIMSD4M cross-section generation code with benchmark results

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Deen, J.R.; Woodruff, W.L.; Leal, L.E.

    1995-01-01

    The WIMSD4 code has been adopted for cross-section generation in support of the Reduced Enrichment Research and Test Reactor (RERTR) program at Argonne National Laboratory (ANL). Subsequently, the code has undergone several updates, and significant improvements have been achieved. The capability of generating group-collapsed micro- or macroscopic cross sections from the ENDF/B-V library and the more recent evaluation, ENDF/B-VI, in the ISOTXS format makes the modified version of the WIMSD4 code, WIMSD4M, very attractive, not only for the RERTR program, but also for the reactor physics community. The intent of the present paper is to validate the WIMSD4M cross-section librariesmore » for reactor modeling of fresh water moderated cores. The results of calculations performed with multigroup cross-section data generated with the WIMSD4M code will be compared against experimental results. These results correspond to calculations carried out with thermal reactor benchmarks of the Oak Ridge National Laboratory (ORNL) unreflected HEU critical spheres, the TRX LEU critical experiments, and calculations of a modified Los Alamos HEU D{sub 2}O moderated benchmark critical system. The benchmark calculations were performed with the discrete-ordinates transport code, TWODANT, using WIMSD4M cross-section data. Transport calculations using the XSDRNPM module of the SCALE code system are also included. In addition to transport calculations, diffusion calculations with the DIF3D code were also carried out, since the DIF3D code is used in the RERTR program for reactor analysis and design. For completeness, Monte Carlo results of calculations performed with the VIM and MCNP codes are also presented.« less

  3. Technical Subjects. Mathematics. Science. Curriculum RP-27.

    ERIC Educational Resources Information Center

    Ontario Dept. of Education, Toronto.

    GRADES OR AGES: Grades 9-12. SUBJECT MATTER: Technical subjects and special mathematics and science courses for technical students. Technical subjects include air conditioning, auto mechanics, carpentry, drafting, applied electronics, masonry, painting, plumbing, service station operation, welding, and woodworking. ORGANIZATION AND PHYSICAL…

  4. A resolution designating March 11, 2011, as "World Plumbing Day".

    THOMAS, 112th Congress

    Sen. Bennet, Michael F. [D-CO

    2011-03-10

    Senate - 03/14/2011 Resolution agreed to in Senate without amendment and with a preamble by Unanimous Consent. (All Actions) Tracker: This bill has the status Agreed to in SenateHere are the steps for Status of Legislation:

  5. Corrosion Control 101: A Journey in Rediscovery

    EPA Science Inventory

    The presentation covers the general water chemistry of lead and copper, how contamination originates from home plumbing systems, what treatments are appropriate for controlling lead and copper to meet the Lead and Copper Rule, and what water quality and treatment factors directly...

  6. Heat-Transfer Fluids for Solar-Energy Systems

    NASA Technical Reports Server (NTRS)

    Parker, J. C.

    1982-01-01

    43-page report investigates noncorrosive heat-transport fluids compatible with both metallic and nonmetallic solar collectors and plumbing systems. Report includes tables and figures of X-ray inspections for corrosion and schematics of solar-heat transport systems and heat rejection systems.

  7. Integrated system for production of neutronics and photonics calculational constants. Volume 17, Part B, Rev. 1. Program SIGMA 1 (Version 78-1): Doppler broadened evaluated cross sections in the evaluated nuclear data file/Version B (ENDF/B) format. [For CDC-7600

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Cullen, D.E.

    1978-07-04

    The code SIGMA1 Doppler broadens evaluated cross sections in the ENDF/B format. The code can be applied only to data that vary as a linear function of energy and cross section between tabulated points. This report describes the methods used in the code and serves as a user's guide to the code. 6 figures, 2 tables.

  8. 3 CFR - Delegation of Reporting Functions Specified in Section 491 of Title 10, United State Code

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 3 The President 1 2014-01-01 2014-01-01 false Delegation of Reporting Functions Specified in Section 491 of Title 10, United State Code Presidential Documents Other Presidential Documents Memorandum of June 19, 2013 Delegation of Reporting Functions Specified in Section 491 of Title 10, United State Code Memorandum for the Secretary of Defense B...

  9. 3 CFR - Delegation of Functions and Authority Under Sections 315 and 325 of Title 32, United States Code

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 3 The President 1 2012-01-01 2012-01-01 false Delegation of Functions and Authority Under Sections 315 and 325 of Title 32, United States Code Presidential Documents Other Presidential Documents Memorandum of April 14, 2011 Delegation of Functions and Authority Under Sections 315 and 325 of Title 32, United States Code Memorandum for the...

  10. 14. Building 105, Facilities Engineering Building, 1830, interior, 1st floor, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    14. Building 105, Facilities Engineering Building, 1830, interior, 1st floor, crib area of building, showing electrical and plumbing cribs, wall and ceiling detail, looking S. - Watervliet Arsenal, Building 105, South Broadway, on Hudson River, Watervliet, Albany County, NY

  11. ION EXCHANGE SOFTENING: EFFECTS ON METAL CONCENTRATIONS

    EPA Science Inventory

    A corrosion control pipe loop study to evaluate the effect of ion exchange water softening on metal leaching from household plumbing materials was conducted on two different water qualities having different pH's and hardness levels. The results showed that removing hardness ions ...

  12. A resolution designating March 11, 2014, as "World Plumbing Day".

    THOMAS, 113th Congress

    Sen. Merkley, Jeff [D-OR

    2014-03-13

    Senate - 03/13/2014 Submitted in the Senate, considered, and agreed to without amendment and with a preamble by Unanimous Consent. (All Actions) Tracker: This bill has the status Agreed to in SenateHere are the steps for Status of Legislation:

  13. A resolution designating March 11, 2012 as "World Plumbing Day".

    THOMAS, 112th Congress

    Sen. Bennet, Michael F. [D-CO

    2012-03-08

    Senate - 03/08/2012 Submitted in the Senate, considered, and agreed to without amendment and with a preamble by Unanimous Consent. (All Actions) Tracker: This bill has the status Agreed to in SenateHere are the steps for Status of Legislation:

  14. A resolution designating March 11, 2013, as "World Plumbing Day".

    THOMAS, 113th Congress

    Sen. Bennet, Michael F. [D-CO

    2013-03-07

    Senate - 03/07/2013 Submitted in the Senate, considered, and agreed to without amendment and with a preamble by Unanimous Consent. (All Actions) Tracker: This bill has the status Agreed to in SenateHere are the steps for Status of Legislation:

  15. NON-UNIFORM COPPER CORROSION: RESEARCH UPDATE

    EPA Science Inventory

    Pinhole leaks due to copper pitting corrosion are a major cause of home plumbing failure. This study documents cases of copper pitting corrosion found in homes supplied by Butler County Environmental Services in Ohio. SEM. XRD, and optical microscopy were used to document pit s...

  16. THE CHEMISTRY OF NEW COPPER PLUMBING

    EPA Science Inventory

    The presence of sulfate, bicarbonate and orthophosphate can change the type of solid present in systems containing cupric ion or cupric hydroxide solids. In some cases, a short term reduction in copper solubility is realized, but over longer periods of time formation of basic cup...

  17. 40 CFR 142.2 - Definitions.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    .... Public water system or PWS means a system for the provision to the public of water for human consumption... piping and plumbing caused by water quality are excluded from this definition. Municipality means a city... Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) WATER PROGRAMS (CONTINUED) NATIONAL...

  18. 40 CFR 143.2 - Definitions.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... public of piped water for human consumption, if such a system has at least fifteen service connections or... corrosion of piping and plumbing caused by water quality, are excluded from this definition. [44 FR 42198... Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) WATER PROGRAMS (CONTINUED) NATIONAL...

  19. Graywater Treatment Using Constructed Wetlands

    EPA Science Inventory

    Mounting pressure to conserve water resources has prompted the notion that the separation of graywater from sewerage through the use of dual-plumbed systems may enable graywater to be reused at the household level for such non-potable demands as landscape irrigation or toilet flu...

  20. 26 CFR 1.856-3 - Definitions.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ..., the wiring in a building, plumbing systems, central heating, or central air-conditioning machinery, pipes or ducts, elevators or escalators installed in the building, or other items which are structural... operation of a business, such as machinery, printing press, transportation equipment which is not a...

  1. 26 CFR 1.856-3 - Definitions.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ..., the wiring in a building, plumbing systems, central heating, or central air-conditioning machinery, pipes or ducts, elevators or escalators installed in the building, or other items which are structural... operation of a business, such as machinery, printing press, transportation equipment which is not a...

  2. 26 CFR 1.856-3 - Definitions.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ..., the wiring in a building, plumbing systems, central heating, or central air-conditioning machinery, pipes or ducts, elevators or escalators installed in the building, or other items which are structural... operation of a business, such as machinery, printing press, transportation equipment which is not a...

  3. 26 CFR 1.856-3 - Definitions.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ..., the wiring in a building, plumbing systems, central heating, or central air-conditioning machinery, pipes or ducts, elevators or escalators installed in the building, or other items which are structural... operation of a business, such as machinery, printing press, transportation equipment which is not a...

  4. Ground Truthing the 'Conventional Wisdom' of Lead Corrosion Control Using Mineralogical Analysis

    EPA Science Inventory

    For drinking water distribution systems (DWDS) with lead-bearing plumbing materials some form of corrosion control is typically necessary, with the goal of mitigating lead release by forming adherent, stable corrosion scales composed of low-solubility mineral phases. Conventional...

  5. Diagnostic Sampling to Reveal Hidden Lead and Copper Health Risks

    EPA Science Inventory

    Lead, copper and other metallic contamination sources in premise drinking water plumbing systems, are unevenly distributed and are usually hidden from thought, view, or both. Many sampling protocols exist, each with some set of implicit assumptions governing its applicability to...

  6. 76 FR 37034 - Certain Employee Remuneration in Excess of $1,000,000 Under Internal Revenue Code Section 162(m)

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-06-24

    ... Certain Employee Remuneration in Excess of $1,000,000 Under Internal Revenue Code Section 162(m) AGENCY... remuneration in excess of $1,000,000 under the Internal Revenue Code (Code). The proposed regulations clarify... stock options, it is intended that the directors may retain discretion as to the exact number of options...

  7. The Bauschinger Effect in Autofrettaged Tubes- A Comparison of Models Including the ASME Code

    DTIC Science & Technology

    1998-06-01

    possible error in Division 3 of Section Vm of the ASME Boiler and Pressure Vessel Code . They show that the empirical method used in the code to...Discussion presented by DP Kendall We appreciate the acknowledgement in the Kendall discussion that Division 3 of Section VIII of the ASME Boiler and Pressure Vessel Code may

  8. Subterranean fragmentation of magma during conduit initiation and evolution in the shallow plumbing system of the small-volume Jagged Rocks volcanoes (Hopi Buttes Volcanic Field, Arizona, USA)

    NASA Astrophysics Data System (ADS)

    Re, Giuseppe; White, James D. L.; Muirhead, James D.; Ort, Michael H.

    2016-08-01

    Monogenetic volcanoes have limited magma supply and lack long-lived sustained magma plumbing systems. They erupt once, often from multiple vents and sometimes over several years, and are rarely or never re-activated. Eruptive behavior is very sensitive to physical processes (e.g., volatile exsolution, magma-water interaction) occurring in the later stages of magma ascent at shallow crustal depths (<1 km), which yield a spectrum of eruptive styles including weak to moderate explosive activity, violent phreatomagmatism, and lava effusion. Jagged Rocks Complex in the late Miocene Hopi Buttes Volcanic field (Arizona, USA) exposes the frozen remnants of the feeding systems for one or a few monogenetic volcanoes. It provides information on how a shallow magmatic plumbing system evolved within a stable non-marine sedimentary basin, and the processes by which magma flowing through dikes fragmented and conduits were formed. We have identified three main types of fragmental deposits, (1) buds (which emerge from dikes), (2) pyroclastic massifs, and (3) diatremes; these represent three different styles and intensities of shallow-depth magma fragmentation. They may develop successively and at different sites during the evolution of a monogenetic volcano. The deposits consist of a mixture of pyroclasts with varying degrees of welding and country-rock debris in various proportions. Pyroclasts are commonly welded together, but also reveal in places features consistent with phreatomagmatism, such as blocky shapes, dense groundmasses, and composite clasts (loaded and cored). The extent of fragmentation and the formation of subterranean open space controlled the nature of the particles and the architecture and geometry of these conduit structures and their deposits.

  9. Integration of Pseudomonas aeruginosa and Legionella pneumophila in drinking water biofilms grown on domestic plumbing materials.

    PubMed

    Moritz, Miriam M; Flemming, Hans-Curt; Wingender, Jost

    2010-06-01

    Drinking water biofilms were grown on coupons of plumbing materials, including ethylene-propylene-diene-monomer (EPDM) rubber, silane cross-linked polyethylene (PE-X b), electron-ray cross-linked PE (PE-X c) and copper under constant flow-through of cold tap water. After 14 days, the biofilms were spiked with Pseudomonas aeruginosa, Legionella pneumophila and Enterobacter nimipressuralis (10(6) cells/mL each). The test bacteria were environmental isolates from contamination events in drinking water systems. After static incubation for 24 h, water flow was resumed and continued for 4 weeks. Total cell count and heterotrophic plate count (HPC) of biofilms were monitored, and P. aeruginosa, L. pneumophila and E. nimipressuralis were quantified, using standard culture-based methods or culture-independent fluorescence in situ hybridization (FISH). After 14 days total cell counts and HPC values were highest on EPDM followed by the plastic materials and copper. P. aeruginosa and L. pneumophila became incorporated into drinking water biofilms and were capable to persist in biofilms on EPDM and PE-X materials for several weeks, while copper biofilms were colonized only by L. pneumophila in low culturable numbers. E. nimipressuralis was not detected in any of the biofilms. Application of the FISH method often yielded orders of magnitude higher levels of P. aeruginosa and L. pneumophila than culture methods. These observations indicate that drinking water biofilms grown under cold water conditions on domestic plumbing materials, especially EPDM and PE-X in the present study, can be a reservoir for P. aeruginosa and L. pneumophila that persist in these habitats mostly in a viable but non-culturable state.

  10. Biofilms in shower hoses.

    PubMed

    Proctor, Caitlin R; Reimann, Mauro; Vriens, Bas; Hammes, Frederik

    2017-12-14

    Shower hoses offer an excellent bacterial growth environment in close proximity to a critical end-user exposure route within building drinking water plumbing. However, the health risks associated with and processes underlying the development of biofilms in shower hoses are poorly studied. In a global survey, biofilms from 78 shower hoses from 11 countries were characterized in terms of cell concentration (4.1 × 10 4 -5.8 × 10 8  cells/cm 2 ), metal accumulation (including iron, lead, and copper), and microbiome composition (including presence of potential opportunistic pathogens). In countries using disinfectant, biofilms had on average lower cell concentrations and diversity. Metal accumulation (up to 5 μg-Fe/cm 2 , 75 ng-Pb/cm 2 , and 460 ng-Cu/cm 2 ) seemed to be partially responsible for discoloration in biofilms, and likely originated from other pipes upstream in the building. While some genera that may contain potential opportunistic pathogens (Legionella, detected in 21/78 shower hoses) were positively correlated with biofilm cell concentration, others (Mycobacterium, Pseudomonas) had surprisingly non-existent or negative correlations with biofilm cell concentrations. In a controlled study, 15 identical shower hoses were installed for the same time period in the same country, and both stagnant and flowing water samples were collected. Ecological theory of dispersal and selection helped to explain microbiome composition and diversity of different sample types. Shower hose age was related to metal accumulation but not biofilm cell concentration, while frequency of use appeared to influence biofilm cell concentration. This study shows that shower hose biofilms are clearly a critical element of building drinking water plumbing, and a potential target for building drinking water plumbing monitoring. Copyright © 2017 Elsevier Ltd. All rights reserved.

  11. Video monitoring of the persistent strombolian activity of Stromboli volcano represents a window on its plumbing system and an opportunity for understanding the eruptive processes

    NASA Astrophysics Data System (ADS)

    Coltelli, Mauro; Biale, Emilio; Ciancitto, Francesco; Pecora, Emilio; Prestifilippo, Michele

    2014-05-01

    Since 1994 a video-surveillance camera located on a peak just above the active volcanic vents of Stromboli island records the explosive activity of one of the few volcanoes on the world performing a persistent eruptive activity. From 2003, after one of the larger lava flow eruption of the last century, the video-surveillance system was enhanced with more stations having both thermal and visual cameras. The video-surveillance helps volcanologists to characterize the mild explosive activity of Stromboli named Strombolian and to distinguish between the frequent "ordinary" Strombolian explosions and the occasional "extraordinary" strong Strombolian explosions that periodically occur. A new class of extraordinary explosions was discovered filling the gap between the ordinary activity and the strong explosions named major explosions when the tephra fallout covers large areas on the volcano summit and paroxysmal ones when the bombs fall down to the inhabited area along the coast of the island. In order to quantify the trend of the ordinary Strombolian explosions and to understand the occurring of the extraordinary strong Strombolian explosions a computer assisted image analysis was developed to process the huge amount of thermal and visual images recorded in several years. The results of this complex analysis allow us to clarify the processes occurring in the upper plumbing system where the pockets/trains of bubbles coalesce and move into the active vent conduits producing the ordinary Strombolian activity, and to infer the process into the deeper part of the plumbing system where new magma supply and its evolution lead to the formation of the extraordinary strong Strombolian explosions.

  12. Subsurface architecture of a strike-slip collapse structure: insights from Ilopango caldera, El Salvador

    NASA Astrophysics Data System (ADS)

    Saxby, Jennifer; Gottsmann, Joachim; Cashman, Katherine; Gutierrez, Eduardo

    2016-04-01

    While most calderas are created by roof collapse along ring-like faults into an emptying magma reservoir during a large and violent explosive eruption, an additional condition for caldera formation may be tectonically induced extensional stresses. Here we provide geophysical insights into the shallow sub-volcanic plumbing system of a collapse caldera in a major strike-slip tectonic setting by inverting Bouguer gravity data from the Ilopango caldera in El Salvador. Despite a long history of catastrophic eruptions with the most recent in 500 A.D., the internal architecture of the caldera has not been investigated, although studies of the most recent eruption have not identified the ring faults commonly associated with caldera collapse. The gravity data show that low-density material aligned along the principal stress orientations of the El Salvador Fault Zone (ESFZ) forms a pronounced gravity low beneath the caldera. Extending to around 6 km depth, the low density structure likely maps a complex stacked shallow plumbing system composed of magmatic and fractured hydrothermal reservoirs. A substantial volume of the plumbing system must be composed of a vapour phase to explain the modeled negative density contrasts. We use these constraints to map the possible multi-phase parameter space contributing to the subsurface architecture of the caldera and propose that the local extension along the complex ESFZ controls accumulation, ascent and eruption of magma at Ilopango. The data further suggest that future eruptions at Ilopango could be facilitated by rapid rise of magma along conjugate fault damage zones through a mechanically weak crust under tension. This may explain the absence of clear ring fault structures at the caldera.

  13. Effects of phosphate addition on biofilm bacterial communities and water quality in annular reactors equipped with stainless steel and ductile cast iron pipes.

    PubMed

    Jang, Hyun-Jung; Choi, Young-June; Ro, Hee-Myong; Ka, Jong-Ok

    2012-02-01

    The impact of orthophosphate addition on biofilm formation and water quality was studied in corrosion-resistant stainless steel (STS) pipe and corrosion-susceptible ductile cast iron (DCI) pipe using cultivation and culture-independent approaches. Sample coupons of DCI pipe and STS pipe were installed in annular reactors, which were operated for 9 months under hydraulic conditions similar to a domestic plumbing system. Addition of 5 mg/L of phosphate to the plumbing systems, under low residual chlorine conditions, promoted a more significant growth of biofilm and led to a greater rate reduction of disinfection by-products in DCI pipe than in STS pipe. While the level of THMs (trihalomethanes) increased under conditions of low biofilm concentration, the levels of HAAs (halo acetic acids) and CH (chloral hydrate) decreased in all cases in proportion to the amount of biofilm. It was also observed that chloroform, the main species of THM, was not readily decomposed biologically and decomposition was not proportional to the biofilm concentration; however, it was easily biodegraded after the addition of phosphate. Analysis of the 16S rDNA sequences of 102 biofilm isolates revealed that Proteobacteria (50%) was the most frequently detected phylum, followed by Firmicutes (10%) and Actinobacteria (2%), with 37% of the bacteria unclassified. Bradyrhizobium was the dominant genus on corroded DCI pipe, while Sphingomonas was predominant on non-corroded STS pipe. Methylobacterium and Afipia were detected only in the reactor without added phosphate. PCR-DGGE analysis showed that the diversity of species in biofilm tended to increase when phosphate was added regardless of the pipe material, indicating that phosphate addition upset the biological stability in the plumbing systems.

  14. Resonance oscillations of the Soufrière Hills Volcano (Montserrat, W.I.) magmatic system induced by forced magma flow from the reservoir into the upper plumbing dike

    NASA Astrophysics Data System (ADS)

    Chen, Chin-Wu; Huang, Hsin-Fu; Hautmann, Stefanie; Sacks, I. Selwyn; Linde, Alan T.; Taira, Taka'aki

    2018-01-01

    Short-period deformation cycles are a common phenomenon at active volcanoes and are often attributed to the instability of magma flow in the upper plumbing system caused by fluctuations in magma viscosity related to cooling, degassing, and crystallization. Here we present 20-min periodic oscillations in ground deformation based on high-precision continuous borehole strain data that were associated with the 2003 massive dome-collapse at the Soufrière Hills Volcano, Montserrat (West Indies). These high-frequency oscillations lasted 80 min and were preceded by a 4-hour episode of rapid expansion of the shallow magma reservoir. Strain amplitude ratios indicate that the deformational changes were generated by pressure variations in the shallow magma reservoir and - with reversed polarity - the adjacent plumbing dike. The unusually short period of the oscillations cannot be explained with thermally induced variations in magma properties. We investigate the underlying mechanism of the oscillations via a numerical model of forced magma flow through a reservoir-dike system accounting for time-dependent dilation/contraction of the dike due to a viscous response in the surrounding host rock. Our results suggest that the cyclic pressure variations are modulated by the dynamical interplay between rapid expansion of the magma chamber and the incapacity of the narrow dike to take up fast enough the magma volumes supplied by the reservoir. Our results allow us to place first order constraints on the viscosity of crustal host rocks and consequently its fractional melt content. Hence, we present for the first time crustal-scale in situ measurements of rheological properties of mush zones surrounding magmatic systems.

  15. Geographic Information Systems using CODES linked data (Crash outcome data evaluation system)

    DOT National Transportation Integrated Search

    2001-04-01

    This report presents information about geographic information systems (GIS) and CODES linked data. Section one provides an overview of a GIS and the benefits of linking to CODES. Section two outlines the basic issues relative to the types of map data...

  16. User's manual for three dimensional FDTD version D code for scattering from frequency-dependent dielectric and magnetic materials

    NASA Technical Reports Server (NTRS)

    Beggs, John H.; Luebbers, Raymond J.; Kunz, Karl S.

    1992-01-01

    The Penn State Finite Difference Time Domain Electromagnetic Scattering Code version D is a 3-D numerical electromagnetic scattering code based upon the finite difference time domain technique (FDTD). The manual provides a description of the code and corresponding results for several scattering problems. The manual is organized into 14 sections: introduction; description of the FDTD method; operation; resource requirements; version D code capabilities; a brief description of the default scattering geometry; a brief description of each subroutine; a description of the include file; a section briefly discussing Radar Cross Section computations; a section discussing some scattering results; a sample problem setup section; a new problem checklist; references and figure titles. The FDTD technique models transient electromagnetic scattering and interactions with objects of arbitrary shape and/or material composition. In the FDTD method, Maxwell's curl equations are discretized in time-space and all derivatives (temporal and spatial) are approximated by central differences.

  17. 26 CFR 301.9100-19T - Election relating to passive investment income of electing small business corporations.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 14, 1966 (Pub. L. 89-389) amends section 1372(e)(5) of the Internal Revenue Code of 1954 (relating to... section 1372(e)(5) of the Internal Revenue Code, as amended by Pub. L. 89-389, with respect to its taxable... section 1372(e)(5) of the Code prior to the enactment of Pub. L. 89-389. Therefore, notwithstanding the...

  18. 26 CFR 301.9100-19T - Election relating to passive investment income of electing small business corporations.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 14, 1966 (Pub. L. 89-389) amends section 1372(e)(5) of the Internal Revenue Code of 1954 (relating to... section 1372(e)(5) of the Internal Revenue Code, as amended by Pub. L. 89-389, with respect to its taxable... section 1372(e)(5) of the Code prior to the enactment of Pub. L. 89-389. Therefore, notwithstanding the...

  19. 29 CFR 4001.2 - Definitions.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 29 Labor 9 2011-07-01 2011-07-01 false Definitions. 4001.2 Section 4001.2 Labor Regulations Relating to Labor (Continued) PENSION BENEFIT GUARANTY CORPORATION GENERAL TERMINOLOGY § 4001.2 Definitions... section 401(a)(2) of the Code). Code means the Internal Revenue Code of 1986, as amended. Complete...

  20. KNOWING CHEMISTRY CAN HELP GET THE LEAD OUT

    EPA Science Inventory

    Lead in tap water comes from the materials used in plumbing such as from leaded solder, lead pipe, and lead-containing brass found in fittings and faucets. Fortunately, the surface of brass eventually becomes passivated when in contact with most waters. Oxidants in water (usually...

  1. Using Less, Staying Clean.

    ERIC Educational Resources Information Center

    Jahrling, Peter

    2002-01-01

    With careful layout and improved equipment, schools can enhance security and improve hygiene in their restrooms by installing products such as low-consumption, pressure-assist toilets (to reduce water consumption); sensor-operated plumbing fixtures (to improve hygiene and reduce vandalism); and automated-control systems (to regulate timing,…

  2. COPPER PITTING CORROSION: A CASE STUDY

    EPA Science Inventory

    Localized or pitting corrosion of copper pipes used in household drinking-water plumbing is a problem for many water utilities and their customers. Extreme attack can lead to pinhole water leaks that may result in water damage, mold growth, and costly repairs. Water quality has b...

  3. Standardized Curriculum for Building Trades.

    ERIC Educational Resources Information Center

    Mississippi State Dept. of Education, Jackson. Office of Vocational, Technical and Adult Education.

    Standardized curricula are provided for two courses for the secondary vocational education program in Mississippi: building trades I and II. The eight units in building trades I are as follows: safety; measurement; tools, equipment, and hardware; building plans and blueprints; introduction to carpentry; introduction to plumbing; introduction to…

  4. 24 CFR 3280.602 - Definitions.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... opening of a door. Air gap (water distribution system) means the unobstructed vertical distance through the free atmosphere between the lowest opening from any pipe or faucet supplying water to a tank, plumbing fixture, water supplied appliances, or other device and the flood level rim of the receptacle...

  5. 24 CFR 3280.602 - Definitions.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... opening of a door. Air gap (water distribution system) means the unobstructed vertical distance through the free atmosphere between the lowest opening from any pipe or faucet supplying water to a tank, plumbing fixture, water supplied appliances, or other device and the flood level rim of the receptacle...

  6. Words in Action: Rethinking Workplace Literacy.

    ERIC Educational Resources Information Center

    Rose, Mike

    2003-01-01

    Discusses a research project exploring the thought it takes to do physical work, the cognitive processes involved in various blue collar and service occupations like waitressing, hairstyling, plumbing, welding, industrial assembly, and the like. Considers the way occupations are categorized, defines intelligence, and thinks about learning and…

  7. Lead Sampling Protocols: Why So Many and What Do They Tell You?

    EPA Science Inventory

    Sampling protocols can be broadly categorized based on their intended purpose of 1) Pb regulatory compliance/corrosion control efficacy, 2) Pb plumbing source determination or Pb type identification, and 3) Pb exposure assessment. Choosing the appropriate protocol is crucial to p...

  8. POTENTIAL EFFECTS OF PHOSPHATE PRODUCTS ON LEAD SOLUBILITY IN PLUMBING SYSTEMS

    EPA Science Inventory

    Lead concentrations in drinking water can be minimized by adjusting the pH and alkalinity. Such lead solubility controls, however, may be offset by other water treatment measures that inadvertently increase lead solubility, e.g., the adding of polyphosphate-containing products. ...

  9. Get It Together

    ERIC Educational Resources Information Center

    Coffey, Dave

    2006-01-01

    The scale of the mechanical and plumbing systems required to support a large, multi-building academic health sciences/research center entails a lot of ductwork. Getting mechanical systems installed and running while carrying out activities from other building disciplines requires a great deal of coordinated effort. A university and its…

  10. 20. INTERIOR OF UTILITY ROOM SHOWING OPEN DOORWAY TO KITCHEN ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    20. INTERIOR OF UTILITY ROOM SHOWING OPEN DOORWAY TO KITCHEN AT PHOTO LEFT, JUNCTION BOXES AT UPPER PHOTO CENTER, AND PLUMBING FOR WASHER AT PHOTO RIGHT. VIEW TO EAST. - Bishop Creek Hydroelectric System, Plant 4, Worker Cottage, Bishop Creek, Bishop, Inyo County, CA

  11. High and Dry

    ERIC Educational Resources Information Center

    Johnson, Robert L.

    2005-01-01

    High-performance schools are facilities that improve the learning environment while saving energy, resources and money. Creating a high-performance school requires an integrated design approach. Key systems--including lighting, HVAC, electrical and plumbing--must be considered from the beginning of the design process. According to William H.…

  12. 24 CFR 3280.607 - Plumbing fixtures.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... two or more compartments, dishwashers, clothes washing machines, laundry tubs, bath tubs, and not less... for Safety Performance Specifications and Methods of Test for Safety Glazing Materials Used in...) Dishwashing machines. (i) A dishwashing machine shall not be directly connected to any waste piping, but shall...

  13. 38 CFR 36.4365 - Appraisal requirements.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... statement must also give an estimate of the expected useful life of the roof, elevators, heating and cooling, plumbing and electrical systems assuming normal maintenance. A minimum of 10 years estimated remaining... operation of offsite facilities—(1) Title requirements. Evidence must be presented that the offsite facility...

  14. 38 CFR 36.4365 - Appraisal requirements.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... statement must also give an estimate of the expected useful life of the roof, elevators, heating and cooling, plumbing and electrical systems assuming normal maintenance. A minimum of 10 years estimated remaining... operation of offsite facilities—(1) Title requirements. Evidence must be presented that the offsite facility...

  15. 38 CFR 36.4365 - Appraisal requirements.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... statement must also give an estimate of the expected useful life of the roof, elevators, heating and cooling, plumbing and electrical systems assuming normal maintenance. A minimum of 10 years estimated remaining... operation of offsite facilities—(1) Title requirements. Evidence must be presented that the offsite facility...

  16. 38 CFR 36.4365 - Appraisal requirements.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... statement must also give an estimate of the expected useful life of the roof, elevators, heating and cooling, plumbing and electrical systems assuming normal maintenance. A minimum of 10 years estimated remaining... operation of offsite facilities—(1) Title requirements. Evidence must be presented that the offsite facility...

  17. APPLICATION OF EPANET TO UNDERSTAND LEAD ...

    EPA Pesticide Factsheets

    This presentation describes the factors affecting lead concentration in tap water using an EPANET hydraulic model for a simplified home model, a realistic home model, and EPA's experimental home plumbing system. This presentation describes the factors affecting lead concentration in tap water using an EPANET hydraulic model.

  18. Ground Truthing the ‘Conventional Wisdom’ of Lead Corrosion Control Using Mineralogical Analysis

    EPA Science Inventory

    For drinking water distribution systems (DWDS) with lead-bearing plumbing materials some form of corrosion control is typically necessary, with the goal of mitigating lead release by forming adherent, stable corrosion scales composed of low-solubility mineral phases. Conventional...

  19. Hospitalizations due to selected infections caused by opportunistic premise plumbing pathogens (OPPP) and reported drug resistance in the United States older adult population in 1991-2006.

    PubMed

    Naumova, Elena N; Liss, Alexander; Jagai, Jyotsna S; Behlau, Irmgard; Griffiths, Jeffrey K

    2016-12-01

    The Flint Water Crisis-due to changes of water source and treatment procedures-has revealed many unsolved social, environmental, and public health problems for US drinking water, including opportunistic premise plumbing pathogens (OPPP). The true health impact of OPPP, especially in vulnerable populations such as the elderly, is largely unknown. We explored 10 8 claims in the largest US national uniformly collected data repository to determine rates and costs of OPPP-related hospitalizations. In 1991-2006, 617,291 cases of three selected OPPP infections resulted in the elderly alone of $0.6 billion USD per year of payments. Antibiotic resistance significantly increased OPPP illness costs that are likely to be underreported. More precise estimates for OPPP burdens could be obtained if better clinical, microbiological, administrative, and environmental monitoring data were cross-linked. An urgent dialog across governmental and disciplinary divides, and studies on preventing OPPP through drinking water exposure, are warranted.

  20. Lava flow-field morphology: A case study from Mount Etna, Sicily

    NASA Technical Reports Server (NTRS)

    Guest, J. E.; Hughes, J. W.; Duncan, A. M.

    1987-01-01

    The morphology of lava flows is often taken as an indicator of the broad chemical composition of the lava, especially when interpreting extraterrestrial volcanoes using spacecraft images. The historical lavas of the active volcano Mount Etna in Sicily provide an excellent opportunity to examine the controls on flow field morphology. In this study only flow produced by flank eruptions after the middle of the 18th century are examined. The final form of a flow-field may be more indicative of the internal plumbing of the volcano, which may control such factors as the effusion, rate, duration of eruption, volume of available magma, rate of de-gassing, and lava rheology. Different flow morphologies on Etna appear to be a good indicator of differing conditions within the volcanic pile. Thus the spatial distribution of different flow types on an extraterrestrial volcano may provide useful information about the plumbing conditions of that volcano, rather than necessarily providing information on the composition of materials erupted.

  1. Locating the depth of magma supply for volcanic eruptions, insights from Mt. Cameroon

    PubMed Central

    Geiger, Harri; Barker, Abigail K.; Troll, Valentin R.

    2016-01-01

    Mt. Cameroon is one of the most active volcanoes in Africa and poses a possible threat to about half a million people in the area, yet knowledge of the volcano’s underlying magma supply system is sparse. To characterize Mt. Cameroon’s magma plumbing system, we employed mineral-melt equilibrium thermobarometry on the products of the volcano’s two most recent eruptions of 1999 and 2000. Our results suggest pre-eruptive magma storage between 20 and 39 km beneath Mt. Cameroon, which corresponds to the Moho level and below. Additionally, the 1999 eruption products reveal several shallow magma pockets between 3 and 12 km depth, which are not detected in the 2000 lavas. This implies that small-volume magma batches actively migrate through the plumbing system during repose intervals. Evolving and migrating magma parcels potentially cause temporary unrest and short-lived explosive outbursts, and may be remobilized during major eruptions that are fed from sub-Moho magma reservoirs. PMID:27713494

  2. Geophysical Investigations of Magma Plumbing Systems at Cerro Negro Volcano, Nicaragua

    NASA Astrophysics Data System (ADS)

    MacQueen, Patricia Grace

    Cerro Negro near Leon, Nicaragua is a very young (163 years), relatively small basaltic cinder cone volcano that has been unusually active during its short lifespan (recurrence interval 6--7 years), presenting a significant hazard to nearby communities. Previous studies have raised several questions as to the proper classification of Cerro Negro and its relation to neighboring Las Pilas-El Hoyo volcano. Analysis of Bouguer gravity data collected at Cerro Negro has revealed connected positive density anomalies beneath Cerro Negro and Las Pilas-El Hoyo. These findings suggest that eruptions at Cerro Negro may be tapping a large magma reservoir beneath Las Pilas-El Hoyo, implying that Cerro Negro should be considered the newest vent on the Las Pilas-El Hoyo volcanic complex. As such, it is possible that the intensity of volcanic hazards at Cerro Negro may eventually increase in the future to resemble those pertaining to a stratovolcano. Keywords: Cerro Negro; Las Pilas-El Hoyo; Bouguer gravity; magmatic plumbing systems; potential fields; volcano.

  3. Locating the depth of magma supply for volcanic eruptions, insights from Mt. Cameroon.

    PubMed

    Geiger, Harri; Barker, Abigail K; Troll, Valentin R

    2016-10-07

    Mt. Cameroon is one of the most active volcanoes in Africa and poses a possible threat to about half a million people in the area, yet knowledge of the volcano's underlying magma supply system is sparse. To characterize Mt. Cameroon's magma plumbing system, we employed mineral-melt equilibrium thermobarometry on the products of the volcano's two most recent eruptions of 1999 and 2000. Our results suggest pre-eruptive magma storage between 20 and 39 km beneath Mt. Cameroon, which corresponds to the Moho level and below. Additionally, the 1999 eruption products reveal several shallow magma pockets between 3 and 12 km depth, which are not detected in the 2000 lavas. This implies that small-volume magma batches actively migrate through the plumbing system during repose intervals. Evolving and migrating magma parcels potentially cause temporary unrest and short-lived explosive outbursts, and may be remobilized during major eruptions that are fed from sub-Moho magma reservoirs.

  4. Surveillance for Waterborne Disease Outbreaks Associated with Drinking Water - United States, 2011-2012.

    PubMed

    Beer, Karlyn D; Gargano, Julia W; Roberts, Virginia A; Hill, Vincent R; Garrison, Laurel E; Kutty, Preeta K; Hilborn, Elizabeth D; Wade, Timothy J; Fullerton, Kathleen E; Yoder, Jonathan S

    2015-08-14

    Advances in water management and sanitation have substantially reduced waterborne disease in the United States, although outbreaks continue to occur. Public health agencies in the U.S. states and territories* report information on waterborne disease outbreaks to the CDC Waterborne Disease and Outbreak Surveillance System (http://www.cdc.gov/healthywater/surveillance/index.html). For 2011-2012, 32 drinking water-associated outbreaks were reported, accounting for at least 431 cases of illness, 102 hospitalizations, and 14 deaths. Legionella was responsible for 66% of outbreaks and 26% of illnesses, and viruses and non-Legionella bacteria together accounted for 16% of outbreaks and 53% of illnesses. The two most commonly identified deficiencies† leading to drinking water-associated outbreaks were Legionella in building plumbing§ systems (66%) and untreated groundwater (13%). Continued vigilance by public health, regulatory, and industry professionals to identify and correct deficiencies associated with building plumbing systems and groundwater systems could prevent most reported outbreaks and illnesses associated with drinking water systems.

  5. Homosexual Cohabitees Act, 18 June 1987.

    PubMed

    1989-01-01

    The purpose of this Act is to place homosexual cohabitees in the same legal position as heterosexual cohabitees. It provides that if 2 persons are living together in a homosexual relationship, the following legal provisions relating to cohabitation shall apply to them: 1) the Cohabitees (Joint Homes) Act (1987:232), 2) the Inheritance Code, 3) the Real Property Code, 4) Chapter 10, section 9, of the Code of Judicial Procedure, 5) Chapter 4, section 19, 1st paragraph, of the Code of Execution, 6) section 19, 1st paragraph, section 35, subsection 4, and point 2a, 7th paragraph, of the regulations relating to Section 36 of the Municipal Tax Act (1928:370), 7) the Inheritance and Gift Taxes Act (1941:416), 8) Section 6 of the Court Procedures (Miscellaneous Business) Act (1946:807), 9) the Tenant Owner Act (1971:479), 10) section 10 of the Legal Aid Act (1972:429), and 11) the Notice to Unknown Creditors Act (1981:131).

  6. Bistatic radar cross section of a perfectly conducting rhombus-shaped flat plate

    NASA Astrophysics Data System (ADS)

    Fenn, Alan J.

    1990-05-01

    The bistatic radar cross section of a perfectly conducting flat plate that has a rhombus shape (equilateral parallelogram) is investigated. The Ohio State University electromagnetic surface patch code (ESP version 4) is used to compute the theoretical bistatic radar cross section of a 35- x 27-in rhombus plate at 1.3 GHz over the bistatic angles 15 deg to 142 deg. The ESP-4 computer code is a method of moments FORTRAN-77 program which can analyze general configurations of plates and wires. This code has been installed and modified at Lincoln Laboratory on a SUN 3 computer network. Details of the code modifications are described. Comparisons of the method of moments simulations and measurements of the rhombus plate are made. It is shown that the ESP-4 computer code provides a high degree of accuracy in the calculation of copolarized and cross-polarized bistatic radar cross section patterns.

  7. Modification and benchmarking of MCNP for low-energy tungsten spectra.

    PubMed

    Mercier, J R; Kopp, D T; McDavid, W D; Dove, S B; Lancaster, J L; Tucker, D M

    2000-12-01

    The MCNP Monte Carlo radiation transport code was modified for diagnostic medical physics applications. In particular, the modified code was thoroughly benchmarked for the production of polychromatic tungsten x-ray spectra in the 30-150 kV range. Validating the modified code for coupled electron-photon transport with benchmark spectra was supplemented with independent electron-only and photon-only transport benchmarks. Major revisions to the code included the proper treatment of characteristic K x-ray production and scoring, new impact ionization cross sections, and new bremsstrahlung cross sections. Minor revisions included updated photon cross sections, electron-electron bremsstrahlung production, and K x-ray yield. The modified MCNP code is benchmarked to electron backscatter factors, x-ray spectra production, and primary and scatter photon transport.

  8. 24 CFR 3280.608 - Hangers and supports.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... Hangers and supports. (a) Strains and stresses. Piping in a plumbing system shall be installed without undue strains and stresses, and provision shall be made for expansion, contraction, and structural..., plastic drainage piping shall be supported at intervals not to exceed 4 feet and plastic water piping...

  9. 24 CFR 3280.608 - Hangers and supports.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... Hangers and supports. (a) Strains and stresses. Piping in a plumbing system shall be installed without undue strains and stresses, and provision shall be made for expansion, contraction, and structural..., plastic drainage piping shall be supported at intervals not to exceed 4 feet and plastic water piping...

  10. Residential Solar Systems.

    ERIC Educational Resources Information Center

    Fulkerson, Dan

    This publication contains student and teacher instructional materials for a course in residential solar systems. The text is designed either as a basic solar course or as a supplement to extend student skills in areas such as architectural drafting, air conditioning and refrigeration, and plumbing. The materials are presented in four units…

  11. 49 CFR 192.16 - Customer notification.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... serve yard lanterns, pool heaters, or other types of secondary equipment. Also, “maintain” means monitor... notify each customer once in writing of the following information: (1) The operator does not maintain the... in advance, and the excavation done by hand. (5) The operator (if applicable), plumbing contractors...

  12. 24 CFR 3280.602 - Definitions.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... the free atmosphere between the lowest opening from any pipe or faucet supplying water to a tank, plumbing fixture, water supplied appliances, or other device and the flood level rim of the receptacle... other liquids, mixtures, or substances into the distributing pipes of a potable supply of water from any...

  13. CALIFORNIA'S FIRST AERATION PLANTS FOR CORROSION CONTROL

    EPA Science Inventory

    As required by the Lead and Copper Rule (LCR), Idyllwild Water District (IWD) and Pine Cove Water District (PCWD) conducted a sampling and testing program in 1993-1994. The program began with an evaluation of local household plumbing to identify 20 sites in each District which wo...

  14. A SIMPLE APPROACH TO ASSESSING COPPER PITTING CORROSION TENDENCIES AND DEVELOPING CONTROL STRATEGIES

    EPA Science Inventory

    Localized corrosion of copper premise plumbing in drinking water distribution systems can lead to pinhole leaks, which are a growing problem for many homeowners. Despite the fact that water quality is an important factor associated with localized copper corrosion, definitive appr...

  15. Release Mechanisms, Control Strategies, and Implementation Challenges of Controlling Lead in Drinking Water

    EPA Science Inventory

    Even minimally or moderately corrosive water can cause unacceptable and dangerous lead contamination to be released from common plumbing materials and devices into drinking water. Designing sampling programs to uncover the potential for ingestion of lead in water and to protect ...

  16. Adult Education Research Annual Conference (AERC) Proceedings (34th, University Park, Pennsylvania, May 1993).

    ERIC Educational Resources Information Center

    Flannery, Daniele, Ed.

    Among the papers included are the following: "Exploring Literacy through Theater" (Andruske); "Heuristic Research" (Beckstrom); "Self-Direction in Adult Undergraduates" (Blowers); "Commodification of Adult Education" (Briton, Plumb); "Collective Group Learning" (Brooks); "Psychosocial Development of Women" (Caffarella, Barnett); "Writing Wrongs"…

  17. Domestic wash water reclamation

    NASA Technical Reports Server (NTRS)

    Hall, J. B., Jr.; Batten, C. E.; Wilkins, J. R.

    1974-01-01

    System consists of filtration unit, reverse-osmosis module, tanks, pumps, plumbing, and various gauges, meters, and valves. After water is used in washing machine or shower, it is collected in holding tank. Water is pumped through series of five particulate filters. Pressure tank supplies processed water to commode water closet.

  18. 7 CFR 1777.21 - Use of funds.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... reasonable costs for closing abandoned septic tanks and water wells when necessary to protect the health and...) Construct, enlarge, extend, or otherwise improve community water and/or waste disposal systems. Otherwise improve would include extending service lines to and/or connecting residence's plumbing to the system. (2...

  19. 7 CFR 1777.21 - Use of funds.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... reasonable costs for closing abandoned septic tanks and water wells when necessary to protect the health and...) Construct, enlarge, extend, or otherwise improve community water and/or waste disposal systems. Otherwise improve would include extending service lines to and/or connecting residence's plumbing to the system. (2...

  20. 7 CFR 1777.21 - Use of funds.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... reasonable costs for closing abandoned septic tanks and water wells when necessary to protect the health and...) Construct, enlarge, extend, or otherwise improve community water and/or waste disposal systems. Otherwise improve would include extending service lines to and/or connecting residence's plumbing to the system. (2...

  1. 7 CFR 1777.21 - Use of funds.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... reasonable costs for closing abandoned septic tanks and water wells when necessary to protect the health and...) Construct, enlarge, extend, or otherwise improve community water and/or waste disposal systems. Otherwise improve would include extending service lines to and/or connecting residence's plumbing to the system. (2...

  2. Building Trades 1. Course Outline.

    ERIC Educational Resources Information Center

    Hill, Clair S.

    Intended to assist building trades instructors, this course outline to a prevocational building trades program for junior and senior high school students covers four occupational areas: carpentry, masonry, plumbing, and electricity. Specific notes to the administrator and teacher and the course goals precede the four occupational units. Each unit…

  3. Building Construction. Competency-Based Education Curriculum.

    ERIC Educational Resources Information Center

    West Virginia State Vocational Curriculum Lab., Cedar Lakes.

    Developed and field-tested over a 2-year period by vocational teachers in West Virginia, this competency-based building construction curriculum contains five units of study: Safety, form carpentry, carpentry, masonry, and plumbing. Each unit is subdivided into several competencies, and for each competency taught the performance objectives,…

  4. Challenges in Addressing Variability Of Lead in Domestic Plumbing

    EPA Science Inventory

    Current data indicate that lead exposure is of concern even at low concentrations. Corrosion is an important problem in drinking water because it can affect public health due to leaching of lead or other metals into the drinking water. For this reason, a corrosion control program...

  5. Teaching the Right Stuff: Where It's Happening Today.

    ERIC Educational Resources Information Center

    Mrachek, Len; And Others

    1984-01-01

    These five articles discuss the improvement of vocational education programs through the infusion of mathematics and science skills. They include an auto mechanics curriculum; an 11th-grade industrial maintenance program (orientation, electricity, plumbing); a combination automotive services-small business program; and two programs at one…

  6. Drinking Water Corrosion Control and POU/POE: Where Are the Boundaries?

    EPA Science Inventory

    Protection of public health often has to go beyond regulatory limits, because the health threats do not necessarily arise under the "legal control" of the public water system. Residential and building plumbing can be a very significant contamination source under typical usage co...

  7. 32 CFR 644.450 - Items excluded from usual restoration obligation.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ..., ventilators, and metal ceilings. (8) Structural steel or iron. (9) Fire escapes. (10) Heating systems. (11) Plumbing systems. (12) Ventilating systems and air conditioning systems. (13) Power plants. (14) Electric wiring. (15) Lighting fixtures (or replacement). (16) Sprinkler systems. (f) Settling or subsidence. (g...

  8. 32 CFR 644.450 - Items excluded from usual restoration obligation.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ..., ventilators, and metal ceilings. (8) Structural steel or iron. (9) Fire escapes. (10) Heating systems. (11) Plumbing systems. (12) Ventilating systems and air conditioning systems. (13) Power plants. (14) Electric wiring. (15) Lighting fixtures (or replacement). (16) Sprinkler systems. (f) Settling or subsidence. (g...

  9. 32 CFR 644.450 - Items excluded from usual restoration obligation.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ..., ventilators, and metal ceilings. (8) Structural steel or iron. (9) Fire escapes. (10) Heating systems. (11) Plumbing systems. (12) Ventilating systems and air conditioning systems. (13) Power plants. (14) Electric wiring. (15) Lighting fixtures (or replacement). (16) Sprinkler systems. (f) Settling or subsidence. (g...

  10. Utilitiesman 3 and 2. Rate Training Manual. Revised 1973.

    ERIC Educational Resources Information Center

    Naval Training Command, Pensacola, FL.

    This Rate Training Manual provides the technical knowledge and skill requirements necessary to prepare Utilitiesmen to perform tasks involved in the installation, maintenance, and repair of plumbing, heating, steam, fuel storage and distribution systems, water treatment and distribution systems, air conditioning and refrigeration equipment, and…

  11. Energy Manpower Study, 1980.

    ERIC Educational Resources Information Center

    Seward County Community Coll., Liberal, KS.

    A study was conducted in Kansas to determine the need for vocational education programs in solar energy technology in community colleges. After a literature search revealed a project need for trained solar energy technicians, Seward County Community College surveyed 100 Kansas heating, air conditioning, and plumbing companies to determine future…

  12. 14 CFR 23.1323 - Airspeed indicating system.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... instrument calibration error when the corresponding pitot and static pressures are applied. (b) Each airspeed... positive drainage of moisture from the pitot static plumbing. (d) If certification for instrument flight rules or flight in icing conditions is requested, each airspeed system must have a heated pitot tube or...

  13. The Effects of Orthophosphate in Drinking Water on the Initial Copper Corrosion Using Atomic Force Microscopy

    EPA Science Inventory

    Corroding of copper piping used in household drinking water plumbing may potentially impacts consumer’s health and economics. Copper corrosion studies conducted on newly corroding material with atomic force microscopy (AFM) may be particularly useful in understanding the impact ...

  14. 7. Photocopy of War Department drawing (original located at Fort ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    7. Photocopy of War Department drawing (original located at Fort McCoy, Wisconsin). ARCHITECTURAL, STRUCTURAL, PLUMBING, HEATING, ELECTRICAL, PLAN NUMBER 800-308 - Fort McCoy, Building No. T-901, 125' South of Intersection of East "S" Street & East Twelfth Avenue, Sparta, Monroe County, WI

  15. 26 CFR 1.466-2 - Special protective election for certain taxpayers.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... which would not be treated as qualified discount coupons under Code section 466. Third, certain expenses... years), even though such expenses would not be deductible under Code section 466. (b) Requirements. In... method provided in § 1.451-4 or its predecessors under the Internal Revenue Code of 1954; (2) The...

  16. 40 CFR 52.824 - Original identification of plan section.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... rules, “Iowa Administrative Code,” effective February 22, 1995. This revision approves new definitions... definition updates. (E) “Iowa Administrative Code,” section 567-31.1, effective February 22, 1995. This rule... Quality and replaced the Iowa air pollution control statute which appeared as Chapter 136B of the Code of...

  17. 26 CFR 1.466-2 - Special protective election for certain taxpayers.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... which would not be treated as qualified discount coupons under Code section 466. Third, certain expenses... years), even though such expenses would not be deductible under Code section 466. (b) Requirements. In... method provided in § 1.451-4 or its predecessors under the Internal Revenue Code of 1954; (2) The...

  18. 40 CFR 52.824 - Original identification of plan section.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... rules, “Iowa Administrative Code,” effective February 22, 1995. This revision approves new definitions... definition updates. (E) “Iowa Administrative Code,” section 567-31.1, effective February 22, 1995. This rule... Quality and replaced the Iowa air pollution control statute which appeared as Chapter 136B of the Code of...

  19. 26 CFR 1.466-2 - Special protective election for certain taxpayers.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... which would not be treated as qualified discount coupons under Code section 466. Third, certain expenses... years), even though such expenses would not be deductible under Code section 466. (b) Requirements. In... method provided in § 1.451-4 or its predecessors under the Internal Revenue Code of 1954; (2) The...

  20. 40 CFR 52.824 - Original identification of plan section.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... rules, “Iowa Administrative Code,” effective February 22, 1995. This revision approves new definitions... definition updates. (E) “Iowa Administrative Code,” section 567-31.1, effective February 22, 1995. This rule... Quality and replaced the Iowa air pollution control statute which appeared as Chapter 136B of the Code of...

  1. 40 CFR 52.824 - Original identification of plan section.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... rules, “Iowa Administrative Code,” effective February 22, 1995. This revision approves new definitions... definition updates. (E) “Iowa Administrative Code,” section 567-31.1, effective February 22, 1995. This rule... Quality and replaced the Iowa air pollution control statute which appeared as Chapter 136B of the Code of...

  2. 26 CFR 1.466-2 - Special protective election for certain taxpayers.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... which would not be treated as qualified discount coupons under Code section 466. Third, certain expenses... years), even though such expenses would not be deductible under Code section 466. (b) Requirements. In... method provided in § 1.451-4 or its predecessors under the Internal Revenue Code of 1954; (2) The...

  3. SASS-1--SUBASSEMBLY STRESS SURVEY CODE

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Friedrich, C.M.

    1960-01-01

    SASS-1, an IBM-704 FORTRAN code, calculates pressure, thermal, and combined stresses in a nuclear reactor core subassembly. In addition to cross- section stresses, the code calculates axial shear stresses needed to keep plane cross sections plane under axial variations of temperature. The input and output nomenclature, arrangement, and formats are described. (B.O.G.)

  4. 40 CFR 52.1570 - Identification of plan.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... regulation, section 7:1-3.1 of New Jersey Air Pollution Control Code, submitted on November 20, 1973, by the... regulation, section 7:27-2.1 of the New Jersey Air Pollution Control Code, submitted on November 19, 1975, by... and Prohibition of Air Pollution by Volatile Organic Substances,” New Jersey Administrative Code (N.J...

  5. 40 CFR 52.1570 - Identification of plan.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... regulation, section 7:1-3.1 of New Jersey Air Pollution Control Code, submitted on November 20, 1973, by the... regulation, section 7:27-2.1 of the New Jersey Air Pollution Control Code, submitted on November 19, 1975, by... and Prohibition of Air Pollution by Volatile Organic Substances,” New Jersey Administrative Code (N.J...

  6. 40 CFR 52.1570 - Identification of plan.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... regulation, section 7:1-3.1 of New Jersey Air Pollution Control Code, submitted on November 20, 1973, by the... regulation, section 7:27-2.1 of the New Jersey Air Pollution Control Code, submitted on November 19, 1975, by... and Prohibition of Air Pollution by Volatile Organic Substances,” New Jersey Administrative Code (N.J...

  7. 30 CFR 905.773 - Requirements for permits and permit processing.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ..., 42 U.S.C. 7401 et seq California Air Pollution Control Laws, Cal. Health & Safety Code section 39000... (11) Noise Control Act, 42 U.S.C. 4903 California Noise Control Act of 1973, Cal. Health & Safety Code... Pollution Control Laws, Cal. Health & Safety Code section 39000 et seq.; the Hazardous Waste Control Law...

  8. FY17 Status Report on NEAMS Neutronics Activities

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Lee, C. H.; Jung, Y. S.; Smith, M. A.

    2017-09-30

    Under the U.S. DOE NEAMS program, the high-fidelity neutronics code system has been developed to support the multiphysics modeling and simulation capability named SHARP. The neutronics code system includes the high-fidelity neutronics code PROTEUS, the cross section library and preprocessing tools, the multigroup cross section generation code MC2-3, the in-house meshing generation tool, the perturbation and sensitivity analysis code PERSENT, and post-processing tools. The main objectives of the NEAMS neutronics activities in FY17 are to continue development of an advanced nodal solver in PROTEUS for use in nuclear reactor design and analysis projects, implement a simplified sub-channel based thermal-hydraulic (T/H)more » capability into PROTEUS to efficiently compute the thermal feedback, improve the performance of PROTEUS-MOCEX using numerical acceleration and code optimization, improve the cross section generation tools including MC2-3, and continue to perform verification and validation tests for PROTEUS.« less

  9. Using the NASA GRC Sectored-One-Dimensional Combustor Simulation

    NASA Technical Reports Server (NTRS)

    Paxson, Daniel E.; Mehta, Vishal R.

    2014-01-01

    The document is a user manual for the NASA GRC Sectored-One-Dimensional (S-1-D) Combustor Simulation. It consists of three sections. The first is a very brief outline of the mathematical and numerical background of the code along with a description of the non-dimensional variables on which it operates. The second section describes how to run the code and includes an explanation of the input file. The input file contains the parameters necessary to establish an operating point as well as the associated boundary conditions (i.e. how it is fed and terminated) of a geometrically configured combustor. It also describes the code output. The third section describes the configuration process and utilizes a specific example combustor to do so. Configuration consists of geometrically describing the combustor (section lengths, axial locations, and cross sectional areas) and locating the fuel injection point and flame region. Configuration requires modifying the source code and recompiling. As such, an executable utility is included with the code which will guide the requisite modifications and insure that they are done correctly.

  10. An evaluation of four single element airfoil analytic methods

    NASA Technical Reports Server (NTRS)

    Freuler, R. J.; Gregorek, G. M.

    1979-01-01

    A comparison of four computer codes for the analysis of two-dimensional single element airfoil sections is presented for three classes of section geometries. Two of the computer codes utilize vortex singularities methods to obtain the potential flow solution. The other two codes solve the full inviscid potential flow equation using finite differencing techniques, allowing results to be obtained for transonic flow about an airfoil including weak shocks. Each program incorporates boundary layer routines for computing the boundary layer displacement thickness and boundary layer effects on aerodynamic coefficients. Computational results are given for a symmetrical section represented by an NACA 0012 profile, a conventional section illustrated by an NACA 65A413 profile, and a supercritical type section for general aviation applications typified by a NASA LS(1)-0413 section. The four codes are compared and contrasted in the areas of method of approach, range of applicability, agreement among each other and with experiment, individual advantages and disadvantages, computer run times and memory requirements, and operational idiosyncrasies.

  11. Surface Characterization on Corrosion By-products on Cu in Drinking Water Pipes

    EPA Science Inventory

    Copper is widely used in house-hold plumbing due to its anti-corrosion property. However, as water travels within the distribution system into corroded copper pipes, copper may be released into consumer’s tap causing major problems. In an attempt to understand the mechanism and...

  12. 77 FR 13311 - Arbitration Panel Decision Under the Randolph-Sheppard Act

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-03-06

    ... Rutherford Beard (Complainant) alleged that the Michigan Commission for the Blind, the State licensing agency... alleged that the SLA violated the Act and its implementing regulations and State rules and regulations... at the Lewis Cass Building for renovation and plumbing repairs, resulting in loss of income for the...

  13. 24 CFR 3285.606 - Ductwork connections.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... URBAN DEVELOPMENT MODEL MANUFACTURED HOME INSTALLATION STANDARDS Ductwork and Plumbing and Fuel Supply... type duct, the straps must be at least 1/2″ wider than the spacing of the metal spirals encasing the duct. The ducts must be installed such that the straps cannot slip between any two spirals and arranged...

  14. Laser Altimeter for Flight Simulator

    NASA Technical Reports Server (NTRS)

    Webster, L. D.

    1986-01-01

    Height of flight-simulator probe above model of terrain measured by automatic laser triangulation system. Airplane simulated by probe that moves over model of terrain. Altitude of airplane scaled from height of probe above model. Height measured by triangulation of laser beam aimed at intersection of model surface with plumb line of probe.

  15. INDUCTION OF NITRIC OXIDE SYNTHASE AND ASSOCIATED TOXICITY IN LIVERS OF HARDHEAD CATFISH, ARIUS FELIS, FROM CONTROL AND EPIZOOTIC SITES

    EPA Science Inventory

    Earlier work with a live channel catfish (Ictalurus punctatus) pathogen, Edwardsiella ictaluri, demonstrated the induction of nitric oxide synthase (NOS) in the head kidney, paralleling enteric septicemia (Hawke et al. 1981; Schoor and Plumb 1994). However, another study exposing...

  16. 24 CFR 3280.609 - Water distribution systems.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 24 Housing and Urban Development 5 2011-04-01 2011-04-01 false Water distribution systems. 3280....609 Water distribution systems. (a) Water supply—(1) Supply piping. Piping systems shall be sized to provide an adequate quantity of water to each plumbing fixture at a flow rate sufficient to keep the...

  17. 16 CFR 305.16 - Labeling and marking for plumbing products.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... CONGRESS ENERGY AND WATER USE LABELING FOR CONSUMER PRODUCTS UNDER THE ENERGY POLICY AND CONSERVATION ACT... estimated annual operating costs of covered showerheads, faucets, water closets, and urinals or ranges of...) Showerheads and faucets. Showerheads and faucets shall be marked and labeled as follows: (1) Each showerhead...

  18. 15. Photocopy of architectural drawing (from Albuquerque Area Indian Health ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    15. Photocopy of architectural drawing (from Albuquerque Area Indian Health Service, Division of Health Facilities, Albuquerque, New Mexico) Mayers, Murray, and Phillip, Architects, New York, NY, 1934 First Floor - plumbing - Taos Indian Health Center, 0.3 mile south-southwest of Pueblos Plaza, Taos Pueblo, Taos County, NM

  19. 24 CFR 3280.609 - Water distribution systems.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 24 Housing and Urban Development 5 2012-04-01 2012-04-01 false Water distribution systems. 3280....609 Water distribution systems. (a) Water supply—(1) Supply piping. Piping systems shall be sized to provide an adequate quantity of water to each plumbing fixture at a flow rate sufficient to keep the...

  20. A SIMPLE APPROACH TO ASSESSING COPPER PITTING CORROSION TENDENCIES AND DEVELOPING CONTROL STRATEGIES

    EPA Science Inventory

    Localized corrosion of copper plumbing in drinking water distribution systems can lead to pinhole leaks, which are a growing problem for many homeowners. Although water quality is one factor that can be responsible for localized copper corrosion, there is not a good approach to ...

  1. Pitting Corrosion of Copper in Waters with High pH and Low Alkalinity

    EPA Science Inventory

    Localized or pitting corrosion of copper pipes used in household drinking-water plumbing is a problem for many water utilities and their customers. Extreme attack can lead to pinhole water leaks that may result in water damage, mold growth, and costly repairs. Water quality has b...

  2. The Impact of Hexametaphosphate, Orthophosphate, and Temperature on Copper Corrosion and Release

    EPA Science Inventory

    Excessive corrosion of copper plumbing can lead to elevated copper levels at consumer’s tap or pinhole leaks. Corrosion control solutions include pH adjustment or phosphate addition. Orthophosphate has been shown to reduce copper levels in some cases while the role of polyphosp...

  3. Copper and Lead Corrosion in a Full Scale Home Plumbning system Simulation

    EPA Science Inventory

    The corrosion of household or premise plumbing materials (such as copper, brass, and solder) and the metal release that results from that corrosion can cause numerous problems, ranging from elevated lead and copper levels to blue water and copper pinhole leaks. If left untreate...

  4. Racial Inequality and Child Mortality in Brazil.

    ERIC Educational Resources Information Center

    Wood, Charles H.; Lovell, Peggy A.

    1992-01-01

    In 1980 urban Brazil, race of mother significantly affected child mortality after controlling for region, income, and parent education, with a mortality gap of 6.7 years between the whites and Afro-Brazilians. Parent education, indoor plumbing, access to public health care, and presence of adult females significantly reduced the probability of…

  5. 78 FR 19009 - Notice Pursuant to the National Cooperative Research and Production Act of 1993-International...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-03-28

    ... DEPARTMENT OF JUSTICE Antitrust Division Notice Pursuant to the National Cooperative Research and Production Act of 1993--International Association of Plumbing and Mechanical Officials Notice is hereby given... Mechanical Officials (``IAPMO'') has filed written notifications simultaneously with the Attorney General and...

  6. 7 CFR 3550.117 - WWD grant purposes.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... (48 square feet) in size. (f) Pay reasonable costs for closing abandoned septic tanks and water wells... for individuals to: (a) Extend service lines from the system to their residence. (b) Connect service lines to residence's plumbing. (c) Pay reasonable charges or fees for connecting to a system. (d) Pay...

  7. 7 CFR 3550.117 - WWD grant purposes.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... (48 square feet) in size. (f) Pay reasonable costs for closing abandoned septic tanks and water wells... for individuals to: (a) Extend service lines from the system to their residence. (b) Connect service lines to residence's plumbing. (c) Pay reasonable charges or fees for connecting to a system. (d) Pay...

  8. 24 CFR 3280.602 - Definitions.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... access thereto, but which may require removal of an access panel or opening of a door. Air gap (water... opening from any pipe or faucet supplying water to a tank, plumbing fixture, water supplied appliances, or... manufactured home. Backflow means the flow of water or other liquids, mixtures, or substances into the...

  9. The Connecticut Precane.

    ERIC Educational Resources Information Center

    Foy, C. J.; And Others

    1991-01-01

    The Connecticut Precane is a device made from plastic plumbing tubing and is used in orientation and mobility instruction with young blind children. It can be customized to the appropriate length, and runners made from curved tubing glide over surfaces without tending to change direction. A parts list for precane construction is included. (JDD)

  10. STAGNATION TIME, COMPOSITION, PH, AND ORTHOPHOSPHATE EFFECTS ON METAL LEACHING FROM BRASS

    EPA Science Inventory

    Plumbing products made of brass and similar alloys are the only lead containing materials still installed in drinking water systems and, by law, may contain up to 8% lead. Brass ranges in metal composition depending on its application. Brass is composed of approximately 60 to 80%...

  11. 24 CFR 3285.606 - Ductwork connections.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... URBAN DEVELOPMENT MODEL MANUFACTURED HOME INSTALLATION STANDARDS Ductwork and Plumbing and Fuel Supply... type duct, the straps must be at least 1/2″ wider than the spacing of the metal spirals encasing the duct. The ducts must be installed such that the straps cannot slip between any two spirals and arranged...

  12. PREDICTING LEAD DISSOLUTION IN DRINKING WATER DISTRIBUTION SYSTEMS: EFFECT OF FLUORIDE ADDITIVES ON LEAD SOLUBILITY AND CORROSION

    EPA Science Inventory

    Many water systems have encountered difficulties in meeting the action levels established by the Lead and Copper Rule. Several chemical parameters contribute to the corrosion of lead plumbing and may influence the nature of the passivating films formed on distribution materials....

  13. A LABORATORY STUDY OF LEAD LEACHING FROM DRINKING WATER FAUCETS

    EPA Science Inventory

    A test pilot system was constructed to evaluate lead leaching from 12 different kitchen faucets. torage tank, pressure pump, and manifold System was operated to simulate, as closely as possible, the use of the faucets In a household plumbing system. eaching of lead from the fauce...

  14. Tour Your Schools with This Energy Checklist in Hand.

    ERIC Educational Resources Information Center

    Barnett, Mark R.

    1991-01-01

    Provides a checklist for administrators to use while looking for signs of wasted energy and examining lighting, building construction, heating and ventilation systems, and plumbing and refrigeration. After completing the checklist for a single building or every school in the district, administrators should prioritize physical changes needed for…

  15. A comparison of assays measuring the viability of Legionella pneumophila after treatment with copper and silver ions

    EPA Science Inventory

    Background: The relatively high prevalence of Legionella pneumophila in premise plumbing systems has been widely reported. Published reports indicate Legionella has a comparatively high resistance to chlorine and moreover has the ability to grow in phagocytic amoeba which could p...

  16. Teaching Structured Design of Network Algorithms in Enhanced Versions of SQL

    ERIC Educational Resources Information Center

    de Brock, Bert

    2004-01-01

    From time to time developers of (database) applications will encounter, explicitly or implicitly, structures such as trees, graphs, and networks. Such applications can, for instance, relate to bills of material, organization charts, networks of (rail)roads, networks of conduit pipes (e.g., plumbing, electricity), telecom networks, and data…

  17. 24 CFR 3280.609 - Water distribution systems.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 24 Housing and Urban Development 5 2013-04-01 2013-04-01 false Water distribution systems. 3280....609 Water distribution systems. (a) Water supply—(1) Supply piping. Piping systems shall be sized to provide an adequate quantity of water to each plumbing fixture at a flow rate sufficient to keep the...

  18. 24 CFR 3285.605 - Fuel supply system.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 24 Housing and Urban Development 5 2012-04-01 2012-04-01 false Fuel supply system. 3285.605... URBAN DEVELOPMENT MODEL MANUFACTURED HOME INSTALLATION STANDARDS Ductwork and Plumbing and Fuel Supply Systems § 3285.605 Fuel supply system. (a) Proper supply pressure. The gas piping system in the home is...

  19. 7 CFR 51.56 - Buildings and structures.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... waste disposal and plumbing system maintained in good repair; (d) Each room in which the product is graded or stored shall be designed and constructed as to insure operating conditions of a clean and orderly character and shall be maintained in a clean and sanitary manner; and, (e) Every practical...

  20. 7 CFR 51.56 - Buildings and structures.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... waste disposal and plumbing system maintained in good repair; (d) Each room in which the product is graded or stored shall be designed and constructed as to insure operating conditions of a clean and orderly character and shall be maintained in a clean and sanitary manner; and, (e) Every practical...

  1. Health and Safety in the School Environment. A Manual of Recommended Practice.

    ERIC Educational Resources Information Center

    Center for Disease Control (DHEW/PHS), Atlanta, GA.

    This manual emphasizes the health relationships in the physical school environment and provides environmental criteria by which existing or planned facilities can be evaluated. Individual chapters deal with school health programs; planning for new schools; school site selection, building plan, and plan review; water supply; plumbing; sewage…

  2. Interrelationships between Blended Phosphate Treatment and Scale Formation for a Utility with Lead Pipes

    EPA Science Inventory

    Lead (Pb) in tap water (released from Pb-based plumbing materials) poses a serious public health concern. Water utilities experiencing Pb problems often use orthophosphate treatment, with the theory of forming insoluble Pb(II)-orthophosphate compounds on the pipe wall to inhibit ...

  3. Implementation of ASME Code, Section XI, Code Case N-770, on Alternative Examination Requirements for Class 1 Butt Welds Fabricated with Alloy 82/182

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Sullivan, Edmund J.; Anderson, Michael T.

    In May 2010, the NRC issued a proposed notice of rulemaking that includes a provision to add a new section to its rules to require licensees to implement ASME Code Case N-770, ‘‘Alternative Examination Requirements and Acceptance Standards for Class 1 PWR Piping and Vessel Nozzle Butt Welds Fabricated with UNS N06082 or UNS W86182 Weld Filler Material With or Without the Application of Listed Mitigation Activities, Section XI, Division 1,’’ with 15 conditions. Code Case N-770 contains baseline and inservice inspection (ISI) requirements for unmitigated butt welds fabricated with Alloy 82/182 material and preservice and ISI requirements for mitigatedmore » butt welds. The NRC stated that application of ASME Code Case N-770 is necessary because the inspections currently required by the ASME Code, Section XI, were not written to address stress corrosion cracking Alloy 82/182 butt welds, and the safety consequences of inadequate inspections can be significant. The NRC expects to issue the final rule incorporating this code case into its regulations in the spring 2011 time frame. This paper discusses the new examination requirements, the conditions that NRC is imposing , and the major concerns with implementation of the new Code Case.« less

  4. Annual report, FY 1979 Spent fuel and fuel pool component integrity.

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Johnson, A.B. Jr.; Bailey, W.J.; Schreiber, R.E.

    International meetings under the BEFAST program and under INFCE Working Group No. 6 during 1978 and 1979 continue to indicate that no cases of fuel cladding degradation have developed on pool-stored fuel from water reactors. A section from a spent fuel rack stand, exposed for 1.5 y in the Yankee Rowe (PWR) pool had 0.001- to 0.003-in.-deep (25- to 75-..mu..m) intergranular corrosion in weld heat-affected zones but no evidence of stress corrosion cracking. A section of a 304 stainless steel spent fuel storage rack exposed 6.67 y in the Point Beach reactor (PWR) spent fuel pool showed no significant corrosion.more » A section of 304 stainless steel 8-in.-dia pipe from the Three Mile Island No. 1 (PWR) spent fuel pool heat exchanger plumbing developed a through-wall crack. The crack was intergranular, initiating from the inside surface in a weld heat-affected zone. The zone where the crack occurred was severely sensitized during field welding. The Kraftwerk Union (Erlangen, GFR) disassembled a stainless-steel fuel-handling machine that operated for 12 y in a PWR (boric acid) spent fuel pool. There was no evidence of deterioration, and the fuel-handling machine was reassembled for further use. A spent fuel pool at a Swedish PWR was decontaminated. The procedure is outlined in this report.« less

  5. Electronics Technology. Tech Prep Competency Profile.

    ERIC Educational Resources Information Center

    Lakeland Tech Prep Consortium, Kirtland, OH.

    This tech prep competency profile covers the occupation of electronics technician. Section 1 provides the occupation definition. Section 2 lists development committee members. Section 3 provides the leveling codes--abbreviations for grade level, (by the end of grade 12, by the end of associate degree), academic codes (communications, math, or…

  6. Impacts: NIST Building and Fire Research Laboratory (technical and societal)

    NASA Astrophysics Data System (ADS)

    Raufaste, N. J.

    1993-08-01

    The Building and Fire Research Laboratory (BFRL) of the National Institute of Standards and Technology (NIST) is dedicated to the life cycle quality of constructed facilities. The report describes major effects of BFRL's program on building and fire research. Contents of the document include: structural reliability; nondestructive testing of concrete; structural failure investigations; seismic design and construction standards; rehabilitation codes and standards; alternative refrigerants research; HVAC simulation models; thermal insulation; residential equipment energy efficiency; residential plumbing standards; computer image evaluation of building materials; corrosion-protection for reinforcing steel; prediction of the service lives of building materials; quality of construction materials laboratory testing; roofing standards; simulating fires with computers; fire safety evaluation system; fire investigations; soot formation and evolution; cone calorimeter development; smoke detector standards; standard for the flammability of children's sleepwear; smoldering insulation fires; wood heating safety research; in-place testing of concrete; communication protocols for building automation and control systems; computer simulation of the properties of concrete and other porous materials; cigarette-induced furniture fires; carbon monoxide formation in enclosure fires; halon alternative fire extinguishing agents; turbulent mixing research; materials fire research; furniture flammability testing; standard for the cigarette ignition resistance of mattresses; support of navy firefighter trainer program; and using fire to clean up oil spills.

  7. Innovation and Standardization in School Building: A Proposal for the National Code in Italy.

    ERIC Educational Resources Information Center

    Ridolfi, Giuseppe

    This document discusses the University of Florence's experience and concepts as it developed the research to define a proposal for designing a new national school building code. Section 1 examines the current school building code and the Italian Reform Process in Education between 1960 and 2000. Section 2 details and explains the new school…

  8. An X-Ray Analysis Database of Photoionization Cross Sections Including Variable Ionization

    NASA Technical Reports Server (NTRS)

    Wang, Ping; Cohen, David H.; MacFarlane, Joseph J.; Cassinelli, Joseph P.

    1997-01-01

    Results of research efforts in the following areas are discussed: review of the major theoretical and experimental data of subshell photoionization cross sections and ionization edges of atomic ions to assess the accuracy of the data, and to compile the most reliable of these data in our own database; detailed atomic physics calculations to complement the database for all ions of 17 cosmically abundant elements; reconciling the data from various sources and our own calculations; and fitting cross sections with functional approximations and incorporating these functions into a compact computer code.Also, efforts included adapting an ionization equilibrium code, tabulating results, and incorporating them into the overall program and testing the code (both ionization equilibrium and opacity codes) with existing observational data. The background and scientific applications of this work are discussed. Atomic physics cross section models and calculations are described. Calculation results are compared with available experimental data and other theoretical data. The functional approximations used for fitting cross sections are outlined and applications of the database are discussed.

  9. 27 CFR 53.97 - Constructive sale price; affiliated corporations.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ...; affiliated corporations. 53.97 Section 53.97 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX...; affiliated corporations. (a) In general. Sections 4216(b) (3) and (4) of the Code establish procedures for determining a constructive sale price under section 4216(b)(1)(C) of the Code for sales between corporations...

  10. 27 CFR 53.97 - Constructive sale price; affiliated corporations.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ...; affiliated corporations. 53.97 Section 53.97 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX...; affiliated corporations. (a) In general. Sections 4216(b) (3) and (4) of the Code establish procedures for determining a constructive sale price under section 4216(b)(1)(C) of the Code for sales between corporations...

  11. 27 CFR 53.97 - Constructive sale price; affiliated corporations.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ...; affiliated corporations. 53.97 Section 53.97 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX...; affiliated corporations. (a) In general. Sections 4216(b) (3) and (4) of the Code establish procedures for determining a constructive sale price under section 4216(b)(1)(C) of the Code for sales between corporations...

  12. 27 CFR 53.97 - Constructive sale price; affiliated corporations.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ...; affiliated corporations. 53.97 Section 53.97 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX...; affiliated corporations. (a) In general. Sections 4216(b) (3) and (4) of the Code establish procedures for determining a constructive sale price under section 4216(b)(1)(C) of the Code for sales between corporations...

  13. 75 FR 17854 - Travel Expenses of State Legislators

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-04-08

    ... election under section 162(h) of the Internal Revenue Code (Code). The regulations clarify the amount of... a taxpayer may make or revoke an election under section 162(h). The collection of information is... during the taxable year may make an election under section 162(h) to treat the taxpayer's place of...

  14. Idaho Library Laws, 1999-2000. Full Edition.

    ERIC Educational Resources Information Center

    Idaho State Library, Boise.

    This new edition of the Idaho Library Laws contains changes through the 1998 legislative session and includes Idaho Code sections that legally affect city, school-community or district libraries, or the Idaho State Library. These sections include the basic library laws in Idaho Code Title 33, Chapters 25, 26, and 27, additional sections of the law…

  15. 78 FR 45014 - Proposed Collection; Comment Request for Form 8874-A

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-07-25

    ... written comments to Yvette Lawrence, Internal Revenue Service, room 6129, 1111 Constitution Avenue NW... Code Sections 6109 and 6103.w code section 45N. 45N was added by section 405 of the Tax Relief and... agency, including whether the information shall have practical utility; (b) the accuracy of the agency's...

  16. 78 FR 62411 - Delegation of Authority Under Sections 552(c)(2) and 614 of the Foreign Assistance Act of 1961...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-10-21

    ... laws of the United States of America, including section 301 of title 3, United States Code, I hereby... and the SMC without regard to any other provision of law within the purview of section 614(a)(1) of...] Billing code 3295-F4 ...

  17. 14 CFR 158.15 - Project eligibility at PFC levels of $1, $2, or $3.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ..., ventilation, plumbing, and electrical service), and aircraft fueling facilities next to the gate; (7) A... service airport to low-emission technology certified or verified by the Environmental Protection Agency to... equipment that include low-emission technology or use cleaner burning fuels. (c) An eligible project must be...

  18. 24 CFR 3280.903 - General requirements for designing the structure to withstand transportation shock and vibration.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... HOME CONSTRUCTION AND SAFETY STANDARDS Transportation § 3280.903 General requirements for designing the... manufactured home shall be designed, in terms of its structural, plumbing, mechanical and electrical systems... 24 Housing and Urban Development 5 2010-04-01 2010-04-01 false General requirements for designing...

  19. 7 CFR 761.10 - Planning and performing construction and other development.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... the Agency with an estimate of the total cash cost of all planned development prior to loan approval; (2) Must show proof of sufficient funds to pay for the total cash cost of all planned development at... regulations, including building, plumbing, mechanical, electrical, water, and waste management. (4) The Agency...

  20. 51. Photocopy of copy of original Officers' Duplex Quarters drawing ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    51. Photocopy of copy of original Officers' Duplex Quarters drawing by B.S. Elliott, 7 April 1932 (original in possession of Veterans Administration, Wichita, Kansas, copy at Ablah Library, Wichita State University). Plumbing - Veterans Administration Center, Officers Duplex Quarters, 5302 East Kellogg (Legal Address); 5500 East Kellogg (Common Address), Wichita, Sedgwick County, KS

  1. Proper Installation of Replacement Windows | Efficient Windows

    Science.gov Websites

    . Quality installation is critical for an airtight fit and a continuous water barrier to prevent drafts , water damage and condensation. The complexity of the installation depends on whether you are considering and specifications. Install level, plumb, and square. Install water tight: water must be prevented

  2. THE EFFECT OF PHOSPHATE ON THE MORPHOLOGICAL AND SPECTROSCOPIC PROPERTIES OF COPPER DRINKING WATER PIPES EXPERIENCING LOCALIZED CORROSION

    EPA Science Inventory

    Extensive localized or pitting corrosion of copper pipes used in household drinking-water plumbing can eventually lead to pinhole water leaks that may result in water damage, mold growth, and costly repairs. A large water system in Florida has been addressing a widespread pinhole...

  3. The Effect of Phosphate on the Morphological and Spectroscopic Properties of Copper Pipes Experiencing Localized Corrosion

    EPA Science Inventory

    Extensive localized or pitting corrosion of copper pipes used in household drinking-water plumbing can eventually lead to pinhole water leaks that may result in water damage, mold growth, and costly repairs. A growing number of problems have been associated with high pH and low ...

  4. Modeling Geyser Eruptions in the Classroom

    ERIC Educational Resources Information Center

    Mattox, Stephen; Webster, Christine

    2005-01-01

    Watching Old Faithful transform from a smoldering mound to an explosive 50-meter high geyser is enough to generate awe in any observer. Behind this stunning, visual geologic display is a triad of heat, water, and plumbing that rarely unify on our planet. But geologists are not the only scientists drawn to geysers. Biologists have recently…

  5. 26 CFR 1.1250-5 - Property with two or more elements.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ..., are placed in service and that on July 1, 1972, the taxpayer disposes of the building. Assume further... buildings with common heating and plumbing systems, adds to the motel three new buildings which are... for purposes of this subparagraph the cost of the three new buildings shall be treated as an addition...

  6. Enhancing the Vocational Skills of Incarcerated Women through a Plumbing Maintenance Program

    ERIC Educational Resources Information Center

    Young, Diane S.; Mattucci, Robert F.

    2006-01-01

    Vocational education programs show promise for reducing recidivism, measured most typically through re-arrest and re-incarceration data, among adult offenders. Yet, such programs for women in U.S. correctional facilities have more often provided training in gender-stereotyped and lower-paid professions when compared to vocational programs in men's…

  7. AN INVESTIGATION OF THE IMPACT OF ALLOY COMPOSITION AND PH ON THE CORROSION OF BRASS IN DRINKING WATER

    EPA Science Inventory

    A better understanding of brass corrosion may provide information and guidance on the use of the safest materials for the production of plumbing fixtures, and optimization of corrosion control treatments. The effect of alloy composition and pH on the metal leached from six differ...

  8. 24 CFR 3280.610 - Drainage systems.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... diameter piping shall be required for water closets. (f) Wet-vented drainage system. Plumbing fixture traps... connected to the drainage system shall be installed with a water seal trap (§ 3280.606(a)). (2) The drainage... to which it is connected and shall be equipped with a water-tight cap or plug matching the drain...

  9. Afghan National Engineer Brigade: Despite U.S. Training Efforts, the Brigade is Incapable of Operating Independently

    DTIC Science & Technology

    2016-01-01

    carpentry, masonry , and the operation of heavy equipment. Plans called for the NEB to receive at least $29 million in engineering equipment and...JTF Sapper, NMCB 25, and NMCB 28, had responsibility for training the NEB in such areas as plumbing, electrical work, carpentry, masonry , and

  10. General Construction Trades. Volume 2. Teacher's Guide.

    ERIC Educational Resources Information Center

    East Texas State Univ., Commerce. Occupational Curriculum Lab.

    Twenty-one general construction units are presented in this teacher's guide. The units are organized as follow: concrete finishing-two units (e.g., site preparation, pouring and finishing); plumbing-five units (e.g., pipe joints, angles, and flow; fixtures and valves); electrical wiring-five units (e.g., wiring procedures, planning a layout);…

  11. Construction of an Inexpensive Copper Heat-Pipe Oven

    ERIC Educational Resources Information Center

    Grove, T. T.; Hockensmith, W. A.; Cheviron, N.; Grieser, W.; Dill, R.; Masters, M. F.

    2009-01-01

    We present a new, low-cost method of building an all copper heat-pipe oven that increases the practicality of this device in advanced undergraduate instructional labs. The construction parts are available at local hardware and plumbing supply stores, and the assembly techniques employed are simple and require no machining. (Contains 1 footnote, 3…

  12. Laboratory Evaluation of EGS Shear Stimulation-Test 001

    DOE Data Explorer

    Bauer, Steve

    2014-07-29

    this is the results of an initial setup-shakedon test in order to develop the plumbing system for this test design. a cylinder of granite with offset holes was jacketed and subjected to confining pressure and low temperature (85C) and pore water pressure. flow through the sample was developed at different test stages.

  13. Plumbing and Heating. COM-LINK. Competency Based Vocational Curricula with Basic Skills and Academic Linkages.

    ERIC Educational Resources Information Center

    Mahieu, Louis

    This competency-based module uses the Ocean County (New Jersey) Vocational-Technical Schools curriculum-infused model for infusing basic skills instruction into vocational education. The model demonstrates the relationship of vocational skills to communication, mathematics, and science. The document begins with a philosophy statement; preface; a…

  14. Single Common Powertrain Lubricant (SCPL) Development. Part 2

    DTIC Science & Technology

    2014-04-01

    stand and connected via steel braided Teflon hose to the engines oil filter outlet port. A remote liquid-liquid heat exchanger was then added in...series with the stainless braided Teflon oil lines (after the oil filter), and its return was plumbed back to the engine via the engine’s front lower

  15. An improved apparatus for pressure-injecting fluid into trees

    Treesearch

    Garold F. Gregory; Thomas W. Jones

    1975-01-01

    Our original tree-injection apparatus was modified to be more convenient and efficient. The fluid reservoir consists of high-pressure plastic plumbing components. Quick couplers are used for all hose connections. Most important, the injector heads were modified for a faster and more convenient and secure attachment with double-headed nails.

  16. Minor Maintenance. A Resource Manual for Custodians.

    ERIC Educational Resources Information Center

    Florida State Dept. of Education, Tallahassee.

    Areas of minor maintenance covered by this manual are--(1) electrical, (2) carpentry, (3) plumbing, (4) painting, and (5) masonry. Each area is defined, tools and equipment for maintenance are listed, and the job procedure is given. The description of electrical work also covers sources of electricity and power transmission. The description of…

  17. Preheating Water In The Covers Of Solar Water Heaters

    NASA Technical Reports Server (NTRS)

    Bhandari, Pradeep

    1995-01-01

    Solar water heaters that include glass covers over absorber plates redesigned to increase efficiencies according to proposal. Redesign includes modification of single-layer glass cover into double-layer glass cover and addition of plumbing so cool water to be heated made to flow between layers of cover before entering absorber plate.

  18. 14 CFR 158.15 - Project eligibility at PFC levels of $1, $2, or $3.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ..., ventilation, plumbing, and electrical service), and aircraft fueling facilities next to the gate; (7) A... service airport to low-emission technology certified or verified by the Environmental Protection Agency to... equipment that include low-emission technology or use cleaner burning fuels. (c) An eligible project must be...

  19. Quality Assurance Project Plan For Verification of ANDalyze Lead100 Test Kit and AND1000 Fluorimeter

    EPA Science Inventory

    Lead (Pb) is a naturally occurring metal in the aquatic environment; however, most Pb contamination of concern arises from anthropogenic sources (such as deposition of Pb dust from combustion processes in natural waterways or due to its use in plumbing materials). Although Pb is...

  20. 7 CFR 51.56 - Buildings and structures.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... be an efficient waste disposal and plumbing system maintained in good repair; (d) Each room in which... a clean and orderly character and shall be maintained in a clean and sanitary manner; and, (e) Every practical precaution shall be taken to exclude dogs, cats, rodents and other vermin from the rooms in which...

  1. 7 CFR 51.56 - Buildings and structures.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... be an efficient waste disposal and plumbing system maintained in good repair; (d) Each room in which... a clean and orderly character and shall be maintained in a clean and sanitary manner; and, (e) Every practical precaution shall be taken to exclude dogs, cats, rodents and other vermin from the rooms in which...

  2. Revising and Updating the Agricultural Mechanics Components of the Connecticut Vocational Agriculture Curriculum.

    ERIC Educational Resources Information Center

    EASTCONN Regional Educational Services Center, North Windham, CT.

    This curriculum guide contains 28 competency-based units of study for use in high school agricultural mechanics courses, especially in Connecticut. The 10 exploratory units, suitable for grades 9-10, cover the following topics: beginning welding; cold metal and soldering; electricity; plumbing; power tools; shop safety, mathematics, painting and…

  3. Functional Literacy in Romania: Between Myth & Reality. Chapter 13.

    ERIC Educational Resources Information Center

    Anghel, Florentina

    This chapter reviews the history of literacy training in Romania through the pretotalitarian period (1890-1945), the totalitarian period (1945-1989), and the posttotalitarian period (1989-present). Current literacy development efforts face many challenges including the facts that 592 classrooms do not have indoor plumbing, that more than 1,700…

  4. Recreation Vehicle Service Technician: Apprenticeship Course Outline. Apprenticeship and Industry Training. 4507.1

    ERIC Educational Resources Information Center

    Alberta Advanced Education and Technology, 2007

    2007-01-01

    The graduate of the Recreational Vehicle Service Technician apprenticeship program is a certified journeyperson who will be able to: (1) know the standards and regulations that relate to recreation vehicles; (2) install, repair and maintain LP gas distribution systems and appliances; (3) install, repair and maintain plumbing and electrical…

  5. Photocopy of drawing (this photograph is an 8" x 10" ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Photocopy of drawing (this photograph is an 8" x 10" copy of an 8" x 10" negative; microfilm of 1908 architectural drawing located at NARA) Plumbing arrangement for quarters G and I - U.S. Naval Air Station, Senior Officers' Quarters Q-2, Q-2 North Avenue, Pensacola, Escambia County, FL

  6. An Epiphany in a Toilet Factory

    ERIC Educational Resources Information Center

    Cobb, Catlin

    2009-01-01

    In this article, the author shares her experiences of the universality of art making and artistic experience of being a dancer and teaching artist. She describes her performance at Kohler, a worldwide leader in plumbing products in Spartanburg, South Carolina, where she had an epiphany dancing in a toilet factory--a sudden, intuitive moment of…

  7. Methodological approaches for monitoring opportunistic pathogens in premise plumbing: A review.

    PubMed

    Wang, Hong; Bédard, Emilie; Prévost, Michèle; Camper, Anne K; Hill, Vincent R; Pruden, Amy

    2017-06-15

    Opportunistic premise (i.e., building) plumbing pathogens (OPPPs, e.g., Legionella pneumophila, Mycobacterium avium complex, Pseudomonas aeruginosa, Acanthamoeba, and Naegleria fowleri) are a significant and growing source of disease. Because OPPPs establish and grow as part of the native drinking water microbiota, they do not correspond to fecal indicators, presenting a major challenge to standard drinking water monitoring practices. Further, different OPPPs present distinct requirements for sampling, preservation, and analysis, creating an impediment to their parallel detection. The aim of this critical review is to evaluate the state of the science of monitoring OPPPs and identify a path forward for their parallel detection and quantification in a manner commensurate with the need for reliable data that is informative to risk assessment and mitigation. Water and biofilm sampling procedures, as well as factors influencing sample representativeness and detection sensitivity, are critically evaluated with respect to the five representative bacterial and amoebal OPPPs noted above. Available culturing and molecular approaches are discussed in terms of their advantages, limitations, and applicability. Knowledge gaps and research needs towards standardized approaches are identified. Copyright © 2017 Elsevier Ltd. All rights reserved.

  8. The role of water in healthcare-associated infections.

    PubMed

    Decker, Brooke K; Palmore, Tara N

    2013-08-01

    The aim is to discuss the epidemiology of infections that arise from contaminated water in healthcare settings, including Legionnaires' disease, other Gram-negative pathogens, nontuberculous mycobacteria, and fungi. Legionella can colonize a hospital water system and infect patients despite use of preventive disinfectants. Evidence-based measures are available for secondary prevention. Vulnerable patients can develop healthcare-associated infections with waterborne organisms that are transmitted by colonization of plumbing systems, including sinks and their fixtures. Room humidifiers and decorative fountains have been implicated in serious outbreaks, and pose unwarranted risks in healthcare settings. Design of hospital plumbing must be purposeful and thoughtful to avoid the features that foster growth and dissemination of Legionella and other pathogens. Exposure of patients who have central venous catheters and other invasive devices to tap water poses a risk for infection with waterborne pathogens. Healthcare facilities must conduct aggressive clinical surveillance for Legionnaires' disease and other waterborne infections in order to detect and remediate an outbreak promptly. Hand hygiene is the most important measure to prevent transmission of other Gram-negative waterborne pathogens in the healthcare setting.

  9. The Role of Water in Healthcare-Associated Infections

    PubMed Central

    Decker, Brooke K.; Palmore, Tara N.

    2017-01-01

    Purpose of review The aim is to discuss the epidemiology of infections that arise from contaminated water in healthcare settings, including Legionnaire’s disease, other Gram-negative pathogens, nontuberculous mycobacteria, and fungi. Recent findings Legionella can colonize a hospital water system and infect patients despite use of preventive disinfectants. Evidence-based measures are available for secondary prevention. Vulnerable patients can develop care-associated infections with waterborne organisms that are transmitted by colonization of plumbing systems, including sinks and their fixtures. Room humidifiers and decorative fountains have been implicated in serious outbreaks, and pose unwarranted risks in healthcare settings. Summary Design of hospital plumbing must be purposeful and thoughtful to avoid the features that foster growth and dissemination of Legionella and other pathogens. Exposure of patients who have central venous catheters and other invasive devices to tap water poses a risk for infection with waterborne pathogens. Healthcare facilities must conduct aggressive clinical surveillance for Legionnaire’s disease and other waterborne infections in order to detect and remediate an outbreak promptly. Hand hygiene is the most important measure to prevent transmission of other Gram-negative waterborne pathogens in the healthcare setting. PMID:23806897

  10. Magma plumbing system and seismicity of an active mid-ocean ridge volcano.

    PubMed

    Schmid, Florian; Schlindwein, Vera; Koulakov, Ivan; Plötz, Aline; Scholz, John-Robert

    2017-02-20

    At mid-ocean ridges volcanism generally decreases with spreading rate but surprisingly massive volcanic centres occur at the slowest spreading ridges. These volcanoes can host unexpectedly strong earthquakes and vigorous, explosive submarine eruptions. Our understanding of the geodynamic processes forming these volcanic centres is still incomplete due to a lack of geophysical data and the difficulty to capture their rare phases of magmatic activity. We present a local earthquake tomographic image of the magma plumbing system beneath the Segment 8 volcano at the ultraslow-spreading Southwest Indian Ridge. The tomography shows a confined domain of partial melt under the volcano. We infer that from there melt is horizontally transported to a neighbouring ridge segment at 35 km distance where microearthquake swarms and intrusion tremor occur that suggest ongoing magmatic activity. Teleseismic earthquakes around the Segment 8 volcano, prior to our study, indicate that the current magmatic spreading episode may already have lasted over a decade and hence its temporal extent greatly exceeds the frequent short-lived spreading episodes at faster opening mid-ocean ridges.

  11. Identifying elements of the plumbing system beneath Kilauea Volcano, Hawaii, from the source locations of very-long-period signals

    USGS Publications Warehouse

    Almendros, J.; Chouet, B.; Dawson, P.; Bond, T.

    2002-01-01

    We analyzed 16 seismic events recorded by the Hawaiian broad-band seismic network at Kilauca Volcano during the period September 9-26, 1999. Two distinct types of event are identified based on their spectral content, very-long-period (VLP) waveform, amplitude decay pattern and particle motion. We locate the VLP signals with a method based on analyses of semblance and particle motion. Different source regions are identified for the two event types. One source region is located at depths of ~1 km beneath the northeast edge of the Halemaumau pit crater. A second region is located at depths of ~8 km below the northwest quadrant of Kilauea caldera. Our study represents the first time that such deep sources have been identified in VLP data at Kilauea. This discovery opens the possibility of obtaining a detailed image of the location and geometry of the magma plumbing system beneath this volcano based on source locations and moment tensor inversions of VLP signals recorded by a permanent, large-aperture broad-band network.

  12. Methodological Approaches for Monitoring Opportunistic Pathogens in Premise Plumbing: A Review

    PubMed Central

    Wang, Hong; Bedard, Emilie; Prevost, Michele; Camper, Anne K.; Hill, Vincent R.; Pruden, Amy

    2017-01-01

    Opportunistic pathogens inhabiting premise (i.e., building) plumbing (OPPPs, e.g., L. pneumophila, M. avium complex, P. aeruginosa, Acanthamoeba, and N. fowleri) are a significant and growing source of disease. Because OPPPs establish and grow as part of the native drinking water microbiota, they do not correspond to fecal indicators, presenting a significant challenge to common and effective monitoring strategies. Further, different OPPPs present distinct requirements for sampling, preservation, and analysis, creating a significant impediment to their parallel detection. The aim of this critical review is to synthesize the state of the science of monitoring OPPPs and to identify a path forward for their simultaneous detection and quantification in a manner commensurate with the need for reliable data to inform risk assessment and mitigation. Water and biofilm sampling procedures, as well as factors influencing sample representativeness and detection sensitivity, are critically evaluated with respect to the five representative bacterial and amoebal OPPPs noted above. Available culturing and molecular approaches are discussed in terms of their advantages, limitations, and applicability. Knowledge gaps and research needs are identified. PMID:28390237

  13. Application of near real-time radial semblance to locate the shallow magmatic conduit at Kilauea Volcano, Hawaii

    USGS Publications Warehouse

    Dawson, P.; Whilldin, D.; Chouet, B.

    2004-01-01

    Radial Semblance is applied to broadband seismic network data to provide source locations of Very-Long-Period (VLP) seismic energy in near real time. With an efficient algorithm and adequate network coverage, accurate source locations of VLP energy are derived to quickly locate the shallow magmatic conduit system at Kilauea Volcano, Hawaii. During a restart in magma flow following a brief pause in the current eruption, the shallow magmatic conduit is pressurized, resulting in elastic radiation from various parts of the conduit system. A steeply dipping distribution of VLP hypocenters outlines a region extending from sea level to about 550 m elevation below and just east of the Halemaumau Pit Crater. The distinct hypocenters suggest the shallow plumbing system beneath Halemaumau consists of a complex plexus of sills and dikes. An unconstrained location for a section of the conduit is also observed beneath the region between Kilauea Caldera and Kilauea Iki Crater.

  14. The effect of impurity gasses on variable polarity plasma arc welded 2219 aluminum

    NASA Technical Reports Server (NTRS)

    Mcclure, John C.; Torres, Martin R.; Gurevitch, Alan C.; Newman, Robert A.

    1989-01-01

    Variable polarity plasma arc (VPPA) welding has been used with considerable success by NASA for the welds on the Space Shuttle External Tank as well as by others concerned with high quality welded structures. The effects of gaseous contaminants on the appearance of VPPA welds on 2219 aluminum are examined so that a welder can recognize that such contamination is present and take corrective measures. There are many possible sources of such contamination including, contaminated gas bottles, leaks in the gas plumbing, inadequate shield gas flow, condensed moisture in the gas lines or torch body, or excessive contaminants on the workpiece. The gasses chosen for study in the program were nitrogen, oxygen, methane, and hydrogen. Welds were made in a carefully controlled environment and comparisons were made between welds with various levels of these contaminants and welds made with research purity (99.9999 percent) gasses. Photographs of the weld front and backside as well as polished and etched cross sections are presented.

  15. 38 CFR 39.63 - Architectural design standards.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 5000, Building Construction and Safety Code, and the 2002 edition of the National Electrical Code, NFPA... 5000, Building Construction and Safety Code. Where the adopted codes state conflicting requirements... the standards set forth in this section, all applicable local and State building codes and regulations...

  16. 38 CFR 39.63 - Architectural design standards.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 5000, Building Construction and Safety Code, and the 2002 edition of the National Electrical Code, NFPA... 5000, Building Construction and Safety Code. Where the adopted codes state conflicting requirements... the standards set forth in this section, all applicable local and State building codes and regulations...

  17. 38 CFR 39.63 - Architectural design standards.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 5000, Building Construction and Safety Code, and the 2002 edition of the National Electrical Code, NFPA... 5000, Building Construction and Safety Code. Where the adopted codes state conflicting requirements... the standards set forth in this section, all applicable local and State building codes and regulations...

  18. XSECT: A computer code for generating fuselage cross sections - user's manual

    NASA Technical Reports Server (NTRS)

    Ames, K. R.

    1982-01-01

    A computer code, XSECT, has been developed to generate fuselage cross sections from a given area distribution and wing definition. The cross sections are generated to match the wing definition while conforming to the area requirement. An iterative procedure is used to generate each cross section. Fuselage area balancing may be included in this procedure if desired. The code is intended as an aid for engineers who must first design a wing under certain aerodynamic constraints and then design a fuselage for the wing such that the contraints remain satisfied. This report contains the information necessary for accessing and executing the code, which is written in FORTRAN to execute on the Cyber 170 series computers (NOS operating system) and produces graphical output for a Tektronix 4014 CRT. The LRC graphics software is used in combination with the interface between this software and the PLOT 10 software.

  19. Structural Integrity of Water Reactor Pressure Boundary Components.

    DTIC Science & Technology

    1980-08-01

    Boiler and Pressure Vessel Code , Sec. Ill). Estimates of the upper shelf K level from small-specimen...from Appendix A of Section XI of the ASME Boiler and Pressure Vessel Code [11. Figure 9 shows this same data set, together with earlier data for...0969, NRL Memo- randum Report 4063, Sep. 1979. 11. Section XI - ASME Boiler and Pressure Vessel Code , Rules for Inservice Inspection of Nuclear

  20. International Space Station (ISS) Gas Logistics Planning in the Post Shuttle Era

    NASA Technical Reports Server (NTRS)

    Leonard, Daniel J.; Cook, Anthony J.; Lehman, Daniel A.

    2011-01-01

    Over its life the International Space Station (ISS) has received gas (nitrogen, oxygen, and air) from various sources. Nitrogen and oxygen are used in the cabin to maintain total pressure and oxygen partial pressures within the cabin. Plumbed nitrogen is also required to support on-board experiments and medical equipment. Additionally, plumbed oxygen is required to support medical equipment as well as emergency masks and most importantly EVA support. Gas are supplied to ISS with various methods and vehicles. Vehicles like the Progress and ATV deliver nitrogen (both as a pure gas and as air) and oxygen via direct releases into the cabin. An additional source of nitrogen and oxygen is via tanks on the ISS Airlock. The Airlock nitrogen and oxygen tanks can deliver to various users via pressurized systems that run throughout the ISS except for the Russian segment. Metabolic oxygen is mainly supplied via cabin release from the Elektron and Oxygen Generator Assembly (OGA), which are water electrolyzers. As a backup system, oxygen candles (Solid Fuel Oxygen Generators-SFOGs) supply oxygen to the cabin as well. In the past, a major source of nitrogen and oxygen has come from the Shuttle via both direct delivery to the cabin as well as to recharge the ISS Airlock tanks. To replace the Shuttle capability to recharge the ISS Airlock tanks, a new system was developed called Nitrogen/Oxygen Recharge System (NORS). NIORS consists of high pressure (7000 psi) tanks which recharge the ISS Airlock tanks via a blowdown fill for both nitrogen and oxygen. NORS tanks can be brought up on most logistics vehicles such as the HTV, COTS, and ATV. A proper balance must be maintained to insure sufficient gas resources are available on-orbit so that all users have the required gases via the proper delivery method (cabin and/or plumbed).

Some links on this page may take you to non-federal websites. Their policies may differ from this site.
Top