Pulmonary Deposition of Aerosols in Microgravity

NASA Technical Reports Server (NTRS)

Prisk, G. Kim

1997-01-01

The intrapulmonary deposition of airborne particles (aerosol) in the size range of 0.5 to 5 microns is primarily due to gravitational sedimentation. In the microgravity (muG) environment, sedimentation is no longer active, and thus there should be marked changes in the amount and site of the deposition of these aerosol. We propose to study the total intrapulmonary deposition of aerosol spanning the range 0.5 to 5 microns in the KC-135 at both muG and at 1.8-G. This will be followed by using boli of 1.0 micron aerosol, inhaled at different points in a breath to study aerosol dispersion and deposition as a function of inspired depth. The results of these studies will have application in better understanding of pulmonary diseases related to inhaled particles (pneumoconioses), in studying drugs delivered by inhalation, and in understanding the consequence of long-term exposure to respirable aerosols in long-duration space flight.

Pulmonary effects of acute exposure to degradation products of sulphur hexafluoride during electrical cable repair work.

PubMed Central

Kraut, A; Lilis, R

1990-01-01

Six electrical workers accidentally exposed to degradation products of sulphur hexafluoride (SF6) during electrical repair work were followed up for one year. One degradation product, sulphur tetrafluoride (SF4), was identified from worksite measurements. Unprotected exposure in an underground enclosed space occurred for six hours over a 12 hour period. Initial symptoms included shortness of breath, chest tightness, productive cough, nose and eye irritation, headache, fatigue, nausea, and vomiting. Symptoms subsided when exposure was interrupted during attempts to identify the cause of the problem. Although exposure ended after several hours, four workers remained symptomatic for between one week and one month. Pulmonary radiographic abnormalities included several discrete areas of transitory platelike atelectasis in one worker, and a slight diffuse infiltrate in the left lower lobe of another. One worker showed transient obstructive changes in tests of pulmonary function. Examination at follow up after one year showed no persistent abnormalities. Preliminary data from this paper were presented at the VIIth international pneumoconioses conference. Pittsburgh, PA, August 1988. PMID:2271390

Relationship of inflammatory cell cytokines to disease severity in individuals with occupational inorganic dust exposure.

PubMed

Rom, W N

1991-01-01

The pneumoconioses due to chronic occupational exposure to asbestos, coal, or silica are characterized by an alveolar macrophage-dominated alveolitis with exaggerated spontaneous release of mediators: oxidants, chemotaxins for neutrophils, and fibroblast growth factors. Bronchoalveolar lavage was performed on 66 non-smoking inorganic dust-exposed individuals with a chest x-ray greater than or equal to 1/0 stratified by presence or absence of restrictive respiratory impairment, and 28 unexposed non-smoking controls. Both dust-exposed groups stratified by presence or not of impairment had increased numbers of total cells recovered by lavage compared to normals, and those with respiratory impairment (n = 40) had a significant increase in percent and number of neutrophils recovered. Similarly, only those with respiratory impairment had macrophages that spontaneously released significant amounts of the oxidants superoxide anion and hydrogen peroxide. There was a significant trend for the release of fibronectin by macrophages from controls to dust-exposed without impairment to those with impairment. Both dust-exposed groups also had increased release of alveolar macrophage-derived progression growth factor, but this was significantly less than macrophages from patients with idiopathic pulmonary fibrosis. Since occupational exposure was virtually identical in inorganic dust-exposed individuals with versus without respiratory impairment, the quantitative differences in the release of macrophage mediators may be due to factors in host susceptibility.

[Volatile ashes and their biological effect. 2. Fibrogenic effect of volatile ashes].

PubMed

Woźniak, H; Wiecek, E; Lao, I; Wojtczak, J

1989-01-01

In experiments on white Wistar rats fibrogenic effects of 6 samples of fly-ashes collected from electric precipitators in power engineering plants have been evaluated. The coal came from different national deposits. All the ashes have been found to contain: quartz and mullite, 3 ashes contained additionally orthoclase, whereas 1, apart from quartz and mullite, contained kaolinite; naturally radioactive elements (Ra226, K40, Th228) and trace elements (As, Ba, Be, Cd, Ce, Cu, Fe, Pa, Mo, Ni, Pb, Se, U Zu). Experimental pneumoconiosis was induced through intratracheal administration of single doses of 50 mg of dust; the experiment was carried out at 3 time intervals of 3, 6 and 9 months. The fibrogenic activity was evaluated both qualitatively (histopathological methods) and quantitatively (lung weight, hydroxyproline content in lungs, dust elimination from lungs); control groups consisted of animals which obtained NaCl solution and quartz sands. Fly-ashes were found to exhibit different fibrogenic effects, yet, their fibrogenic activity was weaker, compared to quartz sands. No clear correlation was found between fibrogenic effects of ashes and test physico-chemical properties, such as the content of SiO2, trace elements or naturally radioactive elements. Analysis of occupational diseases (for the period section): (1979-1983) demonstrated occupational diseases of dust-related aetiology among power engineering workers, pneumoconioses, constituting 7.8% of 127 cases of occupational diseases.

Mortality among a cohort of uranium mill workers: an update

PubMed Central

Pinkerton, L; Bloom, T; Hein, M; Ward, E

2004-01-01

Aims: To evaluate the mortality experience of 1484 men employed in seven uranium mills in the Colorado Plateau for at least one year on or after 1 January 1940. Methods: Vital status was updated through 1998, and life table analyses were conducted. Results: Mortality from all causes and all cancers was less than expected based on US mortality rates. A statistically significant increase in non-malignant respiratory disease mortality and non-significant increases in mortality from lymphatic and haematopoietic malignancies other than leukaemia, lung cancer, and chronic renal disease were observed. The excess in lymphatic and haematopoietic cancer mortality was due to an increase in mortality from lymphosarcoma and reticulosarcoma and Hodgkin's disease. Within the category of non-malignant respiratory disease, mortality from emphysema and pneumoconioses and other respiratory disease was increased. Mortality from lung cancer and emphysema was higher among workers hired prior to 1955 when exposures to uranium, silica, and vanadium were presumably higher. Mortality from these causes of death did not increase with employment duration. Conclusions: Although the observed excesses were consistent with our a priori hypotheses, positive trends with employment duration were not observed. Limitations included the small cohort size and limited power to detect a moderately increased risk for some outcomes of interest, the inability to estimate individual exposures, and the lack of smoking data. Because of these limitations, firm conclusions about the relation of the observed excesses in mortality and mill exposures are not possible. PMID:14691274

A study of mortality patterns at a tyre factory 1951-1985: a reference statistic dilemma.

PubMed

Veys, C A

2004-08-01

The general and cancer mortalities of rubber workers at a large tyre factory were studied in an area of marked regional variation in death rates. Three quinquennial intakes of male rubber workers engaged between January 1946 and December 1960 formed a composite cohort of 6454 men to be followed up. Over 99% were successfully traced by December 1985. The cohort analysis used both national and local rates as reference statistics for several causes. Between 1951 and 1985, a national standardized mortality ratio (SMRN) of 101 for all causes (based on 2556 deaths) was noted, whereas the local standardized mortality ratio (SMRL) was only 79. For all cancers, the figures were 115 (SMRN) and 93 (SMRL), for stomach cancer they were 137 (SMRN) and 84 (SMRL), and for lung cancer they were 121 (SMRN) and 94 (SMRL). No outright excesses against the national norm were observed for other cancers except for larynx, brain and central nervous system and thyroid cancer and the leukaemias. Excesses were statistically significant for cancer of the gallbladder and the bile ducts, for silicotuberculosis (SMRN = 1000) and for the pneumoconioses (SMRN = 706). Deaths from cerebrovascular diseases, chronic bronchitis and emphysema showed statistically significant deficits using either norm. These results from a large factory cohort study of rubber workers, followed for over three decades, demonstrate the marked discrepancy that can result from using only one reference statistic in areas of significant variation in mortality patterns.

Radiographic progression of silicosis among Japanese tunnel workers in Kochi.

PubMed

Dumavibhat, Narongpon; Matsui, Tomomi; Hoshino, Eri; Rattanasiri, Sasivimol; Muntham, Dittapol; Hirota, Ryoji; Eitoku, Masamitsu; Imanaka, Momo; Muzembo, Basilua Andre; Ngatu, Nlandu Roger; Kondo, Shinichi; Hamada, Norihiko; Suganuma, Narufumi

2013-01-01

The aim of our study was to investigate the natural course of silicosis in terms of radiographic progression among Japanese tunnel workers. Tunnel workers with silicosis were included in our study between January 2008 and June 2011. We retrospectively assessed workers' radiographs from their first through last visits to see whether there was progression. All films were interpreted by two physicians, who had been specially trained in using the ILO (2000) International Classification of Radiographs of Pneumoconioses (ILO/ICRP). We classified the radiographic findings according to the ILO/ICRP. Survival analysis was performed and then presented as time to progression. Subgroup analysis among the progressed group was performed to demonstrate duration of progression. A total of 65 patients, who were no longer exposed to silica for the duration of the study, were included. The mean age at the first visit was 58.60 ± 7.10 years. The incidence rate of progression was 42 per 1,000 person-years with a median time to progression of 17 years. Progression was demonstrated among 33 cases (51%). The mean durations of progression from category 1 to category 4 and category 2 to category 4 were 14.55 and 10.65 years, respectively. Most patients (86%) had radiographic change from category 1 or 2 directly to category 4. Silicosis progressed at a relatively high rate among tunnel workers without further silica exposure. The high probability of progression directly from category 1 to category 4 may lead to further investigation for the improvement of disease prevention.

Particles causing lung disease

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kilburn, K.H.

1984-04-01

The lung has a limited number of patterns of reaction to inhaled particles. The disease observed depends upon the location: conducting airways, terminal bronchioles and alveoli, and upon the nature of inflammation induced: acute, subacute or chronic. Many different agents cause narrowing of conducting airways (asthma) and some of these cause permanent distortion or obliteration of airways as well. Terminal bronchioles appear to be particularly susceptible to particles which cause goblet cell metaplasia, mucous plugging and ultimately peribronchiolar fibrosis. Cancer is the last outcome at the bronchial level and appears to depend upon continuous exposure to or retention of anmore » agent in the airway and failure of the affected cells to be exfoliated which may be due to squamous metaplasia. Alveoli are populated by endothelial cells, Type I or pavement epithelial cells and metabolically active cuboidal Type II cells that produce the lungs specific surfactant, dipalmytol lecithin. Disturbances of surfactant lead to edema in distal lung while laryngeal edema due to anaphylaxis or fumes may produce asphyxia. Physical retention of indigestible particles or retention by immune memory responses may provoke hyaline membranes, stimulate alveolar lipoproteinosis and finally fibrosis. This later exuberant deposition of connective tissue has been best studied in the occupational pneumoconioses especially silicosis and asbestosis. In contrast emphysema a catabolic response appears frequently to result from leakage or release of lysosomal proteases into the lung during processing of cigarette smoke particles. 164 references, 1 figure, 2 tables.« less

Lung burden of a glass fiber by inhalation.

PubMed

Tanaka, I; Akiyama, T; Kido, M

1991-01-01

Pulmonary deposition and clearance of deposited particles from lungs are very important factors in order to induce pneumoconioses. In this paper, five Wistar male rats were exposed to glass fiber particles (mass median aerodynamic diameter (MMAD), 2.8 microns) for 6 hrs/day, 5 days/week for 4 weeks. The average exposure concentration was controlled by a continuous fluidized bed with a screw feeder and an overflow pipe at 0.79 mg/m3 during the exposure period. The fibrous particles concentrations in the exposure chamber were monitored by a light scattering method and showed to be constant during the exposure. The rats were sacrificed at 24 hours after the termination of the exposure and then the wet lung weight and the silica concentration in the lungs were measured. The lungs were treated for low temperature ashing (ca. 150 degrees C) by a plasma asher. After ashing, these samples were melted with sodium carbonate in platinum pot for the measurement of the silica content by the absorption spectrophotometry. The maximum content of SiO2 was 45 micrograms in the exposed rats and 20 micrograms in the control. The deposited amount of SiO2 by the exposure to glass fiber was 25 micrograms. The apparent deposition fraction defined as the deposited amount in the lungs to the amount of the inhaled glass fiber during the exposure was 6.8%. There was no significant difference of the apparent deposition fraction at same MMAD between glass fiber in this study and non-fibrous particles.

Validation of the international labour office digitized standard images for recognition and classification of radiographs of pneumoconiosis.

PubMed

Halldin, Cara N; Petsonk, Edward L; Laney, A Scott

2014-03-01

Chest radiographs are recommended for prevention and detection of pneumoconiosis. In 2011, the International Labour Office (ILO) released a revision of the International Classification of Radiographs of Pneumoconioses that included a digitized standard images set. The present study compared results of classifications of digital chest images performed using the new ILO 2011 digitized standard images to classification approaches used in the past. Underground coal miners (N = 172) were examined using both digital and film-screen radiography (FSR) on the same day. Seven National Institute for Occupational Safety and Health-certified B Readers independently classified all 172 digital radiographs, once using the ILO 2011 digitized standard images (DRILO2011-D) and once using digitized standard images used in the previous research (DRRES). The same seven B Readers classified all the miners' chest films using the ILO film-based standards. Agreement between classifications of FSR and digital radiography was identical, using a standard image set (either DRILO2011-D or DRRES). The overall weighted κ value was 0.58. Some specific differences in the results were seen and noted. However, intrareader variability in this study was similar to the published values and did not appear to be affected by the use of the new ILO 2011 digitized standard images. These findings validate the use of the ILO digitized standard images for classification of small pneumoconiotic opacities. When digital chest radiographs are obtained and displayed appropriately, results of pneumoconiosis classifications using the 2011 ILO digitized standards are comparable to film-based ILO classifications and to classifications using earlier research standards. Published by Elsevier Inc.

Inorganic dust pneumonias: the metal-related parenchymal disorders.

PubMed Central

Kelleher, P; Pacheco, K; Newman, L S

2000-01-01

In recent years the greatest progress in our understanding of pneumoconioses, other than those produced by asbestos, silica, and coal, has been in the arena of metal-induced parenchymal lung disorders. Inhalation of metal dusts and fumes can induce a wide range of lung pathology, including airways disorders, cancer, and parenchymal diseases. The emphasis of this update is on parenchymal diseases caused by metal inhalation, including granulomatous disease, giant cell interstitial pneumonitis, chemical pneumonitis, and interstitial fibrosis, among others. The clinical characteristics, epidemiology, and pathogenesis of disorders arising from exposure to aluminum, beryllium, cadmium, cobalt, copper, iron, mercury, and nickel are presented in detail. Metal fume fever, an inhalation fever syndrome attributed to exposure to a number of metals, is also discussed. Advances in our knowledge of antigen-specific immunologic reactions in the lung are particularly evident in disorders secondary to beryllium and nickel exposure, where immunologic mechanisms have been well characterized. For example, current evidence suggests that beryllium acts as an antigen, or hapten, and is presented by antigen-presenting cells to CD4+ T cells, which possess specific surface antigen receptors. Other metals such as cadmium and mercury induce nonspecific damage, probably by initiating production of reactive oxygen species. Additionally, genetic susceptibility markers associated with increased risk have been identified in some metal-related diseases such as chronic beryllium disease and hard metal disease. Future research needs include development of biologic markers of metal-induced immunologic disease, detailed characterization of human exposure, examination of gene alleles that might confer risk, and association of exposure data with that of genetic susceptibility. PMID:10931787

Occupational asthma in the developing and industrialised world: a review.

PubMed

Jeebhay, M F; Quirce, S

2007-02-01

Occupational asthma is the most common occupational lung disease in industrialised countries, and the second most common occupational lung disease reported after pneumoconioses in developing countries. The median proportion of adult cases of asthma attributable to occupational exposure is between 10% and 15%. The population attributable fraction appears to be similar in industrialised and developing countries characterised by rapid industrialisation (13-15%), but lower in less industrialised developing countries (6%). The high-risk occupations and industries associated with the development of occupational asthma vary depending on the dominant industrial sectors in a particular country. High-risk exposure to cleaning agents and pesticide exposure in developing countries appear to be as important as exposure to isocyanates, cereal flour/grain dust, welding fumes, wood dust and, more recently, hairdressing chemicals, commonly reported in industrialised countries. The reported mean annual incidence of occupational asthma in developing countries is less than 2 per 100 000 population, compared to very high rates of up to 18/100 000 in Scandinavian countries. While occupational asthma remains under-recognised, especially in developing countries, it remains poorly diagnosed and managed and inadequately compensated worldwide. Primary and secondary preventive strategies should be directed at controlling workplace exposures, accompanied by intense educational and managerial improvements. Appropriate treatment remains early removal from exposure to ensure that the worker has no further exposure to the causal agent, with preservation of income. However, up to one third of workers with occupational asthma continue to remain exposed to the causative agent or suffer prolonged work disruption, discrimination and risk of unemployment.

Occupational health of miners at altitude: adverse health effects, toxic exposures, pre-placement screening, acclimatization, and worker surveillance.

PubMed

Vearrier, David; Greenberg, Michael I

2011-08-01

Mining operations conducted at high altitudes provide health challenges for workers as well as for medical personnel. To review the literature regarding adverse health effects and toxic exposures that may be associated with mining operations conducted at altitude and to discuss pre-placement screening, acclimatization issues, and on-site surveillance strategies. We used the Ovid ( http://ovidsp.tx.ovid.com ) search engine to conduct a MEDLINE search for "coal mining" or "mining" and "altitude sickness" or "altitude" and a second MEDLINE search for "occupational diseases" and "altitude sickness" or "altitude." The search identified 97 articles of which 76 were relevant. In addition, the references of these 76 articles were manually reviewed for relevant articles. CARDIOVASCULAR EFFECTS: High altitude is associated with increased sympathetic tone that may result in elevated blood pressure, particularly in workers with pre-existing hypertension. Workers with a history of coronary artery disease experience ischemia at lower work rates at high altitude, while those with a history of congestive heart failure have decreased exercise tolerance at high altitude as compared to healthy controls and are at higher risk of suffering an exacerbation of their heart failure. PULMONARY EFFECTS: High altitude is associated with various adverse pulmonary effects, including high-altitude pulmonary edema, pulmonary hypertension, subacute mountain sickness, and chronic mountain sickness. Mining at altitude has been reported to accelerate silicosis and other pneumoconioses. Miners with pre-existing pneumoconioses may experience an exacerbation of their condition at altitude. Persons traveling to high altitude have a higher incidence of Cheyne-Stokes respiration while sleeping than do persons native to high altitude. Obesity increases the risk of pulmonary hypertension, acute mountain sickness, and sleep-disordered breathing. NEUROLOGICAL EFFECTS: The most common adverse neurological effect of high altitude is acute mountain sickness, while the most severe adverse neurological effect is high-altitude cerebral edema. Poor sleep quality and sleep-disordered breathing may contribute to daytime sleepiness and impaired cognitive performance that could potentially result in workplace injuries, particularly in miners who are already at increased risk of suffering unintentional workplace injuries. OPHTHALMOLOGICAL EFFECTS: Adverse ophthalmological effects include increased exposure to ultraviolet light and xerophthalmia, which may be further exacerbated by occupational dust exposure. RENAL EFFECTS: High altitude is associated with a protective effect in patients with renal disease, although it is unknown how this would affect miners with a history of chronic renal disease from exposure to silica and other renal toxicants. HEMATOLOGICAL EFFECTS: Advanced age increases the risk of erythrocytosis and chronic mountain sickness in miners. Thrombotic and thromboembolic events are also more common at high altitude. MUSCULOSKELETAL EFFECTS: Miners are at increased risk for low back pain due to occupational factors, and the easy fatigue at altitude has been reported to further predispose workers to this disorder. TOXIC EXPOSURES: Diesel emissions at altitude contain more carbon monoxide due to increased incomplete combustion of fuel. In addition, a given partial pressure of carbon monoxide at altitude will result in a larger percentage of carboxyhemoglobin at altitude. Miners with a diagnosis of chronic obstructive pulmonary disease may be at higher risk for morbidity from exposure to diesel exhaust at altitude. Both mining and work at altitude have independently been associated with a number of adverse health effects, although the combined effect of mining activities and high altitude has not been adequately studied. Careful selection of workers, appropriate acclimatization, and limited on-site surveillance can help control most health risks. Further research is necessary to more completely understand the risks of mining at altitude and delineate what characteristics of potential employees put them at risk for altitude-related morbidity or mortality.

Poumon du puisatier

PubMed Central

Elidrissi, Amal Moustarhfir; Zaghba, Nahid; Benjelloun, Hanane; Yassine, Najiba

2016-01-01

Le puisatier a pour profession le creusement et l'entretien des puits pour fournir de l'eau. Il est au contact de divers minerais, particulièrement la silice, particule qui présente un risque certain de développement des maladies pulmonaires connues sous le nom de silicose. Le but de notre travail est de préciser le profil épidémiologique, clinique, radiologique et évolutif des patients puisatiers silicotiques. C'est une étude rétrospective concernant 54 cas de puisatiers ayant une silicose, colligés au service des maladies respiratoires du CHU Ibn Rochd de Casablanca, de Mars 1997 à Janvier 2016. Tous les malades étaient des puisatiers, de sexe masculin, avec une moyenne d'âge de 50 ans. Le tabagisme était retrouvé dans 36 cas et un antécédent de tuberculose était noté dans huit cas. La radiographie thoracique retrouvait des grandes opacités dans 39 cas, des petites opacités dans 15 cas, et un épaississement des septats dans 11 cas. Ce tableau de silicose s'était compliqué d'une surinfection bactérienne dans 37% des cas, d' un pneumothorax dans 4% des cas et d'une tuberculose dans 20% des cas. La prise en charge thérapeutique était celle des complications. La déclaration de la maladie professionnelle et de l'indemnisation était faite. L'évolution était bonne dans 12 cas, stationnaire dans 17 cas et mauvaise dans 16 cas. La silicose est une pneumoconiose fréquente chez les puisatiers. Elle retentit sur la fonction respiratoire. Nous soulignons l'association fréquente de tuberculose et nous insistons sur la prévention qui reste le meilleur traitement. PMID:28292119

Intraluminal fibrosis in interstitial lung disorders.

PubMed Central

Basset, F.; Ferrans, V. J.; Soler, P.; Takemura, T.; Fukuda, Y.; Crystal, R. G.

1986-01-01

The histopathologic and ultrastructural features of intraluminal organizing and fibrotic changes were studied in open lung biopsies and autopsy specimens from 373 patients with interstitial lung disorders, including hypersensitivity pneumonitis (n = 44), idiopathic pulmonary fibrosis (n = 92), collagen-vascular diseases (n = 20), chronic eosinophilic pneumonia (n = 10), pulmonary histiocytosis X (n-90), pulmonary sarcoidosis (n = 62), pneumoconioses (n = 25), Legionnaire's disease (n = 5), drug- and toxin-induced pneumonitis (n = 4), radiation-induced pneumonitis (n = 2), lymphangioleiomyomatosis (n = 11), and chronic organizing pneumonia of unknown cause (n = 8). Three patterns of intraluminal organization and fibrosis were recognized: 1) intraluminal buds, which partially filled the alveoli, alveolar ducts and/or distal bronchioles; 2) obliterative changes, in which loose connective tissue masses obliterated the lumens of alveoli, alveolar ducts or distal bronchioles, and 3) mural incorporation of previously intraluminal connective tissue masses, which fused with alveolar, alveolar ductal, or bronchiolar structures and frequently became reepithelialized. All three patterns had common morphologic features, suggesting that, regardless of their severity, they resulted from a common pathogenetic mechanism, ie, the migration of activated connective tissue cells, through defects in the epithelial lining and its basement membrane, from the interstitial into the intraluminal compartment. Intraluminal buds were observed most frequently in hypersensitivity pneumonitis, chronic eosinophilic pneumonia, and organizing pneumonia of unknown cause. Mural incorporation and, to a lesser extent, obliterative changes were observed in most interstitial disorders and were very prominent in idiopathic pulmonary fibrosis. Mural incorporation and obliterative changes play an important role in pulmonary remodeling, especially when several adjacent alveoli and/or other air spaces are involved. Under these circumstances, intraluminal organization can mediate the fusion of adjacent alveolar structures by intraluminal connective tissue. Images Figure 15 Figure 9 Figure 10 Figure 16 Figure 17 Figure 1 Figure 2 Figure 3 Figure 4 Figure 18 Figure 5 Figure 6 Figure 7 Figure 8 Figure 19 Figure 20 Figure 11 Figure 12 Figure 13 Figure 14 PMID:3953768

Diagnosis, monitoring and prevention of exposure-related non-communicable diseases in the living and working environment: DiMoPEx-project is designed to determine the impacts of environmental exposure on human health.

PubMed

Budnik, Lygia Therese; Adam, Balazs; Albin, Maria; Banelli, Barbara; Baur, Xaver; Belpoggi, Fiorella; Bolognesi, Claudia; Broberg, Karin; Gustavsson, Per; Göen, Thomas; Fischer, Axel; Jarosinska, Dorota; Manservisi, Fabiana; O'Kennedy, Richard; Øvrevik, Johan; Paunovic, Elizabet; Ritz, Beate; Scheepers, Paul T J; Schlünssen, Vivi; Schwarzenbach, Heidi; Schwarze, Per E; Sheils, Orla; Sigsgaard, Torben; Van Damme, Karel; Casteleyn, Ludwine

2018-01-01

The WHO has ranked environmental hazardous exposures in the living and working environment among the top risk factors for chronic disease mortality. Worldwide, about 40 million people die each year from noncommunicable diseases (NCDs) including cancer, diabetes, and chronic cardiovascular, neurological and lung diseases. The exposure to ambient pollution in the living and working environment is exacerbated by individual susceptibilities and lifestyle-driven factors to produce complex and complicated NCD etiologies. Research addressing the links between environmental exposure and disease prevalence is key for prevention of the pandemic increase in NCD morbidity and mortality. However, the long latency, the chronic course of some diseases and the necessity to address cumulative exposures over very long periods does mean that it is often difficult to identify causal environmental exposures. EU-funded COST Action DiMoPEx is developing new concepts for a better understanding of health-environment (including gene-environment) interactions in the etiology of NCDs. The overarching idea is to teach and train scientists and physicians to learn how to include efficient and valid exposure assessments in their research and in their clinical practice in current and future cooperative projects. DiMoPEx partners have identified some of the emerging research needs, which include the lack of evidence-based exposure data and the need for human-equivalent animal models mirroring human lifespan and low-dose cumulative exposures. Utilizing an interdisciplinary approach incorporating seven working groups, DiMoPEx will focus on aspects of air pollution with particulate matter including dust and fibers and on exposure to low doses of solvents and sensitizing agents. Biomarkers of early exposure and their associated effects as indicators of disease-derived information will be tested and standardized within individual projects. Risks arising from some NCDs, like pneumoconioses, cancers and allergies, are predictable and preventable. Consequently, preventative action could lead to decreasing disease morbidity and mortality for many of the NCDs that are of major public concern. DiMoPEx plans to catalyze and stimulate interaction of scientists with policy-makers in attacking these exposure-related diseases.

The “geotoxicology” of airborne particulate matter: implications for public health, public policy, and environmental security (Invited)

NASA Astrophysics Data System (ADS)

Plumlee, G. S.; Morman, S. A.

2009-12-01

Exposures to airborne particulate matter (PM) have been documented and hypothesized as the cause of a wide variety of adverse health effects. Most attention has focused on potential health effects of occupational and environmental exposures to many types of anthropogenic PM, such as mineral dusts or combustion byproducts of fossil fuels. However, geogenic PM (produced from the Earth by natural processes) and geoanthropogenic PM (produced from natural sources but modified by human activities) are also increasingly of concern as potential agents of toxicity and disease, via both environmental and occupational exposures. Geotoxicology can be defined as the study of the toxicological characteristics and potential health effects of geogenic and geoanthropogenic earth materials. Acute exposures to high PM concentrations are associated with exacerbated asthma, other pulmonary inflammatory responses, cardiovascular problems, and other issues. Some diseases can result from inhalation of dust-borne pathogens. PM can contain bioaccessible (readily dissolved in the body’s fluids) contaminants that, if absorbed in sufficient doses, can trigger toxicity. Acutely bioreactive PM, such as alkaline wildfire ash or acidic volcanic fog, can trigger acute irritation or damage of the respiratory tract, eyes, and skin. Biodurable PM such as asbestos fibers and crystalline silica are poorly cleared by lung macrophages, do not readily dissolve in the fluids lining the lungs, and can therefore persist in the lungs for decades. In sufficient dose, pneumoconioses can result from exposure to biodurable minerals, and chronic fluid-mineral reactions in the body (such as redox cycling and formation of free radicals) are thought to help promote cancers such as lung cancer and (in the case of asbestos) mesothelioma. Many key research questions remain, such as the exact mechanisms by which many types of PM cause disease, or the levels of exposure above which various types of PM begin to pose a substantial public health risk. PM is at the core of diverse policy issues related to air quality, public health, and environmental security, at scales from local to global. Interdisciplinary earth and health science investigations are crucial to the development of effective policy. For example, earth science input will be key for understanding and managing potential risks associated with living on or near asbestos-containing rocks. Particularly in dry climates, a better understanding of the roles of geogenic PM versus anthropogenic PM as triggers of disease is needed in the development of appropriate air quality regulations at local to regional scales; this issue will only increase in importance in the future as human inhabitation increases in some arid regions, and as arid regions expand or shift due to climate change or human-induced stresses. Over the last decade, it has been recognized that dusts can transport contaminants and pathogens between continents. Hence, human practices and policies that influence dust generation in one continent or country may ultimately have an impact on public health, policy, and environmental security in distant downwind countries.

[The preparation and characterization of fine dusts carried out in the Clinica del Lavoro di Milano in support of experimental studies].

PubMed

Occella, E; Maddalon, G; Peruzzo, G F; Foà, V

1999-01-01

This paper aims to illustrate the conditions selected at the Clinica del Lavoro of the University of Milan to prepare and analyze a large number of fine dust samples produced over a period of about 50 years, that were initially used for studies within the Clinic performed in its own facilities, and since 1956 were sent to other Italian and overseas laboratories (Luxembourg, UK, Germany, Norway, Sweden, South Korea, USA). The total quantity of material distributed (with maximum size 7-10 microns) was about 2 kg and consisted of the following mineral and artificial compounds: quartz, HF-treated quartz, tridymite, HF-treated tridymite, cristobalite, chromite, anthracite, quartz sand for foundry moulds, sand from the Lybian desert, vitreous silica, pumice, cement, as well small quantities of metallic oxides, organic resins, chrysotile, crocidolite, fibres (vitreous, cotton and polyamidic). About half of the entire quantity of dusts produced consisted of partially HF-treated tridymite. Initially, research on the etiology of silicosis used quartz dust samples, simply sieved or ventilated (consisting of classes finer than 0.04 mm, containing a 15-20% respirable fraction). From 1956 to 1960 the dusts were produced by manual grinding in an agate mortar, below about 10 microns, starting from quartz from Quincinetto (near Ivrea, Province of Turin), containing about 99.5% quartz: particle size and composition were checked using an optical-petrographic technique, with identification of the free and total silica content. Subsequently, the dusts used for biological research were obtained by grinding coarse material with a cast iron pestle and planetary mills, agate and corundum jars. The grinding products were sized by means of centrifugal classification, using the selector developed by N. Zurlo, ensuring control of dust size both optically and by means of wet levigators and hydraulic classifiers (in cooperation with the Institute of Mines of Turin Polytechnic School). After 1990 pestles and rotating drum mills with autogenic grinding load were used for grinding: the size of the treated samples was reduced to 0.05 mm and an extremely fine fraction was extracted, smaller than 7-10 microns, which was used for pneumoconioses research. The characterization of the dust produced was in any case achieved by means of preliminary examination under the optical microscope (polarized light, sometimes supplemented with phase contrast), followed by quantitative analysis using chemical/petrographic, chemical diffraction or, more commonly, petrographic/diffraction techniques. Microscopic examination, if necessary supplemented with photo-micrography, was also used for particle size control, for numerical counting and subsequent reference to weight proportion. For all operational procedures the essential data on instruments and methods are reported. During studies on production, separation of fine dusts and their characterization, partly performed with support from the European Community (EEC/European Coal and Steel Commission), the following topics in particular were addressed: connections between particle size and free silica content in the measurable dust size fraction of the grinding products and in airborne dusts; characteristics of the dusts and risk indices in Italian iron and pyrite mines; possibility of abatement of the ultrafine classes of airborne dusts in pneumatically filled stopes by the addition of salts; comparison of the latest dust selectors used within the European Community; influence of the grinding methods on the results of fibrous and soft mineral measurement using X-ray diffraction analysis.